Product Detail Manual
2014-06-03
: Pdf 106374-Attachment 106374-Attachment 086071 Batch4 unilog
Open the PDF directly: View PDF 
.
Page Count: 472 [warning: Documents this large are best viewed by clicking the View PDF Link!]
2009
MAIN CATALOG
Reaming Milling Threading Drilling
www.precisiondormer.com2
How to Use This Catalog
To order our products, or if you have any questions, please contact our customer service team at the numbers
listed below, or contact cs@precisondormer.com. To fi nd a distributor in your area, please visit our web site.
USA
301 Industrial Avenue
Crystal Lake, IL 60012
Phone: 1-800-877-3745
Fax: 1-815-459-2804
Hours: M-F 7a.m.-5p.m. CST
CANADA
2550 Meadowvale Blvd, Unit 3
Mississauga, ON L5N 8C2
Phone: 1-888-336-7637
En Français: 1-888-368-8457
Fax: 905-542-7000
Hours: M-F 8a.m.-5p.m. EST
AMG Charts
Our AMG (Application Material Group) Charts are located at the front of each tool section and are designed to
give you all the product information you will need to fi nd the best tool quickly.
In the AMG example seen below (see page 12 - Solid Carbide Drill AMG), you can fi nd this information:
How to use the
chart to fi nd
operating parameters
Tool features
Product pages:
• Features
• Drawings
• Sizes
• Order Codes
Customer Service, Sales and Technical Support
Application Material
Groups
Product pages
(see below)
www.precisiondormer.com 3
B-
C
E
D
M
Q
L
Style Index (Alpha/Numeric Order) 4
DRILLS
Table of Contents .............................................................6
Technical (Feed Rates) ....................................................9
SOLID CARBIDE DRILLS
AMG Chart (Products Follow) .......................................12
HSS DRILLS
Stub Drills AMG Chart (Products Follow) .....................26
Jobber Drills AMG Chart (Product Follow) ....................54
Taper Length Drills AMG Chart (Product Follow) ........108
Extra Length Drills AMG Chart (Products Follow) ......136
Taper/Redc’d Shank AMG Chart (Products Follow) ...152
Special Purp./Sets AMG Chart (Products Follow) ......166
TAPS and DIES
Table of Contents .........................................................182
AMG Charts ................................................................186
Technical Charts ..........................................................201
Straight Flute Taps ....................................................... 211
Spiral Point Taps ..........................................................252
Spiral Flute Taps ..........................................................285
Thread Forming Taps ..................................................308
Pipe Taps .....................................................................322
Drill and Tap, Wrenches & Dies ...................................336
SOLID CARBIDE END MILLS
Table of Contents .........................................................345
Technical (Feed Rates) ................................................346
AMG Chart (Products Follow) .....................................348
HSS END MILLS
Table of Contents .........................................................391
Technical (Feed Rates) ................................................392
AMG Chart (Products Follow) .....................................394
REAMERS, MISC
Table of Contents .........................................................437
Technical (Feed Rates) ................................................438
AMG Chart (Products Follow) .....................................440
Quick Search by
Tool Style on
next page
Table of Contents
www.precisiondormer.com4
Product Index by Style
A
Drills
Solid Carbide
HSS Stub
HSS Jobber
HSS Taper Length
HSS Extra Length
HSS Taper/Red. Shank
Special Purpose
Taps/Dies
Straight Flute
Spiral Point
Spiral Flute
Thread Forming
Taper Pipe
Miscellaneous Taps
Dies
End Mills
Solid Carbide
HSS
Reamers
Counterbores
Countersinks
Application/
Material Guides
Drills
SC End Mills
HSS End Mills
Reamers/Counterbores
Feed Rate Charts
8
346
392
438
12
26
54
108
136
152
166
186
190
194
196
198
200
200
348
394
440
441
442
M
Drills
Taps/Dies
SC End Mills
HSS End Mills
Reamers/Counterbores
Countersinks
Guide to Icons
11
203
348
394
440
442
68
66
34
65
172
172
173
173
150
60
28
58
59
62
110
30
33
64
112
31
138
139
139
175
A002
A012
A022
A141
A217
A218
A221
A236
A345
A510
A520
A553
A554
A577
A578
A597
A720
A907
A916
A927
A976
A977
A978
ATR41
B
B76HA 171
C
430
432
433
435
436
436
141
140
141
140
C191
C192
C291
C292
C391
C392
CO500-12
CO500-6
CO501-12
CO501-6
D
D000
D12F
D12W
D13F
D13M
D21
D31F
D31W
D33F
D33L
D33M
168
18
19
14
14
24
20
21
22
22
24
D33W
D444
D555
DC
Drill Sets
DS-90
23
169
170
25
178
25
E
E000
E001
E002
E003
E005
E006
E007
E008
E009
E010
E011
E012
E013
E015
E016
E017
E018
E025
E026
E027
E028
E029
E035
E036
E037
E038
E039
E040
E041
E042
E043
E044
E045
E046
E048
E049
E050
E051
E052
E053
E054
E055
E057
259
260
294
295
256
257
291
291
310
261
262
296
297
258
258
292
292
252
254
285
286
308
253
255
287
288
309
330
330
331
331
299
263
264
299
263
298
298
300
242
243
264
265
E058
E059
E060
E061
E064
E069
E071
E074
E079
E080
E085
E094
E097
E098
E099
E1302
E1302G
E1302V
E1304
E1304G
E1304V
E2302
E2304
E3302
E3302G
E3302M
E3302MG
E3302MV
E3302V
E3303
E3303G
E3303V
E3304
E3304G
E3304M
E3304MG
E3304MV
E3304V
E3603
E3603G
E3603V
E4302
E4304
E500
E501
E513
E547
E550
E6302
E6302G
300
242
265
212
309
289
214
310
290
313
293
311
311
312
312
355
356
356
374
374
375
357
375
357
358
360
361
362
359
372
373
373
376
377
379
380
381
378
354
354
355
368
386
244
247
248
332
333
369
370
E6302V
E6304
E6304G
E6304V
E650, E651
E653
E710
EB3302
EB3302G
EB3302M
EB3302MG
EB3302MV
EB3302V
EB3304
EB3304G
EB3304M
EB3304MG
EB3304MV
EB3304V
EB4302
EB4304
EB6302
EB6302G
EB6302V
EB6304
EB6304G
EB6304V
EZ10P
EZ18P
EZ40G
EZ40P
EZ41G
EZ41P
EZ51P
370
387
388
388
335
336
322
363
364
366
367
368
365
382
383
385
386
384
384
369
387
371
371
372
389
389
390
84
84
43
44
45
45
126
G
G135
G136
G137
G138
G154
465
466
466
467
467
H
HX10
HX15
HX18
L
L10
L18
L209
L40
106
107
158
53
85
85
86
M40CO
M41CO
M42C0
M51CO
M52CO
40
41
40
123
124
Q
QC0860P
QC1290P
QC21
QC21CO
QC21COM
QC21G
QC21GM
QC21M
QC21P
QC21PM
QC21V
QC41
QC41CO
QC41G
QC41P
QC91
QC91CO
QC91COM
QC91G
QC91GM
QC91M
QC91P
QC91PM
QC91V
146
148
74
70
71
73
76
77
75
77
72
38
36
37
39
118
114
115
117
120
121
119
122
116
R
R002
R022
R08
R09
R10
R10A
R10B
R10CO
R10H
R10P
R10PM
R10S
R15
R15A
R15B
R15CO
R15P
R18
16
15
102
133
91
89
87
78
103
97
100
106
93
90
88
80
99
92
www.precisiondormer.com 5
0860
2A
2AB
2ACO
60B
76HA
76LO
1301
Product Index by Style (con’t)
R18A
R18B
R18CO
R18H
R18P
R18S
R40
R40C
R41
R41C
R42
R42C
R51
R51FS
R51K
R51OH
R52
R52FS
R53OH
R55
R55FS
R56
R56CO
R57
R58
R88CO
R89CO
RTDA
89
88
79
104
98
105
50
46
51
47
52
48
128
134
127
125
129
134
125
130
135
163
162
164
165
83
83
390
S
SETS
S209
SM8
SPL, SPLG
SPR, SPRG
SPS, SPSG
SS300
SS400
178
159
176
174
174
174
457
457
T
T100
T110
T400
TC9002
TC9003
TC9008
TC9009
TN1500(UNC)
TN1500(UNF)
TN1534(UNC)
TN1534(UNF)
TN1541(NPT)
211
211
458
401
404
403
406
229
229
269
269
323
TN1543(NPTF)
TN1585 (UNC)
TN1585(UNF)
TN1785
TN9002
TN9003
TN9008
TN9009
TN920
TN921
TN923
TN940
TN943
TN945
TN946
TN948
TS10,15,18
TS40, 41
TS51, 52, 55
324
273
273
275
400
404
402
405
411
413
416
420
426
422
424
427
177
177
177
U
U1511 237
0860-883
209
209CO
209OH
229C
4ASM
4ASMCO
411
430
500-6
500-12
501-6
501-12
502-6
502-12
5ATL
5ATS
707, 727, 757
860
883
146
95
94
81
176
171
171
156
154
155
337
49
42
468
468
142
144
143
145
142
144
131
160
468
146
429
900-982
900 423
901
905
907
911
917
919
920
920K
921
922
923
930
931
933
940
941
943
944
945
946
947
948
960
961
962
963
980
981
982
424
412
416
428
428
429
409
410
412
413
415
417
418
418
419
421
425
421
422
423
425
427
407
408
408
407
414
414
415
1215-1301
1215
1290
337
147
338
1500-1788
1500(UNC)
1500(UNF)
1500(UNS)
1500A(UNC)
1500A(UNF)
1500L(UNC)
1500L(UNF)
1500L(UNS)
1500OV(UNC)
1500S
1505(UNC)
1505(UNS)
1508(UNC)
1508(UNF)
1511
1519(UNC)
220
222
223
228
228
230
230
231
231
224
234
235
232
232
149
238
1528(UNC)
1528(UNF)
1528(UNS)
1528S
1534(UNC)
1534(UNF)
1534NE(UNC)
1534NE(UNF)
1534NR(UNC)
1534NR(UNF)
1534NR(UNS)
1541(NPT)
1542(NPS)
1543(NPTF)
1544(NPT)
1545(NPT)
1545A(NPT)
1546(NPTF)
1548(NPT)
1549(NPTF)
1567(NPTF)
1568(NPT)
1572(UNC)
1572(UNF)
1578(UNC)
1578(UNF)
1580(M)
1580(UNC)
1580(UNF)
1582(UNC)
1582(UNF)
1585(UNC)
1585(UNF)
1585A(UNC)
1585A(UNF)
1585NR(UNC)
1585NR(UNF)
1585OV(UNC)
1586(UNC)
1586(UNF)
1587(UNC)
1587(UNF)
1588(UNC)
1588(UNF)
1590(UNC)
1590(UNF)
1591(UNC)
1591(UNF)
1592(NPSF)
1593(UNC)
216
218
218
219
266
267
283
283
276
277
277
323
329
324
325
325
326
326
328
328
327
327
236
237
284
284
316
314
315
301
301
270
271
272
272
278
279
281
302
302
303
303
304
304
306
306
307
307
329
280
1593(UNF)
1595(UNC)
1595(UNF)
1599(M)
1599(UNC)
1599(UNF)
1599SB(M)
280
233
233
241
240
240
241
1600(UNC)
1600(UNF)
1634(UNC)
1634(UNF)
1700(M)
1700S
1785M
1785NR
1788(M)
239
239
268
268
225
227
275
282
305
1800-3850
1800
1813
1815
1816
1985(UNC)
1985(UNF)
1900
1994(UNC)
1994(UNF)
468
149
468
468
274
274
468
334
334
2010
2025
2025S
2510
2325M
2710M
3150
3300(M)
3300(UNC)
3300(UNF)
3306E(UNC)
3306E(UNF)
3850
341
339
340
342
340
343
344
319
317
318
320
321
338
4500-9009
4500
4531
4532
4533
4533S
4535
4536
4537
4543
4579
449
450
455
443
446
447
454
453
448
456
4587
4588
4591
4600
4602
4603
4608
4700
4702
4703
4704
4705
4706
8007
9002
9003
9004
9008
9009
451
452
451
452
464
465
456
461
459
460
463
462
461
338
400
403
406
402
405
Drill Table of Contents
www.precisiondormer.com
6
Style Description Size Point Angle Finish Page No.
18
19
14
24
20
21
22
22
24
23
25
25
16
15
49
42
34
28
30
33
31
43
44
45
45
53
40
38
36
37
39
50
46
51
47
52
48
68
66
65
60
58
59
62
64
74
70
71
73
76
75
72
Solid Carbide
D12F Slow Helix, Short F 135° Bright
D12W Slow Helix, Short W 135° Bright
D13F, D13M 3 Flute Solid Short F , M 150° Bright
D21 Spade Drill F 118° Bright
D31F Short F 140° Bright
D31W Short W 140° Bright
D33F Standard Length F 118° Bright
D33L Standard Length L 118° Bright
D33M Standard Length M 118° Bright
D33W Standard Length W 118° Bright
DC Center Drill No. 60° Bright
DS-90 Spotting Drill F 90° Bright
R002 Standard Length F, W, L, M 118° Bright/TiN
R022 Short F, W, L, M 118° Bright/TiN
Stub
4ASM Heavy-Duty M 135° Steam Oxide
4ASMCO Heavy-Duty M 135° Bronze
A022 TiN-Tipped F,M 135° Bright/TiN
A520 ADX, Quick Helix, CNC Machining F,M 130° TiN
A597 PFX, Cobalt, Deep-Hole Drilling M 130° TiAlN
A720 Micro M 118° Bright
A927 PFX, Cobalt, Deep-Hole Drilling F,M 130° Bright
EZ40G Parabolic F 135° TiN
EZ40P Parabolic F 135° Bright
EZ41G Parabolic W 135° TiN
EZ41P Parabolic W 135° Bright
L40 Left-Hand F 118° Bright
M40, 41, 42CO Heavy-Duty F, W, L 135° Bronze
QC41 Wide-Land Parabolic F,W 135° Steam Oxide
QC41CO Wide-Land Parabolic F,W 135° Bronze
QC41G Wide-Land Parabolic F,W 135° TiN
QC41P Wide-Land Parabolic F,W 135° Bright
R40 General Purpose F 118° Bright
R40C Heavy-Duty F 135° Steam Oxide
R41 General Purpose W 118° Bright
R41C Heavy-Duty W 135° Steam Oxide
R42 General Purpose L 118° Bright
R42C Heavy-Duty L 135° Steam Oxide
Jobber
A002 118°, 4-Facet Point M 118° Bright/TiN
A012 TiN-Tipped F, L, W 118° Bright/TiN
A141 Fast Spiral F 135° Steam Oxide/Bronze
A510 ADX, Quick Helix, CNC Machining F, M 130° TiN
A553 ADX Coolant M 130° TIAlN
A554 ADX Coolant M 130° TIAlN
A577 PFX, Cobalt Deep-Hole M 130° Bright
A907 PFX, Cobalt Deep-Hole F, L,W 130° Bright
QC21 Wide-Land Parabolic F, W 135° Steam Oxide
QC21CO Wide-Land Parabolic F, W, L 135° Bronze
QC21COM Wide-Land Parabolic M 135° Bronze
QC21G Wide-Land Parabolic F, W 135° TiN
QC21GM Wide-Land Parabolic M 135° TiN
QC21P Wide-Land Parabolic F, W, L 135° Bright
QC21V Wide-Land Parabolic F, W 135° TiAlN
Drill Table of Contents
www.precisiondormer.com 7
Style Description Size Point Angle Finish Page No.
Taper
Jobber (con’t)
95
94
81
84
84
85
85
86
106
77
77
102
91
89
87
78
103
97
100
106
93
90
88
80
99
92
89
88
79
104
98
105
83
83
131
110
112
126
123
124
118
114
115
117
120
121
119
122
116
133
128
134
127
125
129
134
2A General Purpose M 118° Bright
2AB General Purpose M 118° Steam Oxide
2ACO Heavy-Duty, Type J M 135° Bronze
EZ10P Parabolic F 135° Bright
EZ18P Parabolic W 135° Bright
HX10 General Purpose F 135° Purple/Bronze
HX15 General Purpose L 135° Purple/Bronze
HX18 General Purpose W 135° Purple/Bronze
L10, L18 Left Hand F, W 118° Bright
QC21M Wide-Land Parabolic M 135° Steam Oxide Oxide
QC21PM Wide-Land Parabolic F 135° Bright
R08 Auto, Tang F, L, W 118° Steam Oxide
R10 General Purpose F 118° Steam Oxide
R10A Heavy-Duty, Type A F 118° Steam Oxide
R10B Heavy-Duty, Type B F 135° Steam Oxide
R10CO Heavy-Duty, Type J F 135° Bronze
R10H High Helix F 118° Bright
R10P General Purpose F 118° Bright
R10PM General Purpose M 118° Bright
R10S Low Helix W 118° Bright
R15 General Purpose L 118° Steam Oxide
R15A Heavy-Duty, Type A L 118° Steam Oxide
R15B Heavy-Duty, Type B L 135° Steam Oxide
R15CO Heavy-Duty, Type J L 135° Bronze
R15P General Purpose L 118° Bright
R18 General Purpose W 118° Steam Oxide
R18A Heavy-Duty, Type A W 118° Steam Oxide
R18B Heavy-Duty, Type B W 135° Steam Oxide
R18CO Heavy-Duty, Type J W 135° Bronze
R18H High Helix W 118° Bright
R18P General Purpose W 118° Bright
R18S Low Helix F 118° Bright
R88CO Heavy-Duty, Type D F 135° Bronze
R89CO Heavy-Duty, Type D W 135° Bronze
5ATL General Purpose F, M 118° Bright, Steam Oxide
A578 PFX M 130° TIAlN
A916 PFX F, M 130° Bright
EZ51P Tanged F 135° Bright
M51CO Heavy-Duty F 135° Bronze
M52CO Heavy-Duty W 135° Bronze
QC91 Wide-Land Parabolic F, W 135° Steam Oxide
QC91CO Wide-Land Parabolic F, W 135° Bronze
QC91COM Wide-Land Parabolic M 135° Bronze
QC91G Wide-Land Parabolic F, W 135° TiN
QC91GM Wide-Land Parabolic M 135° TiN
QC91M Wide-Land Parabolic M 135° Steam Oxide
QC91P Wide-Land Parabolic F, W 135° Bright
QC91PM Wide-Land Parabolic M 135° Bright
QC91V Wide-Land Parabolic F, W 135° TiAlN
R09 Auto Tang F 118° Steam Oxide
R51 General Purpose F 118° Bright
R51FS High Helix F 118° Bright
R51K Tanged F 118° Steam Oxide
R51OH 23° Helix F 118° Bright
R52 General Purpose W 118° Bright
R52FS High Helix W 118° Bright
(con‘t)
Drill Table of Contents
www.precisiondormer.com
8
Style Description Size Point Angle Finish Page No.
Extra Length
Taper Shank/Reduced Shank
Miscellaneous/Special Purpose/Sets
Taper (con’t)
125
130
135
146
147
149
149
144
142
145
143
144
142
150
138
141
140
141
140
146
148
156
154
155
160
158
163
162
164
165
159
176
171
171
172
173
175
171
168
169
170
178
176
174
174
174
177
177
177
R53OH 34° Helix F 118° Bright
R55 General Purpose L 118° Bright
R55FS High Helix L 118° Bright
0860 8” Extra Length F 118° Bright
1290 12” Extra Length F 118° Bright
1511 15” Extra Length F 118° Bright
1813 18” Extra Length F 118° Bright
500-12 Aircraft Extension, Type B F 135° Steam Oxide
500-6 Aircraft Extension, Type B F 135° Steam Oxide
501-12 Aircraft Extension, Type B W 135° Steam Oxide
501-6 Aircraft Extension, Type B W 135° Steam Oxide
502-12 Aircraft Extension, Type B L 135° Steam Oxide
502-6 Aircraft Extension, Type B L 135° Steam Oxide
A345 Taper Shank F, M 118° Steam Oxide
A976, 977, 978 PFX, Cobalt, Deep-Hole Drilling F, W 130° Bright
CO500-12 Heavy-Duty, Cobalt, 12” F 135° Bronze
CO500-6 Heavy-Duty, Cobalt, 6” F 135° Bronze
CO501-12 Heavy-Duty, Cobalt, 12” W 135° Bronze
CO501-6 Heavy-Duty, Cobalt, 6” W 135° Bronze
QC0860P Wide-Land Parabolic F 135° Bright
QC1290P Wide-Land Parabolic F 135° Bright
209 Taper Shank F 118° Steam Oxide
209CO Taper Shank F 135° Bronze
209OH 32°, Taper, Coolant F 118° Steam Oxide
5ATS Taper Shank M 118° Steam Oxide
L209 Large Taper F 118° Steam Oxide
R56 1/2” Reduced Shank, S&D F 118° Bright/Steam Oxide
R56CO 1/2”, Round Red. Shank, S&D F 118° Steam Oxide/Bronze
R57 1/2”, S&D, 3-Flat Shank F 118° Bright/Steam Oxide
R58 1/2”, S&D, Round Shank F 118° Bright/Steam Oxide
S209 Small Taper F 118° Steam Oxide
60B Drill Blank F N/A Bright
76HA Combined/Drill C’Sink, Reg. Lgth No. 60° C’Sink Angle Bright
76LO Combined/Drill C’Sink, Extra Lgth No. 60° Point Angle Bright
A217, A218 Center Drill No. 120° Bright
A221, A236 Center Drill No. 118° Bright
ATR41 Aircraft Taper Router No. N/A Bright
B76HA Combined/Drill C’Sink, Bell Type No. 60/120° Pt. Angle Bright
D000 Carbide-Tipped Die F 118° Bright
D444 Carbide-Tipped Jobber F, W, L 118° Bright
D555 Carbide-Tipped Taper Length F 118° Bright
Drill Sets All
SM8 Body Drill F 135° Split Point Steam Oxide
SPL, SPLG Spotting Drill, Long F 90° or 120° Bright or TiN
SPR, SPRG Spotting Drill, Regular F 90° or 120° Bright or TiN
SPS, SPSG Spotting Drill, Short F 90° or 120° Bright or TiN
TS10,15,18 Threaded Hex Shank, Short F 135° Split Point Steam Oxide
TS40, 41 Threaded Hex Shank, Stub F 135° Split Point Steam Oxide
TS51, 52, 55 Threaded Hex Shank, Long F 135° Split Point Steam Oxide
(con‘t)
www.precisiondormer.com
Size
Feed in Inches per Revolution (IPR) ± 25% Ø Diameter
1mm/
1/32” 2mm/
3/32” 3mm/
1/8” 4mm/
5/32” 5mm/
3/16” 6mm/
1/4” 8mm/
5/16” 10mm/
3/8” 12mm/
1/2” 15mm/
9/16” 16mm/
5/8” 20mm/
3/4” 25mm/
1” 30mm/
1.1/8” 40mm/
1.5/8” 50mm/
2”
A0.0004 0.0009 0.0011 0.0013 0.0014 0.0017 0.0021 0.0024 0.0027 0.0032 0.0034 0.0043 0.0049 0.0053 0.0061 0.0069
B0.0006 0.0011 0.0015 0.0016 0.0018 0.0021 0.0026 0.0031 0.0035 0.0041 0.0043 0.0053 0.0060 0.0065 0.0074 0.0082
C0.0006 0.0013 0.0017 0.0020 0.0022 0.0025 0.0031 0.0039 0.0043 0.0049 0.0051 0.0063 0.0071 0.0077 0.0087 0.0094
D0.0006 0.0015 0.0021 0.0024 0.0027 0.0031 0.0039 0.0047 0.0051 0.0059 0.0061 0.0074 0.0083 0.0090 0.0100 0.0108
E0.0007 0.0017 0.0024 0.0028 0.0031 0.0037 0.0045 0.0055 0.0059 0.0068 0.0071 0.0085 0.0094 0.0102 0.0112 0.0122
F0.0007 0.0020 0.0029 0.0033 0.0037 0.0043 0.0054 0.0065 0.0070 0.0080 0.0083 0.0098 0.0108 0.0116 0.0126 0.0135
G0.0007 0.0022 0.0033 0.0038 0.0043 0.0050 0.0063 0.0075 0.0081 0.0091 0.0094 0.0110 0.0122 0.0130 0.0140 0.0148
H0.0008 0.0026 0.0040 0.0046 0.0051 0.0059 0.0075 0.0090 0.0096 0.0107 0.0110 0.0126 0.0140 0.0148 0.0157 0.0165
I0.0008 0.0030 0.0047 0.0053 0.0059 0.0068 0.0087 0.0104 0.0110 0.0122 0.0126 0.0142 0.0157 0.0165 0.0173 0.0181
J0.0009 0.0033 0.0053 0.0060 0.0067 0.0078 0.0098 0.0117 0.0124 0.0137 0.0142 0.0159 0.0175 0.0183 0.0191 0.0198
K0.0010 0.0036 0.0059 0.0067 0.0075 0.0087 0.0110 0.0130 0.0138 0.0153 0.0157 0.0177 0.0193 0.0201 0.0209 0.0215
L0.0011 0.0040 0.0065 0.0073 0.0082 0.0094 0.0120 0.0142 0.0152 0.0165 0.0169 0.0191 0.0207 0.0215 0.0224 0.0231
M0.0012 0.0043 0.0071 0.0080 0.0089 0.0102 0.0130 0.0154 0.0165 0.0177 0.0181 0.0205 0.0220 0.0228 0.0238 0.0248
N0.0013 0.0047 0.0077 0.0086 0.0095 0.0110 0.0140 0.0165 0.0179 0.0189 0.0193 0.0219 0.0234 0.0242 0.0253 0.0265
S0.0003 0.0006 0.0008 0.0010 0.0012 0.0015 0.0020 0.0031 0.0039 0.0048 0.0051 0.0059
T0.0006 0.0011 0.0016 0.0020 0.0024 0.0028 0.0035 0.0043 0.0051 0.0063 0.0067 0.0075
U0.0010 0.0019 0.0028 0.0031 0.0035 0.0042 0.0055 0.0067 0.0079 0.0088 0.0091 0.0094
V0.0015 0.0027 0.0039 0.0045 0.0051 0.0060 0.0079 0.0098 0.0110 0.0122 0.0126 0.0134
W0.0019 0.0035 0.0051 0.0059 0.0067 0.0079 0.0102 0.0130 0.0150 0.0165 0.0169 0.0177
X0.0022 0.0041 0.0059 0.0071 0.0083 0.0098 0.0130 0.0165 0.0189 0.0210 0.0217 0.0228
Y0.0027 0.0049 0.0071 0.0087 0.0102 0.0125 0.0169 0.0217 0.0276 0.0276 0.0276 0.0291
Z0.0037 0.0068 0.0098 0.0128 0.0157 0.0210 0.0315 0.0394 0.0433 0.0463 0.0472 0.0472
How To Use This Chart to Find Cutting Feed Rate (IPR):
1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code)
2. Find the closest diameter for your cutting application on the chart to fi nd your IPR
Alpha
Code
Easy Calculations:
(inch)
RPM = SFM/D x 3.82
SFM = RPM x D x .262
IPM = IPR x RPM
IPR = IPM ÷ RPM
Inch = mm x .0394
Terms:
D = Drill Diameter
RPM = Revolutions Per Minute
SFM = Surface Feet per Minute
IPM = Inches Per Minute
IPR = Inches Per Revolution
IPR = Inches Per Revolution
Drill Feed Rate Chart - Inches
9
www.precisiondormer.com
Feed in mm per Revolution (IPR) ± 25% Ø Diameter
1mm/
1/32” 2mm/
3/32” 3mm/
1/8” 4mm/
5/32” 5mm/
3/16” 6mm/
1/4” 8mm/
5/16” 10mm/
3/8” 12mm/
1/2” 15mm/
9/16” 16mm/
5/8” 20mm/
3/4” 25mm/
1” 30mm/
1.1/8” 40mm/
1.5/8” 50mm/
2”
How To Use This Chart to Find Cutting Feed Rate (IPR):
1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code)
2. Find the closest diameter for your cutting application on the chart to fi nd your IPR
Alpha
Code
A 0.0102 0.0229 0.0279 0.0330 0.0356 0.0432 0.0533 0.0610 0.0686 0.0813 0.0864 0.1092 0.1245 0.1346 0.1549 0.1753
B 0.0152 0.0279 0.0381 0.0406 0.0457 0.0533 0.0660 0.0787 0.0889 0.1041 0.1092 0.1346 0.1524 0.1651 0.1880 0.2083
C 0.0152 0.0330 0.0432 0.0508 0.0559 0.0635 0.0787 0.0991 0.1092 0.1245 0.1295 0.1600 0.1803 0.1956 0.2210 0.2388
D 0.0152 0.0381 0.0533 0.0610 0.0686 0.0787 0.0991 0.1194 0.1295 0.1499 0.1549 0.1880 0.2108 0.2286 0.2540 0.2743
E 0.0178 0.0432 0.0610 0.0711 0.0787 0.0940 0.1143 0.1397 0.1499 0.1727 0.1803 0.2159 0.2388 0.2591 0.2845 0.3099
F 0.0178 0.0508 0.0737 0.0838 0.0940 0.1092 0.1372 0.1651 0.1778 0.2032 0.2108 0.2489 0.2743 0.2946 0.3200 0.3429
G 0.0178 0.0559 0.0838 0.0965 0.1092 0.1270 0.1600 0.1905 0.2057 0.2311 0.2388 0.2794 0.3099 0.3302 0.3556 0.3759
H 0.0203 0.0660 0.1016 0.1168 0.1295 0.1499 0.1905 0.2286 0.2438 0.2718 0.2794 0.3200 0.3556 0.3759 0.3988 0.4191
I 0.0203 0.0762 0.1194 0.1346 0.1499 0.1727 0.2210 0.2642 0.2794 0.3099 0.3200 0.3607 0.3988 0.4191 0.4394 0.4597
J 0.0229 0.0838 0.1346 0.1524 0.1702 0.1981 0.2489 0.2972 0.3150 0.3480 0.3607 0.4039 0.4445 0.4648 0.4851 0.5029
K 0.0254 0.0914 0.1499 0.1702 0.1905 0.2210 0.2794 0.3302 0.3505 0.3886 0.3988 0.4496 0.4902 0.5105 0.5309 0.5461
L 0.0279 0.1016 0.1651 0.1854 0.2083 0.2388 0.3048 0.3607 0.3861 0.4191 0.4293 0.4851 0.5258 0.5461 0.5690 0.5867
M 0.0305 0.1092 0.1803 0.2032 0.2261 0.2591 0.3302 0.3912 0.4191 0.4496 0.4597 0.5207 0.5588 0.5791 0.6045 0.6299
N 0.0330 0.1194 0.1956 0.2184 0.2413 0.2794 0.3556 0.4191 0.4547 0.4801 0.4902 0.5563 0.5944 0.6147 0.6426 0.6731
S 0.0076 0.0152 0.0203 0.0254 0.0305 0.0381 0.0508 0.0787 0.0991 0.1219 0.1295 0.1499
T 0.0152 0.0279 0.0406 0.0508 0.0610 0.0711 0.0889 0.1092 0.1295 0.1600 0.1702 0.1905
U 0.0254 0.0483 0.0711 0.0787 0.0889 0.1067 0.1397 0.1702 0.2007 0.2235 0.2311 0.2388
V 0.0381 0.0686 0.0991 0.1143 0.1295 0.1524 0.2007 0.2489 0.2794 0.3099 0.3200 0.3404
W 0.0483 0.0889 0.1295 0.1499 0.1702 0.2007 0.2591 0.3302 0.3810 0.4191 0.4293 0.4496
X 0.0559 0.1041 0.1499 0.1803 0.2108 0.2489 0.3302 0.4191 0.4801 0.5334 0.5512 0.5791
Y 0.0686 0.1245 0.1803 0.2210 0.2591 0.3175 0.4293 0.5512 0.7010 0.7010 0.7010 0.7391
Z 0.0940 0.1727 0.2489 0.3251 0.3988 0.5334 0.8001 1.0008 1.0998 1.1760 1.1989 1.1989
Easy Calculations:
(mm)
RPM = [(m/min.) x 1000] ÷ (3.14 x D)
m/min. = SFM ÷ 3.281
mm/min. = (SFM ÷ 3.281) x 1000
mm = Inch ÷ .0394
Terms:
D = Drill Diameter
RPM = Revolutions Per Minute
m/min. = Meters Per Minute (Cutting Speed)
mm/min. = Millimeters Per Minute
mm/rev. = Millimeters Per Revolution
Drill Feed Rate Chart - Metric
10
www.precisiondormer.com
Split
Point 4-Facet
Point Radius
Split Point ADX SP
Coolant
Point
Thinned
Point
Special
Point
Geometry
(A002, A012)
Special
Point
Geometry
(ADX)
Whistle
Notch
Shank
Cylindrical
Shank
High Speed
Steel
Material
High Speed
Cobalt
Material
Coolant
Regular
Helix
21° - 34°
Slow
Helix
10° - 20°
Quick
Helix
35° - 45°
Carbide
(Hard
Metal)
Carbide
Tipped
Straight
Shank Reduced
Shank Shank
with Tang Shank
with
Sq. End
Taper
Shank
Continuously
Thinned
Web
Dormer
Standard Solid
Carbide Tin-Tipped
Steam
Oxide Bright
Finish TiAlN
Top Coat
Bright with
TiN Tip Bronze
Countersink
Angle
Conventional
Point
PFX Point
Continually
Thinned
Web Point
ADX Point Split
Point
Stub/Short
Length Intermediate
Length Jobber/
Standard
Length
Long
Length Extra
Length
Guide to Icons - Drills
Straight
Flute
11
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
www.precisiondormer.com
Solid Carbide Drills
Solid Carbide Drills
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Depth of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 279 S
279 = SFM
S = Alpha Code to find your Feed Rate
To calculate Cutting Feed Rate, refer to chart on pages 9-10.
Page # for easy reference
Ɣ = Good for Application
Ŷ = Excellent for Application
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Style:
Tool Material:
Finish/Coating:
Standard:
Direction of Cut:
Depth of Cut:
Tool Length:
Helix:
Shank:
Point Angle:
Point Style:
Point Type:
12
1
1
2
2
3
3
4
4
2
2
1
1
3
3
D13F
D13M R022 R002
14 15 16-17
Ŷ246V Ŷ246U
Ŷ213V Ŷ213U
Ŷ279U Ŷ213V Ŷ213U
Ŷ230U Ŷ180V Ŷ180U
Ŷ230U Ŷ148U Ŷ148T
Ŷ164T Ŷ148U Ŷ148T
Ŷ148S Ŷ98U Ŷ98T
Ŷ131S Ŷ98U Ŷ98T
Ɣ246V Ŷ246X Ŷ246W
Ɣ246V Ŷ246X Ŷ246W
Ɣ180V Ŷ180X Ŷ180W
Ɣ180V Ŷ180X Ŷ180W
Ɣ131T
Ɣ131T
Ɣ82T
Ɣ72T
Ɣ46S
Ɣ623W Ɣ623V
Ɣ623W Ɣ623V
Ŷ230W
Ɣ508W Ɣ508V
Ɣ656X Ɣ508W Ɣ508V
Ŷ367X Ɣ279W Ɣ279V
Ŷ197X Ɣ148W Ɣ148V
Ɣ148X Ɣ148X
Ɣ246W Ɣ246V
Ŷ105U
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
www.precisiondormer.com
Solid Carbide Drills
Solid Carbide Drills (con‘t)
13
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
D33
(F, W,
L, M) D21 DS-90 DC
22-24 24 25 25
Ɣ279S Ɣ279S Ŷ279S Ɣ279S
Ɣ246S Ɣ246S Ŷ246S Ɣ246S
Ɣ246S Ɣ246S Ŷ246S Ɣ246S
Ɣ230S Ɣ230S Ŷ230S Ɣ230S
Ɣ148S Ɣ148S Ŷ148S Ɣ148S
Ɣ148S Ɣ148S Ŷ148S Ɣ148S
Ɣ98S Ɣ98S Ŷ98S Ɣ98S
Ɣ98S Ɣ98S Ŷ98S Ɣ98S
Ɣ98S Ŷ174S
Ŷ148S
Ɣ246T Ɣ246T Ŷ246T Ɣ246T
Ɣ246T Ɣ246T Ŷ246T Ɣ246T
Ɣ180T Ɣ180T Ŷ180T Ɣ180T
Ɣ180T Ɣ180T Ŷ180T Ɣ180T
Ŷ148T
Ŷ115T
Ŷ82S
Ŷ148T
Ŷ98S
Ŷ66S
Ŷ902V
Ŷ820V Ŷ820V Ŷ820V Ŷ820V
Ŷ820V Ŷ820V Ŷ820V Ŷ820V
Ŷ230T
Ɣ656V Ɣ656V Ŷ656V Ɣ656V
Ɣ656V Ɣ656V Ŷ656V Ɣ656V
Ɣ367V Ɣ367V Ŷ367V Ɣ367V
Ɣ197V Ɣ197V Ŷ197V Ɣ197V
Ŷ197X Ŷ197X Ŷ197X Ŷ197X
Ŷ328V Ŷ328V Ŷ328V Ŷ328V
D31F
D31W
20-21
Ɣ279S
Ɣ246S
Ɣ246S
Ɣ230S
Ɣ148S
Ɣ148S
Ɣ98S
Ɣ98S
Ɣ75S
Ɣ65S
Ɣ246T
Ɣ246T
Ɣ180T
Ɣ180T
Ŷ820V
Ŷ820V
Ɣ656V
Ɣ656V
Ɣ367V
Ɣ197V
Ŷ197X
Ŷ328V
D12F
D12W
18-19
Ɣ279S
Ɣ246S
Ɣ246S
Ɣ230S
Ɣ148S
Ɣ148S
Ɣ98S
Ɣ98S
Ɣ98S
Ɣ98S
Ɣ75S
Ɣ65S
Ɣ246T
Ɣ246T
Ɣ180T
Ɣ180T
Ŷ820V
Ŷ820V
Ɣ656V
Ɣ656V
Ɣ367V
Ɣ197V
Ŷ197X
Ŷ328V
Surface Feet per Minute (SFM)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
14 www.precisiondormer.com
D13F - D13M
D13F
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/8 0.1250 3/4 1.7/8 006008
9/64 0.1406 13/16 1.15/16 006009
5/32 0.1562 7/8 2.1/16 006010
11/64 0.1719 7/8 2.1/8 006011
3/16 0.1875 15/16 2.3/16 006012
13/64 0.2031 1“ 2.1/4 006013
7/32 0.2188 1.1/16 2.3/8 006014
15/64 0.2344 1.1/8 2.7/16 006015
1/4 0.2500 1.3/16 2.1/2 006016
17/64 0.2656 1.1/4 2.5/8 006017
9/32 0.2812 1.5/16 2.11/16 006018
19/64 0.2969 1.3/8 2.3/4 006019
5/16 0.3125 1.7/16 2.13/16 006020
21/64 0.3281 1.1/2 2.15/16 006021
11/32 0.3438 1.1/2 3“ 006022
23/64 0.3594 1.9/16 3.1/16 006023
3/8 0.3750 1.5/8 3.1/8 006024
25/64 0.3906 1.5/8 3.1/4 006025
13/32 0.4062 1.5/8 3.5/16 006026
27/64 0.4219 1.21/32 3.3/8 006027
7/16 0.4375 1.3/4 3.7/16 006028
29/64 0.4531 1.7/8 3.7/16 006029
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
15/32 0.4688 1.7/8 3.5/8 006030
31/64 0.4844 2“ 3.11/16 006031
1/2 0.5000 2“ 3.3/4 006032
33/64 0.5156 2“ 3.7/8 006033
17/32 0.5312 2“ 3.7/8 006034
35/64 0.5469 2.1/8 4“ 006035
9/16 0.5625 2.1/8 4“ 006036
37/64 0.5781 2.1/8 4“ 006037
19/32 0.5938 2.1/8 4“ 006038
39/64 0.6094 2.1/8 4“ 006039
5/8 0.6250 2.1/4 4.1/4 006040
41/64 0.6406 2.1/4 4.1/4 006041
21/32 0.6562 2.1/4 4.1/4 006042
43/64 0.6719 2.1/4 4.1/4 006043
11/16 0.6875 2.7/8 4.5/8 006044
45/64 0.7031 2.7/8 4.5/8 006045
23/32 0.7188 2.7/8 4.5/8 006046
47/64 0.7344 2.7/8 4.5/8 006047
3/4 0.7500 3.1/8 5“ 006048
D13M
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
3.00 0.1181 20 50 006130
3.30 0.1299 20 50 006133
3.50 0.1378 20 50 006135
4.00 0.1575 22 50 006140
4.50 0.1772 24 55 006145
4.80 0.1890 24 55 006148
5.00 0.1969 24 55 006150
5.50 0.2165 29 63 006155
6.00 0.2362 29 63 006160
6.50 0.2559 29 63 006165
6.80 0.2677 34 68 006168
7.00 0.2756 34 68 006170
7.50 0.2953 34 68 006175
8.00 0.3150 38 75 006180
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
8.50 0.3346 38 75 006185
9.00 0.3543 41 80 006190
9.50 0.3740 41 80 006195
10.00 0.3937 41 80 006200
10.20 0.4016 41 84 006202
10.50 0.4134 41 84 006205
10.80 0.4252 44 87 006208
11.00 0.4331 44 87 006210
11.50 0.4528 48 92 006215
12.00 0.4724 48 92 006220
12.50 0.4921 57 102 006225
Ɣ3-Flute
Ɣ Foret extra-court
ƔShort length ƔBroca extra corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 15
www.precisiondormer.com
7.70 0.3031 37 79 0393215 R0227.7
7.80 0.3071 37 79 0393222 R0227.8
7.90 0.3110 37 79 0393239 R0227.9
5/16 7.94 0.3126 37 79 0422656 R0225/16
8.00 0.3150 37 79 0393246 R0228.0
8.10 0.3189 37 79 0393253 R0228.1
8.20 0.3228 37 79 0393260 R0228.2
8.30 0.3268 37 79 0393277 R0228.3
8.40 0.3307 37 79 0393284 R0228.4
Q8.43 0.3319 37 79 0422892 R022Q
8.50 0.3346 37 79 0393291 R0228.5
8.60 0.3386 40 84 0393307 R0228.6
R8.61 0.3390 40 84 0422908 R022R
8.70 0.3425 40 84 0393314 R0228.7
11/32 8.73 0.3437 40 84 0422601 R02211/32
8.80 0.3465 40 84 0393321 R0228.8
8.90 0.3504 40 84 0393338 R0228.9
d1
Øh7
Inch
d1
Øh7
mm
d1
dec.
Inch l2
mm l1
mm
Dormer
Stock
No.
EDP #
or
e-Code
3.00 0.1181 16 46 0392744 R0223.0
3.10 0.1220 18 49 0392751 R0223.1
1/8 3.18 0.1252 18 49 0422595 R0221/8
3.20 0.1260 18 49 0392768 R0223.2
30 3.26 0.1283 18 49 0422700 R022N30
3.30 0.1299 18 49 0392775 R0223.3
3.40 0.1339 20 52 0392782 R0223.4
29 3.45 0.1358 20 52 0422717 R022N29
3.50 0.1378 20 52 0392799 R0223.5
3.60 0.1417 20 52 0392805 R0223.6
3.70 0.1457 20 52 0392812 R0223.7
3.80 0.1496 22 55 0392829 R0223.8
25 3.80 0.1496 22 55 0422724 R022N25
24 3.86 0.1520 22 55 0422731 R022N24
3.90 0.1535 22 55 0392836 R0223.9
5/32 3.97 0.1563 22 55 0422663 R0225/32
4.00 0.1575 22 55 0392843 R0224.0
20 4.04 0.1591 22 55 0422755 R022N20
21 4.04 0.1591 22 55 0422748 R022N21
4.10 0.1614 22 55 0392850 R0224.1
4.20 0.1654 22 55 0392867 R0224.2
4.30 0.1693 24 58 0392874 R0224.3
4.40 0.1732 24 58 0392881 R0224.4
17 4.40 0.1732 24 58 0422762 R022N17
16 4.50 0.1772 24 58 0422779 R022N16
4.50 0.1772 24 58 0392898 R0224.5
4.60 0.1811 24 58 0392904 R0224.6
14 4.62 0.1819 24 58 0422786 R022N14
4.70 0.1850 24 58 0392911 R0224.7
3/16 4.76 0.1874 26 62 0422632 R0223/16
4.80 0.1890 26 62 0392928 R0224.8
4.90 0.1929 26 62 0392935 R0224.9
10 4.92 0.1937 26 62 0422793 R022N10
94.98 0.1961 26 62 0422809 R022N9
5.00 0.1969 26 62 0392942 R0225.0
85.06 0.1992 26 62 0422816 R022N8
5.10 0.2008 26 62 0392959 R0225.1
75.11 0.2012 26 62 0422823 R022N7
5.20 0.2047 26 62 0392966 R0225.2
5.30 0.2087 26 62 0392973 R0225.3
5.40 0.2126 28 66 0392980 R0225.4
35.41 0.2130 28 66 0422830 R022N3
5.50 0.2165 28 66 0392997 R0225.5
7/32 5.56 0.2189 28 66 0422687 R0227/32
d1
Øh7
Inch
d1
Øh7
mm
d1
dec.
Inch l2
mm l1
mm
Dormer
Stock
No.
EDP #
or
e-Code
5.60 0.2205 28 66 0393000 R0225.6
5.70 0.2244 28 66 0393017 R0225.7
5.80 0.2283 28 66 0393024 R0225.8
15.80 0.2283 28 66 0422847 R022N1
5.90 0.2323 28 66 0393031 R0225.9
6.00 0.2362 28 66 0393048 R0226.0
6.10 0.2402 31 70 0393055 R0226.1
6.20 0.2441 31 70 0393062 R0226.2
D6.23 0.2453 31 70 0422854 R022D
6.30 0.2480 31 70 0393079 R0226.3
1/4 6.35 0.2500 31 70 0422588 R0221/4
6.40 0.2520 31 70 0393086 R0226.4
6.50 0.2559 31 70 0393093 R0226.5
F6.53 0.2571 31 70 0422861 R022F
6.60 0.2598 31 70 0393109 R0226.6
6.70 0.2638 31 70 0393116 R0226.7
6.80 0.2677 34 74 0393123 R0226.8
6.90 0.2717 34 74 0393130 R0226.9
I6.91 0.2720 34 74 0422878 R022I
7.00 0.2756 34 74 0393147 R0227.0
7.10 0.2795 34 74 0393154 R0227.1
9/32 7.14 0.2811 34 74 0422694 R0229/32
7.20 0.2835 34 74 0393161 R0227.2
7.30 0.2874 34 74 0393178 R0227.3
7.40 0.2913 34 74 0393185 R0227.4
M7.49 0.2949 34 74 0422885 R022M
7.50 0.2953 34 74 0393192 R0227.5
7.60 0.2992 37 79 0393208 R0227.6
Ɣ Foret extra-court
R022
R022
Ŷ
Ɣ
ƔShort length ƔBroca extra corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
16 www.precisiondormer.com
R022 - R002
d1
Øh7
Inch
d1
Øh7
mm
d1
dec.
Inch l2
mm l1
mm
Dormer
Stock
No.
EDP #
or
e-Code
9.00 0.3543 40 84 0393345 R0229.0
T9.09 0.3579 40 84 0422915 R022T
9.10 0.3583 40 84 0393352 R0229.1
9.20 0.3622 40 84 0393369 R0229.2
9.30 0.3661 40 84 0393376 R0229.3
U9.35 0.3681 40 84 0422922 R022U
9.40 0.3701 40 84 0393383 R0229.4
9.50 0.3740 40 84 0393390 R0229.5
3/8 9.53 0.3752 43 89 0422649 R0223/8
9.60 0.3780 43 89 0393406 R0229.6
9.70 0.3819 43 89 0393413 R0229.7
9.80 0.3858 43 89 0393420 R0229.8
9.90 0.3898 43 89 0393437 R0229.9
25/64 9.92 0.3906 43 89 0422939 R02225/64
10.00 0.3937 43 89 0392683 R02210.0
10.10 0.3976 43 89 0566817 R02210.1
10.20 0.4016 43 89 0392690 R02210.2
Y10.26 0.4039 43 89 0422946 R022Y
10.30 0.4055 43 89 0566824 R02210.3
13/32 10.32 0.4063 43 89 0423240 R02213/32
10.40 0.4094 43 89 0566831 R02210.4
10.50 0.4134 43 89 0392706 R02210.5
10.60 0.4173 43 89 0566848 R02210.6
d1
Øh7
Inch
d1
Øh7
mm
d1
dec.
Inch l2
mm l1
mm
Dormer
Stock
No.
EDP #
or
e-Code
10.70 0.4213 47 95 0566855 R02210.7
27/64 10.72 0.4220 47 95 0422953 R02227/64
10.80 0.4252 47 95 0566862 R02210.8
10.90 0.4291 47 95 0566879 R02210.9
11.00 0.4331 47 95 0392713 R02211.0
11.10 0.4370 47 95 0566886 R02211.1
7/16 11.11 0.4374 47 95 0422670 R0227/16
11.20 0.4409 47 95 0566893 R02211.2
11.30 0.4449 47 95 0566909 R02211.3
11.40 0.4488 47 95 0566916 R02211.4
11.50 0.4528 47 95 0392720 R02211.5
29/64 11.51 0.4531 47 95 0422960 R02229/64
11.60 0.4567 47 95 0566923 R02211.6
11.70 0.4606 47 95 0566930 R02211.7
11.80 0.4646 47 95 0566947 R02211.8
11.90 0.4685 51 102 0566954 R02211.9
15/32 11.91 0.4689 51 102 0422618 R02215/32
12.00 0.4724 51 102 0392737 R02212.0
31/64 12.30 0.4843 51 102 0422977 R02231/64
1/2 12.70 0.5000 51 102 0422571 R0221/2
33/64 13.10 0.5157 54 107 0422984 R02233/64
17/32 13.49 0.5311 54 107 0422625 R02217/32
R002
Ŷ
Ɣ
d1
Øh7
Inch
d1
Øh7
mm
d1
dec.
Inch l2
mm l1
mm
Dormer
Stock
No.
EDP #
or
e-Code
3.00 0.1181 21 61 0381502 R0023.0
3.10 0.1220 23 65 0381519 R0023.1
1/8 3.18 0.1250 23 65 0393468 R0021/8
3.20 0.1260 23 65 0381526 R0023.2
30 3.27 0.1285 23 65 0395738 R002N30
3.30 0.1299 23 65 0381533 R0023.3
3.40 0.1339 26 70 0381540 R0023.4
29 3.45 0.1360 26 70 0395745 R002N29
3.50 0.1378 26 70 0381557 R0023.5
3.60 0.1417 26 70 0381564 R0023.6
3.70 0.1457 26 70 0381571 R0023.7
25 3.80 0.1495 30 75 0395752 R002N25
3.80 0.1496 30 75 0381588 R0023.8
24 3.86 0.1520 30 75 0395769 R002N24
3.90 0.1535 30 75 0381595 R0023.9
5/32 3.97 0.1563 30 75 0393543 R0025/32
d1
Øh7
Inch
d1
Øh7
mm
d1
dec.
Inch l2
mm l1
mm
Dormer
Stock
No.
EDP #
or
e-Code
4.00 0.1575 30 75 0381601 R0024.0
21 4.04 0.1590 30 75 0395776 R002N21
20 4.09 0.1610 30 75 0395783 R002N20
4.10 0.1614 30 75 0381618 R0024.1
4.20 0.1654 30 75 0381625 R0024.2
4.30 0.1693 33 80 0381632 R0024.3
17 4.40 0.1730 33 80 0395790 R002N17
4.40 0.1732 33 80 0381649 R0024.4
16 4.50 0.1770 33 80 0395806 R002N16
4.50 0.1772 33 80 0381656 R0024.5
4.60 0.1811 33 80 0381663 R0024.6
14 4.62 0.1820 33 80 0395813 R002N14
4.70 0.1850 33 80 0381670 R0024.7
3/16 4.76 0.1875 37 86 0393512 R0023/16
4.80 0.1890 37 86 0381687 R0024.8
4.90 0.1929 37 86 0381694 R0024.9
Ɣ Foret extra-court
Ɣ Foret court
ƔStandard length ƔBroca , serie corta
ƔShort length ƔBroca extra corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 17
www.precisiondormer.com
R002
7.70 0.3031 60 117 0381977 R0027.7
7.80 0.3071 60 117 0381984 R0027.8
7.90 0.3110 60 117 0381991 R0027.9
5/16 7.94 0.3125 60 117 0393536 R0025/16
8.00 0.3150 60 117 0382004 R0028.0
8.10 0.3189 60 117 0382011 R0028.1
8.20 0.3228 60 117 0382028 R0028.2
8.30 0.3268 60 117 0382035 R0028.3
8.40 0.3307 60 117 0382042 R0028.4
Q8.43 0.3320 60 117 0395929 R002Q
8.50 0.3346 60 117 0382059 R0028.5
8.60 0.3386 67 125 0382066 R0028.6
R8.61 0.3390 67 125 0395936 R002R
8.70 0.3425 67 125 0382073 R0028.7
11/32 8.73 0.3437 67 125 0393475 R00211/32
8.80 0.3465 67 125 0382080 R0028.8
8.90 0.3504 67 125 0382097 R0028.9
9.00 0.3543 67 125 0382103 R0029.0
T9.09 0.3580 67 125 0395943 R002T
9.10 0.3583 67 125 0382110 R0029.1
9.20 0.3622 67 125 0382127 R0029.2
9.30 0.3661 67 125 0382134 R0029.3
U9.35 0.3680 67 125 0395950 R002U
9.40 0.3701 67 125 0382141 R0029.4
9.50 0.3740 67 125 0382158 R0029.5
3/8 9.53 0.3750 70 133 0393529 R0023/8
9.60 0.3780 70 133 0382165 R0029.6
9.70 0.3819 70 133 0382172 R0029.7
9.80 0.3858 70 133 0382189 R0029.8
9.90 0.3898 70 133 0382196 R0029.9
25/64 9.92 0.3906 70 133 0395967 R00225/64
10.00 0.3937 70 133 0381427 R00210.0
10.10 0.3976 74 133 0566497 R00210.1
10.20 0.4016 74 133 0381434 R00210.2
Y10.26 0.4040 74 133 0395974 R002Y
10.30 0.4055 74 133 0566503 R00210.3
13/32 10.32 0.4063 74 133 0393482 R00213/32
10.40 0.4094 74 133 0566510 R00210.4
10.50 0.4134 74 133 0381441 R00210.5
10.60 0.4173 74 133 0566527 R00210.6
10.70 0.4213 83 142 0566534 R00210.7
27/64 10.72 0.4219 83 142 0395981 R00227/64
10.80 0.4252 83 142 0566541 R00210.8
10.90 0.4291 83 142 0566558 R00210.9
11.00 0.4331 83 142 0381458 R00211.0
11.10 0.4370 83 142 0566565 R00211.1
7/16 11.11 0.4375 83 142 0393550 R0027/16
11.20 0.4409 83 142 0566572 R00211.2
11.30 0.4449 83 142 0566589 R00211.3
11.40 0.4488 83 142 0566596 R00211.4
11.50 0.4528 83 142 0381465 R00211.5
29/64 11.51 0.4531 83 142 0395998 R00229/64
11.60 0.4567 83 142 0566602 R00211.6
11.70 0.4606 83 142 0566619 R00211.7
11.80 0.4646 83 142 0566626 R00211.8
11.90 0.4685 93 151 0566633 R00211.9
15/32 11.91 0.4687 93 151 0393499 R00215/32
12.00 0.4724 93 151 0381472 R00212.0
12.10 0.4764 93 151 0566640 R00212.1
12.20 0.4803 93 151 0566657 R00212.2
12.30 0.4843 93 151 0566664 R00212.3
31/64 12.30 0.4844 93 151 0396001 R00231/64
12.40 0.4882 93 151 0566671 R00212.4
12.50 0.4921 93 151 0566985 R00212.5
12.60 0.4961 93 151 0566688 R00212.6
1/2 12.70 0.5000 93 151 0393444 R0021/2
12.70 0.5000 93 151 0566695 R00212.7
12.80 0.5039 93 151 0566701 R00212.8
12.90 0.5079 93 151 0566718 R00212.9
13.00 0.5118 93 151 0381489 R00213.0
33/64 13.10 0.5156 93 151 0396018 R00233/64
13.10 0.5157 93 151 0566725 R00213.1
13.20 0.5197 93 151 0566732 R00213.2
13.30 0.5236 98 160 0566749 R00213.3
13.40 0.5276 98 160 0566756 R00213.4
d1
Øh7
Inch
d1
Øh7
mm
d1
dec.
Inch l2
mm l1
mm
Dormer
Stock
No.
EDP #
or
e-Code
10 4.92 0.1935 37 86 0395820 R002N10
94.98 0.1960 37 86 0395837 R002N9
5.00 0.1969 37 86 0381700 R0025.0
85.06 0.1990 37 86 0395844 R002N8
5.10 0.2008 37 86 0381717 R0025.1
75.11 0.2010 37 86 0395851 R002N7
5.20 0.2047 37 86 0381724 R0025.2
5.30 0.2087 37 86 0381731 R0025.3
5.40 0.2126 42 93 0381748 R0025.4
35.41 0.2130 42 93 0395868 R002N3
5.50 0.2165 42 93 0381755 R0025.5
7/32 5.56 0.2187 42 93 0393567 R0027/32
5.60 0.2205 42 93 0381762 R0025.6
5.70 0.2244 42 93 0381779 R0025.7
15.79 0.2280 42 93 0395875 R002N1
5.80 0.2283 42 93 0381786 R0025.8
5.90 0.2323 42 93 0381793 R0025.9
6.00 0.2362 42 93 0381809 R0026.0
6.10 0.2402 47 101 0381816 R0026.1
6.20 0.2441 47 101 0381823 R0026.2
D6.23 0.2460 47 101 0395882 R002D
6.30 0.2480 47 101 0381830 R0026.3
1/4 6.35 0.2500 47 101 0393451 R0021/4
6.40 0.2520 47 101 0381847 R0026.4
6.50 0.2559 47 101 0381854 R0026.5
F6.53 0.2570 47 101 0395899 R002F
6.60 0.2598 47 101 0381861 R0026.6
6.70 0.2638 47 101 0381878 R0026.7
6.80 0.2677 53 109 0381885 R0026.8
6.90 0.2717 53 109 0381892 R0026.9
I6.91 0.2720 53 109 0395905 R002I
7.00 0.2756 53 109 0381908 R0027.0
7.10 0.2795 53 109 0381915 R0027.1
9/32 7.15 0.2813 53 109 0393574 R0029/32
7.20 0.2835 53 109 0381922 R0027.2
7.30 0.2874 53 109 0381939 R0027.3
7.40 0.2913 53 109 0381946 R0027.4
M7.49 0.2950 53 109 0395912 R002M
7.50 0.2953 53 109 0381953 R0027.5
7.60 0.2992 60 117 0381960 R0027.6
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
18 www.precisiondormer.com
D12F
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
3/64 0.0469 1/2 1.3/8 003355
1/16 0.0625 5/8 1.5/8 003359
5/64 0.0781 11/16 1.11/16 003365
3/32 0.0938 3/4 1.3/4 003372
7/64 0.1094 13/16 1.13/16 003379
1/8 0.1250 7/8 1.7/8 003385
9/64 0.1406 15/16 1.15/16 003389
5/32 0.1562 1“ 2.1/16 003395
11/64 0.1719 1.1/16 2.1/8 003401
3/16 0.1875 1.1/8 2.3/16 003407
13/64 0.2031 1.3/16 2.1/4 003414
7/32 0.2188 1.1/4 2.3/8 003419
15/64 0.2344 1.5/16 2.7/16 003423
1/4 0.2500 1.3/8 2.1/2 003427
17/64 0.2656 1.7/16 2.5/8 003430
9/32 0.2812 1.1/2 2.11/16 003435
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
19/64 0.2969 1.9/16 2.3/4 003438
5/16 0.3125 1.5/8 2.13/16 003440
21/64 0.3281 1.11/16 2.15/16 003443
11/32 0.3438 1.11/16 3“ 003446
23/64 0.3594 1.3/4 3.1/16 003449
3/8 0.3750 1.13/16 3.1/8 003451
25/64 0.3906 1.7/8 3.1/4 003454
13/32 0.4062 1.15/16 3.5/16 003457
27/64 0.4219 2“ 3.3/8 003459
7/16 0.4375 2.1/16 3.7/16 003460
29/64 0.4531 2.1/8 3.9/16 003461
15/32 0.4688 2.1/8 3.5/8 003462
31/64 0.4844 2.3/16 3.11/16 003463
1/2 0.5000 2.1/4 3.3/4 003464
d1
Øh7
Inch
d1
Øh7
mm
d1
dec.
Inch l2
mm l1
mm
Dormer
Stock
No.
EDP #
or
e-Code
17/32 13.49 0.5313 98 160 0393505 R00217/32
13.50 0.5315 98 160 0566763 R00213.5
13.60 0.5354 98 160 0566770 R00213.6
13.70 0.5394 98 160 0566787 R00213.7
d1
Øh7
Inch
d1
Øh7
mm
d1
dec.
Inch l2
mm l1
mm
Dormer
Stock
No.
EDP #
or
e-Code
13.80 0.5433 98 160 0566794 R00213.8
13.90 0.5472 98 160 0566800 R00213.9
14.00 0.5512 98 160 0381496 R00214.0
R002 - D12F
Ɣ Heavy-duty
Ɣ Foret extra-court
ƔShort lengtth ƔBroca extra corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 19
www.precisiondormer.com
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
60 0.0400 1/2 1.1/2 003350
59 0.0410 1/2 1.1/2 003351
58 0.0420 1/2 1.1/2 003352
57 0.0430 1/2 1.1/2 003353
56 0.0465 1/2 1.1/2 003354
55 0.0520 1/2 1.1/2 003356
54 0.0550 1/2 1.1/2 003357
53 0.0595 1/2 1.1/2 003358
52 0.0635 11/16 1.11/16 003360
51 0.0670 11/16 1.11/16 003361
50 0.0700 11/16 1.11/16 003362
49 0.0730 11/16 1.11/16 003363
48 0.0760 11/16 1.11/16 003364
47 0.0785 3/4 1.3/4 003366
46 0.0810 3/4 1.3/4 003367
45 0.0820 3/4 1.3/4 003368
44 0.0860 3/4 1.3/4 003369
43 0.0890 3/4 1.3/4 003370
42 0.0935 3/4 1.3/4 003371
41 0.0960 13/16 1.13/16 003373
40 0.0980 13/16 1.13/16 003374
39 0.0995 13/16 1.13/16 003375
38 0.1015 13/16 1.13/16 003376
37 0.1040 13/16 1.13/16 003377
36 0.1065 13/16 1.13/16 003378
35 0.1100 7/8 1.7/8 003380
34 0.1110 7/8 1.7/8 003381
33 0.1130 7/8 1.7/8 003382
32 0.1160 7/8 1.7/8 003383
31 0.1200 7/8 1.7/8 003384
30 0.1285 15/16 1.15/16 003386
29 0.1360 15/16 1.15/16 003387
28 0.1405 15/16 1.15/16 003388
27 0.1440 1“ 2.1/16 003390
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
26 0.1470 1“ 2.1/16 003391
25 0.1495 1“ 2.1/16 003392
24 0.1520 1“ 2.1/16 003393
23 0.1540 1“ 2.1/16 003394
22 0.1570 1.1/16 2.1/8 003396
21 0.1590 1.1/16 2.1/8 003397
20 0.1610 1.1/16 2.1/8 003398
19 0.1660 1.1/16 2.1/8 003399
18 0.1695 1.1/16 2.1/8 003400
17 0.1730 1.1/8 2.3/16 003402
16 0.1770 1.1/8 2.3/16 003403
15 0.1800 1.1/8 2.3/16 003404
14 0.1820 1.1/8 2.3/16 003405
13 0.1850 1.1/8 2.3/16 003406
12 0.1890 1.3/16 2.1/4 003408
11 0.1910 1.3/16 2.1/4 003409
10 0.1935 1.3/16 2.1/4 003410
90.1960 1.3/16 2.1/4 003411
80.1990 1.3/16 2.1/4 003412
70.2010 1.3/16 2.1/4 003413
60.2040 1.1/4 2.3/8 003415
50.2055 1.1/4 2.3/8 003416
40.2090 1.1/4 2.3/8 003417
30.2130 1.1/4 2.3/8 003418
20.2210 1.5/16 2.7/16 003420
10.2280 1.5/16 2.7/16 003421
D12W
Ɣ Heavy-duty
Ŷ
Ɣ
Ɣ Foret extra-court
ƔShort length ƔBroca extra corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
20 www.precisiondormer.com
D31F
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
3/64 0.0469 1/2 1.1/2 003805
1/16 0.0625 5/8 1.1/2 003809
5/64 0.0781 11/16 1.11/16 003815
3/32 0.0938 3/4 1.3/4 003822
7/64 0.1094 13/16 1.13/16 003829
1/8 0.1250 7/8 1.7/8 003835
9/64 0.1406 15/16 1.15/16 003839
5/32 0.1562 1“ 2.1/16 003845
11/64 0.1719 1.1/16 2.1/8 003851
3/16 0.1875 1.1/8 2.3/16 003857
13/64 0.2031 1.3/16 2.1/4 003864
7/32 0.2188 1.1/4 2.3/8 003869
15/64 0.2344 1.15/16 2.7/16 003873
1/4 0.2500 1.3/8 2.1/2 003877
17/64 0.2656 1.17/16 2.5/8 003880
9/32 0.2812 1.1/2 2.111/16 003885
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
19/64 0.2969 1.9/16 2.3/4 003888
5/16 0.3125 1.5/8 2.13/16 003890
21/64 0.3281 1.11/16 2.15/16 003893
11/32 0.3438 1.11/16 3 003896
23/64 0.3594 1.3/4 3.1/16 003899
3/8 0.3750 1.13/16 3.1/8 003901
25/64 0.3906 1.7/8 3.1/4 003904
13/32 0.4062 1.15/16 3.5/16 003907
27/64 0.4219 2“ 3.3/8 003909
7/16 0.4375 2.1/16 3.7/16 003910
29/64 0.4531 2.1/8 3.9/16 003911
15/32 0.4688 2.1/8 3.5/8 003912
31/64 0.4844 2.13/16 3.11/16 003913
1/2 0.5000 2.1/4 3.3/4 003914
Ɣ Foret extra-court
ƔShort length ƔBroca extra corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 21
www.precisiondormer.com
D31W
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
60 0.0400 1/2 1.1/2 003800
59 0.0410 1/2 1.1/2 003801
58 0.0420 1/2 1.1/2 003802
57 0.0430 1/2 1.1/2 003803
56 0.0465 1/2 1.1/2 003804
55 0.0520 1/2 1.1/2 003806
54 0.0550 1/2 1.1/2 003807
53 0.0595 1/2 1.1/2 003808
52 0.0635 11/16 1.11/16 003810
51 0.0670 11/16 1.11/16 003811
50 0.0700 11/16 1.11/16 003812
49 0.0730 11/16 1.11/16 003813
48 0.0760 11/16 1.11/16 003814
47 0.0785 3/4 1.3/4 003816
46 0.0810 3/4 1.3/4 003817
45 0.0820 3/4 1.3/4 003818
44 0.0860 3/4 1.3/4 003819
43 0.0890 3/4 1.3/4 003820
42 0.0935 3/4 1.3/4 003821
41 0.0960 13/16 1.13/16 003823
40 0.0980 13/16 1.13/16 003824
39 0.0995 13/16 1.13/16 003825
38 0.1015 13/16 1.13/16 003826
37 0.1040 13/16 1.13/16 003827
36 0.1065 13/16 1.13/16 003828
35 0.1100 7/8 1.7/8 003830
34 0.1110 7/8 1.7/8 003831
33 0.1130 7/8 1.7/8 003832
32 0.1160 7/8 1.7/8 003833
31 0.1200 7/8 1.7/8 003834
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
30 0.1285 15/16 1.15/16 003836
29 0.1360 15/16 1.15/16 003837
28 0.1405 15/16 1.15/16 003838
27 0.1440 1“ 2.1/16 003840
26 0.1470 1“ 2.1/16 003841
25 0.1495 1“ 2.1/16 003842
24 0.1520 1“ 2.1/16 003843
23 0.1540 1“ 2.1/16 003844
22 0.1570 1.1/16 2.1/8 003846
21 0.1590 1.1/16 2.1/8 003847
20 0.1610 1.1/16 2.1/8 003848
19 0.1660 1.1/16 2.1/8 003849
18 0.1695 1.1/16 2.1/8 003850
17 0.1730 1.1/8 2.3/16 003852
16 0.1770 1.1/8 2.3/16 003853
15 0.1800 1.1/8 2.3/16 003854
14 0.1820 1.1/8 2.3/16 003855
13 0.1850 1.1/8 2.3/16 003856
12 0.1890 1.3/16 2.1/4 003858
11 0.1910 1.3/16 2.1/4 003859
10 0.1935 1.3/16 2.1/4 003860
90.1960 1.3/16 2.1/4 003861
80.1990 1.3/16 2.1/4 003862
70.2010 1.3/16 2.1/4 003863
60.2040 1.1/4 2.3/8 003865
50.2055 1.1/4 2.3/8 003866
40.2090 1.1/4 2.3/8 003867
30.2130 1.1/4 2.3/8 003868
20.2210 1.15/16 2.7/16 003870
10.2280 1.15/16 2.7/16 003871
Ɣ Foret extra-court
ƔShort length ƔBroca extra corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
22 www.precisiondormer.com
D33F - D33L
D33F
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/32 0.0312 1/2 1.1/4 003501
3/64 0.0469 3/4 1.1/2 003514
1/16 0.0625 3/4 1.1/2 003518
5/64 0.0781 7/8 1.3/4 003524
3/32 0.0938 1“ 2“ 003531
7/64 0.1094 1.1/4 2.1/4 003538
1/8 0.1250 1.1/4 2.1/4 003544
9/64 0.1406 1.3/8 2.1/2 003548
5/32 0.1562 1.3/8 2.1/2 003554
11/64 0.1719 1.5/8 2.3/4 003560
3/16 0.1875 1.5/8 2.3/4 003566
13/64 0.2031 1.3/4 3“ 003573
7/32 0.2188 1.3/4 3“ 003578
15/64 0.2344 2“ 3.1/4 003582
1/4 0.2500 2“ 3.1/4 003586
17/64 0.2656 2.1/8 3.1/2 003589
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
9/32 0.2812 2.1/8 3.1/2 003594
19/64 0.2969 2.3/8 3.3/4 003597
5/16 0.3125 2.3/8 3.3/4 003599
21/64 0.3281 2.1/2 4“ 003602
11/32 0.3438 2.1/2 4“ 003605
23/64 0.3594 2.3/4 4.1/4 003608
3/8 0.3750 2.3/4 4.1/4 003610
25/64 0.3906 2.7/8 4.1/2 003613
13/32 0.4062 2.7/8 4.1/2 003616
27/64 0.4219 2.7/8 4.1/2 003618
7/16 0.4375 2.7/8 4.1/2 003619
29/64 0.4531 3“ 4.3/4 003620
15/32 0.4688 3“ 4.3/4 003621
31/64 0.4844 3“ 4.3/4 003622
1/2 0.5000 3“ 4.3/4 003623
D33L
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
A0.2340 2“ 3.1/4 003581
B0.2380 2“ 3.1/4 003583
C0.2420 2“ 3.1/4 003584
D0.2460 2“ 3.1/4 003585
F0.2570 2“ 3.1/4 003587
G0.2610 2.1/8 3.1/2 003588
H0.2660 2.1/8 3.1/2 003590
I0.2720 2.1/8 3.1/2 003591
J0.2770 2.1/8 3.1/2 003592
K0.2810 2.1/8 3.1/2 003593
L0.2900 2.1/8 3.1/2 003595
M0.2950 2.3/8 3.3/4 003596
N0.3020 2.3/8 3.3/4 003598
O0.3160 2.3/8 3.3/4 003600
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
P0.3230 2.3/8 3.3/4 003601
Q0.3320 2.1/2 4“ 003603
R0.3390 2.1/2 4“ 003604
S0.3480 2.1/2 4“ 003606
T0.3580 2.1/2 4 003607
U0.3680 2.3/4 4.1/4 003609
V0.3770 2.3/4 4.1/4 003611
W0.3860 2.7/8 4.1/2 003612
X0.3970 2.7/8 4.1/2 003614
Y0.4040 2.7/8 4.1/2 003615
Z0.4130 2.7/8 4.1/2 003617
Ɣ Foret extra-court
ƔStandard length ƔBroca extra corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 23
www.precisiondormer.com
D33W
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
68 0.0310 1/2 1.1/4 003500
67 0.0320 1/2 1.1/4 003502
66 0.0330 1/2 1.1/4 003503
65 0.0350 5/8 1.3/8 003504
64 0.0360 5/8 1.3/8 003505
63 0.0370 5/8 1.3/8 003506
62 0.0380 5/8 1.3/8 003507
61 0.0390 5/8 1.3/8 003508
60 0.0400 3/4 1.1/2 003509
59 0.0410 3/4 1.1/2 003510
58 0.0420 3/4 1.1/2 003511
57 0.0430 3/4 1.1/2 003512
56 0.0465 3/4 1.1/2 003513
55 0.0520 3/4 1.1/2 003515
54 0.0550 3/4 1.1/2 003516
53 0.0595 3/4 1.1/2 003517
52 0.0635 3/4 1.1/2 003519
51 0.0670 3/4 1.1/2 003520
50 0.0700 7/8 1.3/4 003521
49 0.0730 7/8 1.3/4 003522
48 0.0760 7/8 1.3/4 003523
47 0.0785 7/8 1.3/4 003525
46 0.0810 7/8 1.3/4 003526
45 0.0820 7/8 1.3/4 003527
44 0.0860 1“ 2“ 003528
43 0.0890 1“ 2“ 003529
42 0.0935 1“ 2“ 003530
41 0.0960 1“ 2“ 003532
40 0.0980 1“ 2“ 003533
39 0.0995 1.1/4 2.1/4 003534
38 0.1015 1.1/4 2.1/4 003535
37 0.1040 1.1/4 2.1/4 003536
36 0.1065 1.1/4 2.1/4 003537
35 0.1100 1.1/4 2.1/4 003539
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
34 0.1110 1.1/4 2.1/4 003540
33 0.1130 1.1/4 2.1/4 003541
32 0.1160 1.1/4 2.1/4 003542
31 0.1200 1.1/4 2.1/4 003543
30 0.1285 1.1/4 2.1/4 003545
29 0.1360 1.3/8 2.1/2 003546
28 0.1405 1.3/8 2.1/2 003547
27 0.1440 1.3/8 2.1/2 003549
26 0.1470 1.3/8 2.1/2 003550
25 0.1495 1.3/8 2.1/2 003551
24 0.1520 1.3/8 2.1/2 003552
23 0.1540 1.3/8 2.1/2 003553
22 0.1570 1.3/8 2.1/2 003555
21 0.1590 1.3/8 2.1/2 003556
20 0.1610 1.3/8 2.1/2 003557
19 0.1660 1.5/8 2.3/4 003558
18 0.1695 1.5/8 2.3/4 003559
17 0.1730 1.5/8 2.3/4 003561
16 0.1770 1.5/8 2.3/4 003562
15 0.1800 1.5/8 2.3/4 003563
14 0.1820 1.5/8 2.3/4 003564
13 0.1850 1.5/8 2.3/4 003565
12 0.1890 1.5/8 2.3/4 003567
11 0.1910 1.5/8 2.3/4 003568
10 0.1935 1.5/8 2.3/4 003569
90.1960 1.3/4 3“ 003570
80.1990 1.3/4 3“ 003571
70.2010 1.3/4 3“ 003572
60.2040 1.3/4 3“ 003574
50.2055 1.3/4 3“ 003575
40.2090 1.3/4 3“ 003576
30.2130 1.3/4 3“ 003577
20.2210 1.3/4 3“ 003579
10.2280 1.3/4 3“ 003580
Ɣ Foret extra-court
ƔStandard length ƔBroca extra corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
24 www.precisiondormer.com
D33M - D21
D33M
Ŷ
Ɣ
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
0.80 0.0315 10 30 003470
0.90 0.0354 13 32 003471
1.00 0.0394 12 34 003472
1.50 0.0591 18 40 003473
2.00 0.0787 24 49 003474
2.05 0.0807 24 49 003475
2.50 0.0984 30 57 003476
3.00 0.1181 33 61 003477
3.30 0.1299 36 65 003624
3.50 0.1378 39 70 003478
4.00 0.1575 43 75 003626
4.50 0.1772 47 80 003479
5.00 0.1969 52 86 003630
5.50 0.2165 57 93 003480
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
6.00 0.2362 57 93 003481
6.50 0.2559 63 101 003482
7.00 0.2756 69 109 003483
7.50 0.2953 69 109 003484
8.00 0.3150 75 117 003485
8.50 0.3346 75 117 003486
9.00 0.3543 81 125 003487
9.50 0.3740 81 125 003488
10.00 0.3937 87 133 003631
10.50 0.4134 87 133 003489
10.75 0.4232 94 142 003490
11.00 0.4331 94 142 003491
11.50 0.4528 94 142 003492
12.00 0.4724 101 151 003493
D21
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/32 0.0312 3/16 1.1/2 003200
1/16 0.0625 5/16 1.1/2 003201
3/32 0.0938 3/8 1.1/2 003202
1/8 0.1250 7/16 1.1/2 003203
5/32 0.1562 15/32 2“ 003204
3/16 0.1875 9/16 2“ 003205
7/32 0.2188 19/32 2“ 003206
1/4 0.2500 11/16 2“ 003207
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
9/32 0.2812 3/4 2.1/2 003208
5/16 0.3125 7/8 2.1/2 003209
3/8 0.3750 1“ 2.1/2 003211
7/16 0.4375 1.1/16 2.1/2 003213
1/2 0.5000 1.1/8 2.1/2 003215
D21
Ɣ Foret extra-court
ƔSpade drill ƔBroca “spade”
Ɣ Foret extra-court
ƔStandard length ƔBroca extra corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 25
www.precisiondormer.com
Ɣ Foret à centrer
DS-90 - DC
Ŷ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/8 0.1250 9/16 1.1/2 003332
3/16 0.1875 3/4 2“ 003334
1/4 0.2500 1“ 2.1/2 003336
5/16 0.3125 1“ 2.1/2 003338
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
3/8 0.3750 1“ 2.1/2 003340
1/2 0.5000 1.1/4 3“ 003342
DC
Ŷ
Ɣ
Nr. d1
Inch l2
Inch l1
Inch
d2
Ø
Inch
EDP #
or
e-Code
01/32 0.038 1.1/4 1/8 003251
41/8 1/8 2.1/8 5/16 003255
53/16 3/16 2.3/4 7/16 003256
13/64 3/64 1.1/4 1/8 003252
Nr. d1
Inch l2
Inch l1
Inch
d2
Ø
Inch
EDP #
or
e-Code
25/64 5/64 1.7/8 3/16 003253
67/32 7/32 3“ 1/2 003257
37/64 7/64 2“ 1/4 003254
ƔSpotting Drill Ɣ Forets de dessoudage ƔBroca para centrados
ƔCenter Drill ƔBrocas de Centrar
ProdType
Icon1
Photo
Icon2
Icon3
Icon4
Icon5
Icon6
Icon7
Icon8
Icon9
Icon10
Icon11
RangeDim
LaunchLo-
goDate
Cata-
1.1 M11
1.2 M12
1.3 M13
1.4 M14
1.5 M15
1.6 M16
1.7 M17
1.8 M18
2.1 M21
2.2 M22
2.3 M23
2.4 M24
3.1 M31
3.2 M32
3.3 M33
3.4 M34
4.1 M41
4.2 M42
4.3 M43
5.1 M51
5.2 M52
5.3 M53
6.1 M61
6.2 M62
6.3 M63
6.4 M64
7.1 M71
7.2 M72
7.3 M73
7.4 M74
8.1 M81
8.2 M82
8.3 M83
9.1 M91
10.1 M101
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
www.precisiondormer.com
HSS Stub Drills
HSS Stub Drills
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Depth of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 279 U
279 = SFM
U = Alpha Code to find your Feed Rate
To calculate Cutting Feed Rate, refer to chart on pages 9-10.
