105269 Catalog
2014-10-17
: Pdf 105269-Catalog 105269-Catalog 096359 Batch10 unilog
Open the PDF directly: View PDF 
.
Page Count: 40
| Download | |
| Open PDF In Browser | View PDF |
Your total utility solution
Catalog
60
SIXTIETH
1952 - 2012
ANNIVERSARY
To view the catalog on a smartphone scan the barcode.
www.stateelectric.com
Welcome to State Electric Supply
Company’s quick reference Utility
catalog. This catalog is presented as a
tool for our valued customers providing a
simple, easy solution for procurement of
your Utility needs. It is not intended to be
a representation of our complete Utility
offering. Should you require additional
products that are not represented here,
please contact your State Electric Supply
Company Utility Sales Representative.
Thank you for your continued support.
Sincerely,
Your Utility Sales Team
State Electric Supply Company
Online Ordering
To Request a User
Name/Password
1. Visit www.stateelectric.com
2. Click “E-Business Center”
3. Click “Log In”
4. Click “Request User Name/Password”
and complete the request form. Your
request will be processed within 24-48
hours. A confirming email will be sent
containing your User Name/Password.
To Order Online
1. Visit www.stateelectric.com
2. Click “E-Business Center”
3. Click “Log In”
4. Enter User Name/Password
FOLLOW US ONLINE
facebook.com/stateelectric
twitter.com/State_Electric
All information in this catalog is presented solely as a guide to
product selection and is believed to be reliable. All printing errors are
subject to correction in subsequent releases of this catalog. Although
State Electric Supply Company has taken precautions to ensure the
accuracy of the product specifications at the time of publication, the
specifications of all products contained herein are subject to change
without notice.
Adapters 4
Arms 4
Bands
4-5
Bayonets 5
Bolts
6-8
Braces
8-9
Brackets
9-13
Clamps
13-15
Clevis
15-16
Clips
17
Eyenuts
17
Eyes
18
Guards & Straps
18
Guards
19
Guy Markers
19-20
Hangers
21
Hooks
21
Irons
22
Links
22
Nuts
22-23
Pins
23-25
Plates
26
Racks
27-28
Rods
28
Screws
29
Shackles
29
Sidewalk Guy Fittings
29
Sleeves
30
Spacers
30
Steps
30
Straps
31
Supports
31
Thimbles
31
Tongues
31
Washers
32
Wireholders
32-33
Poleline Hardware Diagram
34
Definitions
35
Index
36-38
Locations
39
www.stateelectric.com
Issue 1 01.25.2012
UTILITY
table and contents
ADAPTERs
THIMBLE
Used to change 1-inch pin insulator thread to
13/8-inch pin insulator thread.
Hubbell Power Systems
MacLean Power Systems
4257
J4023
Exterior Thread Diameter
1 3/8
Dimensions (in.)
Interior Thread Diameter
1
Overall Length
2 1/4
Arms
cable extension
Hubbell Power Systems
7920
7921
For suspending cables at a distance from the
pole, a No. 7903 Cable Suspension Clamp is
usually used under the arm attached through
the center slot to a 5/8” machine bolt with a
washer under the bolt head. Cable extension
from the pole is 23” for No. 7920, 41” for
No. 7921. Cable clamp with attachment bolt
and pole mounting bolts, or lag screws, must be
ordered separately.
MacLean Power Systems
J7920
J7921
BANDS
UTILITY
POLE ACCESSORIES
Deadend clevis has 13/16” hole to match
rectangular holes in bands, and is attached
with cone head bolt. Guy clips made in two
pieces: top, 5/16” x 2 1/2” steel; bottom,
3/16” x 2 1/2” steel. A 3/4” x 2 1/2”
machine bolt with cotter pin fastens thimble.
Hubbell Power Systems
6278
PS6280
P451016
4
MacLean Power Systems
N/A
N/A
N/A
www.stateelectric.com
BANDS
POLE ADJUSTABLE
POLE ADJUSTABLE
heavy style
Use steel Pole Bands on wood poles.
Take-offs for guy and insulation
attachments can be made by using
connecting links (see below). Bands are
shipped unassembled.
These are 3/16” x 4” flat steel bands,
shipped assembled with one 3/4 x 4”
curved bolt and one 3/4 x 21/2” cone
head bolt. Hot dip galvanized. Extra
cone head bolts, for attaching deadend
clevises and guy clips, must be ordered
separately. One to eight attachments can
be made from each pole band.
Hubbell Power Systems
6276
6277
MacLean Power Systems
J6280
J6270
POLE SECONDARY RACK
For attaching secondary racks to tubular
metal poles. Bands are equipped with
5/8” x 2” carriage bolts for attaching the
racks, and 1/2” x 15/8” oval-shoulder
clamp bolts for tightening bands on pole.
Hot dip galvanized 1/4” x 11/2” steel.
Made in two styles, the single type for
attaching one rack and the double type
for two racks.
Hubbell Power Systems
C2030194
C2030197
C2030200
MacLean Power Systems
J6644
J6641
J6684
Single Type
Hubbell Power Systems
636412
PS6366
PS6367
PS6368
MacLean Power Systems
N/A
N/A
N/A
N/A
Pole O.D. (in.)
5
6 3/8
7 5/8
8 5/8
DOUBLE Type
Hubbell Power Systems
637412
PS6376
PS6377
PS6378
MacLean Power Systems
N/A
N/A
N/A
N/A
Pole O.D. (in.)
5
6 3/8
7 5/8
8 5/8
POLE connecting links
Hubbell Power Systems
C2030183
MacLean Power Systems
N/A
UTILITY
Designed for use with 4-Way Adjustable
Pole Bands, above. For insulator or guy
attachments. Has a 1 1/4” diameter hole
on one end and 15/16” holes on the other
end.
Steel Size (in.)
1/4 x 3
Length (in.)
7 1/2
BAYONETS
GROUND WIRE
SUPPORTS, SHIELD WIRE
For supporting overhead ground wire
on wood or steel poles. Bayonets have
an 11/16” hole and an 11/16” polemounting slot to allow for inaccuracy in
boring holes. Holes at top of bayonet
allow use of groundwire clamps (Not
included). Bolts used to fasten corner
bayonets together are included. Polemounting bolts and ground-wire clamps
are not included.
Hubbell Power Systems
5436
5466
PS5484
www.stateelectric.com
MacLean Power Systems
Angle Size (in.)
J1130
2 x 2 x 1/4
J1132
2 1/2 x 2 1/2 x 1/4
N/A
3 x 3 x 1/4
5
BOLTS
CARRIAGE
Carriage Bolts have square nuts, finished
points and rolled threads. Standard heads
have square shoulders. Open-hearth steel.
3/8” dIAMETER
Hubbell Power Systems
8634
863412
8635
8636
8637
MacLean Power Systems
J8634
J8634-1/2
J8635
J8636
J8637
1/2” DIAMETER
Hubbell Power Systems
8645
864512
8646
8647
MacLean Power Systems
J8645
J8645-1/2
J8646
J8647
DOUBLE-ARMING full thread
Bolts permit replacement ease in double arms
and offer added flexibility of use. Cone type
point for easy starting and driving-out without
damage to threads. Each bolt provided with
four square nuts.
UTILITY
6
1/2” shank DIAMETER
Hubbell Power Systems
8846
8848
MacLean Power Systems
N/A
N/A
3/8” dIAMETER
Hubbell Power Systems
8634
863412
8635
8636
8637
MacLean Power Systems
J8634
J8634-1/2
J8635
J8636
J8637
1/2” DIAMETER
Hubbell Power Systems
8645
864512
8646
8647
MacLean Power Systems
J8645
J8645-1/2
J8646
J8647
CLEVIS
For supporting crossarm suspension
insulator strings. Cotter bolt is 23/4” long
and comes with cotter pin and hex nut.
Clevis Bolts are drop-forged steel.
Hubbell Power Systems
15808
15810
15812
15814
15828
15830
15832
15834
MacLean Power Systems
J7808
J7810
J7812
J7814
N/A
N/A
N/A
N/A
DOUBLE-ARMING EYE
Bolts have a cone type point and are
threaded to within 2” of the 11/2” x 2”
eye. Three Square Nuts. Drop-forged
steel.
5/8” DIAMETER
Hubbell Power Systems
19784
19786
19788
19790
19792
MacLean Power Systems
N/A
N/A
N/A
N/A
N/A
SCREW EYE
Gimlet-point lag-screw thread.
Hubbell Power Systems
29930
C2050094
8777
www.stateelectric.com
MacLean Power Systems
J8930
N/A
N/A
machine
Are also called crossarm bolts or through
bolts. Bolts have rolled threads and one
square nut. Bolts six inches or longer have
cone-type points.
3/8” DIAMETER
Hubbell Power Systems
8604
860412
8605
860512
MacLean Power Systems
J8604
J8604-1/2
J8605
N/A
1/2” DIAMETER
Hubbell Power Systems
870112
870412
8705
8706
MacLean Power Systems
J8701-1/2
N/A
J8705
J8706
8707
8708
8709
8710
8712
8714
J8707
J8708
J8709
J8710
J8712
J8714
OVALEYE
Bolts with 5/8” and 3/4” shanks have
11/2” x 2” ovaleyes. Drop-forged,
galvanized steel bolts have cone type
points and rolled threads.
1/2” sHANK DIAMETER 7/16 X 1 1/4” X 1 5/8” OVALEYE
Hubbell Power Systems
MacLean Power Systems
29939
N/A
29943
N/A
5/8” sHANK DIAMETER 9/16 X 1 1/2” X 2” OVALEYE
Hubbell Power Systems
MacLean Power Systems
29956
J9406
29958
J9408
29959
J9409
29960
J9410
29962
J9412
29964
J9414
29966
J9416
29968
J9418
29970
J9420
3/4” sHANK DIAMETER 5/8 X 1 1/2” X 2” OVALEYE
Hubbell Power Systems
MacLean Power Systems
29978
J9508
29980
J9510
29982
J9512
29984
J9514
29986
J9516
29988
J9518
5/8” DIAMETER
Hubbell Power Systems
8805
8806
8807
8808
8809
8810
8812
8814
8816
8818
8820
8822
8824
MacLean Power Systems
J8805
J8806
J8807
J8808
J8809
J8810
J8812
J8814
J8816
J8818
J8820
J8822
J8824
3/4” DIAMETER
Hubbell Power Systems
8908
8910
8912
8914
8916
8918
8920
8922
8924
8926
MacLean Power Systems
J8908
J8910
J8912
J8914
J8916
J8918
J8920
J8922
J8924
J8926
7/8” DIAMETER
Hubbell Power Systems
C2050254
C2050256
C2050258
C2050255
C2050257
MacLean Power Systems
J9064
J9068
J9072
J9066
J9070
www.stateelectric.com
UTILITY
BOLTS
7
BOLTS
THIMBLEYE
Hubbell Power Systems
Straight Bolt Angle Bolt
DG1F8
DG4F8
5510
5010
5512
5012
5514
5014
5516
5016
DG1F18
N/A
N/A
5110T
5612
5112T
5614
5114T
Contoured eye keeps guy strand from
kinking, bending, or spreading. Dropforged steel. Cone-type points. Eyes of
angle bolts are offset 45 degrees.
upset double
upset SINGLE
Includes square nut, round washer, and cotter key on short end and Square nut and
M-F locknut on long end.
Hubbell Power Systems
7826
7828
7830
7832
7834
MacLean Power Systems
Thread
Length (in.)
Length (in.)
Straight Bolt Angle Bolt
J8051
J8151
5/8 x 8
4
J8051
J8151
5/8 x 10
4
J8052
J8152
5/8 x 12
6
J8053
J8153
5/8 x 14
6
J8054
J8154
5/8 x 16
6
J8055
N/A
5/8 x 18
6
N/A
J8161
3/4 x 10
4
J8062
J8162
3/4 x 12
6
J8063
J8163
3/4 x 14
6
Used in rural secondary construction. Has
5/8” thread diameter.
Hubbell Power Systems
7741
774112
7742
7743
7744
MacLean Power Systems
J2394
J9120
J2396
J2398
J9134
MacLean Power Systems
J2342-1/2
J2343-1/2
J2344-1/2
J2346-1/2
J2348-1/2
BRACES
CROSSARM ALLEY ARM
UTILITY
Used for side-arm construction. Furnished
with lineman’s steps.
Hubbell Power Systems
MacLean Power Systems
Length (ft.)
Angle Size (in.)
6979
6984
T2030367
J1522
J1525
N/A
5
7
10
1 3/4 x 1 3/4 x 3/16
1 3/4 x 1 3/4 x 3/16
2 x 2 x 1/4
side arm
Used for side-arm construction. Furnished
with lineman’s steps.
Hubbell Power Systems
6999
8
MacLean Power Systems
J1422
www.stateelectric.com
Holes (in.)
Arm Attach Pole Attach
9/16
9/16
9/16
11/16
11/16
11/16
BRACES
CROSSARM V
Furnished with 9/16” holes for crossarm
mounting. 11/16” holes for pole
mounting. The “1” series has a 9/16” x
1” slot in place of the 9/16” diameter
crossarm mounting holes.
Hubbell Power Systems
6940
6941
6942
6948
6953
6955
69401
69421
MacLean Power Systems
J1506
J1514
J1508
J1507
J1510
J1512
J1506
J1508
Size of Angle
1 1/2 x 1 1/2 x 3/16
1 1/2 x 1 1/2 x 3/16
1 1/2 x 1 1/2 x 3/16
1 1/2 x 1 1/2 x 3/16
1 3/4 x 1 3/4 x 3/16
1 3/4 x 1 3/4 x 3/16
1 1/2 x 1 1/2 x 3/16
1 1/2 x 1 1/2 x 3/16
CROSSARM Flat
7 x 32 x 1 7/32 Braces (in.)
Hubbell Power Systems
MacLean Power Systems
7020
N/A
7026
J7126
7028
J7128
7030
J7130
7032
J7132
1/4 X 1 1/4 Braces (in.)
Hubbell Power Systems
7126
7128
7130
7132
C2030233
T2030459
T2060398
MacLean Power Systems
J7126
J7128
J7130
J7132
N/A
N/A
N/A
UTILITY
Have rounded ends and are punched at
one end with a 9/16” hole, with a 7/16”
hole at the other end. Holes punched
1-inch from brace end to center of hole.
BRACkets
CORNER CONSTRUCTION
Used for small angles to deadend on
pole. Has 11/2” x 2” drop-forged eyes,
12” extension. Mounting eyes are at right
angles to take-off eye.
Hubbell Power Systems
MacLean Power Systems
5728
C2060480
J7936
J7935
Dimensions (in.)
Steel Size Mounting Distance
12
3/4 Rd.
12
5/8 Rd.
www.stateelectric.com
9
BRACKETS
CUTOUT, ARRESTERS &
POTHEAD
CUTOUT, ARRESTERS &
POTHEAD
These brackets offer a wide variety
of one, two or three unit mounting
applications. Completely assembled
brackets are available as well as
individual parts for field adaptation. The
one and two unit brackets can be mounted
with the vertical member running either up
or down the pole.
Hubbell Power Systems
C2060189
C2060190
C2060192
C2060193
This “D” type bracket is used to mount
cutouts and/or arresters directly to
the pole. Three brackets may be used
for three-phase application. Can be
conveniently mounted or removed without
removing bolts. Clean, quick mounting for
single-phase application without crossarm
or special pole bands.
MacLean Power Systems
N/A
N/A
J26190
N/A
Galvanized 3/8” x 2” steel, 7.25 or
12-inches of clearance to the face of the
pole. Mounting holes accept the L portion
of the NEMA cutout crossarm bracket. A
grounding lug connector is provided (on
C2090299/J24665 only), along with
two 3/8” x 11/2” carriage bolts with nut,
round washer and lock washer.
Hubbell Power Systems
C2060299
C2060547
MacLean Power Systems
J24655
N/A
CUTOUT & ARRESTER
Complete with bolts, nuts and washers.
Crossarm brackets adjust to fit arms from
3” x 4” to 4” x 5”.
UTILITY
Hubbell Power Systems
MacLean Power Systems
C2060127
C2060283
C2060280
C2060236
J24515
J24712
J24711
N/A
Clearance Dimensions (in.)
Crossarm to Mtg. Bolt
2 9/16
2 5/8
5 1/4
Pole to Mtg. Strap 5”
crossarm bracket
extension
Where obstructions are to be overcome
and where proper clearances are
required, this bracket is fastened to the
pole for mounting secondary racks. Made
of hot-galvanized 9-gauge steel, it is
equipped with a 5/8” x 2” carriage bolt.
Curved back is 3” wide.
Hubbell Power Systems
PS2355
2357
10
MacLean Power Systems
N/A
J2357
Dimensions (in.)
