103594 Catalog
2014-09-27
: Pdf 103594-Catalog 103594-Catalog 639889 Batch8 unilog
Open the PDF directly: View PDF 
.
Page Count: 746
| Download | |
| Open PDF In Browser | View PDF |
Dear Sir or Madam, Here at the Friedhelm Loh Group, one of our corporate principles is: “We view our customers as partners who determine the success of the company”. Our goal is to solve your challenges. Our products and services are uncompromising in terms of quality, technical execution, range and availability. Our dedicated employees around the globe are fully committed to this principle on a daily basis. With us as market leaders on your side, you benefit from our innovative strength. We can make you faster and better. As well as launching a slew of new products, we have also consistently refined the unique Rittal value chain. Act now to rationalise your planning with engineering software and a data portal from Eplan, and use “Rittal – The System.” for fast, efficient generation of your power distribution systems and controllers. Our software will help you to calculate climate control data and select the most appropriate cooling unit, and we now offer support with intelligent machine tools from Kiesling. We are committed to making your processes more efficient in every respect, from A to Z. Rittal is also unveiling another world first for your success – the standardised data centre RiMatrix S. True to our motto “Faster – better – everywhere.”, it eliminates the need for long planning and installation times. We can install a TÜV-tested data centre in a matter of weeks rather than months. The Rittal Catalogue is here to help you compile products and corresponding system accessories quickly and successfully. Thank you for your invaluable feedback and suggestions, and we look forward to developing more innovations together. Wishing you every success Yours Friedhelm Loh Owner and CEO Friedhelm Loh Group 2 3 4 Rittal Catalogue 34 Enclosures from page 15 Small enclosures............................................................ 23 Compact enclosures...................................................... 41 Enclosure systems ......................................................... 55 IT enclosure systems/housings...................................... 85 Console systems/PC enclosure systems/IW................ 107 Operating housings/support arm/stand systems......... 123 Hygienic Design........................................................... 169 Stainless steel .............................................................. 175 Ex enclosures............................................................... 191 Power distribution from page 197 Busbar systems ........................................................... 205 RiLine ........................................................................... 211 Ri4Power ...................................................................... 267 Ri4Power distribution enclosures................................. 297 Climate control from page 307 Cooling with ambient air .............................................. 315 Cooling units ................................................................ 333 Cooling with water........................................................ 353 Enclosure heaters ........................................................ 366 Climate control accessories......................................... 369 IT infrastructure from page 387 RiMatrix S ..................................................................... 397 IT enclosure systems/housings.................................... 405 IT power ....................................................................... 407 IT cooling ..................................................................... 427 IT monitoring ................................................................ 445 IT security solutions ..................................................... 465 Software & services from page 477 Value chain .................................................................. 479 Software ....................................................................... 495 Service ......................................................................... 501 Quality management.................................................... 504 System accessories from page 507 Technical information................................................... 722 List of model numbers ................................................. 725 Index ............................................................................ 735 Rittal Catalogue 34 5 6 Rittal Catalogue 34 nextlevel Step one in the value chain Eplan are global providers of high-tech, software-based engineering solutions. Use Eplan to optimise your engineering and accelerate your product generation process. Eplan – efficient engineering. ◾ EPLAN Engineering Center ◾ EPLAN electric P8 ◾ EPLAN PPE ◾ EPLAN Pro Panel ◾ EPLAN Fluid ◾ EPLAN Harness proD Rittal Catalogue 34 ◾ EPLAN Data Portal 7 The System. 8 Rittal Catalogue 34 nextlevel Step two in the value chain With Eplan and Rittal, you benefit from integrated engineering solutions based on top-quality system components, component data, system know-how + and design expertise throughout every aspect of “Rittal – The System.” Rittal – The System. ◾ Enclosure systems ◾ TopTherm cooling units, TÜV-tested ◾ Ri4Power power distribution to IEC 61 439 ◾ RiMatrix S – The mass-produced data centre Rittal Catalogue 34 9 10 Rittal Catalogue 34 nextlevel Step three in the value chain Three powerful companies have joined forces to form an integrated trio of excellence, covering all aspects of enclosures. With Kiesling as international machine + + tool specialists, we can automate your success in equipping your enclosure. ◾ Kiesling Perforex – Machining of enclosure solutions ◾ Kiesling Secarex – Cable ducts and support rails cut to length without delay ◾ Kiesling Athex – Automated terminal block configuration ◾ Kiesling Averex – Mounting plate wiring Rittal Catalogue 34 11 Make 12 easy. Rittal Catalogue 34 nextlevel for data centres With RiMatrix S, Rittal unveils the first pre-planned, pre-configured concept with defined efficiency and power ratings for fully standardised data centre production. The revolutionary alternative to individual data centre construction: RiMatrix S ◾ Standardised, mass-produced data centre modules ◾ Only one model number ◾ Short delivery times – Delivered by HGV ◾ TÜV-tested Rittal Catalogue 34 13 14 Rittal Catalogue 34/Enclosures Enclosures Small enclosures Polycarbonate enclosures PK .......................................................................24 Cast aluminium enclosures GA .....................................................................28 Terminal boxes KL........................................................................................30 E-Box EB .....................................................................................................34 Bus enclosures BG.......................................................................................36 Compact enclosures Compact enclosures AE ...............................................................................46 Compact system enclosures CM ..................................................................50 Plastic enclosures KS ...................................................................................52 Enclosure systems Baying systems TS 8 ....................................................................................62 System enclosures SE 8 ...............................................................................81 IT enclosure systems/housings Network/server enclosures TS-IT..................................................................90 Distributor racks ...........................................................................................96 IT enclosures ................................................................................................97 Console systems/PC enclosure systems/IW TopConsole system TP...............................................................................110 One-piece consoles TP ..............................................................................115 Universal consoles TP.................................................................................116 PC enclosure systems ................................................................................118 Enclosure for tower PC...............................................................................119 Industrial Workstations................................................................................120 Operating housings/support arm systems/ stand systems Comfort Panel ............................................................................................124 Optipanel....................................................................................................126 Operating housings ....................................................................................130 Compact Panel...........................................................................................133 Support arm systems .................................................................................135 Stand systems............................................................................................164 Hygienic Design Terminal boxes HD .....................................................................................170 Compact enclosures HD.............................................................................171 Stainless steel Support arm system CP 40 ........................................................................140 Small enclosures ........................................................................................176 Compact enclosures...................................................................................179 Enclosure systems......................................................................................182 Operating housings ....................................................................................188 Ex enclosures Stainless steel Ex enclosures ......................................................................192 Plastic Ex enclosures ..................................................................................194 Rittal Catalogue 34/Enclosures 15 nextlevel for industry The Eplan engineering platform and the extensive system solutions from Rittal are perfectly interlinked. In this way, you can benefit from a unique system and effortlessly take value creation to the next level. Rittal – The System. ◾ Eplan – Efficient engineering ◾ Rittal – Type-tested enclosure systems ◾ Kiesling – Machining of enclosures and mounting plate wiring 16 Rittal Catalogue 34/Enclosures Rittal Catalogue 34/Enclosures 17 Enclosures from the smallest to the largest ◾ Small and compact enclosures ◾ Enclosure systems ◾ Console and PC enclosure systems ◾ Support arm systems and operating housings ◾ Stainless steel housing and enclosure systems 18 Rittal Catalogue 34/Enclosures ◾ Over 9 million already in use – the Top enclosure system TS 8 ◾ Rittal’s expertise is acquired from 15,000 enclosures and housings per day Rittal Catalogue 34/Enclosures 19 20 Rittal Catalogue 34/Enclosures Your benefits As a system provider, Rittal is the world's leading supplier of innovative enclosure technology. Rittal meets very high standards of security, ergonomics, energy and cost efficiency. Faster – Software tools for efficient engineering and a huge range of products available for immediate delivery Better – A comprehensive range of system accessories for individual installation and fast assembly Everywhere – A contiguous global delivery and service network Rittal Catalogue 34/Enclosures 21 22 Rittal Catalogue 34/Enclosures Small enclosures Polycarbonate enclosures PK Polycarbonate enclosures PK .......................................................................24 Accessories ..................................................................................................27 Cast aluminium enclosures GA Cast aluminium enclosures GA .....................................................................28 Accessories ..................................................................................................29 Terminal boxes KL Terminal boxes KL........................................................................................30 E-Box EB E-Box EB .....................................................................................................34 Bus enclosures BG Bus enclosures BG.......................................................................................36 Rittal Catalogue 34/Enclosures 23 Polycarbonate enclosures PK PK accessories Page 27 System accessories Page 507 Cable gland, polyamide Page 658 Material: – Housing: Fibre-glass reinforced polycarbonate – Cover grey: Fibreglass-reinforced polycarbonate, all-round foamed-in PU seal – Cover transparent: Polycarbonate, all-round foamed-in PU seal – Cover screws: Polyamide – Insulating bungs: Polyethylene Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 66 Supply includes: – Enclosure with cover – Cover screws – Insulating bungs for wall mounting screws Approvals: – UL – cUL Technical details: Available on the Internet without knockouts Width mm 65 94 94 94 110 110 Height mm 65 65 94 94 110 110 Depth mm 57 57 57 81 66 90 Model No. 9500.000 9502.000 9504.000 9505.000 9506.000 9507.000 12 pc(s). 8 pc(s). 6 pc(s). 6 pc(s). 6 pc(s). 6 pc(s). ◾ ◾ ◾ ◾ ◾ ◾ Packs of Cover Grey Page Accessories Mounting plate – – – – – – 9583.000 9583.000 9583.000 9583.000 9583.000 9583.000 – – – – – – Width mm 130 130 130 130 180 180 Height mm 94 94 130 130 94 94 Wall mounting brackets 1 pack(s) Hinges 27 without knockouts Depth mm 57 81 75 99 57 81 Model No. 9508.000 9509.000 9510.000 9511.000 9512.000 9513.000 4 pc(s). 4 pc(s). 4 pc(s). 4 pc(s). 2 pc(s). 2 pc(s). ◾ ◾ ◾ ◾ ◾ ◾ Packs of Cover Grey Page Accessories Mounting plate Wall mounting brackets Hinges 24 1 pack(s) – – – – – – 9583.000 9583.000 9583.000 9583.000 9583.000 9583.000 – – – – – – 27 Rittal Catalogue 34/Enclosures Polycarbonate enclosures PK without knockouts Width mm Packs of Height mm Depth mm Model No. Cover 2 pc(s). 180 180 180 180 180 180 110 110 110 110 110 110 90 90 111 111 165 165 9514.000 9514.100 9515.000 9515.100 9516.000 9516.100 Grey ◾ – ◾ – ◾ – Transparent – ◾ – ◾ – ◾ Page Accessories Mounting plate – – – – – – Wall mounting brackets 1 pack(s) 9583.000 9583.000 9583.000 9583.000 9583.000 9583.000 27 Hinges 10 set(s) 9581.000 9581.000 9581.000 9581.000 9581.000 9581.000 27 Packs of 182 182 182 182 182 182 Page 180 180 180 180 180 180 without knockouts Width mm Height mm Depth mm Model No. Cover 1 pc(s). 90 90 111 111 165 165 9517.000 9517.100 9518.000 9518.100 9519.000 9519.100 Grey ◾ – ◾ – ◾ – Transparent – ◾ – ◾ – ◾ Accessories Mounting plate 10 pc(s). 9548.000 9548.000 9548.000 9548.000 9548.000 9548.000 27 Wall mounting brackets 1 pack(s) 9583.000 9583.000 9583.000 9583.000 9583.000 9583.000 27 Hinges 10 set(s) 9581.000 9581.000 9581.000 9581.000 9581.000 9581.000 27 Packs of 254 254 254 254 254 254 Page 180 180 180 180 180 180 without knockouts Width mm Height mm Depth mm Model No. Cover 1 pc(s). 90 90 111 111 165 165 9520.000 9520.100 9521.000 9521.100 9522.000 9522.100 Grey ◾ – ◾ – ◾ – Transparent – ◾ – ◾ – ◾ Accessories Mounting plate 8 pc(s). 9549.000 9549.000 9549.000 9549.000 9549.000 9549.000 27 Wall mounting brackets 1 pack(s) 9583.000 9583.000 9583.000 9583.000 9583.000 9583.000 27 Hinges 10 set(s) 9581.000 9581.000 9581.000 9581.000 9581.000 9581.000 27 without knockouts Width mm Packs of Height mm Depth mm Model No. Cover 1 pc(s). 360 360 360 360 254 254 254 254 111 111 165 165 9523.000 9523.100 9524.000 9524.100 Grey ◾ – ◾ – Transparent – ◾ – ◾ Page Accessories Mounting plate 4 pc(s). 9550.000 9550.000 9550.000 9550.000 Wall mounting brackets 1 pack(s) 9583.000 9583.000 9583.000 9583.000 27 Hinges 10 set(s) 9581.000 9581.000 9581.000 9581.000 27 Rittal Catalogue 34/Enclosures 27 25 Polycarbonate enclosures PK PK accessories Page 27 System accessories Page 507 Cable gland, polyamide Page 658 Material: – Housing: Fibre-glass reinforced polycarbonate – Cover: Fibreglass-reinforced polycarbonate, all-round foamed-in PU seal – Cover screws: Polyamide – Insulating bungs: Polyethylene Colour: – RAL 7035 Supply includes: – Enclosure with cover – Cover screws – Insulating bungs for wall mounting screws Protection category IP to IEC 60 529: – IP 66 Approvals: – UL – cUL Technical details: Available on the Internet with knockouts Width mm 130 180 254 Height mm 94 110 180 Depth mm 57 90 111 Model No. 9508.050 9514.050 9521.050 4 pc(s). 2 pc(s). 1 pc(s). ◾ ◾ ◾ 10 x M16/M20 16 x M20 2 x M20/M25 2 x M32/M40 24 x M20 4 x M25/M32 4 x M32/M40 Packs of Cover Grey No. of metric knockouts Page Accessories Mounting plate Wall mounting brackets 26 8 pc(s). – – 9549.000 27 1 pack(s) 9583.000 9583.000 9583.000 27 Rittal Catalogue 34/Enclosures Polycarbonate enclosures PK Accessories Mounting plate Colour: – RAL 7035 For individual interior installation Supply includes: – Mounting plate – Self-tapping assembly screws Material: – 2.5 mm melamine phenol-coated laminated paper Width mm Height mm Packs of Model No. 9517.000/.100, 9518.000/.100, 9519.000/.100 150 150 10 pc(s). 9548.000 9520.000/.100, 9521.000/.100, 9521.050, 9522.000/.100 220 150 8 pc(s). 9549.000 9523.000/.100, 9524.000/.100 331 220 4 pc(s). 9550.000 For enclosure Hinges For hinged attachment of covers. The supplied drilling template ensures problem-free assembly. Colour: – Similar to RAL 7035 Supply includes: – 1 set = 2 hinges 4 assembly screws 4 polyethylene sealing bungs 1 drilling template For enclosure Material Packs of Model No. 9514.000/.100 – 9524.000/.100 Polystyrene 10 set(s) 9581.000 Wall mounting brackets The enclosure can be screwed to the wall using four wall mounting brackets. The wall mounting bracket is securely attached to the enclosure by simply using pins. For all enclosures Packs of Model No. 1 pack(s) 9583.000 Supply includes: – 1 pack = 40 pieces Material: – Polyamide, grey Colour: – Similar to RAL 7035 Rittal Catalogue 34/Enclosures 27 Cast aluminium enclosures GA GA accessories Page 29 System accessories Page 507 Material: – Enclosure: Cast aluminium – Cover: Cast aluminium, allround foamed-in PU seal Surface finish: – Textured paint Supply includes: – Enclosure with cover – Cover screws, captive – Screws for attaching support rails – Screw for connection of the PE conductor Colour: – RAL 7001 Protection category IP to IEC 60 529: – IP 66 Protection category NEMA: – NEMA 4 Technical details: Available on the Internet Width mm 58 98 75 125 175 250 122 220 Height mm 64 64 80 80 80 80 120 120 34 35 57 57 57 57 80 91 Depth mm Model No. Page 9101.210 9102.210 9104.210 9105.210 9106.210 9107.210 9108.210 9110.210 Packs of 5 pc(s). 3 pc(s). 1 pc(s). 1 pc(s). 1 pc(s). 1 pc(s). – – 1 pc(s). 1 pc(s). Accessories – – – 9105.700 Mounting plate Packs of – – – 10 pc(s). – – Wall mounting bracket 2 pc(s). – – – – – – 9121.122 9121.122 29 Hinge, exterior 2 pc(s). – – – – – – 9123.000 9123.000 29 Earth straps see page see page see page see page see page see page see page see page 644 Cable glands from page from page from page from page from page from page from page from page 658 Width mm Packs of Height mm Depth mm Model No. 9108.700 9110.700 2 pc(s). 29 2 pc(s). 360 160 260 360 202 280 334 330 120 160 160 160 232 232 233 230 82 91 91 91 111 111 111 181 Page 1 pc(s). 9111.210 9112.210 9113.210 9114.210 9116.210 9117.210 9118.210 9119.210 Accessories – 9112.700 9113.700 9114.700 9116.700 9117.700 9118.700 9118.700 29 Mounting plate Packs of Wall mounting bracket 2 pc(s). 9121.122 9121.160 9121.160 9121.160 9121.230 9121.230 9121.230 9121.230 29 Hinge, exterior 2 pc(s). 9123.000 9123.000 9123.000 9123.000 9123.000 9123.000 9123.000 9123.000 29 – 2 pc(s). see page 1 pc(s). see page 1 pc(s). see page 1 pc(s). see page 1 pc(s). see page 1 pc(s). Earth straps see page see page 644 Cable glands from page from page from page from page from page from page from page from page 658 28 see page 2 pc(s). Rittal Catalogue 34/Enclosures Cast aluminium enclosures GA Accessories Mounting plate For individual interior installation, with mounting holes. Exterior dimensions mm Width Height Material: – Sheet steel Surface finish: – Zinc-plated For GA enclosures Packs of Model No. 114 69 9105.210 10 pc(s). 9105.700 109 107 9108.210 2 pc(s). 9108.700 207 107 9110.210 2 pc(s). 9110.700 144 142 9112.210 2 pc(s). 9112.700 245 142 9113.210 2 pc(s). 9113.700 346 142 9114.210 1 pc(s). 9114.700 183 214 9116.210 1 pc(s). 9116.700 264 214 9117.210 1 pc(s). 9117.700 314 214 9118.210/9119.210 1 pc(s). 9118.700 Wall mounting bracket For GA enclosures Packs of Model No. For external mounting on surfaces – no need to dismantle the cover if pre-assembled. 9108.210/ 9110.210/ 9111.210 2 pc(s). 9121.122 Material: – Sheet steel 9112.210/ 9113.210/ 9114.210 2 pc(s). 9121.160 9116.210/ 9117.210/ 9118.210/ 9119.210 2 pc(s). 9121.230 For GA enclosures Packs of Model No. 9108.210/ 9110.210/ 9111.210/ 9112.210/ 9113.210/ 9114.210/ 9116.210/ 9117.210/ 9118.210/ 9119.210 2 pc(s). + 8 screws 9123.000 Surface finish: – Zinc-plated Hinge, exterior For fastening the cover to the enclosure base. Material: – Die-cast aluminium Colour: – RAL 7001 Rittal Catalogue 34/Enclosures 29 Terminal boxes KL System accessories Page 507 KL stainless steel Page 177 KL for potentially explosive areas Page 192 KL Hygienic Design Page 170 Material: – Enclosure: Sheet steel – Cover: Sheet steel, all-round foamed-in PU seal Surface finish: – Enclosure and cover: Dipcoatprimed, powder-coated on the outside, textured paint Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 66 Protection category NEMA: – NEMA 4 Supply includes: – Enclosure with cover – Quick-release fastener including plastic bushes Approvals: – UL – CSA – TÜV – Germanischer Lloyd – Russian Maritime Register of Shipping – Lloyds Register of Shipping – Bureau Veritas – VDE Technical details: Available on the Internet without gland plate Width mm Packs of Height mm Depth mm Material thickness - enclosure mm Material thickness - cover mm Model No. 1 pc(s). Weight kg 150 200 200 300 300 400 150 150 200 150 200 200 80 80 80 80 80 80 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1514.510 1528.510 1516.510 1515.510 1517.510 1518.510 1.4 1.6 1.9 2.1 2.6 3.2 Page Accessories Mounting plates 1 pc(s). 1560.700 1575.700 1562.700 1561.700 1563.700 1564.700 591 Support rails TS 35/7.5 10 pc(s). 2314.000 2315.000 2315.000 2316.000 2316.000 2317.000 614 – – – – – – Cover retainer 3 pair(s) 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 574 Cover hinge 6 pc(s). 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 574 Earthing kit 5 pc(s). 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 646 Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 587 Spare quick-release fastener 12 pc(s). 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000 Support rails TS 35/15 30 Rittal Catalogue 34/Enclosures Terminal boxes KL without gland plate Width mm Packs of Height mm Depth mm Material thickness - enclosure mm Material thickness - cover mm Model No. 1 pc(s). Weight kg 600 150 200 200 300 300 200 150 150 200 150 200 80 120 120 120 120 120 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1519.510 1500.510 1529.510 1502.510 1501.510 1503.510 4.6 1.6 1.8 2.3 2.6 3.0 Page Accessories Mounting plates 1 pc(s). 1566.700 1560.700 1575.700 1562.700 1561.700 1563.700 591 Support rails TS 35/7.5 10 pc(s). – 2314.000 2315.000 2315.000 2316.000 2316.000 614 Support rails TS 35/15 10 pc(s). 2319.000 – – – – – 614 Cover retainer 3 pair(s) 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 574 Cover hinge 6 pc(s). 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 574 Earthing kit 5 pc(s). 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 646 Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 587 Spare quick-release fastener 12 pc(s). 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000 Packs of 300 400 400 400 400 500 300 150 200 300 400 200 without gland plate Width mm Height mm Depth mm 120 120 120 120 120 120 Material thickness - enclosure mm 1.38 1.25 1.25 1.38 1.38 1.25 Material thickness - cover mm Model No. 1 pc(s). Weight kg 1.25 1.25 1.25 1.25 1.25 1.25 1507.510 1589.510 1504.510 1508.510 1511.510 1505.510 4.0 3.2 3.6 4.8 6.2 4.4 Page Accessories Mounting plates 1 pc(s). 1567.700 1576.700 1564.700 1568.700 1571.700 1565.700 591 Support rails TS 35/7.5 10 pc(s). 2316.000 2317.000 2317.000 2317.000 2317.000 – 614 Support rails TS 35/15 10 pc(s). – – – – – 2318.000 614 Cover retainer 3 pair(s) 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 574 Cover hinge 6 pc(s). 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 574 Earthing kit 5 pc(s). 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 646 Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 587 Spare quick-release fastener 12 pc(s). 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000 Packs of 500 600 600 600 800 800 300 200 300 400 200 400 without gland plate Width mm Height mm Depth mm 120 120 120 120 120 120 Material thickness - enclosure mm 1.38 1.25 1.38 1.38 1.25 1.38 Material thickness - cover mm Model No. 1 pc(s). Weight kg 1.25 1.25 1.25 1.25 1.25 1.25 1509.510 1506.510 1510.510 1512.510 1527.510 1513.510 5.8 5.7 6.8 8.4 6.8 11.0 1569.700 1566.700 1570.700 1572.700 1574.700 1573.700 – – – – – – Page Accessories Mounting plates 1 pc(s). Support rails TS 35/7.5 591 Support rails TS 35/15 10 pc(s). 2318.000 2319.000 2319.000 2319.000 – – 614 Cover retainer 3 pair(s) 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 574 Cover hinge 6 pc(s). 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 574 Earthing kit 5 pc(s). 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 646 Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 587 Spare quick-release fastener 12 pc(s). 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000 Rittal Catalogue 34/Enclosures 31 Terminal boxes KL System accessories Page 507 KL stainless steel Page 177 KL for potentially explosive areas Page 192 KL Hygienic Design Page 170 Material: – Enclosure: Sheet steel – Cover: Sheet steel, all-round foamed-in PU seal Surface finish: – Enclosure and cover: Dipcoatprimed, powder-coated on the outside, textured paint Supply includes: – Enclosure with cover – Quick-release fastener including plastic bushes – Sheet steel gland plates with seals and assembly parts Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 55 Approvals: – UL – CSA – TÜV – Germanischer Lloyd – Russian Maritime Register of Shipping – Lloyds Register of Shipping – Bureau Veritas – VDE Protection category NEMA: – NEMA 12 Technical details: Available on the Internet with gland plate Width mm Packs of Height mm 300 300 300 400 400 400 500 150 200 300 200 300 400 200 Depth mm 120 120 120 120 120 120 120 Material thickness - enclosure mm 1.25 1.25 1.38 1.25 1.38 1.38 1.25 Material thickness - cover mm Model No. 1 pc(s). Weight kg 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1530.510 1531.510 1535.510 1532.510 1536.510 1539.510 1533.510 4.9 Page 2.7 3.3 4.5 4.0 5.2 6.7 Gland plate (top + bottom), size 2 2 2 2 2 2 2 Gland plate (top + bottom), qty. 1+1 1+1 1+1 1+1 1+1 1+1 2+2 Gland plate (left + right), size – – 2 – 2 2 – Gland plate (left + right), qty. – – 1+1 – 1+1 1+1 – 1561.700 1563.700 1567.700 1564.700 1568.700 1571.700 1565.700 591 see page see page see page see page see page see page see page 653 Accessories Mounting plates 1 pc(s). Plastic cable gland plates Support rails TS 35/7.5 10 pc(s). 2316.000 2316.000 2316.000 2317.000 2317.000 2317.000 – 614 Support rails TS 35/15 10 pc(s). – – – – – – 2318.000 614 Cover retainer 3 pair(s) 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 574 Cover hinge 6 pc(s). 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 574 Earthing kit 5 pc(s). 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 646 Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 587 Spare quick-release fastener 12 pc(s). 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000 32 Rittal Catalogue 34/Enclosures Terminal boxes KL with gland plate Width mm Packs of Height mm 500 600 600 600 800 800 300 200 300 400 200 400 Depth mm 120 120 120 120 120 120 Material thickness - enclosure mm 1.38 1.25 1.38 1.38 1.25 1.38 Material thickness - cover mm Model No. 1 pc(s). Weight kg 1.25 1.25 1.25 1.25 1.25 1.25 1537.510 1534.510 1538.510 1540.510 1542.510 1541.510 12.0 Page 5.2 5.9 7.7 9.0 7.2 Gland plate (top + bottom), size 2 2 2 2 2 2 Gland plate (top + bottom), qty. 2+2 2+2 2+2 2+2 3+3 3+3 Gland plate (left + right), size 2 – 2 2 – 2 Gland plate (left + right), qty. 1+1 – 1+1 1+1 – 1+1 1569.700 1566.700 1570.700 1572.700 1574.700 1573.700 591 see page see page see page see page see page see page 653 – Accessories Mounting plates 1 pc(s). Plastic cable gland plates – – – – – Support rails TS 35/15 10 pc(s). 2318.000 2319.000 2319.000 2319.000 – – 614 Cover retainer 3 pair(s) 1591.000 1591.000 1591.000 1591.000 1591.000 1591.000 574 Cover hinge 6 pc(s). 1592.000 1592.000 1592.000 1592.000 1592.000 1592.000 574 Earthing kit 5 pc(s). 2570.100 2570.100 2570.100 2570.100 2570.100 2570.100 646 Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 587 Spare quick-release fastener 12 pc(s). 1593.000 1593.000 1593.000 1593.000 1593.000 1593.000 Accessories Support rails TS 35/7.5 Rittal Catalogue 34/Enclosures Earthing set see from page 644 33 E-Box EB System accessories Page 507 Colour: – RAL 7035 Protection category NEMA: – NEMA 4 Supply includes: – Enclosure with hinged door – 180° hinge – Cam lock with 3 mm double-bit insert – Mounting plate Approvals: – UL – CSA – TÜV – Germanischer Lloyd – Russian Maritime Register of Shipping – Lloyds Register of Shipping – Bureau Veritas – VDE F T G Surface finish: – Enclosure and door: Dipcoatprimed, powder-coated on the outside, textured paint – Mounting plate: Zinc-plated Protection category IP to IEC 60 529: – IP 66 H Material: – Enclosure and door: Sheet steel, all-round foamed-in PU seal Technical details: Available on the Internet B Depth 80 mm Width (B) mm Packs of Height (H) mm 150 150 200 200 200 150 300 200 300 400 Depth (T) mm 80 80 80 80 80 Mounting plate width (F) mm 125 125 175 175 175 Mounting plate height (G) mm 135 285 185 285 385 Material thickness - enclosure mm 1.25 1.25 1.25 1.25 1.25 Material thickness - door mm Model No. 1 pc(s). Weight kg 1.25 1.25 1.25 1.25 1.25 1551.500 1545.500 1546.500 1552.500 1547.500 1.7 2.6 2.4 3.2 4.4 Page Accessories Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 1590.000 1590.000 587 Pole clamp 1 set(s) 2584.000 2584.000 2584.000 2584.000 2584.000 589 30 pc(s). 2309.000 2309.000 2309.000 2309.000 2309.000 614 Support rails see page see page see page see page see page 613 Cable glands from page from page from page from page from page 658 Earth straps see page see page see page see page see page 644 2476.000 2476.000 2476.000 2476.000 2476.000 571 from page from page from page from page from page 564 Mounting clip Lock cover Lock systems 34 2 pc(s). Rittal Catalogue 34/Enclosures E-Box EB Depth 120 mm Width (B) mm 150 150 200 200 200 200 300 300 Height (H) mm Packs of 150 300 200 300 400 500 300 400 Depth (T) mm 120 120 120 120 120 120 120 120 Mounting plate width (F) mm 125 125 175 175 175 175 275 275 Mounting plate height (G) mm 135 285 185 285 385 485 285 385 Material thickness - enclosure mm 1.25 1.25 1.25 1.25 1.25 1.25 1.38 1.38 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 Material thickness - door mm Model No. 1 pc(s). Weight kg Page 1553.500 1548.500 1549.500 1554.500 1550.500 1557.500 1555.500 1556.500 2.0 3.0 2.8 3.6 5.0 6.2 5.0 6.4 Accessories Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 1590.000 587 Pole clamp 1 set(s) 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 589 30 pc(s). Mounting clip 2309.000 2309.000 2309.000 2309.000 2309.000 2309.000 2309.000 2309.000 614 Support rails see page see page 613 Cable glands from page from page from page from page from page from page from page from page 658 Earth straps see page 644 Lock cover 2 pc(s). Lock systems see page see page see page see page see page see page see page see page see page see page see page see page see page 2476.000 2476.000 2476.000 2476.000 2476.000 2476.000 2476.000 2476.000 571 from page from page from page from page from page from page from page from page 564 Depth 155 mm Width (B) mm 300 300 300 Height (H) mm Packs of 400 600 800 Depth (T) mm 155 155 155 Mounting plate width (F) mm 275 275 275 Mounting plate height (G) mm 385 585 785 Material thickness - enclosure mm 1.38 1.38 1.38 Material thickness - door mm Model No. 1 pc(s). Weight kg 1.25 1.25 1.25 1577.500 1578.500 1579.500 7.1 11.0 13.2 Page Accessories Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 587 Pole clamp 1 set(s) 2584.000 2584.000 2584.000 589 30 pc(s). Mounting clip 2309.000 2309.000 2309.000 614 Support rails see page see page see page 613 Cable glands from page from page from page 658 Earth straps see page see page see page 644 Lock cover Accessories Lock systems Rittal Catalogue 34/Enclosures 2 pc(s). 2476.000 2476.000 2476.000 571 from page from page from page 564 Wall mounting bracket see from page 587 35 Bus enclosures BG System accessories Page 507 BG stainless steel Page 178 Material: – Enclosure: Sheet steel – Door: Sheet steel with polycarbonate viewing window, 4 mm Surface finish: – Enclosure and door: Dipcoatprimed, powder-coated, textured paint Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 65 NEMA protection category: – NEMA 12 Approvals: – TÜV – Lloyds Register of Shipping – VDE – UL – cUL Technical details: Available on the Internet Supply includes: – Enclosure with door – Viewing window in the door Please note the product-specific scope of supply. Width mm Packs of Height mm Depth mm 300 400 500 300 300 300 300 80 80 80 80 1583.520 1584.520 1585.520 1586.520 Enclosure 1.25 1.25 1.25 1.25 Door 1.25 1.25 1.25 1.25 Left Model No. Material thickness mm 200 1 pc(s). Page Product-specific scope of supply Door hinge Left Left Left Cam lock with double-bit insert 1 1 1 1 Support rail TS 35/7.5 2 2 2 2 Number of metric holes M12 2 2 2 3 M20 5 9 13 24 M25 2 2 3 – Accessories 36 Lock cover 1 pc(s). 2476.000 2476.000 2476.000 2476.000 572 Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 1590.000 587 Pole clamp 1 pc(s). 2584.000 2584.000 2584.000 2584.000 589 Lock inserts, type A see page 570 Lock cylinder inserts, type B see page 571 Plastic handles, type B see page 569 Rittal Catalogue 34/Enclosures Bus enclosures BG Width mm Packs of Height mm Depth mm 400 300 300 120 120 1605.520 1606.520 Enclosure 1.25 1.38 Door 1.25 1.25 Right Right Model No. Material thickness mm 200 1 pc(s). Page Product-specific scope of supply Door hinge Cam lock with double-bit insert 1 1 Support rail TS 35/7.5 1 1 Number of metric holes M12 2 – M20 – 2 M32 5 9 M50 – 1 Accessories Lock cover 1 pc(s). 2476.000 2476.000 Wall mounting bracket 4 pc(s). 1590.000 1590.000 587 Pole clamp 1 pc(s). 2584.000 2584.000 589 400 600 Page 200 200 Lock inserts, type A see page 570 Lock cylinder inserts, type B see page 571 Plastic handles, type B see page 569 Width mm Packs of Height mm Depth mm 125 125 1558.510 1559.510 Enclosure 1.25 1.25 Door 1.25 1.25 Model No. Material thickness mm 1 pc(s). 572 Product-specific scope of supply Door hinge Bottom Bottom Quick-release fastener 2 3 Support rail TS 35/7.5 1 1 Gland plate in the base 1 1 Accessories Wall mounting bracket 4 pc(s). 1590.000 1590.000 587 Pole clamp 1 pc(s). 2584.000 2584.000 589 Width mm Packs of 400 500 Page 500 300 Height mm Depth mm 160 120 1611.510 1609.510 Enclosure 1.38 1.38 Door 1.5 1.25 Right Bottom Model No. Material thickness mm 1 pc(s). Product-specific scope of supply Door hinge Cam lock with double-bit insert 1 – Quick-release fastener – 2 Support rail TS 35/7.5 3 1 Number of drilled holes for PG 13.5 or M20 33 48 Accessories Lock cover 1 pc(s). 2476.000 – Wall mounting bracket 4 pc(s). 1590.000 1590.000 587 Pole clamp 1 pc(s). 2584.000 2584.000 589 Lock inserts, type A see page 570 Lock cylinder inserts, type B see page 571 Plastic handles, type B see page 569 Rittal Catalogue 34/Enclosures 572 37 Bus enclosures BG Width mm 400 400 400 Height mm Packs of 300 300 300 Depth mm 155 155 155 Mounting plate width 385 385 385 Mounting plate height 275 275 275 1577.500 1577.530 1577.450 Enclosure 1.38 1.38 1.38 Door 1.25 1.25 1.25 Bottom Bottom Bottom 1 1 1 – 340 x 190 340 x 155 Model No. Material thickness mm 1 pc(s). Page Product-specific scope of supply Door hinge Cam lock with double-bit insert Viewing window Size mm Position1) mm – 42 92 Mounting plate 1 1 1 Gland plate in the base – – – Accessories Lock cover 1 pc(s). 2476.000 2476.000 2476.000 572 Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 587 Pole clamp 1 pc(s). 2584.000 2584.000 2584.000 589 Page Lock inserts, type A see page 570 Lock cylinder inserts, type B see page 571 Plastic handles, type B see page 569 1) Bottom edge of window to bottom edge of door Width mm 600 600 600 Height mm Packs of 300 300 300 Depth mm 155 155 155 Mounting plate width 585 585 585 Mounting plate height 275 275 275 1578.500 1578.530 1578.450 Enclosure 1.38 1.38 1.38 Door 1.25 1.25 1.25 Bottom Bottom Bottom 2 2 2 – 540 x 190 540 x 155 Model No. Material thickness mm 1 pc(s). Product-specific scope of supply Door hinge Cam lock with double-bit insert Viewing window Size mm Position1) mm – 42 92 Mounting plate 1 1 1 Gland plate in the base – – – Accessories Lock cover 1 pc(s). 2476.000 2476.000 2476.000 572 Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 587 Pole clamp 1 pc(s). 2584.000 2584.000 2584.000 589 Lock inserts, type A see page 570 Lock cylinder inserts, type B see page 571 Plastic handles, type B see page 569 1) 38 Bottom edge of window to bottom edge of door Rittal Catalogue 34/Enclosures Bus enclosures BG Width mm 800 800 800 Height mm Packs of 300 300 300 Depth mm 155 155 155 Mounting plate width 785 785 785 Mounting plate height 275 275 275 1579.500 1579.530 1579.450 Enclosure 1.38 1.38 1.38 Door 1.25 1.25 1.25 Bottom Bottom Bottom 2 2 2 – 740 x 190 740 x 155 Model No. Material thickness mm 1 pc(s). Page Product-specific scope of supply Door hinge Cam lock with double-bit insert Viewing window Size mm Position1) mm – 42 92 Mounting plate 1 1 1 Gland plate in the base – – – Accessories Lock cover 1 pc(s). 2476.000 2476.000 2476.000 572 Wall mounting bracket 4 pc(s). 1590.000 1590.000 1590.000 587 Pole clamp 1 pc(s). 2584.000 2584.000 2584.000 589 Lock inserts, type A see page 570 Lock cylinder inserts, type B see page 571 Plastic handles, type B see page 569 Accessories 1)Bottom Rittal Catalogue 34/Enclosures edge of window to bottom edge of door Metal gland plates see page 655 39 40 Rittal Catalogue 34/Enclosures Compact enclosures Compact enclosures AE Compact enclosures AE ...............................................................................46 Compact system enclosures CM Width 600 – 800 mm....................................................................................50 Width 1000 – 1200 mm ................................................................................51 Plastic enclosures KS Plastic enclosures KS ...................................................................................52 Rittal Catalogue 34/Enclosures 41 Compact enclosures AE 42 Rittal Catalogue 34/Enclosures New interior installation rail ◾ Retrospective interior installation without machining ◾ Allows time-saving mounting on the sides, base and roof areas ◾ Variable with two rows of TS 8 system punchings, creates additional mounting space ◾ TS 8 system punchings allow TS 8 accessories to be used ◾ Automatic potential equalisation ◾ May still be fitted after installation of the mounting plates ◾ Mounting option for door-operated switch and door stay Conductive mounting plate ◾ Simple one-person assembly even with free-standing enclosures, via a slot in the mounting plate ◾ Zinc-plated surface finish for direct contact between assemblies and optimum EMC properties Interchangeable gland plate ◾ Sheet steel for simple machining, supplied loose ◾ Integrated, automatic potential equalisation by mounting screws ◾ Other gland plates with metal or plastic knock-outs for simple, fast cable entry are available as accessories Rittal Catalogue 34/Enclosures 43 Compact enclosures AE 44 Rittal Catalogue 34/Enclosures Optimum surface protection 1 Triple surface treatment provides optimum protection against corrosion. Maximum quality is achieved in three stages: 1st phase: Nanoceramic primer 2nd phase: Electrophoretic dipcoat-priming 3rd phase: Textured powder-coating Metal with triple surface treatment (Rittal standard) following a 180-hour salt spray mist test Metal powder-coated only following a 180-hour salt spray mist test 2 Integral perforated door strips ◾ For universal door installations ◾ For secure cable routing from the door to the enclosure Interchangeable door hinge ◾ The door hinge is easily swapped over in single-door enclosures ◾ No machining required, since the holes are pre-integrated and sealed with stoppers Practical wall mounting bracket ◾ For fast, time-saving attachment to the enclosure from the outside ◾ Simply insert the expandable dowel into the enclosure hole from the outside, and screw-fasten the wall bracket from the outside. In this way, the pre-configured enclosure may be transported to the installation site and the wall bracket secured without opening the enclosure. Rittal Catalogue 34/Enclosures 45 Compact enclosures AE System accessories Page 507 AE stainless steel Page 179 Hygienic Design Page 171 Supply includes: – Enclosure with hinged door(s), of all-round solid construction – Gland plate(s) in enclosure base – Mounting plate Please note the product-specific scope of supply. Approvals: – UL – CSA – TÜV – Germanischer Lloyd – Russian Maritime Register of Shipping – Lloyds Register of Shipping – Bureau Veritas – VDE F T B G Surface finish: – Enclosure and door: Dipcoatprimed, powder-coated on the outside, textured paint – Mounting plate: Zinc-plated Colour: – RAL 7035 H Material: – Enclosure: Sheet steel – Door: Sheet steel, all-round foamed-in PU seal Technical details: Available on the Internet Width (B) mm Packs of 200 200 300 300 300 380 Height (H) mm 300 300 300 300 400 300 Depth (T) mm 120 155 155 210 210 155 Mounting plate width (F) mm 162 162 254 254 254 334 Mounting plate height (G) mm 275 275 275 275 375 275 Material thickness - enclosure mm 1.25 1.25 1.38 1.38 1.38 1.38 Material thickness - door mm 1.5 1.5 1.5 1.5 1.5 1.5 Mounting plate thickness mm 2.0 2.0 2.5 2.0 2.0 2.0 1032.500 1035.500 1036.500 1033.500 1034.500 1030.500 Model No. 1 pc(s). Weight kg 4.0 4.5 6.1 7.0 8.8 7.4 IP 55 IP 55 IP 66 IP 66 IP 66 IP 66 NEMA 12 NEMA 12 NEMA 4 NEMA 4 NEMA 4 NEMA 4 Door(s) 1 1 1 1 1 1 Door hinged on the right, may be swapped to the left – – ◾ ◾ ◾ ◾ Gland plate, size 1 1 – 1 – 3 Gland plates, qty. 1 1 1 1 1 1 Cam lock 1 1 1 1 1 1 Protection category IP to IEC 60 529 Protection category NEMA Page Product-specific scope of supply Accessories Gland plates from page from page from page from page from page from page Rails for interior installation 4 pc(s). – – – 2383.210 2383.210 – 605 Wall mounting bracket 4 pc(s). 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 587 Baying kit 1 set(s) 1199.100 1199.100 1199.100 1199.100 1199.100 1199.100 548 Door stay 5 pc(s). – – 2519.000 2519.000 2519.000 2519.000 578 180° hinges 2 pc(s). 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 574 see page see page see page see page see page see page 644 Earth straps LED system light 1 pc(s). Plastic wiring plan pocket Dust guard trim Lock systems 46 1 pc(s). 653 4140.810 4140.810 4140.810 4140.810 see page see page 637 from page from page from page from page from page from page 577 2426.500 2426.500 2426.500 2426.500 2426.500 2426.500 581 from page from page from page from page from page from page 560 Rittal Catalogue 34/Enclosures Compact enclosures AE Width (B) mm Packs of 380 380 380 380 400 400 Height (H) mm 300 380 600 600 500 800 Depth (T) mm 210 210 210 350 210 300 Mounting plate width (F) mm 334 334 334 334 354 349 Mounting plate height (G) mm 275 355 570 570 475 770 Material thickness - enclosure mm 1.38 1.38 1.38 1.5 1.38 1.5 Material thickness - door mm 1.5 1.5 1.5 1.5 1.5 2.0 Mounting plate thickness mm 2.0 2.0 2.5 2.5 2.0 3.0 1031.500 1380.500 1038.500 1338.500 1045.500 1037.500 Model No. 1 pc(s). Weight kg 7.5 9.8 15.6 19.4 13.0 26.2 IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 NEMA 4 NEMA 4 NEMA 4 NEMA 4 NEMA 4 NEMA 4 Door(s) 1 1 1 1 1 1 Door hinged on the right, may be swapped to the left ◾ ◾ ◾ ◾ ◾ ◾ Gland plate, size 3 3 3 4 4 4 Gland plates, qty. 1 1 1 1 1 1 Cam lock 1 1 2 2 2 2 Protection category IP to IEC 60 529 Protection category NEMA Page Product-specific scope of supply Accessories Gland plates from page from page from page from page from page from page 653 Rails for interior installation 4 pc(s). 2383.210 2383.210 2383.210 2383.350 2383.210 2383.300 605 Wall mounting bracket 4 pc(s). 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 587 Baying kit 1 set(s) 1199.100 1199.100 1199.100 1199.100 1199.100 1199.100 548 578 Door stay 5 pc(s). 2519.000 2519.000 2519.000 2519.000 2519.000 2519.000 180° hinges 2 pc(s). 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 574 see page see page see page see page see page see page 644 637 Earth straps LED system light see page see page see page see page see page see page Plastic wiring plan pocket from page from page from page from page from page from page 577 2426.500 2426.500 2426.500 2426.500 2426.500 2426.500 581 from page from page from page from page from page from page 564 500 500 500 600 600 600 Page Height (H) mm 500 500 700 380 380 600 Depth (T) mm 210 300 250 210 350 210 Mounting plate width (F) mm 449 449 449 549 549 549 Mounting plate height (G) mm 470 470 670 355 355 570 Material thickness - enclosure mm 1.38 1.5 1.5 1.38 1.5 1.38 Material thickness - door mm 1.75 1.75 2.0 1.5 1.5 1.75 Mounting plate thickness mm 2.5 2.5 2.5 2.5 2.5 2.5 1050.500 1350.500 1057.500 1039.500 1339.500 1060.500 Dust guard trim 1 pc(s). Lock systems Width (B) mm Model No. Packs of 1 pc(s). Weight kg 16.8 19.6 31.2 15.4 20.0 22.8 Protection category IP to IEC 60 529 IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 NEMA 4 NEMA 4 NEMA 4 NEMA 4 NEMA 4 NEMA 4 Door(s) 1 1 1 1 1 1 Door hinged on the right, may be swapped to the left ◾ ◾ ◾ ◾ ◾ ◾ Gland plate, size 4 4 4 5 5 5 Gland plates, qty. 1 1 1 1 1 1 Cam lock 2 2 2 1 1 2 Protection category NEMA Product-specific scope of supply Accessories Gland plates from page from page from page from page from page from page 653 Rails for interior installation 4 pc(s). 2383.210 2383.300 2383.250 2383.210 2383.350 2383.210 605 Wall mounting bracket 4 pc(s). 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 587 Baying kit 1 set(s) 1199.100 1199.100 1199.100 1199.100 1199.100 1199.100 548 Door stay 5 pc(s). 2519.000 2519.000 2519.000 2519.000 2519.000 2519.000 578 180° hinges 2 pc(s). 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 574 20 pc(s). 2325.000 2325.000 2325.000 2326.000 2326.000 2326.000 575 Earth straps see page see page see page see page see page see page 644 LED system light see page see page see page see page see page see page 637 Plastic wiring plan pocket from page from page from page from page from page from page 577 2426.500 2426.500 2426.500 2426.500 2426.500 2426.500 581 from page from page from page from page from page from page 560 Support strips Dust guard trim Lock systems Rittal Catalogue 34/Enclosures 1 pc(s). 47 Compact enclosures AE Width (B) mm Packs of 600 600 600 600 600 600 Height (H) mm 600 600 760 760 800 1000 Depth (T) mm 250 350 210 350 250 250 Mounting plate width (F) mm 549 549 549 549 549 539 Mounting plate height (G) mm 570 570 730 730 770 955 Material thickness - enclosure mm 1.5 1.5 1.38 1.5 1.5 1.5 Material thickness - door mm 1.75 1.75 2.0 2.0 2.0 2.0 Mounting plate thickness mm 2.5 2.5 3.0 3.0 3.0 3.0 1054.500 1360.500 1076.500 1376.500 1058.500 1090.500 Model No. 1 pc(s). Weight kg 24.8 28.4 32.1 36.0 33.6 50.5 Protection category IP to IEC 60 529 IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 NEMA 4 NEMA 4 NEMA 4 NEMA 4 NEMA 4 NEMA 4 Door(s) 1 1 1 1 1 1 Door hinged on the right, may be swapped to the left ◾ ◾ ◾ ◾ ◾ ◾ Gland plate, size 5 5 5 5 5 5 Gland plates, qty. 1 1 1 1 1 1 Cam lock 2 2 2 2 2 2 Protection category NEMA Page Product-specific scope of supply Accessories Gland plates from page from page from page from page from page from page 653 Rails for interior installation 4 pc(s). 2383.250 2383.350 2383.210 2383.350 2383.250 2383.250 605 Wall mounting bracket 4 pc(s). 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 587 Baying kit 1 set(s) 1199.100 1199.100 1199.100 1199.100 1199.100 – 548 Door stay 5 pc(s). 2519.000 2519.000 2519.000 2519.000 2519.000 2519.000 578 180° hinges 2 pc(s). 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 574 20 pc(s). 2326.000 2326.000 2326.000 2326.000 2326.000 2326.000 575 Earth straps see page see page see page see page see page see page 644 LED system light see page see page see page see page see page see page 637 Plastic wiring plan pocket from page from page from page from page from page from page 577 2426.500 2426.500 2426.500 2426.500 2426.500 2426.500 581 from page from page from page from page from page from page 560 Page Support strips Dust guard trim 1 pc(s). Lock systems Width (B) mm Packs of 600 760 760 800 800 800 Height (H) mm 1200 760 760 600 1000 1200 Depth (T) mm 300 210 300 300 300 300 Mounting plate width (F) mm 540 704 704 749 739 740 Mounting plate height (G) mm 1155 730 730 570 955 1155 Material thickness - enclosure mm 1.5 1.5 1.5 1.5 1.5 1.5 Material thickness - door mm 2.0 2.0 2.0 2.0 2.0 2.0 Mounting plate thickness mm 3.0 3.0 3.0 2.5 3.0 3.0 1260.500 1077.500 1073.500 1055.500 1180.500 1280.500 Model No. 1 pc(s). Weight kg 55.0 40.0 44.5 33.9 57.0 70.0 Protection category IP to IEC 60 529 IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 NEMA 4 NEMA 4 NEMA 4 NEMA 4 NEMA 4 NEMA 4 Door(s) 1 1 1 1 1 1 Door hinged on the right, may be swapped to the left ◾ ◾ ◾ ◾ ◾ ◾ Gland plate, size 5 5 5 5 5 5 Gland plates, qty. 1 1 1 1 1 1 Cam lock – 2 2 2 2 – 3-point lock system ◾ – – – – ◾ Protection category NEMA Product-specific scope of supply Accessories Gland plates from page from page from page from page from page from page 653 Rails for interior installation 4 pc(s). 2383.300 2383.210 2383.300 2383.300 2383.300 2383.300 605 Wall mounting bracket 4 pc(s). 2508.100 2508.100 2508.100 2508.100 2508.100 2508.100 587 Baying kit 1 set(s) – 1199.100 1199.100 1199.100 – – 548 Door stay 5 pc(s). 2519.000 2519.000 2519.000 2519.000 2519.000 2519.000 578 180° hinges 2 pc(s). 2449.000 2449.000 2449.000 2449.000 2449.000 2449.000 574 20 pc(s). 2326.000 2327.000 2327.000 2328.000 2328.000 2328.000 575 4 pc(s). 2509.000 – – – – 2509.000 586 see page see page see page see page see page see page 644 637 Support strips Eyebolts Earth straps LED system light see page see page see page see page see page see page Plastic wiring plan pocket from page from page from page from page from page from page 577 2426.500 2426.500 2426.500 2426.500 2426.500 2426.500 581 from page from page from page from page from page from page 560 Dust guard trim Lock systems 48 1 pc(s). Rittal Catalogue 34/Enclosures Compact enclosures AE Width (B) mm Packs of 1000 1000 1000 1000 1000 Height (H) mm 760 760 1000 1200 1400 Depth (T) mm 210 300 300 300 300 Mounting plate width (F) mm 944 944 939 940 940 Mounting plate height (G) mm 730 730 955 1155 1355 Material thickness - enclosure mm 1.5 1.5 1.5 1.5 1.5 Material thickness - door mm 2.0 2.0 2.0 2.0 2.0 Mounting plate thickness mm 3.0 3.0 3.0 3.0 3.0 1100.500 1130.500 1110.500 1213.500 1114.500 Model No. 1 pc(s). Weight kg 52.0 56.0 71.0 85.0 97.0 Protection category IP to IEC 60 529 IP 55 IP 55 IP 55 IP 55 IP 55 NEMA 12 NEMA 12 NEMA 12 NEMA 12 NEMA 12 Door(s) 2 2 2 2 2 Door hinged on the right, may be swapped to the left – – – – – Gland plate, size 4 4 4 4 4 Gland plates, qty. 2 2 2 2 2 Cam lock 2 2 2 – – 3-point lock system – – – ◾ ◾ Protection category NEMA Page Product-specific scope of supply Accessories Gland plates from page from page from page from page from page Rails for interior installation 4 pc(s). 2383.210 2383.300 2383.300 2383.300 2383.300 605 Wall mounting bracket 4 pc(s). 2508.100 2508.100 2508.100 2508.100 2508.100 587 Baying kit 1 set(s) 1199.100 1199.100 – – – 548 Door stay 5 pc(s). 2519.000 2519.000 2519.000 2519.000 2519.000 578 180° hinges 2 pc(s). 2449.000 2449.000 2449.000 2449.000 2449.000 574 20 pc(s). 2325.000 2325.000 2325.000 2325.000 2325.000 575 586 Support strips Eyebolts 4 pc(s). 653 – – – 2509.000 2509.000 Earth straps see page see page see page see page see page 644 LED system light see page see page see page see page see page 637 from page from page from page from page from page 577 2426.500 2426.500 2426.500 2426.500 2426.500 581 from page from page from page from page from page 560 Plastic wiring plan pocket Dust guard trim Accessories Lock systems Rittal Catalogue 34/Enclosures 1 pc(s). Rain canopies see page 580 49 Compact system enclosures CM System accessories Page 507 System lights Page 634 Cable duct Page 673 Climate control Page 307 Colour: – RAL 7035 Approvals: – UL – CSA – TÜV – Lloyds Register of Shipping Protection category NEMA: – NEMA 12 with selection of the appropriate gland plates or trim panel Technical details: Available on the Internet F B G Surface finish: – Enclosure and door: Dipcoatprimed, powder-coated on the outside, textured paint – Mounting plate: Zinc-plated Protection category IP to IEC 60 529: – IP 55 with selection of the appropriate gland plates or trim panel H Material: – Enclosure: Sheet steel 1.5 mm – Door: Sheet steel, 2.0 mm, allround foamed-in PU seal – Mounting plate: Sheet steel 3.0 mm Supply includes: – Enclosure with hinged door(s) – 3-point locking system with double-bit insert – Mounting plate – Open base for individual cable entry T Width 600 – 800 mm Width (B) mm 600 600 600 600 800 800 800 800 Height (H) mm 800 1000 1200 1200 1000 1000 1200 1200 Depth (T) mm 400 400 300 400 300 400 300 400 Mounting plate width (F) mm 540 540 540 540 740 740 740 740 Mounting plate height (G) mm 755 955 1155 1155 955 955 1155 1155 Model No. Packs of Page 1 pc(s). 5110.500 5111.500 5112.500 5113.500 5114.500 5115.500 5116.500 5117.500 Weight kg 39.0 49.0 52.0 56.0 57.0 61.0 65.0 71.0 Door(s) 1 1 1 1 1 1 1 1 Door hinged on the right, may be swapped to the left ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ Accessories Base/plinth Trim panel from page from page from page from page from page from page from page from page 1 pc(s). 5001.130 5001.130 Gland plates see page – see page 510 – 5001.130 – 5001.140 – 5001.140 117 see page see page see page see page see page see page 525 Rails for interior installation, for height 4 pc(s). 5001.052 5001.053 5001.053 5001.052 5001.052 5001.053 5001.053 605 Rails for interior installation, for width 4 pc(s). 5001.050 5001.050 5001.050 5001.050 5001.051 5001.051 5001.051 5001.051 605 TS punched section with mounting flange, 17 x 73 mm, for depth 4 pc(s). 8612.140 8612.140 8612.130 8612.140 8612.130 8612.140 8612.130 8612.140 606 TS punched section with mounting flange, 17 x 73 mm, for width 4 pc(s). 8612.060 8612.060 8612.060 8612.060 8612.080 8612.080 8612.080 8612.080 606 Base configuration rail 2 pc(s). 5001.370 5001.370 5001.371 5001.370 5001.371 5001.370 5001.371 5001.370 608 TS support strips 20 pc(s). 4596.000 4596.000 4596.000 4596.000 4598.000 4598.000 4598.000 4598.000 575 Cable clamp rails 1 pc(s). 5001.080 5001.080 5001.080 5001.080 5001.081 5001.081 5001.081 5001.081 665 Sheet steel wiring plan pockets 1 pc(s). 4116.500 4116.500 4116.500 4116.500 4118.500 4118.500 4118.500 4118.500 578 Rain canopies, sheet steel 1 pc(s). 5001.310 5001.310 5001.330 580 Rail systems from page from page from page from page from page from page from page from page 605 Lock systems from page from page from page from page from page from page from page from page 560 50 – 5001.310 – 5001.330 – Rittal Catalogue 34/Enclosures Compact system enclosures CM Width 1000 – 1200 mm Width (B) mm 1000 1000 1000 1000 1000 1200 Height (H) mm Packs of 1000 1200 1200 1400 1400 1200 Depth (T) mm 300 300 400 300 400 400 Mounting plate width (F) mm 940 940 940 940 940 1140 Mounting plate height (G) mm Model No. 1 pc(s). Weight kg 955 1155 1155 1355 1355 1155 5118.500 5119.500 5120.500 5121.500 5122.500 5123.500 Page 70.0 82.0 86.0 95.0 100.0 102.0 Door(s) 2 2 2 2 2 2 Door hinged on the right, may be swapped to the left – – – – – – from page from page from page from page from page from page 510 – – 5001.150 – 5001.150 5001.160 117 see page see page see page see page see page see page 525 4 pc(s). 5001.052 5001.053 5001.053 5001.054 5001.054 5001.053 605 – – – – – 5001.053 605 4 pc(s). 8612.130 8612.130 8612.140 8612.130 8612.140 8612.140 606 Accessories Base/plinth Trim panel 1 pc(s). Gland plates Rails for interior installation, for height Rails for interior installation, for width TS punched section with mounting flange, 17 x 73 mm, for depth 4 pc(s). 8612.000 8612.000 8612.000 8612.000 8612.000 8612.020 606 Base configuration rail 2 pc(s). 5001.371 5001.371 5001.370 5001.371 5001.370 5001.370 608 TS support strips 20 pc(s). 4309.000 4309.000 4309.000 4309.000 4309.000 4596.000 575 Cable clamp rails 1 pc(s). 5001.082 5001.082 5001.082 5001.082 5001.082 5001.083 665 Sheet steel wiring plan pockets 1 pc(s). 4115.500 4115.500 4115.500 4115.500 4115.500 4116.500 578 Rain canopies, sheet steel 1 pc(s). – – 5001.350 – 5001.350 5001.360 580 Rail systems from page from page from page from page from page from page 605 Lock systems from page from page from page from page from page from page 560 Accessories TS punched section with mounting flange, 17 x 73 mm, for width Rittal Catalogue 34/Enclosures TS punched section with mounting flange see page 606 51 Plastic enclosures KS System accessories Page 507 KS for potentially explosive areas Page 194 Surface finish: – Enclosure and door: Dyed plastic with no after-treatment – Mounting plate: Zinc-plated Colour: – Similar to RAL 7035 Supply includes: – Enclosure with hinged door, of all-round solid construction, 3 mm double-bit lock – Mounting plate – Twin seal on the top and bottom edges of the door as integral rain protection strip – Press-fitted C sections at the sides for infinitely variable mounting plate depth adjustment Please note the product-specific scope of supply. Approvals: – TÜV – Germanischer Lloyd – Russian Maritime Register of Shipping – Lloyds Register of Shipping – Bureau Veritas F T G B Technical details: Available on the Internet Note: – Under the influence of longterm UV radiation (sunlight) in conjunction with wind and rain, the surface finish may become visually impaired. This does not affect the protection of the installed electrical components in any way. If the enclosures cannot be protected from UV radiation, we recommend that they should be painted with a PUR paint. Ambient temperature -30°C...+75°C. Width (B) mm 200 250 300 400 400 400 400 500 Height (H) mm 300 350 400 400 400 600 600 500 Depth (T) mm 150 150 200 200 200 200 200 300 Mounting plate width (F) mm 145 195 245 345 345 345 345 417 Mounting plate height (G) mm 250 300 350 350 350 550 550 450 Mounting plate thickness mm 2.0 2.0 2.0 2.5 2.5 2.5 2.5 2.5 Model No. Packs of H Material: – Enclosure and door: Fibreglass-reinforced unsaturated polyester – Door: All-round foamed-in PU seal – Mounting plate: Sheet steel – Viewing window: Glazed acrylic, 3.0 mm with all-round rubber cable clamp strip 1 pc(s). Weight kg Protection category IP to IEC 60 529 Protection category NEMA Page 1423.500 1432.500 1434.500 1444.500 1448.500 1446.500 1449.500 1453.500 3.4 4.3 5.9 7.9 8.0 11.5 11.2 13.5 IP 66 IP 66 IP 66 IP 66 IP 56 IP 66 IP 56 IP 66 NEMA 4X NEMA 4X NEMA 4X NEMA 4X NEMA 12 NEMA 4X NEMA 12 NEMA 4X Product-specific scope of supply Door(s) 1 1 1 1 1 1 1 1 Door hinged on the right, may be swapped to the left ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ Removable centre bar, lockable door on right – – – – – – – – Viewing window – – – – ◾ – ◾ – Cam lock 1 1 2 2 2 2 2 2 3-point lock system – – – – – – – – Accessories Mounting plate adjustment bracket 4 pc(s). 1481.000 1481.000 1481.000 1481.000 1481.000 1481.000 1481.000 1491.000 594 Threaded inserts M6 20 pc(s). 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 625 Pole clamp 1 set(s) 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 589 Wall mounting bracket 4 pc(s). 1483.010 1483.010 1483.010 1483.010 1483.010 1483.010 1483.010 1483.010 588 Lock systems 52 from page from page from page from page from page from page from page from page 560 Rittal Catalogue 34/Enclosures Plastic enclosures KS Width (B) mm 500 600 600 600 600 800 800 1000 Height (H) mm 500 600 600 800 800 1000 1000 1000 Depth (T) mm 300 200 200 300 300 300 300 300 Mounting plate width (F) mm 417 545 545 517 517 717 717 917 Mounting plate height (G) mm 450 550 550 750 750 950 950 950 Mounting plate thickness mm 2.5 2.5 2.5 3.0 3.0 3.0 3.0 3.0 Model No. Packs of 1 pc(s). 1454.500 1466.500 1467.500 1468.500 1469.500 1479.500 1480.500 1400.500 Weight kg 13.4 15.9 15.6 26.5 26.0 39.9 41.7 51.6 Protection category IP to IEC 60 529 IP 56 IP 66 IP 56 IP 66 IP 56 IP 56 IP 66 IP 56 Protection category NEMA Page NEMA 12 NEMA 4X NEMA 12 NEMA 4X NEMA 12 NEMA 12 NEMA 4X NEMA 12 Product-specific scope of supply Door(s) 1 1 1 1 1 1 1 Door hinged on the right, may be swapped to the left ◾ ◾ ◾ ◾ ◾ ◾ ◾ 2 – Removable centre bar, lockable door on right – – – – – – – ◾ Viewing window ◾ – ◾ – ◾ ◾ – – Cam lock 2 2 2 – – – – – 3-point lock system – – – ◾ ◾ ◾ ◾ ◾ Accessories Mounting plate adjustment bracket 4 pc(s). 1491.000 1481.000 1481.000 1491.000 1491.000 1491.000 1491.000 1491.000 594 Threaded inserts M6 20 pc(s). 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 625 Pole clamp 1 set(s) 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 589 Wall mounting bracket 4 pc(s). 1483.010 1483.010 1483.010 1483.010 1483.010 1483.010 1483.010 1483.010 588 Accessories Lock systems Rittal Catalogue 34/Enclosures from page from page from page from page from page from page from page from page 560 Spare filter mats see page 371 53 54 Rittal Catalogue 34/Enclosures Enclosure systems Baying systems TS 8 Height 1200/1400 mm, depth 500 mm ........................................................63 Height 1600 mm, depth 500 mm..................................................................64 Height 1800 mm, depth 400 mm..................................................................65 Height 1800 mm, depth 500 mm..................................................................66 Height 1800 mm, depth 600 mm..................................................................67 Height 2000 mm, depth 400 mm..................................................................68 Height 2000 mm, depth 500 mm..................................................................69 Height 2000 mm, depth 600 mm..................................................................70 Height 2000 mm, depth 800 mm..................................................................71 Height 2200 mm, depth 600 mm..................................................................72 Electronic enclosures....................................................................................73 IP 66/NEMA 4 ..............................................................................................74 Distribution enclosures..................................................................................75 Modular enclosures, height 2000 mm...........................................................76 Modular enclosures, height 2200 mm...........................................................77 Fuse-switch-disconnector enclosures...........................................................78 Busbar enclosures........................................................................................79 EMC enclosures ...........................................................................................80 System enclosures SE 8 Width 600 – 800 mm....................................................................................81 Width 1000 – 1800 mm ................................................................................82 IP 66/NEMA 4 ..............................................................................................83 Rittal Catalogue 34/Enclosures 55 Baying systems TS 8 System enclosures SE 8 56 Rittal Catalogue 34/Enclosures Improved mounting plate ◾ Simple, one-person assembly ◾ The mounting plate slides easily on slide rails with plastic skids, slide rails may also be used for interior installation ◾ Easy positioning of the mounting plate on a 25 mm pitch pattern New Flex-Block base/ plinth system ◾ Fast assembly by simply clipping together the base/plinth components ◾ The enclosure is easily transported, both when empty and fully configured, by removing the base/plinth trim panel ◾ Space-saving cable management in the base/plinth means more space for enclosure configuration Comprehensive potential equalisation ◾ All panels and gland plates in standard enclosures may be conductively connected via assembly components Rittal Catalogue 34/Enclosures 57 Baying systems TS 8 58 Rittal Catalogue 34/Enclosures Versatile baying options ◾ Around corners, forwards, backwards, to the left or right or even upwards; the baying options are unlimited ◾ Baying connection technology for fast assembly and stable, permanent baying ◾ Bayed TS 8 enclosures may be transported Symmetrical frame ◾ Symmetrical layout supports access from all sides ◾ Identical system accessories in the width and depth for interior installation ◾ Accessible from all sides, due to hinged side panels Universal interior installation ◾ Two symmetrical levels with identical pitch patterns in the width and depth. ◾ Interior installation with two mounting levels ◾ Up to 15% better space utilisation due to consistent use of the outer mounting level ◾ Extensive system accessories tailored to the frame section for individual interior installation Rittal Catalogue 34/Enclosures 59 System enclosures SE 8 60 Rittal Catalogue 34/Enclosures Smart design ◾ High stability thanks to a self-supporting, integral construction technique, roof and sides from a single piece with extruded “frame” ◾ High protection category ◾ Sheet steel and stainless steel versions for almost every application area Time-saving interior installation ◾ Identical mounting plate and compatibility with the TS 8 baying system for uniform engineering ◾ Minimal assembly work due to the extruded side panels Unlimited installation options ◾ Automatic potential equalisation ◾ Optimum cable entry ◾ Wide range of accessories with TS 8 system platform ◾ Different base/plinth variants: Flex-Block, cable chamber or standard base/plinth in sheet steel or stainless steel Rittal Catalogue 34/Enclosures 61 Baying systems TS 8 System accessories Page 507 TS 8 stainless steel Page 182 TS 8 EMC-shielded Page 80 TS 8 IP 66/NEMA 4X Page 183 Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 55 Protection category NEMA: – NEMA 12 B B G T T H Note: – Design enclosure width 400 mm: Without tubular door frame, mounting plate and gland plates. Protection category IP 55 and NEMA 12 are not met F F G Supply includes: – Enclosure frame with door(s) – Roof plate – Gland plates – Rear panel – Mounting plate – 4 eyebolts – Lock: 3 mm double-bit H Material and surface finish: – Enclosure frame: Sheet steel, 1.5 mm, dipcoat-primed – Roof: Sheet steel, 1.5 mm, dipcoat-primed, powdercoated on the outside, textured paint – Door: Sheet steel, 2 mm, dipcoat-primed, powdercoated on the outside, textured paint – Rear panel: Sheet steel, 1.5 mm, dipcoat-primed, powder-coated on the outside, textured paint – Gland plates: Sheet steel, 1.5 mm, zinc-plated – Mounting plate: Sheet steel, 3 mm, zinc-plated Approvals: – UL – CSA – TÜV – Norske Veritas – Germanischer Lloyd – Russian Maritime Register of Shipping – Lloyds Register of Shipping – Bureau Veritas – VDE Technical details: Available on the Internet 62 Rittal Catalogue 34/Enclosures Baying systems TS 8 Height 1200/1400 mm, depth 500 mm Width (B) mm 600 800 1200 600 800 1200 Height (H) mm Packs of 1200 1200 1200 1400 1400 1400 Depth (T) mm 500 500 500 500 500 500 Mounting plate width (F) mm 499 699 1099 499 699 1099 Mounting plate height (G) mm Model No. 1 pc(s). Door(s) Weight kg 2 support strips fitted in the enclosure depth 1096 1096 1096 1296 1296 1296 8615.500 8815.500 8215.500 8645.500 8845.500 8245.500 1 1 2 1 1 2 74.5 92.1 140.0 86.0 107.5 163.5 – – – – – – 8115.235 8115.235 8115.235 8145.235 8145.235 8145.235 – – – – – – Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). Divider panel Divider panel for module plates – – – – – – Glazed door – – – – – – 534 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 8100.000 8100.000 8100.000 Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.600 8100.800 8100.120 8100.600 8100.800 8100.120 511 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.500 8100.500 8100.500 8100.500 8100.500 8100.500 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 8200.000 8200.000 8200.000 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.600 8200.800 8200.120 8200.600 8200.800 8200.120 511 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.500 8200.500 8200.500 8200.500 8200.500 8200.500 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.600 8601.800 8601.200 8601.600 8601.800 8601.200 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.050 8601.050 8601.050 8601.050 8601.050 8601.050 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.600 8602.800 8602.200 8602.600 8602.800 8602.200 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.050 8602.050 8602.050 8602.050 8602.050 8602.050 514 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 4612.000 4612.000 520 Cable clamp rails 2 pc(s). 4191.000 4192.000 4196.000 4191.000 4192.000 4196.000 665 C rails 30/15 6 pc(s). Section for cable entry, rear Cable entry plates Packs of Packs of 511 4944.000 4945.000 4947.000 4944.000 4945.000 4947.000 612 8802.065 8802.085 8802.125 8802.065 8802.085 8802.125 652 1 set(s) 1 set(s) 2 set(s) 1 set(s) 1 set(s) 2 set(s) 8800.060 8800.080 8800.120 8800.060 8800.080 8800.120 2 pc(s). 2 pc(s). 4 pc(s). 2 pc(s). 2 pc(s). 4 pc(s). 650 Snap-on nut TS see page see page see page see page see page see page 618 TS support strips see page see page see page see page see page see page 609 Rail systems from page from page from page from page from page from page 605 Baying system from page from page from page from page from page from page 542 Sheet steel wiring plan pockets see page see page see page see page see page see page 578 180° hinges see page see page see page see page see page see page 574 Door stay for escape routes 1 pc(s). 4583.500 4583.500 4583.500 4583.500 4583.500 4583.500 578 Ride-up roller 10 pc(s). 4538.000 4538.000 4538.000 4538.000 4538.000 4538.000 579 Cable duct for vertical TS section see page see page see page see page see page see page 663 Cable duct see page see page see page see page see page see page 673 Mounting plate – – – – – – System lights from page from page from page from page from page from page 634 Earth straps see page see page see page see page see page see page 644 Lock systems from page from page from page from page from page from page 561 Rittal Catalogue 34/Enclosures 63 Baying systems TS 8 Height 1600 mm, depth 500 mm Width (B) mm 600 800 1200 Height (H) mm Packs of 1600 1600 1600 Depth (T) mm 500 500 500 Mounting plate width (F) mm 499 699 1099 Mounting plate height (G) mm Model No. 1 pc(s). Door(s) Weight kg 2 support strips fitted in the enclosure depth 1496 1496 1496 8665.500 8865.500 8265.500 1 1 2 100.0 103.0 159.3 – – – 8165.235 8165.235 8165.235 – – – Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). Divider panel Divider panel for module plates – – – Glazed door – – – 534 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.600 8100.800 8100.120 511 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.500 8100.500 8100.500 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.600 8200.800 8200.120 511 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.500 8200.500 8200.500 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.600 8601.800 8601.200 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.050 8601.050 8601.050 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.600 8602.800 8602.200 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.050 8602.050 8602.050 514 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 520 Cable clamp rails 2 pc(s). 4191.000 4192.000 4196.000 665 C rails 30/15 6 pc(s). 4944.000 4945.000 4947.000 612 8802.065 8802.085 8802.125 652 1 set(s) 1 set(s) 2 set(s) 8800.060 8800.080 8800.120 2 pc(s). 2 pc(s). 4 pc(s). Section for cable entry, rear Cable entry plates Packs of Packs of 511 650 Snap-on nut TS see page see page see page 618 TS support strips see page see page see page 609 Rail systems from page from page from page 605 Baying system from page from page from page 542 Sheet steel wiring plan pockets see page see page see page 578 180° hinges see page see page see page 574 Door stay for escape routes 1 pc(s). 4583.500 4583.500 4583.500 578 Ride-up roller 10 pc(s). 4538.000 4538.000 4538.000 579 Cable duct for vertical TS section see page see page see page 663 Cable duct see page see page see page 673 – – – System lights from page from page from page Earth straps see page see page see page 644 Lock systems from page from page from page 561 Mounting plate 64 634 Rittal Catalogue 34/Enclosures Baying systems TS 8 Height 1800 mm, depth 400 mm Width (B) mm 600 800 1000 1000 1200 Height (H) mm Packs of 1800 1800 1800 1800 1800 Depth (T) mm 400 400 400 400 400 Mounting plate width (F) mm 499 699 899 899 1099 Mounting plate height (G) mm Model No. 1 pc(s). Door(s) Weight kg 2 support strips fitted in the enclosure depth 1696 1696 1696 1696 1696 8684.500 8884.500 8080.500 8084.500 8284.500 1 1 2 1 2 91.3 113.5 140.0 136.4 170.6 – – – – – Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8184.235 8184.235 8184.235 8184.235 8184.235 534 Divider panel 1 pc(s). 8609.840 8609.840 8609.840 8609.840 8609.840 537 – – – – – Glazed door 1 pc(s). 8610.685 8610.885 – – – 549 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 8100.000 8100.000 511 511 Divider panel for module plates Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.600 8100.800 8100.010 8100.010 8100.120 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.400 8100.400 8100.400 8100.400 8100.400 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 8200.000 8200.000 511 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.600 8200.800 8200.010 8200.010 8200.120 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.400 8200.400 8200.400 8200.400 8200.400 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.600 8601.800 8601.000 8601.000 8601.200 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.040 8601.040 8601.040 8601.040 8601.040 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.600 8602.800 8602.000 8602.000 8602.200 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.040 8602.040 8602.040 8602.040 8602.040 514 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 4612.000 520 Cable clamp rails 2 pc(s). 4191.000 4192.000 4336.000 4336.000 4196.000 665 C rails 30/15 6 pc(s). 4944.000 4945.000 4946.000 4946.000 4947.000 612 8802.065 8802.085 8802.105 8802.105 8802.125 652 1 set(s) 1 set(s) 2 set(s) 2 set(s) 2 set(s) Section for cable entry, rear Packs of 8800.060 8800.080 8800.100 8800.100 8800.120 Packs of 2 pc(s). 2 pc(s). 4 pc(s). 4 pc(s). 4 pc(s). see page see page see page see page see page 618 20 pc(s). 4596.000 see page see page see page see page 609 Rail systems from page from page from page from page from page 605 Baying system from page from page from page from page from page 542 Cable entry plates Snap-on nut TS TS support strips Sheet steel wiring plan pockets 1 pc(s). 180° hinges 650 see page see page see page 4124.000 see page 578 see page see page see page see page see page 574 Door stay for escape routes 1 pc(s). 4583.500 4583.500 4583.500 4583.500 4583.500 578 Ride-up roller 10 pc(s). 4538.000 4538.000 4538.000 4538.000 4538.000 579 Cable duct for vertical TS section see page see page see page see page see page 663 Cable duct see page see page see page see page see page 673 – – – – – System lights from page from page from page from page from page 634 Earth straps see page see page see page see page see page 644 Lock systems from page from page from page from page from page 561 Mounting plate Rittal Catalogue 34/Enclosures 65 Baying systems TS 8 Height 1800 mm, depth 500 mm Width (B) mm 400 600 800 800 1200 Height (H) mm Packs of 1800 1800 1800 1800 1800 Depth (T) mm 500 500 500 500 500 – 499 699 699 1099 Mounting plate width (F) mm Mounting plate height (G) mm Model No. 1 pc(s). Door(s) Weight kg 2 support strips fitted in the enclosure depth – 1696 1696 1696 1696 8485.510 8685.500 8880.500 8885.500 8285.500 1 1 2 1 2 49.2 93.8 122.5 115.8 173.3 – – – – – Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8185.235 8185.235 8185.235 8185.235 8185.235 534 Divider panel 1 pc(s). 8609.850 8609.850 8609.850 8609.850 8609.850 537 Divider panel for module plates 1 pc(s). 8609.100 8609.100 8609.100 8609.100 8609.100 538 Glazed door 1 pc(s). – 8610.685 – 8610.885 – 549 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 8100.000 8100.000 511 511 Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.400 8100.600 8100.800 8100.800 8100.120 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.500 8100.500 8100.500 8100.500 8100.500 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 8200.000 8200.000 511 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.400 8200.600 8200.800 8200.800 8200.120 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.500 8200.500 8200.500 8200.500 8200.500 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.400 8601.600 8601.800 8601.800 8601.200 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.050 8601.050 8601.050 8601.050 8601.050 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.400 8602.600 8602.800 8602.800 8602.200 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.050 8602.050 8602.050 8602.050 8602.050 514 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 4612.000 520 Cable clamp rails 2 pc(s). 4193.000 4191.000 4192.000 4192.000 4196.000 665 C rails 30/15 6 pc(s). – 4944.000 4945.000 4945.000 4947.000 612 – 8802.065 8802.085 8802.085 8802.125 652 Packs of – 1 set(s) 1 set(s) 1 set(s) 2 set(s) – 8800.060 8800.080 8800.080 8800.120 – 2 pc(s). 2 pc(s). 2 pc(s). 4 pc(s). Section for cable entry, rear Cable entry plates Packs of 650 Snap-on nut TS see page see page see page see page see page 618 TS support strips – see page see page see page see page 609 Rail systems from page from page from page from page from page 605 Baying system from page from page from page from page from page 542 Sheet steel wiring plan pockets 180° hinges – see page see page see page see page 578 see page see page see page see page see page 574 Door stay for escape routes 1 pc(s). – 4583.500 4583.500 4583.500 4583.500 578 Ride-up roller 10 pc(s). 4538.000 4538.000 4538.000 4538.000 4538.000 579 Cable duct for vertical TS section see page see page see page see page see page 663 Cable duct see page see page see page see page see page 673 8614.180 – – – – 591 from page from page from page from page from page 634 Mounting plate System lights 1 pc(s). Earth straps see page see page see page see page see page 644 Lock systems from page from page from page from page from page 561 66 Rittal Catalogue 34/Enclosures Baying systems TS 8 Height 1800 mm, depth 600 mm Width (B) mm 400 600 800 800 1200 Height (H) mm Packs of 1800 1800 1800 1800 1800 Depth (T) mm 600 600 600 600 600 – 499 699 699 1099 Mounting plate width (F) mm Mounting plate height (G) mm Model No. 1 pc(s). Door(s) Weight kg 2 support strips fitted in the enclosure depth – 1696 1696 1696 1696 8486.510 8686.500 8881.500 8886.500 8286.500 1 1 2 1 2 51.7 96.8 125.8 120.3 179.9 ◾ ◾ ◾ ◾ ◾ Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8186.235 8186.235 8186.235 8186.235 8186.235 534 Divider panel 1 pc(s). 8609.860 8609.860 8609.860 8609.860 8609.860 537 Divider panel for module plates 1 pc(s). 8609.110 8609.110 8609.110 8609.110 8609.110 538 Glazed door 1 pc(s). – 8610.685 8610.885 8610.885 – 549 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 8100.000 8100.000 511 511 Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.400 8100.600 8100.800 8100.800 8100.120 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.600 8100.600 8100.600 8100.600 8100.600 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 8200.000 8200.000 511 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.400 8200.600 8200.800 8200.800 8200.120 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.600 8200.600 8200.600 8200.600 8200.600 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.400 8601.600 8601.800 8601.800 8601.200 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.060 8601.060 8601.060 8601.060 8601.060 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.400 8602.600 8602.800 8602.800 8602.200 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.060 8602.060 8602.060 8602.060 8602.060 514 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 4612.000 520 Cable clamp rails 2 pc(s). 4193.000 4191.000 4192.000 4192.000 4196.000 665 C rails 30/15 6 pc(s). – 4944.000 4945.000 4945.000 4947.000 612 – 8802.065 8802.085 8802.085 8802.125 652 Packs of – 1 set(s) 1 set(s) 1 set(s) 2 set(s) – 8800.060 8800.080 8800.080 8800.120 – 2 pc(s). 2 pc(s). 2 pc(s). 4 pc(s). Section for cable entry, rear Cable entry plates Packs of 650 Snap-on nut TS see page see page see page see page see page 618 TS support strips – see page see page see page see page 609 Rail systems from page from page from page from page from page 605 Baying system from page from page from page from page from page 542 Sheet steel wiring plan pockets 180° hinges – see page see page see page see page 578 see page see page see page see page see page 574 Door stay for escape routes 1 pc(s). – 4583.500 4583.500 4583.500 4583.500 578 Ride-up roller 10 pc(s). 4538.000 4538.000 4538.000 4538.000 4538.000 579 Cable duct for vertical TS section see page see page see page see page see page 663 Cable duct see page see page see page see page see page 673 8614.180 – – – – 591 from page from page from page from page from page 634 Mounting plate System lights 1 pc(s). Earth straps see page see page see page see page see page 644 Lock systems from page from page from page from page from page 561 Rittal Catalogue 34/Enclosures 67 Baying systems TS 8 Height 2000 mm, depth 400 mm Width (B) mm 600 800 1000 1200 Height (H) mm Packs of 2000 2000 2000 2000 Depth (T) mm 400 400 400 400 Mounting plate width (F) mm 499 699 899 1099 Mounting plate height (G) mm Model No. 1 pc(s). Door(s) Weight kg 2 support strips fitted in the enclosure depth 1896 1896 1896 1896 8604.500 8804.500 8004.500 8204.500 1 1 2 2 99.0 124.0 152.8 184.5 – – – – Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8104.235 8104.235 8104.235 8104.235 534 Divider panel 1 pc(s). 8609.040 8609.040 8609.040 8609.040 537 – – – – Divider panel for module plates Glazed door 1 pc(s). 8610.605 8610.805 – – 549 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 8100.000 511 511 Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.600 8100.800 8100.010 8100.120 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.400 8100.400 8100.400 8100.400 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 8200.000 511 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.600 8200.800 8200.010 8200.120 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.400 8200.400 8200.400 8200.400 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.600 8601.800 8601.000 8601.200 513 514 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.040 8601.040 8601.040 8601.040 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.600 8602.800 8602.000 8602.200 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.040 8602.040 8602.040 8602.040 514 520 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 Cable clamp rails 2 pc(s). 4191.000 4192.000 4336.000 4196.000 665 C rails 30/15 6 pc(s). 4944.000 4945.000 4946.000 4947.000 612 8802.065 8802.085 8802.105 8802.125 652 1 set(s) 1 set(s) 2 set(s) 2 set(s) 8800.060 8800.080 8800.100 8800.120 2 pc(s). 2 pc(s). 4 pc(s). 4 pc(s). Section for cable entry, rear Cable entry plates Packs of Packs of 650 Snap-on nut TS see page see page see page see page 618 TS support strips see page see page see page see page 609 Rail systems from page from page from page from page 605 Baying system from page from page from page from page 542 Sheet steel wiring plan pockets see page see page see page see page 578 180° hinges see page see page see page see page 574 Door stay for escape routes 1 pc(s). 4583.500 4583.500 4583.500 4583.500 578 Ride-up roller 10 pc(s). 4538.000 4538.000 4538.000 4538.000 579 Cable duct for vertical TS section see page see page see page see page 663 Cable duct see page see page see page see page 673 – – – – System lights from page from page from page from page Earth straps see page see page see page see page 644 Lock systems from page from page from page from page 561 Mounting plate 68 634 Rittal Catalogue 34/Enclosures Baying systems TS 8 Height 2000 mm, depth 500 mm Width (B) mm 400 600 800 1000 1200 Height (H) mm Packs of 2000 2000 2000 2000 2000 Depth (T) mm 500 500 500 500 500 – 499 699 899 1099 Mounting plate width (F) mm Mounting plate height (G) mm Model No. 1 pc(s). Door(s) Weight kg 2 support strips fitted in the enclosure depth – 1896 1896 1896 1896 8405.510 8605.500 8805.500 8005.500 8205.500 1 1 1 2 2 60.7 101.3 126.3 157.1 190.6 – – – – – Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8105.235 8105.235 8105.235 8105.235 8105.235 534 Divider panel 1 pc(s). 8609.050 8609.050 8609.050 8609.050 8609.050 537 Divider panel for module plates 1 pc(s). 8609.120 8609.120 8609.120 8609.120 8609.120 538 Glazed door 1 pc(s). – 8610.605 8610.805 – – 549 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 8100.000 8100.000 511 511 Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.400 8100.600 8100.800 8100.010 8100.120 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.500 8100.500 8100.500 8100.500 8100.500 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 8200.000 8200.000 511 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.400 8200.600 8200.800 8200.010 8200.120 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.500 8200.500 8200.500 8200.500 8200.500 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.400 8601.600 8601.800 8601.000 8601.200 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.050 8601.050 8601.050 8601.050 8601.050 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.400 8602.600 8602.800 8602.000 8602.200 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.050 8602.050 8602.050 8602.050 8602.050 514 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 4612.000 520 Cable clamp rails 2 pc(s). 4193.000 4191.000 4192.000 4336.000 4196.000 665 C rails 30/15 6 pc(s). – 4944.000 4945.000 4946.000 4947.000 612 – 8802.065 8802.085 8802.105 8802.125 652 Packs of – 1 set(s) 1 set(s) 2 set(s) 2 set(s) – 8800.060 8800.080 8800.100 8800.120 – 2 pc(s). 2 pc(s). 4 pc(s). 4 pc(s). Section for cable entry, rear Cable entry plates Packs of 650 Snap-on nut TS see page see page see page see page see page 618 TS support strips – see page see page see page see page 609 Rail systems from page from page from page from page from page 605 Baying system from page from page from page from page from page 542 Sheet steel wiring plan pockets 180° hinges – see page see page see page see page 578 see page see page see page see page see page 574 Door stay for escape routes 1 pc(s). – 4583.500 4583.500 4583.500 4583.500 578 Ride-up roller 10 pc(s). 4538.000 4538.000 4538.000 4538.000 4538.000 579 Cable duct for vertical TS section see page see page see page see page see page 663 Cable duct see page see page see page see page see page 673 8614.200 – – – – System lights from page from page from page from page from page 634 Earth straps see page see page see page see page see page 644 Lock systems from page from page from page from page from page 561 Mounting plate Rittal Catalogue 34/Enclosures 1 pc(s). 69 Baying systems TS 8 Height 2000 mm, depth 600 mm Width (B) mm 400 600 800 1000 1200 Height (H) mm Packs of 2000 2000 2000 2000 2000 Depth (T) mm 600 600 600 600 600 – 499 699 899 1099 Mounting plate width (F) mm Mounting plate height (G) mm Model No. 1 pc(s). Door(s) Weight kg 2 support strips fitted in the enclosure depth – 1896 1896 1896 1896 8406.510 8606.500 8806.500 8006.500 8206.500 1 1 1 2 2 55.7 104.0 130.5 161.2 194.6 ◾ ◾ ◾ ◾ ◾ Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8106.235 8106.235 8106.235 8106.235 8106.235 534 Divider panel 1 pc(s). 8609.060 8609.060 8609.060 8609.060 8609.060 537 Divider panel for module plates 1 pc(s). 8609.130 8609.130 8609.130 8609.130 8609.130 538 Glazed door 1 pc(s). – 8610.605 8610.805 – – 549 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 8100.000 8100.000 511 511 Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.400 8100.600 8100.800 8100.010 8100.120 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.600 8100.600 8100.600 8100.600 8100.600 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 8200.000 8200.000 511 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.400 8200.600 8200.800 8200.010 8200.120 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.600 8200.600 8200.600 8200.600 8200.600 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.400 8601.600 8601.800 8601.000 8601.200 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.060 8601.060 8601.060 8601.060 8601.060 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.400 8602.600 8602.800 8602.000 8602.200 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.060 8602.060 see page 8602.060 8602.060 514 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 4612.000 520 Cable clamp rails 2 pc(s). 4193.000 4191.000 4192.000 4336.000 4196.000 665 C rails 30/15 6 pc(s). – 4944.000 4945.000 4946.000 4947.000 612 – 8802.065 8802.085 8802.105 8802.125 652 Packs of – 1 set(s) 1 set(s) 2 set(s) 2 set(s) – 8800.060 8800.080 8800.100 8800.120 – 2 pc(s). 2 pc(s). 4 pc(s). 4 pc(s). Section for cable entry, rear Cable entry plates Packs of 650 Snap-on nut TS see page see page see page see page see page 618 TS support strips – see page see page see page see page 609 Rail systems from page from page from page from page from page 605 Baying system from page from page from page from page from page 542 Sheet steel wiring plan pockets 180° hinges – see page see page see page see page 578 see page see page see page see page see page 574 Door stay for escape routes 1 pc(s). – 4583.500 4583.500 4583.500 4583.500 578 Ride-up roller 10 pc(s). 4538.000 4538.000 4538.000 4538.000 4538.000 579 Cable duct for vertical TS section see page see page see page see page see page 663 Cable duct see page see page see page see page see page 673 8614.200 – – – – System lights from page from page from page from page from page 634 Earth straps see page see page see page see page see page 644 Lock systems from page from page from page from page from page 561 Mounting plate 70 1 pc(s). Rittal Catalogue 34/Enclosures Baying systems TS 8 Height 2000 mm, depth 800 mm Width (B) mm 600 800 1200 Height (H) mm Packs of 2000 2000 2000 Depth (T) mm 800 800 800 Mounting plate width (F) mm 499 699 1099 Mounting plate height (G) mm Model No. 1 pc(s). Door(s) Weight kg 2 support strips fitted in the enclosure depth 1896 1896 1896 8608.500 8808.500 8208.500 1 1 2 111.3 137.0 203.0 ◾ ◾ ◾ Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8108.235 8108.235 8108.235 534 Divider panel 1 pc(s). 8609.080 8609.080 8609.080 537 – – – Glazed door 1 pc(s). 8610.605 8610.805 – 549 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 511 Divider panel for module plates Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.600 8100.800 8100.120 511 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.800 8100.800 8100.800 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.600 8200.800 8200.120 511 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.800 8200.800 8200.800 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.600 8601.800 8601.200 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.080 8601.080 8601.080 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.600 8602.800 8602.200 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.080 8602.080 8602.080 514 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 520 Cable clamp rails 2 pc(s). 4191.000 4192.000 4196.000 665 C rails 30/15 6 pc(s). 4944.000 4945.000 4947.000 612 8802.065 8802.085 8802.125 652 1 set(s) 1 set(s) 2 set(s) 8800.060 8800.080 8800.120 2 pc(s). 2 pc(s). 4 pc(s). Section for cable entry, rear Cable entry plates Packs of Packs of 650 Snap-on nut TS see page see page see page 618 TS support strips see page see page see page 609 Rail systems from page from page from page 605 Baying system from page from page from page 542 Sheet steel wiring plan pockets see page see page see page 578 180° hinges see page see page see page 574 Door stay for escape routes 1 pc(s). 4583.500 4583.500 4583.500 578 Ride-up roller 10 pc(s). 4538.000 4538.000 4538.000 579 Cable duct for vertical TS section see page see page see page 663 Cable duct see page see page see page 673 – – – System lights from page from page from page Earth straps see page see page see page 644 Lock systems from page from page from page 561 Mounting plate Rittal Catalogue 34/Enclosures 634 71 Baying systems TS 8 Height 2200 mm, depth 600 mm Width (B) mm 600 800 1200 Height (H) mm Packs of 2200 2200 2200 Depth (T) mm 600 600 600 Mounting plate width (F) mm 499 699 1099 Mounting plate height (G) mm Model No. 1 pc(s). Door(s) Weight kg 2 support strips fitted in the enclosure depth 2096 2096 2096 8626.500 8826.500 8226.500 1 1 2 113.1 139.3 208.0 ◾ ◾ ◾ Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8126.235 8126.235 8126.235 534 Divider panel 1 pc(s). 8609.260 8609.260 8609.260 537 – – – 538 Glazed door 1 pc(s). 8610.625 8610.825 – 549 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 511 Divider panel for module plates Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.600 8100.800 8100.120 511 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.600 8100.600 8100.600 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.600 8200.800 8200.120 511 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.600 8200.600 8200.600 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.600 8601.800 8601.200 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.060 8601.060 8601.060 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.600 8602.800 8602.200 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.060 8602.060 8602.060 514 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 520 Cable clamp rails 2 pc(s). 4191.000 4192.000 4196.000 665 C rails 30/15 6 pc(s). 4944.000 4945.000 4947.000 612 8802.065 8802.085 8802.125 652 1 set(s) 1 set(s) 2 set(s) 8800.060 8800.080 8800.120 2 pc(s). 2 pc(s). 4 pc(s). Section for cable entry, rear Cable entry plates Packs of Packs of 650 Snap-on nut TS see page see page see page 618 TS support strips see page see page see page 609 Rail systems from page from page from page 605 Baying system from page from page from page 542 Sheet steel wiring plan pockets see page see page see page 578 180° hinges see page see page see page 574 Door stay for escape routes 1 pc(s). 4583.500 4583.500 4583.500 578 Ride-up roller 10 pc(s). 4538.000 4538.000 4538.000 579 Cable duct for vertical TS section see page see page see page 663 Cable duct see page see page see page 673 – – – System lights from page from page from page Earth straps see page see page see page 644 Lock systems from page from page from page 561 Mounting plate 72 634 Rittal Catalogue 34/Enclosures Baying systems TS 8 System accessories Page 507 482.6 mm (19") installation accessories Page 678 482.6 mm (19") climate control Page 307 Material and surface finish: – Enclosure frame: Sheet steel, 1.5 mm, dipcoat-primed – Roof: Sheet steel, 1.5 mm, dipcoat-primed, powdercoated on the outside, textured paint – Front frame: Extruded aluminium section with die-cast corner pieces, powder-coated – Rear door: Sheet steel, 2 mm, dipcoat-primed, powdercoated on the outside, textured paint – Gland plates: Sheet steel, 1.5 mm, zinc-plated – Adaptor sections: Aluminium Colour: – RAL 7035 Supply includes: – Enclosure frame – Front frame (r/h hinge, opening angle 130°, held on the left via mechanical snap fasteners) – Rear door (r/h hinge, may be swapped to opposite side) – Roof – Adaptor sections, 482.6 mm (19") attachment level – Gland plates Approvals: – UL – cUL Technical details: Available on the Internet Electronic enclosures Units U 33 33 42 42 Width mm 600 600 600 600 Height mm 1600 1600 2000 2000 Depth mm 600 800 600 800 8410.510 8418.510 8430.510 8438.510 1 1 1 1 Model No. Packs of 1 pc(s). Door(s) Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8166.235 8168.235 8106.235 8108.235 534 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 8100.000 511 511 Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.600 8100.600 8100.600 8100.600 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.600 8100.800 8100.600 8100.800 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 8200.000 511 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.600 8200.600 8200.600 8200.600 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.600 8200.800 8200.600 8200.800 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.600 8601.600 8601.600 8601.600 513 514 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.060 8601.080 8601.060 8601.080 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.600 8602.600 8602.600 8602.600 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.060 8602.080 8602.060 8602.080 514 520 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 Cable clamp rails 2 pc(s). 4191.000 4191.000 4191.000 4191.000 665 C rails 30/15 6 pc(s). 4944.000 4944.000 4944.000 4944.000 612 Baying system from page from page from page from page 542 Section for cable entry, rear 1 set(s) 8802.065 8802.065 8802.065 8802.065 652 Adaptor sections, 482.6 mm (19") 2 pc(s). 8613.360 8613.360 8613.300 8613.300 684 LED system light 1 pc(s). 4140.830 4140.830 4140.830 4140.830 637 Compact light 1 pc(s). Lock systems Rittal Catalogue 34/Enclosures 4140.010 4140.010 4140.010 4140.010 636 from page from page from page from page 561 73 Baying systems TS 8 System accessories Page 507 Cable entry Page 650 Colour: – RAL 7035 Supply includes: – Enclosure frame with door – Roof plate – Base, solid – Rear panel – Mounting plate – 4 eyebolts – Lock: 3 mm double-bit F T Approvals: – UL – cUL Protection category IP to IEC 60 529: – IP 66 B G – Base: Sheet steel, 1.5 mm, dipcoat-primed, powdercoated on the outside, textured paint – Mounting plate: Sheet steel, 3 mm, zinc-plated H Material and surface finish: – Enclosure frame: Sheet steel, 1.5 mm, dipcoat-primed and powder-coated, textured paint – Roof: Sheet steel, 1.5 mm, dipcoat-primed and powdercoated, textured paint – Door: Sheet steel, 2 mm, dipcoat-primed and powdercoated, textured paint – Rear panel: Sheet steel, 1.5 mm, dipcoat-primed and powder-coated, textured paint Protection category NEMA: – NEMA 4 IP 66/NEMA 4 Width (B) mm Packs of 800 Height (H) mm 2000 Depth (T) mm 600 Mounting plate width (F) mm 699 Mounting plate height (G) mm 1896 Model No. Page 1 pc(s). 8806.580 Side panels, screw-fastened, sheet steel 2 pc(s). 8106.235 Quick-fit baying clamp, one-piece 6 pc(s). 8800.500 543 Baying clamp, horizontal 4 pc(s). 8800.400 543 535 Accessories 534 Baying frame IP 66/NEMA 4, NEMA 4X 1 pc(s). 8700.010 Angular baying bracket 4 pc(s). 8800.430 545 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.800 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.060 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.800 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.060 514 Cable clamp rails 2 pc(s). 4192.000 665 from page 605 4118.000 578 Rail systems Sheet steel wiring plan pockets 1 pc(s). Cable duct see page 664 System lights from page 634 Lock systems from page 561 74 Rittal Catalogue 34/Enclosures Baying systems TS 8 System accessories Page 507 ISV assembly modules Page 299 TS enclosure (WxD 600 x 400/600 mm) Page 62 Material and surface finish: – Enclosure frame: Sheet steel, 1.5 mm, dipcoat-primed – Roof: Sheet steel, 1.5 mm, dipcoat-primed, powdercoated on the outside, textured paint – Door: Sheet steel, 2 mm, dipcoat-primed, powdercoated on the outside, textured paint – Rear panel: Sheet steel, 1.5 mm, dipcoat-primed, powder-coated on the outside, textured paint – Gland plates: Sheet steel, 1.5 mm, zinc-plated Supply includes: – Enclosure frame with door(s) – Three-piece gland plates – Rear panel – Roof plate – 4 eyebolts – Lock: 3 mm double-bit Colour: – RAL 7035 Basis of test: – IEC 61 439-1/-2 Protection category IP to IEC 60 529: – IP 55 Protection category NEMA: – NEMA 12 Distribution enclosures Width mm Packs of Height mm Depth mm Model No. 1 pc(s). Door(s) Weight kg 850 850 1100 1100 2000 2000 2000 2000 400 600 400 600 9666.955 9666.915 9666.965 9666.925 1 1 2 2 111.0 117.0 146.0 156.0 9666.712 Page Also required Mounting angle 2 pc(s). 9666.712 9666.712 9666.712 Installation kit 1 pc(s). 9666.910 9666.910 9666.920 9666.920 Depth stay 2 pc(s). – – 9666.730 9666.730 Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8104.235 8106.235 8104.235 8106.235 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.850 8601.850 8601.300 8601.300 534 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.040 8601.060 8601.040 8601.060 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.850 8602.850 8602.100 8602.100 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.040 8602.060 8602.040 8602.060 514 520 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 Roof plates 1 pc(s). 9665.953 9665.913 9665.963 9665.923 583 see page see page see page see page 584 560 Cable entry glands Lock systems from page from page from page from page Angular baying bracket 4 pc(s). 8800.430 8800.430 8800.430 8800.430 545 Baying connector, external 6 pc(s). 8800.490 8800.490 8800.490 8800.490 544 Rittal Catalogue 34/Enclosures 75 Baying systems TS 8 System accessories Page 507 Installation accessories for TS modular front design Page 552 Compartment configuration Page 283 Material and surface finish: – Enclosure frame: Sheet steel, 1.5 mm, dipcoat-primed – Rear panel: Sheet steel, 1.5 mm, dipcoat-primed, powder-coated on the outside, textured paint – Gland plates: Sheet steel, 1.5 mm, zinc-plated Colour: – RAL 7035 Protection category IP to IEC 60 529: – Up to IP 54, depending on the panels Basis of test: – IEC 61 439-1/-2 – IEC 61 641 Technical details: Available on the Internet Supply includes: – Enclosure frame – Rear panel – Three-piece gland plates Modular enclosures, height 2000 mm Width mm Packs of Height mm Depth mm Model No. 1 pc(s). Weight kg 400 600 800 400 600 800 2000 2000 2000 2000 2000 2000 600 600 600 800 800 800 9670.406 9670.606 9670.806 9670.408 9670.608 9670.808 43.8 51.0 61.0 46.0 53.7 64.2 Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8106.235 8106.235 8106.235 8108.235 8108.235 8108.235 534 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 8100.000 8100.000 8100.000 511 Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.400 8100.600 8100.800 8100.400 8100.600 8100.800 511 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.600 8100.600 8100.600 8100.800 8100.800 8100.800 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 8200.000 8200.000 8200.000 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.400 8200.600 8200.800 8200.400 8200.600 8200.800 511 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.600 8200.600 8200.600 8200.800 8200.800 8200.800 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.400 8601.600 8601.800 8601.400 8601.600 8601.800 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.060 8601.060 8601.060 8601.080 8601.080 8601.080 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.400 8602.600 8602.800 8602.400 8602.600 8602.800 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.060 8602.060 8602.060 8602.080 8602.080 8602.080 514 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 4612.000 4612.000 520 Angular baying bracket 4 pc(s). 8800.430 8800.430 8800.430 8800.430 8800.430 8800.430 545 Baying connector, external 6 pc(s). 8800.490 8800.490 8800.490 8800.490 8800.490 8800.490 544 Roof plates see page see page see page see page see page see page 583 Partial doors see page see page see page see page see page see page 552 Front trim panels, top see page see page see page see page see page see page 553 Front trim panels, bottom see page see page see page see page see page see page 553 76 Rittal Catalogue 34/Enclosures Baying systems TS 8 Modular enclosures, height 2200 mm Width mm Packs of Height mm Depth mm Model No. 1 pc(s). Weight kg 400 600 800 400 600 800 2200 2200 2200 2200 2200 2200 600 600 600 800 800 800 9670.426 9670.626 9670.826 9670.428 9670.628 9670.828 43.2 54.0 59.4 46.1 55.8 66.0 Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8126.235 8126.235 8126.235 8128.235 8128.235 8128.235 534 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 8100.000 8100.000 8100.000 511 Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.400 8100.600 8100.800 8100.400 8100.600 8100.800 511 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.600 8100.600 8100.600 8100.800 8100.800 8100.800 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 8200.000 8200.000 8200.000 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.400 8200.600 8200.800 8200.400 8200.600 8200.800 511 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.600 8200.600 8200.600 8200.800 8200.800 8200.800 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.400 8601.600 8601.800 8601.400 8601.600 8601.800 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.060 8601.060 8601.060 8601.080 8601.080 8601.080 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.400 8602.600 8602.800 8602.400 8602.600 8602.800 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.060 8602.060 8602.060 8602.080 8602.080 8602.080 514 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 4612.000 4612.000 520 Angular baying bracket 4 pc(s). 8800.430 8800.430 8800.430 8800.430 8800.430 8800.430 545 Baying connector, external 6 pc(s). 8800.490 8800.490 8800.490 8800.490 8800.490 544 see page see page see page see page see page see page 583 Partial doors see page see page see page see page see page see page 552 Front trim panels, top see page see page see page see page see page see page 553 Front trim panels, bottom see page see page see page see page see page see page 553 Accessories 8800.490 Roof plates Rittal Catalogue 34/Enclosures Drawer see page 554 77 Baying systems TS 8 System accessories Page 507 Compartment configuration Page 283 Material and surface finish: – Enclosure frame: Sheet steel, 1.5 mm, dipcoat-primed – Roof: Sheet steel, 1.5 mm, dipcoat-primed, powdercoated on the outside, textured paint – Door: Sheet steel, 2 mm, dipcoat-primed, powdercoated on the outside, textured paint – Rear panel: Sheet steel, 1.5 mm, dipcoat-primed, powder-coated on the outside, textured paint – Gland plates: Sheet steel, 1.5 mm, zinc-plated – Punched section without mounting flange: Sheet steel, zinc-plated Supply includes: – Enclosure frame with r/h door hinge, left side open – Roof – Rear panel – Three-piece gland plates – Punched sections without mounting flanges 23 x 73 mm for enclosure height – Lock: 3 mm double-bit Colour: – RAL 7035 Basis of test: – IEC 61 439-1/-2 – IEC 61 641 Protection category IP to IEC 60 529: – Up to IP 3X, depending on the panels Technical details: Available on the Internet Fuse-switch-disconnector enclosures Width mm Packs of Height mm Depth mm Model No. 1 pc(s). Weight kg 1000 1200 1200 2000 2000 2000 600 600 800 9670.006 9670.106 9670.108 97.0 116.0 123.0 Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8106.235 8106.235 8108.235 534 Flex-Block corner pieces, 100 mm 1 set(s) 8100.000 8100.000 8100.000 511 Flex-Block trim panels, 100 mm, sealed, for width 1 set(s) 8100.010 8100.120 8100.120 511 Flex-Block trim panels, 100 mm, sealed, for depth 1 set(s) 8100.600 8100.600 8100.800 511 Flex-Block corner pieces, 200 mm 1 set(s) 8200.000 8200.000 8200.000 511 Flex-Block trim panels, 200 mm, sealed, for width 1 set(s) 8200.010 8200.120 8200.120 511 Flex-Block trim panels, 200 mm, sealed, for depth 1 set(s) 8200.600 8200.600 8200.800 511 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.000 8601.200 8601.200 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.060 8601.060 8601.080 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.000 8602.200 8602.200 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.060 8602.060 8602.080 514 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 520 Angular baying bracket 4 pc(s). 8800.430 8800.430 8800.430 545 Baying connector, external 6 pc(s). 8800.490 8800.490 8800.490 544 Front trim panels 1 set(s) 9674.340 9674.340 9674.340 290 Contact hazard protection cover plate 1 set(s) 9674.362 9674.366 – 291 Divider panel 1 pc(s). 9674.306 9674.306 9674.308 291 Roof plates 1 pc(s). 9660.255 9660.265 9659.555 583 78 Rittal Catalogue 34/Enclosures Baying systems TS 8 System accessories Page 507 Base/plinth Page 512 Compartment configuration Page 283 Material and surface finish: – Enclosure frame: Sheet steel, 1.5 mm, dipcoat-primed – Roof: Sheet steel, 1.5 mm, dipcoat-primed, powdercoated on the outside, textured paint – Front trim panel: Sheet steel, 1.5 mm, dipcoat-primed, powder-coated on the outside, textured paint – Rear panel: Sheet steel, 1.5 mm, dipcoat-primed, powder-coated on the outside, textured paint – Gland plate: Sheet steel, 1.5 mm, dipcoat-primed, powder-coated on the outside, textured paint Supply includes: – Enclosure frame – Front trim panel – Roof – Rear panel – Gland plate Colour: – RAL 7035 Basis of test: – IEC 61 439-1/-2 – IEC 61 641 Protection category IP to IEC 60 529: – IP 55 Technical details: Available on the Internet Note: – The busbar enclosure is on one base/plinth together with the main enclosure, i.e. please select a base/plinth for the main enclosure which is 200 mm wider. Busbar enclosures Width mm Packs of Height mm Depth mm Model No. 1 pc(s). Weight kg 200 200 200 2000 2200 2000 600 600 800 9670.206 9670.226 9670.208 34.0 36.6 37.5 Page Accessories Side panels, screw-fastened, sheet steel 2 pc(s). 8106.235 8126.235 8108.235 Angular baying bracket 4 pc(s). 8800.430 8800.430 8800.430 545 Baying connector, external 6 pc(s). 8800.490 8800.490 8800.490 544 Coupling set mounting kit 1 set(s) 9674.196 9674.196 9674.198 288 Rittal Catalogue 34/Enclosures 534 79 Baying systems TS 8 System accessories Page 507 Baying systems TS 8 Page 62 Baying system TS 8, stainless steel Page 182 The large enclosures in the TS 8 series offer a good level of shielding across a broad frequency range, even in the standard version. For increased EMC requirements, Rittal offers the TS 8 enclosure in a version certified by the VDE with high RF attenuation. Material: – Enclosure frame: Sheet steel with aluminium zinc coating, 1.5 mm – Roof: Sheet steel with aluminium zinc coating, 1.5 mm – Door: Sheet steel with aluminium zinc coating, 2.0 mm – Rear panel: Sheet steel with aluminium zinc coating, 1.5 mm – Gland plates: Sheet steel, 1.5 mm – Mounting plate: Sheet steel 3.0 mm Surface finish: – Enclosure frame: Uncoated – Door, rear panel and roof: Spray-finished on the outside and paint-free on the inside – Gland plates: Zinc-plated – Mounting plate: Zinc-plated Colour: – RAL 7035 Supply includes: – Enclosure frame with door – Rear panel and roof plate detachable – Gland plates, divided – Door hinged on the right, may be swapped to the left – Mounting plate – 4 eyebolts Note: – For bayed enclosures, the EMC baying seal is required Approvals: – VDE EMC enclosures Width mm Packs of Height mm Depth mm Model No. 1 pc(s). 800 800 2000 2000 600 800 8806.750 8808.750 Page Accessories EMC side panels 2 pc(s). 8106.750 8108.750 640 EMC baying seal 1 pc(s). 8800.690 8800.690 640 EMC divider panel seal 1 pc(s). Base/plinth Rail for EMC shielding bracket and strain relief 1 pc(s). EMC shielding bracket EMC shield bus 4348.000 4348.000 640 from page from page 510 2388.800 2388.800 641 see page see page 641 see page see page 642 8800.680 8800.680 641 EMC earth clamps see page see page 642 EMC cable glands see page see page 642 Baying system from page from page 542 Cable duct for vertical TS section see page see page 663 EMC gland plates 1 set(s) Cable duct see page see page 673 Snap-on nut TS see page see page 618 Rail systems from page from page 605 System lights from page from page 634 Earth straps see page see page 644 Earthing strap see page see page 644 Lock systems from page from page 561 80 Rittal Catalogue 34/Enclosures System enclosures SE 8 System accessories Page 184 SE 8 stainless steel Page 185 Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 55 Protection category NEMA: – NEMA 12 F T B G Material and surface finish: – Enclosure: Sheet steel, 1.5 mm, dipcoat-primed, powder-coated on the outside, textured paint – Door: Sheet steel, 2 mm, dipcoat-primed, powdercoated on the outside, textured paint – Rear panel: Sheet steel, 1.5 mm, dipcoat-primed, powder-coated on the outside, textured paint Supply includes: – Enclosure, solid top and sides – Door(s) – R/h door hinge with single-door enclosures, may be swapped to opposite side – Mounting plate – Gland plates – Rear panel, detachable – Lock: 3 mm double-bit – Mounting plate: Sheet steel, 3 mm, zinc-plated – Gland plates: Sheet steel, 1.5 mm, zinc-plated H Free-standing enclosure system based on the TS 8 platform. System accessories for TS 8 interior installation can be used without restriction. Approvals: – UL – cUL Technical details: Available on the Internet Width 600 – 800 mm Width (B) mm 600 800 800 800 800 Height (H) mm Packs of 1800 1800 2000 2000 2000 Depth (T) mm 400 400 400 500 600 Mounting plate width (F) mm 499 699 699 699 699 Mounting plate height (G) mm 1696 1696 1896 1896 1896 5830.500 5831.500 5832.500 5833.500 5834.500 1 1 1 1 1 ◾ ◾ ◾ ◾ ◾ 99.0 118.0 131.0 134.0 142.0 Model No. 1 pc(s). Door(s) Rear panel, one-piece Weight kg Page Accessories Base/plinth from page from page from page from page from page Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 4612.000 520 Eyebolts 4 pc(s). 4568.000 4568.000 4568.000 4568.000 4568.000 586 605 Rail systems 510 from page from page from page from page from page TS punched section with mounting flange, 23 x 73 mm 4 pc(s). 8612.560 8612.580 8612.580 8612.550 8612.560 607 Cable entry plates 2 pc(s). 8800.060 8800.080 8800.080 8800.080 8800.080 650 Section for cable entry, rear 1 set(s) 8802.065 8802.085 8802.085 8802.085 8802.085 652 Cable clamp rails 2 pc(s). 4191.000 4192.000 4192.000 4192.000 4192.000 665 C rails 30/15 6 pc(s). 4944.000 4945.000 4945.000 4945.000 4945.000 612 578 Sheet steel wiring plan pockets see page see page see page see page see page 180° hinges see page see page see page see page see page 574 System lights from page from page from page from page from page 634 Earth straps see page see page see page see page see page 644 TS punched section without mounting flange, 45 x 88 mm 2 pc(s). 8612.660 8612.680 8612.680 see page see page 608 TS punched rail 25 x 38 mm 2 pc(s). 8612.760 8612.780 8612.780 see page see page 608 see page see page see page see page see page 609 TS punched rail 18 x 38 mm Door stay for escape routes Lock systems Rittal Catalogue 34/Enclosures 1 pc(s). 4583.500 4583.500 4583.500 4583.500 4583.500 578 from page from page from page from page from page 561 81 System enclosures SE 8 Width 1000 – 1800 mm Width (B) mm 1000 1200 1200 1200 1200 1600 1800 Height (H) mm Packs of 1800 1800 2000 2000 2000 1800 2000 Depth (T) mm 400 400 400 500 600 400 500 Mounting plate width (F) mm 899 1099 1099 1099 1099 1499 1699 Mounting plate height (G) mm Model No. 1 pc(s). Door(s) 1696 1696 1896 1896 1896 1696 1896 5840.500 5841.500 5843.500 5844.500 5845.500 5842.500 5846.500 2 Page 2 2 2 2 2 2 Rear panel, one-piece ◾ ◾ ◾ ◾ ◾ – – Rear panel, two-piece – – – – – ◾ ◾ 145.0 175.0 193.0 195.0 210.0 222.0 273.0 from page from page from page from page from page from page from page 510 4612.000 4612.000 4612.000 4612.000 4612.000 4612.000 4612.000 520 586 Weight kg Accessories Base/plinth Levelling feet 4 pc(s). Eyebolts 4 pc(s). Rail systems 4568.000 4568.000 4568.000 4568.000 4568.000 4568.000 4568.000 from page from page from page from page from page from page from page 605 – 8612.550 607 650 TS punched section with mounting flange, 23 x 73 mm 4 pc(s). 8612.500 8612.520 8612.520 see page see page Cable entry plates 4 pc(s). 8800.100 8800.120 8800.120 8800.120 8800.120 – – Section for cable entry, rear 2 set(s) 8802.105 8802.125 8802.125 8802.125 8802.125 8802.165 – 652 Cable clamp rails 2 pc(s). 4336.000 4196.000 4196.000 4196.000 4196.000 4338.000 4339.000 665 C rails 30/15 6 pc(s). 4946.000 4947.000 4947.000 4947.000 4947.000 – – 612 Sheet steel wiring plan pockets 1 pc(s). see page see page see page see page see page see page 4123.000 578 180° hinges see page see page see page see page see page see page see page 574 System lights from page from page from page from page from page from page from page 634 Earth straps see page see page see page see page see page see page see page 644 608 TS punched section without mounting flange, 45 x 88 mm 2 pc(s). – – – 8612.650 8612.660 – 8612.650 TS punched rail 25 x 38 mm 2 pc(s). – – – 8612.750 8612.760 – 8612.750 608 TS punched rail 18 x 38 mm 4 pc(s). 8612.240 8612.240 8612.240 8612.250 8612.260 8612.240 8612.250 609 Door stay for escape routes 1 pc(s). Lock systems 4583.500 4583.500 4583.500 4583.500 4583.500 4583.500 4583.500 578 from page from page from page from page from page from page from page 561 Perforex New see page 488 82 Rittal Catalogue 34/Enclosures System enclosures SE 8 System accessories Page 507 SE 8 stainless steel Page 185 Material and surface finish: – Enclosure: Sheet steel, 1.5 mm, dipcoat-primed, powder-coated on the outside, textured paint – Door: Sheet steel, 2 mm, dipcoat-primed, powder-coated on the outside, textured paint – Rear panel: Sheet steel, 1.5 mm, dipcoat-primed, powder-coated on the outside, textured paint Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 66 Protection category NEMA: – NEMA 4 Supply includes: – Enclosure, solid top and sides – Door(s) – Door hinged on the right, may be swapped to the left – Mounting plate – Base, solid – Rear panel – Lock: 3 mm double-bit F T B G – Mounting plate: Sheet steel, 3 mm, zinc-plated – Base: Sheet steel, 1.5 mm, dipcoat-primed and powdercoated, textured paint H The system enclosure is based on the TS 8 platform. System accessories for interior installation in the TS 8 design can be used without restrictions. Approvals: – UL – cUL Technical details: Available on the Internet IP 66/NEMA 4 Width (B) mm 600 800 800 Height (H) mm 1800 1800 2000 Depth (T) mm 400 400 600 Mounting plate width (F) mm 499 699 699 Mounting plate height (G) mm 1696 1696 1896 5830.580 5831.580 5834.580 1 1 1 Model No. Packs of 1 pc(s). Door(s) Page Accessories Base/plinth components, front and rear, 100 mm 1 set(s) 8601.600 8601.800 8601.800 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.040 8601.040 8601.060 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.600 8602.800 8602.800 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.040 8602.040 8602.060 514 Eyebolts 4 pc(s). 4568.000 4568.000 4568.000 586 605 Rail systems 513 from page from page from page TS punched section with mounting flange, 23 x 73 mm 4 pc(s). 8612.560 8612.580 see page 607 Cable entry plates 2 pc(s). 8800.060 8800.080 8800.080 650 Section for cable entry, rear 1 set(s) 8802.065 8802.085 8802.085 652 Cable clamp rails 2 pc(s). 4191.000 4192.000 4192.000 665 C rails 30/15 6 pc(s). 4944.000 4945.000 see page 612 Sheet steel wiring plan pockets see page see page see page 578 180° hinges see page see page see page 574 System lights from page from page from page 634 Earth straps see page see page see page 644 see page 608 TS punched section without mounting flange, 45 x 88 mm 2 pc(s). 8612.660 8612.680 TS punched rail 25 x 38 mm 2 pc(s). 8612.760 8612.780 see page 608 see page see page see page 609 TS punched rail 18 x 38 mm Door stay for escape routes Lock systems Rittal Catalogue 34/Enclosures 1 pc(s). 4583.500 4583.500 4583.500 578 from page from page from page 561 83 84 Rittal Catalogue 34/Enclosures IT enclosure systems/housings Network/server enclosures TS-IT TS-IT with vented door for room climate control ...........................................90 TS-IT with glazed door for rack climate control .............................................92 TS-IT with glazed door for rack climate control, pre-configured ....................94 TS-IT with glazed door for rack climate control, IP 55 ...................................95 Distributor racks Data Rack ....................................................................................................96 IT enclosures VerticalBox ...................................................................................................97 FlatBox with 482.6 mm (19˝) mounting angles...............................................98 FlatBox with 482.6 mm (19˝) mounting frame ................................................99 Wall-mounted enclosure EL, 3-part, pre-configured with mounting angles ..........................................................100 Wall-mounted enclosure EL, 3-part, pre-configured with punched rails and mounting angles .............................101 Wall-mounted enclosure EL, 3-part, with mounting plate and mounting angles...................................................102 Wall-mounted enclosures AE with 482.6 mm (19˝) mounting angles............104 Small fibre-optic distributor with mounting plate and splicing cassette accommodation ........................................................105 Rittal Catalogue 34/Enclosures 85 Network/server enclosures TS-IT 86 Rittal Catalogue 34/Enclosures Fast and secure ◾ Fast: Loosen the 482.6 mm (19˝) quickrelease fastener, slide into the correct position with infinite adjustment, and latch ◾ Secure: Maximum load capacity up to 15,000 N Convenience in perfection ◾ Interior installation – Side offset and alternative mounting dimensions are easily achieved ◾ Distance between levels – directly identified, thanks to integral pitch pattern ◾ U labelling – front and rear, legible on both sides from the front Convincing door concept ◾ Glazed or vented door ◾ Doors with 180° hinges and comfort handle prepared for individual locks ◾ Divided rear door for space-optimised positioning ◾ Optimised air throughput ~ 85% perforated open surface area Multi-functional roof ◾ Brush strips for cable entry across the entire enclosure depth ◾ Cable clamping directly behind the brush strip ◾ Fan mounting plate or spacer for active and passive climate control Rittal Catalogue 34/Enclosures 87 Network/server enclosures TS-IT 88 Rittal Catalogue 34/Enclosures Tool-free installation ◾ Tool-free installation of all slide rails, component shelves, telescopic slides and much more ◾ Simply locate into the rear mounting angle, extend to the required size, and secure at the front Quick-assembly side panel ◾ Divided side panel for simple one-person assembly ◾ Locate side panel at the top, slot in at the bottom, snap shut – and it’s done, no screw-fastening required ◾ Quick-release fasteners with integral lock, additionally with internal latch for enhanced security Built-in added value ◾ Prepared for Dynamic Rack Control or cable management ◾ Ready to use for space-saving, clip-on mounting of the Rittal PDU busbar; on both sides in the zero-U space between the mounting angle and side panel Ingenious climate control concept ◾ Fully suitable for rack/suite and room cooling ◾ Variable termination at the sides with all-round brush strip ◾ 6 U mounting space additionally integrated into the compartmentalisation Rittal Catalogue 34/Enclosures 89 Network/server enclosures TS-IT IT power Page 387 System accessories Page 507 Monitoring Page 445 Climate control Page 307 Material: – Sheet steel Surface finish: – Enclosure frame: Dipcoatprimed – Interior installation: Primed – Doors and roof: Dipcoatprimed, powder coated Colour: – Enclosure frame and panels: RAL 7035 – Interior installation: RAL 9005 Load capacity of the 482.6 mm (19") mounting angles: – 15000 N Supply includes: – TS 8 enclosure frame with doors and roof plate Please note the product-specific scope of supply. Approvals: – UL – cUL Technical details: Available on the Internet Note: – Depending on the siting type and location, the door opening may vary for selected applications with vented door for room climate control Units U 24 42 42 42 42 Width mm 800 600 600 800 800 Height mm 1200 2000 2000 2000 2000 Depth mm 1000 1000 1200 1000 1200 Distance between levels, pre-configured mm 745 745 745 745 745 1 pc(s). 5504.110 5508.110 5510.110 5509.110 5511.110 Sheet steel door at the front, vented (vented surface area approx. 85% perforated), 180° hinges 1 pc(s). ◾ ◾ ◾ ◾ ◾ Sheet steel door at the rear, vented (vented surface area approx. 85% perforated), 180° hinges 1 pc(s). ◾ – – – – Lock front and rear: Comfort handle for semi-cylinders and security lock 3524 E 1 pc(s). ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ Model No. Packs of Page Product-specific scope of supply Two 482.6 mm (19") mounting sections front and rear, variably mounted on support strips with quick-release fasteners Roof plate, multi-piece, removable, with side cable entry in the depth and covered cut-out for fan mounting plate 1 pc(s). ◾ ◾ ◾ ◾ ◾ Spacers to raise the fan cover plate, for passive cooling (supplied loose) 4 pc(s). ◾ ◾ ◾ ◾ ◾ Potential equalisation with earthing point (supplied loose) 1 set(s) ◾ ◾ ◾ ◾ ◾ Multi-tooth screws M5, cage nuts M5, conductive (supplied loose) 50 pc(s). ◾ ◾ ◾ ◾ ◾ Sheet steel door at the rear, vertically divided, vented (vented surface area approx. 85% perforated), 180° hinges 1 pc(s). – ◾ ◾ ◾ ◾ Accessories Side panels, divided 1 pc(s). – 5501.030 5501.040 5501.030 5501.040 536 Side panel, lockable 2 pc(s). 7824.120 7824.200 – 7824.200 – 536 Base mount 2 pc(s). 5501.320 5501.320 5501.350 5501.320 5501.350 524 Gland plates 1 set(s) 5502.550 5502.540 5502.560 5502.550 5502.570 528 510 Base/plinth from page from page from page from page from page Fan mounting plates 1 pc(s). 5502.020 5502.010 5502.010 5502.020 5502.020 437 Air baffle plates 1 set(s) – 5501.805 5501.805 5501.815 5501.815 692 Cable route 1 pc(s). – 5502.120 5502.120 5502.120 5502.120 672 Cable duct 1 pc(s). – 5502.105 5502.105 5502.105 5502.105 673 Component shelves from page from page from page from page from page 627 Slide rails from page from page from page from page from page 687 90 Rittal Catalogue 34/Enclosures Network/server enclosures TS-IT with vented door for room climate control Units U 47 47 47 47 Width mm 600 600 800 800 Height mm 2200 2200 2200 2200 Depth mm 1000 1200 1000 1200 Distance between levels, pre-configured mm 745 745 745 745 1 pc(s). 5513.110 5515.110 5514.110 5516.110 Sheet steel door at the front, vented (vented surface area approx. 85% perforated), 180° hinges 1 pc(s). ◾ ◾ ◾ ◾ Sheet steel door at the rear, vertically divided, vented (vented surface area approx. 85% perforated), 180° hinges 1 pc(s). ◾ ◾ ◾ ◾ Lock front and rear: Comfort handle for semi-cylinders and security lock 3524 E 1 pc(s). ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ Model No. Packs of Page Product-specific scope of supply Two 482.6 mm (19") mounting sections front and rear, variably mounted on support strips with quick-release fasteners Roof plate, multi-piece, removable, with side cable entry in the depth and covered cut-out for fan mounting plate 1 pc(s). ◾ ◾ ◾ ◾ Spacers to raise the fan cover plate, for passive cooling (supplied loose) 4 pc(s). ◾ ◾ ◾ ◾ 1 set(s) ◾ ◾ ◾ ◾ 50 pc(s). ◾ ◾ ◾ ◾ Potential equalisation with earthing point (supplied loose) Multi-tooth screws M5, cage nuts M5, conductive (supplied loose) Accessories Side panels, divided 1 pc(s). 5501.060 5501.070 5501.060 5501.070 536 Side panel, lockable 2 pc(s). 7824.220 – 7824.220 – 536 Base mount 2 pc(s). 5501.320 5501.350 5501.320 5501.350 524 Gland plates 1 set(s) 5502.540 5502.560 5502.550 5502.570 528 510 Base/plinth from page from page from page from page Fan mounting plates 1 pc(s). 5502.010 5502.010 5502.020 5502.020 437 Air baffle plates 1 set(s) 5501.825 5501.825 5501.835 5501.835 692 Cable route 1 pc(s). 5502.120 5502.120 5502.120 5502.120 672 Cable duct 1 pc(s). 5502.145 5502.145 5502.145 5502.145 673 Component shelves from page from page from page from page 627 Slide rails from page from page from page from page 687 PDU – Power Distribution Unit New see page 416 Rittal Catalogue 34/Enclosures 91 Network/server enclosures TS-IT IT power Page 387 System accessories Page 507 Monitoring Page 445 Climate control Page 307 Material: – Sheet steel – Glazed door: Single-pane safety glass, 3 mm Colour: – Enclosure frame and panels: RAL 7035 – Interior installation: RAL 9005 Surface finish: – Enclosure frame: Dipcoatprimed – Interior installation: Primed – Doors and roof: Dipcoatprimed, powder coated Load capacity of the 482.6 mm (19") mounting angles: – 15000 N Note: – Depending on the siting type and location, the door opening may vary for selected applications Approvals: – UL – cUL Technical details: Available on the Internet Supply includes: – TS 8 enclosure frame with doors and roof plate Please note the product-specific scope of supply. with glazed door for rack climate control Units U 24 24 38 42 42 Width mm 800 800 800 600 600 Height mm 1200 1200 1800 2000 2000 Depth mm 800 1000 800 1000 1200 Distance between levels, pre-configured mm 545 745 545 745 745 1 pc(s). 5503.120 5504.120 5505.120 5508.120 5510.120 Glazed aluminium door at the front, 180° hinges 1 pc(s). ◾ ◾ ◾ ◾ ◾ Sheet steel door at the rear, 180° hinges 1 pc(s). ◾ ◾ – – – Lock front and rear: Comfort handle for semi-cylinders and security lock 3524 E 1 pc(s). ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ Model No. Packs of Page Product-specific scope of supply Two 482.6 mm (19") mounting sections front and rear, variably mounted on support strips with quick-release fasteners Roof plate, multi-piece, removable, with side cable entry in the depth and covered cut-out for fan mounting plate 1 pc(s). ◾ ◾ ◾ ◾ ◾ Spacers to raise the fan cover plate, for passive cooling (supplied loose) 4 pc(s). ◾ ◾ ◾ ◾ ◾ Potential equalisation with earthing point (supplied loose) 1 set(s) ◾ ◾ ◾ ◾ ◾ Multi-tooth screws M5, cage nuts M5, conductive (supplied loose) 50 pc(s). ◾ ◾ ◾ ◾ ◾ Sheet steel door at the rear, vertically divided, 180° hinges 1 pc(s). – – ◾ ◾ ◾ Accessories Side panels, divided 1 pc(s). – – 5501.000 5501.030 5501.040 536 Side panel, lockable 2 pc(s). 7824.128 7824.120 7824.188 7824.200 – 536 Base mount 2 pc(s). 5501.310 5501.320 5501.310 5501.320 5501.350 524 Gland plates 1 set(s) 5502.530 5502.550 5502.530 5502.540 5502.560 528 from page from page from page from page from page 510 Base/plinth Fan mounting plates 1 pc(s). 5502.020 5502.020 5502.020 5502.010 5502.010 437 Air baffle plates 1 set(s) – – – 5501.805 5501.805 692 Cable route 1 pc(s). – – – 5502.120 5502.120 672 Cable duct 1 pc(s). – – – 5502.105 5502.105 673 Component shelves from page from page from page from page from page 627 Slide rails from page from page from page from page from page 687 92 Rittal Catalogue 34/Enclosures Network/server enclosures TS-IT with glazed door for rack climate control Units U 42 42 42 42 47 Width mm 800 800 800 800 800 Height mm 2000 2000 2000 2000 2200 Depth mm 600 800 1000 1200 800 Distance between levels, pre-configured mm 545 545 745 745 745 1 pc(s). 5506.120 5507.120 5509.120 5511.120 5512.120 Glazed aluminium door at the front, 180° hinges 1 pc(s). ◾ ◾ ◾ ◾ ◾ Sheet steel door at the rear, vertically divided, 180° hinges 1 pc(s). ◾ ◾ ◾ ◾ ◾ Lock front and rear: Comfort handle for semi-cylinders and security lock 3524 E 1 pc(s). ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ Model No. Packs of Page Product-specific scope of supply Two 482.6 mm (19") mounting sections front and rear, variably mounted on support strips with quick-release fasteners Roof plate, multi-piece, removable, for horizontal cable entry at the rear and covered cut-out for fan mounting plate 1 pc(s). ◾ – – – – Spacers to raise the fan cover plate, for passive cooling (supplied loose) 4 pc(s). ◾ ◾ ◾ ◾ ◾ Potential equalisation with earthing point (supplied loose) 1 set(s) ◾ ◾ ◾ ◾ ◾ Multi-tooth screws M5, cage nuts M5, conductive (supplied loose) 50 pc(s). ◾ ◾ ◾ ◾ ◾ Roof plate, multi-piece, removable, with side cable entry in the depth and covered cut-out for fan mounting plate 1 pc(s). – ◾ ◾ ◾ ◾ Accessories Side panels, divided 1 pc(s). 5501.010 5501.020 5501.030 5501.040 5501.050 Side panel, lockable 2 pc(s). 7824.206 7824.208 7824.200 – 7824.228 536 Base mount 2 pc(s). 5501.300 5501.310 5501.320 5501.350 5501.310 524 Gland plates 1 set(s) Base/plinth 536 5502.510 5502.530 5502.550 5502.570 5502.530 528 from page from page from page from page from page 510 Fan mounting plates 1 pc(s). 5502.010 5502.020 5502.020 5502.020 5502.020 437 Air baffle plates 1 set(s) 5501.815 5501.815 5501.815 5501.815 5501.835 692 Cable route 1 pc(s). 5502.120 5502.120 5502.120 5502.120 5502.120 672 Cable duct 1 pc(s). 5502.105 5502.105 5502.105 5502.105 5502.145 673 Component shelves from page from page from page from page from page 627 Slide rails from page from page from page from page from page 687 LCP – Liquid Cooling Package New see page 429 Rittal Catalogue 34/Enclosures 93 Network/server enclosures TS-IT IT power Page 387 System accessories Page 507 Monitoring Page 445 Climate control Page 307 Material: – Sheet steel – Glazed door: Single-pane safety glass, 3 mm Surface finish: – Enclosure frame: Dipcoatprimed – Interior installation: Primed – Doors and roof: Dipcoatprimed, powder coated Colour: – Enclosure frame and panels: RAL 7035 – Interior installation: RAL 9005 Load capacity of the 482.6 mm (19") mounting angles: – 15000 N Supply includes: – TS 8 enclosure frame with doors and roof plate Please note the product-specific scope of supply. Note: – Depending on the siting type and location, the door opening may vary for selected applications Technical details: Available on the Internet with glazed door for rack climate control, pre-configured Units U Packs of 42 Width mm 800 Height mm 2100 Depth mm 800 Distance between levels, pre-configured mm Model No. Page 545 1 pc(s). 5507.150 Glazed aluminium door at the front, 180° hinges 1 pc(s). ◾ Sheet steel door at the rear, vertically divided, 180° hinges 1 pc(s). ◾ Lock front and rear: Comfort handle for semi-cylinders and security lock 3524 E 1 pc(s). ◾ Product-specific scope of supply Two 482.6 mm (19") mounting sections front and rear, variably mounted on support strips with quick-release fasteners ◾ Roof plate, multi-piece, removable, with side cable entry in the depth and covered cut-out for fan mounting plate 1 pc(s). ◾ Spacers to raise the fan cover plate, for passive cooling (supplied loose) 4 pc(s). ◾ Potential equalisation incl. central earthing point, pre-configured 1 set(s) ◾ Multi-tooth screws M5, cage nuts M5, conductive (supplied loose) 50 pc(s). ◾ Base mount 1 pc(s). ◾ Base module mounted at front as infill panel 1 pc(s). ◾ Flex-Block base/plinth 100 mm, vented 1 set(s) ◾ Side panels, one-piece, lockable 2 pc(s). ◾ Levelling feet incl. base/plinth adaptor sleeve (supplied loose) 1 set(s) ◾ Accessories Gland plates 1 set(s) 5502.530 529 Fan mounting plates 1 pc(s). 5502.020 437 Air baffle plates 1 set(s) 5501.815 692 Cable route 1 pc(s). 5502.120 672 Cable duct 1 pc(s). 5502.105 673 Component shelves from page 627 Slide rails from page 687 94 Rittal Catalogue 34/Enclosures Network/server enclosures TS-IT IT power Page 387 System accessories Page 507 Monitoring Page 445 Climate control Page 307 Material: – Sheet steel – Glazed aluminium door with 3 mm single-pane safety glass Colour: – Enclosure frame and panels: RAL 7035 – Interior installation: RAL 9005 Surface finish: – Enclosure frame: Dipcoatprimed – Interior installation: Primed – Doors and roof: Dipcoatprimed, powder coated Protection category IP to IEC 60 529: – IP 55 Load capacity of the 482.6 mm (19") mounting angles: – 15000 N Supply includes: – TS 8 enclosure frame with doors and roof plate Please note the product-specific scope of supply. Approvals: – UL – cUL Technical details: Available on the Internet Note: – Depending on the siting type and location, the door opening may vary for selected applications with glazed door for rack climate control, IP 55 Units U 42 42 47 Width mm 800 800 800 Height mm 2000 2000 2200 Depth mm 800 1000 1000 Distance between levels, pre-configured mm 545 745 745 1 pc(s). 5507.130 5509.130 5514.130 Glazed aluminium door at the front, 180° hinges 1 pc(s). ◾ ◾ ◾ Sheet steel door at the rear, 180° hinges 1 pc(s). ◾ ◾ ◾ Lock front and rear: Comfort handle for semi-cylinders and security lock 3524 E 1 pc(s). ◾ ◾ ◾ Base tray and gland plate, multi-piece, solid 1 pc(s). ◾ ◾ ◾ Roof plate, one-piece, solid 1 pc(s). ◾ ◾ ◾ ◾ ◾ ◾ Model No. Packs of Page Product-specific scope of supply Two 482.6 mm (19") mounting sections front and rear, variably mounted on support strips with quick-release fasteners Potential equalisation with earthing point (supplied loose) 1 pc(s). ◾ ◾ ◾ Multi-tooth screws M5, cage nuts M5, conductive (supplied loose) 50 pc(s). ◾ ◾ ◾ Baying seal and sealing kit for gland plates (supplied loose) 1 pc(s). ◾ ◾ ◾ Accessories Side panels, screw-fastened, sheet steel 2 pc(s). Base/plinth 8108.235 8100.235 – 534 from page from page from page 510 Air baffle plates 1 set(s) 5501.815 5501.815 5501.835 692 Cable route 1 pc(s). 5502.120 5502.120 5502.120 672 Component shelves, depth-variable see page see page see page 630 Component shelves, pull-out see page see page see page 630 5502.105 5502.105 5502.145 673 Cable duct 1 pc(s). Slide rails, static installation 2 pc(s). 5501.400 5501.400 5501.400 687 Slide rails, depth-variable 2 pc(s). 5501.460 5501.480 5501.480 687 Rail systems from page from page from page 602 Cable management from page from page from page 663 PDU international from page from page from page 416 Rittal Catalogue 34/Enclosures 95 Distributor racks 482.6 mm (19") installation system Page 678 Monitoring Page 445 Power System Module Page 409 Accessories for Data Rack Page 682 Colour: – Profile frame, base/plinth: RAL 7035 – Trim panel, feet: RAL 5018 Load capacity: – Max. 150 kg, static/level Supply includes: – Torsionally stiff profile frame with 482.6 mm (19") punchings – Stable base/plinth with integral feet, with the option of floor anchoring without base trim panels – Levelling feet – Assembly parts Technical details: Available on the Internet Photo shows a configuration example with equipment not included in the scope of supply H Material: – Profile frame, base/plinth: Sheet steel – Feet: Die-cast zinc Note: – Order second mounting level separately B T2 T1 Data Rack Units U 31 36 40 45 Width (B) mm Packs of 550 550 550 550 Height (H) mm 1499.5 1721.8 1899.5 2121.8 Depth (T1) mm 750 750 750 750 150 - 350 150 - 350 150 - 350 150 - 350 7391.000 7396.000 7400.000 7445.000 Distance from the second mounting level, 50 mm pitch pattern (T2) mm Model No. 1 pc(s). Page Accessories Second pair of mounting angles 1 pc(s). 7296.000 7297.000 7298.000 7299.000 682 Twin castors 1 set(s) 7495.000 7495.000 7495.000 7495.000 522 see page see page see page see page 631 1 pc(s). 5502.105 5502.105 5502.105 5502.145 673 6 pc(s). 7016.100 7016.100 7016.100 7016.100 677 6 pc(s). 7016.110 7016.110 7016.110 7016.110 677 see page see page see page see page 687 Component shelf 2 U, static installation Cable duct Cable routing across the 482.6 mm (19") mounting level Slide rails Baying connector 3 pc(s). 7494.000 7494.000 7494.000 7494.000 682 Depth stays 2 pc(s). 7401.000 7401.000 7401.000 7401.000 682 Continuous slide rail 2 pc(s). 7402.000 7402.000 7402.000 7402.000 682 Keyboard drawer 2 U 1 pc(s). 7281.035 7281.035 7281.035 7281.035 712 96 Rittal Catalogue 34/Enclosures VerticalBox System accessories Page 507 Compact 482.6 mm (19") enclosure for small networks. Benefits: – May be used as wall-mounted, under-desk or desktop enclosure – Free access from three sides for interior installation – Passive ventilation with vent slots – Rear panel prepared to accommodate a fan – Freely selectable door hinging Units U Material: – Sheet steel – Viewing window: Single-pane safety glass, 3 mm Surface finish: – Powder-coated Colour: – RAL 7035 Packs of Supply includes: – Enclosure with glazed door – Side panels (1 x fixed, 1 x slot-in) with vent slots – Knockouts for cable entry via roof or base – Slot-in rear panel with knockouts for cable entry and fan accommodation – 482.6 mm (19") mounting level, 5 U, horizontal front and rear, depth-variable, distance between levels 434 – 489 mm – Security lock 12321 on the door, side and rear panel – 4 plastic feet, self-adhesive 5 Width mm 300 Height mm 540 Depth mm Model No. Technical details: Available on the Internet Page 600 1 pc(s). 7501.000 1 pc(s). 7072.200 657 see page 587 Accessories Brush strip Wall mounting bracket Fan expansion kit 1 set(s) 7980.100 438 Socket strips 1 pc(s). 7240.220 422 Blanking panel, 482.6 mm (19") 2 pc(s). 7151.035 696 Cable management panel see page 674 Cable entry panel see page 677 Rittal Catalogue 34/Enclosures 97 FlatBox System accessories Page 507 For flexible use as a wall-mounted or floor-standing enclosure. Benefits: – Tool-free quick assembly – System assembly on the open 482.6 mm (19") frame Material: – Sheet steel – Viewing window: Single-pane safety glass, 3 mm Surface finish: – Powder-coated Colour: – RAL 7035 Supply includes: – Flat-packed enclosure – 1 wall section – 2 basic supports – 2 roof/base plates, with cutouts for cable entry via brush strips – 2 side panels, lockable – 1 glazed door, lockable, security lock 3524 E, door hinge point selectable – Connection components for tool-free, fast assembly – Earthing kit for system-compatible earthing of all enclosure parts Please note the product-specific scope of supply. Note: – Max. installation depth: Depth – 112 mm – Max. distance between two 482.6 mm (19") levels: Depth – 126 mm Technical details: Available on the Internet Photo shows a configuration example with equipment not included in the scope of supply Design with 482.6 mm (19") mounting angles Units U 6 6 9 9 Width mm 600 600 600 600 Height mm 358 358 492 492 Depth mm 400 600 400 600 1 pc(s). 7507.000 7507.100 7507.010 7507.110 2 pc(s). ◾ ◾ ◾ ◾ Model No. Packs of Page Product-specific scope of supply 482.6 mm (19") mounting angles Accessories Mounting angles, 482.6 mm (19") 2 pc(s). 7507.706 7507.706 7507.709 7507.709 686 Levelling feet 4 pc(s). 7507.740 7507.740 7507.740 7507.740 520 Cover plates for fan panels 6 pc(s). 7507.760 7507.760 7507.760 7507.760 440 Earth rail, horizontal 1 pc(s). 7113.000 7113.000 7113.000 7113.000 646 Cable clamp, variable see page see page see page see page 669 Fan expansion kit see page see page see page see page 438 379 Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 3110.000 3110.000 Cable management panel 1 pc(s). 5502.205 5502.205 5502.205 5502.205 674 Component shelf 2 U, static installation 1 pc(s). 7119.250 see page 7119.250 see page 631 Component shelves, pull-out 1 set(s) – 5501.675 – 5501.675 630 98 Rittal Catalogue 34/Enclosures FlatBox Design with 482.6 mm (19") mounting frame Units U 12 12 15 15 18 21 Width mm 600 600 600 700 700 700 Height mm 625 625 758 758 892 1025 Depth mm 400 600 400 700 700 700 1 pc(s). 7507.020 7507.120 7507.030 7507.200 7507.210 7507.220 482.6 mm (19") mounting frame 1 pc(s). ◾ ◾ ◾ ◾ ◾ ◾ Levelling feet 4 pc(s). ◾ ◾ ◾ ◾ ◾ ◾ Model No. Packs of Page Product-specific scope of supply Accessories Mounting angles, 482.6 mm (19") 2 pc(s). 7507.712 7507.712 7507.715 7507.715 7507.718 7507.721 Levelling feet 4 pc(s). 7507.740 7507.740 7507.740 7507.740 7507.740 7507.740 686 520 Cover plates for fan panels 6 pc(s). 7507.760 7507.760 7507.760 7507.760 7507.760 7507.760 440 Earth rail, horizontal 1 pc(s). 7113.000 7113.000 7113.000 7113.000 7113.000 7113.000 646 Cable clamp, variable see page see page see page see page see page see page 669 Fan expansion kit see page see page see page see page see page see page 438 379 1 pc(s). 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 Cable management panel 1 pc(s). 5502.205 5502.205 5502.205 5502.205 5502.205 5502.205 674 Component shelf 2 U, static installation 1 pc(s). 7119.250 see page 7119.250 see page see page see page 631 Component shelves, pull-out 1 set(s) – 5501.675 – 5501.675 5501.675 5501.675 630 Accessories Enclosure internal thermostat Rittal Catalogue 34/Enclosures Socket strips see from page 422 99 Wall-mounted enclosures EL, 3-part System accessories Page 507 Socket strips Page 422 Wall mounting bracket Page 587 Cable clamps Page 666 Surface finish: – Powder-coated Supply includes: – Wall section – Hinged part with 25 mm pitch pattern of holes in the front and rear frame – Designer glazed door Please note the product-specific scope of supply. Note: – Protection category IP 54 in conjunction with solid gland plate, top and bottom – Enclosure 673 mm deep with reinforced wall mounting bracket T1 T3 T2 B1 H1 Material: – Wall and hinged part: Sheet steel, 1.5 mm – Viewing window: Single-pane safety glass, 3 mm Colour: – Wall and hinged part: RAL 7035 – Glazed door: RAL 7035/7015 (slate grey) T4 Approvals: – UL – cUL H2 Wall-mounted enclosure with optimum accessibility due to hinged part. B2 Technical details: Available on the Internet pre-configured with mounting angles, depth-variable Units U 9 9 15 15 21 21 Width (B1) mm 600 600 600 600 600 600 Height (H1) mm 478 478 746 746 1012 1012 Depth (T1) mm 573 673 573 673 573 673 Clearance width (B2) mm 502 502 502 502 502 502 Clearance height (H2) mm 415 415 683 683 949 949 Depth of wall section (T2) mm 135 135 135 135 135 135 Depth of hinged part (T3) mm 416 516 416 516 416 516 Max. installation depth (T4) mm 520 620 520 620 520 620 Load capacity of hinged part (static) kg 45 45 75 75 75 75 7709.735 7709.535 7715.735 7715.535 7721.735 7721.535 Wall section: Gland plate, solid, top ◾ ◾ ◾ ◾ ◾ ◾ Wall section: Gland plate with brush strip, bottom ◾ ◾ ◾ ◾ ◾ ◾ Wall section: 2 vertical punched rails ◾ ◾ ◾ ◾ ◾ ◾ Wall section: C rail mounted horizontally for cable clamping ◾ ◾ ◾ ◾ ◾ ◾ Hinged part with two 482.6 mm (19") mounting angles, fully depth adjustable ◾ ◾ ◾ ◾ ◾ ◾ Hinged part: Side outlet filters left and right ◾ ◾ ◾ ◾ ◾ ◾ Earth rail with star earthing ◾ ◾ ◾ ◾ ◾ ◾ 4 wall mounting brackets 10 mm ◾ ◾ ◾ ◾ ◾ ◾ Mini-comfort handle ◾ ◾ ◾ ◾ – – Security lock 3524 E ◾ ◾ ◾ ◾ ◾ ◾ Comfort handle and 2-point locking – – – – ◾ ◾ Model No. Packs of 1 pc(s). Page Product-specific scope of supply Accessories Gland plate for metric cable glands 1 pc(s). 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 656 Fan expansion kit 1 set(s) 7980.100 7980.100 7980.100 7980.100 7980.100 7980.100 438 Spare filter mats 5 pc(s). 3322.700 3322.700 3322.700 3322.700 3322.700 3322.700 371 see page – see page – see page – 587 Wall mounting bracket Component shelf 2 U, static installation 1 pc(s). 7119.250 see page 7119.250 see page 7119.250 see page 631 Cable management panel 1 pc(s). 7257.200 7257.200 7257.200 7257.200 7257.200 7257.200 674 100 Rittal Catalogue 34/Enclosures Wall-mounted enclosures EL, 3-part System accessories Page 507 Socket strips Page 422 Wall mounting bracket Page 587 Earthing Page 644 Protection category IP to IEC 60 529: – IP 55 Supply includes: – Wall section – Hinged part with 25 mm pitch pattern of holes in the front and rear frame – Designer glazed door Please note the product-specific scope of supply. T1 T3 B1 T4 Approvals: – UL – cUL Surface finish: – Powder-coated T2 H1 Material: – Wall and hinged part: Sheet steel, 1.5 mm – Viewing window: Single-pane safety glass, 3 mm Colour: – Wall and hinged part: RAL 7035 – Glazed door: RAL 7035/7015 (slate grey) H2 Wall-mounted enclosure with optimum accessibility due to hinged part. B2 Technical details: Available on the Internet with punched rails and mounting angles, depth-variable Units U 6 9 12 15 21 Width (B1) mm 600 600 600 600 600 Height (H1) mm 345 478 612 746 1012 Depth (T1) mm 473 473 473 473 473 Clearance width (B2) mm 502 502 502 502 502 Clearance height (H2) mm 282 415 549 683 949 Depth of wall section (T2) mm 135 135 135 135 135 Depth of hinged part (T3) mm 316 316 316 316 316 Max. installation depth (T4) mm 420 420 420 420 420 Load capacity of hinged part (static) kg 30 45 60 75 75 7706.135 7709.135 7712.135 7715.135 7721.135 Wall section: Gland plate, solid, top and bottom ◾ ◾ ◾ ◾ ◾ Wall section: 2 vertical punched rails ◾ ◾ ◾ ◾ ◾ Wall section: C rail mounted horizontally for cable clamping ◾ ◾ ◾ ◾ ◾ Hinged part with two 482.6 mm (19") mounting angles, fully depth adjustable ◾ ◾ ◾ ◾ ◾ 4 wall mounting brackets 10 mm ◾ ◾ ◾ ◾ ◾ Mini-comfort handle ◾ ◾ ◾ ◾ – Security lock 3524 E ◾ ◾ ◾ ◾ ◾ Comfort handle and 2-point locking – – – – ◾ Model No. Packs of 1 pc(s). Page Product-specific scope of supply Accessories Gland plate with brush insert 1 pc(s). 7705.035 7705.035 7705.035 7705.035 7705.035 657 Gland plate for metric cable glands 1 pc(s). 7705.235 7705.235 7705.235 7705.235 7705.235 656 see page see page see page see page see page 587 1 pc(s). 7113.000 7113.000 7113.000 7113.000 7113.000 646 Wall mounting bracket Earth rail, horizontal Component shelf 2 U, static installation 1 pc(s). 7119.250 7119.250 7119.250 7119.250 7119.250 631 Cable management panel 1 pc(s). 7257.200 7257.200 7257.200 7257.200 7257.200 674 from page from page from page from page from page 560 Lock systems Rittal Catalogue 34/Enclosures 101 Wall-mounted enclosures EL, 3-part System accessories Page 507 Socket strips Page 422 Wall mounting bracket Page 587 Cable clamps Page 666 B1 T4 Approvals: – UL – cUL Surface finish: – Powder-coated B3 T2 T1 T3 B2 Technical details: Available on the Internet with mounting plate and mounting angles, static installation Units U 3 3 6 6 9 9 12 Width (B1) mm 600 600 600 600 600 600 600 Height (H1) mm 212 212 345 345 478 478 612 Depth (T1) mm 373 473 373 473 373 473 373 Clearance width (B2) mm 502 502 502 502 502 502 502 Clearance height (H2) mm 149 149 282 282 415 415 549 Depth of wall section (T2) mm 135 135 135 135 135 135 135 Depth of hinged part (T3) mm 216 316 216 316 216 316 216 Max. installation depth (T4) mm 320 420 320 420 320 420 320 Mounting plate width (B3) mm 485 485 485 485 485 485 485 Mounting plate height (H3) mm 165 165 299 299 432 432 565 Load capacity of hinged part (static) kg 15 15 30 30 45 45 60 2243.605 2253.605 2246.605 2256.605 2249.605 2259.605 2252.605 Wall section: Gland plate, solid, top and bottom ◾ ◾ ◾ ◾ ◾ ◾ ◾ Wall section: Mounting plate supplied loose ◾ ◾ ◾ ◾ ◾ ◾ ◾ Hinged part with two 482.6 mm (19") mounting angles ◾ ◾ ◾ ◾ ◾ ◾ ◾ Mini-comfort handle ◾ ◾ ◾ ◾ ◾ ◾ ◾ Security lock 3524 E ◾ ◾ ◾ ◾ ◾ ◾ ◾ Model No. Packs of 1 pc(s). Page Product-specific scope of supply Accessories Gland plate with brush insert 1 pc(s). 7705.035 7705.035 7705.035 7705.035 7705.035 7705.035 7705.035 Gland plate for metric cable glands 1 pc(s). 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 7705.235 656 see page see page see page see page see page see page see page 587 from page from page from page from page from page from page from page 658 – 7119.250 – 7119.250 – 7119.250 – 631 – – see page see page see page see page see page 692 from page from page from page from page from page from page from page 560 Wall mounting bracket Cable glands Component shelf 2 U, static installation Blanking plates, 482.6 mm (19") Lock systems 102 1 pc(s). 657 Rittal Catalogue 34/Enclosures H3 Protection category IP to IEC 60 529: – IP 55 Supply includes: – Wall section – Hinged part with 25 mm pitch pattern of holes in the front and rear frame – Designer glazed door Please note the product-specific scope of supply. H1 Material: – Wall and hinged part: Sheet steel, 1.5 mm – Viewing window: Single-pane safety glass, 3 mm Colour: – Wall and hinged part: RAL 7035 – Glazed door: RAL 7035/7015 (slate grey) H2 Wall-mounted enclosure with optimum accessibility due to hinged part. Wall-mounted enclosures EL, 3-part with mounting plate and mounting angles, static installation Units U 12 15 15 21 21 Width (B1) mm 600 600 600 600 600 Height (H1) mm 612 746 746 1012 1012 Depth (T1) mm 473 373 473 373 473 Clearance width (B2) mm 502 502 502 502 502 Clearance height (H2) mm 549 683 683 949 949 Depth of wall section (T2) mm 135 135 135 135 135 Depth of hinged part (T3) mm 316 216 316 216 316 Max. installation depth (T4) mm 420 320 420 320 420 Mounting plate width (B3) mm 485 485 485 485 485 Mounting plate height (H3) mm 565 699 699 965 965 Load capacity of hinged part (static) kg 60 75 75 75 75 2262.605 2255.605 2265.605 2261.605 2271.605 Wall section: Gland plate, solid, top and bottom ◾ ◾ ◾ ◾ ◾ Wall section: Mounting plate supplied loose ◾ ◾ ◾ ◾ ◾ Hinged part with two 482.6 mm (19") mounting angles ◾ ◾ ◾ ◾ ◾ Mini-comfort handle ◾ ◾ ◾ – – Security lock 3524 E ◾ ◾ ◾ ◾ ◾ Comfort handle and 2-point locking – – – ◾ ◾ Model No. Packs of 1 pc(s). Page Product-specific scope of supply Accessories Gland plate with brush insert 1 pc(s). 