Page # for easy reference
Ɣ = Good for Application
Ŷ = Excellent for Application
7
Style:
Tool Material:
Finish/Coating:
Standard:
Direction of Cut:
Depth of Cut:
Tool Length:
Helix:
Shank:
Point Angle:
Point Style:
26
1
1
2
2
3
3
1
1
2
2
3
3
4
4
Special Standard:
A520 A597 A927
28-29 30 31-32
Ŷ187M Ɣ184M Ɣ121J
Ŷ154M Ɣ157M Ɣ102J
Ŷ131K Ŷ131L Ŷ85I
Ŷ105I Ŷ131L Ŷ82I
Ŷ69G Ŷ115G Ŷ69E
Ɣ36E Ŷ98G Ŷ62E
Ŷ98I Ɣ56F Ɣ49F
Ŷ52I Ŷ30F Ŷ23F
Ŷ66G Ɣ36D Ɣ30D
Ŷ157M Ŷ184I Ɣ112G
Ŷ121K Ŷ157I Ɣ98G
Ŷ98J Ŷ115G Ɣ75E
Ŷ85F Ŷ89G Ɣ56F
Ŷ112I Ɣ157I Ŷ98G
Ŷ66G Ɣ95I Ŷ59G
Ɣ13B Ɣ52E Ŷ33C
Ɣ56I Ɣ79L Ŷ49I
Ɣ36G Ɣ46I Ŷ30G
Ɣ23E Ɣ33G Ŷ20E
Ɣ131E Ɣ213H
Ŷ164I Ɣ230H
Ŷ148K Ɣ194I Ɣ115G
Ɣ66F Ɣ164I Ɣ102G
Ɣ180I Ɣ230E
Ŷ164M Ŷ148N
Ŷ121K Ɣ131N
Ŷ115I Ŷ157I Ɣ98G
Ɣ213G Ɣ180J
Ŷ164G Ɣ131H
Ŷ115F
PFXADX PFX
Surface Feet per Minute (SFM)
HSS Stub Drills
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
www.precisiondormer.com
HSS Stub Drills
HSS Stub Drills (con‘t)
27
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
A720 A022 QC41CO QC41G QC41 QC41P M40CO
M41CO
M42CO 4ASMCO EZ40G
EZ41G EZ40P
EZ41P
R40C
R41C
R42C 4ASM R40
R41
R42 L40
33 34-35 36 37 38 39 40-41 42 43, 45 44, 45 46-48 49 50-52 53
Ŷ115A Ŷ115K Ɣ115J Ŷ115F Ŷ98F Ŷ98F Ɣ125K Ɣ125K Ŷ115F Ŷ98F Ŷ115J Ŷ115J Ŷ115J Ŷ115J
Ŷ98A Ŷ105K Ɣ98H Ŷ69F Ŷ59F Ŷ59F Ɣ108H Ɣ108H Ŷ69F Ŷ59F Ŷ98J Ŷ98J Ŷ98J Ŷ98J
Ŷ89A Ŷ82I Ɣ89G Ŷ75H Ŷ69H Ŷ66H Ɣ98G Ɣ98G Ŷ75H Ŷ66H Ŷ89G Ŷ89G Ŷ89G Ŷ89G
Ŷ75A Ŷ75H Ɣ79F Ŷ69F Ŷ59F Ŷ59F Ɣ89G Ɣ89G Ŷ69F Ŷ59F Ŷ69G Ŷ69G Ŷ69G Ŷ69G
Ɣ56A Ŷ52G Ŷ56E Ɣ56D Ɣ46D Ɣ46D Ŷ59F Ŷ59F Ɣ56D Ɣ46D Ɣ46F Ɣ46F Ɣ46F Ɣ46F
Ɣ33A Ɣ33E Ŷ33D Ŷ36E Ŷ36E Ɣ33E Ɣ33E Ɣ33E Ɣ33E
Ɣ72A Ŷ49G Ɣ72E Ɣ105H Ɣ89H Ɣ89H Ŷ72F Ŷ72F Ɣ105H Ɣ89H Ŷ52F Ŷ52F Ŷ52F Ŷ52F
Ɣ33A Ɣ26I Ɣ36G Ɣ59F Ɣ49F Ɣ49F Ŷ36H Ŷ36H Ɣ59F Ɣ46F Ɣ30H Ɣ30H Ɣ30H Ɣ30H
Ɣ49A Ɣ30E Ɣ49C Ɣ59D Ɣ49D Ɣ49D Ŷ49D Ŷ49D Ɣ59D Ɣ49D Ɣ33D Ɣ33D Ɣ33D Ɣ33D
Ŷ98A Ŷ105K Ɣ115H Ŷ171H Ŷ151H Ŷ151H Ɣ112K Ɣ112K Ŷ171H Ŷ151H Ŷ105J Ŷ105J Ŷ105J Ŷ105J
Ŷ79A Ŷ82I Ɣ92D Ŷ89H Ŷ79H Ŷ79H Ɣ98F Ɣ98F Ŷ89H Ŷ79H Ŷ89G Ŷ89G Ŷ89G Ŷ89G
Ɣ66A Ŷ66G Ɣ72E Ɣ95F Ɣ85C Ɣ79F Ɣ72F Ɣ72F Ɣ95F Ɣ79F Ŷ66F Ŷ66F Ŷ66F Ŷ66F
Ɣ46A Ɣ52G Ŷ56E Ɣ59D Ŷ56F Ŷ56F Ɣ59D Ɣ52F Ɣ52F Ɣ52F Ɣ52F
Ɣ75A Ŷ82I Ŷ92F Ɣ95H Ɣ89H Ŷ98G Ŷ98G Ɣ89H Ŷ89G Ŷ89G Ŷ89G Ŷ89G
Ɣ56A Ɣ46F Ŷ66D Ɣ49F Ɣ49F Ŷ59F Ŷ59F Ɣ49F Ɣ52E Ɣ52E Ɣ52E Ɣ52E
Ɣ26A Ɣ26C Ŷ36C Ŷ33C Ŷ33C Ɣ26C Ɣ26C Ɣ26C Ɣ26C
Ɣ33A Ɣ43H Ɣ49G Ɣ59H Ɣ49F Ɣ49F Ŷ49H Ŷ49H Ɣ59H Ɣ49F Ɣ43H Ɣ43H Ɣ43H Ɣ43H
Ɣ23A Ɣ26F Ŷ23E Ŷ30F Ŷ30F Ɣ26F Ɣ26F Ɣ26F Ɣ26F
Ɣ13A Ɣ13B Ɣ20B Ŷ20C Ŷ20C Ɣ13B Ɣ13B Ɣ13B Ɣ13B
Ɣ115A Ɣ118H Ɣ125H Ŷ98I Ɣ89I Ɣ125I Ɣ125I Ŷ98I Ŷ89I Ɣ118H Ɣ118H Ɣ118H Ɣ118H
Ɣ131A Ɣ125K Ɣ131F Ŷ89H Ɣ79H Ɣ131K Ɣ131K Ŷ89H Ŷ85H Ɣ125J Ɣ125J Ɣ125J Ɣ125J
Ɣ115A Ɣ89I Ɣ84H Ŷ89H Ɣ79H Ɣ89J Ɣ89J Ŷ89H Ŷ79H Ɣ89I Ɣ89I Ɣ89I Ɣ89I
Ɣ89A Ɣ52I Ɣ69F Ɣ52I Ɣ52I Ɣ52H Ɣ52H Ɣ52H Ɣ52H
Ɣ115A Ŷ131F Ɣ108J Ɣ351H Ɣ115K Ɣ115K Ŷ400H Ŷ351H Ɣ108K Ɣ108K Ɣ108K Ɣ108K
Ɣ98A Ŷ105K Ɣ98I Ɣ325H Ɣ108J Ɣ108J Ŷ351H Ŷ325H Ɣ98J Ɣ98J Ɣ98J Ɣ98J
Ɣ89A Ŷ105J Ɣ98H Ɣ102I Ɣ102I Ɣ98I Ɣ98I Ɣ98I Ɣ98I
Ɣ89A Ɣ82J Ɣ89F Ɣ276H Ɣ98G Ɣ98G Ŷ315H Ŷ276H Ɣ82I Ɣ82I Ɣ82I Ɣ82I
Ɣ157A Ɣ98K Ɣ115M Ɣ115M Ɣ98K Ɣ98K Ɣ98K Ɣ98K
Ɣ82A Ɣ115I Ɣ92K Ɣ92K Ɣ115I Ɣ115I Ɣ115I Ɣ115I
Ɣ56G Ɣ56I Ɣ56I Ɣ56G Ɣ56G Ɣ56G Ɣ56G
Ɣ13C Ɣ20C Ŷ20C Ŷ20C Ɣ13C Ɣ13C Ɣ13C Ɣ13C
Surface Feet per Minute (SFM)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
28 www.precisiondormer.com
Ɣ Foret extra-court ADX ƔBroca ADX , serie extra corta
A520
Ŷ
Ɣ
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm
1
l
mm Stock #
EDP #
or
e-Code
3.00 0.1181 16 46 0038901 A5203.0
3.10 0.1220 18 49 0038918 A5203.1
1/8 3.18 0.1250 18 49 0171264 A5201/8
3.20 0.1259 18 49 0038925 A5203.2
3.30 0.1299 18 49 0038932 A5203.3
3.40 0.1338 20 52 0038949 A5203.4
3.50 0.1377 20 52 0038956 A5203.5
9/64 3.57 0.1405 20 52 0171271 A5209/64
3.60 0.1417 20 52 0038963 A5203.6
3.70 0.1456 20 52 0038970 A5203.7
3.80 0.1496 22 55 0038987 A5203.8
3.90 0.1535 22 55 0038994 A5203.9
5/32 3.97 0.1562 22 55 0171288 A5205/32
4.00 0.1574 22 55 0039007 A5204.0
4.10 0.1614 22 55 0039014 A5204.1
4.20 0.1653 22 55 0039021 A5204.2
4.30 0.1692 24 58 0039038 A5204.3
11/64 4.37 0.1720 24 58 0171295 A52011/64
4.40 0.1732 24 58 0039045 A5204.4
4.50 0.1771 24 58 0039052 A5204.5
4.60 0.1811 24 58 0039069 A5204.6
4.70 0.1850 24 58 0039076 A5204.7
3/16 4.76 0.1874 26 62 0171301 A5203/16
4.80 0.1889 26 62 0039083 A5204.8
4.90 0.1929 26 62 0039090 A5204.9
5.00 0.1968 26 62 0039106 A5205.0
5.10 0.2007 26 62 0039113 A5205.1
13/64 5.16 0.2031 26 62 0171318 A52013/64
5.20 0.2047 26 62 0039120 A5205.2
5.30 0.2086 26 62 0039137 A5205.3
5.40 0.2125 28 66 0039144 A5205.4
5.50 0.2165 28 66 0039151 A5205.5
7/32 5.56 0.2188 28 66 0171325 A5207/32
5.60 0.2204 28 66 0039168 A5205.6
5.70 0.2244 28 66 0039175 A5205.7
5.80 0.2283 28 66 0039182 A5205.8
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm
1
l
mm Stock #
EDP #
or
e-Code
5.90 0.2322 28 66 0039199 A5205.9
15/64 5.95 0.2342 28 66 0171332 A52015/64
6.00 0.2362 28 66 0039205 A5206.0
6.10 0.2401 31 70 0039212 A5206.1
6.20 0.2440 31 70 0039229 A5206.2
6.30 0.2480 31 70 0039236 A5206.3
1/4 6.35 0.2500 31 70 0171349 A5201/4
6.40 0.2519 31 70 0039243 A5206.4
6.50 0.2559 31 70 0039250 A5206.5
6.60 0.2598 31 70 0039267 A5206.6
6.70 0.2637 31 70 0039274 A5206.7
17/64 6.75 0.2657 34 74 0171356 A52017/64
6.80 0.2677 34 74 0039281 A5206.8
6.90 0.2716 34 74 0039298 A5206.9
7.00 0.2755 34 74 0039304 A5207.0
7.10 0.2795 34 74 0039311 A5207.1
9/32 7.14 0.2811 34 74 0171363 A5209/32
7.20 0.2834 34 74 0039328 A5207.2
7.30 0.2874 34 74 0039335 A5207.3
7.40 0.2913 34 74 0039342 A5207.4
7.50 0.2952 34 74 0039359 A5207.5
19/64 7.54 0.2968 37 79 0171370 A52019/64
7.60 0.2992 37 79 0039366 A5207.6
7.70 0.3031 37 79 0039373 A5207.7
7.80 0.3070 37 79 0039380 A5207.8
7.90 0.3110 37 79 0039397 A5207.9
5/16 7.94 0.3125 37 79 0171387 A5205/16
8.00 0.3149 37 79 0039403 A5208.0
8.10 0.3188 37 79 0039410 A5208.1
8.20 0.3228 37 79 0039427 A5208.2
8.30 0.3267 37 79 0039434 A5208.3
21/64 8.33 0.3279 37 79 0171394 A52021/64
8.40 0.3307 37 79 0039441 A5208.4
8.50 0.3346 37 79 0039458 A5208.5
8.60 0.3385 40 84 0039465 A5208.6
8.70 0.3425 40 84 0039472 A5208.7
Ɣ ADX stub drill
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 29
www.precisiondormer.com
A520
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
11/32 8.73 0.3437 40 84 0171400 A52011/32
8.80 0.3464 40 84 0039489 A5208.8
8.90 0.3503 40 84 0039496 A5208.9
9.00 0.3543 40 84 0039502 A5209.0
9.10 0.3582 40 84 0039519 A5209.1
23/64 9.13 0.3594 40 84 0171417 A52023/64
9.20 0.3622 40 84 0039526 A5209.2
9.30 0.3661 40 84 0039533 A5209.3
9.40 0.3700 40 84 0039540 A5209.4
9.50 0.3740 40 84 0039557 A5209.5
3/8 9.53 0.3750 43 89 0171424 A5203/8
9.60 0.3779 43 89 0039564 A5209.6
9.70 0.3818 43 89 0039571 A5209.7
9.80 0.3858 43 89 0039588 A5209.8
9.90 0.3897 43 89 0039595 A5209.9
25/64 9.92 0.3905 43 89 0171431 A52025/64
10.00 0.3937 43 89 0038598 A52010.0
10.10 0.3976 43 89 0038604 A52010.1
10.20 0.4015 43 89 0038611 A52010.2
10.30 0.4055 43 89 0038628 A52010.3
13/32 10.32 0.4062 43 89 0171448 A52013/32
10.40 0.4094 43 89 0038635 A52010.4
10.50 0.4133 43 89 0038642 A52010.5
10.60 0.4173 43 89 0038659 A52010.6
10.70 0.4212 47 95 0038666 A52010.7
27/64 10.72 0.4220 47 95 0171455 A52027/64
10.80 0.4251 47 95 0038673 A52010.8
10.90 0.4291 47 95 0038680 A52010.9
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
11.00 0.4330 47 95 0038697 A52011.0
11.10 0.4370 47 95 0038703 A52011.1
7/16 11.11 0.4374 47 95 0171462 A5207/16
11.20 0.4409 47 95 0038710 A52011.2
11.30 0.4448 47 95 0038727 A52011.3
11.40 0.4488 47 95 0038734 A52011.4
11.50 0.4527 47 95 0038741 A52011.5
29/64 11.51 0.4531 47 95 0171479 A52029/64
11.60 0.4566 47 95 0038758 A52011.6
11.70 0.4606 47 95 0038765 A52011.7
11.80 0.4645 47 95 0038772 A52011.8
11.90 0.4685 51 102 0038789 A52011.9
15/32 11.91 0.4688 51 102 0171486 A52015/32
12.00 0.4724 51 102 0038796 A52012.0
12.10 0.4763 51 102 0038802 A52012.1
12.20 0.4803 51 102 0038819 A52012.2
12.30 0.4842 51 102 0038826 A52012.3
31/64 12.30 0.4842 51 102 0171493 A52031/64
12.40 0.4881 51 102 0038833 A52012.4
12.50 0.4921 51 102 0038840 A52012.5
12.60 0.4960 51 102 0038857 A52012.6
12.70 0.5000 51 102 0038864 A52012.7
1/2 12.70 0.5000 51 102 0171509 A5201/2
12.80 0.5039 51 102 0038871 A52012.8
12.90 0.5078 51 102 0038888 A52012.9
13.00 0.5118 51 102 0038895 A52013.0
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
30 www.precisiondormer.com
d1Øh8
mm d1dec.
Inch l2
mm l1
mm Stock # EDP # or
e-Code
2.50 0.0984 14 43 0125557 A5972.5
2.60 0.1023 14 43 0125564 A5972.6
3.00 0.1181 16 46 0125571 A5973.0
3.10 0.1220 18 49 0587645 A5973.1
3.20 0.1259 18 49 0587652 A5973.2
3.30 0.1299 18 49 0125588 A5973.3
3.40 0.1338 20 52 0125595 A5973.4
3.50 0.1377 20 52 0125601 A5973.5
3.60 0.1417 20 52 0587669 A5973.6
3.70 0.1456 20 52 0587676 A5973.7
3.80 0.1496 22 55 0587683 A5973.8
3.90 0.1535 22 55 0587690 A5973.9
4.00 0.1574 22 55 0125618 A5974.0
4.10 0.1614 22 55 0125625 A5974.1
4.20 0.1653 22 55 0125632 A5974.2
4.30 0.1692 24 58 0125649 A5974.3
4.40 0.1732 24 58 0587706 A5974.4
4.50 0.1771 24 58 0125656 A5974.5
4.60 0.1811 24 58 0587713 A5974.6
4.70 0.1850 24 58 0587720 A5974.7
4.80 0.1889 26 62 0587737 A5974.8
4.90 0.1929 26 62 0125663 A5974.9
5.00 0.1968 26 62 0125670 A5975.0
5.10 0.2007 26 62 0125687 A5975.1
5.20 0.2047 26 62 0587744 A5975.2
5.30 0.2086 26 62 0587751 A5975.3
5.40 0.2125 28 66 0587768 A5975.4
5.50 0.2165 28 66 0125694 A5975.5
5.60 0.2204 28 66 0587775 A5975.6
5.70 0.2244 28 66 0587782 A5975.7
5.80 0.2283 28 66 0587799 A5975.8
5.90 0.2322 28 66 0587805 A5975.9
6.00 0.2362 28 66 0125700 A5976.0
6.10 0.2401 31 70 0587812 A5976.1
6.20 0.2440 31 70 0587829 A5976.2
6.30 0.2480 31 70 0587836 A5976.3
6.40 0.2519 31 70 0587843 A5976.4
6.50 0.2559 31 70 0125717 A5976.5
6.60 0.2598 31 70 0587850 A5976.6
6.70 0.2637 31 70 0587867 A5976.7
6.80 0.2677 34 74 0125724 A5976.8
6.90 0.2716 34 74 0125731 A5976.9
7.00 0.2755 34 74 0125748 A5977.0
7.10 0.2795 34 74 0587874 A5977.1
7.20 0.2834 34 74 0587881 A5977.2
7.30 0.2874 34 74 0587898 A5977.3
10.00 0.3937 43 89 0125465 A59710.0
10.20 0.4015 43 89 0125472 A59710.2
10.30 0.4055 43 89 0125489 A59710.3
10.40 0.4094 43 89 0125496 A59710.4
10.50 0.4133 43 89 0125502 A59710.5
10.80 0.4251 47 95 0587522 A59710.8
11.00 0.4330 50 95 0125519 A59711.0 2)
11.20 0.4409 50 95 0587539 A59711.2 2)
11.50 0.4527 50 95 0125526 A59711.5 2)
11.80 0.4645 50 95 0587546 A59711.8 2)
12.00 0.4724 57 102 0125533 A59712.0 2)
12.20 0.4803 57 102 0125540 A59712.2 2)
12.50 0.4921 57 102 0587553 A59712.5 2)
12.80 0.5039 57 102 0587560 A59712.8 2)
13.00 0.5118 57 102 0587577 A59713.0 2)
13.50 0.5314 62 107 0587584 A59713.5 2)
14.00 0.5511 62 107 0587591 A59714.0 2)
14.50 0.5708 62 111 0587607 A59714.5 2)
15.00 0.5905 63 111 0587614 A59715.0 2)
15.50 0.6102 63 115 0587621 A59715.5 2)
16.00 0.6299 67 115 0587638 A59716.0 2)
A597
ŶƔ
d1Øh8
mm d1dec.
Inch l2
mm l1
mm Stock # EDP # or
e-Code
7.40 0.2913 34 74 0587904 A5977.4
7.50 0.2952 34 74 0125755 A5977.5
7.60 0.2992 37 79 0587911 A5977.6
7.70 0.3031 37 79 0587928 A5977.7
7.80 0.3070 37 79 0587935 A5977.8
7.90 0.3110 37 79 0587942 A5977.9
8.00 0.3149 37 79 0125762 A5978.0
8.10 0.3188 37 79 0587959 A5978.1
8.20 0.3228 37 79 0587966 A5978.2
8.30 0.3267 37 79 0587973 A5978.3
8.40 0.3307 37 79 0587980 A5978.4
8.50 0.3346 37 79 0125779 A5978.5
8.60 0.3385 40 84 0125786 A5978.6
8.70 0.3425 40 84 0125793 A5978.7
8.80 0.3464 40 84 0587997 A5978.8
8.90 0.3503 40 84 0588000 A5978.9
9.00 0.3543 40 84 0125809 A5979.0
9.10 0.3582 40 84 0588017 A5979.1
9.20 0.3622 40 84 0588024 A5979.2
9.30 0.3661 40 84 0588031 A5979.3
9.40 0.3700 40 84 0588048 A5979.4
9.50 0.3740 40 84 0125816 A5979.5
9.60 0.3779 43 89 0588055 A5979.6
9.70 0.3818 43 89 0588062 A5979.7
9.80 0.3858 43 89 0588079 A5979.8
9.90 0.3897 43 89 0588086 A5979.9
2) Overall lengths longer than standards
ƔPFX stub drill Ɣ Foret PFX extra-court ƔBroca PFX Extra Corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 31
www.precisiondormer.com
A927
Ŷ
Ɣ
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
1.00 0.0393 6 26 0147382 A9271.0
1.10 0.0433 7 28 0147399 A9271.1
1.20 0.0472 8 30 0147405 A9271.2
1.30 0.0511 8 30 0147412 A9271.3
1.40 0.0551 9 32 0147429 A9271.4
1.50 0.0590 9 32 0147436 A9271.5
1/16 1.59 0.0625 10 34 0174357 A9271/16
1.60 0.0629 10 34 0147443 A9271.6
1.70 0.0669 10 34 0147450 A9271.7
1.80 0.0708 11 36 0147467 A9271.8
1.90 0.0748 11 36 0147474 A9271.9
5/64 1.98 0.0779 12 38 0174364 A9275/64
2.00 0.0787 12 38 0147481 A9272.0
2.10 0.0826 12 38 0147498 A9272.1
2.20 0.0866 13 40 0147504 A9272.2
2.30 0.0905 13 40 0147511 A9272.3
3/32 2.38 0.0937 14 43 0174371 A9273/32
2.40 0.0944 14 43 0147528 A9272.4
2.50 0.0984 14 43 0147535 A9272.5
2.60 0.1023 14 43 0147542 A9272.6
2.70 0.1062 16 46 0147559 A9272.7
7/64 2.78 0.1094 16 46 0174388 A9277/64
2.80 0.1102 16 46 0147566 A9272.8
2.90 0.1141 16 46 0147573 A9272.9
3.00 0.1181 16 46 0147580 A9273.0
3.10 0.1220 18 49 0147597 A9273.1
1/8 3.18 0.1251 18 49 0174395 A9271/8
3.20 0.1259 18 49 0147603 A9273.2
3.30 0.1299 18 49 0147610 A9273.3
3.40 0.1338 20 52 0147627 A9273.4
3.50 0.1377 20 52 0147634 A9273.5
9/64 3.57 0.1405 20 52 0174401 A9279/64
3.60 0.1417 20 52 0147641 A9273.6
3.70 0.1456 20 52 0147658 A9273.7
3.80 0.1496 22 55 0147665 A9273.8
3.90 0.1535 22 55 0147672 A9273.9
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
5/32 3.97 0.1562 22 55 0174418 A9275/32
4.00 0.1574 22 55 0147689 A9274.0
4.10 0.1614 22 55 0147696 A9274.1
4.20 0.1653 22 55 0147702 A9274.2
4.30 0.1692 24 58 0147719 A9274.3
11/64 4.37 0.1720 24 58 0174425 A92711/64
4.40 0.1732 24 58 0147726 A9274.4
4.50 0.1771 24 58 0147733 A9274.5
4.60 0.1811 24 58 0147740 A9274.6
4.70 0.1850 24 58 0147757 A9274.7
3/16 4.76 0.1874 26 62 0174432 A9273/16
4.80 0.1889 26 62 0147764 A9274.8
4.90 0.1929 26 62 0147771 A9274.9
5.00 0.1968 26 62 0147788 A9275.0
5.10 0.2007 26 62 0147795 A9275.1
13/64 5.16 0.2031 26 62 0174449 A92713/64
5.20 0.2047 26 62 0147801 A9275.2
5.30 0.2086 26 62 0147818 A9275.3
5.40 0.2125 28 66 0147825 A9275.4
5.50 0.2165 28 66 0147832 A9275.5
7/32 5.56 0.2188 28 66 0174456 A9277/32
5.60 0.2204 28 66 0147849 A9275.6
5.70 0.2244 28 66 0147856 A9275.7
5.80 0.2283 28 66 0147863 A9275.8
5.90 0.2322 28 66 0147870 A9275.9
15/64 5.95 0.2342 28 66 0174463 A92715/64
6.00 0.2362 28 66 0147887 A9276.0
6.10 0.2401 31 70 0147894 A9276.1
6.20 0.2440 31 70 0147900 A9276.2
6.30 0.2480 31 70 0147917 A9276.3
1/4 6.35 0.2500 31 70 0174470 A9271/4
6.40 0.2519 31 70 0147924 A9276.4
6.50 0.2559 31 70 0147931 A9276.5
6.60 0.2598 31 70 0147948 A9276.6
6.70 0.2637 31 70 0147955 A9276.7
17/64 6.75 0.2657 34 74 0174487 A92717/64
ƔPFX stub drill ƔForet PFX extra-court Ɣ Broca PFX Extra Corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
32 www.precisiondormer.com
A927
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
6.80 0.2677 34 74 0147962 A9276.8
6.90 0.2716 34 74 0147979 A9276.9
7.00 0.2755 34 74 0147986 A9277.0
7.10 0.2795 34 74 0147993 A9277.1
9/32 7.14 0.2811 34 74 0174494 A9279/32
7.20 0.2834 34 74 0148006 A9277.2
7.30 0.2874 34 74 0148013 A9277.3
7.40 0.2913 34 74 0148020 A9277.4
7.50 0.2952 34 74 0148037 A9277.5
19/64 7.54 0.2968 37 79 0174500 A92719/64
7.60 0.2992 37 79 0148044 A9277.6
7.70 0.3031 37 79 0148051 A9277.7
7.80 0.3070 37 79 0148068 A9277.8
7.90 0.3110 37 79 0148075 A9277.9
5/16 7.94 0.3125 37 79 0174517 A9275/16
8.00 0.3149 37 79 0148082 A9278.0
8.10 0.3188 37 79 0148099 A9278.1
8.20 0.3228 37 79 0148105 A9278.2
8.30 0.3267 37 79 0148112 A9278.3
21/64 8.33 0.3279 37 79 0174524 A92721/64
8.40 0.3307 37 79 0148129 A9278.4
8.50 0.3346 37 79 0148136 A9278.5
8.60 0.3385 40 84 0148143 A9278.6
8.70 0.3425 40 84 0148150 A9278.7
11/32 8.73 0.3437 40 84 0174531 A92711/32
8.80 0.3464 40 84 0148167 A9278.8
8.90 0.3503 40 84 0148174 A9278.9
9.00 0.3543 40 84 0148181 A9279.0
9.10 0.3582 40 84 0148198 A9279.1
23/64 9.13 0.3594 40 84 0174548 A92723/64
9.20 0.3622 40 84 0148204 A9279.2
9.30 0.3661 40 84 0148211 A9279.3
9.40 0.3700 40 84 0148228 A9279.4
9.50 0.3740 40 84 0148235 A9279.5
3/8 9.53 0.3751 43 89 0174555 A9273/8
9.60 0.3779 43 89 0148242 A9279.6
9.70 0.3818 43 89 0148259 A9279.7
9.80 0.3858 43 89 0148266 A9279.8
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
9.90 0.3897 43 89 0148273 A9279.9
25/64 9.92 0.3905 43 89 0174562 A92725/64
10.00 0.3937 43 89 0148280 A92710.0
10.20 0.4015 43 89 0148297 A92710.2
10.30 0.4055 43 89 0148303 A92710.3
13/32 10.32 0.4062 43 89 0174579 A92713/32
10.40 0.4094 43 89 0148310 A92710.4
10.50 0.4133 43 89 0148327 A92710.5
27/64 10.72 0.4220 50 95 0174586 A92727/64 2)
10.80 0.4251 50 95 0148334 A92710.8 2)
11.00 0.4330 50 95 0148341 A92711.0 2)
7/16 11.11 0.4374 50 95 0174593 A9277/16 2)
11.20 0.4409 50 95 0148358 A92711.2 2)
11.50 0.4527 50 95 0148365 A92711.5 2)
29/64 11.51 0.4531 50 95 0174609 A92729/64 2)
11.80 0.4645 50 95 0148372 A92711.8 2)
15/32 11.91 0.4688 57 102 0174616 A92715/32 2)
12.00 0.4724 57 102 0148389 A92712.0 2)
12.20 0.4803 57 102 0148396 A92712.2 2)
31/64 12.30 0.4842 57 102 0174623 A92731/64 2)
12.50 0.4921 57 102 0148402 A92712.5 2)
1/2 12.70 0.5000 57 102 0174630 A9271/2 2)
12.80 0.5039 57 102 0148419 A92712.8 2)
13.00 0.5118 57 102 0148426 A92713.0 2)
13.50 0.5314 62 107 0302804 A92713.5 2)
14.00 0.5511 62 107 0308516 A92714.0 2)
14.50 0.5708 62 107 0302811 A92714.5 2)
15.00 0.5905 63 111 0302828 A92715.0 2)
15.50 0.6102 63 111 0302835 A92715.5 2)
16.00 0.6299 67 115 0302842 A92716.0 2)
17.00 0.6692 71 119 0302859 A92717.0 2)
17.50 0.6889 75 123 0588437 A92717.5 2)
18.00 0.7086 75 123 0302866 A92718.0 2)
19.00 0.7480 79 127 0302873 A92719.0 2)
20.00 0.7874 81 131 0302880 A92720.0 2)
2) Overall lengths longer than standards
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 33
www.precisiondormer.com
A720
Ŷ
Ɣ
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
d2
Øh8
mm Stock #
EDP #
or
e-Code
0.15 0.0059 1.0 25 1 0044988 A720.15
0.16 0.0063 1.4 25 1 0566961 A720.16
0.17 0.0067 1.4 25 1 0612057 A720.17
0.18 0.0070 1.4 25 1 0044995 A720.18
0.20 0.0078 1.8 25 1 0045008 A720.2
0.22 0.0086 1.8 25 1 0045015 A720.22
0.25 0.0098 2.2 25 1 0045022 A720.25
0.27 0.0106 2.2 25 1 0566978 A720.27
0.28 0.0110 2.2 25 1 0045039 A720.28
0.30 0.0118 2.2 25 1 0045046 A720.3
0.35 0.0137 2.8 25 1 0045053 A720.35
0.38 0.0149 2.8 25 1 0045060 A720.38
0.39 0.0154 3.6 25 1 0045077 A720.39
0.40 0.0157 3.6 25 1 0045084 A720.4
0.45 0.0177 3.6 25 1 0045107 A720.45
0.50 0.0196 4.0 25 1 0045114 A720.5
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
d2
Øh8
mm Stock #
EDP #
or
e-Code
0.55 0.0217 4.5 25 1 0612064 A720.55
0.60 0.0236 4.5 25 1 0045121 A720.6
0.62 0.0244 5.0 25 1 0612071 A720.62
0.65 0.0256 5.0 25 1 0612088 A720.65
0.70 0.0276 5.6 25 1 0615577 A720.7
0.75 0.0295 5.6 25 1 0612101 A720.75
0.80 0.0315 6.3 25 1.5 0615584 A720.8
0.85 0.0335 6.3 25 1.5 0612125 A720.85
0.90 0.0354 7.1 25 1.5 0615591 A720.9
0.95 0.0374 7.1 25 1.5 0612149 A720.95
1.00 0.0394 8.0 25 1.5 0615607 A7201.0
1.05 0.0413 8.0 25 1.5 0612163 A7201.05
1.10 0.0433 9.0 25 1.5 0615614 A7201.1
1.20 0.0472 10.0 25 1.5 0615621 A7201.2
1.30 0.0512 10.0 25 1.5 0615638 A7201.3
1.40 0.0551 11.2 25 1.5 0615645 A7201.4
ƔMicro drill Ɣ Micro foret Ɣ Micro Broca
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
34 www.precisiondormer.com
Ɣ Foret extra-court
A022
Ŷ
Ɣ
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
0.50 0.0196 3 20 0600382 A022.5
0.60 0.0236 3.5 21 0600399 A022.6
0.70 0.0275 4.5 23 0600405 A022.7
1/32 0.79 0.0312 13 35 0600542 A0221/32
0.80 0.0314 5 24 0600412 A022.8
0.90 0.0354 5.5 25 0600429 A022.9
1.00 0.0393 6 26 0600436 A0221.0
1.10 0.0433 7 28 0600443 A0221.1
3/64 1.19 0.0468 13 35 0600559 A0223/64
1.20 0.0472 8 30 0600450 A0221.2
1.30 0.0511 8 30 0600467 A0221.3
1.40 0.0551 9 32 0600474 A0221.4
1.50 0.0590 9 32 0600481 A0221.5
1/16 1.59 0.0625 16 41 0600535 A0221/16
1.60 0.0629 10 34 0600498 A0221.6
1.70 0.0669 10 34 0600504 A0221.7
1.80 0.0708 11 36 0600511 A0221.8
1.90 0.0748 11 36 0600528 A0221.9
5/64 1.98 0.0779 17 43 0600566 A0225/64
2.00 0.0787 12 38 0600115 A0222.0
2.10 0.0826 12 38 0600122 A0222.1
2.20 0.0866 13 40 0600139 A0222.2
2.25 0.0885 13 40 0600146 A0222.25
2.30 0.0905 13 40 0600153 A0222.3
3/32 2.38 0.0937 20 45 0600238 A0223/32
2.40 0.0944 14 43 0600160 A0222.4
2.50 0.0984 14 43 0600177 A0222.5
2.60 0.1023 14 43 0600184 A0222.6
2.65 0.1043 14 43 0600191 A0222.65
2.70 0.1062 16 46 0600207 A0222.7
7/64 2.78 0.1094 22 47 0600245 A0227/64
2.80 0.1102 16 46 0600214 A0222.8
2.90 0.1141 16 46 0600221 A0222.9
3.00 0.1181 16 46 0588697 A0223.0
3.10 0.1220 18 49 0589083 A0223.1
1/8 3.18 0.1251 23 49 0588727 A0221/8
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
3.20 0.1259 18 49 0589090 A0223.2
3.25 0.1279 18 49 0589106 A0223.25
3.30 0.1299 18 49 0589113 A0223.3
3.40 0.1338 20 52 0589120 A0223.4
3.50 0.1377 20 52 0589137 A0223.5
9/64 3.57 0.1405 25 50 0589878 A0229/64
3.60 0.1417 20 52 0589144 A0223.6
3.70 0.1456 20 52 0589151 A0223.7
3.80 0.1496 22 55 0589168 A0223.8
3.90 0.1535 22 55 0589175 A0223.9
5/32 3.97 0.1562 26 53 0589410 A0225/32
4.00 0.1574 22 55 0589205 A0224.0
4.10 0.1614 22 55 0589212 A0224.1
4.20 0.1653 22 55 0589229 A0224.2
4.30 0.1692 24 58 0589236 A0224.3
11/64 4.37 0.1720 28 55 0588932 A02211/64
4.40 0.1732 24 58 0589243 A0224.4
4.50 0.1771 24 58 0589250 A0224.5
4.60 0.1811 24 58 0589267 A0224.6
4.70 0.1850 24 58 0589274 A0224.7
3/16 4.76 0.1874 30 57 0589182 A0223/16
4.80 0.1889 26 62 0589281 A0224.8
4.90 0.1929 26 62 0589298 A0224.9
5.00 0.1968 26 62 0589304 A0225.0
5.10 0.2007 26 62 0589311 A0225.1
13/64 5.16 0.2031 31 58 0589014 A02213/64
5.20 0.2047 26 62 0589328 A0225.2
5.30 0.2086 26 62 0589335 A0225.3
5.40 0.2125 28 66 0589342 A0225.4
5.50 0.2165 28 66 0589359 A0225.5
7/32 5.56 0.2188 33 61 0589649 A0227/32
5.60 0.2204 28 66 0589366 A0225.6
5.70 0.2244 28 66 0589373 A0225.7
5.80 0.2283 28 66 0589380 A0225.8
5.90 0.2322 28 66 0589397 A0225.9
15/64 5.95 0.2342 34 63 0589069 A02215/64
ƔStub drill ƔBroca extra corta
Bright below 2.0 mm, TiN Tipped and split point 2.0 mm and above
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 35
www.precisiondormer.com
A022
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
6.00 0.2362 28 66 0589434 A0226.0
6.10 0.2401 31 70 0589441 A0226.1
6.20 0.2440 31 70 0589458 A0226.2
6.30 0.2480 31 70 0589465 A0226.3
1/4 6.35 0.2500 36 65 0588710 A0221/4
6.40 0.2519 31 70 0589472 A0226.4
6.50 0.2559 31 70 0589489 A0226.5
6.60 0.2598 31 70 0589496 A0226.6
6.70 0.2637 31 70 0589502 A0226.7
6.80 0.2677 34 74 0589519 A0226.8
6.90 0.2716 34 74 0589526 A0226.9
7.00 0.2755 34 74 0589533 A0227.0
7.10 0.2795 34 74 0589540 A0227.1
9/32 7.14 0.2811 40 70 0589861 A0229/32
7.20 0.2834 34 74 0589557 A0227.2
7.30 0.2874 34 74 0589564 A0227.3
7.40 0.2913 34 74 0589571 A0227.4
7.50 0.2952 34 74 0589588 A0227.5
7.60 0.2992 37 79 0589595 A0227.6
7.70 0.3031 37 79 0589601 A0227.7
7.80 0.3070 37 79 0589618 A0227.8
7.90 0.3110 37 79 0589625 A0227.9
5/16 7.94 0.3125 43 73 0589403 A0225/16
8.00 0.3149 37 79 0589656 A0228.0
8.10 0.3188 37 79 0589663 A0228.1
8.20 0.3228 37 79 0589670 A0228.2
8.30 0.3267 37 79 0589687 A0228.3
8.40 0.3307 37 79 0589694 A0228.4
8.50 0.3346 37 79 0589700 A0228.5
8.60 0.3385 40 84 0589717 A0228.6
8.70 0.3425 40 84 0589724 A0228.7
11/32 8.73 0.3437 45 78 0588925 A02211/32
8.80 0.3464 40 84 0589731 A0228.8
8.90 0.3503 40 84 0589748 A0228.9
9.00 0.3543 40 84 0589755 A0229.0
9.10 0.3582 40 84 0589762 A0229.1
9.20 0.3622 40 84 0589779 A0229.2
9.30 0.3661 40 84 0589786 A0229.3
9.40 0.3700 40 84 0589793 A0229.4
9.50 0.3740 40 84 0589809 A0229.5
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
3/8 9.53 0.3751 48 81 0589199 A0223/8
9.60 0.3779 43 89 0589816 A0229.6
9.70 0.3818 43 89 0589823 A0229.7
9.80 0.3858 43 89 0589830 A0229.8
9.90 0.3897 43 89 0589847 A0229.9
10.00 0.3937 43 89 0588734 A02210.0
10.10 0.3976 43 89 0588741 A02210.1
10.20 0.4015 43 89 0588758 A02210.2
10.30 0.4055 43 89 0588765 A02210.3
13/32 10.32 0.4062 51 86 0589007 A02213/32
10.40 0.4094 43 89 0588772 A02210.4
10.50 0.4133 43 89 0588789 A02210.5
10.60 0.4173 43 89 0588796 A02210.6
10.70 0.4212 47 95 0588802 A02210.7
10.80 0.4251 47 95 0588819 A02210.8
10.90 0.4291 47 95 0588826 A02210.9
11.00 0.4330 47 95 0588833 A02211.0
11.10 0.4370 47 95 0588840 A02211.1
7/16 11.11 0.4374 54 89 0589632 A0227/16
11.20 0.4409 47 95 0588857 A02211.2
11.30 0.4448 47 95 0588864 A02211.3
11.50 0.4527 47 95 0588871 A02211.5
11.60 0.4566 47 95 0588888 A02211.6
11.70 0.4606 47 95 0588895 A02211.7
11.80 0.4645 47 95 0588901 A02211.8
11.90 0.4685 51 102 0588918 A02211.9
12.00 0.4724 51 102 0588949 A02212.0
12.10 0.4763 51 102 0588956 A02212.1
12.20 0.4803 51 102 0588963 A02212.2
12.50 0.4921 51 102 0588970 A02212.5
1/2 12.70 0.5000 60 98 0588703 A0221/2
13.00 0.5118 51 102 0588987 A02213.0
13.50 0.5314 54 107 0588994 A02213.5
14.00 0.5511 54 107 0589021 A02214.0
9/16 14.29 0.5625 67 105 0589854 A0229/16
14.50 0.5708 56 111 0589038 A02214.5
15.00 0.5905 56 111 0589045 A02215.0
15.50 0.6102 58 115 0589052 A02215.5
5/8 15.88 0.6251 73 111 0589427 A0225/8
16.00 0.6299 58 115 0589076 A02216.0
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
36 www.precisiondormer.com
Ɣ Foret extra-court
QC41CO
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 5/8 1.5/8 060104
5/64 0.0781 11/16 1.11/16 060105
3/32 0.0938 3/4 1.3/4 060106
40 0.0980 13/16 1.13/16 060240
39 0.0995 13/16 1.13/16 060239
38 0.1015 13/16 1.13/16 060238
37 0.1040 13/16 1.13/16 060237
36 0.1065 13/16 1.13/16 060236
7/64 0.1094 13/16 1.13/16 060107
35 0.1100 7/8 1.7/8 060235
34 0.1110 7/8 1.7/8 060234
33 0.1130 7/8 1.7/8 060233
32 0.1160 7/8 1.7/8 060232
31 0.1200 7/8 1.7/8 060231
1/8 0.1250 7/8 1.7/8 060108
30 0.1285 15/16 1.15/16 060230
29 0.1360 15/16 1.15/16 060229
28 0.1405 15/16 1.15/16 060228
9/64 0.1406 15/16 1.15/16 060109
27 0.1440 1“ 2.1/16 060227
26 0.1470 1“ 2.1/16 060226
25 0.1495 1“ 2.1/16 060225
24 0.1520 1“ 2.1/16 060224
23 0.1540 1“ 2.1/16 060223
5/32 0.1562 1“ 2.1/16 060110
22 0.1570 1.1/16 2.1/8 060222
21 0.1590 1.1/16 2.1/8 060221
20 0.1610 1.1/16 2.1/8 060220
19 0.1660 1.1/16 2.1/8 060219
18 0.1695 1.1/16 2.1/8 060218
11/64 0.1719 1.1/16 2.1/8 060111
17 0.1730 1.1/8 2.3/16 060217
16 0.1770 1.1/8 2.3/16 060216
15 0.1800 1.1/8 2.3/16 060215
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
14 0.1820 1.1/8 2.3/16 060214
13 0.1850 1.1/8 2.3/16 060213
3/16 0.1875 1.1/8 2.3/16 060112
12 0.1890 1.3/16 2.1/4 060212
11 0.1910 1.3/16 2.1/4 060211
10 0.1935 1.3/16 2.1/4 060210
90.1960 1.3/16 2.1/4 060209
80.1990 1.3/16 2.1/4 060208
70.2010 1.3/16 2.1/4 060207
13/64 0.2031 1.3/16 2.1/4 060113
60.2040 1.1/4 2.3/8 060206
50.2055 1.1/4 2.3/8 060205
40.2090 1.1/4 2.3/8 060204
30.2130 1.1/4 2.3/8 060203
7/32 0.2188 1.1/4 2.3/8 060114
20.2210 1.5/16 2.7/16 060202
10.2280 1.5/16 2.7/16 060201
15/64 0.2344 1.5/16 2.7/16 060115
1/4 0.2500 1.3/8 2.1/2 060116
17/64 0.2656 1.7/16 2.5/8 060117
9/32 0.2812 1.1/2 2.11/16 060118
19/64 0.2969 1.9/16 2.3/4 060119
5/16 0.3125 1.5/8 2.13/16 060120
21/64 0.3281 1.11/16 2.15/16 060121
11/32 0.3438 1.11/16 3“ 060122
23/64 0.3594 1.3/4 3.1/16 060123
3/8 0.3750 1.13/16 3.1/8 060124
25/64 0.3906 1.7/8 3.1/4 060125
13/32 0.4062 1.15/16 3.5/16 060126
27/64 0.4219 2“ 3.3/8 060127
7/16 0.4375 2.1/16 3.7/16 060128
29/64 0.4531 2.1/8 3.9/16 060129
15/32 0.4688 2.1/8 3.5/8 060130
31/64 0.4844 2.3/16 3.11/16 060131
1/2 0.5000 2.1/4 3.3/4 060132
ƔStub drill Ɣ Broca extra corta
Ɣ Wide-land parabolic fl ute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 37
www.precisiondormer.com
Ɣ Foret extra-court
QC41G
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 5/8 1.5/8 062304
5/64 0.0781 11/16 1.11/16 062305
3/32 0.0938 3/4 1.3/4 062306
40 0.0980 13/16 1.13/16 061440
39 0.0995 13/16 1.13/16 061439
38 0.1015 13/16 1.13/16 061438
37 0.1040 13/16 1.13/16 061437
36 0.1065 13/16 1.13/16 061436
7/64 0.1094 13/16 1.13/16 062307
35 0.1100 7/8 1.7/8 061435
34 0.1110 7/8 1.7/8 061434
33 0.1130 7/8 1.7/8 061433
32 0.1160 7/8 1.7/8 061432
31 0.1200 7/8 1.7/8 061431
1/8 0.1250 7/8 1.7/8 062308
30 0.1285 15/16 1.15/16 061430
29 0.1360 15/16 1.15/16 061429
28 0.1405 15/16 1.15/16 061428
9/64 0.1406 15/16 1.15/16 062309
27 0.1440 1“ 2.1/16 061427
26 0.1470 1“ 2.1/16 061426
25 0.1495 1“ 2.1/16 061425
24 0.1520 1“ 2.1/16 061424
23 0.1540 1“ 2.1/16 061423
5/32 0.1562 1“ 2.1/16 062310
22 0.1570 1.1/16 2.1/8 061422
21 0.1590 1.1/16 2.1/8 061421
20 0.1610 1.1/16 2.1/8 061420
19 0.1660 1.1/16 2.1/8 061419
18 0.1695 1.1/16 2.1/8 061418
11/64 0.1719 1.1/16 2.1/8 062311
17 0.1730 1.1/8 2.3/16 061417
16 0.1770 1.1/8 2.3/16 061416
15 0.1800 1.1/8 2.3/16 061415
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
14 0.1820 1.1/8 2.3/16 061414
13 0.1850 1.1/8 2.3/16 061413
3/16 0.1875 1.1/8 2.3/16 062312
12 0.1890 1.3/16 2.1/4 061412
11 0.1910 1.3/16 2.1/4 061411
10 0.1935 1.3/16 2.1/4 061410
90.1960 1.3/16 2.1/4 061409
80.1990 1.3/16 2.1/4 061408
70.2010 1.3/16 2.1/4 061407
13/64 0.2031 1.3/16 2.1/4 062313
60.2040 1.1/4 2.3/8 061406
50.2055 1.1/4 2.3/8 061405
40.2090 1.1/4 2.3/8 061404
30.2130 1.1/4 2.3/8 061403
7/32 0.2188 1.1/4 2.3/8 062314
20.2210 1.5/16 2.7/16 061402
10.2280 1.5/16 2.7/16 061401
15/64 0.2344 1.5/16 2.7/16 062315
1/4 0.2500 1.3/8 2.1/2 062316
17/64 0.2656 1.7/16 2.5/8 062317
9/32 0.2812 1.1/2 2.11/16 062318
19/64 0.2969 1.9/16 2.3/4 062319
5/16 0.3125 1.5/8 2.13/16 062320
21/64 0.3281 1.11/16 2.15/16 062321
11/32 0.3438 1.11/16 3“ 062322
23/64 0.3594 1.3/4 3.1/16 062323
3/8 0.3750 1.13/16 3.1/8 062324
25/64 0.3906 1.7/8 3.1/4 062325
13/32 0.4062 1.15/16 3.5/16 062326
27/64 0.4219 2“ 3.3/8 062327
7/16 0.4375 2.1/16 3.7/16 062328
29/64 0.4531 2.1/8 3.9/16 062329
15/32 0.4688 2.1/8 3.5/8 062330
31/64 0.4844 2.3/16 3.3/4 062331
1/2 0.5000 2.1/4 3.3/4 062332
ƔStub drill ƔBroca extra corta
ƔWide-land parabolic fl ute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
38 www.precisiondormer.com
Ɣ Foret extra-court
QC41
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 5/8 1.5/8 055704
5/64 0.0781 11/16 1.11/16 055705
3/32 0.0938 3/4 1.3/4 055706
40 0.0980 13/16 1.13/16 056040
39 0.0995 13/16 1.13/16 056039
38 0.1015 13/16 1.13/16 056038
37 0.1040 13/16 1.13/16 056037
36 0.1065 13/16 1.13/16 056036
7/64 0.1094 13/16 1.13/16 055707
35 0.1100 7/8 1.7/8 056035
34 0.1110 7/8 1.7/8 056034
33 0.1130 7/8 1.7/8 056033
32 0.1160 7/8 1.7/8 056032
31 0.1200 7/8 1.7/8 056031
1/8 0.1250 7/8 1.7/8 055708
30 0.1285 15/16 1.15/16 056030
29 0.1360 15/16 1.15/16 056029
28 0.1405 15/16 1.15/16 056028
9/64 0.1406 15/16 1.15/16 055709
27 0.1440 1“ 2.1/16 056027
26 0.1470 1“ 2.1/16 056026
25 0.1495 1“ 2.1/16 056025
24 0.1520 1“ 2.1/16 056024
23 0.1540 1“ 2.1/16 056023
5/32 0.1562 1“ 2.1/16 055710
22 0.1570 1.1/16 2.1/8 056022
21 0.1590 1.1/16 2.1/8 056021
20 0.1610 1.1/16 2.1/8 056020
19 0.1660 1.1/16 2.1/8 056019
18 0.1695 1.1/16 2.1/8 056018
11/64 0.1719 1.1/16 2.1/8 055711
17 0.1730 1.1/8 2.3/16 056017
16 0.1770 1.1/8 2.3/16 056016
15 0.1800 1.1/8 2.3/16 056015
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
14 0.1820 1.1/8 2.3/16 056014
13 0.1850 1.1/8 2.3/16 056013
3/16 0.1875 1.1/8 2.3/16 055712
12 0.1890 1.3/16 2.1/4 056012
11 0.1910 1.3/16 2.1/4 056011
10 0.1935 1.3/16 2.1/4 056010
90.1960 1.3/16 2.1/4 056009
80.1990 1.3/16 2.1/4 056008
70.2010 1.3/16 2.1/4 056007
13/64 0.2031 1.3/16 2.1/4 055713
60.2040 1.1/4 2.3/8 056006
50.2055 1.1/4 2.3/8 056005
40.2090 1.1/4 2.3/8 056004
30.2130 1.1/4 2.3/8 056003
7/32 0.2188 1.1/4 2.3/8 055714
20.2210 1.5/16 2.7/16 056002
10.2280 1.5/16 2.7/16 056001
15/64 0.2344 1.5/16 2.7/16 055715
1/4 0.2500 1.3/8 2.1/2 055716
17/64 0.2656 1.7/16 2.5/8 055717
9/32 0.2812 1.1/2 2.11/16 055718
19/64 0.2969 1.9/16 2.3/4 055719
5/16 0.3125 1.5/8 2.13/16 055720
21/64 0.3281 1.11/16 2.15/16 055721
11/32 0.3438 1.11/16 3“ 055722
23/64 0.3594 1.3/4 3.1/16 055723
3/8 0.3750 1.13/16 3.1/8 055724
25/64 0.3906 1.7/8 3.1/4 055725
13/32 0.4062 1.15/16 3.5/16 055726
27/64 0.4219 2“ 3.3/8 055727
7/16 0.4375 2.1/16 3.7/16 055728
29/64 0.4531 2.1/8 3.9/16 055729
15/32 0.4688 2.1/8 3.5/8 055730
31/64 0.4844 2.3/16 3.3/4 055731
1/2 0.5000 2.1/4 3.3/4 055732
ƔStub drill ƔBroca extra corta
ƔWide-land parabolic fl ute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 39
www.precisiondormer.com
Ɣ Foret extra-court
1/2 0.5000 2.1/4 3.3/4 058332
33/64 0.5156 2.3/8 3.7/8 058333
17/32 0.5312 2.3/8 3.7/8 058334
35/64 0.5469 2.1/2 4“ 058335
9/16 0.5625 2.1/2 4“ 058336
37/64 0.5781 2.5/8 4.1/8 058337
19/32 0.5938 2.5/8 4.1/8 058338
39/64 0.6094 2.3/4 4.1/4 058339
5/8 0.6250 2.3/4 4.1/4 058340
41/64 0.6406 2.7/8 4.1/2 058341
21/32 0.6562 2.7/8 4.1/2 058342
43/64 0.6719 2.7/8 4.5/8 058343
11/16 0.6875 2.7/8 4.5/8 058344
QC41P
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 5/8 1.5/8 058304
5/64 0.0781 11/16 1.11/16 058305
3/32 0.0938 3/4 1.3/4 058306
40 0.0980 13/16 1.13/16 060040
39 0.0995 13/16 1.13/16 060039
38 0.1015 13/16 1.13/16 060038
37 0.1040 13/16 1.13/16 060037
36 0.1065 13/16 1.13/16 060036
7/64 0.1094 13/16 1.13/16 058307
35 0.1100 7/8 1.7/8 060035
34 0.1110 7/8 1.7/8 060034
33 0.1130 7/8 1.7/8 060033
32 0.1160 7/8 1.7/8 060032
31 0.1200 7/8 1.7/8 060031
1/8 0.1250 7/8 1.7/8 058308
30 0.1285 15/16 1.15/16 060030
29 0.1360 15/16 1.15/16 060029
28 0.1405 15/16 1.15/16 060028
9/64 0.1406 15/16 1.15/16 058309
27 0.1440 1“ 2.1/16 060027
26 0.1470 1“ 2.1/16 060026
25 0.1495 1“ 2.1/16 060025
24 0.1520 1“ 2.1/16 060024
23 0.1540 1“ 2.1/16 060023
5/32 0.1562 1“ 2.1/16 058310
22 0.1570 1.1/16 2.1/8 060022
21 0.1590 1.1/16 2.1/8 060021
20 0.1610 1.1/16 2.1/8 060020
19 0.1660 1.1/16 2.1/8 060019
18 0.1695 1.1/16 2.1/8 060018
11/64 0.1719 1.1/16 2.1/8 058311
17 0.1730 1.1/8 2.3/16 060017
16 0.1770 1.1/8 2.3/16 060016
15 0.1800 1.1/8 2.3/16 060015
14 0.1820 1.1/8 2.3/16 060014
13 0.1850 1.1/8 2.3/16 060013
3/16 0.1875 1.1/8 2.3/16 058312
12 0.1890 1.3/16 2.1/4 060012
11 0.1910 1.3/16 2.1/4 060011
10 0.1935 1.3/16 2.1/4 060010
90.1960 1.3/16 2.1/4 060009
80.1990 1.3/16 2.1/4 060008
70.2010 1.3/16 2.1/4 060007
13/64 0.2031 1.3/16 2.1/4 058313
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
60.2040 1.1/4 2.3/8 060006
50.2055 1.1/4 2.3/8 060005
40.2090 1.1/4 2.3/8 060004
30.2130 1.1/4 2.3/8 060003
7/32 0.2188 1.1/4 2.3/8 058314
20.2210 1.5/16 2.7/16 060002
10.2280 1.5/16 2.7/16 060001
15/64 0.2344 1.5/16 2.7/16 058315
1/4 0.2500 1.3/8 2.1/2 058316
17/64 0.2656 1.7/16 2.5/8 058317
9/32 0.2812 1.1/2 2.11/16 058318
19/64 0.2969 1.9/16 2.3/4 058319
5/16 0.3125 1.5/8 2.13/16 058320
21/64 0.3281 1.11/16 2.15/16 058321
11/32 0.3438 1.11/16 3“ 058322
23/64 0.3594 1.3/4 3.1/16 058323
3/8 0.3750 1.13/16 3.1/8 058324
25/64 0.3906 1.7/8 3.1/4 058325
13/32 0.4062 1.15/16 3.5/16 058326
27/64 0.4219 2“ 3.3/8 058327
7/16 0.4375 2.1/16 3.7/16 058328
29/64 0.4531 2.1/8 3.9/16 058329
15/32 0.4688 2.1/8 3.5/8 058330
31/64 0.4844 2.3/16 3.3/4 058331
ƔStub drill ƔBroca extra corta
Ɣ Wide-land parabolic fl ute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
40 www.precisiondormer.com
M42CO
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
A0.2340 1.5/16 2.7/16 042301
B0.2380 1.3/8 2.1/2 042302
C0.2420 1.3/8 2.1/2 042303
D0.2460 1.3/8 2.1/2 042304
E0.2500 1.3/8 2.1/2 042305
F0.2570 1.7/16 2.5/8 042306
G0.2610 1.7/16 2.5/8 042307
H0.2660 1.1/2 2.11/16 042308
I0.2720 1.1/2 2.11/16 042309
J0.2770 1.1/2 2.11/16 042310
K0.2810 1.1/2 2.11/16 042311
L0.2900 1.9/16 2.3/4 042312
M0.2950 1.9/16 2.3/4 042313
N0.3020 1.5/8 2.13/16 042314
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
O0.3160 1.11/16 2.15/16 042315
P0.3230 1.11/16 2.15/16 042316
Q0.3320 1.11/16 3“ 042317
R0.3390 1.11/16 3“ 042318
S0.3480 1.3/4 3.1/16 042319
T0.3580 1.3/4 3.1/16 042320
U0.3680 1.13/16 3.1/8 042321
V0.3770 1.7/8 3.1/4 042322
W0.3860 1.7/8 3.1/4 042323
X0.3970 1.15/16 3.5/16 042324
Y0.4040 1.15/16 3.5/16 042325
Z0.4130 2“ 3.3/8 042326
M40CO - M42CO
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 5/8 1.5/8 040304
5/64 0.0781 11/16 1.11/16 040305
3/32 0.0938 3/4 1.3/4 040306
7/64 0.1094 13/16 1.13/16 040307
1/8 0.1250 7/8 1.7/8 040308
9/64 0.1406 15/16 1.15/16 040309
5/32 0.1562 1“ 2.1/16 040310
11/64 0.1719 1.1/16 2.1/8 040311
3/16 0.1875 1.1/8 2.3/16 040312
13/64 0.2031 1.3/16 2.1/4 040313
7/32 0.2188 1.1/4 2.3/8 040314
15/64 0.2344 1.5/16 2.7/16 040315
1/4 0.2500 1.3/8 2.1/2 040316
17/64 0.2656 1.7/16 2.5/8 040317
9/32 0.2812 1.1/2 2.11/16 040318
19/64 0.2969 1.9/16 2.3/4 040319
5/16 0.3125 1.5/8 2.13/16 040320
21/64 0.3281 1.11/16 2.15/16 040321
11/32 0.3438 1.11/16 3“ 040322
23/64 0.3594 1.3/4 3.1/16 040323
3/8 0.3750 1.13/16 3.1/8 040324
25/64 0.3906 1.7/8 3.1/4 040325
13/32 0.4062 1.15/16 3.5/16 040326
27/64 0.4219 2“ 3.3/8 040327
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
7/16 0.4375 2.1/16 3.7/16 040328
29/64 0.4531 2.1/8 3.9/16 040329
15/32 0.4688 2.1/8 3.5/8 040330
31/64 0.4844 2.3/16 3.11/16 040331
1/2 0.5000 2.1/4 3.3/4 040332
33/64 0.5156 2.3/8 3.7/8 046033
17/32 0.5312 2.3/8 3.7/8 046034
35/64 0.5469 2.1/2 4“ 046035
9/16 0.5625 2.1/2 4“ 046036
37/64 0.5781 2.5/8 4.1/8 046037
19/32 0.5938 2.5/8 4.1/8 046038
39/64 0.6094 2.3/4 4.1/4 046039
5/8 0.6250 2.3/4 4.1/4 046040
41/64 0.6406 2.7/8 4.1/2 046041
21/32 0.6562 2.7/8 4.1/2 046042
43/64 0.6719 2.7/8 4.5/8 046043
11/16 0.6875 2.7/8 4.5/8 046044
45/64 0.7031 3“ 4.3/4 046045
23/32 0.7188 3“ 4.3/4 046046
47/64 0.7344 3.1/8 5“ 046047
3/4 0.7500 3.1/8 5“ 046048
ƔStub drill Ɣ Foret extra-court Ɣ Broca extra corta
M40CO
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 41
www.precisiondormer.com
M41CO
ƔStub drill Ɣ Broca extra corta
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
60 0.0400 1/2 1.3/8 041360 1)
59 0.0410 1/2 1.3/8 041359 1)
58 0.0420 1/2 1.3/8 041358 1)
57 0.0430 1/2 1.3/8 041357 1)
56 0.0465 1/2 1.3/8 041356 1)
55 0.0520 5/8 1.5/8 041355 1)
54 0.0550 5/8 1.5/8 041354 1)
53 0.0595 5/8 1.5/8 041353 1)
52 0.0635 11/16 1.11/16 041352
51 0.0670 11/16 1.11/16 041351
50 0.0700 11/16 1.11/16 041350
49 0.0730 11/16 1.11/16 041349
48 0.0760 11/16 1.11/16 041348
47 0.0785 11/16 1.11/16 041347
46 0.0810 3/4 1.3/4 041346
45 0.0820 3/4 1.3/4 041345
44 0.0860 3/4 1.3/4 041344
43 0.0890 3/4 1.3/4 041343
42 0.0935 3/4 1.3/4 041342
41 0.0960 13/16 1.13/16 041341
40 0.0980 13/16 1.13/16 041340
39 0.0995 13/16 1.13/16 041339
38 0.1015 13/16 1.13/16 041338
37 0.1040 13/16 1.13/16 041337
36 0.1065 13/16 1.13/16 041336
35 0.1100 7/8 1.7/8 041335
34 0.1110 7/8 1.7/8 041334
33 0.1130 7/8 1.7/8 041333
32 0.1160 7/8 1.7/8 041332
31 0.1200 7/8 1.7/8 041331
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
30 0.1285 15/16 1.15/16 041330
29 0.1360 15/16 1.15/16 041329
28 0.1405 15/16 1.15/16 041328
27 0.1440 1“ 2.1/16 041327
26 0.1470 1“ 2.1/16 041326
25 0.1495 1“ 2.1/16 041325
24 0.1520 1“ 2.1/16 041324
23 0.1540 1“ 2.1/16 041323
22 0.1570 1.1/16 2.1/8 041322
21 0.1590 1.1/16 2.1/8 041321
20 0.1610 1.1/16 2.1/8 041320
19 0.1660 1.1/16 2.1/8 041319
18 0.1695 1.1/16 2.1/8 041318
17 0.1730 1.1/8 2.3/16 041317
16 0.1770 1.1/8 2.3/16 041316
15 0.1800 1.1/8 2.3/16 041315
14 0.1820 1.1/8 2.3/16 041314
13 0.1850 1.1/8 2.3/16 041313
12 0.1890 1.3/16 2.1/4 041312
11 0.1910 1.3/16 2.1/4 041311
10 0.1935 1.3/16 2.1/4 041310
90.1960 1.3/16 2.1/4 041309
80.1990 1.3/16 2.1/4 041308
70.2010 1.3/16 2.1/4 041307
60.2040 1.1/4 2.3/8 041306
50.2055 1.1/4 2.3/8 041305
40.2090 1.1/4 2.3/8 041304
30.2130 1.1/4 2.3/8 041303
20.2210 1.5/16 2.7/16 041302
10.2280 1.5/16 2.7/16 041301
Ɣ Foret extra-court
1) Not a split point
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
42 www.precisiondormer.com
4ASMCO
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
2.30 0.0906 13 40 032230
2.50 0.0984 14 43 032250
3.00 0.1181 16 46 032300
3.10 0.1220 18 49 032310
3.20 0.1260 18 49 032320
3.30 0.1299 18 49 032330
3.40 0.1339 20 52 032340
3.50 0.1378 20 52 032350
3.60 0.1417 20 52 032360
3.70 0.1457 20 52 032370
4.00 0.1575 22 55 032400
4.10 0.1614 22 55 032410
4.20 0.1654 22 55 032420
4.70 0.1850 24 58 032470
4.80 0.1890 26 62 032480
4.90 0.1929 26 62 032490
5.00 0.1969 26 62 032500
5.10 0.2008 26 62 032510
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
5.50 0.2165 28 66 032550
5.70 0.2244 28 66 032570
6.00 0.2362 28 66 032600
6.40 0.2520 31 70 032640
6.50 0.2559 31 70 032650
6.80 0.2677 34 74 032680
7.00 0.2756 34 74 032700
8.00 0.3150 37 79 032800
8.50 0.3346 37 79 032850
9.50 0.3740 40 84 032950
9.80 0.3858 43 89 032980
10.00 0.3937 43 89 033000
10.20 0.4016 43 89 033002
10.50 0.4134 43 89 033005
11.00 0.4331 47 95 033110
11.20 0.4409 47 95 033112
11.50 0.4528 47 95 033115
12.00 0.4724 51 102 033200
ƔStub drill Ɣ Foret extra-court ƔBroca extra corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 43
www.precisiondormer.com
Ɣ Foret extra-court
EZ40G
ƔStub drill ƔBroca extra corta
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 5/8 1.5/8 042504
5/64 0.0781 11/16 1.11/16 042505
3/32 0.0938 3/4 1.3/4 042506
7/64 0.1094 13/16 1.13/16 042507
1/8 0.1250 7/8 1.7/8 042508
9/64 0.1406 15/16 1.15/16 042509
5/32 0.1562 1“ 2.1/16 042510
11/64 0.1719 1.1/16 2.1/8 042511
3/16 0.1875 1.1/8 2.3/16 042512
13/64 0.2031 1.3/16 2.1/4 042513
7/32 0.2188 1.1/4 2.3/8 042514
15/64 0.2344 1.5/16 2.7/16 042515
1/4 0.2500 1.3/8 2.1/2 042516
17/64 0.2656 1.7/16 2.5/8 042517
9/32 0.2812 1.1/2 2.11/16 042518
19/64 0.2969 1.9/16 2.3/4 042519
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
5/16 0.3125 1.5/8 2.13/16 042520
21/64 0.3281 1.11/16 2.15/16 042521
11/32 0.3438 1.11/16 3“ 042522
23/64 0.3594 1.3/4 3.1/16 042523
3/8 0.3750 1.13/16 3.1/8 042524
25/64 0.3906 1.7/8 3.1/4 042525
13/32 0.4062 1.15/16 3.5/16 042526
27/64 0.4219 2“ 3.3/8 042527
7/16 0.4375 2.1/16 3.7/16 042528
29/64 0.4531 2.1/8 3.9/16 042529
15/32 0.4688 2.1/8 3.5/8 042530
31/64 0.4844 2.3/16 3.11/16 042531
1/2 0.5000 2.1/4 3.3/4 042532
Ɣ Parabolic fl ute Ɣ Goujure parabolique ƔCanal Parabólico
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
44 www.precisiondormer.com
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 5/8 1.5/8 043604
5/64 0.0781 11/16 1.11/16 043605
3/32 0.0938 3/4 1.3/4 043606
7/64 0.1094 13/16 1.13/16 043607
1/8 0.1250 7/8 1.7/8 043608
9/64 0.1406 15/16 1.15/16 043609
5/32 0.1562 1“ 2.1/16 043610
11/64 0.1719 1.1/16 2.1/8 043611
3/16 0.1875 1.1/8 2.3/16 043612
13/64 0.2031 1.3/16 2.1/4 043613
7/32 0.2188 1.1/4 2.3/8 043614
15/64 0.2344 1.5/16 2.7/16 043615
1/4 0.2500 1.3/8 2.1/2 043616
17/64 0.2656 1.7/16 2.5/8 043617
9/32 0.2812 1.1/2 2.11/16 043618
19/64 0.2969 1.9/16 2.3/4 043619
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
5/16 0.3125 1.5/8 2.13/16 043620
21/64 0.3281 1.11/16 2.15/16 043621
11/32 0.3438 1.11/16 3“ 043622
23/64 0.3594 1.3/4 3.1/16 043623
3/8 0.3750 1.13/16 3.1/8 043624
25/64 0.3906 1.7/8 3.1/4 043625
13/32 0.4062 1.15/16 3.5/16 043626
27/64 0.4219 2“ 3.3/8 043627
7/16 0.4375 2.1/16 3.7/16 043628
29/64 0.4531 2.1/8 3.9/16 043629
15/32 0.4688 2.1/8 3.5/8 043630
31/64 0.4844 2.3/16 3.11/16 043631
1/2 0.5000 2.1/4 3.3/4 043632
Ŷ
Ɣ
EZ40P
Ɣ Foret extra-courtƔStub drill ƔBroca extra corta
ƔParabolic fl ute ƔGoujure parabolique Ɣ Canal Parabólico
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 45
www.precisiondormer.com
d1d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
40 0.0980 13/16 1.13/16 043740
39 0.0995 13/16 1.13/16 043739
38 0.1015 13/16 1.13/16 043738