Mounting Holes
Center
11/16
11/16
Side
9/16
9/16
www.stateelectric.com
Extension
6
9
pole bracket
BRACkets
NEUTRAL OFFSET
Designed to support the neutral wire
well away from the pole. Used primarily on rural open wire construction where
long spans are common and additional
clearance or climbing space is required.
Full-threaded 25” rod; 5/8” pin accepts
ANSI 53-2 spool insulator.
Hubbell Power Systems
MacLean Power Systems
C2060004
J2552
Arm Length
15
Dimensions (in.)
Pole Mounting Hole Diameter
Rod Diameter
5/8
1/2
NEUTRAL WIRE
Used where a neutral wire is used as one
of a 3-phase circuit. Has 11/16” mounting
slots. Non-insulating.
Hubbell Power Systems
MacLean Power Systems
Wire Size (in.)
Length Pole
Bearing Surface (in.)
3470
NWB5
1/2 or under
2 1/2
POLE TOP
Hubbell Power Systems
MacLean Power Systems
2157
N/A
Hole Diameter
11/18
Dimensions (in.)
Overall Height Hole Spacing
10 1/2
8
Steel Size
1/4 x 3
UTILITY
This bracket can be used with two poletop pins to give additional clearance
from the pole. It is mounted to the pole
with 5/8” double arming bolts, extending
the spread between insulators by 4”
in addition to the pole diameter. The
bottom slot is 11/16” x 11/4” for easy
adjustment. Bracket pipe spacers may be
required.
Post insulator
Curved base
This bracket can be used for mounting
distribution post-type insulators from 15
kV to 34.5 kV on the side of the pole.
The base has a pole-shape back for
convenient installation. Brackets can be
placed in a phase-overphase arrangement
or can be mounted on opposite sides of
the pole for “armless” construction.
Insulators not included.
Hubbell Power Systems
C2060009
C2060010
C2060011
MacLean Power Systems
J25256-2
N/A
N/A
www.stateelectric.com
11
BRACkets
post insulator
Side mounted
The bracket is formed of high-quality
3/8” x 21/2” bar. It can be utilized to
mount distribution post insulators from 15
kV to 34.5 kV.
Hubbell Power Systems
MacLean Power Systems
Pole Mounting Bolts (in.)
13/16” Hole 11/16” Hole 13/16” Hole 11/16” Hole
C2060209
C2060162
16919
N/A
J25256-2
SFHJB-85-5-30
N/A
N/A
Insulator Stud Bolts (in.)
Two 5/8
Two 5/8
3/4
3/4
post insulator
uni-brackets
Chance Uni-Brackets are a cleanappearing, low-cost method of mounting
three post-type insulators atop a pole
completely eliminating the crossarm. The
brackets can be installed on the pole in
less than five minutes, requiring only two
3/4” bolts for attachment. Uni-Brackets fit
poles having a pole-top diameter from 6”
to 81/2”. Slot on top is 11/16” x 21/4”.
The brackets can be adapted to a variety
of distribution construction using post-type
insulators from 15 through 34.5 kV.
Hubbell Power Systems
MacLean Power Systems
Insulator Stud Bolts (in.)
9183
N/A
5/8
UTILITY
SERVICE DEADEND
Attaches to 11/4” through 3” diameter service
masts. Front strap is rounded to prevent
damage to bail of the service clamp. Square
hole at end of the front slot captures the
carriage bolt head during installation and
prevents slippage after installation.
Hubbell Power Systems
C2060169
MacLean Power Systems
J0590
Adjustments (in.)
1 3/4 - 3
telephone house
Used where the pole lead attaches to the
building at an angle or to carry leads
around the corner of a building. Used with
porcelain spool insulator and a bolt which
are not included.
12
Hubbell Power Systems
MacLean Power Systems
8205
J2584
Mounting Holes
9/32
Dimensions (in.)
Insulator Holes
13/32
www.stateelectric.com
Steel Size
1/2 x 3/16
BRACkets
Transformer
secondary lead
The Chance Secondary Lead Transformer
Bracket is a device that serves as a
support for secondary lead wires. Made
to clamp over the rolled edge at the
bottom of the transformer, it fits all
popular distribution transformers with
steel tank. Clamp and bolt are hot dip
galvanized steel. Bolt end has a plastic
cap to prevent scratching the outer surface
of the transformer. Furnished as a bracket
or with insulator assembled.
Hubbell Power Systems
MacLean Power Systems
9113S
9114S
J6765A
J6765
Dimensions (in.)
Size of Insulator Bolt
Steel Size of Clamp
1/2 x 5
5/8 x 6
5/16 x 1 1/4
5/16 x 1 1/4
clamps
Bonding Clamps make a dependable
mechanical and electrical pressure contact
between guy strand and anchor rod, when
the guy is part of the grounding system.
Used on Thimbleye and Angle-Thimbleye
bolts to keep hardware-to-guy contacts
tight. Also used to prevent excessive wear
on guy strands and protect galvanizing.
Maintains electrical continuity.
for power installed screw anchors
Hubbell Power Systems
MacLean Power Systems
G5067
G5068
G5069
C2030148
J26714
J26715
J26716
N/A
expanding anchors & rock anchors
Hubbell Power Systems
MacLean Power Systems
G5060
G5061
G5063
J3230
J3231
J3233
for no-wrench screw anchors
Hubbell Power Systems
MacLean Power Systems
G5065
G5063
J3230
J3233
Rod Type and Size (in.)
UTILITY
bonding
Thimbleye, 1/2 & 5/8
Thimbleye, 3/4 & 1
Twineye, 5/8, 3/4 &1
Tripleye, 5/8, 3/4 & 1
Rod Type and Size (in.)
Thimbleye, 1/2 & 5/8
Twineye, 5/8, 3/4 &1
Tripleye 3/4 & 1
Rod Type and Size (in.)
Thimbleye, 1/2 & 5/8
Tripleye 3/4 & 1
www.stateelectric.com
13
clamps
GROUND
Connection is soldered to the cable
sheath and mechanically clamped to the
messenger wire. The bolt can be removed
so that the clamp can be dropped over
the messenger.
Hubbell Power Systems
7956
MacLean Power Systems
N/A
Steel Size (in.)
3/16 x 1 3/4
Length (in.)
1 3/4
Bolt Size (in.)
1 3/4
GROUND wire
Ground Wire Clamp is used to attach
ground or static wires to bayonets. The
Ground Wire Clamp is 1/2” J-Bolt which
fits into two holes at top of bayonet.
Hubbell Power Systems
5450
MacLean Power Systems
N/A
Bayonet Hole Spacing (in.)
15/16
guy
Parallel grooves trap strand tightly without
marring. Plate halves align evenly for
easy application. Each bolt has a shoulder
to prevent turning while tightening.
5/8” Clamp bolts
UTILITY
Hubbell Power Systems
MacLean Power Systems
No. of
Bolts
Length
6460
6461
6462
N/A
J931
N/A
3
3
2
6
6
4
Hubbell Power Systems
MacLean Power Systems
No. of
Bolts
Length
6448
6449
6450
J1030
J929
J930
2
3
3
3 3/8
4
6
Dimensions (in.)
Width
Accepts Strand Size
2 1/8
1 21/32
1 21/32
3/8 thru 5/8
5/16 thru 1/2
5/16 thru 1/2
1/2” Clamp bolts
Dimensions (in.)
Width
Accepts Strand Size
1 9/16
1 9/16
1 9/16
1/4 thru 7/16
1/4 thru 7/16
1/4 thru 7/16
guy offset
This two-bolt guy clamp with curved
clamping member provides a more
positive hold on the guy strand. Available
with 1/2” or 5/8” bolts.
14
Hubbell Power Systems
MacLean Power Systems
6409
6410
J926
J927
Length
Dimensions (in.)
Width
Strand Size
3 1/4
4
1 1/2
1 5/8
www.stateelectric.com
3/16 thru 5/16
5/16 thru 1/2
CLAMPS
LASHING WIRE
TYPE E
Clamp is fitted with a special clamp bolt
formed with a shoulder to prevent turning
while tightening. Both ends of the 1/4”
bolt are peened to prevent loss of nuts
during shipment or handling.
Hubbell Power Systems
MacLean Power Systems
9000
N/A
Dimensions (in.)
Width
Strand Size
Length
1
1
1/4 thru 7/16
suspension
Clamps are used with through bolts to
support cable at poles. Through bolt also
serves as clamping member. One or more
nuts and/or washers are used between the
pole and clamp for required spacing.
MacLean Power Systems
Type
7901
7902L
7902R
7903
J1095
J7910A
J7901
J1096
J25088.1
RCEL-68-1125
1-Bolt Straight Suspension
3-Bolt Angle Suspension
3-Bolt Angle Suspension
3-Bolt Straight Suspension
3-Bolt Straight Suspension
3-Bolt Straight Suspension
7903L
7904
Length
2 1/2
7
7
5 5/8
5 5/8
5 5/8
Dimensions (in.)
Center Hole Diameter
11/16
11/16
13/16
11/16
11/16
13/16
Accommodates
Strand Size
1/4 thru 7/16
1/4 thru 7/16
1/4 thru 7/16
1/4 thru 7/16
1/4 thru 7/16
5/16 thru 3/8
CLEVIS
DEADENDING
UTILITY
Hubbell Power Systems
Used for attaching deadend insulators
and guys with extension links. Clevises
have 5/8” cotter bolts.
Hubbell Power Systems
MacLean Power Systems
455
J455
Extension
3 3/4
Dimensions (in.)
Mounting Hole Diameter Throat Clearance
13/16
www.stateelectric.com
5/8
Steel Size
5/8
15
CLEVIS
insulators
Hubbell Power Systems
468
469
0340
0341
0352
0322
0337
0327
0344
C2070024
MacLean Power Systems
J093
J93
J0342
J0313
J0322
J1395
J1399
J1300
J0344
J251
469/j93
468/J093
0341/J0313
0340/J0342
0322/J1395
UTILITY
0344/j0344
Hubbell Power Systems
8795
iNSULATED (LESS INSULATORS)
MacLean Power Systems
N/A
Hubbell Power Systems
1948M
1948C
THIMBLE
STANDARD
Combines a steel-attachment clevis with
a wire-rope thimble. Thimble has 2”
diameter wire groove for deadending
strand and swings free for flexibility.
Hubbell Power Systems
MacLean Power Systems
573
J575
c2070024/j251
SWINGING CLEVIS
CROSS MOUNTING BRACKET
For attachment over crossarm with a 1/2”
carriage bolt installed vertically through the
arm, or a 3/8” lag screw.
16
0337/j1399
Dimensions (in.)
Steel Gauge Cotter Bolt Diameter
10
5/8
www.stateelectric.com
MacLean Power Systems
J1626
J1614
CLips
wire rope guy wire
Body of each clip is galvanized ductile
iron designed to fit the strand, which is
protected by smooth-rounded contact
surfaces. Bolts are made of high-strength
steel.
Hubbell Power Systems
6480
6481
6482
MacLean Power Systems
J1048
J1049
J1050
Size of Strand (in.)
1/4
5/16
3/8
eyenuts
standard
Most commonly used for deadending,
back-guying, and attaching pole head
guys on the threaded ends of crossarm
bolts.
Hubbell Power Systems
6500
6501
6502
6503
MacLean Power Systems
J1091
J1092
J1092
J1093
Bolt Diameter (in.)
1/2
5/8
5/8
3/4
thimbleye
Hubbell Power Systems
6510
6511
MacLean Power Systems
J6510
J6511
UTILITY
For attaching to thru-bolts or threaded end of
straight or angle-Thimbleye bolts for straightaway head guys. Drop-forged galvanized
steel. Nuts are contoured to minimize bending
and kinking of guy strand.
Tapped For (in.)
5/8 Bolt
3/4 Bolt
twineye
Used for head or stub guying of two
strands, Twineye Nuts can be attached
to thru-bolts or threaded end of straight
or angle Thimbleye bolts. Grooves are
contoured to protect guy strands.
Hubbell Power Systems
6560
6561
6562
MacLean Power Systems
J6515
J6516
J16562
Tapped For (in.)
5/8 Bolt
3/4 Bolt
1 Bolt and PISA
www.stateelectric.com
17
eyes
angle thimbleye
Used for attaching to thru-bolt or
threaded end of straight or angle
Thimbleye bolt for down guying. Rounded
groove protects guy strand from sharp
bending and kinking.
Hubbell Power Systems
0100
0101
MacLean Power Systems
J6500
J6501
Bolt Diameter (in.)
5/8
3/4
thimbleye
Used on ordinary machine bolts for
straight-away guys. Rounded groove
protects guy strand from sharp kinks and
bends.
Hubbell Power Systems
6519
6520
MacLean Power Systems
J6550C
J6551
For Bolt Diameter (in.)
5/8
3/4
guards & straps
cable
UTILITY
Protect telephone and power lines
where circuits lead from underground to
overhead. Guards are 14-gauge hot dip
galvanized steel, formed into “U” shape.
Straps are made from hot dip galvanized
flat steel, shaped to fit the guards.
GUARDS
Hubbell Power Systems
C2030450
6531
653112
6532
6533
6534T
6535
C2030451
MacLean Power Systems
N/A
J985
J984
J6532
J987
N/A
J989
N/A
Length (ft.)
8
5
8
5
8
5
8
8
Inside Diameter (in.)
3/4
1 1/8
1 1/8
2 3/16
2 3/16
3 3/16
3 3/16
3 11/16
MOUNTING STRAPS
18
Hubbell Power Systems
MacLean Power Systems
6538
6539
6540
C2030455
C2030456
J955
J996
J997
N/A
N/A
Dimensions (in.)
Steel Size
Hole Diameter
1/8 x 3/4
1/8 x 3/4
3/16 x 1
3/32 x 3/4
3/16 x 1
9/32
9/32
11/32
9/32
11/32
www.stateelectric.com
guards
underground cable
Flanged one-piece unit is formed of 14
gauge steel. Hot dip galvanized. Extension
is flared at one end so that it can be
joined to the base section. A carriage bolt
fastens the two sections together and also
serves as a ground lead attachment point.
Mounting holes in 1” wide flanges are
located every 25”. No straps needed for
installation.
CABLE GUARDS
Hubbell Power Systems
C2030033
C2030034
C2030035
MacLean Power Systems
N/A
N/A
N/A
Overall Length (ft.)
9
9
9
Inside Diameter (in.)
2
3
3 1/2
CABLE GUARDS extensions
Hubbell Power Systems
MacLean Power Systems
C2030036
N/A
C2030037
N/A
Overall Length (ft.)
5
5
Inside Diameter (in.)
2
3
plastic molding
KOVER-GARD® molding protects surface
ground wires, lead wires and conductors.
Flame retardant and easy to install. Makes
wood or metal molding obsolete.
KOVER-GARD Molding
MacLean Power Systems
96KG12
96KG34
96KG1
96KG112
PM128
N/A
N/A
N/A
Height
Width
1/2
3/4
1
1 1/2
1/2
3/4
1
1 1/2
Dimensions (in.)
Thickness
1/16
1/16
5/64
5/64
Standard Length
Nominal
Size (in.)
96
96
96
96
1/2
3/4
1
1 1/2
UTILITY
Hubbell Power Systems
guy markers
HALF-ROUND MARKERS
Made from an MPO formulation, markers come
in yellow only. They resist whitening and have
high impact resistance. Markers don’t become
brittle when cold. They cover completely from
the ground up. Markers attach to any 3/16”
to 3/4” guy strands. Clamps are located at
top, middle and lower end of marker.
Each PBG is furnished with a one-bolt
hardware clamp at the lower end to fit all
types of guy attachments and two one-bolt
strand clamps at the middle that adapts to fitt
guy wires from 3/16” through 3/4”.
Hubbell Power Systems
MacLean Power Systems
84PBG2Y
96PBG2Y
N/A
N/A
www.stateelectric.com
Dimensions (in.)
Length
Width
84
96
2
2
19
guy markers
economy full-round
markers
Bright, high visibility markers neither bleach
out to white nor crack from cold temperatures.
Made of ultraviolet-stabilized high-density
polyethylene, overlapping tube-like design
offers full-length coverage.
Easy installation requires no tools. Replaceable
standard tie strap allows the markers to be
reused. Three holes permit the black selfHubbell Power
Systems
®
locking nylon strap (furnished) to secure the
96FRPE
lower end in a choice of two attachment
methods — either above or over the anchor
POWER SYSTEMS, INC.
rod, illustrated below. This fastening design
eliminates the cutaway section that would
weaken its resistance
breaking.
GUY toMARKERS,
FULL ROUND
MacLean Power Systems
®
N/A
5-29
bility
full-round markers
5" diameterIncreased
high visibility
yellow or orange provides
Visibility
ity to children
and
adults
A full 360° of 1.5” alike.
diameterAlso
high available
visibility in
more aesthetically inconspicuous applications. A 21/2"
yellow or orange provides increased visibility
r is also available.
to children and adults alike. Also available
in green or gray for more aesthetically
dal Resistance
inconspicuous
applications.
