327 40 Kearney Fuse Links
29591-Attachment 29591-Attachment 29591-Attachment 051712 Batch5 unilog cesco-content
117972-Attachment 117972-Attachment 117972-Attachment 051712 Batch6 unilog cesco-content
126492-Attachment 126492-Attachment 126492-Attachment Batch9 unilog cesco-content
99579-Attachment 99579-Attachment 99579-Attachment 051712 Batch4 unilog cesco-content
2014-06-02
: Pdf 101656-Attachment 101656-Attachment 051712 Batch4 unilog
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Technical Data 327-40 Effective March 2014 Supersedes December 2013 Kearney™ fuse links General Eaton's Cooper Power Systems Kearney™ fuse links can be applied to a variety of applications requiring overcurrent protection of distribution systems and equipment. When properly coordinated with other overcurrent protective devices, sectionalizing to isolate faulted feeder branches or equipment can be accomplished. Kearney fuse links are available in a variety of types offering a wide selection of operating characteristics. The links incorporate low melting temperature elements, captive washers, highresistance strain wires, and color-coded high strength tubes. The low temperature melting tin elements enhance overload capability by guaranteeing non-damageability of the fuse tubes. These elements are capable of absorbing vibration as well as thermal shock due to current surges and heating and cooling throughout the daily load cycle. They can be further distinguished by their years of superior service proven by Time Current Characteristic (TCC) Curve verification of aged fuse links. Consult your Eaton's Cooper Power Systems sales representative for more details. The fuse links have been designed and tested to the IEEE Std C37.42™ standard. The following are the types of fuse links offered: • Type K • Type T • Type 200™ (N) • Type KS • Type SQ • Type QA™ • Type X • Secondary Indicating Fuses Technical Data 327-40 Kearney fuse links Effective March 2014 Internal construction All Kearney fuse links are designed with low melting temperature element components of either tin or solder filled dual element construction. Each element material shipment from our supplier is accompanied with a certification of quality and composition. The diameter is verified in incoming inspection. Low melting temperature fuse links Types K, T, 200, X and KS have exceptional overload capability. They are designed to carry 150% of their continuous current rating continuously without damage to the fuse link itself or to the cutout fuseholder in which they are installed. (Care should be exercised so that the current rating of the cutout is not exceeded.) Tin element Links using pure tin elements have a precision gauged strain wire crimped in parallel to provide tension loading properties. The tin element is soldered into position providing the industry’s best possible electrical connection between the element and its terminals. The low melting temperature of the tin allows all of the fuse link components to operate at a lower temperature while providing long term reliable TCC. REMOVABLE BUTTONS Allow fuse links to be used in all open and enclosed cutouts, including cutouts with arcshortening rods. CAPTIVE WASHER Will not fall off prior to or during installation. (Can be removed for use where 1/2" button or no button is required.) AMPERE SIZE Marked on top of screw terminal, so that it can be seen after the fuse link is installed in a fuseholder. IDENTIFICATION Fuse link type, ampere size and date of manufacture marked on periphery of screw terminal. SWAGED FERRULE Extends around fuse link tube to ensure single end expulsion on low fault currents. Dual element There are two dual element designs. The dual element design for 1 and 2 A K, KS, X, T, 200 (N), QA, and SQ 0.2 A - 1.45 A link assemblies is composed of a heater coil mounted around a solder pot that is soldered to a fuse element. Types KS and X links above 2 A and SQ links above 1.4 A have two wire