10 17 Electrodes
2017-10-18
: Pdf 10-17-Electrodes 10-17-Electrodes 10 2017 sleeprev uploads wp-content
Open the PDF directly: View PDF 
.
Page Count: 3
6 • sleepreviewmag.com OCTOBER 2017
Company
Dymedix Diagnostics Dymedix Diagnostics
Dynarex
Nihon Kohden America Inc
Product
PerfectFit 3D Disposable Effort Belt Kit
TriplePlay Disposable Airflow
Sensors with FM3 Filtration Module Disposable ECG Snap Electrode NE-134A
Website
www.dymedix.com www.dymedix.com www.dynarex.com us.nihonkohden.com
Type/Technology
Polyvinylidene fluoride (PVDF) film
technology Airflow-snore combination sensor Electrode Electrode
Warranty (months)
24 Module: 12 (sensor: N/A) N/A (disposable) 3
PATIENT
RANGE
Infant
X X X
Pediatric
X X X
Adult
X X X X
Cleaning Instructions
Signal conditioning module may be
cleaned with non-corrosive hospital-ap-
proved disinfectant. The effort belt sen-
sors can be soaked for a short period or
wiped with a disinfecting cloth.
Sensor is a disposable single-use
product. Module can be cleaned with
non-corrosive hospital-approved
disinfectant.
Disposable.
Electrodes: use warm soapy water; rub gently
with gloved fingers or cotton swab. Dry with
cotton cloth; use alcohol for usual cleaning.
Use ethylene oxide gas or invert soap, if disin-
fection (or sterilization) is needed.
Additional Information
Effort belt sensors incorporate PVDF film
technology that provides a more respon-
sive, linear, and stable signal compared
to other effort belts. Kit comes with 5
50-yard rolls of belt strap. Complies
with AASM Technical Specifications.
One Dymedix TriplePlay Airflow Sensor
will detect apnea, hypopnea, and UARS
waveforms. Used in conjunction with
the Dymedix FM3 Filtration Module, a
second output of snore data is provided,
all originating from 1 TriplePlay Airflow
Sensor.
Snap-style electrodes allow for fast and
easy testing. Application for ECG/EKG
monitoring or diagnosis with the con-
nected equipment as medical sensors.
Ag/AgCl coating on electrode surface
for effective signal transmission. Foam
dimensions 50 mm × 55 mm.
Silver/Silver Chloride electrodes, 1.5 mm
touch proof connectors and cable length is
1.5 m. Twelve electrodes per box.
ELECTRODES, MONITORS, & SENSORS
JOIN OUR
SLEEP REVIEW
LINKEDIN
GROUP
Industry Discussions
Article Suggestions
Feedback
OCTOBER 2017 sleepreviewmag.com • 7
Company
Dymedix Diagnostics Dymedix Diagnostics
Dynarex
Nihon Kohden America Inc Philips Respironics Radiometer America Inc Rhythmlink International, LLC Rochester Electro-Medical Inc
Product
PerfectFit 3D Disposable Effort Belt Kit
TriplePlay Disposable Airflow
Sensors with FM3 Filtration Module Disposable ECG Snap Electrode NE-134A LoFlo TCM Tosca
Disposable EEG Electrodes and
Disposable Recording Sticky Pads Disposable GoldSelect EEG Electrodes
Website
www.dymedix.com www.dymedix.com www.dynarex.com us.nihonkohden.com www.philips.com/sleepdx www.radiometer.com/en/products/
transcutaneous-monitoring/tcm-tosca www.rhythmlink.com www.rochestermed.com
Type/Technology
Polyvinylidene fluoride (PVDF) film
technology Airflow-snore combination sensor Electrode Electrode Monitors airflow and CO2
Transcutaneous monitoring measuring
transcutaneous pCO2, oxygen saturation SpO2,
and pulse rate
Electrode Electrode
Warranty (months)
24 Module: 12 (sensor: N/A) N/A (disposable) 3 12 12 N/A (disposable); shelf life of 5 years N/A (disposable)
PATIENT
RANGE
Infant
X X X X X X
Pediatric
X X X X X X X
Adult
X X X X X X X X
Cleaning Instructions
Signal conditioning module may be
cleaned with non-corrosive hospital-ap-
proved disinfectant. The effort belt sen-
sors can be soaked for a short period or
wiped with a disinfecting cloth.
Sensor is a disposable single-use
product. Module can be cleaned with
non-corrosive hospital-approved
disinfectant.
Disposable.
Electrodes: use warm soapy water; rub gently
with gloved fingers or cotton swab. Dry with
cotton cloth; use alcohol for usual cleaning.
Use ethylene oxide gas or invert soap, if disin-
fection (or sterilization) is needed.
