103922 Catalog
100175-Attachment 100175-Attachment 100175-Attachment 095691 Batch8 unilog cesco-content
106208-Catalog 106208-Catalog 106208-Catalog 095691 Batch8 unilog cesco-content
2014-07-05
: Pdf 103922-Catalog 103922-Catalog 095691 Batch5 unilog
Open the PDF directly: View PDF 
.
Page Count: 272 [warning: Documents this large are best viewed by clicking the View PDF Link!]
RIDGE TOOL COMPANY
0.1
Contents
About Ridge Tool – 0.3
Warranty – 0.5
Alphabetical Index – 14.1
Model Number Index – 14.4
Catalog Number Index – 14.8
Terms & Conditions – 14.16
New Products
238-P Powered Soil
Pipe Cutter
see page 3.5
SeeSnake®Mini
Self-Leveling
see page 11.6
Foam Core Cutters
see page 3.21
SeeSnake Compact2
Camera Reel
see page 11.9
600i/690i Power
Drive Threaders
see page 4.13-14
SeeSnake CS6
Digital Recording
Monitor
see page 11.18
RP200 Battery
Press Tool
see page 10.4
LM-400 Laser
Distance Meter
see page 11.25
RP340 Battery/
Corded Press Tool
see page 10.6
K-1 Combo Auger
see page
12.6
Standard Compact
Jaws for ASTM PEX
see page 10.7
Sewage Pump
System with
AdvanTEXT™
see page
12.48
Wrenches | 1.1 – 1.9
Pipe Vises & Supports | 2.1 – 2.5
Pipe/Tube Cutting & Preparation | 3.1 – 3.22
Threading | 4.1 – 4.31
Roll Grooving | 5.1 – 5.8
Cutting & Drilling | 6.1 – 6.9
General Purpose Hand Tools | 7.1 – 7.15
Bending & Forming | 8.1 – 8.8
Tube Repair & Joining | 9.1 – 9.5
Pressing | 10.1 – 10.13
Digital Inspection & Locating | 11.1 – 11.37
Drain Cleaning | 12.1 – 12.56
Wet/Dry Vacuums | 13.1 – 13.18
0.2
RIDGE TOOL COMPANY
3.2 3.5 3.10 3.14
7.2
5.3
1.2 1.2 1.5 1.61.4 1.7 1.9
2.2 2.3 2.4
6.2
4.3 4.134.8 4.20 4.23
5.8
7.6 7.9 7.10
8.5 8.5 8.6
11.9 11.34 11.36
12.9 12.36
9.2 9.5
8.2
12.26
4.24
10.11 10.13
7.12
13.1513.1413.1313.3 13.16
12.52
4.6 4.7
6.6 6.7 6.86.4
13.18
11.37
1.6 1.7
2.2
11.32
13.18
11.30
11.15 11.2411.20
10.4
11.19
3.21
2.2 2.4 2.4 2.5
3.8 3.15 3.15 3.19 3.20
4.16
5.4 5.5 5.7
6.5
7.4 7.5 7.8 7.15
8.3 8.4 8.7 8.8
9.3 9.4
10.6 10.7 10.8 10.9 10.12
11.6
12.6 12.8 12.14 12.38 12.4812.44
RIDGE TOOL COMPANY
0.3
Ridge Tool Company, a subsidiary of
Emerson, is part of Emerson Commercial
and Residential Solutions™. Emerson
(NYSE: EMR) has more than 60 divisions
that operate approximately 230
manufacturing locations worldwide with
over 132,000 employees and markets
products in over 150 countries.
Emerson Network Power™– reliable
power, precision environmental and
connectivity solutions for today’s
telecommunications and data network
infrastructure.
Emerson Process Management™– total
process industry intelligent field devices,
performance software and consulting
and engineering expertise.
Why do so many professionals choose RIDGID tools? The answer is
simple…trust. Millions of RIDGID tools go to work every day in plants, on
construction sites and in countless other harsh environments.
These tools operate in extremes of heat and cold, withstand dirt and mud,
and perform reliably day in and day out. RIDGID tools are known the world
over as industry-leading products that allow professionals like you to com-
plete jobs more quickly and reliably.
One of the design parameters for developing RIDGID tools is efficient
operation. We engineer ease-of-use into every product. And, we include
innovative features to ensure that our tools and machines get jobs done as
quickly as possible without compromising quality.
Developing and manufacturing innovative products to meet the ever-
changing demands of your job are a continuous process at Ridge Tool. Not
only do our evolving technologies help you solve today’s problems, they are
designed to address your future needs as well.
As a dependable partner for working professionals, we listen to your needs
and encourage your feedback. We then use that information to provide you
with the tools, equipment and support you’ve asked for.
The intuitive nature of our products helps you reduce your labor costs. For
example, our line of pipe and drain locating equipment is designed for high
performance, yet simple operation. With RIDGID, you spend less time
training your employees and more time driving your business.
Even though selling tools is our business, we help you rely on fewer tools
to get jobs done. Efficient operation means more jobs, higher revenues and
increased customer satisfaction. We are committed to introducing new
ways to help you grow your business and prosper.
We Build Reputations
Whether as a one person truck, or a member of a multi-
national crew, you have put immeasurable time and effort
in building a business of which to be proud. Though
individual heart is at the core, it is the customer’s
perception and visible results that enable success.
These are what define a reputation.
A positive reputation delivers the calls and the contracts.
It is a testament to hard work and business savvy. It builds
over time. However, it can break in no time. Call backs
and missed deadlines can be critical. This is why RIDGID®
promises to deliver:
• Condence that RIDGID products will consistently
perform in the harsh demands of the professional’s
work site.
• Efciency which results in faster work, more jobs
and improved profits.
• Industry Innovations to help our customers create
new services and income sources.
Maximizing uptime, through both tools and information, is
how RIDGID strives to give you a competitive advantage.
Whether a seasoned veteran or just starting out, RIDGID
tools and services help you build what matters most –
your good name.
As a group, we take pride in knowing our individual efforts
serve the greater good. From potable water to a reliable
infrastructure, it takes all of us working together to keep
this world in action. For ourselves, for our
businesses, and for the industry…
We Build Reputations
0.4
RIDGE TOOL COMPANY
Emerson Climate Technologies™– heating,
ventilating, air conditioning and refrigera-
tion technologies and systems for
residential, industrial and commercial
applications.
Emerson Commercial & Residential
Solutions™– a broad range of tools and
equipment for professional trades and do-
it-yourselfers throughout the world.
Emerson Industrial Automation™–
motion control systems and components;
plastics joining and precision cleaning
equipment and materials testing
equipment and supplies.
Our People Make
the Difference
The talented, committed employees of Ridge Tool share the common vision
of making our company the best. Together, we strive for the best in quality,
product innovations, technical support and customer service.
Throughout the world, our local teams of RIDGID customer service person-
nel provide the friendly, knowledgeable support that you need to keep
working. This support helps you select, obtain and use the proper tools to
get jobs done right.
Our training centers are available to help you get maximum productivity and
service life from our products. We offer you custom, hands-on training by
expert instructors.
In addition, our international network of RIDGID distribution centers ensures
that you get the products you want, when and where you want them. These
centers feature the latest in supply chain logistic technologies so that our
product stocking levels meet your delivery demands.
Global Support
Local teams of customer service personnel around the world provide the
support our end users and distributors need to keep them working. Friendly,
knowledgeable and courteous support help them select, obtain and use the
right tools to get the job done right as quickly as possible.
They also choose us for our international network of factory and
independently owned, authorized service centers. Local support helps our
customers get the maximum service life from their tools and equipment.
To learn more about Ridge Tool and its industry leading products visit
www.ridgid.com or contact one of the numbers below.
Inside the United States:
• Schedule a Product Demonstration: 1.800.769.7743
• Contact Customer Service: 1.888.743.4333
• Contact Technical Service: 1.800.519.3456
Outside the United States:
• Contact: +1.440.323.5581
Global Locations Manufacturing Warehousing Sales &
Support
United States
Elyria, Ohio •••
Cambridge, Ohio •••
Erie, Pennsylvania •••
Orange, Virginia ••
Europe
Cluj, Romania ••
Leuven, Belgium ••
Gevelsberg, Germany ••
Sissach, Switzerland •••
Australia
Campbellfield, Victoria ••
Asia
Kangawa Pref., Japan ••
Shanghai, China •••
South America
Guarulhos SP, Brazil ••
Latin America
Mexico City, Mexico ••
RIDGE TOOL COMPANY
0.5
Invest in RIDGID®Tools and
We Protect Your Investment
•1923 Ridge Tool
Company founded with the
introduction of the RIDGID
pipe wrench.
•1940 Ridge Tool
introduces power
threading machines.
•1943 Ridge Tool Company
establishes its headquarters
in Elyria, Ohio USA.
•1946 Ridge Tool begins
exporting products to help
rebuild Europe.
What Is Covered
RIDGID tools are warranted to be free of defects in workmanship
and material.
How Long Coverage Lasts
This warranty lasts for the lifetime of the RIDGID tool. Warranty coverage
ends when the product becomes unusable for reasons other than defects in
workmanship or material.
How You Can Get Service
To obtain the benefit of this warranty, deliver via prepaid transportation
the complete product to Ridge Tool Company, Elyria, Ohio, or any RIDGID
Independent Service Center. Pipe wrenches and other hand tools should be
returned to the place of purchase.
What We Will Do To Correct Problems
Warranted products will be repaired or replaced, at the option of Ridge
Tool, and returned at no charge; or, if after three attempts to repair or
replace during the warranty period the product is still defective, you can
elect to receive a full refund of your purchase price.
What Is Not Covered
Failures due to misuse, abuse or normal wear and tear are not covered
by this warranty. Ridge Tool shall not be responsible for any incidental or
consequential damages.
How Local Law Relates To The Warranty
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply
to you. This warranty gives you specific rights, and you may also have other
rights, which vary, from state to state, province to province, or country to
country.
No Other Express Warranty Applies
This Full Lifetime Warranty is the sole and exclusive warranty for RIDGID
products. No employee, agent, dealer, or other person is authorized to
alter this warranty or make any other warranty on behalf of the Ridge Tool
Company.
Executing the RIDGID Lifetime Warranty
Ridge Tool Company offers a comprehensive lifetime warranty to
support products purchased under the RIDGID Brand, excluding licensed
goods.
RIDGID branded products are built with reliability, dependability and
durability and are covered by a Full Lifetime Warranty against defects in
materials or workmanship.
In the event that you have a problem with your RIDGID product due to a
defect in materials or poor workmanship, we will attempt to remedy the
problem in accordance with our printed warranty policy in a timely manner.
For warranty information on RIDGID licensed goods, visit www.RIDGID.com.
Normal Wear and Tear
Commonly, our tools are used on job sites in the most demanding applica-
tions and environments. Under these conditions and over time, the RIDGID
product may experience normal wear and tear and require service. While
normal wear and tear is not considered a “defect” and is not covered by the
RIDGID Lifetime Warranty, it is our goal to get your tool back in service a
soon as possible. To help expedite this service, Ridge Tool offers a complete
assortment of service parts and a network of RIDGID Independent Service
Centers to meet your service needs. Technicians throughout our Service
Center Network are Factory Trained to provide quality repair service as well
as accurate determination and execution of RIDGID warranty if required.
For a complete list of RIDGID Independent Service Centers visit
www.RIDGID.com.
Defects in Materials and Workmanship
It is our experience that a product that fails prematurely due to a manufac-
turing defect in materials or workmanship, will generally do so very early
in the product’s life cycle, often the first or second time the product is used.
When returned for inspection, these products are generally found to be in
“like new” condition and show very little signs of use. It is uncommon for a
product that was manufactured with a defect, to survive under normal use
for any extended period of time. Products that are returned for warranty
inspection after months or years of continuous reliable service are rarely
found to be defective. The most common demand for service is the result
of normal wear and tear issues, which are not considered to be a defect in
materials or workmanship.
0.6
RIDGE TOOL COMPANY
•1964 A new sales and
manufacturing facility opens
in St. Truiden, Belgium.
•1966 Ridge Tool
becomes part of Emerson
Professional Tools™.
•1967 The Kollmann line
of drain cleaning and diag-
nostic tools becomes part of
Ridge Tool.
•1972 A new sales and
manufacturing facility opens
in Sao Paulo, Brazil.
Complete Product and
Service Support Online 24/7
Sometimes, a RIDGID®tool or a piece of equipment, will need to be repaired or serviced.
When that time comes, you have three options for getting your tools back to work fast and
performing like new:
The RIDGID Independent Service Center Network: For optimum service of your RIDGID
tools and equipment, there is no better choice than a RIDGID Service Center. To locate the
service center near you, go to RIDGID.com. Under the Support selection, choose Service
Centers and Repair.
We make repairs and service convenient.
Do-it-Yourself: Ridge Tool offers you 24/7 access to genuine RIDGID replacement parts at
www.ridgidparts.com.
RIDGID products are designed and built to the highest quality standards to perform specific
tasks with optimum and lasting efficiency. Tool components are made to complement each
other to form an ideally functioning “system”. To preserve the high standards of perfor-
mance you expect from RIDGID tools, it is important to make sure you use trademarked
RIDGID replacement parts.
Look for, and insist on, the “Genuine RIDGID Replacement Parts” label on all of the parts you
buy. It is your best assurance of performance, efficiency and long service life.
These are the values that built our reputation.
Use the RIDGID Factory Service Center: For Customers in the USA who need fast ser-
vice, contact the Ridge Tool Factory Service Center in advance when you are sending an item
in for repairs. Just complete our “Request Tool Repair” online form at https://www.ridgid.
com/us/en/tool-repair-form. Your completed email form alerts our service staff that your tool
is on its way. Then print out the form and include it with the tool being shipped to the Factory
Service Center.
Easy and smart.
Distributor 24x7 Service On Demand
RIDGID distributors have access to a comprehensive knowledgebase to get answers to a
wealth of product application and service questions – 24 hours a day, 7 days a week. Here
are just of the the many things you can do.
• Create a parts order with complete information with just a few taps of the keyboard.
• Use online warranty claims processing and assistance with executing the
RIDGID warranty.
• Create and store repair quotes.
• FAQs: Tips and Tricks, Service Notes and more are included to provide fast answers
to commonly asked questions.
At Ridge Tool, we make it easy.
RIDGE TOOL COMPANY
0.7
Quality Management
Systems
Ridge Tool manufacturing facilities listed below are certied to BS EN ISO 9001-
2000 Quality Management System Standards by an accredited Registrar.
Manufacturing Plant Accredited Registrar
Elyria, Ohio BSI
Erie, Pennsylvania BSI
Orange, Virginia BVQI
Distributor Support
Rely on your RIDGID®Distributor for our complete line of tools, parts, service and
information. Your RIDGID Distributor:
• Keeps you competitive with the latest products for your industry.
• Guarantees your purchasing power by buying from hundreds of suppliers.
• Helps you get back in business fast when you need parts or service.
• Manages trafc so you get the goods on time and at the least cost.
• Warehouses products for you, saving capital, insurance and overhead.
• Brings technical aid to your staff to solve your problems.
• Simplies your record-keeping with one billing for all your tool needs.
Parts and Repair
Parts Catalogs
Catalogs illustrating parts for hand tools, machines and drain cleaning products
are available upon request and cover all tools listed in this catalog. For ordering
the exact parts needed, be sure to order by the catalog numbers that appear in
the parts catalogs, as well as any other data that will help us avoid errors in
filling the order.
Estimates on repairs and prices on repair parts will be furnished upon receipt of
the tool or machine at our factory, or at a RIDGID Independent Authorized Service
Center. Return all tools and machines freight prepaid.
Please Note
Engineering advances may cause changes to information shown in this catalog.
Please contact your RIDGID distributor for current information.
Do not use RIDGID tools and equipment for any other purpose beyond those they
are intended for. Always follow any instructions and warnings provided with
RIDGID tools and equipment.
•2002 Ridge Tool
acquires Von Arx of
Sissach, Switzerland.
•1991 Ridge Tool establishes
European headquarters and
central distribution facility in
Leuven, Belgium.
•1996 Ridge Tool
acquires Peddinghaus of
Gevelsberg, Germany.
ISO 9001
FM 68317
Erie, Pennsylvania
ISO 9001
FM 65410
Elyria, Ohio
ISO 9001
Orange, Virginia / US 09000465
ISO 9001:2008
BUREAU VERITAS
Certification
0.8
RIDGE TOOL COMPANY
•TODAY Ridge Tool has manufacturing facilities in the USA, Europe and Asia • Ridge Tool products are available
in more than 150 countries around the world through a network of leading distributors • Ridge Tool offers more
than 300 types of tools and machines in over 4,000 models and sizes.
Ridge Tool U.S. Patents*
Registered Marks ®
4PIN
AUTOFEED
Chevron Design
CHEVRON Design
E3 (Stylized and/or with Design)
JOBMAX
KWIK-SPIN
MAXCORE
MICRO CG-100
MICRODRAIN
microEXPLORER
MS-UV & Design
NAVITRACK
NAVITRACK SCOUT
OIL LESS GOLD
PEX Design
POWER SPIN
POWERFUL. DURABLE. PROFESSIONAL.
PRESS SNAP
PRESSING TECHNOLOGY
QCS (QUICKCHANGE SYSTEM)
RAPIDGRIP
RAPRENCH
REPEAT-A-CUT
RIDG-BACK
RIDGE
RIDGE TOOL
RIDGID
RIDGID TOOL
RIDGID TOOLS
RIDGID (Stylized) (D & G Adjacent With Solid Bar)
RIDGID (Stylized) (D & G Adjacent)
RIDGID (Stylized) (D & G Adjacent) & Red Bar
RIDGID (Stylized) (D & G Interlocked)
RIDGID (Stylized) (D & G Interlocked) &
Wrench Design
RIDGID AIR MOVER (Stylized)
RIDGIDCONNECT
RIDGID KOLLMANN & Design
RIDGIDCONNECT
RIDGID CROSSCHEK
RIDGID QUICKCHANGE SYSTEM
RIDGID PEDDINGHAUS
RIDGID PRESSING TECHNOLOGY
RIDGIDSKETCH
RIKO
RITCO
ROOT RANGER
ROSCA CORTE
SCOUT
SEE IT. FIND IT. FIX IT.
SEE IT. FIND IT. SOLVE IT.
SOF-TOUCH
STRONGER. FASTER. LONGER LIFE.
THE RIDGE TOOL COMPANY
TRIBENDER
TRISTAND
U (Stylized)
UNIVERSAL GOLD
WARRANTY MEDALLION Design (Shaded)
WARRANTY MEDALLION Design (Unshaded)
WE BUILD REPUTATIONS
X-CEL
Ridge Tool U.S. Trademarks*
*Current at time of print.
K-60SP Drain Cleaner 5,657,505
K-40 Drain Cleaner 6,009,588; 6,243,905; 6,412,136
226 Soil Pipe Cutter 6,141,876
Power Spin 6,158,076
Roll Groover 6,272,895; 6,591,652
K-380 Drum Machine 6,360,397
117/118 Tubing Cutter 6,393,700; D485,150
One Stop Wrench 6,523,440; D462,245
915 Roll Groover 6,591,652
920 Roll Groover 6,688,150; 6,708,545
RapidGrip Pipe Wrench 6,742,419; 7,044,030; D474,380
418 Oiler 7,090,054; D498,487
Auto Spin 7,478,451; D509,929
425 Work Stand 7,537,186
Drain Cleaning 7,685,669; 8,046,862; 8,176,593,
8,413,347
Tube Cutter 7,716,840
Pipe Cutter 7,743,509
Inspection 7,889,980; D567,123; D573,042;
D578,906; D573,903; D668,566;
D668,567; D668,568
K-400 8,060,968
Press Snap 8,225,511
Faucet & Sink Installer
(Basin Nut Wrench)
D560,986
K-400 D579,612
Drain Cleaning D570,558; D582,108, D595,911
Pipe Cutter D626,812; D660,116
K-45 D629271
Pipe Vises 8,601,855; D657933; D645319; D645320;
D645321; D645322; D645323; D645324;
D645325; D645326; D645327
Locators 8,515,702; D699604
Pressing 5,611,228; 6,244,085; 6,434,998;
6,510,719; 6,510,723; 6,662,621;
6,694,586; 6,729,009; 7,000,448;
7,036,806; 7,124,608; 7,146,839;
7,155,955; 7,260,975; 7,421,871;
7,578,159; 7,634,859; 7,665,343;
7,979,980; 8,151,703; 8,276,429;
8,316,685; 8,418,520; 8,590,352;
8,613,642; D562,098; D593,828;
D598,259
WRENCHES
RIDGID®Pipe Wrenches are world-renowned for their unsurpassed toughness and serviceability. The original heavy-
duty pipe wrench, pictured below, has earned the condence of pipe professionals for over 80 years because it does
the job right the rst time, every time. RIDGID Pipe Wrenches are also available in a wide variety of purpose-built
congurations, and are available with cast aluminum handles that offer an average 40% weight reduction.
Replaceable, twice hardened
alloy steel jaws. Precision-milled,
biased tooth design maximizes
gripping strength and tool life.
I-Beam handle allows for maximum
strength and minimal weight.
Convenient hanging hole for easy storage.
Enlarged handle end helps prevent slippage.
Wide gripping surface for increased comfort.
Knurled adjustment nut for
easy one-handed operation.
Full floating forged hook jaw
for fast ratcheting action.
RIDGID Lifetime Warranty.
Anatomy of a Legend
Graduations on hook jaw show approximate
size of opening for different pipe sizes.
Large flange prevents nut from
being inadvertently rotated
when wrench is set down.
Extra large self-cleaning threads.
Proudly manufactured at RIDGID
headquarters in Elyria, Ohio, U.S.A.
1.1
WRENCHES
RIDGID®Wrenches
• Time-tested designs.
• Often imitated, never duplicated.
• Efcient designs to improve productivity.
• Innovative to provide new solutions to old problems.
______________________________________________________________________
Wrench Type No. of
Models
Nom.
Size (in.)
Capacity
(in.) Page
Heavy-Duty
Straight Pipe Wrenches
Straight Pipe 10 6-60 3⁄4- 8 1.2
Aluminum Straight 710-48 11⁄2- 6 1.2
RapidGrip®Wrenches
Heavy-Duty RapidGrip 2 10 - 14 11⁄2- 2 1.2
Aluminum RapidGrip 2 10 - 14 2 - 3 1.3
End Pipe Wrenches
End Pipe 8 6-36 3⁄4- 5 1.3
Aluminum End Pipe 410-24 11⁄2- 3 1.3
Raprench®1101
1⁄21.3
Offset Wrenches
Heavy-Duty Offset 314-24 2-3 1.4
Aluminum Offset 314-24 2-3 1.4
Hex Wrenches 39
1⁄2-20 5⁄8-25⁄81.4
Spud 112 3⁄8-2
5⁄81.5
Chain 5–2-4
1⁄21.5
Compound Leverage 4–2-8 1.5
Chain Tongs 6–
1⁄4- 18 1.6
Strap 8–2-5 1.6
Adjustable 8 6-24 3⁄4-2
7⁄16 1.6
Specific
Purpose Wrenches
Basin 310-17 3⁄8-2
1⁄21.7
Faucet & Sink Installer 110
1⁄4–1.8
Internal 14
1⁄21-2 1.8
One Stop 1––1.8
Wrench Parts –––1.9
WRENCHES
1.2
Heavy-Duty Straight Pipe Wrenches
Straight Pipe Wrenches
• Straight Pipe Wrenches have a sturdy, cast-iron housing and I-beam handle
with full oating forged hook jaw, featuring self cleaning threads with
replaceable hook and heel jaws.
• Heavy-duty pipe wrenches comply with federal specications GGG-W65IE,
Type II, Class A.
Catalog
No.
Model
No. Description Nom. Size Pipe
Capacity Weight Std.
Pack
in. mm in. mm lb. kg
31000 6 Heavy-Duty Straight Pipe Wrench 6150 3/420 1/20.2 6
31005 8 Heavy-Duty Straight Pipe Wrench 8 200 125 3/40.3 6
31010 10 Heavy-Duty Straight Pipe Wrench 10 250 11/240 13/40.8 6
31015 12 Heavy-Duty Straight Pipe Wrench 12 300 2502
3/41.2 6
31020 14 Heavy-Duty Straight Pipe Wrench 14 350 2 50 31/21.6 6
31025 18 Heavy-Duty Straight Pipe Wrench 18 450 21/265 53/42.6 6
31030 24 Heavy-Duty Straight Pipe Wrench 24 600 3 80 93/44.4 3
31035 36 Heavy-Duty Straight Pipe Wrench 36 900 5 125 19 8.7 1
31040 48 Heavy-Duty Straight Pipe Wrench 48 1,200 6150 341/415.6 1
31045 60 Heavy-Duty Straight Pipe Wrench 60 1,500 8 200 511/423.3 1
Nom. Size = nominal length of handle
Nom. Pipe Capacity = maximum nominal diameter of steel pipe
Aluminum Straight Pipe Wrenches
RIDGID®Aluminum Pipe Wrenches provide professional strength in lightweight
aluminum. The Aluminum Straight Pipe Wrench offers the same durability and
ease-of-use found in all RIDGID heavy-duty wrenches.
Catalog
No.
Model
No. Description Nom. Size Pipe Capacity Weight Std.
Pack
in. mm in. mm lb. kg
31090 810 Aluminum Straight Pipe Wrench 10 250 11/240 1 0.4 6
47057 812 Aluminum Straight Pipe Wrench 12 300 2502
1/21.1 6
31095 814 Aluminum Straight Pipe Wrench 14 350 2 50 21/21.1 6
31100 818 Aluminum Straight Pipe Wrench 18 450 21/265 33/41.7 6
31105 824 Aluminum Straight Pipe Wrench 24 600 3 80 62.7 3
31110 836 Aluminum Straight Pipe Wrench 36 900 5 125 11 5.0 1
31115 848 Aluminum Straight Pipe Wrench 48 1,200 6150 181/28.4 1
Nom. Size = nominal length of handle
Nom. Pipe Capacity = maximum nominal diameter of steel pipe
RapidGrip®Pipe Wrenches
RapidGrip®Wrenches
• Quick one-handed operation makes your jobs move faster.
• The spring-loaded jaw design provides rapid ratcheting action.
• Unique combination heel/hook jaw design aggressively bites the work piece
and insures a secure grip.
Catalog
No.
Model
No. Description Nom. Size Pipe
Capacity
Fittings
Capacity Weight Std.
Pack
in. mm in. mm in. mm lb. kg
10348 10 RapidGrip Wrench 10 250 11/240.0 125.0 1.6 0.7 12
10358 14 RapidGrip Wrench 14 350 2 50.0 11/240.0 3.1 1.4 10
Nom. Size = nominal length of handle
Nom. Pipe Capacity = maximum nominal diameter of steel pipe
Fittings Capacity = maximum nominal diameter of fitting
1.3
WRENCHES
RapidGrip®Pipe Wrenches
Aluminum RapidGrip®Wrenches
• All the great benets of the heavy-duty RapidGrip wrench. 35% lighter than
heavy-duty models.
• Quick one-handed operation makes your jobs move faster.
• The spring-loaded jaw design provides rapid ratcheting action.
• Unique combination heel/hook jaw design aggressively bites the work piece
and insures a secure grip.
Catalog
No.
Model
No. Description Nom. Size Pipe
Capacity
Fittings
Capacity Weight Std.
Pack
in. mm in. mm in. mm lb. kg
12693 14 Aluminum RapidGrip Wrench 14 350 2 50 11/240 2.1 0.9 10
12698 18 Aluminum RapidGrip Wrench 18 450 380 21/265 4.3 1.9 1
Nom. Size = nominal length of handle
Nom. Pipe Capacity = maximum nominal diameter of steel pipe
Fittings capacity = maximum nominal diameter of fitting
End Pipe Wrenches
End Pipe Wrenches
An ideal wrench for pipe work close to a wall, in tight quarters or in closely-
spaced parallel lines.
Catalog
No.
Model
No. Description Nom. Size Pipe Capacity Weight Std.
Pack
in. mm in. mm lb. kg
31050 E-6 End Pipe Wrench 6150 3/420 1/20.2 6
31055 E-8 End Pipe Wrench 8 200 125 3/40.3 6
31060 E-10 End Pipe Wrench 10 250 11/240 13/40.8 6
31065 E-12 End Pipe Wrench 12 300 2502
3/41.2 6
31070 E-14 End Pipe Wrench 14 350 2 50 31/21.6 6
31075 E-18 End Pipe Wrench 18 450 21/265 53/42.6 6
31080 E-24 End Pipe Wrench 24 600 3 80 93/44.4 6
31085 E-36 End Pipe Wrench 36 900 5 125 19 8.7 1
Nom. Size = nominal length of handle
Nom. Pipe Capacity = maximum nominal diameter of steel pipe
Aluminum End Wrenches
The Aluminum End Wrench is ideal for jobs in tight spaces and over-head
applications. Designed for easy access in close parallel lines. 40% lighter than
heavy-duty wrenches.
Catalog
No.
Model
No. Description Nom. Size Pipe Capacity Weight Std.
Pack
in. mm in. mm lb. kg
90107 E-910 Aluminum End Wrench 10 250 11/240 1 0.4 6
90117 E-914 Aluminum End Wrench 14 350 2 50 2 0.9 6
90122 E-918 Aluminum End Wrench 18 450 21/265 31.4 6
90127 E-924 Aluminum End Wrench 24 600 3 80 5 2.2 6
Nom. Size = nominal length of handle
Nom. Pipe Capacity = maximum nominal diameter of steel pipe
WRENCHES
1.4
Raprench®Wrenches
Raprench®Wrenches
A deeper and broader hook jaw housing provides a smooth, at surface that is
ideal for occasional use as a hammer.
Catalog
No.
Model
No. Description Nom. Size Pipe Capacity Weight Std.
Pack
in. mm in. mm lb. kg
31395 10 Raprench Wrench 10 250 11/240 2 0.9 6
Nom. Size = nominal length of handle
Nom. Pipe Capacity = maximum nominal diameter of steel pipe
Heavy-Duty Offset Pipe Wrenches
The Heavy Duty Offset Pipe Wrench features a jaw opening parallel to the
handle and a narrower hook jaw head. Provides easy entry into tight spots.
Catalog
No.
Model
No. Description Nom. Size Pipe Capacity Weight Std.
Pack
in. mm in. mm lb. kg
89435 14 Offset Pipe Wrench 14 350 2 50 21/41.0 6
89440 18 Offset Pipe Wrench 18 450 21/265 53/42.6 6
89445 24 Offset Pipe Wrench 24 600 3 80 93/44.4 6
Nom. Size = nominal length of handle
Nom. Pipe Capacity = maximum nominal diameter of steel pipe
Catalog
No.
Model
No. Description Nom. Size Pipe Capacity Weight Std.
Pack
in. mm in. mm lb. kg
31120 14 Aluminum Offset Pipe Wrench 14 350 2 50 2 0.9 6
31125 18 Aluminum Offset Pipe Wrench 18 450 21/265 31/21.6 6
31130 24 Aluminum Offset Pipe Wrench 24 600 3 80 62.7 6
Nom. Size = nominal length of handle
Nom. Pipe Capacity = maximum nominal diameter of steel pipe
Hex Wrenches
• Hex jaw design gives multi-sided, secure grip on all hex nuts, square nuts,
unions and valve packing nuts.
• The extra-wide opening offset model is ideal for securing drain nuts on
sinks and tubs.
• Thin, smooth jaws slip into the tightest places.
Catalog
No.
Model
No. Description Nom. Size Pipe Capacity Weight Std.
Pack
in. mm in. mm lb. kg
31305 E-110 Offset Hex 91/2240 11/8-2
5/829-67 11/20.6 6
31275 17 Straight Hex 141/2362 5/8-1
1/416-30 41/22.0 6
31280 25 Straight Hex 20 500 1 - 2 25 - 50 83/44.0 6
Aluminum Offset Pipe Wrenches
• Aluminum Offset Pipe Wrenches feature a jaw opening parallel to the
handle and a narrower hook jaw head. This lightweight wrench provides
easy entry into tight spots.
• Ideal for overhead applications.
Offset Wrenches
Hex Wrenches
1.5
WRENCHES
Spud Wrenches
Spud Wrenches
• 12" Spud Wrench features narrow jaws to t into tight places.
• Smooth, toothless jaws ideal for square or rectangular stock.
Catalog
No. Description Nom. Size Pipe Capacity Weight Std.
Pack
in. mm in. mm lb. kg
31400 Spud Wrench 12 300 3/8-2
5/810-67 2
1/21.1 6
Chain Wrenches
• A double jaw gives fast, ratchet- like action in either direction.
• The heavy-duty model has replaceable alloy steel jaws.
• The light-duty model has a one- piece forged alloy steel handle and jaw.
Ideal for use in close quarters.
Catalog
No.
Model
No. Description
Rated Pipe
Capacity
Actual O.D.
Capacity
Chain
Length Weight Std.
Pack
in. mm in. mm in. mm lb. kg
31310 C-12 Light-Duty Chain Wrench 2 50 4 100 153/4390 13/40.8 1
31315 C-14 Heavy-Duty Chain Wrench 2 50 5 125 181/2460 23/41.2 1
31320 C-18 Heavy-Duty Chain Wrench 21/260 5 125 201/4500 62.7 1
31325 C-24 Heavy-Duty Chain Wrench 375 5 125 201/4500 81/43.7 1
31330 C-36 Heavy-Duty Chain Wrench 41/2110 71/2185 29 725 153/47.1 1
Rated pipe capacity = nominal diameter that can be correctly tightened
Actual O.D. capacity = actual O.D. that chain can accommodate
Compound Leverage Wrenches
The compound leverage wrench offers a unique design that multiplies the
turning force applied to a pipe. Ideal for freeing locked couplings and joints
frozen by age or damage. Replaceable jaws are hardened alloy steel.
Catalog
No.
Model
No. Description
Pipe
Capacity Weight Std.
Pack
in. mm lb. kg
31375 S-2 Compound Leverage Wrench 25071/43.3 1
31380 S-4A Compound Leverage Wrench 5 125 331/215.2 1
31385 S-6A Compound Leverage Wrench 6150 451/220.6 1
31390 S-8A Compound Leverage Wrench 8 200 681/231.1 1
Nom. Size = nominal length of handle
Nom. Pipe Capacity = maximum nominal diameter of steel pipe
Chain Wrenches
Compound Leverage Wrenches
WRENCHES
1.6
Catalog
No.
Model
No. Description
Total
Length Pipe Capacity Chain
Length
Chain
Breaking
Load
Weight Std.
Pack
in. mm in. mm in. mm lb. kg lb. kg
92660 3215 Single-End Chain Tongs 87 2,209 4 - 18 114 - 457 741/21,892 56,000 25,401 156 71 1
92665 3229 Double-End Chain Tongs 27 686 1/4-2
1/213-73 17
1/2445 13,800 6,260 11 5 1
92670 3231 Double-End Chain Tongs 37 939 3/4- 4 26 - 114 221/2572 17,600 7,983 21 10 1
92675 3233 Double-End Chain Tongs 44 1,117 1 - 6 33 - 168 32 813 20,100 9,117 29 13 1
92680 3235 Double-End Chain Tongs 50 1,270 11/2- 8 48 - 219 401/21,29 22,000 9,979 39 18 1
92685 3237 Double-End Chain Tongs 64 1,625 2 - 12 60 - 323 551/21,410 31,000 14,061 67 30 1
Chain Tongs
•Designed and sized to provide extra leverage for the toughest jobs.
•All models feature double-end jaw styles which can be reversed, except
Model 3215, which is a single-end tong.
Replacement Straps
Catalog
No.
Strap
Length Strap Width
in. mm in. mm
31990 17 425 1/212
32015 17 425 11/830
32020 24 600 11/830
32025 30 760 11/830
32050 291/4750 13/445
32055 48 1,200 13/445
32035 17 425 11/16 27
32065 30 760 13/445
Strap Wrenches
Catalog
No.
Model
No. Description
Handle
Length
Strap
Length
Strap
Width
Pipe
Capacity
O.D. Tube
Capacity Weight Std.
Pack
in. mm in. mm in. mm in. mm in. mm lb. kg
31335 1 Strap Wrench 113/4300 17 425 1/212 2 50 - - 11/40.5 1
31340 2 Strap Wrench 113/4300 17 425 11/830 2 50 - - 13/40.8 1
31345 2 Strap Wrench 113/4300 30 760 11/830 2 50 - - 13/40.8 1
31350 2 Strap Wrench 113/4300 24 600 11/830 2 50 - - 13/40.8 1
31355 2P* Strap Wrench 113/4300 17 425 11/16 27 2 50 - - 13/40.8 1
31360 5 Strap Wrench 18 450 291/4750 13/445 5 125 - - 2 0.9 1
31365 5 Strap Wrench 18 450 48 1,200 13/445 5 125 - - 2 0.9 1
31370 5P* Strap Wrench 18 450 291/4750 13/445 5 125 - - 21/81.0 1
*Strap designed for use with plastic pipe.
Strap Wrenches
•Strap Wrenches are best for any
polished pipe.
•Strong, woven nylon strap gives tight
grip.
•Two models available for plastic pipe.
•Polyurethane-coated strap.
Adjustable Wrenches
•High grade chrome-vanadium alloy steel.
•Forged and heat-treated for durability.
•Cobalt-plated finish to reduce rust and corrosion.
•Jaw scales in SAE and metric for quick adjustment.
Adjustable Wrenches
Catalog
No.
Model
No. Description Nom. Size Jaw Opening Weight Std.
Pack
in. mm in. mm lb. kg
86902 756 6" Adjustable Wrench 6 150 3/420 1/40.1 2
86907 758 8" Adjustable Wrench 8 200 7/825 1/20.2 2
86912 760 10" Adjustable Wrench 10 250 11/830 3/40.3 2
86917 762 12" Adjustable 12 300 15/16 35 11/20.6 2
86922 765 15" Adjustable 15 375 111/16 40 3 1.3 2
86927 768 18" Adjustable 18 450 21/850 51/82.3 2
86932 774 24" Adjustable 24 600 27/16 60 91/44.2 1
Chain Tongs
1.7
WRENCHES
Specific Purpose Wrenches
Basin Wrenches
• The RIDGID®Basin Wrench is an ideal tool for use in tight spaces and
under sink applications.
• Spring-loaded jaws of forged alloy steel provide fast, one-hand ratcheting.
• Tension plug holds head in any position up to 90° angle.
• Telescopic shanks on Models 1017 and 1019 quickly adjust for lengths
from 10" to 17".
Catalog
No.
Model
No. Description Nominal Size Pipe Capacity Weight Std.
Pack
in. mm in. mm lb. kg
31175 1017 Telescoping Basin 10 - 17 240 - 425 3/8-1
1/410 - 32 2 0.9 1
31180 1019 Telescoping Basin 10 - 17 240 - 425 11/4-2
1/232 - 65 2 0.9 1
Catalog No. Model No. Description Nom. Size Weight Std.
Pack
in. mm lb. kg
66807 2006 Faucet & Sink Installer 101/4260.35 0.77 0.35 6
Faucet & Sink Installer
The RIDGID Faucet and Sink Installer is a multipurpose under-sink plumbing
tool. This tool is used to fasten and remove plastic basin nuts, supply line
nuts, along with 7/8" and 1" hex nuts. The tool also features an aluminum
insert for turning angle stop handles, and another aluminum insert for holding
strainer baskets in place. Its extra long construction makes it ideal for hard to
reach applications. The RIDGID Faucet & Sink Installer is a great addition to
any toolbox.
Extra long to turn hard to reach mounting nuts on faucets, sprayers and ball
cocks.
• Notched ends engage 2, 3, 4, and 6 tab basin nuts.
• Open slot allows easy access over existing supply lines.
• Shut off valve attachment turns hard to reach angle stops without marring
chrome.
• Strainer basket attachment holds drain unit in place while tightening
strainer nut.
•7/8" & 1" metal or plastic hex nuts.
• Light weight, high strength plastic construction with durable aluminum
inserts.
WRENCHES
1.8
Specific Purpose Wrenches
Internal Wrenches
• Holds closet spuds and bath, basin and sink strainers through 2". Use to
install or extract Schedule 40 1" through 2" nipples.
• Jaws expand by eccentric action and are reversible for various sizes.
Catalog
No.
Model
No. Description Nom. Size Pipe Capacity Weight Std.
Pack
in. mm in. mm lb. kg
31405 342 Internal 41/2113 1-2 25-50 15/80.7 1
One Stop Wrenches
• The One Stop Wrench is two wrenches in one.
• It provides the exact size wrench you need to install angle stops and
compression couplings.
Catalog
No.
Model
No. Description Nom. Size Weight Std. Pack
in. mm lb. kg
27023 2002 One Stop - - 0.73 0.3 1
1.9
WRENCHES
Wrench Parts:
Always Insist On Genuine RIDGID®Parts
Wrench
Size
Pipe
Cap.
Handle Assembly Nut Pin
Heel Jaw
& Pin
Assembly
Coil & Flat
Spring
Assembly
Hook
Jaw
Str. End
Straight
Iron
Straight
Aluminum
End
Iron
End
Aluminum
Catalog
No.
Catalog
No.
Catalog
No.
Catalog
No.
Catalog
No.
Catalog
No.
Catalog
No.
Catalog
No.
Catalog
No.
6E-6 3⁄431420 – 31470 – 31570 31575 31560 31565 31555
8 E-8 131425 –31475 –31595 31600 31585 31590 31580
10 E-10 11⁄231430 31510 31480 93907 31615 31625** 31610 31620 31605
12 E-12 2 31435 49972 31485 –31645 31650 31635 31640 31630
14 E-14 2 31440 31515 31490 93912 31665 31650** 31635 31660 31655
18 E-18 21⁄231445 31520 31495 93917 31685 31690 31675 31680 31670
24 E-24 331450 31525 31500 93922 31710 31715 31700 31705 31695
36 E-36 5 31455 31530 31505 –31735 31740 31725 31730 31720
48 – 6 31460 31535 – – 31760 31765 31750 31755 31745
60 – 8 31465 –––31785 31790 31775* 31780 31770
10 Raprench 11⁄232775 –––31615 31625 31610 31620 31605
* Use with 60” Hook Jaw catalog number 31770.
** Pin for 10’’ Aluminum End Handle Assembly is catalog no. 95402. Pin for 14’’ Aluminum End Handle Assembly is catalog no. 95407.
For additional wrench parts, see RIDGID Hand Tool Parts Catalog.
RIDGE TOOL COMPANY
2.1
PIPE VISES & SUPPORTS
Pipe Vises & Supports
• Wide selection of pipe accessories designed to work as one.
• Rugged construction for years of dependable service.
______________________________________________________________________
Pipe Vises &
Supports
No. of
Models
Pipe
Capacity (in.)
Height
Adj.
(in.)
Page
Vises
Portable TRISTAND®41⁄8-12 –2.2
Stand Chain 11⁄8-5 –2.2
Bench Chain 91⁄8-5 –2.2
Bench Yoke 41⁄8-6 –2.3
Portable Chain & Yoke 2 1⁄8-5 –2.3
Pipe Welding 41⁄2-8 –2.3
Pipe Stands
V-Head 3 12 20 - 51 2.4
Roller Head 2 12 24 - 55 2.4
Conveyor Head 112 30 - 46 2.4
Ball Transfer 112 –2.4
Adjustable 3 12 23 - 42 2.5
Adjustable Roller Stand 136 –2.5
Large Diameter Stand 124 16 -31 2.5
PIPE VISES & SUPPORTS
2.2
Pipe Vises Portable TRISTAND®Vises
Each TRISTAND pipe vise features integral folding legs for easy transport and setup, tool
hangers and a base which overhangs the front legs for clear tool swing.
• Model 425 features “quick grab", self-locking latch and carrying handle for ease of
transport.
• Model 40-A integrates a yoke style vise into the base and a rugged tool tray.
• Model 460-6 - optimized base layout to maximize working area, convenient lug to clamp
the weld ground, rugged leg chain for the tough demands and a durable tool tray.
• Model 460-12 - all the features of the 460-6 but a capacity of 12" and an adjustable rear
leg.
Catalog
No. Model No. Description
Pipe
Capacity Weight Std.
Pack
in. mm lb. kg
40130 40-A Portable TRISTAND®Yoke Vise 1/8-2
1/23-60 481/222.0 1
16703 425 Portable TRISTAND®Chain Vise 1/8-2
1/23-60 32 14.5 1
36273 460-6 Portable TRISTAND®Chain Vise 1/8-6 3 - 150 423/419.4 1
36278 460-12 Portable TRISTAND®Chain Vise* 1/8-12 3 - 300 603/427.6 1
*Jaw for Plastic Pipe, Catalog No. 41280 available; order separately
Stand Chain Vise
• Handy, portable stand chain vise.
• Sturdy cast-iron frame.
• Equipped with pipe rest, pipe bender, and tool tray. 11/4" pipe for legs and connecting pipe
not furnished.
Catalog
No.
Model
No. Description
Pipe Capacity Weight Std.
Pack
in. mm lb. kg
40165 560 Top Screw Stand Chain Vise 1/8- 5 3 - 125 253/411.7 1
Bench Chain Vises
• Crank handle is anchored to base.
• Rugged cast-iron base has handy pipe rest and bender. Capacities of 1/8" through 8".
• Two models available for plastic pipe. Toothless jaws are neoprene-coated to prevent
scoring of pipe.
Catalog
No.
Model
No. Description Pipe Capacity Weight Std.
Pack
in. mm lb. kg
40185 BC210 Top Screw Bench Chain Vise 1/8-2
1/23-60 7
3/43.5 1
40195 BC410 Top Screw Bench Chain Vise 1/8-4 3-100 143/46.7 1
40190 BC210P Top Screw Bench Chain Vise* 1/2-2
7/815-70 7
3/43.5 1
40200 BC410P Top Screw Bench Chain Vise* 1/2-4
1/215 - 110 15 6.8 1
40205 BC510 Top Screw Bench Chain Vise 1/8-5 6-125 143/46.7 1
40210 BC610 Top Screw Bench Chain Vise 1/4- 6 8 - 150 241/211.1 1
40215 BC810 Top Screw Bench Chain Vise 1/2- 8 15 - 200 371/416.9 1
40175 BC2A Bottom Screw Bench Chain Vise 1/8-2 6-50 6 2.7 1
40180 BC4A Bottom Screw Bench Chain Vise 1/8- 4 6 - 100 131/46.0 1
*For Plastic Pipe and Tube
425 Portable
TRISTAND®Chain Vise
40-A Portable
TRISTAND®Yoke Vise
460-6 Portable
TRISTAND®Chain Vise
460-12 Portable
TRISTAND®Chain Vise
Top Screw Stand
Chain Vise
Top Screw Bench
Chain Vise
2.3
PIPE VISES & SUPPORTS
Bench Yoke Vises
• Yoke and base made of strong, dependable iron. Hardened alloy steel jaws and
convenient pipe rest and bender included.
Catalog
No.
Model
No. Description Pipe Capacity Weight Std.
Pack
in. mm lb. kg
40080 21 Bench Yoke Vise 1/8-2 3-50 83/44.0 1
40090 23 Bench Yoke Vise 1/8-3 3-80 193/49.0 1
40100 25 Bench Yoke Vise 1/8-4 3 - 100 273/412.6 1
40110 27 Bench Yoke Vise 1/8-6 3 - 150 65 29.6 1
Portable Chain and Yoke Vises
• Light, strong, portable post chain vise ts any shape or kind of post.
• Model 640 features a tray for oil can, plus a handy pipe bender.
• Portable yoke vise easily attaches to plank, workbench or post.
Catalog
No.
Model
No. Description Pipe Capacity Weight Std.
Pack
in. mm lb. kg
40125 39 Portable Kit Yoke Vise 1/8-2
1/23-60 151/27.0 1
40170 640 Top Screw Post Chain Vise 1/8-5 3 - 124 231/210.7 1
Pipe Welding Vises
• Made of durable performance-proven material and designed to resist strain, heat and warpage during tacking.
• Machined swivel nuts and pins, together with special chain screws, give smooth and trouble-free assembling of the vise onto pipe.
Catalog
No.
Model
No. Description Pipe Capacity Weight Std.
Pack
in. mm lb. kg
40220 461 Straight Pipe Welding Vise 1/2- 8 15 - 200 151/27.0 1
40225 462 Angle Pipe Welding Vise 1/2-12 15-300 183/88.4 1
40230 463 Elbow Pipe Welding Vise 21/2-8 65-200 14 6.4 1
40235 464 Flange Pipe Welding Vise 21/2- 8 65 - 200 171/47.8 1
Elbow Pipe Welding Vise Flange Pipe Welding Vise
Straight Pipe Welding Vise
Angle Pipe Welding Vise
Bench Yoke Vise
Portable Yoke Vise
Top Screw
Post Chain Vise
PIPE VISES & SUPPORTS
2.4
Pipe Stands
V Head Pipe Stands
• Locking ring allows for quick vertical height adjustments.
• The legs fold on the new VF-99 Folding Pipe Stand (Cat No 22168) making it easy to transport and
requiring 70% less area to store!
Catalog
No.
Model
No. Description
Height
Adjustment
Low-High
Max. Pipe
Capacity
Max.
Weight
Capacity
Weight
in. cm in. mm lb. kg lb. kg
56657 VJ-98 V Head Low Pipe Stand 20 - 38 51 - 96 12 300 2,500 1,134 21 9.5
56662 VJ-99 V Head High Pipe Stand 28 - 53 7 - 3 12 300 2,500 1,134 23 10.4
22168 VF-99 V Head High Folding Pipe Stand 28 - 51 71 - 132 12 300 2,500 1,134 24 10.9
VF99 V Head Pipe Stand
VJ99 V Head Pipe Stand
Roller Head Pipe Stands
• Rollers center pipe and allow rotation.
• Locking ring allows for quick vertical height adjustments.
• Ideal for use with threading machines, roll grooving, or other pipe working applications.
Catalog
No.
Model
No. Description
Height
Adjustment
Low-High
Max. Pipe
Capacity
Max. Weight
Capacity Weight
in. cm in. mm lb. kg lb. kg
56667 RJ-98 Roller Head Low Pipe Stand 24 - 42 61 - 107 12 300 1,000 454 24 10.9
56672 RJ-99 Roller Head High Pipe Stand 32 - 55 81 - 142 12 300 1,000 454 27 12.3
Conveyor Head Pipe Stands
• Conveyor head allows the pipe to move back and forth for moving material on the jobsite or loading
into a threading machine.
• Locking ring allows for quick vertical height adjustments.
• Ideal for use with threading machines, roll grooving, or other pipe working applications.
Catalog
No.
Model
No. Description
Height
Adjustment
Low-High
Max. Pipe
Capacity
Max. Weight
Capacity Weight
in. cm in. mm lb. kg lb. kg
56682 CJ-99 Conveyor Head High Stand 30 - 46 76 - 117 12 300 1,000 454 19 8.6
CJ99 Conveyor Head Pipe Stand
Ball Transfer Head
• Ball head allows pipe to slide and rotate easily.
• Fits easily onto V Head Pipe Stands (VJ-98, VJ-99, VF-99).
• Ideal for use with threading machines, roll grooving, or other pipe working applications.
Catalog
No.
Model
No. Description
Max. Pipe
Capacity
Max. Weight
Capacity Weight
in. mm lb. kg lb. kg
37997 BTH-9 Ball Transfer Head for VJ Stand* 12 300 1,000 454 5 2.3
*Pipe Stand Sold Separately
Ball Transfer Head
RJ-99 Roller Head High Pipe Stand
2.5
PIPE VISES & SUPPORTS
Adjustable Pipe Supports
Ideal for use with threading machines, roll grooving, or other pipe working applications.
Catalog
No.
Model
No. Description
Height
Adjustment
Low-High
Max. Pipe
Capacity
Max. Weight
Capacity Weight
in. cm in. mm lb. kg lb. kg
42505 46 Adjustable Pipe Support 23 - 33 58 - 84 6 150 2,500 1,134 23 10.4
42510 92 Adjustable Pipe Support 32 - 41 81 - 104 6 150 2,500 1,134 28 12.7
83380 965 Support Stand for Groovers 26 - 42 66 - 107 12 300 2,500 1,134 29 13.2
Adjustable Stand with Steel Rollers
• Feedscrew quickly adjusts sizes and keeps pipe centered on stand.
• Rollers can be locked to prohibit rotation.
• Ideal for use with threading machines, roll grooving, or other pipe working applications.
Catalog
No.
Model
No. Description Height Max. Pipe
Capacity
Max. Weight
Capacity Weight
in. cm in. mm lb. kg lb. kg
64642 AR99 Ad. Roller Stand w/Steel Wheels 34 86 36 900 2,500 1,134 30 13.6
AR99 Adjustable Stand
with Steel Rollers
Large Diameter Pipe Stand
• Holds 6"-24" (15-61 cm) diameter pipe and up to 4,500 lbs (2,041 kg).
• Heavy duty rollers allow the pipe to turn freely for welding and roll grooving applications.
• Height adjustable.
Catalog
No.
Model
No. Description
Height
Adjustment
Low-High
Max. Pipe
Capacity
Max. Weight
Capacity Weight
in. cm in. mm lb. kg lb. kg
96372 RJ624 Large Diameter Pipe Stand 16 - 31 41 - 79 24 610 4,500 2,041 167 75.7
RJ624 Large Diameter Pipe Stand
46 Adjustable
Pipe Support
92 Adjustable
Pipe Support
965 Support Stand
for Groovers
RIDGE TOOL COMPANY
3.1
PIPE/TUBE CUTTING & PREPARATION
Pipe/Tube Cutting & Preparation
• Wide selection from a single source.
• Durable designs.
• Exclusive features for maximum productivity.
______________________________________________________________________
Type No. of Models Pipe Capacity (in) Page
Pipe Cutters
Heavy-Duty 71⁄8- 6 3.2
4-Wheel 2 3⁄4- 4 3.3
Wide Roll 11⁄8- 2 3.3
Hinged 11 2-12 3.3
Soil Pipe 51
1⁄2-8 3.4-3.6
Torque Wrench 2 –3.6
Replacement Cutter Wheels 21 –3.7
Pipe Reamers / Extractors / Taps
Reamers 41⁄4-4 3.8
Extractors 15 1⁄8-2 3.8
Extractor Sets 41⁄8-1 3.8
Pipe Taps 91⁄8-2 3.8
Power Pipe Cutting 22
1⁄2-12 3.9-3.10
Dry Cut Saws 312-14 3.11
Copper Cutting & Prep 21⁄2-4 3.13.13
Tubing Cutters 24 1⁄8-6
5⁄83.14-3.17
Replacement Cutting
Wheels 19 – 3.18
Plastic Pipe Cutters 61⁄8-2
3⁄83.19-3.21
Copper Cleaning Brush/
Machine Accessories ––3.21
Conduit Sizing Tool 11⁄2-3⁄43.21
Reamers, Deburring Tools 61⁄4-4 3.22
PIPE/TUBE CUTTING & PREPARATION
3.2
Heavy-Duty Pipe Cutters
• Fast, clean pipe cutting.
• Extra-long shank protects adjustment threads, while an extra-large
handle is provided for quick, easy adjustment.
• Can be converted to 3-wheel cutter by replacing rollers with cutter
wheel. The 2A and 4S models can be ordered as a 3-wheel model for use
in areas where a complete turn is not possible.
• Second handle on 3-S, 4-S and 6-S models makes two-man leverage
possible on large pipe sizes.
Catalog
No.
Model
No. Description
Pipe Capacity
Nominal Size Weight
in. mm lb. kg
32820 2-A Heavy-Duty 1/8-2 3-50 73.2
32825 2-A 2-A 3-Wheel Heavy-Duty 1/8-2 3-50 73.2
32830 3-S Heavy-Duty 1 - 3 25 - 80 15 6.9
32840 4-S Heavy-Duty 2 - 4 50 - 100 18 8.2
32845 4-S 4-S 3-Wheel Heavy-Duty 2 - 4 50 - 100 18 8.2
32850 6-S Heavy-Duty 4 - 6 100 - 150 22 10.0
Nos.3-S, 4-S & 6-S
Nos.1-A & 2-A
See page 3.7 for pipe cutter
replacement cutter wheels.
Heavy-Duty Pipe Cutters
Material / Diameter Pipe Cutter Page No.
Steel / Stainless Heavy Wall Steel Cast Iron
1⁄8"-6"Heavy-Duty 3.2 - 3.3
3⁄4"-4"4-Wheel 3.3
1⁄8"-2"Wide-Roller 3.3
2"-12"Hinged 3.4-3.6
11⁄2"-8"Soil Pipe 3.4 - 3.5
Pipe Cutter Selection
3.3
PIPE/TUBE CUTTING & PREPARATION
4-Wheel Pipe Cutters
Wide-Roll Pipe Cutter
• Featuring extra-wide rolls, this cutter is especially designed for use with
power drives.
• The wide rolls provide for true tracking and cleaner cuts.
Catalog
No.
Model
No. Description
Pipe Capacity
Nominal Size Weight
in. mm lb. kg
32895 202 Heavy-Duty Wide Rolls 1/8-2 3-50 83.5
Hinged Pipe Cutters
• Designed for rapid cutting of 2 (50 mm) to 12" (300 mm) steel pipe,
heavy-wall steel pipe and cast-iron pipe.
• The 11 models operate with minimal cutter rotation as necessary for
tight quarters.
• Second handle included for 466, 472 and 468 makes two-man leverage
possible for large pipe sizes.
Catalog
No.
Model
No. Description
Pipe Capacity
Nominal Size Weight
in. mm lb. kg
73162 424-S* For Steel Pipe 2 - 4 50 - 100 131/26.0
74227 424-CI For Cast/Ductile Iron 2 - 4 50 - 100 131/26.0
90995 466-D For SML Pipe 3 - 6 80 - 150 29 13.0
83080 466-S* For Steel Pipe 4 - 6 100 - 150 281/213.0
83085 466-HWS* For Heavy-Wall Steel Pipe 4 - 6 100 - 150 281/213.0
74685 466-CI For Cast-Iron Pipe 4 - 6 100 - 150 281/213.0
83145 468-S* For Steel Pipe 6 - 8 150 - 200 33 15.0
83150 468-HWS* For Heavy-Wall Steel Pipe 6 - 8 150 - 200 331/215.2
74700 468-CI For Cast-Iron Pipe 6 - 8 150 - 200 331/215.2
83165 472-S* For Steel Pipe 8 - 12 200 - 300 411/219.0
83170 472-HWS* For Heavy-Wall Steel Pipe 8 - 12 200 - 300 42 19.1
74710 472-CI For Cast-Iron Pipe 8 - 12 200 - 300 42 19.1
Pipe capacity = maximum nominal diameter of steel pipe
*Furnished with X-tra sharp wheel for up to 40% faster cutting
4-Wheel Pipe Cutters
• Designed for work in areas where a complete turn is impossible.
• Model 42-A has a short handle for use in conned areas.
• Second handle on Model 44-S makes two-man leverage possible for
large pipe sizes.
• Both models are equipped with four heavy-duty wheels.
Catalog
No.
Model
No. Description
Pipe Capacity
Nominal Size Weight
in. mm lb. kg
32870 42-A Heavy-Duty 4-Wheel 3/4-2 20-50 6
3/43.1
32880 44-S Heavy-Duty 4-Wheel 21/2- 4 65 - 100 20 9.1
No.44-S
No.42-A
Three- and four-wheel pipe cutters should only be used when
the cutter cannot be rotated completely around the pipe.
PIPE/TUBE CUTTING & PREPARATION
3.4
No. 206 Soil Pipe Cutter
• Cuts 11/2"-6" No Hub®soil pipe.
• Lighter weight and closer spacing of cutter wheels, together with simple ratcheting
action, give smooth cut on lighter wall pipe.
• Ratchet-action handle parallel to pipe allows for application in trenches of minimum width.
• Complete with hand guard to protect operator’s knuckles when cutting.
Catalog
No. Model No. Description Capacity Weight Replac. Chain
Catalog No.
in. mm lb. kg
68650 206 Soil Pipe Cutter No Hub 11/2-6 50-150 18 8.20 33670
No. 226 In-Place Soil Pipe Cutter
• The RIDGID 226 In-Place Soil Pipe Cutter is a compact, lightweight tool designed to cut
hub 1½" (40 mm) to 6" (150 mm) and hubless soil pipe in tight quarters.
• Only 17" (43 cm) long, the Model 226 is perfect for cutting cast iron, cement and clay pipe
where space is limited.
• The Model 226 is especially suited for against-the-wall and other tight quarter applications.
• From the Model 226’s compact design to its unique chain latching mechanism, every
feature has been engineered for maximum productivity.
Catalog
No.
Model
No. Description
Pipe Capacity
Nominal Size
Replac. Chain
Catalog No. Weight
in. mm lb. kg
69982 226 In-Place Soil Pipe Cutter 2 - 6 40 - 150 33670 18 8.20
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
33665 206/226/276 Chain Extension Assy.* 13.50
*Do not use more than one chain extension except for clay pipe up to 15"
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
70437 226 Ratchet For 226 Soil Pipe Cutter 18 8.20
33665 206/226/276 Chain Extension Assy.* 13.50
Model Material/Size
226 206 276 246
▲ ▲▲▲
Clay pipe, 8"*
▲ ▲▲▲
Service weight cast iron solid pipe, 8"*
▲ ▲▲▲
No hub cast iron soil pipe, 8"*
• • • • Concrete pipe, 4"-6"
• • • • Clay pipe, 11⁄2"-6"
• Class 22 water main, 4"
• Extra heavy-duty cast iron soil pipe, 2"-5"
• • • • Service weight cast iron soil pipe, 11⁄2"-6"
• • • • No hub cast iron soil pipe, 11⁄2"-6"
• Standard chain. ▲Chain with one chain extension.
Soil Pipe Cutter Tool Capacity/Selection
• Models 206, 226 and 276 all have the same chain.
• Model 246 has a heavier chain.
*Up to 15" clay pipe only can be cut with an extended chain.
Soil Pipe Cutters
* Do not use more than one chain extension except for clay pipe up to 15"
3.5
PIPE/TUBE CUTTING & PREPARATION
238-P Powered Soil Pipe Cutter
• Model 238-P Powered Soil Pipe Cutter cuts cast iron pipe quickly and easily in tight
spaces. The 238-P is designed to cut up to 8" soil pipe when driven by an impact driver or
4" with the included ratchet.
• Dual Powered – Operates using a 1/2" square drive impact driver or ratchet.
• High Capacity – Cuts 8" diameter soil pipe when used with an impact driver (minimum 200
ft-lbs) or 4" manually.
• Compact – The 11.5" (29.5 cm) length, removable handle, low prole cutter wheels and
compact design ts into tight places in both overhead and below grade applications.
• Lightweight – At 13.5 pounds mounting the tool in difcult places is easy.
• Easy Set-Up – Articulating outward facing chain hooks lay on the pipe to simplify latching.
• Clean Cut – Two directional operation allows scoring of the pipe for a clean cut.
• Durable – Patent pending torque limiter helps protect the tool from overloading.
Specifications
Capacity
• Ratchet – 11/2" - 4" No-Hub Soil Pipe.
– 2" - 4" Service Weight Soil Pipe.
– 2" - 4" Clay Pipe.
– 4" Concrete Pipe.
• Impact – 11/2" - 8" No-Hub Soil Pipe.
– 2" - 8" Service Weight Soil Pipe.
– 2" - 8" Clay Pipe.
– 4" - 6" Concrete Pipe.
Catalog
No.
Model
No. Description
Capacity
Nominal Pipe
Size
Weight
in. mm lb.
42878 238-P Powered Soil Pipe Cutter 8200 14
No. 246 Soil Pipe Cutter
• Cuts 11/2"-6" clay, cast-iron clay pipe or cement pipe and 4" class 22 water main.
• Ratchet-action handle parallel to pipe allows for application in minimum width trenches.
• Complete with hand guard to protect operator’s knuckles when cutting.
Catalog
No.
Model
No. Description
Pipe Capacity
Nominal Size Weight Replac. Chain
Catalog No.
in. mm lb. kg
32900 246 Soil Pipe Cutter 11/2- 6 40 - 150 25 11.3 34575
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
34570 246 Chain Extension Assy.* 13.50
*Do not use more than one chain extension except for clay pipe up to 15"
Make cutting soil pipe easier with a Press Snap™ cutter. It works
with all RIDGID standard press tools. See 10.11 for more information.
Soil Pipe Cutters
PIPE/TUBE CUTTING & PREPARATION
3.6
No. 276 Soil Pipe Cutter
• Provides one stroke cutting of 11/2"-6" service weight, No Hub soil pipe, clay and concrete
pipe. Makes repeated cuts quickly.
• Expand capacity up to 8" service weight soil pipe by ordering Catalog No. 33665 Chain
Extension Assembly.
Catalog
No.
Model
No. Description Capacity Weight
in. mm lb. kg
74207 276 Soil Pipe Cutter 11/2- 6 50 - 150 233/411.70
No. 228 Soil Pipe Assembly Tool
• Handles all 1½" (40 mm) to 8" (200 mm) gasketed soil pipe without extra, loose attachments.
• Easy assembly of Y, tee and elbow ttings, as well as straight lengths from any angle.
• Slim, compact design lets one man assemble even large sizes quickly and easily.
• Removal of handle facilitates vertical and overhead pipe assembly.
Catalog
No.
Model
No. Description Capacity Weight
in. mm lb. kg
32905 228 Soil Pipe Assembly Tool 11/2- 8 40 - 200 223/410.3
Torque Wrenches
• Preset to eliminate guesswork in No Hub soil pipe installations.
• Assures proper coupling tightness for strong, leak-free joints.
• No. 902 Torque Wrench – The 5/16" drive tightens with a fast ratchet action until the
wrench clicks for accurate 60 inch-pounds torque.
• No. 904 Torque Wrench – The 3/8" drive tightens with a fast ratchet action until the
wrench clicks for accurate 80 inch-pounds torque.
Catalog
No.
Model
No. Description Torque Weight
in. lb. NxM lb. kg
31410 902 Torque Wrench for No Hub Cast-Iron Soil Pipe Couplings 60 71/20.20
14988 904 Torque Wrench for No Hub Cast-Iron Soil Pipe Couplings 80 91/20.20
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
33665 206/226/276 Chain Extension Assy.* 13.50
*Do not use more than one chain extension except for clay pipe up to 15"
Soil Pipe Cutters
3.7
PIPE/TUBE CUTTING & PREPARATION
Heavy-Duty Pipe Cutter Replacement Wheels
Pipe Cutters
(Original Product)
Model
Catalog No.
32810
32820
32830
32840
32850
32870
32880
32895
68650
69982
32900/74207
74207
42370
73162
74227
74685
83080
83085
74700
83145
83150
74710
83165
83170
42390/34617
58657
26212
Model No.
1A
2A
3S
4S
6S
42A
44S
202
206
226
246/266
276
360
424S
424CI
466C
466S
466HWS
468C
468S
468HWS
472C
472S
472HWS
820/364
732
764
Cutter Wheels
Catalog
No.
Model
No.
Standard
Pack
Blade
Exp. Application/Material
33220 E-109 1.360 •• • Cast Iron
44185 E-1032 6 .450 ▲•• Steel Pipe & Ductile Iron
44190 E-1032S 6 .450 ▲▲▲
S.S. Pipe
33135 E-1962 1.265 ▲▲ ▲ •▲▲•▲▲•▲▲ Grey Cast Iron
33225 E-2632 1.244 •Cast Iron
83140 E-3186 1.680 ▲▲▲▲▲▲▲▲▲ Steel & Ductile Iron HW
75557 E-4266 4.665 ▲▲•▲▲•▲▲ •Heavy Wall Steel
75572 E-2267 4.400 ▲•Cast & Ductile Iron
33105 F-3 12 .312 ▲▲ •▲▲ ▲▲
Steel & Ductile Iron
33110 F-3S 6 .312 ▲▲ ▲ ▲ ▲ ▲▲ S.S. Pipe
33115 F-119 1.132 ▲▲ ▲ ▲ ▲ ▲▲ Grey Cast Iron
33125 F-229 6 .411 ▲▲ •▲▲▲▲▲▲▲▲▲ •Steel & Ductile Iron
33130 F-229S 6 .411 ▲▲ ▲ ▲▲▲▲▲▲▲▲▲ ▲
S.S. Pipe
75567 F-366 4.375 •▲Steel Pipe
33145 F-367 1.470 •Steel & Ductile Iron
33150 F-367-S 1.470 ▲S.S. Pipe
33155 F-383 1.265 ▲Grey Cast Iron
33100 F-514 6 .312 •• ▲•• ▲▲ Steel & Ductile Iron
33120 F-515 6 .411 •• ▲ ▲▲▲▲▲▲▲▲▲ ▲
Steel & Ductile Iron
75562 F-546 4.433 ▲•▲▲•▲▲•▲Steel Pipe
•Denotes Cutter Wheels furnished with original product. ▲Denotes alternate Cutter Wheel.
Always use genuine RIDGID cutter wheels. These wheels are precision-machined from high-grade
steel and are engineered for long life and maximum cutting accuracy.
PIPE/TUBE CUTTING & PREPARATION
3.8
Reamers, Extractors & Taps
Pipe Reamers
• Model 2-S Spiral Ratchet Reamer – Self-feeding spiral design for extra-fast and easy hand
reaming. Model 2-S Reamer is not suitable for power reaming.
• Models 2 and 3 Ratchet Reamers – Long taper design will not dig in. Suitable for use with power
drives.
• Model 254 Spiral Ratchet Reamer – Hollow center reduces weight. Large pressure plate.
Hardened alloy steel cone removable for sharpening. Not suitable for power reaming.
Catalog No. Model
No. Description Capacity Weight Replac. Cone
Catalog No.
in. mm lb. kg
34955 2-S Spiral Reamer 1/4-2 6-50 71/43.3 35020
34945 2 Straight Reamer 1/8-2 3-50 73.2 34975
34950 3Straight Reamer 3/8-3 9-75 111/25.2 35090
34960 254 Spiral Reamer 21/2-4 62-100 14 6.4 35135
Pipe Extractors
• RIDGID®pipe extractors make easy work of removing broken threaded ends of pipe, pipe plugs
and ttings. Available for schedule 40 and 80 pipe.
• Each is plainly marked showing drill size used when solid ends of plugs and ttings must be drilled
to receive extractor.
Catalog No.
Schedule 40
Model No.
Schedule 40 Catalog No. Model No.
Schedule 80
Pipe Size Length
Overall Use Drill Weight Std.
Pack
in. mm in. mm in. mm oz. g
35595 80 1/832.2 56 1/463/421 6
35600 81 -1/46 2.5 62 3/891
1/243 6
35605 82 - 3/810 2.8 69 1/212 21/261 6
35610 83 35640 1/212 3.0 65 5/816 4 113 6
35615 84 35645 3/420 3.2 81 13/16 20 71/2213 6
35620 85 35650 125 3.5 87 11/16 26 121/2354 6
35625 86 35655 11/432 3.8 94 13/834 20 567 6
35630 87 35660 11/240 4.0 100 19/16 39 26 737 6
35635 89 35665 2 50 4.5 112 21/16 52 50 1,417 6
Pipe Taps: Hand Use Only
• Made from carbon steel in right hand conguration only.
• These taps are especially suited for restricted area work.
• All taps have taper of 3/4" per foot.
• Marked with drill size for pilot hole.
Catalog No. Model
No. Description
Drill
Size
Nominal
Pipe Size Thread Weight Std.
Pack
in. in. mm in. lb. kg
35815 E-5112 1/8Pipe Tap-NPT 21/64 1/8327-27 1/16 0.03 1
35820 E-5113 1/4Pipe Tap-NPT 7/16 1/46 18-18 1/80.06 1
35825 E-5114 3/8Pipe Tap-NPT 9/16 3/810 18 - 18 1/40.10 1
35830 E-5115 1/2Pipe Tap-NPT 45/64 1/212 14 - 14 1/40.10 1
35835 E-5116 3/4Pipe Tap-NPT 29/32 3/420 14 - 14 1/20.20 1
35840 E-5117 1 Pipe Tap-NPT 1 9/64 125 111/2-11
1/210.50 1
35845 E-5118 1 1/4Pipe Tap-NPT 1 31/64 11/432 111/2-11
1/211/40.60 1
35850 E-5119 1 1/2Pipe Tap-NPT 1 47/64 11/240 111/2-11
1/22 0.90 1
35855 E-5120 2 Pipe Tap-NPT 2 13/64 2 50 111/2-11
1/231/41.50 1
Pipe Extractor Sets
Catalog No. Model
No.
Capacity/Pipe Size Set includes Weight Std.
Pack
in. mm oz. g
35670 880 0.1 - 0.5 3 - 12 Nos. 80 to 83 Inclusive 8227 1
35675 881 0.2 - 0.8 6 - 20 Nos. 81 to 84 Inclusive 16 454 1
35680 882 0.2 - 1.0 6 - 25 Nos. 81 to 85 Inclusive 28 794 1
35685 883 0.1 - 1.0 3 - 25 Nos. 80 to 85 Inclusive 28 794 1
Model No. 2-S
Model No. 2&3
3.9
PIPE/TUBE CUTTING & PREPARATION
Model 258 Power Pipe Cutter
The RIDGID®Model 258 Power Pipe Cutter cuts 21/2" (65 mm) to 8" (200 mm)
schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. at the job site or in
the shop. Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement
cutter that provides square cuts. The operator controls the feeding rate by pumping
the hydraulic foot pump throughout the operation. A square cut with minimal
burr on either 21 ft (6m) or nipple lengths of pipe is achieved quickly** without
abrasive dust, sparks, or open ame. Also, the RIDGID Pipe Roller for beveling can
be used to rotate the pipe while second operator uses a grinder to bevel the pipe.
• Square cut 21ft (6m) or nipple lengths of pipe without effort.
• Easily cuts by displacing instead of removing pipe material.
• No abrasive dust, dangerous sparks, or open ame.
• Quickly cuts steel pipe with minimal burr.
• Great for cutting pipe for groove joining.
• Heavy-duty design is perfect for eld or shop use.
• Adaptable for beveling.
Standard Equipment
• 42620 – Square Drive Adapter - 15/16".
• 60002 – 2 Ball transfer Pipe Supports 21/2" (65mm) to 12" (300mm).
• 66687 – 81/2" H-D Cutter Wheel Assembly (includes HD Cutter Wheel, hub w/
pins, cover plate).
– Pump, HF32 Hydraulic Foot.
– RAM, Hydraulic 258.
Specifications
• Cutting Capacity – 21/2" (65 mm) to 8" (200 mm) schedule 10*/40 steel pipe.
• Powered by a model 700 Power Drive (not included).
• Power Drive RPM – 26-30 (no load).
• Weight – 105 lbs. (48 kg) (excludes Power Drive).
Catalog
No.
Model
No. Description Weight
lb. kg
50767 258 Pipe Cutter 105 48
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
66687 -81/2" H-D Cutter Wheel Assembly (includes HD Cutter
Wheel, hub w/pins, cover plate) 13 6
50812 E-258 8 1/2" H-D Cutter Wheel only 2 1
58222 E258-T 8 1/2" Thin Wall Cutter Wheel Only (PVC and Steel) 2 1
54397 -Transport Cart 24 11
60002 258PS Ball transfer Pipe Support 2 1/2" (65mm) to 12" (300mm) 21 10
61757 -Pipe Roller for Beveling (for Model 258 only) 13 6
*Use the thin wall cutter wheel for best results.
**Cutting time varies with pipe schedule and diameter.
Note: Model 258 is not recommended to cut cast iron pipe.
For Optimum wheel life always properly support the work piece with ball transfer pipe supports.
Model 700 ready for mounting on Model 258
Unit.
Model 258 with Pipe Roller in use for
beveling. Two operators are recommended for
this operation
Model 258 Pipe Cutter with No. 700 Power
Drive in use for cutting Do not overfill the hydraulic pump on power pipe cutters.
Excess oil will purge out of seals on pump and ram.
Power Pipe Cutters
PIPE/TUBE CUTTING & PREPARATION
3.10
Model 258XL Power Pipe Cutter
The RIDGID®258XL offers 8" (200 mm) to 12" (300 mm) diameter pipe cutting capacity.
Powered by the RIDGID No. 700 Power Drive, the 258XL is a displacement cutter that provides
square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump
throughout the operation. A square cut with minimal burr on either 21ft (6m) or nipple lengths
of pipe is achieved quickly**without abrasive dust, sparks, or open ame. Now one person can
easily square cut 12" schedule 40 pipe in minutes. Also, the RIDGID Pipe Roller for beveling can
be used to rotate the pipe while second operator uses a grinder to bevel the pipe.
• Square cut 21ft (6m) or nipple lengths of pipe without effort.
• Easily cuts by displacing instead of removing pipe material.
• No abrasive dust, dangerous sparks, or open ame.
• Quickly cuts steel pipe with minimal burr.
• Great for cutting pipe for groove joining.
Standard Equipment
• 42620 – Square Drive Adapter - 15/16".
• 60002 – 2 Ball transfer Pipe Supports 21/2" (65mm) to 12" (300mm).
• 66687 – 81/2" H-D Cutter Wheel Assembly (includes HD Cutter Wheel, hub w/pins,
cover plate).
– Pump, HF32 Hydraulic Foot.
– RAM, Hydraulic 258.
Specifications
• Cutting Capacity – 8" (200mm) to 12" (300mm) schedule 10*/40 steel pipe.
• Powered by a model 700 Power Drive (not included)Power Drive RPM – 26-30 (no load).
• Weight – 140lbs. (63kg) (excludes No. 700 Power Drive).
Catalog No. Model No. Description Weight
lb. kg
58227 258-XL Pipe Cutter 145 66
Accessories
Catalog No. Model No. Description Weight
lb. kg
66687 -81/2" H-D Cutter Wheel Assembly (includes HD Cutter
Wheel, hub w/pins, cover plate) 13 6
50812 E-258 8 1/2" H-D Cutter Wheel only 2 1
58222 E258-T 8 1/2" Thin Wall Cutter Wheel Only (PVC and Steel) 2 1
54397 -Transport Cart 24 11
60002 258PS Ball transfer Pipe Support 2 1/2" (65mm) to 12" (300mm) 21 10
61757 -Pipe Roller for Beveling (for Model 258 only) 13 6
*Use the thin wall cutter wheel for best results.
**Cutting time varies with pipe schedule and diameter.
Note: Model 258 is not recommended to cut cast iron pipe.
For Optimum wheel life always properly support the work piece with ball transfer pipe supports.
When using 258 and 258XL pipe cutters with long lengths of pipe, it
is especially important to properly support the pipe to prevent cutter
wheel damage. Extra pipe supports may be needed and the work area
must be level.
Power Pipe Cutters
3.11
PIPE/TUBE CUTTING & PREPARATION
Dry Cut Saw / Model 614
The Model 614 features carbide-tipped blades to cut different materials and geometric
congurations without cutting uid. Cutting with the Model 614 generates no burr, abrasive
dust or heat, providing clean and fast cuts on steel, copper, plastic and wood. Either straight
or miter, the Model 614 offers the largest cutting capacity in its class.
Standard Equipment
• 71692 – 14" Carbide-Tipped Blade 80 Tooth for 614.
Specifications
• Powerful 15 amp 2HP motor
• Speed 1,300 RPM
• Miter cut up to 45°
• Blade dimensions 14" x 80T x 0.087" x 1"
• Spindle lock
• Dust collector
• Built-in maintenance tools
• Exclusive quick-acting vise
• Approved by CSA to CSA and UL standards (115V Only)
Catalog No. Model No. Description Weight
lb. kg
71687 614 Dry-Cut Saw, 115V, 60Hz 47 21
72862 614 Dry-Cut Saw, 230V, 60Hz 47 21
Model 614 Capacity
Cutting
Angle
Workpiece Geometry
90°Cuts 51⁄8" O.D.
130 mm
33⁄4"x7"
95 mm x 180 mm
43⁄4"x4
3⁄4"
120 mm x 120 mm
45°Cuts 41⁄8" O.D.
105 mm
31⁄3"x4"
80 mm x 100 mm
43⁄4"x4
3⁄4"
90mmx90mm
Blades for RIDGID Models 614 and 590 Dry Cut Saws
Catalog
No.
Model
No. Description Weight
lb. kg
71697 –12" Carbide-Tipped Blade 60 Tooth for 590 2 0.90
71692 –14" Carbide-Tipped Blade 80 Tooth for 614 31.30
Saws
PIPE/TUBE CUTTING & PREPARATION
3.12
122 Cutting and Prep Machine
This machine is designed to cut, clean, ream and deburr copper and stainless steel tubing
and ttings quickly and professionally. Weighing only 50 lbs (23kg) and possessing a
conveniently located carrying handle, the 122 is ideal for transport directly to the job site.
Rugged cast aluminum housing and powerful 1/3HP (360W) induction motor assure long life.
• Tube and Fitting Capacity: 1/2" - 2" (12 mm-54 mm).
• Powerful 1/3HP (360W) induction motor drives rollers at 450 RPM.
• Rugged O.D. Cleaning Brush cleans tubing quickly with minimal effort.
• Core Reamer easily removes turbulence-causing burrs.
• Cutting Handle adjusts to accommodate different tubing sizes.
• Large Carrying Handle for easy transport to the job site.
• Guide Rollers ensure a straight cut with no tracking.
• Built-in 1/2" (12 mm) Incremental Scale for quick, easy measuring.
• Copper cutter wheel tested to over 10,000 cuts.
• Fitting Brush Kit includes six brushes, storage rack and collet.
• Approved by CSA to CSA and UL standards (115V only).
Standard Equipment
• 93707 – Fitting Brush Storage Kit Includes Mountable Storage Rack, Quick-Change Collet,
Spare Cutter Wheel, and Brushes (1/2", 3/4", 1", 11/4", 11/2", 2").
• 94682 – O.D. cleaning brush.
• 94687 – 2" Reamer Cone Assembly.
Specifications
• Copper and Stainless Steel Tube Capacity – 1/2" - 2" (12 mm-54 mm).
• Copper and Stainless Steel Fittings Capacity – 1/2" - 2" (12 mm-54 mm).
• For ASTM B88 types K, L, M copper.
• For stainless steel wall thickness up to .065" (1.65 mm).
• Switch – Toggle On/Off.
• Cutter Wheel – Model 2191 HD Wheel.
• Roller Speed – 450 RPM.
• Reamer – Single Flute Cone, RH, 1/2"to2".
• Motor – 1/3HP, 115V, 60Hz Induction Motor or 360W, 230V Induction Motor (EU only).
Catalog
No. Model No. Description Voltage Weight
V lb. kg
93492 122 Copper Cutting/Prep Machine 1/2"–2" 115 50 22.68
Accessories
Catalog
No. Model No. Description Weight
lb. kg
93717 -1/2" Fitting Brush 12 mm (3 Per Pack) 1/20.24
93722 -3/4" Fitting Brush 18 mm (3 Per Pack) 1/20.26
93727 - 1" Fitting Brush 25 mm (3 Per Pack) 3/40.27
93732 -11/4" Fitting Brush 32 mm (3 Per Pack) 3/40.29
93737 -11/2" Fitting Brush 40 mm (3 Per Pack) 13/40.77
93742 - 2" Fitting Brush 50 mm (3 Per Pack) 13/40.79
94682 - O.D. cleaning brush 10.44
93747 - Quick-Change Collet 21/40.95
93712 - Fitting Brush Holder 6 2.63
93707 -
Fitting Brush Storage Kit Includes Mountable Storage Rack, Quick-
Change Collet, Spare Cutter Wheel, and Brushes (1/2", 3/4", 1", 11/4",
11/2", 2")
31.39
36662 301A Model 301A Foot Switch120V 71/23.39
33175 2191 Cutter Wheel for Copper 1/40.10
33551 122SS Cutter Wheel for Stainless Steel 1/40.10
10343 - Wheel Pin for 33551 Cutter Wheel 1/40.10
94687 - 2" Reamer Cone Assembly 1/16 0.03
Copper Cutting
Prep Machines
3.13
PIPE/TUBE CUTTING & PREPARATION
122XL Copper Cutting and Prep Machine
This machine is designed to cut, clean, ream and debur copper and stainless steel tubing and
ttings quickly and professionally. Weighing only 72 lbs (32.7 kg) and possessing a conveniently
located carrying handle, the Model 122XL is ideal for transport directly to the job site. Rugged
cast aluminum housing and powerful 1/3HP (360 W) induction motor assures a long life.
• Tube and Fitting Capacity: 1/2" - 4" (12 mm - 108 mm).
• Powerful 1/3HP induction motor drives rollers at 300 RPM.
• Rugged O.D. Cleaning Brush cleans tubing quickly with minimal effort.
• Core Reamer easily removes turbulence-causing burrs.
• Cutting Handle adjusts to accommodate different tubing sizes.
• Large Carrying Handle for easy transport to the job site.
• Guide Rollers ensure a straight cut with no tracking.
• Built-in 1/2"-Incremental Scale for quick, easy measuring.
• Cutter Wheel tested to over 10,000 cuts.
• Fitting Brush Kit includes six brushes, storage rack and collet.
• Approved to UL standards (NRTLC) (115V only).
• CSA approved (115V only).
Standard Equipment
• 46105 – O.D. Debur Disk.
• 94687 – 2" Reamer Cone Assembly.
• 94682 – O.D. cleaning brush.
Specifications
• Copper and Stainless Steel Tube Capacity – 1/2" - 4" (12 mm-108 mm).
• Copper and Stainless Steel Fittings Capacity – 1/2" - 4" (12 mm-108 mm).
• For ASTM B88 types K, L, M copper.
• For stainless steel wall thickness up to .065" (1.65 mm).
• Switch – Toggle On/Off.
• Cutter Wheel – Model 122 SS.
• Roller Speed – 300 RPM.
• Reamer – Single Flute Cone, RH, 1/2"to2".
• Motor – 1/3HP, 115V, 60Hz Induction Motor or 360W, 230V Induction Motor.
Catalog No. Model No. Description Voltage Weight
Vlb. kg
10973 122XL Copper Cutting/Prep Machine 1/2"–4" 115 72 32.7
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
93717 -1/2" Fitting Brush 12 mm (3 Per Pack) 1/20.24
93722 -3/4" Fitting Brush 18 mm (3 Per Pack) 1/20.26
93727 - 1" Fitting Brush 25 mm (3 Per Pack) 3/40.27
93732 -1
1/4" Fitting Brush 32 mm (3 Per Pack) 3/40.29
93737 -1
1/2" Fitting Brush 40 mm (3 Per Pack) 13/40.77
93742 - 2" Fitting Brush 50 mm (3 Per Pack) 13/40.79
12638 -2
1/2" Fitting Brush (3 Per Pack)–122XL Only 13/40.79
12643 - 3"-4" Fitting Brush (3 Per Pack)–122XL Only 2 0.82
94682 - O.D. cleaning brush 10.44
46105 - O.D. Debur Disk 11/40.57
93747 - Quick-Change Collet 21/40.95
93712 - Fitting Brush Holder 6 2.63
93707 -Fitting Brush Storage Kit Includes Mountable Storage Rack, Quick-Change Collet,
Spare Cutter Wheel, and Brushes (1/2", 3/4", 1", 1 1/4", 1 1/2", 2") 31.39
36662 301A Model 301A Foot Switch120V 71/23.39
33175 2191 Cutter Wheel for Copper 1/40.10
33551 122SS Cutter Wheel for Stainless Steel 1/40.10
10343 - Wheel Pin for 33551 Cutter Wheel 1/40.10
42360 1206 1206 Stand 31 14.10
94687 - 2" Reamer Cone Assembly 1/16 0.03
Copper Cutting
Prep Machines
PIPE/TUBE CUTTING & PREPARATION
3.14
Tubing Cutters
Pipe Cutter Page No. Diameter Material / Diameter
Steel / Stainless Copper Aluminum Plastic/PVC
Close Quarters Tubing Cutters 3.14 1⁄4"-1
1⁄8"•••
2-in-1 Close Quarters AUTOFEED™Cutter 3.15 1⁄4"-1
1⁄8"•••
Constant Swing Tubing Cutters 3.15 1⁄8"-1
3⁄8"•••
Enclosed Feed Tubing Cutters 3.16 1⁄4"-2
3⁄8"•••
Quick-Acting Tubing Cutters 3.16 1⁄4"-6
5⁄8"••••
Screw Feed Tubing Cutters 3.17 ?? •••
Internal Tubing Cutters 3.17 2-4 ••••
Stainless Steel Duty Tubing Cutters 3.17 3⁄16"-2
5⁄8"•••
Plastic Pipe Cutters 3.18-3.20 1⁄8"-1
7⁄8"•
Tubing Cutter Selection
Close Quarters Tubing Cutters
Specically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum,
brass and plastic tubing.
• Rollers include grooves for close-to-are cuts.
• Strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control
of cutting pressure for clean cuts.
• Models 117 and 118 include a self-feeding cutter wheel that automatically cuts after tightening the
knob only once (AUTOFEED®).
• The Model 118 features a special knob for easier tightening of the feedscrew.
Catalog
No.
Model
No. Description Std.
Wheel
Capacity Weight Std.
Pack
in. mm lb. kg
40617 101* Midget Cutter E-3469 1/4-1
1/86-28 1/20.23 6
32975 103 Midget Cutter E-3469 1/8-5/83-16 1/30.15 6
32985 104 Midget Cutter E-3469 3/16 -15/16 5-24 1/30.15 6
97787 117* Autofeed 2-in-1 Midget Cutter E-3469 3/16 -15/16 5-24 1/30.15 12
86127 118* Close Quarters AUTOFEED Cutter Only E-3469 1/4-1
1/86-28 5/80.26 6
*Models 101, 117 and 118 include spare cutter wheel in knob
For best cutting results, change the cutter’s wheel pin at
least once for every two cutter wheel replacements.
3.15
PIPE/TUBE CUTTING & PREPARATION
2-in-1 Close Quarters AUTOFEED™ Cutter
The RIDGID®Model 118 Close Quarters AUTOFEED™ Cutter can now be enhanced with a ratchet
handle that allows for easier cutting in tight, restricted spaces. Of rugged and compact design, the
handle can be attached to the cutter and operated in ratchet steps as small as 10 degrees. This
allows for ne indexing of the cutter to operate in tight spaces. The new ratchet handle allows
more exibility and mobility while keeping the AUTOFEED features of the model 118 Cutter, which is
designed to cut hard and soft copper, aluminum and brass.
• Featuring the NEW 2-in-1 Close Quarters Cutter where the cutter can be used alone or with the
ratchet handle, a light and ergonomic accessory to help use the cutter in tight and restricted
spaces.
• Easy to use in hard-to-reach areas because the knob only needs to be tightened once.
• Adjustable to any size from 1/4"–1
1/8" (6-28 mm) OD.
• Tubing cutter comes with a spare E-3469 Cutter Wheel in knob.
• New football-shaped knob in the cutter.
• Ratchet handle also compatible with Model 101 tubing cutter.
Catalog
No. Model No. Description Capacity Weight Std.
Pack
in. mm lb. kg
32573 118 2-In-1 Close Quarters Quick-Feed Cutter with Ratchet
Handle 1/4-1
1/86-28 11/16 0.48 1
86127 118 Close Quarters AUTOFEED Cutter Only 1/4-1
1/86-28 5/80.26 6
32933 118 Ratchet Handle Only for 101 and 118 Tubing Cutter --5/80.26 1
Constant Swing Tubing Cutters
• Features an enclosed feed screw to eliminate clogging and jamming, grooved rollers for close-to-
are cuts, and a fold-away reamer.
• X-CEL Knob – cut tubing more quickly and easily with our larger, more ergonomic designs.
• X-CEL Wheel Pin – change your cutter wheel quickly using our new ball detent design…no tool
needed…no lost clips!.
• Spare cutter wheel included in the knob.
• Made from high-strength zinc alloy.
• Cuts copper, brass, and aluminum tubing and thin-wall conduit.
Catalog
No.
Model
No. Description Std.
Wheel
Capacity Range Weight Std.
Pack
in. mm lb. kg
31622 150 Constant Swing Cutter E-3469 1/8-1
1/83-28 10.44 6
31627 150 Above w/H-D Wheel(s) E-4546 1/8-1
1/83-28 10.44 6
66737 150-L Constant Swing Cutter E-3469 1/8-1
3/83-35 10.44 6
66742 150-LS Above with Heavy Duty Wheel E-4546 1/4-1
3/86-35 11/80.47 6
Model 150
Spare wheel
included in knob
X-CEL Knob = quicker cut
X-CEL Pin =
quicker wheel change
Tubing Cutters
PIPE/TUBE CUTTING & PREPARATION
3.16
Enclosed Feed Tubing Cutters
• Features an enclosed feed screw to eliminate clogging and jamming.
• X-CEL Knob - cut tubing more quickly and easily with our larger, more ergonomic designs.
• X-CEL Wheel Pin - change your cutter wheel quickly using our new ball detent design..no tool
needed.. no lost clips!.
• Grooved rollers for close-to-are cuts.
• Spare cutter wheel included in the knob.
• Fold-away reamer.
• Made from high-strength zinc alloy.
• Cuts hard / soft copper, aluminium, brass and multilayer tubes.
Catalog
No.
Model
No. Description Std.
Wheel
Capacity Weight Std.
Pack
in. mm lb. kg
33055 205 Ratcheting Encl. Feed Cutter E-3469 1/4-2
3/86 - 60 2 0.91 1
33070 205S* Above with Heavy Duty Wheel E-4546 1/4-2
3/86 - 60 2 0.91 1
*Model 205S is suitable for Stainless Steel
Quick-Acting Tubing Cutters
• Models 151-156 feature a quick-acting design, I-beam construction, hardened wear surfaces and
thrust bearing slide assemblies for smooth operation.
• X-CEL Knob - cut tubing more quickly and easily with our larger, more ergonomic designs.
• X-CEL Wheel Pin - change your cutter wheel quickly using our new ball detent design..no tool
needed.. no lost clips!.
• Available in models for plastic pipe or metallic tubing.
• Models 151 and 152 feature fold-away reamers.
• Model 151-ML is suitable for cutting multilayer tubing.
Catalog
No. Model No. Description Std. Wheel Capacity Weight Std.
Pack
in. mm lb. kg
31632 151 Quick-Acting Cutter E-3469 1/4-1
7/86-42 11/40.56 6
31637 151-P Above w/Wheel For Plastic E-2155 1/8-1
1/410-40 11/40.56 6
66747 151-ML Quick-Acting Tubing Cutter E-545 1/8-1
1/210-50 10.50 1
31642 152 Quick-Acting Cutter E-3469 1/4-2
5/86 - 66 2 0.92 1
31647 152-P Above w/Wheel For Plastic E-2155 1/4- 2 10 - 63 2 0.92 1
36597 153 Quick-Acting Cutter E-3469 11/4-3
1/232 - 90 2 0.92 1
36592 153-P Above w/Wheel For Plastic E-2155 1 - 3 25 - 75 2 0.92 1
31652 154 Quick-Acting Cutter E-2558 17/8-4
1/248 - 116 37/81.72 1
31657 154-P Above w/Wheel For Plastic E-2156 11/2-4 50-110 37/81.72 1
31662 156 Quick-Acting Cutter E-2558 4 - 65/8100 - 170 52.23 1
31667 156-P Above w/Wheel For Plastic E-2157 4 - 6 110 - 160 52.23 1
RIDGID®Quick-Acting plastic cutter models are equipped to easily convert
to cut copper or other metallic tubing.