elements in series which are axially inserted into a soldered coil. Dual element links which use solder coils are mechanically crimped to the body and screw terminals. The elements are inserted into the coil and meticulously gauged to assure that active element lengths are maintained. The soldering process then permanently sets the active elements to the proper TCC curve and guarantees positive electrical continuity. FUSE LINK TYPE Marked on length of tube to aid in identification of fuse type. COLOR CODE High bust strength tube color coded for each fuse link to minimize the potential of installing wrong fuse link type. SPRING On all fuse links through 25 A to aid in clearance of low level faults by ejecting the fuse cable and creating a positive element separation. Dual elements allow the fuse to respond as low temperature single element fuses for long time overloads, yet have superior lightning surge withstand capability. Both types of links have up to 26 times more surge withstand capability than single element fuse links. Final construction After passing in-process QA checks, high strength color coded tubes are swaged to both the single and dual element fuse links. A unique self locking washer and button is attached to the screw terminal. Every fuse link is axial pull tested to verify mechanical strength before packaging in the Kearney unique “lineman friendly” pull-tab fuse packs. Fuse link selection Type K (tube color brown) Kearney Type K fuse links have been tested to the IEEE Std C37.42™ standard requirements for a “fast” fuse. The nominal speed ratio of Type K fuse links is 7. Type K fuse links are well suited where “fast” time-current characteristics are desired such as for capacitor protection. Figure 1. Fuse link features. Type 200 (N) (tube color green) Kearney Type 200 fuse links are classified as “medium” speed fuses, with a nominal speed ratio of 10. Type 200 fuse links provide more surge withstand capability than Type K links, and provide good coordination possibilities with relays and reclosers. 2 www.cooperpower.com Type QA (tube color yellow) Kearney Type QA fuse links are classified as “medium” speed fuse links with a nominal speed ratio of 10. Type QA fuse links will carry 100% of the rated current continuously without damage, and provide good coordination possibilities with relays and reclosers. Technical Data 327-40 Kearney fuse links Effective March 2014 Type T (tube color white) Kearney Type KS fuse links employ dual element construction which gives the Type KS high surge withstand capability, and a nominal speed ratio of 20. Classified as “very slow” fuse links, the Type KS has greater surge current withstand capability than the Type T, and is a good choice for line fusing and transformer protection. Type X (tube color orange) and Type SQ (tube color brown) Kearney Type X and SQ fuse links are specially designed for transformer protection. Type X and SQ fuse links employ dual element construction, which allows the time- current characteristic to be carefully shaped to closely match the IEEE Std C57.91™ standard loading curve for transformers while providing excellent surge withstand to avoid nuisance blowing from lightning and switching surges. The nominal speed ratio of the Type X and SQ fuse links is 32. Packaging All fuse links are packed in individual cartons for the maximum protection and ease of use. Cartons are perforated for easy opening. Fuse links can be removed with gloves on. Fuse Link Type and Ampere Ratings are clearly marked on the carton. The print will not smear or run. Five Pack Sleeves: Fuse Link Type and Ampere Rating are clearly marked on box front and end of cartons. Individual cartons are tabbed so that remaining fuses stay securely in the carton as others are removed. Overcartons: All fuse links 100 A and below are packed in protective overcartons 25 per box. Catalog Number, Fuse Link Type, Ampere Rating, and Date of Manufacture are marked on the label for ease of selection. NNote: SQ links are individually packaged in transparent plastic bags. Bagged fuses are packed in an overcarton for protection and ease of handling. The catalog number, fuse type and amp rating are clearly marked on each bag and on all cartons. 