21/2”
diameter
trapping design
has been
added toAthe
security
of a
marker isnylon
also available.
and a self-locking
strap. The guy strand passes
ection only . . . into the marker.
Increased Vandal Resistance
allation Ease
A unique strand trapping design has been
ough to remove.
snap the
overpigtail
the guy
addedSimply
to the security
of marker
a concealed
ace with theand
self-locking
nylon
strap
a self-locking
nylon
strap.and
Thepigtail.
guy strand
passes easily in one direction only . . . into the
llation Range
marker.
iameters from 3/16" to 1/2".
UTILITY
Increased Installation
edness for Demanding Ser vice
EaseEasy
to install;polyethylene
tough to remove.
Simply
d, high impact,
high density
construction
snap
marker over
the guy and
and lock
it in
or retention,
coldtheweather
properties
no cutaway
place with the self-locking nylon strap and
en its strength.
pigtail.
ts
u save time Increase
but you’ll
also saveRange
money with these exInstallation
dable guy markers.
Fit guy strand diameters from 3/16” to
1/2”.Increased Ruggedness for Demanding
ServiceThe UV stabilized, high impact, high
density polyethylene construction has excellent
color retention, cold weather properties and*Cat.
no No. C0790263. Reflective 10" long bright
cutaway sections to weaken its strength.
orange strip 2' from top of yellow marker for
greater visibility. Ideal for heavy snow areas
and also for recreational ATV-use areas.
Decreased Costs
Not only will you save time but you’ll also save
money with these exceptionally affordable guy
markers.
ORDERING INFORMATION
Catalog
Number
flame
retardent
Dimensions
Std.
Wt. Per
Strand
100 Lbs.
RangeDimensionsPkg.
Dia.
Green
Orange
Yellow
Length
(in.)
3
1/2"
Power Systems84FRPMORG
MacLean Power84"
Systems 1.5"
20 Strand Size
105
84FRPMGRN
84FRPMYELHubbell
Length3/16" thru
Diameter
20
120
/16" thru 1/2"
1.5"
96FRPMGRN
96FRPMORG
96FRPMYEL (1)
96"
84FRPMRYEL
N/A 96"
1/2
20 3/16 thru
120
2"
1.5" 84 3/16" thru11/1/2
—
—
C0790263*
96FRPMRYEL
without pigtail, cat no.
T0790206
20
21/2" Diameter
Dimensions
J5718
96
1 1/2
www.stateelectric.com
Wt. Per
3/16 thru 1/2
Length (ft.)
8
Diameter (in.)
1 1/8
hangers
messenger
universal type
Used on corners and straight runs. Messenger
is securely clamped by two 1/2” carbon-steel
guy clamp bolts. Mounted with a 5/8” thrubolt and a 1/2” lag screw, neither of which
are included.
Hubbell Power Systems
MacLean Power Systems
7911
J1070
Steel Size
Dimensions (in.)
Extension from Pole
Strand Size
1/2 x 2
4 1/4
5/16 to 1/2
hooks
drive & screw
Hooks used to attach wedge type service
drops and deadend clamps to crossarms,
poles or buildings.
Hubbell Power Systems
MacLean Power Systems
C2050190
0317
J3316P
N/A
Dimensions (in.)
Thread Diameter
Length
Overall Length
7/16
3/8
2 1/2
2
4 3/4
4
guy
Hubbell Power Systems
5001
5004
6584
MacLean Power Systems
N/A
N/A
J1019
guy
ductile iron
Will accommodate a maximum guy strand
of 9/16” diameter at a 90° angle to
the pole. May be used for down guy
attachment with excellent load holding
capabilities. The guy strand loop may
be made up on the ground to simplify
installation.
Material Size (in.)
1/4 x 1 1/2 x 7
1/4 x 1 1/2 x 4 1/8
7/16 x 1 3/4 x 4
UTILITY
Keeps guy wire from creeping downward
when pole is guyed sharply. Hooks should
be used under bolt heads for maximum
shear strength.
Hole Diameter (in.)
9/16 x 13/16
11/16
11/16
Hubbell Power Systems
GH6
GH61LS
www.stateelectric.com
MacLean Power Systems
P133A
P134AXW
Type
2 Bolt
1 Bolt
21
irons
pulling in
Provides a strong and easy-to-get-at
attachment for the pulling-in blocks when
installing or removing cables. Pulling-in
irons are set into the brick or concrete
walls of street vaults opposite all duct
entrances.
Hubbell Power Systems
8119
8120
MacLean Power Systems
J8119
J8120
Steel Size (in.)
7/8 Rd.
7/8 Rd.
links
extension
The extension link is used to give
additional clearance on deadends and
corners. The end clevis has a slotted hole
for inserting the machine bolt without
having to remove the extension bar.
Hubbell Power Systems
C2070065
C2070112
T2070134
DC33B1
DC33B3
MacLean Power Systems
N/A
J6658
N/A
J6658
N/A
Hole to Hole Length (in.)
20”
14”
5.5”
14”
10”
UTILITY
nuts
M-F CURVED LOCK NUTS
Hubbell Power Systems
3510
3511
3512
3513
3514
22
Extension Bar Stock(in.)
5/16 x 1 1/2
1/4 x 2
1/4 x 2
3/16 x 1 1/4
3/16 x 1 1/4
MacLean Power Systems
J8581
J8582
J8583
J8584
J8584-1/2
Bolt Size (in.)
3/8
1/2
5/8
3/4
7/8
www.stateelectric.com
nuts
WASHER NUTS
Hubbell Power Systems
MacLean Power Systems
3194
J9802
Bolt Size
5/8
Dimensions (in.)
Washer Diameter
2 1/2
Square Size
15/16
FOR BOLTS REGULAR
SQUARE NUTS
Hubbell Power Systems
MacLean Power Systems
8600M
55083P
55084P
55085P
J8561
J8562
J8563
J8564
J8564-1/2
N/A
56538P
56073P
Dimensions (in.)
Bolt Size Threads Per Inch
3/8
1/2
5/8
3/4
7/8
1
16
13
11
10
9
8
FORGED STEEL
HIGH VOLTAGE FORGED
STEEL
Made with 1” lead thread for 1” pin-type
insulators. 1/2” and 5/8” diameter shank
pins are furnished with 2” x 2” x 1/8”
square washers, and the 3/4” pins with
21/4” x 3/16” square washers. These
pins come with square nut and curved
lock nut. Short shank pins come with spring
lock-washer and square nut only.
Use with pin-type insulators. Each pin is
forged from a single steel piece. Lead
threads are free of fins and mold-marks,
perfect insulator seating. Made for wood
crossarms, the long-shank type pins have
a 3” x 3” x 3/16” square washer, square
nut, curved locknut.
FOR WOOD CROSSARMS - FLAT-BASE LONG-SHANK TYPE
Hubbell Power Systems
MacLean Power Systems
881
J203
881A
J204
883
J207
884
J206
PS890
N/A
C2060266
N/A
C2060294
N/A
FOR STEEL CROSSARMS - FLAT-BASE SHORT-SHANK TYPE
Hubbell Power Systems
MacLean Power Systems
886
J221
PS887
J222
PS893
N/A
UTILITY
PINS
FOR WOOD CROSSARMS - 1” LEAD THREAD
Hubbell Power Systems
4705
4706
MacLean Power Systems
N/A
J606
FOR WOOD CROSSARMS - 1 3/8” LEAD THREAD
Hubbell Power Systems
4717
4326
4328
4332
www.stateelectric.com
MacLean Power Systems
J647
J607A
J608
J610
23
PINS
nylon thread crossarm
insulator
Nylon threads are an alternative to
lead threads on Chance steel insulator
pins. These forged steel pins are hot-dip
galvanized. Available on 5/8” diameter
shanks. Furnished with one each, 2” x 2”
x 1/8” square washer,square nut and
curved lock nut.
FOR WOOD CROSSARMS - FLAT-BASE LONG-SHANK TYPE
Hubbell Power Systems
881P
881AP
883P
884P
MacLean Power Systems
J203Z
J204Z
J207Z
J206Z
FOR STEEL CROSSARMS - FLAT-BASE SHORT-SHANK TYPE
Hubbell Power Systems
886P
887P
MacLean Power Systems
J221Z
J222Z
crossarm CORNER TIP
The crossarm corner pin is made of ductile
iron, hot-dip galvanized. It mounts standard
1” thread insulators at an angle 60° from
horizontal. Attached to the crossarm by means
of a square head bolt which is furnished as
part of the pin.
UTILITY
Hubbell Power Systems
MacLean Power Systems
PS8779
J215
Crossarm Size
Dimensions (in.)
Pin Height Above Crossarm
Bolt Size
Thread Size
4 x 5 Roofed
5
5/8 x 7
1
crossarm type
carriage bolt
Designed for straight-line, angle or corner
construction. Base rests evenly on arms to
prevent cutting into crossarm. Lugs prevent
twisting. Two 5/8” x 7” carriage bolts,
two square nuts, two curved lock nuts
and a 5/16” x 11/2” washer-plate are
included.
24
Hubbell Power Systems
MacLean Power Systems
14322
143221
J3322
J3324
Thread Size
Dimensions (in.)
Height Above Crossarm
Crossarm Size
1
1 3/8
5 3/4
6 3/4
3 3/4 x 4 3/4
3 3/4 x 4 3/4
www.stateelectric.com
pins
thimble adapter
Designed for insulator clearance when
used on bolt ends. Seat firmly against
the crossarm. Popular for rural line
construction. Made of 1” x 12-gauge
hot dip galvanized flat steel. A heavy
American standard 5/8” nut is crimped
to thimble bottom. Lead thread takes 1”
standard pin insulators.
Hubbell Power Systems
MacLean Power Systems
4258
J2840
Dimensions (in.)
Machine Bolt Diameter Max. Stud Length Overall Length
5/8
3
5 1/4
lag screw type
Pins have sharp gimlet-point threads
and are used primarily for pole and
transformer wiring. Forged steel, hot dip
galvanized with 1” cast lead thread.
Hubbell Power Systems
MacLean Power Systems
875
PS888
J025Z
N/A
pole top
Pins have sharp gimlet-point threads
and are used primarily for pole and
transformer wiring. Forged steel, hot dip
galvanized with 1” cast lead thread.
Shank Diameter
Dimensions (in.)
Base Diameter
Overall Length
1/2
5/8
1 3/4
2
9
8
nylon thread pole top
insulator
When no A dimension is given, the pin has
two mounting holes only.
Hubbell Power Systems
2162
2170
C2060106
C2060227
2199
2174
2171
21971
C2060140
MacLean Power Systems
D2162
J1368
N/A
N/A
J740
J1220Z
N/A
J744
J7442
Hubbell Power Systems
2162P
2170P
C2060106P
2199P
2174P
2171P
21971P
C2060140P
MacLean Power Systems
J715Z
J13682
N/A
J740Z
J1220Z
N/A
N/A
J7442
UTILITY
straight base pins - 1” threads
straight base pins - 1 3/8” threads
Hubbell Power Systems
2195
2196
MacLean Power Systems
J720
N/A
Offset base pins - 1 3/8” threads
Hubbell Power Systems
C2060271
MacLean Power Systems
J25179
www.stateelectric.com
25
plates
double arming
center-suspension type
Attached to the crossarm through the slots
provided. Suspension attachment is made
through center hole.
Hubbell Power Systems
MacLean Power Systems
5819
J1607
Dimensions (in.)
Steel Size
Overall Length
1/4 x 4
17
double arming
for clevis connections
Used with forged steel insulator pins or
suspension type insulators on wood or steel
crossarms. Used with clevises having 3/4”
or smaller bolts.
Hubbell Power Systems
MacLean Power Systems
5844
J1528
Dimensions (in.)
Steel Size
Overall Length
1/2 x 4
24
lift & load
Used to protect poles on heavy down
guying when Thimbleye, Angle- Thimbleye
or Oval-Eye bolts are used through the
pole.
UTILITY
Hubbell Power Systems
MacLean Power Systems
PS7887
7888
7897
7898
N/A
J7890
J7886
J7890
Hole Size (in.)
Top
Bottom
9/16
9/16
9/16
9/16
3/4 x 1
7/8 x 1
3/4 x 1
7/8 x 1
strain
Strain Plates are used to prevent pole from
being damaged by guy wire. Nail holes at
corners are 3/16” diameter.
Hubbell Power Systems
6575
26
MacLean Power Systems
J1034
Dimensions (in.)
4 x 8 x 14 Ga.
www.stateelectric.com
Plate Size (in.)
3/16 x 2 1/2 x 7
1/4 x 2 1/2 x 7
3/16 x 2 1/2 x 7
1/4 x 2 1/2 x 7
racks
secondary
medium & heavy types
These racks have fabricated steel points
that are permanently welded to the rack
bases. Insulators are not included.
medium type, extended back, 12 gauge
Hubbell Power Systems
MacLean Power Systems
No. of
Wires
C2070049
C2070047
C2070048
J767
J768
J769
2
3
4
Dimensions (in.)
End Mtg. Hole Spacing Overall Length, Back Width of Back
16
24
32
18
26
34
2 7/8
2 7/8
2 7/8
medium type, nonextended back, 9 gauge
Hubbell Power Systems
MacLean Power Systems
No. of
Wires
C2070050
C2070051
N/A
N/A
3
4
Dimensions (in.)
End Mtg. Hole Spacing Overall Length, Back Width of Back
16
24
21 3/4
29 3/4
3 1/4
3 1/4
medium type, nonextended back, 9 gauge
Hubbell Power Systems
MacLean Power Systems
No. of
Wires
C2070052
J768
3
Dimensions (in.)
End Mtg. Hole Spacing Overall Length, Back Width of Back
24
26
3 1/4
underground cable
heavy channel steel type
UTILITY
Made from 4” x 119/32” x 3/16”
channel steel. Hot dip galvanized. Either
expansion or anchor bolts can be used to
mount them to the vault wall. Pressed-steel
hooks have stops to keep insulators from
sliding off.
cable racks
Hubbell Power Systems
MacLean Power Systems
R1473
R1474
R1476
C2030047
N/A
N/A
N/A
N/A
No. of Slots
Dimensions (in.)
Hook Slot Spacing Overall Length
3
4
6
6
8
8
8
8
Mounting Hole Spacing
24
32
48
48
16
24
40
22 3/8 &40
cable racks hooks
Hubbell Power Systems
MacLean Power Systems
1292
1293
N/A
N/A
Dimensions (in.)
No. of Insulators
Accommodated Extension from Face of Rack Overall Length
2
3
10 1/4
16 5/8
12
18
Steel Size
12 Ga.
12 Ga.
cable rack insulator (white glaze)
Hubbell Power Systems
MacLean Power Systems
1115
N/A
Radius for Cable
2 5/8
Dimensions (in.)
Overall Length
4 1/2
www.stateelectric.com
Overall Width
2 5/8
27
racks
underground cable
Vertical pinning of successive racks is
permitted by an offset at each rack end.
Racks are made of 21/4” x 21/4” x 1/4”
steel T-section. Mounting holes and slot for
fastening to manhole walls are designed
to be used with or without insulators.
Hooks supplied with 3/8” x 11/2” cotter
bolt and key, also available with plastisol
coatings applied after galvanizing.
cable rack
supports
Supports extend cable rack away from
wall in order to avoid obstructions, escape
water seepage, or because of limited
space. Mounting holes take 1/2” bolts.
Two supports required to mount each rack.
Hubbell Power Systems
MacLean Power Systems
1101
1102
J5116
J5115
Dimensions (in.)
Mounting Hole Size
Steel Size
9/16
9/16
1/2 x 1
1/2 x 1 1/4
rods
ground
galvanized
UTILITY
Ground Rods are available with or without
copper wire. Made of high carbon,
open-hearth steel for maximum strength.
Does not bend when driven into hard
soils. The electro-brazed pigtail is No.
6 tinned copper on 5/8” and 3/4” rod.
Bolt-Type Drive Head Ground Rods have
surfaces of head and integral clamp
tinned. Non-ferrous bolt with lockwasher
accommodates No. 3 to No. 8 stranded
wire.
Hubbell Power Systems
8565
8566
8576
8578
8580
8618
8620
28
MacLean Power Systems
J5315
J5316
J5326
J5328
J5330
J5338
J5340
Diameter (in.)
1/2
1/2
5/8
5/8
5/8
3/4
3/4
Length (ft.)
5
6
6
8
10
8
10
www.stateelectric.com
screws
LAG
Lag Screws of 1/4”, 3/8” and 1/2”
diameter have upset shoulders.
gimlet point type
Hubbell Power Systems
MacLean Power Systems
872112GP
8722GP
872212GP
DF1L3
DF3L3
J8721-1/2
J8722
J8722-1/2
J8723
J8773
Dimensions (in.)