Cloth dampened with isopropyl alcohol
70%, a 10% aqueous solution of so-
dium hypochlorite, a 2% glutaraldehyde
solution, ammonia, mild soap, or disin-
fectant spray cleaner. Wipe with clean
water-dampened cloth. Dry.
Wipe sensor head and cable gently with soft cloth
moistened with 70% alcohol. Wipe monitor exterior
and touchscreen surfaces using either 70% isopro-
pyl alcohol, 70% ethanol, or 4% Diversol BX solu-
tion, dissolved in water, on a paper towel or tissue.
Disposable. Disposable.
Additional Information
Effort belt sensors incorporate PVDF film
technology that provides a more respon-
sive, linear, and stable signal compared
to other effort belts. Kit comes with 5
50-yard rolls of belt strap. Complies
with AASM Technical Specifications.
One Dymedix TriplePlay Airflow Sensor
will detect apnea, hypopnea, and UARS
waveforms. Used in conjunction with
the Dymedix FM3 Filtration Module, a
second output of snore data is provided,
all originating from 1 TriplePlay Airflow
Sensor.
Snap-style electrodes allow for fast and
easy testing. Application for ECG/EKG
monitoring or diagnosis with the con-
nected equipment as medical sensors.
Ag/AgCl coating on electrode surface
for effective signal transmission. Foam
dimensions 50 mm × 55 mm.
Silver/Silver Chloride electrodes, 1.5 mm
touch proof connectors and cable length is
1.5 m. Twelve electrodes per box.
No calibration required; cell and filter
are removable; connects easily with a
single USB connection; whisper-quiet.
The system uses a single sensor for continu-
ous monitoring of ventilatory status and oxygen
saturation. Monitor pCO2, SpO2, and pulse rate,
and connects to PSGs for overnight monitoring of
ventilation and oxygen saturation in patients with
SDB. No wait for calibration.
These are reliable, durable, cost effective, and record excep-
tional data quality. With 3 styles to choose from (Deep Cup
EEG Electrode, Slim Cup EEG Electrode, and Flat Webbed EEG
Electrode), you can customize the product for each patient.
Add Recording Sticky Pads, available in 2 sizes and various
lead wire lengths, for general EMG, chin, legs, etc. Free
samples and cost analysis assistance upon request.
Designed with sleep technologists in mind,
premium, 24k gold plated cups, 10 wire
colors per package, available in 4, 5, 6,
and 10 ft lead wire lengths. Call for free
samples.
8 • sleepreviewmag.com OCTOBER 2017
Company
SenTec SLP VirtuOx Inc
Product
SenTec Digital Monitoring System (SDMS)
with V-Sign Sensor
SleepSense Disposable Inductive
System VPOD VeriSleep VPROBEs
Website
www.sentec.com www.sleepsense.com www.virtuox.net www.virtuox.net
Type/Technology
Digital Severinghaus electrode-
reflective pulse oximetry combination Inductive plethysmography Chain of custody solution
for HST equipment
Compatible reusable/disposable
probes
Warranty (months)
Sensor: 18 Buckle: 12; Belts: N/A (disposable) 12 3
PATIENT
RANGE
Infant
X X
Pediatric
X X
Adult
X X X X
Cleaning Instructions
Provided with product; clean with alcohol wipe.
Wipe the reusable buckle with any
cleanser that is non-corrosive to
plastic. Belts are disposable.
The probe, cable, and VeriSleep device
may be cleaned with non-corrosive,
hospital-approved disinfectant.
The probe may be cleaned with
non-corrosive, hospital-approved
disinfectant.
Additional Information
Combining tcPCO2, SpO2, and pulse rate in a single
digital sensor, SDMS enables accurate (overnight)
assessment of ventilation and oxygenation status.
The SenTec V-Sign Sensor provides low techni-
cal drift and reliable measurement performance.
Calibration interval of up to 12 hours enables a
complete overnight study without interruption.
Disconnect the V-Sign Sensor from adapter cable
for up to 30 minutes and reconnect without
calibration request. Connect the SDMS with your
existing poly(somno)graphy system to retrieve the
SDMS’s readings and/or use the included V-STATS
software for subsequent data download, analysis,
and reports including split-night analysis.
The SleepSense Disposable Inductive
System features pre-cut disposable
belts in 2 adult sizes (120 cm, 150
cm). The Reusable Inductive Interface
Buckle is designed with 2 easy open
tabs that securely hold the belt in
place and allow for easy adjustment.
Available for nearly any PSG.
VPOD VeriSleep device ensures that
the correct patient is wearing the
HST device. It is compatible with
most HST devices on the market
today.
Get compatible reusable and
disposable probes at a 25% cost
savings compared to several
name brands.
ELECTRODES, MONITORS, & SENSORS
1. Publication Title: Sleep Review
2. Publication Number: 0022-831
3. Filing Date: September 29, 2017
4.
5. Number of Issues Published Annually: 8
6. Annual Subscription Price: Free to Qualified
7.