3.5 A 1 Minute Type KS (tube color light-blue) Current in Amperes: x 1 at 25 kV. 1000 50 A 100 10 Time in Seconds Kearney Type T fuse links have been tested to the IEEE Std C37.42™ standard requirements for a “slow” fuse link. The nominal speed ratio of Type T fuse links is 12. Type T fuse links provide slower timecurrent characteristics than Types K, 200, and QA, and coordinate well with relays and reclosers. 1 0.1 K X 0.01 0.5 1 10 100 SQ QA 200 T KS 1000 10000 Figure 2. This chart compares the six speed ratios available with standard fuse link types which are fully adaptable to various coordination needs. Table 1. Speed Ratio Tin Element(s) Slow T Designation Fast Comparative melting speed ratio chart Type Electrical equipment such as transformers, switches, relays, and conductors are exposed to various levels of current during normal operation. Generally, electrical devices can withstand high currents for a short period of time and low current for longer periods of time without thermal or mechanical damage. The ability to withstand various levels of current for various periods of time is referred to as time-current characteristics. Speed Ratio Dual Element Medium Slow Very Slow Extra Slow K 200, QA 6-8 7-11 T KS X, SQ 10-13 20 32 Coordination of power systems involves the selection of fuse links to protect equipment with various time-current characteristics while coordinating with reclosers, circuit breakers, sectionalizers, relays, and other fuses. Kearney offers six types of fuse links with a wide range of time-current characteristics (refer to Table 1). The speed ratio of all fuse link sizes 100 A and below is the ratio between the current that melts the fuse in 0.1 seconds to the current that melts the fuse in 300 seconds. The higher the ratio, the slower the speed of melting. For fuses rated above 100 A, the speed ratio is between the melting currents at 0.1 second and 600 seconds. www.cooperpower.com 3 Technical Data 327-40 Kearney fuse links Effective March 2014 Ordering information Table 2. Fit-All™ Fuse Link Ordering Information Table 3. Trip-O-Link™ Fuse Link Ordering Information Current Rating Type X Type SQ Type KS Type 200 Type QA Type K 0.2 0.3 0.33 0.4 0.5 0.6 0.7 0.75 1 1.25 1.3 1.4 1.5 1.6 2 2.1 2.5 2.75 3 3.1 3.5 4 4.2 5 5.2 5.5 6 6.3 7 7.8 8 10 10.4 12 14 15 20 21 25 30 32 40 46 50 60 65 75 80 85 100 125 140 150 175 200 — — 41033CPS — 41050CPS — — 41075 41100CPS 41125 — — 41150 — 41200 — 41250CPS 41275CPS — — 41350 41400 — — — 41550 — — 41007CPS — — 41010CPS — — — 41015CPS — — — — — — — — — — — — — — — — — — — 02SQ-60 03SQ-60 —— 04SQ-60 — 06SQ-60 07SQ-60 — 10SQ-60 — 13SQ-60 14SQ-60 — 16SQ-60 — 21SQ-60 — — — 31SQ-60 — — 42SQ-60 — 52SQ-60 — — 63SQ-60 70SQ-60 78SQ-60 — — 104SQ-60 — 140SQ-60 — — 210SQ-60 — — 320SQ-60 — 460SQ-60 — — — — — — — — — — — — — — — — — — — — 21001 — — — — — 21002 — — — 21003 — — — — 21005 — — 21006 — 21007 — — 21010CPS — — — 21015 21020 — 21025 21030 — 21040 — 21050CPS — 21065 — 21080CPS — 21100CPS 21125 — 21150CPS — 21200CPS — — — — — — — — 11001 — — — — — 11002 — — — 11003 — — — — 11005 — — — — 11007 — 11008 11010 — — — 11015 11020 — 11025 11030 — 11040CPS — 11050 — 11065 11075 11080 11085 11100 11125 — 11150 11175 11200 — — — — — — — — 6413-2T — — — — — 6414-2T — — — 6415-2T — — — — 6416-2T — — — — 6417-2T — 6417-8-2T 6418-2T — — — 6419-2T 6420-2T — 6421-2T 6422-2T — 6423-2T — 6424-2T 6425-2T — 6426-2T — — 6427-2T 6428-2T — 6429-2T 6724-2T 6725-2T — — — — — — — —— 31001 — — — — — 31002CPS — — — 31003CPS — — — — 31005 — — 31006 — 31007 — 31008 31010 — 31012 — 31015 31020CPS — 31025CPS 31030CPS — 31040CPS — 31050CPS — 31065CPS — 31080CPS — 31100CPS — 31140 — — 31200 Type T — — — — — — — — 51001CPS — — — — — 51002 — — — 51003 — — — — 51005CPS — — 51006 — 51007 — 51008CPS 51010CPS — 51012 — 51015 51020CPS — 51025 51030CPS — 51040CPS — 51050CPS — 51065CPS — 51080CPS — 51100 — 51140 — — 51200 Notes: 1. Fit-All fuse links listed above have removable button heads. For non-removable button heads add “A” in front of the part number. Exceptions: Non-removable button heads are not available for Types X, SQ, QA links or 125 A, 150 A and 200 A Type 200 links. 