Diameter
Length
1/4
1/4
1/4
1/4
3/8
1 1/2
2
2 1/2
3
3
fetter drive pilot point
Hubbell Power Systems
MacLean Power Systems
508743
508744
508753
508754
508754 1/2
508755
J8743P
J8744
J8753P
J8754
J8754-1/2P
J8755P
Dimensions (in.)
Diameter
Length
3/8
3/8
1/2
1/2
1/2
1/2
3
4
3
4
4 1/2
5
TWIST-drive pilot point
MacLean Power Systems
508500
J8754TP
Dimensions (in.)
Diameter
Length
1/2
4
SHACKLES
ANCHOR
Hubbell Power Systems
5801
Used principally for attaching suspensioninsulator units to the pole. Drop forged.
RUS Load Rating: 20,000 lbs.
MacLean Power Systems
J2742
UTILITY
Hubbell Power Systems
SIDEWALK GUY FITTINGS
These fittings are used along sidewalks
or near buildings where space is not
available for standard guying.
Hubbell Power Systems
0501
0502
0512
MacLean Power Systems
SWGB2054
SWG205
J1502
Pipe Size (in.)
2
2
2
www.stateelectric.com
29
sleeves
serving
For holding down the loose end of guy
strand projecting beyond the guy clamp.
Chance Serving Sleeves, which have a
flared end to speed application, are
faster to apply than wire-wrap sleeves.
Hubbell Power Systems
6452
6453
6454
6455
6456
MacLean Power Systems
J5600
N/A
J5602
J5603
J5604
Strand Size (in.)
1/4
5/16
3/8
7/16
1/2
Overall Length (in.)
1 3/8
1 1/2
1 3/4
2
2 1/4
spacers
pipe
Hubbell Power Systems
2237
MacLean Power Systems
J2031
Length Size (in.)
1 1/2
Pipe Size (in.)
3/4 I.D.
steps
pole
UTILITY
Steps are made from hot-rolled openhearth steel. Standard Drive Hook type
has fetter drive thread and pilot point for
easy starting.
Hubbell Power Systems
506125
MacLean Power Systems
J1118
Size (in.)
5/8 x 10
pole
pole
detachable type
LADDER-RUNG TYPE, DETACHABLE
Steps make a neat appearance and deter
unauthorized pole climbing. Installed by
placing plate over lag until plate cuts into
pole. Nail driven into bottom hole gives
extra rigidity. Step fits on lag head. Order
lags and steps separately.
Detachable Rung used on metal poles.
Hubbell Power Systems
PS6235
PS6236
MacLean Power Systems
J6235
J6236
METAL pole
Hubbell Power Systems
T2050425
T2050426
Hubbell Power Systems
FT70025
MacLean Power Systems
N/A
pole
wood pole
30
Type Head
Hook
LADDER-RUNG TYPE, DETACHABLE
Detachable Rung used on metal poles.
Hubbell Power Systems
J600007
MacLean Power Systems
N/A
N/A
www.stateelectric.com
MacLean Power Systems
N/A
STRAPs
REINFORCING
Hubbell Power Systems
7905
Used as additional support in attaching
cable suspension clamps to pole for heavy
loads.
MacLean Power Systems
J7905
SUPPORTS
STATIC WIRE
Designed to carry static wires. Load plate
is welded to the rods, while the back plate
can be adjusted to fit the pole. Includes
1/2” link for wire-clamp attachment.
Hubbell Power Systems
MacLean Power Systems
5432
5433
5434
J6394
J6395
N/A
Dimensions (in.)
For Pole Diameter
Steel Size
8 to 10
10 to 12
12 to 14
5/8
5/8
5/8
thimbles
guy WIRE
Hubbell Power Systems
MacLean Power Systems
6593
6594
6595
J1057
J1058
J1059
UTILITY
Chance Guy-Wire Thimbles are primarily
used with Ovaleye anchor rods and bolts.
Grooved to fit various strand sizes, they
are made from crescent-shaped stock to
prevent abrupt, trand-weakening kinks.
Open end for slipping over rod or eye.
Dimensions (in.)
Strand Size
Guy Rod Clearance
3/8
1/2
5/8
1/2 and 5/8
5/8 and 3/4
1
tongues
deadend
This forged steel deadend tongue may
be used with virtually all strain insulator
clevises and clevis type suspension
insulators.
Hubbell Power Systems
MacLean Power Systems
C2030385
J515
Length
Dimensions (in.)
Hole Diameter
5
1x2
www.stateelectric.com
Steel Size
3/8
31
washers
galvanized
SQUARE CURVED WASHERS
Hubbell Power Systems
MacLean Power Systems
680912
681012
PS6822
682212
6823
682312
6825
DF4W15
J6829
J6821
J6822
J6823
J6823
J1132
J133
N/A
Washer Size
Dimensions (in.)
Hole Diameter
4 x 4 x 1/4
2 1/4 x 2 1/4 x 3/16
2 1/2 x 2 1/2 x 3/16
3 x 3 x 1/4
3 x 3 x 1/4
3 x 3 x 1/4
3 1/4 x 3 1/4 x 1/4
4 x 4 x 3/16
15/16
11/16
11/16
13/16
7/8
11/16
13/16
13/16
Bolt Diameter
7/8
5/8
5/8
3/4
3/4
5/8
3/4
3/4
SQUARE WASHERS
Hubbell Power Systems
MacLean Power Systems
6811
6812
6813
6814
6816
6817
6818
681812
6819
681912
6820
J1073
J1074
J1075
J1076
J1078
J1079
J1080
J1082
J1082
J1473
J1081
Washer Size
Dimensions (in.)
Hole Diameter
2 x 2 x 1/8
2 x 2 x 1/8
21/4 x 21/4 x 3/16
21/4 x 21/4 x 3/16
3 x 3 x 3/16
3 x 3 x 1/4
4 x 4 x 3/16
4 x 4 x 1/4
4 x 4 x 1/4
4 x 4 x 1/2
4 x 4 x 1/2
9/16
11/16
11/16
13/16
13/16
13/16
13/16
7/8
15/16
13/16
11/8
Bolt Diameter
1/2
5/8
5/8
3/4
3/4
3/4
3/4
3/4
7/8
3/4
1
round WASHERS
UTILITY
Hubbell Power Systems
MacLean Power Systems
PS6801
PS6802
PS6803
6805
N/A
N/A
N/A
J1088
J1089
6806
Washer Size
Dimensions (in.)
Hole Diameter
1 O.D. x 14 Ga.
11/4 O.D. x 14 Ga.
13/8 O.D. x 12 Ga.
13/4 O.D. x 10 Ga.
2 O.D. x 9 Ga.
7/16
9/16
9/16
11/16
13/16
Bolt Diameter
3/8
3/8
1/2
5/8
3/4
WIREHOLDERS
REINFORCED
Single-point wireholders are strong and
compact. Heavy cup-base and strap is a
single steel stamping, to which the screw is
rigidly assembled. Insulator and strap base
are assembled with solid-copper rivet.
Hubbell Power Systems
31144
31145
31146
32
MacLean Power Systems
J089Z
J0893Z
J0894Z
Screw or Bolt Size (in.)
No. 22 x 2 1/4 Galv. Wood Screw
No. 22 x 3 Galv. Wood Screw
No. 22 x 4 Galv. Wood Screw
www.stateelectric.com
WIREHOLDERS
UNIVERSAL SERVICE TYPE
These two pipe mounting wireholders will
together accommodate a range of pipe
sizes from 11/4” to 4”. Heavy cup-base
and strap is a single steel stamping, to
which clamp is rigidly assembled. Insulator
and strap-base are assembled with a
solid-copper rivet. Two carriage bolts are
wedged rigidly into the wireholder base
on both models.
Hubbell Power Systems
C2070075
C2070076
MacLean Power Systems
J0588Z
N/A
Pipe Size (in.)
1 1/4, 1 1/2, 2, 2 1/2
3, 3 1/2, 4
Hubbell Power Systems
0623
0607
0618
MacLean Power Systems
J089Z
J089Z
N/A
Screw or Bolt Size (in.)
No. 22 x 2 1/4 Galv. Wood Screw
No. 22 x 2 1/4 Galv. Wood Screw
No. 14 x 1 1/2 Cadmiumplated Wood Screw
Wire Hole (in.)
1 Diameter
1 Diameter
CLEVIS-TYPE
For use with triplex-type service cable, the
No. 0192/J075 Clevis takes one NEMA 53-2
spool insulator. Insulators must be ordered
separately.
Hubbell Power Systems
MacLean Power Systems
For Insulators
0192
J075
NEMA 53-2
Dimensions (in.)
Mounting Screw Size
Steel Size
No. 24 x 3 1/2
UTILITY
The Chance nylon alloy wireholder is offered
as a direct replacement for porcelain
wireholders. It has greatly increased
fracture resistance, comparable insulation
and increased ease of installation. The flat
top will let you start lag-screw wireholders
using a hammer. Universal installing tool is
available for powered installations.
3/16 x 1 1/2
For an introductory period, each box will
have two installation tools included with lagscrew wireholders. Installation tool is durable
for reusability.
screw-type
Hubbell Power Systems
C2070138
C2070139
C2070140
C2070143
MacLean Power Systems
J089Z
J0893Z
J0894Z
N/A
Screw Diameter (in.)
5/16 Lag
5/16 Lag
5/16 Lag
Tool
toggle-bolt
Hubbell Power Systems
C2070141
MacLean Power Systems
N/A
Screw Diameter (in.)
5/16 UNC-2A
clamp-type
Hubbell Power Systems
C2070144
C2070145
MacLean Power Systems
J0588Z
N/A
Pipe Size (in.)
1 1/4 - 2 1/2
3-4
www.stateelectric.com
33
2SBH36HH1
Nylon Thread
Crossarm Pin
High Voltage
Forged Steel
Pin
Machine Bolt
AR111FFB
Overhead Switch
GH6ILS
881P
Low Voltage
Insulator Pin
Guy Hook
Crossarm Brace
6575
Strain Plate
6461
TSC86
Guy Clamp
Trunnion
Suspension
Clamp
6482
GS570
Guy Wire Clip
80S015-0109
Polymer
Line Post
Insulator
Wildlife Protector
C2070047
Secondary Racks
4010150215
®
Lag Screw
Type Pin
Aluminum Distribution
Connector
GL4042A
Automatic Splice
4717
8706
7130
875
GM125A
Fiberglass Bi-Unit
881P
881
Lead Top Pin
With Steel Bolt
ADS48N
Polymer Deadend
Insulator
ISBM18CT
Deadend
Strain Clamp
Aluminum
Transformer
Bracket
Stirrup Clamp
BC2/0
2172597324
Support
Bracket
C15M36
AH4GP
Arrester
Hot Line Clamp
P8171176
8812 & 6813
PSC8620066
Single-Phase
Recloser
Motor
Operator
Machine Bolt & Square Washer
2172597324
Polymer Arrester
DM40B2
6984
Cutout & Arrester Bracket
Alley Arm Brace
74001PPT
Electronic Sectionalizer
C710112PB
469
Cutout
Dead End Clevis
8872
6510
0327
6510
UTILITY
Machine Bolt & Washer
Pole Eye Plate
6482
9000
Guy
Wire
Clip
Lashing
Clamps
GS16096CC2
7903
Suspension
Clamp
Fiberglass
Guy Strain
Insulator
96KG12
96FRPE
Guy Marker
C6CS024
PS6236
215ELA15
Polymer
Elbow
Arrester
Polymer Riser
Pole Arrester
Polymer Cutout
GEP5A
8812 & 6813
Suspension
Clamp
2216097224
C710112PB
Thimble Eye Nut
Thimble Eye Bolt
7903
By-Pass
Switch
Pole Step
Double Arming Bolt
Insulated Clevis
BPRD061
506125
Conduit
Standoff
Bracket
TM
Detachable
Pole Step
PS6235
Lag & Plate for
Detachable Pole Step
G5061
GDE5100
Bonding
Clamp
C2030344
Ground Rod
Clamp
U Cable
Guard
Automatic
Guy
Deadend
KS12
Cable Guard
Strap
C1020024
Thimble Eye
9U01AAD643
Loadbreak
Elbow
C215J4B
215J4U
Multi-Tap
9U07BAF100
C615880
Motor
Operator
Grounded Bushing
34
Ground Rod
Padmounted
Switch
PC1730BA12
Polymer
Concrete
or Fiberglass
Box Pad
www.stateelectric.com
Junction
E1020044
Anchors
PG1730CAL050
Polymer
Concrete
or Fiberglass
Enclosure
625TBT
Deadbreak
Elbow
©Copyright 2011
alley-arm-a side arm brace used when cross-arm is not
balanced on both sides of pole but extending out on one
side only.
alligator-a tie stick.
A.R.-abbreviation for automatic recloser.
baker board-platform board.
baloney-cable.
baloney bender-a wireman who works with heavy cable.
banjo-a shovel, straight blade and long handle.
bear grease-Z.L.N. electric contact aid.
becky-a cable sling.
bell-suspension or deadend insulators.
bell wrench-wrench for tightening various square head
bolts.
bender-hammer.
bible-the electrician’s code book.
bicycle-a chain drill for boring holes.
boatswain’s chair-a small wooden seat supported by four
ropes secured to a ring or tied at a common point above
the workman’s head.
booger wire - a neutral wire.
bookie tool-a staple puller.
bookie wheel-a measuring device.
boomer-1) a lineman who leaves one job to get to the next
job. 2) a lineman who always worked on the installation of
new transmission lines.
booties-meter clip insulators.
bottles-glass insulators.
box-1) porcelain enclosedtype cutout.
box-2) padmounted transformer or switchgear.
broomsticks - phase spacers, used to keep phases from
coming into contact with each other at midspan.
buck-to lower or attempt to lower the voltage.
buck arm-two sets of crossarms at 90 degree angles to
each other.
bucket truck-an aerial lift truck for raising men high enough
to work on lines from the insulated bucket of the truck.
bug-transformer (Northwest U.S. term)
bugs-solderless, usually bolted, connectors.
bug wrench-speed wrench (Fargo box ratchet type) to
install bolted connectors (‘bugs’).
bulldog-a “come-a-long” wire grip for holding conductor or
strand under tension.
bulldog wrench-an alligator wrench.
bullhorn-Epoxirod bi-unit.
bull line-heavy line for pulling in wires.
bull pen-where the construction crew gathers before and
after work.
bull wheel-a reel device used to hold tension on a
transmission conductor during stringing operations.
bundle-multiple strings of conductor.
bust anchor-expanding anchor.
buster-expanding and tamping bar used on expanding
anchors.
butterfly-conductor take-up reel.
can-an overhead transformer.
candlestick-fiberglass downlead bracket.
candy grabbers-channel lock pliers
cat head-capstan hoist.
cattle guard-a plastic or metal guy guard.
cheaters-channel lock pliers.
cherry picker-bucket truck.
chicken catcher-armsling
chicken tracks-Epoxirod tri-unit
chicken wing-steel post insulator standoff for distribution
construction.
chili bowl-an oversized pin-type insulator.
choker-a nylon sling.
christmas tree-pole mounted auxiliary arm used for lifting
conductors.
CLF-abbreviation for current limiting fuse.
climbers-hooks for climbing poles.
clum some-a greenhorn lineman, apprentice, helper.
coffin hoist-a chain hoist of any type.
cold-a de-energized line
come-a-long-wire grip for holding conductor or strand
under tension. Also spelled cuma-long.
corn cob-thimble adapter pin.
coming up easy-pick up load or increase tension.
crosby clip-wire rope guy wire clip.
crow’s foot-Epoxirod tri-unit.
C.S.P.-completely self-protected transformer.
C.S.T.-customer subsurface transformer.
C.T.-current transformer, a device used to transfer current
from one value to another.
cum-a-long-a wire grip for holding conductor or strand
under tension. Also spelled comea-long.
d.a. bolt-double arming bolt.
dead man-1) wood pole, with U-bracket fitting for setting
poles by hand without a truck. 2) short wood pole section,
buried as an anchor. 3) any kind of earth anchor.
diaper-1) rubber blanket pinned on overhead construction;
2) Seal-A-Conn covering connector.
digging bar-long, round steel bar with 2-in. chisel on one
end; (“idiot stick”).
dig pole-a transition pole for going from over head to
underground distribution.
disc-suspension or deadend insulator.
diving board-a platform board.
DOCO-drop-out cutout; open type cutout.
dog bone-1) special EHV yoke plates, socalled due to their
shape; 2) vibration damper.
door-1) the fuse tube on open type cutouts. 2) actual door
on enclosed type cutouts.
drifter-a lineman who wants to see the world.
eagle-eye-leveling crossarms by sight with no measuring
instruments.
eels-line hose, temporary cover-up.
egg breaker-a guy strain insulator.
egg sucker-Grip-All stick, hot line tool.