7705.035 7705.035 7705.035 7705.035 7705.035 657 Gland plate for metric cable glands 1 pc(s). 7705.235 7705.235 7705.235 7705.235 7705.235 656 Wall mounting bracket see page see page see page see page see page 587 Cable glands from page from page from page from page from page 658 7119.250 – 7119.250 – 7119.250 631 Blanking plates, 482.6 mm (19") see page see page see page see page see page 692 Lock systems from page from page from page from page from page 560 Accessories Component shelf 2 U, static installation Rittal Catalogue 34/Enclosures 1 pc(s). Energy-Box, 482.6 mm (19˝) see page 425 103 Wall-mounted enclosures AE System accessories Page 507 Socket strips Page 422 Cage nuts Page 624 Glazed doors Page 556 Wall-mounted enclosure for small networks with a high protection category. Material: – Enclosure: Sheet steel Surface finish: – Enclosure: Powder-coated – Mounting angles: Zinc-plated Colour: – RAL 7035 Protection category IP to IEC 60 529: – Up to IP 66 (depending on the selected gland pate) Supply includes: – Enclosure with hinged door – Door hinged on the right, may be swapped to the left – Cam lock with 3 mm double-bit insert – Gland plate with brush strip for cable entry in the enclosure base – Mounting angles, 482.6 mm (19"), fully depth adjustable – C rail, for cable clamping on the rear panel – Metal bracket for optional accommodation of an earth rail or 482.6 mm (19") socket strip Approvals: – UL – CSA – TÜV – Germanischer Lloyd – Lloyds Register of Shipping – VDE Technical details: Available on the Internet with 482.6 mm (19") mounting angles, depth-variable Units U 8 13 16 Width mm Packs of 600 600 600 Height mm 380 600 760 Depth mm 350 350 350 Max. installation depth mm 310 310 310 1 2 2 7641.000 7643.000 7645.000 Gland plate, size 5 5 5 Gland plates, qty. 1 1 1 Wall mounting bracket see page see page see page Viewing window see page see page see page 556 7119.250 7119.250 7119.250 631 Cam locks Model No. 1 pc(s). Page Accessories Component shelf 2 U, static installation 1 pc(s). Earth rail, horizontal 1 pc(s). Lock systems 104 587 7113.000 7113.000 7113.000 646 from page from page from page 560 Rittal Catalogue 34/Enclosures Small fibre-optic distributors System accessories Page 507 Protection category IP to IEC 60 529: – IP 66 Technical details: Available on the Internet 17 0 14 5 T 244 Colour: – RAL 7035 Supply includes: – Enclosure with knockouts for cable glands – Hinged cover with seal – 2 cover screws, prepared for a lead seal – Insulating bungs for wall mounting – Mounting plate – Dividing plate – 12 cable glands PG 7 – 1 cable gland PG 16 169.5 Material: – Enclosure with cover: Fibreglass-reinforced polycarbonate – Cover screws: Polyamide – Insulating bungs: Polyamide – Foamed-in PU seal H Benefits: – Mounting plate with variable accommodation for up to two splicing cassettes (cassette width variable from 92 to 120 mm) and integral anti-twist guard – Dividing plate with comb strip for cable clamping, to cover the splicing cassette, and to accommodate 2 patch panels – Cable entry via prepunched knockouts using cable glands (2 x 22.5 mm and 12 x 12.5 mm) B with mounting plate and splicing cassette accommodation Width (B) mm Packs of 180 Height (H) mm 254 Depth (T) mm 90 Maximum number of fibres (when using patch panels) Model No. Page 24 1 pc(s). 7451.000 see page 698 1 pack(s) 9583.000 27 Accessories Patch panels for small fibre-optic distributors Wall mounting brackets Rittal Catalogue 34/Enclosures 105 106 Rittal Catalogue 34/Enclosures Console systems/ PC enclosure systems/ Industrial Workstations TopConsole system TP Overview of mounting components.............................................................109 Combination options ..................................................................................110 600 mm wide .............................................................................................111 800 mm wide .............................................................................................112 1200 mm wide ...........................................................................................113 1600 mm wide ...........................................................................................114 Accessories ................................................................................................117 One-piece consoles TP One-piece consoles TP ..............................................................................115 Universal consoles TP Universal consoles TP.................................................................................116 PC enclosure systems PC enclosure systems ................................................................................118 Enclosure for tower PC...............................................................................119 Industrial Workstations Combination options ..................................................................................120 IW enclosures and worktops.......................................................................121 Rittal Catalogue 34/Enclosures 107 3 4 2 4 4 1 1 1 1 5 4 5 6 5 108 Rittal Catalogue 34/Enclosures TopConsole system TP Overview of mounting components TS punched section with mounting flange, 17 x 73 mm Support strips Partial mounting plates Rail for interior installation Gland plates Cable entry grommets 2 Rittal Catalogue 34/Enclosures 109 TopConsole system TP System accessories Page 507 Monitors, keyboards From page 706/707 Climate control Page 307 Surface finish: – Enclosure, cover and door: Dipcoat-primed, powdercoated on the outside, textured paint – Mounting plate: Zinc-plated Colour: – RAL 7035 Protection category IP to IEC 60 529 – IP 55 provided gland plates are selected Desk section – Enclosure – Hinged lid, 2 stays with automatic latching, automatic unlatching on the left and manual unlatching on the right – Opening for cable entry into the enclosure base B H Supply includes: Console – Enclosure – Cover hinged at bottom, including cover retainer – Open base for individual cable entry Pedestal – Enclosure open at top – Door or double door with locking rod (with depth 400 mm at the front, with depth 500 mm at the front and rear) – Depth-adjustable mounting plate (with depth 500 mm) – Open base for individual cable entry H NEMA protection category: – NEMA 12 provided suitable gland plates are selected T H Material: – Enclosure: Sheet steel 1.5 mm – Door and console cover: Sheet steel, 2.0 mm, all-round foamed-in PU seal – Mounting plate: Sheet steel 2.5 mm (depth 500 mm), 3.0 mm (depth 400 mm) Also required: Gland plates, see page 525 T Approvals: – CE – UL – cUL T Technical details: Available on the Internet Photo shows a configuration example with equipment not included in the scope of supply Combination options 1-part 2-part 3-part Consoles Desk sections Pedestals Base/plinth 110 Rittal Catalogue 34/Enclosures TopConsole system TP 600 mm wide Configuration 3-part Depth of pedestal in mm 2-part 400 500 1-part 400 500 400 500 Consoles 700 mm high Height (H) mm Packs of 700 – – 240 – – 1 pc(s). 6720.500 – – Depth (T) mm Model No. Page Accessories Partial mounting plates, locatable into rails Width 200 mm 1 pc(s). 6730.310 – – 597 Width 500 mm 1 pc(s). 6730.330 – – 597 Rails for interior installation For width 4 pc(s). 5001.050 – – 605 Packs of 235 235 – Page 700 700 – 1 pc(s). 6714.500 6710.500 – 4 pc(s). 5001.050 5001.050 1 pc(s). – – Desk sections Height (H) mm Depth (T) mm Model No. Accessories Rails for interior installation For width Trim panel – 605 5001.130 – 117 Page Pedestals Packs of Height (H) mm 675 675 675 675 675 675 400 500 400 500 400 500 1 pc(s). 6700.500 6704.500 6700.500 6704.500 6700.500 6704.500 Height 100 mm 1 set(s) 8601.600 8601.600 8601.600 8601.600 8601.600 8601.600 513 Height 200 mm 1 set(s) 8602.600 8602.600 8602.600 8602.600 8602.600 8602.600 513 Height 100 mm 1 set(s) 8601.040 8601.050 8601.040 8601.050 8601.040 8601.050 514 Height 200 mm 1 set(s) 8602.040 8602.050 8602.040 8602.050 8602.040 8602.050 514 2 pc(s). 8601.450 8601.450 8601.450 8601.450 8601.450 8601.450 520 1 pc(s). 5001.222 – 5001.222 – 5001.222 – 525 1 pc(s). 5001.214 5001.214 5001.214 5001.214 5001.214 5001.214 525 + + + + + + 5001.218 5001.222 5001.218 5001.222 5001.218 5001.222 525 Depth (T) mm Model No. Accessories Base/plinth components front and rear Base/plinth trim panels, side Cross member 1-part Gland plates 2-part 1 pc(s). Individual For more gland plate variants, see page 532 Rails for interior installation For height 4 pc(s). 5001.050 5001.050 5001.050 5001.050 5001.050 5001.050 605 Punched section with mounting flange, 17 x 73 mm In the depth 4 pc(s). 8612.140 8612.150 8612.140 8612.150 8612.140 8612.150 606 Punched rail 18 x 38 mm In the depth 4 pc(s). 8612.240 8612.250 8612.240 8612.250 8612.240 8612.250 609 Support strips In the depth 20 pc(s). 4694.000 4695.000 4694.000 4695.000 4694.000 4695.000 609 Punched section with mounting flange, 17 x 73 mm For door 4 pc(s). 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 606 Support strips For door 20 pc(s). 4596.000 4596.000 4596.000 4596.000 4596.000 4596.000 609 Cable clamp rail 1 pc(s). 5001.080 5001.080 5001.080 5001.080 5001.080 5001.080 665 Sheet steel wiring plan pockets 1 pc(s). 4116.500 4116.500 4116.500 4116.500 4116.500 4116.500 578 TP aluminium strip 1 pc(s). 6731.120 6731.120 6731.120 6731.120 – – 117 Lock systems Rittal Catalogue 34/Enclosures from page 562 111 TopConsole system TP 800 mm wide Configuration 3-part Depth of pedestal in mm 2-part 400 500 1-part 400 500 400 500 Consoles 700 mm high Packs of 700 – – 240 – – 1 pc(s). 6721.500 – – Width 200 mm 1 pc(s). 6730.310 – – 597 Width 500 mm 1 pc(s). 6730.330 – – 597 Width 700 mm 1 pc(s). 6730.340 – – 597 For width 4 pc(s). 5001.051 – – 605 Packs of 235 235 – Page 700 700 – 1 pc(s). 6715.500 6711.500 – 4 pc(s). 5001.051 5001.051 1 pc(s). – – Height (H) mm Depth (T) mm Model No. Page Accessories Partial mounting plates, locatable into rails Rails for interior installation Desk sections Height (H) mm Depth (T) mm Model No. Accessories Rails for interior installation For width Trim panel – 605 5001.140 6730.110 117 675 675 Page Pedestals Packs of 675 400 500 400 500 400 500 1 pc(s). 6701.500 6705.500 6701.500 6705.500 6701.500 6705.500 Height 100 mm 1 set(s) 8601.800 8601.800 8601.800 8601.800 8601.800 8601.800 513 Height 200 mm 1 set(s) 8602.800 8602.800 8602.800 8602.800 8602.800 8602.800 513 Height 100 mm 1 set(s) 8601.040 8601.050 8601.040 8601.050 8601.040 8601.050 514 Height 200 mm 1 set(s) 8602.040 8602.050 8602.040 8602.050 8602.040 8602.050 514 2 pc(s). 8601.450 8601.450 8601.450 8601.450 8601.450 8601.450 520 1 pc(s). 5001.223 – 5001.223 – 5001.223 – 525 1 pc(s). 5001.215 5001.215 5001.215 5001.215 5001.215 5001.215 525 + + + + + + 5001.219 5001.223 5001.219 5001.223 5001.219 5001.223 525 Height (H) mm Depth (T) mm Model No. 675 675 675 Accessories Base/plinth components front and rear Base/plinth trim panels, side Cross member 1-part Gland plates 2-part 1 pc(s). Individual For more gland plate variants, see page 532 Rails for interior installation For height 4 pc(s). 5001.050 5001.050 5001.050 5001.050 5001.050 5001.050 605 Punched section with mounting flange, 17 x 73 mm In the depth 4 pc(s). 8612.140 8612.150 8612.140 8612.150 8612.140 8612.150 606 Punched rail 18 x 38 mm In the depth 4 pc(s). 8612.240 8612.250 8612.240 8612.250 8612.240 8612.250 609 In the depth 20 pc(s). 4694.000 4695.000 4694.000 4695.000 4694.000 4695.000 609 For door 20 pc(s). 4598.000 4598.000 4598.000 4598.000 4598.000 4598.000 609 Cable clamp rail 1 pc(s). 5001.081 5001.081 5001.081 5001.081 5001.081 5001.081 665 Sheet steel wiring plan pockets 1 pc(s). 4118.500 4118.500 4118.500 4118.500 4118.500 4118.500 578 TP aluminium strip 1 pc(s). 6731.120 6731.120 6731.120 6731.120 – – 117 Support strips Support strips Lock systems 112 from page 562 Rittal Catalogue 34/Enclosures TopConsole system TP 1200 mm wide Configuration 3-part Depth of pedestal in mm 2-part 400 500 1-part 400 500 400 500 Consoles 700 mm high Packs of 700 – – 240 – – 1 pc(s). 6722.500 – – Width 200 mm 1 pc(s). 6730.310 – – 597 Width 500 mm 1 pc(s). 6730.330 – – 597 Width 700 mm 1 pc(s). 6730.340 – – 597 For width 4 pc(s). 5001.053 – – 605 Packs of 235 235 – Page 700 700 – 1 pc(s). 6716.500 6712.500 – 4 pc(s). 5001.053 5001.053 1 pc(s). – – Height (H) mm Depth (T) mm Model No. Page Accessories Partial mounting plates, locatable into rails Rails for interior installation Desk sections Height (H) mm Depth (T) mm Model No. Accessories Rails for interior installation For width Trim panel – 605 5001.160 6730.120 117 675 675 Page Pedestals Packs of 675 400 500 400 500 400 500 1 pc(s). 6702.500 6706.500 6702.500 6706.500 6702.500 6706.500 Height 100 mm 1 set(s) 8601.200 8601.200 8601.200 8601.200 8601.200 8601.200 513 Height 200 mm 1 set(s) 8602.200 8602.200 8602.200 8602.200 8602.200 8602.200 513 Height 100 mm 1 set(s) 8601.040 8601.050 8601.040 8601.050 8601.040 8601.050 514 Height 200 mm 1 set(s) 8602.040 8602.050 8602.040 8602.050 8602.040 8602.050 514 2 pc(s). 8601.450 8601.450 8601.450 8601.450 8601.450 8601.450 520 1 pc(s). 5001.225 – 5001.225 – 5001.225 – 525 1 pc(s). 5001.217 5001.217 5001.217 5001.217 5001.217 5001.217 525 + + + + + + 5001.221 5001.225 5001.221 5001.225 5001.221 5001.225 525 Height (H) mm Depth (T) mm Model No. 675 675 675 Accessories Base/plinth components front and rear Base/plinth trim panels, side Cross member 1-part Gland plates1) 2-part 1 pc(s). Individual For more gland plate variants, see page 532 Rails for interior installation For height 4 pc(s). 5001.050 5001.050 5001.050 5001.050 5001.050 5001.050 605 Punched section with mounting flange, 17 x 73 mm In the depth 4 pc(s). 8612.140 8612.150 8612.140 8612.150 8612.140 8612.150 606 Punched rail 18 x 38 mm In the depth 4 pc(s). 8612.240 8612.250 8612.240 8612.250 8612.240 8612.250 609 20 pc(s). 4694.000 4695.000 4694.000 4695.000 4694.000 4695.000 609 Support strips In the depth Punched section with mounting flange, 17 x 73 mm For door 4 pc(s). 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 606 Support strips For door 20 pc(s). 4596.000 4596.000 4596.000 4596.000 4596.000 4596.000 609 Cable clamp rail 1 pc(s). 5001.083 5001.083 5001.083 5001.083 5001.083 5001.083 665 Sheet steel wiring plan pockets 1 pc(s). 4116.500 4116.500 4116.500 4116.500 4116.500 4116.500 578 TP aluminium strip 1 pc(s). 6731.120 6731.120 6731.120 6731.120 – – 117 Lock systems 1) from page 562 With the two-door pedestal, the base opening is divided in two, and 2 sets of gland plates are required. Rittal Catalogue 34/Enclosures 113 TopConsole system TP 1600 mm wide Configuration 3-part Depth of pedestal in mm 2-part 400 500 1-part 400 500 400 500 Consoles 700 mm high Packs of 700 – – 240 – – 1 pc(s). 6723.500 – – Width 200 mm 1 pc(s). 6730.310 – – 597 Width 500 mm 1 pc(s). 6730.330 – – 597 Width 700 mm 1 pc(s). 6730.340 – – 597 For width 4 pc(s). 5001.054 – – 605 Packs of 235 235 – Page 700 700 – 1 pc(s). 6717.500 6713.500 – 4 pc(s). 5001.054 5001.054 1 pc(s). – – Height (H) mm Depth (T) mm Model No. Page Accessories Partial mounting plates, locatable into rails Rails for interior installation Desk sections Height (H) mm Depth (T) mm Model No. Accessories Rails for interior installation For width Trim panel – 605 6730.030 6730.130 117 675 675 Page Pedestals Packs of 675 400 500 400 500 400 500 1 pc(s). 6703.500 6707.500 6703.500 6707.500 6703.500 6707.500 Height 100 mm 1 set(s) 8601.920 8601.920 8601.920 8601.920 8601.920 8601.920 513 Height 200 mm 1 set(s) 8602.920 8602.920 8602.920 8602.920 8602.920 8602.920 513 Height 100 mm 1 set(s) 8601.040 8601.050 8601.040 8601.050 8601.040 8601.050 514 Height 200 mm 1 set(s) 8602.040 8602.050 8602.040 8602.050 8602.040 8602.050 514 2 pc(s). 8601.450 8601.450 8601.450 8601.450 8601.450 8601.450 520 1 pc(s). 5001.236 – 5001.236 – 5001.236 – 525 1 pc(s). 5001.234 5001.234 5001.234 5001.234 5001.234 5001.234 525 + + + + + + 5001.235 5001.236 5001.235 5001.236 5001.235 5001.236 525 Height (H) mm Depth (T) mm Model No. 675 675 675 Accessories Base/plinth components front and rear Base/plinth trim panels, side Cross member 1-part Gland plates1) 2-part 1 pc(s). Individual For more gland plate variants, see page 532 Rails for interior installation For height 4 pc(s). 5001.050 5001.050 5001.050 5001.050 5001.050 5001.050 605 Punched section with mounting flange, 17 x 73 mm In the depth 4 pc(s). 8612.140 8612.150 8612.140 8612.150 8612.140 8612.150 606 Punched rail 18 x 38 mm In the depth 4 pc(s). 8612.240 8612.250 8612.240 8612.250 8612.240 8612.250 609 In the depth 20 pc(s). 4694.000 4695.000 4694.000 4695.000 4694.000 4695.000 609 Support strips For door 20 pc(s). 4598.000 4598.000 4598.000 4598.000 4598.000 4598.000 609 Cable clamp rail Width 800 mm Support strips 1 pc(s). 5001.081 5001.081 5001.081 5001.081 5001.081 5001.081 665 Sheet steel wiring plan pockets 1 pc(s). 4118.500 4118.500 4118.500 4118.500 4118.500 4118.500 578 TP aluminium strip 1 pc(s). 6731.120 6731.120 6731.120 6731.120 – – 117 Lock systems 1) from page 562 With the two-door pedestal, the base opening is divided in two, and 2 sets of gland plates are required. 114 Rittal Catalogue 34/Enclosures One-piece consoles TP System accessories Page 507 Monitors, keyboards Page 706/707 Climate control Page 307 One-piece consoles, stainless steel Page 186 Surface finish: – Enclosure, cover and door: Dipcoat-primed, powdercoated on the outside, textured paint – Mounting plate: Zinc-plated Colour: – RAL 7035 Protection category NEMA: – NEMA 12 with selection of the appropriate gland plates Supply includes: – Enclosure, solid back and sides – Door or double door at front, with locking rod – Mounting plate – Cover hinged at rear, 2 stays with automatic locking. Automatic unlocking on the left, manual unlocking on the right – Open base for individual cable entry Width (B) mm Packs of Note: – With the two-door variant, the base opening is divided in two, and two sets of gland plates are required. F B T2 G Protection category IP to IEC 60 529: – IP 55 with selection of the appropriate gland plates Approvals: – UL – cUL H Material: – Enclosure: Sheet steel 1.5 mm – Door and console cover: Sheet steel, 2.0 mm, all-round foamed-in PU seal – Mounting plate: Sheet steel 3.0 mm T1 Technical details: Available on the Internet 600 800 1000 1200 Height (H) mm 960 960 960 960 Depth, bottom (T1) mm 400 400 400 400 Depth, top (T2) mm 520 520 520 520 Mounting plate width (F) mm 530 730 930 1130 Mounting plate height (G) mm Model No. 1 pc(s). Door(s) 900 900 900 900 6746.500 6748.500 6740.500 6742.500 1 1 2 2 Page Accessories Base/plinth components, front and rear, 100 mm 1 set(s) 8601.600 8601.800 8601.000 8601.200 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.040 8601.040 8601.040 8601.040 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.600 8602.800 8602.000 8602.200 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.040 8602.040 8602.040 8602.040 514 Cross member 2 pc(s). 8601.450 8601.450 8601.450 8601.450 520 see page see page see page see page 525 see page 5001.051 see page see page 598 see page see page see page see page 606 609 Gland plates Rails for interior installation 4 pc(s). TS punched section with mounting flange, 17 x 73 mm 513 TS punched rail 18 x 38 mm 4 pc(s). 8612.240 8612.240 8612.240 8612.240 Cable clamp rails 1 pc(s). 5001.080 5001.081 5001.082 5001.083 665 Sheet steel wiring plan pockets 1 pc(s). 4116.500 4118.500 4115.500 4116.500 578 TP aluminium strip 1 pc(s). Lock systems Rittal Catalogue 34/Enclosures 6731.120 6731.120 6731.120 6731.120 117 from page from page from page from page 562 115 Universal consoles TP System accessories Page 507 Monitors, keyboards Page 706/707 Climate control Page 307 Colour: – RAL 7035 Design Protection category NEMA: – NEMA 12 Supply includes: – Enclosure with door(s) – Mounting plate – Gland plates Note: – For universal console with short front door: The drawer or desk section should be fitted in order to preserve the protection category. The keyboard drawer may be installed without a mounting plate. Packs of Approvals: – UL – CSA – TÜV – Germanischer Lloyd – Russian Maritime Register of Shipping – Lloyds Register of Shipping – VDE F B T2 G Surface finish: – Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint – Mounting plate and gland plates: Zinc-plated Protection category IP to IEC 60 529: – IP 55 H Material: – Enclosure, gland plates: Sheet steel 1.5 mm – Door: Sheet steel, 2.0 mm – Mounting plate: Sheet steel 3.0 mm Technical details: Available on the Internet T1 with short front door with tall front door Width (B) mm 600 600 Height (H) mm 1300 1300 Depth, bottom (T1) mm 500 500 417.5 417.5 Depth, top (T2) mm Mounting plate width (F) mm 499 499 Mounting plate height (G) mm 1196 1196 2694.500 2695.500 77.0 80.0 Model No. 1 pc(s). Weight kg Page Also required Drawer 1 pc(s). – – 4757.500 – 117 Desk section 1 pc(s). 2696.500 2696.500 – – 117 Accessories Base/plinth, complete see page see page 519 8601.450 8601.450 520 20 pc(s). 2325.000 2325.000 575 2 pc(s). 4191.000 4191.000 665 from page from page 562 Cross member 2 pc(s). Support strips Cable clamp rails Lock systems 116 Rittal Catalogue 34/Enclosures TopConsole system TP Accessories Trim panel for pedestal For covering the complete top opening when using the pedestal on its own. For pedestal Width mm Model No. Depth mm 600 5001.130 800 5001.140 400 Material: – Sheet steel 1200 1600 6730.030 Surface finish: – Textured paint 600 6730.100 Colour: – RAL 7035 1200 Protection category IP to IEC 60 529: – IP 55 NEMA protection category: – NEMA 12 TP aluminium strip For retrospective external mounting on: ◾ TP three-part/two-part ◾ TP one-piece console ◾ May be mounted on all enclosures/covers with 20 mm fold height (max. metal thickness 2 mm) Length: 1750 mm (Easily cut to length for other dimensions) Sufficient for desk sections and consoles: – 3 x width 600 mm – 2 x width 800 mm – 1 x width 1000 mm + 1 x width 600 mm – 1 x width 1200 mm – 1 x width 1600 mm Drawer for TP universal console For mouse and keyboard with a maximum width of 500 mm. A high level of protection is retained, even with the flap open. Material: – Sheet steel Surface finish: – Textured paint 800 5001.160 6730.110 500 6730.120 1600 6730.130 Supply includes: – Assembly parts Length mm Model No. 1750 6731.120 Material: – Aluminium strip: Extruded aluminium section – Cover caps: Plastic Surface finish: – Aluminium strip: Natural anodised Colour: – Cover caps: RAL 7035 Supply includes: – 1 aluminium section – 6 plastic cover caps – Drilling template – Assembly parts Height mm Model No. 200 4757.500 Accessories: – Standard double-bit lock insert may be exchanged for other 27 mm lock inserts, type A, see page 570 or plastic handle, type B, see page 569 Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 55 NEMA protection category: – NEMA 12 Supply includes: – Assembly parts Desk section For installing display and control components and a keyboard. Closed at the side and front. Trim panels for top and bottom. Material: – Sheet steel Surface finish: – Dipcoat-primed, powder-coated on the outside, textured paint Height mm Model No. 200 2696.500 Protection category IP to IEC 60 529: – IP 55 NEMA protection category: – NEMA 12 Supply includes: – Assembly parts Colour: – RAL 7035 Rittal Catalogue 34/Enclosures 117 PC enclosure systems System accessories Page 507 Monitors, keyboards Page 706/707 Climate control Page 307 PC enclosure system, stainless steel Page 187 Secure accommodation of all PC components, from monitors, to PCs, to keyboards. For ultimate ease of operation in a modern design. Perfect protection from humidity and dirt, temperature fluctuations and unauthorised access. Material: – Enclosure, door, mounting compartment, supports: Sheet steel – Handles, decorative trim panels: Plastic – Door trim panels: Aluminium – Viewing window: Single-pane safety glass Surface finish: – Enclosure and door: Dipcoatprimed, powder-coated on the outside, textured paint – Mounting compartment, support: Powder-coated Width mm Packs of Colour: – Enclosure, door, decorative trim panels, supports: RAL 7035 – Handle: Similar to RAL 9006 – Monitor field, central door section: RAL 7015 Protection category IP to IEC 60 529: – IP 55 Supply includes: – Enclosure, door, rear door Please note the product-specific scope of supply. Approvals: – UL – cUL Technical details: Available on the Internet Protection category NEMA: – NEMA 12 600 600 600 600 600 600 Height mm 1600 1600 1600 1600 1600 1600 Depth mm 636 636 636 636 636 836 Glazed door, top ◾ ◾ ◾ ◾ – ◾ Keyboard drawer ◾ – – ◾ ◾ ◾ Component shelf ◾ ◾ ◾ ◾ – ◾ Folding keyboard – ◾ – – – – Desk section – – ◾ – – – Mounting compartment, small – – – ◾ – – Mounting compartment, large – – – – ◾ – 5366.000 5366.100 5366.200 5366.300 5366.400 5368.000 Page Product-specific scope of supply Model No. 1 pc(s). Max. keyboard dimensions (WxHxD) mm 480 x 70 x 260 475 x 50 x 250 540 x 40 x 175 480 x 70 x 260 480 x 70 x 260 480 x 70 x 260 475 x 60 x 200 Accessories Base/plinth, stationary 1 pc(s). 8800.920 8800.920 8800.920 8800.920 8800.920 – 517 Base/plinth components, front and rear, 100 mm 1 set(s) 8601.600 8601.600 8601.600 8601.600 8601.600 8601.600 513 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.600 8602.600 8602.600 8602.600 8602.600 8602.600 513 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.060 8601.060 8601.060 8601.060 8601.060 8601.080 514 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.060 8602.060 8602.060 8602.060 8602.060 8602.080 514 Partial mounting plates 1 pc(s). 8614.675 8614.675 8614.675 8614.675 8614.675 8614.675 596 627 Component shelf, pull-out 1 pc(s). 6902.960 6902.960 6902.960 6902.960 6902.960 6902.980 Drawer tray 1 pc(s). 6902.700 6902.700 6902.700 6902.700 6902.700 6902.700 628 Paper removal flap 1 pc(s). 6903.200 6903.200 6903.200 6903.200 6903.200 6903.200 713 Socket strips in an aluminium duct see page see page see page see page see page see page 422 Lock systems from page from page from page from page from page from page 562 118 Rittal Catalogue 34/Enclosures PC enclosure systems System accessories Page 507 Comfort Panel Page 124 Optipanel Page 126 TFT monitor Page 706 Compact enclosure, ready to connect. Standard commercially available tower PCs, up to W/H/ D: 250 x 530 x 600 mm (max. 20 kg) may be attached securely to the base screw fastened to the door using the retaining strap supplied loose. The rear interfaces of the PC are readily accessible with the door open. Because the socket strip and fan-and-filter unit are already pre-installed, the enclosure is ready for immediate use. Material: – Enclosure: Sheet steel – Door: Sheet steel – Design strips: Aluminium Protection category IP to IEC 60 529: – IP 54 in conjunction with connector gland supplied loose Surface finish: – Enclosure: Powder-coated, textured paint – Door: Powder-coated Protection category NEMA: – NEMA 12 in conjunction with connector gland supplied loose Colour: – Enclosure: RAL 7035 – Door: RAL 7015 – Design strips: RAL 7035 Roof prepared for mounting ◾ worktop ◾ beneath surfaces Base prepared for mounting ◾ cast feet ◾ on surfaces Supply includes: – Enclosure of all-round solid construction – R/h door hinge – Door with base screw-fastened on the inside – Side cam lock – Rear panel with two cut-outs for use of the connector gland supplied loose – Cable gland M20, brass, nickelplated – Outlet filter fitted in left side panel – Fan-and-filter unit fitted in right side panel – Door-operated switch, supply socket for 230 V power supply, socket strip with 3 sockets and overvoltage protection Please note the product-specific scope of supply. Enclosure for tower PC Width mm Packs of Height mm Page 760 Depth mm Model No. 760 300 1 pc(s). Weight kg 6900.300 55.0 Also required Connection cable 5 pc(s). 4315.100 639 Accessories Cast feet 2 pc(s). 6902.920 519 Twin castors 1 set(s) 7495.000 522 Worktop 1 pc(s). 6902.310 165 Optipanel 1 pc(s). 6380.040 126 TFT monitor 1 pc(s). 6450.020 706 TopTherm fan-and-filter units from page 316 Lock systems from page 561 Rittal Catalogue 34/Enclosures 119 Industrial Workstations System accessories Page 507 Comfort Panel Page 124 Optipanel Page 126 TFT monitor Page 706 Surface finish: – Enclosure: Dipcoat-primed, powder-coated on the outside, textured paint H Colour: – Enclosure, worktop: RAL 7035 – Worktop edge strip: RAL 7015 – Worktop handle: RAL 9006 H Material: – Enclosure, roof, drawer tray, designer door, rear wall and rear door: Sheet steel – Worktop: Chipboard, plastic-laminated on both sides (edging) – Handle: Aluminium, powdercoated Protection category: – See table B Supply includes: Available on the Internet B T T Photo shows a configuration example with equipment not included in the scope of supply Technical details: Available on the Internet Combination options 21˝ monitor housing Model No. 6902.500 Optipanel Custom-manufactured for TFT monitors or other display and input units Support arm system CP 60 Worktop Small, solid Model No. 6902.300 Worktop Solid Model No. 6902.100 Worktop Prepared for tilting enclosure attachment Model No. 6902.310, see page 165. Designer door, rear panel screw-fastened from the inside Height 900 mm Model No. 6900.000 Designer door, rear door Drawer section, designer door, Height 900 mm rear door Model No. 6900.100 Height 900 mm Model No. 6900.400 Drawer section for keyboard and mouse, designer door, rear door Height 900 mm Model No. 6900.410 Worktop, keyboard drawer, designer door, rear door Height 1000 mm Model No. 6901.100 Pedestal Model No. 6141.200 Base/plinth, stationary Model No. 8800.920 Twin castors Model No. 7495.000 120 Twin castors Model No. 7495.000 or 6148.000 Rittal Catalogue 34/Enclosures Industrial Workstations IW enclosures and worktops Enclosure Page Designer door, rear panel screw-fastened from the inside Designer door, rear door Drawer section, designer door, rear door Drawer section for keyboard and mouse, designer door, rear door Width (B) mm 600 600 600 600 600 Height (H) mm 900 900 900 900 1000 645 Version Worktop, keyboard drawer, designer door, rear door Depth (T) mm 600 600 600 (890) 600 (890) Weight (kg) 54.9 59.9 73 73 91 Model No. 6900.000 6900.100 6900.400 6900.410 6901.100 Protection category IP to IEC 60 529 Protection category NEMA Width (B) Height (H) Depth (T) mm mm mm IP 55 IP 54 NEMA 12 NEMA 12 Weight kg Model No. Worktops 610 38 645 11.6 6902.300 6902.300 – – ◾ 1000 38 895 24 6902.100 6902.100 6902.100 6902.100 – 600 600 600 42.5 6902.500 6902.500 6902.500 6902.500 – Monitor housing Accessories Packs of Base/plinth, stationary 1 pc(s). 8800.920 8800.920 8800.920 8800.920 8800.920 517 Cross member, adjustable 2 pc(s). 8601.680 8601.680 8601.680 8601.680 – 520 Twin castors 1 set(s) 7495.000 7495.000 7495.000 7495.000 7495.000 522 Handle adaptor for comfort handle 1 pc(s). 8611.300 8611.300 – – – 549 Cable gland 1 pc(s). 6902.770 6902.770 6902.770 6902.770 6902.770 660 Mounting plate for enclosure width 600 mm 1 pc(s). 8614.675 8614.675 8614.675 8614.675 8614.680 596 Component shelf, static installation 1 pc(s). 8800.900 8800.900 8800.900 8800.900 8800.900 628 Component shelf, pull-out 1 pc(s). 6902.960 6902.960 6902.960 6902.960 6902.960 627 Drawer tray 1 pc(s). 6902.700 6902.700 6902.700 6902.700 6902.700 628 Paper removal flap 1 pc(s). 6903.200 6903.200 6903.200 6903.200 6903.200 713 Support arm systems see page 135 Command panels see page 130 Rittal Catalogue 34/Enclosures 121 122 Rittal Catalogue 34/Enclosures Operating housings/support arm systems, stand systems Comfort Panel Comfort Panel ............................................................................................124 Comfort Panel, configuration examples.......................................................125 Optipanel Optipanel....................................................................................................126 Optipanel, configuration examples ..............................................................127 Operating housings Operating housing with handle strips ..........................................................130 Operating housing for desktop TFT up to 24˝ ..............................................132 Compact Panel...........................................................................................133 Support arm systems Support arm systems, overview..................................................................135 Support arm system CP 40, steel ...............................................................137 Support arm system CP 40, stainless steel.................................................140 Support arm system CP 60 ........................................................................145 Support arm system CP 120 ......................................................................149 Support arm system CP 180 ......................................................................153 Accessories ................................................................................................156 Stand systems Pedestal, modular.......................................................................................164 Pedestal, complete.....................................................................................165 Pedestal, open, pillar, small ........................................................................166 Accessories ................................................................................................167 Rittal Catalogue 34/Enclosures 123 Comfort Panel System accessories Page 507 Support arm systems Page 135 Stand systems Page 164 Industrial Workstations Page 120 Colour: – Enclosure: Natural anodised – Corner pieces: RAL 7035 – Corner protectors: Similar to RAL 7024 Protection category IP to IEC 60 529: – IP 65 Note: – The support arm connection may be swapped over by rotating the enclosure H Material: – Enclosure: Extruded aluminium section – Corner pieces: Die-cast zinc – Corner protectors: Plastic Approvals: – UL B Technical details: Available on the Internet Supply includes: – Seals and assembly parts for front panels For front panel width (B) mm Packs of For front panel height (H) mm Installation depth mm 520 520 520 400 500 600 Page 74 152 191 74 152 191 74 152 191 6372.541 6372.542 6372.543 6372.551 6372.552 6372.553 6372.561 6372.562 6372.563 7.8 11.7 13.8 8.8 12.3 15.2 9.7 13.5 16.7 Support arm connection ▭ 120 x 65 mm ◾ – – ◾ – – ◾ – – Support arm connection Ø 130 mm – ◾ ◾ – ◾ ◾ – ◾ ◾ Hinged rear panel with screw lock ◾ – – ◾ – – ◾ – – – ◾ – – ◾ – – ◾ – – – ◾ – – ◾ – – ◾ Model No. 1 pc(s). Weight kg Version Hinged rear panel with cam1) Screw-fastened rear panel2) Accessories Front panel 1 pc(s). 6028.014 6028.014 6028.014 6028.015 6028.015 6028.015 6028.016 6028.016 6028.016 704 Mounting bracket for interior installation 4 pc(s). 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 617 Spring nut M5 50 pc(s). 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 625 Earthing plate 1 pc(s). 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 645 1) With 3 mm double-bit lock insert, may be exchanged for 41 mm lock inserts, type C, see page 570, plastic handles and T handles, type C, see page 569. 2) Enclosure folds down at the front with side double-bit lock insert, may be exchanged for 41 mm lock inserts, type C, see page 570, plastic handles and T handles, type C, see page 569. 124 Rittal Catalogue 34/Enclosures Comfort Panel Configuration examples Front panel height mm Cut-out dimensions B H 400 7 HE 8 HE 53.7 1 W = 484 mm H = 364 mm = 18 mm all-round for attaching the adaptor plate H B 7 HE 8 HE 9 HE 500 153.7 109.2 65 1 W = 484 mm H = 464 mm = 18 mm all-round for attaching the adaptor plate H 7 HE 8 HE 7 HE 9 HE 8 HE 9 HE B 3.5 HE 600 253.7 209.2 165 98.7 3.5 HE 3.5 HE 54.2 1 W = 484 mm H = 564 mm = 18 mm all-round for attaching the adaptor plate Free space, available for individual installed equipment such as rows of switches etc. HE = U Rittal Catalogue 34/Enclosures 125 Optipanel System accessories Page 507 Support arm systems Page 135 Stand systems Page 164 Industrial Workstations Page 120 Colour: – Enclosure: Natural anodised – Corner pieces: RAL 7035 – Corner protectors: Similar to RAL 7024 Note: – The support arm connection may be swapped over by rotating the enclosure Approvals: – UL H Material: – Enclosure: Extruded aluminium section – Corner pieces: Die-cast zinc – Corner protectors: Plastic B Technical details: Available on the Internet Protection category IP to IEC 60 529: – IP 65 Supply includes: – Seals For front panel width (B) mm Packs of For front panel height (H) mm Installation depth mm 430 482.6 482.6 520 520 520 343 310.3 354.8 400 500 600 100 100 100 100 150 150 150 6380.0201) 6380.000 6380.0401) 6380.400 6380.410 6380.510 6380.610 5.3 6.2 6.6 5.8 7.3 8.3 9.2 Support arm connection ▭ 120 x 65 mm ◾ ◾ ◾ ◾ – – – Support arm connection Ø 130 mm – – – – ◾ ◾ ◾ Hinged rear panel2) ◾ ◾ ◾ ◾ ◾ ◾ ◾ Seals and assembly parts for front panels – – – ◾ ◾ ◾ ◾ Model No. 1 pc(s). Weight kg Page Version Accessories Front panel 1 pc(s). – 6028.010 – 6028.014 6028.014 6028.015 6028.016 704 Handle set, horizontal 1 pc(s). – 6385.010 6385.010 – – – – 700 Mounting bracket for interior installation 4 pc(s). 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 6205.100 617 Mounting bracket 4 pc(s). 4597.000 4597.000 4597.000 4597.000 4597.000 4597.000 4597.000 617 Earthing plate 1 pc(s). 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 2570.500 645 Spring nut M5 50 pc(s). 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 6108.000 625 1) To fit TFT monitors, see page 706. 2) With 3 mm double-bit lock insert, may be exchanged for 41 mm lock inserts, type C, see page 570, plastic handles and T handles, type C, see page 569. 126 Rittal Catalogue 34/Enclosures Optipanel Configuration examples Front panel height mm Cut-out dimensions B H 400 7 HE 8 HE 53.7 1 W = 484 mm H = 364 mm = 18 mm all-round for attaching the adaptor plate H B 7 HE 8 HE 9 HE 500 153.7 109.2 65 1 W = 484 mm H = 464 mm = 18 mm all-round for attaching the adaptor plate H 7 HE 8 HE 7 HE 9 HE 8 HE 9 HE B 3.5 HE 600 253.7 209.2 165 98.7 3.5 HE 3.5 HE 54.2 1 W = 484 mm H = 564 mm = 18 mm all-round for attaching the adaptor plate Free space, available for individual installed equipment such as rows of switches etc. HE = U Rittal Catalogue 34/Enclosures 127 Operating housing with handle strips 128 Rittal Catalogue 34/Enclosures Uniform design and function Modern design, adapted to support arm system CP 60/120/180 Convenience in perfection ◾ Shaped interior installation bracket with TS system punchings, to match TS system accessories ◾ Fast, safe, simple servicing access from the front or rear ◾ Lock with integral door runners for easy locking Built-in added value ◾ Support arm connection for one-person assembly ◾ Support arm connection Ø 130 mm, preformed off-centre in the reinforcement plate, easily drilled out Ergonomic design ◾ Design strip including handle function ◾ Aluminium front panel, easily dismantled for machining Rittal Catalogue 34/Enclosures 129 Operating housing with handle strips System accessories P. 507 Support arm systems P. 135 Stand systems P. 164 Command panel housing with door, stainless steel P. 189 Surface finish: – Enclosure and door: Dipcoatprimed, powder-coated on the outside, textured paint – Handle strip: Natural anodised – Front panel: Natural anodised Colour: – Enclosure and door: RAL 7035 – Handle strip: Natural anodised – Front panel: Natural anodised – Cover caps: similar to RAL 7024 Protection category IP to IEC 60 529: – IP 55 Note: – The support arm connection and door hinge may be swapped over by rotating the enclosure – Optional: Support arm connection Ø 130 mm, preformed offcentre in the reinforcement plate, easily drilled out Width (B) mm Packs of Height (H) mm Depth (T) mm Model No. 1 pc(s). Weight kg Servicing access T B T B H Supply includes: – Enclosure with cut-out and reinforcement for support arm connection Ø 130 mm – Front with maximum cut-out, covered with easily machinable 3 mm aluminium front panel – Side handle strips and cover caps – Cam lock with 3 mm double-bit insert – Integral interior installation bracket with TS system punchings H Material: – Enclosure and door: Sheet steel – Handle strips: Aluminium – Front panel: Aluminium – Cover caps: Plastic – Lock systems for servicing access from the front: 41 mm lock inserts, lock cylinder, plastic handles and T-handles, type C – Lock systems for servicing access from the rear: 41 mm lock inserts, type A, lock cylinder, plastic handles and T-handles, type B Approvals: – CSA Technical details: Available on the Internet 300 300 380 380 380 200 300 300 380 380 155 210 210 210 210 6320.000 6315.100 6315.200 6315.300 6320.300 9.8 Page 4.5 7.0 7.5 9.8 from the front – ◾ ◾ ◾ – from the rear ◾ – – – ◾ – 8612.130 8612.130 – – 606 – – – – – 609 Accessories TS punched section with mounting flange, 17 x 73 mm 4 pc(s). TS punched rail 18 x 38 mm TS support strips Mounting bracket Mini-comfort handle 130 20 pc(s). – – – 4594.000 4594.000 609 4 pc(s). 4597.000 4597.000 4597.000 4597.000 4597.000 617 4 pc(s). 6205.100 6205.100 6205.100 6205.100 6205.100 617 – – – – see page 567 Rittal Catalogue 34/Enclosures Operating housing with handle strips Width (B) mm Packs of Height (H) mm Depth (T) mm Model No. 1 pc(s). Weight kg Servicing access 500 500 600 600 600 500 500 380 600 600 210 210 210 210 210 6315.400 6320.400 6320.500 6315.600 6320.600 22.8 16.8 16.8 15.4 22.8 from the front ◾ – – ◾ – from the rear – ◾ ◾ – ◾ Page Accessories TS punched section with mounting flange, 17 x 73 mm 4 pc(s). 8612.150 8612.150 – 8612.160 8612.160 TS punched rail 18 x 38 mm 4 pc(s). 8612.250 8612.250 – 8612.260 8612.260 609 TS support strips 20 pc(s). 4695.000 4695.000 4594.000 4696.000 4696.000 609 4 pc(s). 4597.000 4597.000 4597.000 4597.000 4597.000 617 4 pc(s). 6205.100 6205.100 6205.100 6205.100 6205.100 617 – see page see page – see page 567 Mounting bracket Mini-comfort handle 606 Support arm system CP 60/120/180 New see page 135 Rittal Catalogue 34/Enclosures 131 Operating housing for desktop TFT up to 24" System accessories Page 507 Support arm systems Page 135 Stand systems Page 164 Design: – Viewing window with singlepane safety glass Material: – Enclosure and door: Sheet steel – Handle strips: Aluminium – Cover caps: Plastic – Viewing window: Single-pane safety glass – TFT holder: Sheet steel Surface finish: – Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint – Handle strip: Natural anodised Width (B) mm Colour: – Enclosure and door: RAL 7035 – Handle strip: Natural anodised – Cover caps: similar to RAL 7024 Protection category IP to IEC 60 529: – IP 55 Supply includes: – Enclosure with cut-out and reinforcement for support arm connection Ø 130 mm – Viewing window – Holder for desktop TFT with VESA 75/100 locator – Side handle strips and cover caps – Rear door with r/h hinge – Cam lock with 3 mm double-bit insert Packs of Height (H) mm T B Approvals: – CSA Technical details: Available on the Internet 650 Page 450 Depth (T) mm Model No. Note: – The support arm connection and door hinge may be swapped over by rotating the enclosure – Optional: Support arm connection Ø 130 mm, preformed offcentre in the reinforcement plate, easily drilled out – Lock insert may be exchanged for 27 mm lock inserts, type A, lock cylinder, plastic handles and T-handles, type B H For the installation of commercially available desktop TFTs with a screen diagonal of up to 24" in the formats 16:9/16:10. 155 1 pc(s). 6321.000 Weight kg 18.0 Cam lock 1 Accessories Lock systems 132 from page 560 Rittal Catalogue 34/Enclosures Compact Panel System accessories Page 507 Support arm systems Page 135 Stand systems Page 164 For small operating units built into front panels. The front panel is inserted from the rear and secured with screw clamps. Special front panels with a material thickness of between 2 and 6 mm are possible. Rear panel optionally hinged on the left or right. Roof tray with cut-out and reinforcement for support arm system CP 40, steel. Width mm Design: – With support arm connection CP 40, steel Material: – Roof tray, base tray, rear panel: Aluminium – Side parts: Extruded aluminium section – Screw cover: Plastic Packs of Height mm Surface finish: – Roof tray, base tray, side parts: Powder-coated – Rear panel: natural anodised Colour: – RAL 7024 Protection category IP to IEC 60 529: – IP 65 Supply includes: – Roof tray – Base tray – Rear panel – Side parts – Screw cover – Seal and screw clamp Technical details: Available on the Internet 241 241 315 315 238 388 238 388 Depth mm 87 87 87 87 To fit front panel width mm 178 178 252 252 To fit front panel height mm Model No. 1 pc(s). Weight kg 200 350 200 350 6340.000 6340.100 6340.300 6340.400 2.8 3.8 3.4 4.5 Page Accessories Front panels 1 pc(s). 6028.500 6028.510 6028.530 6028.540 704 Wall mounting bracket 1 set(s) 6341.000 6341.000 6341.000 6341.000 590 Spring nut M5 Cover plate Rittal Catalogue 34/Enclosures 50 pc(s). 6108.000 6108.000 6108.000 6108.000 625 1 set(s) 6505.200 6505.200 6505.200 6505.200 704 133 134 Support arm systems Support arm system CP 40 Component overview, steel.........................................................................137 Support section CP 40, steel ......................................................................138 Components CP 40, steel...........................................................................139 Component overview, stainless steel ..........................................................140 Support section CP 40, stainless steel........................................................140 Components CP 40, stainless steel ............................................................141 Support arm system CP 60 Component overview..................................................................................145 Support section CP 60 ...............................................................................146 Components CP 60....................................................................................147 Support arm system CP 120 Component overview..................................................................................149 Support section CP 120 .............................................................................150 Components CP 120..................................................................................151 Support arm system CP 180 Component overview..................................................................................153 Support section CP 180 .............................................................................154 Components CP 180..................................................................................155 Load information Comparison of support arm systems Permissible static load [N] (Enclosure and vertical support arm section) 1800 1200 600 0 0 500 Jib length (mm) 1500 2000 2500 3000 CP 40 CP 60 CP 120 CP 180 1000 Support arm configurator The support arm configurator determines the correct support arm system according to user-specific parameters. More detailed information can be found at: www.rittal.com Rittal Catalogue 34/Enclosures 135 9 11 7 12 6 8 1 2 7 3 136 4 Support arm system CP 40, steel 10 Component overview Tilting adapter +100/-60° for support arm connection ▭ 120 x 65 mm/ ▭ 90 x 71 mm (6206.460) Attachment CP 40, steel, for support arm connection ▭ 90 x 71 mm (6501.070) Coupling CP 40, steel, for support arm connection ▭ 90 x 71 mm (6501.050) Coupling CP 40, steel, for support arm connection ▭ 120 x 65 mm (6501.130) Connection console Vesa 75/100 for support arm connection ▭ 120 x 65 mm (6206.480) Angle coupling 90° CP 40, steel (6501.120) Support section CP 40, steel (6501.000, 6501.020) Angle piece 90° CP 40, steel (6501.140) Wall-mounted hinge CP 40, steel (6501.150) Top-mounted joint CP 40, steel (6501.160) Wall/base mounting bracket, CP 40, small (6501.110) Mounting components CP 40, steel, for signal pillar (2375.030) Load information When using support arm system CP 40, steel in conjunction with support arm system CP 60 (in the horizontal path of the machine), the load diagram for support arm system CP 60 shall apply. 800 Permissible static load [N] (Enclosure and vertical support arm section) 600 400 200 0 0 500 1000 1500 Jib length (mm) 5 Rittal Catalogue 34/Enclosures 137 Support arm system CP 40, steel Comfort Panel Page 124 Optipanel Page 126 Compact Panel Page 133 Operating housing with handle strips Page 130 Support section CP 40, steel Attached to the connection components via 2 clamping screws. Size: – External diameter: 48.3 mm – Wall thickness: 4.0 mm Supply includes: – Support section, steel Note: – Stainless steel, see page 140 Material: – Steel conduit, powder coated Technical details: Available on the Internet Colour: – RAL 7035 Integral adjustment facility 48.3 Combination with support arm system CP 60 1 Also available in stainless steel, see page 140 10 7 4 11 8 6 3 2 9 12 2 5 5 13 Support section CP 40, steel, 1000 mm (6501.020) Support section CP 40, steel, 500 mm (6501.000) Wall-mounted hinge CP 40, steel (6501.150) Angle piece 90° CP 40, steel (6501.140) Coupling CP 40, steel (6501.050) Wall-mounted hinge CP 60 (6206.740) Support section CP 60, 1000 mm (6206.100) Angle adaptor 90° for support arm combination CP 60/40 (6206.640) Wall/base mount, rigid, CP 40, stainless steel (6663.000) Support section CP 40, stainless steel, 1000 mm (6660.010) Angle piece 90° CP 40, stainless steel (6664.300) Support section CP 40, stainless steel, 500 mm (6660.050) Housing coupling CP 40, stainless steel (6664.000) 138 Rittal Catalogue 34/Enclosures Support arm system CP 40, steel Colour RAL Weight kg Length mm Rigid Rotating/tilting Enclosure section Desk section Wall section Model No. Tilting adaptor +100/-60° for support arm connection ▭ 120 x 65 mm/▭ 90 x 71 mm see page 162 ◾ – – 7035/ 7024 6206.460 – – 1.0 7024 6501.070 – – 1.1 7024 6501.050 – – 7024 6501.130 – – 6206.480 – – 6501.120 – – 0.8 Attachment CP 40, steel, for support arm connection ▭ 90 x 71 mm – ◾ – Coupling CP 40, steel, for support arm connection ▭ 90 x 71 mm ◾ – – Coupling CP 40, steel, for support arm connection ▭ 120 x 65 mm ◾ – – 1.5 Connection console VESA 75/100 for support arm connection ▭ 120 x 65 mm see page 156 – ◾ – 1.1 7035/ 7024 Angle coupling 90° CP 40, steel, for support arm connection ▭ 90 x 71 mm ◾ – – 1.6 7024 – – 500 1000 2.1 4.2 7035 7035 – ◾ – 1.1 7024 6501.140 – 6501.140 ◾ – – 1.8 7024 – – 6501.160 ◾ – – 2.2 7024 – – 6501.150 – ◾ – 0.7 7024 – – 6501.110 ◾ – 0.3 7024 2375.030 – – Support section CP 40, steel 6501.000 6501.020 Angle piece 90° CP 40, steel Top-mounted joint CP 40, steel Wall-mounted hinge CP 40, steel Wall/base mounting bracket, CP 40, steel Mounting component CP 40, steel, for signal pillar see page 720 – Accessories Angle adaptor 90° for support arm combination CP 60/40 6206.640 Rittal Catalogue 34/Enclosures see page 158 139 Support arm system CP 40, stainless steel Command panel housing with door, stainless steel Page 189 Premium Panel, stainless steel Page 188 Support section CP 40, steel Page 137 Support section CP 40, stainless steel Attached to the connection components via 2 clamping screws. Size: – External diameter: 48.3 mm – Wall thickness: 3.6 mm 140 Material: – Stainless steel Surface finish: – Brushed, grain 240 (support section and wall console only) Protection category IP to DIN 40 050-9: – IP 69K (resistant to high-pressure cleaning) Supply includes: – Support section, stainless steel Technical details: Available on the Internet 48.3 Rittal Catalogue 34/Enclosures Support arm system CP 40, stainless steel Length mm Weight kg Material Wall section Rigid Desk section Rotating/tilting Enclosure section – ◾ – 0.7 1.4305 (AISI 303) 6664.100 – – – ◾ – 1.3 1.4305 (AISI 303) 6664.500 – – ◾ – – 1.1 1.4305 (AISI 303) 6664.000 – – – ◾ 500 1000 2.0 3.9 1.4301 (AISI 304) – ◾ – 1.3 1.4305 (AISI 303) 6664.300 – 6664.300 1.7 1.4305 (AISI 303) – – 6663.000 Model No. Tilting adaptor 10° CP 40, stainless steel Mounting bracket CP 40, stainless steel Coupling CP 40, stainless steel Support section CP 40, stainless steel 6660.050 6660.010 Angle piece 90° CP 40, stainless steel Wall/base mounting bracket, rigid, CP 40, stainless steel – ◾ – Wall/base mounting bracket, swivel, CP 40, stainless steel Rear, M8 thread Front, hole Ø 9 mm ◾ – – 3.9 4.5 1.4305 (AISI 303) – – 6663.500 6663.400 – ◾ – 1.5 1.8 1.4301 (AISI 304) – – 6665.000 6665.500 Wall console CP 40, stainless steel Rear, M8 thread Front, hole Ø 9 mm Load information Permissible load depending on system configuration 800 Permissible static load [N] (Enclosure and vertical support arm section) 600 400 200 0 0 500 1000 1500 Jib length (mm) Rittal Catalogue 34/Enclosures 141 Support arm system CP 60/120/180 142 Uniform engineering ◾ All load levels from 600 to 1,800 N ◾ One system ◾ Simple system replacement in the vertical axis to cut costs and weight ◾ Consistent combination options Multi-functional assembly ◾ Uniform adjustment principle, also possible retrospectively without dismantling ◾ Perfect limitation of rotation ranges ◾ Simple, one-person installation ◾ Sections are easily cut to the required length Efficient cable management ◾ Cross-section sufficient for large connectors ◾ Simple separation between data and power cables is supported ◾ Flexible cable entry and routing options ◾ Automatic, consistent potential equalisation of all support arm components ◾ Open support section for easy upgrade and servicing access Rittal Catalogue 34/Enclosures 143 19 17 20 16 21 11 15 11 10 5 12 11 3 6 13 8 14 9 144 Support arm system CP 60 Component overview Tilting adaptor 10° for support arm connection Ø 130 mm (6206.400) Tilting adaptor 10° for support arm connection ▭ 120 x 65 mm (6206.440) Tilting adaptor +/-45° for support arm connection Ø 130 mm (6206.420) Tilting adaptor +100/-60° for support arm connection ▭ 120 x 65 mm (6206.460) Connection console VESA 75/100 for support arm connection ▭ 120 x 65 mm (6206.480) Attachment CP 60, for support arm connection Ø 130 mm (6206.320) Attachment CP 60, for support arm connection ▭ 120 x 65 mm (6206.360) Coupling CP 60, for support arm connection Ø 130 mm (6206.300) 18 Coupling CP 60, for support arm connection ▭ 120 x 65 mm (6206.340) Angle coupling 90° CP 60 for support arm connection Ø 130 mm (6206.380) Support section CP 60, solid (6206.025, 6206.050, 6206.100, 6206.200) Angle adaptor 90° for support arm combination CP 60/40 (6206.640) Support section CP 40, steel (6501.000) Coupling CP 40, steel, for support arm connection ▭ 90 x 71 mm (6501.050) Angle piece 90° CP 60 (6206.600) Intermediate hinge CP 60 (6206.620) Top-mounted joint CP 60, horizontal outlet (6206.700) Wall-mounted hinge CP 60, horizontal outlet (6206.740) Wall/base mounting bracket CP 60, small (6206.820) Wall/base mounting bracket CP 60, large (6206.800) Mounting component CP 60 for signal pillar (6206.900) Load information Permissible static load [N] (Enclosure and vertical support arm section) Permissible load depending on system configuration 4 1 2 800 600 400 200 500 1000 1500 2000 Jib length (mm) 1 System layout without intermediate hinge 6206.620 System layout with intermediate hinge 6206.620 2 7 Note: – Wall/base mounting bracket, small 6206.820 must not be used in conjunction with intermediate hinge 6206.620! – Intermediate hinge 6206.620 should only be used once per system! 145 Support arm system CP 60 Comfort Panel Page 124 Optipanel Page 126 Compact Panel Page 133 Operating housing with handle strips Page 130 Size: – External dimensions: 59 x 85 mm Colour: – Support section: RAL 7035 Supply includes: – Support section Material: – Support section: Extruded aluminium section Combination with support arm system CP 40 85 Support section CP 60 Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Closed cable duct with a large cross-section. Technical details: Available on the Internet 59 Combination with support arm system CP 120 7 2 8 3 9 1 6 4 10 5 11 Wall-mounted hinge CP 60, horizontal outlet (6206.740) Support section CP 60, 1000 mm (6206.100) 90° angle adaptor for support arm combination CP 60/40 (6206.640) Support section CP 40, steel, 500 mm (6501.000) Coupling CP 40, steel, for support arm connection ▭ 120 x 65 mm (6501.130) Wall-mounted hinge CP 120, horizontal outlet (6212.740) Support section CP 120, 1000 mm (6212.100) 90° angle piece CP 120 (6212.600) Adaptor for support arm combination CP 120/60 (6212.640) Support section CP 60, 500 mm (6206.050) Coupling CP 60 for support arm connection ▭ 120 x 65 mm (6206.340) 146 Rittal Catalogue 34/Enclosures Support arm system CP 60 Enclosure section CP 60/40 Colour RAL Weight kg Length mm Rigid Rotating/tilting Enclosure section CP 60 Desk section CP 60 Wall section CP 60 Model No. Tilting adaptor 10° for support arm connection Ø 130 mm ▭ 120 x 65 mm – ◾ 0.6 – 0.4 7035 6206.400 – – 6206.440 – – Tilting adaptor +/-45°/tilting adaptor +100°/-60° for support arm connection Ø 130 mm ▭ 120 x 65 mm 1.2 ◾ – – 0.8 ▭ 90 x 71 mm 0.8 7024 7035/ 7024 – ◾ – – see page 161/162 6206.420 – – – 6206.460 6206.460 – – – 6206.460 – Connection console VESA 75/100 for support arm connection ▭ 120 x 65 mm – – see page 156 7035/ 7024 6206.480 – – – 0.7 7035 6206.320 – – – 1.0 7035 6206.360 – – – 1.0 7024 – 6501.070 – – 2.1 7035 6206.300 – – – 1.2 7035 6206.340 6501.130 – – 1.1 7024 – 6501.050 – – – – 6206.380 – – – CP 60 CP 401) CP 60 CP 60 6206.025 6206.050 6206.100 6206.200 – 6501.000 6501.020 – 6206.025 6206.050 6206.100 6206.200 6206.025 6206.050 6206.100 6206.200 1.1 Attachment CP 60/40 for support arm connection Ø 130 mm ▭ 120 x 65 mm – ◾ – ▭ 90 x 71 mm Coupling CP 60/40 for support arm connection Ø 130 mm ▭ 120 x 65 mm ◾ – – ▭ 90 x 71 mm Angle coupling 90° CP 60/40 for support arm connection Ø 130 mm ◾ – – 1.8 7035/ 7024 Support section CP 60/40 Solid – – 250 500 1000 2000 1.25 2.5 5.0 10.0 7035 Angle adaptor 90° for support arm combination CP 60/40 see page 158 – ◾ – 1.0 7035/ 7024 – 6206.640 – – – ◾ – 0.5 7035/ 7024 6206.600 – – 6206.600 – – 2.2 7035/ 7024 – – 6206.620 – – – 2.2 7035/ 7024 – – – 6206.700 – – 2.85 7035/ 7024 – – – 6206.740 0.35 7035 – – – 6206.820 1.4 7035/ 7024 – – – 6206.800 Angle piece 90°, CP 60 Intermediate hinge CP 60 ◾ Top-mounted joint CP 60 Horizontal outlet ◾ Wall-mounted hinge CP 60 Horizontal outlet ◾ Wall/base mounting bracket CP 60, small – ◾ – Wall/base mounting bracket CP 60, large – ◾ – Mounting component CP 60 for signal pillar – ◾ – see page 720 0.1 7024 6206.900 6206.900 6206.900 6206.900 Accessories Adaptor CP 120/60 Ø 130 mm to ▭ 120 x 65 mm 6212.500 1) see page 157 Weight information and diagrams for CP 40, see page 139 Rittal Catalogue 34/Enclosures 147 15 17 13 16 6 11 18 6 10 5 7 7 9 1 6 8 2 3 148 4 Support arm system CP 120 Component overview Adaptor CP 120 from support arm connection Ø 130 mm to ▭ 120 x 65 mm (6212.500) Attachment CP 120 for support arm connection Ø 130 mm (6212.320) Coupling CP 120 for support arm connection Ø 130 mm 10 (6212.300) Coupling CP 60 for support arm connection ▭ 120 x 65 mm (6206.340) Angle coupling 90° CP 120 for support arm connection Ø 130 mm (6212.380) Support section CP 120, solid (6212.025, 6212.050, 6212.100, 6212.200) Support section CP 120, open (6212.150, 6212.110, 6212.210) Support section CP 60, solid (6206.025, 6206.050, 6206.100, 6206.200) Adaptor for support arm combination CP 120/60 (6212.640) 6 12 14 Angle piece 90° CP 120 (6212.600) Intermediate hinge CP 120 (6212.620) Top-mounted joint CP 120, vertical outlet (6212.720) Top-mounted joint CP 120, horizontal outlet (6212.700) Wall-mounted hinge CP 120, vertical outlet (6212.760) Wall-mounted hinge CP 120, horizontal outlet (6212.740) Wall/base mounting bracket CP 120, small (6212.820) Wall/based mounting bracket CP 120, large (6212.800) Mounting component CP 120/180 for signal pillar (6212.900) Load information Permissible static load [N] (Enclosure and vertical support arm section) Permissible load depending on system configuration 1 1200 1100 1000 2 3 800 2 500 300 200 1 500 1000 1500 2000 2500 Jib length (mm) System layout without intermediate hinge 6212.620, with solid or open support section System layout with intermediate hinge 6212.620 with solid support section System layout with intermediate hinge 6212.620 and open support section Maximum system length 2500 mm for systems with horizontal outlet at the start of the system. Maximum system length 1500 mm for systems with a vertical outlet at the start of the system. The overall height with a vertical system start must not exceed 500 mm. Note: – Wall/base mounting bracket, small 6212.820 must not be used in conjunction with intermediate hinge 6212.620! – Intermediate hinge 6212.620 should only be used once per system! Rittal Catalogue 34/Enclosures 149 Support arm system CP 120 Comfort Panel Page 124 Optipanel Page 126 Operating housing with handle strips Page 130 Operating housing for desktop TFT Page 132 X-shaped profiling for greater load capacity, large cable routing channels. Upper channel adequate for cables with large connectors (e.g. DVI or VGA) and available/usable throughout the entire system. Size: – External dimensions: 75 x 120 mm Material: – Support section: Extruded aluminium section 120 Support section CP 120 Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Closed cable duct with a large crosssection. Open cable duct for easy servicing access and for preassembled cables with connectors; lockable via cover section. Colour: – Support section: RAL 7035 Supply includes: – Support section 75 75 Technical details: Available on the Internet Combination with support arm, height adjustable 2 2 3 3 2 2 4 4 5 8 6 1 7 1 8 10 Wall-mounted hinge CP 120, horizontal outlet (6212.740) Adaptor CP 120 to support arm, height-adjustable 2 3 4 1 8 2 9 9 (6071.600) Support arm, height-adjustable, see page 160 Angle piece 90° CP 120 (6212.600) Adaptor for support arm combination CP 120/60 (6212.640) Support section CP 60, L = 500 mm (6206.050) Coupling CP 60 for support arm connection ▭ 120 x 65 mm (6206.340) Support section CP 120, solid, L = 500 mm (6212.050) Coupling CP 120 for support arm connection Ø 130 mm (6212.300) Intermediate hinge CP 120 (6212.620) 150 Rittal Catalogue 34/Enclosures Support arm system CP 120 Enclosure section CP 120/60 Colour RAL Weight kg Length mm Rigid Rotating/tilting Enclosure section CP 120 Desk section CP 120 Wall section CP 120 Model No. Adaptor CP 120/60 from support arm connection Ø 130 mm to ▭ 120 x 65 mm see page 157 – ◾ – 0.5 7035 6212.500 6212.500 – – Attachment CP 120/60 for support arm connection Ø 130 mm – ◾ – 0.7 7035 6212.320 6206.320 – – ▭ 120 x 65 mm – ◾ – 0.7 7035 – 6206.360 – – 6212.300 6206.300 – – – 6206.340 – – 6212.380 – – – CP 120 CP 601) CP 120 CP 120 6206.025 6206.050 6206.100 6206.200 6212.025 6212.050 6212.100 6212.200 6212.025 6212.050 6212.100 6212.200 Coupling CP 120/60 for support arm connection Ø 130 mm ◾ – – 2.0 7035 ▭ 120 x 65 mm Angle coupling 90° CP 120 for support arm connection Ø 130 mm ◾ – – 2.1 7035/ 7024 Support section CP 120/60 Solid – – – – – – – – 250 500 1000 2000 2.0 3.9 7.8 15.6 7035 6212.025 6212.050 6212.100 6212.200 Open – – – – – – 500 1000 2000 4.6 9.2 18.4 7035/ 7024 6212.150 6212.110 6212.210 – – – 6212.150 6212.110 6212.210 6212.150 6212.110 6212.210 Adaptor for support arm combination CP 120/60 see page 159 – ◾ – 0.7 7035 – 6212.640 – – – ◾ – 1.1 7035/ 7024 6212.600 – – 6212.600 – – 4.4 7035/ 7024 – – 6212.620 – Angle piece 90°, CP 120 Intermediate hinge CP 120 ◾ Top-mounted joint CP 120 Vertical outlet ◾ – – 3.8 7035 – – – 6212.720 Horizontal outlet ◾ – – 4.3 7035/ 7024 – – – 6212.700 Wall-mounted hinge CP 120 Vertical outlet ◾ – – 5.5 7035/ 7024 – – – 6212.760 Horizontal outlet ◾ – – 6.1 7035/ 7024 – – – 6212.740 0.5 7035 – – – 6212.820 2.5 7035/ 7024 – – – 6212.800 7024 6212.900 6212.900 6212.900 6212.900 Wall/base mounting bracket CP 120, small – ◾ – Wall/base mounting bracket CP 120, large – ◾ – Mounting component CP 120/180 for signal pillar see page 720 – ◾ – 0.1 Tilting adaptor For support arm connection Ø 130 mm and ▭ 120 x 65 mm see page 147 Accessories Adaptor CP 120 to support arm, height-adjustable 6071.600 1) see page 159 Weight information and diagrams for CP 60, see page 147 Rittal Catalogue 34/Enclosures 151 10 11 8 12 3 3 7 4 5 6 1 2 152 Rittal Catalogue 34/Enclosures Support arm system CP 180 Component overview Attachment CP 120 for support arm connection Ø 130 mm (6212.320) Coupling CP 120 for support arm connection Ø 130 mm (6212.300) Support section CP 180, solid (6218.050, 6218.100, 6218.200) 9 Support section CP 180, open (6218.150, 6218.110, 6218.210) Adaptor for support arm combination CP 180/120 (6218.640) Support section CP 120, solid (6212.025, 6212.050, 6212.100, 6212.200) Angle piece 90° CP 180 (6218.600) Intermediate hinge CP 120 (6218.620) Top-mounted joint CP 180, horizontal outlet (6218.700) Wall-mounted hinge CP 180, horizontal outlet (6218.740) Wall/base mounting bracket CP 180, small (6218.820) Mounting component CP 120/180 for signal pillar (6212.900) Load information Permissible load depending on system configuration 2000 1 Permissible static load [N] (Enclosure and vertical support arm section) 1800 2 1500 3 1300 1000 800 500 300 500 1000 1500 2000 2500 3000 Jib length (mm) System layout without intermediate hinge 6218.620 with solid or open support section System layout with intermediate hinge 6218.620 with solid support section System layout with intermediate hinge 6218.620 and open support section Note: – Intermediate hinge 6218.620 should only be used once per system! – Where possible, Rittal recommends that the support section between components 6218.700, 6218.740, 6218.820 and intermediate hinge 6218.620 should be of a solid design Rittal Catalogue 34/Enclosures 153 Support arm system CP 180 Comfort Panel Page 124 Optipanel Page 126 Operating housing with handle strips Page 130 Operating housing for desktop TFT Page 132 X-shaped profiling for greater load capacity, large cable routing channels. Upper channel adequate for cables with large connectors (e.g. DVI or VGA) and available/usable throughout the entire system. Size: – External dimensions: 90 x 160 mm Material: – Support section: Extruded aluminium section Colour: – Support section: RAL 7035 Supply includes: – Support section 160 Support section CP 180 Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Closed cable duct with a large cross-section. Open cable duct for easy servicing access and for pre-assembled cables with connectors; lockable via cover section. 90 90 Technical details: Available on the Internet Combination with support arm system CP 120 2 3 4 1 5 6 Wall-mounted hinge CP 180, horizontal outlet (6218.740) Support section, solid CP 180, 1000 mm (6218.100) Angle piece 90° CP 180 (6218.600) Adaptor for support arm combination CP 180/120 (6218.640) Support section CP 120, solid, L = 500 mm (6212.050) Coupling CP 120 for support arm connection Ø 130 mm (6212.300) 154 Rittal Catalogue 34/Enclosures Support arm system CP 180 Colour RAL Wall section CP 180 Weight kg Desk section CP 180 Length mm Rigid Rotating/tilting Enclosure section CP 180/120 – 0.7 7035 6212.320 – – 7035 6212.300 – – CP 1201) CP 180 CP 180 – 6218.050 6218.100 6218.200 – 6218.050 6218.100 6218.200 Model No. Attachment CP 120 for support arm connection Ø 130 mm – ◾ Coupling CP 120 for support arm connection Ø 130 mm ◾ – – 2.0 Solid – – – – – – – – 250 500 1000 2000 2.6 5.2 10.5 21 7035 6212.025 6212.050 6212.100 6212.200 Open – – – – – – 500 1000 2000 5.8 11.6 23.2 7035/ 7024 6212.150 6212.110 6212.210 6218.150 6218.110 6218.210 6218.150 6218.110 6218.210 – ◾ – 1.5 7035 6218.640 – – – ◾ – 3.6 7035/ 7024 6218.600 – 6218.600 ◾ – – 10.3 7035/ 7024 – 6218.620 – ◾ – – 18.0 7035/ 7024 – – 6218.700 ◾ – – 13.0 7035/ 7024 – – 6218.740 – ◾ – 5.0 7035 – – 6218.820 ◾ – 0.1 7024 6212.900 – 6212.900 Support section CP 180/120 Adaptor for support arm combination CP 180/120 see page 159 Angle piece 90° CP 180 Intermediate hinge CP 180 Top-mounted joint CP 180 Horizontal outlet Wall-mounted hinge CP 180 Horizontal outlet Wall/base mounting bracket CP 180, small Mounting component CP 120/180 for signal pillar only for 6218.600, 6218.700, see page 720 1) – Weight information and diagrams for CP 120, see page 151 Rittal Catalogue 34/Enclosures 155 Support arm system CP 40/60/120/180 Connection console VESA 75/100 For rear connection of ◾ Slimline operating housings ◾ Commercially available TFTs ◾ Industrial PCs with VESA 75/100 connection Connection to Rittal support arm systems ◾ CP 40 ◾ CP 60 ◾ CP 120 via adaptor from support arm connection Ø 130 mm to ▭ 120 x 65 mm Benefits: ◾ Fast, simple one-person assembly using machined keyholes ◾ More space for installation and servicing ◾ Cables may be routed to devices outside and inside the console ◾ Removable cover for simple cable routing and access to interior device connections ◾ Integral cable clamping facilities ◾ Cover with captive screws Material: – Cast aluminium Colour: – Connection console: RAL 7035 – Cover: RAL 7024 Weight kg Model No. 1.1 6206.480 Also required: – Attachment CP 60, for support arm connection ▭ 120 x 65 mm, 6206.360 – Coupling CP 60 for support arm connection ▭ 120 x 65 mm, 6206.340 – Tilting adaptor 10° for support arm connection ▭ 120 x 65 mm, 6206.440 – Coupling CP 40 for support arm connection ▭ 120 x 65 mm, 6501.130 – Tilting adaptor +/-45° for support arm connection ▭ 120 x 65 mm, 6206.460 – Adaptor from support arm connection Ø 130 mm to ▭ 120 x 65 mm, 6212. 500 Technical details: Available on the Internet VESA connection hole pattern 100 75 ◾ For rear connection of slimline operating housings ◾ Removable lid for simple cable entry Connection to Rittal support arm systems ◾ CP 40 ◾ CP 60 ◾ CP 120 via adaptor from support arm connection Ø 130 mm to ▭ 120 x 65 mm 75 Connection console 100 Supply includes: – Seals and assembly parts – Cable ties for cable clamping Colour RAL Weight kg Model No. 7024 0.7 6508.010 Technical details: Available on the Internet Material: – Cast aluminium Supply includes: – Seals and assembly parts – Cable ties for cable clamping 156 Rittal Catalogue 34/Enclosures Support arm system CP 40/60/120/180 Adaptor from support arm connection Ø 130 mm to ▭ 120 x 65 mm For external mounting of operating housings with support arm cutout ▭ 120 x 65 mm and connection console VESA 75/100 to ◾ Coupling CP 120, 6212.300 ◾ Mounting bracket CP 120, 6212.320 ◾ Angle coupling 90° CP 120, 6212.380 ◾ Pivot with jib, 6016.600 ◾ Pivot for machine-integrated installation, 6016.700 Height mm Weight kg Model No. 40 0.5 6212.500 Height mm Weight kg Model No. 20 0.6 6212.520 Technical details: Available on the Internet Material: – Cast aluminium Colour: – RAL 7035 Supply includes: – Seals – Assembly parts Adaptor from support arm connection Ø 180 mm to Ø 130 mm For mounting between: ◾ Enclosures with support arm connection Ø 180 mm and ◾ Coupling CP 60/120 for support arm connection Ø 130 mm, 6206.300, 6212.300 ◾ Mounting bracket CP 60/120 for support arm connection Ø 130 mm, 6206.320, 6212.320 ◾ Pivot, 6016.600, 6016.700 Technical details: Available on the Internet Material: – Cast aluminium Colour: – RAL 7035 Supply includes: – Seals – Assembly parts Adaptor for Siemens Pro-Panel For the external mounting of Siemens Simatic ◾ MP 377 15˝ Pro ◾ Thin Client 15˝ Pro ◾ Flat-Panel Monitor 15˝, 19˝ Pro ◾ HMI IPC477C 15˝ Pro Weight kg Model No. 0.3 6206.500 Technical details: Available on the Internet to support arm system ◾ CP 40, steel ◾ CP 60/120 with support arm connection ▭ 120 x 65 mm Material: – Aluminium Colour: – RAL 7035 Supply includes: – Seals – Assembly parts Rittal Catalogue 34/Enclosures 157 Support arm system CP 40/60/120/180 Connection plates with reinforcement plate ◾ For easy location of the command panel onto the support arm or pedestal. ◾ More space for cable entry For mounting command panels ◾ Comfort Panel from a front panel width of 247 mm and installation depth of 152 mm ◾ Optipanel from a front panel width of 220 mm and installation depth of 150 mm ◾ Sheet steel from 135 mm installation depth For mounting on support arm system components ◾ Mounting bracket CP 60/120 for support arm connection Ø 130 mm, 6206.320, 6212.320 ◾ Coupling CP 60/120 for support arm connection Ø 130 mm, 6206.300, 6212.300 ◾ Angle coupling 90° CP 60/120 for support arm connection Ø 130 mm, 6206.380, 6212.380 ◾ Tilting adaptor 10° CP 60/120 for support arm connection Ø 130 mm, 6206.400 ◾ Tilting adaptor +/–45°, system 60/120 for support arm connection Ø 130 mm, 6206.420 Angle adaptor 90° for support arm combination CP 60 to CP 40 Application: ◾ Connection component from CP 60 horizontal to CP 40 vertical ◾ For external mounting of small, slimline operating housings with CP 40 components, if the greater load capacity of CP 60 is needed for large jib lengths or if an intermediate hinge is required for the application. Weight kg Model No. 1.4 6212.540 Material: – Connection plate: Cast aluminium – Reinforcement plate: Sheet steel, 6 mm Colour: – RAL 7035 Supply includes: – Reinforcement plate – Seals – Assembly parts Technical details: Available on the Internet Weight kg Model No. 1.0 6206.640 Accessories: – Mounting component for signal pillars (6206.900), for external mounting on the cover, see page 720 Technical details: Available on the Internet Benefits: ◾ With integral adjustment facility ◾ Removable cover for simple cable entry Material: – Angle adaptor 90°: Cast aluminium – Cover: Plastic Colour: – Angle adaptor 90°: RAL 7035 – Cover: RAL 7024 Supply includes: – Seals – Adjusting screws – Self-tapping screws and clamping screws for support section attachment 158 Rittal Catalogue 34/Enclosures Support arm system CP 40/60/120/180 Adaptor For support arm combination ◾ CP 120 to 60 ◾ CP 180 to 120 Application: ◾ Connection component between large and small support arm systems, where this arrangement is chosen for static, visual or cost reasons ◾ For mounting small, flat command panels if the load capacity of a larger system is needed horizontally for long jib lengths For support arm system Weight kg Model No. CP 120 to 60 0.7 6212.640 CP 180 to 120 1.5 6218.640 Technical details: Available on the Internet Benefits: ◾ Integral adjustment facility Material: – Cast aluminium Colour: – RAL 7035 Supply includes: – Seals – Self-tapping screws for support section attachment Adaptor CP 120 to support arm, height-adjustable Application: ◾ For integration of the height-adjustable support arm to the support arm system CP 120 Weight kg Model No. 0.6 6071.600 Technical details: Available on the Internet Benefits: ◾ Integral adjustment facility Material: – Cast aluminium Colour: – RAL 7035 Supply includes: – Seals – Self-tapping screws for support section attachment Rittal Catalogue 34/Enclosures 159 Support arm system CP 40/60/120/180 Supply includes: – Assembly parts 1) For Model No. 962 9006 10 – 20 6510.210 1090 9006 15 – 32 6510.330 1090 9006 20 – 40 6510.340 populated enclosure and vertical support section Note: Maximum cross-section for cable entry: – 6510.210 = 8 x 15 mm 6510.330, 6510.340 Maximum no. of cables Maximum that may be inserted connector dimensions 54 18 For 6510.330 and 6510.340 ◾ More space for cable routing ◾ Cables with connectors such as DVI, VGA are also easily inserted ◾ Integral locking in three stages ◾ Superior load capacity Weight range Overall length Colour RAL kg1) mm 12 for support arm system CP 120 Offers enhanced ergonomics thanks to ◾ Adjustment range – for tall and short operators – for seated and standing work – adjustable to a maximum of 800 mm as required via an adjusting screw at the front of the support arm ◾ Precise coordination of the compression spring to the enclosure weight via an adjusting screw at the rear of the support arm ◾ Complete functional reliability – if the compression spring breaks, the arm will remain in position ◾ Clip-off plastic panels for access to integral cable routing ◾ Tilting angle of the mounted enclosure is identical in every height position 8 Support arm, height adjustable 39 1 2 Max. Ø 7 mm (3 x) Max. Ø 8.5 mm (2 x) Technical details: Available on the Internet Housing coupling for desktop mounting The stable, rotating connection with extra space for cable routing. For additional stability of the roof and base with heavy installed equipment. For mounting ◾ Command panels from 150 mm installation depth on ◾ IW worktops ◾ Horizontal surfaces (floors or ceilings) Attachment ◾ of command panels: With one-person assembly via machined keyholes ◾ on surfaces: Via external screws with cover Version Optipanel B= 418 mm 4321) Comfort Weight kg Model No. Panel 4351) 4.2 6528.410 1) From front panel width mm without keyboard housing, with keyboard housing on request Note: – With the Comfort Panel and Optipanel enclosures, the rectangular support arm cut-out may be selected, ordered and prepared using the command panel configurators at www.rittal.com Technical details: Available on the Internet Rotation range: – Max. 350°, lockable via clamping levers – By using additional M6 cheese-head screws, the rotation range may be limited to ±28°, ±73°, ±118°, ±163° Material: – Housing coupling: Cast aluminium/die-cast zinc – Reinforcement plate: Sheet steel, 6 mm Surface finish: – Housing coupling: Powder-coated, textured – Reinforcement plate: Zinc-plated Colour: – Housing coupling: RAL 7024 Supply includes: – Reinforcement plate – Seals – Assembly parts 160 Rittal Catalogue 34/Enclosures Support arm system CP 40/60/120/180 Pivot with/without jib ◾ For direct, vertically hinged integration into machines and systems ◾ Enclosure suspended or top-mounted ◾ With integral rotation range restrictor ◾ To fit enclosures with mounting cut-out Ø 130 mm Tilting adaptor +/–45° for command panels with support arm connection Ø 130 mm For mounting between: ◾ Coupling CP 60, 6206.300 ◾ Coupling CP 120, 6212.300 or ◾ Mounting bracket CP 60, 6206.320 ◾ Mounting bracket CP 120, 6212.320 or ◾ Angle coupling 90°, CP 60, 6206.380 ◾ Angle coupling 90°, CP 120, 6212.380 and the command panel Colour RAL Load capacity N Model No. – 7024 700 6016.700 200 7024/7035 700 6016.600 Jib length mm Technical details: Available on the Internet Weight kg Model No. 1.2 6206.420 Technical details: Available on the Internet Tilt angle: – Adjustable in 7.5° increments Material: – Tilting adaptor: Cast aluminium – Concertina section: Plastic Colour: – Tilting adaptor: RAL 7035 – Concertina section: RAL 7024 Supply includes: – Seals – Concertina section – Assembly parts Rittal Catalogue 34/Enclosures 161 Support arm system CP 40/60/120/180 Tilting adaptor +100°/–60° Weight kg Model No. for command panels with support arm connection ▭ 120 x 65 mm 0.8 6206.460 For mounting on ◾ IW worktop, prepared for enclosure attachment Ø 130 mm ◾ Surfaces ◾ Attachment/coupling with support arm connection ▭ 120 x 65 mm Technical details: Available on the Internet To fit enclosures up to 20 kg with support arm connection ◾ ▭ 90 x 71 mm ◾ Ø 130 mm ◾ ▭ 120 x 65 mm ◾ VESA Standard 75 With cable tube for protected cable entry. Tilt angle: – Adjustable in 7.2° increments via clamping lever and may be limited to +100°/-15° using the stop screw supplied loose. Material: – Tilting adaptor: Sheet steel, spray-finished – Concertina section: Plastic Colour: – Tilting adaptor: RAL 7035 – Concertina section: RAL 7024 Supply includes: – Concertina section – Assembly parts 162 Rittal Catalogue 34/Enclosures Stand systems for support arm system CP 60/120 163 Stand systems Comfort Panel Page 124 Optipanel Page 126 Compact Panel Page 133 Operating housing with handle strips Page 130 Pedestal, modular, consisting of: ◾ Pedestal base plate/cross member ◾ Support section ◾ Enclosure connection Colour: – RAL 7035 Technical details: Available on the Internet Photo shows a configuration example with equipment not included in the scope of supply Pedestal, modular 3 2 1 Weight load kg 15 18 Pedestal base plate 351) 351) Pedestal base plate/cross member 6146.100 6106.100 6106.200 6106.400 Width 400 400 490 600 Height 10 108 100 205 Depth 400 400 600 550 6146.200 – – – – 6206.100 6206.1001) 6206.1001) – 6106.110 – Attachment CP 40, steel, for support arm connection ▭ 90 x 71 mm 6501.070 – – – Coupling CP 40, steel, for support arm connection ▭ 90 x 71 mm 6501.050 – – – Coupling CP 40, steel, for support arm connection ▭ 120 x 65 mm 6501.130 – – – – – 6206.320 6206.320 6206.360 Dimensions mm Support section Height-adjustable (adjustment range 732 – 1122 mm) Closed, length 1000 mm Model No. Enclosure connection Enclosure reinforcement, rigid Attachment CP 60, for support arm connection Ø 130 mm Page Model No. Model No. – Attachment CP 60, for support arm connection ▭ 120 x 65 mm – – 6206.360 Coupling CP 60, for support arm connection Ø 130 mm – – 6206.300 – Coupling CP 60, for support arm connection ▭ 120 x 65 mm – – 6206.340 – 6146.300 – – – Twin castors 6148.000 – 6148.000 ◾ 522 Levelling feet – – 4612.000 – 521 Base mounting bracket – – 1590.000 – 587 Tilt adjustment Accessories 1) Alternative: Support arm system CP 120 may also be used by simply drilling a hole. Weight capacity 50 kg. 164 Rittal Catalogue 34/Enclosures Stand systems Comfort Panel Page 124 Optipanel Page 126 Compact Panel Page 133 Operating housing with handle strips Page 130 The right system to suit any application: ◾ A range of design variants ◾ Weight load from 15 – 25 kg ◾ Reliable protection of cable management Colour: – RAL 7035 Technical details: Available on the Internet Photo shows a configuration example with equipment not included in the scope of supply Pedestal, complete Weight capacity kg 25 25 15 6106.300 6141.200 6135.000 Width mm 600 600 360 Height mm 1093 946 995 Depth mm 660 660 500 Cross member ◾ ◾ – Base plate – – ◾ Model No. Page Supply includes Support section ◾ – ◾ Vertical aluminium panel moulding, may be opened ◾ ◾ – Worktop attachment – ◾ – Twin castors 6148.000, 7495.000 6148.000, 7495.000 – 522 Levelling feet 4612.000 4612.000 – 521 Accessories Base mounting bracket 6147.000 6147.000 – 167 Trim panel for pedestal 6144.100 6144.100 – 167 Attachment CP 60, for support arm connection Ø 130 mm 6206.320 – – 147 Attachment CP 60, for support arm connection ▭ 120 x 65 mm 6206.360 – – 147 Coupling CP 60, for support arm connection Ø 130 mm 6206.300 – – 147 Coupling CP 60, for support arm connection ▭ 120 x 65 mm 6206.340 – – 147 – 6902.310 – Worktop without handle1) 1) W x H x D 950 x 38 x 600 mm Rittal Catalogue 34/Enclosures 165 Stand systems Comfort Panel Page 124 Optipanel Page 126 Compact Panel Page 133 Operating housing with handle strips Page 130 The welded alternatives to the pedestal, complete ◾ Open pedestal for retrospective cable entry with preassembled connectors ◾ Pillar, small: For heavy installed equipment Material: – Steel Technical details: Available on the Internet Surface finish: – Spray-finished Photo shows a configuration example with equipment not included in the scope of supply Colour: – RAL 7035 Pedestal, open/pillar, small Weight load kg 40 80 6106.500 6112.500 Width 400 500 Height 10 12 Depth 400 500 1095 1150 Attachment CP 60, for support arm connection Ø 130 mm 6206.320 – Attachment CP 60, for support arm connection ▭ 120 x 65 mm 6206.360 – 147 Coupling CP 60, for support arm connection Ø 130 mm 6206.300 – 147 Coupling CP 60, for support arm connection ▭ 120 x 65 mm Model No. Page Supply includes Base plate cross section mm Overall height mm Accessories 147 6206.340 – 147 Attachment CP 120, for support arm connection Ø 130 mm – 6212.320 151 Coupling CP 120, for support arm connection Ø 130 mm – 6212.300 151 166 Rittal Catalogue 34/Enclosures Stand systems Accessories Base mounting bracket Packs of Model No. Brackets for screw-fastening from below to the cast feet with posidrive raised countersunk screws M12. Optionally with projection at the front, interior or sides, with Ø 11 mm hole for screw-fastening to the base. 4 pc(s). 6147.000 Trim panel Colour RAL Model No. Material: – Cast aluminium 7035 textured 6144.100 Material: – Steel Surface finish: – Zinc-plated Supply includes: – Posidrive raised countersunk screws M12 Supply includes: – Assembly parts for screw-fastening between the cast feet at the front or rear Enclosure reinforcement For external or internal reinforcement of enclosures of a corresponding size. Smaller enclosures may also be mounted directly without reinforcement. Technical details Available on the Internet Supply includes: – Assembly parts for the enclosure and support section plus 2 seals 1 For enclosure Support arm connection Material Weight kg Model No. B1 ≥ 300 mm, T1 ≥ 150 mm CP 40, stainless steel Stainless steel 1.4301 0.9 6143.310 B1 ≥ 300 mm, T1 ≥ 150 mm CP 60 Sheet steel 0.9 6106.110 2 Rittal Catalogue 34/Enclosures 167 168 Rittal Catalogue 34/Enclosures Hygienic Design Small and compact enclosures HD Terminal boxes HD .....................................................................................170 Compact enclosures HD.............................................................................171 Accessories ................................................................................................172 Rittal Catalogue 34/Enclosures 169 Hygienic Design HD accessories Page 172 System accessories Page 507 KL stainless steel Page 177 Protection category IP to IEC 60 529: – IP 66 Protection category IP to DIN 40 050-9: – IP 69K Protection category NEMA: – NEMA 13 – NEMA 3R – NEMA 4X Supply includes: – Enclosure of all-round solid construction – Cover – Mounting bracket (pre-assembled) – Seal and quick-release locks (supplied loose) T B2 H2 Surface finish: – Enclosure and cover: Brushed, grain 400, peak-to-valley height < 0.8 μm – Seal: Blue, dyed (RAL 5010) – Mounting plate: Zinc-plated H1 Material: – Enclosure and cover: Stainless steel 1.4301 (AISI 304) 1.5 mm – Mounting bracket: Sheet steel, zinc-plated, passivated, 2.0 mm – Quick-release fasteners: Stainless steel – Seal: Silicone, compliant with FDA Guideline 21 CFR 177.2600 B1 Technical details: Available on the Internet Terminal boxes HD Width (front) (B1) mm 150 150 200 300 400 400 Width (rear) (B2) mm 172 177 227 327 427 427 Height (front) (H1) mm 150 150 200 200 200 300 Height (rear) (H2) mm 172 177 227 227 227 327 Depth (T) mm 80 120 120 120 120 120 1670.600 1671.600 1672.600 1674.600 1675.600 1676.600 Model No. Packs of 1 pc(s). Page Accessories Wall spacer bracket HD 1 pc(s). 4000.100 4000.100 4000.100 4000.100 4000.100 4000.100 172 Mounting plates 1 pc(s). 1560.700 1560.700 1562.700 1563.700 1564.700 1568.700 591 Support rails TS 35/7.5 10 pc(s). 2314.000 2314.000 2315.000 2316.000 2317.000 2317.000 614 see page see page see page see page see page see page 659 Cable gland HD 170 Rittal Catalogue 34/Enclosures Hygienic Design HD accessories Page 172 System accessories Page 507 AE stainless steel Page 179 Rails for interior installation HD Page 173 Surface finish: – Enclosure and door: Brushed, grain 400, peak-to-valley height < 0.8 μm – Mounting plate: Zinc-plated – Seal: Blue, dyed (RAL 5010) F Protection category IP to IEC 60 529: – IP 66 Approvals: – UL – cUL Protection category IP to DIN 40 050-9: – IP 69K Technical details: Available on the Internet G B H1 Protection category NEMA: – NEMA 13 – NEMA 4X H2 Material: – Enclosure and door: Stainless steel 1.4301 (AISI 304) – Mounting plate: Sheet steel – Lock inserts HD: Stainless steel 1.4404 (AISI 316L) – Seal: Silicone, compliant with FDA Guideline 21 CFR 177.2600 T Supply includes: – Enclosure of all-round solid construction – Door with press-fitted seal – Interchangeable door hinge – Mounting plate Compact enclosures HD Width (B) mm 220 390 390 510 610 610 810 810 Height (front) (H1) mm 350 430 650 550 430 650 1050 1250 Height (rear) (H2) mm 437 549 769 669 601 769 1221 1421 Depth (T) mm 155 210 210 210 300 210 300 300 Mounting plate width (F) mm 162 334 334 449 549 549 739 740 Mounting plate height (G) mm 275 355 570 470 355 570 955 1155 Model No. Packs of Page 1 pc(s). 1302.600 1306.600 1308.600 1307.600 1320.600 1310.600 1316.600 1317.600 1 pc(s). 4000.100 4000.100 4000.100 4000.100 4000.100 4000.100 4000.100 4000.100 172 see page 659 Accessories Wall spacer bracket HD Cable gland HD Rittal Catalogue 34/Enclosures see page see page see page see page see page see page see page 171 Hygienic Design Accessories Levelling feet HD Benefits: ◾ Minimal cleaning time, due to fully covered, permanently sealed threads ◾ Compensation of floor inclines up to an angle of 10° thanks to flexible base plate ◾ Baying is even possible on sloping floors, thanks to a large levelling range of 55 mm Thread Levelling range mm M12 120 – 175 Base mount Packs Model No. of without 4 pc(s). 4000.200 with 4 pc(s). 4000.210 Load capacity: – Max. 5000 N static per levelling foot Material: – Stainless steel 1.4301 (AISI 304) Supply includes: – Assembly parts and seals Wall spacer bracket HD Benefits: ◾ Creates space for cleaning behind the enclosure ◾ Shorter assembly times by eliminating the need for an all-round seal ◾ Greater hygiene safety by avoiding an uncontrollable dead space or gap between the enclosure and wall Wall distance mm Packs of Model No. 50 1 pc(s). 4000.100 Mounting alternatives: Attachment from inside Ø Functional principle: ◾ Mounting on the wall optionally from the enclosure interior via a through-hole (max. M8) or from the rear via an integral M10 thread Material: – Stainless steel 1.4301 (AISI 3304) 50 Attachment from outside 15 34 M10 x ... 64 M8 x ... Supply includes: – Assembly parts and seals Enclosure key HD Packs of Model No. 1 pc(s). 2549.600 Bit HD Packs of Model No. for universal key 2549.500 See page 573 1 pc(s). 2549.510 Cam lock HD Packs of Model No. Hygienic Design variant for easy, safe cleaning. 1 pc(s). 2304.010 Applications: ◾ Compact enclosures AE stainless steel (except 1017.XXX and 1019.XXX). ◾ May be integrated into customised applications, e.g. covers of machine panels Accessories: – Enclosure key HD, see page 172 Material: – Stainless steel 1.4404 (AISI 316L) 172 Rittal Catalogue 34/Enclosures Hygienic Design Accessories Rails for interior installation for compact enclosures HD For mounting on the existing threaded bolts. With TS system punchings on three sides. Material: – Sheet steel, zinc-plated Length mm Packs of Model No. Page 510 4 pc(s). 5001.050 605 710 4 pc(s). 5001.051 605 910 4 pc(s). 5001.052 605 1110 4 pc(s). 5001.053 605 Supply includes: – Assembly parts Interior installation, door 1 2 Enclosure Model No. 1316.600 1317.600 Model No. 5001.052 5001.050 5001.050 5001.053 5001.051 5001.050 5001.051 5001.050 Interior installation, enclosure Enclosure Rails for interior installation TS punched section with mounting flange 17 x 73 mm Mounting plates Model No. Model No. 1308.600 1310.600 5001.050 – – 1316.600 5001.052 8612.130 (only on lock side) 8612.400 8612.410 1317.600 5001.053 8612.130 (only on lock side) 8612.400 8612.410 3 Rittal Catalogue 34/Enclosures Model No. 173 174 Rittal Catalogue 34/Enclosures Stainless steel Small enclosures Switch housings .........................................................................................176 Terminal boxes KL......................................................................................177 Bus enclosures BG.....................................................................................178 Compact enclosures Compact enclosures AE .............................................................................179 Enclosure systems Baying systems TS 8 ..................................................................................182 Baying systems TS 8, IP 66/NEMA 4X........................................................183 System enclosures SE 8 .............................................................................184 System enclosures SE 8, IP 66/NEMA 4X...................................................185 One-piece consoles....................................................................................186 PC enclosure systems ................................................................................187 Command panels Premium Panel IP 69K................................................................................188 Command panel housings with door ..........................................................189 Support arm system Support arm system CP 40 ........................................................................140 Rittal Catalogue 34/Enclosures 175 Switch housings System accessories Page 507 Material: – Enclosure: Stainless steel 1.4301 (AISI 304) – Cover: Stainless steel 1.4301 (AISI 304), all-round foamed-in PU seal Surface finish: – Enclosure and cover: Brushed, grain 240 Supply includes: – Enclosure with cover – Quick-release fasteners Protection category IP to IEC 60 529: – IP 66 Technical details: Available on the Internet R R Protection category NEMA: – NEMA 4X Stainless steel Width mm Packs of Height mm Depth mm Material thickness - enclosure mm Material thickness - cover mm 100 160 220 280 100 100 100 100 90 90 90 90 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 2384.010 2384.020 2384.030 2384.040 Pitch pattern (R) mm – 60 60 60 No. of switch cut-outs Ø 22.5 mm 1 2 3 4 Number of quick-release fasteners 2 4 4 4 Model No. 1 pc(s). Page Accessories Wall mounting bracket 4 pc(s). 1594.000 1594.000 1594.000 1594.000 587 Pressure relief stoppers 5 pc(s). 2459.500 2459.500 2459.500 2459.500 533 see page see page see page see page 659 5 pc(s). 2570.100 2570.100 2570.100 2570.100 646 see page see page see page see page 644 – 2314.000 2315.000 2315.000 614 Cable gland HD Earthing kit Earth straps Support rails TS 35/7.5 176 10 pc(s). Rittal Catalogue 34/Enclosures Terminal boxes KL System accessories Page 507 KL sheet steel Page 30 KL for potentially explosive areas Page 192 KL Hygienic Design Page 170 Material: – Enclosure: Stainless steel 1.4301 (AISI 304) – Cover: Stainless steel 1.4301 (AISI 304), all-round foamed-in PU seal Surface finish: – Enclosure and cover: Brushed, grain 180 Protection category IP to IEC 60 529: – IP 66 Protection category NEMA: – NEMA 4X Supply includes: – Enclosure with cover – Quick-release fastener including plastic bushes Approvals: – UL – CSA – TÜV – Germanischer Lloyd – Russian Maritime Register of Shipping – Lloyds Register of Shipping – Bureau Veritas – VDE Technical details: Available on the Internet Stainless steel Width mm Packs of Height mm Depth mm Material thickness - enclosure mm Material thickness - cover mm Model No. 1 pc(s). Weight kg Number of quick-release fasteners 150 150 300 200 200 150 150 150 200 200 80 120 80 80 120 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1521.010 1527.010 1522.010 1523.010 1528.010 1.3 1.6 1.8 1.8 2.2 4 4 4 4 4 Page Accessories Mounting plates 1 pc(s). 1560.700 1560.700 1561.700 1562.700 1562.700 591 Wall mounting bracket 4 pc(s). 1594.000 1594.000 1594.000 1594.000 1594.000 587 Wall angle 4 pc(s). 2583.010 2583.010 2583.010 2583.010 2583.010 588 Pole clamp 1 set(s) 2584.000 2584.000 2584.000 2584.000 2584.000 589 Support rails TS 35/7.5 10 pc(s). 2314.000 2314.000 2316.000 2315.000 2315.000 614 Cover hinge 2 pc(s). 1592.010 1592.010 1592.010 1592.010 1592.010 574 Pressure relief stoppers 5 pc(s). 2459.500 2459.500 2459.500 2459.500 2459.500 533 Packs of 300 300 400 300 400 Page 200 200 200 300 300 Stainless steel Width mm Height mm Depth mm Material thickness - enclosure mm Material thickness - cover mm Model No. 1 pc(s). Weight kg Number of quick-release fasteners 80 120 120 120 120 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1524.010 1529.010 1525.010 1526.010 1530.010 2.4 2.9 3.6 3.9 4.6 4 4 4 4 4 Accessories Mounting plates 1 pc(s). 1563.700 1563.700 1564.700 1567.700 1568.700 591 Wall mounting bracket 4 pc(s). 1594.000 1594.000 1594.000 1594.000 1594.000 587 Wall angle 4 pc(s). 2583.010 2583.010 2583.010 2583.010 2583.010 588 Pole clamp 1 set(s) 2584.000 2584.000 2584.000 2584.000 2584.000 589 Support rails TS 35/7.5 10 pc(s). 2316.000 2316.000 2317.000 2316.000 2316.000 614 Cover hinge 2 pc(s). 1592.010 1592.010 1592.010 1592.010 1592.010 574 Pressure relief stoppers 5 pc(s). 2459.500 2459.500 2459.500 2459.500 2459.500 533 Rittal Catalogue 34/Enclosures 177 Bus enclosures BG System accessories Page 507 BG sheet steel Page 36 Material: – Enclosure: Stainless steel 1.4301 (AISI 304) – Cover: Stainless steel 1.4301 (AISI 304), all-round foamed-in PU seal – 180° hinges: Die-cast zinc Surface finish: – Enclosure and cover: Brushed, grain 240 – 180° hinges: chrome-plated Supply includes: – Enclosure with cover – 180° hinges (2) – Support rail TS 35/7.5 Approvals: – UL – cUL – CSA – TÜV – Lloyds Register of Shipping – Bureau Veritas – VDE Protection category IP to IEC 60 529: – IP 66 Protection category NEMA: – NEMA 4X Technical details: Available on the Internet Stainless steel Width mm Packs of Height mm Depth mm Material thickness - enclosure mm Material thickness - door mm Model No. 1 pc(s). Weight kg Design support rail Door hinge 200 300 400 400 600 300 300 300 200 200 80 80 80 123 123 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1583.010 1584.010 1585.010 1558.010 1559.010 2.8 3.7 4.5 4.5 6.0 adjustable on profile strip – – – ◾ ◾ attached to studs ◾ ◾ ◾ – – bottom – – – ◾ ◾ right/left ◾ ◾ ◾ – – 2 2 2 2 3 Number of quick-release fasteners Page Accessories Wall mounting bracket 4 pc(s). 1594.000 1594.000 1594.000 1594.000 1594.000 587 Pole clamp 1 set(s) 2584.000 2584.000 2584.000 2584.000 2584.000 589 Condensate discharge 6 pc(s). 2459.000 2459.000 2459.000 2459.000 2459.000 533 Pressure relief stoppers 5 pc(s). 2459.500 2459.500 2459.500 2459.500 2459.500 533 178 Rittal Catalogue 34/Enclosures Compact enclosures AE System accessories Page 507 AE sheet steel Page 46 Hygienic Design Page 171 Surface finish: – Enclosure and door: Brushed, grain 240 – Mounting plate: Zinc-plated Approvals: – UL – CSA – TÜV – Germanischer Lloyd – Russian Maritime Register of Shipping – Lloyds Register of Shipping – Bureau Veritas – VDE F T B G Supply includes: – Enclosure with door(s) – Mounting plate Please note the product-specific scope of supply. H Material: – Enclosure: Stainless steel – Door: Stainless steel, all-round foamed-in PU seal – Mounting plate: Sheet steel Technical details: Available on the Internet Stainless steel Width (B) mm 200 200 200 300 380 380 Height (H) mm 300 300 300 300 300 300 Depth (T) mm 120 155 155 210 155 210 Mounting plate width (F) mm 162 162 162 254 344 334 Mounting plate height (G) mm 275 275 275 275 275 275 Stainless steel 1.4301 (AISI 304) ◾ – ◾ ◾ ◾ ◾ Stainless steel 1.4404 (AISI 316L) – ◾ – – – – Die-cast zinc, nickel-plated ◾ – ◾ ◾ ◾ ◾ Material Material of lock Packs of Stainless steel 1.4404 (AISI 316L) Model No. 1 pc(s). Weight kg – ◾ – – – – 1001.600 1002.500 1002.600 1003.600 1004.600 1011.600 3.6 4.1 4.1 6.9 7.4 8.4 IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 NEMA 4X NEMA 4X NEMA 4X NEMA 4X NEMA 4X NEMA 4X Door(s) 1 1 1 1 1 1 Cam lock 1 1 1 1 1 2 3-point lock system – – – – – – Protection category IP to IEC 60 529 Protection category NEMA Page Product-specific scope of supply Accessories Rails for interior installation 4 pc(s). – – – 2383.210 – 2383.210 605 Rain canopies, stainless steel 1 pc(s). – 2470.000 2470.000 2361.000 2471.000 2472.000 580 Wall mounting bracket 4 pc(s). 2433.000 2433.500 2433.000 2433.000 2433.000 2433.000 587 Wall angle 4 pc(s). 2583.010 2583.010 2583.010 2583.010 2583.010 2583.010 588 Pole clamp 1 set(s) 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 589 Cam locks 1 pc(s). 2304.000 2304.000 2304.000 2304.000 2304.000 2304.000 570 Cam lock HD 1 pc(s). Lock systems Rittal Catalogue 34/Enclosures 2304.010 2304.010 2304.010 2304.010 2304.010 2304.010 172 from page from page from page from page from page from page 563 179 Compact enclosures AE Stainless steel Width (B) mm 300 300 380 380 600 400 Height (H) mm 380 380 380 380 380 500 Depth (T) mm 210 210 210 210 210 210 Mounting plate width (F) mm 275 275 334 334 549 354 Mounting plate height (G) mm 334 334 355 355 355 475 Stainless steel 1.4301 (AISI 304) – ◾ – ◾ ◾ ◾ Stainless steel 1.4404 (AISI 316L) ◾ – ◾ – – – Die-cast zinc, nickel-plated – ◾ – ◾ ◾ ◾ Material Material of lock Packs of Stainless steel 1.4404 (AISI 316L) Model No. 1 pc(s). Weight kg ◾ – ◾ – – – 1005.500 1005.600 1006.500 1006.600 1009.600 1015.600 8.4 8.4 9.8 9.8 14.6 12.9 IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 NEMA 4X NEMA 4X NEMA 4X NEMA 4X NEMA 4X NEMA 4X Door(s) 1 1 1 1 1 1 Cam lock 1 1 1 1 1 2 3-point lock system – – – – – – Protection category IP to IEC 60 529 Protection category NEMA Page Product-specific scope of supply Accessories Rails for interior installation 4 pc(s). 2383.210 2383.210 2383.210 2383.210 2383.210 2383.210 Rain canopies, stainless steel 1 pc(s). 2361.000 2361.000 2472.000 2472.000 2473.000 – 580 Wall mounting bracket 4 pc(s). 2433.500 2433.000 2433.500 2433.000 2433.000 2433.000 587 Wall angle 4 pc(s). 2583.010 2583.010 2583.010 2583.010 2583.010 2583.010 588 Pole clamp 1 set(s) 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 589 Cam locks 1 pc(s). 2304.000 2304.000 2304.000 2304.000 2304.000 2304.000 570 Cam lock HD 1 pc(s). Lock systems 605 2304.010 2304.010 2304.010 2304.010 2304.010 2304.010 172 from page from page from page from page from page from page 563 Page Stainless steel Width (B) mm 500 500 380 600 600 600 Height (H) mm 500 500 600 600 600 760 Depth (T) mm 210 300 210 210 210 210 Mounting plate width (F) mm 449 449 334 549 549 549 Mounting plate height (G) mm 470 470 570 570 570 730 Stainless steel 1.4301 (AISI 304) ◾ ◾ ◾ – ◾ ◾ Stainless steel 1.4404 (AISI 316L) – – – ◾ – – Die-cast zinc, nickel-plated ◾ ◾ ◾ – ◾ ◾ Material Material of lock Packs of Stainless steel 1.4404 (AISI 316L) Model No. 1 pc(s). – – – ◾ – – 1007.600 1013.600 1008.600 1010.500 1010.600 1012.600 Weight kg 15.7 18.4 15.1 23.5 23.5 30.2 Protection category IP to IEC 60 529 IP 66 IP 66 IP 66 IP 66 IP 66 IP 66 NEMA 4X NEMA 4X NEMA 4X NEMA 4X NEMA 4X NEMA 4X Door(s) 1 1 1 1 1 1 Cam lock 2 2 2 2 2 2 3-point lock system – – – – – – Protection category NEMA Product-specific scope of supply Accessories Rails for interior installation 4 pc(s). 2383.210 2383.300 2383.210 2383.210 2383.210 2383.210 605 Rain canopies, stainless steel 1 pc(s). 2362.000 – 2472.000 2473.000 2473.000 2473.000 580 Wall mounting bracket 4 pc(s). 2433.000 2433.000 2433.000 2433.500 2433.000 2433.000 587 Wall angle 4 pc(s). 2583.010 2583.010 2583.010 2583.010 2583.010 2583.010 588 Pole clamp 1 set(s) 2584.000 2584.000 2584.000 2584.000 2584.000 2584.000 589 Cam locks 1 pc(s). 2304.000 2304.000 2304.000 2304.000 2304.000 2304.000 570 Cam lock HD 1 pc(s). Lock systems 180 2304.010 2304.010 2304.010 2304.010 2304.010 2304.010 172 from page from page from page from page from page from page 563 Rittal Catalogue 34/Enclosures Compact enclosures AE Stainless steel Width (B) mm 760 800 1000 800 1000 1000 Height (H) mm 760 1000 1000 1200 1200 1200 Depth (T) mm 300 300 300 300 300 300 Mounting plate width (F) mm 704 739 939 740 940 940 Mounting plate height (G) mm 730 955 955 1155 1155 1155 Stainless steel 1.4301 (AISI 304) ◾ ◾ ◾ ◾ – ◾ Stainless steel 1.4404 (AISI 316L) – – – – ◾ – Die-cast zinc, nickel-plated ◾ ◾ ◾ – – – Stainless steel 1.4301 (AISI 304) – – – ◾ ◾ ◾ 1019.600 Material Material of lock Packs of Model No. 1014.600 1016.600 1018.600 1017.600 1019.500 Weight kg 1 pc(s). 42.5 52.9 71.0 61.5 76.0 76.0 Protection category IP to IEC 60 529 IP 66 IP 66 IP 55 IP 66 IP 55 IP 55 NEMA 4X NEMA 4X NEMA 12 NEMA 4X NEMA 12 NEMA 12 Door(s) 1 1 2 1 2 2 Cam lock 2 2 2 – – – 3-point lock system – – – ◾ ◾ ◾ Protection category NEMA Page Product-specific scope of supply Accessories Rails for interior installation 4 pc(s). 2383.300 2383.300 2383.300 2383.300 2383.300 2383.300 Rain canopies, stainless steel 1 pc(s). 2474.000 2475.000 2363.000 2475.000 2363.000 2363.000 580 Wall mounting bracket 4 pc(s). 2433.000 2433.000 2433.000 2433.000 2433.500 2433.000 587 Wall angle 4 pc(s). 2583.010 2583.010 2583.010 2583.010 2583.010 2583.010 588 – – – – – – 589 2304.000 2304.000 2304.000 – – – 570 Pole clamp Cam locks 1 pc(s). Cam lock HD 1 pc(s). Accessories Lock systems Rittal Catalogue 34/Enclosures 605 2304.010 2304.010 2304.010 – – – 172 from page from page from page from page from page from page 563 Cable gland HD see page 659 181 Baying systems TS 8 System accessories Page 507 Baying systems TS 8, sheet steel Page 62 EMC baying systems TS 8 Page 80 Approvals: – UL – CSA – TÜV – TÜV Mark – Germanischer Lloyd – Russian Maritime Register of Shipping – Lloyds Register of Shipping – Bureau Veritas – VDE Protection category NEMA: – NEMA 12 Supply includes: – Enclosure frame with door(s) – Roof – Gland plates – Rear panel – Mounting plate – 4 eyebolts – Lock: 3 mm double-bit F T B G Protection category IP to IEC 60 529: – IP 55 H Material and surface finish: – Enclosure frame: Stainless steel 1.4301 (AISI 304), 1.5 mm, uncoated – Roof: Stainless steel 1.4301 (AISI 304), 1.5 mm, exterior brushed, grain size 400 – Door: Stainless steel 1.4301 (AISI 304), 2 mm, exterior brushed, grain size 400 – Rear panel: Stainless steel 1.4301 (AISI 304), 1.5 mm, exterior brushed, grain size 400 – Gland plates: Stainless steel 1.4301 (AISI 304), 1.5 mm, uncoated – Mounting plate: Sheet steel, 3 mm, zinc-plated Technical details: Available on the Internet Note: – Due to the hardness of the material, we recommend using metal multi-tooth screws for the interior installation. Stainless steel Width (B) mm 800 1200 1200 800 600 800 1200 600 Height (H) mm 1800 1800 1800 1800 1800 2000 2000 2000 Depth (T) mm 400 400 500 500 500 600 600 600 Mounting plate width (F) mm 699 1099 1099 699 499 699 1099 499 Mounting plate height (G) mm 1696 1696 1696 1696 1696 1896 1896 1896 Model No. Packs of 1 pc(s). Door(s) Weight kg 2 support strips fitted in the enclosure depth Page 8454.600 8456.600 8453.600 8455.600 8457.600 8450.600 8451.600 8452.600 1 2 2 1 1 1 2 1 112.9 170.4 174.9 116.3 92.5 129.7 194.7 104.4 – – – – – ◾ ◾ ◾ Accessories Side panels, screw-fastened, stainless steel 2 pc(s). 8700.840 8700.840 8700.850 8700.850 8700.850 8700.060 8700.060 8700.060 534 Divider panel 1 pc(s). 8609.840 8609.840 8609.850 8609.850 8609.850 8609.060 8609.060 8609.060 537 Divider panel for module plates 1 pc(s). 8609.100 8609.100 8609.100 8609.130 8609.130 8609.130 538 Base/plinth trim panels, side, 100 mm 1 set(s) 8701.040 8701.040 8701.050 8701.050 8701.050 8701.060 8701.060 8701.060 518 Base/plinth components, front and rear, 100 mm 1 set(s) 8701.800 8701.200 8701.200 8701.800 8701.600 8701.800 8701.200 8701.600 518 Base/plinth trim panels, side, 200 mm 1 set(s) 8702.040 8702.040 8702.050 8702.050 8702.050 8702.060 8702.060 8702.060 518 Base/plinth components, front and rear, 200 mm 1 set(s) 8702.800 8702.200 8702.200 8702.800 8702.600 8702.800 8702.200 8702.600 518 – – Base/plinth trim, modular 4 pc(s). 2907.000 2907.000 2908.000 2908.000 2908.000 2913.000 2913.000 2913.000 518 Cable clamp rails 2 pc(s). 4192.000 4196.000 4196.000 4192.000 4191.000 4192.000 4196.000 4191.000 665 1 pc(s). 4118.000 4116.000 4116.000 4118.000 4116.000 4118.000 4116.000 4116.000 578 300 pc(s). 2486.300 2486.300 2486.300 2486.300 2486.300 2486.300 2486.300 2486.300 625 Sheet steel wiring plan pockets Metal multi-tooth screws System lights from page from page from page from page from page from page from page from page 634 Rail systems Levelling feet from page from page from page from page from page from page from page from page 605 4 pc(s). 4612.000 4612.000 4612.000 4612.000 4612.000 4612.000 4612.000 4612.000 521 Baying system from page from page from page from page from page from page from page from page 542 Door stay from page from page from page from page from page from page from page from page 578 Lock systems from page from page from page from page from page from page from page from page 563 182 Rittal Catalogue 34/Enclosures Baying systems TS 8 System accessories Page 507 Cable entry Page 650 Protection category NEMA: – NEMA 4X Supply includes: – Enclosure frame with door – Roof – Base, solid – Rear panel – Mounting plate – 4 eyebolts – Lock: 3 mm double-bit F T B G Protection category IP to IEC 60 529: – IP 66 H Material and surface finish: – Enclosure frame: Stainless steel 1.4301 (AISI 304), 1.5 mm, uncoated – Roof: Stainless steel 1.4301 (AISI 304), 1.5 mm, exterior brushed, grain size 400 – Door: Stainless steel 1.4301 (AISI 304), 2 mm, exterior brushed, grain size 400 – Rear panel: Stainless steel 1.4301 (AISI 304), 1.5 mm, exterior brushed, grain size 400 – Base: Stainless steel 1.4301 (AISI 304), 1.5 mm, uncoated – Mounting plate: Sheet steel, 3 mm, zinc-plated IP 66/NEMA 4X Width (B) mm Packs of 800 Height (H) mm 2000 Depth (T) mm 600 Mounting plate width (F) mm 699 Mounting plate height (G) mm 1896 Model No. 1 pc(s). Door(s) Page 8450.680 1 Accessories Side panels, screw-fastened, stainless steel 2 pc(s). 8700.060 534 Baying frame IP 66/NEMA 4, NEMA 4X 1 pc(s). 8700.010 535 Base/plinth trim panels, side, 100 mm 1 set(s) 8701.060 518 Base/plinth components, front and rear, 100 mm 1 set(s) 8701.800 518 Base/plinth trim panels, side, 200 mm 1 set(s) 8702.060 518 Base/plinth components, front and rear, 200 mm 1 set(s) 8702.800 518 Base/plinth trim, modular 4 pc(s). 2913.000 518 Quick-fit baying clamp, one-piece 6 pc(s). 8800.500 543 Baying clamp, horizontal 4 pc(s). 8800.400 543 Angular baying bracket 4 pc(s). 8800.430 545 Rail systems from page 605 Cable duct for vertical TS section see page 663 Cable duct see page 673 Cable clamp rails 2 pc(s). 4192.000 665 Sheet steel wiring plan pockets 1 pc(s). 4118.000 578 System lights from page 634 Lock systems from page 563 Rittal Catalogue 34/Enclosures 183 System enclosures SE 8 System accessories Page 507 SE 8 sheet steel Page 81 Protection category NEMA: – NEMA 12 Supply includes: – Enclosure, solid top and sides – Door(s) – R/h door hinge with single-door enclosures, may be swapped to opposite side – Rear panel, one-piece, detachable – Mounting plate – Gland plates – Lock: 3 mm double-bit Note: – Due to the hardness of the material, we recommend using metal multi-tooth screws for the interior installation. F T B Approvals: – UL – cUL G Material and surface finish: – Enclosure: Stainless steel 1.4301 (AISI 304), 1.5 mm, exterior brushed, grain size 400 – Door: Stainless steel 1.4301 (AISI 304), 2 mm, exterior brushed, grain size 400 – Rear panel: Stainless steel 1.4301 (AISI 304), 1.5 mm, exterior brushed, grain size 400 – Mounting plate: Sheet steel, 3 mm, zinc-plated – Gland plates: Stainless steel 1.4301 (AISI 304), 1.5 mm, uncoated Protection category IP to IEC 60 529: – IP 55 H The system enclosure is based on the TS 8 platform. System accessories for interior installation in the TS 8 design can be used without restrictions. Technical details: Available on the Internet Stainless steel Width (B) mm 600 600 800 800 1000 1200 Height (H) mm Packs of 1600 1800 1800 2000 1800 2000 Depth (T) mm 400 500 500 600 400 500 Mounting plate width (F) mm 499 499 699 699 899 1099 Mounting plate height (G) mm Model No. 1 pc(s). Door(s) Weight kg 1496 1696 1696 1896 1696 1896 5850.500 5851.500 5852.500 5853.500 5854.500 5855.500 1 1 1 1 1 2 87.0 99.0 121.0 139.0 133.0 196.0 Page Accessories Base/plinth trim panels, side, 100 mm 1 set(s) 8701.040 8701.050 8701.050 8701.060 8701.040 8701.050 518 Base/plinth components, front and rear, 100 mm 1 set(s) 8701.600 8701.600 8701.800 8701.800 8701.000 8701.200 518 Base/plinth trim panels, side, 200 mm 1 set(s) 8702.040 8702.050 8702.050 8702.060 8702.040 8702.050 518 Base/plinth components, front and rear, 200 mm 1 set(s) 8702.600 8702.600 8702.800 8702.800 8702.000 8702.200 518 Eyebolts 4 pc(s). Rail systems 4568.500 4568.500 4568.500 4568.500 4568.500 4568.500 586 from page from page from page from page from page from page 605 665 Cable clamp rails 2 pc(s). 4191.000 4191.000 4192.000 4192.000 4336.000 4196.000 Levelling feet 4 pc(s). 4612.000 4612.000 4612.000 4612.000 4612.000 4612.000 521 Sheet steel wiring plan pockets 1 pc(s). 4116.000 4116.000 4118.000 4118.000 4124.000 4116.000 578 625 Metal multi-tooth screws 2486.300 2486.300 2486.300 2486.300 2486.300 2486.300 System lights 300 pc(s). from page from page from page from page from page from page 634 Earth straps see page see page see page see page see page see page 644 Snap-on nut TS see page see page see page see page see page see page 618 Cable duct for vertical TS section see page see page see page see page see page see page 663 Door stay from page from page from page from page from page from page 578 Lock systems from page from page from page from page from page from page 563 184 Rittal Catalogue 34/Enclosures System enclosures SE 8 System accessories Page 507 SE 8 sheet steel Page 81 Protection category NEMA: – NEMA 4X Supply includes: – Enclosure, solid top and sides – Door(s) – Door hinged on the right, may be swapped to the left – Rear panel – Mounting plate – Base, solid – Lock: 3 mm double-bit Note: – Due to the hardness of the material, we recommend using metal multi-tooth screws for the interior installation. F T B Approvals: – UL – cUL G Material and surface finish: – Enclosure: Stainless steel 1.4301 (AISI 304), 1.5 mm, exterior brushed, grain size 400 – Door: Stainless steel 1.4301 (AISI 304), 2 mm, exterior brushed, grain size 400 – Rear panel: Stainless steel 1.4301 (AISI 304), 1.5 mm, exterior brushed, grain size 400 – Mounting plate: Sheet steel, 3 mm, zinc-plated – Base: Stainless steel 1.4301 (AISI 304), 1.5 mm, uncoated Protection category IP to IEC 60 529: – IP 66 H The system enclosure is based on the TS 8 platform. System accessories for interior installation in the TS 8 design can be used without restrictions. Technical details: Available on the Internet IP 66/NEMA 4X Width (B) mm 600 800 800 Height (H) mm 1600 1800 2000 Depth (T) mm 400 500 600 Mounting plate width (F) mm 499 699 699 Mounting plate height (G) mm 1496 1696 1896 5850.580 5852.580 5853.580 Model No. Packs of 1 pc(s). Page Accessories Base/plinth trim panels, side, 100 mm 1 set(s) 8701.040 8701.050 8701.060 518 Base/plinth components, front and rear, 100 mm 1 set(s) 8701.600 8701.800 8701.800 518 Base/plinth trim panels, side, 200 mm 1 set(s) 8702.040 8702.050 8702.060 518 Base/plinth components, front and rear, 200 mm 1 set(s) 8702.600 8702.800 8702.800 518 Eyebolts 4 pc(s). Rail systems 4568.500 4568.500 4568.500 586 from page from page from page 605 Cable clamp rails 2 pc(s). 4191.000 4192.000 4192.000 665 Sheet steel wiring plan pockets 1 pc(s). 4116.000 4118.000 4118.000 578 System lights from page from page from page 634 Earth straps see page see page see page 644 Metal multi-tooth screws 2486.300 2486.300 2486.300 625 Snap-on nut TS see page see page see page 618 Cable duct for vertical TS section see page see page see page 663 4583.500 4583.500 4583.500 578 from page from page from page 563 Door stay for escape routes Lock systems Rittal Catalogue 34/Enclosures 300 pc(s). 1 pc(s). 185 One-piece consoles System accessories Page 507 Monitors, keyboards Page 706/707 Climate control Page 307 One-piece consoles, sheet steel Page 115 Surface finish: – Enclosure, door, console lid and gland plates: Brushed, grain 120 – Mounting plate: Zinc-plated Protection category NEMA: – NEMA 12 Supply includes: – Enclosure, solid back and sides – Door or double door at front, with locking rod – Console lid with lid stay and cam lock latched in the enclosure – Locks with double-bit insert – Gland plates, divided – Mounting plate Approvals: – UL – CSA – TÜV – Germanischer Lloyd – Russian Maritime Register of Shipping – Lloyds Register of Shipping – VDE F B T2 G Protection category IP to IEC 60 529: – IP 55 H Material: – Enclosure: Stainless steel 1.4301 (AISI 304), 1.5 mm – Door or double door and console lid: Stainless steel 1.4301 (AISI 304), 2.0 mm – Mounting plate: Sheet steel, 3.0 mm T1 Technical details: Available on the Internet Stainless steel Width (B) mm 600 800 1000 1200 Height (H) mm Packs of 960 960 960 960 Depth, bottom (T1) mm 400 400 400 400 Depth, top (T2) mm 480 480 480 480 Mounting plate width (F) mm 530 730 930 1130 Mounting plate height (G) mm Model No. 1 pc(s). Door(s) Weight kg 780 780 780 780 2683.600 2684.600 2685.600 2686.600 1 1 2 2 52.0 65.2 79.5 90.3 Page Accessories Base/plinth, complete, 100 mm 1 pc(s). 2865.000 2869.000 2867.000 2870.000 519 Cable clamp rails 2 pc(s). 4191.000 4192.000 4336.000 4196.000 665 Support rails TS 35/15 6 pc(s). 4934.000 4935.000 4933.000 4937.000 614 Hose-proof hood see page see page see page see page 372 Lock systems from page from page from page from page 563 186 Rittal Catalogue 34/Enclosures PC enclosure systems System accessories Page 507 Monitors, keyboards Page 706/707 PC enclosure system, sheet steel Page 118 PC enclosure systems based on SE, stainless steel 1.4301 (AISI 304), for the secure accommodation of all your computer equipment, from the monitor, computer system, printer, keyboard to the mouse. Material: – Enclosure: Stainless steel 1.4301 (AISI 304), 1.5 mm – Rear door: Stainless steel 1.4301 (AISI 304), 2.0 mm – Gland plates: Stainless steel 1.4301 (AISI 304), 1.5 mm – Monitor field: Single-pane safety glass, 4 mm Surface finish: – Brushed, grain 400 Protection category IP to IEC 60 529: – IP 55 Supply includes: – Enclosure, solid top and sides – Rear door with locking rod – Glazed door at the top, latched from the inside – Component shelf – Keyboard drawer with swingdown front for handrest and mouse pad support – Lock insert, lock no. 3524 E – Bottom door with locking rod – Cam lock with 3 mm double-bit insert – Gland plates, divided Approvals: – UL – cUL Technical details: Available on the Internet Protection category NEMA: – NEMA 12 Stainless steel Width mm Packs of Height mm Depth mm Model No. 600 Page 1600 630 1 pc(s). Weight kg 4650.100 115.0 Accessories Base/plinth components, front and rear, 100 mm 1 set(s) 8701.600 Base/plinth trim panels, side, 100 mm 1 set(s) 8701.060 518 518 Levelling feet 4 pc(s). 2859.000 521 Base/plinth trim, modular 4 pc(s). 2913.000 518 Adaptor pieces, 482.6 mm (19") 4 pc(s). 8613.010 684 Component shelf, pull-out 1 pc(s). 6902.960 627 Cable clamp rails 2 pc(s). 4191.000 665 System lights from page 634 Lock systems from page 563 Rittal Catalogue 34/Enclosures 187 Premium Panel IP 69K System accessories Page 507 Support arm system CP 40 stainless steel Page 140 Hygienic Design Page 169 Benefits: – Resistant to high-pressure cleaning: (protection category IP 69K). The seal lies between two seals and is optimally compressed by the screw fastening. – Suitable for clean room use: Screw fastening to comply with high standards in the food industry. With plastic stoppers on the inside or hex screws on the outside. – Optimum EMC conditions: The labyrinth seal achieves a particularly high level of RF shielding of the enclosure. Material: – Stainless steel 1.4301 (AISI 304) Clean room class: – Air purity class 1 to DIN EN ISO 14 644-1 Surface finish: – Brushed, grain 240 Technical details: Available on the Internet Protection category IP to DIN 40 050-9: – IP 69K Stainless steel Width mm Packs of Height mm 530 Depth mm 120 Operating housing for panel width mm 482.6 Operating housing for panel height mm 310 Installation depth mm Model No. Support arm connection 188 Page 360 115 1 pc(s). 6681.000 Top or bottom (by rotating the enclosure) Rittal Catalogue 34/Enclosures Command panel housings with door System accessories Page 507 Support arm system CP 40 stainless steel Page 140 Hygienic Design Page 169 Surface finish: – Brushed, grain 240 Colour: – Handle strips: similar to RAL 5002 Supply includes: – Enclosure of all-round solid construction – Cut-out and reinforcement for support arm system CP 40 stainless steel – Fastener with guide plate – Door with sealing frame and side handle strips – Lock: 3 mm double-bit Protection category IP to IEC 60 529: – IP 66 Note: – The support arm connection and door hinge may be swapped over by rotating the enclosure – Matching mounting plates from compact enclosures AE may be used – 3 mm double-bit lock insert may be exchanged for 41 mm lock inserts, plastic handles and T handles, type C B T H Material: – Enclosure and door: Stainless steel 1.4301 (AISI 304) – Handle strips: Plastic approved for use with foodstuffs Approvals: – UL – cUL – TÜV Technical details: Available on the Internet Stainless steel Width (B) mm Packs of Height (H) mm Depth (T) mm Model No. 1 pc(s). Weight kg 300 400 400 600 300 300 400 400 150 150 150 150 6535.010 6536.010 6538.010 6539.010 6.3 7.5 8.8 12.1 Page Accessories Support rails TS 35/7.5 Lock systems Rittal Catalogue 34/Enclosures 10 pc(s). 2316.000 2317.000 2317.000 – 614 from page from page from page from page 563 189 190 Rittal Catalogue 34/Enclosures Ex enclosures Ex enclosures Stainless steel, empty enclosure with screw-fastened cover .......................192 Stainless steel, empty enclosure with hinged door ......................................193 Plastic, empty enclosure with hinged door ..................................................194 Rittal Catalogue 34/Enclosures 191 Ex enclosures System accessories Page 507 Material: – Enclosure: Stainless steel 1.4301 (AISI 304) – Cover: Stainless steel 1.4301 (AISI 304), all-round foamed-in silicone seal Surface finish: – Enclosure: Brushed, grain 240 Protection category IP to IEC 60 529: – IP 66 Supply includes: – Enclosure – Cover T B Certificates: – PTB 03 ATEX 1013U – IEC Ex PTB 09.0033U H Applications: – Zone 1 and 2 or 21 and 22 to 94/9/EC – Ambient temperature range: -30°C...+80°C – Protection type to EN 60 079: Equipment protection due to increased safety, equipment protection due to enclosure Approvals: – ATEX – IEC Technical details: Available on the Internet Stainless steel, empty enclosure with screw-fastened cover Width (B) mm Packs of Height (H) mm Depth (T) mm Model No. 1 pc(s). Weight kg 150 200 300 300 300 400 150 200 150 200 300 200 80 80 80 80 120 120 9301.000 9303.000 9302.000 9304.000 9306.000 9305.000 1.3 1.8 1.8 2.4 3.9 3.6 Page Accessories Mounting plates 1 pc(s). 1560.700 1562.700 1561.700 1563.700 1567.700 1564.700 591 Wall mounting bracket 4 pc(s). 1594.000 1594.000 1594.000 1594.000 1594.000 1594.000 587 Support rails TS 35/7.5 10 pc(s). 2314.000 2315.000 2316.000 2316.000 2316.000 2317.000 614 see page see page see page see page see page see page 644 Earth straps 192 Rittal Catalogue 34/Enclosures Ex enclosures System accessories Page 507 Surface finish: – Enclosure: Brushed, grain 240 – Mounting plate: Zinc-plated Protection category IP to IEC 60 529: – IP 66 Supply includes: – Enclosure – Door – Mounting plate F T B Certificates: – PTB 02 ATEX 1082U – IEC Ex PTB 09.0035U G Material: – Enclosure: Stainless steel 1.4301 (AISI 304) – Door: Stainless steel 1.4301 (AISI 304), all-round foamed-in silicone seal – Mounting plate: Sheet steel Approvals: – ATEX – IEC H Applications: – Zone 1 and 2 or 21 and 22 to 94/9/EC – Ambient temperature range: -30°C...+80°C – Protection type to EN 60 079: Equipment protection due to increased safety, equipment protection due to enclosure Technical details: Available on the Internet Stainless steel, empty enclosure with hinged door Width (B) mm 200 300 380 380 380 600 600 760 800 Height (H) mm 300 380 300 380 600 600 760 760 1000 Depth (T) mm 155 210 155 210 210 210 210 300 300 Mounting plate width (F) mm 162 334 334 334 334 549 549 704 739 Mounting plate height (G) mm 275 275 275 355 570 570 730 730 955 Model No. Packs of 1 pc(s). 9401.600 9409.600 9402.600 9403.600 9404.600 9405.600 9406.600 9407.600 9408.600 Cam lock with 3 mm double-bit insert 1 1 1 1 2 2 2 2 Reinforcement section in the door – – – – – ◾ ◾ ◾ ◾ 3.8 7.7 7.4 9.7 13.3 15.6 22.3 30.5 36.3 Weight kg Page 2 Accessories Wall mounting bracket 4 pc(s). Support rails TS 35/7.5 10 pc(s). 2315.000 2316.000 2433.000 2433.000 2433.000 2433.000 2433.000 2433.000 2433.000 2433.000 2433.000 – Rails for interior installation 4 pc(s). – 2383.210 – Support rails TS 35/15 10 pc(s). – – – Earth straps Rittal Catalogue 34/Enclosures – – – – – – 2383.210 2383.210 2383.210 2383.210 2383.300 2383.300 – – 2319.000 2319.000 – – see page see page see page see page see page see page see page see page see page 587 614 605 614 644 193 Ex enclosures System accessories Page 507 Colour: – RAL 9011 Supply includes: – Enclosure – Door – Mounting plate F T B Certificates: – PTB 03 ATEX 1011U – IEC Ex PTB 10.0011U G Material: – Fibre-glass-reinforced unsaturated polyester, surface resistance: < 109 Ω – Door: Fibre-glass-reinforced unsaturated polyester, surface resistance: < 109 Ω all-round foamed-in silicone seal – Mounting plate: Sheet steel, zinc-plated Approvals: – ATEX – IEC H Applications: – Zone 1 and 2 or 21 and 22 to 94/9/EC – Ambient temperature range: -30°C...+80°C – Protection type to EN 60 079: Equipment protection due to increased safety, equipment protection due to enclosure Technical details: Available on the Internet Protection category IP to IEC 60 529: – IP 66 Plastic, empty enclosure with hinged door Width (B) mm 200 250 300 400 400 500 600 600 800 Height (H) mm 300 350 400 400 600 500 600 800 1000 Depth (T) mm 150 150 200 200 200 300 200 300 300 Mounting plate width (F) mm 145 195 245 345 345 417 545 517 717 Mounting plate height (G) mm 250 300 350 350 550 450 550 750 950 Model No. Packs of 1 pc(s). 9201.600 9202.600 9203.600 9204.600 9205.600 9207.600 9206.600 9208.600 9209.600 Cam lock with 3 mm double-bit insert 1 2 2 2 2 2 2 – – 3-point locking rod – – – – – – – ◾ ◾ Reinforcement section in the door Weight kg Page – – – – – ◾ ◾ – – 3.7 4.6 6.0 6.5 11.5 12.9 15.9 24.3 39.0 Accessories Wall mounting bracket 4 pc(s). 9266.000 9266.000 9266.000 9266.000 9266.000 9266.000 9266.000 9266.000 9266.000 588 Threaded inserts M6 20 pc(s). 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 1482.000 625 Mounting plate adjustment bracket 4 pc(s). 594 Support rails TS 35/7.5 10 pc(s). 2315.000 – Support rails TS 35/15 10 pc(s). – Earth straps 194 1481.000 1481.000 1481.000 1481.000 1481.000 1491.000 1481.000 1491.000 1491.000 – 2316.000 2317.000 2317.000 – – – – – – 2318.000 2319.000 2319.000 – 614 – 614 see page see page see page see page see page see page see page see page see page 644 Rittal Catalogue 34/Enclosures Simple, one-person installation with the TS 8 195 196 Rittal Catalogue 34/Power distribution Power distribution Busbar systems Overview ....................................................................................................205 Mini-PLS busbar system (40 mm) ...............................................................206 RiLine shrouded busbar systems (60 mm) ..................................................212 RiLine fuse elements...................................................................................236 RiLine accessories......................................................................................251 Ri4Power Form 1-4 Overview ....................................................................................................267 Baying systems TS 8 ....................................................................................76 Installation accessories for modular front design .........................................552 Maxi-PLS busbar systems ..........................................................................268 Flat-PLS busbar systems............................................................................271 Connection components for Maxi-PLS/Flat-PLS.........................................274 Busbar systems (100/185/150 mm)............................................................278 Cover systems Form 1................................................................................281 Compartment configuration Form 1-4.........................................................283 Ri4Power accessories ................................................................................289 Ri4Power ISV distribution enclosures Overview ....................................................................................................297 Baying systems TS 8 ....................................................................................75 Installation kits for TS, SE ...........................................................................298 Installation kits for AE..................................................................................298 Installation modules ....................................................................................299 Accessories ................................................................................................304 Rittal Catalogue 34/Power distribution 197 nextlevel for industry Automate your processes. Computer-assisted switchgear engineering with Eplan and Power Engineering allows you to plan your switchgear in next to no time, and order the required components at the push of a button. Rittal – The System. ◾ Eplan – Efficient engineering ◾ Rittal – Power Engineering ◾ Rittal – Tested power distribution systems 198 Rittal Catalogue 34/Power distribution Rittal Catalogue 34/Power distribution 199 Power distribution from the smallest to the largest The tried-and-trusted, super-flexible power distribution system for individual requirements. From small power distribution, to individual switchgear and controlgear, through to heavy-current power distribution for infrastructure and industry applications. ◾ RiLine – Busbar systems and components for switchgear and controlgear ◾ Ri4Power – The modular system for low-voltage switchgear ◾ Ri4Power ISV – The modular distribution enclosure system for infrastructure power supply 200 Rittal Catalogue 34/Power distribution ◾ Design certificate to IEC 61 439 – Made easy with tested system solutions ◾ Increased planning confidence – Power Engineering ensures optimised designs Rittal Catalogue 34/Power distribution 201 Your benefits As a system supplier, Rittal is a leading global provider of tested system engineering solutions. Planning ◾ Eplan – Engineering tools ◾ Power Engineering with heat loss calculation ◾ Therm – Climate control design Enclosures ◾ Strength requirements (IEC 61 439) tested ◾ IP protection category tested ◾ Verified PE conductor function Busbars ◾ Short-circuit withstand strength ◾ Current carrying capacity ◾ Dielectric properties ◾ Clearance and creepage distances ◾ All verified in conjunction with the enclosure 202 Rittal Catalogue 34/Power distribution Climate control ◾ Cooling units Switchgear ◾ Rittal fuse technology ◾ Air cooling ◾ Protection devices, switch- ◾ Liquid cooling gear and controlgear from all well-known manufacturers Simple generation: Design certificates to IEC 61 439 Rittal Catalogue 34/Power distribution 203 204 Rittal Catalogue 34/Power distribution Busbar systems Mini-PLS busbar system (40 mm) Busbar supports.........................................................................................206 Special busbars E-Cu .................................................................................206 Contact hazard protection ..........................................................................206 Busbar connection adaptor ........................................................................206 Bus-mounting fuse base.............................................................................207 NH fuse-switch disconnector, size 000.......................................................207 Component adaptor up to 25 A..................................................................208 Component adaptor up to 100 A................................................................209 Allocation of switchgear ..............................................................................209 RiLine busbar systems (60 mm) Flat copper bar system ...............................................................................212 PLS busbar system ....................................................................................214 Busbar connection adaptor ........................................................................216 Busbar connection adaptor add-on kit........................................................218 OM adaptor up to 65 A, with connection cables .........................................219 OM adaptor up to 65 A, with tension spring clamps ...................................222 OM adaptor up to 25 A, with plug-in cable outlet........................................224 OM support ................................................................................................225 CB component adaptor up to 630 A, 3-pole...............................................226 CB component adaptor up to 500 A, 4-pole...............................................229 Allocation of switchgear ..............................................................................231 Bus-mounting fuse bases ...........................................................................236 NH fuse-switch disconnector, size 000.......................................................238 NH fuse-switch disconnector, size 00 to 3..................................................240 – with electronic fuse monitoring.................................................................242 – with electromechanical fuse monitoring....................................................244 NH slimline fuse-switch disconnectors, sizes 00 to 3 ..................................246 – with electronic fuse monitoring.................................................................248 Fuse holder 30 A to 400 A ..........................................................................249 RiLine accessories......................................................................................251 Rittal Catalogue 34/Power distribution 205 Mini-PLS busbar system (40 mm) Component adaptors Page 208 Fuse components Page 207 Busbar supports, busbar connection adaptors Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 – RAL 9011 (busbar connection adaptor chassis) Contact hazard protection Technical details: Available on the Internet Material: – Thermally modified hard PVC – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Mini-PLS busbar supports (3-pole) Busbar support, suitable for top mounting Packs of ◾ Bar centre distance mm 40 Approvals Model No. 4 pc(s). 9600.000 A Mini-PLS special busbars E-Cu, bar thickness 3 mm, bar cross-section 120 mm2 Length mm Packs of 500 700 1100 1500 3 pc(s). 9601.000 9602.000 9603.000 9624.000 Approvals A Model No. Accessories B B Busbar connectors Approvals Model No. 3 pc(s). 9611.000 Mini-PLS contact hazard protection Components C Approvals D C Base tray D Cover section E E End cover Length mm Packs of Model No. 500 1 pc(s). 9605.000 700 1 pc(s). 9606.000 1100 1 pc(s). 9607.000 250 1 pc(s). 9608.000 500 1 pc(s). 9609.000 – 2 pc(s). 9610.000 Mini-PLS busbar connection adaptors (3-pole) Rated current max. A Page Packs of Rated operating voltage V, ~ Cable outlet Connection of round conductors mm² Clamping area for laminated copper bars, W x H mm 63 250 690, 3~ 690, 3~ Top/bottom Top/bottom 1.5 – 35 10 – 120 10 x 8 17 x 15 Width mm 54 115 Height mm 160 182 9613.000 9612.000 ◾ ◾ Approvals Model No. 1 pc(s). Accessories Laminated copper bars 206 255 Rittal Catalogue 34/Power distribution Mini-PLS fuse elements Busbar system Page 206 Busbar connection adaptors Page 206 Component adaptors Page 208/209 Bus-mounting fuse base NH fuse-switch disconnector Busbar adaptor Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Material: – Fibreglass-reinforced polyamide – Fire protection corresponding to UL 94-V0 – Contact tracks: Silver-plated hard copper Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Colour: – Chassis: RAL 9011 – Cover: RAL 7035 Technical details: Available on the Internet Colour: – RAL 9011 Colour: – RAL 7035 Basis of test: – IEC 60 947-3 – IEC 60 269-2 (fuse inserts) Mini-PLS bus-mounting fuse base (3-pole) Fuse insert Packs of D 02-E18 Rated current max. A 63 Rated operating voltage V, ~ 400, 3~ Connection of round conductors mm² 1.5 – 16 Width mm 38 Height mm 160 Model No. 1 pc(s). 9630.000 NH fuse-switch disconnector size 000 (3-pole) Rated current max. A Packs of Rated operating voltage V, ~ 100 Cable outlet Top/bottom Type of connection Box terminal Connection of round conductors mm² 1.5 – 50 Clamping area for laminated copper bars, W x H mm 10 x 10 Width mm 89 Height mm 141.5 Model No. Page 690, 3~ 1 pc(s). 3431.000 238 Also required Mini-PLS busbar adaptors (3-pole) With connection cables mm² 35 Width mm 90 Height mm 160 Model No. 1 pc(s). 9629.100 5 pc(s). 3071.000 Accessories Micro-switch Rittal Catalogue 34/Power distribution 263 207 Mini-PLS component adaptor Busbar system Page 206 Busbar connection adaptors Page 206 Fuse components Page 207 Allocation of switchgear Page 209 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 – RAL 9011 (9629.000) Technical details: Available on the Internet Rated current max. 12 – 25 A Rated current max. A Packs of Rated operating voltage V, ~ Number of poles Connection cables Support rails quantity/height mm 12 25 25 25 25 25 25 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole AWG 14 AWG 12 AWG 12 AWG 12 AWG 12 AWG 12 AWG 12 1/7.5 1/7.5 1/7.5 1/15 1/7.5 1/15 1/7.5 Width mm 45 45 45 54 54 72 90 Height mm 160 160 160 160 160 160 160 9614.110 9614.100 9615.100 9614.000 9615.000 9625.000 9629.010 Page Approvals Model No. 1 pc(s). Accessories Insert strip Support rails, Height 7.5 mm 208 2 pc(s). 9623.000 9623.000 9623.000 9623.000 9623.000 9623.000 9623.000 258 Width 45 mm 10 pc(s). 9320.150 9320.150 9320.150 – – – 9320.150 258 Width 54 mm 10 pc(s). – – – 3548.000 3548.000 – – 258 Width 72 mm 10 pc(s). – – – – – 3549.000 – 258 Rittal Catalogue 34/Power distribution Mini-PLS component adaptor Rated current max. 40 – 100 A Rated current max. A Packs of Rated operating voltage V, ~ 40 40 40 100 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles Connection cables Page 3-pole 3-pole 3-pole 3-pole AWG 10 AWG 10 AWG 10 35 mm2 Support rails quantity/height mm 1/7.5 1/15 1/7.5 – Width mm 54 54 72 90 Height mm 160 160 160 160 9616.000 9617.000 9627.000 9629.000 Approvals Model No. 1 pc(s). Accessories Insert strip Support rails Height 7.5 mm Height 15 mm 2 pc(s). 9623.000 9623.000 9623.000 – 258 Width 54 mm 10 pc(s). 3548.000 3548.000 – – 258 Width 72 mm 10 pc(s). – – 3549.000 – 258 Width 72 mm 5 pc(s). – – – 9320.120 261 Allocation of switchgear – Mini-PLS component adaptors 12 A/25 A Make/model Model No. Make/model ABB Model No. Siemens MS116 MS325 MS450 (max. 25 A) MS451 (max. 25 A) 9614.100 9614.000 9614.000 9614.000 S0 3RV10 21... 3RV20 21... (up to 25 A) S00 3RV10 11... 3RV20 11... S2 3RV10 31... (up to 25 A) Eaton 9614.100 9614.100 9614.000 9614.100 9614.100 9614.000 PKZM0 (up to 25 A) PKZM01 (up to 25 A) PKZM4 (up to 25 A) PKE12 PKE32 (up to 25 A) PKE65 (up to 25 A) 1) 9614.100 9614.100 9614.1001) 9614.1001) 9614.000 Support rail must be offset Schneider Electric GV2-P (up to 25 A) GV2-RT GV2-LE10 GV3 (up to 25 A) 9614.100 9614.100 9614.100 9614.100 Allocation of switchgear – Mini-PLS component adaptors 40 A/100 A Make/model Model No. Accessories Model No. 9617.000 9629.000 9629.000 9629.000 9629.000 – 9320.120 9320.120 9320.120 9320.120 9629.000 9629.000 – – 9629.000 9627.000 9617.000 9629.000 – – – 9320.120 ABB MS450 (max. 40 A) MS451 (max. 40 A) MS495 MS496 MS497 Tmax T1 T2 Rittal Catalogue 34/Power distribution Model No. Accessories Model No. 9629.000 9616.000 9629.000 – – 9320.120 9616.000 9629.000 – 9320.120 9629.000 9320.120 Schneider Electric Eaton NZM 1 PKZ2 PKZM4 (max. 40 A) PKZM4 Make/model NS 80 GV3 (max. 40 A) GV3 Siemens S2 3RV10 31... (max. 40 A) 3RV10 31... S3 3RV1341/42 209 210 Rittal Catalogue 34/Power distribution RiLine Busbar systems 3 and 4-pole and DC Support + bars + contact hazard protection ◾ Flat copper bar system, see page 212 ◾ PLS busbar system, see page 214 ◾ Accessories, see page 251 Connection system 3 and 4-pole ◾ Busbar connection adaptor, see page 216 ◾ Connection clamps, see page 257 ◾ Connection block, see page 258 ◾ Accessories, see page 257 Component adaptor 3 and 4-pole ◾ OM adaptor, see page 219 ◾ Circuit-breaker component adaptor, see page 226 ◾ Accessories, see page 259 Fuse elements 3-pole ◾ Bus-mounting fuse bases, see page 236 ◾ NH fuse-switch disconnectors, see page 238 ◾ NH slimline fuse-switch disconnectors, see page 246 ◾ Fuse holders, see page 249 ◾ Accessories, see page 262 Rittal Power Engineering with update function Model No. 3020.500, see page 295 ◾ Configuration of RiLine busbar systems ◾ Simple component selection, integral switchgear database ◾ Automatic calculation of rated currents and heat losses Rittal Catalogue 34/Power distribution 211 RiLine shrouded busbar systems up to 800 A (60 mm) Busbar connection adaptors Page 216 Component adaptors Page 219 Fuse elements Page 236 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Note: – UL approval only valid in conjunction with AC applications – The use of a base tray is required for UL applications Technical details: Available on the Internet Flat copper bar system Busbar support Number of poles 3-pole 3-pole 3-pole 4-pole Bar centre distance mm 60 60 60 60 External attachment ◾ – – – Internal attachment – ◾ ◾ ◾ 12 x 5/10 ◾ ◾ – ◾ 15 x 5 – 25 x 10, 30 x 5 ◾ ◾ ◾ ◾ 30 x 10 ◾ ◾ ◾ ◾ 1000, 3~ 1000, 3~ 1000, 3~ 1000, 3~ – – 1500 (DC) – – – 4 pc(s). 9340.010 9340.000 9340.050 9340.004 ◾ ◾ – ◾ 12 pc(s). 9340.090 9340.090 – 9340.090 For busbars mm Packs of Rated operating voltage V, ~ Approvals Model No. Page Also required Spacers when using busbars 12 x 5/10 mm Model No. 212 251 Rittal Catalogue 34/Power distribution RiLine shrouded busbar systems up to 800 A (60 mm) Flat copper bar system Busbar support Number of poles Packs of 3-pole 3-pole 3-pole 4-pole 60 60 60 60 4 pc(s). 9340.010 9340.000 9340.050 9340.004 ◾ ◾ – ◾ 12 pc(s). 9340.090 9340.090 – 9340.090 251 Model No. Page Bar centre distance mm Model No. Page 212 Also required Spacer when using busbars 12 x 5/10 mm Model No. Contact hazard protection Length mm Components C B E F D Model No. – 2 pc(s). 9340.070 9340.070 9340.070 9340.074 – B Base trays 500 2 pc(s). – 9340.100 9340.100 – 256 700 2 pc(s). – 9340.110 9340.110 – 256 900 2 pc(s). – 9340.120 9340.120 – 256 1100 2 pc(s). – 9340.130 9340.130 9340.134 256 256 2400 A Approvals Packs of A End covers 1 pc(s). – 9340.170 – – C Base tray infills 100 – 2 pc(s). – 9340.140 9340.140 – 256 D Cover sections 700 2 pc(s). – 9340.200 9340.200 – 256 256 1100 2 pc(s). – 9340.210 9340.210 9340.214 E Support panels – 5 pc(s). – 9340.220 9340.220 9340.224 256 F Cross members 160 2 pc(s). – – 9340.230 – 256 Model No. Page – Busbars E-Cu; length: 2400 mm/bar Dimensions mm Max. rated current A acc. to DIN EN Approvals Packs of Model No. UL 508 12 x 5 210 – 6 pc(s). 3580.000 3580.000 3580.000 3580.000 252 12 x 10 340 – 6 pc(s). 3580.100 3580.100 3580.100 3580.100 252 15 x 5 260 175 6 pc(s). 3581.000 3581.000 3581.000 3581.000 252 15 x 10 360 350 6 pc(s). 3581.100 3581.100 3581.100 3581.100 252 20 x 5 319 230 6 pc(s). 3582.000 3582.000 3582.000 3582.000 252 20 x 10 497 465 25 x 5 384 290 30 x 5 447 350 30 x 10 800 700 – – 3 pc(s). 3585.005 3585.005 3585.005 3585.005 252 6 pc(s). 3583.000 3583.000 3583.000 3583.000 252 6 pc(s). 3584.000 3584.000 3584.000 3584.000 252 3 pc(s). 3586.005 3586.005 3586.005 3586.005 252 Model No. Page CUPONAL busbars; length: 2400 mm/bar Dimensions mm Max. rated current A acc. to Approvals Packs of Model No. DIN EN UL 508 20 x 5 235 – – 6 pc(s). – 3582.020 3582.020 – 252 20 x 10 363 – – 3 pc(s). – 3585.020 3585.020 – 252 30 x 5 328 – – 6 pc(s). – 3584.020 3584.020 – 252 30 x 10 493 – – 3 pc(s). – 3586.020 3586.020 – 252 Accessories Components Busbar connectors for single connection Busbar connectors for baying connection1) Busbar cover sections Length: 1000 mm/section 1) For busbars mm Model No. Page 12 x 5 – 15 x 10 Approvals Packs of 3 pc(s). 9350.075 Model No. 9350.075 9350.075 9350.075 254 20 x 5 – 30 x 10 3 pc(s). 9320.020 9320.020 9320.020 9320.020 254 20 x 5 – 30 x 10 3 pc(s). 9320.030 9320.030 9320.030 9320.030 254 12 x 5 – 30 x 10 10 pc(s). 3092.000 3092.000 3092.000 3092.000 253 12/15 x 5 4 pc(s). 9350.010 9350.010 9350.010 9350.010 253 12/15 x 10 4 pc(s). 9350.060 9350.060 9350.060 9350.060 253 Connection from enclosure to enclosure Rittal Catalogue 34/Power distribution 213 RiLine shrouded busbar systems 800 A/1600 A (60 mm) Connection systems Page 216 Component adaptors Page 219 Fuse elements Page 236 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Note: – UL approval only valid in conjunction with AC applications – The use of a base tray is required for UL applications Technical details: Available on the Internet PLS busbar system Busbar support PLS 1600 PLUS For Rittal system Packs of Number of poles PLS 800 PLS 1600 3-pole 3-pole 3-pole 3-pole 4-pole Bar centre distance mm 60 60 60 60 60 Internal attachment ◾ ◾ ◾ ◾ ◾ Busbar support, suitable for top mounting ◾ ◾ ◾ ◾ – 1000, 3~ 1000, 3~ 1000, 3~ 1000, 3~ 1000, 3~ – 1500 (DC) – 1500 (DC) – 9342.050 9342.004 Rated operating voltage V, ~ Approvals Model No. 214 – 4 pc(s). 9341.000 – 9341.050 9342.000 Rittal Catalogue 34/Power distribution RiLine shrouded busbar systems 800 A/1600 A (60 mm) PLS busbar system Busbar support PLS 1600 PLUS For Rittal system Packs of Number of poles PLS 800 3-pole Bar centre distance mm Model No. 4 pc(s). PLS 1600 3-pole 3-pole 3-pole Page 4-pole 60 60 60 60 60 9341.000 9341.050 9342.000 9342.050 9342.004 214 Contact hazard protection Length mm Components C B E F D Model No. Model No. Page A End covers – 2 pc(s). 9341.070 9341.070 9342.070 9342.070 9342.074 – B Base trays 500 2 pc(s). 9341.100 9341.100 9342.100 9342.100 – 256 700 2 pc(s). 9341.110 9341.110 9342.110 9342.110 – 256 900 2 pc(s). 9341.120 9341.120 9342.120 9342.120 – 256 1100 2 pc(s). 9341.130 9341.130 9342.130 9342.130 9342.134 256 256 2400 A Approvals Packs of 1 pc(s). 9341.170 – 9342.170 – – C Base tray infills 100 – 2 pc(s). 9341.140 9341.140 9342.140 9342.140 – 256 D Cover sections 700 2 pc(s). 9340.200 9340.200 9340.200 9340.200 – 256 256 1100 2 pc(s). 9340.210 9340.210 9340.210 9340.210 9340.214 E Support panels – 5 pc(s). 9340.220 9340.220 9340.220 9340.220 9340.224 256 F Cross members 160 2 pc(s). – 9340.230 – 9340.230 – 256 – PLS special busbars E-Cu Version Packs of Bar cross-section mm2 Bar thickness mm Max. rated current A acc. to Length mm DIN EN UL 508 For enclosure width mm Approvals PLS 800 PLS 1600 300 900 5 10 800 1600 700 1400 Model No. Model No. Page 495 600 3 pc(s). 3524.000 3527.000 695 800 3 pc(s). 3525.000 3528.000 253 253 895 1000 3 pc(s). 3525.010 3528.010 253 1095 1200 3 pc(s). 3526.000 3529.000 253 2400 variable 1 pc(s). 3509.000 3516.000 253 Page Accessories Components PLS busbar connectors Approvals Packs of Model No. Model No. Single connection 3 pc(s). 3504.000 3514.000 254 Baying connection1) 3 pc(s). 3505.000 3515.000 254 3 pc(s). 9320.060 9320.070 254 PLS expansion connectors2) 1) Connection from enclosure to enclosure 2) Two PLS busbar connectors (single connection) are required to fit one expansion connector Rittal Catalogue 34/Power distribution 215 Connection adaptors Busbar system Page 212 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Fuse elements Page 236 Material: – Cover: ABS – Chassis: Polyamide (PA 6.6) – Chassis 3439.010: Fibreglassreinforced, thermoplastic polyester (PBT) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Note: – The technical data may vary for UL applications – UL approval only applies in conjunction with AC application – The rated operating voltage for DC applications depends on the busbar arrangement in the busbar support 9340.050/ 9341.050/9342.050. Technical details: Available on the Internet Rated current max. 63 – 125 A Rated current max. A Packs of Rated operating voltage V, ~ 63 63 125 125 125 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 4~ Rated operating voltage (L1 + L2) V – 1000 (DC) – 1000 (DC) – Rated operating voltage (L1 + L3) V – 1500 (DC) – 1500 (DC) – 3-pole 3-pole 3-pole 3-pole 4-pole Number of poles Cable outlet Top Bottom Top/bottom Bottom Top/bottom Connection of round conductors, fine wire with wire end ferrule mm² 2.5 - 10 2.5 - 10 10 - 25 10 - 25 10 - 25 Connection of round conductors, multi-wire mm² 2.5 - 10 2.5 - 10 16 - 35 16 - 35 16 - 35 Connection of round conductors, single-wire mm² 2.5 - 10 2.5 - 10 – – – Clamping area for laminated copper bars, W x H mm – – 10 x 7.8 10 x 7.8 10 x 7.8 Clamping area for laminated copper bars, W x H (for 5 mm bar thickness) mm – – – – – Clamping area for laminated copper bars, W x H (for 10 mm bar thickness) mm – – – – – Width mm 20 20 55 55 75 Height mm 215 215 210 210 270 Approvals UL UL UR UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 60 5/10 5/10 5/10 5/10 5/10 9342.200 9342.210 9342.220 9342.240 9342.224 For bar thickness mm Model No. 1 pc(s). Page Accessories Laminated copper bars – – see page see page see page Connection adaptor expansion set – – – – – 216 255 Rittal Catalogue 34/Power distribution Connection adaptors Rated current max. 250 – 600 A Rated current max. A 250 250 250 600 690, 3~ 690, 3~ 690, 4~ 690, 3~ Rated operating voltage (L1 + L2) V – 1000 (DC) – – Rated operating voltage (L1 + L3) V – 1500 (DC) – – 3-pole 3-pole 4-pole 3-pole Rated operating voltage V, ~ Number of poles Cable outlet Top/bottom Bottom Top/bottom Top/bottom Connection of round conductors, fine wire with wire end ferrule mm² 35 - 120 35 - 120 35 - 120 35 - 240 Connection of round conductors, multi-wire mm² 35 - 120 35 - 120 35 - 120 35 - 240 – – – – 18.5 x 15.5 18.5 x 15.5 18.5 x 15.5 24 x 21 Clamping area for laminated copper bars, W x H (for 5 mm bar thickness) mm – – – – Clamping area for laminated copper bars, W x H (for 10 mm bar thickness) mm – – – – Connection of round conductors, single-wire Clamping area for laminated copper bars, W x H mm Width mm 90 90 118 180 Height mm 210 210 270 247 Approvals UL UL UL – For bar systems with centre-to-centre spacing mm 60 60 60 60 For bar thickness mm Model No. Packs of 5/10 5/10 5/10 5/10 9342.250 9342.270 9342.254 3439.010 1 pc(s). 1 pc(s). 1 pc(s). 1 set(s) see page see page see page see page – – – – Page Accessories Laminated copper bars Connection adaptor expansion set 255 Rated current max. 800 – 1600 A Rated current max. A 800 800 800 1600 690, 3~ 690, 3~ 690, 3~ 690, 3~ Rated operating voltage (L1 + L2) V – 1000 (DC) 1000 (DC) 1000 (DC) Rated operating voltage (L1 + L3) V – 1500 (DC) 1500 (DC) 1500 (DC) 3-pole 3-pole 3-pole 3-pole Top/bottom Top/bottom Bottom Top/bottom Connection of round conductors, fine wire with wire end ferrule mm² 95 - 185 95 - 185 95 - 185 – Connection of round conductors, multi-wire mm² 95 - 300 95 - 300 95 - 300 – – – – – 33 x 20 – 33 x 20 – – 33 x 26 – 65 x 27 Rated operating voltage V, ~ Number of poles Cable outlet Connection of round conductors, single-wire Clamping area for laminated copper bars, W x H mm Clamping area for laminated copper bars, W x H (for 5 mm bar thickness) mm Clamping area for laminated copper bars, W x H (for 10 mm bar thickness) mm Page – 33 x 21 – 65 x 22 Width mm 129 150 129 255 Height mm 246 210 246 210 Approvals UR UL UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 5/10 5/10 5/10 5/10 9342.280 9342.310 9342.300 9342.320 1 pc(s). 1 set(s) 1 pc(s). 1 set(s) see page see page see page see page 255 – 9342.314 – 9342.324 218 For bar thickness mm Model No. Packs of Accessories Laminated copper bars Connection adaptor expansion set Rittal Catalogue 34/Power distribution 1 pc(s). 217 Connection adaptor expansion set Busbar system Page 212 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Fuse elements Page 236 Single-pole extra set to complement the 3-pole connection adaptor for 4-pole configurations. Material: – Cover: ABS – Chassis: Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Note: – The technical data may vary for UL applications – UL approval only applies in conjunction with AC application Technical details: Available on the Internet Colour: – RAL 7035 for 4-pole configuration To fit Model No. Packs of Rated current max. A Rated operating voltage V, ~ 9342.310 9342.320 800 1600 690, 1~ 690, 1~ Single-pole Single-pole Connection of round conductors, fine wire with wire end ferrule mm² 95 - 185 – Connection of round conductors, multi-wire mm² 95 - 300 – Clamping area for laminated copper bars, W x H (for 5 mm bar thickness) mm 33 x 26 65 x 27 Clamping area for laminated copper bars, W x H (for 10 mm bar thickness) mm 33 x 21 65 x 22 Number of poles Width mm 50 85 Height mm 270 270 Approvals UL UL For bar systems with centre-to-centre spacing mm 60 60 5/10 5/10 9342.314 9342.324 see page see page For bar thickness mm Model No. 1 pc(s). Page Accessories Laminated copper bars 218 255 Rittal Catalogue 34/Power distribution OM adaptors Busbar system Page 212 Connection adaptors Page 216 Fuse elements Page 236 Allocation of switchgear Page 231 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Note: – The technical data may vary for UL applications Technical details: Available on the Internet Colour: – Chassis: RAL 7035 Rated current max. 16 – 25 A, with connection cables Rated current max. A Packs of Rated operating voltage V, ~ Number of poles Connection cables, design Connection cables, length mm 16 25 25 25 25 25 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole AWG 12 AWG 12 AWG 12 AWG 12 AWG 12 AWG 12 165 130 130 130 130 130 45 x 237 – 45 x 170 45 x 170 – 45 x 170 With support frame support ◾ – – – – – With PinBlock ◾ – – ◾ – – With insert strips – – – – – – 1 / 10 1 / 10 1 / 10 1 / 10 2 / 10 3 / 10 TS 45D TS 45C TS 45C TS 45C TS 45D TS 45D TS 45D-V With support frame mm Support rails Qty/height mm Support rail version Width mm 45 45 45 45 45 90 Height mm 272 208 208 208 208 208 – UL UL UL – – 60 60 60 60 60 60 Approvals For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. 