37 0.1040 13/16 1.13/16 043737
d1d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
36 0.1065 13/16 1.13/16 043736
35 0.1100 7/8 1.7/8 043735
34 0.1110 7/8 1.7/8 043734
33 0.1130 7/8 1.7/8 043733
ŶƔ
d1d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
40 0.0980 13/16 1.13/16 042640
39 0.0995 13/16 1.13/16 042639
38 0.1015 13/16 1.13/16 042638
37 0.1040 13/16 1.13/16 042637
36 0.1065 13/16 1.13/16 042636
35 0.1100 7/8 1.7/8 042635
34 0.1110 7/8 1.7/8 042634
33 0.1130 7/8 1.7/8 042633
32 0.1160 7/8 1.7/8 042632
31 0.1200 7/8 1.7/8 042631
30 0.1285 15/16 1.15/16 042630
29 0.1360 15/16 1.15/16 042629
28 0.1405 15/16 1.15/16 042628
27 0.1440 1“ 2.1/16 042627
26 0.1470 1“ 2.1/16 042626
25 0.1495 1“ 2.1/16 042625
24 0.1520 1“ 2.1/16 042624
23 0.1540 1“ 2.1/16 042623
22 0.1570 1.1/16 2.1/8 042622
21 0.1590 1.1/16 2.1/8 042621
d1d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
20 0.1610 1.1/16 2.1/8 042620
19 0.1660 1.1/16 2.1/8 042619
18 0.1695 1.1/16 2.1/8 042618
17 0.1730 1.1/8 2.3/16 042617
16 0.1770 1.1/8 2.3/16 042616
15 0.1800 1.1/8 2.3/16 042615
14 0.1820 1.1/8 2.3/16 042614
13 0.1850 1.1/8 2.3/16 042613
12 0.1890 1.3/16 2.1/4 042612
11 0.1910 1.3/16 2.1/4 042611
10 0.1935 1.3/16 2.1/4 042610
90.1960 1.3/16 2.1/4 042609
80.1990 1.3/16 2.1/4 042608
70.2010 1.3/16 2.1/4 042607
60.2040 1.1/4 2.3/8 042606
50.2055 1.1/4 2.3/8 042605
40.2090 1.1/4 2.3/8 042604
30.2130 1.1/4 2.3/8 042603
20.2210 1.5/16 2.7/16 042602
10.2280 1.5/16 2.7/16 042601
EZ41G - EZ41P
Ɣ
Ŷ
Ɣ Foret extra-courtƔStub drill ƔBroca extra corta
ƔParabolic fl ute ƔGoujure parabolique Ɣ Canal Parabólico
Ɣ Foret extra-court
ƔStub Drill ƔBroca extra corta
EZ41G
EZ41P
EZ41P
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
46 www.precisiondormer.com
Ɣ Foret extra-court
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 5/8 1.5/8 040804
5/64 0.0781 11/16 1.11/16 040805
3/32 0.0938 3/4 1.3/4 040806
7/64 0.1094 13/16 1.13/16 040807
1/8 0.1250 7/8 1.7/8 040808
9/64 0.1406 15/16 1.15/16 040809
5/32 0.1562 1“ 2.1/16 040810
11/64 0.1719 1.1/16 2.1/8 040811
3/16 0.1875 1.1/8 2.3/16 040812
13/64 0.2031 1.3/16 2.1/4 040813
7/32 0.2188 1.1/4 2.3/8 040814
15/64 0.2344 1.5/16 2.7/16 040815
1/4 0.2500 1.3/8 2.1/2 040816
17/64 0.2656 1.7/16 2.5/8 040817
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
9/32 0.2812 1.1/2 2.11/16 040818
19/64 0.2969 1.9/16 2.3/4 040819
5/16 0.3125 1.5/8 2.13/16 040820
21/64 0.3281 1.11/16 2.15/16 040821
11/32 0.3438 1.11/16 3“ 040822
23/64 0.3594 1.3/4 3.1/16 040823
3/8 0.3750 1.13/16 3.1/8 040824
25/64 0.3906 1.7/8 3.1/4 040825
13/32 0.4062 1.15/16 3.5/16 040826
27/64 0.4219 2“ 3.3/8 040827
7/16 0.4375 2.1/16 3.7/16 040828
29/64 0.4531 2.1/8 3.9/16 040829
15/32 0.4688 2.1/8 3.5/8 040830
31/64 0.4844 2.3/16 3.11/16 040831
1/2 0.5000 2.1/4 3.3/4 040832
ƔStub Drill, Type C ƔBroca extra corta
d1d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
32 0.1160 7/8 1.7/8 043732
31 0.1200 7/8 1.7/8 043731
30 0.1285 15/16 1.15/16 043730
29 0.1360 15/16 1.15/16 043729
28 0.1405 15/16 1.15/16 043728
27 0.1440 1“ 2.1/16 043727
26 0.1470 1“ 2.1/16 043726
25 0.1495 1“ 2.1/16 043725
24 0.1520 1“ 2.1/16 043724
23 0.1540 1“ 2.1/16 043723
22 0.1570 1.1/16 2.1/8 043722
21 0.1590 1.1/16 2.1/8 043721
20 0.1610 1.1/16 2.1/8 043720
19 0.1660 1.1/16 2.1/8 043719
18 0.1695 1.1/16 2.1/8 043718
17 0.1730 1.1/8 2.3/16 043717
d1d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
16 0.1770 1.1/8 2.3/16 043716
15 0.1800 1.1/8 2.3/16 043715
14 0.1820 1.1/8 2.3/16 043714
13 0.1850 1.1/8 2.3/16 043713
12 0.1890 1.3/16 2.1/4 043712
11 0.1910 1.3/16 2.1/4 043711
10 0.1935 1.3/16 2.1/4 043710
90.1960 1.3/16 2.1/4 043709
80.1990 1.3/16 2.1/4 043708
70.2010 1.3/16 2.1/4 043707
60.2040 1.1/4 2.3/8 043706
50.2055 1.1/4 2.3/8 043705
40.2090 1.1/4 2.3/8 043704
30.2130 1.1/4 2.3/8 043703
20.2210 1.5/16 2.7/16 043702
10.2280 1.5/16 2.7/16 043701
EZ41P - R40C
R40C
EZ41P
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 47
www.precisiondormer.com
Ɣ Foret extra-court
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
60 0.0400 1/2 1.3/8 041860 1)
59 0.0410 1/2 1.3/8 041859 1)
58 0.0420 1/2 1.3/8 041858 1)
57 0.0430 1/2 1.3/8 041857 1)
56 0.0465 1/2 1.3/8 041856 1)
55 0.0520 5/8 1.5/8 041855 1)
54 0.0550 5/8 1.5/8 041854 1)
53 0.0595 5/8 1.5/8 041853 1)
52 0.0635 11/16 1.11/16 041852
51 0.0670 11/16 1.11/16 041851
50 0.0700 11/16 1.11/16 041850
49 0.0730 11/16 1.11/16 041849
48 0.0760 11/16 1.11/16 041848
47 0.0785 11/16 1.11/16 041847
46 0.0810 3/4 1.3/4 041846
45 0.0820 3/4 1.3/4 041845
44 0.0860 3/4 1.3/4 041844
43 0.0890 3/4 1.3/4 041843
42 0.0935 3/4 1.3/4 041842
41 0.0960 13/16 1.13/16 041841
40 0.0980 13/16 1.13/16 041840
39 0.0995 13/16 1.13/16 041839
38 0.1015 13/16 1.13/16 041838
37 0.1040 13/16 1.13/16 041837
36 0.1065 13/16 1.13/16 041836
35 0.1100 7/8 1.7/8 041835
34 0.1110 7/8 1.7/8 041834
33 0.1130 7/8 1.7/8 041833
32 0.1160 7/8 1.7/8 041832
31 0.1200 7/8 1.7/8 041831
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
30 0.1285 15/16 1.15/16 041830
29 0.1360 15/16 1.15/16 041829
28 0.1405 15/16 1.15/16 041828
27 0.1440 1“ 2.1/16 041827
26 0.1470 1“ 2.1/16 041826
25 0.1495 1“ 2.1/16 041825
24 0.1520 1“ 2.1/16 041824
23 0.1540 1“ 2.1/16 041823
22 0.1570 1.1/16 2.1/8 041822
21 0.1590 1.1/16 2.1/8 041821
20 0.1610 1.1/16 2.1/8 041820
19 0.1660 1.1/16 2.1/8 041819
18 0.1695 1.1/16 2.1/8 041818
17 0.1730 1.1/8 2.3/16 041817
16 0.1770 1.1/8 2.3/16 041816
15 0.1800 1.1/8 2.3/16 041815
14 0.1820 1.1/8 2.3/16 041814
13 0.1850 1.1/8 2.3/16 041813
12 0.1890 1.3/16 2.1/4 041812
11 0.1910 1.3/16 2.1/4 041811
10 0.1935 1.3/16 2.1/4 041810
90.1960 1.3/16 2.1/4 041809
80.1990 1.3/16 2.1/4 041808
70.2010 1.3/16 2.1/4 041807
60.2040 1.1/4 2.3/8 041806
50.2055 1.1/4 2.3/8 041805
40.2090 1.1/4 2.3/8 041804
30.2130 1.1/4 2.3/8 041803
20.2210 1.5/16 2.7/16 041802
10.2280 1.5/16 2.7/16 041801
R41C
ƔStub drill ƔBroca extra corta
1) Not a split point
Ɣ Type C
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
48 www.precisiondormer.com
Ɣ Foret extra-court
R42C
ƔStub drill ƔBroca extra corta
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
A0.2340 1.5/16 2.7/16 042801
B0.2380 1.3/8 2.1/2 042802
C0.2420 1.3/8 2.1/2 042803
D0.2460 1.3/8 2.1/2 042804
E0.2500 1.3/8 2.1/2 042805
F0.2570 1.7/16 2.5/8 042806
G0.2610 1.7/16 2.5/8 042807
H0.2660 1.1/2 2.11/16 042808
I0.2720 1.1/2 2.11/16 042809
J0.2770 1.1/2 2.11/16 042810
K0.2810 1.1/2 2.11/16 042811
L0.2900 1.9/16 2.3/4 042812
M0.2950 1.9/16 2.3/4 042813
N0.3020 1.5/8 2.13/16 042814
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
O0.3160 1.11/16 2.15/16 042815
P0.3230 1.11/16 2.15/16 042816
Q0.3320 1.11/16 3“ 042817
R0.3390 1.11/16 3“ 042818
S0.3480 1.3/4 3.1/16 042819
T0.3580 1.3/4 3.1/16 042820
U0.3680 1.13/16 3.1/8 042821
V0.3770 1.7/8 3.1/4 042822
W0.3860 1.7/8 3.1/4 042823
X0.3970 1.15/16 3.5/16 042824
Y0.4040 1.15/16 3.5/16 042825
Z0.4130 2“ 3.3/8 042826
Ɣ Type C
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 49
www.precisiondormer.com
Ɣ Foret extra-courtƔStub drill ƔBroca extra corta
4ASM
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
1.00 0.0394 6 22 046100 1)
1.25 0.0492 8 30 046125 1)
1.30 0.0512 8 30 046130 1)
1.65 0.0650 11 34 046165
2.00 0.0787 12 38 046200
2.30 0.0906 13 40 046230
2.40 0.0945 14 43 046240
2.50 0.0984 14 43 046250
3.00 0.1181 16 46 046300
3.10 0.1220 18 49 046310
3.20 0.1260 18 49 046320
3.30 0.1299 18 49 046330
3.40 0.1339 20 52 046340
3.50 0.1378 20 52 046350
3.70 0.1457 20 52 046370
4.00 0.1575 22 55 046400
4.20 0.1654 22 55 046420
4.50 0.1772 24 58 046450
5.00 0.1969 26 62 046500
5.50 0.2165 28 66 046550
5.70 0.2244 28 66 046570
5.80 0.2283 28 66 046580
6.00 0.2362 28 66 046600
6.20 0.2441 31 70 046620
6.40 0.2520 31 70 046640
6.50 0.2559 31 70 046650
6.60 0.2598 31 70 046660
6.80 0.2677 34 74 046680
1) Not Split Point
6.90 0.2717 34 74 046690
7.00 0.2756 34 74 046700
7.20 0.2835 34 74 046720
7.50 0.2953 37 79 046750
8.00 0.3150 37 79 046800
8.10 0.3189 37 79 046810
8.40 0.3307 37 79 046840
8.50 0.3346 37 79 046850
8.70 0.3425 40 84 046870
9.00 0.3543 40 84 046900
9.10 0.3583 40 84 046910
9.20 0.3622 40 84 046920
9.30 0.3661 40 84 046930
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
9.50 0.3740 40 84 046950
9.70 0.3819 43 89 046970
10.00 0.3937 43 89 047000
10.20 0.4016 43 89 047002
10.50 0.4134 43 89 047005
10.80 0.4252 47 95 047008
11.00 0.4331 47 95 047110
11.20 0.4409 47 95 047112
11.50 0.4528 47 95 047115
11.80 0.4646 47 95 047118
12.00 0.4724 51 102 047200
12.20 0.4803 51 102 047220
12.50 0.4921 51 102 047250
Ɣ Type C
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
50 www.precisiondormer.com
Ɣ Foret extra-court
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
3/64 0.0469 1/2 1.3/8 040003
1/16 0.0625 5/8 1.5/8 040004
5/64 0.0781 11/16 1.11/16 040005
3/32 0.0938 3/4 1.3/4 040006
7/64 0.1094 13/16 1.13/16 040007
1/8 0.1250 7/8 1.7/8 040008
9/64 0.1406 15/16 1.15/16 040009
5/32 0.1562 1“ 2.1/16 040010
11/64 0.1719 1.1/16 2.1/8 040011
3/16 0.1875 1.1/8 2.3/16 040012
13/64 0.2031 1.3/16 2.1/4 040013
7/32 0.2188 1.1/4 2.3/8 040014
15/64 0.2344 1.5/16 2.7/16 040015
1/4 0.2500 1.3/8 2.1/2 040016
17/64 0.2656 1.7/16 2.5/8 040017
9/32 0.2812 1.1/2 2.11/16 040018
19/64 0.2969 1.9/16 2.3/4 040019
5/16 0.3125 1.5/8 2.13/16 040020
21/64 0.3281 1.11/16 2.15/16 040021
11/32 0.3438 1.11/16 3“ 040022
23/64 0.3594 1.3/4 3.1/16 040023
3/8 0.3750 1.13/16 3.1/8 040024
25/64 0.3906 1.7/8 3.1/4 040025
13/32 0.4062 1.15/16 3.5/16 040026
27/64 0.4219 2“ 3.3/8 040027
7/16 0.4375 2.1/16 3.7/16 040028
29/64 0.4531 2.1/8 3.9/16 040029
15/32 0.4688 2.1/8 3.5/8 040030
31/64 0.4844 2.3/16 3.11/16 040031
1/2 0.5000 2.1/4 3.3/4 040032
33/64 0.5156 2.3/8 3.7/8 040033
17/32 0.5312 2.3/8 3.7/8 040034
35/64 0.5469 2.1/2 4“ 040035
9/16 0.5625 2.1/2 4“ 040036
37/64 0.5781 2.5/8 4.1/8 040037
19/32 0.5938 2.5/8 4.1/8 040038
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
39/64 0.6094 2.3/4 4.1/4 040039
5/8 0.6250 2.3/4 4.1/4 040040
41/64 0.6406 2.7/8 4.1/2 040041
21/32 0.6562 2.7/8 4.1/2 040042
43/64 0.6719 2.7/8 4.5/8 040043
11/16 0.6875 2.7/8 4.5/8 040044
45/64 0.7031 3“ 4.3/4 040545
23/32 0.7188 3“ 4.3/4 040546
47/64 0.7344 3.1/8 5“ 040547
3/4 0.7500 3.1/8 5“ 040548
49/64 0.7656 3.1/4 5.1/8 040549
25/32 0.7812 3.1/4 5.1/8 040550
51/64 0.7969 3.3/8 5.1/4 040551
13/16 0.8125 3.3/8 5.1/4 040552
53/64 0.8281 3.1/2 5.3/8 040553
27/32 0.8438 3.1/2 5.3/8 040554
55/64 0.8594 3.1/2 5.1/2 040555
7/8 0.8750 3.1/2 5.1/2 040556
57/64 0.8906 3.5/8 5.5/8 040557
29/32 0.9062 3.5/8 5.5/8 040558
59/64 0.9219 3.3/4 5.3/4 040559
15/16 0.9375 3.3/4 5.3/4 040560
61/64 0.9531 3.7/8 5.7/8 040561
31/32 0.9688 3.7/8 5.7/8 040562
63/64 0.9844 4“ 6“ 040563
1“ 1.0000 4“ 6“ 040600
1.1/16 1.0625 4“ 6.1/4 040604
1.1/8 1.1250 4“ 6.3/8 040608
1.3/16 1.1875 4.1/4 6.5/8 040612
1.1/4 1.2500 4.3/8 6.3/4 040616
1.5/16 1.3125 4.3/8 7“ 040620
1.3/8 1.3750 4.1/2 7.1/8 040624
1.7/16 1.4375 4.3/4 7.3/8 040628
1.1/2 1.5000 4.7/8 7.1/2 040632
1.9/16 1.5625 4.7/8 7.3/4 040636
1.5/8 1.6250 4.7/8 7.3/4 040640
1.11/16 1.6875 5.1/8 8“ 040644
1.3/4 1.7500 5.1/8 8“ 040648
1.13/16 1.8125 5.3/8 8.1/4 040652
1.7/8 1.8750 5.3/8 8.1/4 040656
2“ 2.0000 5.5/8 8.1/2 040700
R40
1) 1” Reduced Shank for dia 1.1/16” - 1.1/4”
1.1/4” Reduced Shank for dia 1.5/16” - 1.1/2”
1.1/2” Reduced Shank for dia 1.9/16” - 2”
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
ƔStub drill ƔBroca extra corta
Note: Sizes 45/64” through 2” are black oxide
Ŷ
Ɣ
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 51
www.precisiondormer.com
Ɣ Foret extra-court
R41
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
60 0.0400 1/2 1.3/8 041060
59 0.0410 1/2 1.3/8 041059
58 0.0420 1/2 1.3/8 041058
57 0.0430 1/2 1.3/8 041057
56 0.0465 1/2 1.3/8 041056
55 0.0520 5/8 1.5/8 041055
54 0.0550 5/8 1.5/8 041054
53 0.0595 5/8 1.5/8 041053
52 0.0635 11/16 1.11/16 041052
51 0.0670 11/16 1.11/16 041051
50 0.0700 11/16 1.11/16 041050
49 0.0730 11/16 1.11/16 041049
48 0.0760 11/16 1.11/16 041048
47 0.0785 11/16 1.11/16 041047
46 0.0810 3/4 1.3/4 041046
45 0.0820 3/4 1.3/4 041045
44 0.0860 3/4 1.3/4 041044
43 0.0890 3/4 1.3/4 041043
42 0.0935 3/4 1.3/4 041042
41 0.0960 13/16 1.13/16 041041
40 0.0980 13/16 1.13/16 041040
39 0.0995 13/16 1.13/16 041039
38 0.1015 13/16 1.13/16 041038
37 0.1040 13/16 1.13/16 041037
36 0.1065 13/16 1.13/16 041036
35 0.1100 7/8 1.7/8 041035
34 0.1110 7/8 1.7/8 041034
33 0.1130 7/8 1.7/8 041033
32 0.1160 7/8 1.7/8 041032
31 0.1200 7/8 1.7/8 041031
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
30 0.1285 15/16 1.15/16 041030
29 0.1360 15/16 1.15/16 041029
28 0.1405 15/16 1.15/16 041028
27 0.1440 1“ 2.1/16 041027
26 0.1470 1“ 2.1/16 041026
25 0.1495 1“ 2.1/16 041025
24 0.1520 1“ 2.1/16 041024
23 0.1540 1“ 2.1/16 041023
22 0.1570 1.1/16 2.1/8 041022
21 0.1590 1.1/16 2.1/8 041021
20 0.1610 1.1/16 2.1/8 041020
19 0.1660 1.1/16 2.1/8 041019
18 0.1695 1.1/16 2.1/8 041018
17 0.1730 1.1/8 2.3/16 041017
16 0.1770 1.1/8 2.3/16 041016
15 0.1800 1.1/8 2.3/16 041015
14 0.1820 1.1/8 2.3/16 041014
13 0.1850 1.1/8 2.3/16 041013
12 0.1890 1.3/16 2.1/4 041012
11 0.1910 1.3/16 2.1/4 041011
10 0.1935 1.3/16 2.1/4 041010
90.1960 1.3/16 2.1/4 041009
80.1990 1.3/16 2.1/4 041008
70.2010 1.3/16 2.1/4 041007
60.2040 1.1/4 2.3/8 041006
50.2055 1.1/4 2.3/8 041005
40.2090 1.1/4 2.3/8 041004
30.2130 1.1/4 2.3/8 041003
20.2210 1.5/16 2.7/16 041002
10.2280 1.5/16 2.7/16 041001
ƔStub drill ƔBroca extra corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
52 www.precisiondormer.com
Ɣ Foret extra-court
R42
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
A0.2340 1.5/16 2.7/16 042001
B0.2380 1.3/8 2.1/2 042002
C0.2420 1.3/8 2.1/2 042003
D0.2460 1.3/8 2.1/2 042004
E0.2500 1.3/8 2.1/2 042005
F0.2570 1.7/16 2.5/8 042006
G0.2610 1.7/16 2.5/8 042007
H0.2660 1.1/2 2.11/16 042008
I0.2720 1.1/2 2.11/16 042009
J0.2770 1.1/2 2.11/16 042010
K0.2810 1.1/2 2.11/16 042011
L0.2900 1.9/16 2.3/4 042012
M0.2950 1.9/16 2.3/4 042013
N0.3020 1.5/8 2.13/16 042014
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
O0.3160 1.11/16 2.15/16 042015
P0.3230 1.11/16 2.15/16 042016
Q0.3320 1.11/16 3“ 042017
R0.3390 1.11/16 3“ 042018
S0.3480 1.3/4 3.1/16 042019
T0.3580 1.3/4 3.1/16 042020
U0.3680 1.13/16 3.1/8 042021
V0.3770 1.7/8 3.1/4 042022
W0.3860 1.7/8 3.1/4 042023
X0.3970 1.15/16 3.5/16 042024
Y0.4040 1.15/16 3.5/16 042025
Z0.4130 2“ 3.3/8 042026
ƔStub drill ƔBroca extra corta
ŶƔ
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 53
www.precisiondormer.com
www.precisiondormer.com 53
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 5/8 1.5/8 040904
5/64 0.0781 11/16 1.11/16 040905
3/32 0.0938 3/4 1.3/4 040906
7/64 0.1094 13/16 1.13/16 040907
1/8 0.1250 7/8 1.7/8 040908
9/64 0.1406 15/16 1.15/16 040909
5/32 0.1562 1“ 2.1/16 040910
11/64 0.1719 1.1/16 2.1/8 040911
3/16 0.1875 1.1/8 2.3/16 040912
13/64 0.2031 1.3/16 2.1/4 040913
7/32 0.2188 1.1/4 2.3/8 040914
15/64 0.2344 1.5/16 2.7/16 040915
1/4 0.2500 1.3/8 2.1/2 040916
17/64 0.2656 1.7/16 2.5/8 040917
9/32 0.2812 1.1/2 2.11/16 040918
19/64 0.2969 1.9/16 2.3/4 040919
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
5/16 0.3125 1.5/8 2.13/16 040920
21/64 0.3281 1.11/16 2.15/16 040921
11/32 0.3438 1.11/16 3“ 040922
23/64 0.3594 1.3/4 3.1/16 040923
3/8 0.3750 1.13/16 3.1/8 040924
25/64 0.3906 1.7/8 3.1/4 040925
13/32 0.4062 1.15/16 3.5/16 040926
27/64 0.4219 2“ 3.3/8 040927
7/16 0.4375 2.1/16 3.7/16 040928
29/64 0.4531 2.1/8 3.9/16 040929
15/32 0.4688 2.1/8 3.5/8 040930
31/64 0.4844 2.3/16 3.11/16 040931
1/2 0.5000 2.1/4 3.3/4 040932
Ɣ Foret extra-courtƔStub drill ƔBroca extra corta
ƔLeft hand
L40
www.precisiondormer.com
ProdType
Icon1
Photo
Icon2
Icon3
Icon4
Icon5
Icon6
Icon7
Icon8
Icon9
Icon10
Icon11
RangeDim
LaunchLo-
goDate
Cata-
1.1 M11
1.2 M12
1.3 M13
1.4 M14
1.5 M15
1.6 M16
1.7 M17
1.8 M18
2.1 M21
2.2 M22
2.3 M23
2.4 M24
3.1 M31
3.2 M32
3.3 M33
3.4 M34
4.1 M41
4.2 M42
4.3 M43
5.1 M51
5.2 M52
5.3 M53
6.1 M61
6.2 M62
6.3 M63
6.4 M64
7.1 M71
7.2 M72
7.3 M73
7.4 M74
8.1 M81
8.2 M82
8.3 M83
9.1 M91
10.1 M101
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
HSS Jobber Drills
HSS Jobber Drills
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Depth of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 279 U
279 = SFM
U = Alpha Code to find your Feed Rate
To calculate Cutting Feed Rate, refer to chart on pages 9-10.
Page # for easy reference
Ɣ = Good for Application
Ŷ = Excellent for Application
7
Style:
Tool Material:
Finish/Coating:
Standard:
Direction of Cut:
Depth of Cut:
Tool Length:
Helix:
Shank:
Point Angle:
Point Style:
Point Type:
54
1
1
2
2
3
3
4
4
3
3
2
2
1
1
A553 A554 A510 A577
58 59 60-61 62-63
Ŷ279L Ŷ279L Ŷ187M Ɣ184J
Ŷ230L Ŷ230L Ŷ154M Ɣ157J
Ŷ197L Ŷ197L Ŷ131K Ŷ131I
Ŷ148H Ŷ148H Ŷ98H Ŷ131I
Ŷ92F Ŷ92F Ŷ69F Ŷ98G
Ŷ49D Ŷ49D Ɣ36D Ŷ85G
Ŷ131G Ŷ131G Ŷ92G Ɣ56E
Ŷ62I Ŷ62I Ŷ46I Ŷ30E
Ɣ89G Ɣ89G Ɣ62G Ɣ36C
Ŷ230K Ŷ230K Ŷ138K Ŷ174I
Ŷ164J Ŷ164J Ŷ105J Ŷ141I
Ŷ148J Ŷ148J Ŷ92J Ŷ105G
Ŷ138F Ŷ138F Ŷ82F Ŷ79G
Ŷ148G Ŷ148G Ɣ105G Ɣ115G
Ɣ98E Ɣ98E Ɣ66H Ɣ79G
Ɣ26C Ɣ26C Ɣ13B Ɣ33E
Ɣ82I Ɣ82I Ɣ56I Ɣ72I
Ɣ49E Ɣ49E Ɣ30E Ɣ36I
Ɣ33G Ɣ33G Ɣ20E Ɣ33E
Ɣ230G Ɣ230G Ɣ131D
Ŷ279I Ŷ279I Ŷ164I
Ŷ262I Ŷ262I Ŷ148I Ɣ177I
Ɣ115G Ɣ115G Ɣ66F Ɣ157I
Ɣ230H Ɣ230H Ɣ164G
Ŷ328M Ŷ328M Ŷ164M
Ŷ180I Ŷ180I Ŷ102I
Ŷ180J Ŷ180J Ŷ108I Ŷ157I
Ŷ295G Ŷ295G Ŷ213G
Ŷ164G
Ŷ115F
ADX PFX
ADX ADX
Surface Feet per Minute (SFM)
www.precisiondormer.com
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
HSS Jobber Drills
HSS Jobber Drills(con‘t)
55
A141 A012 A002 QC21CO
QC21COM QC21V QC21G QC21 QC21P QC21GM QC21M QC21PM R10CO
R18CO
R15CO
65 66-67 68-69 70-71 72 73 74 75 76 77 77 78-80
Ɣ115I Ŷ154J Ŷ154J Ɣ115J Ŷ125F Ŷ115F Ŷ98F Ŷ98F Ŷ115F Ŷ98F Ŷ98F Ɣ115J
Ɣ98I Ŷ131J Ŷ131J Ɣ98H Ŷ75F Ŷ69F Ŷ59F Ŷ59F Ŷ69F Ŷ59F Ŷ59F Ɣ98H
Ɣ82G Ŷ115F Ŷ115F Ɣ89G Ŷ79H Ŷ75H Ŷ69H Ŷ66H Ŷ75H Ŷ69H Ŷ66H Ɣ89G
Ɣ66F Ŷ98F Ŷ98F Ɣ79F Ŷ75F Ŷ69F Ŷ59F Ŷ59F Ŷ69F Ŷ59F Ŷ59F Ɣ79F
Ɣ43E Ɣ59F Ɣ59F Ŷ56E Ɣ59D Ɣ56D Ɣ46D Ɣ46D Ɣ56D Ɣ46D Ɣ46D Ŷ56E
Ɣ30D Ɣ33E Ɣ33E Ŷ33D Ŷ33D
Ɣ49E Ɣ66F Ɣ66F Ɣ72E Ɣ115H Ɣ105H Ɣ89H Ɣ89H Ɣ105H Ɣ89H Ɣ89H Ɣ72E
Ŷ30G Ɣ39G Ɣ39G Ɣ36G Ɣ66F Ɣ59F Ɣ49F Ɣ49F Ɣ59F Ɣ49F Ɣ49F Ɣ36G
Ŷ33D Ɣ52C Ɣ52C Ɣ49C Ɣ66D Ɣ59D Ɣ49D Ɣ49D Ɣ59D Ɣ49D Ɣ49D Ɣ49C
Ɣ98H Ŷ131J Ŷ131J Ɣ115H Ŷ184H Ŷ171H Ŷ151H Ŷ151H Ŷ171H Ŷ151H Ŷ151H Ɣ115H
Ɣ79F Ŷ98E Ŷ98E Ɣ92D Ŷ98H Ŷ89H Ŷ79H Ŷ79H Ŷ89H Ŷ79H Ŷ79H Ɣ92D
Ɣ66E Ɣ92E Ɣ92E Ɣ72E Ɣ105F Ɣ95F Ɣ85F Ɣ79F Ɣ95F Ɣ85F Ɣ79F Ɣ72E
Ɣ46E Ɣ85E Ɣ85E Ŷ56E Ɣ66D Ɣ59D Ɣ59D Ŷ56E
Ŷ82G Ɣ75F Ɣ75F Ŷ92F Ɣ95H Ɣ89H Ɣ95H Ɣ89H Ŷ92F
Ŷ52E Ɣ43D Ɣ43D Ŷ66D Ɣ49F Ɣ49F Ɣ49F Ɣ49F Ŷ66D
Ɣ23B Ɣ23B Ɣ23B Ŷ36C Ŷ36C
Ɣ39G Ɣ43G Ɣ43G Ɣ49G Ɣ66H Ɣ59H Ɣ49F Ɣ49F Ɣ59H Ɣ49F Ɣ49F Ɣ49G
Ɣ23G Ɣ23E Ɣ23E Ŷ23E Ŷ23E
Ɣ20E Ɣ10A Ɣ10A Ɣ20B Ɣ20B
Ɣ108G Ɣ164G Ɣ164G Ɣ125H Ŷ112I Ŷ98I Ɣ89I Ŷ98I Ɣ89I Ɣ125H
Ɣ115I Ɣ108I Ɣ108I Ɣ131F Ŷ98H Ŷ89H Ɣ79H Ŷ89H Ɣ79H Ɣ131F
Ɣ102H Ɣ128H Ɣ128H Ɣ84H Ŷ98H Ŷ89H Ɣ79H Ŷ89H Ɣ79H Ɣ89H
Ɣ52G Ɣ98G Ɣ98G Ɣ69F Ɣ69F
Ɣ108J Ŷ134K Ŷ134K Ɣ108J Ŷ440H Ŷ400H Ɣ351H Ŷ400H Ɣ351H Ɣ108J
Ɣ98I Ŷ125J Ŷ125J Ɣ98I Ŷ384H Ŷ351H Ɣ325H Ŷ351H Ɣ325H Ɣ98I
Ɣ89H Ɣ108I Ɣ108I Ɣ98H Ɣ98H
Ɣ79F Ɣ108I Ɣ108I Ɣ89F Ŷ344H Ŷ315H Ɣ276H Ŷ315H Ɣ276H Ɣ89F
Ɣ98J Ŷ98I Ŷ98I
Ɣ92H Ŷ164H Ŷ164H
Ɣ46F Ɣ115F Ɣ115F
Ɣ10B Ɣ10B Ɣ10B Ɣ20C Ɣ20C
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
A907
64
Ɣ115H
Ɣ98H
Ŷ82G
Ŷ82G
Ŷ62E
Ŷ52E
Ɣ49E
Ŷ23E
Ɣ30C
Ɣ108G
Ɣ89G
Ɣ66E
Ɣ49E
Ŷ72E
Ŷ49E
Ŷ20C
Ŷ46G
Ŷ23G
Ŷ20C
Ɣ213G
Ɣ230G
Ɣ112G
Ɣ98G
Ɣ230E
Ŷ148N
Ɣ131N
Ɣ95G
Ɣ180I
Ɣ131G
PFX
Surface Feet per Minute (SFM)
www.precisiondormer.com
ProdType
Icon1
Photo
Icon2
Icon3
Icon4
Icon5
Icon6
Icon7
Icon8
Icon9
Icon10
Icon11
RangeDim
LaunchLo-
goDate
Cata-
1.1 M11
1.2 M12
1.3 M13
1.4 M14
1.5 M15
1.6 M16
1.7 M17
1.8 M18
2.1 M21
2.2 M22
2.3 M23
2.4 M24
3.1 M31
3.2 M32
3.3 M33
3.4 M34
4.1 M41
4.2 M42
4.3 M43
5.1 M51
5.2 M52
5.3 M53
6.1 M61
6.2 M62
6.3 M63
6.4 M64
7.1 M71
7.2 M72
7.3 M73
7.4 M74
8.1 M81
8.2 M82
8.3 M83
9.1 M91
10.1 M101
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
HSS Jobber Drills
HSS Jobber Drills
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Depth of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 279 U
279 = SFM
U = Alpha Code to find your Feed Rate
To calculate Cutting Feed Rate, refer to chart on pages 9-10.
Page # for easy reference
Ɣ = Good for Application
Ŷ = Excellent for Application
7
Style:
Tool Material:
Finish/Coating:
Standard:
Direction of Cut:
Depth of Cut:
Tool Length:
Helix:
Shank:
Point Angle:
Point Style:
Point Type:
56
1
1
2
2
3
3
4
4
3
3
2
2
1
1
2ACO R88CO
R89CO EZ10P
EZ18P
HX10
HX18
HX15
81 83 84 85-86
Ɣ115J Ɣ115J Ŷ115H Ŷ115H
Ɣ98H Ɣ98H Ŷ98H Ŷ69H
Ɣ89G Ɣ89G Ŷ82F Ŷ75I
Ɣ79F Ɣ79F Ŷ66F Ŷ69H
Ŷ56E Ŷ56E Ɣ43E Ɣ56F
Ŷ33D Ŷ33D Ɣ30D
Ɣ72E Ɣ72E Ɣ49E Ɣ105I
Ɣ36G Ɣ36G Ɣ26G Ɣ59H
Ɣ49C Ɣ49C Ɣ30C Ɣ56F
Ɣ115H Ɣ115H Ŷ98H Ŷ171L
Ɣ92D Ɣ92D Ŷ79F Ŷ89I
Ɣ72E Ɣ72E Ɣ66E Ɣ95H
Ŷ56E Ŷ56E Ɣ46E Ɣ59F
Ŷ92F Ŷ92F Ɣ75E Ɣ95H
Ŷ66D Ŷ66D Ɣ39D Ɣ75H
Ŷ36C Ŷ36C Ɣ20B
Ɣ49G Ɣ49G Ɣ33G Ɣ59H
Ŷ23E Ŷ23E Ɣ20E
Ɣ20B Ɣ20B Ɣ10A
Ɣ125H Ɣ125H Ɣ108G
Ɣ131F Ɣ131F Ɣ115I
Ɣ89H Ɣ89H Ɣ89H
Ɣ69F Ɣ69F Ɣ52G
Ɣ108J Ɣ108J Ɣ108J
Ɣ98I Ɣ98I Ɣ98I
Ɣ98H Ɣ98H Ɣ89H
Ɣ89F Ɣ89F Ɣ79F
Ɣ98J
Ɣ92H
Ɣ46F
Ɣ20C Ɣ20C Ɣ10B
Surface Feet per Minute (SFM)
www.precisiondormer.com
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
HSS Jobber Drills
HSS Jobber Drills(con‘t)
57
R10B
R18B
R15B
R10A
R18A
R15A
R10
R18
R15 2AB
87-88 89-90 91-93 94
Ɣ115J Ɣ115J Ŷ115H Ŷ115H
Ɣ98H Ɣ98H Ŷ98H Ŷ98H
Ɣ89G Ɣ89G Ŷ82F Ŷ82F
Ɣ79F Ɣ79F Ŷ66F Ŷ66F
Ŷ56E Ŷ56E Ɣ43E Ɣ43E
Ŷ33D Ŷ33D Ɣ30D Ɣ30D
Ɣ72E Ɣ72E Ɣ49E Ɣ49E
Ɣ36G Ɣ36G Ɣ26G Ɣ26G
Ɣ49C Ɣ49C Ɣ30C Ɣ30C
Ɣ115H Ɣ115H Ŷ98H Ŷ98H
Ɣ92D Ɣ92D Ŷ79F Ŷ79F
Ɣ72E Ɣ72E Ɣ66E Ɣ66E
Ŷ56E Ŷ56E Ɣ46E Ɣ46E
Ŷ92F Ŷ92F Ɣ75E Ɣ75E
Ŷ66D Ŷ66D Ɣ39D Ɣ39D
Ŷ36C Ŷ36C Ɣ20B Ɣ20B
Ɣ49G Ɣ49G Ɣ33G Ɣ33G
Ŷ23E Ŷ23E Ɣ20E Ɣ20E
Ɣ20B Ɣ20B Ɣ10A Ɣ10A
Ɣ125H Ɣ125H Ɣ108G Ɣ108G
Ɣ131F Ɣ131F Ɣ115I Ɣ115I
Ɣ89H Ɣ89H Ɣ89H Ɣ89H
Ɣ69F Ɣ69F Ɣ52G Ɣ52G
Ɣ108J Ɣ108J Ɣ108J Ɣ108J
Ɣ98I Ɣ98I Ɣ98I Ɣ98I
Ɣ98H Ɣ98H Ɣ89H Ɣ89H
Ɣ89F Ɣ89F Ɣ79F Ɣ79F
Ɣ98J Ɣ98J
Ɣ92H Ɣ92H
Ɣ46F Ɣ46F
Ɣ20C Ɣ20C Ɣ10B Ɣ10B
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
2A R10P
R18P
R15P R10PM R08 R10H
R18H R18S
R10S L10
L18
95 97-99 100 102 103-104 105-106 106-107
Ŷ115H Ŷ115H Ŷ115H Ŷ115H Ɣ108I Ɣ82F Ŷ115H
Ŷ98H Ŷ98H Ŷ98H Ŷ98H Ɣ92I Ɣ66F Ŷ98H
Ŷ82F Ŷ82F Ŷ82F Ŷ82F Ŷ82F
Ŷ66F Ŷ66F Ŷ66F Ŷ66F Ŷ66F
Ɣ43E Ɣ43E Ɣ43E Ɣ43E Ɣ43E
Ɣ30D Ɣ30D Ɣ30D Ɣ30D Ɣ30D
Ɣ49E Ɣ49E Ɣ49E Ɣ49E Ɣ49E
Ɣ26G Ɣ26G Ɣ26G Ɣ26G Ɣ26G
Ɣ30C Ɣ30C Ɣ30C Ɣ30C Ɣ30C
Ŷ98H Ŷ98H Ŷ98H Ŷ98H Ɣ82F Ɣ66E Ŷ98H
Ŷ79F Ŷ79F Ŷ79F Ŷ79F Ɣ66D Ɣ49C Ŷ79F
Ɣ66E Ɣ66E Ɣ66E Ɣ66E Ɣ52C Ɣ33B Ɣ66E
Ɣ46E Ɣ46E Ɣ46E Ɣ46E Ɣ33C Ɣ20B Ɣ46E
Ɣ75E Ɣ75E Ɣ75E Ɣ75E Ɣ49C Ɣ75E
Ɣ39D Ɣ39D Ɣ39D Ɣ39D Ɣ39D
Ɣ20B Ɣ20B Ɣ20B Ɣ20B Ɣ20B
Ɣ33G Ɣ33G Ɣ33G Ɣ33G Ɣ23E Ɣ33G
Ɣ20E Ɣ20E Ɣ20E Ɣ20E Ɣ20E
Ɣ10A Ɣ10A Ɣ10A Ɣ10A Ɣ10A
Ɣ108G Ɣ108G Ɣ108G Ɣ108G Ŷ115H Ɣ108G
Ɣ115I Ɣ115I Ɣ115I Ɣ115I Ɣ118G Ŷ131I Ɣ115I
Ɣ89H Ɣ89H Ɣ89H Ɣ89H Ŷ115G Ɣ89H
Ɣ52G Ɣ52G Ɣ52G Ɣ52G Ɣ49E Ɣ52G
Ɣ108J Ɣ108J Ɣ108J Ɣ108J Ŷ148J Ɣ98I Ɣ108J
Ɣ98I Ɣ98I Ɣ98I Ɣ98I Ŷ115J Ɣ89H Ɣ98I
Ɣ89H Ɣ89H Ɣ89H Ɣ89H Ŷ98G Ɣ79G Ɣ89H
Ɣ79F Ɣ79F Ɣ79F Ɣ79F Ŷ95G Ɣ66E Ɣ79F
Ɣ98J Ɣ98J Ɣ98J Ɣ98J Ŷ138J Ɣ98J
Ɣ92H Ɣ92H Ɣ92H Ɣ92H Ɣ131I Ɣ115F Ɣ92H
Ɣ46F Ɣ46F Ɣ46F Ɣ46F Ɣ66G Ɣ66D Ɣ46F
Ɣ10B Ɣ10B Ɣ10B Ɣ10B Ɣ10B
Surface Feet per Minute (SFM)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
58 www.precisiondormer.com
A553
Ŷ
Ɣ
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm l3
mm
d2
Øh6
mm Stock #
EDP #
or
e-Code
5.00 0.1968 36 79 36 6 0391204 A5535.0
5.10 0.2007 37 79 36 6 0391211 A5535.1
5.20 0.2047 38 79 36 6 0391228 A5535.2
5.30 0.2086 38 79 36 6 0391235 A5535.3
5.50 0.2165 40 79 36 6 0391242 A5535.5
5.60 0.2204 41 79 36 6 0391259 A5535.6
5.80 0.2283 42 79 36 6 0391266 A5535.8
5.90 0.2322 43 79 36 6 0391273 A5535.9
6.00 0.2362 43 79 36 6 0391280 A5536.0
6.30 0.2480 46 87 36 8 0391297 A5536.3
6.50 0.2559 47 87 36 8 0391303 A5536.5
6.60 0.2598 48 87 36 8 0391310 A5536.6
6.80 0.2677 48 87 36 8 0391327 A5536.8
6.90 0.2716 48 87 36 8 0391334 A5536.9
7.00 0.2755 48 87 36 8 0391341 A5537.0
7.30 0.2874 53 94 36 8 0391358 A5537.3
7.40 0.2913 54 94 36 8 0391365 A5537.4
7.50 0.2952 54 94 36 8 0391372 A5537.5
7.80 0.3070 56 94 36 8 0391389 A5537.8
7.90 0.3110 57 94 36 8 0391396 A5537.9
8.00 0.3149 58 94 36 8 0391402 A5538.0
8.50 0.3346 75 130 40 10 0391419 A5538.5
8.70 0.3425 75 130 40 10 0391426 A5538.7
9.00 0.3543 75 130 40 10 0391433 A5539.0
9.40 0.3700 75 130 40 10 0391440 A5539.4
9.50 0.3740 75 130 40 10 0391457 A5539.5
10.00 0.3937 75 130 40 10 0390795 A55310.0
10.20 0.4015 87 150 45 12 0390801 A55310.2
10.30 0.4055 87 150 45 12 0390818 A55310.3
10.50 0.4133 87 150 45 12 0390825 A55310.5
10.80 0.4251 94 150 45 12 0390832 A55310.8
11.00 0.4330 94 150 45 12 0390849 A55311.0
11.30 0.4448 94 150 45 12 0390856 A55311.3
11.50 0.4527 94 150 45 12 0390863 A55311.5
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm l3
mm
d2
Øh6
mm Stock #
EDP #
or
e-Code
12.00 0.4724 94 150 45 12 0390870 A55312.0
12.50 0.4921 101 160 45 14 0390887 A55312.5
13.00 0.5118 101 160 45 14 0390894 A55313.0
13.10 0.5157 101 160 45 14 0390900 A55313.1
13.25 0.5216 101 160 45 14 0390917 A55313.25
13.50 0.5314 101 160 45 14 0390924 A55313.5
13.75 0.5413 101 160 45 14 0390931 A55313.75
14.00 0.5511 101 160 45 14 0390948 A55314.0
14.25 0.5610 108 170 48 16 0390955 A55314.25
14.50 0.5708 108 170 48 16 0390962 A55314.5
14.75 0.5807 108 170 48 16 0390979 A55314.75
15.00 0.5905 108 170 48 16 0390986 A55315.0
15.10 0.5944 108 170 48 16 0390993 A55315.1
15.25 0.6003 108 170 48 16 0391006 A55315.25
15.50 0.6102 108 170 48 16 0391013 A55315.5
15.75 0.6200 108 170 48 16 0391020 A55315.75
16.00 0.6299 108 170 48 16 0391037 A55316.0
16.25 0.6397 125 190 48 18 0391044 A55316.25
16.50 0.6496 125 190 48 18 0391051 A55316.5
16.75 0.6594 125 190 48 18 0391068 A55316.75
17.00 0.6692 125 190 48 18 0391075 A55317.0
17.25 0.6791 130 190 48 18 0391082 A55317.25
17.50 0.6889 130 190 48 18 0391099 A55317.5
17.75 0.6988 130 190 48 18 0391105 A55317.75
18.00 0.7086 130 190 48 18 0391112 A55318.0
18.25 0.7185 135 200 50 20 0391129 A55318.25
18.50 0.7283 135 200 50 20 0391136 A55318.5
18.75 0.7381 135 200 50 20 0391143 A55318.75
19.00 0.7480 135 200 50 20 0391150 A55319.0
19.25 0.7578 140 200 50 20 0391167 A55319.25
19.50 0.7677 140 200 50 20 0391174 A55319.5
19.75 0.7775 140 200 50 20 0391181 A55319.75
20.00 0.7874 140 200 50 20 0391198 A55320.0
Ɣ ADX Drill Ɣ Foret ADX ƔBroca ADX
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 59
www.precisiondormer.com
A554
Ŷ
Ɣ
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm l3
mm
d2
Øh6
mm Stock #
EDP #
or
e-Code
5.00 0.1968 36 79 36 6 0392072 A5545.0
5.10 0.2007 37 79 36 6 0392089 A5545.1
5.20 0.2047 38 79 36 6 0392096 A5545.2
5.30 0.2086 38 79 36 6 0392102 A5545.3
5.50 0.2165 40 79 36 6 0392119 A5545.5
5.60 0.2204 41 79 36 6 0392126 A5545.6
5.80 0.2283 42 79 36 6 0392133 A5545.8
5.90 0.2322 43 79 36 6 0392140 A5545.9
6.00 0.2362 43 79 36 6 0392157 A5546.0
6.30 0.2480 46 87 36 8 0392164 A5546.3
6.50 0.2559 47 87 36 8 0392171 A5546.5
6.60 0.2598 48 87 36 8 0392188 A5546.6
6.80 0.2677 48 87 36 8 0392195 A5546.8
6.90 0.2716 48 87 36 8 0392201 A5546.9
7.00 0.2755 48 87 36 8 0392218 A5547.0
7.30 0.2874 53 94 36 8 0392225 A5547.3
7.40 0.2913 54 94 36 8 0392232 A5547.4
7.50 0.2952 54 94 36 8 0392249 A5547.5
7.80 0.3070 56 94 36 8 0392256 A5547.8
7.90 0.3110 57 94 36 8 0392263 A5547.9
8.00 0.3149 58 94 36 8 0392270 A5548.0
8.50 0.3346 75 130 40 10 0392287 A5548.5
8.70 0.3425 75 130 40 10 0392294 A5548.7
9.00 0.3543 75 130 40 10 0392300 A5549.0
9.40 0.3700 75 130 40 10 0392317 A5549.4
9.50 0.3740 75 130 40 10 0392324 A5549.5
10.00 0.3937 75 130 40 10 0391464 A55410.0
10.20 0.4015 87 150 45 12 0391471 A55410.2
10.30 0.4055 87 150 45 12 0391488 A55410.3
10.50 0.4133 87 150 45 12 0391495 A55410.5
10.80 0.4251 94 150 45 12 0391501 A55410.8
11.00 0.4330 94 150 45 12 0391518 A55411.0
11.30 0.4448 94 150 45 12 0391525 A55411.3
11.50 0.4527 94 150 45 12 0391532 A55411.5
11.80 0.4646 94 150 45 12 0400234 A55411.8
12.00 0.4724 94 150 45 12 0391549 A55412.0
12.50 0.4921 101 160 45 14 0391556 A55412.5
13.00 0.5118 101 160 45 14 0391563 A55413.0
13.10 0.5157 101 160 45 14 0391570 A55413.1
13.25 0.5216 101 160 45 14 0391587 A55413.25
13.50 0.5314 101 160 45 14 0391594 A55413.5
13.75 0.5413 101 160 45 14 0391600 A55413.75
14.00 0.5511 101 160 45 14 0391617 A55414.0
14.25 0.5610 108 170 48 16 0391624 A55414.25
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm l3
mm
d2
Øh6
mm Stock #
EDP #
or
e-Code
14.50 0.5708 108 170 48 16 0391631 A55414.5
14.75 0.5807 108 170 48 16 0391648 A55414.75
15.00 0.5905 108 170 48 16 0391655 A55415.0
15.10 0.5944 108 170 48 16 0391662 A55415.1
15.25 0.6003 108 170 48 16 0391679 A55415.25
15.50 0.6102 108 170 48 16 0391686 A55415.5
15.75 0.6200 108 170 48 16 0391693 A55415.75
16.00 0.6299 108 170 48 16 0391709 A55416.0
16.25 0.6397 125 190 48 18 0391716 A55416.25
16.50 0.6496 125 190 48 18 0391723 A55416.5
16.75 0.6594 125 190 48 18 0391730 A55416.75
17.00 0.6692 125 190 48 18 0391747 A55417.0
17.25 0.6791 130 190 48 18 0391754 A55417.25
17.50 0.6889 130 190 48 18 0391761 A55417.5
17.75 0.6988 130 190 48 18 0391778 A55417.75
18.00 0.7086 130 190 48 18 0391785 A55418.0
18.25 0.7185 135 200 50 20 0391792 A55418.25
18.50 0.7283 135 200 50 20 0391808 A55418.5
18.75 0.7381 135 200 50 20 0391815 A55418.75
19.00 0.7480 135 200 50 20 0391822 A55419.0
19.25 0.7578 140 200 50 20 0391839 A55419.25
19.50 0.7677 140 200 50 20 0391846 A55419.5
19.75 0.7775 140 200 50 20 0391853 A55419.75
20.00 0.7874 140 200 50 20 0391860 A55420.0
20.50 0.8070 141 219 56 25 0391877 A55420.5
20.75 0.8169 141 219 56 25 0391884 A55420.75
21.00 0.8267 141 219 56 25 0391891 A55421.0
21.50 0.8464 148 226 56 25 0391907 A55421.5
22.00 0.8661 148 226 56 25 0391914 A55422.0
22.25 0.8759 155 233 56 25 0391921 A55422.25
22.50 0.8858 155 233 56 25 0391938 A55422.5
23.00 0.9055 155 233 56 25 0391945 A55423.0
23.25 0.9153 162 240 56 25 0391952 A55423.25
23.50 0.9251 162 240 56 25 0391969 A55423.5
24.00 0.9448 162 240 56 25 0391976 A55424.0
24.50 0.9645 168 240 56 25 0391983 A55424.5
25.00 0.9842 168 246 56 25 0391990 A55425.0
26.00 1.0236 175 257 60 32 0392003 A55426.0
26.50 1.0433 182 264 60 32 0392010 A55426.5
27.00 1.0629 182 264 60 32 0392027 A55427.0
28.00 1.1023 189 271 60 32 0392034 A55428.0
29.00 1.1417 195 277 60 32 0392041 A55429.0
29.50 1.1614 202 284 60 32 0392058 A55429.5
30.00 1.1811 202 284 60 32 0392065 A55430.0
Ɣ ADX Drill Ɣ Foret ADX ƔBroca ADX
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
60 www.precisiondormer.com
Ɣ Foret court ADX
A510
Ŷ
Ɣ
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
3.00 0.1181 33 61 0036495 A5103.0
3.10 0.1220 36 65 0036501 A5103.1
1/8 3.18 0.1250 36 65 0168974 A5101/8
3.20 0.1259 36 65 0036518 A5103.2
3.30 0.1299 36 65 0036525 A5103.3
3.40 0.1338 39 70 0036532 A5103.4
3.50 0.1377 39 70 0036549 A5103.5
9/64 3.57 0.1405 39 70 0168981 A5109/64
3.60 0.1417 39 70 0036556 A5103.6
3.70 0.1456 39 70 0036563 A5103.7
3.80 0.1496 43 75 0036570 A5103.8
3.90 0.1535 43 75 0036587 A5103.9
5/32 3.97 0.1562 43 75 0168998 A5105/32
4.00 0.1574 43 75 0036594 A5104.0
4.10 0.1614 43 75 0036600 A5104.1
4.20 0.1653 43 75 0036617 A5104.2
4.30 0.1692 47 80 0036624 A5104.3
11/64 4.37 0.1720 47 80 0169001 A51011/64
4.40 0.1732 47 80 0036631 A5104.4
4.50 0.1771 47 80 0036648 A5104.5
4.60 0.1811 47 80 0036655 A5104.6
4.70 0.1850 47 80 0036662 A5104.7
3/16 4.76 0.1874 52 86 0169018 A5103/16
4.80 0.1889 52 86 0036679 A5104.8
4.90 0.1929 52 86 0036686 A5104.9
5.00 0.1968 52 86 0036693 A5105.0
5.10 0.2007 52 86 0036709 A5105.1
13/64 5.16 0.2031 52 86 0169025 A51013/64
5.20 0.2047 52 86 0036716 A5105.2
5.30 0.2086 52 86 0036723 A5105.3
5.40 0.2125 57 93 0036730 A5105.4
5.50 0.2165 57 93 0036747 A5105.5
7/32 5.56 0.2188 57 93 0169032 A5107/32
5.60 0.2204 57 93 0036754 A5105.6
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
5.70 0.2244 57 93 0036761 A5105.7
5.80 0.2283 57 93 0036778 A5105.8
5.90 0.2322 57 93 0036785 A5105.9
15/64 5.95 0.2342 57 93 0169049 A51015/64
6.00 0.2362 57 93 0036792 A5106.0
6.10 0.2401 63 101 0036808 A5106.1
6.20 0.2440 63 101 0036815 A5106.2
6.30 0.2480 63 101 0036822 A5106.3
1/4 6.35 0.2500 63 101 0169056 A5101/4
6.40 0.2519 63 101 0036839 A5106.4
6.50 0.2559 63 101 0036846 A5106.5
6.60 0.2598 63 101 0036853 A5106.6
6.70 0.2637 63 101 0036860 A5106.7
17/64 6.75 0.2657 69 109 0169063 A51017/64
6.80 0.2677 69 109 0036877 A5106.8
6.90 0.2716 69 109 0036884 A5106.9
7.00 0.2755 69 109 0036891 A5107.0
7.10 0.2795 69 109 0036907 A5107.1
9/32 7.14 0.2811 69 109 0169070 A5109/32
7.20 0.2834 69 109 0036914 A5107.2
7.30 0.2874 69 109 0036921 A5107.3
7.40 0.2913 69 109 0036938 A5107.4
7.50 0.2952 69 109 0036945 A5107.5
19/64 7.54 0.2968 75 117 0169087 A51019/64
7.60 0.2992 75 117 0036952 A5107.6
7.70 0.3031 75 117 0036969 A5107.7
7.80 0.3070 75 117 0036976 A5107.8
7.90 0.3110 75 117 0036983 A5107.9
5/16 7.94 0.3125 75 117 0169094 A5105/16
8.00 0.3149 75 117 0036990 A5108.0
8.10 0.3188 75 117 0037003 A5108.1
8.20 0.3228 75 117 0037010 A5108.2
8.30 0.3267 75 117 0037027 A5108.3
21/64 8.33 0.3279 75 117 0169100 A51021/64
8.40 0.3307 75 117 0037034 A5108.4
8.50 0.3346 75 117 0037041 A5108.5
8.60 0.3385 81 125 0037058 A5108.6
8.70 0.3425 81 125 0037065 A5108.7
Ɣ ADX Jobber Drill ƔBroca ADX , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 61
www.precisiondormer.com
A510
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm
1
l
mm Stock #
EDP #
or
e-Code
11/32 8.73 0.3437 81 125 0169117 A51011/32
8.80 0.3464 81 125 0037072 A5108.8
8.90 0.3503 81 125 0037089 A5108.9
9.00 0.3543 81 125 0037096 A5109.0
9.10 0.3582 81 125 0037102 A5109.1
23/64 9.13 0.3594 81 125 0169124 A51023/64
9.20 0.3622 81 125 0037119 A5109.2
9.30 0.3661 81 125 0037126 A5109.3
9.40 0.3700 81 125 0037133 A5109.4
9.50 0.3740 81 125 0037140 A5109.5
3/8 9.53 0.3750 87 133 0169131 A5103/8
9.60 0.3779 87 133 0037157 A5109.6
9.70 0.3818 87 133 0037164 A5109.7
9.80 0.3858 87 133 0037171 A5109.8
9.90 0.3897 87 133 0037188 A5109.9
25/64 9.92 0.3905 87 133 0169148 A51025/64
10.00 0.3937 87 133 0036174 A51010.0
10.10 0.3976 87 133 0036181 A51010.1
10.20 0.4015 87 133 0036198 A51010.2
10.30 0.4055 87 133 0036204 A51010.3
13/32 10.32 0.4062 87 133 0169155 A51013/32
10.40 0.4094 87 133 0036211 A51010.4
10.50 0.4133 87 133 0036228 A51010.5
10.60 0.4173 87 133 0036235 A51010.6
10.70 0.4212 94 142 0036242 A51010.7
27/64 10.72 0.4220 94 142 0169162 A51027/64
10.80 0.4251 94 142 0036259 A51010.8
10.90 0.4291 94 142 0036266 A51010.9
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm
1
l
mm Stock #
EDP #
or
e-Code
11.00 0.4330 94 142 0036273 A51011.0
11.10 0.4370 94 142 0036280 A51011.1
7/16 11.11 0.4374 94 142 0169179 A5107/16
11.20 0.4409 94 142 0036297 A51011.2
11.30 0.4448 94 142 0036303 A51011.3
11.40 0.4488 94 142 0036310 A51011.4
11.50 0.4527 94 142 0036327 A51011.5
29/64 11.51 0.4531 94 142 0169186 A51029/64
11.60 0.4566 94 142 0036334 A51011.6
11.70 0.4606 94 142 0036341 A51011.7
11.80 0.4645 94 142 0036358 A51011.8
11.90 0.4685 101 151 0036365 A51011.9
15/32 11.91 0.4688 101 151 0169193 A51015/32
12.00 0.4724 101 151 0036372 A51012.0
12.10 0.4763 101 151 0036389 A51012.1
12.20 0.4803 101 151 0036396 A51012.2
12.30 0.4842 101 151 0036402 A51012.3
31/64 12.30 0.4842 101 151 0169209 A51031/64
12.40 0.4881 101 151 0036419 A51012.4
12.50 0.4921 101 151 0036426 A51012.5
12.60 0.4960 101 151 0036433 A51012.6
12.70 0.5000 101 151 0036440 A51012.7
1/2 12.70 0.5000 101 151 0169216 A5101/2
12.80 0.5039 101 151 0036457 A51012.8
12.90 0.5078 101 151 0036464 A51012.9
13.00 0.5118 101 151 0036471 A51013.0
14.00 0.5511 108 160 0036488 A51014.0
Ɣ Foret court ADXƔ ADX Jobber Drill ƔBroca ADX , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
62 www.precisiondormer.com
A577
Ŷ
Ɣ
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
1.50 0.0590 18 40 0279502 A5771.5
2.00 0.0787 24 49 0279519 A5772.0
2.50 0.0984 30 57 0125205 A5772.5
2.60 0.1023 30 57 0125199 A5772.6
3.00 0.1181 33 61 0125212 A5773.0
3.10 0.1220 36 65 0586471 A5773.1
3.20 0.1259 36 65 0586488 A5773.2
3.30 0.1299 36 65 0125229 A5773.3
3.40 0.1338 39 70 0125236 A5773.4
3.50 0.1377 39 70 0125243 A5773.5
3.60 0.1417 39 70 0586495 A5773.6
3.70 0.1456 39 70 0586501 A5773.7
3.80 0.1496 43 75 0586518 A5773.8
3.90 0.1535 43 75 0586525 A5773.9
4.00 0.1574 43 75 0125250 A5774.0
4.10 0.1614 43 75 0125267 A5774.1
4.20 0.1653 43 75 0125274 A5774.2
4.30 0.1692 47 80 0125281 A5774.3
4.40 0.1732 47 80 0586532 A5774.4
4.50 0.1771 47 80 0125298 A5774.5
4.60 0.1811 47 80 0586549 A5774.6
4.70 0.1850 47 80 0586556 A5774.7
4.80 0.1889 52 86 0279526 A5774.8
4.90 0.1929 52 86 0125304 A5774.9
5.00 0.1968 52 86 0125311 A5775.0
5.10 0.2007 52 86 0125328 A5775.1
5.20 0.2047 52 86 0279533 A5775.2
5.30 0.2086 52 86 0586563 A5775.3
5.40 0.2125 57 93 0586570 A5775.4
5.50 0.2165 57 93 0125335 A5775.5
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
5.60 0.2204 57 93 0586587 A5775.6
5.70 0.2244 57 93 0279540 A5775.7
5.80 0.2283 57 93 0586594 A5775.8
5.90 0.2322 57 93 0586600 A5775.9
6.00 0.2362 57 93 0125342 A5776.0
6.10 0.2401 63 101 0279557 A5776.1
6.20 0.2440 63 101 0586617 A5776.2
6.30 0.2480 63 101 0586624 A5776.3
6.40 0.2519 63 101 0586631 A5776.4
6.50 0.2559 63 101 0125359 A5776.5
6.60 0.2598 63 101 0586648 A5776.6
6.70 0.2637 63 101 0586655 A5776.7
6.80 0.2677 69 109 0125366 A5776.8
6.90 0.2716 69 109 0125373 A5776.9
7.00 0.2755 69 109 0125380 A5777.0
7.10 0.2795 69 109 0586662 A5777.1
7.20 0.2834 69 109 0586679 A5777.2
7.30 0.2874 69 109 0586686 A5777.3
7.40 0.2913 69 109 0586693 A5777.4
7.50 0.2952 69 109 0125397 A5777.5
7.60 0.2992 75 117 0586709 A5777.6
7.70 0.3031 75 117 0586716 A5777.7
7.80 0.3070 75 117 0586723 A5777.8
7.90 0.3110 75 117 0586730 A5777.9
8.00 0.3149 75 117 0125403 A5778.0
8.10 0.3188 75 117 0586747 A5778.1
8.20 0.3228 75 117 0586754 A5778.2
8.30 0.3267 75 117 0279564 A5778.3
8.40 0.3307 75 117 0586761 A5778.4
8.50 0.3346 75 117 0125410 A5778.5
Ɣ Foret PFX courtƔPFX Jobber Drill ƔBroca PFX Serie Corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 63
www.precisiondormer.com
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
8.60 0.3385 81 125 0125427 A5778.6
8.70 0.3425 81 125 0125434 A5778.7
8.80 0.3464 81 125 0586778 A5778.8
8.90 0.3503 81 125 0586785 A5778.9
9.00 0.3543 81 125 0125441 A5779.0
9.10 0.3582 81 125 0586792 A5779.1
9.20 0.3622 81 125 0586808 A5779.2
9.30 0.3661 81 125 0586815 A5779.3
9.40 0.3700 81 125 0586822 A5779.4
9.50 0.3740 81 125 0125458 A5779.5
9.60 0.3779 87 133 0586839 A5779.6
9.70 0.3818 87 133 0586846 A5779.7
9.80 0.3858 87 133 0586853 A5779.8
9.90 0.3897 87 133 0586860 A5779.9
10.00 0.3937 87 133 0125106 A57710.0
10.20 0.4015 87 133 0125113 A57710.2
10.30 0.4055 87 133 0125120 A57710.3
10.40 0.4094 87 133 0125137 A57710.4
A577
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
10.50 0.4133 87 133 0125144 A57710.5
10.80 0.4251 914 142 0586372 A57710.8
11.00 0.4330 97 142 0125151 A57711.0 1)
11.20 0.4409 97 142 0586389 A57711.2 1)
11.50 0.4527 97 142 0125168 A57711.5 1)
11.80 0.4645 97 142 0586396 A57711.8 1)
12.00 0.4724 106 151 0125175 A57712.0 1)
12.20 0.4803 106 151 0125182 A57712.2 1)
12.50 0.4921 106 151 0586402 A57712.5 1)
12.80 0.5039 106 151 0586419 A57712.8 1)
13.00 0.5118 106 151 0139615 A57713.0 1)
13.50 0.5314 115 160 0586426 A57713.5 1)
14.00 0.5511 115 160 0139622 A57714.0 1)
14.50 0.5708 121 169 0586433 A57714.5 1)
15.00 0.5905 121 169 0586440 A57715.0 1)
15.50 0.6102 130 178 0586457 A57715.5 1)
16.00 0.6299 130 178 0586464 A57716.0 1)
Ɣ Foret PFX courtƔPFX Jobber Drill ƔBroca PFX Serie Corta
1) Flute lengths longer than standard
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
64 www.precisiondormer.com
Ɣ Foret PFX court
A907
Ŷ
Ɣ
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
1.00 0.0393 12 34 0144831 A9071.0
1.10 0.0433 14 36 0144848 A9071.1
1.20 0.0472 16 38 0144855 A9071.2
1.30 0.0511 16 38 0144862 A9071.3
1.40 0.0551 18 40 0144879 A9071.4
1.50 0.0590 18 40 0144886 A9071.5
1/16 1.59 0.0625 20 43 0170830 A9071/16
1.60 0.0629 20 43 0144893 A9071.6
1.70 0.0669 20 43 0144909 A9071.7
1.80 0.0708 22 46 0144916 A9071.8
1.90 0.0748 22 46 0144923 A9071.9
5/64 1.98 0.0779 24 49 0170847 A9075/64
2.00 0.0787 24 49 0144930 A9072.0
2.10 0.0826 24 49 0144947 A9072.1
2.20 0.0866 27 53 0144954 A9072.2
2.30 0.0905 27 53 0144961 A9072.3
3/32 2.38 0.0937 30 57 0170854 A9073/32
2.40 0.0944 30 57 0144978 A9072.4
2.50 0.0984 30 57 0144985 A9072.5
2.60 0.1023 30 57 0144992 A9072.6
2.70 0.1062 33 61 0145005 A9072.7
7/64 2.78 0.1094 33 61 0170861 A9077/64
2.80 0.1102 33 61 0145012 A9072.8
2.90 0.1141 33 61 0145029 A9072.9
3.00 0.1181 33 61 0145036 A9073.0
3.10 0.1220 36 65 0145043 A9073.1
1/8 3.18 0.1251 36 65 0170878 A9071/8
3.20 0.1259 36 65 0145050 A9073.2
3.30 0.1299 36 65 0145067 A9073.3
3.40 0.1338 39 70 0145074 A9073.4
3.50 0.1377 39 70 0145081 A9073.5
9/64 3.57 0.1405 39 70 0170885 A9079/64
3.60 0.1417 39 70 0145098 A9073.6
3.70 0.1456 39 70 0145104 A9073.7
3.80 0.1496 43 75 0145111 A9073.8
3.90 0.1535 43 75 0145128 A9073.9
5/32 3.97 0.1562 43 75 0170892 A9075/32
4.00 0.1574 43 75 0145135 A9074.0
4.10 0.1614 43 75 0145142 A9074.1
4.20 0.1653 43 75 0145159 A9074.2
4.30 0.1692 47 80 0145166 A9074.3
11/64 4.37 0.1720 47 80 0170908 A90711/64
4.40 0.1732 47 80 0145173 A9074.4
4.50 0.1771 47 80 0145180 A9074.5
4.60 0.1811 47 80 0145197 A9074.6
4.70 0.1850 47 80 0145203 A9074.7
3/16 4.76 0.1874 52 86 0170915 A9073/16
4.80 0.1889 52 86 0145210 A9074.8
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
4.90 0.1929 52 86 0145227 A9074.9
5.00 0.1968 52 86 0145234 A9075.0
5.10 0.2007 52 86 0145241 A9075.1
N7 5.11 0.2010 52 86 0588116 A907N7
13/64 5.16 0.2031 52 86 0170922 A90713/64
5.20 0.2047 52 86 0145258 A9075.2
5.30 0.2086 52 86 0145265 A9075.3
5.40 0.2125 57 93 0145272 A9075.4
5.50 0.2165 57 93 0145289 A9075.5
7/32 5.56 0.2188 57 93 0170939 A9077/32
5.60 0.2204 57 93 0145296 A9075.6
5.70 0.2244 57 93 0145302 A9075.7
5.80 0.2283 57 93 0145319 A9075.8
5.90 0.2322 57 93 0145326 A9075.9
15/64 5.95 0.2342 57 93 0170946 A90715/64
6.00 0.2362 57 93 0145333 A9076.0
6.10 0.2401 63 101 0145340 A9076.1
6.20 0.2440 63 101 0145357 A9076.2
6.30 0.2480 63 101 0145364 A9076.3
1/4 6.35 0.2500 63 101 0170953 A9071/4
6.40 0.2519 63 101 0145371 A9076.4
6.50 0.2559 63 101 0145388 A9076.5
F6.53 0.2570 63 101 0588093 A907F
6.60 0.2598 63 101 0145395 A9076.6
ƔPFX Jobber Drill ƔBroca PFX Serie Corta
6.70 0.2637 63 101 0145401 A9076.7
17/64 6.75 0.2657 69 109 0170960 A90717/64
6.80 0.2677 69 109 0145418 A9076.8
6.90 0.2716 69 109 0145425 A9076.9
I6.91 0.2720 69 109 0588109 A907I
7.00 0.2755 69 109 0145432 A9077.0
7.10 0.2795 69 109 0145449 A9077.1
9/32 7.14 0.2811 69 109 0170977 A9079/32
7.20 0.2834 69 109 0145456 A9077.2
7.30 0.2874 69 109 0145463 A9077.3
7.40 0.2913 69 109 0145470 A9077.4
7.50 0.2952 69 109 0145487 A9077.5
19/64 7.54 0.2968 75 117 0170984 A90719/64
7.60 0.2992 75 117 0145494 A9077.6
7.70 0.3031 75 117 0145500 A9077.7
7.80 0.3070 75 117 0145517 A9077.8
7.90 0.3110 75 117 0145524 A9077.9
5/16 7.94 0.3125 75 117 0170991 A9075/16
8.00 0.3149 75 117 0145531 A9078.0
8.10 0.3188 75 117 0145548 A9078.1
8.20 0.3228 75 117 0145555 A9078.2
8.30 0.3267 75 117 0145562 A9078.3
21/64 8.33 0.3279 75 117 0171004 A90721/64
8.40 0.3307 75 117 0145579 A9078.4
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 65
www.precisiondormer.com
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
A907 - A141
A141
Ŷ
Ɣ
d1Ø
Inch d1Ø
mm d1dec.