1. Remove spare copper cutting wheel from knob.
2. Reverse knob position so that the “Cu” notation is visible inside the knob.
3. Screw knob back on to handle.
4. Using the X-CEL Wheel Pin, you can quickly replace the existing plastic cutting wheel with the
copper cutting wheel. You’re now ready to cut copper, aluminum, and brass tubing.
5. When you wish to revert to plastic cutting, follow the same instructions but make sure to reposition
knob so that “PE” and “PVC” notations are visible inside knob.
Model 205
Fold-in reamer
Grooved roller
Model 151
Spare wheel
included in knob
X-CEL Knob = quicker cut
X-CEL Pin =
quicker wheel change
Tubing Cutters
3.17
PIPE/TUBE CUTTING & PREPARATION
Screw Feed Tubing Cutters
• Clean, square cuts are easily made on copper, brass, aluminum and thin-wall steel.
• X-CEL Knob – cut tubing more quickly and easily with our larger, more ergonomic designs.
• Models 10, 15 and 20 feature a convenient fold-away reamer.
Catalog
No.
Model
No. Description Std.
Wheel
Capacity Weight Std.
Pack
in mm lb. kg
32910 10 Tubing and Conduit Cutter F-158 1/8-1 3-25 7/80.40 6
32915 10 Above w/H-D Wheel E-1240 1/8-1 3-25 7/80.40 6
32920 15 Tubing and Conduit Cutter F-158 3/16-11/85-28 1/20.68 6
32925 15 Above w/H-D Wheel E-1240 3/16-11/85-28 1/20.68 6
32930 20 Tubing and Conduit Cutter F-158 5/8-21/816-54 13/40.79 1
32935 20 Above w/H-D Wheel E-1240 5/8-21/816-54 13/40.79 1
32940 30 Tubing and Conduit Cutter E-2558 1-31/825-79 31/21.60 1
32950 30 Above w/H-D Wheel (for steel) E-2191 1-31/825-79 31/21.60 1
Stainless Steel Tubing Cutters
These tubing cutters have been designed for optimized performance on Stainless Steel tube.
• A contoured frame allows for easy alignment while adjusting the cutter to make a cut.
• Ergonomic knob allows for easy adjustments.
• Six individual bearings in the 15-SI and 35S and 12 in the 65S replace traditional rollers. The
bearings create a smoother cut, and allow for increased speed around the tube.
• Specially designed Stainless Steel cutter wheel in 35S and 65S contains bearings in the hub, to
decrease drag around the tube for a smoother cut.
Catalog
No.
Model
No. Description Std.
Wheel
Capacity Weight Std.
Pack
in. mm lb. kg
97212 15-SI Stainless Steel Tubing & Conduit Cutter E-1525 3/16 -1
1/85.0 - 28.0 11/20.68 1
29963 35S Stainless Steel Tubing Cutter E-635 1/4-1
3/85.0 - 35.0 7/80.40 1
31803 65S Stainless Steel Quick-Acting Tubing Cutter E-635 1/4-2
5/86.0 - 65.0 11/20.68 1
29973 E635 Stainless Steel Cutter Wheel with Bearings E-635 - - 1/32 0.01 1
32078 151 CSST Quick-Acting CSST Cutter E-4546 3/8- 1 9.5 - 25.4 1.1 0.50 6
Internal Tubing Cutters
For trimming tubing below oor level for shower/oor drain installations, or above the ceiling for
sprinkler head installations.
• Model 106 features a tool steel and aluminum body while 108 and 109P have cast iron bodies.
• Each model features hardened steel rollers and cutter wheels.
• Model 109P is equipped to cut PVC or ABS plastic.
Catalog
No.
Model
No. Description Std.
Wheel
Capacity Depth Weight Std.
Pack
in. mm in. mm lb. kg
33005 106 Internal Cutter E-2558 2 - 3 50 - 75 1/4-2
5/86-67 2
3/81.1 1
83240 108 Internal Cutter E-2558 11/4-2 6-50 1/4-1
3/46-45 2 0.9 1
83290 109 2-Handle Internal Cutter E-2558 21/2-4 60-100 1/4-2
1/86-54 41.8 1
83295 109-P Above w/Wheel for Plastic E-5299 21/4-4 60-100 1/4-2
1/86-54 41.8 1
Model 15
Spare wheel
included in knob
X-CEL Knob = quicker cut
Tubing Cutters
PIPE/TUBE CUTTING & PREPARATION
3.18
Always use genuine RIDGID®Cutter Wheels. These wheels are precision-machined from high-grade
steel and are engineered for long life and maximum cutting accuracy.
Tubing Cutter Replacement Wheels
Tubing Cutters
(Original Product)
Catalog
No.
32910
32920
97212
29963
31803
32078
32930
32940
32945
32955
40617-86127
32975-32985-97787
33005
83240
83290
83295
31622
31632
31637
31642
31647
36597
36592
31652
31657
31662
31667
33055
93492
10973
Model
No.
10
15
15-SI
35S
65S
CSST
20
30
30P
40
101/118
103/104/117
106
108
109
109P
150
151
151-P
152
152-P
153
153-P
154
154-P
156
156-P
205
122
122XL
Cutter Wheels
Catalog
No.
Model
No.
Std.
Pack
Blade
Exp. Application/Material
33210 E-702 1.500 ▲▲ Heavy Wall PVC, ABS
33165 E-1240 12 .162 ▲▲▲ Steel – SS
33200 E-1740 1.147 ▲▲ ▲▲▲▲ Soft Flexible Pipe
74720 E-2155 1.286 ••• PE, PB, PP, Std. & Heavy Wall
74730 E-2156 1.412 ••
▲PE, PB, PP, Std. & Heavy Wall
74735 E-2157 1.500 ▲•PE, PB, PP, Std. & Heavy Wall
33175 E-2191 6 .292 ▲▲ ▲▲ •▲Steel Tubing
33170 E-2558 6 .220 •• ••
▲•• Aluminum & Copper
83235 E-2880 1.747 ▲▲ ▲ ▲ PE, PB, PP, Std. & Heavy Wall
33205 E-2990 1.112 ▲▲ ▲ Steel, Aluminum & Copper
33185 E-3469 12 .149 •• •• • • • Aluminum & Copper
34695 E-3495 1.290 ▲▲▲ ▲ Aluminum
33190 E-4546 6 .120 •▲▲▲ ▲ Steel – SS
33195 E-5272 6 .290 ▲▲ PVC, ABS, Std. Wall
33180 E-5299 6 .412 ▲▲▲
•▲▲ PVC, ABS, Std. Wall
33160 F-158 12 .149 •• • Aluminum & Copper
88260 E-10279 1.185 ▲▲ Thin-Wall PVC
96397 E-1525 1.120 •Stainless Steel
33551 122SS 1.292 ▲•Stainless Steel
29973 E-635 1.120 •• Stainless Steel
33190 E-4546 1.120 •Stainless Steel
•Denotes Cutter Wheels furnished with original product. ▲Denotes alternate Cutter Wheel.
3.19
PIPE/TUBE CUTTING & PREPARATION
Single Stroke Cutters
• For plastic (PVC, CPVC, PP, PEX, PE) and Multilayer tubing.
• Spring loaded handles for faster positioning. Single stroke, easy cut.
• PC-1250 features a reversible blade providing two times blade life. Is not suitable for
cutting multilayer tubing.
• PC-1375 ML: durable aluminum construction for heavy-duty use. Easy attachable ML-
adapter for improved multilayer cutting and instant re-rounding of tubing.
Catalog
No. Model No. Description
Capacity
(O.D.) Weight Std.
Pack
in. mm lb. kg
23488 PC-1250 Single Stroke Plastic Pipe & Tubing Cutter 1/8-1
5/83-42 1/20.20 1
26803 PCB-1250 PC-1250 Replacement Blade - - 1/80.06 1
23493 PC-1375 ML Single Stroke Plastic Pipe and Tubing
Cutter 1/8-1
3/8* 3 - 35* 3/40.34 3
25588 PCB-1375 PC-1375 Replacement Blade - - 1/80.06 1
*3-25 mm when used with ML-adapter
Ratchet Cutters with Ergonomic Grips
• Ergonomic grips on bottom handle are spaced at 1/2" increments to act as a quick pipe
measuring scale.
• X-CEL®quick-change blade.
• “Burr-less" cutting operation provides a square cut.
• Intended materials: Plastic (PVC, CPVC, PP, PEX, PE, Rubber hose) and Multilayer tubing.
Catalog
No.
Model
No. Description
Capacity
(O.D.) Weight Std.
Pack
in. mm lb. kg
23498 RC-1625 Ratchet Action Plastic Pipe & Tubing Cutter 1/8-1
5/83-42 13/16 0.52 1
27858 RCB-1625 RC-1625 Replacement Blade - - 1/80.03 1
30088 RC-2375 Ratchet Action Plastic Pipe & Tubing Cutter 1/8-2
3/83-63 17/80.90 1
30093 RCB-2375 RC-2375 Replacement Blade - - 1/40.10 1
Model PC-1375
Model PC-1250
When using the PC-1250 to cut Sch. 40 PVC, it is necessary to
rotate the cutter up and down at 90° while piercing through pipe.
Model RC-2375
Model RC-1625
Plastic Pipe Cutters
PIPE/TUBE CUTTING & PREPARATION
3.20
PTEC Plastic Drain Pipe Cutter
The RIDGID®PTEC Cutter is the rst cutter of its kind that provides the hassle-
free ability to execute a clean, fast, and straight cut on thin-wall plastic tube.
This versatile cutter can be used on Polyethylene (PE), Polypropylene (PP), and
Thin-Walled PVC tubes.
• Clean, Automatic Deburring – The cut produced by this cutter results in only
a ne strand of plastic, as opposed to the fuzz created around the cut of a
hacksaw. No need for a second tool to deburr, this cutter automatically deburrs
in parallel to cutting action.
• Automatic Beveling – Allows for immediate, easy joining to other sink drain
pieces.
• Open Bore Design – Allows cutting of double-anged plastic drain pipe.
• PTEC 3000 – Single-anged 11/4"; Double-anged 11/2".
• PTEC 5000 – Double-anged 50mm.
Catalog
No. Model No. Description
Capacity
(O.D.) Weight Std.
Pack
in. mm lb. kg
41608 PTEC 3000 Plastic Drain Pipe Cutter 11/4,11/2- 2.00 0.9 1
40868 PTEC 5000 Plastic Drain Pipe Cutter - 50 0.44 0.2 1
CLEAN
FAST
STRAIGHT
With
Hacksaw
With
Cutter
Plastic Pipe Cutters
3.21
PIPE/TUBE CUTTING & PREPARATION
Copper Cleaning Brushes
Inner-Outer Copper Cleaning Brush
• Combines tube O.D. cleaning and tting I.D. brush into one hand tool.
• High carbon steel brushes quickly clean ½" (12 mm) to ¾" (19 mm) nominal
tube and ttings in preparation for soldering or brazing.
• Durable plastic construction designed for easy brush replacement.
Catalog
No.
Model
No. Description Weight Std.
Pack
oz. g
34142 4100 I-O Copper Cleaning Brush 31/490.7 10
34147 Replacement Brush Set 11/245.3 1
Sizing Tools
No. 575 EMT Sizing Tool for Conduit
• Quickly resizes thin-wall conduit ends that have become deformed after
installation.
• Tool can also be used for slight bending of 1/2" and 3/4" conduit ends for
alignment purposes.
• Hardened alloy steel resists wear.
Catalog
No.
Model
No. Description Weight Std.
Pack
lb. kg
36005 575 1/2" (12 mm) and 3/4" (19mm) EMT 10.5 1
Foam Core Cutter
The RIDGID®Foam Core Cutter is the ONLY dedicated tool that cleanly cuts
(cellular) FOAM CORE ABS and FOAM CORE PVC pipe. Two size dedicated
cutters: 11/2" and 2".
• Fast – Make a complete cut in one single rotation.
• Easy to Use – Snap onto pipe, rotate.
• Clean – Cut is clean and doesn't require deburring.
• Extended Handle – Provides leverage for easy rotation.
• Extra Blade Included – Two blades are included in each unit.
Catalog
No.
Model
No. Description
Capacity
(O.D.) Weight Std.
Pack
in. lb. kg
41703 FC-150 Foam Core Cutter 11/20.225 0.125 3
40938 FC-200 Foam Core Cutter 2 0.364 0.165 3
41768 Replacement Blades-Pack of 4 - 0.011 0.005 3
Plastic Pipe Cutters
PIPE/TUBE CUTTING & PREPARATION
3.22
Reamers, Deburring Tools
127 Inner-Outer Reamer
• Handy for quick, clean and easy I.D. reaming and O.D. beveling of 1/4" (6 mm) to
11/2" (40 mm) tube.
• Plastic construction with long-wearing alloy steel blades.
• Gives fast, professional reaming on copper, aluminum, brass and other types of
tubing.
Catalog
No.
Model
No.
Capacity (O.D.) Weight Std. Pack
in. mm lb. kg
34965 127 1/4-1
1/26-40 1/40.113 1
43573 127S 1/8-1
1/23-40 3/80.163 1
127 for Copper, Aluminum, and Soft Steel
127S for Stainless Steel
223S/227S Inner-Outer Reamer
• 46 cutting edges on interior cone allow for fast, clean, inner reaming and outer
deburring/beveling of 1/4(6 mm) to 2" (50 mm) copper and stainless steel tubing.
• Hardened steel construction.
• Dual inch/metric measurement bar.
Catalog
No.
Model
No. Description Capacity Weight Std.
Pack
in. mm lb. kg
29983 223S Copper and Stainless Steel Tubing 1/4-1
1/46-40 3/40.34 1
29993 227S Copper and Stainless Steel Tubing 1/2-2 12-54 11/40.56 1
Deburring Tools
• Deburring Tool for plastic pipe and tubing.
• Made of high-grade steel with specially-designed, long-lasting cutting edges.
• Slip-resistant vinyl hand grip.
• Ideal for removing outside ridges and inside burrs on plastic pipe and tubing.
Catalog
No.
Model
No. Description
Plastic Pipe
Capacity Std.
Pack
in. mm
35155 72 Deburring Tool 1/2-1
1/212-40 6
64962 73 Deburring Tool 11/2-3 40-76 6
64967 74 Deburring Tool 4100 6
4.1
THREADING
Threading
• Dependable heavy duty machines for maximum up-time, superior quality threads and minimal
threading time.
• Industry’s widest selection of hand and power threading equipment.
• Manual “hammer” type chuck and “auto-chuck” models.
______________________________________________________________________
Type No. of
Models
Pipe
Capacity (in.) Page No.
Manual Ratchet Threaders
Exposed Ratchet Threader Sets 12 ½-2 4.3
Enclosed Ratchet Threader Sets 1½-1¼ 4.3
Ratchet and Handle Only 5–4.3
Three-way Pipe Threaders 5½-1 4.4
Exposed Ratchet Bolt Threader 2¼-1 4.4
Carrying Case 7–4.4
Hand Threader Die Heads –1⁄8- 12 4.5 - 4.6
Manual Threader Pipe & Bolt Dies –¼-2 4.7
Manual Receding Threaders
Models 65R-C & 65R-TC 6 1 - 2 4.8
Pipe Dies for Geared Receding Threaders 19 1-4 4.8
Power Threading w/ Geared Threaders ––4.9
Receding Geared Threader & Accessories ––4.10 - 4.11
Accessories
Thread Sealant 2– 4.11
Cutting Oil 12 – 4.12
Oiler 4 – 4.12
Power Drives
Model 600-I 21⁄8- 1¼ 4.13
Model 690-I 21⁄8- 2 4.14
Model 700 21⁄8- 2 4.15
Model 300 3 1⁄8- 2 4.16
Threading Machines
Model 300 Complete 41⁄8- 2 4.17
Model 535A Threading Machine 3 1⁄8- 2 4.18 - 4.19
Model 535 Threading Machine 41⁄8- 2 4.20 - 4.21
Model 1215 Threading Machine 1¼ - 1½ 4.22
Model 300 Compact Threading
Machine
61⁄8- 2 4.23
Threader Stands 5–4.24
Optional Die Heads 12 1⁄8- 2 4.25
Model 1224 Threading Machine 7¼ - 4 4.26
Stands & Die Heads for 1224 –¼ - 4 4.27
Pipe Dies for Machine Die Heads –1⁄8- 2 4.28 - 4.30
Nipple Chucks/Adapters ––4.31
THREADING
4.2
See page 4.12
Threader Selection
Pipe Threads (inches) Bolt Threads Model Page No.
NPT BSPT NPSM BSPP UNF UNC ACME
1⁄8-1
1⁄8-11⁄4
1⁄8-2
1⁄2-1
1⁄8-1
1⁄8-11⁄4
1⁄8-2
1⁄2-1
1⁄8-1
1⁄8-11⁄4
1⁄2-2
1⁄2-1
–
3⁄8-1
1⁄4-2
1⁄2-1
1⁄4-1
–
–
–
1⁄4-1
–
–
–
–
–
–
–
Manual
Ratchet
Threaders
00-RB
11-R
12-R
31-A
Series*
4.4
4.3
4.3
4.3
1-2
2½-4
4-6
1-2
2½-4
4-6
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Receding
Threaders
65-R
141
161
4.8
4.10
4.10
1⁄8-11⁄4
1⁄8-2
1⁄8-2
1⁄8-2
1⁄8-11⁄4
1⁄8-2
1⁄8-2
1⁄8-2
1⁄8-11⁄4
1⁄2-2
1⁄8-2
1⁄8-2
3⁄8-1
1⁄4-2
1⁄4-2
¼-2
–
–
1⁄4-1
¼-2
–
–
1⁄4-1
¼-2
–
–
–
¾-13⁄8
Power Drives
600-I
690-I
700
300
4.13
4.14
4.15
4.16
1⁄8-2
1⁄8-2
1⁄8-2
1⁄8-2
¼-4
1⁄8-2
1⁄8-2
1⁄8-2
1⁄8-2
¼-4
1⁄8-2
1⁄8-2
1⁄8-2
1⁄8-2
1⁄8-2
¼-2
¼-2
¼-2
¼-2
¼-2
¼-2
5⁄16-2
¼-2
¼-2
¼-2
¼-2
5⁄16-2
¼-2
¼-2
¼-2
¾-13⁄8
5⁄16-2
¾-13⁄8
¾-13⁄8
¾-13⁄8
Threading
Machines
300 Compact
535-A
535
1215
1224
4.24
4.18
4.20
4.22
4.28
*Standard configuration but can use any 12-R dies.
4.3
THREADING
See page 4.12
Manual Ratchet Threaders
All matched Threader/Sets include Die Heads, Ratchet Assembly, Ratchet Handle and
Alloy Dies. All Threader Sets use same 12-R Dies in Die Head.
Exposed Ratchet Threader Sets
• Model 00-R: Capacity 1/8" - 1" without carrying case.
• Model 12-R: Capacity 1/8" - 2" with carrying case.
Catalog No. Model No. Description Die Heads Include Weight
in. mm lb. kg
36345 00-R NPT 1/2-1 12-25 10 4.5
36355 00-R NPT 3/8-1 10-25 111/45.1
36375 00-R NPT 1/8-1 3-25 13
3/46.2
36480 12-R NPT 1/2-1
1/412-32 23
3/410.8
36475 12-R NPT 1/2-2 12-50 34
3/415.8
36505 12-R NPT 1/8-2 3-50 451/220.7
55207 12-R* NPT 1/2-2 12-50 35
1/216.1
36380 00-R NPSM 1/2-1 12-25 10 4.5
36510 12-R NPSM 1/2-2 12-50 343/415.8
65175 00-R BSPT 1/2-1 12-25 10 4.5
65255 12-R BSPT 1/2-2 3-50 343/415.8
65285 12-R BSPT 1/8-2 3-50 451/220.7
*For plastic-coated pipe
Enclosed Ratchet Threader Sets
• No 11-R capactiy: 1/8"-1
1/4".
Catalog No. Model No. Description
Die Heads
Include Weight
in. mm lb. kg
36390 11-R NPT 1/2-1
1/412 - 32 16 7.3
Ratchet & Handle Only
• Ratchet knob indicates forward and reverse.
• Die heads snap in from both sides and lock in place.
Catalog No. Model No. Description
38540 00-RB & 00-R Ratchet & Handle Only
37777 11-R Ratchet & Handle Only
38550 111-R Ratchet & Handle Only
30118 12-R Ratchet & Handle Only
38535 0-R Ratchet & Handle Only
Model 11-R
THREADING
4.4
See page 4.12
Manual Ratchet Threaders
Three-Way Pipe Threaders
Each model cuts three thread sizes and uses 12-R ratchet threader dies.
Catalog
No.
Model
No.
Capacity Dies Used Weight
in. mm lb. kg
36540 31-A NPT 1/2- 1 12 - 25 RH Alloy - NPT 10 4.6
36550 31-A NPT 1/2- 1 12 - 25 RH High Speed - NPT 10 4.6
36555 31-A NPT 1/2-1 12-25 RH High Speed For Stainless
Steel - NPT 10 4.6
65320 31-A BSPT 1/2- 1 12 - 25 RH Alloy BSPT 10 4.6
36560 31-A NPSM 1/2- 1 12 - 25 RH Alloy - NPSM 10 4.6
Exposed Ratchet Bolt Threader Sets
• No. 00-RB: Capacity 1/4"-1"
• All matched threader sets include button die heads, ratchet assembly (00-R) and ratchet
handle. Button dies can be reversed to thread close to bolt shoulder or head.
Catalog
No.
Model
No. Description
No. Die
Heads
Complete
Thread
Type
Capacity
Range Weight
in. mm lb. kg
36680 00-RB Ratchet Bolt Threader 10 UNC 1/4-1 6-25 20 9.1
36690 00-RB Ratchet Bolt Threader 10 UNF 1/4-1 6-25 20 9.1
Carrying Cases
• Helps keep die sets organized.
Catalog
No. Description Threader
Type
Length Width Height Weight
in. mm in. mm in. mm lb. kg
38605 Metal Case 00-R 195/8497 49/16 116 33/16 81 71/23.40
38610 Metal Case 00-RB 191/8485 71/4184 33/16 81 71/23.40
38615 Metal Case 111-R 255/8650 4 21/32 118 67/32 158 73/43.51
38620 Metal Case 11-R 241/8612 4 21/32 118 911/16 246 73/43.51
38625 Metal Case (Holds 6
Die Heads) 12-R 257/8657 5 127 61/2165 13 5.90
97375 Metal Case (Holds 9
Die Heads) 12-R 243/8619 5 127 10 254 15 6.80
21218 Plastic Case 11R/12R 25 635 5 127 14 355 6 2.72
Note: Cases contain no die heads
4.5
THREADING
See page 4.12
Catalog No.
Nominal Pipe Size (in.)
1⁄81⁄43⁄81⁄23⁄411
1⁄411⁄22
Model No. OO-R
(NPT)
Alloy RH 36875 36880 36885 36890 36895 36900 –––
High-Speed RH 36935 36940 36945 36950 36955 36960 –––
High-Speed for Stainless Steel RH 36965 36970 36975 36980 36985 36990 –––
(NPSM)
Alloy RH 36995 37000 37005 37010 37015 37020 –––
API High-Speed ––83435 68775 68780 ––––
Model No. 12-R
(NPT)
Alloy RH 37375 37380 37385 37390 37395 37400 37405 37410 37415
High-Speed LH –––37435 37440 37445 37450 37455 37460
High-Speed RH 37465 37470 37475 37480 37485 37490 37495 37500 37505
High-Speed for Stainless Steel RH 37510 37515 37520 37525 37530 37535 37540 37545 37550
High-Speed for PVC RH –83450 83455 83460 83465 83470 83475 83480 83485
High-Speed for Plastic Coated Pipe – – – 51857 51862 51867 51872 51877 51882
Alloy for IMC RH – ––92690 92695 92700 92705 92710 92715
(NPSM)
Alloy RH 37555 37560 37565 37570 37575 37580 37585 37590 37595
Model No. 11-R
(NPT)
Alloy RH 37025 37030 37035 37040 37045 37050 37055 20923 20943
High-Speed RH 37095 37100 37105 37110 37115 37120 37125 20928 20948
High-Speed for Stainless Steel RH 37130 37135 37140 37145 37150 37155 37160 20933 20953
(NPSM)
Alloy RH 37165 37170 37175 37180 37185 37190 37195 20938 20958
Model No. OO-RB 1⁄4
20 TPI
5⁄16
18 TPI
3⁄8
16 TPI
7⁄16
14 TPI
1⁄2
13 TPI
9⁄16
12 TPI
5⁄8
11 TPI
3⁄4
10 TPI
7⁄8
9 TPI
1
8 TPI
(UNC)
Alloy RH 37610 37615 37620 37625 37630 37635 37640 37645 37650 37655
Alloy LH –––37675 –––37695 ––
(UNF) 28 TPI 24 TPI 24 TPI 20 TPI 20 TPI 18 TPI 18 TPI 16 TPI 14 TPI 14 TPI
Alloy RH 37710 37715 37720 37725 37730 37735 37740 37745 –37755
Alloy LH –––37775 37780 37785 37790 37795 37800 37805
Die Heads
Models OO-R, 12-R, 11-R & OO-RB
Selection: North American Standards
Unless highlighted, all die heads come complete with selected dies and are set at the factory.
nHighlighted die heads require assembly with supplied dies.
All matched threader/sets include die heads, ratchet assembly, ratchet handle and specified dies.
nNot for manual hand threading.
THREADING
4.6
See page 4.12
Die Heads
Ratchet Threaders – Models 00-R, 12-R, 11-R
Selection: British & International Standards
Catalog No.
Nominal Pipe Size (mm)
20 mm 25 mm 32 mm 40mm
Model No. 11-R
(ISO) Alloy RH 75005 75010 75015 75020
Selection: British & International Standards
Unless highlighted, all die heads come complete with selected dies and are set at the factory.
nHighlighted die heads require assembly with supplied dies.
All matched threader/sets include die heads, ratchet assembly, ratchet handle and specified dies.
Catalog No.
Nominal Pipe Size (in.)
1⁄81⁄43⁄81⁄23⁄411
1⁄411⁄22
Model No. OO-R
(BSPT)
Alloy RH 65705 65710 65715 65720 65725 65730 –––
High-Speed RH 65765 65770 65775 65780 65785 65790 –––
Model No. 12-R
(BSPT)
Alloy RH 65950 65955 65960 65965 65970 65975 65980 65985 65990
High-Speed LH –––––66020 –66030 66035
High-Speed RH –––66040 66045 66050 66055 66060 66065
Alloy for JIS RH – – – 92585 92590 92595 92600 92605 92610
(BSPP)
Alloy RH –49932 49937 49942 49947 49952 – 49962 49967
Model No. 11-R
(BSPT)
Alloy RH 65550 65555 65560 65565 65570 65575 65580 ––
High-Speed RH ––65620 65625 65630 65635 65640 ––
(BSPP)
Alloy RH ––65680 65685 65690 65695 65700 ––
4.7
THREADING
See page 4.12
Die Material or Type Catalog No.
Nominal Pipe Size – Threads Per Inch
1⁄8-27 1⁄4-18 3⁄8-18 1⁄2-14 3⁄4-14 1-11½11⁄4-11½11⁄2-11½2-11½
(NPT) National Pipe Taper
Alloy RH 37810 37815 37820 37825 37830 37835 37840 37845 37850
High-Speed RH 37855 37860 37865 37870 37875 37880 37885 37890 37895
High-Speed LH –38050 38055 38060 38065 38070 38075 38080 38085
H.S. For Stainless Steel RH 37900 37905 37910 37915 37920 37925 37930 37935 37940
H.S. For PVC RH ––70685 70690 70695 70700 70705 70710 70715
HS Reversible RH* –––49707 49712 49717 49722 49727 –
(NPSM) National Pipe Straight Mechanical
Alloy RH 37945 37950 37955 37960 37965 37970 37975 37980 37985
(API) American Petroleum Institute***
High-Speed RH 70720 70725 70730
(BSPT) British Standard Pipe Taper**
1⁄8-28 1⁄4-19 3⁄8-19 1⁄2-14 3⁄4-14 1-11 11⁄4-11 11⁄2-11 2-11
Alloy RH 45848 45853 45858 45863 45868 45873 45878 45883 45888
High-Speed RH 66310 66315 66320 66325 66330 66335 66340 66345 66350
High-Speed LH 66405 66410 66415 66420 66425 66430 66435 –66445
HS Reversible RH* ––56337 56342 56347 56352 ––56367
(BSPP) British Standard Pipe Parallel**
Alloy RH 66190 66195 66200 66205 66210 66215 66220 66225 66230
* Dies can be reversed in die head for close-to-wall threading.
** Requires British Die Head.
*** Requires API Die Head.
Pipe Dies
Selection: Models OO-R, 11-R, 12-R, O-R,
Ratchet Threaders or 30A, 31A 3-Way Pipe Threaders
ISO
International Standards Organization
Nominal Conduit Size in mm – Thread Pitch in mm
20-1.5 25-1.5 32-1.5 40-1.5
Alloy RH 85830 76305 85835 76315
Requires 11-R ISO Die Head, see page 4.6.
BEC
British Electrical Conduit (1)
Nominal Conduit Size – Threads Per Inch
1⁄2-18 5⁄8-18 3⁄4-16 1-16 11⁄4-16 11⁄2-14
Alloy RH 66155 66160 --
66175 –
(1) Requires 11-R BEC Die Head.
Bolt Threaders Button Dies
Selection: Model OO-RB Ratchet Bolt Threaders,
or 31B, 33B, 35B, 37B 3-Way Bolt Threaders
Die Material or Type Catalog No.
Rod Diameter – Threads Per Inch
(UNC) Unified National Course 1⁄4-20 5⁄16-18 3⁄8-16 7⁄16-14 1⁄2-13 9⁄16-12 5⁄8-11 3⁄4-10 7⁄8-9 1-8
Alloy RH 38335 38340 38345 38350 38355 38360 38365 38370 38375 38380
(UNF) Unified National Fine 1⁄4-28 5⁄16-24 3⁄8-24 7⁄16-20 1⁄2-20 9⁄16-18 5⁄8-18 3⁄4-16 7⁄8-14 1-12
Alloy RH 38385 38390 38395 38400 38405 38410 38415 38420 38425 15317
THREADING
4.8
See page 4.12
Manual Receding Threaders
No. 65R-TC Manual Receding Threader
• Threads 1"-2" pipe.
• True centering workholder.
• Jam-proof.
• Right-hand only.
Catalog
No. Model No. Description
Capacity/Pipe
Size Weight
in. mm lb. kg
36570 65R-TC NPT with 1 Set High-Speed Dies 1 - 2 25 - 50 27 12.3
65345 65R-TC BSPT with 1 Set High-Speed Dies 1 - 2 25 - 50 27 12.3
96720 -Metal Carrying Case for 65R Series
Threaders --83.7
No. 65R-C Manual Receding Threader
• Threads 1"-2" pipe.
• Jam-proof drive pawl.
• Cam workholder sets instantly.
• Right-hand only.
Catalog
No. Model No. Description
Capacity/
Pipe Size Weight
in. mm lb. kg
36565 65R-C NPT with 1 Set High-Speed Dies 1 - 2 25 - 50 25 11.4
65340 65R-C BSPT with 1 Set High-Speed Dies 1 - 2 25 - 50 25 11.4
96720 -Metal Carrying Case for 65R Series Threaders - - 83.7
Accessories: Pipe Dies for
Model 4PJ Geared Pipe Threaders
Accessories: Receding Threaders
Pipe Dies for Models 65R-C & 65R-TC
Ratchet Threaders
Die Material or Type
Catalog No.
(NPT) National Pipe Taper (BSPT) British Std. Pipe Taper
1" Thru 2"-111/2TPI 1" Thru 2"-11 TPI
High-Speed RH 38100 66450*
H.S. For Stainless Steel RH 38105 –
H.S. For Cast Iron RH 38110 –
Die Material or Type
Catalog No.
(NPT) National Pipe Taper
Nominal Pipe Size-Threads Per Inch
(NPSM) National Pipe*
Nominal Pipe Size-Threads Per Inch
21/2"-8 3"-8 31/2"-8 4"-8 21/2"-8 3"-8 31/2"-8 4"-8
High-Speed RH 38220 38225 38230 38235 46732 46737 46742 46747
H.S. For Cast Iron RH 38240 38245 38250 38255 ––––
Die Material or Type
Catalog No.
(BSPT) British Standard Pipe Taper
Nominal Pipe Size-Threads Per Inch
21/2"-11 3"-11 31/2"-11 4"-11
High-Speed RH 66535* 66540* –66550*
* Requires BSPT Threader
* Requires BSPT Threader
* Requires NPSM Threader
4.9
THREADING
See page 4.12
Geared Threader Configurations
300 Power Drive Front-Mount
Application for 141 and 161 Geared
Threader requires:
• 1206 Stand (pg. 4.24).
• Pipe Support (pg. 2.5).
• 418 Oiler (pg. 4.12).
• 844 Drive Bar (pg. 4.10).
• 758 Loop – for 141 (pg. 4.10).
• 346 Support Arms – for 161 (pg. 4.10).
300 Power Drive Rear-Mount
Application for 141 and 161 Geared
Threader requires:
• 1206 Stand (pg. 4.24).
• 460 TRISTAND (pg. 2.2).
• 418 Oiler (pg. 4.12).
• 840A Universal Drive Shaft (pg. 4.10).
535 Threading Machine
Front-Mount
pg. 4.18.
535 Threading Machine
Rear-Mount (manual chuck only)
Application for 141 and 161 Geared
Threader requires:
• 460 TRISTAND (pg. 2.2).
• 418 Oiler (pg. 4.12).
• 840A Universal Drive Shaft (pg. 4.10).
300 Compact Threading
Machine Front-Mount
Application for 141 Geared Threader
requires:
• 844 Drive Bar (pg. 4.10).
• 768 Drive Link Assembly (pg. 4.10).
1822 Threading Machine
Front-Mount
Application for 141 Geared Threader
requires:
• 241 Carriage Mount Kit.
1224 Threading Machine
Rear-Mount
Application for 161 Geared Threader
requires:
• 840A Universal Drive Shaft (pg.4.10).
• 460 TRISTAND (pg. 2.2).
• 418 Oiler (pg. 4.12).
300 Front-Mount
Power Threading with Geared Threaders – Models 141, 161
535 Rear-Mount
THREADING
4.10
See page 4.12
Receding Geared Threaders
Models 141/161
• Jaw clutch prevents jamming.
• Simple adjustment for tapered or straight threads.
• Cam-type workholder sets instantly.
• Fully enclosed gearing.
• Right-hand only.
Specifications
• Model 141 threads 2½", 3", 3½", 4" pipe with one set of dies.
• Model 161 threads 4", 4½", 5", 6" pipe with one set of dies.
Catalog
No.
Model
No. Description
Capacity Nominal
Pipe Size Weight
in. mm lb. kg
36620 141 NPT with 1 Set High-Speed Dies 21/2- 4 62 - 100 93 42.3
65380 141 4" Geared Threader BSPT 21/2- 4 62 - 100 93 42.3
36630 161 NPT with 1 Set High-Speed Dies 4 - 6 100 - 150 158 71.8
39380 D-1440 Ratchet and Handle - - 91/24.3
96725 -Metal Carrying Case for 141 Geared Threaders - - 17 7.7
Geared Threader Accessories
Model 840A Universal Drive Shaft
A telescoping (41" to 50") drive shaft for operation of Nos. 141 and 161 geared
threaders with threading machines.
Geared Threader Operation
The Nos. 141 and 161 geared threaders, in conjunction with these accessories, allow
power drives and threading machines to thread up to 4" and 6" pipe. See page 4.9.
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
42505 46 Adjustable Pipe Support 23 10.4
61122 840A Universal Drive Shaft 31 14.1
19366 758 Loop 11/40.6
40005 346 Support Arms 101/24.8
42405 844 Drive Bar for 141 53/42.6
42415 768 Drive Link Assembly for 141 21/21.1
97882* 535A Kit 141 on 535 Auto Chuck with High-Clearance Carriage 12 5.4
16723** - Drive Link Assembly for High Clearance Carriage 12 5.5
*Kits include all accessories necessary for threading with a 141 mounted on a 535 with a high-clearance
carriage ;1⁄2
**Drive bar for 16723 not included
4.11
THREADING
See page 4.12
Pipe Dies
Model 141 Geared Pipe Threader Dies
Catalog
No. Description Thread Type Pipe Threading Capacity
in. TPI
38120 High-Speed RH NPT 21/2-4 8
38125 H.S. For Cast Iron RH NPT 21/2-4 8
38130 H.S. For PVC RH NPT 21/2-4 8
70640 H.S. for Stainless Steel RH NPT 21/2-4 8
66625* High-Speed RH BSPT 21/2-4 11
70645* H.S. for Stainless Steel RH BSPT 21/2-4 11
38140 H.S. 371/2" Bevel Bevel 21/2-4 4
(NPSM) National Pipe Straight Mechanical – Use (NPT) Dies and Rotate Threader Guide Post 180°.
(BSPP) British Standard Pipe Parallel – Use (BSPT) Dies and Rotate Threader Guide Post 180°.
* Requires BSPT Threader.
Model 161 Geared Pipe Threader Dies
Catalog
No. Description Thread Type Pipe Threading Capacity
in. TPI
38155 High-Speed RH NPT 4 - 6 8
70655 H.S. For Stainless Steel RH NPT 4 - 6 8
66620* High-Speed RH BSPT 4 - 6 11
(NPSM) National Pipe Straight Mechanical – Use (NPT) Dies and Rotate Threader Guide Post 180°.
(BSPP) British Standard Pipe Parallel – Use (BSPT) Dies and Rotate Threader Guide Post 180°.
* Requires BSPT Threader.
Threading Accessories
RIDGID Thread Sealants
• RIDGID White proprietary formula sealant is NFS and UPC listed and approved for
portable water use. The non-toxic, lead-free formulas won’t harden or freeze, allowing
easy disassembly of joints without compromising thread integrity.
• RIDGID White Sealant with ultra-ne non-stick particles allow for a tighter seal with
less effort. The formula is not affected by oils, dilute acids or common solvents and
can be used on PVC, CPVC, ABS, nylon, polypropylene, polybutylene, delrin, cycolac,
as well as on metal pipes. RIDGID White Sealant should not be used on lines carrying
oxygen, halogens or liquid sodium.
White (with non-stick particles)
Catalog
No. Description Weight Per Case
lb. kg
84332 1/2pint can (brush-in-can) 11 5.00
84337 1 pint can (brush-in-can) 26 11.75
Note: Working pressure for all RIDGID sealants is 125 p.s.i.
Pipe Dies
THREADING
4.12
See page 4.12
Threading Accessories
Thread Cutting Oil
RIDGID®thread cutting oils are free of chlorine and other halogens, PCBs and heavy metals.
Complete material safety data sheet available.
• Cools threads and pipe during operation.
• Speeds metal removal.
• Improves thread quality.
• Reduces threading torque.
Feature Dark Nu-Clear Endura-Clear Extreme
Performance
Low Odor XX X X
Anti-Mist Formulation XX X
Extended Die Life XX
FBC™System Compatible** X
Designed for Stainless Steel X
Working Viscosity 0°F -20° -20° 0°
Catalog
No. Description Container Size Containers
Per Case
Weight Per
Case
gal l lb. kg
41590 Dark 0.2 0.9 12 22 10
70830 Dark 1.0 3.8 6 50 23
41600 Dark 5.0 18.9 14214
41610 Dark 55.0 207.9 1465 221
70835 Nu-Clear 1.0 3.8 6 50 23
41575 Nu-Clear 5.0 18.9 14219
41585 Nu-Clear 55.0 207.9 1465 211
32808 Endura-Clear 1.0 3.8 6 50 23
74012 Extreme Performance 1.0 3.8 6 50 23
74047 Extreme Performance 5.0 18.9 14219
76767 Extreme Performance 55.0 207.9 1465 211
22088 Extreme Performance Aerosol 0.1 0.4 12 12 6
Model 418 Oiler
The Model 418’s durable pump assembly and heavy-duty reservoir are designed to increase
productivity.
• Pump Assembly – 50% more oil per stroke than other hand-held oilers for longer die life.
• An ergonomic 2-nger trigger design that reduces user fatigue.
• Die cast, heavy-duty body with swivel nozzle with no exposed parts for longer life.
• Heavy Duty Reservoir – The 418 oiler features a patent pending fastenerless twist and lock
drip pan that easily locks in place.
• The material withstands abrasion, is lighter than metal and does not rust.
• The reservoir will not crack or leak.
• Material is so strong that under normal use, no dents will form on impact or shape changes
will occur over time. As a result, the drip pan will t squarely on the reservoir time after
time.
• Integral molded body eliminates leaks at the hose-reservoir connection.
• Convenient anti-slip grib design with integral hood for easy hanging.
Catalog
No.
Model
No. Description Weight
lb. kg
10883 418 Oiler w/1 Gal. Premium Thread Cutting Oil 201/29.4
72342 402 Hand operated oiler with attachment for 1 gallon and 5 gallon
containers and 54" hose. 21/21.2
72332 #4 Hand-operated oiler only 11/40.5
72327 #4 Hand-operated oiler with 54" and hose ttings 21/41.0
Specifications
• Chip pan diameter – 141/4" (362 mm).
• Chip pan depth – 83/8" (212 mm).
• Hose length – 55" (1.4 m).
• Capacity – 1 gallon.
4.13
THREADING
See page 4.12
Hand-Held Power Drives
Catalog
No.
Model
No. Description Weight
lb. kg
44913 600-I Power Drive (Only) Case, & Support Arm 29.1 13.2
44918 600-I Power Drive w/ 1/2"–1
1/4"NPT 11R Die Heads, Case & Support Arm 41.0 18.6
Model 600-I Power Drive
• Lightweight and easy to handle for service and repair.
• Over molded handle and contoured grip provide optimal control.
• Screw-in brush covers reduces service time.
• Durable die cast gear housing and berglass reinforced plastic body to withstand demanding
jobsite conditions.
• Dual "V” Jaw Reaction Arm rmly prevents slipping.
Specifications
• Capacity – 1/8"–1
1/4" (3 mm - 32 mm), 11R die heads.
• Weight – 12.7 lbs. (5.8 kg), power drive only.
• Size – 20 in. (508 mm) L x 3.75 in. (95mm) W x 7.5 in. (191mm) H.
• Motor Type – universal single phase.
• Motor Wattage – 1020W (230V), 1270W (115V).
• Available Voltages/Phases – 115V/1 Ph, 230V/1Ph, 220V/1 Ph.
• Amps – 12 A (115V), 5 A (230V, 220V).
• Operating Speed (No Load) – 32 RPM (115V), 36 RPM (230V).
• Controls – FORWARD/REVERSE slide wwitch, ON/OFF two-step momentary contact.
• Gear Head – die cast aluminum permanently greased.
• Body & Handle – durable heavy-duty berglass reinforced plastic.
Standard Equipment
• Carrying case.
• 602 support arm.
•1/2", 3/4", 1, 1 1/4" 11-R die heads (kit only).
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
45923 602 602 Support Arm 4.0 1.8
46668 –Carrying Case 12.0 5.5
10883 418 Oiler w/1 Gal. Premium Thread Cutting Oil 17.0 7.7
16703 425 Portable TRISTAND Vise 32.0 14.5
36273 460 Portable TRISTAND Vise 47.0 21.0
THREADING
4.14
See page 4.12
Hand-Held Power Drives
Catalog
No.
Model
No. Description Weight
lb. kg
44923 690-I Power Drive 1/2" - 2" NPT Die Heads, Case, & Support Arm 42.4 19.2
44928 690-I Power Drive Only W/ Case and Support Arm 59.4 26.9
Model 690-I Power Drive
• RIDGID Die Head Retaining System is a simple twist and release for the 1½", 2" Die Heads
and Die Head Adapter
• Lightweight and portable for maintenance, repair and service plumbers
• Over molded handle and contoured grip provide optimal control
• Screw in brush covers improve serviceability
• Durable die cast gear housing and berglass reinforced plastic body to withstand
demanding job site conditions
• Dual "V” Jaw Reaction Arm rmly prevents slipping
Specifications
• Capacity – 1/8" – 2" (3 mm – 50 mm), 11R die heads.
• Weight – 21.1 lbs. (9.59 kg), power drive only
• Size – 24.1 in. (613 mm) L x 4.75 in (121 mm)Wx8in.(203 mm)
• Motor Type – universal single phase
• Motor Wattage – 1020W (230V), 1270W (115V)
• Available Voltages/Phases – 115V/1 Ph, 230V/1Ph, 220V/1 Ph
• Amps – 12 A (115V), 5 A (230V, 220V)
• Operating Speed (No Load) – 23 RPM (115V), 37 RPM (230V)
• Controls – FORWARD/REVERSE slide switch, ON/OFF two-step momentary contact
• Gear Head – die cast aluminum permanently greased
• Body & Handle – durable heavy-duty berglass reinforced plastic
Standard Equipment
• 46673 carrying case.
• 692 support arm.
• 39181 ratcheting ring
•1/2", 3/4", 1, 11/4", 11/2", 2 11-R die heads (kit only).
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
45928 692 692 Support Arm 4.0 1.8
46673 –Carrying Case 12.0 5.5
39187 –Ratcheting Ring ––
10883 418 Oiler w/1 Gal. Premium Thread Cutting Oil 17.0 7.7
16703 425 Portable TRISTAND®Vise 32.0 14.5
36273 460-6 Portable TRISTAND Vise 47.0 21.0
4.15
THREADING
See page 4.12
Hand-Held Power Drives
Model 700 Power Drive
• Heavy-duty hand-held power drive
• Designed for RIDGID No. 12-R die heads. Other RIDGID die heads (OO-R, OO-RB, 11-R)
using adapters. Also used with 258/258XL pipe cutters
Specifications
• Capacity – 1/8" - 2" Pipe (6 - 50 mm). 1/4"- 1" (8 - 25 mm) Bolt (using 00-RB Die Heads).
• Spindle Speed – 26 - 30 RPM (no load).
• Weight – 25 lbs. (11 kg) Power Drive Only
• Length – 281/4" (71.7 cm).
• Output Power – 1/2HP
• Motor – Universal, 1100 W, 115V or 230V 50/60 Hz.
• Switch – Double-throw reversible.
• Gear Head – Spur gear reduction face gear drive. Spring-loaded adapter pawls. Hardened
steel spindle gear.
• Body – Cast aluminum.
• Die Heads – 12-R. Other Die Heads with adaptors: 00-R, 00-RB, 11-R.
Catalog
No.
Model
No. Description Voltage Frequency Thread Type Weight
V Hz lb. kg
41935 700 700 Power Drive 115 50 - 60 - 25.0 11.0
41940 700 700 Power Drive 230 50 - 60 - 25.0 11.0
45178 700
700 Power Drive
Complete 115 Kit
1/2" -2" 12R Die Heads
115 50 - 60 NPT - -
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
10883 418 Oiler w/1 Gal. Premium Thread Cutting Oil 20.5 9.4
42600 770 Adapter for 00-R and 00-RB 4.4 2.0
42605 771 Adapter for 0-R 4.4 2.0
42610 772 Adapter for 11-R 4.4 2.0
42615 773 Adapter for 111-R 2.2 1.0
42620 774 Square Drive Adapter -15/16"4.4 2.0
42625 775 Support Arm for No. 700 11.0 5.0
42950 B-171-X Metal Carrying Case 28.8 13.0
THREADING
4.16
See page 4.12
Power Threading Machines
Model 300 Power Drive
• RIDGID speed chuck.
• Reversible 1/2HP universal motor.
• Recessed On/Off/Reverse switch.
• Convert a 300 Power Drive to a portable threading machine.
• Ideal for use with RIDGID roll groovers
Specifications
• Capacity – 1/8" - 2" (6mm - 50mm) Pipe, 21/2" - 4" (65mm - 100mm) with 141, and 4" - 6" (100mm-150mm) with 161
Geared Threaders, 1/4" - 2" (6mm - 52mm) Rod.
• Motor – 1/2HP, universal, reversible motor, single-phase, 50/60 Hz, 115V.
• Switch – Heavy-duty FOR/OFF/REV and Integral Foot Switch.
• Chuck – RIDGID speed chuck with replaceable rocker-action jaws.
• Spindle Speed – 38 RPM (57 RPM available).
• Rear Centering Device – Cam-action turns with chuck.
• Support Bar – Heavy-duty (2).
Catalog
No. Model No. Description Spindle
Speed
Pipe
Threading
Capacity
Rod
Threading
Capacity
Max.
Geared
Threader
Capacity
Weight
in. mm in. mm in. mm lb. kg
41855 300 Only 300 Power Drive, 115V 50/60Hz 38 RPM 1/8-2 3-50 1/4-2 6-50 6 150 94 43.00
41860 300 Only 230V, 50/60 Hz 38 RPM 1/8-2 3-50 1/4-1
1/26-40 6 150 94 43.00
75075 300 Only 300 Power Drive, 115V 50/60Hz 57 RPM 1/8-1
1/43-31 1/4-1
1/26-50 6 150 94 43.00
75435 300 Only 230V, 50/60 Hz Export 38 RPM 1/8-2 3-50 1/4-2 6-50 6 150 94 43.00
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
10883 418 Oiler w/1 Gal. Premium Thread Cutting Oil 201/29.40
51005 819 Nipple Chuck Complete, 1/2" - 2" NPT 101/24.80
97065 811A 811A 1/8" - 2" NPT, Quick Opening, RH 13 5.90
97075 815A 815A 1/8" - 2" NPT Die Head, Self-Opening, RH 13 5.90
42360 1206 1206 Stand 31 14.10
42365 341 Reamer 63/43.10
42370 360 Model 360 1/8"-2" Full Floating, Self Centering Cutter 81/23.90
42385 312 Carriage Feed Lever 3 1.40
42575 32 #32 Transporter (for Power Drives and Tristand Vises) 141/46.50
46660 E-863 LH/RH Reamer Cone 73.20
68815 311 Carriage with No. 312 Lever 15 6.80
97365 - Jaw Inserts for Coated Pipe 1/20.20
22638 1452 Clip-On Tool Tray 6 2.70
68160 819 Nipple Chuck 1/2"-2" BSPT 101/24.80
97070 811A BSPT Die Head Quick-Open R.H. 121/25.70
97080 815A 815A 1/8"-2" BSPT Self-Opening Die Head 13 5.90
4.17
THREADING
See page 4.12
Power Threading Machines
Model 300 Power Drive Complete
• RIDGID Speed Chuck.
• Reversible 1/2HP Universal Motor.
• Recessed On/Off/Reverse Switch.
• Ideal For Use With RIDGID Roll Groovers.
Specifications
• Motor – 1/2HP Single Phase, Universal.
• Switch – Heavy-duty For/Off/Rev and Integral Foot Switch.
• Chuck – Speed Chuck with Replaceable Rocker-Action Jaws.
• Spindle Speed – 38 RPM (57 RPM Avaible).
• Rear Centering Device – Cam-Action Turns With Chuck.
• Support Bar – Heavy-Duty.
Standard Equipment.
• 97065 – 811A 1/8" - 2" NPT, Quick Opening, RH.
• 47745 – 1/2"-3/4" Universal Alloy Die Set.
• 47750 – 1" - 2" Universal Alloy Die Set.
• 42370 – Model 360 1/8"-2" Full Floating, Self Centering Cutter.
• 68815 – Carriage with No. 312 Lever.
• 42575 – #32 Transporter (for Power Drives and Tristand Vises).
• 42365 – Reamer.
• 42360 – 1206 Stand.
• 10883 – Oiler w/1 Gal. Premium Thread Cutting Oil.
• 22638 – Clip-On Tool Tray.
• 41855 – 300 Power Drive, 115V 50/60Hz.
Model 32 Transporter
Catalog No. Model No.
Pipe Threading
Capacity
Rod
Threading
Capacity Spindle
Speed
Voltage Frequency
Max.
Geared
Threader
Capacity
Weight
in. mm in. mm V Hz in. mm lb. kg
15682 300 Complete 1/8-2 3-50 1/4-2 6-50 38RPM 115 50 - 60 6 150 212 96.2
15722 300 Complete 1/8-1
1/43-31 1/4-1
1/26-40 57RPM 115 50 - 60 6 150 212 96.2
97415 300A Complete* 1/8-2 -3-50 1/4-1
1/2- 38 RPM 230 50 - 60 6 -150 202 91.6
97420 300A Complete* 1/8-2 -3-50 1/4- 2 - 38 RPM 230 50 - 60 6 -150 202 91.6
Other voltages available upon request. Export machines equipped with special power cord sets.
*300A includes automatic oiling
THREADING
4.18
See page 4.12
Power Threading Machines
Model 535A Automatic Threading Machine
The Model 535A maintains the ruggedness of the industry workhorse while adding
features that make the threading operation more productive. A large chip tray and oil
reservoir make the 535A ideal for longer uninterrupted threading. The 535 features
a high clearance carriage that makes the threading operation easier and a generous
top cover area that is ideal for keeping tools and work related materials handy. The
535A is designed around maximum uptime with the upgrades that matter most to the
pipe working professional. Users also benet from the part commonality between the
535, the 535A Automatic and other RIDGID equipment.
• Automatic chuck.
• Large 1.75 gallon oil reservoir.
• Large chip tray.
• Generous top cover area for keeping tools and ttings handy.
• High clearance carriage.
• Can be used with geared threader Model 141.
• Uses Model 816/817 semi-automatic, Model 815A self opening or Model 811A
quick-opening die heads.
• Length gauge for quick, accurate cut-off.
Specifications
• Pipe Capacity – 1/8"-2" (3mm-50mm) 21/2"-4" (62mm-100mm) with 141 geared
threader.
• Bolt Capacity – 5/16"-2" (8mm-50mm).
• Spindle Speed – 3 speed 16/46/58 RPM.
• Motor – 2 HP, single-phase, 115V, 60 Hz, 20 Amp reversible induction motor.
• Switches – FOR/OFF/REV and Integral safety foot switch.
• Chuck – automatic with four reversible forged jaws.
• Rear Centering Device – automatic, centering only.
• Cutters – self-centering, full-oating. Two models available: One Standard. No.
820 Wheel-Type Cutter, pipe capacity 1/8"-2" (3mm-50mm), bolt capacity 1/4"-1"
(6mm-25mm). Two Optional. No. 821 Blade-Type cutter, pipe capacity 1/2"-2"
(12mm-50mm). See ordering chart.
• Reamer – 5-ute cone, RH, 1/8"-2" (3mm-50mm).
• Oil Pump – self-priming gerotor oil pump.
• RH/LH combination reamer available.
Standard Equipment
• 11931 – Thread Cutting Oil.
• 97065 – NPT Die Head Quick-Open R.H.
• 47765 – 1/2"-3/4" High Speed Dies
• 47770– 1" - 2" High Speed Dies
• 42365 – Reamer.
• 42390 – Wheel-Type Cutter.
• 41185 – Wheel, Cutter E1032.
• 46015 – Key, Hex 5/32.
• 46030 – Key, Hex 3/16.
4.19
THREADING
See page 4.12
Catalog
No.
Model
No. Description Voltage Chuck Cutter
Model RPM Die Head Weight
lb. kg
91142 535A Automatic Machine only 115 Automatic 820 16/46/58 340 155
84097 535A 1/2"-2" NPT Automatic 115 Automatic 820 16/46/58 811A 350 159
91322 535A 1/2"-2" NPT Automatic 115 Automatic 820 16/46/58 816/817 360 163
Machines listed as 1/2"-2" include standard equipment. Machine only includes standard equipment less all die heads and dies.
Please use catalog item numbers when ordering
Model 535A Machine Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
42365 341 Reamer 63/43.1
42390 820 Wheel-Type Cutter 81/23.9
92457 100A Universal Leg & Tray Stand 75 34.5
92462 150A Universal Wheel & Tray Stand 103 46.7
92467 200A Universal Wheel & Cabinet Stand 104 74.5
51005 819 Nipple Chuck Complete, 1/2" - 2" NPT 101/24.8
35867 839 Adapter Kit for No. 819 Nipple Chuck 161/27.5
97882 535A Kit 141 on 535 Auto Chuck with High-Clearance Carriage 12 5.4
12138 535A Left Hand Threading Kit 21/21.2
42485 4U 4 Heads 81/23.9
42490 6U 6 Heads 121/25.7
97065 811A 811A 1/8" - 2" NPT, Quick Opening, RH 13 5.9
97075 815A 815A 1/8" - 2" NPT Die Head, Self-Opening, RH 13 5.9
23282 842 Universal Die Head 121/25.7
97070 811A BSPT Die Head Quick-Open R.H. 121/25.7
97080 815A 815A 1/8"-2" BSPT Self-Opening Die Head 13 5.9
97045 531 Bolt Die Head Quick-Open R.H./L.H. 1/4"-1" 83.6
97050 532 Bolt Die Head Quick-Open R.H./L.H. 1 1/8"-2" 94.1
84537 816 1/8"-3/4" Semi-Automatic Die Head 13 5.9
84532 817 1/2" - 2" Semi-Automatic Die Head 13 5.9
68160 819 Nipple Chuck 1/2"-2" BSPT 101/24.8
23297 856 British Universal 121/25.7
Note: Mono Die Heads available 1/8", 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2". All Die Heads are through-head oiling
Dies: All Universal Pipe and Bolt Dies; all 500B Bolt Dies, See pages 4.30-4.32
Steel Cabinet Features
• 17-gauge steel walls and welded construction
• Two Internal and one external storage shelves
• Oversized bi-fold door with steel clasp
• Cut-outs for power cord and foot switch storage
• Two drain plugs for easy cleaning
No. 200A with Steel Cabinet
No. 100A
No. 150A
THREADING
4.20
See page 4.12
Power Threading Machines
Model 535 Threading Machine
The Model 535 maintains the ruggedness of the industry workhorse while adding the
features that makes the threading operation more productive. A large chip tray and oil
reservoir make the 535 ideal for longer uninterrupted threading. The 535 features a high
clearance carriage making the threading operation easier and a generous top cover area
that is ideal for keeping tools and work related materials handy. The 535 is designed around
maximum uptime with the upgrades that matter most to the pipe working professional. Users
also benet from the part commonality between the 535, the 535A Automatic and other
RIDGID equipment.
• Large 1.75 gal. (6.6 L) oil tray.
• Large chip tray.
• Generous top cover for keeping tools and ttings handy.
• High clearance carriage.
• Speed chuck with rocker-action jaws centers and grips work piece instantly.
• Can be used with geared threaders Models 141 and 161.
• Uses Model 816/817 semiautomatic, Model 815A self-opening or Model 811A quick-opening
die heads.
• Length gauge for quick, accurate cut-off.
Specifications
• Pipe Capacity – 1/8"-2" (3mm-50mm) 2 1/2"-4" (62mm-100mm), 4"-6" (100mm-150mm) with
141 and 161 geared threaders.
• Bolt Capacity – 1/4"-2" (6mm-50mm).
• Spindle Speed – 36 RPM standard (no load), 54 RPM model also available.
• Motor – 1/2HP, single-phase, 115V, 50/60 Hz, 15 amp reversible universal motor. (36 RPM)
• Switches – FOR/OFF/REV and Integral safety foot switch.
• Chuck – Speed Chuck™ with replaceable rocker-action jaw inserts (3).
• Rear Centering Device – Cam-action, turns with chuck.
• Cutters – Self-centering, full-oating. Two models available: One Standard. No. 820
Wheel-Type Cutter, pipe capacity 1/8"-2" (3mm-50mm), bolt capacity 1/4"-1" (6mm-25mm).
Two Optional. No. 821 Blade-Type cutter, pipe capacity 1/2"-2" (12mm-50mm). See ordering
chart.
• Reamer – 5-ute cone, RH, 1/8"-2" (3mm-50mm).
• Oil Pump – Self-priming gerotor oil pump.
• RH/LH combin ation reamer available.
Standard Equipment
• 42365 – Reamer
• 42390 – Wheel-Type Cutter
• 44185 – Wheel, Cutter E1032
• 46015 – Key, Hex 5/32
• 46035 – Key, Hex 3/16
• 47765 – Dies, Univ 1/2-3/4NPT
• 47770 – Dies, Univ. 1-2 NPT
• 70835 – Nu-Clear
• 97065 – 811A 1/8" - 2" NPT, Quick Opening, RH
4.21
THREADING
See page 4.12
Model 535 Threading Machine
Catalog
No.
Model
No. RPM Voltage Frequency Motor Capacity Dies Used Die Head Weight
V Hz in. lb. kg
93287 535 36 115 50 - 60 Universal 1/2- 2 NPT 811A 260.0 117.9
96497 535 36 115 50 - 60 Universal - - - 245.0 111.1
96502 535 54 115 50 - 60 Universal 1/2- 2 NPT* 811A 260.0 117.9
96507 535 36 230 50 - 60 Universal 1/2- 2 NPT 811A 260.0 117.9
*20 AMP, 115V circuit required
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
16723 -Drive Link Assembly for High Clearance Carriage 12 5.5
42405 844 Drive Bar for 141 53/42.6
42415 768 Drive Link Assembly for 141 21/21.1
51005 819 Nipple Chuck Complete, 1/2" - 2" NPT 101/24.8
84537 816 1/8"-3/4" Semi-Automatic Die Head 13 5.9
42365 341 Reamer 63/43.1
42390 820 Wheel-Type Cutter 81/23.9
58007 -Machine stand adapter bracket for 535’s built before 1996 17 7.7
92457 100A Universal Leg & Tray Stand 75 34.5
92462 150A Universal Wheel & Tray Stand 103 46.7
92467 200A Universal Wheel & Cabinet Stand 104 74.5
96517 MJ-1 535M Left Hand Threading Kit 31/21.6
97365 -Jaw Inserts for Coated Pipe 1/20.2
84532 817 1/2" - 2" Semi-Automatic Die Head 13 5.9
Machines Listed as 1/2-2" include Standard Equipment. Machine Only includes Standard Equipment less all Die Heads and Dies
All machines have 50/60 Hz Universal 1/2HP single-phase motors
Note: NPT Dies are for NPT Die Heads only. BSPT Dies are for BSPT Die Heads only
Please use Catalog Item Numbers when ordering. Use High Speed Dies for machines of 45 or more RPM
Steel Cabinet Features
• 17-gauge steel walls and welded construction
• Two Internal and one external storage shelves
• Oversized bi-fold door with steel clasp
• Cut-outs for power cord and foot switch storage
• Two drain plugs for easy cleaning
No. 200A with Steel Cabinet
No. 150A
No. 100A
Accessories
• Die Heads and Dies
• Die Head Racks
• Stands - Three Models Available
• Thread Cutting Oil
• Nipple Chuck
THREADING
4.22
See page 4.12
Power Threading Machines
Model 1215 Threading Machine
• Compact, lightweight design.
• One-piece aluminum housing.
• Two easy-to-use carrying handles.
• Integral foot switch hanger.
• Powerful motor and transmission.
• Through die head oiling.
• Adjustable oil ow control.
• Approved by CSA to CSA and UL standards (115V only).
Specifications
• Pipe Capacity – 1/4"-11/2" (6mm-37mm).
• Bolt Capacity – Bolt: 5/16"-1" (6mm-25mm).
• Spindle Speed – 44 RPM right hand operation.
• Motor – 1/2HP universal motor 50/60 Hz.
• Motor Control – ON/OFF heavy duty switch and integral foot switch.
• Front Chuck – Hammer type with replaceable rocker action jaw inserts.
• Rear Centering Device – Cam action.
• Oiling – Through die head adjustable.
• Pump – Self-priming constant ow, gerotor type.
• Cutter – Model 732.
• Reamer – Model 344, 1/4"-1
1/2".
Standard Equipment
• 97065 – 811A 1/8" - 2" NPT, Quick Opening, RH.
• 47745 – 1/2"-3/4" Universal Alloy Die Set.
• 47750 –1-1
1/2" Universal Alloy Die Set.
• 58657 – 732 Cutter Assembly.
• 34612 – Model 3441/8"-2" Reamer.
• 70835 – Nu-Clear.
Catalog No. Model No. Description Voltage Frequency Weight
V Hz lb. kg
61142 1215 1/2"-1 1/2" NPT 115 60 80 35
Call for BSPT and 230V Models.
Accessories
Catalog
No. Model No. Description Weight
lb. kg
61187 1203 Tripod Stand 15 6.8
62457 1219 Nipple Chuck, NPT For 1215 53/42.6
97045 531 Bolt Die Head Quick-Open R.H./L.H.1/4"-1" 83.60
84537 816 1/8"-3/4" Semi-Automatic Die Head 13 5.90
84532 817 1/2" - 2" Semi-Automatic Die Head 13 5.90
4.23
THREADING
See page 4.12
Power Threading Machines
Model 300 Compact Threading Machine
• Heavy-duty proven performance.
• Lightweight, portable design.
• Fast transport and set-up.
• Self-Contained Oil System with adjustable ow control.
• Versatility for threading and grooving.
• Quiet operation.
Specifications
• Pipe Capacity – 1/8" - 2" (3mm-50mm).
• Bolt Capacity – 1/4" - 2" (6mm-50mm).
• Spindle Speed – 38 RPM (52 RPM available).
• Motor – 1/2HP, 115V universal 50/60 Hz.
• Motor Control – Heavy duty rotary FOR/OFF/REV with integral foot switch.
• Chuck – Hammer-type with replaceable, rocker-action jaw inserts.
• Oiling System – Through-the-head, with integral oil reservoir. Self-priming, constant-ow,
gerotor pump.
•Standard Equipment
• 70835 – Nu-Clear.
• 97065 – 811A 1/8" - 2" NPT, Quick Opening, RH.
• 34612 – Model 3441/8"-2" Reamer.
• 42370 – Model 3601/8"-2" Full Floating, Self Centering Cutter.
• 47745 – 1/2"-3/4" Universal Alloy Die Set.
• 47750 –1-1
1/2" Universal Alloy Die Set.
– Key, Hex 5/32.
– Key, Hex 3/16.
– Key, Hex 5/16.
Catalog
No. Model No.
Pipe
Capacity Dies
Used
Spindle
Speed Voltage Frequency Weight
in. mm V Hz lb. kg
66947 300 Compact 1/8- 2 3 - 50 NPT 38 RPM 115 50-60 115 52.3
67182 300 Compact Kit 1/2- 2 3 - 50 NPT 38 RPM 115 50 - 60 160 72.7
73447 300 Compact* 1/8- 2 3 - 50 NPT 52 RPM 115 50-60 115 52.3
75602 300 Compact Kit* 1/8- 2 3 - 50 NPT 52 RPM 115 50 - 60 160 72.7
58752 300 Compact 1/8- 2 3 - 50 BSPT 38 RPM 230 50 - 60 115 52.3
58757 300 Compact 1/8- 2 3 - 50 NPT 38 RPM 230 50 - 60 115 52.3
*20 AMP, 115V circuit required.
Die Heads
Catalog
No. Model No. Description Weight
lb. kg
84537 816 1/8"-
3/4" Semi-Automatic Die Head 13 5.9
97045 531 Bolt Die Head Quick-Open R.H./L.H.1/4"-1" 83.6
97050 532 Bolt Die Head Quick-Open R.H./L.H. 11/8"-2" 94.1
97065 811A 811A1/8" - 2" NPT, Quick Opening, RH 13 5.9
97075 815A 815A1/8" - 2" NPT Die Head, Self-Opening, RH 13 5.9
84532 817 1/2" - 2" Semi-Automatic Die Head 13 5.9
97070 811A BSPT Die Head Quick-Open R.H. 121/25.7
97080 815A 815A1/8"-2" BSPT Self-Opening Die Head 13 5.9
Accessories
Catalog
No. Model No. Description Weight
lb. kg
51005 819 Nipple Chuck Complete, 1/2" - 2" NPT 101/24.8
67662 Adapter Bracket for 300 PD Version of 916 Roll Groover 30 13.6
68160 819 Nipple Chuck 1/2"-2" BSPT 101/24.8
Stands
Catalog
No.
Model
No. Description Weight
lb. kg
67657 250 Folding Wheel Stand 45 21.0
92457 100A Universal Leg & Tray Stand 75 34.5
92462 150A Universal Wheel & Tray Stand 103 46.7
92467 200A Universal Wheel & Cabinet Stand 104 74.5
THREADING
4.24
See page 4.12
Threader Stands
Threader Stands
Stands are available to satisfy every operational situation. The Model 250 Folding Wheel Stand
provides increased eld maneuverability and productivity.
Catalog
No.
Model
No. Description Weight
lb. kg
20105 1406 Folding Wheel Stand w/ No. 1460 Oil Pan Cover 711/232.50
92457 100A Universal Leg & Tray Stand 75 34.50
92462 150A Universal Wheel & Tray Stand 103 46.70
92467 200A Universal Wheel & Cabinet Stand 104 74.50
67657 250 Folding Wheel Stand 45 21.00
22563 -Steel Cabinet 42 19.30
Model 150A
Model 200A
Model 1406
Model 100A
Model 250
4.25
THREADING
See page 4.12
Optional Die Heads
• Self-Opening (SO) – Automatic release for repeatable number of threads.
• Quick-Opening (QO) – Manual release for user-specied thread lengths.
• Bolt – Specially for bolt threader.
• Mono – Dedicated to a specic size of thread.
• Semi-Automatic (SA) – Can be quickly adjusted from size to size with manual release.
Machine NPT Die Heads
Catalog
No.
Model
No. Description How
Opened
Thread
Direction
Oil Thru
Head
Dies
Used
Pipe
Capacity
Bolt
Capacity Weight
in. mm in. mm lb. kg
97065 811A 811A 1/8" - 2" NPT, Quick Opening, RH Q.O RH Yes Univ. 1/8-2 3-50 1/4-2 6-50 13 5.9
97075 815A 815A 1/8" - 2" NPT Die Head, Self-Opening, RH S.O RH Yes Univ. 1/8-2 3-50 1/4-2 6-50 13 5.9
84537 816 1/8"-3/4" Semi-Automatic Die Head S.A RH Yes Univ. 1/8-3/4- - - 13 5.9
84532 817 1/2" - 2" Semi-Automatic Die Head S.A RH Yes Univ. 1 - 2 - - - 13 5.9
23282 842 Universal Die Head Q.O LH Yes Univ. 1/8-2 - - - 121/25.7
10491 555 555 Q.O RH Yes Dual/
Bolt 1/8-3/4---83.6
Machine BSPT Die Heads
Catalog
No.
Model
No. Description How
Opened
Thread
Direction
Oil Thru
Head
Dies
Used
Pipe Capacity Bolt
Capacity Weight
in. mm in. mm lb. kg
97070 811A BSPT Die Head Quick-Open R.H. Q.O RH Yes Univ. 1/8-2 3-50 0-2 6-2 121/25.7
97080 815A 815A 1/8"-2" BSPT Self-Opening Die Head S.O RH Yes Univ. 1/8-2 3-50 0-2 6-50 13 5.9
23297 856 British Universal S.O LH Yes Univ. 1/8-2 - - - 121/25.7
Machine Bolt Die Heads
Catalog
No.
Model
No. Description How
Opened
Thread
Direction
Oil Thru
Head
Dies
Used
Pipe Capacity Bolt Capacity Weight
in. mm in. mm lb. kg
97045 531 Bolt Die Head Quick-Open R.H./L.H. 1/4"-1" Q.O RH/LH Yes 500B - - 1/4-1 3-25 83.6
97050 532 Bolt Die Head Quick-Open R.H./L.H. 1 1/8"-2" Q.O RH/LH Yes 500B - - 11/8-2 29-51 94.1
Machine Mono Die Heads
Catalog
No. Model No. Description How
Opened
Thread
Direction
Oil Thru
Head
Dies
Used
Pipe Capacity Bolt Capacity Weight
in. mm in. mm lb. kg
42047 500A Mono Q.O RH Yes Mono 1/83--6
3/43.1
42052 500A Mono Q.O RH Yes Mono 1/46--73.2
42057 500A Mono Q.O RH Yes Mono 3/810 - - 73.2
42062 500A Mono Q.O RH Yes Mono 1/213 - - 71/43.3
42067 500A Mono Q.O RH Yes Mono 3/419 --71/43.3
42072 500A Mono Q.O RH Yes Mono 125--83.6
42077 500A Mono Q.O RH Yes Mono 11/429 --83.6
42082 500A Mono Q.O RH Yes Mono 11/238 - - 81/23.9
42087 500A Mono Q.O RH Yes Mono 251--81/23.9
Used On: 1215, 1233, 535, 535A, 1822 Machines and 300, 300 Compact and 300-A w/carriage.
No. 811A Die Head replaces No. 811 and No. 841 Die Heads
No. 815A Die Head replaces No. 815 and No. 845 Die Heads
No. 500A Die Head replaces No. 500 Mono Die Heads.
No. 555 Die Head replaces No. 515
Note: British Die Heads use British Dies only
Note: 531 and 532 Die Heads replace 500B Dia Head
Individual Machine Die Heads do not include Dies
Die Head Racks for All Machine Die Heads
Catalog
No. Model No. Description Weight
lb. kg
42485 4U 4 Heads 81/23.9
42490 6U 6 Heads 121/25.7
No. 532 Bolt Die Head
No. 816/817 Semi-Automatic
Mono Die Head
No. 811A Quick-Opening Die Head
No. 815A Self-Opening Die head
THREADING
4.26
See page 4.12
Power Threading Machines
Model 1224 Threading Machine
• The Model 1224 threads a wide range of pipe including black, galvanized and plastic-
coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up
to 30 Rockwell C.
• An induction motor helps minimize noise.
• A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of
material where voltage drop is experienced.
•1/4"-2" Universal Die Head; 21/2"-4" receding die head allows cutting of tapered or straight
NPT/NPSM or BSPT/BSPP threads.
• Constant and proper lubrication of dies and workpiece with through-head oiling.
Specifications
• Nominal Pipe Capacity – 1/4"-2" (6mm-100mm) @ 36 RPM, 2-1/2"-4" (65mm-100mm) @ 12
RPM, 4"-6" (100mm-150mm) with 161 Geared Threader.
• Bolt Capacity – 1/4"-2" (6mm-50mm).
• Spindle Speed – 36/12 RPM.
• Motor – 11/2HP, single-phase, 60 Hz or 50 Hz, induction type.
• Motor Control – Reverse/Off/Forward, heavy-duty rotary-type and integral foot switch.
• Gear Box – Two-speed gear box 3:1 ratio.
• Chuck – Hammer-type with replaceable rocker-action jaw inserts.
• Rear Centering Device – Cam action.
• Oiling Pump – Self-priming, gerotor-type, automatic-reversing, constant- ow.
• Oiling: – Through die head.
Standard Equipment
• 26132 – Diehead, 711 SO Univ L/Dies.
• 26152 – Diehead, 714 SO Recd L/Dies.
• 26192 – Dies. 1224 2-1/2"-4NPT HS.
• 26212 – 1/4"-4" Wheel-Type Cutter.
• 26217 – 1/4"-4" Blade-Type Reamer.
• 33125 – Wheel, Cutter F229.
• 46030 – Key, Hex 3/16.
– Key, Hex 7/32.
– Key, Hex 1/4.
• 47795 – Dies, Univ 1/2-3/4NPT.
• 47750 – Dies, Univ 1-2 NPT.
• 70835 – Nu-Clear.
– Wrench, 3/4COMB.
– Tool Box.
Catalog No. Model No. RPM Capacity Dies Used Voltage Frequency Weight
in. V Hz lb. kg
26092 1224 36/12 1/2- 4 NPT 120 60 509.0 231.0
26097 1224 36/12 1/2- 4 NPT 240 60 509.0 231.0
26127 1224 36/12 1/2- 4 BSPT 120 60 509.0 231.0
26112 1224 36/12 1/2- 4 BSPT 115 50 463.0 231.0
26122 1224 36/12 1/2- 4 BSPT 240 60 509.0 231.0
26107 1224 36/12 1/2- 4 BSPT 220 50 463.0 210.0
31442 1224 36/12 1/2- 4 NPT 220 50 463.0 210.0
4.27
THREADING
See page 4.12
Stands
Catalog
No.
Model
No. Description Weight
lb. kg
22563 -Steel Cabinet 42 19.30
92457 100A Universal Leg & Tray Stand 75 34.50
92462 150A Universal Wheel & Tray Stand 103 46.70
92467 200A Universal Wheel & Cabinet Stand 104 74.50
Die Heads
Catalog
No.
Model
No. Description Capacity Weight
in. mm lb. kg
26132 711 Universal Self-Opening R.H.. NPT 1/4- 2 6.4 - 50.8 12.2 5.6
26137 911 Universal Self-Opening R.H.. BSPT 1/4-2 6.4 - 50.8 12.2 5.6
26142 713 Universal Quick-Opening L.H.. NPT 1/4- 2 64 - 102 12.2 5.6
26147 913 Universal Quick-Opening L.H.. BSPT 1/4- 2 6.4 - 50.8 12.2 5.6
26152 714 Receding Self-Opening R.H.. NPT 21/2- 4 6.4 - 50.8 30.0 13.6
26157 914 Receding Self-Opening R.H.. BSPT 21/2- 4 64 - 102 30.0 13.6
26162 541 Quick-Opening Bolt L.H./R.H. 1/4- 1 6.4 - 25.4 7.5 3.4
26167 542 Quick-Opening Bolt L.H./R.H. 11/8- 2 29 - 50.8 9.2 4.2
55447 725 Cut-Grooving Die Head 21/2- 4 64 - 102 30.0 13.6
55452 766 Blade Type Cutter 3/4- 4 64 - 88.9 21.0 9.5
57492 - 4" Grooving Die Set* - - 2.2 1.0
57497 -2
1/2"-3 1/2" Grooving Die Set* 21/2-3
1/2102 2.2 1.0
57502 - 4" Grooving Bit only* - - - -
57507 -2
1/2"-3 1/2" Grooving Bit only* - 19 - 102 - -
58712 - Cut-Off Tool Bit - - - -
Note: Die Heads do not include dies. All Die Heads are through-head oiling
*Not for use with stainless steel
Pipe Dies
Catalog
No. Description Capacity Weight
in. mm lb. kg
26192 1224 H.S. Dies NPT 21/2- 4 62 - 100 2.2 1.0
31827 1224 H.S. NPT Dies for Plastic-Coated Pipe 21/2- 4 62 - 100 2.2 1.0
31832 1224 H.S. BSPT Dies for Plastic-Coated Pipe 21/2- 4 62 - 100 2.2 1.0
32237 1224 H.S. Dies NPT for PVC 21/2- 4 62 - 100 2.0 1.0
32242 1224 H.S. Dies BSPT for PVC 21/2- 4 62 - 100 2.0 1.0
33057 1224 H.S. Dies NPT for Stainless Steel 21/2- 4 62 - 100 2.0 1.0
33072 1224 45˚ Beveling Dies 21/2- 4 62 - 100 2.0 1.0
33077 1224 37 1/2˚ Beveling Dies 21/2- 4 62 - 100 2.0 1.0
33642 1224 H.S. Dies BSPT 21/2- 4 62 - 100 2.2 1.0
44992 1224 Bevel Guide Set 21/2- 4 62 - 100 2.0 1.0
44997 1224 37 1/2˚ Bevel Bit Only - - - -
45002 1224 45˚ Bevel Bit Only - - - -
Note: NPSM threads are made with NPT dies by adjusting the die head. See manual for details.
Accessories
Catalog
No.
Model
No. Description Capacity Weight
in. mm lb. kg
51005 819 Nipple Chuck Complete. 1/2"-2"NPT 1/2-2 12-50 10.5 4.8
61122 840A Universal Drive Shaft - - 31.0 14.1
26187 - Jaw Insert and Roll Set for PE-Coated Pipe - - 0.2 0.1
26212 764 1/4" - 4" Wheel-Type Cutter - - 19.0 8.6
26217 744 1/4" - 4" Blade-Type Reamer - - 13.0 5.9
26707 - Gear Grease (1224 & 1822) - - 1.0 0.5
34157 419 Nipple Chuck 21/2" NPT - - 5.5 2.5
34162 419 Nipple Chuck 3" NPT - - 5.5 2.5
34167 419 Nipple Chuck 4" NPT - - 5.5 2.5
34172 419 Nipple Chuck 21/2" BSPT - - 5.5 2.5
34177 419 Nipple Chuck 3" BSPT - - 5.5 2.5
34182 419 Nipple Chuck 4" BSPT - - 5.5 2.5
34577 -1/4" - 4" Reamer Blade - - 0.5 0.2
Model 714 (914) Style Receding Die Head
Model 541
Model 542
Model 713
Model 913
THREADING
4.28
See page 4.12
Pipe Dies for Machine Die Heads
Pipe Dies for use in Universal Die Heads (Models 504A, 711, 713, 811A, 815A, 816, 817 and 842)
Pipe Dies for use in British Universal Die Heads (Models 504A, 811A, 815A, 816, 817, 856, 911 and 913)
Conduit Dies for Universal Die Heads
Pipe Dies for use in Model 500A Mono Die Heads
Pipe Dies for Models 514 (LH), 515 (RH), 555 (RH), and 1⁄2"-3⁄4" Dual Die Heads
Pipe Dies for 1⁄4"-3⁄8" Dual Die Heads (Model 502)
(NPT) (NPSM)
Nominal Pipe Size-Threads Per Inch Nominal Pipe Size-Threads Per Inch
Die Material or Type 1⁄8"-27 1⁄4"-3⁄8"-18 1⁄2"-3⁄4"-14 1"-2"-111⁄21⁄8"-27 1⁄4"-3⁄8"-18 1⁄2"-3⁄4"-14 1"-2"-111⁄2
Alloy RH 47735 47740 47745 47750 ----
High-Speed RH 47755 47760 47765 47770 47845 47850 47855 47860
High-Speed •LH 39587 47810 47815 47820 ----
H.S. For Stainless Steel RH 47775 47780 47785 47790 ----
H.S. For Cast Iron - - - 70740 ----
H.S. For PVC RH - - 70745 70750 ----
H.S. For Plastic Coated Pipe RH - - 50012 31822 ----
•Requires left hand model die head.
Note: Use HS for PVC and RH for brass pipe.
(BSPT) (BSPP)
Nominal Pipe Size-Threads Per Inch Nominal Pipe Size-Threads Per Inch
Die Material or Type 1⁄8"-28 1⁄4"-3⁄8"-19 1⁄2"-3⁄4"-14 1"-2"-11 1⁄8"-28 1⁄4"-3⁄8"-19 1⁄2"-3⁄4"-14 1"-2"-11
Alloy RH *66655 *66660 *66665 *66670 ----
High-Speed RH *66750 *66755 *66760 *66765 *66795 *66800 *66805 *66810
H.S. For Stainless Steel RH *66770 *66775 *66780 *66785 - - - *66830
H.S. For PVC RH - - *70755 *70760 ----
H.S. For PE-Coated RH --------
* Requires British model die head.
(ISO) (BEC)
Nominal Conduit Size – Pitch in mm Nominal Conduit Size – Threads Per Inch
Die Material or Type 16-32mm-1.5 40-63mm-1.5 1⁄2"-5⁄8"-18 3⁄4"-11⁄4"-16 11⁄2"-21⁄2"-14
Alloy RH 50645 50650 66700 66705 66710
Nominal Pipe Size-Threads Per Inch (NPT)
Die Material or Type 1⁄8"-27 1⁄4"-18 3⁄8"-18 1⁄2"-14 3⁄4"-14 1"-111⁄211⁄4"-111⁄211⁄2"-111⁄22"-111⁄2
(NPT)
High-Speed RH 50700 50705 50710 50715 50720 50725 50730 50735 50740
H.S. For Stainless Steel RH 50745 50750 50755 50760 50765 50770 50775 50780 50785
(NPSM)
High-Speed RH - - - 50895 50900 50905 50910 50915 50920
(NPT) Nominal Pipe-Threads Per Inch
Die Material or Type 1⁄4"-3⁄8"-18 TPI
High-Speed RH 47940
(NPT) (BSPT)
Nominal Pipe Size-Threads Per Inch Nominal Pipe Size-Threads Per Inch
Die Material or Type 1⁄8"-27 1⁄4"-3⁄8"-18 1⁄2"-3⁄4"-14 1⁄4"-3⁄8"-19 1⁄2"-3⁄4"-14
Alloy RH - - 47880 66955 66880
High-Speed RH 47885 47890 47895 66905 23297
H.S. For Stainless Steel RH 47900 47905 47910 - 66920
4.29
THREADING
See page 4.12
Pipe Dies, Bolt Dies for Machine Die Heads
Bolt Dies for Models 500B, 532
and 542 Die Heads
Beveling Dies
For beveling pipe prior to welding. A set of beveling dies consists of three guide segments and one cutting segment.
Cut Grooving Dies
To cut groove pipe for mechanical type couplings, consult chart for sizes and die head information.
(NPT) (NPSM)
Pipe Size-TPI Pipe Size-TPI
Die Material or Type 21⁄2"-4"x8 TPI 21⁄2"-4"x8 TPI
H.S. RH 99545 94220
Pipe Dies for Models 424 and 415 Die Head
(UNC) (UNF) (BSW)
Rod Size – TPI RH High-Speed Rod Size – TPI RH High-Speed Rod Size – RH TPI High-Speed
1⁄4"-20 48215 1⁄4"-28 48295 1⁄4" - 20 *67880
5⁄16" - 18 48220 --5⁄16" - 18 *67885
3⁄8"-16 48225 3⁄8" - 24 48305 3⁄8" - 16 *67890
7⁄16"- 14 48230 7⁄16" - 20 48310 7⁄16"-14 -
1⁄2"- 13 48235 1⁄2" - 20 48315 1⁄2" - 12 *67900
9⁄16" - 12 48240 9⁄16" - 18 48320 9⁄16" - 12 *67905
5⁄8"-11 48245 5⁄8" - 18 48325 5⁄8" - 11 *67910
3⁄4" - 10 48250 3⁄4" - 16 48330 3⁄4" - 10 *67915
7⁄8"-9 48255 7⁄8" - 14 48335 7⁄8" - 9 67920
1" - 8 48260 1" - 14NS 48340 1" - 8 *67925
11⁄8" - 7 48265 1" - 12 48375 11⁄8"-7 -
11⁄4" - 7 48270 11⁄8" - 12 48345 11⁄4" - 7 *67935
13⁄8"-6 48275 11⁄4" - 12 48350 13⁄8"-6 -
11⁄2" - 6 48280 13⁄8" - 12 48355 11⁄2" - 6 *67945
13⁄4"-5 48285 11⁄2" - 12 48360 13⁄4"-5 -
2"-4
1⁄248290 - - 2" - 41⁄267955
* Requires British model die head.
Bolt Dies for Universal Die Heads (Models 504A, 711, 811A, 815A, 816, 817 and 911 Die Heads)
(8 UN)
Rod Size – TPI RH High-Speed
11⁄8"-8 49215
11⁄4" - 8 49220
13⁄8"-8 49225
11⁄2" - 8 49230
13⁄4" - 8 49240
17⁄8"-8 49245
2" - 8 49250
(12 UN)
2" - 12 49345
Catalog
No. Description Pipe Size Used in
Die Head
Weight
in. mm lb. kg
52192 371⁄2˚ Bevel Die Set 1⁄2-3⁄412-20 Universal 10.5
50960 371⁄2˚ Bevel Die Set 1-2 25-50 Universal 10.5
52202 45˚ Bevel Die Set 1⁄2-3⁄412-20 Universal 10.5
50965 45˚ Bevel Die Set 1-2 25-50 Universal 10.5
Catalog
No. Description Pipe Size Used in
Die Head
Weight
in. mm lb. kg
52217 Grooving Die Set 1⁄2-3⁄412-20 Universal 10.5
50985 Grooving Die Set 1-2 25-50 Universal 10.5
Note: 21⁄2- 4 Beveling Dies are available for the Model 1224 threading Machine. See accessories for Model 1224.
Note: Universal Dies fit all Universal Die Heads.
THREADING
4.30
See page 4.12
For use with Models
532, 542 and 500B 11/8"-
2" Die Heads
For use with Models
531, 541 and 500B
1/4"-1" Die Heads
Bolt Dies for Models 500B and 531, 532, 541 and 542 Die Heads (Continued)
For use with Models
532, 542 and 500B
11/8"-2" Die Heads
For use with Models
531, 541 and 500B 1/4"-
1" Die Heads
For use
with Models
532, 542 and
500B 11/8"-2"
Die Heads
For use
with Models
531, 541 and
500B 1/4"-1"
Die Heads
For metric high-speed rebar dies, Series B, ISO, see price list.
(UNC) (UNF)
Rod Size – TPI RH
High-Speed
LH
High-Speed Rod Size – TPI RH
High-Speed
1⁄4"-20 48605 –1⁄4"-28 48690
5⁄16"-18 48610 48915 5⁄16"-24 48695
3⁄8"-16 48615 48920 3⁄8"-24 48700
7⁄16"-14 48620 48925 7⁄16"-20 48705
1⁄2"-13 48625 48930 1⁄2"-20 48710
9⁄16"-12 48630 48935 9⁄16"-18 48715
5⁄8"-11 48635 48940 5⁄8"-18 48720
3⁄4"-10 48640 48945 3⁄4"-16 48725
7⁄8"-9 48645 48950 7⁄8"-14 48730
1"-8 48650 48955 1"-12 48735
11⁄8"-7 48655 48960 1"-14NS 49305
11⁄4"-7 48660 48965 11⁄8"-12 48740
13⁄8"-6 48665 48970 11⁄4"-12 48745
11⁄2"-6 48670 48975 13⁄8"-12 -
13⁄4"-5 48675 - 11⁄2"-12 48755
2"-41⁄248680 48985 --
(BSW))
Rod Size - TPI RH
High-Speed
1⁄4"-20 -
5⁄16"-18 -
3⁄8"-16 67615
7⁄16"-14 67620
1⁄2"-12 67625
9⁄16"-12 -
5⁄8"-11 67635
3⁄4"-10 67640
7⁄8"-9 67645
1"-8 67650
11⁄8"-7 67655
11⁄4"-7 67660
13⁄8"-6 67665
11⁄2"-6 -
15⁄8"-5 67675
13⁄4"-5 -
17⁄8"-41⁄267685
2"-41⁄2-
Dies for Rebar, for use in Models 500B, 531, 532, 541 and 542 Die Heads
Cat No. Cat No.
(UNC) (UNF)
RH
High-Speed
Rebar Size–
TPI
RH
High-Speed
Rebar Size–
TPI
34077 3⁄8"-16 85850 1"-8
34082 1⁄2"-13 79120 11⁄8"-7
34087 5⁄8"-11 85855 13⁄8"-6
34092 3⁄4"-10 - -
Acme (S.I.) Series A Metric Series B Metric (ISO) International Standards. Org.
Rod Size - TPI RH
High-Speed
Rod Size
Thread Pitch RH
High-Speed
LH
High-Speed
Rod Size
Thread Pitch RH
High-Speed
Rod Size
Thread Pitch RH
High-Speed
in. mm in. mm in. mm
- - M6-1.0 49795 49845 - - M6-1.0 50040
- - M7-1.0 - 49850 - - M7-1.0 -
- - M8-1.25 49805 - - - M8-1.25 50050
- - M9-1.25 - - - - M9-1.25 -
- - M10-1.5 49815 - M10-1.0 50560 M10-1.5 50060
- - M11-1.5 49820 49870 - - M11-1.5 -
3⁄4"-6 49610 M12-1.75 49825 49875 M12-1.5 85865 M12-1.75 50070
- - M14-2.0 49830 - M14-1.5 - M14-2.0 50075
- - M16-2.0 49835 - M16-1.5 50575 M16-2.0 50080
- - M18-2.5 49840 49890 - - M18-2.5 50085
- - M20-2.5 50480 49895 M20-1.5 50585 M20-2.5 50090
- - M22-2.5 50485 49900 M22-1.5 50590 M22-2.5 50095
1"-5 49585 M24-3.0 50490 49905 M24-2.0 85870 M24-3.0 50100
- - M25-3.0 50495 - - - M27-3.0 50105
- - M26-3.0 - - - - M30-3.5 50110
- - M27-3.0 50500 - M27-2.0 - M33-3.5 50115
- - M30-3.5 50505 49915 M30-2.0 - M36-4.0 50120
11⁄4"-5 49600 M33-3.5 50510 - - - M39-4.0 50125
- - M36-4.0 50515 49925 - - M42-4.5 50130
13⁄8"-4 - M39-4.0 50520 49930 - - M45-4.5 -
- - M42-4.5 50525 - - - M48-5.0 50140
- - M45-4.5 50530 - - - M52-5.0 -
- - M48-5.0 50540 - - - - -
- - M50-5.0 50545 - - - - -
- - M52-5.0 50550 - - - - -
4.31
THREADING
See page 4.12
819 Nipple Chuck Kit
• Holds short or close nipples for threading.
• For use with 300 Power Drive, 300 Compact, 535 and 1822 (with adapter
kit) and 1224 Threading Machines.
Standard Equipment
• 51020 – Nipple Chuck Wrench.
• Insert, nipple chuck.
• Adaptor, 1/2NPT.
• Adaptor, Stud 3/4NPT.
• Adaptor Stud 1" NPT.
• Adaptor, Stud 1-1/4NPT.
• Adaptor, Stud 1-1/2NPT.
Catalog
No.
Model
No. Description Weight
lb. kg
51005 819 Nipple Chuck Complete, 1/2" - 2" NPT 101/24.80
68160 819 Nipple Chuck 1/2" - 2" BSPT 101/24.80
35867 839 Adapter Kit for No. 819 Nipple Chuck 161/27.50
51020 D-380-X Nipple Chuck Wrench 1/40.1
62457 1219 Nipple Chuck, NPT For 1215 53/42.6
Pipe Adapters
Catalog
No.
Model
No. Thread Type Sizes Weight
in. mm lb. kg
51040 E-729 NPT 1/8-1/223
51045 E-730 NPT 1/4-1/223
51050 E-731 NPT 3/8-1/223
51055 E-732 NPT 1/2-1/223
51060 E-733 NPT 3/4-1/223
51065 E-734 NPT 1-1/223
51070 E-735 NPT 11/4-1/223
51075 E-735 NPT 11/2-1/223
68165 E-732-B BSPT 1/2-1/223
68170 E-733-B BSPT 3/4-1/223
68175 E-734-B BSPT 1-1/223
68180 E-735-B BSPT 11/4-1/223
68185 E-736-B BSPT 11/2-1/223
68195 E-730-B BSPT 1/4-1/223
68200 E-731-B BSPT 3/8-1/223
For use with Model 819 Nipple Chuck to allow close nipple threading of all sizes of pipe smaller
than 2 inches.
Nipple Chucks / Adapters
RIDGE TOOL COMPANY
5.1
ROLL GROOVING
Roll Grooving
• Designed to improve speed and efciency for re sprinkler and other industrial installations.
• Wide selection of mechanical and hydraulic units for applications up to 24" in diameter.