1 pc(s). 5/10 5/10 5/10 5/10 5/10 5/10 9340.760 9340.310 9340.340 9340.370 9340.320 9340.400 Page Accessories Connection pin 20 pc(s). 9340.280 9340.280 9340.280 9340.280 9340.280 – 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 9340.290 9340.290 – 259 Support rails from page from page from page from page from page from page 259 OM supports see page see page see page see page see page – 225 – – 9342.800 – – 9342.800 260 PinBlock Rittal Catalogue 34/Power distribution 5 pc(s). 219 OM adaptors Rated current max. 32 A, with connection cables Rated current max. A Packs of Rated operating voltage V, ~ Number of poles Connection cables, design Connection cables, length mm 32 32 32 32 32 32 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole AWG 10 AWG 10 AWG 10 AWG 10 AWG 10 AWG 10 130 130 130 165 130 130 45 x 170 45 x 170 45 x 237 45 x 237 55 x 170 55 x 170 With support frame support – – ◾ ◾ – – With PinBlock – – – ◾ – – With insert strips – – – – – – 1 / 10 2 / 10 2 / 10 1 / 10 1 / 10 2 / 10 TS 45C TS 45D TS 45D-V TS 45D TS 45D-V TS 45D TS 55D TS 55D TS 55D-V With support frame mm Support rails Qty/height mm Support rail version Width mm 45 45 45 45 55 55 Height mm 208 208 272 272 208 208 Approvals UL UL UL – UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 60 60 5/10 5/10 5/10 5/10 5/10 5/10 9340.350 9340.380 9340.390 9340.770 9340.460 9340.470 For bar thickness mm Model No. 1 pc(s). Page Accessories Connection pin 20 pc(s). 9340.280 9340.280 9340.280 9340.280 9340.280 9340.280 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 9340.290 9340.290 9340.290 259 Support rails from page from page from page from page from page from page 259 OM supports see page see page see page see page see page see page 225 9342.800 9342.800 9342.800 9342.800 9342.810 9342.810 260 PinBlock 5 pc(s). Rated current max. 40 A, with connection cables Rated current max. A Packs of Rated operating voltage V, ~ 40 40 40 40 40 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole 3-pole Connection cables, design AWG 8 AWG 8 AWG 8 AWG 8 AWG 8 Connection cables, length mm 130 130 130 130 130 55 x 170 – – 55 x 237 – With support frame support – – – ◾ – With PinBlock – – – – – With insert strips – – – – ◾ 1 / 10 2 / 10 1 / 15 2 / 10 2 / 7.5 Metal With support frame mm Support rails Qty/height mm TS 55D TS 55D Metal TS 55D TS 55D-V Width mm 55 55 55 55 75 Height mm 208 208 208 272 208 Approvals UL – – UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 60 5/10 5/10 5/10 5/10 5/10 9340.720 9340.740 9340.750 9340.730 9340.710 Support rail version For bar thickness mm Model No. 1 pc(s). Page Accessories Connection pin 20 pc(s). 9340.280 9340.280 9340.280 9340.280 9340.280 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 9340.290 – 259 from page from page from page from page from page 259 see page see page see page see page see page 225 9342.810 – – 9342.810 – 260 Support rails OM supports PinBlock 220 5 pc(s). 260 Rittal Catalogue 34/Power distribution OM adaptors Rated current max. 65 A, with connection cables Rated current max. A Packs of Rated operating voltage V, ~ 65 65 65 65 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole Connection cables, design AWG 6 AWG 6 AWG 6 AWG 6 Connection cables, length mm 130 130 130 130 With support frame mm – 55 x 170 55 x 237 – With support frame support – – ◾ – With PinBlock – – – – With insert strips – – – ◾ 1 / 10 1 / 10 2 / 10 1 / 7.5 Metal Support rails Qty/height mm TS 55E TS 55E TS 55E TS 55D-V Width mm 55 55 55 75 Height mm 208 208 272 208 Approvals UL UL UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 5/10 5/10 5/10 5/10 9340.410 9340.430 9340.450 9340.700 Support rail version For bar thickness mm Model No. 1 pc(s). Page Accessories Connection pin 20 pc(s). 9340.280 9340.280 9340.280 – 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 – 259 Support rails from page from page from page from page 259 OM supports see page see page see page see page 225 – 9342.810 9342.810 – 260 Accessories PinBlock Rittal Catalogue 34/Power distribution 5 pc(s). Power Engineering see page 295 221 OM adaptors Busbar system Page 212 Connection adaptors Page 216 Fuse elements Page 236 Allocation of switchgear Page 231 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Technical details: Available on the Internet Colour: – Chassis: RAL 7035 Rated current max. 32 A, with tension spring clamp Rated current max. A Packs of Rated operating voltage V, ~ 32 32 32 32 32 32 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole Connection of round conductors mm² 1.5 - 6 1.5 - 6 1.5 - 6 1.5 - 6 1.5 - 6 1.5 - 6 With support frame mm – – 45 x 170 45 x 170 45 x 237 55 x 170 With support frame support – – – – ◾ – With PinBlock – – – ◾ – – 1 / 10 2 / 10 1 / 10 1 / 10 2 / 10 1 / 10 TS 45C TS 45D TS 45C TS 45C TS 45D TS 45D-V TS 55D Width mm 45 45 45 45 45 55 Height mm 208 208 208 208 272 208 Support rails Qty/height mm Support rail version For bar systems with centre-to-centre spacing mm 60 60 60 60 60 60 5/10 5/10 5/10 5/10 5/10 5/10 9340.510 9340.520 9340.530 9340.550 9340.560 9340.660 Cable set see page see page see page see page see page see page Twin cords – – – – – – For bar thickness mm Model No. 1 pc(s). Page Accessories 260 Connection pin 20 pc(s). 9340.280 9340.280 9340.280 9340.280 9340.280 9340.280 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 9340.290 9340.290 9340.290 259 Support rails from page from page from page from page from page from page 259 OM supports see page see page see page see page see page see page 225 – – 9342.800 9342.800 9342.800 9342.810 260 PinBlock 222 5 pc(s). Rittal Catalogue 34/Power distribution OM adaptors Rated current max. 65 A, with tension spring clamp Rated current max. A Packs of Rated operating voltage V, ~ Number of poles 65 65 65 65 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole 2.5 - 16 2.5 - 16 2.5 - 16 2.5 - 16 With support frame mm – – 55 x 170 55 x 237 With support frame support – – – ◾ With PinBlock – – – – 1 / 10 2 / 10 1 / 10 2 / 10 TS 55E TS 55E TS 55D TS 55E TS 55E TS 55D-V Connection of round conductors mm² Support rails Qty/height mm Support rail version Width mm 55 55 55 55 Height mm 208 208 208 272 For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. 1 pc(s). 60 60 60 60 5/10 5/10 5/10 5/10 9340.610 9340.620 9340.630 9340.650 Page Accessories Cable set see page see page see page see page 260 Twin cords see page see page see page see page 260 Connection pin 20 pc(s). 9340.280 9340.280 9340.280 9340.280 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 9340.290 259 Support rails from page from page from page from page 259 OM supports see page see page see page see page 225 – – 9342.810 9342.810 260 Accessories PinBlock Rittal Catalogue 34/Power distribution 5 pc(s). Therm software see page 385 223 OM adaptors Busbar system Page 212 Connection adaptors Page 216 Fuse elements Page 236 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Technical details: Available on the Internet Colour: – Chassis: RAL 7035 Rated current max. 25 A, with plug-in cable outlet Rated current max. A Packs of Rated operating voltage V, ~ 25 25 25 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole Connection of round conductors mm² 1.5 - 4 1.5 - 4 1.5 - 4 With support frame mm 45 x 170 55 x 170 45 x 237 With support frame support – – ◾ With PinBlock – – ◾ 2 / 10 2 / 10 1 / 10 TS 45D TS 45D-V TS 55D TS 55D-V TS 45C Support rails Qty/height mm Support rail version Width mm 45 55 45 Height mm 208 208 292 For bar systems with centre-to-centre spacing mm 60 60 60 5/10 5/10 5/10 9340.910 9340.930 9340.900 Connector with connection facility for 3 main contacts (1.5 – 4 mm²) ◾ ◾ – Sub-unit with connection facilities for 3 main contacts (1.5 – 4 mm²) and 8 auxiliary contacts (0.5 – 2.5 mm²) including connectors – – ◾ For bar thickness mm Model No. 1 pc(s). Page Product-specific supply scope Accessories Cable set see page see page see page 260 Support rails from page from page from page 259 224 Rittal Catalogue 34/Power distribution OM supports Busbar system Page 212 Connection adaptors Page 216 Fuse elements Page 236 For mounting of switchgear with external power supply. Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Technical details: Available on the Internet Colour: – Chassis: RAL 7035 without contact system Number of poles Packs of 3-pole 3-pole 3-pole 45 x 170 55 x 237 – With support frame support – ◾ – With PinBlock ◾ – – Support rails Qty/height mm – 1 / 10 2 / 10 TS 45D With support frame mm Support rail version – TS 55D-V Width mm 45 55 45 Height mm 208 272 208 Approvals UL UL – For bar systems with centre-to-centre spacing mm 60 60 60 For bar thickness mm Model No. 1 pc(s). 5/10 5/10 5/10 9340.260 9340.270 9340.300 Page Accessories Connection pin 20 pc(s). 9340.280 9340.280 9340.280 260 Insert strip 2 pc(s). 9340.290 9340.290 9340.290 259 from page from page from page 259 Support rails Rittal Catalogue 34/Power distribution 225 Circuit-breaker component adaptors Busbar system Page 212 Connection adaptors Page 216 Fuse elements Page 236 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Note: – The technical data may vary for UL applications – Cable outlet: Switch outlet or as outgoing cable from the switchgear Technical details: Available on the Internet Rated current max. 100 – 125 A, 3-pole Rated current max. A Packs of Rated operating voltage V, ~ Number of poles Cable outlet Type of connection 100 100 125 125 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole Top Bottom Top Bottom Box terminal Box terminal Box terminal Box terminal Connection of round conductors mm² 10 - 35 10 - 35 35 - 120 35 - 120 Clamping area for laminated copper bars, W x H mm 10 x 7.8 10 x 7.8 18.5 x 15.5 18.5 x 15.5 ABB (MS 497) Eaton (PKZ2) Schneider Electric (GV3ME80) Siemens (S3) For switchgear make (model) ABB (MS 497) Eaton (PKZ2) Schneider Electric (GV3ME80) Siemens (S3) ABB (S2, T1, T1 UL, T2, T2 ABB (S2, T1, T1 UL, T2, T2 UL) UL) Allen Bradley (140-CMN) Allen Bradley (140-CMN) Eaton (NZM1, NZM1 UL, Eaton (NZM1, NZM1 UL, BZM B1) BZM B1) GE (FD) GE (FD) OEZ (BC160N) OEZ (BC160N) Schneider Electric (NS80, Schneider Electric (NS80, NSC100, NSE75, NSE100) NSC100, NSE75, NS100) Siemens (3RV13 53, 3VT1) Siemens (3RV13 53, 3VT1) Terasaki (E125, S125) Terasaki (E125, S125) Width mm 72 72 90 90 Height mm 210 210 225 225 Approvals UL UL UL UL For bar systems with centre-to-centre spacing mm 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 9342.400 9342.410 9342.540 9342.550 Terminal cover – – ◾ ◾ Sliding blocks – – ◾ ◾ Model No. 1 pc(s). Page Product-specific supply scope Accessories Support rails 35 x 15 mm 5 pc(s). 9320.120 9320.120 – – 261 Sliding blocks 6 pc(s). – – 9342.560 9342.560 261 Connection bracket 3 pc(s). – – 9342.570 9342.570 261 – – – – Insert strip 226 Rittal Catalogue 34/Power distribution Circuit-breaker component adaptors Rated current max. 160 – 250 A, 3-pole Rated current max. A Packs of Rated operating voltage V, ~ Number of poles Cable outlet Type of connection Connection of round conductors mm² Clamping area for laminated copper bars, W x H mm 160 160 250 250 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole Top Bottom Top Bottom Box terminal Box terminal – – 35 - 120 35 - 120 – – 18.5 x 15.5 18.5 x 15.5 – – ABB (S3, T3, T4, T3 ABB (S3, T3, T4, T3 UL, T4 UL) UL, T4 UL) Allen Bradley (140 U-J) Allen Bradley (140U-J) Eaton (NZM2, NZM2 Eaton (NZM2, NZM2 UL, BZM B2) UL, BZM B2) GE (FE 250) GE (FE 250) ABB (S2, T1, T2, XT1, ABB (S2, T1, T2, XT1, Mitsubishi (NF125Mitsubishi (NF125XT2) XT2) SGW/HGW, NF160- SGW/HGW, NF160Allen Bradley (140Allen Bradley (140SGW/HGW) SGW/HGW) CMN) CMN) OEZ (BD250N, OEZ (BD250N, Eaton (NZM1, BZM B1) Eaton (NZM1, BZM B1) BD250S) BD250S) GE (FD) GE (FD) Schneider Electric Schneider Electric OEZ (BC160N) OEZ (BC160N) (NS(X)100, NS(X)160, (NS(X)100, NS(X)160, Schneider Electric Schneider Electric NS(X)250, NSF150, NS(X)250, NSF150, (NS80, NSC100) (NS80, NSC100) NSF250, GV7) NSF250, GV7) Siemens (3RV13 53, Siemens (3RV13 53, Siemens (VL150 UL, Siemens (VL150 UL, 3VT1) 3VT1) VL150X UL, VL160, VL150X UL, VL160, Terasaki (E125, S125) Terasaki (E125, S125) VL160X, VL250, VL250 VL160X, VL250, VL250 UL, 3RV10 63, 3RV13 UL, 3RV10 63, 3RV13 63, 3RV13 64, 3VT2) 63, 3RV13 64, 3VT2) Terasaki (L125, H125, Terasaki (L125, H125, S160, H160, L160, S160, H160, L160, E250, L250, H250) E250, L250, H250) For switchgear make (model) Width mm 90 90 105 105 Height mm 215 215 240 240 Approvals – – – – 60 60 60 60 For bar systems with centre-to-centre spacing mm For bar thickness mm 5/10 5/10 5/10 5/10 9342.500 9342.510 9345.600 9345.610 Terminal cover ◾ ◾ – – Sliding blocks ◾ ◾ ◾ ◾ Connection straps – – ◾ ◾ Model No. Page 1 pc(s). Product-specific supply scope Accessories Support rails 35 x 15 mm – – – – Sliding blocks 6 pc(s). 9342.560 9342.560 9342.640 9342.640 261 Connection bracket 3 pc(s). 9342.570 9342.570 – – 261 – – – – Insert strip Rittal Catalogue 34/Power distribution 227 Circuit-breaker component adaptors Rated current max. 400 – 630 A, 3-pole Rated current max. A Packs of 400 400 630 630 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole Top Bottom Top Bottom Type of connection – – – – Connection of round conductors – – – – Clamping area for laminated copper bars, W x H – – – – Rated operating voltage V, ~ Number of poles Cable outlet ABB (S5, T5, T5 UL) ABB (S5, T5, T5 UL) Allen Bradley (140U-L) Allen Bradley (140U-L) Eaton (NZM3, NZM3 Eaton (NZM3, NZM3 Eaton (NZM3, NZM3 Eaton (NZM3, NZM3 UL/630 A) UL/630 A) UL/400 A) UL/400 A) Mitsubishi (NF630Mitsubishi (NF630Mitsubishi (NF400Mitsubishi (NF400SEW/HEW/REW) SEW/HEW/REW) SEW/HEW/REW) SEW/HEW/REW) OEZ (BH630N, OEZ (BH630N, Schneider Electric Schneider Electric BH630S) BH630S) (NS(X)400, NSJ400) (NS(X)400, NSJ400) Schneider Electric Schneider Electric Siemens (VL400, Siemens (VL400, (NS(X)630, NSJ600) VL400X UL, VL400 UL) VL400X UL, VL400 UL) (NS(X)630, NSJ600) Terasaki (E400, S400, Terasaki (E400, S400, Siemens (VL630, 3VT3, Siemens (VL630, 3VT3, 3V10 73, 3RV13 73, 3V10 73, 3RV13 73, H400, L400) H400, L400) 3RV13 74) 3RV13 74) Terasaki (E630, S630) Terasaki (E630, S630) For switchgear make (model) Width mm 140 140 140 140 Height mm 345 345 345 345 Approvals – – – – 60 60 60 60 For bar systems with centre-to-centre spacing mm For bar thickness mm 5/10 5/10 5/10 5/10 9345.720 9345.730 9345.700 9345.710 Connection straps ◾ ◾ ◾ ◾ Sliding blocks ◾ ◾ ◾ ◾ Model No. Page 1 pc(s). Product-specific supply scope Accessories Support rails 35 x 15 mm – – – – Sliding blocks – – – – Connection bracket Insert strip 228 4 pc(s). – – – – 9342.720 9342.720 9342.720 9342.720 261 Rittal Catalogue 34/Power distribution Circuit-breaker component adaptors Busbar system Page 212 Connection adaptors Page 216 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Note: – The technical data may vary for UL applications – Cable outlet: Switch outlet or as outgoing cable from the switchgear Technical details: Available on the Internet Rated current max. 160 – 250 A, 4-pole Rated current max. A Packs of Rated operating voltage V, ~ Number of poles Cable outlet Type of connection Connection of round conductors mm² Clamping area for laminated copper bars, W x H mm 160 160 250 250 690, 4~ 690, 4~ 690, 4~ 690, 4~ 4-pole 4-pole 4-pole 4-pole Top Bottom Top Bottom Box terminal Box terminal – – 35 - 120 35 - 120 – – 18.5 x 15.5 18.5 x 15.5 – – ABB (T3S/250 A, T4V/ ABB (T3S/250 A, T4V/ 315 A) 315 A) ABB (T1/160 A, T2/ ABB (T1/160 A, T2/ Eaton (NZM2-4/250 A) Eaton (NZM2-4/250 A) 160 A) 160 A) Schneider Electric Eaton (NZM1-4/125 A, Eaton (NZM1-4/125 A, Schneider Electric (NS(X)100, NS(X)160, (NS(X)100, NS(X)160, BZM E1-4/100 A) BZM E1-4/100 A) NS(X)250) NS(X)250) Schneider Electric Schneider Electric Siemens (VL160X, Siemens (VL160X, (NSC100) (NSC100) VL160, VL250) VL160, VL250) For switchgear make (model) Width mm 120 120 140 140 Height mm 277 277 310 310 Approvals UL UL – – For bar systems with centre-to-centre spacing mm 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 9342.504 9342.514 9345.604 9345.614 Terminal cover ◾ ◾ – – Sliding blocks ◾ ◾ ◾ ◾ Connection straps – – ◾ ◾ 9342.560 9342.560 9342.640 9342.640 Model No. Page 1 pc(s). Product-specific supply scope Accessories Sliding blocks Rittal Catalogue 34/Power distribution 6 pc(s). 261 229 Circuit-breaker component adaptors Rated current max. 500 A, 4-pole Rated current max. A Packs of Rated operating voltage V, ~ 500 500 500 500 690, 4~ 690, 4~ 690, 4~ 690, 4~ Number of poles 4-pole 4-pole 4-pole 4-pole Cable outlet Bottom Bottom Bottom Bottom Type of connection – – – – Connection of round conductors – – – – Clamping area for laminated copper bars, W x H – – – – ABB (Tmax T5) Schneider Electric (NS(X)400, NS(X)630) Eaton (NZM3-4XKR130) Siemens (3VL400) Width mm 185 185 185 185 Height mm 300 300 300 300 Approvals – – – – 60 60 60 60 For switchgear make (model) For bar systems with centre-to-centre spacing mm For bar thickness mm 5/10 5/10 5/10 5/10 9345.704 9345.714 9345.724 9345.734 Spacer rolls ◾ ◾ ◾ ◾ Connection screws ◾ ◾ ◾ ◾ Contact plates ◾ – – – – – – – Model No. 1 pc(s). Page Product-specific supply scope Accessories Sliding blocks Perforex New see page 488 230 Rittal Catalogue 34/Power distribution OM adaptor with connection cables Allocation of switchgear 9340.380 OM adaptor 32 A, AWG 10, W = 45 mm 9340.390 OM adaptor 32 A, AWG 10, W = 45 mm 9340.430 OM adaptor 65 A, AWG 6, W = 55 mm 9340.450 OM adaptor 65 A, AWG 6, W = 55 mm 9340.460 OM adaptor 32 A, AWG 10, W = 55 mm 9340.260 OM support, 45 x 208 mm 9340.270 OM support, 55 x 272 mm 9342.860 Support rail TS45D, 35 x 10 mm 9342.870 Support rail TS45D-V 35 x 10 mm 9340.290 Insert strip, 10 x 208 mm 9340.280 Connection pin Rittal Catalogue 34/Power distribution PKE 65 + DILM 65 MSC - DE ... M7 - M12 MSC - DE ... M17 - M32 90 90 MSC - DE ... M17 - M32 MSC - DE ... M7 - M12 PKZM4 + DILM 17-65 MSC-D + M17 - M32 MSC-D + M7 - M15 PKE65 55 45 45 55 45 45 55 45 45 55 45 45 55 45 45 140 90 90 70 45 45 1 1 Construction width Required quantity (pieces) Required quantity (pieces) 1 1 1 1 1 1 1 1 1 1 1 1 PKZ0 + DS7-340 OM adaptor 25 A, AWG 12, W = 45 mm PKE 12, PKE 32 + DS7-340 9340.370 45 9340.350 OM adaptor 32 A, AWG 10, W = 45 mm PKE 65 + DILM 65 9340.340 OM adaptor 25 A, AWG 12, W = 45 mm 45 Version 70 55 54 45 Construction width Model No. Reversing Soft starter starter Starter PKE32 PKE12 PKZM4 PKZM01 PKZM0 MCB MS 450 + PSR30 MS 325 + PSR25 Soft starter MS 116 + PSR3, PSR6, PSR9, PSR12, PSR16, PSR25 MS 450 + A40, A50 MS 132 + AF09, AF12, AF16, AF26, AF30, AF38 MS 450 + A40, A50 MS 132 + AF09, AF12, AF16, AF26, AF30, AF38 MS 116 + AF09, AF12, AF16 Starter MS 495/496/497 MS 450/451 MS 325 MS 116/132 MCB Eaton Reversing starter 110 ABB MS 116 + AF09, AF12, AF16 For make/model 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 3 3 3 3 3 3 231 OM adaptor with connection cables Allocation of switchgear GV2 DM + LC2D/LC2K GV2 DP + LC2D/LC2K GV2 DP + LC2D/LC2K GV2 ME + ATS 90 45 GV2 P + LC2D (AC) LUB 32 LUB 12 GV3 + LC1D65 GV2 - DP + LC1D/LC1K GV2 - DM102 + LC1D/LC1K GV2 ME + LC1D GV2 P + LC1D GV3 BIS 65A 90 45 45 55 45 45 45 45 55 45 55 45 90 90 120 100 90 45 45 45 45 45 55 45 1 1 1 Required quantity (pieces) 1 1 1 1 OM adaptor 32 A, AWG 10, W = 45 mm 1 OM adaptor 32 A, 9340.770 AWG 10, W = 45 mm 9340.370 90 9340.350 GV2 ME + LC2D/LC2K (AC) OM adaptor 25 A, 9340.340 1 AWG 12, W = 45 mm Construction width Required quantity (pieces) OM adaptor 16 A, 9340.760 AWG 12, W = 45 mm 90 Model No. Version 45 45 45 55 45 45 Construction width Soft starter Reversing starter Starter GV2 - RT, LE10, L10 GV2 - P GV2 - ME (screw terminal and tension spring clamp) MCB 3RA22 20... (S0) Screw terminal 3RA22 10... (S00) Screw terminal 3RA12 10... (S00 + S00) 3RA61 20... 3RA21 20... (S0) Screw terminal 3RA21 20... (S00/S0) Screw terminal 3RV20 11...(S00 + S0) Tension spring clamp 3RA21 10... (S00) Screw terminal 3RA11 30... (S2) 3RA11 20... (S0) 3RA11 10... (S00) 3RV20 21... (S0) screw terminal up to 40 A 3RV10 31.. + 3RT103... (S2 + S2) Reversing starter Starter 3RV20 11... (S00) Screw terminal 3RV10 31... (S2) 3RV10 21... (S0) 3RV10 11... (S00) MCB Schneider Electric 90 Siemens 3RA11 20... (S0 + S0) For make/model 1 1 OM adaptor 25 A, AWG 12, W = 45 mm 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 OM adaptor 25 A, 9340.390 AWG 12, W = 45 mm 9340.430 OM adaptor 65 A, AWG 6, W = 55 mm 9340.450 OM adaptor 65 A, AWG 6, W = 55 mm OM adaptor 40 A, 9340.720 AWG 8, W = 55 mm 9340.260 1 1 1 1 1 OM support 45 x 208 mm 1 1 Insert strip 10 x 208 mm PinBlock, W = 45 mm 9342.820 PinBlock PLUS 232 1 1 9340.280 Connection pin 9342.800 1 1 OM support 9340.270 55 x 272 mm 9340.290 1 3 1 1 1 1 1 3 3 1 1 1 1 1 3 3 3 3 3 2 2 2 2 2 1 3 3 1 1 1 1 1 1 1 1 Rittal Catalogue 34/Power distribution OM adaptor with tension spring clamps Allocation of switchgear Version 9340.530 OM adaptor 32 A, 1.5 – 6 mm², W = 45 mm 9340.550 OM adaptor 32 A, 1.5 – 6 mm², W = 45 mm 9340.560 OM adaptor 32 A, 1.5 – 6 mm², W = 45 mm 9340.660 OM adaptor 32 A, 1.5 – 6 mm², W = 55 mm 9340.630 OM adaptor 65 A, 2.5 – 16 mm², W = 55 mm 9340.650 OM adaptor 65 A, 2.5 – 16 mm², W = 55 mm 9340.260 OM support 45 x 208 mm 9340.270 OM support 55 x 272 mm 9340.290 Insert strip 10 x 208 mm 9340.280 Connection pin 9340.860 Cable set AWG 12 9340.870 Cable set AWG 10 9340.890 Cable set AWG 6 9342.860 Support rail TS45D, 35 x 10 mm 9342.930 Support rail TS55D, 35 x 10 mm Rittal Catalogue 34/Power distribution MSC - DE ... M7 - M12 MSC - DE ... M17 - M32 PKE 65 + DILM 65 PKE 12 + DS7-340 PKE 32 + DS7-340 PKZ0 + DS7-340 90 110 45 45 45 PKE 65 + DILM 65 MSC - DE ... M17 - M32 MSC - DE ... M7 - M12 PKZM4 + DILM 17-65 MSC-D + M17 - M32 MSC-D + M7 - M15 PKE65 1 1 1 55 45 45 55 1 1 1 1 45 Required quantity (pieces) 1 1 45 55 45 45 55 45 45 55 45 45 Required quantity (pieces) 1 Soft starter Construction width 140 90 90 70 45 45 70 55 54 45 Construction width Model No. Reversing starter Starter PKE32 PKE12 PKZM4 PKZM01 PKZM0 MCB MS 450 + PSR30 MS 325 + PSR25 Soft starter MS 116 + PSR3, PSR6, PSR9, PSR12, PSR16, PSR25 MS 450 + A40, A50 MS 132 + AF09, AF12, AF16, AF26, AF30, AF38 MS 450 + A40, A50 MS 132 + AF09, AF12, AF16, AF26, AF30, AF38 MS 116 + AF09, AF12, AF16 Starter MS 495/496/497 MS 450/451 MS 325 MS 116/132 MCB Eaton Reversing starter 90 ABB MS 116 + AF09, AF12, AF16 For make/model 1 1 1 1 1 1 1 1 1 1 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 3 3 3 3 3 3 3 3 3 3 3 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 233 OM adaptor with tension spring clamps Allocation of switchgear Siemens OM support 55 x 272 mm 9340.290 Insert strip 10 x 208 mm 9340.280 Connection pin 9340.860 Cable set AWG 12 9340.870 Cable set AWG 10 9340.880 Cable set AWG 8 9340.890 Cable set AWG 6 9342.820 PinBlock PLUS 1 LUB 12 GV3 + LC1D65 GV2 - DP + LC1D/LC1K GV2 - DM102 + LC1D/LC1K GV2 ME + LC1D GV2 P + LC1D LUB 32 45 45 55 45 45 45 45 55 45 55 45 90 90 120 100 90 45 45 45 55 45 45 45 45 GV2 ME + ATS 9340.270 45 9340.260 OM support 45 x 208 mm 1 GV2 DP + LC2D/LC2K OM adaptor 65 A, 2.5 –16 mm², W = 55 mm 1 GV2 DM + LC2D/LC2K 9340.650 1 90 9340.630 OM adaptor 65 A, 2.5 –16 mm², W = 55 mm 1 1 1 1 Required quantity (pieces) 1 1 GV2 ME + LC2D/LC2K (AC) OM adaptor 32 A, 1.5 – 6 mm², W = 45 mm 1 90 9340.560 1 1 Construction width Required quantity (pieces) 1 GV2 P + LC2D (AC) 9340.550 OM adaptor 32 A, 1.5 – 6 mm², W = 45 mm 90 9340.530 OM adaptor 32 A, 1.5 – 6 mm², W = 45 mm 234 55 Version 90 Model No. 45 45 Construction width Soft starter Reversing starter Starter GV3 BIS 65A GV2 - RT, LE10, L10 GV2 - P GV2 - ME (screw terminal and tension spring clamp) MCB 3RA22 20... (S0) Screw terminal 3RA22 10... (S00) Screw terminal 3RA12 10... (S00 + S00) 3RA21 20... (S0) Screw terminal 3RA21 20... (S00/S0) Screw terminal 3RA21 10... (S00) Screw terminal 3RA11 30... (S2) 3RA11 20... (S0) 3RA11 10... (S00) 3RV20 21... (S0) screw terminal up to 40 A 3RV10 31.. + 3RT103... (S2 + S2) Reversing starter Starter 3RV20 11... (S00) Screw terminal 3RV10 31... (S2) 3RV10 21... (S0) 3RV10 11... (S00) MCB Schneider Electric 3RA11 20... (S0 + S0) For make/model 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 Rittal Catalogue 34/Power distribution Bus-mounting fuse bases 235 Bus-mounting fuse bases Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Material: – Bus-mounting fuse base: Fibreglass-reinforced, thermoplastic polyester (PBT) – Contact hazard protection: Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Technical details: Available on the Internet Note: – For the use of fuse inserts to EN 60 269-3 (DIN VDE 0636301) D 02-E 18 D 02-E 18 D II-E 27 (adap- D II-E 27 (adap- D III-E 33 (adap- D III-E 33 (adapPage (adaptor sleeve) (adaptor sleeve) tor screw) tor screw) tor screw) tor screw) Fuse inserts Rated current max. A Rated operating voltage V, ~ Number of poles Type of connection Connection of round conductors mm² 63 63 25 25 63 63 400, 3~ 400 (DC) 400, 3~ 400 (DC) 500, 3~ 500 (DC) 500, 3~ 500 (DC) 690, 3~ 690 (DC) 690, 3~ 690 (DC) 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole Box terminal Box terminal Box terminal Box terminal Box terminal Box terminal 1.5 - 16 1.5 - 25 1.5 - 16 1.5 - 16 1.5 - 16 1.5 - 25 Width mm 27 41 42 56 57 71 Height mm 209 251 209 251 209 251 For bar systems with centre-to-centre spacing mm 60 60 60 60 60 60 For bar thickness mm 5/10 5/10 5/10 5/10 5/10 5/10 3418.010 3418.040 3427.010 3427.040 3433.010 3433.040 10 pc(s). 5 pc(s). 10 pc(s). 5 pc(s). 10 pc(s). 5 pc(s). – ◾ – ◾ – ◾ 10 pc(s). 3418.020 – 3427.020 – 3433.020 – 262 Connection space extender 10 pc(s). 3418.030 – 3427.030 – 3433.030 – 262 Side covers 10 pc(s). 3093.010 – 3093.020 – 3093.020 – 262 Model No. Packs of Pre-configured element ready for connection including cover plate, contact hazard protection and exterior connection clamps Also required Contact hazard protection cover plate Accessories 236 Rittal Catalogue 34/Power distribution Bus-mounting fuse base D-Switch Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Material: – Polyamide (PA 6) – Fire protection corresponding to UL 94-V0 Colour: – Chassis: RAL 7035 – Fuse holder: RAL 7001 Supply includes: – Reducing retaining springs for D 01 and 10 x 38 mm fuses Basis of test: – IEC/DIN EN 60 947-3 Fuse inserts Packs of Rated operating current max. A Note: – For the use of fuse inserts to EN 60 269-3 (DIN VDE 0636301) – With integral visual fuse monitoring via flashing indicator and operating status display as well as cable routing for conductors up to 6 mm² D 01 (with retaining spring) D 02 (with Neozed adaptor sleeve) 10 x 38 (with retaining spring) 400, 3~ Number of poles 3-pole Voltage, indicator light V 100 - 400 Type of connection Box terminal Connection of round conductors mm² 1.5 - 25 Width mm 27 Height mm 226 For bar systems with centre-to-centre spacing mm 60 For bar thickness mm Rittal Catalogue 34/Power distribution Page 63 Rated operating voltage V, ~ Model No. Technical details: Available on the Internet 5/10 3 pc(s). 9340.950 237 NH fuse-switch disconnectors, size 000 Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Material: – Fibreglass-reinforced polyamide – Fire protection corresponding to UL 94-V0 – Contact tracks: Silver-plated hard copper Colour: – Chassis: RAL 9011 – Cover: RAL 7035 Basis of test: – IEC/DIN EN 60 947-3 – DIN EN 60 269-2 (fuse inserts) Technical details: Available on the Internet Size 000, for mounting plate assembly Size Packs of Rated operating current max. A 000 100 Rated operating voltage V, ~ 690, 3~ Number of poles 3-pole Cable outlet Top/bottom Type of connection Box terminal Connection of round conductors mm² 1.5 - 50 Clamping area for laminated copper bars, W x H mm 10 x 10 Width mm 89 Height mm 141.5 For mounting plate assembly Model No. Page ◾ 1 pc(s). 3431.000 5 pc(s). 3071.000 Accessories Micro-switch 238 263 Rittal Catalogue 34/Power distribution NH fuse-switch disconnectors, size 000 Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Material: – Fibreglass-reinforced polyamide – Fire protection corresponding to UL 94-V0 – Contact tracks: Silver-plated hard copper Colour: – Chassis: RAL 7035 – Cover: RAL 7001 Basis of test: – IEC/DIN EN 60 947-3 – DIN EN 60 269-2 (fuse inserts) Technical details: Available on the Internet Size 000 Size Packs of Rated operating current max. A Rated operating voltage V, ~ 000 000 000 100 100 100 690, 3~ 690, 3~ 690, 3~ Number of poles 3-pole 3-pole 3-pole Cable outlet Bottom Top Bottom Box terminal Box terminal Box terminal 2.5 - 50 2.5 - 50 2.5 - 50 Width mm 53 53 53 Height mm 213 213 213 Type of connection Connection of round conductors mm² With electronic fuse monitoring ◾ – – For bar systems with centre-to-centre spacing mm 60 60 60 For bar thickness mm Model No. 5/10 5/10 5/10 1 pc(s). 3431.035 3431.020 3431.030 5 pc(s). 3071.000 3071.000 3071.000 Page Accessories Micro-switch Rittal Catalogue 34/Power distribution 263 239 NH fuse-switch disconnectors, size 00 to 3 Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Material: – Polyamide (PA 6) – Fire protection corresponding to UL 94-V0 – Contact tracks: Electrolytic copper, silver-plated Colour: – Chassis: RAL 7035 – Cover: RAL 7035/7001 Basis of test: – IEC/DIN EN 60 947-3 – DIN EN 60 269-2 (fuse inserts) Note: – The technical data may vary for RU applications. Applications to RU only in conjunction with "Special Purpose Fuses". Technical details: Available on the Internet Size 00 Size Packs of 00 00 00 00 160 160 160 160 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Box terminal Screw M8 Box terminal Screw M8 4 - 95 10 - 95 4 - 95 10 - 95 – – – – 13 x 13 20 x 5 13 x 13 20 x 5 Width mm 106 106 106 106 Height mm 194 194 194 194 Approvals UR UR UR UR – – ◾ ◾ 60 60 – – 5/10 5/10 – – 1 pc(s). 9343.000 9343.010 9344.000 9344.010 – – – – 2 pc(s). 9344.520 9344.520 9344.520 9344.520 – – – – 3071.000 3071.000 3071.000 3071.000 263 see page see page see page see page 255 Rated operating current max. A Rated operating voltage V, ~ Number of poles Connection of round conductors mm² Connection of sector-shaped conductors Clamping area for laminated copper bars, W x H mm For mounting plate assembly For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. Page Accessories Box terminals Connection space cover Arc chambers Micro-switch Laminated copper bars 240 5 pc(s). 263 Rittal Catalogue 34/Power distribution NH fuse-switch disconnectors, size 00 to 3 Size 1 Size Packs of 1 1 1 1 250 250 250 250 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Rated operating current max. A Rated operating voltage V, ~ Number of poles Page Box terminal Screw M10 Box terminal Screw M10 Connection of round conductors mm² 35 - 150 10 - 150 35 - 150 10 - 150 Connection of sector-shaped conductors mm² 50 - 150 – 50 - 150 – 20 x 3 - 14 32 x 10 20 x 3 - 14 32 x 10 Width mm 184 184 184 184 Height mm 298 298 298 298 Approvals UR UR UR UR – – ◾ ◾ 60 60 – – 5/10 5/10 – – 9343.100 9343.110 9344.100 9344.110 Clamping area for laminated copper bars, W x H mm For mounting plate assembly For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. 1 pc(s). Accessories Box terminals 3 pc(s). – 9344.610 – 9344.610 Connection space cover 2 pc(s). 9344.530 9344.530 9344.530 9344.530 263 Arc chambers 3 pc(s). 9344.680 9344.680 9344.680 9344.680 263 Micro-switch 2 pc(s). 9344.510 9344.510 9344.510 9344.510 263 see page see page see page see page 255 Page Laminated copper bars 263 Size 2 – 3 Size Packs of 2 2 2 3 3 3 400 400 400 630 630 630 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Rated operating current max. A Rated operating voltage V, ~ Number of poles Box terminal Screw M10 Screw M10 Box terminal Screw M10 Screw M10 Connection of round conductors mm² 95 - 300 10 - 240 10 - 240 95 - 300 10 - 300 10 - 300 Connection of sector-shaped conductors mm² 120 - 300 – – 120 - 300 – – 32 x 10 - 20 50 x 10 50 x 10 32 x 10 - 20 50 x 10 50 x 10 Width mm 210 210 210 250 250 250 Height mm 298 298 298 298 298 298 Approvals UR UR UR UR UR UR – – ◾ – – ◾ 60 60 – 60 60 – 5/10 5/10 – 5/10 5/10 – 9343.200 9343.210 9344.210 9343.300 9343.310 9344.310 Clamping area for laminated copper bars, W x H mm For mounting plate assembly For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. 1 pc(s). Accessories Box terminals 3 pc(s). – 9344.620 9344.620 – 9344.620 9344.620 Connection space cover 2 pc(s). 9344.540 9344.540 9344.540 9344.550 9344.550 9344.550 263 Arc chambers 3 pc(s). 9344.680 9344.680 9344.680 9344.680 9344.680 9344.680 263 Micro-switch 2 pc(s). 9344.510 9344.510 9344.510 9344.510 9344.510 9344.510 263 see page see page see page see page see page see page 255 Laminated copper bars Rittal Catalogue 34/Power distribution 263 241 NH fuse-switch disconnectors, size 00 to 3 Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Material: – Polyamide (PA 6) – Fire protection corresponding to UL 94-V0 – Contact tracks: Electrolytic copper, silver-plated Colour: – Chassis: RAL 7035 – Cover: RAL 7035/7001 Basis of test: – IEC/DIN EN 60 947-3 – DIN EN 60 269-2 (fuse inserts) Technical details: Available on the Internet Size 00, with electronic fuse monitoring Size Packs of 00 00 00 00 160 160 160 160 400 - 690, 3~ 400 - 690, 3~ 400 - 690, 3~ 400 - 690, 3~ 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Box terminal Screw M8 Box terminal Screw M8 4 - 95 10 - 95 4 - 95 10 - 95 – – – – 13 x 13 20 x 5 13 x 13 20 x 5 Width mm 106 106 106 106 Height mm 194 194 194 194 – – ◾ ◾ 60 60 – – 5/10 5/10 – – 1 pc(s). 9343.020 9343.030 9344.020 9344.030 – – – – 2 pc(s). 9344.520 9344.520 9344.520 9344.520 – – – – 3071.000 3071.000 3071.000 3071.000 263 see page see page see page see page 255 Rated operating current max. A Rated operating voltage V, ~ Number of poles Connection of round conductors mm² Connection of sector-shaped conductors Clamping area for laminated copper bars, W x H mm For mounting plate assembly For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. Page Accessories Box terminals Connection space cover Arc chambers Micro-switch Laminated copper bars 242 5 pc(s). 263 Rittal Catalogue 34/Power distribution NH fuse-switch disconnectors, size 00 to 3 Size 1, with electronic fuse monitoring Size Packs of 1 1 1 250 250 250 400 - 690, 3~ 400 - 690, 3~ 400 - 690, 3~ 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Type of connection Rated operating current max. A Rated operating voltage V, ~ Number of poles Page Box terminal Screw M10 Screw M10 Connection of round conductors mm² 35 - 150 10 - 150 10 - 150 Connection of sector-shaped conductors mm² 50 - 150 – – 20 x 3 - 14 32 x 10 32 x 10 Width mm 184 184 184 Height mm 298 298 298 – – ◾ 60 60 – 5/10 5/10 – 9343.120 9343.130 9344.130 Clamping area for laminated copper bars, W x H mm For mounting plate assembly For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. 1 pc(s). Accessories Box terminals 3 pc(s). – 9344.610 9344.610 Connection space cover 2 pc(s). 9344.530 9344.530 9344.530 263 Arc chambers 3 pc(s). 9344.680 9344.680 9344.680 263 Micro-switch 2 pc(s). 9344.510 9344.510 9344.510 263 see page see page see page 255 Page Laminated copper bars 263 Size 2 – 3, with electronic fuse monitoring Size Packs of 2 2 3 3 400 400 630 630 400 - 690, 3~ 400 - 690, 3~ 400 - 690, 3~ 400 - 690, 3~ 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Screw M10 Screw M10 Screw M10 Screw M10 10 - 240 10 - 240 10 - 300 10 - 300 – – – – 50 x 10 50 x 10 50 x 10 50 x 10 Width mm 210 210 250 250 Height mm 298 298 298 298 – ◾ – ◾ 60 – 60 – 5/10 – 5/10 – 9343.230 9344.230 9343.330 9344.330 Rated operating current max. A Rated operating voltage V, ~ Number of poles Connection of round conductors mm² Connection of sector-shaped conductors Clamping area for laminated copper bars, W x H mm For mounting plate assembly For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. 1 pc(s). Accessories Box terminals 3 pc(s). – – 9344.620 9344.620 Connection space cover 2 pc(s). 9344.540 9344.540 9344.550 9344.550 263 Arc chambers 3 pc(s). 9344.680 9344.680 9344.680 9344.680 263 Micro-switch 2 pc(s). 9344.510 9344.510 9344.510 9344.510 263 see page see page see page see page 255 Laminated copper bars Rittal Catalogue 34/Power distribution 263 243 NH fuse-switch disconnectors, size 00 to 3 Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Material: – Polyamide (PA 6) – Fire protection corresponding to UL 94-V0 – Contact tracks: Electrolytic copper, silver-plated Colour: – Chassis: RAL 7035 – Cover: RAL 7035/7001 Basis of test: – IEC/DIN EN 60 947-3 – DIN EN 60 269-2 (fuse inserts) Technical details: Available on the Internet Size 00, with electromechanical fuse monitoring Size Packs of 00 00 00 00 160 160 160 160 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Box terminal Screw M8 Box terminal Screw M8 4 - 95 10 - 95 4 - 95 10 - 95 – – – – 13 x 13 20 x 5 13 x 13 20 x 5 Width mm 106 106 106 106 Height mm 194 194 194 194 – – ◾ ◾ 60 60 – – 5/10 5/10 – – 1 pc(s). 9343.040 9343.050 9344.040 9344.050 – – – – 2 pc(s). 9344.520 9344.520 9344.520 9344.520 – – – – 3071.000 3071.000 3071.000 3071.000 263 see page see page see page see page 255 Rated operating current max. A Rated operating voltage V, ~ Number of poles Connection of round conductors mm² Connection of sector-shaped conductors Clamping area for laminated copper bars, W x H mm For mounting plate assembly For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. Page Accessories Box terminals Connection space cover Arc chambers Micro-switch Laminated copper bars 244 5 pc(s). 263 Rittal Catalogue 34/Power distribution NH fuse-switch disconnectors, size 00 to 3 Size 1, with electromechanical fuse monitoring Size Packs of 1 1 1 250 250 250 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Type of connection Rated operating current max. A Rated operating voltage V, ~ Number of poles Page Box terminal Screw M10 Screw M10 Connection of round conductors mm² 35 - 150 10 - 150 10 - 150 Connection of sector-shaped conductors mm² 50 - 150 – – 20 x 3 - 14 32 x 10 32 x 10 Width mm 184 184 184 Height mm 298 298 298 – – ◾ 60 60 – 5/10 5/10 – 9343.140 9343.150 9344.150 Clamping area for laminated copper bars, W x H mm For mounting plate assembly For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. 1 pc(s). Accessories Box terminals 3 pc(s). – 9344.610 9344.610 Connection space cover 2 pc(s). 9344.530 9344.530 9344.530 263 Arc chambers 3 pc(s). 9344.680 9344.680 9344.680 263 Micro-switch 2 pc(s). 9344.510 9344.510 9344.510 263 see page see page see page 255 Page Laminated copper bars 263 Size 2 – 3, with electromechanical fuse monitoring Size Packs of 2 2 3 3 400 400 630 630 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Screw M10 Screw M10 Screw M10 Screw M10 10 - 240 10 - 240 10 - 300 10 - 300 – – – – 50 x 10 50 x 10 50 x 10 50 x 10 Width mm 210 210 250 250 Height mm 298 298 298 298 – ◾ – ◾ 60 – 60 – 5/10 – 5/10 – 9343.250 9344.250 9343.350 9344.350 Rated operating current max. A Rated operating voltage V, ~ Number of poles Connection of round conductors mm² Connection of sector-shaped conductors Clamping area for laminated copper bars, W x H mm For mounting plate assembly For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. 1 pc(s). Accessories Box terminals 3 pc(s). 9344.620 9344.620 9344.620 9344.620 Connection space cover 2 pc(s). 9344.540 9344.540 9344.550 9344.550 263 Arc chambers 3 pc(s). 9344.680 9344.680 9344.680 9344.680 263 Micro-switch 2 pc(s). 9344.510 9344.510 9344.510 9344.510 263 see page see page see page see page 255 Laminated copper bars Rittal Catalogue 34/Power distribution 263 245 NH slimline fuse-switch disconnectors, size 00 to 3 Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Material: – Fibreglass-reinforced polyamide – Fire protection corresponding to UL 94-V0 – Contact tracks: Silver-plated hard copper Colour: – Chassis: RAL 7035 – Cover: RAL 7001 – Handle: RAL 7016 Basis of test: – IEC/DIN EN 60 947-3 – DIN EN 60 269-2 (fuse inserts) Technical details: Available on the Internet Size 00 Size Packs of 00 00 00 00 00 160 160 160 160 160 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole 3-pole Cable outlet Top/bottom Top/bottom Top/bottom Top/bottom Top/bottom Type of connection Box terminal Screw M8 Box terminal Screw M8 Screw M8 2.5 - 95 2.5 - 95 2.5 - 95 2.5 - 95 2.5 - 95 Width mm 50 50 50 50 50 Height mm 400 400 400 400 400 Rated operating current max. A Rated operating voltage V, ~ Number of poles Connection of round conductors mm² For converter installation For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. 1 pc(s). – – – – ◾ 60 60 100 100 100 5/10 5/10 5/10 5/10 5/10 9346.000 9346.010 9346.020 9346.030 9346.060 ◾ ◾ ◾ ◾ – Page Product-specific supply scope 3 mounting hooks Accessories Connection space cover 1 pc(s). 9346.460 9346.460 9346.460 9346.460 9346.460 264 Clamp-type terminal connection 1 set(s) – 3592.010 – 3592.010 3592.010 264 Box terminals – – – – – Busbar terminal – – – – – 9346.400 9346.400 9346.400 9346.400 9346.400 Current converter – – – – – Cable ties – – – – – Inserted screw nuts M12 – – – – – Micro-switch 246 5 pc(s). 263 Rittal Catalogue 34/Power distribution NH slimline fuse-switch disconnectors, size 00 to 3 Size 00 – 3 Size Packs of 00 00 1 2 3 160 160 250 400 630 690, 3~ 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole 3-pole Top/bottom Top/bottom Top/bottom Top/bottom Top/bottom Screw M8 Screw M8 Bolt M12 Bolt M12 Bolt M12 2.5 - 95 2.5 - 95 6 - 240 6 - 240 6 - 240 Width mm 50 50 100 100 100 Height mm 740 740 740 740 740 – ◾ ◾ ◾ ◾ 185 185 185 185 185 Rated operating current max. A Rated operating voltage V, ~ Number of poles Cable outlet Type of connection Connection of round conductors mm² For converter installation For bar systems with centre-to-centre spacing mm For bar thickness mm 5/10 5/10 5/10 5/10 5/10 9346.040 9346.050 9346.110 9346.210 9346.310 3 screws M12 x 30 for equipment attachment – – ◾ ◾ ◾ 3 inserted screw nuts M12 – – ◾ ◾ ◾ 3 hex nuts for conductor connection – – ◾ ◾ ◾ Model No. 1 pc(s). Page Product-specific supply scope Accessories Connection space cover – – – – – Clamp-type terminal connection 1 set(s) 3592.010 3592.010 – – – 264 Box terminals 3 pc(s). – – 9346.450 9346.450 9346.450 264 Busbar terminal 3 pc(s). 9346.470 9346.470 9346.440 9346.440 9346.440 264 Micro-switch 5 pc(s). 9346.400 9346.400 3071.000 3071.000 3071.000 263 265 Current converter – see page see page see page see page Cable ties 1 pc(s). – – 9346.480 9346.480 9346.480 265 Inserted screw nuts M12 30 pc(s). – – 3591.060 3591.060 3591.060 253 Ri4Power ISV distribution enclosures New see page 297 Rittal Catalogue 34/Power distribution 247 NH slimline fuse-switch disconnectors, size 00 to 3 Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Material: – Fibreglass-reinforced polyamide – Fire protection corresponding to UL 94-V0 – Contact tracks: Silver-plated hard copper Colour: – Chassis: RAL 7035 – Cover: RAL 7001 – Handle: RAL 7016 Basis of test: – IEC/DIN EN 60 947-3 – DIN EN 60 269-2 (fuse inserts) Technical details: Available on the Internet Size 00 – 3, with electronic fuse monitoring Size Packs of 00 1 2 3 160 250 400 630 690, 3~ 690, 3~ 690, 3~ 690, 3~ 3-pole 3-pole 3-pole 3-pole Top/bottom Top/bottom Top/bottom Top/bottom Screw M8 Bolt M12 Bolt M12 Bolt M12 2.5 - 95 6 - 240 6 - 240 6 - 240 Width mm 50 100 100 100 Height mm 400 740 740 740 – ◾ ◾ ◾ 60 185 185 185 Rated operating current max. A Rated operating voltage V, ~ Number of poles Cable outlet Type of connection Connection of round conductors mm² For converter installation For bar systems with centre-to-centre spacing mm For bar thickness mm Model No. 1 pc(s). 5/10 5/10 5/10 5/10 9346.015 9346.115 9346.215 9346.315 Page Product-specific supply scope 3 mounting hooks ◾ – – – 3 screws M12 x 30 for equipment attachment – ◾ ◾ ◾ 3 inserted screw nuts M12 – ◾ ◾ ◾ 3 hex nuts for conductor connection – ◾ ◾ ◾ Accessories Connection space cover 1 pc(s). 9346.460 – – – 264 Clamp-type terminal connection 1 set(s) 3592.010 – – – 264 Box terminals 3 pc(s). – 9346.450 9346.450 9346.450 264 Busbar terminal 3 pc(s). – 9346.440 9346.440 9346.440 264 Micro-switch 5 pc(s). 9346.400 3071.000 3071.000 3071.000 263 Current converter – see page see page see page 265 Cable ties 1 pc(s). – 9346.480 9346.480 9346.480 265 Inserted screw nuts M12 30 pc(s). – 3591.060 3591.060 3591.060 253 248 Rittal Catalogue 34/Power distribution Fuse holder Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Material: – Polyamide (PA 6) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Note: – For snap-on mounting on 35 mm (7.5 mm/15 mm high) support rails to DIN EN 60 715 or RiLine component adaptor combinations (OM adaptors/ supports) Approvals: – UL 512, CSA C22.2 No.39 Technical details: Available on the Internet Rated operating current max. 30 – 60 A Fuse type (class) CC J J Rated operating current max. A 30 30 60 600, 3~ 600, 3~ 600, 3~ 3-pole 3-pole 3-pole UL 4248-4 UL 4248-8 UL 4248-8 Rated operating voltage V, ~ Number of poles Fuse standard Fuse size mm 10 x 38 21 x 57 27 x 60 Connection of round conductors mm² 2.5 - 10 2.5 - 25 2.5 - 25 Connection of round conductors AWG 6 – AWG 14 AWG 2 – AWG 14 AWG 2 – AWG 14 Width mm 52.5 97.5 120 Height mm 78 114 122 Depth mm 59 80 89 Approvals UL UL UL 9345.000 9345.010 9345.030 4 pc(s). 2 pc(s). 2 pc(s). Model No. Packs of Rittal Catalogue 34/Power distribution Page 249 Fuse holder Busbar system Page 212 Connection adaptors Page 216 OM adaptors Page 219 Circuit-breaker component adaptors Page 226 Material: – Polyamide (PA 6) – Fire protection corresponding to UL 94-V0 – Contact tracks: Electrolytic copper, silver-plated Colour: – Chassis: RAL 7035 – Cover: RAL 7035/7001 Approvals: – UL 4248-1 – UL 4248-8 – CSA C22.2 No. 4248.1-07 – CSA C22.2 No. 4248.8-07 Technical details: Available on the Internet Rated operating current max. 100 – 400 A Fuse type (class) Packs of Rated operating current min. A Rated operating current max. A Rated operating voltage V, ~ Number of poles Fuse standard Fuse size mm Cable outlet Type of connection J J J 61 101 201 100 200 400 600, 3~ 600, 3~ 600, 3~ 3-pole 3-pole 3-pole UL 4248-8 UL 4248-8 UL 4248-8 29 x 118 41 x 146 54 x 181 Top/bottom Top/bottom Top/bottom Box terminal Box terminal Box terminal AWG 2 – MCM 300 AWG 3/0 – MCM 600 AWG 3/0 – MCM 600 Width mm 184 210 250 Height mm 288 288 328 Approvals UR UR UR For bar systems with centre-to-centre spacing mm 60 60 60 5/10 5/10 5/10 9345.100 9345.200 9345.400 Connection of round conductors For bar thickness mm Model No. 250 1 pc(s). Page Rittal Catalogue 34/Power distribution RiLine accessories Busbar supports/base isolators Busbar support Note: 9340.030/9342.030 – The busbar supports may be bayed with 60 mm bar centre distance for the configuration of multipole systems 1 and 2-pole Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Technical details: Available on the Internet Colour: – RAL 7035 1 Supply includes: 9342.030 – Raised section for stepped configuration of the PLS busbars Version 1-pole 1-pole 2-pole – – 60 PLS 1600 – – Packs of Number of poles Bar centre distance mm For busbars E-Cu 1000, 1~ 1000, 1~ 1500 (DC) 1500 (DC) – ◾ ◾ ◾ PEN/N/PE support N/PE support 2 253 12 x 5/101), 12 x 5 – 30 x 10 mm 15 x 5 – 30 x 10 mm – Rated operating voltage V, ~ Page 252 1000, 2~ – – ◾ 4 pc(s). 9342.030 9340.030 9340.040 Spacers 12 pc(s). – 9340.090 – 251 Captive nuts M52) 50 pc(s). – 4166.000 4166.000 624 Model No. Accessories 1) 2) If 12 x 5/10 mm busbars are used, the spacer 9340.090 is additionally required For attaching the busbar support to the TS frame section and punched sections with mounting flanges with rectangular system punchings 12.5 x 10.5 mm Base isolators Rated operating voltage kV 1 1 For configuring busbar systems with any given bar centre distances and for assembling insulated PE or PEN busbars. Tensile strength kN 12 13 Torsional strength Nm 75 90 Bending strength kN 6 6 Material: – Duroplastic polyester (UP resin) Height mm 40 50 Technical details: Available on the Internet Packs of Thread Model No. M10 M10 6 pc(s). 6 pc(s). 3031.000 3032.000 Spacers Packs of Model No. for RiLine busbar supports (flat bar system) For adapting 12 x 5 and 12 x 10 mm size busbars. For busbar supports ◾ 9340.030 (1-pole), see page 251 ◾ 9340.000/.010 (3-pole), see page 212 ◾ 9340.004 (4-pole), see page 212 12 pc(s). 9340.090 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Rittal Catalogue 34/Power distribution 251 RiLine accessories Busbars CUPONAL busbars Rated current1) A Dimensions mm To DIN EN 13 601 Length: 2400 mm/bar Copper-coated aluminium busbars, suitable for the configuration of busbar systems with busbar supports 9340.000/9340.050, see page 212. Material: – Aluminium core with crimped copper coating made from E-Cu 1) Packs of Model No. 20 x 5 235 6 pc(s). 3582.020 20 x 10 363 3 pc(s). 3585.020 30 x 5 328 6 pc(s). 3584.020 30 x 10 493 3 pc(s). 3586.020 Current carrying capacity at 65°C bar temperature and 35°C ambient temperature Correction factor diagram to DIN 43 671 Short-circuit resistance diagrams 70 Ip peak short-circuit current [kA] 65 60 b 55 50 45 40 a 35 30 25 20 200 250 300 350 400 450 500 Busbar support spacing [mm] Busbars E-Cu CUPONAL busbars mm Busbar support 30 x 5/10 9340.000/.050 a 20 x 5/10 9340.000/.050 b Curve Technical details: Available on the Internet To DIN EN 13 601 Length: 2400 mm/bar Material: E-Cu F30 Dimensions mm Approvals Packs of Model No. 12 x 5 6 pc(s). 3580.000 15 x 5 6 pc(s). 3581.000 20 x 5 6 pc(s). 3582.000 25 x 5 6 pc(s). 3583.000 30 x 5 6 pc(s). 3584.000 12 x 10 6 pc(s). 3580.100 15 x 10 6 pc(s). 3581.100 Page 20 x 10 – 3 pc(s). 3585.005 30 x 10 – 3 pc(s). 3586.005 40 x 10 – 3 pc(s). 3587.000 50 x 10 – 2 pc(s). 3588.005 60 x 10 – 2 pc(s). 3589.005 80 x 10 – 1 pc(s). 3590.005 100 x 10 – 1 pc(s). 3590.015 12 x 5 – 15 x 10 (single connection) 3 pc(s). 9350.075 20 x 5 – 30 x 10 (single connection) 3 pc(s). 9320.020 254 20 x 5 – 30 x 10 (bayed connection) 3 pc(s). 9320.030 254 12/15 x 5 4 pc(s). 9350.010 253 12/15 x 10 4 pc(s). 9350.060 253 12 x 5 – 30 x 10 10 pc(s). 3092.000 253 40 – 60 x 10 10 pc(s). 3085.000 253 Accessories Busbar connectors for busbars mm Busbar cover sections for busbars mm 252 254 Rittal Catalogue 34/Power distribution RiLine accessories Busbars Busbar cover sections Note: – Contact hazard protection, alternative solutions, see page 256 Contact hazard protection via covering of the busbars. May be cut to required length. Technical details: Available on the Internet Length: 1000 mm/section Material: – Thermally modified hard PVC – Fire protection corresponding to UL 94-V0 Cover section for:Busbars Colour: – RAL 7035 For busbars mm Approvals Packs of Model No. 12/15 x 5 – 4 pc(s). 9350.010 12/15 x 10 – 4 pc(s). 9350.060 12 x 5 – 30 x 10 10 pc(s). 3092.000 40 – 60 x 10 10 pc(s). 3085.000 Inserted screw nuts M12 Packs of Model No. Self-holding nuts with knurled ring for busbars E-Cu. 30 pc(s). 3591.060 Hole diameter: 14.5 mm PLS special busbars E-Cu Technical details: Available on the Internet For system PLS 800, bar thickness 5 mm, bar cross-section 300 mm2 For enclosure width mm Length mm 600 Approvals 495 Packs of Model No. 3 pc(s). 3524.000 800 695 3 pc(s). 3525.000 1000 895 3 pc(s). 3525.010 1200 1095 3 pc(s). 3526.000 variable 2400 1 pc(s). 3509.000 Page Accessories PLS busbar connector (single connection) 3 pc(s). 3504.000 PLS busbar connector (bayed connection) 3 pc(s). 3505.000 254 254 PLS expansion connector 3 pc(s). 9320.060 254 Packs of Model No. Page For system PLS 1600, bar thickness 10 mm, bar cross-section 900 mm2 For enclosure width mm Length mm Approvals 600 495 3 pc(s). 3527.000 800 695 3 pc(s). 3528.000 1000 895 3 pc(s). 3528.010 1200 1095 3 pc(s). 3529.000 variable 2400 1 pc(s). 3516.000 Accessories PLS busbar connector (single connection) 3 pc(s). 3514.000 PLS busbar connector (bayed connection) 3 pc(s). 3515.000 254 PLS expansion connector 3 pc(s). 9320.070 254 Rittal Catalogue 34/Power distribution 254 253 RiLine accessories Busbars Busbar connectors For connecting square busbars, no drilling required. Technical details: Available on the Internet Material: 9350.075 – Top piece: St 37, nickel-plated surface finish – Contact plate: E-Cu, nickel-plated surface finish 9320.020/9320.030 – Top piece: Sheet steel, zinc-plated, passivated – Contact plate: E-Cu, silver-plated For busbars mm 12 x 5 – 15 x 10 20 x 5 – 30 x 10 1) Application Single connection Bayed connection1) Approvals Packs of Model No. ◾ – 3 pc(s). 9350.075 ◾ – 3 pc(s). 9320.020 – ◾ 3 pc(s). 9320.030 Connection from enclosure to enclosure PLS busbar connectors For connecting the PLS special busbars; no drilling required. Technical details: Available on the Internet Material: – E-Cu Surface finish: – Nickel-plated Application Single connection Bayed connection1) 1) For system Packs of Model No. PLS 800 Approvals 3 pc(s). 3504.000 PLS 1600 3 pc(s). 3514.000 PLS 800 3 pc(s). 3505.000 PLS 1600 3 pc(s). 3515.000 Connection from enclosure to enclosure PLS expansion connector For thermal and mechanical compensation during connection of PLS special busbars from enclosure to enclosure. Material: – E-Cu Note: – At a temperature increase of 30 K, there is an expansion in the length of the busbars by approximately 0.5 mm/m. For this reason, it is advisable to use an expansion connector for thermal compensation in busbar systems with busbar sections > 3600 mm. Technical details: Available on the Internet Expansion connector For system Packs of Model No. PLS 800 Approvals 3 pc(s). 9320.060 Page PLS 1600 3 pc(s). 9320.070 PLS 800 3 pc(s). 3504.000 254 PLS 1600 3 pc(s). 3514.000 254 Also required PLS busbar connectors1) 1) 254 Two busbar connectors are needed to fit one expansion connector Rittal Catalogue 34/Power distribution RiLine accessories Busbars Laminated copper bars Technical details: Available on the Internet Length: 2000 mm/bar Material: Cu lamina – High-purity electrolyte copper F20 Insulation – High-strength vinyl compound – Expansion 370% – Temperature range: -30°C…+105°C – Fire protection corresponding to UL 94-V0 – Dielectric strength: 20 kV/mm Configuration1) mm 1) 2) In at 70 K2) A In at 50 K2) A In at 30 K2) A Packs of Model No. 6 x 9 x 0.8 285 240 180 1 pc(s). 3565.005 6 x 15.5 x 0.8 415 350 265 1 pc(s). 3568.005 10 x 15.5 x 0.8 575 480 365 1 pc(s). 3569.005 5 x 20 x 1 525 435 330 1 pc(s). 3570.005 5 x 24 x 1 605 510 385 1 pc(s). 3571.005 10 x 24 x 1 920 770 585 1 pc(s). 3572.005 5 x 32 x 1 770 645 485 1 pc(s). 3573.005 10 x 32 x 1 1155 965 730 1 pc(s). 3574.005 5 x 40 x 1 930 780 590 1 pc(s). 3575.005 10 x 40 x 1 1370 1145 865 1 pc(s). 3576.005 5 x 50 x 1 1125 940 710 1 pc(s). 3577.005 10 x 50 x 1 1635 1365 1030 1 pc(s). 3578.005 10 x 63 x 1 1950 1610 1230 1 pc(s). 3579.005 Number of lamina x lamina width x lamina thickness The conductor temperature of the laminated copper bar is derived by adding the ambient temperature and the temperature increase together Example: 3565.005 carrying 180 A, i.e. the temperature increases by 30 K. At an ambient temperature of 35°C this produces a resultant conductor temperature of 35°C + 30 K = 65°C Universal support Packs of Model No. For the attachment of laminated copper bars from 5 x 20 x 1 to 10 x 63 x 1 mm. 3 pc(s). 3079.000 Material: – Fibreglass-reinforced, thermoplastic polyester (PBT) – Fire protection corresponding to UL 94-V0 – PS punched rails, see page 610 Colour: – RAL 7035 Technical details: Available on the Internet Accessories: Supply includes: – Screws and sliding nuts for mounting on PS punched rails Universal support For the attachment of multi-stacked laminated copper bars from 5 x 40 x 1 to 10 x 100 x 1 mm. Material: – Fibreglass-reinforced, thermoplastic polyester (PBT) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Packs of Model No. 3 set(s) 3079.010 Note: – 3 sets of universal supports correspond to the supply scope shown in the photograph Accessories: – C rails 30/15, see page 612 Supply includes: – Screws and sliding nuts for mounting on C rails Rittal Catalogue 34/Power distribution 255 RiLine accessories Contact hazard protection System components Technical details: Available on the Internet Material: – Thermally modified hard PVC. – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 3-pole For RiLine busbar systems Flat bars PLS 800 4-pole PLS 1600 Flat bars PLS 1600 PLUS Base trays 1 Length (L) mm Packs of 500 2 pc(s). 9340.100 9341.100 9342.100 – – 700 2 pc(s). 9340.110 9341.110 9342.110 – – 900 2 pc(s). 9340.120 9341.120 9342.120 – – 1100 2 pc(s). 9340.130 9341.130 9342.130 9340.134 9342.134 2400 1 pc(s). 9340.170 9341.170 9342.170 – – 2 pc(s). 9340.140 9341.140 9342.140 – – 700 2 pc(s). 9340.200 9340.200 9340.200 – – 1100 2 pc(s). 9340.210 9340.210 9340.210 9340.214 9340.214 Approvals – Model No. Model No. Base tray infills 100 Cover sections 2 Base tray Base tray infill Cover section For rear contact hazard protection of the flat bar assembly. For rear contact hazard protection when connecting the busbars from enclosure to enclosure. May be cut to length as required; for clip-on mounting to the base tray. Supply includes: Assembly parts Support panels for cover section To prevent side access to the cover section. The support panel also provides additional stability. For system configuration Note: If the cover section is loaded from the front, the support panel is needed for stability. Approvals Packs of Model No. 3-pole 5 pc(s). 9340.220 4-pole 5 pc(s). 9340.224 Recommended mounting distance: ≤ 500 mm Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Technical details: Available on the Internet Colour: – RAL 7035 Cross members for RiLine busbar connections 3-pole To comply with the clearances required for “feeder circuits” under UL 508. For flat bar systems with 60 mm bar centre distance and PLS 800/1600. Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Length mm Approvals 160 Packs of Model No. 2 pc(s). 9340.230 Also required: – Support panel 9340.220, see page 256 Technical details: Available on the Internet Note: – Two cross members are required for one busbar connection 256 Rittal Catalogue 34/Power distribution RiLine accessories Connection system Conductor connection clamps Accessories: Material: 3450.500 – 3459.500 – Sheet steel, zinc-plated, passivated 3550.000/3555.000 – Brass Connection of round conductors mm2 For bar thickness mm – Laminated copper bars, see page 255 Technical details: Available on the Internet Clamping area for laminated copper bars, W x H mm Approvals Packs of Model No. 3–5 1–4 – 15 pc(s). 3550.000 5 1–4 – 15 pc(s). 3450.500 5 2.5 – 16 8x8 15 pc(s). 3451.500 5 16 – 50 10.5 x 11 15 pc(s). 3452.500 5 35 – 70 16.5 x 15 15 pc(s). 3453.500 5 70 – 185 22.5 x 20 15 pc(s). 3454.500 6 – 10 1–4 – 15 pc(s). 3555.000 10 1–4 – 15 pc(s). 3455.500 10 2.5 – 16 8x8 15 pc(s). 3456.500 10 16 – 50 10.5 x 11 15 pc(s). 3457.500 10 35 – 70 16.5 x 15 15 pc(s). 3458.500 10 70 – 185 22.5 x 20 15 pc(s). 3459.500 Plate clamps For busbars mm For connecting laminated copper bars; no drilling required. Material: – Sheet steel Surface finish: – Zinc-plated, passivated Accessories: – Laminated copper bars, see page 255 Clamping area for laminated Packs of copper bars, W x H mm Model No. 12 x 5 – 30 x 10 34 x 10 3 pc(s). 3554.000 40 x 10 34 x 10 3 pc(s). 3559.000 50 x 10 34 x 10 3 pc(s). 3560.000 50 x 10 54 x 10 3 pc(s). 3562.000 60 x 10 34 x 10 3 pc(s). 3561.000 60 x 10 54 x 10 3 pc(s). 3563.000 80 x 10 65 x 10 3 pc(s). 3460.500 Technical details: Available on the Internet System covers For conductor connection clamps and plate clamps. Material: – ABS – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Note: – For 3-pole systems with 60/100 mm bar centre distance – Only suitable for use with systems without a base tray – For systems with a base tray, the system covers must be mechanically shortened Technical details: Available on the Internet Height mm Width mm Depth mm For mounting on bar systems 60 mm Approvals Packs of Model No. 100 mm 50 80 230 325 4 pc(s). 3086.000 100 80 230 325 4 pc(s). 3087.000 100 110 230 325 4 pc(s). 3090.000 200 80 230 325 4 pc(s). 3088.000 200 110 230 325 4 pc(s). 3091.000 Rittal Catalogue 34/Power distribution 257 RiLine accessories Connection system/Mini-PLS component adaptors Connection block Material: Chassis – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Note: – When using the terminal on 2-pole busbar systems, the terminal must be rotated through 180° for connection to the PE busbar Technical details: Available on the Internet Cover – ABS – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Supply includes: – 3 terminals including cover Rated current max. A Packs of 800 1600 690, 1~ 690, 1~ Rated operating voltage (L1 + L2) V 1000 (DC) 1000 (DC) Rated operating voltage (L1 + L3) V 1500 (DC) 1500 (DC) Top/bottom Top/bottom Connection of round conductors, fine wire with wire end ferrule mm² 95 – 185 – Connection of round conductors, multi-wire mm² 90 – 300 – Clamping area for laminated copper bars (with 5 mm bar thickness) W x H mm 33 x 26 65 x 27 Clamping area for laminated copper bars (with 10 mm bar thickness) W x H mm 33 x 21 65 x 22 Width mm 50 85 Height mm 88 88 5/10 5/10 9342.311 9342.321 ◾ ◾ Rated operating voltage V, ~ Cable outlet For bar thickness mm Model No. 3 pc(s). Page Accessories Laminated copper bars Insert strips for Mini-PLS component adaptors To extend the construction width. 255 Width mm Packs of Model No. 9 2 pc(s). 9623.000 Width mm Packs of Model No. 45 10 pc(s). 9320.150 54 10 pc(s). 3548.000 72 10 pc(s). 3549.000 Material: – ABS Colour: – RAL 7035 Support rails 35 x 7.5 mm for Mini-PLS component adaptors Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws and side anti-slip guard 258 Rittal Catalogue 34/Power distribution RiLine accessories for OM adaptor/support Support rails 35 x 10 mm Supply includes: – Assembly screws for OM adaptor/support For attaching to the adaptor section and support frame. Note: – UL approval in conjunction with OM adaptor/ support Material: – Polyamide (PA 6.6) Colour: – RAL 9005 Version Width mm With anti-slip guard1) Packs of Model No. TS 45C 45 ◾ 5 pc(s). 9342.850 TS 45D 45 – 5 pc(s). 9342.860 TS 45D-V2) 45 – 5 pc(s). 9342.870 TS 55C 55 ◾ 5 pc(s). 9342.920 TS 55D 55 – 5 pc(s). 9342.930 TS 55D-V2) 55 – 5 pc(s). 9342.940 1) Anti-slip guard for motor circuit-breaker 2) Support rail only suitable for non-pitch pattern-dependent mounting on support frame Support rails 35 x 15 mm for OM adaptor/support For attaching to the adaptor section Width mm Packs of Model No. 45 5 pc(s). 9342.880 55 5 pc(s). 9342.950 Width mm Packs of Model No. 72 5 pc(s). 9342.980 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws and side anti-slip guard Support rails 35 x 7.5 mm for OM adaptor/support For assembly on 55 mm wide OM adaptors/supports with 10 mm wide insert strips mounted on the right and left. Arrangement of the mounting hole for central configuration on 55 mm wide adaptor section or support frame. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws and side anti-slip guard Insert strips for OM adaptor/support To extend the construction width in a 10 mm pitch pattern. May be bayed as often as required on both sides. With integral cable duct. Width mm 10 Approvals Packs of Model No. 2 pc(s). 9340.290 Material: – Polyamide (PA 6.6) Colour: – RAL 7035 Supply includes: – 6 connection pins Rittal Catalogue 34/Power distribution 259 RiLine accessories for OM adaptor/support Connection pin Approvals For any required mechanical connection of OM adaptor/support and insert strip 9340.290. Packs of Model No. 20 pc(s). 9340.280 Material: – Polyamide (PA 6) Colour: – RAL 5010 PinBlock for support frames For secure attachment and positioning of the contactor on motor starter combinations, for simple clip-on mounting onto the support frame. Individual vertical positioning is achieved by relocating the PinBlock. Material: – Polyamide (PA 6.6) Colour: – RAL 9005 For support frame width mm Packs of Model No. 45 5 pc(s). 9342.800 55 5 pc(s). 9342.810 Note: – UL approval in conjunction with OM adaptor/ support Accessories: – PinBlock Plus, see page 260 PinBlock Plus Packs of Model No. for starters with increased contactor attachment Mounted by simply clipping onto the PinBlock 9342.800/.810. 5 pc(s). 9342.820 Material: – Polyamide (PA 6.6) Note: – UL approval in conjunction with OM adaptor/ support Colour: – RAL 9005 Cable set Pre-assembled connection cables for individual connection of switchgear, top-mounted on OM adaptors with tension spring clamps. Length: 130 mm Material: – PVC insulation – Temperature resistant to 105°C – Wire ends with ultrasonic wire-end compression at both ends Technical details: Available on the Internet Twin cords for OM adaptors with tension spring clamp 2.5 – 16 mm2 Pre-assembled connection cables for individual connection of up to two switchgear units per adaptor. Cable length: L1 = 140 mm L2 = 250 mm Material: – PVC insulation – Temperature resistant to 105°C – Wire ends with ultrasonic wire-end compression at both ends 260 Version Packs of Model No. AWG 14 = 2.08 mm2 ≙ 2.5 mm2 15 pc(s). 9340.850 AWG 12 = 3.31 mm2 ≙ 4 mm2 15 pc(s). 9340.860 AWG 10 = 5.26 mm2 ≙ 6 mm2 15 pc(s). 9340.870 AWG 8 = 8.37 mm2 ≙ 10 mm2 6 pc(s). 9340.880 AWG 6 = 13.3 mm2 ≙ 16 mm2 6 pc(s). 9340.890 AWG = American Wire Gauges Version Packs of Model No. AWG 10 = 5.26 mm2 ≙ 6 mm2 6 pc(s). 9340.820 AWG 8 = 8.37 mm2 ≙ 10 mm2 6 pc(s). 9340.830 AWG = American Wire Gauges Technical details: Available on the Internet Rittal Catalogue 34/Power distribution RiLine accessories for circuit-breaker component adaptors Insert strips for circuit-breaker component adaptors To extend the construction width from 140 mm to 190 mm. Material: – ABS To fit Model No. Width mm 9345.700/.710 9345.720/.730 25 Approvals Packs of Model No. 4 pc(s). 9342.720 Note: – 4 pieces are needed to widen a component adaptor Colour: – RAL 7035 Sliding blocks To fit Model No. With threaded insert Packs of Model No. for circuit-breaker component adaptors For additional locking of circuit-breakers with more than two attachment points. 9342.500/.510 9342.504/.514 9342.540/.550 M3/M4 6 pc(s). 9342.560 Colour: – RAL 7035 9345.600/.610 9345.604/.614 M4/M5 6 pc(s). 9342.640 Note: – UL approval in conjunction with circuit-breaker component adaptor Connection bracket for circuit-breaker component adaptors Pre-assembled, laminated flat copper for connecting standard, commercially available moulded case circuit-breakers (MCCB). Technical details: Available on the Internet Material: – Electrolytic copper F20 Insulation: – Vinyl compound – Temperature resistant to 105°C – Fire protection corresponding to UL 94-V0 To fit Model No. 9342.500/.510 9342.540/.550 1) 2) Dimensions1) mm For connecting moulded case circuit-breakers (MCCB), make (model) Packs of Model No. 6 x 9 x 0.8 ABB (T1, T1 UL, T2, T2 UL), Eaton (NZM1, NZM1 UL, BZM B1), OEZ (BC160N), Schneider Electric (NSC100, NSE75, NSE100) Siemens (3RV13 53, 3VT 1) 3 pc(s). 9342.5702) Number of lamina x lamina width x lamina thickness Universal application for switchgear with a dimensional difference between the mounting level and the upper edge of the contact level of 20 ± 5 mm Support rails 35 x 15 mm for ◾ Circuit-breaker component adaptor ◾ Mini-PLS component adaptor To fit Model No. Width mm 9342.400 9342.410 9629.000 72 Approvals Packs of Model No. 5 pc(s). 9320.120 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws and side anti-slip guard Rittal Catalogue 34/Power distribution 261 RiLine accessories for bus-mounting fuse bases Contact hazard protection covers To fit Model No. Packs of Model No. 3418.010 (D 02-E 18) 10 pc(s). 3418.020 for bus-mounting fuse bases The cover ensures contact hazard protection from the front, top and below. All-round contact hazard protection (up to IP 2X) in conjunction with the side cover 3093.010/.020. 3427.010 (D II-E 27) 10 pc(s). 3427.020 3433.010 (D III-E 33) 10 pc(s). 3433.020 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Covers, side To fit Model No. Packs of Model No. for bus-mounting fuse bases For clip-on mounting onto the contact hazard protection cover. 3418.010 (D 02-E 18) 10 pc(s). 3093.010 3427.010 (D II-E 27) 3433.010 (D III-E 33) 10 pc(s). 3093.020 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 Connection space extenders, side To fit Model No. Packs of Model No. 3418.010 (D 02-E 18) 10 pc(s). 3418.030 for bus-mounting fuse bases All-round contact hazard protection cover including cable duct for side extension of the connection space by 14 mm. 3427.010 (D II-E 27) 10 pc(s). 3427.030 3433.010 (D III-E 33) 10 pc(s). 3433.030 Material: – Polyamide (PA 6.6) – Fire protection corresponding to UL 94-V0 262 Rittal Catalogue 34/Power distribution RiLine accessories for NH fuse-switch disconn./NH slimline fuse-switch disconn. Box terminals Technical details: Available on the Internet for NH disconnectors, sizes 1 to 3 with screw terminal For direct connection of round and sector-shaped conductors and laminated copper bars. Material: – Cast brass Surface finish: – Nickel-plated To fit NH disconnectors Clamping area for laminated copper bars, W x H mm Connection Round conductor mm2 Sector-shaped conductor mm2 Packs of Model No. Size 1 20 x 14 35 – 150 50 – 150 3 pc(s). 9344.610 Size 2/3 32 x 20 95 – 300 120 – 300 3 pc(s). 9344.620 To fit NH disconnectors Packs of Model No. Size 00 2 pc(s). 9344.520 Size 1 2 pc(s). 9344.530 Size 2 2 pc(s). 9344.540 Size 3 2 pc(s). 9344.550 Connection space covers for NH disconnectors For extending the contact hazard protection cover, e.g. when using ring terminals with a long collar. Bayable as required at the top and bottom. Material: – Polyamide (PA 6) Colour: – RAL 7035 Technical details: Available on the Internet Arc chambers Packs of Model No. for NH disconnectors, sizes 1 to 3 To increase switching capacity (utilisation category). 3 pc(s). 9344.680 Technical details: Available on the Internet Micro-switch for NH disconnectors/NH slimline fuse-switch disconnectors To indicate the switch position of the NH unit (cover). 1) To fit NH disconnectors To fit NH slimline fuse-switch disconnectors Size 000/00 Sizes 1/2/3 5 pc(s). 3071.000 Sizes 1/2/3 – 2 pc(s). 9344.5101) – Size 00 5 pc(s). 9346.400 Packs of Model No. 1 Including plastic lug for attaching the microswitch to the disconnector chassis 2 Rittal Catalogue 34/Power distribution 263 RiLine accessories for NH slimline fuse-switch disconnectors Connection space cover for NH slimline fuse-switch disconnectors, size 00 Extended version for the use of ring terminals with a long collar. To fit Model No. Packs of Model No. 9346.000/.010/.015 9346.020/.030/.060 1 pc(s). 9346.460 Material: – Polycarbonate Clamp-type terminal connection Packs of Model No. 1 set(s) 3592.010 Box terminals Packs of Model No. for NH slimline fuse-switch disconnectors, sizes 1 to 3 For converting NH slimline fuse-switch disconnectors to box terminal connection for round conductors up to 300 mm2. 3 pc(s). 9346.450 for NH slimline fuse-switch disconnectors, size 00 with screw terminal For the connection of round conductors 1.5 to 95 mm2. Material: – Cast brass Surface finish: – Nickel-plated Technical details: Available on the Internet Material: – Cast brass Surface finish: – Nickel-plated Busbar terminals For size 00 for NH slimline fuse-switch disconectors For mounting NH slimline fuse-switch disconnectors on bar systems with 185 mm centre-to-centre spacing, no drilling required. To fit Model No. Packs of Model No. 9346.040/.050 3 pc(s). 9346.470 To fit Model No. Packs of Model No. 9346.110/.210/.310 9346.115/.215/.315 3 pc(s). 9346.440 For sizes 1 to 3 264 Rittal Catalogue 34/Power distribution RiLine accessories for NH slimline fuse-switch disconnectors Current converter ◾ Compact design without altering the installation depth via mechanical integration into the fuseswitch disconnector (sizes 1 to 3); this allows space-saving assembly ◾ User-friendly cable connection via terminal block for NH slimline fuse-switch disconnectors For size 00 1 9346.050 (185 mm bar centre distance) For NH slimline fuse-switch disconnectors Phases Primary current I1N Secondary current I2N Accuracy class 1 1 150 A 150 A 1A 5A 1 1 50 – 60 Hz 50 – 60 Hz Thermal rated continuous current 1.2 x I1N 1.2 x I1N Thermal rated short-time withstand current Ith 60 x I1N 60 x I1N 2.5 x Ith, max. 120 kA 2.5 x Ith, max. 120 kA Overcurrent limiting factor (FS) FS 5 FS 5 Insulation voltage 3 kV 3 kV Rated frequency Rated surge current Idyn Insulating material category Material 1 E E Fibreglass-reinforced polycarbonate Fibreglass-reinforced polycarbonate Screw terminal M5 Screw terminal M5 Connection Rated output 2.5 VA 2.5 VA Packs of 3 pc(s). 3 pc(s). 9346.560 9346.570 Model No. 2 For sizes 1 to 3 9346.110/.115/.210/.215/.310/.315 (185 mm bar centre distance) For NH slimline fuse-switch disconnectors Primary current I1N Secondary current I2N Accuracy class Rated frequency Thermal rated continuous current Thermal rated short-time withstand current Ith 250 A 250 A 400 A 400 A 600 A 600 A 1A 5A 1A 5A 1A 5A 1 1 1 1 1 1 50 – 60 Hz 50 – 60 Hz 50 – 60 Hz 50 – 60 Hz 50 – 60 Hz 50 – 60 Hz 1.2 x I1N 1.2 x I1N 1.2 x I1N 1.2 x I1N 1.2 x I1N 1.2 x I1N 2.5 x Ith, Max. 120 kA 2.5 x Ith, Max. 120 kA 2.5 x Ith, Max. 120 kA 2.5 x Ith, Max. 120 kA 2.5 x Ith, Max. 120 kA 2.5 x Ith, Max. 120 kA Overcurrent limiting factor (FS) FS 5 FS 5 FS 5 FS 5 FS 5 FS 5 Insulation voltage 3 kV 3 kV 3 kV 3 kV 3 kV 3 kV E E E E E E Polyamide PA 6 Polyamide PA 6 Polyamide PA 6 Polyamide PA 6 Polyamide PA 6 Polyamide PA 6 Rated surge current Idyn Insulating material category Material Connection (box terminal) Rated output Packs of Model No. 2 60 x I1N, 60 x I1N, 60 x I1N, 60 x I1N, 60 x I1N, 60 x I1N, max. 50 kA max. 50 kA max. 50 kA max. 50 kA max. 50 kA max. 50 kA 1.5 – 4 mm2 1.5 – 4 mm2 1.5 – 4 mm2 1.5 – 4 mm2 1.5 – 4 mm2 1.5 – 4 mm2 5 VA 5 VA 5 VA 5 VA 5 VA 5 VA 1 pc(s). 1 pc(s). 1 pc(s). 1 pc(s). 1 pc(s). 1 pc(s). 9346.600 9346.630 9346.610 9346.640 9346.620 9346.650 Cable ties Packs of Model No. for NH slimline fuse-switch disconnectors, sizes 1 to 3 For rear routing of the current converter cables. 1 pc(s). 9346.480 Material: – Polyamide (PA 6) Rittal Catalogue 34/Power distribution 265 266 Rittal Catalogue 34/Power distribution Ri4Power Modular system ◾ For low-voltage switchgear with design certificate to IEC 61 439-1/-2 and DIN EN 61 439-1/-2 ◾ For control systems and power distributors ◾ Structured system solution for switchgear with Form separation 1-4b ◾ Simple, assembly-friendly system layout Busbar systems up to 5500 A ◾ RiLine – The compact busbar system up to 1600 A, see page 211 ◾ Maxi-PLS – The assembly-friendly system, see page 268 ◾ Flat-PLS – The flat bar system for standard requirements, see page 271 ◾ Tested PE conductor system, see page 648 ◾ High levels of short-circuit withstand (I cw) up to 100 kA for 1 sec./220 kA peak Modular enclosure system ◾ Based on enclosure platform TS 8, see page 76 ◾ Flexible, modular front design, see page 552 ◾ Roof plates to suit most requirements, see page 583 ◾ Modular compartment configuration for internal compartmentalisation up to Form 4b, see page 283 ◾ Inner contact hazard protection covers for air circuit-breakers and NH slimline fuse-switch disconnectors, see page 281 ◾ Accessories for Ri4Power, see page 289 Simple planning ◾ Rittal Power Engineering with update function Model No. 3020.500, see page 295 ◾ Configuration of low-voltage switchgear with design certificate ◾ Simple, fast assembly with automatically generated assembly plan ◾ Generation of parts lists with graphical output Rittal Catalogue 34/Power distribution 267 Busbar systems Maxi-PLS System components Note: – Busbars for PE/PEN combinations, see page 648/649 Technical details: Available on the Internet Packs of Supports and attachment in the TS enclosure Maxi-PLS 1600/2000 Model No. 3-pole Maxi-PLS 3200 Model No. 4-pole 3-pole 4-pole A Busbar support Material: Polyamide (PA 6.6) 1 pc(s). 9649.000 9659.000 B Busbar support, suitable for top mounting Material: Polyamide (PA 6.6) 1 pc(s). 9649.160 9659.160 C End supports Material: Polyamide (PA 6.6) 2 pc(s). 9649.010 9659.010 Bar centre distance mm Packs of Model No. Model No. 100 2 pc(s). 9640.080 – 150 2 pc(s). – 9650.100 800 150 2 pc(s). – 9650.080 – 9650.098 D A B C D System attachment for installation in the busbar support. Material: Stainless steel For application D1 D2 D1 In the roof/base section, directly above/below the coupling switch For enclosure depth mm 600 D2 Rear section top/bottom – 150 2 pc(s). D3 Rear section, centre (185 mm) – 185 2 pc(s). D3 A Maxi-PLS busbars, E-Cu For enclosure width mm A B b c b For application1) Length mm 4-pole 9640.150 – 9650.150 – Maxi-PLS 1600 Maxi-PLS 2000 Packs of Model No. Maxi-PLS 3200 Model No. a 491 1 pc(s). 9640.206 9640.201 9650.201 b 525 1 pc(s). 9640.216 9640.211 9650.211 600 c 599 1 pc(s). 9640.226 9640.221 9650.221 800 a 691 1 pc(s). 9640.236 9640.231 9650.231 800 b 725 1 pc(s). 9640.246 9640.241 9650.241 800 c 799 1 pc(s). 9640.256 9640.251 9650.251 1000 a 891 1 pc(s). 9640.266 9640.261 9650.261 1000 b 925 1 pc(s). 9640.276 9640.271 9650.271 1000 c 999 1 pc(s). 9640.286 9640.281 9650.281 1200 a 1091 1 pc(s). 9640.296 9640.291 9650.291 1200 b 1125 1 pc(s). 9640.306 9640.301 9650.301 1200 c 1199 1 pc(s). 9640.316 9640.311 9650.311 – – 2400 3 pc(s). 9640.365 9640.360 9650.360 – – 2400 4 pc(s). – 9649.360 9659.360 1 pc(s). 9640.191 9640.191 9650.191 B Longitudinal connector E-Cu for simple baying connection of Maxi-PLS busbars. Incl. sliding blocks, bolts, washers and nuts. a = Cable connection system with end support b = Left-hand or right-hand end enclosure in a switchgear installation c = Bayed enclosure with sections bayed on the left and right Contact hazard protection 268 3-pole 600 1) A 4-pole 600 a B 3-pole Packs of Model No. Model No. A Cover section for clip-on mounting on the Maxi-PLS busbars, length 1000 mm. Material: Hard PVC 5 pc(s). 9640.050 9650.050 B End cover for clip-on mounting on the end surface of Maxi-PLS busbars. Material: Polyamide (PA 6.6) 2 pc(s). 9649.060 9659.060 Rittal Catalogue 34/Power distribution Busbar systems Maxi-PLS System components Packs of Connection system Maxi-PLS 1600/2000 Maxi-PLS 3200 Model No. Model No. Contact maker E-Cu for contacting the connection brackets to the Maxi-PLS busbars. Incl. sliding blocks. 60 1 pc(s). 9640.171 9650.171 100 1 pc(s). 9640.181 9650.181 Width mm Connection clamp for the connection of round conductors (Cu/Al) 95 to 300 mm² (single-wire and multi-wire). Incl. assembly parts. 1 pc(s). 9640.325 9650.325 Connection plates for the connection of laminated flat copper bars. Assembly parts. Maximum clamping area mm 2 x 10 x 32 x 1 3 pc(s). 9640.330 9650.330 2 x 10 x 63 x 1 3 pc(s). 9640.340 9650.340 2 x 10 x 100 x 1 3 pc(s). 9640.350 – Length 30 mm Length 32 mm Terminal stud for connecting cables with ring terminals, including sliding blocks. M12 3 pc(s). 9640.370 9650.370 M16 3 pc(s). 9640.380 9650.380 Thread Sliding blocks for sliding into the Maxi-PLS busbar section at the sides. Thread M8 Length 20 mm 15 pc(s). 9640.970 – M10 Length 25 mm 15 pc(s). 9640.980 9650.980 M12 Length 35 mm 15 pc(s). – 9650.990 15 pc(s). 9640.900 9650.900 15 pc(s). 9640.910 – 3 pc(s). – 9650.905 M10 15 pc(s). 9640.920 9650.910 M12 15 pc(s). – 9650.920 Sliding nuts for retrospective insertion into the Maxi-PLS busbar section. M6 Thread M8 Threaded bolts for individual connection options. Including nuts, plain washers, spring lock washers (M6 and M8 only) or washers (M10 and M12 only). Note: Sliding blocks or sliding nuts are additionally required for attachment. Thread Rittal Catalogue 34/Power distribution M6 Length 35 mm 6 pc(s). 9640.930 9640.930 M8 Length 35 mm 6 pc(s). 9640.940 9640.940 M10 Length 35 mm 8 pc(s). 9676.971 9676.971 M10 Length 45 mm 8 pc(s). 9676.972 9676.972 M10 Length 55 mm 8 pc(s). 9676.973 9676.973 M10 Length 70 mm 8 pc(s). 9676.976 9676.976 M10 Length 80 mm 8 pc(s). 9676.977 9676.977 M12 Length 40 mm 8 pc(s). – 9676.981 M12 Length 50 mm 8 pc(s). – 9676.982 M12 Length 60 mm 8 pc(s). – 9676.983 M12 Length 70 mm 8 pc(s). – 9676.986 M12 Length 80 mm 8 pc(s). – 9676.987 269 Busbar systems Maxi-PLS System components Connection system Packs of Model No. 1 set(s) 9660.980 Compact infeed for Maxi-PLS busbar 1600/2000 For individual use as a 3-pole cable connection bar system. Direct mounting on the mounting plate or on the punched section without mounting flange. Supply includes: 6 end supports, 2 support plates for end supports, 1 PS punched rail, 23 x 23 mm (length 495 mm), mounting accessories Shielding Maxi-PLS 1600/2000 Maxi-PLS 3200 Model No. Model No. 9660.620 9660.620 9660.610 9660.610 A Divider panel for TS enclosures. For side shielding from neighbouring panels. Assembly parts. Maxi-PLS busbars in the roof section B For enclosure depth mm For enclosure height mm Packs of 600 2000 1 pc(s). For enclosure depth mm For enclosure height mm Packs of 600 2000 1 pc(s). Maxi-PLS busbars in the rear section A B Busbar gland The busbar gland may also be used as a cover for the longitudinal connectors. Including assembly parts. Use with longitudinal connector Accessories B 270 Packs required Packs of – 6 – – – no yes ◾ ◾ 1600/2000 3200 3-pole 4-pole 3-pole 1 set(s) 9640.600 – 9650.600 4-pole – 8 1 set(s) – 9640.600 – 9650.600 ◾ 3 3 1 set(s) 1 set(s) 9640.610 + 9640.600 – 9650.610 + 9650.600 – ◾ 4 4 1 set(s) 1 set(s) – 9640.610 + 9640.600 – 9650.610 + 9650.600 Power Engineering see page 295 Rittal Catalogue 34/Power distribution Busbar systems Flat-PLS System components Busbar system Flat-PLS 60/ Flat-PLS 100, for flat copper bars For the configuration of busbar systems from flat copper bars. For mounting on a system attachment or directly on the mounting plate. Also suitable for aluminium and copperplated aluminium bars. Max. admissible tolerance of bar width (60/100 mm) ± 0.3 mm, bar thickness (10 mm) ± 0.15 mm Technical details: Available on the Internet Supports and attachment in the TS enclosure Flat-PLS 60 Flat-PLS 100 Model No. Model No. A Busbar support Material: Polyamide (PA 6.6) D For busbars up to mm1) System Packs of Flat-PLS 60 4 x 60 x 10 1 pc(s). 9676.002 – Flat-PLS 100 4 x 100 x 10 1 pc(s). – 9676.004 For busbars up to mm1) Packs of B Busbar support for stabiliser bar Material: Polyamide (PA 6.6) A System Flat-PLS 60 4 x 60 x 10 1 pc(s). 9676.020 – Flat-PLS 100 4 x 100 x 10 1 pc(s). – 9676.021 D System attachment for installation in the busbar support. Material: Stainless steel D For application D1 B C For enclosure depth mm In the roof/base section/directly above/below coupling switch 600 800 600 D2 Vertical coupling set 800 D1 D3 D3 Rear section top/bottom – D4 D5 Rear section, centre (185 mm) Bar centre distance mm 120 165 185 Packs of 3-pole 4-pole 3-pole 4-pole – ◾ – – 2 pc(s). 9674.162 9674.162 – – ◾ – 2 pc(s). – – 9674.164 – ◾ – – 2 pc(s). 9674.182 9674.182 – – – ◾ – 2 pc(s). – – 9674.184 9674.184 ◾ – – 2 pc(s). 9674.172 9674.172 – – – ◾ – 2 pc(s). – – 9674.174 – ◾ – – 2 pc(s). 9674.192 9674.192 – – 9674.194 – ◾ – 2 pc(s). – – 9674.194 ◾ – – 2 pc(s). 9674.122 9674.122 – – – ◾ – 2 pc(s). – – 9674.124 9674.124 – – ◾ 2 pc(s). 9674.152 – – – – – ◾ 2 pc(s). – – 9674.154 – 2 pc(s). 9674.102 9674.102 9674.104 9674.104 Single-pole assembly, for mounting on the TS frame C Busbar stabiliser bars Material: Stainless steel D2 D4 D5 For busbar support 9676.020 9676.021 1) Bar centre distance mm System layout Packs of 3-pole 4-pole 3-pole 4-pole 120 3/4-pole 2 pc(s). 9676.022 9676.023 – – 185 3-pole 2 pc(s). 9676.026 – – – 165 3/4-pole 2 pc(s). – – 9676.024 9676.025 185 3-pole 2 pc(s). – – 9676.027 – At a bar width of < 60 mm for Flat-PLS 60 or < 100 mm for Flat-PLS 100, the empty gaps in the support should be filled with spacers. When using only 1, 2 or 3 bars, the vacant bar slots should be closed using the filler pieces. Rittal Catalogue 34/Power distribution 271 Busbar systems Flat-PLS System components Busbars and accessories for supports Flat-PLS 60 Flat-PLS 100 Model No. Model No. A Busbars E-Cu to DIN EN 13 601. Length: 2400 mm/bar E Dimensions mm Packs of 40 x 10 3 pc(s). 3587.000 – 50 x 10 2 pc(s). 3588.005 – 60 x 10 2 pc(s). 3589.005 – 80 x 10 1 pc(s). – 3590.005 100 x 10 1 pc(s). – 3590.015 9676.007 9676.007 E A D B Spacer – At a bar width of < 60/100 mm the spacer should be used. Material: Polyamide (PA 6.6) E-Cu Dimensions mm B Required number of spacers Packs of per chamber 40 x 10 2 pc(s). 50 x 10 1 pc(s). 80 x 10 2 pc(s). 16 pc(s). C Filler piece – When using only 1, 2 or 3 bars, the vacant bar slots should be closed using the filler pieces. Material: Polyamide (PA 6.6) C Packs of Flat-PLS 60 2 per free bar slot Flat-PLS 100 3 per free bar slot 16 pc(s). 9676.008 9676.008 D Longitudinal connector E-Cu for connecting Flat-PLS busbar systems, no drilling required. 1) No. of strands per conductor For busbar width mm Screw Packs of 2 40 – 100 1) 1 pc(s). 9676.621 9676.621 3 or 4 40 – 100 1) 1 pc(s). 9676.641 9676.641 Must be ordered additionally according to the busbar width B (length = B + 40 mm, screw connections, see page 273). E Busbar claws for Flat-PLS 1) For busbar width up to mm Screw Packs of 2 x B x 10 1) 1 pc(s). 9676.017 9676.017 4 x B x 10 1) 1 pc(s). 9676.019 9676.019 Flat-PLS 60 Flat-PLS 100 Model No. Model No. Must be ordered additionally according to the busbar width B (length = B + 20 mm, screw connections, see page 273) Contact hazard protection Cover sections for Flat-PLS Material: Hard PVC C B A D B A For system No. of bars per conductor For busbar width mm Length mm Packs of A Edge cover section for bar systems with no space between the strands 1 – 1000 10 pc(s). 9676.041 9676.041 A Edge cover section for bar systems with 10 mm space between the strands 2 – 1000 10 pc(s). 9676.052 9676.052 4 – 1000 10 pc(s). 9676.054 9676.054 B Side cover section for bar systems, to match the edge cover sections – 60 1000 10 pc(s). 9676.056 9676.056 – 80 1000 10 pc(s). 9676.058 9676.058 – 100 1000 10 pc(s). 9676.059 9676.059 9676.006 9676.006 C End covers for busbar supports Flat-PLS Material: Polyamide (PA 6.6) A B Packs of For Flat-PLS 60 and Flat-PLS 100 2 pc(s). D Covers for busbar claws Material: Polyamide (PA 6.6) 272 No. of bars per conductor For busbar claw Model No. 2 9676.017 9676.832 8 pc(s). 9676.046 9676.046 4 9676.019 8 pc(s). 9676.048 9676.048 Packs of Rittal Catalogue 34/Power distribution Busbar systems Flat-PLS System components Connection system Flat-PLS 60 Flat-PLS 100 Model No. Model No. 9676.730 9676.730 A Direct connection terminal for Flat-PLS For the direct connection of round conductors. A 1) B For round conductors Screw Packs of 95 – 300 mm2 re/rm 1) 1 pc(s). Must be ordered additionally according to the busbar width B (length = B + 60 mm, screw connections, see page 273) B Connection plates for laminated copper bars, including assembly parts (excluding screws) C 1) For busbar width mm Screw Packs of 2 x 10 x 32 x 1 1) 1 pc(s). 9676.747 9676.747 2 x 10 x 63 x 1 1) 1 pc(s). 9676.748 9676.748 2 x 10 x 100 x 1 1) 1 pc(s). 9676.749 9676.749 9676.710 9676.710 9676.700 9676.700 9676.832 9676.832 Must be ordered additionally according to the busbar width B (length = B + 50 mm, screw connections, see page 273) C Connection plates with bolts M10, including assembly parts (excluding screws) 1) D Terminal studs Screw Packs of M10 1) 1 pc(s). Must be ordered additionally according to the busbar width B (length = B + 40 mm, screw connections, see page 273) D Connection plates with bolts M12, including assembly parts (excluding screws) 1) Terminal studs Screw Bolt length mm Packs of M12 1) 30 1 pc(s). Must be ordered additionally according to the busbar width B (length = B + 20 mm, screw connections, see page 273) A Claw with threaded insert M10 B A Threaded insert Packs of M10 8 pc(s). Screw design Packs of M10 x 60 8 pc(s). 9676.806 9676.806 M10 x 70 8 pc(s). 9676.807 9676.807 M10 x 80 8 pc(s). 9676.808 9676.808 M10 x 90 8 pc(s). 9676.809 9676.809 M10 x 100 8 pc(s). 9676.810 9676.810 M10 x 110 8 pc(s). 9676.811 9676.811 M10 x 120 8 pc(s). 9676.812 9676.812 M10 x 130 8 pc(s). 9676.813 9676.813 M10 x 140 8 pc(s). 9676.814 9676.814 M10 x 150 8 pc(s). 9676.815 9676.815 M10 x 160 8 pc(s). 9676.816 9676.816 M10 x 170 8 pc(s). 9676.817 9676.817 M10 x 190 8 pc(s). 9676.819 9676.819 B Screw connections A Claw with threaded insert M8 for NH slimline fuse-switch disconnectors, size 00 For mounting NH slimline fuse-switch disconnectors size 00 on Flat-PLS bar systems with 185 mm centre-to-centre spacing. Note: M8 screws (zinc-plated and passivated, strength 8.8, length: busbar width + 20 mm) are additionally required. Screws are not included with the supply. A Threaded insert Packs of M8 3 pc(s). 9676.831 9676.831 A Contact makers E-Cu for contacting the connection brackets to the Flat-PLS busbars. For busbar width (B) mm Screw No. of strands per conductor Packs of 60 1) 2 1 pc(s). 9676.526 9676.526 60 1) 3 or 4 1 pc(s). 9676.546 9676.546 80 1) 2 1 pc(s). 9676.528 9676.528 80 1) 3 or 4 1 pc(s). 9676.548 9676.548 100 1) 2 1 pc(s). 9676.520 9676.520 100 1) 3 or 4 1 pc(s). 9676.540 9676.540 A B 1) Must be ordered additionally according to the busbar width B (screw connections, see page 273). Screw length = (no. of strands x 10 mm) + bar width of main busbar + 40 mm. No. of screws per bracket: – with 2 strands per conductor of the main busbar system: 2 pc(s). – with 3/4 strands per conductor of the main busbar system: 4 pc(s). Rittal Catalogue 34/Power distribution 273 Connection components for Maxi-PLS/Flat-PLS For open air circuit-breakers and busbar connections For connecting open air circuit-breakers (ACB) to Maxi-PLS/Flat-PLS busbar systems in TS enclosures. Alternatively, for connecting main and multi-terminal busbar systems and for connecting horizontal and vertical main busbar systems. Please include the design code of the specification given below in the order text for your connector kit. We recommend the Rittal Power Engineering 3020.500 software from Version 6.1 for easier configuration of the connector kits and connection brackets, see page 295. Material: – E-Cu Also required: Note: – Please quote the complete design code on all enquiries and orders – For configuration with the Rittal Power Engineering software, 2 check numbers are additionally output with a hyphen – Screw connections M10/M12, see page 280 – Terminal studs Maxi-PLS, see page 269 – Screw connections Flat-PLS, see page 273 – Spacer rolls, page 289 Design code Busbar system, bottom Enclosure Model No. a b c d e Busbar system, top Air circuit-breaker f g h i j k l Multiterminal MultiCompartbusbar terminal Busbar ment system, busbars configuheight, Type and in front of ration air circuitnumber or behind breaker of poles mounting plate m n o p Code length q 9676.910 Connector kit for ACB, top 14 9676.912 Connector kit for ACB, bottom 14 9676.200 Connection bracket above ACB 14 9676.210 Connection bracket below ACB 14 9675.100 T-connector kit 9 9675.840 Bracket connector kit 8 9674.480 Fuse-switch disconnector section connection bracket 8 Leave grey sections blank Enclosure Selection Width mm a 2 200 4 400 6 600 8 800 0 1000 1 1200 Height mm b b 0 2000 2 2200 Depth mm a 274 c c 6 600 8 800 Rittal Catalogue 34/Power distribution Connection components for Maxi-PLS/Flat-PLS For open air circuit-breakers and busbar connections Busbar system, bottom Busbar type Selection 1600 Maxi-PLS 2000 3200 60 d Flat-PLS 2 bars 3 bars Cu 100 4 bars RiLine60 (for T-connector kit only) PLS A 3-pole Cu 30 x 5/10 mm PLS 1600 4-pole B 3-pole C 4-pole D 3-pole E 4-pole F 3-pole I 4-pole J 3-pole M 4-pole N 3-pole Q 4-pole R 3-pole S 4-pole T No system available X Busbar system configuration Selection in the base section 6 in the lower rear section 7 as cable connection system 8 directly underneath the air circuit-breaker 9 e 0 No system available Air circuit-breaker Selection f g n Brand Size f/g/h/i/j k h 2) Rated current ABB A ABB (Emax2) B Eaton/Moeller E GE G Mitsubishi J Schneider Electric M Siemens/Moeller S Terasaki T Selection Static installation i 3 4-pole 4 3-pole with nonswitched N 5 3-pole 6 4-pole 8 Rack3-pole mounted with nonswitched N 7 Behind the door HT H V Various V 1/none 1 2 2 3 3 4 4 In front of the door (in door cut-out) VT 630 A A 0 mm 0 800 A B 150 mm 1 1000 A C 200 mm 2 1250 A D 250 mm 3 1600 A E 300 mm 4 2000 A F 400 mm 5 2500 A G 600 mm1) 6 3200 A H 800 mm 7 4000 A2) I 1000 mm 8 5000 A2) J 600 mm1) 6 800 mm 7 1000 mm 8 j k n Not available for all brands 1) Rittal Catalogue 34/Power distribution Number of poles/ Version 3-pole Position Compartment height directly beneath the air circuitbreaker Compartment height of air circuit-breaker Standard height in version 1 With version 1, a 6 should be selected 275 Connection components for Maxi-PLS/Flat-PLS For open air circuit-breakers and busbar connections Busbar system, top Busbar type Selection 1600 2000 Maxi-PLS 3200 60 l Flat-PLS 2 bars 3 bars 100 4 bars Cu 30 x 5/10 mm RiLine60 (for T-connector kit only) Cu PLS 1600 PLS 3-pole A 4-pole B 3-pole C 4-pole D 3-pole E 4-pole F 3-pole I 4-pole J 3-pole M 4-pole N 3-pole Q 4-pole R 3-pole S 4-pole T X No system available Busbar system configuration Selection in the roof section 1 in the top rear section m m 2 as cable connection system 600 mm 3 as cable connection system 800 mm 8 as cable connection system 1000 mm 9 directly above the air circuit-breaker 4 in rear centre section, version 1 5 0 No system available RiLine60 Multi-terminal busbar system Type and number of poles o Multi-terminal busbar system Multi-terminal busbar system in front of or behind mounting plate p in front of mounting behind mounting Cu 30 x 5/10 mm 3-pole Q RiLine60 Cu 30 x 5/10 mm 4-pole R RiLine60 PLS 1600 3-pole S RiLine60 PLS 1600 4-pole T Multi-terminal busbar fuse-switch disconnector section 3-pole E Multi-terminal busbar fuse-switch disconnector section 4-pole F In front of mounting plate (indoor) 1 Behind mounting plate 2 Bar configuration, busbar dimensions up to Version/bar configuration of the busbar systems to be connected q H–V HR – V H = Horizontal V = Vertical HR = Horizontal in the rear section, behind one another 276 Selection Maxi-PLS 1600/2000 H–V Maxi-PLS 1600/2000 HR – V B Maxi-PLS 3200 H–V C Maxi-PLS 3200 HR – V D up to 2 x 40 x 10 H–V E up to 2 x 60 x 10 H–V F up to 4 x 60 x 10 H–V G up to 4 x 40 x 10 H–V H up to 2 x 100 x 10 H–V I up to 4 x 80 x 10 H–V J up to 4 x 100 x 10 H–V K up to 2 x 60 x 10 HR – V L up to 4 x 60 x 10 HR – V M up to 2 x 100 x 10 HR – V N up to 4 x 100 x 10 HR – V O A Rittal Catalogue 34/Power distribution Connection components for Maxi-PLS/Flat-PLS For open air circuit-breakers and busbar connections Sample design code Busbar system, bottom Enclosure Model No. Multi-terMultiminal busCompartterminal bar system, Busbar ment busbars in front of configuheight, Type and or behind ration air circuitnumber of mounting breaker poles plate Busbar system, top Air circuit-breaker o p Code length a b c d e f g h i j k l m n Connector kit for 9676.910 ACB, top q 8 0 6 B 8 A 1 E 4 V 6 D 1 6 14 Connector kit for ACB, bottom 8 0 6 B 8 A 1 E 4 V 6 D 1 6 14 Connection bracket 9676.200 above ACB 8 0 6 B 8 A 1 E 4 V 6 D 1 6 14 Connection bracket below ACB 8 0 6 B 8 A 1 E 4 V 6 D 1 6 14 9675.100 T-connector kit 6 0 6 X 0 T 2 Bracket connector 9675.840 kit 2 0 6 B 9 X 0 Fuse-switch discon9674.480 nector section connection bracket 1 0 6 X 0 J 1 9676.912 9676.210 T 1 9 A F 8 8 Leave grey sections blank Example of 9676.910, 9676.912, 9676.200, 9676.210 Design code: 806B8A1E4V6D16 1 1 1 Maxi-PLS 2000 4-pole, in roof area 1 9675.100 2 2 9676.200 3 2 3 9676.910 4 ACB: ABB E1, 1600 A, 4-pole, VT 4 3 2000 2000 600 Example of 9675.100 Design code: 606X0T2T1 2 RiLine60, PLS 1600, 4-pole, in rear section, top 5 600 5 9676.912 6 7 6 9676.210 80 60 7 Maxi-PLS 1600, 4-pole, as cable connection system 0 0 60 Example of 9675.840 Design code: 206B9X0A 3 RiLine60, PLS 1600, 4-pole, in front of mounting plate 0 0 60 Example of 9674.480 Design code: 106X0J1F 1 1 1 Busbar system Vertical, Maxi-PLS 1600, 4-pole 1 9674.480 2000 2000 2 3 2 Flat-PLS 60, 4-pole, in the roof section 2 9675.840 2 3 3 Busbar system horizontal, Maxi-PLS 1600, 4-pole 20 0 60 0 12 0 0 0 60 3 Multi-terminal busbar system, 4-pole 0 60 Rittal Catalogue 34/Power distribution 277 Busbar systems (100/185/150 mm) NH slimline fuse-switch disconnector Page 246/248 NH fuse-switch disconnector Page 238 Accessories Page 289 Material: Busbar supports, inserts – Fibreglass-reinforced, thermoplastic polyester (PBT) – Fire protection corresponding to UL 94-V0 Colour: – RAL 7035 Technical details: Available on the Internet Note: – The base component of the busbar support 3052.000 may also be used as a single-pole support Busbar systems up to 1250 A (100 mm), 1600 A (185 mm), 2500 A (150 mm), 3000 A (150 mm) Packs of Busbar support, 3-pole Width x height x depth mm Inserts for a) Cross-section reduction to mm b) Reducing the bar width in 10 mm increments Bar centre distance mm Packs of B B 1600 A 22 x 320 x 70 24 x 515 x 51 Max. bar accommodation mm C Model No. A 1250 A C 2500 A C 3000 A 30 x 420 x 160 30 x 420 x 170 60 x 10 80 x 10 2 x 80 x 10 2 x 100 x 10 30 x 10 to 50 x 10 – 50/60 x 10 – – – ◾ ◾ 100 185 150 150 4 pc(s). 2 pc(s). 2 pc(s). 2 pc(s). 3073.000 3052.000 3055.000 3057.000 Page Accessories 30 x 10 mm 24 pc(s). 3074.000 – – – 40 x 10 mm 24 pc(s). 3075.000 – – – 50 x 10 mm 24 pc(s). 3076.000 3074.000 – – 60 x 10 mm 24 pc(s). – 3075.000 – – Spacing element for reducing the bar width in 10 mm increments 12 pc(s). – – 3056.000 3056.000 D System attachment for rear section Material: Sheet steel Surface finish: Zinc-plated Supply includes: Assembly parts 2 pc(s). – 9674.100 – – 30 x 10 3 pc(s). 3586.005 – – – 40 x 10 3 pc(s). 3587.000 – – – 50 x 10 2 pc(s). 3588.005 3588.005 – – 60 x 10 2 pc(s). 3589.005 3589.005 3589.005 3589.005 Inserts to adapt the bar dimensions A Busbars E-Cu1) to DIN EN 13 601, length 2400 mm Dimensions mm 80 x 10 1 pc(s). – 3590.005 3590.005 3590.005 100 x 10 1 pc(s). – – – 3590.015 30 x 10 mm 4 pc(s). 9661.350 – – – 40 x 10 mm 4 pc(s). 9661.050 – – – 80 x 10 mm 4 pc(s). – 9661.150 – – – 9676.6212) 9676.6212) 252 Accessories Baying bracket E-Cu for Longitudinal connector for 2 x bar width x 10 mm 1) For other busbar lengths, see page 648 278 2) 1 pc(s). – 649 272 The required screw must be ordered separately according to the bar width, see page 273 Rittal Catalogue 34/Power distribution Busbar systems (100/185/150 mm) Packs of Contact hazard protection Model No. 1600 A 2500 A 3000 A 10 pc(s). 3083.000 – – – 30 x 10 mm 10 pc(s). 3092.000 – – – 40 x 10 to 60 x 10 mm 10 pc(s). 3085.000 3085.000 – – for 1 busbar per conductor 10 pc(s). 9676.041 Edge cover section for bar A systems with 10 mm space between the strands, length 1 m for 2 busbars per conductor 10 pc(s). – 9676.041 – – – 9676.052 9676.052 9676.056 9676.056 9676.056 End covers for busbar supports 1250 A Busbar cover section, length 1 m for E-Cu A B 253 272 For busbar width Side cover section for bar B systems, to match the edge cover sections, length 1 m B A Page 60 mm 10 pc(s). 9676.056 80 mm 10 pc(s). 9676.058 9676.058 9676.058 9676.058 100 mm 10 pc(s). 9676.059 9676.059 9676.059 9676.059 – Connection system, see page 257 (system accessories) A Plate clamps for connecting laminated copper bars; no drilling required A C B For busbars mm Clamping area for laminated copper bars mm 30 x 10 34 x 10 3 pc(s). 3554.000 – – 40 x 10 34 x 10 3 pc(s). 3559.000 – – – 50 x 10 34 x 10 3 pc(s). 3560.000 3560.000 – – 50 x 10 54 x 10 3 pc(s). 3562.000 3562.000 – – 60 x 10 34 x 10 3 pc(s). 3561.000 3561.000 – – 60 x 10 54 x 10 3 pc(s). 3563.000 3563.000 – – 80 x 10 65 x 10 3 pc(s). – 3460.500 – – 257 Conductor connection clamps for 10 mm bar thickness Connection of round conductors1) mm² Clamping area for laminated copper bars mm B 1–4 – 15 pc(s). 3555.000 3555.000 3555.000 3555.000 1–4 – 15 pc(s). 3455.500 3455.500 3455.500 3455.500 2.5 – 16 8x8 15 pc(s). 3456.500 3456.500 – – C 16 – 50 10.5 x 11 15 pc(s). 3457.500 3457.500 – – 35 – 70 16.5 x 15 15 pc(s). 3458.500 3458.500 – – 70 – 185 22.5 x 20 15 pc(s). 3459.500 3459.500 – – D 257 D System covers for conductor connection clamps and plate clamps 230 – 325 Width x depth mm 50 x 80 4 pc(s). 3086.000 – – – 100 x 80 4 pc(s). 3087.000 – – – 100 x 110 4 pc(s). 3090.000 – – – 200 x 80 4 pc(s). 3088.000 – – – 200 x 110 4 pc(s). 3091.000 – – – 257 E Inserted screw nuts M12, self-holding nuts with knurled ring for mounting NH slimline fuse-switch disconnectors E For drilled holes in busbars Ø 14.5 mm 30 pc(s). 3591.060 3591.060 – – 253 F Connection plates for laminated copper bars F Connection of laminated copper bars 2 x 10 x 100 x 1.0 mm on a busbar system with two bars per conductor For laminated copper bars up to 2 x 10 x 32 x 1 mm 1 pc(s). – – 9676.7472) 9676.7472) 2 x 10 x 63 x 1 mm 1 pc(s). – – 9676.7482) 9676.7482) 2 x 10 x 100 x 1 mm 1 pc(s). – – 9676.7492) 9676.7492) 1 pc(s). – – 9676.7302) 9676.7302) 273 G Direct connection terminals G For the connection of round conductors 95 – 300 mm2 (single or multi-wire) 1) 2) 273 Wire end ferrules should be used with fine and extra-fine wire conductors The required screw connection must be ordered additionally according to the busbar width, see page 273 Rittal Catalogue 34/Power distribution 279 Connector kits for Maxi-PLS/Flat-PLS System accessories Screw connections Material: – Steel screws, zinc-plated, passivated for connection brackets For connecting connection brackets and a connector kit. May be used for 3- and 4-pole connector kits. Supply includes: – 8 nuts and 16 washers Note: – For a bar width of 120 mm, 2 packs are required per connector kit Technical details: Available on the Internet For systems Screw type Maxi-PLS1) 1600/2000/3200 M10 x 40 M10 x 60 M10 x 80 Maxi-PLS2) 1600/2000/3200 and Flat-PLS 60/100 1) 2) No. of bars per phase Packs of Model No. 1 8 pc(s). 9676.966 2 8 pc(s). 9676.967 3 8 pc(s). 9676.968 M12 x 40 1 8 pc(s). 9676.961 M12 x 60 2 8 pc(s). 9676.962 M12 x 80 3 8 pc(s). 9676.963 For connection bracket width 60/80 mm For connection bracket width 100/120 mm Stacking insulator Packs of Model No. To support the connector kits top/bottom for circuitbreakers. Easily retro-fitted. 6 pc(s). 9660.200 Supply includes: – Assembly parts Support rails for stacking insulator For attaching to the outer mounting level of the TS enclosure and for the configuration of stacking insulators. C rail may also be used as cable management rail. Technical details: Available on the Internet For enclosure width mm Packs of Model No. 600 2 pc(s). 9676.196 800 2 pc(s). 9676.198 For enclosure width mm Packs of Model No. 600 2 pc(s). 9676.186 800 2 pc(s). 9676.188 Material: – Sheet steel, zinc-plated Supply includes: – Assembly parts Stabiliser for connector kit To increase short-circuit withstand ratings of the connector kits from 75 kA to 100 kA, 1 sec. 2 stabilisers are required per connector kit. May be used for 3- and 4-pole connector kits. One stabiliser is used in place of a normal stacking insulator arrangement. Material: – Reinforcement section: Fibreglass-reinforced plastic Also required: – Support rail for stacking insulator, see page 280 Supply includes: – 2 reinforcement sections – 10 stacking insulators – Assembly parts 280 Rittal Catalogue 34/Power distribution Cover systems Form 1 Device module For use in air circuit-breaker outgoing/incoming sections with a minimum depth of 600 mm. The removable mounting plate may be used for the configuration e.g. of fuses, air circuit-breakers and switchgear. Supply includes: – 2 side parts – 2 centre parts – Connector parts – Mounting plate A Material: – Side parts, centre parts: Sheet steel – Mounting plate: Sheet steel, zinc-plated Note: – Please observe the manufacturer-specific data regarding the arcing space of air circuit-breakers – 4 mounting brackets are required to attach a device module Colour: – Side parts, centre parts: RAL 7035 Technical details: Available on the Internet For enclosure width mm 600 Mounting plate Packs of Model No. 250 1 pc(s). 9660.700 250 1 pc(s). 9660.710 24 pc(s). 9660.090 800 Width mm Height mm ◾ – 420 – ◾ 620 Page A Also required Mounting bracket Contact hazard protection cover For TS enclosures with air circuit-breaker To cover incoming and outgoing sections and NH slimline fuse-switch disconnectors with the Maxi-PLS busbar system in the rear enclosure section so that they are safe from finger contact (IP2X). 282 Note: – Cut-outs for air circuit-breakers must be provided by the customer – 12 mounting brackets are required to attach the contact hazard protection cover B Technical details: Available on the Internet Material: – Sheet steel Colour: – RAL 7035 Supply includes: – 3 front covers For enclosures, 1-door Width mm Device module version B 600 800 Height mm ◾ – 2000 ◾ – 1 set(s) 9660.280 ◾ – 2000 – ◾ 1 set(s) 9660.780 – ◾ 2000 ◾ – 1 set(s) 9660.380 – ◾ 2000 – ◾ 1 set(s) 9660.880 24 pc(s). 9660.090 With Without Packs of Model No. Page Also required Mounting bracket Rittal Catalogue 34/Power distribution 282 281 Cover systems Form 1 Contact hazard protection cover C Note: – 12 mounting brackets are required to attach the contact hazard protection cover For TS enclosures with NH slimline fuse-switch disconnectors To cover incoming and outgoing sections and NH slimline fuse-switch disconnectors with the Maxi-PLS busbar system in the rear enclosure section so that they are safe from finger contact (IP2X). Technical details: Available on the Internet Material: – Sheet steel Colour: – RAL 7035 C Supply includes: – 3 front covers – 2 depth covers – 2 side covers – Connector parts Free installation width mm1) when using longitudinal connectors For enclosures Packs of Model No. 400 1 set(s) 9660.460 600 1 set(s) 9660.470 850 800 1 set(s) 9660.480 1050 1000 1 set(s) 9660.490 24 pc(s). 9660.090 Size 00 4 pc(s). 9660.180 282 Sizes 1 to 3 4 pc(s). 9660.190 282 Width mm Height mm Depth mm Without One side Both sides 600 2000 600 500 450 800 2000 600 700 650 1000 2000 600 900 1200 2000 600 1100 Page Also required Mounting bracket 282 Accessories Blanking cover for NH fused isolators 1) When using the top-mounted busbars 9649.160/9659.160, see page 268. Longitudinal connectors 9640.191/9650.191 for Maxi-PLS busbars, see page 268. Mounting bracket Packs of Model No. For attaching the device modules and contact hazard protection covers. Tapped hole M6. 24 pc(s). 9660.090 Material: – Sheet steel 15 40 Surface finish: – Zinc-plated Supply includes: – Assembly screws Blanking covers To cover free NH slimline fuse-switch disconnector slots. Material: – Sheet steel For NH slimline fuse-switch disconnectors Width (B) mm Packs of Model No. Size 00 49.5 4 pc(s). 9660.180 Sizes 1 to 3 99.5 4 pc(s). 9660.190 Colour: – RAL 7035 Supply includes: – Assembly screws 282 600 579 Surface finish: – Spray-finished B Rittal Catalogue 34/Power distribution Compartment configuration Form 1-4 Compartment side panel modules Material: – Sheet steel, 1.5 mm for internal compartmentalisation ◾ Side divider panel for compartments, for locating into the TS pitch pattern ◾ Prepared for the location of mounting brackets for horizontal compartment dividers or mounting plates ◾ Two TS system punchings in the side panel module allow the use of additional TS accessories ◾ The side panel modules for reduced compartment depth and an auxiliary construction using TS punched rails 17 x 17 mm can be used to provide a separate enclosure space in the side panel area, e.g. for the provision of a busbar system Surface finish: – Zinc-plated Supply includes: – Assembly parts Accessories: – – – – – Gland plates, see page 284 TS punched rail 17 x 17 mm, see page 615 Frame connector piece, see page 622 T-connector piece, see page 622 Corner connector, see page 622 With pre-punched knockouts for gland plate for cable entry Packs of Model No. 2 – 6 pc(s). 9673.051 – 3 6 pc(s). 9673.055 425 – 3 6 pc(s). 9673.052 100 600 2 – 6 pc(s). 9673.061 150 600 – 3 6 pc(s). 9673.065 200 600 – 3 6 pc(s). 9673.062 300 600 – 3 2 pc(s). 9673.063 400 600 – 3 2 pc(s). 9673.064 600 600 – 9 2 pc(s). 9673.066 100 800 2 – 6 pc(s). 9673.081 150 800 – 3 6 pc(s). 9673.085 200 800 – 3 6 pc(s). 9673.082 300 800 – 3 2 pc(s). 9673.083 400 800 – 3 2 pc(s). 9673.084 600 800 – 9 2 pc(s). 9673.086 For compartment depth mm With pre-punched knockouts for cable entries M40 100 425 150 425 200 Height mm Compartment side panel modules for cable connection space For mounting a Maxi-PLS cable connection bar system. Material: – Sheet steel, 2 mm Surface finish: – Zinc-plated Supply includes: – Assembly parts Model No. Height mm Packs of For enclosure depth mm 600 800 450 2 pc(s). 9673.069 9673.089 Suitable for cable connection busbar system Maxi-PLS Number of poles 1600/2000 3-pole ◾ ◾ 1600/2000 4-pole ◾ ◾ 3200 3-pole ◾ ◾ 3200 4-pole – ◾ Also required: – End support, see page 268 Accessories: – 2 compartment side panel modules for internal compartmentalisation with height 150 mm, see page 283 Rittal Catalogue 34/Power distribution 283 Compartment configuration Form 1-4 Gland plates for compartment side panel modules (internal compartmentalisation) For closing cable entries. For side panel modules height mm Packs of Model No. 150 10 pc(s). 9673.195 200/600 10 pc(s). 9673.192 300 4 pc(s). 9673.193 400 4 pc(s). 9673.194 Material: – PVC, 3 mm – Fire protection corresponding to UL 94-V0 Colour: – RAL 7004 Supply includes: – Assembly parts Terminal box Form 4b for modular outgoing section For shielding the connections (terminals) of the compartment, busbar space and cable chamber in accordance with Form 4b to IEC 61 439-2. The terminal boxes are externally mounted on the compartment side panel modules in the cable chamber to match the heights of the compartments. If necessary, a clamping strip may be mounted on the cable retainer included with the supply. Material: – Sheet steel, 1.5 mm For compartment height mm For cable chamber width mm Packs of Model No. 150 400/600 1 set(s) 9674.701 200 400/600 1 set(s) 9674.702 300 400/600 1 set(s) 9674.703 400 400/600 1 set(s) 9674.704 600 400/600 1 set(s) 9674.706 Also required: Surface finish: – Zinc-plated – Compartment side panel modules for internal compartmentalisation, see page 284 Supply includes: – Assembly parts Note: – For installation of the connection spaces, the width of the cable chamber must be at least 400 mm Compartment divider ◾ For the horizontal separation of compartments ◾ In combination with the side panel modules, creates form separation to Form 3 or 4 Note: – 2 mounting brackets are required to install one compartment divider Also required: Material: – Sheet steel, 1.25 mm – Mounting bracket, see page 286 Surface finish: – Zinc-plated With louvres 284 For enclosure width mm For compartment depth mm Width mm Depth mm Packs of Model No. 400 425 306 445 4 pc(s). 9673.444 400 600 306 588 4 pc(s). 9673.445 400 800 306 788 4 pc(s). 9673.448 600 425 506 445 4 pc(s). 9673.464 600 600 506 588 4 pc(s). 9673.465 600 800 506 788 4 pc(s). 9673.468 800 425 706 445 4 pc(s). 9673.484 800 600 706 588 4 pc(s). 9673.485 800 800 706 788 4 pc(s). 9673.488 Rittal Catalogue 34/Power distribution Compartment configuration Form 1-4 Compartment divider Note: – 2 mounting brackets are required to install one compartment divider for RiLine busbar systems ◾ For the horizontal separation of compartments with integral RiLine distribution busbar system ◾ In combination with the side panel modules, creates form separation to Form 3 or 4 Also required: – Mounting bracket, see page 286 Material: – Sheet steel, 1.25 mm Surface finish: – Zinc-plated With louvres For enclosure width mm For compartment depth mm Width mm Depth mm Packs of Model No. 600 401 506 413 4 pc(s). 9673.454 Compartment divider Note: – 2 mounting brackets are required to install one compartment divider with duct for vertical busbar systems ◾ For the horizontal separation of compartments with vertical busbars ◾ In combination with the side panel modules, creates form separation to Form 3 or 4 Also required: – Gland plate, see page 285 – Mounting bracket, see page 286 Material: – Sheet steel, 1.25 mm Technical details: Available on the Internet Surface finish: – Zinc-plated With louvres For For enclosure width compartment depth mm mm Width mm Depth mm Width of duct mm Depth of duct mm Packs of Model No. 400 600 306 588 212 201 4 pc(s). 9673.436 400 800 306 788 212 201 4 pc(s). 9673.438 600 600 506 588 412 201 4 pc(s). 9673.456 600 800 506 788 412 201 4 pc(s). 9673.458 800 600 706 588 612 201 4 pc(s). 9673.476 800 800 706 788 612 201 4 pc(s). 9673.478 Gland plates for compartment divider with duct To cover the duct. Material: – ABS PMMA For enclosure width mm Width mm Height mm Packs of Model No. 400 250 223.5 4 pc(s). 9673.504 600 450 223.5 4 pc(s). 9673.506 800 650 223.5 4 pc(s). 9673.508 Rittal Catalogue 34/Power distribution 285 Compartment configuration Form 1-4 Air circuit-breaker support rails ◾ For the configuration of air circuit-breakers (ACB) in compartments ◾ The support rail is secured using a mounting bracket For enclosure width mm Length of mm Packs of Model No. 400 351 2 pc(s). 9673.004 600 551 2 pc(s). 9673.006 800 751 2 pc(s). 9673.008 Material: – Sheet steel, 2.5 mm Surface finish: – Zinc-plated Supply includes: – Assembly parts Also required: – Mounting bracket for compartment divider and air circuit-breaker support rail, see page 286 – Mounting kit for air circuit-breaker installation, see page 286 Mounting bracket for compartment divider ◾ The mounting bracket is secured – to the TS frame – to the side panel module or – between a frame section and an auxiliary construction ◾ Pre-machined mounting openings allow slide-in attachment of compartment dividers 1) For compartment depth mm Length mm Packs of Model No. 425 427 8 pc(s). 9673.4051) 600 552 8 pc(s). 9673.406 800 752 8 pc(s). 9673.408 In conjunction with vertical busbar compartment separation Material: – Sheet steel, 1.5 mm Surface finish: – Zinc-plated Supply includes: – Assembly parts Mounting bracket for compartment divider and air circuit-breaker support rail ◾ The mounting bracket is attached to the side panel module ◾ Pre-machined mounting openings allow slide-in attachment of compartment dividers ◾ The air circuit-breaker support rail may be attached to the upper level For compartment depth mm Length mm Packs of Model No. 600 552 2 pc(s). 9673.426 800 752 2 pc(s). 9673.428 Material: – Sheet steel, 2 mm Surface finish: – Zinc-plated Supply includes: – Assembly parts Mounting kit for air circuit-breaker installation For attaching air circuit-breakers (ACB) to air circuitbreaker support rails. Packs of Model No. 1 set(s) 9660.970 Material: – Steel Surface finish: – Zinc-plated Supply includes: – 4 threaded plates (M8/M12) 286 Rittal Catalogue 34/Power distribution Compartment configuration Form 1-4 Partial mounting plates with or without duct ◾ For direct attachment to the compartment side panel modules ◾ Universal internal installation with switchgear and control devices ◾ Additional mounting levels ◾ In combination with compartment dividers and side panel modules, internal separation in accordance with Form 2, 3 or 4 is possible Material: – Sheet steel, 2 mm Surface finish: – Zinc-plated Supply includes: – 2 angle brackets – Version with duct: Additional square cut-out with insulating plates for sealing the cut-out – Assembly parts Also required: – Compartment side panel modules for internal compartmentalisation, see page 283 With duct For enclosure width mm For compartment height mm Width mm Height mm Packs of Model No. 600 150 502 143 1 pc(s). 9673.671 600 200 502 193 1 pc(s). 9673.672 600 300 502 293 1 pc(s). 9673.673 600 400 502 393 1 pc(s). 9673.674 800 200 702 193 1 pc(s). 9673.692 800 300 702 293 1 pc(s). 9673.693 800 400 702 393 1 pc(s). 9673.694 For enclosure width mm For compartment height mm Width mm Height mm Packs of Model No. 400 200 302 193 1 pc(s). 9673.642 400 300 302 293 1 pc(s). 9673.643 400 400 302 393 1 pc(s). 9673.644 400 600 302 593 1 pc(s). 9673.646 400 800 302 793 1 pc(s). 9673.648 600 150 502 143 1 pc(s). 9673.661 600 200 502 193 1 pc(s). 9673.662 600 300 502 293 1 pc(s). 9673.663 600 400 502 393 1 pc(s). 9673.664 600 600 502 593 1 pc(s). 9673.666 600 800 502 793 1 pc(s). 9673.668 600 1000 502 993 1 pc(s). 9673.660 800 150 702 143 1 pc(s). 9673.681 800 200 702 193 1 pc(s). 9673.682 800 300 702 293 1 pc(s). 9673.683 800 400 702 393 1 pc(s). 9673.684 800 600 702 593 1 pc(s). 9673.686 800 800 702 793 1 pc(s). 9673.688 800 1000 702 993 1 pc(s). 9673.680 Without duct Rittal Catalogue 34/Power distribution 287 Compartment configuration Form 1-4 Support frame for DIN rail-mounted devices ◾ Support frame set for accepting DIN rail-mounted devices (e.g. MCBs) ◾ The support rails are attached to the compartment side panel modules with two mounting brackets ◾ The cover is attached to the support frame with knurled screws ◾ In combination with compartment dividers, partial mounting plates and side panel modules, internal compartmentalisation in accordance with Form 2, 3 or 4 is possible Material: – Support frame: Sheet steel 1.5 mm – Cover: Sheet steel 1.5 mm For For No. of enclosure compartpitch units ment height width 17.5 mm mm mm Packs of Model No. 600 150 1 x 24 1 set(s) 9674.761 600 300 2 x 24 1 set(s) 9674.762 800 300 2 x 36 1 set(s) 9674.782 Also required: – Compartment side panel modules for internal compartmentalisation, see page 283 – Partial mounting plates, see page 287 Surface finish: – Support frame: Zinc-plated – Cover: Spray-finished Supply includes: – Support rails – 2 mounting brackets – 1 cover with cut-out – Assembly parts Coupling set mounting kit for busbar enclosure or riser The mounting kit is used as a base support for a vertical Maxi-PLS busbar system/Flat-PLS busbar system. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – 1 mounting plate – 2 punched sections with mounting flanges – Version for Flat-PLS busbar system includes isolating gland plate – Assembly parts For Maxi-PLS busbar system For For enclosure width enclosure depth mm mm Packs of Model No. 200 600 1 set(s) 9674.196 200 800 1 set(s) 9674.198 Packs of Model No. For Flat-PLS busbar systems For For enclosure width enclosure depth mm mm 400 600 1 set(s) 9674.046 400 800 1 set(s) 9674.048 Also required: – End support (for Maxi-PLS busbar system) see page 268 288 Rittal Catalogue 34/Power distribution Ri4Power accessories Busbar system System attachments for RiLine main busbar system System attachment with threaded holes M5 and M6 on a 50 mm pitch pattern for rear assembly of a RiLine main busbar system. For locating into the TS frame. For enclosure width mm Width mm Height mm 400 338.5 362 1 pc(s). 9674.004 600 538.5 362 1 pc(s). 9674.006 800 738.5 362 1 pc(s). 9674.008 Packs Model No. of Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Note: – RiLine busbar systems, see page 211 Distribution busbars Material: – E-Cu Prepared for the connection of T-connector kits. Flat bar Cu 30 x 10 mm For distribution busbar systems behind the compartment For distribution busbar system in the compartment (indoors) For enclosure height mm 1)Also Packs of Length mm Model No. 1800 – 1 pc(s). 1210 9675.218 2000 – 1 pc(s). 1410 9675.210 2200 18001) 1 pc(s). 1610 9675.212 – 20001) 1 pc(s). 1810 9675.220 Packs of Length mm Model No. suitable as a vertical busbar for PE/PEN/N PLS 1600 For distribution busbar systems behind the compartment For distribution busbar system in the compartment (indoors) For enclosure height mm 1)Also 2000 – 1 pc(s). 1350 9675.230 2200 18001) 1 pc(s). 1550 9675.232 – 20001) 1 pc(s). 1750 9675.240 – 22001) 1 pc(s). 1950 9675.242 suitable as a vertical busbar for PE/PEN/N Spacer rolls Material: – E-Cu for Maxi-PLS busbars and flat copper bars For use as a universal spacer. Height: 20 mm Hole diameter: 13 mm For connecting Cu bar – Cu bar Diameter (D) Cross-section Rated max. mm size current A mm2 Maxi-PLS – Cu bar Contact area mm2 Flat-PLS – Cu bar Rated max. current A Contact area mm2 Rated max. current A Packs of Model No. 30 550 1100 360 800 380 850 4 pc(s). 9676.503 40 1100 2200 780 1600 670 1400 4 pc(s). 9676.504 50 1800 3400 1380 2800 990 2000 4 pc(s). 9676.505 Rittal Catalogue 34/Power distribution D 13 20 289 Ri4Power accessories Fuse-switch disconnector section Front trim panels for fuse-switch disconnector section The front trim panels cover above and below the mounting area of the NH fuse-switch disconnector on the front. Protection categories IP 3X/IP 2X of the fuse-switch disconnector section are achieved with integral vent openings. Material: – Sheet steel, 2 mm Colour: – Textured RAL 7035 Model No. Height mm Packs of Top Bottom 336 136 1 set(s) Version IP 3X with louvres 9674.340 Also required: – Assembly kit for fuse-switch disconnector section, see page 290 Supply includes: – 2 front trim panels – Assembly parts Note: – In order to achieve protection category IP 2X, the inner perforated plate must be removed Assembly kit for fuse-switch disconnector section Assembly kit for installing fuse-switch disconnector brands ABB or Jean Müller and attaching the distribution busbar system. For NH fused-switch disconnector brand For enclosure height mm Packs of Model No. Jean Müller SASIL 2000 1 set(s) 9674.350 ABB SlimLine 2000 1 set(s) 9674.356 Material: – Section corner piece: Sheet steel, 2 mm – Trim panel: Sheet steel, 2 mm Surface finish: – Section corner piece: Zinc-plated – Trim panel: Spray-finished Also required: – Divider panel for fuse-switch disconnector section, see page 291 Colour: – Textured RAL 7035 Supply includes: – 2 section corner pieces – 2 trim panels – Assembly parts 290 Rittal Catalogue 34/Power distribution Ri4Power accessories Fuse-switch disconnector section Divider panels For main busbar system in the roof section for fuse-switch disconnector section The divider panel is required for interior configuration of the fused-switch disconnector section, and divides the connection space from the functional space. Depending on the chosen position of the main busbar system, the divider panel is fitted in the prepared fuse-switch disconnector enclosures. The prepared cut-outs are suitable for the connection of fuse-switch disconnectors Jean Müller Sasil and ABB SlimLine. For For enclosure height enclosure depth mm mm Packs of Model No. 2000 600 1 pc(s). 9674.306 2000 800 1 pc(s). 9674.308 Material: – Sheet steel, 1.5 mm Surface finish: – Zinc-plated Supply includes: – Assembly parts Dividing plates for fuse-switch disconnector section Dividing plate to divide the busbar compartment and NH fuse-switch disconnector compartment. Material: – Sheet steel, 1.5 mm Surface finish: – Zinc-plated Supply includes: – Assembly parts Contact hazard protection cover for fuse-switch disconnector section (cable chamber) The contact hazard protection cover shields the main busbar in the cable chamber, enabling the safe connection of cables and lines. Suitable for Maxi-PLS and Flat-PLS busbar systems. Material: – Sheet steel, 1.5 mm For NH fused-switch disconnector brand Installation position Packs Model No. of Jean Müller SASIL Top/bottom 1 pc(s). 9674.346 ABB SlimLine Top/bottom 1 pc(s). 9674.348 Also required: – Assembly kit for fuse-switch disconnector section, see page 290 For main busbar system in the roof section For For enclosure width enclosure depth mm mm Packs of Model No. 1000 600 1 set(s) 9674.362 1200 600 1 set(s) 9674.366 Also required: – Divider panel for fuse-switch disconnector section, see page 291 Surface finish: – Zinc-plated Supply includes: – 2 covers – 1 mounting bracket – Assembly parts Rittal Catalogue 34/Power distribution 291 Ri4Power accessories Fuse-switch disconnector section Cover for distribution busbar (Jean Müller fuse-switch disconnector section) To cover the distribution busbar system of a fuseswitch disconnector section, designed to accommodate Jean Müller devices. The 150 mm high busbar and cable connection space covers shield the busbar compartment from the functional space so that it is safe from finger contact, with a protection category of IP 20. Suitable for use in enclosures with height 2000 mm and 2200 mm. Packs of Model No. 1 set(s) 9674.380 Also required: – Punched rail for distribution busbar cover, see page 292 Material: – PVC, black Supply includes: – 12 busbar covers – 12 cable connection space covers Punched rail for distribution busbar cover (Jean Müller fuse-switch disconnector section) Required for mounting the distribution busbar cover. Suitable for use in enclosures with height 2000 mm and 2200 mm. Packs of Model No. 1 set(s) 9674.381 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – 2 punched rails Note: – 1 pack of punched rails is required for 1 fuseswitch disconnector section Cover for distribution busbar (for ABB/Siemens fuse-switch disconnector section) To cover the distribution busbar system of a fuseswitch disconnector section, designed to accommodate ABB (SlimLine) or Siemens (3NJ62) devices. The 200 mm high busbar compartment covers shield the busbar compartment from the functional space so that it is safe from finger contact, with a protection category of IP 20. Note: – The cover may be ordered from ABB under order reference NHP 407062R000X – For enclosure height 2000 mm, a height of 1500 mm should be covered, and for enclosure height 2200 mm, a height of 1700 mm should be covered Material: – PVC, black 292 Rittal Catalogue 34/Power distribution Ri4Power accessories Fuse-switch disconnector section Busbar support for fuse-switch disconnector section Busbar support for the distribution busbar system of the switch-disconnector-fuse section. Material: – Duroplastic polyester Supply includes: – Mounting bracket and screws For busbars mm Number of poles Packs of Model No. 50 x 10 3/4-pole 1 pc(s). 9674.415 60 x 10 3/4-pole 1 pc(s). 9674.416 80 x 10 3/4-pole 1 pc(s). 9674.418 100 x 10 3/4-pole 1 pc(s). 9674.410 Also required: – Assembly kit for fuse-switch disconnector section, see page 290 – End support for fuse-switch disconnector section, see page 293 – Distribution busbar for fuse-switch disconnector section, see page 293 End support for fuse-switch disconnector section End support for the distribution busbar system of the fuse-switch disconnector section, for vertical support of the distribution busbar system with infeed from above. Material: – Duroplastic polyester Supply includes: – Mounting bracket and screws For busbars mm Number of poles Packs of Model No. 50 x 10 3/4-pole 1 pc(s). 9674.435 60 x 10 3/4-pole 1 pc(s). 9674.436 80 x 10 3/4-pole 1 pc(s). 9674.438 100 x 10 3/4-pole 1 pc(s). 9674.430 Also required: – Assembly kit for fuse-switch disconnector section, see page 290 – Distribution busbar for fuse-switch disconnector section, see page 293 Distribution busbars for fuse-switch disconnector section Distribution busbar to fit the main busbar systems Maxi-PLS and Flat-PLS for installation in the fuseswitch disconnector sections. Material: – E-Cu Also required: – Busbar support for fuse-switch disconnector section, see page 293 – End support for fuse-switch disconnector section, see page 293 – Terminal block for distribution busbar (fuse-switch disconnector section), see page 294 Size mm Length mm For enclosure height mm Packs of Model No. 50 x 10 1632.5 2000 1 pc(s). 9674.405 60 x 10 1632.5 2000 1 pc(s). 9674.406 80 x 10 1632.5 2000 1 pc(s). 9674.408 100 x 10 1632.5 2000 1 pc(s). 9674.400 Rittal Catalogue 34/Power distribution 293 Ri4Power accessories Fuse-switch disconnector section Terminal block for distribution busbar (fuse-switch disconnector section) For connecting the connection brackets to the distribution busbar system of the fuse-switch disconnector section, no drilling required. Material: – E-Cu Supply includes: – Assembly parts For busbar width mm Packs of Model No. 50/60 1 pc(s). 9674.485 80/100 1 pc(s). 9674.488 Also required: – Connection bracket for fuse-switch disconnector section, see page 274 Technical details: Available on the Internet 294 Rittal Catalogue 34/Power distribution Ri4Power accessories Software/documentation Rittal Power Engineering Packs of Model No. Planning software for RiLine busbar systems and Ri4Power low-voltage switchgear with design certificate The multi-lingual software package includes the following functions: ◾ Project handling, from the initial enquiry through to ordering ◾ Configuration of RiLine busbar systems in the TS enclosure, compact enclosures AE, CM, KS and free-standing enclosure SE ◾ Configuration of low-voltage switchgear with Ri4Power systems Form 1-4 and ISV ◾ Complete, automatic function for the generation of bills of materials and a calculation program for quote preparation ◾ Input and evaluation of assembly times to calculate man hours ◾ Access to the entire range of Rittal products ◾ Output of automatically generated plant documentation with rated current and heat loss calculation 1 pc(s). 3020.500 ◾ Generation of special fields configured by the customer with graphical processing in the CAD view ◾ Import/export interfaces for product and CAD data ◾ Export function for order lists and bills of materials in Excel format ◾ Interface to EPLAN Electric P8, for the export of CAD data and bills of materials ◾ The extra benefit for engineering and planning offices: Output of detailed tender texts based on plants that have been project-planned in Power Engineering in MS Word format ◾ Output of project-specific assembly plans together with field and plant definitions ◾ Integral configurator for the generation of drawings and bills of materials to create connector kits for connecting open air circuit-breakers (ACB) ◾ Simple generation of the design certificate to IEC 61 439 Supply includes: – DVD-ROM Languages: German/English/French/Dutch/ Danish/Swedish/Czech/Italian/Spanish/Polish/ Russian/Chinese Assembly instructions for Ri4Power low-voltage switchgear for Form 1-4, with Flat-PLS, Maxi-PLS and RiLine These assembly instructions explain the configuration of type-tested Ri4Power field types and possible busbar systems, divided into 3 sections. The first section explains the assembly sequence for the individual stages of the possible field types in diagrammatic form. The second section provides detailed assembly instructions using diagrams and data tables. The final section explains the installation of optional accessories and general work operations. Rittal Catalogue 34/Power distribution This documentation is available for downloading at the Rittal website www.rittal.com under “Download brochures”. Alternatively, it may be ordered as a CD. Packs of Model No. 1 pc(s). 9676.000 295 296 Rittal Catalogue 34/Power distribution Ri4Power ISV distribution enclosures Installation distribution enclosure ◾ Based on baying system TS 8, see page 75 ◾ Based on system enclosure SE 8, see page 81 ◾ Mounting kits, see page 298 Wall-mounted distribution ◾ Based on compact enclosure AE, see page 46 ◾ Mounting kits, see page 298 Extension modules ◾ Easy mounting on support frame or support plate ◾ Individual combination and configuration ◾ Pitch pattern 150 x 250 mm ◾ Extension modules, see page 299 Power distribution components ◾ Bus-mounting fuse bases, see page 236 ◾ NH fuse-switch disconnectors, see page 238 ◾ NH slimline fuse-switch disconnectors, see page 246 Rittal Catalogue 34/Power distribution 297 ISV distribution enclosures Mounting kits Mounting kits Supply includes: – Mounting aid support – Contact hazard protection – Support for contact hazard protection – Basic supports for frame holders – Assembly parts for TS, SE For mounting installation modules in TS/SE enclosures. Note: – TS 8 baying systems, see from page 68 – System enclosures SE 8, see from page 81 For enclosure Packs of Design: Sheet steel, spray finished Model No. Page 8604.500 8606.500 9666.955 9666.915 9666.965 9666.925 Design: Stainless steel 1.4301 Model No. – 8452.600 – – – – 8684.500 8685.500 8686.500 5830.500 8457.600 5851.500 Enclosure width mm 600 850 1100 600 Enclosure height mm 2000 2000 2000 1800 Enclosure depth mm 400 600 400 600 400 600 400 500 600 Width unit (WU) 2 3 4 2 Height unit (U) 12 12 12 11 9666.900 9666.910 9666.920 9666.930 Model No. 1 pc(s). Also required Mounting angle 11 U 2 pc(s). – – – 9666.711 305 Mounting angle 12 U 2 pc(s). 9666.712 9666.712 9666.712 – 305 Depth stay for enclosure depth 400/500/600 mm 2 pc(s). – – 9666.730 – 305 Cross rail 2 WU 2 pc(s). 9666.722 9666.722 9666.722 9666.722 305 Cross rail 3 WU 2 pc(s). – 9666.723 9666.723 – 305 Cross rail 4 WU 2 pc(s). – – 9666.724 – 305 Mounting angle 2 U 2 pc(s). 9666.702 9666.702 9666.702 9666.702 305 Mounting angle 3 U 2 pc(s). 9666.703 9666.703 9666.703 9666.703 305 Mounting angle 4 U 2 pc(s). 9666.704 9666.704 9666.704 9666.704 305 Mounting angle 5 U 2 pc(s). – – – 9666.705 305 Mounting angle 6 U 2 pc(s). – – – 9666.706 305 Mounting angle 7 U 2 pc(s). – – – 9666.707 305 Depth stay for enclosure depth 400/500/600 mm 2 pc(s). 9666.730 9666.730 – 9666.730 305 Equipment support connectors 4 pc(s). 9666.740 9666.740 9666.740 9666.740 305 Accessories 1 WU ≙ 250 mm, 1 WU ≙ 150 mm Mounting kits Supply includes: – Support plates – Spacer brackets – Contact hazard protection – Angle bracket for contact hazard protection – Horizontal mounting angle – Assembly parts for AE For mounting installation modules in AE enclosures. Note: – Compact enclosures AE, see from page 47 For enclosure Packs of Page Design: Sheet steel, spray finished Model No. 1038.500 1057.500 1076.500 1090.500 1260.500 1213.500 Design: Stainless steel 1.4301 Model No. 1008.600 – 1012.600 – – 1019.600 Design: Stainless steel 1.4404 Model No. – – – – – 1019.500 Enclosure width mm 380 500 600 600 600 1000 Enclosure height mm 600 700 760 1000 1200 1200 Enclosure depth mm 210 250 210 250 300 300 Width unit (WU) 1 1 2 2 2 3 Height unit (U) 3 4 4 6 7 7 Model No. 1 pc(s). 9666.800 9666.810 9666.820 9666.830 9666.840 9666.850 Accessories Mounting angle 3 U 2 pc(s). 9666.753 Mounting angle 4 U 2 pc(s). – – Mounting angle 6 U 2 pc(s). – – Mounting angle 7 U 2 pc(s). – – – – – – – – – 305 – 9666.756 – – 305 – – 9666.754 9666.754 9666.757 9666.757 305 305 1 WU ≙ 250 mm, 1 WU ≙ 150 mm 298 Rittal Catalogue 34/Power distribution ISV distribution enclosures Installation modules Contact hazard protection modules Material: – Cover: Polystyrene (PS) Colour: – RAL 7035 ◾ For covering free installation areas ◾ Cover is prepared for a lead seal Mounting plate modules 1 ◾ With mounting plate made from 2 mm zincplated sheet steel ◾ Cover is prepared for a lead seal ◾ Possible installation depth 105 – 140 mm Contact hazard Size Width unit WU Height unit mm U Packs of mm Mounting plate protection Interior installation Model No. Dimensions of mounting plate mm Model No. 1 250 1 150 1 pc(s). 9666.000 188 x 116 9666.080 1 250 2 300 1 pc(s). 9666.010 188 x 266 9666.090 1 250 3 450 1 pc(s). 9666.020 188 x 416 9666.100 1 250 4 600 1 pc(s). 9666.030 188 x 566 9666.110 2 500 1 150 1 pc(s). 9666.040 438 x 116 9666.120 2 500 2 300 1 pc(s). 9666.050 438 x 266 9666.130 2 500 3 450 1 pc(s). 9666.060 438 x 416 9666.140 2 500 4 600 1 pc(s). 9666.070 438 x 566 9666.150 3 750 2 300 1 pc(s). 9666.053 688 x 266 9666.133 3 750 3 450 1 pc(s). 9666.063 688 x 416 9666.143 3 750 4 600 1 pc(s). 9666.073 – – Empty module 2 1 WU ≙ 250 mm 1 U ≙ 150 mm Support rail modules ◾ ◾ ◾ ◾ Material: – Cover: Polystyrene (PS) For installing terminal blocks, switchgear, etc. Support rails 35/15 mm Adjustable on a 25 mm pitch pattern Cover is prepared for a lead seal Colour: – RAL 7035 Accessories: DIN rail mounted device modules – Cover strips for DIN rail mounted device modules, see page 304 1 ◾ To accommodate DIN rail mounted devices ◾ Support rails 35/15 mm ◾ Cover is prepared for a lead seal Size Width unit Height unit Packs of Support rails Number of support rails DIN rail mounted devices Model No. Mechanical interior installation1) Model No. WU mm U mm 1 250 1 150 1 pc(s). 1 9666.160 12 divider units (1 x 12 x 18 mm) 9666.240 1 250 2 300 1 pc(s). 2 9666.170 24 divider units (2 x 12 x 18 mm) 9666.250 1 250 3 450 1 pc(s). 3 9666.180 36 divider units (3 x 12 x 18 mm) 9666.260 9666.270 1 250 4 600 1 pc(s). 4 9666.190 48 divider units (4 x 12 x 18 mm) 2 500 1 150 1 pc(s). 1 9666.200 24 divider units (2 x 12 x 18 mm) 9666.280 9666.290 2 500 2 300 1 pc(s). 2 9666.210 48 divider units (4 x 12 x 18 mm) 2 500 3 450 1 pc(s). 3 9666.220 72 divider units (6 x 12 x 18 mm) 9666.300 2 500 4 600 1 pc(s). 4 9666.230 – – 3 750 2 300 1 pc(s). 2 9666.213 72 divider units (6 x 12 x 18 mm) 9666.293 9666.223 108 divider units (9 x 12 x 18 mm) 9666.303 3 750 3 450 1 pc(s). 3 2 1 WU ≙ 250 mm 1 U ≙ 150 mm 1) No. of fields x divider units x width Rittal Catalogue 34/Power distribution 299 ISV distribution enclosures Installation modules Connection terminal blocks ◾ For connecting copper and aluminium conductors ◾ Single-wire or multi-wire conductors with crimped wire end ferrule or laminated copper bar 1 Material: – Duroplastic Colour: – RAL 7035 Connection of round conductors mm2 Clamping area for laminated copper bars, W x H mm Packs of Model No. 250 A, 5-pole 1 x 16 – 150 or 2 x 16 – 70 17 x 21 1 pc(s). 9666.340 400 A, 5-pole 1 x 50 – 240 or 2 x 25 – 120 25 x 21 1 pc(s). 9666.350 Packs of Model No. Design Page Also required Size Description 2 Width unit Mounting kit for connection terminal block Contact hazard protection modules Height unit WU mm U mm 1 250 3 450 1 pc(s). 9666.310 1 250 3 450 1 pc(s). 9666.020 299 Accessories Laminated copper bars 255 1 WU ≙ 250 mm 1 U ≙ 150 mm NH fuse-switch disconnector modules Material: – Cover: Polystyrene (PS) Colour: – RAL 7035 ◾ Suitable for the accommodation of NH fuseswitch disconnectors for mounting plate assembly ◾ Cover is prepared for a lead seal Note: – Blanking cover 9666.665 should be used to seal unneeded cut-outs for NH fuse-switch disconnectors size 00 To fit NH disconnector Size Model No. 2 pc(s). size 00 4 pc(s). size 00 9344.000/.010/ .020/.030/.040/.050 Size Width unit Height unit Packs of Model No. WU mm U mm 1 250 2 300 1 pc(s). 9666.380 2 500 2 300 1 pc(s). 9666.390 9666.400 Page 1 pc(s). size 1 9344.100/.110/ 130/.150 1 250 3 450 1 pc(s). 1 pc(s). size 2 9344.200/.210/ 230/.250 1 250 3 450 1 pc(s). 9666.410 1 pc(s). 9666.0601) 299 1 pc(s). 9666.4201) 300 1 pc(s). size 3 or 2 pc(s). size 2 9344.300/.310/ 330/.350 2 500 3 450 1 WU ≙ 250 mm 1 U ≙ 150 mm 1) Module unit consisting of disconnector cross-member 9666.420 and contact hazard protection module 9666.060 Disconnector cross-member for NH fuse-switch disconnector, size 2/3 ◾ Suitable for the accommodation of NH fuseswitch disconnectors for mounting plate assembly To fit NH disconnector Size 1 pc(s). size 3 or 2 pc(s). size 2 Model No. 9344.300/.310/ 330/.350 Size Width unit Height unit WU mm U mm 2 500 3 450 Packs of Model No. 1 pc(s). 9666.420 1 pc(s). 9666.060 Page Also required Contact hazard protection modules 300 299 Rittal Catalogue 34/Power distribution ISV distribution enclosures Installation modules NH slimline fuse-switchdisconnector modules Note: – Busbars are not included with the supply – In order to ensure problem-free cable connection, a contact hazard protection module or an N/PE busbar module must be installed above or below the NH slimline fuse-switch disconnector modules For NH slimline fuse-switch disconnectors, sizes 00 to 3 (100/185 mm bar centre distance). Material: – Cover: Polystyrene (PS) Colour: – RAL 7035 Design To fit NH slimline fuseswitch disconnectors Model No. Size 185 mm module, 3-pole, max. 12 x size 00/ 6 x size 1, 2, 3 450 1 pc(s). 9666.570 3 450 1 pc(s). 9666.580 750 3 450 1 pc(s). 9666.583 2 500 5 750 1 pc(s). 9666.550 3 750 5 750 1 pc(s). 9666.560 mm U mm 1 250 3 2 500 3 9346.020 9346.030 9346.065 100 mm module, 3-pole, max. 10 x size 00 185 mm module, 3-pole, max. 8 x size 00/ 4 x size 1, 2, 3 Model No. Height unit WU 100 mm module, 3-pole, max. 3 x size 00 100 mm module, 3-pole, max. 6 x size 00 Packs of Width unit 9346.040 9346.050 9346.110/.115 9346.210/.215 9346.310/.315 Page Also required Contact hazard protection modules 299 Busbar modules N/PE 302 1 WU ≙ 250 mm 1 U ≙ 150 mm Air circuit-breaker modules Note: – Attachment of the circuit-breakers and the corresponding cut-out dimensions for the cover are shown in the enclosed assembly instructions – Air circuit-breakers are not included with the supply ◾ Suitable for accommodating standard air circuitbreakers from ABB, Eaton, Schneider Electric and Siemens ◾ Cover is prepared for a lead seal Material: – Cover: Polystyrene (PS) Colour: – RAL 7035 Size For air circuit-breakers Width unit Height unit Packs of Model No. WU mm U mm up to 250 A 1 250 2 300 1 pc(s). 9666.430 up to 630 A 2 500 3 450 1 pc(s). 9666.440 1 WU ≙ 250 mm 1 U ≙ 150 mm Rittal Catalogue 34/Power distribution 301 ISV distribution enclosures Installation modules Meter mounting board module Note: – The meter mounting board module does not comply with meter mounting board standard DIN 43 870/VDE 0603 and does not meet the conditions for total insulation. Use in unmetered areas only by arrangement with the local electricity supply company. – 1 contact hazard protection module/DIN rail mounted device module with 1 WU and at least 1 U is required both above and below the module ◾ Open module for internal measurements ◾ Clearance depth available for meter installation 170 mm Material: – Meter mounting board: Polystyrene (PS) Colour: – RAL 7035 Size Width unit Height unit WU mm U mm 1 250 3 450 Packs of Model No. 1 pc(s). 9666.640 Page Also required Contact hazard protection modules 299 Support rail modules 299 DIN rail mounted device modules 299 1 WU ≙ 250 mm 1 U ≙ 150 mm Busbar modules N/PE Note: – Copper or CUPONAL busbars should be ordered separately, see page 252 – Not suitable for use in mounting kit AE ◾ For attaching the busbars for N and PE ◾ Cover is prepared for a lead seal Material: – Cover: Polystyrene (PS) Colour: – RAL 7035 Size For busbars mm 12 x 5 to 30 x 10 mm Width unit Packs of Model No. 300 1 pc(s). 9666.590 300 1 pc(s). 9666.600 300 1 pc(s). 9666.603 Height unit WU mm U mm 1 250 2 2 500 2 3 750 2 1 WU ≙ 250 mm 1 U ≙ 150 mm 302 Rittal Catalogue 34/Power distribution ISV distribution enclosures Installation modules Busbar modules Note: – Busbars are not included with the supply For assembling bus-mounting fuse bases E18, E27, E33 and D-Switch as well as NH fuse-switch disconnectors sizes 000 and 00 (3-pole, 60 mm bar centre distance). Material: – Cover: Polystyrene (PS) Colour: – RAL 7035 Size Width unit WU 1 mm 250 To fit Height unit U 2 mm Fusible elements for busbar systems Model No. 300 2 500 2 300 3 750 2 300 3418.010 3427.010 3433.010 9340.950 Packs of Model No. 9343.0001) 9343.0201) 9343.0401) 3431.020 3431.030 3431.035 1 pc(s). 9666.520 3431.020 3431.030 3431.035 1 pc(s). 9666.530 3431.020 3431.030 3431.035 1 pc(s). 9666.533 10 pc(s). 9666.660 NH disconnectors Model No. Page Accessories Blanking cover 304 1 WU ≙ 250 mm 1 U ≙ 150 mm 1) A depth extension frame 9666.680 should additionally be used to ensure unrestricted connection. NH fuse-switch disconnectors size 00 cannot be combined with other equipment. Rittal Catalogue 34/Power distribution 303 ISV distribution enclosures Accessories Cover strips Packs of Model No. for DIN rail mounted device modules For blanking spare component cut-outs in DIN rail mounted device modules, max. 12 divider units (12 x 18 mm), divisible every 9 mm. 5 pc(s). 9666.650 Blanking cover Packs of Model No. ◾ For blanking unused cut-outs ◾ To fit bus-mounting fuse base, D-Switch and NH fuse-switch disconnector size 000 (3-pole, 60 mm busbar systems) in busbar modules (9666.520/.530/.533) ◾ Width: 16 – 34 mm variable 10 pc(s). 9666.660 Blanking cover Packs of Model No. for disconnectors, size 00 ◾ For blanking unused cut-outs with NH fuseswitch disconnectors size 00 in NH fuse-switch disconnector modules (9666.380/.390) ◾ Width: 117 mm 1 pc(s). 9666.665 Wiring brackets Packs of Model No. For tool-free attachment to support rails TS 35/15, for cable routing on the rear of support rail modules. 10 pc(s). 9666.670 Material: – ABS Colour: – RAL 7035 Material: – Polypropylene (PP) Colour: – RAL 7035 Material: – PVC Colour: – RAL 7035 Material: – Polyamide (PA 6.6) Depth extension frame For extending the depth of the contact hazard protection cover. Allows unrestricted connection of NH fuse-switch disconnectors, size 00 (3-pole, 60 mm busbar systems). Material: – Polystyrene (PS) Colour: – RAL 7035 304 Size Width unit Height unit WU mm U mm 1 250 2 300 Packs of Model No. 1 pc(s). 9666.680 1 WU ≙ 250 mm 1 U ≙ 150 mm Note: – NH fuse-switch disconnectors size 00 with covers and depth extension frame cannot be used in conjunction with other equipment Rittal Catalogue 34/Power distribution ISV distribution enclosures Accessories Cross rails for TS, SE For horizontal sub-division of the support frame in the TS/SE enclosure. Material: – Sheet steel Width unit WU mm Packs of Model No. 2 500 2 pc(s). 9666.722 3 750 2 pc(s). 9666.723 4 1000 2 pc(s). 9666.724 1 WU ≙ 250 mm Surface finish: – Zinc-plated Mounting angles Height unit for TS, SE For vertical sub-division of the support frame in the TS/SE enclosure. U mm Packs of Model No. 2 300 2 pc(s). 9666.702 3 450 2 pc(s). 9666.703 Material: – Sheet steel 4 600 2 pc(s). 9666.704 5 750 2 pc(s). 9666.705 Surface finish: – Zinc-plated 6 900 2 pc(s). 9666.706 7 1050 2 pc(s). 9666.707 11 1650 2 pc(s). 9666.711 12 1800 2 pc(s). 9666.712 1 U ≙ 150 mm Accessories: – Equipment support connector, see page 305 Mounting angles Height unit for AE For vertical sub-division of the support frame in the AE enclosure. U mm Packs of Model No. 3 450 2 pc(s). 9666.753 4 600 2 pc(s). 9666.754 Material: – Sheet steel 6 900 2 pc(s). 9666.756 7 1050 2 pc(s). 9666.757 Surface finish: – Zinc-plated 1 U ≙ 150 mm Depth stay Packs of Model No. ◾ For enclosure depth 400/500/600 mm ◾ For attaching the support frame in the TS/SE enclosure 2 pc(s). 9666.730 Equipment support connector Packs of Model No. ◾ For connecting 2 mounting angles for TS/SE ◾ Increases the stability of the frame structure 4 pc(s). 9666.740 Material: – Sheet steel Surface finish: – Zinc-plated Material: – T-section: Aluminium Rittal Catalogue 34/Power distribution 305 306 Rittal Catalogue 34/Climate control Climate control Cooling with ambient air Fan-and-filter units......................................................................................316 Roof-mounted fans.....................................................................................324 Rack-mounted fans/tangential fans ............................................................326 Air/air heat exchangers ...............................................................................329 Cooling units Thermoelectric coolers ...............................................................................334 Wall-mounted cooling units.........................................................................335 Roof-mounted cooling units........................................................................346 Modular climate control concept.................................................................350 Cooling with water Air/water heat exchangers ..........................................................................354 Liquid Cooling Package ..............................................................................360 Chillers .......................................................................................................361 Enclosure heaters Enclosure heaters .......................................................................................366 Climate control accessories Filter technology .........................................................................................369 Air routing...................................................................................................374 Water distribution .......................................................................................377 Control/regulation .......................................................................................379 Mounting ....................................................................................................383 Project planning/monitoring ........................................................................385 TÜV-tested performance to DIN EN 14511:2012-01 Rittal is the only supplier worldwide whose complete range of enclosure cooling units is tested to the latest (DIN) EN standard (except cooling units with Atex approval for zone 22 and NEMA 4X). Rittal Catalogue 34/Climate control 307 nextlevel for industry With our Therm software and the innovative Therm App, calculating the climate control requirements becomes child’s play. Meanwhile, the Rittal range of climate control products has the right solution to suit every application. Rittal – The System. ◾ Rittal – Therm software ◾ Rittal – Type-tested climate control systems 308 Rittal Catalogue 34/Climate control Rittal Catalogue 34/Climate control 309 Climate control from the smallest to the largest ◾ Cooling with ambient air ◾ Cooling units ◾ Cooling with water ◾ Enclosure heaters 310 Rittal Catalogue 34/Climate control ◾ Up to 10% more output – with TÜV-tested cooling units ◾ Energy savings of up to 45% – with the “Blue e” generation of cooling units Rittal Catalogue 34/Climate control 311 Your benefits As a system supplier, Rittal is the world’s leading provider of exceptionally effective yet energy-efficient and environmentally-friendly climate control solutions, precisely tailored to the customer’s individual requirements. Faster – Simple project planning with the Therm App Better – Efficient, energy-saving climate control technology, TÜV-tested Everywhere – Global spare parts service 312 Rittal Catalogue 34/Climate control Rittal Catalogue 34/Climate control 313 314 Rittal Catalogue 34/Climate control Cooling with ambient air TopTherm fan-and-filter units TopTherm fan-and-filter units........................................ 20 – 55 m3/h.........316 TopTherm fan-and-filter units.................................... 105 – 180 m3/h.........317 TopTherm fan-and-filter units.................................... 230 – 550 m3/h.........317 TopTherm fan-and-filter units..............................................700 m3/h.........318 TopTherm fan-and-filter units, with EC technology...... 55 – 230 m3/h.........319 TopTherm fan-and-filter units, with EC technology.... 550 – 900 m3/h.........320 TopTherm fan-and-filter units, EMC ............................ 20 – 180 m3/h.........321 TopTherm fan-and-filter units, EMC .......................... 230 – 900 m3/h.........322 TopTherm fan-and-filter units, air throughput and protection category ........323 Roof-mounted fans TopTherm roof-mounted fans ................................... 400 – 800 m3/h.........324 Roof-mounted fans, roof ventilation ....................................360 m3/h.........325 Rack-mounted climate control Rack-mounted fans for 482.6 mm (19˝)..................... 320 – 480 m3/h.........326 Vario rack-mounted fans for 482.6 mm (19˝) ............. 320 – 480 m3/h.........327 Tangential fans for 482.6 mm (19˝)......................................320 m3/h.........328 Air/air heat exchangers TopTherm, wall-mounted with controller .....................17.5 – 90 W/K.........329 Roof-mounted ...................................................................... 66 W/K.........330 Rittal Catalogue 34/Climate control 315 TopTherm fan-and-filter units Air throughputs incl. outlet filter and protection categories Page 323 Climate control accessories Page 369 Therm software Page 385 Colour: – RAL 7035 Approvals: Available on the Internet T2 T1 Performance diagrams: Available on the Internet Technical details: Available on the Internet H Supply includes: – Complete unit ready to install, including filter mat Note: – For energy-efficient operation of the fan-and-filter units, we recommend using the enclosure internal thermostat, the speed control or the digital enclosure internal temperature display and thermostat B Air throughput 20 – 55 m³/h Model No. Packs of Rated operating voltage V, ~, Hz Air throughput, unimpeded air flow m³/h Rated current A 3237.100 3237.110 3237.124 3238.100 3238.110 3238.124 230, 1~, 50/60 115, 1~, 50/60 24 (DC) 230, 1~, 50/60 115, 1~, 50/60 24 (DC) 20 / 25 20 / 25 20 55 / 66 55 / 66 55 0.065 / 0.052 0.12 / 0.1 0.125 0.12 / 0.11 0.24 / 0.22 0.24 Pre-fuse A 2 2 2 2 2 2 Motor circuit-breaker – – – – – – Power consumption W 11 / 9 11 / 9 3 19 / 18 19 / 18 5.5 Width (B) mm 116.5 116.5 116.5 148.5 148.5 148.5 Height (H) mm 116.5 116.5 116.5 148.5 148.5 148.5 Depth (T1) mm 16 16 16 16 16 16 Max. installation depth (T2) mm 43 43 43 58.5 58.5 58.5 92 x 92 92 x 92 92 x 92 Required mounting cut-out (BxH) mm Axial, self-start- Axial, self-starting shaded pole ing shaded pole Axial, DC motor motor motor Fan 124 x 124 124 x 124 124 x 124 Diagonal, selfstarting shaded pole motor Diagonal, selfstarting shaded pole motor Diagonal, DC motor Page Operating temperature range -15°C...