Inch l2
Inch l1
Inch Stock # EDP #
or e-Code
1/16 1.588 0.0625 25/32 1.11/16 0423264 A1411/16
5/64 1.984 0.0781 15/16 1.15/16 0423486 A1415/64
3/32 2.381 0.0938 1.3/16 2.1/4 0423431 A1413/32
7/64 2.778 0.1094 1.5/16 2.13/32 0423516 A1417/64
1/8 3.175 0.1250 1.7/16 2.9/16 0423295 A1411/8
9/64 3.572 0.1406 1.17/32 2.3/4 0423530 A1419/64
5/32 3.969 0.1562 1.11/16 2.15/16 0423479 A1415/32
11/64 4.366 0.1719 1.27/32 3.5/32 0423318 A14111/64
3/16 4.763 0.1875 2.1/16 3.3/8 0423424 A1413/16
13/64 5.159 0.2031 2.1/16 3.3/8 0423332 A14113/64
7/32 5.556 0.2188 2.1/4 3.21/32 0423509 A1417/32
15/64 5.953 0.2344 2.1/4 3.21/32 0423547 A14115/64
1/4 6.350 0.2500 2.1/2 3.31/32 0423288 A1411/4
17/64 6.747 0.2656 2.23/32 4.9/32 0423356 A14117/64
9/32 7.144 0.2812 2.23/32 4.9/32 0423523 A1419/32
d1Ø
Inch d1Ø
mm d1dec.
Inch l2
Inch l1
Inch Stock # EDP #
or e-Code
19/64 7.541 0.2969 2.15/16 4.19/32 0423363 A14119/64
5/16 7.938 0.3125 2.15/16 4.19/32 0423462 A1415/16
21/64 8.334 0.3281 2.15/16 4.19/32 0423370 A14121/64
11/32 8.731 0.3438 3.3/16 4.29/32 0423301 A14111/32
23/64 9.128 0.3594 3.3/16 4.29/32 0423387 A14123/64
3/8 9.525 0.3750 3.7/16 5.1/4 0423448 A1413/8
25/64 9.922 0.3906 3.7/16 5.1/4 0423394 A14125/64
13/32 10.319 0.4062 3.7/16 5.1/4 0423325 A14113/32
27/64 10.716 0.4219 3.11/16 5.19/32 0423400 A14127/64
7/16 11.113 0.4375 3.11/16 5.19/32 0423493 A1417/16
29/64 11.509 0.4531 3.11/16 5.19/32 0423417 A14129/64
15/32 11.906 0.4688 3.31/32 5.15/16 0423349 A14115/32
31/64 12.303 0.4844 3.31/32 5.15/16 0423455 A14131/64
1/2 12.700 0.5000 3.31/32 5.15/16 0423271 A1411/2
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ɣ Fast spiral for stainless steel
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
Q8.43 0.3320 75 117 0588123 A907Q
8.50 0.3346 75 117 0145586 A9078.5
8.60 0.3385 81 125 0145593 A9078.6
R8.61 0.3390 75 117 0588130 A907R
8.70 0.3425 81 125 0145609 A9078.7
11/32 8.73 0.3437 81 125 0171011 A90711/32
8.80 0.3464 81 125 0145616 A9078.8
8.90 0.3503 81 125 0145623 A9078.9
9.00 0.3543 81 125 0145630 A9079.0
9.10 0.3582 81 125 0145647 A9079.1
23/64 9.13 0.3594 81 125 0171028 A90723/64
9.20 0.3622 81 125 0145654 A9079.2
9.30 0.3661 81 125 0145661 A9079.3
9.40 0.3700 81 125 0145678 A9079.4
9.50 0.3740 81 125 0145685 A9079.5
3/8 9.53 0.3751 87 133 0171035 A9073/8
9.60 0.3779 87 133 0145692 A9079.6
9.70 0.3818 87 133 0145708 A9079.7
27/64 10.72 0.4220 97 142 0171066 A90727/64 1)
10.80 0.4251 97 142 0145784 A90710.8 1)
11.00 0.4330 97 142 0145791 A90711.0 1)
7/16 11.11 0.4374 97 142 0171073 A9077/16 1)
11.20 0.4409 97 142 0145807 A90711.2 1)
11.50 0.4527 97 142 0145814 A90711.5 1)
29/64 11.51 0.4531 97 142 0171080 A90729/64 1)
11.80 0.4645 97 142 0145821 A90711.8 1)
15/32 11.91 0.4688 106 151 0171097 A90715/32 1)
12.00 0.4724 106 151 0145838 A90712.0 1)
12.20 0.4803 106 151 0145845 A90712.2 1)
31/64 12.30 0.4842 106 151 0171103 A90731/64 1)
12.50 0.4921 106 151 0145852 A90712.5 1)
1/2 12.70 0.5000 106 151 0171110 A9071/2 1)
12.80 0.5039 106 151 0145869 A90712.8 1)
13.00 0.5118 106 151 0145876 A90713.0 1)
13.50 0.5314 115 160 0302897 A90713.5 1)
14.00 0.5511 115 160 0213896 A90714.0 1)
14.50 0.5708 121 169 0302903 A90714.5 1)
15.00 0.5905 121 169 0302910 A90715.0 1)
15.50 0.6102 130 178 0302927 A90715.5 1)
16.00 0.6299 130 178 0302934 A90716.0 1)
17.00 0.6693 125 184 0588147 A90717.0 1)
17.50 0.6890 130 191 0588154 A90717.5 1)
18.00 0.7087 130 198 0588161 A90718.0 1)2)
19.00 0.7480 135 205 0588178 A90719.0 1)2)
9.80 0.3858 87 133 0145715 A9079.8
9.90 0.3897 87 133 0145722 A9079.9
25/64 9.92 0.3905 87 133 0171042 A90725/64
10.00 0.3937 87 133 0145739 A90710.0
10.20 0.4015 87 133 0145746 A90710.2
10.30 0.4055 87 133 0145753 A90710.3
13/32 10.32 0.4062 87 133 0171059 A90713/32
10.40 0.4094 87 133 0145760 A90710.4
10.50 0.4133 87 133 0145777 A90710.5 20.00 0.7874 140 215 0588185 A90720.0 1)2)
1) Flute Lengths Longer than Standard 1) Gounjures plus longues que le standard 1) Longitudes del canal superiores a la standard
2) Overall Lengths Longer than Standard 2) Longueur totale plus longue que le standard 2) Longitudes totales superiores a la standard
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
66 www.precisiondormer.com
A012
Ŷ
Ɣ
d1
Ø
d1
Ø
mm
d1
dec.
Inch l2
Inch l1
Inch Stock #
EDP #
or
e-Code
80 0.343 0.0135 1/8 3/4 0574256 A012N80
79 0.368 0.0145 1/8 3/4 0574249 A012N79
1/64 0.397 0.0156 3/16 3/4 0573952 A0121/64
78 0.406 0.0160 3/16 7/8 0574232 A012N78
77 0.457 0.0180 3/16 7/8 0574225 A012N77
76 0.508 0.0200 3/16 7/8 0574218 A012N76
75 0.533 0.0210 1/4 1“ 0574201 A012N75
74 0.572 0.0225 1/4 1“ 0574195 A012N74
73 0.610 0.0240 5/16 1.1/8 0574188 A012N73
72 0.635 0.0250 5/16 1.1/8 0574171 A012N72
71 0.660 0.0260 3/8 1.1/4 0574164 A012N71
70 0.711 0.0280 3/8 1.1/4 0574157 A012N70
69 0.742 0.0292 1/2 1.3/8 0574140 A012N69
68 0.787 0.0310 1/2 1.3/8 0574133 A012N68
1/32 0.794 0.0312 1/2 1.3/8 0573969 A0121/32
67 0.813 0.0320 1/2 1.3/8 0574126 A012N67
66 0.838 0.0330 1/2 1.3/8 0574119 A012N66
65 0.889 0.0350 5/8 1.1/2 0574102 A012N65
64 0.914 0.0360 5/8 1.1/2 0574096 A012N64
63 0.940 0.0370 5/8 1.1/2 0574089 A012N63
62 0.965 0.0380 5/8 1.1/2 0574072 A012N62
61 0.991 0.0390 11/16 1.5/8 0574065 A012N61
60 1.016 0.0400 11/16 1.5/8 0574058 A012N60
59 1.041 0.0410 11/16 1.5/8 0574041 A012N59
58 1.067 0.0420 11/16 1.5/8 0574034 A012N58
57 1.092 0.0430 3/4 1.3/4 0574027 A012N57
56 1.181 0.0465 3/4 1.3/4 0574010 A012N56
3/64 1.191 0.0469 3/4 1.3/4 0573976 A0123/64
55 1.321 0.0520 7/8 1.7/8 0574003 A012N55
54 1.397 0.0550 7/8 1.7/8 0573990 A012N54
53 1.511 0.0595 7/8 1.7/8 0573983 A012N53
1/16 1.588 0.0625 7/8 1.7/8 0578636 A0121/16
52 1.613 0.0635 7/8 1.7/8 0578704 A012N52
51 1.702 0.0670 1“ 2“ 0578698 A012N51
d1
Ø
d1
Ø
mm
d1
dec.
Inch l2
Inch l1
Inch Stock #
EDP #
or
e-Code
50 1.778 0.0700 1“ 2“ 0578681 A012N50
49 1.854 0.0730 1“ 2“ 0578674 A012N49
48 1.930 0.0760 1“ 2“ 0578667 A012N48
5/64 1.984 0.0781 1“ 2“ 0578643 A0125/64
47 1.994 0.0785 1“ 2“ 0578650 A012N47
46 2.057 0.0810 1.1/8 2.1/8 0571705 A012N46
45 2.083 0.0820 1.1/8 2.1/8 0571699 A012N45
44 2.184 0.0860 1.1/8 2.1/8 0571682 A012N44
43 2.261 0.0890 1.1/4 2.1/4 0571675 A012N43
42 2.375 0.0935 1.1/4 2.1/4 0571668 A012N42
3/32 2.381 0.0938 1.1/4 2.1/4 0572061 A0123/32
41 2.438 0.0960 1.3/8 2.3/8 0571651 A012N41
40 2.489 0.0980 1.3/8 2.3/8 0571644 A012N40
39 2.527 0.0995 1.3/8 2.3/8 0571620 A012N39
38 2.578 0.1015 1.7/16 2.1/2 0571613 A012N38
37 2.642 0.1040 1.7/16 2.1/2 0571606 A012N37
36 2.705 0.1065 1.7/16 2.1/2 0571590 A012N36
7/64 2.778 0.1094 1.1/2 2.5/8 0572184 A0127/64
35 2.794 0.1100 1.1/2 2.5/8 0571583 A012N35
34 2.819 0.1110 1.1/2 2.5/8 0571576 A012N34
33 2.870 0.1130 1.1/2 2.5/8 0571569 A012N33
32 2.946 0.1160 1.5/8 2.3/4 0571552 A012N32
31 3.048 0.1200 1.5/8 2.3/4 0571545 A012N31
1/8 3.175 0.1250 1.5/8 2.3/4 0571897 A0121/8
30 3.264 0.1285 1.5/8 2.3/4 0571538 A012N30
29 3.454 0.1360 1.3/4 2.7/8 0571514 A012N29
28 3.569 0.1405 1.3/4 2.7/8 0571507 A012N28
9/64 3.572 0.1406 1.3/4 2.7/8 0572214 A0129/64
27 3.658 0.1440 1.7/8 3“ 0571491 A012N27
26 3.734 0.1470 1.7/8 3“ 0571484 A012N26
25 3.797 0.1495 1.7/8 3“ 0571477 A012N25
24 3.861 0.1520 2“ 3.1/8 0571460 A012N24
23 3.912 0.1540 2“ 3.1/8 0571453 A012N23
5/32 3.969 0.1562 2“ 3.1/8 0572146 A0125/32
Bright fi nish below 2.0 mm, TiN Tipped 2.0 mm and above
No split point below 2.00 mm
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 67
www.precisiondormer.com
A012
d1
Ø
d1
Ø
mm
d1
dec.
Inch l2
Inch l1
Inch Stock #
EDP #
or
e-Code
22 3.988 0.1570 2“ 3.1/8 0571446 A012N22
21 4.039 0.1590 2.1/8 3.1/4 0571439 A012N21
20 4.089 0.1610 2.1/8 3.1/4 0571422 A012N20
19 4.216 0.1660 2.1/8 3.1/4 0571408 A012N19
18 4.305 0.1695 2.1/8 3.1/4 0571392 A012N18
11/64 4.366 0.1719 2.1/8 3.1/4 0571910 A01211/64
17 4.394 0.1730 2.3/16 3.3/8 0571385 A012N17
16 4.496 0.1770 2.3/16 3.3/8 0571378 A012N16
15 4.572 0.1800 2.3/16 3.3/8 0571361 A012N15
14 4.623 0.1820 2.3/16 3.3/8 0571354 A012N14
13 4.700 0.1850 2.5/16 3.1/2 0571347 A012N13
3/16 4.762 0.1875 2.5/16 3.1/2 0572054 A0123/16
12 4.800 0.1890 2.5/16 3.1/2 0571330 A012N12
11 4.851 0.1910 2.5/16 3.1/2 0571323 A012N11
10 4.915 0.1935 2.7/16 3.5/8 0571316 A012N10
94.978 0.1960 2.7/16 3.5/8 0571750 A012N9
85.055 0.1990 2.7/16 3.5/8 0571743 A012N8
75.105 0.2010 2.7/16 3.5/8 0571736 A012N7
13/64 5.159 0.2031 2.7/16 3.5/8 0571934 A01213/64
65.182 0.2040 2.1/2 3.3/4 0571729 A012N6
55.220 0.2055 2.1/2 3.3/4 0571712 A012N5
45.309 0.2090 2.1/2 3.3/4 0571637 A012N4
35.410 0.2130 2.1/2 3.3/4 0571521 A012N3
7/32 5.556 0.2188 2.1/2 3.3/4 0572177 A0127/32
25.613 0.2210 2.5/8 3.7/8 0571415 A012N2
15.791 0.2280 2.5/8 3.7/8 0571309 A012N1
A5.944 0.2340 2.5/8 3.7/8 0571163 A012A
15/64 5.953 0.2344 2.5/8 3.7/8 0571958 A01215/64
B6.045 0.2380 2.3/4 4“ 0571170 A012B
C6.147 0.2420 2.3/4 4“ 0571187 A012C
D6.248 0.2460 2.3/4 4“ 0571194 A012D
1/4 6.350 0.2500 2.3/4 4“ 0571125 A0121/4
E6.350 0.2500 2.3/4 4“ 0571200 A012E
F6.528 0.2570 2.7/8 4.1/8 0571217 A012F
G6.629 0.2610 2.7/8 4.1/8 0571224 A012G
17/64 6.747 0.2656 2.7/8 4.1/8 0571972 A01217/64
H6.756 0.2660 2.7/8 4.1/8 0571231 A012H
I6.909 0.2720 2.7/8 4.1/8 0571248 A012I
J7.036 0.2770 2.7/8 4.1/8 0571255 A012J
K7.137 0.2810 2.15/16 4.1/4 0571262 A012K
d1
Ø
d1
Ø
mm
d1
dec.
Inch
l2
Inch
l1
Inch Stock #
EDP #
or
e-Code
U9.347 0.3680 3.5/8 5“ 0571828 A012U
3/8 9.525 0.3750 3.5/8 5“ 0572078 A0123/8
V9.576 0.3770 3.5/8 5“ 0571835 A012V
W9.804 0.3860 3.3/4 5.1/8 0571842 A012W
25/64 9.922 0.3906 3.3/4 5.1/8 0572023 A01225/64
X10.084 0.3970 3.3/4 5.1/8 0571859 A012X
Y10.262 0.4040 3.7/8 5.1/4 0571866 A012Y
13/32 10.319 0.4062 3.7/8 5.1/4 0571927 A01213/32
Z10.490 0.4130 3.7/8 5.1/4 0571873 A012Z
27/64 10.716 0.4219 3.15/16 5.3/8 0572030 A01227/64
7/16 11.112 0.4375 4.1/16 5.1/2 0572160 A0127/16
29/64 11.509 0.4531 4.3/16 5.5/8 0572047 A01229/64
15/32 11.906 0.4688 4.5/16 5.3/4 0571941 A01215/32
31/64 12.303 0.4844 4.3/8 5.7/8 0572085 A01231/64
1/2 12.700 0.5000 4.1/2 6“ 0571880 A0121/2
33/64 13.097 0.5156 4.13/16 6.5/8 0572092 A01233/64
17/32 13.494 0.5312 4.13/16 6.5/8 0571965 A01217/32
35/64 13.891 0.5469 4.13/16 6.5/8 0572108 A01235/64
9/16 14.288 0.5625 4.13/16 6.5/8 0572191 A0129/16
37/64 14.684 0.5781 4.13/16 6.5/8 0572115 A01237/64
19/32 15.081 0.5938 5.3/16 7.1/8 0571989 A01219/32
39/64 15.478 0.6094 5.3/16 7.1/8 0572122 A01239/64
5/8 15.875 0.6250 5.3/16 7.1/8 0572153 A0125/8
21/32 16.669 0.6562 5.3/16 7.1/8 0578728 A01221/32
11/16 17.462 0.6875 5.5/8 7.5/8 0578711 A01211/16
45/64 17.859 0.7031 5.5/8 7.7/8 0578742 A01245/64
23/32 18.256 0.7188 5.5/8 7.7/8 0578735 A01223/32
47/64 18.653 0.7343 6“ 8“ 0578766 A01247/64
3/4 18.653 0.7500 6“ 8“ 0578759 A0123/4
R8.611 0.3390 3.7/16 4.3/4 0571798 A012R
11/32 8.731 0.3438 3.7/16 4.3/4 0571903 A01211/32
S8.839 0.3480 3.1/2 4.7/8 0571804 A012S
T9.093 0.3580 3.1/2 4.7/8 0571811 A012T
23/64 9.128 0.3594 3.1/2 4.7/8 0572016 A01223/64
N7.671 0.3020 3.1/16 4.3/8 0571293 A012N
5/16 7.938 0.3125 3.3/16 4.1/2 0572139 A0125/16
O8.026 0.3160 3.3/16 4.1/2 0571767 A012O
P8.204 0.3230 3.5/16 4.5/8 0571774 A012P
21/64 8.334 0.3281 3.5/16 4.5/8 0572009 A01221/64
Q8.433 0.3320 3.7/16 4.3/4 0571781 A012Q
9/32 7.144 0.2812 2.15/16 4.1/4 0572207 A0129/32
L7.366 0.2900 2.15/16 4.1/4 0571279 A012L
M7.493 0.2950 3.1/16 4.3/8 0571286 A012M
19/64 7.541 0.2969 3.1/16 4.3/8 0571996 A01219/64
Bright fi nish below 2.0 mm, TiN Tipped 2.0 mm and above
No split point below 2.00 mm
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
68 www.precisiondormer.com
Ɣ Foret court
A002
Ŷ
Ɣ
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
1.00 0.0393 12 34 0376782 A0021.0
1.10 0.0433 14 36 0376799 A0021.1
1.20 0.0472 16 38 0376805 A0021.2
1.30 0.0511 16 38 0376812 A0021.3
1.40 0.0551 18 40 0376829 A0021.4
1.50 0.0590 18 40 0376836 A0021.5
1.60 0.0629 20 43 0376843 A0021.6
1.70 0.0669 20 43 0376850 A0021.7
1.80 0.0708 22 46 0376867 A0021.8
1.90 0.0748 22 46 0376874 A0021.9
2.00 0.0787 24 49 0376041 A0022.0
2.10 0.0826 24 49 0376058 A0022.1
2.20 0.0866 27 53 0376898 A0022.2
2.30 0.0905 27 53 0376904 A0022.3
2.40 0.0944 30 57 0376911 A0022.4
2.50 0.0984 30 57 0376065 A0022.5
2.60 0.1023 30 57 0376072 A0022.6
2.70 0.1062 33 61 0376089 A0022.7
2.80 0.1102 33 61 0376096 A0022.8
2.90 0.1141 33 61 0376102 A0022.9
3.00 0.1181 33 61 0350577 A0023.0
3.10 0.1220 36 65 0350584 A0023.1
3.20 0.1259 36 65 0350607 A0023.2
3.25 0.1280 36 65 0605356 A0023.25
3.30 0.1299 36 65 0350614 A0023.3
3.40 0.1338 39 70 0350621 A0023.4
3.50 0.1377 39 70 0350638 A0023.5
3.60 0.1417 39 70 0350652 A0023.6
3.70 0.1456 39 70 0350669 A0023.7
3.80 0.1496 43 75 0350676 A0023.8
3.90 0.1535 43 75 0350683 A0023.9
4.00 0.1574 43 75 0350706 A0024.0
4.10 0.1614 43 75 0350713 A0024.1
4.20 0.1653 43 75 0350720 A0024.2
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
4.30 0.1692 47 80 0350737 A0024.3
4.40 0.1732 47 80 0350751 A0024.4
4.50 0.1771 47 80 0350768 A0024.5
4.60 0.1811 47 80 0350775 A0024.6
4.70 0.1850 47 80 0350782 A0024.7
4.80 0.1889 52 86 0350805 A0024.8
4.90 0.1929 52 86 0350812 A0024.9
5.00 0.1968 52 86 0350829 A0025.0
5.10 0.2007 52 86 0350836 A0025.1
5.20 0.2047 52 86 0350850 A0025.2
5.30 0.2086 52 86 0350867 A0025.3
5.40 0.2125 57 93 0350874 A0025.4
5.50 0.2165 57 93 0350881 A0025.5
5.60 0.2204 57 93 0350904 A0025.6
5.70 0.2244 57 93 0350911 A0025.7
5.80 0.2283 57 93 0350928 A0025.8
5.90 0.2322 57 93 0350935 A0025.9
6.00 0.2362 57 93 0350959 A0026.0
6.10 0.2401 63 101 0350966 A0026.1
6.20 0.2440 63 101 0350973 A0026.2
6.30 0.2480 63 101 0350980 A0026.3
6.40 0.2519 63 101 0351000 A0026.4
6.50 0.2559 63 101 0351017 A0026.5
6.60 0.2598 63 101 0351024 A0026.6
6.70 0.2637 63 101 0351031 A0026.7
6.80 0.2677 69 109 0351055 A0026.8
6.90 0.2716 69 109 0351062 A0026.9
7.00 0.2755 69 109 0351079 A0027.0
7.10 0.2795 69 109 0351086 A0027.1
7.20 0.2834 69 109 0351109 A0027.2
7.30 0.2874 69 109 0351116 A0027.3
7.40 0.2913 69 109 0351123 A0027.4
7.50 0.2952 69 109 0351130 A0027.5
7.60 0.2992 75 117 0351154 A0027.6
ƔJobber Drill ƔBroca , serie corta
Bright fi nish below 2.0 mm, TiN Tipped 2.0 mm and above
No split point below 2.00 mm
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 69
www.precisiondormer.com
A002
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
7.70 0.3031 75 117 0351161 A0027.7
7.80 0.3070 75 117 0351178 A0027.8
7.90 0.3110 75 117 0351185 A0027.9
8.00 0.3149 75 117 0351208 A0028.0
8.10 0.3188 75 117 0351215 A0028.1
8.20 0.3228 75 117 0351222 A0028.2
8.30 0.3267 75 117 0351239 A0028.3
8.40 0.3307 75 117 0351253 A0028.4
8.50 0.3346 75 117 0351260 A0028.5
8.60 0.3385 81 125 0351277 A0028.6
8.70 0.3425 81 125 0351284 A0028.7
8.80 0.3464 81 125 0351307 A0028.8
8.90 0.3503 81 125 0351314 A0028.9
9.00 0.3543 81 125 0351321 A0029.0
9.10 0.3582 81 125 0351338 A0029.1
9.20 0.3622 81 125 0351352 A0029.2
9.30 0.3661 81 125 0351369 A0029.3
9.40 0.3700 81 125 0351376 A0029.4
9.50 0.3740 81 125 0351383 A0029.5
9.60 0.3779 87 133 0351406 A0029.6
9.70 0.3818 87 133 0351413 A0029.7
9.80 0.3858 87 133 0351420 A0029.8
9.90 0.3897 87 133 0351437 A0029.9
10.00 0.3937 87 133 0351451 A00210.0
10.10 0.3976 87 133 0351468 A00210.1
10.20 0.4015 87 133 0351475 A00210.2
10.30 0.4055 87 133 0351482 A00210.3
10.40 0.4094 87 133 0351505 A00210.4
10.50 0.4133 87 133 0351512 A00210.5
10.60 0.4173 87 133 0351529 A00210.6
10.70 0.4212 94 142 0351536 A00210.7
10.80 0.4251 94 142 0351550 A00210.8
10.90 0.4291 94 142 0351567 A00210.9
11.00 0.4330 94 142 0351574 A00211.0
11.10 0.4370 94 142 0351581 A00211.1
11.20 0.4409 94 142 0351604 A00211.2
11.30 0.4448 94 142 0351611 A00211.3
11.40 0.4488 94 142 0351628 A00211.4
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
11.50 0.4527 94 142 0351635 A00211.5
11.60 0.4566 94 142 0351659 A00211.6
11.70 0.4606 94 142 0351666 A00211.7
11.80 0.4645 94 142 0351673 A00211.8
11.90 0.4685 101 151 0351680 A00211.9
12.00 0.4724 101 151 0351703 A00212.0
12.10 0.4763 101 151 0351710 A00212.1
12.20 0.4803 101 151 0351727 A00212.2
12.30 0.4842 101 151 0351734 A00212.3
12.40 0.4881 101 151 0351758 A00212.4
12.50 0.4920 101 151 0351765 A00212.5
12.60 0.4960 101 151 0351772 A00212.6
12.70 0.5000 101 151 0351796 A00212.7
12.80 0.5039 101 151 0351802 A00212.8
12.90 0.5078 101 151 0351819 A00212.9
13.00 0.5118 101 151 0351826 A00213.0
13.10 0.5157 101 151 0385180 A00213.1
13.20 0.5196 101 151 0385524 A00213.2
13.25 0.5216 108 160 0385579 A00213.25
13.30 0.5236 108 160 0385197 A00213.3
13.40 0.5275 108 160 0385531 A00213.4
13.50 0.5314 108 160 0385548 A00213.5
13.60 0.5354 108 160 0385203 A00213.6
13.70 0.5393 108 160 0385210 A00213.7
13.75 0.5413 108 160 0385586 A00213.75
13.80 0.5433 108 160 0385227 A00213.8
13.90 0.5472 108 160 0385494 A00213.9
14.00 0.5511 108 160 0384497 A00214.0
14.25 0.5610 114 169 0385234 A00214.25
14.50 0.5708 114 169 0385241 A00214.5
14.75 0.5807 114 169 0385258 A00214.75
15.00 0.5905 114 169 0385265 A00215.0
15.25 0.6003 120 178 0385272 A00215.25
15.50 0.6102 120 178 0385289 A00215.5
15.75 0.6200 120 178 0385296 A00215.75
16.00 0.6299 120 178 0385302 A00216.0
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
70 www.precisiondormer.com
QC21CO
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/8 1.7/8 013504
52 0.0635 7/8 2“ 015752
51 0.0670 1“ 2“ 015751
50 0.0700 1“ 2“ 015750
49 0.0730 1“ 2“ 015749
48 0.0760 1“ 2“ 015748
5/64 0.0781 1“ 2“ 013505
47 0.0785 1“ 2“ 015747
46 0.0810 1.1/8 2.1/8 015746
45 0.0820 1.1/8 2.1/8 015745
44 0.0860 1.1/8 2.1/8 015744
43 0.0890 1.1/4 2.1/4 015743
42 0.0935 1.1/4 2.1/4 015742
3/32 0.0938 1.1/4 2.1/4 013506
41 0.0960 1.3/8 2.3/8 015741
40 0.0980 1.3/8 2.3/8 015740
39 0.0995 1.3/8 2.3/8 015739
38 0.1015 1.7/16 2.1/2 015738
37 0.1040 1.7/16 2.1/2 015737
36 0.1065 1.7/16 2.1/2 015736
7/64 0.1094 1.1/2 2.5/8 013507
35 0.1100 1.1/2 2.5/8 015735
34 0.1110 1.1/2 2.5/8 015734
33 0.1130 1.1/2 2.5/8 015733
32 0.1160 1.5/8 2.3/4 015732
31 0.1200 1.5/8 2.3/4 015731
1/8 0.1250 1.5/8 2.3/4 013508
30 0.1285 1.5/8 2.3/4 015730
29 0.1360 1.3/4 2.7/8 015729
28 0.1405 1.3/4 2.7/8 015728
9/64 0.1406 1.3/4 2.7/8 013509
27 0.1440 1.7/8 3“ 015727
26 0.1470 1.7/8 3“ 015726
25 0.1495 1.7/8 3“ 015725
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
24 0.1520 2“ 3.1/8 015724
23 0.1540 2“ 3.1/8 015723
5/32 0.1562 2“ 3.1/8 013510
22 0.1570 2“ 3.1/8 015722
21 0.1590 2.1/8 3.1/4 015721
20 0.1610 2.1/8 3.1/4 015720
19 0.1660 2.1/8 3.1/4 015719
18 0.1695 2.1/8 3.1/4 015718
11/64 0.1719 2.1/8 3.1/4 013511
17 0.1730 2.3/16 3.3/8 015717
16 0.1770 2.3/16 3.3/8 015716
15 0.1800 2.3/16 3.3/8 015715
14 0.1820 2.3/16 3.3/8 015714
13 0.1850 2.5/16 3.1/2 015713
3/16 0.1875 2.5/16 3.1/2 013512
12 0.1890 2.5/16 3.1/2 015712
11 0.1910 2.5/16 3.1/2 015711
10 0.1935 2.7/16 3.5/8 015710
90.1960 2.7/16 3.5/8 015709
80.1990 2.7/16 3.5/8 015708
70.2010 2.7/16 3.5/8 015707
13/64 0.2031 2.7/16 3.5/8 013513
60.2040 2.1/2 3.3/4 015706
50.2055 2.1/2 3.3/4 015705
40.2090 2.1/2 3.3/4 015704
30.2130 2.1/2 3.3/4 015703
7/32 0.2188 2.1/2 3.3/4 013514
20.2210 2.5/8 3.7/8 015702
10.2280 2.5/8 3.7/8 015701
A0.2340 2.5/8 3.7/8 013601
15/64 0.2344 2.5/8 3.7/8 013515
B0.2380 2.3/4 4“ 013602
C0.2420 2.3/4 4“ 013603
D0.2460 2.3/4 4“ 013604
ƔWide-land parabolic fl ute ƔCanal Parabólico
ƔGoujure Parabolique
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 71
www.precisiondormer.com
QC21CO - QC21COM
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
E0.2500 2.3/4 4“ 013605
1/4 0.2500 2.3/4 4“ 013516
F0.2570 2.7/8 4.1/8 013606
G0.2610 2.7/8 4.1/8 013607
17/64 0.2656 2.7/8 4.1/8 013517
H0.2660 2.7/8 4.1/8 013608
I0.2720 2.7/8 4.1/8 013609
J0.2770 2.7/8 4.1/8 013610
K0.2810 2.15/16 4.1/4 013611
9/32 0.2812 2.15/16 4.1/4 013518
L0.2900 2.15/16 4.1/4 013612
M0.2950 3.1/16 4.3/8 013613
19/64 0.2969 3.1/16 4.3/8 013519
N0.3020 3.1/16 4.3/8 013614
5/16 0.3125 3.3/16 4.1/2 013520
O0.3160 3.3/16 4.1/2 013615
P0.3230 3.5/16 4.5/8 013616
21/64 0.3281 3.5/16 4.5/8 013521
Q0.3320 3.7/16 4.3/4 013617
R0.3390 3.7/16 4.3/4 013618
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
11/32 0.3438 3.7/16 4.3/4 013522
S0.3480 3.1/2 4.7/8 013619
T0.3580 3.1/2 4.7/8 013620
23/64 0.3594 3.1/2 4.7/8 013523
U0.3680 3.5/8 5“ 013621
3/8 0.3750 3.5/8 5“ 013524
V0.3770 3.5/8 5“ 013622
W0.3860 3.3/4 5.1/8 013623
25/64 0.3906 3.3/4 5.1/8 013525
X0.3970 3.3/4 5.1/8 013624
Y0.4040 3.7/8 5.1/4 013625
13/32 0.4062 3.7/8 5.1/4 013526
Z0.4130 3.7/8 5.1/4 013626
27/64 0.4219 3.15/16 5.3/8 013527
7/16 0.4375 4.1/16 5.1/2 013528
29/64 0.4531 4.3/16 5.5/8 013529
15/32 0.4688 4.5/16 5.3/4 013530
31/64 0.4844 4.3/8 5.7/8 013531
1/2 0.5000 4.1/2 6“ 013532
QC21COM
Ŷ
Ɣ
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
1.50 0.0591 18 40 016715
2.00 0.0787 24 49 016720
2.50 0.0984 30 57 016725
3.00 0.1181 33 61 016730
3.50 0.1378 39 70 016735
4.00 0.1575 43 75 016740
4.50 0.1772 47 80 016745
5.00 0.1969 52 86 016750
5.20 0.2047 52 86 016752
5.50 0.2165 57 93 016755
5.60 0.2205 57 93 016756
6.00 0.2362 57 93 016760
6.50 0.2559 63 101 016765
6.80 0.2677 69 109 016768
7.00 0.2758 69 109 016770
7.50 0.2953 69 109 016775
8.00 0.3150 75 117 016780
8.20 0.3228 75 117 016782
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
8.50 0.3346 75 117 016785
8.60 0.3386 81 125 016786
9.00 0.3543 81 125 016790
9.50 0.3740 81 125 016795
10.00 0.3937 87 133 016800
10.50 0.4134 87 133 016805
11.00 0.4331 94 142 016810
11.50 0.4528 94 142 016815
12.00 0.4724 101 151 016820
12.50 0.4921 101 151 016825
13.00 0.5118 101 151 016830
ƔWide-land parabolic fl ute ƔCanal Parabólico
ƔGoujure Parabolique
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
ƔWide-land parabolic fl ute ƔCanal Parabólico
ƔGoujure Parabolique
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
72 www.precisiondormer.com
QC21V
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/8 1.7/8 081404
52 0.0635 7/8 1.7/8 080452
51 0.0670 1“ 2“ 080451
50 0.0700 1“ 2“ 080450
49 0.0730 1“ 2“ 080449
48 0.0760 1“ 2“ 080448
5/64 0.0781 1“ 2“ 081405
47 0.0785 1“ 2“ 080447
46 0.0810 1.1/8 2.1/8 080446
45 0.0820 1.1/8 2.1/8 080445
44 0.0860 1.1/8 2.1/8 080444
43 0.0890 1.1/4 2.1/4 080443
42 0.0935 1.1/4 2.1/4 080442
3/32 0.0938 1.1/4 2.1/4 081406
41 0.0960 1.3/8 2.3/8 080441
40 0.0980 1.3/8 2.3/8 080440
39 0.0995 1.3/8 2.3/8 080439
38 0.1015 1.7/16 2.1/2 080438
37 0.1040 1.7/16 2.1/2 080437
36 0.1065 1.7/16 2.1/2 080436
7/64 0.1094 1.1/2 2.5/8 081407
35 0.1100 1.1/2 2.5/8 080435
34 0.1110 1.1/2 2.5/8 080434
33 0.1130 1.1/2 2.5/8 080433
32 0.1160 1.5/8 2.3/4 080432
31 0.1200 1.5/8 2.3/4 080431
1/8 0.1250 1.5/8 2.3/4 081408
30 0.1285 1.5/8 2.3/4 080430
29 0.1360 1.3/4 2.7/8 080429
28 0.1405 1.3/4 2.7/8 080428
9/64 0.1406 1.3/4 2.7/8 081409
27 0.1440 1.7/8 3“ 080427
26 0.1470 1.7/8 3“ 080426
25 0.1495 1.7/8 3“ 080425
24 0.1520 2“ 3.1/8 080424
23 0.1540 2“ 3.1/8 080423
5/32 0.1562 2“ 3.1/8 081410
22 0.1570 2“ 3.1/8 080422
21 0.1590 2.1/8 3.1/4 080421
20 0.1610 2.1/8 3.1/4 080420
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
19 0.1660 2.1/8 3.1/4 080419
18 0.1695 2.1/8 3.1/4 080418
11/64 0.1719 2.1/8 3.1/4 081411
17 0.1730 2.3/16 3.3/8 080417
16 0.1770 2.3/16 3.3/8 080416
15 0.1800 2.3/16 3.3/8 080415
14 0.1820 2.3/16 3.3/8 080414
13 0.1850 2.5/16 3.1/2 080413
3/16 0.1875 2.5/16 3.1/2 081412
12 0.1890 2.5/16 3.1/2 080412
11 0.1910 2.5/16 3.1/2 080411
10 0.1935 2.7/16 3.5/8 080410
90.1960 2.7/16 3.5/8 080409
80.1990 2.7/16 3.5/8 080408
70.2010 2.7/16 3.5/8 080407
13/64 0.2031 2.7/16 3.5/8 081413
60.2040 2.1/2 3.3/4 080406
50.2055 2.1/2 3.3/4 080405
40.2090 2.1/2 3.3/4 080404
30.2130 2.1/2 3.3/4 080403
7/32 0.2188 2.1/2 3.3/4 081414
20.2210 2.5/8 3.7/8 080402
10.2280 2.5/8 3.7/8 080401
15/64 0.2344 2.5/8 3.7/8 081415
1/4 0.2500 2.3/4 4“ 081416
17/64 0.2656 2.7/8 4.1/8 081417
9/32 0.2812 2.15/16 4.1/4 081418
19/64 0.2969 3.1/16 4.3/8 081419
5/16 0.3125 3.3/16 4.1/2 081420
21/64 0.3281 3.5/16 4.5/8 081421
11/32 0.3438 3.7/16 4.3/4 081422
23/64 0.3594 3.1/2 4.7/8 081423
3/8 0.3750 3.5/8 5“ 081424
25/64 0.3906 3.3/4 5.1/8 081425
13/32 0.4062 3.7/8 5.1/4 081426
27/64 0.4219 3.15/16 5.3/8 081427
7/16 0.4375 4.1/16 5.1/2 081428
29/64 0.4531 4.3/16 5.5/8 081429
15/32 0.4688 4.5/16 5.3/4 081430
31/64 04844 4.3/8 5.7/8 081431
1/2 0.5000 4.1/2 6“ 081432
ƔWide-land parabolic fl ute ƔCanal Parabólico
ƔGoujure Parabolique
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 73
www.precisiondormer.com
QC21G
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/8 1.7/8 081704
52 0.0635 7/8 1.7/8 080552
51 0.0670 1“ 2“ 080551
50 0.0700 1“ 2“ 080550
49 0.0730 1“ 2“ 080549
48 0.0760 1“ 2“ 080548
5/64 0.0781 1“ 2“ 081705
47 0.0785 1“ 2“ 080547
46 0.0810 1.1/8 2.1/8 080546
45 0.0820 1.1/8 2.1/8 080545
44 0.0860 1.1/8 2.1/8 080544
43 0.0890 1.1/4 2.1/4 080543
42 0.0935 1.1/4 2.1/4 080542
3/32 0.0938 1.1/4 2.1/4 081706
41 0.0960 1.3/8 2.3/8 080541
40 0.0980 1.3/8 2.3/8 080540
39 0.0995 1.3/8 2.3/8 080539
38 0.1015 1.7/16 2.1/2 080538
37 0.1040 1.7/16 2.1/2 080537
36 0.1065 1.7/16 2.1/2 080536
7/64 0.1094 1.1/2 2.5/8 081707
35 0.1100 1.1/2 2.5/8 080535
34 0.1110 1.1/2 2.5/8 080534
33 0.1130 1.1/2 2.5/8 080533
32 0.1160 1.5/8 2.3/4 080532
31 0.1200 1.5/8 2.3/4 080531
1/8 0.1250 1.5/8 2.3/4 081708
30 0.1285 1.5/8 2.3/4 080530
29 0.1360 1.3/4 2.7/8 080529
28 0.1405 1.3/4 2.7/8 080528
9/64 0.1406 1.3/4 2.7/8 081709
27 0.1440 1.7/8 3“ 080527
26 0.1470 1.7/8 3“ 080526
25 0.1495 1.7/8 3“ 080525
24 0.1520 2“ 3.1/8 080524
23 0.1540 2“ 3.1/8 080523
5/32 0.1562 2“ 3.1/8 081710
22 0.1570 2“ 3.1/8 080522
21 0.1590 2.1/8 3.1/4 080521
20 0.1610 2.1/8 3.1/4 080520
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
19 0.1660 2.1/8 3.1/4 080519
18 0.1695 2.1/8 3.1/4 080518
11/64 0.1719 2.1/8 3.1/4 081711
17 0.1730 2.3/16 3.3/8 080517
16 0.1770 2.3/16 3.3/8 080516
15 0.1800 2.3/16 3.3/8 080515
14 0.1820 2.3/16 3.3/8 080514
13 0.1850 2.5/16 3.1/2 080513
3/16 0.1875 2.5/16 3.1/2 081712
12 0.1890 2.5/16 3.1/2 080512
11 0.1910 2.5/16 3.1/2 080511
10 0.1935 2.7/16 3.5/8 080510
90.1960 2.7/16 3.5/8 080509
80.1990 2.7/16 3.5/8 080508
70.2010 2.7/16 3.5/8 080507
13/64 0.2031 2.7/16 3.5/8 081713
60.2040 2.1/2 3.3/4 080506
50.2055 2.1/2 3.3/4 080505
40.2090 2.1/2 3.3/4 080504
30.2130 2.1/2 3.3/4 080503
7/32 0.2188 2.1/2 3.3/4 081714
20.2210 2.5/8 3.7/8 080502
10.2280 2.5/8 3.7/8 080501
15/64 0.2344 2.5/8 3.7/8 081715
1/4 0.2500 2.3/4 4“ 081716
17/64 0.2656 2.7/8 4.1/8 081717
9/32 0.2812 2.15/16 4.1/4 081718
19/64 0.2969 3.1/16 4.3/8 081719
5/16 0.3125 3.3/16 4.1/2 081720
21/64 0.3281 3.5/16 4.5/8 081721
11/32 0.3438 3.7/16 4.3/4 081722
23/64 0.3594 3.1/2 4/7/8 081723
3/8 0.3750 3.5/8 5“ 081724
25/64 0.3906 3.3/4 5.1/8 081725
13/32 0.4062 3.7/8 5.1/4 081726
7/16 0.4375 4.1/16 5.1/2 081728
29/64 0.4531 4.3/16 5.5/8 081729
15/32 0.4688 4.5/16 5.3/4 081730
31/64 0.4844 4.3/8 5.7/8 081731
1/2 0.5000 4.1/2 6“ 081732
ƔWide-land parabolic fl ute ƔCanal Parabólico
ƔGoujure Parabolique
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
74 www.precisiondormer.com
5/16 0.3125 3.3/16 4.1/2 081620
21/64 0.3281 3.5/16 4.5/8 081621
11/32 0.3438 3.7/16 4.3/4 081622
23/64 0.3594 3.1/2 4.7/8 081623
3/8 0.3750 3.5/8 5“ 081624
25/64 0.3906 3.3/4 5.1/8 081625
13/32 0.4062 3.7/8 5.1/4 081626
27/64 0.4219 3.15/16 5.3/8 081627
7/16 0.4375 4.1/16 5.1/2 081628
29/64 0.4531 4.3/16 5.5/8 081629
15/32 0.4688 4.5/16 5.3/4 081630
31/64 0.4844 4.3/8 5.7/8 081631
1/2 0.5000 4.1/2 6“ 081632
QC21
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/8 1.7/8 081604
52 0.0635 7/8 1.7/8 080652
51 0.0670 1“ 2“ 080651
50 0.0700 1“ 2“ 080650
49 0.0730 1“ 2“ 080649
48 0.0760 1“ 2“ 080648
5/64 0.0781 1“ 2“ 081605
47 0.0785 1“ 2“ 080647
46 0.0810 1.1/8 2.1/8 080646
45 0.0820 1.1/8 2.1/8 080645
44 0.0860 1.1/8 2.1/8 080644
43 0.0890 1.1/4 2.1/4 080643
42 0.0935 1.1/4 2.1/4 080642
3/32 0.0938 1.1/4 2.1/4 081606
41 0.0960 1.3/8 2.3/8 080641
40 0.0980 1.3/8 2.3/8 080640
39 0.0995 1.3/8 2.3/8 080639
38 0.1015 1.7/16 2.1/2 080638
37 0.1040 1.7/16 2.1/2 080637
36 0.1065 1.7/16 2.1/2 080636
7/64 0.1094 1.1/2 2.5/8 081607
35 0.1100 1.1/2 2.5/8 080635
34 0.1110 1.1/2 2.5/8 080634
33 0.1130 1.1/2 2.5/8 080633
32 0.1160 1.5/8 2.3/4 080632
31 0.1200 1.5/8 2.3/4 080631
1/8 0.1250 1.5/8 2.3/4 081608
30 0.1285 1.5/8 2.3/4 080630
29 0.1360 1.3/4 2.7/8 080629
28 0.1405 1.3/4 2.7/8 080628
9/64 0.1406 1.3/4 2.7/8 081609
27 0.1440 1.7/8 3“ 080627
26 0.1470 1.7/8 3“ 080626
25 0.1495 1.7/8 3“ 080625
24 0.1520 2“ 3.1/8 080624
23 0.1540 2“ 3.1/8 080623
5/32 0.1562 2“ 3.1/8 081610
22 0.1570 2“ 3.1/8 080622
21 0.1590 2.1/8 3.1/4 080621
20 0.1610 2.1/8 3.1/4 080620
19 0.1660 2.1/8 3.1/4 080619
18 0.1695 2.1/8 3.1/4 080618
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
11/64 0.1719 2.1/8 3.1/4 081611
17 0.1730 2.3/16 3.3/8 080617
16 0.1770 2.3/16 3.3/8 080616
15 0.1800 2.3/16 3.3/8 080615
14 0.1820 2.3/16 3.3/8 080614
13 0.1850 2.5/16 3.1/2 080613
3/16 0.1875 2.5/16 3.1/2 081612
12 0.1890 2.5/16 3.1/2 080612
11 0.1910 2.5/16 3.1/2 080611
10 0.1935 2.7/16 3.5/8 080610
90.1960 2.7/16 3.5/8 080609
80.1990 2.7/16 3.5/8 080608
70.2010 2.7/16 3.5/8 080607
13/64 0.2031 2.7/16 3.5/8 081613
60.2040 2.1/2 3.3/4 080606
50.2055 2.1/2 3.3/4 080605
40.2090 2.1/2 3.3/4 080604
30.2130 2.1/2 3.3/4 080603
7/32 0.2188 2.1/2 3.3/4 081614
20.2210 2.5/8 3.7/8 080602
10.2280 2.5/8 3.7/8 080601
15/64 0.2344 2.5/8 3.7/8 081615
1/4 0.2500 2.3/4 4“ 081616
17/64 0.2656 2.7/8 4.1/8 081617
9/32 0.2812 2.15/16 4.1/4 081618
19/64 0.2969 3.1/16 4.3/8 081619
ƔWide-land parabolic fl ute ƔCanal Parabólico
ƔGoujure Parabolique
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 75
www.precisiondormer.com
QC21P
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/8 1.7/8 015804
52 0.0635 7/8 1.7/8 019452
51 0.0670 1“ 2“ 019451
50 0.0700 1“ 2“ 019450
49 0.0730 1“ 2“ 019449
48 0.0760 1“ 2“ 019448
5/64 0.0781 1“ 2“ 015805
47 0.0785 1“ 2“ 019447
46 0.0810 1.1/8 2.1/8 019446
45 0.0820 1.1/8 2.1/8 019445
44 0.0860 1.1/8 2.1/8 019444
43 0.0890 1.1/4 2.1/4 019443
42 0.0935 1.1/4 2.1/4 019442
3/32 0.0938 1.1/4 2.1/4 015806
41 0.0960 1.3/8 2.3/8 019441
40 0.0980 1.3/8 2.3/8 019440
39 0.0995 1.3/8 2.3/8 019439
38 0.1015 1.7/16 2.1/2 019438
37 0.1040 1.7/16 2.1/2 019437
36 0.1065 1.7/16 2.1/2 019436
7/64 0.1094 1.1/2 2.5/8 015807
35 0.1100 1.1/2 2.5/8 019435
34 0.1110 1.1/2 2.5/8 019434
33 0.1130 1.1/2 2.5/8 019433
32 0.1160 1.5/8 2.3/4 019432
31 0.1200 1.5/8 2.3/4 019431
1/8 0.1250 1.5/8 2.3/4 015808
30 0.1285 1.5/8 2.3/4 019430
29 0.1360 1.3/4 2.7/8 019429
28 0.1405 1.3/4 2.7/8 019428
9/64 0.1406 1.3/4 2.7/8 015809
27 0.1440 1.7/8 3“ 019427
26 0.1470 1.7/8 3“ 019426
25 0.1495 1.7/8 3“ 019425
24 0.1520 2“ 3.1/8 019424
23 0.1540 2“ 3.1/8 019423
5/32 0.1562 2“ 3.1/8 015810
22 0.1570 2“ 3.1/8 019422
21 0.1590 2.1/8 3.1/4 019421
20 0.1610 2.1/8 3.1/4 019420
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
19 0.1660 2.1/8 3.1/4 019419
18 0.1695 2.1/8 3.1/4 019418
11/64 0.1719 2.1/8 3.1/4 015811
17 0.1730 2.3/16 3.3/8 019417
16 0.1770 2.3/16 3.3/8 019416
15 0.1800 2.3/16 3.3/8 019415
14 0.1820 2.3/16 3.3/8 019414
13 0.1850 2.5/16 3.1/2 019413
3/16 0.1875 2.5/16 3.1/2 015812
12 0.1890 2.5/16 3.1/2 019412
11 0.1910 2.5/16 3.1/2 019411
10 0.1935 2.7/16 3.5/8 019410
90.1960 2.7/16 3.5/8 019409
80.1990 2.7/16 3.5/8 019408
70.2010 2.7/16 3.5/8 019407
13/64 0.2031 2.7/16 3.5/8 015813
60.2040 2.1/2 3.3/4 019406
50.2055 2.1/2 3.3/4 019405
40.2090 2.1/2 3.3/4 019404
30.2130 2.1/2 3.3/4 019403
7/32 0.2188 2.1/2 3.3/4 015814
20.2210 2.5/8 3.7/8 019402
10.2280 2.5/8 3.7/8 019401
A0.2340 2.5/8 3.7/8 019301
15/64 0.2344 2.5/8 3.7/8 015815
B0.2380 2.3/4 4“ 019302
C0.2420 2.3/4 4“ 019303
D0.2460 2.3/4 4“ 019304
E0.2500 2.3/4 4“ 019305
1/4 0.2500 2.3/4 4“ 015816
F0.2570 2.7/8 4.1/8 019306
G0.2610 2.7/8 4.1/8 019307
17/64 0.2656 2.7/8 4.1/8 015817
H0.2660 2.7/8 4.1/8 019308
I0.2720 2.7/8 4.1/8 019309
J0.2770 2.7/8 4.1/8 019310
K0.2810 2.15/16 4.1/4 019311
9/32 0.2812 2.15/16 4.1/4 015818
L0.2900 2.15/16 4.1/4 019312
Ŷ
Ɣ
ƔWide-land parabolic fl ute ƔCanal Parabólico
ƔGoujure Parabolique
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
76 www.precisiondormer.com
QC21P - QC21GM
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
M0.2950 3.1/16 4.3/8 019313
19/64 0.2969 3.1/16 4.3/8 015819
N0.3020 3.1/16 4.3/8 019314
5/16 0.3125 3.3/16 4.1/2 015820
O0.3160 3.3/16 4.1/2 019315
P0.3230 3.5/16 4.5/8 019316
21/64 0.3281 3.5/16 4.5/8 015821
Q0.3320 3.7/16 4.3/4 019317
R0.3390 3.7/16 4.3/4 019318
11/32 0.3438 3.7/16 4.3/4 015822
S0.3480 3.1/2 4.7/8 019319
T0.3580 3.1/2 4.7/8 019320
23/64 0.3594 3.1/2 4.7/8 015823
U0.3680 3.5/8 5“ 019321
3/8 0.3750 3.5/8 5“ 015824
V0.3770 3.5/8 5“ 019322
W0.3860 3.3/4 5.1/8 019323
25/64 0.3906 3.3/4 5.1/8 015825
X0.3970 3.3/4 5.1/8 019324
Y0.4040 3.7/8 5.1/4 019325
13/32 0.4062 3.7/8 5.1/4 015826
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
Z0.4130 3.7/8 5.1/4 019326
27/64 0.4219 3.15/16 5.3/8 015827
7/16 0.4375 4.1/16 5.1/2 015828
29/64 0.4531 4.3/16 5.5/8 015829
15/32 0.4688 4.5/16 5.3/4 015830
31/64 0.4844 4.3/8 5.7/8 015831
1/2 0.5000 4.1/2 6“ 015832
33/64 0.5156 4.13/16 6.5/8 015833
17/32 0.5312 4.13/16 6.5/8 015834
35/64 0.5469 4.13/16 6.5/8 015835
9/16 0.5625 4.13/16 6.5/8 015836
37/64 0.5781 4.13/16 6.5/8 015837
19/32 0.5938 5.3/16 7.1/8 015838
39/64 0.6094 5.3/16 7.1/8 015839
5/8 0.6250 5.3/16 7.1/8 015840
41/64 0.6406 5.3/16 7.1/8 015841
21/32 0.6562 5.3/16 7.1/8 015842
43/64 0.6719 5.5/8 7.5/8 015843
11/16 0.6875 5.5/8 7.5/8 015844
ƔWide-land parabolic fl ute ƔCanal Parabólico
ƔGoujure Parabolique
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
QC21GM
Ŷ
Ɣ
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
1.50 0.0591 18 40 019815
2.00 0.0787 24 49 019820
2.50 0.0984 30 57 019825
3.00 0.1181 33 61 019830
3.50 0.1378 39 70 019835
4.00 0.1575 43 75 019840
4.50 0.1772 47 80 019845
5.00 0.1969 52 86 019850
5.20 0.2047 52 86 019852
5.50 0.2165 57 93 019855
5.60 0.2205 57 93 019856
6.00 0.2362 57 93 019860
6.50 0.2559 63 101 019865
6.80 0.2677 69 109 019868
7.00 0.2756 69 109 019870
7.50 0.2953 69 109 019875
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
8.00 0.3150 75 117 019880
8.20 0.3228 75 117 019882
8.50 0.3346 75 117 019885
8.60 0.3386 81 125 019886
9.00 0.3543 81 125 019890
9.50 0.3740 81 125 019895
10.00 0.3937 87 133 019900
10.50 0.4134 87 133 019905
11.00 0.4331 94 142 019910
11.50 0.4528 94 142 019915
12.00 0.4724 101 151 019920
12.50 0.4921 101 151 019925
13.00 0.5118 101 151 019930
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 77
www.precisiondormer.com
d1
Ø
mm
d1
dec.
Inch l2
mm
1
l
mm
EDP #
or
e-Code
1.50 0.0591 18 40 013115
2.00 0.0787 24 49 013120
2.50 0.0984 30 57 013125
3.00 0.1181 33 61 013130
3.50 0.1378 39 70 013135
4.00 0.1575 43 75 013140
4.50 0.1772 47 80 013145
5.00 0.1969 52 86 013150
5.20 0.2047 52 86 013152
5.50 0.2165 57 93 013155
5.60 0.2205 57 93 013156
6.00 0.2362 57 93 013160
6.50 0.2559 63 101 013165
6.80 0.2677 69 109 013168
7.00 0.2756 69 109 013170
7.50 0.2953 69 109 013175
8.00 0.3150 75 117 013180
8.20 0.3228 75 117 013182
8.50 0.3346 75 117 013185
8.60 0.3386 81 125 013186
d1
Ø
mm
d1
dec.