______________________________________________________________________
Roll Grooving Type No. of Models Pipe Capacity
(in.) Page
915 Manual Roll Groover 11
1⁄4- 12 5.3
975 Combo Roll Groover 2 11⁄4- 6 5.4
916 Power-Driven
Roll Groover 4 2-6 5.5
918 Hydraulic Roll Groover 51-12 5.6
918-I Electric Roll Groover 2 1 - 12 5.7
920 Electric Roll Groover 12-24 5.8
ROLL GROOVING
5.2
Pipe Size & Schedule Capacities
Model Material Pipe Size (inches)/Schedule
975
page 5.4
1 1¼ 1½ 2 2½ 3 3½ 4 4½ 5 6 8 10 12 14 16 18-24
Steel Sch. 5, 10, 40
Stainless Sch. 5, 10, 40 Sch. 5, 10
Aluminum Sch. 5, 10, 40
PVC 40 Sch. 40, 80 Sch. 40
Copper K, L K, L, M K, L,M&DW
916
page 5.5
Steel Sch. 5, 10, 40 Sch. 5, 10
Stainless 5, 10 Sch. 5, 10, 40 Sch. 5, 10
Aluminum Sch. 5, 10, 40 Sch. 5, 10
PVC Sch. 40 Sch. 40, 80 Sch. 40
Copper K, L K, L, M K, L,M&DWV
915
page 5.3
Steel Sch. 5, 10, 40 Sch. 5, 10
Stainless Sch. 5, 10, 40 Sch. 5, 10
Aluminum Sch. 5, 10, 40 Sch. 5, 10
PVC 40 40, 80 40 Sch. 40, 80 Sch. 40
Copper K, L K, L, M K, L,M&DWV
918/918-I
page 5.6&5.7
Steel Sch. 5, 10, 40 Sch. 5, 10
Stainless 5, 10 Sch. 5, 10, 40 Sch. 5, 10
Aluminum Sch. 5, 10, 40 Sch. 5, 10
PVC 40 40 40, 80 40 Sch. 40, 80 Sch. 40
Copper K, L K, L, M K, L,M&DWV
920
page 5.8
Steel Sch. 5, 10, 40* 5, 10 std.** 5, 10
Stainless Sch. 5, 10, 40* 5, 10 std.** 5, 10
Aluminum Sch. 5, 10, 40* 5, 10 std.** 5, 10
PVC 40 Sch. 40, 80 Sch. 40
Copper K, L K, L, M K, L,M&DWV
*8" grooving is not recommended for Sch.40 ifpipe hardness is above 150 BHN.
** Std.= Standard wall thickness (.375).
Note: Use of roll sets on both carbon and stainless steel pipe can lead to contamination of the stainless material.This contamination could cause corrosion and premature pipe failure.
To prevent ferrous contamination, use roll sets dedicated for stainless steel grooving.
Note: Consult groover manual for exact capacity specifications.
975 916 915 918 918-I 920
Page 5.4 Page 5.5 Page 5.3 Page 5.6 Page 5.7 Page 5.8
Capacity 11⁄4"-6"1⁄4"-6"11⁄4"-12"1"-12"1"-12"2"-24"
Weight 26 lbs. 33 lbs. 23 lbs. 81 lbs. 185 lbs. 160 lbs.
“In-Place” Groover ••
Hydraulic Actuated •••
Will do SS, PVC, Al ••••••
Roll Sets for Copper ••••••
Drive Units RIDGID 300 / Page 4.16 RIDGID 300 / Page 4.16 Hand RIDGID 300 / Page 4.16 Included RIDGID 300 / Page 4.16
or hand** RIDGID 535* / Page 4.20 RIDGID 535* / Page 4.20
Usage Field Field Field Fab Shop / Field Fab Shop/Field Fab Shop/Field
*Adapter pieces required.
** Works as powered or in-place groover.
Note:Please check schedules in charts.
Threader Model
Roll Groover Model 1210* 1215* 300 Complete 300 Compact 535 Manual 535 Auto* 1224
916 ––45007 67662 60382 ––
975 – – 91207 ––––
918-1 ––48297 ––––
918-2 –––––––
918-4 ––––––48382
918-5 ––––48387 ––
920 ––95782 ––––
Roll Groover/Threader Compatibility
*Not recommended for roll grooving applications.
5.3
ROLL GROOVING
915 Roll Groover
The RIDGID 915 Roll Groover is a manual roll groover for in-place eld applications.
The 915 requires only 31/2" of clearance to travel around a pipe and a minimum of
23/4" of exposed pipe for grooving. With the appropriate roll sets, the 915 can groove
from 11/4" to 12" pipe, the widest range in its class! The 915’s cast-in handle allows
for easy transport or chaining the groover down to prevent theft. The 915 is a must
for service work crews.
• Lightweight design – only 23 pounds.
• Available customized tool box – holds 915 groover and all available roll sets.
• Easy to use depth setting gauge – helps make accurate grooves.
• Easy roll set change out – up to 12" pipe capacity in one unit for service versatility.
• Cast-in carrying handle – easy to transport or lock up to prevent theft.
• Included ratchet – 90 degree bend-in handle makes grooving easier.
Standard Equipment
• 93642 – Groove Roll 2" - 6".
• 93757 – Drive Roll 2" - 6".
• 92202 – 1/2" Drive 90 Degree Ratchet.
Specifications
• Capacity
– 11/4" - 12" Sch. 10 Steel and Stainless Steel Pipe.
– 2"- 8" K, L, M, DWV Copper.
– 11/4" - 6" Sch. 40 PVC.
– 11/2", 21/2" - 3" Sch. 80 PVC.
• Weight – 23 lbs. (including ratchet).
• Operation – Feed screw with 1/2" ratchet wrench (included).
Catalog
No.
Model
No. Description Weight
lb. kg
88232 915 915 Roll Groover with 2" - 6" Sch. 10 (2" - 31/2" Sch. 40) Roll Set 23 10.40
Accessories
Catalog
No. Description Weight
lb. kg
92437 Drive and Groove Roll Set for 11/4"-1
1/2" Sch. 10 or 40 Steel,Stainless
Steel,PVC 2.0 0.9
92447 Drive and Groove Roll Set for 4" - 6" Sch. 40 Steel,Stainless Steel,PVC 4.5 1.9
92442 Drive and Groove Roll Set for 8" - 12" Sch. 10 Steel,Stainless Steel,PVC 4.5 1.9
92452 Drive and Groove Roll Set for 2" - 8" Copper Tube Type K,L,M,and DWV 2.0 0.9
93497 915 Tool Box 21.5 9.7
76827 Metric Diameter Tape 0.5 0.1
76822 Inch Diameter Tape 0.5 0.1
93642 Groove Roll 2" - 6" 0.9 0.4
93757 Drive Roll 2" - 6" 1.3 0.6
Note: A Roll Groove Set consists of a Groove Roll and a Drive Roll.
Copper Roll Groove Set includes Black Reaction Arm and one Copper Stabilizer Pad.
Manual Roll Groovers
ROLL GROOVING
5.4
975 Combo Roll Groover
•Auto Tracking & Depth Setting Gauge Means Easier Use – The 975 Combo
Groover includes new, patented auto tracking technology for signicantly easier
grooving. Whether you're doing machine-powered or manual grooving, the Auto-
Track gauge keeps the pipe automatically engaged to the groover throughout the
grooving process. The 975 also includes a permanently depth setting gauge for
quicker, repeatable set-up.
•Less Hand Force Required – When manually roll grooving, the 975's 55%
higher gear reduction means less hand force required versus competitive manual
roll groovers. This is especially helpful for over-head roll grooving.
•Durability And Portability – A tough, ductile iron construction means the 975
can absorb jobsite abuse and provide accurate grooves time after time. A cast-in
handle makes the 975 easily portable to and from the jobsite.
Standard Equipment
• 30883 – Shaft, Drive.
• 30933 – Roll Groove.
• 30703 – Ratchet, 1/2" Drive With 90° Bend.
• 30708 – Extension, 1/2" Drive, Locking.
• 87682 – Support Bar (2).
Specifications
• Pipe Capacity
–1
1/4" – 6" Schedule 10 and Schedule 40 Steel, Aluminum, and PVC Pipe
–1
1/4" – 6" Schedule 10
–1
1/4" – 2" Schedule 40 Stainless Steel Pipe
–1/2" – 4" Schedule 80 PVC Pipe
– With Roll Change 2" – 8" Copper Tube (Type K, L, M, and DWV)
• Depth Adjustment – Adjusting screw and integral, index depth gauge.
• Actuation – Feed screw with 1/2" ratchet wrench (included) or any 15/16" hex.
• Power Drive Mounting – RIDGID 300 Power Drive 38/57 RPM (Reverse Direction
Only).
Catalog
No. Model No. Description Weight
lb. kg
25638 975 975 Combo Roll Groover 26.1 11.9
32828 975 975 Combo Roll Groover for Use with Copper Tube 26.1 11.9
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
32833 975 Roll Set Kit for 2" - 8" Copper Tube 5.0 2.3
67662 -Adapter Bracket for 300 PD Version of 916 Roll Groover 30.0 13.6
41855 300 Only 300 Power Drive,115V 50/60Hz 94.0 43.0
75075 300 Only 300 Power Drive,115V 50/60Hz 94.0 43.0
42360 1206 1206 Stand 31.0 14.1
36273 460-6 Portable TRISTAND®Chain Vise 42.8 19.4
36278 460-12 Portable TRISTAND®Chain Vise 60.8 27.6
16703 425 Portable TRISTAND®Chain Vise 32.0 14.5
56662 VJ-99 V Head High Pipe Stand 23.0 10.4
22168 VF-99 V Head High Folding Pipe Stand 24.0 10.9
76822 -Inch Diameter Tape 0.5 0.1
76827 -Metric Diameter Tape 0.5 0.1
30703 -Ratchet, 1/2" Drive With 90° Bend 1.7 0.8
30708 -Extension, 1/2" Drive,Locking 0.5 0.1
Combo Roll Groovers
5.5
ROLL GROOVING
Power-Driven 916 Roll Groover
• The RIDGID Model 916 Roll Groover is the most durable and efcient lightweight
portable unit available. Built with a solid, durable cast-iron housing, it with-
stands heavy usage, yet is light enough for easy transportation. The 916 features
a patented single stroke feed mechanism that allows for accurate operation
quickly and effortlessly.
• Specically designed for eld service roll grooving applications.
• Quick and easy mount to RIDGID Nos. 300 Power Drive, 535 or 1822 Threading
Machines.
• Cam-type feed actuation – translates into minimum operator effort to form roll
grooves.
• Depth adjustment screw separate from feed mechanism allows for consistent
groove depth.
• Lightweight, only 33 lbs., allows for easy transport and storage.
• Integral feed handle is part of overall unit. No extra tools required.
• Optional Roll Sets for: Copper 2"- 6" (Types K, L, M, DWV), 1" Sch. 10, 40 steel
pipe.
• Optional 11/4"-11/2" and 2"- 6" AWWA Roll Sets.
• Easy serviceability – drive and groove rolls are easy to change.
Standard Equipment
• 45397 – SHAFT, ASM DRIVE 916.
• 45587 – ROLL, GROOVE W/BEARING.
Specifications
• Capacity – 11/4" - 6" Sch. 10 Steel, Stainless Steel.
•11/4" - 3" Sch. 40 Steel , Stainless Steel.
• Optional 2" - 6" Copper (Type K, L, M, DWV).
• Optional 1" Sch. 10, 40 Steel Pipe.
•11/4"-1
1/2" and 2" - 6" AWWA Roll Sets.)
Catalog
No.
Model
No. Description Weight
lb. kg
45007 916 Roll Groover for 300 Power Drive 33 15.0
46852 916 Roll Groover for Copper Tubing for 300 Power Drive 34 15.5
60382 916 Roll Groover for 535 33 15.0
48307 916 Roll Groover for 1822 33 15.0
Power Roll Groovers
Accessories
Catalog
No. Description Weight
lb. kg
45347 Roll Set for 1" Sch. 10,40 6 2.6
45352 Roll Set for Copper (optional) 6 2.6
69667 Roll Set for 1¼"-11/2" AWWA (optional) 6 2.6
69692 Roll Set for 2"-6" AWWA (optional) 6 2.6
67662 Adapter Bracket for 300 PD Version of 916 Roll Groover 30 13.6
76822 Inch Diameter Tape 1/20.1
76827 Metric Diameter Tape 1/20.1
Note: A Roll Set consists of a Groove Roll and a Drive Roll.
ROLL GROOVING
5.6
918 Roll Groover
The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in
a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal
groover for job site requirements. The 918 mounts quickly to RIDGID 300 power drive, 535,
1822, or 1224 Threading Machines. Designed to provide maximum efciency, the 918 is
capable of grooving up to 12" Schedule 10 and 8" Schedule 40 standard wall pipes. Roll Set
changeout is accomplished in seconds.
• Compact lightweight design allows for easy transport.
• Extensive grooving capacity for a wide range of applications.
• Rugged, durable housing enables unit to withstand harsh use.
• Two-stage pump plus 15 ton ram permit quick and smooth operation.
• Quick easy set-up.
• Easy rollset changeout.
• Specically designed groove and drive rolls product consistent, accurate grooves through-
out the capacity range.
Standard Equipment
• 48405 – Roll Set for 8"-12" Sch 10 (8" Sch 40) With Carry Case.
• 49217 – Groove Roll 2" - 6".
• 51432 – Drive Roll 2" - 6".
• 53987 – Roll Storage Case.
• 29087 – T Handle hex key 1/8".
• 54317 – Box Wrench.
Specifications
• Capacity
– 1" - 12" Sch. 10 Steel, Stainless Steel.
– 1" - 12" Sch. 10 Steel, Stainless Steel.
– 1" - 8" Sch 40 Steel, PVC.
– 1" - 2" Sch 40 Stainless Steel.
– 2" - 6" Copper (Type K, L, M, & DWV).
–2
1/2" - 4" Sch 80 PVC.
Catalog No. Model
No. Description Weight
lb. kg
48297 918-1 918 Roll Groover w/300 Power Drive Mount Kit 104 47.2
48377 918-2 918 Roll Groover w/1822 Power Drive Mount Kit 134 60.9
48382 918-4 918 Roll Groover w/1224 Carriage Mount Kit 131 59.5
48387 918-5 918 Roll Groover w/535 Carriage Mount Kit 117 53.1
47222 918 only 918 Roll Groover Only 95 43.1
Power Roll Groovers
Mounting Kit Only
Catalog No. Model
No. Description Weight
lb. kg
48292 911 300 Power Drive Mount Kit Only 94.0
48392 912 1822 Carriage Mount Kit Only 39 17.7
48397 914 1224 Carriage Mount Kit Only 36 16.4
48402 915 535 Carriage Mount Kit Only 22 10.0
Accessories
Catalog No. Description Weight
lb. kg
48405 Roll Set for 8"-12" Sch 10 (8" Sch 40) With Carry Case 18 8.2
48407 Roll Set for 11/4"-11/2" Sch 10/40 With Carry Case 10 4.5
48412 Roll Set for 1" Sch 10/40 and 11/4"-11/2" Sch 10/40 with Carry Case 20 9.0
48417 Roll Set for 2"-6" Copper 10 4.5
59992 1"-12" Stabilizer for Grooving Nipples 11 5.0
49662 Tool Box 52.0
76822 Inch Diameter Tape 1/20.1
76827 Metric Diameter Tape 1/20.1
Note: A Roll Set consists of a Groove Roll and a Drive Roll
Note: Do not use to groove 8" schedule 40 steel pipe harder than 150 Brinnel.
5.7
ROLL GROOVING
918-I Roll Groover
The RIDGID Model 918-I Roll Grooving Machine is capable of grooving 1" to 8" schedule 40
and 1" to 12" schedule 10 pipe faster than any roll grooving machine in its class. Powered
by a 1.2 HP universal motor and heavy duty transmission, the 918-I produces high quality
grooves consistently and effortlessly. The 918-I comes standard with a rugged wheel stand
built for mobility in the shop without compromising stability. The stand’s tray is tough enough
to support 200 lbs. The 918-I uses a custom-designed, two-stage hydraulic pump that
minimizes pipe are, operator fatigue and hydraulic uid leaks.
• Fastest roll groove time in its class. (See roll groove time chart below.)
• Offers maximum versatility in roll grooving capacities (see specications below).
• Custom engineered 2-stage, 15-ton hydraulic pump and ram eases grooving and reduces
are and operator’s fatigue.
• Produces consistent, high quality roll grooves.
• 115V approved by CSA to CSA and UL standards.
Standard Equipment
• 36642 – Footswitch, ASM.
• 48405 – Roll Set for 8"-12" Sch 10 (8" Sch 40) With Carry Case.
• 49217 – Groove Roll 2" - 6".
• 51432 – Drive Roll 2" - 6".
• 59992 – 1"-12" Stabilizer for Grooving Nipples.
• 64192 – Stand, ASM 918I.
• 49087 – T-Handle Hex Key, 1/8".
• 54317 – Box Wrench.
• 67192 – Spanner Wrench.
• 67197 – Hex Key 3/8".
• 53987 – Roll Storage Case.
Specifications
• Capacity
– 1" - 12" Sch 10 Steel
– 1" - 8" Sch 40 Steel
– 2" - 6" Copper (types K, L, M & DWV)
–1
1/2", 21/2" - 4" Sch 80 PVC
• Motor – Universal 1/2HP
• Motor Control – On/Off Heavy-Duty with Foot Switch
• Speed: – 45 RPM (No Load)
Catalog No. Model No. Description Voltage Weight
V lb. kg
64977 918-I Roll Grooving Machine Complete 115 185 84.1
65902 918-I Roll Grooving Machine Complete. (Export Only) 230 185 84.1
Power Roll Groovers
Accessories
Catalog No. Description Weight
lb. kg
48405 Roll Set for 8"-12" Sch 10 (8" Sch 40) With Carry Case 18 8.2
48407 Roll Set for 11/4"-11/2" Sch 10/40 With Carry Case 10 4.5
48412 Roll Set for 1" Sch 10/40 and 11/4"-11/2" Sch 10/40 with Carry Case 20 9.0
48417 Roll Set for 2"-6" Copper 10 4.5
59992 1"-12" Stabilizer for Grooving Nipples 11 5.0
76822 Inch Diameter Tape 1/20.1
76827 Metric Diameter Tape 1/20.1
Note: A Roll Set consists of a Groove Roll and a Drive Roll
Note: Do not use to groove 8" schedule 40 steel pipe harder than 150 Brinnel.
ROLL GROOVE TIME
PIPE SIZE
100
SEC
75
SEC
50
SEC
25
SEC
0
SEC
RIDGID
1.2 HP
918-1
COMP.
.75 HP
GROOVER
2’’ SCHEDULE 10 6’’ SCHEDULE 40
TIME TO GROOVE
RIDGID
1.2 HP
918-1
COMP.
.75 HP
GROOVER
ROLL GROOVING
5.8
920 Roll Groover
The RIDGID 920 Roll Groover takes grooving to a whole new level. With a capacity range
of 2"-24" diameter pipe, the 920 has the largest capacity of any RIDGID roll groover. The
920 mounts to the RIDGID 300 Power Drive for use in the eld or shop. Also available is
the RJ624 Large Diameter Pipe Support for grooving pipe up to 24" in diameter, a perfect
complement to the 920 Roll Groover.
• Largest grooving capacity in its class.
• Transportation Mode – Detachable Wheels enable one man to easily move the 920 around
a jobsite. Also available is a Model No. 32 Transporter.
• Patented Depth Setting Gauge – Easy and accurate groove depth setting does not require
adjusting the protective guarding.
• Built-in Pressure Gauge – Helps operator monitor hydraulic pressure to control are and
optimize groove time.
• Front Roll Set Change-Out – User can switch groove roll sets quickly and easily.
• Easy Adjust Support Legs – Helpful when leveling the groover on uneven ground.
Standard Equipment
• 42575 – #32 Transporter (for Power Drives and Tristand Vises).
• 920 Training Video And User Manual.
• 10843 – Set of Rolls 2-6" 920.
• 10848 – Set of Rolls 8-12" 920.
• 10853 – Set of Rolls 14-16" 920.
Specifications
• Capacity
– 2" -12" Sch 5, 10, & 40 Steel, Stainless Steel, Aluminum*
–14"-16"Sch5&10Steel, Stainless Steel, Aluminum
– 18" - 24" .250 Wall Steel, Stainless Steel, Aluminum
– 2" - 8" Sch 40 PVC
–2
1/2" - 4 Sch 80 PVC
– 2" - 8" Copper (K & L)
–2
1/2" - 8" Copper (K, L, & M)
– 3" - 8" Copper (DWV)
Catalog
No.
Model
No. Description Weight
lb. kg
95782 920 920 Roll Groover with 2"- 6" Sch. 40,8"-12" Sch. 40 and 14"-16" Std.
Wall Roll Sets 199 90.30
Power Roll Groovers
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
42575 32 #32 Transporter (for Power Drives and Tristand Vises) 141/46.50
76822 -Inch Diameter Tape 1/20.10
76827 -Metric Diameter Tape 1/20.10
96372 RJ624 RJ624 Large Diameter Pipe Stand 167 75.70
96982 -Drive and Groove Roll Set for 2" - 8" Copper Tube Type K,L,M,and DMV 20 9.00
96987 -Drive and Groove Roll Set for 18" - 20" Sch. 10 Steel or Stainless Steel 21 9.50
96992 -Drive and Groove Roll Set for 22" - 24" Sch. 10 Steel or Stainless Steel 22 10.00
96997 -Drive and Groove Roll Set for 4" - 6" Sch. 40 Steel or Stainless Steel 20 9.00
6.1
CUTTING & DRILLING
Cutting & Drilling
• Wide selection from a single source.
• Durable designs.
______________________________________________________________________
Type No. of Models Nom. Size (in.) Page
Hole Cutting
Model HC300 3 Up to 3 6.2
Model HC450 4 Up to 43⁄46.3
Hole Saw Arbors 11 Up to 5⁄86.4
Hole Saw Kits 3 – 6.4
Hole Saws 51 Up to 6 6.5
Reciprocating
Saw Blades 14 3 - 12 6.6
Core Drilling
Core Drill Bits 26 ½ - 14 6.7
Tapping Tools
RT1000 2 5⁄8-7⁄86.8
RT3422 1 5⁄8-1
3⁄46.9
CUTTING & DRILLING
6.2
HC300 Hole Cutting Tool
The RIDGID Model HC300 Hole Cutting Tool is designed to cut holes up to 3" (76 mm)
diameter into steel pipe. The multiple hole size allows the use of ttings such as Mechani-
cal T®, Vic-O-Let™, Weld-O-Let™ and others for branching unpressurized pipelines. The
HC300 features a 1/2" (13 mm) capacity chuck to accommodate all sizes of holes up to 3" (76
mm) diameter and standard hole saw arbors up to 7/16" (11 mm). An integral motor and gear
reduction optimizes the performance and saw life in the capacity range. A single-feed handle
and ON/OFF switch allows for easy operation. The compact two-piece design allows the
HC300 to be used in tight quarters and difcult-to-reach locations. The Model HC300 offers
great features that translate into unparalleled eld and shop performance.
•Quick Connecting Two-piece Design. This unique design allows for easy mounting
transport and set up. In addition, weighing only 31 lbs. (14 kg), the unit can be broken
down into two lighter weight units for maximum transport and operation comfort. This is
particularly useful when working off a ladder or overhead.
•Single-Hand Chain Latching. The Model HC300 features a patented springloaded chain
that saves time and signicantly aids set up and operation.
•Ergonomic Design. With all controls at the operator’s ngertips, the tool has been
designed for maximum productivity.
•High Speed. With a powerful 1.2HP, 11 amp motor, the Model HC300 delivers 360 RPM
to quickly bore holes while optimizing hole saw life.
•Horizontal and Vertical Flats. Ensures perpendicular cutting.
Standard Equipment
• 77017 – Chuck Key
Specifications
• Hole Cutting Capacity – up to 3" (76 mm).
• Pipe Diameter Mounting Range – 11/2" (38 mm) to 8" (200 mm).
• Motor – 1200 W Universal.
• Output Power – 1/2HP.
• RPM – 360 (no load).
• Chuck Size – 1/16"(1,6 mm) - 1/2" (13 mm).
• Arbors up to 7/16".
• Weight – 31 lbs.
• Height – 12.8".
• Length – 11.9".
• Width – 13.2".
• 115V approved by CSA to CSA and UL standards
Catalog
No.
Model
No. Description Weight
lb. kg
76777 HC300 3" Hole Cutting Tool 115V 31 14.0
76787 HC300 3" Hole Cutting Tool 230V 31 14.0
76792 HC300-J 3" Hole Cutting Tool 100V,50/60 Hz 31 14.0
Note: The HC300 is not a hot tapping tool.
Note: Use the R2S Arbor when drilling 1 1/4" and larger holes.
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
16671 R2S Solid Shank Arbor 1/20.2
84427 HC-450/HC-300 Carrying Case 19 8.6
77017 Chuck Key 1/40.1
Hole Cutting Tools
6.3
CUTTING & DRILLING
HC450 Hole Cutting Tool
The RIDGID Model HC450 is engineered for continuous 1/4" (6 mm) to 43/4" (120 mm) hole
cutting in and up to 8" (203 mm) diameter steel unpressurized pipe. The built-in level ensures
line up for multiple holes when branching lines using Mechanical T, Vic-O-Let ttings or
welded saddles. The HC450 is ideal for mechanical, industrial maintenance and re protec-
tion contractors since it cuts holes into a wide variety of pipe materials. No off-the-shelf
drill-based hole cutter compares in performance or durability to the rugged purposed-built
Model 450.
• Engineered for continuous dry or oiled hole cutting.
• Dual-side controls provide easy operation.
• GFCI and a built-in breaker for operator protection.
• Chuck accommodates 1/8" (3 mm) to 5/8" (16 mm) arbors.
• Two carrying handles ease mounting and alignment.
• Built-in level for multiple hole alignment.
Standard Equipment
• 59502 – 5/8" Arbor only for Hole Saws.
• 59132 – Chuck Key.
Specifications
• Hole Cutting Capacity – up to 43/4" (Sch 10, 40 and 80 Pipe Dia.)
• Pipe Diameter Mounting Range – 11/4"to8".
• Motor – Universal, 115V 25-60Hz 13 amp, 1.2 HP, UL/CSA listed.
• RPM – 110 (no load).
• Chuck Size – 5/8".
• Weight – 42 lbs.
• Height – 111/2".
• Length – 17".
• Width – 17".
• 115V approved by CSA to CSA and UL standards
Catalog
No.
Model
No. Description Weight
lb. kg
57592 HC450 43/4" Hole Cutting Tool 110V,50/60 Hhz 42 19.0
57597 HC450 43/4" Hole Cutting Tool 220V,50/60 Hhz 42 19.0
25668 HC450 43/4" (120 mm) Hole Cutting Tool 115V 42 19.0
Note: The HC450 is not a hot tapping tool.
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
84427 -HC-450/HC-300 Carrying Case 19 8.6
59502 R4 5/8" Arbor only for Hole Saws 1/40.1
59132 -Chuck Key 1/40.1
Hole Cutting Tools
CUTTING & DRILLING
6.4
Hole Saw Arbors
Hole saw arbors with high-speed pilot drills are built for use with portable drills and drill
presses. The saws are quickly replaced without tools and without removing the arbor from
the chuck.
Catalog
No.
Model
No. Chuck Fits Saw Nos. Shank Size Weight
in. mm lb. kg
53065 R0 1/4",3/8" (6,10 mm) M 14-M30 1/861/40.1
53070 R1 1/2"(12mm) M14-M30 3/811 1/40.1
53075 R2 1/2" (12 mm) M32-M152 3/811 1/20.2
53080 R3 5/8" (15 mm) M32-M152 1/216 1/20.2
81505 D-969 12" arbor extension for
7/16" shank arbors - - - 1 0.4
16671 R2S 1/2" (12 mm) M32-M152 3/811 1/20.2
53085 -1/4" replacement pilot
drill w/slotted shank ---
1/40.1
59502 R4 5/8" (15 mm) ---
1/40.1
Hole Saw Kits
Plumber's, electrician's and combination kits each contain a selection of RIDGID hole saws
and hole saw arbors for cutting through wood, steel, cast iron, brass and aluminum.
Catalog
No.
Model
No. Description Weight
lb. kg
81490 1248 Plumber Kit 33/81.50
81495 1249 Electrician Kit 33/81.50
81500 1250 Combination Kit 61/82.80
Hole Saws
Kits
Catalog
No.
Model
No. Description 3⁄4"
19 mm
7⁄8"
22 mm
11⁄8"
29 mm
13⁄8"
35 mm
11⁄2"
38 mm
13⁄4"
44 mm
2"
51 mm
21⁄4"
57 mm
21⁄2"
64 mm
25⁄8"
67 mm
Arbors Weight
R0 R1 R2 lb. kg
81490 1248 Plumber Kit • • • •••••3
3⁄81.5
81495 1249 Electrician Kit • • • • • • • • 33⁄81.5
81500 1250 Combination Kit ••••••••• •••6
1⁄82.8
6.5
CUTTING & DRILLING
Variable Pitch Hole Saws
Outperform and outlast traditional standard pitch models. Bi-metal construction with teeth
made from specially hardened type M3 high speed steel. The varying teeth height and gullet
sizes result in much faster cutting and longer life. For wood; mild, tool and stainless steels;
cast iron; brass and aluminum. 51 sizes from 9/16" (14mm) to 6" (152mm).
• Depth of cut: 11/2" (38 mm).
• Bi-metal construction.
• M 3 HSS Cutting edge.
•3
/5TPI Variable pitch.
• Positive tooth rake.
• NOTE: Use RIDGID Thread Cutting Oil on all metal except cast iron.
Catalog
No.
Model
No.
Saw Size &
Hole Diameter
Nominal
Pipe Sizes (in.)
Nominal
Pipe Sizes (mm)
in. mm Tap Drill Size Body Drill Size Tap Drill Size Body Drill Size
52755 M14 9⁄16 14 -- - -
52760 M16 5⁄816 -- - -
52765 M17 11⁄16 17 -- - -
52770 M19 3⁄419 -3⁄8-10
52775 M21 13⁄16 21 -- - -
52780 M22 7⁄822 3⁄41⁄220 12
52785 M24 15⁄16 24 -- - -
52790 M25 1 25 -- - -
52795 M27 11⁄16 27 -- - -
52800 M29 11⁄829 1 3⁄425 20
52805 M30 13⁄16 30 -- - -
52810 M32 11⁄432 -- - -
52815 M33 15⁄16 33 -- - -
52820 M35 13⁄835 -1-25
52825 M37 17⁄16 37 -- - -
52830 M38 11⁄238 11⁄4-32 -
52835 M40 19⁄16 40 -- - -
52840 M41 15⁄841 -- - -
52845 M43 111⁄16 43 -- - -
52850 M44 13⁄444 11⁄211⁄440 32
52855 M46 113⁄16 46 -- - -
52860 M48 17⁄848 -- - -
52865 M51 2 51 -11⁄2-40
52870 M52 21⁄16 52 -- - -
52875 M54 21⁄854 -- - -
52880 M57 21⁄457 2 -50 -
52885 M59 25⁄16 59 -- - -
52890 M60 23⁄860 -- - -
52895 M64 21⁄264 -2-50
52900 M65 29⁄16 65 -- - -
52905 M67 25⁄867 -- - -
52910 M70 23⁄470 -- - -
52915 M73 27⁄873 -- - -
52920 M76 3 76 -21⁄2-64
52925 M79 31⁄879 -- - -
52930 M83 31⁄483 3 -75 -
52935 M86 33⁄886 -- - -
52940 M89 31⁄289 -- - -
52945 M92 35⁄892 -3-75
52950 M95 33⁄495 31⁄2-90 -
52955 M98 37⁄898 -- - -
52960 M102 4 102 -- - -
52965 M105 41⁄8105 -31⁄2-90
52970 M108 41⁄4108 -- - -
52975 M110 43⁄8110 -- - -
52980 M114 41⁄2114 -4--
52985 M121 43⁄4121 -- - -
52990 M127 5 127 -- - -
52995 M140 51⁄2140 -- - -
53000 M152 6 152 -- - -
Note: All weights are under 11⁄2lbs. (0.68 kg).
Hole Saws
CUTTING & DRILLING
6.6
Reciprocating Saw Blades
Reciprocating Saw Blades
High quality blades for every application. Available in carbon, or bi metal consisting of a high-speed
steel cutting edge welded to a exible alloy steel back for wood or metal cutting. RIDGID blades will
t in all reciprocating saws and are packed in plastic sleeves with ve (5) blades or fty (50) blades.
Catalog
No.
Model
No.
Length Width Gauge TPI Std.
Pack Recommended Use
in. mm in. mm in. mm
80520 D-988 3 75 5/16 80.035 0.9 18 5 Scroll cuts in wood and cast aluminum,non-ferrous metals.
80500 D-984 4 100 3/420 0.035 0.9 14 5 Heavy gauge metals1/8" thick and above. Barstock and angles.
80480 D-980 4 100 3/420 0.035 0.9 18 5 Heavy gauge metals of 18 gauge to1/8" thick conduit,pipe,channels,and tubing.
80485 D-981 4 100 3/420 0.035 0.9 24 5 Metal cutting 18 gauge and under. Trim,tubing,and galvanized pipe.
56892 D-993 6 150 3/420 0.035 0.9 10 5 Wood,nail-embedded wood,compositions,plastic,cast aluminum,and non-ferrous metals.
80505 D-985 6 150 3/420 0.035 0.9 14 5 Heavy gauge metals1/8" thick and above. Barstock and angles.
95872 DP-985 6 150 3/420 0.035 0.9 14 50 Heavy gauge metals1/8" thick and above. Barstock and angles.
80510 D-986 6 150 3/420 0.035 0.9 18 5 Heavy gauge metals of 18 gauge to1/8" thick conduit,pipe,channels,and tubing.
95877 DDP-986 6 150 3/420 0.035 0.9 18 50 Heavy gauge metals of 18 gauge to1/8" thick conduit,pipe,channels,and tubing.
80515 D-987 6 150 3/420 0.035 0.9 24 5 Metal cutting 18 gauge and under. Trim,tubing,and galvanized pipe.
47082 D-989 6 150 3/420 0.050 1.3 6 5 General rough-in,all woods,nail-embedded woods.
56897 D-994 8200 3/420 0.035 0.9 10 5 All woods,composition,plastic,nail-embedded wood,cast aluminum,light metal.
51022 D-992 9 225 3/420 0.050 1.3 6 5 General rough-in,all woods,nail-embedded woods.
47087 D-990 12 300 3/420 0.050 1.3 6 5 General rough-in,all woods,nail embedded woods.
96032 0979 12 300 7
⁄822 0.062 1.6 6 3 Demolition blade! All wood, metal, nail-embedded wood.
6.7
CUTTING & DRILLING
Core Drill Bits
All RIDGID segmented diamond drill bits are laser welded for superior strength.
Three times stronger than conventional brazed bits. RIDGID core bits are available
in 2 styles: Premium Red and High Speed Premium Red. Premium Red core bits
are heavy-duty, multi-purpose bits for drilling in many types of materials including
reinforced concrete, cinder block, stone, etc. High Speed Premium Red core bits
are specially designed for high speed drilling. Unique diamond segment design can
increase drilling speed as much as 30% over conventional bits.
Catalog No. Bit Diameter Weight
in. lb. kg
98170 1/2*1.10 0.5
98175 5/8*1.15 0.5
98180 3/4*1.19 0.5
98185 7/8*1.50 0.7
98190 1* 2.00 0.9
98195 11/4*2.60 1.2
98200 11/2*3.20 1.5
98205 13/43.55 1.6
98210 2 4.05 1.8
98215 21/44.25 1.9
98220 21/25.00 2.3
98225 23/45.50 2.3
98230 3 6.00 2.7
98235 31/26.50 2.9
98240 4 8.00 3.6
98250 5 11.50 5.2
98255 51/213.25 6.0
98260 6 14.00 6.4
98265 61/215.25 6.9
98270 7 16.00 7.5
98275 822.00 10.0
98280 9 24.25 11.0
98290 12 41.25 18.7
98295 14 60.50 27.4
Note: All Diameters Are Nominal, Core Length is 12"
*Requires Adapter No. 98715
High Speed Premium Red
Catalog No. Bit Diameter Weight
in. lb. kg
51507 2 4.05 1.8
51512 21/25.00 2.5
51517 3 6.00 2.7
51522 31/26.50 2.9
51527 4 8.00 3.6
51537 5 11.50 5.2
51542 6 14.00 6.4
51547 822.00 10.0
51557 12 41.25 18.7
Bit Extension Rods and Adapters
Item
No. Catalog No. Length Fits Bit
Size Thread Weight
in. in. in. lb. kg
1 98700 413/411/4-7 2
1/41.0
2 98705 613/411/4-7 3
1/41.8
3 98710 12 13/411/4-7 6
1/42.8
4 98690 61-1
1/25/8-11 1
1/40.6
5 98695 12 1-1
1/25/8-11 2 0.9
6 98715 ---11/40.6
7 98720 ---11/4-0.7
Core Drill Bits
Core Bits High Speed Premium Red
1
2
3
4
5
6
7
Bit Extension Rods & Adapters
CUTTING & DRILLING
6.8
RT1000 Tapping Tool
The Model RT1000 Mini Tapping Tool is ideal for branching pressurized water lines.
With 1" tapping capacity and the ability to drill into most pipe materials, the lightweight
compact and corrosion-resistant design of the RT1000 is the perfect tool for branching
pressurized pipe when system shut down is out of the question.
• Compact and lightweight, the tool is great for tight quarters and awkward locations.
• Sturdy machined construction and corrosion-resistant materials combine to provide
dependable lifelong operation.
• Independent cutter feed mechanism gives the operator full control of drilling to
optimize cutter performance and service life.
• Taps steel, cast iron, ductile iron and plastic pipe.
• Coupon retaining bits give you the condence that the coupon will not be dropped
in the pipe, preventing medium contamination or possible damage of downstream
equipment.
Standard Equipment
• 83317 – 3/4" CTS Adapter.
• 83322 – 1" CTS Adapter.
• 76047 – Small Shaft Extension for 5/8"-1
3/16" Hole Saws.
• 76037 – Small Arbor for 5/8"-1
3/16" Hole Saws.
• 76027 – Coupon Retaining 1/4" Pilot.
• 76022 – 11/16" Ratchet Wrench.
• 31400 – Spud Wrench.
• 83307 – RT 1000 Tool Box.
Specifications
• Tapping Capacity – 3/4- 1".
• Mounting – Saddle, Welded Nipple, Weld-o-let®, Thread-o-let®.
• Activation – Hand Ratchet, Air Ratchet, Right angle Drill.
• Cutter Feed – Rotation of sleeve around an Acme threaded barrel.
• Pressure – Water, 150 psig @ 100°F.
• Steam, Air – 100 psig @ 370°F.
Catalog
No. Model No. Description Weight
lb. kg
83567 RT1000 RT1000 Tapping Tool CTS Set 16.0 7.3
83302 RT1000 RT1000 Tapping Tool Only 6.0 2.9
Note: CTS = copper Tube Size. NPTM/NPTF = National Pipe Thread Male/Female
Accessories
Catalog
No. Model No. Description Weight
lb. kg
76022 -11/16" Ratchet Wrench 2.0 0.4
83307 - RT 1000 Tool Box 7.0 3.0
83317 -3/4" CTS Adapter 0.3 0.2
83322 - 1" CTS Adapter 0.3 0.2
83327 -3/4" Mueller®110 Compression Adapter 0.5 0.2
83337 -3/4" NPTM Adapter 0.3 0.2
83347 - 1" NPTM Adapter 0.3 0.2
83572 - 1" Mueller 110 Compression Adapter 0.5 0.2
Tapping Tools
Cutters
Catalog
No. Model No. Diameter Type
in.
52760 M16 5/8Bi-Metal
52780 M22 7/8Bi-Metal
76267 -5/8Steel Shell
76272 -7/8Steel Shell
76292 -5/8CI/DI Bit*
76297 -7/8CI/DI Bit*
76317 -5/8Plastic Shell
76322 -7/8Plastic Shell
*CI/DI = Cast Iron/Ductile Iron
6.9
CUTTING & DRILLING
RT3422 Tapping Tool
The Model RT3422 is designed for branching pressurized water, steam and natural
gas mains. With up to 2" capacity, corrosion-proof design, ability to handle most
types of material and lightweight, the Model RT3422 is the tool to meet your tap-
ping needs.
• Easy to use. At only 21", this lightweight and compact tool is great for tight
quarters and awkward locations.
• Heavy-Duty Design. Sturdy machined, corrosion-resistant materials for depend-
able lifelong benets.
• Built-in bleed valve. Allows for easy purge of chips.
• Independent cutter feed gives the operator total independent control of the cut-
ter feed rotation for optimal saw life.
• Taps a variety of materials. The RT3422 is capable of tapping into steel, cast
iron, ductile iron and plastic pipe.
• Versatility. TheRT3422 is capable of tapping mains of water up to 500 psig and
steam, air, and natural gas up to 150 psig.
• Coupon retaining bits. Exclusive pilot bits give you the condence that the
coupon will not be dropped in the pipe, preventing medium contamination or
possible damage of downstream equipment.
Standard Equipment
The RT3422 sets include RT3422 tapping tool with bleed valve, shaft extensions,
heavy-duty hole saw arbors, 1⁄4" and 3⁄8" coupon retaining pilot bits, ratchet wrench,
(2) spud wrenches, and 5 valve adapters in a steel tool box. Cutters are available
separately.
Specifications
• Tapping Capacity – 3/4- 2".
• Mounting – Saddle, Welded Nipple, Weld-o-let®, Thread-o-let®.
• Cutter Travel – 14".
• Activation – Hand Ratchet, Air Ratchet, Right Angle Drill.
• Cutter Feed – Rotation of sleeve around an Acme threaded barrel.
• Pressure – Water, 500 psig @ 100°F, Steam, Air and Natural Gas, 150 psig @ 370°F
Catalog
No.
Model
No. Description Weight
lb. kg
75982 RT3422 Tapping Machine Only 16 7.30
75992 RT3422 3/4" - 2 NPT Set (Male) 53 2.90
91192 RT3422 3/4" - 2" CTS Set (Flared) 48 3.00
Tapping Tools
Cutters
Catalog
No.
Model
No.
Diameter Type
in.
52760 M16 5/8Bi-Metal
52780 M22 7/8Bi-Metal
52800 M29 11/8Bi-Metal
52820 M35 13/8Bi-Metal
52850 M44 13/4Bi-Metal
76267 -5/8Steel Shell
76272 -7/8Steel Shell
76292 -5/8CI/DI Bit
76297 -7/8CI/DI Bit
76317 -5/8Plastic Shell
76322 -7/8Plastic Shell
Cutters
Catalog
No.
Model
No.
Diameter Type
in.
76292 - 11/8Steel Shell
76297 - 13/8Steel Shell
76302 M29 11/8CI/DI Shell
76307 M35 13/8CI/DI Shell
76312 M44 13/4CI/DI Shell
76317 - 5/8Plastic Shell
76322 - 7/8Plastic Shell
76327 - 11/8Plastic Shell
76332 -1
3/8Plastic Shell
76337 -1
3/4Plastic Shell
Note: Cutter diameter is 1/8-1/4" smaller than the
diameter of the hole being cut.
Accessories
Catalog
No. Description
76022 11/16" Ratchet Wrench
76017 RT 3422 Tool Box
Pilots
Catalog
No. Description
76027 Coupon Retaining 1/4" Pilot
76032 Coupon Retaining 3/8" Pilot
Hole Saw Arbors
Catalog
No. Description
76037 Small Arbor for 5/8"-1
3/16" Hole Saws
76042 Large Arbor for 15/16"-1
3/4" Hole Saws
Shaft Extensions
Catalog
No. Description
76047 Small Shaft Extension for 5/8"-1
3/16" Hole
Saws
76052 Large Shaft Extension for 1 5/16"-1
3/4"
Hole Saws
Valve Adapters
Catalog
No. Description
76057 CTS 3/4" Female
76067 CTS 1" Female
76072 CTS 11/4" Female
76077 CTS 11/2" Female
76082 CTS 2" Female
76132 NPT 3/4" Male
76137 NPT 1" Male
76142 NPT 11/4" Male
76147 NPT 11/2" Male
76152 NPT 2" Male
83997 3/4" Mueller 110
84002 1" Mueller 110
84007 11/2" Mueller 110
84012 2" Mueller 110
NPT Sets available only with steel, male valve adapters
RIDGE TOOL COMPANY
7.1
GENERAL PURPOSE HAND TOOLS
General Purpose Hand Tools
• Wide selection of accessory tools & equipment.
• Proven durable designs.
______________________________________________________________________
Type No. of Models Page
Bench Vises 5 7.2 - 7.3
Anvils 3 7.3
Levels 6 7.4
Hammers 10 7.5
Saws 2 7.6
Saw Blades 4 7.6
Tool Box 1 7.7
Folding Rulers 4 7.7
Tape Measures 2 7.8
Multi-Purpose Screwdriver 1 7.8
Pliers 5 7.9
Snips 5 7.9
Knockout Sets 7 7.10 - 7.11
Bolt Cutter 6 7.11
Cable Cutters 1 7.12
Cable Trimmer 1 7.12
Shovels 7 7.13
Screw Extractors 12 7.14 - 7.15
Replacement Drill Guides 10 7.15
Twist Drills 9 7.15
GENERAL PURPOSE HAND TOOLS
7.2
F-Series Vises
• The F-Series vises are constructed of 75,000 psi tensile strength forged
steel. These sleek, rugged vises out perform their bulky cast-iron competi-
tion. RIDGID®F-Series vises feature a patented parallel jaw alignment
system. This exclusive feature gives the F-Series precise clamping action,
as well as longer service life.
• Model F-Series vices feature a parallel jaw alignment system. This exclu-
sive feature gives the F-Series precise clamping action, as well as longer
service life.
• All-steel, drop-forged construction.
• Rolled double lead Acme screw.
• Steel handle with rubber anti-pinch rings.
• Increased work areas.
• Standard xed pipe jaws.
• Large, hardened anvil.
• Surface hardened slides for smooth, precise operation.
• Forged steel swivel base with dual draw-down bolts.
• RIDGID Lifetime Warranty.
Catalog
No.
Model
No. Description Weight
lb. kg
66987 F-45 41/2" Forged Vise 26 11.90
66992 F-50 5" Forged Vise 48 21.60
66997 F-60 6" Forged Vise 63 28.60
Vises
Infinitely adjustable swivel base
allows vise to lock securely in
any position
Large capacity pipe jaws
for secure clamping
Generously sized jaws provide
greater clamping surface
Accessories
Catalog
No. Model No. Description Weight
lb. kg
69907 F-45 Swivel Base Assembly 3 1.40
69912 F-50 & F-60 Swivel Base Assembly 6 2.80
Aluminum Magnetic Jaw Covers
Fiber Magnetic Jaw Covers
Soft-Faced Magnetic Jaw Covers
7.3
GENERAL PURPOSE HAND TOOLS
XF45 and XF50 Quick Acting Vises
The RIDGID®XF45 and XF50 combines the strength and durability of forged
steel, with the time and effort savings of a Quick Action Trigger. These vises are
the only forged steel bench vises on the market with this Quick Action. Tradi-
tional bench vises rely solely on hand cranks to tighten and loosen the jaws. By
just ipping the Quick Action Trigger, the jaws can easily slide into the desired
position. This trigger signicantly reduces the amount of time and effort when
working with this vise.
• Quick Action Trigger – allows you to effortlessly slide jaws in and out to eas-
ily adjust for different sized objects.
• Forged steel construction – offers superior durability and strength.
• Patented Jaw Alignment System – provides precise clamping and longer
service life.
• Large capacity forged pipe jaws – clamps pipe and rod securely.
• 360 degree forged steel swivel base – allows for an innite amount of
adjustability.
• Oversized, hardened jaws and anvil – provide greater clamping and working
surfaces.
• Steel handle with anti-pinch – rings offers increased strength and eliminates
pinches.
Catalog
No.
Model
No. Description Weight
lb. kg
26648 XF-45 41/2" Quick Acting Forged Vise 26 11.7
27848 XF-50 5" Quick Acting Forged Vise 48 21.6
Anvils
Forged Anvils
The RIDGID Peddinghaus anvil has long stood for quality and craftsmanship.
Peddinghaus anvils are drop-forged and produced entirely from high grade steel
for maximum durability. The top face is ground and induction hardened to pro-
vide a lively surface to work on. Model #12 comes equipped with a pritchel hole
to support the use of various tools. Model #12 also features an upsetting block.
Drop forged steel construction. Ground and hardened top surface.
• Available in weights from 35 kg to 125 kg.
• Models 9 and 12 have tool locating holes.
Catalog
No.
Model
No.
Width of
Face
Length of
Face
Length of
Horns Total Length Total Height Base Weight Std.
Pack
in. mm in. mm in. mm in. mm in. mm in. lb. kg
69622 5 3.75 95 8.10 205 5.30 135 18.75 476 7.87 200 6.67 x 7.67 77 35 1
69632 9 4.92 125 10.43 265 7.28 185 25.00 635 10.43 265 9.25 x 10.62 165 75 1
69642 12 5.11 130 11.81 300 8.26 210 28.35 720 12.20 310 10.62 x 13.58 275 125 1
Vises
GENERAL PURPOSE HAND TOOLS
7.4
Nightshade Torpedo Level
• Light and compact; ideal for general use and work in tight places.
• Cast Aluminum prole.
• Glow in the dark vial frames for dark areas.
• Tubular vials, 180˚ - 45˚ - 90˚.
• Three strong rare earth magnets.
• V-grooved edge to balance level on pipe.
• Large top-read level vial.
• Accuracy: 1,0mm/m.
Catalog
No.
Model
No. Description Length Body Weight Std.
Pack
in. mm in. mm lb. kg
20233 395 Night Shade 9" Torpedo Level 9 229 1 x 1 16 x 32 1/30.15 1
Aluminum Level
• Top-reading, extruded aluminum level.
• Milled top for exacting precision.
• Full-length magnetic base no. 724.
Catalog
No.
Model
No. Description Weight Std.
Pack
lb. kg
87107 724 24" Top-Read Magnetic Aluminum Level 11/80.60 1
Machined Aluminum Level
The NEW RIDGID®professional levels are designed and built to last the toughest job condi-
tions. Heavy duty structures are machined from a solid block of aluminum. These levels
provide accuracy, stability and provide the trade professional the ability to read 1/8"–1/2"
slope per foot.
Torpedo Levels
• Heavy duty with machined billet aluminum body. A rugged design that withstands tough
conditions.
• All terrain, water proof and shockproof.
• Easy-to-read, oversized vials provide view from all angles.
• Easy-to-use, includes rare earth magnets to provide stability at any angle.
Laser Level
• Five-vial laser level is 3-dimensionally aligned for accuracy in all planes.
• Laser diode lasts for 10,000 hours, operates on standard AAA batteries.
• Features extra-strength rare earth magnets, ideal for use on metal piping.
U-Shape, V-Groove Level
• U-Shape, V-Groove levels provide the best option for magnetic conduit bending and weld-
ing work.
• Designed with 16 rare earth magnets to provide maximum stability.
• Built for more readings than any level of it size: 0, 22, 30, 45, 60 and 90 degrees.
Catalog
No.
Model
No. Description Length Weight Std.
Pack
in. lb. kg
36243 400 UM 4 Vial Torpedo Level 55/80.23 0.10 1
36248 500 UM 5 Vial Torpedo Level 81/20.37 0.17 1
36253 800 LMI 5 Vial Laser Level 81/20.76 0.35 1
36258 F-10 U-Shape Level with V-Groove 21/20.26 0.12 1
Levels
7.5
GENERAL PURPOSE HAND TOOLS
Hammers
RIDGID®Hammers
RIDGID hammers feature high-quality steel heads. Individual sections are tempered steel for strength, hardness and
resiliency. Wood handles are select grain burnished hickory. Claw hammers feature impact-resistant berglass handles with
no-slip cushion grip.
Catalog
No.
Model
No. Description Overall Length Weight Std.
Pack
in. mm lb. kg
52475 116 16 oz. Curved Claw Hammer 131/4337 11/20.7 4
52480 120 20 oz. Curved Claw Hammer 131/4337 13/40.8 4
52485 216 16 oz. Ripping Claw Hammer 131/4337 11/20.7 4
52490 220 20 oz. Ripping Claw Hammer 131/4337 13/40.8 4
52450 12 12 oz. Ball Pein Hammer 13 330 11/80.6 6
52455 16 16 oz. Ball Pein Hammer 14 356 11/20.7 6
52465 24 24 oz. Ball Pein Hammer 151/2394 21/81.0 6
52470 32 32 oz. Ball Pein Hammer 16 406 23/41.3 6
52495 250 21/2lb. Short Handled Sledge 151/2394 31/41.5 4
52505 303 3 lb. Hand Drilling Hammer 10 254 31/21.6 4
Ball Pein
Hammer Ripping Claw
Hammer
Hand Drilling
Hammer Short Handle
Sledge Hammer
Curved Claw
Hammer
GENERAL PURPOSE HAND TOOLS
7.6
Model 212 Pro Arc Saw
• Designed to offer superior strength and maximum control in a lightweight professional hack
saw.
• Large tensioning knob for fast blade replacement.
• Rubberized handgrips for maximal comfort.
• Two mounting positions for the blade (45° or 90° cut angles).
Catalog
No.
Model
No. Description Blade Length Weight Std.
Pack
in. mm lb. kg
20238 212 Pro Arc Aluminum Hack Saw (includes 12" blade) 12 300 13/10 0.60 1
Model 1205 PVC/ABS Saw
Designed for cutting plastic pipe, plywood and veneers. Has an aluminum handle and 18" blade
with replacements available.
Designed for fast and accurate plastic pipe cutting.
Catalog
No.
Model
No. Description Blade Length Weight Std.
Pack
in. mm lb. kg
50522 1205 18" PVC/ABS Pipe 18 455 4/50.4 1
50532 1205-2 18" Replacement Blade f/ 1205 18 455 3/50.3 1
18" Blade standard with Model 1205-2
Saws
Bi-Metal Hack Saw Blades
Bi-Metal Blades have high-speed teeth electon-beam-welded to tough, yet exible die steel
backing to produce the best possible performance in a premium quality blade. Available in 18
TPI – 24 TPI and 300 mm length.
Catalog
No.
Model
No. Description Length Teeth Per
Inch
Weight Std.
Pack
in. mm lb. kg
93785 1218-BM Heavy Duty Applications > 3 mm 12 - 18 1/20.20 1
93790 1224-BM General Purpose Applications 12 - 24 1/20.20 1
56847 1218-BM Heavy Duty Applications > 3 mm 12 300 18 33/10 1.50 1
56852 1224-BM General Purpose Applications 12 300 24 33/10 1.50 1
7.7
GENERAL PURPOSE HAND TOOLS
No. 606 Standard Shape with Tray
• Padlock provision on catch. Heavy-duty tray with handle.
• Heavy-duty tool boxes for tradesmen’s use. Made of 18-gauge, cold-rolled prime steel. Two
heavy-duty plated trunk-type catches. Plated top handle. Electrically welded construction.
Continuous piano hinge. Durable baked red enamel nish, electrostatically sprayed.
Catalog
No.
Model
No. Description Length Width Height Weight Std.
Pack
in. mm in. mm in. mm lb. kg
33085 606 Standard Shape w/Tray 20 508 81/2216 91/2241 191/28.8 1
Folding Rules Fiberglass Folding Rules
Precision made of exible heavy-duty berglass with embedded, easy-to-read boldface
gures and graduations with red 16" stud marks and positive locking joints. Model 1602 is
graduated on one side in millimeters with red markings every 10 cm. Reverse side reads in
inches.
Catalog
No.
Model
No. Description Width Length Weight Std.
Pack
in. mm ft. m oz. g
73365 1619 6' Outside Reading 5/816 6 1.8 7 198 6
73370 1619F 6' Inside Flat Reading 5/816 6 1.8 7 198 6
73360 1620 6' Extension Rule 5/816 6 1.8 7 198 6
81280 1602 2m Metric Rule 5/816 7 2.0 7 198 6
Tool Boxes
Model 1620
Fiberglass 6' Extension Rule
with 6"Extension Slide
Model 1619F
Fiberglass 6' Inside
Flat Reading Rule
Model 1602
2m, 78 3⁄4"Rule. Inside Flat
Reading Scale in millimeters.
Outside Scale in inches
Model 1619
Fiberglass 6' Outside
Flat Reading Rule
GENERAL PURPOSE HAND TOOLS
7.8
Tape Measures
RIDGID Heavy Duty tape measures feature an innovative design incorporating a heavy duty
rubber bumper and stainless plate cover for superior durability to withstand even the toughest
jobsite conditions.
• Built-in shock bumper reducing impact when rewinding.
• Double-sided full steel hook. The slotted feature allows you to hook onto a nail.
• Stainless steel case with full surround anti-slip rubber offers more durability and comfort
while easily resisting impacts.
• Heavy-duty, 2-sided nylon-coated blade, resists abrasion and breakage.
• Superior blade-to-hook strength.
• Wide blades featuring large numbers for easier reading.
• Durable stainless steel belt clip.
• Tape Measures with Rubber Grip & Stainless Bodies Tape – Available in 16' and 25' lengths.
• Extra wide 11/16" heavy duty, 2-sided nylon coated blade, resists abrasion and breakage.
• Anti-slip rubber surround with stainless clad case, grips in the toughest conditions.
Catalog
No.
Model
No. Description Blade Width Weight Std.
Pack
in. lb. kg
20213 616 16' Tape 11/16 3/40.32 1
20218 625 25' Tape 11/16 1 0.45 1
Screwdrivers Multi-Purpose 6-in-1 Screwdriver
• Includes:.
• #1 & #2 Phillips®Tip.
•3
/16"&1/4" Flat Tip.
•5
/16"&1/4" Nut Drivers in the Shaft.
• Contoured cushioned grip for increased grip and torque.
• Ball/spring retention shaft with positive snap-t locking handle.
• Full RIDGID Lifetime Warranty.
Catalog
No.
Model
No. Description Length Weight Std.
Pack
in. mm lb. kg
16573 1974 6-in-1 Screwdriver 8 203 1/40.11 12
Tape Measures
7.9
GENERAL PURPOSE HAND TOOLS
Pliers
• Professional quality tools, precision crafted for ultimate balance, high strength and exacting
performance.
• Forged and heat-treated for extended life and durability.
• Slip Joint and Tongue and Groove pliers feature a ush rivet design which provides a stronger
tool and allows access to tighter areas.
• Cushioned grips are designed for comfort only. They are NOT intended as insulation against
electric shock.
Catalog
No.
Model
No. Description Length Weight Std.
Pack
in. mm lb. kg
62347 707 71/2" Tongue & Groove Pliers 71/2190 3/40.34 2
62352 709 91/2" Tongue & Groove Pliers 91/2241 1 0.45 2
16473 713 Tongue & Groove Pliers 13 330 11/20.88 2
62362 716 16" Tongue & Groove Pliers 16 406 23/41.24 1
80475 734 Water Pump Pliers - - 9/10 -6
Snips Snips
• All RIDGID Snips feature forged, heat-treated blades for increased quality and performance.
• Aviation Snips and Offset Snips.
• Ideal for cutting 18-gauge or lighter cold-rolled sheet steel. Compound action results in
maximum jaw power with minimum effort. Aviation snips threaded jaw bolt allows the blades
to be realigned after prolonged use.
• Metal Cutting Snips.
• Excellent for cutting sheet metal, screening, wire, leather, cloth, gasket material, rubber,
linoleum, roong material, plastics, etc. Handles designed for right-or-left hand use.
Catalog
No.
Model
No. Description Length Cut Weight Std.
Pack
in. mm in. mm lb. kg
54115 786 Snip - Cuts Right 101/2267 13/835 1 0.50 6
54120 787 Snip - Cuts Left 101/2267 13/835 1 0.50 6
54125 788 Snip - Cuts Straight 101/2267 11/238 10.50 6
16202 796 Offset Snip - Cuts Right 101/2267 11/238 10.50 6
16207 797 Offset Snip - Cuts Left 101/2267 11/238 10.50 6
Pliers
Model 797
Offset Snips (cuts left)
Model 796
Offset Snips (cuts right)
Model 786
Aviation Snips (cuts right)
Model 788
Aviation Snips (cuts straight)
Model 787
Aviation Snips (cuts left)
GENERAL PURPOSE HAND TOOLS
7.10
Manual Knockout Kits
Hardened alloy steel drive screws equipped with H-D ball bearings provide ease of operation
and long life. Double end ratchet wrench included in Model R739BB provides speed and
convenience.
• H-D ball bearing drive screws.
• Sets include durable ABS storage case.
• 3 kits available, including deluxe ratchet drive.
• Precision-ground 3-point punch/die sets. Capacity to 2" in 10-gauge mild steel.
Catalog
No.
Model
No. Description Weight Std.
Pack
lb. kg
31787 R735BB 1/2"-1 1/4" Ball Bearing Kit w/Case 61/42.80 1
31792 R737BB 11/2"-2" Ball Bearing Kit w/Case 71/23.30 1
31797 R739BB 1/2"-2" Ball Bearing Kit w/Ratchet Wrench & Case 11 5.00 1
Hydraulic Knockout Kits
Combines ease of hydraulic operation and precision-ground knockouts to provide clean, quick
holes. Available with foot or hand pumps.
• Powerful 11-ton hydraulic ram.
• Pumps equipped with internal safety relief valve.
• Ram and pump equipped with quick disconnect couplers.
• Precision-ground 3-point punch/die sets. Capacity to 4" in 10 gauge mild or 16 gauge
stainless steel.
Catalog
No.
Model
No. Description Weight Std.
Pack
lb. kg
23477 HKO-186 1/2"-2" Hydraulic Kit w/Hand Pump (Includes 2 Draw Bolts,
Draw Bar, Spacers, 3' Hose) 313/414.30 1
24587 HKO-1810 1/2"-4" Hydraulic Kit w/Hand Pump 611/427.70 1
Knockout Kits
Accessories
Catalog
No.
Model
No. Description Weight Std.
Pack
lb. kg
31802 – 3/8" Ball Bearing Bolt 1 0.40 3
31807 – 3/4" Ball Bearing Bolt 13/40.70 2
31817 – 5/8" x 1" Ratchet Wrench 11/20.70 1
Accessories
Catalog
No.
Model
No. Description Weight Std.
Pack
lb. kg
17597 – 3/4" Draw Bolt (F/Hyd Sets 3/4"-4" P/D) 21/41.00 4
17602 – 3/8" Draw Bolt (F/Hyd Sets 1/2" P/D) 1/20.20 1
21847 – 3' Hyd Hose (Hand Pump) 3 1.40 1
21857 – 10' Hyd Hose (Foot Pump) 7 3.20 1
24537 8R111S Ram (Same Ram - All Sets) 61/42.80 1
24542 H-18 Hand Pump with Elbow 10 4.50 1
24582 – Spacer Group (Inc. Long, Med., Short Spacer) 11/40.50 1
7.11
GENERAL PURPOSE HAND TOOLS
No. KOPD-52
1/2"-2" Punch and Die Set with Case.
•Precision-ground 3-point punches.
•Tool steel tough dies.
•Sturdy case.
Catalog
No. Description
23487 No. KOPD-52 Set with 1/2", 3/4", 1", 11/4", 11/2", 2" Punches and Dies and Case
No. KOPD-254
•21/2"-4" Punch and Die Set with Case.
•Precision-ground 3-point punches.
•Tool steel tough dies.
•Sturdy case.
Catalog
No. Description
23492 No. KOPD-254 Set with 21/2", 3", 31/2", 4" Punches and Dies and Case
Bolt Cutters Bolt Cutters
•Hardened alloy steel jaws are designed and manufactured to assure the longest possible
blade life.
•One-step internal cam mechanism provides the quickest and simplest way to keep the
cutting blades precisely aligned.
•Handles and grips designed to allow greater mechanical advantage for crisp, controlled
cutting.
Catalog
No.
Model
No. Description
Capacity/Metals Weight
Soft (15RC)1Medium (31RC)2Hard (42RC)3
lb. kg
in. mm in. mm in mm
14213 S14 Center Cut 5/16 7.9 1⁄46.4 3⁄16 4.8 11/41.00
14218 S18 Center Cut 3/89.5 5⁄16 7.9 1⁄46.4 33/81.50
14223 S24 Center Cut 7/16 11.0 3⁄89.5 5⁄16 7.9 57/82.70
14228 S30 Center Cut 1/212.7 7⁄16 11.0 3⁄89.5 87/84.00
14233 S36 Center Cut 9/16 14.3 1⁄212.7 7⁄16 11.0 131/26.10
14238 S42 Center Cut 11/16 17.5 9⁄16 14.3 1⁄212.7 181/48.30
Knockout Sets
Replacement Heads
Catalog
No. Description Weight
lb. kg
18363 S14 Head Assembly 7/81.0
18368 S18 Head Assembly 11/41.5
18373 S24 Head Assembly 21/42.7
18378 S30 Head Assembly 87/84.0
18383 S36 Head Assembly 131/26.1
18388 S42 Head Assembly 181/48.3
1Soft steel and nonferrous metals, bolts, screws, rivets, wire. 2Iron and steel. 3Stainless steel, spring wire, heat-treated rod,
reinforcing rod.
GENERAL PURPOSE HAND TOOLS
7.12
No. 1380 Cable Cutter
• The Model 1380 Cable Cutter is designed to shear-cut insulated aluminum and copper
cable through 13/8" diameter and 750 MCM*. Drop-forged, heat-treated, alloy steel jaws
shear cable with minimum distortion of internal wires. Fitted with berglass-insulated
handles and rubber grips.
*Not intended for cutting steel or ACSR cable.
Catalog
No.
Model
No. Description Weight
lb. kg
83350 1380 Aluminum and Copper Cable through 13/8Diameter and 750 MCM 41/22.0
Cable Trimmers No. 87 ACSR Cable Trimmer
RIDGID No. 87 ACSR Cable Trimmer for fast, accurate cable splice preparation.
• Trims 85 sizes of ACSR cable from 8 AWG to 1,780,000 circular mils (C.M.).
• Bushings for 9 popular cable sizes from 1/0AWG through 1,780,000 C.M. available from
stock.
• The operation of the tool is similar to that of a conventional tubing cutter.
• The bushing holder, cutter and handy carrying case are sold as one unit.
• Case contains storage sockets for 11 bushings. Twelfth bushing is stored in holder.
Catalog
No.
Model
No. Description Weight
lb. kg
54135 87 ACSR Cable Trimmer, includes Bushing Holder, Cutter, and Carrying Case 91/24.30
54270 E-4695 Cutter Wheel 1 0.02
Cable Cutters
Catalog No. Bushing No. A.W.G. or C.M. No. of Strands
54440 E-5761 2/0 6/1
54445 E-5762 2/0 6/1
54450 E-5763 4/0 6/1
54465 E-5766 266,800 26/7
54480 E-5769 336,400 26/7
54500 E-5773 397,500 26/7
54520 E-5777 477,000 26/7
54540 E-5781 556,500 26/7
54575 E-5788 636,000 54/7 24/7
7.13
GENERAL PURPOSE HAND TOOLS
Shovels
Shovels
Shovel blades and shanks are one-piece, rust-proof 14-gauge steel, taper-formed and then heat treated. Round blades have a slip-resistant, turned step.
Burnished, lacquered ash handles are double-riveted to blade socket.
Catalog
No.
Model
No. Description Handle Length Blade Size Weight Replac. Handle (6 per pack)
Catalog No.
Replac. Handle (6 per pack)
Model No.
Std.
Pack
in. mm in. mm lb. kg
52300 170 Long Handle, Round Point 47 1,194 85/8x11
1/2219 x 292 34/51.70 34883 191 6
50482 170FG Fiberglass Round Point 48 1,200 85/8x11
1/2219 x 292 47/10 2.10 - -
52305 171 Long Handle, Square Point 47 1,194 93/4x 12 248 x 305 41/22.00 34883 191 6
50487 171FG Fiberglass Square Point 48 1,200 93/4x 12 248 x 305 5 2.30 - -
52310 172 D Handle, Round Point 27 686 85/8x11
1/2219 x 292 4 1.80 - - 6
52315 173 D Handle, Square Point 27 686 93/4x 12 248 x 305 41/22.00 - - 6
88680 176 D Handle, Steel Scoop 27 686 93/4x 16 248 x 406 51/22.50 - -
Model 172
Model 176
Models 170/No. 170FG
Models 171/No. 171FG Model 173
GENERAL PURPOSE HAND TOOLS
7.14
Catalog
No.
Model
No.
Screw
Diameter Use Drill Flute
Diameter
Length
Overall Weight Max.
Depth Std.
Pack
in. mm in. mm in. mm in. mm oz. g in. mm
35535 1 --1/83 0.139 3.5 25/16 59 1/214 1 25 6
35540 2 --
3/16 5 0.205 5.2 23/470 1 28 1 25 6
35545 3 --1/46 0.272 6.9 31/16 78 11/435 1 25 6
35550 4 --
5/16 8 0.338 8.6 35/16 84 13/450 1 25 6
35555 5 --
11/32 9 0.374 9.5 33/495 21/464 1 25 6
35560 6 --
7/16 11 0.471 12.0 41/8105 3 85 2 51 6
35565 7 --1/213 0.538 13.7 41/2114 4 113 2 51 6
35570 8 --5/816 0.665 16.9 43/4121 61/2184 3 76 6
Model 10 Screw Extractor Set
Model 10 set contains 20 precision tools – one each of Extractor Models 1 to 5 inclusive with
turnuts, drill Models 1 to 5 inclusive, and drill guides Models 921 to 1821 inclusive. Pre-formed
plastic box provides convenient storage.
Catalog
No.
Model
No. Description Capacity Weight Std.
Pack
in. mm lb. kg
35585 10 Screw Extractor Set 1/4-1/26-13 1
1/40.60 1
Screw Extractors
FIRST – Drill a small hole clear
through the broken end using a snug
fitting RIDGID Drill Guide for precision
centering.This centering hole is for
the larger drill to follow.
SECOND – Remove Drill Guide.Drill
out the small center hole to larger
diameter for receiving the “longrip"
Extractor.
THIRD – Drive the “longrip"Extractor
into the thin hollow shell and turn
it out.
Catalog
No. Description Weight Std.
Pack
oz. g
35575 Includes Nos. 3,4 and 5 8 227 1
35580 Inlcudes Nos. 1,2,3,4 and 5 8 227 1
Accessories
Catalog
No.
Model
No. Description Capacity Weight Std.
Pack
in. mm lb. kg
35695 10 Box Only 1/4-1/26-13 1
1/40.60 1
7.15
GENERAL PURPOSE HAND TOOLS
Model 25 Screw and Pipe Extractor Set
Model 25 set contains one each of screw extractors Models 1 to 8 inclusive (Models 1 to 5
Extractors with turnuts); Drill Models 1 to 8 inclusive, and one Model 36; and complete set of
drill guides and bushings. Maximum depth extractor range 1" to 3". Pipe extractors Models 80 to
85 also included. These precision tools are packed in a tted compartment box.
Catalog
No.
Model
No. Description Capacity Weight
in. mm lb. kg
35590 25 Screw and Pipe Extractor Set 1/4-1 6-25 9
1/44.20
Replacement Drill Guides
Catalog
No.
Model
No.
Diameter O.D. Overall Length Use Drill Weight Std.
Pack
in. mm in. mm in. mm oz. g
35765 921 9/32 7.1 13/16 30 1/831/471
35770 1021 5/16 7.9 13/16 30 1/831/214 1
35775 1121 11/32 8.7 13/16 30 1/831/214 1
35780 1221 3/89.5 13/16 30 1/831/214 1
35785 1321 13/32 10.0 13/16 30 3/16 31/214 1
35790 1421 7/16 11.1 13/16 30 3/16 33/421 1
35795 1521 15/32 11.9 13/16 30 3/16 33/421 1
35800 1621 1/212.7 13/16 30 3/16 31281
35805 1721 17/32 13.5 13/16 30 1/461281
35810 1821 9/16 14.3 13/16 30 1/461281
Twist Drills
Catalog
No.
Model
No.
Diameter Overall Length Weight Std.
Pack
in. mm in. mm lb. kg
35720 11/832
1/263 1/64 01
35725 23/16 53 73
1/32 01
35730 31/463
1/289 3/64 01
35735 45/16 8 4 102 5/64 01
35740 511/32 94
1/2114 3/32 01
35745 67/16 11 43/4121 5/32 01
35750 71/213 5 127 31/299 1
35755 85/816 51/2139 11/32 01
35760 36 1/46 6 152 3/32 01
Screw Extractors
Accessories
Catalog
No.
Model
No. Description Capacity Weight
in. mm lb. kg
35700 25 Box Only --1-
RIDGE TOOL COMPANY
8.1
BENDING & FORMING
Bending & Forming
• Wide selection for specic bending and forming needs.
• Quality you can trust.
______________________________________________________________________
Type No.
of Sizes
Capacity
Page
in. mm
Lever Benders
300 Series Plumbing 85⁄8-3⁄410 - 18 8.2
400 Series Instrument 93⁄16 -1⁄26-12 8.2
Tri-Bender 11⁄4-3⁄8–8.3
600 Series Heavy-Duty 93⁄16 -1⁄26-12 8.3
Ratchet Benders 35⁄8-7⁄816 - 22 8.3
Spring-Type Benders 81⁄4-7⁄86-22 8.4
Conduit Benders
Heavy-Wall 31⁄2-1
1⁄412-32 8.4
Thin-Wall 51⁄2-61⁄212 - 165 8.4
Tube Expanders 15 3⁄8-1
3⁄4–8.5
Swaging Tools 51⁄4-5⁄86-16 8.5
Flaring Tools
Ratcheting 31⁄8-3⁄44-18 8.6
Manual 10 1⁄8-1⁄26-12 8.6
Heavy Duty 33⁄8-1 –8.7
Hammer-Type 83⁄8-2 9-50 8.7
Hydraulic Bender &
Accessories 23⁄8-3 –8.7- 8.8
BENDING & FORMING
8.2
300 Series Plumbing Benders
• Designed to bend K and L soft copper tubing to a maximum of 180°.
• Offset cushion grip handles and a 90° start angle, together with a specially engineered
plastic shoe, combine to ease bending effort.
Catalog
No.
Model
No. Description
Tube Size
Capacity
(actual
O.D.)
Bend
Radius Weight
in. in. lb. kg
36962 310/316M* Lever Bender 5/821/461/22.86
36972 312 Lever Bender 3/427/873.13
*This product is dual-purpose, being both inch and metric.
Metric
Catalog
No.
Model
No. Description
Tube Size Capacity
(actual O.D.) Bend Radius Weight
mm mm lb. kg
36942 310M Lever Bender 10 42 41.81
36947 312M Lever Bender 12 42 41.81
36952 314M Lever Bender 14 56 61/22.86
36957 315M Lever Bender 15 56 61/22.86
36962 310/316M* Lever Bender 16 56 61/22.86
36967 318M Lever Bender 18 72 73.13
*This product is dual-purpose, being both inch and metric.
400 Series Instrument Benders
• Designed for bending annealed copper, steel and stainless with a wall thickness less than
or equal to 0.06" (1.5 mm) to a maximum of 180°.
• Offset cushion grip handles for comfort when forming 180° bends. A 90° start angle and
unique oil-absorbing shoe minimize bending effort while forming accurate bends.
Imperial
Catalog
No.
Model
No. Description
Tube Size
Capacity
(actual O.D.)
Bend Radius Weight
in. in. lb. kg
36117 403 Lever Bender 3/16 5/811/20.86
36122 404 Lever Bender 1/45/811/20.86
36092 405/408M* Lever Bender 5/16 15/16 23/41.18
36097 406 Lever Bender 3/815/16 23/41.18
36132 408 Lever Bender 1/211/251/22.45
*This product is dual-purpose, being both inch and metric.
Metric
Catalog
No.
Model
No. Description
Tube Size Capacity
(actual O.D.) Bend Radius Weight
mm mm lb. kg
36112 406M Lever Bender 6161
1/20.68
36092 405/408M* Lever Bender 824 23/41.18
36102 410M Lever Bender 10 24 23/41.18
36127 412M Lever Bender 12 38 51/22.45
*This product is dual-purpose, being both inch and metric.
Lever Benders
8.3
BENDING & FORMING
Model 456 Tri-Bender
• Designed to easily bend three different sizes of soft copper tubing with the same tool.
Ideal for plumbing and HVAC applications.
• A 90° start angle minimizes effort required to form a bend. Handy reference marks
indicate the angle for quick bends through 90°.
Catalog No. Model No. Description Capacity Bend Radius Weight
in. in. lb. kg
44852 456 Tri-Bender 1/4,5/16,3/81.01,0.98,0.95 11/10 0.48
600 Series Heavy-Duty Instrument Benders
• The 'stainless steel' specialist!
• High quality bending performance on stainless steel, and other hard tubing such as steel
and titanium.
• Two stage design allows for in-place bending from 90° to 180° without ever crossing
handles. Lock/unlock with a half turn rotation of the bending handle.
• Extra long 16" (40 cm) handles increase leverage and roll dies in the bending form reduce
force needed.
• Vise clamp built into bending form for extra stability.
Imperial
Catalog
No.
Model
No. Description
Tube Size
Capacity
(actual O.D.)
Bend Radius Weight
in. in. lb. kg
38028 603 Heavy-Duty Instrument Bender 3/16 5/813/40.78
38033 604 Heavy-Duty Instrument Bender 1/45/813/40.76
38038 605/608M* Heavy-Duty Instrument Bender 5/16 15/16 41.84
38043 606 Heavy-Duty Instrument Bender 3/815/16 41.84
38048 608 Heavy-Duty Instrument Bender 1/211/262.76
**This product is dual-purpose, being both inch and metric.
Metric
Catalog
No.
Model
No. Description
Tube Size
Capacity
(actual O.D.)
Bend Radius Weight
mm mm lb. kg
38053 606M Heavy-Duty Instrument Bender 616
13/40.76
38038 605/608M* Heavy-Duty Instrument Bender 824 41.84
38058 610M Heavy-Duty Instrument Bender 10 24 41.84
38063 612M Heavy-Duty Instrument Bender 12 38 62.76
**This product is dual-purpose, being both inch and metric.
Lever Benders
Geared Ratchet Tube Benders
• High geared mechanical ratios, bend heavy-wall steel tube (up to 1/8" wall thickness),
stainless steel tube (up to 3/32" wall thickness) and hard copper water tube (types K and L).
• Benders produce uniform bends up to 180°, with no need to anneal tubing or use special
temper grade tubing.
• Reduce bending effort to a minimum.
Catalog
No.
Model
No.
Radius Bend at Center of Tube Tube O.D. Weight
in. mm in. mm lb. kg
35170 358 3 76 5/816 71/23.25
35175 368 33/495 3/419 131/26.25
35180 378 33/495 7/822 131/26.25
Ratchet Benders
BENDING & FORMING
8.4
Spring-Type Tube Benders
Spring-Type Tube Benders
• Fast, free-form bending of soft copper and aluminum tube.
Catalog
No.
Model
No. Description Length
Tube Size
Capacity
(actual
O.D.)
Weight
in. mm in. mm lb. kg
35245 D-1375 Pack of 6 Spring-Type Benders 10 250 1/463/80.2
35250 D-1376 Pack of 6 Spring-Type Benders 10 250 5/16 810.5
35255 D-1377 Pack of 6 Spring-Type Benders 10 250 3/8910.5
35260 D-1378 Pack of 6 Spring-Type Benders 12 300 7/16 11 15/80.8
35265 D-1379 Pack of 6 Spring-Type Benders 12 300 1/212 25/81.2
35270 D-1380 Pack of 6 Spring-Type Benders 12 300 5/816 31/41.5
35275 D-1381 Pack of 6 Spring-Type Benders 12 300 3/419 33/41.7
35280 D-1382 Pack of 6 Spring-Type Benders 12 300 7/822 41/81.9
Conduit Benders
Heavy-Wall Conduit Benders
• Designed for the larger sizes of heavy-wall conduit. This bender has hardened teeth for
slip-resistant grip.
• Extra-long supporting socket minimizes handle breakage.
• Notch in radius protects conduit threads.
Catalog No. Model No. Capacity Weight
in. mm lb. kg
35230 B-1709 1/212 25/81.20
35235 B-1711 1/2-3/412-19 2
3/41.30
35240 B-1712 1 - 11/425-32 73/43.50
Handles not included
Thin-Wall Conduit Benders
• Made of cast iron, these tools have exceptionally smooth side walls which grip conduit
snugly to minimize distortion.
• Bending grooves conform to Standard Code Radii. Marks indicate 30°,45°, 60° and 90°
bends.
Catalog
No.
Model
No. Description Weight
lb. kg
35215 B-1677 Bends 1/2” (12 mm) Thin-Wall Conduit to 4” (100 mm) Inside Radius 21/21.1
35220 B-1678 Bends 3/4” (19 mm) Thin-Wall and 1/2” (12 mm) Heavy-Wall Conduit to 5”
(127 mm) Inside Radius 41/22.0
35225 B-1679 Bends 1" (25 mm) Thin-Wall and 3/4" (19 mm) Heavy-Wall Conduit to 6
1/2" (165 mm) Inside Radius 81/23.9
Handles not included
Spring-Type Bender Sets
Catalog
No.
Model
No. Description Weight
lb. kg
35285 E-5732 Set of 6, ¼”-5/8”(6mm-16mm) 13/40.8
35290 E-5734 Set of 8, ¼”-7/8”(6mm-22mm) 31.4
8.5
BENDING & FORMING
Tube Expanders
Model S Tube Expander
• This single-stage expander is designed to expand tubing for fast, accurate joints in soft
copper, aluminum, and soft steel tube without using ttings. The mechanism is free-
oating and self-centering.
Catalog
No.
Model
No. Description
Tube Size
Capacity
(actual O.D.)
Nominal
Tube
Capacity
Weight
in. in. lb. kg
30032 7Kit with 1/2", 5/8", 7/8" Heads and Case - - 62.7
34152 8Kit with 3/8", 1/2", 3/4", 1" Heads and
Case --61/20.0
15071 SExpander Handle - - 11/20.7
10251 -Expander Head 3/81/41/20.3
10261 -Expander Head 1/23/81/20.3
10271 -Expander Head 5/81/21/20.3
10281 -Expander Head 3/45/81/20.3
10291 -Expander Head 7/83/41/20.3
10301 -Expander Head 1-1/20.3
10311 -Expander Head 11/811/20.3
10321 -Expander Head 11/4-1/20.3
51206 -Expander Head 13/8-1/20.3
10341 -Expander Head 11/2-1/20.3
10351 -Expander Head 15/811/21/20.3
10361 -Expander Head 13/4-1/20.3
58747 -Replacement Case - - 31.4
Note: Kit Head sizes are given by Tube O.D.
Swaging Tools
Swaging Tools
• RIDGID®Swaging Tools are quality-made and zinc-plated for accuracy and durability.
• Set of four tools is packaged in handy vinyl pouch.
• Designed for copper, aluminum or brass tubing.
Catalog
No.
Model
No. Description
Tube Size Capacity
(actual O.D.) Weight
in. mm oz. g
52420 570 Kit-4 Tools - - 16 454
52425 562 Swaging Tool 1/46257
52430 563 Swaging Tool 3/810 4 113
52435 564 Swaging Tool 1/212 5142
52440 565 Swaging Tool 5/816 8 227
BENDING & FORMING
8.6
Precision Ratcheting Flare Tools
• Flares steel, stainless steel, hard copper and brass tubing through a wall thickness of
0.035" (0.9 mm).
• Easy to use – Racheting handle reduces effort required especially in conned areas.
• Quick set-up – Improves productivity.
• Durable – Eccentrically mounting, hardened steel aring cone.
• Smooth Flares – Handle clutch releases when are is complete to iron and smooth are.
• Versatile – Produces 45 degree are in sizes from 1/8"- 3/4".
Model 445R
Catalog
No. Model No. Type Sizes (in.) Weight
lb. kg
42153 445R 45 degree SAE Flares 1/4,3/8,1/2,5/8,3/433/10 1.5
Model 458R Extended
Catalog
No. Model No. Type Sizes (in.) Weight
lb. kg
83037 458R 45 degree SAE Flares 1/8,3/16,1/4,5/16,3/8,1/2,5/8,3/439/10 1.77
456R, DESIGNED FOR 410A REFRIGERANT
Catalog
No. Model No. Type Sizes (in.) Weight
lb. kg
70677 456R 45 degree R410A Flares 1/4,5/16,3/8,1/2,5/8,3/431/21.6
345 Manual Flare Tools
• Model 345 is a precision designed tool for producing 45˚ ares in soft copper, brass,
aluminum and mild steel tubing.
• A hardened, smooth cone provides fast, 45˚ ares either single or double lap.
• A single clamp screw provides for easy clamping and removal of tubing.
Catalog
No. Model No. Description Sizes (in.) Weight
lb. kg
23332 345 45˚ SAE Flares 3/16,1/4,5/16,3/8,7/16,1/2,5/823/41.20
23337 345-DL 45˚ SAE-(double ares) Above w/adapters for double lap
ares; 3/16,1/4,5/16,3/8,7/16,1/2O.D. Tubing 31.30
24797 345/150 45˚ SAE-(double ares) No. 345 w/No. 150
Tubing Cutter and Case Kit 31/21.60
33927 345/150DL 45˚ SAE Flares No. 345/DL w/No. 150
Tubing Cutter and Case Kit 31/21.60
31597 -- 3/16” Double Lap Adapter - -
31602 - - 1/4" Double Lap Adapter - -
31607 -- 5/16" Double Lap Adapter - -
31612 - - 3/8" Double Lap Adapter - -
31617 -- 1/2" Double Lap Adapter - -
31502 - - Case Only - -
Flaring Tools
8.7
BENDING & FORMING
Heavy Duty Flare Tools
• Recommended for aluminum and soft copper. Also ares steel, stainless steel, hard
copper and brass
• This precision tool provides smooth, uniform ares with minimum effort.
• Hardened steel aring cone, eccentrically mounted in needle bearings, produces rolling
action for even metal ow, giving uniform are walls without galling.
• Special ironing features ensures a smooth are.
Catalog
No. Model No. Description Sizes Weight
in. lb. kg
41285 375 37 degree SAE Flares 1/2,5/8,3/4,7/8,1 63/43.1
41295 454-W 45 degree SAE- Nominal Water Tube 3/8,1/2,3/4,1 61/42.8
41300 455 45 degree SAE Flares 1/2,5/8,3/4,7/8,1 63/43.1
Hammer-Type Flaring Tools
• Made of high-grade, hardened steel, these tools have a long nose guide that centers tools
for smooth, 45˚ uniform ares.
Catalog
No. Model No. Water Tube Size Weight
in. mm lb. kg
41315 E-37 3/893/16 0.1
41320 E-45 1/212 1/40.1
41325 E-46 5/816 3/80.2
41330 E-47 3/419 1/20.2
41335 E-52 125 3/40.3
41340 E-61 11/431 1 0.5
41345 E-63 11/237 11/20.7
41350 E-64 2 50 21/21.0
Hydraulic Benders
Hydraulic Benders - Tip-Up Wing
• Manual hydraulic benders for precision cold bending of standard pipes up to 3". These versatile,
portable benders are ideal for on-site bending as well as machine construction, boiler making and
industrial applications in general.
• Durable piston seals prevent premature leaks and maximize uptime.
• Longer cylinder stroke per pump and optimized hand force minimizes operator fatigue.
• Single circuit hydraulic system with return spring for better control of the ram and precise bending.
• Supplied in a wooden case and delivered with a set of bending formers for standard gas pipe
applications and corner supports.
• Bending angle indicators reduce starts, stops and pipe removal to take measurements.
Manually Operated
Catalog
No.
Model
No. Description
Capacity
(O.D.) Weight
in. lb. kg
36518 HB382 Tip-Up Wing Benders (Manual) 3/8-2 1587/10 72.0
36523 HB383 Tip-Up Wing Benders (Manual) 3/8-3 344 156.0
Flaring Tools
BENDING & FORMING
8.8
Former for Standard Gas Pipe
Catalog
No. Description Sizes Radius to
Center of Tube Weight
in. mm lb. kg
37223 Former for Gas Pipe 3/845 14/50.8
37228 Former for Gas Pipe 1/250 22/51.1
37233 Former Gas Pipe 3/465 4 1.8
37238 Former for Gas Pipe 1 100 4 1.8
37243 Former for Gas Pipe 11/4130 43/52.1
37248 Former for Gas Pipe 11/2150 91/24.3
37253 Former for Gas Pipe 2 200 142/56.5
37258 Former for Gas Pipe 21/2320 381/217.5
37263 Former for Gas Pipe 3 380 591/227.2
Accessories
Catalog
No. Description Weight
lb. kg
37618 Straightener 21/51.0
37813 Turnable Tripod (for all models up to 3") 161/27.5
37828 Transport Wheel Kit (for models HB382) 44/52.2
Accessories for 3" Cap. Hydraulic Benders
Catalog
No. Description Weight
lb. kg
37278 Corner Supports HB383 22 10.0
38078 Bending Frame HB383 802/536.5
38568 Extension for 3" - -
Accessories for 2" Cap. Hydraulic Benders
Catalog
No. Description Weight
lb. kg
37273 Corner Supports HBO382 64/53.1
37293 Fixing Pin HB382 4/50.4
38083 Bending Frame HB382 283/513.0
Hydraulic Benders -
Formers and Accessories
9.1
TUBE REPAIR & JOINING
Tube Repair & Joining
• Wide selection from a single source.
• Unique durable designs.
______________________________________________________________________
Type No. of Models Page
Pressure Test Pump 1 9.2
Soldering Guns 3 9.3
Pipe Freezer 2 9.4
Pipe Thawer 2 9.5
TUBE REPAIR & JOINING
9.2
1450 Pressure Test Pump
The 1450 Pressure Test Pump tests hydraulically for leaks in installations which are
required to be leak proof and will test systems up to 725 PSI. Especially for use in heating,
compressed air, refrigeration systems, oil installations, sprinkler systems and other small
bore pipe installations. .
• Very low effort required to operate.
• Pressure maintained automatically – no valve to be closed manually.
• Filter on inlet and outlet for better reliability.
• Two-stage lever action for fast lling of system and pressurization.
• Volume /stroke: 38 cm3.
• Includes an aluminium and a carbon enhanced PTFE piston pump for longer life.
Specifications
• Capacity – Plastic container with capacity of 13.5 l (water, oil, ethylene glycol).
• Volume/Stroke – 38 cm3.
• Includes – Aluminium and carbon enhanced PTFE piston pump for longer life; 1450C is a
Model without gauge (1/4" BSPT connection).
Catalog
No.
Model
No. Description Weight
lb. kg
50557 1450 Pressure Test Pump 14 6.5
Pressure Test Pumps
9.3
TUBE REPAIR & JOINING
RT-100 Electric Soldering Gun
• Flameless soldering in a compact, inexpensive package.
• The RT-100 Mini Electric Soldering Gun uses electric resistance heating technology
to melt solder on copper joints up to 11/2. With no ame, there is no fear of igniting
wallboard, insulation, or studs and joists. Simply place the carbon tips on the tting
to begin heating the joint and it can be completed in less than 20 seconds. The heat
generated through the carbon tips will melt all types of soldering material - 50/50 and
95/5included - and reach temperatures up to 750°F. The RT-100 is provided in a compact
design that makes it ideal for reaching tight spots during repair and renovation projects
and is extremely portable. The tool is designed with the service plumber in mind.
• Designed for soft soldering (50/50,95/5Alloys) 1/4"-1
1/2" Copper Tube.
• Flameless soldering – easy-to-use.
• Specially designed for repair and renovation jobs.
• Six feet cable.
• Built-in-handle and cord grip.
• Approved by CSA to CSA and UL standards (115 V only).
Specifications
• Cable Length – Includes six feet of cable.
• Includes – Built-in handle and cord wrap.
• Approvals – Approved by CSA to CSA and UL standards (115V only).
Catalog
No.
Model
No. Description Weight
lb. kg
69762 RT-100 115V Mini-Pro Soldering Gun 21 9.5
RT-175 Electric Soldering Gun
• The safer, ameless alternative to torches.
• The RT-175 Electric Soldering Gun is a lightweight, rugged electric soldering gun that
sweats joints on copper tube up to 3 . The RT-175 will operate on a standard 115V, 15
AMP outlet. There is no open ame to worry about igniting wallboard, insulation, or studs
and joists in the walls. Simply place the carbon tips on the copper tting and remove
when the solder begins to ow.
• Soft solders 1/4" - 3" copper tube.
• Flameless soldering – easy-to-use.
• Twelve feet of cable.
• Fully contained in metal carrying case.
• Approved by CSA CSA and UL standards (115 V only).
Specifications
• Cable – Twelve feet of cable.
• Case – Fully contained in metal carrying case.
• Approvals – Approved by CSA to CSA and UL standards (115V only).
Catalog
No.
Model
No. Description Weight
lb. kg
17861 RT-175 230V Professional Solder Gun 33.0 15.0
62862 RT-175 115V Professional Solder Gun 33.0 15.0
Soldering Guns
Accessories
Catalog
No. Description Weight
lb. kg
39966 Carbon Tips 1/40.1
39976 Threaded Studs 1/40.1
84417 Holster 1 0.4
Accessories
Catalog
No. Description Weight
lb. kg
39966 Carbon Tips 0.2 0.1
39976 Threaded Studs 0.2 0.1
84417 Holster 1.0 0.4
TUBE REPAIR & JOINING
9.4
Model SF-2500 SuperFreeze
• The SuperFreeze Pipe Freezer is an easy-to-use pipe freezing unit that allows the
contractor to keep water systems operating while making repairs. The RIDGID Model
SF-2500 is a mini-refrigeration unit that circulates self-contained refrigerant to its
aluminum freeze heads. This forms an ice plug in as little as 6 minutes in 1/2" (12 mm)
copper tube and can be used with up to 21/2" (65 mm) tube or 2" (50 mm) steel pipe. Once
the pipe is plugged, repairs can be made while the ice plug is maintained by the unit. Now
includes a bottle of specially formulated freeze gel to speed freezing. Apply the gel to
freeze heads before placing on pipe.
Standard Equipment
• 65942 – Clamp Bar.
• 69707 – Velcro Straps (Set of 2).
• 69712 – SF-2500R 3/4" CTS Bushings (set of 2).
• 69717 – SF-2500R 2" CTS Bushings (set of 2).
• 70652 – SF-2500R 11/4" CTS Bushings (set of 2).
• 60776 – Spray Bottle.
Specifications
• Capacity – Copper Tube: 1/2-2
1/2" (12 - 65 mm). Steel Pipe: 1/2- 2" (12 - 50 mm).
• Compressor – Rotary, 230V, 50 Hz, 2.4A, 505W.
• Refrigerant – R-507.
• Weight – 55 lbs (25 kg).
• Hose Length – 2,6 m ( 5,2 m span).
• Dimensions – 227/8" (58 cm) x 11" (28 cm) x 141/2"(37cm)(LxWxH).
Catalog
No.