E.H.V.-extra high voltage.
elephant ear-a high strength strain insulator.
elephant ears-1) the arc chute on certain types of cutouts for
extinguishing the arc while breaking load; 2) a triangular
bracket.
EPDM-rubber material used in underground elbow and other
connectors (ethylene propylene diene modified).
equalizers-a pair of connectors or club when used in a fight.
eyeball-visual determination without the use of instruments.
fish-a glass strain insulator.
flip-cutout-an open link cutout.
floater-1) a lineman who would quit in the middle of a job;
2) a conductor that has become untied from an insulator; 3)
a conductor, insulator and pin that has separated from the
crossarm and is “floating” rather than tied down.
flower pot-universal bushing well, padmount transformer.
finger-line-1/4” line.
four and a quarter-porcelain dead end insulator.
fuzz box-noisy tester.
gate-an open type cutout’s fusetube.
gin-temporary lifting device; see pole buddy.
goathead-an angle-iron punch.
goathorns-guy hooks, iron.
goat-skin-tarp for covering unfinished work for the night.
gopher-a “go for this, go for that” helper.
goulash-insulating compound.
grasshopper-see flip-cutout.
ground hog-a lineman’s helper.
grunt-a lineman’s helper.
gut-5 kV rubber line hose.
gut wrench-cant hook.
guy jack-a chain hoist.
half-power-a lineman working off a jag.
hand-a tie stick.
hard head-a lag screw.
hard line-steel bull line for pulling in wires
headache-1) vocal warning of danger. 2) anything falling
from above on pole.
high pot-to apply high potential to electrical machine or
equipment, normally done during insulation testing.
hog liver-flat porcelain guy strain insulator.
hood-insulator cover.
hooks-climbers, used for climbing poles.
hookstick-insulated disconnect stick.
hose-rubber or plastic cover up equipment
hot-a live or energized line.
hot arm-extension arm.
hot link-ball and socket link or other types of extension links.
house bracket-a secondary rack.
house knob-a wire holder.
idiot stick-see digging bar.
instant foundation-streetlight foundation.
J hook-drive and screw hook.
jack-a cutout.
jack straps - small (2-in.) blocks for pulling up small wire
secondary.
jacobs ladder-a portable rope ladder.
jiffy deadend-non-compression deadend for copper.
jiggler-a glow light, secondary voltage tester.
johnny-ball-guy strain insulator.
joy jelly-silicone compound for elbow terminators.
jugs-horizontal post insulators.
jumper-a slack electrical connection between two points.
jumper holding stick-wire holding stick.
kettle-an overhead transformer.
knife switch-hook stick disconnect.
knuckle buster-an adjustable wrench.
lady slippers-name applied to present day climbers by oldtimers.
leg irons-climbers, hooks.
lead head-1) nail; 2) pin with threaded lead top for porcelain
insulators.
leroy-generator
lid-hard hat.
limberneck-a groundman.
line gut-conductor cover.
line profile-scaled side view drawing of actual line for
engineer’s review.
liners-cloth glove liners or for hard hats in the winter.
lobster claw-an adjustable insulator fork.
luff blocks-small set of rope blocks.
mac-mechanical load pick up jumper.
mack clamps-insulated jumper clamps.
meat hook-hand line hook.
mickey mouse key puller-cotter key puller.
milking stool-a yoke used on the end of a structure for
supporting hot line tension tools.
moles-underground line crew.
music stand-a hot line tool rack.
narrow back-an inside electrician.
nitros-street light bulbs.
nose bag-canvas tool pouch.
nutty putty-Seal-A-Conn for covering connectors.
O.C.B.-oil circuit breaker.
old man-an “A” frame transformer gin.
pad-a pad mounted transformer.
P.C.B.-1) power circuit breaker; opens the current under fault
or overload condition. 2) polychlorinated biphenyl chemical.
pen and pencil set-digging bar and spoon.
persuader-a hammer.
phase-one (single) conductor.
pickle-fork-two or three prong tie stick.
pickles-wire connectors.
pig-cover ups.
pig livers-special yokes used on EHV lines or dead ends.
pig-tail-spiral disconnect or spiral link stick.
pigtail-the leader or cable on fuselinks.
pineapple-a spool insulator.
pistol-elbow terminator.
pistol grip-elbow terminator.
pizza plate-a fork suspension attachment.
pogo stick-telescoping tools.
pole buddy-a transformer gin.
pole crab-wire tong saddle.
pork chop-a “come-a-long”;wire grip for holding conductor or
strand under tension.
pot-1) potential transformer; 2) pole-top transformer.
pole stub-pole reinforcer.
potato hook-fixed prong tie stick.
pothead-1) a point where separate or overhead electrical
conductors come together and continue as cable. 2) the
termination device used on end of an underground cable.
pouch-a tool bag.
P.T.O.-power take off.
rake-tie stick.
red head jumper-insulated jumper clamp.
red one-an extremely short distance.
reptile-insulating line hose.
ridge pin-pole top pin.
riser pole-a transition pole going from overhead to underground
distribution.
rough neck-a trouble chaser.
saddle pin-a crossarm type pin, fits like a saddle.
sav-a-climb-universal fitting for laying lines over crossarms and
through trees with a stick.
saw dust machine-a brace and bit or drill.
saw dust pump-a brace and bit, hand drill.
service drop-the conductor between pole and terminal on a
building.
sharp shooter-a shovel with long narrow blade for digging
holes in ground like clay.
sheaves-any type of rope block.
shoe-fly-a temporary line built to bypass a construction area.
short hook-up-cord and clips for electric drill.
shot gun stick-a Grip-All stick.
single jack-a heavy hammer.
sinker-pin pushed down through crossarm and insulator rests on
crossarm.
sister eye-eyebolt or anchor rod eye for guy strand or insulator.
skywire-a ground wire on top of poles and towers to protect
the lines from lightning.
slave market-an employment agency’s office.
sleeve-a splice.
slip stick-a Grip-All stick.
slug-a solid blade on open type cutouts.
snake-an insulating line hose.
spool bolt-an upset bolt used to support spool insulators.
spoon-a shovel; cup-shaped with long handle.
squeeze on-a compression fitting (connectors).
squeeze wrench-hand compression or cutting wrenches.
squirrel cage-a steel bracket mounted on a pole to support line
conductors.
staking-to survey and mark location for each new line pole.
stinger-1) wire from cutout to transformer. 2) a boom extension.
strong arm-a chain or strap hoist for pulling wire.
switch stick-a disconnect stick.
tag line-rope used to tie off line or to control load being lifted.
tag-out-link stick.
tap clamp-a hot line clamp.
three-phase set-three shovels; a spoon, a spade, and a shovel;
all three are of different design for different uses.
thumper-underground fault locator.
thru-bolt-a machine bolt.
toilet seat-1) insulator retainer for trolley pole. A fork suspension
tool attachment.
tongs-1) usually refer to pole tongs, used for controlling pole
when setting 2) insulated wire tongs used for supporting or
moving energized conductor. transformer ‘bank’ - two or three
transformers at same location connected to the same circuit.
traveling chain-a movable grounding device.
traveling chair-a fabricated aluminum two-wheel trolley with an
attached chain.
traveling ladder-wooden ladder with fiber rollers generally
used when work or inspection has to be done on transmission
hardware or conductor.
tub-pole type transformer.
tube-cable in conduit.
tupperware-plastic protective cover.
turkey wing-steel post insulator standoff for distribution
construction.
two pound-a lineman’s hammer.
u-bangi-15 kV rubber line hose.
upset bolt-see spool bolt.
URD-underground residential distribution.
walking crab-a lever lift.
waterfall-a triple drum puller.
weatherhead-the top of the conduit that contains the customer
service conductors, constructed so it will resist the action of rain,
sun, etc.
westerns-also hooks, standard climbers for old-type Western
Union.
wire twister-an inside electrician.
widow-a cable grip.
wiggle-a glow light, secondary voltage tester.
wiggle wire-any kind of formed wire used for securing
conductors to insulators.
wildcat connection-three-phase four wire delta
wildcat leg-center tap connection on threephase four wire delta
wire bender cutout-an open link cutout.
window pole-a disconnect stick.
UTILITY
definitions
35
INDEX
UTILITY
36
Hubbell
0100
0101
0317
0322
0327
0337
0340
0341
0344
0352
0501
0502
0512
0607
0618
0623
1101
1102
1115
1292
1293
14322
143221
15808
15810
15812
15814
15828
15830
15832
15834
1948C
1948M
19784
19786
19788
19790
19792
2157
2162
2162P
2170
2170P
2171P
2174
2174P
2195
2196
21971
21971P
2199
2199P
2237
2357
29930
29939
29943
29956
29958
29959
29960
29962
29964
29966
29968
29970
29978
page
18
18
21
16
16
16
16
16
16
16
29
29
29
33
33
33
28
28
27
27
27
24
24
6
6
6
6
6
6
6
6
16
16
6
6
6
6
6
11
25
25
25
25
25
25
25
25
25
25
25
25
25
30
10
6
7
7
7
7
7
7
7
7
7
7
7
7
Hubbell
29980
29982
29984
29986
29988
31144
31145
31146
3194
3470
3510
3511
3512
3513
3514
4257
4258
4326
4328
4332
455
468
469
4705
4706
4717
5001
5004
5010
5012
5014
5016
506125
508500
508500
508743
508744
508753
508754
508754 1/2
508755
5110T
5112T
5114T
5432
5433
5434
5436
5450
5466
55083P
55084P
55085P
5510
5512
5514
5516
56073P
5612
5614
56538P
5728
573
5801
5819
5844
6276
page
7
7
7
7
7
32
32
32
23
11
22
22
22
22
22
4
25
23
23
23
15
16
16
23
23
23
21
21
8
8
8
8
30
29
29
29
29
29
29
29
29
8
8
8
31
31
31
5
14
5
23
23
23
8
8
8
8
23
8
8
23
9
16
29
26
26
5
Hubbell
6277
6278
636412
637412
6409
6410
6448
6449
6450
6452
6453
6454
6455
6456
6460
6461
6462
6480
6481
6482
6500
6501
6502
6503
6510
6511
6519
6520
6531
653112
6532
6533
6534T
6535
6538
6539
6540
6560
6561
6562
6575
6584
6593
6594
6595
6805
6806
680912
681012
6811
6812
6813
6814
6816
6817
6818
681812
6819
681912
6820
682212
6823
682312
6825
6940
69401
6941
www.stateelectric.com
page
5
4
5
5
14
14
14
14
14
30
30
30
30
30
14
14
14
17
17
17
17
17
17
17
17
17
18
18
18
18
18
18
18
18
18
18
18
17
17
17
26
21
31
31
31
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
9
9
9
Hubbell
page
6942
9
69421
9
6948
9
6953
9
6955
9
6979
8
6984
8
6999
8
7020
9
7026
9
7028
9
7030
9
7032
9
7126
9
7128
9
7130
9
7132
9
7741
8
774112
8
7742
8
7743
8
7744
8
7826
8
7828
8
7830
8
7832
8
7834
8
7888
26
7897
26
7898
26
7901
15
7902L
15
7902R
15
7903
15
7903L
15
7904
15
7905
31
7911
21
7920
4
7921
4
7956
14
8119
22
8120
22
8205
12
84FRPMRYEL 20
84PBG2Y
19
8565
28
8566
28
8576
28
8578
28
8580
28
8600M
23
8604
7
860412
7
8605
7
860512
7
8618
28
8620
28
8634
6
8634
6
863412
6
863412
6
8635
6
8635
6
8636
6
8636
6
8637
6
Hubbell
page
8637
6
8645
6
8645
6
864512
6
864512
6
8646
6
8646
6
8647
6
8647
6
870112
7
870412
7
8705
7
8706
7
8707
7
8708
7
8709
7
8710
7
8712
7
8714
7
872112GP 29
872212GP 29
8722GP
29
875
25
8777
6
8795
16
8805
7
8806
7
8807
7
8808
7
8809
7
881
23
8810
7
8812
7
8814
7
8816
7
8818
7
881A
23
881AP
24
881P
24
8820
7
8822
7
8824
7
883
23
883P
24
884
23
8846
6
8848
6
884P
24
886
23
886P
24
887P
24
8908
7
8910
7
8912
7
8914
7
8916
7
8918
7
8920
7
8922
7
8924
7
8926
7
9000
15
9113S
13
9114S
13
9183
12
96FRPE
20
96FRPMRYEL 20
Hubbell
page
96KG1
19
96KG112
19
96KG12
19
96KG34
19
96PBG2Y
19
C2030033
19
C2030034
19
C2030035
19
C2030036
19
C2030037
19
C2030047
27
C2030148
13
C2030183
5
C2030194
5
C2030197
5
C2030200
5
C2030233
9
C2030385
31
C2030450
18
C2030451
18
C2030455
18
C2030456
18
C2050094
6
C2050190
21
C2050254
7
C2050255
7
C2050256
7
C2050257
7
C2050258
7
C2060004
11
C2060009
11
C2060010
11
C2060011
11
C2060106
25
C2060106P 25
C2060127
10
C2060140
25
C2060140P 25
C2060162
12
C2060169
12
C2060189
10
C2060190
10
C2060192
10
C2060193
10
C2060209
12
C2060227
25
C2060236
10
C2060266
23
C2060271
25
C2060280
10
C2060283
10
C2060294
23
C2060299
10
C2060480
9
C2060547
10
C2070024
16
C2070047
27
C2070048
27
C2070049
27
C2070050
27
C2070051
27
C2070052
27
C2070065
22
C2070075
33
C2070076
33
C2070112
22
C2070138
33
Hubbell
C2070139
C2070140
C2070141
C2070143
C2070144
C2070145
DC33B1
DC33B3
DF1L3
DF3L3
DF4W15
DG1F18
DG1F8
DG4F8
FT70025
G5060
G5061
G5063
G5063
G5065
G5067
G5068
G5069
GH6
GH6ILS
J600007
P451016
PS2355
PS5484
PS6235
PS6236
PS6280
PS6366
PS6367
PS6368
PS6376
PS6377
PS6378
PS6801
PS6802
PS6803
PS6822
PS7887
PS8779
PS887
PS888
PS890
PS893
R1473
R1474
R1476
T2030367
T2030459
T2050425
T2050426
T2060398
T2070134
www.stateelectric.com
page
33
33
33
33
33
33
22
22
29
29
32
8
8
8
30
13
13
13
13
13
13
13
13
21
21
30
4
10
5
30
30
4
5
5
5
5
5
5
32
32
32
32
26
24
23
25
23
23
27
27
27
8
9
30
30
9
22
MacLean
D2162
J025Z
J0313
J0322
J0342
J0344
J0588Z
J0588Z
J0590
J075
J0893Z
J0893Z
J0894Z
J0894Z
J089Z
J089Z
J089Z
J089Z
J093
J1019
J1030
J1034
J1048