Inch l2
mm
1
l
mm
EDP #
or
e-Code
9.00 0.3543 81 125 013190
9.50 0.3740 81 125 013195
10.00 0.3937 87 133 014900
10.50 0.4134 87 133 014905
11.00 0.4331 94 142 014910
11.50 0.4528 94 142 014915
12.00 0.4724 101 151 014920
12.50 0.4921 101 151 014925
13.00 0.5118 101 151 014930
13.50 0.5315 108 160 014935
14.00 0.5512 108 160 014940
14.50 0.5709 114 169 014945
15.00 0.5906 114 169 014950
15.50 0.6102 120 178 014955
16.00 0.6299 120 178 014960
16.50 0.6496 125 184 014965
17.00 0.6693 125 184 014970
17.50 0.6890 130 191 014975
QC21PM
ŶƔ
ƔWide-land parabolic fl ute ƔCanal Parabólico
ƔGoujure Parabolique
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
QC21M - QC21PM
QC21M
ŶƔ
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
1.50 0.0591 18 40 012115
2.00 0.0787 24 49 012120
2.50 0.0984 30 57 012125
3.00 0.1181 33 61 012130
3.50 0.1378 39 70 012135
4.00 0.1575 43 75 012140
4.50 0.1772 47 80 012145
5.00 0.1969 52 86 012150
5.20 0.2047 52 86 012152
5.50 0.2165 57 93 012155
5.60 0.2205 57 93 012156
6.00 0.2362 57 93 012160
6.50 0.2559 63 101 012165
6.80 0.2677 69 109 012168
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
7.00 0.2756 69 109 012170
7.50 0.2953 69 109 012175
8.00 0.3150 75 117 012180
8.20 0.3228 75 117 012182
8.50 0.3346 75 117 012185
8.60 0.3386 81 125 012186
9.00 0.3543 81 125 012190
9.50 0.3740 81 125 012195
10.00 0.3937 87 133 012900
10.50 0.4134 87 133 012905
11.00 0.4331 94 142 012910
11.50 0.4528 94 142 012915
12.00 0.4724 101 151 012920
12.50 0.4921 101 151 012925
13.00 0.5118 101 151 012930
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
78 www.precisiondormer.com
R10CO
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/64 0.0156 3/16 3/4 010301
1/32 0.0312 1/2 1.3/8 010302
3/64 0.0469 3/4 1.3/4 010303
1/16 0.0625 7/8 1.7/8 010304
5/64 0.0781 1“ 2“ 010305
3/32 0.0938 1.1/4 2.1/4 010306
7/64 0.1094 1.1/2 2.5/8 010307
1/8 0.1250 1.5/8 2.3/4 010308
9/64 0.1406 1.3/4 2.7/8 010309
5/32 0.1562 2“ 3.1/8 010310
11/64 0.1719 2.1/8 3.1/4 010311
3/16 0.1875 2.5/16 3.1/2 010312
13/64 0.2031 2.7/16 3.5/8 010313
7/32 0.2188 2.1/2 3.3/4 010314
15/64 0.2344 2.5/8 3.7/8 010315
1/4 0.2500 2.3/4 4“ 010316
17/64 0.2656 2.7/8 4.1/8 010317
9/32 0.2812 2.15/16 4.1/4 010318
19/64 0.2969 3.1/16 4.3/8 010319
5/16 0.3125 3.3/16 4.1/2 010320
21/64 0.3281 3.5/16 4.5/8 010321
11/32 0.3438 3.7/16 4.3/4 010322
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
23/64 0.3594 3.1/2 4.7/8 010323
3/8 0.3750 3.5/8 5“ 010324
25/64 0.3906 3.3/4 5.1/8 010325
13/32 0.4062 3.7/8 5.1/4 010326
27/64 0.4219 3.15/16 5.3/8 010327
7/16 0.4375 4.1/16 5.1/2 010328
29/64 0.4531 4.3/16 5.5/8 010329
15/32 0.4688 4.5/16 5.3/4 010330
31/64 0.4844 4.3/8 5.7/8 010331
1/2 0.5000 4.1/2 6“ 010332
33/64 0.5156 4.13/16 6.5/8 010333
17/32 0.5312 4.13/16 6.5/8 010334
35/64 0.5469 4.13/16 6.5/8 010335
9/16 0.5625 4.13/16 6.5/8 010336
37/64 0.5781 4.13/16 6.5/8 010337
19/32 0.5938 5.3/16 7.1/8 010338
39/64 0.6094 5.3/16 7.1/8 010339
5/8 0.6250 5.3/16 7.1/8 010340
41/64 0.6406 5.3/16 7.1/8 010341
21/32 0.6562 5.3/16 7.1/8 010342
43/64 0.6719 5.5/8 7.5/8 010343
11/16 0.6875 5.5/8 7.5/8 010344
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ɣ Type J
ƔHeavy-Duty
1) Not a split point
1)
1)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 79
www.precisiondormer.com
ƔHeavy-Duty
Ɣ Foret court
R18CO
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
80 0.0135 1/8 3/4 018380
79 0.0145 1/8 3/4 018379
78 0.0160 3/16 7/8 018378
77 0.0180 3/16 7/8 018377
76 0.0200 3/16 7/8 018376
75 0.0210 1/4 1“ 018375
74 0.0225 1/4 1“ 018374
73 0.0240 5/16 1.1/8 018373
72 0.0250 5/16 1.1/8 018372
71 0.0260 3/8 1.1/4 018371
70 0.0280 3/8 1.1/4 018370
69 0.0292 1/2 1.3/8 018369
68 0.0310 1/2 1.3/8 018368
67 0.0320 1/2 1.3/8 018367
66 0.0330 1/2 1.3/8 018366
65 0.0350 5/8 1.1/2 018365
64 0.0360 5/8 1.1/2 018364
63 0.0370 5/8 1.1/2 018363
62 0.0380 5/8 1.1/2 018362
61 0.0390 11/16 1.5/8 018361
60 0.0400 11/16 1.5/8 018360
59 0.0410 11/16 1.5/8 018359
58 0.0420 11/16 1.5/8 018358
57 0.0430 3/4 1.3/4 018357
56 0.0465 3/4 1.3/4 018356
55 0.0520 7/8 1.7/8 018355
54 0.0550 7/8 1.7/8 018354
53 0.0595 7/8 1.7/8 018353
52 0.0635 7/8 1.7/8 018352
51 0.0670 1“ 2“ 018351
50 0.0700 1“ 2“ 018350
49 0.0730 1“ 2“ 018349
48 0.0760 1“ 2“ 018348
47 0.0785 1“ 2“ 018347
46 0.0810 1.1/8 2.1/8 018346
45 0.0820 1.1/8 2.1/8 018345
44 0.0860 1.1/8 2.1/8 018344
43 0.0890 1.1/4 2.1/4 018343
42 0.0935 1.1/4 2.1/4 018342
41 0.0960 1.3/8 2.3/8 018341
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
40 0.0980 1.3/8 2.3/8 018340
39 0.0995 1.3/8 2.3/8 018339
38 0.1015 1.7/16 2.1/2 018338
37 0.1040 1.7/16 2.1/2 018337
36 0.1065 1.7/16 2.1/2 018336
35 0.1100 1.1/2 2.5/8 018335
34 0.1110 1.1/2 2.5/8 018334
33 0.1130 1.1/2 2.5/8 018333
32 0.1160 1.5/8 2.3/4 018332
31 0.1200 1.5/8 2.3/4 018331
30 0.1285 1.5/8 2.3/4 018330
29 0.1360 1.3/4 2.7/8 018329
28 0.1405 1.3/4 2.7/8 018328
27 0.1440 1.7/8 3“ 018327
26 0.1470 1.7/8 3“ 018326
25 0.1495 1.7/8 3“ 018325
24 0.1520 2“ 3.1/8 018324
23 0.1540 2“ 3.1/8 018323
22 0.1570 2“ 3.1/8 018322
21 0.1590 2.1/8 3.1/4 018321
20 0.1610 2.1/8 3.1/4 018320
19 0.1660 2.1/8 3.1/4 018319
18 0.1695 2.1/8 3.1/4 018318
17 0.1730 2.3/16 3.3/8 018317
16 0.1770 2.3/16 3.3/8 018316
15 0.1800 2.3/16 3.3/8 018315
14 0.1820 2.3/16 3.3/8 018314
13 0.1850 2.5/16 3.1/2 018313
12 0.1890 2.5/16 3.1/2 018312
11 0.1910 2.5/16 3.1/2 018311
10 0.1935 2.7/16 3.5/8 018310
90.1960 2.7/16 3.5/8 018309
80.1990 2.7/16 3.5/8 018308
70.2010 2.7/16 3.5/8 018307
60.2040 2.1/2 3.3/4 018306
50.2055 2.1/2 3.3/4 018305
40.2090 2.1/2 3.3/4 018304
30.2130 2.1/2 3.3/4 018303
20.2210 2.5/8 3.7/8 018302
10.2280 2.5/8 3.7/8 018301
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
ƔJobber Drill ƔBroca , serie corta
1) Not a split point
Ɣ Type J
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
80 www.precisiondormer.com
R15CO
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
A0.2340 2.5/8 3.7/8 015301
B0.2380 2.3/4 4“ 015302
C0.2420 2.3/4 4“ 015303
D0.2460 2.3/4 4“ 015304
E0.2500 2.3/4 4“ 015305
F0.2570 2.7/8 4.1/8 015306
G0.2610 2.7/8 4.1/8 015307
H0.2660 2.7/8 4.1/8 015308
I0.2720 2.7/8 4.1/8 015309
J0.2770 2.7/8 4.1/8 015310
K0.2810 2.15/16 4.1/4 015311
L0.2900 2.15/16 4.1/4 015312
M0.2950 3.1/16 4.3/8 015313
N0.3020 3.1/16 4.3/8 015314
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
O0.3160 3.3/16 4.1/2 015315
P0.3230 3.5/16 4.5/8 015316
Q0.3320 3.7/16 4.3/4 015317
R0.3390 3.7/16 4.3/4 015318
S0.3480 3.1/2 4.7/8 015319
T0.3580 3.1/2 4.7/8 015320
U0.3680 3.5/8 5“ 015321
V0.3770 3.5/8 5“ 015322
W0.3860 3.3/4 5.1/8 015323
X0.3970 3.3/4 5.1/8 015324
Y0.4040 3.7/8 5.1/4 015325
Z0.4130 3.7/8 5.1/4 015326
ƔJobber Drill Ɣ Foret court ƔBroca , serie corta
Ɣ Type J
ƔHeavy-Duty
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 81
www.precisiondormer.com
2ACO
Ɣ Foret court
ƔJobber Drill ƔBroca , serie corta
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
1.00 0.0394 12 34 016410
1.05 0.0413 12 34 016355
1.10 0.0433 14 36 016411
1.15 0.0453 14 36 016356
1.20 0.0472 16 38 016412
1.25 0.0492 16 38 016357
1.30 0.0512 16 38 016413
1.35 0.0531 18 40 016358
1.40 0.0551 18 40 016414
1.45 0.0571 18 40 016359
1.50 0.0591 18 40 016415
1.55 0.0610 20 43 016360
1.60 0.0630 20 43 016416
1.65 0.0650 20 43 016361
1.70 0.0669 20 43 016417
1.75 0.0689 22 46 016362
1.80 0.0709 22 46 016418
1.85 0.0728 22 46 016363
1.90 0.0748 22 46 016419
1.95 0.0768 24 49 016364
2.00 0.0787 24 49 016420
2.05 0.0807 24 49 016365
2.10 0.0827 24 49 016421
2.20 0.0866 27 53 016422
2.30 0.0906 27 53 016423
2.35 0.0925 27 53 016368
2.40 0.0945 30 57 016424
2.50 0.0984 30 57 016425
2.60 0.1024 30 57 016426
2.70 0.1063 33 61 016427
2.80 0.1102 33 61 016428
2.90 0.1142 33 61 016429
3.00 0.1181 33 61 016430
3.10 0.1220 36 65 016431
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
3.20 0.1260 36 65 016432
3.25 0.1280 36 65 016371
3.30 0.1299 36 65 016433
3.40 0.1339 39 70 016434
3.50 0.1378 39 70 016435
3.60 0.1417 39 70 016436
3.70 0.1457 39 70 016437
3.75 0.1476 39 70 016372
3.80 0.1496 43 75 016438
4.00 0.1575 43 75 016440
4.10 0.1614 43 75 016441
4.20 0.1654 43 75 016442
4.25 0.1673 43 75 016373
4.30 0.1693 47 80 016443
4.40 0.1732 47 80 016444
4.50 0.1772 47 80 016445
4.70 0.1850 47 80 016447
4.80 0.1890 52 86 016448
5.00 0.1969 52 86 016450
5.10 0.2008 52 86 016451
5.20 0.2047 52 86 016452
5.25 0.2067 52 86 016375
5.30 0.2087 52 86 016453
5.50 0.2165 57 93 016455
5.60 0.2205 57 93 016456
5.70 0.2244 57 93 016457
5.90 0.2323 57 93 016459
6.00 0.2362 57 93 016460
6.10 0.2402 63 101 016461
6.20 0.2441 63 101 016462
6.30 0.2480 63 101 016463
6.40 0.2520 63 101 016464
6.50 0.2559 63 101 016465
6.60 0.2598 63 101 016466
ƔHeavy-Duty
Ɣ Type J
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
82 www.precisiondormer.com
2ACO
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
6.70 0.2638 63 101 016467
6.80 0.2677 69 109 016468
6.90 0.2717 69 109 016469
7.00 0.2756 69 109 016470
7.10 0.2795 69 109 016471
7.20 0.2835 69 109 016472
7.25 0.2854 69 109 016379
7.30 0.2874 69 109 016473
7.50 0.2953 69 109 016475
7.80 0.3071 75 117 016478
7.90 0.3110 75 117 016479
8.00 0.3150 75 117 016480
8.20 0.3228 75 117 016482
8.40 0.3307 75 117 016484
8.50 0.3346 75 117 016485
8.80 0.3465 81 125 016488
8.90 0.3504 81 125 016489
9.00 0.3543 81 125 016490
9.10 0.3583 81 125 016491
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
9.20 0.3622 81 125 016492
9.30 0.3661 81 125 016493
9.40 0.3701 81 125 016494
9.50 0.3740 81 125 016495
9.60 0.3780 87 133 016496
9.70 0.3819 87 133 016497
9.80 0.3858 87 133 016498
10.00 0.3937 87 133 016300
10.20 0.4016 87 133 016302
10.50 0.4134 87 133 016305
10.80 0.4252 94 142 016308
11.00 0.4331 94 142 016310
11.20 0.4409 94 142 016312
11.50 0.4528 94 142 016315
11.80 0.4646 94 142 016318
12.00 0.4724 101 151 016320
12.20 0.4803 101 151 016322
12.50 0.4921 101 151 016325
13.00 0.5118 101 151 016330
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
ƔHeavy-Duty
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 83
www.precisiondormer.com
R88CO - R89CO
R88CO
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/16 1.7/8 058704
5/64 0.0781 1/2 2“ 058705
3/32 0.0938 5/8 2.1/4 058706
7/64 0.1094 13/16 2.5/8 058707
1/8 0.1250 7/8 2.3/4 058708
9/64 0.1406 15/16 2.7/8 058709
5/32 0.1562 1“ 3.1/8 058710
11/64 0.1719 1.1/16 3.1/4 058711
3/16 0.1875 1.1/8 3.1/2 058712
13/64 0.2031 1.3/16 3.5/8 058713
7/32 0.2188 1.1/4 3.3/4 058714
15/64 0.2344 1.5/16 3.7/8 058715
1/4 0.2500 1.3/8 4“ 058716
17/64 0.2656 1.7/16 4.1/8 058717
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
9/32 0.2812 1.1/2 4.1/4 058718
19/64 0.2969 1.9/16 4.3/8 058719
5/16 0.3125 1.5/8 4.1/2 058720
21/64 0.3281 1.11/16 4.5/8 058721
11/32 0.3438 1.11/16 4.3/4 058722
23/64 0.3594 1.3/4 4.7/8 058723
3/8 0.3750 1.13/16 5“ 058724
25/64 0.3906 1.7/8 5.1/8 058725
13/32 0.4062 1.15/16 5.1/4 058726
27/64 0.4219 2“ 5.3/8 058727
7/16 0.4375 2.1/16 5.1/2 058728
29/64 0.4531 2.1/8 5.5/8 058729
15/32 0.4688 2.1/8 5.3/4 058730
31/64 0.4844 2.3/16 5.7/8 058731
1/2 0.5000 2.1/4 6“ 058732
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
52 0.0635 7/16 1.7/8 058852
51 0.0670 1/2 2“ 058851
50 0.0700 1/2 2“ 058850
49 0.0730 1/2 2“ 058849
46 0.0810 9/16 2.1/8 058846
45 0.0820 9/16 2.1/8 058845
44 0.0860 9/16 2.1/8 058844
43 0.0890 5/8 2.1/4 058843
42 0.0935 5/8 2.1/4 058842
41 0.0960 5/8 2.3/8 058841
40 0.0980 13/16 2.3/8 058840
39 0.0995 13/16 2.3/8 058839
36 0.1065 13/16 2.1/2 058836
31 0.1200 7/8 2.3/4 058831
30 0.1285 15/16 2.3/4 058830
29 0.1360 15/16 2.7/8 058829
27 0.1440 1“ 3“ 058827
26 0.1470 1“ 3“ 058826
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
25 0.1495 1“ 3“ 058825
24 0.1520 1“ 3.1/8 058824
22 0.1570 1.1/16 3.1/8 058822
21 0.1590 1.1/16 3.1/4 058821
20 0.1610 1.1/16 3.1/4 058820
16 0.1770 1.1/8 3.3/8 058816
13 0.1850 1.1/8 3.1/2 058813
12 0.1890 1.1/8 3.1/2 058812
11 0.1910 1.3/16 3.1/2 058811
10 0.1935 1.3/16 3.5/8 058810
90.1960 1.3/16 3.5/8 058809
80.1990 1.3/16 3.5/8 058808
70.2010 1.3/16 3.5/8 058807
60.2040 1.1/4 3.3/4 058806
50.2055 1.1/4 3.3/4 058805
30.2130 1.1/4 3.3/4 058803
R89CO
ƔJobber Drill Ɣ Foret court ƔBroca , serie corta
Ɣ Type D
ƔHeavy-Duty
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
84 www.precisiondormer.com
EZ10P - EZ18P
EZ10P
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/8 1.7/8 014604
5/64 0.0781 1“ 2“ 014605
3/32 0.0938 1.1/4 2.1/4 014606
7/64 0.1094 1.1/2 2.5/8 014607
1/8 0.1250 1.5/8 2.3/4 014608
9/64 0.1406 1.3/4 2.7/8 014609
5/32 0.1562 2“ 3.1/8 014610
11/64 0.1719 2.1/8 3.1/4 014611
3/16 0.1875 2.5/16 3.1/2 014612
13/64 0.2031 2.7/16 3.5/8 014613
7/32 0.2188 2.1/2 3.3/4 014614
15/64 0.2344 2.5/8 3.7/8 014615
1/4 0.2500 2.3/4 4“ 014616
17/64 0.2656 2.7/8 4.1/8 014617
9/32 0.2812 2.15/16 4.1/4 014618
19/64 0.2969 3.1/16 4.3/8 014619
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
5/16 0.3125 3.3/16 4.1/2 014620
21/64 0.3281 3.5/16 4.5/8 014621
11/32 0.3438 3.7/16 4.3/4 014622
23/64 0.3594 3.1/2 4.7/8 014623
3/8 0.3750 3.5/8 5“ 014624
25/64 0.3906 3.3/4 5.1/8 014625
13/32 0.4062 3.7/8 5.1/4 014626
27/64 0.4219 3.15/16 5.3/8 014627
7/16 0.4375 4.1/16 5.1/2 014628
29/64 0.4531 4.3/16 5.5/8 014629
15/32 0.4688 4.5/16 5.3/4 014630
31/64 0.4844 4.3/8 5.7/8 014631
1/2 0.5000 4.1/2 6“ 014632
EZ18P
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
52 0.0635 7/8 1.7/8 014752
51 0.0670 1“ 2“ 014751
50 0.0700 1“ 2“ 014750
49 0.0730 1“ 2“ 014749
48 0.0760 1“ 2“ 014748
47 0.0785 1“ 2“ 014747
46 0.0810 1.1/8 2.1/8 014746
39 0.0995 1.3/8 2.3/8 014739
36 0.1065 1.7/16 2.1/2 014736
34 0.1110 1.1/2 2.5/8 014734
33 0.1130 1.1/2 2.5/8 014733
32 0.1160 1.5/8 2.3/4 014732
31 0.1200 1.5/8 2.3/4 014731
30 0.1285 1.5/8 2.3/4 014730
29 0.1360 1.3/4 2.7/8 014729
26 0.1470 1.7/8 3“ 014726
25 0.1495 1.7/8 3“ 014725
24 0.1520 2“ 3.1/8 014724
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
23 0.1540 2“ 3.1/8 014723
21 0.1590 2.1/8 3.1/4 014721
19 0.1660 2.1/8 3.1/4 014719
18 0.1695 2.1/8 3.1/4 014718
17 0.1730 2.3/16 3.3/8 014717
16 0.1770 2.3/16 3.3/8 014716
15 0.1800 2.3/16 3.3/8 014715
14 0.1820 2.3/16 3.3/8 014714
12 0.1890 2.5/16 3.1/2 014712
10 0.1935 2.7/16 3.5/8 014710
90.1960 2.7/16 3.5/8 014709
70.2010 2.7/16 3.5/8 014707
50.2055 2.1/2 3.3/4 014705
30.2130 2.1/2 3.3/4 014703
20.2210 2.5/8 3.7/8 014702
10.2280 2.5/8 3.7/8 014701
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
ƔParabolic fl ute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 85
www.precisiondormer.com
HX10 - HX15
HX10
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/8 1.7/8 022004
5/64 0.0781 1“ 2“ 022005
3/32 0.0938 1.1/4 2.1/4 022006
7/64 0.1094 1.1/2 2.5/8 022007
1/8 0.1250 1.5/8 2.3/4 022008
9/64 0.1406 1.3/4 2.7/8 022009
5/32 0.1563 2“ 3.1/8 022010
11/64 0.1719 2.1/8 3.1/4 022011
3/16 0.1875 2.5/16 3.1/2 022012
13/64 0.2031 2.7/16 3.5/8 022013
7/32 0.2188 2.1/2 3.3/4 022014
15/64 0.2344 2.5/8 3.7/8 022015
1/4 0.2500 2.3/4 4“ 022016
17/64 0.2656 2.7/8 4.1/8 022017
9/32 0.2813 2.15/16 4.1/4 022018
19/64 0.2969 3.1/16 4.3/8 022019
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
5/16 0.3125 3.3/16 4.1/2 022020
21/64 0.3281 3.5/16 4.5/8 022021
11/32 0.3438 3.7/16 4.3/4 022022
23/64 0.3594 3.1/2 4.7/8 022023
3/8 0.3750 3.5/8 5“ 022024
25/64 0.3906 3.3/4 5.1/8 022025
13/32 0.4063 3.7/8 5.1/4 022026
27/64 0.4219 3.15/16 5.3/8 022027
7/16 0.4375 4.1/16 5.1/2 022028
29/64 0.4531 4.3/16 5.5/8 022029
15/32 0.4688 4.5/16 5.3/4 022030
31/64 0.4844 4.3/8 5.7/8 022031
1/2 0.5000 4.1/2 6“ 022032
HX15
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
A0.2340 2.5/8 3.7/8 022201
B0.2380 2.3/4 4“ 022202
C0.2420 2.3/4 4“ 022203
D0.2460 2.3/4 4“ 022204
E0.2500 2.3/4 4“ 022205
F0.2570 2.7/8 4.1/8 022206
G0.2610 2.7/8 4.1/8 022207
H0.2660 2.7/8 4.1/8 022208
I0.2720 2.7/8 4.1/8 022209
J0.2770 2.7/8 4.1/8 022210
K0.2810 2.15/16 4.1/4 022211
L0.2900 2.15/16 4.1/4 022212
M0.2950 3.1/16 4.3/8 022213
N0.3020 3.1/16 4.3/8 022214
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
O0.3160 3.3/16 4.1/2 022215
P0.3230 3.5/16 4.5/8 022216
Q0.3320 3.7/16 4.3/4 022217
R0.3390 3.7/16 4.3/4 022218
S0.3480 3.1/2 4.7/8 022219
T0.3580 3.1/2 4.7/8 022220
U0.3680 3.5/8 5“ 022221
V0.3770 3.5/8 5“ 022222
W0.3860 3.3/4 5.1/8 022223
X0.3970 3.3/4 5.1/8 022224
Y0.4040 3.7/8 5.1/4 022225
Z0.4130 3.7/8 5.1/4 022226
ƔJobber Drill Ɣ Foret court ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
86 www.precisiondormer.com
HX18
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
52 0.0635 7/8 1.7/8 022152
51 0.0670 1“ 2“ 022151
50 0.0700 1“ 2“ 022150
49 0.0730 1“ 2“ 022149
48 0.0760 1“ 2“ 022148
47 0.0785 1“ 2“ 022147
46 0.0810 1.1/8 2.1/8 022146
45 0.0820 1.1/8 2.1/8 022145
44 0.0860 1.1/8 2.1/8 022144
43 0.0890 1.1/4 2.1/4 022143
42 0.0935 1.1/4 2.1/4 022142
41 0.0960 1.3/8 2.3/8 022141
40 0.0980 1.3/8 2.3/8 022140
39 0.0995 1.3/8 2.3/8 022139
38 0.1015 1.7/16 2.1/2 022138
37 0.1040 1.7/16 2.1/2 022137
36 0.1065 1.7/16 2.1/2 022136
35 0.1100 1.1/2 2.5/8 022135
34 0.1110 1.1/2 2.5/8 022134
33 0.1130 1.1/2 2.5/8 022133
32 0.1160 1.5/8 2.3/4 022132
31 0.1200 1.5/8 2.3/4 022131
30 0.1285 1.5/8 2.3/4 022130
29 0.1360 1.3/4 2.7/8 022129
28 0.1405 1.3/4 2.7/8 022128
27 0.1440 1.7/8 3“ 022127
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
26 0.1470 1.7/8 3“ 022126
25 0.1495 1.7/8 3“ 022125
24 0.1520 2“ 3.1/8 022124
23 0.1540 2“ 3.1/8 022123
22 0.1570 2“ 3.1/8 022122
21 0.1590 2.1/8 3.1/4 022121
20 0.1610 2.1/8 3.1/4 022120
19 0.1660 2.1/8 3.1/4 022119
18 0.1695 2.1/8 3.1/4 022118
17 0.1730 2.3/16 3.3/8 022117
16 0.1770 2.3/16 3.3/8 022116
15 0.1800 2.3/16 3.3/8 022115
14 0.1820 2.3/16 3.3/8 022114
13 0.1850 2.5/16 3.1/2 022113
12 0.1890 2.5/16 3.1/2 022112
11 0.1910 2.5/16 3.1/2 022111
10 0.1935 2.7/16 3.5/8 022110
90.1960 2.7/16 3.5/8 022109
80.1990 2.7/16 3.5/8 022108
70.2010 2.7/16 3.5/8 022107
60.2040 2.1/2 3.3/4 022106
50.2055 2.1/2 3.3/4 022105
40.2090 2.1/2 3.3/4 022104
30.2130 2.1/2 3.3/4 022103
20.2210 2.5/8 3.7/8 022102
10.2280 2.5/8 3.7/8 022101
ƔJobber Drill Ɣ Foret court ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 87
www.precisiondormer.com
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/8 1.7/8 010204
5/64 0.0781 1“ 2“ 010205
3/32 0.0938 1.1/4 2.1/4 010206
7/64 0.1094 1.1/2 2.5/8 010207
1/8 0.1250 1.5/8 2.3/4 010208
9/64 0.1406 1.3/4 2.7/8 010209
5/32 0.1562 2“ 3.1/8 010210
11/64 0.1719 2.1/8 3.1/4 010211
3/16 0.1875 2.5/16 3.1/2 010212
13/64 0.2031 2.7/16 3.5/8 010213
7/32 0.2188 2.1/2 3.3/4 010214
15/64 0.2344 2.5/8 3.7/8 010215
1/4 0.2500 2.3/4 4“ 010216
17/64 0.2656 2.7/8 4.1/8 010217
9/32 0.2812 2.15/16 4.1/4 010218
19/64 0.2969 3.1/16 4.3/8 010219
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
5/16 0.3125 3.3/16 4.1/2 010220
21/64 0.3281 3.5/16 4.5/8 010221
11/32 0.3438 3.7/16 4.3/4 010222
23/64 0.3594 3.1/2 4.7/8 010223
3/8 0.3750 3.5/8 5“ 010224
25/64 0.3906 3.3/4 5.1/8 010225
13/32 0.4062 3.7/8 5.1/4 010226
27/64 0.4219 3.15/16 5.3/8 010227
7/16 0.4375 4.1/16 5.1/2 010228
29/64 0.4531 4.3/16 5.5/8 010229
15/32 0.4688 4.5/16 5.3/4 010230
31/64 0.4844 4.3/8 5.7/8 010231
1/2 0.5000 4.1/2 6“ 010232
ƔJobber Drill ƔBroca , serie corta
R10B
Ɣ Type B
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
88 www.precisiondormer.com
R18B - R15B
R18B
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2Inch l1Inch EDP # or
e-Code
52 0.0635 7/8 1.7/8 018252
51 0.0670 1“ 2“ 018251
50 0.0700 1“ 2“ 018250
49 0.0730 1“ 2“ 018249
48 0.0760 1“ 2“ 018248
47 0.0785 1“ 2“ 018247
46 0.0810 1.1/8 2.1/8 018246
45 0.0820 1.1/8 2.1/8 018245
44 0.0860 1.1/8 2.1/8 018244
43 0.0890 1.1/4 2.1/4 018243
42 0.0935 1.1/4 2.1/4 018242
41 0.0960 1.3/8 2.3/8 018241
40 0.0980 1.3/8 2.3/8 018240
39 0.0995 1.3/8 2.3/8 018239
38 0.1015 1.7/16 2.1/2 018238
37 0.1040 1.7/16 2.1/2 018237
36 0.1065 1.7/16 2.1/2 018236
35 0.1100 1.1/2 2.5/8 018235
34 0.1110 1.1/2 2.5/8 018234
33 0.1130 1.1/2 2.5/8 018233
32 0.1160 1.5/8 2.3/4 018232
31 0.1200 1.5/8 2.3/4 018231
30 0.1285 1.5/8 2.3/4 018230
29 0.1360 1.3/4 2.7/8 018229
28 0.1405 1.3/4 2.7/8 018228
27 0.1440 1.7/8 3“ 018227
d1
Ø
d1
dec.
Inch l2Inch l1Inch EDP # or
e-Code
26 0.1470 1.7/8 3“ 018226
25 0.1495 1.7/8 3“ 018225
24 0.1520 2“ 3.1/8 018224
23 0.1540 2“ 3.1/8 018223
22 0.1570 2“ 3.1/8 018222
21 0.1590 2.1/8 3.1/4 018221
20 0.1610 2.1/8 3.1/4 018220
19 0.1660 2.1/8 3.1/4 018219
18 0.1695 2.1/8 3.1/4 018218
17 0.1730 2.3/16 3.3/8 018217
16 0.1770 2.3/16 3.3/8 018216
15 0.1800 2.3/16 3.3/8 018215
14 0.1820 2.3/16 3.3/8 018214
13 0.1850 2.5/16 3.1/2 018213
12 0.1890 2.5/16 3.1/2 018212
11 0.1910 2.5/16 3.1/2 018211
10 0.1935 2.7/16 3.5/8 018210
90.1960 2.7/16 3.5/8 018209
80.1990 2.7/16 3.5/8 018208
70.2010 2.7/16 3.5/8 018207
60.2040 2.1/2 3.3/4 018206
50.2055 2.1/2 3.3/4 018205
40.2090 2.1/2 3.3/4 018204
30.2130 2.1/2 3.3/4 018203
20.2210 2.5/8 3.7/8 018202
10.2280 2.5/8 3.7/8 018201
d1Ø
Inch d1decimal
Inch l2inch l1Inch EDP #
or e-Code
A0.2340 2.5/8 3.7/8 015201
B0.2380 2.3/4 4“ 015202
C0.2420 2.3/4 4“ 015203
D0.2460 2.3/4 4“ 015204
E0.2500 2.3/4 4“ 015205
F0.2570 2.7/8 4.1/8 015206
G0.2610 2.7/8 4.1/8 015207
H0.2660 2.7/8 4.1/8 015208
I0.2720 2.7/8 4.1/8 015209
J0.2770 2.7/8 4.1/8 015210
K0.2810 2.15/16 4.1/4 015211
L0.2900 2.15/16 4.1/4 015212
d1Ø
Inch d1decimal
Inch l2inch l1Inch EDP #
or e-Code
M0.2950 3.1/16 4.3/8 015213
N0.3020 3.1/16 4.3/8 015214
O0.3160 3.3/16 4.1/2 015215
P0.3230 3.5/16 4.5/8 015216
Q0.3320 3.7/16 4.3/4 015217
R0.3390 3.7/16 4.3/4 015218
S0.3480 3.1/2 4.7/8 015219
T0.3580 3.1/2 4.7/8 015220
U0.3680 3.5/8 5“ 015221
V0.3770 3.5/8 5“ 015222
W0.3860 3.3/4 5.1/8 015223
X0.3970 3.3/4 5.1/8 015224
Y0.4040 3.7/8 5.1/4 015225
Z0.4130 3.7/8 5.1/4 015226
R15B
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ɣ Type B
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 89
www.precisiondormer.com
R10A - R18A
R10A
ŶƔ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/8 1.7/8 010104
5/64 0.0781 1“ 2“ 010105
3/32 0.0938 1.1/4 2.1/4 010106
7/64 0.1094 1.1/2 2.5/8 010107
1/8 0.1250 1.5/8 2.3/4 010108
9/64 0.1406 1.3/4 2.7/8 010109
5/32 0.1562 2.0 3.1/8 010110
11/64 0.1719 2.1/8 3.1/4 010111
3/16 0.1875 2.5/16 3.1/2 010112
13/64 0.2031 2.7/16 3.5/8 010113
7/32 0.2188 2.1/2 3.3/4 010114
15/64 0.2344 2.5/8 3.7/8 010115
1/4 0.2500 2.3/4 4“ 010116
17/64 0.2656 2.7/8 4.1/8 010117
9/32 0.2812 2.15/16 4.1/4 010118
19/64 0.2969 3.1/16 4.3/8 010119
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
5/16 0.3125 3.3/16 4.1/2 010120
21/64 0.3281 3.5/16 4.5/8 010121
11/32 0.3438 3.7/16 4.3/4 010122
23/64 0.3594 3.1/2 4.7/8 010123
3/8 0.3750 3.5/8 5“ 010124
25/64 0.3906 3.3/4 5.1/8 010125
13/32 0.4062 3.7/8 5.1/4 010126
27/64 0.4219 3.15/16 5.3/8 010127
7/16 0.4375 4.1/16 5.1/2 010128
29/64 0.4531 4.3/16 5.5/8 010129
15/32 0.4688 4.5/16 5.3/4 010130
31/64 0.4844 4.3/8 5.7/8 010131
1/2 0.5000 4.1/2 6“ 010132
R18A
d1
Ø
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
52 0.0635 7/8 1.7/8 018152
51 0.0670 1“ 2“ 018151
50 0.0700 1“ 2“ 018150
49 0.0730 1“ 2“ 018149
48 0.0760 1“ 2“ 018148
47 0.0785 1“ 2“ 018147
46 0.0810 1.1/8 2.1/8 018146
45 0.0820 1.1/8 2.1/8 018145
44 0.0860 1.1/8 2.1/8 018144
43 0.0890 1.1/4 2.1/4 018143
42 0.0935 1.1/4 2.1/4 018142
41 0.0960 1.3/8 2.3/8 018141
40 0.0980 1.3/8 2.3/8 018140
39 0.0995 1.3/8 2.3/8 018139
38 0.1015 1.7/16 2.1/2 018138
37 0.1040 1.7/16 2.1/2 018137
36 0.1065 1.7/16 2.1/2 018136
35 0.1100 1.1/2 2.5/8 018135
34 0.1110 1.1/2 2.5/8 018134
33 0.1130 1.1/2 2.5/8 018133
32 0.1160 1.5/8 2.3/4 018132
31 0.1200 1.5/8 2.3/4 018131
30 0.1285 1.5/8 2.3/4 018130
29 0.1360 1.3/4 2.7/8 018129
28 0.1405 1.3/4 2.7/8 018128
27 0.1440 1.7/8 3“ 018127
d1
Ø
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
26 0.1470 1.7/8 3“ 018126
25 0.1495 1.7/8 3“ 018125
24 0.1520 2“ 3.1/8 018124
23 0.1540 2“ 3.1/8 018123
22 0.1570 2“ 3.1/8 018122
21 0.1590 2.1/8 3.1/4 018121
20 0.1610 2.1/8 3.1/4 018120
19 0.1660 2.1/8 3.1/4 018119
18 0.1695 2.1/8 3.1/4 018118
17 0.1730 2.3/16 3.3/8 018117
16 0.1770 2.3/16 3.3/8 018116
15 0.1800 2.3/16 3.3/8 018115
14 0.1820 2.3/16 3.3/8 018114
13 0.1850 2.5/16 3.1/2 018113
12 0.1890 2.5/16 3.1/2 018112
11 0.1910 2.5/16 3.1/2 018111
10 0.1935 2.7/16 3.5/8 018110
90.1960 2.7/16 3.5/8 018109
80.1990 2.7/16 3.5/8 018108
70.2010 2.7/16 3.5/8 018107
60.2040 2.1/2 3.3/4 018106
50.2055 2.1/2 3.3/4 018105
40.2090 2.1/2 3.3/4 018104
30.2130 2.1/2 3.3/4 018103
20.2210 2.5/8 3.7/8 018102
10.2280 2.5/8 3.7/8 018101
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ɣ Type A
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
90 www.precisiondormer.com
Ɣ Foret court
R15A
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
A0.2340 2.5/8 3.7/8 015101
B0.2380 2.3/4 4“ 015102
C0.2420 2.3/4 4“ 015103
D0.2460 2.3/4 4“ 015104
E0.2500 2.3/4 4“ 015105
F0.2570 2.7/8 4.1/8 015106
G0.2610 2.7/8 4.1/8 015107
H0.2660 2.7/8 4.1/8 015108
I0.2720 2.7/8 4.1/8 015109
J0.2770 2.7/8 4.1/8 015110
K0.2810 2.15/16 4.1/4 015111
L0.2900 2.15/16 4.1/4 015112
M0.2950 3.1/16 4.3/8 015113
N0.3020 3.1/16 4.3/8 015114
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
O0.3160 3.3/16 4.1/2 015115
P0.3230 3.5/16 4.5/8 015116
Q0.3320 3.7/16 4.3/4 015117
R0.3390 3.7/16 4.3/4 015118
S0.3480 3.1/2 4.7/8 015119
T0.3580 3.1/2 4.7/8 015120
U0.3680 3.5/8 5“ 015121
V0.3770 3.5/8 5“ 015122
W0.3860 3.3/4 5.1/8 015123
X0.3970 3.3/4 5.1/8 015124
Y0.4040 3.7/8 5.1/4 015125
Z0.4130 3.7/8 5.1/4 015126
ƔJobber Drill ƔBroca , serie corta
Ɣ Type A
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 91
www.precisiondormer.com
Ɣ Foret court
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/64 0.0156 3/16 3/4 010001
1/32 0.0312 1/2 1.3/8 010002
3/64 0.0469 3/4 1.3/4 010003
1/16 0.0625 7/8 1.7/8 010004
5/64 0.0781 1“ 2“ 010005
3/32 0.0938 1.1/4 2.1/4 010006
7/64 0.1094 1.1/2 2.5/8 010007
1/8 0.1250 1.5/8 2.3/4 010008
9/64 0.1406 1.3/4 2.7/8 010009
5/32 0.1562 2“ 3.1/8 010010
11/64 0.1719 2.1/8 3.1/4 010011
3/16 0.1875 2.5/16 3.1/2 010012
13/64 0.2031 2.7/16 3.5/8 010013
7/32 0.2188 2.1/2 3.3/4 010014
15/64 0.2344 2.5/8 3.7/8 010015
1/4 0.2500 2.3/4 4“ 010016
17/64 0.2656 2.7/8 4.1/8 010017
9/32 0.2812 2.15/16 4.1/4 010018
19/64 0.2969 3.1/16 4.3/8 010019
5/16 0.3125 3.3/16 4.1/2 010020
21/64 0.3281 3.5/16 4.5/8 010021
11/32 0.3438 3.7/16 4.3/4 010022
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
23/64 0.3594 3.1/2 4.7/8 010023
3/8 0.3750 3.5/8 5“ 010024
25/64 0.3906 3.3/4 5.1/8 010025
13/32 0.4062 3.7/8 5.1/4 010026
27/64 0.4219 3.15/16 5.3/8 010027
7/16 0.4375 4.1/16 5.1/2 010028
29/64 0.4531 4.3/16 5.5/8 010029
15/32 0.4688 4.5/16 5.3/4 010030
31/64 0.4844 4.3/8 5.7/8 010031
1/2 0.5000 4.1/2 6“ 010032
33/64 0.5156 4.13/16 6.5/8 010033
17/32 0.5312 4.13/16 6.5/8 010034
35/64 0.5469 4.13/16 6.5/8 010035
9/16 0.5625 4.13/16 6.5/8 010036
37/64 0.5781 4.13/16 6.5/8 010037
19/32 0.5938 5.3/16 7.1/8 010038
39/64 0.6094 5.3/16 7.1/8 010039
5/8 0.6250 5.3/16 7.1/8 010040
41/64 0.6406 5.3/16 7.1/8 010041
21/32 0.6562 5.3/16 7.1/8 010042
43/64 0.6719 5.5/8 7.5/8 010043
11/16 0.6875 5.5/8 7.5/8 010044
ƔJobber Drill ƔBroca, serie corta
R10
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
92 www.precisiondormer.com
12 0.1890 2.5/16 3.1/2 018012
11 0.1910 2.5/16 3.1/2 018011
10 0.1935 2.7/16 3.5/8 018010
90.1960 2.7/16 3.5/8 018009
80.1990 2.7/16 3.5/8 018008
70.2010 2.7/16 3.5/8 018007
60.2040 2.1/2 3.3/4 018006
50.2055 2.1/2 3.3/4 018005
40.2090 2.1/2 3.3/4 018004
30.2130 2.1/2 3.3/4 018003
20.2210 2.5/8 3.7/8 018002
10.2280 2.5/8 3.7/8 018001
R18
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
80 0.0135 1/8 3/4 018080
79 0.0145 1/8 3/4 018079
78 0.0160 3/16 7/8 018078
77 0.0180 3/16 7/8 018077
76 0.0200 3/16 7/8 018076
75 0.0210 1/4 1“ 018075
74 0.0225 1/4 1“ 018074
73 0.0240 5/16 1.1/8 018073
72 0.0250 5/16 1.1/8 018072
71 0.0260 3/8 1.1/4 018071
70 0.0280 3/8 1.1/4 018070
69 0.0292 1/2 1.3/8 018069
68 0.0310 1/2 1.3/8 018068
67 0.0320 1/2 1.3/8 018067
66 0.0330 1/2 1.3/8 018066
65 0.0350 5/8 1.1/2 018065
64 0.0360 5/8 1.1/2 018064
63 0.0370 5/8 1.1/2 018063
62 0.0380 5/8 1.1/2 018062
61 0.0390 11/16 1.5/8 018061
60 0.0400 11/16 1.5/8 018060
59 0.0410 11/16 1.5/8 018059
58 0.0420 11/16 1.5/8 018058
57 0.0430 3/4 1.3/4 018057
56 0.0465 3/4 1.3/4 018056
55 0.0520 7/8 1.7/8 018055
54 0.0550 7/8 1.7/8 018054
53 0.0595 7/8 1.7/8 018053
52 0.0635 7/8 1.7/8 018052
51 0.0670 1“ 2“ 018051
50 0.0700 1“ 2“ 018050
49 0.0730 1“ 2“ 018049
48 0.0760 1“ 2“ 018048
47 0.0785 1“ 2“ 018047
46 0.0810 1.1/8 2.1/8 018046
45 0.0820 1.1/8 2.1/8 018045
44 0.0860 1.1/8 2.1/8 018044
43 0.0890 1.1/4 2.1/4 018043
42 0.0935 1.1/4 2.1/4 018042
41 0.0960 1.3/8 2.3/8 018041
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
40 0.0980 1.3/8 2.3/8 018040
39 0.0995 1.3/8 2.3/8 018039
38 0.1015 1.7/16 2.1/2 018038
37 0.1040 1.7/16 2.1/2 018037
36 0.1065 1.7/16 2.1/2 018036
35 0.1100 1.1/2 2.5/8 018035
34 0.1110 1.1/2 2.5/8 018034
33 0.1130 1.1/2 2.5/8 018033
32 0.1160 1.5/8 2.3/4 018032
31 0.1200 1.5/8 2.3/4 018031
30 0.1285 1.5/8 2.3/4 018030
29 0.1360 1.3/4 2.7/8 018029
28 0.1405 1.3/4 2.7/8 018028
27 0.1440 1.7/8 3“ 018027
26 0.1470 1.7/8 3“ 018026
25 0.1495 1.7/8 3“ 018025
24 0.1520 2“ 3.1/8 018024
23 0.1540 2“ 3.1/8 018023
22 0.1570 2“ 3.1/8 018022
21 0.1590 2.1/8 3.1/4 018021
20 0.1610 2.1/8 3.1/4 018020
19 0.1660 2.1/8 3.1/4 018019
18 0.1695 2.1/8 3.1/4 018018
17 0.1730 2.3/16 3.3/8 018017
16 0.1770 2.3/16 3.3/8 018016
15 0.1800 2.3/16 3.3/8 018015
14 0.1820 2.3/16 3.3/8 018014
13 0.1850 2.5/16 3.1/2 018013
ƔJobber Drill Ɣ Foret court ƔBroca , serie corta
Ŷ
Ɣ
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 93
www.precisiondormer.com
R15
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
A0.2340 2.5/8 3.7/8 015001
B0.2380 2.3/4 4“ 015002
C0.2420 2.3/4 4“ 015003
D0.2460 2.3/4 4“ 015004
E0.2500 2.3/4 4“ 015005
F0.2570 2.7/8 4.1/8 015006
G0.2610 2.7/8 4.1/8 015007
H0.2660 2.7/8 4.1/8 015008
I0.2720 2.7/8 4.1/8 015009
J0.2770 2.7/8 4.1/8 015010
K0.2810 2.15/16 4.1/4 015011
L0.2900 2.15/16 4.1/4 015012
M0.2950 3.1/16 4.3/8 015013
N0.3020 3.1/16 4.3/8 015014
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
O0.3160 3.3/16 4.1/2 015015
P0.3230 3.5/16 4.5/8 015016
Q0.3320 3.7/16 4.3/4 015017
R0.3390 3.7/16 4.3/4 015018
S0.3480 3.1/2 4.7/8 015019
T0.3580 3.1/2 4.7/8 015020
U0.3680 3.5/8 5“ 015021
V0.3770 3.5/8 5“ 015022
W0.3860 3.3/4 5.1/8 015023
X0.3970 3.3/4 5.1/8 015024
Y0.4040 3.7/8 5.1/4 015025
Z0.4130 3.7/8 5.1/4 015026
ƔJobber Drill Ɣ Foret court ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
94 www.precisiondormer.com
2AB
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
1.00 0.0394 12.0 34 029010
1.10 0.0433 14.0 36 029011
1.15 0.0453 14.0 36 029256
1.20 0.0472 16.0 38 029012
1.25 0.0492 16.0 38 029257
1.30 0.0512 16.0 38 029013
1.35 0.0531 18.0 40 029258
1.40 0.0551 18.0 40 029014
1.45 0.0571 18.0 40 029259
1.50 0.0591 18.0 40 029015
1.55 0.0610 20.0 43 029260
1.60 0.0630 20.0 43 029016
1.70 0.0669 20.0 43 029017
1.75 0.0689 22.0 46 029262
1.80 0.0709 22.0 46 029018
1.90 0.0748 22.0 46 029019
1.95 0.0768 24.0 49 029264
2.00 0.0787 24.0 49 029020
2.10 0.0827 24.0 49 029021
2.20 0.0866 27.0 53 029022
2.30 0.0906 27.0 53 029023
2.35 0.0925 27.0 53 029268
2.40 0.0945 30.0 57 029024
2.50 0.0984 30.0 57 029025
2.60 0.1024 30.0 57 029026
2.70 0.1063 33.0 61 029027
2.90 0.1142 33.0 61 029029
3.00 0.1181 33.0 61 029030
3.10 0.1220 36.0 65 029031
3.20 0.1260 36.0 65 029032
3.25 0.1280 36.0 65 029271
3.30 0.1299 36.0 65 029033
3.40 0.1339 39.0 70 029034
3.50 0.1378 39.0 70 029035
3.60 0.1417 39.0 70 029036
3.70 0.1457 39.0 70 029037
4.00 0.1575 43.0 75 029040
4.10 0.1614 43.0 75 029041
4.20 0.1654 43.0 75 029042
4.30 0.1693 47.0 80 029043
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
4.40 0.1732 47.0 80 029044
4.50 0.1772 47.0 80 029045
4.60 0.1811 47.0 80 029046
4.80 0.1890 52.0 86 029048
5.00 0.1969 52.0 86 029050
5.10 0.2008 52.0 86 029051
5.20 0.2047 52.0 86 029052
5.30 0.2087 52.0 86 029053
5.40 0.2126 57.0 93 029054
5.50 0.2165 57.0 93 029055
5.60 0.2205 57.0 93 029056
5.70 0.2244 57.0 93 029057
5.75 0.2264 57.0 93 029276
5.80 0.2283 57.0 93 029058
6.00 0.2362 57.0 93 029060
6.10 0.2402 63.0 101 029061
6.20 0.2441 63.0 101 029062
6.30 0.2480 63.0 101 029063
6.40 0.2520 63.0 101 029064
6.50 0.2559 63.0 101 029065
6.60 0.2598 63.0 101 029066
6.70 0.2638 63.0 101 029067
6.75 0.2657 69.0 109 029278
6.80 0.2677 69.0 109 029068
7.00 0.2756 69.0 109 029070
7.20 0.2835 69.0 109 029072
7.25 0.2854 69.0 109 029279
7.30 0.2874 69.0 109 029073
7.40 0.2913 69.0 109 029074
7.50 0.2953 69.0 109 029075
7.60 0.2992 75.0 117 029076
7.80 0.3071 75.0 117 029078
7.90 0.3110 75.0 117 029079
8.00 0.3150 75.0 117 029080
8.10 0.3189 75.0 117 029081
8.20 0.3228 75.0 117 029082
8.25 0.3248 75.0 117 029282
8.40 0.3307 75.0 117 029084
8.50 0.3346 75.0 117 029085
8.60 0.3386 81.0 125 029086
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 95
www.precisiondormer.com
2AB - 2A
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
8.70 0.3425 81.0 125 029087
8.75 0.3445 81.0 125 029283
8.80 0.3465 81.0 125 029088
8.90 0.3504 81.0 125 029089
9.00 0.3543 81.0 125 029090
9.30 0.3661 81.0 125 029093
9.40 0.3701 81.0 125 029094
9.50 0.3740 81.0 125 029095
9.60 0.3780 87.0 133 029096
9.70 0.3819 87.0 133 029097
9.80 0.3858 87.0 133 029098
9.90 0.3898 87.0 133 029099
10.00 0.3937 87.0 133 029100
10.20 0.4016 87.0 133 029102
10.30 0.4055 87.0 133 029103
10.50 0.4134 87.0 133 029105
10.80 0.4252 94.0 142 029108
10.90 0.4291 94.0 142 029109
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
11.00 0.4331 94.0 142 029110
11.20 0.4409 94.0 142 029112
11.30 0.4449 94.0 142 029113
11.40 0.4488 94.0 142 029114
11.50 0.4528 94.0 142 029115
11.70 0.4606 94.0 142 029117
11.80 0.4646 94.0 142 029118
12.00 0.4724 101.0 151 029120
12.10 0.4764 101.0 151 029121
12.20 0.4803 101.0 151 029122
12.50 0.4921 101.0 151 029125
12.70 0.5000 101.0 151 029127
12.80 0.5039 101.0 151 029128
12.90 0.5079 101.0 151 029129
13.00 0.5118 101.0 151 029130
13.50 0.5315 108.0 160 016135
14.00 0.5512 108.0 160 016140
14.50 0.5709 114.0 169 016145
15.00 0.5906 114.0 169 016150
2A
Ŷ
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
0.15 0.0059 1.5 19 016215
0.16 0.0063 1.5 19 016216
0.17 0.0067 1.5 19 016217
0.18 0.0071 1.5 19 016218
0.19 0.0075 1.5 19 016219
0.20 0.0079 2.5 19 016002
0.21 0.0083 2.5 19 016221
0.22 0.0087 2.5 19 016222
0.23 0.0091 2.5 19 016223
0.24 0.0094 2.5 19 016224
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
0.25 0.0098 3.0 19 016225
0.26 0.0102 3.0 19 016226
0.27 0.0106 3.0 19 016227
0.28 0.0110 3.0 19 016228
0.29 0.0114 3.0 19 016229
0.30 0.0118 3.0 19 016003
0.32 0.0126 4.0 19 016232
0.44 0.0173 5.0 20 016244
Ɣ
ƔJobber Drill Ɣ Foret court ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
96 www.precisiondormer.com
2A
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
0.45 0.0177 5.0 20 016245
0.46 0.0181 5.0 20 016246
0.48 0.0189 5.0 20 016248
0.50 0.0197 6.0 22 016005
0.55 0.0217 7.0 24 016250
0.60 0.0236 7.0 24 016006
0.65 0.0256 8.0 26 016251
0.70 0.0276 9.0 28 016007
0.75 0.0295 9.0 28 016252
0.80 0.0315 10.0 30 016008
0.85 0.0335 10.0 30 016253
0.90 0.0354 11.0 32 016009
0.95 0.0374 11.0 32 016254
1.00 0.0394 12.0 34 016010
1.10 0.0433 14.0 36 016011
1.15 0.0453 14.0 36 016256
1.20 0.0472 16.0 38 016012
1.25 0.0492 16.0 38 016257
1.30 0.0512 16.0 38 016013
1.35 0.0531 18.0 40 016258
1.40 0.0551 18.0 40 016014
1.45 0.0571 18.0 40 016259
1.50 0.0591 18.0 40 016015
1.55 0.0610 20.0 43 016260
1.60 0.0630 20.0 43 016016
1.65 0.0650 20.0 43 016261
1.70 0.0669 20.0 43 016017
1.75 0.0689 22.0 46 016262
1.80 0.0709 22.0 46 016018
1.90 0.0748 22.0 46 016019
1.95 0.0768 24.0 49 016264
2.00 0.0787 24.0 49 016020
2.10 0.0827 24.0 49 016021
2.15 0.0846 27.0 53 016266
2.20 0.0866 27.0 53 016022
2.25 0.0886 27.0 53 016267
2.30 0.0906 27.0 53 016023
2.35 0.0925 27.0 53 016268
2.40 0.0945 30.0 57 016024
2.50 0.0984 30.0 57 016025
2.60 0.1024 30.0 57 016026
2.70 0.1063 33.0 61 016027
2.75 0.1083 33.0 61 016270
2.90 0.1142 33.0 61 016029
3.00 0.1181 33.0 61 016030
3.10 0.1220 36.0 65 016031
3.20 0.1260 36.0 65 016032
3.25 0.1280 36.0 65 016271
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
4.50 0.1772 47.0 80 016045
4.60 0.1811 47.0 80 016046
4.80 0.1890 52.0 86 016048
5.00 0.1969 52.0 86 016050
5.10 0.2008 52.0 86 016051
5.20 0.2047 52.0 86 016052
5.30 0.2087 52.0 86 016053
5.40 0.2126 57.0 93 016054
5.50 0.2165 57.0 93 016055
5.60 0.2205 57.0 93 016056
5.70 0.2244 57.0 93 016057
5.75 0.2264 57.0 93 016276
5.80 0.2283 57.0 93 016058
6.00 0.2362 57.0 93 016060
6.10 0.2402 63.0 101 016061
6.20 0.2441 63.0 101 016062
6.30 0.2480 63.0 101 016063
6.40 0.2520 63.0 101 016064
6.50 0.2559 63.0 101 016065
6.60 0.2598 63.0 101 016066
6.70 0.2638 63.0 101 016067
6.75 0.2657 69.0 109 016278
6.80 0.2677 69.0 109 016068
7.00 0.2756 69.0 109 016070
7.20 0.2835 69.0 109 016072
7.25 0.2854 69.0 109 016279
7.30 0.2874 69.0 109 016073
7.40 0.2913 69.0 109 016074
7.50 0.2953 69.0 109 016075
7.60 0.2992 75.0 117 016076
7.80 0.3071 75.0 117 016078
7.85 0.3091 75.0 117 029281
7.90 0.3110 75.0 117 016079
8.00 0.3150 75.0 117 016080
8.10 0.3189 75.0 117 016081
8.20 0.3228 75.0 117 016082
8.25 0.3248 75.0 117 016282
8.40 0.3307 75.0 117 016084
8.50 0.3346 75.0 117 016085
8.60 0.3386 81.0 125 016086
8.70 0.3425 81.0 125 016087
8.75 0.3445 81.0 125 016283
8.80 0.3465 81.0 125 016088
8.90 0.3504 81.0 125 016089
9.00 0.3543 81.0 125 016090
9.30 0.3661 81.0 125 016093
9.40 0.3701 81.0 125 016094
9.50 0.3740 81.0 125 016095
9.60 0.3780 87.0 133 016096
9.70 0.3819 87.0 133 016097
9.80 0.3858 87.0 133 016098
9.90 0.3898 87.0 133 016099
10.00 0.3937 87.0 133 016100
10.20 0.4016 87.0 133 016102
10.30 0.4055 87.0 133 016103
10.50 0.4134 87.0 133 016105
3.30 0.1299 36.0 65 016033
3.40 0.1339 39.0 70 016034
3.50 0.1378 39.0 70 016035
3.60 0.1417 39.0 70 016036
3.70 0.1457 39.0 70 016037
4.00 0.1575 43.0 75 016040
4.10 0.1614 43.0 75 016041
4.20 0.1654 43.0 75 016042
4.30 0.1693 47.0 80 016043
4.40 0.1732 47.0 80 016044
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 97
www.precisiondormer.com
Ɣ Foret court
R10P
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/64 0.0156 3/16 3/4 010601
1/32 0.0312 1/2 1.3/8 010602
3/64 0.0469 3/4 1.3/4 010603
1/16 0.0625 7/8 1.7/8 010604
5/64 0.0781 1“ 2“ 010605
3/32 0.0938 1.1/4 2.1/4 010606
7/64 0.1094 1.1/2 2.5/8 010607
1/8 0.1250 1.5/8 2.3/4 010608
9/64 0.1406 1.3/4 2.7/8 010609
5/32 0.1562 2“ 3.1/8 010610
11/64 0.1719 2.1/8 3.1/4 010611
3/16 0.1875 2.5/16 3.1/2 010612
13/64 0.2031 2.7/16 3.5/8 010613
7/32 0.2188 2.1/2 3.3/4 010614
15/64 0.2344 2.5/8 3.7/8 010615
1/4 0.2500 2.3/4 4“ 010616
17/64 0.2656 2.7/8 4.1/8 010617
9/32 0.2812 2.15/16 4.1/4 010618
19/64 0.2969 3.1/16 4.3/8 010619
5/16 0.3125 3.3/16 4.1/2 010620
21/64 0.3281 3.5/16 4.5/8 010621
11/32 0.3438 3.7/16 4.3/4 010622
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
23/64 0.3594 3.1/2 4.7/8 010623
3/8 0.3750 3.5/8 5“ 010624
25/64 0.3906 3.3/4 5.1/8 010625
13/32 0.4062 3.7/8 5.1/4 010626
27/64 0.4219 3.15/16 5.3/8 010627
7/16 0.4375 4.1/16 5.1/2 010628
29/64 0.4531 4.3/16 5.5/8 010629
15/32 0.4688 4.5/16 5.3/4 010630
31/64 0.4844 4.3/8 5.7/8 010631
1/2 0.5000 4.1/2 6“ 010632
33/64 0.5156 4.13/16 6.5/8 010633
17/32 0.5312 4.13/16 6.5/8 010634
35/64 0.5469 4.13/16 6.5/8 010635
9/16 0.5625 4.13/16 6.5/8 010636
37/64 0.5781 4.13/16 6.5/8 010637
19/32 0.5938 5.3/16 7.1/8 010638
39/64 0.6094 5.3/16 7.1/8 010639
5/8 0.6250 5.3/16 7.1/8 010640
41/64 0.6406 5.3/16 7.1/8 010641
21/32 0.6562 5.3/16 7.1/8 010642
43/64 0.6719 5.5/8 7.5/8 010643
11/16 0.6875 5.5/8 7.5/8 010644
ƔJobber Drill ƔBroca , serie corta
2A - R10P
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
10.60 0.4173 87.0 133 016106
10.80 0.4252 94.0 142 016108
10.90 0.4291 94.0 142 016109
11.00 0.4331 94.0 142 016110
11.20 0.4409 94.0 142 016112
11.30 0.4449 94.0 142 016113
11.40 0.4488 94.0 142 016114
11.50 0.4528 94.0 142 016115
11.70 0.4606 94.0 142 016117
11.80 0.4646 94.0 142 016118
12.00 0.4724 101.0 151 016120
12.10 0.4764 101.0 151 016121
12.20 0.4803 101.0 151 016122
12.50 0.4921 101.0 151 016125
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
12.70 0.5000 101.0 151 016127
12.80 0.5039 101.0 151 016128
12.90 0.5079 101.0 151 016129
13.00 0.5118 101.0 151 016130
13.50 0.5315 108.0 160 034135
14.00 0.5512 108.0 160 034140
14.50 0.5709 114.0 169 034145
15.00 0.5906 114.0 169 034150
15.50 0.6102 120.0 178 016155
16.00 0.6299 120.0 178 016160
16.50 0.6496 125.0 184 016165
17.00 0.6693 125.0 184 016170
17.50 0.6890 130.0 191 016175
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
98 www.precisiondormer.com
R18P
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
97 0.0059 1/16 3/4 018697
96 0.0063 1/16 3/4 018696
95 0.0067 1/16 3/4 018695
94 0.0071 1/16 3/4 018694
93 0.0075 1/16 3/4 018693
92 0.0079 1/16 3/4 018692
91 0.0083 5/64 3/4 018691
90 0.0087 5/64 3/4 018690
89 0.0091 5/64 3/4 018689
88 0.0095 5/64 3/4 018688
87 0.0100 5/64 3/4 018687
86 0.0105 3/32 3/4 018686
85 0.0110 3/32 3/4 018685
84 0.0115 3/32 3/4 018684
83 0.0120 3/32 3/4 018683
82 0.0125 3/32 3/4 018682
81 0.0130 3/32 3/4 018681
80 0.0135 1/8 3/4 018680
79 0.0145 1/8 3/4 018679
78 0.0160 3/16 7/8 018678
77 0.0180 3/16 7/8 018677
76 0.0200 3/16 7/8 018676
75 0.0210 1/4 1“ 018675
74 0.0225 1/4 1“ 018674
73 0.0240 5/16 1.1/8 018673
72 0.0250 5/16 1.1/8 018672
71 0.0260 3/8 1.1/4 018671
70 0.0280 3/8 1.1/4 018670
69 0.0292 1/2 1.3/8 018669
68 0.0310 1/2 1.3/8 018668
67 0.0320 1/2 1.3/8 018667
66 0.0330 1/2 1.3/8 018666
65 0.0350 5/8 1.1/2 018665
64 0.0360 5/8 1.1/2 018664
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
63 0.0370 5/8 1.1/2 018663
62 0.0380 5/8 1.1/2 018662
61 0.0390 11/16 1.5/8 018661
60 0.0400 11/16 1.5/8 018660
59 0.0410 11/16 1.5/8 018659
58 0.0420 11/16 1.5/8 018658
57 0.0430 3/4 1.3/4 018657
56 0.0465 3/4 1.3/4 018656
55 0.0520 7/8 1.7/8 018655
54 0.0550 7/8 1.7/8 018654
53 0.0595 7/8 1.7/8 018653
52 0.0635 7/8 1.7/8 018652
51 0.0670 1“ 2“ 018651
50 0.0700 1“ 2“ 018650
49 0.0730 1“ 2“ 018649
48 0.0760 1“ 2“ 018648
47 0.0785 1“ 2“ 018647
46 0.0810 1.1/8 2.1/8 018646
45 0.0820 1.1/8 2.1/8 018645
44 0.0860 1.1/8 2.1/8 018644
43 0.0890 1.1/4 2.1/4 018643
42 0.0935 1.1/4 2.1/4 018642
41 0.0960 1.3/8 2.3/8 018641
40 0.0980 1.3/8 2.3/8 018640
39 0.0995 1.3/8 2.3/8 018639
38 0.1015 1.7/16 2.1/2 018638
37 0.1040 1.7/16 2.1/2 018637
36 0.1065 1.7/16 2.1/2 018636
35 0.1100 1.1/2 2.5/8 018635
34 0.1110 1.1/2 2.5/8 018634
33 0.1130 1.1/2 2.5/8 018633
32 0.1160 1.5/8 2.3/4 018632
31 0.1200 1.5/8 2.3/4 018631
30 0.1285 1.5/8 2.3/4 018630
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 99
www.precisiondormer.com
R18P - R15P
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
29 0.1360 1.3/4 2.7/8 018629
28 0.1405 1.3/4 2.7/8 018628
27 0.1440 1.7/8 3“ 018627
26 0.1470 1.7/8 3“ 018626
25 0.1495 1.7/8 3“ 018625
24 0.1520 2“ 3.1/8 018624
23 0.1540 2“ 3.1/8 018623
22 0.1570 2“ 3.1/8 018622
21 0.1590 2.1/8 3.1/4 018621
20 0.1610 2.1/8 3.1/4 018620
19 0.1660 2.1/8 3.1/4 018619
18 0.1695 2.1/8 3.1/4 018618
17 0.1730 2.3/16 3.3/8 018617
16 0.1770 2.3/16 3.3/8 018616
15 0.1800 2.3/16 3.3/8 018615
14 0.1820 2.3/16 3.3/8 018614
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
13 0.1850 2.5/16 3.1/2 018613
12 0.1890 2.5/16 3.1/2 018612
11 0.1910 2.5/16 3.1/2 018611
10 0.1935 2.7/16 3.5/8 018610
90.1960 2.7/16 3.5/8 018609
80.1990 2.7/16 3.5/8 018608
70.2010 2.7/16 3.5/8 018607
60.2040 2.1/2 3.3/4 018606
50.2055 2.1/2 3.3/4 018605
40.2090 2.1/2 3.3/4 018604
30.2130 2.1/2 3.3/4 018603
20.2210 2.5/8 3.7/8 018602
10.2280 2.5/8 3.7/8 018601
Ɣ Foret court
R15P
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
A0.2340 2.5/8 3.7/8 015601
B0.2380 2.3/4 4“ 015602
C0.2420 2.3/4 4“ 015603
D0.2460 2.3/4 4“ 015604
E0.2500 2.3/4 4“ 015605
F0.2570 2.7/8 4.1/8 015606
G0.2610 2.7/8 4.1/8 015607
H0.2660 2.7/8 4.1/8 015608
I0.2720 2.7/8 4.1/8 015609
J0.2770 2.7/8 4.1/8 015610
K0.2810 2.15/16 4.1/4 015611
L0.2900 2.15/16 4.1/4 015612
M0.2950 3.1/16 4.3/8 015613
N0.3020 3.1/16 4.3/8 015614
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
O0.3160 3.3/16 4.1/2 015615
P0.3230 3.5/16 4.5/8 015616
Q0.3320 3.7/16 4.3/4 015617
R0.3390 3.7/16 4.3/4 015618
S0.3480 3.1/2 4.7/8 015619
T0.3580 3.1/2 4.7/8 015620
U0.3680 3.5/8 5“ 015621
V0.3770 3.5/8 5“ 015622
W0.3860 3.3/4 5.1/8 015623
X0.3970 3.3/4 5.1/8 015624
Y0.4040 3.7/8 5.1/4 015625
Z0.4130 3.7/8 5.1/4 015626
ƔJobber Drill ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
100 www.precisiondormer.com
6.30 0.2480 70 102 031063
6.40 0.2520 73 105 031064
6.50 0.2559 73 105 031065
6.60 0.2598 73 105 031066
6.70 0.2638 73 105 031067
6.80 0.2677 73 105 031068
6.90 0.2717 73 105 031069
7.00 0.2756 73 105 031070
7.10 0.2795 75 108 031071
7.20 0.2835 75 108 031072
7.30 0.2874 75 108 031073
7.40 0.2913 78 111 031074
Ɣ Foret court
R10PM
Ŷ
Ɣ
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
0.50 0.0197 5 22 031005
0.60 0.0236 8 29 031006
0.70 0.0276 11 32 031007
0.80 0.0315 13 35 031008
0.85 0.0335 16 38 031253
0.90 0.0354 16 38 031009
1.00 0.0394 17 41 031010
1.05 0.0413 17 41 031255
1.10 0.0433 19 44 031011
1.15 0.0453 19 44 031256
1.20 0.0472 22 48 031012
1.25 0.0492 22 48 031257
1.30 0.0512 22 48 031013
1.35 0.0531 22 48 031258
1.40 0.0551 22 48 031014
1.45 0.0571 22 48 031259
1.50 0.0591 22 48 031015
1.55 0.0610 22 48 031260
1.60 0.0630 22 48 031016
1.70 0.0669 25 51 031017
1.75 0.0689 25 51 031262
1.80 0.0709 25 51 031018
1.85 0.0728 25 51 031263
1.90 0.0748 25 51 031019
1.95 0.0768 25 51 031264
2.00 0.0787 25 51 031020
2.05 0.0807 29 54 031265
2.10 0.0827 29 54 031021
2.20 0.0866 32 57 031022
2.30 0.0906 32 57 031023
2.40 0.0945 35 60 031024
2.50 0.0984 35 60 031025
2.60 0.1024 37 64 031026
2.70 0.1063 37 64 031027
2.80 0.1102 38 67 031028
3.00 0.1181 41 70 031030
3.10 0.1220 41 70 031031
3.20 0.1260 41 70 031032
3.30 0.1299 44 73 031033
3.40 0.1339 44 73 031034
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
3.50 0.1378 44 73 031035
3.60 0.1417 48 76 031036
3.70 0.1457 48 76 031037
3.80 0.1496 48 76 031038
3.90 0.1535 51 79 031039
4.00 0.1575 54 83 031040
4.10 0.1614 54 83 031041
4.20 0.1654 54 83 031042
4.30 0.1693 54 83 031043
4.40 0.1732 56 86 031044
4.50 0.1772 56 86 031045
4.60 0.1811 56 86 031046
4.70 0.1850 59 89 031047
4.80 0.1890 59 89 031048
4.90 0.1929 62 92 031049
5.00 0.1969 62 92 031050
5.10 0.2008 62 92 031051
5.20 0.2047 64 95 031052
5.30 0.2087 64 95 031053
5.40 0.2126 64 95 031054
5.50 0.2165 64 95 031055
5.60 0.2205 67 98 031056
5.70 0.2244 67 98 031057
5.80 0.2283 67 98 031058
5.90 0.2323 67 98 031059
6.00 0.2362 70 102 031060
6.10 0.2402 70 102 031061
6.20 0.2441 70 102 031062
ƔJobber Drill ƔBroca , serie corta
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 101
www.precisiondormer.com
R10PM
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
7.50 0.2953 78 111 031075
7.60 0.2992 78 111 031076
7.70 0.3031 81 114 031077
7.80 0.3071 81 114 031078
7.90 0.3110 81 114 031079
8.00 0.3150 81 114 031080
8.10 0.3189 84 117 031081
8.20 0.3228 84 117 031082
8.30 0.3268 84 117 031083
8.40 0.3307 87 121 031084
8.50 0.3346 87 121 031085
8.60 0.3386 87 121 031086
8.70 0.3425 87 121 031087
8.80 0.3465 89 124 031088
8.90 0.3504 89 124 031089
9.00 0.3543 89 124 031090
9.10 0.3583 89 124 031091
9.20 0.3622 92 127 031092
9.30 0.3661 92 127 031093
9.40 0.3701 92 127 031094
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
9.50 0.3740 92 127 031095
9.60 0.3780 95 130 031096
9.70 0.3819 95 130 031097
9.80 0.3858 95 130 031098
9.90 0.3898 95 130 031099
10.00 0.3937 95 130 031100
10.20 0.4016 98 133 031102
10.50 0.4134 98 133 031105
11.00 0.4331 103 140 031110
11.20 0.4409 106 143 031112
11.50 0.4528 106 143 031115
12.00 0.4724 111 149 031120
12.50 0.4921 114 152 031125
13.00 0.5118 114 152 031130
13.50 0.5315 122 168 031135
14.00 0.5512 122 168 031140
15.00 0.5906 132 181 031150
16.00 0.6299 132 181 031160
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
102 www.precisiondormer.com
Ɣ Foret court
R08
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/8 0.1250 1.5/8 2.3/4 017508
30 0.1285 1.5/8 2.3/4 017630
29 0.1360 1.3/4 2.7/8 017629
9/64 0.1406 1.3/4 2.7/8 017509
24 0.1520 2“ 3.1/8 017624
5/32 0.1562 2“ 3.1/8 017510
20 0.1610 2.1/8 3.1/4 017620
19 0.1660 2.1/8 3.1/4 017619
18 0.1695 2.1/8 3.1/4 017618
11/64 0.1719 2.1/8 3.1/4 017511
17 0.1730 2.3/16 3.3/8 017617
16 0.1770 2.3/16 3.3/8 017616
15 0.1800 2.3/16 3.3/8 017615
13 0.1850 2.5/16 3.1/2 017613
3/16 0.1875 2.5/16 3.1/2 017512
11 0.1910 2.5/16 3.1/2 017611
10 0.1935 2.7/16 3.5/8 017610
13/64 0.2031 2.7/16 3.5/8 017513
30.2130 2.1/2 3.3/4 017603
7/32 0.2188 2.1/2 3.3/4 017514
10.2280 2.5/8 3.7/8 017601
15/64 0.2344 2.5/8 3.7/8 017515
1/4 0.2500 2.3/4 4“ 017516
F0.2570 2.7/8 4.1/8 017706
G0.2610 2.7/8 4.1/8 017707
17/64 0.2656 2.7/8 4.1/8 017517
I0.2720 2.7/8 4.1/8 017709
J0.2770 2.7/8 4.1/8 017710
9/32 0.2812 2.15/16 4.1/4 017518
19/64 0.2969 3.1/16 4.3/8 017519
5/16 0.3125 3.3/16 4.1/2 017520
O0.3160 3.3/16 4.1/2 017715
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
P0.3230 3.5/16 4.5/8 017716
21/64 0.3281 3.5/16 4.5/8 017521
Q0.3320 3.7/16 4.3/4 017717
R0.3390 3.7/16 4.3/4 017718
11/32 0.3438 3.7/16 4.3/4 017522
S0.3480 3.1/2 4.7/8 017719
23/64 0.3594 3.1/2 4.7/8 017523
U0.3680 3.5/8 5“ 017721
3/8 0.3750 3.5/8 5“ 017524
W0.3860 3.3/4 5.1/8 017723
25/64 0.3906 3.3/4 5.1/8 017525
X0.3970 3.3/4 5.1/8 017724
13/32 0.4062 3.7/8 5.1/4 017526
27/64 0.4219 3.15/16 5.3/8 017527
7/16 0.4375 4.1/16 5.1/2 017528
29/64 0.4531 4.3/16 5.5/8 017529
15/32 0.4688 4.5/16 5.3/4 017530
31/64 0.4844 4.3/8 5.7/8 017531
1/2 0.5000 4.1/2 6“ 017532
33/64 0.5156 4.13/16 6.5/8 017533
17/32 0.5312 4.13/16 6.5/8 017534
35/64 0.5469 4.13/16 6.5/8 017535
9/16 0.5625 4.13/16 6.5/8 017536
37/64 0.5781 4.13/16 6.5/8 017537
19/32 0.5938 5.3/16 7.1/8 017538
39/64 0.6094 5.3/16 7.1/8 017539
5/8 0.6250 5.3/16 7.1/8 017540
41/64 0.6406 5.3/16 7.1/8 017541
21/32 0.6562 5.3/16 7.1/8 017542
43/64 0.6719 5.5/8 7.5/8 017543
11/16 0.6875 5.5/8 7.5/8 017544
ƔJobber Drill ƔBroca, serie corta
Ɣ Automotive, tanged shank
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 103
www.precisiondormer.com
Ɣ Foret court
d1
Ø
Inch d1dec.
Inch l2
Inch l1
Inch EDP #
or e-Code
9/32 0.2812 2.15/16 4.1/4 010518
19/64 0.2969 3.1/16 4.3/8 010519
5/16 0.3125 3.3/16 4.1/2 010520
21/64 0.3281 3.5/16 4.5/8 010521
11/32 0.3438 3.7/16 4.3/4 010522
23/64 0.3594 3.1/2 4.7/8 010523
3/8 0.3750 3.5/8 5“ 010524
25/64 0.3906 3.3/4 5.1/8 010525
13/32 0.4062 3.7/8 5.1/4 010526
27/64 0.4219 3.15/16 5.3/8 010527
7/16 0.4375 4.1/16 5.1/2 010528
29/64 0.4531 4.3/16 5.5/8 010529
15/32 0.4688 4.5/16 5.3/4 010530
31/64 0.4844 4.3/8 5.7/8 010531
1/2 0.5000 4.1/2 6“ 010532
R10H
Ŷ
Ɣ
d1
Ø
Inch d1dec.
Inch l2
Inch l1
Inch EDP #
or e-Code
1/32 0.0312 1/2 1.3/8 010502
3/64 0.0469 3/4 1.3/4 010503
1/16 0.0625 7/8 1.7/8 010504
5/64 0.0781 1“ 2“ 010505
3/32 0.0938 1.1/4 2.1/4 010506
7/64 0.1094 1.1/2 2.5/8 010507
1/8 0.1250 1.5/8 2.3/4 010508
9/64 0.1406 1.3/4 2.7/8 010509
5/32 0.1562 2“ 3.1/8 010510
11/64 0.1719 2.1/8 3.1/4 010511
3/16 0.1875 2.5/16 3.1/2 010512
13/64 0.2031 2.7/16 3.5/8 010513
7/32 0.2188 2.1/2 3.3/4 010514
15/64 0.2344 2.5/8 3.7/8 010515
1/4 0.2500 2.3/4 4“ 010516
17/64 0.2656 2.7/8 4.1/8 010517
ƔJobber Drill ƔBroca, serie corta
ƔHigh Helix
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
104 www.precisiondormer.com
R18H
12 0.1890 2.5/16 3.1/2 018512
11 0.1910 2.5/16 3.1/2 018511
10 0.1935 2.7/16 3.5/8 018510
90.1960 2.7/16 3.5/8 018509
80.1990 2.7/16 3.5/8 018508
70.2010 2.7/16 3.5/8 018507
60.2040 2.1/2 3.3/4 018506
50.2055 2.1/2 3.3/4 018505
40.2090 2.1/2 3.3/4 018504
30.2130 2.1/2 3.3/4 018503
20.2210 2.5/8 3.7/8 018502
10.2280 2.5/8 3.7/8 018501
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
80 0.0135 1/8 3/4 018580
79 0.0145 1/8 3/4 018579
78 0.0160 3/16 7/8 018578
77 0.0180 3/16 7/8 018577
76 0.0200 3/16 7/8 018576
75 0.0210 1/4 1“ 018575
74 0.0225 1/4 1“ 018574
73 0.0240 5/16 1.1/8 018573
72 0.0250 5/16 1.1/8 018572
71 0.0260 3/8 1.1/4 018571
70 0.0280 3/8 1.1/4 018570
69 0.0292 1/2 1.3/8 018569
68 0.0310 1/2 1.3/8 018568
67 0.0320 1/2 1.3/8 018567
66 0.0330 1/2 1.3/8 018566
65 0.0350 5/8 1.1/2 018565
64 0.0360 5/8 1.1/2 018564
63 0.0370 5/8 1.1/2 018563
62 0.0380 5/8 1.1/2 018562
61 0.0390 11/16 1.5/8 018561
60 0.0400 11/16 1.5/8 018560
59 0.0410 11/16 1.5/8 018559
58 0.0420 11/16 1.5/8 018558
57 0.0430 3/4 1.3/4 018557
56 0.0465 3/4 1.3/4 018556
55 0.0520 7/8 1.7/8 018555
54 0.0550 7/8 1.7/8 018554
53 0.0595 7/8 1.7/8 018553
52 0.0635 7/8 1.7/8 018552
51 0.0670 1“ 2“ 018551
50 0.0700 1“ 2“ 018550
49 0.0730 1“ 2“ 018549
48 0.0760 1“ 2“ 018548
47 0.0785 1“ 2“ 018547
46 0.0810 1.1/8 2.1/8 018546
45 0.0820 1.1/8 2.1/8 018545
44 0.0860 1.1/8 2.1/8 018544
43 0.0890 1.1/4 2.1/4 018543
42 0.0935 1.1/4 2.1/4 018542
41 0.0960 1.3/8 2.3/8 018541
40 0.0980 1.3/8 2.3/8 018540
39 0.0995 1.3/8 2.3/8 018539
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
38 0.1015 1.7/16 2.1/2 018538
37 0.1040 1.7/16 2.1/2 018537
36 0.1065 1.7/16 2.1/2 018536
35 0.1100 1.1/2 2.5/8 018535
34 0.1110 1.1/2 2.5/8 018534
33 0.1130 1.1/2 2.5/8 018533
32 0.1160 1.5/8 2.3/4 018532
31 0.1200 1.5/8 2.3/4 018531
30 0.1285 1.5/8 2.3/4 018530
29 0.1360 1.3/4 2.7/8 018529
28 0.1405 1.3/4 2.7/8 018528
27 0.1440 1.7/8 3“ 018527
26 0.1470 1.7/8 3“ 018526
25 0.1495 1.7/8 3“ 018525
24 0.1520 2“ 3.1/8 018524
23 0.1540 2“ 3.1/8 018523
22 0.1570 2“ 3.1/8 018522
21 0.1590 2.1/8 3.1/4 018521
20 0.1610 2.1/8 3.1/4 018520
19 0.1660 2.1/8 3.1/4 018519
18 0.1695 2.1/8 3.1/4 018518
17 0.1730 2.3/16 3.3/8 018517
16 0.1770 2.3/16 3.3/8 018516
15 0.1800 2.3/16 3.3/8 018515
14 0.1820 2.3/16 3.3/8 018514
13 0.1850 2.5/16 3.1/2 018513
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
Ɣ High Helix
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 105
www.precisiondormer.com
Ɣ Foret court
12 0.1890 2.5/16 3.1/2 018712
11 0.1910 2.5/16 3.1/2 018711
10 0.1935 2.7/16 3.5/8 018710
90.1960 2.7/16 3.5/8 018709
80.1990 2.7/16 3.5/8 018708
70.2010 2.7/16 3.5/8 018707
60.2040 2.1/2 3.3/4 018706
50.2055 2.1/2 3.3/4 018705
40.2090 2.1/2 3.3/4 018704
30.2130 2.1/2 3.3/4 018703
20.2210 2.5/8 3.7/8 018702
10.2280 2.5/8 3.7/8 018701
R18S
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
80 0.0135 1/8 3/4 018780
79 0.0145 1/8 3/4 018779
78 0.0160 3/16 7/8 018778
77 0.0180 3/16 7/8 018777
76 0.0200 3/16 7/8 018776
75 0.0210 1/4 1“ 018775
74 0.0225 1/4 1“ 018774
73 0.0240 5/16 1.1/8 018773
72 0.0250 5/16 1.1/8 018772
71 0.0260 3/8 1.1/4 018771
70 0.0280 3/8 1.1/4 018770
69 0.0292 1/2 1.3/8 018769
68 0.0310 1/2 1.3/8 018768
67 0.0320 1/2 1.3/8 018767
66 0.0330 1/2 1.3/8 018766
65 0.0350 5/8 1.1/2 018765
64 0.0360 5/8 1.1/2 018764
63 0.0370 5/8 1.1/2 018763
62 0.0380 5/8 1.1/2 018762
61 0.0390 11/16 1.5/8 018761
60 0.0400 11/16 1.5/8 018760
59 0.0410 11/16 1.5/8 018759
58 0.0420 11/16 1.5/8 018758
57 0.0430 3/4 1.3/4 018757
56 0.0465 3/4 1.3/4 018756
55 0.0520 7/8 1.7/8 018755
54 0.0550 7/8 1.7/8 018754
53 0.0595 7/8 1.7/8 018753
52 0.0635 7/8 1.7/8 018752
51 0.0670 1“ 2“ 018751
50 0.0700 1“ 2“ 018750
49 0.0730 1“ 2“ 018749
48 0.0760 1“ 2“ 018748
47 0.0785 1“ 2“ 018747
46 0.0810 1.1/8 2.1/8 018746
45 0.0820 1.1/8 2.1/8 018745
44 0.0860 1.1/8 2.1/8 018744
43 0.0890 1.1/4 2.1/4 018743
42 0.0935 1.1/4 2.1/4 018742
41 0.0960 1.3/8 2.3/8 018741
40 0.0980 1.3/8 2.3/8 018740
39 0.0995 1.3/8 2.3/8 018739
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
38 0.1015 1.7/16 2.1/2 018738
37 0.1040 1.7/16 2.1/2 018737
36 0.1065 1.7/16 2.1/2 018736
35 0.1100 1.1/2 2.5/8 018735
34 0.1110 1.1/2 2.5/8 018734
33 0.1130 1.1/2 2.5/8 018733
32 0.1160 1.5/8 2.3/4 018732
31 0.1200 1.5/8 2.3/4 018731
30 0.1285 1.5/8 2.3/4 018730
29 0.1360 1.3/4 2.7/8 018729
28 0.1405 1.3/4 2.7/8 018728
27 0.1440 1.7/8 3“ 018727
26 0.1470 1.7/8 3“ 018726
25 0.1495 1.7/8 3“ 018725
24 0.1520 2“ 3.1/8 018724
23 0.1540 2“ 3.1/8 018723
22 0.1570 2“ 3.1/8 018722
21 0.1590 2.1/8 3.1/4 018721
20 0.1610 2.1/8 3.1/4 018720
19 0.1660 2.1/8 3.1/4 018719
18 0.1695 2.1/8 3.1/4 018718
17 0.1730 2.3/16 3.3/8 018717
16 0.1770 2.3/16 3.3/8 018716
15 0.1800 2.3/16 3.3/8 018715
14 0.1820 2.3/16 3.3/8 018714
13 0.1850 2.5/16 3.1/2 018713
ƔJobber Drill ƔBroca, serie corta
ƔSlow Helix
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
106 www.precisiondormer.com
L10
ŶƔ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/32 0.0312 1/2 1.3/8 010902
3/64 0.0469 3/4 1.3/4 010903
1/16 0.0625 7/8 1.7/8 010904
5/64 0.0781 1“ 2“ 010905
3/32 0.0938 1.1/4 2.1/4 010906
7/64 0.1094 1.1/2 2.5/8 010907
1/8 0.1250 1.5/8 2.3/4 010908
9/64 0.1406 1.3/4 2.7/8 010909
5/32 0.1562 2“ 3.1/8 010910
11/64 0.1719 2.1/8 3.1/4 010911
3/16 0.1875 2.5/16 3.1/2 010912
13/64 0.2031 2.7/16 3.5/8 010913
7/32 0.2188 2.1/2 3.3/4 010914
15/64 0.2344 2.5/8 3.7/8 010915
1/4 0.2500 2.3/4 4“ 010916
17/64 0.2656 2.7/8 4.1/8 010917
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
9/32 0.2812 2.15/16 4.1/4 010918
19/64 0.2969 3.1/16 4.3/8 010919
5/16 0.3125 3.3/16 4.1/2 010920
21/64 0.3281 3.5/16 4.5/8 010921
11/32 0.3438 3.7/16 4.3/4 010922
23/64 0.3594 3.1/2 4.7/8 010923
3/8 0.3750 3.5/8 5“ 010924
25/64 0.3906 3.3/4 5.1/8 010925
13/32 0.4062 3.7/8 5.1/4 010926
27/64 0.4219 3.15/16 5.3/8 010927
7/16 0.4375 4.1/16 5.1/2 010928
29/64 0.4531 4.3/16 5.5/8 010929
15/32 0.4688 4.5/16 5.3/4 010930
31/64 0.4844 4.3/8 5.7/8 010931
1/2 0.5000 4.1/2 6“ 010932
Ɣ Foret court
ƔJobber Drill ƔBroca , serie corta
R10S - L10
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/8 1.7/8 010704
5/64 0.0781 1“ 2“ 010705
3/32 0.0938 1.1/4 2.1/4 010706
7/64 0.1094 1.1/2 2.5/8 010707
1/8 0.1250 1.5/8 2.3/4 010708
9/64 0.1406 1.3/4 2.7/8 010709
5/32 0.1562 2“ 3.1/8 010710
11/64 0.1719 2.1/8 3.1/4 010711
3/16 0.1875 2.5/16 3.1/2 010712
13/64 0.2031 2.7/16 3.5/8 010713
7/32 0.2188 2.1/2 3.3/4 010714
15/64 0.2344 2.5/8 3.7/8 010715
1/4 0.2500 2.3/4 4“ 010716
17/64 0.2656 2.7/8 4.1/8 010717
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
9/32 0.2812 2.15/16 4.1/4 010718
19/64 0.2969 3.1/16 4.3/8 010719
5/16 0.3125 3.3/16 4.1/2 010720
21/64 0.3281 3.5/16 4.5/8 010721
11/32 0.3438 3.7/16 4.3/4 010722
23/64 0.3594 3.1/2 4.7/8 010723
3/8 0.3750 3.5/8 5“ 010724
25/64 0.3906 3.3/4 5.1/8 010725
13/32 0.4062 3.7/8 5.1/4 010726
27/64 0.4219 3.15/16 5.3/8 010727
7/16 0.4375 4.1/16 5.1/2 010728
29/64 0.4531 4.3/16 5.5/8 010729
15/32 0.4688 4.5/16 5.3/4 010730
31/64 0.4844 4.3/8 5.7/8 010731
1/2 0.5000 4.1/2 6“ 010732
ƔJobber Drill Ɣ Foret court ƔBroca, serie corta
ƔLeft Hand
ƔSlow Helix
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 107
www.precisiondormer.com
L18
Ŷ
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
60 0.0400 11/16 1.5/8 018960
59 0.0410 11/16 1.5/8 018959
58 0.0420 11/16 1.5/8 018958
57 0.0430 3/4 1.3/4 018957
56 0.0465 3/4 1.3/4 018956
55 0.0520 7/8 1.7/8 018955
54 0.0550 7/8 1.7/8 018954
53 0.0595 7/8 1.7/8 018953
52 0.0635 7/8 1.7/8 018952
51 0.0670 1“ 2“ 018951
50 0.0700 1“ 2“ 018950
49 0.0730 1“ 2“ 018949
48 0.0760 1“ 2“ 018948
47 0.0785 1“ 2“ 018947
46 0.0810 1.1/8 2.1/8 018946
48 0.0820 1.1/8 2.1/8 018945
44 0.0860 1.1/8 2.1/8 018944
43 0.0890 1.1/4 2.1/4 018943
42 0.0935 1.1/4 2.1/4 018942
41 0.0960 1.3/8 2.3/8 018941
40 0.0980 1.3/8 2.3/8 018940
39 0.0995 1.3/8 2.3/8 018939
38 0.1015 1.7/16 2.1/2 018938
37 0.1040 1.7/16 2.1/2 018937
36 0.1065 1.7/16 2.1/2 018936
35 0.1100 1.1/2 2.5/8 018935
34 0.1110 1.1/2 2.5/8 018934
33 0.1130 1.1/2 2.5/8 018933
32 0.1160 1.5/8 2.3/4 018932
31 0.1200 1.5/8 2.3/4 018931
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
30 0.1285 1.5/8 2.3/4 018930
29 0.1360 1.3/4 2.7/8 018929
28 0.1405 1.3/4 2.7/8 018928
27 0.1440 1.7/8 3“ 018927
26 0.1470 1.7/8 3“ 018926
25 0.1495 1.7/8 3“ 018925
24 0.1520 2“ 3.1/8 018924
23 0.1540 2“ 3.1/8 018923
22 0.1570 2“ 3.1/8 018922
21 0.1590 2.1/8 3.1/4 018921
20 0.1610 2.1/8 3.1/4 018920
19 0.1660 2.1/8 3.1/4 018919
18 0.1695 2.1/8 3.1/4 018918
17 0.1730 2.3/16 3.3/8 018917
16 0.1770 2.3/16 3.3/8 018916
15 0.1800 2.3/16 3.3/8 018915
14 0.1820 2.3/16 3.3/8 018914
13 0.1850 2.5/16 3.1/2 018913
12 0.1890 2.5/16 3.1/2 018912
11 0.1910 2.5/16 3.1/2 018911
10 0.1935 2.7/16 3.5/8 018910
90.1960 2.7/16 3.5/8 018909
80.1990 2.7/16 3.5/8 018908
70.2010 2.7/16 3.5/8 018907
60.2040 2.1/2 3.3/4 018906
50.2055 2.1/2 3.3/4 018905
40.2090 2.1/2 3.3/4 018904
30.2130 2.1/2 3.3/4 018903
20.2210 2.5/8 3.7/8 018902
10.2280 2.5/8 3.7/8 018901
Ɣ Foret courtƔJobber Drill ƔBroca , serie corta
ƔLeft Hand
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Prod-
Icon1
Photo
Icon2
Icon3
Icon4
Icon5
Icon6
Icon7
Icon8
Icon9
Icon10
Icon11
Range-
Dim
Cata-
1.1 M11
1.2 M12
1.3 M13
1.4 M14
1.5 M15
1.6 M16
1.7 M17
1.8 M18
2.1 M21
2.2 M22
2.3 M23
2.4 M24
3.1 M31
3.2 M32
3.3 M33
3.4 M34
4.1 M41
4.2 M42
4.3 M43
5.1 M51
5.2 M52
5.3 M53
6.1 M61
6.2 M62
6.3 M63
6.4 M64
7.1 M71
7.2 M72
7.3 M73
7.4 M74
8.1 M81
8.2 M82
8.3 M83
9.1 M91
10.1 M101
www.precisiondormer.com
HSS Taper Length Drills
HSS Taper Length Drills
108
1
1
2
2
3
3
4
4
1
1
2
2
3
3
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Depth of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 125 F
125 = SFM
F = Alpha Code to find your Feed Rate
To calculate Cutting Feed Rate, refer to chart on pages 9-10.