Model
No. Description Weight
lb. kg
68967 SF-2500 Pipe Freezing Kit - 115V: 1/2"-2" Steel Pipe, 1/2"-2 1/2" Copper Tube 55 24.8
68962 SF-2500 Pipe Freezing Kit - 230V Export: 1/2"-2" Steel Pipe, 1/2"-2 1/2" Copper Tube 55 24.8
Pipe Freezers
SF-2500 Accessories
Catalog No. Description
65942 Clamp Bar
68857 SF-2500R 1/2" End Adapters (set of 2)
68862 SF-2500R 3/4" End Adapters (set of 2)
69707 Velcro Straps (Set of 2)
69712 SF-2500R 3/4" CTS Bushings (set of 2)
69717 SF-2500R 2" CTS Bushings (set of 2)
70652 SF-2500R 11/4" CTS Bushings (set of 2)
74946 Cool Gel (1 bottle) 237 ml
SF-2000 Accessories
Catalog No. Description
65937 SF-2000R Velcro Straps (set of 2)
66462 SF-2000R 11/4" CTS Bushings (set of 2)
68842 SF-2000R 3/8" End Adapters (set of 2)
68847 SF-2000R 1/2" End Adapters (set of 2)
9.5
TUBE REPAIR & JOINING
Models KT-190 / KT-200 Pipe Thawers
For fast thawing of frozen metal pipes 1/2" through 11/2" (12-36mm). The KT-190 and KT-200
Pipe Thawing Units provide continuous heating to quickly thaw 1/2"to1
1/2" frozen metal
pipes. With these lightweight, versatile units, there is no need to dig or tear apart walls.
Simply attach the clamps to the metal pipe on each side of the frozen section and the pipe is
thawed within minutes.
• Continuous Operation: The KT-190 and KT-200 operate continuously without requiring any
“cool-down" periods. There is no tripping of the unit or need to turn the unit off during the
thawing process. Simply attach the cables to the pipe, turn the unit on and let it do its job
– continuously from start to nish.
• Lightweight: Weighing under 30 lbs., each unit can be easily transported to the most
difcult locations such as attics.
• Versatile: The KT-190 can be used on lengths of pipe between 15 and 75 feet. With 4
output levels, the KT-200 can be used on 4' to 150' lengths of pipe. The KT-200’s amp
meter allows the user to select the proper output level for maximum current draw and
minimum thawing time.
• Powerful: Both units operate on a standard 115V, 15 amp outlet. The KT-190 produces 300
amps and the KT-200 produces 250-400 amps of thawing power.
• All these features and more make the KT-190 and the KT-200 the professional’s choice.
Specifications
Model KT-190.
• Pipe Capacity – 1/2"-1-1/2" (12-36mm).
• Input Current – 15 Amps.
• Minimum Reach – 15' / (4.6m).
• Maximum Reach – 75' / (23m).
• Cable Length – 25' / (7.7m).
• Cable Size–2AWG.
• Output Amps – 300.
• Weight – 25 lbs. (11.4kg).
Model KT-200.
• Pipe Capacity – 1/2"-1-1/2" (12-36mm).
• Input Current – 15 Amps.
• Minimum Reach – 4' (1.2m).
• Maximum Reach – 150' (46m).
• Cable Length – 25' (7.7m).
• Cable Size – 1/0 AWG.
• Output Amps – 250-400.
• Weight – 29 lbs. (13.2kg).
Catalog
No.
Model
No. Description Weight
lb. kg
62747 KT-200 Pipe Thawer w/2-25' 1/0 Cables 55 2.0
62802 KT-190 Pipe Thawer w/2-25' #2 Cables 46 21.0
62662 -Cable w/Clamp 25' 13 6.0
62772 -Extension Cable 25' #1/0 AWG 11 5.0
62812 -Series Cable 3' #2 AWG 11/20.6
Pipe Thawers
RIDGE TOOL COMPANY
10.1
PRESSING
Press Tools
• Feature lock-on cycle completion to ensure the same reliable, watertight joint every time.
• Are highly engineered to deliver superior quality and durability – backed by the RIDGID®
Lifetime Warranty.
______________________________________________________________________
Type No. of
Models
Pipe
Capacity (in.) Page No.
RP 200-B Compact Inline Cordless 51/2-1
1/410.4
RP 210-B Compact Cordless 41/2-1
1/410.5
RP 340 Standard Cordless or
Corded
71/2-1
1/410.6
Compact Series Jaws
ProPress Jaws 41/2-1
1/410.7
PureFlow Jaws 73/8-1
1/210.7
ASTM F 1807 for PEX 41/2-1
1/410.8
Standard Series Jaws
ProPress Jaws 6 1/2-2 10.8
PureFlow Jaws 71/2-2 10.9
Press Rings
ProPress XL-C 421/2-4 10.9
ProPress 12 1/2-1
1/410.10
MegaPress Jaws & Press Rings 9 1/2-2 10.11
Manual Press Tools 6 1/2-1 10.12
PressSnap Soil Pipe Cutter 111/2-4 10.13
PRESSING
10.2
Selection Chart
Press Tools
Compact RP 200-B
page 10.4 Jaws Pressing Rings Power Copper/SS
Capacity
PEX
Capacity
Weight
(lb.)
Rotating
Barrel Characteristics
Compact Series Jaws:
• ProPress®(copper &
stainless)
• Pureow™(PEX)
• ASTM F 1807 (PEX)
Compact Series Press Rings
(see chart below)
18V
Li-Ion
battery
½-1
1⁄4"3⁄8" - 1½" 6.2 with
battery 270˚
The RP 200-B is the newest addition to the RIDGID®
press tool line and gives contractors
another option for a fast and reliable way to join
copper, stainless steel and PEX. The inline
form of the tool allows access to tighter spaces,
enabling press connections in difcult to
reach areas.
Compact RP 210-B
page 10.5
Compact Series Jaws:
• ProPress®(copper &
stainless)
• Pureow™(PEX)
• ASTM F 1807 (PEX)
Compact Series Press Rings
(see chart below)
18V
Li-Ion
battery
½-1
1⁄4"3⁄8" - 1½" 5.9 with
battery 270˚
The Model RP 210-B Compact Press Tool from
RIDGID is a fast and reliable way to join copper,
stainless steel, PEX, and Multilayer ttings. It is
2 inches (5 cm) shorter and 25% lighter than our
previous compact tool for more pressing with less
fatigue. Now you can do more, with less!
RP 340
page 10.6 Characteristics
Standard Series Jaws:
• ProPress (copper &
stainless)
• Pureow (PEX)
Standard Series Press Rings:
(see chart below)
18V
Li-Ion
battery
½-4" ½-2" 8.5 with
battery 270˚
30% smaller tool increases maneuverability, 17%
lighter tool reduces operator fatigue, 31% longer
service interval (up to 42,000 cycles) maximizes
uptime. More than 400 presses per charge (with
Advanced Lithium 4 Battery). Ultimate exibility with
the ability to switch between battery and AC power
on the same tool.
PEX Crimp Tools
page 10.12 Characteristics
• ASTM F 1807 (PEX) – – – 3⁄8" - 1" 2.7-3.4 –
Constructed of lightweight, durable polycarbonate
E3® handles, RIDGID PEX Crimp Tools are ideal for
making copper crimp ring and stainless steel clamp
connections in potable water and radiant heating
applications.
Standard Series Press Jaws for use with CT400, 320-E, RP 330-B, RP 330-C & RP 340
Standard Series Jaws 3⁄8"½"5⁄8" ¾" 1" 1¼" 1½" 2"
ProPress (copper & stainless) – 76652 – 76657 76662 76667 76672 76677
Pureow (PEX) – 22653 22658 22663 22668 22673 22678 35343
Large Diameter Press Rings for use with CT400, 320-E, RP 330-B, RP 330-C & RP 340
Pressing Rings
Standard
Series
Actuator
Jaw
2½"3"4"
2½"-4"
Ring Kit
with
Case
ProPress XL-C
(copper and
stainless steel ttings)
V2 Actuator
21878 20543 20548 20553 20483
Compact Series Press Jaws for use with 100B, RP 200-B or RP 210-B
Compact Series Jaws 3⁄8"1⁄2"5⁄8"3⁄4" 1" 1¼" 1½"
ProPress (copper & stainless) – 16958 – 16963 16978 31228 –
Pureow (PEX) 17003 17008 19813 17013 17018 22683 22688
ASTM F 1807 (PEX) – 22958 – 22968 22973 22978 –
Press Jaws & Rings
ProPress®is a registered trademark of Viega.
PureFlow™is a trademark of Viega.
Small Diameter Press Rings for use with CT400, 320-E, RP 330-B, RP 330-C & RP 340
Actuator Jaw ½"3⁄4"1"1¼" 1½" 2"For Use
With
V1 28033 27998 28003 28008 28013 – –
RP 340
RP 330-B
RP 330-C
320E
CT400
V2 21878 ––––28018 28023
RP 340
RP 330-B
RP 330-C
320E
CT400
C1 26163 27998 28003 28008 28013 – –
100B
RP 200-B
RP 210-B
10.3
PRESSING
The Fastest, Most Reliable Press Tools
Compact Standard
Features Benefits RIDGID RP 200-B RIDGID RP 210-B RIDGID RP 340
Weight (tool and
battery) Lightweight, providing maximum comfort. 6.2 lbs. 5.9 lbs. 8.5 lbs.
Battery For convenience and maximum portability. 18V Li-Ion 18V Li-Ion 18V Li-Ion
Rotating Barrel Tool barrel rotates, allowing access
into the tightest spaces. 270˚ 270˚ 180˚
Approximate
Cycle Time
Fastest cycle times, providing maximum
speed with every connection. 4-5 Seconds 4-5 Seconds 4-5 Seconds
Tool Approval Third party approval. N/A N/A UL / CSA
Lock-On Cycle
Completion
Cycle completes automatically once
pressing action begins, ensuring a
reliable connection every time.
Auto Ram Retraction
Ram returns to start position
automatically, providing maximum
speed with every connection.
Jaw Pin Closure Sensor Prevents cycle from starting if pin is not
fully engaged, preventing tool damage.
Automatic Maintenance
Reminder
Automatic calibration reminder to ensure
optimal performance.
Extreme Temperature
Sensor
RP 200-B operating temp = 15˚ to 122˚ F.
RP 210-B operating temp = 15˚ to 140˚ F.
RP 340 operating temp = 15˚ to 122˚ F.
Low Battery Sensor
Alerts user to insufcient battery power,
providing maximum reliability with every
connection.
Warranty RIDGID®Full Lifetime Warranty.
FULL LIFETIME
WARRANTY
Against Material Defects
& Workmanship
FULL LIFETIME
WARRANTY
Against Material Defects
& Workmanship
FULL LIFETIME
WARRANTY
Against Material Defects
& Workmanship
Ridge Tool is the world's Pressing Technology™ leader, making the high-performance
RIDGID tools that drive the speed and reliability of copper, stainless and PEX connections.
PRESSING
10.4
RP 200-B Press Tool
The RP 200-B is the newest addition to the RIDGID®press tool line and gives contractors
another option for a fast and reliable way to join copper, stainless steel and PEX. The inline
form of the tool allows access to tighter spaces, enabling press connections in difcult to
reach areas.
• The inline form of the tool allows access to tighter spaces, enabling press connections in
difcult to reach areas.
• The tool kit comes standard with two 18V Advanced Lithium 2 batteries that can produce
over 200 presses per charge for jobsite efciency.
• Large capacity 18V Advanced Lithium 4 batteries are also available and can achieve over
400 presses per change to maximize uptime.
Specifications
• Capactity – 1/2"–1
1/4" (Copper & Stainless Steel), 3/8"-1
1/2" (PEX).
• Head Rotation – 270° Barrel/Jaw Swivel.
• Battery – 18V Advanced Lithium 2.
• Battery Charger – 120V.
• Hydraulic Ram Output – 5,400 lbs. (24kN).
• Weight – 6.2 lbs/2.8 kg (w/Advanced Lithium 2 Battery).
• Operating Temperature Range – 15°F to 122°F.
• Approximate Cycle Time – 4-5 Seconds.
• Compatibility – compatible with all RIDGID®Compact Series Pressing Attachments
Catalog
No.
Model
No. Description Weight Std.
Pack
lb. kg
43428 RP 200-B RP 200 Battery Press Tool Kit w/ProPress Jaws (1/2"–1
1/4") 26 11.8 1
43433 RP 200-B RP 200 Battery Press Tool Kit w/ProPress Jaws (1/2" – 1") 24 10.9 1
43438 RP 200-B RP 200 Battery Press Tool Kit w/PureFlow PEX Jaws (1/2", 3/4", 1") 24 10.9 1
43443 RP 200-B RP 200 Battery Press Tool Kit (No Jaws) 16 7.3 1
43448 RP 200-B RP 200 Battery Press Tool Only 12 5.4 1
Accessories
Catalog
No. Description Weight Std.
Pack
lb. kg
43458 Advanced Lithium Battery Charger (N. America) 14/50.8 1
44693 18V Advanced Lithium 2.0Ah Battery 10.4 1
44698 18V Advanced Lithium 4.0Ah Battery 11/20.9 1
44798 Charger Replacement Cord (N. America) 3/10 0.1 1
43453 Carrying Case 10.4 1
44848 Set of (1) 2.0Ah Battery & (1) 120V Charger, North America 24/51.3 1
44853 Set of (2) 2.0Ah Batteries & (1) 120V Charger, North America 34/51.7 1
Press Tools
10.5
PRESSING
RP 210-B Press Tool
The Model RP 210-B Compact Press Tool from RIDGID®is a fast and reliable way to join
copper, stainless steel, PEX, and Multilayer ttings. It is 2 inches (5 cm) shorter and 25%
lighter than our previous compact tool for more pressing with less fatigue. Now you can do
more, with less!
• The longest service interval available for compact press tools (32,000 cycles).
• Powerful 18V Advanced Lithium 2 batteries that maximizes presses per charge for more
uptime.
• 270-degree swiveling barrel to access tight spaces.
Standard Equipment
• 16958 – 1/2" Jaw for ProPress .
• 16963 – 3/4" Jaw for ProPress .
• 16978 – 1" Jaw for ProPress .
• 31228 – 11/4" Jaw for ProPress .
• 44693 – 18V Advanced Lithium 2.0Ah Battery.
• 43458 – Advanced Lithium Battery Charger (N. America).
• 31023 – RP210 Carrying Case.
Specifications
• Capacity – 1/2"to1
1/4" (12 to 35 mm) for copper and stainless; 3/8"to1
1/2" (14 to 32 mm)
for PEX/Multilayer.
• Head Rotation – 270° Barrel/Jaw Swivel.
• Battery – 18V Advanced Lithium 2.
• Battery Charger – 115V/230V.
• Hydraulic Ram Output – 5,400 lbs. (24kN).
• Operating Temperature Range – 15° F - 140° F (-10° C - 60° C).
• Approximate Cycle Time – 5 seconds.
• Weight – 5.9 lbs/2.6 kg (w/Advanced Lithium 2 Battery).
• Compatible with all RIDGID®compact series pressing attachments.
Catalog
No.
Model
No. Description Weight Std.
Pack
lb. kg
31028 RP 210-B RP 210 Battery Press Tool Kit w/ProPress Jaws (1/2"–1
1/4") 26 11.7 1
31038 RP 210-B RP 210 Battery Press Tool Kit w/PureFlow PEX Jaws (1/2" – 1") 24 10.7 1
31048 RP 210-B RP 210 Battery Press Tool Kit (No Jaws) 16 7.3 1
31053 RP 210-B RP 210 Battery Press Tool Only 12 5.5 1
Press Tools
Accessories
Catalog
No.
Model
No. Description Weight Std.
Pack
lb. kg
31023 RP 210-B Carrying Case 10 4.5 1
43458 -Advanced Lithium Battery Charger (N. America) 2 0.8 1
44693 -18V Advanced Lithium 2.0Ah Battery 10.5 1
44698 -18V Advanced Lithium 4.0Ah Battery 2 0.9 1
44798 -Charger Replacement Cord (N. America) 0 0.1 1
44848 - Set of (1) 2.0Ah Battery & (1) 120V Charger, North America 31.3 1
44853 - Set of (2) 2.0Ah Batteries & (1) 120V Charger, North America 41.7 1
PRESSING
10.6
RP 340 Press Tool
• Introducing the next generation of Pressing Technology from RIDGID®.
• Built to impress.
• 30% smaller tool increases maneuverability*.
• 17% lighter tool reduces operator fatigue*.
• 31% longer service interval (up to 42,000 cycles) maximizes uptime*.
• More than 400 presses per charge (with Advanced Lithium 4 Battery).
• Ultimate exibility with the ability to switch between battery and AC power on the same tool.
*Versus RP 330-B.
Specifications
• Capacity – ½" – 4" (Copper and Stainless Steel), ½" – 2" (PEX).
• 270˚ Barrel/Jaw SwivelHydraulic Ram Output – 7,200 lbs. (32kN).
• Weight – 8.5 lbs/3.8 kg (w/Advanced Lithium 2 Battery), 9.5 lbs/4.3 kg (w/AC Power Adapter).
• Operating Temperature Range – 15˚F to 122˚F (-10˚C to 50˚C).
• Approximate Cycle Time – 4 seconds.
• LED-light for continued operations in no or low-light environments. Longest service interval in
the industry – 42,000 Cycles.
• Compatible with all standard series pressing jaws and attachments From RIDGID®. For use with
copper and stainless steel tubing, steel pipe, PEX and cutting soil pipe.
• Battery Tool Kit Includes: RP 340 Press Tool, (2) 18V Advanced Lithium 2 Batteries, 120V
Advanced Lithium Battery Charger, and Carrying Case.
• Corded Tool Kit Includes: RP 340 Press Tool, AC power adapter and carrying case
Catalog
No. Description Weight Std. Pack
lb. kg
43348 RP 340 Battery Press Tool Kit (No Jaws) 19.0 8.6 1
43353 RP 340 Battery Press Tool Kit w/ProPress Jaws (1/2"-1") 31.0 14.1 1
43358 RP 340 Battery Press Tool Kit w/ProPress Jaws (1/2"-2") 51.0 23.1 1
43363 RP 340 Corded Press Tool Kit (No Jaws) 16.0 7.2 1
43368 RP 340 Corded Press Tool Kit w/ProPress Jaws (1/2"-1") 28.0 12.7 1
43373 RP 340 Corded Press Tool Kit w/ProPress Jaws (1/2"-2") 48.0 21.8 1
44483 RP 340 Press Tool Only 6.0 2.7 1
Press Tools
Accessories
Catalog
No. Description Weight Std.
Pack
lb. kg
43378 RP 340 Press Tool Carrying Case 83.6 1
44693 18V Advanced Lithium 2.0Ah Battery 10.5 1
44698 18V Advanced Lithium 4.0Ah Battery 11/20.9 1
43458 Advanced Lithium Battery Charger (N. America) 14/50.8 1
44798 Charger Replacement Cord (N. America) 3/10 0.1 1
44468 120V AC Power Adapter 10.5 1
44848 Set of (1) 2.0Ah Battery & (1) 120V Charger, North America 24/51.3 1
44853 Set of (2) 2.0Ah Batteries & (1) 120V Charger, North America 34/51.7 1
10.7
PRESSING
Compact Series Press Jaws
Compact Series Jaws for ProPress®System
For use with RIDGID©Compact Press Tools (100-B, 200-B, 210-B)
• 40% lighter and 33% smaller than Standard Series Jaws enabling them to t into tight spaces.
• Designed in conjunction with the ProPress System ttings, ensuring total system compatibility.
• Compatible only with RIDGID Compact Series pressing tools (100-B, RP 200-B, RP 210-B).
• Backed by full RIDGID Lifetime Warranty.
Specifications
• Capacity – ProPress (copper) 1/2"- 11/4"
Catalog
No. Description Weight Std.
Pack
lb. kg
16958 1/2" Jaw for ProPress 21/21.2 1
16963 3/4" Jaw for ProPress 21/21.2 1
16978 1" Jaw for ProPress 21/21.2 1
31228 11/4" Jaw for ProPress 21/21.2 1
Compact Series Jaws For PureFlow™ System
For use with RIDGID Compact Press Tools (100-B, 200-B, 210-B)
• 40% lighter and 33% smaller than Standard Series Jaws enabling them to t into tight spaces.
• Designed in conjunction with the PureFlow System ttings, ensuring total system compatibility.
• Compatible only with RIDGID Compact Series Pressing Tool (100-B, RP 200-B, RP 210-B).
• Backed by full RIDGID Lifetime Warranty.
Specifications
• Capacity – PureFlow (PEX) 3/8"-11/2"
Catalog
No. Description Weight Std.
Pack
lb. kg
17003 3/8" Jaw for Pureow 21/21.2 1
17008 1/2” Jaw for Pureow 21/21.2 1
17013 ¾" Jaw for Pureow 21/21.2 1
17018 1" Jaw for Pureow 21/21.2 1
19813 5/8" Jaw for Pureow 21/21.2 1
22683 11/4" Jaw for Pureow 21/21.2 1
22688 11/2" Jaw for Pureow 21/21.2 1
PRESSING
10.8
Compact Series Press Jaws
Compact Series ASTM F 1807 Jaws (For PEX Tubing)
For use with RIDGID©Compact Press Tools (100-B, 200-B, 210-B)
• Increased speed and reliability with PEX tubing connections.
• Wide range of capacity available in (4) sizes: 1/2", 3/4", 1", and 11/4".
• Eliminates user fatigue. Perfect for larger sizes of PEX tubing where manual tools can require a
great deal of force.
• Increased versatility of RIDGID Compact 100-B, 200-B and 210-B Pressing Tools. Same 100-B,
200-B and 210-B tool used to join copper tubing (with different pressing jaws).
• Pressing jaws never require calibration unlike manual crimp tools.
• Compatible with all ASTM F 1807 black copper crimp ring PEX tubing systems.
Specifications
• For use with – ASTM F 1807 black copper crimp rings and insert ttings
Catalog
No. Description Weight Std.
Pack
lb. kg
22958 1/2” ASTM F 1807 Jaws 21/21.2 1
22968 3/4" ASTM F 1807 Jaws 21/21.2 1
22973 1" ASTM F 1807 Jaws 21/21.2 1
22978 11/4" ASTM F 1807 Jaws 21/21.2 1
Standard Series Press Jaws
Standard Series Jaws for ProPress®System
For use with Standard Series Press Tools (CT400, 320-E, RP 330-B, RP 330-C, RP 340).
• Designed in conjunction with the ProPress System ttings, ensuring total system
compatibility.
• Compatible only with RIDGID Standard Series pressing tools.
• Backed by full RIDGID Lifetime Warranty.
Specifications
• Capacity – ProPress (copper) 1/2"- 2"
Catalog
No. Description Weight Std.
Pack
lb. kg
76652 1/2" Jaw for ProPress 41.9 1
76657 3/4" Jaw for ProPress 41/41.9 1
76662 1" Jaw for ProPress 41/22.0 1
76667 11/4" Jaw for ProPress 43/42.2 1
76672 11/2" Jaw for ProPress 61/22.9 1
76677 2" Jaw for ProPress 10 4.6 1
10.9
PRESSING
Standard Series Press Jaws
Standard Series Jaws for PureFlow™ System
For use with Standard Series Press Tools (CT400, 320-E, RP 330-B, RP 330-C, RP 340).
• Designed in conjunction with the PureFlow System ttings, ensuring total system
compatibility.
• Compatible only with RIDGID®Standard Series pressing tools.
• Backed by full RIDGID Lifetime Warranty.
Specifications
• Capacity – PureFlow (PEX) 1/2"-2"
Catalog
No. Description Weight Std.
Pack
lb. kg
22653 1/2" Jaw for PureFlow 41.8 1
22658 5/8" Jaw for PureFlow 41/41.9 1
22663 3/4" Jaw for PureFlow 41/22.0 1
22668 1" Jaw for PureFlow 41/22.0 1
22673 11/4" Jaw for PureFlow 43/42.2 1
22678 11/2" Jaw for PureFlow 61/22.9 1
35343 2" Jaw for Pureow 10 4.5 1
Standard Series ProPress®XL-C™ Rings
For use with ProPress XL-C (copper ttings) and XL-S (stainless steel ttings)
• Patented ring design to make pressed connections for 21/2" - 4" copper or stainless steel
tube.
• XL-C Rings and V2 Actuator Jaw include patented swiveling feature that allows the tool
to connect to the ring at any angle relative to the tubing, allowing greater access in tight
spaces.
• Designed in conjunction with the ProPress XL-C ttings, ensuring total system
compatibility.
• Compatible only with RIDGID Standard Series pressing tools (CT-400, 320-E, RP 330-B, RP
330-C, or RP 340).
• Backed by full RIDGID Lifetime Warranty.
• V2 Actuator Jaw features new jaw identication clips, for fast, easy identication of the
appropriate pressing jaw.
Standard Equipment
• 20543 – 21/2" Press Ring
• 20548 – 3" Press Ring
• 20553 – 4" Press Ring
• 21103 – XL-C Carrying Case Only
• 21878 – V2 Press Ring Actuator for standard RIDGID Tools
Specifications
• Capacity – 2 1/2" - 4" copper or stainless steel tubing
Catalog
No. Model No. Description Weight Std.
Pack
lb. kg
20483 XL-C/S 21/2" to 4" Rings, Actuator and Case Complete 401/418.2 1
20543 XL-C/S 21/2" Press Ring 62.7 1
20548 XL-C/S 3" Press Ring 93/44.4 1
20553 XL-C/S 4" Press Ring 113/45.3 1
21878 V2 V2 Press Ring Actuator For Standard RIDGID Tools 63/43.0 1
21103 XL-C/S XL-C Carrying Case Only 73/43.5 1
Press Rings
PRESSING
10.10
Rings for ProPress®
Rings for ProPress®permit access in tighter spaces and serve as an excellent complement to
your RIDGID®jaw sets. The swivel actuator allows a press tool to be placed +/-90 degrees to
the tube being pressed!
• Designed in conjunction with the ProPress System Fittings, ensuring total system
compatibility.
• V1 and V2 Kits are designed for use with RIDGID Standard Press Tools (CT-400, 320-E, RP
330-B, RP 330-C, or RP 340).
• C1 Compact Kits are designed for RIDGID Compact Press Tools (100-B, RP 200-B, RP 210-B).
• Standard Kit includes: press rings, actuator and carrying case.
Standard Equipment
• 27998 – 1/2" Press Ring for ProPress.
• 28003 – 3/4" Press Ring for ProPress.
• 28008 – 1" Press Ring for ProPress.
• 28013 – 11/4" Press Ring for ProPress.
• 28028 – Carrying Case #1 for 1/2"–1
1/4".
• 28033 – V1 Actuator.
Specifications
• Capacity – 1/2" to 2" copper and stainless steel tubing
Kits
Catalog
No.
Model
No. Description Weight Std.
Pack
lb. kg
27423 V1 V1 Kit,1/2"–1
1/4" Ring 103/44.9 1
27428 V2 V2 Kit, 11/2" – 2" Ring 135/85.9 1
28043 C1 C1 Kit, 1/2"–11/4" Ring 81/83.8 1
28048 V1/C1 V1/C1 Combo Kit, 1/2"–1
1/4" Ring 127/85.5 1
Press Rings
Rings
Catalog
No. Model No. Description Weight Std. Pack
lb. kg
27998 V1/C1 1/2" Press Ring For ProPress 1/20.2 1
28003 V1/C1 3/4" Press Ring For ProPress 3/40.3 1
28008 V1/C1 1" Press Ring For ProPress 10.5 1
28013 V1/C1 11/4" Press Ring For ProPress 10.5 1
28018 V2 11/2" Press Ring For ProPress 11/20.7 1
28023 V2 2" Press Ring For ProPress 2 0.9 1
28033 V1 V1 Actuator 47/82.1 1
Actuators
Catalog
No.
Model
No. Description Weight Std.
Pack
lb. kg
21878 V2 V2 Press Ring Actuator For Standard RIDGID Tools 63/43.1 1
26163 C1 C1 Actuator 21/81.1 1
28033 V1 V1 Actuator 47/82.2 1
Accessories
Catalog
No.
Model
No. Description Weight Std.
Pack
lb. kg
28028 V1/C1 Carrying Case #1 for1/2"–1
1/4"31.4 1
28038 V2 Carrying Case #2 for 11/2"–2" 3 1.4 1
10.11
PRESSING
MegaPress®Jaws & Rings
MegaPress®Jaws And Rings
MegaPress Jaws & Rings join 1/2" to 2" commercially-available Schedule 5-40 Black Iron
Pipe when used with RIDGID®Standard Press Tools (CT-400, 320-E, RP 330-B, RP 330-C or RP
340) and Viega®MegaPress Fittings.
• Prep tools work with a standard drill and remove burrs and smooths OD of pipe for tting
installation.
• Press connections can be made on a “wet" system.
• Flameless system eliminates the need for hot work permits.
• Backed by the RIDGID Full Lifetime Warranty against material defects and workmanship.
Standard Equipment – Actuator, V2.
• 37958 – 1/2" MegaPress Jaw For Standard RIDGID Press Tools.
• 37963 – 3/4" MegaPress Jaw For Standard RIDGID Press Tools.
• 37968 – 1" MegaPress Jaw For Standard RIDGID Press Tools.
• 37973 – 11/4" MegaPress Ring For Standard RIDGID Press Tools.
• 37978 – 11/2" MegaPress Ring For Standard RIDGID Press Tools.
• 37983 – 2" MegaPress Ring For Standard RIDGID Press Tools.
• 37988 – 11/4" to 2" MegaPress End Prep Tool.
• 37993 – 1/2" to 1" MegaPress End Prep Tool.
• 37998 – Steel Carrying Case.
• 38008 Abrasive Strips (Box of 10) - 1/2"-3/4"
• 38003 Abrasive Strips (Box of 10) - 1" - 2"
Specifications
• Compatibility – For use with MegaPress and MegaPressG ttings from Viega.
• Capacity – 1/2" to 2" commercially-available Schedule 5-40 black iron pipe.
Catalog
No. Description Weight Std.
Pack
lb. kg
37953 1/2" to 2" MegaPress Kit For Standard RIDGID Press Tools 691/231.5 1
48083 1/2" to 1" MegaPress Kit For Standard RIDGID Press Tools 433/10 19.2 1
Jaws
Catalog
No. Description Weight Std.
Pack
lb. kg
37958 1/2" MegaPress Jaw For Standard RIDGID Press Tools 43/42.2 1
37968 1" MegaPress Jaw For Standard RIDGID Press Tools 63/43.1 1
37963 3/4" MegaPress Jaw For Standard RIDGID Press Tools 51/42.4 1
Rings & Actuator
Catalog
No. Description Weight Std.
Pack
lb. kg
21878 V2 Press Ring Actuator For Standard RIDGID Tools 63/43.0 1
37973 11/4" MegaPress Ring For Standard RIDGID Press Tools 6 2.7 1
37983 2" MegaPress Ring For Standard RIDGID Press Tools 6 2.7 1
37978 11/2" MegaPress Ring For Standard RIDGID Press Tools 61/22.9 1
Prep Tools
Catalog
No. Description Weight Std.
Pack
lb. kg
37993 1/2" to 1" MegaPress End Prep Tool 11/20.7 1
37988 11/4" to 2" MegaPress End Prep Tool 21/41.0 1
Accessories
Catalog
No. Description Weight Std.
Pack
lb. kg
37998 Steel Carrying Case 23 10.4 1
38008 Abrasive Strips (Box of 10) -1/2"-
3/4"1/40.01 1
38003 Abrasive Strips (Box of 10) - 1" - 2" 1/40.02 1
PRESSING
10.12
Available in both Traditional and Close Quarters, RIDGID®is your source for manual ASTM
F1807 PEX Crimp Tools.
Traditional ASTM F1807 PEX Crimp Tools
RIDGID®Traditional PEX Crimp Tools are available 3/8" – 1" and are ideal for making PEX
tubing connections in potable water and radiant heating applications. Over 20% lighter
than other traditional-style crimp tools, these tools feature E3 ergonomic handles and come
standard with a Go/No-Go Gauge.
• For use with ASTM F1807 black copper crimp rings and insert ttings for PEX tubing.
• Reduced weight- Over 20% Lighter than traditional PEX crimp tools.
• Up To 33% less force required to produce a crimp, compared to traditional PEX crimp
tools.
• Compact tool Length for access to tight spaces.
• Six tools available in (5) sizes: 3/8", 1/2", 5/8", 3/4", 1" and a Combo 1/2"&3/4" Tool.
• Easily adjustable lock screw for tool calibration.
• All tools come standard with a Go/No-Go gauge.
Close Quarters ASTM F1807 PEX Crimp Tools
Close Quarters Manual PEX Crimp Tools are the newest addition to the RIDGID®Crimp Tool
line. With handle openings up to 71% smaller than traditional PEX Crimp Tools, contractors
can now maneuver into tight spaces with ease. And, you’ll always be prepared with a built-
in Go/No-Go Gauge – a RIDGID exclusive.
• For use with ASTM F1807 copper crimp ring PEX tubing connections.
• Durable, glass-lled Polycarbonate E3™ Handles (Expert Engineered Ergonomics) provide
increased comfort.
• Available in ½” and ¾” sizes.
• Easily adjustable cam for tool calibration.
• Integrated Go/No-Go Gauge folds into handle for easy storage.
Specifications
• Application – ASTM F 1807 black copper crimp rings and insert ttings
Traditional Tools
Catalog
No. Description Length Weight Std.
Pack
in. mm lb. kg
23448 1/2" PEX Crimp Tool 141/4361.95 27/81.3 1
23458 3/4" PEX Crimp Tool 143/4374.65 27/81.3 1
23463 1" PEX Crimp Tool 151/4387.35 3 1.4 1
23468 1/2"&3/4" PEX Combo Tool 151/2393.70 31/21.6 1
Press Tools
Close Quarters Tools
Catalog
No. Description Weight Std.
Pack
lb. kg
43853 1/2" Close Quarters Manual PEX Crimp Tools 21/10 1.0 1
43858 3/4" Close Quarters Manual PEX Crimp Tools 23/10 1.1 1
Accessories
Catalog
No. Description Weight Std.
Pack
lb. kg
23473 3/8"-3/4" ASTM F 1807 Gauge 10.5 1
23478 1" ASTM F 1807 Gauge 10.5 1
29583 ASTM F 2098 Gauge 10.5 1
ASTM F 1807
Traditional PEX Crimp Tool
ASTM F 1807
Close Quarters PEX Crimp Tool
10.13
PRESSING
Press Snap™Soil Pipe Cutter
Press Snap™ Soil Pipe Cutter
The Press Snap™ Soil Pipe Cutter expands the capabilities of RIDGID®standard press tools
by providing a fast and easy way to cut cast iron soil pipe. Without lengthy lever arms used
by traditional soil pipe cutters, improved access is a snap. Simply connect the Press Snap
cutter to a RIDGID press tool, wrap the chain around the pipe, and press.
• The Press Snap was ranked as one of Supply House Times' Top Products of 2009!
• No lengthy lever arms.
• Eliminates the need to score the pipe.
• Completes the cut in seconds.
Specifications
• Compatibility – compatible with all RIDGID®Standard Press Tools (CT-400, 320-E, RP 330-
B, RP 330-C, or RP 340).
• Capacity – cuts 11/2" to 4" No Hub & Service Weight Soil Pipe.
• Standard Kit – Press Snap Cutter, case and operator’s manual.
Catalog
No. Description Weight Std.
Pack
lb. kg
34403 Press Snap Soil Pipe Cutter Kit 12 5.5 1
34678 Case,Press Snap Soil Pipe Cutter 3.4 1.6 1
RIDGE TOOL COMPANY
11.1
DIAGNOSTICS, INSPECTION & LOCATING
Diagnostics, Inspection & Locating
RIDGID®diagostics offer products that set the standard in ruggedness and durability with the
technology needed to finish a job. These products include:
• RIDGID SeeSnake®video inspection systems that are the standard for reliability
and maneuverability.
• The NaviTrack®II and the NaviTrack Scout®locators that are the easiest to learn and use.
Ideal for locating sondes.
• RIDGID hand-held inspection cameras that diagnose and solve problems in tight spaces.
• RIDGID hand-held diagnostic equipment that provides simple, quick and accurate readings.
______________________________________________________________________
Drain & Sewer
Video Inspection
Pipe
Diameter (in.)
Cable Length
(ft.) Page No.
SeeSnake Mini/ Self-Leveling Mini 11⁄2-6 200 11.6
SeeSnake Standard 2-12 325 11.7
SeeSnake Self-Leveling 2 - 12 325 11.8
SeeSnake Max rM200 11⁄2-6 205 11.9
SeeSnake Compact2 11⁄2-6 100 11.10
SeeSnake microDrain™ 14 - 3⁄430 11.11
SeeSnake microReel™ 11⁄2-4⁄5100 11.12
SeeSnake nanoReel™ 3⁄4-2 85 11.13
CrossChek™ 13⁄4-3 - 11.14
Monitors & Recorders - - 11.15-11.18
______________________________________________________________________
Digital Interfaces Page No.
Laptop Interface 11.19
______________________________________________________________________
Hand-Held
Video Inspection
Cable
Length
(ft.)
Camera
Diameter
(in.)
Page No.
micro CA-25 3 0.7 11.20
micro CA-100 3-30 0.7 11.21
micro CA-300 3-30 0.7 11.22
______________________________________________________________________
Hand-Held Diagnostics Page No.
micro IR-100 Non-Contact Infrared Thermometer 11.24
micro LM-100 Laser Distance Meter 11.25
micro LM-400 Advanced Laser Distance Meter 11.26
micro CD-100 Combustible Gas Detector 11.27
______________________________________________________________________
Locating
Index/Selection 11.28-11.29
______________________________________________________________________
Plumbing
Locating
No. of Frequencies Page No.
Passive Line Trace Sonde
SeekTech®SR-20 5 4 7 11.30
SeekTech SR-60 5 8 7 11.31
Transmitters – – – 11.32-11.33
______________________________________________________________________
Plumbing
Locating
No. of Frequencies Page No.
Passive Line Trace Sonde
NaviTrack®II 1 67 11.34
NaviTrack Scout®1 3 4 11.35
Transmitters – – – 11.36-11.37
DIAGNOSTICS, INSPECTION & LOCATING
11.2
RIDGID®tools are profit machines. Each one
gives you the easy-to-use features needed to
get the job done right and quickly to incease job
protability. You can depend on the high quality
they provide for long service life to optimize your
investment. You can also depend on RIDGID to
offer a wide selection of complementary choices
and options to help your business attract new
customers and keep old ones to grow your
business volume.
From our popular line of SeeSnake®video
inspection systems and digital visualization
tools, SeekTech®and NaviTrack®utility and
plumbing locators, and hand-held diagnostic
tools – we offer the tools to help you increase
revenues. See it for yourself.
Record &
Share It
Digital Recording,
Storing and Sharing
Recording and sharing inspection videos to
streamline record keeping, communication with
customers and collaboration has never been
easier. Now you can view, store and share
inspection videos on DVD, on a laptop, or on the
Internet. More ways that RIDGID helps increase
profitability, professionalism and efficiency.
See More Starting on Page 11.15
See It
Video Inspection
Equipment
No matter what you need to see into, around
or behind, there is a RIDGID inspection system
available. With a wide selection of cameras,
push cables, reels and monitors, there is a
system that meets your needs. Each one is easy
to use and durable – traits that you have come to
expect from RIDGID.
See More Starting on Page 11.6
11.3
DIAGNOSTICS, INSPECTION & LOCATING
Manage It
Hardware and
Software Digital Tools
A laptop interface for your SeeSnake
®
inspection
system, powerful and full-function inspection
software, and RIDGIDConnect
™
business
optimizing software, are all available to increase
productivity and profitability.
See More Starting on Page 11.19
Find It
Locating Equipment
A full line of RIDGID locators and transmitters
are available to meet your needs for fast and
accurate identification of buried electric, cable,
water, gas, oil, telecom, drain and sewer
utilities. Each one is easy to use, offers the
flexibility to meet various needs and is an
ideal complement to RIDGID video inspection
equipment.
See More Starting on Page 11.28
Diagnose It
Hand-Held
Measurement Tools
You can depend on RIDGID
®
diagnostic tools to
provide the features and ease-of-use you need to
speed a variety of measurement jobs. Each one
includes easy-to-read LCD backlit displays that are
designed to be easily seen indoors and outdoors.
See More Starting on Page 11.24
DIAGNOSTICS, INSPECTION & LOCATING
11.4
Selection Overview
SeeSnake®Reel and Camera Selection
For inspecting lines ¾" to 12" in diameter, there is no better choice than a SeeSnake cable reel and camera system. Each one offers ease-of-use,
application-matched features and unmatched durability and longevity.
SeeSnake Mini SeeSnake SeeSnake
Max rM200
SeeSnake
Compact2
SeeSnake
microDrain™
D30/D65S
SeeSnake
microReel™
L100/L100C
SeeSnake
nanoReel N85S
Mini Color Reel Self-Leveling Standard Self-Leveling
14063 48488 14053 13988 42348 48093 37468 35183 40008
Applications Industrial Industrial Industrial Industrial Industrial Main Drain Lines Toilets / Sinks /
Lines Lateral Drain Lines HVAC/Utilities
PAGE NUMBER 11.6 11.6 11.7 11.8 11.9 11.10 11.11 11.12 11.13
Line Capacity 11⁄2"to6"
3.8 to 15 cm
11⁄2"to6"
3.8 to 15 cm
2" – 12"
5–30cm
2"– 12"
5–30cm
11⁄2"to6"
3.8 to 15 cm
11⁄2"– 6"
3.8 to 15.2 cm
1"– 3"
3.2 – 7.6 cm
11⁄2"– 4"
3.8 – 10.2 cm
3⁄4"– 2"
1.90 – 5.08 cm
Maximum Run 200' / 61 m 200' / 61 m 325' / 99 m 325' / 99 m 200' / 61 m 100' / 30.48 m 30'/9.14mor65'
/20m 100' / 30.48 m 85' / 25.9 m
Sonde Transmitter 512 Hz 512 Hz 512 Hz 512 Hz 512 Hz 512 Hz Optional 512 Hz 512 Hz 512 Hz
Distance Measurement Built-In Counter Built-In Counter Built-In Counter Built-In Counter Built-In Counter – – Optional –
MECHANICAL
Weight (Excl Monitor) 24.5 lbs / 11.1 kg
(reel)
24.5 lbs / 11.1 kg
(reel) 53 lbs. / 19.5 kg 53 lbs. / 19.5 kg 34 lbs / 15.4 kg
(reel)
16.6 lbs / 7.5 kg
(reel)
8.6 lbs / 3.9 kg or
9.8 lbs. / 4.4 kg 10.3 lbs / 4.7 kg 9.5 lb / 4.1 kg
Reel Frame Diameter 20" / 51 cm 20" / 51 cm 32" / 81 cm 32" / 81 cm 20" / 51 cm 14" / 35.6 cm 12.75" / 32 cm 12.75" / 32 cm 12.75" / 32 cm
Camera Diameter 1.18" / 30 mm 1.18" / 30 mm 1.365" / 35 mm 1.365" / 35 mm 1" / 25 mm 1" / 2.5 cm .87" / 22 mm .98" / 25 mm .61" / 15.5 mm
Camera Length 1.68" / 42 mm 1.68" / 42 mm 1.68" / 42 mm 1.94" / 48 mm 1.25" / 32 mm 1.68" / 42 mm 0.87" / 22 mm 1.48 / 38 mm .88" / 22.5 mm
Push Cable Diameter .31"/8mm .31"/8mm .44" / 11 mm .44" / 11 mm .30" / 7.5 mm .26" / 6.6 mm .33" / 8.3 mm .26" / 6.6 mm .25" / 6.3 mm
ENVIRONMENTAL
Operating Temperature 32˚ to 104˚ F 32˚ to 104˚ F 32˚ to 104˚ F 32˚ to 104˚ F -40˚ to 130˚F 32˚ to 104˚ F 32˚ to 115˚ F 32˚ to 115˚ F 32˚ to 115˚ F
Waterproof Depth 330' / 100 m 330' / 100 m 330' / 100 m 330' / 100 m 225' / 69 m 225' / 69 m 266' / 81 m 266' / 81 m 225' / 69 m
Video Resolution 768(H) x 494(V) 768(H) x 494(V) 768(H) x 494(V) 768(H) x 494(V) 648(H) x 488(V) 768(H) x 494(V) 628(H) x 586(V) 628(H) x 586(V) 648(H) x 488(V)
Number of Pixels 410K 410K 410K 410K 410K 410K 410K 410K 250K
Lighting 6 LEDs 6 LEDs 6 LEDs 6 LEDs 6 LEDs 6 LEDs 6 LEDs 6 LEDs 3 High Flux LEDs
Monitoring and Recording Selection
Innovation describes the line of RIDGID®monitors and recorders. The DVDPak monitor, for example, features a sunlight readable display and DVD
recording in a very compact package. Or, there’s the micro CA-300 camera. It is a full-function monitor and recording tool for SeeSnake microDrain and
microReel reels, yet it can be used with a cable-mounted camera to inspect areas as small as ¾".
SeeSnake DVDPak2 CS6Pak CS10 CS6 micro CA-300
Camera
32673 45163 39338 45143 37888
PAGE NUMBER 11.15 11.17 11.16 11.18 11.22
Recording Capability Built In DVD Digital Video / Images Digital Video / Images Digital Video / Images Digital Video / Images
Screen Size 5.7" LCD 5.7" LCD 12.1" LCD 5.7" LCD 3.5" Color TFT
Screen Type LCD LCD LCD LCD TFT
Battery 18VLI 18VLI 1or218VLI 18VLI 3.7VLI
Battery Runtime 2.5 to 3 hrs 2.5 to 3 hrs 4.5 hrs (2 batteries) 2.5 to 3 hrs 4 hrs
Integrated Line Trace Yes Yes Yes Yes -
Sonde Control 512Hz Push Button Push Button Push Button Push Button Yes
Lighting Controls 10 Level Digital 10 Level Digital 10 Level Digital 10 Level Digital 4 Level Digital
Screen Operating Range 32° F to 104° F 32° F to 104° F 32˚F to 104˚F 32° F to 104° F 32*F to 113*F
Recorder Operating Range 5˚F to 95˚F 14° to 158° F 14˚F to 158˚F 14° to 158° F 32*F to 113*F
Resolution 320 x 240 720 x 480 640 x 480 720 x 480 320 x 240
* Recording accessory available. See page 11.13.
11.5
DIAGNOSTICS, INSPECTION & LOCATING
RIDGID®Drain Cleaning Equipment – No matter what you need in a drain cleaning machine, there is a RIDGID
product just right for you.From sink machines to drum, sectional, rodder and water jet machines, you can
depend on RIDGID to have the right tool and accessories to meet your exact needs.Visit www.RIDGID.com for
more information.
STEP 2: PICK YOUR MONITOR
SeeSnake DVDPak2
5.7" LCD. DVD w/Video
Out 18V Battery Power
CS10
12.1" LCD, Digital Video/Images
SeeSnake CS6Pak
5.7" LCD, Digital Video/Images
SeeSnake CS6
5.7" LCD w/Video Out
18V Battery Power
micro CA-300
Handheld Digital
Recording & Monitoring
(microDrain, microReel & nanoReel)
33198 DVDPak2 with
Battery & Charger 31338 CS10 with Battery & Charger 45158 CS6Pak with Battery & Charger 45138 CS6 with
Battery & Charger
37888 micro CA-300 with
Battery & Charger
SeeSnake®LT1000/
LT1000M Laptop
Interface
35983/36663
PAGE NUMBER 11.19
Recording Capability Digital/DVD
File Formats Multi-Format
Power Source 18V LI
Battery Runtime 5 hrs
Integrated
Line Trace Yes
Internet Accessibility
of Video and Photos No
Recording, Interfacing, Archiving
and Collaboration Selection
Would you like to connect your monitor to a micro CA-300
inspection camera to add complete digital capabilities?
Or, transfer recordings to a laptop to burn DVDs, email
images and video or store and share these files from one
online location 24/7? There’s a RIDGID®solution for each
of these and more.
STEP 1: PICK YOUR REEL
Standard SeeSnake
Lines 2"-12" / 325' Length
SeeSnake Max rM200
Lines 1.5"-6" / 200' Length
microReel
Lines 1.5"-4" / 100' Length
microDrain
Lines 1"-3" / 65' Length
nanoReel
Lines 3/4"-2" / 85' Length
14053 Color 200'
13988 Color Self-Leveling 200'
13998 Color Self-Leveling 325'
42348 Color 200'
35183 Sonde, Counter, SeeSnake Version
35188 Sonde, Counter, micro CA-300
Handheld Version
37468 Sonde, SeeSnake Monitor Version
37473 Sonde, micro CA-300
Handheld Version
40008 nanoReel
N85S
Common Video Inspection Configurations – As Easy As 1, 2, 3
LT1000 Laptop Interface
Use Your Laptop to Monitor,
Record & Report
35983 LT1000 or 36663 LT1000M with
Battery & Charger
STEP 3: PICK YOUR RECORDING ACCESSORY
DIAGNOSTICS, INSPECTION & LOCATING
11.6
SeeSnake®Mini Video Inspection System
RIDGID®SeeSnake video inspection systems offer unmatched reliability and performance in
a ruggedized package. Each system offers:
•100% hardened stainless steel camera head spring assembly for optimum durability.
• Rugged, high-intensity lights for exceptional viewing and long life.
• Flexible transmitters make locating easy and are compatible with RIDGID locators.
• Can be used with any SeeSnake monitor or recorder.
•11/2" to 6" (3.8 - 15 cm) Lines up to 200' (61 m).
• Ideal for where portability and maneuverability are crucial: multi-story buildings, rooftops,
conned areas, etc.
Specifications
• Line Capacity – 11/2" to 6" (3.8 to 15 cm).
• Maximum Run – 200' / 61m.
• Sonde – 512 Hz.
• Weight (Excl Monitor) – 24.5 lbs / 11.1 kg.
• Reel Frame Diameter – 20" / 51 cm.
• Camera Diameter – 1.18" / 30 mm.
• Camera Length – 1.68" / 42 mm.
• Push Cable Diameter – .31"/8mm.
• Operating Temperature – -4˚ to 104˚F / -20˚ to 40˚C.
• Waterproof Depth – 330' / 100 m.
• Video Resolution – 768(H) x 494(V).
• Number of Pixels – 410K.
• Lighting – 6 LEDs.
Catalog
No. Description Voltage Weight
V lb.
14063 200’ Mini Color Reel (NTSC) 115 24.5
48488 200' Mini Color Reel (Self-Leveling) 115 34.5
Accessories
Catalog
No. Description Weight
lb. kg
15828 SeeSnake Mini FleXmitter 1.0 0.0
17558 Color Spanner Wrench 0.2 0.1
31753 Count Plus Cable Counter - -
67307 SeeSnake Interconnect Cord 33/10' (10 m/3 m) 1.1 0.5
67312 SeeSnake 3" (75 mm) Centering Star Guides, Pkg of 20 0.7 0.3
93392 Mini Guide Hoop, Pkg of 4 0.2 0.1
97462 Color Mini Ball guides, Pkg of 6 0.4 0.2
Replacement Parts
Catalog
No. Description
12248 18" System Cable with Dubbing Block
14083 Color Camera Head - NTSC (115V)
67322 100’ (30 m) SeeSnake Mini Push Cable Assembly
67327 200' (61 m) SeeSnake Push Cable Assembly
48533 Color Camera Head - Self-Leveling NTSC (115V)
Reels & Cameras
11.7
DIAGNOSTICS, INSPECTION & LOCATING
SeeSnake®Standard Camera
RIDGID®SeeSnake video inspection systems offer unmatched reliability and performance in
a ruggedized package. Each system offers:
•100% hardened stainless steel camera head spring assembly for optimum durability.
• Rugged, high-intensity lights for exceptional viewing and long life.
• Flexible transmitters make locating easy and are compatible with RIDGID locators.
• Can be used with any SeeSnake monitor or recorder.
• 2" to 12" (5 - 30 cm) Lines up to 325' (99 m).
• Wide pipe diameter capacity range makes this system ideal for a wide range of inspection
needs.
Specifications
• Line Capacity – 2" - 12" (5-30cm).
• Maximum Run – 325' (99m).
• Sonde – 512 Hz.
• Weight – 53 lbs / 19.5 kg.
• Reel Frame Diameter – 32" / 81 cm.
• Camera Diameter – 1.365" / 35 mm.
• Camera Length – 1.68" / 42 mm.
• Push Cable Diameter – .44" / 11 mm.
• Operating Temperature – -4˚ to 104˚F / -20˚ to 40˚C.
• Waterproof Depth – 330' / 100 m.
• Video Resolution – 768(H) x 494(V).
Catalog
No. Description Voltage Weight
V lb. kg
14053 200' Color Reel (NTSC) 115 42.0 19.0
14058 325' Color Reel (NTSC) 115 53.0 24.0
Accessories
Catalog
No. Description Weight
lb. kg
14078 Color Camera Head – NTSC (115V) - -
15323 SeeSnake Flexible In-Line Transmitter 0.6 0.3
17563 Color Spanner Wrench - -
31753 Count Plus Cable Counter - -
64497 SeeSnake 3" (75 mm) Centering Star Guides, Pkg of 20 - -
64502 SeeSnake 6" (150 mm) Centering Star Guides, Pkg of 10 - -
64627 SeeSnake Interconnect Cord – 33/10' (10 m / 3m)" - -
93387 SeeSnake Guide Hoop, Pkg of 4 - -
97832 SeeSnake 3" (75 mm) Roller Dolly - -
97852 SS Ball Guides Pkg of 10 - -
Replacement Parts
Catalog
No. Description
12248 18" System Cable with Dubbing Block
14028 Color Self-Leveling Camera Head – NTSC (115V)
14033 Color Self-Leveling Camera Head – PAL (230V)
64607 200' (61 m) SeeSnake Push Cable Assembly
64612 325' (99 m) Standard SeeSnake Push Cable Assembly
Reels & Cameras
DIAGNOSTICS, INSPECTION & LOCATING
11.8
SeeSnake®Self-Leveling Camera
RIDGID®SeeSnake video inspection systems offer unmatched reliability and performance in
a ruggedized package. Each system offers:
•100% hardened stainless steel camera head spring assembly for optimum durability.
• Rugged, high-intensity lights for exceptional viewing and long life.
• Flexible transmitters make locating easy and are compatible with RIDGID locators.
• Same features and specications as the SeeSnake.
• Includes an always upright, self-leveling camera design.
• Also available in combination with a Mini-SeeSnake reel.
Specifications
• Line Capacity – 2" - 12" (5-30cm).
• Maximum Run – 325' (99m).
• Sonde – 512 Hz.
• Weight – 53 lbs / 19.5 kg.
• Reel Frame Diameter – 32" / 81 cm.
• Camera Diameter – 1.365" / 35 mm.
• Camera Length – 1.94" / 48 mm.
• Push Cable Diameter – .44" / 11 mm.
• Operating Temperature – -4˚ to 104˚F / -20˚ to 40˚C.
• Waterproof Depth – 330' / 100 m.
• Video Resolution – 768(H) x 494(V).
Catalog
No. Description Voltage Weight
V lb. kg
13988 200' Self-Leveling Color Reel (NTSC) 115 42 19.00
13998 325' Self-Leveling Color Reel (NTSC) 115 53 24.00
Accessories
Catalog
No. Description Weight
lb.. kg
15323 SeeSnake Flexible In-Line Transmitter 0.6 0.3
17563 Color Spanner Wrench - -
31753 Count Plus Cable Counter - -
64497 SeeSnake 3" (75 mm) Centering Star Guides, Pkg of 20 - -
64502 SeeSnake 6" (150 mm) Centering Star Guides, Pkg of 10 - -
64627 SeeSnake Interconnect Cord – 33/10' (10 m / 3m)" - -
93387 SeeSnake Guide Hoop, Pkg of 4 - -
97832 SeeSnake 3" (75 mm) Roller Dolly - -
97852 SS Ball Guides Pkg of 10 - -
Replacement Parts
Catalog
No. Description
12248 18" System Cable with Dubbing Block
14028 Color Self-Leveling Camera Head – NTSC (115V)
14033 Color Self-Leveling Camera Head – PAL (230V)
64607 200' (61 m) SeeSnake Push Cable Assembly
64612 325' (99 m) Standard SeeSnake Push Cable Assembly
Reels & Cameras
11.9
DIAGNOSTICS, INSPECTION & LOCATING
SeeSnake®MAX rM200 Camera System
The rM200 Camera System combines portability and versatility to make your drain
inspections easy and efcient. The rM200 features a newly designed push cable for greater
abrasion resistance and more efcient push-ability.
• Next Generation Push Cable and Improved Reel Mechanics make inspections easier than
ever allowing you to push further with less effort.
• Ultra Compact Camera Head allows easier passage through tight turns while still
illuminating pipes up to 8".
• Docking System allows you to attach monitors for easy transport and connected viewing.
Specifications
• Cable Length – 200' (60 m).
• Camera Diameter – 1" (25 mm).
• Camera Length – 1.25" (3.2 cm).
• Line Capacity – 1.5" - 6" (38 mm -150 mm).
• Length – 20.8" (53 cm).
• Width – 13.8" (35 cm).
• Height – 24" (61 cm).
• Weight – 34 lbs (15.4 kg).
• Resolution – NTSC: 648 x 488; PAL: 768 x 576.
Catalog
No. Description Weight
lb. kg
42348 MAX rM200 Camera w/Transport NTSC 34 15.40
Accessories
Catalog
No. Description
46708 rM200 Ball Guide 85mm
46713 rM200 Ball Guide 125mm
Replacement Parts
Catalog
No. Description
43138 RM200 Camera Head NTSC
Reels & Cameras
DIAGNOSTICS, INSPECTION & LOCATING
11.10
SeeSnake®Compact2 Camera Reel
Big performance in a compact, durable package. Designed to inspect lines from 1.5"
to 6" (3.8 cm to 15.2 cm), the Compact2 includes a 100' (30 m) push cable, 1" (2.5
cm) self-leveling camera head and sonde.
Snap the CS6Pak digital recording monitor into the Compact2’s docking system and
you’re ready for the ultra-fast set-up. Simply power the system on, tilt the monitor
to the desired viewing angle and you’re ready to capture high quality images and
video clips to a USB drive.
• Quick-release CCU docking system for fast, efcient job set-up
• Flexible push cable for pushing ease through multiple tight turns
• Self-leveling camera for a crisp, clear, in-pipe image that is always upright
• Built-in sonde to locate a point of interest during the pipe inspection
Specifications
Weight (without Batteries) – 16.6 lb (7.5 kg)
Length – 25" (63.5 cm)
Width –14" (35.6 cm)
Height – 17" (43.2 cm)
Camera Type – 1" (2.5 cm) Self-Leveling
Resolution – 648 x 488 (NTSC), 768 X 576 (PAL)
Light Source – 6 LEDs
Sonde – 512 Hz
Push Cable Length – 100' (30 m)
Push Cable Diameter –0.26" (0.6 cm)
Push Cable Core – 0.14" (0.3 cm) Fiberglass
Push Cable Bend Minimum Radius – 2.5" (6.3 cm)
Line Capacity – 1.5" to 6" (3.8 cm to 15.2 cm)
Operating Temperature – 32°F to 104°F (0°C to 40°C)
Storage Temperature – 14°F to 158°F (-10°C to 70°C)
Ingress Protection without Monitor – IPx5
Catalog
No. Description Weight
lb. kg
48093 SeeSnake Compact2 (Reel Only) 16.6 7.5
48113 SeeSnake Compact2 System w/1 Battery and 1 Charger 25.1 11.4
48103 SeeSnake Compact2 System 22.3 10.1
SeeSnake Compact Accessories
Catalog
No. Description Weight
lb. kg
45158 CS6Pak Digital Recording Monitor 5.7 2.6
45163 CS6Pak w/2 Batteries and 1 Charger 9.5 4.3
45363 AC Battery Adapter 1.0 0.5
44693 18V Advanced Lithium 2.0Ah Battery 1.0 0.5
44698 18V Advanced Lithium 4.0Ah Battery 1.5 0.9
43458 Advanced Lithium Battery Charger (N. America) 1.8 0.8
Reels & Cameras
Replacement Parts
Catalog
No. Description Weight
lb. kg
48143 Compact2/CS6Pak Monitor Handle 0.7 0.3
48148 Compact2 Monitor Side Plate Spare Kit 1.3 0.6
48153 SeeSnake Monitor Side Plate Upgrade Kit 1.3 0.6
11.11
DIAGNOSTICS, INSPECTION & LOCATING
SeeSnake®microDrain™ Video Inspection System
• 1¼"to3/4"(32-75/100mm)* lines up to 65' (20 m).
• Passes multiple 90° bends in most 1.5" (40 mm) drain lines.
• SeeSnake microDrain™ video inspection system provides small size and
maneuverability for small diameter and tight-turn radius inspections.
* 3" (75 mm) when used with a microEXPLORER or micro CA-300. 4" (100 mm)
when used with a SeeSnake monitor.
• Lightweight and compact design is one-half the size of popular inspection
systems, easily stowed in a truck and carried onto the jobsite.
• Multi-monitor compatibility with existing SeeSnake monitors, or the micro CA-
300 digital inspection camera.
•Durable and reliable construction with hardened stainless steel camera head
spring assembly for a long service life as well as long lasting high-intensity
lights for exceptional viewing.
• Ideal for inspections with tight turns such as toilet traps and P-traps.
Specifications
• Camera Head – 0.86" (22 mm).
• Cable Length – 30' (10 m), 65' (20 m).
• Cable Diameter – 0.33" (8,3 mm).
• Line Capacity – 1¼" to3/4"(32-75/100mm).
• Weight – 8.6 lbs. (3,9 kg), 9.8 lbs. (4,4 kg).
• Length – 13.25" (33,7 cm).
• Width – 6.6" (16,8 cm).
• Height – 14.2" (36,1 cm).
• Resolution – 628 x 586 NTSC.
• Ball guide – 2 Included.
• Sonde – Standard with 20 m microDrain, 512 Hz.
• Counter – NA.
30' (10m) microDrain
Catalog
No. Description Weight
lb. kg
33103 microDrain D30 Reel (CA300) (NTSC) 7.30 3.31
40778 microDrain D30/micro CA-300 System (NTSC) 8.60 3.91
65' (20m) microDrain w/Sonde
Catalog
No. Description Weight
lb. kg
37468 microDrain D65S Reel (SeeSnake) (NTSC) 9.8 4.4
37473 microDrain D65S Reel (CA300) (NTSC) 9.8 4.4
40788 microDrain D65S/micro CA-300 System (NTSC) 11.1 5.0
Accessories
Catalog
No. Description Weight
lb. kg
33108 microReel Interconnect Cable for SeeSnake Monitor 0.6 0.3
33113 microReel Interconnect Cable for CA-300 Monitor 0.6 0.3
37483 microDrain D65S Drum Only NTSC 5.3 2.4
34318 microDrain Ball Guides (Standard Guide) 0.2 -
40593 microDrain Ball Guide Set (Standard + Pool) 0.2 -
(SeeSnake) = the reel containing the pushcable and camera head with a connection cable for a SeeSnake
monitor
(CA-300) = the reel containing the pushcable and camera head with a connection cable for a CA-300
monitor
Reels & Cameras
DIAGNOSTICS, INSPECTION & LOCATING
11.12
SeeSnake®microReel Video Inspection System
•11/2"to4/5"(40-100/125mm)* lines up to 100' (30 m).
•Passes 90° bends in most 50 mm lines.
• SeeSnake microReel video inspection system provides small size and maneuverability for
small diameter and tight-turn radius inspections.
* 4" (100 mm) when used with a microEXPLORER or micro CA-300. 5" (125 mm) when
used with a SeeSnake monitor.
• Lightweight and compact design is one-half the size of popular inspection systems, easily
stowed in a truck and carried onto the jobsite.
• Multi-monitor compatibility with existing SeeSnake monitors, or the micro CA-300 digital
inspection camera.
•Durable and reliable construction with hardened stainless steel camera head spring
assembly for a long service life as well as long-lasting high-intensity lights for exceptional
viewing.
• Stiffer push cable than microDrain to enable line inspections up to 100' (30m).
Specifications
• Camera Head – 0.98" (25 mm).
• Cable Length – 100' (30 m).
• Cable Diameter – 0.27" (6,7 mm).
• Line Capacity – 11/2" to4/5"(40-100/125mm).
• Weight – 10.3 lbs. (4,7 kg).
• Length – 13.25" (33,7 cm).
• Width – 6.6" (16,8 cm).
• Height – 14.2" (36,1 cm).
• Resolution – 510 x 496.
• Ball guide – 2 included.
• Sonde – 512 Hz.
• Counter – Optional (L100C).
100' (30m) microReel L100 w/Sonde
Catalog
No. Description Weight
lb. kg
35133 microReel L100 (SS CCU) NTSC 10.30 4.70
35143 microReel L100 (CA300) NTSC 10.30 4.70
40798 microReel L100/micro CA-300 System NTSC 11.60 5.30
100' (30 m) microReel L100C w/Sonde and Counter
Catalog
No. Description Weight
lb. kg
35183 microReel L100C (SS CCU) Counter NTSC 10 4.70
35188 microReel L100C (CA300) Counter NTSC 10 4.70
40808 microReel L100C/micro CA-300 System NTSC 12 5.30
Accessories
Catalog
No. Description Weight
lb. kg
33108 microReel Interconnect Cable for SeeSnake Monitor 0.65 0.31
33113 microReel Interconnect Cable for CA-300 Monitor 0.65 0.31
34623 microReel L100 Drum Only w/Sonde NTSC 5.50 2.50
35243 microReel L100C Drum Only NTSC 5.50 2.50
35338 microReel L100 Ball Guides (2 pack) - -
(SeeSnake) = the reel containing the pushcable and camera head with a connection cable for a SeeSnake monitor
(CA-300) = the reel containing the pushcable and camera head with a connection cable for a CA-300 monitor
Reels & Cameras
11.13
DIAGNOSTICS, INSPECTION & LOCATING
SeeSnake®nanoReel Industrial Video Inspection System
• ¾" to 2" (20 to 50 mm) Capacity up to 85' (25 m).
•Passes 90° bends in most 30 mm lines.
• The SeeSnake nanoReel opens up new possibilities in long run small diameter inspection
needs. Applications where only bore scopes could reach can now be inspected using
the nanoReel. Boiler tubes, supply lines, sprinkler systems, and a wide array of specialty
applications can all be inspected using the new nanoReel.
• Small diameter and tight turn radius camera allows lines up to 85' (25 m) to be inspected
with tight turns in 1" (25 mm) lines. Can pass 90° bends from 30 mm onwards in many
piping systems.
• Lightweight and compact unit allows for easy transport and efcient storage.
•Interchangeable drums let you change out the inner drum depending on the application.
• L100/L100C – 11/2" to 5" (40 - 125 mm) lines with a stiffer push cable allowing you to
inspect lines up to 100' (30 m).
• D30 and D65S – Small diameter with tight turns, 11/2" to 4" (40 - 100 mm) P-Traps, toilet
traps, pool lines up to 65' (20 m).
• N85S – Ultra small diameter lines 3/4" to 2" (20 - 50 mm) with tight turns for specialized
applications.
Specifications
• Camera Head – 0.62 (15,5 mm).
• Cable Length – 85' (25 m).
• Cable Diameter – 0.25 (6,3 mm).
• Line Capacity – ¾ to 2" (20 - 50 mm).
• Weight – 9.5 lbs. (4,1 kg).
• Length – 13.25" (33,7 cm).
• Width – 6.6" (16,8 cm).
• Height – 17.5" (44,5 cm).
• Resolution – 510 x 496.
• Ball Guide – 2 Included.
• Sonde – 512 Hz.
• Counter – NA.
Catalog
No. Description Weight
lb. kg
40818 nanoReel N85S / micro CA-300 System NTSC 10.8 4.7
39998 nanoReel N85S (CA-300) NTSC 9.5 4.1
40008 nanoReel N85S (SeeSnake) NTSC 9.5 4.1
(SeeSnake) = the reel containing the pushcable and camera head with a connection cable for a SeeSnake monitor
(CA-300) = the reel containing the pushcable and camera head with a connection cable for a CA-300 monitor
Reels & Cameras
DIAGNOSTICS, INSPECTION & LOCATING
11.14
RIDGID®CrossChek™ Inspection System
The RIDGID CrossChek allows you to visually inspect where you’ve bored before you
install the new utility, helping you reduce the likelihood of undetected cross bores.
•Designed for bore slots 1.75" to 3" wide.
•Easily integrated into your current boring process.
•Keep digital video documentation of each inspection.
• Works in most soil types, including wet clay and dry sand.
Catalog
No. Description Weight
lb. kg
42323 CrossChek Rig (nanoReel) 4.0 -
42328 CrossChek Rig (microDrain) 4.0 -
Reels & Cameras
11.15
DIAGNOSTICS, INSPECTION & LOCATING
SeeSnake®DVDPak2 Inspection Camera Monitor
The new SeeSnake®DVDPak2 Monitor lets you reliably monitor and record
inspections in the most extreme conditions.
• Lightweight and Small – design makes carrying your tools to the job site and
stowing your monitor easier than ever.
• Exceptional DVD Burning Reliability – takes the question out of what DVDs to use,
and how to finalize correctly.
•Fully Weatherized Design – gives you superior job site durability.
• Lithium-Ion Battery Power – allows you to record inspections regardless of the
availability of AC Power.
Specifications
• Display – 5.7" LCD.
• Resolution – 320 x 240.
• Power Source – RIDGID 18V Advanced Lithium 2 Battery or AC Plug.
• Weight – 9.15 lbs. (4.2 kg).
• Length – 13.8" (35.1 cm).
• Width – 9.1" (23.11 cm).
• Height – 5.3" (13.5 cm).
• Input – Composite Video In, Built-In Microphone.
• Media Compatibility – DVD-R, DVD+R, DVD-RW, DVD+RW, DVD+R DL.
Catalog
No. Description Weight
lb. kg
32673 DVDPak2 Monitor Only – 5.7" LCD (115V) 8.0 3.6
33198 DVDPak2 Monitor w/Battery and Charger – 5.7" LCD (115V) 12.0 5.4
33118 DVDPak2 Monitor w/Battery and Charger – 5.7" LCD (115V) - -
Accessories
Catalog
No. Description Weight
lb. kg
44848 Set of (1) 2.0Ah Battery & (1) 120V Charger, NA 2 4/5 1.30
44853 Set of (2) 2.0Ah Batteries & (1) 120V Charger, NA 3 4/5 1.70
Monitors & Recorders
DIAGNOSTICS, INSPECTION & LOCATING
11.16
SeeSnake®CS10 Digital Recording Monitor
The CS10 Monitor combines RIDGID®durability with the easiest to use digital
recording monitor in the industry. One touch recording allows you to record
snapshots and video directly to a USB stick then hand it directly to your customer.
• USB Stick – recording lets you record digitally into a format that your customer
can read on their computer.
•12.1" Daylight Readable Display – allows you to easily monitor and record
inspections in bright outdoor environments.
• Integrated Line Tracing – allows tracing the reel push cable with a RIDGID locator
(requires a RIDGID transmitter).
• Multi Mode Recording – lets you take snapshots, record full frame video, and
record in a lean video format called Auto-log (small les).
• Software Integrations – with SeeSnake HQ™ allow you to deliver your inspections
in a wide array of formats from online to DVD.
Specifications
• Weight – 13 lbs (5,9 kg).
• Length – 14.3" (36,3 cm).
• Width – 11.9" (30,2 cm).
• Height – 12.4" (31,5 cm).
• Display – 12.1" Daylight Readable LCD.
• Resolution – 640 x 480.
• Power Source – 1 or 2 RIDGID 18V Advanced Lithium Battery or AC Plug.
• Audio – Integrated Microphone and Speaker.
• Video – AVI 20FPS - 720 x 480.
• Image – JPG - 720 x 480.
• Transfer – USB stick.
• Software – Includes SeeSnake HQ Software.
Catalog
No. Description Weight
lb. kg
39338 CS10 Monitor w/2 Batteries and Charger (115V) 15.8 7.2
39328 CS10 Digital Recording Monitor (115V) 12.0 5.4
Batteries and Chargers
Catalog
No. Description Weight
lb. kg
44848 Set of (1) 2.0Ah Battery & (1) 120V Charger, NA 2.8 1.3
44853 Set of (2) 2.0Ah Batteries & (1) 120V Charger, NA 3.8 1.7
Monitors & Recorders
11.17
DIAGNOSTICS, INSPECTION & LOCATING
SeeSnake®CS6Pak Monitor
Capture still images and video clips directly to a USB thumbdrive and generate high
quality multi-media reports.
Both monitors have the same features and are compatible with all SeeSnake camera
reels. The CS6 mounts to the SeeSnake MAX rM200 docking handle for easy transport
and storage. The CS6Pak mounts to the Compact2 and can be quickly detached for
convenient placement and storage.
The CS6 and CS6Pak have the same great software and reporting capabilities in two
distinct form factors.
• One-touch recording - for fast, efcient documentation of inspection jobs
• Water-resistant keypad - for direct control of essential camera and monitor
functions
• Daylight viewable display - for a crisp, clear in-pipe image
• SeeSnake HQ Software - to edit, archive, and deliver reports via print, DVD, or
online
• On-screen keyboard - for adding custom job information and text notes.
Specifications
• Weight – 3.6 lb (1.6 kg).
• Length – 14" (35.6 cm)
• Width – 7.6" (19.3 cm)
• Height – 10" (25.4 cm)
• Display – 5.7" Daylight Readable LCD.
• Resolution – 640 x 480 (VGA).
• Power Source – RIDGID 18V Advanced Lithium Battery or 18 V AC Power Adapter.
• Audio – Integrated Microphone and Speakers.
• Video – 720 x 480 H.264 NTSC (720 x 576 H.264 PAL).
• Image – 720 x 480 JPG NTSC (720 x 576 JPG PAL).
• Transfer – USB Thumb Drive.
Catalog
No. Description Weight
lb. kg
45158 CS6Pak Digital Recording Monitor 3.9 1.8
45163 CS6Pak w/2 Batteries and 1 Charger 7.9 3.6
45363 AC Adapter 1.0 0.5
Monitors & Recorders
DIAGNOSTICS, INSPECTION & LOCATING
11.18
SeeSnake®CS6 Digital Recording Monitor
• Fast, Efcient Results.
• Capture still images and video clips directly to a USB thumb drive and
automatically generate high quality multi-media reports.
• Direct-to-USB recording – for fast, efcient documentation of inspection jobs.
• Water-resistant keypad – for direct control of essential camera and monitor
functions.
• Daylight viewable display – for a crisp, clear in-pipe image.
• SeeSnake HQ Software – to edit, archive, and deliver reports via print, DVD, or
online.
• On-screen keyboard – for basic titling and text entry.
Specifications
• Weight – 3.6 lb (1.6 kg).
• Length – 14.2" (36.5 cm).
• Width – 6.5" (16.5 cm).
• Height – 5.1" (13.0 cm).
• Display – 5.7" Daylight Readable LCD.
• Resolution – 640 x 480 (VGA).
• Power Source – RIDGID 18V Advanced Lithium Battery or 18 V AC Power Adapter.
• Audio – Integrated Microphone and Speakers.
• Video – 720 x 480 H.264 NTSC (720 x 576 H.264 PAL).
• Image – 720 x 480 JPG NTSC (720 x 576 JPG PAL).
• Transfer – USB Thumb Drive.
Catalog
No. Description Weight
lb. kg
45138 CS6 Digital Reporting Monitor 3.60 1.60
45143 CS6 w/2 Batteries and 1 Charger 7.40 3.40
Accessories
Catalog
No. Description Weight
lb. kg
44848 Set of (1) 2.0Ah Battery & (1) 120V Charger, NA 2 4/5 1.30
44853 Set of (2) 2.0Ah Batteries & (1) 120V Charger, NA 3 4/5 1.70
Monitors & Recorders
11.19
DIAGNOSTICS, INSPECTION & LOCATING
SeeSnake®Digital Laptop Interface
The SeeSnake LT1000 Laptop Interface allows you to leverage the power and
exibility of a laptop computer with your SeeSnake Mini or Standard drain inspection
cameras and reels. It lets you use a laptop computer as a camera control unit to add
powerful monitoring, recording, storage and communications capabilities.
• Ultimate Flexibility – in recording, monitoring, and reporting. Unlock the power of
your laptop to monitor, record, and communicate.
• Clean Keys Control Pad – allows you to keep gloved hands off the laptop keyboard
while controlling camera operation and recording during an inspection.
• Battery Powered Freedom – lets you perform inspections regardless of availability
of AC power.
• Laptop Stabilization System – allows you to secure and stabilize your laptop and
reel to protect it in the eld (full LT1000 only).
Specifications
• Power Source – RIDGID 18V Advanced Lithium Battery or AC Plug.
• Outputs – USB Video Stream, RCA Video and Audio.
• Controls – Sonde, Lights, Recording, Image Rotation, etc.
LT1000
The full LT1000 System mounts directly onto your SeeSnake Mini or Standard reel
giving you a stacked and stable platform with a single cord interface .
• Compatibility – All SeeSnake Mini and Standard Reels.
• Includes – SeeSnake HQ™ Monitoring/Recording Software, Reel Mounting Kit, 6'
(1.8 m) USB Cable, 4 Reel Outriggers (for stability), AC Power Cable.
LT1000M
The LT100M is a detached interface that allows you to interface with any SeeSnake
reel.
• Compatibility – All SeeSnake Reels.
• Includes – SeeSnake HQ Monitoring/Recording Software, 3' (90 cm) USB Cable,
Micro Frame, AC Power Cable.
Catalog
No. Description Weight
lb. kg
35973 LT1000 Laptop Interface System (115V) 6.0 2.7
35983 LT1000 w/Battery and Charger Kit (115V) 7.4 3.3
36653 LT1000M Laptop Interface System (115V) 4.7 2.1
36663 LT1000M w/Battery and Charger Kit (115V) 6.0 2.7
Batteries and Chargers
Catalog
No. Description Weight
lb. kg
43458 Advanced Lithium Battery Charger (N. America) 1 4/5 0.80
44693 18V Advanced Lithium 2.0Ah Battery 1 0.45
Monitors & Recorders
DIAGNOSTICS, INSPECTION & LOCATING
11.20
Hand-Held Video Inspection
micro CA-25 Digital Inspection Camera
The new RIDGID®micro CA-25 is a compact handheld inspection camera with a xed 17 mm
waterproof imager head for basic and short-range inspection jobs.
The micro CA-25 features a 17 mm aluminium imager head with 4 ultra-bright LED lights,
bringing superior image quality to its 2.4" Color LCD Screen. It also features Video Out for
transferring live images to external devices and 180° Digital Image Rotation for getting
upright images. Included with the micro CA-25 in a hard shell plastic case are a hook,
magnet, mirror and RCA cable.
Specifications
• Display – 2.4" Color LCD (480 x 234 Resolution).
• Camera Head – 17mm diameter, aluminum construction.
• Lighting – 4 LEDs with adjustable brightness.
• Cable Reach – 3' (90 cm), not extendable.
• Video Output – 3' (90 cm) RCA Cable (included).
•Image Rotation – 180°.
• Waterproof – Camera Head & Cable to 3' (90 cm).
• Power Source – 4 AA Batteries.
• Accessories – Mirror, Hook & Magnet.
Catalog
No. Description Weight
lb. kg
40043 micro CA-25 Inspection Camera 4.7 2.1
Replacement Parts
Catalog
No. Description Weight
lb. kg
37123 Mirror, Hook & Magnet for 17mm Camera Head 0.1 0.0
11.21
DIAGNOSTICS, INSPECTION & LOCATING
Hand-Held Video Inspection
micro CA-100 Inspection Camera
The new RIDGID®micro CA-100 Inspection Camera, the next evolution of the SeeSnake®
micro Inspection Camera, allows you to perform more detailed visual inspections in even
harder-to-reach areas. Its comfortable pistol-grip design, one-hand controls, and large screen
make it easy to see into the tightest spots. The micro CA-100 comes standard with a rugged
0.7" (17 mm) anodized aluminum camera head with four super bright LEDs to see into the
darkest areas. Easily rotate the active image counter-clockwise to see in any situation. With
an available 6 mm camera accessory, the micro CA-100 Inspection Camera allows you to
service and identify problems in more places. The RIDGID micro CA-100 Inspection Camera
provides solutions whenever and wherever you need them.
Specifications
• Display – 3.5" Color LCD (320 x 240 Resolution).
• Camera Head – 17 mm Diameter, Aluminum Construction.
• Lighting – 4 LEDs with Adjustable Brightness.
• Cable Reach – 3' (90 cm) expandable to 30' (9 m) w/optional extensions.
• Video Output – 3' (90 cm) RCA Cable (included).
•Image Rotation – Every 90°.
• Waterproof – Camera Head & Cable to 10' (3 m).
• Power Source – 4 AA Batteries.
• Attachments – Mirror, Hook & Magnet.
Catalog
No. Description Weight
lb. kg
36738 micro CA-100 Inspection Camera 5.5 2.5
Accessories
Catalog
No. Description Weight
lb. kg
37108 Cable Extension 3' (90 cm) 0.8 0.3
37113 Cable Extension 6' (180 cm) 1.5 0.7
37098 6 mm Imager with 1 m Cable* 0.2 0.1
37093 6 mm Imager with 4 m Cable* 0.9 0.4
31128 Universal 3' (90 cm) Cable Extension 0.8 0.3
*Not compatible with original micro inspection camera 25643 (rotary power switch design).
Replacement Parts
Catalog
No. Description Weight
lb. kg
37103 17 mm Replacement Imager 3' (90cm) 0.7 0.3
37123 Mirror, Hook & Magnet for 17mm Camera Head 0.1 0.0
DIAGNOSTICS, INSPECTION & LOCATING
11.22
Hand-Held Video Inspection
micro CA-300 Inspection Camera
Documentation made easy with the new RIDGID®micro CA-300 Inspection Camera, the
next evolution of the microEXPLORER®. Easily record still images and videos of problems
in hard-to-reach areas and save these on the internal memory (235 mb) or the included 4
GB SD-card. Comfortable pistol-grip design, large screen and rugged anodized aluminum
camera head with four bright LEDs make it easy to detect and diagnose the unreachable. Get
the perfect view with enhanced features like image rotation and digital zoom. Besides the
replaceable 3.7V Li-Ion battery, the micro CA-300 can also be powered with the included AC
Adapter which is ideal for time consuming (drain) inspection jobs or when you simply run out
of battery.
Specifications
• Display – 3.5" Color LCD (320 x 240 Resolution).
• Camera Head – 17 mm Diameter, Aluminum Construction.
• Lighting – 4 LEDs with Adjustable Brightness.
• Cable Reach – 3' (90 cm) expandable to 30' (9 m) w/optional extensions.
• Image/Video Format – Still Image - JPEG (640 x 480) / Video - AVI (320 x 240 resolution).
• Video Output – 3' (90 cm) RCA Cable (included).
• Waterproof – Camera & Cable to 10' (3 m) when properly assembled.
• Power Source – 3.7V Li-Ion Battery / 5V AC Adapter.
• Image Rotation – 4 x 90˚.
•Digital Zoom – Yes.
• Internal Memory – 235 MB.
• SD-card – Up to 32 GB (4 GB card included).
• Audio Recorder, Speaker, Headset – Yes, integrated.
• Included. – micro CA-300 with 17 mm imager, battery, charger, USB cable, hook, magnet
and mirror accessories, RCA cable, AC adapter, headset with microphone, 4Gb SD card.
Catalog
No. Description Weight
lb. kg
37888 micro CA-300 Inspection Camera 5.5 2.5
Accessories
Catalog
No. Description Weight
lb. kg
37098 6 mm Imager with 1 m Cable* 6/25 0.10
37093 6 mm Imager with 4 m Cable* 9/10 0.40
37108 Cable Extension 3' (90 cm) 3/40.30
37113 Cable Extension 6' (180 cm) 11/20.68
30208 Car Charger (DC) Adaptor 13/50 0.12
31128 Universal 3' (90 cm) Cable Extension 3/40.30
*Not compatible with original micro inspection camera 25643 (rotary power switch design).
Replacement Parts
Catalog
No. Description Weight
lb. kg
37103 17 mm Replacement Imager 3' (90cm) 0.7 0.3
37123 Mirror, Hook & Magnet for 17mm Camera Head 0.1 0.0
37083 micro CA-300 3.7 Li-Ion battery 0.2 0.1
37088 micro CA-300 3.7V Battery Charger 0.2 0.1
11.23
DIAGNOSTICS, INSPECTION & LOCATING
Hand-Held Video Inspection
6 mm Diameter Imager Head Accessory
• Nearly one-third the size of the standard camera head.
•Enables detailed inspections in very confined spaces.
• 4 LED lights provide clear images.
• Fully exible cables for easy navigation.
• Sleek aluminum construction withstands demanding applications.
• Compatible with: RIDGID®micro CA-100, micro CA-300, microEXPLORER and SeeSnake
micro *.
Specifications
• Camera Head – 6 mm Diameter, Aluminum Construction.
• Compatibility – RIDGID®micro CA-100, micro CA-300, microEXPLORER, and SeeSnake
micro *.
Catalog
No. Description Weight
lb. kg
37093 6 mm Imager with 4 m Cable* 0.9 0.4
37098 6 mm Imager with 1 m Cable* 0.2 0.1
Includes: Hook, Magnet and Mirror Accessory
*Not compatible with original micro inspection camera 25643 (rotary power switch design).
Replacement Parts
Catalog
No. Description
45358 Mirror, Hook & Magnet for 6mm Camera Head
6 mm imager with 1 m cable
6 mm imager with 4 m cable
Mirror, hook and magnet for 6 mm camera head
DIAGNOSTICS, INSPECTION & LOCATING
11.24
micro IR-100 Non-Contact Infrared Thermometer
The RIDGID®micro IR-100 Non-Contact Infrared Thermometer provides simple,
quick and accurate surface temperature readings at the push of a button. You
simply squeeze the trigger and point the ultra-sharp dual Class II lasers at the
surface being measured. The micro IR-100 provides an immediate temperature
measurement on a clear, easy-to-read backlit LCD display. In addition to numerous
other uses, this rugged and compact instrument enables professional tradesman
to diagnose heating and ventilation problems, perform preventative monitoring of
electrical motors and systems, troubleshoot steam traps and quickly check fuses or
circuit breakers for overheating – all without contact.
• Ultra Sharp Dual Class II Lasers illuminate the surface being measured.
• Ergonomic Pistol Style Grip with rugged over molding allows you to keep a solid
grip in the harshest of industrial environments.
• 20:1 Distance To Spot Ratio allows you to take more accurate measurements
from long distances.
• Visual and audible alarms quickly alert you to temperatures outside of the
ranges that you set.
• Bright Backlit Display which can be toggled on in poorly lit areas.
• Tripod Mount Capable for repeatable, precise temperature measurements.
Specifications
• Temperature Range – 59º to 1472ºF (-50º to 800ºC).
• Measurement Accuracy – 58°F ~68°F (-50°C ~20°C) ±4.5°F (2.5°C); 68°F
~1472°F (20°C ~800°C) ±1.0% or ±1.8°F (1.0°C).
• Response Time – Distance To Spot Ratio – 20:1.
• Temperature Display – Current temperature, max temperature.
• Measurement Units – Fahrenheit, Celsius.
• Power Source – Battery (1 x 9V).
Catalog
No.
Model
No. Description Weight
lb. kg
36153 micro IR-100 Non-Contact Infrared Thermometer 0.5 0.20
Test and Measurement
11.25
DIAGNOSTICS, INSPECTION & LOCATING
micro LM-100 Laser Distance Meter
The RIDGID®micro LM-100 Laser Distance Meter provides simple, quick and
accurate distance readings at the push of a button. Simply push the measurement
button to turn on the ultra-sharp Class II lasers, point the device at the spot to be
measured, and push the measurement button. The distance reading will appear on
the easy-to-read LCD display. This rugged, compact, portable instrument enables
professional tradesman to quickly determine run distances for bidding, distance of
piping run, measuring trouble spots down the line, and quickly determine spacing
for code compliance.
• Ultra Sharp Class II Lasers clearly highlight the point being measured.
• Exceptional distance range allows accurate measurements up to 164' (50 m).
• Adjustable units enable you to quickly read feet, inches or meters on the y.
• Bright backlit display for use in poorly lit areas.
• Quick and accurate calculations on the spot.
• Displays the last three measurements, stores the last 20 measurements.
• Rubberized over-molding allows you to keep a solid grip.
Specifications
• Measurement Accuracy – ±1/16", (1,5 mm).
• Range – 164 ft (50 m).
• Measurement Units – Inches, feet, meters.
• Measurement Calculations – Area, Volume, and Indirect measurement
calculations.
• Power Source – Batteries (2 x AAA).
•IP Rating – IP 54.
Catalog
No.
Model
No. Description Weight
lb. kg
36158 micro LM-100 Laser Distance Meter 0.5 0.2
Test and Measurement
DIAGNOSTICS, INSPECTION & LOCATING
11.26
micro LM-400 Advanced Laser Distance Meter
• View, Store, and Share.
• Quick distance readings and advanced calculations at your ngertips. Connect to
a smartphone or tablet to overlay measurements on a photo or sketch to share
with others.
• Clearly view measurements on the large, backlit, 4-line display.
•Inclination angle measurement allows indirect measurements for hard to reach
areas.
• Adjust units instantly to inches, feet, or meters.
• Bluetooth®connection to smartphones and tablets to view, store, and share data.
• Android®and iOS®Apps to overlay measurements onto a photo or sketch.
Specifications
• Measuring Accuracy – ± 1/16 inch (±1.5mm).
• Range – 229 feet (70 m).
• Measuring Units – inches, feet, meters.
• Angle Range – ± 65°.
• Angle Accuracy – ± 0.5.
• Bluetooth Range – 33 ft (10 m).
• Ruggedness – IP 54 Dust Proof, Splash Proof.
• Memory Storage – 20 Measurements.
• Batteries –2xAA(Included.
• Auto. Shut-Off – After 3 Minutes of Inactivity.
• Includes soft carrying case and two AA batteries.
Catalog No. Description Weight
lb. kg
36813 micro LM-400 Laser Distance Meter 0.44 0.22
Test and Measurement
RIDGIDSKETCH
RIDGIDsketch is a tool for mobile devices that allows you to calculate and
communicate measurements of your project. It can be used on its own or in
conjunction with a RIDGID LM-400 Laser Distance Meter. The app will connect to
your LM-400 via Bluetooth®and wirelessly receive the exact measurements from the
device. RIDGIDsketch works in both drawing mode and photo overlay mode allowing
you to develop precise room plans or annotate measurements within a photo.
RIDGID is the trademark of Emerson Electric Co. or its afliates and is registered
in the U.S. and elsewhere. All third-party trademarks are those of their respective
owners.
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Emerson Electric Co. is under license. Other
trademarks and trade names are those of their respective owners.
iOS is registered trademark of Apple Inc.
Android and the Android logo are trademarks of Google Inc.
11.27
DIAGNOSTICS, INSPECTION & LOCATING
micro CD-100 Combustible Gas Detector
The RIDGID®micro CD-100 Combustible Gas Detector provides simple and
quick readings to identify the presence of combustible gases. It is designed to
detect Methane, Propane, Butane, Ethanol, Ammonia, Hydrogen and many other
combustible gases. With adjustable sensitivity, even low-levels of gases can be
detected in seconds.
The RIDGID micro CD-100 Gas Detector ensures proper gas line installations,
checks for maintenance and repair needs, and quickly pinpoints combustible gas
leaks.
• Rugged ergonomic design makes it comfortable to use, yet tough.
• Tri-Mode Detection™ gives the operator the exibility to be alerted with a
visual, audible or vibration alert which can be adjusted for your environment.
• Adjustable sensitivity settings provide precise leak locating with the touch of a
button.
• 16" (40 cm) exible probe allows location and detection of leak in hard-to-reach
and confined spaces.
• Field replaceable sensor means more up-time and less time waiting for repairs.
Specifications
• Detection Range – 0 to 6400 ppm (Methane).
• Alarm Sensitivity – 40 ppm (Methane).
• Calibration – Automatic.
• Alarms – Visual, Audible, Vibration.
• Power Source – Batteries (4 x AA).
• Gases Detected* – Methane, Hydrogen, Propane, Ethylene, Ethane, Hexane,
Iso-Butane, Benzene, Iso-Butane, Ethanol, Acetaldehyde, Toluene, P-Xylene,
Methane, Ammonia, Hydrogen Sulde.
*Common mixtures that would include or emit more than one of these gases
include natural gas, paint thinners, industrial solvents, dry cleaning uids, and
gasoline.
Catalog
No.
Model
No. Description Weight
lb. kg
36163 micro CD-100 Combustible Gas Detector 1.0 0.45
31948 CD-100 RS Replacement Sensor - -
Test and Measurement
DIAGNOSTICS, INSPECTION & LOCATING
11.28
RIDGID®Receivers – RIDGID locating receivers feature an easy-to-use visual mapping display that allows you to locate utility lines and sondes/
beacons with condence. Use with a SeeSnake camera equipped with a sonde transmitter to locate the camera head during an inspection or use with a
line transmitter to find buried utilities. These locators can also find flushable float sondes and remote transmitters attached to a push rod or drain cable.
SeekTech SR-20 SeekTech®SR-60 NaviTrack®II NaviTrack Scout®
PAGE NUMBER 11.30 11.31 11.34 11.35
Omni-Directional
Mapping Display Yes Yes Yes Yes
User-Dened Frequencies Yes up to 35 kHz Yes - All Available No No
Number of Active Line Trace
Frequencies All up to 35 kHz All up to 490 kHz 73
Sonde Frequencies All up to 35 kHz All up to 490 kHz 74
Passive Search Omni-Seek (searches all passive
bands at once)
Omni-Seek (searches all passive
bands at once) 50/60 Hz 50/60 Hz
Depth Continuous Continuous Continuous Push Button
Weight w/batteries 3.5 lb. 5.1 lb. 5.1 lb. 3 lb.
* The ST-510 Transmitter can also be set to frequencies used by other manufacturers' equipment.
2216321893 19238
26168 21903 20168
Locating Equipment
Find sondes/beacons. Direct connect to utility lines. Find plastic pipe with integral line trace. Induce a signal to locate utilities.
RIDGID Transmitters – Accurately trace buried utilities by applying a signal with a RIDGID Line Transmitter. All transmitters have multiple frequency
options and are capable of applying a signal by direct connection and induction. Powerful 5W and 10W transmitters apply a strong signal making for
easier locates.
SeekTech ST-33QR SeekTech ST-510 SeekTech ST-305 NaviTrack Brick
PAGE NUMBER 11.32 11.33 11.33 11.36 11.36
Max Power Output 5W 10W 5W 10W 5W
Digital Display Yes Yes No No No
Line Trace Frequencies All up to 490 kHz 5* 4 64
Inductive Frequencies 25*3 64
Simultaneous Transmit
2 Line Frequencies No No Yes No Yes
Weight w/batteries 11.1 lb. 9 lb. 2.5 lb. 9 lb. 2.5 lb.
1481821898
96967
11.29
DIAGNOSTICS, INSPECTION & LOCATING
SeekTech®Utility Line Locators
Comparison of Features
SR-20 Locator SR-60 Locator Conventional
Omni-Directional Mapping Display Yes Yes No
User-Dened Frequencies
(Competitor Frequencies) Yesupto35K Yes – All Available Limited or No
Omni-Seek®
(Simultaneous Multiple Line Trace) Yes – All Passive Bands at Once Yes – All Passive Bands at Once No
Depth Continual Continual Push Button or Triangulation
Current Measurement Continual Continual Push Button & Average
Distortion Indication On One Screen Yes Yes No
Simultrace™
(Simultaneous Sonde & Line Trace) No Yes No
Stereo Guidance (Using Headphones) No Yes No
Target Line
Performance
The mapping display confirms a good locate signal and identifies distortion in congested areas using:
• Target-Line – Guides the operator down the line and shows changes in direction.