J1049
J1050
J1057
J1058
J1059
J1070
J1073
J1074
J1075
J1076
J1078
J1079
J1080
J1081
J1082
J1088
J1089
J1091
J1092
J1093
J1095
J1096
J1118
J1130
J1132
J1132
J1220Z
J1220Z
J1300
J133
J1368
J13682
J1395
J1399
J1442
J1473
J1502
J1506
J1506
J1507
J1508
J1508
J1510
J1512
page
25
25
16
16
16
16
33
33
12
33
32
33
32
33
32
33
33
33
16
21
14
26
17
17
17
31
31
31
21
32
32
32
32
32
32
32
32
32
32
32
17
17
17
15
15
30
5
5
32
25
25
16
32
25
25
16
16
8
32
29
9
9
9
9
9
9
9
UTILITY
INDEX
37
INDEX
UTILITY
38
MacLean
page
J1514
9
J1522
8
J1525
8
J1528
26
J1607
26
J1614
16
J1626
16
J16562
17
J203
23
J2031
30
J203Z
24
J204
23
J204Z
24
J206
23
J206Z
24
J207
23
J207Z
24
J215
24
J221
23
J221Z
24
J222
23
J2342-1/2 8
J2343-1/2 8
J2344-1/2 8
J2346-1/2 8
J2348-1/2 8
J2352
11
J2357
10
J2394
8
J2396
8
J2398
8
J24515
10
J24665
10
J24711
10
J24712
10
J25088.1
15
J251
16
J25179
25
J25256-2
11
J2584
12
J26190
10
J26714
13
J26715
13
J26716
13
J2742
29
J2840
25
J3230
13
J3231
13
J3233
13
J3316P
21
J3322
24
J3324
24
J4023
4
J455
15
J5115
28
J5116
28
J515
31
J5315
28
J5316
28
J5326
28
J5328
28
J5330
28
J5338
28
J5340
28
J5600
30
J5602
30
J5603
30
MacLean
J5604
J5718
J575
J606
J607A
J608
J610
J6235
J6236
J6270
J6280
J6394
J6395
J647
J6500
J6501
J6510
J6511
J6515
J6516
J6532
J6550C
J6551
J6641
J6644
J6658
J6684
J6765
J6765A
J6821
J6822
J6823
J6829
J7126
J7126
J7128
J7128
J7130
J7130
J7132
J7132
J715Z
J720
J740
J740Z
J744
J7442
J744Z
J767
J768
J769
J7808
J7810
J7812
J7814
J7886
J7890
J7890
J7901
J7905
J7910A
J7920
J7921
J7935
J7936
J8051
J8052
page
30
20
16
23
23
23
23
30
30
5
5
31
31
23
18
18
17
17
17
17
18
18
18
5
5
22
5
13
13
32
32
32
32
9
9
9
9
9
9
9
9
25
25
25
25
25
25
25
27
27
27
6
6
6
6
26
26
26
15
31
15
4
4
9
9
8
8
MacLean
page
J8053
8
J8054
8
J8055
8
J8062
8
J8063
8
J8119
22
J8120
22
J8151
8
J8152
8
J8153
8
J8154
8
J8161
8
J8162
8
J8163
8
J8561
23
J8562
23
J8563
23
J8564
23
J8564-1/2 23
J8581
22
J8582
22
J8583
22
J8584
22
J8584-1/2 22
J8604
7
J8604-1/2 7
J8605
7
J8634
6
J8634
6
J8634-1/2 6
J8634-1/2 6
J8635
6
J8635
6
J8636
6
J8636
6
J8637
6
J8637
6
J8645
6
J8645-1/2 6
J8646
6
J8647
6
J8701-1/2 7
J8705
7
J8706
7
J8707
7
J8708
7
J8709
7
J8710
7
J8712
7
J8714
7
J8721-1/2 29
J8722
29
J8722-1/2 29
J8723
29
J8743P
29
J8743P
29
J8744
29
J8753P
29
J8754
29
J8754
29
J8754-1/2P 29
J8754TP
29
J8755P
29
J8773
29
J8805
7
J8806
7
J8807
7
www.stateelectric.com
MacLean
page
J8808
7
J8809
7
J8810
7
J8812
7
J8814
7
J8816
7
J8818
7
J8820
7
J8822
7
J8824
7
J8908
7
J8910
7
J8912
7
J8914
7
J8916
7
J8930
6
J9064
7
J9066
7
J9068
7
J9070
7
J9072
7
J9120
8
J9134
8
J926
14
J927
14
J929
14
J93 16
J930
14
J931
14
J9406
7
J9408
7
J9409
7
J9410
7
J9412
7
J9414
7
J9416
7
J9418
7
J9420
7
J9508
7
J9510
7
J9512
7
J9514
7
J9516
7
J9518
7
J9802
23
J984
18
J985
18
J987
18
J989
18
J995
18
J996
18
J997
18
NWB5
11
P133A
21
P134AXW
21
PM128
19
RCEL-68-1125 15
SPHJB-85-5-30 12
SWG205
29
SWGB2054 29
locations
Illinois
State Electric Supply Company
1911 W. Rendleman Street
Marion, Illinois 62959
Phone 618.993.5197
Fax 618.993.5629
Toll Free: 1.877.501.0767
Kentucky
State Electric Supply Company
2528 Greenup Avenue
Ashland, KY 41101
Phone: 606.324.8011
Fax: 606.324.5869
Toll Free: 1.800.258.7415
State Electric Supply Company
1518 Industrial Park Drive
Maysville, KY 41056
Phone: 606.759.9207
Fax: 606.759.4822
Toll Free: 1.800.394.1760
State Electric Supply Company
1420 East Cumberland Avenue
Middlesboro, KY 40965
Phone: 606.248.1730
Fax: 606.248.7347
Toll Free: 1.800.625.5505
State Electric Supply Company
122 Johnson Street
Pikeville, KY 41501
Phone: 606.432.3163
Fax: 606.432.4323
Toll Free: 1.800.443.9044
State Electric Supply Company
1121 Central Avenue
South Williamson, KY 41503
Phone: 606.237.7150
Fax: 606.237.7153
Toll Free: 1.888.211.7823
North Carolina
State Electric Supply Company
485 Watson Road
Arden, NC 28704
Phone: 828.681.9813
Fax: 828.684.8034
Toll Free: 1.855.231.3283
State Electric Supply Company
8065 Chapel Hill Road
Cary, NC 27513
Phone: 919.467.4802
Fax: 919.467.5428
Toll Free: 1.800.280.3467
State Electric Supply Company
1100 Concord Parkway North
Concord, NC 28027
Phone: 704.788.3300
Fax: 704.788.2966
Toll Free: 1.800.397.0663
State Electric Supply Company
1111 Person St
Durham, NC 27703
Phone: 919.596.1396
Fax: 919.596.5520
Toll Free: 1.800.280.0253
State Electric Supply Company
801 South George Street
Goldsboro, NC 27530
Phone: 919.735.1701
Fax: 919.734.2461
Toll Free: 1.800.661.3210
State Electric Supply Company
2709 Patterson Street
Greensboro, NC 27407
Phone: 336.855.8200
Fax: 336.855.6681
Toll Free: 1.800.852.6681
State Electric Supply Company
1953 Martin Luther King Jr. Blvd.
Kinston, NC 28501
Phone: 252.523.7685
Fax: 252.523.7986
Toll Free: 1.800.280.6260
State Electric Supply Company
989 West Pine Street (Hwy. 89)
Mt. Airy, NC 27030
Phone: 336.786.9816
Fax: 336.786.2228
Toll Free: 1.800.522.9816
State Electric Supply Company
1991 Statesville Road
North Wilkesboro, NC 28659
Phone: 336.667.7420
Fax: 336.667.7324
State Electric Supply Company
3925 Tarheel Drive
Raleigh, NC 27609
Phone: 919.821.5320
Fax: 919.833.5776
Toll Free: 1.866.743.7473
State Electric Supply Company
815 Julian R. Alsbrook Hwy
Roanoke Rapids, NC 27870
Phone: 252.535.3171
Fax: 252.535.3141
Toll Free: 1.800.280.3999
State Electric Supply Company
1415 South Main Street
Salisbury, NC 28144
Phone: 704.633.9131
Fax: 704.633.9158
Toll Free: 1.800.397.0848
State Electric Supply Company
130 Houston Road
Troutman, NC 28166
Phone: 704.528.8081
Fax: 704.528.8370
Toll Free: 1.800.799.4252
State Electric Supply Company
1221 National Drive
P.O. Box 5098
Winston-Salem, NC 27103
Phone: 336.723.9656
Fax: 336.777.0588
Toll Free: 1.800.223.9656
Ohio
State Electric Supply Company
9 Herrold Avenue
Athens, OH 45701
Phone: 740.594.1177
Fax: 740.594.1166
Toll Free: 1.877.801.0559
State Electric Supply Company
1262 Industrial Drive
Chillicothe, OH 45601
Phone: 740.774.1107
Fax: 740.773.5121
Toll Free: 1.800.443.8084
State Electric Supply Company
319 Forest Rose Avenue
P.O. Box 576
Lancaster, OH 43130
Phone: 740.654.0830
Fax: 740.654.4309
Toll Free: 1.800.645.0830
State Electric Supply Company
2045 8th Street
Portsmouth, OH 45662
Phone: 740.354.3141
Fax: 740.354.3143
Toll Free: 1.800.282.4593
Virginia
State Electric Supply Company
390 Arbor Drive
Christiansburg, VA 24073
Phone: 540.382.6415
Fax: 540.381.1520
Toll Free: 1.800.874.7856
State Electric Supply Company
348 North Monroe Avenue
Covington, VA 24426
Phone: 540.965.5200
Fax: 540.962.8852
State Electric Supply Company
1011 Commerce Road
Richmond, VA 23224
Phone: 804.232.8911
Fax: 804.232.0794
Toll Free: 1.800.922.4296
State Electric Supply Company
3105 Shenandoah Avenue, NW
Roanoke, VA 24017
Phone: 540.343.3800
Fax: 540.981.2899
Toll Free: 1.877.595.8386
State Electric Supply Company
225 North 11th Street
Wytheville, VA 24382
Phone: 276.228.3191
Fax: 276.228.7467
West Virginia
State Electric Supply Company
530 Ragland Road
Beckley, WV 25801
Phone: 304.256.2200
Fax: 304.256.2229
Toll Free: 1.800.642.2762
www.stateelectric.com
State Electric Supply Company
820 Bluefield Avenue
Bluefield, WV 24701
Phone: 304.327.3464
Fax: 304.325.6610
Toll Free: 1.800.544.6755
State Electric Supply Company
Route 50 East
P.O. Box 986
Clarksburg, WV 26301
Phone: 304.624.7467
Fax: 304.624.7464
Toll Free: 1.800.642.7467
State Electric Supply Company
1223 Charles Avenue
Dunbar, WV 25064
Phone: 304.766.0500
Fax: 304.766.0518
Toll Free: 1.800.642.8642
SESCO DataComm
405 12th Street
Dunbar, WV 25064
Phone: 304.768.3600
Fax: 304.768.3698
Toll Free: 1.800.344.5202
State Electric Supply Company
2010 2nd Avenue
P.O. Box 5397
Huntington, WV 25703
Phone: 304.523.7491
Fax: 304.522.9624
Toll Free: 1.800.624.3417
State Electric Supply Company
181 Oak Carriage Lane
Lewisburg, WV 24901
Phone: 304.647.5200
Fax: 304.647.4812
Toll Free: 1.800.624.6080
State Electric Supply Company
Rt. 10 South, McConnell Addition
P.O. Box 1286
Logan, WV 25601
Phone: 304.752.3161
Fax: 304.752.5945
Toll Free: 1.800.397.0706
UTILITY
Corporate
State Electric Supply Company
2010 2nd Avenue
P.O. Box 5397
Huntington, WV 25703
Phone: 304.523.7491
Fax: 304.525.8917
Toll Free: 1.800.624.3417
State Electric Supply Company
3069 University Avenue
Morgantown, WV 26505
Phone: 304.598.1131
Fax: 304.598.8740
Toll Free: 1.800.258.2454
State Electric Supply Company
4601 Camden Avenue
P.O. Box 1605
Parkersburg, WV 26102
Phone: 304.424.8100
Fax: 304.424.8144
Toll Free: 1.800.642.2630
State Electric Supply Company
108 Walnut Street
Princeton, WV 24740
Phone: 304.425.1718
Fax: 304.425.1752
39
DISTRIBUTION
Products
2SBH36HH1
Nylon Thread
Crossarm Pin
High Voltage
Forged Steel
Pin
Machine Bolt
AR111FFB
Overhead Switch
GH6ILS
881P
Low Voltage
Insulator Pin
Guy Hook
Crossarm Brace
6575
Strain Plate
6461
TSC86
Guy Clamp
Trunnion
Suspension
Clamp
6482
Polymer
Line Post
Insulator
Wildlife Protector
C2070047
Secondary Racks
4010150215
®
881
Lead Top Pin
With Steel Bolt
ADS48N
Polymer Deadend
Insulator
ISBM18CT
Deadend
Strain Clamp
Aluminum
Transformer
Bracket
Stirrup Clamp
BC2/0
2172597324
Support
Bracket
C15M36
AH4GP
Arrester
Hot Line Clamp
P8171176
8812 & 6813
2172597324
Polymer Arrester
6984
Dead End Clevis
0327
6510
Guy
Wire
Clip
Lashing
Clamps
7903
215ELA15
Polymer
Elbow
Arrester
Lag Screw
Type Pin
Suspension
Clamp
TM
PS6235
Lag & Plate for
Detachable Pole Step
Multi-Tap
9U07BAF100
2172597324
DM40B2
Cutout & Arrester Bracket
74001PPT
Electronic Sectionaliz
Dead End Clevis
96FRPE
G5061
Bonding
Clamp
Ground Rod
Clamp
Automatic
Guy
Deadend
Ground Rod
Cable Guard
Strap
C1020024
PC1730BA12
Polymer
Concrete
or Fiberglass
Box Pad
GEP5A
Pole Eye Plate
GS16096CC2
6482
9000
Suspension
Clamp
Guy
Wire
Clip
Lashing
Clamps
7903
Suspension
Clamp
Fiberglass
Guy Strain
Insulator
96FRPE
Guy Marke
C6CS024
PS6236
Junction
E1020044
Padmounted
Switch
6510
8812 & 6813
Thimble Eye
Anchors
Thimble Eye Nut
Machine Bolt & Washer
7903
By-Pa
Switch
6510
Thimble Eye Bolt
KS12
www.hubbellpowersystems.com
www.stateelectric.com
625TBT
Deadbreak
Elbow
Conduit
Standoff
Bracket
TM
Detachable
Pole Step
PS6235
Lag & Plate for
Detachable Pole Step
G506
Bond
Clam
C2030344
Ground Rod
Clamp
9U01AAD643
Loadbreak
Elbow
215J4U
Multi-Tap
PG1730CAL050
Polymer
Concrete
or Fiberglass
Enclosure
Polymer
Elbow
Arrester
BPRD0
Pole Step
Double Arming Bolt
Insulated Clevis
Cutout
506125
0327
GDE5100
C710112PB
®
8872
C215J4B
Grounded Bushing
Arrester
Polymer Arrester
Guy Marker
C2030344
2172597324
Support
Bracket
Alley Arm Brace
C615880
Motor
Operator
ISBM18CT
Deadend
Strain Clamp
Machine Bolt & Square Washer
215ELA15
215J4U
881
Lead Top Pin
With Steel Bolt
ADS48N
Polymer Deadend
Insulator
6984
9U01AAD643
Loadbreak
Elbow
4010150215
469
Conduit
Standoff
Bracket
Detachable
Pole Step
Guy Wire Clip
Secondary Racks
8812 & 6813
Fiberglass
Guy Strain
Insulator
C6CS024
PS6236
875
GS16096CC2
6482
9000
6482
C2070047
®
Pole Eye Plate
8812 & 6813
Suspension
Clamp
Polymer Cutout
GEP5A
Machine Bolt & Washer
Guy Clamp
Polymer
Line Post
Insulator
Thimble Eye Nut
Thimble Eye Bolt
Low Voltage
Insulator Pin
6461
80S015-0109
C710112PB
Aluminum D
Connector
881P
Guy Hook
Trunnion
Suspension
Clamp
By-Pass
Switch
Pole Step
6510
GH6ILS
6575
TSC86
BPRD061
506125
8872
Double Arming Bolt
7903
Cutout
GM125A
4717
High Voltage
Forged Steel
Pin
Machine Bolt
Strain Plate
Electronic Sectionalizer
C710112PB
2SBH36HH1
Fiberglass Bi-Unit
8706
Crossarm Brace
74001PPT
®
• UV stabilized pultruded fiberglass
• External and internal UV protectiv
• High density, closed cell, expanda
PSC8620066
Single-Phase• Field drillable design or custom fa
Recloser
• Environmentally friendly - no chem
preservatives
• Alternative and superior product to
crossarms without the additonal c
treatments and disposal
2216097224 • Lighter than wood with consistent
Polymer Riser
Pole Arrester properties
• Improves overall system insulation
• Quicker installation with no assem
units shipped ready to be installed
• Cross-sectional profile meets REA
guidelines
96KG12
• Compatible installation with saddl
U Cable
crossarms
Guard
• REA drill patterns available
7130
Cutout & Arrester Bracket
469
DISTRIBUT
Nylon Thread
Crossarm Pin
DM40B2
Alley Arm Brace
Your
Source for
Features and Benefits
881P
Motor
Operator
Machine Bolt & Square Washer
Insulated Clevis
Fibergl
GS570
Guy Wire Clip
80S015-0109
Lag Screw
Type Pin
Aluminum Distribution
Connector
GL4042A
Automatic Splice
4717
8706
7130
875
GM125A
Fiberglass Bi-Unit
881P
C615880
Motor
Operator
9U07BAF100
Grounded Bushing
Ground Rod
Padmounted
Switch
PC1730BA12
Polymer
Concrete
or Fiberglass
Box Pad
www.hubbellpowersyste
www.stateelectric.c
©Copyright 2011 Hubbell Inc.