8.
9.
10.
11.
12.
13.
15. Extent and Nature of Circulation
22,517 21,311
0 0
0 0
c.
11,861 11,773
d.
0 0
e. 9,813 9,027
f. 21,674 20,800
g.
843 511
h. 22,517 21,311
i. 54.72% 56.60%
17.
Date
9/29/17
United States Postal Service
Statement of Ownership, Management, and Circulation (Requester Publications Only)
Issue of Frequency: Jan, Feb, Mar/Apr, May, Jun/Jul, Aug/Sept, Oct, Nov/Dec
Complete Mailing Address of Known Office of Publication (Not Printer): MEDQOR LLC, 4303 W 119th
St, Leawood, KS, Johnson County, 66209
Contact Person: Pam Ayers
Telephone: 913-955-2749
14. Issue Date for Circulation Data: Aug/Sept 2017
Complete Mailing Address of Headquarters or General Business Office of Publisher (Not Printer): MEDQOR LLC4303 W 119th St,
Leawood, KS, Johnson County, 66209
Full Names and Complete Mailing Addresses of Publisher, Editor, and Managing Editor - Publisher: Roy Felts, 4303 W 119th St, Leawood, KS,
Johnson County, 66209; Editor: Sree Roy, 4303 W 119th St, Leawood, KS, Johnson County, 66209; Managing Editor: , 4303 W 119th St,
Leawood, KS, Johnson County, 66209
Owner - Full name and complete mailing address: MEDQOR LLC, 4303 W 119th St, Leawood, KS 66209; , ,
Known Bondholders, Mortgagees, and Other Security Holders Owning or Holding 1 Percent or More of Total Amount of Bonds,
Mortgages or Other Securities: None
Tax Status (For completion by nonprofit organizations authorized to mail at nonprofit rates) (Check one)
The purpose, function, and nonprofit status of this organization and the exempt status for federal income tax purposes: N/A
Publication Title: Sleep Review
Average No. Copies
Each Issue During
Preceding 12 Months
No. Copies of Single
Issue Published Nearest
to Filing Date
a. Total Number of Copies (Net press run)
b. Legitimate Paid and/or Requested Distribution (By Mail and Outside the Mail)
(1) Outside County Paid/Requested Mail Subscriptions stated on PS Form 3541. (Include direct written
request from recipient, telemarketing and Internet requests from recipient, paid subscriptions including
nominal rate subscriptions, employer requests, advertiser’s proof copies, and exchange copies.)
11,861
11,773
(2) In-County Paid/Requested Mail Subscriptions stated on PS Form 3541. (Include direct written request
from recipient, telemarketing and Internet requests from recipient, paid subscriptions including nominal
rate subscriptions, employer requests, advertiser’s proof copies, and exchange copies.)
(3) Sales Through Dealers and Carriers, Street Vendors, Counter Sales, and Other Paid or Requested
Distribution Outside USPS®
0
0
(4) Requested Copies Distributed by Other Mail Classes Through the USPS (e.g. First-Class Mail®)
Total Paid and/or Requested Distribution (Sum of 15b (1), (2), (3), and (4))
Nonrequested Distribution (By Mail and Outside the Mail)
(1) Outside County Nonrequested Copies Stated on PS Form 3541 (include Sample copies, Requests
Over 3 years old, Requests induced by a Premium, Bulk Sales and Requests including Association
Requests, Names obtained from Business Directories, Lists, and other sources)
9,813
9,027
(2) In-County Nonrequested Copies Stated on PS Form 3541 (include Sample copies, Requests Over 3
years old, Requests induced by a Premium, Bulk Sales and Requests including Association Requests,
Names obtained from Business Directories, Lists, and other sources)
(3) Nonrequested Copies Distributed Through the USPS by Other Classes of Mail (e.g. First-Class Mail,
Nonrequestor Copies mailed in excess of 10% Limit mailed at Standard Mail® or Package Services
Rates)
0
0
(4) Nonrequested Copies Distributed Outside the Mail (Include Pickup Stands, Trade Shows, Showrooms
and Other Sources)
0
0
Total Nonrequested Distribution
(Sum of 15d (1), (2), (3), and (4))
Total Distribution (Sum of 15c and 15e)
Copies not Distributed
Total (Sum of 15f and g)
I certify that all information furnished on this form is true and complete. I understand that anyone who furnishes false or misleading information on
this form or who omits material or information requested on the form may be subject to criminal sanctions (including fines and imprisonment) and/or
civil sanctions (including civil penalties).
Percent Paid and/or Requested Circulation (15c divided by 15f times 100)
Publication of Statement of Ownership for a Requester Publication is required and will be printed in the
October 2017
issue of this publication.
18. Signature and Title of Editor, Publisher, Business Manager, or Owner
Pam Ayers, Dir, Data Operations