Style:
Tool Material:
Finish/Coating:
Standard:
Direction of Cut:
Depth of Cut:
Tool Length:
Helix:
Shank:
Point Angle:
Point Style:
Ɣ = Good for Application
Ŷ = Excellent for Application
Page # for easy reference
A578 A916 QC91CO
QC91-
COM QC91V
110-111 112-113 114-115 116
Ɣ161G Ɣ115F Ɣ115J Ŷ125F
Ɣ138G Ɣ98F Ɣ98H Ŷ75F
Ŷ115F Ŷ82E Ɣ89G Ŷ79H
Ŷ115F Ŷ82E Ɣ79F Ŷ75F
Ŷ69D Ŷ49C Ŷ56E Ɣ59D
Ŷ56D Ŷ39C Ŷ33D
Ɣ56C Ɣ49C Ɣ72E Ɣ115H
Ŷ30E Ŷ23E Ɣ36G Ɣ66F
Ɣ36B Ɣ30B Ɣ49C Ɣ66D
Ŷ131G Ɣ115H Ŷ184H
Ŷ118F Ɣ85E Ɣ92D Ŷ98H
Ŷ82F Ɣ59E Ɣ72E Ɣ105F
Ŷ59D Ɣ43C Ŷ56E Ɣ66D
Ɣ82F Ŷ59E Ŷ92F
Ɣ59D Ŷ43C Ŷ66D
Ɣ26D Ŷ20C Ŷ36C
Ɣ49G Ɣ66H
Ŷ23E
Ɣ20B
Ɣ213F Ɣ125H Ŷ112I
Ɣ230F Ɣ131F Ŷ98H
Ɣ157H Ɣ112G Ɣ84H Ŷ98H
Ɣ138H Ɣ98G Ɣ69F
Ɣ230E Ɣ108J Ŷ440H
Ŷ148N Ɣ98I Ŷ384H
Ɣ131N Ɣ98H
Ŷ138H Ɣ98G Ɣ89F Ŷ344H
Ɣ180H
Ɣ131F
Ɣ20C
Page # for easy reference Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
www.precisiondormer.com
HSS Taper Length Drills
109
HSS Taper Length Drills (con‘t)
QC91G
QC21GM QC91
QC91M QC91P
QC91PM M51CO
M52CO R53OH R51OH EZ51P R51K R51
R52
R55 5ATL R09 R51FS
R52FS
R55FS
117, 120 118, 121 119, 122 123-124 125 125 126 127 128-130 131-132 133 134-135
Ŷ115F Ŷ98F Ŷ98F Ɣ89G Ŷ154F Ŷ154F Ŷ98F Ŷ98F Ɣ89G Ɣ89G Ŷ98F
Ŷ69F Ŷ59F Ŷ59F Ɣ82G Ŷ75F Ŷ75F Ŷ59F Ŷ59F Ɣ82G Ɣ82G Ŷ59F
Ŷ75H Ŷ69H Ŷ66H Ɣ66E Ŷ98H Ŷ98H Ŷ66H Ŷ66H Ɣ66E Ɣ66E Ŷ66H
Ŷ69F Ŷ59F Ŷ59F Ɣ52E Ŷ85F Ŷ85F Ŷ59F Ŷ59F Ɣ52E Ɣ52E Ŷ59F
Ɣ56D Ɣ46D Ɣ46D Ɣ30D Ɣ59D Ɣ59D Ɣ46D Ɣ46D Ɣ30D Ɣ30D Ɣ46D
Ɣ20B Ɣ30B Ɣ30B Ɣ20B Ɣ20B
Ɣ105H Ɣ89H Ɣ89H Ɣ33D Ɣ121H Ɣ121H Ɣ89H Ɣ89H Ɣ33D Ɣ33D Ɣ89H
Ɣ59F Ɣ49F Ɣ49F Ɣ20F Ɣ66F Ɣ66F Ɣ46F Ɣ49F Ɣ20F Ɣ20F Ɣ49F
Ɣ59D Ɣ49D Ɣ49D Ɣ13B Ɣ66D Ɣ66D Ɣ49D Ɣ49D Ɣ13B Ɣ13B Ɣ49D
Ɣ49D Ɣ49D
Ŷ171H Ŷ151H Ŷ151H Ɣ92H Ŷ180H Ŷ180H Ŷ151H Ŷ151H Ɣ92H Ɣ92H Ŷ151H
Ŷ89H Ŷ79H Ŷ79H Ɣ69E Ŷ112H Ŷ112H Ŷ79H Ŷ79H Ɣ69E Ɣ69E Ŷ79H
Ɣ95F Ɣ85F Ɣ79F Ɣ49D Ɣ134F Ɣ134F Ɣ79F Ɣ79F Ɣ49D Ɣ49D Ɣ79F
Ɣ59D Ɣ43D Ɣ75D Ɣ75D Ɣ43D Ɣ43D
Ɣ95H Ɣ89H Ɣ56E Ɣ112H Ɣ112H Ɣ89H Ɣ89H Ɣ56E Ɣ56E Ɣ89H
Ɣ49F Ɣ49F Ɣ30C Ɣ98F Ɣ98F Ɣ49F Ɣ49F Ɣ30C Ɣ30C Ɣ49F
Ɣ13A Ɣ26D Ɣ26D Ɣ13A Ɣ13A
Ɣ59H Ɣ49F Ɣ49F Ɣ26F Ɣ75F Ɣ75F Ɣ49F Ɣ49F Ɣ26F Ɣ26F Ɣ49F
Ɣ13D Ɣ30B Ɣ30B Ɣ13D Ɣ13D
Ɣ10A Ɣ10A Ɣ10A
Ŷ98I Ɣ89I Ɣ98E Ŷ125I Ŷ89I Ɣ89I Ɣ98E Ɣ98E Ɣ89I Ŷ89I
Ŷ89H Ɣ79H Ɣ105H Ŷ184H Ŷ85H Ɣ79H Ɣ105H Ɣ105H Ɣ79H
Ŷ89H Ɣ79H Ɣ89G Ŷ180H Ŷ79H Ɣ75H Ɣ89G Ɣ89G Ɣ75H
Ɣ52E Ŷ184H Ɣ52E Ɣ52E
Ŷ400H Ɣ351H Ɣ105I Ŷ420H Ŷ351H Ɣ105I Ɣ105I Ŷ348H
Ŷ351H Ɣ325H Ɣ89H Ŷ374H Ŷ325H Ɣ89H Ɣ89H Ŷ325H
Ɣ89G Ŷ298H Ɣ89G Ɣ89G
Ŷ315H Ɣ276H Ɣ82E Ŷ364H Ŷ276H Ɣ82E Ɣ82E Ŷ276H
Ɣ115I Ɣ115I Ɣ115I
Ɣ85G Ɣ85G Ɣ85G
Ɣ39E Ɣ39E Ɣ39E
Ɣ10A Ɣ10A Ɣ10A
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Surface Feet per Minute (SFM)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
110 www.precisiondormer.com
A578
Ŷ
Ɣ
d1Øh8
mm d1dec.
Inch l2
mm l1
mm Stock # EDP #
or e-Code
1.00 0.0393 33 56 0613832 A5781.0
1.50 0.0590 45 70 0613849 A5781.5
2.00 0.0787 56 85 0613856 A5782.0
2.50 0.0984 62 95 0613863 A5782.5
3.00 0.1181 66 100 0279229 A5783.0
3.10 0.1220 69 106 0587027 A5783.1
3.20 0.1259 69 106 0587034 A5783.2
3.30 0.1299 69 106 0279236 A5783.3
3.40 0.1338 73 112 0279243 A5783.4
3.50 0.1377 73 112 0279250 A5783.5
3.60 0.1417 73 112 0587041 A5783.6
3.70 0.1456 73 112 0587058 A5783.7
3.80 0.1496 78 119 0587065 A5783.8
3.90 0.1535 78 119 0587072 A5783.9
4.00 0.1574 78 119 0279267 A5784.0
4.10 0.1614 78 119 0587089 A5784.1
4.20 0.1653 78 119 0279274 A5784.2
4.30 0.1692 82 126 0587096 A5784.3
4.40 0.1732 82 126 0587102 A5784.4
4.50 0.1771 82 126 0279281 A5784.5
4.60 0.1811 82 126 0587119 A5784.6
4.70 0.1850 82 126 0587126 A5784.7
4.80 0.1889 87 132 0587133 A5784.8
4.90 0.1929 87 132 0587140 A5784.9
5.00 0.1968 87 132 0279298 A5785.0
5.10 0.2007 87 132 0587157 A5785.1
5.20 0.2047 87 132 0587164 A5785.2
5.30 0.2086 87 132 0587171 A5785.3
5.40 0.2125 91 139 0587188 A5785.4
5.50 0.2165 91 139 0279304 A5785.5
5.60 0.2204 91 139 0587195 A5785.6
5.70 0.2244 91 139 0587201 A5785.7
Ɣ Foret PFXsérie longue
ƔPFX long series drill ƔBroca PFX - serie larga
d1Øh8
mm d1dec.
Inch l2
mm l1
mm Stock # EDP #
or e-Code
5.80 0.2283 91 139 0587218 A5785.8
5.90 0.2322 91 139 0587225 A5785.9
6.00 0.2362 91 139 0279311 A5786.0
6.10 0.2401 97 148 0587232 A5786.1
6.20 0.2440 97 148 0587249 A5786.2
6.30 0.2480 97 148 0587256 A5786.3
6.40 0.2519 97 148 0587263 A5786.4
6.50 0.2559 97 148 0279328 A5786.5
6.60 0.2598 97 148 0279335 A5786.6
6.70 0.2637 97 148 0587270 A5786.7
6.80 0.2677 102 156 0279342 A5786.8
6.90 0.2716 102 156 0587287 A5786.9
7.00 0.2755 102 156 0279359 A5787.0
7.10 0.2795 102 156 0587294 A5787.1
7.20 0.2834 102 156 0587300 A5787.2
7.30 0.2874 102 156 0587317 A5787.3
7.40 0.2913 102 156 0587324 A5787.4
7.50 0.2952 102 156 0279366 A5787.5
7.60 0.2992 109 165 0279373 A5787.6
7.70 0.3031 109 165 0587331 A5787.7
7.80 0.3070 109 165 0587348 A5787.8
7.90 0.3110 109 165 0587355 A5787.9
8.00 0.3149 109 165 0279380 A5788.0
8.10 0.3188 109 165 0587362 A5788.1
8.20 0.3228 109 165 0587379 A5788.2
8.30 0.3267 109 165 0587386 A5788.3
8.40 0.3307 109 165 0587393 A5788.4
8.50 0.3346 109 165 0279397 A5788.5
8.60 0.3385 115 175 0587409 A5788.6
8.70 0.3425 115 175 0587416 A5788.7
8.80 0.3464 115 175 0587423 A5788.8
8.90 0.3503 115 175 0587430 A5788.9
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 111
www.precisiondormer.com
11.50 0.4527 150 195 0279465 A57811.5 1)
11.80 0.4646 150 195 0586914 A57811.8 1)
12.00 0.4724 160 205 0279472 A57812.0 1)
12.20 0.4803 160 205 0586921 A57812.2 1)
12.50 0.4921 160 205 0586938 A57812.5 1)
12.80 0.5039 160 205 0586945 A57812.8 1)
13.00 0.5118 160 205 0586952 A57813.0 1)
13.50 0.5314 169 214 0586969 A57813.5 1)
14.00 0.5511 169 214 0586976 A57814.0 1)
14.50 0.5708 172 220 0586983 A57814.5 1)
15.00 0.5905 172 220 0586990 A57815.0 1)
15.50 0.6102 179 227 0587003 A57815.5 1)
16.00 0.6299 179 227 0587010 A57816.0 1)
d1Øh8
mm d1dec.
Inch l2
mm l1
mm Stock # EDP #
or e-Code
9.00 0.3543 115 175 0279403 A5789.0
9.10 0.3582 115 175 0587447 A5789.1
9.20 0.3622 115 175 0587454 A5789.2
9.30 0.3661 115 175 0587461 A5789.3
9.40 0.3700 115 175 0587478 A5789.4
9.50 0.3740 115 175 0279410 A5789.5
9.60 0.3779 121 184 0587485 A5789.6
9.70 0.3818 121 184 0587492 A5789.7
9.80 0.3858 121 184 0587508 A5789.8
9.90 0.3897 121 184 0587515 A5789.9
10.00 0.3937 139 184 0279427 A57810.0 1)
10.20 0.4015 139 184 0279434 A57810.2 1)
10.30 0.4055 139 184 0586877 A57810.3 1)
10.40 0.4094 139 184 0586884 A57810.4 1)
10.50 0.4133 139 184 0279441 A57810.5 1)
10.80 0.4251 150 195 0586891 A57810.8 1)
11.00 0.4330 150 195 0279458 A57811.0 1)
11.20 0.4409 150 195 0586907 A57811.2 1)
A578
d1Øh8
mm d1decimal
Inch l2
mm l1
mm Stock # EDP #
or e-Code
1) Flute Lengths Longer than Standard
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
112 www.precisiondormer.com
A916
Ŷ
Ɣ
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
1.00 0.0393 33 56 0146330 A9161.0
1.10 0.0433 37 60 0146347 A9161.1
1.20 0.0472 41 65 0146354 A9161.2
1.30 0.0511 41 65 0146361 A9161.3
1.40 0.0551 45 70 0146378 A9161.4
1.50 0.0590 45 70 0146385 A9161.5
1/16 1.59 0.0625 50 76 0171752 A9161/16
1.60 0.0629 50 76 0146392 A9161.6
1.70 0.0669 50 76 0146408 A9161.7
1.80 0.0708 53 80 0146415 A9161.8
1.90 0.0748 53 80 0146422 A9161.9
5/64 1.98 0.0779 56 85 0171769 A9165/64
2.00 0.0787 56 85 0146439 A9162.0
2.10 0.0826 56 85 0146446 A9162.1
2.20 0.0866 59 90 0146453 A9162.2
2.30 0.0905 59 90 0146460 A9162.3
3/32 2.38 0.0937 62 95 0171776 A9163/32
2.40 0.0944 62 95 0146477 A9162.4
2.50 0.0984 62 95 0146484 A9162.5
2.60 0.1023 62 95 0146491 A9162.6
2.70 0.1062 66 100 0146507 A9162.7
7/64 2.78 0.1094 66 100 0171783 A9167/64
2.80 0.1102 66 100 0146514 A9162.8
2.90 0.1141 66 100 0146521 A9162.9
3.00 0.1181 66 100 0146538 A9163.0
3.10 0.1220 69 106 0146545 A9163.1
1/8 3.18 0.1251 69 106 0171790 A9161/8
3.20 0.1259 69 106 0146552 A9163.2
3.30 0.1299 69 106 0146569 A9163.3
3.40 0.1338 73 112 0146576 A9163.4
3.50 0.1377 73 112 0146583 A9163.5
9/64 3.57 0.1405 73 112 0171806 A9169/64
3.60 0.1417 73 112 0146590 A9163.6
3.70 0.1456 73 112 0146606 A9163.7
3.80 0.1496 78 119 0146613 A9163.8
3.90 0.1535 78 119 0146620 A9163.9
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
5/32 3.97 0.1562 78 119 0171813 A9165/32
4.00 0.1574 78 119 0146637 A9164.0
4.10 0.1614 78 119 0146644 A9164.1
4.20 0.1653 78 119 0146651 A9164.2
4.30 0.1692 82 126 0146668 A9164.3
11/64 4.37 0.1720 82 126 0171820 A91611/64
4.40 0.1732 82 126 0146675 A9164.4
4.50 0.1771 82 126 0146682 A9164.5
4.60 0.1811 82 126 0146699 A9164.6
4.70 0.1850 82 126 0146705 A9164.7
3/16 4.76 0.1874 87 132 0171837 A9163/16
4.80 0.1889 87 132 0146712 A9164.8
4.90 0.1929 87 132 0146729 A9164.9
5.00 0.1968 87 132 0146736 A9165.0
5.10 0.2007 87 132 0146743 A9165.1
13/64 5.16 0.2031 87 132 0171844 A91613/64
5.20 0.2047 87 132 0146750 A9165.2
5.30 0.2086 87 132 0146767 A9165.3
5.40 0.2125 91 139 0146774 A9165.4
5.50 0.2165 91 139 0146781 A9165.5
7/32 5.56 0.2188 91 139 0171851 A9167/32
5.60 0.2204 91 139 0146798 A9165.6
5.70 0.2244 91 139 0146804 A9165.7
5.80 0.2283 91 139 0146811 A9165.8
5.90 0.2322 91 139 0146828 A9165.9
15/64 5.95 0.2342 91 139 0171868 A91615/64
6.00 0.2362 91 139 0146835 A9166.0
6.10 0.2401 97 148 0146842 A9166.1
6.20 0.2440 97 148 0146859 A9166.2
6.30 0.2480 97 148 0146866 A9166.3
1/4 6.35 0.2500 97 148 0171875 A9161/4
6.40 0.2519 97 148 0146873 A9166.4
6.50 0.2559 97 148 0146880 A9166.5
6.60 0.2598 97 148 0146897 A9166.6
6.70 0.2637 97 148 0146903 A9166.7
17/64 6.75 0.2657 102 156 0171882 A91617/64
Ɣ Foret PFXsérie longueƔPFX long series drill ƔBroca PFX - serie larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 113
www.precisiondormer.com
A916
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
6.80 0.2677 102 156 0146910 A9166.8
6.90 0.2716 102 156 0146927 A9166.9
7.00 0.2755 102 156 0146934 A9167.0
7.10 0.2795 102 156 0146941 A9167.1
9/32 7.14 0.2811 102 156 0171899 A9169/32
7.20 0.2834 102 156 0146958 A9167.2
7.30 0.2874 102 156 0146965 A9167.3
7.40 0.2913 102 156 0146972 A9167.4
7.50 0.2952 102 156 0146989 A9167.5
19/64 7.54 0.2968 109 165 0171905 A91619/64
7.60 0.2992 109 165 0146996 A9167.6
7.70 0.3031 109 165 0147009 A9167.7
7.80 0.3070 109 165 0147016 A9167.8
7.90 0.3110 109 165 0147023 A9167.9
5/16 7.94 0.3125 109 165 0171912 A9165/16
8.00 0.3149 109 165 0147030 A9168.0
8.10 0.3188 109 165 0147047 A9168.1
8.20 0.3228 109 165 0147061 A9168.2
8.30 0.3267 109 165 0147078 A9168.3
21/64 8.33 0.3279 109 165 0171929 A91621/64
8.40 0.3307 109 165 0147085 A9168.4
8.50 0.3346 109 165 0147092 A9168.5
8.60 0.3385 115 175 0147108 A9168.6
8.70 0.3425 115 175 0147115 A9168.7
11/32 8.73 0.3437 115 175 0171936 A91611/32
8.80 0.3464 115 175 0147122 A9168.8
8.90 0.3503 115 175 0147139 A9168.9
9.00 0.3543 115 175 0147146 A9169.0
9.10 0.3582 115 175 0147153 A9169.1
23/64 9.13 0.3594 115 175 0171943 A91623/64
9.20 0.3622 115 175 0147160 A9169.2
9.30 0.3661 115 175 0147177 A9169.3
9.40 0.3700 115 175 0147184 A9169.4
9.50 0.3740 115 175 0147191 A9169.5
3/8 9.53 0.3751 139 184 0171950 A9163/8 1)
9.60 0.3779 139 184 0147207 A9169.6 1)
9.70 0.3818 139 184 0147214 A9169.7 1)
9.80 0.3858 139 184 0147221 A9169.8 1)
9.90 0.3897 139 184 0147238 A9169.9 1)
25/64 9.92 0.3905 139 184 0171967 A91625/64 1)
10.00 0.3937 139 184 0147245 A91610.0 1)
10.20 0.4015 139 184 0147252 A91610.2 1)
10.30 0.4055 139 184 0171974 A91610.3 1)
13/32 10.32 0.4062 139 184 0171981 A91613/32 1)
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch l2
mm l1
mm Stock #
EDP #
or
e-Code
10.40 0.4094 139 184 0171998 A91610.4 1)
10.50 0.4133 139 184 0147269 A91610.5 1)
27/64 10.72 0.4220 150 195 0172001 A91627/64 1)
10.80 0.4251 150 195 0147276 A91610.8 1)
11.00 0.4330 150 195 0147283 A91611.0 1)
7/16 11.11 0.4374 150 195 0172018 A9167/16 1)
11.20 0.4409 150 195 0147290 A91611.2 1)
11.50 0.4527 150 195 0147306 A91611.5 1)
29/64 11.51 0.4531 150 195 0172025 A91629/64 1)
11.80 0.4645 150 195 0147313 A91611.8 1)
15/32 11.91 0.4688 160 205 0172032 A91615/32 1)
12.00 0.4724 160 205 0147320 A91612.0 1)
12.20 0.4803 160 205 0147337 A91612.2 1)
31/64 12.30 0.4842 160 205 0172049 A91631/64 1)
12.50 0.4921 160 205 0147344 A91612.5 1)
1/2 12.70 0.5000 160 205 0172056 A9161/2 1)
12.80 0.5039 160 205 0147351 A91612.8 1)
13.00 0.5118 160 205 0147368 A91613.0 1)
33/64 13.10 0.5156 160 205 0588376 A91633/64 1)
17/32 13.49 0.5312 169 214 0588291 A91617/32 1)
13.50 0.5314 169 214 0588208 A91613.5 1)
14.00 0.5511 169 214 0588215 A91614.0 1)
9/16 14.29 0.5625 172 220 0588420 A9169/16 1)
14.50 0.5708 172 220 0588222 A91614.5 1)
37/64 14.68 0.5781 172 220 0588383 A91637/64 1)
15.00 0.5905 172 220 0588239 A91615.0 1)
19/32 15.08 0.5938 179 227 0588321 A91619/32 1)
15.50 0.6102 179 227 0588246 A91615.5 1)
5/8 15.88 0.6250 179 255 0588413 A9165/8 1)
16.00 0.6299 179 227 0588253 A91616.0 1)
16.50 0.6496 188 235 0588260 A91616.5 1)
21/32 16.67 0.6562 188 235 0588345 A91621/32 1)
17.00 0.6693 188 235 0588277 A91617.0 1)
11/16 17.46 0.6875 195 241 0588192 A91611/16 1)
17.50 0.6890 195 241 0588284 A91617.5 1)
45/64 17.86 0.7031 195 241 0588390 A91645/64 1)
18.00 0.7087 195 257 0588307 A91618.0 1)
2)
23/32 18.27 0.7188 210 257 0588352 A91623/32 1)
2)
47/64 18.65 0.7344 210 257 0588406 A91647/64 1)
2)
19.00 0.7480 210 264 0588314 A91619.0 1)
2)
3/4 19.05 0.75 215 264 0588369 A9163/4 1)
2)
20.00 0.7874 220 264 0588338 A91620.0 1)
2)
1) Flute Lengths Longer than Standard
2) Overall Lengths Longer than Standard
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
114 www.precisiondormer.com
5/16 0.3125 4“ 6.3/8 057820
21/64 0.3281 4.1/8 6.1/2 057821
11/32 0.3438 4.1/8 6.1/2 057822
23/64 0.3594 4.1/4 6.3/4 057823
3/8 0.3750 4.1/4 6.3/4 057824
25/64 0.3906 4.3/8 7“ 057825
13/32 0.4062 4.3/8 7“ 057826
27/64 0.4219 4.5/8 7.1/4 057827
7/16 0.4375 4.5/8 7.1/4 057828
29/64 0.4531 4.3/4 7.1/2 057829
15/32 0.4688 4.3/4 7.1/2 057830
31/64 0.4844 4.3/4 7.3/4 057831
1/2 0.5000 4.3/4 7.3/4 057832
QC91CO
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 1.3/4 3“ 057804
52 0.0635 2“ 3.3/4 053952
51 0.0670 2“ 3.3/4 053951
50 0.0700 2“ 3.3/4 053950
49 0.0730 2“ 3.3/4 053949
48 0.0760 2“ 3.3/4 053948
5/64 0.0781 2“ 3.3/4 057805
47 0.0785 2.1/4 4.1/4 053947
46 0.0810 2.1/4 4.1/4 053946
45 0.0820 2.1/4 4.1/4 053945
44 0.0860 2.1/4 4.1/4 053944
43 0.0890 2.1/4 4.1/4 053943
42 0.0935 2.1/4 4.1/4 053942
3/32 0.0938 2.1/4 4.1/4 057806
41 0.0960 2.1/2 4.5/8 053941
40 0.0980 2.1/2 4.5/8 053940
39 0.0995 2.1/2 4.5/8 053939
38 0.1015 2.1/2 4.5/8 053938
37 0.1040 2.1/2 4.5/8 053937
36 0.1065 2.1/2 4.5/8 053936
7/64 0.1094 2.1/2 4.5/8 057807
35 0.1100 2.3/4 5.1/8 053935
34 0.1110 2.3/4 5.1/8 053934
33 0.1130 2.3/4 5.1/8 053933
32 0.1160 2.3/4 5.1/8 053932
31 0.1200 2.3/4 5.1/8 053931
1/8 0.1250 2.3/4 5.1/8 057808
30 0.1285 3“ 5.3/8 053930
29 0.1360 3“ 5.3/8 053929
28 0.1405 3“ 5.3/8 053928
9/64 0.1406 3“ 5.3/8 057809
27 0.1440 3“ 5.3/8 053927
26 0.1470 3“ 5.3/8 053926
25 0.1495 3“ 5.3/8 053925
24 0.1520 3“ 5.3/8 053924
23 0.1540 3“ 5.3/8 053923
5/32 0.1562 3“ 5.3/8 057810
22 0.1570 3.3/8 5.3/4 053922
21 0.1590 3.3/8 5.3/4 053921
20 0.1610 3.3/8 5.3/4 053920
19 0.1660 3.3/8 5.3/4 053919
18 0.1695 3.3/8 5.3/4 053918
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
11/64 0.1719 3.3/8 5.3/4 057811
17 0.1730 3.3/8 5.3/4 053917
16 0.1770 3.3/8 5.3/4 053916
15 0.1800 3.3/8 5.3/4 053915
14 0.1820 3.3/8 5.3/4 053914
13 0.1850 3.3/8 5.3/4 053913
3/16 0.1875 3.3/8 5.3/4 057812
12 0.1890 3.5/8 6“ 053912
11 0.1910 3.5/8 6“ 053911
10 0.1935 3.5/8 6“ 053910
90.1960 3.5/8 6“ 053909
80.1990 3.5/8 6“ 053908
70.2010 3.5/8 6“ 053907
13/64 0.2031 3.5/8 6“ 057813
60.2040 3.5/8 6“ 053906
50.2055 3.5/8 6“ 053905
40.2090 3.5/8 6“ 053904
30.2130 3.5/8 6“ 053903
7/32 0.2188 3.5/8 6“ 057814
20.2210 3.3/4 6.1/8 053902
10.2280 3.3/4 6.1/8 053901
15/64 0.2344 3.3/4 6.1/8 057815
1/4 0.2500 3.3/4 6.1/8 057816
17/64 0.2656 3.7/8 6.1/4 057817
9/32 0.2812 3.7/8 6.1/4 057818
19/64 0.2969 4“ 6.3/8 057819
Ɣ Foret serie longue Ɣ Taper length drill
ƔWide-land parabolic fl ute
ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 115
www.precisiondormer.com
QC91COM
Ŷ
Ɣ
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
1.50 0.0591 45 70 050415
2.00 0.0787 56 85 050420
2.50 0.0984 62 95 050425
3.00 0.1181 66 100 050430
3.50 0.1378 73 112 050435
4.00 0.1575 78 119 050440
4.50 0.1772 82 126 050445
5.00 0.1969 87 132 050450
5.20 0.2047 87 132 050452
5.50 0.2165 91 139 050455
5.60 0.2205 91 139 050456
6.00 0.2362 91 139 050460
6.50 0.2559 97 148 050465
6.80 0.2677 102 156 050468
7.00 0.2756 102 156 050470
7.50 0.2953 102 156 050475
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
8.00 0.3150 109 165 050480
8.20 0.3228 109 165 050482
8.50 0.3346 109 165 050485
8.60 0.3386 115 175 050486
9.00 0.3543 115 175 050490
9.50 0.3740 115 175 050495
10.00 0.3937 121 184 050500
10.50 0.4134 121 184 050505
11.00 0.4331 128 195 050510
11.50 0.4528 128 195 050515
12.00 0.4724 134 205 050520
12.50 0.4921 134 205 050525
13.00 0.5118 134 205 050530
Ɣ Foret serie longue Ɣ Taper length drill
ƔWide-land parabolic fl ute
ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
116 www.precisiondormer.com
5/16 0.3125 4“ 6.3/8 081820
21/64 0.3281 4.1/8 6.1/2 081821
11/32 0.3438 4.1/8 6.1/2 081822
23/64 0.3594 4.1/4 6.3/4 081823
3/8 0.3750 4.1/4 6.3/4 081824
25/64 0.3906 4.3/8 7“ 081825
13/32 0.4062 4.3/8 7“ 081826
27/64 0.4219 4.5/8 7.1/4 081827
7/16 0.4375 4.5/8 7.1/4 081828
29/64 0.4531 4.3/4 7.1/2 081829
15/32 0.4688 4.3/4 7.1/2 081830
31/64 0.4844 4.3/4 7.3/4 081831
1/2 0.5000 4.3/4 7.3/4 081832
QC91V
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 1.3/4 3“ 081804
52 0.0635 2“ 3.3/4 080852
51 0.0670 2“ 3.3/4 080851
50 0.0700 2“ 3.3/4 080850
49 0.0730 2“ 3.3/4 080849
48 0.0760 2“ 3.3/4 080848
5/64 0.0781 2“ 3.3/4 081805
47 0.0785 2.1/4 4.1/4 080847
46 0.0810 2.1/4 4.1/4 080846
45 0.0820 2.1/4 4.1/4 080845
44 0.0860 2.1/4 4.1/4 080844
43 0.0890 2.1/4 4.1/4 080843
42 0.0935 2.1/4 4.1/4 080842
3/32 0.0938 2.1/4 4.1/4 081806
41 0.0960 2.1/2 4.5/8 080841
40 0.0980 2.1/2 4.5/8 080840
39 0.0995 2.1/2 4.5/8 080839
38 0.1015 2.1/2 4.5/8 080838
37 0.1040 2.1/2 4.5/8 080837
36 0.1065 2.1/2 4.5/8 080836
7/64 0.1094 2.1/2 4.5/8 081807
35 0.1100 2.3/4 5.1/8 080835
34 0.1110 2.3/4 5.1/8 080834
33 0.1130 2.3/4 5.1/8 080833
32 0.1160 2.3/4 5.1/8 080832
31 0.1200 2.3/4 5.1/8 080831
1/8 0.1250 2.3/4 5.1/8 081808
30 0.1285 3“ 5.3/8 080830
29 0.1360 3“ 5.3/8 080829
28 0.1405 3“ 5.3/8 080828
9/64 0.1406 3“ 5.3/8 081809
27 0.1440 3“ 5.3/8 080827
26 0.1470 3“ 5.3/8 080826
25 0.1495 3“ 5.3/8 080825
24 0.1520 3“ 5.3/8 080824
23 0.1540 3“ 5.3/8 080823
5/32 0.1562 3“ 5.3/8 081810
22 0.1570 3.3/8 5.3/4 080822
21 0.1590 3.3/8 5.3/4 080821
20 0.1610 3.3/8 5.3/4 080820
19 0.1660 3.3/8 5.3/4 080819
18 0.1695 3.3/8 5.3/4 080818
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
11/64 0.1719 3.3/8 5.3/4 081811
17 0.1730 3.3/8 5.3/4 080817
16 0.1770 3.3/8 5.3/4 080816
15 0.1800 3.3/8 5.3/4 080815
14 0.1820 3.3/8 5.3/4 080814
13 0.1850 3.3/8 5.3/4 080813
3/16 0.1875 3.3/8 5.3/4 081812
12 0.1890 3.5/8 6“ 080812
11 0.1910 3.5/8 6“ 080811
10 0.1935 3.5/8 6“ 080810
90.1960 3.5/8 6“ 080809
80.1990 3.5/8 6“ 080808
70.2010 3.5/8 6“ 080807
13/64 0.2031 3.5/8 6“ 081813
60.2040 3.5/8 6“ 080806
50.2055 3.5/8 6“ 080805
40.2090 3.5/8 6“ 080804
30.2130 3.5/8 6“ 080803
7/32 0.2188 3.5/8 6“ 081814
20.2210 3.3/4 6.1/8 080802
10.2280 3.3/4 6.1/8 080801
15/64 0.2344 3.3/4 6.1/8 081815
1/4 0.2500 3.3/4 6.1/8 081816
17/64 0.2656 3.7/8 6.1/4 081817
9/32 0.2812 3.7/8 6.1/4 081818
19/64 0.2969 4“ 6.3/8 081819
Ɣ Foret serie longue Ɣ Taper length drill
ƔWide-land parabolic fl ute
ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 117
www.precisiondormer.com
d1
Ø Inch d1dec.
Inch l2
Inch l1
Inch EDP #
or e-
Code
1/16 0.0625 1.3/4 3“ 055904
52 0.0635 2“ 3.3/4 050952
51 0.0670 2“ 3.3/4 050951
50 0.0700 2“ 3.3/4 050950
49 0.0730 2“ 3.3/4 050949
48 0.0760 2“ 3.3/4 050948
5/64 0.0781 2“ 3.3/4 055905
47 0.0785 2.1/4 4.1/4 050947
46 0.0810 2.1/4 4.1/4 050946
45 0.0820 2.1/4 4.1/4 050945
44 0.0860 2.1/4 4.1/4 050944
43 0.0890 2.1/4 4.1/4 050943
42 0.0935 2.1/4 4.1/4 050942
3/32 0.0938 2.1/4 4.1/4 055906
41 0.0960 2.1/2 4.5/8 050941
40 0.0980 2.1/2 4.5/8 050940
39 0.0995 2.1/2 4.5/8 050939
38 0.1015 2.1/2 4.5/8 050938
37 0.1040 2.1/2 4.5/8 050937
36 0.1065 2.1/2 4.5/8 050936
7/64 0.1094 2.1/2 4.5/8 055907
35 0.1100 2.3/4 5.1/8 050935
34 0.1110 2.3/4 5.1/8 050934
33 0.1130 2.3/4 5.1/8 050933
32 0.1160 2.3/4 5.1/8 050932
31 0.1200 2.3/4 5.1/8 050931
1/8 0.1250 2.3/4 5.1/8 055908
30 0.1285 3“ 5.3/8 050930
29 0.1360 3“ 5.3/8 050929
28 0.1405 3“ 5.3/8 050928
9/64 0.1406 3“ 5.3/8 055909
27 0.1440 3“ 5.3/8 050927
26 0.1470 3“ 5.3/8 050926
25 0.1495 3“ 5.3/8 050925
24 0.1520 3“ 5.3/8 050924
23 0.1540 3“ 5.3/8 050923
5/32 0.1562 3“ 5.3/8 055910
22 0.1570 3.3/8 5.3/4 050922
21 0.1590 3.3/8 5.3/4 050921
20 0.1610 3.3/8 5.3/4 050920
d1
Ø Inch d1dec.
Inch l2
Inch l1
Inch EDP #
or e-
Code
19 0.1660 3.3/8 5.3/4 050919
18 0.1695 3.3/8 5.3/4 050918
11/64 0.1719 3.3/8 5.3/4 055911
17 0.1730 3.3/8 5.3/4 050917
16 0.1770 3.3/8 5.3/4 050916
15 0.1800 3.3/8 5.3/4 050915
14 0.1820 3.3/8 5.3/4 050914
13 0.1850 3.3/8 5.3/4 050913
3/16 0.1875 3.3/8 5.3/4 055912
12 0.1890 3.5/8 6“ 050912
11 0.1910 3.5/8 6“ 050911
10 0.1935 3.5/8 6“ 050910
90.1960 3.5/8 6“ 050909
80.1990 3.5/8 6“ 050908
70.2010 3.5/8 6“ 050907
13/64 0.2031 3.5/8 6“ 055913
60.2040 3.5/8 6“ 050906
50.2055 3.5/8 6“ 050905
40.2090 3.5/8 6“ 050904
30.2130 3.5/8 6“ 050903
7/32 0.2188 3.5/8 6“ 055914
20.2210 3.3/4 6.1/8 050902
10.2280 3.3/4 6.1/8 050901
15/64 0.2344 3.3/4 6.1/8 055915
1/4 0.2500 3.3/4 6.1/8 055916
17/64 0.2656 3.7/8 6.1/4 055917
9/32 0.2812 3.7/8 6.1/4 055918
19/64 0.2969 4“ 6.3/8 055919
QC91G
Ŷ
Ɣ
5/16 0.3125 4“ 6.3/8 055920
21/64 0.3281 4.1/8 6.1/2 055921
11/32 0.3438 4.1/8 6.1/2 055922
23/64 0.3594 4.1/4 6.3/4 055923
3/8 0.3750 4.1/4 6.3/4 055924
25/64 0.3906 4.3/8 7“ 055925
13/32 0.4062 4.3/8 7“ 055926
27/64 0.4219 4.5/8 7.1/4 055927
7/16 0.4375 4.5/8 7.1/4 055928
29/64 0.4531 4.3/4 7.1/2 055929
15/32 0.4688 4.3/4 7.1/2 055930
31/64 0.4844 4.3/4 7.3/4 055931
1/2 0.5000 4.3/4 7.3/4 055932
Ɣ Foret serie longue Ɣ Taper length drill
ƔWide-land parabolic fl ute
ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
118 www.precisiondormer.com
QC91
ŶƔ
5/16 0.3125 4“ 6.3/8 055820
21/64 0.3281 4.1/8 6.1/2 055821
11/32 0.3438 4.1/8 6.1/2 055822
23/64 0.3594 4.1/4 6.3/4 055823
3/8 0.3750 4.1/4 6.3/4 055824
25/64 0.3906 4.3/8 7“ 055825
13/32 0.4062 4.3/8 7“ 055826
27/64 0.4219 4.5/8 7.1/4 055827
7/16 0.4375 4.5/8 7.1/4 055828
29/64 0.4531 4.3/4 7.1/2 055829
15/32 0.4688 4.3/4 7.1/2 055830
31/64 0.4844 4.3/4 7.3/4 055831
1/2 0.5000 4.3/4 7.3/4 055832
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 1.3/4 3“ 055804
52 0.0635 2“ 3.3/4 050852
51 0.0670 2“ 3.3/4 050851
50 0.0700 2“ 3.3/4 050850
49 0.0730 2“ 3.3/4 050849
48 0.0760 2“ 3.3/4 050848
5/64 0.0781 2“ 3.3/4 055805
47 0.0785 2.1/4 4.1/4 050847
46 0.0810 2.1/4 4.1/4 050846
45 0.0820 2.1/4 4.1/4 050845
44 0.0860 2.1/4 4.1/4 050844
43 0.0890 2.1/4 4.1/4 050843
42 0.0935 2.1/4 4.1/4 050842
3/32 0.0938 2.1/4 4.1/4 055806
41 0.0960 2.1/2 4.5/8 050841
40 0.0980 2.1/2 4.5/8 050840
39 0.0995 2.1/2 4.5/8 050839
38 0.1015 2.1/2 4.5/8 050838
37 0.1040 2.1/2 4.5/8 050837
36 0.1065 2.1/2 4.5/8 050836
7/64 0.1094 2.1/2 4.5/8 055807
35 0.1100 2.3/4 5.1/8 050835
34 0.1110 2.3/4 5.1/8 050834
33 0.1130 2.3/4 5.1/8 050833
32 0.1160 2.3/4 5.1/8 050832
31 0.1200 2.3/4 5.1/8 050831
1/8 0.1250 2.3/4 5.1/8 055808
30 0.1285 3“ 5.3/8 050830
29 0.1360 3“ 5.3/8 050829
28 0.1405 3“ 5.3/8 050828
9/64 0.1406 3“ 5.3/8 055809
27 0.1440 3“ 5.3/8 050827
26 0.1470 3“ 5.3/8 050826
25 0.1495 3“ 5.3/8 050825
24 0.1520 3“ 5.3/8 050824
23 0.1540 3“ 5.3/8 050823
5/32 0.1562 3“ 5.3/8 055810
22 0.1570 3.3/8 5.3/4 050822
21 0.1590 3.3/8 5.3/4 050821
20 0.1610 3.3/8 5.3/4 050820
19 0.1660 3.3/8 5.3/4 050819
18 0.1695 3.3/8 5.3/4 050818
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
11/64 0.1719 3.3/8 5.3/4 055811
17 0.1730 3.3/8 5.3/4 050817
16 0.1770 3.3/8 5.3/4 050816
15 0.1800 3.3/8 5.3/4 050815
14 0.1820 3.3/8 5.3/4 050814
13 0.1850 3.3/8 5.3/4 050813
3/16 0.1875 3.3/8 5.3/4 055812
12 0.1890 3.5/8 6“ 050812
11 0.1910 3.5/8 6“ 050811
10 0.1935 3.5/8 6“ 050810
90.1960 3.5/8 6“ 050809
80.1990 3.5/8 6“ 050808
70.2010 3.5/8 6“ 050807
13/64 0.2031 3.5/8 6“ 055813
60.2040 3.5/8 6“ 050806
50.2055 3.5/8 6“ 050805
40.2090 3.5/8 6“ 050804
30.2130 3.5/8 6“ 050803
7/32 0.2188 3.5/8 6“ 055814
20.2210 3.3/4 6.1/8 050802
10.2280 3.3/4 6.1/8 050801
15/64 0.2344 3.3/4 6.1/8 055815
1/4 0.2500 3.3/4 6.1/8 055816
17/64 0.2656 3.7/8 6.1/4 055817
9/32 0.2812 3.7/8 6.1/4 055818
19/64 0.2969 4“ 6.3/8 055819
Ɣ Foret serie longue Ɣ Taper length drill
ƔWide-land parabolic fl ute
ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 119
www.precisiondormer.com
QC91P
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 1.3/4 3“ 057904
52 0.0635 2“ 3.3/4 059452
51 0.0670 2“ 3.3/4 059451
50 0.0700 2“ 3.3/4 059450
49 0.0730 2“ 3.3/4 059449
48 0.0760 2“ 3.3/4 059448
5/64 0.0781 2“ 3.3/4 057905
47 0.0785 2.1/4 4.1/4 059447
46 0.0810 2.1/4 4.1/4 059446
45 0.0820 2.1/4 4.1/4 059445
44 0.0860 2.1/4 4.1/4 059444
43 0.0890 2.1/4 4.1/4 059443
42 0.0935 2.1/4 4.1/4 059442
3/32 0.0938 2.1/4 4.1/4 057906
41 0.0960 2.1/2 4.5/8 059441
40 0.0980 2.1/2 4.5/8 059440
39 0.0995 2.1/2 4.5/8 059439
38 0.1015 2.1/2 4.5/8 059438
37 0.1040 2.1/2 4.5/8 059437
36 0.1065 2.1/2 4.5/8 059436
7/64 0.1094 2.1/2 4.5/8 057907
35 0.1100 2.3/4 5.1/8 059435
34 0.1110 2.3/4 5.1/8 059434
33 0.1130 2.3/4 5.1/8 059433
32 0.1160 2.3/4 5.1/8 059432
31 0.1200 2.3/4 5.1/8 059431
1/8 0.1250 2.3/4 5.1/8 057908
30 0.1285 3“ 5.3/8 059430
29 0.1360 3“ 5.3/8 059429
28 0.1405 3“ 5.3/8 059428
9/64 0.1406 3“ 5.3/8 057909
27 0.1440 3“ 5.3/8 059427
26 0.1470 3“ 5.3/8 059426
25 0.1495 3“ 5.3/8 059425
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
24 0.1520 3“ 5.3/8 059424
23 0.1540 3“ 5.3/8 059423
5/32 0.1562 3“ 5.3/8 057910
22 0.1570 3.3/8 5.3/4 059422
21 0.1590 3.3/8 5.3/4 059421
20 0.1610 3.3/8 5.3/4 059420
19 0.1660 3.3/8 5.3/4 059419
18 0.1695 3.3/8 5.3/4 059418
11/64 0.1719 3.3/8 5.3/4 057911
17 0.1730 3.3/8 5.3/4 059417
16 0.1770 3.3/8 5.3/4 059416
15 0.1800 3.3/8 5.3/4 059415
14 0.1820 3.3/8 5.3/4 059414
13 0.1850 3.3/8 5.3/4 059413
3/16 0.1875 3.3/8 5.3/4 057912
12 0.1890 3.5/8 6“ 059412
11 0.1910 3.5/8 6“ 059411
10 0.1935 3.5/8 6“ 059410
90.1960 3.5/8 6“ 059409
80.1990 3.5/8 6“ 059408
70.2010 3.5/8 6“ 059407
13/64 0.2031 3.5/8 6“ 057913
60.2040 3.5/8 6“ 059406
50.2055 3.5/8 6“ 059405
40.2090 3.5/8 6“ 059404
30.2130 3.5/8 6“ 059403
7/32 0.2188 3.5/8 6“ 057914
20.2210 3.3/4 6.1/8 059402
10.2280 3.3/4 6.1/8 059401
15/64 0.2344 3.3/4 6.1/8 057915
1/4 0.2500 3.3/4 6.1/8 057916
17/64 0.2656 3.7/8 6.1/4 057917
9/32 0.2812 3.7/8 6.1/4 057918
19/64 0.2969 4“ 6.3/8 057919
Ɣ Foret serie longue Ɣ Taper length drill
ƔWide-land parabolic fl ute
ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
120 www.precisiondormer.com
QC91P - QC91GM
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
5/16 0.3125 4“ 6.3/8 057920
21/64 0.3281 4.1/8 6.1/2 057921
11/32 0.3438 4.1/8 6.1/2 057922
23/64 0.3594 4.1/4 6.3/4 057923
3/8 0.3750 4.1/4 6.3/4 057924
25/64 0.3906 4.3/8 7“ 057925
13/32 0.4062 4.3/8 7“ 057926
27/64 0.4219 4.5/8 7.1/4 057927
7/16 0.4375 4.5/8 7.1/4 057928
29/64 0.4531 4.3/4 7.1/2 057929
15/32 0.4688 4.3/4 7.1/2 057930
31/64 0.4844 4.3/4 7.3/4 057931
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/2 0.5000 4.3/4 7.3/4 057932
33/64 0.5156 4.3/4 8“ 057933
17/32 0.5312 4.3/4 8“ 057934
35/64 0.5469 4.7/8 8.1/4 057935
9/16 0.5625 4.7/8 8.1/4 057936
37/64 0.5781 4.7/8 8.3/4 057937
19/32 0.5938 4.7/8 8.3/4 057938
39/64 0.6094 4.7/8 8.3/4 057939
5/8 0.6250 4.7/8 8.3/4 057940
41/64 0.6406 5.1/8 9“ 057941
21/32 0.6562 5.1/8 9“ 057942
43/64 0.6719 5.3/8 9.1/4 057943
11/16 0.6875 5.3/8 9.1/4 057944
Ɣ Foret serie longue Ɣ Taper length drill
ƔWide-land parabolic fl ute
ƔBroca de mango conico- Serie Larga
QC91GM
Ɣ Foret serie longue Ɣ Taper length drill
ƔWide-land parabolic fl ute
ƔBroca de mango conico- Serie Larga
ŶƔ
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
1.50 0.0591 45 70 050215
2.00 0.0787 56 85 050220
2.50 0.0984 62 95 050225
3.00 0.1181 66 100 050230
3.50 0.1378 73 112 050235
4.00 0.1575 78 119 050240
4.50 0.1772 82 126 050245
5.00 0.1969 87 132 050250
5.20 0.2047 87 132 050252
5.50 0.2165 91 139 050255
5.60 0.2205 91 139 050256
6.00 0.2362 91 139 050260
6.50 0.2559 97 148 050265
6.80 0.2677 102 156 050268
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
7.00 0.2756 102 156 050270
7.50 0.2953 102 156 050275
8.00 0.3150 109 165 050280
8.20 0.3228 109 165 050282
8.50 0.3346 109 165 050285
8.60 0.3386 115 175 050286
9.00 0.3543 115 175 050290
9.50 0.3740 115 175 050295
10.00 0.3937 121 184 050300
10.50 0.4134 121 184 050305
11.00 0.4331 128 195 050310
11.50 0.4528 128 195 050315
12.00 0.4724 134 205 050320
12.50 0.4921 134 205 050325
13.00 0.5118 134 205 050330
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 121
www.precisiondormer.com
QC91M
Ŷ
Ɣ
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
1.50 0.0591 45 70 050615
2.00 0.0787 56 85 050620
2.50 0.0984 62 95 050625
3.00 0.1181 66 100 050630
3.50 0.1378 73 112 050635
4.00 0.1575 78 119 050640
4.50 0.1772 82 126 050645
5.00 0.1969 87 132 050650
5.20 0.2047 87 132 050652
5.50 0.2165 91 139 050655
5.60 0.2205 91 139 050656
6.00 0.2362 91 139 050660
6.50 0.2559 97 148 050665
6.80 0.2677 102 156 050668
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
7.00 0.2756 102 156 050670
7.50 0.2953 102 156 050675
8.00 0.3150 109 165 050680
8.20 0.3228 109 165 050682
8.50 0.3346 109 165 050685
8.60 0.3386 115 175 050686
9.00 0.3543 115 175 050690
9.50 0.3740 115 175 050695
10.00 0.3937 121 184 050700
10.50 0.4134 121 184 050705
11.00 0.4331 128 195 050710
11.50 0.4528 128 195 050715
12.00 0.4724 134 205 050720
12.50 0.4921 134 205 050725
13.00 0.5118 134 205 050730
Ɣ Foret serie longue Ɣ Taper length drill
ƔWide-land parabolic fl ute
ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
122 www.precisiondormer.com
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
1.50 0.0591 45 70 050015
2.00 0.0787 56 85 050020
2.50 0.0984 62 95 050025
3.00 0.1181 66 100 050030
3.50 0.1378 73 112 050035
4.00 0.1575 78 119 050040
4.50 0.1772 82 126 050045
5.00 0.1969 87 132 050050
5.20 0.2047 87 132 050052
5.50 0.2165 91 139 050055
5.60 0.2205 91 139 050056
6.00 0.2362 91 139 050060
6.50 0.2559 97 148 050065
6.80 0.2677 102 156 050068
7.00 0.2756 102 156 050070
7.50 0.2953 102 156 050075
8.00 0.3150 109 165 050080
8.20 0.3228 109 165 050082
8.50 0.3346 109 165 050085
8.60 0.3386 115 175 050086
d1
Ø
mm
d1
dec.