• Left-Right Guidance Arrows – Points the operator to the target utility.
• Proximity Signal and Signal Strength – Helps the operator center the locator closer to the target
for more confident locates.
Other Features
• Continual Depth – Increases productivity by showing depth changes in real-time.
• Omni-Seek®– Increases accuracy and efciency when searching in passive mode. Continuously searches passive power
and radio bands to locate and avoid unknown metallic lines.
• User-Dened Frequencies – RIDGID SeekTech receivers can be congured with up to 30 user-dened frequencies.
– SeekTech SR-60 locator can be set to any frequency between 10 Hz and 490,000 Hz making it a universal receiver.
– SeekTech SR-20 locator can be set to any frequency between 10 Hz and 35,000 Hz.
Current Strength/
Signal Angle
Signal Strength
Left/Right Guidance
Arrows
Depth/Distance
Proximity Signal
The large displays on SeekTech receivers give you the information you need when you need to locate
with speed, accuracy and condence.
DIAGNOSTICS, INSPECTION & LOCATING
11.30
SeekTech SR-20 Locator
A lightweight yet rugged receiver that provides all the information needed for faster, more
accurate locates.
• Target line and guidance arrows quickly identify distortion.
• Proximity signal and signal strength help work through difcult locates.
• Can trace any frequency from 10 Hz to 35,000 Hz.
Specifications
• Active Line Trace Frequencies * – 128 Hz, 1 kHz, 8 kHz and 33 kHz.
• Passive Power Trace – 50 Hz, 60 Hz, Passive Radio Trace – 4 kHz-15 kHz, 15 kHz-36 kHz.
• Sonde Frequencies * – 16 Hz, 512 Hz, 640 Hz, 850 Hz, 8 kHz, 16 kHz, 33 kHz.
• Power Source – 4 C-Cell Batteries.
• Battery Life – Approximately 16 Hours.
• Weight – 3.5 lbs. (1,6 kg).
* 30 user denable frequencies can be set from 10 Hz to 35,000 kHz.
Meets FCC Class A and EN 55022 Class A requirements.
Catalog
No. Description Weight
lb. kg
21893 SeekTech SR-20 Line Locator (Includes Case) 4.0 1.8
46918 KIT: SR-20 + ST305 + 4" CLAMP 8.5 3.8
Accessories
Catalog
No. Description Weight
lb. kg
20973 SeekTech 4" (100 mm) Inductive Signal Clamp 2.00 0.90
21898 SeekTech ST-305 Transmitter 2.50 1.90
Replacement Parts
Catalog
No. Description
22173 SR-20 Case
Utility Locating
11.31
DIAGNOSTICS, INSPECTION & LOCATING
SeekTech SR-60 Locator
For the fastest, easiest, most versatile receiver available.
Choose the SR-60 locator for fast condent locates even under tough locate conditions (poor
conductors, poor soil conditions, poor grounding, etc.).
Versatility
• Can trace any frequency from 10 Hz to 4900 kHz**.
• Can trace energized lines and sondes (beacons) simultaneously.
• Has all the ease of use and accuracy of the SR-20 but with ALL locatable frequencies.
Specifications
• Active Line Trace Frequencies * – 128 Hz, 1 kHz, 8 kHz, 33 kHz, 51 kHz, 93 kHz, 200 kHz,
262 kHz**.
• Passive Power Trace – 50 Hz, 60 Hz, Passive Radio Trace – 4 kHz-15 kHz, 15 kHz-36 kHz.
• Sonde Frequencies * – 16 Hz, 512 Hz, 640 Hz, 850 Hz, 8 kHZ, 16 kHZ, 33 kHZ.
• Power Source – 4 C-Cell Batteries.
• Battery Life – Approximately 16 Hours.
• Weight – 5.1 lbs. (2,3 kg).
• Meets FCC Class A and EN 55022 Class A requirements.
*30 user denable frequencies can be set from 10 Hz to 490 kHz.
** Up to 93 kHz for devices sold in Europe.
Catalog
No. Description Weight
lb. kg
22163 SeekTech SR-60 Line Locator (Includes Case) 5.1 2.3
Accessories
Catalog
No. Description Weight
lb. kg
20973 SeekTech 4" (100 mm) Inductive Signal Clamp 2.0 0.9
21898 SeekTech ST-305 Transmitter 2.5 1.9
Replacement Parts
Catalog
No. Description
29798 SR-60 Case
Utility Locating
DIAGNOSTICS, INSPECTION & LOCATING
11.32
SeekTech®Utility Transmitters
RIDGID®offers a range of transmitters for tracing underground metallic pipes and cables.
All RIDGID transmitters generate a signal onto the buried cable in one of three ways:
• Direct connection using connection cords.
• Induction with the optional inductive signal clamp.
• Induction from the transmitter.
ST-33QR ST-510 ST-305
Direct Connect Frequencies All 5** 4
Inductive Frequencies 2 4** 4
Competitors’ Frequencies User-Dened Frequencies Factory Set No
Simultaneous Transmit 2 Line Frequencies No No Yes
Automatic Impedance Matching Yes Yes Yes
Digital Output Level Display Yes Yes No
Max Power Output +5W* 10W 5W
Variable Power Setting Low, Medium, High Fully Adjustable Low, Medium, High
Power Source 6 D-Cell Batteries 8 D-Cell Batteries 6 C-Cell Batteries
Battery Check Continuous Continuous At Start-up
Weight (without batteries) 11.1 lb. / 5,0 kg 9 lb. / 4,1 kg 2.5 lb. / 1,9 kg
FCC & EN 55022 Requirement Class A Class B Class A
Comparison of Features
*When external power source is connected to the ST-33Q, or rechargeable batteries are used, up to 10 Watts nominal
output power can be generated in direct connect mode.
**Plus competitive frequencies.
SeekTech ST-33QR Line Transmitter
The SeekTech ST-33QR Line Transmitter is the ideal transmitter for inducing current onto a
target line.
• A powerful transmitter for inducing current onto a target line as well as direct connection.
• One of the most versatile transmitters available with any direct connect frequency
between 10 Hz and 490 kHz*.
• Power options include Lithium-Ion 18 V rechargeable battery, six D-cell batteries, or an
external 10-28 VDC power source.
Frequencies
• Direct Connect (factory default) – 128 Hz, 1 kHz, 8 kHz, 33 kHz, 93 kHz, 262 kHZ*.
• Direct Connect (user dened) – Any Frequency from 10 Hz – 490 kHz*.
• Induction – 8 kHz or 33 kHz.
Power
• Up to 10W when using 18V batteries or external power source, 5W when using D-cell
batteries.
* Up to 93 kHz for devices sold in Europe.
Catalog
No. Description Weight
lb. kg
26168 SeekTech ST-33QR Transmitter 11.1 5.0
Accessories
Catalog
No. Description Weight
lb. kg
20973 SeekTech 4" (100 mm) Inductive Signal Clamp 2 0.90
11.33
DIAGNOSTICS, INSPECTION & LOCATING
SeekTech ST-510 Line Transmitter
The SeekTech ST-510 Line Transmitter lets you energize metallic lines for tracing with a
locator.
•Ten Watts of fully variable power output.
• LCD display provides instant visual feedback on line resistance and current ow.
• Two 25' (7,62 m) lead wires with heavy duty clips.
• Audio feedback conrms a good circuit before beginning a trace.
Frequencies
• Direct Connect: – 128 Hz, 1 kHz, 8 kHz, 33 kHz and 262 kHz*.
• Induction: – 1 kHz, 8 kHz, 33 kHz, 262 kHz*.
• Competitor Frequencies: – available in both direct connect and induction.
• * Up to 93 kHz for devices sold in Europe.
Catalog No. Description Weight
lb. kg
21903 SeekTech ST-510 Transmitter (10 watts) 8 3.4
Utility Locating
SeekTech ST-305 Line Transmitter
The 5 watt SeekTech ST-305 Line Transmitter lets you energize metallic lines for tracing.
• Lightweight and compact transmitter that delivers up to 5 Watts of power.
• Can transmit two frequencies simultaneously.
• Audio feedback conrms a good circuit before beginning a trace.
Frequencies
• Direct Connect: – 1 kHz, 8 kHz, 33 kHz, 262 kHz*.
• Induction: – 1 kHz, 8 kHz, 33 kHz, 262 kHz*.
* Up to 93 kHz for devices sold in Europe.
Catalog No. Description Weight
lb. kg
21898 SeekTech ST-305 Transmitter 2.5 1.9
SeekTech Inductive Signal Clamp
• Allows users to apply a signal to a cable or pipe when direct connection is not possible.
• Compatible with all RIDGID®transmitters.
Catalog
No. Description Weight
lb. kg
20973 SeekTech 4" (100 mm) Inductive Signal Clamp 2 0.9
DIAGNOSTICS, INSPECTION & LOCATING
11.34
NaviTrack II Locator
NaviTrack II locators provide unprecendented ease-of-use for locating underground pipes.
NaviTrack II’s advanced technology greatly reduces training time. You can learn to locate
with NaviTrack II in minutes.
• Locates SeeSnake in-line transmitters, remote transmitters (sondes), and energized
metallic lines.
• Transmitters can be approached from any direction for faster, more accurate locates.
• Locate can be easily veried using the large mapping display.
• Continuous depth measurement.
Standard Equipment
• Navitrack Mark Chips, Pkg of 3.
• 22388 – NaviTrack II Carrying Case.
Specifications
•Weight–5lb.
• Power Source – 4 C-Cell batteries.
• Battery Life – Approximately 16 hours.
Standard Frequencies.
• Sonde – 16 Hz, 512 Hz, 640 Hz, 850 Hz, 8 kHz, 16 kHz, 33 kHz.
• Active Line Trace – 128 Hz, 1 kHZ, 8 kHz, 33 kHz, 262 kHz.
• Passive AC Line Trace – 60 Hz, 50 Hz.
Catalog
No. Description Weight
lb. kg
96967 NaviTrack II Locator 5.1 2.3
Accessories
Catalog
No. Description Weight
lb.. kg
14818 NaviTrack Line Transmitter 8 3.40
16728 Remote Transmitter, 512-AAA 0 0.18
19793 Float Sondes (2), Plus Extra Battery 0 0.18
20168 NaviTrack Brick Transmitter 2 0.90
Replacement Parts
Catalog
No. Description
12543 Marker Chips and Clip
22338 Navitrack 2 Case
NaviTrack®Locators
Kit shown without optional accessories
11.35
DIAGNOSTICS, INSPECTION & LOCATING
NaviTrack Scout®Locator
The NaviTrack Scout Locator is designed to solve the most demanding remote transmitter
(sonde) locates using multi-directional locating technology.
Easier Locates.
• The NaviTrack Scout multi-directional antenna technology sees the entire signal all of the
time. Simply maximize the signal strength and you have found the target. No nulls or false
peaks to complicate the locate.
Accuracy.
• This locator veries the locate position using a micro-mapping display to mark distinctive
poles in front of and behind the target, insuring an accurate locate.
• Automatic Depth.
•Depth is automatically calculated and displayed when over the target.
Standard Equipment
• Navitrack Mark Chips, Pkg. of 3.
• 20248 – Scout Carrying Case.
Specifications
• Weight – 3 lbs (1,4 kg).
• Power Source – 4 C-Cell batteries.
• Battery Life – Approximately 24 hours.
Standard Frequencies.
• Sonde – 16 Hz, 512 Hz, 640 Hz, 874kHz and 33 kHz.
• Line Trace – 128 Hz, 1 kHz, kHz and 33 kHz.
• Passive AC Line Trace – 60 Hz, 50 Hz.
• Meets FCC Class B and EN 55022 Class B requirements.
Catalog
No. Description Weight
lb. kg
19238 NaviTrack Scout Locator 3.00 1.4
Accessories
Catalog
No. Description Weight
lb. kg
14818 NaviTrack Line Transmitter 7.50 3.40
16728 Remote Transmitter, 512-AAA 0.40 0.18
19793 Float Sondes (2), Plus Extra Battery 0.40 0.18
20168 NaviTrack Brick Transmitter 2.00 0.90
Replacement Parts
Catalog
No. Description
12543 Marker Chips and Clip
20248 Scout Carrying Case
NaviTrack®Locators
DIAGNOSTICS, INSPECTION & LOCATING
11.36
NaviTrack Line Transmitter - 10 Watt
• For tracing buried cable, TV lines, phone lines and other metallic lines which
can carry an electromagnetic signal.
• Up to 10 watts of power output.
•Two 25' coiled connectors.
• Conductive ground rod.
• Inductive signal clamp (optional accessory).
Specifications
• Frequencies – 128 Hz, 1 kHz, 8 kHz, 33 kHz – 10 Watt.
• 200 kHz, 262 kHz–1Wattoutput power.
• Power Source – 8 D-Cell Batteries.
Catalog
No. Description Weight
lb. kg
14818 NaviTrack Line Transmitter 8 3.4
Accessories
Catalog
No. Description Weight
lb. kg
20973 SeekTech 4" (100 mm) Inductive Signal Clamp 2 0.90
NaviTrack®Transmitters
NaviTrack Brick - 5 Watt
• For tracing buried cable, TV lines, phone lines and other metallic lines which
can carry an electromagnetic signal.
•Fully variable 5 watts of power output.
• Lightweight, easy to carry.
• Conductive ground rod.
•Two 10' connectors.
Specifications
• Frequencies – 1 kHz, 8 kHz, 33 kHz, 262 kHz.
• Power Source – Six C-Cell Batteries.
Catalog
No. Description Weight
lb. kg
20168 NaviTrack Brick Transmitter 2 0.9
Accessories
Catalog
No. Description Weight
lb. kg
20973 SeekTech 4" (100 mm) Inductive Signal Clamp 2 0.90
11.37
DIAGNOSTICS, INSPECTION & LOCATING
Remote Transmitter (512 Hz Sonde)
• Can be attached to a drain cleaning cable or a water jet hose to locate the
Remote Transmitter in a line.
• Flashing LED indicates that sonde is transmitting.
• Meets FCC Class B and EN 55022 Class B requirements.
Catalog
No. Description Weight
lb. kg
16728 Remote Transmitter,512-AAA 0.4 0.18
Accessories
Catalog
No. Description
19258 Adapter for 1¼" (32 mm) Sectional Cable
19263 Adapter for 5/8" & ¾" (16 mm & 20 mm) Drum Machine Cables
19268 Adapter for 7/8" (22 mm) Sec. & 1/2" (12 mm) Drum Machine Cables
19273 Adapter for 5/8" (16 mm) Sec. & 3/8" (10 mm) Drum Machine Cables
NaviTrack®Transmitters
Floating Transmitter
Floating Transmitters are used for locating underground structures like septic
tanks.
• Ideal for locating septic tanks.
•512 Hz signal.
• Flashing LED indicates that sonde is transmitting.
•Flushable.
• Battery-powered.
• Meets FCC Class B and EN 55022 Class B requirements.
Catalog
No. Description Weight
lb. kg
19793 Float Sondes (2),Plus Extra Battery 0.4 0.18
RIDGE TOOL COMPANY
12.1
DRAIN CLEANING
Drain Cleaning
• Wide selection from a single source – “The Right Machine for Every Job”.
• A legacy of innovation and quality.
______________________________________________________________________
Type No. of
Models
Length (ft.)
Page
Hand Tools
Toilet/Urinal Augers 4 3-6 12.6
Grappler Hook 16 12.7
Flat Sewer Tape 10 25-100 12.7
Hand Spinners 425-35 12.8-12.9
Sink Machines
Auto-Clean™130 12.9
K-40/K-45 18 25-35 12.10-12.13
Drum Machines
Up to 4" Capacity 12 50-100 12.14-12.17
Up to 6" Capacity 3 50-200 12.18-12.19
Up to 8" Capacity 10 25-200 12.20-12.21
Up to 10" Capacity 925-250 12.22-12.23
Open Bale Drum Machines
Up to 6" Capacity 1 100 12.24-12.25
Sectional Machines
Up to 4" Capacity 16 Up to 175 12.26-12.29
Up to 8" Capacity 12 Up to 200 12.30-12.31
Up to 10" Capacity 11 Up to 300 12.32-12.35
Rodder Machines
Up to 24" Capacity 2Up to 500 12.36-12.37
Water Jetting Machines
Up to 4" Capacity 4 25-200 12.38-12.39
Up to 6" Capacity 2 50-200 12.40-12.41
Up to 10" Capacity 2 35-300 12.42-12.43
Pumps
Sump 9–
12.44-12.45
Sewage & Efuent 5–12.46-12.50
Battery-Powered Backup Systems 4–12.50-12.51
Utility 7 –12.51-12.54
AdvanTEXT™Alarm System 2– 12.54
Pump Accessories 4– 12-55-12.56
DRAIN CLEANING
12.2
Page
Augers
Grappler Hook
Flat Sewer Tape
Hand Spinners
12.6
12.7
12.7
12.8-12.9
Easily portable, compact and lightweight.
Application Model Page
Bathroom/lavatory/kitchen
sinks, tub/shower, urinal and
laundry tub drains
Auto-Clean/
K-40/K-45
12.9 - 12.13
Delivers high torque to clear obstructions
• Power and torque
• Cable-saving features
• Superior maneuverability
Application Model Page
Bathroom/lavatory/kitchen sinks, tub/shower,
urinal, laundry tub, roof vents and indoor
floor drains
K-400 12.14
Bathroom/lavatory/kitchen sinks, tub/shower,
urinal, laundry tub, roof vents and indoor
floor drains
K-3800 12.16
House laterals/main drains/floor drains K-6200 12.18
Laterals, main lines, commercial lines
K-750
K-7500
K-750R
12.20
12.24
12.22
Hand Tools
Sink Machines
Drum Machines
12.3
DRAIN CLEANING
High-speed cutting action to drill through obstructions.
• Power and speed with cable control.
• Lightweight and portable.
Line Size Application Model Page
3⁄4"to 4"Bathroom/lavatory/kitchen sinks, tub/shower, urinal,
laundry tub, roof vents and indoor oor drains K-50 12.26
11⁄4"to 4"Sink lines, roof vents and oor drains K-60SP 12.28
2"to 8"Floor/secondary lines, laterals and main lines K-1500 12.30
2"to 10"Laterals and main lines, commercial lines K-1500SP 12.32
2"to 10"Laterals and main lines, commercial lines –
gasoline engine powered for remote locations K-1500G 12.34
Sectional Machines
Rodder Machines
Water Jetters
Pumps
Designed specifically for larger diameter lines.
Line Size Application Model Page
8"to 24"Straight main work in municipalities, universities,
institutions and industry K-1000 12.36
Water jetting machines are ideal for clearing grease, sludge or soap-clogged lines.
Line Size Application Model Page
11⁄4"to 4"Sink lines/floor/secondary lines KJ-1350
KJ-1750 12.38
11⁄4"to 6"Sink lines/floor/secondary lines/laterals KJ-2200 12.40
2"to 10"Sink lines/floor/secondary lines/laterals/main lines KJ-3100 12.42
High quality, performance and dependability.
Type Features Page
Sump Compact and high performance 12.44
Sewage &
Efuent Available cellular monitoring 12.48
Backup
Systems Standard or advance notification 12.50
Utility Corrosion-resistant dewatering duty 12.51
Alarm System AdvanTEXT™ system for sewage & sump pumps 12.54
Accessories Water sensor and check valves 12.55
DRAIN CLEANING
12.4
For Drain Guns, Sink Drums, and Small Line Sectional Machines
For Sectional Machines
Model Length Typical Application Characteristics Machines
5⁄16"
(8mm)
Bulb Auger
C-1
C-21
25'
50'
Drain Lines 3⁄4"to1
1⁄2". Kitchen Sinks, Lavatory Sinks,
Bathtub Drains, Drinking Fountains and Urinals.
Hollow core cables that provide maximum flexibility for
severe bends and “P” Traps.
K-25/K-26
(25' only)
K-45
K-40
K-50*
Drop Head
C-2
C-22
25'
50'
Drain Lines 3⁄4"to1
1⁄2". Drop Head leads into down drain
pipes, especially good for back-to-back mounted fixtures
and severe bends.
Inner Core w/
Bulb Auger
C-1IC
C-13IC
25'
35'
Drain Lines 11⁄4" to 2". Kitchen Sinks, Lavatory Sinks, Slop
Sinks and Laundry Lines.
Inner core cables that provide good flexibility while resisting kinking.
K-25/K-26
(25' only)
K-45, K-40
K-3800,
K-50*
Inner Core w/ Drop
Head
C-2IC
C-23IC
25'
35'
Drop Head leads into down drain pipes, especially good
for back-to-back mounted fixtures and severe bends.
3⁄8"
(10mm)
Male Coupling
C-4
C-6
C-6IC
25'
35'
35'
Drain Lines 11⁄4"to2
1⁄2". Kitchen Sinks, Lavatory Sinks,
Slop Sinks, and Disposal Waste Lines.
Flexible, yet tough 3⁄8" cable most commonly used after traps have been
removed. C-6IC slightly stiffer than C-6.
K-45
K-40
K-50*
Bulb Auger
C-5 35' Drain Lines 11⁄4"to2
1⁄2". Kitchen Sinks, Lavatory Sinks,
Slop Sinks, and Disposal Waste Lines.
Model Length Typical Application Characteristics Machines
3⁄8"
(10mm)
w/Inner Core
C-31 ,C-31IW
C-32 ,C-32IW
C-33 ,C-33IW
50'
75'
100'
Drain Lines 11⁄2"to2
1⁄2". Kitchen Sinks ,Lavatory Sinks,
Slop Sinks and Laundry Stacks.
Good flexibility. As torque builds, outer spring tightens on wire core
causing cable to stiffen and transfer greater torque to cutter.
K-400
K-3800
1⁄2"
(12mm)
w/Inner Core
C-44, C-44IW
C-45, C-45IW
C-46
50'
75'
90'
Drain Lines 2" to 4". Laundry Stacks, Roof Vents and
Indoor Floor Drains.
Same characteristics as above. Exceptional
flexibility and toughness for a 1⁄2" inner core cable.
K-400
K-3800
5⁄8"
(16mm)
w/Inner Core
C-25, C-25HD
C-26, C-26HD
C-27, C-27HD
C-24, C-24HD
25'
50'
75'
100'
Drain Lines 3" to 6". Floor Drains, Vents, and Laterals. General purpose cable. Inner core provides greater
stiffness under load.
K-750
K-6200
K-7500
w/Hollow Core
C-27HC
C-24HC
75'
100' Drain Lines 3" to 6". Floor Drains, Vents, and Laterals. Hollow core cable is lighter in weight & more flexible. Helps operator
negotiate difficult traps & bends in large lines.
K-750
K-7500
3⁄4"
(20mm)
w/Inner Core
C-28
C-29
C-75
C-100
25'
50'
75'
100'
Drain Lines 4" to 10". Main Lines including Laterals.
Powerful cable used for heavy-duty blockages such as tree roots. Cable
tightens on core to provide extra stiffness under load, delivering power
to cutter.
K-750
K-7500
w/Hollow Core
C-75HC
C-100HC
75'
100' Drain Lines 4" to 6". Main Lines including Laterals. Hollow core cable is lighter in weight and more flexible.
Helps operator negotiate difficult traps and bends in large lines.
K-750
K-7500
Model Length Typical Application Characteristics Machines
5⁄8"
(16mm)
C-7 71⁄2'2" and 3" Floor Drains. Tight wind cable providing good rigidity in a hollow core cable.
Not for tree roots. K-50, K-60SP
C-8 71⁄2'Drain Lines 11⁄4" to 2". Ideal for proper cleaning of small
lines.
Open wind cable that is more flexible than C-7. Open wind acts as an auger
to thoroughly remove blockages in small lines. K-50, K-60SP
C-9 10' Drain Lines 2" to 4". Ideal for Floor Drains and Stacks. Heavy-Duty open wind cable ideal for long runs in indoor lines. K-50, K-60SP
7⁄8"
(22MM)
C-10 15' Drain Lines 2" to 4". Rooftop Vent Stacks. Standard all-purpose open wind. Excellent flexibility. K-60SP
K-1500A/B*
11⁄4"
(32mm)
C-11 15' Drain Lines 3" to 8". Good for all around work. Easily
negotiates 4" Traps.
Standard all-purpose open wind with 3⁄8" pitch. Flexible, yet rigid enough
to do fast, tough root cutting. K-1500A/B/& SP
C-12 15' Drain Lines 4" to 10". Do not use through 4" “P” Traps. Extra-heavy-duty open wind with 3⁄8" pitch. Designed for
4" to 10" long runs. K-1500A/B/& SP
C-14 15' Drain Lines 3" to 10". Do not use through 4" “P” Traps. Heavy-duty open wind with 1⁄2" pitch. Especially good For 4" cleanout
or 8" elbow entering in 4" to 10" line. K-1500A/B& SP
C-15 15' Drain Lines 3" to 6". Ideal for 4" Traps. Extra-flexible open wind with 1⁄2" pitch. Lighter than C-11, slightly stiffer. K-1500A/B
*See Page 12.29 for Proper Jawset.
*See Page 12.25 for Proper Adapter or Sink Drum.
For Drum Machines
12.5
DRAIN CLEANING
Drop Head Auger
For cleaning back to back mounted
fixtures e.g., sinks where cable needs to
be led into down pipe.
Straight Auger
For use in exploring and breaking
up stoppages or returning sample to
surface to determine correct tool.
Hook Auger
For heavy and dense root stoppages
in pipes that require hooking and
breaking up.
Retrieving Auger
For searching for cable which is broken
or lost in line.
Spade Cutter
For following up after augers have been
used and to open up floor drains.
Four Blade Saw Tooth Cutter
For blockages caused by hardened,
glazed material such as chemical
deposits.
Grease Cutter
For lines which have become badly
greased with detergents and have
to be opened.
Spiral Saw Tooth Cutter
For clearing any stoppage, roots, rags,
sticks, etc.
Spiral Bar Cutter
For main sewers blocked by roots,
leaf debris, sticks, sawdust, cloth, and
sacking.
Grease “C” Cutter
For grease blockage in lines leading from
garbage disposal unit or waste pipe.
Expanding Finish Cutters
For final removal of material adhering to
walls and certain roots of fibrous nature.
Chain Knocker
For use when vigorous action is required
for cleaning of scale in pipes and boiler
tubes.
Flue Brush
For use for finish cleaning required of
boiler tubes and heat exchangers.
Always start with a straight auger to try and determine
what you are trying to clean. Then chose the correct
cutter to clear the drain.
Funnel Auger
For use as second tool in line. Breaks
up remains of stoppage left by straight
auger.
Saw Tooth Cutter
For cleaning lines blocked heavily with
roots. Unique design permits cutter to
be removed from damaged pipe without
locking.
Sharktooth Cutter
For use in cleaning pipes of general
material clinging to pipe walls.
DRAIN CLEANING
12.6
K-1 Combination Auger
• Quickly opens urinal, oor and toilet drains.
• Breaks up hard and soft blockages
• Increased cable exibility and kink resistance
• Dual powered – Operate manually or attach a drill for maximum power.
• Telescoping Design – provides longer cable.
Specifications
• Pipe Capacity – Up to 21/2"
Catalog
No.
Model
No. Description Weight
lb. kg
46683 K-1 K-1 Combination Auger 52.3
Toilet/Urinal Augers
K-3 and K-6 Toilet Augers
High quality tools in 3' (1 m) and 6' (2 m) lengths provide fast and safe clearing of toilet
obstructions.
• Vinyl guard to protect porcelain.
• New durable, kink-resistant, 1/2" (12.7 mm) compression-wrapped Inner Core Cable.
• Large, ergonomically designed handles.
• Negotiate water-conserving toilets.
Catalog
No.
Model
No. Description Weight Replac.
Cables
lb. kg
59787 K-3 3' (1 m) Toilet Auger w/Bulb Head 41/21.9 -
59797 K-6 6' (2 m) Toilet Auger w/Bulb Head 51/22.5 60362
59802 K-6 DH 6' Toilet Auger w/Drop Head 51/22.5 60367
12.7
DRAIN CLEANING
K-5 Grappler Hook
• Retrieves rocks, tools, objects.
• Extends your reach 6' (2 m) for even the deepest traps.
Catalog
No.
Model
No. Description Weight
lb. kg
59190 K-5 Grappler Hook 52.3
61820 K-5 Replacement Jaws 00.2
Grappler Hook
One-Piece Flat Sewer Tape
• Sizes and lengths for use on sewer and drain lines through 8" (200 mm) in diameter and
up to 100' (30.4 m) in length.
• Carrier included with all except 25' (7.6 m) model.
• All models have a hand grip and a spear point at one end and roller ball at the other.
Catalog
No.
Model
No.
Width Thickness Length Capacity Weight
in. mm in. mm ft. m in. mm lb. kg
62530 E-2724 1/212 1/16 2257.6 3/4-1
1/220-40 31.4
62535 E-2725 1/212 1/16 25015.2 3/4-1
1/220-40 62.7
62540 E-2726 1/212 1/16 275 22.8 3/4-1
1/220-40 94.1
62545 E-2727 1/212 1/16 2 100 30.4 3/4-1
1/220-40 12 5.4
62555 E-2729 3/420 1/16 25015.2 2 - 4 50 - 110 83.6
62565 E-2731 3/420 1/16 2 100 30.4 2 - 4 50 - 110 18 8.2
62595 E-2737 3/420 1/835015.2 4 - 6 110 - 150 16 7.3
62605 E-2739 3/420 1/83 100 30.4 4 - 6 110 - 150 34 15.4
62615 E-2741 125
1/835015.2 4 - 8 110 - 200 22 10.0
62625 E-2743 125
1/83 100 30.4 4 - 8 110 - 200 45 20.4
Sewer Tape
DRAIN CLEANING
12.8
K-26 Hand Spinner
• Ideal for users seeking excellent performance and value.
• Slip-resistant collet chuck that grips/ungrips cable with the ick-of-the-wrist.
•5/16" x 25' hollow core cable with bulb head auger.
• Rotary molded plastic drum that won’t rust or dent – cleans easily.
• Open drum design that permits access to cable and allows application of cable rust
Inhibitor.
Catalog
No.
Model
No. Description
Cable
Diameter Length Weight
in. mm ft. m lb. kg
59812 K-26 Hand Spinner w/C1 Bulb Head Cable 5/16 8.0 25 7.6 62.70
Hand Spinners
K-25 Hand Spinner
For 3/4" (20 mm) to 11/2" (40 mm) Drain Lines.
• The professional’s choice for many years, the Model K-25 Hand Spinner offers premium
quality. It’s the ideal tool for the user who demands the best.
• Premium-quality, precision machined, 3-jaw chuck to rmly secure cable. Releases cable
with the ick-of-the-wrist.
• Cast aluminum ribbed hand grip that won’t slip in your hand.
• Rotary molded plastic drum that won’t dent or rust – cleans easily.
• Available in bulb head and drop head models. 5/16" (8 mm) x 25' (7.6 m) vinyl-wrapped
inner core, kink-resistant cables.
• Well balanced for comfortable operation.
• Drum Capacity: 5/16" (8 mm) x 25' (7.6 m).
• Works through traps and bends in sinks, tubs, drinking fountains, lavatories, urinals, vent
pipes.
Catalog
No.
Model
No. Description
Cable
Diameter Length Weight
in. mm ft. m lb. kg
58890 K-25-BP Hand Spinner with C-1IC Bulb Auger Cable 5/16 8.0 25 7.6 8 3.6
58895 K-25-DH Hand Spinner with C-2IC Drop Head Cable 5/16 8.0 25 7.6 8 3.6
Power Spin with AUTOFEED®
• Clears up to 11/2" (40 mm) lines.
• Pull trigger and turn handle, or add any variable speed (left / right) chuck drill machine for
extra power.
• Cable self-feeds down drain.
• No mess. Hands don’t touch cable.
• Equipped with 1/4" (6.3 mm) x 25" (7.6 m) cable with straight auger.
Specifications
• In. x Ft. – 1/4" x 25’ (6.3 mm x 7.6 m).
• Weight – 4.5 lbs (2.3 kg).
Catalog
No.
Model
No. Description Diameter Length Weight
in. mm ft. m lb. kg
41408 Power Spin Hand Spinner with Straight Auger 1/4625 852.2
42163 MaxCore Cable MaxCore Replacement Cable 1/4625 831.4
12.9
DRAIN CLEANING
Kwik-Spin®Hand Spinner with AUTOFEED®
• Light-duty product for drains up to 11/2" (40 mm).
• Comfortable hand grip eases effort.
• Equipped with 1/4" x 25" (6.3 mm x 7.6 m) Maxcore cable with straight auger.
• Two-way AUTOFEED®keeps hands and work area clean.
Catalog
No.
Model
No. Description Diameter Length Weight
in. mm ft. m lb. kg
41348 Kwik-Spin Hand Spinner with C-1IC Bulb Auger Cable 1/46.3 25 7.6 3.5 1.6
Hand Spinners
Auto-Clean™/K-30 Sink Machine
• Clean – Cable contained inside guide hose – minimizes clean-up of hands, work areas and
xtures.
• Immediate Results – Strong, durable MAXCORE®50 cable for tough blockages.
• Guide Hose – Cable contained in guide hose –minimizes clean-up of hands, work area and
xtures.
• AUTOFEED®– Conveniently powers cable down drain and through blockages. Aluminum
paddles advance cable 20% faster.
• MAXCORE™ 50 Cable – Includes 1/4" x 30' Inner core cable for increased strength and
longer life. Provides 50% more cleaning power for tough blockages.
Specifications
• Motor Rating – 115V, single phase, AC 1.1 Amp, 60Hz.
• Motor Operating Speed – 450 RPM.
• Cable – 1/4" x 30' MAXCORE™50.
• Line Capacity – 3/4"-1
1/2".
• CSA approved
Catalog
No.
Model
No. Description
Cable
Diameter Cable Length Weight
in. mm ft. m lb. kg
34963 Auto-Clean Auto-Clean Sink Machine 1/4630 910 4.50
34893 Auto-Clean Replacement Cable 1/4630 91/20.60
Sink Machines
DRAIN CLEANING
12.10
K-40 Sink Machine
For 3/4" (20 mm) to 21/2" (75 mm) Drain Lines.
•The Model K-40 Sink Machine is ideal for cleaning small secondary drain lines from 3/4"
(20 mm) to 21/2" (75 mm).
•1/4" (6 mm) cables best for 3/4" (20 mm) to 11/2" (40 mm) lines.
•5/16" (8 mm) cables best for 3/4" (20 mm) to 11/2" (40 mm) lines.
•3/8" (10 mm) cables best for 11/4" (40 mm) to 21/2" (75 mm) lines.
•The K-40 sits flat on the floor or countertop and also tips onto its back for easy access to
sink drains and bathtubs full of water. The K-40 practically eliminates job site cleanup
thanks to the patented Guide Hose two-way AUTOFEED®. It completely contains the
rotating cable and eliminates any waste water splashing or spraying.
•175 W induction motor quietly delivers enough torque to clear even the toughest
blockages.
•Premium-quality, compression-wound inner core cable combines strength and flexibility to
resist kinking.
•Two-piece “twist lock" drum housing will not dent or corrode and allows easy access to
the inner drum and cable.
•Special inner drum design virtually eliminates cable flip-over inside the drum and drum
leakage.
•Two-way AUTOFEED advances and retrieves the drain cleaning cable with a simple push
of a lever keeping you and the work area clean.
•Includes RIDGID®drain cleaning gloves and operator’s manual.
Catalog No. Model No. Description Voltage Weight
V lb. kg
71702 K-40 Machine with: C-13IC, 5/16" x 35' (10.7m) Cable w/Inner
Drum 115 29 13
71722 K-40AF
Machine with: AUTOFEED, Guide Hose, Mounting
Bracket, C-13IC SB, 5/16" x 35' (10.7m) Speed Bump Cable
w/Inner Drum
115 33 15
71727 K-40 Machine with: C-13IC, 5/16" x 35' (10.7m) Cable w/Inner
Drum 230 29 13
71732 K-40AF
Machine with: AUTOFEED, Guide Hose, Mounting
Bracket, C-13IC SB, 5/16" x 35' (10.7m) Speed Bump Cable
w/Inner Drum
230 33 15
78347 K-40B AF
Battery Powered Machine with: AUTOFEED, Guide Hose,
Mounting Bracket, C-13IC SB, 5/16" x 35" (10.7m) Cable
w/Inner Drum, (2) 14.4V Battery Packs, 14.4V Battery
Charger
-2411
Sink Machines
12.11
DRAIN CLEANING
Cables
Catalog No. Model No. Description Weight
lb. kg
50647 S-1 1/4" (6 mm) x 15' (4.6 m) with Funnel Auger 21/41
50652 S-2 1/4" (6 mm) x 25' (7.6 m) with Funnel Auger 31/22
50657 S-3 1/4" (6 mm) x 35' (10.7 m) with Funnel Auger 52
62225 C-1 5/16" (8 mm) x 25' (7.6 m) with Bulb Auger 31/22
56782 C-1IC 5/16" (8 mm) x 25' (7.6 m) Inner Core with Bulb Auger 42
89400 C-21 5/16" (8 mm) x 50' (15.2 m) Inner Core with Bulb Auger 73
56792 C-13IC 5/16" (8 mm) x 35' (10.7 m) Inner Core with Bulb Auger 51/22
95847 C-13ICSB 35' (10.7m) Inner Core Speed Bump with Bulb Auger 51/22
62235 C-2 5/16" (8 mm) x 25' (7.6 m) with Drop Head Auger 31/22
56787 C-2IC 5/16" (8 mm) x 25' (7.6 m) Inner Core with Drop Head Auger 42
89405 C-22 5/16" (8 mm) x 50' (15.2 m) with Drop Head Auger 73
56797 C-23IC 5/16" (8 mm) x 35' (10.7 m) Inner Core with Drop Head Auger 51/22
62245 C-4 3/8" (10mm) x 25' (7.6 m) with Male Coupling 41/22
62250 C-5 3/8" (10mm) x 35' (10.7 m) with Bulb Auger 81/44
62260 C-6 3/8" (10 mm) x 35' (10.7 m) with Male Coupling 81/44
96037 C-6IC 3/8" (10mm) x 35' (10.7 m) Inner Core with Male Coupling 81/24
Tools
Catalog No. Model No. Description Replac.
Blade(s)
62990 T-201 Straight Auger, 5" (125 mm) Long -
62995 T-202 Bulb Auger, 11/8" (29 mm) O.D. -
63000 T-203 Bulb Auger 7/8" (22 mm) O.D. -
54837 T-204 “C" Cutter 1" (25 mm) 54832
63005 T-205 “C" Cutter, 13/8" (35 mm) 97835
63010 T-206 Funnel Auger, 3" (80 mm) Long -
63030 T-210 Spade Cutter, 1" (25 mm) 97905
63035 T-211 Spade Cutter, 13/8" (35 mm) 97825
63040 T-212 Spade Cutter, 13/4" (45 mm) 92850
63045 T-213 4-Blade Cutter, 1" (25 mm) 97795
63050 T-214 4-Blade Cutter, 13/8" (35 mm) 97910
63055 T-215 4-Blade Cutter, 13/4" (45 mm) 97915
63065 T-217 Drop Head Auger, 4" (110 mm) Long -
-55457 T-225 Retrieving Auger -
-48482 T-250 Tool Set includes: T-203, T-205, T-210, T-217, A-13 -
Accessories
Catalog No. Model No. Description
-26558 A-40AF AUTOFEED Assembly & Guide Hose for K-40 Includes Mounting Bracket
-23913 A-39AF Replacement AUTOFEED Cartridge
71757 A-40G Guide Hose
-72702 A-40B Mounting Bracket
-83407 -14.4V Battery Pack
-83417 -115V Charger
-71847 -Torque Arm
-68917 -K-45 Inner-Drum
-76597 -Top Roller Bearing Housing Assy.
-76817 -C-6 Cable Kit incl. Inner Drum, C-6 Cable Torque Arm, T-250 Tool Set
-98072 -C-6IC Cable Kit including: Inner Drum, C-6IC Cable, Torque Arm, T-250 Tool Set
41937 -RIDGID Leather Drain Cleaning Gloves
70032 -RIDGID PVC Drain Cleaning Gloves
DRAIN CLEANING
12.12
K-45 Sink Machine
For 3/4" (20 mm) to 21/2" (75 mm) Drain Lines.
•1/4" (6 mm) cables best for 3/4" (20 mm) to 11/2" (40 mm) lines.
•5/16" (8 mm) cables best for 3/4" (20 mm) to 11/2" (40 mm) lines.
•3/8" (10 mm) cables best for 11/4" (30 mm) to 21/2" (75 mm) lines.
• Excellent for small line cleaning. Opens clogged lavatory, sink lines, urinals, and tub/
shower drains.
• Advanced two-way AUTOFEED®keeps hands and work area clean – advances & retrieves
cable with push of a lever.
• Manual Version has a slide action chuck for quick locking/releasing of cable (Not available
in Europe).
• Lightweight, easy-to-use, no setup required.
• Variable speed power unit rotates cable 0-600 RPMs.
• Two-piece twist lock canister with interchangeable inner drum – Makes cable changeout
simple; easy to match the right cable for the job.
• Inner drum prevents water leaks and greatly reduces cable ip-over inside the drum.
• Drums won't rust or dent-ever.
• Drum Capacity: 50' (15 m) of 5/16" (8 mm) or 35' (11 m) of 3/8" (10 mm).
• Includes RIDGID®drain cleaning gloves and operator’s manual.
• Approved by CSA to CSA and UL Standards (115V only).
Inner Core Cables.
• (Models C-1IC, C-6IC, C-13IC, C-2IC, C-23IC).
• Vinyl-wrapped inner core to prevent core from rusting to spring – enhances cable life.
• Compression wound for strength.
• Resists kinking; negotiates tough bends and traps.
• Provides good exibility and cleaning power to the cable end.
Catalog
No.
Model
No. Description Voltage Weight
V lb. kg
K-45AF
35473 K-45AF K-45AF Machine with: - C-1lC, 5/16" x 25' Inner Core Cable w/Inner Drum 115 11.0 5.0
36033 K-45AF Machine with: – C-1IC, 5/16" (8 mm) x 25' (7.6 m) Inner Core Cable w/
Inner Drum 230 13.8 6.5
35998 K-45AF-1 Same as Model No. K-45AF plus: C-6429 Carrying Case 115 27.0 12.2
36038 K-45AF-1 Same as Model No. K-45AF plus: C-6429 Carrying Case 230 27.0 12.2
36003 K-45AF-5
K-45AF Machine with: - C-1lC, 5/16" x 25' Inner Core Cable w/Inner Drum
- C-6, 3/8" x 35' Cable w/Inner Drum - T-250, Five -Piece Tool Set for 3/8"
Cable - C-6429 Carrying Case
115 34.0 15.4
36043 K-45AF-5
Machine with: – C-1IC, 5/16" (8 mm) x 25' (7.6 m) Inner Core Cable w/In-
ner Drum – C-6, 3/8" (10 mm) x 25' (10.7 m) Cable w/Inner Drum – T-250,
Five-Piece Tool Set for 3/8" (10 mm) Cable – C-6429 Carrying Case
230 34.0 15.4
36008 K-45AF-7
K-45AF Machine with: - C-1lC, 5/16" x 25' Inner Core Cable w/Inner Drum
- C-6, 3/8" x 35' Cable w/Inner Drum - C-21, 5/16" x 50' Cable w/Inner
Drum - T-250, Five -Piece Tool Set for 3/8" Cable - C-6429 Carrying Case
115 42.0 19.0
K-45
36018 K-45 K-45 Machine with: - C-1lC, 5/16" x 25' Inner Core Cable w/Inner Drum 230 11.0 5.0
36048 K-45 K-45 Machine with: - C-1lC, 5/16" x 25' Inner Core Cable w/Inner Drum 230 11.0 5.0
36013 K-45-1 Same as Model No. K-45 plus: C-6429 Carrying Case 230 11.0 5.0
36053 Same as Model No. K-45 plus: C-6429 Carrying Case 230 27.0 12.2
36023 K-45-5
K-45 Machine with: - C-1lC, 5/16" x 25' Inner Core Cable w/Inner Drum
- C-6, 3/8" x 35' Cable w/Inner Drum - T-250, Five -Piece Tool Set for 3/8"
Cable - C-6429 Carrying Case
115 34.0 15.4
36058 K-45
K-45AF Machine with: - C-1lC, 5/16" x 25' Inner Core Cable w/Inner Drum
- C-6, 3/8" x 35' Cable w/Inner Drum - T-250, Five -Piece Tool Set for 3/8"
Cable - C-6429 Carrying Case
230 34.0 15.4
36028 K-45-7
K-45AF Machine with: - C-1lC, 5/16" x 25' Inner Core Cable w/Inner Drum
- C-6, 3/8" x 35' Cable w/Inner Drum - C-21, 5/16" x 50' Cable w/Inner
Drum - T-250, Five -Piece Tool Set for 3/8" Cable - C-6429 Carrying Case
115 42.0 19.0
Sink Machines
12.13
DRAIN CLEANING
Cables
Catalog
No.
Model
No. Description Weight
lb. kg
1⁄4"-6 mm
Funnel Auger
50647 S-1 1/4" (6 mm) x 15' (4.6 m) with Funnel Auger 21/41.00
50652 S-2 1/4" (6 mm) x 25' (7.6 m) with Funnel Auger 31/21.60
50657 S-3 1/4" (6 mm) x 35' (10.7 m) with Funnel
Auger 5 2.20
5⁄16"-8 mm
Bulb Auger
62225 C-1 5/16" (8 mm) x 25' (7.6 m) with Bulb Auger 31/21.60
56782 C-1IC 5/16" (8 mm) x 25' (7.6 m) Inner Core with
Bulb Auger 4 1.80
89400 C-21 5/16" (8 mm) x 50' (15.2 m) Inner Core with
Bulb Auger 7 3.20
56792 C-13IC 5/16" (8 mm) x 35' (10.7 m) Inner Core with
Bulb Auger 51/22.50
Drop Head
62235 C-2 5/16" (8 mm) x 25' (7.6 m) with Drop Head
Auger 31/21.60
56787 C-2IC 5/16" (8 mm) x 25' (7.6 m) Inner Core with
Drop Head Auger 4 1.80
89405 C-22 5/16" (8 mm) x 50' (15.2 m) with Drop Head
Auger 7 3.20
56797 C-23IC 5/16" (8 mm) x 35' (10.7 m) Inner Core with
Drop Head Auger 51/22.50
3⁄8"-10 mm
62245 C-4 3/8" (10mm) x 25' (7.6 m) with Male
Coupling 41/22.00
62250 C-5 3/8" (10mm) x 35' (10.7 m) with Bulb Auger 81/43.80
62260 C-6 3/8" (10 mm) x 35' (10.7 m) with Male
Coupling 81/43.80
96037 C-6IC 3/8" (10mm) x 35' (10.7 m) Inner Core with
Male Coupling 81/24.00
Tools – Fits C-4, C-6 and C-6IC Cables
Catalog
No. Model No. Description
Replac.
Blade(s)
62990 T-201 Straight Auger, 5" (125 mm) Long -
62995 T-202 Bulb Auger, 1 1/8" (29 mm) O.D. -
63000 T-203 Bulb Auger 7/8" (22 mm) O.D. -
54837 T-204 “C" Cutter 1" (25 mm) 54832
63005 T-205 “C" Cutter, 1 3/8" (35 mm) 97835
63010 T-206 Funnel Auger, 3" (80 mm) Long -
63030 T-210 Spade Cutter, 1" (25 mm) 97905
63035 T-211 Spade Cutter, 1 3/8" (35 mm) 97825
63040 T-212 Spade Cutter, 1 3/4" (45 mm) 92850
63045 T-213 4-Blade Cutter, 1" (25 mm) 97795
63050 T-214 4-Blade Cutter, 1 3/8" (35 mm) 97910
63055 T-215 4-Blade Cutter, 1 3/4" (45 mm) 97915
63065 T-217 Drop Head Auger, 4" (110 mm) Long -
-55457 T-225 Retrieving Auger -
52812 T-230 H-D “C" Cutter, 2" (50 mm) 92815
52817 T-231 H-D “C" Cutter, 2 1/2" (65 mm) 92820
52822 T-232 H-D “C" Cutter, 3" (80 mm) 92835
-48482 T-250 Tool Set includes: T-203, T-205, T-210, T-217,
A-13 -
Accessories
Catalog
No. Model No. Description
68917 -K-45 Inner-Drum
89410 C-6429 Carrying Case
76817 -C-6 Cable Kit incl. Inner Drum, C-6 Cable Torque Arm, T-250 Tool Set
98072 -C-6IC Cable Kit including: Inner Drum, C-6IC Cable, Torque Arm, T-250 Tool Set
23908 A-39AF Drum Front and AUTOFEED Assembly
23913 A-39AF Replacement AUTOFEED Cartridge
41937 -RIDGID Leather Drain Cleaning Gloves
70032 -RIDGID PVC Drain Cleaning Gloves
DRAIN CLEANING
12.14
K-400 Drum Machine
For 11/2" (30 mm) to 4" (110 mm) Drain Lines.
• The Model K-400 offers several unique, user-friendly features to make the toughest drain
cleaning jobs easier and hassle-free. Designed with a sleek prole, the Model K-400 is
a great t for drain cleaners, service plumbers, facility and institutional maintenance
departments and property management companies.
•3/8" (10 mm) cable best for 11/2" (40 mm) to 3" (75 mm) lines.
•1/2" (12 mm) cable best for 3" (50 mm) to 4" (110 mm) lines.
• Integrated Transport Cart – allows for easy movement to and from the job site. Heavy-
duty, large wheels easily navigate over bumps and up stairs.
• Integrated Telescoping Handle – provides high-handle height during transport.
• Cable Control System – causes the drum to stop spinning when the blade becomes lodged
in a blockage, limits potential for cable to ip-over in the drum and helps to indicate to
operator when blockages are encountered.
• "Solid Core" Cable – uses tough 3/8" (10 mm) or 1/2" (12 mm) Integral Wound (IW) solid
core cable that is rugged and kink resistant.
• AUTOFEED – offered as an accessory, this patented, automatic cable feed powers cable
in and out of the drain. Reverse the direction of the AUTOFEED and the cable feeds back
into the drum.
Specifications
• Drum Capacity – 100' (30.5 m) of 3/8" (10 mm) Diameter Cable or 75' (22.5 m) of 1/2" (12
mm) Diameter Cable.
• Motor – 380W, 230V motor spins cable at 165 RPM.
• Weight (Machine Only) – 45 lbs. (20.4 kg).
• Dimensions – Length 21" (53 cm) 24" (61 cm) with AUTOFEED, Height 23" (58.5 cm) Width
17" (43.2 cm).
• All Model K-400 machines are supplied with RIDGID®drain cleaning gloves, operator’s
manual and instructional video.
Catalog
No. Model No. Description Voltage Weight
V lb. kg
24853 K-400 w/C-32 IW K-400 Machine w/Gloves & Std. Equipment: C-32 IW 3/8" x 75' Solid Core (Integral Wound) Cable, T-260 Tool Set 115 68 31.0
26993 K-400 w/C-31 IW K-400 Machine w/Gloves & Std. Equipment: C-31 IW 3/8" x 50' Solid Core (Integral Wound) Cable, T-260 Tool Set Includes: T-202
Bulb Auger, T-205 “C" Cutter, T-211 Spade Cutter, A-13 Coupling Pin 115 60 27.2
26998 K-400 w/C-45 IW K-400 Machine w/Gloves & Std. Equipment: C-45 IW 1/2" x 75' Solid Core (Integral Wound) Cable, T-260 Tool Set 115 81 37.0
27003 K-400 w/C-44 IW K-400 Machine w/Gloves & Std. Equipment: C-44 IW 1/2" x 50' Solid Core (Integral Wound) Cable, T-260 Tool Kit 115 68 31.0
27008 K-400 AF w/C-32 IW K-400 Machine w/Gloves & Std. Equipment: Two-Wheel Cart, AUTOFEED, C-32 IW 3/8" x 75' Solid Core (Integral Wound) Cable,
T-260 Tool Set 115 79 36.0
27013 K-400 AF w/C-45 IW K-400 Machine w/Gloves & Std. Equipment: AUTOFEED, C-45 IW 1/2" x 75' Solid Core (Integral Wound) Cable, T-260 Tool Set 115 93 42.0
Drum Machines
12.15
DRAIN CLEANING
Catalog
No. Model No. Description Weight
lb. kg
3⁄8"-10 mm
87577 C-31IW 3/8" (10 mm) x 50' (15 m) IW Cable 18.0 8.2
87582 C-32IW 3/8" (10 mm) x 75' (23 m) IWCable 26.0 11.8
87587 C-33IW 3/8" (10 mm) x 100' (30 m) IW Cable 34.0 15.4
1⁄2"-12 mm
91037 -Repair End for 3/8" (10 mm) IW Cable 0.5 0.2
87592 C-44IW 1/2" (12 mm) x 50' (15 m) IW Cable 18.0 8.2
87597 C-45IW 1/2" (12 mm) x 75' (23m) IW Cable 26.0 11.8
91042 -Repair End for 1/2" (12 mm) IW Cable 0.6 0.3
Tools
Catalog
No. Model No. Description Replac.
Blade(s)
62990 T-201 Straight Auger, 5" (125 mm) Long -
62995 T-202 Bulb Auger, 11/8" (29 mm) O.D. -
63000 T-203 Bulb Auger 7/8" (22 mm) O.D. -
54837 T-204 “C" Cutter 1" (25 mm) 54832
63005 T-205 “C" Cutter, 13/8" (35 mm) 97835
63010 T-206 Funnel Auger, 3" (80 mm) Long -
63030 T-210 Spade Cutter, 1" (25 mm) 97905
63035 T-211 Spade Cutter, 13/8" (35 mm) 97825
63040 T-212 Spade Cutter, 13/4" (45 mm) 92850
63045 T-213 4-Blade Cutter, 1" (25 mm) 97795
63050 T-214 4-Blade Cutter, 13/8" (35 mm) 97910
63055 T-215 4-Blade Cutter, 13/4" (45 mm) 97915
63065 T-217 Drop Head Auger, 4" (110 mm) Long -
-55457 T-225 Retrieving Auger -
52812 T-230 H-D “C" Cutter, 2" (50 mm) 92815
52817 T-231 H-D “C" Cutter, 21/2" (65 mm) 92820
52822 T-232 H-D “C" Cutter, 3" (80 mm) 92835
-48482 T-250 Tool Set includes: T-203, T-205, T-210, T-217,
A-13 -
-12128 T-240 Tool Set (3/8"- K-380): T-202 Bulb Auger, T-211
Spade Cutter, A-13 Pin Key -
-49002 T-260
Tool Set [3/8" (10 mm) - K-400] Includes: – T-202
Bulb Auger – T-205 “C” Cutter – T-211 Spade
Cutter – A-13 Pin Key
-
Accessories
Catalog
No. Model No. Description Weight
lb. kg
41937 RIDGID Leather Drain Cleaning Gloves 1/20.20
70032 RIDGID PVC Drain Cleaning Gloves 1/20.20
59230 A-13 Pin Key For 3/8" (10 mm) Cable 1/20.20
26773 K-400 AutoFeed Assembly 20.90
-27048 K-400 Drum Assembly 10 4.50
-92607 3/8"x1/2" Tool Adaptor 1/20.20
-92682 3/8"x1/2" Drop Head Adaptor 1/20.20
-92687 Drop Head Tool Adaptor 1/2" (12 mm) 1/20.20
-26778 Guide Hose 20.90
-51317 C-9 5/8" x 10' (3,1 m) Heavy- Duty Wind 52.20
TO ATTACH TOOL
SLIDE TOGETHER
TO REMOVE TOOL
INSERT PIN
Always start with a straight auger to and determine
what you are trying to clean. Then chose the correct
cutter to clear the drain.
DRAIN CLEANING
12.16
K-3800 Drum Machine
For 3/4" (20 mm) to 4" (110 mm) Drain Lines.
• A powerful, easy to transport, versatile machine for cleaning indoor drains. Requires
minimal set-up to clean sink lines, oor drains and roof vents.
• Rugged, corrosion-resistant molded cable drum won’t dent or rust. The drum tilt adjusts
for proper cable feed angle. Inner-drum guards against cable ip-over inside the drum.
• Cable drum’s quick-release and built-in hand-holds allow easy cable change and transport.
• Maximum drum capacity is 100' (30.5 m) of 3/8" (10 mm) or 90' (27 m) of 1/2" (12 mm)
continuous length cable.
•3/8" (10 mm) cable best for 11/2" (40 mm) to 3" (75 mm) lines up to 100' (30,5 m).
•1/2" (12 mm) cable best for 2" (50 mm) to 4" (110 mm) lines up to 90' (27 m).
• Optional sink drum holds up to 50' (15 m) of 5/16 (8 mm) or 1/4(6 mm) cable.
• Ideal for cleaning through 3/4" (20 mm) to 11/2" (40 mm) sink traps.
• Powerful 175W Universal Motor spins cable at 240 RPM. When cable hits blockage,
motor gears down automatically to deliver more power and enhance operator control.
• Tools connect to cable in seconds.
• Optional heavy duty AUTOFEED®system.
• Includes RIDGID®leather drain cleaning gloves and operator’s manual.
Machine Options
Catalog
No.
Model
No. Description Voltage Weight
v lb. kg
53107 K-3800 K-3800 Machine w/Gloves 115
53112 K-3800
w/C-31
K-3800 Machine w/Std. Equip: C-31, 3/8" x 50' Cable, T-202 Bulb
Auger, T-205 “C" Cutter, T-211 Spade Cutter, A-13 Pin Key, Pair of
Gloves
115
53117 K-3800
w/C-32
K-3800 Machine w/Std. Equip: C-32, 3/8" x 75' Cable, T-202 Bulb
Auger, T-205 “C" Cutter, T-211 Spade Cutter, A-13 Pin Key, Pair of
Gloves
115 71 32.2
53122 K-3800
w/C-45
K-3800 Machine w/Std. Equip: C-45, 1/2" x 75' Cable, T-102 Funnel
Auger, T-142 Knife Blade Cutter, T-107 Spade Cutter, A-12 Pin Key,
Pair of Gloves
115 65 29.3
53127 K-3800
w/C-46
K-3800 Machine w/Std. Equip: C-46, 1/2" x 90' Cable, T-102 Funnel
Auger, T-142 Knife Blade Cutter, T-107 Spade Cutter, A-12 Pin Key,
Pair of Gloves
115 91 41.3
59462 K-3800 K-3800 Machine w/Gloves 230 42 19.0
63822 K-3800
w/C-45
K-3800 Machine w/Std. Equip: C-45, 1/2" x 75' Cable, T-102 Funnel
Auger, T-142 Knife Blade Cutter, T-107 Spade Cutter, A-12 Pin Key,
Pair of Gloves
230 83 37.7
63827 K-3800
w/C-32
K-3800 Machine w/Std. Equip: C-32, 3/8" x 75' Cable, T-202 Bulb
Auger, T-205 “C" Cutter, T-211 Spade Cutter, A-13 Pin Key, Pair of
Gloves
230 71 32.2
Drum Machines
For C-4, C-6, C-6IC, C-7, C-8, C-9, C-10, C-11, C-12, C-14, C-15, C-31, C-32, C-33,
C-44, C-45, and C-46 & all IW Cables.
TO ATTACH TOOL
SLIDE TOGETHER
TO REMOVE TOOL
INSERT PIN
12.17
DRAIN CLEANING
Inner Core (IC) Cables
Catalog
No.
Model
No. Description Weight
lb. kg
3⁄8"-10 mm
37842 C-31 3/8" x 50' (15 m) IC Cable 18 8.20
37847 C-32 3/8" x 75' (23 m) IC Cable 26 11.80
37852 C-33 3/8" x 100' (30 m) IC Cable 34 15.40
51752 T-122 Repair End, 3/8" (10 mm) 10.50
1⁄2"-12 mm
37857 C-44 1/2" x 50' (15 m) IC Cable 27 12.20
37862 C-45 1/2" x 75' (23 m) IC Cable 39 17.70
37867 C-45HC 1/2" x 75' (23 m) Hollow Core Cable 38 17.20
55467 C-46 1/2" x 90' (28 m) IC Cable 47 21.20
59917 T-121 Repair End, 1/2" (12 mm) 3/40.80
Integral Wound (IW) Cables
Catalog
No.
Model
No. Description Weight
lb. kg
3⁄8"-10 mm
87577 C-31IW 3/8" (10 mm) x 50' (15 m) IW Cable 18 8.2
87582 C-32IW 3/8" (10 mm) x 75' (23 m) IWCable 26 11.8
87587 C-33IW 3/8" (10 mm) x 100' (30 m) IW Cable 34 15.4
91037 Repair End for 3/8" (10 mm) IW Cable 1/20.2
1⁄2"-12 mm
87592 C-44IW 1/2" (12 mm) x 50' (15 m) IW Cable 18 8.2
87597 C-45IW 1/2" (12 mm) x 75' (23 m) IW Cable 26 11.8
91042 -Repair End for 1/2" (12 mm) IW Cable 3/50.3
Sink Drum Cables
Catalog
No.
Model
No. Description Weight
lb. kg
1⁄4"-6 mm
50652 S-2 1/4" (6 mm) x 25' (7.6 m) with Funnel
Auger 31/21.60
50657 S-3 1/4" (6 mm) x 35' (10.7 m) with Funnel
Auger 52.20
5⁄16"-8 mm
56782 C-1IC 5/16" (8 mm) x 25' (7.6 m) Inner Core
with Bulb Auger 41.80
56792 C-13IC 5/16" (8 mm) x 35' (10.7 m) Inner Core
with Bulb Auger 51/22.50
56787 C-2IC 5/16" (8 mm) x 25' (7.6 m) Inner Core
with Drop Head Auger 41.80
56797 C-23IC 5/16" (8 mm) x 35' (10.7 m) Inner Core
with Drop Head Auger 51/22.50
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
55002 A-380 Standard Drum for 3/8" (10 mm), 1/2" (12
mm) Cable 121/25.60
55007 A-381 Sink Drum for 5/16" (8 mm), 1/4"(6mm)
Cable 121/25.60
55012 A-381-A Sink Drum with 25' (7.6 m) x 5/16"(8mm)
IC Cable w/Bulb Head 161/27.50
41937 -RIDGID Leather Drain Cleaning Gloves 1/20.20
70032 -RIDGID PVC Drain Cleaning Gloves 1/20.20
59230 A-13 Pin Key For 3/8" (10 mm) Cable 1/20.20
59225 A-12 Pin Key For 1/2" (12 mm) Cable 1/20.20
55017 -Transport Cart 18 8.20
60087 A3800 PF AUTOFEED®Assembly 73/83.30
-62412 -Guide Hose Adapter for Sink Drum 31/21.60
Tools Fit 3/8" (10 mm) IC, 3/8" (10 mm) IW and 1/2" (12 mm) IW Cables
Catalog
No.
Model
No. Description
Replac.
Blade(s)
62990 T-201 Straight Auger, 5" (125 mm) Long -
62995 T-202 Bulb Auger, 11/8" (29 mm) O.D. -
63000 T-203 Bulb Auger 7/8" (22 mm) O.D. -
54837 T-204 “C" Cutter 1" (25 mm) 54832
63005 T-205 “C" Cutter, 13/8" (35 mm) 97835
52812 T-230 H-D “C" Cutter, 2" (50 mm) 92815
52817 T-231 H-D “C" Cutter, 21/2" (65 mm) 92820
52822 T-232 H-D “C" Cutter, 3" (80 mm) 92835
63010 T-206 Funnel Auger, 3" (80 mm) Long -
63015 T-207 Spiral Cutter, 11/4" (32 mm) 97840
63020 T-208 Spiral Cutter, 11/2" (40 mm) 97895
63025 T-209 Spiral Cutter, 2" (50 mm) 97900
63030 T-210 Spade Cutter, 1" (25 mm) 97905
63035 T-211 Spade Cutter, 13/8" (35 mm) 97825
63040 T-212 Spade Cutter, 13/4" (45 mm) 92850
63045 T-213 4-Blade Cutter, 1" (25 mm) 97795
63050 T-214 4-Blade Cutter, 13/8" (35 mm) 97910
63055 T-215 4-Blade Cutter, 13/4" (45 mm) 97915
63060 T-216 Chain Knocker, 2" (50 mm) 98000
63065 T-217 Drop Head Auger, 4" (110 mm) Long -
-55457 T-225 Retrieving Auger -
-12128 T-240 Tool Set (3/8"- K-380): T-202 Bulb Auger,
T-211 Spade Cutter, A-13 Pin Key -
-49002 T-260
Tool Set [3/8" (10 mm) - K-400] Includes:
– T-202 Bulb Auger – T-205 “C" Cutter
– T-211 Spade Cutter – A-13 Pin Key
-
Tools Fit 1/2" (12 mm) IC Cables
Catalog
No.
Model
No. Description
Replac.
Blade(s)
62850 T-101 Straight Auger -
62855 T-102 Funnel Auger -
62865 T-104 "H" Cutter, 21/2" (65 mm) 97800
62870 T-105 Grease Cutter, 21/2" (65 mm) 97920
62875 T-106 Grease Cutter, 31/2" (87 mm) 97925
62880 T-107 Spade Cutter, 13/4" (45 mm) 92850
62930 T-112 4-Blade Cutter, 13/4" (45 mm) 97915
62935 T-113 4-Blade Cutter, 3" (75 mm) 97910
62940 T-114 Chain Knocker for 4" lines 97985
-27642 T-125 Straight Retrieving Auger -
54842 T-141 Knife Blade Cutter 11/2" (40 mm) 54847
54852 T-142 Knife Blade Cutter 21/2" (65 mm) 97800
-54992 T-270
Tool Set: – T-102 Funnel Auger – T-142
Knife Blade Cutter – T-107 Spade Cutter
– A-12 Pin Key
-
-92687 Drop Head Tool Adaptor 1/2" (12 mm) -
DRAIN CLEANING
12.18
K-6200 Drum Machine
For 3" to 6" (75-150mm) Drain/Sewer Lines.
• Superior maneuverability and a small footprint allow easy access to tight work areas. The
K-6200 comes equipped with either IC (Inner Core) cable or IW (Integral Wound) cable.
Recommend 5/8" cable for 3" to 6" drain lines up to 200'.
• Patented Cable Control System – Causes the drum to slow down when the blade becomes
lodged in a blockage. Limits potential for cable ipover.
• Direct Drive Design – 4/10 HP universal motor and gearbox bear down as torque builds.
Audible warnings let operator know when blockage is encountered. Drum requires no
adjustments to stay aligned and tight on drive shaft.
• Easy Maintenance Construction – Separate drum and machine in seconds. Inner drum and
guide tube remove easily to maintain or replace cable.
• Designed Durable and Stable – Low center of gravity frame design and custom kickstand
keep machine rmly anchored during operation. Rugged, corrosion-resistant polyethylene
drum is rust and dent proof. Double tubular frame is lightweight and designed for extra
strength.
• AUTOFEED and Standard Accessories – Powerful feed mechanism is built to last and is
easily maintained. Autofed, toolbox and selection of cutters included in all models.
• CSA approved.
• Approved to UL standards (NRTLC).
Standard Equipment
• 58192 – 5/8" (16 mm) x 100' HC Cable (30.5m).
• 59360 – Tool Box.
• 70032 – RIDGID PVC Drain Cleaning Gloves.
• 92495 – Spade Cutter, 13/4" (45 mm).
• 92510 – Double Cutter, 2" (50 mm).
• 92520 – Double Cutter, 3" (75 mm).
• 92525 – Double Cutter, 4" (110 mm).
• 92555 – 5/8" (16 mm) x 2' (50 mm) Leader.
Specifications
• Line Capacity – 3"- 6" Lines, Up to 200 feet.
• Drum Capacity – 100' of 5/8" Cable.
• Weight (Machine & 100 ft. of Cable) – 180 lbs.
• Length – 291/2".
• Height – 431/2" (Max).
• Width – 183/4".
Motor
• Type – 115V/6 0 Hz, Reversible, Universal AC Motor.
• Rating – 4/10 HP, 285 RPM.
• Amps – 5.6.
Machine Options
Catalog
No. Model No. Description Weight
lb. kg
93557 K-6200 w/C-24-IW Machine, Standard Accessories and 5/8" x 100' IW Solid
Core Cable 180 81.8
95732 K-6200 w/C-24 Machine, Standard Accessories and 5/8" x 100' Inner Core Cable 180 81.8
95737 K-6200 Machine w/5/8" Pigtail & Standard Accessories 98 44.5
Drum Machines
12.19
DRAIN CLEANING
Cables and Leaders
Catalog
No. Model No. Description Weight
lb. kg
37628 C-25 HD 25' HD Cable (7.6m) 24 10.90
5⁄8"-16 mm
37633 C-26 HD 50' HD Cable (15.2m) 43 19.50
37638 C-27 HD 75' HD Cable (30.5m) 63 28.60
37643 C-24 HD 100 HD Cable (30.5m) 84 38.10
43647 C-24 5/8" (16 mm) x 100' IC Cable (30.5m) 84 38.10
44122 5/8" (16 mm) Pigtail, 4 1/2' (1.4 m) Long 21/21.13
58192 C-24HC 5/8" (16 mm) x 100' HC Cable (30.5m) 701/232.10
92460 C-25 5/8" (16 mm) x 25' IC Cable (7.6m) 24 10.90
92465 C-26 5/8" (16 mm) x 50' IC Cable (15.2m) 43 19.50
92470 C-27 5/8" (16 mm) x 75' IC Cable (22.9m) 63 28.60
92555 T-458 5/8" (16 mm) x 2' (50 mm) Leader 20.85
95737 K-6200 Machine w/5/8" Pigtail & Standard
Accessories 98 44.54
32737 C-27HC 5/8" (16 mm) x 75' HC Cable (23) 523/423.90
Tools and Replacement Blades – Fit 5/8” (16 mm) and 3/4” (20 mm) Cables
Catalog
No. Model No. Description Replac.
Blade(s)
Replac.
Holder
51762 T-409 H-D Bulb Auger, 13/4" (45 mm) --
92485 T-403 P-Trap Cutter, 3" (75 mm) 92835 92900
92490 T-404 P-Trap Cutter, 31/2" (87 mm) 92840 92900
92495 T-406 Spade Cutter, 13/4" (45 mm) 92850 92915
-92500 T-407 Retrieving Auger 29⁄16" (65 mm) --
92505 T-408 Sawtooth Cutter, 3" (75 mm) 92890 92915
92510 T-411 Double Cutter, 2" (50 mm) 92815 92905
92515 T-412 Double Cutter, 21/2" (65 mm) 92820 92905
92520 T-413 Double Cutter, 3" (75 mm) 92825 92910
92525 T-414 Double Cutter, 4" (110 mm) 92830 92910
92530 T-416 Double Cutter, 6" (150 mm) 92855 92910
92535 T-432 3-Blade Cutter 2" (50 mm) 92860 92895
92540 T-433 3-Blade Cutter 3" (75 mm) 92865 92895
92545 T-434 3-Blade Cutter 4" (110 mm) 92870 92895
92550 T-436 3-Blade Cutter 6" (150 mm) 92875 92895
92485 T-403 P-Trap Cutter, 3" (75 mm) 92835 92900
Accessories
Catalog
No. Description
49032 Front Guide Hose Assembly
59360 Tool Box
70032 RIDGID PVC Drain Cleaning Gloves
91047 5/8" IW Cable Repair Coupling
95792 Swivel Loading Wheel Assembly
95797 Lifting Hook - K-6200
95802 K-6200 Drum Assy. w/5/8" Pigtail
95807 K-3800 Drum Assy. w/6200 Adapters
95812 AUTOFEED – K-6200
95822 K-3800 to K-6200 Adapter Kit Only
DRAIN CLEANING
12.20
K-750 Drum Machine
For 3" to 8" (75-200 mm) Drain/Sewer Lines.
• Powerful, self-contained machine ideal for lateral lines. Easy to transport, minimal set-up
– attach a tool and go.
• Autofeed advances, retrieves cable with a push of a lever, up to 20' (6 m) per minute.
• Versatile AUTOFEED®control adjusts for either 5/8" (16 mm) or 3/4" (20 mm) cable with a
twist of a screwdriver.
• Cable spins at 200 RPM.
• Tough, corrosion-resistant cable drum withstands harsh treatment and abuse. It will not
dent or corrode and cleans easily.
• Drum holds 100' (30,5 m) of 3/4" (20 mm) or 125' (35 m) of 5/8" (16 mm) cable and is
designed for quick, easy removal.
• Well-balanced design gives machine a lightweight “feel." Transport wheels ease loading
into service truck/van.
• Equipped with 550W induction motor.
Standard 3/4" (20 mm) Tool Set Includes
• T-406 Spade Cutter
• T-407 Retrieving Auger
• T-411 2" (50 mm) Cutter
• T-413 3" (75 mm) Cutter
• T-414 4" (110 mm) Cutter
Standard 5/8" (16 mm)Tool Set Includes
• T-403 3" (75 mm) P-Trap Cutter
• T-407 Retrieving Auger
• T-406 Spade Cutter
• T-411 2" (50 mm) Cutter
• T-413 3" (75 mm) Cutter
• Approved by CSA to CSA and UL Standards (115V only).
• Includes RIDGID PVC drain cleaning gloves and operators manual.
Standard Equipment
• 41937 – RIDGID Leather Drain Cleaning Gloves.
Machine Options
Catalog
No. Model No. Description Voltage Weight
V lb. kg
41977 K-750 Machine with Gloves and AUTOFEED - 3/4" Pigtail 115 114 51.9
51402 K-750 Machine with Gloves and AUTOFEED - 5/8" Pigtail 115 113 51.3
42002 K-750 w/C-75 Machine with One Pair of Gloves, AUTOFEED, Standard
3/4" Tool Set, and: C-75, 75' x 3/4" Cable 115 206 93.6
42007 K-750 Machine with One Pair of Gloves, w/C-100 AUTOFEED,
Standard 3/4" Tool Set, and: C-100, 100' x 3/4" Cable 115 234 106.3
42012 K-750 w/C-27 Machine with One Pair of Gloves, AUTOFEED, Standard
5/8" Tool Set, and: C-27, 75' x 5/8" Cable 115 182 82.7
47047 K-750 w/C-24 Machine with One Pair of Gloves, AUTOFEED, Standard
5/8" Tool Set, and: C-24, 100' x 5/8" Cable 115 182 82.7
44202 K-750 Machine with Gloves and AUTOFEED - 3/4" Pigtail 230 114 51.9
51407 K-750 Machine with Gloves and AUTOFEED - 5/8" Pigtail 230 113 51.3
44212 K-750 Machine with One Pair of Gloves, w/C-100 AUTOFEED,
Standard 3/4" Tool Set, and: C-100, 100' x 3/4" Cable 230 234 106.3
44217 K-750 w/C-27 Machine with One Pair of Gloves, AUTOFEED, Standard
5/8" Tool Set, and: C-27, 75' x 5/8" Cable 230 182 82.7
Drum Machines
Blade
Blade Holder
Coupling*
Fastener*
Drum Tool Assembly
*Includes Coupling and Fastener
12.21
DRAIN CLEANING
Inner Core (IC) Cables
Catalog
No.
Model
No. Description Weight
lb. kg
5⁄8"-16 mm
92460 C-25 5/8" (16 mm) x 25' IC Cable (7.6 m) 24 10.9
92465 C-26 5/8" (16 mm) x 50' IC Cable (15.2 m) 43 19.5
92470 C-27 5/8" (16 mm) x 75' IC Cable (22.9 m) 63 28.6
43647 C-24 5/8" (16 mm) x 100' IC Cable
(30.5m) 84 38.1
3⁄4"-20 mm
92475 C-28 3/4" (20 mm) x 25' IC Cable (7.6 m) 30 13.9
92480 C-29 3/4" (20 mm) x 50' IC Cable (15.2 m) 60 27.2
41212 C-75 3/4" (20 mm) x 75' IC Cable (22.9 m) 93 42.5
41697 C-100 3/4" (20 mm) x 100' IC Cable
(30.5m) 122 55.3
Hollow Core Cables
Catalog
No.
Model
No. Description Weight
lb. kg
5⁄8"-
16 mm
32737 C-27HC 5/8" (16 mm) x 75' HC Cable (23) 523/423.9
58192 C-24HC 5/8" (16 mm) x 100' HC Cable (30.5 m) 701/232.1
3⁄4"-20
mm
47427 C-75HC 3/4" (20 mm) x 75' HC Cable (23 m) 75 34.0
47432 C-100HC 3/4" (20 mm) x 100' HC Cable (30.5 m) 100 45.5
Leaders and Pig Tails
Catalog
No. Model No. Description Weight
lb.
92555 T-458 5/8" (16 mm) x 2' (50 mm) Leader 2
92560 T-468 3/4" (20 mm) x 2' (50 mm) Leader 23/4
44122 -5/8" (16 mm) Pigtail, 41/2' (1.4 m) Long 21/2
44117 -3/4" (20 mm) Pigtail, 6' (1.8 m) Long 31/2
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
41982 A-7534 Drum Assembly w/3/4" (20 mm) Pigtail 371/217.0
43637 A-7558 Drum Assembly w/5/8" (16 mm) Pigtail 33 15.0
43642 A-75 AUTOFEED Assembly 8 3.5
41937 -RIDGID Leather Drain Cleaning Gloves 1/20.2
41992 A-75PF C-100IC Kit w/Tools, 3/4" (20 mm) x
100' (30.5 m) 8 3.5
49032 -Front Guide Hose Assembly 3 1.3
59360 A-3 Tool Box 5 2.3
70032 -RIDGID PVC Drain Cleaning Gloves 1/20.2
Repair Fittings
Catalog
No.
Model
No. Description Weight
oz. g
31487 A-7570 5/8" (16 mm) Repair Splicer 11/243
31492 A-7571 3/4" (20 mm) Repair Splicer 2 57
92805 A-6582 5/8" (16 mm) Male Coupling 1 28
92810 A-6583 5/8" (16 mm) Female Coupling 2 57
92880 B-6840 3/4" (20 mm) Male Coupling 1 28
92885 B-6841 3/4" (20 mm) Female Coupling 2 57
Tools and Replacement Blades – Fit 5/8” (16 mm) and 3/4” (20 mm) Cables
Catalog
No.
Model
No. Description Replac.
Blade(s)
Replac.
Holder
92485 T-403 P-Trap Cutter, 3" (75 mm) 92835 92900
92490 T-404 P-Trap Cutter, 31/2" (87 mm) 92840 92900
92495 T-406 Spade Cutter, 13/4" (45 mm) 92850 92915
92500 T-407 Retrieving Auger 29⁄16" (65 mm) --
92505 T-408 Sawtooth Cutter, 3" (75 mm) 92890 92915
51762 T-409 H-D Bulb Auger, 13/4" (45 mm) --
92510 T-411 Double Cutter, 2" (50 mm) 92815 92905
92515 T-412 Double Cutter, 21/2" (65 mm) 92820 92905
92520 T-413 Double Cutter, 3" (75 mm) 92825 92910
92525 T-414 Double Cutter, 4" (110 mm) 92830 92910
92530 T-416 Double Cutter, 6" (150 mm) 92855 92910
92540 T-433 3-Blade Cutter 3" (75 mm) 92865 92895
92545 T-434 3-Blade Cutter 4" (110 mm) 92870 92895
92550 T-436 3-Blade Cutter 6" (150 mm) 92875 92895
DRAIN CLEANING
12.22
K-7500 Drum Machine
For 3" to 10" (75-250mm) Lines.
• Recommend 5/8" (16 mm) cable for 3" (75 mm) to 6" (150 mm) drain lines up to 250' (76 m).
• Recommend 3/4" (20 mm) cable for 4" (110 mm) to 10" (250 mm) drain lines up to 250' (76 m).
• The performance, cable control, durability, and maneuverability demanded by professional
users. Ideal for any tough job, such as roots – up to 250' (76 m).
• Cable spins at 200 RPM.
• Powerful, yet quiet, 600W universal motor and gearbox bear down as cutter engages
tough obstructions.
• Provides audible and visual signals to operator.
• Inner-drum and ball bearing distributor arm work with motor/gearbox system to reduce
chance of cable ip-over inside the drum.
• Main and inner drums won’t rust, split or dent – ever, and clean easily for professional
appearance. Main drum holds up to 100' (30.5 m) of 3/4" (20 mm) cable or 125' (38 m) of
5/8" (16 mm) cable.
• Powerful AUTOFEED®mechanism has grease ttings and an open design for easy
maintenance; advances and retrieves cable up to 22' (6.7 m) per minute.
• Two position stair climber eases transport and loading – eliminates extra cost for loading
wheels.
• Narrow prole allows machine to t through bathroom doors.
• Handles adjust to desired height to ensure balanced transport.
• Includes RIDGID®PVC drain cleaning gloves and operator’s manual.
• Approved by CSA to CSA and UL Standards (115 V only).
Standard Equipment
• 59360 – Tool Box.
• 69250 – 3/16" Hex Wrench.
• 70032 – RIDGID PVC Drain Cleaning Gloves.
• 92485 – P-Trap Cutter, 3" (75 mm).
• 92495 – Spade Cutter, 13/4" (45 mm).
• 92500 – Retrieving Auger 29/16" (65 mm).
• 92505 – Sawtooth Cutter, 3" (75 mm).
• 92510 – Double Cutter, 2" (50 mm).
• 92520 – Double Cutter, 3" (75 mm).
• 92560 – 3/4" (20 mm) x 2' (50 mm) Leader.
• 92830 – 4" Double Cutter (Blade Only).
• 92855 – 6" Double Cutter (Blade Only).
Machine Options
Catalog
No. Model No. Description
Voltage Weight
V lb. kg
59562 K-7500 Machine w/3/4" Pigtail and Standard Accessories 115 150 86.2
60052 K-7500 C-100 Machine, Standard Accessories, and 3/4" x 100'
Inner Core Cable. 115 272 123.7
60062 K-7500 w/C-75 Machine, Standard Accessories, and 3/4" x 75' Inner
Core Cable. 115 244 110.9
61102 K-7500 Machine w/5/8" Pigtail and Standard Accessories 115 149 67.8
61512 K-7500 w/C-24 Machine, Standard Accessories, and 5/8" (16 mm) x
100' (30,5 m) Inner Core Cable 220 233 106.0
61517 K-7500 w/C-100 Machine, Standard Accessories, and 3/4" (20 mm) x
100' (30,5 m) Inner Core Cable 220 272 123.7
61522 K-7500 Machine w/5/8" (16 mm) Pigtail and Standard
Accessories 220 149 67.8
61542 K-7500 Machine w/3/4" (20 mm) Pigtail and Standard
Accessories 220 150 86.2
Drum Machines
12.23
DRAIN CLEANING
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
41937 RIDGID Leather Drain Cleaning
Gloves 1/20.20
41992 A-75PF C-100IC Kit w/Tools, 3/4" (20
mm) x 100' (30,5 m) 8 3.50
49032 Front Guide Hose Assembly 31.30
59360 A-3 Tool Box 52.30
60032 A-75PF AUTOFEED Assembly 10 4.50
60037 A-75PF AUTOFEED Spacers 10 4.50
60042 A-7534D Drum Assembly w/3/4" (20 mm)
Pigtail 31 14.00
60047 A-75DR Drum Only 20 9.00
61107 A-7558D Drum Assembly w/5/8" (16 mm)
Pigtail 30 13.60
70032 -RIDGID PVC Drain Cleaning
Gloves 1/20.20
Accessories
Catalog
No.
Model
No. Description Weight
oz. g
31487 A-7570 5/8" (16 mm) Repair Splicer 11/243.00
34192 A-7571 3/4' (20 mm) Repair Splicer 257.00
92805 A-6582 5/8" (16 mm) Male Coupling 128.00
92810 A-6583 5/8" (16 mm) Female Coupling 257.00
92880 B-6840 3/4" (20 mm) Male Coupling 128.00
92885 B-6841 3/4" (20 mm) Female Coupling 257.00
Inner Core (IC) Cables
Catalog
No.
Model
No. Description Weight
lb. kg
5⁄8"-16 mm
92460 C-25 5/8" (16 mm) x 25' IC Cable
(7.6 m) 24 10.90
92465 C-26 5/8" (16 mm) x 50' IC Cable
(15.2 m) 43 19.50
92470 C-27 5/8" (16 mm) x 75' IC Cable
(22.9 m) 63 28.60
43647 C-24 5/8" (16 mm) x 100' IC Cable
(30.5 m) 84 38.10
3⁄4"-20 mm
92475 C-28 3/4" (20 mm) x 25' IC Cable
(7.6 m) 30 13.90
92480 C-29 3/4" (20 mm) x 50' IC Cable
(15.2 m) 60 27.20
41212 C-75 3/4" (20 mm) x 75' IC Cable
(22.9 m) 93 42.50
41697 C-100 3/4" (20 mm) x 100' IC Cable
(30.5 m) 122 55.30
Hollow Core Cables
Catalog
No.
Model
No. Description Weight
lb. kg
5⁄8"-
16 mm
32737 C-27HC 5/8" (16 mm) x 75' HC Cable
(23) 523/423.90
58192 C-24HC 5/8" (16 mm) x 100' HC Cable
(30.5m) 701/232.10
3⁄8"-
16 mm
47427 C-75HC 3/4" (20 mm) x 75' HC Cable
(23 m) 75 34.00
47432 C-100HC 3/4" (20 mm) x 100' HC Cable
(30.5 m) 100 45.50
Leaders and Pig Tails
Catalog
No.
Model
No. Description Weight
lb. kg
44117 3/4" (20 mm) Pigtail, 6' (1.8 m) Long 31/21.59
44122 5/8" (16 mm) Pigtail, 41/2' (1.4 m) Long 21/21.13
92555 T-458 5/8" (16 mm) x 2' (50 mm) Leader 20.85
92560 T-468 3/4" (20 mm) x 2' (50 mm) Leader 23/41.25
Tools and Replacement Blades – Fit 5/8” (16 mm) and 3/4” (20 mm) Cables
Catalog
No.
Model
No. Description Replac.
Blade(s)
51762 T-409 H-D Bulb Auger, 13/4" (45 mm) -
92485 T-403 P-Trap Cutter, 3" (75 mm) 92835
92490 T-404 P-Trap Cutter, 31/2" (87 mm) 92840
92495 T-406 Spade Cutter, 13/4" (45 mm) 92850
92500 T-407 Retrieving Auger 29⁄16" (65 mm) -
92505 T-408 Sawtooth Cutter, 3" (75 mm) 92890
92510 T-411 Double Cutter, 2" (50 mm) 92815
92515 T-412 Double Cutter, 21/2" (65 mm) 92820
92520 T-413 Double Cutter, 3" (75 mm) 92825
92525 T-414 Double Cutter, 4" (110 mm) 92830
92530 T-416 Double Cutter, 6" (150 mm) 92855
92535 T-432 3-Blade Cutter 2" (50 mm) 92860
92540 T-433 3-Blade Cutter 3" (75 mm) 92865
92545 T-434 3-Blade Cutter 4" (110 mm) 92870
92550 T-436 3-Blade Cutter 6" (150 mm) 92875
Cable Control & Performance –
When Tool Engages Tough Obstructions
1
2
3
Cable contracts
towards inner drum.
• Provides additional
strength.
• Further protection
against cable flip over
inside the drum.
Motor slows while power builds.
• Visual & audible signals indicate
torque increase.
• Reduced drum speed provides
greater control.
Cable engages compound
bend guide tube.
• Retards cable flip over
inside the drum.
Under high
torque.
Under normal
operating
conditions.
DRAIN CLEANING
12.24
K-750R Drum Machine
• For 3" to 6" (75-150mm) Drain Lines.
• The K-750R is a self-contained drain cleaner ideal for lateral drain lines from 3" to 6".
Easy-to-transport, narrow design for small entry ways and minimal setup make this
machine ideal for tough mainline work. Comes equipped with a large blade assortment to
handle numerous applications. Clears roots, debris and foreign objects out of main lines,
storm drains, house laterals and leach lines.
• Clear access to drum allows immediate view of cable for inspection plus easier and faster
cleaning of drum and cable.
• Patented Cable Control System slows the drum, should cable or blade become completely
lodged in blockage.
• New integral-wound, solid core cable is tough and kink resistant. (5/8" x 100').
• Main Lines, Storm Drains, Septic Lines, Building Drains.
Standard Equipment
• 37753 – 5/8" x 100' Heavy Duty Inner Core Cable.
• 59360 – Tool Box.
• 92485 – P-Trap Cutter, 3" (75 mm).
• 92495 – Spade Cutter, 13/4" (45 mm).
• 92510 – Double Cutter, 2" (50 mm).
• 92520 – Double Cutter, 3" (75 mm).
• 92525 – Double Cutter, 4" (110 mm).
Specifications
• Motor – 1/2 HP, 115V, 60Hz Reversible Induction Motor.
• 200 RPM.
• Air Activated Foot Switch.
• Weight – 194 lbs.
• Dual Kickstands.
• New Torque Limiter Feature.
• Lean, Well-Balanced Design for Easy One-Man Transport and Operation.
Catalog No. Model No. Description Weight
lb. kg
83557 K-75R 5/8" Open Cage Drum Machine w/5/8" x 100' IW Solid Core Cable;
2", 3", 4" “C" Cutters; P-Trap Cutter; Spade Blade; Tool Box; Gloves. 194 98
Drum Machines
Inner Core (IC) Cables
Catalog No. Model No. Description Weight
lb. kg
5⁄8"-16 mm
92460 C-25 5/8" (16 mm) x 25' IC Cable (7.6m) 24 10.9
92465 C-26 5/8" (16 mm) x 50' IC Cable (15.2m) 43 19.5
92470 C-27 5/8" (16 mm) x 75' IC Cable (22.9m) 63 28.6
43647 C-24 5/8" (16 mm) x 100' IC Cable (30.5m) 84 38.1
3⁄4"-20 mm
92475 C-28 3/4" (20 mm) x 25' IC Cable (7.6m) 30 13.9
92480 C-29 3/4" (20 mm) x 50' IC Cable (15,2m) 60 27.2
41212 C-75 3/4" (20 mm) x 75' IC Cable (22.9m) 93 42.5
41697 C-100 3/4" (20 mm) x 100' IC Cable (30.5m) 122 55.3
12.25
DRAIN CLEANING
Hollow Core Cables
Catalog No. Model No. Description Weight
lb. kg
5⁄8"-
16
mm
32737 C-27HC 5/8" (16 mm) x 75' HC Cable (23) 523/423.9
58192 C-24HC 5/8" (16 mm) x 100' HC Cable (30.5m) 701/232.1
3⁄8"-
16 mm
47427 C-75HC 3/4" (20 mm) x 75' HC Cable (23m) 75 34.0
47432 C-100HC 3/4" (20 mm) x 100' HC Cable (30.5m) 100 45.5
Tools and Replacement Blades – Fit 5/8" (16 mm) and 3/4" (20 mm) Cables
Catalog No. Model
No. Description Replac. Blade(s)
51762 T-409 H-D Bulb Auger, 13/4" (45 mm)
92485 T-403 P-Trap Cutter, 3" (75 mm) 92835
92490 T-404 P-Trap Cutter, 31/2" (87 mm) 92840
92495 T-406 Spade Cutter, 13/4" (45 mm) 92850
92500 T-407 Retrieving Auger 2 9⁄16" (65 mm) -
92505 T-408 Sawtooth Cutter, 3" (75 mm) 92890
92510 T-411 Double Cutter, 2" (50 mm) 92815
92515 T-412 Double Cutter, 21/2" (65 mm) 92820
92520 T-413 Double Cutter, 3" (75 mm) 92825
92525 T-414 Double Cutter, 4" (110 mm) 92830
92530 T-416 Double Cutter, 6" (150 mm) 92855
92540 T-433 3-Blade Cutter 3" (75 mm)
92545 T-434 3-Blade Cutter 4" (110 mm) 92870
92550 T-436 3-Blade Cutter 6" (150 mm)
Leaders and Pig Tails
Catalog No. Model
No. Description Weight
lb. kg
44117 3/4" (20 mm) Pigtail, 6' (1.8 m) Long 31/21.59
44122 5/8" (16 mm) Pigtail, 41/2' (1.4 m) Long 21/21.13
92555 T-458 5/8" (16 mm) x 2' (50 mm) Leader 20.85
92560 T-468 3/4" (20 mm) x 2' (50 mm) Leader 23/41.25
Accessories
Catalog No. Model No. Description Weight
lb. kg
41982 A-7534 Drum Assembly w/3/4" (20 mm) Pigtail 371/217.0
43637 A-7558 Drum Assembly w/5/8" (16 mm) Pigtail 33 15.0
43642 A-75 AUTOFEED Assembly 8 3.5
41937 RIDGID Leather Drain Cleaning Gloves 1/20.2
41992 A-75PF C-100IC Kit w/Tools, 3/4" (20 mm) x 100' (30,5 m) 8 3.5
49032 Front Guide Hose Assembly 31.3
59360 A-3 Tool Box 52.3
70032 RIDGID PVC Drain Cleaning Gloves 1/20.2
Repair Fittings
Catalog No. Model No. Description Weight
oz. g
31487 A-7570 5/8" (16 mm) Repair Splicer 11/243
31492 A-7571 3/4" (20 mm) Repair Splicer 257
92805 A-6582 5/8" (16 mm) Male Coupling 128
92810 A-6583 5/8" (16 mm) Female Coupling 257
92880 B-6840 3/4" (20 mm) Male Coupling 128
92885 B-6841 3/4" (20 mm) Female Coupling 257
DRAIN CLEANING
12.26
K-50 Sectional Machine
For 3/4" to 4" Drain Lines.
• Compact, versatile, professional’s machine. Capable of running three different size cables:
5/16" (8 mm), 3/8" (10 mm) and 5/8" (16 mm). The perfect, all-around sink, shower and oor
drain machine. Weighs less than 40 lbs (18 kg).
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle
down and cable spins at 400 RPM. Release handle, cable stops instantly.
• Uses sections of 5/8" (16 mm) cable, cleans 11/4" (32 mm) to 4" (110 mm) lines up to 100'
(30 m). C-8 best for 11/4" (32 mm) - 3" (75 mm) drains. C-9 best for 2" (50 mm) - 4" (110
mm) drains.
• Equipped with an A-17 adapter, runs up to 50' (15 m) of 5/16" (8 mm) or 35' (11 m) of 3/8" (10
mm) continuous length cable. 5/16" (8 mm) best for 3/4" (20 mm) to 11/2" (40 mm) lines. 3/8"
(10 mm) best for 11/4" (32 mm) to 2" (50 mm) lines.
• Equipped with 300W motor.
• Includes A-1 RIDGID®drain cleaning mitt and operator’s manual.
• Approved by CSA and CSA and UL Standards (115V only).
Machine Options
Catalog No. Model No. Description Weight
lb. kg
58920 K-50 Machine Only 115V 37 16.8
58960 K-50-4 115V Machine, with: A-30 Cable Kit 61 27.7
58980 K-50-6 115V Machine, with: -17-A Adapter, A-30 Cable Kit 67 30.4
59000 K-50-8 115V Machine, with: A-17-A Adapter, A-17-B Adapter, A-30
Cable Kit 77 34.9
52972 K-50-9 115V Machine, with: A-40 Cable Kit 74 33.6
76455 K-50 Machine Only 230V 37 16.8
76475 K-50-4 230V Machine, with: A-30 Cable Kit 61 27.7
76485 K-50-6 230V Machine, with: -17-A Adapter, A-30 Cable Kit 67 30.4
76495 K-50-8 230V Machine, with: A-17-A Adapter, A-17-B Adapter, A-30
Cable Kit 77 34.9
Sectional Machines
A-30 Cable Kit Includes:
– Six Sections C-8, 71⁄2'x5⁄8" Cable (45 feet).