+55°C -15°C...+55°C -15°C...+55°C -15°C...+55°C -15°C...+55°C -15°C...+55°C Storage temperature range -30°C...+70°C -30°C...+70°C -30°C...+70°C -30°C...+70°C -30°C...+70°C -30°C...+70°C 38 / 43 38 / 43 38 46 / 49 46 / 49 46 3237.200 3237.200 3237.200 3238.200 3238.200 3238.200 372 see page see page see page see page see page see page 371 Noise level dB(A) Accessories Outlet filter 1 pc(s). Spare filter mats Fine filter mats 5 pc(s). – – – 3238.055 3238.055 3238.055 371 Hose-proof hood 1 pc(s). 3237.080 3237.080 3237.080 3238.080 3238.080 3238.080 372 Blanking cover 2 pc(s). 3237.020 3237.020 3237.020 3238.020 3238.020 3238.020 372 Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 379 Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 379 Hygrostat 1 pc(s). 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 380 Speed control 1 pc(s). 3120.200 3120.200 – 3120.200 3120.200 – 381 316 Rittal Catalogue 34/Climate control TopTherm fan-and-filter units Air throughput 105 – 180 m³/h Model No. Packs of Rated operating voltage V, ~, Hz 3239.100 3239.110 3239.124 3240.100 3240.110 3240.124 230, 1~, 50/60 115, 1~, 50/60 24 (DC) 230, 1~, 50/60 115, 1~, 50/60 24 (DC) Air throughput, unimpeded air flow m³/h 105 / 120 105 / 120 105 180 / 160 180 / 160 180 Rated current A 0.12 / 0.11 0.24 / 0.22 0.23 0.21 / 0.19 0.42 / 0.38 0.43 Pre-fuse A 2 2 2 2 4 2 Motor circuit-breaker – – – – – – 19 / 18 19 / 18 5.5 35 / 34 35 / 34 10 Width (B) mm 204 204 204 255 255 255 Height (H) mm 204 204 204 255 255 255 Depth (T1) mm 24 24 24 25 25 25 Max. installation depth (T2) mm 90 90 90 107 107 107 Power consumption W Required mounting cut-out (BxH) mm Page 177 x 177 177 x 177 177 x 177 224 x 224 224 x 224 224 x 224 Fan Diagonal, selfstarting shaded pole motor Diagonal, selfstarting shaded pole motor Diagonal, DC motor Diagonal, selfstarting shaded pole motor Diagonal, selfstarting shaded pole motor Diagonal, DC motor Operating temperature range -15°C...+55°C -15°C...+55°C -15°C...+55°C -30°C...+55°C -30°C...+55°C -30°C...+55°C Storage temperature range -30°C...+70°C -30°C...+70°C -30°C...+70°C -30°C...+70°C -30°C...+70°C -30°C...+70°C 46 / 49 46 / 49 46 51 / 46 51 / 46 51 3239.200 3239.200 3239.200 3240.200 3240.200 3240.200 372 see page see page see page see page see page see page 371 Noise level dB(A) Accessories Outlet filter 1 pc(s). Spare filter mats Fine filter mats 5 pc(s). 3181.100 3181.100 3181.100 3182.100 3182.100 3182.100 371 Hose-proof hood 1 pc(s). 3239.080 3239.080 3239.080 3240.080 3240.080 3240.080 372 Blanking cover 2 pc(s). 3239.020 3239.020 3239.020 3240.020 3240.020 3240.020 372 Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 379 Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 379 Hygrostat 1 pc(s). 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 380 Speed control 1 pc(s). 3120.200 3120.200 – 3120.200 3120.200 – 381 Air throughput 230 – 550 m³/h Model No. Packs of Rated operating voltage V, ~, Hz 3241.100 3241.110 3241.124 3243.100 3243.110 230, 1~, 50/60 115, 1~, 50/60 24 (DC) 230, 1~, 50/60 115, 1~, 50/60 Air throughput, unimpeded air flow m³/h 230 / 250 230 / 250 230 550 / 600 550 / 600 Rated current A 0.26 / 0.24 0.52 / 0.48 0.8 0.37 / 0.39 0.78 / 0.8 Pre-fuse A 4 4 2 4 6 Motor circuit-breaker – – – – – 40 / 42 40 / 42 19 70 / 87 75 / 90 Width (B) mm 255 255 255 323 323 Height (H) mm 255 255 255 323 323 Depth (T1) mm 25 25 25 25 25 Max. installation depth (T2) mm 107 107 107 118.5 118.5 224 x 224 224 x 224 224 x 224 292 x 292 292 x 292 Power consumption W Required mounting cut-out (BxH) mm Page Diagonal, self-start- Diagonal, self-startDiagonal, 1~ capaci- Diagonal, 1~ capaciing shaded pole ing shaded pole Diagonal, DC motor tor motor tor motor motor motor Fan Operating temperature range -30°C...+55°C -30°C...+55°C -30°C...+55°C -30°C...+55°C -30°C...+55°C Storage temperature range -30°C...+70°C -30°C...+70°C -30°C...+70°C -30°C...+70°C -30°C...+70°C 54 / 56 54 / 56 54 59 / 61 59 / 61 3240.200 3240.200 3240.200 3243.200 3243.200 372 see page see page see page see page see page 371 371 Noise level dB(A) Accessories Outlet filter 1 pc(s). Spare filter mats Fine filter mats 5 pc(s). 3182.100 3182.100 3182.100 3183.100 3183.100 Hose-proof hood 1 pc(s). 3240.080 3240.080 3240.080 3243.080 3243.080 372 Blanking cover 2 pc(s). 3240.020 3240.020 3240.020 3243.020 3243.020 372 Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 3110.000 3110.000 3110.000 379 Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 3114.200 3114.200 3114.200 379 Hygrostat 1 pc(s). 3118.000 3118.000 3118.000 3118.000 3118.000 380 Speed control 1 pc(s). 3120.200 3120.200 – 3120.200 3120.200 381 Rittal Catalogue 34/Climate control 317 TopTherm fan-and-filter units Air throughput 700 m³/h Model No. Packs of 3244.110 3244.140 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50 460, 3~, 60 Air throughput, unimpeded air flow m³/h 700 / 770 700 / 770 700 / 770 Rated current A 0.43 / 0.6 0.9 / 1.25 0.17 / 0.21 Pre-fuse A 4 6 – Motor circuit-breaker A – – 6.3...10 Power consumption W Rated operating voltage V, ~, Hz 3244.100 95 / 135 100 / 145 93 / 140 Width (B) mm 323 323 323 Height (H) mm 323 323 323 Depth (T1) mm 25 25 25 130.5 130.5 130.5 Max. installation depth (T2) mm Required mounting cut-out (BxH) mm Page 292 x 292 292 x 292 292 x 292 Diagonal, 1~ capacitor motor Diagonal, 1~ capacitor motor Diagonal, three-phase motor Operating temperature range -30°C...+55°C -30°C...+55°C -30°C...+55°C Storage temperature range -30°C...+70°C -30°C...+70°C -30°C...+70°C 65 / 66 65 / 66 65 / 66 3243.200 3243.200 3243.200 372 see page see page see page 371 Fan Noise level dB(A) Accessories Outlet filter 1 pc(s). Spare filter mats 5 pc(s). 3183.100 3183.100 3183.100 371 Hose-proof hood 1 pc(s). 3243.080 3243.080 3243.080 372 Blanking cover 2 pc(s). 3243.020 3243.020 3243.020 372 Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 – 379 Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 – 379 Hygrostat 1 pc(s). 3118.000 3118.000 – 380 Speed control 1 pc(s). 3120.200 3120.200 – 381 Accessories Fine filter mats 318 Spare filter mats see page 371 Rittal Catalogue 34/Climate control TopTherm fan-and-filter units Air throughputs incl. outlet filter and protection categories Page 323 Climate control accessories Page 369 Therm software Page 385 Colour: – RAL 7035 Supply includes: – Complete unit ready to install, including filter mat Note: – For even more efficient operation or for monitoring the fanand-filter units, we recommend the use of an EC speed control for EC fan-and-filter units Approvals: Available on the Internet T2 T1 Performance diagrams: Available on the Internet Technical details: Available on the Internet H Energy-efficient version of the TopTherm fan-and-filter units with diagonal fan technology. Model numbers 3240.500 to 3245.510 have a control interface with tacho signal output integrated as standard, allowing the fan to be controlled and its speed monitored. B Air throughput 55 – 230 m³/h, with EC technology Model No. Packs of Control interface Rated operating voltage V, ~, Hz Air throughput, unimpeded air flow m³/h Rated current A 3238.500 3239.500 3240.500 3241.500 – – ◾ ◾ 200 - 240, 1~, 50/60 200 - 240, 1~, 50/60 200 - 240, 1~, 50/60 200 - 240, 1~, 50/60 55 105 180 230 0.17 0.05 0.05 0.12 Pre-fuse A 6 6 6 6 Power consumption W 6 6 11 16 Width (B) mm 148.5 204 255 255 Height (H) mm 148.5 204 255 255 Depth (T1) mm 16 24 25 25 58.5 90 107 107 Max. installation depth (T2) mm Required mounting cut-out (BxH) mm Page 124 x 124 177 x 177 224 x 224 224 x 224 Diagonal, EC motor Diagonal, EC motor Diagonal, EC motor Diagonal, EC motor Operating temperature range -20°C...+55°C -20°C...+55°C -25°C...+55°C -25°C...+55°C Storage temperature range -30°C...+70°C -30°C...+70°C -25°C...+70°C -25°C...+70°C 49 53 47 52 3238.200 3239.200 3240.200 3240.200 372 see page see page see page see page 371 Fan Noise level dB(A) Accessories Outlet filter 1 pc(s). Spare filter mats Fine filter mats 5 pc(s). 3238.055 3181.100 3182.100 3182.100 371 Hose-proof hood 1 pc(s). 3238.080 3239.080 3240.080 3240.080 372 Blanking cover 2 pc(s). 3238.020 3239.020 3240.020 3240.020 372 – – from page from page 380 EC speed control Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 3110.000 3110.000 379 Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 3114.200 3114.200 379 Hygrostat 1 pc(s). 3118.000 3118.000 3118.000 3118.000 380 Rittal Catalogue 34/Climate control 319 TopTherm fan-and-filter units Air throughput 550 – 900 m³/h, with EC technology Model No. Packs of Control interface Rated operating voltage V, ~, Hz 3243.500 3244.500 3245.500 3245.510 ◾ ◾ ◾ ◾ 200 - 240, 1~, 50/60 200 - 240, 1~, 50/60 200 - 240, 1~, 50/60 100 - 130, 1~, 50/60 Air throughput, unimpeded air flow m³/h 550 700 900 900 Rated current A 2.1 0.5 0.7 1.33 Pre-fuse A 6 6 4 6 Power consumption W 51 80 165 165 Width (B) mm 323 323 323 323 Height (H) mm 323 323 323 323 Depth (T1) mm 25 25 25 25 118.5 130.5 130.5 130.5 Max. installation depth (T2) mm Required mounting cut-out (BxH) mm Page 292 x 292 292 x 292 292 x 292 292 x 292 Diagonal, EC motor Diagonal, EC motor Diagonal, EC motor Diagonal, EC motor Operating temperature range -25°C...+55°C -25°C...+55°C -25°C...+55°C -25°C...+55°C Storage temperature range -25°C...+70°C -25°C...+70°C -25°C...+70°C -25°C...+70°C 63 64 72 72 3243.200 3243.200 3243.200 3243.200 372 see page see page see page see page 371 Fan Noise level dB(A) Accessories Outlet filter 1 pc(s). Spare filter mats Fine filter mats 5 pc(s). 3183.100 3183.100 3183.100 3183.100 371 Hose-proof hood 1 pc(s). 3243.080 3243.080 3245.080 3245.080 372 Blanking cover 2 pc(s). 3243.020 3243.020 3243.020 3243.020 372 from page from page from page from page 380 EC speed control 1 pc(s). 3110.000 3110.000 3110.000 3110.000 379 Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 3114.200 3114.200 379 Hygrostat 1 pc(s). 3118.000 3118.000 3118.000 3118.000 380 Accessories Enclosure internal thermostat 320 EC speed control see page 380 Rittal Catalogue 34/Climate control TopTherm fan-and-filter units Air throughputs incl. outlet filter and protection categories Page 323 Climate control accessories Page 369 Therm software Page 385 Colour: – RAL 7035 Approvals: Available on the Internet T2 T1 Performance diagrams: Available on the Internet Technical details: Available on the Internet H Supply includes: – Complete unit ready to install, including filter mat Note: – For energy-efficient operation of the fan-and-filter units, we recommend using the enclosure internal thermostat, the speed control or the digital enclosure internal temperature display and thermostat B Air throughput 20 – 180 m³/h, EMC Model No. Packs of 3237.600 3238.600 3239.600 3240.600 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 20 / 25 55 / 66 105 / 120 180 / 160 0.065 / 0.052 0.12 / 0.11 0.12 / 0.11 0.21 / 0.19 2 2 2 2 Power consumption W 11 / 9 19 / 18 19 / 18 35 / 34 Width (B) mm 116.5 148.5 204 255 Height (H) mm 116.5 148.5 204 255 Depth (T1) mm 16 16 24 25 Max. installation depth (T2) mm 43 58.5 90 107 Rated operating voltage V, ~, Hz Air throughput, unimpeded air flow m³/h Rated current A Pre-fuse A Required mounting cut-out (BxH) mm 92 x 92 124 x 124 177 x 177 224 x 224 Axial, self-starting shaded pole motor Diagonal, self-starting shaded pole motor Diagonal, self-starting shaded pole motor Diagonal, self-starting shaded pole motor Operating temperature range -15°C...+55°C -15°C...+55°C -15°C...+55°C -30°C...+55°C Storage temperature range -30°C...+70°C -30°C...+70°C -30°C...+70°C -30°C...+70°C 38 / 43 46 / 49 46 / 49 51 / 46 Fan Noise level dB(A) Page Accessories Outlet filter 1 pc(s). 3237.060 3238.060 3239.060 3240.060 Spare filter mats 5 pc(s). 3237.066 3238.066 3239.066 3240.066 372 371 Fine filter mats 5 pc(s). – 3238.055 3181.100 3182.100 371 372 Hose-proof hood 1 pc(s). 3237.080 3238.080 3239.080 3240.080 Blanking cover 2 pc(s). 3237.020 3238.020 3239.020 3240.020 372 – – – – 380 EC speed control Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 3110.000 3110.000 379 Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 3114.200 3114.200 379 Hygrostat 1 pc(s). 3118.000 3118.000 3118.000 3118.000 380 Speed control 1 pc(s). 3120.200 3120.200 3120.200 3120.200 381 Rittal Catalogue 34/Climate control 321 TopTherm fan-and-filter units Air throughput 230 – 900 m³/h, EMC Model No. Packs of Rated operating voltage V, ~, Hz 3241.600 3243.600 3244.600 3245.600 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 200 - 240, 1~, 50/60 Air throughput, unimpeded air flow m³/h 230 / 250 550 / 600 700 / 770 900 Rated current A 0.26 / 0.24 0.37 / 0.39 0.43 / 0.6 1.33 / 1.33 Pre-fuse A 4 4 4 4 40 / 42 70 / 87 95 / 135 165 / 165 Width (B) mm 255 323 323 323 Height (H) mm 255 323 323 323 Depth (T1) mm 25 25 25 25 Max. installation depth (T2) mm 107 118.5 130.5 130.5 Power consumption W Required mounting cut-out (BxH) mm 224 x 224 292 x 292 292 x 292 292 x 292 Diagonal, self-starting shaded pole motor Diagonal, 1~ capacitor motor Diagonal, 1~ capacitor motor Diagonal, EC motor Operating temperature range -30°C...+55°C -30°C...+55°C -30°C...+55°C -25°C...+55°C Storage temperature range -30°C...+70°C -30°C...+70°C -30°C...+70°C +-25°C...+70°C 54 / 56 59 / 61 65 / 66 72 Fan Noise level dB(A) Page Accessories Outlet filter 1 pc(s). 3240.060 3243.060 3243.060 3243.060 Spare filter mats 5 pc(s). 3240.066 3243.066 3243.066 3243.066 372 371 Fine filter mats 5 pc(s). 3182.100 3183.100 3183.100 3183.100 371 372 Hose-proof hood 1 pc(s). 3240.080 3243.080 3243.080 3245.080 Blanking cover 2 pc(s). 3240.020 3243.020 3243.020 3243.020 372 – – – from page 380 EC speed control 1 pc(s). 3110.000 3110.000 3110.000 3110.000 379 Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 3114.200 3114.200 379 Hygrostat 1 pc(s). 3118.000 3118.000 3118.000 3118.000 380 Speed control 1 pc(s). 3120.200 3120.200 3120.200 – 381 Accessories Enclosure internal thermostat 322 Therm software see page 385 Rittal Catalogue 34/Climate control TopTherm fan-and-filter units Air throughput and protection category TopTherm fan-and-filter units Air throughput m3/h at 50/60 Hz Model No. 3237.100 3237.110 3237.124 3238.100 3238.110 3238.124 3239.100 3239.110 3239.124 3240.100 3240.110 3240.124 3241.100 3241.110 3241.124 3243.100 3243.110 Unimpeded air flow 20/25 Protection category IP to IEC 60 529 With outlet filter including filter mat Standard 1 x 3237.200 15/18 – 55/66 1 x 3238.200 43/50 2 x 3238.200 48/57 55 1 x 3238.200 43 2 x 3238.200 48 105/120 1 x 3239.200 87/100 2 x 3239.200 93/108 1 x 3240.200 98/111 105 1 x 3239.200 87 2 x 3239.200 93 1 x 3240.200 98 180/160 1 x 3240.200 138/115 2 x 3240.200 165/140 1 x 3243.200 165/140 180 1 x 3240.200 138 2 x 3240.200 165 1 x 3243.200 165 230/250 1 x 3240.200 183/195 2 x 3240.200 203/230 1 x 3243.200 203/230 230 1 x 3240.200 183 2 x 3240.200 203 1 x 3243.200 203 550/600 1 x 3243.200 440/490 2 x 3243.200 510/560 – 700/770 1 x 3243.200 544/610 2 x 3243.200 630/690 – – With additional fine filter mat With hose-proof hood – 20 – IP 54 IP 55 IP 56 3244.100 3244.110 3244.140 TopTherm fan-and-filter units with EC technology Air throughput m3/h at 50/60 Hz Model No. Unimpeded air flow Protection category IP to IEC 60 529 With outlet filter including filter mat 55 1 x 3238.200 43 2 x 3238.200 48 – 3239.500 105 1 x 3239.200 87 2 x 3239.200 93 1 x 3240.200 98 3240.500 180 1 x 3240.200 138 2 x 3240.200 165 1 x 3243.200 165 3241.500 230 1 x 3240.200 183 2 x 3240.200 203 1 x 3243.200 203 3243.500 550 1 x 3243.200 440 2 x 3243.200 510 – 3244.500 700 1 x 3243.200 544 2 x 3243.200 630 – 3245.500 900 1 x 3243.200 680 2 x 3243.200 820 – 900 1 x 3243.200 680 2 x 3243.200 820 – 3238.500 3245.510 Standard With additional fine filter mat IP 54 IP 55 With hose-proof hood IP 56 IP 51 IP 52 TopTherm fan-and-filter units, EMC Air throughput m3/h at 50/60 Hz Model No. Unimpeded air flow Protection category IP to IEC 60 529 With EMC outlet filter including EMC filter mat 20/25 1 x 3237.060 15/18 – – 3238.600 55/66 1 x 3238.060 43/50 2 x 3238.060 48/57 – 3239.600 105/120 1 x 3239.060 87/100 2 x 3239.060 93/108 1 x 3240.060 98/111 3240.600 180/160 1 x 3240.060 138/115 2 x 3240.060 165/140 1 x 3243.060 165/140 3241.600 230/250 1 x 3240.060 183/195 2 x 3240.060 203/230 1 x 3243.060 203/230 3243.600 550/600 1 x 3243.060 440/490 2 x 3243.060 510/560 – 3244.600 700/770 1 x 3243.060 544/610 2 x 3243.060 630/690 – 3245.600 900 1 x 3243.060 680 2 x 3243.060 820 – 3237.600 Rittal Catalogue 34/Climate control Standard With additional fine filter mat With hose-proof hood – IP 54 IP 55 IP 51 IP 56 IP 52 323 TopTherm roof-mounted fans Climate control accessories Page 369 Vent attachment TS Page 383 The active roof-mounted fans fit precisely onto the cut-outs of the small and medium performance categories of TopTherm roofmounted cooling units. Material: – Sheet steel, spray-finished Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 43 Technical details: Available on the Internet Supply includes: – Unit ready for connection with built-in radial fan – Sealing and assembly parts Air throughput 400 – 800 m³/h Model No. Packs of Rated operating voltage V, ~, Hz 3149.410 3149.420 115, 1~, 50/60 230, 1~, 50/60 Air throughput, unimpeded air flow m³/h 3149.440 3149.810 3149.820 3149.840 400, 3~, 50/60 400, 3~, 50/60 115, 1~, 50/60 230, 1~, 50/60 460, 3~, 60 460, 3~, 60 400 400 400 800 800 800 Rated current A 1.1 / 1.6 0.55 / 0.88 0.35 / 0.35 1.5 / 2.2 0.75 / 1.1 0.35 / 0.55 Power consumption W 120 / 170 120 / 170 95 / 140 170 / 225 170 / 225 180 / 310 Width mm 550 550 550 550 550 550 Height mm 125 125 125 125 125 125 Depth mm 370 370 370 370 370 370 475 x 260 475 x 260 475 x 260 475 x 260 475 x 260 475 x 260 Required mounting cut-out mm Operating temperature range Page -10°C...+55°C -10°C...+55°C -10°C...+55°C -10°C...+55°C -10°C...+55°C -10°C...+55°C Noise level dB(A) Weight kg 68 / 69 68 / 69 68 / 69 69 / 70 69 / 70 69 / 70 10.0 10.0 10.0 11.0 11.0 11.0 Accessories Roof plates TS 1 pc(s). 8801.320 8801.320 8801.320 8801.320 8801.320 8801.320 383 Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 – 3114.200 3114.200 – 379 Speed control 1 pc(s). 3120.200 3120.200 – 3120.200 3120.200 – 381 Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 – 3110.000 3110.000 – 379 324 Rittal Catalogue 34/Climate control Roof-mounted fans, roof ventilation Climate control accessories Page 369 Material: – Sheet steel, spray-finished Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 43 Supply includes: – Unit ready for connection with built-in radial fan – Sealing and assembly parts – Connection cable (3 m) – Drilling template Note: – Via additional installation of the filter holder with filter mat, a protection category of IP 44 is achieved with roof vent 3148.007 Technical details: Available on the Internet Air throughput 360 m³/h Model No. Packs of Rated operating voltage V, ~, Hz 3148.007 3149.007 3169.007 115, 1~, 50/60 without fan motor 230, 1~, 50/60 Air throughput, unimpeded air flow m³/h – 360 360 Rated current A – 0.2 0.55 Power consumption W Width mm – 42 65 420 420 420 Height mm 65 95 95 Depth mm 340 340 340 Required mounting cut-out mm Operating temperature range Noise level dB(A) Weight kg 345 x 265 345 x 265 345 x 265 -10°C...+60°C -10°C...+60°C -10°C...+60°C – 53 53 6.8 7.8 7.8 Page Accessories Digital enclosure internal temperature display and thermostat 1 pc(s). – 3114.200 3114.200 379 Enclosure internal thermostat 1 pc(s). – 3110.000 3110.000 379 Filter holder 1 pc(s). 3175.000 – – 373 Rittal Catalogue 34/Climate control 325 Rack-mounted fans for 482.6 mm (19") Climate control accessories Page 369 Approvals: Available on the Internet 0 20 Technical details: Available on the Internet 0 18 41 0 73 44 Supply includes: – Fully wired unit ready for connection – Terminal strip and assembly parts 10 0 48 2.6 (19 ˝) Air throughput 320 – 480 m³/h Model No. Packs of With monitoring Rated operating voltage V, ~, Hz 3340.230 3341.115 3341.230 3342.024 3342.230 3342.500 – – – – – ◾ 24 (DC) 230, 1~, 50/60 115 - 230, 1~, 50/60 24 (DC) 480 230, 1~, 50/60 115, 1~, 50/60 230, 1~, 50/60 Air throughput, unimpeded air flow m³/h 320 480 480 480 480 No. of fans 2 3 3 3 3 3 Distance between axes mm 85 85 85 105 105 105 0.85 Rated current A 0.24 / 0.22 0.69 / 0.69 0.36 / 0.33 0.74 0.36 / 0.33 Pre-fuse A 6 6 6 6 6 6 Width mm 482.6 482.6 482.6 482.6 482.6 482.6 Height mm 44 44 44 44 44 44 Depth mm 200 200 200 200 200 200 Operating temperature range Page -10°C...+55°C -10°C...+55°C -10°C...+55°C -10°C...+55°C -10°C...+55°C -10°C...+55°C Noise level dB(A) 51 52 51 51 51 51 Accessories Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 379 Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 379 Speed control 1 pc(s). 3120.200 3120.200 3120.200 – 3120.200 – 381 326 Rittal Catalogue 34/Climate control Vario rack-mounted fans for 482.6 mm (19") Climate control accessories Page 369 Supply includes: – Fully wired unit ready for connection – Terminal strip and assembly parts. Approvals: Available on the Internet 4 21 6 20 Technical details: Available on the Internet 43 2 48 42 6 (19 ˝) 44 2.6 Air throughput 320 – 480 m³/h Model No. Packs of With monitoring Rated operating voltage V, ~, Hz Air throughput, unimpeded air flow m³/h 3350.230 3351.230 3352.230 3352.500 – – – ◾ 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 115 - 230, 1~, 50/60 24 (DC) 480 320 480 480 No. of fans 2 3 3 3 Distance between axes mm 85 85 105 105 0.85 / 0.85 Rated current A 0.24 / 0.22 0.36 / 0.33 0.36 / 0.33 Pre-fuse A 6 6 6 6 Width mm 482.6 482.6 482.6 482.6 Page Height mm 44 44 44 44 Depth mm 200 200 200 200 -10°C...+55°C -10°C...+55°C -10°C...+55°C -10°C...+55°C 51 51 51 51 3355.100 3355.100 3355.100 3357.100 384 379 Operating temperature range Noise level dB(A) Also required Guide frame 1 pc(s). Accessories Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 3114.200 3114.200 Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 3110.000 3110.000 379 Speed control 1 pc(s). 3120.200 3120.200 3120.200 – 381 Rittal Catalogue 34/Climate control 327 Tangential fans for 482.6 mm (19") Climate control accessories Page 369 Approvals: Available on the Internet 17 3 16 Technical details: Available on the Internet 38 0 88 Supply includes: – Fully wired unit ready for connection – Filter mat 48 2.6 (19 ˝) Air throughput 320 m³/h Model No. Packs of Rated operating voltage V, ~, Hz 3144.000 3145.000 230, 1~, 50/60 115, 1~, 50/60 Air throughput, unimpeded air flow m³/h 320 320 Rated current A 0.16 0.32 Power consumption W Width mm 37 37 482.6 482.6 Height mm 88 88 Depth mm 158 158 -10°C...+55°C -10°C...+55°C Operating temperature range Noise level dB(A) Speed rpm Maximum static pressure difference Pa 52 52 2245 2245 65 - 70 65 - 70 3114.200 Page Accessories Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 379 Filter mats 5 pc(s). 3177.000 3177.000 369 Front outlet grille 2 U 1 pc(s). 3176.000 3176.000 372 Roof-mounted fan, roof vent 1 pc(s). 3148.007 3148.007 325 Speed control 1 pc(s). 3120.200 3120.200 381 328 379 Rittal Catalogue 34/Climate control TopTherm air/air heat exchangers Climate control accessories Page 369 Temperature control: – Electronic control with digital display (factory setting +35°C) Protection category IP to IEC 60 529: – Internal circuit IP 54 Colour: – RAL 7035 Supply includes: – Complete unit ready for connection – Plug-in terminal strip – Floating fault signal contact in case of overtemperature Approvals: Available on the Internet Performance diagrams: Available on the Internet Technical details: Available on the Internet Specific thermal output 17.5 – 90 W/K, wall-mounted with controller Model No. Packs of Rated operating voltage V, ~, Hz Specific thermal output W/K Max. rated current per fan A Pre-fuse A 3126.100 3127.100 3128.100 3129.100 3130.100 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 17.5 30 45 60 90 0.11 / 0.13 0.28 / 0.34 0.3 / 0.4 0.38 / 0.4 0.67 / 0.88 2 2 2 2 4 23 / 27 60 / 75 70 / 90 85 / 90 150 / 200 Air throughput of fans (unimpeded air flow), external circuit m³/h 265 / 315 480 / 525 600 / 625 860 / 900 850 / 945 Air throughput of fans (unimpeded air flow), internal circuit m³/h 265 / 315 480 / 525 600 / 625 860 / 900 850 / 945 Width mm 280 400 400 400 400 Height mm 550 950 950 950 1580 Output per fan W Depth mm Operating temperature range Weight kg 150 205 205 225 215 -5°C...+55°C -5°C...+55°C -5°C...+55°C -5°C...+55°C -5°C...+55°C 10.0 18.0 19.0 21.0 34.0 Page Accessories Filter mats 3 pc(s). 3286.300 3286.400 3286.400 3286.400 3286.400 369 Metal filters 1 pc(s). 3286.310 3286.410 3286.410 3286.410 3286.410 370 Rittal Catalogue 34/Climate control 329 Air/air heat exchangers Climate control accessories Page 369 Therm software Page 385 Colour: – RAL 7035 – RAL 9005 Protection category IP to IEC 60 529: – Internal circuit IP 54 Supply includes: – Complete unit ready for connection – The fans are connected via two 3-wire connection cables, with wire end ferrules Note: – For precise temperature control inside the enclosure, we recommend the enclosure internal thermostat, the digital enclosure internal temperature display and thermostat or the speed control Technical details: Available on the Internet Specific thermal output 66 W/K, roof-mounted Model No. Packs of 3248.000 Rated operating voltage V, ~, Hz 230, 1~, 50/60 Specific thermal output W/K 66 No. of fans Page 2 Max. rated current per fan A 0.45 / 0.55 Pre-fuse A 4 Output per fan W 75 Air throughput of fans (unimpeded air flow), external circuit m³/h 965 Air throughput of fans (unimpeded air flow), internal circuit m³/h 965 Width mm 595 Height mm 362 Depth mm 440 Operating temperature range -5°C...+55°C Type of electrical connection Connection cable Weight kg 16.8 Accessories Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 379 Enclosure internal thermostat 1 pc(s). 3110.000 379 Hygrostat 1 pc(s). 3118.000 380 Speed control 1 pc(s). 3120.200 381 330 Rittal Catalogue 34/Climate control Efficient climate control solutions for every application 331 332 Rittal Catalogue 34/Climate control Cooling units Thermoelectric coolers Thermoelectric coolers ......................................................100 W ..............334 Wall-mounted cooling units TopTherm, horizontal format.............................................. 300 W ..............335 TopTherm..........................................................................300 W ..............336 TopTherm “Blue e” ............................................................ 500 W ..............337 TopTherm “Blue e” ............................................................ 750 W ..............338 TopTherm “Blue e” ..........................................................1000 W ..............339 TopTherm “Blue e” ..........................................................1500 W ..............340 TopTherm “Blue e” ..........................................................2000 W ..............341 TopTherm “Blue e” ..........................................................2500 W ..............342 TopTherm “Blue e” ..........................................................4000 W ..............342 TopTherm “Blue e”, slimline .............................................1500 W ..............343 TopTherm “Blue e”, NEMA 4X ............................... 500 – 1500 W ..............344 TopTherm “Blue e”, NEMA 4X ............................. 2000 – 2500 W ..............345 Roof-mounted cooling units TopTherm “Blue e” ............................................................ 500 W ..............346 TopTherm “Blue e” ............................................................ 750 W ..............347 TopTherm “Blue e” ..........................................................1000 W ..............347 TopTherm “Blue e” .............................................. 1100 – 1500 W ..............348 TopTherm “Blue e” ..........................................................2000 W ..............348 TopTherm “Blue e” .............................................. 3000 – 4000 W ..............349 Modular climate control concept Cooling module “Blue e” .........................................1500/2500 W ..............350 Section doors for installing cooling modules ................................ ..............351 Generation “Blue e” Permanent energy savings with Rittal cooling units. Up to 45% reduced energy consumption (70% over the Rittal TopTherm Plus cooling unit actually achieved in field trials). Rittal Catalogue 34/Climate control 333 Thermoelectric coolers Climate control accessories Page 369 Therm software Page 385 Material: – Aluminium, anodised Performance diagrams: Available on the Internet Colour of cover: – RAL 7024 Technical details: Available on the Internet T2 H Supply includes: – Thermoelectric climate control unit – Fully wired ready for connection (plug-in terminal strip) – Mounting accessories – Configuration software H Protection category IP to IEC 60 529: – External circuit IP 34 – Internal circuit IP 54 B B T1 T1 Total cooling output/heating output 100 W Model No. Packs of Rated operating voltage V, ~, Hz Total cooling output L35 L35 W 3201.200 3201.300 100 - 240, 1~, 50/60 24 (DC) 100 / 100 100 Heating output W 100 100 Width (B) mm 125 125 Height (H) mm 400 400 Depth (T1) mm 155 155 Installation depth (T2) mm 100 100 Start-up current A 6.4 4.5 Rated current max. A 1.9 4.5 Pre-fuse A 4 10 -30°C...+55°C -30°C...+60°C Refrigeration factor/COP 1 1.2 Power pack integrated ◾ – 50 / 50 50 / 50 3.0 2.4 Operating temperature range Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h Weight kg Page Accessories Spare filter mats 5 pc(s). 3201.050 3201.050 SK BUS system 1 pc(s). 3201.070 3201.070 382 Condensate hose 1 pc(s). 3301.606 3301.606 377 334 371 Rittal Catalogue 34/Climate control TopTherm wall-mounted cooling units, horizontal format Climate control accessories Page 369 Therm software Page 385 Colour: – RAL 7035 Protection category IP to IEC 60 529: – External circuit IP 34 – Internal circuit IP 54 Supply includes: – Nano-coated condenser – Fully wired ready for connection (plug-in terminal strip) – Drilling template – Assembly parts Approvals: Available on the Internet 340 Temperature control: – Basic controller (factory setting +35°C) Performance diagrams: Available on the Internet 52 5 Technical details: Available on the Internet 98 3 15 55 Output class 300 W Model No. Material Packs of Sheet steel Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Total cooling output 50/60 Hz L35 L35 kW Total cooling output 50/60 Hz L35 L50 kW 3302.300 3302.310 ◾ ◾ 0.36 – 0.36 / 0.38 0.38 0.21 / 0.22 0.23 230, 1~, 50/60 115, 1~, 60 Width mm 525 525 Height mm 340 340 Depth mm 153 153 Rated operating voltage V, ~, Hz Rated current max. A 1.6 / 1.7 4 Start-up current A 4.3 / 5.3 12 Pre-fuse A Power consumption Pel 50/60 Hz L35 L35 kW Power consumption Pel 50/60 Hz L35 L50 kW 10 10 0.27 / 0.29 0.32 0.31 / 0.33 0.37 Operating temperature range +10°C...+55°C +10°C...+55°C Setting range +30°C...+55°C +30°C...+55°C Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g Permissible operating pressure (p. max.) bar Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h Weight kg 1.3 1.18 R134a, 100 R134a, 95 25 25 310 / 310 300 / 300 13.0 13.0 Page Accessories Filter mats 3 pc(s). 3286.110 3286.110 369 Metal filters 1 pc(s). 3286.120 3286.120 370 Door-operated switch 1 pc(s). 4127.010 4127.010 639 Condensate hose 1 pc(s). 3301.608 3301.608 377 Rittal Catalogue 34/Climate control 335 TopTherm wall-mounted cooling units Climate control accessories Page 369 Therm software Page 385 Protection category IP to IEC 60 529: – External circuit IP 34 – Internal circuit IP 54 Supply includes: – Nano-coated condenser – Fully wired ready for connection (plug-in terminal strip) – Drilling template – Assembly parts Approvals: Available on the Internet Performance diagrams: Available on the Internet Technical details: Available on the Internet H Temperature control: – Basic controller (factory setting +35°C) B T Output class 300 W Model No. Material Packs of Sheet steel 3302.100 3302.110 3302.200 ◾ ◾ – ◾ Stainless steel – – RAL 7035 ◾ ◾ – 0.36 – 0.36 Total cooling output 50/60 Hz L35 L35 kW 0.36 / 0.38 0.38 0.36 / 0.38 Total cooling output 50/60 Hz L35 L50 kW 0.21 / 0.23 0.23 0.21 / 0.23 230, 1~, 50/60 115, 1~, 60 230, 1~, 50/60 Width (B) mm 280 280 280 Height (H) mm 550 550 550 Depth (T) mm 140 140 140 1.6 / 1.7 3.3 1.6 / 1.7 3 / 3.4 8 3 / 3.4 10 10 10 0.27 / 0.28 0.32 0.28 / 0.29 Colour Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Rated operating voltage V, ~, Hz Rated current max. A Start-up current A Pre-fuse A Power consumption Pel 50/60 Hz L35 L35 kW Power consumption Pel 50/60 Hz L35 L50 kW 0.28 / 0.3 0.37 0.29 / 0.31 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +30°C...+55°C +30°C...+55°C +30°C...+55°C 1.32 1.18 1.3 R134a, 100 R134a, 100 R134a, 100 Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g Permissible operating pressure (p. max.) bar Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h Weight kg 25 25 25 345 / 310 345 / 310 345 / 310 13.0 13.0 13.0 Page Accessories Filter mats 3 pc(s). 3286.300 3286.300 3286.300 Metal filters 1 pc(s). 3286.310 3286.310 3286.310 370 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 639 Condensate hose 1 pc(s). 3301.608 3301.608 3301.608 377 336 369 Rittal Catalogue 34/Climate control TopTherm wall-mounted cooling units "Blue e" Climate control accessories Page 369 Therm software Page 385 Protection category IP to IEC 60 529: – External circuit IP 34 – Internal circuit IP 54 Supply includes: – Nano-coated condenser – Fully wired ready for connection (plug-in terminal strip) – Drilling template – Assembly parts Approvals: Available on the Internet Performance diagrams: Available on the Internet Technical details: Available on the Internet H Temperature control: – e-Comfort controller (factory setting +35°C) B T Output class 500 W Model No. Material Packs of Sheet steel 3303.500 3303.510 3303.600 ◾ ◾ – ◾ Stainless steel – – RAL 7035 ◾ ◾ – 0.55 – 0.55 Total cooling output 50/60 Hz L35 L35 kW 0.55 / 0.66 0.66 0.55 / 0.66 Total cooling output 50/60 Hz L35 L50 kW 0.33 / 0.4 0.4 0.33 / 0.4 230, 1~, 50/60 115, 1~, 60 230, 1~, 50/60 Width (B) mm 280 280 280 Height (H) mm 550 550 550 Depth (T) mm 210 210 210 Rated current max. A 2.6 / 2.6 5.7 2.6 / 2.6 Start-up current A 5.1 / 6.4 11.5 5.1 / 6.4 10 10 10 0.39 / 0.41 0.5 0.39 / 0.41 Colour Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Rated operating voltage V, ~, Hz Pre-fuse A Power consumption Pel 50/60 Hz L35 L35 kW Power consumption Pel 50/60 Hz L35 L50 kW 0.45 / 0.42 0.53 0.45 / 0.42 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C 1.4 1.31 1.4 R134a, 170 R134a, 170 R134a, 170 Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g Permissible operating pressure (p. max.) bar Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h Weight kg 28 28 28 265 / 315 280 / 345 265 / 315 17.0 17.0 17.0 Page Accessories Filter mats 3 pc(s). 3286.300 3286.300 3286.300 Metal filters 1 pc(s). 3286.310 3286.310 3286.310 370 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 639 Condensate hose 1 pc(s). 3301.610 3301.610 3301.610 377 Rittal Catalogue 34/Climate control 369 337 TopTherm wall-mounted cooling units "Blue e" Output class 750 W Model No. Material Packs of Sheet steel 3361.500 3361.510 3361.540 3361.600 ◾ ◾ ◾ – ◾ Stainless steel – – – RAL 7035 ◾ ◾ ◾ – 0.85 – 0.85 0.85 Total cooling output 50/60 Hz L35 L35 kW 0.85 / 0.89 0.89 0.85 / 0.89 0.85 / 0.89 Total cooling output 50/60 Hz L35 L50 kW 0.67 / 0.67 0.67 0.67 / 0.67 0.67 / 0.67 230, 1~, 50/60 115, 1~, 60 400, 2~, 50/60 230, 1~, 50/60 Width (B) mm 280 280 280 280 Height (H) mm 550 550 550 550 Depth (T) mm 280 280 280 280 2.7 / 2.7 5.3 1.2 / 1.4 2.7 / 2.7 6 / 9.6 12 3.1 / 3.3 6 / 9.6 10 10 – 10 Transformer circuit-breaker A – – 6.3...10 – Toroidal transformer (external) Ø x D mm – – 126 x 65 – 0.41 / 0.44 0.56 0.41 / 0.44 0.41 / 0.44 Colour Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Rated operating voltage V, ~, Hz Rated current max. A Start-up current A Pre-fuse A Power consumption Pel 50/60 Hz L35 L35 kW Power consumption Pel 50/60 Hz L35 L50 kW 0.47 / 0.5 0.66 0.47 / 0.5 0.47 / 0.5 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C Operating temperature (max.) 60 Hz +10°C...+53°C +10°C...+52°C +10°C...+53°C +10°C...+53°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g 2.08 1.59 2.08 2.08 R134a, 280 R134a, 260 R134a, 280 R134a, 280 Permissible operating pressure (p. max.) bar 28 28 28 28 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 230 / 550 230 / 625 230 / 550 230 / 550 22.0 22.0 22.0 22.0 Weight kg Page Accessories 3 pc(s). 3286.300 3286.300 3286.300 3286.300 Metal filters 1 pc(s). 3286.310 3286.310 3286.310 3286.310 370 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 639 Condensate hose 1 pc(s). 3301.610 3301.610 3301.610 3301.610 377 Accessories Filter mats 338 369 Thermoelectric coolers see page 334 Rittal Catalogue 34/Climate control TopTherm wall-mounted cooling units "Blue e" Climate control accessories Page 369 Therm software Page 385 Protection category IP to IEC 60 529: – External circuit IP 34 – Internal circuit IP 54 Supply includes: – Nano-coated condenser – Integral electric condensate evaporation – Fully wired ready for connection (plug-in terminal strip) – Drilling template – Assembly parts Approvals: Available on the Internet Performance diagrams: Available on the Internet Technical details: Available on the Internet H Temperature control: – e-Comfort controller (factory setting +35°C) B T Output class 1000 W Model No. Material Colour Packs of Sheet steel 3304.500 3304.510 3304.540 3304.600 3304.640 ◾ ◾ ◾ – – Stainless steel – – – ◾ ◾ RAL 7035 ◾ ◾ ◾ – – Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW 1.1 1.1 1.1 1.1 1.1 Total cooling output 50/60 Hz L35 L35 kW 1.1 / 1.25 1.1 / 1.25 1.1 / 1.25 1.1 / 1.25 1.1 / 1.25 Total cooling output 50/60 Hz L35 L50 kW 0.91 / 0.9 0.91 / 0.9 0.98 / 0.9 0.91 / 0.9 0.98 / 0.9 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50 460, 3~, 60 230, 1~, 50/60 400, 3~, 50 460, 3~, 60 Width (B) mm 400 400 400 400 400 Height (H) mm 950 950 950 950 950 Depth (T) mm 260 260 260 260 260 Rated current max. A 5.4 / 5 10.6 / 11.1 2.8 / 2.9 5.4 / 5 2.8 / 2.4 Start-up current A 12 / 14 26 / 28 11.5 / 12.7 12 / 14 11.5 / 12.7 10 – – 10 – Transformer circuit-breaker A – 11...16 – – – Motor circuit-breaker A – – 6.3...10 – 6.3...10 0.64 / 0.79 Rated operating voltage V, ~, Hz Pre-fuse A Power consumption Pel 50/60 Hz L35 L35 kW 0.6 / 0.68 0.6 / 0.68 0.64 / 0.79 0.6 / 0.68 Power consumption Pel 50/60 Hz L35 L50 kW 0.71 / 0.81 0.71 / 0.81 0.73 / 0.9 0.71 / 0.81 0.73 / 0.9 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g 1.83 1.83 1.83 1.83 1.83 R134a, 325 R134a, 500 R134a, 325 R134a, 325 R134a, 325 Permissible operating pressure (p. max.) bar 28 28 28 28 28 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 600 / 900 600 / 900 600 / 900 600 / 900 600 / 900 39.0 44.0 40.0 39.0 40.0 Weight kg Page Accessories Filter mats 3 pc(s). 3286.400 3286.400 3286.400 3286.400 3286.400 369 Metal filters 1 pc(s). 3286.410 3286.410 3286.410 3286.410 3286.410 370 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 4127.010 639 Rittal Catalogue 34/Climate control 339 TopTherm wall-mounted cooling units "Blue e" Output class 1500 W Model No. Material Colour Packs of Sheet steel 3305.500 3305.510 3305.540 3305.600 3305.640 ◾ ◾ ◾ – – ◾ Stainless steel – – – ◾ RAL 7035 ◾ ◾ ◾ – – 1.6 1.6 1.6 1.6 1.6 Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Total cooling output 50/60 Hz L35 L35 kW 1.6 / 1.76 1.6 / 1.76 1.6 / 1.61 1.6 / 1.76 1.6 / 1.61 Total cooling output 50/60 Hz L35 L50 kW 1.25 / 1.37 1.25 / 1.37 1.33 / 1.35 1.25 / 1.37 1.33 / 1.35 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50 460, 3~, 60 230, 1~, 50/60 400, 3~, 50 460, 3~, 60 Width (B) mm 400 400 400 400 400 Height (H) mm 950 950 950 950 950 Depth (T) mm 260 260 260 260 260 Rated current max. A 5.5 / 5.8 11.5 / 12.5 2.5 / 2.8 5.5 / 5.8 2.5 / 2.8 Start-up current A 12 / 14 26 / 28 12.2 / 11.3 12 / 14 12.2 / 11.3 16 – – 16 – Transformer circuit-breaker A – 14...20 – – – Motor circuit-breaker A – – 6.3...10 – 6.3...10 Power consumption Pel 50/60 Hz L35 L35 kW 0.87 / 0.98 0.87 / 0.98 0.9 / 1.08 0.87 / 0.98 0.9 / 1.08 Power consumption Pel 50/60 Hz L35 L50 kW 1.03 / 1.15 1.03 / 1.15 1.06 / 1.25 1.03 / 1.15 1.06 / 1.25 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Rated operating voltage V, ~, Hz Pre-fuse A Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 1.83 1.83 1.83 1.83 1.83 R134a, 500 R134a, 500 R134a, 500 R134a, 500 R134a, 500 Permissible operating pressure (p. max.) bar 28 28 28 28 28 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 800 / 900 800 / 900 800 / 900 800 / 900 800 / 900 41.0 46.0 42.0 41.0 42.0 Refrigerant g Weight kg Page Accessories 3 pc(s). 3286.400 3286.400 3286.400 3286.400 3286.400 369 Metal filters 1 pc(s). 3286.410 3286.410 3286.410 3286.410 3286.410 370 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 4127.010 639 Accessories Filter mats 340 Therm software see page 385 Rittal Catalogue 34/Climate control TopTherm wall-mounted cooling units "Blue e" Climate control accessories Page 369 Therm software Page 385 Protection category IP to IEC 60 529: – External circuit IP 34 – Internal circuit IP 54 Supply includes: – Nano-coated condenser – Integral electric condensate evaporation – Fully wired ready for connection (plug-in terminal strip) – Drilling template – Assembly parts Approvals: Available on the Internet Performance diagrams: Available on the Internet Technical details: Available on the Internet H Temperature control: – e-Comfort controller (factory setting +35°C) Note: – Full installation not supported on model numbers 3332.XXX B T Output class 2000 W Model No. Material Colour Packs of Sheet steel 3328.500 3328.510 3328.540 3328.600 3328.640 ◾ ◾ ◾ – – Stainless steel – – – ◾ ◾ RAL 7035 ◾ ◾ ◾ – – Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW 2.2 2.2 2.2 2.2 2.2 Total cooling output 50/60 Hz L35 L35 kW 2.2 / 2.56 2.2 / 2.56 2.2 / 2.55 2.2 / 2.56 2.2 / 2.55 Total cooling output 50/60 Hz L35 L50 kW 1.82 / 1.95 1.82 / 1.95 1.65 / 1.89 1.82 / 1.95 1.65 / 1.89 230, 1~, 50/60 400, 3~, 50 460, 3~, 60 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50 460, 3~, 60 Width (B) mm 400 400 400 400 400 Height (H) mm 1580 1580 1580 1580 1580 Rated operating voltage V, ~, Hz Depth (T) mm 295 295 295 295 295 Rated current max. A 6.1 / 6.6 13.4 / 14.8 2.8 / 3.3 6.1 / 6.6 2.8 / 3.3 Start-up current A 20 / 22 40 / 38 6.8 / 7.8 20 / 22 6.8 / 7.8 16 – – 16 – Transformer circuit-breaker A – 18...25 – – – Motor circuit-breaker A – – 6.3...10 – 6.3...10 Power consumption Pel 50/60 Hz L35 L35 kW 0.92 / 1.03 0.92 / 1.03 0.92 / 1.15 0.92 / 1.03 0.93 / 1.15 Power consumption Pel 50/60 Hz L35 L50 kW 1.06 / 1.23 1.06 / 1.23 1.15 / 1.4 1.06 / 1.23 1.15 / 1.4 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Pre-fuse A Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g 2.4 2.4 2.2 2.4 2.2 R134a, 950 R134a, 950 R134a, 950 R134a, 950 R134a, 950 Permissible operating pressure (p. max.) bar 28 28 28 28 28 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 980 / 980 980 / 980 900 / 900 980 / 980 900 / 900 66.0 73.0 67.0 66.0 67.0 Weight kg Page Accessories Filter mats 3 pc(s). 3286.400 3286.400 3286.400 3286.400 3286.400 369 Metal filters 1 pc(s). 3286.410 3286.410 3286.410 3286.410 3286.410 370 Rittal Catalogue 34/Climate control 341 TopTherm wall-mounted cooling units "Blue e" Output class 2500 W Model No. Material Packs of Sheet steel 3329.500 3329.510 3329.540 3329.600 3329.640 ◾ ◾ ◾ – – ◾ Stainless steel – – – ◾ RAL 7035 ◾ ◾ ◾ – – 2.55 2.55 2.55 2.55 2.55 Total cooling output 50/60 Hz L35 L35 kW 2.55 / 2.71 2.55 / 2.71 2.55 / 2.75 2.55 / 2.71 2.55 / 2.75 Total cooling output 50/60 Hz L35 L50 kW 1.89 / 1.97 1.89 / 1.97 1.95 / 2 1.89 / 1.97 1.95 / 2 230, 1~, 50/60 400, 3~, 50 460, 3~, 60 Colour Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW 230, 1~, 50/60 115, 1~, 50/60 400, 3~, 50 460, 3~, 60 Width (B) mm 400 400 400 400 400 Height (H) mm 1580 1580 1580 1580 1580 Rated operating voltage V, ~, Hz Depth (T) mm 295 295 295 295 295 Rated current max. A 8.2 / 9.3 17 / 22 3.7 / 3.8 8.2 / 9.3 3.7 / 3.8 Start-up current A 20 / 24 44 / 42 6.8 / 7.6 20 / 24 6.8 / 7.6 16 – – 16 – Transformer circuit-breaker A – 18...25 – – – Motor circuit-breaker A – – 6.3...10 – 6.3...10 Power consumption Pel 50/60 Hz L35 L35 kW 1.21 / 1.35 1.21 / 1.35 1.2 / 1.4 1.21 / 1.35 1.2 / 1.4 Power consumption Pel 50/60 Hz L35 L50 kW 1.41 / 1.64 1.41 / 1.64 1.45 / 1.75 1.41 / 1.64 1.45 / 1.75 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Pre-fuse A Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 2.11 2.11 2.11 2.11 2.11 R134a, 950 R134a, 950 R134a, 950 R134a, 950 R134a, 950 Permissible operating pressure (p. max.) bar 28 28 28 28 28 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 1230 / 1230 1230 / 1230 1200 / 1200 1230 / 1230 1200 / 1200 69.0 76.0 70.0 69.0 70.0 Refrigerant g Weight kg Page Accessories Filter mats 3 pc(s). 3286.400 3286.400 3286.400 3286.400 3286.400 369 Metal filters 1 pc(s). 3286.410 3286.410 3286.410 3286.410 3286.410 370 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 4127.010 639 Output class 4000 W Model No. Material Colour Packs of 3332.540 3332.640 ◾ – Stainless steel – ◾ RAL 7035 ◾ – Sheet steel Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Total cooling output 50/60 Hz L35 L35 kW 3.95 3.95 3.95 / 4.35 3.95 / 4.35 Total cooling output 50/60 Hz L35 L50 kW 3.02 / 3.52 3.02 / 3.52 Rated operating voltage V, ~, Hz 400, 3~, 50 460, 3~, 60 400, 3~, 50 460, 3~, 60 Width (B) mm 500 500 Height (H) mm 1580 1580 Depth (T) mm 340 340 Rated current max. A 4.2 / 4.2 4.2 / 4.2 Start-up current A 9.2 / 11 9.2 / 11 Pre-fuse – – Transformer circuit-breaker – – 6.3...10 6.3...10 Motor circuit-breaker A Power consumption Pel 50/60 Hz L35 L35 kW 1.6 / 2 1.6 / 2 Power consumption Pel 50/60 Hz L35 L50 kW 1.87 / 2.34 1.87 / 2.34 Operating temperature range +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C 2.47 2.47 R134a, 2995 R134a, 2995 Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g Permissible operating pressure (p. max.) bar 28 28 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 1500 / 2000 1500 / 2000 91.0 91.0 Weight kg Page Accessories Filter mats 3 pc(s). 3286.400 3286.400 Metal filters 1 pc(s). 3286.410 3286.410 370 Door-operated switch 1 pc(s). 4127.010 4127.010 639 342 369 Rittal Catalogue 34/Climate control TopTherm wall-mounted cooling units "Blue e", slimline Climate control accessories Page 369 Therm software Page 385 Temperature control: – e-Comfort controller (factory setting +35°C) Protection category IP to IEC 60 529: – External circuit IP 34 – Internal circuit IP 54 Supply includes: – Nano-coated condenser – Integral electric condensate evaporation – Fully wired ready for connection (plug-in terminal strip) – Drilling template – Assembly parts Approvals: Available on the Internet Performance diagrams: Available on the Internet Technical details: Available on the Internet Output class 1500 W Model No. Packs of Material Sheet steel Colour RAL 7035 Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW 3366.500 3366.540 ◾ ◾ ◾ ◾ 1.6 1.6 Total cooling output 50/60 Hz L35 L35 kW 1.6 / 1.6 1.6 / 1.6 Total cooling output 50/60 Hz L35 L50 W 1.15 / 1.2 1.08 / 1.18 230, 1~, 50/60 400, 3~, 50 460, 3~, 60 Rated operating voltage V, ~, Hz Width mm 435 435 Height mm 1590 1590 Depth mm 205 205 Rated current max. A 6.7 / 6.9 2.7 / 2.9 Start-up current A 22 / 24 8 / 8.8 Pre-fuse A 10 – – 6.3...10 Power consumption Pel 50/60 Hz L35 L35 kW 0.84 / 0.97 0.91 / 1.06 Power consumption Pel 50/60 Hz L35 L50 kW 1.02 / 1.13 1.08 / 1.25 Operating temperature range +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C Motor circuit-breaker A Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g Permissible operating pressure (p. max.) bar Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h Weight kg 1.9 1.9 R134a, 700 R134a, 700 28 28 860 / 910 860 / 910 45.0 46.0 Page Accessories Filter mats 3 pc(s). 3286.400 3286.400 369 Metal filters 1 pc(s). 3286.410 3286.410 370 Door-operated switch 1 pc(s). 4127.010 4127.010 639 Rittal Catalogue 34/Climate control 343 46 TopTherm wall-mounted cooling units "Blue e", NEMA 4X Climate control accessories Page 369 Therm software Page 385 Temperature control: – e-Comfort controller (factory setting +35°C) Protection category NEMA: – NEMA 4X Supply includes: – Nano-coated condenser – Integral electric condensate evaporation – Fully wired ready for connection (plug-in terminal strip) – Drilling template – Assembly parts Note: – 3303.XXX without integral condensate evaporation Approvals: Available on the Internet Performance diagrams: Available on the Internet Technical details: Available on the Internet Output class 500 – 1500 W Model No. 3303.504 3303.514 3304.504 3304.544 3305.504 3305.544 ◾ ◾ ◾ ◾ ◾ ◾ 0.55 – 1.1 1.1 1.6 1.6 Total cooling output 50/60 Hz L35 L35 kW 0.55 / 0.66 0.66 1.1 / 1.25 1.1 / 1.25 1.6 / 1.76 1.6 / 1.61 Total cooling output 50/60 Hz L35 L50 kW 0.33 / 0.4 0.4 0.91 / 0.9 0.98 / 0.91 1.25 / 1.37 1.33 / 1.35 230, 1~, 50/60 115, 1~, 60 230, 1~, 50/60 400, 3~, 50 460, 3~, 60 230, 1~, 50/60 400, 3~, 50 460, 3~, 60 Width mm 285 285 405 405 405 405 Height mm 620 620 1020 1020 1020 1020 Material Packs of Stainless steel Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Rated operating voltage V, ~, Hz Depth mm 298 298 358 358 358 358 Rated current max. A 2.6 / 2.6 5.7 3.9 / 4.3 2.2 / 2.1 5.5 / 5.8 2.6 / 2.8 Start-up current A 5.1 / 6.4 11.5 12 / 14 11.5 / 12.7 12 / 14 12.2 / 11.3 10 10 10 – 16 – – – – 6.3...10 – 6.3...10 Power consumption Pel 50/60 Hz L35 L35 kW 0.36 / 0.38 0.47 0.6 / 0.68 0.64 / 0.82 0.79 / 0.98 0.9 / 1.08 Power consumption Pel 50/60 Hz L35 L50 kW 0.42 / 0.39 0.5 0.71 / 0.81 0.73 / 0.93 0.9 / 1.15 1.06 / 1.25 Pre-fuse A Motor circuit-breaker A Operating temperature range +10°C...+50°C +10°C...+50°C +10°C...+50°C +10°C...+50°C +10°C...+50°C +10°C...+50°C Setting range +20°C...+50°C +20°C...+50°C +20°C...+50°C +20°C...+50°C +20°C...+50°C +20°C...+50°C Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g 1.4 1.31 1.83 1.83 1.83 1.83 R134a, 170 R134a, 170 R134a, 325 R134a, 325 R134a, 600 R134a, 600 Permissible operating pressure (p. max.) bar 28 28 28 28 28 28 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 265 / 315 280 / 345 600 / 900 600 / 900 800 / 900 800 / 900 25.0 25.0 49.0 50.0 51.0 52.0 4127.010 4127.010 4127.010 4127.010 4127.010 4127.010 Weight kg Page Accessories Door-operated switch 344 1 pc(s). 639 Rittal Catalogue 34/Climate control TopTherm wall-mounted cooling units "Blue e", NEMA 4X Output class 2000 – 2500 W Model No. Material Packs of Stainless steel Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW 3328.504 3328.544 3329.504 3329.544 ◾ ◾ ◾ ◾ 2.2 2.2 2.55 2.55 2.55 / 2.7 Total cooling output 50/60 Hz L35 L35 kW 2.2 / 2.36 2.2 / 2.35 2.55 / 2.66 Total cooling output 50/60 Hz L35 L50 kW 1.62 / 1.75 1.45 / 1.69 1.84 / 1.92 1.9 / 1.95 230, 1~, 50/60 400, 3~, 50 460, 3~, 60 230, 1~, 50/60 400, 3~, 50 460, 3~, 60 Width mm 405 405 405 405 Height mm 1650 1650 1650 1650 Rated operating voltage V, ~, Hz Depth mm 388 388 388 388 Rated current max. A 6.1 / 6.6 2.8 / 3.3 8.2 / 9.3 3.7 / 3.8 Start-up current A 20 / 22 6.8 / 7.8 20 / 24 6.8 / 7.6 16 – 16 – – 6.3...10 – 6.3...10 Power consumption Pel 50/60 Hz L35 L35 kW 0.92 / 1.06 0.92 / 1.15 1.21 / 1.35 1.2 / 1.4 Power consumption Pel 50/60 Hz L35 L50 kW 1.06 / 1.25 1.15 / 1.4 1.41 / 1.64 1.44 / 1.75 Operating temperature range +10°C...+50°C +10°C...+50°C +10°C...+50°C +10°C...+50°C Setting range +20°C...+50°C +20°C...+50°C +20°C...+50°C +20°C...+50°C 2.4 2.4 2.11 2.11 R134a, 900 R134a, 900 R134a, 900 R134a, 900 28 28 28 28 980 / 980 900 / 900 1230 / 1230 1200 / 1200 80.0 81.0 83.0 84.0 4127.010 4127.010 4127.010 4127.010 Pre-fuse A Motor circuit-breaker A Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g Permissible operating pressure (p. max.) bar Air throughput of fans (unimpeded air flow), Internal circuit / external circuit m³/h Weight kg Page Accessories Accessories Door-operated switch Rittal Catalogue 34/Climate control 1 pc(s). 639 Metal filters see page 370 345 TopTherm roof-mounted cooling units "Blue e" Climate control accessories Page 369 Therm software Page 385 Roof plates TS with mounting cut-out Page 383 Temperature control: – e-Comfort controller (factory setting +35°C) Protection category IP to IEC 60 529: – External circuit IP 34 – Internal circuit IP 54 Supply includes: – Nano-coated condenser – Integral electric condensate evaporation – Fully wired ready for connection (plug-in terminal strip) – Drilling template – Assembly parts Note: – The roof-mounted cooling units 3273.500 and 3273.515 are suitable for office applications due to their low noise level Approvals: Available on the Internet Performance diagrams: Available on the Internet Technical details: Available on the Internet Output class 500 W Model No. Material Packs of Sheet steel 3382.500 3382.510 3382.600 ◾ ◾ – ◾ Stainless steel – – RAL 7035 ◾ ◾ – 0.55 0.55 0.55 Total cooling output 50/60 Hz L35 L35 kW 0.55 / 0.62 0.55 / 0.62 0.55 / 0.62 Total cooling output 50/60 Hz L35 L50 kW 0.42 / 0.48 0.42 / 0.48 0.42 / 0.48 230, 1~, 50/60 115, 1~, 50/60 230, 1~, 50/60 Width mm 597 597 597 Height mm 417 417 417 Depth mm 380 380 380 Rated current max. A 2.3 / 2.6 4.7 / 5.4 2.3 / 2.6 Start-up current A 9.1 / 8.8 18.2 / 15.9 9.1 / 8.8 10 – 10 Transformer circuit-breaker A – 6.3...10 – Motor circuit-breaker – – – 0.27 / 0.31 0.27 / 0.32 0.27 / 0.32 Colour Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Rated operating voltage V, ~, Hz Pre-fuse A Power consumption Pel 50/60 Hz L35 L35 kW Power consumption Pel 50/60 Hz L35 L50 kW 0.31 / 0.37 0.31 / 0.37 0.31 / 0.37 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C 2.04 2.04 2.04 R134a, 300 R134a, 300 R134a, 300 Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g Permissible operating pressure (p. max.) bar Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h Weight kg 28 28 28 170 / 800 170 / 800 170 / 800 30.0 35.0 30.0 Page Accessories Filter mats 3 pc(s). 3286.500 3286.500 3286.500 Metal filters 1 pc(s). 3286.510 3286.510 3286.510 369 370 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 639 Air duct system 1 pc(s). 3286.870 3286.870 3286.870 374 Stoppers 2 pc(s). 3286.780 3286.780 3286.780 376 346 Rittal Catalogue 34/Climate control TopTherm roof-mounted cooling units "Blue e" Output class 750 W Model No. Material Packs of Sheet steel 3359.500 3359.510 3359.540 3359.600 ◾ ◾ ◾ – ◾ Stainless steel – – – RAL 7035 ◾ ◾ ◾ – 0.77 0.77 0.77 0.77 Total cooling output 50/60 Hz L35 L35 kW 0.77 / 0.79 0.77 / 0.79 0.77 / 0.79 0.77 / 0.79 Total cooling output 50/60 Hz L35 L50 kW 0.52 / 0.47 0.52 / 0.47 0.52 / 0.47 0.52 / 0.47 230, 1~, 50/60 115, 1~, 50/60 400, 2~, 50/60 230, 1~, 50/60 Width mm 597 597 597 597 Height mm 417 417 417 417 Depth mm 380 380 380 380 2.8 / 3.7 5.6 / 7.4 1.6 / 2.1 2.8 / 3.7 9.2 / 9 18.4 / 18 5.4 / 5.2 9.2 / 9 10 – – 10 – 11...16 6.3...10 – 0.33 / 0.43 0.33 / 0.43 0.33 / 0.43 0.33 / 0.43 Colour Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Rated operating voltage V, ~, Hz Rated current max. A Start-up current A Pre-fuse A Transformer circuit-breaker A Power consumption Pel 50/60 Hz L35 L35 kW Power consumption Pel 50/60 Hz L35 L50 kW 0.49 / 0.42 0.49 / 0.42 0.49 / 0.42 0.49 / 0.42 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C 2.28 2.28 2.28 2.28 R134a, 400 Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g R134a, 400 R134a, 400 R134a, 400 Permissible operating pressure (p. max.) bar 28 28 28 28 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 585 / 800 440 / 910 585 / 800 585 / 800 32.0 37.0 37.0 32.0 Weight kg Page Accessories Filter mats 3 pc(s). 3286.500 3286.500 3286.500 3286.500 Metal filters 1 pc(s). 3286.510 3286.510 3286.510 3286.510 369 370 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 639 Air duct system 1 pc(s). 3286.870 3286.870 3286.870 3286.870 374 Stoppers 2 pc(s). 3286.780 3286.780 3286.780 3286.780 376 Packs of 3383.500 3383.510 3383.540 3383.600 Page ◾ ◾ ◾ – Output class 1000 W Model No. Material Colour Sheet steel Stainless steel – – – ◾ RAL 7035 ◾ ◾ ◾ – Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Total cooling output 50/60 Hz L35 L35 kW Total cooling output 50/60 Hz L35 L50 kW 1 1 1 1 1 / 1.09 1 / 1.09 1 / 1.09 1 / 1.09 0.71 / 0.81 0.71 / 0.81 0.71 / 0.81 0.71 / 0.81 230, 1~, 50/60 115, 1~, 50/60 400, 2~, 50/60 230, 1~, 50/60 Width mm 597 597 597 597 Height mm 417 417 417 417 Depth mm 475 475 475 475 Rated current max. A 2.9 / 3.9 6.2 / 8.4 1.7 / 2.2 2.9 / 3.9 Start-up current A 8.8 / 10 14.4 / 15.8 4.6 / 5.7 8.8 / 10.1 10 – – 10 – 11...16 6.3...10 – 0.39 / 0.48 0.39 / 0.45 0.39 / 0.45 0.39 / 0.46 Rated operating voltage V, ~, Hz Pre-fuse A Transformer circuit-breaker A Power consumption Pel 50/60 Hz L35 L35 kW Power consumption Pel 50/60 Hz L35 L50 kW 0.45 / 0.57 0.43 / 0.54 0.42 / 0.54 0.43 / 0.55 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g 2.58 2.58 2.58 2.58 R134a, 650 R134a, 650 R134a, 650 R134a, 650 Permissible operating pressure (p. max.) bar 28 28 28 28 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 491 / 1600 491 / 1600 491 / 1600 491 / 1600 40.0 46.0 46.0 40.0 Weight kg Accessories Filter mats 3 pc(s). 3286.500 3286.500 3286.500 3286.500 Metal filters 1 pc(s). 3286.510 3286.510 3286.510 3286.510 369 370 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 639 Air duct system 1 pc(s). 3286.870 3286.870 3286.870 3286.870 374 Stoppers 2 pc(s). 3286.880 3286.880 3286.880 3286.880 376 Rittal Catalogue 34/Climate control 347 TopTherm roof-mounted cooling units "Blue e" Output class 1100 – 1500 W Model No. Material Colour Packs of Sheet steel 3273.500 3273.515 3384.500 3384.510 3384.540 3384.600 ◾ ◾ ◾ ◾ ◾ – ◾ Stainless steel – – – – – RAL 7035 ◾ ◾ ◾ ◾ ◾ – 1.1 1.1 1.5 1.5 1.5 1.5 Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Total cooling output 50/60 Hz L35 L35 kW 1.1 / 1.2 1.1 / 1.2 1.5 / 1.65 1.5 / 1.65 1.5 / 1.65 1.5 / 1.65 Total cooling output 50/60 Hz L35 L50 kW 0.85 / 0.87 0.85 / 0.87 1.15 / 1.3 1.15 / 1.3 1.15 / 1.3 1.15 / 1.3 Page 110 (DC), 1~, 230, 1~, 50/60 230, 1~, 50/60 115, 1~, 50/60 400, 2~, 50/60 230, 1~, 50/60 50/60 Rated operating voltage V, ~, Hz Width mm 597 597 597 597 597 597 Height mm 417 417 417 417 417 417 Depth mm 475 475 475 475 475 475 5.2 / 5.4 11 / 11.5 3.9 / 4.8 8.5 / 15.3 2.4 / 2.8 3.9 / 4.8 15.5 / 16.5 32 / 35 14.8 / 16 27.4 / 27.2 8.7 / 9 14.8 / 16 10 – 10 – – 10 – 11...16 – 14...20 6.3...10 – 0.52 / 0.54 0.52 / 0.54 0.67 / 0.77 0.67 / 0.76 0.67 / 0.76 0.67 / 0.77 0.59 / 0.73 0.59 / 0.74 0.79 / 0.91 0.8 / 0.93 0.79 / 0.93 0.79 / 0.91 Rated current max. A Start-up current A Pre-fuse A Transformer circuit-breaker A Power consumption Pel 50/60 Hz L35 L35 kW Power consumption Pel 50/60 Hz L35 L50 kW Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g 2.16 2.16 2.24 2.24 2.24 2.24 R134a, 700 R134a, 700 R134a, 700 R134a, 700 R134a, 700 R134a, 700 Permissible operating pressure (p. max.) bar 28 28 28 28 28 28 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 440 / 1760 440 / 1760 491 / 1600 491 / 1600 491 / 1600 491 / 1600 42.0 47.0 41.0 47.0 47.0 41.0 Weight kg Accessories Filter mats 3 pc(s). 3286.500 3286.500 3286.500 3286.500 3286.500 3286.500 369 Metal filters 1 pc(s). 3286.510 3286.510 3286.510 3286.510 3286.510 3286.510 370 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 4127.010 4127.010 639 Air duct system 1 pc(s). 3286.870 3286.870 3286.870 3286.870 3286.870 3286.870 374 Stoppers 2 pc(s). 3286.880 3286.880 3286.880 3286.880 3286.880 3286.880 376 Output class 2000 W Model No. Material Colour Packs of Sheet steel 3385.500 3385.510 3385.540 3385.600 3385.640 ◾ ◾ ◾ – – ◾ Stainless steel – – – ◾ RAL 7035 ◾ ◾ ◾ – – 2 2 2 2 2 Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Total cooling output 50/60 Hz L35 L35 kW 2 / 2.14 2 / 2.14 2 / 2.14 2 / 2.14 2 / 2.14 Total cooling output 50/60 Hz L35 L50 kW 1.41 / 1.51 1.41 / 1.51 1.41 / 1.51 1.41 / 1.51 1.41 / 1.51 Rated operating voltage V, ~, Hz 230, 1~, 50/60 115, 1~, 50/60 400, 2~, 50/60 230, 1~, 50/60 400, 2~, 50/60 Width mm 597 597 597 597 597 Height mm 417 417 417 417 417 Depth mm 475 475 475 475 475 5.9 / 6.3 14.2 / 15.4 3.7 / 4.2 6.3 / 7.2 3.7 / 4.2 19.7 / 17.9 36 / 32 36 / 32 19.7 / 17.9 36 / 32 10 10 – 10 – – – 6.3...10 – 6.3...10 Power consumption Pel 50/60 Hz L35 L35 kW 0.96 / 1.14 0.96 / 1.17 0.96 / 1.17 0.96 / 1.17 0.96 / 1.17 Power consumption Pel 50/60 Hz L35 L50 kW 1.07 / 1.23 1.07 / 1.24 1.07 / 1.24 1.07 / 1.23 1.07 / 1.24 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Rated current max. A Start-up current A Pre-fuse A Transformer circuit-breaker A Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g 2.09 2.09 2.09 2.09 2.09 R134a, 900 R134a, 900 R134a, 900 R134a, 900 R134a, 900 Permissible operating pressure (p. max.) bar 28 28 28 28 28 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 470 / 1760 470 / 1760 470 / 1760 470 / 1760 470 / 1760 42.0 48.0 48.0 42.0 48.0 Weight kg Page Accessories Filter mats 3 pc(s). 3286.500 3286.500 3286.500 3286.500 3286.500 369 Metal filters 1 pc(s). 3286.510 3286.510 3286.510 3286.510 3286.510 370 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 4127.010 639 Air duct system 1 pc(s). 3286.870 3286.870 3286.870 3286.870 3286.870 374 Stoppers 2 pc(s). 3286.880 3286.880 3286.880 3286.880 3286.880 376 348 Rittal Catalogue 34/Climate control TopTherm roof-mounted cooling units "Blue e" Output class 3000 – 4000 W Model No. Material Colour Packs of 3386.540 3386.640 3387.540 3387.640 ◾ – ◾ – Stainless steel – ◾ – ◾ RAL 7035 ◾ – ◾ – 3 3 3.8 3.8 Sheet steel Total cooling output 50 Hz L35 L35 to DIN EN 14511 kW Total cooling output 50/60 Hz L35 L35 kW 3 / 3.3 3 / 3.3 3.8 / 4 3.8 / 4 Total cooling output 50/60 Hz L35 L50 kW 2.2 / 2.5 2.2 / 2.5 3.05 / 3.3 3.05 / 3.3 400, 3~, 50 460, 3~, 60 400, 3~, 50 460, 3~, 60 400, 3~, 50 460, 3~, 50 400, 3~, 50 460, 3~, 60 Width mm 796 796 796 796 Height mm 470 470 470 470 Depth mm 580 580 580 580 3.4 / 3.4 3.4 / 3.4 3.9 / 3.9 3.9 / 3.9 Rated operating voltage V, ~, Hz Rated current max. A Start-up current A 8/9 8/9 17 / 19 17 / 19 6.3...10 6.3...10 6.3...10 6.3...10 Power consumption Pel 50/60 Hz L35 L35 kW 1.17 / 1.48 1.17 / 1.48 1.59 / 2.03 1.59 / 2.03 Power consumption Pel 50/60 Hz L35 L50 kW 1.42 / 1.76 1.42 / 1.76 1.84 / 2.31 1.84 / 2.31 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Motor circuit-breaker A Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g 2.56 2.56 2.38 2.38 R134a, 1600 R134a, 1600 R134a, 1600 R134a, 1600 Permissible operating pressure (p. max.) bar 28 28 28 28 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 1280 / 3450 1280 / 3450 1420 / 3870 1420 / 3870 70.0 70.0 77.0 77.0 Weight kg Page Accessories Filter mats 3 pc(s). 3286.600 3286.600 3286.600 3286.600 Metal filters 1 pc(s). 3286.610 3286.610 3286.610 3286.610 369 370 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 639 1 pc(s). 3286.970 3286.970 3286.970 3286.970 374 Stoppers 2 pc(s). 3286.980 3286.980 3286.980 3286.980 376 Accessories Air duct system Rittal Catalogue 34/Climate control Air duct system see page 374 349 Modular climate control concept - Cooling module "Blue e" Climate control accessories Page 369 TS 8 enclosures Page 65 Therm software Page 385 All cooling modules are compatible with all section doors. Temperature control: – e-Comfort controller (factory setting +35°C) Material: – Sheet steel Colour: – RAL 7035 Protection category IP to IEC 60 529: – External circuit IP 34 – Internal circuit IP 54 Note: – A base/plinth with a height of 100 or 200 mm is required for efficient operation Supply includes: – Cooling module prepared for installation in section door – Nano-coated condenser – Integral electric condensate evaporation Approvals: Available on the Internet Performance diagrams: Available on the Internet Technical details: Available on the Internet Output class 1500 – 2500 W Model No. 3307.700 3307.740 3310.700 3310.740 ◾ ◾ ◾ ◾ 230, 1~, 50/60 400, 3~, 50 460, 3~, 60 230, 1~, 50/60 400, 3~, 50 460, 3~, 60 1.55 / 1.55 1.55 / 1.55 2.5 / 2.52 2.5 / 2.5 0.85 / 0.9 0.93 / 0.95 1.62 / 1.76 1.76 / 1.8 Rated current max. A 6 / 6.1 2.5 / 2.7 7.6 / 9.4 3.5 / 3.7 Start-up current A 22 / 24 8.5 / 9.2 22 / 24 13 / 14 16 – 16 – – 6.3...10 – 6.3...10 1.13 / 1.48 Material Packs of Sheet steel Rated operating voltage V, ~, Hz Total cooling output 50/60 Hz L35 L35 kW Total cooling output 50/60 Hz L35 L50 kW Pre-fuse A Motor circuit-breaker A Power consumption Pel 50/60 Hz L35 L35 kW 0.85 / 1.05 0.79 / 1 1.31 / 1.52 Power consumption Pel 50/60 Hz L35 L50 kW 1 / 1.15 0.9 / 1.1 1.48 / 1.85 1.4 / 1.75 Operating temperature range +10°C...+55°C +10°C...+55°C +10°C...+55°C +10°C...+55°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C 1.8 1.9 1.9 2.2 Energy efficiency ratio (EER) 50 Hz L35 L35 to DIN EN 14511 Refrigerant g Page R134a, 700 R134a, 700 R134a, 1175 R134a, 1175 Permissible operating pressure (p. max.) bar 28 28 30 30 Air throughput of fans (unimpeded air flow), internal circuit / external circuit m³/h 600 / 1100 600 / 1100 1100 / 1100 1100 / 1100 68.0 68.0 73.0 72.0 see page see page see page see page 351 Weight kg Also required Modular climate control concept - Section doors Accessories Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 639 SK BUS system 1 pc(s). 3124.100 3124.100 3124.100 3124.100 382 RiDiag II 1 pc(s). 3159.100 3159.100 3159.100 3159.100 385 Interface board 1 pc(s). 3124.200 3124.200 3124.200 3124.200 381 350 Rittal Catalogue 34/Climate control Modular climate control concept - Section doors Climate control accessories Page 369 TS 8 enclosures Page 65 Therm software Page 385 Note: The following information applies to 1200 mm wide TS 8 enclosures – With the unit positioned on the right, one pack consists of a section door for installing in the right-hand half of the enclosure plus a special lockable door for the left-hand half. – With the unit positioned on the left, one pack consists of a section door for installing in the left-hand half of the enclosure. The existing lockable door on the right may be used. Material: – Sheet steel Colour: – RAL 7035 Supply includes: – Section door without preconfigured cooling module – TS 8 hinges, door opening angle approx. 110° Approvals: Available on the Internet Technical details: Available on the Internet H H H H for installing cooling modules B B B B Model No. 3300.040 3300.050 3300.060 3300.070 3300.080 3300.090 3300.110 3300.120 Dimensions to fit enclosure type Packs of TS 8 TS 8 TS 8 TS 8 TS 8 TS 8 TS 8 TS 8 Page with height mm 1800 2000 1800 2000 1800 2000 1800 2000 with width mm 600 600 800 800 1200 1200 1200 1200 Unit positioned on the left – – – – ◾ ◾ – – Unit positioned on the right – – – – – – ◾ ◾ see page see page see page see page see page see page see page see page 350 3284.210 3284.210 3284.210 3284.210 3284.210 3284.210 3284.210 3284.210 370 Also required Modular climate control concept - Cooling module “Blue e” Accessories Metal filters Rittal Catalogue 34/Climate control 1 pc(s). 351 352 Rittal Catalogue 34/Climate control Cooling with water Air/water heat exchangers Wall-mounted .......................................................... 300 – 500 W ..............354 Wall-mounted ........................................................ 600 – 1000 W ..............355 Wall-mounted ...................................................... 1250 – 3000 W ..............356 Wall-mounted ...................................................... 3000 – 5000 W ..............357 Wall-mounted ..................................................................7000 W ..............358 Roof-mounted ..................................................... 1875 – 4000 W ..............359 Liquid Cooling Package LCP Rack Industry............................................................. 10 kW ..............360 Chillers TopTherm............................................................ 1000 – 1500 W ..............361 TopTherm............................................................ 3000 – 6000 W ..............362 TopTherm, wall-mounted..................................... 1000 – 2500 W ..............363 TopTherm.......................................................... 8000 – 16000 W ..............364 TopTherm........................................................ 20000 – 40000 W ..............365 Rittal Catalogue 34/Climate control 353 Air/water heat exchangers Climate control accessories Page 369 Chillers Page 361 Therm software Page 385 Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 55 Supply includes: – Fully wired ready for connection (plug-in terminal strip) – Drilling template – Sealing and assembly parts Note: – Integral non-return valve for version with e-Comfort controller Approvals: Available on the Internet Performance diagrams: Available on the Internet Technical details: Available on the Internet Cooling medium: – Water (see Internet for specifications) Output class 300 – 500 W, wall-mounted Model No. 3212.024 3212.115 3212.230 3363.100 3363.500 Copper/brass (Cu/CuZn) ◾ ◾ ◾ ◾ ◾ Basic controller (factory setting +35°C) – – – ◾ – e-Comfort controller (factory setting +35°C) – – – – ◾ Total cooling output L35 W10, 200 l/h kW 0.3 0.3 0.3 – – Total cooling output L35 W10, 400 l/h kW – – – 0.5 0.5 Water-carrying parts Temperature control Packs of Rated operating voltage V, ~, Hz 24 (DC) 115, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 Width mm 150 150 150 280 280 Height mm 300 300 300 550 550 Depth mm 85 85 85 120 120 Power consumption Pel 50/60 Hz W 26 26 / 30 23 / 27 37 / 38 37 / 38 Rated current max. A 1.2 0.23 / 0.24 0.11 / 0.13 0.18 / 0.18 0.18 / 0.18 2 2 2 4 4 +1°C...+70°C +1°C...+70°C +1°C...+70°C +1°C...+70°C +1°C...+70°C Pre-fuse A Operating temperature range Setting range – – – +20°C...+55°C +20°C...+55°C +1°C...+30°C +1°C...+30°C +1°C...+30°C +1°C...+30°C +1°C...+30°C ½" connector sleeve – – – ◾ ◾ G ⅜" external thread – – – ◾ ◾ ⅜" connector sleeve ◾ ◾ ◾ – – 1 - 10 1 - 10 1 - 10 1 - 10 1 - 10 Air throughput of fans (unimpeded air flow) m³/h 250 260 / 300 280 / 310 290 / 345 290 / 345 Weight kg 3.2 3.2 3.2 8.0 8.0 Water inlet temperature Water connection Permissible operating pressure (p. max.) bar Page Accessories Condensate hose 1 pc(s). 3301.610 3301.610 3301.610 3301.612 3301.612 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 4127.010 639 Toroidal transformer, primary connection 115 V/400 V 1 pc(s). – – 3201.960 see page see page 382 Fitting G ⅜" 2 pc(s). Flow regulator valve 377 – – – 3201.900 3201.900 378 see page see page see page see page see page 378 Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 3114.200 – – 379 SK BUS system 1 pc(s). – – – – 3124.100 382 Interface board 1 pc(s). – – – – 3124.200 381 354 Rittal Catalogue 34/Climate control Air/water heat exchangers Output class 600 – 1000 W, wall-mounted Model No. Water-carrying parts Temperature control 3214.100 3364.504 3364.100 3364.500 Copper/brass (Cu/CuZn) Packs of ◾ – ◾ ◾ Stainless steel (1.4571) – ◾ – – Basic controller (factory setting +35°C) – – ◾ – e-Comfort controller (factory setting +35°C) – ◾ – ◾ Thermostat-controlled magnetic valve ◾ – – – Total cooling output L35 W10, 200 l/h kW 0.6 – – – Total cooling output L35 W10, 400 l/h kW 0.7 0.95 1 1 Rated operating voltage V, ~, Hz 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 Width mm 200 280 280 280 Height mm 500 550 550 550 Depth mm 100 120 120 120 36 / 37 37 / 38 37 / 38 37 / 38 0.17 / 0.18 0.18 / 0.18 0.18 / 0.18 0.18 / 0.18 2 4 4 4 Operating temperature range +1°C...+70°C +1°C...+70°C +1°C...+70°C +1°C...+70°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Water inlet temperature +1°C...+30°C +1°C...+30°C +1°C...+30°C +1°C...+30°C ½" connector sleeve ◾ ◾ ◾ ◾ G ⅜" external thread – ◾ ◾ ◾ 1 - 10 1 - 10 1 - 10 1 - 10 280 / 310 290 / 345 290 / 345 290 / 345 7.0 9.0 9.0 9.0 Power consumption Pel 50/60 Hz W Rated current max. A Pre-fuse A Water connection Permissible operating pressure (p. max.) bar Air throughput of fans (unimpeded air flow) m³/h Weight kg Page Accessories Condensate hose 1 pc(s). 3301.612 3301.612 3301.612 3301.612 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 639 see page see page see page see page 382 Toroidal transformer, primary connection 115 V/400 V Fitting G ⅜" 2 pc(s). Flow regulator valve Digital enclosure internal temperature display and thermostat 377 – 3201.900 3201.900 3201.900 378 see page see page see page see page 378 – – – – 1 pc(s). – 3124.100 – 3124.100 382 Interface board 1 pc(s). – 3124.200 – 3124.200 381 Accessories SK BUS system Rittal Catalogue 34/Climate control Therm software see page 385 355 Air/water heat exchangers Output class 1250 – 3000 W, wall-mounted Model No. Water-carrying parts Temperature control 3215.100 3373.100 3373.500 3374.504 3374.100 Copper/brass (Cu/CuZn) Packs of ◾ ◾ ◾ – ◾ Stainless steel (1.4571) – – – ◾ – Basic controller (factory setting +35°C) – ◾ – – ◾ e-Comfort controller (factory setting +35°C) – – ◾ ◾ – Thermostat-controlled magnetic valve ◾ – – – – Total cooling output L35 W10, 200 l/h kW 1.25 – – – – Total cooling output L35 W10, 400 l/h kW 1.3 2 2 2.8 3 Rated operating voltage V, ~, Hz 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 Width mm 200 400 400 400 400 Height mm 950 950 950 950 950 Depth mm 100 145 145 145 145 83 / 85 110 / 140 110 / 140 169 / 232 169 / 232 0.38 / 0.4 0.49 / 0.61 0.49 / 0.61 0.76 / 1.01 0.76 / 1.01 4 4 4 4 4 Operating temperature range +1°C...+70°C +1°C...+70°C +1°C...+70°C +1°C...+70°C +1°C...+70°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Water inlet temperature +1°C...+30°C +1°C...+30°C +1°C...+30°C +1°C...+30°C +1°C...+30°C ½" connector sleeve ◾ ◾ ◾ ◾ ◾ G ⅜" external thread – ◾ ◾ ◾ ◾ 1 - 10 1 - 10 1 - 10 1 - 10 1 - 10 680 / 735 880 / 950 880 / 950 1150 / 1300 1150 / 1300 13.0 20.0 20.0 23.0 23.0 Power consumption Pel 50/60 Hz W Rated current max. A Pre-fuse A Water connection Permissible operating pressure (p. max.) bar Air throughput of fans (unimpeded air flow) m³/h Weight kg Page Accessories Condensate hose 1 pc(s). 3301.612 3301.612 3301.612 3301.612 3301.612 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 4127.010 639 see page – – – – 382 Toroidal transformer, primary connection 115 V/400 V Fitting G ⅜" 2 pc(s). Flow regulator valve Digital enclosure internal temperature display and thermostat 377 – 3201.900 3201.900 3201.900 3201.900 378 see page see page see page see page see page 378 – – – – – SK BUS system 1 pc(s). – – 3124.100 3124.100 – 382 Interface board 1 pc(s). – – 3124.200 3124.200 – 381 LCP – Liquid Cooling Package New see page 360 356 Rittal Catalogue 34/Climate control Air/water heat exchangers Output class 3000 – 5000 W, wall-mounted Model No. Water-carrying parts Temperature control 3374.500 3375.504 3375.100 3375.500 Copper/brass (Cu/CuZn) Packs of ◾ – ◾ ◾ Stainless steel (1.4571) – ◾ – – Basic controller (factory setting +35°C) – – ◾ – e-Comfort controller (factory setting +35°C) ◾ ◾ – ◾ Total cooling output L35 W10, 200 l/h W – – – – Total cooling output L35 W10, 400 l/h kW 3 4.5 5 5 230, 1~, 50/50 Rated operating voltage V, ~, Hz 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 Width mm 400 450 450 450 Height mm 950 1400 1400 1400 Depth mm 145 220 220 220 Power consumption Pel 50/60 Hz W 169 / 232 178 / 232 178 / 232 178 / 232 Rated current max. A 0.76 / 1.01 0.78 / 1.01 0.78 / 1.01 0.78 / 1.01 4 4 4 4 Operating temperature range +1°C...+70°C +1°C...+70°C +1°C...+70°C +1°C...+70°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Water inlet temperature +1°C...+30°C +1°C...+30°C +1°C...+30°C +1°C...+30°C ½" connector sleeve ◾ ◾ ◾ ◾ G ⅜" external thread ◾ ◾ ◾ ◾ 1 - 10 1 - 10 1 - 10 1 - 10 1150 / 1300 1490 / 1660 1490 / 1660 1490 / 1660 23.0 39.0 39.0 39.0 Pre-fuse A Water connection Permissible operating pressure (p. max.) bar Air throughput of fans (unimpeded air flow) m³/h Weight kg Page Accessories Condensate hose 1 pc(s). 3301.612 3301.612 3301.612 3301.612 377 Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 639 – – – – 3201.900 3201.900 3201.900 3201.900 378 see page see page see page see page 378 Toroidal transformer, primary connection 115 V/400 V Fitting G ⅜" 2 pc(s). Flow regulator valve Digital enclosure internal temperature display and thermostat – – – – SK BUS system 1 pc(s). 3124.100 3124.100 – 3124.100 382 Interface board 1 pc(s). 3124.200 3124.200 – 3124.200 381 Accessories TopTherm chillers Rittal Catalogue 34/Climate control see page 361 357 Air/water heat exchangers Climate control accessories Page 369 Chillers Page 361 Therm software Page 385 Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 55 Supply includes: – Fully wired ready for connection (plug-in terminal strip) – Drilling template – Sealing and assembly parts Note: – Use 3-pole miniature circuitbreaker Technical details: Available on the Internet Approvals: Available on the Internet Performance diagrams: Available on the Internet Cooling medium: – Water (see Internet for specifications) Output class 7000 W, wall-mounted Model No. Packs of 3216.480 Water-carrying parts Copper/brass (Cu/CuZn) ◾ Temperature control Thermostat-controlled magnetic valve ◾ Total cooling output L35 W10, 500 l/h kW 7 Total cooling output L35 W20, 500 l/h kW 4.5 Page 400, 3~, 50 460, 3~, 60 Rated operating voltage V, ~, Hz Width mm 450 Height mm 1800 Depth mm 300 Rated current max. A 1.4 / 1.6 Pre-fuse A 4 Operating temperature range +1°C...+70°C Setting range +20°C...+55°C Water inlet temperature +1°C...+30°C Permissible operating pressure (p. max.) bar 1 - 10 Air throughput of fans (unimpeded air flow) m³/h 3630 / 4670 Weight kg 79.0 Accessories Door-operated switch 1 pc(s). 4127.010 639 Condensate hose 1 pc(s). 3301.612 377 see page 378 Flow regulator valve 358 Rittal Catalogue 34/Climate control Air/water heat exchangers Climate control accessories Page 369 Chillers Page 361 Roof plates TS with mounting cut-out Page 383 Air routing Page 374 Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 55 Supply includes: – Fully wired ready for connection (plug-in terminal strip) – Drilling template – Sealing mat – Assembly parts Cooling medium: – Water (see Internet for specifications) Approvals: Available on the Internet Performance diagrams: Available on the Internet Technical details: Available on the Internet Output class 1875 – 4000 W, roof-mounted Model No. Water-carrying parts Temperature control 3209.504 3209.100 3209.500 3210.504 3210.100 3210.500 Copper/brass (Cu/CuZn) Packs of – ◾ ◾ – ◾ ◾ Stainless steel (1.4571) ◾ – – ◾ – – Basic controller (factory setting +35°C) – ◾ – – ◾ – e-Comfort controller (factory setting +35°C) Total cooling output L35 W10, 400 l/h kW Rated operating voltage V, ~, Hz ◾ – ◾ ◾ – ◾ 1.88 2.5 2.5 3 4 4 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 Width mm 597 597 597 597 597 597 Height mm 417 417 417 417 417 417 Depth mm 475 475 475 475 475 475 Power consumption Pel 50/60 Hz W 95 / 110 95 / 110 95 / 110 100 / 120 100 / 120 100 / 120 Rated current max. A 0.4 / 0.48 0.4 / 0.48 0.4 / 0.48 0.44 / 0.5 0.44 / 0.5 0.44 / 0.5 4 4 4 4 4 4 Operating temperature range +1°C...+70°C +1°C...+70°C +1°C...+70°C +1°C...+70°C +1°C...+70°C +1°C...+70°C Setting range +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C +20°C...+55°C Pre-fuse A Water inlet temperature Water connection Page +1°C...+30°C +1°C...+30°C +1°C...+30°C +1°C...+30°C +1°C...+30°C +1°C...+30°C ½" connector sleeve ◾ ◾ ◾ ◾ ◾ ◾ G ⅜" external thread ◾ ◾ ◾ ◾ ◾ ◾ 1 - 10 1 - 10 1 - 10 1 - 10 1 - 10 1 - 10 925 / 1030 925 / 1030 925 / 1030 815 / 925 815 / 925 815 / 925 23.5 23.5 23.5 25.5 25.5 25.5 Permissible operating pressure (p. max.) bar Air throughput of fans (unimpeded air flow) m³/h Weight kg Accessories Door-operated switch 1 pc(s). 4127.010 4127.010 4127.010 4127.010 4127.010 4127.010 639 SK BUS system 1 pc(s). 3124.100 – 3124.100 3124.100 – 3124.100 382 Interface board 1 pc(s). 3124.200 – 3124.200 3124.200 – 3124.200 381 Air duct system 1 pc(s). 3286.870 3286.870 3286.870 3286.870 3286.870 3286.870 374 Stoppers 2 pc(s). 3286.880 3286.880 3286.880 3286.880 3286.880 3286.880 376 Condensate hose 1 pc(s). 3301.612 3301.612 3301.612 3301.612 3301.612 3301.612 377 see page see page see page see page see page see page 378 Flow regulator valve Rittal Catalogue 34/Climate control 359 Liquid Cooling Package Climate control accessories Page 369 Chillers Page 361 Therm software Page 385 Air/water heat exchangers in TS 8 baying system, to fit 600 or 800 mm deep and 2000 mm high TS 8 enclosures. Air outlet either with 5 kW on each side or 10 kW on one side only. Options available for water connection on the top or bottom of the unit. Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 54 Cooling medium: – Water (see Internet for specifications) Supply includes: – Fully wired ready for connection (plug-in terminal strip) – Front door Note: – Bayable by screw-fastening at the sides Performance diagrams: Available on the Internet Photo shows a configuration example with equipment not included in the scope of supply Output class 10 kW, LCP Rack Industry Model No. Water-carrying parts Packs of Copper/brass (Cu/CuZn) Total cooling output L35 W10, 2000 l/h kW Power consumption Pel 50/60 Hz W Rated operating voltage V, ~, Hz 3378.200 3378.280 ◾ ◾ 10 10 704 / 816 704 / 816 230, 1~, 50/60 230, 1~, 50/60 Width mm 300 300 Height mm 2000 2000 Depth mm Rated current max. A Pre-fuse A 600 800 3 / 3.5 3 / 3.5 4 4 Operating temperature range +5°C...+70°C +5°C...+70°C Setting range +20°C...+55°C +20°C...+55°C Water inlet temperature +7°C...+30°C +7°C...+30°C ¾" connector sleeve ◾ ◾ ¾" internal thread ◾ ◾ 1 - 10 1 - 10 2120 / 1960 2120 / 1960 121.0 130.0 Water connection Permissible operating pressure (p. max.) bar Air throughput of fans (unimpeded air flow) m³/h Weight kg Page Accessories Base/plinth components, front and rear, 100 mm 1 set(s) 8601.915 8601.915 Base/plinth trim panels, side, 100 mm 1 set(s) 8601.060 8601.080 514 Base/plinth components, front and rear, 200 mm 1 set(s) 8602.915 8602.915 513 Base/plinth trim panels, side, 200 mm 1 set(s) 8602.060 8602.080 514 Side panels, screw-fastened, sheet steel 2 pc(s). 8106.235 8108.235 534 Condensate hose 1 pc(s). 3301.612 3301.612 377 360 513 Rittal Catalogue 34/Climate control TopTherm chillers Climate control accessories Page 369 Cooling medium Page 378 Flow regulator valve Page 378 Therm software Page 385 Design: – Compact, modular layout of the refrigeration components – Nano-coated condenser – Pump to convey the medium – Precise temperature control, based on microprocessor technology – Collective fault signal with floating contact Temperature control: – Microcontroller control (factory setting +20°C) Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 44 (electrics) Supply includes: – Complete unit ready for connection – Multilingual documentation including functional diagram and wiring plans Characteristic curves of pump: Available on the Internet Approvals: Available on the Internet Technical details: Available on the Internet Note: – For 3334.660, two metal filters are required Output class 1000 – 1500 W Model No. Packs of Total cooling output at Tw = 10°C / Tu = 32°C kW Total cooling output at Tw = 18°C / Tu = 32°C kW Power consumption Pel 50/60 Hz kW Rated operating voltage V, ~, Hz 3318.600 3318.610 3319.600 3319.610 0.8 / 0.9 0.8 / 0.9 1.2 / 1.3 1.2 / 1.3 1 / 1.1 1 / 1.1 1.5 / 1.7 1.5 / 1.7 0.63 / 0.78 0.63 / 0.78 0.85 / 1.05 0.85 / 1.05 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 230, 1~, 50/60 Width mm 600 600 600 600 Height mm 400 400 400 400 Depth mm 430 430 430 430 4.2 / 4.1 4.2 / 4.1 5.4 / 5.3 5.4 / 5.3 +10°C...+43°C +10°C...+43°C +10°C...+43°C +10°C...+43°C R134a R134a R134a R134a ◾ ◾ ◾ ◾ +/- 2 K +/- 2 K +/- 2 K +/- 2 K Temperature of liquid +10°C...+30°C +10°C...+30°C +10°C...+30°C +10°C...+30°C Design Pressure-sealed Open Pressure-sealed Open – PP plastic – PP plastic Rated current max. A Operating temperature range Refrigerant Water connection ½" internal thread Temperature hysteresis Tank Tank capacity l Weight kg – 2.5 – 2.5 48.0 48.0 51.0 51.0 3286.510 3286.510 3286.510 3286.510 Page Accessories Metal filters Rittal Catalogue 34/Climate control 1 pc(s). 370 361 TopTherm chillers Output class 3000 – 6000 W Model No. Packs of Total cooling output at Tw = 10°C / Tu = 32°C kW Total cooling output at Tw = 18°C / Tu = 32°C kW 3320.600 3334.600 3334.660 2.7 / 3 3.9 / 4.7 4.8 / 5.2 6.1 / 6.6 3 / 3.4 4.5 / 5.4 2.1 / 2.7 2.9 / 4.1 4.1 / 4.8 400, 3~, 50 460, 3~, 60 400, 3~, 50 460, 3~, 60 400, 3~, 50 460, 3~, 60 Width mm 602 602 602 Height mm 676 676 1050 Power consumption Pel 50/60 Hz kW Rated operating voltage V, ~, Hz Depth mm 645 645 645 4.1 / 4.4 5.7 / 6.3 8.4 / 9 +10°C...+43°C +10°C...+43°C +10°C...+43°C R134a R134a R134a – – ◾ ½" internal thread ◾ ◾ – ¾" internal thread – – ◾ Rated current max. A Operating temperature range Refrigerant Integral tank level display Water connection Temperature hysteresis Temperature of liquid Design Tank Tank capacity l Weight kg +/- 2 K +/- 2 K +/- 2 K +10°C...+30°C +10°C...+30°C +10°C...+30°C Open Open Open PP plastic PP plastic PP plastic 30 30 30 88.0 94.0 125.0 3286.520 3286.520 3286.510 Page Accessories Metal filters 1 pc(s). 370 LCP – Liquid Cooling Package New see page 429 362 Rittal Catalogue 34/Climate control TopTherm chillers Design: – Compact, modular layout of the refrigeration components – Nano-coated condenser – Pump to convey the medium – Precise temperature control, based on microprocessor technology – Open system with tank – Collective fault signal with floating contact Temperature control: – Microcontroller control (factory setting +20°C) Characteristic curves of pump: Available on the Internet Colour: – RAL 7035 Approvals: Available on the Internet Protection category IP to IEC 60 529: – IP 44 (electrics) Technical details: Available on the Internet Supply includes: – Complete unit ready for connection – Multilingual documentation including functional diagram and wiring plans H Climate control accessories Page 369 Cooling medium Page 378 Flow regulator valve Page 378 Therm software Page 385 B T Output class 1000 – 2500 W, wall-mounted Model No. Packs of Total cooling output at Tw = 10°C / Tu = 32°C kW Total cooling output at Tw = 18°C / Tu = 32°C kW Power consumption Pel 50/60 Hz kW Rated operating voltage V, ~, Hz 3360.100 3360.250 0.8 / 0.9 2.1 / 2.3 1 / 1.1 2.5 / 2.8 0.7 / 0.76 1.55 / 2 400, 3~, 50 460, 3~, 60 400, 3~, 50 460, 3~, 60 Width (B) mm 400 400 Height (H) mm 950 1580 Depth (T) mm Rated current max. A Operating temperature range Refrigerant Water connection Quick-release coupling (mating part included in accessory bag) Temperature hysteresis Temperature of liquid Tank Tank capacity l Weight kg 310 290 4.2 / 4 5.5 / 5.6 +10°C...+43°C +10°C...+43°C R134a R134a ◾ ◾ +/- 2 K +/- 2 K +10°C...+30°C +10°C...+30°C PP plastic PP plastic 5 10 47.0 78.0 3286.410 3286.410 Page Accessories Metal filters Rittal Catalogue 34/Climate control 1 pc(s). 370 363 TopTherm chillers Climate control accessories Page 369 Cooling medium Page 378 Flow regulator valve Page 378 Therm software Page 385 Benefits: – Modular design – Small footprint – Convenient servicing – High reliability thanks to icing protection – One version for two frequencies = international compatibility – Fast availability, because the basic platform is available off the shelf Temperature control: – Microcontroller control (factory setting +18°C, differential value control also available) Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 44 (electrics) Supply includes: – Fully wired unit ready for connection with side panels and door – Multilingual documentation including functional diagram and wiring plans Characteristic curves of pump: Available on the Internet Approvals: Available on the Internet Technical details: Available on the Internet Note: – For 3335.880 and 3335.890, two metal filters are required Output class 8000 – 16000 W Model No. Packs of Total cooling output at Tw = 10°C / Tu = 32°C kW Total cooling output at Tw = 18°C / Tu = 32°C kW 3335.790 3335.830 3335.840 3335.850 6.5 / 7.5 6.5 / 7.5 10.3 / 11.3 13.8 / 15.2 16 / 17.6 8 / 8.6 8 / 8.6 12 / 13.1 Power consumption Pel 50/60 Hz kW 4.37 / 5.21 4.37 / 5.21 6.6 / 7.76 7.3 / 9.2 Rated operating voltage V, ~, Hz 400, 3~, 50 460, 3~, 60 400, 3~, 50 460, 3~, 60 400, 3~, 50 460, 3~, 60 400, 3~, 50 460, 3~, 60 Width mm 805 805 805 805 Height mm 1700 2100 2140 2140 Depth mm Rated current max. A Operating temperature range Refrigerant Water connection 1" internal thread Temperature hysteresis Temperature of liquid Tank capacity l Weight kg 605 605 605 605 8.2 / 7.7 8.2 / 7.7 10 / 11.4 12.7 / 13.3 +10°C...+43°C +10°C...+43°C +10°C...+43°C +10°C...+43°C R410a R410a R410a R410a ◾ ◾ ◾ ◾ +/- 2 K +/- 2 K +/- 2 K +/- 2 K +10°C...+25°C +10°C...+25°C +10°C...+25°C +10°C...+25°C 75 75 75 75 248.0 248.0 282.0 282.0 Page Accessories Metal filters 1 pc(s). 3286.550 3286.550 3286.530 3286.530 370 Levelling feet 4 pc(s). 7493.100 7493.100 7493.100 7493.100 521 Flex-Block base/plinth system from page from page from page from page 510 Base/plinth TS from page from page from page from page 512 Cooling medium see page see page see page see page 378 364 Rittal Catalogue 34/Climate control TopTherm chillers Output class 20000 – 40000 W Model No. Packs of Total cooling output at Tw = 10°C / Tu = 32°C kW 3335.860 3335.870 3335.880 3335.890 16.6 / 18.7 20.8 / 23.8 27 / 30.4 32.5 / 37.5 Total cooling output at Tw = 18°C / Tu = 32°C kW 20 / 21.8 25 / 27.6 32 / 35.2 40 / 44 Power consumption Pel 50/60 Hz kW 9.2 / 12 11.4 / 13.9 14.95 / 17.6 17.91 / 23.1 400, 3~, 50 460, 3~, 60 400, 3~, 50 460, 3~, 60 400, 3~, 50 460, 3~, 60 400, 3~, 50 460, 3~, 60 Width mm 1205 1205 1605 2405 Height mm 2140 2140 2140 2140 Depth mm 605 605 605 605 20.1 / 17.3 22.8 / 23.8 26.3 / 26.7 38.4 / 32.7 +10°C...+43°C +10°C...+43°C +10°C...+43°C +10°C...+43°C R410a R410a R410a R410a 1" internal thread ◾ ◾ – – 1¼" internal thread – – ◾ ◾ Rated operating voltage V, ~, Hz Rated current max. A Operating temperature range Refrigerant Water connection Temperature hysteresis Temperature of liquid Tank capacity l Weight kg +/- 2 K +/- 2 K +/- 2 K +/- 2 K +10°C...+25°C +10°C...+25°C +10°C...+25°C +10°C...+25°C 150 150 75 150 360.0 374.0 511.0 646.0 Page Accessories Metal filters 1 pc(s). 3286.540 3286.540 3286.530 3286.540 Levelling feet 4 pc(s). 7493.100 7493.100 7493.100 7493.100 370 521 Flex-Block base/plinth system from page from page from page from page 510 Base/plinth TS from page from page from page from page 512 Cooling medium see page see page see page see page 378 LCP – Liquid Cooling Package New see page 360 Rittal Catalogue 34/Climate control 365 Enclosure heaters Climate control accessories Page 369 Therm software Page 385 Note: – For precise temperature control inside the enclosure, we recommend the enclosure internal thermostat or the digital enclosure internal temperature display and thermostat. – In order to prevent condensation on assemblies, a hygrostat is recommended to regulate heating. – In larger enclosures, even heat distribution is best achieved by installing several low-output heaters. – The installation of heaters is generally advisable, in order to prevent condensation. Approvals: – UR – cUR – CSA B Technical details: Available on the Internet H Supply includes: – PTC heater – Quick-connection terminal – Assembly parts T Continuous thermal output 10 – 150 W, without fan Model No. 3105.320 3105.330 3105.340 3105.350 3105.360 3105.370 Width (B) mm Packs of 3105.310 45 45 64 64 64 90 90 Height (H) mm 120 120 155 155 230 165 180 Depth (T) mm 46 46 56 56 56 75 75 8 - 10 18 - 20 23 - 30 49 - 50 63 - 75 86 - 100 130 - 150 Continuous thermal output at Tu = 10°C W Page 110 - 240, 110 - 240, 110 - 240, 110 - 240, 110 - 240, 110 - 240, 110 - 240, 1~, 50/60 1~, 50/60 1~, 50/60 1~, 50/60 1~, 50/60 1~, 50/50 1~, 50/60 Rated operating voltage V, ~, Hz Pre-fuse A 2 2 4 4 4 4 4 Accessories Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 379 Hygrostat 1 pc(s). 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 380 Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 379 Bottom-mounted adaptor 1 pc(s). 3110.200 3110.200 3110.200 3110.200 3110.200 3110.200 3110.200 380 366 Rittal Catalogue 34/Climate control Enclosure heaters Climate control accessories Page 369 Therm software Page 385 Note: – For precise temperature control inside the enclosure, we recommend the enclosure internal thermostat or the digital enclosure internal temperature display and thermostat. – In order to prevent condensation on assemblies, a hygrostat is recommended to regulate heating. – In larger enclosures, even heat distribution is best achieved by installing several low-output heaters. – The installation of heaters is generally advisable, in order to prevent condensation. Approvals: – UR – cUR – CSA B Technical details: Available on the Internet H Supply includes: – PTC heater – Fan – Quick-connection terminal – Assembly parts T Continuous thermal output 235 – 800 W, with fan Model No. 3105.410 3105.380 3105.420 3105.390 3105.430 3105.400 Width (B) mm Packs of 103 103 103 103 103 103 Height (H) mm 200 200 200 200 200 200 Depth (T) mm 103 103 103 103 103 103 235 / 250 250 / 265 355 / 400 400 / 415 710 / 800 800 / 870 Continuous thermal output at Tu = 10°C 50/60 Hz W Page 115, 1~, 50/ 230, 1~, 50/ 115, 1~, 50/ 230, 1~, 50/ 115, 1~, 50/ 230, 1~, 50/ 60 60 60 60 60 60 Rated operating voltage V, ~, Hz Pre-fuse A 4 4 6 6 10 6 Accessories Enclosure internal thermostat 1 pc(s). 3110.000 3110.000 3110.000 3110.000 3110.000 3110.000 379 Hygrostat 1 pc(s). 3118.000 3118.000 3118.000 3118.000 3118.000 3118.000 380 Digital enclosure internal temperature display and thermostat 1 pc(s). 3114.200 3114.200 3114.200 3114.200 3114.200 3114.200 379 Bottom-mounted adaptor 1 pc(s). 3110.200 3110.200 3110.200 3110.200 3110.200 3110.200 380 Rittal Catalogue 34/Climate control 367 368 Rittal Catalogue 34/Climate control Climate control accessories Filter technology Filter mats for tangential fans Made of chopped-fibre mat with a progressive structure. Temperature-resistant to 100°C, self-extinguishing category F1 to DIN 53 438. Dust-laden air side: Open structure. Clean-air side: Closed structure. Reliable filtering of virtually all types of dust from a particle size of 10 μm. Material: – Chemical fibres For tangential fans/front outlet grilles 2 U 3144.000/3145.000/3176.000 Filter mats for ◾ Cooling units ◾ Air/air heat exchangers W x H x D mm Packs of Model No. 425 x 85 x 8 5 pc(s). 3177.000 Material: – Open-celled polyurethane foam – Outstanding physical and mechanical properties – Temperature-resistant: from –40°C ... +80°C – Thickness: 10 mm Rittal cooling units are low-maintenance and are supplied without filter mats. Filter mats may be used for extreme conditions. For cooling units W x H x D mm Packs of Model No. 3302.300/3302.310 190 x 95 x 10 3 pc(s). 3286.110 3302. . . ./3303. . . ./3361. . . . 265 x 200 x 10 3 pc(s). 3286.300 3304. . . ./3305. . . ./3328. . . ./3329. . . ./3332. . . ./3366. . . . 344 x 268 x 10 3 pc(s). 3286.400 3273. . . ./3382. . . ./3383. . . ./3384. . . ./3385. . . ./3359. . . . 530 x 255 x 10 3 pc(s). 3286.500 3386. . . ./3387. . . . 720 x 300 x 10 3 pc(s). 3286.600 For air/air heat exchangers W x H x D mm Packs of Model No. 3126.100/3126.115 265 x 200 x 10 3 pc(s). 3286.300 3127.100/3127.115/3128.100/3128.115/3129.100/3129.115/ 3130.100/3130.115 344 x 268 x 10 3 pc(s). 3286.400 Rittal Catalogue 34/Climate control 369 Climate control accessories Filter technology Metal filter Particularly when cooling units are used in dusty and oily environments, it is advisable to use washable metal filters. If air or steam condenses on the metal surfaces, any particles present will adhere to the metal, and can easily be washed out with water or greasedissolving solvents. Note: – 2 metal filters are required for 3334.660, 3335.880 and 3335.890 For cooling units W x H x D mm Packs of Model No. 3302.300/3302.310 190 x 95 x 10 1 pc(s). 3286.120 3302.100/3302.110/3302.200/3303. . . ./3361. . . . 265 x 200 x 10 1 pc(s). 3286.310 3304. . . ./3305. . . ./3328. . . ./3329. . . ./3332. . . ./3366. . . . 344 x 268 x 10 1 pc(s). 3286.410 3273. . . ./3382. . . ./3383. . . ./3384. . . ./3385. . . ./3359. . . . 530 x 255 x 10 1 pc(s). 3286.510 3386. . . ./3387. . . . 720 x 300 x 10 1 pc(s). 3286.610 For climate control door/section door W x H x D mm Packs of Model No. 3300.040/3300.050/3300.060/3300.070/3300.080/3300.090/ 3300.110/3300.120 425 x 78 x 10 1 pc(s). 3284.210 For air/air heat exchangers W x H x D mm Packs of Model No. 3126.100/3126.115 265 x 200 x 10 1 pc(s). 3286.310 3127.100/3127.115/3128.100/3128.115/3129.100/3129.115/ 3130.100/3130.115 344 x 268 x 10 1 pc(s). 3286.410 For chillers W x H x D mm Packs of Model No. 3318.600/3318.610/3319.600/3319.610/3334.660 530 x 255 x 10 1 pc(s). 3286.510 3320.600/3334.600 500 x 558 x 8 1 pc(s). 3286.520 3335.790/3335.830 600 x 800 x 20 1 pc(s). 3286.550 3335.840/3335.850/3335.880 600 x 1050 x 20 1 pc(s). 3286.530 3335.860/3335.870/3335.890 1000 x 1035 x 20 1 pc(s). 3286.540 344 x 268 x 10 1 pc(s). 3286.410 3360.100/.250 370 Material: – Aluminium – Thickness: 10 mm Rittal Catalogue 34/Climate control Climate control accessories Filter technology Spare filter mats Made of chopped-fibre mat with a progressive structure. Temperature resistant to +100°C Self-extinguishing category F1 to DIN 53 438. Dust-laden air side: Open structure. Clean-air side: Closed structure. Reliable filtering of virtually all types of dust from a particle size of 10 μm. For thermoelectric coolers 3201.200/3201.300 For fan-and-filter units Material W x H x D mm Filter class to DIN EN 779 Packs of Model No. Chemical fibres 90 x 106 x 8 G2 5 pc(s). 3201.050 Material W x H x D mm Filter class to DIN EN 779 Packs of Model No. 5 pc(s). 3321.700 50 pc(s). 3321.705 5 pc(s). 3322.700 50 pc(s). 3322.705 5 pc(s). 3171.100 50 pc(s). 3171.105 5 pc(s). 3172.100 50 pc(s). 3172.105 5 pc(s). 3173.100 50 pc(s). 3173.105 89 x 89 (8-sided) x 10 3237. . . . 3238. . . . 3239. . . . 120 x 120 x 12 Chemical fibres 3240. . . ./3241. . . . 173 x 173 x 17 221 x 221 x 17 3243. . . ./3244. . . ./3245. . . . G2 G2 G3 G3 289 x 289 x 17 G3 Material W x H x D mm Filter class to DIN EN 779 Packs of Model No. Chemical fibres 338 x 242 x 17 G2 3 pc(s). 3174.000 Material W x H x D mm Filter class to DIN EN 779 Packs of Model No. 3237. . . . 92 x 92 x 10 G2 5 pc(s). 3237.066 3238. . . . 125 x 125 x 12 G2 5 pc(s). 3238.066 178 x 178 x 17 G3 5 pc(s). 3239.066 226 x 226 x 17 G3 5 pc(s). 3240.066 294 x 294 x 17 G3 5 pc(s). 3243.066 For filter holders 3175.000 For EMC fan-and-filter units 3239. . . . 3240. . . ./3241. . . . 3243. . . ./3244. . . ./3245. . . . Copper-nickelchrome-coated chemical fibres Fine filter mats for fan-and-filter units Made of chopped-fibre mat with a progressive structure. Temperature resistant to +100°C Self-extinguishing category F1 to DIN 53 438. Dust-laden air side: Open structure. Clean-air side: Closed structure. Reliable filtering of virtually all types of dust from a particle size of 10 μm. Material: – Chemical fibres For fan-and-filter units W x H x D mm Filter class to DIN EN 779 Packs of Model No. 3238. . . . 120 x 120 x 12 F5/M5 5 pc(s). 3238.055 3239. . . . 173 x 173 x 12 F5/M5 5 pc(s). 3181.100 3240. . . ./3241. . . . 221 x 221 x 12 F5/M5 5 pc(s). 3182.100 3243. . . ./3244. . . ./3245. . . . 289 x 289 x 12 F5/M5 5 pc(s). 3183.100 Rittal Catalogue 34/Climate control 371 Climate control accessories Filter technology Outlet filter For ventilation by convection, an outlet filter can be installed in the upper and lower sections of the enclosure. Model No. Dimensions W x H x D mm Standard EMC 116.5 x 116.5 x 16 3237.200 3237.060 148.5 x 148.5 x 24 3238.200 3238.060 Material: – ABS, material resistance to UL 94-5VA 204 x 204 x 24 3239.200 3239.060 255 x 255 x 25 3240.200 3240.060 Colour: – RAL 7035 323 x 323 x 25 3243.200 3243.060 Protection category IP to IEC 60 529: – IP 54 including filter mat Supply includes: – Complete unit ready to install, including filter mat Hose-proof hood Accessories: – – – – Spare filter mats, see page 371 Fine filter mats, see page 371 Hose-proof hood, see page 372 Blanking cover, see page 372 Dimensions mm Model No. 3237. . . . 150 x 230 x 40 3237.080 3238. . . . 176 x 245 x 55 3238.080 Material: – Stainless steel – Silicone 3239. . . . 233 x 330 x 55 3239.080 3240. . . ./3241. . . . 282 x 390 x 85 3240.080 3243. . . ./3244. . . . 350 x 480 x 110 3243.080 Protection category IP to IEC 60 529: – IP 56 when fitted over fan-and-filter unit/outlet filter with filter mat 3245. . . . 350 x 480 x 160 3245.080 to increase the protection category Easy cleaning thanks to exterior silicone coating approved for use with foodstuffs. For fan-and-filter units/ outlet filters NEMA protection category: – NEMA Type 12 for 3237.080 – NEMA Type 1, 12, 3, 4, 4X for 3238.080, 3239.080, 3240.080, 3243.080 – NEMA Type 1, 12, 3R for 3245.080 Blanking cover If existing mounting cut-outs for fan-and-filter units/ outlet filters need to be closed to achieve a higher protection category, the filter mat of the fan-andfilter unit/outlet filter can simply be replaced with a blanking cover; welding or other mechanical modification of the enclosure is not necessary. For fan-and-filter units/ outlet filters Packs of Model No. 3237. . . . 2 pc(s). 3237.020 3238. . . . 2 pc(s). 3238.020 3239. . . . 2 pc(s). 3239.020 3240. . . ./3241. . . . 2 pc(s). 3240.020 3243. . . ./3244. . . ./3245. . . . 2 pc(s). 3243.020 Material: – Closed-cell polythene foam Colour: – Anthracite Protection category IP to IEC 60 529: – IP 54 372 Front outlet grille 2 U Packs of Model No. for tangential fans This front outlet grille is required if a 482.6 mm (19˝) cross-flow blower 3144.000/3145.000 is used in the lower section of the electronic enclosure and the hot air is to be expelled to the outside from the upper section of the enclosure. The design of the grille matches that of the intake grille in the cross-flow blower. These grilles can also be used as simple inflow and outflow grilles with natural convection. 1 pc(s). 3176.000 Accessories: – Filter mat, see page 369 Rittal Catalogue 34/Climate control Climate control accessories Filter technology Filter holder W x H x D mm Model No. for roof ventilation The use of a filter mat is required in order to increase the protection category of the roof vent 3148.007. 340 x 244 x 15 3175.000 Material: – Sheet steel Accessories: – Spare filter mat, see page 371 Protection category IP to IEC 60 529: – IP 44 Supply includes: – Filter holder including filter mat Enclosure internal fans for TS To prevent hot-spots and support the air routing of active enclosure climate control components. Adjustable in two axes. Attached to the TS 8 frame section. Several fans may be cascaded using the quick-release clamping strip. Supply includes: – Complete unit with radial fan ready for connection – Snap-on pivot device – Assembly parts Air throughput (unimpeded airflow) m3/h Rated output W Rated current A Rated voltage Model No. V, ~, Hz 160 19.0/18.0 0.12/0.11 230, 1~, 50/60 3108.100 160 19.0/18.0 0.24/0.23 115, 1~, 50/60 3108.115 160 3.5 0.15 24 V (DC) 3108.024 Technical details: Available on the Internet Mini-fan Compact DC fan for enclosure and component cooling in enclosures. Technical specifications: – Rated operating voltage: 24 V (DC) – Power consumption: 1 W – Air throughput (unimpeded air flow): 21 m3/h – Noise level (unimpeded air flow): 20 dB (A) – Operating temperature range: –20°C…+70°C Dimensions W x H x D mm Packs of Model No. 60 x 60 x 25.4 1 pc(s). 3236.124 Supply includes: – Fan – Assembly screws – Contact hazard protection grille (2 pc(s).) Integrated louvres W x H x D mm Packs of Model No. For ventilation by convection; easily retro-fitted using 4 screws. 160 x 110 x 8 4 pc(s). 2541.235 210 x 100 x 8 4 pc(s). 2542.235 Material: – Sheet steel 330 x 110 x 8 4 pc(s). 2543.235 Colour: – RAL 7035 Technical details: Available on the Internet Supply includes: – Assembly parts B Rittal Catalogue 34/Climate control H T 373 Climate control accessories Air routing Air duct system for roof-mounted cooling units and air/water heat exchangers Cold air can be routed directly to specific areas of the enclosure using the air duct system. The risk of air short circuits due to self-ventilated installed devices is therefore eliminated. The flat duct has dimensions of W x H x D 229 x 1500 x 29 mm, and may be shortened to the required length. Material: – Flame-resistant plastic to DIN 4102/B1 Colour: – RAL 7035 Supply includes: – Flat duct, compensating hose Note: – Do not direct cold air straight at active components. – When using the ducting system, the performance of the cooling unit may be reduced, depending on the respective application. Also required: – TS support strips, see page 609 – Air duct adaptor 3286.840 (for units 3359. . . ./3382. . . .), see page 374 Accessories: – Deflector 90°, see page 374 – Stopper, see page 376 – Flat duct extension, see page 375 For unit Packs of Model No. 3209. . . ./3210. . . ./3273. . . ./3359. . . ./3382. . . ./3383. . . ./3384. . . ./3385. . . . 1 pc(s). 3286.870 3386. . . ./3387. . . . 1 pc(s). 3286.970 Air duct adaptor Packs of Model No. for air duct system and flat air duct system An adaptor that allows connection of the spigot from which air is supplied by the cooling unit to the air duct system. To fit roof-mounted cooling units 3359.XXX, 3382.XXX. 1 pc(s). 3286.840 Deflector, 90° Packs of Model No. for air duct system For targeted air deflection at the end of the flat duct. 1 pc(s). 3286.990 Material: – ABS Colour: – RAL 9005 Colour: – RAL 7035 374 Rittal Catalogue 34/Climate control Climate control accessories Air routing Flat air duct system for roof-mounted cooling units and air/water heat exchangers, to fit TS 8 enclosures from a width of 800 mm and a depth of 600 mm Cold air may be routed directly to specific areas of the enclosure using the air duct system. The risk of air short circuits due to self-ventilated installed devices is therefore eliminated. The flat duct has dimensions of W x H x D 229 x 1500 x 29 mm, and may be shortened to the required length. Material: – Flame-resistant plastic to DIN 4102/B1 Colour: – RAL 7035 Supply includes: – Flat duct – Adaptor – Compensating piece – Deflector, 90° Note: – Do not direct cold air straight at active components – When using the ducting system, the performance of the heat exchanger may be reduced, depending on the respective application – Not to be used in conjunction with quick-change frame, see page 384 Also required: – TS support strips, see page 609 Accessories: – Deflector 90°, see page 374 – Stopper, see page 376 – Flat duct extension, see page 375 For unit Packs of Model No. 3209. . . ./3210. . . ./3273. . . ./3383. . . ./3384. . . ./3385. . . . 1 pc(s). 3286.850 Flat duct extension Packs of Model No. Extension kit for air duct system and flat air duct system for width, depth or height length extensions in TS 8 enclosures. 1 pc(s). 3286.860 Material: – Flame-resistant plastic to DIN 4102/B1 Rittal Catalogue 34/Climate control Supply includes: – Flat duct 1500 mm – Connecting piece 375 Climate control accessories Air routing Stoppers Material: – Polyurethane foam for roof-mounted cooling units and air/water heat exchangers To cover any cold air outlets that are not required. Diameter mm Max. no. of stoppers per unit Packs of 3359. . . ./3382. . . . 80 1 2 pc(s). 3286.780 3209. . . ./3210. . . ./3273. . . ./ 3383. . . ./3384. . . ./3385. . . . 100 2 2 pc(s). 3286.880 3386. . . ./3387. . . . 150 1 2 pc(s). 3286.980 For units Model No. Max. 2 x Max. 1 x 3359. . . ./3382. . . ./ 3386. . . ./3387. . . . 3209. . . ./3210. . . . /3383. . . ./ 3384. . . . 3385. . . ./3273. . . . Air diverter For units For use with wall-mounted cooling units, for targeted routing of cold air in a downward direction. Particularly well-suited for densely-packed electrical components in the lower section of the enclosure. 3304. . . ./3305. . . . Material: – Sheet steel Colour: – RAL 7035 Model No. 3213.310 3328. . . ./3329. . . . 3213.320 3213.3301) 3332. . . . Air circuit, external Air circuit, internal 65 1) 1) 115 376 mm for 3213.330 Rittal Catalogue 34/Climate control Climate control accessories Water distribution Electric condensate evaporator For external mounting on enclosures. For use with all cooling units and air/water heat exchangers (wall-mounted). Suitable for international use thanks to multi-voltage support. Evaporation performance: – at 230 V: 3.5 l/d – at 115 V: 3.0 l/d Width mm Rated operating voltage V, ~, Hz Model No. 280 115 – 230, 1~, 50/60 3301.500 400 115 – 230, 1~, 50/60 3301.505 Technical details: Available on the Internet Colour: – RAL 7035 Supply includes: – Electric condensate evaporator, ready to connect Condensate collecting bottle Packs of Model No. For mounting on the enclosure. For use with all enclosure cooling units and air/water heat exchangers. ◾ Safety overflow at the side ◾ Capacity approximately 0.75 l 1 pc(s). 3301.600 2 3 239 Supply includes: – Condensate collecting bottle – Bottle holder – Assembly parts 66 Condensate discharge hose Membrane grommet Max. 70 mm 1 Ø 73 Condensate hose For discharging and transporting condensate. For connection to cooling units and air/water heat exchangers. Material: – PVC, transparent For units Hose length m Material thickness Ø mm Model No. 3201. . . . 5 6x1 3301.606 3302. . . . 10 8 x 1.5 3301.608 3212. . . ./3303. . . ./3361. . . . 10 10 x 1.5 3301.610 3209. . . ./ 3210. . . ./3214.100/3215.100/3216.480/3273. . . ./ 3304. . . ./3305. . . ./3328. . . ./3329. . . ./3332. . . ./3359. . . ./ 3363. . . ./3364. . . ./3366. . . ./3373. . . ./3374. . . ./3375. . . ./ 3377. . . ./3378. . . ./3382. . . ./3383. . . ./3384. . . ./3385. . . ./ 3386. . . ./3387. . . . 10 12 x 2 3301.612 Rittal Catalogue 34/Climate control 377 Climate control accessories Water distribution Flow regulator valve For use with air/water heat exchangers, particularly if more than one heat exchanger (n > 1) is used in the cooling water circuit. The correctly set valve then ensures the same quantity of cooling medium for all equipment. The valve is used for hydraulic balancing. Design Packs of Model No. ¾˝ x ½˝ for volumetric flow control 1 pc(s). 3301.930 ¾˝ x ¾˝ for volumetric flow control 1 pc(s). 3301.940 Setting range: – 3 to 12 l/min Material: – Brass Fitting G⅜˝ Provides a G⅜˝ internal thread for connecting fixed pipework on air/water heat exchangers on the inlet and return. Material: – Brass Cooling medium for chillers Ready mix Apart from chillers for oil and emulsion, all other chillers are only suitable for the cooling of water or a water/glycol mixture. As well as protecting against frost, this cooling medium also serves to inhibit bacterial growth and provide optimum corrosion protection. For air/water heat exchanger Packs Model No. of Design 3209. . . ./3210. . . ./ G⅜˝ 3363. . . ./3364. . . ./ 2 pc(s). 3201.900 3373. . . ./3374. . . ./ internal thread 3375. . . . Cooling medium Antifreeze/ water mixture Outdoor 1:2 Standard 1:4 Container l Model No. 10 3301.950 25 3301.955 10 3301.960 25 3301.965 Supply includes: – 10 l canister – 25 l canister 378 Rittal Catalogue 34/Climate control Climate control accessories Control/regulation Digital enclosure internal temperature display and thermostat Packs of Model No. 1 pc(s). 3114.200 For installation in the enclosure door or wall. Technical specifications: – 2 voltage ranges for 100 – 230 V, 50/60 Hz and 24 – 60 V (DC) – Depth: 100 mm – Three-digit, 7-segment display – Option of switching between °C/°F – Temperature range: +5°C…+55°C – Includes 1800 mm long NTC sensor – Two relay outputs as change-over contact and normally open contact (max. contact load 230 V, 6 A) – Freely selectable switching hysteresis – The freely adjustable setpoint values can be set using the membrane keyboard at the front, setting range: +5°C…+55°C – Display and switching accuracy ±2 K – The minimum and maximum recorded temperatures are stored until it is next reset Digital enclosure internal temperature display and thermostat Integrated into a patch panel 1 U Including cable attachment for connection cable and label holder. Colour: – RAL 7035 Packs of Model No. 1 pc(s). 7109.035 Colour: – RAL 7035 Technical specifications: – 2 voltage ranges for 100 – 230 V, 50/60 Hz and 24 – 60 V (DC) – Depth: 100 mm – Three-digit, 7-segment display – Option of switching between °C/°F – Temperature range: +5°C…+55°C – Includes 1800 mm long NTC sensor – Two relay outputs as change-over contact and normally open contact (max. contact load 230 V, 6 A) – Freely selectable switching hysteresis – The freely adjustable setpoint values can be set using the membrane keyboard at the front, setting range: +5°C…+55°C – Display and switching accuracy ±2 K – The minimum and maximum recorded temperatures are stored until it is next reset Enclosure internal thermostat Particularly suitable for controlling fan-and-filter units, heaters and heat exchangers, this thermostat can also be used as a signal generator for monitoring the enclosure internal temperature. Technical specifications: – Bi-metal controller as a temperature-sensitive element with thermal feedback – Contact population: Single-pole change-over contact as a quick-break contact – Permissible contact load: Category 5 – 3 (heating) AC 10 (4)1) A, DC = max. 30 W Category 5 – 4 (cooling) AC 5 (4)1) A, DC = max. 30 W 1) = Inductive load at cos φ = 0.6 – Setting range: +5°C…+60°C – Weight: approx. 105 g – Dimensions: 71 x 71 x 33.5 mm – Switching hysteresis: approx. 1 K ± 0.8 K Rittal Catalogue 34/Climate control Rated operating voltage V, ~ 230, 115, 1~, 60, 48, 24 60/48/24 (DC) Model No. 3110.000 – Flexible mounting on a vertical or horizontal 35 mm support rail to EN 50 022, and snapfastening in the TS/SE enclosure section or on the mounting plate using the supplied adaptor Colour: – RAL 7035 Accessories: – Mounting plate TS with integral top-hat rail, see page 617 – Bottom-mounted adaptor, see page 380 379 Climate control accessories Control/regulation Hygrostat The hygrostat switches on the heater and/or fan when a preset relative humidity in the enclosure is exceeded. In this way, the relative humidity is reduced and condensation on assemblies or electronic components is avoided. Technical specifications: – Contact population: Single-pole change-over contact as a quick-break contact – Permissible contact load: AC ~ 5 (0,2)1) A DC = max. 20 W 1) = Inductive load at cos φ = 0.6 – Setting range: 50 – 100 % relative humidity – Weight: approx. 100 g – Dimensions: 71 x 71 x 33.5 mm – Switching hysteresis: approx. 4% Rated operating voltage V, ~ Model No. 24 – 230, 1~ 12 – 75 (DC) 3118.000 – Flexible mounting on a vertical or horizontal 35 mm support rail to EN 50 022, and snap fastening in the TS/SE enclosure section or on the mounting plate using the supplied adaptor. Colour: – RAL 7035 Accessories: – Mounting plate TS with integral top-hat rail, see page 617 – Bottom-mounted adaptor, see page 380 Bottom-mounted adaptor Packs of Model No. for enclosure internal thermostat 3110.000 and hygrostat 3118.000 Bottom-mounted adaptor with mounting option for screwed cable glands, for targeted cable infeed from appropriate equipment such as fan-and-filter units and enclosure heaters. In conjunction with screwed cable glands, it is also provides strain relief. 1 pc(s). 3110.200 Colour: – RAL 7035 380 Speed control EC For EC fan-and-filter units Control unit Temperature-dependent speed control for EC fanand-filter units to reduce noise and save energy. The status of the fan can also be monitored. ◾ Activation and monitoring of up to 4 EC fan-andfilter units (caution: EC fan-and-filter units cannot be controlled with speed control 3120.200!) ◾ Rated operating voltage: 100 – 250 V ◾ Top-hat rail assembly ◾ Temperature setting range: +5°C…+55°C/ 41°F…131°F ◾ External temperature sensor to record the ACTUAL temperature ◾ Status LED to display the operating status ◾ Alarm relay for reporting overtemperature, fan defect, cable interruption and sensor failure 3240.500/3241.500/3243.500/ 3244.500/3245.XXX Model No. 3235.440 Supply includes: – NTC sensor, length 1.80 m Rittal Catalogue 34/Climate control Climate control accessories Control/regulation Speed control EC For EC fan-and-filter units Sensor for speed control NTC sensor for temperature-dependent speed control of EC fan-and-filter units to reduce noise and save energy. Activated via an EC fan-and-filter unit. 3240.500/3241.500/3243.500/ 3244.500/3245.XXX Technical specifications: – Rated voltage: 10 – 12 V (DC) (supplied via EC fan-and-filter unit) – Intake current: 1 mA – Output current: 0.1 mA – Operating temperature range: –25°C…+80°C – Cable length: 3 m – Control characteristic: fixed setpoint at 35°C, with linear control range between +35°C (maximum speed 100%) and +20°C (minimum speed 10%) Model No. 3235.450 Protection category IP to IEC 60 529: – IP 40 Supply includes: – Sensor and cable (length 3 m) Speed control Packs of Model No. Temperature-dependent speed control for fan-andfilter units, air/air heat exchangers, rack-mounted fans and tangential fans to reduce noise and save energy in part-load operation. 1 pc(s). 3120.200 Technical specifications: – For mounting on a 35 mm support rail DIN EN 50 022 – Dimensions (W x H x D): 105 x 90.5 x 60.2 mm – Rated operating voltage: 100 – 230 V (AC) – Setting range: +20°C…+55°C – Phase cross-over with microcontroller – Maximum fan output 300 W or 2 A Supply includes: – Speed control – NTC sensor, length 1.80 m Note: – Only suitable for use with single-phase AC motors and equipment – Not suitable for EC motors Accessories: – Mounting plate TS with integral top-hat rail, see page 617 Interface board Packs of Model No. for equipment with e-Comfort controller The interface board is an extension for equipment with e-Comfort controller. In this way it is possible, e.g. to monitor a master/slave combination of up to 10 cooling units. Control is achieved via standardised interfaces: RS232 (DB9) or RS485, one PLC interface (DB9). The extension board is built into a 1 U plastic housing. A voltage supply of 24 V (DC) is required. This can be provided externally using a Kycon connector. 1 pc(s). 3124.200 Rittal Catalogue 34/Climate control Supply includes: – Interface board integrated into a plastic box W x H x D (mm): 136 x 44 (1 U) x 129 – Serial SUB-D cable, 1.5 m Technical details: Available on the Internet 381 Climate control accessories Control/regulation SK BUS system 35C 25C 20C 30C 40C 20C 35C Master-slave cable The SK Bus system allows several cooling units and air/water heat exchangers with e-Comfort controller to communicate with one another using a master/ slave protocol, providing optimum operating conditions in complex bayed enclosure systems. Technical specifications: – The master-slave configuration facilitates common activation and deactivation via door limit switches, parallel activation and deactivation via a temperature setpoint, and common collective fault signals and temperature logging, eliminating the need for intricate wiring. SK BUS system Master/slave adaptor Parallel operation of up to 5 thermoelectric coolers to increase cooling output or for redundant use. Supply includes: – Adaptor including connection cable to master – Assembly parts Toroidal transformer Primary connection 115 V/400 V Technical specifications: – Output 110 VA – Primary connection 3500 mm long – Secondary connection 1500 mm long – Dimensions W x H x D: 105 x 123 x 55 mm – For mounting on a 35 mm support rail EN 50 022 – Voltage tolerance ±10% Supply includes: – Assembly parts for top-hat rail mounting 382 For cooling units and air/ water heat exchangers Model No. 3124.100 Supply includes: – 3 m shielded interface cable – Operating instructions for programming the cooling units Note: – nB = nK – 1 – nB: Number of order units (SK bus system) – nK: Number of cooling units to be linked Technical details: Available on the Internet For thermoelectric cooler Model No. 3201.200/3201.300 3201.070 Also required: – CAN bus connection cable, 1 x RJ 45 per slave, see page 457 For air/water heat exchanger Primary connection V, 1~, Hz Secondary connection V, 1~, Hz Model No. 3363.X0X 3364.X0X 3214.100 3215.100 115, 1~, 50/60 230, 1~, 50/60 3201.970 3363.X0X 3364.X0X 3212.230 3214.100 3215.100 400, 2~, 50/60 230, 1~, 50/60 3201.960 Rittal Catalogue 34/Climate control Climate control accessories Mounting Roof plates TS For mounting: ◾ Roof-mounted cooling units ◾ Roof-mounted air/water heat exchangers ◾ Roof-mounted fan ◾ Vent attachment TS The cut-out in the roof plate is such that the roofmounted equipment is positioned centrally on the enclosure. 800 x 600 600 x 600 For mounting 3382. . . ./3359. . . ./ 3149.4. ./3149.8 . . Colour: – RAL 7035 Supply includes: – Assembly parts B1 mm B2 mm T1 mm T2 mm T3 mm Model No. 767.5 475 567.5 260 129.3 8801.320 = B2 567.5 490 567.5 390 61.3 8801.3101) 767.5 490 567.5 390 61.3 8801.330 567.5 390 61.3 8801.350 567.5 392 57.8 8801.3402) 1200 x 600 3209. . . ./3383. . . ./ 3210. . . ./3384. . . ./ 3273. . . ./3385. . . ./ 8801.380 1167.5 490 800 x 600 3386. . . ./3387. . . . 767.5 692 800 x 600 T3 13 For enclosures W x D mm Material: – Sheet steel B1 T2 = T1 1) When installing the roof-mounted equipment, it may interfere with the eyebolts of the enclosure; for this reason, roof fastening screws are supplied loose with the roof plates 2) Attachment is from the inside using metal brackets and retaining clamps Vent attachment TS For passive ventilation with labyrinthine air flow routing, to match the roofs for roof-mounted cooling units. For roof plates with cut-out mm Model No. 490 x 390 8801.380 Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 43 37.5 Supply includes: – Assembly parts 56 4 Trim frame For cooling unit for slimline cooling units Slimline cooling units can be internally or externally mounted on an enclosure door or wall. The trim frame presents a closed front for the cooling unit. 3366. . . . 4 46 Model No. 3377.000 Colour: – RAL 7035 140 Material: – Sheet steel Supply includes: – Trim frame – Sealing and assembly parts Rittal Catalogue 34/Climate control 383 Climate control accessories Mounting Quick-change frame For roof-mounted cooling units for roof-mounted cooling units The quick-change frame is more than just an alternate frame. Together with the seal, the lower part of the frame is screw-fastened to the enclosure. In this way, it is possible to install and remove the connector-ready cooling unit with the upper part of the alternate frame previously mounted on the cooling unit with quick-release fasteners. During servicing work, this means shorter assembly times and hence minimised downtime. What is more, the quickchange frame offers effective protection against the ingress of oil into the enclosure in oily atmospheres, thanks to its integral drainage trough. 3359. . . ./3382. . . . 3286.700 3209. . . ./3210. . . ./3383. . . ./ 3384. . . ./3385. . . . 3286.800 3386. . . . /3387. . . . 3286.900 Model No. Material: – Sheet steel Colour: – RAL 7035 Supply includes: – Quick-change frame – Seal – Quick-release fasteners Guide frame for Vario rack-mounted fan Supply includes: – Connector and fitted connection cable (3 m) – Mounting bracket for optional attachment to the 482.6 mm (19˝) system – Assembly parts 384 For Vario rack-mounted fan Model No. 3350.230/3351.230/3352.230 3355.100 3352.500 3357.100 Rittal Catalogue 34/Climate control Climate control accessories Project planning/monitoring Therm software Packs of Model No. The Therm software package takes care of the complex calculation of climate control requirements. A user-friendly interface guides the operator to the most suitable, correctly dimensioned climate control component. All evaluations are closely based on the requirements of IEC/TR 60 890 AMD 1/02.95 and DIN 3168 for cooling units. 1 pc(s). 3121.000 Therm is a calculation program for enclosure climate control ◾ Improved user prompting via tabs and simple selection menus ◾ Express and expert versions ◾ Configurator for recooling systems ◾ Heat loss calculator ◾ Internet updates ◾ Fast and thorough determination of the climate control requirements ◾ Easy calculation of the required actual cooling output, as well as any upgrades or enhancements to the switchgear ◾ Documentation is supplied with the calculation Supply includes: – CD-ROM, 19 languages Note: – A quick version of the Therm software is available as a free App Note: Your free 30-day trial version may be downloaded at www.rittal.com RiDiag II Packs of Model No. For the diagnosis, maintenance and long-term data capture of TopTherm units with e-Comfort controller. RiDiag logs equipment data and prepares an error list. RiDiag also offers the option of displaying and setting the device’s operating parameters. The logging of measurement data can be tracked in real time in the form of a diagram. 1 pc(s). 3159.100 Supply includes: – CD-ROM, 6 languages – Connection cable Rittal Catalogue 34/Climate control 385 386 Rittal Catalogue 34/IT infrastructure IT infrastructure RiMatrix S Standard room ...........................................................................................400 Standard security room ..............................................................................401 Standard container .....................................................................................402 IT enclosure systems TS-IT with vented door for room climate control ...........................................90 TS-IT with glazed door for rack climate control .............................................92 TS-IT with glazed door for rack climate control, pre-configured ....................94 TS-IT with glazed door for rack climate control, IP 55 ...................................95 Data Rack distributor frame ..........................................................................96 IT enclosures VerticalBox ...................................................................................................97 FlatBox .........................................................................................................98 Wall-mounted enclosure EL, 3-part, pre-configured with mounting angles..................................................................................100 Wall-mounted enclosure EL, 3-part, pre-configured with punched rails and mounting angles .....................................................101 Wall-mounted enclosure EL, 3-part, with mounting plate and mounting angles ..................................................................................102 Wall-mounted enclosures AE with 482.6 mm (19˝) mounting angles............104 Small fibre-optic distributor with mounting plate and splicing cassette holder .......................................................................105 IT power Power Distribution Rack/Module.................................................................408 Power System Module................................................................................409 Power Distribution Unit ...............................................................................414 MID measurement module for CMC III ........................................................421 Power supply..............................................................................................422 IT cooling Liquid Cooling Package ..............................................................................428 Aisle containment .......................................................................................435 Roof-mounted cooling unit for cooling IT equipment ...................................436 Small cooling units......................................................................................437 Chillers for IT cooling ..................................................................................441 IT monitoring CMC III – Monitoring system .......................................................................446 Door control system ...................................................................................459 Monitor/keyboard unit.................................................................................461 Dynamic Rack Control ................................................................................462 Management software ................................................................................463 IT security solutions Micro Data Centre ......................................................................................466 Climate control for Micro Data Centre .........................................................469 Data Centre Container ................................................................................472 Fire alarm and extinguisher system DET-AC/EFD Plus ................................473 Security rooms ...........................................................................................474 Rittal Catalogue 34/IT infrastructure 387 nextlevel for data centres Rittal opens up brand new perspectives for the IT world. Be it the standardised RiMatrix S data centre module or the efficient individual components, everything is available off the shelf with short delivery times. Rittal – The System. ◾ Rittal – Mass-produced, modular and standardised data centres with RiMatrix S ◾ Rittal – System components for individual IT solutions 388 Rittal Catalogue 34/IT infrastructure nextlevel for data centres Rittal Catalogue 34/IT infrastructure 389 IT infrastructure from the smallest to the largest ◾ RiMatrix S ◾ IT enclosure systems ◾ IT enclosures ◾ IT power ◾ IT cooling ◾ IT monitoring ◾ IT security solutions 390 Rittal Catalogue 34/IT infrastructure ◾ Rimatrix S – The first mass-produced data centre, pre-certified by TÜV Rheinland ◾ IT security rooms – Certified to ECB·S Rittal Catalogue 34/IT infrastructure 391 Your benefits with RiMatrix Unique IT system solutions from Rittal provide state-of-the-art data centre infrastructures. Flexibly select your standardised components from the RiMatrix system components IT enclosure systems/enclosures, IT power, IT cooling, IT monitoring and IT security solutions. In this way, the IT infrastructure may be tailored precisely to your requirements – leaving plenty of flexibility for future expansion. Faster – Precise-fit data centre infrastructures with “Rittal – The System”. Better – Standardised, coordinated system components Everywhere – Commissioning by our 1,000 international service engineers 392 Rittal Catalogue 34/IT infrastructure Rittal Catalogue 34/IT infrastructure 393 Your benefits with RiMatrix S RiMatrix S is the revolutionary alternative in data centre construction. Based on pre-configured, complete data centre modules, it supports the creation of standardised data centre infrastructures. The data centre modules already contain all the essential components, such as IT enclosure systems, power back-up and distribution, cooling, monitoring and security solutions. All data centre modules are pre-manufactured, available off the shelf, and permit fast configuration of coordinated customer solutions. Faster – Pre-configured data centre modules available off the shelf Better – Tested, pre-certified data centre modules with outstanding efficiency Everywhere – Installation in system-tested security rooms, standard aisle containment or containers 394 Rittal Catalogue 34/IT infrastructure Rittal Catalogue 34/IT infrastructure 395 396 RiMatrix S RiMatrix S RiMatrix S at a glance .................................................................................398 Standard room ...........................................................................................400 Standard security room ..............................................................................401 Standard container .....................................................................................402 Your benefits ◾ Standardised data centre infrastructures based on data centre modules ◾ Tested, pre-certified modules with outstanding efficiency ◾ Simplified planning with pre-configuration ◾ Available off the shelf ◾ Guaranteed efficiency ratings (PuE) ◾ Simplified service and administration processes RiMatrix S App Your configurator for standardised data centres for SMEs, branch concepts and flexible cloud applications. A simple user interface will guide you to your complete data centre in just five steps. Rittal Catalogue 34/IT infrastructure 397 RiMatrix S at a glance Standard room Integration of RiMatrix S modules into an existing property. Aisle containment is a combination of door and roof components which allow consistent separation of the hot and cold air. In order to achieve optimum air routing, precise-fit aisle containment is included with the supply. Model No. – Enhanced energy efficiency – Superior output density, due to guaranteed cold air supply – Dust- and water-tight in the protected area above the raised floor, IP 20 to IEC 60 529 Single 6 Double 6 Single 9 Double 9 7998.106 7998.107 7998.406 7998.407 Fire protection – Burglar resistance – Acrid gas-tightness – Dust and water protection – Early fire detection ◾ Room extinguisher system Optional Humidification and dehumidification system Optional External dimensions Width mm 2828 4854 2828 4854 Height mm 2750 2750 2750 2750 Depth mm 7080 7080 7080 7080 Server enclosure (600 x 2000 x 1200 mm) 6 pc(s). 12 pc(s). 8 pc(s). 16 pc(s). Combined network server enclosure (800 x 2000 x 1200 mm) 1 pc(s). 2 pc(s). 1 pc(s). 2 pc(s). 60 kW + 20 kW 2 x (60 kW + 20 kW) – – Rack configuration Uninterruptible power supply (Partner product, see note on page 407) 398 Rittal Catalogue 34/IT infrastructure RiMatrix S at a glance Security rooms Standard security room Container Construction of the standard security room – Fire protection category EI 90 to EN 1363/F90 to DIN 4102 – Protection from unauthorised access – Resistance category II to DIN V ENV 1630 – Basic EMC protection – Acrid gas-tightness based on DIN 18 095 – Impact test with 3,000 Nm energy after 30 min. flame impingement over uniform temperature curve – Dust and water protection to IP 56 to IEC 60 529 Standard container – Element core made from thermally effective insulating material – Robust, encapsulated sheet steel cassettes – Innovative connection system using patented profile technology – Use of temperature- and humidity-resistant seals – Use of climate control valves with electromagnetic drive – Dismantling and reassembly are possible at any time Robust sheet steel container specifically designed for IT applications The reinforced frame structure allows optimum weight distribution. Encapsulated interior wall structure with thermal insulating materials. – Vandal-proof interior in accordance with Resistance Class II to DIN EN 1630 – Fire protection category EI 30 to EN 1363 – Basic EMC protection – Dust and water protection to IP 55 to IEC 60 529 Single 6 Double 6 Single 9 Double 9 Single 6 Single 9 7998.306 7998.307 7998.606 7998.607 7998.206 7998.506 EI 90/F90 EI 30 WK II RC II ◾ – IP 56 IP 55 ◾ ◾ Optional Optional Optional Optional 2950 4974 2950 4974 3000 3000 2800 2800 2800 2800 3000 3000 7500 7500 7500 7500 7250 7250 6 pc(s). 12 pc(s). 8 pc(s). 16 pc(s). 6 pc(s). 8 pc(s). 1 pc(s). 2 pc(s). 1 pc(s). 2 pc(s). 1 pc(s). 1 pc(s). 60 kW + 20 kW 2 x (60 kW + 20 kW) without without 60 kW + 20 kW without Rittal Catalogue 34/IT infrastructure 399 RiMatrix S RiMatrix S Single 6/Double 6 ◾ 6 server enclosures, 1 network enclosure ◾ Two separate, optimised climate zones for server and technology zones ◾ UPS, battery case and distribution enclosure ◾ Space-saving climate control in the raised floor ◾ Consistent separation of cold air intake and warm exhaust air integrated into the mechanical concept ◾ Cable routing above the racks ◾ In the Double 6, the second module is a mirror image with integral cold aisle RiMatrix S Single 9/Double 9 ◾ 8 server enclosures, 1 network enclosure ◾ 1 climate zone for server sector ◾ When using a pre-existing UPS ◾ Distribution enclosures ◾ Space-saving climate control in the raised floor ◾ Consistent separation of cold air intake and warm exhaust air integrated into the mechanical concept ◾ Cable routing above the racks ◾ In the Double 9, the second module is a mirror image with integral cold aisle Standard room External dimensions mm Internal dimensions mm Model No. Single 6 Double 6 Single 9 Double 9 Width 2828 4854 2828 4854 Height 2750 2750 2750 2750 Depth 7080 7080 7080 7080 Width 2750 4774 2750 4774 Height 2700 2700 2700 2700 Depth 7000 7000 7000 7000 7998.106 7998.107 7998.406 7998.407 Physical security Fire protection – Burglar resistance – Acrid gas-tightness – Dust and water protection – Early fire detection ◾ Room extinguisher system Optional Humidification and dehumidification system Optional Infrastructure Server enclosure (600 x 2000 x 1200 mm) 6 pc(s). 12 pc(s). 8 pc(s). 16 pc(s). Combined network-server enclosure (800 x 2000 x 1200 mm) 1 pc(s). 2 pc(s). 1 pc(s). 2 pc(s). 60 kW + 20 kW 2 x (60 kW + 20 kW) – – 1 x 20 kW 2 x 20 kW – – Uninterruptible power supply (Partner product, see note on page 407) Redundancy Min. autonomy 13 minutes Low-voltage main distributor 1 pc(s). 2 pc(s). 1 pc(s). 2 pc(s). PDU Basic 14 pc(s). 28 pc(s). 18 pc(s). 36 pc(s). 60 kW + 10 kW 120 kW + 20 kW 90 kW + 10 kW 180 kW + 20 kW n+1 n+2 n+1 n+2 Climate control (ZUCS) Redundancy 400 Rittal Catalogue 34/IT infrastructure RiMatrix S RiMatrix S Single 6/Double 6 ◾ 6 server enclosures, 1 network enclosure ◾ Two separate, optimised climate zones for server and technology zones ◾ UPS, battery case and distribution enclosure ◾ Space-saving climate control in the raised floor ◾ Consistent separation of cold air intake and warm exhaust air integrated into the mechanical concept ◾ Cable routing above the racks ◾ In the Double 6, the second module is a mirror image with integral cold aisle RiMatrix S Single 9/Double 9 ◾ 8 server enclosures, 1 network enclosure ◾ 1 climate zone for server sector ◾ When using a pre-existing UPS ◾ Distribution enclosures ◾ Space-saving climate control in the raised floor ◾ Consistent separation of cold air intake and warm exhaust air integrated into the mechanical concept ◾ Cable routing above the racks ◾ In the Double 9, the second module is a mirror image with integral cold aisle Standard security room External dimensions mm Internal dimensions mm Model No. Single 6 Double 6 Single 9 Double 9 Width 2950 4974 2950 4974 Height 2800 2800 2800 2800 Depth 7500 7500 7500 7500 Width 2750 4774 2750 4774 Height 2700 2700 2700 2700 Depth 7300 7300 7300 7300 7998.306 7998.307 7998.606 7998.607 Physical security Fire protection EI 90/F90 Burglar resistance WK II Acrid gas-tightness ◾ Dust and water protection IP 56 Early fire detection ◾ Room extinguisher system Optional Humidification and dehumidification system Optional Infrastructure Server enclosure (600 x 2000 x 1200 mm) 6 pc(s). 12 pc(s). 8 pc(s). 16 pc(s). Combined network-server enclosure (800 x 2000 x 1200 mm) 1 pc(s). 2 pc(s). 1 pc(s). 2 pc(s). 60 kW + 20 kW 2 x (60 kW + 20 kW) – – 1 x 20 kW 2 x 20 kW – – Uninterruptible power supply (Partner product, see note on page 407) Redundancy Min. autonomy 13 minutes Low-voltage main distributor 1 pc(s). 2 pc(s). 1 pc(s). 2 pc(s). PDU Basic 14 pc(s). 28 pc(s). 18 pc(s). 36 pc(s). 60 kW + 10 kW 120 kW + 20 kW 90 kW + 10 kW 180 kW + 20 kW n+1 n+2 n+1 n+2 Climate control (ZUCS) Redundancy Rittal Catalogue 34/IT infrastructure 401 RiMatrix S RiMatrix S Single 6/Single 9 The RiMatrix S solution is assembled in the container, then commissioned and tested in accordance with our guidelines. Our services include: ◾ Advice and ROI calculation ◾ Delivery and integration into the customer infrastructure ◾ Commissioning and handover ◾ Documentation, training, instruction ◾ Hotline and service/service agreements Supply includes: – Complete technical documentation of all components and works, together with the relevant user manuals Standard container External dimensions mm Internal dimensions mm Model No. Single 6 Single 9 Width 3000 3000 Height 3000 3000 Depth 7250 7250 Width 2750 2750 Height 2685 2685 Depth 7000 7000 7998.206 7998.506 Physical security Fire protection EI 30 Burglar resistance RC II Acrid gas-tightness – Dust and water protection IP 55 Early fire detection ◾ Room extinguisher system Optional Humidification and dehumidification system Optional Infrastructure Server enclosure (600 x 2000 x 1200 mm) 6 pc(s). 8 pc(s). Combined network-server enclosure (800 x 2000 x 1200 mm) 1 pc(s). 1 pc(s). 60 kW + 20 kW – Uninterruptible power supply (Partner product, see note on page 407) Redundancy 1 x 20 kW Min. autonomy – 13 minutes Low-voltage main distributor 1 pc(s). 2 pc(s). PDU Basic 14 pc(s). 18 pc(s). 60 kW + 10 kW 90 kW+ 10 kW n+1 n+2 Climate control (ZUCS) Redundancy 402 Rittal Catalogue 34/IT infrastructure The first mass-produced data centre. Simply plug in and it’s ready to use. RiMatrix S Selector RiMatrix S App Your solution is configured on the basis of standardised data centre modules. Your configurator for standardised data centres for SMEs, sector concepts and flexible cloud applications. ◾ The planning phase, delivery and commissioning times are significantly shortened ◾ A precise efficiency calculation (including consumption figures) is always included as part of our consulting service, based on the data sheet ◾ Standardisation leads to significant potential savings ◾ The data centre modules are complete functional units (including electricity, cooling supply and monitoring) ◾ The modules are comprehensively measured and have a data sheet, and can therefore be ordered off the shelf using a model number An intuitive user interface will guide you to your complete data centre in five easy steps: 1. Requirements and peripheral conditions 2. Technical specifications 3. Standardised module selection 4. Optional packages 5. Your RiMatrix S solution 403 2 2 6 3 1 4 4 404 Rittal Catalogue 34/IT infrastructure IT enclosure systems/housings Network/server enclosures TS-IT TS-IT with vented door for room climate control ...........................................90 TS-IT with glazed door for rack climate control .............................................92 TS-IT with glazed door for rack climate control, pre-configured ....................94 TS-IT with glazed door for rack climate control, IP 55 ...................................95 Distributor racks Data Rack ....................................................................................................96 IT housings 5 VerticalBox ...................................................................................................97 FlatBox with 482.6 mm (19˝) mounting angles...............................................98 FlatBox with 482.6 mm (19˝) mounting frame ................................................99 Wall-mounted enclosure EL, 3-part, pre-configured with mounting angles..................................................................................100 Wall-mounted enclosure EL, 3-part, pre-configured with punched rails and mounting angles .....................................................101 Wall-mounted enclosure EL, 3-part, with mounting plate and mounting angles ..................................................................................102 Wall-mounted enclosure AE with 482.6 mm (19˝) mounting angles .............104 Small fibre-optic distributor with mounting plate and splicing cassette accommodation ........................................................105 Your benefits Network/server enclosures ◾ Individually usable for stand-alone siting and data centres ◾ Complete system solutions for small to large networks ◾ Maximum configuration diversity and protection for installed equipment ◾ Investment protection and flexibility thanks to simple conversions and use of our extensive modular system Wall-mounted enclosures ◾ Choose from an extensive range of products – the right enclosure to suit all applications – up to protection category IP 66 ◾ Wide choice of sizes available from 3 U to 21 U ◾ Wide choice of accessories with “Rittal – The System.” ◾ Fast assembly, conversion and simple installation based on the modular principle Sample applications Wall-mounted enclosures EL, see page 100 VerticalBox, see page 97 Wall-mounted enclosures AE with 482.6 mm (19˝) mounting angles, see page 104 TS-IT with glazed door for rack climate control, see page 92 Base/plinth and installation accessories, see page 507 TS-IT with vented door for room cooling, see page 90 Bayed with base/plinth and installation accessories, see page 507 Small fibre-optic distributor, see page 105 Rittal Catalogue 34/IT infrastructure 405 4 1 2 5 406 Rittal Catalogue 34/IT infrastructure IT power Power Distribution Rack Power Distribution Rack PDR .....................................................................408 Power Distribution Module PDM .................................................................408 Power System Module PSM busbars..............................................................................................409 PSM measurement bar for CMC III .............................................................410 PSM socket modules..................................................................................411 PCU Power Control Unit .............................................................................412 PSM accessories........................................................................................413 MID measurement module for CMC III ........................................................421 Power Distribution Unit PDU international........................................................................................414 PDU UK......................................................................................................418 PDU accessories ........................................................................................418 PDU configuration ......................................................................................419 PDU sample applications............................................................................420 Power supply Socket strips ..............................................................................................422 Your benefits ◾ Holistic, systematic energy management concepts ◾ Comprehensive, complete solutions for power distribution and back-up, consistently modular, and flexibly extendible at any time ◾ Optimum energy and cost efficiency with maximum availability of the entire system ◾ Reduced installation, administration and manpower costs ◾ High level of investment security ◾ All from a single partner Sample applications Power Distribution Rack PDR, see page 408 Power Distribution Module PDM, see page 408 Power System Module PSM, see page 409 Power distribution, see page 197 UPS (partner product) 3 Please note: Rittal has decided to stop offering its own single-phase and three-phase UPS systems. Instead, from now on, we are collaborating with a few selected product partners and recommending them in our system solutions and IT projects The advantages for our customers are as follows: ◾ Independent selection of the best UPS systems from a technical and financial perspective, depending on the technical requirements and regional framework conditions ◾ Clear regulation of the customer/supplier relationship in terms of procurement, installation, commissioning and services ◾ Clear regulation of warranties and product liability. For our chosen product partners, Rittal provides key basic information (such as technical properties, ordering instructions, contact addresses and other details, where applicable). Further details can be found on our website at www.rittal.com. Rittal Catalogue 34/IT infrastructure 407 Power Distribution Rack Power Distribution Rack PDR ◾ To accommodate a maximum of 8 PDM ◾ Height 1.20 m for 4 PDM and 2 m height for 8 PDM ◾ PDM may be retrofitted whilst operational ◾ A maximum of 32 racks may be fitted to the sub-distributor ◾ Fully shock hazard-protected ◾ Master switch in various configurations: – Isolator switch – Fuse-switch disconnector – Air circuit-breaker – RC circuit-breaker ◾ Low-voltage distribution up to 250 A Material: – Sheet steel Surface finish: – Enclosure frame: Dipcoatprimed – Doors, roof and base/plinth: Dipcoat-primed, powdercoated – Gland plates, punched sections with mounting flanges and mounting angles: Zinc-plated, clear chromated Colour: – RAL 7035 Supply includes: – Enclosure frame with door (without tubular door frame) – Rear panel – Side panels and roof plate – Levelling feet incl. base/plinth adaptor – Earthing of all enclosure panels – Busbars shock-hazardprotected – Integral master switch Note: – Observe the standards of the local electricity supply companies Approvals: – VDE Power Distribution Module PDM ◾ Mechanically latchable in the PDR ◾ Scalable ◾ RC circuit-breaker, optional Supply includes: – 482.6 mm/19˝ module, 3 U – Master switch – 4 fused 3-phase outlets to the rack – 3 x 230 V/16 A per outlet – Connected load 400 V, 3 AC, max. 63 A Photo shows a configuration example with equipment not included in the scope of supply Technical details: Available on the Internet Power Distribution Rack PDR Packs of Possible number of PDM modules 4 8 Width mm 800 800 Height mm 1200 2000 Depth mm 500 500 7857.310 7857.300 Model No. 1 pc(s). Accessories Flex-Block base/plinth system see page 510 TS base/plinth see page 512 Power Distribution Module PDM U Packs of Configuration 3 4 outlets per 10 kW Width mm 482.6 (19˝) Height mm 133.4 Depth mm 350 Model No. 1 pc(s). 7857.320 Length 3 m 1 pc(s). 7857.130 Length 5 m 1 pc(s). 7857.150 Length 9 m 1 pc(s). 7857.190 Also required Plug and play connection cable for PSM busbar to the server enclosures 408 Rittal Catalogue 34/IT infrastructure Power System Module PSM busbars PSM busbars + PSM socket modules PSM busbars The modular system facilitates basic configuration of the racks, thanks to a vertical support rail with single-/3-phase infeed. The various socket modules to supply the active components may be snap-fitted into the support rail. This can even be done whilst the system is operational, because the support section is shock hazard-protected. PSM socket modules The various modules, earthing pins, IEC320 etc. may be inserted into the support rail in any combination. This is easily achieved, even by non-electricians, thanks to the shock-hazard-protected plug & play system. Technical specifications/benefits: ◾ Each socket module picks off a phase on the support rail, either from infeed A or from the redundant infeed B, depending on the direction of connection. ◾ Single-/3-phase construction with a maximum current of 2 x (3 x 16 A). ◾ 3-phase redundant infeed supported ◾ The redundant circuit is completely separate from the 3 phases of the support rail ◾ Modules may be retrofitted whilst operational ◾ Modules may be equipped with integral overcurrent protection, so that only the affected module is deactivated in the event of an excessively high current; the other modules remain operational ◾ Overvoltage protection may be integrated into the supply line ◾ Various modules also available with current measurement and switchable outputs Approvals: Available on the Internet Circuit reversal by rotating the PSM module A Photo shows a configuration example with equipment not included in the scope of supply B PSM busbars For enclosure height mm Phases per infeed No. of infeeds Input current (A) Max. no. of module slots Connection, connector type Circuit breaker Packs of 16 A Model No. With measurement of voltage, current and power (consumption) via CMC, remote-controllable 2000 3 2 16 6 Wago X-COM – 1 pc(s). 7859.050 2000 1 1 32 6 CEE 2 1 pc(s). 7859.053 1 With 2 infeeds (jack), 3-phase redundancy 1200 3 2 16 4 Wago X-COM – 1 pc(s). 7856.010 2000 3 2 16 7 Wago X-COM – 1 pc(s). 7856.020 2200 3 2 16 8 Wago X-COM – 1 pc(s). 7856.008 With 3 m connection cable (connector type CEE/EN 60 309) 2000 3 1 16 7 CEE – 1 pc(s). 7856.005 2000 3 2 16 7 CEE – 1 pc(s). 7856.006 2 With 3 m connection cable (connector type CEE/EN 60 309) 2000 1 1 32 6 CEE 2 1 pc(s). 7856.321 2000 3 1 32 6 CEE 6 1 pc(s). 