Inch l2
mm l1
mm
EDP #
or
e-Code
9.00 0.3543 115 175 050090
9.50 0.3740 115 175 050095
10.00 0.3937 121 184 050100
10.50 0.4134 121 184 050105
11.00 0.4331 128 195 050110
11.50 0.4528 128 195 050115
12.00 0.4724 134 205 050120
12.50 0.4921 134 205 050125
13.00 0.5118 134 205 050130
13.50 0.5315 140 214 050135
14.00 0.5512 140 214 050140
14.50 0.5709 144 220 050145
15.00 0.5906 144 220 050150
15.50 0.6102 149 227 050155
16.00 0.6299 149 227 050160
16.50 0.6496 154 235 050165
17.00 0.6693 154 235 050170
17.50 0.6890 158 241 050175
Ɣ
Ŷ
QC91PM
Ɣ Foret serie longue Ɣ Taper length drill
ƔWide-land parabolic fl ute
ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 123
www.precisiondormer.com
M51CO
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 1.3/4 3“ 051304
5/64 0.0781 2“ 3.3/4 051305
3/32 0.0938 2.1/4 4.1/4 051306
7/64 0.1094 2.1/2 4.5/8 051307
1/8 0.1250 2.3/4 5.1/8 051308
9/64 0.1406 3“ 5.3/8 051309
5/32 0.1562 3“ 5.3/8 051310
11/64 0.1719 3.3/8 5.3/4 051311
3/16 0.1875 3.3/8 5.3/4 051312
13/64 0.2031 3.5/8 6“ 051313
7/32 0.2188 3.5/8 6“ 051314
15/64 0.2344 3.3/4 6.1/8 051315
1/4 0.2500 3.3/4 6.1/8 051316
17/64 0.2656 3.7/8 6.1/4 051317
9/32 0.2812 3.7/8 6.1/4 051318
19/64 0.2969 4“ 6.3/8 051319
5/16 0.3125 4“ 6.3/8 051320
21/64 0.3281 4.1/8 6.1/2 051321
11/32 0.3438 4.1/8 6.1/2 051322
23/64 0.3594 4.1/4 6.3/4 051323
3/8 0.3750 4.1/4 6.3/4 051324
25/64 0.3906 4.3/8 7“ 051325
13/32 0.4062 4.3/8 7“ 051326
27/64 0.4219 4.5/8 7.1/4 051327
7/16 0.4375 4.5/8 7.1/4 051328
29/64 0.4531 4.3/4 7.1/2 051329
15/32 0.4688 4.3/4 7.1/2 051330
31/64 0.4844 4.3/4 7.3/4 051331
1/2 0.5000 4.3/4 7.3/4 051332
33/64 0.5156 4.3/4 8“ 051333 1)
17/32 0.5312 4.3/4 8“ 051334 1)
35/64 0.5469 4.7/8 8.1/4 051335 1)
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
9/16 0.5625 4.7/8 8.1/4 051336 1)
37/64 0.5781 4.7/8 8.3/4 051337 1)
19/32 0.5938 4.7/8 8.3/4 051338 1)
39/64 0.6094 4.7/8 8.3/4 051339 1)
5/8 0.6250 4.7/8 8.3/4 051340 1)
41/64 0.6406 5.1/8 9“ 051341 1)
21/32 0.6562 5.1/8 9“ 051342 1)
43/64 0.6719 5.3/8 9.1/4 051343 1)
11/16 0.6875 5.3/8 9.1/4 051344 1)
45/64 0.7031 5.5/8 9.1/2 051345 1)
23/32 0.7188 5.5/8 9.1/2 051346 1)
47/64 0.7344 5.7/8 9.3/4 051347 1)
3/4 0.7500 5.7/8 9.3/4 051348 1)
49/64 0.7656 6“ 9.7/8 051349 1)
25/32 0.7812 6“ 9.7/8 051350 1)
51/64 0.7969 6.1/8 10“ 051351 1)
13/16 0.8125 6.1/8 10“ 051352 1)
53/64 0.8281 6.1/8 10“ 051353 1)
27/32 0.8438 6.1/8 10“ 051354 1)
55/64 0.8594 6.1/8 10“ 051355 1)
7/8 0.8750 6.1/8 10“ 051356 1)
57/64 0.8906 6.1/8 10“ 051357 1)
29/32 0.9062 6.1/8 10“ 051358 1)
59/64 0.9219 6.1/8 10.3/4 051359 1)
15/16 0.9375 6.1/8 10.3/4 051360 1)
61/64 0.9531 6.3/8 11“ 051361 1)
31/32 0.9688 6.3/8 11“ 051362 1)
63/64 0.9844 6.3/8 11“ 051363 1)
1“ 1.0000 6.3/8 11“ 051364 1)
Ɣ Foret serie longue Ɣ Taper length drill ƔBroca de mango conico- Serie Larga
1) 33/64” - 1” Notched Point
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
124 www.precisiondormer.com
M52CO
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
40 0.0980 2.1/2 4.5/8 052340
39 0.0995 2.1/2 4.5/8 052339
36 0.1065 2.1/2 4.5/8 052336
35 0.1100 2.3/4 5.1/8 052335
34 0.1110 2.3/4 5.1/8 052334
33 0.1130 2.3/4 5.1/8 052333
32 0.1160 2.3/4 5.1/8 052332
31 0.1200 2.3/4 5.1/8 052331
30 0.1285 3“ 5.3/8 052330
29 0.1360 3“ 5.3/8 052329
28 0.1405 3“ 5.3/8 052328
27 0.1440 3“ 5.3/8 052327
26 0.1470 3“ 5.3/8 052326
25 0.1495 3“ 5.3/8 052325
24 0.1520 3“ 5.3/8 052324
22 0.1570 3.3/8 5.3/4 052322
21 0.1590 3.3/8 5.3/4 052321
20 0.1610 3.3/8 5.3/4 052320
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
19 0.1660 3.3/8 5.3/4 052319
18 0.1695 3.3/8 5.3/4 052318
17 0.1730 3.3/8 5.3/4 052317
16 0.1770 3.3/8 5.3/4 052316
15 0.1800 3.3/8 5.3/4 052315
14 0.1820 3.3/8 5.3/4 052314
13 0.1850 3.3/8 5.3/4 052313
12 0.1890 3.5/8 6“ 052312
11 0.1910 3.5/8 6“ 052311
10 0.1935 3.5/8 6“ 052310
90.1960 3.5/8 6“ 052309
80.1990 3.5/8 6“ 052308
70.2010 3.5/8 6“ 052307
50.2055 3.5/8 6“ 052305
40.2090 3.5/8 6“ 052304
30.2130 3.5/8 6“ 052303
20.2210 3.3/4 6.1/8 052302
10.2280 3.3/4 6.1/8 052301
Ɣ Foret serie longue Ɣ Taper length drill ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 125
www.precisiondormer.com
R53OH - R51OH
R53OH
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
3/8 0.3750 4.1/4 6.3/4 053204
13/32 0.4062 4.3/8 7“ 053206
7/16 0.4375 4.5/8 7.1/4 053208
15/32 0.4688 4.7/8 7.1/2 053210
1/2 0.5000 5“ 7.3/4 053212
17/32 0.5312 5.1/4 8“ 053214
9/16 0.5625 5.3/8 8.1/4 053216
19/32 0.5938 5.5/8 8.1/2 053218
5/8 0.6250 5.3/4 8.3/4 053220
21/32 0.6562 5.7/8 9“ 053222
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
11/16 0.6875 6“ 9.1/4 053224
23/32 0.7188 6.3/16 9.1/2 053226
3/4 0.7500 6.3/8 9.3/4 053228
25/32 0.7812 6.1/2 9.7/8 053230
13/16 0.8125 6.5/8 10“ 053232
27/32 0.8438 6.3/4 10.1/4 053234
7/8 0.8750 7“ 10.1/2 053236
29/32 0.9062 7“ 10.5/8 053238
15/16 0.9375 7“ 10.3/4 053240
31/32 0.9688 7.1/8 10.7/8 053242
1“ 1.0000 7.3/16 11“ 053244
Ɣ Foret serie longue Ɣ Taper length drill ƔBroca de mango conico- Serie Larga
1.1/16 1.0625 7.3/8 11.1/4 051248
1.1/8 1.1250 7.7/8 11.3/4 051252
1.3/16 1.1875 8.1/8 12“ 051256
1.1/4 1.2500 8.1/2 12.1/2 051260
1.5/16 1.3125 9.1/4 14.1/4 051264
R51OH
R51OH
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
13/16 0.8125 6.5/8 10“ 051232
27/32 0.8438 6.3/4 10.1/4 051234
7/8 0.8750 7“ 10.1/2 051236
29/32 0.9062 7“ 10.5/8 051238
15/16 0.9375 7“ 10.3/4 051240
31/32 0.9688 7.1/8 10.7/8 051242
1“ 1.0000 7.3/16 11“ 051244
ŶƔ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
3/8 0.3750 4.1/4 6.3/4 051204
13/32 0.4062 4.3/8 7“ 051206
7/16 0.4375 4.5/8 7.1/4 051208
15/32 0.4688 4.7/8 7.1/2 051210
1/2 0.5000 5“ 7.3/4 051212
17/32 0.5312 5.1/4 8“ 051214
9/16 0.5625 5.3/8 8.1/4 051216
19/32 0.5938 5.5/8 8.1/2 051218
5/8 0.6250 5.3/4 8.3/4 051220
21/32 0.6562 5.7/8 9“ 051222
11/16 0.6875 6“ 9.1/4 051224
23/32 0.7188 6.3/16 9.1/2 051226
3/4 0.7500 6.3/8 9.3/4 051228
25/32 0.7812 6.1/2 9.7/8 051230
Ɣ34° helix
Ɣ23° helix
Ɣ Foret serie longue Ɣ Taper length drill ƔBroca de mango conico- Serie Larga
Ɣ Notched point
Ɣ Notched point
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
126 www.precisiondormer.com
Ɣ Foret serie longue Ɣ Taper length drill ƔBroca de mango conico- Serie Larga
EZ51P
Ɣ Tanged shank
ƔParabolic fl ute
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 2“ 3“ 052404
5/64 0.0781 2.1/2 3.3/4 052405
3/32 0.0938 2.13/16 4.1/4 052406
7/64 0.1094 3.1/8 4.5/8 052407
1/8 0.1250 3.3/8 5.1/8 052408
9/64 0.1406 3.5/8 5.3/8 052409
5/32 0.1562 3.3/4 5.3/8 052410
11/64 0.1719 4.1/8 5.3/4 052411
3/16 0.1875 4.1/8 5.3/4 052412
13/64 0.2031 4.3/8 6“ 052413
7/32 0.2188 4.3/8 6“ 052414
15/64 0.2344 4.13/16 6.1/8 052415
1/4 0.2500 4.13/16 6.1/8 052416
17/64 0.2656 5“ 6.1/4 052417
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
9/32 0.2812 5“ 6.1/4 052418
19/64 0.2969 5.1/8 6.3/8 052419
5/16 0.3125 5.1/8 6.3/8 052420
21/64 0.3281 5.1/4 6.1/2 052421
11/32 0.3438 5.1/4 6.1/2 052422
23/64 0.3594 5.3/8 6.3/4 052423
3/8 0.3750 5.3/8 6.3/4 052424
25/64 0.3906 5.5/8 7“ 052425
13/32 0.4062 5.5/8 7“ 052426
27/64 0.4219 5.11/16 7.1/4 052427
7/16 0.4375 5.11/16 7.1/4 052428
29/64 0.4531 5.3/4 7.1/2 052429
15/32 0.4688 5.3/4 7.1/2 052430
31/64 0.4844 5.3/4 7.3/4 052431
1/2 0.5000 5.3/4 7.3/4 052432
1) Not tanged
1)
1)
1)
1)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 127
www.precisiondormer.com
Ɣ Notched point
Ŷ
Ɣ
d1Ø
Inch d1decimal
Inch l2
Inch l1
Inch EDP #
or e-Code
1/8 0.1250 3.3/8 5.1/8 051808
9/64 0.1406 3.5/8 5.3/8 051809
5/32 0.1562 3.3/4 5.3/8 051810
11/64 0.1719 4.1/8 5.3/4 051811
3/16 0.1875 4.1/8 5.3/4 051812
13/64 0.2031 4.3/8 6“ 051813
7/32 0.2188 4.3/8 6“ 051814
15/64 0.2344 4.13/16 6.1/8 051815
1/4 0.2500 4.13/16 6.1/8 051816
17/64 0.2656 5“ 6.1/4 051817
9/32 0.2812 5“ 6.1/4 051818
19/64 0.2969 5.1/8 6.3/8 051819
5/16 0.3125 5.1/8 6.3/8 051820
21/64 0.3281 5.1/4 6.1/2 051821
11/32 0.3438 5.1/4 6.1/2 051822
23/64 0.3594 5.3/8 6.3/4 051823
3/8 0.3750 5.3/8 6.3/4 051824
25/64 0.3906 5.5/8 7“ 051825
13/32 0.4062 5.5/8 7“ 051826
27/64 0.4219 5.11/16 7.1/4 051827
d1Ø
Inch d1decimal
Inch l2
Inch l1
Inch EDP #
or e-Code
7/16 0.4375 5.11/16 7.1/4 051828
29/64 0.4531 5.3/4 7.1/2 051829
15/32 0.4688 5.3/4 7.1/2 051830
31/64 0.4844 5.3/4 7.3/4 051831
1/2 0.5000 5.3/4 7.3/4 051832
33/64 0.5156 6“ 8“ 051833
17/32 0.5312 6“ 8“ 051834
9/16 0.5625 6.1/4 8.1/4 051836
37/64 0.5781 6.1/2 8.3/4 051837
19/32 0.5938 6.1/2 8.3/4 051838
39/64 0.6094 6.1/2 8.3/4 051839
5/8 0.6250 6.1/2 8.3/4 051840
41/64 0.6406 6.3/4 9“ 051841
21/32 0.6562 6.3/4 9“ 051842
11/16 0.6875 6.7/8 9.1/4 051844
23/32 0.7188 7.1/8 9.1/2 051846
3/4 0.7500 7.3/8 9.3/4 051848
R51K
Ɣ Tanged shank
Ɣ Foret serie longue Ɣ Taper length drill ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
128 www.precisiondormer.com
1.9/64 1.1406 7.1/4 11.7/8 051109
1.5/32 1.1562 7.1/4 11.7/8 051110
1.11/64 1.1719 7.3/8 12“ 051111
1.3/16 1.1875 7.3/8 12“ 051112
1.13/64 1.2031 7.1/2 12.1/8 051113
1.7/32 1.2188 7.1/2 12.1/8 051114
1.15/64 1.2344 7.7/8 12.1/2 051115
1.1/4 1.2500 7.7/8 12.1/2 051116
1.5/16 1.3125 8.5/8 14.1/4 051120
1.3/8 1.3750 8.7/8 14.1/2 051124
1.7/16 1.4375 9.1/8 14.3/4 051128
1.1/2 1.5000 9.3/8 15“ 051132
1.9/16 1.5625 9.5/8 15.1/4 051136
1.5/8 1.6250 9.7/8 15.5/8 051140
1.3/4 1.7500 10.1/2 16.1/4 051148
R51
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/64 0.0156 5/16 1.1/2 051001
1/32 0.0312 3/4 2“ 051002
3/64 0.0469 1.1/8 2.1/4 051003
1/16 0.0625 1.3/4 3“ 051004
5/64 0.0781 2“ 3.3/4 051005
3/32 0.0938 2.1/4 4.1/4 051006
7/64 0.1094 2.1/2 4.5/8 051007
1/8 0.1250 2.3/4 5.1/8 051008
9/64 0.1406 3“ 5.3/8 051009
5/32 0.1562 3“ 5.3/8 051010
11/64 0.1719 3.3/8 5.3/4 051011
3/16 0.1875 3.3/8 5.3/4 051012
13/64 0.2031 3.5/8 6“ 051013
7/32 0.2188 3.5/8 6“ 051014
15/64 0.2344 3.3/4 6.1/8 051015
1/4 0.2500 3.3/4 6.1/8 051016
17/64 0.2656 3.7/8 6.1/4 051017
9/32 0.2812 3.7/8 6.1/4 051018
19/64 0.2969 4“ 6.3/8 051019
5/16 0.3125 4“ 6.3/8 051020
21/64 0.3281 4.1/8 6.1/2 051021
11/32 0.3438 4.1/8 6.1/2 051022
23/64 0.3594 4.1/4 6.3/4 051023
3/8 0.3750 4.1/4 6.3/4 051024
25/64 0.3906 4.3/8 7“ 051025
13/32 0.4062 4.3/8 7“ 051026
27/64 0.4219 4.5/8 7.1/4 051027
7/16 0.4375 4.5/8 7.1/4 051028
29/64 0.4531 4.3/4 7.1/2 051029
15/32 0.4688 4.3/4 7.1/2 051030
31/64 0.4844 4.3/4 7.3/4 051031
1/2 0.5000 4.3/4 7.3/4 051032
33/64 0.5156 4.3/4 8“ 051033
17/32 0.5312 4.3/4 8“ 051034
35/64 0.5469 4.7/8 8.1/4 051035
9/16 0.5625 4.7/8 8.1/4 051036
37/64 0.5781 4.7/8 8.3/4 051037
19/32 0.5938 4.7/8 8.3/4 051038
39/64 0.6094 4.7/8 8.3/4 051039
5/8 0.6250 4.7/8 8.3/4 051040
41/64 0.6406 5.1/8 9“ 051041
21/32 0.6562 5.1/8 9“ 051042
43/64 0.6719 5.3/8 9.1/4 051043
11/16 0.6875 5.3/8 9.1/4 051044
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
45/64 0.7031 5.5/8 9.1/2 051045
23/32 0.7188 5.5/8 9.1/2 051046
47/64 0.7344 5.7/8 9.3/4 051047
3/4 0.7500 5.7/8 9.3/4 051048
49/64 0.7656 6“ 9.7/8 051049
25/32 0.7812 6“ 9.7/8 051050
51/64 0.7969 6.1/8 10“ 051051
13/16 0.8125 6.1/8 10“ 051052
53/64 0.8281 6.1/8 10“ 051053
27/32 0.8438 6.1/8 10“ 051054
55/64 0.8594 6.1/8 10“ 051055
7/8 0.8750 6.1/8 10“ 051056
57/64 0.8906 6.1/8 10“ 051057
29/32 0.9062 6.1/8 10“ 051058
59/64 0.9219 6.1/8 10.3/4 051059
15/16 0.9375 6.1/8 10.3/4 051060
61/64 0.9531 6.3/8 11“ 051061
31/32 0.9688 6.3/8 11“ 051062
63/64 0.9844 6.3/8 11“ 051063
1“ 1.0000 6.3/8 11“ 051100
1.1/64 1.0156 6.1/2 11.1/8 051101
1.1/32 1.0312 6.1/2 11.1/8 051102
1.3/64 1.0469 6.5/8 11.1/4 051103
1.1/16 1.0625 6.5/8 11.1/4 051104
1.5/64 1.0781 6.7/8 11.1/2 051105
1.3/32 1.0938 6.7/8 11.1/2 051106
1.7/64 1.1094 7.1/8 11.3/4 051107
1.1/8 1.1250 7.1/8 11.3/4 051108
Ɣ Foret serie longue Ɣ Taper length drill ƔBroca de mango conico- Serie Larga
Note: Sizes 45/64 and larger are steam oxide
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 129
www.precisiondormer.com
80.1990 3.5/8 6“ 052008
70.2010 3.5/8 6“ 052007
60.2040 3.5/8 6“ 052006
50.2055 3.5/8 6“ 052005
40.2090 3.5/8 6“ 052004
30.2130 3.5/8 6“ 052003
20.2210 3.3/4 6.1/8 052002
10.2280 3.3/4 6.1/8 052001
R52
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
80 0.0135 5/16 1.1/2 052080
79 0.0145 5/16 1.1/2 052079
78 0.0160 5/16 1.1/2 052078
77 0.0180 5/16 1.1/2 052077
76 0.0200 5/16 1.1/2 052076
75 0.0210 5/16 1.1/2 052075
74 0.0225 5/16 1.1/2 052074
73 0.0240 5/16 1.1/2 052073
72 0.0250 5/16 1.1/2 052072
71 0.0260 3/4 2“ 052071
70 0.0280 3/4 2“ 052070
69 0.0292 3/4 2“ 052069
68 0.0310 3/4 2“ 052068
67 0.0320 3/4 2“ 052067
66 0.0330 3/4 2“ 052066
65 0.0350 3/4 2“ 052065
64 0.0360 3/4 2“ 052064
63 0.0370 3/4 2“ 052063
62 0.0380 3/4 2“ 052062
61 0.0390 1.1/8 2.1/4 052061
60 0.0400 1.1/8 2.1/4 052060
59 0.0410 1.1/8 2.1/4 052059
58 0.0420 1.1/8 2.1/4 052058
57 0.0430 1.1/8 2.1/4 052057
56 0.0465 1.1/8 2.1/4 052056
55 0.0520 1.3/4 3“ 052055
54 0.0550 1.3/4 3“ 052054
53 0.0595 1.3/4 3“ 052053
52 0.0635 2“ 3.3/4 052052
51 0.0670 2“ 3.3/4 052051
50 0.0700 2“ 3.3/4 052050
49 0.0730 2“ 3.3/4 052049
48 0.0760 2“ 3.3/4 052048
47 0.0785 2.1/4 4.1/4 052047
46 0.0810 2.1/4 4.1/4 052046
45 0.0820 2.1/4 4.1/4 052045
44 0.0860 2.1/4 4.1/4 052044
43 0.0890 2.1/4 4.1/4 052043
42 0.0935 2.1/4 4.1/4 052042
41 0.0960 2.1/2 4.5/8 052041
40 0.0980 2.1/2 4.5/8 052040
39 0.0995 2.1/2 4.5/8 052039
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
38 0.1015 2.1/2 4.5/8 052038
37 0.1040 2.1/2 4.5/8 052037
36 0.1065 2.1/2 4.5/8 052036
35 0.1100 2.3/4 5.1/8 052035
34 0.1110 2.3/4 5.1/8 052034
33 0.1130 2.3/4 5.1/8 052033
32 0.1160 2.3/4 5.1/8 052032
31 0.1200 2.3/4 5.1/8 052031
30 0.1285 3“ 5.3/8 052030
29 0.1360 3“ 5.3/8 052029
28 0.1405 3“ 5.3/8 052028
27 0.1440 3“ 5.3/8 052027
26 0.1470 3“ 5.3/8 052026
25 0.1495 3“ 5.3/8 052025
24 0.1520 3“ 5.3/8 052024
23 0.1540 3“ 5.3/8 052023
22 0.1570 3.3/8 5.3/4 052022
21 0.1590 3.3/8 5.3/4 052021
20 0.1610 3.3/8 5.3/4 052020
19 0.1660 3.3/8 5.3/4 052019
18 0.1695 3.3/8 5.3/4 052018
17 0.1730 3.3/8 5.3/4 052017
16 0.1770 3.3/8 5.3/4 052016
15 0.1800 3.3/8 5.3/4 052015
14 0.1820 3.3/8 5.3/4 052014
13 0.1850 3.3/8 5.3/4 052013
12 0.1890 3.5/8 6“ 052012
11 0.1910 3.5/8 6“ 052011
10 0.1935 3.5/8 6“ 052010
90.1960 3.5/8 6“ 052009
Ɣ Foret serie longue Ɣ Taper length drill ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
130 www.precisiondormer.com
R55
Ɣ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
A0.2340 3.3/4 6.1/8 055001
B0.2380 3.3/4 6.1/8 055002
C0.2420 3.3/4 6.1/8 055003
D0.2460 3.3/4 6.1/8 055004
E0.2500 3.3/4 6.1/8 055005
F0.2570 3.7/8 6.1/4 055006
G0.2610 3.7/8 6.1/4 055007
H0.2660 3.7/8 6.1/4 055008
I0.2720 3.7/8 6.1/4 055009
J0.2770 3.7/8 6.1/4 055010
K0.2810 3.7/8 6.1/4 055011
L0.2900 4“ 6.3/8 055012
M0.2950 4“ 6.3/8 055013
N0.3020 4“ 6.3/8 055014
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
O0.3160 4.1/8 6.1/2 055015
P0.3230 4.1/8 6.1/2 055016
Q0.3320 4.1/8 6.1/2 055017
R0.3390 4.1/8 6.1/2 055018
S0.3480 4.1/4 6.3/4 055019
T0.3580 4.1/4 6.3/4 055020
U0.3680 4.1/4 6.3/4 055021
V0.3770 4.3/8 7“ 055022
W0.3860 4.3/8 7“ 055023
X0.3970 4.3/8 7“ 055024
Y0.4040 4.3/8 7“ 055025
Z0.4130 4.5/8 7.1/4 055026
Ɣ Foret serie longue Ɣ Taper length drill ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 131
www.precisiondormer.com
5ATL
Ɣ
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
1.00 0.0394 33 56 056100
1.20 0.0472 41 65 056120
1.25 0.0492 41 65 056125
1.30 0.0512 41 65 056130
1.40 0.0551 45 70 056140
1.50 0.0591 45 70 056150
1.60 0.0630 50 76 056160
1.70 0.0669 50 76 056170
1.80 0.0709 53 80 056180
1.90 0.0748 53 80 056190
2.00 0.0787 56 85 056200
2.10 0.0827 56 85 056210
2.15 0.0846 59 90 056215
2.20 0.0866 59 90 056220
2.30 0.0906 59 90 056230
2.40 0.0945 62 95 056240
2.50 0.0984 62 95 056250
3.00 0.1181 66 100 056300
3.10 0.1220 69 106 056310
3.20 0.1260 69 106 056320
3.30 0.1299 69 106 056330
3.40 0.1339 73 112 056340
3.50 0.1378 73 112 056350
3.60 0.1417 73 112 056360
3.70 0.1457 73 112 056370
3.80 0.1496 78 119 056380
4.00 0.1575 78 119 056400
4.20 0.1654 78 119 056420
4.30 0.1693 82 126 056430
4.50 0.1772 82 126 056450
4.60 0.1811 82 126 056460
4.80 0.1890 87 132 056480
5.00 0.1969 87 132 056500
5.50 0.2165 91 139 056550
5.60 0.2205 91 139 056560
5.70 0.2244 91 139 056570
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
6.00 0.2362 91 139 056600
6.40 0.2520 97 148 056640
6.50 0.2559 97 148 056650
6.80 0.2677 102 156 056680
7.00 0.2756 102 156 056770
7.20 0.2835 102 156 056720
7.50 0.2953 102 156 056750
7.80 0.3071 109 165 056780
8.00 0.3150 109 165 056800
8.20 0.3228 109 165 056820
8.50 0.3346 109 165 056850
9.00 0.3543 115 175 056900
9.20 0.3622 115 175 056920
9.50 0.3740 115 175 056950
9.80 0.3858 121 184 056980
10.00 0.3937 121 184 057100
10.20 0.4016 121 184 057102
10.50 0.4134 121 184 057105
11.00 0.4331 128 195 057110
11.20 0.4409 128 195 057112
11.50 0.4528 128 195 057115
12.00 0.4724 134 205 057120
12.50 0.4921 134 205 057125
13.00 0.5118 134 205 057130
13.50 0.5315 140 214 057135
13.80 0.5433 140 214 057138
14.00 0.5512 140 214 057140
14.50 0.5709 144 220 057145
15.00 0.5906 144 220 057150
15.50 0.6102 149 227 057155
16.00 0.6299 149 227 057160
16.50 0.6496 154 235 057165
17.00 0.6693 154 235 057170
17.50 0.6890 158 241 057175
18.00 0.7087 158 241 057180
18.50 0.7283 162 247 057185
Steam Tempered 18.00mm and above
Ɣ Foret serie longue Ɣ Taper length drill ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
132 www.precisiondormer.com
5ATL
Steam Tempered 18.00mm and above
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
19.00 0.7480 162 247 057190
19.50 0.7677 166 254 057195
20.00 0.7874 166 254 057200
20.50 0.8071 171 261 057205
21.00 0.8268 171 261 057210
21.50 0.8465 176 268 057215
22.00 0.8661 176 268 057220
22.50 0.8858 180 275 057225
23.00 0.9055 180 275 057230
23.50 0.9252 180 275 057235
24.00 0.9449 185 282 057240
24.50 0.9646 185 282 057245
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm EDP #
or
e-Code
25.00 0.9843 185 282 057250
25.50 1.0039 190 290 057255
26.00 1.0236 190 290 057260
26.50 1.0433 190 290 057265
27.00 1.0630 195 298 057270
28.00 1.1024 195 298 057280
28.50 1.1220 201 307 057285
29.00 1.1417 201 307 057290
29.50 1.1614 201 307 057295
30.00 1.1811 201 307 057300
30.50 1.2008 207 316 057305
31.00 1.2205 207 316 057310
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 133
www.precisiondormer.com
R09
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch EDP #
or e-Code
1/8 0.1250 2.3/4 5.1/8 051908
9/64 0.1406 3“ 5.3/8 051909
5/32 0.1562 3“ 5.3/8 051910
11/64 0.1719 3.3/8 5.3/4 051911
3/16 0.1875 3.3/8 5.3/4 051912
13/64 0.2031 3.5/8 6“ 051913
7/32 0.2188 3.5/8 6“ 051914
15/64 0.2344 3.3/4 6.1/8 051915
1/4 0.2500 3.3/4 6.1/8 051916
17/64 0.2656 3.7/8 6.1/4 051917
9/32 0.2812 3.7/8 6.1/4 051918
19/64 0.2969 4“ 6.3/8 051919
5/16 0.3125 4“ 6.3/8 051920
21/64 0.3281 4.1/8 6.1/2 051921
11/32 0.3438 4.1/8 6.1/2 051922
23/64 0.3594 4.1/4 6.3/4 051923
3/8 0.3750 4.1/4 6.3/4 051924
25/64 0.3906 4.3/8 7“ 051925
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch EDP #
or e-Code
13/32 0.4062 4.3/8 7“ 051926
27/64 0.4219 4.5/8 7.1/4 051927
7/16 0.4375 4.5/8 7.1/4 051928
29/64 0.4531 4.3/4 7.1/2 051929
15/32 0.4688 4.3/4 7.1/2 051930
31/64 0.4844 4.3/4 7.3/4 051931
1/2 0.5000 4.3/4 7.3/4 051932
33/64 0.5156 4.3/4 8“ 051933
17/32 0.5312 4.3/4 8“ 051934
35/64 0.5469 4.7/8 8.1/4 051935
9/16 0.5625 4.7/8 8.1/4 051936
37/64 0.5781 4.7/8 8.3/4 051937
19/32 0.5938 4.7/8 8.3/4 051938
5/8 0.6250 4.7/8 8.3/4 051940
21/32 0.6562 5.1/8 9“ 051942
43/64 0.6719 5.3/8 9.1/4 051943
11/16 0.6875 5.3/8 9.1/4 051944
Ɣ Automotive Tanged Shank
Ɣ Foret serie longue Ɣ Taper Length Drill ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
134 www.precisiondormer.com
R51FS - R52FS
R52FS
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
60 0.0400 1.1/8 2.1/4 052560
58 0.0420 1.1/8 2.1/4 052558
56 0.0465 1.1/8 2.1/4 052556
55 0.0520 1.3/4 3“ 052555
54 0.0550 1.3/4 3“ 052554
53 0.0595 1.3/4 3“ 052553
52 0.0635 2“ 3.3/4 052552
51 0.0670 2“ 3.3/4 052551
50 0.0700 2“ 3.3/4 052550
48 0.0760 2“ 3.3/4 052548
47 0.0785 2.1/4 4.1/4 052547
46 0.0810 2.1/4 4.1/4 052546
45 0.0820 2.1/4 4.1/4 052545
44 0.0860 2.1/4 4.1/4 052544
43 0.0890 2.1/4 4.1/4 052543
42 0.0935 2.1/4 4.1/4 052542
41 0.0960 2.1/2 4.5/8 052541
40 0.0980 2.1/2 4.5/8 052540
39 0.0995 2.1/2 4.5/8 052539
38 0.1015 2.1/2 4.5/8 052538
37 0.1040 2.1/2 4.5/8 052537
36 0.1065 2.1/2 4.5/8 052536
35 0.1100 2.3/4 5.1/8 052535
34 0.1110 2.3/4 5.1/8 052534
32 0.1160 2.3/4 5.1/8 052532
31 0.1200 2.3/4 5.1/8 052531
30 0.1285 3“ 5.3/8 052530
29 0.1360 3“ 5.3/8 052529
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
28 0.1405 3“ 5.3/8 052528
27 0.1440 3“ 5.3/8 052527
26 0.1470 3“ 5.3/8 052526
25 0.1495 3“ 5.3/8 052525
24 0.1520 3“ 5.3/8 052524
23 0.1540 3“ 5.3/8 052523
22 0.1570 3.3/8 5.3/4 052522
21 0.1590 3.3/8 5.3/4 052521
20 0.1610 3.3/8 5.3/4 052520
19 0.1660 3.3/8 5.3/4 052519
18 0.1695 3.3/8 5.3/4 052518
16 0.1770 3.3/8 5.3/4 052516
15 0.1800 3.3/8 5.3/4 052515
14 0.1820 3.3/8 5.3/4 052514
13 0.1850 3.3/8 5.3/4 052513
12 0.1890 3.5/8 6“ 052512
11 0.1910 3.5/8 6“ 052511
10 0.1935 3.5/8 6“ 052510
90.1960 3.5/8 6“ 052509
70.2010 3.5/8 6“ 052507
60.2040 3.5/8 6“ 052506
50.2055 3.5/8 6“ 052505
40.2090 3.5/8 6“ 052504
30.2130 3.5/8 6“ 052503
20.2210 3.3/4 6.1/8 052502
10.2280 3.3/4 6.1/8 052501
R51FS
Ŷ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/16 0.0625 1.3/4 3“ 051504
5/64 0.0781 2“ 3.3/4 051505
3/32 0.0938 2.1/4 4.1/4 051506
7/64 0.1094 2.1/2 4.5/8 051507
1/8 0.1250 2.3/4 5.1/8 051508
9/64 0.1406 3“ 5.3/8 051509
5/32 0.1562 3“ 5.3/8 051510
11/64 0.1719 3.3/8 5.3/4 051511
3/16 0.1875 3.3/8 5.3/4 051512
13/64 0.2031 3.5/8 6“ 051513
7/32 0.2188 3.5/8 6“ 051514
15/64 0.2344 3.3/4 6.1/8 051515
1/4 0.2500 3.3/4 6.1/8 051516
17/64 0.2656 3.7/8 6.1/4 051517
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
9/32 0.2812 3.7/8 6.1/4 051518
19/64 0.2969 4“ 6.3/8 051519
5/16 0.3125 4“ 6.3/8 051520
21/64 0.3281 4.1/8 6.1/2 051521
11/32 0.3438 4.1/8 6.1/2 051522
23/64 0.3594 4.1/4 6.3/4 051523
3/8 0.3750 4.1/4 6.3/4 051524
25/64 0.3906 4.3/8 7“ 051525
13/32 0.4062 4.3/8 7“ 051526
27/64 0.4219 4.5/8 7.1/4 051527
7/16 0.4375 4.5/8 7.1/4 051528
29/64 0.4531 4.3/4 7.1/2 051529
15/32 0.4688 4.3/4 7.1/2 051530
31/64 0.4844 4.3/4 7.3/4 051531
1/2 0.5000 4.3/4 7.3/4 051532
ƔHigh helix
Ɣ Foret serie longue Ɣ Taper Length Drill ƔBroca de mango conico- Serie Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 135
www.precisiondormer.com
R55FS
Ŷ
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
B0.2380 3.3/4 6.1/8 055502
C0.2420 3.3/4 6.1/8 055503
D0.2460 3.3/4 6.1/8 055504
F0.2570 3.7/8 6.1/4 055506
G0.2610 3.7/8 6.1/4 055507
I0.2720 3.7/8 6.1/4 055509
J0.2770 3.7/8 6.1/4 055510
L0.2900 4“ 6.3/8 055512
M0.2950 4“ 6.3/8 055513
N0.3020 4“ 6.3/8 055514
d1
Ø
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
O0.3160 4.1/8 6.1/2 055515
P0.3230 4.1/8 6.1/2 055516
Q0.3320 4.1/8 6.1/2 055517
R0.3390 4.1/8 6.1/2 055518
T0.3580 4.1/4 6.3/4 055520
U0.3680 4.1/4 6.3/4 055521
V0.3770 4.3/8 7“ 055522
W0.3860 4.3/8 7“ 055523
ƔHigh helix
Ɣ Foret serie longue Ɣ Taper Length Drill ƔBroca de mango conico- Serie Larga
ProdType
Icon1
Photo
Icon2
Icon3
Icon4
Icon5
Icon6
Icon7
Icon8
Icon9
Icon10
Icon11
RangeDim
LaunchLo-
goDate
Cata-
1.1 M11
1.2 M12
1.3 M13
1.4 M14
1.5 M15
1.6 M16
1.7 M17
1.8 M18
2.1 M21
2.2 M22
2.3 M23
2.4 M24
3.1 M31
3.2 M32
3.3 M33
3.4 M34
4.1 M41
4.2 M42
4.3 M43
5.1 M51
5.2 M52
5.3 M53
6.1 M61
6.2 M62
6.3 M63
6.4 M64
7.1 M71
7.2 M72
7.3 M73
7.4 M74
8.1 M81
8.2 M82
8.3 M83
9.1 M91
10.1 M101
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
www.precisiondormer.com
HSS Extra Length Drills
HSS Extra Length Drills
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Depth of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 279 U
279 = SFM
U = Alpha Code to find your Feed Rate
To calculate Cutting Feed Rate, refer to chart on pages 9-10.
Page # for easy reference
Ɣ = Good for Application
Ŷ = Excellent for Application
7
Style:
Tool Material:
Finish/Coating:
Standard:
Direction of Cut:
Depth of Cut:
Tool Length:
Helix:
Shank:
Point Angle:
Point Style:
Special Standard:
136
1
1
2
2
3
3
4
4
1
1
2
2
3
3
A976 A977 A978
138 139 139
Ɣ102C Ɣ102B Ɣ102A
Ɣ85C Ɣ85B Ɣ85A
Ŷ72C Ŷ72B Ŷ72A
Ŷ72C Ŷ72B Ŷ72A
Ŷ39A Ŷ39A Ŷ39A
Ŷ33A Ŷ33A Ŷ33A
Ɣ39B Ɣ39B Ɣ39A
Ɣ23C Ɣ23B Ɣ23A
Ɣ26A Ɣ26A Ɣ26A
Ɣ75C Ɣ75B Ɣ75A
Ɣ52C Ɣ52B Ɣ52A
Ɣ36A Ɣ36A Ɣ36A
Ɣ49C Ɣ49B Ɣ49A
Ɣ36A Ɣ36A Ɣ36A
Ɣ16A Ɣ16A Ɣ16A
Ɣ98D Ɣ98C Ɣ98B
Ɣ89D Ɣ89C Ɣ89B
Ɣ89D Ɣ89C Ɣ89B
PFX PFX PFX
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
www.precisiondormer.com
HSS Extra Length Drills
HSS Extra Length Drills(con‘t)
137
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
CO500-6
CO501-6 CO500-12
CO501-12 500-6, 501-6,
502-6 500-12, 501-12,
502-12 QC0860P QC1290P 0860 1290 1511 1813 A345
140 141 142-143 144-145 146 148 146 147 149 149 150
Ŷ98F Ŷ98F Ŷ79E Ŷ79E Ŷ79E Ŷ79E Ŷ79G
Ŷ59F Ŷ59F Ŷ72E Ŷ72E Ŷ72E Ŷ72E Ŷ72G
Ɣ82F Ɣ82F Ŷ66H Ŷ66H Ɣ52C Ɣ52C Ɣ52C Ɣ52C Ɣ56E
Ɣ66F Ɣ66F Ŷ59F Ŷ59F Ɣ49C Ɣ49C Ɣ49C Ɣ49C Ɣ49D
Ŷ43E Ŷ43E Ŷ46D Ŷ46D Ɣ20A Ɣ20A Ɣ20A Ɣ20A Ɣ20C
Ŷ20B Ŷ20B Ŷ30D Ŷ30D Ɣ16A Ɣ16A Ɣ16A Ɣ16A Ɣ16B
Ɣ95H Ɣ95H Ɣ49E Ɣ49E Ɣ89H Ɣ89H Ɣ30C Ɣ30C Ɣ30C Ɣ30C Ɣ39C
Ɣ56F Ɣ56F Ŷ26G Ŷ26G Ɣ49F Ɣ49F Ɣ13E Ɣ13E Ɣ13E Ɣ13E Ɣ13E
Ɣ56D Ɣ56D Ŷ30C Ŷ30C Ɣ49D Ɣ49D Ɣ26A Ɣ26A Ɣ26A Ɣ26A Ɣ26A
Ɣ30D Ɣ30D
Ɣ161H Ɣ161H Ɣ98I Ɣ98I Ŷ151H Ŷ151H Ɣ72G Ɣ72G Ɣ72G Ɣ72G Ɣ72G
Ɣ85H Ɣ85H Ɣ79F Ɣ79F Ŷ79H Ŷ79H Ɣ59D Ɣ59D Ɣ59D Ɣ59D Ɣ59D
Ɣ85F Ɣ85F Ɣ66E Ɣ66E Ŷ79F Ŷ79F Ɣ43C Ɣ43C Ɣ43C Ɣ43C Ɣ43C
Ŷ56D Ŷ56D Ŷ46E Ŷ46E Ɣ30C Ɣ30C Ɣ30C Ɣ30C Ɣ30C
Ŷ75F Ŷ75F Ɣ36D Ɣ36D Ɣ36D Ɣ36D Ɣ49D
Ŷ39D Ŷ39D Ɣ30B Ɣ30B Ɣ30B Ɣ30B Ɣ30B
Ŷ20D Ŷ20D Ŷ20B Ŷ20B Ɣ16A Ɣ16A Ɣ16A Ɣ16A Ɣ16A
Ŷ33G Ŷ33G Ɣ49F Ɣ49F Ɣ16E Ɣ16E Ɣ16E Ɣ16E Ɣ26E
Ŷ20B Ŷ20B Ɣ20E Ɣ20E Ɣ13C Ɣ13C Ɣ13C Ɣ13C Ɣ13C
Ɣ16B Ɣ16B Ɣ10A Ɣ10A Ɣ10A Ɣ10A Ɣ10A Ɣ10A Ɣ10A
Ɣ79D Ɣ79D Ɣ79D Ɣ79D Ɣ89D
Ɣ79H Ɣ79H Ɣ108G Ɣ108G Ɣ108G Ɣ108G Ɣ108G
Ɣ89H Ɣ89H Ɣ75H Ɣ75H Ɣ72F Ɣ72F Ɣ72F Ɣ72F Ɣ89F
Ŷ52G Ŷ52G Ɣ52D Ɣ52D Ɣ52D Ɣ52D Ɣ52D
Ɣ348H Ɣ348H Ɣ79H Ɣ79H Ɣ79H Ɣ79H Ɣ108H
Ɣ325H Ɣ325H Ɣ72G Ɣ72G Ɣ72G Ɣ72G Ɣ89G
Ɣ72F Ɣ72F Ɣ72F Ɣ72F Ɣ89F
Ŷ79F Ŷ79F Ɣ276H Ɣ276H Ɣ66E Ɣ66E Ɣ66E Ɣ66E Ɣ79F
Ɣ151D Ɣ151D Ɣ98H Ɣ98H Ɣ98H Ɣ98H Ɣ98J
Ɣ125D Ɣ125D Ɣ85F Ɣ85F Ɣ85F Ɣ85F Ɣ98H
Ɣ33D Ɣ33D Ɣ33D Ɣ33D Ɣ33F
Ɣ10B Ɣ10B Ɣ10A Ɣ10A Ɣ10A Ɣ10A Ɣ10A
Surface Feet per Minute (SFM)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
138 www.precisiondormer.com
A976
Ŷ
Ɣ
d1
Øh8
Inch
d1
Øh8
mm
d1
decimal
Inch
l2
mm
l1
mm Stock #
EDP #
or
e-Code
1.50 0.0590 75 115 0347362 A9761.5
2.00 0.0787 85 125 0148501 A9762.0X125
2.10 0.0826 85 125 0279724 A9762.1X125
2.20 0.0866 90 135 0148518 A9762.2X135
2.30 0.0905 90 135 0279717 A9762.3X135
2.40 0.0944 95 140 0279731 A9762.4X140
2.50 0.0984 95 140 0148525 A9762.5X140
2.60 0.1023 95 140 0279748 A9762.6X140
2.70 0.1062 100 150 0279755 A9762.7X150
2.80 0.1102 100 150 0279762 A9762.8X150
2.90 0.1141 100 150 0279779 A9762.9X150
3.00 0.1181 100 150 0148532 A9763.0X150
3.10 0.1220 105 155 0279786 A9763.1X155
1/8 3.18 0.1251 105 155 0347072 A9761/8
3.20 0.1259 105 155 0279793 A9763.2X155
3.30 0.1299 105 155 0148549 A9763.3X155
3.40 0.1338 115 165 0279809 A9763.4X165
3.50 0.1377 115 165 0148556 A9763.5X165
3.60 0.1417 115 165 0279816 A9763.6X165
3.70 0.1456 115 165 0148563 A9763.7X165
3.80 0.1496 120 175 0279823 A9763.8X175
3.90 0.1535 120 175 0279830 A9763.9X175
5/32 3.97 0.1562 120 175 0347089 A9765/32
4.00 0.1574 120 175 0148570 A9764.0X175
4.10 0.1614 120 175 0279847 A9764.1X175
4.20 0.1653 120 175 0279854 A9764.2X175
4.30 0.1692 125 185 0279861 A9764.3X185
4.40 0.1732 125 185 0279878 A9764.4X185
4.50 0.1771 125 185 0148587 A9764.5X185
4.60 0.1811 125 185 0279885 A9764.6X185
4.70 0.1850 125 185 0279892 A9764.7X185
3/16 4.76 0.1874 135 195 0347935 A9763/16
4.80 0.1889 135 195 0279908 A9764.8X195
4.90 0.1929 135 195 0279915 A9764.9X195
5.00 0.1968 135 195 0148594 A9765.0X195
5.10 0.2007 135 195 0279922 A9765.1X195
d1
Øh8
Inch
d1
Øh8
mm
d1
decimal
Inch
l2
mm
l1
mm Stock #
EDP #
or
e-Code
5.20 0.2047 135 195 0279939 A9765.2X195
5.30 0.2086 135 195 0279946 A9765.3X195
5.40 0.2125 140 205 0279953 A9765.4X205
5.50 0.2165 140 205 0148600 A9765.5X205
5.60 0.2204 140 205 0279960 A9765.6X205
5.70 0.2244 140 205 0279977 A9765.7X205
5.80 0.2283 140 205 0279984 A9765.8X205
5.90 0.2322 140 205 0279991 A9765.9X205
6.00 0.2362 140 205 0148617 A9766.0X205
6.10 0.2401 150 215 0280003 A9766.1X215
6.20 0.2440 150 215 0280010 A9766.2X215
6.30 0.2480 150 215 0280027 A9766.3X215
1/4 6.35 0.2500 140 205 0347096 A9761/4 1)
6.40 0.2519 150 215 0280034 A9766.4X215
6.50 0.2559 150 215 0148624 A9766.5X215
6.60 0.2598 150 215 0280041 A9766.6X215
6.70 0.2637 150 215 0280058 A9766.7X215
6.80 0.2677 155 225 0280065 A9766.8X225
6.90 0.2716 155 225 0280072 A9766.9X225
7.00 0.2755 155 225 0148631 A9767.0X225
7.50 0.2952 155 225 0148648 A9767.5X225
5/16 7.94 0.3125 165 240 0347102 A9765/16
8.00 0.3149 165 240 0148655 A9768.0X240
8.50 0.3346 165 240 0148662 A9768.5X240
11/32 8.73 0.3437 175 250 0347119 A97611/32
9.00 0.3543 175 250 0148679 A9769.0X250
9.50 0.3740 175 250 0148686 A9769.5X250
3/8 9.53 0.3751 185 265 0347126 A9763/8
10.00 0.3937 185 265 0148693 A97610.0X265
10.50 0.4133 185 265 0347133 A97610.5
11.00 0.4330 195 280 0347140 A97611.0 1)
7/16 11.11 0.4374 195 280 0347379 A9767/16 1)
11.50 0.4527 195 280 0347157 A97611.5 1)
12.00 0.4724 205 295 0347164 A97612.0 1)
12.50 0.4921 205 295 0347171 A97612.5 1)
1/2 12.70 0.5000 205 295 0347188 A9761/2 1)
13.00 0.5118 205 295 0347195 A97613.0 1)
14.00 0.5511 215 310 0347201 A97614.0 1)
1) Dormer Standard
ƔPFX extra length drill Ɣ Foret PFX extra-long ƔBroca PFX Extra Larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 139
www.precisiondormer.com
1) Dormer Standard
1) Dormer Standard
A977 - A978
A977
Ŷ
Ɣ
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch
l2
mm
l1
mm Stock #
EDP #
or
e-Code
1.50 0.0590 100 150 0347386 A9771.5
1/16 1.59 0.0625 100 150 0347393 A9771/16
2.00 0.0787 110 160 0347409 A9772.0
3/32 2.38 0.0937 115 170 0347416 A9773/32
3.00 0.1181 130 190 0148709 A9773.0X190
1/8 3.18 0.1251 135 200 0347218 A9771/8
3.50 0.1377 145 210 0148716 A9773.5X210
4.00 0.1574 150 220 0148723 A9774.0X220
4.50 0.1771 160 235 0148730 A9774.5X235
3/16 4.76 0.1874 170 245 0347225 A9773/16
5.00 0.1968 170 245 0148747 A9775.0X245
5.50 0.2165 180 260 0148754 A9775.5X260
6.00 0.2362 180 260 0148761 A9776.0X260
1/4 6.35 0.2500 180 260 0347232 A9771/4 1)
6.50 0.2559 190 275 0148778 A9776.5X275
7.00 0.2755 200 290 0148785 A9777.0X290
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch
l2
mm
l1
mm Stock #
EDP #
or
e-Code
7.50 0.2952 200 290 0148792 A9777.5X290
8.00 0.3149 210 305 0148808 A9778.0X305
8.50 0.3346 210 305 0148815 A9778.5X305
11/32 8.73 0.3437 220 320 0347249 A97711/32
9.00 0.3543 220 320 0148822 A9779.0X320
9.50 0.3740 220 320 0148839 A9779.5X320
10.00 0.3937 235 340 0148846 A97710.0X340
10.50 0.4133 235 340 0347256 A97710.5
11.00 0.4330 250 365 0347263 A97711.0 1)
11.50 0.4527 250 365 0347270 A97711.5 1)
12.00 0.4724 260 375 0347287 A97712.0 1)
12.50 0.4921 260 375 0347294 A97712.5 1)
13.00 0.5118 260 375 0347300 A97713.0 1)
14.00 0.5511 270 390 0347317 A97714.0 1)
ƔPFX extra length drill Ɣ Foret PFX extra-long ƔBroca PFX Extra Larga
A978
Ŷ
Ɣ
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch
l2
mm
l1
mm
Dormer
Stock
No.
EDP #
or
e-Code
3.00 0.1181 160 240 0347324 A9783.0
3.50 0.1377 180 265 0148853 A9783.5X265
4.00 0.1574 190 280 0148860 A9784.0X280
4.50 0.1771 200 295 0148877 A9784.5X295
5.00 0.1968 210 315 0148884 A9785.0X315
5.50 0.2165 225 330 0148891 A9785.5X330
6.00 0.2362 225 330 0148907 A9786.0X330
1/4 6.35 0.2500 225 330 0347331 A9781/4 1)
d1
Øh8
Inch
d1
Øh8
mm
d1
dec.
Inch
l2
mm
l1
mm
Dormer
Stock
No.
EDP #
or
e-Code
6.50 0.2559 235 350 0148914 A9786.5X350
7.00 0.2755 250 370 0148921 A9787.0X370
7.50 0.2952 250 370 0148938 A9787.5X370
8.00 0.3149 265 390 0148945 A9788.0X390
8.50 0.3346 265 390 0148952 A9788.5X390
9.00 0.3543 280 410 0148969 A9789.0X410
9.50 0.3740 280 410 0148976 A9789.5X410
10.00 0.3937 295 430 0148983 A97810.0X430
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
140 www.precisiondormer.com
CO500-6 - CO501-6
CO500-6
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/8 6“ 053604
5/64 0.0781 1“ 6“ 053605
3/32 0.0938 1.1/4 6“ 053606
7/64 0.1094 1.1/2 6“ 053607
1/8 0.1250 1.5/8 6“ 053608
9/64 0.1406 1.3/4 6“ 053609
5/32 0.1562 2“ 6“ 053610
11/64 0.1719 2.1/8 6“ 053611
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
3/16 0.1875 2.5/16 6“ 053612
13/64 0.2031 2.7/16 6“ 053613
7/32 0.2188 2.1/2 6“ 053614
15/64 0.2344 2.5/8 6“ 053615
1/4 0.2500 2.3/4 6“ 053616
CO501-6
d1d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
52 0.0635 7/8 6“ 053752
51 0.0670 1“ 6“ 053751
50 0.0700 1“ 6“ 053750
49 0.0730 1“ 6“ 053749
48 0.0760 1“ 6“ 053748
47 0.0785 1“ 6“ 053747
46 0.0810 1.1/8 6“ 053746
45 0.0820 1.1/8 6“ 053745
44 0.0860 1.1/8 6“ 053744
43 0.0890 1.1/4 6“ 053743
42 0.0935 1.1/4 6“ 053742
41 0.0960 1.3/8 6“ 053741
40 0.0980 1.3/8 6“ 053740
39 0.0995 1.3/8 6“ 053739
38 0.1015 1.7/16 6“ 053738
37 0.1040 1.7/16 6“ 053737
36 0.1065 1.7/16 6“ 053736
35 0.1100 1.1/2 6“ 053735
34 0.1110 1.1/2 6“ 053734
33 0.1130 1.1/2 6“ 053733
32 0.1160 1.5/8 6“ 053732
31 0.1200 1.5/8 6“ 053731
30 0.1285 1.5/8 6“ 053730
29 0.1360 1.3/4 6“ 053729
28 0.1405 1.3/4 6“ 053728
27 0.1440 1.7/8 6“ 053727
d1d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
26 0.1470 1.7/8 6“ 053726
25 0.1495 1.7/8 6“ 053725
24 0.1520 2“ 6“ 053724
23 0.1540 2“ 6“ 053723
22 0.1570 2“ 6“ 053722
21 0.1590 2.1/8 6“ 053721
20 0.1610 2.1/8 6“ 053720
19 0.1660 2.1/8 6“ 053719
18 0.1695 2.1/8 6“ 053718
17 0.1730 2.3/16 6“ 053717
16 0.1770 2.3/16 6“ 053716
15 0.1800 2.3/16 6“ 053715
14 0.1820 2.3/16 6“ 053714
13 0.1850 2.5/16 6“ 053713
12 0.1890 2.5/16 6“ 053712
11 0.1910 2.5/16 6“ 053711
10 0.1935 2.7/16 6“ 053710
90.1960 2.7/16 6“ 053709
80.1990 2.7/16 6“ 053708
70.2010 2.7/16 6“ 053707
60.2040 2.1/2 6“ 053706
50.2055 2.1/2 6“ 053705
40.2090 2.1/2 6“ 053704
30.2130 2.1/2 6“ 053703
20.2210 2.5/8 6“ 053702
10.2280 2.5/8 6“ 053701
Ɣ Foret aéronautique à queue cylindrique rallongéeƔ Aircraft extension drill ƔBroca extralarga para la industria
Aeronáutica
Ɣ Type J
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 141
www.precisiondormer.com
CO500-12 - CO501-12
CO500-12
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/16 0.0625 7/8 12“ 052604
5/64 0.0781 1“ 12“ 052605
3/32 0.0938 1.1/4 12“ 052606
7/64 0.1094 1.1/2 12“ 052607
1/8 0.1250 1.5/8 12“ 052608
9/64 0.1406 1.3/4 12“ 052609
5/32 0.1562 2“ 12“ 052610
11/64 0.1719 2.1/8 12“ 052611
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
3/16 0.1875 2.5/16 12“ 052612
13/64 0.2031 2.7/16 12“ 052613
7/32 0.2188 2.1/2 12“ 052614
15/64 0.2344 2.5/8 12“ 052615
1/4 0.2500 2.3/4 12“ 052616
Ɣ Foret aéronautique à queue cylindrique rallongée
CO501-12
Ŷ
Ɣ
d1d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
40 0.0980 1.3/8 12“ 052840
33 0.1130 1.1/2 12“ 052833
30 0.1285 1.5/8 12“ 052830
29 0.1360 1.3/4 12“ 052829
27 0.1440 1.7/8 12“ 052827
21 0.1590 2.1/8 12“ 052821
d1d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
20 0.1610 2.1/8 12“ 052820
19 0.1660 2.1/8 12“ 052819
16 0.1770 2.3/16 12“ 052816
11 0.1910 2.5/16 12“ 052811
10 0.1935 2.7/16 12“ 052810
20.2210 2.5/8 12“ 052802
Ɣ Aircraft extension drill ƔBroca extralarga para la industria
Aeronáutica
Ɣ Type J
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
142 www.precisiondormer.com
500-6 - 502-6
500-6
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
3/64 0.0469 3/4 6“ 058003 1)
1/16 0.0625 7/8 6“ 058004
5/64 0.0781 1“ 6“ 058005
3/32 0.0938 1.1/4 6“ 058006
7/64 0.1094 1.1/2 6“ 058007
1/8 0.1250 1.5/8 6“ 058008
9/64 0.1406 1.3/4 6“ 058009
5/32 0.1562 2“ 6“ 058010
11/64 0.1719 2.1/8 6“ 058011
3/16 0.1875 2.5/16 6“ 058012
13/64 0.2031 2.7/16 6“ 058013
7/32 0.2188 2.1/2 6“ 058014
15/64 0.2344 2.5/8 6“ 058015
1/4 0.2500 2.3/4 6“ 058016
17/64 0.2656 2.7/8 6“ 058017
9/32 0.2812 2.15/16 6“ 058018
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
19/64 0.2969 3.1/16 6“ 058019
5/16 0.3125 3.3/16 6“ 058020
21/64 0.3281 3.5/16 6“ 058021
11/32 0.3438 3.7/16 6“ 058022
23/64 0.3594 3.1/2 6“ 058023
3/8 0.3750 3.5/8 6“ 058024
25/64 0.3906 3.3/4 6“ 058025
13/32 0.4062 3.7/8 6“ 058026
27/64 0.4219 3.15/16 6“ 058027
7/16 0.4375 4.1/16 6“ 058028
29/64 0.4531 4.3/16 6“ 058029
15/32 0.4688 4.5/16 6“ 058030
31/64 0.4844 4.3/8 6“ 058031
1/2 0.5000 4.1/2 6“ 058032
d1d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
A0.2340 2.5/8 6“ 058201
B0.2380 2.3/4 6“ 058202
C0.2420 2.3/4 6“ 058203
D0.2460 2.3/4 6“ 058204
E0.2500 2.3/4 6“ 058205
F0.2570 2.7/8 6“ 058206
G0.2610 2.7/8 6“ 058207
H0.2660 2.7/8 6“ 058208
I0.2720 2.7/8 6“ 058209
J0.2770 2.7/8 6“ 058210
K0.2810 2.15/16 6“ 058211
L0.2900 2.15/16 6“ 058212
M0.2950 3.1/16 6“ 058213
N0.3020 3.1/16 6“ 058214
d1d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
O0.3160 3.3/16 6“ 058215
P0.3230 3.5/16 6“ 058216
Q0.3320 3.7/16 6“ 058217
R0.3390 3.7/16 6“ 058218
S0.3480 3.1/2 6“ 058219
T0.3580 3.1/2 6“ 058220
U0.3680 3.5/8 6“ 058221
V0.3770 3.5/8 6“ 058222
W0.3860 3.3/4 6“ 058223
X0.3970 3.3/4 6“ 058224
Y0.4040 3.7/8 6“ 058225
Z0.4130 3.7/8 6“ 058226
502-6 502-6
Ɣ Foret aéronautique à queue cylindrique rallongée
1) Not Split Point
Ɣ Aircraft extension drill ƔBroca extralarga para la industria
Aeronáutica
Ɣ Type B
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 143
www.precisiondormer.com
501-6
Ŷ
Ɣ
d1d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
60 0.0400 11/16 6“ 058160 1)
59 0.0410 11/16 6“ 058159 1)
58 0.0420 11/16 6“ 058158 1)
57 0.0430 3/4 6“ 058157 1)
56 0.0465 3/4 6“ 058156 1)
55 0.0520 7/8 6“ 058155 1)
54 0.0550 7/8 6“ 058154 1)
53 0.0595 7/8 6“ 058153 1)
52 0.0635 7/8 6“ 058152
51 0.0670 1“ 6“ 058151
50 0.0700 1“ 6“ 058150
49 0.0730 1“ 6“ 058149
48 0.0760 1“ 6“ 058148
47 0.0785 1“ 6“ 058147
46 0.0810 1.1/8 6“ 058146
45 0.0820 1.1/8 6“ 058145
44 0.0860 1.1/8 6“ 058144
43 0.0890 1.1/4 6“ 058143
42 0.0935 1.1/4 6“ 058142
41 0.0960 1.3/8 6“ 058141
40 0.0980 1.3/8 6“ 058140
39 0.0995 1.3/8 6“ 058139
38 0.1015 1.7/16 6“ 058138
37 0.1040 1.7/16 6“ 058137
36 0.1065 1.7/16 6“ 058136
35 0.1100 1.1/2 6“ 058135
34 0.1110 1.1/2 6“ 058134
33 0.1130 1.1/2 6“ 058133
32 0.1160 1.5/8 6“ 058132
31 0.1200 1.5/8 6“ 058131
d1d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
30 0.1285 1.5/8 6“ 058130
29 0.1360 1.3/4 6“ 058129
28 0.1405 1.3/4 6“ 058128
27 0.1440 1.7/8 6“ 058127
26 0.1470 1.7/8 6“ 058126
25 0.1495 1.7/8 6“ 058125
24 0.1520 2“ 6“ 058124
23 0.1540 2“ 6“ 058123
22 0.1570 2“ 6“ 058122
21 0.1590 2.1/8 6“ 058121
20 0.1610 2.1/8 6“ 058120
19 0.1660 2.1/8 6“ 058119
18 0.1695 2.1/8 6“ 058118
17 0.1730 2.3/16 6“ 058117
16 0.1770 2.3/16 6“ 058116
15 0.1800 2.3/16 6“ 058115
14 0.1820 2.3/16 6“ 058114
13 0.1850 2.5/16 6“ 058113
12 0.1890 2.5/16 6“ 058112
11 0.1910 2.5/16 6“ 058111
10 0.1935 2.7/16 6“ 058110
90.1960 2.7/16 6“ 058109
80.1990 2.7/16 6“ 058108
70.2010 2.7/16 6“ 058107
60.2040 2.1/2 6“ 058106
50.2055 2.1/2 6“ 058105
40.2090 2.1/2 6“ 058104
30.2130 2.1/2 6“ 058103
20.2210 2.5/8 6“ 058102
10.2280 2.5/8 6“ 058101
Ɣ Foret aéronautique à queue cylindrique rallongée
1) Not Split Point
Ɣ Aircraft extension drill ƔBroca extralarga para la industria
Aeronáutica
Ɣ Type B
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
144 www.precisiondormer.com
500-12 - 502-12
500-12
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
3/64 0.0469 3/4 12“ 059003 1)
1/16 0.0625 7/8 12“ 059004
5/64 0.0781 1“ 12“ 059005
3/32 0.0938 1.1/4 12“ 059006
7/64 0.1094 1.1/2 12“ 059007
1/8 0.1250 1.5/8 12“ 059008
9/64 0.1406 1.3/4 12“ 059009
5/32 0.1562 2“ 12“ 059010
11/64 0.1719 2.1/8 12“ 059011
3/16 0.1875 2.5/16 12“ 059012
13/64 0.2031 2.7/16 12“ 059013
7/32 0.2188 2.1/2 12“ 059014
15/64 0.2344 2.5/8 12“ 059015
1/4 0.2500 2.3/4 12“ 059016
17/64 0.2656 2.7/8 12“ 059017
9/32 0.2812 2.15/16 12“ 059018
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
19/64 0.2969 3.1/16 12“ 059019
5/16 0.3125 3.3/16 12“ 059020
21/64 0.3281 3.5/16 12“ 059021
11/32 0.3438 3.7/16 12“ 059022
23/64 0.3594 3.1/2 12“ 059023
3/8 0.3750 3.5/8 12“ 059024
25/64 0.3906 3.3/4 12“ 059025
13/32 0.4062 3.7/8 12“ 059026
27/64 0.4219 3.15/16 12“ 059027
7/16 0.4375 4.1/16 12“ 059028
29/64 0.4531 4.3/16 12“ 059029
15/32 0.4688 4.5/16 12“ 059030
31/64 0.4844 4.3/8 12“ 059031
1/2 0.5000 4.1/2 12“ 059032
502-12
d1d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
A0.2340 2.5/8 12“ 059201
B0.2380 2.3/4 12“ 059202
C0.2420 2.3/4 12“ 059203
D0.2460 2.3/4 12“ 059204
E0.2500 2.3/4 12“ 059205
F0.2570 2.7/8 12“ 059206
G0.2610 2.7/8 12“ 059207
H0.2660 2.7/8 12“ 059208
I0.2720 2.7/8 12“ 059209
J0.2770 2.7/8 12“ 059210
K0.2810 2.15/16 12“ 059211
L0.2900 2.15/16 12“ 059212
M0.2950 3.1/16 12“ 059213
N0.3020 3.1/16 12“ 059214
d1d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
O0.3160 3.3/16 12“ 059215
P0.3230 3.5/16 12“ 059216
Q0.3320 3.7/16 12“ 059217
R0.3390 3.7/16 12“ 059218
S0.3480 3.1/2 12“ 059219
T0.3580 3.1/2 12“ 059220
U0.3680 3.5/8 12“ 059221
V0.3770 3.5/8 12“ 059222
W0.3860 3.3/4 12“ 059223
X0.3970 3.3/4 12“ 059224
Y0.4040 3.7/8 12“ 059225
Z0.4130 3.7/8 12“ 059226
Ɣ Foret aéronautique à queue cylindrique rallongéeƔ Aircraft extension drill ƔBroca extralarga para la industria
Aeronáutica
1) Not Split Point
Ɣ Type B
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 145
www.precisiondormer.com
501-12
Ŷ
Ɣ
d1d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
50 0.0700 1“ 12“ 059150
49 0.0730 1“ 12“ 059149
48 0.0760 1“ 12“ 059148
47 0.0785 1“ 12“ 059147
46 0.0810 1.1/8 12“ 059146
45 0.0820 1.1/8 12“ 059145
44 0.0860 1.1/8 12“ 059144
43 0.0890 1.1/4 12“ 059143
42 0.0935 1.1/4 12“ 059142
41 0.0960 1.3/8 12“ 059141
40 0.0980 1.3/8 12“ 059140
39 0.0995 1.3/8 12“ 059139
38 0.1015 1.7/16 12“ 059138
37 0.1040 1.7/16 12“ 059137
36 0.1065 1.7/16 12“ 059136
31 0.1200 1.5/8 12“ 059131
30 0.1285 1.5/8 12“ 059130
29 0.1360 1.3/4 12“ 059129
27 0.1440 1.7/8 12“ 059127
26 0.1470 1.7/8 12“ 059126
d1d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
25 0.1495 1.7/8 12“ 059125
23 0.1540 2“ 12“ 059123
22 0.1570 2“ 12“ 059122
21 0.1590 2.1/8 12“ 059121
20 0.1610 2.1/8 12“ 059120
19 0.1660 2.1/8 12“ 059119
18 0.1695 2.1/8 12“ 059118
17 0.1730 2.3/16 12“ 059117
16 0.1770 2.3/16 12“ 059116
13 0.1850 2.5/16 12“ 059113
12 0.1890 2.5/16 12“ 059112
11 0.1910 2.5/16 12“ 059111
10 0.1935 2.7/16 12“ 059110
90.1960 2.7/16 12“ 059109
70.2010 2.7/16 12“ 059107
50.2055 2.1/2 12“ 059105
40.2090 2.1/2 12“ 059104
30.2130 2.1/2 12“ 059103
10.2280 2.5/8 12“ 059101
Ɣ Foret aéronautique à queue cylindrique rallongéeƔ Aircraft extension drill ƔBroca extralarga para la industria
Aeronáutica
Ɣ Type B
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
146 www.precisiondormer.com
0860 - QC0860P
ƔExtra length drill Ɣ Foret queue cône morse - Extra long ƔBroca serie extra larga
0860
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/8 0.1250 6“ 8“ 057408
5/32 0.1562 6“ 8“ 057410
3/16 0.1875 6“ 8“ 057412
7/32 0.2188 6“ 8“ 057414
1/4 0.2500 6“ 8“ 057416
9/32 0.2812 6“ 8“ 057418
5/16 0.3125 6“ 8“ 057420
11/32 0.3438 6“ 8“ 057422
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
3/8 0.3750 6“ 8“ 057424
13/32 0.4062 6“ 8“ 057426
7/16 0.4375 6“ 8“ 057428
15/32 0.4688 6“ 8“ 057430
1/2 0.5000 6“ 8“ 057432
QC0860P
ƔExtra Length Drill Ɣ Foret queue cône morse - Extra long ƔBroca serie extra larga
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/8 0.1250 6“ 8“ 055608
9/64 0.1406 6“ 8“ 055609
5/32 0.1562 6“ 8“ 055610
11/64 0.1719 6“ 8“ 055611
3/16 0.1875 6“ 8“ 055612
13/64 0.2031 6“ 8“ 055613
7/32 0.2188 6“ 8“ 055614
15/64 0.2344 6“ 8“ 055615
1/4 0.2500 6“ 8“ 055616
17/64 0.2656 6“ 8“ 055617
9/32 0.2812 6“ 8“ 055618
19/64 0.2969 6“ 8“ 055619
5/16 0.3125 6“ 8“ 055620
21/64 0.3281 6“ 8“ 055621
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
11/32 0.3438 6“ 8“ 055622
23/64 0.3594 6“ 8“ 055623
3/8 0.3750 6“ 8“ 055624
25/64 0.3906 6“ 8“ 055625
13/32 0.4062 6“ 8“ 055626
27/64 0.4219 6“ 8“ 055627
7/16 0.4375 6“ 8“ 055628
29/64 0.4531 6“ 8“ 055629
15/32 0.4688 6“ 8“ 055630
31/64 0.4844 6“ 8“ 055631
1/2 0.5000 6“ 8“ 055632
ƔWide-Land Parabolic Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 147
www.precisiondormer.com
1290
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/8 0.1250 9“ 12“ 059608
9/64 0.1406 9“ 12“ 059609
5/32 0.1562 9“ 12“ 059610
11/64 0.1719 9“ 12“ 059611
3/16 0.1875 9“ 12“ 059612
13/64 0.2031 9“ 12“ 059613
7/32 0.2188 9“ 12“ 059614
15/64 0.2344 9“ 12“ 059615
1/4 0.2500 9“ 12“ 059616
17/64 0.2656 9“ 12“ 059617
9/32 0.2812 9“ 12“ 059618
19/64 0.2969 9“ 12“ 059619
5/16 0.3125 9“ 12“ 059620
21/64 0.3281 9“ 12“ 059621
11/32 0.3438 9“ 12“ 059622
23/64 0.3594 9“ 12“ 059623
3/8 0.3750 9“ 12“ 059624
25/64 0.3906 9“ 12“ 059625
13/32 0.4062 9“ 12“ 059626
27/64 0.4219 9“ 12“ 059627
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
7/16 0.4375 9“ 12“ 059628
29/64 0.4531 9“ 12“ 059629
15/32 0.4688 9“ 12“ 059630
31/64 0.4844 9“ 12“ 059631
1/2 0.5000 9“ 12“ 059632
33/64 0.5156 9“ 12“ 059633
17/32 0.5312 9“ 12“ 059634
35/64 0.5469 9“ 12“ 059635
9/16 0.5625 9“ 12“ 059636
37/64 0.5781 9“ 12“ 059637
19/32 0.5938 9“ 12“ 059638
39/64 0.6094 9“ 12“ 059639
5/8 0.6250 9“ 12“ 059640
21/32 0.6562 9“ 12“ 059642
11/16 0.6875 9“ 12“ 059644
23/32 0.7188 9“ 12“ 059646
3/4 0.7500 9“ 12“ 059648
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
1)
ƔExtra Length Drill ƔForet queue cône morse - Extra long ƔBroca serie extra larga
1) 33/64” - 3/4” are Steam Oxide
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
148 www.precisiondormer.com
QC1290P
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/8 0.1250 9“ 12“ 060308
9/64 0.1406 9“ 12“ 060309
5/32 0.1562 9“ 12“ 060310
11/64 0.1719 9“ 12“ 060311
3/16 0.1875 9“ 12“ 060312
13/64 0.2031 9“ 12“ 060313
7/32 0.2188 9“ 12“ 060314
15/64 0.2344 9“ 12“ 060315
1/4 0.2500 9“ 12“ 060316
17/64 0.2656 9“ 12“ 060317
9/32 0.2812 9“ 12“ 060318
19/64 0.2969 9“ 12“ 060319
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
5/16 0.3125 9“ 12“ 060320
21/64 0.3281 9“ 12“ 060321
11/32 0.3438 9“ 12“ 060322
23/64 0.3594 9“ 12“ 060323
3/8 0.3750 9“ 12“ 060324
25/64 0.3906 9“ 12“ 060325
13/32 0.4062 9“ 12“ 060326
27/64 0.4219 9“ 12“ 060327
7/16 0.4375 9“ 12“ 060328
29/64 0.4531 9“ 12“ 060329
15/32 0.4688 9“ 12“ 060330
31/64 0.4844 9“ 12“ 060331
1/2 0.5000 9“ 12“ 060332
ƔExtra Length Drill Ɣ Foret queue cône morse - Extra long ƔBroca serie extra larga
ƔWide-Land Parabolic Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 149
www.precisiondormer.com
NOTE: 17/32” and larger are steam tempered
NOTE: 33/64” and larger are steam tempered
Ɣ Foret queue cône morse - Extra long
1813
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/4 0.2500 13“ 18“ 059716
17/64 0.2656 13“ 18“ 059717
9/32 0.2812 13“ 18“ 059718
19/64 0.2969 13“ 18“ 059719
5/16 0.3125 13“ 18“ 059720
21/64 0.3281 13“ 18“ 059721
11/32 0.3438 13“ 18“ 059722
23/64 0.3594 13“ 18“ 059723
3/8 0.3750 13“ 18“ 059724
25/64 0.3906 13“ 18“ 059725
13/32 0.4062 13“ 18“ 059726
27/64 0.4219 13“ 18“ 059727
7/16 0.4375 13“ 18“ 059728
29/64 0.4531 13“ 18“ 059729
15/32 0.4688 13“ 18“ 059730
31/64 0.4844 13“ 18“ 059731
1/2 0.5000 13“ 18“ 059732
33/64 0.5156 13“ 18“ 059733
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
17/32 0.5312 13“ 18“ 059734
35/64 0.5469 13“ 18“ 059735
9/16 0.5625 13“ 18“ 059736
37/64 0.5781 13“ 18“ 059737
19/32 0.5938 13“ 18“ 059738
39/64 0.6094 13“ 18“ 059739
5/8 0.6250 13“ 18“ 059740
21/32 0.6562 13“ 18“ 059742
11/16 0.6875 13“ 18“ 059744
23/32 0.7188 13“ 18“ 059746
3/4 0.7500 13“ 18“ 059748
25/32 0.7812 13“ 18“ 059750
13/16 0.8125 13“ 18“ 059752
7/8 0.8750 13“ 18“ 059756
15/16 0.9375 13“ 18“ 059760
1“ 1.0000 13“ 18“ 059764
1511 - 1813
1511
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
3/16 0.1875 11“ 15“ 059512
1/4 0.2500 11“ 15“ 059516
5/16 0.3125 11“ 15“ 059520
11/32 0.3438 11“ 15“ 059522
3/8 0.3750 11“ 15“ 059524
7/16 0.4375 11“ 15“ 059528
1/2 0.5000 11“ 15“ 059532
17/32 0.5312 11“ 15“ 059534
9/16 0.5625 11“ 15“ 059536
5/8 0.6250 11“ 15“ 059540
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
21/32 0.6562 11“ 15“ 059542
11/16 0.6875 11“ 15“ 059544
23/32 0.7188 11“ 15“ 059546
3/4 0.7500 11“ 15“ 059548
25/32 0.7812 11“ 15“ 059550
13/16 0.8125 11“ 15“ 059552
7/8 0.8750 11“ 15“ 059554
15/16 0.9375 11“ 15“ 059556
1“ 1.0000 11“ 15“ 059558
ƔExtra Length Drill ƔBroca serie extra larga
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
150 www.precisiondormer.com
A345
Ŷ
Ɣ
d1
Ø
Inch
d1
Ø
mm
d1
dec.
Inch
l2
mm
l1
mm MK Stock #
EDP #
or
e-Code
8.00 0.3149 165 265 1 0418383 A3458.0
8.50 0.3346 165 265 1 0418390 A3458.5
9.00 0.3543 175 275 1 0418406 A3459.0
9.50 0.3740 175 275 1 0420201 A3459.5
3/8 9.53 0.3751 185 285 1 0418307 A3453/8
10.00 0.3937 185 285 1 0418062 A34510.0
13/32 10.32 0.4062 185 285 1 0418116 A34513/32
10.50 0.4133 185 285 1 0420171 A34510.5
11.00 0.4330 195 300 1 0418079 A34511.0
7/16 11.11 0.4374 195 300 1 0418369 A3457/16
11.50 0.4527 195 300 1 0419564 A34511.5
29/64 11.51 0.4531 205 310 1 0418284 A34529/64
12.00 0.4724 205 310 1 0418093 A34512.0
12.50 0.4921 205 310 1 0419571 A34512.5
1/2 12.70 0.5000 205 310 1 0418055 A3451/2
13.00 0.5118 205 310 1 0418109 A34513.0
17/32 13.49 0.5311 220 325 1 0418161 A34517/32
13.50 0.5314 220 325 1 0419588 A34513.5
14.00 0.5511 220 325 1 0418123 A34514.0
9/16 14.29 0.5625 220 340 2 0418413 A3459/16
37/64 14.68 0.5779 220 340 2 0418321 A34537/64
15.00 0.5905 220 340 2 0418130 A34515.0
d1
Ø
Inch
d1
Ø
mm
d1
dec.
Inch
l2
mm
l1
mm MK Stock #
EDP #
or
e-Code
39/64 15.48 0.6094 230 355 2 0418338 A34539/64
15.50 0.6102 230 355 2 0419601 A34515.5
5/8 15.88 0.6251 230 355 2 0418352 A3455/8
16.00 0.6299 230 355 2 0418147 A34516.0
41/64 16.27 0.6405 230 355 2 0418345 A34541/64
16.50 0.6496 230 355 2 0419618 A34516.5
21/32 16.67 0.6562 230 355 2 0418215 A34521/32
17.00 0.6692 230 355 2 0418154 A34517.0
11/16 17.46 0.6874 245 370 2 0418086 A34511/16
17.50 0.6889 245 370 2 0419625 A34517.5
18.00 0.7086 245 370 2 0418178 A34518.0
18.50 0.7283 245 370 2 0419632 A34518.5
19.00 0.7480 245 370 2 0418185 A34519.0
3/4 19.05 0.7500 260 385 2 0418291 A3453/4
19.50 0.7677 260 385 2 0419649 A34519.5
20.00 0.7874 260 385 2 0418192 A34520.0
20.50 260 385 2 0419656 A34520.5
21.00 0.8267 260 385 2 0418208 A34521.0
21.50 270 405 2 0419663 A34521.5
22.00 0.8661 270 405 2 0418222 A34522.0
7/8 22.23 0.8751 270 405 2 0418376 A3457/8
22.50 270 405 3 0419670 A34522.5
Ɣ Foret queue cône morse - Extra longƔExtra Length Drill ƔBroca serie extra larga
Ɣ Taper shank
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 151
www.precisiondormer.com
A345
d1
Ø
Inch
d1
Ø
mm
d1
dec.
Inch
l2
mm
l1
mm MK Stock #
EDP #
or
e-Code
23.00 0.9055 270 405 3 0419687 A34523.0
23.50 270 425 3 0419694 A34523.5
24.00 0.9448 290 440 3 0418239 A34524.0
24.50 290 440 3 0419700 A34524.5
25.00 0.9842 290 440 3 0418246 A34525.0
1“ 25.40 1.0000 290 440 3 0418031 A3451
25.50 290 440 3 0419717 A34525.5
26.00 1.0236 290 440 3 0418253 A34526.0
26.50 290 440 3 0419724 A34526.5
27.00 1.0629 305 460 3 0418260 A34527.0
28.00 1.1023 305 460 3 0418277 A34528.0
29.00 305 460 3 0419731 A34529.0
30.00 1.1811 305 460 3 0418314 A34530.0
1.1/4 31.75 1.2500 320 480 3 0418048 A3451.1/4
31.00 320 480 3 0419748 A34531.0
32.00 1.2598 320 505 4 0419755 A34532.0
d1
Ø
Inch
d1
Ø
mm
d1
dec.
Inch
l2
mm
l1
mm MK Stock #
EDP #
or
e-Code
1.1/2 38.10 1.5000 360 555 4 0419540 A3451.1/2
39.00 1.5354 360 555 4 0419816 A34539.0
40.00 1.5748 360 555 4 0419823 A34540.0
41.00 1.6141 360 555 4 0419830 A34541.0
42.00 1.6535 360 555 4 0419847 A34542.0
1.3/4 44.45 1.7500 385 585 4 0419557 A3451.3/4
45.00 1.7716 385 585 4 0419854 A34545.0
48.00 1.8897 405 605 4 0419861 A34548.0
50.00 1.9685 405 605 4 0419878 A34550.0
33.00 1.2992 320 505 4 0422564 A34533.0
34.00 1.3385 340 530 4 0419762 A34534.0
35.00 1.3779 340 530 4 0419779 A34535.0
36.00 1.4173 340 530 4 0419786 A34536.0
37.00 1.4566 340 530 4 0419793 A34537.0
38.00 1.4960 360 555 4 0419809 A34538.0
ProdType
Icon1
Photo
Icon2
Icon3
Icon4
Icon5
Icon6
Icon7
Icon8
Icon9
Icon10
Icon11
RangeDim
LaunchLo-
goDate
Cata-
1.1 M11
1.2 M12
1.3 M13
1.4 M14
1.5 M15
1.6 M16
1.7 M17
1.8 M18
2.1 M21
2.2 M22
2.3 M23
2.4 M24
3.1 M31
3.2 M32
3.3 M33
3.4 M34
4.1 M41
4.2 M42
4.3 M43
5.1 M51
5.2 M52
5.3 M53
6.1 M61
6.2 M62
6.3 M63
6.4 M64
7.1 M71
7.2 M72
7.3 M73
7.4 M74
8.1 M81
8.2 M82
8.3 M83
9.1 M91
10.1 M101
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
www.precisiondormer.com
HSS Taper/Reduced Shank Drills
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Depth of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 279 U
279 = SFM
U = Alpha Code to find your Feed Rate
To calculate Cutting Feed Rate, refer to chart on page 9-10.