– A-10 Cable Carrier.
– T-201 Straight Auger.
– T-202 Bulb Auger.
– T-205 “C” Cutter.
– T-211 Spade Cutter.
– A-13 Coupling Pin Key.
– A-14-6 Rear Guide Hose.
– A-1 Left-Hand RIDGID Drain Cleaning Mitt.
Model K-50-8 shown below includes:
• K-50 Machine.
• A-17-A, Adapter includes: 25' x 5⁄16", C-1 Bulb Auger Cable.
• A-17-B, Adapter includes: 35' x 3⁄8", C-5 Bulb Auger Cable.
• A-1 RIDGID Drain Cleaning Mitt.
12.27
DRAIN CLEANING
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
59235 A-14-6 6' (1.8 m) Rear Guide Hose 52.3
84325 A-14-10 10' (3 m) Rear Guide Hose 7 3.2
59270 A-18 Front Guide Hose Assembly 9 4.1
59210 A-10 Cable Carrier Holds 90' (27 m)
C-8, C-9 31/41.5
59205 A-1 Left-Hand RIDGID Drain Clean-
ing Mitt 1/20.2
59295 A-2 Right-Hand RIDGID Drain
Cleaning Mitt 1/20.2
59230 A-13 Pin Key For 3/8" (10 mm) Cable 1/20.2
59450 A-3179 K-50 Jaw Set 11/20.7
Tools
Catalog
No.
Model
No. Description Replac.
Blade(s)
62990 T-201 Straight Auger, 5" (125 mm)
Long -
62067 T-201A Straight Flex Auger -
62995 T-202 Bulb Auger, 11/8" (29 mm)
O.D. -
63000 T-203 Bulb Auger 7/8" (22 mm) O.D. -
54837 T-204 “C" Cutter 1" (25 mm) 54832
63005 T-205 “C" Cutter, 13/8" (35 mm) 97835
52812 T-230 H-D “C" Cutter, 2" (50 mm) 92815
52817 T-231 H-D “C" Cutter, 21/2" (65 mm) 92820
52822 T-232 H-D “C" Cutter, 3" (80 mm) 92835
63010 T-206 Funnel Auger, 3" (80 mm)
Long -
63015 T-207 Spiral Cutter, 11/4" (32 mm) 97840
63020 T-208 Spiral Cutter, 11/2" (40 mm) 97895
63025 T-209 Spiral Cutter, 2" (50 mm) 97900
63030 T-210 Spade Cutter, 1" (25 mm) 97905
63035 T-211 Spade Cutter, 13/8" (35 mm) 97825
63040 T-212 Spade Cutter, 13/4" (45 mm) 92850
63045 T-213 4-Blade Cutter, 1" (25 mm) 97795
63050 T-214 4-Blade Cutter, 13/8" (35 mm) 97910
63060 T-216 Chain Knocker, 2" (50 mm) 98000
63280 T-218 Flue Brush, 3" (75 mm) -
63070 T-219 Flue Brush, 2 1/2" (65 mm) -
63080 T-220 Flue Brush, 2" (50 mm) -
63220 T-221 Flue Brush, 11/2" (40 mm) -
-55457 T-225 Retrieving Auger -
-12128 T-240
Tool Set (3/8"- K-380): T-202
Bulb Auger, T-211 Spade
Cutter, A-13 Pin Key
-
-48482 T-250 Tool Set includes: T-203,
T-205, T-210, T-217, A-13
Cable Kits
Catalog
No.
Model
No. Cable Tools & Accessories Weight
lb. kg
59365 A-30 Six Sections:
C-8, 5⁄8"x71⁄2'
(45', 13.7m)
T-201 Straight Auger
T-202 Bulb Auger
T-205 “C” Cutter
T-211 Spade Cutter
A-13 Coupling Pin Key
A-10 Cable Carrier
A-14-6 Rear Guide Hose
A-1 Left-Hand RIDGID
Drain Cleaning Mitt
20 9.1
59370 A-30TW Six
Sections:C-7,
5⁄8"x71⁄2" (45',
13.7m) Tight-
Wind
Same as A-30 30 13.6
52962 A-40 Six Sections:
C-9, 5⁄8" x 10'
(60', 18.3 m)
T-206 Funnel Auger
T-215 4-Blade Cutter
T-231 “C” Cutter
A-13 Coupling Pin Key
A-10 Cable Carrier
A-14-10 Rear Guide Hose
A-1 Left-Hand RIDGID
Drain Cleaning Mitt
37 16.8
Adapters
Cables
Catalog
No.
Model
No. Description lb. kg
5⁄8"- 16 mm
Sectional
62265 C-7 71⁄2' (2.3 m) Tight-Wind 4 1.8
62270 C-8 71⁄2' (2.3 m) All-Purpose Wind 3 1.4
25046 C-8PC 71⁄2’ (2.3 m) All-Purpose Wind w/
Plastic Core 31⁄21.6
51317 C-9 10' (3.1m) Heavy-Duty Wind 43⁄42.1
3⁄8"- 10 mm
62245
62250
62260
96037
C-4
C-5
C-6
C-6IC
25' (7.6 m) w/Male Coupling
35' (10.7 m) w/Bulb Auger
35' (10.7 m) w/Male Coupling
35' (10.7 m) w/Male Coupling
41⁄2
81⁄4
81⁄4
81⁄2
2.0
3.8
3.8
4.0
5⁄16"- 8mm
Bulb Auger
62225
56782
89400
C-1
C-1IC
C-21
25' (7.6 m) w/Bulb Auger
25' (7.6 m) Inner Core
w/ Bulb Auger
50' (15.2m) w/Bulb Auger
31⁄2
4
7
1.6
1.8
3.2
Drop Head
62235
56787
89405
C-2
C-2IC
C-22
25' (7.6 m) w/Drop Head Auger
25' (7.6 m) Inner Core
w/Drop Head Auger
50' (15.2m) w/Drop Head Auger
31⁄2
4
7
1.6
1.8
3.2
Catalog
No.
Model
No. Description Weight
lb. kg
59250 A-17-A Adapter With 25' x 5⁄16" Cable w/Bulb Auger 8 3.6
59255 A-17-B Adapter With 35' x 3⁄8" Cable w/Bulb Auger 13 5.9
59265 A-17-C Adapter With 35' x 3⁄8" Cable w/Male
Coupling 13 5.9
92095 A-17-D Adapter With 50' x 5⁄16" Cable w/Bulb Auger 12 5.4
92100 A-17-E Adapter With 50' x 5/16" Cable w/Drop Head 12 5.4
DRAIN CLEANING
12.28
K-60SP Sectional Machine
For 11/4" to 4" (32-100 mm) Drain Lines.
• A compact machine for institutional, commercial or residential cleaning. Also ideal for
septic tank vacuum truck operators. Small enough to t into cramped spaces, yet powerful
enough to clear tough blockages.
• Ideal for rooftop vent stacks. Rear handle allows for easy transporting up ladders and onto
rooftops.
• Remove only two bolts to access jaw set for cleaning or replacement. Removal of same
bolts provides access to belt drive.
• Equipped with 1/2HP motor.
• CSA approved.
• Approved to UL standards (NRTLC).
Catalog
No. Model No. Description Voltage Weight
V lb. kg
66492 K-60SP Machine with A-1 Operator’s Mitt, A-12 Pin Key, and
A-60-12 Rear Guide Hose 115 41 18.6
66497 K-60SP-SE
Machine with A-1 Operator’s Mitt, A-12 Pin Key, and
A-60-12 Rear, Guide Hose, plus: A-61 Tool Kit and A-62
Cable Kit
115 92 41.7
66512 K-60SP Machine with A-1 Operator’s Mitt, A-12 Pin Key, and
A-60-12 Rear Guide Hose 220 41 18.6
66517 K-60SP-SE
Machine with A-1 Operator’s Mitt, A-12 Pin Key, and
A-60-12 Rear, Guide Hose, plus: A-61 Tool Kit and A-62
Cable Kit
220 92 41.7
Sectional Machines
K-60SP-SE shown below includes:
• K-60SP Machine.
• A-1 RIDGID Drain Cleaning Mitt.
• A-60-12 Rear Guide Hose.
• A-62 Cable Kit, includes:
– A-8 Cable Carrier.
– Five Sections Of C-10,
7⁄8" Cable, Total 75 Feet.
• A-61 Tool Kit, includes:
– T-101 Straight Auger.
– T-102 Funnel Auger.
– T-107 Spade Cutter.
– T-125 Retrieving Auger.
– T-150-1 Sharktooth Cutter.
– A-3 Tool Box.
– A-12 Pin Key.
12.29
DRAIN CLEANING
Cables and Leaders
Catalog
No.
Model
No. Description Weight
lb. kg
7⁄8"-22 mm
62275 C-10 15' (4.6 m) All- Purpose Wind 91/24.30
25036 C-10 IC 15' Cable with Inner Core (4.6 m) 10 4.50
30007 T-127 7/8" (22 mm) Trap Leader 20.90
5⁄8"-16 mm
51317 C-9 5/8" x 10' (3.1 m) Heavy- Duty
Wind 52.20
62270 C-8 5/8"x7
1/2' (2.3 m) All- Purpose
Wind 31.40
25046 C-11IC 71/2' Cable with Inner Core (2.3 m) 31/21.60
62265 C-7 5/8"x7
1/2' (2.3 m) Tight- Wind 41.80
Cable Kits and Tool Kit
Catalog
No.
Model
No. Description Weight
lb. kg
61630 A-62
Standard Equipment Cable Kit for K-
60-SE, includes: – Five Sections C-10,
7/8" (22 mm) x 15' (4.6 m) Cable – A-8
Cable Carrier
43 19.50
61625 A-61
Standard Equipment Tool Kit for
K-60-SE, includes: –T-101 Straight
Auger –T-102 Funnel Auger –T-107
Spade Cutter –T-125 Retrirving Auger
–T-150-1 Sharktooth Cutter –A-3 Tool
Box –A-12 Pin Key
8 3.60
59365 A-30 Six Sections: C-8, 5/8"x71/2' (45',
13.7 m) 20 9.10
48472 A-35
5/8" Cable Kit, includes: Six Sections
C-8, 5/8"x7
1/2" Cable (45', 14 m),
A-10 Cable Carrier, T-201 Straight
Auger, T-202 Bulb Auger, T-205 “C"
Cutter, T-211 Spade Cutter, A-13
Coupling Pin Key
18 8.20
-94492 A-25
5/8" (16 mm) Cable Kit, includes: Five
Sections C-8, 5/8" (16 mm) x 71/2" (2.3
m) Cable 37.5' (11.5 m) –A-10 Cable
Carrier –T-201 Straight Auger –T-202
Bulb Auger –T-205 “C" Cutter –A-13
Coupling Pin Key
18 8.20
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
59360 A-3 Tool Box 52.30
59205 A-1 Left-Hand RIDGID Drain Cleaning Mitt 1/20.20
59295 A-2 Right-Hand RIDGID Drain Cleaning Mitt 1/20.20
59230 A-13 Pin Key For 3/8" (10 mm) Cable 1/20.20
59225 A-12 Pin Key For 1/2" (12 mm) Cable 1/20.20
61615 A-60-12 12' (3.7 m) Rear Guide Hose For K-60 12 5.50
76575 A-60-16 16' (4.9 m) Rear Guide Hose For K-60 151/27.00
59425 A-36 Cable Caddy 15 6.80
59470 A-8 Cable Carrier (Holds 75' (23 m) 7/8" (22
mm) Cable/C-10) 51/22.50
59210 A-10 Cable Carrier Holds 90' (27 m) C-8, C-9 31/41.50
59445 A-5 Grease Gun 1/20.20
65687 -K-60SP Replacement Jawset 3/40.30
Tools- Fits7/8" Sectional Cables
Catalog
No.
Model
No. Description
Replac.
Blade(s)
62850 T-101 Straight Auger -
62855 T-102 Funnel Auger -
27642 T-125 Retrieving Auger -
62860 T-103 Sawtooth Cutter, 21/2" (65 mm) 98070
62865 T-104 "H" Cutter, 21/2" (65 mm) 97800
62870 T-105 Grease Cutter, 21/2" (65 mm) 97920
62875 T-106 Grease Cutter, 31/2" (87 mm) 97925
62915 T-109 Spiral Sawtooth Cutter, 11/2" (45 mm) 97930
62920 T-110 Spiral Sawtooth Cutter, 21/4" (57 mm) 97935
62925 T-111 Spiral Sawtooth Cutter, 3" (75 mm) 92890
62930 T-112 4-Blade Cutter, 13/4" (45 mm) 97915
62935 T-113 4-Blade Cutter, 3" (75 mm) 97910
62940 T-114 Chain Knocker for 4" lines 97985
98050 T-150 Sharktooth Cutter 3" (75 mm) and 4"
(110 mm) -
98055 T-150-1 Sharktooth Cutter 3" (75 mm) Blade
98005- 3"
(75mm)/
98010- 3"
(100mm)
98060 T-150-2 Sharktooth Cutter 4" (110 mm) Blade 98010
62880 T-107 Spade Cutter, 13/4" (45 mm) 92850
54842 T-141 Knife Blade Cutter 11/2" (40 mm) 54847
54852 T-142 Knife Blade Cutter 21/2" (65 mm) 97800
For C-4, C-6, C-7, C-8, C-9, C-10, C-11, C-12, C-14, C-15, C-31, C-32, C-33, C-44, C-45, and C-46.
TO COUPLE TO UNCOUPLE
FAST, SIMPLE METHOD TO CONNECT TOOLS
DRAIN CLEANING
12.30
Sectional Machines K-1500 Sectional Machine
For 2" to 8" (50-200mm) Drain and Sewer Lines.
• The nest all-around sewer and drain cleaning machine. One man can easily clean the
heaviest blockages – indoors or out. High-speed cleaning gets the job done faster...better.
• Wheels to the job site – sets up fast, cleans up fast.
• Low-prole “B" frame design will t most crawl spaces, loads and unloads from truck
easily. Upright “A" frame features cable carrier storage during transport, ideal for in-house
applications.
• Equipped to run, easy to handle, 15-foot sections of 11/4" cable to clean 3" to 8" (32 m-200
mm) lines to 200 feet (61m).
• Easy clutch jaw change-out adapts K-1500 to run 15-foot sections of 7/8" (4.6/22 mm)
cable through 2" to 4" lines up to 175 feet (50-100 mm, 53 m).
• Equipped with 3/4HP motor; 115V Models.
• CSA approved.
• Approved to UL standards (NRTLC).
Machine Options - A Frame
Catalog
No.
Model
No. Description Voltage Weight
V lb. kg
23692 K-1500A Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose 115 135 61.3
23702 K-1500A
Machine with A-1 Mitt, A-12 Pin Key,and A-34-12 Rear
Guide Hose, Plus: Seven Sections 11/4" (C-14) Cable, Total
105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set*
115 256 116.1
23712 K-1500A
Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear
Guide Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total
105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set*
115 256 116.1
27592 K-1500A
Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear
Guide Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total
105 Feet, Two A-8 Cable Carriers, Nine-Piece 11/4" Tool Set*
220 256 116.1
27612 K-1500A Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose 220 135 61.3
*"A-369-X 11/4" Jaw Set
Machine Options -B Frame
Catalog
No.
Model
No. Description Voltage Weight
V lb. kg
23697 K-1500B Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide
Hose 115 135 61.3
23707 K-1500B
Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide
Hose, Plus: Seven Sections 11/4" (C-14) Cable Total 105 Feet, Two
A-8 Cable Carriers, Nine-Piece 11/4" Tool Set
115 256 116.1
23717 K-1500B
Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide
Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total 105 Feet, Two
A-8 Cable Carriers, Nine-Piece 11/4" Tool Set
115 256 116.1
27597 K-1500B
Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide
Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total 105 Feet, Two
A-8 Cable Carriers, Nine-Piece 11/4" Tool Set
220 256 116.1
27617 K-1500B Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide
Hose 220 135 61.3
27637 K-1500B
Machine with A-1 Mitt, A-12 Pin Key, and A-34-12 Rear Guide
Hose, Plus: Seven Sections 11/4" (C-11) Cable, Total 105 Feet, Two
A-8 Cable Carriers, Nine-Piece 11/4" Tool Set
220 256 116.1
33922 -K-1500B Special Kit 220 210 95.0
Model K-1500B
(B- Frame)
Model K-1500A
(A-Frame)
Model K-1500 B W/C-11 shown above includes:
• K-1500 B Machine with A-1 RIDGID Drain Cleaning Mitt,
A-12 Pin Key and A-34-12 Rear Guide Hose.
• Seven Sections of 11⁄4" (C-11) Cable, Total 105 Feet.
• Two A-8 Cable Carriers.
• Nine-Piece Tool Set includes:
– T-1 Straight Auger. – T-50-1 Sharktooth Cutter.
– T-3 Funnel Auger. – A-2864 Hex Key.
– T-6 Retrieving Auger. – T-8 Grease Cutter.
– A-3516 Hex Key. – A-3 Tool Box.
– T-13 Sawtooth Cutter.
12.31
DRAIN CLEANING
Cables and Leaders
Catalog
No.
Model
No. Description Weight
lb. kg
11⁄4"-32 mm
62280 C-11
15' (4,6 m) Standard All-
Purpose Wind. 3/8" (10 mm)
Pitch. Good for 4" (110 mm)
Traps, 3" (75 mm) - 8" (200
mm) Lines
16 7.30
24226 C-11 PC
15' Standard All- Purpose Wind
3/8" Pitch w/ Plastic Core, Good
For 4" Traps
17 3/5 8.00
62285 C-12
15' (4,6 m) Extra-Heavy- Duty
Wind. 3/8" (10 mm) Pitch.
Recommended For 4" (110 mm)
- 10" (250 mm) Long Runs, No
4" (110 mm) Traps
19 8.60
62295 C-14
15' (4,6) Extra-Flexible Wind.
1/2" (13 mm) Pitch. Recom-
mended For 3" (75 mm) - 10"
(250 mm) Lines Through Clea-
nout, No 4" (110 mm) Traps
16 6.80
62300 C-15
15' (4,6) Extra-Flexible Wind.
1/2" (13 mm) Pitch. Recom-
mended For 3" (75 mm) - 6"
(150 mm) Lines Good for Traps
12 5.50
63090 T-27 11/4" (32 mm) x 25" (63,5 cm)
Leader 23/41.20
7⁄8"-22 mm
62275 C-10 15' (4,6 m) All- Purpose Wind 91/24.30
25036 C-10 PC 15' Cable with Inner Core
(4,6 m) 10 4.50
Cable Kits
Catalog
No.
Model
No. Description Weight
lb. kg
61630 A-61
Standard Equipment Tool Kit for K-
60-SE, includes: –T-101 Straight Auger
–T-102 Funnel Auger –T-107 Spade
Cutter –T-125 Retrirving Auger –T-150-1
Sharktooth Cutter –A-3 Tool Box –A-12
Pin Key
8 3.60
61625 A-62
Standard Equipment Cable Kit for
K-60-SE, includes: – Five Sections C-10,
7/8" (22 mm) x 15' (4,6 m) Cable – A-8
Cable Carrier
43 19.50
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
59205 A-1 Left-Hand RIDGID Drain Cleaning Mitt 1/20.20
59295 A-2 Right-Hand RIDGID Drain Cleaning Mitt 1/20.20
59225 A-12 Pin Key For 1/2" (12 mm) Cable 1/20.20
59240 A-17 Manhole Guide Pipe 23 10.40
59300 A-20 8-Foot (2,4 m) Front Guide Hose Assembly 25 11.40
59320 A-369X 1 1/4" (32 mm) Replacement Jawset 3/40.30
59325 A-368X 7/8" Jaw Set 3/40.30
59360 A-3 Tool Box 52.30
59395 A-34-12 12-Foot (3,7 m) Rear Guide Hose 20 9.10
59400 A-34-16 16-Foot (4,9 m) Rear Guide Hose 261/212.00
59415 A-34-10 10-Foot (3,1 m) Rear Guide Hose 133/86.20
-59440 A-4 Trap Spoon (30", 76 cm) 13/40.80
59470 A-8 Cable Carrier (Holds 75' (23 m) 7/8" (22 mm)
Cable/C-10) 51/22.50
59475 A-9 Cable Carrier 150-Foot (45,7) Capacity
11/4" (32 mm) 14 6.40
62467 A-1HD Heavy-Duty Left-Hand RIDGID Drain
Cleaning Mitt 1/20.20
62472 A-2HD Heavy-Duty Right-Hand RIDGID Drain
Cleaning Mitt 1/20.20
Tools
Catalog
No.
Model
No. Description Replac.
Blade(s)
59480 T-11 “H" Cutter, 2 1/2" (65 mm) 97800
59485 T-12 “H" Cutter, 3 1/2" (89 mm) 97945
61770 T-15A Expanding Cutter, 4" - 6" (110-150
mm) 62970
61790 T-4 Heavy-Duty Funnel Auger -
61800 T-2 Heavy-Duty Straight Auger -
61825 T-15B Expanding Cutter, 6" - 8" (150-200
mm) 62980
61970 T-13 Sawtooth Cutter, 2 1/2" (65 mm) 98070
61975 T-14 Sawtooth Cutter, 3 1/2" (89 mm) 98075
62840 T-1 Straight Auger -
62845 T-10 Grease Cutter, 4 1/2" (114 mm) 97865
63105 T-3 Funnel Auger -
63190 T-5 Straight Retrieving Auger -
63195 T-6 Funnel Retrieving Auger Run
Machine In Reverse -
63200 T-7 Hook Auger -
63205 T-8 Grease Cutter, 2 1/2" (65 mm) 97920
63210 T-9 Grease Cutter, 3 1/2" (89 mm) 97925
59625 T-21 Spiral Sawtooth Cutter, 2 1/2"-
59765 T-24 4-Blade Cutter, 21/2" (65 mm) 97940
59770 T-25 4-Blade Cutter, 3 1/2" (89 mm) 97975
59775 T-26 4-Blade Cutter, 4 1/2" (114 mm) 97805
59780 T-26A 4-Blade Cutter, 5 1/2" (140 mm) 97980
61850 T-17 Spiral Bar Cutter, 6" (150 mm) 97955
61855 T-18 Spiral Bar Cutter, 8" (200 mm) 97960
61960 T-16 Spiral Bar Cutter, 4" (110 mm) 97855
63075 T-22 Spiral Sawtooth Cutter, 3" -
63085 T-23 Spiral Sawtooth Cutter, 4" (110 mm) 97850
63110 T-31 Chain Knocker, For 3"- 4" Pipe
(75-110 mm) 97985
63115 T-32 Chain Knocker, For 6" Pipe (150 mm) 97990
63120 T-33 Chain Knocker, For 8" Pipe (200 mm) 97995
63145 T-38 Flue Brush, 1 1/2" (40 mm) -
63150 T-39 Flue Brush, 2" (50 mm) -
63155 T-40 Flue Brush, 2 1/2" (65 mm) -
63160 T-41 Flue Brush, 3" (76 mm) -
63165 T-42 Flue Brush, 3 1/2" (89 mm) -
63170 T-43 Flue Brush, 4" (110 mm) -
63175 T-44 Flue Brush, 4 1/2" (114 mm) -
63180 T-46 Flue Brush, 5 1/2" (140 mm) -
63185 T-47 Flue Brush, 6" -
63240 T-45 Flue Brush, 5" (127 mm) -
98030 T-50 Three Blade 3-4-5" (75-110-127 mm) -
98035 T-50-1 Sharktooth Cutter, 3" (75 mm) 98005
98040 T-50-2 Sharktooth Cutter, 4" (110 mm) 98010
98045 T-50-3 Sharktooth Cutter, 5" (127 mm) 98015
DRAIN CLEANING
12.32
K-1500SP Sectional Machine
• The nest all-around sewer and drain cleaning machine. One man can easily clean the
heaviest blockages – indoors or out. High-speed cleaning gets the job done faster..better.
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control: Pull handle
down and cable spins at 600 RPM Release handle, cable stops instantly.
• Wheels to the job site – sets up fast, cleans up fast.
• Equipped to run, easy to handle, 15-foot (4,6 m) sections of 11/4" (32 mm) cable to clean 3"
(75 mm) to 10" (250 mm) lines to 300' (91 m).
• Easy clutch jaw change-out adapts K-1500 to run 15-foot (4,6 m) sections of 7/8" (22 mm)
cable through 2" (50 mm) to 4" (110 mm) lines up to 175' (53 m).
• Equipped with full 1500W motor and heavy-duty rotary switch.
• 10" solid ball bearing wheels.
• Low prole frame design will t most crawl spaces.
• Includes A-1 RIDGID drain cleaning mitt and operators manual.
• Approved by CSA to CSA and UL Standards (115V only).
Machine Options -B Frame
Catalog
No. Model No. Description Voltage Weight
lb. kg
43507 K-1500SP 120V-60Hz Machine with A-1 Operator’s Mitt and A-12 Pin
Key, Plus: A-34-12 Rear Guide Hose 115 141 64
46907 K-1500SP
120V-60Hz Machine with A-1 Operator’s Mitt and A-12 Pin
Key, Plus: A-34-12 Rear Guide Hose, A-34-12 Rear Guide
Hose, 150 Feet, Ten Sections of C-11, 11/4" Cable, Three A-8
Cable Carriers, A-3 Tool Box, Eight-Piece 11/4" Tool Package
115 317 144
91027 K-1500SPB
120V-60Hz Machine with A-1 RIDGID Drain Cleaning Mitt and
A-12 Pin Key Plus : - A-34-12 Rear Guide Hose - C-14 Three
Carrier Cable Combination Kit
115 297 135
43512 K-1500SP 220/240V-50Hz Machine with A-1 Operator’s Mitt and A-12
Pin Key, Plus: A-34-12 Rear Guide Hose 115 141 64
Machine Options - A Frame
Catalog
No. Model No. Description Voltage Weight
lb. kg
46837 K-1500SPA 120V Machine with A-1 Operator’s Mitt and A-12 Pin Key,
Plus: A-34-12 Rear Guide Hose 115 150 68
46902 K-1500SPA
120V Machine with A-1 Operator’s Mitt and A-12 Pin
Key, Plus: A-34-12 Rear Guide Hose, A-34-12 Rear Guide
Hose, 150 Feet, Ten Sections of C-11, 11/4" Cable, Three
A-8 Cable Carriers, A-3 Tool Box, Eight-Piece 11/4" Tool
Package
115 326 148
91032 K-1500SPA
120V Machine with A-1 Operator’s Mitt and A-12 Pin
Key, Plus: A-34-12 Rear Guide Hose & C-14 Three Carrier
Cable Combination Kit
115 317 144
45302 K-1500A Only Machine with A-1 RIDIGD Drain Cleaning Mitt, A-12 Pin
Key, and A 34-12 Rear Guide Hose 115 132 60
45307 K-1500A SE
Machine with A-1 RIDIGD Drain Cleaning Mitt, A-12 Pin
Key, and A-34-12 Rear Guide Hose, Plus SE Tool Kit (see
below).
115 254 115
Sectional Machines
Model K-1500SP B-Frame
Model K-1500SP with C-11 shown above
K-1500SP w/C-11 includes:
• K-1500SP Machine with A-1 RIDGID Drain Cleaning Mitt and
A-12 Pin Key.
• A-34-12 Rear Guide Hose.
• 150 Feet, Ten Sections of C-11, 11⁄4" Cable.
• Three A-8 Cable Carriers.
• Nine-Piece 11⁄4" Tool Package, includes:
– T-1 Straight Auger.
– T-3 Funnel Auger.– T-6 Retrieving Auger.
– T-8 21⁄2" Grease Cutter.
– T-13 21⁄2" Sawtooth Cutter.
– T-50 Sharktooth Cutter with 3", 4" and 5" Blades.
– A-2864 Hex Key (3⁄16").
– A-3 Tool Box.
– A-3516 Hex Key (1⁄4").
12.33
DRAIN CLEANING
Cables and Leaders
Catalog
No.
Model
No. Description Weight
lb. kg
24226 C-11 15' Standard All- Purpose Wind 3/8" Pitch w/
Plastic Core, Good For 4" Traps 173/58.0
25036 C-10 IC 15' Cable with Inner Core (4,6 m) 10 4.5
62275 C-10 15' (4,6 m) All- Purpose Wind 91/24.3
62280 C-11
15' (4,6 m) Standard All-Purpose Wind. 3/8" (10
mm) Pitch. Good for 4" (110 mm) Traps, 3" (75
mm) - 8" (200 mm) Lines
16 7.3
62285 C-12
15' (4,6 m) Extra-Heavy- Duty Wind. 3/8" (10 mm)
Pitch. Recommended For 4" (110 mm) - 10" (250
mm) Long Runs, No 4" (110 mm) Traps
19 8.6
62295 C-14
15' (4,6) Extra-Flexible Wind. 1/2" (13 mm) Pitch.
Recommended For 3" (75 mm) - 10" (250 mm)
Lines Through Cleanout, No 4" (110 mm) Traps
16 6.8
62300 C-15
15' (4,6) Extra-Flexible Wind. 1/2" (13 mm) Pitch.
Recommended For 3" (75 mm) - 6" (150 mm)
Lines Good for Traps
12 5.5
-63090 T-27 1 1/4" (32 mm) x 25" (63,5 cm) Leader 23/41.2
Cable Kits and Tool Kit
Catalog
No.
Model
No. Description Weight
lb. kg
61625 A-61
Standard Equipment Tool Kit for K-60-SE,
includes: –T-101 Straight Auger –T-102 Funnel
Auger –T-107 Spade Cutter –T-125 Retrirving
Auger –T-150-1 Sharktooth Cutter –A-3 Tool
Box –A-12 Pin Key
8 3.60
61630 A-62
Standard Equipment Cable Kit for K-60-SE,
includes: – Five Sections C-10, 7/8" (22 mm) x
15' (4,6 m) Cable – A-8 Cable Carrier
43 19.50
C-14 Heavy-Duty Accessory Kit
Catalog
No.
Model
No. Description Weight
lb. kg
-48457 -
C-14 Three-Carrier Cable Combination Kit
Includes: 150' C-14 Cable, Ten Sections 1 1/4",
Three Cable Carriers, A-3 Toolbox and A-12
Pin Key, T-2 HD Straight Auger; T-4 HD Funnel
Auger; T-6 Funnel Retrieving Auger; T-8 Spade
Cutter; T-13 Saw Tooth Cutters; T-50 Sharktooth
160 72.60
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
59470 A-8 Cable Carrier (Holds 75' (23 m) 7/8" (22 mm)
Cable/C-10) 51/22.5
59475 A-9 Cable Carrier 150-Foot (45,7) Capacity 11/4"
(32 mm) 14 6.4
59415 A-34-10 10-Foot (3,1 m) Rear Guide Hose 133/86.2
59395 A-34-12 12-Foot (3,7 m) Rear Guide Hose 20 9.1
59400 A-34-16 16-Foot (4,9 m) Rear Guide Hose 261/212.0
-59300 A-20 8-Foot (2,4 m) Front Guide Hose Assembly 25 11.4
59205 A-1 Left-Hand RIDGID Drain Cleaning Mitt 1/20.2
59295 A-2 Right-Hand RIDGID Drain Cleaning Mitt 1/20.2
62467 A-1HD Heavy-Duty Left-Hand RIDGID Drain Cleaning
Mitt 1/20.2
62472 A-2HD Heavy-Duty Right-Hand RIDGID Drain Clean-
ing Mitt 1/20.2
59360 A-3 Tool Box 52.3
59225 A-12 Pin Key For 1/2" (12 mm) Cable 1/20.2
-59440 A-4 Trap Spoon (30", 76 cm) 13/40.8
-59240 A-17 Manhole Guide Pipe 23 10.4
-59320 A-369X 1 1/4" (32 mm) Replacement Jawset 3/40.3
-59325 A-368X 7/8" Jaw Set 3/40.3
Tools
Catalog
No.
Model
No. Description Replac.
Blade(s)
59480 T-11 “H" Cutter, 21/2" (65 mm) 97800
59485 T-12 “H" Cutter, 31/2" (89 mm) 97945
59625 T-21 Spiral Sawtooth Cutter, 2 1/2"-
59765 T-24 4-Blade Cutter, 21/2" (65 mm) 97940
59770 T-25 4-Blade Cutter, 31/2" (89 mm) 97975
59775 T-26 4-Blade Cutter, 41/2" (114 mm) 97805
59780 T-26A 4-Blade Cutter, 51/2" (140 mm) 97980
-61770 T-15A Expanding Cutter, 4" - 6" (110-150 mm) 62970
61790 T-4 Heavy-Duty Funnel Auger -
61800 T-2 Heavy-Duty Straight Auger -
-61825 T-15B Expanding Cutter, 6" - 8" (150-200 mm) 62980
61850 T-17 Spiral Bar Cutter, 6" (150 mm) 97955
61855 T-18 Spiral Bar Cutter, 8" (200 mm) 97960
61960 T-16 Spiral Bar Cutter, 4" (110 mm) 97855
61970 T-13 Sawtooth Cutter, 21/2" (65 mm) 98070
62840 T-1 Straight Auger -
62845 T-10 Grease Cutter, 41/2" (114 mm) 97865
63075 T-22 Spiral Sawtooth Cutter, 3" -
63085 T-23 Spiral Sawtooth Cutter, 4" (110 mm) 97850
63105 T-3 Funnel Auger -
63110 T-31 Chain Knocker, For 3"- 4" Pipe (75-110 mm) 97985
63115 T-32 Chain Knocker, For 6" Pipe (150 mm) 97990
63120 T-33 Chain Knocker, For 8" Pipe (200 mm) 97995
63145 T-38 Flue Brush, 11/2" (40 mm) -
63150 T-39 Flue Brush, 2" (50 mm) -
63155 T-40 Flue Brush, 21/2" (65 mm) -
63160 T-41 Flue Brush, 3" (76 mm) -
63165 T-42 Flue Brush, 31/2" (89 mm) -
63170 T-43 Flue Brush, 4" (110 mm) -
63175 T-44 Flue Brush, 41/2" (114 mm) -
63180 T-46 Flue Brush, 51/2" (140 mm) -
63185 T-47 Flue Brush, 6" -
-63190 T-5 Straight Retrieving Auger -
-63195 T-6 Funnel Retrieving Auger Run Machine In
Reverse -
-63200 T-7 Hook Auger -
63205 T-8 Grease Cutter, 21/2" (65 mm) 97920
63210 T-9 Grease Cutter, 31/2" (89 mm) 97925
63240 T-45 Flue Brush, 5" (127 mm) -
98030 T-50 Three Blade 3-4-5" (75-110-127 mm) -
98035 T-50-1 Sharktooth Cutter, 3" (75 mm) 98005
98040 T-50-2 Sharktooth Cutter, 4" (110 mm) 98010
98045 T-50-3 Sharktooth Cutter, 5" (127 mm) 98015
DRAIN CLEANING
12.34
K-1500G Sectional Machine
For 2" to 10" (50-250 mm) Drain/Sewer Lines.
• A gasoline engine makes the Model K-1500G well-suited for cleaning lines in remote
locations where electrical power is unavailable. Cuts through roots fast.
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control. Pull down on
the handle and the cable spins at 600 RPM. Release handle, cable stops instantly.
• Comes equipped to use 11/4" (32 mm) cable to clean 3" (75 mm) to 10" (250 mm) lines
through 300 feet (92 m).
• 6 HP gasoline engine drives cable via four-speed transmission. Allows the operator to vary
the cable spinning speed to t the application. Forward speeds of 333, 425 and 500 RPM,
and a reverse speed of 250 RPM.
• Low-prole, four-wheel cart easily rolls to the job. Guards against machine upset and
possible fuel spillage.
• Includes A-1 RIDGID®drain cleaning mitt and operator’s manual.
Specifications
• Machine Dimensions.
• Width Wheel to Wheel – 26".
• Length Including Kickstand – 28".
• Ground to Top of Handle – 38".
• Back of Handle to Front – 49".
• Ground to Top of Housing Shell – 27".
Catalog
No. Model No. Description Weight
lb. kg
44587 K-1500G
Machine Only with A-1 RIDGID Drain Cleaning Mitt, A-12
Coupling Pin Key and A-34-10 Rear Guide Hose, A-369-X 1¼"
(32 mm) Jaw Set
190 86.4
48462 K-1500G w/C-14
Machine with Standard Equipment, includes: – Ten Sections
Of C-14 Cable, Total 150 Feet (45,7 m) – Three A-8 Cable
Carriers – A-1 Left-Hand RIDGID Drain Cleaning Mitt – A-12
Coupling Pin Key – A-34-12 Rear Guide Hose – A-2864 Hex
Key – A-3516 Hex Key – A-3 Tool Box – T-2 Heavy-Duty
Straight Auger – T-4 Heavy-Duty Funnel Auger – T-6 Retriev-
ing Auger – T-8 Grease Cutter – T-13 Sawtooth Cutter – T-50
Sharktooth Cutter
350 159.0
Sectional Machines
Model K-1500G
A-17 Manhole Guide Pipe
Adjusts 7' to 12', supports cables,
locks into place quickly.
Model K-1500G with C-14 shown above
12.35
DRAIN CLEANING
Cables and Leaders
Catalog
No.
Model
No. Description Weight
lb. kg
25036 C-10 IC 15' Cable with Inner Core (4.6 m) 10 4.50
25046 C-11IC 71/2' Cable with Inner Core (2.3 m) 31/21.60
62275 C-10 15' (4.6 m) All- Purpose Wind 91/24.30
62280 C-11
15' (4.6 m) Standard All-Purpose Wind.
3/8" (10 mm) Pitch. Good for 4" (110
mm) Traps, 3" (75 mm) - 8" (200 mm)
Lines
16 7.30
62285 C-12
15' (4,6 m) Extra-Heavy- Duty Wind. 3/8"
(10 mm) Pitch. Recommended For 4"
(110 mm) - 10" (250 mm) Long Runs, No
4" (110 mm) Traps
19 8.60
62295 C-14
15' (4,6) Extra-Flexible Wind. 1/2" (13
mm) Pitch. Recommended For 3" (75
mm) - 10" (250 mm) Lines Through
Cleanout, No 4" (110 mm) Traps
16 6.80
62300 C-15
15' (4.6) Extra-Flexible Wind. 1/2" (13
mm) Pitch. Recommended For 3" (75
mm) - 6" (150 mm) Lines Good for Traps
12 5.50
63090 T-27 11/4" (32 mm) x 25" (63.5 cm) Leader 23/41.20
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
59205 A-1 Left-Hand RIDGID Drain Cleaning Mitt 1/20.20
59225 A-12 Pin Key For 1/2" (12 mm) Cable 1/20.20
59240 A-17 Manhole Guide Pipe 23 10.40
59295 A-2 Right-Hand RIDGID Drain Cleaning Mitt 1/20.20
59300 A-20 8-Foot (2.4 m) Front Guide Hose
Assembly 25 11.40
59320 A-369X 11/4" (32 mm) Replacement Jawset 3/40.30
59360 A-3 Tool Box 52.30
59395 A-34-12 12-Foot (3.7 m) Rear Guide Hose 20 9.10
59415 A-34-10 10-Foot (3.1 m) Rear Guide Hose 133/86.20
59440 A-4 Trap Spoon (30"/ 76 cm) 13/40.80
59470 A-8 Cable Carrier (Holds 75' (23 m) 7/8" (22
mm) Cable/C-10) 51/22.50
59475 A-9 Cable Carrier 150-Foot (45.7 m) Capac-
ity 11/4" (32 mm) 14 6.40
59400 A-34-16 16-Foot (4.9 m) Rear Guide Hose 261/212.00
Tools
Catalog
No.
Model
No. Description
Replac.
Blade(s)
59480 T-11 “H" Cutter, 21/2" (65 mm) 97800
59485 T-12 “H" Cutter, 31/2" (89 mm) 97945
59625 T-21 Spiral Sawtooth Cutter, 21/2"-
59765 T-24 4-Blade Cutter, 21/2" (65 mm) 97940
59770 T-25 4-Blade Cutter, 31/2" (89 mm) 97975
59775 T-26 4-Blade Cutter, 41/2" (114 mm) 97805
59780 T-26A 4-Blade Cutter, 51/2" (140 mm) 97980
-61770 T-15A Expanding Cutter, 4" - 6" (110-150
mm) 62970
61790 T-4 Heavy-Duty Funnel Auger -
61800 T-2 Heavy-Duty Straight Auger -
61825 T-15B Expanding Cutter, 6" - 8" (150-200
mm) 62980
61850 T-17 Spiral Bar Cutter, 6" (150 mm) 97955
61855 T-18 Spiral Bar Cutter, 8" (200 mm) 97960
61960 T-16 Spiral Bar Cutter, 4" (110 mm) 97855
61970 T-13 Sawtooth Cutter, 21/2" (65 mm) 98070
61975 T-14 Sawtooth Cutter, 31/2" (89 mm) 98075
62840 T-1 Straight Auger -
62845 T-10 Grease Cutter, 41/2" (114 mm) 97865
63075 T-22 Spiral Sawtooth Cutter, 3" -
63085 T-23 Spiral Sawtooth Cutter, 4" (110 mm) 97850
63105 T-3 Funnel Auger -
63110 T-31 Chain Knocker, For 3"- 4" Pipe
(75-110 mm) 97985
63115 T-32 Chain Knocker, For 6" Pipe (150 mm) 97990
63120 T-33 Chain Knocker, For 8" Pipe (200 mm) 97995
63145 T-38 Flue Brush, 11/2" (40 mm) -
63150 T-39 Flue Brush, 2" (50 mm) -
63155 T-40 Flue Brush, 21/2" (65 mm) -
63160 T-41 Flue Brush, 3" (76 mm) -
63165 T-42 Flue Brush, 31/2" (89 mm) -
63170 T-43 Flue Brush, 4" (110 mm) -
63175 T-44 Flue Brush, 41/2" (114 mm) -
63180 T-46 Flue Brush, 51/2" (140 mm) -
-63190 T-5 Straight Retrieving Auger -
-63195 T-6 Funnel Retrieving Auger Run
Machine In Reverse -
-63200 T-7 Hook Auger -
63205 T-8 Grease Cutter, 21/2" (65 mm) 97920
63210 T-9 Grease Cutter, 31/2" (89 mm) 97925
63240 T-45 Flue Brush, 5" (127 mm) -
98030 T-50 Three Blade 3-4-5" (75-110-127 mm) -
98035 T-50-1 Sharktooth Cutter, 3" (75 mm) 98005
98040 T-50-2 Sharktooth Cutter, 4" (110 mm) 98010
98045 T-50-3 Sharktooth Cutter, 5" (127 mm) 98015
DRAIN CLEANING
12.36
K-1000 Rodder Machine
Cleans 8" to 24" (200-610mm) Drain/Sewer Lines.
• A rugged, compact machine well-suited for straight main line work in municipalities,
universities, institutions and industry. Drives sectional sewer rods through long, straight
runs of larger diameter pipe – up to 500 feet (150 m).
• Equipped witha6HPgasoline engine and forward/reverse transmission. Rod rotates at
133 RPM in forward and reverse at full throttle.
• Spring-loaded throttle control is hand operated. Varies rod speed within range. Returns
engine speed to idle and disengages clutch when operator releases throttle.
• Adjustable torque limiter minimizes kinking of rods and excessive torque through
transmission system.
• Large 10" (250 mm) wheels on frame for optimal transport.
• Includes A-1 RIDGID drain cleaning mitt and operator's manual.
Catalog
No. Model No. Description Weight
lb. kg
59175 K-1000
Rodder Machine, includes: – B-3542 Rod Driver – A-2704 Tool Driver
– A-3567 Drive Pin – R-0 Rod Turner – A-4558 Torque Adapter – A-12
Coupling Pin Key – A-1 Left-Hand RIDGID Drain Cleaning Mitt – A-2
Right-Hand RIDGID Drain Cleaning Mitt
160 75
84295 K-1000
Rodder Machine, same as above, plus: – 20 Sections of A-2475, 5/16"
(8 mm) Rod, Total of 100 Feet (30 m) – T-300 Spear Head Cutter –
T-317 Auger – T-326 Pick-Up Tool
210 95
Rodder Machines
Model K-1000
12.37
DRAIN CLEANING
Rods
Catalog
No.
Model
No. Description Weight
lb. kg
60355 A-2474 3' (0.9 m) Solid Sectional Rod, Includes:
R-1 Male and R-2 Female Couplings 11/40.6
60360 A-2475 5' (1.5 m) Solid Sectional Rod, Includes:
R-1 Male and R-2 Female Couplings 13/40.8
60365 A-2476
10' (3.0 m) Solid Sectional Rod,
Includes: R-1 Male and R-2 Female
Couplings
3 1.4
Accessories
Catalog
No.
Model
No. Description Weight
lb. kg
59835 K-10 Complete Set of Quick- Connect Rod
Couplings: One Each R-1 and R-2 3/80.20
59560 R-1 Male Rod Coupling 1/40.10
59555 R-2 Female Rod Coupling 1/80.10
61875 R-7 Male Tool Coupling, connects Tool
Adapter to Rodding Tool 1/20.20
61885 R-8 Female Tool Coupling, connects Tool to
Tool Adapter 1/20.20
60700 A-2704 Tool Adapter, includes R-2 and R-7
Couplings 21/41.00
62170 B-3542 Rod Holder For K-1000 33/81.50
62815 R-0 Rod Turner, used to manually turn Rods
in short runs 31/41.50
59205 A-1 Left-Hand RIDGID Drain Cleaning Mitt 1/20.20
59295 A-2 Right-Hand RIDGID Drain Cleaning Mitt 1/20.20
59360 A-3 Tool Box 5 2.30
59225 A-12 Pin Key For 1/2" (12 mm) Cable 1/20.20
Rods, Rodding Tools, and Accessories
• RIDGID K-10 quick-connect couplings make rodding jobs easier than
ordinary threaded couplings:
– To connect rods, align and snap them together for a solid connection
(Fig. 1 and 2).
– To disconnect, insert the pin key and slide the couplings apart (Fig. 3).
• One coupling pin key replaces assembly tool and wrench required to
connect ordinary threaded couplings. Easy-to-add rods or tools.
No bulky reels.
• Convert existing tools and rods to the RIDGID quick-connect system:
– One pair of R1 and R2 couplings substitute for one threaded coupling.
– Standard left-hand and-right hand rod nuts fasten R1 and R2 couplings
to existing rods.
– R-8 couplings adapt each rod tool to quick-connect system.
– A-2704 adapts rod couplings to larger-size tool couplings.
Fig. 1 Fig. 2
K-10
R-1 R-2 R-7 R-8
Fig. 3
Tools
Catalog
No.
Model
No. Description Weight
lb. kg
62045 T-300 Spear Head 17/80.80
62050 T-301 Round Stock Corkscrew, 11/2" (40 mm) 11/40.60
62055 T-302 Round Stock Corkscrew, 2" (50 mm) 11/20.70
62060 T-303 Round Stock Corkscrew, 21/2" (65 mm) 13/40.80
62065 T-304 Round Stock Corkscrew, 3" (75 mm) 13/40.80
62075 T-306 Double Corkscrew, 3" (75 mm) 21/41.00
62080 T-307 Double Corkscrew, 4" (110 mm) 21/21.10
62090 T-309 Square Stock Corkscrew, 3" (75 mm) 21/41.00
62095 T-310 Square Stock Corkscrew, 4" (110 mm) 21/21.10
62100 T-311 Square Stock Corkscrew, 5" (125 mm) 31/41.50
62105 T-312 Square Stock Corkscrew, 6" (150 mm) 33/41.70
62370 T-313 Square Stock Corkscrew, 8" (200 mm) 61/23.00
62375 T-314 Square Stock Corkscrew, 10" (250
mm) 71/23.40
62110 T-316 Auger, 3" (75 mm) 3 1.40
62115 T-317 Auger, 4" (110 mm) 31/21.50
62120 T-318 Auger, 5" (125 mm) 41/22.00
62125 T-319 Auger, 6" (150 mm) 5 2.30
62385 T-320 Auger, 8" (200 mm) 81/23.90
62390 T-321 Auger, 10" (250 mm) 91/24.30
62140 T-326 Pick-Up Tool 1 0.50
The following Heavy-Duty Cable Tools are also recommended for use with rod.
Catalog
No.
Model
No. Description Replac.
Blade(s)
61800 T-2 Heavy-Duty Straight Auger -
61790 T-4 Heavy-Duty Funnel Auger -
63200 T-7 Hook Auger -
61960 T-16 Spiral Bar Cutter, 4" (110 mm) 97855
61850 T-17 Spiral Bar Cutter, 6" (150 mm) 97955
61855 T-18 Spiral Bar Cutter, 8" (200 mm) 97960
63085 T-23 Spiral Sawtooth Cutter, 4" (110 mm) 97850
59765 T-24 4-Blade Cutter, 21/2" (65 mm) 97940
59770 T-25 4-Blade Cutter, 31/2" (89 mm) 97975
59775 T-26 4-Blade Cutter, 41/2" (114 mm) 97805
59780 T-26A 4-Blade Cutter, 51/2" (140 mm) 97980
DRAIN CLEANING
12.38
Water Jetting Machines
KJ-1350 Water Jetter
11/4" to 4" (32-100mm) Drain Lines.
• This jetter propels a highly exible hose through 11/4" to 4" lines–blasting through sludge,
soap and grease blockages. As you pull the hose back, it power scrubs the line, ushing
debris away and restoring drain lines to their free-owing capacity.
• Powerful: Actual working pressure of 1350 psi and ow of 1.4 GPM for fast, effective
cleaning of lines.
• Pulse Action: Activate the Model KJ-1350's plus action to easily negotiate difcult bends
and traps. The Model KJ-1350-2 has a second level of pulse.
• Portable and Compact: The optional H-10 Cart rolls the jetter and hose to the job site.
Jetter and hose reel are easily removed from the cart in seconds for hard to reach drains
or remote storage. The compact cart offers a retractable handle and swivel hose reel
minimizing storage space. Optional adapter allows the KJ-1350 to be mounted on the
upright H-30 Cart.
• Electrical Requirement: The 1.5 HP motor draws a maximum of 14 Amps and can run on
most standard 115 Volt circuits.
• Easy to use: Thrust propels the hose down the line. You simply guide the hose into the
drain.
• High Quality: Duplex pump with corrosion-resistant, forged brass head. New pressure
control valve allows quick and easy pressure adjustment.
• Dependable: Reduced number of ttings, hoses and parts minimizes leaks and down time
keeping you on the job.
• Versatile: Optional power washer package cleans cables, tools and other heavily soiled
equipment.
• CSA approved.
• Approved to UL standards (NRTLC).
Machine Options
Catalog
No.
Model
No. Description Weight
lb. kg
62587 KJ-1350
KJ-1350 Standard Jetter with Pulse: H-21, H-22, and H-24 1/8" NPT
Nozzles, 25' x 1/8" Sink Trap Hose, Nylon Storage Bag, Nozzle Cleaning
Tool
70 31.7
62597 KJ-1350-C Above With: H-10 Cart, 100' x 1/4" Trap Hose 120 54.4
63107 KJ-1350-2 KJ-1350 Jetter with Dual Pulse: H-21, H-22, and H-24 1/8" NPT Nozzles,
50' x 1/8" Sink Trap Hose, Nylon Storage Bag, Nozzle Cleaning Tool 72 32.7
63112 KJ-1350-2C Above With: H-10 Cart, 100' x 1/4" Trap Hose 122 55.3
Model KJ-1350-C on Model H-10 Cart
Jetter Nozzles
Catalog
No.
Model
No. Description
Female NPT
Thread
in.
64707 H-21 KJ-1350 Propolsion Nozzle 1/8
64712 H-22 KJ-1350 Penetrating Nozzle 1/8
64717 H-24 KJ-1350 Drop Head Nozzle 1/8
64722 H-31 KJ-1350 Propulsion Nozzle 1/4
82832 H-25 KJ-1350 Spinning Nozzle 1/8
64727 H-32 KJ-1350 Penetrating Nozzle 1/4
Trap Leaders
Catalog
No.
Model
No. Description
Female NPT
Thread
Male NPT
Thread
in. in.
50002 HL-1 Flexible Leader, 3⁄16"1/81/8
50007 HL-2 Flexible Leader, 1/4"1/81/8
Jetter Hoses
Catalog
No.
Model
No. Description
Male NPT
Thread Hose I.D. Hose O.D.
in. in. in.
47597 H-1435 3⁄16" x 35' (11 m) 1/83/16 1/4
47602 H-1450 3⁄16" x 50' (15 m) 1/83/16 1/4
47607 H-1250 1/4" x 50' (15 m) 1/41/41/2
49272 H-1475 3⁄16" x 75' (23 m) 1/83/16 1/4
49277 H-1400 3⁄16" x 100' (30 m) 1/83/16 1/4
49487 H-1215 1/4" x 150' (46 m) 1/41/41/2
51587 H-1211 1/4" x 100' (33 m) 1/41/41/2
51597 H-1220 1/4" x 200' (61 m) 1/41/41/2
52957 H-1825 1/8"x 25' Sink Trap Hose 1/81/83/16
53037 H-1850 1/8x 50' Sink Trap 1/81/83/16
64732 H-1415 3⁄16" x 150' (45.5 m) 1/83/16 1/4
Catalog
No
Model
No. Description
41937 - RIDGID Leather Drain Cleaning Gloves
47542 H-21 Nozzle Cleaning Tool
48367 H-25 Winterizing Kit
51572 H-1235 Wash Wand Hose 1/2". x 35''
62592 H-10 WH H-10 Cart with Hose Reel and 100' x 3/16" Trap Hose
62757 - Nylon Storage Bag
62882 H-5 Mini Hose Reel
62887 HP-EL Pressure Wash Package, Electric Jetters
62892 H-30A KJ-1350 Adapter to Fit H-30 Cart
64697 H-10 H-10 Cart with Hose Reel
64702 HW-EL Pressure Wash (Gun only)
64737 H-30 H-30 Cart with Hose Reel
67187 H-32 Jet Vac
70032 - RIDGID PVC Drain Cleaning Gloves
Accessories
12.39
DRAIN CLEANING
Water Jetting Machines
KJ-1750 Water Jetter
11/4" to 4" (32-100mm) Drain Lines.
• This jetter propels a highly exible hose through 11/4" to 4" lines–blasting through sludge,
soap and grease blockages. As you pull the hose back, it power scrubs the line, ushing
debris away and restoring drain lines to their free-owing capacity.
• Powerful: Actual working pressure of 1750 psi and ow of 1.4 GPM for fast, effective
cleaning of lines.
• Pulse Action: Two levels of pulse are standard. Activate the KJ-1750’s pulse action to
easily negotiate difcult bends and traps.
• Portable: The optional H-30 Cart rolls the jetter and hose to the job site. The jetter is
easily removed from the cart in seconds for hard to reach drain or for remote storage.
Optional adapter allows the KJ-1750 to be mounted on the compact H-10 Cart.
• Electrical Requirement: The 2.0 HP motor draws a maximum of 17 Amps which requires a
20 Amp, 115 Volt circuit.
• Easy to use: Thrust propels the hose down the line. You simply guide the hose into the
drain.
• High Quality: Duplex pump with corrosion-resistant, forged brass head. New pressure
control valve allows quick and easy pressure adjustment.
• Dependable: Reduced number of ttings, hoses and parts minimizes leaks and down time
keeping you on the job.
• Versatile: Optional power washer package cleans cables, tools and other heavily soiled
equipment.
• CSA approved.
• Approved to UL standards (NRTLC).
Machine Options
Catalog
No. Model No. Description Weight
lb. kg
62687 KJ-1750
KJ-1750 Jetter with Dual Pulse: H-41, H-42, and H-44 1/8" NPT
Nozzles, H-51 and H-52 1/4" NPT Nozzles, 50' x 1/8" Sink Trap
Hose, Nylon Storage Bag, Nozzle Cleaning Tool
75 34.0
62697 KJ-1750-C Above With: H-30 Cart, 110' x 1/2" Jet Hose 155 70.3
67332 67332 62687 with: H-10 Cart, 100' x 1/4" Trap Hose 125 56.7
Model KJ-1750-C on Model H-30 Cart
Jetter Nozzles
Catalog
No. Model No. Description
Female NPT
Thread
in.
64742 H-41 KJ-1750 Porpulsion Nozzle 1/8
64747 H-42 KJ-1750 Penetrating Nozzle 1/8
64752 H-44 KJ-1750 Drop Head Nozzle 1/8
64757 H-51 KJ-1750 Propulsion Nozzle 1/4
64762 H-52 KJ-1750 Penetrating Nozzle 1/4
82837 H-45 KJ-1750 Spinning Nozzle 1/8
Jetter Hoses
Catalog
No.
Model
No. Description
Male NPT
Thread Hose I.D. Hose
O.D.
in.
in. mm in. mm
47597 H-1435 3⁄16" x 35' (11 m)1/8-3/16 -1/4
47602 H-1450 3⁄16" x 50' (15 m) 1/8-3/16 -1/4
47607 H-1250 1/4" x 50' (15 m) 1/4-1/4-1/2
49272 H-1475 3⁄16" x 75' (23 m) 1/8-3/16 -1/4
49277 H-1400 3⁄16" x 100' (30 m) 1/8-3/16 -1/4
49487 H-1215 1/4" x 150' (46 m) 1/4-1/4-1/2
51587 H-1211 1/4" x 100' (33 m) 1/4-1/4-1/2
51597 H-1220 1/4" x 200' (61 m) 1/4-1/4-1/2
52957 H-1825 1/8"x 25' Sink Trap Hose 1/8-1/8-3/16
53037 H-1850 1/8x 50' Sink Trap 1/8-1/8-3/16
64732 H-1415 3⁄16" x 150' (45,5 m) 1/8-3/16 -1/4
Accessories
Catalog
No.
Model
No. Description
47542 H-21 Nozzle Cleaning Tool
48367 H-25 Winterizing Kit
51572 H-1235 Wash Wand Hose 1/2". x 35''
62592 H-10 WH H-10 Cart with Hose Reel and 100' x 3/16"
Trap Hose
62877 H-30 WH H-30 Cart with Hose Reel and 110' (33 m) x
1/4" Jet Hose
62882 H-5 Mini Hose Reel
62887 HP-EL Pressure Wash Package, Electric Jetters
62897 H-1235 KJ-1750 Adapter to Fit H-10 Cart
64697 H-10 H-10 Cart with Hose Reel
64702 HW-EL Pressure Wash (Gun only)
64737 H-30 H-30 Cart with Hose Reel
67187 H-32 Jet Vac
70032 -RIDGID PVC Drain Cleaning Gloves
41937 -RIDGID Leather Drain Cleaning Gloves
62757 -Nylon Storage Bag
DRAIN CLEANING
12.40
KJ-2200 Water Jetter
This jetter propels a highly exible hose through 11/4" (32 mm) to 6" (150 mm) lines blasting
through sludge, soap and grease blockages. As you pull the hose back, it power scrubs the
line ushing debris away, restoring drain lines to their full, free-owing capacity.
• Powerful – Actual working pressure of 2200 psi and ow of 2.4 GPM for fast, effective
cleaning of lines.
• Easy to Use – Thrust propels the hose down the line. You simply guide the hose into the
drain.
• Pulse Action – Activate the KJ-2200’s pulse action to easily negotiate difcult bends and
traps.
• Portable – The optional H-30 cart rolls the jetter and hose to the job site. The jetter is
easily removed from the cart in seconds for hard to reach drains, indoor applications or
remote storage.
• Convenient – Standard equipment includes FV-1 foot valve. It makes remote or indoor
operation simple and safe. You control the jetting action at the drain while leaving the
jetter outdoors.
• Quality & Dependability – Triplex pump with corrosion-resistant, forged brass head.
Reduced number of ttings, hoses and parts minimizes leaks and down time – keeping
you on the job.
• Versatile – Optional power washer package cleans cables, tools and other heavily soiled
equipment.
• New and improved 6.5 HP Recoil start gasoline engine starts easily. Features: ON/OFF
switch; choke and throttle controls; easy access oil ll and dip stick.
Machine Options
Catalog
No. Model No. Description Weight
lb. kg
63877 KJ-2200
KJ-2200 Jetter with Pulse – H-61, H-62, and H-64 1/8" NPT
Nozzles – H-71 and H-72 1/4" NPT Nozzles – 75' x 3⁄16" Trap
Hose – FV-1 Foot Valve – Nozzle Cleaning Tool – H-1235
Wash Wand Hose 1/2" x 35' (10,7 m)
65 29.5
63882 KJ-2200-C Above With: – H-30 Cart – 110' (33 m) x 1/4" Jet Hose 145 65.8
Water Jetting Machines
Jetter Nozzles
Catalog
No. Model No. Description Female NPT
Thread (in.)
64772 H-61 Propulsion Nozzle 1/8
64777 H-62 Penetrating Nozzle 1/8
64782 H-64 Drop Head Nozzle 1/8
82842 H-65 Spinning Nozzle 1/8
64787 H-71 Propulsion Nozzle 1/4
64792 H-72 Penetrating Nozzle 1/4
82852 H-75 Spinning Nozzle 1/4
12.41
DRAIN CLEANING
Jetter Hoses
Catalog
No. Model No. Description Hose I.D. Hose O.D.
in. in.
47597 H-1435 3⁄16" x 35' (11 m) 3/16 1/4
47602 H-1450 3⁄16" x 50' (15 m) 3/16 1/4
49272 H-1475 3⁄16" x 75' (23 m) 3/16 1/4
49277 H-1400 3⁄⁄16" x 100' (30 m) 3/16 1/4
47607 H-1250 1/4" x 50' (15 m) 1/41/2
47612 H-1275 4" x 70' (23 m) 1/41/2
51587 H-1211 1/4" x 100' (33 m) 1/41/2
49487 H-1215 1/4" x 150' (46 m) 1/41/2
51597 H-1220 1/4" x 200' (61 m) 1/41/2
64732 H-1415 3⁄16" x 150' (45,5 m) 3/16 1/4
Accessories
Catalog
No. Model No. Description Weight
lb. kg
62882 H-5 Mini Hose Reel --
64737 H-30 H-30 Cart with Hose Reel --
62877 H-30 WH H-30 Cart with Hose Reel and 110' (33 m) x 1/4" Jet Hose --
64077 HP-22 Pressure Wash Package, KJ-2200 --
64767 HW-22 Wash Wand, KJ-2200 --
48157 FV-1 Foot Valve --
66732 HF-4 Quick Connect Hose (Reel to Foot Valve) --
48367 H-25 Winterizing Kit --
47542 H-21 Nozzle Cleaning Tool --
67187 H-32 Jet Vac --
70032 -RIDGID PVC Drain Cleaning Gloves 1/20.20
41937 -RIDGID Leather Drain Cleaning Gloves 1/20.20
Trap Leaders
Catalog
No. Model No. Description Male NPT
Thread (in.)
Female NPT
Thread (in.)
50002 HL-1 Flexible Leader, 3⁄16"1/83/16
50007 HL-2 Flexible Leader, 1/4"1/83/16
DRAIN CLEANING
12.42
Water Jetting Machines
KJ-3100 Water Jetter
The RIDGID®Model KJ-3100 portable water jetter gives you 3000 psi (205bar) actual
working pressure to handle large commercial and industrial applications. This jetter propels
a highly exible and lightweight hose through 2" (50 mm) to 10" (250 mm) lines blasting
through sludge, soap, grease, and sediment blockages. As you pull the hose back, it power
scrubs the line ushing debris away and restoring drain lines to their full, free-owing
capacity – all without the use of harmful chemicals.
• Powerful – Actual working pressure of 3000 psi (205bar) and ow of 5.5 GPM (21 l/min)
for fast, effective cleaning of lines.
• Lightweight Hose – Hose with nylon braid provides signicant weight reduction and
increased exibility – all without reducing strength. Allows the thrust to propel the hose
further down the line.
• Complete – With the Model KJ-3100’s removable hose reel, there is no need to purchase
expensive portable hose reels. Standard packages come equipped to handle indoor and
remote applications.
• Convenient – Completely remove the hose reel to ease loading onto service trucks. Simply
rotate the hose reel forward to gain full access to the engine’s gas tank and air lter.
• Maneuverable – In the heavy-duty 3000 psi (205bar) jetter category, the RIDGID KJ-3100
is one of the most maneuverable jetters on the market. The unit, on its unique two-
wheeled cart, easily ts through standard size doors and can negotiate tight turns with
the greatest of ease.
• Pulse Action – Activate the Model KJ-3100’s pulse action to easily negotiate difcult
bends and traps.
• Quality & Dependability – Triplex pump with corrosion-resistant, forged brass head. Gear
reducer allows pump to run at slower (optimal) speed. Reduced number of ttings, hoses
and parts minimizes leaks and downtime – keeping you on the job.
• Versatile – Power wash package and chemical injector system cleans cables, tools, and
other heavily soiled equipment.
• Quick Start – 16 HP Recoil start gasoline engine starts easily. Features: ON/OFF switch;
fuel shutoff; choke and throttle controls; easy access oil ll and dip stick.
Machine Options
Catalog
No. Model No. Description Weight
lb. kg
37413 KJ-3100
KJ-3100 Jetter with Pulse – H-111 and H-112 1/4" NPT Nozzles –
H-38 Hose Reel with 200' (61 m) x 3/8" ID Jet Hose – 50' (15 m) x
3/8" ID Jet/Wash Hose – FV-1 Foot Valve – Nozzle Cleaning Tool
– HW-30 Wash Wand – Root Ranger Root Cutting Nozzle – HF-4
Quick Connect Hose
272 125
Jetter Nozzles
Catalog
No. Model No. Description Female NPT Thread
in.
38698 H-101 Propulsion Nozzle 1/8
38713 H-102 Penetrating Nozzle 1/8
38703 H-104 Drop Head Nozzle 1/8
38723 H-105 Spinning Nozzle 1/8
38693 H-111 Propulsion Nozzle 1/4
38708 H-112 Penetrating Nozzle 1/4
38718 H-115 Spinning Nozzle 1/4
16713 RR3000 Root Ranger Root Cutting Nozzle 1/4
12.43
DRAIN CLEANING
Jetter Hoses
Catalog
No. Model No. Description Hose I.D. Hose O.D. Male NPT
Thread
in. in. in.
47597 H-1435 3⁄16" x 35' (11 m) 3/16 1/41/8
47602 H-1450 3⁄16" x 50' (15 m) 3/16 1/41/8
49272 H-1475 3⁄16" x 75' (23 m) 3/16 1/41/8
49277 H-1400 3⁄16" x 100' (30 m) 3/16 1/41/8
64732 H-1415 3⁄16" x 150' (45.5 m) 3/16 1/41/8
64832 H-3850 3/8" ID x 50' (15 m) Jet/Wash Hose 3/85/81/4
64837 H-3810 3/8" ID x 100' (30 m) Jet Hose 3/85/81/4
64842 H-3815 3/8" ID x 150' (45.5 m) Jet Hose 3/85/81/4
64847 H-3820 3/8" ID x 200' (61 m) Jet Hose 3/85/81/4
64857 H-3830 3/8" ID x 300' (91 m) Jet Hose 3/85/81/4
Accessories
Catalog
No. Model No. Description
62882 H-5 Mini Hose Reel
64862 H-38 Hose Reel (Fits KJ-3000)
64902 H-38 WH Hose Reel with 200' (61 m) x 3/8" ID Hose (Fits KJ-3100)
64797 HW-30 Wash Wand, KJ-3000
48367 H-25 Winterizing Kit
48157 FV-1 Foot Valve
66732 HF-4 Quick Connect Hose (Reel to Foot Valve)
47542 H-21 Nozzle Cleaning Tool
67187 H-32 Jet Vac
70032 -RIDGID PVC Drain Cleaning Gloves
41937 -RIDGID Leather Drain Cleaning Gloves
Trap Leaders
Catalog
No. Model No. Description Male NPT Thread Female Thread
in. in.
50002 HL-1 Flexible Leader, 3⁄16"1/81/8
50007 HL-2 Flexible Leader, 1/4"1/81/4
DRAIN CLEANING
12.44
XD PRO Submersible Sump Pumps
Rugged cast iron construction features a 1/2" solid-handling capacity and an 8’ power cord
that operates an automatic vertical switch to prevent perimeter drainage system overow.
• Energy efcient, oil-lled 1/3and 1/2HP motors.
• Top suction intake lters debris, preventing airlocks for increased reliability.
•1/2" solid-handling capacity, thermally protected sump pump.
• 360° stainless steel oat guard, for superior switch protection from debris.
•11/2" discharge for easy installation and compliance to building codes.
• 11" footprint allows installations into tight sump pits.
• Stainless steel ttings and impeller plates for corrosion resistance.
• Two-pole snap-action mechanical oat switch.
• Carbon/ceramic shaft seal for maximum life.
• Upper and lower ball bearings for quiet performance and long life.
• 3-year limited warranty.
Catalog
No. Model No. Description
47348 RS33 1/3HP Sump Pump 60 GPM@5ft.
47343 RS50 1/2HP Sump Pump 70 GPM@5ft.
47338 RS75 3/4HP Sump Pump 80 GPM@5ft.
Sump Pumps
RS50AT Submersible Sump Pump System
• Energy efcient, oil-lled 1/2HP motor.
• Top suction intake lters debris, preventing airlocks for increased reliability.
•1/2" solid-handling capacity, thermally protected sump pump.
• 360° stainless steel oat guard, for superior switch protection from debris.
•11/2" discharge for easy installation and compliance to building codes.
• 11" footprint allows installations into tight sump pits.
• Stainless steel ttings and impeller plates for corrosion resistance.
• Two-pole snap-action mechanical oat switch.
• Carbon/ceramic shaft seal for maximum life.
• Upper and lower ball bearings for quiet performance and long life.
• 3-year limited warranty.
AdvanTEXT™ Features.
• Text messages triggered by electrical outage and high water condition.
• Two-way communication: Text the unit for status updates from anywhere; Texts up to
three numbers.
Catalog
No. Model No. Description
47333 RS50AT RS50 – 1/2HP Sump Pump System
RSA2AT – AdvanTEXT™ Cellular Monitoring
12.45
DRAIN CLEANING
500RSS System
Preassembled primary and backup sump pump system with Advance Notication Battery
Backup.
• Energy efcient, oil-lled 1/2HP motor.
• Top suction intake lters debris, preventing airlocks for increased reliability.
•1/2" solid-handling capacity, thermally protected sump pump.
• 360° stainless steel oat guard, for superior switch protection from debris.
•11/2" discharge for easy installation and compliance to building codes.
• 11" footprint allows installations into tight sump pits.
• Stainless steel ttings and impeller plates for corrosion resistance.
• Two-pole snap-action mechanical oat switch.
• Carbon/ceramic shaft seal for maximum life.
• Upper and lower ball bearings for quiet performance and long life.
• 3-year limited warranty.
• Microprocessor controller checks for AC power and battery status.
• Automatically checks status of backup pump every seven days.
• Auto dialer calls any number you choose with a voice alert - program up to ve phone
numbers.
• Smart charging technology eliminates surface charge and brings battery back to optimal
levels.
• Easily connects to any standard phone line. Telephone service required for auto dialer
function.
Catalog
No. Model No. Description
47318 500RSS RS50 – 1/2HP Sump Pump System
RSM33 – Battery backup with Advance Notication & 12-Volt Backup Pump
Sump Pumps
RLT33 System
• Preassembled, solids-handling laundry tray system.
• 10-gallon durable thermoplastic tank
•11/2" NPT inlet with 11/2" discharge
• Energy efcient, oil-lled 1/3HP motors
• Top suction intake lters debris, preventing airlocks for increased reliability
•1/2" solid-handling capacity, thermally protected sump pump
• 360° stainless steel oat guard, for superior switch protection from debris
•11/2" discharge for easy installation and compliance to building codes
• 11" footprint allows installations into tight sump pits
• Stainless steel ttings and impeller plates for corrosion resistance
• Two-pole snap-action mechanical oat switch
• Carbon/ceramic shaft seal for maximum life
• Upper and lower ball bearings for quiet performance and long life
• 3-year limited warranty
Catalog
No.
Model No. Description
47683 RLT33 Rs33 – 1⁄3 HP sump Pump system
LT33 – 10-Gallon Laundry Tray system
DRAIN CLEANING
12.46
Sewage and Effluent Pumps
XD PRO Effluent Pumps
Rugged cast-iron construction features a 1/2" solids-handling capacity and 20’ piggyback
power cord to easily remove grey water (soiled) from septic tanks, sump pits or laundry tray
systems.
•1/2" solids-handling capacity, thermally protected pump.
• Energy efcient, oil-lled motor.
• 20’ piggyback power cord for automatic or manual operation.
• Top suction intake lters debris for increased reliability.
•11/2" discharge for easy installation and compliance to building codes.
• 11" footprint allows installations into basins 11" or wider.
• Stainless steel ttings and impeller plates for corrosion resistance.
• Carbon/ceramic shaft seal for longer life.
• Upper and lower sealed ball bearings for quiet performance and long life.
• 3-year limited warranty.
Catalog
No. Model No. Description
47308 RE33 1/3HP Efuent Pump 60 GPM @ 5'
47303 RE50 1/2HP Efuent Pump 70 GPM @ 5'
12.47
DRAIN CLEANING
Sewage and Effluent Pumps
XD PRO Sewage Pumps
Rugged cast-iron construction features a 2" solids-handling capacity and a high performance
PSC motor designed to accommodate single-family homes, multiple-family homes and small
commercial applications.
RW50T Sewage Pump
• Piggy-back tether oat switch for automatic or manual operation.
• Vortex impeller generates high ow rates while handling up to 2" diameter solids.
• Cast-iron motor and pump housing.
• Ceramic/carbon seal for maximum life.
• Upper bronze bearing and lower ball bearing for quiet performance and long life.
• Designed for residential and light commercial sewage applications.
• Ideal for basement or below grade installations.
• Designed for 18" diameter or larger sewage basins.
• 3-year limited warranty.
RW50V Sewage Pump
• Vertical oat switch for automatic operation.
• Vortex impeller generates high ow rates while handling up to 2" diameter solids.
• Cast-iron motor and pump housing.
• Ceramic/carbon seal for maximum life.
• Upper bronze bearing and lower ball bearing for quiet performance and long life.
• Designed for residential and light commercial sewage applications.
• Ideal for basement or below grade installations.
• Designed for 18" diameter or larger sewage basins.
• Snap-action mechanical oat switch.
• Engineered ow director, shaped to prevent debris from interfering with switch operation.
• 3-year limited warranty.
Catalog
No. Model No. Description
47293 RW50T 1/2HP - 120 Volt Sump Pump 130 GPM @ 5'
47298 RW50V 1/2HP - 120 Volt Sump Pump 130 GPM @ 5'
DRAIN CLEANING
12.48
Sewage and Effluent Pumps
RW50AT Sewage Pump System with AdvanTEXT™ Cellular Monitoring
• Vertical oat switch for automatic operation.
• Vortex impeller generates high ow rates while handling up to 2" diameter solids.
• Cast-iron motor and pump housing.
• Ceramic/carbon seal for maximum life.
• Upper bronze bearing and lower ball bearing for quiet performance and long life.
• Designed for residential and light commercial sewage applications.
• Ideal for basement or below grade installations.
• Designed for 18" diameter or larger sewage basins.
• Snap-action mechanical oat switch.
• Engineered ow director, shaped to prevent debris from interfering with switch operation.
• 3-year limited warranty.
• AdvanTEXT™ Features.
• Text messages triggered by electrical outage and high water condition.
• Two-way communication: Text the unit for status updates from anywhere; Texts up to
three numbers.
Catalog
No. Model No. Description
47288 RW50AT RW50V – 1/2HP Sewage Pump System
RWA2AT – AdvanTEXT™ Cellular Monitoring
12.49
DRAIN CLEANING
Sewage and Effluent Pumps
RW50AT2424 System with AdvanTEXT™ Cellular Monitoring
• Preassembled job ready sewage system
• Sewage pump and tank system designed for residential and light commercial applications
• Ideal for basement or below grade installations
• 24” x 24” polystructural foam basin with 2” side discharge and electrical connection
• Anti-otation rim
• 4” snap-in hub with pipe clamp
Pump Features
• Vertical oat switch for automatic operation
• Vortex impeller generates high ow rates while handling up to 2” diameter solids
• Cast-iron motor and pump housing
• Ceramic/carbon seal for maximum life
• Upper bronze bearing and lower ball bearing for quiet performance and long life
• Designed for residential and light commercial sewage applications
• Ideal for basement or below grade installations
• Designed for 18” diameter or larger sewage basins
• Snap-action mechanical oat switch
• Engineered ow director, shaped to prevent debris from interfering with switch operation
• 3-year limited warranty
AdvanTEXT™ Features
• Text messages triggered by electrical outage and high water condition
• Two-way communication: Text the unit for status updates from anywhere; Texts up to
three numbers
Catalog
No.
Model No. Description
47693 RW50AT2424
Rw50v–½HPsewage Pump system
24” x 24” Polystructural Foam basin
RwA2AT – AdvanTeXTTm Cellular Flood monitoring
DRAIN CLEANING
12.50
Sewage and Effluent Pumps
RW502424 System
• Preassembled job ready sewage system
• Sewage pump and tank system designed for residential and light commercial applications
• Ideal for basement or below grade installations
• 24” x 24” polystructural foam basin with 2” side discharge and electrical connection
• Anti-otation rim
• 4” snap-in hub with pipe clamp
Pump Features
• Vertical oat switch for automatic operation
• Vortex impeller generates high ow rates while handling up to 2” diameter solids
• Cast-iron motor and pump housing
• Ceramic/carbon seal for maximum life
• Upper bronze bearing and lower ball bearing for quiet performance and long life
• Designed for residential and light commercial sewage applications
• Ideal for basement or below grade installations
• Designed for 18” diameter or larger sewage basins
• Snap-action mechanical oat switch
• Engineered ow director, shaped to prevent debris from interfering with switch operation
• 3-year limited warranty
Catalog
No.
Model No. Description
47688 RW502424 Rw50v–½HPsewage Pump system
24” x 24” Polystructural Foam basin
RBSU25 Battery Backup System
Best performing DC backup sump pump in the industry (RBSU25), available as DC stand
alone, or with full featured, self-diagnostic system or as part of AC-DC job-ready combo
system.
• 40 GPM at 5’.
• Reinforced, corrosion-resistant, thermoplastic battery backup sump pump system.
• Reliable reed oat switch for automatic operation.
• Professional grade backup system keeps battery properly charged - requires one 40 Amp
Hr or 75 Amp Hr deep cycle battery.
• Alarm system, with status indicator lights, lets homeowner know when backup system is
active.
• Designed for easy installation without any major plumbing changes.
• 3-year limited warranty.
Catalog
No. Model No. Description
47328 RBSU25 12-Volt Battery Backup System
Backup Systems
12.51
DRAIN CLEANING
RSM33 Battery Backup System with Advance Notification
• 40 GPM at 5’.
• Microprocessor controller checks for AC power and battery status.
• Automatically checks status of backup pump every seven days.
• Auto dialer calls any number you choose with a voice alert - program up to ve phone
numbers.
• Smart charging technology eliminates surface charge and brings battery back to optimal
levels.
• Easily connects to any standard phone line. Telephone service required for auto dialer
function.
• Use any deep cycle 12V battery, maintenance free recommended.
• Preassembled for quick installation.
• 3-year limited warranty.
Catalog
No. Model No. Description
47323 RSM33 12-Volt Battery Backup System with Advanced Notication
Backup Systems
12-Volt Batteries
• 12-Volt AGM deep cycle battery, maintenance free.
• Precharged and ready to use.
• Can be used with all RIDGID battery backup sump pump systems.
• 3-year limited warranty.
Catalog
No. Model No. Description
47868 RBS1240 40 AMP/Hour Battery
47873 RBS1275 75 AMP/Hour Battery
1/6HP Dewatering Pump
• Corrosion-resistant reinforced thermoplastic housing, volute, and impeller.
• Bottom suction design lters and removes water down to 3/8" of surface.
•11/4" NPS discharge with 3/4" garden hose adapter included.
• Easy carry handle for portability.
• 3-year limited warranty.
Catalog
No. Model No. Description
47283 RU16H
1/6 HP Dewatering Pump
11/4" X 16 Ft. Collapsible Hose
44 GPM @ 5’
Utility Pumps
DRAIN CLEANING
12.52
1/4HP Dewatering Pump
• Corrosion-resistant, reinforced thermoplastic motor housing, volute and impeller.
• Bottom suction design lters and removes water fast down to 1/8" of surface.
•3/4" plastic discharge adapter connects to standard garden hose.
• Top center 3/4" discharge design provides balanced installation.
• 20’ power cord to reach the toughest places.
• 3-year limited warranty.
Catalog
No. Model No. Description
85987 TP-250 1/4HP Dewatering Pump
15 GPM @ 5’
Utility Pumps
1/4HP Auto ON/OFF Dewatering Pump
• Water detection technology, turns the pump on and off automatically with the presence of
water.
• Energy efcient, high ow 1/4HP oil-free motor.
• Corrosion-resistant, sealed thermoplastic construction for submersible use.
•11/4" discharge with garden hose adapter included.
• Bottom suction design lters debris and removes water down to 3/8" of surface.
• Plug in, and leave the pump unattended for worry-free water removal.
• Motor rated 2.5 Amps.
• 3-year limited warranty.
Catalog
No.
Model
No. Description
47278 RUA25 1/4HP Auto ON/OFF Dewatering Pump
44 GPM @ 5’
1/4HP Auto ON/OFF Dewatering Pump w/Freeze Protection
• Water detection technology, turns the pump on and off automatically with the presence
of water.
• Applications include dewatering pool covers and other situations requiring water removal.
• Built-in debris and freeze protection.
• Check valve reducer included to reduce short-cycling.
• Plug in, and leave the pump unattended for worry-free water removal.
• 25 ft. power cord.
• Energy efcient, high ow oil-free motor.
• Sealed thermoplastic construction for submersible use.
• Strainer lters debris to minimize clogging.
• ON level - 21/8", OFF level - 3/4".
• 3-year limited warranty.
Catalog
No. Model No. Description
47273 RAPC250 1/4HP Auto ON/OFF Dewatering Pump w/Freeze Protection
43 GPM @ 5’
12.53
DRAIN CLEANING
Semi-Trash Pumps
Our gas powered semi-trash pumps are powered by Honda®engines that meet EPA Phase 3
Emission Standards.
• NPT suction/discharge for easy connection to standard discharge hose.
• Passes up to 5/8" solids.
• Rugged, aluminum and cast-iron gasoline-powered water transfer utility pump.
• OHV 4-cycle Honda engine.
• Heavy-duty water transfer pump you can take anywhere.
• Heavy-duty aluminum roll cage and pump housing protect and provide stability.
• 1 gallon gas reservoir.
• Cast-iron pump casing and impeller.
• Maximum suction lift 25’.
• 90-degree discharge tting eliminates discharge hose kinking.
• 3-year limited warranty.
Catalog
No. Model No. Description
85957 TP-4000
4 HP - 2 in. npt
Gasoline-powered Honda GX series OHV Engine
160 GPM @ 5 Ft.
85962 TP-5500
5.5 HP - 3 in. npt
Gasoline-powered Honda GX series OHV Engine
265 GPM @ 5 Ft.
Utility Pumps
Utility Pump Hose Kits
• Rugged durability for high-volume water removal.
• Kit includes: Reinforced intake hose, lay at discharge hose, debris strainer.
• 3-year limited warranty.
Catalog
No. Model No. Description
90702 TP2HK 2" X 20’ Hose Kit for TP-4000 gas powered utility pump
90707 TP3HK 3" X 20’ Hose Kit for TP-5500 gas powered utility pump
DRAIN CLEANING
12.54
Utility Transfer Pump
Transfer Pumps easily and efciently move water from one location to another.
• Rugged, cast-iron pump housing and motor for durability with easy-priming outlet.
• Cast-iron transfer pump pit for tough pump applications.
• Easy-carry cast-iron handle for portability.
• Portable transfer pump you can take anywhere.
• High performance 1/2HP motor.
•3/4" brass hose adapters connect to standard garden hose.
• Applications include drainage, dewatering ooded basements, emptying stock tanks,
draining water heaters, and charging polyglycol radiant heating lines.
• Boosts pressure up to 50 PSI.
• 3-year limited warranty.
Catalog
No. Model No. Description
47268 RU50K
1/2HP cast-iron transfer pump
Reinforced thermoplastic storage case
Suction strainer
3/4" brass hose adapters
950 GPH @ 25’
Utility Pumps
Sewage & Sump Pump Alert Systems
The AdvanTEXT™ Cellular Monitoring system works with any sewage or sump pump to alert
the owner via text message when the power has gone out, is restored or the water level is
above the primary pump.
AdvanTEXT works with any pump, continually monitoring the system and sending text alerts
to the property owner in the event of:
• Rising water.
• Power outages.
• Restoration of power.
• Two-way communication allows the property owner to text command at any time for a
status update.
• Accommodates up to three mobile devices.
• Allows property owner time to take action before ooding occurs.
• AdvanTEXT is sold integrated with RIDGID Sump and Sewage Pumps.
• Integrated battery backup allows for text noti cations during power outages.
• No Internet or land-line telephone connection required.
• Compatible with other commercially available sump and sewage pumps.
• Loud 85 decibel audible alarms alerts property owner of a problem.
• Low monthly texting fee.
• 3-year limited warranty.
Catalog
No. Model No. Description
47598 RWA2AT Single Float Sewage Pump Alert System
47313 RSA2AT Dual Float Sump Pump Alert System
AdvanTEXT™
12.55
DRAIN CLEANING
11/2" Check Valve
• Kit Includes: – 11/2" Check Valve, (2) rubber boots, (4) hose clamps.
• 3-year limited warranty
• Sold as master pack of 10 pieces.
Catalog
No. Model No. Description
47678 57028-RDG1 11/2" sump in-line check valve
Pump Accessories
2" Check Valve
• Kit Includes: – 2" check valve, (2) rubber boots, (4) hose clamps.
• 3-year limited warranty
• Sold as master pack of 6 pieces.
Catalog
No. Model No. Description
47673 66038-RDG1 2" check valve
11/2" Threaded Check Valve
• Kit Includes: – 11/2" threaded check valve, (1) rubber boot, (2) hose clamps.
• 3-year limited warranty
• Sold as master pack of 9 pieces.
Catalog
No. Model No. Description
47668 66005-RDG1 11/2" sump check valve
DRAIN CLEANING
12.56
AdvanTEXT™ Water Sensor
• Detects water as low as 3/16" Perfect for oor drains, water heaters.
• 3-year limited warranty.
Catalog
No. Model No. Description
47663 RFS AdvanTEXT™ Monitoring System “Lay Flat" Water Sensor
Pump Accessories
13.1
WET/DRY VACUUMS
Wet/Dry Vacuums
• Three to sixteen gallon capacities.
• Proprietary motor and blower combination to maximize performance.
• Rugged polypropylene drums are impact and corrosion resistant.
______________________________________________________________________
Type No. of
Models
Gallon
Capacity
Page
No.
Commercial Series
Wet/Dry Vacuums 10 3-16 13.2-13.12
Industrial Series
Wet/Dry Vacuums 3 14-16 13.13
Accessories 35 – 13.14
Filters 7–13.15-13.17
Air Mover 1–
13.18
Quick Connect Pump 1–
13.18
WET/DRY VACUUMS
13.2
Commercial Series
Wet/Dry Vacuums
RIDGID®Wet/Dry Vacs are the highest powered vacuums in the industry – offering 3.5 to 6.5
peak horsepower in 3 to 16 gallon capacities. They are an excellent accessory to your shop
or garage, making easy clean-up for even the most challenging jobs. The RIDGID Wet/Dry
Vacs offer the following features:
• Proprietary motor and patented blower wheel designed to maximize performance.
• Pleated lter has more surface area for greater efciency and longer life.
• Reduced dB sound level resulting in even quieter operation.
• Automatic suction shut-off senses and prevents liquid overow – integral drain plug
makes draining the vacuum easy.
The new ProVac series offers dynamic redesign and styling, a stronger 2-piece drum,
an improved noise reduction system and an advanced 3-layer lter for better motor
performance.
Replace filters – clogged filters
make the vac less effective.
13.3
WET/DRY VACUUMS
Commercial Wet / Dry Vacs
3 Gallon Portable Pro Wet/Dry Vac
The new RIDGID®3 gallon is a compact wet/dry vac that is designed to deliver performance
of a vac 3x its size. It’s lightweight, small size and large carry handle provide comfortable
portability. The built-in suction-powered dustpan makes cleaning quick and easy. The
vacuum’s 3.5 peak horsepower motor, 10-foot power cord, locking expandable hose, and
1-layer standard pleated paper lter will please Pros and DIY’ers alike.
• Portable & compact for easy transportation and storage.
• Built-in suction-powered dust pan feature makes cleaning even easier.
• Patented Qwik Lock™ lter fastening system makes installing or removing your lter
quick, easy and secure.
• Expandable 2'- 7'Tug-A-Long®positive locking hose won’t pull loose during use.
• On-board cord wrap for storage of the 10' power cord.
Specifications
• Drum Size – 3.0 Gallons (US).
• Peak HP – 3.5.
• Air Watts – 168.
• Voltage – 120.
• CFM – 66.
• Amps – 7.0.
• Cord Length – 10 ft.
• U.L. Listed – Yes.
• Replacement Filters – VF3500, VF3501.
• Accessory Size – 17/8".
• Net Weight – 10.5 lb.
Standard Equipment
• 20163 – Fine Dust Filter Fits 3-4 Gallon.
• 29848 – 17/8Car Nozzle.
Catalog
No. Model No. Description
Cord
Length Air Watts Weight
ft. G/h lb. kg
36138 WD3050 3 Gallon Portable Wet/Dry Vac 1135 11.6 5.3
WET/DRY VACUUMS
13.4
Commercial Wet / Dry Vacs
4 Gallon Portable Wet/Dry Vac
The RIDGID®Portable wet/dry vac is designed to deliver powerful performance in a compact
size. Its lightweight, small size and large carry handle provide comfortable portability. Large
rear wheels and front casters provide great mobility and the accessory storage caddy keeps
nozzles and wands close at hand. The vacuum’s 5.0 peak horsepower motor, 20-foot power
cord, blowing capability, locking hose, quiet operation and 3-layer ne dust lter will please
Pros and DIY’ers alike.
• 5.0 Peak HP motor provides powerful performance comparable to larger size wet/dry vacs.
• Lightweight vac is extremely portable.
• Large carry handle is designed for convenient portability.
• Large rear wheels & casters provide great mobility over carpeted oors, thresholds, and
rough oors at job sites.
• Accessory storage caddy keeps accessories organized and close by for easy access.
• Tug-A-Long®locking hose won’t pull loose during use.
•1-7/8" diameter hose offers non-clogging performance similar to larger diameter hoses
with the exibility of smaller diameter hoses.
• Long 20' power cord allows wide area cleaning and wraps neatly around carry handle
when it’s not in use.
• Blowing capability allows the vac to convert to a powerful, portable blower when the
hose is inserted into the exhaust port.
• 3-layer ne dust lter captures ne dust particles such as dry wall dust.
Specifications
• Drum Size – 4 Gallons (US).
• Peak HP – 5.0.
• Voltage – 120.
• CFM – 110.
• Amps – 9.0.
• Cord Length – 20’.
• U.L. Listed – Yes.
• Replacement Filters – VF3500, V3501.
• Accessory Size – 17/8".
• Net Weight – 12 lbs.
Standard Equipment
• 20163 – Fine Dust Filter Fits 3-4 Gallon.
• 31723 – 17/8Crevice Tool.
• 31728 – 17/8Extension Wand.
• 31733 – 17/8Utility Nozzle.
• 31713 – 17/8x 7 Wet/Dry Vac Hose Kit.
Catalog
No.
Model
No. Description
Cord
Length Air Watts Weight
ft. G/h lb. kg
31653 WD4070 4 Gallon Portable Wet/Dry Vac 20 167 17.0 7.7
13.5
WET/DRY VACUUMS
Commercial Wet / Dry Vacs
4.5 Gallon Pro Pack Portable Wet/Dry Vac
• 5.0 Peak HP Motor provides powerful performance comparable to larger size wet/dry vacs.
• The vacs “tool box shape" design allows easy storing, stacking and transport to and from
job sites.
• Self-contained storage allows the hose, 20'power cord and nozzles to be neatly store
inside the vac under hinged covers so transporting the vac to and from job sites is hassle
free.
• Lightweight allowing for easy portability.
• Large cushion grip handle folds at into top of vac. Allows the vac to be easily stacked,
stored and carried.
• Storage brackets keep 2 extension wands stored on board and conveniently accessible.
• Scroll Noise Reduction®is a patented feature that provides quiet operation by precisely
controlling the ow of air through the vac.
• 3-Layer ne dust lter captures ne dust particles such as dry wall dust.
• Tug-A-Long®locking hose locks the expandable 2' to 7' hose to the vac so it won’t pull
loose during use.
• Long 20' power cord allows cleaning over a wide area and stores neatly in the vac.
Specifications
• Drum Size – 4.5 Gal.
• Peak HP – 5.0.
• Air Watts – 162.
• Voltage – 120.
• CFM – 107.
• Amps – 9.0.
• Cord Length – 20'.
• U.L. Listed – Yes.
• Replacement Filters – VF3500.
• Accessory Size – 17/8".
Standard Equipment
• 20163 – Fine Dust Filter Fits 3-4 Gallon.
• 31718 – 17/8Dusting Brush.
• 31723 – 17/8Crevice Tool.
• 31728 – 17/8Extension Wand.
Catalog
No.
Model
No. Description Air Watts Weight
G/h lb.
31663 WD4522 4.5 Gallon Pro Pack 162 18.50
WET/DRY VACUUMS
13.6
Commerical Wet / Dry Vacs
6 Gallon Wet/Dry Vac w/ accessory pack
The RIDGID®6 Gallon High Performance Wet/Dry Vac is designed for those who want
a traditionally styled, compact vac that delivers the powerful performance and rugged
durability required for job site clean-up. This vacuum’s 6 gallon drum size results in a
more compact design that requires less storage space on a service truck or in a work shop
or garage. And its top carry handle makes transporting easier than ever. It features the
Patented Qwik Lock™ Filter Fastening System that makes installing or removing your lter
quick, easy & secure.
• 2.5 Peak HP Motor delivers the required power for efcient clean-up of small to medium
sized messes.
• 6 gallon drum provides the capacity to clean-up spills and messes at the job-site or in the
work shop.
• Accepts dust bags to further re duce mess and cleanup time. Dust bag model number
VF3503.
• 4 swivel casters provide easy 360 degree mobility.
• On-board accessory storage for up to 4 items. No more searching and fumbling to nd
accessories.
• Lower center of gravity helps prevent tipping. Compact design stores more easily.
• 1-layer standard pleated paper lter captures common everyday dirt.
• 7'Tug-A-Long®locking hose won‘t pull loose during use.
• Top carry handle makes transporting the vac to and from jobs easy.
Specifications
• Drum Size – 6 Gallons (US).
• Peak HP – 2.5.