2. Fit-All fuse links listed above are all 23” (584 mm) long. For 26” (660 mm) long fuses links add -29, except the SQ links. For SQ links add -26. 4 www.cooperpower.com Current Rating Type X Type KS Type 200 Type QA Type K Type T .33 42033 — — — — — .50 42050 — — — — — .75 42075 — — — — — 1.00 42100 22001 12001 6813 32001 52001 1.25 42125 — — — — — 1.50 42150 — — — — — 2 42200 22002 12002 6814 32002 52002 2.50 42250 — — — — — 2.75 42275 — — — — — 3 — 22003 12003 6815 32003 52003 3.50 42350 — — — — — 4 42400 — — — — — 5 — 22005 12005 6816 — — 5.50 42550 — — — — — 6 — — — — 32006 52006 7 42007 22007 12007 6817 — — 8 — — — — 32008 52008 10 42010 22010 12010 6818 32010 52010 12 — — — — 32012 52012 15 42015 22015 12015 6819 32015 52015 20 — 22020 12020 6820 32020 52020 25 — 22025 12025 6821 32025 52025 30 — 22030 12030 7482 32030 52030 40 — 22040 12040 7483 32040 52040 50 — 22050 12050 7484 32050 52050 Technical Data 327-40 Kearney fuse links Effective March 2014 Table 4. Fit-All Fuse Link Dimensions B A* Inches (mm) B* Inches (mm) C* Inches (mm) D* Inches (mm) F* Inches (mm) L* Inches (mm) X, KS, T, K, 200, QA .50 (13) .75 (19) 5.38 (137) .27 (6.8) 1.13 (29) 23.00 (584) 2.50 to 15 X .50 (13) .75 (19) 5.38 (137) .31 (7.7) 1.13 (29) 23.00 (584) 3 to 20 K .50 (13) .75 (19) 5.38 (137) .31 (7.7) 1.13 (29) 23.00 (584) 3 to 25 200, QA, KS, T .50 (13) .75 (19) 5.38 (137) .31 (7.7) 1.13 (29) 23.00 (584) .2 to 1.4 SQ .50 (13) .75 (19) 5.38 (137) .27 (6.8) N/A 23.00 (584) 1.6 to 42 SQ .50 (13) .75 (19) 5.38 (137) .31 (7.7) N/A 23.00 (584) 25 to 50 K .50 (13) .75 (19) 5.38 (137) .31 (7.7) N/A 23.00 (584) 30 to 50 T, KS, 200 .50 (13) .75 (19) 5.38 (137) .31 (7.7) N/A 23.00 (584) 30 to 60 QA .50 (13) .75 (19) 5.38 (137) .31 (7.7) N/A 23.00 (584) 65 to 100 K, T, KS, 200 — .75 (19) 5.38 (137) .40 (10) N/A 23.00 (584) 75 to 150 QA — .75 (19) 5.38 (137) .40 (10) N/A 23.00 (584) 125 to 200 KS, 200 — 1 (25) 6.38 (162) .50 (13) N/A 23.00 (584) 140 to 200 K,T — 1 (25) 6.38 (162) .50 (13) N/A 23.00 (584) 175 to 200 QA — 1 (25) 6.38 (162) .50 (13) N/A 23.00 (584) Current Rating (A) Fuse Link Types .50 to 2 A C L* D F *See Figure 4 Figure 4. Fit-All fuse links. * “L” dimension extends to the end of the fuse leader. 8.5" (216 mm) Figure 3. Trip-O-Link fuse links. www.cooperpower.com 5 Technical Data 327-40 Kearney fuse links Effective March 2014 Indicating type tubular secondary fuses Universal adapter assemblies Indicating type tubular secondary fuses protect transformers and capacitors from secondary overloads and faults. Each secondary fuse has a spring locked red plastic flag which springs out from the cartridge when the fuse link melts, indicating an outage. Fuses are available with insulated or non-insulated leads. This universal adapter assembly will adapt Fit-All™ fuse links for use in the cutouts that have bolt-type cable connections to connect the upper as well as the lower cable. Note from the table that only five sizes are required to adapt to any type fuse. Figure 6. Universal Adapter assemblies. – Flag in operated position Table 6. U-Adapter Assemblies* For Types KS, X, K, T and 200 Fuses – Flag in operational position Figure 5. Tubular secondary fuses. Current Rating (A) Catalog Number 0.33-25 14036 30-50 14036-1 65-100 14036-2 125-150 14036-3 175-200 14036-4 * 10" length for all ampere ratings Table 5. Ordering Information for Indicating Type Tubular Secondary Fuses 6 Current Rating (A) Tinned Leads Insulated Leads 10 8316 8316-5 15 8317 8317-5 20 8318 8318-5 