7856.323 Accessories: Also required: – PSM socket modules, see page 411 – – – – Mounting kit for PSM busbars, see page 413 Connection cables, see page 413 Cable lock, see page 413 Overvoltage protection, see page 413 3 4 Rittal Catalogue 34/IT infrastructure 409 Power System Module PSM measurement bar PSM measurement bar for CMC III Measurement bars for direct connection to the CMC III system. With a PSM mounting kit, the measurement bar may be vertically mounted in a 2000 mm high TS 8 or in the TS IT rack. Display and monitoring of all major output parameters is supported, separated by phase and infeed. An integral display provides a local on-site display in the rack. Remote administration and network connectivity are created via the CMC III system. Benefits: ◾ Modular extendible system ◾ For 16 A and 32 A phase current ◾ Various PSM connection modules (pin patterns) ◾ PSM modules may be connected with the system operational ◾ VDE-tested, shock hazard-protected system ◾ Easy to assemble ◾ CAN bus for connection to CMC III system ◾ Extensive management and monitoring functions (via CMC III) ◾ High-MTBF and measurement accuracy of 1% ◾ Energy-efficient electric design – minimal inherent power consumption ◾ High-quality aluminium housing, for flexible mounting Measurement functions: – Voltage (V), current (A), frequency (Hz) – Active power (kW), active energy (kWh), apparent power (VA), apparent energy (kVAh) – Power factor (cos phi) – Zero conductor measurement/load imbalance detection – Measurement per phase or infeed – Measurement accuracy 1% (kWh) to IEC 50 430-1 Material: – Extruded aluminium section, anodised Protection category IP to IEC 60 529: – IP 20 Standards: – EN 60 950 – EN 61 000-6-1 – EN 61 000-6-2 – EN 55 022 Safety directive: – 2006/95/EC EMC directive: – 2004/108/EC Approvals: Available on the Internet Photograph shows a configuration example with equipment not included in the scope of supply Model No. 7859.050 7859.053 16 32 No. of infeeds (3-phase, 16 A/single-phase, 32 A) 2 1 Connection cable, plug-in, various configurations ◾ – Version/rated current A (per phase) Connection cable, static, 3 m, with CEE connector, 32 A, single-phase (IEC 60 309) – ◾ Electromagnetic circuit-breaker (2 x 16 A, type C) – ◾ Input voltage 230 V/400 V (50/60 Hz) ◾ ◾ Power supply via CMC III system (24 V DC) ◾ ◾ CAN bus for direct connection to CMC III system (RJ 45, 2 x socket) ◾ ◾ Maximum no. of systems that may be connected to one CMC-PU III 8 8 Page Ambient conditions Operating temperature Storage temperature 0°C…+45°C -25°C…+70°C Ambient humidity % (non-condensing) 10 – 95 Accessories PSM connection cable, 3-phase, with CEE connectors (IEC 60 309), length 3 m (2 x required when using both infeeds) 7856.025 Fixed installation 413 PSM mouting kit for mounting on the TS IT enclosure frame, height 2000 mm 7856.029 7856.029 413 PSM module 4 x earthing-pin, black 7856.100 7856.100 411 PSM module 4 x earthing-pin, red 7856.240 7856.240 411 PSM module 6 x C13 7856.080 7856.080 411 PSM module 4 x C19 7856.230 7856.230 411 Other PSM socket modules 410 see page 411 Rittal Catalogue 34/IT infrastructure Power System Module PSM socket modules PSM socket modules Required module slots in PSM busbar Connector pattern Slots Thermal overcurrent protection Packs of Model No. Standard socket modules/non-switchable 1 C13 6 – 1 pc(s). 7856.080 1 C13 6 ◾ 1 pc(s). 7856.070 1 C13 4 ◾/per output 1 pc(s). 7856.220 1 Earthing-pin 320/CEE 7/4 4 – 1 pc(s). 7856.100 1 Earthing-pin 320/CEE 7/4 4 ◾ 1 pc(s). 7856.090 1 C19 4 – 1 pc(s). 7856.230 1 C13 red 6 – 1 pc(s). 7856.082 1 Earthing-pin, red 4 – 1 pc(s). 7856.240 1 Socket modules, international 1 France/Belgium/CEE 7/5 4 – 1 pc(s). 7856.120 1 Switzerland 5 – 1 pc(s). 7856.190 Socket 2 modules with LED display/current measurement per module 1 C13 6 – 1 pc(s). 7859.120 1 C19 4 – 1 pc(s). 7859.130 Socket modules with switchable slot/aggregate current measurement per module 2 C13 8 ◾ 1 pc(s). 7856.201 2 Earthing-pin 320/CEE 7/4/C13 4/2 ◾ 1 pc(s). 7856.203 2 C19/C13 4/2 ◾ 1 pc(s). 7856.204 3 Socket modules with switchable slot/individual current measurement per slot 2 Earthing-pin 320/CEE 7/4/C13 4/2 ◾ 1 pc(s). 7859.212 2 C13 8 ◾ 1 pc(s). 7859.222 2 C19/C13 4/2 ◾ 1 pc(s). 7859.232 Approvals: Available on the Internet 4 5 Rittal Catalogue 34/IT infrastructure 411 Power System Module PCU Power Control Unit Power Control Unit (PCU) PSM modules, active Socket modules, IP-compatible via CMC III, 1 U There are various PCU/module versions available for installation in the 482.6 mm (19˝) level of an IT rack and for use with PSM busbars. For each PCU/PSM module there is a choice of 6 or 8 slots with different pin patterns. Each output slot may be switched individually or in groups via the CMC III. Alarm limits may be configured via the integral 2-digit, red 7-segment display and the latest aggregate current can be read during normal operation. Following a power failure, the individual slots are switched on sequentially (i.e. individually, one after the other) in order to avoid current spikes. For the versions with individual current measurement, 2 LEDs for each outgoing slot indicate when individual limits are exceeded. For each slot, individual current limits may be defined via the CMC III. For operation, a control voltage of 24 V (DC)/approx. 0.2 A is required for each PCU/module, which may be provided via the CMC III. If used without the CMC III, an external power pack 24 V (DC) is required. For each power pack, up to 4 PCU/PSM modules may be connected. In such cases, the network/switch functions cannot be used. Description of functions: ◾ 2-digit local LED 7-segment current display – Legibility rotates according to the installation position – LED display per slot/overload detection (only with individual current measurement) ◾ Measuring and monitoring of the current per module and outgoing slot – Adjustable min/max limits – Measurement range: 0 – 16 A ◾ Alarm notifications via a flashing display ◾ Selective activation on voltage return ◾ In conjunction with the CMC III, the 6/8 individual current outlets may be activated and deactivated individually via HTTP and SNMP ◾ Remote administration of the power supply, editing and monitoring of remote limits, SNMP trap messages in case of alarm ◾ User administration via CMC III Technical specifications: – Rated operating voltage: 250 V – Rated current: 16 A – Switching load: 4000 VA per slot – Operating temperature +5°C...+45°C – Ambient humidity 50 – 95% rel. humidity, non-condensing Dimensions: – Width: 465 mm (19˝) – Height: 44.5 mm (1 U) – Depth: Refer to order table Operate PCU and PSM module with CMC III (network function – switchable outputs) For connection to the CMC III, in addition to the PU, the CAN bus unit for 2 channels is also required. Up to 4 PCU/PSM modules of the same type may then be connected to each channel. In such cases, the current and alarm messages may be forwarded to DCIM software (such as RiZone) via the network (SNMP) and slots switched via remote access. Preset current limits for PCU/PSM modules with individual current measurement (may be edited via CMC III): – LED green: 0 – 7 A – LED amber: 7 – 13 A – LED red: over 13 A Material: – Aluminium section with plastic cover Protection category IP to IEC 60 529: – IP 20 Supply includes: – 1 socket strip PCU/PSM 1U – 1 bus/infeed cable 24 V (DC) – 1 connector for power supply (PCU versions only) – 1 connector for power supply – 1 connection cable 0.3 m with Wieland connector (7200.001 only) Approvals: – CE – RoHS Description Type Input connector PCU 19˝ PCU PCU PSM Number of slots Switchable outputs Current measurement per output slot ◾ – (aggregate current) C13 C19 Earthingpin Wieland GST18 8 – – 19˝ C20 8 – – ◾ 19˝ C20 2 4 – ◾ Module PSM busbar 8 – – Enclosure depth Model No. mm 60 7200.001 ◾ 160 7859.225 ◾ 160 7859.235 ◾ – (aggregate current) 45 7856.201 45 7856.203 PSM Module PSM busbar 2 – 4 ◾ – (aggregate current) PSM Module PSM busbar 2 4 – ◾ – (aggregate current) 45 7856.204 PSM Module PSM busbar 2 – 4 ◾ ◾ 45 7859.212 PSM Module PSM busbar 8 – – ◾ ◾ 45 7859.222 PSM Module PSM busbar 2 4 – ◾ ◾ 45 7859.232 Also required: – Use with CMC III: Processing Unit 7030.000/7030.010, and CAN Bus Unit 7030.030, see page 450/456 – “Stand-alone” use: Power pack 7201.210 412 Rittal Catalogue 34/IT infrastructure Power System Module Accessories Mounting kit for PSM busbars Without cable routing For With cable routing Model No. TS For static installation TS-IT Plug and play compatibility system For Model No. 7856.011 TS 7856.029 For static installation 7856.022 Adjustable, for freely accessible 482.6 mm (19˝) level 7856.023 Connection cable for PSM-busbar Connection cable, 3-phase Length m Packs of Model No. 3 1 pc(s). 7856.025 3 1 pc(s). 7856.026 C14/X-Com 10 A/PMC 12, 1 – 2 kVA 3 1 pc(s). 7856.027 C20/X-Com 16 A/PMC 12, 3 kVA 3 1 pc(s). 7856.030 2 1 pc(s). 7200.217 0.5 2 pc(s). 7856.014 CEE-conforming 5-pole/16 A Connection cable, single-phase CEE-conforming 3-pole/16 A Connection cable, UPS, single-phase Connection cable C19/C20 16 A Connection cable C13/C14 16 A Cable lock PSM for all modules with EN 60 320 C13 connector configurations All terminal connection cables are therefore protected against unintentional disconnection of the power supply. Two bars are needed for two cables. Version Packs of Model No. Bar 20 pc(s). 7856.013 Accessories: – Optimum locking function is only available with connection cable 7856.014, see page 413 Overvoltage protection PSM Overvoltage protection Packs of Model No. Connected upstream of the busbar. With adaptor connector 1 pc(s). 7856.170 ◾ Fine fuse ◾ Connection: – Socket Wago X-COM – Connector Wago X-COM Rittal Catalogue 34/IT infrastructure Note: – One overvoltage protection is required for each infeed 413 Power Distribution Unit 414 Simple assembly ◾ Compact design ◾ Toolless clip attachment in the TS-IT ◾ Flexible mounting at the required height in the zero-U space ◾ Also suitable for individual installation on the enclosure frame ◾ Reliable protection against unauthorised access by covering any outputs that are not required ◾ Securely fitted connectors, thanks to connector lock Versatile function ◾ Measurement of power, current, active and apparent power and power factor ◾ Measurement of energy consumption and zero conductor current (with 3-phase PDUs) ◾ Measurement for any output is supported, depending on the PDU version ◾ Bistable relays ensure minimum inherent power consumption by the PDU ◾ Connection options for CMC III sensors (temperature, humidity, access) Professional monitoring ◾ Powerful CPU and Linux Web server ◾ TCP/IP v4 and v6 plus SNMP ◾ Configuration of limits ◾ User administration, e-mail sent in case of alarm ◾ Easily connected to DCIM software (e.g. RiZone) Rittal Catalogue 34/IT infrastructure 415 Power Distribution Unit Configuration Page 419 Benefits: ◾ With the compact PDU, any IT rack may be easily equipped with a professional power distribution system ◾ With the TS-IT rack, assembly is even tool-free ◾ Compact design ◾ Easy to assemble ◾ Power-saving design, minimal inherent consumption by the PDU itself, thanks to the use of bistable relays and OLED display with power-saving function ◾ Integral Web server for direct network connection with extensive user administration (not PDU basic/slave PDU) ◾ Redundant power supply from all 3 phases and additionally via an existing PoE (Power over Ethernet) network ◾ Extensive range of management and monitoring functions ◾ High-MTBF and measurement accuracy of 1% ◾ CAN bus for connecting slave PDUs (not PDU basic) ◾ Ambient monitoring with up to 4 CMC III sensors (temperature, humidity, access, vandalism) PDU design variants: PDU basic Robust, compact basic power distributor for the IT environment PDU metered Energy measurement per phase, i.e. output requirement of an entire IT rack PDU switched Measurement function per phase and individually switchable output slots PDU managed High-end IT rack, power distribution with energy measurement and monitoring functions for each individual output slot Material: – Extruded aluminium section, anodised Protection category IP to IEC 60 529: – IP 20 Standards: – EN 60 950 – EN 61 000-4 – EN 61 000-6 – EN 55 022 Safety directive: – 2006/95/EC EMC directive: – 2004/108/EC Photo shows a configuration example with equipment not included in the scope of supply PDU international, basic version Power No. of phases 416 Pin patterns Phase current A Dimensions Input Outputs C13 Outputs C19 PDU length mm Minimum enclosure height mm Model No. 1 16 CEE 24 4 970 1200 7955.110 1 32 CEE 24 4 1115 1400 7955.111 3 16 CEE 18 3 845 1200 7955.131 3 16 CEE 24 6 1145 1400 7955.132 3 32 CEE 24 6 1365 1800 7955.133 3 32 CEE 36 6 1710 2000 7955.134 3 16 CEE 42 – 1405 1800 7955.135 Rittal Catalogue 34/IT infrastructure Power Distribution Unit PDU international, metered version Power Pin patterns Dimensions Minimum enclosure height mm Model No. 710 800 7955.201 1225 1400 7955.210 1370 1800 7955.211 3 1100 1400 7955.231 24 6 1395 1800 7955.232 CEE 24 6 1620 2000 7955.233 32 CEE 36 6 1960 2200 7955.234 3 16 CEE 42 – 1665 2000 7955.235 3 32 CEE 48 – 2050 2200 7955.236 3 63 CEE 12 12 482.6 mm (19˝) / 3 U 1200 7955.238 Minimum enclosure height mm Model No. No. of phases Phase current A 1 1 Input Outputs C13 Outputs C19 16 C20 12 – 16 CEE 24 4 1 32 CEE 24 4 3 16 CEE 18 3 16 CEE 3 32 3 PDU length mm PDU international, switched version Power Pin patterns No. of phases Phase current A 1 1 Dimensions Outputs C19 PDU length mm Input Outputs C13 16 C20 12 – 710 800 7955.301 16 CEE 24 4 1225 1400 7955.310 1 32 CEE 24 4 1370 1800 7955.311 3 16 CEE 18 3 1100 1400 7955.331 3 16 CEE 24 6 1395 1800 7955.332 3 32 CEE 24 6 1620 2000 7955.333 3 32 CEE 36 6 1960 2200 7955.334 3 16 CEE 42 – 1665 2000 7955.335 3 32 CEE 48 – 2050 2200 7955.336 Outputs C19 PDU length mm Minimum enclosure height mm Model No. PDU international, managed version Power Pin patterns No. of phases Phase current A 1 1 Dimensions Input Outputs C13 16 C20 12 – 710 800 7955.401 16 CEE 24 4 1225 1400 7955.410 1 32 CEE 24 4 1370 1800 7955.411 3 16 CEE 18 3 1100 1400 7955.431 3 16 CEE 24 6 1395 1800 7955.432 3 32 CEE 24 6 1620 2000 7955.433 3 32 CEE 36 6 1960 2200 7955.434 3 16 CEE 42 – 1665 2000 7955.435 3 32 CEE 48 – 2050 2200 7955.436 Minimum enclosure height mm Model No. Slave PDU international, managed version Power Pin patterns No. of phases Phase current A 1 1 Dimensions Outputs C13 16 C20 12 – 710 800 7955.901 16 CEE 24 4 1225 1400 7955.910 1 32 CEE 24 4 1370 1800 7955.911 3 16 CEE 18 3 1100 1400 7955.931 3 16 CEE 24 6 1395 1800 7955.932 3 32 CEE 24 6 1620 2000 7955.933 Rittal Catalogue 34/IT infrastructure Outputs C19 PDU length mm Input 417 Power Distribution Unit PDU UK, basic version Power Pin patterns No. of phases Phase current A 1 1 Dimensions Outputs C19 PDU length mm Minimum enclosure height mm Model No. 6 – 440 600 7955.510 8 – 535 800 7955.511 UK 10 – 640 800 7955.512 UK 12 – 745 1000 7955.513 Input Outputs UK connector 13 UK 13 UK 1 13 1 13 PDU UK, metered version Power Pin patterns No. of phases Phase current A 1 1 1 Dimensions Outputs C19 PDU length mm Minimum enclosure height mm Model No. 16 – 1210 1400 7955.520 20 4 1695 2000 7955.521 20 4 1955 2200 7955.522 Input Outputs UK connector 13 UK 16 CEE 32 CEE PDU UK, switched version Power Pin patterns No. of phases Phase current A 1 1 1 Dimensions Outputs C19 PDU length mm Minimum enclosure height mm Model No. 16 – 1210 1400 7955.530 16 4 1380 1800 7955.531 16 4 1520 1800 7955.532 Input Outputs UK connector 13 UK 16 CEE 32 CEE PDU UK, managed version Power Pin patterns No. of phases Phase current A 1 1 1 Dimensions Outputs C19 PDU length mm Minimum enclosure height mm Model No. 16 – 1210 1400 7955.540 16 4 1380 1800 7955.541 16 4 1525 1800 7955.542 Input Outputs UK connector 13 UK 16 CEE 32 CEE Slave PDU UK, managed version Power Pin patterns No. of phases Phase current A 1 1 1 Dimensions Outputs C19 PDU length mm Minimum enclosure height mm Model No. 16 – 1210 1400 7955.940 16 4 1380 1800 7955.941 16 4 1525 1800 7955.942 Input Outputs UK connector 13 UK 16 CEE 32 CEE PDU accessories Packs of Model No. 10 pc(s). 7955.010 Covers for C19 slot, lockable 10 pc(s). 7955.015 Connector, universal lock for C14/C20 connector 20 pc(s). 7955.020 Connection cable D/C19, 1.8 m 1 pc(s). 7200.216 Connection cable C19/C20, 1.8 m 1 pc(s). 7200.217 457 457 Covers for C13 slot, lockable Page CMC III sensors (max. 4 sensors per PDU) CMC III/PDU sensor type Packs of Model No. Page Temperature sensor 1 pc(s). 7030.110 Temperature/humidity sensor (combi-sensor) 1 pc(s). 7030.111 Infrared access sensor 1 pc(s). 7030.120 Vandalism sensor 1 pc(s). 7030.130 454 454 454 454 CMC III CAN bus connection cable RJ 45, length 0.5 – 10 m 1 pc(s). 418 see page 457 Rittal Catalogue 34/IT infrastructure Power Distribution Unit Configuration PDU version managed/ managed slave1) switched metered basic Mechanical May be fitted in the zero-U space in the 600 mm wide TS-IT, tool-free ◾ ◾ ◾ ◾ Colour coding of phases and fuse circuits (depending on PDU version) ◾ ◾ ◾ ◾ Connection cable, static, 3 m, with CEE connector (IEC 60 309) or C20 ◾ ◾ ◾ ◾ Connector lock for C13 and C19 pin patterns (optional) ◾ ◾ ◾ ◾ Lockable cover for slots that are not needed (for C13/C19) ◾ ◾ – – PDU slave version without display and Ethernet connection for use with PDU master and CMC III ◾ – – – Power supply 110 V – 230 V/400 V, inherent power consumption approx. 15 W ◾ ◾ ◾ – Rated current 16/32 A, single-phase/3-phase ◾ ◾ ◾ ◾ Electrical Version additionally 63 A/3-phase (blade PDU, no Zero-U) – – ◾ – Electromagnetic circuit-breaker, 16 A, type C (only with 32/63 A PDU versions) ◾ ◾ ◾ ◾ PDU self-supplied, no external power supply required ◾ ◾ ◾ – PDU power supply redundant across all phases (with 3-phase PDUs) ◾ ◾ ◾ – Emergency power supply to PDU web server via PoE (Power over Ethernet), remains accessible even in the event of a mains failure ◾ ◾ – – Switching function per output slot ◾ ◾ – – Sequential activation of the outputs once the power is resumed (avoids overload peaks) ◾ ◾ – – Switching states are saved even in the event of a power failure ◾ ◾ – – Bistable relays/minimal power consumption ◾ ◾ – – Grouping (joint switching of several outputs) ◾ ◾ – – Measurement functions Voltage (V), current (A), frequency (Hz) ◾ ◾ ◾ – Active power (kW), active energy (kWh), apparent power (kVA), apparent energy (kVAh) ◾ ◾ ◾ – Power factor (cos phi) ◾ ◾ ◾ – Zero conductor measurement/load imbalance detection ◾ ◾ ◾ – Fuse monitoring (with 32/63 A versions) ◾ ◾ ◾ – Measurement per phase or infeed – ◾ ◾ – Measurement per output slot ◾ – – – Measurement accuracy +/-1% (kWh) to IEC 50 430-1 ◾ ◾ ◾ – ◾ ◾ ◾ – Connectivity/management functions Powerful 400 MHz CPU and Linux operating system (not with slave versions) Graphic OLED display 128 x 128 pixels (RGB) with back-lighting and energy-saving mode (display of output data and basic IP configuration) ◾ ◾ ◾ – Position sensor for display rotation (and correct visualisation in the DCIM software RiZone) ◾ ◾ ◾ – Multi-colour LEDs (green/amber/red) to indicate switching states and limits per phase or infeed – ◾ – – Multi-colour LEDs (green/amber/red) to indicate switching states and limits per individual output slot ◾ – – – Settable limits (warning/alarm) ◾ ◾ ◾ – Operating hours meter, total and cyclical (resettable) ◾ ◾ ◾ – Ethernet connection (RJ 45) ◾ ◾ ◾ – USB A-port for firmware update and data logging functions ◾ ◾ ◾ – CAN bus interface (RJ 45) ◾ ◾ ◾ – Web server (HTTP, HTTPS, SSL, SSH) NTP, Telnet ◾ ◾ ◾ – TCP/IP v4 and v6, DHCP ◾ ◾ ◾ – SNMP v1, v2c and v3 ◾ ◾ ◾ – FTP/SFTP (update/file transfer) ◾ ◾ ◾ – E-mail forwarding in case of alarm (SMTP) ◾ ◾ ◾ – User administration including rights management ◾ ◾ ◾ – LDAP(S)/Radius/Active Directory connection ◾ ◾ ◾ – Syslog server connection (max. 4 servers) ◾ ◾ ◾ – Plug & play drivers in the Rittal RiZone DCIM software ◾ ◾ ◾ – MIB for linking into 3rd party software ◾ ◾ ◾ – Suitable for connection to Rittal CMC III system ◾ ◾ ◾ – CMC III CAN bus sensors may be connected for ambient monitoring (max. 4 sensors) ◾ ◾ ◾ – CMC III sensors that may be used: Temperature sensor, temperature/humidity sensor, infrared access sensor, vandalism sensor ◾ ◾ ◾ – Ambient conditions Operating temperature Storage temperature Ambient humidity % (non-condensing) Protection category IP to IEC 60 529 1) 0°C...+45°C 0°C...+45°C 0°C...+45°C 0°C...+45°C -25°C...+70°C -25°C...+70°C -25°C...+70°C -25°C...+70°C 10 – 95 10 – 95 10 – 95 10 – 95 IP 20 IP 20 IP 20 IP 20 Managed slave without display/network Rittal Catalogue 34/IT infrastructure 419 Power Distribution Unit Sample applications Master/slave principle Up to 3 slave PDUs may be connected to one PDU. Connection of CAN bus sensors Additionally, up to 4 CMC III CAN bus sensors may be connected to the PDU master for ambient monitoring (temperature, humidity, access). PDU metered master managed slave PDU switched master (without display) PDU managed master Up to 4 CAN bus components supported PDU metered master PDU switched master PDU managed master IP network Configuration example of a redundant network infrastructure Monitoring via 2 separate networks. The leading system is configurable. CMC III CMC III sensors CAN PDU metered master PDU managed slave PDU switched master (without display/network) PDU managed master IP network Without display/network 420 Rittal Catalogue 34/IT infrastructure Power System Module CMC III monitoring system Page 446 For upgrading existing installations or for measuring individual 16 A/32 A equipment, the PSM 1 U MID measurement modules may be used. These are readily integrated into the 482.6 mm (19˝) level or into the zero-U space of the rack, and connected using suitable connection cables. These measurement modules have an MID-compliant active energy meter and are therefore suitable for energy billing purposes. MID stands for “Measurement Instruments Directive” and regulates 10 types of measurement equipment based on EU Directive 2004/22/EC. MID-approved equipment is authorised for use throughout the EU. Benefits: ◾ For 16 A and 32 A phase current ◾ Easy to assemble ◾ Billable MID measurement units ◾ CAN bus for connection to CMC III system ◾ Extensive management and monitoring functions (via CMC III) ◾ High-MTBF and measurement accuracy of +/-1% ◾ Energy-efficient electric design – minimal inherent power consumption ◾ 1 U, 482.6 mm (19˝) sheet steel enclosure, for flexible mounting Measurement functions: – Voltage (V), current (A), frequency (Hz) – Active power (kW), active energy (kWh), apparent power (kVA), apparent energy (kVAh) – Power factor (cos phi) – Zero conductor measurement/ load imbalance detection – Measurement per phase or infeed – Measurement accuracy +/-1% (kWh) to IEC 50 430-1 – MID certification of the active energy meter, suitable for energy billing purposes Material: – Enclosure: Sheet steel Colour: – RAL 9005 Protection category IP to IEC 60 529: – IP 51 Standards: – EN 60 950 – EN 61 000-6-1 – EN 61 000-6-2 – EN 55 022 Safety directive: – 2006/95/EC EMC directive: – 2004/108/EC Photo shows a configuration example with equipment not included in the scope of supply MID measurement module for CMC III Model No. 7859.312 7859.332 16 A 32 A Sheet steel enclosure 1 U for 482.6 mm (19˝) mounting, approx. 200 mm deep ◾ ◾ Assembly parts ◾ ◾ Connection cable, plug-in, various versions ◾ ◾ Input voltage 230 V/400 V (50/60 Hz) ◾ ◾ No. of infeeds (each 3-phase) 2 2 Rated current A (per phase) 16 32 Power supply across all 3 phases (internal power pack) ◾ ◾ Maximum no. of systems that may be connected to one CMC-PU III 8 8 Operating temperature -25°C…+55°C -25°C…+55°C Storage temperature -25°C…+70°C -25°C…+70°C 10 – 95 10 – 95 Connection cables, set: 1 x input 2 m/1 x output 2 m CEE (IEC 60 309, jack) (2 x required when using both infeeds) 7859.315 7859.335 Connection cables for PSM busbars: Input cable 3 m/output cable 1.2 m (with Wago X-COM connector) (2 x required when using both infeeds) 7859.316 – Version Ambient conditions Ambient humidity % (non-condensing) Accessories Rittal Catalogue 34/IT infrastructure 421 Power supply Socket strips Socket strips 1 2 in an aluminium duct The socket strips in the aluminium duct are available in various lengths with different functional elements. Special attention has been devoted to practical, universal fastening: Variable attachment facilities have been created with an angle bracket which may be inserted in four positions. Hence, for example, the 482 mm long socket strip may optionally be mounted on 482.6 mm (19˝) mounting angles, the 482.6 mm (19˝) mounting frame, the enclosure frame, or in the rear section of the wall-mounted distributor. Without additional mounting accessories, the socket strip may be inserted into all sections with a 25 mm pitch pattern. This makes selection much easier, as well as providing additional flexibility and saving on warehousing. Provision has also been made for cable routing of the infeed, and when mounting in the 482.6 mm (19˝) section there is adequate space to route the infeed between the socket strip and the mounting angle without kinks. The arrangement of the IEC 320 sockets at a 45° angle allows unrestricted use of angular connectors. Technical specifications: Earthing-pin socket strips: – Connector type F (CEE 7/4) – Rated operating voltage: 250 V – Connection cable: 2 m long H05VV-F3G1.5 without connector, with connector Belgium/France (B/F) socket strips: – Connector type E (CEE 7/5) – Rated operating voltage: 250 V – Connection cable: 2 m long H05VV-F3G1.5 with wire end ferrules Equipment connector strips (IEC 60 320-1/C13) Socket strips: – Rated operating voltage: 250 V – Connector input: C14 or cable H05VV-F3G1.0, depending on the version Material: – Aluminium section: Natural anodised – Socket inserts: Polycarbonate Supply includes: – Socket strip – Two mounting brackets – Assembly parts Standards: – Earthing-pin socket: DIN 49 440 – IEC 320 socket: EN 60 320-2-2 – Overvoltage protection: DIN EN 61 643-11 (VDE 0675 Part 6-11) 3 T1 Note: – Depending on the application, we recommend use of a charging current reserve to prevent incorrect activation due to starting-current spikes 44 T2 Approvals: – CE – RoHS 44 31 .75 Technical details: Available on the Internet 4 Connector type earthing-pin Attachment Version Without rocker switch 5 With rocker switch Overvoltage protection, type 3 and interference suppressor filter Rated Con- No. of current nection sockets A 16 16 Cable Cable Wallmounted 482.6 mm Frame distributor, (19˝) level horizontal Length (T1) mm Mounting dimenModel No. sion (T2) mm1) 3 ◾ – – 262.6 232.5 7240.110 7 ◾ ◾ ◾ 482.6 452.5 7240.210 12 ◾ – – 658.6 628.5 7240.310 3 ◾ ◾ – 306.6 276.5 7240.120 7 ◾ ◾ ◾ 482.6 452.5 7240.220 5 ◾ ◾ ◾ 482.6 452.5 7240.230 9 ◾ – – 658.6 628.5 7240.330 16 Cable Circuit-breaker, B12, 16 Cable 5 ◾ ◾ ◾ 482.6 452.5 7240.240 UPS strip, connection cable with 10 A IEC 320 connector type E, with 10 A G-fuse 10 C14 7 ◾ ◾ ◾ 482.6 452.5 7240.260 FI switch, 0.03 A, 2-pole, type A 16 Cable 5 ◾ ◾ ◾ 482.6 452.5 7240.280 B/F sockets, type E with earthing pin (Belgium/France) 16 Cable 7 ◾ ◾ ◾ 482.6 452.5 7240.510 2-pole, 10 kA 6 1) Variable attachment distance within a range of 25 mm, the dimension given is hole centre – hole centre of the mounting bracket Connector type C13 Attachment Version Wallmounted 482.6 mm Frame distributor, (19˝) level horizontal Length (T1) mm Mounting dimenModel No. sion (T2) mm1) For IEC 320 connectors 10 Cable 12 ◾ ◾ ◾ 482.6 452.5 7240.200 For IEC 320 connectors with IEC 320 input 10 C14 9 ◾ ◾ ◾ 482.6 452.5 7240.201 1) 422 Rated Con- No. of current nection sockets A Variable attachment distance within a range of 25 mm, the dimension given is hole centre – hole centre of the mounting bracket Rittal Catalogue 34/IT infrastructure Power supply Socket strips Socket strip Earthing-pin, with plastic housing Robust 8-way earthing-pin socket strip in a plastic housing. The strip may be mounted vertically on the enclosure frame or in the 482.6 mm (19˝) section. 2.5 U are required for 482.6 mm (19˝) installation. The earthing-pin inserts are arranged at an angle of 45° so that angular connectors are also easily used. The connection cable is attached to a terminal connection (behind a removable cover) in the socket strip. The socket strip has a terminal for an external earthing connection. Socket strip Model No. 8-way, earthing-pin 7000.630 Supply includes: – 1 socket strip – Assembly parts Material: – Plastic (grey/black) Approvals: – CE – RoHS Technical specifications: – Connector type F (CEE 7/4) – Rated operating voltage: 230 V – Rated current: 16 A – Connection cable: Type H05VV-F3G1.5 (black) with wire end ferrules – Length: 2 m – Dimensions: W x H x D: 483 x 74 x 45 mm Socket strip Material: – Aluminium section: Natural anodised – Socket inserts: Polycarbonate Earthing-pin, with ammeter The socket strip with ammeter measures the active power of the connected equipment. The 482.6 mm (19˝) long socket strip may optionally be mounted on the 482.6 mm (19˝) mounting angles, on the 482.6 mm (19˝) mounting frame, on the enclosure frame or in the rear section of wall-mounted distributors. The installation bracket may be mounted in four different positions for variable mounting. Without additional mounting accessories, the socket strip may be inserted into all sections with a 25 mm pitch pattern. Display colour: – Blue, luminescent Supply includes: – 1 socket strip – 2 installation brackets – Assembly parts – 3 m connection cable with wire end ferrules Approvals: – CE – RoHS Technical specifications: – Rated operating voltage: 250 V – Rated current: 16 A – Connection cable: Type H05VV-F3G1.5 (black) with wire end ferrules – Length: 3 m – Dimensions: W x H x D: 480 x 45 x 50 mm Attachment Version IEC 320/CEE 7/4 1) No. of sockets 7 Frame Wall-mounted distributor, horizontal 482.6 mm (19˝) level ◾ ◾ ◾ Length mm 482.6 Mounting dimensions Model No. mm1) 464.1 7240.300 Variable attachment distance within a range of 25 mm, the dimension given is hole centre – hole centre of the mounting bracket Rittal Catalogue 34/IT infrastructure 423 Power supply Socket strips Junction box with multi-functional bracket The angle bracket can be installed in all network enclosures in a system-compatible design. The junction box serves as a transfer point for the power supply to all equipment (fans, lights and socket strips). As well as being used as a junction box or transfer point, the bracket can also accommodate the enclosure internal thermostat 3110.000 or the hygrostat 3118.000, due to its integral holes. Packs of Model No. 1 set(s) 7280.035 Material: – Sheet steel Colour: – RAL 7035 Supply includes: – 1 junction box – 1 bracket – 6 m connection cable 3 x 1.5 mm2 (flexible) Socket ◾ For mounting on support rails TS 35/7.5 and TS 35/15 to EN 60 715 ◾ Uniform screw terminals from one side ◾ Enclosure width 45 mm Version Packs of Model No. Earthing-pin/CEE 7/4 2 pc(s). 2506.100 Technical specifications: – Rated voltage: 250 V – Rated current: 16 A Material: – Polyamide Colour: – Grey Standards: – DIN VDE 0620-1 – DIN 49 440-1 Service socket for enclosure frame attachment/16 A Integration of a service socket within a separate supply circuit, independently of the IT network and UPS. Simple installation via an angle bracket for attaching to the enclosure frame. Packs of Model No. 1 set(s) 7280.100 Type: Earthing contact/CEE 7/4 Material: – Angle bracket: Sheet steel – Socket: Plastic Surface finish: – Angle bracket: Zinc-plated Supply includes: – 1 angle bracket – 1 damp-proof socket (IP 44) – Assembly parts 424 Rittal Catalogue 34/IT infrastructure Power supply Socket strips Energy-Box, 3 U, 482.6 mm (19˝) Technical specifications: – Depth-adjustable top hat rail for installed equipment to DIN 43 880, sizes 1 – 3 (e.g. to accommodate built-in sockets, circuit-breakers etc.). – Cable clamping rear, one N and one PE rail on insulated base/plinth – Plastic hood including extension cover (UL 94-V0) – Maximum accommodation capacity of 22 HP (22 x 18 mm = 396 mm) – Enclosure height: 3 U – Enclosure depth: 155 mm – Overall installation depth with C rail: 155 mm – Dimensions: W x H x D: 483 x 132.5 x 155 mm Packs of U Model No. 1 pc(s). 3 7480.035 Photograph shows a configuration example with equipment not included in the scope of supply Colour: – RAL 7035 Supply includes: – 1 Energy-Box with fitted N and PE rails and brush strip – 4 connection clamps, 35 mm2 – 18 connection clamps, 16 mm2 – 2 blanking covers – 12 clips for cable strain relief – Identification strips, self-adhesive Energy-Box, 3 U, 482.6 mm (19˝) U Model No. 3 7480.300 Pull-out Technical specifications: – Depth-adjustable top hat rail for snap-in attachment of installed equipment to DIN 43 880 in sizes 1 – 3 (e.g. to accommodate built-in sockets, circuit-breakers etc.) or entire installation assemblies – Cable clamping at rear – Two power distribution rails with connection clamps on insulated base/plinth – Plastic hood including extension cover – Maximum accommodation capacity of 22 HP (22 x 18 mm = 396 mm) – Enclosure height: 3 U – Enclosure depth: 223 mm – Maximum extension: 220 mm – Dimensions: W x H x D: 483.5 x 132 x 223 mm Photograph shows a configuration example with equipment not included in the scope of supply Colour: – RAL 7035 Supply includes: – 1 Energy-Box with fitted N and PE rails and brush strip – 4 connection clamps, 35 mm2 – 18 connection clamps, 16 mm2 – 2 blanking covers – 12 clips for cable strain relief – Identification strips, self-adhesive Rittal Catalogue 34/IT infrastructure 425 3 2 3 2 2 2 6 6 4 5 426 Rittal Catalogue 34/IT infrastructure IT cooling Liquid Cooling Package LCP Rack CW ............................................................................................428 LCP Inline CW ............................................................................................429 LCP T3+ CW ..............................................................................................430 LCP Rack DX .............................................................................................431 LCP Inline DX..............................................................................................432 Accessories for LCP CW/DX.......................................................................433 Aisle containment Aisle containment .......................................................................................435 Roof-mounted cooling units For cooling IT equipment ............................................................................436 Small cooling units Roof-mounted fans.....................................................................................437 Fan mounting plate for TS-IT ......................................................................437 Fan mounting plate.....................................................................................438 Fan expansion kit........................................................................................438 Fan cross member......................................................................................439 Fan expansion kit for fan cross member .....................................................439 Vent cover ..................................................................................................440 Chillers for IT cooling Overall cooling output 15 – 261 kW ............................................................441 Your benefits 1 ◾ State-of-the-art climate control technology, from cooling single racks to complete data centres ◾ Individual climate control concepts for rack, suite and room cooling ◾ Enhanced security plus superior energy and cost efficiency ◾ Optimisation with aisle containment and cross-system control concepts ◾ Energy-efficient cooling with IT chillers ◾ Minimisation of operating costs with free cooling ◾ Environmentally friendly, thanks to resource and CO2 savings ◾ Planning, assembly, commissioning and servicing – all from a single supplier! Sample applications Aisle containment, see page 435 Liquid Cooling Package LCP, see page 428 IT chiller with integral free cooling, see page 441 Pipework Raised floor for cold air supply CRAC system (partner product) Please note: Rittal no longer sells its own CRAC systems; instead, from now on are collaborating with a few selected product partners and recommending them for use in system solutions and IT projects. The advantages for our customers are as follows: ◾ Independent selection of the best CRAC systems from a technical and financial perspective, depending on the technical requirements and regional framework conditions ◾ Clear regulation of the customer/supplier relationship in terms of procurement, installation, commissioning and services ◾ Clear regulation of warranties and product liability. For our chosen product partners, Rittal provides key basic information (such as technical properties, ordering instructions, contact addresses and other details, where applicable). Further details can be found on our website at www.rittal.com. Rittal Catalogue 34/IT infrastructure 427 Liquid Cooling Package Accessories for LCP Page 433 Chillers for IT cooling Page 441 Network/server enclosures TS-IT Page 92 Benefits: – Maximum energy efficiency thanks to EC fan technology and IT-based control – Minimal pressure loss at the air end, which in turn minimises the power consumption of the fans – Control of the server inlet temperature – With redundant temperature sensor integrated at the air end as standard – Optimum adaptability thanks to dynamic, continuous control of the cold water volume flow – By using high water inlet temperatures, the proportion of indirect free cooling is increased, which in turn reduces operating costs – Targeted cooling output thanks to modular fan units – Fan modules configurable as n+1 redundancy – Standard 3-phase connection for electrical redundancy – The separation of cooling and rack prevents water from entering the server enclosure – Up to 55 kW cooling output on a footprint of just 0.36 m² – Minimal area load due to low weight Functions: The LCP draws in the air at the sides at the rear of the server enclosures, cools it using highperformance compact impellers, and blows the cooled air back into the front part of the server enclosure at the sides Colour: – RAL 7035 Monitoring: – Monitoring of all system-relevant parameters such as server air intake temperature, server waste air temperature, water inlet/return temperature, water flow, cooling output, fan speed, leakage – Direct connection of the unit via SNMP over Ethernet Optional: – Fully integrated fire detection and extinguisher system – Automatic server enclosure door opening – Various sensors – Racks 2200 mm high Temperature control: – Linear fan control – Two-way control valve Protection category IP to IEC 60 529: – IP 20 Cooling medium: – Water Technical details: Available on the Internet Photo shows a configuration example with equipment not included in the scope of supply LCP Rack CW Model No. Packs of Total cooling output/Number of fan modules required kW Number of fan modules in supplied state 3311.130 3311.230 3311.260 10 / 1 20 / 2 30 / 3 10 / 1 20 / 2 30 / 3 40 / 4 45 / 5 55 / 6 1 1 4 Width mm 300 300 300 Height mm 2000 2000 2000 Depth mm 1000 1200 1200 Installation in bayed enclosure suite Flush Flush Flush 230, 1~, 50/60 400, 3~, 50/60 230, 1~, 50/60 400, 3~, 50/60 230, 1~, 50/60 400, 3~, 50/60 Connector Connector Connector 4800 4800 8000 Fans may be exchanged with the system operational ◾ ◾ ◾ EC fan ◾ ◾ ◾ Water inlet temperature °C 15 15 15 Rated operating voltage V, ~, Hz Type of electrical connection Air throughput at max. cooling output m³/h Permissible operating pressure (p. max.) bar Duty cycle % Water connection Weight as delivered kg 6 6 6 100 100 100 1½" external thread 1½" external thread 1½" external thread 214.0 214.0 235.0 Page Accessories Fan module 1 pc(s). 3311.011 3311.011 3311.011 434 Touchscreen display, colour 1 pc(s). 3311.030 3311.030 3311.030 433 Connection hose, bottom and top 2 pc(s). 3311.040 3311.040 3311.040 433 Add-on cover 1 pc(s). 3301.221 3301.421 3301.421 433 428 Rittal Catalogue 34/IT infrastructure Liquid Cooling Package Accessories for LCP Page 433 Chillers for IT cooling Page 441 Network/server enclosures TS-IT Page 92 Benefits: – Maximum energy efficiency thanks to EC fan technology and IT-based control – Minimal pressure loss at the air end, which in turn minimises the power consumption of the fans – Optimum adaptability due to dynamic, continuous control of the cold water volume flow – By using high water inlet temperatures, the proportion of indirect free cooling is increased, which in turn reduces operating costs – Targeted cooling output thanks to modular fan units – Fan modules configurable as n+1 redundancy – Standard 3-phase connection for electrical redundancy – With redundant temperature sensor integrated at the air end as standard – The separation of cooling and rack prevents the ingress of water into the server enclosure – Up to 55 kW cooling output on a footprint of just 0.36 m² – Minimal area load due to low weight Functions: The hot air is drawn in from the room or hot aisle at the rear of the device and expelled at the front into the cold aisle after cooling. The LCP achieves maximum performance and efficiency in conjunction with Rittal cold aisle containment. With this product, a raised floor is not necessary. Monitoring: – Monitoring of all system-relevant parameters such as server air intake temperature, server waste air temperature, water inlet/return temperature, water flow, cooling output, fan speed, leakage – Direct connection of the unit via SNMP over Ethernet – Integration into RiZone Temperature control: – Linear fan control – Two-way control valve Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 20 Cooling medium: – Water Optional: – Various sensors – Racks 2200 mm high Technical details: Available on the Internet Photo shows a configuration example with equipment not included in the scope of supply LCP Inline CW Model No. Packs of Total cooling output/Number of fan modules required kW Number of fan modules in supplied state 3311.530 3311.540 3311.560 10 / 1 20 / 2 30 / 3 18 / 2 27 / 3 30 / 4 40 / 4 45 / 5 55 / 6 1 2 4 Width mm 300 300 300 Height mm 2000 2000 2000 Depth mm 1200 1200 1200 Set forward Flush Set forward 230, 1~, 50/60 400, 3~, 50/60 230, 1~, 50/60 400, 3~, 50/60 230, 1~, 50/60 400, 3~, 50/60 Connector Connector Connector 4800 4800 8000 Fans may be exchanged with the system operational ◾ ◾ ◾ EC fan ◾ ◾ ◾ Permissible operating pressure (p. max.) bar 6 6 6 100 100 100 1½" external thread 1½" external thread 1½" external thread 15 15 15 214.0 221.0 235.0 Installation in bayed enclosure suite Rated operating voltage V, ~, Hz Type of electrical connection Air throughput at max. cooling output m³/h Duty cycle % Water connection Water inlet temperature °C Weight as delivered kg Page Accessories Fan module 1 pc(s). 3311.011 3311.011 3311.011 434 Touchscreen display, colour 1 pc(s). 3311.030 3311.030 3311.030 433 Connection hose, bottom and top 2 pc(s). 3311.040 3311.040 3311.040 433 Add-on cover 1 pc(s). 3301.421 3301.421 3301.421 433 Rear adaptor 1 pc(s). 3311.080 – 3311.080 433 Rittal Catalogue 34/IT infrastructure 429 Liquid Cooling Package Accessories for LCP Page 433 Chillers for IT cooling Page 441 Network/server enclosures TS-IT Page 92 Benefits: – Error-tolerant, efficient cooling of server racks with high thermal loads – Fully redundant – two active cooling circuits and two switchable power circuits ensure optimum fail-safeness – The built-in controllers are capable of adapting all device parameters automatically to preserve the required cooling outputs – A separate decentralised intelligence which automatically recognises emergency situations and responds appropriately with the "auto-load balancing" and "auto-recovery" functions – Interfaces which facilitate userfriendly operation and monitoring via the network or BSM systems Functions: The LCP draws in the air at the sides at the rear of the server enclosures, cools it using highperformance compact impellers, and blows the cooled air back into the front part of the server enclosure at the sides Monitoring: – Monitoring of all system-relevant parameters such as server air intake temperature, server waste air temperature, water inlet/return temperature, water flow, cooling output, fan speed, leakage Temperature control: – Linear fan control – Two-way control valve Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 20 Cooling medium: – Water Optional: – Fully integrated fire detection and extinguisher system – Automatic server enclosure door opening – Various sensors Photo shows a configuration example with equipment not included in the scope of supply LCP T3+ CW Model No. Total cooling output kW 3300.239 Width mm 300 Height mm 2200 Depth mm Rated operating voltage V, ~, Hz Type of electrical connection Fans may be exchanged with the system operational EC fan Duty cycle % Weight as delivered kg 430 Page 20 1200 230, 1~, 50/60 C19/C20 ◾ ◾ 100 215.0 Rittal Catalogue 34/IT infrastructure Liquid Cooling Package Accessories for LCP Page 433 Chillers for IT cooling Page 441 Network/server enclosures TS-IT Page 92 Benefits: – Maximum energy efficiency due to EC fan technology and IT-based control – Minimal pressure loss at the air end, which in turn minimises the power consumption of the fans – Control of the server inlet temperature – Due to the speed-regulated compressor, the cooling output is ideally adapted to actual requirements – With redundant temperature sensor integrated at the air end as standard – Specific maintenance of the LCP DX due to separation of cooling and server rack – Absorbed thermal energy is emitted to the ambient air at the external condenser location, without heating up the installation room – Ideal for IT cooling of small and medium-sized locations – One or two racks can be cooled separately Functions: The LCP draws in the air at the sides at the rear of the server enclosures, cools it using highperformance compact impellers, and blows the cooled air back into the front part of the server enclosure at the sides Temperature control: – Linear fan control – Inverter-regulated compressor Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 20 Cooling medium: R410a Optional: – Humidifier, reheater or condensate pump – Higher cooling output Photo shows a configuration example with equipment not included in the scope of supply LCP Rack DX Model No. Packs of Total cooling output/Number of fan modules required kW 3311.410 3311.420 12 / 4 12 / 4 Width mm 300 300 Height mm 2000 2000 Depth mm 1000 1200 Installation in bayed enclosure suite Flush Flush 380, 3~, 50/60 480, 3~, 50/60 380, 3~, 50/60 480, 3~, 50/60 Connection clamp Connection clamp 4800 4800 Fans may be exchanged with the system operational ◾ ◾ EC fan ◾ ◾ 100 100 181.0 181.0 Rated operating voltage V, ~, Hz Type of electrical connection Air throughput at max. cooling output m³/h Duty cycle % Weight as delivered kg Page Accessories SNMP card 1 pc(s). 3311.320 3311.320 434 Condenser unit 1 pc(s). 3311.360 3311.360 433 Add-on cover 1 pc(s). 3301.221 3301.421 433 Rittal Catalogue 34/IT infrastructure 431 Liquid Cooling Package Accessories for LCP Page 433 Chillers for IT cooling Page 441 Network/server enclosures TS-IT Page 92 Benefits: – Maximum energy efficiency due to EC fan technology and IT-based control – Minimal pressure loss at the air end, which in turn minimises the power consumption of the fans – Temperature monitoring and control – Due to the speed-regulated compressor, the cooling output is ideally adapted to actual requirements – With redundant temperature sensor integrated at the air end as standard – Minimal area load due to low weight – Specific maintenance of the LCP DX due to separation of cooling and server rack – Absorbed thermal energy is emitted to the ambient air at the external condenser location, without heating up the installation room – Ideal for IT cooling of small and medium-sized locations – One or two racks can be cooled separately Functions: The LCP is designed for siting within a bayed enclosure suite. Hot air is drawn in from the aisle at the rear of the device, cooled by the high-capacity compact impellers, and blown back into the room or cold aisle after cooling Temperature control: – Linear fan control – Inverter-regulated compressor Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 20 Cooling medium: – R410a Optional: – Humidifier, reheater or condensate pump – Higher cooling output Photo shows a configuration example with equipment not included in the scope of supply LCP Inline DX Model No. Packs of Total cooling output/Number of fan modules required kW 3311.430 3311.440 12 / 4 12 / 4 Width mm 300 300 Height mm 2000 2000 Depth mm 1000 1200 Installation in bayed enclosure suite Flush Flush 380, 3~, 50/60 480, 3~, 50/60 380, 3~, 50/60 480, 3~, 50/60 Connection clamp Connection clamp 4800 4800 Fans may be exchanged with the system operational ◾ ◾ EC fan ◾ ◾ 100 100 181.0 181.0 Rated operating voltage V, ~, Hz Type of electrical connection Air throughput at max. cooling output m³/h Duty cycle % Weight as delivered kg Page Accessories SNMP card 1 pc(s). 3311.320 3311.320 434 Condenser unit 1 pc(s). 3311.360 3311.360 433 Add-on cover 1 pc(s). 3301.221 3301.421 433 432 Rittal Catalogue 34/IT infrastructure Liquid Cooling Package Accessories for LCP CW/DX Touchscreen display For LCP CW Packs of Model No. for LCP Rack, Inline, CW The colour display offers the opportunity of directly monitoring key LCP functions and implementing settings. 3311.130 3311.230 3311.260 3311.530 3311.540 3311.560 1 pc(s). 3311.030 Condenser unit For LCP DX Packs of Model No. The condenser unit is needed to operate the refrigerant-based LCPs, and comprises the external condenser and fan. 3311.410 3311.420 3311.430 3311.440 1 pc(s). 3311.360 Refrigerant: – R410a Vertical shielding for enclosure height 2000 mm To block the airflow on the left and right of the 482.6 mm (19˝) level. Length: 1900 mm Material: – Cellular PU foam – Flame-inhibiting to UL 94 (HF1) – Self-adhesive on one side Connection hose bottom and top Flexible connection hose, may be cut to required length, including union nuts on both sides for connecting the LCP to existing pipework. Note: – The pipework between the LCP DX and the condenser is not included with the supply. For enclosure width mm Packs of Model No. Side panel and 482.6 mm (19˝) level 600 1 pc(s). 3301.380 800 1 pc(s). 3301.390 LCP and 482.6 mm (19˝) level 600 1 pc(s). 3301.370 800 1 pc(s). 3301.320 For sealing between For LCP CW 3311.130 3311.230 3311.260 3311.530 3311.540 3311.560 Thread Water Packs Model No. connection of from 11/2˝ bottom/top 2 pc(s). 3311.040 Rear adaptor For LCP Inline CW Packs of Model No. for LCP Inline CW May be positioned to the rear of the set forward LCP Inline to close the existing gap in the rear section. 3311.530 3311.560 1 pc(s). 3311.080 Add-on cover For LCP Packs of Model No. for 2000 mm high LCP For height compensation in conjunction with 2200 mm high server enclosures. 3300.239, 3311.230, 3311.260, 3311.420, 3311.440, 3311.530, 3311.540, 3311.560 1 pc(s). 3301.421 Material: – Sheet steel Surface finish: – Spray-finished Colour: – RAL 7035 Rittal Catalogue 34/IT infrastructure 433 Liquid Cooling Package Accessories for LCP CW/DX 434 SNMP card For LCP DX Packs of Model No. For connecting LCP Rack/Inline DX units to the network. 3311.410 3311.420 3311.430 3311.440 1 pc(s). 3311.320 Fan module For LCP Packs of Model No. for LCP To increase the cooling output, individual fan modules may be retro-fitted into the LCPs. This can also achieve redundancy or reduce the electric power consumption of the LCP. 3311.130, 3311.230, 3311.260, 3311.530, 3311.540, 3311.560 1 pc(s). 3311.011 The LCP 3311.130/.230/.530 (max. 30 kW) is supplied with one fan module as standard. To achieve the max. cooling output of 30 kW, the customer/service should install two additional fan modules. The LCP 3311.540 (max. 30 kW) is supplied with two fan modules as standard. To achieve the max. cooling output of 30 kW, the customer/service should install two additional fan modules. The LCP 3311.260/.560 (max. 55 kW) is supplied with four fan modules as standard. To achieve the max. cooling output of 55 kW, the customer/service should install two additional fan modules. Rittal Catalogue 34/IT infrastructure Aisle containment Liquid Cooling Package Page 428 Network/server enclosures TS-IT Page 90 Slimline door element with viewing window and sliding door. Stable roof elements in a composite metal with a high level of light permeability. Where required, safety glass may also be used. Applications: – Depending on the application, aisle containment may be used with CRAC systems or LCP Inline as hot or cold aisle containment. Model No. Rittal Catalogue 34/IT infrastructure Benefits: – Increased energy efficiency and performance capability of climate control. – Superior output density is facilitated, thanks to targeted cold air supply. – Easily installed and retrofitted, as it is fully compatible with the TS 8 enclosure system. – An inexpensive way to boost the performance of your existing plant, lengthening the investment cycle until a replacement needs to be purchased. Functions: Aisle containment is a combination of door and roof components which facilitate consistent separation of the hot and cold air in the data centre. Such separation is pivotal to saving energy and increasing the efficiency of the available climate control technology. 7999.922 Note: – Individual project planning only Photo shows a configuration example with equipment not included in the scope of supply Page 435 Roof-mounted cooling units Climate control accessories Page 369 Temperature control: – Control of the server air infeed temperature Material: – Sheet steel Colour: – RAL 7035 Protection category IP to IEC 60 529: – External circuit IP 34 – Internal circuit IP 54 Supply includes: – Nano-coated condenser – Integral electric condensate evaporation – Fully wired ready for connection – Drilling template – Assembly parts Note: – A roof plate with cut-out to match the enclosure dimensions is required for cooling IT equipment Model No. Packs of 3301.800 Total cooling output L25 L35 W 3000 Total cooling output L35 L45 W 3200 Width mm 597 Height mm 417 Depth mm Page 895 Rated operating voltage V, ~, Hz 230, 1~, 50 Type of electrical connection Plug-in terminal strip Pre-fuse (T) A 16 Start-up current max. A 36 Rated current max. A 9.2 Refrigerant R134a Permissible operating pressure (p. max.) bar 25 Duty cycle % 100 Operating temperature range +10°C...+45°C Setting range +20°C...+25°C Weight as delivered kg 72.0 Accessories Condensate hose 1 pc(s). 3301.612 Door-operated switch 1 pc(s). 4127.010 639 see page 692 3286.500 369 Air baffle plates Filter mats 436 3 pc(s). 377 Rittal Catalogue 34/IT infrastructure Small cooling units Roof-mounted fans for TS, TS-IT in the office sector This roof ventilation concept offers a wealth of performance, assembly and cost benefits associated with the use of integrated ventilation systems. This roof-mounted fan may be ordered with and without a roof plate. Another outstanding feature is the enormous volumetric flow in proportion to exceptionally low noise levels, making it ideal for use in sensitive office areas. Technical specifications: – With 3164.620 pre-configured on the roof plate, solid, based on TS – Easy assembly; no need to make mounting cutouts – Radial fan Colour: – RAL 7035 Supply includes: – Fully wired ready for connection – Assembly parts 1 51 3164.620 3164.230 230, 1~, 50/60 230, 1~, 50/60 15001) 15001) with roof plate without roof plate Width (B) mm 800 511 Height (H) mm 240 227 Depth (T) mm 800 511 Air throughput, unimpeded airflow m3/h Version Power consumption W Rated current A Noise level dB (A) 68/81 68/81 0.3/0.35 0.3/0.35 40 40 +20°C…+55°C +20 °C … +55 °C Temperature display in 1 U patch panel 7109.035 7109.035 Digital enclosure internal temperature display and thermostat 3114.200 3114.200 Enclosure internal thermostat 3110.000 3110.000 Operating temperature range B Page T T B 41 45 0 0 0 41 0 45 13.5 Rated operating voltage V, ~, Hz: H Model No. H Technical details: Available on the Internet 51 1 Accessories 1) 379 379 379 800 m3/h at 40 Pa counterpressure using two vented base/plinth trim panels 8100.802 in the Flex-Block base/plinth system Fan mounting plate for TS-IT For active ventilation. For use in the cut-out integrated into the roof plate. The unit may optionally be extended with additional fans. Technical specifications for one fan: – Fan expansion kit 7980.000, see page 438 Supply includes: – 1 fan unit – 2 fans – 1 thermostat – 1 connection cable, top – Assembly parts Note: – Connection via distributor box or country-specific connector Technical specifications of thermostat: – Rated operating voltage: 250 V – Temperature range: +5°C…+55°C Accessories: Colour: – RAL 7035 – Fan expansion kit, see page 438 WxD mm No. of prewired fans No. of fans supported Model No. 800 x 600, 600 x 1000, 600 x 1200 2 3 5502.010 800 x 800, 800 x 1000, 800 x 1200 2 6 5502.020 Rittal Catalogue 34/IT infrastructure 437 Small cooling units Fan mounting plate For upgrading existing DK-TS applications. The fan mounting plate may be retro-fitted in all DK-TS network enclosures from above. The plate is mounted at the front of the enclosure, whilst the rear section is left free for cable entry. A rubber cable clamp strip is supplied loose for optional sealing at the rear. The following combinations are also possible: ◾ Solid roof plate raised with 20 or 50 mm roof spacers ◾ Roof plate for cable entry raised with 20 or 50 mm roof spacers ◾ Vented roof plate for cable entry In conjunction with the large swing frame, usage is only possible from an enclosure depth of 800 mm, in conjunction with a roof plate for cable entry from 1000 mm. Technical specifications for one fan: – Rated operating voltage: 230 V – Power consumption: 15/14 W at 50/60 Hz – Air throughput (unimpeded air flow): 160/180 m3/h, 50/60 Hz – Operating temperature range: -10°C…+55°C For enclosures Number of fans Max. number of fans Model No. 600 2 pc(s). 4 pc(s). 7966.035 600 800 1000 1200 2 pc(s). 6 pc(s). 7968.035 800 600 2 pc(s). 6 pc(s). 7986.035 800 800 1000 1200 2 pc(s). 6 pc(s). 7988.035 Width mm Depth mm 600 The air throughput can be increased with the fan expansion kit 7980.000. Accessories: – Fan expansion kit, see page 438 – Foam rubber cable clamp strip 2573.000 for sealing at the sides and targeted air routing when bayed, see page 652 Colour: – RAL 7035 40 Technical specifications of thermostat: – Rated operating voltage: 250 V – Operating temperature range: +5°C…+55°C 52 5/7 25 85 5/5 38 Supply includes: – 2 fans – 2/4 cut-outs to extend to 4/6 fans – Thermostat – Rubber cable clamp strip – Thermostat and fan fully wired to connection cable (3.5 m) Note: – Not suitable for crane transportation – Not suitable for combination with 482.6 mm (19˝) mounting frame Fan expansion kit For retro-fitting various fan units or to supplement the fan mounting plate. Technical specifications 7980.000: – Rated operating voltage: 230 V~ – Power consumption: 15/14 W at 50/60 Hz – Air throughput (unimpeded air flow): 160/180 m3/h, 50/60 Hz – Noise level (unimpeded air flow): 37 dB (A) – Operating temperature range: -10°C…+55°C Dimensions W x H x D mm Packs of Model No. 119 x 119 x 38 1 set(s) 7980.000 119 x 119 x 25 1 set(s) 7980.100 119 x 119 x 38 1 set(s) 7980.148 Supply includes: – 1 fan expansion kit – Assembly parts – 1 connection cable (0.61 m) Technical specifications 7980.100: – Rated operating voltage: 230 V~ – Power consumption: 14/12 W at 50/60 Hz – Air throughput (unimpeded air flow): 108/120 m3/h, 50/60 Hz – Noise level (unimpeded air flow): 34 dB (A) – Operating temperature range: -20°C…+70°C Technical specifications 7980.148: – Rated operating voltage: 48 V (DC) – Power consumption: 7.7 W – Air throughput (unimpeded air flow): 184 m3/h – Noise level (unimpeded air flow): 43 dB (A) – Operating temperature range: -20°C…+70°C 438 Rittal Catalogue 34/IT infrastructure Small cooling units For upgrading existing DK-TS applications. Specifically for installing in one-piece perforated sheet steel doors Given the growing packaging density in data communications and network enclosures, active, direct ventilation of the enclosure is essential. The fan cross member, which is attached to the tubular door frame of the rear or front door, supports horizontal air routing via the servers and therefore facilitates faster heat dissipation from active components. Technical specifications: – Standard cross member with two fans – Air throughput, unimpeded airflow 600 m3/h – By adding two fan expansion kits, the air throughput is increased to 1200 m3/h – The direction of air flow is easily reversed by rotating the fan – Several cross members may be positioned in a cascade arrangement – Simple mounting on the tubular door frame Supply includes: – Fully wired ready for connection – Connection cable 2.5 m – Assembly parts Note: – Only for mounting on the tubular door frame Accessories: – Fan expansion kit, see page 438 Technical details: Available on the Internet B H Fan cross member For doors with width 600 mm Model No. Rated operating voltage V, ~, Hz: 3165.630 Page 230, 1~, 50/60 Air throughput (unimpeded airflow) m3/h T 600 Power consumption for two fans W 70/70 Rated current fan A 0.38/0.36 Width (B) mm 493 Height (H) mm 606 Depth (T) mm 64,5 Noise level dB (A) 55 Temperature range +20°C…+55°C Colour RAL 7035 Accessories Digital enclosure internal temperature display and thermostat 3114.200 Enclosure internal thermostat 3110.000 379 379 3165.830 Page For doors with width 800 mm Model No. Rated operating voltage V, ~, Hz: 230, 1~, 50/60 Air throughput (unimpeded airflow) m3/h 600 Power consumption for two fans W 70/70 Rated current fan A 0.38/0.36 Width (B) mm 693 Height (H) mm 606 Depth (T) mm 64,5 For doors with width (mm) 800 Noise level dB (A) 55 Temperature range +20°C…+55°C Colour RAL 7035 Accessories Digital enclosure internal temperature display and thermostat 3114.200 Enclosure internal thermostat 3110.000 Fan expansion kit for fan cross member To increase the air throughput of the fan cross member. Rittal Catalogue 34/IT infrastructure 379 379 To fit fan cross member Model No. 3165.630, 3165.830 3165.230 439 Small cooling units Cover plates for fan panels Packs of Model No. for FlatBox To cover unused fan panels when using fan motors in the FlatBox. 6 pc(s). 7507.760 Material: – Sheet steel Surface finish: – Powder-coated Vent cover The ideal addition for incorporating sealed racks into an existing central climate control system. The stepped connection is suitable for standard pipe diameters 150 mm and 200 mm, thereby ensuring effective cooling thanks to targeted air exchange inside the rack. Colour: – RAL 7035 Supply includes: – Assembly parts Width mm Height mm Depth mm Packs of Model No. 450 144 300 1 pc(s). 7826.750 Design: – Diameter of hose connection: 150 mm/200 mm – Maximum cut-out on roof plate: 380 mm x 230 mm Material: – PET-G, transparent Supply includes: – Assembly parts 440 Rittal Catalogue 34/IT infrastructure Chillers for IT cooling Applications: – Especially for cooling IT applications, such as LCP or air/ water heat exchangers. Safetyrelevant features such as redundant speed-controlled pumps, compressors or buffer stores are the distinguishing features of these atmospherically sealed systems Technical specifications: – Compact design with control components in the front and air intake via both side panels, air outlet upwards – Pressure-sealed system – Digital thermostat for temperature control with setpoint and actual value display – Monitoring interface with CMC III supported – Integral bypass Temperature control: – Electronic control with digital display (factory setting +15°C) Protection category IP to IEC 60 529: – IP 54 Supply includes: – Chiller wired ready for connection – Multi-lingual documentation – Functional diagram and wiring plans Optional: – Free cooling may be integrated from 15 kW. Please follow the instructions – Buffer store for separate siting – Emergency cooling with mains water infeed – Special voltages Note: – Technical deviations in terms of cooling output, dimensions or weight are possible for unit types with free cooling – The performance data varies according to the option package chosen, and should be taken from the IT chiller configurator. We reserve the right to make technical modifications – Pump and tank are available as options with IT chillers. If these configuration options are required, the technical data applies Technical details: Available on the Internet Total cooling output 15 – 67 kW Model No. Total cooling output kW Packs of 3232.701 3232.711 3232.721 3232.731 3232.741 15 24 36 48 67 Width mm 810 810 810 1000 1100 Height mm 1542 1542 1542 1780 1606 Depth mm 1800 1800 1800 2300 3240 400, 3~, 50 400, 3~, 50 400, 3~, 50 400, 3~, 50 400, 3~, 50 22000 Rated operating voltage V, ~, Hz Air throughput at max. cooling output m³/h 10880 10880 14000 18000 Power consumption kW 6.9 9.7 14.6 21 21 Rated current max. A 23 25 37 46.5 52.2 R407c R407c R407c R407c R410a 28 28 28 28 45 Operating temperature range -20°C...+43°C -20°C...+43°C -20°C...+43°C -20°C...+43°C -20°C...+43°C Temperature of liquid +5°C...+15°C +5°C...+15°C +5°C...+15°C +5°C...+15°C +5°C...+15°C Pump capacity l/min 60 60 120 120 240 Pump pressure bar 2.5 2.5 2.5 2.5 2.5 Number of cooling circuits 1 1 1 1 2 Steel tank, with 10 mm condensate insulation ◾ ◾ ◾ ◾ ◾ Tank capacity l 48 48 48 100 200 Refrigerant Permissible operating pressure (p. max.) bar Water connection 1½" internal thread 1½" internal thread 1½" internal thread 1½" internal thread 2½" internal thread Weight as delivered kg 400.0 415.0 505.0 710.0 896.0 Operating weight kg 448.0 463.0 553.0 810.0 1096.0 RAL 7035 RAL 7035 RAL 7035 RAL 7035 RAL 9002 Colour Rittal Catalogue 34/IT infrastructure Page 441 Chillers for IT cooling Total cooling output 77 – 124 kW Model No. Packs of 3232.751 3232.761 3232.771 3232.781 3232.791 77 88 99 117 124 Width mm 1100 1100 1100 1100 1100 Height mm 1606 1606 1606 1875 1875 Depth mm 3240 3240 3240 3240 3240 400, 3~, 50 400, 3~, 50 400, 3~, 50 400, 3~, 50 400, 3~, 50 22000 27000 27000 34100 34100 24 26 29 36 41 59.2 64.2 69.2 84.1 89.1 R410a R410a R410a R410a R410a 45 45 45 45 45 Operating temperature range -20°C...+43°C -20°C...+43°C -20°C...+43°C -20°C...+43°C -20°C...+43°C Temperature of liquid +5°C...+15°C +5°C...+15°C +5°C...+15°C +5°C...+15°C +5°C...+15°C Pump capacity l/min 240 240 240 470 470 Pump pressure bar 2.5 2.5 2.5 2.5 2.5 Number of cooling circuits 2 2 2 2 2 Steel tank, with 10 mm condensate insulation ◾ ◾ ◾ ◾ ◾ 200 200 200 300 300 Total cooling output kW Rated operating voltage V, ~, Hz Air throughput at max. cooling output m³/h Power consumption kW Rated current max. A Refrigerant Permissible operating pressure (p. max.) bar Tank capacity l Water connection Page 2½" internal thread 2½" internal thread 2½" internal thread 2½" internal thread 2½" internal thread Weight as delivered kg 896.0 906.0 912.0 1000.0 Operating weight kg 1096.0 1106.0 1112.0 1300.0 1300.0 RAL 9002 RAL 9002 RAL 9002 RAL 9005 RAL 9005 Colour 1000.0 Total cooling output 155 – 261 kW Model No. 3232.801 3232.811 3232.821 3232.891 3232.831 Total cooling output kW 155 172 196 235 261 Width mm 1100 1100 1100 1500 2200 Height mm 1875 1875 1875 1975 2450 Depth mm 3240 3240 4240 4350 3400 400, 3~, 50 400, 3~, 50 400, 3~, 50 400, 3~, 50 400, 3~, 50 72800 Rated operating voltage V, ~, Hz Air throughput at max. cooling output m³/h Packs of 32600 32600 50000 49000 Power consumption kW 47 52 60 70 80 Rated current max. A 108 120 127 149 181 R410a R410a R410a R410a R410a 45 45 45 45 45 Operating temperature range -20°C...+43°C -20°C...+43°C -20°C...+43°C -20°C...+43°C -20°C...+43°C Temperature of liquid +5°C...+15°C +5°C...+15°C +5°C...+15°C +5°C...+15°C +5°C...+15°C Pump capacity l/min 500 500 500 500 810 Pump pressure bar 2.5 2.5 2.5 2.5 2.5 Number of cooling circuits 2 2 2 2 2 Steel tank, with 10 mm condensate insulation ◾ ◾ ◾ ◾ ◾ 300 300 300 300 700 Refrigerant Permissible operating pressure (p. max.) bar Tank capacity l Water connection 2½" internal thread 2½" internal thread 2½" internal thread 2½" internal thread 3" internal thread Weight as delivered kg 1000.0 1000.0 1000.0 1900.0 Operating weight kg 1300.0 1300.0 1300.0 2200.0 3200.0 RAL 9002 RAL 9002 RAL 9002 RAL 9002 RAL 9002 Colour 442 Page 2500.0 Rittal Catalogue 34/IT infrastructure Chillers for IT cooling Total cooling output 291 – 481 kW Model No. 3232.841 3232.851 3232.861 3232.871 3232.881 Total cooling output kW 291 326 387 430 481 Width mm 2200 2200 2200 2200 2200 Height mm 2450 2450 2450 2450 2450 Depth mm 3400 3400 4250 4250 4250 400, 3~, 50 400, 3~, 50 400, 3~, 50 400, 3~, 50 400, 3~, 50 Rated operating voltage V, ~, Hz Air throughput at max. cooling output m³/h Packs of 71500 70200 106200 104100 102000 Power consumption kW 93 106 121 141 159 Rated current max. A 203 225 293 307 336 R410a R410a R410a R410a R410a Refrigerant Permissible operating pressure (p. max.) bar 45 45 45 45 45 Operating temperature range -20°C...+43°C -20°C...+43°C -20°C...+43°C -20°C...+43°C -20°C...+43°C Temperature of liquid +5°C...+15°C +5°C...+15°C +5°C...+15°C +5°C...+15°C +5°C...+15°C Pump capacity l/min 810 810 1200 1200 1200 Pump pressure bar 2.5 2.5 2.5 2.5 2.5 Number of cooling circuits 2 2 2 2 2 Steel tank, with 10 mm condensate insulation ◾ ◾ ◾ ◾ ◾ 700 700 700 700 700 Tank capacity l Water connection 3" internal thread 3" internal thread 4" internal thread 4" internal thread 4" internal thread Weight as delivered kg 2700.0 2800.0 3100.0 3000.0 3600.0 Operating weight kg 3400.0 3500.0 3800.0 3700.0 4300.0 RAL 9002 RAL 9002 RAL 9002 RAL 9002 RAL 9002 Colour Page RiMatrix S New see page 398 Rittal Catalogue 34/IT infrastructure 443 1 1 2 3 1 2 4 444 Rittal Catalogue 34/IT infrastructure IT monitoring CMC III – Monitoring system CMC III system representation ....................................................................446 CMC III system overview.............................................................................448 CMC III Processing Unit/Compact ..............................................................450 CMC III sensors/accessories CMC III control units/CMC III sensors .........................................................451 Interface for CMC II sensors .......................................................................451 Access System...........................................................................................452 Interface for PSM, PCU ..............................................................................452 PSM and slave PDU for direct connection ..................................................453 CMC III accessories Power supply unit .......................................................................................457 Programming cable ....................................................................................457 CAN bus connection cable .........................................................................457 Connection cable/extension........................................................................457 Extension cable RJ 12 ................................................................................458 Mounting unit, 1 U ......................................................................................458 Mounting unit .............................................................................................458 Door control system Door control system ...................................................................................459 Door control module...................................................................................460 Door kit ......................................................................................................460 Door comfort handle...................................................................................460 Door switch ................................................................................................460 Monitor/keyboard unit Monitor/keyboard unit, 1 U .........................................................................461 KVM switch ................................................................................................461 Dynamic Rack Control RFID aerial ..................................................................................................462 RFID tags ...................................................................................................462 RFID controller............................................................................................462 CMC III CAN bus DRC................................................................................462 Management software RiZone........................................................................................................463 Server shutdown software ..........................................................................463 Your benefits ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ A better overview of your IT infrastructure Enhanced security Automated processes Exceptional cost efficiency High energy savings Simple project management Fast installation Flexible, individual solutions with standard products from Rittal High standard of quality with coordinated standard products Sample applications CMC III, see page 449 Liquid Cooling Package LCP, see page 428 Monitor/keyboard unit, see page 461 Electric comfort handle TS 8, see page 564 Rittal Catalogue 34/IT infrastructure 445 CMC III – Monitoring system Computer Multi Control (CMC) is an alarm system for network and server enclosures, cases, containers and rooms. ◾ It monitors temperatures, humidity, access, smoke, energy and many other physical ambient parameters. ◾ It is a modular system that can be flexibly adapted to meet the customer's specific monitoring require- 1 ments. CMC III Processing Unit 3 2 ◾ User benefits plus exceptional savings are achieved, thanks to monitoring via the network and the automation of security processes. Further information can be found at: www.rittal.com 12 4 7 9 8 10 11 446 Rittal Catalogue 34/IT infrastructure 5 6 CMC III Processing Unit, see page 449 Power supply Redundant power supply CMC III I/O unit CMC III power unit CMC III PSM measuring bar for direct connection ! Up to 16 CAN bus systems may be connected # CMC III vandalism sensor $ CMC III temperature sensor &* CAN bus sensor for connection of CMC II sensors &; CMC III CAN bus access &< Up to 16 CAN bus systems may be connected Rittal Catalogue 34/IT infrastructure 447 CMC III Processing Unit Compact System overview Up to 4 CAN bus components are supported1) Mini USB: Programming cable 7030.080 is required for programming, see page 457 CMC III sensors for direct connection Internal infrared access sensor 0° CAN bus 1 CMC III CAN bus sensor as adaptor for CMC II sensors CMC III Processing Unit Compact Voltage supply 24 V (DC) and Redundant voltage supply 24 V (DC) Power packs, see page 457 CMC III CAN bus access with integral IR access sensor Alarm relay output: Changeover contact for safety extra-low voltage Ethernet 10/100 BaseT RJ 45 with PoE: Ethernet interface to IEEE 802.3 Over 10/100 BaseT full duplex 10/100 Mbit/s RJ 12/RS232 accessory modules: Display unit, ISDN unit, GSM unit External temperature sensor (included in the supply of PUC) Two integral digital inputs CMC III CAN bus unit Note: Server shutdown software for CMC III is required to shut down the server, see page 463 – + 24 V (DC)2) Interfaces unit for connecting CMC II accessories Connection for other products, see page 452 2) External 24 V (DC) supply via 7030.060 required Model No. 1) Depending on power supply/ connection combinations, see page 451 448 CMC III CAN bus unit 7030.030 Rittal Catalogue 34/IT infrastructure CMC III Processing Unit System overview CAN bus 1 Mini USB: Programming cable 7030.080 is required for programming, see page 457 CMC III sensors for direct connection 0° CMC III CAN bus sensor as adaptor for CMC II sensors Internal infrared access sensor SD card insert: for data logging CAN bus 2 CMC III Processing Unit CMC III CAN bus access with integral IR access sensor Voltage supply 24 V (DC) and redundant voltage supply 24 V (DC) Power packs, see page 457 Alarm relay output: Changeover contact for safety extra-low voltage Ethernet 10/100 BaseT RJ 45 with PoE: Ethernet interface to IEEE 802.3 via 10/100 BaseT full duplex 10/100 Mbit/s RJ 12/RS232 accessory modules: Display unit, ISDN unit, GSM unit External temperature sensor (included in the supply of PU) Up to 16 CAN bus systems are supported1) USB master for data logging and update 1) Depending on power supply/connection combinations, see page 451 Two integral digital inputs Up to 16 CAN bus systems are supported1) Control units CMC III CAN bus unit CMC III I/O unit CMC III power unit – + 2 24 V (DC)2) 1 Contains 1 8 digital inputs 2 and 4 relay outputs Functions: – Switching and measuring voltage, current, power and work – With two outputs – Also for the activation of fans Interfaces unit for connecting CMC II accessories Connection for other products, see page 452 2) Model No. CMC III I/O unit 7030.040 Rittal Catalogue 34/IT infrastructure External 24 V (DC) supply via 7030.060 required Model No. CMC III Power unit 7030.050 Model No. CMC III CAN bus unit 7030.030 449 CMC III Processing Unit/Compact System overview Page 448/449 Basic modules and connection accessories Page 451 ◾ Redundant voltage supply, plus Power over Ethernet (PoE) ◾ Simple wiring with CAN bus connection system (RJ 45) ◾ Connection to control roomsystems via OPC UA Material: – Plastic Protection category IP to IEC 60 529: – IP 30 Surface finish: – Front: Smooth – Enclosure: Textured Supply includes: – Basic system – Quick-start instructions – 4 mounting feet Colour: – Front: RAL 9005 – Enclosure: RAL 7035 W x H x D mm Operating temperature range Operating humidity range Approvals: – cULus Photo shows a configuration example with equipment not included in the scope of supply CMC III Processing Unit CMC III Processing Unit Compact 138 x 40 (1 U) x 120 + 12 (front assembly) 138 x 40 (1 U) x 120 + 12 (front assembly) 0°C…+45°C 0°C…+45°C 5 – 95 % relative humidity, non-condensing 5 – 95 % relative humidity, non-condensing Sensors/CAN bus connection units max. 32 max. 4 Max. overall cable length for CAN bus 2 x 50 m 1 x 50 m Model No. 7030.000 7030.010 Ethernet to IEEE 802.3 via 10/100BaseT with PoE Ethernet to IEEE 802.3 via 10/100BaseT with PoE Front USB interface Mini USB for system setting Mini USB for system setting Rear USB interface For USB stick for data records and SW updates up to 32 GB – Network interface (RJ 45) Interfaces Front SD-HC slot 1 x up to 32 GB for data recording – Rear serial RS232 (RJ 12) 1 x for the connection of display unit, GSM unit or ISDN unit 1 x for the connection of display unit, GSM unit or ISDN unit 2 x for max. 16 sensors each = 32 sensors in total (quantity restriction, see page 453) 1 x for max. 4 sensors (quantity restriction, see page 453) CAN bus (RJ 45) Inputs and outputs Digital inputs (terminal) 2 2 Relay output (terminal) Changeover contact max. 24 V (DC), 1 A Changeover contact max. 24 V (DC), 1 A 1 x acknowledgement button 1 x acknowledgement button 1 x service button 1 x service button Push-button Concealed reset button Operation/ signals Piezo signal generator LED display Protocols 1 x for the network status 1 x for the network status Ethernet TCP/IPv4, TCP/IPv6, SNMPv1, SNMPv2c, SNMPv3, Telnet, SSH, FTP, SFTP, HTTP, HTTPS, NTP, DHCP, DNS, SMTP, Syslog, LDAP 1 x for connecting CMC III power pack 1 x for connecting CMC III power pack 1 x for direct connection or for connecting CMC III power pack 1 x for direct connection or for connecting CMC III power pack Input 24 V DC (terminals) Time function User administration User interface Control room connection Integral sensors 450 1 x multi-colour OK/warning/alarm TCP/IPv4, TCP/IPv6, SNMPv1, SNMPv2c, SNMPv3, Telnet, SSH, FTP, SFTP, HTTP, HTTPS, NTP, DHCP, DNS, SMTP, Syslog, LDAP Power over Ethernet PoE Functions 1 1 x multi-colour OK/warning/alarm Rear LED Input 24 V DC (jack) Redundant power supply 1 Temperature sensor Access sensor 1 x 15.4 W 1 x 15.4 W Real-time clock, energy-buffered (24 h) without battery/accumulator, with NTP Real-time clock, energy-buffered (24 h) without battery/accumulator, with NTP LDAP LDAP Integral WEB server Integral WEB server Integral OPC UA server Integral OPC UA server NTC sensor with cable, supplied loose NTC sensor with cable, supplied loose Infrared technology in the enclosure front Infrared technology in the enclosure front Rittal Catalogue 34/IT infrastructure CMC III Sensors/accessories Control units for CMC III Processing Unit PU PU Model No. Compact Maximum quantity Page CMC III I/O Unit, 8 digital inputs + 4 relay outputs 7030.040 – 16 454 CMC III Power Unit, 1 input (C14) + 2 outputs (C13) 230 V, 50/60 Hz – For switching 10 A total current (fan/heater etc.) – For measuring current, voltage, power, energy 7030.050 – 16 454 Also required: – CAN bus connection cable 7030.090/.095, see page 457 – Mounting unit, 1 U, 7030.070, see page 458 CMC III sensors for direct connection PU PU Model No. Compact Maximum quantity Temperature sensor with external sensor 7030.110 4 32 Temperature/humidity sensor 7030.111 4 32 Infrared access sensor 7030.120 4 32 Vandalism sensor 7030.130 4 32 Analog airflow sensor 7030.140 4 101) Analog differential pressure sensor 7030.150 4 32 Universal sensor (2x digital input and 4 – 20 mA) 7030.190 4 32 1) Page 454 454 454 454 454 454 454 Max. 5 pieces for power supply with PoE Also required: – CAN bus connection cable 7030.090/.095, see page 457 Interface for CMC II sensors PU PU Model No. Compact Maximum quantity CMC III CAN bus sensor 7030.100 4 Page 32 – 455 455 455 455 455 473 473 460 For connecting the following products: 5 x access sensors (packs of 2), connect a max. of 5 in series 7320.530 ◾ ◾ 1 x smoke detector 7320.560 ◾ ◾ 1 x motion detector 7320.570 ◾ ◾ 1 x leakage sensor 7320.630 ◾ ◾ 1 x leakage sensor, with sensor length 15 m 7320.631 ◾ ◾ 1/3 x fire detector and extinguisher system DET-AC Plus with 3 messages 7338.120 ◾ ◾ 1/3 x early fire detector system DET-AC Plus with 3 messages 7338.220 ◾ ◾ 1/2 x door control system for one rack 7320.790 ◾ ◾ Also required: – CAN bus connection cable 7030.090/.095, see page 457 Rittal Catalogue 34/IT infrastructure 451 CMC III Accessories Access system The CAN bus access is designed for one door. It has an integral IR access sensor and may be connected to one handle system and one reader unit. PU PU Model No. Compact Maximum quantity Page 7030.200 2 161) – 7320.721 2 161) 455 1 x CMC III coded lock 7030.220 2 161) 1 x CMC III transponder reader 7030.230 2 161) 455 455 CMC III CAN bus access For connection to handle: 1 x TS 8 handle with master key function For connection to reader unit: 1) Max. 5 pieces for power supply with PoE Also required: – CAN bus connection cable 7030.090/.095, see page 457 Interface for PSM, PCU The products listed may be connected to the PU/PU Compact via CAN bus unit 7030.030, see page 456. PU PU Model No. Compact Maximum quantity CMC III CAN bus unit 7030.030 1 Page 4 456 412 412 412 411 411 411 411 411 411 For connecting the following products: 2 x 4 x Rittal Power Control Unit (PCU) 8-way 7200.001 ◾ ◾ 2 x 4 x Rittal Power Control Unit (PCU) C13 LED, 8-way 7859.225 ◾ ◾ 2 x 4 x Rittal Power Control Unit (PCU) C13/19 LED, 6-way 7859.235 ◾ ◾ 2 x 4 x PSM socket module C13, 8-way 7856.201 ◾ ◾ 2 x 4 x PSM socket module C13/earthing-pin, 6-way 7856.203 ◾ ◾ 2 x 4 x PSM socket module C13/19, 6-way 7856.204 ◾ ◾ 2 x 4 x PSM socket module C13/earthing-pin LED, 6-way 7859.212 ◾ ◾ 2 x 4 x PSM socket module C13 LED, 8-way 7859.222 ◾ ◾ 2 x 4 x PSM socket module C13/19 LED, 6-way 7859.232 ◾ ◾ Accessories: – Power supply unit 7030.060 and connection cable 7200.210, see page 457 – CAN bus connection cable 7030.090/.095, see page 457 – Mounting unit, 1 U, 7030.070, see page 458 452 Note: – Allow one power pack 7030.060 for every CMC III CAN bus unit Rittal Catalogue 34/IT infrastructure CMC III Accessories PSM and slave PDU for direct connection PU PU Model No. Compact Maximum quantity PSM measuring bars 16 A, with 2 infeeds 7859.050 4 8 PSM measuring bars 32 A, with 1 infeed 7859.053 4 8 PSM MID measuring module 16 A, with 2 infeeds 7859.312 4 8 PSM MID measuring module 32 A, with 2 infeeds 7859.332 4 8 Slave PDU international, managed, 16 A, 12 x C13 7955.901 3 6 Slave PDU international, managed, 16 A, 24 x C13, 4 x C19 7955.910 3 6 Slave PDU international, managed, 32 A, 24 x C13, 4 x C19 7955.911 3 6 Slave PDU international, managed, 16 A, 18 x C13, 3 x C19 7955.931 3 6 Slave PDU international, managed, 16 A, 24 x C13, 6 x C19 7955.932 3 6 Slave PDU international, managed, 32 A, 24 x C13, 6 x C19 7955.933 3 6 Slave PDU UK, managed, 13 A, 16 x UK 7955.940 3 6 Slave PDU UK, managed, 16 A, 16 x UK, 4 x C19 7955.941 3 6 Slave PDU UK, managed, 32 A, 16 x UK, 4 x C19 7955.942 3 6 Page 410 410 421 421 417 417 417 417 417 417 418 418 418 Accessories: – CAN bus connection cable 7030.090/.095, see page 457 Rittal Catalogue 34/IT infrastructure 453 CMC III Accessories CMC III control units/ CMC III sensors Material: – Plastic Colour: – Front: RAL 9005 – Enclosure: RAL 7035 Surface finish: – Front: Smooth – Enclosure: Textured Protection category IP to IEC 60 529: – IP 30 Connection RJ 45 2 x CAN bus Inputs Outputs Control unit I/O unit – Inputs for earth-free signals – Relay output (changeover contact) can handle loads of up to max. 24 V (DC)/1 A ◾ 8 x digital 4 x relays 7030.040 Control unit, power unit – Switches 2 outputs – Measures voltage, current, power, work – For controlling and switching fans, heaters, equipment ◾ 1 x voltage C14 110 – 230 V 50/60 Hz 2 x current C13 Aggregate current max. 10 A 7030.050 ◾ – – 7030.110 1 Temperature sensor – External NTC sensor, 2 m cable – Measurement range for external sensors: -40°C…+80°C ◾ – – 7030.111 1 Temperature/humidity sensor Measurement range: 0°C…+55°C/ 5 % relative humidity ... 95 % relative humidity Infrared access sensor Monitoring and reflector on the door, spacing adjustable ◾ – – 7030.120 Vandalism sensor – Axis: x, y, z – Acceleration limits: -7 – 7 g, adjustable ◾ – – 7030.130 Analog airflow sensor – External airflow sensor: 4 – 20 mA – Measurement range: 0.5 – 15 m/s – Application: Fan, filter, climate control devices ◾ – – 7030.140 Analog differential pressure sensor – 2 pressure measuring points (infeed via hose) – Measurement range: -500 m Pa – +500 m Pa – Application: Cold aisle containment, raised floor ◾ – – 7030.150 ◾ 2 x digital may be switched over to pulse input S0 or a Wiegand interface – 7030.190 Model No. CMC III IO Unit C NC NO C NC NO C NC NO C NC NO C 3 1 2 CMC III Power Unit C 2 1 3 C° C° 1 1 1 ∆P 1 1 454 2 Universal sensor Choice of digital inputs for an application: – Earth-free signals – S0 Input for energy measurement systems – 1 Wiegand interface (external access systems) 1 x analog 4 – 20 mA Rittal Catalogue 34/IT infrastructure CMC III Accessories Interface for CMC III sensors Connection RJ 45 2 x CAN bus Input RJ 12 Output RJ 12 ◾ 1x – 7030.100 – – 1x 7320.530 – – 1x 7320.560 – – 1x 7320.570 – – 1x 7320.630 – – 1x 7320.631 Model No. CMC III CAN Bus Sensor CAN bus sensor 1 1 For connecting one CMC II sensor 2 CMC II access sensor 2 3 3 3 4 3 – Sensor: Reed contact/magnet – Max. 5 reed contacts in series – 2 m cable included with the supply CMC II smoke detector Sensor: Visual 2 m cable included with the supply CMC II motion detector – Sensor: Infrared – 2 m cable included with the supply 3 5 CMC II leak sensor 6 – Sensor: Point infrared sensor – 2 m cable included with the supply 3 CMC II leak sensor 15 m – Sensor: 15 sensitive cables – 2 m cable included with the supply Access system Connection CMC III CAN Bus Access 1 1 Outputs RJ 45 2 x CAN bus RJ 12 Flat-pin connector RJ 12 Flat-pin connector ◾ 1x 1x – – 7030.200 – – – 1x – 7320.721 – – – – 1x 7030.220 7030.230 Model No. CAN bus access 2 3 – For connecting one handle and one reader unit for door monitoring – Integral IR access sensor Handles – TS 8 handle with master key function 2 Inputs – Handle monitoring – Rated voltage: 24 V (DC) – 3 m cable, 2 m extension cable included with the supply 4 3 CMC III reader units 5 – Coded lock – Transponder reader – Numerical code from 0 – 8 digits may be selected – Transponder technology: Mifare – 3 m cable included with the supply Rittal Catalogue 34/IT infrastructure 455 CMC III Accessories Interface for PSM, PCU Material: – Plastic Colour: – Front: RAL 9005 – Enclosure: RAL 7035 Surface finish: – Front: Smooth – Enclosure: Textured Protection category IP to IEC 60 529: – IP 30 Connection RJ 45 2 x CAN bus Model No. Inputs CMC III CAN Bus Unit C – + 3 2 CAN bus unit For connecting: – PSM socket strips – PCU 482.6 mm (19˝) socket strips CAN bus DRC For connecting: – RFID controller 7890.500 ◾ 2x for PSM, PCU, see page 452 For operating the required connection clamp for the 24 V power pack 7030.060 7030.030 ◾ Max. 1 x RFID controller, see page 462 Connection clamps for the 24 V power pack (optional) 7030.060 7030.550 1 CMC III CAN Bus DRC C – + 3 2 1 PSM – MID measuring module New see page 421 456 Rittal Catalogue 34/IT infrastructure CMC III Accessories Power supply unit Packs of Model No. for PU, PU Compact, CAN bus unit, CAN bus DRC, Door Control System. 1 pc(s). 7030.060 Technical specifications: – Input voltage: 100 – 240 V / 50/60 Hz – Output voltage: 24 V (DC)/2.5 A – Length of 24 V DC connection cable: 0.6 m Supply includes: – 4 mounting feet Also required: – Connection cable, see page 457 Accessories: – Mounting unit, see page 458 Programming cable Packs of Model No. For commissioning the Processing Unit (PU) or PU Compact. 1 pc(s). 7030.080 Supply includes: – CD with driver and system description CAN bus connection cable This can be used to connect the PU with the CAN bus sensors III, units III, control units III as a bus. Also for cabling the CAN bus sensors III, units III, control units III together. Connection cable/extension For connecting to: ◾ CMC III power pack C13 ◾ CMC III power unit C13 ◾ PCU C19 ◾ PDU C19 Technical specifications: – PVC cable, 3-pole, with IEC cable coupling (non-heating appliances) with contact protection CEE22 – Length: Minimum 1.8 m Rittal Catalogue 34/IT infrastructure CMC III CAN bus connection cable Length m Packs of Model No. RJ 45 0.5 1 pc(s). 7030.090 RJ 45 1 1 pc(s). 7030.091 RJ 45 1.5 1 pc(s). 7030.092 RJ 45 2 1 pc(s). 7030.093 RJ 45 3 1 pc(s). 7030.480 RJ 45 4 1 pc(s). 7030.490 RJ 45 5 1 pc(s). 7030.094 RJ 45 10 1 pc(s). 7030.095 Country Version Voltage Volt Packs of Model No. D/F/B/C13 230 1 pc(s). 7200.210 Non-heating appliance extension C13/C14 230/115 1 pc(s). 7200.215 Connection cable D/C19 230/115 1 pc(s). 7200.216 Connection cable C19/C20 230/115 1 pc(s). 7200.217 457 CMC III Accessories Extension cable RJ 12 with RJ 12 connector/jack To extend the cable connections to CMC II sensors. Length m Packs of Model No. 1 2 pc(s). 7320.814 Mounting unit, 1 U Packs of Model No. To accommodate ◾ PU ◾ PU Compact ◾ Control units ◾ CMC III CAN bus unit ◾ CMC III CAN bus DRC ◾ CMC III power pack Can accommodate up to 3 units and is attached to the 482.6 mm (19˝) frame. 1 pc(s). 7030.070 Accessories: – Cable clamp strap 7610.000, see page 458 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – 2 blanking covers Cable clamp strap Packs of Model No. For rear attachment on the mounting unit. 1 pc(s). 7610.000 Material: – Sheet steel, 2 mm Surface finish: – Zinc-plated Supply includes: – Assembly parts Mounting unit Packs of Model No. To accommodate ◾ PU ◾ PU Compact ◾ Control units ◾ CMC III CAN bus unit ◾ CMC III CAN bus DRC ◾ CMC III power pack Can accommodate one unit and is mounted on the enclosure frame. 1 pc(s). 7030.071 Material: – Sheet steel Surface finish: – Zinc-plated 458 Rittal Catalogue 34/IT infrastructure Door control system Door control system ◾ Automation adjustable via CMC ◾ Manual and automatic door opening ◾ Automatic opening in case of power failure Note: To be connected at rear: – Door kit 2 door kits and 2 door kit extensions for LCP may be connected to one door control module – Door comfort handle or door switch Up to 2 door comfort handles/door switches may be connected for manual opening – Automatic door opening is achieved by connecting to the PU/PU Compact. Independently of this, the doors may be opened via the door comfort handle/door switch – In the event of a power failure, the doors will also open – Door kit extension for LCP must be backed up with a UPS – The front and rear door must always be opened Also required: – CMC III processing unit/compact, see page 450 – CAN bus sensor, see page 451 System diagram Door control system: ◾ A maximum of 16 door control systems per processing unit ◾ A maximum of 2 door control systems may be connected per processing unit CMC III – Processing Unit – Processing Unit Compact CAN bus sensor Door control module 1 Door kit Door comfort handles Door kit extension for LCP min. 800 mm enclosure depth 2 3 4 Rittal Catalogue 34/IT infrastructure 459 Door control system Accessories Door control module Model No. 7320.790 To activate up to 2 door kits and 2 door kit extensions for LCP. There is 1 control channel available per 2 door kits (magnets/spindel motor). There is optionally a normally-closed contact integrated for each door output, which is used to connect the automatic door switch, door comfort handle or a customer-specific system (e.g. room extinguisher system). Packs of 1 pc(s). Rated voltage 24 V (DC) Outputs door kit/ door kit extension for LCP 2 x 24 V (DC) Ports for CMC III CAN bus sensor 2 x RJ 12 Normally closed contacts Connection must be designed for 30 V (DC)/1 A Technical specifications: – W x H x D mm: 136 x 44 (1 U) x 129 Operating temperature range +5°C…+45°C Operating humidity range 5 – 95% relative humidity, non-condensing Protection category IP to IEC 60 529 IP 40 Also required: – Power supply unit 230 V, 2 pc(s), see page 457 – Connection cable, 2 pc(s), see page 457 – CAN bus sensor 7030.100, 2 pc(s), see page 451 Door kit for TS-IT To open the door in an emergency situation. Connection and activation via door control module. ◾ For standard door TS-IT. With gas pressure damper system. The doors are held closed by a magnet system. ◾ For climate control applications with Liquid Cooling Package (LCP). With spindle motor. Due to high negative pressures, a spindle motor for every door is attached to the TS-IT roof plate. Also required: – For 7030.250: Tubular door frame, see page 549 Version Packs of Model No. TS-IT, 1-piece door 1 pc(s). 7030.240 TS-IT, 2-piece door 1 pc(s). 7030.250 TS-IT, extension for LCP 2 pc(s). 7030.260 Supply includes: Door kit TS-IT: – Gas pressure damper – Cable harness – Magnetic lock – Assembly parts Door kit extension for LCP – Spindle motor – Assembly parts Door comfort handle Packs of Model No. with door opener function By actuating the lock mechanism, the door is released via the automatic door opening system. Prepared for the installation of standard commercially available semi-cylinders, 40 mm, and SZ lock and push-button inserts. Length: 302 mm. 1 pc(s). 7320.794 Technical specifications: – Rated voltage: 24 V (DC) – Rated current: max. 3 A – Connection cable: Length 3 m – Operating temperature range: +5°C…+40°C Also required: – Handle adaptor for mounting on glazed door 8611.080, see page 549 Accessories: – Lock and push-button inserts, see page 565 Colour: – RAL 7035 Door switch Packs of Model No. Switch with normally-closed contact for door control module 7320.790, for manual door opening. It is mounted on the 25 mm pitch pattern of the TS 8 frame section. 1 pc(s). 7320.793 Technical specifications: – Installation: Ø 16.2 mm – 250 V/2 A 460 Supply includes: – 3 m connection cable – Mounting bracket – Assembly parts Rittal Catalogue 34/IT infrastructure Monitor/keyboard unit Accessories Monitor/keyboard unit, 1 U with 17˝ TFT display and VGA/DVI connection Benefits: ◾ With digital and analog interfaces, VGA, DVI-D, PS/2, USB ◾ Simple, one-man installation ◾ Optionally with integrated KVM switch for up to 8 servers Technical design: – 432 mm/17˝ TFT display – Physical resolution: 1280 x 1024 – Format: 4 : 3 – Colours: 16.7 million – Brightness: approx. 350 cd/m2 (typ.) – Contrast ratio: approx. 1000 : 1 – Mains voltage: 100 – 240 V/50 – 60 Hz – Ambient temperature: +5°C…+45°C (operation) – Max. power consumption in operation, without optional KVM system: 32 W – Max. power consumption with closed monitor unit, without optional KVM system: < 1 W – Rear connections: Mains voltage, VGA, DVI, PS/2, USB, power supply for KVM – Lockable at the front – Cables are safely routed in the energy chain Accessories: – For monitoring several servers: KVM switch, see page 461 Width Height U Depth mm Installation depth mm Packs of Colour RAL 7035 482.6 mm/ 19˝ 1 680 680 – 850 1 pc(s). RAL 9005 KVM switch SSC view 8 USB For rear attachment on the monitor/keyboard unit. The SSC view 8 USB may be operated with up to 8 servers. It is operated via the monitor/keyboard unit with an OSD menu or hotkeys. Technical specifications: – Server/console connections Video: VGA/HD15 Keyboard/mouse: PS/2 or USB – Max. video resolution: 1280 x 1024 at 85 Hz – Bandwidth: 200 MHz – Power consumption: 10 W – W x H x D: 482.6 x 44 x 140 mm – Voltage supply: 12 V (DC) via MTE Protection category IP to IEC 60 529: – IP 20 SSC view 8 USB Keyboard Model No. German 9055.310 English 9055.312 German 9055.410 English 9055.412 Packs of Model No. 1 pc(s). 7552.002 Connection cable for server/VGA Length m Packs of Model No. PS/2 2 1 pc(s). 7552.120 PS/2 4 1 pc(s). 7552.140 USB 2 1 pc(s). 7552.122 USB 5 1 pc(s). 7552.142 Also required: – Monitor/keyboard unit, see page 461 Colour: – RAL 9006 Rittal Catalogue 34/IT infrastructure 461 Dynamic Rack Control Accessories RFID aerial U Packs of Model No. for TS-IT For insertion into the 482.6 mm (19˝) section of the TS-IT. Position detection of the components is accurate to within 1/3 U, therefore there are 3 aerial elements and signalling LEDs integrated into each U. Reading and writing of the RFID tags is likewise signalled by one LED in each case. 42 1 pc(s). 7890.242 47 1 pc(s). 7890.247 Also required: – RFID controller 7890.500, see page 462 – RFID tags 7890.020, see page 462 Supply includes: – Assembly parts RFID tags Packs of Model No. 1 RFID tag is required for each component. Each tag has a “Unique ID” (UID, not sequential), which cannot be altered; all other data is stored on the tag in conformity with ISO 15693. The tag is stuck to the inside right of the 482.6 mm (19˝) mounting bracket using its adhesive surface. The component is later screw-fastened to the 482.6 mm (19˝) level, including the tag. 20 pc(s). 7890.020 RFID controller Packs of Model No. Connects the RFID aerial to the CAN bus DRC. In this way, the CMC is able to notify automatic changes, graphically depict the enclosure with the built-in components, and list capacity management. One RFID controller is required per rack/aerial. 1 pc(s). 7890.500 Technical specifications: – Type: passive, writable – Frequency: 13.56 MHz Connections: – RJ 45 jack for a maximum of one CAN bus DRC – Mini-DIN for a maximum of one RFID aerial Also required: – CAN bus cable, see page 457 – CMC III, CAN bus DRC, see page 462 – Attachment Supply includes: – Nylon loop tapes for attachment CMC III CAN bus DRC Packs of Model No. For connecting an RFID controller 7890.500 to the PU/PU Compact. 4 CAN bus DRCs may be connected to the processing unit, or 2 to the processing unit compact. 1 pc(s). 7030.550 Also required: – CAN bus connection cable, see page 457 – Mounting unit, 1 U, 7030.070, see page 458 462 Rittal Catalogue 34/IT infrastructure IT management software RiZone Appliance Standard RiZone is supplied as a hardware or software appliance. Note: – Both appliances support communication with Rittal devices and devices from third-party manufacturers via an integral MIB browser As a hardware appliance, RiZone is supplied with global support, installed on a powerful 1 U server. The software appliance is available as a virtual server which can easily be used on existing hardware in the data centre. – RiZone Appliance IP node licence according to the number of IP nodes available. Also required: Standard version Hardware Software appliance1) 1) Model No. Server with Windows RiZone software 7990.101 7990.201 7990.301 Hard drive + Windows RiZone software RiZone graphics tool 7990.103 7990.203 7990.303 appliance1) RiZone graphics tool All Model Nos. on the same line belong together, and must always be ordered together RiZone Appliance IP node licence The flexible RiZone licence model allows optimum adaptation to any project size, while at the same time allowing the opportunity to grow with the data centre. The volume licences for the IP nodes are graduated from 25 to 100 nodes and may be adapted precisely to the size of the data centre. For each active component or other SNMP-compatible component to be covered, one node licence is required. Server shutdown software for CMC III Client software to control the server shutdown via CMC III. The software supports all common operating systems and versions (e.g. Windows 7, VISTA, XP, Server 2003/2008, UNIX/LINUX and VMWARE Sphere/ESX Server, CITRIX XEN etc). One licence is required for each server to be shut down on an event-controlled basis. Rittal Catalogue 34/IT infrastructure For number of IP nodes1) 1) Model No. Console licences included RiZone software RiZone graphics tool 25 4 7990.206 7990.306 100 8 7990.208 7990.308 All Model Nos. on the same line belong together, and must always be ordered together Licences Model No. Single licence 7857.421 Note: – Software updates and a complete list of currently supported operating systems may be found at www.rittal.com 463 1 2 464 Rittal Catalogue 34/IT infrastructure IT security solutions Micro Data Centre Level E ......................................................................................................466 Level B .......................................................................................................467 Level A .......................................................................................................468 Compact split cooling solution ....................................................................469 Outdoor split cooling solution .....................................................................470 Outdoor split cooling solution with inverter technology................................471 Data Centre Container Data Centre Container DCC .......................................................................472 Fire alarm and extinguisher system Fire alarm and extinguisher system DET-AC/EFD Plus ................................473 Security rooms Security rooms ...........................................................................................474 Your benefits ◾ ◾ ◾ ◾ ◾ Simple, flexible integration into existing building structures Extendible for permanent cost-effectiveness and future-proofing Optimum space utilisation, due to the flexible modular system System-tested protection from potential physical threats Compatible with cross-plant IT infrastructures 3 Sample applications Micro Data Centre, Level E with climate control, see page 466 Micro Data Centre, Level A, see page 468 Micro Data Centre, Level B as compact data centre, see page 467 Rittal Catalogue 34/IT infrastructure 465 Micro Data Centre System accessories Page 507 Material: – Sheet steel, coated Colour: – Enclosure and service door: RAL 7035 – Operator door: RAL 9005 Protection category IP to IEC 60 529: – IP 56 0 T3 B1 60 Supply includes: – Micro Data Centre with operator door and service door – Cable entry in both side elements – Both doors with key lock Optional: – Choice of door hinges – Bifold doors – Different cable entry systems – Cable entry additionally in the top or base unit – Different lock variants – Supporting structure 6 10 T1 10 T2 H1 Benefits: ◾ As well as facilitating installation in poorly accessible sites, the modular design also makes it possible to retrospectively enclose existing IT structures ◾ Extendibility, dismantling and re-assembly mean targeted, future-safe investments ◾ Tested security – testing has been carried out by accredited institutes and confirmed with test reports Protection standards: – Fire protection category F 90 to DIN 4102 Part 2 – Compliance with limits ΔT < 50 K, rel. humidity < 85%, over 30 minutes – Burglar resistance WK II, III and IV, tool attack analogous to DIN V ENV 1630/1999-04/ WK II – Smoke protection based on DIN 18 095-2: 1991-03 H2 Applications: ◾ A high level of protection against potential physical threats for IT ◾ Targeted configuration components complete it to a Micro Data Centre B2 Note: – The Micro Data Centre is configured on a project-specific basis Technical details: Available on the Internet Level E Units U External dimensions mm Internal dimensions mm 42 47 42 47 Width (B1) 1100 1100 1100 1100 Height (H1) 2210 2410 2210 2410 Depth (T1) 1200 1200 1400 1400 Depth (T3) 3320 3320 3520 3520 Width (B2) 920 920 920 920 Height (H2) 2030 2230 2030 2230 Depth (T2) Model No. Empty weight excluding cooling unit and excluding rack approx. kg 1000 1000 1200 1200 7999.009 7999.009 7999.009 7999.009 660 700 730 800 Page Accessories Network/server enclosures TS-IT see page see page see page see page 86 Fire alarm and extinguisher system DET-AC/EFD Plus see page see page see page see page 473 CMC monitoring system see page see page see page see page 446 PSM – Power System Module busbar see page see page see page see page 409 416 PDU – Power Distribution Unit see page see page see page see page Climate control for micro data centre from page from page from page from page 469 LCP – Liquid Cooling Package, rack depth 1000 mm see page see page see page see page 428 Standard protection from: Fire 466 Extinguishing water Corrosive gases Vandalism Unauthorised access Dust Theft/burglary Rittal Catalogue 34/IT infrastructure Micro Data Centre System accessories Page 507 Material: – Sheet steel, coated Colour: – Enclosure and rear door: RAL 7035 – Operator door: RAL 9005 Protection category IP to IEC 60 529: – IP 56 Supply includes: Material: – Micro Data Centre with integral Pladur® plate TS 8 frame Colour: – Front and rear 482.6 mm (19˝) – level Enclosure and rear door: RAL 7035air baffle plates – Adjusted – RALis9005 – Operator Every sidedoor: element prepared for one cable entry at the botSupply includes: cableTSentry at the – tom Safeand withone integral 8 frame – top Cable duct in both side ele– Operator ments and service door with handle and semi– swing-lever Operator and service door with cylinder swing-lever handle and semicylinder Optional: – Choice of door hinges – Bifold doors – Different cable entry systems – Cable entry additionally in the top and base element – Different lock variants – Supporting structure with fire protection T3T3 1 TT1 BB 11 T2T2 H1 H1 Protection standards: – Fire protection –F fire resistance 90 to EN 1363 class EI 90/F to 4102 DIN EN and based on90 DIN 1999 based – 1363-1: Theft protection RC 2on based on DIN 4102-2: 1977 EN 1630 – Burglar resistance RC 2, on Acrid gas-tightness based tool attack analogous to EN 1634 EN 1630/2011-09/RC – DIN Protection category IP 56 to2 – Smoke protection based on EN 60 529 DIN EN 18 1634-3: 2005-01 H2 H2 Applications: ◾ Basic protection against potenBasic protection against potential tial physical for IT comphysical threatsthreats for IT compoponents. Targeted configuranents. Targeted configuration tion components complete it to components transform the safe Data Centre intoa aMicro complete, compact data centre. Benefits: ◾ Modular layout for installation Benefits: locations ◾ in TShard-to-access 8 frame with protection ◾ Lower weight than the Level E standards ◾ Tested – testing has Modularsecurity assembly carried out by accredited ◾ been Low weight andentry confirmed with ◾ institutes Easier cable ◾ test Fast reports assembly BB 22 Note: – The Micro Data Centre is configured on a project-specific basis Technical details: Available on the Internet Level B Units U External dimensions mm Internal dimensions mm 42 47 42 47 Width (B1) 1115 1115 1115 1115 Height (H1) 2205 2405 2205 2405 Depth (T1) 1377 1377 1577 1577 Depth (T3) 3274 3274 3474 3474 Width (B2) 905 905 905 905 Height (H2) 2000 2200 2000 2200 Depth (T2) Page 1060 1060 1260 1260 7999.709 7999.709 7999.709 7999.709 595 630 660 700 Fire alarm and extinguisher system DET-AC/EFD Plus see page see page see page see page CMC monitoring system see page see page see page see page 446 PSM – Power System Module busbar see page see page see page see page 409 416 Model No. Empty weight excluding cooling unit approx. kg Accessories 473 PDU – Power Distribution Unit see page see page see page see page Climate control for micro data centre from page from page from page from page 469 LCP – Liquid Cooling Package, rack depth 1000 mm see page see page see page see page 428 Standard protection from: Fire Extinguishing water Rittal Catalogue 34/IT infrastructure Corrosive gases Vandalism Unauthorised access Dust Theft/burglary 467 Micro Data Centre System accessories Page 507 Material: – Sheet steel, coated Colour: – Enclosure and service door: RAL 7035 – Operator door: RAL 9005 Protection category IP to IEC 60 529: – IP 55 T3 Supply includes: – Security enclosure with operating and service doors (threepoint locking) – Cable entry in both side elements – Cooling 2.4 kW designed as a split unit T2 B2 H1 Benefits: ◾ Complete system with built-in cooling and 482.6 mm (19˝) rack ◾ High level of operational and service-friendliness thanks to the two-door system ◾ Compatibility with other infrastructure elements ◾ Tested security – testing has been carried out by accredited institutes and confirmed with test reports Protection standards: – Fire protection category F 90 to DIN 4102 Part 2, compliance with limits ΔT < 50 K, rel. humidity < 85 % over 10 minutes – Burglar protection WK II, tool attack analogous to DIN V ENV 1630/1999-04/ WK II H2 Applications: ◾ Protection for server and storage applications ◾ Protection for business-critical data ◾ Storage of personal data, e.g. doctors’ surgeries or tax advisors Technical details: Available on the Internet B1 T1 Level A Units U 15 Cooling output W Page 2400 External dimensions mm Internal dimensions mm Width (B1) 806 Height (H1) 1699 Depth (T1) 1270 Depth (T3) 2746 Width (B2) 620 Height (H2) 827 Depth (T2) 1024 Weight excluding internal fittings, including climate control unit approx. kg 360 Model No. Micro data centre with built-in 482.6 mm (19˝) rack 7999.999 Model No. Micro data centre without built-in 482.6 mm (19˝) rack 7999.898 Accessories 482.6 mm (19˝) rack, 15 U, depth 1000 mm 7995.992 Fire alarm and extinguisher system DET-AC/EFD Plus see page 473 CMC monitoring system see page 446 PDU – Power Distribution Unit see page 416 Standard protection from: Fire 468 Extinguishing water Vandalism Unauthorised access Dust Theft/burglary Rittal Catalogue 34/IT infrastructure Micro Data Centre System accessories Page 507 Micro Data Centre Page 466/467 ◾ Separate, hermetically sealed internal and external circuits ◾ Dust and flue gases are unable to ingress ◾ The internal and external unit are connected to one another via refrigerant lines and control cables and shielded for fire protection ◾ Air routing in the Micro Data Centre is horizontal. Modified air baffle plates ensure targeted air routing. By separating the “cold side” from the “hot side”, air short-circuits are avoided, and the efficiency of cooling is enhanced. ◾ Suitable for use in rooms with climate control in the building or adequate ventilation, and low or no noise level requirements. The evaporator coil is fastened to the side panel on the inside of the Micro Data Centre, and the external device on the service door. 4 5 1 3 Colour: – RAL 7035 Protection category IP to IEC 60 529: – External circuit IP 54 – Internal circuit IP 24 Supply includes: – Internal unit – External unit – Refrigerant lines – Data and supply lines 2 Flexible refrigerant lines inlet/ return Power supply Data cable External unit Internal unit Compact split cooling solution Model No. Rated operating voltage V, ~, Hz External unit Internal unit 3126.230 3126.240 400/460, 3~, 50/60 400/460, 3~, 50/60 Width mm 500 500 Height mm 1580 1580 Depth mm 231 231 Width mm 804 804 Height mm 1544 1544 100 100 Cooling output 50/60 Hz L35 L35 W Depth mm 2500/3090 4000/4010 Cooling output 50/60 Hz L35 L50 W 2070/2300 3020/3250 Rated max. current A 3.3/3.5 4.1/4.8 Start-up current A 14.2/14.7 15.2/15.8 Pre-fuse A 6.3 – 10.0 6.3 – 10.0 Motor circuit-breaker ◾ ◾ Power consumption Pel 50/60 Hz L35 L35 W 1275/1615 1620/2125 Power consumption Pel 50/60 Hz L35 L50 W 1525/1920 1825/2835 Refrigeration factor ɛ = K/Pel L35 L35 Refrigerant g Permissible operating pressure (p. max.) bar 2,0 2,5 R134a,1500 R134a, 2900 28 25 Temperature range +20°C…+55°C +20°C…+55°C Setting range +20°C…+55°C +20°C…+55°C < 70 < 72 External unit 65 65 Internal unit 70 70 Noise level dB (A) Weight kg Temperature control Rittal Catalogue 34/IT infrastructure Comfort controller (factory setting +25°C) 469 Micro Data Centre System accessories Page 507 Micro Data Centre Page 466/467 ◾ The internal circuit of the cooling unit is secured to the side panel inside the Micro Data Centre. The external unit is positioned outside of the building. The internal and external units are connected to one another via refrigerant lines and control cables. ◾ The hot air from the servers is drawn in at the rear, and the cooled air is expelled in front of the 482.6 mm (19˝) level. The waste heat is routed directly to the outside. As a result, room ventilation or airconditioning is not necessary. Colour: – RAL 7035 4 2 5 4 5 1 3 4 Supply includes: – Internal unit – External unit – Refrigerant lines – Data and supply cables Copper pipe inlet/return Power supply Data cable External unit Internal unit Outdoor split cooling solution Model No. 7999.963 7999.965 7999.964 Redundancy – – ◾ ◾ 230, 50, 1~ 400, 50, 3~ 230, 50, 1~ (2 x) 400, 50, 3~ (2 x) Width mm 795 900 795 900 Height mm 610 680 610 680 Depth mm 290 340 260 340 Width mm 1020 1020 1020 1020 Height mm 1500 1500 1500 1500 Depth mm 100 100 100 100 2400 5000 2400 5000 Rated current per unit, max. A 3,8 4,1 3,8 4,1 Start-up current per unit A 19,5 35 19,5 35 16 3 x 16 16 (2 x) 3 x 16 (2 x) Rated operating voltage V, ~, Hz External unit Internal unit Cooling output 50/60 Hz L35 L35 W Pre-fuse A Refrigerant 7999.966 R410 a R410 a R410 a R410 a -15°C…+35°C -15°C…+35°C -15°C…+35°C -15°C…+35°C External unit 38 74 2 x 38 2 x 74 Internal unit 59 59 63 66 Refrigerant line incl. electric control cable for 2400 W, length 20 m 7999.961 – 7999.961 – Refrigerant line incl. electric control cable for 5000 W, length 20 m – 7999.962 – 7999.962 Temperature range Weight kg Accessories 470 Rittal Catalogue 34/IT infrastructure Micro Data Centre System accessories Page 507 XXX Micro Data Centre Page 466/467 ◾ The Demand-based control cooling unit speed with inverter of the compressor. The refrigtechnology allows targeted erant via speedvolume controlisofregulated the compresthe expansion valve. sor. electronic The refrigerant volume is ◾ Energy savings up to 40%. regulated via theofelectronic The cold airvalve. is expelled in front expansion Adaptation to of the 482.6 mm (19˝) facililevel by cooling requirements the (evaporator tatesinternal energyunit savings of up to coil), is drawn 40 %.while The the coldhot air air is expelled in at theofrear. front the 482.6 mm (19˝) level by the internal unit (evapColour: orator coil), while the hot air is – RAL 7035 drawn in at the rear. Supply includes: – Internal unit – External unit – Refrigerant lines – Data and supply cables 7 7 8 1 2 3 4 Copper pipe inlet/return 5 Power supply cable Data Copper pipe inlet/return Power supply Data cable 6 Control box Operating unit Changeover Control box box Operating unit External unit Internal unit External unit Internal unit Changeover box Split outdoor cooling solution with inverter technology Model No. 7999.991 Redundancy – ◾ 230, 50, 1~ 230, 50, 1~ (2 x) Width mm 900 900 Height mm 795 795 Depth mm 320 320 (2 x) Rated operating voltage V, ~, Hz External unit Internal unit 7999.992 Width mm 804 804 Height mm 1544 1544 100 100 Cooling output 50 Hz L181) L35 W Depth mm 7850 7850 Cooling output 50 Hz L18 L43 W 7030 7030 Rated max. current A 13,9 13.9 (2 x) Start-up current A 36 36 (2 x) Pre-fuse A 25 25 (2 x) Refrigerant R410 a R410 a -15°C…+43°C -15°C…+43°C Temperature range Noise level dB (A) Weight kg 48…49 48…49 External unit 63 63 (2 x) Internal unit 70 70 (2 x) 3126.270 3126.2702) Also required Heat exchanger (evaporator coil) 1) 2) Server inlet temperature 2 heat exchangers are required Rittal Catalogue 34/IT infrastructure 471 Data Centre Container System accessories Page 507 Fire protection: – Fire protection, internal panels: F30, optionally F90 based on DIN 4102/EN1363, component-tested Duct system: – Type: Hard duct DN200 – Dimensions of packing space: 120 x 120 mm – Protected cable/tube entries Raised floor: – Optimised load distribution – Equipped with cable/tube routing – Variable ventilation panels with DFC Climate control: – Customised climate control variants – Targeted cooling via aisle containment – Energy-efficient DFC cooling (direct free cooling), with no additional external units – Powerful LCP cooling (liquid cooling package), with minimal space requirements Customised solutions: – Interlinked containers, other climate control variants Optional: – Up to seven TS-IT racks with power supply – Fire alarm/extinguisher system (Novec 1230) – Access systems, access door (keyboard, code card) – Monitoring and management (CMC, RiZone) for monitoring alarm, maintenance messages and customer-specific parameters Power distribution: – Infeed: CEE connector 125 A, 3-phase/N/PE, 400 V/50 Hz – Busbar system for rack-based power distribution Type 1 2 3 4 Width mm 5 Note: – Standard range of models with pre-configured data centre types – The Data Centre Container is configured on a project-specific basis Technical details: Available on the Internet Photo shows a configuration example with equipment not included in the scope of supply 6 7 8 9 3000 Height mm 3250 Depth mm 6058 8000 10000 11500 6058 8000 10000 11500 9500 Useful area m2 15.2 20.4 25.7 29.7 15.2 20.4 25.7 29.7 20.4 LCP Model No. Climate control, Direct Free Cooling/Liquid Cooling Packages 7857.998 DFC DFC DFC DFC LCP LCP LCP LCP Max. cooling output kW 20 20 50 50 20 40 80 100 40 Redundancy cooling n+1 n+1 n+1 n+1 n+1 n+1 n+1 n+1 n+1 Heavy-duty raised floor ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ Plug-and-play power distribution ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ Hard ducts DN200 3 3 4 4 4 5 5 5 5 Security door, resistance class 2 ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ Optional fittings DET-AC XL fire alarm/extinguisher system ◾ ◾ ◾ ◾ UPS (uninterruptible power supply) ◽ ◽ ◽ ◽ Max. no. of racks 42 U (600 mm wide) without UPS 6 9 10 12 6 8 11 13 8 Max. no. of racks 42 U (800 mm wide) without UPS 4 6 7 9 4 6 8 9 6 Higher racks (47 U) ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ ◽ Rack power supply Monitoring package (CMC III) RiZone package Security door, resistance class 3 Additional hard ducts for cable/pipe entry Metal sun shade Standard ◽ Option 472 Rittal Catalogue 34/IT infrastructure Fire alarm and extinguisher system DET-AC/EFD Plus System accessories Page 507 Network/server enclosures Page 90 Benefits: ◾ Early fire detection ◾ Automatic extinguishing – Innovative extinguisher gas NOVEC 1230 – Eco-friendly – Uncritical for IT components ◾ 482.6 mm (19˝) rack mount with just 1 U Colour: – RAL 7035 Width mm DET-AC Plus Compact fire alarm and active extinguisher system with smoke extraction system, built into one height unit. The detection system is identical to that used in the EFD Plus system. Fire extinguishing with the extinguisher gas NOVEC 1230 is automatically activated when a main alarm is triggered. With the extinguisher gas supply provided, a volume of up to 3 m3 can be extinguished. The collective fault signal and the alarms may be forwarded to the CMC. DET-AC Plus slave In conjunction with the DET-AC Plus slave system, up to five bayed enclosures may be extinguished. In addition to the DET-AC Plus unit, each additional enclosure requires a DET-AC Plus slave unit, which contains the extinguisher gas for one enclosure. The pipework from the DET-AC Plus system is laid in all enclosures to facilitate detection. EFD Plus Compact early fire detection system with active smoke extraction system. The integral fan continuously extracts the air from the enclosure, and passes it over two smoke detectors. The first smoke detector is extremely sensitive and triggers a pre-alarm. The second smoke detector triggers the main alarm. Photo shows a configuration example with equipment not included in the scope of supply. Fire alarm and extinguisher system DET-AC Plus Additional unit DET-AC Plus slave Early fire detection system EFD Plus 482.6 (19˝ rack mount) 482.6 (19˝ rack mount) 482.6 (19˝ rack mount) Height mm 44 (1 U) 44 (1 U) 44 (1 U) Depth mm 640 570 500 Weight, approx. kg 15 12 8 7338.120 7338.320 7338.220 Model No. Protection category IP to IEC 60 529 Ambient temperature (operation) Battery storage Rated operating voltage V, ~, Hz Uninterruptible mains electricity operation IP 20 IP 20 IP 20 +10°C…+35°C +10°C…+35°C +10°C…+35°C -15°C…+40°C -15°C…+40°C -15°C…+40°C 100/240, 1~, 50/60 24 (DC) 100/240, 1~, 50/60 2 x 12 V; 2.2 A/approx. 4 h 2 x 12 V; 2.2 A/approx. 4 h 2 x 12 V; 2.2 A/approx. 4 h 3 x RJ 12, alternatively 3 x relays, max. 24 V DC/0.5 A 3 x RJ 12, alternatively 3 x relays, max. 24 V DC/0.5 A 3 x RJ 12, alternatively 3 x relays, max. 24 V DC/0.5 A Sensors 2 different scattered-light sensors – 2 different scattered-light sensors Display LCD display with plain text information – LCD display with plain text information No. of slave modules max. 4 – max. 5 No. of monitored enclosures max. 5 – max. 5 NOVEC 1230 NOVEC 1230 – 3,2 3,2 – 3 3 – Pipe kit 7338.130 7338.130 7338.130 Page RJ 12 cable for alarm relaying to CMC, packs of 2 7320.8141) 7320.8141) 7320.8141) 458 Access sensors 7320.530 7320.530 – – – 5501.480 455 687 Connections Extinguisher gas Extinguisher gas fill volume kg Admissible max. protection volume m3 Also required Depth-variable slide rails 1) 2 packs are required. Rittal Catalogue 34/IT infrastructure 473 Security rooms System accessories Page 507 Network/server enclosures Page 90 The basic protection room The basic protection room provides a high-quality, system-tested solution. The basic protection room is an optimum, modular room-within-aroom solution for protecting IT/infrastructure components such as extinguisher systems, uninterruptible power supplies and climate control. The flexible modular system means that it can be extended whilst the IT systems are operational. Criterion System testing Benefits: ◾ System-tested protection levels ◾ Multi-functional risk coverage ◾ Dust- and noise-reduced installation ◾ Dismantling and reassembly plus extendibility = investment security ◾ May be adapted for use in other room systems, such as the High Availability room Standards Testing the following standards as a complete system or construction ECB·S certification to EN 1047-2, 50 K temperature increase and 85% rel. humidity for up to 24 hours (reheating period), flame impingement time 60 minutes Fire protection 50 K temperature increase and 85% rel. humidity without reheating period, flame impingement time 30 minutes F 120 to DIN 4102 F 90 to DIN 4102 Corrosive fire gases Acrid gas-tightness based on DIN 18 095 Falling debris Impact test at 200 kg Water Dust IP X6 to IEC 60 529 Protection from standing water IP 5X to IEC 60 529 WK IV to DIN V ENV 1630, door system only Unauthorised access WK III to DIN V ENV 1630, or DIN V 18 103 (ET2) WK II to DIN V ENV 1630 Explosion Detonation test EMC Protection from high-frequency irradiation and radiation System-tested structures are tested as a complete construction, comprising the cell structure and built-in modules such as doors, cable shields or ventilation units. By contrast, generic component testing only refers to individual parts. Conventional construction methods refer to room structures made of plasterboard, concrete and other standard construction materials which do not offer sufficient protection for data centre applications. Conventional construction methods are generally unsuitable for use as a fire wall and are therefore only subjected to component testing. 474 Rittal Catalogue 34/IT infrastructure Security rooms System accessories Page 507 Network/server enclosures Page 90 The High Availability room The High Availability room offers maximum physical protection for data centres and IT system locations. The system was certified by ESSA (European Security Systems Association) to ECB·S regulations. This certification confirms that the High Availability room meets the requirements of EN 1047-2 without restriction. Moreover, the construction of the security room is subject to continuous quality monitoring by an independent agent. Benefits: ◾ System-tested High Availability protection ◾ Multi-functional risk coverage ◾ Dust- and noise-reduced installation ◾ Dismantling and reassembly plus extendibility = investment security ◾ ECB·S certification ◾ Independent quality monitoring ◾ May be adapted for use in other room systems, such as the basic protection room Basic protection room High Availability room ◾ ◾ – ◾ ◽ – – ◾ ◾ – ◾ ◾ ◾ ◾ ◾ ◾ – ◾ ◾ ◾ – ◾ ◽ ◾ ◾ – – ◾ ◾ ◾ ◾ Standard ◽ Optional Rittal Catalogue 34/IT infrastructure 475 476 Rittal Catalogue 34/Software & services Software & services Engineering tools Planning and project management .............................................................480 Design, calculation, verification ...................................................................482 Components and system technology..........................................................484 Virtual enclosure assembly..........................................................................486 Enclosure machining...................................................................................488 Documentation ...........................................................................................490 Benefits of the value chain ..........................................................................492 Tools/CAD data RiCAD 3D...................................................................................................495 AE Laser Express .......................................................................................495 Therm software ..........................................................................................495 Rittal Power Engineering.............................................................................495 Configurators TS 8 configurator........................................................................................497 Command panel configurator .....................................................................497 Support arm configurator............................................................................497 IT management software RiZone........................................................................................................498 DCIM – Data Center Infrastructure Management.........................................499 Server shutdown software ..........................................................................499 Service Global availability ........................................................................................500 Services......................................................................................................502 Quality management Quality management...................................................................................504 Rittal Catalogue 34/Software & services 477 478 Rittal Catalogue 34/Software & services nextlevel for industry The alliance between Eplan, Rittal and Kiesling is the only one of its kind in the world. Take value-added to the next level and completely re-automate your processes, from engineering through to production. ◾ Planning and project management ◾ Design, calculation, verification ◾ Components and system technology + + ◾ Virtual enclosure assembly ◾ Enclosure machining ◾ Documentation Rittal Catalogue 34/Software & services 479 Planning and project management With Eplan, you are placing your trust in Europe's leading solutions for the engineering process. The Eplan platform integrates all relevant works in the development and design process, and is considered a pace-setter in the engineering world. The EPLAN data portal is the basis for crossplatform engineering, with a Web service for high-quality device data available worldwide. EPLAN Electric P8 – the high-end tool for process-oriented project management, documentation and administration of electrical automation projects – is incorporated into the Eplan platform. ◾ EPLAN Data Portal – Over 330,000 component data records for project management in electrical engineering ◾ EPLAN Electric P8 – Innovative project management, documentation and administration of electrical engineering automation projects Planning Project management 480 Rittal Catalogue 34/Software & services Rittal Catalogue 34/Software & services 481 Design – Calculation – Verification The application-dependent design of power distribution components and climate control measures is a key element in the engineering process of an automation plant. Rittal offers perfect tools to assist you: “Rittal Power Engineering” allows you to easily configure standard-compliant Ri4Power low-voltage switchgear and busbar systems – with integral design certificate! One key criterion of efficient plant planning is optimum design of the climate control system. Here, our “Therm” product provides precise, fast calculation of your climate control requirements and helps you to design suitable climate control measures – also available as an App for iPhones and Androids! The CAD data of the components provide the basis for efficient planning. This data can be retrieved online via the Rittal website with our “RiCAD-3D” software, and worldwide via Partcommunity. ◾ Therm – Calculation program for enclosure climate control ◾ Rittal Power Engineering – Configuration of standard-compliant low-voltage switchgear and busbar systems ◾ RiCAD-3D – The database of Rittal CAD data compatible with all commercially available CAD systems Design Calculation Verification 482 Rittal Catalogue 34/Software & services Rittal Catalogue 34/Software & services 483 Components and system technology “Rittal – The System.” Due to its coordinated, innovative modular system, Rittal’s solutions offer maximum cost efficiency for your company, whatever its size. Tested components with regard to IP protection category, strength requirements and PE conductor function – ideal for compliance with standard IEC 61 439. ◾ Enclosures ◾ Power Distribution ◾ Climate Control ◾ IT Infrastructure ◾ Software & Services Components System technology 484 Rittal Catalogue 34/Software & services Rittal Catalogue 34/Software & services 485 Virtual enclosure layout Based on electrical project management and hardware engineering, correct system-based design of power distribution and climate control, backed up by technological data on Rittal system components, EPLAN Pro Panel allows you to achieve a virtual enclosure assembly layout. EPLAN Pro Panel is the software solution for technological project management and 3D assembly layout of enclosures. Fully integrated into the Eplan platform, consistent product data from the EPLAN Data Portal supports interdisciplinary engineering in electrical design and enclosure project management, enhances project quality, and in this way permanently accelerates the product creation process. The virtual 3D product data model provides all data needed to control NC production machines, automated wire assembly or the production of individual copper busbars. ◾ EPLAN Pro Panel Professional – Virtual enclosure layout in 3D Virtual enclosure layout 486 Rittal Catalogue 34/Software & services Rittal Catalogue 34/Software & services 487 Enclosure machining The NC data output from EPLAN Pro Panel provides the basis for the professional machining of enclosures, cases and mounting plates. All machining (drilling, thread-tapping, milling) operations are fully automated, fast, precise and reliable with “Perforex” machining centres from Kiesling. The cost-intensive, time-consuming manual machining of enclosure parts is eliminated altogether, for the ultimate efficiency boost! Enclosure machining 488 Rittal Catalogue 34/Software & services Kiesling Perforex ◾ Perforex – The machining centre for enclosure production Rittal Catalogue 34/Software & services 489 Documentation Prepare your documentation to the latest standard IEC 61 439. Many Rittal components already meet the defined requirements, and have done for many years. Now, we can help you to prepare the required documentation with superbly coordinated processes in the value chain. ◾ Planning and project management with engineering solutions from Eplan ◾ Calculation and design using tools from Rittal ◾ Tested system components from Rittal ◾ 3D enclosure layout with engineering solutions from Eplan ◾ Machining with the Kiesling machining centre Documentation 490 Rittal Catalogue 34/Software & services Rittal Catalogue 34/Software & services 491 Benefits of the value chain By accelerating processes throughout the value chain, you can achieve potential savings of up to 50%. ◾ Shorter throughput times ◾ Enhanced quality ◾ Flexible response to customer requirements ◾ Faster delivery ◾ Cost transparency and control ◾ Standard-compliant documentation Planning Project management 492 Design Calculation Verification Components System technology Virtual enclosure layout Enclosure machining Documentation Rittal Catalogue 34/Software & services nextlevel for industry + + Up to 50% faster processes Rittal Catalogue 34/Software & services 493 494 Rittal Catalogue 34/Software & services Tools/CAD data RiCAD 3D Greater efficiency in plant design Regardless of which CAD system you use, RiCAD 3D effectively supports the efficiency and productivity of your plant design work. Fast online access to original data in all commercially available CAD formats with direct downloading facility available at: www.rittal.com It includes both 2D and 3D drawings for virtually all Rittal products, together with an extensive range of system accessories. Three options for retrieving the CAD data ◾ Offline: RiCAD 3D as a database on your hard drive ◾ Online: Request data via the product pages on the Rittal website ◾ Online: Retrieve data via the Web platform “PARTcommunity” Benefits for users of RiCAD 3D ◾ All CAD data may be transferred into any commercially available CAD system, due to the intelligent, native 2D/3D multiCAD-compatible format. ◾ The accurately detailed and validated drawings allow design drawings to be created by users with optimum planning confidence, in a fraction of the time taken for conventional design, by simply remodelling. ◾ Thanks to the freely selectable level of detail in CAD models, these may be represented in a greatly simplified format, enabling huge performance enhancements among users. AE Laser Express Rittal provides a very special service: You will receive an enclosure that has been customised to your specific requirements, finished with cutouts and drilled holes and painted in your chosen colour, all within just seven days! Benefits: ◾ Send us your drawing via our Internet portal. You will receive your quote within the next 24 hours. ◾ Production will start as soon as we receive your order. ◾ Within seven days, customers in Germany will receive their own compact enclosure, custommanufactured for their particular application. Delivery times for other countries available on request. www.rittal.com Therm software The Therm software package eliminates the need for time-consuming calculation of climate control requirements, see page 385. Rittal Power Engineering Planning software for RiLine busbar systems and Ri4Power low-voltage switchgear with design certificate, see page 295. Rittal Catalogue 34/Software & services 495 496 Rittal Catalogue 34/Software & services Configurators Enclosures Menu-assisted configurators will help you to select the right enclosure and matching standard accessories. As well as the Rittal Model Number for the parts list definition, you will also receive the appropriate CAD data for your CAD system according to your selection. TS 8 configurator Benefits: ◾ Easy, menu-assisted configuration of a TS 8 bayed enclosure with base/plinth, side panels and the required handle system ◾ Mounting rails and punched sections with mounting flanges can be pre-assembled for interior installation ◾ This will produce a 3D drawing that can be incorporated directly into the system design or integrated into EPLANCabinet A complete enclosure configured in just eight clicks, including parts list and 3D model. www.rittal.com Human/machine interface Operation and monitoring play an increasingly vital role in mechanical and plant engineering. Rittal meets the exacting requirements placed on the “packaging” of the sensitive yet powerful electronics with its integrated modular system at the human/ machine interface. Design, function and ergonomics are the distinguishing features of this product range. Rittal provides free Internet planning tools to assist with planning and engineering of the command panels and support arm systems. In this way, the right product for your customer application is achieved simply, quickly and reliably. Command panel configurators Benefits: ◾ Select the enclosure that holds the HMI panel to be used (the integral database contains a variety of commercial panels from various manufacturers) ◾ Easy navigation through the catalogue of questions ◾ Quick compilation of the required features ◾ Request a quote based on the selected data ◾ Request a 3D CAD model for integration into the system design The online configurators for Comfort Panel and Optipanel allow you to configure individual, perfectly coordinated panel solutions. Using a catalogue of questions, the configurators automatically guide you through the individual selection masks until you have compiled a complete system. The system also has a built-in smart consistency check to ensure that your configuration is complete and error-free. www.rittal.com Support arm configurator for CP 40/60/120/180 The system is able to precisely define the correct support arm system using important user-specific parameters such as the jib length, enclosure weight or required cable cross-section. Rittal Catalogue 34/Software & services Benefits: ◾ Individual assembly tailored to the requirements of the application ◾ Built-in consistency check ◾ The outcome is a plausibility-checked parts list www.rittal.com 497 RiZone – Customer-focussed, cost-efficient Combine the sum total of all RiZone benefits with the particular benefits offered by Rittal, whatever your requirements. ◾ Comprehensive advice ◾ Holistic system concept ◾ Fast, immediate delivery service ◾ Global and local presence Six good reasons to choose RiZone ◾ Energy optimisation throughout the entire data centre ◾ Simple project management ◾ Automatic detection of Rittal components ◾ Increased protection and reliability of the data centre ◾ Incorporation of the physical data centre infrastructure into a network management system ◾ Communication with third-party devices via SNMP Measurements from RiZonecompatible components (example) UPS ◾ Inverter status ◾ Status of primary network ◾ Battery status Ri4Power ◾ Current ◾ Voltage ◾ Energy ◾ Power CMC ◾ Temperature ◾ Humidity ◾ Access PSM/PDU ◾ Current measurement of PSM busbars ◾ Measurement of power consumption per socket with active PSM ◾ Switching of individual sockets 498 Cooling/LCP ◾ Inlet temperature ◾ Setpoint (target value) ◾ Averaged air injection temperature Chillers ◾ Inlet and return temperature ◾ Pump speed ◾ Operating mode ◾ Power consumption Rittal Catalogue 34/Software & services IT management software DCIM – Data Center Infrastructure Management RiZone – Perfect support of Rittal IT infrastructure components Rittal components – from server enclosures to power supply and climate control, through to security and monitoring technology – are optionally supported during integration and in the operational phase, thanks to coordinated sensors and control. ◾ Incorporation of the physical data centre infrastructure into a data centre infrastructure management system ◾ Simple configuration ◾ Automatic detection of Rittal components ◾ Workflow editor for user-defined scenarios (what happens if …) ◾ Increased security and reliability ◾ Energy optimisation in the data centre ◾ Integration of SNMP-compatible third-party equipment RiZone plus Rittal components creates a system solution with maximum energy efficiency. Note: – RiZone Appliance Standard – RiZone Appliance IP node licence – Server shutdown software see page 463 Rittal Catalogue 34/Software & services ◾ Messaging service The SNMP and OPC-UA protocols provide an interface to superordinate management systems ◾ Workflow engine Control loops for optimisation of the data centre and individual escalation management ◾ Reporting modules Reports based on any given data compilation and time interval ◾ Monitoring modules Internal watchdog module ensures availability ◾ Communication modules Communication with SNMP-compatible devices in the physical data centre infrastructure ◾ Autodiscovery Detection of all SNMP-compatible IT infrastructure components ◾ Database Own SQL database or link to external MS-SQL and Oracle databases ◾ Administration Configuration of RiZone (user and rights management, network integration) 499 500 Rittal Catalogue 34/Software & services Service – Global availability Your direct line to our service department Whenever, wherever and however you need us, we are always on hand to assist you! Simply give us a call, send an e-mail or visit our website to get in touch. Fast, simple and reliable. The benefits to you: ◾ International availability ◾ 24-hour availability ◾ Communication in your local language Faster ◾ Short paths, fast communications: Due to regional service support points and service partners ◾ Perfect interplay between service and engineering Better ◾ Individual service solutions from a single source ◾ A high level of qualifications among Rittal service technicians worldwide Everywhere ◾ More than 250 service partners and over 1,000 service technicians Rittal service addresses worldwide service@rittal.de +49(0)2772 505-1855 www.rittal.com Rittal Europe (Herborn) service@rittal.de +49(0)2772 505-1855 Rittal North America (Urbana) service@rittal.us +1 (800) 477 4000 Option 3 Rittal South America (São Paulo) service@rittal.com.br +55 11 36 22 23 77 Rittal China (Shanghai) service@rittal.cn +86 800 820 0866 Rittal India (Bangalore) service@rittal-india.com +91 80 22 890 78 Rittal Asia-Pacific (Singapore) service@rittal.com.sg +65 65 42 68 18 Individual services for the entire production cycle With Rittal products, rest assured that your production processes are in safe hands. Rittal lifecycle management goes far beyond mere statutory liability for defects and voluntary manufacturer warranties. Rittal safeguards the long-term productivity of your systems. What is more, this service is tailored to your specific requirements, because you decide for yourself which service level best caters for your risk of production downtime. Rittal Catalogue 34/Software & services The benefits to you: ◾ Preserve the value of your systems and equipment ◾ Reduced downtimes ◾ Long-term cost management 501 502 Rittal Catalogue 34/Software & services Services Flexible service contracts: The right solution to match your requirements Features of the Rittal service packages at a glance: Availability: Office hours Response time: Next working day Spare parts availability: Standard Maintenance: 1 x per annum BASIC + Response time: Next day + Extended warranty COMFORT + Availability: 24 hours/day, 365 days/year + Spare parts availability: 24 hours + Extended warranty ADVANCED + Response time: 8 hours (technician on site) + Spare parts availability: Individual concept + Maintenance: Individual (at least twice a year) + Extended warranty FULL + Response time: 4 hours (technician on site) Optional + Extended warranty CUSTOMIZED The benefits to you: ◾ Short response times thanks to local technicians ◾ Preserve the value of your equipment ◾ Extended warranty up to 5 years ◾ Spare parts held in stock ◾ Cost transparency 5 years Manufacturers’ warranty in conjunction with a signed service agreement We are committed to perfection at every phase PRE-SALES We pave the way for your decision-making. Requirement analysis + Load test + Thermography + Simulation and calculations IMPLEMENTATION Because we would love to be on board when you arrive at a solution. Installation/integration + Commissioning + Instruction + Certification AFTER-SALES We take our responsibilities very seriously. Maintenance/installation + Repairs + Spare parts management + Training + Service contracts Spare parts – any time, anywhere Added value, thanks to global availability of individual parts Professional spare parts management guaranteeing maximum global availability of spare parts, and graduated service contracts matched precisely to your individual requirements: That is what you can expect from Rittal International Service. A service contract enables you to spell out many details, such as the availability of spare parts, specifically for your equipment or system. International service: At your service, any time, anywhere. Rittal Catalogue 34/Software & services The benefits to you: ◾ Customer-specific components are held in stock on the basis of individual service contracts ◾ Decentralised warehousing to ensure fast and reliable spare parts availability ◾ Approved original spare parts from the manufacturer 503 504 Rittal Catalogue 34/Software & services Quality management Quality management is a must. Quality philosophy is an attitude. “Rittal – The System.” stands for consistent quality management and on-going refinements to products, services and internal processes. Rittal quality management ensures that regulations and standards are observed, and individual customer requirements are met. In addition to this, we also define our exacting product quality demands in supplementary Rittal standards. The consistent Rittal quality philosophy guarantees perpetually high standards and ensures the global usability of all products with countless international approvals and licences. Alongside product quality, we also focus on process and service quality. All internal processes are continuously refined by quality control groups, and reviewed during in-house audits. Each year, our improvements and high standards are verified by countless successful external system and customer audits. Rittal offers support from day one ◾ Project planning of technical specifications ◾ Prototype assembly, testing and simulations ◾ Manufacturing and assembly ◾ Warehousing service and on-time delivery ◾ Your own personal point of contact throughout the entire project Accredited Rittal test laboratory ◾ Simulation of climatic conditions ◾ Dynamic and static load tests ◾ 3D measurement ◾ Testing of IP protection categories and NEMA type ratings ◾ Salt spray tests ◾ Electrical safety and function tests ◾ Performance testing of cooling units and heat exchangers ◾ Material tests Rittal Catalogue 34/Software & services 505 506 Rittal Catalogue 34/System accessories System accessories Base/plinth Flex-Block base/plinth system ....................................................................510 Base/plinth TS ............................................................................................512 Base/plinth .................................................................................................519 Base Base...........................................................................................................521 Walls Side panels.................................................................................................534 Divider panels/partitions..............................................................................537 Isolator door locking ...................................................................................541 Baying system Enclosure suites .........................................................................................542 Doors/locks Door variants ..............................................................................................549 Installation accessories for modular front design TS....................................552 Viewing panels/operating panels.................................................................556 Lock systems .............................................................................................560 Hinges ........................................................................................................574 Door, internal ..............................................................................................575 Roof/wall mounting Roof ...........................................................................................................580 Wall mounting.............................................................................................587 Interior installation Mounting plates..........................................................................................591 Rail systems ...............................................................................................598 Attachment components ............................................................................618 Component shelves....................................................................................627 System lights ..............................................................................................634 EMC ...........................................................................................................640 Interior installation for areas at risk of earthquakes ......................................643 Earthing ......................................................................................................644 Cable management Cable entry .................................................................................................650 Gland plates ...............................................................................................653 Cable gland ................................................................................................658 Cable gland ................................................................................................660 Cable management ....................................................................................663 482.6 mm (19˝) cable management.............................................................673 482.6 mm (19˝) installation system Swing frame ...............................................................................................678 Accessories for Data Rack..........................................................................682 Mounting angles .........................................................................................683 Slide rails ....................................................................................................687 482.6 mm (19˝) installation ..........................................................................689 Patch panels...............................................................................................696 Splicing boxes ............................................................................................697 LSA connection system ..............................................................................699 Human/machine interface Handles ......................................................................................................700 External mounting accessories ...................................................................703 Front assembly ...........................................................................................704 Monitors .....................................................................................................706 Keyboards, supports and drawers..............................................................707 Interfaces....................................................................................................714 Signal pillars ...............................................................................................716 Technical information Coating/spray-finishing ...............................................................................722 Protection categories..................................................................................723 Rittal Catalogue 34/System accessories 507 The Rittal base/plinth system Flex-Block 508 Rittal Catalogue 34/System accessories Save time ◾ Fast assembly by simply clipping together the base/plinth components ◾ Easily bayed with tool-free baying clip ◾ The enclosure is easily transported, both in its empty and configured state, by removing the base/plinth trim panel Easy to assemble ◾ Toolless assembly of all base/plinth components ◾ Toolless assembly of accessories, e.g. baying and levelling feet ◾ Symmetrical in enclosure widths and depths ◾ With the 200 mm high Flex-Block, combinations of 100 and 200 mm high trim panels may be used Large mounting area ◾ Space-saving cable management in the base/plinth means more space for enclosure configuration ◾ Installation using punched rail – Clip into position from the outside or inside ◾ Flexible configuration: Punched rail with 25 mm pitch pattern of holes Rittal Catalogue 34/System accessories 509 Base/plinth Flex-Block base/plinth system The Rittal base/plinth system Flex-Block Freely combinable base/plinth system for virtually any application. Because the corner pieces and trim panels are packaged separately, it may be tailored to any application. One Model No. for the Flex-Block corner pieces front and rear The enclosure load rests on the corner pieces, so that the trim panels can be attached or removed at any time by using clips. The base/plinth trim panels are symmetrical and are readily exchanged in the width and depth. This creates unprecedented flexibility and great savings potential with base/plinth configuration. One Model No. for the One Model No. for the A complete Flex-Block trim panels Flex-Block trim panels Flex-Block base/plinth front and rear at the sides Base/plinth, height 100 mm Base/plinth, height 200 mm with 200 mm trim panel Base/plinth, height 200 mm. Combination of 100 mm and 200 mm trim panel Functional and cost benefits Potential savings for 100 mm high Flex-Block compared with complete base/plinth Flex-Block Order includes Functional benefits 3 packs of Flex-Block corner pieces The enclosures rest securely on the corner pieces. Transportation via forklift or lifting truck with free-standing enclosures is supported. 