• Air Watts – 124.
• Voltage – 120.
• CFM – 62.
• Amps – 5.8.
• Cord Length – 10’.
• U.L. Listed – Yes.
• Replacement Filters – VF4000, VF5000, VF6000, VF7000, VF3503.
• Accessory Size – 17/8".
• Net Weight – 12.6 lbs.
Standard Equipment
• 72947 – Everyday Dirt Filter - White; Fits 5-20 gallon vacs.
• 29848 – 17/8Car Nozzle.
• 31718 – 17/8Dusting Brush.
• 31728 – 17/8Extension Wand.
• 31733 – 17/8Utility Nozzle.
• 31738 – 17/8Wet Nozzle.
• 31713 – 17/8x 7 Wet/Dry Vac Hose Kit.
Catalog
No. Model No. Description Air Watts Weight
G/h lb. kg
36683 WD0671 6 Gallon Wet/Dry Vac w/accessory pack 124 15 1/10 6.8
13.7
WET/DRY VACUUMS
Commercial Wet / Dry Vacs
9 Gallon Wet/Dry Vac
The RIDGID®9 Gallon High Performance Wet/Dry Vac is designed for those who want
a traditionally styled, compact vac that delivers the powerful performance and rugged
durability required for job site clean-up. This vacuum’s 9 gallon drum size results in a
more compact design that requires less storage space on a service truck or in a work shop
or garage. And its top carry handle makes transporting easier than ever. It features the
Patented Qwik Lock™ Filter Fastening System that makes installing or removing your lter
quick, easy & secure.
• 3.5 Peak HP motor delivers the required power for efcient clean-up of medium sized
messes.
• 9 gallon drum provides the capacity to clean-up spills and messes at the job-site or in the
work shop.
• Accepts dust bags to further reduce mess and cleanup time. Dust bag model number
VF3503.
• 4 swivel casters provide easy 360 degree mobility.
• On-board accessory storage for up to 4 items. No more searching and fumbling to nd
accessories.
• Lower center of gravity helps prevent tipping. Compact design stores more easily.
• 1-layer standard pleated paper lter captures common everyday dirt.
• 7'Tug-A-Long®locking hose won‘t pull loose during use.
• Top Carry Handle makes transporting the vac to and from jobs easy.
Specifications
• Drum Size – 9 Gallons (US).
• Peak HP – 3.5.
• Air Watts – 175.
• Voltage – 120.
• CFM – 70.
• Amps – 8.2.
• Cord Length – 10'.
• U.L. Listed – Yes.
• Replacement Filters – VF4000, VF5000, VF6000, VF 3503, VF7000.
• Accessory Size – 17/8".
• Net Weight – 14.1 lbs.
Standard Equipment
• 72947 – Everyday Dirt Filter - White; Fits 5-20 gallon vacs.
• 31728 – 17/8Extension Wand.
• 31733 – 17/8Utility Nozzle.
• 31738 – 17/8Wet Nozzle.
• 31713 – 17/8x 7 Wet/Dry Vac Hose Kit.
Catalog
No. Model No. Description Air Watts Weight
G/h lb. kg
41588 WD0970 9 Gallon Wet/Dry Vac 175 16.7 7.6
WET/DRY VACUUMS
13.8
Commerical Wet / Dry Vacs
12 Gallon High Performance Wet/Dry Vac
This newly designed RIDGID®12 Gallon High Performance Wet/Dry Vac is designed for Pro’s
and DIY’ers who want a traditionally styled, medium sized vac that delivers the powerful
performance and rugged durability required for job site clean-up. Its 5.0 peak HP motor
delivers the suction power necessary to handle tough clean-up chores. This vacuum’s 12
gallon drum size results in a more compact design that requires less storage space on a
service truck, in the shop, or in the garage. However, it still offers the capacity to handle
large messes.
• 5.0 Peak HP Motor provides the powerful suction needed for efcient clean up of tough
messes.
• 12 Gallon drum provides capacity for clean-up of large spills & messes at job-sites and
busy shops.
• With the vacuum inlet in the drum, this vac will accept dust collection bags making dry
cleanup even easier.
• 4 swivel casters provide easy 360° mobility.
• Accessory storage space built into the caster feet and hose storage on the lid allows quick
access to all the provided attachments.
• Medium size of vac requires a smaller storage space to store or transport this vac.
• Scroll Noise Reduction®is a patented feature that provides quiet operation by precisely
controlling the ow of air through the vac.
• 1-layer standard pleated paper lter captures common everyday dirt.
• Dual-Flex®locking hose resists collapsing and adds 180˚ exibility at both hose ends.
Hose locks onto vac for uninterrupted cleaning.
• Long 15' power cord allows quick cleaning over a large area.
• Powerful exhaust airstream can be directed through the vac hose to blow debris from
garages, decks, and sidewalks.
• Large built-in drain located to lowest point of drum for emptying of water.
Specifications
• Drum Size – 12 Gallons (US).
• Peak HP – 5.0.
• Air Watts – 227.
• Voltage – 120.
• CFM – 176.
• Amps – 10.0.
• Cord Length – 15'.
• U.L. Listed – Yes.
• Replacement Filters – VF4000, VF5000, VF6000, VF3502, VF7000.
• Accessory Size – 21/2".
• Net Weight – 16.5 lbs.
Standard Equipment
• 72947 – Everyday Dirt Filter - White; Fits 5-20 gallon vacs.
• 72937 – Blower/Car Nozzle.
• 72902 – Extension Wands.
• 72907 – Utility Nozzle.
• 72912 – Wet Nozzle.
• 72897 – 21/2x 7 Universal Vac Hose.
Catalog
No. Model No. Description Air Watts Weight
G/h lb. kg
40103 WD1270 12 Gallon Wet/Dry Vac 227 22.5 10.2
13.9
WET/DRY VACUUMS
Commercial Wet / Dry Vacs
14 Gallon High Performance Wet/Dry Vac
This RIDGID®14 gallon High Performance Wet/Dry Vac is designed to deliver the powerful
suction, large capacity, and rugged construction in a more compact design than is offered
in our largest cart type vacs. The vacuum’s 14 gallon drum size helps us achieve a more
compact overall design but it still provides a big capacity capable of handling large job-
site chores. The 6.0 peak HP motor delivers the high performance necessary to handle
these chores. Other key features include; a 3-layer ne dust lter captures dry wall dust,
accessories are stored on-board, casters provide 360° mobility. Add a top handle with a cord
wrap, heavy duty 2-piece drum construction, a large drain and you’ve got a wet/dry vac that
achieves the demands of Pro’s on the job site or in the shop.
• 6.0 Peak HP motor provides powerful suction to handle tough jobsite clean-up.
• Scroll Noise Reduction®is a patented feature that provides quiet operation by precisely
controlling the ow of air through the vac.
• 4 swivel casters provide easy 360° mobility.
• Quick release on-board accessory holder offers storage space for 5 accessories plus the
hose.
• 2-piece drum provides improved, more rugged construction to meet the higher demands
found on the job site.
• 3-layer ne dust lter captures ne dust particles such as dry wall dust.
• 7'Dual-Flex®locking hose resists collapsing and adds 180˚ exibility at both hose ends.
Hose locks onto vac for uninterrupted cleaning.
• Large carry handle allows easy lifting of vac into service vehicle.
• Long 20' cord wraps neatly around carry handle.
• Powerful exhaust airstream can be directed through the vac hose to blow debris from
garages, decks, and sidewalks.
Specifications
• Drum Size – 14 Gallons (US).
• MOTORPeak HP – 6.0.
• Air Watts – 256.
• Voltage – 120.
• CFM – 179.
• Amps – 11.0.
• Cord Length – 20’.
• U.L. Listed – Yes.
• Replacement Filters – VF3502, VF5000, VF6000, VF7000.
• Accessory Size – 2-1/2".
• Shipping Weight – 26 lbs.
• Net Weight – 22 lbs.
Standard Equipment
• 72952 – Fine Dust Filter - Blue.
• 72937 – Blower/Car Nozzle.
• 72902 – Extension Wands.
• 72907 – Utility Nozzle.
• 72912 – Wet Nozzle.
• 72897 – 21/2x 7 Universal Vac Hose.
Catalog
No. Model No. Description Weight
lb. kg
18718 WD1450 14 Gallon Contractor Wet/Dry Vac 26 11.8
WET/DRY VACUUMS
13.10
Commercial Wet / Dry Vacs
16 Gallon Stainless Steel Wet/Dry Vac With Cart
• 6.5 Peak HP motor provides industry leading power and performance.
• Stainless steel drum provides rugged, attractive, & clean exterior to meet the higher
demands found on the job site.
• 3-layer ne dust lter captures ne dust particles such as dry wall dust.
• Scroll Noise Reduction®is a patented feature that provides quiet operation by precisely
controlling the ow of air through the vac.
• Sturdy cart, push handle, & large rear wheels act together allowing the vac to travel
easily up & down steps and across rough terrain.
• Quick release accessory storage bag keeps accessories close at hand but is quickly
removable to make emptying debris from drum quick and easy.
• 7'Dual-Flex®locking hose resists collapsing and adds 180˚ exibility at both hose ends.
Hose locks onto vac for uninterrupted cleaning.
• Large carry handle allows easy lifting of vac into service vehicle.
• Long 20' cord wraps neatly around carry handle.
• Powerful exhaust airstream can be directed through the vac hose to blow debris from
garages, decks, and sidewalks.
Specifications
• Drum Size – 16 Gallons (US).
• Cord Length – 20’.
• U.L. Listed – Yes.
• Replacement Filters – VF3502, VF5000, VF6000, VF7000.
• Accessory Size – 2-1/2".
• Shipping Weight – 38.5 lbs.
• Net Weight – 27.8 lbs.
Motor
• Peak Horsepower – 6.5.
• Air Watts – 294.
• Voltage – 120.
• CFM – 203.
• Amps – 12.0.
Standard Equipment
• 72952 – Fine Dust Filter - Blue.
• 72932 – Crevice Tool.
• 72937 – Blower/Car Nozzle.
• 72902 – Extension Wands.
• 72907 – Utility Nozzle.
• 72912 – Wet Nozzle.
• 72897 – 21/2x 7 Universal Vac Hose.
Catalog
No. Model No. Description Weight
lb. kg
31703 WD1956 16 Gallon Steel Tank Wet/Dry Vac 38.5 17.4
13.11
WET/DRY VACUUMS
Commercial Wet / Dry Vacs
16 Gallon Wet/Dry Vac with Detachable Blower
This newly designed RIDGID®16 gallon wet/dry vac is a multifunctional powerhouse. Its powerful
motor and large drum size allow it to perform extremely well as a conventional vac. In addition,
the vacuum’s power head detaches and quickly converts into a 180 peak MPH handheld blower
with a locking blowing wand that outperforms most dedicated leaf blowers. The quick-release
cord wrap lets you spend less time unwrapping the 20'cord, and more time on the job. The caddy
conveniently keeps your accessories and hose close at hand. It’s like two incredible tools in one.
• Detachable hand held blower provides 180 mph wind for removing debris from walkways,
decks, yards, driveways, job sites, tools, etc. Performance meets or exceeds that of
dedicated lawn & garden leaf blowers.
• New, dedicated blowing wand positively locks into the blowing port so it won’t blower loose.
• 6.5 peak horsepower motor provides maximum power for the heavy-duty pickup of water &
debris in the shop, basement, garage or on the job.
• Scroll Noise Reduction®is a patented feature that provides quiet operation by precisely
controlling the ow of air through the vac.
• Four swivel casters provide 360°, freewheeling maneuverability of the vac when pushed or
pulled in any direction.
• 7'Dual-Flex®locking hose resists collapsing and adds 180˚ exibility at both hose ends. Hose
locks onto vac for uninterrupted cleaning.
• Innovative accessory storage provides space for 7 individual items. No more searching or fumbling
to nd accessories.1-layer standard pleated paper lter captures common everyday dirt.
• 1-layer standard pleated paper lter captures common everyday dirt.
• 20'Extra long power cord accommodates wide area cleaning.
• Large built-in drain located at lowest point of drum for emptying of water.
Specifications
• Drum Size – 16 Gallons (US).
• Cord Length – 20’.
• U.L. Listed – Yes.
• Replacement Filters – VF4000, VF5000, VF6000, VF7000, VF3502.
• Accessory Size – 2-1/2".
• Shipping Weight – 29 lbs.
• Net Weight – 25.5.
Motor
• Peak Horsepower – 6.5.
• Air Watts – 286.
• Voltage – 120.
• CFM – 172.
• Amps – 12.0.
Standard Equipment
• 72947 – Everyday Dirt Filter - White; Fits 5-20 gallon vacs.
• 72937 – Blower/Car Nozzle.
• 72902 – Extension Wands.
• 72907 – Utility Nozzle.
• 72912 – Wet Nozzle.
• 72897 – 21/2x 7 Universal Vac Hose.
Catalog
No. Model No. Description Weight
lb. kg
40108 WD1680 16 Gallon Wet/Dry Vac w/Detachable Blower 29 13.10
WET/DRY VACUUMS
13.12
Commercial Wet / Dry Vacs
16 Gallon High Performance Wet/Dry Vac With Cart
• 6.5 Peak HP motor – powerful suction picks up about 1 gallon of water per second.
• Scroll Noise Reduction®is a patented feature that provides quiet operation by precisely controlling
the ow of air through the vac.
• Sturdy cart, push handle, & large rear wheels act together allowing the vac to travel easily up &
down steps and across rough terrain.
• Quick release accessory storage bag keeps accessories close at hand but is quickly removable to
make emptying debris from drum quick and easy.
• 2-piece drum provides improved, more rugged construction to meet the higher demands found on the
job site.
• 3-layer ne dust lter captures ne dust particles such as dry wall dust.
• 7'Dual-Flex®locking hose resists collapsing and adds 180˚ exibility at both hose ends. Hose locks
onto vac for uninterrupted cleaning.
• Large carry handle allows easy lifting of vac into service vehicle.
• Long 20' cord wraps neatly around carry handle.
• Powerful exhaust airstream can be directed through the vac hose to blow debris from garages,
decks, and sidewalks.
Specifications
• Drum Size – 16 Gallons (US).
• Cord Length – 20'.
• U.L. Listed – Yes.
• Replacement Filters – VF3502, VF5000, VF6000, VF7000.
• Accessory Size – 2-1/2".
• Shipping Weight – 32.8 lbs.
• Net Weight – 28.2 lbs.
Motor
• Peak HP – 6.5.
• Air Watts – 306.
• Voltage – 120.
• CFM – 203.
• Amps – 12.0.
Standard Equipment
• 72952 – Fine Dust Filter - Blue.
• 72932 – Crevice Tool.
• 72937 – Blower/Car Nozzle.
• 72902 – Extension Wands.
• 72907 – Utility Nozzle.
• 72912 – Wet Nozzle.
• 72897 – 21/2x 7 Universal Vac Hose.
• 72927 – Mufer/Diffuser.
Catalog
No.
Model
No. Description Weight
lb. kg
31693 WD1851 16 Gallon Contractor Wet/Dry Vac 32.8 14.9
13.13
WET/DRY VACUUMS
Industrial Wet / Dry Vacs
Industrial Series Wet/Dry Vacuums
RIDGID®2 Stage Wet/Dry Vacuums are designed and built for the toughest heavy debris and uid
pickup applications.
• Powerful heavy-duty, dual-stage motor provides maximum suction power.
• Power head with a patented SNR “Scroll Noise Reduction" design provides better airow and
suction with less noise, resulting in more power and quieter operation.
• Tug-A-Long positive locking mechanism securely locks the hose to the vacuum so the hose will not
pull out during use.
• Dual layer hose provides maximum durability and crush resistance.
• Rugged polypoplyene drum is impact and corrosion resistant.
• Heavy-duty cart system with large non-marring wheels provide effortless movement over the
toughest terrains. The quick-release cart handle allows emptying the drum easily.
• Removable accessory storage bag keeps accessories together and accessible.
• Fine particle lter provides exceptional ltration, including for dry wall dust. It is washable, reusable,
clogs less and can be used for both wet and dry operation.
Standard Equipment
• 23743 – Dust Bag Filter Fits 12 - 16 Gallon.
• 72952 – Fine Dust Filter - Blue.
• 72932 – Crevice Tool.
• 72902 – Extension Wands.
• 72907 – Utility Nozzle.
• 72912 – Wet Nozzle.
• 72922 – Floor Brush.
• 72927 – Mufer/Diffuser.
• 24608 – 4X Pro Hose Replacement.
• 41603 – Turbo “Beater Bar" Kit.
Catalog
No.
Model
No. Description
Sealed
Pressure Airflow Air
Watts
Cord
Length Weight
cubic in. in. lb. kg
25648 RV2400A 14 Gallon Commercial Vac 100 105 255 25 37.2 16.9
40048 RV2400HF 14 Gallon Certied HEPA Filtration Vac 100 105 255 25 37.2 16.9
25653 RV2600B 16 Gallon Commercial Vac w/ Indus-
trial Acc. Kit 100 105 255 25 40.1 18.2
WET/DRY VACUUMS
13.14
Accessories
17/8" Accessories
Catalog
No. Model No. Description
29848 VT1781 1 7/8Car Nozzle
31718 VT1701 1 7/8Dusting Brush
31723 VT1702 1 7/8Crevice Tool
31728 VT1708 1 7/8Extension Wand
31733 VT1709 1 7/8Utility Nozzle
31738 VT1710 1 7/8Wet Nozzle
40163 VT 1712 1 7/8Crevice Tool/Dusting Brush
40168 VT 1714 1 7/8Floor Brush
41593 VT1711 17/8"to11/4" Adapter
Accessories
21/2" Accessories
Catalog
No. Model No. Description
72887 VT 2501 Dusting Brush
72902 VT 2508 Extension Wands
72907 VT 2509 Utility Nozzle
72912 VT 2510 Wet Nozzle
72922 VT 2514 Floor Brush
72932 VT 2502 Crevice Tool
72937 VT 2503 Blower/Car Nozzle
Kits/Hoses/Etc.
Catalog
No. Model No. Description
24608 VT 2570 4X Pro Hose Replacement
26573 VT 2530 Multi-Surface Nozzle with Brush
26578 VT 2540 Claw Nozzle
31713 VT 1720 1 7/8x 7 Wet/Dry Vac Hose Kit
31743 VT 1755 3 Piece Adapter Kit
32698 VT 2534 Auto Detailing Kit: 7 piece Kit w/4X Hose
32703 VT 2575 Heavy Duty CLeaning Kit: 12 Piece Kit w/Stainless Steel Extension Wands
41598 VT 2561 Filter Nut/Drain Cap Combo
41603 VT 2571 Turbo “Beater Bar" Kit
72897 VT 2520 2 1/2x 7 Universal Vac Hose
72927 VT 2525 Mufer/Diffuser
Replacement 2-Stage Service Parts
Catalog
No. Model No. Description
31073 832077 Nozzle Master
31078 832079 Floor Brush Insert
31083 832080 Carpet Insert
31088 832078 Squeegee Insert
31103 832068 Extension Handle Assembly - Curved
31108 832069 Extension Handle Assembly - Straight
13.15
WET/DRY VACUUMS
Everyday Dirt 1-Layer Pleated Paper Filter
The RIDGID®1-layer replacement wet/dry vac lter is great for everyday dirt. Everyday dirt
is best described as sawdust or typical debris found in a basement, garage or vehicle. With
its patented Qwik Lock™ feature, it simply snaps on or off the vacuum for easy cleaning. The
lter ts all RIDGID wet/dry vacuums 5 gallons and larger.
• Qwik Lock™ fastening system.
• Fits all RIDGID brand vacs 5 gallons and larger.
• Washable and reusable.
• Includes 1 lter per package.
Specifications
• Best for
– Sawdust.
– Typical Basement, Garage, or Car Dirt.
• Fits vac sizes – 5-20 gallons.
Catalog
No. Model No. Description
72947 VF4000 Everyday Dirt Filter - White; Fits 5-20 gallon vacs
Filters
Fine Dust 3-Layer Pleated Paper Filter
The RIDGID 3-layer pleated paper lter features a double-pleated design that captures ne
particles such as dust, drywall sanding and replace ash. With its patented Qwik Lock™
feature, it simply snaps on or off the vacuum for easy cleaning. The lter ts all RIDGID wet/
dry vacuums 5 gallons and larger.
• Captures 99% of all particles 1 micron in size and larger.
• Ideal for capturing drywall dust.
• Qwik Lock™ fastening system.
• Fits all RIDGID brand vacs 5 gallons and larger.
• Washable and reusable.
• Includes 1 lter per package.
Specifications
• Best for – Sawdust.
– Typical Basement, Garage, or Car Dirt.
– Drywall Dust.
– Cement Dust.
– Cold Ashes (Fireplace, BBQ Grill).
– Fine Powders (Flour, Talcum Power, Baby Powder, Chalk).
• Fits vac sizes – 5-20 gallons.
Catalog
No. Model No. Description
72952 VF5000 Fine Dust Filter - Blue
WET/DRY VACUUMS
13.16
Wet Application Filter
The VF7000 is designed for high-volume liquid pickup. This lter adds protection for your
vac during wet pick-up by keeping water-borne debris out of the motor. With its patented
Qwik Lock™ feature, it simply snaps on or off the vacuum for easy cleaning. The lter ts all
RIDGID®wet/dry vacuums 5 gallons and larger.
• For High-Volume liquid pick-up.
• Qwik Lock™ Fastening system.
• Fits all RIDGID brand vacs 5 gallons and larger.
• Washable and reusable.
• Includes 1 lter per package.
Specifications
• Best for – Wet Pick-Up Only.
– High-Volume Liquids.
– Water-borne Debris.
• Fits Vac Sizes – 5-20 gallons.
Catalog
No. Model No. Description
40158 VF7000 Wet Application Filter
Filters
5-Layer Allergen Filter
The RIDGID 5-Layer replacement allergen lter is made from HEPA-rated material and
removes 99.97% of all particles .3 microns and larger from the air. Allergens cleaned from
the air might include particles such as pet dander and pollen. With its patented Qwik Lock™
feature, it simply snaps on or off the vacuum for easy cleaning. The lter ts all RIDGID wet/
dry vacuums 5 gallons and larger.
• Captures 99.97% of all particles 0.3 micron in size and larger.
• Ideal for capturing allergens.
• Qwik Lock™ fastening system.
• Fits all RIDGID brand vacs 5 gallons and larger.
• Washable and reusable.
• Includes 1 lter per package.
Specifications
• Best for – Sawdust.
– Typical Basement, Garage, or Car Dirt.
– Drywall Dust.
– Cement Dust.
– Cold Ashes (Fireplace, BBQ Grill).
– Fine Powders (Flour, Talcum Power, Baby Powder, Chalk).
– Pet Dander.
– Pollens.
– Allergens.
– Fine Indoor Particles (Upholstery, Dust Mites, Mold Spores, Dryer Lint, Furnace Filter).
• Fits Vac Sizes – 5-20 gallons.
• Not EPA RRP qualied.
Catalog
No. Model No. Description
97457 VF6000 HEPA Filter - Green
13.17
WET/DRY VACUUMS
High-Efficiency Dust Bags - VF3501
The RIDGID®High-Efciency Dust Bag helps you clean up dry debris such as sawdust or
drywall dust while keeping the vacuum drum clean. The bag ts 4 to 5 gallon RIDGID wet/
dry vacs.
• Ideal for picking up ne particles of dust and dirt.
• Keeps the inside of the vac drum clean.
• Includes 2 lter collection bags.
• Fits 4 to 5 gallon RIDGID wet/dry vacs.
• Easily discarded.
Catalog
No. Model No. Description
23738 VF3501 Dust Bag Filter Fits 3 - 4.5 Gallon
Filters
High-Efficiency Dust Bags - VF3502
The RIDGID High-Efciency Dust Bag helps you clean up dry debris such as sawdust or
drywall dust while keeping the vacuum drum clean. The bag ts 12 to 16 gallon RIDGID wet/
dry vacs.
• Ideal for picking up general debris.
• Great for picking up ne particles of dust and dirt.
• Keeps the inside of the vac drum clean.
• Includes 2 lter collection bags.
• Fits 12 to 16 gallon RIDGID wet/dry vacs.
• Easily discarded.
Catalog
No. Model No. Description
23743 VF3502 Dust Bag Filter Fits 12 - 16 Gallon
High-Efficiency Dust Bags - VF3503
The RIDGID High-Efciency Dust Bag helps you clean up dry debris such as sawdust or
drywall dust while keeping the vacuum drum clean. The bag ts 6 to 9 gallon RIDGID wet/
dry vacs.
• Ideal for picking up ne particles of dust and dirt.
• Keeps the inside of the vac drum clean.
• Includes 2 lter collection bags.
• Fits 6 to 9 gallon RIDGID wet/dry vacs.
• Easily discarded.
Catalog
No. Model No. Description
40153 VF3503 Dust Bag Filter Fits6-9Gallon
WET/DRY VACUUMS
13.18
Professional Portable Air Mover
• Quick Drying Action Our RIDGID Air Mover Can Be Used to Dry Wet Floors, Wet Carpet,
and Any Water Damaged Areas. The Air Mover also can be used to Dry Shampooed
Upholstery, Dry Drywall Mud, and Provide Ventilation, etc..
• 3- Position Base Varies Direction of Airow Multi - Position Housing Direct Air Upward by
Tilting Unit to a Stable 45° or 90° Position.
• New, Professional Styling Bold Color Signals Caution while Drying Slippery Floors.
• Professional Grade Durable, High Impact Housing Rugged Construction for Durability -
Stacks Easily.
• For Residential and Commericial Use.
• Long 30'power cord for extended reach with a built-in cord wrap.
• Heavy duty .4 HP induction motor with three airow speed settings (3.2 Amp, 2.7 Amp. 2.2
Amp) generates up to 1625 cfm.
Specifications
• Motor – 0.4 HP, 3.0 AMP.
• Speeds – 3.
• Power Cord – 30’.
• Weight–35lbs.
Catalog
No. Model No. Description Cord Length Weight
ft. lb. kg
41438 AM2560 Air Mover 30 35 16.0
Air Mover
Quick Connect Pump
Ideal accessory for any RIDGID wet/dry vacuum with a drain. Pumps up to 10 gallons per
minute.
Catalog
No. Model No. Description Capacity GPH Weight
G/h lb. kg
26453 VP2000 Quick Connect Pump 600* 2 0.9
*Capacity in gallons per hour at zero foot discharge height
Pumps
14.1
INDEX
#
1/4HP Auto ON/OFF Dewatering Pump ................... 12.52
1/4HP Auto ON/OFF Dewatering Pump w/Freeze
Protection................................................................. 12.52
1/4HP Dewatering Pump.......................................... 12.52
1/6HP Dewatering Pump.......................................... 12.51
10' (3.1m) Heavy-Duty Wind .................................... 12.27
11⁄2" Check Valve ...................................................... 12.55
11⁄2" Threaded Check Valve...................................... 12.55
12 Gallon High Performance Wet/Dry Vac ................ 13.8
12-Volt Batteries ...................................................... 12.51
122 Cutting and Prep Machine .................................. 3.12
122XL Copper Cutting and Prep Machine.................. 3.13
127 Inner-Outer Reamer............................................. 3.22
14 Gallon High Performance Wet/Dry Vac ................ 13.9
1450 Pressure Test Pump............................................. 9.2
16 Gallon High Performance Wet/Dry Vac With Cart 13.12
16 Gallon Stainless Steel Wet/Dry Vac With Cart 13.10
16 Gallon Wet/Dry Vac with Detachable Blower 13.11
18V Advanced Lithium 2.0Ah Battery........................ 11.1
18V Advanced Lithium 4.0Ah Battery........................ 11.1
2-in-1 Close Quarters AUTOFEED™ Cutter................ 3.15
200' Mini Color Reel (Self-Leveling ........................... 11.6
223S/227S Inner-Outer Reamer................................. 3.22
238-P Powered Soil Pipe Cutter................................... 3.5
25' (7.6 m) Inner Core w/ Bulb Auger ..................... 12.27
25' (7.6 m) Inner Core w/Drop Head Auger ............. 12.27
25' (7.6 m) w/Bulb Auger ......................................... 12.27
25' (7.6 m) w/Drop Head Auger ............................... 12.27
25' (7.6 m) w/Male Coupling ................................... 12.27
2" Check Valve.......................................................... 12.55
3 Gallon Portable Pro Wet/Dry Vac............................ 13.3
300 Series Plumbing Benders...................................... 8.2
345 Manual Flare Tool ................................................. 8.6
35' (10.7 m) w/Bulb Auger ....................................... 12.27
35' (10.7 m) w/Male Coupling ................................. 12.27
4 Gallon Portable Wet/Dry Vac.................................. 13.4
4-Wheel Pipe Cutters................................................... 3.3
4.5 Gallon Pro Pack Portable Wet/Dry Vac................ 13.5
400 Series Instrument Benders.................................... 8.2
5-Layer Allergen Filter.............................................. 13.16
50' (15.2 m) w/Bulb Auger ....................................... 12.27
50' (15.2 m) w/Drop Head Auger ............................. 12.27
500RSS System........................................................ 12.45
6 Gallon Wet/Dry Vac w/ accessory pack ................. 13.6
6 mm Diameter Imager Head Accessory ................. 11.23
600 Series Heavy-Duty Instrument Benders................ 8.3
602 Support Arm........................................................ 4.13
692 Support Arm........................................................ 4.14
71⁄2' (2.3 m) All-Purpose Wind.................................. 12.27
71⁄2' (2.3 m) Tight-Wind ............................................ 12.27
71⁄2' (2.3 m) All-Purpose Wind w/Plastic Core 12.27
819 Nipple Chuck Kit.................................................. 4.31
9 Gallon Wet/Dry Vac ................................................ 13.7
915 Roll Groover........................................................... 5.3
918 Roll Groover........................................................... 5.6
918-I Roll Groover ........................................................ 5.7
920 Roll Groover........................................................... 5.8
975 Combo Roll Groover .............................................. 5.4
A
AC Adapter............................................................... 11.17
AC Battery Adapter.................................................... 11.1
Accessories.............................................................. 13.14
Adapter..................................................................... 12.27
Adjustable Pipe Supports............................................. 2.5
Adjustable Stand with Steel Rollers............................ 2.5
Adjustable Wrenches................................................... 1.6
Advanced Lithium Battery Charger (N. America) 11.1
AdvanTEXT™............................................................ 12.54
AdvanTEXT™ Water Sensor .................................... 12.56
Air Mover ................................................................. 13.18
Aluminum End Wrenches............................................. 1.3
Aluminum Level............................................................ 7.4
Aluminum Offset Pipe Wrenches................................. 1.4
Aluminum Pipe Wrenches............................................ 1.2
Aluminum RapidGrip®Wrenches ................................ 1.3
Aluminum Straight Pipe Wrenches.............................. 1.2
Anvils............................................................................ 7.3
ASTM F 1807 PEX Crimp Tools ................................ 10.12
Auto-Clean™/K-30 Sink Machine.............................. 12.9
AUTOFEED-K-6200................................................... 12.19
B
Backup Systems ....................................................... 12.50
Ball Transfer Head........................................................ 2.4
Basin Wrenches ........................................................... 1.7
Bench Chain Vises........................................................ 2.2
Bench Yoke Vises ......................................................... 2.3
Bending & Forming....................................................... 8.2
Beveling Die ............................................................... 4.29
Bi-Metal Hack Saw Blades.......................................... 7.6
Bolt Cutters ................................................................ 7.11
Bolt Die....................................................................... 4.29
Button Die .................................................................... 4.7
C
Cable Cutters.............................................................. 7.12
Cable Kit................................................................... 12.27
Cable Trimmers .......................................................... 7.12
Carrying Case ............................................................. 4.13
Carrying Cases ............................................................. 4.4
Chain Tongs.................................................................. 1.6
Chain Wrenches........................................................... 1.5
Close Quarters Tubing Cutters ................................... 3.14
Coil & Flat Spring Assembly ........................................ 1.9
Color Camera Head - Self-Leveling NTSC (115V 11.6
Combination Kit............................................................ 6.4
Compact Series ASTM F 1807 Jaws (For PEX Tubing).......10.8
Compact Series Jaws for ProPress®System.................... 10.7
Compact Series Jaws For PureFlow™ System................. 10.7
Compact Series Press Jaws....................................... 10.7
Compact2 Monitor Side Plate Spare Kit.................... 11.1
Compact2/CS6Pak Monitor Handle........................... 11.1
Compound Leverage Wrenches................................... 1.5
Conduit Benders........................................................... 8.4
Constant Swing Tubing Cutters ................................. 3.15
Conveyor Head Pipe Stands......................................... 2.4
Copper Cleaning Brushes........................................... 3.21
Copper Cutting Prep Machines.................................. 3.12
Core Drill Bits............................................................... 6.7
CS6Pak Digital Recording Monitor ............................ 11.1
CS6Pak w/2 Batteries and 1 Charger ........................ 11.1
Cutting & Drilling ......................................................... 6.2
D
Deburring Tools .......................................................... 3.22
Demolition blade.......................................................... 6.6
Die Head....................................................................... 4.5
Drain & Sewer Video Inspection.............................. 11.10
Drum Machines........................................................ 12.14
Dry Cut Saw / Model 614 .......................................... 3.11
E
Electrician Kit ............................................................... 6.4
Enclosed Feed Tubing Cutters.................................... 3.16
Enclosed Ratchet Threader Sets.................................. 4.3
End Aluminum Handle Assembly................................. 1.9
End iron handle Assembly............................................ 1.9
End Pipe Wrenches...................................................... 1.3
Everyday Dirt 1-Layer Pleated Paper Filter .............. 13.15
Exposed Ratchet Bolt Threader Sets ........................... 4.4
Exposed Ratchet Threader Sets................................... 4.3
F
F-Series Vises............................................................... 7.2
Faucet & Sink Installer................................................. 1.7
Fiberglass Folding Rules .............................................. 7.7
Filters........................................................................ 13.15
Fine Dust 3-Layer Pleated Paper Filter..................... 13.15
Flaring Tools ................................................................. 8.6
Floating Transmitter ................................................. 11.37
Foam Core Cutter ....................................................... 3.21
Folding Rules................................................................ 7.7
Forged Anvils................................................................ 7.3
G
Geared Ratchet Tube Benders ..................................... 8.3
Grappler Hook ............................................................ 12.7
H
H-10 Cart with Hose Reel ........................................ 12.38
H-10 Cart with Hose Reel and 100' x 3/16" Trap Hose 12.38
H-30 Cart with Hose Reel ........................................ 12.38
Hammer-Type Flaring Tools.......................................... 8.7
Hammers...................................................................... 7.5
Hand Spinners............................................................ 12.8
Hand Tools.................................................................. 12.6
Hand-Held Power Drives............................................ 4.15
Hand-Held Video Inspection .................................... 11.20
Alphabetical Index
INDEX
14.2
HC300 Hole Cutting Tool.............................................. 6.2
HC450 Hole Cutting Tool.............................................. 6.3
Heavy Duty Flare Tool .................................................. 8.7
Heavy-Duty Offset Pipe Wrenches .............................. 1.4
Heavy-Duty Pipe Cutters.............................................. 3.2
Heavy-Duty Pipe Wrenches ......................................... 1.2
Heavy-Wall Conduit Benders....................................... 8.4
Heel Jaw & Pin Assembly............................................ 1.9
Hex Wrenches.............................................................. 1.4
High-Efficiency Dust Bags - VF3501......................... 13.17
High-Efficiency Dust Bags - VF3502......................... 13.17
High-Efficiency Dust Bags - VF3503......................... 13.17
Hinged Pipe Cutters ..................................................... 3.3
Hole Cutting Tools........................................................ 6.2
Hole Saw...................................................................... 6.5
Hole Saw Arbors.......................................................... 6.4
Hole Saw Kit ................................................................ 6.4
Hook Jaw ..................................................................... 1.9
Hydraulic Benders ........................................................ 8.7
Hydraulic Benders - Tip-Up Wing ................................ 8.7
Hydraulic Knockout Kits............................................. 7.10
I
Industrial Series Wet/Dry Vacuums......................... 13.13
Inner-Outer Copper Cleaning Brush ........................... 3.21
Internal Tubing Cutters............................................... 3.17
Internal Wrenches........................................................ 1.8
J
Jet Vac ..................................................................... 12.38
K
K-1000 Rodder Machine .......................................... 12.36
K-1500 Sectional Machine....................................... 12.30
K-1500G Sectional Machine.................................... 12.34
K-1500SP Sectional Machine .................................. 12.32
K-25 Hand Spinner..................................................... 12.8
K-26 Hand Spinner..................................................... 12.8
K-3 and K-6 Toilet Augers .......................................... 12.6
K-3800 Drum Machine............................................. 12.16
K-40 Sink Machine................................................... 12.10
K-400 Drum Machine............................................... 12.14
K-45 Sink Machine................................................... 12.12
K-5 Grappler Hook...................................................... 12.7
K-50 Sectional Machine........................................... 12.26
K-60 Sectional Machine........................................... 12.28
K-6200 Drum Machine............................................. 12.18
K-750 Drum Machine............................................... 12.20
K-7500 Drum Machine............................................. 12.22
K-750R Drum Machine............................................. 12.24
KJ-1350 Adapter to Fit H-30 Cart ............................ 12.38
KJ-1350 Water Jetter.............................................. 12.38
KJ-1750 Water Jetter.............................................. 12.39
KJ-2200 Water Jetter.............................................. 12.40
KJ-3100 Water Jetter.............................................. 12.42
Knockout Sets ............................................................ 7.10
Kwik-Spin®Hand Spinner with AUTOFEED®............. 12.9
L
Large Diameter Pipe Stand.......................................... 2.5
Levels ........................................................................... 7.4
Lever Benders............................................................... 8.2
M
Machine with A-1 RIDIGD Drain Cleaning Mitt, A-12 Pin
Key, and A 34-12 Rear Guide Hose.......................... 12.32
Machine with A-1 RIDIGD Drain Cleaning Mitt, A-12 Pin
Key, and A-34-12 Rear Guide Hose, Plus SE Tool Kit (see
below)....................................................................... 12.32
Machined Aluminum Level .......................................... 7.4
Manual Knockout Kits................................................ 7.10
Manual Ratchet Threaders .......................................... 4.3
Manual Receding Threaders...................................... 4.10
Manual Threading...................................................... 4.10
MegaPress®Jaws & Rings...................................... 10.11
MegaPress®Jaws And Rings.................................. 10.11
micro CA-100 Inspection Camera ............................ 11.21
micro CA-25 Digital Inspection Camera................... 11.20
micro CA-300 Inspection Camera ............................ 11.22
micro CD-100 Combustible Gas Detector................ 11.27
micro IR-100 Non-Contact Infrared Thermometer 11.24
micro LM-100 Laser Distance Meter....................... 11.25
micro LM-400 Advanced Laser Distance Meter 11.26
Mini Hose Reel......................................................... 12.38
Model 10 Screw Extractor Set................................... 7.14
Model 1205 PVC/ABS Saw.......................................... 7.6
Model 1215 Threading Machine................................ 4.22
Model 1224 Threading Machine................................ 4.26
Model 212 Pro Arc Saw............................................... 7.6
Model 25 Screw and Pipe Extractor Set.................... 7.15
Model 258 Power Pipe Cutter...................................... 3.9
Model 258XL Power Pipe Cutter................................ 3.10
Model 300 Compact Threading Machine .................. 4.23
Model 300 Power Drive ............................................. 4.16
Model 300 Power Drive Complete............................. 4.17
Model 418 Oiler ......................................................... 4.12
Model 456 Tri-Bender .................................................. 8.3
Model 535 Threading Machine.................................. 4.21
Model 535A Automatic Threading Machine ............. 4.19
Model 700 Power Drive ............................................. 4.15
Model S Tube Expander ............................................... 8.5
Model SF-2500 SuperFreeze........................................ 9.4
Models KT-190 / KT-200 Pipe Thawers ....................... 9.5
Monitors & Recorders.............................................. 11.15
Multi-Purpose 6-in-1 Screwdriver................................ 7.8
N
NaviTrack Brick-5Watt.......................................... 11.36
NaviTrack II Locator.................................................. 11.34
NaviTrack Line Transmitter - 10 Watt...................... 11.36
NaviTrack Scout®Locator ........................................ 11.35
NaviTrack®Locators................................................. 11.34
NaviTrack®Transmitters .......................................... 11.36
Nightshade Torpedo Level ........................................... 7.4
Nipple Chucks / Adapters.......................................... 4.31
No. 1380 Cable Cutter................................................ 7.12
No. 206 Soil Pipe Cutter............................................... 3.4
No. 226 In-Place Soil Pipe Cutter................................. 3.4
No. 228 Soil Pipe Assembly Tool ................................. 3.6
No. 246 Soil Pipe Cutter............................................... 3.5
No. 276 Soil Pipe Cutter............................................... 3.6
No. 575 EMT Sizing Tool for Conduit......................... 3.21
No. 606 Standard Shape with Tray.............................. 7.7
No. 65R-C Manual Receding Threader........................ 4.8
No. 65R-TC Manual Receding Threader...................... 4.8
No. 87 ACSR Cable Trimmer ...................................... 7.12
No. KOPD-254 ............................................................ 7.11
No. KOPD-52 .............................................................. 7.11
Nozzle Cleaning Tool................................................ 12.38
Nut, wrench parts ........................................................ 1.9
Nylon Storage Bag................................................... 12.38
O
Oiler w/1 Gal. Premium Thread Cutting Oil............... 4.13
One Stop Wrenches..................................................... 1.8
One-Piece Flat Sewer Tape........................................ 12.7
Optional Die Heads.................................................... 4.25
P
P-Trap Cutter ............................................................ 12.19
Pin, wrench parts ......................................................... 1.9
Pipe Cutter Wheel........................................................ 3.7
Pipe Cutters.................................................................. 3.2
Pipe Die ...................................................................... 4.28
Pipe Extractors ............................................................. 3.8
Pipe Freezers ................................................................ 9.4
Pipe Reamers ............................................................... 3.8
Pipe Stands .................................................................. 2.4
Pipe Taps: Hand Use Only ............................................ 3.8
Pipe Thawers................................................................ 9.5
Pipe Vises..................................................................... 2.2
Pipe Vises & Supports.................................................. 2.2
Pipe Welding Vises ...................................................... 2.3
Pipe/Tube Cutting & Preparation ............................... 3.10
Plastic Pipe Cutters.................................................... 3.19
Pliers............................................................................. 7.9
Plumber Kit................................................................... 6.4
Plumbing Locating.................................................... 11.34
Portable Chain and Yoke Vises .................................... 2.3
Portable TRISTAND Vise............................................ 4.13
Portable TRISTAND®Vise.......................................... 4.14
Portable TRISTAND®Vises .......................................... 2.2
Power Drive (Only) Case, & Support Arm .................. 4.13
Power Drive 1/2" - 2" NPT Die Heads, Case, & Support
Arm............................................................................. 4.14
Power Drive Only W/ Case and Support Arm .............. 4.14
Power Drive w/ 1/2"–1
1/4" NPT 11R Die Heads, Case &
Support Arm ............................................................... 4.13
Power Pipe Cutters..................................................... 3.10
Power Spin with AUTOFEED®.................................... 12.8
14.3
INDEX
Power Threading ........................................................ 4.15
Power Threading Machines....................................... 4.16
Power-Driven 916 Roll Groover.................................... 5.5
Precision Ratcheting Flare Tool.................................... 8.6
Press Jaws ................................................................. 10.7
Press Rings............................................................... 10.10
Press Snap™Soil Pipe Cutter ................................... 10.13
Press Tools ............................................................... 10.12
Pressure Test Pumps .................................................... 9.2
Pressure Wash (Gun only)........................................ 12.38
Pressure Wash Package, Electric Jetters................ 12.38
Professional Portable Air Mover.............................. 13.18
PTEC Plastic Drain Pipe Cutter................................... 3.20
Pump Accessories .................................................... 12.55
Pumps....................................................................... 12.44
Q
Quick Connect Pump ................................................ 13.18
Quick-Acting CSST Cutter.......................................... 3.17
Quick-Acting Tubing Cutters ...................................... 3.16
R
RapidGrip®Wrenches.................................................. 1.2
Raprench®Wrenches................................................... 1.4
Ratchet & Handle Only................................................. 4.3
Ratchet Cutters with Ergonomic Grips....................... 3.19
Ratcheting Ring.......................................................... 4.14
RBSU25 Battery Backup System.............................. 12.50
Reamers, Deburring Tools.......................................... 3.22
Reamers, Extractors & Taps......................................... 3.8
Receding Geared Threaders....................................... 4.10
Reciprocating Saw Blades........................................... 6.6
Reels & Cameras...................................................... 11.10
Remote Transmitter (512 Hz Sonde) ........................ 11.37
Replacement Drill Guides .......................................... 7.15
Retrieving Auger ...................................................... 12.17
RIDGID Hammers ......................................................... 7.5
RIDGID Hydraulic Benders -
Formers & Accessories ................................................ 8.8
RIDGID Leather Drain Cleaning Gloves.................... 12.38
RIDGID PVC Drain Cleaning Gloves ......................... 12.38
RIDGID Thread Sealants ............................................ 4.11
RIDGID®CrossChek™Inspection System ................. 11.14
Rings for ProPress®.................................................. 10.10
Rodder Machines ..................................................... 12.36
Roll Grooving................................................................ 5.3
Roller Head Pipe Stands .............................................. 2.4
RP 200-B Press Tool ................................................... 10.4
RP 210-B Press Tool ................................................... 10.5
RP 340 Press Tool....................................................... 10.6
RS33 – 1/3HP sump Pump system........................... 12.45
RS50AT Submersible Sump Pump System .............. 12.44
RSM33 Battery Backup System
with Advance Notification ....................................... 12.51
RT-100 Electric Soldering Gun ..................................... 9.3
RT-175 Electric Soldering Gun ..................................... 9.3
RT1000 Tapping Tool.................................................... 6.8
RT3422 Tapping Tool.................................................... 6.9
RW50AT Sewage Pump System with
AdvanTEXT™Cellular Monitoring............................. 12.48
Rw50v – HP sewage Pump system........................ 12.49
S
Saws........................................................................... 3.11
Screw Extractors ........................................................ 7.14
Screw Feed Tubing Cutters ........................................ 3.17
Screwdrivers ................................................................ 7.8
Sectional Machines ................................................. 12.26
SeekTech Inductive Signal Clamp............................ 11.33
SeekTech SR-20 Locator .......................................... 11.30
SeekTech SR-60 Locator .......................................... 11.31
SeekTech ST-305 Line Transmitter........................... 11.33
SeekTech ST-33QR Line Transmitter........................ 11.32
SeekTech ST-510 Line Transmitter........................... 11.33
SeeSnake Compact2 (Reel Only)................................ 11.1
SeeSnake Compact2 System..................................... 11.1
SeeSnake Compact2 System w/1
Battery and 1 Charger................................................ 11.1
SeeSnake Monitor Side Plate Upgrade Kit................ 11.1
SeeSnake®Compact Camera .................................. 11.10
SeeSnake®CS10 Digital Recording Monitor........... 11.16
SeeSnake®CS6 Digital Recording Monitor............. 11.18
SeeSnake®Digital Laptop Interface........................ 11.19
SeeSnake®DVDPak2 Inspection Camera Monitor 11.15
SeeSnake®MAX rM200 Camera System.................. 11.9
SeeSnake®microDrain™Video Inspection System.................11.11
SeeSnake®microReel Video Inspection System................11.12
SeeSnake®Mini Video Inspection System................ 11.6
SeeSnake®nanoReel Industrial
Video Inspection System.......................................... 11.13
SeeSnake®Self-Leveling Camera ............................. 11.8
SeeSnake®Standard Camera.................................... 11.7
Semi-Trash Pumps.................................................... 12.53
Sewage & Sump Pump Alert Systems..................... 12.54
Sewage and Effluent Pumps.................................... 12.46
Sewer Tape ................................................................ 12.7
Shovels....................................................................... 7.13
Single Stroke Cutters................................................. 3.19
Sink Machines.......................................................... 12.10
Sizing Tools ................................................................ 3.21
Snips............................................................................. 7.9
Soil Pipe Cutters........................................................... 3.4
Soldering Guns............................................................. 9.3
Specific Purpose Wrenches ......................................... 1.4
Sring-Type Tube Benders ............................................. 8.4
Spud Wrenches............................................................ 1.5
Stainless Steel Tubing Cutters................................... 3.17
Stand Chain Vise.......................................................... 2.2
Standard Series Jaws for ProPress®System............... 10.8
Standard Series Jaws for PureFlow™System .................10.9
Standard Series Press Jaws...................................... 10.8
Standard Series ProPress®XL-C™Rings.................... 10.9
Straight Aluminum Handle Assembly.......................... 1.9
Straight Iron Handle Assembly.................................... 1.9
Straight Pipe Wrenches............................................... 1.2
Strap Wrenches ........................................................... 1.6
Sump Pumps............................................................. 12.44
Swaging Tools.............................................................. 8.5
T
Tape Measures............................................................. 7.8
Tapping Tools ............................................................... 6.8
Test and Measurement ............................................ 11.24
Thin-Wall Conduit Benders.......................................... 8.4
Thread Cutting Oil...................................................... 4.12
Threader Stands......................................................... 4.24
Threading ................................................................... 4.10
Threading Accessories............................................... 4.11
Three-Way Pipe Threaders .......................................... 4.4
Toilet Augers .............................................................. 12.6
Tool Boxes .................................................................... 7.7
Tool Set .................................................................... 12.15
Torque Wrenches ......................................................... 3.6
Tube Benders................................................................ 8.3
Tube Expanders ............................................................ 8.5
Tube Repair & Joining.................................................. 9.2
Tubing Cutter Wheel .................................................. 3.18
Tubing Cutters ............................................................ 3.14
Twist Drills ................................................................. 7.15
U
Utility Locating ......................................................... 11.30
Utility Pump Hose Kits ............................................. 12.53
Utility Pumps ............................................................ 12.51
Utility Transfer Pump................................................ 12.54
V
V Head Pipe Stands...................................................... 2.4
Vises............................................................................. 7.2
W
Wash Wand Hose 1/2" x 35'' .................................... 12.38
Water Jetting Machines.......................................... 12.38
Wet / Dry Vacs......................................................... 13.10
Wet Application Filter.............................................. 13.16
Wide-Roll Pipe Cutter .................................................. 3.3
Winterizing Kit ......................................................... 12.38
Wrenches..................................................................... 1.2
X
XD PRO Effluent Pumps............................................ 12.46
XD PRO Sewage Pumps........................................... 12.47
XD PRO Submersible Sump Pumps.......................... 12.44
XF45 and XF50 Quick Acting Vises .............................. 7.3
INDEX
14.4
Model Number Index
Model
No.
Page
No.
00-R............................ 4.3
00-RB.......................... 4.3
00-RB.......................... 4.4
1.................................. 1.6
1................................ 7.14
1................................ 7.15
2.................................. 1.6
2.................................. 3.8
2................................ 7.14
2................................ 7.15
2-A.............................. 3.2
2P................................ 1.6
2-S.............................. 3.8
3.................................. 3.8
3................................ 7.14
3................................ 7.15
3-S.............................. 3.2
4................................ 7.14
4................................ 7.15
#4.............................. 4.12
4-S.............................. 3.2
4U............................. 4.19
4U............................. 4.25
5.................................. 1.6
5................................ 7.14
5................................ 7.15
5.................................. 7.3
5P................................ 1.6
6.................................. 1.2
6................................ 7.14
6................................ 7.15
6-S.............................. 3.2
6U............................. 4.19
6U............................. 4.25
7................................ 7.14
7................................ 7.15
7.................................. 8.5
8.................................. 1.2
8................................ 7.14
8................................ 7.15
8.................................. 8.5
9.................................. 7.3
10................................ 1.2
10................................ 1.4
10.............................. 3.17
10.............................. 7.14
11-R............................ 4.3
12................................ 1.2
12................................ 7.3
12................................ 7.5
12-R............................ 4.3
14................................ 1.2
14................................ 1.3
14................................ 1.4
15.............................. 3.17
15-SI......................... 3.17
16................................ 7.5
17................................ 1.4
18................................ 1.2
18................................ 1.3
18................................ 1.4
20.............................. 3.17
21................................ 2.3
23................................ 2.3
24................................ 1.2
24................................ 1.4
24................................ 7.5
25................................ 1.4
25................................ 2.3
25.............................. 7.15
27................................ 2.3
30.............................. 3.17
31-A BSPT .................. 4.4
31-A NPSM ................ 4.4
31-A NPT.................... 4.4
32.............................. 4.16
32................................ 5.8
32................................ 7.5
35S ........................... 3.17
36................................ 1.2
36.............................. 7.15
39................................ 2.3
40-A............................ 2.2
42-A............................ 3.3
44-S............................ 3.3
46................................ 2.5
46.............................. 4.10
48................................ 1.2
60................................ 1.2
65R-C.......................... 4.8
65R-TC........................ 4.8
65S ........................... 3.17
72.............................. 3.22
73.............................. 3.22
74.............................. 3.22
80................................ 3.8
81................................ 3.8
82................................ 3.8
83................................ 3.8
84................................ 3.8
85................................ 3.8
86................................ 3.8
87................................ 3.8
87.............................. 7.12
89................................ 3.8
92................................ 2.5
100A......................... 4.19
100A......................... 4.21
100A......................... 4.23
100A......................... 4.24
100A......................... 4.27
101............................ 3.14
103............................ 3.14
104............................ 3.14
106............................ 3.17
108............................ 3.17
109............................ 3.17
109-P ........................ 3.17
111-R.......................... 4.3
116.............................. 7.5
117............................ 3.14
118............................ 3.14
118............................ 3.15
120.............................. 7.5
122............................ 3.12
122SS....................... 3.12
122SS....................... 3.13
122SS....................... 3.18
122XL........................ 3.13
127............................ 3.22
127S ......................... 3.22
141............................ 4.10
150............................ 3.15
150A......................... 4.19
150A......................... 4.21
150A......................... 4.23
150A......................... 4.24
150A......................... 4.27
150-L......................... 3.15
150-LS ...................... 3.15
151............................ 3.16
151 CSST.................. 3.17
151-ML..................... 3.16
151-P ........................ 3.16
152............................ 3.16
152-P ........................ 3.16
153............................ 3.16
153-P ........................ 3.16
154............................ 3.16
154-P ........................ 3.16
156............................ 3.16
156-P ........................ 3.16
161............................ 4.10
170............................ 7.13
170FG ....................... 7.13
171............................ 7.13
171FG ....................... 7.13
172............................ 7.13
173............................ 7.13
176............................ 7.13
200A......................... 4.19
200A......................... 4.21
200A......................... 4.23
200A......................... 4.24
200A......................... 4.27
202.............................. 3.3
205............................ 3.16
205S ......................... 3.16
206.............................. 3.4
212.............................. 7.6
216.............................. 7.5
220.............................. 7.5
223S ......................... 3.22
226.............................. 3.4
227S ......................... 3.22
228.............................. 3.6
238-P .......................... 3.5
246.............................. 3.5
250............................ 4.23
250............................ 4.24
250.............................. 7.5
254.............................. 3.8
258.............................. 3.9
258PS ....................... 3.10
258PS ......................... 3.9
258-XL ...................... 3.10
276.............................. 3.6
300A Complete......... 4.17
300 Compact ............ 4.23
300 Compact Kit....... 4.23
300 Complete........... 4.17
300 Only ................... 4.16
300 Only ..................... 5.4
301A......................... 3.12
301A......................... 3.13
303.............................. 7.5
310M.......................... 8.2
311............................ 4.16
312............................ 4.16
312.............................. 8.2
312M.......................... 8.2
314M.......................... 8.2
315M.......................... 8.2
318M.......................... 8.2
341............................ 4.16
341............................ 4.19
341............................ 4.21
342.............................. 1.8
345.............................. 8.6
345-DL........................ 8.6
346............................ 4.10
358.............................. 8.3
360............................ 4.16
368.............................. 8.3
375.............................. 8.7
378.............................. 8.3
395.............................. 7.4
400 UM....................... 7.4
402............................ 4.12
403.............................. 8.2
404.............................. 8.2
406.............................. 8.2
406M.......................... 8.2
408.............................. 8.2
410M.......................... 8.2
412M.......................... 8.2
418............................ 4.12
418............................ 4.13
418............................ 4.14
418............................ 4.15
418............................ 4.16
419............................ 4.27
424-CI......................... 3.3
424-S.......................... 3.3
425.............................. 2.2
425............................ 4.13
425............................ 4.14
425.............................. 5.4
445R ........................... 8.6
454-W......................... 8.7
455.............................. 8.7
456.............................. 8.3
456R ........................... 8.6
458R ........................... 8.6
460............................ 4.13
461.............................. 2.3
462.............................. 2.3
463.............................. 2.3
464.............................. 2.3
466-CI......................... 3.3
466-D.......................... 3.3
466-HWS.................... 3.3
466-S.......................... 3.3
468-CI......................... 3.3
468-HWS.................... 3.3
468-S.......................... 3.3
472-CI......................... 3.3
472-HWS.................... 3.3
472-S.......................... 3.3
500A......................... 4.25
500RSS................... 12.45
500 UM....................... 7.4
531............................ 4.19
531............................ 4.22
531............................ 4.23
531............................ 4.25
532............................ 4.19
532............................ 4.23
532............................ 4.25
535............................ 4.21
535A......................... 4.10
535A......................... 4.19
541............................ 4.27
542............................ 4.27
555............................ 4.25
560.............................. 2.2
562.............................. 8.5
563.............................. 8.5
564.............................. 8.5
565.............................. 8.5
570.............................. 8.5
575............................ 3.21
600-I ......................... 4.13
602............................ 4.13
603.............................. 8.3
604.............................. 8.3
606.............................. 7.7
606.............................. 8.3
606M.......................... 8.3
608.............................. 8.3
610M.......................... 8.3
612M.......................... 8.3
614............................ 3.11
616.............................. 7.8
625.............................. 7.8
640.............................. 2.3
690-I ......................... 4.14
692............................ 4.14
700............................ 4.15
707.............................. 7.9
709.............................. 7.9
711............................ 4.27
713............................ 4.27
713.............................. 7.9
714............................ 4.27
716.............................. 7.9
724.............................. 7.4
725............................ 4.27
734.............................. 7.9
744............................ 4.27
756.............................. 1.6
758.............................. 1.6
758............................ 4.10
760.............................. 1.6
762.............................. 1.6
764............................ 4.27
765.............................. 1.6
766............................ 4.27
768.............................. 1.6
768............................ 4.10
768............................ 4.21
770............................ 4.15
771............................ 4.15
772............................ 4.15
773............................ 4.15
774.............................. 1.6
774............................ 4.15
775............................ 4.15
786.............................. 7.9
787.............................. 7.9
788.............................. 7.9
796.............................. 7.9
797.............................. 7.9
800 LMI ...................... 7.4
810.............................. 1.2
811A......................... 4.16
811A......................... 4.19
811A......................... 4.23
811A......................... 4.25
812.............................. 1.2
814.............................. 1.2
815A......................... 4.16
815A......................... 4.19
815A......................... 4.23
815A......................... 4.25
816............................ 4.19
816............................ 4.21
816............................ 4.22
816............................ 4.23
816............................ 4.25
817............................ 4.19
817............................ 4.21
817............................ 4.22
817............................ 4.23
817............................ 4.25
818.............................. 1.2
819............................ 4.16
819............................ 4.19
819............................ 4.21
819............................ 4.23
819............................ 4.27
819............................ 4.31
820............................ 4.19
820............................ 4.21
824.............................. 1.2
836.............................. 1.2
839............................ 4.19
839............................ 4.31
840A......................... 4.10
840A......................... 4.27
842............................ 4.19
842............................ 4.25
844............................ 4.10
844............................ 4.21
848.............................. 1.2
856............................ 4.19
856............................ 4.25
880.............................. 3.8
881.............................. 3.8
882.............................. 3.8
883.............................. 3.8
902.............................. 3.6
904.............................. 3.6
911............................ 4.27
911.............................. 5.6
912.............................. 5.6
913............................ 4.27
914............................ 4.27
914.............................. 5.6
915.............................. 5.3
915.............................. 5.6
916.............................. 5.5
918-I ........................... 5.7
918 only...................... 5.6
920.............................. 5.8
921............................ 7.15
965.............................. 2.5
975.............................. 5.4
979.............................. 6.6
1017............................ 1.7
1019............................ 1.7
1021.......................... 7.15
1121.......................... 7.15
1203.......................... 4.22
1205............................ 7.6
1206.......................... 3.13
1206.......................... 4.16
1206............................ 5.4
1215.......................... 4.22
1218-BM..................... 7.6
1219.......................... 4.22
1219.......................... 4.31
1221.......................... 7.15
1224.......................... 4.26
1224-BM..................... 7.6
1248............................ 6.4
1249............................ 6.4
1250............................ 6.4
1321.......................... 7.15
1380.......................... 7.12
1406.......................... 4.24
1421.......................... 7.15
1450............................ 9.2
1452.......................... 4.16
1521.......................... 7.15
1602............................ 7.7
14.5
INDEX
1619............................ 7.7
1619F.......................... 7.7
1620............................ 7.7
1621.......................... 7.15
1721.......................... 7.15
1821.......................... 7.15
1974............................ 7.8
2002............................ 1.8
2006............................ 1.7
2191.......................... 3.12
2191.......................... 3.13
3215............................ 1.6
3229............................ 1.6
3231............................ 1.6
3233............................ 1.6
3235............................ 1.6
3237............................ 1.6
4100.......................... 3.21
460-6 .......................... 2.2
460-6 ........................ 4.14
460-6 .......................... 5.4
8R111S..................... 7.10
918-1 .......................... 5.6
918-2 .......................... 5.6
918-4 .......................... 5.6
918-5 .......................... 5.6
1205-2 ........................ 7.6
460-12 ........................ 2.2
460-12 ........................ 5.4
67332...................... 12.39
310/316M................... 8.2
345/150...................... 8.6
345/150DL.................. 8.6
405/408M................... 8.2
57028-RDG1........... 12.55
605/608M................... 8.3
66005-RDG1........... 12.55
66038-RDG1........... 12.55
832068.................... 13.14
832069.................... 13.14
832077.................... 13.14
832078.................... 13.14
832079.................... 13.14
832080.................... 13.14
206/226/276............... 3.4
206/226/276............... 3.6
A3800 PF ................ 12.17
A-1.......................... 12.27
A-1.......................... 12.29
A-1.......................... 12.31
A-1.......................... 12.33
A-1.......................... 12.35
A-1.......................... 12.37
A-1HD..................... 12.31
A-1HD..................... 12.33
A-2.......................... 12.27
A-2.......................... 12.29
A-2.......................... 12.31
A-2.......................... 12.33
A-2.......................... 12.35
A-2.......................... 12.37
A-2HD..................... 12.31
A-2HD..................... 12.33
A-3.......................... 12.21
A-3.......................... 12.23
A-3.......................... 12.25
A-3.......................... 12.29
A-3.......................... 12.31
A-3.......................... 12.33
A-3.......................... 12.35
A-3.......................... 12.37
A-4.......................... 12.31
A-4.......................... 12.33
A-4.......................... 12.35
A-5.......................... 12.29
A-8.......................... 12.29
A-8.......................... 12.31
A-8.......................... 12.33
A-8.......................... 12.35
A-9.......................... 12.31
A-9.......................... 12.33
A-9.......................... 12.35
A-10........................ 12.27
A-10........................ 12.29
A-12........................ 12.17
A-12........................ 12.29
A-12........................ 12.31
A-12........................ 12.33
A-12........................ 12.35
A-12........................ 12.37
A-13........................ 12.15
A-13........................ 12.17
A-13........................ 12.27
A-13........................ 12.29
A-17........................ 12.31
A-17........................ 12.33
A-17........................ 12.35
A-17-A.................... 12.27
A-17-B .................... 12.27
A-17-C .................... 12.27
A-17-D.................... 12.27
A-17-E..................... 12.27
A-18........................ 12.27
A-20........................ 12.31
A-20........................ 12.33
A-20........................ 12.35
A-25........................ 12.29
A-30........................ 12.27
A-30........................ 12.29
A-30TW.................. 12.27
A-35........................ 12.29
A-36........................ 12.29
A-39AF.................... 12.11
A-39AF.................... 12.13
A-40........................ 12.27
A-40AF.................... 12.11
A-40B...................... 12.11
A-40G ..................... 12.11
A-61........................ 12.29
A-61........................ 12.31
A-61........................ 12.33
A-62........................ 12.29
A-62........................ 12.31
A-62........................ 12.33
A-75........................ 12.21
A-75........................ 12.25
A-75DR................... 12.23
A-75PF.................... 12.21
A-75PF.................... 12.23
A-75PF.................... 12.25
A-14-6..................... 12.27
A-368X.................... 12.31
A-368X.................... 12.33
A-369X.................... 12.31
A-369X.................... 12.33
A-369X.................... 12.35
A-380...................... 12.17
A-381...................... 12.17
A-381-A.................. 12.17
A-14-10................... 12.27
A-2474.................... 12.37
A-2475.................... 12.37
A-2476.................... 12.37
A-2704.................... 12.37
A-3179.................... 12.27
A-34-10................... 12.31
A-34-10................... 12.33
A-34-10................... 12.35
A-34-12................... 12.31
A-34-12................... 12.33
A-34-12................... 12.35
A-34-16................... 12.31
A-34-16................... 12.33
A-34-16................... 12.35
A-60-12................... 12.29
A-60-16................... 12.29
A-6582.................... 12.21
A-6582.................... 12.23
A-6582.................... 12.25
A-6583.................... 12.21
A-6583.................... 12.23
A-6583.................... 12.25
A-7534.................... 12.21
A-7534.................... 12.25
A-7534D ................. 12.23
A-7558.................... 12.21
A-7558.................... 12.25
A-7558D ................. 12.23
A-7570.................... 12.21
A-7570.................... 12.23
A-7570.................... 12.25
A-7571.................... 12.21
A-7571.................... 12.23
A-7571.................... 12.25
AM2560.................. 13.18
AR99........................... 2.5
Auto-Clean ............... 12.9
B-171-X..................... 4.15
B-1677........................ 8.4
B-1678........................ 8.4
B-1679........................ 8.4
B-1709........................ 8.4
B-1711........................ 8.4
B-1712........................ 8.4
B-3542.................... 12.37
B-6840.................... 12.21
B-6840.................... 12.23
B-6840.................... 12.25
B-6841.................... 12.21
B-6841.................... 12.23
B-6841.................... 12.25
BC2A........................... 2.2
BC4A........................... 2.2
BC210......................... 2.2
BC210P....................... 2.2
BC410......................... 2.2
BC410P....................... 2.2
BC510......................... 2.2
BC610......................... 2.2
BC810......................... 2.2
BTH-9.......................... 2.4
C1 ........................... 10.10
C-1.......................... 12.11
C-1.......................... 12.13
C-1.......................... 12.27
C-1IC....................... 12.11
C-1IC....................... 12.13
C-1IC....................... 12.17
C-1IC....................... 12.27
C-2.......................... 12.11
C-2.......................... 12.13
C-2.......................... 12.27
C-2IC....................... 12.11
C-2IC....................... 12.13
C-2IC....................... 12.17
C-2IC....................... 12.27
C-4.......................... 12.11
C-4.......................... 12.13
C-4.......................... 12.27
C-5.......................... 12.11
C-5.......................... 12.13
C-5.......................... 12.27
C-6.......................... 12.11
C-6.......................... 12.13
C-6.......................... 12.27
C-6IC....................... 12.11
C-6IC....................... 12.13
C-6IC....................... 12.27
C-7.......................... 12.27
C-7.......................... 12.29
C-8.......................... 12.27
C-8.......................... 12.29
C-8PC...................... 12.27
C-9.......................... 12.15
C-9.......................... 12.27
C-9.......................... 12.29
C-10........................ 12.29
C-10........................ 12.31
C-10........................ 12.33
C-10........................ 12.35
C-10 IC.................... 12.29
C-10 IC.................... 12.31
C-10 IC.................... 12.33
C-10 IC.................... 12.35
C-11........................ 12.31
C-11........................ 12.33
C-11........................ 12.35
C-11IC..................... 12.29
C-11IC..................... 12.35
C-12............................ 1.5
C-12........................ 12.31
C-12........................ 12.33
C-12........................ 12.35
C-13IC..................... 12.11
C-13IC..................... 12.13
C-13IC..................... 12.17
C-13ICSB ................ 12.11
C-14............................ 1.5
C-14........................ 12.31
C-14........................ 12.33
C-14........................ 12.35
C-15........................ 12.31
C-15........................ 12.33
C-15........................ 12.35
C-18............................ 1.5
C-21........................ 12.11
C-21........................ 12.13
C-21........................ 12.27
C-22........................ 12.11
C-22........................ 12.13
C-22........................ 12.27
C-23IC..................... 12.11
C-23IC..................... 12.13
C-23IC..................... 12.17
C-24............................ 1.5
C-24........................ 12.19
C-24........................ 12.21
C-24........................ 12.23
C-24........................ 12.24
C-24........................ 12.27
C-24HC ................... 12.19
C-24HC ................... 12.21
C-24HC ................... 12.23
C-24HC ................... 12.25
C-24HC ................... 12.27
C-24 HD.................. 12.19
C-24 HD.................. 12.27
C-25........................ 12.19
C-25........................ 12.21
C-25........................ 12.23
C-25........................ 12.24
C-25........................ 12.27
C-25 HD.................. 12.19
C-25 HD.................. 12.27
C-26........................ 12.19
C-26........................ 12.21
C-26........................ 12.23
C-26........................ 12.24
C-26........................ 12.27
C-26 HD.................. 12.19
C-26 HD.................. 12.27
C-27........................ 12.19
C-27........................ 12.21
C-27........................ 12.23
C-27........................ 12.24
C-27........................ 12.27
C-27HC ................... 12.19
C-27HC ................... 12.21
C-27HC ................... 12.23
C-27HC ................... 12.25
C-27HC ................... 12.27
C-27 HD.................. 12.19
C-27 HD.................. 12.27
C-28........................ 12.21
C-28........................ 12.23
C-28........................ 12.24
C-29........................ 12.21
C-29........................ 12.23
C-29........................ 12.24
C-31........................ 12.17
C-31IW ................... 12.15
C-31IW ................... 12.17
C-32........................ 12.17
C-32IW ................... 12.15
C-32IW ................... 12.17
C-33........................ 12.17
C-33IW ................... 12.15
C-33IW ................... 12.17
C-36............................ 1.5
C-44........................ 12.17
C-44IW ................... 12.15
C-44IW ................... 12.17
C-45........................ 12.17
C-45HC ................... 12.17
C-45IW ................... 12.15
C-45IW ................... 12.17
C-46........................ 12.17
C-75........................ 12.21
C-75........................ 12.23
C-75........................ 12.24
C-75HC ................... 12.21
C-75HC ................... 12.23
C-75HC ................... 12.25
C-100...................... 12.21
C-100...................... 12.23
C-100...................... 12.24
C-100HC ................. 12.21
C-100HC ................. 12.23
C-100HC ................. 12.25
C-6429.................... 12.13
CD-100 RS.............. 11.27
CJ-99.......................... 2.4
CS6......................... 11.18
D-380-X .................... 4.31
D-969.......................... 6.4
D-980.......................... 6.6
D-981.......................... 6.6
D-984.......................... 6.6
D-985.......................... 6.6
D-986.......................... 6.6
D-987.......................... 6.6
D-988.......................... 6.6
D-989.......................... 6.6
D-990.......................... 6.6
D-992.......................... 6.6
D-993.......................... 6.6
D-994.......................... 6.6
D-1375........................ 8.4
D-1376........................ 8.4
D-1377........................ 8.4
D-1378........................ 8.4
D-1379........................ 8.4
D-1380........................ 8.4
D-1381........................ 8.4
D-1382........................ 8.4
D-1440...................... 4.10
DDP-986 ..................... 6.6
DP-985........................ 6.6
E258-T ...................... 3.10
E258-T ........................ 3.9
E635.......................... 3.17
E-6 .............................. 1.3
E-8 .............................. 1.3
E-10 ............................ 1.3
E-12 ............................ 1.3
E-14 ............................ 1.3
E-18 ............................ 1.3
E-24 ............................ 1.3
E-36 ............................ 1.3
E-37 ............................ 8.7
E-45 ............................ 8.7
E-46 ............................ 8.7
E-47 ............................ 8.7
E-52 ............................ 8.7
E-61 ............................ 8.7
E-63 ............................ 8.7
E-64 ............................ 8.7
E-109 .......................... 3.7
E-110 .......................... 1.4
E-258 ........................ 3.10
E-258 .......................... 3.9
E-635 ........................ 3.18
E-702 ........................ 3.18
E-729 ........................ 4.31
E-730 ........................ 4.31
E-730-B..................... 4.31
E-731 ........................ 4.31
E-731-B..................... 4.31
E-732 ........................ 4.31
E-732-B..................... 4.31
E-733 ........................ 4.31
E-733-B..................... 4.31
E-734 ........................ 4.31
E-734-B..................... 4.31
E-735 ........................ 4.31
E-735-B..................... 4.31
E-736-B..................... 4.31
E-863 ........................ 4.16
E-910 .......................... 1.3
E-914 .......................... 1.3
E-918 .......................... 1.3
E-924 .......................... 1.3
E-1032 ........................ 3.7
E-1032S...................... 3.7
E-1240 ...................... 3.18
E-1525 ...................... 3.18
Model Number Index
Model
No.
Page
No.
INDEX
14.6
E-1740 ...................... 3.18
E-1962 ........................ 3.7
E-2155 ...................... 3.18
E-2156 ...................... 3.18
E-2157 ...................... 3.18
E-2191 ...................... 3.18
E-2267 ........................ 3.7
E-2558 ...................... 3.18
E-2632 ........................ 3.7
E-2724 ...................... 12.7
E-2725 ...................... 12.7
E-2726 ...................... 12.7
E-2727 ...................... 12.7
E-2729 ...................... 12.7
E-2731 ...................... 12.7
E-2737 ...................... 12.7
E-2739 ...................... 12.7
E-2741 ...................... 12.7
E-2743 ...................... 12.7
E-2880 ...................... 3.18
E-2990 ...................... 3.18
E-3186 ........................ 3.7
E-3469 ...................... 3.18
E-3495 ...................... 3.18
E-4266 ........................ 3.7
E-4546 ...................... 3.18
E-4695 ...................... 7.12
E-5112 ........................ 3.8
E-5113 ........................ 3.8
E-5114 ........................ 3.8
E-5115 ........................ 3.8
E-5116 ........................ 3.8
E-5117 ........................ 3.8
E-5118 ........................ 3.8
E-5119 ........................ 3.8
E-5120 ........................ 3.8
E-5272 ...................... 3.18
E-5299 ...................... 3.18
E-5732 ........................ 8.4
E-5734 ........................ 8.4
E-10279 .................... 3.18
F-3............................... 3.7
F-3S ............................ 3.7
F-10............................. 7.4
F-45............................. 7.2
F-50............................. 7.2
F-60............................. 7.2
F-119........................... 3.7
F-158......................... 3.18
F-229........................... 3.7
F-229S ........................ 3.7
F-366........................... 3.7
F-367........................... 3.7
F-367-S....................... 3.7
F-383........................... 3.7
F-514........................... 3.7
F-515........................... 3.7
F-546........................... 3.7
F-50 & F-60......... 7.2
FC-150 ...................... 3.21
FC-200 ...................... 3.21
FV-1 ........................ 12.41
FV-1 ........................ 12.43
H-5.......................... 12.38
H-5.......................... 12.39
H-5.......................... 12.41
H-5.......................... 12.43
H-10........................ 12.38
H-10........................ 12.39
H-10 WH................. 12.38
H-10 WH................. 12.39
H-18.......................... 7.10
H-21........................ 12.38
H-21........................ 12.39
H-21........................ 12.41
H-21........................ 12.43
H-22........................ 12.38
H-24........................ 12.38
H-25........................ 12.38
H-25........................ 12.39
H-25........................ 12.41
H-25........................ 12.43
H-30........................ 12.38
H-30........................ 12.39
H-30........................ 12.41
H-30A ..................... 12.38
H-30 WH................. 12.39
H-30 WH................. 12.41
H-31........................ 12.38
H-32........................ 12.38
H-32........................ 12.39
H-32........................ 12.41
H-32........................ 12.43
H-38........................ 12.43
H-38 WH................. 12.43
H-41........................ 12.39
H-42........................ 12.39
H-44........................ 12.39
H-45........................ 12.39
H-51........................ 12.39
H-52........................ 12.39
H-61........................ 12.40
H-62........................ 12.40
H-64........................ 12.40
H-65........................ 12.40
H-71........................ 12.40
H-72........................ 12.40
H-75........................ 12.40
H-101...................... 12.42
H-102...................... 12.42
H-104...................... 12.42
H-105...................... 12.42
H-111...................... 12.42
H-112...................... 12.42
H-115...................... 12.42
H-1211.................... 12.38
H-1211.................... 12.39
H-1211.................... 12.41
H-1215.................... 12.38
H-1215.................... 12.39
H-1215.................... 12.41
H-1220.................... 12.38
H-1220.................... 12.39
H-1220.................... 12.41
H-1235.................... 12.38
H-1235.................... 12.39
H-1250.................... 12.38
H-1250.................... 12.39
H-1250.................... 12.41
H-1275.................... 12.41
H-1400.................... 12.38
H-1400.................... 12.39
H-1400.................... 12.41
H-1400.................... 12.43
H-1415.................... 12.38
H-1415.................... 12.39
H-1415.................... 12.41
H-1415.................... 12.43
H-1435.................... 12.38
H-1435.................... 12.39
H-1435.................... 12.41
H-1435.................... 12.43
H-1450.................... 12.38
H-1450.................... 12.39
H-1450.................... 12.41
H-1450.................... 12.43
H-1475.................... 12.38
H-1475.................... 12.39
H-1475.................... 12.41
H-1475.................... 12.43
H-1825.................... 12.38
H-1825.................... 12.39
H-1850.................... 12.38
H-1850.................... 12.39
H-3810.................... 12.43
H-3815.................... 12.43
H-3820.................... 12.43
H-3830.................... 12.43
H-3850.................... 12.43
HB382......................... 8.7
HB383......................... 8.7
HC300......................... 6.2
HC300-J...................... 6.2
HC450......................... 6.3
HF-4........................ 12.41
HF-4........................ 12.43
HKO-186................... 7.10
HKO-1810................. 7.10
HL-1........................ 12.38
HL-1........................ 12.41
HL-1........................ 12.43
HL-2........................ 12.38
HL-2........................ 12.41
HL-2........................ 12.43
HP-22...................... 12.41
HP-EL...................... 12.38
HP-EL...................... 12.39
HW-22 .................... 12.41
HW-30 .................... 12.43
HW-EL .................... 12.38
HW-EL .................... 12.39
K-3............................ 12.6
K-5............................ 12.7
K-6............................ 12.6
K-6 DH...................... 12.6
K-10........................ 12.37
K-25-BP..................... 12.8
K-25-DH.................... 12.8
K-26.......................... 12.8
K-40........................ 12.10
K-40AF.................... 12.10
K-40B AF................. 12.10
K-45........................ 12.12
K-45AF.................... 12.12
K-50........................ 12.26
K-60SP.................... 12.28
K-60SP-SE .............. 12.28
K-75R...................... 12.24
K-45-1..................... 12.12
K-45AF-1................. 12.12
K-45-5..................... 12.12
K-45AF-5................. 12.12
K-45-7..................... 12.12
K-45AF-7................. 12.12
K-50-4..................... 12.26
K-50-6..................... 12.26
K-50-8..................... 12.26
K-50-9..................... 12.26
K-750...................... 12.20
K-1000.................... 12.36
K-1500A.................. 12.30
K-1500A Only ......... 12.32
K-1500A SE ............ 12.32
K-1500B.................. 12.30
K-1500G.................. 12.34
K-1500SP................ 12.32
K-1500SPA ............. 12.32
K-1500SPB.............. 12.32
K-3800.................... 12.16
K-6200.................... 12.18
K-6200.................... 12.19
K-7500.................... 12.22
K-400 w/C-31 IW ... 12.14
K-400 AF w/C-32 IW........
12.14
K-400 w/C-32 IW ... 12.14
K-400 w/C-44 IW ... 12.14
K-400 AF w/C-45 IW........
12.14
K-400 w/C-45 IW ... 12.14
K-750w/C-24.......... 12.20
K-750w/C-27.......... 12.20
K-750w/C-75.......... 12.20
K-1500G w/C-14..... 12.34
K-3800 w/C-31....... 12.16
K-3800 w/C-32....... 12.16
K-3800 w/C-45....... 12.16
K-3800 w/C-46....... 12.16
K-6200 w/C-24....... 12.18
K-6200 w/C-24-IW. 12.18
K-7500 w/C-24....... 12.22
K-7500 w/C-75....... 12.22
K-7500 C-100.......... 12.22
K-7500 w/C-100..... 12.22
KJ-1350.................. 12.38
KJ-1350-C............... 12.38
KJ-1750.................. 12.39
KJ-1750-C............... 12.39
KJ-2200.................. 12.40
KJ-2200-C............... 12.40
KJ-3100.................. 12.42
KJ-1350-2............... 12.38
KJ-1350-2C............. 12.38
KT-190 ........................ 9.5
KT-200 ........................ 9.5
Kwik-Spin................. 12.9
M14............................ 6.5
M16............................ 6.5
M16............................ 6.8
M16............................ 6.9
M17............................ 6.5
M19............................ 6.5
M21............................ 6.5
M22............................ 6.5
M22............................ 6.8
M22............................ 6.9
M24............................ 6.5
M25............................ 6.5
M27............................ 6.5
M29............................ 6.5
M29............................ 6.9
M30............................ 6.5
M32............................ 6.5
M33............................ 6.5
M35............................ 6.5
M35............................ 6.9
M37............................ 6.5
M38............................ 6.5
M40............................ 6.5
M41............................ 6.5
M43............................ 6.5
M44............................ 6.5
M44............................ 6.9
M46............................ 6.5
M48............................ 6.5
M51............................ 6.5
M52............................ 6.5
M54............................ 6.5
M57............................ 6.5
M59............................ 6.5
M60............................ 6.5
M64............................ 6.5
M65............................ 6.5
M67............................ 6.5
M70............................ 6.5
M73............................ 6.5
M76............................ 6.5
M79............................ 6.5
M83............................ 6.5
M86............................ 6.5
M89............................ 6.5
M92............................ 6.5
M95............................ 6.5
M98............................ 6.5
M102.......................... 6.5
M105.......................... 6.5
M108.......................... 6.5
M110.......................... 6.5
M114.......................... 6.5
M121.......................... 6.5
M127.......................... 6.5
M140.......................... 6.5
M152.......................... 6.5
MaxCore Cable......... 12.8
micro CD-100.......... 11.27
micro IR-100........... 11.24
micro LM-100......... 11.25
MJ-1......................... 4.21
PC-1250.................... 3.19
PC-1375 ML.............. 3.19
PCB-1250.................. 3.19
PCB-1375.................. 3.19
Power Spin............... 12.8
PTEC 3000 ................ 3.20
PTEC 5000 ................ 3.20
R0 ............................... 6.4
R1 ............................... 6.4
R2 ............................... 6.4
R2S............................. 6.2
R2S............................. 6.4
R3 ............................... 6.4
R4 ............................... 6.3
R4 ............................... 6.4
R735BB..................... 7.10
R737BB..................... 7.10
R739BB..................... 7.10
R-0.......................... 12.37
R-1.......................... 12.37
R-2.......................... 12.37
R-7.......................... 12.37
R-8.......................... 12.37
RAPC250................. 12.52
RBS1240................. 12.51
RBS1275................. 12.51
RBSU25 .................. 12.50
RC-1625.................... 3.19
RC-2375.................... 3.19
RCB-1625.................. 3.19
RCB-2375.................. 3.19
RE33 ....................... 12.46
RE50 ....................... 12.46
RFS ......................... 12.56
RJ624 ......................... 2.5
RJ624 ......................... 5.8
RJ-98.......................... 2.4
RJ-99.......................... 2.4
RLT33...................... 12.45
RP 200-B................... 10.4
RP 210-B................... 10.5
RR3000................... 12.42
RS33....................... 12.44
RS50....................... 12.44
RS50AT................... 12.44
RS75....................... 12.44
RSA2AT .................. 12.54
RSM33.................... 12.51
RT1000 ....................... 6.8
RT3422 ....................... 6.9
RT-100 ........................ 9.3
RT-175 ........................ 9.3
RU16H .................... 12.51
RU50K..................... 12.54
RUA25 .................... 12.52
RV2400A................. 13.13
RV2400HF............... 13.13
RV2600B................. 13.13
RW50AT ................. 12.48
RW50T.................... 12.47
RW50V ................... 12.47
RW502424................ 12.5
RW50AT2424 ......... 12.49
RWA2AT ................. 12.54
S ................................. 8.5
S14 ........................... 7.11
S18 ........................... 7.11
S24 ........................... 7.11
S30 ........................... 7.11
S36 ........................... 7.11
S42 ........................... 7.11
S-1.......................... 12.11
S-1.......................... 12.13
S-2.............................. 1.5
S-2.......................... 12.11
S-2.......................... 12.13
S-2.......................... 12.17
S-3.......................... 12.11
S-3.......................... 12.13
S-3.......................... 12.17
S-4A............................ 1.5
S-6A............................ 1.5
S-8A............................ 1.5
SF-2500 ...................... 9.4
T-1........................... 12.31
T-1........................... 12.33
T-1........................... 12.35
T-2........................... 12.31
T-2........................... 12.33
T-2........................... 12.35
T-2........................... 12.37
T-3........................... 12.31
T-3........................... 12.33
T-3........................... 12.35
T-4........................... 12.31
T-4........................... 12.33
T-4........................... 12.35
T-4........................... 12.37
T-5........................... 12.31
T-5........................... 12.33
T-5........................... 12.35
T-6........................... 12.31
T-6........................... 12.33
T-6........................... 12.35
T-7........................... 12.31
T-7........................... 12.33
T-7........................... 12.35
T-7........................... 12.37
Model Number Index
Model
No.
Page
No.
14.7
INDEX
T-8........................... 12.31
T-8........................... 12.33
T-8........................... 12.35
T-9........................... 12.31
T-9........................... 12.33
T-9........................... 12.35
T-10......................... 12.31
T-10......................... 12.33
T-10......................... 12.35
T-11......................... 12.31
T-11......................... 12.33
T-11......................... 12.35
T-12......................... 12.31
T-12......................... 12.33
T-12......................... 12.35
T-13......................... 12.31
T-13......................... 12.33
T-13......................... 12.35
T-14......................... 12.31
T-14......................... 12.35
T-15A ...................... 12.31
T-15A ...................... 12.33
T-15A ...................... 12.35
T-15B ...................... 12.31
T-15B ...................... 12.33
T-15B ...................... 12.35
T-16......................... 12.31
T-16......................... 12.33
T-16......................... 12.35
T-16......................... 12.37
T-17......................... 12.31
T-17......................... 12.33
T-17......................... 12.35
T-17......................... 12.37
T-18......................... 12.31
T-18......................... 12.33
T-18......................... 12.35
T-18......................... 12.37
T-21......................... 12.31
T-21......................... 12.33
T-21......................... 12.35
T-22......................... 12.31
T-22......................... 12.33
T-22......................... 12.35
T-23......................... 12.31
T-23......................... 12.33
T-23......................... 12.35
T-23......................... 12.37
T-24......................... 12.31
T-24......................... 12.33
T-24......................... 12.35
T-24......................... 12.37
T-25......................... 12.31
T-25......................... 12.33
T-25......................... 12.35
T-25......................... 12.37
T-26......................... 12.31
T-26......................... 12.33
T-26......................... 12.35
T-26......................... 12.37
T-26A ...................... 12.31
T-26A ...................... 12.33
T-26A ...................... 12.35
T-26A ...................... 12.37
T-27......................... 12.31
T-27......................... 12.33
T-27......................... 12.35
T-31......................... 12.31
T-31......................... 12.33
T-31......................... 12.35
T-32......................... 12.31
T-32......................... 12.33
T-32......................... 12.35
T-33......................... 12.31
T-33......................... 12.33
T-33......................... 12.35
T-38......................... 12.31
T-38......................... 12.33
T-38......................... 12.35
T-39......................... 12.31
T-39......................... 12.33
T-39......................... 12.35
T-40......................... 12.31
T-40......................... 12.33
T-40......................... 12.35
T-41......................... 12.31
T-41......................... 12.33
T-41......................... 12.35
T-42......................... 12.31
T-42......................... 12.33
T-42......................... 12.35
T-43......................... 12.31
T-43......................... 12.33
T-43......................... 12.35
T-44......................... 12.31
T-44......................... 12.33
T-44......................... 12.35
T-45......................... 12.31
T-45......................... 12.33
T-45......................... 12.35
T-46......................... 12.31
T-46......................... 12.33
T-46......................... 12.35
T-47......................... 12.31
T-47......................... 12.33
T-50......................... 12.31
T-50......................... 12.33
T-50......................... 12.35
T-101....................... 12.17
T-101....................... 12.29
T-102....................... 12.17
T-102....................... 12.29
T-103....................... 12.29
T-104....................... 12.17
T-104....................... 12.29
T-105....................... 12.17
T-105....................... 12.29
T-106....................... 12.17
T-106....................... 12.29
T-107....................... 12.17
T-107....................... 12.29
T-109....................... 12.29
T-110....................... 12.29
T-111....................... 12.29
T-112....................... 12.17
T-112....................... 12.29
T-113....................... 12.17
T-113....................... 12.29
T-114....................... 12.17
T-114....................... 12.29
T-121....................... 12.17
T-122....................... 12.17
T-125....................... 12.17
T-125....................... 12.29
T-127....................... 12.29
T-141....................... 12.17
T-141....................... 12.29
T-142....................... 12.17
T-142....................... 12.29
T-150....................... 12.29
T-201....................... 12.11
T-201....................... 12.13
T-201....................... 12.15
T-201....................... 12.17
T-201....................... 12.27
T-201A .................... 12.27
T-202....................... 12.11
T-202....................... 12.13
T-202....................... 12.15
T-202....................... 12.17
T-202....................... 12.27
T-203....................... 12.11
T-203....................... 12.13
T-203....................... 12.15
T-203....................... 12.17
T-203....................... 12.27
T-204....................... 12.11
T-204....................... 12.13
T-204....................... 12.15
T-204....................... 12.17
T-204....................... 12.27
T-205....................... 12.11
T-205....................... 12.13
T-205....................... 12.15
T-205....................... 12.17
T-205....................... 12.27
T-206....................... 12.11
T-206....................... 12.13
T-206....................... 12.15
T-206....................... 12.17
T-206....................... 12.27
T-207....................... 12.17
T-207....................... 12.27
T-208....................... 12.17
T-208....................... 12.27
T-209....................... 12.17
T-209....................... 12.27
T-210....................... 12.11
T-210....................... 12.13
T-210....................... 12.15
T-210....................... 12.17
T-210....................... 12.27
T-211....................... 12.11
T-211....................... 12.13
T-211....................... 12.15
T-211....................... 12.17
T-211....................... 12.27
T-212....................... 12.11
T-212....................... 12.13
T-212....................... 12.15
T-212....................... 12.17
T-212....................... 12.27
T-213....................... 12.11
T-213....................... 12.13
T-213....................... 12.15
T-213....................... 12.17
T-213....................... 12.27
T-214....................... 12.11
T-214....................... 12.13
T-214....................... 12.15
T-214....................... 12.17
T-214....................... 12.27
T-215....................... 12.11
T-215....................... 12.13
T-215....................... 12.15
T-215....................... 12.17
T-216....................... 12.17
T-216....................... 12.27
T-217....................... 12.11
T-217....................... 12.13
T-217....................... 12.15
T-217....................... 12.17
T-218....................... 12.27
T-219....................... 12.27
T-220....................... 12.27
T-221....................... 12.27
T-225....................... 12.11
T-225....................... 12.13
T-225....................... 12.15
T-225....................... 12.17
T-225....................... 12.27
T-230....................... 12.13
T-230....................... 12.15
T-230....................... 12.17
T-230....................... 12.27
T-231....................... 12.13
T-231....................... 12.15
T-231....................... 12.17
T-231....................... 12.27
T-232....................... 12.13
T-232....................... 12.15
T-232....................... 12.17
T-232....................... 12.27
T-240....................... 12.15
T-240....................... 12.17
T-240....................... 12.27
T-250....................... 12.11
T-250....................... 12.13
T-250....................... 12.15
T-250....................... 12.27
T-260....................... 12.15
T-260....................... 12.17
T-270....................... 12.17
T-300....................... 12.37
T-301....................... 12.37
T-302....................... 12.37
T-303....................... 12.37
T-304....................... 12.37
T-306....................... 12.37
T-307....................... 12.37
T-309....................... 12.37
T-310....................... 12.37
T-311....................... 12.37
T-312....................... 12.37
T-313....................... 12.37
T-314....................... 12.37
T-316....................... 12.37
T-317....................... 12.37
T-318....................... 12.37
T-319....................... 12.37
T-320....................... 12.37
T-321....................... 12.37
T-326....................... 12.37
T-403....................... 12.19
T-403....................... 12.21
T-403....................... 12.23
T-403....................... 12.25
T-404....................... 12.19
T-404....................... 12.21
T-404....................... 12.23
T-404....................... 12.25
T-406....................... 12.19
T-406....................... 12.21
T-406....................... 12.23
T-406....................... 12.25
T-407....................... 12.19
T-407....................... 12.21
T-407....................... 12.23
T-407....................... 12.25
T-408....................... 12.19
T-408....................... 12.21
T-408....................... 12.23
T-408....................... 12.25
T-409....................... 12.19
T-409....................... 12.21
T-409....................... 12.23
T-409....................... 12.25
T-411....................... 12.19
T-411....................... 12.21
T-411....................... 12.23
T-411....................... 12.25
T-412....................... 12.19
T-412....................... 12.21
T-412....................... 12.23
T-412....................... 12.25
T-413....................... 12.19
T-413....................... 12.21
T-413....................... 12.23
T-413....................... 12.25
T-414....................... 12.19
T-414....................... 12.21
T-414....................... 12.23
T-414....................... 12.25
T-416....................... 12.19
T-416....................... 12.21
T-416....................... 12.23
T-416....................... 12.25
T-432....................... 12.19
T-432....................... 12.23
T-433....................... 12.19
T-433....................... 12.21
T-433....................... 12.23
T-433....................... 12.25
T-434....................... 12.19
T-434....................... 12.21
T-434....................... 12.23
T-434....................... 12.25
T-436....................... 12.19
T-436....................... 12.21
T-436....................... 12.23
T-436....................... 12.25
T-458....................... 12.19
T-458....................... 12.21
T-458....................... 12.23
T-458....................... 12.25
T-458....................... 12.27
T-468....................... 12.21
T-468....................... 12.23
T-468....................... 12.25
T-50-1 ..................... 12.31
T-50-1 ..................... 12.33
T-50-1 ..................... 12.35
T-50-2 ..................... 12.31
T-50-2 ..................... 12.33
T-50-2 ..................... 12.35
T-50-3 ..................... 12.31
T-50-3 ..................... 12.33
T-50-3 ..................... 12.35
T-150-1 ................... 12.29
T-150-2 ................... 12.29
TP2HK..................... 12.53
TP3HK..................... 12.53
TP-250 .................... 12.52
TP-4000 .................. 12.53
TP-5500 .................. 12.53
V1 ........................... 10.10
V2 ........................... 10.10
V2 ............................. 10.9
V1/C1...................... 10.10
VF3501.................... 13.17
VF3502.................... 13.17
VF3503.................... 13.17
VF4000.................... 13.15
VF5000.................... 13.15
VF6000.................... 13.16
VF7000.................... 13.16
VF-99 .......................... 2.4
VF-99 .......................... 5.4
VJ-98.......................... 2.4
VP2000 ................... 13.18
VT1701 ................... 13.14
VT1702 ................... 13.14
VT1708 ................... 13.14
VT1709 ................... 13.14
VT1710 ................... 13.14
VT1711 ................... 13.14
VT 1712 .................. 13.14
VT 1714 .................. 13.14
VT 1720 .................. 13.14
VT 1755 .................. 13.14
VT1781 ................... 13.14
VT 2501 .................. 13.14
VT 2502 .................. 13.14
VT 2503 .................. 13.14
VT 2508 .................. 13.14
VT 2509 .................. 13.14
VT 2510 .................. 13.14
VT 2514 .................. 13.14
VT 2520 .................. 13.14
VT 2525 .................. 13.14
VT 2530 .................. 13.14
VT 2534 .................. 13.14
VT 2540 .................. 13.14
VT 2561 .................. 13.14
VT 2570 .................. 13.14
VT 2571 .................. 13.14
VT 2575 .................. 13.14
WD0671 ................... 13.6
WD0970 ................... 13.7
WD1270 ................... 13.8
WD1450 ................... 13.9
WD1680 ................. 13.11
WD1851 ................. 13.12
WD1956 ................. 13.10
WD3050 ................... 13.3
WD4070 ................... 13.4
WD4522 ................... 13.5
XF-45 .......................... 7.3
XF-50 .......................... 7.3
XL-C/S ...................... 10.9
Model Number Index
Model
No.