E
SE State
Supply
Customer Focused, Quality
Electric
SE State
Supply Company
Customer Focused, Quality Driven
MacLe
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Instance ID : uuid:65e04d7e-ff8a-4efa-95ca-3d0300b82adb Document ID : xmp.did:D4D54328EFFBE011B4499FDCB08BC75F Original Document ID : adobe:docid:indd:2d5a3b61-95ae-11df-8130-ea05cd8a68f5 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:A730429BE4FBE011B4499FDCB08BC75F Derived From Document ID : xmp.did:20009A70C6B3E01180BBA8EF321CC1C3 Derived From Original Document ID: adobe:docid:indd:2d5a3b61-95ae-11df-8130-ea05cd8a68f5 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:C7F2059C7388E011BF7CD04797373385, xmp.iid:C8F2059C7388E011BF7CD04797373385, xmp.iid:41C105AD7388E011BF7CD04797373385, xmp.iid:E926878CC79DE0119D79A11C9174AEBF, xmp.iid:D808D92ACD9DE0119D79A11C9174AEBF, xmp.iid:C66EC208B9B3E01180BBA8EF321CC1C3, xmp.iid:421F7060C6B3E01180BBA8EF321CC1C3, xmp.iid:431F7060C6B3E01180BBA8EF321CC1C3, xmp.iid:20009A70C6B3E01180BBA8EF321CC1C3, xmp.iid:827776329AB5E01180BBA8EF321CC1C3, xmp.iid:5E3B86CB9BB5E0119A7D8B73930D16F8, xmp.iid:3EBBA47E9CB5E0119A7D8B73930D16F8, xmp.iid:BEDD7F5A46B6E0119A7D8B73930D16F8, xmp.iid:DE6CEFAD46B6E0119A7D8B73930D16F8, xmp.iid:E58D179947B6E0119A7D8B73930D16F8, xmp.iid:F7FCD0F747B6E0119A7D8B73930D16F8, xmp.iid:690BEA0849B6E0119A7D8B73930D16F8, xmp.iid:FACB6F834AB6E0119A7D8B73930D16F8, xmp.iid:BAB53C7C4BB6E0119A7D8B73930D16F8, xmp.iid:BCCDB8B24BB6E0119A7D8B73930D16F8, xmp.iid:5BCDB8854CB6E0119A7D8B73930D16F8, xmp.iid:8B36341E4EB6E0119A7D8B73930D16F8, xmp.iid:E3C8D8C655B6E0119A7D8B73930D16F8, xmp.iid:E4C8D8C655B6E0119A7D8B73930D16F8, xmp.iid:32D27F0F58B6E0119A7D8B73930D16F8, xmp.iid:7628AF4D58B6E0119A7D8B73930D16F8, xmp.iid:5D14828458B6E0119A7D8B73930D16F8, xmp.iid:E66DE5E758B6E0119A7D8B73930D16F8, xmp.iid:EFE282D059B6E0119A7D8B73930D16F8, xmp.iid:8317DAF459B6E0119A7D8B73930D16F8, xmp.iid:DC2EBE0F5AB6E0119A7D8B73930D16F8, xmp.iid:2FCE4B165BB6E0119A7D8B73930D16F8, xmp.iid:1CC3ACD25BB6E0119A7D8B73930D16F8, xmp.iid:11BB5F345FB6E0119A7D8B73930D16F8, xmp.iid:3FC30B0960B6E0119A7D8B73930D16F8, xmp.iid:BE2A190161B6E0119A7D8B73930D16F8, xmp.iid:F762797861B6E0119A7D8B73930D16F8, xmp.iid:A489166962B6E0119A7D8B73930D16F8, xmp.iid:A23B23BF62B6E0119A7D8B73930D16F8, xmp.iid:A75EDA3921B7E0119A7D8B73930D16F8, xmp.iid:812C283522B7E0119A7D8B73930D16F8, xmp.iid:7B01A2B122B7E0119A7D8B73930D16F8, xmp.iid:EBE16AD422B7E0119A7D8B73930D16F8, xmp.iid:CEE03AB924B7E0119A7D8B73930D16F8, xmp.iid:5EBEAC1325B7E0119A7D8B73930D16F8, xmp.iid:C5BF6D8825B7E0119A7D8B73930D16F8, xmp.iid:173D95D227B7E0119A7D8B73930D16F8, xmp.iid:FE145C5C28B7E0119A7D8B73930D16F8, xmp.iid:E1D9ED9328B7E0119A7D8B73930D16F8, xmp.iid:15C39B6729B7E0119A7D8B73930D16F8, xmp.iid:B54CF8A2EBB7E0119A7D8B73930D16F8, xmp.iid:C021BCD5EFB7E0119A7D8B73930D16F8, xmp.iid:8AF067EFEFB7E0119A7D8B73930D16F8, xmp.iid:2FD626FBEFB7E0119A7D8B73930D16F8, xmp.iid:30D626FBEFB7E0119A7D8B73930D16F8, xmp.iid:763FAD19F1B7E0119A7D8B73930D16F8, xmp.iid:450C21FBF3B7E0119A7D8B73930D16F8, xmp.iid:38225D6AF5B7E0119A7D8B73930D16F8, xmp.iid:FB857EF9F5B7E0119A7D8B73930D16F8, xmp.iid:68EFE24AF6B7E0119A7D8B73930D16F8, xmp.iid:C861C1BBB4B8E011BDBFFEB0B8AF0311, xmp.iid:81F3810CB5B8E011BDBFFEB0B8AF0311, xmp.iid:C16F9CF1B6B8E011BDBFFEB0B8AF0311, xmp.iid:FA52650281B9E011BDBFFEB0B8AF0311, xmp.iid:0B3A57D481B9E011BDBFFEB0B8AF0311, xmp.iid:F1C028A683B9E011BDBFFEB0B8AF0311, xmp.iid:FA0F99BE83B9E011BDBFFEB0B8AF0311, xmp.iid:24C37BCE83B9E011BDBFFEB0B8AF0311, xmp.iid:A58EEE6784B9E011BDBFFEB0B8AF0311, xmp.iid:9FC61A0DC2BBE01199C6861A72EA38B3, xmp.iid:6D5FCE30C3BBE01199C6861A72EA38B3, xmp.iid:AF4E4D39C4BBE01199C6861A72EA38B3, xmp.iid:643D9E05C5BBE01199C6861A72EA38B3, xmp.iid:D7653919C7BBE01199C6861A72EA38B3, xmp.iid:9F5CE645C7BBE01199C6861A72EA38B3, xmp.iid:08C63167C8BBE01199C6861A72EA38B3, xmp.iid:8FD73DA2C8BBE01199C6861A72EA38B3, xmp.iid:90D73DA2C8BBE01199C6861A72EA38B3, xmp.iid:8F0EB436E1BBE01199C6861A72EA38B3, xmp.iid:14C48A48E3BBE01199C6861A72EA38B3, xmp.iid:C47E6273E3BBE01199C6861A72EA38B3, xmp.iid:5B26EAE4E5BBE01199C6861A72EA38B3, xmp.iid:A9C9409428BDE01194B5904DA0874AC8, xmp.iid:B1A5409C71BDE01189D5CC6EB74BC462, xmp.iid:CFAFC04D73BDE01189D5CC6EB74BC462, xmp.iid:EC599B5E37BEE01189D5CC6EB74BC462, xmp.iid:5C3061F23ABEE01189D5CC6EB74BC462, xmp.iid:DBB5B8243CBEE01189D5CC6EB74BC462, xmp.iid:99FA365E3CBEE01189D5CC6EB74BC462, xmp.iid:9AFA365E3CBEE01189D5CC6EB74BC462, xmp.iid:C02F37233EBEE01189D5CC6EB74BC462, xmp.iid:DD6A7ECE3FBEE01189D5CC6EB74BC462, xmp.iid:7877BAEFB8BEE01189D5CC6EB74BC462, xmp.iid:333BA459B9BEE01189D5CC6EB74BC462, xmp.iid:2A0B076CC0BEE01189D5CC6EB74BC462, xmp.iid:BCA2D9D7C1BEE01189D5CC6EB74BC462, xmp.iid:02E31D68C2BEE01189D5CC6EB74BC462, xmp.iid:88F3890EC8BEE01189D5CC6EB74BC462, xmp.iid:D7AB3529CBBEE01189D5CC6EB74BC462, xmp.iid:2ACE35B4CFBEE01189D5CC6EB74BC462, xmp.iid:DE956914D3BEE01189D5CC6EB74BC462, xmp.iid:DF956914D3BEE01189D5CC6EB74BC462, xmp.iid:61190DBA55C0E01189D5CC6EB74BC462, xmp.iid:3935263956C0E01189D5CC6EB74BC462, xmp.iid:F613DB5058C0E01189D5CC6EB74BC462, xmp.iid:FEFE4FAF58C0E01189D5CC6EB74BC462, xmp.iid:A7404EFE58C0E01189D5CC6EB74BC462, xmp.iid:A8404EFE58C0E01189D5CC6EB74BC462, xmp.iid:3F091CED81C0E01189D5CC6EB74BC462, xmp.iid:40091CED81C0E01189D5CC6EB74BC462, xmp.iid:C1F1295683C0E01189D5CC6EB74BC462, xmp.iid:C2F1295683C0E01189D5CC6EB74BC462, xmp.iid:C3F1295683C0E01189D5CC6EB74BC462, xmp.iid:B920A86C85C0E0119F9D91C70FB180DA, xmp.iid:B0BA9CDD85C0E0119F9D91C70FB180DA, xmp.iid:D3A07A3787C0E0119F9D91C70FB180DA, xmp.iid:42B1B4EE87C0E0119F9D91C70FB180DA, xmp.iid:3C648B8090C0E0119F9D91C70FB180DA, xmp.iid:7E14273291C0E0119F9D91C70FB180DA, xmp.iid:5CF7338691C0E0119F9D91C70FB180DA, xmp.iid:5DF7338691C0E0119F9D91C70FB180DA, xmp.iid:BADA850393C0E0119F9D91C70FB180DA, xmp.iid:857D722693C0E0119F9D91C70FB180DA, xmp.iid:867D722693C0E0119F9D91C70FB180DA, xmp.iid:4BE348F293C0E0119F9D91C70FB180DA, xmp.iid:B89B5E2B94C0E0119F9D91C70FB180DA, xmp.iid:1BDB5A7A95C0E0119F9D91C70FB180DA, xmp.iid:F088F43397C0E0119F9D91C70FB180DA, xmp.iid:B906EB9597C0E0119F9D91C70FB180DA, xmp.iid:964D1B9926C1E0119F9D91C70FB180DA, xmp.iid:7A45BDCA27C1E0119F9D91C70FB180DA, xmp.iid:450221AC28C1E0119F9D91C70FB180DA, xmp.iid:27A23CAC29C1E0119F9D91C70FB180DA, xmp.iid:38FB54182BC1E0119F9D91C70FB180DA, xmp.iid:275E453C4AC1E0119F9D91C70FB180DA, xmp.iid:BE75A6E54AC1E0119F9D91C70FB180DA, xmp.iid:39F9D0CF4BC1E0119F9D91C70FB180DA, xmp.iid:9579C8384CC1E0119F9D91C70FB180DA, xmp.iid:329E618C4FC1E0119F9D91C70FB180DA, xmp.iid:CC6D221C50C1E0119F9D91C70FB180DA, xmp.iid:2933760F51C1E0119F9D91C70FB180DA, xmp.iid:84ED883151C1E0119F9D91C70FB180DA, xmp.iid:52F73BCA60C1E0119F9D91C70FB180DA, xmp.iid:36F7BB6763C1E0119F9D91C70FB180DA, xmp.iid:BA1F718263C1E0119F9D91C70FB180DA, xmp.iid:BB1F718263C1E0119F9D91C70FB180DA, xmp.iid:55234AEB64C1E0119F9D91C70FB180DA, xmp.iid:5F2ECEB965C1E01189D5AE067CB908C2, xmp.iid:14AF7613B9C2E01189D5AE067CB908C2, xmp.iid:0FDAAF67BAC2E01189D5AE067CB908C2, xmp.iid:454E0067BCC2E01189D5AE067CB908C2, xmp.iid:01791AADBCC2E01189D5AE067CB908C2, xmp.iid:9392E911C3C2E01189D5AE067CB908C2, xmp.iid:B065E734C3C2E01189D5AE067CB908C2, xmp.iid:B165E734C3C2E01189D5AE067CB908C2, xmp.iid:97C33C17C5C2E01189D5AE067CB908C2, xmp.iid:4ACBB0DDC5C2E01189D5AE067CB908C2, xmp.iid:817ADC35C6C2E01189D5AE067CB908C2, xmp.iid:4037355DF0C2E01189D5AE067CB908C2, xmp.iid:DF062CE3F0C2E01189D5AE067CB908C2, xmp.iid:E0062CE3F0C2E01189D5AE067CB908C2, xmp.iid:CF01318FF3C2E01189D5AE067CB908C2, xmp.iid:01E63244F4C2E01189D5AE067CB908C2, xmp.iid:B4C7043BF5C2E01189D5AE067CB908C2, xmp.iid:CD99BE57F5C2E01189D5AE067CB908C2, xmp.iid:0921723E83C3E011B0B3F6D9A914D608, xmp.iid:7DF0D7A684C3E011B0B3F6D9A914D608, xmp.iid:D274E8CA86C3E011B0B3F6D9A914D608, xmp.iid:ABFDBB96BAC3E011B0B3F6D9A914D608, xmp.iid:9B0F429ABBC3E011B0B3F6D9A914D608, xmp.iid:4FD2B88DBDC3E011B0B3F6D9A914D608, xmp.iid:0DD46979C1C3E011B0B3F6D9A914D608, xmp.iid:ACBB47DBC2C3E011B0B3F6D9A914D608, xmp.iid:71CF59FBC3C3E011B0B3F6D9A914D608, xmp.iid:71539C0A7DC4E011B0B3F6D9A914D608, xmp.iid:2B9E5DB67EC4E011B0B3F6D9A914D608, xmp.iid:7DB2F28880C4E011B0B3F6D9A914D608, xmp.iid:9AC511F680C4E011B0B3F6D9A914D608, xmp.iid:05F3198D82C4E011B0B3F6D9A914D608, xmp.iid:26E3226085C4E011B0B3F6D9A914D608, xmp.iid:478A139985C4E011B0B3F6D9A914D608, xmp.iid:DA95B2D685C4E011B0B3F6D9A914D608, xmp.iid:D65C6FFA87C4E011B0B3F6D9A914D608, xmp.iid:3626E8A188C4E011B0B3F6D9A914D608, xmp.iid:78F4C8798AC4E011B0B3F6D9A914D608, xmp.iid:E3EE0ACC0CC5E011B0B3F6D9A914D608, xmp.iid:607CD6FF11C5E0118A1AFBD1A288D5D4, xmp.iid:27A87C3412C5E0118A1AFBD1A288D5D4, xmp.iid:28A87C3412C5E0118A1AFBD1A288D5D4, xmp.iid:AF84567017C5E0118A1AFBD1A288D5D4, xmp.iid:B084567017C5E0118A1AFBD1A288D5D4, xmp.iid:B19CCEDD1BC5E0118A1AFBD1A288D5D4, xmp.iid:19B90EF821C6E0118A1AFBD1A288D5D4, xmp.iid:EEDEC14924C6E0118A1AFBD1A288D5D4, xmp.iid:846FBEF236C7E011B9C8CCB5C4403CE0, xmp.iid:499CC55D3CC7E011B9C8CCB5C4403CE0, xmp.iid:2B2DE8043DC7E011B9C8CCB5C4403CE0, xmp.iid:1CF795C53DC7E011B9C8CCB5C4403CE0, xmp.iid:59B406333EC7E011B9C8CCB5C4403CE0, xmp.iid:3B0CCAF13EC7E011B9C8CCB5C4403CE0, xmp.iid:F54CF50840C7E011B9C8CCB5C4403CE0, xmp.iid:8BB0582541C7E011B9C8CCB5C4403CE0, xmp.iid:73C89C0642C7E011B9C8CCB5C4403CE0, xmp.iid:E1A7012AFFC7E011B9C8CCB5C4403CE0, xmp.iid:5F769495FFC7E011B9C8CCB5C4403CE0, xmp.iid:07ED84E730C8E011B9C8CCB5C4403CE0, xmp.iid:F9EDB62331C8E011B9C8CCB5C4403CE0, xmp.iid:1D11813432C8E011B9C8CCB5C4403CE0, xmp.iid:7041159332C8E011B9C8CCB5C4403CE0, xmp.iid:87692748E7C8E011B9C8CCB5C4403CE0, xmp.iid:4F0AEAA4E7C8E011B9C8CCB5C4403CE0, xmp.iid:6AC07E2CE8C8E011B9C8CCB5C4403CE0, xmp.iid:6BC07E2CE8C8E011B9C8CCB5C4403CE0, xmp.iid:6CC07E2CE8C8E011B9C8CCB5C4403CE0, xmp.iid:C0B51163E9C8E011B9C8CCB5C4403CE0, xmp.iid:F2C5EED5E9C8E011B9C8CCB5C4403CE0, xmp.iid:2AD7715EEAC8E011B9C8CCB5C4403CE0, xmp.iid:2BD7715EEAC8E011B9C8CCB5C4403CE0, xmp.iid:8D9ADAD9ADC9E011B9C8CCB5C4403CE0, xmp.iid:AABE31F0AEC9E011B9C8CCB5C4403CE0, xmp.iid:3C4859D1B0C9E011B9C8CCB5C4403CE0, xmp.iid:AF70ADFBB1C9E011B9C8CCB5C4403CE0, xmp.iid:B070ADFBB1C9E011B9C8CCB5C4403CE0, xmp.iid:B370ADFBB1C9E011B9C8CCB5C4403CE0, xmp.iid:83C92699CCC9E011B9C8CCB5C4403