12 trim panels 3 packs of Flex-Block corner pieces 4 packs of Flex-Block trim panels Completely closed suite of base/plinths, no trim panels between the enclosure panels. This means more space for assembly and cable entry. 4 trim panels 3 packs of Flex-Block corner pieces 2 packs of Flex-Block trim panels Trim panels are only needed in the area viewed; there are no trim panels between the enclosures. This means more space for assembly and cable entry. 8 trim panels Other options: ◾ Cable clamp may be configured individually in every enclosure panel using system accessories ◾ With 200mm Flex-Block corner pieces, either 100 mm high or 200 mm high trim panels may be used, depending on requirements 510 Rittal Catalogue 34/System accessories Base/plinth Flex-Block base/plinth system Flex-Block corner pieces for TS, TS-IT, SE, PC High-strength plastic corner pieces for individual tool-free assembly with Flex-Block trim panels and accessories. Material: – Corner pieces: Fibreglass-reinforced plastic – Cover caps: ABS Colour: – RAL 9005 Supply includes: – 1 set = 4 corner pieces 4 cover caps Assembly parts for mounting on the enclosure Flex-Block trim panels Corner pieces height mm Model No. 100 8100.000 200 8200.000 Accessories: – – – – – Flex-Block trim panels, see page 511 Punched rail 23 x 23 mm, see page 611 Baying clip 8000.100, see page 511 Adaptor sleeve 8000.500, see page 522 Base mounting plate 2817.000, see page 516 100 mm high, solid For enclosure width and depth in mm Model No. 300 8100.300 400 8100.400 Material: – Sheet steel 500 8100.500 600 8100.600 Colour: – RAL 9005 800 8100.800 1000 8100.010 1200 8100.120 1600 8100.160 1800 8100.180 for Flex-Block corner pieces For tool-free assembly. With symmetrical enclosure dimensions, trim panels are identical in the width and depth. Supply includes: – 1 set = 2 trim panels 200 mm high, solid For enclosure width and depth in mm Model No. 300 8200.300 400 8200.400 500 8200.500 600 8200.600 800 8200.800 1000 8200.010 1200 8200.120 100 mm high, vented For enclosure width and depth in mm Model No. 600 8100.602 800 8100.802 Accessories: – Filter mats for vented Flex-Block trim panels 7583.500, see page 517 Baying clip Packs of Model No. for baying the Flex-Block corner pieces Tool-free baying of Flex-Block base/plinths via a simple clip system. 12 pc(s). 8000.100 Material: – Fibreglass-reinforced plastic Colour: – RAL 9005 Rittal Catalogue 34/System accessories 511 Base/plinth Base/plinth TS Modular base/plinth diversity Regardless of the enclosure depth: The base/plinth components at the front and rear, pre-configured with corner pieces, are always the same for the chosen width. Only the side trim panels are selected according to the enclosure depth and the required base/plinth configuration. The modular concept produces exceptional advantages in terms of cost and function. Base/ plinth Basic form Mounting on the enclosure is conveniently carried out from the outside. The base/plinth interior offers diverse opportunities for cable management mounting levels. One Model No. for the base/plinth components front and rear One Model No. for the base/plinth trim panels, side A complete base/plinth TS Cable entry options Stabilisation of bayed base/ plinths 100 mm 200 mm Functional and cost benefits Fewer parts, more opportunities, lower purchasing, storage and assembly costs – this is the winning formula behind the modular base/plinth system. The following table shows five possible solutions using three bayed base/plinths in 200 mm height from the wide range of options available, together with the potential savings with trim panels compared with the previous 200 mm base/plinth system each with two trim panels of 100 mm height at the sides. Order includes Functional benefits Potential savings compared with twelve 100 mm trim panels 3 packs of base/plinth components 1 pack of base/plinth trim panels, 200 mm high Continuous cable chamber 2 trim panels 200 mm 3 packs of base/plinth components 1 pack of base/plinth trim panels, 200 mm high 1 pack of base/plinth trim panels, 100 mm high 1 pack of base/plinth baying brackets 8601.100 (packs of 20 pieces) 4 pieces are required for this solution Additional stabilisation for transportation purposes with base/plinth trim rotated through 90° 2 trim panels 200 mm 2 trim panels 100 mm 3 packs of base/plinth components 2 pack of base/plinth trim panels, 200 mm high Shielding of the base/plinths in relation to one another 4 trim panels 200 mm 3 packs of base/plinth components 1 pack of base/plinth trim panels, 200 mm high 1 pack of base/plinth trim panels, 100 mm high Additional connection of the base/ plinths 2 trim panels 200 mm 2 trim panels 100 mm Other options: ◾ Cable entry at the side by mounting a 100 mm base/plinth trim panel (top or bottom) ◾ Cable entry from the rear by dismantling one or more trim panels of the base/plinth components ◾ Cable clamp rail fitted on the 100 mm high trim panel 512 Rittal Catalogue 34/System accessories Base/plinth Base/plinth TS Base/plinth components front and rear Sheet steel for TS, TS-IT, SE, CM, TP, PC, IW Base/plinth component consisting of one trim panel and two pre-configured corner pieces. In 200 mm high base/plinth components, one trim panel is divided into two for cable entry. Material: – Base/plinth components: Sheet steel – Cover caps: Plastic Also required: – Depending on the application/load, side base/ plinth trim panels, see page 514 Accessories: – Base mounting plate 2817.000, see page 516 Technical details: Available on the Internet Surface finish: – Spray-finished Colour: – Cover caps: RAL 9005/7035 Supply includes: – 1 set = 2 base/plinth components, 4 cover caps, 4 screws and captive nuts M12 for mounting on the enclosure. 100 mm high, colour: RAL 7022 200 mm high, colour: RAL 7022 For enclosure width mm Version Model No. For enclosure width mm Version Model No. 300 Solid 8601.915 300 Solid 8602.915 400 Solid 8601.400 400 Solid 8602.400 500 Solid 8601.500 500 Solid 8602.500 600 Solid 8601.600 600 Solid 8602.600 800 Solid 8601.800 800 Solid 8602.800 850 Solid 8601.850 850 Solid 8602.850 1000 Solid 8601.000 1000 Solid 8602.000 1100 Solid 8601.300 1100 Solid 8602.100 1200 Solid 8601.200 1200 Solid 8602.200 1600 Solid 8601.920 1600 Solid 8602.920 1800 Solid 8601.980 1800 Solid 8602.980 100 mm high, colour: RAL 7035 200 mm high, colour: RAL 7035 For enclosure width mm Version Model No. For enclosure width mm Version Model No. 300 Solid 8601.905 300 Solid 8602.905 600 Solid 8601.605 600 Solid 8602.605 800 Solid 8601.805 800 Solid 8602.805 Rittal Catalogue 34/System accessories 513 Base/plinth Base/plinth TS Base/plinth trim panels, side Sheet steel for base/plinth components, front and rear For mounting between the base/plinth components. With the 200 mm height, two 100 mm base/ plinth trim panels may also be used. Base/plinth trim panels (100 mm high) may be installed rotated through 90° to stabilise bayed base/plinth components. Also required: – Base/plinth baying brackets 8601.100, see page 514, when mounting base/plinth trim panels rotated through 90°. Accessories: – Assembly bolts for base/plinth, see page 516 Technical details: Available on the Internet Material: – Sheet steel Surface finish: – Spray-finished Supply includes: – 1 set = 2 base/plinth trim panels, including parts for attaching to the base/plinth components 100 mm high, colour: RAL 7022 200 mm high, colour: RAL 7022 For enclosure depth mm Model No. For enclosure depth mm Model No. 300 8601.030 300 8602.030 400 8601.040 400 8602.040 500 8601.050 500 8602.050 600 8601.060 600 8602.060 800 8601.080 800 8602.080 100 mm high, colour: RAL 7035 200 mm high, colour: RAL 7035 For enclosure depth mm Model No. For enclosure depth mm Model No. 600 8601.065 600 8602.065 800 8601.085 800 8602.085 1000 8601.015 1000 8602.015 1200 8601.025 1200 8602.025 Base/plinth baying brackets Packs of Model No. for base/plinth TS Essential if the trim panels are mounted rotated through 90° for additional stabilisation during the transportation of bayed enclosures. 20 pc(s). 8601.100 Additional brackets required for each trim panel: 2 pc(s). Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Screws M8 x 16 mm 514 Rittal Catalogue 34/System accessories Base/plinth Base/plinth TS Cable chamber For enclosures Model No. Width mm Depth mm 400 500 8600.455 400 600 8600.465 Height: 200 mm 600 500 8600.655 Material: – Sheet steel 600 600 8600.665 800 500 8600.855 Colour: – RAL 7035 800 600 8600.865 1200 500 8600.255 1200 600 8600.265 for TS, SE With integral system punchings for individual system accessories. Supply includes: – Sheet steel trim panels front and rear – Assembly parts for mounting on the enclosure Accessories: – Side panels for cable chamber, see page 515 Technical details: Available on the Internet Side panels for cable chamber Height: 200 mm For enclosure depth mm Packs of Model No. 500 2 pc(s). 8600.510 600 2 pc(s). 8600.520 Material: – Sheet steel Colour: – RAL 7035 Supply includes: – Assembly parts Transport castors for base/plinth TS For locating onto the base/plinth corner piece 100 or 200 mm high. Load capacity: – Maximum permissible load per twin castor: static 100 kg Floor clearance mm Model No. 100 8800.390 Also required: – Base/plinth trim panels, side, see page 514 Supply includes: – 1 set = 4 twin castors, 2 x with, 2 x without locks Colour: – RAL 7022 Rittal Catalogue 34/System accessories 515 Base/plinth Base/plinth TS Base mounting plate Packs of Model No. for ◾ Base/plinth TS ◾ Flex-Block base/plinth system ◾ Base/plinth, complete For fastening the base/plinth to the floor without moving the enclosure or bayed enclosure suite. For assembly screws up to 12 mm Ø. 10 pc(s). 2817.000 Material: – Sheet steel Surface finish: – Zinc-plated Fastening bolts for ◾ TS base/plinth ◾ Base/plinth, complete ◾ Base/plinth, stationary For mounting on base/plinth trim panels, side. The lockable fastening bolt allows the installation of cable clamp rails. Tighten with hex spanner, width across flats 19 mm. For base/plinth trim panel Height mm Packs of Model No. 100 10 pc(s). 2819.000 200 10 pc(s). 2819.200 Accessories: – Cable clamp rail, see page 665 Material: – Hexagon steel 1) Levelling component for TS base/plinth For retrospective levelling on uneven floors at the installation site up to a maximum of 15 mm. Installed through the corner piece of the base/plinth component. Adjusted using a SW 19 hex spanner. 1671) 1171) 67 Surface finish: – Zinc-plated Only for height 200 mm For base/plinth height mm Packs of Model No. 100 4 pc(s). 2891.000 200 4 pc(s). 2892.000 Benefits: ◾ A door offset caused by uneven flooring can be corrected ◾ Installed on the assembled enclosure, i.e. no need to plan levelling in advance Load capacity: – Max. admissible static load: 2500 N per levelling component (check the load capacity of the floor) Supply includes: – Assembly parts 516 Rittal Catalogue 34/System accessories Base/plinth Base/plinth TS Cover cap for TS base/plinth components As a replacement. Material: – Plastic ABS For base/plinth height mm Packs of Model No. 100 4 pc(s). 8601.130 200 4 pc(s). 8601.140 Colour: – RAL 9005 Base/plinth, stationary for PC, IW Design-coordinated with the enclosures, height 100 mm, with front projection. Material: – Sheet steel, 2.0 mm Colour: – RAL 7035 – Design component, front: RAL 7015 Supply includes: – 1 design component, front – 1 base/plinth component, rear – 2 base/plinth trim panels, side Filter mat for Flex-Block, vented version To cover the trim panel in the Flex-Block. The filter mat is simply inserted into the trim panel from the rear. May be shortened to the required length. Rittal Catalogue 34/System accessories For depth mm Model No. 600 8800.920 Accessories: – Twin castors 7495.000, see page 522 – Levelling feet 4612.000, see page 521 – Fastening bolt for cable clamp rails 2819.000, see page 516 – Support bracket 4183.000, see page 620 For enclosure width mm Packs of Model No. 600/800 4 pc(s). 7583.500 517 Base/plinth Base/plinth TS Base/plinth components front and rear Stainless steel for TS, SE For enclosure width mm Height mm Model No. 600 100 8701.600 800 100 8701.800 Material: – Stainless steel 1.4301 (AISI 304) 1000 100 8701.000 1200 100 8701.200 Surface finish: – Brushed, grain 400 600 200 8702.600 800 200 8702.800 Supply includes: – Mounting accessories for mounting on the enclosure 1000 200 8702.000 1200 200 8702.200 100 mm high: – 2 trim panels front/rear 200 mm high: – 2 corner pieces with removable trim panel – 1 trim panel front/rear Base/plinth trim panels, side Stainless steel for base/plinth components, front and rear For mounting between the base/plinth components. With the 200 mm height, two 100 mm base/ plinth trim panels may also be used. Base/plinth trim panels (100 mm high) may be installed rotated through 90° to stabilise bayed base/plinth components. Material: – Stainless steel 1.4301 (AISI 304) Surface finish: – Brushed, grain 400 Supply includes: – 2 base/plinth trim panels, including parts for attaching to the base/plinth components Accessories: – Base/plinth trim, modular (perforated plate), see page 518 For enclosure depth mm Height mm Model No. 400 100 8701.040 500 100 8701.050 600 100 8701.060 400 200 8702.040 500 200 8702.050 600 200 8702.060 Also required: – Base/plinth baying brackets 8601.100, see page 514, when base/plinth trim panels are installed rotated through 90° Accessories: – Assembly bolts for base/plinth, see page 516 Technical details: Available on the Internet Base/plinth trim, modular for ◾ TS base/plinth, stainless steel ◾ Base/plinth: Complete, stainless steel For secure cable routing in the base/plinth between the floor and the enclosure. For enclosure depth mm Packs of Model No. 400 4 pc(s). 2907.000 500 4 pc(s). 2908.000 600 4 pc(s). 2913.000 Width: 175 mm Material: – Stainless steel 1.4301 (AISI 304) Accessories: – Cable tie 2597.000, see page 667 Supply includes: – 4 base/plinth trim panels Note: – One base/plinth trim panel is needed per 200 mm base/plinth width 518 Rittal Catalogue 34/System accessories Base/plinth Base/plinth Base/plinth, complete Sheet steel for AE, TP universal console Trim panels at the front and rear with fitted corner pieces and side trim panels. Material: – Sheet steel 100 mm high: – 4 corner pieces – 2 trim panels front/rear – 2 trim panels, side 200 mm high: – 4 corner pieces – 1 trim panel front/rear x 200 mm – 2 trim panels front/rear x 100 mm – 4 trim panels, side Surface finish: – Spray-finished Colour: – RAL 7022 Base/plinth for TP universal console, 100 mm high For enclosures/consoles Width mm Depth mm Base/plinth depth mm 600 500 450 For enclosures Depth mm Base/plinth for AE, 200 mm high For enclosures Model No. Width mm Depth mm Base/plinth depth mm Model No. 2807.200 600 300 279 2826.200 800 300 279 2828.200 1000 300 279 2802.200 Base/plinth for AE, 100 mm high Width mm Supply includes: – Mounting accessories for mounting on the enclosure Base/plinth depth mm Model No. 600 300 279 2816.200 800 300 279 2818.200 1000 300 279 2801.200 Technical details: Available on the Internet Accessories: – Fastening bolt, see page 516 – Base mounting plate, see page 516 Base/plinth, complete Stainless steel for stainless steel one-piece consoles Height: 100 mm Where necessary, 2 base/plinths may be installed one above the other. For enclosures/consoles Model No. Width mm Depth mm 600 400 2865.000 800 400 2869.000 1000 400 2867.000 1200 400 2870.000 Material: – Stainless steel 1.4301 (AISI 304) Surface finish: – Brushed Supply includes: – Mounting accessories for mounting on the enclosure – 2 trim panels front/rear – 2 trim panels, side Accessories: – Levelling feet, see page 520 – Base/plinth trim, modular (perforated plate), see page 518 Cast feet Packs of Model No. For secure siting of ◾ Enclosure for tower PC or ◾ Other customer equipment 2 pc(s). 6902.920 Depth: 700 mm Material: – Cast aluminium Accessories: – Base mount 6147.000, see page 167 – Twin castors, see page 522 Colour: – RAL 7035 Supply includes: – Assembly parts Rittal Catalogue 34/System accessories 519 Base/plinth Base/plinth Levelling feet For direct mounting underneath the base/plinth TS and the base/plinth, complete. For unhindered access e.g. when cleaning the floor, and to compensate for floor irregularities. Load capacity: – Max. admissible static load: 400 kg per levelling foot Thread Packs of Model No. M12 4 pc(s). 2889.000 M16 4 pc(s). 2890.000 Possible alternative: – Levelling feet Hygienic Design, see page 172 Adjustment range: – M12: 55 mm – 125 mm – M16: 45 mm – 120 mm Material: – Stainless steel 1.4301 (AISI 304) Cross member for TS, SE, CM, TP, PC, IW adjustable ◾ To increase stability ◾ Height 70 mm ◾ Adjustable from the enclosure depth For enclosure depth mm 400 500 600 800 Packs of Model No. 2 pc(s). 8601.450 2 pc(s). 8601.680 To increase stability, the cross member is positioned 138 mm above the base frame of the enclosure at the front and rear. For deeper enclosures, the rear part may be extended and screw-fastened again. For screw-fastening to the floor and enclosure with mounting hole at the sides, front and rear. The castors and levelling feet may be secured to the welded nuts M12. – Twin castors 6148.000, 7495.000 see page 522 – Levelling feet 4612.000, 7493.100, see page 521 Material: – Sheet steel Technical details: Available on the Internet Accessories: Surface finish: – Spray-finished Colour: – RAL 7015 Stabiliser for TS-IT The pull-out stabiliser is quickly and easily retrofitted to the lower frame of the server racks and only extended when necessary. Load capacity: – Up to a maximum of 150 kg static load Material: – Sheet steel Enclosure depth mm Model No. 1000 7825.250 Accessories: – Levelling feet, see page 521 and/or – Transport kit, see page 522 Surface finish: – Zinc-plated Supply includes: – Assembly parts 150kg Note: – The stabiliser cannot be used together with base plates, base frames or base/plinths 520 Rittal Catalogue 34/System accessories Base Base Levelling feet for TS, TS-IT, SE, PC, IW To compensate for height differences with floor irregularities. Assembly thread M12. Optionally with hex socket for adjustment from the inside of the enclosure. Load capacity: – Max. admissible static load: approx. 300 kg per levelling foot Hex socket Adjustment height Packs of Model No. Without 18 – 43 mm 4 pc(s). 4612.000 With 18 – 63 mm 4 pc(s). 7493.100 Also required: – For mounting on the TS base/plinth: Base/plinth adaptor 8800.220, see page 522 – For mounting on the Flex-Block base/plinth system: Adaptor sleeve 8000.500, see page 522 Technical details: Available on the Internet Levelling feet Packs of Model No. for FlatBox M10 x 20 mm For screw-fastening onto the enclosure base when used as a floor-standing or desktop enclosure. Width across flats 17, mounting thread multi-tooth 30. 4 pc(s). 7507.740 Levelling feet Packs of Model No. 85 – 115 mm high For mounting on TS, SE and PC enclosures, for easier floor cleaning and to compensate for floor irregularities ±15 mm. 4 pc(s). 2859.000 Height: 100 mm Possible alternative: – Levelling feet Hygienic Design, see page 172 Load capacity: – Max. admissible static load: 350 kg per levelling foot Material: – Stainless steel 1.4301 (AISI 304) Supply includes: – Assembly parts to the enclosure Rittal Catalogue 34/System accessories 521 Base Base Twin castors Maximum admissible static load (per castor) Mounting thread M12 x 20. 1 For: ◾ Baying system TS 8 ◾ SE 8 free-standing enclosure system ◾ PC enclosure system ◾ Pedestal base plate ◾ Pedestal 6106.200/6106.300 ◾ TopConsole pedestals ◾ Industrial workstations ◾ Data Rack Floor clearance Lock Also required: Packs of 1 set(s) Black with grey running surface Colour Model No. 6148.000 Maximum admissible static load (per castor) 2 Transport kit for TS-IT Floor clearance: approx. 40 mm 85 mm 2 with, 2 without Floor clearance – For mounting on the TS base/plinth: Base/plinth adaptor for twin castors 8800.290, see page 523 75 kg Lock 120 kg 125 mm 2 with, 2 without Packs of 1 set(s) Colour Black Model No. 7495.000 Packs of Model No. 1 set(s) 7825.900 Load capacity: – Max. admissible static load: 750 kg per enclosure Note: – Only for enclosures without gland plates and base tray/base mount Supply includes: – 1 set = 4 castors (2 steerable) including assembly parts Technical details: Available on the Internet Adaptor sleeve Packs of Model No. for levelling feet To accommodate levelling feet on the Flex-Block and for stacking the base/plinth corner pieces. 12 pc(s). 8000.500 Material: – Steel Accessories: – Levelling feet 4612.000, see page 521 Surface finish: – Zinc-plated Supply includes: – 12 adaptor sleeves – 8 screws M12 – 8 washers Base/plinth adaptor Packs of Model No. for levelling feet Connection component for fastening M12 levelling feet to the TS base/plinth. 4 pc(s). 8800.220 Material: – Sheet steel Accessories: – Levelling feet 4612.000, 7493.100, see page 521 Surface finish: – Zinc-plated 522 Rittal Catalogue 34/System accessories Base Base Base/plinth adaptor Packs of Model No. for twin castors Connection component for mounting twin castors on the TS base/plinth. 4 pc(s). 8800.290 Material: – Sheet steel Surface finish: – Zinc-plated Width divider Divides 1200 mm wide TS and SE enclosures into two halves. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – 1 set = 1 bracket for right/left, 2 compensating plates for the top, mounting accessories. 1st mounting position: Two mounting plates side by side. Two mounting plates (from 600 mm wide enclosures) in a 1200 mm wide enclosure permit independent positioning and easy handling. 2nd mounting position: System support rails, fitted on the left. Whilst heavy installed equipment rests on the system support rails, the remaining floor space is left free, e.g. for unhindered cable entry. 3rd mounting position: Cable clamp rail, installed on the left. With 1200 mm wide enclosures, the width divider allows cable entry and cable clamping to be arranged differently on the left and right of the enclosure. Rittal Catalogue 34/System accessories Also required: – Base/plinth trim panels, side, see page 514, wherever a twin castor is fitted Packs of Model No. 1 set(s) 8800.200 Also required: – TS punched rail 18 x 38 mm, see page 609 – PS punched section without mounting flange, 23 x 73 mm, see page 611 Depending on the installation situation Also required: – Four TS punched rails 18 x 38 mm at the bottom, according to the enclosure depth, see page 609 – One PS punched section without mounting flange 23 x 73 mm at the top, according to the enclosure depth, see page 611 Also required: – Two system support rails 4361.000, see page 613 – 1 TS punched rail 18 x 38 mm in accordance with the enclosure depth (included with the supply of the standard enclosure) Also required: – 1 cable clamp rail 4191.000, see page 665 – 1 TS punched rail 18 x 38 mm in accordance with the enclosure depth (included with the supply of the standard enclosure) 523 Base Base Reinforcement bracket Packs of Model No. for TS, SE, TP universal console For use as an additional stabiliser to the clamping straps when populated enclosures are screw-fastened via the base tray to the base/plinth or pallet for transportation purposes. 4 pc(s). 8800.830 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Base mount for TS-IT To accommodate gland plate modules. ◾ Tool-free mounting or screw-fastening ◾ Easily retrofitted and combined with stabiliser Material: – Sheet steel For enclosure depth mm Packs of Model No. 600 2 pc(s). 5501.300 800 2 pc(s). 5501.310 1000 2 pc(s). 5501.320 1200 2 pc(s). 5501.350 Surface finish: – Spray-finished Colour: – RAL 7035 Supply includes: – 2 mounting rails including assembly parts Clips Packs of Model No. for gland plates As replacement and for additional gland plate attachments in TS, SE, CM, TP. 50 pc(s). 8800.075 Material: – Sheet steel Surface finish: – Zinc-plated 524 Rittal Catalogue 34/System accessories Base Base Gland plate for CM, TP Potential equalisation is provided via assembly components and earthing points. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Note: – For greater stability and universal cable entry, the base opening is divided in the width for 1000, 1200 and 1600 mm wide enclosures, and is suitable for various configurations For enclosure depth 300 mm, complete module groups For enclosure/console width mm One-piece base opening For enclosure width Cable entry module groups Packs Packs of required 600 Two-piece base opening 800 Model No. Packs Packs of required 1000 1200 1600 Model No. Cable clamp strip, centre Gland plate, depth 50 mm 1 pc(s). 2 5001.210 5001.211 1 pc(s). 4 5001.212 5001.213 5001.233 Section for cable entry, centre 1 set(s) 1 8802.060 8802.080 2 set(s) 1 8802.100 8802.120 8802.160 Gland plate, depth 100 mm 1 pc(s). 1 5001.214 5001.215 1 pc(s). 2 5001.216 5001.217 5001.234 Section for cable entry, rear 1 set(s) 1 8802.065 8802.085 2 set(s) 1 8802.105 8802.125 8802.165 Gland plate, depth 50 mm 1 pc(s). 1 5001.210 5001.211 1 pc(s). 2 5001.212 5001.213 5001.233 Cable entry plates for grommets 1 pc(s). 1 5001.226 5001.227 1 pc(s). 1 5001.228 5001.229 5001.237 Cable clamp strip, rear Grommets, 1 x Cable entry and connector grommets, see page 651 For cable glands One-piece Gland plate, depth 150 mm 1 pc(s). 1 5001.218 5001.219 1 pc(s). 2 5001.220 5001.221 5001.235 Gland plate, depth 50 mm 1 pc(s). 1 5001.210 5001.211 1 pc(s). 2 5001.212 5001.213 5001.233 Gland plate, depth 100 mm 1 pc(s). 1 5001.214 5001.215 1 pc(s). 2 5001.216 5001.217 5001.234 Two-piece Cable glands, see page 658 Rittal Catalogue 34/System accessories 525 Base Base For enclosure depth 400 mm, complete module groups For enclosure/console width mm One-piece base opening For enclosure width Cable entry module groups Packs Packs of required 600 Two-piece base opening 800 Model No. Packs Packs of required 1000 1200 1600 Model No. Cable clamp strip, centre Gland plate, depth 50 mm 1 pc(s). 1 5001.210 5001.211 1 pc(s). 2 5001.212 5001.213 5001.233 Gland plate, depth 150 mm 1 pc(s). 1 5001.218 5001.219 1 pc(s). 2 5001.220 5001.221 5001.235 Section for cable entry, centre 1 set(s) 1 8802.060 8802.080 2 set(s) 1 8802.100 8802.120 8802.160 Gland plate, depth 100 mm 1 pc(s). 2 5001.214 5001.215 1 pc(s). 4 5001.216 5001.217 5001.234 Section for cable entry, rear 1 set(s) 1 8802.065 8802.085 2 set(s) 1 8802.105 8802.125 8802.165 Cable clamp strip, rear Cable clamp strip, centre and rear Gland plate, depth 50 mm 1 pc(s). 1 5001.210 5001.211 1 pc(s). 2 5001.212 5001.213 5001.233 Gland plate, depth 100 mm 1 pc(s). 1 5001.214 5001.215 1 pc(s). 2 5001.216 5001.217 5001.234 Section for cable entry, centre 1 set(s) 1 8802.060 8802.080 2 set(s) 1 8802.100 8802.120 8802.160 Section for cable entry, rear 1 set(s) 1 8802.065 8802.085 2 set(s) 1 8802.105 8802.125 8802.165 Gland plate, depth 150 mm 1 pc(s). 1 5001.218 5001.219 1 pc(s). 2 5001.220 5001.221 5001.235 Cable entry plates for grommets 1 pc(s). 1 5001.226 5001.227 1 pc(s). 2 5001.228 5001.229 5001.237 Grommets, 1 x Cable entry and connector grommets, see page 651 Grommets, 2 x Gland plate, depth 50 mm 1 pc(s). 1 5001.210 5001.211 1 pc(s). 2 5001.212 5001.213 5001.233 Cable entry plates for grommets 1 pc(s). 2 5001.226 5001.227 1 pc(s). 4 5001.228 5001.229 5001.237 Cable entry and connector grommets, see page 651 EMC EMC gland plate 1 set(s) 1 8800.660 8800.680 1 set(s) 2 8800.600 8800.620 – Gland plate, depth 100 mm 1 pc(s). 1 5001.214 5001.215 1 pc(s). 2 5001.216 5001.217 – Cable entry and connector grommets, see page 651 For cable glands One-piece Gland plate, depth 250 mm 1 pc(s). 1 5001.222 5001.223 1 pc(s). 2 5001.224 5001.225 5001.236 Gland plate, depth 150 mm 1 pc(s). 1 5001.218 5001.219 1 pc(s). 2 5001.220 5001.221 5001.235 Gland plate, depth 100 mm 1 pc(s). 1 5001.214 5001.215 1 pc(s). 2 5001.216 5001.217 5001.234 Two-piece Cable glands, see page 658 526 Rittal Catalogue 34/System accessories Base Base For enclosure depth 500 mm, complete module groups For enclosure/console width mm One-piece base opening For enclosure width Cable entry module groups Packs Packs of required 600 Two-piece base opening 800 Model No. Packs Packs of required 1000 1200 1600 Model No. Cable clamp strip, centre Gland plate, depth 50 mm 1 pc(s). 1 5001.210 5001.211 1 pc(s). 2 5001.212 5001.213 5001.233 Gland plate, depth 250 mm 1 pc(s). 1 5001.222 5001.223 1 pc(s). 2 5001.224 5001.225 5001.236 Section for cable entry, centre 1 set(s) 1 8802.060 8802.080 2 set(s) 1 8802.100 8802.120 8802.160 Gland plate, depth 150 mm 1 pc(s). 2 5001.218 5001.219 1 pc(s). 4 5001.220 5001.221 5001.235 Section for cable entry, rear 1 set(s) 1 8802.065 8802.085 2 set(s) 1 8802.105 8802.125 8802.165 Cable clamp strip, rear Cable clamp strip, centre and rear Gland plate, depth 50 mm 1 pc(s). 1 5001.210 5001.211 1 pc(s). 2 5001.212 5001.213 5001.233 Gland plate, depth 100 mm 1 pc(s). 2 5001.214 5001.215 1 pc(s). 4 5001.216 5001.217 5001.234 Section for cable entry, centre 1 set(s) 1 8802.060 8802.080 2 set(s) 1 8802.100 8802.120 8802.160 Section for cable entry, rear 1 set(s) 1 8802.065 8802.085 2 set(s) 1 8802.105 8802.125 8802.165 Gland plate, depth 250 mm 1 pc(s). 1 5001.222 5001.223 1 pc(s). 2 5001.224 5001.225 5001.236 Cable entry plates for grommets 1 pc(s). 1 5001.226 5001.227 1 pc(s). 2 5001.228 5001.229 5001.237 Grommets, 1 x Cable entry and connector grommets, see page 651 Grommets, 2 x Gland plate, depth 150 mm 1 pc(s). 1 5001.218 5001.219 1 pc(s). 2 5001.220 5001.221 5001.235 Cable entry plates for grommets 1 pc(s). 2 5001.226 5001.227 1 pc(s). 4 5001.228 5001.229 5001.237 Cable entry and connector grommets, see page 651 EMC EMC gland plate 1 set(s) 1 8800.660 8800.680 1 set(s) 2 8800.600 8800.620 – Gland plate, depth 100 mm 1 pc(s). 2 5001.214 5001.215 1 pc(s). 4 5001.216 5001.217 – Cable entry and connector grommets, see page 651 For cable glands, two-piece Gland plate, depth 100 mm 1 pc(s). 1 5001.214 5001.215 1 pc(s). 2 5001.216 5001.217 5001.234 Gland plate, depth 250 mm 1 pc(s). 1 5001.222 5001.223 1 pc(s). 2 5001.224 5001.225 5001.236 Cable glands, see page 658 Rittal Catalogue 34/System accessories 527 Base Base Gland plate for TS-IT Potential equalisation is provided via assembly components and earthing points. ◾ Gland plate set To conceal the entire base opening. ◾ Gland plate modules Select suitable modules depending on the application. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Accessories: – Clips for gland plates, see page 524 For enclosure depth 600 mm For enclosure width mm A Gland plate set Packs required Packs of 600 800 Model No. Gland plate, solid, with sliding panel, multi-piece 1 set(s) 1 Packs of Packs required Gland plate, depth 150 mm 1 pc(s). 1 5001.218 5001.219 Sliding panel, depth 150 mm 1 pc(s). 1 5001.239 5001.240 Cable entry with brush strip 7825.361 7825.381 Vented 7825.360 7825.380 7825.367 7825.387 – 7825.388 Gland plate modules – 5502.510 For enclosure width mm 600 B 1 module plate as selected 800 Model No. Module plate, depth 237.5 mm Cable entry with brush strip, super-airtight 1 pc(s). 1 Cable entry, side C Cable entry, rear or front Model No. Gland plate, depth 100 mm 1 pc(s). 2 5001.214 5001.215 Sliding panel, depth 150 mm 1 pc(s). 2 5001.239 5001.240 3m 1 2573.000 2573.000 Gland plate, depth 100 mm 1 pc(s). 2 5001.214 5001.215 Sliding panel, depth 150 mm 1 pc(s). 2 5001.239 5001.240 Section for cable entry, centre 1 set(s) 1 8802.060 8802.080 Foam rubber cable clamp strip D Cable entry, centre A Model No. B C D 7 5 1 2 6 5 2 3 5 5 Gland pate, depth 250 mm Gland plate, depth 150 mm Gland plate, depth 100 mm Gland plate, depth 50 mm Sliding panel, depth 150 mm 3 5 3 5 8 Also required: – Base mount, see page 524 Module plate, depth 237.5 mm Self-adhesive foam cable clamp strip Section for cable entry, centre 528 Rittal Catalogue 34/System accessories Base Base For enclosure depth 800 mm For enclosure width mm A Gland plate set Packs required Packs of 600 800 Model No. Gland plate, solid, with sliding panel, multi-piece 1 set(s) 1 Packs of Packs required Gland plate, depth 250 mm 1 pc(s). 1 5001.222 Gland plate, depth 100 mm 1 pc(s). 1 5001.214 5001.215 Sliding panel, depth 150 mm 1 pc(s). 1 5001.239 5001.240 Cable entry with brush strip 7825.361 7825.381 Vented 7825.360 7825.380 7825.367 7825.387 – 7825.388 Gland plate modules – 5502.530 For enclosure width mm 600 B 1 module plate as selected 800 Model No. Module plate, depth 237.5 mm Cable entry with brush strip, super-airtight 1 pc(s). 1 Cable entry, side C 2 module plates as selected 5001.223 Model No. Gland plate, depth 150 mm 1 pc(s). 1 5001.218 5001.219 Sliding panel, depth 150 mm 1 pc(s). 1 5001.239 5001.240 Cable entry with brush strip 7825.361 7825.381 Vented 7825.360 7825.380 7825.367 7825.387 – 7825.388 Module plate, depth 237.5 mm Cable entry with brush strip, super-airtight 1 pc(s). 2 Cable entry, side D Cable entry, rear or front Model No. Gland plate, depth 250 mm 1 pc(s). 1 5001.222 Gland plate, depth 150 mm 1 pc(s). 1 5001.218 5001.219 Sliding panel, depth 150 mm 1 pc(s). 2 5001.239 5001.240 3m 1 2573.000 2573.000 Gland plate, depth 250 mm 1 pc(s). 1 5001.222 Gland plate, depth 150 mm 1 pc(s). 1 5001.218 5001.219 Sliding panel, depth 150 mm 1 pc(s). 2 5001.239 5001.240 Section for cable entry, centre 1 set(s) 1 8802.060 8802.080 Foam rubber cable clamp strip E Cable entry, centre A 5001.223 Model No. B C D 5001.223 E 7 6 6 2 5 1 5 3 5 2 1 1 3 3 5 6 5 Gland pate, depth 250 mm Gland plate, depth 150 mm Gland plate, depth 100 mm Gland plate, depth 50 mm Sliding panel, depth 150 mm 8 1 1 5 5 Also required: – Base mount, see page 524 Module plate, depth 237.5 mm Self-adhesive foam cable clamp strip Section for cable entry, centre Rittal Catalogue 34/System accessories 529 Base Base For enclosure depth 1000 mm For enclosure width mm A Gland plate set Packs required Packs of 600 800 Model No. Gland plate, solid, with sliding panel, multi-piece 1 set(s) 1 Packs of Packs required Gland plate, depth 250 mm 1 pc(s). 2 5001.222 Gland plate, depth 50 mm 1 pc(s). 1 5001.210 5001.211 Sliding panel, depth 150 mm 1 pc(s). 1 5001.239 5001.240 Cable entry with brush strip 7825.361 7825.381 Vented 7825.360 7825.380 7825.367 7825.387 – 7825.388 Gland plate modules 5502.540 5502.550 For enclosure width mm 600 B 1 module plate as selected 800 Model No. Module plate, depth 237.5 mm Cable entry with brush strip, super-airtight 1 pc(s). 1 Cable entry, side C 2 module plates as selected 5001.223 Model No. Gland plate, depth 250 mm 1 pc(s). 1 5001.222 Gland plate, depth 100 mm 1 pc(s). 1 5001.214 5001.215 Sliding panel, depth 150 mm 1 pc(s). 1 5001.239 5001.240 Cable entry with brush strip 7825.361 7825.381 Vented 7825.360 7825.380 7825.367 7825.387 – 7825.388 Module plate, depth 237.5 mm Cable entry with brush strip, super-airtight 1 pc(s). 2 Cable entry, side D Cable entry, rear or front 5001.223 Model No. Gland plate, depth 250 mm 1 pc(s). 2 5001.222 Gland plate, depth 100 mm 1 pc(s). 1 5001.214 5001.215 Sliding panel, depth 150 mm 1 pc(s). 2 5001.239 5001.240 3m 1 2573.000 2573.000 Gland plate, depth 250 mm 1 pc(s). 2 5001.222 Gland plate, depth 100 mm 1 pc(s). 1 5001.214 5001.215 Sliding panel, depth 150 mm 1 pc(s). 2 5001.239 5001.240 Section for cable entry, centre 1 set(s) 1 8802.060 8802.080 Foam rubber cable clamp strip E Cable entry, centre A 5001.223 Model No. B 5 C D E 7 2 2 2 6 6 5 1 1 1 4 5 2 8 1 3 1 1 5 6 5 5 1 1 5001.223 Gland pate, depth 250 mm Gland plate, depth 150 mm Gland plate, depth 100 mm Gland plate, depth 50 mm Sliding panel, depth 150 mm 1 5 Also required: – Base mount, see page 524 Module plate, depth 237.5 mm Self-adhesive foam cable clamp strip Section for cable entry, centre 530 Rittal Catalogue 34/System accessories Base Base For enclosure depth 1200 mm For enclosure width mm A Gland plate set Packs required Packs of 600 800 Model No. Gland plate, solid, with sliding panel, multi-piece 1 set(s) 1 Packs of Packs required Gland plate, depth 250 mm 1 pc(s). 3 5001.222 5001.223 Sliding panel, depth 150 mm 1 pc(s). 1 5001.239 5001.240 Cable entry with brush strip 7825.361 7825.381 Vented 7825.360 7825.380 7825.367 7825.387 – 7825.388 Gland plate modules 5502.560 5502.570 For enclosure width mm 600 B 1 module plate as selected 800 Model No. Module plate, depth 237.5 mm Cable entry with brush strip, super-airtight 1 pc(s). 1 Cable entry, side C 2 module plates as selected Model No. Gland plate, depth 250 mm 1 pc(s). 2 5001.222 Gland plate, depth 50 mm 1 pc(s). 1 5001.210 5001.211 Sliding panel, depth 150 mm 1 pc(s). 1 5001.239 5001.240 Cable entry with brush strip 7825.361 7825.381 Vented 7825.360 7825.380 7825.367 7825.387 – 7825.388 Module plate, depth 237.5 mm Cable entry with brush strip, super-airtight 1 pc(s). 2 Cable entry, side D Cable entry, rear or front 5001.223 Model No. Gland plate, depth 250 mm 1 pc(s). 2 5001.222 Gland plate, depth 150 mm 1 pc(s). 3 5001.218 5001.219 Sliding panel, depth 150 mm 1 pc(s). 1 5001.239 5001.240 3m 1 2573.000 2573.000 Gland plate, depth 250 mm 1 pc(s). 2 5001.222 Gland plate, depth 150 mm 1 pc(s). 3 5001.218 5001.219 Sliding panel, depth 150 mm 1 pc(s). 1 5001.239 5001.240 Section for cable entry, centre 1 set(s) 1 8802.060 8802.080 Foam rubber cable clamp strip E Cable entry, centre A 5001.223 Model No. B 5 C D E 7 6 6 1 1 1 1 5 1 1 1 5 1 1 2 2 1 4 2 2 5 6 2 2 1 1 1 5001.223 Gland pate, depth 250 mm Gland plate, depth 150 mm Gland plate, depth 100 mm Gland plate, depth 50 mm Sliding panel, depth 150 mm 8 5 Also required: – Base mount, see page 524 Module plate, depth 237.5 mm Self-adhesive foam cable clamp strip Section for cable entry, centre Rittal Catalogue 34/System accessories 531 Base Base Trim panel For enclosure Width mm Depth mm Model No. 600 400 5001.130 800 400 5001.140 1000 400 5001.150 Surface finish: – Textured paint 1200 400 5001.160 1600 400 6730.030 Colour: – RAL 7035 600 500 6730.100 800 500 6730.110 1200 500 6730.120 1600 500 6730.130 for CM, TP To conceal the entire base opening with CM or as the cover for a TP pedestal. Material: – Sheet steel Protection category to IEC 60 529 – IP 55 Supply includes: – Assembly parts Gland plate module, vented for TS, TS-IT, SE Large perforated section for passive enclosure ventilation. For enclosure width mm Model No. 600 7825.360 800 7825.380 Gland plate depth: – 237.5 mm Supply includes: – Filter mat and nylon tape Gland plate module, one-piece, with brush strip for TS, TS-IT, SE For simple, sealed cable entry. Gland plate depth: – 237.5 mm Also required: – Base mount for installation in TS-IT, see page 524 – Gland plates for installation in TS-IT, see page 528 For enclosure width mm Model No. 600 7825.361 800 7825.381 Also required: – Base mount for installation in TS-IT, see page 524 – Gland plates for installation in TS-IT, see page 528 Gland plate module, two-piece, with brush strip for TS, TS-IT, SE Special brush strips with brush strips offset on alternate sides offer maximum possible protection with professional cable entry. The two-piece design even allows retrospective fitting of the base module with the cables already installed. Gland plate depth: – 237.5 mm Material: – Module plate: Sheet steel – Brush strip: Plastic, UL 94-V0 For enclosure width mm Packs of Model No. 600 1 pc(s). 7825.367 800 1 pc(s). 7825.387 Also required: – Base mount for installation in TS-IT, see page 524 – Gland plates for installation in TS-IT, see page 528 Surface finish: – Module plate: Zinc-plated Supply includes: – Assembly parts 532 Rittal Catalogue 34/System accessories Base Base Gland plate module for side cable entry for TS, TS-IT, SE With adjustable openings on both sides and rubber cable clamp strip. The two-piece design even allows retrospective fitting of the base module with the cables already installed. Supply includes: – Assembly parts For enclosure width mm Model No. 800 7825.388 Also required: – Base mount for installation in TS-IT, see page 524 – Gland plates for installation in TS-IT, see page 528 Pressure relief stoppers Packs of Model No. Especially when enclosures are exposed to changing climatic conditions (e.g. with outdoor siting), condensation may form in sealed enclosures due to pressure differences. The integral sealing membrane largely prevents such pressure differences and hence condensation; additionally, it also prevents the ingress of moisture from the outside. Installed in vertical surfaces to protect against dirt. 5 pc(s). 2459.500 Technical specifications: – Air permeability up to 120 litres/hour with a pressure difference of 70 mbar – Connection thread M12 x 1.5 – For fitting in wall thicknesses up to 4 mm Material: – Polyamide Colour: – Similar to RAL 9005 Protection category IP to IEC 60 529: – IP 66, 68 Protection category IP to DIN 40 050-9: – IP 69K Supply includes: – Lock nut Condensate discharge Packs of Model No. For reliable condensate discharge from the inside and protection against splashed water from the outside (labyrinth effect). A hole diameter of 16 mm is required. (With AE sheet steel, the holes are already provided in the base). 6 pc(s). 2459.000 Material: – Polyamide Colour: – Similar to RAL 7035 Protection category: – Protection from splashed water, when professionally installed at the bottom Rittal Catalogue 34/System accessories 533 Walls Side panels Side panels, screw-fastened, sheet steel For enclosures Height mm Depth mm Packs of Model No. 800 600 2 pc(s). 8173.235 1000 600 2 pc(s). 8174.235 1200 500 2 pc(s). 8115.235 1200 600 2 pc(s). 8170.235 1200 800 2 pc(s). 8175.235 1200 1000 2 pc(s). 8176.235 1400 500 2 pc(s). 8145.235 1400 600 2 pc(s). 8146.235 1400 800 2 pc(s). 8148.235 1600 500 2 pc(s). 8165.235 Colour: – RAL 7035 1600 600 2 pc(s). 8166.235 1600 800 2 pc(s). 8168.235 Protection category IP to IEC 60 529: – IP 55 1800 400 2 pc(s). 8184.235 1800 500 2 pc(s). 8185.235 Supply includes: – Assembly parts 1800 600 2 pc(s). 8186.235 1800 800 2 pc(s). 8188.235 Note: – Enclosure panel holders may optionally be fitted from the inside or outside of the enclosure. – Area available for population: External dimension -100 mm 1800 1000 2 pc(s). 8180.235 2000 400 2 pc(s). 8104.235 2000 500 2 pc(s). 8105.235 2000 600 2 pc(s). 8106.235 2000 800 2 pc(s). 8108.235 2000 1000 2 pc(s). 8100.235 2200 600 2 pc(s). 8126.235 2200 800 2 pc(s). 8128.235 for TS, TS-IT ◾ Automatic potential equalisation and higher EMC protection thanks to enclosure panel holders with earthing insert ◾ Easy positioning with the location aid ◾ Earthing bolt with contact surface Material: – Sheet steel 1.5 mm Surface finish: – Dipcoat-primed, powder-coated on the outside Accessories: – Earth straps, see page 644 – Enclosure panel holders, internal, see page 535, for heavy installed equipment and high dynamic loads Side panels, screw-fastened, stainless steel for TS ◾ Automatic potential equalisation and higher EMC protection thanks to enclosure panel holders ◾ Easy positioning with the location aid ◾ Earthing bolt with contact surface Material: – Stainless steel 1.4301 (AISI 304), 1.5 mm Surface finish: – Brushed, grain 400 For enclosures Packs of Model No. 400 2 pc(s). 8700.840 500 2 pc(s). 8700.850 600 2 pc(s). 8700.060 Height mm Depth mm 1800 1800 2000 Accessories: – Enclosure panel holders, internal, see page 535, for heavy installed equipment and high dynamic loads Protection category IP to IEC 60 529: – IP 55 Supply includes: – Assembly parts 534 Rittal Catalogue 34/System accessories Walls Side panels Baying frame, IP 66/NEMA 4, NEMA 4X for TS For baying enclosure systems. ◾ Automatic potential equalisation and higher EMC protection thanks to enclosure panel holders ◾ Easy positioning with the location aid ◾ Foamed-in on both sides For enclosures Height mm Depth mm Packs of Model No. 2000 600 1 pc(s). 8700.010 Material: – Stainless steel 1.4301 (AISI 304), 1.5 mm Surface finish: – Brushed, grain 400 Protection category IP to IEC 60 529: – IP 66 NEMA protection category: – NEMA 4 – NEMA 4x Supply includes: – Assembly parts Enclosure panel holders, internal Packs of Model No. 10 pc(s). 8800.071 for TS For additional fixing of the side or rear panel with heavy installed equipment and high dynamic loads. Hinges for side panel, screw-fastened, sheet steel The 180° opening angle allows unhindered access. May be installed optionally from the inside or outside of the enclosure. Replace the 3 enclosure panel holders with hinges. Despite the hinge, the protection category of the enclosure is retained. Material: – Die-cast zinc Supply includes: – Assembly parts Rittal Catalogue 34/System accessories Colour Packs of Model No. RAL 7035 6 pc(s). 8800.110 Note: – Side panel and door hinges may only be installed on the same enclosure section when using a 180° door hinge (see page 574) – Please note: Red areas (side panels), hinged and unhinged, must always be opposite one another, and blue areas (doors/rear panels) must always be opposite one another – Only one surface on each vertical enclosure section may be hinged 535 Walls Side panels Side panel, divided for TS-IT ◾ Easy handling and tool-free assembly ◾ Quick-release fastener including security lock 3524 E ◾ Internal latch included (cannot be opened with a key) ◾ Lock with chassis, cable clamp rail may be top-mounted on the outer mounting level ◾ Suitable for IT climate control and rack fire extinguishing For enclosures Packs of Model No. 800 1 pc(s). 5501.000 600 1 pc(s). 5501.010 2000 800 1 pc(s). 5501.020 2000 1000 1 pc(s). 5501.030 2000 1200 1 pc(s). 5501.040 2200 800 1 pc(s). 5501.050 2200 1000 1 pc(s). 5501.060 2200 1200 1 pc(s). 5501.070 Packs of Model No. Height mm Depth mm 1800 2000 Material: – Sheet steel Surface finish: – Powder-coated Colour: – RAL 7035 Supply includes: – 1 top piece – 1 bottom piece – Earth conductor – Assembly parts Side panel, lockable for TS, TS-IT ◾ Simply locate from above ◾ Lock via security lock no. 3524 E ◾ Earthing bolt with contact lug For enclosures Height mm Depth mm 1200 800 2 pc(s). 7824.128 1200 1000 2 pc(s). 7824.120 1800 800 2 pc(s). 7824.188 Material: – Sheet steel 2000 600 2 pc(s). 7824.206 2000 800 2 pc(s). 7824.208 Surface finish: – Powder-coated 2000 1000 2 pc(s). 7824.200 2200 800 2 pc(s). 7824.228 Colour: – RAL 7035 2200 1000 2 pc(s). 7824.220 Internal latch for side panel, lockable Additional security is achieved via the option of latching the side panel from the inside. The side panels on the frame section are screw-fastened from the inside with latching brackets. For enclosure system Packs of Model No. TS 4 pc(s). 7824.510 Supply includes: – Assembly parts Paint For touching up and repairing powder-coated and wet-painted surfaces, air-drying. Colour RAL Model No. Touch-up pen 12 ml 7035 2436.735 Tin 1000 ml 7035 2438.735 7022 2581.000 7035 2440.735 Spray can 150 ml 536 Rittal Catalogue 34/System accessories Walls Divider panels/partitions Divider panel for TS For shielding individual enclosure cells. Thanks to the symmetry of the frame system, the divider panel can also be used at the rear. All-round, double fold for stability and to hold the seal. Notches in the corners and half-way up the sides permit the use of angular baying brackets and baying brackets, even with a divider panel fitted. For mounting on the outer mounting level. This leaves the inner level free for further population. For enclosures Model No. Height mm Depth mm 1800 400 8609.840 1800 500 8609.850 1800 600 8609.860 2000 400 8609.040 2000 500 8609.050 2000 600 8609.060 2000 800 8609.080 2200 600 8609.260 Material: – Sheet steel, 1.5 mm 302/402/502/702 Surface finish: – Zinc-plated Protection category to IEC 60 529: – IP 54 Supply includes: – Assembly parts 289/389/489/689 Note: – The divider panel can also be fitted at the rear, allowing e.g. frequency converters for heat dissipation to be installed in a divider panel with the cooling units facing outwards and protected/ finished off with a cover (see page 540). 247/347/447/647 1702/1902/2102 Accessories: – Cover with door, see page 540 – Baying bracket, vertical, 8800.470 for enclosures with fitted divider panel, see page 546 Partition for TS-IT For rack mounting, suspended between two enclosures. With three Ø 40 mm holes in all 4 corner areas for the insertion of cables, conduits etc. Drilled holes may be sealed with the enclosed stepped collars. For cable entry, simply cut off at a suitable level to match the required cross-section. Material: – Partition: Sheet steel – Stepped collar: Plastic to UL 94-HB Surface finish: – Partition: Zinc-plated Rittal Catalogue 34/System accessories For enclosures Model No. Height mm Depth mm 2000 1000 7831.723 2000 1200 7831.724 Note: – Not suitable for use in conjunction with a baying seal. Any existing seals must be removed prior to installation Accessories: – Baying clamp 8800.490, see page 544 537 Walls Divider panels/partitions The divider panel and module plate system More options: The cut-outs of a divider panel are individually equipped with module plates for 16-pole or 24-pole connectors, with module plates for cable entry and with solid module plates. Faster assembly: Usually only some of the total number of connector cut-outs are used. Thanks to the new divider panel technique, the cut-outs do not need to be covered individually. The solid module plate is used instead. The benefit: Less plates, less screws, less assembly work. Divider panel 402/502 318 99/105 188 144 for module plates TS With cut-outs for the installation of module plates for connectors or for cable entry, and also for the entry of busbar systems and other installed equipment. All-round, double fold for stability and to hold the seal. Thanks to the symmetry of the enclosure frame, divider panels may also be fitted at the rear, dimensions permitting. For mounting on the outer mounting level. This leaves the inner level free for further population. 8 x 188 (1504)/9 x 188 (1692) Surface finish: – Zinc-plated Supply includes: – Assembly parts and multi-tooth screws M5 x 12 mm for mounting the module plates. Note: – Notches in the corners and half-way up the sides permit the use of angular baying brackets and baying brackets, even with a divider panel fitted 1702/1902 Material: – Sheet steel, 2 mm Accessories: – Module plates, see page 539 – Cover with door, see page 540 – Baying attachment 8800.470 for enclosures with fitted divider panel, see page 546 For enclosures 538 Height mm Depth mm Number of cut-outs Model No. 1800 500 9 8609.100 1800 600 9 8609.110 2000 500 10 8609.120 2000 600 10 8609.130 Rittal Catalogue 34/System accessories Walls Divider panels/partitions Module plates Design Cut-outs Packs of Model No. Material: – Sheet steel, 2 mm Solid – 1 pc(s). 8609.160 For 16-pole connectors 4 1 pc(s). 8609.150 For 24-pole connectors 4 1 pc(s). 8609.140 Surface finish: – Zinc-plated Supply includes: – Seal For cable entry 1 1 pc(s). 8609.170 With cable sleeve 1 1 pc(s). 8609.390 Solid For sealing unused cut-outs. Easily machined for individual cut-outs. For 16/24-pole connectors With cut-outs to accommodate connectors. In addition to mounting on divider panels, module plates may also be attached to the 25 mm pitch pattern of the enclosure and to the rails of the TS/PS system. For cable entry For the entry of pre-assembled cables. Sealed, secure routing is achieved via adjustable angle brackets with inserted foam cable clamp strip. Attachment bracket, punched, for cable clamping. Accessories: – Adaptor, cover plate, see page 540 – Connector gland for connector cut-outs, see page 660 – Connector gland sealing frame and sealing module, see page 661 Accessories: – Cable tie for fast assembly 2597.000, see page 667 With cable sleeve For 10 – 65 mm cable diameters. The flexible grommet adapts to the cable’s bending radius. Rittal Catalogue 34/System accessories 539 Walls Divider panels/partitions Adaptor For reduction Packs of Model No. for connector cut-outs For using connectors with varying numbers of poles. From 24 to 16 poles 5 pc(s). 2479.000 From 24 to 10 poles 5 pc(s). 2480.000 Material: – Sheet steel From 24 to 6 poles 5 pc(s). 2481.000 From 16 to 10 poles 5 pc(s). 2401.000 From 16 to 6 poles 5 pc(s). 2402.000 Surface finish: – Zinc-plated Supply includes: – Seal and assembly parts Cover plate for connector cut-outs For unused cut-outs. For Packs of Model No. 24-pole cut-outs 20 pc(s). 2477.000 16-pole cut-outs 20 pc(s). 2478.000 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Seal and assembly parts Cover with door for TS ◾ To protect and finish off connectors or other installed equipment. ◾ Optional cable entry from above or below Material: – Cover: Sheet steel, 1.5 mm – Door: Sheet steel, 2.0 mm Colour: – RAL 7035 Supply includes: – Cover – Door with locking rod and double-bit lock insert – 1 cover plate for top or bottom 540 For enclosures Height mm Depth mm Model No. 2000 500 8609.020 2000 600 8609.030 Accessories: – Lock inserts, type F, see page 570 – Comfort handle, see page 564 – 180° hinge, see page 574 Rittal Catalogue 34/System accessories Walls Isolator door locking TS isolator door cover (US version) Including main door lock for safety locking of enclosures and bayed enclosure suites in accordance with US regulations, only in conjunction with actuator lever for master switches: ◾ Allen Bradley 1494 F-M1/P1/S1 and 140 U-K-FCX04 ◾ Square D 9422 A1 ◾ Siemens actuator for Max-Flex drives for moulded-case circuit-breakers in the SENTRON series (ED, FD, LD, JD; not for Siemens air circuit-breaker 3VL) US Model No.: FHOH ◾ General Electric TDA Type 1 and 2 ◾ Moeller NZM-XSHGVR 12-NA Benefits: ◾ In combination with – Operating mechanism – Adjacent door latch – Interconnecting rods meets the requirements of UL 508 A ◾ Compact design with 125 mm width, may optionally be fitted on the left or right of the enclosure. With this cover, all standard singledoor TS 8 enclosures may be configured as isolator door enclosures. The complete installation surface of the enclosure is retained. ◾ In conjunction with the integrable TS mounting plate infill, (see page 591), the mounting surface of the main enclosure can be enlarged by around 14%. ◾ Cover may only be mounted on a single-door enclosure with tubular door frame Width mm Height mm Depth mm Model No. 100 1800 400 8950.840 100 1800 500 8950.850 100 2000 500 8950.050 100 2000 600 8950.060 Also required: – Operating mechanism, 4912.000, for enclosure with isolator door cover and additionally every fourth adjacent enclosure, see page 541 – Adjacent door latch, 4911.000, 4911.100, for every adjacent enclosure, see page 541 – Interconnecting rods, for every adjacent enclosure in the appropriate enclosure width, see page 541 – Side panel TS, screw-fastened, see page 534 Accessories: – Mounting plate infill, see page 591 Isolator door locking (US version) Operating mechanism Adjacent door latch (single-door) Interconnecting rod Connection component Main door latch Adjacent door latch (two-door) Material: – Sheet steel Side panel TS, screw-fastened Surface finish: – Powder-coated 3 4 Colour: – RAL 7035 Protection category to IEC 60 529: – IP 55 6 6 4 3 2 3 2 1 5 7 Nema protection category: NEMA 12 7 Supply includes: – Main door lock, cover plate and assembly parts 125 Technical details: Available on the Internet Door latch for bayed enclosure suites For extending the door locking of commercially available master switches to bayed suites TS. Adjacent doors cannot be opened until the main door has been opened. 1 Operating mechanism Fitted in the enclosure with main switch and additionally in every fourth adjacent enclosure Adjacent door latch Fitted in adjacent enclosure Packs of Model No. Operating mechanism 1 pc(s). 4912.000 Adjacent door latch for Packs of Model No. Single-door enclosures 1 pc(s). 4911.000 Two-door enclosures 1 pc(s). 4911.100 2 3 Interconnecting rods To extend locking from the main enclosure to the adjacent enclosures of a bayed suite. An interconnecting rod corresponding to the width of the enclosure is required for each adjacent enclosure. Rittal Catalogue 34/System accessories For enclosure width mm Packs of Model No. 600 10 pc(s). 4916.000 800 10 pc(s). 4918.000 1200 10 pc(s). 4920.000 541 Baying system Enclosure suites Bayable on all sides Whether around corners, forwards, backwards, to the left or right or even upwards if required, the baying options are unlimited. For baying at the installation site or for provisional siting in the workshop Quick-fit baying clamp, one-piece Quick-fit baying clamp, three-piece 5 Baying clamp, horizontal Baying clamp, vertical for TS/TS 2 Baying clamp, vertical for TS/PS Baying connector, external Notes on the transportation of bayed enclosures, see page 544. 4 1 3 1 6 542 Rittal Catalogue 34/System accessories Baying system Enclosure suites Quick-fit baying clamp, one-piece Packs of Model No. 6 pc(s). 8800.500 Packs of Model No. 6 pc(s). 8800.590 Baying clamp, horizontal Packs of Model No. for TS/TS, TS/PS For mounting on the horizontal enclosure sections. 4 pc(s). 8800.400 Baying clamp, vertical Packs of Model No. for TS/TS For mounting on the vertical enclosure sections. 6 pc(s). 8800.410 for TS/TS Simply attach the screws, insert the quick-fit baying clamp, tap in with a hammer and lock. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Quick-fit baying clamp, three-piece for TS/TS Simply locate, connect with the lock plate, and secure. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Material: – Cast steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Rittal Catalogue 34/System accessories 543 Baying system Enclosure suites Baying clamp, vertical Packs of Model No. for TS/PS For mounting on the vertical enclosure sections. 6 pc(s). 8800.420 Material: – Cast steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Baying connector, external for TS/TS For mounting on the vertical enclosure sections. Simply position on the outside and screw-fasten either from the inside or outside. Material/surface finish Packs of Model No. Sheet steel, zinc-plated 6 pc(s). 8800.490 Stainless steel 1.4301 (AISI 3304) 6 pc(s). 8700.000 Supply includes: – Assembly parts Notes on the transportation of bayed enclosures Individual enclosures may be safely transported using the eyebolts included with the supply. For symmetrical loads, the following maximum permissible loads apply: at 45° cable pull angle 4,800 N, at 60° cable pull angle 6,400 N, at 90° cable pull angle 13,600 N. Note: – The eyebolts must be aligned in the direction of the cable pull 544 For the enclosure combination with angular baying brackets, quick-fit baying clamps and combination angles shown here, the load capacity with a cable pull angle of 60° is as follows: for the left-hand enclosure 7,000 N, for the middle enclosure 14,000 N, for the right-hand enclosure 7,000 N. The cable pull angle between the roof plate and the cable has a significant influence on the total permissible load. The cable pull angle must not be less than 45°, and ideally not less than 60°. Rittal Catalogue 34/System accessories Baying system Enclosure suites When transporting bayed enclosures Baying bracket for TS/TS Baying bracket for TS/TS and TS/PS Note: – In addition, an external baying connector (see page 544), can be used for reinforcement. – When transporting large, heavy enclosure combinations by crane, we additionally recommend the use of combination angles 4540.000, see page 546 Also required: – For protection category IP 55: One quick-fit baying clamp is required half-way up the enclosure height, see page 543 Notes on the transportation of bayed enclosures, see page 544 Example A 2 quick-fit baying clamps 8800.500 (see page 543) 1 4 angular baying brackets 8800.430 (see page 545) 7 A Example B 2 quick-fit baying clamps 8800.500 (see page 543) 8 2 angular baying brackets 8800.430 (see page 545) 4 baying brackets 4582.500 (see page 546) if the angular baying brackets cannot be fitted in the foremost installation position due to installed equipment such as large swing frames. 1 B 7 8 7 8 Angular baying bracket for TS/TS For a stable connection when transporting bayed enclosure suites. Packs of Model No. 4 pc(s). 8800.430 Screw-fastening either ◾ Horizontally or vertically with 8 screws ◾ Horizontally with 2 screws and M8 threaded blocks, vertically with 4 screws is supported. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Rittal Catalogue 34/System accessories 545 Baying system Enclosure suites Baying brackets for TS/TS and TS/PS For additional stabilisation, or in cases where for example ◾ Mounting plate brackets ◾ Swing frames ◾ Busbar supports prevent the installation of angular baying brackets Material: – Sheet steel Packs of Model No. 4 pc(s). 4582.500 Accessories: – For mounting on the vertical TS enclosure section: Snap-on nut M8, 8800.808, see page 618 Surface finish: – Zinc-plated Supply includes: – Assembly parts Angular baying brackets Packs of Model No. The alternative to baying bracket 4582.500 and for individual interior installations. 4 pc(s). 4582.000 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Also required: – For mounting on the horizontal TS enclosure section: Captive nuts/threaded blocks M8, see page 624 – For mounting on the vertical TS enclosure section: Snap-on nut M8, 8800.808, see page 618 Combination angle Packs of Model No. For optimum distribution of tensile forces during transportation of bayed enclosures by crane. 4 pc(s). 4540.000 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Accessories: – Top baying cover, see page 548 Notes on the transportation of bayed enclosures, see page 544 Baying attachment, vertical Packs of Model No. for TS/TS with divider panel Only suitable for mounting in conjunction with the angle brackets of the divider panel (included with the supply). 8 pc(s). 8800.470 Material: – Sheet steel Surface finish: – Zinc-plated Note: – May also be used for side or rear wall attachment/fastening of enclosures. In such cases, additional holes must be drilled in the side or rear panel. Supply includes: – Assembly parts 546 Rittal Catalogue 34/System accessories Baying system Enclosure suites Baying attachment, vertical Packs of Model No. for TS/TS For baying two populated enclosures on the vertical enclosure section. Simply locate into the vertical TS punchings, secure and connect both brackets using the hex screws (supplied loose). Using the fastening bolts, the enclosure is pulled into a defined end position, with a height or side offset of up to ± 2 mm. 6 pc(s). 8800.670 Baying cover, vertical Packs of Model No. To balance out the gap between the side panels when baying back-to-back. For enclosure height 2200 mm, or may be cut to length individually for lower heights. 2 pc(s). 8800.870 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Material: – Cover section: Plastic Also required: – Baying connector, external, 8800.490, see page 544 Colour: – RAL 7035 Supply includes: – Assembly parts Baying clamp, horizontal Packs of Model No. for back-to-back mounting Two-piece, for in situ assembly of enclosures with mounting plate in the rearmost installation position. 4 pc(s). 8800.170 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Rittal Catalogue 34/System accessories 547 Baying system Enclosure suites Baying cover, top A cover with two end caps may additionally be clipped over the seal between the two enclosures. This prevents dirt and liquid from collecting on the baying seal. Supply includes: – Assembly parts – 2 end caps Note: – May also be fitted in the width with enclosure suites bayed back-to-back – May also be used in conjunction with dust guard trim, see page 581 Stainless steel Model No. 1.4301 (AISI 304) For enclosure depth mm Packs of Plastic RAL 7035 400 1 pc(s). ◾ – 8800.845 500 1 pc(s). ◾ – 8800.855 600 1 pc(s). ◾ – 8800.865 800 1 pc(s). ◾ – 8800.885 1200 1 pc(s). ◾ – 8800.825 400 1 pc(s). – ◾ 8700.140 500 1 pc(s). – ◾ 8700.150 600 1 pc(s). – ◾ 8700.160 Baying connector, external Packs of Model No. for TS-IT/TS-IT with side panels For retrospective baying of enclosures with screwfastened or lockable side panels. 4 pc(s). 7824.540 Packs of Model No. 1 set(s) 1199.100 Material: – Sheet steel Colour: – RAL 7035 Supply includes: – Assembly parts Baying kit for KL, AE Special screws and nuts ◾ For fast, simple assembly without thread-tapping ◾ Compression of the seal is limited to a predefined level, to ensure a long-lasting, permanent seal between enclosures Seal, self-adhesive ◾ Comprised of bayable sealing elements and corner pieces, for individual adaptation to various enclosure sizes One pack is sufficient for a baying point up to H x D = 800 x 350 mm. Supply includes: – Sealing elements – Assembly parts 548 Rittal Catalogue 34/System accessories Doors/locks Door variants Tubular door frame for TS, TS-IT, SE To fit sheet steel doors prepared for a tubular door frame. For doors Packs of Model No. 2000 1 set(s) 5501.200 2000 1 set(s) 5501.210 Width mm Height mm 300 400 Material: – Tube section: Sheet steel – Corner connectors: Plastic Surface finish: – Tube section: Zinc-plated Supply includes: – Assembly parts Glazed door for TS, TS-IT Instead of a sheet steel door or rear panel. Material: – Frame: Extruded aluminium section – Corner pieces: Die-cast zinc – Viewing window: Single-pane safety glass, 3 mm Surface finish: – Powder-coated Colour: – Frame and corner pieces: RAL 7035 – Viewing window (printed mask on the inside): RAL 9005 Protection category IP to IEC 60 529: – IP 55 For enclosures Width mm Height mm Model No. 600 1800 8610.685 800 1800 8610.885 600 2000 8610.605 800 2000 8610.805 600 2200 8610.625 800 2200 8610.825 Also required: – When mounting instead of the rear panel: Lock components for frame 8800.040, see page 550 Supply includes: – Glazed door frame with safety glass – Locking rod with double-bit lock insert – 180° hinges (4) – Visible area: W -140 mm, H -160 mm Handle adaptor The handle adaptor compensates for the design chamfer in the door profile to enable installation of the comfort handle. Material: – Plastic Supply includes: – 1 adaptor plate – 1 bolt to extend the screw-on dome – 2 assembly screws Rittal Catalogue 34/System accessories For glazed door TS Colour Model No. RAL 7035 8611.080 For designer door IW and PC, bottom door Colour Model No. RAL 7035 8611.300 549 Doors/locks Door variants Lock components Packs of Model No. for TS, TS-IT, SE For retrofitting a glazed door or sheet steel door in place of a rear panel. 4 pc(s). 8800.040 Material: – Die-cast zinc Supply includes: – Assembly screws Glazed door, vented for TS, TS-IT, SE With 180° hinges and comfort handle with security lock no. 3524 E. Surface perforated on both sides with air inlet openings > 78 % for optimum air throughput. Material: – Door: Sheet steel – Viewing window: Single-pane safety glass, 3 mm Surface finish: – Powder-coated For enclosures Width mm Height mm Model No. 600 2000 7824.201 800 2000 7824.202 800 2200 7824.222 Accessories: – 180° hinge for bayed TS enclosure suites with comfort handle, see page 574 Colour: – RAL 7035 Supply includes: – 4 enclosure hinges – Assembly parts Lockable and adjacent door for TS, TS-IT, SE For example, if two 400 mm doors instead of one 800 mm wide door are used to comply with escape routes. Material: – Sheet steel Surface finish: – Dipcoat-primed, Powder-coated on the outside For enclosures Width mm Height mm 800 2000 Colour RAL Model No. 7035 8801.450 Accessories: – Lock system, see page 564 Supply includes: – 2 doors, including tubular door frame, hinges and lock parts 550 Rittal Catalogue 34/System accessories Doors/locks Door variants Protective bars for TS, SE As an alternative to a door, e.g. in sealed switch rooms. Prevents people from falling into the open enclosure frame. Easily removable for maintenance purposes. For 1200 mm enclosure width; may be shortened or divided for other sizes. Length mm Packs of Model No. 1200 1090 1 pc(s). 8801.010 Enclosure width mm Material: – Wood, spray-finished, RAL 3000 L 60 x 40 1) 65 For enclosure width mm Clearance between the enclosure frame (B3) mm Length of protective bar (L) mm 400 312 2901) 600 512 4901) 800 712 6901) 1000 912 8901) 1200 1112 1090 The protective bar 8801.010 (1090 mm) will need to be shortened 40 B3 Holder Packs of Model No. for protective bars For mounting on the vertical section. The protective bar is simply inserted. 2 pc(s). 8801.000 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws Variable modular climate control concept Instead of an enclosure door in a 600 mm/800 mm/ 1200 mm wide and 1800 mm/2000 mm high TS enclosure, section doors with integral cooling module may be retrofitted without major assembly work. Rittal Catalogue 34/System accessories Possible alternative: – Modular climate control concept, see page 350/351 551 Doors/locks Installation accessories for modular front design TS Modular front design 1 3 4 4 for baying systems TS 8 (see page 76) Suitable for 400, 600 and 800 mm wide TS enclosures instead of a door or rear panel. The partial doors with and without viewing panels including cross members may be combined with one another as required. A trim panel is required at the top and bottom in each case. The requirements for your individual front design and the considerations which must be taken into account are illustrated on the sample configuration opposite. Protection category IP to IEC 60 529: – IP 54 for a completed enclosure Front trim panel, top Front trim panel, bottom Partial door with viewing window Partial door 2 Partial doors Height mm With viewing window Packs of Model No. 150 – 1 pc(s). 9672.141 200 – 1 pc(s). 9672.142 300 – 1 pc(s). 9672.143 400 – 1 pc(s). 9672.144 600 – 1 pc(s). 9672.146 800 – 1 pc(s). 9672.148 Material: – Partial door: Sheet steel, 2 mm – Viewing window: 3 mm single-pane safety glass 1000 – 1 pc(s). 9672.140 1600 – 1 pc(s). 9672.156 1800 – 1 pc(s). 9672.158 Surface finish: – Textured paint 2000 – 1 pc(s). 9672.150 Colour: – RAL 7035 Supply includes: – Cross member, hinges and lock parts. – Assembly parts Also required: – Front trim panels, top, see page 553 or Trim panel, hinged at the top, see page 554 – Front trim panels, bottom, see page 553 Accessories: – – – – Monitor frame 2305.000, see page 558 Lock inserts, type F, see page 570 Comfort handle, see page 564 Perforated mounting strips, see page 553 Technical details: Available on the Internet 552 For enclosure width 400 mm for TS The door may be optionally hinged on the right or left. The partial door is attached to the TS enclosure with no drilling required. In the case of partial doors without a viewing panel (height 600 – 1000 mm), monitor frame 2305.000 may be installed. Standard double-bit lock insert may be exchanged for lock inserts, type F, and from a height of 600 mm, for comfort handles. For enclosure width 600 mm Height mm With viewing window Packs of Model No. 150 – 1 pc(s). 9672.161 200 – 1 pc(s). 9672.162 300 – 1 pc(s). 9672.163 400 – 1 pc(s). 9672.164 600 – 1 pc(s). 9672.166 600 ◾ 1 pc(s). 9672.167 800 – 1 pc(s). 9672.168 800 ◾ 1 pc(s). 9672.169 1000 – 1 pc(s). 9672.160 1600 – 1 pc(s). 9672.176 1800 – 1 pc(s). 9672.178 2000 – 1 pc(s). 9672.170 For enclosure width 800 mm Height mm With viewing window Packs of Model No. 150 – 1 pc(s). 9672.181 200 – 1 pc(s). 9672.182 300 – 1 pc(s). 9672.183 400 – 1 pc(s). 9672.184 600 – 1 pc(s). 9672.186 600 ◾ 1 pc(s). 9672.187 800 – 1 pc(s). 9672.188 1000 – 1 pc(s). 9672.180 1600 – 1 pc(s). 9672.196 1800 – 1 pc(s). 9672.198 2000 – 1 pc(s). 9672.190 Rittal Catalogue 34/System accessories Doors/locks Installation accessories for modular front design TS Perforated mounting strips for partial doors For retrospective external mounting. The perforated mounting strips have a 25 mm pitch pattern of holes and may be used for individual mountings on the rear side of the door, e.g. cable ducts, hose holders etc. For For enclosure Length partial door width mm height mm mm Packs Model No. of 400 298 150 – 800 10 pc(s). 9671.204 600 498 150 – 800 10 pc(s). 9671.206 800 698 150 – 800 10 pc(s). 9671.208 Hole diameter of perforated mounting strip: 4.5 mm Material: – Sheet steel, 1 mm Surface finish: – Zinc-plated Supply includes: – Assembly parts Front trim panels, top for TS To finish off the modular front design at the top when using partial doors. The front trim panels may be removed from the outside by unscrewing. The cross member required for mounting is included with the supply of the mounted partial door. Material: – Sheet steel, 2 mm For enclosure width mm Height mm Packs of Model No. 400 100 1 pc(s). 9672.314 400 300 1 pc(s). 9672.324 600 100 1 pc(s). 9672.316 600 300 1 pc(s). 9672.326 800 100 1 pc(s). 9672.318 800 300 1 pc(s). 9672.328 Surface finish: – Textured paint Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 54 Supply includes: – Assembly parts Front trim panels, bottom for TS To finish off the modular front design at the bottom when using partial doors. If version IP 2X is chosen, a roof plate with protection category IP 2X should be selected for top ventilation. The front trim panels may be removed from the outside by unscrewing. Material: – Sheet steel, 2 mm Surface finish: – Textured paint Colour: – RAL 7035 Supply includes: – Front trim panel including cross member – Assembly parts Protection category IP 54 For enclosure width mm Height mm Packs of Model No. 400 100 1 pc(s). 9672.334 400 300 1 pc(s). 9672.344 600 100 1 pc(s). 9672.336 600 300 1 pc(s). 9672.346 800 100 1 pc(s). 9672.338 800 300 1 pc(s). 9672.348 Protection category IP 2X For enclosure width mm Height mm Packs of Model No. 400 300 1 pc(s). 9672.354 600 300 1 pc(s). 9672.356 800 300 1 pc(s). 9672.358 Also required: Roof plate IP 2X, see page 583 Accessories: Upgrade kit IP 4X, see page 555 Rittal Catalogue 34/System accessories 553 Doors/locks Installation accessories for modular front design TS Trim panel, hinged at the top for TS For the installation of control and display components, in conjunction with ◾ Modular front design ◾ Protective bar TS Material: – Sheet steel, 2 mm Width mm Height mm Packs of Model No. 600 300 1 pc(s). 8801.230 800 300 1 pc(s). 8801.240 1200 300 1 pc(s). 8801.250 Note: – Not in combination with top-mounted module for TS (see page 582) Surface finish: – Textured paint Accessories: Colour: – RAL 7035 – Stay for trim panel, hinged at the top see page 554 – Lock inserts, version A, see page 570 Supply includes: – Hinges, cam locks with double-bit insert and assembly parts 2 592/792/1192 287 45 6 80 80 1 47 3 20 5 4 Only for width 800 mm and 1200 mm Only for width 1200 mm Usable interior area Optional: Stay 8801.260 Drawer for TS For mouse and keyboard with a maximum width of 500/700 mm. A high level of protection is retained, even with the flap open. Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, plastic handles, type B and T handles, type B. Material: – Sheet steel Colour: – RAL 7035 15 6.5 46 7 Maximum opening angle with stay approx. 85° Maximum opening angle without stay approx. 190° Earthing bolt M8 Height mm Width mm Model No. 200 600 8801.715 200 800 8801.915 Supply includes: – Flap and assembly parts – Cross member Accessories: – 27 mm lock inserts, type A, see page 570 – Plastic handle, type B, see page 569 – T handles, type B, see page 569 Stay Packs of Model No. for trim panel, hinged at the top 5 pitch pattern positions up to a maximum opening angle of approx. 85°. 2 pc(s). 8801.260 Material: – Sheet steel Surface finish: – Zinc-plated 554 Rittal Catalogue 34/System accessories Doors/locks Installation accessories for modular front design TS Upgrade kit IP 4X for front trim panels, bottom To increase the protection category of the bottom front trim panel from IP 2X to IP 4X. The upgrade kit is attached to the front trim panel from the inside and secured. For enclosure width mm For front trim panel height mm Packs of Model No. 400 300 1 pc(s). 9672.384 600 300 1 pc(s). 9672.386 800 300 1 pc(s). 9672.388 Material: – Sheet steel (expanded metal) Surface finish: – Zinc-plated Supply includes: – Assembly parts Wiring system for Ri4Power with internal compartmentalisation The wiring system facilitates vertical and horizontal cable routing in conjunction with internal Form 2-4 separation. For vertical cable routing, pre-punched cut-outs are provided in the mounting brackets for compartment dividers, which can easily be knocked out and used to install a vertical wiring channel. Wiring trim panel Inner front cover of the main busbar system with the option of mounting a wiring channel size W x D 40 x 20 mm. For use in Ri4Power switchgear with 300 mm high front trim panels. Horizontal cable routing occurs behind the front trim panels. This entails fitting a wiring trim panel which is suitable for accommodating a wiring channel while at the same time concealing the busbar system. For enclosure width mm Packs of Model No. 400/600 1 set(s) 9674.550 800/1000/1200 1 set(s) 9674.560 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Rittal Catalogue 34/System accessories 555 Doors/locks Viewing panels/operating panels 30 section System window To conceal display and operating instruments or cut-outs, and to protect against dirt and liquids as well as unauthorised access. To fit TS, SE with width mm Window size, exterior mm W Model No. H Consisting of the following 2 components: 270 2735.500 1. Base frame: ◾ Easily screw-fastened to the door thanks to modified dimensions (tubular door frame may be used as a drilling template). ◾ Readily height-adjustable ◾ Stabilises the door cut-out ◾ Conceals the cut edge ◾ The rain canopy – prevents dirt from landing on the seal – protects the glass from being lifted out – prevents the ingress of dirt and moisture when opening the window ◾ Frame section height 30 mm or 60 mm 370 2735.510 470 2735.520 570 2735.530 670 2735.540 270 2735.560 370 2735.570 470 2735.580 570 2735.590 670 2735.250 600 800 500 700 2. Viewing window: ◾ Made from single-pane safety glass: – High level of resistance to solvents and scratches – Anti-static – Reduced risk of injury if broken ◾ Cam lock with double-bit insert, may be exchanged for lock inserts, type A, and semicylinders in the Ergoform-S lock system (not with 2735.500 and .560) ◾ Hinge with 180° opening angle, easily inserted 60 section Material: – Extruded aluminium sections with die-cast zinc corner pieces and single-pane safety glass Standard double-bit lock insert may be exchanged for 27 mm lock inserts, version A, see page 570 and Ergoform-S lock system (except H = 270 mm), see page 568 To fit TS, SE with width mm 600 800 Window size, exterior mm W Model No. H 500 700 370 2736.510 470 2736.520 570 2736.530 670 2736.540 670 2736.500 Surface finish: – Base frame: Powder coated in RAL 7035 – Hinge and lock section: Natural anodised. Protection category to IEC 60 529: – IP 54 B 85 B – 137 52 47 X h – 70 h–2 H b – 70 View X for profile height 30 View Y for profile height 60 63 33 Y Viewing area (B -137) offset by 16.5 mm towards the hinge side 556 Rittal Catalogue 34/System accessories Doors/locks Viewing panels/operating panels Viewing window Depth = 34 mm For mounting on ◾ AE instead of door ◾ Surfaces For use as door variant with Width mm Height mm Model No. 1050.500, 1350.500 1007.600 497 497 2733.000 Max. installation depth: (depth -4 mm) Visible area: (width -60 mm) x (height -60 mm) – 597 197 2734.000 1039.500, 1339.500 1009.600, 7641.000 597 377 2730.000 1010.500, 1054.500 1060.500, 1360.500 7643.000 597 597 2731.000 1012.500, 1076.500 1376.500, 7645.000 597 757 2732.000 For use as door variant with Width mm Height mm Model No. 1050.500, 1350.500 1007.600 497 497 2763.000 1039.500, 1339.500 1009.600, 7641.000 597 377 2760.000 1010.500, 1054.500 1060.500, 1360.500 7643.000 597 597 2761.000 1012.500, 1076.500 1376.500, 7645.000 597 757 2762.000 Material: – Frame: Aluminium, natural anodised. – Glass panel: Acrylic Protection category IP to IEC 60 529: – IP 54 Supply includes: – Plastic handle with lock insert no. 3524 E. Depth = 60 mm Horizontally hinged FT stay Packs of Model No. A gas pressurised spring holds the viewing window securely open (top or side). When the viewing window is closed, the gas pressurised spring disappears into the frame section. 2 pc(s). 2772.000 Acrylic glazed cover With security lock, lock no. 3524 E Material: – Frame: Extruded aluminium sections with die-cast corner pieces – Glass panel: Smoked acrylic Protection category IP to IEC 60 529: – IP 54 Acrylic glazed covers, 482.6 mm (19˝) U Width mm Height mm Depth mm Model No. 3 320 158 47.5 2780.000 3 534 158 47.5 2781.000 6 534 291.5 47.5 2782.000 9 534 425 47.5 2796.000 Max. installation depth: 43 mm Visible area: (width -40 mm) x (height -20.5 mm) Metric acrylic glazed covers Width mm Height mm Depth mm Model No. 400 200 47.5 2784.000 400 400 47.5 2785.000 500 200 47.5 2786.000 500 400 47.5 2787.000 600 200 47.5 2788.000 600 400 47.5 2789.000 Max. installation depth: 43 mm Visible area: (width -40 mm) x (height -20.5 mm) Rittal Catalogue 34/System accessories 557 Doors/locks Viewing panels/operating panels Stainless steel Fitted as standard with internal 130° hinges and all-round seal. The double-bit lock insert may be exchanged for 27 mm lock inserts, type A, and Ergoform-S handle 2452.000. Material: – Stainless steel 1.4301 (AISI 304) Single-pane safety glass Width mm Height mm Depth mm Model No. 522 600 38 2793.560 Accessories: – Lock inserts 27 mm, version A, see page 570 – Ergoform-S handle 2452.000, see page 568 522 Protection category IP to IEC 60 529: – IP 54 37.5 Viewing window 408 Supply includes: – Assembly parts 525 475 285 543 600 25.5 Monitor frame for door width 600 and 800 mm For covering a door cut-out, for all standard monitors up to 482.6 mm (19˝). Protection category IP to IEC 60 529: – IP 54 31 38 25 Width mm Height mm External dimensions 470 430 Viewing area 375 325 Cut-out required 415 375 Dimensions Model No. 2305.000 Supply includes: – Security glass panel Identification strips For individual field identifiers on the door, including transparent cover and assembly parts. For enclosure width mm Model No. 600 2403.000 800 2404.000 For labels: Width: Enclosure width -150 mm Height: 29 mm Thickness: 0.75 mm Colour: – RAL 7033 558 Rittal Catalogue 34/System accessories Doors/locks Viewing panels/operating panels Operating panel For mounting on ◾ AE instead of door ◾ Surfaces For use as door variant for AE Width mm Height mm Depth mm Model No. 1001.600 1002.500 1002.600 1032.500 1035.500 197 297 34 2740.0001) 1004.600 1011.600 1030.500 1031.500 377 297 34 2741.000 1006.500 1006.600 1380.500 377 377 34 2742.000 1008.600 1038.500 1338.500 377 597 34 2743.000 1007.600 1013.600 1050.500 1350.500 497 497 34 2745.000 1009.600 1039.500 1339.500 597 377 34 2744.000 1010.500 1010.600 1060.500 1360.500 597 597 34 2746.000 Frame construction with corner connectors on the inside, 3 mm aluminium plate secured from the inside and sealed against the frame Material: – Aluminium, natural anodised. Protection category to IEC 60 529: – IP 54 Supply includes: – Aluminium frame – Display panel – Hinges – Brackets 1) With AE, only for use on the rear panel Area available for population: (width -70 mm) x (height -70 mm) Dimensions of aluminium plate: (width -54 mm) x (height -54 mm) Accessories: – Cam lock 2749.000, see page 559 Cam lock Packs of Model No. May be retrofitted to the operating area or enclosure panel of operating panels. Standard double-bit lock insert may be exchanged for type C lock inserts and type C plastic handle. 1 pc(s). 2749.000 Accessories: – Lock inserts, type C, see page 570 – Plastic handle, type C, see page 569 Viewing window for operating panel For the protection of display and control components. With a build height of max. 35 mm. For operating panel Model No. 2741.000 2791.000 2742.000 2792.000 Material: – Frame: Aluminium, natural anodised. Glass panel: Smoked acrylic Supply includes: – Lock insert no. 3524 E Rittal Catalogue 34/System accessories 559 Doors/locks Allocation of lock systems Compact enclosures, sheet steel Enclosure series DIN 18 252 Version A Version F Lock and push-button inserts 50 Lock inserts Lock and push-button inserts 48 Semi-cylinder 18 – 21 U 46 EL 3-part 3 – 15 U 36 KS with 3-point lock 34 Lock inserts for handle systems with cam with 3-point lock – – from page CM with cam Application BG with cam EB AE, wall-mounted enclosures AE 52 53 100 100 565 565 570 570 565 Handle systems for enclosures Comfort handle For lock inserts 565 – – – – – – – – ◾ – – – ◾ ◾ For padlock and lock inserts 565 – – – – – – – – ◾ – – – ◾ ◾ With security lock insert E1 565 – – – – – – – – ◾ – – – – – For semi-cylinder 565 – – – – – – – – ◾ ◾ ◾ – – – Prepared for ASSA lock system 565 – – – – – – – – ◾ – – – – – Mini-comfort handle (from AE enclosure height 380 mm, from AE enclosure width 300 mm) For lock inserts 567 – – ◾ – – – – ◾ – – – – ◾ ◾ For semi-cylinder 567 – – ◾ – – – – ◾ – ◾ ◾ – – – Ergoform-S handle Standard 568 – – – ◾ – – – – – ◾ ◾ ◾ – – Special with lock insert, lock E1 568 – – – ◾ – – – – – – – – – – Special, prepared for ASSA lock system 568 – – – ◾ – – – – – – – – – – Standard for KS plastic enclosures 568 – – – – – – ◾ – – ◾ ◾ ◾ – – Folding lever handle For lock inserts 565 – – – – ◾ – – – – ◾ ◾ – ◾ – For padlock and lock inserts 565 – – – – ◾ – – – – ◾ ◾ – ◾ – With security lock insert E1 565 – – – – ◾ – – – – – – – – – 571 – – ◾ – – – – – – – ◾ – – – Version B 569 ◾ ◾ ◾ – – – – – – Version E 569 – – – – – ◾ – – – 569 ◾ ◾ ◾ – – – – – – – Semi-cylinder lock For AE Plastic handles T handles Version B Lock inserts for enclosures Lock inserts Version A 570 ◾ ◾ ◾ ◾ – – – – Version E 570 – – – – – ◾ ◾ – – Version F 570 – – – – ◾ – – ◾ ◾ 571 ◾ ◾ ◾ – – – – – – Lock cylinder inserts Version B 560 Rittal Catalogue 34/System accessories Doors/locks Allocation of lock systems Large enclosures, sheet steel Enclosure series Lock inserts for handle systems Door For keyboard drawer or fold-out tray Lock and push-button inserts DIN 18 252 Version A Version F Lock and push-button inserts Lock inserts 62 118 118 565 565 570 570 565 Application from page Semi-cylinder TS, SE PC case Handle systems for enclosures Comfort handle For lock inserts 565 ◾ ◾ – – – – ◾ ◾ For padlock and lock inserts 565 ◾ ◾ – – – – ◾ ◾ For semi-cylinder 565 ◾ ◾ – ◾ ◾ – – – With security lock insert E1 565 ◾ ◾ – – – – – – Prepared for ASSA lock system 564 ◾ ◾ – – – – – – With code 566 ◾ ◾ 1) – ◾ ◾ – – – Ergoform-S handle Standard 568 – – – ◾ ◾ ◾ – – Special with lock insert, lock E1 568 – – – – – – – – Special, prepared for ASSA lock system 568 – – – – – – – – Lock inserts for enclosures Lock inserts Version A 570 – – ◾ Version F 570 ◾ ◾ – 1) Only suitable for use with rear door TS-IT network/ server enclosures New see page 87 Rittal Catalogue 34/System accessories 561 Doors/locks Allocation of lock systems Console systems and industrial workstation, sheet steel Enclosure series Console door Universal consoler TP IW IW enclosure for tower PC Lock and push-button inserts DIN 18 252 Version A Version F Lock and push-button inserts Lock inserts Console cover from page Semi-cylinder Pedestal Application Lock inserts for handle systems One-piece console TP Desk section and console TopConsole TP 111 111 115 115 116 120 119 565 565 570 570 565 Handle systems for enclosures Comfort handle For lock inserts 565 – – – – – ◾ – – – – ◾ ◾ For padlock and lock inserts 565 – – – – – ◾ – – – – ◾ ◾ For semi-cylinder 565 – – – – – ◾ – ◾ ◾ – – – With security lock insert E1 565 – – – – – ◾ – – – – – – Prepared for ASSA lock system 564 – – – – – ◾ – – – – – – With code 566 – – – – – ◾ – ◾ ◾ – – – Ergoform-S handle Standard 568 – ◾ – ◾ ◾ – – ◾ ◾ ◾ – – Special with lock insert, lock E1 568 – ◾ – ◾ ◾ – – – – – – – Special, prepared for ASSA lock system 568 – ◾ – ◾ ◾ – – – – – – – ◾ – ◾ – – – – T handles Version B 569 Lock inserts for enclosures Lock inserts Version A 570 ◾ ◾ ◾ ◾ ◾ – – Version D 570 – – – – – – ◾ Version F 570 – – – – – ◾ – 571 – – – – – ◾ – Lock cylinder inserts Version B Operating housing with handle strips New see page 129 562 Rittal Catalogue 34/System accessories Doors/locks Allocation of lock systems Enclosures and cases, stainless steel Enclosure series Console cover Console door TS, SE Lock and push-button inserts DIN 18 252 Version A Version F Lock and push-button inserts Lock inserts with 3-point lock Semi-cylinder 179/180 181 186 186 182/185 565 565 570 570 565 Application Page Lock inserts for handle systems One-piece console with cam AE Handle systems for enclosures Comfort handle For lock inserts 565 – – – – ◾ – – – ◾ ◾ For padlock and lock inserts 565 – – – – ◾ – – – ◾ ◾ For semi-cylinder 565 – – – – ◾ ◾ ◾ – – – With security lock insert E1 565 – – – – ◾ – – – – – Prepared for ASSA lock system 564 – – – – ◾ – – – – – Standard 568 – ◾ – ◾ – ◾ ◾ ◾ – – Special with lock insert, lock E1 568 – ◾ – ◾ – – – – – – Special, prepared for ASSA lock system 568 – ◾ – ◾ – – – – – – 569 ◾ 1) – ◾ – – – – – – – 569 ◾ 1) – ◾ – – – – – – – 571 ◾ 2) – – – – – ◾ – – – Ergoform-S handle Plastic handles Version C T handles Version C Semi-cylinder lock For AE Lock inserts for enclosures Lock inserts Version A 570 – ◾ – – – Version C 570 ◾ – ◾ – – Version F 570 – – – – ◾ 571 ◾ – ◾ – – Lock cylinder inserts Version C 1) Not with 1018.600 2) Not with enclosures made from stainless steel 1.4401 (AISI 316L) and use of cam lock 2304.000 Accessories Stainless steel Rittal Catalogue 34/System accessories see page 175 563 Doors/locks Lock systems Comfort handle for TS, TS-IT, SE, PC, IW As the handle does not take up any swing space, due to its folding action, the door surface area may be maximised for installed equipment. Also required: – Handle adaptor, see page 549, for mounting on TS glazed door, PC bottom door, IW designer door Material: – Die-cast zinc Surface finish: – Powder-coated For lock inserts For padlock and lock inserts RAL 7035 8611.020 8611.290 RAL 9005 8611.350 – Matt nickel-plated 8611.330 7 mm square 8 mm square With lock insert, lock E11) For semi-cylinder Prepared for ASSA lock system 8611.045 8611.070 8611.280 – 8611.360 – – – 8611.340 – 8611.100 8611.100 – – – 8611.110 8611.110 – – – 7 mm triangular 8611.120 8611.120 – – – 8 mm triangular 8611.130 8611.130 – – – Screwdriver 8611.140 8611.140 – – – Daimler insert 8611.150 8611.150 – – – 3 mm double-bit 8611.160 8611.160 – – – Fiat 8611.170 8611.170 – – – 6.5 mm triangular (CNOMO) 8611.220 8611.220 – – – 8611.180 8611.180 – 2467.000 – Model No. Lock inserts, type F Lock and push-button inserts Lock insert, lock no. 3524 E2) Push-button insert 8611.190 8611.190 – 2468.000 – Push-button and lock insert2) 8611.2003) 8611.2003) – 2469.0004) – – – – 9785.040 – – – – 9785.0426) – Semi-cylinder to DIN 18 2525) 1) Only for use with VW, Audi, SEAT, SkodaAuto, supplied without key 2) With two keys 3) Lock no. 12321; no other lock is possible 4) Lock no. 2123; no other lock is possible 5) With 3 keys for each lock insert 6) Packs of two, simultaneous locking within the same pack, no simultaneous locking for different packs 564 Rittal Catalogue 34/System accessories Doors/locks Lock systems Lock inserts for installation in comfort handle, mini-comfort handle, Ergoform-S standard, folding lever handle Lock and push-button inserts Installation in Comfort handle6), Mini-comfort handle6) Semi-cylinder Comfort handle7), Mini-comfort handle7), Ergoform-S standard, Folding lever handle for CM Comfort handle, Mini-comfort handle, Ergoform-S standard, Folding lever handle for CM Model No. Security lock insert Lock no. 3524 E1) Push-button insert Push-button and lock insert1) 8611.180 2467.000 – 8611.190 2468.000 – 8611.2002) 2469.0003) – – – 9785.040 – – 9785.0425) to DIN 18 2524) 1) With two keys Lock no. 12321; no other lock is possible Lock no. 2123; no other lock is possible 4) With 3 keys for each lock insert 5) Packs of two, simultaneous locking within the same pack, no simultaneous locking for different packs 6) For lock inserts 7) For semi-cylinders 2) 3) Folding lever handle for CM As the handle does not take up any swing space, due to its folding action, the door surface area may be maximised for installed equipment. for lock inserts Size: – Length: 242 mm (with inserted trim panel) – Width: 50 mm – Depth: 17.5 mm Colour: – Body: Similar to RAL 9005 – Handle: Similar to RAL 9006 for padlock and lock inserts with lock insert, lock E11) Model No. 5001.060 5001.062 5001.061 7 mm square 8611.100 8611.100 – 8 mm square 8611.110 8611.110 – 7 mm triangular 8611.120 8611.120 – 8 mm triangular 8611.130 8611.130 – Screwdriver 8611.140 8611.140 – Daimler insert 8611.150 8611.150 – Lock inserts, type F 3 mm double-bit 8611.160 8611.160 – Fiat 8611.170 8611.170 – 6.5 mm triangular (CNOMO) 8611.220 8611.220 – Lock insert, lock no. 3524 E2) 2467.000 2467.000 – Push-button insert 2468.000 2468.000 – Push-button and lock insert2) 2469.0003) 2469.0003) – 9785.040 9785.040 – 9785.0425) 9785.0425) – Lock and push-button inserts Semi-cylinder to DIN 18 2524) 1) Only for use with VW, Audi, SEAT, SkodaAuto, supplied without key 2) With two keys 3) Lock no. 2123; no other lock is possible 4) With 3 keys for each lock insert 5) Packs of two, simultaneous locking within the same pack, no simultaneous locking for different packs Rittal Catalogue 34/System accessories 565 Doors/locks Lock systems Comfort handle with code for TS, TS-IT, SE Flexible access opportunities with ◾ individual 3-digit code without key or ◾ with master key function by additionally using a semi-cylinder of 40 or 45 mm to DIN 18 252, independently of the code Colour Model No. RAL 7035 7200.800 RAL 9005 7200.801 Accessories: – Lock and push-button inserts, see page 565 – Semi-cylinder, see page 565 Adjacent door latch Packs of Model No. for TS For optimum operation of the adjacent door from the outside if the handle on the inside is difficult to access due to swing frames or 482.6 mm (19˝) installed equipment. Retrospective conversion of the adjacent door is easily achieved using the supplied drilling template. The handle on the inside is no longer required. 1 pc(s). 8611.370 Accessories: – Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 570 Colour: – RAL 7035 Supply includes: – Assembly parts Locking bar latch to CNOMO¹) Packs of Model No. To fit all locking bars in TS doors and glazed doors with standard lock or comfort handle The latch prevents the locking bars from moving when the door is open. For mounting on the bolt of the bar guide. 10 pc(s). 8611.210 1) CNOMO is a French automobile industry standard. For safety reasons, it must not be possible to lock the handle whilst the door is open. Also required: – for CNOMO1) Lock inserts, type F, 6.5 mm triangular insert 8611.220, see page 570 Spring washer Upon dismantling the TS locking rods, the spring washers cannot be reused. Spring washer Packs of Model No. 100 pc(s). 8800.070 Material: – Spring steel Surface finish: – Zinc-plated 566 Rittal Catalogue 34/System accessories Doors/locks Lock systems Mini-comfort handle for AE with cam, EL 3-part Prepared for the installation of lock inserts and for the installation of standard commercially available 40 or 45 mm semi-cylinders, as well as lock and push-button inserts. Material: – Die-cast zinc Colour: – RAL 7035 For lock inserts For semi-cylinder Model No. For enclosure system EL AE EL AE 7705.110 2537.010 7705.120 2537.000 7 mm square 8611.100 8611.100 – – 8 mm square 8611.110 8611.110 – – 7 mm triangular 8611.120 8611.120 – – 8 mm triangular 8611.130 8611.130 – – Screwdriver 8611.140 8611.140 – – Daimler insert 8611.150 8611.150 – – 3 mm double-bit 8611.160 8611.160 – – Fiat 8611.170 8611.170 – – 6.5 mm triangular (CNOMO) 8611.220 8611.220 – – 2467.000 Lock inserts, type F Lock and push-button inserts Lock insert, lock no. 3524 E1) 8611.180 8611.180 2467.000 Push-button insert 8611.190 8611.190 2468.000 2468.000 Push-button and lock insert1) 8611.2002) 8611.2002) 2469.0003) 2469.0003) Semi-cylinder to DIN 18 2524) – – 9785.040 9785.040 – – 9785.0425) 9785.0425) 1) 2) With two keys Lock no. 12321; no other lock is possible Lock no. 2123; no other lock is possible 4) With 3 keys for each lock insert 5) Packs of two, simultaneous locking within the same pack, no simultaneous locking for different packs 3) Rittal Catalogue 34/System accessories 567 Doors/locks Lock systems Ergoform S lock system The unlocked handle folds down forwards, and the lock is opened by swivelling. Material: – Die-cast zinc Surface finish: – Powder-coated Standard Standard for KS plastic enclosures Special with lock insert, lock E11) Specially prepared for ASSA lock system RAL 7035 with brown handle – – 2456.500 – Brown – – – 2453.000 Model No. Matt nickel-plated 2452.000 – – – RAL 7035 2435.000 1490.010 – – RAL 7035 With brown handle and bracket 2455.010 – – – 7 mm square 2460.000 2460.000 – – 8 mm square 2461.000 2461.000 – – 7 mm triangular 2462.000 2462.000 – – 8 mm triangular 2463.000 2463.000 – – Screwdriver 2464.000 2464.000 – – Daimler insert 2465.000 2465.000 – – 3 mm double-bit 2466.000 2466.000 – – Fiat 2307.000 2307.000 – – 6.5 mm triangular (CNOMO) 2460.650 2460.650 – – Lock inserts, version A Lock and push-button inserts Lock insert, lock no. 3524 E2) 2467.000 2467.000 – – Push-button insert 2468.000 2468.000 – – Push-button and lock insert2) 2469.0003) 2469.0003) – – 9785.040 9785.040 – – 9785.0425) 9785.0425) – – Semi-cylinder to DIN 18 2524) 1) Only for use with VW, Audi, SEAT, SkodaAuto, supplied without key 2) With two keys 3) Lock no. 2123; no other lock is possible 4) With 3 keys for each lock insert 5) Packs of two, simultaneous locking within the same pack, no simultaneous locking for different packs 568 Rittal Catalogue 34/System accessories Doors/locks Lock systems Plastic handles With or without lock cylinder insert. Supply includes: – Assembly parts and seal Version B C E With lock cylinder insert, lock no. 3524 E1) Without lock cylinder insert With lock cylinder insert, lock no. 3524 E1) RAL 9011 2576.000 2533.000 2485.000 2485.100 RAL 8019 – – – – With lock cylinder insert, lock no. 3524 E1) Without lock cylinder insert G Without lock cylinder insert With lock cylinder insert, lock no. 3524 E1) – – 2599.000 1484.000 1484.001 – Model No. 1) With two keys T-handles With or without lock cylinder insert. Supply includes: – Seal Version B C With lock cylinder insert1) Without lock cylinder insert 2575.0002) 2572.000 With lock cylinder insert1) Without lock cylinder insert Model No. 2535.0002) 2536.000 1) With two keys 2) Lock no. 3524 E Rittal Catalogue 34/System accessories 569 Doors/locks Lock systems Cam locks With double-bit insert Material: Enclosure With lock cylinderinsert3) With double-bit insert, Die-cast zinc, nickel-plated With lock cylinderinsert3) With lock insert, lock E11) With double-bit insert RAL 7035 Fibreglass-reinforced polyamide Made entirely from stainless steel 1.4404 (AISI 316L) Model No. 2520.000 2530.000 2420.000 2430.000 2540.500 2304.000 Lock inserts 7 mm square 2523.000 – 2460.000 – – – 8 mm square 2526.000 – 2461.000 – – – 7 mm triangular 2527.000 – 2462.000 – – – 8 mm triangular 2528.000 – 2463.000 – – – – – 2464.000 – – – Daimler insert 2522.000 – 2465.000 – – – 3 mm double-bit 2483.000 – 2466.000 – – – Fiat – – 2307.000 – – – 6.5 mm triangular (CNOMO) – – 2460.650 – – – – – 2571.000 – – – Screwdriver Lock cylinder inserts With lock no. 3524 E2) 1) Only for use with VW, Audi, SEAT, SkodaAuto, supplied without key 2) With two keys 3) Lock no. 3524 E Lock inserts Version A C D E F Material Die-cast zinc Die-cast zinc Die-cast zinc Plastic Die-cast zinc Length 27 mm 41 mm 47 mm 7 mm square 2460.000 2523.000 – – 8611.100 8 mm square 2461.000 2526.000 – 1488.000 8611.110 7 mm triangular 2462.000 2527.000 – – 8611.120 8 mm triangular 2463.000 2528.000 – 1486.000 8611.130 Screwdriver 2464.000 – – – 8611.140 Daimler insert 2465.000 2522.000 – – 8611.150 3 mm double-bit 2466.000 2483.000 2484.000 1492.000 8611.160 Fiat 2307.000 – – – 8611.170 6.5 mm triangular (CNOMO) 2460.650 – – – 8611.220 Model No. 570 Rittal Catalogue 34/System accessories Doors/locks Lock systems Lock cylinder inserts Version Material B C With lock no. 3524 E1) With lock no. 3524 E1) Die-cast zinc Die-cast zinc Model No. 2571.000 1) 2525.000 With two keys Semi-cylinder lock for compact enclosures AE For retro-fitting to all single-door enclosures with cam lock. The cover plate is locked by semi-cylinders with a total length of 40/45 mm (to DIN 18 252). An additional cover protects the cylinder against dirt. The protection category of the enclosure is not impaired. Supplied without semi-cylinder. Version Model No. RAL 7035 2534.100 Nickel-plated (matt) 2534.500 Accessories: – Semi-cylinder, see page 565 Material: – Die-cast zinc 55 28.5 91.5 27.5 90 70 90 49 55 Lock cover Packs of Model No. for padlocks or multiple locks For retrospective mounting on all compact enclosures AE, sheet steel, with cam lock. 1 pc(s). 2493.000 Material: – Die-cast zinc Surface finish: – Nickel-plated Rittal Catalogue 34/System accessories 571 Doors/locks Lock systems Multiple lock Packs of Model No. for 6 cam locks The ideal solution in cases where individual access for several persons is required for maintenance and repair purposes. 2 pc(s). 2493.500 Lock cover Packs of Model No. Prepared for lead seal For use in all enclosure types with Rittal-specific locks, such as AE and EB. 2 pc(s). 2476.000 Material: – Sheet steel Surface finish: – Zinc-plated Material: – Polyamide Colour: – RAL 7035 Security lock Fitted to doors, to protect against contact with live electrical equipment whilst the master switch is ON. Function: ◾ Locks the door when the master switch is ON ◾ Mains power (voltage) is only enabled whilst the door is closed ◾ Monitoring of the lock magnet via an additional closing contact Supply includes: – Lock – Actuator – Angle bracket – Assembly parts 572 Connection voltage for lock magnet Model No. 230 V AC 11 VA 2416.000 24 V DC 8 W 2418.000 120 V AC 8 VA 2419.000 Also required: – For twin-door enclosures (for the overlapping door, to indicate “enclosure door closed”): Door-operated switch 4127.010, see page 639 Rittal Catalogue 34/System accessories Doors/locks Lock systems Enclosure keys For lock inserts (one double-bit key is supplied with every enclosure). Model No. – – 2549.000 2549.5002)3) 2531.000 – ◾ ◾ – 2532.0001) – – 7 mm triangular 2545.000 – – ◾ 8 mm triangular 2546.000 – ◾ ◾ 7 mm square 2547.000 – – ◾ 8 mm square 2548.000 – ◾ ◾ For HD locks 2549.600 – – – For Daimler 2521.000 – – – For Fiat 2308.000 – – – Double-bit key no. 5 Security key no. 3524 E 1) 2) Packs of 2 With bit adaptor and reversible bit for: Multi-tooth size 25 and Phillips-head (Ph 2) 3) Bit 2549.510 for HD lock insert, see page 172 Rittal Catalogue 34/System accessories 573 Doors/locks Hinges 130°/180° hinges Also required: Supply includes: – Assembly parts Enclosure type – Door variant Material 1) Lock components for frame 8800.040, see page 550 Packs of Colour 130° 180° Model No. TS 8, SE Sheet steel door Die-cast zinc 8800.0201) – – 8800.190 – 8800.950 – 8701.180 4 pc(s). – 8800.710 4 pc(s). – 2 pc(s). – 2449.000 RAL 9011/9006 3 pc(s). – 5001.000 – 4 pc(s). RAL 7035 TS 8, SE Sheet steel door Die-cast zinc RAL 9005 4 pc(s). Matt nickel-plated TS 8, SE Doors with high dynamic loads, Precision casting/ door installations die-cast zinc up to 900 N RAL 7035 TS 8 bayed enclosure suites with comfort handle Sheet steel door Die-cast zinc RAL 7035 Glazed door Die-cast zinc RAL 7035 AE Standard door Die-cast zinc CM Standard door Die-cast zinc 2) – 7824.520 7824.5252) max. 140° Hinge pin removal tool For safe and easy removal of hinge pins. Cover hinge for KL The cover hinge is simply screwed to the enclosure protection channel and to the edge fold. For enclosure Model No. AE/CM 2432.000 Material Packs of Model No. Die-cast zinc 6 pc(s). 1592.000 Stainless steel 1.4404 (AISI 316L) 2 pc(s). 1592.010 Supply includes: – Assembly parts Cover retainer for KL The cover retainer is easily fitted without drilling, and allows the covers to be opened, even when the terminal box below is bayed. 574 Packs of Model No. 3 pairs 1591.000 Rittal Catalogue 34/System accessories Doors/locks Door, internal Support strips For attachment of ◾ Cable ducts ◾ Cable conduit holders ◾ Contact hazard protection covers ◾ Equipment installed on the door ◾ Cable clamping and attachment Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts 4.5 mm diameter hole on a 25 mm DIN pitch pattern Accessories: – Screws and self-tapping screws M5, see page 625 For TS, SE, CM, TP For AE For door width mm Length mm Packs of Model No. 400 290 20 pc(s). 4594.000 500 390 20 pc(s). 4309.000 600 490 20 pc(s). 4596.000 800 690 20 pc(s). 4598.000 900 790 20 pc(s). 4579.000 1000 890 20 pc(s). 4599.000 For enclosures AE Packs of Model No. 1018.6002), 1050.5001), 1100.500, 1114.5001), 1213.5001), 1019.5002) 1057.500 1110.500 1130.500 1350.5001) 20 pc(s). 2325.000 1009.6002), 1012.5002), 1054.500, 1060.500, 1090.500, 1339.500, 1376.500 1039.500 1058.500 1076.500 1260.5001) 1360.500 20 pc(s). 2326.000 20 pc(s). 2327.000 20 pc(s). 2328.000 1014.5002), 1073.500 1077.500 1016.5002), 1017.5002) 1055.500, 1180.500 1280.5001) 1)For Spacers The universal assembly component for all situations where a distance from the mounting level is required. With self-tapping thread for diameter 4.5 mm. The following components may be attached to the rear using 5.5 x 13 mm screws: ◾ Top-hat/cross rails ◾ Contact hazard protection covers ◾ Master switch trim panels ◾ Cable clamp rails etc. Material: – Hexagonal steel (SW8) these AE models, the door rails should be cut to length at the knockout. Only in conjunction with perforated mounting strips (see page 576) Length mm Packs of Model No. 25 12 pc(s). 2311.225 50 12 pc(s). 2311.250 25 2) Surface finish: – Zinc-plated Accessories: 50 – Screws 5.5 x 13 mm, see page 625 Rittal Catalogue 34/System accessories 575 Doors/locks Door, internal Perforated mounting strip for AE stainless steel For vertical mounting on the threaded bolts of the door, for attaching ◾ Support strips for AE, see page 575 ◾ Door stay 2519.000, see page 578 Length mm Model No. 1012.600, 1014.600 698 2310.076 1016.600, 1018.600 938 2310.100 1017.600, 1019.500, 1019.600 1138 2310.120 To match AE 3.7 mm diameter hole on a 25 mm DIN pitch pattern Material: – Sheet steel Accessories: – Screws, see page 625 Surface finish: – Zinc-plated Supply includes: – Packs of 20 (nuts and serrated washers included) Utility lectern For programming units etc. Prepared for mounting on the tubular door frame of TS, SE, CM, PC or on any sufficiently large surface. When required for servicing, it folds down quickly with a maximum support area, and after use is stowed between the tubular door frames in a space-saving design. Support area Width mm Depth mm For door width mm Model No. 413 400 600 4638.600 613 400 800 4638.800 Load capacity: – max. 30 kg. Material: – Sheet steel Colour: – RAL 7035 Wiring plan lectern Holds wiring plans during fault finding and maintenance work. The wiring plan lecterns can be bayed according to the door width. For mounting on the tubular door frame. For enclosures Packs of Model No. TS, SE, CM, TP, PC 1 pc(s). 4120.000 For door width mm Required/possible number of wiring plan lecterns min. Max. 400 1 1 500 1 1 Colour: – Similar to RAL 7035 600 2 2 800 2 3 Supply includes: – Wiring plan lectern (width 210 mm) – Assembly parts 1000 3 3 CD/DVD box Packs of Model No. For fixing to all flat, clean surfaces with double-sided adhesive tape. 1 pc(s). 2446.000 Material: – Utility lectern: Polypropylene – Mounting bracket: Die-cast zinc Capacity: – Max. 10 CDs/DVDs Material: – Polyamide Colour: – RAL 7033 576 Rittal Catalogue 34/System accessories Doors/locks Door, internal Plastic wiring plan pockets for AE For installation options, refer to table ◾ B = Screw-fastened to the perforated door strip on both sides ◾ E = Screw-fastened on one side, other side stuck with adhesive or stuck entirely with adhesive Model No. Supply includes: – 2 holders with double-sided adhesive tape – Acrylic glazed pane – Assembly parts Note: – The acrylic glazed pane may be shortened to any required size for shorter doors 2514.500 2514.600 2514.800 Usable width mm 340 415 615 Usable depth mm 18 18 18 Height of acrylic glazed pane mm 167 167 167 – Installation options 1) For Model No. AE Width mm 1050.500 500 B – 1054.500 600 E E – 1055.500 800 E E E 1057.500 500 B – – 1058.500 600 E E – 1060.500 600 E E – 1073.500 760 E E – 1076.500 600 E E – 1077.500 760 E E – 1090.500 600 E E – 1100.500 1000 B – – 1110.500 1000 B – – 1114.500 1000 B1) – – 1130.500 1000 B – – E 1180.500 800 E E 1213.500 1000 B1) – – 1260.500 600 E B – 1280.500 800 E E B 1350.500 500 B – – 1360.500 600 E E – 1376.500 600 E E – Prepared for mounting on the l/h side door; for installation in the r/h side door, the acrylic glazed pane may be shortened Plastic wiring plan pockets For affixing to the inside surfaces of doors. For format Clearance openings mm W H Model No. D Material: – Polystyrene with self-adhesive fastening strips A3 landscape 438 286 45 2513.000 A4 portrait 228 254 17 2514.000 Colour: – Similar to RAL 7035 A5 landscape 228 174 17 2515.000 Wiring plan pockets with transparent pouch With welded-on transparent pouch and self-adhesive backing. Rittal Catalogue 34/System accessories For format Model No. DIN A4 2510.000 DIN A3 2512.000 577 Doors/locks Door, internal Sheet steel wiring plan pockets D = 90 mm for TS, SE, CM, TP pedestal, PC For fastening to tubular door frames at any height. Clearance openings mm To fit door width mm W H Model No. Colour: – RAL 7035 400 255 210 4114.000 Supply includes: – Assembly screws 500 355 210 4115.000 600 455 210 4116.000 800 655 210 4118.000 900 755 210 4123.000 1000 855 210 4124.000 D = 35 mm Clearance openings mm To fit door width mm Door stay To secure the door in the open position. Supply includes: – Assembly parts Model No. W H 500 355 210 4115.500 600 455 210 4116.500 800 655 210 4118.500 For Mounting TS, SE, TP universal console, PC Packs Model No. of Bottom 5 pc(s). 4583.000 CM, TP Top 2 pc(s). 2519.200 AE (except 1032.500 and 1035.500) and all AE stainless steel enclosures1) Top 5 pc(s). 2519.000 1) With AE stainless steel, only in conjunction with perforated mounting strips, see page 576 Door stay for escape routes Packs of Model No. for TS, SE, PC In case of an emergency, conventional door stays can block the escape route. This stay is actuated automatically in the event of pressure, releasing the door in both directions. In conjunction with 180° hinges, this ensures that no escape routes are blocked by open doors in the event of an emergency. 1 pc(s). 4583.500 Accessories: – 180° hinge, see page 574 180° hinge Supply includes: – Assembly parts 90° 578 130° Rittal Catalogue 34/System accessories Doors/locks Door, internal Ride-up roller Packs of Model No. for TS, SE, PC Lifts the door with heavy installed equipment (e.g. cooling unit) as a closing aid. For attaching to the tubular door frame. 10 pc(s). 4538.000 Transport and mounting handle Packs of Model No. for doors TS, SE For safe installation and removal of the door and during relocation in the workshop. The matching hinge pin removal tool for 130° hinges is preintegrated, and supplied loose for 180° hinges. 1 pc(s). 2415.100 Document clip, magnetic Packs of Model No. For simple attachment of installation documentation as a reminder or for flexible accommodation of a wide range of documents, measurement records, test reports etc. May be attached to any magnetcompatible surface via a permanent magnet. 2 pc(s). 7950.200 Alternate frame, magnetic Packs of Model No. For individual marking or labelling of the existing network infrastructure. The magnetic surface facilitates flexible mounting on all magnet compatible surfaces. Adhesive strips are supplied for non-magnetic surfaces. The maximum size of the labels is 130 x 50 mm. 10 pc(s). 7950.150 Material: – Plastic: Transparent – Handle pieces: Black Rittal Catalogue 34/System accessories 579 Roof/wall mounting Roof Rain canopies for AE, CM Reliable protection for outdoor siting – with water run-off to the rear. Easily retro-fitted. Supply includes: – Assembly parts Accessories: – Condensate discharge, see page 533 – Pressure relief stopper, see page 533 – Wall mounting brackets 2503.010 and 2508.010, see page 587 Note: – For outdoor siting, we generally recommend a rain canopy above the enclosure or the gap between the door and the enclosure, in order to protect against water and UV radiation – Testing of IP protection categories for water protection (2nd code number to IEC 60 529) cannot be compared with an enclosure sited outdoors or under similar conditions – Depending on the ambient conditions, additional measures may be required (see “Technical Information”) For AE, sheet steel version For Material: – Sheet steel Surface finish: – Powder-coated, textured paint Colour: – RAL 7035 Enclosure width mm Enclosure depth mm Model No. 380 210 2501.500 600 210 2502.500 600 350 2511.500 Enclosure width mm Enclosure depth mm Model No. 200 155 2470.000 300 210 2361.000 380 155 2471.000 380 210 2472.000 500 210 2362.000 600 210 2473.000 760 300 2474.000 800 300 2475.000 1000 300 2363.000 Width mm Depth mm Model No. For AE, stainless steel version For Material: – Stainless steel 1.4301 (AISI 304) Surface finish: – Brushed, grain 240 38 1.25 23 B1 23 T2 25 15.5 50 T1 B1 = Enclosure width + 11 mm T1 = Enclosure depth + 25 mm T2 = Enclosure depth – 90 mm, from enclosure width 600 mm: Enclosure depth – 115 mm 25 6.5 Enclosure depth 600 400 5001.310 800 400 5001.330 1000 400 5001.350 1200 400 5001.360 6.5 12.5 13 32.5 For CM, sheet steel version Material: – Sheet steel Surface finish: – Powder-coated, textured paint Colour: – RAL 7035 6.5 Enclosure width 580 Rittal Catalogue 34/System accessories Roof/wall mounting Roof Dust guard trim for AE, CM, EB, KL and BG To protect against deposits on the upper edge of the door and between the enclosure and the door/ cover. Cut the dust guard trim to length according to the enclosure width. Drill the enclosure and fit the dust guard trim using the adhesive strips and screws. For enclosure Length mm A mm 1200 20 AE Model No. 25 CM KL, EB, BG 2426.500 20.5 60 A 6 Material: – Plastic, resistant to UV Colour: – Similar to RAL 7024 Ø5 Dust guard trim for TS, SE To protect against dust deposits on the upper edge of the door and between the door and upper horizontal enclosure section. The dust guard trim provides space for texts or company logos. Colour: – RAL 7035 Supply includes: – Clear plastic strip for text labels (height 29.5 mm) Rittal Catalogue 34/System accessories Length mm Model No. 600 2424.100 800 2425.100 1000 2427.100 1200 2426.100 Note: – Also suitable for use in conjunction with top baying cover, see page 548 581 Roof/wall mounting Roof Top-mounting module For enclosures for TS As a cable chamber for cable infeed from above or for power distribution with busbar systems across bayed enclosures. The TS cover plate supplied as standard is used to finish off at the top. The enclosure height is increased by 200 mm with the top module fitted. The top baying cover cannot be fitted. Installation accessories for top and bottom, see diagram and explanations below. Width (B) mm Depth mm Model No. 600 600 8801.735 800 600 8801.745 1000 600 8801.755 1200 600 8801.765 Supply includes: – 1 frame module – 2 trim panels (front and rear) – 8 holders with automatic potential equalisation – 4 tapped rods with eyebolts Material: – Sheet steel, 1.5 mm Surface finish: – Spray-finished, textured paint Colour: – RAL 7035 Also required: Protection category IP to IEC 60 529: – IP 55 B- 6 NEMA protection category: – NEMA 12 3 150 200 60 – Side panel for top-mounting module, 8801.775, see page 582 B- 88 2 51 Accessories: Description Page TS punched rail 18 x 38 mm PS punched rail 23 x 23 mm 609 with angle bracket PS punched rail 23 x 23 mm with support bracket PS PS punched section without 11 1 2 3 mounting flange 23 x 73 mm with support bracket PS 5 4 PS punched section with mounting flange 23 x 73 mm 10 7 8 611 612 613 System support rails 613 C-rail 30/15 with support bracket or spacer 612 Cable clamp rail 665 mounting flange 45 x 88 mm 6 610 Support rail TS punched rail 25 x 38 mm TS punched section without 1 610 608 608 9 Side panel Packs of Model No. for top-mounting module To finish off the side of a top-mounting module or bayed suite. 2 pc(s). 8801.775 Material: – Sheet steel, 1.5 mm Surface finish: – Spray-finished, textured paint Colour: – RAL 7035 Supply includes: – Assembly parts 582 Rittal Catalogue 34/System accessories Roof/wall mounting Roof Roof plates for TS For enclosures without roof plate and in exchange for the standard roof in other TS enclosures. Material: – Sheet steel, 1.5 mm Surface finish: – Textured paint Colour: – RAL 7035 Supply includes: – Assembly parts For cable entry glands IP 55, solid For enclosures For enclosures Width mm Depth mm Packs of Model No. Width mm Depth mm Required number of glands Packs of Model No. 400 600 1 pc(s). 9671.646 600 400 2 pc(s). 1 pc(s). 9665.943 600 600 1 pc(s). 9671.666 850 400 3 pc(s). 1 pc(s). 9665.953 800 600 1 pc(s). 9671.686 1100 400 4 pc(s). 1 pc(s). 9665.963 400 800 1 pc(s). 9671.648 400 600 3 pc(s). 1 pc(s). 9671.546 600 800 1 pc(s). 9671.668 600 600 4 pc(s). 1 pc(s). 9665.903 800 800 1 pc(s). 9671.688 800 600 8 pc(s). 1 pc(s). 9671.586 850 600 6 pc(s). 1 pc(s). 9665.913 1100 600 8 pc(s). 1 pc(s). 9665.923 400 800 4 pc(s). 1 pc(s). 9671.548 600 800 8 pc(s). 1 pc(s). 9671.568 800 800 8 pc(s). 1 pc(s). 9671.588 IP 4X In order to achieve a protection category of IP 41, a roof plate IP 55 should be fitted above the existing roof plate using four spacers 7967.000. For enclosures Width mm Depth mm Packs of Model No. 400 600 1 pc(s). 9671.364 600 600 1 pc(s). 9671.366 800 600 1 pc(s). 9671.368 400 800 1 pc(s). 9671.384 600 800 1 pc(s). 9671.386 800 800 1 pc(s). 9671.388 Also required: Cable entry gland, see page 584 IP 2X with ventilation hole, build height: 72 mm For enclosures Width mm Depth mm Packs of Model No. 400 600 1 pc(s). 9671.846 600 600 1 pc(s). 9660.235 800 600 1 pc(s). 9660.245 1000 600 1 pc(s). 9660.255 1200 600 1 pc(s). 9660.265 400 800 1 pc(s). 9671.848 600 800 1 pc(s). 9659.525 800 800 1 pc(s). 9659.535 1000 800 1 pc(s). 9659.545 1200 800 1 pc(s). 9659.555 Rittal Catalogue 34/System accessories 583 Roof/wall mounting Roof Cable entry gland ◾ Including seal ◾ External dimensions 250 x 160 mm ◾ Protection category IP 55 Version 1 Material Colour Packs of Model No. 14 x M25/32 Insulating material RAL 7035 1 pc(s). 9665.750 2 x M25/32/40, 1 x M32/40/50, 2 x M40/50/63 Insulating material RAL 7035 1 pc(s). 9665.760 With sealing membranes 32 x Ø 7 – 16 mm, 4 x Ø 10 – 20 mm, 3 x Ø 14 – 26 mm Insulating material RAL 7035 1 pc(s). 9665.770 With entry glands up to Ø 66 mm Insulating material RAL 7035 1 pc(s). 9665.780 Solid Sheet steel, RAL 7035 spray-finished 4 pc(s). 9665.785 2 4. 223 135 5 138 Ø 3 R2 5 226 Cut-out dimensions for 9665.750 to 9665.785 4 5 584 Rittal Catalogue 34/System accessories Roof/wall mounting Roof Roof plate for cable entry, two-piece for TS, TS-IT In exchange for the standard roof. Equipped with a sliding angular bracket in the rear section. Rubber cable clamp strip on both sides for attaching cable bundles and bunched cables. Thanks to the symmetrical design of the TS frame, side cable entry can also be achieved by rotating the roof plate. The two-piece design allows convenient retrofitting. For enclosures Width mm Depth mm Model No. 600 600 7826.665 600 800 7826.685 600 1000 7826.605 800 600 7826.865 800 800 7826.885 800 1000 7826.805 800 1200 7826.825 Width mm Depth mm Model No. 600 600 7826.669 600 800 7826.689 800 600 7826.869 800 800 7826.889 800 1000 7826.809 Material: – Sheet steel Colour: – RAL 7035 Roof plate, vented for TS, TS-IT In exchange for the standard roof. 72 mm high roof plate, all-round vent slots and clamp strip for cable entry. The two-piece design allows convenient retrofitting. Material: – Sheet steel For enclosures Colour: – RAL 7035 Roof mounting screw Packs of Model No. For screw-fastening the roof plate instead of eyebolts. With contact washers for potential equalisation. 20 pc(s). 4198.000 Thread: M12 Material: – Steel Surface finish: – Zinc-plated Supply includes: – 20 panhead Allen screws M 12 x 20 – 20 serrated sealing washers A 12.5 Rittal Catalogue 34/System accessories 585 Roof/wall mounting Roof Spacers for roof plate TS To raise the TS roof for ventilation purposes, in three different heights. Not suitable for crane transportation! Height mm Packs of Model No. 10 4 pc(s). 2422.000 20 4 pc(s). 2423.000 50 4 pc(s). 7967.000 Thread: M12 Material: – Hexagonal sectional steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Eyebolts for TS, SE For crane transportation of enclosures, where not already included in the supply. Material Packs of Model No. Sheet steel, zinc-plated CI 5 4 pc(s). 4568.000 Stainless steel 1.4301 (AISI 304) 4 pc(s). 4568.500 Thread: M12 Supply includes: – 4 eyebolts M12 – 4 serrated lock washers A 12.5 Eyebolts Packs of Model No. for CM For crane transportation of enclosures, with reinforcement plate to be inserted underneath. Mounting via the two holes in the top of the CM. 2 pc(s). 2509.500 Eyebolts Packs of Model No. for AE For crane transportation of enclosures, with reinforcement plate to be inserted underneath. 4 pc(s). 2509.000 Thread: M12 Supply includes: – Eyebolts – Reinforcement plates Thread: M12 Supply includes: – Eyebolts – Reinforcement plates 586 Rittal Catalogue 34/System accessories Roof/wall mounting Wall mounting Wall mounting bracket Material Wall distance mm Packs of Model No. Brass nickel-plated 8 4 pc(s). 1580.000 Supply includes: – Assembly parts for mounting on the enclosure. Sheet steel zinc-plated 8 4 pc(s). 1590.000 Note: – For hygiene reasons, and in view of the protection category, the stainless steel enclosures do not have any drilled holes for the wall mounting brackets. Stainless steel 1.4301 (AISI 304) 8 4 pc(s). 1594.000 For the attachment of KL, EB, BG and IT enclosures based on EL. 20 25 Ø Ø 8.2 20 10 10 8 9 20 Wall mounting bracket for AE For attaching to the enclosure from the outside. Simply insert the expandable dowel into the enclosure hole from the outside, and screw-fasten the wall bracket from the outside. Wall distance mm Packs of Model No. 15 4 pc(s). 2508.100 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Wall bracket pre-fitted with seal and expandable dowel Wall mounting bracket Wall distance (A) mm Packs of Model No. 40 4 pc(s). 2503.010 10 4 pc(s). 2508.010 Stainless steel 1.4301 (AISI 304) 10 4 pc(s). 2433.000 Stainless steel 1.4404 (AISI 316L) 10 4 pc(s). 2433.500 Material For mounting KL, EB, BG, AE, CM, IT enclosures based on EL and AE, TP consoles and small fibreoptic distributors. 29 Possible alternative: A 15 20 – Hygienic Design wall spacer bracket, see page 172 54 15 Note: – Item 2503.010 is only suitable up to a depth of 600 mm Ø Ø 10.2 Supply includes: – Assembly parts for mounting on the enclosure Sheet steel, zinc-plated 9 20 Rittal Catalogue 34/System accessories 587 Roof/wall mounting Wall mounting Wall mounting bracket for KS For attachment to the wall, only possible from the outside of the enclosure. 1) Colour Packs of Similar to RAL 7035 4 pc(s). Model No. 1483.010 Similar to RAL 9011 4 pc(s). 9266.0001) With graphite additive for Ex applications Material: – Fibreglass-reinforced polyamide1) 30 50 35 Ø 8.5 Supply includes: – Assembly parts for mounting on the enclosure. 11.5 For compact enclosures (additional holes required in the enclosure). Colour Packs of RAL 7035 4 pc(s). 2505.510 Stainless steel 1.4301 (AISI 304) – 4 pc(s). 2583.010 20 Supply includes: – Assembly parts for mounting on the enclosure Material Sheet steel Model No. 35 Wall angle 13 R4 34 6.5 26 2 90 70 Wall bracket Packs of Model No. For roof-side wall attachment of TS and SE with a low depth and e.g. heavy components on the door or built-in swing frame. 4 pc(s). 4595.000 Material: – Sheet steel Surface finish: – Zinc-plated 588 Possible alternative: – With TS 8 inside the enclosure (without mounting plate), baying bracket 800.470, see page 546 Rittal Catalogue 34/System accessories Roof/wall mounting Wall mounting Pole clamp for KL, EB, BG, AE, KS For reliable, convenient fastening to round or square poles. Packs of Model No. 1 set(s) 2584.000 Packs of Model No. 1 set(s) 6016.200 For pole diameter/size: – Ø from 40 to 190 mm – □ from 50 to 150 mm Material: – Mounting angles, clamping section: Sheet steel – Clamping strap: Stainless steel 1.4301 (AISI 304) Surface finish: – Mounting angle, clamping section: Zinc-plated Supply includes: – 2 mounting angles, 600 mm long – 4 clamping sections – 2 clamping straps – 4 clamping brackets – 4 screws and captive nuts M8 for mounting on the enclosure Enclosure connectors Adjustable Between Command Panels, terminal boxes, compact enclosures and horizontal or vertical surfaces. Pre-mount the connector halves on both sides, screw together and secure with a locking screw, and/or adjust the angle of rotation. Note: – The locking screws may be exchanged for standard, commercially available clamping levers (M10 x 50 mm) Rotation range: – ±105° adjustable in 7.5° stepped increments Supply includes: – Assembly parts for both sides. Rittal Catalogue 34/System accessories 10 54 54 Colour: – RAL 7035 5° Surface finish: – Powder-coated 10 5° Material: – Die-cast zinc 589 Roof/wall mounting Wall mounting Frame connector, adjustable for Comfort Panel Between the command panel and keyboard housing and horizontal or vertical surfaces. Packs of Model No. 1 set(s) 6005.500 Rotation range: – Adjustable in 8° stepped increments, see drawing –14°/+178° Material: – Die-cast zinc 12 0° Wall mounting bracket Vertically hinged Between the Compact Panel and horizontal or vertical surfaces. 64 Supply includes: – Assembly parts and clamping levers for both sides 32° Colour: – RAL 7024 47.5 Surface finish: – Powder-coated 104° Packs of Model No. 1 set(s) 6341.000 Rotation range: – 180° adjustable on a 7.2° pitch pattern Material: – Wall mounting bracket: Sheet steel – Knurled screw: Steel with plastic knurled handle Supply includes: – Knurled screw and assembly parts for mounting on the Compact Panel 590 Rittal Catalogue 34/System accessories Interior installation Mounting plates Mounting plates for KL and KL-HD For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure. Accessories: – Self-tapping screws 2487.000, see page 625 Possible alternative: Material: – Sheet steel, 2 mm – Support rails, see page 614 Surface finish: – Zinc-plated Technical details: Available on the Internet For size mm For Model No. KL and KL-HD Model No. 150 x 150 1500.510, 1514.510, 1521.010, 1527.010, 1670.600, 1671.600 1560.700 200 x 150 1528.510, 1529.510 1575.700 300 x 150 1501.510, 1515.510, 1522.010, 1530.510 1561.700 400 x 150 1589.510 1576.700 200 x 200 1502.510, 1516.510, 1523.010, 1528.010, 1672.600 1562.700 300 x 200 1503.510, 1517.510, 1524.010, 1529.010, 1531.510, 1674.600 1563.700 400 x 200 1504.510, 1518.510, 1525.010, 1532.510, 1675.600 1564.700 500 x 200 1505.510, 1533.510 1565.700 600 x 200 1506.510, 1519.510, 1534.510 1566.700 800 x 200 1527.510, 1542.510 1574.700 300 x 300 1507.510, 1526.010, 1535.510 1567.700 400 x 300 1508.510, 1530.010, 1536.510, 1676.600 1568.700 500 x 300 1509.510, 1537.510 1569.700 600 x 300 1510.510, 1538.510 1570.700 400 x 400 1511.510, 1539.510 1571.700 600 x 400 1512.510, 1540.510 1572.700 800 x 400 1513.510, 1541.510 1573.700 Mounting plate For enclosure height mm Model No. 1800 8614.180 2000 8614.200 for TS, 400 mm wide Depth-adjustable on a 25 mm pitch pattern. Material: – Sheet steel, 3 mm Supply includes: – Assembly parts 23 24.5 23 48 299 23 73 Surface finish: – Zinc-plated 42 Accessories: – TS 18 x 38 mm punched rail, used as mounting plate slide rail, see page 609 – TS width divider, for installation in wider enclosures, see page 523 Mounting plate infill for TS For a continuous mounting surface in bayed suites where the mounting plate is set forward. Material: – Sheet steel, 2 mm 1696/1896 17 For enclosure height mm Model No. 1800 4590.700 2000 4591.700 2200 4592.700 Surface finish: – Zinc-plated Supply includes: – Assembly parts Rittal Catalogue 34/System accessories 591 Interior installation Mounting plates Mounting plate attachment For additional clamping and to reduce potential vibration of the mounting plate. Select according to mounting position, installation type and enclosure. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts For TS, SE Installation options: ◾ Side, at half height in conjunction with mounting plate infill ◾ In the penultimate position ◾ Set forward (supplied state) Benefit: No impairment to the mounting surface, but mounting is only possible from the enclosure rear For TS, SE Installation options: ◾ Side ◾ Rear, flush with enclosure frame Packs of Model No. 10 pc(s). 8800.630 Accessories: – Mounting plate infill, see page 591 Packs of Model No. 10 pc(s). 8800.610 Packs of Model No. 10 pc(s). 8800.090 Benefit: No impairment to the mounting surface, but mounting is only possible from the enclosure rear For TS, SE Installation options: ◾ Side ◾ Rear, flush with enclosure frame ◾ Set forward on a 25 mm pitch pattern Benefit: No impairment to the mounting surface, for optional use as attachment or screw-fastening Also required: – Punched section with mounting flange 17 x 73 mm for the inner mounting level, see page 606 (for Fig. 3) Mounting plate attached in the rearmost installation position Mounting plate screw-fastened from the rear in the rearmost installation position Mounting plate in a set forward position, either attached or screw-fastened (not shown) 1 2 3 For TS, SE Installation options: ◾ Side ◾ Rear, flush with enclosure frame Packs of Model No. 10 pc(s). 8800.050 Slide over the plate at the side and secure with screws. Additionally, the mounting plate may be drilled and screw-fastened at the rear C-edge. 592 Rittal Catalogue 34/System accessories Interior installation Mounting plates Mounting plate attachment For additional clamping and to reduce potential vibration of the mounting plate. Select according to mounting position, installation type and enclosure. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts For TS, SE Installation options: ◾ All-round ◾ Set forward on a 25 mm pitch pattern Slide in between the bar and plate from below or above or from the side, and secure with screws. Packs of Model No. 10 pc(s). 4593.000 Also required: – Support strip (with TS for inner level), see page 609 or – Punched section with mounting flange (with TS for inner level), see page 606 or – Punched rails and punched sections, see page 610/611 For TS, SE Installation options: ◾ On the top and bottom of the mounting plate ◾ Rear, flush with enclosure frame Packs of Model No. 10 pc(s). 4576.000 Packs of Model No. 1 set(s) 8800.280 Screw in the clip behind the plate and secure with screws. Installation kit for mounting plates TS, SE, back-to-back The minimal distance between the two mounting plates ensures a maximum installation depth for installed equipment on both sides. Material: – Sheet steel Surface finish: – Zinc-plated Note: Build height front and rear, with central installation = (enclosure depth -48 mm) : 2 Example: 8806.521 = Depth 600 mm Build depth = 2 x 276 mm Rittal Catalogue 34/System accessories 593 Interior installation Mounting plates Slide rails for mounting plate TS Slides in from the side. ◾ Attachment of the mounting plate to the slide rails via captive nuts and screws. ◾ Mounting of the slide rails directly on the enclosure frame, depth-adjustable on a 25 mm pitch pattern For enclosure width mm Packs of Model No. 600 2 pc(s). 8802.260 800 2 pc(s). 8802.280 1200 2 pc(s). 8802.220 Technical specifications: – Possible mounting depth T6 -25 mm, refer to the Internet Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Mounting plate adjustment bracket for KS Infinitely adjustable. Other equipment can also be installed on a rail system in this way, instead of the mounting plate. Material: – Sheet steel For enclosures KS Packs of Model No. 1423.500, 1432.500, 1434.500, 1444.500, 1446.500, 1448.500, 1449.500, 1466.500, 1467.500 4 pc(s). 1481.000 1400.500, 1453.500, 1454.500, 1468.500, 1469.500, 1479.500, 1480.500 4 pc(s). 1491.000 Surface finish: – Zinc-plated Supply includes: – Assembly parts W Enclosure width: – 76 mm (1481.000) – 104 mm (1491.000) H Enclosure height: – 150 mm 594 H M8 x 15 B Rittal Catalogue 34/System accessories Interior installation Mounting plates Mounting plate attachment for CM, TP one-piece console, TP pedestal for high dynamic loads For example, if a direct connection between the mounting plate and the enclosure is required for mobile use (cranes etc.). Tested as per DIN EN 60 721 severity 3 M4, with a weight of 150 kg evenly distributed over the mounting plate. Simply screw-fasten to the existing holes in the mounting plate to pre-assemble for: Packs of Model No. 1 set(s) 5001.075 For enclosure width mm Model No. 1200 4333.120 1600 4333.160 1800 4333.180 Packs of Model No. 2 pc(s). 2415.500 Wall mounting from the inside Direct, using a bracket and wall/support mounted enclosure Wall mounting from the outside Screws for wall mounting brackets (see page 587) are easily screwed into the plate nuts from the outside Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Cross-brace for mounting plates for TS, SE Additional horizontal rigidity for vibration resistance and/or stabilisation of wide mounting plates. This brace may also be used as an attachment aid for heavy components. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – 2 sections – 4 clamping sections – 4 grub screws M10 x 16 mm Transport handles for mounting plates for TS, SE May be used at any given position in the side C-fold. Benefits include ◾ Can be used for people of different heights ◾ Optimised force transmission ◾ Easy handling Rittal Catalogue 34/System accessories 595 Interior installation Mounting plates Partial mounting plates Material: – Sheet steel, 2.5 mm for TS, SE For ◾ Universal interior installation, also in conjunction with punched sections with mounting flanges and support strips; defective assemblies are easily and quickly replaced ◾ Additional mounting levels Surface finish: – Zinc-plated Supply includes: – Assembly parts Partial mounting plates are fastened directly onto the vertical enclosure sections via the inner mounting level using the assembly parts supplied loose. In this mounting position (in both the width and the depth) they form one level with TS punched sections with mounting flanges 17 x 73 mm and TS support strips for the inner mounting level. Accessories: – TS punched section with mounting flange 17 x 73 mm for the outer mounting level, see page 606 – TS support strip, see page 609 – Hinge attachment, see page 597 – Self-tapping screws, 2487.000, see page 625 For installation in Enclosure width mm 400 600 ◾ ◾ 800 1000 Enclosure depth (side) mm 1200 400 ◾ 500 x 300 1 pc(s). 8614.640 ◾ ◾ 500 x 400 1 pc(s). 8614.650 ◾ 500 x 500 1 pc(s). 8614.660 500 x 700 1 pc(s). 8614.680 500 x 775 1 pc(s). 8614.6751) ◾ 700 x 300 1 pc(s). 8614.840 ◾ 700 x 400 1 pc(s). 8614.850 ◾ 700 x 700 1 pc(s). 8614.880 900 x 300 1 pc(s). 8614.040 900 x 400 1 pc(s). 8614.050 900 x 500 1 pc(s). 8614.060 1100 x 300 1 pc(s). 8614.240 1100 x 400 1 pc(s). 8614.250 1100 x 500 1 pc(s). 8614.260 ◾ ◾ ◾ ◾ 800 ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ Model No. 600 ◾ ◾ Packs of 500 ◾ ◾ Size mm ◾ ◾ ◾ 1) Also suitable for installing in – PC enclosures based on SE behind the lower front door – IW enclosures, height 900 and 1000 mm 1 2 When installing around corners due to collision between the assembly components At least 75 mm (adjustable on a 25 mm pitch pattern) Set forward installation position Quickly and easily achieved with four TS punched sections with mounting flanges 17 x 73 mm for the outer mounting level, see page 606 Maximum space utilisation 1 mm (adjustable on a 25 mm pitch pattern) Partial installation Partial utilisation of the enclosure depth or width is possible, in this case using a PS punched section without mounting flange 23 x 73 mm, see page 611 596 Continuously flush In bayed enclosures, the partial mounting plate is in the rearmost position flush with the standard mounting plate; this facilitates continuous component mounting Rittal Catalogue 34/System accessories Interior installation Mounting plates Hinge attachment for partial mounting plate TS, SE Packs of Model No. 1 set(s) 8614.100 Material: – Steel Also required: Surface finish: – Zinc-plated Installation kit for swing frame, small, – for enclosure width 600 mm 2377.860, 800 mm 2377.880, see page 678 – PS punched section without mounting flange 23 x 73 mm according to the enclosure depth, see page 611, Support brackets 8800.330, see page 620, depending on the installation position Supply includes: – Assembly parts Examples In the highest or lowest position At the front Set back 1 1 2 1 1 2 In a central position At the front Side installation: In conjunction with hinge, for side panel, see page 535, for an enclosure depth of 600 or 800 mm, side installation is identical to installation parallel to the front. Side installation Set back 1 1 2 2 2 1 2 1 1 1 Partial mounting plates, locatable into rails for TS, SE, TP For installation in ◾ Console and desk unit on the interior installation system rails ◾ Punched sections with mounting flanges or support strips fitted to the side of the pedestal in the depth ◾ Other enclosures mounted on rails with 25 mm pitch pattern punchings Width mm Height mm Packs of Model No. 200 437 1 pc(s). 6730.310 500 437 1 pc(s). 6730.330 700 437 1 pc(s). 6730.340 For console/desk unit Width mm Max. partial mounting plates that may be installed 600 1 x 6730.330 800 1 x 6730.340 For easy mounting on pre-fitted assembly screws. Bayable by screw-fastening at the sides. 1200 2 x 6730.310 1 x 6730.340 Material: – Sheet steel 1600 1 x 6730.330 1 x 6730.340 From width 200/500/700 150/450/650 500 mm Supply includes: – Assembly parts 1 Ø 425 425 10 350 5 6. Ø Rittal Catalogue 34/System accessories 5 6. 437 Ø 6.5 6.5 10 Surface finish: – Zinc-plated 1 597 Interior installation Rail systems AE installation examples with TS system rails Rails for interior installation (preparing for installation) For enclosure depth mm Packs of 210 250 300 350 Page Model No. 4 pc(s). 2383.210 2383.250 2383.300 2383.350 605 Interior installation in the width and height TS punched section with mounting flange, 17 x 73 mm AE from enclosure width/height mm A1) mm Packs of 380 225 4 pc(s). 8612.130 8612.130 8612.130 8612.130 325 4 pc(s). 8612.140 8612.140 8612.140 8612.140 375 4 pc(s). 8612.040 8612.040 8612.040 8612.040 425 4 pc(s). 8612.150 8612.150 8612.150 8612.150 475 4 pc(s). 8612.050 8612.050 8612.050 8612.050 525 4 pc(s). 8612.160 8612.160 8612.160 8612.160 575 4 pc(s). 8612.060 8612.060 8612.060 8612.060 725 4 pc(s). 8612.180 8612.180 8612.180 – 775 4 pc(s). 8612.080 8612.080 8612.080 – 875 4 pc(s). 8612.090 8612.090 8612.090 – 925 4 pc(s). – – 8612.100 – 975 4 pc(s). – – 8612.000 – 1125 4 pc(s). – – 8612.120 – – 500 600 760 1000 1 1200 1400 TS support strip 1) Model No. 1175 4 pc(s). – 8612.020 – 400 325 20 pc(s). 4694.000 4694.000 4694.000 4694.000 500 425 20 pc(s). 4695.000 4695.000 4695.000 4695.000 600 525 20 pc(s). 4696.000 4696.000 4696.000 4696.000 800 725 20 pc(s). 4697.000 4697.000 4697.000 4697.000 606 609 A = Rail mounting distance 1 2 2 A 3 3 A X 1 X 598 Rittal Catalogue 34/System accessories Interior installation Rail systems CM installation examples with TS system rails Rails for interior installation (preparing for installation) For enclosure width/height mm Packs of Model No. 4 pc(s). 600 800 1000 1200 1400 5001.050 5001.051 5001.052 5001.053 5001.054 Page 605 Base configuration rail (preparing for installation) For enclosure depth Packs of Model No. 2 pc(s). 300 400 5001.371 5001.370 – – – – – – 1400 608 Installation in the width Packs of Model No. For enclosure width mm 600 800 1000 1200 A1) mm 575 775 975 1175 TS punched section with mounting flange, 4 pc(s). TS support strips 17 x 73 mm Support rail – 8612.060 8612.080 8612.000 8612.020 – 606 609 20 pc(s). 8800.130 4579.000 – – – Slotted 4 pc(s). 4396.000 4398.000 – – – 613 Unslotted 4 pc(s). 4396.500 4398.500 – – – 613 System support rails 2 pc(s). 4361.000 4362.000 4347.000 4363.000 – 613 C rails 30/15 6 pc(s). 4944.000 4945.000 4946.000 4947.000 – 612 Cable clamp rail 2 pc(s). 4191.000 4192.000 4336.000 4196.000 – 665 1 2 Installation in the height (individual installation e.g. with) TS punched section with mounting flange, 17 x 73 mm see page 606 TS support strips see page 609 Installation in the depth For enclosure depth mm A1) mm Packs of Model No. 300 225 4 pc(s). 8612.130 8612.130 8612.130 8612.130 8612.130 400 325 4 pc(s). 8612.140 8612.140 8612.140 8612.140 8612.140 TS punched section with mounting flange, 17 x 73 mm TS support strips TS punched rail, 400 325 20 pc(s). 4694.000 4694.000 4694.000 4694.000 4694.000 609 400 325 4 pc(s). 8612.240 8612.240 8612.240 8612.240 8612.240 609 400 275 12 pc(s). 4169.000 4169.000 4169.000 4169.000 4169.000 610 24 pc(s). 8800.370 8800.370 8800.370 8800.370 8800.370 619 18 x 38 mm PS punched rail, 23 x 23 mm with mounting bracket TS (2 per rail) 1) 606 A = Rail mounting distance A X 12 1 9 1 3 10 4 X 5 8 A 11 7 2 10 Rittal Catalogue 34/System accessories 6 599 Interior installation Rail systems TP pedestal/one-piece console Installation examples with TS system rails Rails for interior installation (preparing for installation) For enclosure width mm Packs of 600 800 1200 1600 675 675 675 675 5001.050 5001.050 5001.050 5001.050 For enclosure width mm 600 800 1200 1600 A1) mm 575 775 1175 1575 For enclosure height mm Model No. 4 pc(s). Page 605 Installation in the width Packs of Model No. TS punched section with mounting flange, 4 pc(s). 8612.060 8612.080 8612.020 – 606 TS support strips 20 pc(s). 8800.130 4579.000 – – 609 17 x 73 mm Installation in the height (individual installation e.g. with) TS support strips see page 609 TS punched rail, 18 x 38 mm see page 609 1 Installation in the depth For enclosure depth mm A1) mm Packs of 400 325 4 pc(s). 8612.140 8612.140 8612.140 8612.140 500 425 4 pc(s). 8612.150 8612.150 8612.150 8612.150 400 325 20 pc(s). 4694.000 4694.000 4694.000 4694.000 500 425 20 pc(s). 4695.000 4695.000 4695.000 4695.000 TS punched rail, 18 x 38 mm 400 325 4 pc(s). 8612.240 8612.240 8612.240 8612.240 500 425 4 pc(s). 8612.250 8612.250 8612.250 8612.250 PS punched rail, 23 x 23 mm 400 325 12 pc(s). 4169.000 4169.000 4169.000 4169.000 500 425 12 pc(s). 4170.000 4170.000 4170.000 4170.000 24 pc(s). 8800.370 8800.370 8800.370 8800.370 TS punched section with mounting flange, 17 x 73 mm TS support strips with mounting bracket TS (2 per rail) 1) Model No. 606 609 609 610 619 A = Rail mounting distance A X 6 1 7 4 1 2 5 3 X 4 600 A Rittal Catalogue 34/System accessories Interior installation Rail systems TP console Installation examples with TS system rails Rails for interior installation (preparing for installation) For enclosure width mm Packs of 600 800 1200 1600 Page Model No. 4 pc(s). 5001.050 5001.051 5001.053 5001.054 605 600 800 1200 1600 Installation in the height A1) mm Packs of For enclosure width mm Model No. TS punched section with mounting flange, 17 x 73 mm 1 For cover 375 4 pc(s). 8612.040 8612.040 8612.040 8612.040 606 For enclosure 425 4 pc(s). 8612.150 8612.150 8612.150 8612.150 606 TS support strips For cover 375 4 pc(s). 4309.000 4309.000 4309.000 4309.000 609 For enclosure 425 4 pc(s). 4695.000 4695.000 4695.000 4695.000 609 425 4 pc(s). 8612.250 8612.250 8612.250 8612.250 609 TS punched rail, 18 x 38 mm For enclosure 1) A = Rail mounting distance Console/desk unit/console lid 1 4 1 X A 2 A 3 1 X Rittal Catalogue 34/System accessories 601 Interior installation Rail systems TS/SE installation examples with TS system rails Installation between vertical sections in the width and depth Installation in roof and base frame in the width and depth Inner level Outer level A A A A A TS punched section with mounting flange, 17 x 73 mm For enclosure width/depth Packs of mm A A 1) A1) mm Model No. A1) mm Model No. A1) mm Model No. 300 4 pc(s). – – 275 8612.030 225 8612.130 400 4 pc(s). – – 375 8612.040 325 8612.140 500 4 pc(s). – – 475 8612.050 425 8612.150 600 4 pc(s). – – 575 8612.060 525 8612.160 800 4 pc(s). – – 775 8612.080 725 8612.180 1000 4 pc(s). – – 975 8612.000 925 8612.100 1200 4 pc(s). – – 1175 8612.020 1125 8612.120 Page 606 A = Rail mounting distance TS punched section with mounting flange, 23 x 73 mm A For enclosure width/depth Packs of mm 1) A1) mm Model No. A1) mm Model No. A1) mm Model No. 500 4 pc(s). – – 425 8612.550 – – 600 4 pc(s). – – 525 8612.560 – – 800 4 pc(s). – – 725 8612.580 – – 1000 4 pc(s). – – 925 8612.500 – – 1200 4 pc(s). – – 1125 8612.520 – – Model No. Page 607 A = Rail mounting distance TS punched section without mounting flanges, 45 x 88 mm For enclosure width/depth Packs of mm A 1) A1) mm Model No. A1) mm Model No. A1) mm 500 2 pc(s). 375 8612.650 375 8612.650 – – 600 2 pc(s). 475 8612.660 475 8612.660 – – 800 2 pc(s). 675 8612.680 675 8612.680 – – Page 608 A = Rail mounting distance A 602 Rittal Catalogue 34/System accessories Interior installation Rail systems TS/SE installation examples with TS system rails Installation between vertical sections in the width and depth Installation in roof and base frame in the width and depth Inner level Outer level A A A A A TS punched rail 25 x 38 mm (with snap-on nut M8) For enclosure width/depth Packs of mm 1) A1) mm Model No. A1) mm Model No. A1) mm Model No. 500 2 pc(s). – – 435 8612.750 – – 600 2 pc(s). – – 535 8612.760 – – 800 2 pc(s). – – 735 8612.780 – – A1) mm Model No. A1) mm Model No. A1) mm Model No. Page A 608 A = Rail mounting distance TS punched rail, 18 x 38 mm For enclosure width/depth Packs of mm 400 2 pc(s). 335 8612.240 – – 325 8612.240 500 2 pc(s). 435 8612.250 – – 425 8612.250 600 2 pc(s). 535 8612.260 – – 525 8612.260 800 2 pc(s). 735 8612.280 – – 725 8612.280 A Page 609 1) A = Rail mounting distance Two TS punched rails 18 x 38 mm are included in the supply of enclosures with a mounting plate to serve as an installation aid. After installing the mounting plate, the TS punched rail may be inserted, as shown here. TS support strips For enclosure width/depth Packs of mm A1) mm Model No. A1) mm Model No. A1) mm Model No. 400 20 pc(s). – – – – 325 4694.000 500 20 pc(s). – – – – 425 4695.000 600 20 pc(s). – – – – 525 4696.000 800 20 pc(s). – – – – 725 4697.000 400 20 pc(s). – – 375 4309.000 – – 500 20 pc(s). – – 475 4596.000 – – 600 20 pc(s). – – 575 8800.130 – – – 20 pc(s). – – 675 4598.000 – – 800 20 pc(s). – – 775 4579.000 – – – 20 pc(s). – – 875 4599.000 – – Page 609 A A 1) A = Rail mounting distance Alternatively, the TS support strip for the inner mounting level may also be used for mounting on the door. PS punched rails 23 x 23 mm (For installation options see support bracket TS/PS, angle bracket, mounting bracket) For enclosure width/depth Packs of mm 1) A A1) mm Model No. A1) mm Model No. A1) mm Model No. 400 12 pc(s). 275 4169.000 275 4169.000 – – 500 12 pc(s). 375 4170.000 375 4170.000 – – 600 12 pc(s). 475 4171.000 475 4171.000 – – 800 12 pc(s). 675 4172.000 675 4172.000 – – 1000 12 pc(s). 875 4173.000 875 4173.000 – – 1200 6 pc(s). 1075 4174.000 1075 4174.000 – – 1400 6 pc(s). 1275 4393.000 1275 4393.000 – – 1600 6 pc(s). 1475 4175.000 1475 4175.000 – – 1800 6 pc(s). 1675 4176.000 1675 4176.000 – – 2000 6 pc(s). 1875 4177.000 1875 4177.000 – – 2200 6 pc(s). 2075 4178.000 2075 4178.000 – – Page 610 A = Rail mounting distance Rittal Catalogue 34/System accessories 603 Interior installation Rail systems TS/SE installation examples with TS system rails Installation between vertical sections in the width and depth Installation in roof and base frame in the width and depth Inner level Outer level A A A A A PS punched section without mounting flange 23 x 73 mm (installation option with support bracket TS) For enclosure width/depth Packs of mm A 1) A1) mm Model No. A1) mm Model No. A1) mm Model No. 400 4 pc(s). 275 4374.000 275 4374.000 – – 500 4 pc(s). 375 4375.000 375 4375.000 – – 600 4 pc(s). 475 4376.000 475 4376.000 – – 800 4 pc(s). 675 4377.000 675 4377.000 – – 1000 4 pc(s). 875 4382.000 875 4382.000 – – 1200 4 pc(s). 1075 4378.000 1075 4378.000 – – 1800 4 pc(s). 1675 4379.000 1675 4379.000 – – 2000 4 pc(s). 1875 4380.000 1875 4380.000 – – 2200 4 pc(s). 2075 4381.000 2075 4381.000 – – Page 611 A = Rail mounting distance PS punched section with mounting flange 23 x 73 mm (installation options with TS adaptor rail when mounting on the vertical TS enclosure section) For enclosure width/depth Packs of mm A 1) A1) mm Model No. A1) mm Model No. A1) mm Model No. 400 4 pc(s). 335 8800.640 – 8800.640 – – 500 4 pc(s). 435 8800.650 – 8800.650 – – 600 4 pc(s). 535 4364.000 – 4364.000 – – 800 4 pc(s). 735 4365.000 – 4365.000 – – 1000 4 pc(s). 935 4373.000 – 4373.000 – – 1200 4 pc(s). 1135 4367.000 – 4367.000 – – A1) mm Model No. A1) mm Model No. A1) mm Model No. Page 612 A = Rail mounting distance A Support rails, slotted A For enclosure width/depth Packs of mm 400 4 pc(s). 335 4394.000 – – – – 500 2 pc(s). 435 4395.000 – – – – 600 2 pc(s). 535 4396.000 – – – – 800 2 pc(s). 735 4398.000 – – – – Page 613 Support rails, unslotted 400 4 pc(s). 335 – – – – – 500 2 pc(s). 435 – – – – – 600 2 pc(s). 535 4396.500 – – – – 800 2 pc(s). 735 4398.500 – – – – 613 1) A = Rail mounting distance Alternatively, the slotted and unslotted support rail may also be fitted on the vertical TS enclosure section using the snap-on nut M8, adaptor rail or TS punched rail 25 x 38 mm. 604 Rittal Catalogue 34/System accessories Interior installation Rail systems Rails for interior installation for AE For mounting in the enclosure, no machining required. Suitable for all-round mounting on the sides, base and roof areas. Benefits: ◾ Only one screw for attaching the rail inside the enclosure ◾ Larger mounting space than with the previous rail, thanks to separate adaptor for door-operated switches (included with the supply) ◾ Compatibility with TS 8 system accessories ◾ Enclosure protection category is retained (no machining required) ◾ Automatic potential equalisation ◾ May be retrospectively installed even with the mounting plate in situ. Suitable for installation via gland plates Packs of Model No. 210 4 pc(s). 2383.210 250 4 pc(s). 2383.250 300 4 pc(s). 2383.300 350 4 pc(s). 2383.350 Configuration examples: A Variable with 2 rows of system punchings, creates additional mounting space e.g. for ◾ TS punched section with mounting flange ◾ Enclosure lights ◾ Door-operated switch ◾ Door stay ◾ Cable conduit holder For enclosure depth mm Material: – Sheet steel X Note: Other mounting options: – Mounting plates, locatable, 8612.400, see page 616 – Mounting plates, screw-fastening, large, 8612.410, see page 616 – Mounting plates, screw-fastening, small, 4532.000, see page 617 – Mounting brackets, 4597.000, see page 617 A Surface finish: – Zinc-plated X A = Bar centre distance Rails for interior installation Width mm for CM, TP For mounting on the existing threaded bolts. With TS system punchings on three sides. CM Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts TP1) Height mm Packs of Model No. CM TP2) 600 600 – 675 4 pc(s). 5001.050 800 800 800 960 4 pc(s). 5001.051 1000 1000 1000 – 4 pc(s). 5001.052 1200 1200 1200 – 4 pc(s). 5001.053 – 1600 1400 – 4 pc(s). 5001.054 1) Only with TP console and desk unit (cover or rear panel/base), one-piece console in cover 2) Only with TP pedestal/one-piece console Configuration examples: See page 599 Rittal Catalogue 34/System accessories 605 Interior installation Rail systems TS punched section with mounting flange, 17 x 73 mm Variable, with 5 rows of holes for universal skeleton structures or partial assembly. Simply locate into the TS punchings and secure. Installation options: ◾ On the vertical TS enclosure section – On the outer mounting level, all-round, at the same height – On the inner mounting level, all-round, heightoffset ◾ In the tubular door frame for TS, SE and PC ◾ For SE, may additionally be mounted on the top horizontal section in the depth ◾ In CM and TP via rail for interior installation – In the depth, for outer mounting level – In the width, for inner mounting level Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws Also required: – For installation in CM, TP: Rail for interior installation, see page 605 Accessories: – Screws, see page 625 – Cable tie for fast assembly 2597.000, see page 667 For enclosure width/depth mm Packs of Model No. 300 4 pc(s). 8612.130 400 4 pc(s). 8612.140 500 4 pc(s). 8612.150 600 4 pc(s). 8612.160 800 4 pc(s). 8612.180 1000 4 pc(s). 