Page
No.
INDEX
14.8
Catalog Number Index
Page
No.
Catalog
No.
10251.......................... 8.5
10261.......................... 8.5
10271.......................... 8.5
10281.......................... 8.5
10291.......................... 8.5
10301.......................... 8.5
10311.......................... 8.5
10321.......................... 8.5
10341.......................... 8.5
10343........................ 3.12
10343........................ 3.13
10348.......................... 1.2
10351.......................... 8.5
10358.......................... 1.2
10361.......................... 8.5
10491........................ 4.25
10883........................ 4.12
10883........................ 4.13
10883........................ 4.14
10883........................ 4.15
10883........................ 4.16
10973........................ 3.13
12128...................... 12.15
12128...................... 12.17
12128...................... 12.27
12138........................ 4.19
12248...................... 11.10
12248........................ 11.6
12248........................ 11.7
12248........................ 11.8
12543...................... 11.34
12543...................... 11.35
12638........................ 3.13
12643........................ 3.13
12693.......................... 1.3
12698.......................... 1.3
13988........................ 11.8
13998........................ 11.8
14028........................ 11.7
14028........................ 11.8
14033........................ 11.7
14033........................ 11.8
14053........................ 11.7
14058........................ 11.7
14063........................ 11.6
14078........................ 11.7
14083...................... 11.10
14083........................ 11.6
14213........................ 7.11
14218........................ 7.11
14223........................ 7.11
14228........................ 7.11
14233........................ 7.11
14238........................ 7.11
14818...................... 11.34
14818...................... 11.35
14818...................... 11.36
14988.......................... 3.6
15071.......................... 8.5
15317.......................... 4.7
15323........................ 11.7
15323........................ 11.8
15682........................ 4.17
15722........................ 4.17
15828...................... 11.10
15828........................ 11.6
16202.......................... 7.9
16207.......................... 7.9
16473.......................... 7.9
16573.......................... 7.8
16671.......................... 6.2
16671.......................... 6.4
16703.......................... 2.2
16703........................ 4.13
16703........................ 4.14
16703.......................... 5.4
16713...................... 12.42
16723........................ 4.10
16723........................ 4.21
16728...................... 11.34
16728...................... 11.35
16728...................... 11.37
16958........................ 10.7
16963........................ 10.7
16978........................ 10.7
17003........................ 10.7
17008........................ 10.7
17013........................ 10.7
17018........................ 10.7
17558........................ 11.6
17563........................ 11.7
17563........................ 11.8
17597........................ 7.10
17602........................ 7.10
17861.......................... 9.3
18363........................ 7.11
18368........................ 7.11
18373........................ 7.11
18378........................ 7.11
18383........................ 7.11
18388........................ 7.11
18718........................ 13.9
19238...................... 11.35
19258...................... 11.37
19263...................... 11.37
19268...................... 11.37
19273...................... 11.37
19366........................ 4.10
19793...................... 11.34
19793...................... 11.35
19793...................... 11.37
19813........................ 10.7
20105........................ 4.24
20168...................... 11.34
20168...................... 11.35
20168...................... 11.36
20193...................... 11.10
20213.......................... 7.8
20218.......................... 7.8
20233.......................... 7.4
20238.......................... 7.6
20248...................... 11.35
20483........................ 10.9
20543........................ 10.9
20548........................ 10.9
20553........................ 10.9
20923.......................... 4.5
20928.......................... 4.5
20933.......................... 4.5
20938.......................... 4.5
20943.......................... 4.5
20948.......................... 4.5
20953.......................... 4.5
20958.......................... 4.5
20973...................... 11.30
20973...................... 11.31
20973...................... 11.32
20973...................... 11.33
20973...................... 11.36
21103........................ 10.9
21218.......................... 4.4
21847........................ 7.10
21857........................ 7.10
21878...................... 10.10
21878...................... 10.11
21878........................ 10.9
21893...................... 11.30
21898...................... 11.30
21898...................... 11.31
21898...................... 11.33
21903...................... 11.33
22088........................ 4.12
22163...................... 11.31
22168.......................... 2.4
22168.......................... 5.4
22173...................... 11.30
22338...................... 11.34
22563........................ 4.24
22563........................ 4.27
22638........................ 4.16
22653........................ 10.9
22658........................ 10.9
22663........................ 10.9
22668........................ 10.9
22673........................ 10.9
22678........................ 10.9
22683........................ 10.7
22688........................ 10.7
22958........................ 10.8
22968........................ 10.8
22973........................ 10.8
22978........................ 10.8
23282........................ 4.19
23282........................ 4.25
23297........................ 4.19
23297........................ 4.25
23297........................ 4.28
23332.......................... 8.6
23337.......................... 8.6
23448...................... 10.12
23458...................... 10.12
23463...................... 10.12
23468...................... 10.12
23473...................... 10.12
23477........................ 7.10
23478...................... 10.12
23487........................ 7.11
23488........................ 3.19
23492........................ 7.11
23493........................ 3.19
23498........................ 3.19
23692...................... 12.30
23697...................... 12.30
23702...................... 12.30
23707...................... 12.30
23712...................... 12.30
23717...................... 12.30
23738...................... 13.17
23743...................... 13.17
23908...................... 12.13
23913...................... 12.11
23913...................... 12.13
24226...................... 12.31
24226...................... 12.33
24537........................ 7.10
24542........................ 7.10
24582........................ 7.10
24587........................ 7.10
24608...................... 13.14
24797.......................... 8.6
24853...................... 12.14
25036...................... 12.29
25036...................... 12.31
25036...................... 12.33
25036...................... 12.35
25046...................... 12.27
25046...................... 12.29
25046...................... 12.35
25588........................ 3.19
25638.......................... 5.4
25648...................... 13.13
25653...................... 13.13
25668.......................... 6.3
26092........................ 4.26
26097........................ 4.26
26107........................ 4.26
26112........................ 4.26
26122........................ 4.26
26127........................ 4.26
26132........................ 4.27
26137........................ 4.27
26142........................ 4.27
26147........................ 4.27
26152........................ 4.27
26157........................ 4.27
26162........................ 4.27
26163...................... 10.10
26167........................ 4.27
26168...................... 11.32
26187........................ 4.27
26192........................ 4.27
26212........................ 4.27
26217........................ 4.27
26453...................... 13.18
26558...................... 12.11
26573...................... 13.14
26578...................... 13.14
26648.......................... 7.3
26707........................ 4.27
26773...................... 12.15
26778...................... 12.15
26803........................ 3.19
26993...................... 12.14
26998...................... 12.14
27003...................... 12.14
27008...................... 12.14
27013...................... 12.14
27023.......................... 1.8
27048...................... 12.15
27423...................... 10.10
27428...................... 10.10
27592...................... 12.30
27597...................... 12.30
27612...................... 12.30
27617...................... 12.30
27637...................... 12.30
27642...................... 12.17
27642...................... 12.29
27848.......................... 7.3
27858........................ 3.19
27998...................... 10.10
28003...................... 10.10
28008...................... 10.10
28013...................... 10.10
28018...................... 10.10
28023...................... 10.10
28028...................... 10.10
28033...................... 10.10
28038...................... 10.10
28043...................... 10.10
28048...................... 10.10
29583...................... 10.12
29798...................... 11.31
29848...................... 13.14
29963........................ 3.17
29973........................ 3.17
29973........................ 3.18
29983........................ 3.22
29993........................ 3.22
30007...................... 12.29
30032.......................... 8.5
30088........................ 3.19
30093........................ 3.19
30118.......................... 4.3
30208...................... 11.22
30703.......................... 5.4
30708.......................... 5.4
31000.......................... 1.2
31005.......................... 1.2
31010.......................... 1.2
31015.......................... 1.2
31020.......................... 1.2
31023........................ 10.5
31025.......................... 1.2
31028........................ 10.5
31030.......................... 1.2
31035.......................... 1.2
31038........................ 10.5
31040.......................... 1.2
31045.......................... 1.2
31048........................ 10.5
31050.......................... 1.3
31053........................ 10.5
31055.......................... 1.3
31060.......................... 1.3
31065.......................... 1.3
31070.......................... 1.3
31073...................... 13.14
31075.......................... 1.3
31078...................... 13.14
31080.......................... 1.3
31083...................... 13.14
31085.......................... 1.3
31088...................... 13.14
31090.......................... 1.2
31095.......................... 1.2
31100.......................... 1.2
31103...................... 13.14
31105.......................... 1.2
31108...................... 13.14
31110.......................... 1.2
31115.......................... 1.2
31120.......................... 1.4
31125.......................... 1.4
31128...................... 11.21
31128...................... 11.22
31130.......................... 1.4
31175.......................... 1.7
31180.......................... 1.7
31228........................ 10.7
31275.......................... 1.4
31280.......................... 1.4
31305.......................... 1.4
31310.......................... 1.5
31315.......................... 1.5
31320.......................... 1.5
31325.......................... 1.5
31330.......................... 1.5
31335.......................... 1.6
31340.......................... 1.6
31345.......................... 1.6
31350.......................... 1.6
31355.......................... 1.6
31360.......................... 1.6
31365.......................... 1.6
31370.......................... 1.6
31375.......................... 1.5
31380.......................... 1.5
31385.......................... 1.5
31390.......................... 1.5
31395.......................... 1.4
31400.......................... 1.5
31405.......................... 1.8
31410.......................... 3.6
31420.......................... 1.9
31425.......................... 1.9
31430.......................... 1.9
31435.......................... 1.9
31440.......................... 1.9
31442........................ 4.26
31445.......................... 1.9
31450.......................... 1.9
31455.......................... 1.9
31460.......................... 1.9
31465.......................... 1.9
31470.......................... 1.9
31475.......................... 1.9
31480.......................... 1.9
31485.......................... 1.9
31487...................... 12.21
31487...................... 12.23
31487...................... 12.25
31490.......................... 1.9
31492...................... 12.21
31492...................... 12.25
31495.......................... 1.9
31500.......................... 1.9
31502.......................... 8.6
31505.......................... 1.9
31510.......................... 1.9
31515.......................... 1.9
31520.......................... 1.9
31525.......................... 1.9
31530.......................... 1.9
31535.......................... 1.9
31555.......................... 1.9
31560.......................... 1.9
31565.......................... 1.9
31570.......................... 1.9
31575.......................... 1.9
31580.......................... 1.9
31585.......................... 1.9
31590.......................... 1.9
31595.......................... 1.9
31597.......................... 8.6
31600.......................... 1.9
31602.......................... 8.6
31605.......................... 1.9
31607.......................... 8.6
31610.......................... 1.9
31612.......................... 8.6
31615.......................... 1.9
31617.......................... 8.6
31620.......................... 1.9
31622........................ 3.15
31625.......................... 1.9
31627........................ 3.15
31630.......................... 1.9
31632........................ 3.16
31635.......................... 1.9
31637........................ 3.16
31640.......................... 1.9
31642........................ 3.16
31645.......................... 1.9
31647........................ 3.16
31650.......................... 1.9
14.9
INDEX
Catalog Number Index
Page
No.
Catalog
No.
31652........................ 3.16
31653........................ 13.4
31655.......................... 1.9
31657........................ 3.16
31660.......................... 1.9
31662........................ 3.16
31663........................ 13.5
31665.......................... 1.9
31667........................ 3.16
31670.......................... 1.9
31675.......................... 1.9
31680.......................... 1.9
31685.......................... 1.9
31690.......................... 1.9
31693...................... 13.12
31695.......................... 1.9
31700.......................... 1.9
31703...................... 13.10
31705.......................... 1.9
31710.......................... 1.9
31713...................... 13.14
31715.......................... 1.9
31718...................... 13.14
31720.......................... 1.9
31723...................... 13.14
31725.......................... 1.9
31728...................... 13.14
31730.......................... 1.9
31733...................... 13.14
31735.......................... 1.9
31738...................... 13.14
31740.......................... 1.9
31743...................... 13.14
31745.......................... 1.9
31750.......................... 1.9
31753........................ 11.6
31753........................ 11.7
31753........................ 11.8
31755.......................... 1.9
31760.......................... 1.9
31765.......................... 1.9
31770.......................... 1.9
31775.......................... 1.9
31780.......................... 1.9
31785.......................... 1.9
31787........................ 7.10
31790.......................... 1.9
31792........................ 7.10
31797........................ 7.10
31802........................ 7.10
31803........................ 3.17
31807........................ 7.10
31817........................ 7.10
31822........................ 4.28
31827........................ 4.27
31832........................ 4.27
31948...................... 11.27
31990.......................... 1.6
32015.......................... 1.6
32020.......................... 1.6
32025.......................... 1.6
32035.......................... 1.6
32050.......................... 1.6
32055.......................... 1.6
32065.......................... 1.6
32078........................ 3.17
32237........................ 4.27
32242........................ 4.27
32573........................ 3.15
32658...................... 11.10
32673...................... 11.15
32698...................... 13.14
32703...................... 13.14
32737...................... 12.19
32737...................... 12.21
32737...................... 12.23
32737...................... 12.25
32737...................... 12.27
32775.......................... 1.9
32808........................ 4.12
32820.......................... 3.2
32825.......................... 3.2
32828.......................... 5.4
32830.......................... 3.2
32833.......................... 5.4
32840.......................... 3.2
32845.......................... 3.2
32850.......................... 3.2
32870.......................... 3.3
32880.......................... 3.3
32895.......................... 3.3
32900.......................... 3.5
32903...................... 11.10
32905.......................... 3.6
32910........................ 3.17
32913...................... 11.10
32915........................ 3.17
32920........................ 3.17
32925........................ 3.17
32930........................ 3.17
32933........................ 3.15
32935........................ 3.17
32940........................ 3.17
32950........................ 3.17
32975........................ 3.14
32985........................ 3.14
33005........................ 3.17
33055........................ 3.16
33057........................ 4.27
33070........................ 3.16
33072........................ 4.27
33077........................ 4.27
33085.......................... 7.7
33100.......................... 3.7
33103...................... 11.11
33105.......................... 3.7
33108...................... 11.11
33108...................... 11.12
33110.......................... 3.7
33113...................... 11.11
33113...................... 11.12
33115.......................... 3.7
33118...................... 11.15
33120.......................... 3.7
33125.......................... 3.7
33130.......................... 3.7
33135.......................... 3.7
33145.......................... 3.7
33150.......................... 3.7
33155.......................... 3.7
33160........................ 3.18
33165........................ 3.18
33170........................ 3.18
33175........................ 3.12
33175........................ 3.13
33175........................ 3.18
33180........................ 3.18
33185........................ 3.18
33190........................ 3.18
33195........................ 3.18
33198...................... 11.15
33200........................ 3.18
33205........................ 3.18
33210........................ 3.18
33220.......................... 3.7
33225.......................... 3.7
33551........................ 3.12
33551........................ 3.13
33551........................ 3.18
33642........................ 4.27
33665.......................... 3.4
33665.......................... 3.6
33922...................... 12.30
33927.......................... 8.6
34077.......................... 4.3
34082.......................... 4.3
34087.......................... 4.3
34092.......................... 4.3
34142........................ 3.21
34147........................ 3.21
34152.......................... 8.5
34157........................ 4.27
34162........................ 4.27
34167........................ 4.27
34172........................ 4.27
34177........................ 4.27
34182........................ 4.27
34192...................... 12.23
34318...................... 11.11
34403...................... 10.13
34570.......................... 3.5
34577........................ 4.27
34623...................... 11.12
34678...................... 10.13
34695........................ 3.18
34893........................ 12.9
34945.......................... 3.8
34950.......................... 3.8
34955.......................... 3.8
34960.......................... 3.8
34963........................ 12.9
34965........................ 3.22
35133...................... 11.12
35143...................... 11.12
35155........................ 3.22
35170.......................... 8.3
35175.......................... 8.3
35180.......................... 8.3
35183...................... 11.12
35188...................... 11.12
35215.......................... 8.4
35220.......................... 8.4
35225.......................... 8.4
35230.......................... 8.4
35235.......................... 8.4
35240.......................... 8.4
35243...................... 11.12
35245.......................... 8.4
35250.......................... 8.4
35255.......................... 8.4
35260.......................... 8.4
35265.......................... 8.4
35270.......................... 8.4
35275.......................... 8.4
35280.......................... 8.4
35285.......................... 8.4
35290.......................... 8.4
35338...................... 11.12
35343........................ 10.9
35473...................... 12.12
35535........................ 7.14
35540........................ 7.14
35545........................ 7.14
35550........................ 7.14
35555........................ 7.14
35560........................ 7.14
35565........................ 7.14
35570........................ 7.14
35575........................ 7.14
35580........................ 7.14
35585........................ 7.14
35590........................ 7.15
35595.......................... 3.8
35600.......................... 3.8
35605.......................... 3.8
35610.......................... 3.8
35615.......................... 3.8
35620.......................... 3.8
35625.......................... 3.8
35630.......................... 3.8
35635.......................... 3.8
35670.......................... 3.8
35675.......................... 3.8
35680.......................... 3.8
35685.......................... 3.8
35695........................ 7.14
35700........................ 7.15
35720........................ 7.15
35725........................ 7.15
35730........................ 7.15
35735........................ 7.15
35740........................ 7.15
35745........................ 7.15
35750........................ 7.15
35755........................ 7.15
35760........................ 7.15
35765........................ 7.15
35770........................ 7.15
35775........................ 7.15
35780........................ 7.15
35785........................ 7.15
35790........................ 7.15
35795........................ 7.15
35800........................ 7.15
35805........................ 7.15
35810........................ 7.15
35815.......................... 3.8
35820.......................... 3.8
35825.......................... 3.8
35830.......................... 3.8
35835.......................... 3.8
35840.......................... 3.8
35845.......................... 3.8
35850.......................... 3.8
35855.......................... 3.8
35867........................ 4.19
35867........................ 4.31
35973...................... 11.19
35983...................... 11.19
35998...................... 12.12
36003...................... 12.12
36005........................ 3.21
36008...................... 12.12
36013...................... 12.12
36018...................... 12.12
36023...................... 12.12
36028...................... 12.12
36033...................... 12.12
36038...................... 12.12
36043...................... 12.12
36048...................... 12.12
36053...................... 12.12
36058...................... 12.12
36092.......................... 8.2
36097.......................... 8.2
36102.......................... 8.2
36112.......................... 8.2
36117.......................... 8.2
36122.......................... 8.2
36127.......................... 8.2
36132.......................... 8.2
36138........................ 13.3
36153...................... 11.24
36158...................... 11.25
36163...................... 11.27
36243.......................... 7.4
36248.......................... 7.4
36253.......................... 7.4
36258.......................... 7.4
36273.......................... 2.2
36273........................ 4.13
36273........................ 4.14
36273.......................... 5.4
36278.......................... 2.2
36278.......................... 5.4
36345.......................... 4.3
36355.......................... 4.3
36375.......................... 4.3
36380.......................... 4.3
36390.......................... 4.3
36475.......................... 4.3
36480.......................... 4.3
36505.......................... 4.3
36510.......................... 4.3
36518.......................... 8.7
36523.......................... 8.7
36540.......................... 4.4
36550.......................... 4.4
36555.......................... 4.4
36560.......................... 4.4
36565.......................... 4.8
36570.......................... 4.8
36592........................ 3.16
36597........................ 3.16
36620........................ 4.10
36630........................ 4.10
36653...................... 11.19
36662........................ 3.12
36662........................ 3.13
36663...................... 11.19
36680.......................... 4.4
36683........................ 13.6
36690.......................... 4.4
36738...................... 11.21
36813...................... 11.26
36875.......................... 4.5
36880.......................... 4.5
36885.......................... 4.5
36890.......................... 4.5
36895.......................... 4.5
36900.......................... 4.5
36935.......................... 4.5
36940.......................... 4.5
36942.......................... 8.2
36945.......................... 4.5
36947.......................... 8.2
36950.......................... 4.5
36952.......................... 8.2
36955.......................... 4.5
36957.......................... 8.2
36960.......................... 4.5
36962.......................... 8.2
36965.......................... 4.5
36967.......................... 8.2
36970.......................... 4.5
36972.......................... 8.2
36975.......................... 4.5
36980.......................... 4.5
36985.......................... 4.5
36990.......................... 4.5
36995.......................... 4.5
37000.......................... 4.5
37005.......................... 4.5
37010.......................... 4.5
37015.......................... 4.5
37020.......................... 4.5
37025.......................... 4.5
37030.......................... 4.5
37035.......................... 4.5
37040.......................... 4.5
37045.......................... 4.5
37050.......................... 4.5
37055.......................... 4.5
37070.......................... 4.7
37083...................... 11.22
37088...................... 11.22
37093...................... 11.21
37093...................... 11.22
37093...................... 11.23
37095.......................... 4.5
37098...................... 11.21
37098...................... 11.22
37098...................... 11.23
37100.......................... 4.5
37103...................... 11.21
37103...................... 11.22
37105.......................... 4.5
37108...................... 11.21
37108...................... 11.22
37110.......................... 4.5
37113...................... 11.21
37113...................... 11.22
37115.......................... 4.5
37120.......................... 4.5
37123...................... 11.20
37123...................... 11.21
37123...................... 11.22
37125.......................... 4.5
37130.......................... 4.5
37135.......................... 4.5
37140.......................... 4.5
37145.......................... 4.5
37150.......................... 4.5
37155.......................... 4.5
37160.......................... 4.5
37165.......................... 4.5
37170.......................... 4.5
37175.......................... 4.5
37180.......................... 4.5
37185.......................... 4.5
37190.......................... 4.5
37195.......................... 4.5
37223.......................... 8.8
37228.......................... 8.8
37233.......................... 8.8
37238.......................... 8.8
37243.......................... 8.8
37248.......................... 8.8
37253.......................... 8.8
37258.......................... 8.8
37263.......................... 8.8
37273.......................... 8.8
37278.......................... 8.8
37293.......................... 8.8
37375.......................... 4.5
37380.......................... 4.5
INDEX
14.10
37385.......................... 4.5
37390.......................... 4.5
37395.......................... 4.5
37400.......................... 4.5
37405.......................... 4.5
37410.......................... 4.5
37413...................... 12.42
37415.......................... 4.5
37435.......................... 4.5
37440.......................... 4.5
37445.......................... 4.5
37450.......................... 4.5
37455.......................... 4.5
37460.......................... 4.5
37465.......................... 4.5
37468...................... 11.11
37470.......................... 4.5
37473...................... 11.11
37475.......................... 4.5
37480.......................... 4.5
37483...................... 11.11
37485.......................... 4.5
37490.......................... 4.5
37495.......................... 4.5
37500.......................... 4.5
37505.......................... 4.5
37510.......................... 4.5
37515.......................... 4.5
37520.......................... 4.5
37525.......................... 4.5
37530.......................... 4.5
37535.......................... 4.5
37540.......................... 4.5
37545.......................... 4.5
37550.......................... 4.5
37555.......................... 4.5
37560.......................... 4.5
37565.......................... 4.5
37570.......................... 4.5
37575.......................... 4.5
37580.......................... 4.5
37585.......................... 4.5
37590.......................... 4.5
37595.......................... 4.5
37610.......................... 4.5
37615.......................... 4.5
37618.......................... 8.8
37620.......................... 4.5
37625.......................... 4.5
37628...................... 12.19
37628...................... 12.27
37630.......................... 4.5
37633...................... 12.19
37633...................... 12.27
37635.......................... 4.5
37638...................... 12.19
37638...................... 12.27
37640.......................... 4.5
37643...................... 12.19
37643...................... 12.27
37645.......................... 4.5
37650.......................... 4.5
37655.......................... 4.5
37675.......................... 4.5
37695.......................... 4.5
37710.......................... 4.5
37715.......................... 4.5
37720.......................... 4.5
37725.......................... 4.5
37730.......................... 4.5
37735.......................... 4.5
37740.......................... 4.5
37745.......................... 4.5
37755.......................... 4.5
37775.......................... 4.5
37777.......................... 4.3
37780.......................... 4.5
37785.......................... 4.5
37790.......................... 4.5
37795.......................... 4.5
37800.......................... 4.5
37805.......................... 4.5
37810.......................... 4.7
37813.......................... 8.8
37815.......................... 4.7
37820.......................... 4.7
37825.......................... 4.7
37828.......................... 8.8
37830.......................... 4.7
37835.......................... 4.7
37840.......................... 4.7
37842...................... 12.17
37845.......................... 4.7
37847...................... 12.17
37850.......................... 4.7
37852...................... 12.17
37855.......................... 4.7
37857...................... 12.17
37860.......................... 4.7
37862...................... 12.17
37865.......................... 4.7
37867...................... 12.17
37870.......................... 4.7
37875.......................... 4.7
37880.......................... 4.7
37885.......................... 4.7
37888...................... 11.22
37890.......................... 4.7
37895.......................... 4.7
37900.......................... 4.7
37905.......................... 4.7
37910.......................... 4.7
37915.......................... 4.7
37920.......................... 4.7
37925.......................... 4.7
37930.......................... 4.7
37935.......................... 4.7
37940.......................... 4.7
37945.......................... 4.7
37950.......................... 4.7
37953...................... 10.11
37955.......................... 4.7
37958...................... 10.11
37960.......................... 4.7
37963...................... 10.11
37965.......................... 4.7
37968...................... 10.11
37973...................... 10.11
37975.......................... 4.7
37978...................... 10.11
37980.......................... 4.7
37983...................... 10.11
37985.......................... 4.7
37988...................... 10.11
37993...................... 10.11
37997.......................... 2.4
37998...................... 10.11
38003...................... 10.11
38008...................... 10.11
38028.......................... 8.3
38033.......................... 8.3
38038.......................... 8.3
38043.......................... 8.3
38048.......................... 8.3
38050.......................... 4.7
38053.......................... 8.3
38055.......................... 4.7
38058.......................... 8.3
38060.......................... 4.7
38063.......................... 8.3
38065.......................... 4.7
38070.......................... 4.7
38075.......................... 4.7
38078.......................... 8.8
38080.......................... 4.7
38083.......................... 8.8
38085.......................... 4.7
38100.......................... 4.8
38105.......................... 4.8
38110.......................... 4.8
38120........................ 4.11
38125........................ 4.11
38130........................ 4.11
38140........................ 4.11
38155........................ 4.11
38220.......................... 4.8
38225.......................... 4.8
38230.......................... 4.8
38235.......................... 4.8
38240.......................... 4.8
38245.......................... 4.8
38250.......................... 4.8
38255.......................... 4.8
38335.......................... 4.7
38340.......................... 4.7
38345.......................... 4.7
38350.......................... 4.7
38355.......................... 4.7
38360.......................... 4.7
38365.......................... 4.7
38370.......................... 4.7
38375.......................... 4.7
38380.......................... 4.7
38385.......................... 4.7
38390.......................... 4.7
38395.......................... 4.7
38400.......................... 4.7
38405.......................... 4.7
38410.......................... 4.7
38415.......................... 4.7
38420.......................... 4.7
38425.......................... 4.7
38535.......................... 4.3
38540.......................... 4.3
38550.......................... 4.3
38568.......................... 8.8
38605.......................... 4.4
38610.......................... 4.4
38615.......................... 4.4
38620.......................... 4.4
38625.......................... 4.4
38693...................... 12.42
38698...................... 12.42
38703...................... 12.42
38708...................... 12.42
38713...................... 12.42
38718...................... 12.42
38723...................... 12.42
39187........................ 4.14
39328...................... 11.16
39338...................... 11.16
39380........................ 4.10
39587........................ 4.28
39966.......................... 9.3
39976.......................... 9.3
39998...................... 11.13
40005........................ 4.10
40008...................... 11.13
40043...................... 11.20
40048...................... 13.13
40080.......................... 2.3
40090.......................... 2.3
40100.......................... 2.3
40103........................ 13.8
40108...................... 13.11
40110.......................... 2.3
40125.......................... 2.3
40130.......................... 2.2
40153...................... 13.17
40158...................... 13.16
40163...................... 13.14
40165.......................... 2.2
40168...................... 13.14
40170.......................... 2.3
40175.......................... 2.2
40180.......................... 2.2
40185.......................... 2.2
40190.......................... 2.2
40195.......................... 2.2
40200.......................... 2.2
40205.......................... 2.2
40210.......................... 2.2
40215.......................... 2.2
40220.......................... 2.3
40225.......................... 2.3
40230.......................... 2.3
40235.......................... 2.3
40593...................... 11.11
40617........................ 3.14
40778...................... 11.11
40788...................... 11.11
40798...................... 11.12
40808...................... 11.12
40818...................... 11.13
40868........................ 3.20
40938........................ 3.21
41212...................... 12.21
41212...................... 12.23
41212...................... 12.24
41285.......................... 8.7
41295.......................... 8.7
41300.......................... 8.7
41315.......................... 8.7
41320.......................... 8.7
41325.......................... 8.7
41330.......................... 8.7
41335.......................... 8.7
41340.......................... 8.7
41345.......................... 8.7
41348........................ 12.9
41350.......................... 8.7
41408........................ 12.8
41438...................... 13.18
41575........................ 4.12
41585........................ 4.12
41588........................ 13.7
41590........................ 4.12
41593...................... 13.14
41598...................... 13.14
41600........................ 4.12
41603...................... 13.14
41608........................ 3.20
41610........................ 4.12
41697...................... 12.21
41697...................... 12.23
41697...................... 12.24
41703........................ 3.21
41768........................ 3.21
41855........................ 4.16
41855.......................... 5.4
41860........................ 4.16
41935........................ 4.15
41937...................... 12.11
41937...................... 12.13
41937...................... 12.15
41937...................... 12.17
41937...................... 12.21
41937...................... 12.23
41937...................... 12.25
41937...................... 12.38
41937...................... 12.39
41937...................... 12.41
41937...................... 12.43
41940........................ 4.15
41977...................... 12.20
41982...................... 12.21
41982...................... 12.25
41992...................... 12.21
41992...................... 12.23
41992...................... 12.25
42002...................... 12.20
42007...................... 12.20
42012...................... 12.20
42047........................ 4.25
42052........................ 4.25
42057........................ 4.25
42062........................ 4.25
42067........................ 4.25
42072........................ 4.25
42077........................ 4.25
42082........................ 4.25
42087........................ 4.25
42153.......................... 8.6
42163........................ 12.8
42323...................... 11.14
42328...................... 11.14
42348........................ 11.9
42360........................ 3.13
42360........................ 4.16
42360.......................... 5.4
42365........................ 4.16
42365........................ 4.19
42365........................ 4.21
42370........................ 4.16
42385........................ 4.16
42390........................ 4.19
42390........................ 4.21
42405........................ 4.10
42405........................ 4.21
42415........................ 4.10
42415........................ 4.21
42485........................ 4.19
42485........................ 4.25
42490........................ 4.19
42490........................ 4.25
42505.......................... 2.5
42505........................ 4.10
42510.......................... 2.5
42575........................ 4.16
42575.......................... 5.8
42600........................ 4.15
42605........................ 4.15
42610........................ 4.15
42615........................ 4.15
42620........................ 4.15
42625........................ 4.15
42878.......................... 3.5
42950........................ 4.15
43138........................ 11.9
43348........................ 10.6
43353........................ 10.6
43358........................ 10.6
43363........................ 10.6
43368........................ 10.6
43373........................ 10.6
43378........................ 10.6
43428........................ 10.4
43433........................ 10.4
43438........................ 10.4
43443........................ 10.4
43448........................ 10.4
43453........................ 10.4
43458........................ 10.4
43458........................ 10.5
43458........................ 10.6
43458........................ 11.1
43458...................... 11.19
43507...................... 12.32
43512...................... 12.32
43573........................ 3.22
43637...................... 12.21
43637...................... 12.25
43642...................... 12.21
43642...................... 12.25
43647...................... 12.19
43647...................... 12.21
43647...................... 12.23
43647...................... 12.24
43647...................... 12.27
43853...................... 10.12
43858...................... 10.12
44117...................... 12.21
44117...................... 12.23
44117...................... 12.25
44122...................... 12.19
44122...................... 12.21
44122...................... 12.23
44122...................... 12.25
44122...................... 12.27
44185.......................... 3.7
44190.......................... 3.7
44202...................... 12.20
44212...................... 12.20
44217...................... 12.20
44468........................ 10.6
44483........................ 10.6
44587...................... 12.34
44693........................ 10.4
44693........................ 10.5
44693........................ 10.6
44693........................ 11.1
44693...................... 11.19
44698........................ 10.4
44698........................ 10.5
44698........................ 10.6
44698........................ 11.1
44798........................ 10.4
44798........................ 10.5
44798........................ 10.6
44848........................ 10.4
44848........................ 10.5
44848........................ 10.6
44848...................... 11.15
44848...................... 11.16
44848...................... 11.18
44852.......................... 8.3
Catalog Number Index
Page
No.
Catalog
No.
14.11
INDEX
44853........................ 10.4
44853........................ 10.5
44853........................ 10.6
44853...................... 11.15
44853...................... 11.16
44853...................... 11.18
44913........................ 4.13
44918........................ 4.13
44923........................ 4.14
44928........................ 4.14
44992........................ 4.27
44997........................ 4.27
45002........................ 4.27
45007.......................... 5.5
45138...................... 11.18
45143...................... 11.18
45158........................ 11.1
45158...................... 11.17
45163........................ 11.1
45163...................... 11.17
45178........................ 4.15
45302...................... 12.32
45307...................... 12.32
45347.......................... 5.5
45352.......................... 5.5
45358...................... 11.23
45363........................ 11.1
45363...................... 11.17
45848.......................... 4.7
45853.......................... 4.7
45858.......................... 4.7
45863.......................... 4.7
45868.......................... 4.7
45873.......................... 4.7
45878.......................... 4.7
45883.......................... 4.7
45888.......................... 4.7
45923........................ 4.13
45928........................ 4.14
46105........................ 3.13
46660........................ 4.16
46668........................ 4.13
46673........................ 4.14
46708........................ 11.9
46713........................ 11.9
46732.......................... 4.8
46737.......................... 4.8
46742.......................... 4.8
46747.......................... 4.8
46837...................... 12.32
46852.......................... 5.5
46902...................... 12.32
46907...................... 12.32
46918...................... 11.30
47047...................... 12.20
47057.......................... 1.2
47082.......................... 6.6
47087.......................... 6.6
47222.......................... 5.6
47268...................... 12.54
47273...................... 12.52
47278...................... 12.52
47283...................... 12.51
47288...................... 12.48
47293...................... 12.47
47298...................... 12.47
47303...................... 12.46
47308...................... 12.46
47313...................... 12.54
47318...................... 12.45
47323...................... 12.51
47328...................... 12.50
47333...................... 12.44
47338...................... 12.44
47343...................... 12.44
47348...................... 12.44
47427...................... 12.21
47427...................... 12.23
47427...................... 12.25
47432...................... 12.21
47432...................... 12.23
47432...................... 12.25
47542...................... 12.38
47542...................... 12.39
47542...................... 12.41
47542...................... 12.43
47597...................... 12.38
47597...................... 12.39
47597...................... 12.41
47597...................... 12.43
47598...................... 12.54
47602...................... 12.38
47602...................... 12.39
47602...................... 12.41
47602...................... 12.43
47607...................... 12.38
47607...................... 12.39
47607...................... 12.41
47612...................... 12.41
47663...................... 12.56
47668...................... 12.55
47673...................... 12.55
47678...................... 12.55
47683...................... 12.45
47688........................ 12.5
47693...................... 12.49
47735........................ 4.28
47740........................ 4.28
47745........................ 4.28
47750........................ 4.28
47755........................ 4.28
47760........................ 4.28
47765........................ 4.28
47770........................ 4.28
47775........................ 4.28
47780........................ 4.28
47785........................ 4.28
47790........................ 4.28
47810........................ 4.28
47815........................ 4.28
47820........................ 4.28
47845........................ 4.28
47850........................ 4.28
47855........................ 4.28
47860........................ 4.28
47868...................... 12.51
47873...................... 12.51
47880........................ 4.28
47885........................ 4.28
47890........................ 4.28
47895........................ 4.28
47900........................ 4.28
47905........................ 4.28
47910........................ 4.28
47940........................ 4.28
48083...................... 10.11
48093........................ 11.1
48103........................ 11.1
48113........................ 11.1
48143........................ 11.1
48148........................ 11.1
48157...................... 12.41
48157...................... 12.43
48215........................ 4.29
48220........................ 4.29
48225........................ 4.29
48230........................ 4.29
48235........................ 4.29
48240........................ 4.29
48245........................ 4.29
48250........................ 4.29
48255........................ 4.29
48260........................ 4.29
48265........................ 4.29
48270........................ 4.29
48275........................ 4.29
48280........................ 4.29
48285........................ 4.29
48290........................ 4.29
48292.......................... 5.6
48295........................ 4.29
48297.......................... 5.6
48305........................ 4.29
48307.......................... 5.5
48310........................ 4.29
48315........................ 4.29
48320........................ 4.29
48325........................ 4.29
48330........................ 4.29
48335........................ 4.29
48340........................ 4.29
48345........................ 4.29
48350........................ 4.29
48355........................ 4.29
48360........................ 4.29
48367...................... 12.38
48367...................... 12.39
48367...................... 12.41
48367...................... 12.43
48375........................ 4.29
48377.......................... 5.6
48382.......................... 5.6
48387.......................... 5.6
48392.......................... 5.6
48397.......................... 5.6
48402.......................... 5.6
48405.......................... 5.6
48405.......................... 5.7
48407.......................... 5.6
48407.......................... 5.7
48412.......................... 5.6
48412.......................... 5.7
48417.......................... 5.6
48417.......................... 5.7
48457...................... 12.33
48462...................... 12.34
48472...................... 12.29
48482...................... 12.11
48482...................... 12.13
48482...................... 12.15
48482...................... 12.27
48488........................ 11.6
48533........................ 11.6
48605.......................... 4.3
48610.......................... 4.3
48615.......................... 4.3
48620.......................... 4.3
48625.......................... 4.3
48630.......................... 4.3
48635.......................... 4.3
48640.......................... 4.3
48645.......................... 4.3
48650.......................... 4.3
48655.......................... 4.3
48660.......................... 4.3
48665.......................... 4.3
48670.......................... 4.3
48675.......................... 4.3
48680.......................... 4.3
48690.......................... 4.3
48695.......................... 4.3
48700.......................... 4.3
48705.......................... 4.3
48710.......................... 4.3
48715.......................... 4.3
48720.......................... 4.3
48725.......................... 4.3
48730.......................... 4.3
48735.......................... 4.3
48740.......................... 4.3
48745.......................... 4.3
48755.......................... 4.3
48915.......................... 4.3
48920.......................... 4.3
48925.......................... 4.3
48930.......................... 4.3
48935.......................... 4.3
48940.......................... 4.3
48945.......................... 4.3
48950.......................... 4.3
48955.......................... 4.3
48960.......................... 4.3
48965.......................... 4.3
48970.......................... 4.3
48975.......................... 4.3
48985.......................... 4.3
49002...................... 12.15
49002...................... 12.17
49032...................... 12.19
49032...................... 12.21
49032...................... 12.23
49032...................... 12.25
49215........................ 4.29
49220........................ 4.29
49225........................ 4.29
49230........................ 4.29
49240........................ 4.29
49245........................ 4.29
49250........................ 4.29
49272...................... 12.38
49272...................... 12.39
49272...................... 12.41
49272...................... 12.43
49277...................... 12.38
49277...................... 12.39
49277...................... 12.41
49277...................... 12.43
49305.......................... 4.3
49345........................ 4.29
49487...................... 12.38
49487...................... 12.39
49487...................... 12.41
49585.......................... 4.3
49600.......................... 4.3
49610.......................... 4.3
49662.......................... 5.6
49707.......................... 4.7
49712.......................... 4.7
49717.......................... 4.7
49722.......................... 4.7
49727.......................... 4.7
49795.......................... 4.3
49805.......................... 4.3
49815.......................... 4.3
49820.......................... 4.3
49825.......................... 4.3
49830.......................... 4.3
49835.......................... 4.3
49840.......................... 4.3
49845.......................... 4.3
49850.......................... 4.3
49870.......................... 4.3
49875.......................... 4.3
49890.......................... 4.3
49895.......................... 4.3
49900.......................... 4.3
49905.......................... 4.3
49915.......................... 4.3
49925.......................... 4.3
49930.......................... 4.3
49932.......................... 4.6
49937.......................... 4.6
49942.......................... 4.6
49947.......................... 4.6
49952.......................... 4.6
49962.......................... 4.6
49967.......................... 4.6
49972.......................... 1.9
50002...................... 12.38
50002...................... 12.41
50002...................... 12.43
50007...................... 12.38
50007...................... 12.41
50007...................... 12.43
50012........................ 4.28
50040.......................... 4.3
50050.......................... 4.3
50060.......................... 4.3
50070.......................... 4.3
50075.......................... 4.3
50080.......................... 4.3
50085.......................... 4.3
50090.......................... 4.3
50095.......................... 4.3
50100.......................... 4.3
50105.......................... 4.3
50110.......................... 4.3
50115.......................... 4.3
50120.......................... 4.3
50125.......................... 4.3
50130.......................... 4.3
50140.......................... 4.3
50480.......................... 4.3
50482........................ 7.13
50485.......................... 4.3
50487........................ 7.13
50490.......................... 4.3
50495.......................... 4.3
50500.......................... 4.3
50505.......................... 4.3
50510.......................... 4.3
50515.......................... 4.3
50520.......................... 4.3
50522.......................... 7.6
50525.......................... 4.3
50530.......................... 4.3
50532.......................... 7.6
50540.......................... 4.3
50545.......................... 4.3
50550.......................... 4.3
50557.......................... 9.2
50560.......................... 4.3
50575.......................... 4.3
50585.......................... 4.3
50590.......................... 4.3
50645........................ 4.28
50647...................... 12.11
50647...................... 12.13
50650........................ 4.28
50652...................... 12.11
50652...................... 12.13
50652...................... 12.17
50657...................... 12.11
50657...................... 12.13
50657...................... 12.17
50700........................ 4.28
50705........................ 4.28
50710........................ 4.28
50715........................ 4.28
50720........................ 4.28
50725........................ 4.28
50730........................ 4.28
50735........................ 4.28
50740........................ 4.28
50745........................ 4.28
50750........................ 4.28
50755........................ 4.28
50760........................ 4.28
50765........................ 4.28
50767.......................... 3.9
50770........................ 4.28
50775........................ 4.28
50780........................ 4.28
50785........................ 4.28
50812........................ 3.10
50812.......................... 3.9
50895........................ 4.28
50900........................ 4.28
50905........................ 4.28
50910........................ 4.28
50915........................ 4.28
50920........................ 4.28
50960........................ 4.29
50965........................ 4.29
50985........................ 4.29
51005........................ 4.16
51005........................ 4.19
51005........................ 4.21
51005........................ 4.23
51005........................ 4.27
51005........................ 4.31
51020........................ 4.31
51022.......................... 6.6
51040........................ 4.31
51045........................ 4.31
51050........................ 4.31
51055........................ 4.31
51060........................ 4.31
51065........................ 4.31
51070........................ 4.31
51075........................ 4.31
51206.......................... 8.5
51317...................... 12.15
51317...................... 12.27
51317...................... 12.29
51402...................... 12.20
51407...................... 12.20
51507.......................... 6.7
51512.......................... 6.7
51517.......................... 6.7
51522.......................... 6.7
51527.......................... 6.7
51537.......................... 6.7
51542.......................... 6.7
51547.......................... 6.7
51557.......................... 6.7
Catalog Number Index
Page
No.
Catalog
No.
INDEX
14.12
51572...................... 12.38
51572...................... 12.39
51587...................... 12.38
51587...................... 12.39
51587...................... 12.41
51597...................... 12.38
51597...................... 12.39
51597...................... 12.41
51752...................... 12.17
51762...................... 12.19
51762...................... 12.21
51762...................... 12.23
51762...................... 12.25
51857.......................... 4.5
51862.......................... 4.5
51867.......................... 4.5
51872.......................... 4.5
51877.......................... 4.5
51882.......................... 4.5
52192........................ 4.29
52202........................ 4.29
52217........................ 4.29
52300........................ 7.13
52305........................ 7.13
52310........................ 7.13
52315........................ 7.13
52420.......................... 8.5
52425.......................... 8.5
52430.......................... 8.5
52435.......................... 8.5
52440.......................... 8.5
52450.......................... 7.5
52455.......................... 7.5
52465.......................... 7.5
52470.......................... 7.5
52475.......................... 7.5
52480.......................... 7.5
52485.......................... 7.5
52490.......................... 7.5
52495.......................... 7.5
52505.......................... 7.5
52755.......................... 6.5
52760.......................... 6.5
52760.......................... 6.8
52760.......................... 6.9
52765.......................... 6.5
52770.......................... 6.5
52775.......................... 6.5
52780.......................... 6.5
52780.......................... 6.8
52780.......................... 6.9
52785.......................... 6.5
52790.......................... 6.5
52795.......................... 6.5
52800.......................... 6.5
52800.......................... 6.9
52805.......................... 6.5
52810.......................... 6.5
52812...................... 12.13
52812...................... 12.15
52812...................... 12.17
52812...................... 12.27
52815.......................... 6.5
52817...................... 12.13
52817...................... 12.15
52817...................... 12.17
52817...................... 12.27
52820.......................... 6.5
52820.......................... 6.9
52822...................... 12.13
52822...................... 12.15
52822...................... 12.17
52822...................... 12.27
52825.......................... 6.5
52830.......................... 6.5
52835.......................... 6.5
52840.......................... 6.5
52845.......................... 6.5
52850.......................... 6.5
52850.......................... 6.9
52855.......................... 6.5
52860.......................... 6.5
52865.......................... 6.5
52870.......................... 6.5
52875.......................... 6.5
52880.......................... 6.5
52885.......................... 6.5
52890.......................... 6.5
52895.......................... 6.5
52900.......................... 6.5
52905.......................... 6.5
52910.......................... 6.5
52915.......................... 6.5
52920.......................... 6.5
52925.......................... 6.5
52930.......................... 6.5
52935.......................... 6.5
52940.......................... 6.5
52945.......................... 6.5
52950.......................... 6.5
52955.......................... 6.5
52957...................... 12.38
52957...................... 12.39
52960.......................... 6.5
52962...................... 12.27
52965.......................... 6.5
52970.......................... 6.5
52972...................... 12.26
52975.......................... 6.5
52980.......................... 6.5
52985.......................... 6.5
52990.......................... 6.5
52995.......................... 6.5
53000.......................... 6.5
53037...................... 12.38
53037...................... 12.39
53065.......................... 6.4
53070.......................... 6.4
53075.......................... 6.4
53080.......................... 6.4
53085.......................... 6.4
53107...................... 12.16
53112...................... 12.16
53117...................... 12.16
53122...................... 12.16
53127...................... 12.16
54115.......................... 7.9
54120.......................... 7.9
54125.......................... 7.9
54135........................ 7.12
54270........................ 7.12
54397........................ 3.10
54397.......................... 3.9
54440........................ 7.12
54445........................ 7.12
54450........................ 7.12
54465........................ 7.12
54480........................ 7.12
54500........................ 7.12
54520........................ 7.12
54540........................ 7.12
54575........................ 7.12
54837...................... 12.11
54837...................... 12.13
54837...................... 12.15
54837...................... 12.17
54837...................... 12.27
54842...................... 12.17
54842...................... 12.29
54852...................... 12.17
54852...................... 12.29
54992...................... 12.17
55002...................... 12.17
55007...................... 12.17
55012...................... 12.17
55017...................... 12.17
55207.......................... 4.3
55447........................ 4.27
55452........................ 4.27
55457...................... 12.11
55457...................... 12.13
55457...................... 12.15
55457...................... 12.17
55457...................... 12.27
55467...................... 12.17
56337.......................... 4.7
56342.......................... 4.7
56347.......................... 4.7
56352.......................... 4.7
56367.......................... 4.7
56657.......................... 2.4
56667.......................... 2.4
56672.......................... 2.4
56682.......................... 2.4
56782...................... 12.11
56782...................... 12.13
56782...................... 12.17
56782...................... 12.27
56787...................... 12.11
56787...................... 12.13
56787...................... 12.17
56787...................... 12.27
56792...................... 12.11
56792...................... 12.13
56792...................... 12.17
56797...................... 12.11
56797...................... 12.13
56797...................... 12.17
56847.......................... 7.6
56852.......................... 7.6
56892.......................... 6.6
56897.......................... 6.6
57492........................ 4.27
57497........................ 4.27
57502........................ 4.27
57507........................ 4.27
57592.......................... 6.3
57597.......................... 6.3
58007........................ 4.21
58192...................... 12.19
58192...................... 12.21
58192...................... 12.23
58192...................... 12.25
58192...................... 12.27
58222........................ 3.10
58222.......................... 3.9
58227........................ 3.10
58712........................ 4.27
58747.......................... 8.5
58752........................ 4.23
58757........................ 4.23
58890........................ 12.8
58895........................ 12.8
58920...................... 12.26
58960...................... 12.26
58980...................... 12.26
59000...................... 12.26
59132.......................... 6.3
59175...................... 12.36
59190........................ 12.7
59205...................... 12.27
59205...................... 12.29
59205...................... 12.31
59205...................... 12.33
59205...................... 12.35
59205...................... 12.37
59210...................... 12.27
59210...................... 12.29
59225...................... 12.17
59225...................... 12.29
59225...................... 12.31
59225...................... 12.33
59225...................... 12.35
59225...................... 12.37
59230...................... 12.15
59230...................... 12.17
59230...................... 12.27
59230...................... 12.29
59235...................... 12.27
59240...................... 12.31
59240...................... 12.33
59240...................... 12.35
59250...................... 12.27
59255...................... 12.27
59265...................... 12.27
59270...................... 12.27
59295...................... 12.27
59295...................... 12.29
59295...................... 12.31
59295...................... 12.33
59295...................... 12.35
59295...................... 12.37
59300...................... 12.31
59300...................... 12.33
59300...................... 12.35
59320...................... 12.31
59320...................... 12.33
59320...................... 12.35
59325...................... 12.31
59325...................... 12.33
59360...................... 12.19
59360...................... 12.21
59360...................... 12.23
59360...................... 12.25
59360...................... 12.29
59360...................... 12.31
59360...................... 12.33
59360...................... 12.35
59360...................... 12.37
59365...................... 12.27
59365...................... 12.29
59370...................... 12.27
59395...................... 12.31
59395...................... 12.33
59395...................... 12.35
59400...................... 12.31
59400...................... 12.33
59400...................... 12.35
59415...................... 12.31
59415...................... 12.33
59415...................... 12.35
59425...................... 12.29
59440...................... 12.31
59440...................... 12.33
59440...................... 12.35
59445...................... 12.29
59450...................... 12.27
59462...................... 12.16
59470...................... 12.29
59470...................... 12.31
59470...................... 12.33
59470...................... 12.35
59475...................... 12.31
59475...................... 12.33
59475...................... 12.35
59480...................... 12.31
59480...................... 12.33
59480...................... 12.35
59485...................... 12.31
59485...................... 12.33
59485...................... 12.35
59502.......................... 6.3
59502.......................... 6.4
59555...................... 12.37
59560...................... 12.37
59562...................... 12.22
59625...................... 12.31
59625...................... 12.33
59625...................... 12.35
59765...................... 12.31
59765...................... 12.33
59765...................... 12.35
59765...................... 12.37
59770...................... 12.31
59770...................... 12.33
59770...................... 12.35
59770...................... 12.37
59775...................... 12.31
59775...................... 12.33
59775...................... 12.35
59775...................... 12.37
59780...................... 12.31
59780...................... 12.33
59780...................... 12.35
59780...................... 12.37
59787........................ 12.6
59797........................ 12.6
59802........................ 12.6
59812........................ 12.8
59835...................... 12.37
59917...................... 12.17
59992.......................... 5.6
59992.......................... 5.7
60002........................ 3.10
60002.......................... 3.9
60032...................... 12.23
60037...................... 12.23
60042...................... 12.23
60047...................... 12.23
60052...................... 12.22
60062...................... 12.22
60087...................... 12.17
60355...................... 12.37
60360...................... 12.37
60365...................... 12.37
60382.......................... 5.5
60700...................... 12.37
61102...................... 12.22
61107...................... 12.23
61122........................ 4.10
61122........................ 4.27
61142........................ 4.22
61187........................ 4.22
61512...................... 12.22
61517...................... 12.22
61522...................... 12.22
61542...................... 12.22
61615...................... 12.29
61625...................... 12.29
61625...................... 12.31
61625...................... 12.33
61630...................... 12.29
61630...................... 12.31
61630...................... 12.33
61757........................ 3.10
61757.......................... 3.9
61770...................... 12.31
61770...................... 12.33
61770...................... 12.35
61790...................... 12.31
61790...................... 12.33
61790...................... 12.35
61790...................... 12.37
61800...................... 12.31
61800...................... 12.33
61800...................... 12.35
61800...................... 12.37
61820........................ 12.7
61825...................... 12.31
61825...................... 12.33
61825...................... 12.35
61850...................... 12.31
61850...................... 12.33
61850...................... 12.35
61850...................... 12.37
61855...................... 12.31
61855...................... 12.33
61855...................... 12.35
61855...................... 12.37
61875...................... 12.37
61885...................... 12.37
61960...................... 12.31
61960...................... 12.33
61960...................... 12.35
61960...................... 12.37
61970...................... 12.31
61970...................... 12.33
61970...................... 12.35
61975...................... 12.31
61975...................... 12.35
62045...................... 12.37
62050...................... 12.37
62055...................... 12.37
62060...................... 12.37
62065...................... 12.37
62067...................... 12.27
62075...................... 12.37
62080...................... 12.37
62090...................... 12.37
62095...................... 12.37
62100...................... 12.37
62105...................... 12.37
62110...................... 12.37
62115...................... 12.37
62120...................... 12.37
62125...................... 12.37
62140...................... 12.37
62170...................... 12.37
62225...................... 12.11
62225...................... 12.13
62225...................... 12.27
62235...................... 12.11
62235...................... 12.13
62235...................... 12.27
62245...................... 12.11
62245...................... 12.13
Catalog Number Index
Page
No.
Catalog
No.
14.13
INDEX
62245...................... 12.27
62250...................... 12.11
62250...................... 12.13
62250...................... 12.27
62260...................... 12.11
62260...................... 12.13
62260...................... 12.27
62265...................... 12.27
62265...................... 12.29
62270...................... 12.27
62270...................... 12.29
62275...................... 12.29
62275...................... 12.31
62275...................... 12.33
62275...................... 12.35
62280...................... 12.31
62280...................... 12.33
62280...................... 12.35
62285...................... 12.31
62285...................... 12.33
62285...................... 12.35
62295...................... 12.31
62295...................... 12.33
62295...................... 12.35
62300...................... 12.31
62300...................... 12.33
62300...................... 12.35
62347.......................... 7.9
62352.......................... 7.9
62362.......................... 7.9
62370...................... 12.37
62375...................... 12.37
62385...................... 12.37
62390...................... 12.37
62412...................... 12.17
62457........................ 4.22
62457........................ 4.31
62467...................... 12.31
62467...................... 12.33
62472...................... 12.31
62472...................... 12.33
62530........................ 12.7
62535........................ 12.7
62540........................ 12.7
62545........................ 12.7
62555........................ 12.7
62565........................ 12.7
62587...................... 12.38
62592...................... 12.38
62592...................... 12.39
62595........................ 12.7
62597...................... 12.38
62605........................ 12.7
62615........................ 12.7
62625........................ 12.7
62662.......................... 9.5
62687...................... 12.39
62697...................... 12.39
62747.......................... 9.5
62757...................... 12.38
62757...................... 12.39
62772.......................... 9.5
62802.......................... 9.5
62812.......................... 9.5
62815...................... 12.37
62840...................... 12.31
62840...................... 12.33
62840...................... 12.35
62845...................... 12.31
62845...................... 12.33
62845...................... 12.35
62850...................... 12.17
62850...................... 12.29
62855...................... 12.17
62855...................... 12.29
62860...................... 12.29
62862.......................... 9.3
62865...................... 12.17
62865...................... 12.29
62870...................... 12.17
62870...................... 12.29
62875...................... 12.17
62875...................... 12.29
62877...................... 12.39
62877...................... 12.41
62880...................... 12.17
62880...................... 12.29
62882...................... 12.38
62882...................... 12.39
62882...................... 12.41
62882...................... 12.43
62887...................... 12.38
62887...................... 12.39
62892...................... 12.38
62897...................... 12.39
62915...................... 12.29
62920...................... 12.29
62925...................... 12.29
62930...................... 12.17
62930...................... 12.29
62935...................... 12.17
62935...................... 12.29
62940...................... 12.17
62940...................... 12.29
62990...................... 12.11
62990...................... 12.13
62990...................... 12.15
62990...................... 12.17
62990...................... 12.27
62995...................... 12.11
62995...................... 12.13
62995...................... 12.15
62995...................... 12.17
62995...................... 12.27
63000...................... 12.11
63000...................... 12.13
63000...................... 12.15
63000...................... 12.17
63000...................... 12.27
63005...................... 12.11
63005...................... 12.13
63005...................... 12.15
63005...................... 12.17
63005...................... 12.27
63010...................... 12.11
63010...................... 12.13
63010...................... 12.15
63010...................... 12.17
63010...................... 12.27
63015...................... 12.17
63015...................... 12.27
63020...................... 12.17
63020...................... 12.27
63025...................... 12.17
63025...................... 12.27
63030...................... 12.11
63030...................... 12.13
63030...................... 12.15
63030...................... 12.17
63030...................... 12.27
63035...................... 12.11
63035...................... 12.13
63035...................... 12.15
63035...................... 12.17
63035...................... 12.27
63040...................... 12.11
63040...................... 12.13
63040...................... 12.15
63040...................... 12.17
63040...................... 12.27
63045...................... 12.11
63045...................... 12.13
63045...................... 12.15
63045...................... 12.17
63045...................... 12.27
63050...................... 12.11
63050...................... 12.13
63050...................... 12.15
63050...................... 12.17
63050...................... 12.27
63055...................... 12.11
63055...................... 12.13
63055...................... 12.15
63055...................... 12.17
63060...................... 12.17
63060...................... 12.27
63065...................... 12.11
63065...................... 12.13
63065...................... 12.15
63065...................... 12.17
63070...................... 12.27
63075...................... 12.31
63075...................... 12.33
63075...................... 12.35
63080...................... 12.27
63085...................... 12.31
63085...................... 12.33
63085...................... 12.35
63085...................... 12.37
63090...................... 12.31
63090...................... 12.33
63090...................... 12.35
63105...................... 12.31
63105...................... 12.33
63105...................... 12.35
63107...................... 12.38
63110...................... 12.31
63110...................... 12.33
63110...................... 12.35
63112...................... 12.38
63115...................... 12.31
63115...................... 12.33
63115...................... 12.35
63120...................... 12.31
63120...................... 12.33
63120...................... 12.35
63145...................... 12.31
63145...................... 12.33
63145...................... 12.35
63150...................... 12.31
63150...................... 12.33
63150...................... 12.35
63155...................... 12.31
63155...................... 12.33
63155...................... 12.35
63160...................... 12.31
63160...................... 12.33
63160...................... 12.35
63165...................... 12.31
63165...................... 12.33
63165...................... 12.35
63170...................... 12.31
63170...................... 12.33
63170...................... 12.35
63175...................... 12.31
63175...................... 12.33
63175...................... 12.35
63180...................... 12.31
63180...................... 12.33
63180...................... 12.35
63185...................... 12.31
63185...................... 12.33
63190...................... 12.31
63190...................... 12.33
63190...................... 12.35
63195...................... 12.31
63195...................... 12.33
63195...................... 12.35
63200...................... 12.31
63200...................... 12.33
63200...................... 12.35
63200...................... 12.37
63205...................... 12.31
63205...................... 12.33
63205...................... 12.35
63210...................... 12.31
63210...................... 12.33
63210...................... 12.35
63220...................... 12.27
63240...................... 12.31
63240...................... 12.33
63240...................... 12.35
63280...................... 12.27
63822...................... 12.16
63827...................... 12.16
63877...................... 12.40
63882...................... 12.40
64077...................... 12.41
64497........................ 11.7
64497........................ 11.8
64502........................ 11.7
64502........................ 11.8
64607........................ 11.7
64607........................ 11.8
64612........................ 11.7
64612........................ 11.8
64627........................ 11.7
64627........................ 11.8
64642.......................... 2.5
64697...................... 12.38
64697...................... 12.39
64702...................... 12.38
64702...................... 12.39
64707...................... 12.38
64712...................... 12.38
64717...................... 12.38
64722...................... 12.38
64727...................... 12.38
64732...................... 12.38
64732...................... 12.39
64732...................... 12.41
64732...................... 12.43
64737...................... 12.38
64737...................... 12.39
64737...................... 12.41
64742...................... 12.39
64747...................... 12.39
64752...................... 12.39
64757...................... 12.39
64762...................... 12.39
64767...................... 12.41
64772...................... 12.40
64777...................... 12.40
64782...................... 12.40
64787...................... 12.40
64792...................... 12.40
64797...................... 12.43
64832...................... 12.43
64837...................... 12.43
64842...................... 12.43
64847...................... 12.43
64857...................... 12.43
64862...................... 12.43
64902...................... 12.43
64962........................ 3.22
64967........................ 3.22
64977.......................... 5.7
65175.......................... 4.3
65255.......................... 4.3
65285.......................... 4.3
65320.......................... 4.4
65340.......................... 4.8
65345.......................... 4.8
65380........................ 4.10
65550.......................... 4.6
65555.......................... 4.6
65560.......................... 4.6
65565.......................... 4.6
65570.......................... 4.6
65575.......................... 4.6
65580.......................... 4.6
65620.......................... 4.6
65625.......................... 4.6
65630.......................... 4.6
65635.......................... 4.6
65640.......................... 4.6
65680.......................... 4.6
65685.......................... 4.6
65687...................... 12.29
65690.......................... 4.6
65695.......................... 4.6
65700.......................... 4.6
65705.......................... 4.6
65710.......................... 4.6
65715.......................... 4.6
65720.......................... 4.6
65725.......................... 4.6
65730.......................... 4.6
65765.......................... 4.6
65770.......................... 4.6
65775.......................... 4.6
65780.......................... 4.6
65785.......................... 4.6
65790.......................... 4.6
65902.......................... 5.7
65937.......................... 9.4
65942.......................... 9.4
65950.......................... 4.6
65955.......................... 4.6
65960.......................... 4.6
65965.......................... 4.6
65970.......................... 4.6
65975.......................... 4.6
65980.......................... 4.6
65985.......................... 4.6
65990.......................... 4.6
66020.......................... 4.6
66030.......................... 4.6
66035.......................... 4.6
66040.......................... 4.6
66045.......................... 4.6
66050.......................... 4.6
66055.......................... 4.6
66060.......................... 4.6
66065.......................... 4.6
66155.......................... 4.7
66160.......................... 4.7
66175.......................... 4.7
66190.......................... 4.7
66195.......................... 4.7
66200.......................... 4.7
66205.......................... 4.7
66210.......................... 4.7
66215.......................... 4.7
66220.......................... 4.7
66225.......................... 4.7
66230.......................... 4.7
66310.......................... 4.7
66315.......................... 4.7
66320.......................... 4.7
66325.......................... 4.7
66330.......................... 4.7
66335.......................... 4.7
66340.......................... 4.7
66345.......................... 4.7
66350.......................... 4.7
66405.......................... 4.7
66410.......................... 4.7
66415.......................... 4.7
66420.......................... 4.7
66425.......................... 4.7
66430.......................... 4.7
66435.......................... 4.7
66445.......................... 4.7
66450.......................... 4.8
66462.......................... 9.4
66492...................... 12.28
66497...................... 12.28
66512...................... 12.28
66517...................... 12.28
66535.......................... 4.8
66540.......................... 4.8
66550.......................... 4.8
66620........................ 4.11
66625........................ 4.11
66655........................ 4.28
66660........................ 4.28
66665........................ 4.28
66670........................ 4.28
66687........................ 3.10
66687.......................... 3.9
66700........................ 4.28
66705........................ 4.28
66710........................ 4.28
66732...................... 12.41
66732...................... 12.43
66737........................ 3.15
66742........................ 3.15
66747........................ 3.16
66750........................ 4.28
66755........................ 4.28
66760........................ 4.28
66765........................ 4.28
66770........................ 4.28
66775........................ 4.28
66780........................ 4.28
66785........................ 4.28
66795........................ 4.28
66800........................ 4.28
66805........................ 4.28
66807.......................... 1.7
66810........................ 4.28
66830........................ 4.28
66880........................ 4.28
66905........................ 4.28
66920........................ 4.28
Catalog Number Index
Page
No.
Catalog
No.
INDEX
14.14
66947........................ 4.23
66955........................ 4.28
66987.......................... 7.2
66992.......................... 7.2
66997.......................... 7.2
67182........................ 4.23
67187...................... 12.38
67187...................... 12.39
67187...................... 12.41
67187...................... 12.43
67307...................... 11.10
67307........................ 11.6
67312...................... 11.10
67312........................ 11.6
67322........................ 11.6
67327........................ 11.6
67332...................... 12.39
67615.......................... 4.3
67620.......................... 4.3
67625.......................... 4.3
67635.......................... 4.3
67640.......................... 4.3
67645.......................... 4.3
67650.......................... 4.3
67655.......................... 4.3
67657........................ 4.23
67657........................ 4.24
67660.......................... 4.3
67662........................ 4.23
67662.......................... 5.4
67662.......................... 5.5
67665.......................... 4.3
67675.......................... 4.3
67685.......................... 4.3
67880........................ 4.29
67885........................ 4.29
67890........................ 4.29
67900........................ 4.29
67905........................ 4.29
67910........................ 4.29
67915........................ 4.29
67920........................ 4.29
67925........................ 4.29
67935........................ 4.29
67945........................ 4.29
67955........................ 4.29
68160........................ 4.16
68160........................ 4.19
68160........................ 4.23
68160........................ 4.31
68165........................ 4.31
68170........................ 4.31
68175........................ 4.31
68180........................ 4.31
68185........................ 4.31
68195........................ 4.31
68200........................ 4.31
68650.......................... 3.4
68775.......................... 4.5
68780.......................... 4.5
68815........................ 4.16
68842.......................... 9.4
68847.......................... 9.4
68857.......................... 9.4
68862.......................... 9.4
68917...................... 12.11
68917...................... 12.13
68962.......................... 9.4
68967.......................... 9.4
69622.......................... 7.3
69632.......................... 7.3
69642.......................... 7.3
69667.......................... 5.5
69692.......................... 5.5
69707.......................... 9.4
69712.......................... 9.4
69717.......................... 9.4
69762.......................... 9.3
69907.......................... 7.2
69912.......................... 7.2
69982.......................... 3.4
70032...................... 12.11
70032...................... 12.13
70032...................... 12.15
70032...................... 12.17
70032...................... 12.19
70032...................... 12.21
70032...................... 12.23
70032...................... 12.25
70032...................... 12.38
70032...................... 12.39
70032...................... 12.41
70032...................... 12.43
70437.......................... 3.4
70640........................ 4.11
70645........................ 4.11
70652.......................... 9.4
70655........................ 4.11
70677.......................... 8.6
70685.......................... 4.7
70690.......................... 4.7
70695.......................... 4.7
70700.......................... 4.7
70705.......................... 4.7
70710.......................... 4.7
70715.......................... 4.7
70740........................ 4.28
70745........................ 4.28
70750........................ 4.28
70755........................ 4.28
70760........................ 4.28
70830........................ 4.12
70835........................ 4.12
71687........................ 3.11
71692........................ 3.11
71697........................ 3.11
71702...................... 12.10
71722...................... 12.10
71727...................... 12.10
71732...................... 12.10
71757...................... 12.11
71847...................... 12.11
72327........................ 4.12
72332........................ 4.12
72342........................ 4.12
72702...................... 12.11
72862........................ 3.11
72887...................... 13.14
72897...................... 13.14
72902...................... 13.14
72907...................... 13.14
72912...................... 13.14
72922...................... 13.14
72927...................... 13.14
72932...................... 13.14
72937...................... 13.14
72947...................... 13.15
72952...................... 13.15
73162.......................... 3.3
73360.......................... 7.7
73365.......................... 7.7
73370.......................... 7.7
73447........................ 4.23
74012........................ 4.12
74047........................ 4.12
74207.......................... 3.6
74227.......................... 3.3
74685.......................... 3.3
74700.......................... 3.3
74710.......................... 3.3
74720........................ 3.18
74730........................ 3.18
74735........................ 3.18
74946.......................... 9.4
75005.......................... 4.6
75010.......................... 4.6
75015.......................... 4.6
75020.......................... 4.6
75075........................ 4.16
75075.......................... 5.4
75435........................ 4.16
75557.......................... 3.7
75562.......................... 3.7
75567.......................... 3.7
75572.......................... 3.7
75602........................ 4.23
75982.......................... 6.9
75992.......................... 6.9
76017.......................... 6.9
76022.......................... 6.8
76022.......................... 6.9
76027.......................... 6.9
76032.......................... 6.9
76037.......................... 6.9
76042.......................... 6.9
76047.......................... 6.9
76052.......................... 6.9
76057.......................... 6.9
76067.......................... 6.9
76072.......................... 6.9
76077.......................... 6.9
76082.......................... 6.9
76132.......................... 6.9
76137.......................... 6.9
76142.......................... 6.9
76147.......................... 6.9
76152.......................... 6.9
76267.......................... 6.8
76267.......................... 6.9
76272.......................... 6.8
76272.......................... 6.9
76277.......................... 6.9
76282.......................... 6.9
76292.......................... 6.8
76292.......................... 6.9
76297.......................... 6.8
76297.......................... 6.9
76302.......................... 6.9
76305.......................... 4.7
76307.......................... 6.9
76312.......................... 6.9
76315.......................... 4.7
76317.......................... 6.8
76317.......................... 6.9
76322.......................... 6.8
76322.......................... 6.9
76327.......................... 6.9
76332.......................... 6.9
76337.......................... 6.9
76455...................... 12.26
76475...................... 12.26
76485...................... 12.26
76495...................... 12.26
76575...................... 12.29
76597...................... 12.11
76652........................ 10.8
76657........................ 10.8
76662........................ 10.8
76667........................ 10.8
76672........................ 10.8
76677........................ 10.8
76767........................ 4.12
76777.......................... 6.2
76787.......................... 6.2
76792.......................... 6.2
76817...................... 12.11
76817...................... 12.13
76822.......................... 5.3
76822.......................... 5.4
76822.......................... 5.5
76822.......................... 5.6
76822.......................... 5.7
76822.......................... 5.8
76827.......................... 5.3
76827.......................... 5.4
76827.......................... 5.5
76827.......................... 5.6
76827.......................... 5.7
76827.......................... 5.8
77017.......................... 6.2
78347...................... 12.10
79120.......................... 4.3
80475.......................... 7.9
80480.......................... 6.6
80485.......................... 6.6
80500.......................... 6.6
80505.......................... 6.6
80510.......................... 6.6
80515.......................... 6.6
80520.......................... 6.6
81280.......................... 7.7
81490.......................... 6.4
81495.......................... 6.4
81500.......................... 6.4
81505.......................... 6.4
82832...................... 12.38
82837...................... 12.39
82842...................... 12.40
82852...................... 12.40
83037.......................... 8.6
83080.......................... 3.3
83085.......................... 3.3
83140.......................... 3.7
83145.......................... 3.3
83150.......................... 3.3
83165.......................... 3.3
83170.......................... 3.3
83235........................ 3.18
83240........................ 3.17
83290........................ 3.17
83295........................ 3.17
83302.......................... 6.8
83307.......................... 6.8
83317.......................... 6.8
83322.......................... 6.8
83327.......................... 6.8
83337.......................... 6.8
83347.......................... 6.8
83350........................ 7.12
83380.......................... 2.5
83407...................... 12.11
83417...................... 12.11
83435.......................... 4.5
83450.......................... 4.5
83455.......................... 4.5
83460.......................... 4.5
83465.......................... 4.5
83470.......................... 4.5
83475.......................... 4.5
83480.......................... 4.5
83485.......................... 4.5
83557...................... 12.24
83567.......................... 6.8
83572.......................... 6.8
83997.......................... 6.9
84002.......................... 6.9
84007.......................... 6.9
84012.......................... 6.9
84097........................ 4.19
84295...................... 12.36
84325...................... 12.27
84332........................ 4.11
84337........................ 4.11
84417.......................... 9.3
84427.......................... 6.2
84427.......................... 6.3
84532........................ 4.19
84532........................ 4.21
84532........................ 4.22
84532........................ 4.23
84532........................ 4.25
84537........................ 4.19
84537........................ 4.21
84537........................ 4.22
84537........................ 4.23
84537........................ 4.25
85830.......................... 4.7
85835.......................... 4.7
85850.......................... 4.3
85855.......................... 4.3
85865.......................... 4.3
85870.......................... 4.3
85957...................... 12.53
85962...................... 12.53
85987...................... 12.52
86127........................ 3.14
86127........................ 3.15
86902.......................... 1.6
86907.......................... 1.6
86912.......................... 1.6
86917.......................... 1.6
86922.......................... 1.6
86927.......................... 1.6
86932.......................... 1.6
87107.......................... 7.4
87577...................... 12.15
87577...................... 12.17
87582...................... 12.15
87582...................... 12.17
87587...................... 12.15
87587...................... 12.17
87592...................... 12.15
87592...................... 12.17
87597...................... 12.15
87597...................... 12.17
88232.......................... 5.3
88260........................ 3.18
88680........................ 7.13
89400...................... 12.11
89400...................... 12.13
89400...................... 12.27
89405...................... 12.11
89405...................... 12.13
89405...................... 12.27
89410...................... 12.13
89435.......................... 1.4
89440.......................... 1.4
89445.......................... 1.4
90107.......................... 1.3
90117.......................... 1.3
90122.......................... 1.3
90127.......................... 1.3
90702...................... 12.53
90707...................... 12.53
90995.......................... 3.3
91027...................... 12.32
91032...................... 12.32
91037...................... 12.15
91037...................... 12.17
91042...................... 12.15
91042...................... 12.17
91047...................... 12.19
91142........................ 4.19
91192.......................... 6.9
91322........................ 4.19
92095...................... 12.27
92100...................... 12.27
92437.......................... 5.3
92442.......................... 5.3
92447.......................... 5.3
92452.......................... 5.3
92457........................ 4.19
92457........................ 4.21
92457........................ 4.23
92457........................ 4.24
92457........................ 4.27
92460...................... 12.19
92460...................... 12.21
92460...................... 12.23
92460...................... 12.24
92460...................... 12.27
92462........................ 4.19
92462........................ 4.21
92462........................ 4.23
92462........................ 4.24
92462........................ 4.27
92465...................... 12.19
92465...................... 12.21
92465...................... 12.23
92465...................... 12.24
92465...................... 12.27
92467........................ 4.19
92467........................ 4.21
92467........................ 4.23
92467........................ 4.24
92467........................ 4.27
92470...................... 12.19
92470...................... 12.21
92470...................... 12.23
92470...................... 12.24
92470...................... 12.27
92475...................... 12.21
92475...................... 12.23
92475...................... 12.24
92480...................... 12.21
92480...................... 12.23
92480...................... 12.24
92485...................... 12.19
92485...................... 12.21
92485...................... 12.23
92485...................... 12.25
92490...................... 12.19
92490...................... 12.21
92490...................... 12.23
92490...................... 12.25
92495...................... 12.19
Catalog Number Index
Page
No.
Catalog
No.
14.15
INDEX
Catalog Number Index
Page
No.
Catalog
No.
92495...................... 12.21
92495...................... 12.23
92495...................... 12.25
92500...................... 12.19
92500...................... 12.21
92500...................... 12.23
92500...................... 12.25
92505...................... 12.19
92505...................... 12.21
92505...................... 12.23
92505...................... 12.25
92510...................... 12.19
92510...................... 12.21
92510...................... 12.23
92510...................... 12.25
92515...................... 12.19
92515...................... 12.21
92515...................... 12.23
92515...................... 12.25
92520...................... 12.19
92520...................... 12.21
92520...................... 12.23
92520...................... 12.25
92525...................... 12.19
92525...................... 12.21
92525...................... 12.23
92525...................... 12.25
92530...................... 12.19
92530...................... 12.21
92530...................... 12.23
92530...................... 12.25
92535...................... 12.19
92535...................... 12.23
92540...................... 12.19
92540...................... 12.21
92540...................... 12.23
92540...................... 12.25
92545...................... 12.19
92545...................... 12.21
92545...................... 12.23
92545...................... 12.25
92550...................... 12.19
92550...................... 12.21
92550...................... 12.23
92550...................... 12.25
92555...................... 12.19
92555...................... 12.21
92555...................... 12.23
92555...................... 12.25
92555...................... 12.27
92560...................... 12.21
92560...................... 12.23
92560...................... 12.25
92585.......................... 4.6
92590.......................... 4.6
92595.......................... 4.6
92600.......................... 4.6
92605.......................... 4.6
92607...................... 12.15
92610.......................... 4.6
92660.......................... 1.6
92665.......................... 1.6
92670.......................... 1.6
92675.......................... 1.6
92680.......................... 1.6
92682...................... 12.15
92685.......................... 1.6
92687...................... 12.15
92687...................... 12.17
92690.......................... 4.5
92695.......................... 4.5
92700.......................... 4.5
92705.......................... 4.5
92710.......................... 4.5
92715.......................... 4.5
92805...................... 12.21
92805...................... 12.23
92805...................... 12.25
92810...................... 12.21
92810...................... 12.23
92810...................... 12.25
92880...................... 12.21
92880...................... 12.23
92880...................... 12.25
92885...................... 12.21
92885...................... 12.23
92885...................... 12.25
93287........................ 4.21
93387........................ 11.7
93387........................ 11.8
93392........................ 11.6
93492........................ 3.12
93497.......................... 5.3
93557...................... 12.18
93642.......................... 5.3
93707........................ 3.12
93707........................ 3.13
93712........................ 3.12
93712........................ 3.13
93717........................ 3.12
93717........................ 3.13
93722........................ 3.12
93722........................ 3.13
93727........................ 3.12
93727........................ 3.13
93732........................ 3.12
93732........................ 3.13
93737........................ 3.12
93737........................ 3.13
93742........................ 3.12
93742........................ 3.13
93747........................ 3.12
93747........................ 3.13
93757.......................... 5.3
93785.......................... 7.6
93790.......................... 7.6
93907.......................... 1.9
93912.......................... 1.9
93917.......................... 1.9
93922.......................... 1.9
94220........................ 4.29
94492...................... 12.29
94682........................ 3.12
94682........................ 3.13
94687........................ 3.12
94687........................ 3.13
95732...................... 12.18
95737...................... 12.18
95737...................... 12.19
95782.......................... 5.8
95792...................... 12.19
95797...................... 12.19
95802...................... 12.19
95807...................... 12.19
95812...................... 12.19
95822...................... 12.19
95847...................... 12.11
95872.......................... 6.6
95877.......................... 6.6
96032.......................... 6.6
96037...................... 12.11
96037...................... 12.13
96037...................... 12.27
96372.......................... 2.5
96372.......................... 5.8
96397........................ 3.18
96497........................ 4.21
96502........................ 4.21
96507........................ 4.21
96517........................ 4.21
96720.......................... 4.8
96725........................ 4.10
96967...................... 11.34
96982.......................... 5.8
96987.......................... 5.8
96992.......................... 5.8
96997.......................... 5.8
97045........................ 4.19
97045........................ 4.22
97045........................ 4.23
97045........................ 4.25
97050........................ 4.19
97050........................ 4.23
97050........................ 4.25
97065........................ 4.16
97065........................ 4.19
97065........................ 4.23
97065........................ 4.25
97070........................ 4.16
97070........................ 4.19
97070........................ 4.23
97070........................ 4.25
97075........................ 4.16
97075........................ 4.19
97075........................ 4.23
97075........................ 4.25
97080........................ 4.16
97080........................ 4.19
97080........................ 4.23
97080........................ 4.25
97212........................ 3.17
97365........................ 4.16
97365........................ 4.21
97375.......................... 4.4
97415........................ 4.17
97420........................ 4.17
97457...................... 13.16
97462........................ 11.6
97787........................ 3.14
97832........................ 11.7
97832........................ 11.8
97852........................ 11.7
97852........................ 11.8
97882........................ 4.10
97882........................ 4.19
98030...................... 12.31
98030...................... 12.33
98030...................... 12.35
98035...................... 12.31
98035...................... 12.33
98035...................... 12.35
98040...................... 12.31
98040...................... 12.33
98040...................... 12.35
98045...................... 12.31
98045...................... 12.33
98045...................... 12.35
98050...................... 12.29
98055...................... 12.29
98060...................... 12.29
98072...................... 12.11
98072...................... 12.13
98170.......................... 6.7
98175.......................... 6.7
98180.......................... 6.7
98185.......................... 6.7
98190.......................... 6.7
98195.......................... 6.7
98200.......................... 6.7
98205.......................... 6.7
98210.......................... 6.7
98215.......................... 6.7
98220.......................... 6.7
98225.......................... 6.7
98230.......................... 6.7
98235.......................... 6.7
98240.......................... 6.7
98250.......................... 6.7
98255.......................... 6.7
98260.......................... 6.7
98265.......................... 6.7
98270.......................... 6.7
98275.......................... 6.7
98280.......................... 6.7
98290.......................... 6.7
98295.......................... 6.7
98690.......................... 6.7
98695.......................... 6.7
98700.......................... 6.7
98705.......................... 6.7
98710.......................... 6.7
98715.......................... 6.7
98720.......................... 6.7
99545........................ 4.29
INDEX
14.16
TERMS AND CONDITIONS OF SALE
Ridge Tool Company is herein referred to as “Ridge” and the customer
or person or entity purchasing goods or services (hereinafter collectively
referred to as “Goods”) is referred to as the “Buyer”. These Terms and
Conditions, any price list or schedule, quotation, acknowledgment or invoice
from Ridge relevant to the sale of the Goods and all documents incorporated
by specific reference therein, constitute the complete and exclusive state-
ment of the terms of the agreement governing the sale of Goods by Ridge
to Buyer. Buyer’s acceptance of the Goods will manifest Buyer’s assent to
these terms and conditions without variation or addition. Any different or ad-
ditional terms in Buyer’s purchase order or other Buyer documents are hereby
objected to. Ridge reserves the right in its sole discretion to refuse orders.
1. PRICES: Unless a fixed price is quoted, the price at which this order is
accepted is subject to adjustment to Ridge’s price in effect at the time of
order.
2. TERMS OF PAYMENT: Terms are stated on Ridge’s invoice in U.S.
currency. Ridge shall have the right, among other remedies, either to
terminate this agreement or to suspend further performance under this and/
or other agreements with the Buyer in the event Buyer fails to make any
payment when due, which other agreements Buyer and Seller hereby amend
accordingly, or Ridge otherwise deems itself insecure. Buyer shall be liable
for all expenses, including attorneys’ fees, relating to the collection of past
due amounts. Should Buyer’s financial responsibility become unsatisfactory
to Ridge, cash payments or security satisfactory to Ridge may be required by
Ridge for future deliveries and for the goods theretofore delivered. If such
cash payment or security is not provided, in addition to Ridge’s other rights
and remedies, Ridge may discontinue deliveries.
3. SHIPMENT AND DELIVERY: Unless otherwise expressly provided, ship-
ments are made F.O.B. Ridge’s shipping point. Risk of loss or damage and
responsibility shall pass from Ridge to Buyer upon delivery to and receipt by
common carrier. Any claims for shortages or damages suffered in transit are
the responsibility of Buyer and shall be submitted by the Buyer directly to the
carrier. Shortages or damages must be acknowledged and signed for at the
time of delivery. While Ridge will use all reasonable commercial efforts to
maintain the delivery date(s) acknowledged or quoted by Ridge, all shipping
dates are approximate and not guaranteed. Ridge reserves the right to make
partial shipments. Ridge, at its option, shall not be bound to tender delivery
of any Goods for which Buyer has not provided shipping instructions. If the
shipment of the Goods is postponed or delayed by Buyer for any reason,
Buyer agrees to reimburse Ridge for any and all handling and storage costs
and other additional expenses resulting therefrom. All claims for shipping
errors, lost shipments or any other discrepancies must be made within ninety
(90) days or they will be disallowed and deemed waived.
4. Ridge WARRANTY: Ridge covers its products with a LIFETIME WAR-
RANTY against defects in material or workmanship for the life of the tool.
Pipe or drain cleaning tools, rods and cable, are not covered by this warranty
and are considered expendable material. To take advantage of this warranty,
the complete product must be delivered prepaid to RIDGE TOOL COMPANY
or any RIDGE AUTHORIZED SERVICE CENTER. Pipe wrenches and other
hand tools should be returned to place of purchase. Obviously, failures due
to misuse, abuse, or normal wear and tear are not covered by this warranty.
NO OTHER WARRANTY, WRITTEN OR ORAL, APPLIES. No employee, agent,
dealer, or other person is authorized to give any warranty on behalf of Ridge.
Warranted products will be repaired or replaced at our option at no charge
and returned via prepaid transportation. Such replacement or repair is the
exclusive remedy available from Ridge. Ridge is not liable for damage of any
sort, including without limitation incidental and consequential damages.
This warranty shall not apply to any Goods which:
a. Have been repaired or altered outside Ridge’s factory (or Authorized
Service Center) or in any manner so as, in Ridge’s judgment, to affect its
serviceability or proper operation.
b. Have been subjected by persons other than Ridge (or Authorized Service
Center) to improper handling, operation, maintenance, repair or alteration.
c. Have been subjected to misuse, negligence, improper installation or
accident. Ridge’s obligation under this warranty, and the Buyer’s exclusive
remedy for the breach thereof, shall be limited to, at Ridge’s option, repair
or replacement of any allegedly defective Goods or issuance of credit. Ridge
requires the return of any allegedly defective Goods, transportation prepaid,
before honoring any claim. All returned Goods are subject to inspection,
and if examination does not disclose any defect covered by this warranty,
replacement of such Goods or issuance of credit for same will not be
approved.
THE FOREGOING CONSTITUTES RIDGE’S SOLE WARRANTY RESPONSIBIL-
ITY AND BUYER’S EXCLUSIVE REMEDY WHETHER SOUNDING IN TORT,
CONTRACT, STRICT LIABILITY OR OTHERWISE, EXCEPT AS OTHERWISE
EXPRESSLY SET FORTH IN THIS AGREEMENT. THERE ARE NO OTHER
WARRANTIES, EXPRESS OR IMPLIED, WHETHER OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE. RIDGE SHALL NOT
BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY CHARACTER IN CONNECTION WITH THE SALE, RESALE
OR USE OF THE GOODS.
This warranty extends only to persons or organizations who purchase the
Goods from Ridge for resale.
5. LIMITATION OF REMEDY AND LIABILITY: THE SOLE AND EXCLUSIVE
REMEDY FOR BREACH OF ANY WARRANTY HEREUNDER SHALL BE LIMITED
TO REPAIR, CORRECTION, REPLACEMENT OR CREDIT UNDER SECTION 4.
RIDGE SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN
PERFORMANCE, AND IN NO EVENT, REGARDLESS OF THE FORM OF THE
CLAIM OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT, INFRINGE-
MENT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR OTHERWISE),
SHALL RIDGE’S LIABILITY TO BUYER AND/OR ITS CUSTOMERS EXCEED
THE PRICE PAID BY BUYER FOR THE SPECIFIC GOODS GIVING RISE TO THE
CLAIM OR CAUSE OF ACTION, AND BUYER SHALL INDEMNIFY RIDGE FOR
ANY DAMAGES IN EXCESS THEREOF. BUYER AGREES THAT IN NO EVENT
SHALL RIDGE’S LIABILITY TO BUYER AND/OR ITS CUSTOMERS INCLUDE
INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, WHICH ARE
WAIVED BY BUYER AND AS TO WHICH BUYER SHALL INDEMNIFY RIDGE.
The term “consequential damages” shall include, but not be limited to, loss
of anticipated profits, business interruption, loss of use of revenue, cost of
capital or loss of or damage to property or equipment, or loss of reputation.
Further, Buyer shall indemnify and hold Ridge harmless from any liability to
Buyer, Buyer’s employees, workers, contractors or any other persons arising
out of Buyer’s, or any other persons’ use of the Goods. All instructions and
14.17
INDEX
warnings supplied by Ridge will be passed on to those persons who use the
Goods. Ridge’s Goods are to be used in their recommended applications and
all warning labels adhered to the Goods by Ridge shall be left intact.
6. EXCUSE OF PERFORMANCE (FORCE MAJEURE): Ridge shall not be liable
for delays in performance or for non-performance due to acts of God; acts
of Buyer; war; fire; flood; weather; sabotage; strikes, labor disputes, civil
disturbances or riots; governmental requests, restrictions, allocations, laws,
regulations, orders or actions; unavailability of or delays in transportation;
default of suppliers; or unforeseen circumstances or events beyond Ridge’s
reasonable control. Deliveries or other performance may be suspended for
an appropriate period of time or cancelled by Ridge upon notice to Buyer in
the event of any of the foregoing, but the balance of this agreement shall
otherwise remain unaffected.
If Ridge determines that its ability to supply the total demand for the Goods,
or to obtain material used directly or indirectly in the manufacture of the
Goods, is hindered, limited or made impracticable due to causes set forth
herein, Ridge may allocate its available supply of the Goods or such material
(without obligation to acquire other supplies of any such Goods or materials)
among itself and its purchasers on such basis as Ridge determines to be
equitable without liability for any failure of performance which may result
therefrom.
7. CHANGES: Ridge reserves the right to change designs and specifications
for standard Goods without prior notice to Buyer, but not with respect to
custom Goods being made for Buyer. Ridge shall have no obligation to install
or make such change in any Goods manufactured prior to the date of such
change.
8. ASSIGNMENT: Buyer shall not assign its rights or delegate its duties
hereunder or any interest herein without the prior written consent of Ridge,
and any such assignment, without such consent, shall be void.
9. INSTALLATION: Buyer shall be responsible for receiving, inspecting, test-
ing, storing, installing, starting up and maintaining all Goods.
10. INSPECTION/TESTING: Buyer, at its expense, agrees that it will promptly
inspect the Goods upon receipt thereof, and in no event later than thirty
(30) days from the date of receipt of the Goods. Buyer shall deliver to Ridge
within fifteen (15) days of inspection, but in no event later than forty-five
(45) days from the date of receipt of the Goods, written notice of any and
all deficiencies, defects, variations from specifications or complaints of any
kind with respect to the quantity, quality, condition, shipment, performance,
price or appearance of the Goods so received by Buyer. In the event no such
written notice is received by Ridge, Buyer shall be deemed conclusively to
have inspected and accepted all such Goods unconditionally and to have
waived any and all rights and claims, including without limitation any right
to reject the Goods or to claim damages in respect thereof. Buyer may not
return Goods without first advising Ridge of the reasons therefore, obtaining
from Ridge a material authorization number and observing such instructions
as Ridge may give in authorizing such return.
11. SERVICES: If this agreement requires Ridge to perform or provide any
services, Ridge (including without limitation its successors, assigns, agents
or any person or entity acting at Ridge’s direction) shall not be responsible
for any damages, claims, liabilities or expenses of any nature arising out of
such services.
12. U.S. EXPORT CONTROL LAWS: All Goods sold to Buyer by Ridge here-
under are subject to U.S. Export Control Laws. Buyer hereby agrees not to
re-sell or divert any goods contrary to such laws.
13. SELLER/CONTRACTOR shall comply with all applicable federal, state or
local laws, rules, regulations, or orders. Seller/Contractor shall comply with
Executive Order 11246, as amended by the Executive Order 11375, and the
applicable provisions of the Office of Federal Contract Compliance Programs
(OFCCP), 41 CFR Part 60, which are incorporated herein by this reference.
14. MISCELLANEOUS: These terms and conditions supersede all other
communications, negotiations and prior oral or written statements regarding
the subject matter hereof. No change, modification, rescission, discharge,
abandonment, or waiver of these terms and conditions shall be binding upon
Ridge unless made in writing and signed on its behalf by its duly authorized
representative. No conditions, usage or trade, course of dealing or perfor-
mance, understanding or agreement purporting to modify, vary, explain, or
supplement these terms and conditions shall be binding unless hereafter
made in writing and signed by Seller. No modification shall be effected by
Ridge’s receipt or acceptance of Buyer’s purchase orders, shipping instruc-
tion forms, or other documentation containing terms at variance with or in
addition to those set forth herein, all of which are objected to by Ridge. No
waiver by Ridge with respect to any breach or default of any right or remedy
and no course of dealing, shall be deemed to constitute a continuing waiver
of any other breach or default of any other right or remedy, unless such
waiver be expressed in writing and signed by Ridge. All typographical or
clerical errors made by Ridge in any quotation, acknowledgment or publica-
tion are subject to correction.
The validity, performance, and all other matters relating to the interpretation
and effect of this agreement shall be governed by the laws of the state of
Ohio without regard to its conflict of law principles. Buyer and Ridge agree
that the proper venue for all actions arising in connection herewith shall be
only in Ohio and the parties agree to submit to such jurisdiction. No action,
regardless of form, arising out of transactions relating to this contract, may
be brought by either party more than two (2) years after the cause of action
has accrued. Further, the United Nations Convention on the International
Sale of Goods (1980) (as amended from time to time) shall not apply to this
Purchase Order or any transactions relating thereto.
Printed in U.S.A. 514-47.5M ©2014 RIDGID, Inc. All trademarks shown are the property of their respective owners. 999-997-517.10 V7