CE0, xmp.iid:94FACC23CEC9E011B9C8CCB5C4403CE0, xmp.iid:28E9E157CFC9E011B9C8CCB5C4403CE0, xmp.iid:95CC0AFFD1C9E011B9C8CCB5C4403CE0, xmp.iid:344E369BFDC9E011B9C8CCB5C4403CE0, xmp.iid:D49408FDFFC9E011B9C8CCB5C4403CE0, xmp.iid:27548BE001CAE011AA05CFB87542F1FD, xmp.iid:CBAD1BE402CAE011AA05CFB87542F1FD, xmp.iid:F07F5E8C03CAE011AA05CFB87542F1FD, xmp.iid:72879C9803CAE011AA05CFB87542F1FD, xmp.iid:6ABDC0D404CAE011AA05CFB87542F1FD, xmp.iid:6BBDC0D404CAE011AA05CFB87542F1FD, xmp.iid:97FD1E058CCAE011AA05CFB87542F1FD, xmp.iid:6CF60D768CCAE011AA05CFB87542F1FD, xmp.iid:A7DF9F538FCAE011AA05CFB87542F1FD, xmp.iid:5B8A0A3F3CD3E011BA1AA161B109475B, xmp.iid:08A54D2875E4E011AB75ACB30AA54C54, xmp.iid:F940667079E4E011AB75ACB30AA54C54, xmp.iid:4DE466937BE4E011AB75ACB30AA54C54, xmp.iid:7E926EC07BE4E011AB75ACB30AA54C54, xmp.iid:A8EEBEDA7BE4E011AB75ACB30AA54C54, xmp.iid:CECB89F07BE4E011AB75ACB30AA54C54, xmp.iid:A582946B7EE4E011AB75ACB30AA54C54, xmp.iid:A682946B7EE4E011AB75ACB30AA54C54, xmp.iid:5C50A3A47FE4E011AB75ACB30AA54C54, xmp.iid:6C06B95D81E4E011AB75ACB30AA54C54, xmp.iid:2BFF30DABEE4E011AB75ACB30AA54C54, xmp.iid:5804377920E9E011AB75ACB30AA54C54, xmp.iid:0A084BC820E9E011AB75ACB30AA54C54, xmp.iid:0B084BC820E9E011AB75ACB30AA54C54, xmp.iid:5285BF8871E9E011AB75ACB30AA54C54, xmp.iid:B99FBB6AD9E9E011AB75ACB30AA54C54, xmp.iid:36EA3681D9E9E011AB75ACB30AA54C54, xmp.iid:37EA3681D9E9E011AB75ACB30AA54C54, xmp.iid:A74D09D3DBE9E011AB75ACB30AA54C54, xmp.iid:79FA590EE0E9E011A4D69AA0D5BB7867, xmp.iid:C7D4F5F35EECE011A4D69AA0D5BB7867, xmp.iid:A730429BE4FBE011B4499FDCB08BC75F, xmp.iid:D4D54328EFFBE011B4499FDCB08BC75F, xmp.iid:D34695ED15FCE011B4499FDCB08BC75F, xmp.iid:08E6CCCE1BFCE011B4499FDCB08BC75F, xmp.iid:91DAA7C516FFE011B4499FDCB08BC75F, xmp.iid:B7DE5DDE1DFFE011B4499FDCB08BC75F, xmp.iid:36E1F73529FFE011B4499FDCB08BC75F, xmp.iid:A5A5AAFD2DFFE011B4499FDCB08BC75F, xmp.iid:FB3419E12FFFE011B4499FDCB08BC75F, xmp.iid:2D1A31F22FFFE011B4499FDCB08BC75F, xmp.iid:68E3A5DE30FFE011B4499FDCB08BC75F, xmp.iid:008673AC9900E111ACE5B67147889401, xmp.iid:7625BA28A500E111ACE5B67147889401, xmp.iid:7B87E8716447E111A390DAACB5D70313, xmp.iid:9947AD08FC4CE111A390DAACB5D70313 History When : 2011:05:27 11:11:34-04:00, 2011:05:27 11:11:34-04:00, 2011:05:27 11:12:02-04:00, 2011:06:23 14:35:20-04:00, 2011:06:23 15:15:33-04:00, 2011:07:21 14:22:21-04:00, 2011:07:21 14:22:22-04:00, 2011:07:21 14:22:49-04:00, 2011:07:21 14:22:49-04:00, 2011:07:23 22:11:09-04:00, 2011:07:23 22:22:36-04:00, 2011:07:23 22:27:36-04:00, 2011:07:24 18:43:30-04:00, 2011:07:24 18:45:50-04:00, 2011:07:24 18:52:24-04:00, 2011:07:24 18:55:03-04:00, 2011:07:24 19:02:41-04:00, 2011:07:24 19:13:17-04:00, 2011:07:24 19:20:14-04:00, 2011:07:24 19:21:45-04:00, 2011:07:24 19:27:39-04:00, 2011:07:24 19:39:05-04:00, 2011:07:24 20:33:54-04:00, 2011:07:24 20:38:22-04:00, 2011:07:24 20:50:15-04:00, 2011:07:24 20:51:59-04:00, 2011:07:24 20:53:31-04:00, 2011:07:24 20:56:18-04:00, 2011:07:24 21:02:48-04:00, 2011:07:24 21:03:49-04:00, 2011:07:24 21:04:34-04:00, 2011:07:24 21:11:55-04:00, 2011:07:24 21:17:11-04:00, 2011:07:24 21:41:23-04:00, 2011:07:24 21:47:20-04:00, 2011:07:24 21:54:16-04:00, 2011:07:24 21:57:37-04:00, 2011:07:24 22:04:20-04:00, 2011:07:24 22:06:45-04:00, 2011:07:25 20:50:15-04:00, 2011:07:25 20:57:17-04:00, 2011:07:25 21:00:45-04:00, 2011:07:25 21:01:44-04:00, 2011:07:25 21:15:17-04:00, 2011:07:25 21:17:49-04:00, 2011:07:25 21:21:05-04:00, 2011:07:25 21:37:28-04:00, 2011:07:25 21:41:19-04:00, 2011:07:25 21:42:52-04:00, 2011:07:25 21:48:48-04:00, 2011:07:26 20:59:10-04:00, 2011:07:26 21:29:13-04:00, 2011:07:26 21:29:56-04:00, 2011:07:26 21:30:16-04:00, 2011:07:26 21:36:16-04:00, 2011:07:26 21:38:16-04:00, 2011:07:26 21:58:53-04:00, 2011:07:26 22:09:10-04:00, 2011:07:26 22:13:10-04:00, 2011:07:26 22:15:26-04:00, 2011:07:27 20:58:40-04:00, 2011:07:27 21:00:56-04:00, 2011:07:27 21:14:29-04:00, 2011:07:28 21:20:56-04:00, 2011:07:28 21:26:48-04:00, 2011:07:28 21:39:50-04:00, 2011:07:28 21:40:31-04:00, 2011:07:28 21:40:57-04:00, 2011:07:28 21:45:15-04:00, 2011:07:31 18:11:34-04:00, 2011:07:31 18:19:43-04:00, 2011:07:31 18:27:07-04:00, 2011:07:31 18:32:49-04:00, 2011:07:31 18:47:41-04:00, 2011:07:31 18:48:56-04:00, 2011:07:31 18:57:02-04:00, 2011:07:31 18:58:41-04:00, 2011:07:31 21:49:30-04:00, 2011:07:31 21:54:38-04:00, 2011:07:31 22:09:27-04:00, 2011:07:31 22:10:38-04:00, 2011:07:31 22:28:08-04:00, 2011:08:02 12:58-04:00, 2011:08:02 21:40:47-04:00, 2011:08:02 21:52:54-04:00, 2011:08:03 21:16:24-04:00, 2011:08:03 21:42-04:00, 2011:08:03 21:50:34-04:00, 2011:08:03 21:52:10-04:00, 2011:08:03 21:56:16-04:00, 2011:08:03 22:04:50-04:00, 2011:08:03 22:16:47-04:00, 2011:08:04 12:43:52-04:00, 2011:08:04 12:46:50-04:00, 2011:08:04 13:37:27-04:00, 2011:08:04 13:47:38-04:00, 2011:08:04 13:51:40-04:00, 2011:08:04 14:32:06-04:00, 2011:08:04 14:54:20-04:00, 2011:08:04 15:26:51-04:00, 2011:08:04 15:51:01-04:00, 2011:08:04 15:57:02-04:00, 2011:08:06 13:58:44-04:00, 2011:08:06 14:02:18-04:00, 2011:08:06 14:17:16-04:00, 2011:08:06 14:19:55-04:00, 2011:08:06 14:22:07-04:00, 2011:08:06 14:31:24-04:00, 2011:08:06 19:15:08-04:00, 2011:08:06 19:22:22-04:00, 2011:08:06 19:25:14-04:00, 2011:08:06 19:26:06-04:00, 2011:08:06 19:29:28-04:00, 2011:08:06 19:40:10-04:00, 2011:08:06 19:43:20-04:00, 2011:08:06 19:53-04:00, 2011:08:06 19:58:07-04:00, 2011:08:06 20:59:28-04:00, 2011:08:06 21:04:26-04:00, 2011:08:06 21:06:47-04:00, 2011:08:06 21:13:15-04:00, 2011:08:06 21:17:27-04:00, 2011:08:06 21:18:25-04:00, 2011:08:06 21:21:28-04:00, 2011:08:06 21:24:07-04:00, 2011:08:06 21:25:43-04:00, 2011:08:06 21:35:05-04:00, 2011:08:06 21:47:26-04:00, 2011:08:06 21:50:10-04:00, 2011:08:07 14:53:54-04:00, 2011:08:07 15:02:27-04:00, 2011:08:07 15:08:45-04:00, 2011:08:07 15:15:54-04:00, 2011:08:07 15:26:05-04:00, 2011:08:07 19:09-04:00, 2011:08:07 19:13:44-04:00, 2011:08:07 19:20:17-04:00, 2011:08:07 19:23:13-04:00, 2011:08:07 19:47:02-04:00, 2011:08:07 19:51:03-04:00, 2011:08:07 19:57:51-04:00, 2011:08:07 19:58:48-04:00, 2011:08:07 22:08:30-04:00, 2011:08:07 22:09:10-04:00, 2011:08:07 22:09:55-04:00, 2011:08:07 22:19:12-04:00, 2011:08:07 22:20-04:00, 2011:08:07 22:25:47-04:00, 2011:08:09 14:54:57-04:00, 2011:08:09 15:04:28-04:00, 2011:08:09 15:18:45-04:00, 2011:08:09 15:20:43-04:00, 2011:08:09 16:06:29-04:00, 2011:08:09 16:07:28-04:00, 2011:08:09 16:20:23-04:00, 2011:08:09 16:20:57-04:00, 2011:08:09 16:26:30-04:00, 2011:08:09 16:28:58-04:00, 2011:08:09 21:30:43-04:00, 2011:08:09 21:34:28-04:00, 2011:08:09 21:39:28-04:00, 2011:08:09 21:53:35-04:00, 2011:08:09 21:58:39-04:00, 2011:08:09 22:05:33-04:00, 2011:08:09 22:06:21-04:00, 2011:08:10 15:02:07-04:00, 2011:08:10 15:12:12-04:00, 2011:08:10 15:27:31-04:00, 2011:08:10 21:38:18-04:00, 2011:08:10 21:45:33-04:00, 2011:08:10 21:59:31-04:00, 2011:08:10 22:27:35-04:00, 2011:08:10 22:37:29-04:00, 2011:08:10 22:45:32-04:00, 2011:08:11 20:50:14-04:00, 2011:08:11 21:02:12-04:00, 2011:08:11 21:15:15-04:00, 2011:08:11 21:18:18-04:00, 2011:08:11 21:29:41-04:00, 2011:08:11 21:49:54-04:00, 2011:08:11 21:51:29-04:00, 2011:08:11 21:53:13-04:00, 2011:08:11 22:08:32-04:00, 2011:08:11 22:13:13-04:00, 2011:08:11 22:26:24-04:00, 2011:08:12 13:59:17-04:00, 2011:08:12 14:36:31-04:00, 2011:08:12 14:38-04:00, 2011:08:12 14:59:49-04:00, 2011:08:12 15:15:28-04:00, 2011:08:12 15:21:13-04:00, 2011:08:12 15:47:09-04:00, 2011:08:13 23:03:21-04:00, 2011:08:13 23:19:58-04:00, 2011:08:15 08:06:03-04:00, 2011:08:15 08:44:50-04:00, 2011:08:15 08:49:31-04:00, 2011:08:15 08:54:54-04:00, 2011:08:15 08:57:57-04:00, 2011:08:15 09:03:17-04:00, 2011:08:15 09:11:06-04:00, 2011:08:15 09:19:03-04:00, 2011:08:15 09:25:21-04:00, 2011:08:16 07:59:15-04:00, 2011:08:16 08:02:16-04:00, 2011:08:16 13:55:18-04:00, 2011:08:16 13:56:59-04:00, 2011:08:16 14:04:37-04:00, 2011:08:16 14:07:16-04:00, 2011:08:17 11:40:49-04:00, 2011:08:17 11:43:25-04:00, 2011:08:17 11:47:12-04:00, 2011:08:17 11:48:03-04:00, 2011:08:17 11:51:55-04:00, 2011:08:17 11:55:53-04:00, 2011:08:17 11:59:06-04:00, 2011:08:17 12:02:55-04:00, 2011:08:17 12:15:08-04:00, 2011:08:18 11:22:14-04:00, 2011:08:18 11:30:01-04:00, 2011:08:18 11:43:28-04:00, 2011:08:18 11:51:49-04:00, 2011:08:18 11:52:57-04:00, 2011:08:18 14:23:02-04:00, 2011:08:18 15:02:20-04:00, 2011:08:18 15:13:22-04:00, 2011:08:18 15:21:59-04:00, 2011:08:18 15:40:58-04:00, 2011:08:18 20:53:08-04:00, 2011:08:18 21:10:12-04:00, 2011:08:18 21:23:43-04:00, 2011:08:18 21:30:58-04:00, 2011:08:18 21:35:41-04:00, 2011:08:18 21:36:01-04:00, 2011:08:18 21:44:51-04:00, 2011:08:19 13:40:35-04:00, 2011:08:19 13:52:35-04:00, 2011:08:19 13:55:44-04:00, 2011:08:19 14:16:15-04:00, 2011:08:30 15:14:13-04:00, 2011:09:21 13:14:25-04:00, 2011:09:21 13:45:04-04:00, 2011:09:21 14:00:22-04:00, 2011:09:21 14:01:38-04:00, 2011:09:21 14:02:22-04:00, 2011:09:21 14:02:58-04:00, 2011:09:21 14:20:44-04:00, 2011:09:21 14:29:02-04:00, 2011:09:21 14:29:29-04:00, 2011:09:21 14:41:49-04:00, 2011:09:21 22:01:57-04:00, 2011:09:27 11:50:50-04:00, 2011:09:27 11:53:03-04:00, 2011:09:27 12:22:56-04:00, 2011:09:27 21:31:05-04:00, 2011:09:28 09:54:42-04:00, 2011:09:28 09:55:20-04:00, 2011:09:28 10:09:14-04:00, 2011:09:28 10:11:56-04:00, 2011:09:28 10:42:14-04:00, 2011:10:01 14:55:38-04:00, 2011:10:21 10:15:40-04:00, 2011:10:21 10:15:41-04:00, 2011:10:21 14:53:13-04:00, 2011:10:21 15:35:18-04:00, 2011:10:25 10:36:49-04:00, 2011:10:25 11:27:37-04:00, 2011:10:25 12:48:48-04:00, 2011:10:25 13:23:01-04:00, 2011:10:25 13:36:32-04:00, 2011:10:25 13:37:01-04:00, 2011:10:25 13:43:38-04:00, 2011:10:27 08:46:22-04:00, 2011:10:27 10:08:35-04:00, 2012:01:25 09:54:13-05:00, 2012:02:01 12:41:56-05:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2012:02:01 12:54:43-05:00 Modify Date : 2012:02:01 12:55:39-05:00 Metadata Date : 2012:02:01 12:55:39-05:00 Creator Tool : Adobe InDesign CS5 (7.0) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 11672 bytes, use -b option to extract), (Binary data 3360 bytes, use -b option to extract) Doc Change Count : 23483 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 40 Creator : Adobe InDesign CS5 (7.0)EXIF Metadata provided by EXIF.tools