8612.100 1200 4 pc(s). 8612.120 For the inner mounting level or for tubular door frames For door For enclosure width width/depth (for (for inner tubular mounting level) door mm frame) mm Length mm Packs Model No. of 400 300 290 4 pc(s). 8612.030 500 400 390 4 pc(s). 8612.040 600 500 490 4 pc(s). 8612.050 – 600 590 4 pc(s). 8612.060 800 – 690 4 pc(s). 8612.070 900 800 790 4 pc(s). 8612.080 1000 – 890 4 pc(s). 8612.090 – 1000 990 4 pc(s). 8612.000 – 1200 1190 4 pc(s). 8612.020 Configuration examples: See from page 598 Attachment TS Packs of Model No. for TS punched section with mounting flange, 17 x 73 mm 12 pc(s). 8612.010 Benefits: ◾ For attaching the TS punched section with mounting flange where access to installed equipment, such as mounting plates, is blocked by the screw fastening ◾ May also be screw-fastened onto the punched section with mounting flange or enclosure frame and used as a support for contact hazard protection covers or master switch trim panels 606 For the outer mounting level Material: – Sheet steel Surface finish: – Zinc-plated Rittal Catalogue 34/System accessories Interior installation Rail systems TS punched section with mounting flange, 17 x 73 mm Depth-variable To fit the outer and inner mounting level. Length mm Packs of Model No. 530 – 700 2 pc(s). 7000.678 Material: – Sheet steel Surface finish: – Zinc-plated TS punched section with mounting flange, 23 x 73 mm The alternative to the TS punched section with mounting flange 17 x 73 mm, see page 606, with punchings for captive nuts/threaded blocks instead of the slotted holes top and bottom. Simply locate and secure. Installation options: ◾ On the vertical TS, SE enclosure section Material: – Sheet steel For the inner mounting level For enclosure width/ depth mm Packs of Model No. 500 4 pc(s). 8612.550 600 4 pc(s). 8612.560 800 4 pc(s). 8612.580 1000 4 pc(s). 8612.500 1200 4 pc(s). 8612.520 Accessories: Surface finish: – Zinc-plated – Screws, see page 625 – Threaded blocks, captive nuts, see page 624 Supply includes: – Assembly screws Configuration examples: See page 598 Rittal Catalogue 34/System accessories 607 Interior installation Rail systems TS punched sections without mounting flanges 45 x 88 mm Heavy top-mounted equipment mounted directly on the internal surfaces (e.g. roof) is supported. Mounted on the side or rear, the enclosure can then be screw-fastened securely to the machine. The twin profile with 11 rows of holes offers numerous additional opportunities for interior installation. Installation options: ◾ On the vertical and horizontal TS, SE enclosure section Material: – Sheet steel Surface finish: – Zinc-plated For the inner mounting level For enclosure width/depth mm Packs of Model No. 500 2 pc(s). 8612.650 600 2 pc(s). 8612.660 800 2 pc(s). 8612.680 Accessories: – Screws, see page 625 – Threaded blocks, captive nuts, see page 624 Configuration examples: See page 598 Supply includes: – Assembly parts TS punched rail 25 x 38 mm For heavy installed equipment, with attachment holes. Installation options: ◾ On the vertical TS, SE enclosure section With 9 mm round holes on a 25 mm pitch pattern on all sides, for mounting ◾ Support rails, see page 614 ◾ System support rails, see page 613 ◾ C rails 30/15, see page 612 ◾ Cable clamp rails (right angle section), see page 665 ◾ Customer assemblies Material: – Sheet steel, 3.0 mm Surface finish: – Zinc-plated For enclosure width/depth mm Packs of Model No. 500 2 pc(s). 8612.750 600 2 pc(s). 8612.760 800 2 pc(s). 8612.780 Also required: – Snap-on nut M8, 8800.808, see page 618 Note: – In conjunction with the snap-on nut, particularly well-suited for dynamic connections Configuration examples: See page 598 Supply includes: – Assembly screws Base configuration rail for CM, TP For mounting in the enclosure depth, on the existing threaded bolts, no machining required. TS system punchings on 2 sides. Creates additional installation options. For enclosure depth mm Packs of Model No. 400 2 pc(s). 5001.370 300 2 pc(s). 5001.371 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts 608 Rittal Catalogue 34/System accessories Interior installation Rail systems TS punched rail 18 x 38 mm For enclosure width/depth mm Packs of Model No. 400 4 pc(s). 8612.240 500 4 pc(s). 8612.250 600 4 pc(s). 8612.260 800 4 pc(s). 8612.280 Simply locate and secure with a screw. The location system makes assembly and dismantling easier. It only needs to be secured on one side, but may be secured on both sides if required. Installation options: ◾ On the vertical TS, SE enclosure section – On the outer mounting level ◾ On the horizontal TS, SE enclosure section ◾ On base configuration rail for CM Material: – Sheet steel Surface finish: – Zinc-plated Accessories: – Screws, see page 625 – Cable tie for fast assembly 2597.000, see page 667 – Cable clamps, see page 666 Configuration examples: See from page 598 Supply includes: – Assembly screws Note: – In enclosures with a mounting plate, 2 punched rails are already included with the supply TS support strips For the outer mounting level Installation options: ◾ On the vertical and horizontal TS, SE enclosure section – On the outer mounting level, all-round, at the same height – On the inner mounting level, all-round, heightoffset ◾ On the tubular door frame TS, SE ◾ On the perforated door strip CM, TP For Length Packs of enclosure width/depth mm mm Material: – Sheet steel Model No. 400 340 20 pc(s). 4694.000 500 440 20 pc(s). 4695.000 600 540 20 pc(s). 4696.000 800 740 20 pc(s). 4697.000 Accessories: – Screws, see page 625 – Cable tie for fast assembly 2597.000, see page 667 Surface finish: – Zinc-plated Supply includes: – Assembly screws Configuration examples: See from page 598 For the inner mounting level and for mounting on doors For enclosure width/depth mm For door width mm Length mm Packs of Model No. – 400 290 20 pc(s). 4594.000 400 500 390 20 pc(s). 4309.000 500 600 490 20 pc(s). 4596.000 600 – 590 20 pc(s). 8800.130 – 800 690 20 pc(s). 4598.000 800 900 790 20 pc(s). 4579.000 – 1000 890 20 pc(s). 4599.000 Rittal Catalogue 34/System accessories 609 Interior installation Rail systems TS assembly block Packs of Model No. Installation in the vertical TS, SE enclosure sections for mounting PS-compatible individual components. 4 pc(s). 8800.310 Material: – Die-cast zinc Supply includes: – Assembly screws Adaptor rail for PS compatibility Installation in the vertical TS, SE enclosure sections (across the entire enclosure height or in subsections), and in the case of SE, may additionally be fitted to the top horizontal section in the width (must be cut to length depending on the width of the enclosure), in order to achieve compatibility with: ◾ PS punched rail, 23 x 23 mm ◾ PS punched section without mounting flange, 23 x 73 mm ◾ PS punched section with mounting flange, 23 x 73 mm Material: – Sheet steel Possible alternative: – Snap-on nut, see page 618 For enclosure height mm Packs of Model No. 1800 4 pc(s). 8800.380 2000 4 pc(s). 8800.300 2200 4 pc(s). 8800.320 Accessories: – Screws, see page 625 Possible alternative: – Snap-on nut, see page 618 Surface finish: – Zinc-plated Supply includes: – Assembly screws PS punched rails 23 x 23 mm Length mm For WHD mm Packs of Model No. for TS, SE 295 400 12 pc(s). 4169.000 Installation options: ◾ On the vertical enclosure section – Directly via support brackets TS – Via adaptor rail for PS compatibility in conjunction with angle brackets, mounting brackets or support brackets PS ◾ On the horizontal enclosure section – Directly via angle brackets, mounting brackets or support brackets PS 395 500 12 pc(s). 4170.000 495 600 12 pc(s). 4171.000 695 800 12 pc(s). 4172.000 895 1000 12 pc(s). 4173.000 1095 1200 6 pc(s). 4174.000 1295 1400 6 pc(s). 4393.000 1495 1600 6 pc(s). 4175.000 1695 1800 6 pc(s). 4176.000 1895 2000 6 pc(s). 4177.000 2095 2200 6 pc(s). 4178.000 Material: – Sheet steel Surface finish: – Zinc-plated Also required: – U nuts, see page 624 – Mounting brackets TS/PS, see page 619 or – Angle brackets, support brackets TS/PS, see page 620 Accessories: – Cable attachment, see page 667 – Screws, see page 625 – Cable tie for fast assembly 2597.000, see page 667 Configuration examples: See from page 598 610 Rittal Catalogue 34/System accessories Interior installation Rail systems Punched rail 23 x 23 mm for Flex-Block Supports tool-free installation in two levels via a plug-in system in the Flex-Block depth. For the installation of cable clamp rails. Installation options: – In the width and depth Length mm For width/depth mm Packs of Model No. 245 400 12 pc(s). 4169.500 345 500 12 pc(s). 4170.500 445 600 12 pc(s). 4171.500 645 800 12 pc(s). 4172.500 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – 12 punched rails – Assembly parts for mounting PS punched section without mounting flange 23 x 73 mm for TS, SE Installation options: ◾ On the vertical enclosure section – Directly via support brackets TS – Via adaptor rail for PS compatibility in conjunction with support brackets PS ◾ On the horizontal enclosure section – Directly via support brackets PS Material: – Sheet steel Surface finish: – Zinc-plated Accessories: – Cable clamp rail (4193.000 etc.), see page 665 Length mm For WHD mm Packs of Model No. 295 400 4 pc(s). 4374.000 395 500 4 pc(s). 4375.000 495 600 4 pc(s). 4376.000 695 800 4 pc(s). 4377.000 895 1000 4 pc(s). 4382.000 1095 1200 4 pc(s). 4378.000 1695 1800 4 pc(s). 4379.000 1895 2000 4 pc(s). 4380.000 2095 2200 4 pc(s). 4381.000 Also required: – Support brackets PS/TS, see page 620 Accessories: – Screws, see page 625 – Cable tie for fast assembly 2597.000, see page 667 – U nuts, see page 624 Configuration examples: See page 598 Rittal Catalogue 34/System accessories 611 Interior installation Rail systems PS punched section with mounting flange, 23 x 73 mm Installation in the enclosure width/depth TS mm Packs of Model No. 400 4 pc(s). 8800.640 500 4 pc(s). 8800.650 600 4 pc(s). 4364.000 800 4 pc(s). 4365.000 1000 4 pc(s). 4373.000 1200 4 pc(s). 4367.000 for TS, SE Variable, with 5 rows of holes for universal skeleton structures or partial assembly. Simply locate into the system punchings and secure. Installation options: ◾ On the vertical TS enclosure section – Via adaptor rail for PS compatibility ◾ On the horizontal TS enclosure section ◾ In the case of SE, may additionally be fitted to the horizontal section at the bottom (width/depth) and top (width) Material: – Sheet steel Surface finish: – Zinc-plated Also required: – Adaptor rail for PS compatibility (when mounting on the vertical TS, SE enclosure section), see page 610 Configuration examples: See page 598 Supply includes: – Assembly screws C rails 30/15 to EN 60 715 for TS, SE Installation options: ◾ On the vertical TS, SE enclosure section – Via snap-on nut 8800.808 (Fig. 1) – Via adaptor rail for PS compatibility ◾ On the horizontal TS enclosure section (Fig. 2) ◾ In the case of SE, additionally on the horizontal section – In the width, bottom/top – In the depth, bottom (without mounting plate) – In the depth, top using snap-on nuts 8800.808 (Fig. 1) ◾ On base configuration rail for CM Material: – Sheet steel 1 2 Surface finish: – Zinc-plated For enclosure width/depth mm Length mm Packs of Model No. 500 455 6 pc(s). 4943.000 600 555 6 pc(s). 4944.000 800 755 6 pc(s). 4945.000 1000 955 6 pc(s). 4946.000 1200 1155 6 pc(s). 4947.000 Accessories: – – – – – Cable clamps, see page 666 Support bracket or spacer, see page 621 Quick-assembly block, see page 621 Snap-on nut M8, 8800.808, see page 618 Adaptor rail, see page 610 Possible alternative: – Rail for EMC shielding bracket and strain relief, see page 641 612 Rittal Catalogue 34/System accessories Interior installation Rail systems C rails for TS, SE For direct external mounting between the horizontal or vertical TS, SE enclosure sections. Thanks to the universal mounting piece, the C rails may optionally be attached to the inner or outer level of the TS 8 frame. Material: – Sheet steel For enclosure width/depth mm Length mm Packs of Model No. 400 298 4 pc(s). 7828.040 500 398 4 pc(s). 7828.050 600 498 4 pc(s). 7828.060 800 698 4 pc(s). 7828.080 1000 898 4 pc(s). 7828.100 1200 1098 4 pc(s). 7828.120 Surface finish: – Zinc-plated Supply includes: – Assembly parts System support rails For heavy installed equipment such as transformers. T-head screw and slot in the support rail accommodate all mounting dimensions. Installation options: ◾ On the vertical TS, SE enclosure section – Via snap-on nut 8800.808 (Fig. 1) – Via adaptor rail for PS compatibility – Height-offset, via TS punched rail 25 x 38 mm (Fig. 2) ◾ On the horizontal TS enclosure section – In the width – In the depth (without mounting plate) ◾ In the case of SE, additionally on the horizontal section – In the width, bottom/top – In the depth, bottom (without mounting plate) – In the depth, top (without mounting plate) using snap-on nuts 8800.808 (Fig. 1) ◾ On base configuration rail for CM Accessories: – Cable clamps, see page 666 For enclosure width mm Packs of Model No. 600 2 pc(s). 4361.000 800 2 pc(s). 4362.000 1000 2 pc(s). 4347.000 1200 2 pc(s). 4363.000 Accessories: – Width divider e.g. for the installation of 2 system support rails (for 600 mm width) in 1200 mm wide enclosures, see page 523 – Snap-on nut M8, 8800.808, see page 618 – Adaptor rail, see page 610 – TS punched rail 25 x 38 mm, see page 608 1 2 1 2 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – 2 system support rails (45 x 25 mm) – 4 T-head screws M12 x 60 mm – Assembly parts Support rails for TS, SE, CM For heavy installed equipment. Particularly suitable for the installation of base isolators. Installation options: ◾ On the vertical TS, SE enclosure section – Via snap-on nut 8800.808 (Fig. 1) – Via adaptor rail for PS compatibility – Height-offset, via TS punched rail 25 x 38 mm (Fig. 2) ◾ On the horizontal TS enclosure section – In the width – In the depth ◾ In the case of SE, additionally on the horizontal section – In the width – In the depth, top using snap-on nut 8800.808 ◾ On base configuration rail for CM Model No. Model No. Slotted Unslotted 4 pc(s). 4394.000 – 4 pc(s). 4395.000 – 600 4 pc(s). 4396.000 4396.500 800 4 pc(s). 4398.000 4398.500 For enclosure width/depth mm Packs of 400 500 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Accessories: – Snap-on nut M8, 8800.808, see page 618 – Adaptor rail, see page 610 – TS punched rail 25 x 38 mm, see page 608 Configuration examples: See from page 598 Rittal Catalogue 34/System accessories 613 Interior installation Rail systems Support rail 65 x 42 mm for TS, SE For enclosure width mm Packs of Model No. 600 2 pc(s). 8612.960 800 2 pc(s). 8612.980 Benefits: ◾ For heavy assemblies up to 5000 N per support rail Permissible static load: – 10000 N per enclosure Material: – Steel 28.5 Surface finish: – Zinc-plated Supply includes: – Assembly parts 20 535/735 575/775 Support rails TS 35/15 to EN 60 715 for TS, SE Mounting on the TS vertical section via – Snap-on nut M8, 8800.808, see page 618 – Assembly block see page 610 or – Adaptor rail, see page 610 Support rails TS 35/7.5 and TS 35/15 to EN 60 715 for KL, KL-HD, AE Length sized to the enclosure width 614 For enclosure width/depth mm Support rails length mm Packs of Model No. 500 455 6 pc(s). 4933.000 600 555 6 pc(s). 4934.000 800 755 6 pc(s). 4935.000 1200 1155 6 pc(s). 4937.000 Version Packs of Model No. For enclosure width mm Support rails length mm 150 137 200 187 10 pc(s). 2314.000 10 pc(s). 300 287 2315.000 10 pc(s). 400 2316.000 387 10 pc(s). 2317.000 500 487 10 pc(s). 2318.000 600 587 10 pc(s). 2319.000 TS 35/7.5 TS 35/15 Support rails Version Length Packs of Model No. to EN 60 715 Standard length 2 m TS 35/15 2m 6 pc(s). 2313.150 TS 35/7.5 2m 6 pc(s). 2313.750 Mounting clip Packs of Model No. for support rails For fast, secure attachment of ◾ Cable ducts ◾ Mounting plates ◾ Mounting angles on support rail TS 35/7.5 and TS 35/15 to EN 60 715. Simply pre-assemble the mounting clip on the part to be installed, then snap into position on the support rail. 30 pc(s). 2309.000 Rittal Catalogue 34/System accessories Interior installation Rail systems TS punched rail 17 x 17 mm for TS Mounting angle with TS pitch on three sides. Suitable for ◾ Building an auxiliary construction for dividing the busbar space ◾ Individual use as mounting frame for low and medium loads ◾ Fastening to the internal or external mounting level of the TS 8 enclosure Material: – Sheet steel, 1.5 mm Surface finish: – Zinc-plated Note: – Where necessary, punched rails should be shortened to the applicable mounting dimension Length For compartment depth mm For compartment height Top mm For compartment height Bottom mm For enclosure width/depth mm Inner mounting level Outer mounting level Packs of Model No. Page 62.5 425 – – – – 12 pc(s). 9673.915 137.5 600 – – – – 12 pc(s). 9673.920 262.5 425/800 – – – 400 12 pc(s). 9673.940 487.5 – 350 – 500 350 – 400 400/500 500/600 12 pc(s). 9673.953 787.5 – 550 – 800 450 – 700 600/800 800 12 pc(s). 9673.983 862.5 – – 750 – 800 – – 12 pc(s). 9673.995 Frame connector piece 24 pc(s). 9673.901 T-connector piece 24 pc(s). 9673.903 622 Corner connector 10 pc(s). 9673.902 622 Also required Rittal Catalogue 34/System accessories 622 615 Interior installation Rail systems C rails for TS, SE For attaching cables and lines and for mounting stacking insulators. Material: – Sheet steel For enclosure width/depth mm Length (L) mm Packs of Model No. 600 600 4 pc(s). 9660.210 800 800 4 pc(s). 9660.220 For enclosure width/depth mm Packs of Model No. 600 2 pc(s). 9674.056 800 2 pc(s). 9674.058 Supply includes: – 4 C rails – 8 brackets – Assembly parts L Punched sections with mounting flanges for coupling section For assembling a Maxi-PLS or Flat-PLS busbar system directly beneath or above the circuit-breaker. This punched section with mounting flange may be used without conflict in conjunction with the compartment space side panel modules. It is attached to the outer level of the TS 8 enclosure system, but the PS punchings support a mounting level as in the roof or base frame, thereby facilitating the use of busbar system attachment for the roof/base section. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Mounting plates Packs of Model No. Locatable on ◾ The vertical TS, SE enclosure section ◾ TS punched section with mounting flange, 17 x 73 mm 4 pc(s). 8612.400 Technical details: Available on the Internet Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws Mounting plates Packs of Model No. Screw-fastened, large On all enclosures and mounting parts with system punchings on a 25 mm pitch pattern. 4 pc(s). 8612.410 Material: – Sheet steel Technical details: Available on the Internet Surface finish: – Zinc-plated Supply includes: – Assembly screws 616 Rittal Catalogue 34/System accessories Interior installation Rail systems Mounting plates Packs of Model No. Screw-fastened, small 4 pc(s). 4532.000 Material: – Sheet steel Technical details: Available on the Internet Surface finish: – Zinc-plated Supply includes: – Assembly screws Mounting plate TS Packs of Model No. with integral top-hat rail For direct snap-mounting of components such as speed control, enclosure internal thermostat and hygrostat. 1 pc(s). 7526.964 Mounting bracket Packs of Model No. May be screw-fastened onto all enclosures and mounting parts with system punchings on a 25 mm pitch pattern. 4 pc(s). 4597.000 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Mounting plate (mounting accessories included) Material: – Sheet steel Accessories: Surface finish: – Zinc-plated – Screws, see page 625 – Cable tie for fast assembly 2597.000, see page 667 Supply includes: – Assembly screws Technical details: Available on the Internet Mounting bracket for interior installation For installing punched sections with mounting flanges and support strips in: ◾ Comfort Panel horizontal/vertical from 74 mm installation depth or for installing in: ◾ Optipanel from an installation depth of 100 mm Packs of Model No. 4 pc(s). 6205.100 Technical details: Available on the Internet Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Comfort Panel Front panel width 482.6 mm (19˝) Punched sections with mounting flanges Support strips Rittal Catalogue 34/System accessories Horizontal Vertical Horizontal Vertical Page 8612.150 606 4695.000 609 617 Interior installation Assembly components Snap-on nut TS Metric thread for vertical TS, SE enclosure section. To install, insert into slot and clip into position. The snap-on nut is then secure. By tightening the screw, it is securely tightened against the section, and potential equalisation is automatically created. Installation options: ◾ On the vertical TS, SE enclosure section and on the horizontal SE enclosure section (top, in the width) – With metric thread M6 or M8 – The alternative to metal screws – Particularly well-suited for dynamically loaded connections Thread Packs of Model No. M6 20 pc(s). 8800.806 M8 20 pc(s). 8800.808 Accessories: – Multi-tooth screw M6 x 12 or M8 x 12, see page 625 Material: – Precision-cast stainless steel 1 2 Accessories for interior installation Support rails, see page 613 Cable clamp rails, see page 665 C rails 30/15, see page 612 System support rails, see page 613 TS punched rail, 25 x 38 mm, see page 608 3 4 5 Adaptor bracket TS Packs of Model No. For external mounting of ◾ System lights ◾ Cable ducts on the vertical TS enclosure section and on the horizontal SE enclosure section (top, in the width) 6 pc(s). 8800.360 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws 618 Rittal Catalogue 34/System accessories Interior installation Assembly components Mounting bracket TS Packs of Model No. Offers variable mounting options for the punched rail 23 x 23 mm, e.g. for supporting external surfaces or creating an additional internal level. 24 pc(s). 8800.370 Material: – Die-cast zinc Accessories: – U nuts (recommendation: M6), see page 624 Supply includes: – 24 screws 5.5 x 13 mm Installation options: ◾ On the vertical TS, SE enclosure section – flush with the outer edge of the enclosure or – flush with the enclosure clearance width Support of the external surfaces with two Two installation options for the inner mounting level: mounting options: ◾ Without mounting plate (photograph) ◾ With mounting plate (drawing) If there is no divider panel fitted With a divider panel fitted, and without or with a mounting plate in a set forward position Mounting bracket PS Packs of Model No. For variable attachment of punched rail 23 x 23 mm. 24 set(s) 4182.000 Installation options: ◾ Optionally flush with: – Outer enclosure edge or – Enclosure clearance width ◾ On the vertical TS, SE enclosure section via – Adaptor rail for PS compatibility, see page 610 ◾ On the horizontal TS enclosure section ◾ On the horizontal SE enclosure section, bottom ◾ On the horizontal SE enclosure section, top in the depth ◾ On enclosures and rails with rectangular system punching 12.5 x 10.5 mm Also required: – U nuts (recommended: M6), see page 624 – Multi-tooth screws M6 x 12 mm, see page 625 Material: – Die-cast zinc Supply includes: – 1 set = 1 mounting bracket, 1 screw M6 x 12 mm, 1 captive nut M6 Rittal Catalogue 34/System accessories 619 Interior installation Assembly components Angle bracket PS Packs of Model No. For quick attachment of punched rails 23 x 23 mm. 12 set(s) 4181.000 Installation options: ◾ On the vertical TS, SE enclosure section via – Adaptor rail for PS compatibility, see page 610 ◾ On the horizontal TS enclosure section ◾ On the horizontal SE enclosure section, bottom ◾ On the horizontal SE enclosure section, top in the depth ◾ On enclosures and rails with rectangular system punching 12.5 x 10.5 mm Also required: – U nuts (recommended: M6), see page 624 – Multi-tooth screws M6 x 12 mm, see page 625 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – 1 set = 1 angle bracket, left, 1 angle bracket, right, 2 screws 5.5 x 13 mm Support bracket TS For the attachment of ◾ Punched sections without mounting flanges 23 x 73 mm or ◾ Punched rails 23 x 23 mm Installation options: ◾ On the vertical TS, SE enclosure section – on a 25 mm pitch pattern – in 2 mm increments ◾ On the horizontal SE enclosure section, in the width, top Packs of Model No. 6 set(s) 8800.330 Also required: – U nuts (recommended: M6), see page 624 – Multi-tooth screws M6 x 12 mm, see page 625 Material: – Die-cast zinc Supply includes: – 1 set = 1 support bracket, 1 stay, 3 screws 5.5 x 13 mm Support bracket PS Packs of Model No. For the attachment of ◾ Punched sections without mounting flanges 23 x 73 mm or ◾ Punched rails 23 x 23 mm 24 set(s) 4183.000 Installation options: ◾ On the vertical TS enclosure section via – Snap-on nut 8800.806, see page 618 or – Adaptor rail for PS compatibility, see page 610 ◾ On the horizontal TS enclosure section ◾ On the horizontal SE enclosure section, bottom ◾ On the horizontal SE enclosure section, top in the depth ◾ On enclosures and rails with square system punchings 12.5 x 10.5 mm Also required: – U nuts (recommended: M6), see page 624 – Multi-tooth screws M6 x 12 mm, see page 625 – Adaptor rail for PS compatibility (when mounting on the vertical enclosure section), see page 610 Material: – Die-cast zinc Supply includes: – 1 set = 1 support bracket, 2 countersunk screws, 2 serrated lock washers 620 Rittal Catalogue 34/System accessories Interior installation Assembly components Bracket/spacer For the attachment of C rails, punched rails or cable clamp rails (angle section). On the sides, to accommodate square sections or cable tubes (Ø 20 mm). Attachment points with M8 thread. Installation options: ◾ On the vertical TS, SE enclosure section via – Snap-on nut 8800.808, see page 618 or – Adaptor rail for PS compatibility, see page 610 ◾ On the horizontal TS enclosure section ◾ On the horizontal SE enclosure section, bottom ◾ On the horizontal SE enclosure section, top in the depth ◾ On enclosures and rails with rectangular system punching 12.5 x 10.5 mm Packs of Model No. 6 set(s) 4199.000 Material: – Die-cast zinc Supply includes: – 1 set = 1 bracket or spacer, 2 screws M8 x 16 mm, 2 spring lock washers, 2 captive nuts M8, 2 serrated lock washers, 2 screws Accessories: – Angle piece 4134.000, see page 621 Quick-assembly block Packs of Model No. For a variety of installation options. 12 pc(s). 4133.000 Installation options: ◾ On the vertical TS, SE enclosure section via – Snap-on nut 8800.808, see page 618 or – Adaptor rail for PS compatibility, see page 610 ◾ On the horizontal TS enclosure section ◾ On the horizontal SE enclosure section, bottom ◾ On the horizontal SE enclosure section, top in the depth ◾ On enclosures and rails with rectangular system punching 12.5 x 10.5 mm Material: – Die-cast zinc Supply includes: – 12 quick-assembly blocks – 12 threaded blocks M8 – 24 screws M8 x 12 mm – 24 square nuts M8 Angle piece Packs of Model No. For assembling punched rails and mounting surfaces with a 45° incline. 12 set(s) 4134.000 Installation options: ◾ On the vertical TS, SE enclosure section via – Snap-on nut 8800.806, see page 618 or – Adaptor rail for PS compatibility, see page 610 ◾ On the horizontal TS enclosure section ◾ On the horizontal SE enclosure section, bottom ◾ On the horizontal SE enclosure section, top in the depth ◾ On enclosures and rails with rectangular system punching 12.5 x 10.5 mm Rittal Catalogue 34/System accessories Material: – Angle pieces: Die-cast zinc – Insulating pieces: Plastic Supply includes: – 1 set = 1 angle piece, 1 insulating piece, 1 insulating screw, 2 assembly screws, 1 threaded block M6 621 Interior installation Assembly components Frame connector piece Packs of Model No. for TS punched rail 17 x 17 mm Mounting part with integral M4 threads for attaching the TS punched rail 17 x 17 mm to the horizontal and vertical TS frame section (outer level). The frame adaptor piece can be used as a self-holding construction aid in the TS pitch and fastened with a screw to the frame. Can also be used for fastening other sections with TS pitch. 24 pc(s). 9673.901 T-connector piece Packs of Model No. for TS punched rail 17 x 17 mm Mounting piece with integral M4 threaded holes for attaching the TS punched rail 17 x 17 mm ◾ to the horizontal and vertical TS chassis ◾ to TS punched rail 17 x 17 mm ◾ to the vertical TS frame section (internal level). The T-connector piece may be inserted into the TS pitch pattern as a self-holding construction and attached to the frame with a screw. Can also be used for fastening other sections with TS pitch. 24 pc(s). 9673.903 Corner connector Packs of Model No. for TS punched rail 17 x 17 mm Mounting part with integral M4 threads for connecting two TS punched rails 17 x 17 mm at an angle of 90° across the corner. Required for building the auxiliary construction for the busbar space separation. 10 pc(s). 9673.902 Material: – Die-cast zinc Supply includes: – Assembly parts Material: – Die-cast zinc Supply includes: – Assembly parts Material: – Die-cast zinc Supply includes: – Assembly parts 622 Rittal Catalogue 34/System accessories Interior installation Assembly components Universal bracket Packs of Model No. For the installation of ◾ Enclosure lights in – Compact enclosures AE ◾ Door-operated switches in – Compact enclosures AE – TopConsole system TP ◾ Cable conduit holders 2593.000 and 2591.000 in – Compact enclosures AE ◾ Support rails for terminals in – Command panels and command panel housings with door Mounting screws are concealed when the door is closed. Existing holes for mounting blocks or hinges may be used with AE. 6 pc(s). 2373.000 Ø 4.2 8 28 Material: – Sheet steel, zinc-plated Supply includes: – Assembly parts 45 Cable retainer For individual rail mounting. Material: – Sheet steel, zinc-plated Cable retainer Packs of Model No. Flat 20 pc(s). 2365.000 Inclined 20 pc(s). 2366.000 35 M5 47 35° 30 M6 Ø7 Ø7 60 60 73 81 Mounting block Packs of Model No. for AE As an accessory for additional interior installation, e.g. mounting of cable ties, PS punched rails, top hat rails and C rails (e.g. for a second pair of mounting angles). 20 pc(s). 2574.000 Supply includes: – Assembly parts Rittal Catalogue 34/System accessories 623 Interior installation Assembly components U nuts for ◾ Punched rail 23 x 23 mm ◾ Punched section without mounting flange, 23 x 73 mm ◾ Punched section without mounting flange, 45 x 88 mm ◾ Punched section with mounting flange, 23 x 73 mm For mounting punched rails and punched sections without mounting flanges on angle brackets, mounting brackets and support brackets, we recommend U nuts with M6 thread (4179.000). Captive nuts/threaded blocks Installation options: On enclosures and rails with rectangular system punching 12.5 x 10.5 mm for example on: ◾ TS, SE enclosure section, – vertically, via adaptor rail for PS compatibility – TS horizontally, direct ◾ SE horizontally, bottom, direct ◾ SE horizontally, top (in the depth only), direct ◾ Punched rails 23 x 23 mm ◾ Punched section without mounting flange, 23 x 73 mm ◾ Punched section without mounting flange, 45 x 88 mm ◾ Punched section with mounting flange, 23 x 73 mm Captive nuts The compression spring, designed as an insertion aid, ensures reliable mechanical and electrical connection in the system punchings. Threaded block With snap-off insertion aid, die-cast zinc. Captive nuts The nuts are inserted from the same side as screwfastening takes place. Consequently, attachment points in the same height or width may also be used around corners. The spring cage also ensures electrical connection in the system punchings. 624 Thread Packs of Model No. M4 20 pc(s). 4119.000 M5 20 pc(s). 4157.000 M6 20 pc(s). 4179.000 M8 20 pc(s). 4180.000 Accessories: – Multi-tooth screws M6 x 12 mm, for 4179.000, see page 625 Possible alternative: – On the vertical TS enclosure section TS snap-on nuts, see page 618 Thread Packs of Model No. M5 50 pc(s). 4166.000 M6 50 pc(s). 4164.000 M8 50 pc(s). 4165.000 Thread Packs of Model No. M6 50 pc(s). 4162.000 M8 50 pc(s). 4163.000 Thread Packs of Model No. M6 50 pc(s). 8800.340 M8 50 pc(s). 8800.350 Rittal Catalogue 34/System accessories Interior installation Assembly components Spring nut M5 Packs of Model No. For ◾ Comfort Panel from an installation depth of 74 mm ◾ Optipanel from an installation depth of 100 mm ◾ Compact Panel The spring ensures reliable protection against unintentional displacement. 50 pc(s). 6108.000 Threaded inserts M6 Packs of Model No. for KS For securing installed equipment to the moulded bosses in the door and in the enclosure rear panel. Screw length available for insertion: 8 mm. 20 pc(s). 1482.000 Other interior installation, e.g. with ◾ Mounting bracket 4597.000 (see page 617) or ◾ Mounting bracket for interior installation 6205.100 (see page 617) Material: – Sheet steel, zinc-plated Multi-tooth screws M6 x 12 to fit: ◾ Snap-on nuts (8800.806) ◾ U nuts for punched rails (4179.000) ◾ Captive nuts (4164.000) ◾ Threaded blocks (4162.000) Multi-tooth drive for optimum transmission of torques, an extended tool life and increased safety and reliability when tightening and loosening screw connections. Type of screw Size mm Packs of Model No. M8 x 12 to fit: ◾ Snap-on nut (8800.808) Multi-tooth screws M6 x 12 M8 x 12 300 pc(s). 2504.500 300 pc(s). 2504.800 Metal multi-tooth screws Metal multi-tooth screws 5.5 x 13 300 pc(s). 2486.500 Metal multi-tooth screws for stainless steel 5 x 13 300 pc(s). 2486.300 M5 x 10 M5 x 12 500 pc(s). 2504.000 500 pc(s). 2488.000 M5 x 12 500 pc(s). 2489.000 M5 x 12 500 pc(s). 2489.500 For the round holes 4.5 mm diameter in the enclosure section, punched rails and punched sections without mounting flanges. Self-tapping screws For the round holes 4.5 mm diameter in the enclosure section, punched rails and punched sections without mounting flanges. Self-tapping screws: ◾ Hex screws ◾ Posidrive raised countersunk screws ◾ Pan-head screws, posidrive ◾ Multi-tooth pan-head screws Self-tapping screws ST 4.8 x 16 300 pc(s). 2487.000 Self-tapping screws Mark, drill and tighten in a single operation using electric or pneumatic tools. For metal thickness: 0.8 – 3 mm Length: 16 mm Usable length: 9.5 mm Width across flats: 8 mm Rittal Catalogue 34/System accessories 625 Interior installation Assembly components TS adaptor for wiring systems Adaptor rail for the Lütze LSC wiring system Supply includes: – 1 set = 6 adaptor rails, 24 spring lock washers, 24 screws 5.5 x 13 mm For enclosure depth mm Packs of 500 600 800 Model No. 8800.150 1 set(s) 8800.160 8800.180 Note: – Mounting parts for the LCS wiring system not included with the supply Kit Packs of Model No. for separate frame TS Every TS 8 frame is easily converted to a rack suitable for dismantling. To this end, the frame sections in the roof and base frame are separated, optionally in the width or depth. The four connection components are inserted into the frame section and screwfastened. The external dimensions of the frame remain unchanged. 4 pc(s). 7829.400 Supply includes: – Assembly parts Note: – The maximum achievable IP protection category is restricted by separation of the frame. 626 Rittal Catalogue 34/System accessories Interior installation Component shelves for frame attachment Component shelf for frame attachment Material: – Sheet steel Enclosure width 600 and 800 mm for TS and for upgrading existing DK-TS applications For installation in enclosures without 482.6 mm (19˝) accommodation. Max. depth of component shelves = Enclosure depth -100 mm Supply includes: – Assembly parts Colour: – RAL 7035 Technical specifications: – Mounting bolts or mounting rails may be installed on a 25 mm pitch pattern in the enclosure depth. – Mounting hole for handles provided. – Slotted component shelf 4 3 1 2 Enclosure width 600 mm Load capacity kg (surface load, static) 50 50 50 50 100 100 100 100 Component shelf depth mm 400 500 600 700 400 500 600 700 29 29 29 29 45 45 45 45 Component shelf height mm Model No. 7164.035 7165.035 7166.035 7166.735 7464.035 7465.035 7466.035 7466.735 Enclosure width 800 mm Load capacity kg (surface load, static) 50 50 50 50 100 100 100 100 Component shelf depth mm 400 500 600 700 400 500 600 700 Component shelf height mm 29 29 29 29 45 45 45 45 Model No. Fastening bolts Mounting rails Installation kit Telescopic slides 7184.035 7185.035 7186.035 7186.735 7484.035 7485.035 7486.035 7486.735 Also required: TS punched section with mounting flange 17 x 73 mm as installation kit for enclosure depth mm, see page 606 500 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 8612.050 600 8612.060 8612.060 8612.060 8612.060 8612.060 8612.060 8612.060 8612.060 800 8612.080 8612.080 8612.080 8612.080 8612.080 8612.080 8612.080 8612.080 1000 8612.000 8612.000 8612.000 8612.000 8612.000 8612.000 8612.000 8612.000 1200 8612.020 8612.020 8612.020 8612.020 8612.020 8612.020 8612.020 8612.020 Accessories: Telescopic slides, see page 632 7061.000 7081.000 7161.000 7161.700 7064.000 7065.000 7066.000 7066.700 Handles for component shelves, see page 633 5501.730 5501.730 5501.730 5501.730 5501.730 5501.730 5501.730 5501.730 Hinged cable support see page 633 Component shelf, pull-out For enclosures1) for TS, PC, IW For direct mounting on the vertical TS enclosure section. Width mm Load capacity: – 40 kg surface load, static Material: – Sheet steel Depth mm Support area Width mm Depth mm Model No. 600 600 465 545 6902.9602) 600 800 465 745 6902.980 1) For enclosures without a mounting plate 2) May also be installed in 800 mm deep enclosures based on TS (pull-out rear attachment) Colour: – RAL 7015 Supply includes: – 2 telescopic slides. Rittal Catalogue 34/System accessories 627 Interior installation Component shelves for frame attachment Component shelf, static installation for TS, PC, IW prepared for fan expansion kit For direct mounting on the vertical TS enclosure section. Simply locate into 4 pre-fitted screws and secure. Load capacity: – 40 kg surface load, static Material: – Sheet steel For enclosures1) 1) Support area Width mm Depth mm Width mm Depth mm Model No. 600 600 507 550 8800.900 600 800 507 750 8800.910 For enclosures without a mounting plate Accessories: – Fan expansion kit 7980.XXX, see page 438 Colour: – RAL 7015 Supply includes: – Assembly parts Drawer tray Packs of Model No. Pull-out For enclosures with TS frame construction in series IW, PC. Width 600 mm and depth 600 – 800 mm Tray height: 83 mm 1 pc(s). 6902.700 Load capacity: – 40 kg surface load, static Material: – Sheet steel Colour: – RAL 7035 Supply includes: – 2 telescopic slides 628 Rittal Catalogue 34/System accessories Interior installation Component shelves for attachment to the 19˝ system punchings Component shelf, 482.6 mm (19˝) installation Enclosures with two 482.6 mm (19˝) mounting levels for TS and for upgrading existing DK-TS applications Depending on their depth, the component shelves have several attachment points, so the distance between the 482.6 mm (19˝) mounting angles is variable within certain limits. Each component shelf secured in this way can be retrospectively upgraded to full withdrawal using telescopic slides. For this purpose, the telescopic slides are screw-fastened in place of the spacers. T 200 (T 500) 100 50 50 29 Load capacity: – 50 kg surface load, static Also required: – Adaptor for L-shaped mounting angles TS, see page 632 – Installation kit, depth variable 7063.850, for flexible mounting on L-shaped mounting angles, see page 631 Material: – Sheet steel Colour: – RAL 7035 Supply includes: – Assembly parts Component shelf width mm 409 409 409 Component shelf depth mm 400 500 600 409 700 Distance between levels (X) 348/398 348/448/498 448/548/598 548/648/698 Model No. 7144.035 7145.035 7145.635 7145.735 Telescopic slides for 50 kg, see page 632 7061.000 7081.000 7161.000 7161.700 Handles for component shelf, see page 633 5501.730 5501.730 5501.730 5501.730 Accessories: Hinged cable support see page 633 For TS: Note for installation in network enclosures based on TS, L-shaped mounting angle: If L-shaped mounting angles are used, adaptor 7827.300, see page 632, is required. For TS, 482.6 mm (19˝) system punchings: Note regarding flexible installation between two L-shaped mounting angles: May be mounted directly on the 482.6 mm (19˝) system punchings using the depth-variable installation kit, 7063.850, see page 631. X 4 2 3 2 1 Spacers Telescopic slides Adaptors Telescopic slides Installation kit, depth-variable X Distance between levels Rittal Catalogue 34/System accessories 629 Interior installation Component shelves for attachment to the 19˝ system punchings Component shelf, static installation 482.6 mm (19˝), depth-variable for TS-IT For static installation between two 482.6 mm (19˝) mounting levels. ◾ Depth-variable to adapt to individual distances between levels ◾ Toolless, time-saving one-man assembly Distance between levels mm Load capacity, static kg Height U Packs of Model No. 400 – 600 50 ½ 1 set(s) 5501.655 600 – 900 50 ½ 1 set(s) 5501.665 400 – 600 100 1 1 set(s) 5501.695 600 – 900 100 1 1 set(s) 5501.705 Packs of Model No. Material: – Sheet steel Surface finish: – Spray-finished Colour: – RAL 9005 Supply includes: – Assembly parts Component shelf, pull-out 482.6 mm (19˝) for TS-IT For mounting between two 482.6 mm (19˝) mounting levels. ◾ Depth-variable to adapt to individual distances between levels ◾ Toolless, time-saving one-man assembly from the enclosure front ◾ Self-locking ◾ Full withdrawal Material: – Sheet steel Surface finish: – Spray-finished Load Distance between capacity, Height Depth static U mm levels kg mm 400 – 600 50 1 500 1 set(s) 5501.675 600 – 900 50 1 700 1 set(s) 5501.685 400 – 600 100 1½ 500 1 set(s) 5501.715 600 – 900 100 1½ 700 1 set(s) 5501.725 Accessories: – Handle for component shelf 5501.730, see page 633 Colour: – RAL 9005 Supply includes: – Component shelf, slotted – Telescopic slide with mounting kit – Assembly parts Component shelf 1 U, static installation 482.6 mm (19˝) for 482.6 mm (19˝) system punchings The ideal support surface for small active components such as modems or mini-hubs in 482.6 mm (19˝) or metric levels. Load capacity: – 10 kg surface load, static Component shelf depth mm Model No. 140 7119.140 Also required: – Captive nuts, see page 624 – Screws, see page 625 Material: – Sheet steel Colour: – RAL 7035 Note: – Cannot be combined with server telescopic slides – Free installation height inside the U approx. 35 mm 630 Rittal Catalogue 34/System accessories Interior installation Component shelves for attachment to the 19˝ system punchings Component shelf 2 U, static installation 482.6 mm (19˝) for 482.6 mm (19˝) system punchings For mounting between 482.6 mm (19˝) mounting angles. Component shelf depth mm Colour RAL Packs of Model No. 7035 1 pc(s). 7119.250 9005 1 pc(s). 5501.615 7035 1 pc(s). 7119.400 9005 1 pc(s). 5501.625 250 400 Load capacity: – 25 kg surface load, static Material: – Sheet steel Surface finish: – Spray-finished Supply includes: – Assembly parts Installation kit, depth-variable for 482.6 mm (19˝) component shelves Depending on the distance between the two 482.6 mm (19˝) levels, the installation kit is screwfastened directly to the 482.6 mm (19˝) system punchings in the depth. Note: – Not suitable for combination with telescopic slides Also required: – Captive nuts, see page 624 – Screws, see page 625 482.6 mm (19˝) distance between levels mm Packs of Model No. 550 – 850 2 pc(s). 7063.850 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Rittal Catalogue 34/System accessories 631 Interior installation Installation kits/accessories for component shelves TS punched section with mounting flange, 17 x 73 mm Installation in enclosure depth mm Packs of Model No. as installation kit for component shelves Simply locate and secure. One pack is sufficient for 2 component shelves. 500 4 pc(s). 8612.050 600 4 pc(s). 8612.060 800 4 pc(s). 8612.080 Load capacity: – 100 kg surface load, static 1000 4 pc(s). 8612.000 1200 4 pc(s). 8612.020 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Adaptor for L-shaped mounting angles Packs of Model No. 4 pc(s). 7827.300 for TS network enclosures For mounting component shelves and slide rails on L-shaped mounting angles. Material: – Sheet steel Supply includes: – Assembly parts Telescopic slides 3 2 1 Load capacity 50 kg for component shelves in TS and for upgrading existing DK-TS applications Fixed component shelves are easily converted to full withdrawal. For this purpose, the existing fastening bolts or mounting rails (heavy-duty version) are exchanged for the telescopic slides. For component shelf depth mm Packs of Model No. 400 2 pc(s). 7061.000 500 2 pc(s). 7081.000 600 2 pc(s). 7161.000 Technical specifications: – For installation and locking on a 25 mm pitch pattern in the enclosure depth 700 2 pc(s). 7161.700 For component shelf depth mm Packs of Model No. 400 2 pc(s). 7064.000 500 2 pc(s). 7065.000 600 2 pc(s). 7066.000 700 2 pc(s). 7066.700 Load capacity: – 50 kg/100 kg per set Material: – Sheet steel Surface finish: – Zinc-plated Load capacity 100 kg Assembly bolts Mounting rails Telescopic slides 632 Rittal Catalogue 34/System accessories Interior installation Accessories for component shelves Cable support hinged, with quick-release fastener For secure routing of connection cables from the component shelf to the clamping point. The attachment may be released on both sides thanks to the quick-release fastener. For enclosure depth mm Model No. < 600 7163.500 > 600 7163.550 For enclosure depth mm Model No. < 600 7163.560 > 600 7163.565 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Cable support hinged, with anti-kink device and quick-release fastener For secure routing of connection cables from the component shelf to the clamping point. Kink-free cable routing in the central part via mobile chain links. The attachment may be released on both sides, thanks to the quick-release fastener. Material: – Sheet steel, zinc-plated – Centre part: Plastic Supply includes: – Assembly parts Handles Packs of Model No. for pull-out component shelves The component shelves are prepared for the attachment of handles. 2 pc(s). 5501.730 Fastening bolts Packs of Model No. for slotted component shelves For non-slip attachment of your components. The bolts are screwed into the longitudinal slots of the component shelf support surface. Consequently, they are infinitely adjustable and can be adapted to suit any appliance. 4 pc(s). 7115.000 Material: – Die-cast zinc Surface finish: – Spray-finished, silver-grey Supply includes: – Assembly parts Rittal Catalogue 34/System accessories 633 Interior installation System lights System lights ◾ for direct attachment in all large enclosures ◾ for mounting on compact enclosures, wallmounted enclosures and in the console system with system accessories Protection category IP to IEC 60 529: – IP 20 Technical comparison/equipment Page Voltage supply Installation type Mounting options ◾ – 120 V, 60 Hz ◾ – – – – 230 V, 50 Hz ◾ – – – – 24 V (DC) – – – ◾ ◾ – ◾ ◾ ◾ – ◾ ◾ – – – Compact fluorescent lamp, base 2G11 – – ◾ – – Fluorescent lamp T5 – – – ◾ – ◾ LEDs, cold white – – – – I (PE conductor) ◾ ◾ ◾ – – II (all-insulated) – – – ◾ – III (SELV) – – – – ◾ Screw-fastening ◾ ◾ ◾ ◾ ◾ Clip attachment – – – ◾ ◾ Magnet attachment (accessory) – – – ◾ ◾ TS roof frame (horizontal section) direct ◾ ◾ ◾ ◾ ◾ TS, SE vertical section with adaptor bracket ◾ ◾ ◾ – – direct – – – ◾ ◾ SE roof frame (front and rear sections) with adaptor bracket ◾ ◾ ◾ – – direct – – – ◾ ◾ direct ◾ ◾ ◾ ◾ ◾ with universal bracket ◾ ◾ ◾ – – with magnet attachment – – – ◾ ◾ SE roof frame (side sections) with rail for interior installation 634 ◾ ◾ ◾ – – ◾ ◾ ◾ ◾3) ◾ Door-operated switch ◾ ◾ – ◾ ◾ Through-wiring (series connection of several lights) ◾ ◾ ◾ – ◾ UL/cUL ◾2) – ◾2) ◾2) –1) ENEC ◾2) ◾ – ◾2) – – – ◾2) – – Light cover – ◾ ◾ ◾ ◾ Light cone adjustment – – – – ◾ Integral sockets, earthing-pin ◾2) ◾ ◾2) – – Integral sockets, USA ◾2) – – – – – – ◾ – – ◾2) ◾2) – – – Integral door-operated switch 3) 637 636 ◾ Integral motion detector 2) System light LED 635 VDE 1) Compact light ◾ Infeed/connection cable Equipment Universal light 635 AE Approvals Courtesy light – AE, CM, TP Connection options Standard light 635 Fluorescent lamp, base G13 Protection category Accessories: – Adaptor bracket, see page 618 – Universal bracket, see page 623 – Rail for interior installation, see page 605 100 – 240 V, 50/60 Hz Full-electronic ballast Light Also required: – Connection accessories, see page 639 Safety extra-low voltage, not required by the standard Depending on the equipment Integral Rittal Catalogue 34/System accessories Interior installation System lights Universal light Material: – Plastic With integral motion detector Benefits: ◾ Insulated plastic housing ◾ Efficient compact fluorescent tube ◾ Simple attachment of the light to the enclosure Supply includes: – Mounting clips Also required: – Connection accessories, see page 639 Socket Width mm Height mm Depth mm Model No. Approvals Earthing-pin 343 95 55 4155.110 VDE – 343 95 55 4155.010 VDE – 343 95 55 4155.510 UL Technical specifications 18 W, 110 – 240 V, 50 – 60 Hz Courtesy light Without door operated switch Technical specifications Socket Width mm Height mm Depth mm Model No. Approvals ENEC 14 W, 100 – 240 V, 50/60 Hz Earthing-pin 452 117 50 4139.140 18 W, 100 – 240 V, 50/60 Hz Earthing-pin 682 117 50 4139.180 ENEC 30 W, 100 – 240 V, 50/60 Hz Earthing-pin 987 117 50 4139.300 ENEC Socket Width mm Height mm Depth mm Model No. Approvals ENEC With door operated switch Technical specifications 14 W, 100 – 240 V, 50/60 Hz Earthing-pin 452 117 50 4139.150 18 W, 100 – 240 V, 50/60 Hz Earthing-pin 682 117 50 4139.190 ENEC 30 W, 100 – 240 V, 50/60 Hz Earthing-pin 987 117 50 4139.350 ENEC Socket Width mm Height mm Depth mm Model No. Approvals 14 kW, 230 V, 50 Hz Earthing-pin 452 117 50 4138.140 ENEC 18 W, 230 V, 50 Hz Earthing-pin 682 117 50 4138.180 ENEC 30 W, 230 V, 50 Hz Earthing-pin 987 117 50 4138.300 ENEC 14 W, 120 V, 60 Hz USA 452 117 50 4138.240 cURus 18 W, 120 V, 60 Hz USA 682 117 50 4138.280 cURus 30 W, 120 V, 60 Hz USA 987 117 50 4138.400 cURus Technical specifications Socket Width mm Height mm Depth mm Model No. Approvals 14 W, 230 V, 50 Hz Earthing-pin 452 117 50 4138.150 ENEC 18 W, 230 V, 50 Hz Earthing-pin 682 117 50 4138.190 ENEC 30 W, 230 V, 50 Hz Earthing-pin 987 117 50 4138.350 ENEC 14 W, 120 V, 60 Hz USA 452 117 50 4138.250 cURus 18 W, 120 V, 60 Hz USA 682 117 50 4138.290 cURus 30 W, 120 V, 60 Hz USA 987 117 50 4138.450 cURus Also required: – Connection accessories, see page 639 Standard light Without door operated switch Technical specifications With door operated switch Also required: – Connection accessories, see page 639 Rittal Catalogue 34/System accessories 635 Interior installation System lights Compact light Colour: – Similar to RAL 7035 Slimmer – Faster – Brighter ◾ Slimmer: Around 50% less height and depth and therefore around 75% less volume than conventional lights ◾ Faster: Universal fast attachment via clips, screws, or powerful magnets (optional). Simply slide in at the side or rear, fit the light, and it's done! ◾ Brighter: Up to 75% greater luminous efficiency from the lamp with the same power helps to cut electricity costs ◾ Door-operated switch can also be connected via a 2-pole connection Model No. ENEC 24 cURus Protection category IP to IEC 60 529: – IP 20 Supply includes: – Compact light with clip and screw mounting kits, including assembly parts Accessories: – Mounting kit magnet, see page 636 – Door-operated switch with connection cable, see page 639 4140.010 – 4140.020 – 4140.110 4140.120 – 4140.2101) – 4140.2201) – – Rated voltage 100 – 240 V ±10 % at 50 – 60 Hz Wattage 8 24 V (DC) ±10 % 14 Protection category 8 14 II (all-insulated) Width (B1) mm 455 705 455 705 Mounting distance (B2) mm Clip/magnet 400 650 400 650 Mounting distance (B3) mm 475 725 475 725 Yellow Yellow – – 0.35 – – 0.57 Connection cable 3 m (open end) Cover colour Yellow Rated current A – at 230 V – at 110 V – at 24 V (DC) Grey 0.045 – 0.088 0.083 – 0.149 – Light Grey 0.073 – 0.127 0.149 – 0.216 – Fluorescent lamp T5 Operating unit Wide-range electronic ballast Circuit-breakers Electronic ballast Integral, on/off/door-operated switch mode Light cover Transparent, grooved on the inside Cable deflector across rear 1) Yellow ◾ – ◾ – ◾ ◾ Only for the North American market B1 Clip/magnet attachment Screw attachment 59 24 B .5 B B Ø6 B A B2 A B3 A A Rear attachment B Side attachment 636 Mounting kit magnet Packs of Model No. For reliable adhesion on all sheet steel surfaces. 2 pc(s). 4140.000 Rittal Catalogue 34/System accessories Interior installation System lights LED system light in 24 V (DC) version ◾ Max. EMC compatibility ◾ Protected, thanks to use within the safety extralow voltage range ◾ Economical energy use ◾ Low-maintenance thanks to the use of LEDs ◾ May be connected to a door-operated switch ◾ Integral through-wiring ◾ Universal attachment options ◾ Vertically hinged light cone Model No. Material: – Light body: Extruded aluminium – Light cover: Polycarbonate (halogen-free) – Light ends: PC-ABS Colour: – Similar to RAL 7035 Protection category IP to IEC 60 529: – IP 20 Supply includes: – LED system light with clip and screw mounting kits, assembly parts 4140.810 Rated voltage 4140.820 4140.830 4140.840 24 V (DC) (±10 %) No. of LEDs 10 20 Protection category 30 40 530 III (SELV) Width (B1) mm 230 330 430 Mounting distance CLIP (B2) mm 175 275 375 475 Mounting distance, screw attachment (B3) mm 250 350 450 550 Rated current A1) 0.04 0.08 0.12 0.16 Circuit-breakers 1) Integral on/off/door-operated switch mode Maximum baying up to a total rated current strength of 2 amps Also required: – LED connection cable, see page 638 or – Door operated switch with LED connection cable, see page 638 Note: – Only intended for use in enclosures and sealed cases! – When using on customer-supplied power packs, it is important to obtain the requisite approvals depending on the application Accessories: – Mounting kit magnet, see page 636 – Door-operated switch with LED connection cable, see page 638 – Connection cable, LED, see page 638 – Adaptor power pack, see page 638 20.64 B2 8.2 32.8 B3 B1 Light, 1 U Packs of Model No. Complete ready-to-connect light for installation in the 482.6 mm (19˝) mounting level. The slot attachment additionally allows it to be fastened to the 25 mm system punchings. 1 pc(s). 7109.200 Technical specifications: – Fluorescent tube 8 W, 230 V, 50 Hz – Mains switch – 2.5 m connection cable – Earthing-pin connector Rittal Catalogue 34/System accessories Material: – Aluminium, anodised – Plastic 637 Interior installation System lights Connection accessories for LED system light Connection cable 1 LED connection cable Door-operated switch 3 4 Model No. 3000 1 pc(s). 4315.800 Length mm Packs of Model No. 3000 1 pc(s). 4315.810 With LED interconnecting cable 1000 1 pc(s). 4315.820 Length mm Packs of Model No. 600 1 pc(s). 4315.830 1000 1 pc(s). 4315.840 3000 1 pc(s). 4315.850 Technical specifications Packs of Model No. 100 – 230 V/24 V (DC), 1 A 1 pc(s). 4315.860 LED interconnecting cable Adaptor power pack Packs of With LED connection cable Interconnecting cable 2 Length mm Adaptor power pack Layout diagram for LED system light 24 V (DC): Connection cable Door-operated switch with LED connection cable (open end/cable bush) Door-operated switch with LED interconnecting cable LED interconnecting cable for through-wiring 1 3 5 2 4 +U GND 638 Rittal Catalogue 34/System accessories Interior installation System lights Connection accessories Accessories: The following components can be used for timesaving and simple installation of the lights: Connection cable for – Cable ties for quick assembly, see page 667 1 Model No. UL Length mm Packs of Orange Grey Power supply (with socket, without connector) – 3000 5 pc(s). 4315.100 – Power supply (with socket and strain relief, without connector) ◾ 3000 1 pc(s). – 4315.150 Through-wiring (with socket and connector) ◾ 600 1 pc(s). – 600 – 1000 – 4000 Through-wiring/infeed via connection component 2507.500 (with socket and connector) Door-operated switch With mounting accessories UL Length mm Technical specifications 1 pc(s). – 4315.200 – 4315.600 – 3 Model No. Orange Yellow Grey 600 1 pc(s). 4315.520 – – 1000 1 pc(s). 4315.320 – – 600 – – 4315.550 – 4315.350 – 4315.710 – – – 4315.720 With connection cable (not required for universal lights and standard/courtesy lights with integral door-operated switch) ◾ Without connection cable ◾ – With connection cable (for compact light) – 600 240 V, 6 A 1 pc(s). 125 V (DC), 8 A 1 pc(s). 24 V, 6 A 24 V (DC), 6 A 1 pc(s). 1 pc(s). ◾ 600 1 pc(s). – 4315.450 Packs of 1000 Door-operated switch With toggle 5 pc(s). – 4315.400 Without connection cable, for TS enclosures with installed large swing frame. The toggle is actuated via the tubular door frame of the sheet steel door, or in the case of glazed doors, via an adaptor included with the supply. 2 – 4127.010 UL Technical specifications ◾ 240 V, 6 A 125 V (DC), 8 A 24 V, 6 A 24 V (DC), 6 A Connection component with circuit-breaker 10 A 4 Packs of Model No. 1 pc(s). 4127.210 5 Packs of Model No. Reduce assembly costs: Power is supplied rapidly and reliably to system and workstation lights via connection cables. For independently configured cables, connector 2507.200 must be used. Connection component to be snapped onto the top hat rail. 1 pc(s). 2507.500 6 For self-assembly Packs of Model No. Sockets for power supply through-wiring 5 pc(s). 2507.100 Connectors for connection component through-wiring 5 pc(s). 2507.200 T distributor with 2 sockets, 1 connector 5 pc(s). 2507.300 Connector for door-operated switch cable 5 pc(s). 2507.400 Connection cable for infeed Connection cable for through-wiring/infeed Door-operated switch with connection cable 1 7 2 3 Rittal Catalogue 34/System accessories 639 Interior installation EMC EMC side panels for TS Automatic potential equalisation via assembly components, and a high level of EMC protection thanks to a special EMC seal. For enclosures Packs of Model No. 600 2 pc(s). 8106.750 800 2 pc(s). 8108.750 Height mm Depth mm 2000 2000 Material: – Sheet steel, 1.5 mm Surface finish: – Aluminium zinc coated, powder-coated on the outside Colour: – RAL 7035 Supply includes: – Assembly parts EMC baying seal Cross-section mm Model No. 6.3 x 6.3 8800.690 EMC divider panel seal Packs of Model No. This seal ensures optimum contact in bayed EMC enclosure systems and when using a zinc-plated divider panel. 1 pc(s). 4348.000 for TS For baying enclosure systems. Seal with all-round, electrically conductive sheathing. Supply includes: – 3 seals, length 2 m each Material: – PU foam with electrically conductive sheathing Supply includes: – 1 roll (12.7 x 12.7 x 5300 mm) 640 Rittal Catalogue 34/System accessories Interior installation EMC Rail for EMC shielding bracket and strain relief Combined rail for strain relief and EMC contacting of inserted cables. Mounting options ◾ On the horizontal/vertical TS, SE, PC enclosure section ◾ On a mounting plate May also be fitted without a retaining bracket Additional contacting on the left or right of the rail via existing holes (9 mm diameter) Width mm Packs of Model No. 600 1 pc(s). 2388.600 800 1 pc(s). 2388.800 1000 1 pc(s). 2388.000 1200 1 pc(s). 2388.120 Also required: – EMC shielding bracket, see page 641 – Cable clamps for strain relief, see page 666 Material: – Sheet steel Accessories: Surface finish: – Zinc-plated – Earth straps, see page 644 – Earthing braid, see page 644 Supply includes: – 1 rail – 2 retaining brackets – Assembly parts Technical details: Available on the Internet EMC shielding bracket Quick assembly without the use of tools: Press the EMC shielding bracket against the cable shield and clip into the rail. Diameter changes are compensated in full by the spring of the EMC shielding bracket. Material: – Sheet steel For shield diameter mm Packs of Model No. 3 – 10 10 pc(s). 2388.100 4 – 15 10 pc(s). 2388.150 10 – 20 10 pc(s). 2388.200 15 – 28 10 pc(s). 2388.280 Width mm Packs of Model No. 600 1 set(s) 8800.660 800 1 set(s) 8800.680 1000 1 set(s) 8800.6001) 1200 1 set(s) 8800.6201) Surface finish: – Zinc-plated EMC gland plates For shielded cables with a maximum diameter of 20 mm. Combined EMC/IP seal provides low-resistance contact between cable shield and gland plate. For all 400, 500, 600 and 800 mm deep enclosures in conjunction with standard gland plates. 1) For one enclosure half only Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – 1 gland plate with T-head punching – 1 sliding gland plate – 2 IP/EMC gaskets Rittal Catalogue 34/System accessories 641 Interior installation EMC EMC cable glands Cable glands, metric The cable sheathing may optionally be interrupted at the contact point or removed completely inside the enclosure. The cable shield in the enclosure is retained. The supplied lock nut cuts automatically into the paint when screwed down, thus creating a conductive connection. Protection category IP to IEC 60 529: – IP 68 Possible alternative: 1) – Hygienic Design cable gland, see page 659 EMC shield bus Made of clear chromated steel strip, 75 mm2 cross section, for cable shield contact. Supply includes: – Assembly parts EMC earth clamps The clamps may be used directly on the device or operating equipment on the mounting plate for cable shield contact. Material: – Sheet steel Surface finish: – Zinc-plated 1) Contact cutter The contact cutter enables EMC-compatible preparation of the contact point e.g. for earthing braids. Plastic-bound abrasive with guide pin for round system punchings. With location point for drill, grinder etc. Size Cablediameter mm M16 4.5 – 10 M20 6 – 12 M25 11 – 17 M32 Minimum1) shield diameter mm Packs of Model No. 3 5 pc(s). 2843.160 5 5 pc(s). 2843.200 8 5 pc(s). 2843.250 15 – 21 10 1 pc(s). 2843.320 M40 19 – 28 15 1 pc(s). 2843.400 M50 27 – 38 19 1 pc(s). 2843.500 M63 34 – 44 30 1 pc(s). 2843.630 Minimum shield diameter = Cable diameter minus cable sheathing Bar length mm Connections Packs of Model No. 375 10 1 pc(s). 2413.375 550 16 1 pc(s). 2413.550 Size mm Packs of Model No. 4 50 pc(s). 2367.040 6 50 pc(s). 2367.060 8 50 pc(s). 2367.080 12 50 pc(s). 2367.120 16 50 pc(s). 2367.160 20 25 pc(s). 2367.2001) 2 assembly brackets For 1) Model No. Frame section 2414.000 Earthing bolts1) 2414.500 Not necessary with TS Contact paint Packs of Model No. Contact paint prevents the corrosion of conductive, unprotected contact points. 1 pc(s). 2415.000 Contents: – 12 ml 642 Rittal Catalogue 34/System accessories Interior installation For areas at risk of earthquakes TS 8 for earthquake zone 1, 2 and 3 to Bellcore 8806.500: W x H x D 800 x 2000 x 600 mm TS 8 for earthquake zone 4 to Bellcore 8806.500: W x H x D 800 x 2000 x 600 mm With base/plinth (base/plinth components front and rear, see page 513 and base/plinth trim panel, side, see page 514), 100 mm high. Fitted with: – Earthquake kit and – Earthquake base/plinth, see page 643 Note: – These versions have been tested and meet the requirements to Telcordia GR 63-CORE. They should be seen as a comparative variable to the customer's own plant, since empty enclosures cannot be certified. (Photo shows TS 8 for earthquake zone 4 to Bellcore) 3 2 4 Technical details: Available on the Internet 1 Earthquake kit Material: – Sheet steel For enclosures WxHxD mm Packs of Model No. 800 x 2000 x 600 1 pc(s). 8613.860 3 Surface finish: – Zinc-plated Supply includes: 2 side reinforcements, bottom 2 bracing struts each, sides 8 gusset plates Mounting plate attachment and reinforcement, 2 including assembly parts Earthquake base/plinth Height 100 mm Material: – Corner pieces: Sheet steel 5 mm – Trim panels: Sheet steel 2 mm For enclosures W x D mm Packs of Model No. 800 x 600 1 pc(s). 8601.860 4 Surface finish: – Powder-coated Colour: – RAL 7022 Supply includes: – 1 set = 4 corner pieces 2 depth stays 1 trim panel each front and rear fully assembled Rittal Catalogue 34/System accessories 643 Interior installation Earthing Earth straps For configuring a reliable earthing connection with perfect contact. ◾ With ring terminals in M6 and M8 to match the earthing screws ◾ Length-optimised and ready to install Connection facility Enclosure Door/lid Enclosure Mounting plate KL M6 M6 M8 EB/BG M6 M6/M81) – M6 M62)/M8 M8 AE KE/KEL M8 M8 M8 CM/TP M6 M8 M8 TS/SE M8 M8 M8 PC M8 M8 – 1) 2) Crosssection mm2 Length mm Packs of Model No. M8 – M8 4 170 5 pc(s). 2564.000 M8 – M8 16 170 5 pc(s). 2565.000 M8 – M8 25 170 5 pc(s). 2566.000 M6 – M6 10 200 5 pc(s). 2565.100 M8 – M8 4 300 5 pc(s). 2567.000 M6 – M8 10 300 5 pc(s). 2565.110 M8 – M8 10 300 5 pc(s). 2565.120 M8 – M8 16 300 5 pc(s). 2568.000 M8 – M8 25 300 5 pc(s). 2569.000 Connection M8 with BG 1050.900 M6 with AE 1032.XXX/AE 1035.XXX Earthing braid Tin-plated copper, in various lengths and cross-sections with press-fitted contact rings. Earthing braids counteract the current displacement effect at high frequencies, whilst at the same time offering highly flexible connection opportunities. For Cross section mm2 Length mm Packs of Model No. M6 10 200 10 pc(s). 2412.210 M8 16 200 10 pc(s). 2412.216 M8 25 200 10 pc(s). 2412.225 M6 10 300 10 pc(s). 2412.310 M8 16 300 10 pc(s). 2412.316 M8 25 300 10 pc(s). 2412.325 Assembly parts Size Packs of Model No. for system punchings For fastening the earth straps and earthing braids to: ◾ Horizontal TS enclosure sections ◾ PS rail systems ◾ Horizontal SE enclosure sections (in the depth only, top) M6 10 set(s) 2570.000 M8 10 set(s) 2559.000 Also required: – For mounting on the horizontal TS, SE enclosure section: Captive nuts, see page 624 Assembly parts Size Packs of Model No. for gland plates For fastening the earth straps and earthing braids to: ◾ Gland plates M8 10 set(s) 2570.200 Fast assembly thanks to self-tapping screws 644 Contact washers Size Packs of Model No. Serrated contact washers facilitate secure PE conductor connection. As a result, there is no need to manually strip paint in the connection area. M5 100 pc(s). 2343.000 M6 100 pc(s). 2334.000 M8 100 pc(s). 2335.000 Rittal Catalogue 34/System accessories Interior installation Earthing Earthing plate Packs of Model No. For installation in ◾ Comfort Panel ◾ Optipanel ◾ TS ◾ SE ◾ PC 1 pc(s). 2570.500 Supply includes: – Assembly parts One earthing cable can be screw-fastened to the threaded bolt and connected to up to 8 components with earth straps via 6.3 mm flat-pin connectors. Central earthing point Packs of Model No. For connecting ◾ Earth straps ◾ Earthing braids to the vertical and horizontal enclosure profile. The connection bracket is connected to the enclosure frame with 2 screws and is securely contacted. Earth connection is carried out via the threaded bolt M8 x 20 mm. 1 pc(s). 7829.200 Material: – Sheet steel Supply includes: – 1 connection bracket – 2 assembly screws for mounting on the enclosure section – 2 serrated washers – 1 nut M8 – 1 contact lock washer M8 – 1 washer Surface finish: – Zinc-plated Potential equalisation star Packs of Model No. for 8 mm earthing bolt The earthing connector is used for simple potential equalisation on an 8 mm earthing bolt, or in conjunction with central earthing point 7829.200. Up to five flat-pin connectors (6.3 mm) may be contacted on one earthing point. 10 pc(s). 7548.210 Complete earthing kit for upgrading existing DK-TS applications To DIN EN 60 950/VDE 0805, Ø 4 mm2. For system-compatible earthing of all enclosure parts on the enclosure frame. The earth conductors are pre-assembled ready for connection with connectors and cut to the correct length. Extension kit for complete earthing kit for upgrading existing DK-TS applications To DIN EN 60 950/VDE 0805, Ø 4 mm2. To extend the complete earthing kit 7829.150, in order to keep additional components potential-free. Conductor length 300 mm in each case. For 6.3 mm flat-pin connectors, 8 mm earthing bolts or for attachment with contact washers and screw. Rittal Catalogue 34/System accessories Supply includes: – 10 earthing connectors – Assembly parts Packs of Model No. 1 set(s) 7829.150 Supply includes: – 8 earth straps – Central earthing point and assembly parts Packs of Model No. 1 set(s) 7829.152 Supply includes: – 5 earth straps – Assembly parts and identification labels 645 Interior installation Earthing Earthing kit KE Packs of Model No. For producing the required external potential equalisation for spray-finished enclosures in the following series: ◾ KL ◾ AE ◾ TS For applications in Unit Group II, Category 3, in compliance with Directive 94/9 EU-Appendix VIII, internal production control. 5 pc(s). 9214.000 Earthing kit Packs of Model No. 5 pc(s). 2570.100 PE busbar Packs of Model No. 699 mm long PE busbar with 42 pre-fitted screws, including terminal clamps up to 6 mm2 (fine-wire conductors), 10 mm2 (single wire or multi-wire conductors) and main terminal clamp up to 35 mm2. 1 pc(s). 2364.000 for KL Consisting of all the screws, nuts, contact washers and earth strap needed to earth the cover; length 250 mm, cross-section 4 mm2. Accessories: – Cable retainer, see page 623 Earth rail, horizontal for TS Length mm Packs of Model No. 450 1 pc(s). 7113.000 Supply includes: – Earth rail made from E-Cu 57 to DIN EN 12 163, DIN EN 13 601, 15 x 5 mm – 20 connection points with M5 screws – 2 earth connections 25 mm2 – 2 isolators – Assembly parts 646 Rittal Catalogue 34/System accessories Interior installation Earthing Earthing kit, pre-assembled for TS, TS-IT For star earthing. With the pre-assembled earth conductors on a potential equalisation rail, star potential equalisation is easily integrated into network enclosures. For TS enclosures up to W x H x D mm Packs of Model No. 800 x 2000 x 800 1 set(s) 7829.100 800 x 2200 x 1200 1 set(s) 7829.110 Supply includes: – Earth rail made from E-Cu 57 to DIN EN 12 163, DIN EN 13 601 – 16 earthing leads 6 mm2 – 2 isolators – Assembly parts Earth rail, vertical for TS Easily fitted to the 25 mm DIN pitch pattern of distributors or to the 482.6 mm (19˝) mounting angles. The supplied earth conductors facilitate star earthing of the cable clamp straps in the patch panels. The earth terminals are fully adjustable. Current carrying capacity of rail approx. 200 A. Supply includes: – Earth rail made from E-Cu 57 to DIN EN 12 163, DIN EN 13 601, 15 x 5 mm – 16 conductor connection clamps 2.5 – 16 mm2 – 15 earthing leads 6 mm2, L = 500 mm – Assembly parts For enclosure height mm Length mm Packs of Model No. 800 600 1 set(s) 7541.000 1000 800 1 set(s) 7542.000 1200 1000 1 set(s) 7543.000 1400 1200 1 set(s) 7544.000 1600 1400 1 set(s) 7545.000 1800 1600 1 set(s) 7546.000 2000 1800 1 set(s) 7547.000 2200 2000 1 set(s) 7548.000 Extension kit Packs of Model No. for earth rail, vertical For system-compatible expansion of the star earthing on the vertical potential equalisation rail. 10 pc(s). 7549.000 ESD connection point Packs of Model No. Dangerously high potential differences can occur during maintenance or conversion work on the enclosure. To protect sensitive electronic components, this standardised connection point (pushbutton) provides potential equalisation. The connection point is directly conductively connected to the enclosure frame via two screws. 1 pc(s). 7752.950 Supply includes: – Earthing leads 6 mm2, L = 500 mm – Preassembled, with ring terminal and wire end ferrule – Earth terminals, 2.5 – 16 mm2 – Assembly parts Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Rittal Catalogue 34/System accessories 647 Interior installation Earthing Busbars E-Cu Technical details: Available on the Internet with integral holes Suitable for ◾ Direct installation in enclosures ◾ Busbar supports – 9340.000/.010, see page 212 – 9340.004, see page 212 – 3052.000, see page 278 – 3073.000, see page 278 ◾ PE/PEN combinations in conjunction with PE/PEN combination angles, see page 649 and baying bracket E-Cu, see page 649 Size 30 x 5 mm (hole Ø 11 mm) For enclosure width mm Length mm Packs of Model No. 400 365 2 pc(s). 9661.345 600 565 2 pc(s). 9661.365 800 765 2 pc(s). 9661.385 1000 965 2 pc(s). 9661.305 1200 1165 2 pc(s). 9661.325 95 4 pc(s). 9661.355 649 – 4 pc(s). 9661.235 649 Length mm Packs of Model No. Page 400 365 2 pc(s). 9661.340 600 565 2 pc(s). 9661.360 800 765 2 pc(s). 9661.380 1000 965 2 pc(s). 9661.300 1200 1165 2 pc(s). 9661.320 95 4 pc(s). 9661.350 649 – 4 pc(s). 9661.230 649 Length mm Packs of Model No. Page 400 392 2 pc(s). 9661.040 600 592 2 pc(s). 9661.060 800 792 2 pc(s). 9661.080 1000 992 2 pc(s). 9661.000 1200 1192 2 pc(s). 9661.020 Page Accessories Baying bracket E-Cu PE/PEN combination angle Size 30 x 10 mm (hole Ø 11 mm) For enclosure width mm Accessories Baying bracket E-Cu PE/PEN combination angle Size 40 x 10 mm (hole Ø 14 mm) For enclosure width mm Accessories Baying bracket E-Cu 88 4 pc(s). 9661.050 649 PE/PEN combination angles for use with Form 2-4 – 4 pc(s). 9661.240 649 PE/PEN combination angles for other applications – 4 pc(s). 9661.200 649 Length mm Packs of Model No. Page 400 392 2 pc(s). 9661.140 600 592 2 pc(s). 9661.160 800 792 2 pc(s). 9661.180 1000 992 2 pc(s). 9661.100 1200 1192 2 pc(s). 9661.120 Size 80 x 10 mm (hole Ø 14 mm) For enclosure width mm Accessories Baying bracket E-Cu 648 88 4 pc(s). 9661.150 649 PE/PEN combination angles for use with Form 2-4 – 4 pc(s). 9661.240 649 PE/PEN combination angles for other applications – 4 pc(s). 9661.200 649 Rittal Catalogue 34/System accessories Interior installation Earthing Inserted screw nuts M12 Packs of Model No. Self-holding nuts with knurled ring for busbars E-Cu. 30 pc(s). 3591.060 Hole diameter: 14.5 mm PE/PEN combination angle E-Cu Tested short-circuit resistance – PE/PEN combination 30 x 5 mm: Icw 18 kA, 1 sec. – PE/PEN combination 30 x 10 mm: Icw 30 kA, 1 sec. – PE/PEN combination 40/80 x 10 mm: Icw 60 kA, 1 sec. for PE/PEN combinations The PE/PEN combination, comprising busbars, combination angles and baying brackets, supports type-tested configurations as per IEC 61 439-1. The pre-assembled combination angles, baying brackets and busbars customised to match the enclosure width mean a significant reduction in assembly time and costs. Material: – E-Cu Supply includes: – Assembly parts Application Form 2-4 Others Size mm Packs of Model No. 30 x 5 ◾ ◾ 30 x 5 4 pc(s). 9661.235 30 x 10 ◾ ◾ 30 x 10 4 pc(s). 40 x 10 and ◾ – 40 x 10 4 pc(s). 80 x 10 – ◾ 40 x 10 4 pc(s). For busbars mm 1 9661.230 9661.240 9661.200 Baying bracket E-Cu For busbars mm Length mm Packs of Model No. 30 x 5 95 4 pc(s). 9661.355 30 x 10 95 4 pc(s). 9661.350 40 x 10 88 4 pc(s). 9661.050 80 x 10 88 4 pc(s). 9661.150 Rittal Catalogue 34/System accessories 649 Cable management Cable entry Cable entry plates for ◾ Cable entry grommets ◾ Connector grommets instead of segments of the standard divided gland plates For installation in TS, SE and PC enclosures Enclosure width mm Cut-outs per plate Packs of Model No. 600 5 2 pc(s). 8800.060 800 8 2 pc(s). 8800.080 1000 4 4 pc(s). 8800.100 1200 6 4 pc(s). 8800.120 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts For installation in CM enclosures and TP TopConsole system Enclosure width mm Cut-outs per plate Packs of Model No. 600 5 1 pc(s). 5001.226 800 8 1 pc(s). 5001.227 1000 4 1 pc(s). 5001.228 1200 6 1 pc(s). 5001.229 1600 8 1 pc(s). 5001.237 For installation in TS, SE, PC and TP universal console Enclosure width mm Cut-outs per plate Packs of1) Model No. 600 5 2 pc(s). 4320.700 800 8 2 pc(s). 4321.700 1000 10 2 pc(s). 4323.700 1) Incl. compensating plate Accessories: – Cable entry grommets, see page 651 Three examples from a wide range of possibilities The diagrams show three TS examples for the positioning of cable entry plates instead of segments of the three-piece gland plates supplied as standard. This facilitates positioning to fit the mounting plate. Thanks to the enclosure symmetry, where dimensions permit, cable entry plates may also be inserted in the enclosure depth, right and left, analogous to the gland plates. 650 Rittal Catalogue 34/System accessories Cable management Cable entry Cable entry grommets In conjunction with the cable entry plate, simple and fast sealing of cables inserted in the base area of enclosures. Material: – Body: Polypropylene – Cover: Thermoplastic elastomer Cables per grommet Max. Ø mm Packs of Model No. 8 13 25 pc(s). 4316.000 3 21 25 pc(s). 4317.000 1 47 25 pc(s). 4318.000 Protection category IP to IEC 60 529: – IP 55 if installed correctly Connector grommets Packs of Model No. Suitable for cable diameters from 8 to 36 mm. 10 pc(s). 4311.000 Material: – Outer cover: Polypropylene covered with thermoplastic elastomer – Seal: Cellular rubber Protection category IP to IEC 60 529: – IP 55 if installed correctly Section for cable entry, centre for TS, SE, CM, TP For top-mounting on gland plates. A superior alternative to the foam rubber cable clamp strip, thanks to: ◾ Easier mounting ◾ Full-surface support ◾ High level of sealing of cables inserted into the enclosure Material: – Extruded aluminium section – Seal: PU foam – Cross-section: 30 x 25 mm Protection category IP to IEC 60 529: – IP 55 if installed correctly Packs of Model No. 600 1 set(s) 8802.060 800 1 set(s) 8802.080 1000 2 set(s) 8802.100 1200 2 set(s) 8802.120 1600 2 set(s) 8802.160 Accessories: – Cable clamp rail (right angle section), see page 665 – C rail 30/15, see page 612 24.5 Y 129.5 30 x 25 25.5 5 Note: – 1 set is sufficient for one base opening up to an enclosure width of 800 mm. From an enclosure width of 1000 mm, two base openings are provided. – 2 sets per enclosure may be fitted For enclosure width mm Y = Mounting plate depth-adjustable on a 25 mm pitch pattern (final pitch 30 mm) Rittal Catalogue 34/System accessories 651 Cable management Cable entry Section for cable entry, rear for TS, SE, CM, TP Unlike the section for cable entry, centre, the rear section is mounted directly onto the base opening. In this way, when installing the mounting plate in the rearmost position (TS) or with CM, the cables may be routed directly on a cable clamping rail with no large radii. In conjunction with the cable clamp rail, optimum adjustment between the cable entry and mounting plate can be achieved. Material: – Extruded aluminium section – Seal: PU foam – Cross-section: 30 x 25 mm For enclosure width mm Packs of Model No. 600 1 set(s) 8802.065 800 1 set(s) 8802.085 1000 2 set(s) 8802.105 1200 2 set(s) 8802.125 1600 2 set(s) 8802.165 Accessories: – Cable clamp rail, see page 665 Protection category IP to IEC 60 529: – IP 55 if installed correctly Note: – 1 set is sufficient for one base opening up to an enclosure width of 800 mm. From an enclosure width of 1000 mm, two base openings are provided. – 2 sets per enclosure may be fitted Foam rubber cable clamp strip Packs of Model No. For sealing the cable entry between the gland plates. Particularly suitable for identical cable crosssections. 3m 2573.000 Material: – PU foam – Cross-section: 30 x 30 mm Protection category IP to IEC 60 529: – IP 55 if installed correctly EMC gland plates see page 641 652 Rittal Catalogue 34/System accessories Cable management Gland plates Plastic cable gland plates Size Packs of Model No. with metric knockouts With pre-punched holes for cable glands. Used for sealing standard gland plates. 1 10 pc(s). 2560.010 3 10 pc(s). 2561.010 4 5 pc(s). 2562.010 Temperature range: – Suitable for use from -40°C…+70°C 5 5 pc(s). 2563.010 Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 55 if installed correctly Note: – The applicable size may be taken from the respective product ordering page Size 1 Size 3 330 160 45 M16 120 90 M20 M25 75 56 70 M12 120 7.5 110 7 25 M32 M40 Size 4 M50 Size 5 530 339 45 110 with PG knockouts With pre-punched PG holes for cable glands. Used for sealing standard gland plates. Size 2 Temperature range: – Suitable for use from -40°C…+70°C PG Qty. Packs of Model No. 13.5 12 5 pc(s). 1581.000 13.5 16 21 6 2 2 5 pc(s). 1582.000 1581.000 Material: – ABS 220 202 Colour: – RAL 7035 Ø5 90 72 PG 13.5 76 149 149 133 Plastic cable gland plates Protection category IP to IEC 60 529: – IP 55 if installed correctly 110 110 110 8 120 133 120 8 49.5 Note: – The applicable size may be taken from the respective product ordering page 1582.000 PG 13.5 PG 13.5 Rittal Catalogue 34/System accessories PG 21 PG 13.5 PG 16 PG 16 PG 13.5 PG 21 PG 13.5 PG 13.5 653 Cable management Gland plates Plastic gland plates with membranes Simply pierce the plastic with a sharp object, and pull through the cable. Size Packs of Model No. 3 1 pc(s). 2561.500 4 1 pc(s). 2562.500 5 1 pc(s). 2563.500 Material: – Plastic to UL 94-V0 Diameter mm Colour: – Similar to RAL 7035 Protection category IP to IEC 60 529: – IP 65 with careful cable entry Note: – The applicable size may be taken from the respective product ordering page Size 3 330 45 120 120 90 75 Ø6 Number of cable entries for Model No. 2561.500 2562.500 2563.500 5–9 – – 18 6 – 11 17 – – 7 – 12 – 24 16 10 – 15 27 48 36 15 – 21 2 4 – 15 – 24 – – 6 15 – 25 – 8 – 16 – 25 4 – – 19 – 34 2 – – 23 – 30 – – 2 26 – 35 – 4 2 26 – 54 – – 4 50 – 110 – – 1 7.5 Size 4 Size 5 339 120 534 120 47 Ø6 654 110 110 110 133 149 Ø6 133 8 110 149 49.5 8 Rittal Catalogue 34/System accessories Cable management Gland plates Metal gland plates Size Packs of Model No. with metric knockouts Simply knock out the holes for the cable glands using a screwdriver. 2 1 pc(s). 1581.100 3 1 pc(s). 2561.100 4 1 pc(s). 2562.100 Material: – Sheet steel 5 1 pc(s). 2563.100 Colour: – RAL 7035 Number of cable entries Protection category IP to IEC 60 529: – IP 66 when mounting in the usual position at the bottom Note: – The applicable size may be taken from the respective product ordering page Model No. Diameter M12 M16 M20 M25 M32 – – 12 – – – 1581.100 – – 9 4 2 – 2561.100 – 2 5 13 2 2 2562.100 1 – 12 11 8 4 2563.100 Size 2 M40 221 9.5 101 9 7 72 76 101 90 Accessories: – Cable glands made from polyamide or brass, see page 658 Size 3 330 120 120 75 90 7.5 45 315 7.5 Size 5 Size 4 339 534 120 120 47 110 110 110 8 110 8 323 Rittal Catalogue 34/System accessories 133 149 133 149 8 49.5 8 518 655 Cable management Gland plates Metal gland plates Size Design Packs of Model No. As spare/replacement part for the standard gland plates supplied loose. 1 Solid 1 pc(s). 2560.400 2 Solid 6 pc(s). 1158.500 Material: – Sheet steel 3 Solid 1 pc(s). 2561.400 4 Solid 1 pc(s). 2562.400 Colour: – RAL 7035 5 Solid 1 pc(s). 2563.150 Protection category IP to IEC 60 529: – IP 66 when mounting in the usual position at the bottom Note: – The applicable size may be taken from the respective product ordering page Accessories: – Cable glands made from polyamide or brass, see page 658 2563.150 2560.400 500 149 113 70 534 133 43 160 1 1 2561.400 330 1158.500 303 220 62 1 2562.400 90 90 63 192 R9 339 303 149 113 Area available for population 1 Gland plate Packs of Model No. for metric cable glands, for EL Folded gland plate with foamed-in seal and prepunched, knock-out holes for metric cable glands M12, M20, M25, M32, M40. 1 pc(s). 7705.235 19 599 Material: – Sheet steel, 1.5 mm 656 12.5 (4 x) 32.5 (2 x) 28 27 Protection category IP to IEC 60 529: – IP 55 20.5 (7 x) 133.5 Colour: – RAL 7035 40.5 (2 x) 25.5 (5 x) Rittal Catalogue 34/System accessories Cable management Gland plates Packs of Model No. with brush insert, for EL Folded gland plate with foamed-in seal and plastic brush inserts for simple cable entry. 1 pc(s). 7705.035 Colour: – RAL 7035 40 Material: – Sheet steel, 1.5 mm 133.5 Gland plate 390 19 599 Brush strip For individual installation of enclosure panels, gland plates and panels. Cut-outs for cable routing at any given positions in the side panel, rear panel, doors, roof and base plate may be finished off attractively by simply attaching the brush strip. Packs of Model No. 2m 7072.200 Technical specifications: – For metal thickness: 0.6 – 1.5 mm – Bristle length: 30 mm – Plastic sheathing: 18 mm – Snap-on surface: 10 mm – Maximum cut-out height: 38 mm Brush strip, super-airtight Packs of Model No. For individual installation of enclosure panels, gland plates and panels. Cut-outs for cable routing at any position in the side panel, rear panel, doors, roof and base plate. These special brush strips may be used to create airtight entries for cable sections and conductors. The brush strips arranged in an offset configuration ensure good sealing from the routed cables even with large quantities of cables. In this way, unwanted flow losses may be reduced to a minimum. 2x1m 7825.375 Technical specifications: – For metal thickness: 1.5 – 2 mm – Bristle length: 58 mm – Plastic sheathing: 14 mm – Snap-on surface: 11.5 mm – Cut-out width: 88 – 90 mm Material: – Plastic, UL 94-V0 Supply includes: – Each 1 brush strip, 1 m in length, right-hand and left-hand version Rittal Catalogue 34/System accessories 657 Cable management Cable gland Cable gland, brass Benefits: ◾ Because the gland and lock nut are sold together in a single pack, this saves additional ordering and storage ◾ Clamping membranes for even tightening and strain relief which protects the cables Material: – Brass – Seal: TPE/NBR Surface finish: – Nickel-plated Protection category IP to IEC 60 529: – IP 68 (1 bar, 30 min.) Approval: – VDE tested to EN 50 262 Cable gland, polyamide Benefits: ◾ Because the gland and lock nut are sold together in a single pack, this saves additional ordering and storage ◾ Clamping membranes for even tightening and strain relief which protects the cables Material: – Polyamide 6 – Seal: Neoprene Colour: – RAL 7035 Size Cable diameter Packs of mm Model No. M12 x 1.5 3–7 15 pc(s). 2411.800 M16 x 1.5 4.5 – 10 15 pc(s). 2411.810 M20 x 1.5 7 – 13 10 pc(s). 2411.820 M25 x 1.5 10 – 17 10 pc(s). 2411.830 M32 x 1.5 13 – 21 5 pc(s). 2411.840 M40 x 1.5 19 – 28 4 pc(s). 2411.850 M50 x 1.5 25 – 35 2 pc(s). 2411.860 M63 x 1.5 35 – 48 1 pc(s). 2411.870 Possible alternative: – Hygienic Design cable gland, see page 659 Size Cable diameter Packs of mm Model No. M12 x 1.5 2.5 – 6.5 50 pc(s). 2411.600 M16 x 1.5 4.5 – 10 50 pc(s). 2411.610 M20 x 1.5 7 – 13 50 pc(s). 2411.620 M25 x 1.5 10 – 17 25 pc(s). 2411.630 M32 x 1.5 17 – 25 15 pc(s). 2411.640 M40 x 1.5 22 – 33 5 pc(s). 2411.650 M50 x 1.5 28 – 38 5 pc(s). 2411.660 M63 x 1.5 32 – 44 3 pc(s). 2411.670 Protection category IP to IEC 60 529: – IP 68 (1 bar, 30 min.) Approval: – VDE tested to EN 50 262 658 Rittal Catalogue 34/System accessories Cable management Cable gland Standard version Cable gland HD Applications: ◾ Manufacturing and packaging of foodstuffs etc. ◾ Clean room technology (e.g. pharmaceuticals) ◾ Biotechnology ◾ Chemical industry Benefits: ◾ Smooth, solid exterior surfaces effectively prevent the depositing of harmful micro-organisms ◾ Much easier, and therefore cheaper to clean compared with conventional cable glands Material: – Cap nut: Stainless steel 1.4305 (AISI 303) – Seal: Conforms to FDA 21 CFR 177.2600 Size Cable diameter mm M12 x 1.5 M16 x 1.5 Packs of Model No. 3 – 6.5 5 pc(s). 2410.000 5 – 10 5 pc(s). 2410.010 M20 x 1.5 6 – 12 5 pc(s). 2410.020 M25 x 1.5 12 – 17 5 pc(s). 2410.030 Size Cable diameter mm Packs of Model No. M16 x 1.5 5 – 10 5 pc(s). 2410.110 1 M20 x 1.5 6 – 12 5 pc(s). 2410.120 2 M25 x 1.5 12 – 17 5 pc(s). 2410.130 EMC version 3 Protection category IP to IEC 60 529: – IP 68 (5 bar, 30 min.) 4 5 Protection category IP to DIN 40 050-9: – IP 69K 6 7 Why hygiene-compatible cable glands? Critical points with conventional solutions Cable entry in front Hygiene-compatible design features 1 1 2 of seal 2 No minimum radii on the hexagon External thread Gap caused by O-ring on the enclosure surface cable entry Compliance with minimum radii on the hexagon 3 3 4 4 Stainless steel lock nut Seal directly at the No external threads Flush termination Size Packs of Model No. M12 x 1.5 10 pc(s). 2410.200 Material: – Stainless steel 1.4305 (AISI 303) M16 x 1.5 10 pc(s). 2410.210 M20 x 1.5 10 pc(s). 2410.220 M25 x 1.5 10 pc(s). 2410.230 for HD cable gland For attaching HD cable glands in an internal thread or using lock nuts. This can be achieved either from the inside or from the outside using an Allen key. EMC version only Clamping ring Enclosure seal Base with locator for assembly tool between the cap nut and the enclosure To match HD cable glands. Assembly tool Seal Cap nut Clamping jaws Shield spring Packs of Model No. 1 set(s) 2410.290 Supply includes: – 1 set = Adaptor for sizes from M12 – M25 Rittal Catalogue 34/System accessories 659 Cable management Cable gland Connector gland Packs of Model No. 1 set(s) 2400.000 Cable gland Packs of Model No. for IW worktops To fit drilled holes Ø 60 mm. For the entry of cables with pre-assembled connectors, the rotating flap and cover are easily removed. 1 pc(s). 6902.770 for connector cut-outs (24-pole) For the entry of 2 pre-assembled cables in the connector cut-out, without dismantling the connector. Cable diameter: 8 – 36 mm Material: – Enclosure: Plastic – Clamps: Sheet steel Surface finish: – Clamps: Zinc-plated Supply includes: – 1 set = 2 half-shells, including seals, with fastening clamp Technical details: Available on the Internet Material: – Plastic Colour: – RAL 7035 Edge protector For covering sharp edges of cut-outs. Provides protection from injuries and prevents damage to inserted cables. The edge protector is suitable for material thicknesses ranging from approximately 1.0 – 2.0 mm and may be cut to the required length. Packs of Model No. 10 m 7072.100 Material: – Plastic PVC Colour: – Black 660 Rittal Catalogue 34/System accessories Cable management Cable gland The connector gland proves that sometimes "less is more": significantly faster installation, a flexible sealing system for different cable diameters, and simple cable entry with pre-assembled cables. Low installation costs, a high degree of protection and flexible cable management – added value guaranteed with the latest generation of cable entry solutions from Rittal. Benefits: ◾ Cable diameters 4 – 16 mm ◾ Simple cable entry for pre-assembled cables ◾ Individual cables can be added or replaced without dismantling the sealing frame ◾ Sealing modules remain safely attached to their cables Sealing frame For pre-assembled cables with connectors. Mounting over 24-pole or 16-pole connector cut-outs in ◾ Module plates for TS divider panels ◾ Metal gland plates Material: – Frame: Polyamide – Flat seal: CR For modules 20 x 20 mm For cut-out Packs of Model No. 10 pc(s). 24-pole 1 pc(s). 2400.900 8 pc(s). 16-pole 1 pc(s). 2400.910 Accessories: – Module plates for TS divider panel, see from page 538 130 112 86 NEMA protection category: – NEMA 12 103 Protection category IP to IEC 60 529: – IP 64 36 36 Supply includes: – Assembly parts M4 32 M4 32 16-pole Sealing modules To seal cables in conjunction with a sealing frame. It is possible to combine 20 x 20 mm and 40 x 40 mm sealing modules. Material: – Hard shell: Polyamide – Seal: TPE 2 Protection category IP to IEC 60 529: – IP 64 NEMA protection category: – NEMA 12 Rittal Catalogue 34/System accessories 24-pole Sealing modules 20 x 20 mm Sealing range Packs of Model No. 4 – 6 mm 10 pc(s). 2400.920 6 – 9 mm 10 pc(s). 2400.930 Solid 10 pc(s). 2400.970 Sealing modules 40 x 40 mm Sealing range Packs of Model No. 9 – 12 mm 10 pc(s). 2400.940 12 – 16 mm 10 pc(s). 2400.950 Solid 10 pc(s). 2400.960 661 Cable management Cable gland Connector gland, small For pre-assembled cables with connectors. ◾ For use with material thickness of up to 4 mm ◾ Strain relief of the pre-assembled cables can be achieved with cable ties To fit Packs of Model No. 2 cables Ø 6 – 8 mm 1 pc(s). 2400.300 3 cables Ø 4 – 6 mm 5 pc(s). 2400.500 Material: – Plastic Colour: – RAL 9005 Protection category IP to IEC 60 529: – IP 65 if installed correctly Supply includes: – Assembly parts 36 55 55 11 8 6 35 21.5 Ø 35 Ø 2400.300 3 25 2400.500 41.5 41.5 4 4 22 Mounting cut-out 42 Cable gland module Packs of Model No. for support arm connection Ø 130 mm Use of the mounting cut-out for support arm connection Ø 130 mm, round, with enclosures mounted on the wall, for sealed cable entry. May also be mounted retrospectively with the cables already inserted. Fitted with T-heads for cable clamping. Particularly well-suited to cables with identical cross-sections. 1 pc(s). 6052.500 10 – 39 100 Ø 82 35 100 – 134 Material: – Sheet steel 120 25 70 Surface finish: – Zinc-plated 38.5 Supply includes: – Assembly parts 66 Stepped collar for wall thicknesses from 1.5 to 4.5 mm For cable entry, simply cut off at the required level to match the cable diameter. Material: – Plastic to UL 94-HB Sealing range mm Packs of Model No. M20 5 – 16 100 pc(s). 2899.200 M25 5 – 21 50 pc(s). 2899.250 M32 13 – 26.5 25 pc(s). 2899.320 M40 13 – 34 20 pc(s). 2899.400 For hole Protection category IP to IEC 60 529: – IP 54 with careful cable entry 662 Rittal Catalogue 34/System accessories Cable management Cable duct for vertical TS section Width mm Height mm Packs of Model No. 50 1600 8 set(s) 8800.570 50 1800 8 set(s) 8800.520 100 1600 4 set(s) 8800.540 100 1800 4 set(s) 8800.510 For direct mounting on the vertical enclosure section. Width 50 mm For assembly on a vertical enclosure section in the area of the side panel. Width 100 mm For assembly on two bayed enclosure sections in the baying area. Baying brackets and baying clamps which have already been fitted can be covered over with the cable duct. The nominal break points of the bars are also designed for combination with the cable ducts for mounting plates; in addition a further nominal break at the level of the mounting plate enables direct insertion into the cable duct. The cable duct fastening points are co-ordinated with the TS system hole pattern; time-consuming drilling work, as in the case of DIN ducts, is eliminated. Technical specifications: – Depth: 80 mm – Length: 1600 mm (for enclosure height 1800 mm) 1800 mm (for enclosure height 2000 mm) Can be shortened for other enclosure sizes – Bar width: 5.5 mm – Slot width: 4.5 mm Material: – Hard PVC – Flame-resistant, self-extinguishing – Temperature resistant to +60°C Colour: – Similar to RAL 7030 Supply includes: – 1 set = 1 cable duct with cover Accessories: – Aluminium rivet for attachment, see page 664 72 2 71 1 5.5 100 5.5 48 4.5 4.5 5 6.5 Rittal Catalogue 34/System accessories 25 50 14 6.5 8 1600/1800 1550 = 62 x 25/1750 = 70 x 25 8 14 50 25 1600/1800 1550 = 62 x 25/1750 = 70 x 25 8800.570/8800.520 8800.540/8800.510 5 663 Cable management Cable duct For enclosure width mm Length (L) mm for mounting plate ◾ To fit the cable ducts for the vertical TS section ◾ If the TS mounting plate is installed in the rearmost position, the horizontally mounted cable ducts are flush with the vertical ones ◾ For external mounting on surfaces Technical specifications: – Depth: 80 mm – Length: 2000 mm, may be cut to length – Bar width: 5.5 mm – Slot width: 4.5 mm Material: – Hard PVC – Flame-resistant, self-extinguishing – Temperature resistant to +60°C Fixed length 2000 mm Width (B) mm Packs of Model No. 30 24 set(s) 8800.750 40 20 set(s) 8800.751 60 18 set(s) 8800.752 80 12 set(s) 8800.753 100 12 set(s) 8800.754 Colour: – Similar to RAL 7030 Supply includes: – 1 set = 1 cable duct with cover Accessories: – Aluminium rivet for attachment, see page 664 Width 30, 40 and 60 mm 50 25 80 6.5 4.5 B 25 14 8 L 8 25 80 B 14 4.5 6.5 50 Width 80 and 100 mm 25 50 L Aluminium rivet Packs of Model No. For secure assembly of cable ducts in conformity with the relevant standards. Also suitable for mounting support rails and punched rails. 100 pc(s). 8800.531 To fit ◾ TS system punchings ◾ Drilled hole Ø 4.5 mm 664 Accessories: – Cable ducts for vertical TS section, see page 663 – Cable ducts for mounting plate, see page 664 Rittal Catalogue 34/System accessories Cable management Cable clamp rails Right angle section for TS, SE, PC, TP universal console, TS base/plinth, Flex-Block For strain relief with cable entry. Depth-variable mounting on a 25 mm pitch pattern of holes on the horizontal enclosure section or in the TS base/ plinth/Flex-Block. Enclosure width mm Length mm Packs of Model No. 400 385 2 pc(s). 4193.000 600 585 2 pc(s). 4191.000 800 785 2 pc(s). 4192.000 1000 985 2 pc(s). 4336.000 1200 1185 2 pc(s). 4196.000 1600 1585 2 pc(s). 4338.000 1800 1785 2 pc(s). 4339.000 Material: – Steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Accessories: – Fastening bolts for TS base/plinth, see page 516 – Quick-assembly block 4133.000 for Flex-Block, see page 621 – Punched rails 23 x 23 mm for Flex-Block, see page 611 Cable clamps For cable diameter mm for cable clamp rails For fastening the cables to the cable clamp rails. Packs of Model No. 6 – 12 25 pc(s). 2350.000 Material: – Sheet steel 12 – 16 25 pc(s). 2351.000 14 – 18 25 pc(s). 2352.000 Surface finish: – Zinc-plated 18 – 22 25 pc(s). 2353.000 22 – 26 25 pc(s). 2354.000 Supply includes: – Plastic insert 26 – 30 25 pc(s). 2355.000 30 – 34 25 pc(s). 2356.000 34 – 38 25 pc(s). 2357.000 38 – 42 25 pc(s). 2358.000 42 – 46 25 pc(s). 2359.000 46 – 50 25 pc(s). 2360.000 Possible alternative: – Rail for EMC shielding bracket and strain relief, see page 641 Cable clamp rails C-section, for mounting plates for TS, SE, CM, TP For strain relief with cable entry. The length of the cable clamp rail is tailored to the width of the mounting plate. The mounting bracket included with the supply supports three different installation situations on the mounting plate: For enclosure width mm Length mm Packs of Model No. 600 499 1 pc(s). 5001.080 800 699 1 pc(s). 5001.081 1000 899 1 pc(s). 5001.082 1200 1099 1 pc(s). 5001.083 straight, at a distance of 23 mm from the mounting plate straight, at a distance of 10 mm from the mounting plate Accessories: – Cable clamps for C rails, see page 666 tilted, towards the mounting plate Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Two mounting brackets and assembly screws Rittal Catalogue 34/System accessories 665 Cable management Cable clamping bracket For installation in command panels with mounting cut-out ▭ 120 x 65 mm and Ø 130 mm. Cable clamping optionally via: ◾ Cable clamps or ◾ Cable ties SZ 2597.000 ◾ Standard commercially available cable ties Packs of Model No. 1 set(s) 6052.000 Accessories: – Cable clamps, see page 666 – Cable ties, see page 667 Bracket height = 25 mm with fitted C rail 40 mm Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – C rail and assembly screws Cable clamps For cable diameter mm for C rails For attaching the cables to the C rails. Packs of Model No. 6 – 14 25 pc(s). 7077.000 Material: – Sheet steel 12 – 18 25 pc(s). 7078.000 18 – 22 25 pc(s). 7097.000 Surface finish: – Zinc-plated 22 – 26 25 pc(s). 7097.220 26 – 30 25 pc(s). 7097.260 Supply includes: – Plastic insert 30 – 34 25 pc(s). 7097.300 34 – 38 25 pc(s). 7097.340 38 – 42 25 pc(s). 7098.000 42 – 56 25 pc(s). 7098.100 56 – 64 25 pc(s). 7099.000 Accessories: – C rails, see from page 612 Cable conduit and cable conduit holder Cable conduit For secure cable routing e.g. from the enclosure or mounting plate to the door. Attachment facility for standard commercially available cable ties is provided on the cable conduit holder, so that cables may be attached upon entry to/exit from the cable conduit. Material: – Cable conduit: Polythene – Cable conduit holder: Polyamide Packs of Model No. 16 25 m 2595.000 29 25 m 2589.000 36 25 m 2596.000 48 25 m 2590.000 For cable conduit Ø mm Packs of Model No. 16 20 pc(s). 2593.0001) 29 20 pc(s). 2591.0001) 36 20 pc(s). 2594.000 48 20 pc(s). 2592.000 Cable conduit holder 1) 666 Internal Ø mm Installation in compact enclosures AE with universal bracket 2373.000, see page 623 Rittal Catalogue 34/System accessories Cable management Cable attachment For professional, secure fastening of cables and conduits. For fastening: ◾ Slide into the mounting rail 23 x 23 mm ◾ Screw-fasten onto the round punchings of the enclosures, as well as all punched rails and punched sections For cable diameter from – to mm Packs of Model No. 6–9 50 pc(s). 4319.090 9 – 12 50 pc(s). 4319.120 12 – 16 50 pc(s). 4319.160 16 – 20 50 pc(s). 4319.200 Material: – Polyamide Note: – As the attachments are bayable, several attachments, even those of different sizes, can be assembled using just 2 screws Also required: – Posidrive raised countersunk screw M5 x 12 mm, 2488.000, for screw-fastening to the round system punchings, see page 625 Accessories: – Punched rail 23 x 23 mm, see page 611 Cable ties The super-fast solution for fastening cables to the enclosure profile or mounting system parts. Simply clip into the round system punchings. Nylon loop With the nylon loop, secured cables are easily released, allowing individual cables to be added or removed. Ideal for sensitive data cables (fibreoptic/Cu), as it avoids indentations on the cable sheathing. In addition, the nylon loop may be screw-fastened to the round system punchings or attached using a quick-release fastener. Colour: – Black Supply includes: – Quick-release fasteners Nylon loop tape For tidy cable routing. Supplied on a reel for cutting to the required length. Length mm Packs of Model No. 150 100 pc(s). 2597.000 Width mm Length mm Max. cable diameter mm Packs of Model No. 20 130 30 10 pc(s). 7072.220 20 200 50 10 pc(s). 7072.230 20 300 90 10 pc(s). 7072.240 Also required: – Screw 2486.500 for screw-fastening to the round system punchings, see page 625 Length mm Width mm Packs of Model No. 5000 16 1 pc(s). 2203.400 Unlike cable ties, nylon loop tape ◾ protects the cable sheathing ◾ is easily reopened and ◾ is reusable Rittal Catalogue 34/System accessories 667 Cable management Nylon loop tape holders Packs of Model No. ◾ For simple, fast cable attachment ◾ Toolless mounting in the system punchings with 10.5 x 12.5 mm, with a quarter rotation ◾ Direct use on the horizontal TS frame section, on the support strips and mounting angles of the TS-IT 482.6 mm (19˝) interior installation, on the cable route or on punched sections with mounting flanges ◾ Length of nylon loop tape: 400 mm 10 pc(s). 5502.155 Material: – Plastic Supply includes: – 10 holders including nylon loop tape Nylon loop cable holder Self-adhesive Suitable for universal use in all network enclosures and server racks, wall-mounted enclosures, mounting plates, gland plates. Size Length x width mm Packs of Model No. 70 x 16 10 pc(s). 7111.350 Material: – Woven polyamide 6.6 Colour: – Black Snap-in cable routing Version Packs of Model No. for clipping into the system punchings. Cable routing suitable for universal use, for toolless, fast assembly, in two variants: For locking For system punchings 6.2 mm 10 pc(s). 7111.300 For twisting For system punchings 4.7 mm 10 pc(s). 7111.310 For locking ◾ User-friendly opening for cable management via locating points ◾ For cable diameters 14 – 19 mm ◾ For system punchings 6.2 mm For routing ◾ User-friendly opening for cable management ◾ For cable diameters 10.2 – 12.7 mm ◾ For system punchings 4.7 mm Material: – Polyamide 6.6, self-extinguishing to UL 94-V2 Colour: – Natural 668 Rittal Catalogue 34/System accessories Cable management Cable clamp rails For the inner mounting level For enclosures for TS and between the mounting angles of the TS-IT in the enclosure depth For cable routing on the enclosure frame. The cables may be attached to the cable clamp rails with cable ties or nylon loops. The cable clamp rails are simply located onto the frame section and may additionally be secured with a screw. Material: – Sheet steel Packs of Model No. 600 4 pc(s). 7828.061 800 4 pc(s). 7828.081 1000 1000 4 pc(s). 7828.101 1200 1200 4 pc(s). 7828.121 Packs of Model No. Width mm Depth mm 600 800 For the outer mounting level For enclosures Supply includes: – Assembly parts Width mm Depth mm 600 600 4 pc(s). 7828.062 800 800 4 pc(s). 7828.082 1000 1000 4 pc(s). 7828.102 1200 1200 4 pc(s). 7828.122 Accessories: – Cable ties, see page 667 – Nylon loop, see page 667 Cable clamp rails, depth-variable for TS and between the mounting angles of the TS-IT in the enclosure depth For cable routing on the enclosure frame and for strain relief of the routed cables. The cables may be attached to the cable clamp rails with cable ties or nylon loops. The cable clamp rails may be located horizontally at the rear directly onto a 482.6 mm (19˝) mounting frame or in the enclosure depth between two mounting frames. An additional screw fastening secures the unit. The depth variability of the rails facilitates flexible adaptation of their length to the existing attachment distance between the two 482.6 mm (19˝) mounting levels. 1) Mounting dimensions 1) mm Packs of Model No. 325 – 575 4 pc(s). 7858.160 500 – 895 4 pc(s). 7858.162 Mounting dimensions + 152 mm = distance between 482.6 mm (19˝) levels Accessories: – Cable ties, see page 667 – Nylon loop, see page 667 Material: – Sheet steel Supply includes: – Assembly parts Cable clamp, variable for enclosure-independent mounting Variable attachment from 450 to 800 mm for flexible cable clamping in two variants. Supports attachment to punched sections with and without mounting flanges and direct screw-fastening onto mounting plates and other flat surfaces. Version Packs of Model No. C rail 1 pc(s). 7016.140 T-head rail 1 pc(s). 7016.150 1 Material: – Sheet steel, zinc-plated Supply includes: – Assembly parts C rail T-head rail 2 Rittal Catalogue 34/System accessories 669 Cable management Cable manager Packs of Model No. 20 pc(s). 5502.405 75 Maxi kit 50 ◾ For system-compatible cable deflection while complying with minimal bending radii and to accommodate surplus cables and excess length. The elements may optionally be used individually or in combination for cable routing. They may be combined into semi-circular or circular elements. ◾ Supports use on corners and edges to allow protected cable routing around them ◾ Mounting clips for use above the arc hold the routed cables back within the elements. The elements are also bayable in an axial direction to allow U-based cable routing to the mounting level, or ducting of the cable bundles. Material: – Plastic, UL 94-V0 Colour: – RAL 9005 Supply includes: – Mounting clips and assembly parts Cable shunting ring For flexible, system-compatible cable routing at the side of the 482.6 mm (19˝) mounting angles. Material: – Steel 50 44 75 Dimensions mm Packs of Model No. 125 x 85 10 pc(s). 7111.900 125 x 65 10 pc(s). 7111.000 85 x 43 10 pc(s). 7112.000 Dimensions mm Packs of Model No. 330 x 90/70 4 pc(s). 7220.600 Surface finish: – Zinc-plated Supply includes: – Assembly parts Shunting ring To accommodate large quantities of cables. Shunting ring for side attachment to 482.6 mm (19˝) sections in 800 mm wide network enclosures. The ring is attached asymmetrically providing approx. 110 mm free space in front of the 482.6 mm (19˝) level. This allows even large quantities of cables to be effectively managed. Material: – Steel Surface finish: – Zinc-plated Supply includes: – Assembly parts 670 Rittal Catalogue 34/System accessories Cable management Fibre-optic shunting rings Packs of Model No. Fibre-optic shunting or jumper cables can be inserted into the grooves of the inner body. A rubber ring holds different fibre-optic cables with diameters of up to 4.5 mm. Strain relief and bending radius are ensured. 2 pc(s). 7116.500 Length: 120 mm Possible alternative: – Fibre-optic cable management panel, 1 U, see page 677 Material: – Dual compound plastic Colour: – Exterior: RAL 7035 – Interior: Black Supply includes: – 2 rubber rings – Baying kit – Mounting accessories 1 2 3 4 Assembly: The supplied mounting brackets are suitable for universal use; the fibre-optic cables can be routed to the patch panel in all directions in various mounting positions: At the side, directly on the patch panel In front of the patch panel At the side next to the patch panel Behind the patch panel System supports for cable routes for TS The depth-variable support system may be attached to all 800 – 1200 mm deep TS enclosures with external screw-fastening of the roof plate. The integral system punchings, for screws or captive nuts, support the attachment of most common cable route systems. Packs of Model No. 2 pc(s). 7831.472 Accessories: – Metal multi-tooth screws 5.5 x 13 mm, 2486.500, see page 625 – Captive nuts M6, 8800.340, see page 624 ◾ May be combined with TS-IT fan mounting plate ◾ In combination with punched rail, suitable for accommodating additional cable routing rails or pipelines ◾ Support height: 102 mm Material: – Sheet steel Surface finish: – Powder-coated Colour: – RAL 7035 Rittal Catalogue 34/System accessories 671 Cable management Cable route for TS ◾ For cable clamping and routing with network and server applications ◾ Mounting across the entire depth with 800 mm width, mounting only behind the second 482.6 mm (19˝) pair of mounting angles with 600 mm width ◾ Toolless fast assembly ◾ Alternatively suitable for screw-fastening ◾ Multi-functional punchings for cable management accessories Height mm Packs of Model No. 2000 – 2200 1 pc(s). 5502.120 Accessories: – – – – Cable ties, see page 667 Nylon loop tape, see page 667 Shunting rings, see page 670 Cable routing bars, see page 673 Material: – Sheet steel Colour: – RAL 9005 Surplus cable holder W x H x D mm Packs of Model No. For fastening at the rear area of the enclosure, or at the side of network enclosures. The surplus cable holder can be attached to all depth stays or to punched sections and rails with a 25 mm pitch pattern – mounting dimension 150 mm. May also be joined together. 280 x 151 x 75 1 pc(s). 7220.500 Material: – Sheet steel Colour: – RAL 7035 672 Rittal Catalogue 34/System accessories Cable management 482.6 mm (19˝) cable management Cable routing bars For structured routing of entire cable bundles, the cable bars may be secured to a variety of different positions inside the enclosure. Material: – Support: Sheet steel – Cable routing bars, connection combs: Plastic Colour: – RAL 9005 Supply includes: – Cable routing bars – Connection combs 482.6 mm (19˝) attachment For horizontal cable routing within the distributor level. Thanks to their open mounting holes, they can also be retrospectively slotted onto the 482.6 mm (19˝) system punchings of the mounting level at any time and secured with the existing assembly screws of the installed components. All-round attachment for universal use For vertical and horizontal cable routing inside the enclosure or within the distributor level. U No. of connection combs 4 1 Packs of Model No. 2 pc(s). 4 pc(s). 7111.224 5 pc(s). 10 pc(s). 7111.214 U No. of connection combs Packs of Model No. 4 2 pc(s). 4 pc(s). 7111.222 1 5 pc(s). 10 pc(s). 7111.212 Connection comb For connecting individual cable routing bars into complete systems (included with the supply). Cable duct for TS-IT ◾ High packing density due to U-based cable routing ◾ Hinged on both sides, removable duct cover ◾ Suitable for back-to-back baying ◾ Easily installed with toolless fast assembly on the front and rear 482.6 mm (19˝) mounting angle of the TS-IT ◾ Screw-fastening optionally supported For enclosure height mm U Packs of Model No. 2000 36 1 pc(s). 5502.105 2200 42 1 pc(s). 5502.145 Material: – Sheet steel, plastic UL 94 V0 Colour: – RAL 9005 Supply includes: – Cover and assembly parts – 4 cable retainers for spare cables Rittal Catalogue 34/System accessories 673 Cable management 482.6 mm (19˝) cable management Cable finger 6 U Packs of Model No. for TS-IT ◾ For U-based cable routing ◾ Simple, toolless assembly ◾ Cable routing in conjunction with air baffle plates is supported 14 pc(s). 5502.115 Material: – Plastic, UL 94-V0 Colour: – RAL 9005 482.6 mm (19˝) drawer to accommodate surplus cables The 1 U drawer offers a convenient opportunity for storing surplus cables in an organised, compact and secure way within the 482.6 mm (19˝) levels. ◾ With brush strip at the front for cable entry ◾ T-head rail in the rear section for cable clamping ◾ Ring-shaped kink-free routing of the conductors on adjustable elements in the interior ◾ May be fitted between two 482.6 mm (19˝) levels at a distance of 435 – 750 mm ◾ Independent from the enclosure system ◾ On both L-shaped and cranked mounting angles and mounting frames Distance between levels mm Packs of Model No. 435 – 750 1 pc(s). 7063.200 Accessories: – Nylon loop 7072.220/7072.230, see page 667 Material: – Sheet steel Colour: – RAL 7035 Supply includes: – Drawer including telescopic slides and assembly parts Cable management panel U Ring size mm Packs of Model No. with plastic rings For horizontal management of the patch cables, with 5 cable shunting rings. Cable shunting rings supplied loose. 1 70 x 44 1 pc(s). 7159.035 Material: – Panel: Sheet steel – Rings: Polyamide Colour: – RAL 7035 Cable management panel with steel rings For horizontal management of the patch cables, with 5 cable shunting rings. Material: – Panel: Sheet steel – Rings: Steel Surface finish: – Rings: Zinc-plated 674 Colour U Ring size mm RAL 7035 1 43 x 55 ◾ 1 43 x 55 – 1 43 x 105 ◾ 1 43 x 105 2 2 Packs of Model No. – 1 pc(s). 7257.200 ◾ 1 pc(s). 5502.205 – 1 pc(s). 7257.035 – ◾ 1 pc(s). 7257.005 85 x 125 ◾ – 1 pc(s). 7257.100 85 x 125 – ◾ 1 pc(s). 7257.105 RAL 9005 Rittal Catalogue 34/System accessories Cable management 482.6 mm (19˝) cable management Cable management panel with cable routing bars 482.6 mm (19˝) For horizontal management of the patch cables with cable routing bars. Opening the individual cable routing bars allows user-friendly modification and extension of the cabling. Material: – Panel: Sheet steel, spray-finished – Cable routing bars: Plastic Colour U Bar depth mm No. of bars/U RAL 7035 1 approx. 80 5 ◾ 1 approx. 80 5 – Packs of Model No. – 1 pc(s). 7257.050 ◾ 1 pc(s). 5502.225 RAL 9005 Cable management panel, 2 U 482.6 mm (19˝) The cable routing chamber has cut-outs from above, into which the patch cables can be inserted. The cable management panel is equipped with a flap and quick-release fasteners at the front, for optimum access to the cables. From the rear, the cables can be inserted via a cut-out with brush strips. Material: – Sheet steel Colour U Bar depth mm RAL 7035 2 85 ◾ 2 85 – Packs of Model No. – 1 pc(s). 7158.035 ◾ 1 pc(s). 5502.235 Packs of Model No. RAL 9005 Cable routing channel 482.6 mm (19˝) To hold the patching cables. Material: – Sheet steel Colour U Depth mm RAL 7035 1 85 ◾ – 1 pc(s). 7149.135 1 85 – ◾ 1 pc(s). 5502.245 Rittal Catalogue 34/System accessories RAL 9005 675 Cable management 482.6 mm (19˝) cable management Cable management panel, 2 U U Packs of Model No. To accommodate fibre-optic and copper cables. Fibres from the patch panels are placed into the tray via openings and may be distributed at the sides. Rounded openings protect the cable sheathing. 2 1 pc(s). 7269.135 U Packs of Model No. 2 1 pc(s). 7158.100 Cable tray, 2 U U Packs of Model No. For side routing and distribution of fibre-optic and copper cables. In this way, cables inserted into the roof area may be routed at the side of the mounting angles in the upper section of the rack. 2 1 pc(s). 7269.235 Material: – Sheet steel Colour: – RAL 7035 Cable management duct, horizontal 482.6 mm (19˝) The duct facilitates concealed, simple cable routing of large quantities of cables to installed equipment within the 482.6 mm (19˝) attachment level. Large cut-outs ensure convenient, kink-free cable routing to the components top and bottom. For simple handling, the entire front panel may be removed via quick-release fasteners. After attaching the cables, these are held in position by nylon loop tapes, whilst the duct is resealed. Material: – Sheet steel Colour: – RAL 7035 Supply includes: – 5 nylon loops Depth: 85 mm Material: – Sheet steel Colour: – RAL 7035 676 Rittal Catalogue 34/System accessories Cable management 482.6 mm (19˝) cable management Fibre-optic cable management panel, 1U 482.6 mm (19˝) The four fibre-optic cable shunting rings integrated into the front permit optimum management of up to 48 fibres. Material: – Panel: Sheet steel – Ring: Dual compound plastic U Packs of Model No. 1 1 pc(s). 7256.035 Possible alternative: – Fibre-optic shunting ring 7116.500, see page 671 Colour: – Panel: RAL 7035 – Cable shunting rings on the outside: RAL 7035, black interior Cable entry panel U Packs of Model No. 482.6 mm (19˝) Cut-out 390 x 40 mm (2 U) or 390 x 20 mm (1 U) with brush insert. 1 1 pc(s). 5502.255 2 1 pc(s). 5502.265 Material: – Sheet steel Colour: – RAL 9005 Cable routing across the 482.6 mm (19˝) level There are various different cable clamping systems available for system-compatible cable routing in 482.6 mm (19˝) systems with one or two pairs of mounting angles: C rail for fastening across all 482.6 mm (19˝) levels, for cable clamps Cable clamp rail for fastening across all 482.6 mm (19˝) levels, for cable ties Rittal Catalogue 34/System accessories Material: – Sheet steel 1 Surface finish: – Zinc-plated 2 Supply includes: – Assembly parts C rail Depth in mm Packs of Model No. 482.6 mm (19˝) level – 6 pc(s). 7016.100 Cable clamp rail Depth in mm Packs of Model No. 482.6 mm (19˝) level – 6 pc(s). 7016.110 677 482.6 mm (19˝) installation system Swing frames Swing frame, small Installation for TS, SE, 600 mm and 800 mm wide enclosures For mounting 482.6 mm (19˝) equipment. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Cam with double-bit lock insert and parts for attaching to the installation kit Technical details: Available on the Internet Front, top/bottom Installation Set back, top/bottom Set back, front, centre 1 1 1 2 1 2 1 2 2 1 U Packs of Model No. 3 1 pc(s). 2377.030 6 1 pc(s). 2377.060 9 1 pc(s). 2377.090 12 1 pc(s). 2377.120 15 1 pc(s). 2377.150 18 1 pc(s). 2377.180 Also required: For enclosure width Installation kit PS punched section without mounting flange Requirements: 2 or 4 pc(s). 1 set(s) 600 800 2377.860 2377.880 For enclosure depth mm Page 400 4 pc(s). 4374.000 611 500 4 pc(s). 4375.000 611 600 4 pc(s). 4376.000 611 800 4 pc(s). 4377.000 611 6 set(s) 8800.330 620 2484.000 570 Support bracket, 2 pc(s). required per PS punched section without mounting flange Accessories Lock inserts, type D Note: – The swing frame stay is required to hold open the swing frame, see page 681 678 Rittal Catalogue 34/System accessories 482.6 mm (19˝) installation system Swing frames Swing frame, large without trim panel, for 600 mm and 1200 mm wide enclosures For mounting 482.6 mm (19˝) equipment. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Cam with double-bit lock insert and parts for attaching to the installation kit Technical details: Available on the Internet Full installation, front/set back Installation Partial installation, top, Partial installation, front/set back centre, front/set back 1 1 1 2 2 2 2 2 1 1 1 For enclosure width mm 600 1200 U For min. enclosure height mm Packs of Model No. 22 1200 1 pc(s). 2322.700 31 1600 1 pc(s). 2331.700 36 1800 1 pc(s). 2336.700 40 2000 1 pc(s). 2340.700 45 2200 1 pc(s). 2345.700 Accessories Page Lock inserts, type D 2484.000 570 Also required: Installation kits For enclosure TS SE Hinge Load capacity Packs of N2) ◾ ◾ 130° < 1500 1994.835 – 1 set(s) ◾ ◾ 130° < 1500 N2) – 1996.835 1 set(s) ◾ ◾ 130° < 1500 N1) – 1996.535 1 set(s) 1) Installation only possible with the mounting plate slide rail dismantled 2) Maximum load 800 N with the TS mounting plate slide rail dismantled For TS, SE: TS punched section with mounting flange 23 x 73 mm, 2 or 4 pc(s). required Installation in enclosure depth mm 1) Packs of Model No. Page 400 4 pc(s). 8612.1401) 606 500 4 pc(s). 8612.550 607 600 4 pc(s). 8612.560 607 800 4 pc(s). 8612.580 607 1000 4 pc(s). 8612.500 607 1200 4 pc(s). 8612.520 607 Note: – The swing frame stay is required to hold open the swing frame, see page 681 TS punched section with mounting flange, 17 x 73 mm Rittal Catalogue 34/System accessories 679 482.6 mm (19˝) installation system Swing frames Swing frame, large Colour: – RAL 7035 with trim panel, for 800 mm wide enclosures For mounting 482.6 mm (19˝) equipment. Supply includes: – Locking rod system with double-bit lock insert and parts for attaching to the installation kit Material: – Sheet steel Technical details: Available on the Internet Surface finish: – Frame: Zinc-plated – Trim panel: Spray-finished Full installation, width 800 mm, front/set back Installation Partial installation, top, width 800 mm, front/set back Partial installation, centre (in the height), width 800 mm, front/set back 1 1 1 1 2 2 2 2 1 1 Side Centre Mounting position With hinge 130°/180° For enclosure width mm 180° 800 U For min. enclosure height mm Packs of 22 1200 1 pc(s). 2323.235 31 1600 1 pc(s). 2332.235 – 36 1800 1 pc(s). 2337.235 2338.235 40 2000 1 pc(s). 2341.235 2342.235 45 2200 1 pc(s). 2346.235 2347.235 U For enclosure height mm Packs of 40 2000 1 pc(s). Model No. 2324.235 Heavy-duty version1) Model No. 7858.100 – Accessories Ergoform-S lock systems see page 568 Lock inserts, version A see page 570 Also required: Installation kits For enclosure TS SE ◾ ◾ ◾ ◾ ◾ ◾ ◾ ◾ Hinge 130° 180° Load capacity Packs of N3) 1995.235 1 set(s) < 1500 N2) 1995.835 1 set(s) < 1200 N3) 1997.235 1 set(s) < 1200 N2) 1997.835 1 set(s) < 1500 1) Load capacity 350 kg, including installation kit, for enclosure height 2000 mm 2) Installation only possible with the mounting plate slide rail dismantled 3) Maximum load 800 N with the TS mounting plate slide rail dismantled Installation in enclosure width/depth mm Packs of Model No. Page 1) 680 For TS, SE: TS punched section with mounting flange, 23 x 73 mm, 2 or 4 pc(s). required 400 4 pc(s). 8612.1401) 606 500 4 pc(s). 8612.550 607 600 4 pc(s). 8612.560 607 800 4 pc(s). 8612.580 607 1000 4 pc(s). 8612.500 607 1200 4 pc(s). 8612.520 607 Note: – The swing frame stay is required to lock the open swing frame, see page 681 TS punched section with mounting flange, 17 x 73 mm Rittal Catalogue 34/System accessories 482.6 mm (19˝) installation system Swing frames Compact swing frame Width mm 600 600 600/760 for AE For the installation of slide-in electronic equipment, 482.6 mm (19˝) across the entire height. Height mm 380 600 760 6 11 14 1 pc(s). 1 pc(s). 1 pc(s). Technical specifications: – Torsionally stiff frame, welded from rectangular tube and triple-folded support section Model No. 2026.200 2027.200 2034.200 Material: – Sheet steel Colour: – RAL 7035 Supply includes: – Double-bit lock insert and assembly parts U Packs of Accessories: – 41 mm lock insert, type C, see page 570 Technical details: Available on the Internet Swing frame stay Packs of Model No. Holds the swing frame in the open position. with 130° hinge 5 pc(s). 1979.200 For mounting on swing frame, large: ◾ 1979.200, at the top of the enclosure ◾ 1980.200, at the bottom of the enclosure (with safety catch at 160°) with 180° hinge 1 pc(s). 1980.200 For mounting on swing frame, small: ◾ 1979.200, may be mounted at the top or bottom on the installation kit Slide rails To support heavy slide-in electronic equipment, 482.6 mm (19˝) in the swing frame. Material: – Sheet steel For equipment with a max. installation depth Packs of Model No. D max. < 190 mm 10 pc(s). 1962.200 D max. > 190 mm 10 pc(s). 1963.200 Surface finish: – Zinc-plated Rittal Catalogue 34/System accessories 681 482.6 mm (19˝) installation system Accessories for Data Rack Second pair of mounting angles To accommodate 482.6 mm (19˝) network components or for the attachment of component shelves and slide rails. 482.6 mm (19˝) punched profile at the front, hole centre distance 465 mm (470 mm at the rear), tailored to the attachment of patch panels and cable routing rails. The mounting level may be positioned on a 50 mm pitch pattern. Minimum distance between levels 150 mm, maximum distance between levels 350 mm. U Packs of Model No. 31 1 pc(s). 7296.000 36 1 pc(s). 7297.000 40 1 pc(s). 7298.000 45 1 pc(s). 7299.000 Technical details: Available on the Internet Material: – Sheet steel, 2 mm Colour: – RAL 7035 Supply includes: – 1 torsionally stiff profile frame – Mounting accessories 50 mm pitch pattern min. 150 – max. 350 Baying clamp Packs of Model No. For assembling rows of distributor frames, or for cable routing between data racks. 3 pc(s). 7494.000 Depth stays Packs of Model No. For securing and stabilising two pairs of 482.6 mm (19˝) mounting angles in the data rack. The length of the depth stay is adjustable, and can accommodate the following spacings of mounting angles: 250, 300 and 350 mm. 2 pc(s). 7401.000 Technical specifications: – Length: 53 mm Colour: – RAL 7035 Material: – Sheet steel Surface finish: – Spray-finished Colour: – RAL 7035 Continuous slide rail Packs of Model No. for two pairs of mounting angles, 482.6 mm (19˝) To support heavy equipment in the Data Rack. The mounting dimensions of the slide rails were selected to enable them to be combined with 500 mm deep, 482.6 mm (19˝) component shelves. The mounting distance between the 482.6 mm (19˝) mounting angles is 350 mm. 2 pc(s). 7402.000 Condition: Second pair of mounting angles 682 Material: – Sheet steel Surface finish: – Zinc-plated Accessories: – Component shelf, 500 mm deep, see page 629 Rittal Catalogue 34/System accessories 482.6 mm (19˝) installation system Mounting angles Adaptor sections, 482.6 mm (19˝) Accessories: – – – – – – for TS For the installation of subracks and other equipment. Adaptor sections are easily shortened for partial assemblies. Infill panels, see page 684 Captive nuts, see page 624 Assembly screws, see page 625 Slide rails with one-sided mounting, see page 688 Slide rails with two-sided mounting, see page 688 Component shelf installation kit, see page 691 Supply includes: – Assembly parts Note: – The 482.6 mm (19˝) measurement is obtained when mounting on the TS frame for enclosures with width 600 mm For enclosure system TS1) For enclosure height mm Material 1600 1800 Extruded aluminium section 2000 1) U Packs of Model No. 33 4 pc(s). 8613.060 38 4 pc(s). 8613.080 42 4 pc(s). 8613.000 For the rear of electronic enclosures, see page 684 Assembly examples of TS: Drawing 1 Drawing 2 Drawing 1 and 2: Mounting angle or adaptor piece fitted in the foremost installation position, directly on the vertical section. When installing slide rails with two-sided mounting (see page 688), the same adaptor sections or adaptor pieces must also be mounted on the vertical section at the rear. 63 43 63 3 75.5 1 1 4 Drawing 3 Drawing 5 Drawing 3: Mounting on two vertically installed PS punched sections permits fully flexible use of the enclosure depth. 5 Drawing 4 and 5: Greater distance from the door is achieved by mounting on adaptor rails for PS compatibility. In this position, the slide rails can be fitted with one-sided mounting. 1 Drawing 4 1 86 66 86 3 Adaptor section/piece Adaptor rail TS sheet steel door Rittal Catalogue 34/System accessories 98.5 2 2 4 TS glazed door Punched section without mounting flange 683 482.6 mm (19˝) installation system Mounting angles Adaptor pieces, 482.6 mm (19˝) U Packs of Model No. for TS, SE The “1 U” sub-section of adaptor sections. For the installation of individual subracks and other equipment. 1 4 pc(s). 8613.010 Supply includes: – Assembly parts Assembly examples: May be found on page 683 Accessories: – – – – Captive nuts, see page 624 Assembly screws, see page 625 Slide rails with two-sided mounting, see page 688 Component shelf installation kit, see page 691 Note: – The 482.6 mm (19˝) measurement is obtained when mounting on the TS frame for enclosures with width 600 mm – Adaptor set 7246.100 for 800 mm wide enclosures, see page 690 Adaptor sections, 482.6 mm (19˝) for rear installation in TS electronic enclosures For installing subracks at the front and back, and for attaching the slide rails 8613.150, 8613.160 and 8613.180 (see page 688). For mounting on the inner mounting level. The outer mounting level may still, for example, be used for cable routing on depth-mounted TS punched sections with mounting flange. Material: – Extruded aluminium section Supply includes: – Assembly parts Note: – Design similar to adaptor sections, 482.6 mm (19˝) (see page 683), but asymmetrical height, suitable for TS electronic enclosure Infill panels, 482.6 mm (19˝), horizontal for adaptor sections To infill between installed 482.6 mm (19˝) equipment positioned in the full enclosure height and the enclosure clearance height. For enclosure height mm U Packs of Model No. 1600 33 2 pc(s). 8613.360 2000 42 2 pc(s). 8613.300 Accessories: – – – – Captive nuts, see page 624 Assembly screws, see page 625 Slide rails with two-sided mounting, see page 688 Component shelf installation kit, see page 691 Possible alternative: – Adaptor pieces, 482.6 mm (19˝), see page 684 For enclosure height mm Packs of Model No. 1600/2000 2 pc(s). 8613.040 1800/2200 2 pc(s). 8613.030 Material: – Extruded aluminium section Supply includes: – Assembly parts 684 Rittal Catalogue 34/System accessories 482.6 mm (19˝) installation system Mounting angles Mounting angles, 482.6 mm (19˝) Full installation Rack height mm U Packs of Model No. for TS 1800 38 2 pc(s). 7827.181 L-shaped The L-shaped mounting angles accommodate the installation kits of server systems. The integral U markings in the front facilitate systematic assembly within the 482.6 mm (19˝) attachment level. 2000 42 2 pc(s). 7827.201 2200 47 2 pc(s). 7827.221 Technical specifications: – 2 mm sheet steel – Integral 482.6 mm (19˝) punchings (EIA standard) – Side round and square punchings – Clear chromated for conductive connection of the 482.6 mm (19˝) installed equipment Supply includes: – Assembly parts Installation bracket TS for L-shaped mounting angles in TS, 482.6 mm (19˝) For upgrading existing DK-TS applications. Installation in enclosure width 800 mm The installation brackets are screw-fastened to the enclosure frame in the enclosure width. The mounting angle is attached to the depth stay at the top and bottom. The brackets ensure optimum clearance at the sides for cable routing. For partial enclosure configuration, the installation brackets may be attached to the TS punched sections with mounting flanges 17 x 73 mm, on the outer attachment level of the enclosure frame. Fully depth-variable attachment is facilitated by the attachment slots. TS punched section with mounting flange as installation kit for L-shaped mounting angles, 482.6 mm (19˝) in TS 482.6 mm (19˝) For upgrading existing DK-TS applications. Installation in enclosure width 600 mm The installation kit consists of 4 TS punched sections with mounting flange 17 x 73 mm to accommodate mounting angles. One pack is sufficient for installing one or two 482.6 mm (19˝) mounting levels. For exceptionally heavy installed equipment, we recommend the installation of additional punched sections in the centre. Rittal Catalogue 34/System accessories Also required: – TS punched sections with mounting flanges or TS installation brackets as installation kit for mounting angles, see page 685 – Attachment of component shelves: Adaptor 7827.300, see page 632 Technical details: Available on the Internet Installation position Packs of Model No. Centre 2 pc(s). 7827.480 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Accessories: – For partial installation, TS punched section with mounting flange, 17 x 73 mm, see page 606 – 607 – For partial installation, mounting angles, L-shaped, see page 685 For enclosures Width mm Depth mm Packs of Model No. 600 600 4 pc(s). 8612.060 600 800 4 pc(s). 8612.080 600 1000 4 pc(s). 8612.000 600 1200 4 pc(s). 8612.020 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts 685 482.6 mm (19˝) installation system Mounting angles Additional fastening attachment for mounting angles for 800 mm wide network enclosures For upgrading existing DK-TS applications. The additional fastening attachment counteracts bending of the mounting angles mounted on installation brackets in case of unevenly distributed loads. It is attached directly to 482.6 mm (19˝) mounting angles and to the punched section with mounting flange fitted in the depth (inner mounting level). Packs of Model No. 2 pc(s). 7284.135 Also required: – TS punched section with mounting flange, for the inner mounting level, see page 606 – 607 Material: – Sheet steel Supply includes: – Assembly parts Mounting angles, 482.6 mm (19˝) U Packs of Model No. 6 2 pc(s). 7507.706 for FlatBox L-shaped bracket as 2nd mounting level. 9 2 pc(s). 7507.709 12 2 pc(s). 7507.712 Material: – Sheet steel 15 2 pc(s). 7507.715 18 2 pc(s). 7507.718 Supply includes: – Assembly parts for fast, toolless assembly 21 2 pc(s). 7507.721 Note: – The 2nd attachment level should always be ordered in the same height as the basic enclosure – Partial configuration is not possible Adhesive measurement strip, 482.6 mm (19˝) U labelling range Packs of Model No. 1 – 56 1 pc(s). 7950.100 For upgrading existing DK-TS applications. Made from robust aluminium foil, guarantees easy handling and durability. With numerical labelling on a 482.6 mm (19˝) pitch pattern for clear identification of the various height units. The double-sided labelling allows the counting direction to be freely selected, up to a maximum of 56 U. In this way, clear documentation of the various mounting parts is easily achieved. Material: – Aluminium foil 686 Rittal Catalogue 34/System accessories 482.6 mm (19˝) installation system Slide rails Slide rails, static installation U Length mm Packs of Model No. for TS-IT For mounting between 482.6 mm (19˝) mounting angles. 2 150 2 pc(s). 5501.400 ◾ System punchings for mounting accessories and cooling active components Load capacity: – 30 kg, static Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Slide rails, static installation for TS-IT For mounting between a front and a rear pair of mounting angles. ◾ To support heavy installed equipment ◾ Side system punchings for mounting accessories and cooling components that expel to the side ◾ Simply locate into the system punchings of the TS-IT U 482.6 mm (19˝) distance between levels mm Packs of Model No. 1 345 2 pc(s). 5501.410 1 445 2 pc(s). 5501.420 1 545 2 pc(s). 5501.430 1 645 2 pc(s). 5501.440 1 745 2 pc(s). 5501.450 Load capacity: – 80 kg, static Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Note: – Effective contact surface 35 mm per side Depth-variable slide rails 482.6 mm (19˝) for TS-IT For mounting between a front and a rear pair of mounting angles. Thanks to side attachment on the front section, all three mounting holes in the EIA system punchings remain available for screw-fastening the equipment. ◾ To support heavy installed equipment ◾ To adapt to individual distances between levels ◾ Tool-free, time-saving one-man assembly from the enclosure front ◾ All three mounting holes in the EIA system punchings are available for screw-fastening the equipment ◾ Alternatively, direct attachment to the 482.6 mm (19˝) system punchings is also possible Rittal Catalogue 34/System accessories 482.6 mm (19˝) distance Load between levels capacity mm kg Packs of Model No. 400 – 600 80 2 pc(s). 5501.460 600 – 900 150 2 pc(s). 5501.480 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Note: – Effective contact surface 25 mm per side 687 482.6 mm (19˝) installation system Slide rails Depth-variable slide rails, 1U for server and network enclosures with two 482.6 mm (19˝) mounting levels, without additional loss of U For direct attachment to the 482.6 mm (19˝) system punchings of the mounting angles. The slide rails are pulled out to the required length and secured between the front and rear pairs of mounting angles on the 482.6 mm (19˝) pitch pattern. Load capacity: – 20 kg static load 482.6 mm (19˝) distance between levels mm Support area Packs of mm Model No. 390 – 550 30 2 pc(s). 7063.750 550 – 750 30 2 pc(s). 7063.752 Note: – Thanks to the thin support area of only around 0.8 mm thickness, exceeding the U pitch pattern is generally avoided, provided the components do not exceed a maximum height of 43.5 mm. This means that several devices are easily arranged on top of one another without offsetting. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Slide rails for TS adaptor section With two-sided mounting between the 482.6 mm (19˝) front and rear adaptor sections, 482.6 mm (19˝) or adaptor pieces, 482.6 mm (19˝). Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Slide rails for TS adaptor section With one-sided mounting on the 482.6 mm (19˝) adaptor sections. Material: – Sheet steel Surface finish: – Zinc-plated For enclosure depth mm Packs of Model No. 500 10 pc(s). 8613.150 600 10 pc(s). 8613.160 800 10 pc(s). 8613.180 Also required: – Adaptor sections, 482.6 mm (19˝), see page 683, or – Adaptor pieces, 482.6 mm (19˝), see page 684 Length mm Packs of Model No. 270 10 pc(s). 4531.000 Also required: – Adaptor sections, 482.6 mm (19˝), see page 683 Supply includes: – Assembly parts 688 Rittal Catalogue 34/System accessories 482.6 mm (19˝) installation system 482.6 mm (19˝) installation Server telescopic slides Facilitate optimum accessibility to the units, even when built-in. For up to a maximum enclosure width of 426 mm. Load capacity: – 30 kg Material: – Sheet steel For enclosure depth mm Maximum extension mm Model No. 600 511.2 3659.180 800 596.4 3659.190 Note: – May only be fitted in conjunction with L-shaped 482.6 mm (19˝) sections Supply includes: – 1 set = 2 telescopic slides Installation kit Assembly parts Mounting kit, 2 U Packs of Model No. for 482.6 mm (19˝) equipment Facilitates fast, simple integration of additional 2 U mounting space within an enclosure by attaching to the enclosure frame or to the existing mounting angles at the sides. The flexible slot fastening of the brackets means that the distance between the two installation brackets may be freely selected, so that other 482.6 mm (19˝) attachment dimensions may be implemented. The second row of holes is used for the optional configuration of additional mounting surfaces. 2 pc(s). 7246.420 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Rittal Catalogue 34/System accessories 689 482.6 mm (19˝) installation system 482.6 mm (19˝) installation Adaptor kit, 3 U for 800 mm wide TS enclosures For fastening individual 482.6 mm (19˝) components, or as an additional mounting facility at the rear of the enclosure. The mounting level in the adaptor angle can be adjusted in 25 mm increments by up to 100 mm in the depth, leaving sufficient space for baying where patch panels or splicing boxes are used. Attachment is on the inner mounting level of the frame section or a suitable chassis in the enclosure depth. Height Mounting position Packs of Model No. 3U Centre 2 pc(s). 7246.100 Material: – Sheet steel Colour: – RAL 7035 Adaptor, 3 U Packs of Model No. Depth offset 100 mm This adaptor is used to recess 482.6 mm (19˝) mounting of equipment inside enclosures with 482.6 mm (19˝) installation in the foremost position, such as server or electronic enclosures. In this way, sufficient space can be gained in front of the mounting equipment to integrate patch panels or switches, whilst at the same time exploiting the maximum enclosure depth. 2 pc(s). 7246.400 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Adaptor, metric to 21˝/19˝ With this adaptor, 482.6 mm (19˝) assemblies may be fastened to metric (535 mm) mounting angles, or combined systems may be configured. SU U Packs of Model No. 2 1 2 pc(s). 7246.010 6 3 2 pc(s). 7246.030 11 6 2 pc(s). 7246.060 Material: – Extruded aluminium section Supply includes: – Assembly parts 690 Rittal Catalogue 34/System accessories 482.6 mm (19˝) installation system 482.6 mm (19˝) installation Drawer, 2 U, 3 U for a 482.6 mm (19˝) attachment level For front attachment to mounting angles, 482.6 mm (19˝). With cover and telescopic slides to accommodate assignment lists, operating manuals and small parts. The small version of the 2 U variant is also suitable for mounting inside a swing frame. Clearance openings Height Width mm Depth mm Material: – Sheet steel Supply includes: – Fully assembled, including assembly parts Colour Installation depth mm RAL 7035 RAL 9005 Packs of Model No. 7282.035 2U 411 419 427 ◾ – 1 pc(s). 2U 411 419 427 – ◾ 1 pc(s). 5502.305 3U 411 419 427 ◾ – 1 pc(s). 7283.035 3U 411 419 427 – ◾ 1 pc(s). 5502.325 Installation kit for component shelves with 482.6 mm (19˝) adaptor sections in TS For installation between the front and rear adaptor sections or adaptor pieces, 482.6 mm (19˝) in 600 mm wide enclosures. Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Rittal Catalogue 34/System accessories For enclosure system TS For enclosure depth mm Packs of Model No. 600 1 set(s) 8800.560 800 1 set(s) 8800.580 Max. depth of component shelves = Enclosure depth -100 mm Also required: – Adaptor sections, 482.6 mm (19˝), see page 683, or – Adaptor pieces, 482.6 mm (19˝), see page 684 691 482.6 mm (19˝) installation system 482.6 mm (19˝) installation Blanking plates, 482.6 mm (19˝) U Packs of Model No. For installation in electronic enclosures or housings. 1 3 pc(s). 1931.200 Material: – Aluminium 2 3 pc(s). 1932.200 3 3 pc(s). 1933.200 Surface finish: – Natural anodised 4 3 pc(s). 1934.200 6 3 pc(s). 1936.200 7 3 pc(s). 1935.200 9 3 pc(s). 1939.200 12 3 pc(s). 1937.200 Hinge Packs of Model No. for blanking plates 2 pc(s). 1950.000 Material: – Die-cast zinc Surface finish: – Zinc-plated Supply includes: – Assembly parts Ventilated front panels Width U Packs of Model No. For venting enclosures and housings. 482.6 mm (19˝) 1 3 pc(s). 2231.000 Material: – Aluminium 482.6 mm (19˝) 2 3 pc(s). 2232.000 482.6 mm (19˝) 3 3 pc(s). 2233.000 Surface finish: – Natural anodised Air baffle plate for TS-IT ◾ To separate the hot/cold zones within an enclosure with aisle containment or when using an LCP system ◾ With all-round brush strip for collision-free shielding with installed bar systems on the outer mounting level ◾ For width 800 mm, 6 x 1 U blanking panel additionally included Width x height mm Packs of Model No. 600 x 2000 1 set(s) 5501.805 800 x 2000 1 set(s) 5501.815 600 x 2200 1 set(s) 5501.825 800 x 2200 1 set(s) 5501.835 Material: – Sheet steel, plastic UL 94 V0 Surface finish: – Spray-finished Colour: – RAL 9005 Supply includes: – Assembly parts 692 Rittal Catalogue 34/System accessories 482.6 mm (19˝) installation system 482.6 mm (19˝) installation Cover, magnetic For optionally covering the front system punchings in the event of complete air blocking of the front, or in the absence of installed cable fingers or dynamic rack control strip. Brush strip, vertical for TS-IT Within the network distributor, this serves as a flexible infill panel which stylishly conceals the cable management area to the side of the 482.6 mm (19˝) mounting level. The brush strip facilitates convenient cable routing from the side and rear distributor area to the front connection level. The clearance required in front of the mounting level is at least 75 mm. Within the TS, the brush strip is mounted at the side on the vertical frame section, on horizontal or vertical punched sections. There is an additional mounting option directly on the 482.6 mm (19˝) mounting level of the TS. Length m Packs of Model No. 5 1 pc(s). 5501.895 For enclosure height mm Packs of Model No. 2000 1 set(s) 7827.544 Material: – Aluminium section with brush strip: Plastic, UL 94-V0 Supply includes: – 1 set = 4 brush strips, Length 950 mm each Mounting panel 482.6 mm (19˝), 2U For fast integration of smaller mounting units within the 482.6 mm (19˝) level, such as potential equalisation rails, distributor boxes, small electrical components etc. Simple screw-fastening of the components to the integral 25 mm system punchings. Panel height U Panel width mm Packs of Model No. 2 450 1 pc(s). 7151.300 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Rittal Catalogue 34/System accessories 693 482.6 mm (19˝) installation system 482.6 mm (19˝) installation Support W x H x D mm Packs of Model No. for small appliances For secure attachment of small, non-482.6 mm (19˝)-conforming equipment such as modems, power packs, routers etc. Angle-shaped support for mounting in the empty space at the side between the 482.6 mm (19˝) level and the side panel on L-mounting angles, mounting frames or chassis. Attachment of the components and connection cables can be achieved quickly and easily using nylon loop tape or cable ties. Also suitable for cable routing in the enclosure depth. 350 x 150 x 97 1 pc(s). 7246.500 Accessories: – Nylon loop, see page 667 – Cable ties, see page 667 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Captive nuts M5/M6 For the attachment of rack-mounted electronic equipment, 482.6 mm (19˝) installed equipment and blanking plates to mounting angles, 482.6 mm (19˝). For use with metal thicknesses from 0.8 – 2.0 mm. In areas of narrow tolerance, the captive nuts for metal thicknesses of 1.2 – 1.5 mm should be used. Optionally with or without contact of the installed equipment to the 482.6 mm (19˝) section/enclosure. Captive nut M5 For metal thicknesses Packs of Model No. mm Version With contact 0.8 – 2.0 50 pc(s). 2094.500 Without contact 0.8 – 2.0 50 pc(s). 2092.500 Captive nut M6 For metal thicknesses Packs of Model No. mm Version With contact 0.8 – 2.0 50 pc(s). 2094.200 Without contact 0.8 – 2.0 50 pc(s). 2092.200 With contact 1.2 – 1.5 50 pc(s). 2094.300 Without contact 1.2 – 1.5 50 pc(s). 2092.300 Multi-tooth screws M5 x 16 mm/M6 x 16 mm For optimum transmission of torques, an extended tool life and increased safety and reliability when tightening and loosening screw connections. Bit size Packs of Model No. M5 Multi-tooth 25 50 pc(s). 7094.130 M6 Multi-tooth 30 50 pc(s). 7094.140 Supply includes: – Plastic washers 694 Rittal Catalogue 34/System accessories 482.6 mm (19˝) installation system 482.6 mm (19˝) installation Assembly screws M5 x 16 mm/M6 x 16 mm For electronic equipment, 482.6 mm (19˝) installed components and blanking plates. Version Packs of Model No. Phillips-head screw M5 50 pc(s). 7094.120 Cheese-head screw M6 50 pc(s). 7094.110 Phillips-head screw M6 50 pc(s). 7094.100 Supply includes: – Plastic washers Front-mounting cage nut, 482.6 mm (19˝) The front-mounting cage nut consists of an expanding cage which is simply inserted into the square attachment hole at the front and then secured with the assembly screw. When tightening the screw, the cage expands and thus secures the required components. Clamping range from 1.2 – 4.5 mm. Multi-tooth screw head, bit size T 30. Size mm Mounting hole size mm Packs of Model No. M6 x 16 9.5 x 9.5 50 pc(s). 2094.400 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – 50 expanding nuts – Assembly screws – Plastic washers Spring nuts with screws M6 x 10 mm for T-slot mounting angle The spring nuts ensure flexible, secure mounting of accessory components on T-slot mounting angles. Version Packs of Model No. Phillips-head, M6 50 pc(s). 7000.990 Supply includes: – 50 spring nuts – 50 screws, 10 mm, self-locking Rittal Catalogue 34/System accessories 695 482.6 mm (19˝) installation system Patch panels Blanking panel, 482.6 mm (19˝) Colour: RAL 7035 As an extension cover or for population as required. U Installation height mm Packs of Model No. Material: – Sheet steel 1 44 2 pc(s). 7151.035 1.5 66 2 pc(s). 7157.035 2 88 2 pc(s). 7152.035 3 132.5 2 pc(s). 7153.035 6 266 2 pc(s). 7156.035 Colour: RAL 9005 Blanking panel, 1 U Toolless attachment, 482.6 mm (19˝) The blanking panel is used to seal unused areas within the 482.6 mm (19˝) mounting level. Quick toolless attachment means that it is easily integrated anywhere, and can also be removed again if necessary. The consistent use of blanking panels ensures targeted air routing in partially populated racks. U Installation height mm Packs of Model No. 1 44 2 pc(s). 7151.005 2 88 2 pc(s). 7152.005 3 132.5 2 pc(s). 7153.005 6 266 2 pc(s). 7156.005 Colour Packs of Model No. RAL 7035 10 pc(s). 7151.110 RAL 9005 10 pc(s). 7151.105 Material: – Plastic, ABS Fire protection: – Self-extinguishing to UL 94-V0, non-halogen-free 696 Rittal Catalogue 34/System accessories 482.6 mm (19˝) installation system Splicing boxes Fibre-optic splicing box, depth-variable The 482.6 mm (19˝) splicing box is designed to accommodate splicing cassettes and can be installed in any network distributor with 482.6 mm (19˝) accommodation and used as a fibre-optic termination or distributor. The variable cassette fixture permits twist-proof installation of all standard splicing cassettes. The rear section of the splicing box is completely open for cable entry; a rubber cable clamp strip provides protection against dust. The fibre-optic cables can be secured with cable ties or cable clamps. The splicing box is infinitely depth-adjustable up to 100 mm within the 482.6 mm (19˝) flanges. In addition, the splicing box may be fully withdrawn from the 482.6 mm (19˝) flanges. Two strain relief clips and cable routing clips for the fibre stock provide a solution to suit any fibre-optic wiring system. U Maximum no. of splicing cassettes Packs of Model No. 1 2 1 pc(s). 7241.005 Installation depth: – 302 mm Material: – Sheet steel Colour: – RAL 7035 Supply includes: – Splicing box – Cable routing clips – Cassette cover – Mounting accessories for patch panel Note: – Supplied without patch panel and splicing cassettes Fibre-optic breakout box, 1 U Installation depth Packs of Model No. 250 mm 1 pc(s). 7241.500 For splice-free cabling of fibre-optic breakout cables. Cable bundles may be clamped onto the T-heads at the rear. 4 self-adhesive cable clips are supplied loose for cable clamping and for storing excess lengths inside the box. Material: – Sheet steel Colour: – RAL 7035 Supply includes: – Breakout box – Cable routing clips – Mounting accessories for patch panel Patch panels for ◾ Fibre-optic splicing box, depth-variable ◾ Fibre-optic breakout box, 1 U With cut-outs for population with fibre-optic couplings. Material: – Sheet steel Colour: – RAL 7035 Rittal Catalogue 34/System accessories Number of locations U Packs of Model No. ST 24 2 1 pc(s). 7242.015 E-2000, E-2000 duplex1), SC or LC duplex 24 1 1 pc(s). 7241.024 SC duplex, LC quad 12 1 1 pc(s). 7241.045 For Coupling 1) For E-2000 duplex only half of the locations are available 697 482.6 mm (19˝) installation system Splicing boxes Fibre-optic splicing box with telescopic pull-out Lockable The 482.6 mm (19˝) splicing box is designed to accommodate splicing cassettes and can be installed in any network distributor with 482.6 mm (19˝) accommodation and used as a fibre-optic termination or distributor. The telescopic pull-out provides optimum access to the splicing cassettes and cable clamp. The variable cassette fixture permits twist-proof installation of all standard splicing cassettes. The security lock fitted at the front protects against unauthorised access. The rear section of the splicing box is completely open for cable entry; a rubber cable clamp strip provides protection against dust. The fibre-optic cables can be secured with cable ties or cable clamps; two strain relief clips and cable routing clips for the fibre stock provide a solution to suit any fibre-optic wiring system. U Maximum no. of splicing cassettes Packs of Model No. 1 2 1 pc(s). 7170.535 2 4 1 pc(s). 7470.535 Installation depth: – 363 mm Material: – Sheet steel Colour: – RAL 7035 Supply includes: – Splicing box – Cable routing clips – Security lock – Cassette cover – Mounting accessories for patch panel Note: – Supplied without patch panel and splicing cassettes Patch panels for fibre-optic splicing box, lockable For splicing boxes, there is a choice of multiple panels with different cut-outs for the installation of single or duplex fibre-optic couplings. For coupling Material: – Sheet steel Colour: – RAL 7035 No. of locations U Packs of Model No. ST 24 2 1 pc(s). 7474.535 E-2000, SC, LC Single or duplex 20 1 1 pc(s). 7178.535 24 2 1 pc(s). 7478.535 12 1 1 pc(s). 7169.535 24 2 1 pc(s). 7469.535 SC duplex, LC quad Patch panels for small fibre-optic distributors Various patch panels with different connector types are available for individual configuration of small fibre-optic distributors. Material: – Sheet steel For coupling ST SC-, E-2000, E-2000 duplex SC duplex Locations Locations Packs per patch per Model No. of panel enclosure 12 24 2 pc(s). 7462.000 12/6 24/12 2 pc(s). 7463.100 6 12 2 pc(s). 7463.200 Colour: – RAL 7035 Supply includes: – Patch panel including assembly parts, without couplings 698 Rittal Catalogue 34/System accessories 482.6 mm (19˝) installation system LSA connection system Support unit, 3 U U Packs of Model No. for LSA-Plus strips, max. 150 paired wires To accommodate a maximum of 15 LSA-Plus strips (each with 10 paired wires). 3 x 5 LSA-Plus connection strips 2/10, series 2, may be installed horizontally. Strip length 124 mm, height pitch pattern 22.5 mm. The support unit may be integrated into all 482.6 mm (19˝) mounting levels. The mounting level is recessed 75 mm behind the 482.6 mm (19˝) flanges. Integral shunting rings enable tidy routing and distribution of the telecommunication cables. 3 1 pc(s). 7050.100 Accommodation system, 2 U U Packs of Model No. for LSA installation kit To accommodate LSA support systems within the 482.6 mm (19˝) mounting level. 2 2 pc(s). 