25 8319 8319-5 30 8320 8320-5 40 8321 8321-5 50 8322 8322-5 60 8323 8323-5 75 8324 8324-5 100 8325 8325-5 125 8326 8326-5 150 8327 — 175 8328 — 200 8329 — 300 11405 — www.cooperpower.com Table 7. U-Adapter Assemblies* For Type QA Fuse Current Rating (A) Catalog Number 1-25 14037 30-50 14037-1 60-100 14037-2 125-150 14037-3 175-200 14037-4 * 10" length for all ampere ratings Kearney fuse links Technical Data 327-40 Effective March 2014 Additional Information Refer to the following literature for more information. K-11000 AB Kearney Type N (200) Time Current Characteristic Curves K-21000 AB Kearney Type KS Time Current Characteristic Curves K-31000 AB Kearney Type K Time Current Characteristic Curves K-41000 AB Kearney Type X Time Current Characteristic Curves K-51000 AB Kearney Type T Time Current Characteristic Curves K-6010-32 AB Kearney Type QA Time Current Characteristic Curves K-SQ AB Kearney Type SQ Time Current Characteristic Curves 89012 Tin vs. Silver Links (PD Update No. 5) R327-40-3 Kearney Fuse Links-Coordination Chart for Type 200 Fuse Links R327-40-4 Kearney Fuse Links-Coordination Chart for Type KS Fuse Links R327-40-5 Kearney Fuse Links-Coordination Chart for Type QA Fuse Links R327-40-6 Kearney Fuse Links-Coordination Chart for Type T Fuse Links R327-40-7 Kearney Fuse Links-Coordination Chart for Type T with Type X Fuse Links R327-40-8 Kearney Fuse Links-Coordination Chart for Type N (200) with Type X Fuse Links R327-40-9 Kearney Fuse Links-Coordination Chart for Type KS with Type X Fuse Links R327-40-10 Kearney Fuse Links-Coordination Chart for Type K with Type X Fuse Links R327-40-11 Kearney Fuse Links-Coordination Chart for Type QA with Type X Fuse Links R327-40-12 Kearney Fuse Links-Coordination Chart for Type K Fuse Links www.cooperpower.com 7 Technical Data 327-40 Kearney fuse links Effective March 2014 Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com Eaton’s Cooper Power Systems Business 2300 Badger Drive Waukesha, WI 53188 United States Cooperpower.com © 2014 Eaton All Rights Reserved Printed in USA Publication No. 327-40 Eaton, Cooper Power Systems, 200, QA, Kearney, Trip-O-Link, and Fit-All are valuable trademarks of Eaton in the U.S. and other countries. You are not permitted to use the these trademarks without the prior written consent of Eaton. IEEE Std C37.42™ and IEEE Std C57.91™ standards are trademarks of the Institute of Electrical and Electronics Engineers, Inc., (IEEE). This publication is not endorsed or approved by the IEEE. IEEE® is a registered trademark of the Institute of Electrical and Electronics Engineers, Inc. For Eaton's Cooper Power Systems Kearney fuse link product information, call 1-877-277-47636 or visit: www.cooperpower.com.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Instance ID : uuid:f3134260-6f76-4c67-9d8d-c8ab3be9ac6a Original Document ID : adobe:docid:indd:c8b9d7b6-2ec1-11db-8cee-97036836f52f Document ID : xmp.id:0AD93D4570AFE31196F5D7917E5F08ED Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:09D93D4570AFE31196F5D7917E5F08ED Derived From Document ID : xmp.did:1D84A839E561E311B557F23AC921EA54 Derived From Original Document ID: adobe:docid:indd:c8b9d7b6-2ec1-11db-8cee-97036836f52f Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:03:19 09:13:53-05:00 Create Date : 2014:03:19 09:13:53-05:00 Modify Date : 2014:03:19 09:13:57-05:00 Metadata Date : 2014:03:19 09:13:57-05:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Title : 327-40 Kearney Fuse Links Creator : Eaton's Cooper Power Systems Description : Kearney fuse links can be applied to a variety of applications requiring overcurrent protection of distribution systems and equipment. Subject : kearney, fuse link, type k, type t, type 200, type ks, type qa, type x, secondary inicating fuses, overcurrent Rights : 2013 Eaton. All Rights Reserved. Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 8 Author : Eaton's Cooper Power SystemsEXIF Metadata provided by EXIF.tools