7050.035 Material: – Stainless steel Supply includes: – Support unit, 8 shunting rings Size: – Overall depth: 98.5 mm – Height: 2 U Material: – Sheet steel Colour: – RAL 7035 Rittal Catalogue 34/System accessories 699 Handles Handle set for Comfort Panel For external mounting on corner pieces, also suitable for retro-fitting. Material: – Handle tube: Aluminium – Handle holder: Die-cast zinc – Covers: Polyamide Surface finish: – Handle tube: Natural anodised – Handle holder: Powder-coated Colour: – Handle holder: RAL 7024 – Covers: Similar to RAL 7024 Supply includes: – Handle tube, Ø 20 mm – 2 handle holders – 2 covers – Assembly parts Handle set for Optipanel For external mounting on corner pieces, also suitable for retro-fitting. Material: – Handle tube: Aluminium – Handle holder: Die-cast zinc – Covers: Polyamide Surface finish: – Handle tube: Natural anodised – Handle holder: Powder-coated Colour: – Handle holder: RAL 7035 – Covers: RAL 7024 Supply includes: – Handle tube, Ø 25 mm – 2 handle holders – 2 covers – Assembly parts 700 For horizontal mounting With front panel width Packs of Model No. 482.6 mm (19˝) 1 set(s) 6375.010 Note: – Shorter heights and widths can be achieved by cutting the handle tube to length – For enclosures with 74 mm installation depth, cannot be mounted on the same side as the support arm connection Accessories: – Clipboard, see page 703 – Display board, see page 703 For horizontal mounting With front panel width Packs of Model No. 482.6 mm (19˝) 1 set(s) 6385.010 Note: – Shorter heights and widths can be achieved by cutting the handle tube to length – For enclosures with 100 mm installation depth, cannot be mounted on the same side as the support arm connection Accessories: – Clipboard, see page 703 – Display board, see page 703 Rittal Catalogue 34/System accessories Handles Handle set For vertical and horizontal mounting on all surfaces. Packs of Model No. 1 set(s) 2389.000 Overall length: 420 mm Material: – Handle tube: Aluminium – Tube holder: Die-cast zinc Surface finish: – Handle tube: Natural anodised Accessories: – Clipboard, see page 703 – Display board, see page 703 Colour: – Tube holder: RAL 7035 Supply includes: – 4 tube holders – 2 handle tubes TP aluminium strip For retrofitting externally on: ◾ TP three-part/two-part ◾ TP one-piece console ◾ May be mounted on all enclosures/covers with 20 mm fold height (max. metal thickness 2 mm) Length: 1750 mm (Easily cut to length for other dimensions) Sufficient for desk units and consoles: – 3 x width 600 mm – 2 x width 800 mm – 1 x width 1000 mm + 1 x width 600 mm – 1 x width 1200 mm – 1 x width 1600 mm Rittal Catalogue 34/System accessories Length mm Model No. 1750 6731.120 Material: – Aluminium strip: Extruded aluminium section – Cover caps: Plastic Surface finish: – Aluminium strip: Natural anodised Colour: – Cover caps: RAL 7035 Supply includes: – 1 aluminium section – 6 plastic cover caps – Drilling template – Assembly parts 701 Handles Handles For horizontal or vertical attachment to the enclosure panel of: ◾ Comfort Panel ◾ Optipanel ◾ Other enclosures or ◾ Surfaces Mounting holes and surfaces without fins are required for assembly purposes. For the Comfort Panel version with fins, selectable via configurators at www.rittal.com, corresponding milling work may be carried out. To this end, please specify “Prepared for handle set 6107.XXX” for the command panel. Material: – Handle holder: Die-cast zinc – Cover bungs: Plastic – Handle tube: Aluminium Surface finish: – Handle tube: Powder-coated Colour: – Handle holder: RAL 7035 – Cover bungs: Similar to RAL 7035 – Handle tube: Similar to RAL 9006 Corner handle Supply includes: – 4 handle holders – 2 handle tubes – Assembly parts Mounting on enclosure corner Packs of Model No. 1 set(s) 6107.000 Mounting on straight surfaces (90° rotation of handle holder) 153 163 131.5 Ø 6.5 45° Ø 6.5 45 ° 92 (85) 131.5 217 25 132 163 25 U handle Supply includes: – 2 handle holders – 1 handle tube – Assembly parts For front panel size Packs of Model No. ≥7U 1 set(s) 6107.100 482.6 mm (19˝) 1 set(s) 6107.200 Accessories: 45° 92 Ø 25 – For 6107.200: Clipboard, see page 703 – For 6107.200: Display board, see page 703 240 (75) 25 395 (230) 458 (293) Ø 6.5 Note: – Dimensions in brackets for front size 7 U 702 Rittal Catalogue 34/System accessories External mounting accessories Clipboard For attaching operating instructions or plans (A4 size) at eye level. Prepared for mounting on the right-hand side; mounting on the left is also possible by unscrewing and moving the clip part. For mounting purposes, a straight tube length of ≥ 200 mm, Ø 20 mm or Ø 25 mm is required. Material: – Clipboard: Sheet steel – Clip part: Aluminium Surface finish: – Clip part: Natural anodised Width mm Height mm Packs of Model No. 225 315 1 pc(s). 6013.000 Also required: – Handle set 2389.000, see page 701 or – Handle set for Comfort Panel, see page 700 or – Handle set for Optipanel, see page 700 or – U handle 6107.200, see page 702 Colour: – RAL 7035 Display board Packs of Model No. 1 set(s) 6013.100 with wall bracket To accommodate test plans, documents etc. in A4 format. Enclosure surface connector Packs of Model No. 1 set(s) 2383.010 To accommodate keyboard supports (2383.000, see page 709). Material: – Surface connector: Extruded aluminium section – Side cover: Sheet steel Surface finish: – Surface connector: Natural anodised Mounting on surfaces Mounting underneath surfaces 79 Colour: – RAL 7024 56 8 40 Supply includes: – Assembly parts 15 6° ° 10° 90 83 Supply includes: – Display boards – Wall bracket – Assembly parts Accessories: – Handle set 2389.000, see page 701 or – Handle set for Comfort Panel, see page 700 or – Handle set for Optipanel, see page 700 or – U handle 6107.200, see page 702 73.5 Mounting ◾ On surfaces ◾ On a 25 mm pitch pattern of the TS frame or rail system ◾ On handle set Ø 20 mm or Ø 25 mm 30° 30° ° 45 Rittal Catalogue 34/System accessories 67 45° 703 Front assembly Front panels for Comfort Panel and Optipanel Material: – Aluminium, 3 mm Surface finish: – Natural anodised Note: – Mounting kits included with the supply of 520 mm wide standard enclosures. With mounting hole Width mm Height mm Model No. 482.6 (19˝) 155.0 (3.5 U) 6027.000 482.6 (19˝) 310.3 (7 U) 6028.000 With threaded bolts M5 Width mm Height mm Model No. 482.6 (19˝) 155.0 (3.5 U) 6027.010 482.6 (19˝) 310.3 (7 U) 6028.010 520 400 6028.014 520 500 6028.015 520 600 6028.016 Also required: – Mounting kit for Comfort Panel 6053.800, see page 705 – Mounting kit for Optipanel 6053.000/.500, see page 705 Front panels Size WxH mm To fit Compact Panel Model No. Material: – Aluminium, 3 mm 178 x 200 6340.000 6028.500 178 x 350 6340.100 6028.510 Surface finish: – Natural anodised 252 x 200 6340.300 6028.530 252 x 350 6340.400 6028.540 Cover plate Support arm connection Surface finish Model No. ▭ 90 x 71 mm Spray-finished RAL 7024 6505.200 Ø 130 mm Zinc-plated, passivated 6505.500 ▭ 120 x 65 mm Zinc-plated, passivated 6505.100 for Compact Panel for support arm connection For secure sealing of an unrequired support arm connection in the enclosure. Material: – Sheet steel Supply includes: – Seal and assembly parts Note: If with – Comfort Panel – Optipanel – Compact Panel command panels, there are already 2 support arm cut-outs provided, a cover plate is included with the supply of the enclosure 704 Rittal Catalogue 34/System accessories Front assembly Mounting kit for Optipanel For installation of ◾ Aluminium front panels ◾ Command panels ◾ Keyboards for drilled holes Supply includes: – Packs of 30 retaining claws, captive nuts, screws and sealing washers for threaded bolts Supply includes: – Packs of 10 retaining claws and cap screws 1) For front panels Thread Model No. Others M4 6058.000 Rittal and others M5 6053.000 For front panels Thread Model No. Others M4 6058.500 Rittal and others M5 6053.5001) For the installation of TFT monitors 15˝, 17˝ and 19˝ for screw clamp For direct installation of Supply includes: – Packs of 4 pressure plates, 4 attachment strips Siemens Sinumerik: OP 010, OP 010C, OP 012, OP 015, OP 019, MCP 483, PP 012, Querty 19˝, KB 483C, TP 015A Note: – The command panels MP 377 12˝ Touch, MP 377 15˝ Touch are installed using an adaptor plate Siemens Simatic: Panel PC 477C, 577C, 677C: 12.1˝ Touch, 15.1˝ Touch, 12.1˝ Key, 15.1˝ Key, 19˝ Touch1), 22˝ Touch1), Flat Panel1) 12˝, 15˝, 19˝ Model No. 6053.210 Industrial Flat Panel: IFP 1200 Touch, IFP 1500 Touch, IFP 1200 Key, IFP 1500 Key, IFP 1900 Touch, IFP 2200 Touch Industrial Thin Client: ITC 1200, ITC 1500, ITC 1900, ITC 2200 The mounting set can only be installed vertically 1) 2 packs are required Mounting kit for Comfort Panel For the installation of aluminium front panels, command panels and keyboards. Supply includes: – 6058.800, 6053.800: 20 each of retaining claws, captive nuts, screws, nuts and sealing washers – 6053.300: 8 medium retaining claws, 8 short retaining claws, 4 long retaining claws 6058.800, 6053.800 6053.300 For drilled holes/bolts/front panel mounting from the rear Thread Model No. M4 6058.800 M5 6053.800 1 For screw clamp For installation of Model No. Siemens Sinumerik: OP 010, OP 010 C, OP 012, OP 015, OP 015 A, OP 019, MCP 483 C, MCP 483, PP 012, PP 012 extension, MCP, KB 483 C, Querty 19˝ Siemens Simatic: TP 900 Comfort, KP 900 Comfort, TP 1200 Comfort, KP 1200 Comfort, KTP 1000 Basic, KTP 1500 Basic Panel PC 477C, 577C, 677C: 12.1˝ Key, 12.1˝ Touch, 15.1˝ Key, 15.1˝ Touch, 19˝ Touch, 22˝ Touch1) 2 6053.300 MP 377 12˝ Touch, MP 377 15˝ Touch, MP 377 19˝ Touch Industrial Flat Panel: IFP 1200 Touch, IFP 1500 Touch, IFP 1200 Key, IFP 1500 Key, IFP 1900 Touch, IFP 2200 Touch Industrial Thin Client: ITC 1200, ITC 1500, ITC 1900, ITC 2200 B & R: Automation Panel, Panel PC 1) Rittal Catalogue 34/System accessories 2 packs are required 705 Monitors TFT monitor Model No. Installation variant for surfaces and command panels. Width mm Size Benefits: ◾ High-quality industrial design ◾ Reduced installation work thanks to integral front frame ◾ No additional ventilation required ◾ Very small installation depth (45 mm) ◾ Resistive touchscreen for operation with a pen, finger or glove 1) Height mm Touch Without1) Resistive, USB 15˝ 430 343 6450.010 6450.070 17˝ 482.6 354.8 6450.020 – 19˝ 482.6 399.3 6450.170 – With anti-reflection coated safety glass screen Note: – Other variants as resistive touchscreen with serial or USB interface are also possible Material: – Front frame: Aluminium Surface finish: – Powder-coated Also required: Colour: – RAL 7035 – Mounting kit 6053.800 (for installation in Comfort Panel), see page 705 – Mounting kit 6053.500 (for installation in Optipanel), see page 705 – Power pack 6450.050, see page 706 and – Connection cable 6450.060, see page 706, if an operating voltage of only 100 – 240 V AC is available instead of 12 V (DC). Protection category IP to IEC 60 529: – IP 65 (at the front) Supply includes: – Seal, hex nuts (for installation in surfaces), VGA cables, rear threaded bolts M5 (14). Touch variants additionally with integral connection cable and CD-ROM driver Technical details: Available on the Internet Technical specifications 15˝ 17˝ Resolution of display (max. pixels) 1024 x 768 1280 x 1024 19˝ 1280 x 1024 Resolution of controller/million colours VGA-XGA/16.2 VGA-SXGA/16.7 VGA-SXGA/16.2 Brightness cd/m2 400 350 250 Contrast ratio 700:1 1000:1 500:1 H-Sync. kHz/V-Sync. Hz 31.4 – 80/60 – 75 31.4 – 80/60 – 75 31.5 – 80/60 – 75 Reading angle horizontal (right/left) 80°/80° 85°/85° 88°/88° Reading angle vertical (top/bottom) 70°/70° 80°/80° 88°/88° Backlight/operating time h LED/min. 50,000 LED/min. 50,000 Tubes/min. 40,000 On-screen display (OSD) Operating buttons on the rear VGA input/DVI-D D-SUB HD 15-pole/DVI-D jack Rated voltage V (DC) 12 Power consumption (W) 15 20 40 Operating temperature/storage temperature 0°C…+50°C/ -40°C…+85°C 0°C…+50°C/ -30°C…+85°C 0°C…+50°C/ -20°C…+60°C Max. humidity during operation and storage Non-condensing 90% rel. humidity for 240 h 80% rel. humidity for 300 h at 50°C 80% relative humidity Power pack Packs of Model No. for TFT monitor ◾ With IEC 320 socket ◾ With cable (1.5 m) for connecting to the TFT monitor 1 pc(s). 6450.050 Material: – Enclosure: Plastic Dimensions, W x H x D: 107 x 30 x 59 mm Technical specifications: – Input voltage: 100 – 240 V – Output voltage: 12 V (DC) – Operating temperature: 10°C…40°C Connection cable Packs of Model No. for power pack With IEC connector at one end. 1 pc(s). 6450.060 Length: 1.5 m 706 Rittal Catalogue 34/System accessories Keyboards, supports and drawers TFT holder Suitable for mounting TFTs using VESA 75/100 adaptor up to 21˝ on ◾ Attachment CP 40, 6501.070, see page 139 ◾ Attachment CP 60, for support arm connection ▭ 120 x 65 mm, 6206.360, see page 147 ◾ Vertical support arm via tilting adaptor +100°/-60°, 6206.460, see page 147 Dimensions mm Packs of Model No. 477 x 372 x 110.5 1 pc(s). 2383.030 Technical details: Available on the Internet Material: – Sheet steel Surface finish: – Spray-finished Colour: – RAL 7024 Keyboard, pull-out with integral trackball Super-slimline keyboard with cursor keys and trackball. The handle also serves as a hand rest. The 10° angled pullout ensures ergonomic working. For installation in: ◾ Any sufficiently large surface (e.g. door, side panel) ◾ Front panels ◾ Directly in a Comfort-Panel and Optipanel of a suitable size, selectable via configurators at www.rittal.com Keyboard layout Packs of Model No. German 1 pc(s). 6002.130 Material: – Sheet steel Surface finish: – Front panel: Powder-coated Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 65 (at the front, sealed) Technical specifications: Keyboard: – 84 short-stroke keys, IBM-AT compatible (MF2), including cursor keys – With integral 16 mm trackball – Interface: 2 x USB – Operating temperature: +5°C…+50°C – Storage temperature: -10°C…+60°C – Humidity: max. 95 % (non-condensing) 8.5 16.5 (55) ° (71) 10 88 ca. 155 8.5 16.5 150 482.6 12.5 420 Mounting cut-out 155 465 ± 0.3 71 5 62 Ø M4 5 155 3 8.5 450 465 Rittal Catalogue 34/System accessories 707 Keyboards, supports and drawers Built-in keyboard 482.6 mm (19˝)/4 U with integral touchpad The integral touchpad eliminates the need to install an additional, correct protection category mouse is no longer required, and cabling is also reduced. The short stroke keys are easily identified by edge embossing, less force is required to operate them and they have good positive key actuation. Keyboard layout Packs of Model No. German 1 pc(s). 6446.030 Also required: – Mounting kit 6053.800 (when installing in Comfort Panel), see page 705 – Mounting kit 6053.500 (when installing in Optipanel), see page 705 Benefits: ◾ The separate number pad enables the parameters to be entered quickly ◾ Sealed, wipeable surface finish ◾ High level of mechanical and chemical resistance as per DIN 42 115 10 1 Technical specifications: – Number of keys: 105 – Front panel dimensions: 482.6 x 177.0 mm (19˝ x 4 U) – Installation depth: 23 mm – 12 M5 x 20 threaded bolts at the rear – Actuation travel/force: 0.3 mm/2.6 N – Service life: 3 million switching cycles – Operating temperature: -40°C…+90°C – Touchpad resolution, capacitive: 40 pixels/mm – Interfaces: USB Ø 7 101.6 145 177 10 165 420 451 482.6 Material: – Front panel: Aluminium Support surface Protection category IP to IEC 60 529: – IP 65 (at the front) Supply includes: – Y connection cable, length 1.8 m – USB connector – Seal – Drilling template – Assembly parts for surfaces Fold-out tray Accessories: for keyboard and mouse For installation in ◾ 600 and 800 mm wide doors ◾ 482.6 mm (19˝) swing frames and enclosures – Mousepad support, pull-out, see page 709 Mounting cut-out Standard double-bit lock insert which may be exchanged for lock inserts 27 mm, type A, see page 570 and for lock cylinder 2571.000, see page 571 482.6 (682.6) 454 (654) 305 Material: – Flap: Sheet steel – Side parts: Cast aluminium – Tray: Extruded aluminium section 324 195 (295) 195 (295) Surface finish: – Cover, side parts: Textured paint – Tray: Natural anodised Ø Colour: – Cover, side parts: RAL 7035 708 External dimensions W x H x D mm (6 x) Support surface Protection category IP to IEC 60 529: – IP 55 For door width mm 5. 5 1 355 (8 U) 32 Installation depth Max. keyboard size W x H x D mm mm 600 482.6 (19˝) x 355 (8 U) x 126 93 405 x 50 x 250 405 x 50 x 1951) 800 682.6 x 355 (8 U) x 126 93 605 x 50 x 250 605 x 50 x 1951) 4751) x 50 x 250 1)Maximum keyboard size with holder for mouse Model No. 2379.600 2379.800 Rittal Catalogue 34/System accessories Keyboards, supports and drawers Mousepad support, pull-out with mouse holder For screw-fastening into the fold-out tray 2379.600/ 2379.800, see page 708. To fit all standard mousepads up to 250 x 205 mm. Packs of Model No. 1 set(s) 2379.900 Packs of Model No. 1 set(s) 2383.000 Supply includes: – Assembly parts Support for keyboards for max. 473 x 210 mm. Prepared for ◾ Cable gland ◾ Mousepad support, vertically hinged 2383.020 Material: – Side parts: Sheet steel – Front and rear: Extruded aluminium section Surface finish: – Side parts: Textured paint – Front and rear: Natural anodised Also required: – For external mounting on surfaces using enclosure surface connectors, see page 703 Accessories: – Mousepad support, vertically hinged, see page 713 Colour: – Side parts: RAL 7024 Supply includes: – 2 clamping screws, end stoppers, cover plate, cable entry grommet and nylon loop tape Utility bars, vertically hinged To support standard keyboards during programming and servicing work. Mounting distance of utility bars for problem-free insertion at least 300 mm. Depth adequate for keyboards up to max. 210 mm. For mounting beneath ◾ Comfort Panel 1) ◾ Optipanel 2) ◾ any sufficiently large surface, such as: – Worktops IW – Operating housing with handle strips Packs of Model No. 1 set(s) 6514.200 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts on ◾ vertical services (doors/side panels) Min. front panel width 385 mm 2) 405 mm 1) After use, the utility bars fit securely and neatly under the mounting surface, thus giving the operator more space to move around. Rittal Catalogue 34/System accessories 709 Keyboards, supports and drawers Drawer 482.6 mm (19˝)/2 U for keyboard and mouse For installation in: ◾ Any sufficiently large surface (e.g. door, side panel) ◾ 482.6 mm (19˝) system punchings ◾ Front panels ◾ Directly in a Comfort Panel and Optipanel of a suitable size, selectable via configurators at www.rittal.com Suitable for ◾ Accommodation of keyboards up to max. 390 x 32 x 139 mm ◾ Support of standard commercially available mouse or trackball Width mm U Depth mm Model No. 482.6 (19˝) 2 150 6002.000 Material: – Drawer housing: Sheet steel – Drawer and front panel: Aluminium Surface finish: – Drawer housing: Zinc-plated – Drawer and front panel: Natural anodised Supply includes: – Assembly parts for installation in Comfort Panel/ Optipanel command panel Design: – Drawer: With stay – Front panel: With security lock (lock no. 12321) and handle strip 482.6 2 465 284 148.5 139 46 75 60 88 71.4 31 106 4.5 441 Mounting cut-out (for installation in surfaces) 390 79 77 90 139 71.4 Ø 4.5/M4 450 465 710 Rittal Catalogue 34/System accessories Keyboards, supports and drawers Drawer for keyboard and mouse with mousepad support For installation in: ◾ Any sufficiently large surface (e.g. door, side panel) ◾ Front panels Width mm U Depth mm Model No. 482.6 (19˝) 3.5 261 6003.000 Material: – Drawer and enclosure: Sheet steel – Front panel: Aluminium Surface finish: – Drawer and enclosure: Textured paint – Front panel: Natural anodised Suitable for accommodating ◾ Keyboards up to a maximum of 460 x 42 x 170 mm ◾ Standard mouse and mousepad Design: – Drawer and housing: With side pull-out mousepad support and tray – Front panel: With 3 mm double-bit lock insert, folds out as handrest Supply includes: – Assembly parts Accessories: – Standard double-bit lock insert may be exchanged for 27 mm lock inserts, type A, see page 570 260 270 472 260 Mounting cut-out for installation in surfaces 80 Ø 5.5/M5 133 475 141 206 467 1 482.6 (19˝) Keyboard drawer, 1 U for 482.6 mm (19˝) mounting level This space-saving keyboard drawer is screwfastened to the front and rear 482.6 mm (19˝) mounting angles. The installation spacing is infinitely adjustable from 460 – 800 mm. It is fully extendible, lockable, with strain relief and hinged cable support. The drawer is suitable for accommodating 482.6 mm (19˝) keyboards. Front trim panel Distance between levels mm Model No. 460 – 800 7281.200 Interior dimensions: – W x H x D approx. 420 x 40 x 220 mm Material: – Sheet steel Colour: – RAL 7035 Supply includes: – Assembly parts, excluding keyboard Note: – Monitor/keyboard unit, 1 U, see page 461 Rittal Catalogue 34/System accessories 711 Keyboards, supports and drawers Keyboard drawer, 2 U for 482.6 mm (19˝) mounting level For keyboards up to 430 mm wide and 250 mm deep with the front panel folded over. Height Packs of Model No. 2U 1 pc(s). 7281.035 Installation depth: 390 mm Material: – Sheet steel with aluminium front Surface finish: – Spray-finished Colour: – RAL 7035 Supply includes: – Lockable drawer with handles – Folding front – Pull-out mousepad – Mouse support – Practical cable entry – and strain relief Mousepad support for command panels and surfaces The angle of the mousepad support is individually adjustable. Two holes are needed on the enclosure for attachment purposes. Material: – Sheet steel Weight kg Packs of Model No. 1.0 1 pc(s). 2381.000 Accessories: – Mouse holder, see page 713 Surface finish: – Zinc-plated Supply includes: – Assembly parts 712 Rittal Catalogue 34/System accessories Keyboards, supports and drawers Mousepad support, vertically hinged For mounting on the left/right, beneath the keyboard support. Latches home automatically, both when retracted and extended. With mounting holes for mouse holder 2382.000. With cut-outs for cable routing and holes for attachment via cable ties, for fast assembly 2597.000. Packs of Model No. 1 pc(s). 2383.020 Accessories: – Mouse holder, see page 713 – Cable ties, see page 667 23 Material: – Sheet steel 44 Surface finish: – Zinc-plated Supply includes: – Assembly parts and mousepad, stuck on with adhesive 211 20 312 30 Mouse holder To fit mousepad support and for secure accommodation of a standard mouse. Weight kg Packs of Model No. 0.3 1 pc(s). 2382.000 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts Paper removal flap For installation in surfaces Facilitates easy removal of pages from the printer without opening the enclosure door. Acrylic glazed flap with magnetic lock. Rittal Catalogue 34/System accessories Also required: – Mousepad support, see page 712 or – Mousepad support, vertically hinged, see page 713 Paper removal flap Colour RAL Packs of Model No. DIN A4 7015 1 pc(s). 6903.200 713 Interfaces Base for tubular door frame The space-saving alternative instead of component shelves to accommodate tower PCs (maximum 20 kg). For screw-fastening to the tubular door frame of 600 mm wide enclosures based on TS. Width x height x depth mm Packs of Model No. 495 x 159 x 230 1 pc(s). 6902.950 Also required: – TS support strips for direct screw-fastening to the tubular door frame, see page 609 Load capacity: – 20 kg Material: – Sheet steel Surface finish: – Spray-finished Colour: – RAL 7015 Supply includes: – Retaining strap and assembly parts Interface extension with wall connection and built-in RJ 45 module Surface finish: – Enclosure: Nickel-plated – Cover: Natural anodised For extending the internal enclosure interfaces – e.g. in industrial PCs and switches – up to the outside of the enclosure. The wall connection only needs the same space as a switch. Protection category IP to IEC 60 529: – IP 66/67 (with protective cap closed) Anti-twist guard Benefits: ◾ Rapid access for maintenance work ◾ The protection category of the enclosure is preserved ◾ The lock nut cuts automatically into the sprayfinish or eloxal layer, thereby creating a conductive connection ◾ Captive protective cap Ø 22.3 Material: – Enclosure: Brass – Cover: Aluminium – Seal: Polyamide Version USB RJ 45 RJ 45 714 with (USB only) 20.8 none (USB/RJ 45) Ø 22.3 Material thickness: 1 – 6 mm Wall connection Type A jack Jack Jack Inside Type A connector Connector Jack Length m Packs of Model No. 0.5 1 pc(s). 2482.210 1.0 1 pc(s). 2482.220 2.0 1 pc(s). 2482.230 0.5 1 pc(s). 2482.700 1.0 1 pc(s). 2482.710 2.0 1 pc(s). 2482.720 – 1 pc(s). 2482.730 Rittal Catalogue 34/System accessories Interfaces Interface flaps, modular For universal use in all situations where rapid access to interfaces and sockets is needed. The affected enclosure remains closed and is therefore protected from ambient influences and unauthorised access. Space-saving installation e.g. ◾ in small enclosures and compact enclosures as a programming interface for controllers ◾ in IT and industrial distributors as maintenance access for networks ◾ in PC enclosures and console systems for the temporary connection of additional equipment ◾ in mobile Industrial Workstations for rapid connection to existing network structures ◾ in command panel systems for programming and maintenance of integral components The mounting frame has a flap which snaps into position in various stages at opening angles of 90° to 180°. A snap fastener ensures a reliable seal. This may be locked if required. Material: – Mounting frame and metal flap: Fine die-cast zinc – Plastic flap: Polycarbonate (semi-transparent) – Lock: Polycarbonate, RAL 7024 Surface finish: – Mounting frame and metal flap: Matt nickel-plated Colour: – Lock: RAL 7024 Protection category IP to IEC 60 529: – IP 65 (with sealed flap and proper assembly) Packs of Model No. Single, with plastic flap (semi-transparent) 1 pc(s). 2482.300 Double, with plastic flap (semi-transparent) 1 pc(s). 2482.310 Description Mounting cUL UL 1 2 3 4 5 6 7 8 9 10 11 12 frame1) Single, with metal flap Double, with metal flap ◾ ◾ 1 pc(s). 2482.320 ◾ ◾ 1 pc(s). 2482.330 Socket modules Germany (VDE), spring-action terminals max. 2 x 2.5 mm2, connection at rear Germany (VDE), screw terminals max. 6 mm2, connection at rear, 1 pc(s). 2482.4003) 1 pc(s). 2482.4103) Colour: yellow (RAL 1016), for installation in front of main switch Interface inserts 2 x SUB-D9 (jack/pin) ◾ ◾ 1 pc(s). 2482.500 SUB-D9 (jack/jack) ◾ ◾ 1 pc(s). 2482.510 2 x USB A (jack/jack) ◾ ◾ 1 pc(s). 2482.5402) RJ 45 (jack/jack, Cat. 5e), SUB-D9 (jack/jack), SUB-D9 (pin/pin) 2 x RJ 45 (jack/jack, Cat. 5e) USB A (jack/jack), RJ 45 (jack/jack, Cat. 5e), SUB-D9 (jack/pin) Blanking plate (slimline), for individual population, usable area: 45 x 75 mm ◾ ◾ 1 pc(s). ◾ ◾ 1 pc(s). 2482.5602) 2482.550 ◾ ◾ 1 pc(s). 2482.5702) ◾ ◾ 1 pc(s). 2482.590 1) Electrically conductive 2) Conductively connected to mounting frame 3) Rated voltage: 250 V, rated current: 10 – 16 A All SUB-D interfaces may be rotated while in use Mounting cut-out appr. 16 Interface flap, single approx. 65 91 A approx. 12 approx. 116 approx. 120 max. R2 Permissible material thickness: 1 – 5 mm open lock 52 appr. 21 appr. 7 appr. 7 A Contact surface approx. 38 Interface flap, double Mounting cut-out appr. 16 approx. 130 open open lock lock approx. 61 approx. 61 appr. 21 91 A approx. 12 approx. 12 approx. 116 approx. 120 max. R2 117 appr. 7 appr. 7 appr. 35 Rittal Catalogue 34/System accessories 715 Signal pillars Signal pillars, LED compact Benefits: ◾ Complete, ready-to-connect solution ◾ Minimal build height ◾ Extremely long LED service life (minimum 70,000 h) – therefore maintenance-free ◾ Minimal assembly work and warehousing costs Technical specifications: – Operating voltage: 24 V AC/DC – Electrical connection: Screw terminals – Light: LED – Transmission angle: 3 x 120° – Operating temperature: -20…+70°C – Flashing function: Controllable via PLC – Cable entry: Metric cable gland M12 x 1.5 for cable diameter 3.0 – 6.5 mm Version Packs of H mm Model No. 3-stage, red, amber, green 1 pc(s). 177 2372.100 1-stage, red 1 pc(s). 107 2372.130 Also required: – For wall mounting: Bracket for wall mounting, see page 720 – For conduit mounting/support arm systems: Busbar connection adaptor, see page 716 – Other mounting components, see page 720/721 Protection category IP to IEC 60 529: – IP 65 Connection plan 2372.100/.130 35 21 Ø 72 L1 L2 L3 29 54 GND – 0 V (Ground) 10 22 107 22 29 M4 10 M4 GND 35 35 177 21 35 Ø 72 L1 – L3 – +24 V DC (LED light stages, from bottom to top, unneeded contacts are left free) 54 M12 x 1.5 1 20 Mounting cut-out .5 Ø Seal Ø4 54 Connection adaptor Packs of Model No. for signal pillar, LED compact For conduit mounting and mounting on support arm systems. 1 pc(s). 2372.120 Material: – Plastic Colour: – Black Accessories: – Mounting components for conduit mounting, see page 721 – Mounting components for support arm systems, see page 720 716 Ø 54 31 Ø 25 Ø 70 Rittal Catalogue 34/System accessories Signal pillars Signal pillars, modular For modular configuration of ◾ Connection components ◾ Optical components ◾ Incandescent lamps ◾ Acoustic components ◾ Label panel Benefits: ◾ Simple assembly and contact via bayonet fastener ◾ Configuration of up to five components with the same voltage ◾ Flashing and stroboscopic light element incl. lamp, suitable for direct use ◾ Components are available in a range of colours and voltages Connection component Connection component for signal pillars, modular ◾ Optionally for conduit or wall/base mounting ◾ Screw terminals in the connection component ◾ With cover for optical components ◾ Contact hazard protection to VDE For conduit mounting 2368.000 For wall/base mounting 2368.010 Model No. Accessories: Material: – Enclosure of polyamide – Mounting components for wall/base mounting, see page 720 – Mounting components for conduit mounting, see page 721 – Mounting components for support arm systems, see page 720 Colour: – Black Protection category IP to IEC 60 529: – IP 54 Connection component For conduit mounting 2368.000 Connection component For wall/base mounting 2368.010 Connection diagram Shared conductor 4. 2 21.5 18.75 1.75 5 1 17 25 .7 Stage 4 2 3 Stage 2 Ø Ø 25 Ø 17 .7 4.2 4 Ø Stage 1 0 Stage 5 Ø 13 Ø 68.5 Ø 68.5 30 Ø 70 25 Ø 70 30 25 13 Stage 3 1 Rittal Catalogue 34/System accessories Seal 717 Signal pillars Optical components Also required: for signal pillars, modular ◾ With 360° signal transmission thanks to optimised prism system ◾ No. of potential stages = 5 components, with identical voltage – Incandescent lamps for steady light component, see page 718 A 56 65.5 Material: – Enclosure: Polyamide – Cap: Transparent polycarbonate 1 Protection category IP to IEC 60 529: – IP 54 if a cover or acoustic component is fitted at the top Ø 70 A Pre-configured seal 2 3 Steady light component 12 – 240 V AC/DC1) Model No. 1) 4 5 Red Green Amber Clear Blue 2369.000 2369.010 2369.020 2369.030 2369.040 Incandescent lamps not included with the supply LED steady light component 24 V AC/DC, 25 mA Model No. Red Green Amber Clear Blue 2372.000 2372.010 2372.020 2372.030 2372.040 LED steady light component 230 V Model No. 6 Red Green Amber Clear Blue 2370.150 2370.160 2370.170 2370.180 2370.190 7 LED flashing light component 24 V AC/DC Model No. Red Green Amber Clear Blue 2370.500 2370.510 2370.520 2370.530 2370.540 LED steady light component 230 V Model No. Red Green Amber Clear Blue 2370.550 2370.560 2370.570 2370.580 2370.590 Stroboscopic light component 24 V DC, 125 mA Model No. Red Green Amber Clear Blue 2371.000 – 2371.020 – – Stroboscopic light component 230 V DC, 15 mA Model No. Red Green Amber Clear Blue 2371.050 – 2371.070 – – Incandescent lamps for steady light components With BA 15d base/plinth. 718 Incandescent lamp Packs of Model No. 24 V, 5 W 3 pc(s). 2374.060 230 V, 5 W 3 pc(s). 2374.070 Rittal Catalogue 34/System accessories Signal pillars Acoustic components for signal pillars, modular To indicate warnings or malfunctions. Material: – Enclosure: Polyamide Colour: – Black Note: – Mounting only on the upper end of the optical components or directly on the connection component 24 V AC/DC Acoustic components Packs of Model No. 85 dB1) max. 25 mA 1 pc(s). 2376.000 1 pc(s). 2376.010 dB2) 100 max. 25 mA 1) Continuous tone or pulsating 2) Volume and 8 tones may be set 230 V Acoustic components Packs of Model No. 85 dB1) max. 25 mA 1 pc(s). 2376.020 1 pc(s). 2376.030 dB2) 100 max. 25 mA 1) Continuous tone or pulsating 2) Volume and 8 tones may be set Label panel for signal pillars, modular For text additions for a maximum of 5 optical components, with break point for any fields that are not required (50 x 150 mm), including clamping section for base or tube with a diameter of 25 mm. Label panel Model No. For 5 optical components 2374.150 Material: – Acrylic, transparent Rittal Catalogue 34/System accessories 719 Signal pillars Mounting components for wall/base mounting 1 Fig. Mounting component Colour Bracket for wall mounting, including rubber gland for concealed cable routing Black Bracket for connection component For side cable outlet Suitable for signal pillar Model No. LED compact modular ◾ – 2372.110 Black – ◾1) 2374.040 Black – ◾1) 2374.080 Also required: – 1) Connection component 2368.010, see page 717 2 Bracket for wall mounting Bracket for connection component For side cable outlet Ø 70 15 Ø 42 Ø 5.5 2 4. Ø 5.5 Ø 10.5 4 Ø 110 Ø 57 40 A 54 10 27 A Seal B B Flat seal 25 10 Ø 54 1.5 3 Ø 70 73 M16 x 1.5 50 15 76 Mounting components for support arm systems For external mounting of a signal pillar on the plastic cover of the support arm components. Fig. Mounting component for support arm system CP 40, steel – Angle piece 90° 6501.140 Colour 5 Suitable for signal pillar Model No. LED compact modular RAL 7024 (graphite grey) ◾1) ◾2) 2375.030 for support arm system CP 60 – Angle adaptor 90° for support arm combination CP 60 to CP 40 6206.640 – Angle coupling 90° 6206.380 – Angle piece 90° 6206.600 – Intermediate hinge 6206.620 – Wall-mounted hinge 6206.740 – Top-mounted joint 6206.700 RAL 7024 (graphite grey) ◾1) ◾2) 6206.900 for support arm system CP 120 – Angle coupling 90° 6212.380 – Angle piece 90° 6212.600 – Intermediate hinge 6212.620 – Wall-mounted hinge 6212.740 – Top-mounted joint 6212.700 RAL 7024 (graphite grey) ◾1) ◾2) 6212.900 for support arm system CP 180 – Angle piece 90° 6218.600 – Top-mounted joint 6218.700 RAL 7024 (graphite grey) ◾1) ◾2) 6212.900 4 Also required: 6 720 – – Connection adaptor 2372.120, see page 716 2) Connection component 2368.000, see page 717 1) Rittal Catalogue 34/System accessories Signal pillars Mounting components for conduit mounting Fig. Mounting component Colour Base with integral conduit, Ø 25 mm, 110 mm long Individual base Suitable for signal pillar Model No. LED compact modular Black ◾1) ◾2) 2374.000 Black ◾ ◾ 2374.010 2374.020 Single conduit, 250 mm long Aluminium ◾1) ◾2) Single conduit, 400 mm long Aluminium ◾1) ◾2) 2374.030 Angle bracket for conduit mounting Black ◾ ◾ 2374.050 8 Also required: – – Connection adaptor 2372.120, see page 716 2) Connection component 2368.000, see page 717 1) Base with integral conduit 9 Single conduit 25 Individual base, plastic Ø 21.7 Ø 25 10 110 250 (400) 17 37 Ø 10.5 Ø 5.5 Ø 70 Ø 54 Ø 10.5 A Ø 70 A Seal Ø 5.5 A 11 A Seal Angle bracket for conduit mounting Ø 70 36 .2 19 9 52.5 18 Ø6 57 38 Ø 12 87.5 Rittal Catalogue 34/System accessories 721 Technical information The 3-phase coating procedure Coating procedure Technical properties Technical specifications Degreasing, nanoceramic pretreatment, rinsing Used as corrosion protection and to improve paint adhesion. Nanoceramic conversion layer Anodic dipcoat priming Even layer formation on all surfaces, edges and in cavities, which produces a high level of corrosion protection even at the assembly stage. Erichsen cupping test to DIN EN ISO 1520 ≥ 4 mm Buchholz hardness to DIN EN ISO 2815 ≥ 80 Cross cutting to DIN EN ISO 2409 Gt 0 The primer is readily overpainted and free from heavy metals, chromate and silicone. Stove enamelling Textured powder-coating Powder-coating is distinguished by a high level of mechanical resistance, excellent corrosion protection, good resistance to chemicals and temperature, and its facility for decontamination. Erichsen cupping test to DIN EN ISO 1520 ≥ 3.5 mm Buchholz hardness to DIN EN ISO 2815 ≥ 80 Cross cutting to DIN EN ISO 2409 Gt 0 Salt spray test to DIN EN ISO 9227 NSS Test period: 168 hrs Condensate test to DIN EN ISO 6270-2 CH Test period: 500 hrs Condensate test to DIN EN ISO 6270-2 AHT Test period: 20 cycles The powder coating is readily overpainted and is free from heavy metals, chromate and silicone. Stove enamelling The coating is resistant to: ◾ Mineral oils ◾ Lubricants ◾ Machine emulsions ◾ Alcohol-based solvents (briefly, e.g. during cleaning) ◾ Weak acids and alkalines Primer or powder coating suitable for overpainting After careful cleaning of the surface, the standard coating may be overpainted with: ◾ DD gloss paints ◾ Single and dual-component gloss paints ◾ Car repair paints ◾ Powder paints ◾ Water-based paints Outdoor use of enclosures In order to guarantee satisfactory long-term function of enclosures in outdoor use, the relevant environmental factors must be taken into account. These include: ◾ UV radiation, the corrosive action of air pollution, rain, icing, snow, wind or other factors in special climatic conditions. 722 If in doubt, perform a compatibility test. Always follow the paint manufacturer’s instructions. When overpainting, take care not to exceed 180°C and a baking time of 15 minutes. Condensation inside the enclosure Condensation must be prevented by means of appropriate measures, e.g. by venting or heating the enclosure. Protection category The enclosure may be exposed to extreme weather conditions during outdoor use. Long periods of rain, snow, ice, high winds and temperature fluctuations place particularly high demands on the enclosure sealing. The protection category IP X3 as envisaged for external weather conditions in DIN VDE 0100, part 737, point 5.2 is often insufficient to provide permanent protection for electrical equipment. Rittal Catalogue 34/Technical Information Technical information Protection categories to IEC 60 529 (EN 60 529) The IP protection category is characterised by 2 numbers. Example of a protection category, e.g. IP 43: Code letters IP First numeral Second numeral Degrees of protection for protection against contact and foreign bodies: First numeral Explanation Second numeral Degree of protection Description Description Explanation Protected against solid foreign objects with a diameter of 50 mm and greater The object probe, a sphere 50 mm in diameter, must not penetrate fully1). Protected against water drops Vertically falling water drops must not cause any harmful effects. Protected against solid foreign objects with a diameter of 12.5 mm and greater The object probe, a sphere 12.5 mm in diameter, must not penetrate fully1). The articulated test finger may penetrate up to its length of 80 mm, but adequate distance from hazardous parts must be adhered to. Protected against vertically falling water drops when the enclosure is tilted up to 15° Vertically falling drops must not have any harmful effects when the enclosure is tilted up to 15° on either side of the vertical. Protected against solid foreign objects with a diameter of 2.5 mm and greater The object probe, a sphere 2.5 mm in diameter, must not penetrate at all1). Protected against sprayed water Water sprayed at an angle of up to 60° on either side of the vertical shall have no harmful effects. Protected against solid foreign objects with a diameter of 1.0 mm and greater The object probe, a sphere 1.0 mm in diameter, must not penetrate at all1). Protected against splashed water Water splashed on the enclosure from any direction shall have no harmful effects. Dust-proof The ingress of dust is not fully prevented, but dust may not enter to such an extent as to impair satisfactory operation of the device or safety. Protected against water jets Water directed at the enclosure from any direction in a jet shall have no harmful effects. Dust-tight No ingress of dust at a partial vacuum of 20 mbar inside the enclosure. Protected against powerful water jets Water directed at the enclosure from any direction in a powerful jet shall have no harmful effects. Protected against temporary immersion in water Water must not ingress to such an extent as to cause harmful effects when the enclosure is temporarily immersed in water under standardised pressure and time conditions. Protected against continuous immersion in water Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is continuously immersed in water under conditions to be agreed between the manufacturer and the user. However, the conditions must be more difficult than for numeral 7. Water with high-pressure/ steam-jet cleaning Water directed at the enclosure from every direction under greatly increased pressure must not have any adverse effects. First numeral 1) Degree of protection Degrees of protection for protection against water: Second numeral The full diameter of the object probe must not pass through an opening of the enclosure Rittal Catalogue 34/Technical Information 723 Technical information NEMA The National Electrical Manufacturers Association (NEMA) is a standards organisation in Washington, USA, which publishes a number of technical standards but does not test or certify products itself. The following NEMA classification outlines the protection of individuals from accidental contact with equipment and the protection of an enclosure from external factors. Further information on protection categories may be found on the Internet at: www.rittal.com UL/NEMA Type Intended use and description 1 Enclosures for use predominantly indoors Protection against the penetration of foreign bodies 3 Enclosures for use predominantly outdoors Protection from rain, hail, dust, icing and the damage caused by icing 3R Enclosures for use predominantly outdoors Protection from rain, hail, icing and the damage caused by icing 3S Enclosures for use predominantly outdoors Protection from rain, hail and dust External mechanisms remain usable despite being coated in ice 4 Enclosures for indoor or outdoor use Protection against rain, foreign bodies, splashed water and hosed water and against damage caused by icing on the exterior of the enclosure 4X Enclosures for indoor or outdoor use Protection against rain, foreign bodies, splashed water and hosed water and against damage caused by icing on the exterior of the enclosure Increased protection from corrosion 12, 12K Enclosures for use predominantly indoors Protection against dust deposits, foreign bodies and non-corrosive dripping liquids 13 Enclosures for use predominantly indoors Protection against dust deposits, sprayed water, oil, and non-corrosive coolants The UL/NEMA classifications are not directly comparable with IP protection categories, since both the test conditions and the evaluation of the test results are different Approvals and permits Product certifications and approvals are pivotal to the global acceptance of industrial products. Rittal products meet the highest internationally recognised quality yardsticks. All components are subjected to the most stringent testing in accordance with international standards and regulations. The consistently high product quality is ensured by a comprehensive quality management system. Regular production inspections by external test institutes also guarantee compliance with global standards. Earthing The PE conductor connection must be designed by the manufacturer of switchgear in accordance with the relevant VDE and/or local regulations. The enclosure packs generally contain earthing materials (screws, nuts, washers). The assembly instructions contain recommendations on installing a protective earth. The pre-assembled earth straps, available as accessories in various cross-sections and lengths, are intended to make assembly of a PE conductor easier. 724 A precise allocation of products to marks of conformity can be found on our product and service pages on the Internet. www.rittal.com Further information can be found in our technical documentation “PE conductor connection, current carrying capacity”. Rittal Catalogue 34/Technical Information List of model numbers 1001.600 to 2384.040 Page Model No. Page Model No. Page Model No. 1001.600 AE 179 1360.500 AE 48 1534.510 KL 33 1592.000 KL 574 2310.100 SZ 576 2370.180 SZ 1002.500 AE 179 1376.500 AE 48 1535.510 KL 32 1592.010 KL 574 2310.120 SZ 576 2370.190 SZ 718 1002.600 AE 179 1380.500 AE 47 1536.510 KL 32 1594.000 KL 587 2311.225 SZ 575 2370.500 SZ 718 Model No. Page Model No. Page Model No. Page 718 1003.600 AE 179 1400.500 KS 53 1537.510 KL 33 1605.520 BG 37 2311.250 SZ 575 2370.510 SZ 718 1004.600 AE 179 1423.500 KS 52 1538.510 KL 33 1606.520 BG 37 2313.150 SZ 614 2370.520 SZ 718 1005.500 AE 180 1432.500 KS 52 1539.510 KL 32 1609.510 BG 37 2313.750 SZ 614 2370.530 SZ 718 1005.600 AE 180 1434.500 KS 52 1540.510 KL 33 1611.510 BG 37 2314.000 SZ 614 2370.540 SZ 718 1006.500 AE 180 1444.500 KS 52 1541.510 KL 33 1670.600 HD 170 2315.000 SZ 614 2370.550 SZ 718 1006.600 AE 180 1446.500 KS 52 1542.510 KL 33 1671.600 HD 170 2316.000 SZ 614 2370.560 SZ 718 1007.600 AE 180 1448.500 KS 52 1545.500 EB 34 1672.600 HD 170 2317.000 SZ 614 2370.570 SZ 718 1008.600 AE 180 1449.500 KS 52 1546.500 EB 34 1674.600 HD 170 2318.000 SZ 614 2370.580 SZ 718 1009.600 AE 180 1453.500 KS 52 1547.500 EB 34 1675.600 HD 170 2319.000 SZ 614 2370.590 SZ 718 1010.500 AE 180 1454.500 KS 53 1548.500 EB 35 1676.600 HD 170 2322.700 SR 679 2371.000 SG 718 1010.600 AE 180 1466.500 KS 53 1549.500 EB 35 1931.200 EL 692 2323.235 SR 680 2371.020 SG 718 1011.600 AE 179 1467.500 KS 53 1550.500 EB 35 1932.200 EL 692 2324.235 SR 680 2371.050 SG 718 1012.600 AE 180 1468.500 KS 53 1551.500 EB 34 1933.200 EL 692 2325.000 SZ 575 2371.070 SG 718 1013.600 AE 180 1469.500 KS 53 1552.500 EB 34 1934.200 EL 692 2326.000 SZ 575 2372.000 SG 718 1014.600 AE 181 1479.500 KS 53 1553.500 EB 35 1935.200 EL 692 2327.000 SZ 575 2372.010 SG 718 1015.600 AE 180 1480.500 KS 53 1554.500 EB 35 1936.200 EL 692 2328.000 SZ 575 2372.020 SG 718 1016.600 AE 181 1481.000 KS 594 1555.500 EB 35 1937.200 EL 692 2331.700 SR 679 2372.030 SG 718 1017.600 AE 181 1482.000 KS 625 1556.500 EB 35 1939.200 EL 692 2332.235 SR 680 2372.040 SG 718 1950.000 1018.600 AE 181 1483.010 KS 588 1557.500 EB 35 EL 692 2334.000 SZ 644 2372.100 SZ 716 1019.500 AE 181 1484.000 KS 569 1558.010 BG 178 1962.200 SR 681 2335.000 SZ 644 2372.110 SG 720 1019.600 AE 181 1484.001 KS 569 1558.510 BG 37 1963.200 SR 681 2336.700 SR 679 2372.120 SG 716 1030.500 AE 46 1486.000 KS 570 1559.010 BG 178 1979.200 SR 681 2337.235 SR 680 2372.130 SZ 716 1031.500 AE 47 1488.000 KS 570 1559.510 BG 37 1980.200 SR 681 2338.235 SR 680 2373.000 SZ 623 1032.500 AE 46 1490.010 KS 568 1560.700 KL 591 1994.835 SR 679 2340.700 SR 679 2374.000 SG 721 1033.500 AE 46 1491.000 KS 594 1561.700 KL 591 1995.235 SR 680 2341.235 SR 680 2374.010 SG 721 1034.500 AE 46 1492.000 KS 570 1562.700 KL 591 1995.835 680 2342.235 SR 680 2374.020 SG 721 SZ 1035.500 AE 46 1500.510 KL 31 1563.700 KL 591 1996.535 SR 679 2343.000 SZ 644 2374.030 SG 721 1036.500 AE 46 1501.510 KL 31 1564.700 KL 591 1996.835 SR 679 2345.700 SR 679 2374.040 SG 720 1037.500 AE 47 1502.510 KL 31 1565.700 KL 591 1997.235 SR 680 2346.235 SR 680 2374.050 SG 721 1038.500 AE 47 1503.510 KL 31 1566.700 KL 591 1997.835 680 2347.235 SR 680 2374.060 SG 718 SZ 1039.500 AE 47 1504.510 KL 31 1567.700 KL 591 2026.200 SR 681 2350.000 SZ 665 2374.070 SG 718 1045.500 AE 47 1505.510 KL 31 1568.700 KL 591 2027.200 SR 681 2351.000 SZ 665 2374.080 SG 720 1050.500 AE 47 1506.510 KL 31 1569.700 KL 591 2034.200 SR 681 2352.000 SZ 665 2374.150 SG 719 1054.500 AE 48 1507.510 KL 31 1570.700 KL 591 2092.200 EL 694 2353.000 SZ 665 2375.030 SG 720 1055.500 AE 48 1508.510 KL 31 1571.700 KL 591 2092.300 EL 694 2354.000 SZ 665 2376.000 SG 719 1057.500 AE 47 1509.510 KL 31 1572.700 KL 591 2092.500 EL 694 2355.000 SZ 665 2376.010 SG 719 1058.500 AE 48 1510.510 KL 31 1573.700 KL 591 2094.200 EL 694 2356.000 SZ 665 2376.020 SG 719 1060.500 AE 47 1511.510 KL 31 1574.700 KL 591 2094.300 EL 694 2357.000 SZ 665 2376.030 SG 719 678 1073.500 AE 48 1512.510 KL 31 1575.700 KL 591 2094.400 DK 695 2358.000 SZ 665 2377.030 SR 1076.500 AE 48 1513.510 KL 31 1576.700 KL 591 2094.500 EL 694 2359.000 SZ 665 2377.060 SR 678 1077.500 AE 48 1514.510 KL 30 1577.450 BG 38 2203.400 IN 667 2360.000 SZ 665 2377.090 SR 678 1090.500 AE 48 1515.510 KL 30 1577.500 EB 35 2231.000 EL 692 2361.000 SZ 580 2377.120 SR 678 1100.500 AE 49 1516.510 KL 30 1577.530 BG 38 2232.000 EL 692 2362.000 SZ 580 2377.150 SR 678 1110.500 AE 49 1517.510 KL 30 1578.450 BG 38 2233.000 EL 692 2363.000 SZ 580 2377.180 SR 678 1114.500 AE 49 1518.510 KL 30 1578.500 EB 35 2243.605 EL 102 2364.000 SZ 646 2377.860 SR 678 1130.500 AE 49 1519.510 KL 31 1578.530 BG 38 2246.605 EL 102 2365.000 SZ 623 2377.880 SR 678 1158.500 KL 656 1521.010 KL 177 1579.450 BG 39 2249.605 EL 102 2366.000 SZ 623 2379.600 SZ 708 1180.500 AE 48 1522.010 KL 177 1579.500 EB 35 2252.605 EL 102 2367.040 SZ 642 2379.800 SZ 708 1199.100 SZ 548 1523.010 KL 177 1579.530 BG 39 2253.605 EL 102 2367.060 SZ 642 2379.900 SZ 709 1213.500 AE 49 1524.010 KL 177 1580.000 KL 587 2255.605 EL 103 2367.080 SZ 642 2381.000 SM 712 1260.500 AE 48 1525.010 KL 177 1581.000 KL 653 2256.605 EL 102 2367.120 SZ 642 2382.000 SM 713 1280.500 AE 48 1526.010 KL 177 1581.100 KL 655 2259.605 EL 102 2367.160 SZ 642 2383.000 SM 709 1302.600 HD 171 1527.010 KL 177 1582.000 KL 653 2261.605 EL 103 2367.200 SZ 642 2383.010 SM 703 1306.600 HD 171 1527.510 KL 31 1583.010 BG 178 2262.605 EL 103 2368.000 SG 717 2383.020 SM 713 1307.600 HD 171 1528.010 KL 177 1583.520 BG 36 2265.605 EL 103 2368.010 SG 717 2383.030 SM 707 1308.600 HD 171 1528.510 KL 30 1584.010 BG 178 2271.605 EL 103 2369.000 SG 718 2383.210 SZ 605 2304.000 1310.600 HD 171 1529.010 KL 177 1584.520 BG 36 1316.600 HD 171 1529.510 KL 31 1585.010 BG 178 SZ 570 2369.010 SG 718 2383.250 SZ 605 2304.010 HD 172 2369.020 SG 718 2383.300 SZ 605 1317.600 HD 171 1530.010 KL 177 1585.520 BG 36 2305.000 SZ 558 2369.030 SG 718 2383.350 SZ 605 1320.600 HD 171 1530.510 KL 32 1586.520 BG 36 2307.000 SZ 570 2369.040 SG 718 2384.010 SM 176 1338.500 AE 47 1531.510 KL 32 1589.510 KL 31 2308.000 SZ 573 2370.150 SZ 718 2384.020 SM 176 1339.500 AE 47 1532.510 KL 32 1590.000 KL 587 2309.000 SZ 614 2370.160 SZ 718 2384.030 SM 176 1350.500 AE 47 1533.510 KL 32 1591.000 KL 574 2310.076 SZ 576 2370.170 SZ 718 2384.040 SM 176 Rittal Catalogue 34 725 List of model numbers 2388.000 to 3145.000 Model No. Page Model No. Page Model No. Page Model No. Page Model No. Page Model No. 2388.000 SZ 641 2418.000 SZ 572 2482.710 SZ 714 2546.000 SZ 573 2735.250 FT 556 2892.000 SZ Page 2388.100 SZ 641 2419.000 SZ 572 2482.720 SZ 714 2547.000 SZ 573 2735.500 FT 556 2899.200 SZ 662 2388.120 SZ 641 2420.000 SZ 570 2482.730 SZ 714 2548.000 SZ 573 2735.510 FT 556 2899.250 SZ 662 516 2388.150 SZ 641 2422.000 SZ 586 2483.000 SZ 570 2549.000 SZ 573 2735.520 FT 556 2899.320 SZ 662 2388.200 SZ 641 2423.000 SZ 586 2484.000 SZ 570 2549.500 SZ 573 2735.530 FT 556 2899.400 SZ 662 2388.280 SZ 641 2424.100 SZ 581 2485.000 SZ 569 2549.510 HD 172 2735.540 FT 556 2907.000 SO 518 2388.600 SZ 641 2425.100 SZ 581 2485.100 SZ 569 2549.600 HD 172 2735.560 FT 556 2908.000 SO 518 2388.800 SZ 641 2426.100 SZ 581 2486.300 SZ 625 2559.000 SZ 644 2735.570 FT 556 2913.000 SO 518 2389.000 SZ 701 2426.500 SZ 581 2486.500 SZ 625 2560.010 SZ 653 2735.580 FT 556 3020.500 SV 295 2400.000 SZ 660 2427.100 SZ 581 2487.000 SZ 625 2560.400 SZ 656 2735.590 FT 556 3031.000 SV 251 2400.300 SZ 662 2430.000 SZ 570 2488.000 SZ 625 2561.010 SZ 653 2736.500 FT 556 3032.000 SV 251 2400.500 SZ 662 2432.000 SM 574 2489.000 SZ 625 2561.100 SZ 655 2736.510 FT 556 3052.000 SV 278 2400.900 SZ 661 2433.000 SZ 587 2489.500 SZ 625 2561.400 SZ 656 2736.520 FT 556 3055.000 SV 278 2400.910 SZ 661 2433.500 SZ 587 2493.000 SZ 571 2561.500 SZ 654 2736.530 FT 556 3056.000 SV 278 2400.920 SZ 661 2435.000 SZ 568 2493.500 SZ 572 2562.010 SZ 653 2736.540 FT 556 3057.000 SV 278 2400.930 SZ 661 2436.735 SZ 536 2501.500 SZ 580 2562.100 SZ 655 2740.000 FT 559 3071.000 SV 263 2400.940 SZ 661 2438.735 SZ 536 2502.500 SZ 580 2562.400 SZ 656 2741.000 FT 559 3073.000 SV 278 2400.950 SZ 661 2440.735 SZ 536 2503.010 SZ 587 2562.500 SZ 654 2742.000 FT 559 3074.000 SV 278 2400.960 SZ 661 2446.000 SZ 576 2504.000 SZ 625 2563.010 SZ 653 2743.000 FT 559 3075.000 SV 278 2400.970 SZ 661 2449.000 SZ 574 2504.500 SZ 625 2563.100 SZ 655 2744.000 FT 559 3076.000 SV 278 2401.000 SZ 540 2452.000 SZ 568 2504.800 SZ 625 2563.150 SZ 656 2745.000 FT 559 3079.000 SV 255 2402.000 SZ 540 2453.000 SZ 568 2505.510 SZ 588 2563.500 SZ 654 2746.000 FT 559 3079.010 SV 255 2403.000 SZ 558 2455.010 SZ 568 2506.100 SZ 424 2564.000 SZ 644 2749.000 FT 559 3083.000 SV 279 2404.000 SZ 558 2456.500 SZ 568 2507.100 SZ 639 2565.000 SZ 644 2760.000 FT 557 3085.000 SV 253 2410.000 HD 659 2459.000 SZ 533 2507.200 SZ 639 2565.100 SZ 644 2761.000 FT 557 3086.000 SV 257 2410.010 HD 659 2459.500 SZ 533 2507.300 SZ 639 2565.110 SZ 644 2762.000 FT 557 3087.000 SV 257 2410.020 HD 659 2460.000 SZ 570 2507.400 SZ 639 2565.120 SZ 644 2763.000 FT 557 3088.000 SV 257 2410.030 HD 659 2460.650 SZ 570 2507.500 SZ 639 2566.000 SZ 644 2772.000 FT 557 3090.000 SV 257 2410.110 HD 659 2461.000 SZ 570 2508.010 SZ 587 2567.000 SZ 644 2780.000 FT 557 3091.000 SV 257 2410.120 HD 659 2462.000 SZ 570 2508.100 SZ 587 2568.000 SZ 644 2781.000 FT 557 3092.000 SV 253 2410.130 HD 659 2463.000 SZ 570 2509.000 SZ 586 2569.000 SZ 644 2782.000 FT 557 3093.010 SV 262 2410.200 HD 659 2464.000 SZ 570 2509.500 CM 586 2570.000 SZ 644 2784.000 FT 557 3093.020 SV 262 2410.210 HD 659 2465.000 SZ 570 2510.000 SZ 577 2570.100 SZ 646 2785.000 FT 557 3105.310 SK 366 2410.220 HD 659 2466.000 SZ 570 2511.500 SZ 580 2570.200 SZ 644 2786.000 FT 557 3105.320 SK 366 2410.230 HD 659 2467.000 SZ 565 2512.000 SZ 577 2570.500 SZ 645 2787.000 FT 557 3105.330 SK 366 2410.290 HD 659 2468.000 SZ 565 2513.000 SZ 577 2571.000 SZ 571 2788.000 FT 557 3105.340 SK 366 2411.600 SZ 658 2469.000 SZ 565 2514.000 SZ 577 2572.000 SZ 569 2789.000 FT 557 3105.350 SK 366 2411.610 SZ 658 2470.000 SZ 580 2514.500 SZ 577 2573.000 SZ 652 2791.000 FT 559 3105.360 SK 366 2411.620 SZ 658 2471.000 SZ 580 2514.600 SZ 577 2574.000 SZ 623 2792.000 FT 559 3105.370 SK 366 2411.630 SZ 658 2472.000 SZ 580 2514.800 SZ 577 2575.000 SZ 569 2793.560 FT 558 3105.380 SK 367 2411.640 SZ 658 2473.000 SZ 580 2515.000 SZ 577 2576.000 SZ 569 2796.000 FT 557 3105.390 SK 367 2411.650 SZ 658 2474.000 SZ 580 2519.000 SZ 578 2581.000 SZ 536 2801.200 SO 519 3105.400 SK 367 2411.660 SZ 658 2475.000 SZ 580 2519.200 CM 578 2583.010 SZ 588 2802.200 SO 519 3105.410 SK 367 2411.670 SZ 658 2476.000 SZ 572 2520.000 SZ 570 2584.000 SZ 589 2807.200 SO 519 3105.420 SK 367 2411.800 SZ 658 2477.000 SZ 540 2521.000 SZ 573 2589.000 SZ 666 2816.200 SO 519 3105.430 SK 367 2411.810 SZ 658 2478.000 SZ 540 2522.000 SZ 570 2590.000 SZ 666 2817.000 SO 516 3108.024 SK 373 2411.820 SZ 658 2479.000 SZ 540 2523.000 SZ 570 2591.000 SZ 666 2818.200 SO 519 3108.100 SK 373 2411.830 SZ 658 2480.000 SZ 540 2525.000 SZ 571 2592.000 SZ 666 2819.000 SO 516 3108.115 SK 373 2411.840 SZ 658 2481.000 SZ 540 2526.000 SZ 570 2593.000 SZ 666 2819.200 SZ 516 3110.000 SK 379 2411.850 SZ 658 2482.210 SZ 714 2527.000 SZ 570 2594.000 SZ 666 2826.200 SO 519 3110.200 SK 380 2411.860 SZ 658 2482.220 SZ 714 2528.000 SZ 570 2595.000 SZ 666 2828.200 SO 519 3114.200 SK 379 2411.870 SZ 658 2482.230 SZ 714 2530.000 SZ 570 2596.000 SZ 666 2843.160 642 3118.000 SK 380 SZ 2412.210 SZ 644 2482.300 SZ 715 2531.000 SZ 573 2597.000 SZ 667 2843.200 SZ 642 3120.200 SK 381 2412.216 SZ 644 2482.310 SZ 715 2532.000 SZ 573 2599.000 SZ 569 2843.250 SZ 642 3121.000 SK 385 2412.225 SZ 644 2482.320 SZ 715 2533.000 SZ 569 2683.600 AP 186 2843.320 SZ 642 3124.100 SK 382 2412.310 SZ 644 2482.330 SZ 715 2534.100 SZ 571 2684.600 AP 186 2843.400 SZ 642 3124.200 SK 381 2412.316 SZ 644 2482.400 SZ 715 2534.500 SZ 571 2685.600 AP 186 2843.500 SZ 642 3126.100 SK 329 2412.325 SZ 644 2482.410 SZ 715 2535.000 SZ 569 2686.600 AP 186 2843.630 SZ 642 3126.230 SK 469 2413.375 SZ 642 2482.500 SZ 715 2536.000 SZ 569 2694.500 TP 116 2859.000 SO 521 3126.240 SK 469 2413.550 SZ 642 2482.510 SZ 715 2537.000 SZ 567 2695.500 TP 116 2865.000 SO 519 3126.270 SK 471 2414.000 SM 642 2482.540 SZ 715 2537.010 SZ 567 2696.500 AP 116 2867.000 SO 519 3127.100 SK 329 2414.500 SM 642 2482.550 SZ 715 2540.500 SZ 570 2730.000 557 2869.000 SO 519 3128.100 SK 329 2415.000 FT SZ 642 2482.560 SZ 715 2541.235 SK 373 2731.000 FT 557 2870.000 SO 519 3129.100 SK 329 2415.100 SM 579 2482.570 SZ 715 2542.235 SK 373 2732.000 FT 557 2889.000 SO 520 3130.100 SK 329 2415.500 SM 595 2482.590 SZ 715 2543.235 SK 373 2733.000 FT 557 2890.000 SO 520 3144.000 SK 328 2416.000 572 2482.700 SZ 714 2545.000 573 2734.000 FT 557 2891.000 516 3145.000 SK 328 726 SZ SZ SZ Rittal Catalogue 34 List of model numbers 3148.007 to 3577.005 Model No. Page Model No. Page Model No. Page Model No. Page Model No. Page Model No. Page 3148.007 SK 325 3232.861 SK 443 3245.080 SK 372 3302.310 SK 335 3334.660 SK 362 3386.640 SK 349 3149.007 SK 325 3232.871 SK 443 3245.500 SK 320 3303.500 SK 337 3335.790 RK 364 3387.540 SK 349 349 3149.410 SK 324 3232.881 SK 443 3245.510 SK 320 3303.504 SK 344 3335.830 RK 364 3387.640 SK 3149.420 SK 324 3232.891 SK 442 3245.600 SK 322 3303.510 SK 337 3335.840 RK 364 3418.010 SV 236 3149.440 SK 324 3235.440 SK 380 3248.000 SK 330 3303.514 SK 344 3335.850 RK 364 3418.020 SV 262 3149.810 SK 324 3235.450 SK 381 3273.500 SK 348 3303.600 SK 337 3335.860 RK 365 3418.030 SV 262 3149.820 SK 324 3236.124 SK 373 3273.515 SK 348 3304.500 SK 339 3335.870 RK 365 3418.040 SV 236 3149.840 SK 324 3237.020 SK 372 3284.210 SK 370 3304.504 SK 344 3335.880 RK 365 3427.010 SV 236 3159.100 SK 385 3237.060 SK 372 3286.110 SK 369 3304.510 SK 339 3335.890 RK 365 3427.020 SV 262 3164.230 SK 437 3237.066 SK 371 3286.120 SK 370 3304.540 SK 339 3340.230 SK 326 3427.030 SV 262 3164.620 SK 437 3237.080 SK 372 3286.300 SK 369 3304.544 SK 344 3341.115 SK 326 3427.040 SV 236 3165.230 SK 439 3237.100 SK 316 3286.310 SK 370 3304.600 SK 339 3341.230 SK 326 3431.000 SV 238 3165.630 SK 439 3237.110 SK 316 3286.400 SK 369 3304.640 SK 339 3342.024 SK 326 3431.020 SV 239 3165.830 SK 439 3237.124 SK 316 3286.410 SK 370 3305.500 SK 340 3342.230 SK 326 3431.030 SV 239 3169.007 SK 325 3237.200 SK 372 3286.500 SK 369 3305.504 SK 344 3342.500 SK 326 3431.035 SV 239 3171.100 SK 371 3237.600 SK 321 3286.510 SK 370 3305.510 SK 340 3350.230 SK 327 3433.010 SV 236 3171.105 SK 371 3238.020 SK 372 3286.520 SK 370 3305.540 SK 340 3351.230 SK 327 3433.020 SV 262 3172.100 SK 371 3238.055 SK 371 3286.530 SK 370 3305.544 SK 344 3352.230 SK 327 3433.030 SV 262 3172.105 SK 371 3238.060 SK 372 3286.540 SK 370 3305.600 SK 340 3352.500 SK 327 3433.040 SV 236 3173.100 SK 371 3238.066 SK 371 3286.550 SK 370 3305.640 SK 340 3355.100 SK 384 3439.010 SV 217 3173.105 SK 371 3238.080 SK 372 3286.600 SK 369 3307.700 SK 350 3357.100 SK 384 3450.500 SV 257 3174.000 SK 371 3238.100 SK 316 3286.610 SK 370 3307.740 SK 350 3359.500 SK 347 3451.500 SV 257 3175.000 SK 373 3238.110 SK 316 3286.700 SK 384 3310.700 SK 350 3359.510 SK 347 3452.500 SV 257 3176.000 SK 372 3238.124 SK 316 3286.780 SK 376 3310.740 SK 350 3359.540 SK 347 3453.500 SV 257 3177.000 SK 369 3238.200 SK 372 3286.800 SK 384 3311.011 SK 434 3359.600 SK 347 3454.500 SV 257 3181.100 SK 371 3238.500 SK 319 3286.840 SK 374 3311.030 SK 433 3360.100 SK 363 3455.500 SV 257 3182.100 SK 371 3238.600 SK 321 3286.850 SK 375 3311.040 SK 433 3360.250 SK 363 3456.500 SV 257 3183.100 SK 371 3239.020 SK 372 3286.860 SK 375 3311.080 SK 433 3361.500 SK 338 3457.500 SV 257 3201.050 SK 371 3239.060 SK 372 3286.870 SK 374 3311.130 SK 428 3361.510 SK 338 3458.500 SV 257 3201.070 SK 382 3239.066 SK 371 3286.880 SK 376 3311.230 SK 428 3361.540 SK 338 3459.500 SV 257 3201.200 SK 334 3239.080 SK 372 3286.900 SK 384 3311.260 SK 428 3361.600 SK 338 3460.500 SV 257 3201.300 SK 334 3239.100 SK 317 3286.970 SK 374 3311.320 SK 434 3363.100 SK 354 3504.000 SV 254 3201.900 SK 378 3239.110 SK 317 3286.980 SK 376 3311.360 SK 433 3363.500 SK 354 3505.000 SV 254 3201.960 SK 382 3239.124 SK 317 3286.990 SK 374 3311.410 SK 431 3364.100 SK 355 3509.000 SV 253 3201.970 SK 382 3239.200 SK 372 3300.040 SK 351 3311.420 SK 431 3364.500 SK 355 3514.000 SV 254 3209.100 SK 359 3239.500 SK 319 3300.050 SK 351 3311.430 SK 432 3364.504 SK 355 3515.000 SV 254 3209.500 SK 359 3239.600 SK 321 3300.060 SK 351 3311.440 SK 432 3366.500 SK 343 3516.000 SV 253 3209.504 SK 359 3240.020 SK 372 3300.070 SK 351 3311.530 SK 429 3366.540 SK 343 3524.000 SV 253 3210.100 SK 359 3240.060 SK 372 3300.080 SK 351 3311.540 SK 429 3373.100 SK 356 3525.000 SV 253 3210.500 SK 359 3240.066 SK 371 3300.090 SK 351 3311.560 SK 429 3373.500 SK 356 3525.010 SV 253 3210.504 SK 359 3240.080 SK 372 3300.110 SK 351 3318.600 SK 361 3374.100 SK 356 3526.000 SV 253 3212.024 SK 354 3240.100 SK 317 3300.120 SK 351 3318.610 SK 361 3374.500 SK 357 3527.000 SV 253 3212.115 SK 354 3240.110 SK 317 3300.239 DK 430 3319.600 SK 361 3374.504 SK 356 3528.000 SV 253 3212.230 SK 354 3240.124 SK 317 3301.320 SK 433 3319.610 SK 361 3375.100 SK 357 3528.010 SV 253 3213.310 SK 376 3240.200 SK 372 3301.370 SK 433 3320.600 SK 362 3375.500 SK 357 3529.000 SV 253 3213.320 SK 376 3240.500 SK 319 3301.380 SK 433 3321.700 SK 371 3375.504 SK 357 3548.000 SV 258 3213.330 SK 376 3240.600 SK 321 3301.390 SK 433 3321.705 SK 371 3377.000 SK 383 3549.000 SV 258 3214.100 SK 355 3241.100 SK 317 3301.421 SK 433 3322.700 SK 371 3378.200 SK 360 3550.000 SV 257 3215.100 SK 356 3241.110 SK 317 3301.500 SK 377 3322.705 SK 371 3378.280 SK 360 3554.000 SV 257 3216.480 SK 358 3241.124 SK 317 3301.505 SK 377 3328.500 SK 341 3382.500 SK 346 3555.000 SV 257 3232.701 SK 441 3241.500 SK 319 3301.600 SK 377 3328.504 SK 345 3382.510 SK 346 3559.000 SV 257 3232.711 SK 441 3241.600 SK 322 3301.606 SK 377 3328.510 SK 341 3382.600 SK 346 3560.000 SV 257 3232.721 SK 441 3243.020 SK 372 3301.608 SK 377 3328.540 SK 341 3383.500 SK 347 3561.000 SV 257 3232.731 SK 441 3243.060 SK 372 3301.610 SK 377 3328.544 SK 345 3383.510 SK 347 3562.000 SV 257 3232.741 SK 441 3243.066 SK 371 3301.612 SK 377 3328.600 SK 341 3383.540 SK 347 3563.000 SV 257 3232.751 SK 442 3243.080 SK 372 3301.800 IT 436 3328.640 SK 341 3383.600 SK 347 3565.005 SV 255 3232.761 SK 442 3243.100 SK 317 3301.930 SK 378 3329.500 SK 342 3384.500 SK 348 3568.005 SV 255 3232.771 SK 442 3243.110 SK 317 3301.940 SK 378 3329.504 SK 345 3384.510 SK 348 3569.005 SV 255 3232.781 SK 442 3243.200 SK 372 3301.950 SK 378 3329.510 SK 342 3384.540 SK 348 3570.005 SV 255 3232.791 SK 442 3243.500 SK 320 3301.955 SK 378 3329.540 SK 342 3384.600 SK 348 3571.005 SV 255 3232.801 SK 442 3243.600 SK 322 3301.960 SK 378 3329.544 SK 345 3385.500 SK 348 3572.005 SV 255 3232.811 SK 442 3244.100 SK 318 3301.965 SK 378 3329.600 SK 342 3385.510 SK 348 3573.005 SV 255 3232.821 SK 442 3244.110 SK 318 3302.100 SK 336 3329.640 SK 342 3385.540 SK 348 3574.005 SV 255 3232.831 SK 442 3244.140 SK 318 3302.110 SK 336 3332.540 SK 342 3385.600 SK 348 3575.005 SV 255 3232.841 SK 443 3244.500 SK 320 3302.200 SK 336 3332.640 SK 342 3385.640 SK 348 3576.005 SV 255 3232.851 SK 443 3244.600 SK 322 3302.300 SK 335 3334.600 SK 362 3386.540 SK 349 3577.005 SV 255 Rittal Catalogue 34 727 List of model numbers 3578.005 to 6013.000 Model No. Page Model No. Page Model No. 3578.005 SV 255 4140.220 SZ Page 636 Model No. 4319.200 PS 667 4911.000 TS 541 5110.500 CM 50 5502.225 DK 675 3579.005 SV 255 4140.810 SZ 637 4320.700 650 4911.100 TS 541 5111.500 CM 50 5502.235 DK 675 TS Page Model No. Page Model No. Page 3580.000 SV 252 4140.820 SZ 637 4321.700 TS 650 4912.000 TS 541 5112.500 CM 50 5502.245 DK 675 3580.100 SV 252 4140.830 SZ 637 4323.700 TS 650 4916.000 TS 541 5113.500 CM 50 5502.255 DK 677 3581.000 SV 252 4140.840 SZ 637 4333.120 TS 595 4918.000 TS 541 5114.500 CM 50 5502.265 DK 677 3581.100 SV 252 4155.010 SZ 635 4333.160 TS 595 4920.000 TS 541 5115.500 CM 50 5502.305 DK 691 3582.000 SV 252 4155.110 SZ 635 4333.180 TS 595 4933.000 PS 614 5116.500 CM 50 5502.325 DK 691 3582.020 SV 252 4155.510 SZ 635 4336.000 PS 665 4934.000 PS 614 5117.500 CM 50 5502.405 DK 670 3583.000 SV 252 4157.000 PS 624 4338.000 PS 665 4935.000 PS 614 5118.500 CM 51 5502.510 DK 528 3584.000 SV 252 4162.000 TS 624 4339.000 PS 665 4937.000 PS 614 5119.500 CM 51 5502.530 DK 529 3584.020 SV 252 4163.000 TS 624 4347.000 PS 613 4943.000 PS 612 5120.500 CM 51 5502.540 DK 530 3585.005 SV 252 4164.000 TS 624 4348.000 SZ 640 4944.000 PS 612 5121.500 CM 51 5502.550 DK 530 3585.020 SV 252 4165.000 TS 624 4361.000 PS 613 4945.000 PS 612 5122.500 CM 51 5502.560 DK 531 3586.005 SV 252 4166.000 TS 624 4362.000 PS 613 4946.000 PS 612 5123.500 CM 51 5502.570 DK 531 3586.020 SV 252 4169.000 PS 610 4363.000 PS 613 4947.000 PS 612 5366.000 PC 118 5503.120 DK 92 3587.000 SV 252 4169.500 TS 611 4364.000 PS 612 5001.000 CM 574 5366.100 PC 118 5504.110 DK 90 3588.005 SV 252 4170.000 PS 610 4365.000 PS 612 5001.050 CM 605 5366.200 PC 118 5504.120 DK 92 3589.005 SV 252 4170.500 TS 611 4367.000 PS 612 5001.051 CM 605 5366.300 PC 118 5505.120 DK 92 3590.005 SV 252 4171.000 PS 610 4373.000 PS 612 5001.052 CM 605 5366.400 PC 118 5506.120 DK 93 3590.015 SV 252 4171.500 TS 611 4374.000 PS 611 5001.053 CM 605 5368.000 PC 118 5507.120 DK 93 3591.060 SV 253 4172.000 PS 610 4375.000 PS 611 5001.054 CM 605 5501.000 DK 536 5507.130 DK 95 3592.010 SV 264 4172.500 TS 611 4376.000 PS 611 5001.060 CM 565 5501.010 DK 536 5507.150 DK 94 3659.180 RP 689 4173.000 PS 610 4377.000 PS 611 5001.061 CM 565 5501.020 DK 536 5508.110 DK 90 3659.190 RP 689 4174.000 PS 610 4378.000 PS 611 5001.062 CM 565 5501.030 DK 536 5508.120 DK 92 4000.100 HD 172 4175.000 PS 610 4379.000 PS 611 5001.075 CM 595 5501.040 DK 536 5509.110 DK 90 4000.200 HD 172 4176.000 PS 610 4380.000 PS 611 5001.080 CM 665 5501.050 DK 536 5509.120 DK 93 4000.210 HD 172 4177.000 PS 610 4381.000 PS 611 5001.081 CM 665 5501.060 DK 536 5509.130 DK 95 4114.000 578 4178.000 PS 610 4382.000 PS 611 5001.082 CM 665 5501.070 DK 536 5510.110 DK 90 TS 4115.000 TS 578 4179.000 PS 624 4393.000 SZ 610 5001.083 CM 665 5501.200 DK 549 5510.120 DK 92 4115.500 TS 578 4180.000 PS 624 4394.000 PS 613 5001.130 CM 532 5501.210 DK 549 5511.110 DK 90 4116.000 TS 578 4181.000 PS 620 4395.000 PS 613 5001.140 CM 532 5501.300 DK 524 5511.120 DK 93 4116.500 TS 578 4182.000 PS 619 4396.000 PS 613 5001.150 CM 532 5501.310 DK 524 5512.120 DK 93 4118.000 TS 578 4183.000 PS 620 4396.500 TS 613 5001.160 CM 532 5501.320 DK 524 5513.110 DK 91 4118.500 TS 578 4191.000 PS 665 4398.000 PS 613 5001.210 CM 525 5501.350 DK 524 5514.110 DK 91 4119.000 PS 624 4192.000 PS 665 4398.500 TS 613 5001.211 CM 525 5501.400 DK 687 5514.130 DK 95 4120.000 576 4193.000 PS 665 4531.000 PS 688 5001.212 CM 525 5501.410 DK 687 5515.110 DK 91 TS 4123.000 TS 578 4196.000 PS 665 4532.000 PS 617 5001.213 CM 525 5501.420 DK 687 5516.110 DK 91 4124.000 TS 578 4198.000 PS 585 4538.000 TS 579 5001.214 CM 525 5501.430 DK 687 5830.500 SE 81 4127.010 SZ 639 4199.000 TS 621 4540.000 TS 546 5001.215 CM 525 5501.440 DK 687 5830.580 SE 83 4127.210 SZ 639 4309.000 TS 609 4568.000 PS 586 5001.216 CM 525 5501.450 DK 687 5831.500 SE 81 4133.000 TS 621 4311.000 PS 651 4568.500 SZ 586 5001.217 CM 525 5501.460 DK 687 5831.580 SE 83 4134.000 TS 621 4315.100 SZ 639 4576.000 TS 593 5001.218 CM 525 5501.480 DK 687 5832.500 SE 81 4138.140 SZ 635 4315.150 SZ 639 4579.000 TS 609 5001.219 CM 525 5501.615 DK 631 5833.500 SE 81 4138.150 SZ 635 4315.200 SZ 639 4582.000 PS 546 5001.220 CM 525 5501.625 DK 631 5834.500 SE 81 4138.180 SZ 635 4315.320 SZ 639 4582.500 TS 546 5001.221 CM 525 5501.655 DK 630 5834.580 SE 83 4138.190 SZ 635 4315.350 SZ 639 4583.000 PS 578 5001.222 CM 526 5501.665 DK 630 5840.500 SE 82 4138.240 SZ 635 4315.400 SZ 639 4583.500 TS 578 5001.223 CM 526 5501.675 DK 630 5841.500 SE 82 4138.250 SZ 635 4315.450 SZ 639 4590.700 TS 591 5001.224 CM 526 5501.685 DK 630 5842.500 SE 82 4138.280 SZ 635 4315.520 SZ 639 4591.700 TS 591 5001.225 CM 526 5501.695 DK 630 5843.500 SE 82 4138.290 SZ 635 4315.550 SZ 639 4592.700 TS 591 5001.226 CM 525 5501.705 DK 630 5844.500 SE 82 4138.300 SZ 635 4315.600 SZ 639 4593.000 TS 593 5001.227 CM 525 5501.715 DK 630 5845.500 SE 82 4138.350 SZ 635 4315.710 SZ 639 4594.000 TS 609 5001.228 CM 525 5501.725 DK 630 5846.500 SE 82 184 4138.400 SZ 635 4315.720 SZ 639 4595.000 PS 588 5001.229 CM 525 5501.730 DK 633 5850.500 SE 4138.450 SZ 635 4315.800 SZ 638 4596.000 TS 609 5001.233 CM 525 5501.805 DK 692 5850.580 SE 185 4139.140 SZ 635 4315.810 SZ 638 4597.000 PS 617 5001.234 CM 525 5501.815 DK 692 5851.500 SE 184 4139.150 SZ 635 4315.820 SZ 638 4598.000 TS 609 5001.235 CM 525 5501.825 DK 692 5852.500 SE 184 4139.180 SZ 635 4315.830 SZ 638 4599.000 TS 609 5001.236 CM 526 5501.835 DK 692 5852.580 SE 185 4139.190 SZ 635 4315.840 SZ 638 4612.000 PS 521 5001.237 CM 525 5501.895 DK 693 5853.500 SE 184 4139.300 SZ 635 4315.850 SZ 638 4638.600 TS 576 5001.239 DK 528 5502.010 DK 437 5853.580 SE 185 4139.350 SZ 635 4315.860 SZ 638 4638.800 TS 576 5001.240 DK 528 5502.020 DK 437 5854.500 SE 184 4140.000 SZ 636 4316.000 PS 651 4650.100 PC 187 5001.310 CM 580 5502.105 DK 673 5855.500 SE 184 4140.010 SZ 636 4317.000 PS 651 4694.000 TS 609 5001.330 CM 580 5502.115 DK 674 6002.000 CP 710 4140.020 SZ 636 4318.000 PS 651 4695.000 TS 609 5001.350 CM 580 5502.120 DK 672 6002.130 SM 707 4140.110 SZ 636 4319.090 PS 667 4696.000 TS 609 5001.360 CM 580 5502.145 DK 673 6003.000 CP 711 4140.120 SZ 636 4319.120 PS 667 4697.000 TS 609 5001.370 CM 608 5502.155 DK 668 6005.500 CP 590 4140.210 SZ 636 4319.160 PS 667 4757.500 AP 116 5001.371 CM 608 5502.205 DK 674 6013.000 CP 703 728 Rittal Catalogue 34 List of model numbers 6013.100 to 7257.050 Model No. Page Model No. 6013.100 CP Page 703 Model No. 6206.740 CP Page 147 Model No. 6380.020 CP 126 6721.500 TP Page 112 Model No. 7030.240 DK Page 460 Model No. 7152.005 DK Page 696 6016.200 CP 589 6206.800 CP 147 6380.040 CP 126 6722.500 TP 113 7030.250 DK 460 7152.035 DK 696 6016.600 CP 161 6206.820 CP 147 6380.400 CP 126 6723.500 TP 114 7030.260 DK 460 7153.005 DK 696 6016.700 CP 161 6206.900 CP 720 6380.410 CP 126 6730.030 TP 532 7030.480 DK 457 7153.035 DK 696 6027.000 CP 704 6212.025 CP 151 6380.510 CP 126 6730.100 TP 532 7030.490 DK 457 7156.005 DK 696 6027.010 CP 704 6212.050 CP 151 6380.610 CP 126 6730.110 TP 532 7030.550 DK 462 7156.035 DK 696 6028.000 CP 704 6212.100 CP 151 6385.010 CP 700 6730.120 TP 532 7050.035 DK 699 7157.035 DK 696 6028.010 CP 704 6212.110 CP 151 6446.030 SM 708 6730.130 TP 532 7050.100 DK 699 7158.035 DK 675 6028.014 CP 704 6212.150 CP 151 6450.010 SM 706 6730.310 TP 597 7061.000 DK 632 7158.100 DK 676 6028.015 CP 704 6212.200 CP 151 6450.020 SM 706 6730.330 TP 597 7063.200 DK 674 7159.035 DK 674 6028.016 CP 704 6212.210 CP 151 6450.050 SM 706 6730.340 TP 597 7063.750 DK 688 7161.000 DK 632 6028.500 CP 704 6212.300 CP 151 6450.060 SM 706 6731.120 TP 117 7063.752 DK 688 7161.700 DK 632 6028.510 CP 704 6212.320 CP 151 6450.070 SM 706 6740.500 TP 115 7063.850 DK 631 7163.500 DK 633 6028.530 CP 704 6212.380 CP 151 6450.170 SM 706 6742.500 TP 115 7064.000 DK 632 7163.550 DK 633 6028.540 CP 704 6212.500 CP 151 6501.000 CP 139 6746.500 TP 115 7065.000 DK 632 7163.560 DK 633 6052.000 CP 666 6212.520 CP 157 6501.020 CP 139 6748.500 TP 115 7066.000 DK 632 7163.565 DK 633 6052.500 CP 662 6212.540 CP 158 6501.050 CP 139 6900.000 IW 121 7066.700 DK 632 7164.035 DK 627 6053.000 CP 705 6212.600 CP 151 6501.070 CP 139 6900.100 IW 121 7072.100 DK 660 7165.035 DK 627 6053.210 CP 705 6212.620 CP 151 6501.110 CP 139 6900.300 IW 119 7072.200 DK 657 7166.035 DK 627 6053.300 CP 705 6212.640 CP 151 6501.120 CP 139 6900.400 IW 121 7072.220 DK 667 7166.735 DK 627 6053.500 CP 705 6212.700 CP 151 6501.130 CP 139 6900.410 IW 121 7072.230 DK 667 7169.535 DK 698 6053.800 CP 705 6212.720 CP 151 6501.140 CP 139 6901.100 IW 121 7072.240 DK 667 7170.535 DK 698 6058.000 CP 705 6212.740 CP 151 6501.150 CP 139 6902.100 IW 121 7077.000 DK 666 7178.535 DK 698 6058.500 CP 705 6212.760 CP 151 6501.160 CP 139 6902.300 IW 121 7078.000 DK 666 7184.035 DK 627 6058.800 CP 705 6212.800 CP 151 6505.100 CP 704 6902.310 IW 165 7081.000 DK 632 7185.035 DK 627 6071.600 CP 159 6212.820 CP 151 6505.200 CP 704 6902.500 IW 121 7094.100 DK 695 7186.035 DK 627 6106.100 CP 164 6212.900 CP 720 6505.500 CP 704 6902.700 IW 628 7094.110 DK 695 7186.735 DK 627 6106.110 CP 167 6218.050 CP 155 6508.010 CP 156 6902.770 IW 660 7094.120 DK 695 7200.001 DK 412 6106.200 CP 164 6218.100 CP 155 6510.210 CP 160 6902.920 IW 519 7094.130 DK 694 7200.210 DK 457 6106.300 CP 165 6218.110 CP 155 6510.330 CP 160 6902.950 IW 714 7094.140 DK 694 7200.215 DK 457 6106.400 CP 164 6218.150 CP 155 6510.340 CP 160 6902.960 IW 627 7097.000 DK 666 7200.216 DK 457 6106.500 CP 166 6218.200 CP 155 6514.200 CP 709 6902.980 IW 627 7097.220 DK 666 7200.217 DK 457 6107.000 CP 702 6218.210 CP 155 6528.410 CP 160 6903.200 IW 713 7097.260 DK 666 7200.800 DK 566 6107.100 CP 702 6218.600 CP 155 6535.010 CP 189 7000.630 TE 423 7097.300 DK 666 7200.801 DK 566 6107.200 CP 702 6218.620 CP 155 6536.010 CP 189 7000.678 DK 607 7097.340 DK 666 7220.500 DK 672 6108.000 CP 625 6218.640 CP 155 6538.010 CP 189 7000.990 DK 695 7098.000 DK 666 7220.600 DK 670 6112.500 CP 166 6218.700 CP 155 6539.010 CP 189 7016.100 DK 677 7098.100 DK 666 7240.110 DK 422 6135.000 CP 165 6218.740 CP 155 6660.010 CP 141 7016.110 DK 677 7099.000 DK 666 7240.120 DK 422 6141.200 IW 165 6218.820 CP 155 6660.050 CP 141 7016.140 DK 669 7109.035 DK 379 7240.200 DK 422 6143.310 CP 167 6315.100 CP 130 6663.000 CP 141 7016.150 DK 669 7109.200 DK 637 7240.201 DK 422 6144.100 CP 167 6315.200 CP 130 6663.400 CP 141 7030.000 DK 450 7111.000 DK 670 7240.210 DK 422 6146.100 CP 164 6315.300 CP 130 6663.500 CP 141 7030.010 DK 450 7111.212 DK 673 7240.220 DK 422 6146.200 CP 164 6315.400 CP 131 6664.000 CP 141 7030.030 DK 456 7111.214 DK 673 7240.230 DK 422 6146.300 CP 164 6315.600 CP 131 6664.100 CP 141 7030.040 DK 454 7111.222 DK 673 7240.240 DK 422 6147.000 CP 167 6320.000 CP 130 6664.300 CP 141 7030.050 DK 454 7111.224 DK 673 7240.260 DK 422 6148.000 CP 522 6320.300 CP 130 6664.500 CP 141 7030.060 DK 457 7111.300 DK 668 7240.280 DK 422 6205.100 CP 617 6320.400 CP 131 6665.000 CP 141 7030.070 DK 458 7111.310 DK 668 7240.300 DK 423 6206.025 CP 147 6320.500 CP 131 6665.500 CP 141 7030.071 DK 458 7111.350 DK 668 7240.310 DK 422 6206.050 CP 147 6320.600 CP 131 6681.000 CP 188 7030.080 DK 457 7111.900 DK 670 7240.330 DK 422 6206.100 CP 147 6321.000 CP 132 6700.500 111 7030.090 DK 457 7112.000 DK 670 7240.510 DK 422 TP 6206.200 CP 147 6340.000 CP 133 6701.500 TP 112 7030.091 DK 457 7113.000 DK 646 7241.005 DK 697 6206.300 CP 147 6340.100 CP 133 6702.500 TP 113 7030.092 DK 457 7115.000 DK 633 7241.024 DK 697 6206.320 CP 147 6340.300 CP 133 6703.500 TP 114 7030.093 DK 457 7116.500 DK 671 7241.045 DK 697 6206.340 CP 147 6340.400 CP 133 6704.500 TP 111 7030.094 DK 457 7119.140 DK 630 7241.500 DK 697 6206.360 CP 147 6341.000 CP 590 6705.500 TP 112 7030.095 DK 457 7119.250 DK 631 7242.015 DK 697 6206.380 CP 147 6372.541 CP 124 6706.500 TP 113 7030.100 DK 451 7119.400 DK 631 7246.010 DK 690 6206.400 CP 147 6372.542 CP 124 6707.500 TP 114 7030.110 DK 454 7144.035 DK 629 7246.030 DK 690 6206.420 CP 147 6372.543 CP 124 6710.500 TP 111 7030.111 DK 454 7145.035 DK 629 7246.060 DK 690 6206.440 CP 147 6372.551 CP 124 6711.500 TP 112 7030.120 DK 454 7145.635 DK 629 7246.100 DK 690 6206.460 CP 162 6372.552 CP 124 6712.500 TP 113 7030.130 DK 454 7145.735 DK 629 7246.400 DK 690 6206.480 CP 156 6372.553 CP 124 6713.500 TP 114 7030.140 DK 454 7149.135 DK 675 7246.420 DK 689 6206.500 CP 157 6372.561 CP 124 6714.500 TP 111 7030.150 DK 454 7151.005 DK 696 7246.500 DK 694 6206.600 CP 147 6372.562 CP 124 6715.500 TP 112 7030.190 DK 454 7151.035 DK 696 7256.035 DK 677 6206.620 CP 147 6372.563 CP 124 6716.500 TP 113 7030.200 DK 452 7151.105 DK 696 7257.005 DK 674 6206.640 CP 158 6375.010 CP 700 6717.500 TP 114 7030.220 DK 455 7151.110 DK 696 7257.035 DK 674 6206.700 CP 147 6380.000 CP 126 6720.500 TP 111 7030.230 DK 455 7151.300 DK 693 7257.050 DK 675 Rittal Catalogue 34 729 List of model numbers 7257.100 to 8200.500 Model No. Page Model No. Page Model No. Page Model No. Page Model No. Page Model No. Page 7257.100 DK 674 7507.210 DK 99 7825.375 DK 657 7856.090 DK 411 7955.310 DK 417 7998.606 DK 401 7257.105 DK 674 7507.220 DK 99 7825.380 DK 532 7856.100 DK 411 7955.311 DK 417 7998.607 DK 401 7257.200 DK 674 7507.706 DK 686 7825.381 DK 532 7856.120 DK 411 7955.331 DK 417 7999.009 DK 466 7269.135 DK 676 7507.709 DK 686 7825.387 DK 532 7856.170 DK 413 7955.332 DK 417 7999.709 DK 467 7269.235 DK 676 7507.712 DK 686 7825.388 DK 533 7856.190 DK 411 7955.333 DK 417 7999.898 DK 468 7280.035 DK 424 7507.715 DK 686 7825.900 DK 522 7856.201 DK 411 7955.334 DK 417 7999.922 DK 435 7280.100 DK 424 7507.718 DK 686 7826.605 DK 585 7856.203 DK 412 7955.335 DK 417 7999.961 LS 470 7281.035 DK 712 7507.721 DK 686 7826.665 DK 585 7856.204 DK 412 7955.336 DK 417 7999.962 LS 470 7281.200 DK 711 7507.740 DK 521 7826.669 DK 585 7856.220 DK 411 7955.401 DK 417 7999.963 LS 470 7282.035 DK 691 7507.760 DK 440 7826.685 DK 585 7856.230 DK 411 7955.410 DK 417 7999.964 LS 470 7283.035 DK 691 7526.964 DK 617 7826.689 DK 585 7856.240 DK 411 7955.411 DK 417 7999.965 LS 470 7284.135 DK 686 7541.000 DK 647 7826.750 DK 440 7856.321 DK 409 7955.431 DK 417 7999.966 LS 470 7296.000 DK 682 7542.000 DK 647 7826.805 DK 585 7856.323 DK 409 7955.432 DK 417 7999.991 LS 471 7297.000 DK 682 7543.000 DK 647 7826.809 DK 585 7857.130 DK 408 7955.433 DK 417 7999.992 LS 471 7298.000 DK 682 7544.000 DK 647 7826.825 DK 585 7857.150 DK 408 7955.434 DK 417 7999.999 DK 468 7299.000 DK 682 7545.000 DK 647 7826.865 DK 585 7857.190 DK 408 7955.435 DK 417 8000.100 TS 511 7320.530 DK 455 7546.000 DK 647 7826.869 DK 585 7857.300 DK 408 7955.436 DK 417 8000.500 TS 522 7320.560 DK 455 7547.000 DK 647 7826.885 DK 585 7857.310 DK 408 7955.510 DK 418 8004.500 TS 68 7320.570 DK 455 7548.000 DK 647 7826.889 DK 585 7857.320 DK 408 7955.511 DK 418 8005.500 TS 69 7320.630 DK 455 7548.210 DK 645 7827.181 DK 685 7857.421 DK 463 7955.512 DK 418 8006.500 TS 70 7320.631 DK 455 7549.000 DK 647 7827.201 DK 685 7857.998 DK 472 7955.513 DK 418 8080.500 TS 65 7320.721 DK 455 7552.002 DK 461 7827.221 DK 685 7858.100 DK 680 7955.520 DK 418 8084.500 TS 65 7320.790 DK 460 7552.120 DK 461 7827.300 DK 632 7858.160 FR 669 7955.521 DK 418 8100.000 TS 511 7320.793 RM 460 7552.122 DK 461 7827.480 DK 685 7858.162 FR 669 7955.522 DK 418 8100.010 TS 511 7320.794 DK 460 7552.140 DK 461 7827.544 DK 693 7859.050 DK 410 7955.530 DK 418 8100.120 TS 511 7320.814 DK 458 7552.142 DK 461 7828.040 DK 613 7859.053 DK 410 7955.531 DK 418 8100.160 TS 511 7338.120 DK 473 7583.500 TS 517 7828.050 DK 613 7859.120 DK 411 7955.532 DK 418 8100.180 TS 511 7338.130 DK 473 7610.000 DK 458 7828.060 DK 613 7859.130 DK 411 7955.540 DK 418 8100.235 TS 534 7338.220 DK 473 7641.000 DK 104 7828.061 DK 669 7859.212 DK 411 7955.541 DK 418 8100.300 TS 511 7338.320 DK 473 7643.000 DK 104 7828.062 DK 669 7859.222 DK 411 7955.542 DK 418 8100.400 TS 511 7391.000 DK 96 7645.000 DK 104 7828.080 DK 613 7859.225 DK 412 7955.901 DK 417 8100.500 TS 511 7396.000 DK 96 7705.035 DK 657 7828.081 DK 669 7859.232 DK 411 7955.910 DK 417 8100.600 TS 511 7400.000 DK 96 7705.110 DK 567 7828.082 DK 669 7859.235 DK 412 7955.911 DK 417 8100.602 TS 511 7401.000 DK 682 7705.120 DK 567 7828.100 DK 613 7859.312 DK 421 7955.931 DK 417 8100.800 TS 511 7402.000 DK 682 7705.235 DK 656 7828.101 DK 669 7859.315 DK 421 7955.932 DK 417 8100.802 TS 511 7445.000 DK 96 7706.135 DK 101 7828.102 DK 669 7859.316 DK 421 7955.933 DK 417 8104.235 TS 534 7451.000 DK 105 7709.135 DK 101 7828.120 DK 613 7859.332 DK 421 7955.940 DK 418 8105.235 TS 534 7462.000 DK 698 7709.535 DK 100 7828.121 DK 669 7859.335 DK 421 7955.941 DK 418 8106.235 TS 534 7463.100 DK 698 7709.735 DK 100 7828.122 DK 669 7890.020 DK 462 7955.942 DK 418 8106.750 TS 640 7463.200 DK 698 7712.135 DK 101 7829.100 DK 647 7890.242 DK 462 7966.035 DK 438 8108.235 TS 534 7464.035 DK 627 7715.135 DK 101 7829.110 DK 647 7890.247 DK 462 7967.000 DK 586 8108.750 TS 640 7465.035 DK 627 7715.535 DK 100 7829.150 DK 645 7890.500 DK 462 7968.035 DK 438 8115.235 TS 534 7466.035 DK 627 7715.735 DK 100 7829.152 DK 645 7950.100 DK 686 7980.000 DK 438 8126.235 TS 534 7466.735 DK 627 7721.135 DK 101 7829.200 DK 645 7950.150 DK 579 7980.100 DK 438 8128.235 TS 534 7469.535 DK 698 7721.535 DK 100 7829.400 DK 626 7950.200 DK 579 7980.148 DK 438 8145.235 TS 534 7470.535 DK 698 7721.735 DK 100 7831.472 DK 671 7955.010 DK 418 7986.035 DK 438 8146.235 TS 534 7474.535 DK 698 7752.950 DK 647 7831.723 DK 537 7955.015 DK 418 7988.035 DK 438 8148.235 TS 534 7478.535 DK 698 7824.120 DK 536 7831.724 DK 537 7955.020 DK 418 7990.101 DK 463 8165.235 TS 534 7480.035 DK 425 7824.128 DK 536 7856.005 DK 409 7955.110 DK 416 7990.103 DK 463 8166.235 TS 534 7480.300 DK 425 7824.188 DK 536 7856.006 DK 409 7955.111 DK 416 7990.201 DK 463 8168.235 TS 534 7484.035 DK 627 7824.200 DK 536 7856.008 DK 409 7955.131 DK 416 7990.203 DK 463 8170.235 TS 534 7485.035 DK 627 7824.201 DK 550 7856.010 DK 409 7955.132 DK 416 7990.206 DK 463 8173.235 TS 534 7486.035 DK 627 7824.202 DK 550 7856.011 DK 413 7955.133 DK 416 7990.208 DK 463 8174.235 TS 534 7486.735 DK 627 7824.206 DK 536 7856.013 DK 413 7955.134 DK 416 7990.301 DK 463 8175.235 TS 534 7493.100 DK 521 7824.208 DK 536 7856.014 DK 413 7955.135 DK 416 7990.303 DK 463 8176.235 TS 534 7494.000 DK 682 7824.220 DK 536 7856.020 DK 409 7955.201 DK 417 7990.306 DK 463 8180.235 TS 534 7495.000 DK 522 7824.222 DK 550 7856.022 DK 413 7955.210 DK 417 7990.308 DK 463 8184.235 TS 534 7501.000 DK 97 7824.228 DK 536 7856.023 DK 413 7955.211 DK 417 7995.992 DK 468 8185.235 TS 534 7507.000 DK 98 7824.510 DK 536 7856.025 DK 413 7955.231 DK 417 7998.106 DK 400 8186.235 TS 534 7507.010 DK 98 7824.520 DK 574 7856.026 DK 413 7955.232 DK 417 7998.107 DK 400 8188.235 TS 534 7507.020 DK 99 7824.525 DK 574 7856.027 DK 413 7955.233 DK 417 7998.206 DK 402 8200.000 TS 511 7507.030 DK 99 7824.540 DK 548 7856.029 DK 413 7955.234 DK 417 7998.306 DK 401 8200.010 TS 511 7507.100 DK 98 7825.250 DK 520 7856.030 DK 413 7955.235 DK 417 7998.307 DK 401 8200.120 TS 511 7507.110 DK 98 7825.360 DK 532 7856.070 DK 411 7955.236 DK 417 7998.406 DK 400 8200.300 TS 511 7507.120 DK 99 7825.361 DK 532 7856.080 DK 411 7955.238 DK 417 7998.407 DK 400 8200.400 TS 511 7507.200 DK 99 7825.367 DK 532 7856.082 DK 411 7955.301 DK 417 7998.506 DK 402 8200.500 TS 511 730 Rittal Catalogue 34 List of model numbers 8200.600 to 9117.700 Model No. Page Model No. Page Model No. Page Model No. Page Model No. Page Model No. 8200.600 TS 511 8601.915 TS 513 8611.170 TS 570 8614.180 TS 591 8800.310 TS 610 8801.715 TS 554 8200.800 TS 511 8601.920 TS 513 8611.180 TS 565 8614.200 TS 591 8800.320 TS 610 8801.735 TS 582 8204.500 TS 68 8601.980 TS 513 8611.190 TS 565 8614.240 TS 596 8800.330 TS 620 8801.745 TS 582 8205.500 TS 69 8602.000 TS 513 8611.200 TS 565 8614.250 TS 596 8800.340 TS 624 8801.755 TS 582 8206.500 TS 70 8602.015 TS 514 8611.210 TS 566 8614.260 TS 596 8800.350 TS 624 8801.765 TS 582 8208.500 TS 71 8602.025 TS 514 8611.220 TS 570 8614.640 TS 596 8800.360 TS 618 8801.775 TS 582 8215.500 TS 63 8602.030 TS 514 8611.280 TS 564 8614.650 TS 596 8800.370 TS 619 8801.915 TS 554 8226.500 TS 72 8602.040 TS 514 8611.290 TS 564 8614.660 TS 596 8800.380 TS 610 8802.060 TS 651 8245.500 TS 63 8602.050 TS 514 8611.300 PC 549 8614.675 TS 596 8800.390 TS 515 8802.065 TS 652 8265.500 TS 64 8602.060 TS 514 8611.330 564 8614.680 TS 596 8800.400 TS 543 8802.080 TS 651 8284.500 TS 65 8602.065 TS 514 8611.340 TS 564 8614.840 TS 596 8800.410 TS 543 8802.085 TS 652 8285.500 TS 66 8602.080 TS 514 8611.350 TS 564 8614.850 TS 596 8800.420 TS 544 8802.100 TS 651 8286.500 TS 67 8602.085 TS 514 8611.360 TS 564 8614.880 TS 596 8800.430 TS 545 8802.105 TS 652 8405.510 TS 69 8602.100 TS 513 8611.370 TS 566 8615.500 TS 63 8800.470 TS 546 8802.120 TS 651 8406.510 TS 70 8602.200 TS 513 8612.000 TS 606 8626.500 TS 72 8800.490 TS 544 8802.125 TS 652 8410.510 TS 73 8602.400 TS 513 8612.010 TS 606 8645.500 TS 63 8800.500 TS 543 8802.160 TS 651 8418.510 TS 73 8602.500 TS 513 8612.020 TS 606 8665.500 TS 64 8800.510 TS 663 8802.165 TS 652 8430.510 TS 73 8602.600 TS 513 8612.030 TS 606 8684.500 TS 65 8800.520 TS 663 8802.220 TS 594 TS Page 8438.510 TS 73 8602.605 TS 513 8612.040 TS 606 8685.500 TS 66 8800.531 TS 664 8802.260 TS 594 8450.600 TS 182 8602.800 TS 513 8612.050 TS 606 8686.500 TS 67 8800.540 TS 663 8802.280 TS 594 8450.680 TS 183 8602.805 TS 513 8612.060 TS 606 8700.000 TS 544 8800.560 TS 691 8804.500 TS 68 8451.600 TS 182 8602.850 TS 513 8612.070 SZ 606 8700.010 TS 535 8800.570 TS 663 8805.500 TS 69 8452.600 TS 182 8602.905 TS 513 8612.080 TS 606 8700.060 TS 534 8800.580 TS 691 8806.500 TS 70 8453.600 TS 182 8602.915 TS 513 8612.090 SZ 606 8700.140 TS 548 8800.590 TS 543 8806.580 TS 74 8454.600 TS 182 8602.920 TS 513 8612.100 TS 606 8700.150 TS 548 8800.600 TS 641 8806.750 TS 80 8455.600 TS 182 8602.980 TS 513 8612.120 TS 606 8700.160 TS 548 8800.610 TS 592 8808.500 TS 71 8456.600 TS 182 8604.500 TS 68 8612.130 TS 606 8700.840 TS 534 8800.620 TS 641 8808.750 TS 80 8457.600 TS 182 8605.500 TS 69 8612.140 TS 606 8700.850 TS 534 8800.630 TS 592 8815.500 TS 63 8485.510 TS 66 8606.500 TS 70 8612.150 TS 606 8701.000 TS 518 8800.640 TS 612 8826.500 TS 72 8486.510 TS 67 8608.500 TS 71 8612.160 TS 606 8701.040 TS 518 8800.650 TS 612 8845.500 TS 63 8600.255 TS 515 8609.020 TS 540 8612.180 TS 606 8701.050 TS 518 8800.660 TS 641 8865.500 TS 64 8600.265 TS 515 8609.030 TS 540 8612.240 TS 609 8701.060 TS 518 8800.670 TS 547 8880.500 TS 66 8600.455 TS 515 8609.040 TS 537 8612.250 TS 609 8701.180 TS 574 8800.680 TS 641 8881.500 TS 67 8600.465 TS 515 8609.050 TS 537 8612.260 TS 609 8701.200 TS 518 8800.690 TS 640 8884.500 TS 65 8600.510 TS 515 8609.060 TS 537 8612.280 TS 609 8701.600 TS 518 8800.710 TS 574 8885.500 TS 66 8600.520 TS 515 8609.080 TS 537 8612.400 TS 616 8701.800 TS 518 8800.750 TS 664 8886.500 TS 67 8600.655 TS 515 8609.100 TS 538 8612.410 TS 616 8702.000 TS 518 8800.751 TS 664 8950.050 TS 541 8600.665 TS 515 8609.110 TS 538 8612.500 TS 607 8702.040 TS 518 8800.752 TS 664 8950.060 TS 541 8600.855 TS 515 8609.120 TS 538 8612.520 TS 607 8702.050 TS 518 8800.753 TS 664 8950.840 TS 541 8600.865 TS 515 8609.130 TS 538 8612.550 TS 607 8702.060 TS 518 8800.754 TS 664 8950.850 TS 541 8601.000 TS 513 8609.140 TS 539 8612.560 TS 607 8702.200 TS 518 8800.806 TS 618 9055.310 DK 461 8601.015 TS 514 8609.150 TS 539 8612.580 TS 607 8702.600 TS 518 8800.808 TS 618 9055.312 DK 461 8601.025 TS 514 8609.160 TS 539 8612.650 TS 608 8702.800 TS 518 8800.825 SZ 548 9055.410 DK 461 8601.030 TS 514 8609.170 TS 539 8612.660 TS 608 8800.020 TS 574 8800.830 TS 524 9055.412 DK 461 8601.040 TS 514 8609.260 TS 537 8612.680 TS 608 8800.040 TS 550 8800.845 SZ 548 9101.210 GA 28 8601.050 TS 514 8609.390 TS 539 8612.750 TS 608 8800.050 TS 592 8800.855 SZ 548 9102.210 GA 28 8601.060 TS 514 8609.840 TS 537 8612.760 TS 608 8800.060 TS 650 8800.865 SZ 548 9104.210 GA 28 8601.065 TS 514 8609.850 TS 537 8612.780 TS 608 8800.070 TS 566 8800.870 SZ 547 9105.210 GA 28 8601.080 TS 514 8609.860 TS 537 8612.960 TS 614 8800.071 TS 535 8800.885 SZ 548 9105.700 GA 29 8601.085 TS 514 8610.605 TS 549 8612.980 TS 614 8800.075 TS 524 8800.900 PC 628 9106.210 GA 28 8601.100 TS 514 8610.625 TS 549 8613.000 TS 683 8800.080 TS 650 8800.910 PC 628 9107.210 GA 28 8601.130 TS 517 8610.685 TS 549 8613.010 TS 684 8800.090 TS 592 8800.920 PC 517 9108.210 GA 28 8601.140 TS 517 8610.805 TS 549 8613.030 TS 684 8800.100 TS 650 8800.950 TS 574 9108.700 GA 29 8601.200 TS 513 8610.825 TS 549 8613.040 TS 684 8800.110 TS 535 8801.000 TS 551 9110.210 GA 28 8601.300 TS 513 8610.885 TS 549 8613.060 TS 683 8800.120 TS 650 8801.010 TS 551 9110.700 GA 29 8601.400 TS 513 8611.020 TS 564 8613.080 TS 683 8800.130 TS 609 8801.230 TS 554 9111.210 GA 28 8601.450 TS 520 8611.045 TS 564 8613.150 TS 688 8800.150 TS 626 8801.240 TS 554 9112.210 GA 28 8601.500 TS 513 8611.070 TS 564 8613.160 TS 688 8800.160 TS 626 8801.250 TS 554 9112.700 GA 29 8601.600 TS 513 8611.080 TS 549 8613.180 TS 688 8800.170 TS 547 8801.260 TS 554 9113.210 GA 28 8601.605 TS 513 8611.100 TS 570 8613.300 TS 684 8800.180 TS 626 8801.310 TS 383 9113.700 GA 29 8601.680 TS 520 8611.110 TS 570 8613.360 TS 684 8800.190 TS 574 8801.320 TS 383 9114.210 GA 28 8601.800 TS 513 8611.120 TS 570 8613.860 TS 643 8800.200 TS 523 8801.330 TS 383 9114.700 GA 29 8601.805 TS 513 8611.130 TS 570 8614.040 TS 596 8800.220 TS 522 8801.340 TS 383 9116.210 GA 28 8601.850 TS 513 8611.140 TS 570 8614.050 TS 596 8800.280 TS 593 8801.350 TS 383 9116.700 GA 29 8601.860 TS 643 8611.150 TS 570 8614.060 TS 596 8800.290 TS 523 8801.380 TS 383 9117.210 GA 28 8601.905 TS 513 8611.160 TS 570 8614.100 TS 597 8800.300 TS 610 8801.450 TS 550 9117.700 GA 29 Rittal Catalogue 34 731 List of model numbers 9118.210 to 9650.221 Model No. Page Model No. Page Model No. 9118.210 GA Page 28 Model No. 9340.430 SV 221 9342.311 SV 258 9344.520 SV Page 263 Model No. 9502.000 PK Page 24 Model No. 9629.010 SV Page 9118.700 GA 29 9340.450 SV 221 9342.314 SV 218 9344.530 SV 263 9504.000 PK 24 9629.100 SV 207 9119.210 GA 28 9340.460 SV 220 9342.320 SV 217 9344.540 SV 263 9505.000 PK 24 9630.000 SV 207 208 9121.122 GA 29 9340.470 SV 220 9342.321 SV 258 9344.550 SV 263 9506.000 PK 24 9640.050 SV 268 9121.160 GA 29 9340.510 SV 222 9342.324 SV 218 9344.610 SV 263 9507.000 PK 24 9640.080 SV 268 9121.230 GA 29 9340.520 SV 222 9342.400 SV 226 9344.620 SV 263 9508.000 PK 24 9640.150 SV 268 9123.000 GA 29 9340.530 SV 222 9342.410 SV 226 9344.680 SV 263 9508.050 PK 26 9640.171 SV 269 9201.600 KEL 194 9340.550 SV 222 9342.500 SV 227 9345.000 SV 249 9509.000 PK 24 9640.181 SV 269 9202.600 KEL 194 9340.560 SV 222 9342.504 SV 229 9345.010 SV 249 9510.000 PK 24 9640.191 SV 268 9203.600 KEL 194 9340.610 SV 223 9342.510 SV 227 9345.030 SV 249 9511.000 PK 24 9640.201 SV 268 9204.600 KEL 194 9340.620 SV 223 9342.514 SV 229 9345.100 SV 250 9512.000 PK 24 9640.206 SV 268 9205.600 KEL 194 9340.630 SV 223 9342.540 SV 226 9345.200 SV 250 9513.000 PK 24 9640.211 SV 268 9206.600 KEL 194 9340.650 SV 223 9342.550 SV 226 9345.400 SV 250 9514.000 PK 25 9640.216 SV 268 9207.600 KEL 194 9340.660 SV 222 9342.560 SV 261 9345.600 SV 227 9514.050 PK 26 9640.221 SV 268 9208.600 KEL 194 9340.700 SV 221 9342.570 SV 261 9345.604 SV 229 9514.100 PK 25 9640.226 SV 268 9209.600 KEL 194 9340.710 SV 220 9342.640 SV 261 9345.610 SV 227 9515.000 PK 25 9640.231 SV 268 9214.000 KEL 646 9340.720 SV 220 9342.720 SV 261 9345.614 SV 229 9515.100 PK 25 9640.236 SV 268 9266.000 KEL 588 9340.730 SV 220 9342.800 SV 260 9345.700 SV 228 9516.000 PK 25 9640.241 SV 268 9301.000 KEL 192 9340.740 SV 220 9342.810 SV 260 9345.704 SV 230 9516.100 PK 25 9640.246 SV 268 9302.000 KEL 192 9340.750 SV 220 9342.820 SV 260 9345.710 SV 228 9517.000 PK 25 9640.251 SV 268 9303.000 KEL 192 9340.760 SV 219 9342.850 SV 259 9345.714 SV 230 9517.100 PK 25 9640.256 SV 268 9304.000 KEL 192 9340.770 SV 220 9342.860 SV 259 9345.720 SV 228 9518.000 PK 25 9640.261 SV 268 9305.000 KEL 192 9340.820 SV 260 9342.870 SV 259 9345.724 SV 230 9518.100 PK 25 9640.266 SV 268 9306.000 KEL 192 9340.830 SV 260 9342.880 SV 259 9345.730 SV 228 9519.000 PK 25 9640.271 SV 268 9320.020 254 9340.850 SV 260 9342.920 SV 259 9345.734 SV 230 9519.100 PK 25 9640.276 SV 268 SV 9320.030 SV 254 9340.860 SV 260 9342.930 SV 259 9346.000 SV 246 9520.000 PK 25 9640.281 SV 268 9320.060 SV 254 9340.870 SV 260 9342.940 SV 259 9346.010 SV 246 9520.100 PK 25 9640.286 SV 268 9320.070 SV 254 9340.880 SV 260 9342.950 SV 259 9346.015 SV 248 9521.000 PK 25 9640.291 SV 268 9320.120 SV 261 9340.890 SV 260 9342.980 SV 259 9346.020 SV 246 9521.050 PK 26 9640.296 SV 268 9320.150 SV 258 9340.900 SV 224 9343.000 SV 240 9346.030 SV 246 9521.100 PK 25 9640.301 SV 268 9340.000 SV 212 9340.910 SV 224 9343.010 SV 240 9346.040 SV 247 9522.000 PK 25 9640.306 SV 268 9340.004 SV 212 9340.930 SV 224 9343.020 SV 242 9346.050 SV 247 9522.100 PK 25 9640.311 SV 268 9340.010 SV 212 9340.950 SV 237 9343.030 SV 242 9346.060 SV 246 9523.000 PK 25 9640.316 SV 268 9340.030 SV 251 9341.000 SV 214 9343.040 SV 244 9346.110 SV 247 9523.100 PK 25 9640.325 SV 269 9340.040 SV 251 9341.050 SV 214 9343.050 SV 244 9346.115 SV 248 9524.000 PK 25 9640.330 SV 269 9340.050 SV 212 9341.070 SV 215 9343.100 SV 241 9346.210 SV 247 9524.100 PK 25 9640.340 SV 269 9340.070 SV 213 9341.100 SV 256 9343.110 SV 241 9346.215 SV 248 9548.000 PK 27 9640.350 SV 269 9340.074 SV 213 9341.110 SV 256 9343.120 SV 243 9346.310 SV 247 9549.000 PK 27 9640.360 SV 268 9340.090 SV 251 9341.120 SV 256 9343.130 SV 243 9346.315 SV 248 9550.000 PK 27 9640.365 SV 268 9340.100 SV 256 9341.130 SV 256 9343.140 SV 245 9346.400 SV 263 9581.000 PK 27 9640.370 SV 269 9340.110 SV 256 9341.140 SV 256 9343.150 SV 245 9346.440 SV 264 9583.000 PK 27 9640.380 SV 269 9340.120 SV 256 9341.170 SV 256 9343.200 SV 241 9346.450 SV 264 9600.000 SV 206 9640.600 SV 270 9340.130 SV 256 9342.000 SV 214 9343.210 SV 241 9346.460 SV 264 9601.000 SV 206 9640.610 SV 270 9340.134 SV 256 9342.004 SV 214 9343.230 SV 243 9346.470 SV 264 9602.000 SV 206 9640.900 SV 269 9340.140 SV 256 9342.030 SV 251 9343.250 SV 245 9346.480 SV 265 9603.000 SV 206 9640.910 SV 269 9340.170 SV 256 9342.050 SV 214 9343.300 SV 241 9346.560 SV 265 9605.000 SV 206 9640.920 SV 269 9340.200 SV 256 9342.070 SV 215 9343.310 SV 241 9346.570 SV 265 9606.000 SV 206 9640.930 SV 269 9340.210 SV 256 9342.074 SV 215 9343.330 SV 243 9346.600 SV 265 9607.000 SV 206 9640.940 SV 269 9340.214 SV 256 9342.100 SV 256 9343.350 SV 245 9346.610 SV 265 9608.000 SV 206 9640.970 SV 269 9340.220 SV 256 9342.110 SV 256 9344.000 SV 240 9346.620 SV 265 9609.000 SV 206 9640.980 SV 269 9340.224 SV 256 9342.120 SV 256 9344.010 SV 240 9346.630 SV 265 9610.000 SV 206 9649.000 SV 268 9340.230 SV 256 9342.130 SV 256 9344.020 SV 242 9346.640 SV 265 9611.000 SV 206 9649.010 SV 268 9340.260 SV 225 9342.134 SV 256 9344.030 SV 242 9346.650 SV 265 9612.000 SV 206 9649.060 SV 268 9340.270 SV 225 9342.140 SV 256 9344.040 SV 244 9350.010 SV 253 9613.000 SV 206 9649.160 SV 268 9340.280 SV 260 9342.170 SV 256 9344.050 SV 244 9350.060 SV 253 9614.000 SV 208 9649.360 SV 268 9340.290 SV 259 9342.200 SV 216 9344.100 SV 241 9350.075 SV 254 9614.100 SV 208 9650.050 SV 268 9340.300 SV 225 9342.210 SV 216 9344.110 SV 241 9401.600 KEL 193 9614.110 SV 208 9650.080 SV 268 9340.310 SV 219 9342.220 SV 216 9344.130 SV 243 9402.600 KEL 193 9615.000 SV 208 9650.098 SV 268 9340.320 SV 219 9342.224 SV 216 9344.150 SV 245 9403.600 KEL 193 9615.100 SV 208 9650.100 SV 268 9340.340 SV 219 9342.240 SV 216 9344.210 SV 241 9404.600 KEL 193 9616.000 SV 209 9650.150 SV 268 9340.350 SV 220 9342.250 SV 217 9344.230 SV 243 9405.600 KEL 193 9617.000 SV 209 9650.171 SV 269 9340.370 SV 219 9342.254 SV 217 9344.250 SV 245 9406.600 KEL 193 9623.000 SV 258 9650.181 SV 269 9340.380 SV 220 9342.270 SV 217 9344.310 SV 241 9407.600 KEL 193 9624.000 SV 206 9650.191 SV 268 9340.390 SV 220 9342.280 SV 217 9344.330 SV 243 9408.600 KEL 193 9625.000 SV 208 9650.201 SV 268 9340.400 SV 219 9342.300 SV 217 9344.350 SV 245 9409.600 KEL 193 9627.000 SV 209 9650.211 SV 268 9340.410 SV 221 9342.310 SV 217 9344.510 SV 263 9500.000 PK 24 9629.000 SV 209 9650.221 SV 268 732 Rittal Catalogue 34 List of model numbers 9650.231 to 9674.348 Model No. Page Model No. Page Model No. Page Model No. Page Model No. 9650.231 SV 268 9661.160 SV 648 9666.293 SV 299 9670.226 SV Page 79 Model No. 9672.196 SV 552 9673.506 SV Page 9650.241 SV 268 9661.180 SV 648 9666.300 SV 299 9670.406 SV 76 9672.198 SV 552 9673.508 SV 285 9650.251 SV 268 9661.200 SV 649 9666.303 SV 299 9670.408 SV 76 9672.314 SV 553 9673.642 SV 287 285 9650.261 SV 268 9661.230 SV 649 9666.310 SV 300 9670.426 SV 77 9672.316 SV 553 9673.643 SV 287 9650.271 SV 268 9661.235 SV 649 9666.340 SV 300 9670.428 SV 77 9672.318 SV 553 9673.644 SV 287 9650.281 SV 268 9661.240 SV 649 9666.350 SV 300 9670.606 SV 76 9672.324 SV 553 9673.646 SV 287 9650.291 SV 268 9661.300 SV 648 9666.380 SV 300 9670.608 SV 76 9672.326 SV 553 9673.648 SV 287 9650.301 SV 268 9661.305 SV 648 9666.390 SV 300 9670.626 SV 77 9672.328 SV 553 9673.660 SV 287 9650.311 SV 268 9661.320 SV 648 9666.400 SV 300 9670.628 SV 77 9672.334 SV 553 9673.661 SV 287 9650.325 SV 269 9661.325 SV 648 9666.410 SV 300 9670.806 SV 76 9672.336 SV 553 9673.662 SV 287 9650.330 SV 269 9661.340 SV 648 9666.420 SV 300 9670.808 SV 76 9672.338 SV 553 9673.663 SV 287 9650.340 SV 269 9661.345 SV 648 9666.430 SV 301 9670.826 SV 77 9672.344 SV 553 9673.664 SV 287 9650.360 SV 268 9661.350 SV 649 9666.440 SV 301 9670.828 SV 77 9672.346 SV 553 9673.666 SV 287 9650.370 SV 269 9661.355 SV 649 9666.520 SV 303 9671.204 SV 553 9672.348 SV 553 9673.668 SV 287 9650.380 SV 269 9661.360 SV 648 9666.530 SV 303 9671.206 SV 553 9672.354 SV 553 9673.671 SV 287 9650.600 SV 270 9661.365 SV 648 9666.533 SV 303 9671.208 SV 553 9672.356 SV 553 9673.672 SV 287 9650.610 SV 270 9661.380 SV 648 9666.550 SV 301 9671.364 SV 583 9672.358 SV 553 9673.673 SV 287 9650.900 SV 269 9661.385 SV 648 9666.560 SV 301 9671.366 SV 583 9672.384 SV 555 9673.674 SV 287 9650.905 SV 269 9665.750 SV 584 9666.570 SV 301 9671.368 SV 583 9672.386 SV 555 9673.680 SV 287 9650.910 SV 269 9665.760 SV 584 9666.580 SV 301 9671.384 SV 583 9672.388 SV 555 9673.681 SV 287 9650.920 SV 269 9665.770 SV 584 9666.583 SV 301 9671.386 SV 583 9673.004 SV 286 9673.682 SV 287 9650.980 SV 269 9665.780 SV 584 9666.590 SV 302 9671.388 SV 583 9673.006 SV 286 9673.683 SV 287 9650.990 SV 269 9665.785 SV 584 9666.600 SV 302 9671.546 SV 583 9673.008 SV 286 9673.684 SV 287 9659.000 SV 268 9665.903 SV 583 9666.603 SV 302 9671.548 SV 583 9673.051 SV 283 9673.686 SV 287 9659.010 SV 268 9665.913 SV 583 9666.640 SV 302 9671.568 SV 583 9673.052 SV 283 9673.688 SV 287 9659.060 SV 268 9665.923 SV 583 9666.650 SV 304 9671.586 SV 583 9673.055 SV 283 9673.692 SV 287 9659.160 SV 268 9665.943 SV 583 9666.660 SV 304 9671.588 SV 583 9673.061 SV 283 9673.693 SV 287 9659.360 SV 268 9665.953 SV 583 9666.665 SV 304 9671.646 SV 583 9673.062 SV 283 9673.694 SV 287 9659.525 SV 583 9665.963 SV 583 9666.670 SV 304 9671.648 SV 583 9673.063 SV 283 9673.901 SV 622 9659.535 SV 583 9666.000 SV 299 9666.680 SV 304 9671.666 SV 583 9673.064 SV 283 9673.902 SV 622 9659.545 SV 583 9666.010 SV 299 9666.702 SV 305 9671.668 SV 583 9673.065 SV 283 9673.903 SV 622 9659.555 SV 583 9666.020 SV 299 9666.703 SV 305 9671.686 SV 583 9673.066 SV 283 9673.915 SV 615 9660.090 SV 282 9666.030 SV 299 9666.704 SV 305 9671.688 SV 583 9673.069 SV 283 9673.920 SV 615 9660.180 SV 282 9666.040 SV 299 9666.705 SV 305 9671.846 SV 583 9673.081 SV 283 9673.940 SV 615 9660.190 SV 282 9666.050 SV 299 9666.706 SV 305 9671.848 SV 583 9673.082 SV 283 9673.953 SV 615 9660.200 SV 280 9666.053 SV 299 9666.707 SV 305 9672.140 SV 552 9673.083 SV 283 9673.983 SV 615 9660.210 SV 616 9666.060 SV 299 9666.711 SV 305 9672.141 SV 552 9673.084 SV 283 9673.995 SV 615 9660.220 SV 616 9666.063 SV 299 9666.712 SV 305 9672.142 SV 552 9673.085 SV 283 9674.004 SV 289 9660.235 SV 583 9666.070 SV 299 9666.722 SV 305 9672.143 SV 552 9673.086 SV 283 9674.006 SV 289 9660.245 SV 583 9666.073 SV 299 9666.723 SV 305 9672.144 SV 552 9673.089 SV 283 9674.008 SV 289 9660.255 SV 583 9666.080 SV 299 9666.724 SV 305 9672.146 SV 552 9673.192 SV 284 9674.046 SV 288 9660.265 SV 583 9666.090 SV 299 9666.730 SV 305 9672.148 SV 552 9673.193 SV 284 9674.048 SV 288 9660.280 SV 281 9666.100 SV 299 9666.740 SV 305 9672.150 SV 552 9673.194 SV 284 9674.056 SV 616 9660.380 SV 281 9666.110 SV 299 9666.753 SV 305 9672.156 SV 552 9673.195 SV 284 9674.058 SV 616 9660.460 SV 282 9666.120 SV 299 9666.754 SV 305 9672.158 SV 552 9673.405 SV 286 9674.100 SV 278 9660.470 SV 282 9666.130 SV 299 9666.756 SV 305 9672.160 SV 552 9673.406 SV 286 9674.102 SV 271 9660.480 SV 282 9666.133 SV 299 9666.757 SV 305 9672.161 SV 552 9673.408 SV 286 9674.104 SV 271 9660.490 SV 282 9666.140 SV 299 9666.800 SV 298 9672.162 SV 552 9673.426 SV 286 9674.122 SV 271 9660.610 SV 270 9666.143 SV 299 9666.810 SV 298 9672.163 SV 552 9673.428 SV 286 9674.124 SV 271 9660.620 SV 270 9666.150 SV 299 9666.820 SV 298 9672.164 SV 552 9673.436 SV 285 9674.152 SV 271 9660.700 SV 281 9666.160 SV 299 9666.830 SV 298 9672.166 SV 552 9673.438 SV 285 9674.154 SV 271 9660.710 SV 281 9666.170 SV 299 9666.840 SV 298 9672.167 SV 552 9673.444 SV 284 9674.162 SV 271 9660.780 SV 281 9666.180 SV 299 9666.850 SV 298 9672.168 SV 552 9673.445 SV 284 9674.164 SV 271 9660.880 SV 281 9666.190 SV 299 9666.900 SV 298 9672.169 SV 552 9673.448 SV 284 9674.172 SV 271 9660.970 SV 286 9666.200 SV 299 9666.910 SV 298 9672.170 SV 552 9673.454 SV 285 9674.174 SV 271 9660.980 SV 270 9666.210 SV 299 9666.915 SV 75 9672.176 SV 552 9673.456 SV 285 9674.182 SV 271 9661.000 SV 648 9666.213 SV 299 9666.920 SV 298 9672.178 SV 552 9673.458 SV 285 9674.184 SV 271 9661.020 SV 648 9666.220 SV 299 9666.925 SV 75 9672.180 SV 552 9673.464 SV 284 9674.192 SV 271 9661.040 SV 648 9666.223 SV 299 9666.930 SV 298 9672.181 SV 552 9673.465 SV 284 9674.194 SV 271 9661.050 SV 649 9666.230 SV 299 9666.955 SV 75 9672.182 SV 552 9673.468 SV 284 9674.196 SV 288 9661.060 SV 648 9666.240 SV 299 9666.965 SV 75 9672.183 SV 552 9673.476 SV 285 9674.198 SV 288 9661.080 SV 648 9666.250 SV 299 9670.006 SV 78 9672.184 SV 552 9673.478 SV 285 9674.306 SV 291 9661.100 SV 648 9666.260 SV 299 9670.106 SV 78 9672.186 SV 552 9673.484 SV 284 9674.308 SV 291 9661.120 SV 648 9666.270 SV 299 9670.108 SV 78 9672.187 SV 552 9673.485 SV 284 9674.340 SV 290 9661.140 SV 648 9666.280 SV 299 9670.206 SV 79 9672.188 SV 552 9673.488 SV 284 9674.346 SV 291 9661.150 SV 649 9666.290 SV 299 9670.208 SV 79 9672.190 SV 552 9673.504 SV 285 9674.348 SV 291 Rittal Catalogue 34 733 List of model numbers 9674.350 to 9785.042 Model No. Page Model No. 9674.350 SV 290 9676.188 SV 9674.356 SV 290 9676.196 SV 280 9674.362 SV 291 9676.198 SV 280 Page 280 9674.366 SV 291 9676.200 SV 274 9674.380 SV 292 9676.210 SV 274 9674.381 SV 292 9676.503 SV 289 9674.400 SV 293 9676.504 SV 289 9674.405 SV 293 9676.505 SV 289 9674.406 SV 293 9676.520 SV 273 9674.408 SV 293 9676.526 SV 273 9674.410 SV 293 9676.528 SV 273 9674.415 SV 293 9676.540 SV 273 9674.416 SV 293 9676.546 SV 273 9674.418 SV 293 9676.548 SV 273 9674.430 SV 293 9676.621 SV 272 9674.435 SV 293 9676.641 SV 272 9674.436 SV 293 9676.700 SV 273 9674.438 SV 293 9676.710 SV 273 9674.480 SV 274 9676.730 SV 273 9674.485 SV 294 9676.747 SV 273 9674.488 SV 294 9676.748 SV 273 9674.550 SV 555 9676.749 SV 273 9674.560 SV 555 9676.806 SV 273 9674.701 SV 284 9676.807 SV 273 9674.702 SV 284 9676.808 SV 273 9674.703 SV 284 9676.809 SV 273 9674.704 SV 284 9676.810 SV 273 9674.706 SV 284 9676.811 SV 273 9674.761 SV 288 9676.812 SV 273 9674.762 SV 288 9676.813 SV 273 9674.782 SV 288 9676.814 SV 273 9675.100 SV 274 9676.815 SV 273 9675.210 SV 289 9676.816 SV 273 9675.212 SV 289 9676.817 SV 273 9675.218 SV 289 9676.819 SV 273 9675.220 SV 289 9676.831 SV 273 9675.230 SV 289 9676.832 SV 273 9675.232 SV 289 9676.910 SV 274 9675.240 SV 289 9676.912 SV 274 9675.242 SV 289 9676.961 SV 280 9675.840 SV 274 9676.962 SV 280 9676.000 SV 295 9676.963 SV 280 9676.002 SV 271 9676.966 SV 280 9676.004 SV 271 9676.967 SV 280 9676.006 SV 272 9676.968 SV 280 9676.007 SV 272 9676.971 SV 269 9676.008 SV 272 9676.972 SV 269 9676.017 SV 272 9676.973 SV 269 9676.019 SV 272 9676.976 SV 269 9676.020 SV 271 9676.977 SV 269 9676.021 SV 271 9676.981 SV 269 9676.022 SV 271 9676.982 SV 269 9676.023 SV 271 9676.983 SV 269 9676.024 SV 271 9676.986 SV 269 9676.025 SV 271 9676.987 SV 269 9676.026 SV 271 9785.040 CS 565 9676.027 SV 271 9785.042 CS 565 9676.041 SV 272 9676.046 SV 272 9676.048 SV 272 9676.052 SV 272 9676.054 SV 272 9676.056 SV 272 9676.058 SV 272 9676.059 SV 272 9676.186 SV 280 734 Rittal Catalogue 34 Index A B Accessories – for cast aluminium enclosures GA 29 – for Data Rack 682 – for Maxi-PLS/Flat-PLS 280 – for Power System Module 413 – Hygienic Design 173 – TopConsole 117 Accommodation system, 2 U – for LSA installation kit 699 Acoustic components – for signal pillars, modular 719 Acrylic glazed cover 557 Adaptor – 3U 690 – Circuit-breaker, 3-pole, 60 mm 226 – for connector cut-outs 540 – for levelling feet 522 – for L-shaped mounting angles 632 – for twin castors 523 – Metric to 482.6 mm (19˝) 690 – OM 219, 222, 224 – TS for wiring systems 626 Adaptor bracket – for TS 618 Adaptor for support arm system 157, 159 Adaptor kit, 3 U 690 Adaptor pieces, 482.6 mm (19˝) – for TS, SE 684 Adaptor power pack – for LED system light 638 Adaptor rail – for PS compatibility 610 Adaptor sections, 482.6 mm (19˝) – for TS 683 – for TS electronic enclosure 684 Adaptor sleeve for Flex-Block 522 Add-on cover 433 Adhesive measurement strip, 482.6 mm (19˝) 686 Adjacent door latch for TS 566 AE – Compact enclosures 46 – Wall-mounted enclosure 104 AE Laser Express 495 Air baffle plate 692 Air circuit-breaker modules ISV 301 Air circuit-breaker support rails 286 Air diverter 376 Air duct adaptor 374 Air duct system – for roof-mounted cooling units and air/water heat exchangers 374 Air/air heat exchangers 330 – TopTherm 329 Air/water heat exchangers 358, 359, 360 – Wall-mounted 354 Aisle containment 435 Alternate frame, magnetic 579 Aluminium rivet 664 Aluminium strip TP 117, 701 Angle adaptor 90° 158 Angle bracket PS 620 Angle piece 621 Angular baying brackets 545, 546 Angular connector for Flat-PLS 273 Arc chambers – for NH disconnectors 263 Assembly block for TS 610 Assembly kit – for fuse-switch disconnector section 290 Assembly parts – for system punchings 644 Assembly screws 695 Assembly tool – for HD cable gland 659 Attachment – for wall mounting HD 172 – Pole clamp 589 Attachment for punched section with mounting flange TS 606 Base – for tubular door frame 714 Base configuration rail for CM 608 Base isolators 251 Base mount 524 Base mounting bracket – for cast feet 167 Base mounting plate – for base/plinth 516 Base trays – for Mini-PLS 206 – for RiLine 256 – Infill 256 Base/plinth – Complete, sheet steel 519 – Complete, stainless steel 519 – for areas at risk from earthquakes 643 – Stationary 517 Base/plinth adaptor – for levelling feet 522 – for twin castors 523 Base/plinth baying brackets 514 Base/plinth cap 517 Base/plinth components – Front and rear, sheet steel 513 – Front and rear, stainless steel 518 Base/plinth trim panels – Side, sheet steel 514 – Side, stainless steel 518 Base/plinth trim, modular 518 Basic modules – CMC III Processing Unit 448 – CMC III Processing Unit Compact 448 Baying attachment 547 Baying brackets – E-Cu for busbars 649 – for TS base/plinth 514 – for TS/TS and TS/PS 546 Baying clamp 543, 544 – for back-to-back mounting 547 Baying clip for Flex-Block 511 Baying connector – for Data Rack 682 – for TS 544, 548 Baying cover – top 548 – vertical 547 Baying frame, screw-fastened, for TS, stainless steel 535 Baying kit – for KL, AE 548 Baying seal, EMC 640 Baying systems 542 – Electronic enclosures 73 – EMC enclosures 80 – Modular enclosures 76 Baying systems TS 8 62 – 80 – Busbar enclosures 79 – Distribution enclosures 75 – Fuse-switch-disconnector enclosures 78 – Sheet steel, IP 66/NEMA 4 74 – Stainless steel 182 – Stainless steel, IP 66/NEMA 4X 183 Bit HD 172 Blanking covers – for fan-and-filter units/outlet filters 372 – for NH slimline fuse-switch disconnectors 282 – ISV 304 Blanking panel 696 Blanking plates, 482.6 mm (19˝) 692 Bottom-mounted adaptor – for enclosure internal thermostat and hygrostat 380 Box terminals 263 – for NH slimline fuse-switch disconnectors, size 1 to 3 264 Bracket – Wall bracket KS 588 – Wall bracket TS/SE 588 Bracket/spacer 621 Rittal Catalogue 34 Brush strip 657 – Vertical 693 Built-in keyboard 482.6 mm (19˝)/4 U 708 Bus enclosures BG 36, 39 – Stainless steel 178 BUS system SK 382 Busbar adaptor – for Mini-PLS 207 Busbar claws – for Flat-PLS 272 Busbar connection adaptor – Mini-PLS 206 Busbar connectors 254 – PLS 254 Busbar modules ISV 302, 303 Busbar stabilser bar Flat-PLS 271 Busbar support – 1 and 2-pole 251 – Flat-PLS 271 – for 100/150/185 mm bar systems 278 – for 40 mm bar systems 206 – for 60 mm bar systems 212, 215 – for flat busbars 212, 271, 278 – for fuse-switch disconnector section 293 – for stabiliser bar 271 – Maxi-PLS 268 – Mini-PLS 206 – PLS 214, 215 – RiLine 212, 215 Busbar systems – 40 mm 206 – Flat-PLS 271 – Mini-PLS 206 – Ri4Power 268 Busbar terminals – for NH slimline fuse-switch disconnectors, size 1 – 3 264 Busbars – Cover sections 253 – CUPONAL 252 – E-Cu 252, 253 – for fuse-switch disconnector section 293 – for T-connector sets 289 – Gland 270 – Maxi-PLS 268 – Mini-PLS 206 – PLS 253 Bus-mounting fuse bases – 60 mm 236 – D-Switch 237 – Mini-PLS 207 C C rails 612, 613 – 30/15 612 – for cable chamber enclosures 616 – for TS, SE 613, 616 Cable attachment 667 Cable chamber for TS 515 Cable clamp rails – C rail 665 – Depth-variable 669 – for TS and 482.6 mm (19˝) mounting frames 669 – Mounting angle 665 Cable clamp strap 458 Cable clamp, variable 669 Cable clamping bracket 666 Cable clamps – for C rails 666 – for cable clamp rails 665 Cable conduit/cable conduit holder 666 Cable duct 673 – for mounting plate 664 – for vertical TS section 663 Cable entry – on gland plate for TS, CM, TP 652 – on gland plate for TS, SE, CM, TP 651 Cable entry gland 584 Cable entry grommets 651 Cable entry module CP-L, round 662 735 Index Cable entry panel – 482.6 mm (19˝) Cable entry plates Cable finger Cable gland plates – Metal – Plastic Cable glands – Brass – EMC – for IW worktops – Polyamide – Stainless steel, HD Cable lock PSM Cable management duct – horizontal, 482.6 mm (19˝) Cable management panel – 2U – with cable routing bars Cable management panel, 2 U Cable manager Cable retainer Cable route Cable routing – Snap-in Cable routing bars Cable routing channel – 482.6 mm (19˝) Cable set for component adaptors Cable shunting ring Cable support, hinged Cable ties Cable tray, 2 U Cables AWG 10 Cam lock HD Cam locks – for operating panel Captive nuts M5/M6 Captive nuts/threaded blocks Cast aluminium enclosures GA Cast feet Castors CD/disk box Central earthing point Chillers – for IT cooling – for wall-mounting – TopTherm Circuit-breaker component adaptor – 3-pole Clamp rails for cables Clamps – for 60 mm bar systems – Maxi-PLS Clamp-type terminal connection – for NH slimline fuse-switch disconnectors, size 00 Claw with threaded insert Clipboard Clips for gland plate CM base configuration rail CMC III – Accessories – CAN bus connection cable – CAN bus DRC – CAN bus Unit – I/O Unit – Power unit – Processing Unit – Processing Unit Compact – Sensors for direct connection Combination angle – E-Cu Comfort handle – with code Comfort Panel Command panel configurator Command panel housings with door – Stainless steel Compact enclosures – AE – AE, stainless steel – HD 736 677 650 674 655, 656 653, 654 658 642 660 658 659 413 676 674 675 675 676 670 265, 623 672 668 673 675 260 670 633 667 676 260 172 570 559 694 624 28, 29 519 522 576 645 361 441 363 361, 364 226 665 257 269 264 273 703 524 608 454 457 462 448 449 449 450 450 451 546 649 460, 564 566 124, 125 497 189 46 – 49 179 171 Compact infeed for Maxi-PLS 269 Compact light 636 Compact Panel 133 – Wall mounting bracket 590 Compact swing frame – for AE 681 Compact system enclosures CM 50 Compartment divider – for TS 284, 285 – Mounting bracket 286 Compartment side panel modules – for cable connection space 283 – for TS 283 Complete earthing kit – Extension kit 645 Component adaptor – Circuit-breaker, 3-pole 226 – Mini-PLS 208, 209 – RiLine60 234 – with connection cable 219 – with plug-in cable outlet 224 – with tension spring clamp 222 Component shelf – 1 U, static installation, 19˝ 630 – 2 U, static installation 631 – 482.6 mm (19˝) installation 629 – for frame attachment 627, 628 – Installation kit 632 – Pull-out 630 – Pull-out, TS, PC, IW 627 – Static installation 630 – Static installation, TS, PC, IW 628 Condensate collecting bottle 377 Condensate discharge 533 Condensate evaporator, electric 377 Condensate hose 377 Condenser unit 433 Conductor connection clamps 257 Connection accessories – for LED system light 638 Connection adaptor 157 – for signal pillar, LED compact 716 – RiLine 216 Connection adaptor expansion set 218 Connection block 258 Connection brackets 261, 274, 277 Connection cable – AWG 260 – CAN bus 457 – for LED system lights 638 – for power pack, TFT monitor 706 – for PSM busbar 413 Connection cable/extension 457 Connection components – for Maxi-PLS/Flat-PLS 274, 277 – for signal pillars, modular 717 Connection console 156 – VESA 75/100 156 Connection hose 433 Connection pin 260 Connection plates 158 – for 150 mm busbar systems 279 – for Flat-PLS 273 – for Maxi-PLS 269 Connection space cover – for NH disconnectors 263 – for NH slimline fuse-switch disconnectors, size 00 264 Connection space extenders, side – for bus-mounting fuse bases 262 Connection terminal blocks ISV 300 Connection terminals 257 – for Flat-PLS 273 – for Maxi-PLS 269 Connector – Enclosure surface connector 703 – for busbars 254 – for enclosures 589 – for frame 590 – for TS punched rail 17 x 17 mm 622 Connector gland 660, 662 – Sealing frame 661 – Sealing modules 661 Connector grommets 651 Connector kits – for Flat-PLS 273 Connector pieces – for TS punched rail 17 x 17 mm 622 – Frame connector piece for TS 622 Consoles – One-piece consoles TP 115 – TopConsole 117 – Universal consoles 116 Contact cutter 642 Contact hazard protection covers – for bus-mounting fuse bases 262 – for fuse-switch disconnector section 291 – for TS 281, 282 Contact hazard protection modules ISV 299 Contact makers E-Cu 269 – for Flat-PLS 273 Contact paint 642 Contact washers 644 Control unit for EC fan-and-filter units 380 Control units for CMC III Processing Unit 451 Cooling medium for chillers 378 Cooling units – Roof-mounted 346 – Wall-mounted 335, 336, 337,339, 341, 343 Copper bars – Laminated 255 – Maxi-PLS 268 – Mini-PLS 206 Copper busbars – E-Cu 252 – PLS special busbars 253 Corner connectors – for TS punched rail 17 x 17 mm 622 Corner handle 702 Corner pieces, Flex-Block 511 Coupling set mounting kit 288 Courtesy light 635 Cover cap – for TS base/plinth components 517 Cover hinge – for KL 574 Cover plates – for connector cut-outs 540 – for fan panels FlatBox 440 – for support arm connection 704 Cover retainer – for KL 574 Cover section for – Base tray 256 – Busbars 253 – Flat-PLS 272 – Maxi-PLS 268 – Mini-PLS 206 Cover strips – ISV 304 Covers – Acrylic glazed 557 – for busbar claws 272 – for bus-mounting fuse bases 262 – for connection clamps 257 – for distribution busbar 292 – Magnetic 693 – Maxi-PLS 282 – with door for TS 540 Covers, side – for bus-mounting fuse bases 262 CP housing couplings – for desktop mounting 160 Crane bracket 546 Cross members – Adjustable 520 – RiLine busbar systems 256 Cross rails for TS, SE – ISV 305 Cross-brace – for mounting plates, for TS, SE 595 CUPONAL busbars 252 Current converter – for NH slimline fuse-switch disconnectors 265 Rittal Catalogue 34 Index D Data Centre Container DCC 472 Data Rack 96 DCIM – Data Center Infrastructure Management 499 Depth extension frame – ISV 304 Depth stays – for Data Rack 682 – ISV 305 Device modules – Form 1 281 Digital enclosure internal temperature display and thermostat 379 Direct connection terminals for Flat-PLS 273 Disconnector cross-member 300 Disconnectors – Size 00 to 3 240 – Size 00 to 3, with electromechanical fuse monitoring 244 – Size 00 to 3, with electronic fuse monitoring 242, 248 – Size 000 207, 239 Display board with wall bracket 703 Distribution busbar 289 – for fuse-switch disconnector section 293 Distribution busbar cover – for fuse-switch disconnector section 292 Distribution enclosures 75 Distributor frame – Data Rack 682 Distributor racks – Data Rack 96 Divider panel – for fuse-switch disconnector section 291 – for Maxi-PLS 270 – for module plates TS 538 – for TS 537 Divider panel seal, EMC 640 Dividing plates – for fuse-switch disconnector section 291 Document clip, magnetic 579 Door – Comfort handle 460 – Control module 460 – Control system 459 – Kit 460 – Switch 460 Door latch mechanism – for bayed suites 541 Door stay for escape routes for TS 578 Door-operated switch 638 Drawer – 482.6 mm (19˝) 708 – 482.6 mm (19˝) to accommodate excess cable length 674 – 482.6 mm (19˝), for keyboard and mouse 710, 711 – for TS 554 – Tray 628 Drawer, 2 U, 3 U – 482.6 mm (19˝) 691 Dust guard trim – for AE, CM, EB, KL, BG 581 – for TS, SE 581 E Earth clamps, EMC Earth rails Earth straps Earthing braid Earthing kit – Complete, for TS – for earth rail – for KL – KE, for KL, AE, TS – Pre-assembled, for TS Rittal Catalogue 34 642 646, 647 644 644 645 647 646 646 647 Earthing plate 645 Earthing point, central 645 Earthquake base/plinth 643 Earthquake kit, TS 8 643 E-Box EB 34 Edge cover section 272 Edge protection 660 EL wall-mounted enclosures, 3-part 100, 103 Electric condensate evaporator 377 EMC – Baying systems TS 8 80 – Cable glands 642 – Earth clamps 642 – Gland plates 641 – Shield bus 641, 642 – Shielding bracket 641 – Side panels 640 EMC seals – Baying seal 640 – Divider panel seal 640 Enclosure – Heaters 366, 367 – Internal fan, for TS 373 – Internal temperature display and thermostat, digital 379 – Internal thermostat 379 – Key 573 – Key, Hygienic Design 172 – Light 637 Enclosure connector, adjustable 589 Enclosure flange 167 Enclosure for tower PC 119 Enclosure panel holder, internal – for TS 535 Enclosure reinforcement 167 Enclosure surface connector 703 Enclosure systems – Busbar enclosures 79 – Distribution enclosures 75 – Fuse-switch-disconnector enclosures 78 – Modular enclosures 76 – PC 119 Enclosures, SV-TS 8 – Busbar enclosures 79 – Fuse-switch-disconnector enclosures 78 – Modular enclosures 76 End cover – Flat-PLS 272 – for 100 mm busbar system 279 – Maxi-PLS 268 – Mini-PLS 206 – PLS 214, 215 – RiLine 212, 215 End support – for fuse-switch disconnector section 293 – Maxi-PLS 268 Energy-Box 425 Entry grommets for cables 651 Entry grommets for connectors 651 Equipment support connector – ISV 305 Ergoform-S lock system 568 ESD connection point 647 Ex enclosures – Plastic, empty enclosure with hinged door 194 – Stainless steel, empty enclosure with hinged door 193 – Stainless steel, empty enclosure with screw-fastened cover 192 Expansion connector PLS 254 Extension cable 457 Extension cable RJ 12 458 Extension kit – for complete earthing kit 645 – for earth rail, vertical 647 Eyebolts 586 F Fan cross member 439 Fan expansion kit 438 – for fan cross member TS 439 Fan module 434 Fan mounting plate 437 – for DK-TS 438 Fastener for support arm connection 704 Fastening bolts for base/plinth 516 Fastening bolts for component shelves 633 Feet 520, 521 Fibre-optic – Breakout box, 1 U 697 – Cable management panel 677 – Patch panels 697, 698 – Shunting ring 671 – Splicing boxes and accessories 697, 698 Filler pieces for busbar support Flat-PLS 272 Filter holder – for roof vent 373 Filter mats – for chillers 370 – for climate control door/section door 370 – for cooling units 369 – for Flex-Block 517 – for heat exchangers 370 – for recooling systems 370 – for tangential fans/front outlet grilles 369 Fine filter mats – for fan-and-filter units 371 Fire alarm and extinguisher system DET-AC 473 Fitting for air/water heat exchanger 378 Flat air duct system 375 Flat copper bar system 213 Flat duct extension 375 Flat screen 706 FlatBox – Design with 482.6 mm (19˝) mounting angles 98 – Design with 482.6 mm (19˝) mounting frame 99 Flat-PLS – Busbar systems 271 – Connection components 274 Flat-PLS busbar systems 273 Flat-PLS connection components 277 Flex-Block 508 – Base/plinth system 508 – Corner pieces 511 – Trim panels 511 Flow regulator valve 378 Foam cable clamp strip, self-adhesive 652 Folding keyboard 708 Folding lever handle – for CM 565 Fold-out tray – for keyboard and mouse 708 Frame connector – for Comfort Panel 590 Frame connector piece – for TS punched rail 17 x 17 mm 622 Front outlet grille 2 U – for tangential fans 372 Front panels – for Comfort Panel and Optipanel 704 – for Compact Panel 704 Front trim panels – Bottom 553 – for fuse-switch disconnector section 290 – Top 553 Front-mounting cage nut, 482.6 mm (19˝) 695 Fuse bases – 60 mm 236 – D-Switch 237 Fuse holder RiLine Class 249, 250 Fuse-switch disconnector – Size 000 207 737 Index Fuse-switch disconnectors – Size 00 to 3, with electronic fuse monitoring Fusible elements – Mini-PLS 248 207 G Gas pressurised spring – for viewing window 557 Gland plate module – for side cable entry 533 – One-piece, with brush strip 532 – Two-piece, with brush strip 532 – Vented 532 Gland plates – EMC 641 – for CM, TP 525, 527 – for compartment divider with duct 285 – for side panel modules 284 – for TS-IT 528, 531 – Metal 655 – Plastic 653, 654 – with membranes, plastic 654 Glazed door – for TS, TS-IT 549 – for TS, TS-IT, SE 550 Grommets – for cable entry 651 – for connector entry 651 Guide – for mounting plate 594 Guide frame – for Vario rack-mounted fan 384 H Handle adaptor Handle set – for Comfort Panel – for Optipanel Handles – Comfort handle with code – Corner handle – Folding lever handle – for component shelves – for mounting plates – Plastic handles – T handles – U handle Heat exchangers – Air/air heat exchangers TopTherm Hinge attachment – for partial mounting plate TS, SE Hinge pin remover Hinged cable support Hinged lid for interfaces Hinges – 130°/180° – Exterior, for GA – for blanking plates – for PK – for TS side panel Holder – for cable conduit – for protective bar – for TFT Horizontally hinged FT stay Hose-proof hood Housing coupling – for desktop mounting Human/machine interface Hygienic Design HD – Accessories – Bit – Cable gland 738 549 701 700 700 566 702 565 633 595 569 569 702 329 597 574 633 715 574 29 692 27 535 666 551 707 557 372 160 497 173 172 659 – Cam lock – Compact enclosures HD – Enclosure key – Levelling feet – Rails for interior installation – Terminal boxes HD – Wall spacer bracket Hygrostat 172 171 172 172 173 170 172 380 I Identification strip 558, 581 Incandescent lamps – for steady and flashing light components 718 Industrial Workstations 120, 121 – Base for tubular door frame 714 – Cast feet 519 Infill panels – for adaptor sections 684 Insert strips – for circuit-breaker component adaptors 261 – for Mini-PLS component adaptors 258 – for OM adaptor/support 259 Inserted screw nuts M12 253, 649 Inserts for busbar supports 278 Installation bracket for mounting angles – TS 685 Installation examples – System rails 598 Installation kit – Depth-variable 631 – for component shelves 482.6 mm (19˝) 631 – for component shelves and drawers, with 482.6 mm (19˝) adaptor sections in TS 691 – for mounting angles 685 – for mounting plates TS, SE, back-to-back 593 Installation modules 299 Integrated louvres 373 Interconnecting cables – for lights 638 Interface board 381 Interface extension with wall connection and built-in RJ 45 module 714 Interface flaps – Modular 715 Interface for CMC II sensors 451 Interior installation – Rails for AE 605 – Rails for CM, TP 605 Internal latch – for side panel, lockable 536 IP 66/NEMA 4 – System enclosures SE 8 83 IP 66/NEMA 4X – Baying systems TS 8 182 – System enclosures SE 8 185 Isolator door cover 541 ISV – Blanking cover 304 – Cover strips 304 – Depth extension frame 304 – Distribution enclosures 75, 304 – for disconnectors, size 00 304 – Wiring brackets 304 IT power distribution 408, 409, 422 IT power supply 408, 409, 422 J Junction box – with multi-functional bracket 424 K Keyboard – Built-in keyboard with touchpad – Pull-out Keyboard drawer Keyboard support Kit for separate frame TS KVM switch 708 707 710, 712 709 626 461 L Label panel – for signal pillars, modular 719 Laminated copper bars 255 Latch for adjacent door TS 566 Levelling component for TS base/plinth 516 Levelling feet 520, 521 – Hygienic Design 172 Lid for interfaces 715 Lights 635 – 1U 637 – Compact light 636 – Courtesy light 635 – LED 637 – Standard light 635 – System lights 634 Liquid Cooling Package – for industry 360 – LCP Inline CW 429 – LCP Inline DX 432 – LCP Rack CW 428 – LCP Rack DX 431 – LCP T3+ CW 430 Lock components for TS, TS-IT, SE 550 Lock cover 571, 572 Lock cylinder inserts 571 Lock inserts 565, 570 Lock nut, stainless steel 659 Lock systems – for compact enclosures, sheet steel 560 – for console systems and industrial workstation, sheet steel 562 – for enclosures and cases, stainless steel 563 – for large enclosures, sheet steel 561 Lockable and adjacent door for TS 550 Locking bar latch 566 Longitudinal connector – Flat-PLS 272 – Maxi-PLS 268 M Master/slave adaptor for thermoelectric cooler Maxi-PLS – Busbar systems – Connection components Maxi-PLS busbar systems Maxi-PLS connection components Measurement bar PSM Membrane gland plate Metal filter for climate control units Metal gland plates Metal multi-tooth screws Meter mounting board module ISV Micro Data Centre – Compact split cooling solution – Level B – Level E – Outdoor split cooling solution – Outdoor split cooling solution with inverter technology 382 268 274 270 277 410 654 370 655 625 302 469 467, 468 466 470 471 Rittal Catalogue 34 Index Micro-switch – for NH disconnectors/NH slimline fuse-switch disconnectors 263 Mini-comfort handle 567 Mini-fan 373 Mini-PLS busbar systems 206 Modular climate control concept – Cooling module “Blue e” 350 – Section doors 351 Modular enclosures – SV-TS 8 76 Modular front design 552 Module plates 539 Monitor frame 558 Monitor, flat 706 Monitor/keyboard unit, 1 U 461 Mounting angles – Additional fastening attachment 686 – C rails 612, 613, 616 – for FlatBox 686 – for TS 685 – Installation kits 685 Mounting angles for AE – ISV 305 Mounting angles for TS, SE – ISV 305 Mounting block for AE 623 Mounting bracket 617, 619 – for air circuit-breaker support rail 286 – for compartment divider 286 – for CP 617 – for Ri4Power 282 Mounting clip for support rails 614 Mounting components – for signal pillar 720, 721 Mounting kit – for AE 298 – for air circuit-breaker installation 286 – for Comfort Panel 705 – for Optipanel 705 – for TS, SE 298 – Magnet 636 Mounting kit PSM – for busbar 413 Mounting kit, 2 U 689 Mounting kit, coupling set 288 Mounting panel 482.6 mm (19˝), 2 U 693 Mounting plates 616, 617 – Adjustment bracket for KS 594 – Attachment 592, 593 – Attachment for CM 595 – Cross-brace for TS, SE 595 – for cast aluminium enclosures GA 29 – for KL and KL-HD 591 – for polycarbonate enclosures 27 – for Ri4Power Form 1-4 287 – for TS 591 – Infill for TS 591 – Modules ISV 299 – Slide rail for TS 594 – Transport handles for TS, SE 595 Mounting unit 458 Mounting unit, 1 U 458 Mouse holder 713 Mousepad support 709, 712, 713 Multiple lock 572 Multi-tooth screws 625, 694 N NEMA 4 – Baying frame – System enclosures SE 8 NEMA 4X – Baying frame – Baying systems TS 8 – System enclosures SE 8 – Wall-mounted cooling units Rittal Catalogue 34 535 83 535 182 185 344 552 Perforated mounting strips – for AE stainless steel 576 – for partial doors 553 Perforated plate – Base/plinth trim, modular 518 Pillar, small 166 PinBlock 260 PinBlock Plus 260 Pivot CP-L 161 Plastic – Cable gland plates 653 – Gland plates 654 – Handles 569 Plastic enclosures KS 52 Plate – for base mounting 516 Plate clamps 257 PLS busbar systems 214, 215 PLS busbars – for T-connector sets 289 Pole clamp 589 Polycarbonate enclosures PK 24, 26 Potential equalisation 645 Potential equalisation rails 646, 647 Potential equalisation star 645 Power Control Unit 412 Power measurement 421 Power pack – for TFT monitor 706 Power supply 422 Power supply unit 457 Power System Module – MID measurement module for CMC III 421 Premium Panel stainless steel – IP 69K 188 Pressure relief stoppers 533 Primer/paint – Contact paint 642 Processing Unit, CMC III 450 Processing Unit Compact, CMC III 450 Programming cable 457 Protective bar – for TS 551 PSM 408, 409 – Busbar 409 – Modules, active 412 – Socket modules 411 Punched rail – 17 x 17 mm for TS 615 – 18 x 38 mm, TS, SE 609 – 23 x 23 mm, PS 610 – 23 x 73 mm, PS 611 – 25 x 38 mm, TS 608 – Cover, distribution busbar 292 – Distribution busbar cover 292 Punched rails 23 x 23 mm for Flex-Block 611 Punched rails for interior installation AE 605 Punched section with mounting flange – 17 x 73 mm, TS 606, 607, 632 – 23 x 73 mm, PS 612 – 23 x 73 mm, TS 607 – for coupling section 616 Punched section without mounting flange – 23 x 73 mm, PS 611 – 45 x 88 mm, TS, SE 608 287 596 597 537 698 Q Network/server enclosures TS-IT 90 – 95 – with glazed door for rack climate control 92 – with glazed door for rack climate control, IP 55 95 – with glazed door for rack climate control, pre-configured 94 – with vented door for room climate control 90 NH fuse-switch disconnectors 239, 240 – Modules ISV 300 – Size 00 to 3 240, 242, 244 – Size 00 to 3, with electromechanical fuse monitoring 244 – Size 00 to 3, with electronic fuse monitoring 242 – Size 000 207, 238, 239 NH slimline fuse-switch disconnectors – Modules ISV 301 NH slimline fuse-switch disconnectors – Size 00 to 3 246 – Size 00 to 3, with electronic fuse monitoring 248 Nuts 624 – for TS section 618 Nylon loop 667 – Cable holder 668 – Tape 667 – Tape holders 668 O OM adaptor – with plug-in cable outlet – with tension spring clamp OM supports One-piece consoles TP – Sheet steel – Stainless steel Operating housing – for desktop TFT up to 24˝ – Stainless steel – with handle strips Operating panel Optical components – for signal pillars modular Optipanel Outlet filter Overvoltage protection PSM 224 222 225 115 186 132 188 130 559 718 126, 127 372 413 P Paint Pair of mounting angles, second Paper removal flap Partial doors – for TS Partial mounting plates – for TS – for TS, SE – Locatable Partition Patch panels PC – Enclosure systems – Stainless steel PDU PE busbar PE/PEN combination angle Pedestal – Complete – Modular – Open 536 682 713 118, 119 187 416, 420 646 649 Quality management Quick-assembly block Quick-change frame – for roof-mounted cooling units Quick-fit baying clamps 505 621 384 543 165 164 166 739 Index R Rack-mounted fans for 482.6 mm (19˝) 326 Rails – Base configuration rail for CM 608 – for EMC shielding bracket and strain relief 641 – for interior installation 173 – for interior installation AE 605 – for interior installation CM, TP 605 Rain canopies – for AE, CM 580 Rear adaptor for LCP Inline CW 433 Reinforcement – for enclosure 167 Reinforcement bracket – for TS, SE, TP universal console 524 RFID – Aerial 462 – Controller 462 – Tags 462 Ri4Power assembly instructions 295 RiCAD 3D 495 Ride-up roller – for TS, SE, PC 579 RiDiag II 385 RiLine busbar systems – PLS busbars 214 RiLine60 busbar systems 212, 215 – Connection system 279 – Flat busbars 212 RiMatrix S 402 – Building 400 – Container 402 – Security rooms 401 Rittal Power Distribution Rack/Module 408 Rittal Power Engineering 295 RiZone 463 RJ 45 – Installation module and extension 714 Roof mounting screw 585 Roof plate – for TS, SE 583 – for TS, TS-IT 585 – TS for cooling units 383 Roof plate, vented – for TS, TS-IT 585 Roof-mounted fans 325, 437 – TopTherm 324 RTT roof-mounted fan 324 Rubber cable clamp strip 652 S Screen, flat 706 Screw connections – for connection brackets 280 – for Flat-PLS 273 Screws 625, 694, 695 SE 8, system enclosures 81, 83 Second pair of mounting angles 682 Section for cable entry – for TS, CM, TP 652 – for TS, SE, CM, TP 651 Security lock 572 Security rooms 474, 475 Self-adhesive foam cable clamp strip 652 Self-tapping screws 625 Semi-cylinder lock 571 Sensor for speed control 381 Serial installation device modules ISV 299 Server shutdown software 463 Server telescopic slides – for subracks 689 Service socket 424 Shield bus, EMC 642 740 Shielding – Vertical 433 Shunting ring 670 Shunting ring, fibre-optic 671 Side cover section 272 Side panel modules – for cable connection space 283 – for TS 283 Side panels – Divided, for TS-IT 536 – EMC 640 – for cable chamber 515 – for top-mounting module 582 – Lockable, for TS, TS-IT 536 – Screw-fastened, for TS, sheet steel 534 – Screw-fastened, for TS, stainless steel 534 – Screw-fastened, for TS-IT 534 Signal pillars 716, 717 – Optical components 718 Single enclosure SE 8 – Stainless steel, IP 66/NEMA 4X 185 Single-phase connection cable 413 SK BUS system 382 Slide rail, continuous – for Data Rack 682 Slide rails 682 – Depth-variable 687 – for mounting plate TS 594 – for swing frames 681 – Static installation 687 Sliding blocks – for circuit-breaker component adaptor 261 – for Maxi-PLS 269 Sliding nuts Maxi-PLS 269 Small fibre-optics distributors – Polycarbonate 105 Snap-in cable routing 668 Snap-on nut TS 618 SNMP card 434 Socket strips 422 Sockets 424 Software 495 – Server shutdown 463 Spacer rolls 289 Spacers 575 – for Flat-PLS 272 – for RiLine busbar supports 251 – for roof plate TS 586 Spacing element for busbar supports 278 Spare filter mat – for EMC fan-and-filter unit 371 – for filter holder 371 – for thermoelectric cooler 371 Spare key 573 Special busbars – Maxi-PLS 268 – Mini-PLS 206 – PLS 253 Speed control 381 Spring nuts – M5 625 – M6 695 Spring washer 566 Stabiliser – for connector kit 280 Stabiliser bars Flat-PLS 271 Stabiliser for TS-IT 520 Stacking insulator 280 Stainless steel – Base/plinth 519 – Baying systems TS 8 182 – Bus enclosures BG 178 – Cable gland 659 – Command panel housings with door 189 – Compact enclosures AE 179 – One-piece consoles 186 – PC enclosure 187 – Support arm system 140 – Switch housings 176 – Terminal boxes KL 177 – Viewing window 558 Stand systems 164, 166, 167 Standard light 635 Stationary base/plinth 517 Stay – Door stay for escape routes 578 – for door 578 – for trim panel, hinged at the top 554 – for viewing window 557 Stepped collar 662 Stoppers – for roof-mounted cooling units and air/water heat exchangers 376 Straps, earth straps 644 Support – 1 and 2-pole 251 – for flat copper busbars 212, 213, 278 – for Flat-PLS 271 – for keyboards 709 – for laminated copper bars 255 – for Maxi-PLS 268 – for mousepad 709, 712, 713 – for PLS 214, 215 – for small appliances 694 Support arm bracket 90° 158 Support arm configurator 497 Support arm system – CP 180 155 – CP 120 150, 151 – CP 180 154 – CP 40, stainless steel 140 – CP 40, steel 138 – CP 40/60/120/180 156 – CP 60 146, 147 Support arm, height adjustable – for support arm system 120 160 Support bracket 620 Support frame – for DIN rail-mounted devices 288 Support panels – for cover section 256 Support rail modules ISV 299 Support rails 614 – 65 x 42 mm for TS, SE 614 – for air circuit-breakers 286 – for component adaptors 258, 261 – for OM adaptor/support 259 – for stacking insulators 280 – for TS, SE, CM 613 Support strips – for AE 575 – for TS, CM, SE, TP 575, 609 Support unit, 3 U 699 Supports OM 225 Surface connector for enclosures 703 Surplus cable holder 672 SV-TS 8 enclosures 76 Swing frame 678 – Large, with trim panel 680 – Large, without trim panel 679 – Small, for TS 678 – Stay 681 Switch housings – Stainless steel 176 System attachment – for Flat-PLS 271 – for Maxi-PLS 268 – for RiLine 289 System components – Flat-PLS 271, 273 – Maxi-PLS 268, 270 System covers 257 System enclosures SE 8 81 – 83 – Stainless steel 184, 185 System lights 634, 635, 637 System support rails 613 System supports for cable routes 671 System window 556 Rittal Catalogue 34 Index T T handles 569 Tangential fans for 482.6 mm (19˝) 328 T-connector kits for busbar systems – Flat-PLS 273 T-connector piece 622 Technical information 722 Telescopic slides – for component shelves 632 Temperature indicator and thermostat 379 Terminal block, distribution busbar – for fuse-switch disconnector section 294 Terminal box Form 4b 284 Terminal boxes KL 30, 32 – Cover hinge 574 – Cover retainer 574 – Stainless steel 177 Terminal connection – for NH slimline fuse-switch disconnectors, size 00 264 Terminal studs – for Maxi-PLS 269 Terminals – Flat-PLS 273 – for NH disconnectors 263 TFT – Holder 707 – Monitor 706 Therm software 385 Thermoelectric coolers 334 Threaded bolts Maxi-PLS 269 Threaded inserts M6 for KS 625 Three-phase connection cable for PSM busbar 413 Tilting adaptor +/–45° 161 Tilting adaptor +100°/–60° 162 TopConsole system TP 110, 114, 117 – Accessories 117 Top-hat rails 614 Top-mounting module for TS 582 TopTherm – IT roof-mounted cooling units 436 TopTherm fan-and-filter units 316 – EC technology 319 – EMC 321 TopTherm heat exchangers 329 TopTherm roof-mounted cooling units “Blue e” 346 TopTherm wall-mounted cooling units 336 – Horizontal format 335 TopTherm wall-mounted cooling units “Blue e”, NEMA 4X 344 TopTherm wall-mounted cooling units “Blue e” 337, 339, 341 TopTherm wall-mounted cooling units “Blue e”, slimline 343 Toroidal transformer 382 Touchscreen 706 Touchscreen display – for LCP rack, Inline, T3+ 433 TP – Aluminium strip 117, 701 – One-piece consoles 186 – Universal consoles 116 Transport and mounting handle – for TS/SE doors 579 Transport bracket 546 Transport castors – for TS base/plinth 515 Transport handles for mounting plates – for TS, SE 595 Transport kit for TS-IT 522 Tray, drawer tray 628 Trim frame – for slimline cooling units 383 Trim panel – Bottom 553 – Flex-Block 511 – for cast feet 167 – for CM 532 Rittal Catalogue 34 – for fuse-switch disconnector section 290 – for pedestal 167 – for TP 117 – Hinged at the top, for TS 554 – Top 553 TS – Assembly block 610 – Punched rail 608, 609 – Punched section with mounting flange 606, 607 – Punched section without mounting flange 608 – Support strips 609 TS 8 configurator 497 TS 8 enclosures – Door latch 541 – Isolator door cover 541 – Stainless steel 182 Tubular door frame – for TS, TS-IT, SE 549 Twin castors 522 Twin cords – for OM adaptors 260 U U handle U nuts Universal bracket Universal consoles TP – Sheet steel Universal light Universal support – for laminated copper bars Upgrade kit IP 4X USB extension Utility bars, vertically hinged Utility lectern 702 624 623 116 635 255 555 714 709 576 V Variable modular climate control concept Vario rack-mounted fans for 482.6 mm (19˝) Vent attachment – TS Vent cover Ventilated front panels Vertical section VerticalBox Viewing window – for operating panel – Stainless steel Window – System window 556 – Viewing window 557, 558 – Viewing window for operating panel 559 Wiring brackets ISV 304 Wiring plan lectern 576 Wiring plan pockets 577, 578 Wiring trim panel 555 RAL colours Colour RAL Designation 5002 ultramarine blue 5018 turquoise blue 7001 silver grey 7015 slate grey 7022 umbra grey 7024 graphite grey 7030 stone grey 7032 pebble grey 7033 cement grey 7035 pale grey 8019 grey brown 9005 jet black 9006 white aluminium 9011 graphite black 9017 traffic black 551 327 383 440 692 547 97 557 559 558 W Wall angle Wall bracket for TS, SE Wall mounting bracket – for AE – for cast aluminium enclosures – for Compact Panel – for polycarbonate enclosures – Vertically hinged Wall spacer bracket HD Wall-mounted enclosures – AE – EL, 3-part – Small fibre-optics distributors Washers, contact washers Width divider 588 588 587, 588 587 29 590 27 590 172 104 100, 103 105 644 523 We reserve the right to further developments and technical modifications of our products. Such modifications, along with errors and printing errata, shall not constitute grounds for compensation. We refer customers to our Terms of Sale and Delivery. 741 Rittal is present around the globe. We are close at hand to assist you with innovative products and comprehensive services. Harness the power of “Rittal – The System.” ◾ 64 subsidiaries ◾ Around 90 warehouse locations with more than 260,000 m2 of storage space ◾ 11 production sites with around 250,000 m2 of production space ◾ 1,500 patents as a testimony to Rittal’s innovative strength 742 Rittal Catalogue 34 Germany www.rittal.com Greece www.rittal.gr Poland www.rittal.pl Argentina www.rittal.com.ar Hong Kong www.rittal.com.hk Portugal www.rittal.pt Australia www.rittal.com.au Hungary www.rittal.hu Romania www.rittal.ro Austria www.rittal.at India www.rittal-india.com Russia www.rittal.ru Belgium www.rittal.be Indonesia www.rittal.com Singapore www.rittal.com.sg Brazil www.rittal.com.br Ireland www.rittal.ie Slovakia www.rittal.sk Bulgaria www.rittal.bg Israel www.rittal.co.il Slovenia www.rittal.si Canada www.rittal.ca Italy www.rittal.it South Africa www.rittal.co.za Chile www.rittal.cl Japan www.rittal.co.jp Spain www.rittal.es China www.rittal.cn Korea www.rittal.co.kr Sweden www.rittal.se Colombia www.rittal.com.co Lithuania www.rittal.lt Switzerland www.rittal.ch Croatia www.rittal.hr Malaysia www.rittal.com.my Taiwan www.rittal.com.tw Czech Republic www.rittal.cz Mexico www.rittal.com.mx Thailand www.rittal.com/th-en/ Denmark www.rittal.dk Netherlands www.rittal.nl Turkey www.rittal.com.tr United Arab Emirates Dubai www.rittal-middle-east.com New Zealand www.rittal.co.nz Ukraine www.rittal.com.ua Norway www.rittal.no USA www.rittal.us Peru www.rittal.pe Vietnam www.rittal.com.vn Finland www.rittal.fi France www.rittal.fr Great Britain www.rittal.co.uk More international subsidiaries and agencies can be found at www.rittal.com Rittal Catalogue 34 743 Rittal international – Agencies worldwide Germany RITTAL GmbH & Co. KG Postfach 16 62 D-35726 Herborn Phone +49 2772 505-0 Fax +49 2772 505-2319 E-mail: info@rittal.de www.rittal.com Argentina RITTAL S.A. E. Echeverría 1814 – 1604 Florida Buenos Aires Argentina Phone +54 11 4760 6660 Fax +54 11 4730 4670 E-mail: info@rittal.com.ar www.rittal.com.ar Australia/New Zealand RITTAL AUSTRALIA 130 – 140 Parraweena Road Miranda NSW 2228 Phone +61 2 9526 4900 www.rittal.com.au RITTAL NEW ZEALAND 21 Bell Road South Lower Hutt, Wellington Phone +64 4 566 7630 www.rittal.co.nz Austria RITTAL GmbH Laxenburger Straße 246a A-1239 Wien Phone +43 5 99 40-0 Fax +43 5 99 40-99 0 E-mail: info@rittal.at www.rittal.at Bahrain Please contact Rittal Middle East FZE Dubai/U.A.E. Belarus RITTAL UAB Representative office in Belarus Timirazeva 65B – 108 220035 Minsk Republic of Belarus Phone +375 17 2547709 +375 17 2547809 Fax +375 17 2547609 E-mail: a.malinovski@rittal.by www.rittal.by Belgium RITTAL nv/sa Industrieterrein E17/3206 Stokkelaar 8 B-9160 Lokeren Phone +32 9 3539111 Fax +32 9 3556862 E-mail: info@rittal.be www.rittal.be Bolivia HILLER ELECTRIC S.A. Av. El Trompillo N° 573 Casilla 370 Santa Cruz Phone +591 3 351 7547 +591 3 312 0053 Fax +591 3 352 6404 E-mail: mail@hillerelectric.com.bo www.hillerelectric.com.bo Bosnia-Herzegovina SYS Company d.o.o. Sibenska b.b. BiH-71000 Sarajevo Phone +387 33 27 7090 Fax +387 33 27 7092 E-mail: sys@sys.ba www.sys.ba Brazil RITTAL Sistemas Eletromecânicos Ltda. Av. Cândido Portinari, nr. 1174 VI Jaguara 05114-001 São Paulo-SP Phone +55 11 3622 2377 Fax +55 11 3622 2399 E-mail: info@rittal.com.br www.rittal.com.br Bulgaria RITTAL EOOD 7, Iskarsko shouse blvd. Drujba 1, building 7, floor 2 Trade Center Europe p.o.box. № 3; 1592 Sofia Phone +359 2 439 0550 +359 2 889 0055 +359 2 889 0056 Fax: +359 2 4390659 www.rittal.bg Canada RITTAL Systems Ltd. 6485 Ordan Drive Missisauga ON L5T 1X2 Canada Phone +1 905 795 0777 Fax +1 905 795 9548 Toll-free: 1-800-399-0748 E-mail: marketing@rittal.ca www.rittal.ca Chile RITTAL Ltda. Av. Vitacura 5250, oficina 801 Vitacura, Santiago, Chile Phone +56 2 947 7400 Fax +56 2 947 7477 E-mail: info@rittal.cl www.rittal.cl China RITTAL Electro-Mechanical Technology (Shanghai) Co. Ltd. No. 1658 Minyi Road Songjiang District Shanghai, 201612 Phone +86 21 5115 7799 Fax +86 21 5115 7788 E-mail: marketing@rittal.cn www.rittal.cn Colombia RITTAL Ltda. Centro Empresarial Metropolitano Au. Medellín Km 3.4 vía Siberia Módulo 2, Bodega 43 · Cota, Cundinamarca, Colombia Phone +57 1 896 6273 Fax +57 1 896 6907 E-mail: info@rittal.com.co www.rittal.com.co Costa Rica Electribodegas INTEK, S.A. Ofibodegas Terrum, Bodega No. 28 Costado Este del Hotel Hampton Inn Río Segundo de Alajuela Alajuela, Costa Rica Phone +506 2443 2545 Fax +506 2441 8717 E-mail: intekcr@intek-ca.com www.intek-ca.com Croatia RITTAL d.o.o. Samoborska cesta 145a HR-10090 Zagreb Phone +385 1 3794 468 Fax +385 1 3794 468 E-mail: info@rittal.hr www.rittal.hr Czech Republic RITTAL Czech, s.r.o. Ke Zdibsku 182 250 66 Zdiby u Prahy Phone +420 234 099 000 Fax +420 234 099 099 E-mail: info@rittal.cz www.rittal.cz Denmark RITTAL A/S Dybendalsvænget 4 DK-2630 Taastrup Phone +45 70 25 59 00 Fax +45 70 25 59 01 E-mail: info@rittal.dk www.rittal.dk Dubai/U.A.E. Rittal Middle East FZE Office 213-215, Building No. 7, Gold and Diamond Park, PO Box 17599 Dubai, UAE Phone +971 4 3416855 Fax +971 4 3416856 E-mail: info@rittal-middle-east.com www.rittal-middle-east.com El Salvador INTEK EL SALVADOR, S.A. DE C.V. Calle Gabriela Mistral No. 373 San Salvador, El Salvador, C.A. Phone +503 2260 8888 Fax +503 2260 8855 E-mail: inteksv@intek-ca.com www.intek-ca.com Estonia RITTAL UAB branch in Estonia Peterburi str. 49 11415 Tallinn Phone +372 6052531 Fax +372 6052532 E-mail: heiki@rittal.ee www.rittal.ee Finland RITTAL Oy Valimotie 35 PL 134 01510 Vantaa Phone +358 9 413 44 00 Fax +358 9 413 44 10 E-mail: myynti@rittal.fi www.rittal.fi France RITTAL SAS Parc d’activité des Grands Godets 880 rue Marcel Paul CS 20003 94500 Champigny sur Marne Phone +33 1 49 83 60 00 Fax +33 1 49 83 82 06 Parc Galilée, 7 rue Galilée 69800 Saint-Priest Phone +33 4 72 23 12 70 Fax +33 4 72 23 09 33 E-mail : info@rittal.fr www.rittal.fr France-East Sermes S.A. 14, rue des Frères Eberts Boîte Postale 80177 67025 Strasbourg-Cedex Phone +33 3 88 40 72 00 Fax +33 3 88 40 72 49 E-mail: appareillage@sermes.fr www.sermes.fr Great Britain RITTAL Limited Braithwell Way Hellaby Industrial Estate Hellaby Rotherham S Yorks, S66 8QY Phone +44 17 09 70 40 00 Fax +44 17 09 70 12 17 E-mail: information@rittal.co.uk www.rittal.co.uk Greece RITTAL MONOPROSOPI EPE Thessalonikis 98 14342 Nea Philadelphia Athen Phone +30 210 27 17 975-6 Fax +30 210 27 12 398 E-mail: info@rittal.gr www.rittal.gr Guatemala INTEK GUATEMALA, S.A. 4ª Avenida 10-31 Zona 9 Guatemala 01004 Guatemala Phone +502 2507 0500 E-mail: intekgt@intek-ca.com www.intek-ca.com Honduras INTEK HONDURAS, S.A. DE C.V. Ofi-Bodegas Premier Warehouse Complex 100mts antes del Peaje a la Lima Edificio PWC-14B San Pedro Sula Honduras, C.A. Phone +504 2559 4748 +504 2559 4749 +504 2559 4750 Fax +504 2559 4740 E-mail: intekhn@intek-ca.com www.intek-ca.com Hong Kong RITTAL Limited 15/F, Tai Yip Building 141 Thomson Road Wanchai, Hong Kong Phone +852 3178 1300 Fax +852 3178 1370 E-mail: dragon.cheung@rittal.com www.rittal.com.hk Hungary RITTAL Kereskedelmi Kft. 1044 Budapest Ipari Park u.1. Phone +36 1 399 8000 Fax +36 1 399 8009 E-mail: rittal@rittal.hu www.rittal.hu Iceland Smith & Norland Noatuni 4 105 Reykjavik Phone +354 520 3000 Fax +354 520 3011 E-mail: sminor@sminor.is www.sminor.is India RITTAL India Pvt. Ltd. No. 23 & 24 KIADB Industrial Area Veerapura Doddaballapur-561 203 Bangalore District Phone +91 80 33720700 Fax +91 80 33720866 www.rittal-india.com Indonesia PT. Rittal Menara BCA Lantai 50, Grand Indonesia Jl. MH. Thamrin No. 1 Jakarta 10310 - Indonesia Phone +62 21 348 343 65 Fax +62 21 348 343 64 E-mail: info@rittal.co.id www.rittal.com Ireland RITTAL Ltd. Sleaty Road, Graiguecullen Carlow, Ireland Phone +353 59 9182100 Fax +353 59 9132090 E-mail: sales@rittal.ie www.rittal.ie Israel RITTAL Enclosure Systems Ltd. 13, Hatarshish St. Zone 29 P.O. Box 3597 Industrial Park, Caesarea 38900 Phone +972 4 6275505 Fax +972 4 6275535 E-mail: info@rittal.co.il www.rittal.co.il Italy RITTAL S.p.A. S.P. n. 14 Rivoltana, Km 9,5 20060 Vignate (MI) Phone +39 2 959 301 Fax +39 2 9536 0209 E-mail: info@rittal.it www.rittal.it Japan RITTAL K.K. Head Office/Sales & Marketing Shin-Yokohama AK Bldg. 2F 3-23-3 Shin-Yokohama, Kohoku-ku Yokohama, Kanagawa, 222-0033 Phone 0120 998 631 Fax 0120 998 632 E-mail: contact@rittal.co.jp www.rittal.co.jp Jordan Please contact Rittal Middle East FZE Dubai/U.A.E. Rittal international – Agencies worldwide Kazakhstan RITTAL UAB Representative office in Kazakhstan 21 b, Kunayev str., suite 46 050004, Almaty Republic of Kazakhstan Phone +7 727 244-6664 Fax +7 727 244-6663 E-mail: info@rittal.kz www.rittal.kz Korea RITTAL Co., Ltd. Seoul Head Office 3rd Floor Asaan Venture Tower B/D 315-6 Yangjae-Dong Seocho-Gu Seoul 137-896, Korea Phone +82 2 577 6525 Fax +82 2 577 6526 E-mail: rittal@rittal.co.kr www.rittal.co.kr Kuwait Please contact Rittal Middle East FZE Dubai/U.A.E. Latvia RITTAL UAB branch in Latvia Araisu str. 37 1039 Riga Phone +371 7 801614 +371 7 801615 Fax +371 7 801616 E-mail: info@rittal.lv www.rittal.lv Lebanon Please contact Rittal Middle East FZE Dubai/U.A.E. Lithuania RITTAL UAB Meistru str. 8 LT-02189 Vilnius Lithuania Phone +370 52105720 Fax +370 52306665 E-mail: info@rittal.lt www.rittal.lt Luxembourg D.M.E. s.a.r.l. Distribution de matériel électrique Z.A.R.E. Ouest L-4384 Ehlerange Phone +3 52 574344 Fax +3 52 574357 E-mail: dme@dme.lu www.dme.lu Macedonia Siskon System Engineering Taskenska 4A MK-1000 Skopje Phone +389 2 3062 423 Fax +389 2 3061 250 E-mail: siskon@siskon.com.mk www.siskon.com.mk Malaysia RITTAL Systems Sdn Bhd 7, Jalan TPP 1/1A Taman Industri Puchong Batu 12 Jalan Puchong 47100 Puchong Selangor, Malaysia Phone +603 8060 6688 Fax +603 8060 8866 E-mail: sales@rittal.com.my www.rittal.com.my Mexico RITTAL S.A. de C.V. Roberto Gayol 1219-1B Del Valle 03100 México D.F. Phone +52 55 5559 5 369/370 Fax +52 55 5559 4887 E-mail: info@rittal.com.mx www.rittal.com.mx Morocco Please contact Rittal Middle East FZE Dubai/U.A.E. Netherlands RITTAL B.V. Hengelder 56 Postbus 246 6900 AE Zevenaar Phone +31 316 591660 Fax +31 316 525145 E-mail: sales@rittal.nl www.rittal.nl Nicaragua INTEK NICARAGUA, S.A. De Canal 2 Bolonia 1 1/2 cuadras al norte contiguo Libreria D’LEO Casa Amarilla Managua, Nicaragua, C.A. Phone +505 2254 5182 Fax +505 2254 5182 E-mail: intekni@intek-ca.com www.intek-ca.com Norway RITTAL AS Postboks 258 N-1401 Ski Phone +47 64 85 13 00 Fax +47 64 85 13 01 Besøksadresse: Vestveien 18 N-1400 Ski E-mail: rittal@rittal.no www.rittal.no Oman Please contact Rittal Middle East FZE Dubai/U.A.E. Peru RITTAL S.A.C. Mártir Olaya N° 129 Of. 1303 Miraflores (LIMA 18) Perú Phone +51 1 243 2525 E-mail: info@rittal.pe www.rittal.pe Philippines Please contact RITTAL Pte. Ltd. Singapore Poland RITTAL Sp. z o.o. ul. Domaniewska 49 02-672 Warszawa Phone +48 22 310 06 00 Fax +48 22 310 06 16 Tech Info 0 801 380 320 E-mail: rittal@rittal.pl www.rittal.pl Portugal RITTAL – Sistemas Eléctricos e Electrónicos, Lda. Z.I. de Rio Meão Rua 8, no 228 4520-475 – Rio Meão Sta. Maria da Feira Phone +351 25678 0210 Fax +351 25678 0219 E-mail: info@rittal.pt www.rittal.pt Qatar Please contact Rittal Middle East FZE Dubai/U.A.E. Romania RITTAL Sisteme SRL Str. Ardealului, nr. 11A Otopeni, Ilfov, Romania Phone +40 21 351 76 47 Fax +40 21 351 76 45 E-mail: info@rittal.ro www.rittal.ro Russia RITTAL OOO Russia, 125252 Moscow Aviakonstruktora Mikoyana Street 12 (4th floor) Phone +7 495 775 02 30 Fax +7 495 775 02 39 E-mail: info@rittal.ru www.rittal.ru Saudi Arabia Please contact Rittal Middle East FZE Dubai/U.A.E. Serbia Vesimpex d.o.o. Petra Konjovića 12v/C 11090 Beograd Phone +381 11 3510 683 Fax +381 11 3510 903 E-mail: info@vesimpex.rs www.vesimpex.rs Singapore RITTAL Pte. Ltd. 7 Loyang Street Loyang Industrial Estate Singapore 508842 Phone +65 6542 68 18 Fax +65 6542 68 33 E-mail: sales@rittal.com.sg www.rittal.com.sg Slovakia RITTAL s.r.o. Mokráň záhon 4 821 04 Bratislava Phone +421 2 32333911 Fax +421 2 32333910 E-mail: rittal@rittal.sk www.rittal.sk Slovenia RITTAL prodaja stikalnih omar d.o.o. Letališka cesta 16, p.p. 5146 SI-1000 Ljubljana Phone +386 1 54 66 370 Fax +386 1 54 11 710 E-mail: info@rittal.si www.rittal.si South Africa RITTAL Pty. Ltd. 123, Terrace Road Sebenza Edenvale Gauteng South Africa P.O. Box 462 Edenvale Gauteng South Africa 1610 Phone +27 11 6 09-82 94 Fax +27 11 4 52-58 16 E-mail: info@rittal.co.za www.rittal.co.za Spain RITTAL Disprel S.A. Mas Baiona, 40 Polígono Industrial Can Roqueta 08202 Sabadell (Barcelona) Phone +34 937 001 300 Fax +34 937 001 301 E-mail: info@rittal.es www.rittal.es Sweden RITTAL Scandinavian ab Rittalgatan 1 SE-262 73 Ängelholm Phone +46 431 44 26 00 Fax +46 431 44 26 44 E-mail: info@rittal.se www.rittal.se Switzerland RITTAL AG Ringstrasse 1 CH-5432 Neuenhof Phone +41 56 416 06 00 Fax +41 56 416 06 66 E-mail: rittal@rittal.ch www.rittal.ch RITTAL SA Avenue des Découvertes 18 1400 Yverdon-les-Bains Phone +41 24 424 11 77 Fax +41 24 424 11 78 E-mail: rittalyverdon@rittal.ch Syria Please contact RITTAL Middle East FZE Dubai/U.A.E. Taiwan RITTAL Systems Taiwan Ltd. 8F., No. 212 Ruiguang Road Neihu District, Taipei City 114 Taiwan Phone +886 2 2657 7689 Fax +886 2 2657 7158 E-mail: sales.info@rittal.com.tw www.rittal.com.tw Thailand RITTAL Ltd. No. 122/1 Krungthep-Kreetha Road Kwaeng Sapansoong Khet Sapansoong Bangkok 10250, Thailand Phone +66 2704 6580-88 Fax +66 2704 6589 E-mail: info@rittal.co.th www.rittal.com/th-en/ Turkey RITTAL Pano Sistemleri Tic. Ltd. Şti., Aydınlı Mah. İstanbul Anadolu Yakası Organize San. Bölgesi Mermerciler Cad. No:9 34953 Tuzla / İstanbul Phone +90 216 593 40 50 (pbx) Fax +90 216 593 40 60 E-mail: info@rittal.com.tr www.rittal.com.tr Ukraine RITTAL TOV 6V, Kievskaya Str., Vishnovoye 08132, Kiev region Phone +380 44 536 99 44 Fax +380 44 536 99 45 E-mail: office@rittal.com.ua www.rittal.com.ua USA RITTAL Corporation Woodfield Corporate Center 425 North Martingale Road, Suite 400 Schaumburg, Illinois 60173 USA Phone +1 937 399 0500 Fax +1 937 390 5599 E-mail: rittal@rittal.us www.rittal.us Venezuela EMI Equipos y Sistemas C. A. Edificio Centro Industrial Martinisi Local Piso 3 Calle 10 de la Urbanización La Urbina – Caracas Phone +58 212 243 6401 +58 212 243 5072 Fax +58 212 243 5114 E-mail: emi@emi-ve.com www.emi-ve.com Vietnam RITTAL Limited Liability Company (RITTAL LLC) Unit 401, 4th Floor, Alpha Tower # 151 Nguyen Dinh, Chieu Street District 03 Ho Chi Minh City, Vietnam Phone +84 8 39306135 Fax +84 8 39306134 www.rittal.com.vn Catalogue 2014 / 2015 ◾ Enclosures ◾ Power Distribution ◾ Climate Control ◾ IT Infrastructure 11.2013 / E938 ◾ Software & Services 34 Catalogue 2014 / 2015
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 746 Producer : iText 2.1.7 by 1T3XT Modify Date : 2014:07:10 08:07:31+02:00 Create Date : 2014:07:10 08:04:53+02:00EXIF Metadata provided by EXIF.tools