Page # for easy reference
Ɣ = Good for Application
Ŷ = Excellent for Application
Style:
Tool Material:
Finish/Coating:
Standard:
Direction of Cut:
Depth of Cut:
Tool Length:
Helix:
Shank:
Point Angle:
Point Style:
HSS Taper/Reduced Shank Drills
152
1
1
2
2
3
3
4
4
1
1
2
2
3
3
209CO 209OH 209 L209
154 155 156 158
Ɣ115J Ŷ154F Ŷ115I Ŷ115I
Ɣ98H Ŷ75F Ŷ98I Ŷ98I
Ɣ89G Ŷ98H Ŷ82F Ŷ82F
Ɣ75F Ŷ85F Ŷ66F Ŷ66F
Ŷ56E Ɣ59D Ɣ39E Ɣ39E
Ŷ33D Ɣ30B Ɣ30D Ɣ30D
Ɣ79E Ɣ118H Ɣ49E Ɣ49E
Ŷ36G Ɣ66F Ɣ30G Ɣ30G
Ŷ56C Ɣ66D Ɣ33C Ɣ33C
Ɣ49D
Ɣ115J Ŷ180H Ŷ98I Ŷ98I
Ɣ92G Ŷ108H Ŷ79E Ŷ79E
Ɣ72E Ɣ134F Ɣ66E Ɣ66E
Ŷ56E Ɣ75D Ɣ46E Ɣ46E
Ɣ92G Ɣ108H Ɣ75F Ɣ75F
Ɣ66D Ɣ98F Ɣ43D Ɣ43D
Ɣ36C Ɣ26D Ɣ23B Ɣ23B
Ɣ49G Ɣ75F Ɣ33G Ɣ33G
Ɣ23E Ɣ23E Ɣ23E
Ɣ20B Ɣ13A Ɣ13A
Ɣ125L Ɣ108F Ɣ108F
Ɣ131J Ɣ115I Ɣ115I
Ɣ89H Ɣ115H Ɣ115H
Ɣ69F Ɣ52F Ɣ52F
Ɣ108J Ɣ85J Ɣ85J
Ɣ98I Ɣ98I Ɣ98I
Ɣ98H Ɣ92H Ɣ92H
Ɣ89F Ɣ75H Ɣ75H
Ɣ115K Ɣ98K Ɣ98K
Ɣ92J Ɣ92J Ɣ92J
Ɣ66H Ɣ46H Ɣ46H
Ɣ16C Ɣ10B Ɣ10B
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
www.precisiondormer.com
HSS Taper/Reduced Shank Drills
153
HSS Taper/Reduced Shank Drills (con‘t)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
S209 5ATS R56CO R56 R57 R58
159 160 162 163 164 165
Ŷ115I Ŷ115I Ɣ115H Ɣ115H Ɣ115H Ŷ98F
Ŷ98I Ŷ98I Ɣ98H Ɣ98H Ɣ98H Ŷ59F
Ŷ82F Ŷ82F Ɣ82F Ɣ82F Ɣ82F Ŷ66H
Ŷ66F Ŷ66F Ɣ66E Ɣ66E Ɣ66E Ŷ59F
Ɣ39E Ɣ39E Ɣ43D Ɣ43D Ɣ43D Ɣ46D
Ɣ30D Ɣ30D Ɣ30C Ɣ30C Ɣ30C
Ɣ49E Ɣ49E Ɣ49D Ɣ49D Ɣ49D Ɣ89H
Ɣ30G Ɣ30G Ɣ23F Ɣ23F Ɣ23F Ɣ49F
Ɣ33C Ɣ33C Ɣ23B Ɣ23B Ɣ23B Ɣ49D
Ŷ98I Ŷ98I Ɣ89H Ɣ89H Ɣ89H Ŷ151H
Ŷ79E Ŷ79E Ɣ72E Ɣ72E Ɣ72E Ŷ79H
Ɣ66E Ɣ66E Ɣ62D Ɣ62D Ɣ62D Ɣ79F
Ɣ46E Ɣ46E Ɣ39D Ɣ39D Ɣ39D
Ɣ75F Ɣ75F Ɣ56E Ɣ56E Ɣ56E Ɣ89H
Ɣ43D Ɣ43D Ɣ30C Ɣ30C Ɣ30C Ɣ49F
Ɣ23B Ɣ23B Ɣ16A Ɣ16A Ɣ16A
Ɣ33G Ɣ33G Ɣ26F Ɣ26F Ɣ26F Ɣ49F
Ɣ23E Ɣ23E Ɣ13D Ɣ13D Ɣ13D Ɣ23F
Ɣ13A Ɣ13A Ɣ10A Ɣ10A Ɣ10A Ɣ13B
Ɣ108F Ɣ108F Ɣ115F Ɣ115F Ɣ115F Ɣ108F
Ɣ115I Ɣ115I Ɣ108H Ɣ108H Ɣ108H Ɣ115H
Ɣ115H Ɣ115H Ɣ89G Ɣ89G Ɣ89G Ɣ115H
Ɣ52F Ɣ52F Ɣ52F Ɣ52F Ɣ52F Ɣ52F
Ɣ85J Ɣ85J Ɣ108I Ɣ108I Ɣ108I Ɣ85I
Ɣ98I Ɣ98I Ɣ98H Ɣ98H Ɣ98H Ɣ98H
Ɣ92H Ɣ92H Ɣ89G Ɣ89G Ɣ89G Ɣ92H
Ɣ75H Ɣ75H Ɣ72G Ɣ72G Ɣ72G Ɣ75H
Ɣ98K Ɣ98K Ɣ98I Ɣ98I Ɣ98I Ɣ98I
Ɣ92J Ɣ92J Ɣ92G Ɣ92G Ɣ92G Ɣ92I
Ɣ46H Ɣ46H Ɣ46E Ɣ46E Ɣ46E Ɣ46H
Ɣ10B Ɣ10B Ɣ10A Ɣ10A Ɣ10A Ɣ10B
Surface Feet per Minute (SFM)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
154 www.precisiondormer.com
209CO
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch MTS
EDP #
or
e-Code
1/4 0.2500 2.7/8 6.1/8 1 021316
9/32 0.2812 3“ 6.1/4 1 021318
5/16 0.3125 3.1/8 6.3/8 1 021320
11/32 0.3438 3.1/4 6.1/2 1 021322
3/8 0.3750 3.1/2 7.3/8 2 021324
13/32 0.4062 3.5/8 7.1/2 2 021326
27/64 0.4219 3.7/8 7.3/4 2 021327
7/16 0.4375 3.7/8 7.3/4 2 021328
29/64 0.4531 4.1/8 8“ 2 021329
15/32 0.4688 4.1/8 8“ 2 021330
31/64 0.4844 4.3/8 8.1/4 2 021331
1/2 0.5000 4.3/8 8.1/4 2 021332
33/64 0.5156 4.5/8 8.1/2 2 021333
17/32 0.5312 4.5/8 8.1/2 2 021334
35/64 0.5469 4.7/8 8.3/4 2 021335
9/16 0.5625 4.7/8 8.3/4 2 021336
37/64 0.5781 4.7/8 8.3/4 2 021337
19/32 0.5938 4.7/8 8.3/4 2 021338
39/64 0.6094 4.7/8 8.3/4 2 021339
5/8 0.6250 4.7/8 8.3/4 2 021340
41/64 0.6406 5.1/8 9“ 2 021341
21/32 0.6562 5.1/8 9.3/4 3 021342
43/64 0.6719 5.3/8 10“ 3 021343
11/16 0.6875 5.3/8 10“ 3 021344
45/64 0.7031 5.5/8 10.1/4 3 021345
23/32 0.7188 5.5/8 10.1/4 3 021348
47/64 0.7344 5.7/8 10.1/2 3 021347
3/4 0.7500 5.7/8 10.1/2 3 021350
49/64 0.7656 6“ 10.5/8 3 021349
25/32 0.7812 6“ 10.5/8 3 021352
51/64 0.7969 6.1/8 10.3/4 3 021351
13/16 0.8125 6.1/8 10.3/4 3 021354
53/64 0.8281 6.1/8 10.3/4 3 021353
27/32 0.8438 6.1/8 10.3/4 3 021355
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch MTS
EDP #
or
e-Code
55/64 0.8594 6.1/8 10.3/4 3 021357
7/8 0.8750 6.1/8 10.3/4 3 021356
57/64 0.8906 6.1/8 10.3/4 3 021358
29/32 0.9062 6.1/8 10.3/4 3 021359
59/64 0.9219 6.1/8 10.3/4 3 021362
15/16 0.9375 6.1/8 10.3/4 3 021360
61/64 0.9531 6.3/8 11“ 3 021363
31/32 0.9688 6.3/8 11“ 3 021364
63/64 0.9844 6.3/8 11“ 3 021365
1“ 1.0000 6.3/8 11“ 3 021400
1.1/64 1.0156 6.1/2 12.1/8 4 021401
1.1/32 1.0312 6.1/2 12.1/8 4 021402
1.1/16 1.0625 6.5/8 12.1/4 4 021404
1.3/32 1.0938 6.7/8 12.1/2 4 021406
1.7/64 1.1094 7.1/8 12.3/4 4 021407
1.1/8 1.1250 7.1/8 12.3/4 4 021408
1.9/64 1.1406 7.1/4 12.7/8 4 021409
1.5/32 1.1562 7.1/4 12.7/8 4 021410
1.11/64 1.1719 7.3/8 13“ 4 021411
1.3/16 1.1875 7.3/8 13“ 4 021412
1.7/32 1.2188 7.1/2 13.1/8 4 021414
1.15/64 1.2344 7.7/8 13.1/2 4 021415
1.1/4 1.2500 7.7/8 13.1/2 4 021416
1.9/32 1.2812 8.1/2 14.1/8 4 021418
1.19/64 1.2969 8.5/8 14.1/4 4 021419
1.5/16 1.3125 8.5/8 14.1/4 4 021420
1.11/32 1.3438 8.3/4 14.3/8 4 021422
1.23/64 1.3594 8.7/8 14.1/2 4 021423
1.3/8 1.3750 8.7/8 14.1/2 4 021424
1.27/64 1.4219 9.1/8 14.3/4 4 021427
1.7/16 1.4375 9.1/8 14.3/4 4 021428
1.15/32 1.4688 9.1/4 14.7/8 4 021430
1.31/64 1.4844 9.3/8 15“ 4 021431
1.1/2 1.5000 9.3/8 15“ 4 021432
Ɣ Taper shank drill Ɣ Foret queue cône morse ƔBroca de mango cónico
ƔNotched point
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 155
www.precisiondormer.com
Ɣ Foret queue cône morse
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch MTS
EDP #
or
e-Code
1/2 0.5000 4.3/8 9“ 3 021632
9/16 0.5625 4.7/8 9.1/2 3 021636
5/8 0.6250 4.7/8 9.1/2 3 021640
11/16 0.6875 5.3/8 10“ 3 021644
3/4 0.7500 5.7/8 10.1/2 3 021648
13/16 0.8125 6.1/8 10.3/4 3 021652
7/8 0.8750 6.1/8 10.3/4 3 021656
29/32 0.9062 6.1/8 10.3/4 3 021658
15/16 0.9375 6.1/8 10.3/4 3 021660
31/32 0.9688 6.3/8 11“ 3 021662
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch MTS
EDP #
or
e-Code
1“ 1.0000 6.3/8 11“ 3 021700
1.1/32 1.0312 6.1/2 11.1/8 3 021702
1.1/16 1.0625 6.5/8 11.1/4 3 021704
1.3/32 1.0938 6.7/8 12.1/2 4 021706
1.1/8 1.1250 7.1/8 12.3/4 4 021708
1.5/32 1.1562 7.1/4 12.7/8 4 021710
1.3/16 1.1875 7.3/8 13“ 4 021712
1.7/32 1.2188 7.1/2 13.1/8 4 021714
1.1/4 1.2500 7.7/8 13.1/2 4 021716
209OH
Ɣ Taper shank drill ƔBroca de mango cónico
Ɣ32° helix
ƔNotched point
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
156 www.precisiondormer.com
209
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch MTS
EDP #
or
e-Code
1/8 0.1250 1.7/8 5.1/8 1 020008
9/64 0.1406 2.1/8 5.3/8 1 020009
5/32 0.1562 2.1/8 5.3/8 1 020010
11/64 0.1719 2.1/2 5.3/4 1 020011
3/16 0.1875 2.1/2 5.3/4 1 020012
13/64 0.2031 2.3/4 6“ 1 020013
7/32 0.2188 2.3/4 6“ 1 020014
15/64 0.2344 2.7/8 6.1/8 1 020015
1/4 0.2500 2.7/8 6.1/8 1 020016
17/64 0.2656 3“ 6.1/4 1 020017
9/32 0.2812 3“ 6.1/4 1 020018
19/64 0.2969 3.1/8 6.3/8 1 020019
5/16 0.3125 3.1/8 6.3/8 1 020020
21/64 0.3281 3.1/4 6.1/2 1 020021
11/32 0.3438 3.1/4 6.1/2 1 020022
23/64 0.3594 3.1/2 6.3/4 1 020023
3/8 0.3750 3.1/2 6.3/4 1 020024
25/64 0.3906 3.5/8 7“ 1 020025
13/32 0.4062 3.5/8 7“ 1 020026
27/64 0.4219 3.7/8 7.1/4 1 020027
7/16 0.4375 3.7/8 7.1/4 1 020028
29/64 0.4531 4.1/8 7.1/2 1 020029
15/32 0.4688 4.1/8 7.1/2 1 020030
31/64 0.4844 4.3/8 8.1/4 2 020031
1/2 0.5000 4.3/8 8.1/4 2 020032
33/64 0.5156 4.5/8 8.1/2 2 020033
17/32 0.5312 4.5/8 8.1/2 2 020034
35/64 0.5469 4.7/8 8.3/4 2 020035
9/16 0.5625 4.7/8 8.3/4 2 020036
37/64 0.5781 4.7/8 8.3/4 2 020037
19/32 0.5938 4.7/8 8.3/4 2 020038
39/64 0.6094 4.7/8 8.3/4 2 020039
5/8 0.6250 4.7/8 8.3/4 2 020040
41/64 0.6406 5.1/8 9“ 2 020041
21/32 0.6562 5.1/8 9“ 2 020042
43/64 0.6719 5.3/8 9.1/4 2 020043
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch MTS
EDP #
or
e-Code
11/16 0.6875 5.3/8 9.1/4 2 020044
45/64 0.7031 5.5/8 9.1/2 2 020045
23/32 0.7188 5.5/8 9.1/2 2 020046
47/64 0.7344 5.7/8 9.3/4 2 020047
3/4 0.7500 5.7/8 9.3/4 2 020048
49/64 0.7656 6“ 9.7/8 2 020049
25/32 0.7812 6“ 9.7/8 2 020050
51/64 0.7969 6.1/8 10.3/4 3 020051
13/16 0.8125 6.1/8 10.3/4 3 020052
53/64 0.8281 6.1/8 10.3/4 3 020053
27/32 0.8438 6.1/8 10.3/4 3 020054
55/64 0.8594 6.1/8 10.3/4 3 020055
7/8 0.8750 6.1/8 10.3/4 3 020056
57/64 0.8906 6.1/8 10.3/4 3 020057
29/32 0.9062 6.1/8 10.3/4 3 020058
59/64 0.9219 6.1/8 10.3/4 3 020059
15/16 0.9375 6.1/8 10.3/4 3 020060
61/64 0.9531 6.3/8 11“ 3 020061
31/32 0.9688 6.3/8 11“ 3 020062
63/64 0.9844 6.3/8 11“ 3 020063
1“ 1.0000 6.3/8 11“ 3 020100
1.1/64 1.0156 6.1/2 11.1/8 3 020101
1.1/32 1.0312 6.1/2 11.1/8 3 020102
1.3/64 1.0469 6.5/8 11.1/4 3 020103
1.1/16 1.0625 6.5/8 11.1/4 3 020104
1.5/64 1.0781 6.7/8 12.1/2 4 020105
1.3/32 1.0938 6.7/8 12.1/2 4 020106
1.7/64 1.1094 7.1/8 12.3/4 4 020107
1.1/8 1.1250 7.1/8 12.3/4 4 020108
1.9/64 1.1406 7.1/4 12.7/8 4 020109
1.5/32 1.1562 7.1/4 12.7/8 4 020110
1.11/64 1.1719 7.3/8 13“ 4 020111
1.3/16 1.1875 7.3/8 13“ 4 020112
1.13/64 1.2031 7.1/2 13.1/8 4 020113
1.7/32 1.2188 7.1/2 13.1/8 4 020114
1.15/64 1.2344 7.7/8 13.1/2 4 020115
Ɣ Foret queue cône morseƔ Taper shank drill ƔBroca de mango cónico
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 157
www.precisiondormer.com
209
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch MTS
EDP #
or
e-Code
1.1/4 1.2500 7.7/8 13.1/2 4 020116
1.17/64 1.2656 8.1/2 14.1/8 4 020117
1.9/32 1.2812 8.1/2 14.1/8 4 020118
1.19/64 1.2969 8.5/8 14.1/4 4 020119
1.5/16 1.3125 8.5/8 14.1/4 4 020120
1.21/64 1.3281 8.3/4 14.3/8 4 020121
1.11/32 1.3438 8.3/4 14.3/8 4 020122
1.23/64 1.3594 8.7/8 14.1/2 4 020123
1.3/8 1.3750 8.7/8 14.1/2 4 020124
1.25/64 1.3906 9“ 14.5/8 4 020125
1.13/32 1.4062 9“ 14.5/8 4 020126
1.27/64 1.4219 9.1/8 14.3/4 4 020127
1.7/16 1.4375 9.1/8 14.3/4 4 020128
1.29/64 1.4531 9.1/4 14.7/8 4 020129
1.15/32 1.4688 9.1/4 14.7/8 4 020130
1.31/64 1.4844 9.3/8 15“ 4 020131
1.1/2 1.5000 9.3/8 15“ 4 020132
1.17/32 1.5312 9.3/8 16.3/8 5 020134
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch MTS
EDP #
or
e-Code
1.9/16 1.5625 9.5/8 16.5/8 5 020136
1.19/32 1.5938 9.7/8 16.7/8 5 020138
1.5/8 1.6250 10“ 17“ 5 020140
1.21/32 1.6562 10.1/8 17.1/8 5 020142
1.11/16 1.6875 10.1/8 17.1/8 5 020144
1.23/32 1.7188 10.1/8 17.1/8 5 020146
1.3/4 1.7500 10.1/8 17.1/8 5 020148
1.25/32 1.7812 10.1/8 17.1/8 5 020150
1.13/16 1.8125 10.1/8 17.1/8 5 020152
1.27/32 1.8438 10.1/8 17.1/8 5 020154
1.7/8 1.8750 10.3/8 17.3/8 5 020156
1.29/32 1.9062 10.3/8 17.3/8 5 020158
1.15/16 1.9375 10.3/8 17.3/8 5 020160
1.31/32 1.9688 10.3/8 17.3/8 5 020162
2“ 2.0000 10.3/8 17.3/8 5 020200
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
158 www.precisiondormer.com
L209
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch MTS
EDP #
or
e-Code
3/8 0.3750 3.1/2 7.3/8 2 022524
25/64 0.3906 3.5/8 7.1/2 2 022525
13/32 0.4062 3.5/8 7.1/2 2 022526
27/64 0.4219 3.7/8 7.3/4 2 022527
7/16 0.4375 3.7/8 7.3/4 2 022528
29/64 0.4531 4.1/8 8“ 2 022529
15/32 0.4688 4.1/8 8“ 2 022530
41/64 0.6406 5.1/8 9.3/4 3 022541
21/32 0.6562 5.1/8 9.3/4 3 022542
43/64 0.6719 5.3/8 10“ 3 022543
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch MTS
EDP #
or
e-Code
11/16 0.6875 5.3/8 10“ 3 022544
45/64 0.7031 5.5/8 10.1/4 3 022545
23/32 0.7188 5.5/8 10.1/4 3 022546
47/64 0.7344 5.7/8 10.1/2 3 022547
3/4 0.7500 5.7/8 10.1/2 3 022548
49/64 0.7656 6“ 10.5/8 3 022549
25/32 0.7812 6“ 10.5/8 3 022550
1“ 1.0000 6.3/8 12“ 4 022600
1.1/32 1.0312 6.1/2 12.1/8 4 022602
1.1/16 1.0625 6.5/8 12.1/4 4 022604
Ɣ Foret queue cône morse
Ɣ Taper shank drill ƔBroca de mango cónico
ƔLarge shank
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 159
www.precisiondormer.com
Ɣ Foret queue cône morse
S209
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch MTS
EDP #
or
e-Code
31/64 0.4844 4.3/8 7.3/4 1 023031
1/2 0.5000 4.3/8 7.3/4 1 023032
33/64 0.5156 4.5/8 8“ 1 023033
17/32 0.5312 4.5/8 8“ 1 023034
35/64 0.5469 4.7/8 8.1/4 1 023035
9/16 0.5625 4.7/8 8.1/4 1 023036
51/64 0.7969 6.1/8 10“ 2 023051
13/16 0.8125 6.1/8 10“ 2 023052
53/64 0.8281 6.1/8 10“ 2 023053
27/32 0.8438 6.1/8 10“ 2 023054
55/64 0.8594 6.1/8 10“ 2 023055
7/8 0.8750 6.1/8 10“ 2 023056
57/64 0.8906 6.1/8 10“ 2 023057
29/32 0.9062 6.1/8 10“ 2 023058
1.5/64 1.0781 6.7/8 11.1/2 3 023105
1.3/32 1.0938 6.7/8 11.1/2 3 023106
1.7/64 1.1094 7.1/8 11.3/4 3 023107
1.1/8 1.1250 7.1/8 11.3/4 3 023108
1.9/64 1.1406 7.1/4 11.7/8 3 023109
1.5/32 1.1562 7.1/4 11.7/8 3 023110
1.11/64 1.1719 7.3/8 12“ 3 023111
1.3/16 1.1875 7.3/8 12“ 3 023112
1.13/64 1.2031 7.1/2 12.1/8 3 023113
1.7/32 1.2188 7.1/2 12.1/8 3 023114
1.15/64 1.2344 7.7/8 12.1/2 3 023115
1.1/4 1.2500 7.7/8 12.1/2 3 023116
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch MTS
EDP #
or
e-Code
1.33/64 1.5156 9.3/8 15“ 4 023133
1.17/32 1.5312 9.3/8 15“ 4 023134
1.35/64 1.5469 9.5/8 15.1/4 4 023135
1.9/16 1.5625 9.5/8 15.1/4 4 023136
1.37/64 1.5781 9.7/8 15.1/2 4 023137
1.19/32 1.5938 9.7/8 15.1/2 4 023138
1.39/64 1.6094 10“ 15.5/8 4 023139
1.5/8 1.6250 10“ 15.5/8 4 023140
1.41/64 1.6406 10.1/8 15.3/4 4 023141
1.21/32 1.6562 10.1/8 15.3/4 4 023142
1.43/64 1.6719 10.1/8 15.3/4 4 023143
1.11/16 1.6875 10.1/8 15.3/4 4 023144
1.45/64 1.7031 10.1/8 15.3/4 4 023145
1.23/32 1.7188 10.1/8 15.3/4 4 023146
1.47/64 1.7344 10.3/8 16.1/4 4 023147
1.3/4 1.7500 10.3/8 16.1/4 4 023148
1.25/32 1.7812 10.3/8 16.1/4 4 023150
1.13/16 1.8125 10.3/8 16.1/4 4 023152
1.27/32 1.8438 10.3/8 16.1/4 4 023154
1.7/8 1.8750 10.1/2 16.1/2 4 023156
1.29/32 1.9062 10.1/2 16.1/2 4 023158
1.15/16 1.9375 10.5/8 16.5/8 4 023160
1.31/32 1.9688 10.5/8 16.5/8 4 023162
2“ 2.0000 10.5/8 16.5/8 4 023200
Ɣ Taper shank drill ƔBroca de mango cónico
ƔSmall shank
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
160 www.precisiondormer.com
5ATS
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm MTS
EDP #
or
e-Code
5.00 0.1969 52 133 1 026050
5.50 0.2165 57 138 1 026055
6.00 0.2362 57 138 1 026060
6.50 0.2559 63 144 1 026065
6.80 0.2677 69 150 1 026068
7.00 0.2756 69 150 1 026070
7.50 0.2953 69 150 1 026075
8.00 0.3150 75 156 1 026080
8.50 0.3346 75 156 1 026085
9.00 0.3543 81 162 1 026090
9.50 0.3740 81 162 1 026095
10.00 0.3937 87 168 1 026100
10.20 0.4016 87 168 1 026102
10.50 0.4134 87 168 1 026105
11.00 0.4331 94 175 1 026110
11.50 0.4528 94 175 1 026115
12.00 0.4724 101 182 1 026120
12.20 0.4803 101 182 1 026122
12.50 0.4921 101 182 1 026125
12.80 0.5039 101 182 1 026128
13.00 0.5118 101 182 1 026130
13.50 0.5315 108 189 1 026135
13.80 0.5433 108 189 1 026138
14.00 0.5512 108 189 1 026140
14.25 0.5610 114 212 2 026142
14.50 0.5709 114 212 2 026145
14.75 0.5807 114 212 2 026147
15.00 0.5906 114 212 2 026150
15.25 0.6004 120 218 2 026152
15.50 0.6102 120 218 2 026155
15.75 0.6201 120 218 2 026157
16.00 0.6299 120 218 2 026160
16.25 0.6398 125 223 2 026162
16.50 0.6496 125 223 2 026165
16.75 0.6594 125 223 2 026167
17.00 0.6693 125 223 026170
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm MTS
EDP #
or
e-Code
17.25 0.6791 130 228 2 026172
17.50 0.6890 130 228 2 026175
18.00 0.7087 130 228 2 026180
18.50 0.7283 135 233 2 026185
19.00 0.7480 135 233 2 026190
19.50 0.7677 140 238 2 026195
20.00 0.7874 140 238 2 026200
20.50 0.8071 145 243 2 026205
21.00 0.8268 145 243 2 026210
21.50 0.8465 150 248 2 026215
22.00 0.8661 150 248 2 026220
22.50 0.8858 155 253 2 026225
23.00 0.9055 155 253 2 026230
23.50 0.9252 155 276 3 026235
24.00 0.9449 160 281 3 026240
24.50 0.9646 160 281 3 026245
25.00 0.9843 160 281 3 026250
25.50 1.0039 165 286 3 026255
26.00 1.0236 165 286 3 026260
26.50 1.0433 165 286 3 026265
27.00 1.0630 170 291 3 026270
27.50 1.0827 170 291 3 026275
28.00 1.1024 170 291 3 026280
28.50 1.1220 175 296 3 026285
29.00 1.1417 175 296 3 026290
29.50 1.1614 175 296 3 026295
30.00 1.1811 175 296 3 026300
30.50 1.2008 180 301 3 026305
31.00 1.2205 180 301 3 026310
31.50 1.2402 180 301 3 026315
32.00 1.2598 185 334 4 026320
32.50 1.2795 185 334 4 026325
33.00 1.2992 185 334 4 026330
33.50 1.3189 185 334 4 026335
34.00 1.3386 190 339 4 026340
34.50 1.3583 190 339 4 026345
Ɣ Foret queue cône morseƔ Taper shank drill ƔBroca de mango cónico
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 161
www.precisiondormer.com
5ATS
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm MTS
EDP #
or
e-Code
35.00 1.3780 190 339 4 026350
35.50 1.3976 190 339 4 026355
36.00 1.4173 195 344 4 026360
36.50 1.4370 195 344 4 026365
37.00 1.4567 195 344 4 026370
37.50 1.4764 195 344 4 026375
38.00 1.4961 200 349 4 026380
39.00 1.5354 200 349 4 026390
40.00 1.5748 200 349 4 026400
41.00 1.6142 205 354 4 026410
d1
Ø
mm
d1
decimal
Inch
l2
mm l1
mm MTS
EDP #
or
e-Code
42.00 1.6535 205 354 4 026420
43.00 1.6929 210 359 4 026430
44.00 1.7323 210 359 4 026440
45.00 1.7717 210 359 4 026450
47.00 1.8504 215 364 4 026470
48.00 1.8898 220 369 4 026480
49.00 1.9291 220 369 4 026490
50.00 1.9685 220 369 4 026500
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
162 www.precisiondormer.com
R56CO
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch d2
EDP #
or
e-Code
33/64 0.5156 3“ 6“ 1/2 092333
17/32 0.5312 3“ 6“ 1/2 092334
35/64 0.5469 3“ 6“ 1/2 092335
9/16 0.5625 3“ 6“ 1/2 092336
37/64 0.5781 3“ 6“ 1/2 092337
19/32 0.5938 3“ 6“ 1/2 092338
39/64 0.6094 3“ 6“ 1/2 092339
5/8 0.6250 3“ 6“ 1/2 092340
41/64 0.6406 3“ 6“ 1/2 092341
21/32 0.6562 3“ 6“ 1/2 092342
43/64 0.6719 3“ 6“ 1/2 092343
11/16 0.6875 3“ 6“ 1/2 092344
45/64 0.7031 3“ 6“ 1/2 092345
23/32 0.7188 3“ 6“ 1/2 092346
47/64 0.7344 3“ 6“ 1/2 092347
3/4 0.7500 3“ 6“ 1/2 092348
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch d2
EDP #
or
e-Code
49/64 0.7656 3“ 6“ 1/2 092349
25/32 0.7812 3“ 6“ 1/2 092350
51/64 0.7969 3“ 6“ 1/2 092351
13/16 0.8125 3“ 6“ 1/2 092352
53/64 0.8281 3“ 6“ 1/2 092353
27/32 0.8438 3“ 6“ 1/2 092354
55/64 0.8594 3“ 6“ 1/2 092355
7/8 0.8750 3“ 6“ 1/2 092356
57/64 0.8906 3“ 6“ 1/2 092357
29/32 0.9062 3“ 6“ 1/2 092358
59/64 0.9219 3“ 6“ 1/2 092359
15/16 0.9375 3“ 6“ 1/2 092360
61/64 0.9531 3“ 6“ 1/2 092361
31/32 0.9688 3“ 6“ 1/2 092362
63/64 0.9844 3“ 6“ 1/2 092363
1“ 1.0000 3“ 6“ 1/2 092364
Ɣ Foret queue dégagée de 12,7 mm
Ɣ1/2” reduced parallel shank drill
Ɣ Round shank
ƔBrocas de mango cilindrico, Mango
rebajado 1/2”
d2
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 163
www.precisiondormer.com
R56
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch
EDP #
or
e-Code
33/64 0.5156 3“ 6“ 1/2 091433
17/32 0.5312 3“ 6“ 1/2 091434
35/64 0.5469 3“ 6“ 1/2 091435
9/16 0.5625 3“ 6“ 1/2 091436
37/64 0.5781 3“ 6“ 1/2 091437
19/32 0.5938 3“ 6“ 1/2 091438
39/64 0.6094 3“ 6“ 1/2 091439
5/8 0.6250 3“ 6“ 1/2 091440
41/64 0.6406 3“ 6“ 1/2 091441
21/32 0.6562 3“ 6“ 1/2 091442
43/64 0.6719 3“ 6“ 1/2 091443
11/16 0.6875 3“ 6“ 1/2 091444
45/64 0.7031 3“ 6“ 1/2 091445
23/32 0.7188 3“ 6“ 1/2 091446
47/64 0.7344 3“ 6“ 1/2 091447
3/4 0.7500 3“ 6“ 1/2 091448
49/64 0.7656 3“ 6“ 1/2 091449
25/32 0.7812 3“ 6“ 1/2 091450
51/64 0.7969 3“ 6“ 1/2 091451
13/16 0.8125 3“ 6“ 1/2 091452
53/64 0.8281 3“ 6“ 1/2 091453
27/32 0.8438 3“ 6“ 1/2 091454
55/64 0.8594 3“ 6“ 1/2 091455
7/8 0.8750 3“ 6“ 1/2 091456
57/64 0.8906 3“ 6“ 1/2 091457
29/32 0.9062 3“ 6“ 1/2 091458
59/64 0.9219 3“ 6“ 1/2 091459
15/16 0.9375 3“ 6“ 1/2 091460
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch
EDP #
or
e-Code
61/64 0.9531 3“ 6“ 1/2 091461
31/32 0.9688 3“ 6“ 1/2 091462
63/64 0.9844 3“ 6“ 1/2 091463
1“ 1.0000 3“ 6“ 1/2 091464
1.1/64 1.0156 3“ 6“ 1/2 091465
1.1/32 1.0312 3“ 6“ 1/2 091486
1.3/64 1.0469 3“ 6“ 1/2 091467
1.1/16 1.0625 3“ 6“ 1/2 091468
1.5/64 1.0781 3“ 6“ 1/2 091469
1.3/32 1.0938 3“ 6“ 1/2 091470
1.7/64 1.1094 3“ 6“ 1/2 091471
1.1/8 1.1250 3“ 6“ 1/2 091472
1.9/64 1.1406 3“ 6“ 1/2 091473
1.5/32 1.1562 3“ 6“ 1/2 091487
1.11/64 1.1719 3“ 6“ 1/2 091474
1.3/16 1.1875 3“ 6“ 1/2 091476
1.13/64 1.2031 3“ 6“ 1/2 091475
1.7/32 1.2188 3“ 6“ 1/2 091488
1.15/64 1.2344 3“ 6“ 1/2 091477
1.1/4 1.2500 3“ 6“ 1/2 091480
1.9/32 1.2812 3“ 6“ 1/2 091479
1.5/16 1.3125 3“ 6“ 1/2 091482
1.11/32 1.3438 3“ 6“ 1/2 091497
1.3/8 1.3750 3“ 6“ 1/2 091483
1.13/32 1.4062 3“ 6“ 1/2 091492
1.7/16 1.4375 3“ 6“ 1/2 091484
1.15/32 1.4688 3“ 6“ 1/2 091495
1.1/2 1.5000 3“ 6“ 1/2 091485
Ɣ Foret queue dégagée de 12,7 mm
Ɣ1/2” reduced parallel shank drill
Ɣ Silver & Deming, round shank
ƔBrocas de mango cilindrico, Mango
rebajado 1/2”
d2
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
164 www.precisiondormer.com
R57
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch
EDP #
or
e-Code
33/64 0.5156 3“ 6“ 1/2 091533
17/32 0.5312 3“ 6“ 1/2 091534
35/64 0.5469 3“ 6“ 1/2 091535
9/16 0.5625 3“ 6“ 1/2 091536
37/64 0.5781 3“ 6“ 1/2 091537
19/32 0.5938 3“ 6“ 1/2 091538
39/64 0.6094 3“ 6“ 1/2 091539
5/8 0.6250 3“ 6“ 1/2 091540
41/64 0.6406 3“ 6“ 1/2 091541
21/32 0.6562 3“ 6“ 1/2 091542
43/64 0.6719 3“ 6“ 1/2 091543
11/16 0.6875 3“ 6“ 1/2 091544
45/64 0.7031 3“ 6“ 1/2 091545
23/32 0.7188 3“ 6“ 1/2 091546
47/64 0.7344 3“ 6“ 1/2 091547
3/4 0.7500 3“ 6“ 1/2 091548
49/64 0.7656 3“ 6“ 1/2 091549
25/32 0.7812 3“ 6“ 1/2 091550
51/64 0.7969 3“ 6“ 1/2 091551
13/16 0.8125 3“ 6“ 1/2 091552
53/64 0.8281 3“ 6“ 1/2 091553
27/32 0.8438 3“ 6“ 1/2 091554
55/64 0.8594 3“ 6“ 1/2 091555
7/8 0.8750 3“ 6“ 1/2 091556
57/64 0.8906 3“ 6“ 1/2 091557
29/32 0.9062 3“ 6“ 1/2 091558
59/64 0.9219 3“ 6“ 1/2 091559
15/16 0.9375 3“ 6“ 1/2 091560
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch
EDP #
or
e-Code
61/64 0.9531 3“ 6“ 1/2 091561
31/32 0.9688 3“ 6“ 1/2 091562
63/64 0.9844 3“ 6“ 1/2 091563
1“ 1.0000 3“ 6“ 1/2 091564
1.1/64 1.0156 3“ 6“ 1/2 091565
1.1/32 1.0312 3“ 6“ 1/2 091586
1.3/64 1.0469 3“ 6“ 1/2 091567
1.1/16 1.0625 3“ 6“ 1/2 091568
1.5/64 1.0781 3“ 6“ 1/2 091569
1.3/32 1.0938 3“ 6“ 1/2 091570
1.7/64 1.1094 3“ 6“ 1/2 091571
1.1/8 1.1250 3“ 6“ 1/2 091572
1.9/64 1.1406 3“ 6“ 1/2 091573
1.5/32 1.1562 3“ 6“ 1/2 091587
1.11/64 1.1719 3“ 6“ 1/2 091575
1.3/16 1.1875 3“ 6“ 1/2 091576
1.13/64 1.2031 3“ 6“ 1/2 091577
1.7/32 1.2188 3“ 6“ 1/2 091588
1.15/64 1.2344 3“ 6“ 1/2 091579
1.1/4 1.2500 3“ 6“ 1/2 091580
1.9/32 1.2812 3“ 6“ 1/2 091589
1.5/16 1.3125 3“ 6“ 1/2 091582
1.11/32 1.3438 3“ 6“ 1/2 091592
1.3/8 1.3750 3“ 6“ 1/2 091583
1.13/32 1.4062 3“ 6“ 1/2 091595
1.7/16 1.4375 3“ 6“ 1/2 091584
1.15/32 1.4688 3“ 6“ 1/2 091598
1.1/2 1.5000 3“ 6“ 1/2 091585
Ɣ Foret queue dégagée de 12,7 mm
Ɣ1/2” reduced parallel shank drill
Ɣ Silver & Deming, 3-fl ats
ƔBrocas de mango cilindrico, Mango
rebajado 1/2”
d2
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 165
www.precisiondormer.com
R58
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch
EDP #
or
e-Code
1“ 1.0000 3“ 6“ 3/4 091264
1.1/32 1.0313 3“ 6“ 3/4 091266
1.1/16 1.0625 3“ 6“ 3/4 091268
1.3/32 1.0938 3“ 6“ 3/4 091270
1.1/8 1.1250 3“ 6“ 3/4 091272
1.5/32 1.1562 3“ 6“ 3/4 091274
1.3/16 1.1875 3“ 6“ 3/4 091276
1.7/32 1.2188 3“ 6“ 3/4 091278
1.1/4 1.2500 3“ 6“ 3/4 091280
1.9/32 1.2812 3“ 6“ 3/4 091282
1.5/16 1.3125 3“ 6“ 3/4 091284
1.11/32 1.3438 3“ 6“ 3/4 091286
Ŷ
Ɣ
d2
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch
EDP #
or
e-Code
1.3/8 1.3750 3“ 6“ 3/4 091288
1.13/32 1.4062 3“ 6“ 3/4 091290
1.7/16 1.4375 3“ 6“ 3/4 091292
1.15/32 1.4688 3“ 6“ 3/4 091294
1.1/2 1.5000 3“ 6“ 3/4 091296
1.9/16 1.5625 3“ 6“ 3/4 091298
1.5/8 1.6250 3“ 6“ 3/4 091300
1.11/16 1.6875 3“ 6“ 3/4 091302
1.3/4 1.7500 3“ 6“ 3/4 091304
1.13/16 1.8125 3“ 6“ 3/4 091306
1.7/8 1.8750 3“ 6“ 3/4 091308
1.15/16 1.9375 3“ 6“ 3/4 091310
2“ 2.0000 3“ 6“ 3/4 091312
Ɣ Foret queue dégagée de 19,05 mm
Ɣ3/4” reduced parallel shank drill
Ɣ Silver & Deming, round shank
ƔBrocas de mango cilindrico, Mango
rebajado 3/4”
D000 D444
168 169
Ŷ125D
Ŷ298H
Ŷ298H
Ŷ226F
Ɣ200D
D555
170
Ŷ298H
Ŷ298H
Ŷ226F
Ɣ200D
Surface Feet per Minute (SFM)
HSS Special Purpose Drills
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
www.precisiondormer.com
HSS Special Purpose Drills
HSS Special Purpose Drills
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG) With Examples
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Depth of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 279 U
279 = SFM
U = Alpha Code to find your Feed Rate
To calculate Cutting Feed Rate, refer to chart on page 9-10.
Page # for easy reference
Ŷ = Excellent for Application
Style:
Tool Material:
Finish/Coating:
Standard:
Direction of Cut:
Depth of Cut:
Tool Length:
Helix:
Shank:
Point Angle:
Point Style:
Special Standard:
166
1
1
2
2
3
3
4
4
1
1
2
2
3
3
Ɣ = Good for Application
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
76HA 76LO B76HA A217
A218 A221 A236
171 171 171 172 173 173
Ŷ115I Ŷ115I Ŷ115I Ŷ115I Ŷ115I Ŷ115I
Ŷ98I Ŷ98I Ŷ98I Ŷ98I Ŷ98I Ŷ98I
Ŷ82G Ŷ82G Ŷ82G Ŷ82G Ŷ82G Ŷ82G
Ŷ66F Ŷ66F Ŷ66F Ŷ66F Ŷ66F Ŷ66F
Ɣ43E Ɣ43E Ɣ43E Ɣ43E Ɣ43E Ɣ43E
Ɣ30D Ɣ30D Ɣ30D Ɣ30D Ɣ30D Ɣ30D
Ɣ49E Ɣ49E Ɣ49E Ɣ49E Ɣ49E Ɣ49E
Ɣ26G Ɣ26G Ɣ26G Ɣ26G Ɣ26G Ɣ26G
Ɣ33C Ɣ33C Ɣ33C Ɣ33C Ɣ33C Ɣ33C
Ŷ98I Ŷ98I Ŷ98I Ŷ98I Ŷ98I Ŷ98I
Ŷ79F Ŷ79F Ŷ79F Ŷ79F Ŷ79F Ŷ79F
Ɣ66E Ɣ66E Ɣ66E Ɣ66E Ɣ66E Ɣ66E
Ɣ46E Ɣ46E Ɣ46E Ɣ46E Ɣ46E Ɣ46E
Ɣ79F Ɣ79F Ɣ79F Ɣ79F Ɣ79F Ɣ79F
Ɣ43D Ɣ43D Ɣ43D Ɣ43D Ɣ43D Ɣ43D
Ɣ23B Ɣ23B Ɣ23B Ɣ23B Ɣ23B Ɣ23B
Ɣ33G Ɣ33G Ɣ33G Ɣ33G Ɣ33G Ɣ33G
Ɣ16E Ɣ16E Ɣ16E Ɣ16E Ɣ16E Ɣ16E
Ɣ13A Ɣ13A Ɣ13A Ɣ13A Ɣ13A Ɣ13A
Ɣ115G Ɣ115G Ɣ115G Ɣ115G Ɣ115G Ɣ115G
Ɣ108I Ɣ108I Ɣ108I Ɣ108I Ɣ108I Ɣ108I
Ɣ89H Ɣ89H Ɣ89H Ɣ89H Ɣ89H Ɣ89H
Ɣ52G Ɣ52G Ɣ52G Ɣ52G Ɣ52G Ɣ52G
Ɣ108J Ɣ108J Ɣ108J Ɣ108J Ɣ108J Ɣ108J
Ɣ98I Ɣ98I Ɣ98I Ɣ98I Ɣ98I Ɣ98I
Ɣ89H Ɣ89H Ɣ89H Ɣ89H Ɣ89H Ɣ89H
Ɣ72H Ɣ72H Ɣ72H Ɣ72H Ɣ72H Ɣ72H
Ɣ98J Ɣ98J Ɣ98J Ɣ98J Ɣ98J Ɣ98J
Ɣ92H Ɣ92H Ɣ92H Ɣ92H Ɣ92H Ɣ92H
Ɣ46F Ɣ46F Ɣ46F Ɣ46F Ɣ46F Ɣ46F
Ɣ10B Ɣ10B Ɣ10B Ɣ10B Ɣ10B Ɣ10B
Spotting
Drills
SP Series
174
Ŷ115E
Ŷ98E
Ŷ89C
Ɣ69C
Ɣ46C
Ɣ33B
Ɣ52C
Ɣ30D
Ɣ33B
Ɣ105E
Ɣ89C
Ɣ66C
Ɣ52B
Ɣ89C
Ɣ39B
Ɣ23A
Ɣ43D
Ɣ26C
Ɣ13A
Ŷ89D
Ŷ108E
Ŷ89D
Ŷ52D
Ŷ108E
Ŷ98E
Ɣ98D
Ɣ82D
Ɣ98F
Ɣ115E
Ɣ56D
Ɣ39A
ATR41
175
Ɣ82F
Ɣ66F
Ŷ43E
Ŷ30D
Ɣ49E
Ŷ26G
Ŷ30C
Ɣ98I
Ɣ79F
Ɣ66E
Ŷ46E
Ŷ75F
Ŷ39D
Ŷ20B
Ŷ33G
Ɣ20E
Ɣ10A
Ɣ89H
Ŷ52G
Ŷ79F
Ɣ10B
60B
176
TS10
TS15
TS18
177
Ŷ115J
Ŷ98J
Ŷ89G
Ŷ69G
Ɣ46F
Ɣ33E
Ŷ52F
Ɣ30H
Ɣ33D
Ŷ105J
Ŷ89G
Ŷ66F
Ɣ52F
Ŷ89G
Ŷ52E
Ŷ26C
Ɣ43H
Ɣ26F
Ɣ13B
Ɣ118H
Ɣ125J
Ɣ89I
Ɣ52H
Ɣ108K
Ɣ98J
Ɣ98I
Ɣ82I
Ɣ98K
Ɣ115I
Ɣ56G
Ɣ13C
SM8
176
Ŷ115J
Ŷ98J
Ŷ89G
Ŷ69G
Ɣ46F
Ɣ33E
Ŷ52F
Ɣ30H
Ɣ33D
Ŷ105J
Ŷ89G
Ŷ66F
Ɣ52F
Ŷ89G
Ŷ52E
Ŷ26C
Ɣ43H
Ɣ26F
Ɣ13B
Ɣ118H
Ɣ125J
Ɣ89I
Ɣ52H
Ɣ108K
Ɣ98J
Ɣ98I
Ɣ82I
Ɣ98K
Ɣ115I
Ɣ56G
Ɣ13C
TS40
TS41
TS51
TS52
TS55
177 177
Ŷ115J Ŷ115J
Ŷ98J Ŷ98J
Ŷ89G Ŷ89G
Ŷ69G Ŷ69G
Ɣ46F Ɣ46F
Ɣ33E Ɣ33E
Ŷ52F Ŷ52F
Ɣ30H Ɣ30H
Ɣ33D Ɣ33D
Ŷ105J Ŷ105J
Ŷ89G Ŷ89G
Ŷ66F Ŷ66F
Ɣ52F Ɣ52F
Ŷ89G Ŷ89G
Ŷ52E Ŷ52E
Ŷ26C Ŷ26C
Ɣ43H Ɣ43H
Ɣ26F Ɣ26F
Ɣ13B Ɣ13B
Ɣ118H Ɣ118H
Ɣ125J Ɣ125J
Ɣ89I Ɣ89I
Ɣ52H Ɣ52H
Ɣ108K Ɣ108K
Ɣ98J Ɣ98J
Ɣ98I Ɣ98I
Ɣ82I Ɣ82I
Ɣ98K Ɣ98K
Ɣ115I Ɣ115I
Ɣ56G Ɣ56G
Ɣ13C Ɣ13C
Surface Feet per Minute (SFM)
HSS Special Purpose Drills
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
www.precisiondormer.com
HSS Special Purpose Drills(con‘t)
HSS Special Purpose Drills
167
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
168 www.precisiondormer.com
D000
Ŷ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
11/64 0.1719 1.1/2 3.1/2 030011
3/16 0.1875 1.1/2 3.1/2 030012
13/64 0.2031 1.3/4 3.3/4 030013
7/32 0.2188 1.3/4 3.3/4 030014
15/64 0.2344 2“ 4“ 030015
1/4 0.2500 2“ 4“ 030016
17/64 0.2656 2.1/4 4.1/4 030017
9/32 0.2812 2.1/4 4.1/4 030018
19/64 0.2969 2.1/2 4.1/2 030019
5/16 0.3125 2.1/2 4.1/2 030020
21/64 0.3281 2.3/4 4.3/4 030021
11/32 0.3438 2.3/4 4.3/4 030022
23/64 0.3594 3“ 5“ 030023
3/8 0.3750 3“ 5“ 030024
25/64 0.3906 3“ 5.1/4 030025
13/32 0.4062 3“ 5.1/4 030026
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
27/64 0.4219 3“ 5.1/2 030027
7/16 0.4375 3“ 5.1/2 030028
29/64 0.4531 3.1/4 5.3/4 030029
15/32 0.4688 3.1/4 5.3/4 030030
31/64 0.4844 3.1/2 6“ 030031
1/2 0.5000 3.1/2 6“ 030032
17/32 0.5312 3.1/2 6“ 030034
9/16 0.5625 3.1/2 6“ 030036
19/32 0.5938 4“ 7“ 030038
5/8 0.6250 4“ 7“ 030040
21/32 0.6562 4.1/2 7.1/2 030042
11/16 0.6875 4.1/2 7.1/2 030044
23/32 0.7188 4.3/4 8“ 030046
3/4 0.7500 4.3/4 8“ 030048
Ɣ Foret de matriceƔDie drill Ɣ Taladro del dado
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
ƔCarbide-tipped
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 169
www.precisiondormer.com
Ɣ Foret court
D444
D444
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
32 0.1160 1.5/8 2.3/4 034632
1/8 0.1250 1.5/8 2.3/4 034408
30 0.1285 1.5/8 2.3/4 034630
29 0.1360 1.3/4 2.7/8 034629
9/64 0.1406 1.3/4 2.7/8 034409
25 0.1495 1.7/8 3“ 034625
5/32 0.1562 2“ 3.1/8 034410
21 0.1590 2.1/8 3.1/4 034621
20 0.1610 2.1/8 3.1/4 034620
19 0.1660 2.1/8 3.1/4 034619
18 0.1695 2.1/8 3.1/4 034618
11/64 0.1719 2.1/8 3.1/4 034411
17 0.1730 2.3/16 3.3/8 034617
15 0.1800 2.3/16 3.3/8 034615
14 0.1820 2.3/16 3.3/8 034614
13 0.1850 2.5/16 3.1/2 034613
3/16 0.1875 2.5/16 3.1/2 034412
11 0.1910 2.5/16 3.1/2 034611
10 0.1935 2.7/16 3.5/8 034610
90.1960 2.7/16 3.5/8 034609
70.2010 2.7/16 3.5/8 034607
13/64 0.2031 2.7/16 3.5/8 034413
30.2130 2.1/2 3.3/4 034603
7/32 0.2188 2.1/2 3.3/4 034414
10.2280 2.5/8 3.7/8 034601
15/64 0.2344 2.5/8 3.7/8 034415
B0.2380 2.3/4 4“ 034502
C0.2420 2.3/4 4“ 034503
E0.2500 2.3/4 4“ 034505
1/4 0.2500 2.3/4 4“ 034416
F0.2570 2.7/8 4.1/8 034506
G0.2610 2.7/8 4.1/8 034507
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
17/64 0.2656 2.7/8 4.1/8 034417
H0.2660 2.7/8 4.1/8 034508
I0.2720 2.7/8 4.1/8 034509
J0.2770 2.7/8 4.1/8 034510
K0.2810 2.15/16 4.1/4 034511
9/32 0.2812 2.15/16 4.1/4 034418
L0.2900 2.15/16 4.1/4 034512
19/64 0.2969 3.1/16 4.3/8 034419
N0.3020 3.1/16 4.3/8 034514
5/16 0.3125 3.3/16 4.1/2 034420
O0.3160 3.3/16 4.1/2 034515
P0.3230 3.5/16 4.5/8 034516
21/64 0.3281 3.5/16 4.5/8 034421
Q0.3320 3.7/16 4.3/4 034517
R0.3390 3.7/16 4.3/4 034518
11/32 0.3438 3.7/16 4.3/4 034422
S0.3480 3.1/2 4.7/8 034519
T0.3580 3.1/2 4.7/8 034520
23/64 0.3594 3.1/2 4.7/8 034423
U0.3680 3.5/8 5“ 034521
3/8 0.3750 3.5/8 5“ 034424
25/64 0.3906 3.3/4 5.1/8 034425
13/32 0.4062 3.7/8 5.1/4 034426
Z0.4130 3.7/8 5.1/4 034526
27/64 0.4219 3.15/16 5.3/8 034427
7/16 0.4375 4.1/16 5.1/2 034428
29/64 0.4531 4.3/16 5.5/8 034429
15/32 0.4688 4.5/16 5.3/4 034430
31/64 0.4844 4.3/8 5.7/8 034431
1/2 0.5000 4.1/2 6“ 034432
ƔJobber drill ƔBroca , serie corta
ƔCarbide-tipped
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
170 www.precisiondormer.com
Ɣ Foret queue
D555
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/8 0.1250 2.3/4 5.1/8 035508
9/64 0.1406 3“ 5.3/8 035509
5/32 0.1562 3“ 5.3/8 035510
11/64 0.1719 3.3/8 5.3/4 035511
3/16 0.1875 3.3/8 5.3/4 035512
13/64 0.2031 3.5/8 6“ 035513
7/32 0.2188 3.5/8 6“ 035514
15/64 0.2344 3.3/4 6.1/8 035515
1/4 0.2500 3.3/4 6.1/8 035516
17/64 0.2656 3.7/8 6.1/4 035517
9/32 0.2812 3.7/8 6.1/4 035518
19/64 0.2969 4“ 6.3/8 035519
5/16 0.3125 4“ 6.3/8 035520
21/64 0.3281 4.1/8 6.1/2 035521
11/32 0.3438 4.1/8 6.1/2 035522
23/64 0.3594 4.1/4 6.3/4 035523
3/8 0.3750 4.1/4 6.3/4 035524
25/64 0.3906 4.3/8 7“ 035525
13/32 0.4062 4.3/8 7“ 035526
27/64 0.4219 4.5/8 7.1/4 035527
7/16 0.4375 4.5/8 7.1/4 035528
29/64 0.4531 4.3/4 7.1/2 035529
Ɣ Taper length ƔBroca de mango cónico
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
15/32 0.4688 4.3/4 7.1/2 035530
31/64 0.4844 4.3/4 7.3/4 035531
1/2 0.5000 4.3/4 7.3/4 035532
33/64 0.5156 4.3/4 8“ 035533
17/32 0.5312 4.3/4 8“ 035534
35/64 0.5469 4.7/8 8.1/4 035535
9/16 0.5625 4.7/8 8.1/4 035536
37/64 0.5781 4.7/8 8.3/4 035537
19/32 0.5938 4.7/8 8.3/4 035538
39/64 0.6094 4.7/8 8.3/4 035539
5/8 0.6250 4.7/8 8.3/4 035540
41/64 0.6406 5.1/8 9“ 035541
21/32 0.6562 5.1/8 9“ 035542
43/64 0.6719 5.3/8 9.1/4 035543
11/16 0.6875 5.3/8 9.1/4 035544
45/64 0.7031 5.5/8 9.1/2 035545
23/32 0.7188 5.5/8 9.1/2 035546
47/64 0.7344 5.7/8 9.3/4 035547
3/4 0.7500 5.7/8 9.3/4 035548
13/16 0.8125 6.1/8 10“ 035552
7/8 0.8750 6.1/8 10“ 035556
15/16 0.9375 6.1/8 10.3/4 035560
1“ 1.0000 6.3/8 11“ 035564
ƔCarbide-tipped
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 171
www.precisiondormer.com
76LO
B76HA
Nr. d1
Inch l2
Inch l1
Inch
d2
Ø
Inch
d3
Ø
Inch
EDP #
or
e-Code
11 3/64 3/64 1.1/4 1/8 0.100 097611
12 1/16 1/16 1.7/8 3/16 0.150 097612
13 3/32 3/32 2“ 1/4 0.200 097613
14 7/64 7/64 2.1/8 5/16 0.250 097614
Nr. d1
Inch l2
Inch l1
Inch
d2
Ø
Inch
d3
Ø
Inch
EDP #
or
e-Code
15 5/32 5/32 2.3/4 7/16 0.350 097615
16 3/16 3/16 3“ 1/2 0.400 097616
17 7/32 7/32 3.1/4 5/8 0.500 097617
18 1/4 1/4 3.1/2 3/4 0.600 097618
Ɣ Bell type
Ɣ 60°/120° included countersink angle
Ɣ Extra length
Ɣ Foret à centrer
Ŷ
Ɣ
Nr.
d1
Ø
Inch l2
Inch l1
Inch
d2
Ø
Inch
EDP #
or
e-Code
000 0.020 0.030 1.1/4 1/8 097630
00 0.025 0.030 1.1/8 1/8 097620
01/32 0.038 1.1/8 1/8 097610
13/64 3/64 1.1/4 1/8 097601
25/64 5/64 1.7/8 3/16 097602
37/64 7/64 2“ 1/4 097603
Nr.
d1
Ø
Inch l2
Inch l1
Inch
d2
Ø
Inch
EDP #
or
e-Code
13/64 3/64 3“ 1/8 097713
13/64 3/64 4“ 1/8 097714
25/64 5/64 4“ 3/16 097724
25/64 5/64 5“ 3/16 097725
37/64 7/64 4“ 1/4 097734
37/64 7/64 5“ 1/4 097735
41/8 1/8 4“ 5/16 097744
41/8 1/8 5“ 5/16 097745
Nr.
d1
Ø
Inch l2
Inch l1
Inch
d2
Ø
Inch
EDP #
or
e-Code
41/8 1/8 6“ 5/16 097746
53/16 3/16 5“ 7/16 097755
53/16 3/16 6“ 7/16 097756
67/32 7/32 5“ 1/2 097765
67/32 7/32 6“ 1/2 097766
71/4 1/4 6“ 5/8 097776
85/16 5/16 6“ 3/4 097786
Ɣ Center drill ƔBrocas de Centrar
76HA - 76LO - B76HA
Ɣ Regular length
Ɣ Foret à centrerƔ Center drill ƔBrocas de Centrar
Ɣ Foret à centrerƔ Center drill ƔBrocas de Centrar
41/8 1/8 2.1/8 5/16 097604
Nr.
d1
Ø
Inch l2
Inch l1
Inch
d2
Ø
Inch
EDP #
or
e-Code
41/8 1/8 2.1/8 5/16 097604
53/16 3/16 2.3/4 7/16 097605
67/32 7/32 3“ 1/2 097606
71/4 1/4 3.1/4 5/8 097607
85/16 5/16 3.1/2 3/4 097608
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
172 www.precisiondormer.com
Ɣ Foret à centrer
A217
Ŷ
Ɣ
Nr.
d1
dec.
Inch l2
Inch l1
ch
d2
Ø
Inch
max
T
mm Stock #
EDP #
or
e-Code
10.0469 3/8 1.1/4 3/64 2.33 0239216 A217N1
20.0781 33/64 1.7/8 5/64 3.58 0239223 A217N2
30.1094 5/8 2“ 7/64 4.83 0239230 A217N3
40.1250 45/64 2.1/8 1/8 5.92 0239247 A217N4
Nr.
d1
dec.
Inch l2
Inch l1
ch
d2
Ø
Inch
max
T
mm Stock #
EDP #
or
e-Code
50.1875 1“ 2.3/4 3/16 8.41 0239254 A217N5
60.2188 1“ 3“ 7/32 9.67 0239261 A217N6
70.2500 1.13/16 3.1/4 1/4 11.83 0239278 A217N7
80.3125 1.11/32 3.1/2 5/16 14.33 0239285 A217N8
Nr.
d1
dec.
Inch l2
Inch l1
Inch
d2
Ø
Inch
max
T
mm Stock #
EDP #
or
e-Code
10.0469 3/8 1.1/4 3/64 2.18 0239292 A218N1
20.0781 33/64 1.7/8 5/64 3.37 0239308 A218N2
30.1094 5/8 2“ 7/64 4.57 0239315 A218N3
40.1250 45/64 2.1/8 1/8 5.56 0239322 A218N4
Nr.
d1
dec.
Inch l2
Inch l1
Inch
d2
Ø
Inch
max
T
mm Stock #
EDP #
or
e-Code
50.1875 1“ 2.3/4 3/16 7.94 0239339 A218N5
60.2188 1“ 3“ 7/32 9.13 0239346 A218N6
70.2500 1.13/64 3.1/4 1/4 11.11 0239353 A218N7
80.3125 1.11/32 3.1/2 516 13.50 0239360 A218N8
A217 - A218
ƔCenter Drill ƔBrocas de Centrar
Ŷ
Ɣ
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
A218
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 173
www.precisiondormer.com
A221
Nr.
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
d2
Ø
Inch
max
T
mm Stock #
EDP #
or
e-Code
00 0.025 0.0250 0.030 1.1/8 1/8 2.83 0241851 A221N00 1)
01/32 0.0312 0.038 1.1/8 1/8 2.83 0241844 A221N0 1)
13/64 0.0469 3/64 1.1/4 1/8 2.71 0241868 A221N1
25/64 0.0781 5/64 1.7/8 3/16 4.19 0241875 A221N2
37/64 0.1094 7/64 2“ 1/4 5.47 0241882 A221N3
41/8 0.1250 1/8 2.1/8 5/16 6.90 0241899 A221N4
Nr.
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
d2
Ø
Inch
max
T
mm Stock #
EDP #
or
e-Code
53/16 0.1875 3/16 2.3/4 7/16 9.86 0241905 A221N5
67/32 0.2188 7/32 3“ 1/2 11.35 0241912 A221N6
71/4 0.2500 1/4 3.1/4 5/8 14.20 0241929 A221N7
85/16 0.3125 5/16 3.1/2 3/4 17.16 0241936 A221N8
Ŷ
Ɣ
A236
Nr.
d2
Ø
Inch
d1
Ø
Inch l2
Inch l1
Inch
max
T
mm Stock #
EDP #
or
e-Code
00 1/8 0.025 0.030 1.1/8 2.83 0387931 A236N00
01/8 1/32 0.038 1.1/8 2.83 0387948 A236N0
11/8 3/64 3/64 1.1/4 2.71 0387955 A236N1
23/16 5/64 5/64 1.7/8 4.19 0387962 A236N2
31/4 7/64 7/64 2“ 5.47 0387979 A236N3
45/16 1/8 1/8 2.1/8 6.90 0387986 A236N4
Nr.
d2
Ø
Inch
d1
Ø
Inch l2
Inch l1
Inch
max
T
mm Stock #
EDP #
or
e-Code
57/16 3/16 3/16 2.3/4 9.86 0387993 A236N5
61/2 7/32 7/32 3“ 11.35 0388006 A236N6
75/8 1/4 1/4 3.1/4 14.20 0388013 A236N7
83/4 5/16 5/16 3.1/2 17.16 0388020 A236N8
97/8 11/32 11/32 3.9/16 20.01 0388037 A236N9
Ŷ
Ɣ
A221 - A236
Ɣ Foret à centrerƔCenter Drill ƔBrocas de Centrar
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
1) = Single End
A236
Ɣ Foret à centrerƔCenter Drill ƔBrocas de Centrar
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
174 www.precisiondormer.com
Spotting Drills
Ɣ Forets de dessoudageƔSpotting Drill ƔBroca para centrados
Ŷ
Ɣ
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/4 0.2500 3/4 2.1/2 087950
3/8 0.3750 1.1/8 3.1/8 087951
1/2 0.5000 1.3/8 3.3/4 087952
5/8 0.6250 1.5/8 4.3/8 087953
3/4 0.7500 1.7/8 5“ 087954
1“ 1.0000 2.1/4 6“ 087955
SPS-120° Short Length SPSG-120° Short Length
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/4 0.2500 3/4 2.1/2 087956
3/8 0.3750 1.1/8 3.1/8 087957
1/2 0.5000 1.3/8 3.3/4 087958
5/8 0.6250 1.5/8 4.3/8 087959
3/4 0.7500 1.7/8 5“ 087960
1“ 1.0000 2.1/4 6“ 087961
SPR-120° Regular Length SPRG-120° Regular Length
1/4 0.2500 3/4 4“ 087962
3/8 0.3750 1.1/8 5“ 087963
1/2 0.5000 1.3/8 6“ 087964
5/8 0.6250 1.5/8 7“ 087965
3/4 0.7500 1.7/8 8“ 087966
1“ 1.0000 2.1/4 8“ 087967
1/4 0.2500 3/4 4“ 087968
3/8 0.3750 1.1/8 5“ 087969
1/2 0.5000 1.3/8 6“ 087970
5/8 0.6250 1.5/8 7“ 087971
3/4 0.7500 1.7/8 8“ 087972
1“ 1.0000 2.1/4 8“ 087973
SPL-120° Long Length
1/4 0.2500 3/4 6“ 087974
3/8 0.3750 1.1/8 7“ 087975
1/2 0.5000 1.3/8 8“ 087976
5/8 0.6250 1.5/8 9“ 087977
3/4 0.7500 1.7/8 10“ 087978
1“ 1.0000 2.1/4 10“ 087979
SPLG-120° Long Length
1/4 0.2500 3/4 6“ 087980
3/8 0.3750 1.1/8 7“ 087981
1/2 0.5000 1.3/8 8“ 087982
5/8 0.6250 1.5/8 9“ 087983
3/4 0.7500 1.7/8 10“ 087984
1“ 1.0000 2.1/4 10“ 087985
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
175
Ɣ Foret aéronautique à queue cylindrique rallongée
SPSG-90° Short Length
1/4 0.2500 3/4 2.1/2 087906
3/8 0.3750 1.1/8 3.1/8 087907
1/2 0.5000 1.3/8 3.3/4 087908
5/8 0.6250 1.5/8 4.3/8 087909
3/4 0.7500 1.7/8 5“ 087910
1“ 1.0000 2.1/4 6“ 087911
SPS-90° Short Length
1/4 0.2500 3/4 2.1/2 087900
3/8 0.3750 1.1/8 3.1/8 087901
1/2 0.5000 1.3/8 3.3/4 087902
5/8 0.6250 1.5/8 4.3/8 087903
3/4 0.7500 1.7/8 5“ 087904
1“ 1.0000 2.1/4 6“ 087905
Spotting Drills
SPL-90° Long Length
1/4 0.2500 3/4 6“ 087924
3/8 0.3750 1.1/8 7“ 087925
1/2 0.5000 1.3/8 8“ 087926
5/8 0.6250 1.5/8 9“ 087927
3/4 0.7500 1.7/8 10“ 087928
1“ 1.0000 2.1/4 10“ 087929
SPLG-90° Long Length
1/4 0.2500 3/4 6“ 087930
3/8 0.3750 1.1/8 7“ 087931
1/2 0.5000 1.3/8 8“ 087932
5/8 0.6250 1.5/8 9“ 087933
3/4 0.7500 1.7/8 10“ 087934
1“ 1.0000 2.1/4 10“ 087935
SPR-90° Regular Length
1/4 0.2500 3/4 4“ 087912
3/8 0.3750 1.1/8 5“ 087913
1/2 0.5000 1.3/8 6“ 087914
5/8 0.6250 1.5/8 7“ 087915
3/4 0.7500 1.7/8 8“ 087916
1“ 1.0000 2.1/4 8“ 087917
SPRG-90° Regular Length
1/4 0.2500 3/4 4“ 087918
3/8 0.3750 1.1/8 5“ 087919
1/2 0.5000 1.3/8 6“ 087920
5/8 0.6250 1.5/8 7“ 087921
3/4 0.7500 1.7/8 8“ 087922
1“ 1.0000 2.1/4 8“ 087923
ATR41
d1
Ø
No.
d1
Ø
Inch
d2
Ø
Inch l2
Inch l1
Inch
d3
Ø
Inch # of
Flutes
EDP #
or
e-Code
10.0810 0.0980 13/16 2“ 0.0980 3 041701
20.1100 0.1280 7/8 2.1/4 0.1280 3 041702
d1
Ø
No.
d1
Ø
Inch
d2
Ø
Inch l2
Inch l1
Inch
d3
Ø
Inch # of
Flutes
EDP #
or
e-Code
30.1650 0.1875 1.1/16 2.1/2 0.1875 3 041703
40.2240 0.2500 1.1/4 2.3/4 0.2500 4 041704
Ɣ Aircraft extension drill
Ɣ Right-hand helix (taper 1/4” per foot)
Ɣ Notched point
ƔBroca extralarga para la industria
Aeronáutica
Ɣ Forets de dessoudageƔSpotting drill ƔBroca para centrados
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
d3
d2
www.precisiondormer.com
176
60B - SM8
Ɣ Ebauche pour foret
d1
Ø
Inch
d1
dec.
Inch l1
Inch
EDP #
or
e-Code
1/32 0.0312 1.3/8 019002
3/64 0.0469 1.3/4 019003
1/16 0.0625 1.7/8 019004
5/64 0.0781 2“ 019005
3/32 0.0937 2.1/4 019006
7/64 0.1094 2.5/8 019007
1/8 0.125 2.3/4 019008
9/64 0.1406 2.7/8 019009
5/32 0.1562 3.1/8 019010
11/64 0.1719 3.1/4 019011
3/16 0.1875 3.1/2 019012
13/64 0.2031 3.5/8 019013
7/32 0.2187 3.3/4 019014
15/64 0.2344 3.7/8 019015
1/4 0.25 4“ 019016
17/64 0.2656 4.1/8 019017
9/32 0.2812 4.1/4 019018
19/64 0.2969 4.3/8 019019
5/16 0.3125 4.1/2 019020
21/64 0.3281 4.5/8 019021
11/32 0.3437 4.3/4 019022
23/64 0.3594 4.7/8 019023
d1
Ø
Inch
d1
dec.
Inch l1
Inch
EDP #
or
e-Code
3/8 0.375 5“ 019024
25/64 0.3906 5.1/8 019025
13/32 0.4062 5.1/4 019026
27/64 0.4219 5.3/8 019027
7/16 0.4375 5.1/2 019028
29/64 0.4531 5.5/8 019029
15/32 0.4687 5.3/4 019030
31/64 0.4844 5.7/8 019031
1/2 0.5 6“ 019032
17/32 0.5312 6“ 019034
9/16 0.5625 6“ 019036
19/32 0.5938 6“ 019038
5/8 0.625 6“ 019040
21/32 0.6562 6“ 019042
11/16 0.6875 6“ 019044
23/32 0.7188 6“ 019046
3/4 0.75 6“ 019048
13/16 0.8125 6“ 019052
7/8 0.875 6“ 019056
15/16 0.9375 6“ 019060
1“ 16“019064
ƔDrill blank ƔBroca sin mecanizar
www.precisiondormer.com
SM8
Ɣ Foret extra-court - Double
d1
Ø
d1
Ø
mm
d1
dec.
Inch l2
Inch
l1
Ø
Inch
EDP #
or
e-Code
7/64 2.778 0.1094 1/2 1.7/8 098907
1/8 3.175 0.1250 1/2 2“ 098908
30 3.264 0.1285 1/2 2“ 098930
9/64 3.572 0.1406 1/2 2“ 098909
d1
Ø
d1
Ø
mm
d1
dec.
Inch l2
Inch
l1
Ø
Inch
EDP #
or
e-Code
5/32 3.969 0.1562 1/2 2.1/16 098910
3/16 4.762 0.1875 1/2 2.3/16 098912
11 4.851 0.1910 1/2 2.1/4 098911
1/4 6.350 0.2500 1/2 2.1/2 098916
ƔStub drill ƔBroca extra corta - Doble punta
ƔDouble end
177
Ɣ Threaded hex shank drills
Ɣ Tyoe B
d1
Ø
Inch
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
F0.257 9/16 1.1/2 045606
TS10
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/8 0.125 9/16 1.1/4 045708
5/32 0.1562 9/16 1.1/2 045710
3/16 0.1875 9/16 1.1/2 045712
7/32 0.2188 9/16 1.1/2 045714
1/4 0.25 9/16 1.1/4 045716
Short
Threaded Hex Shank Drills
d1
Ø
Inch
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
40 0.098 9/16 1“ 045640
30 0.1285 9/16 1.1/4 045630
21 0.159 9/16 1.1/4 045621
20 0.161 9/16 1.1/4 045620
11 0.191 9/16 1.1/2 045611
10 0.1935 9/16 1.1/4 045610
TS18 Short
TS15 Short
TS52
40 0.0980 7/8 2.1/8 017940
30 0.1285 1.1/8 2.1/8 017930
21 0.1590 1.1/8 2.1/8 017921
20 0.1610 1.1/8 2.1/8 017920
11 0.1910 1.1/8 2.1/8 017911
10 0.1935 1.1/8 2.1/8 017910
Long
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
TS55
F0.257 1.1/8 2.1/8 017990
Long
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
TS51
d1
Ø
Inch
d1
dec.
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/8 0.125 7/8 2.1/8 017958
5/32 0.1562 1.1/8 2.1/8 017960
3/16 0.1875 1.1/8 2.1/8 017962
7/32 0.2188 1.1/8 2.1/8 017964
1/4 0.25 1.1/8 2.1/8 017966
Long
www.precisiondormer.com
TS41
d1
Ø
Inch
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
40 0.098 5/16 1/2 045840
30 0.1285 5/16 9/16 045830
20 0.161 5/16 9/16 045820
11 0.191 5/16 9/16 045811
10 0.1935 5/16 9/16 045810
TS40
d1
Ø
Inch
d1
dec.
Inch
l2
Inch
l1
Inch
EDP #
or
e-Code
1/8 0.125 5/16 1/2 045808
Stub
Stub
178
Ɣ Coffret de forets courts
Drill Sets
Style Tool Type # in
Set Sizes EDP #
C13R10P R10P 13 1/16-1/4 x 64ths 090164
C15R10P R10P 15 1/16-1/2 x 32nds 090163
C21R10P R10P 21 1/16-3/8 x 64ths 090165
C29R10P R10P 29 1/16-1/2 x 64ths 090162
C20R18P R18P 20 61-80 090161
C60R18P R18P 60 1-60 090101
C26R15P R15P 26 A-Z 090126
C15L10 L10 15 1/16-1/2 x 32nds, LEFT HAND 099955
C29L10 L10 29 1/16-1/2 x 64ths, LEFT HAND 099935
C115COMBP R10P, R18P, R15P 115 1/16-1/2 x 64ths, 1-60, A-Z 090123
C114COMBP R10P, R18P, R10PM 114 1/16-1/2 x 64ths, 1-60, 1-13mm x .5 mm 090114
C25R10PM R10PM 25 1mm-13mm x .5mm 099994
C50R10PM R10PM 50 1mm-5.9mm x .1mm 099997
ƔJuego de Brocas, serie corta
Style Tool Type # in
Set Sizes EDP #
C13R10 R10 13 1/16-1/4 x 64ths 099979
C15R10 R10 15 1/16-1/2 x 32nds 099978
C21R10 R10 21 1/16-3/8 x 64ths 099980
C29R10 R10 29 1/16-1/2 x 64ths 099977
C20R18 R18 20 61-80 099981
C60R18 R18 60 1-60 099976
C26R15 R15 26 A-Z 099983
C115COMB R10, R18, R15 115 1/16-1/2 x 64ths, 1-60, A-Z 099982
C114COMB R10, R18, 2AB 114 1/16-1/2 x 64ths,1-60, 1-13mm x .5 mm 099990
Style Tool Type # in Set Sizes EDP #
C13R10CO R10CO 13 1/16-1/2 x 64ths 099944
C15R10CO R10CO 15 1/16-1/2 x 32nds 090291
C21R10CO R10CO 21 1/16-3/8 x 64ths 099701
C29R10CO R10CO 29 1/16-1/2 x 64ths 090290
C60R18CO R18CO 60 1-60 090600
C26R15CO R15CO 26 A-Z 090292
C115COMBC R10CO, R18CO, R15CO 115 1/16-1/2 x 64ths, 1-60, A-Z 099706
C114COMBC R10CO, R18CO, 2ACO 114 1/16-1/2 x 64ths, 1-60, 1-13mm x .5 mm 099705
Jobber Drill Sets
Ɣ Drill Sets
www.precisiondormer.com
179
Style Tool Type # in Set Sizes EDP #
C29HX10 HX10 29 1/16-1/2 x 64ths 091010
A190
Style Tool Type # in Set Sizes Stock # EDP #
3A100 21 1/16 - 3/8 x 1/64 0179413 A1903
200 A100 24 1.0 mm - 10.5 mm x 0.5 mm + 3.3 - 4.2 - 6.8 - 10.2 mm 0030530 A190200
201 A100 19 1.0 mm - 10.0 mm x 0.5 mm 0030547 A190201
202 A100 51 1.0 mm - 6.0 mm x 0.1 mm 0030554 A190202
203 A100 41 6.0 mm - 10.0 mm x 0.1 mm 0030561 A190203
204 A100 25 1.0 mm - 13.0 mm x 0.5 mm 0030578 A190204
Drill Sets
A097
Style Tool Type # in Set Sizes Stock # EDP #
18 A012 29 1/16 - 1/2 x 1/64 0574317 A09718
20 A012 15 1/16 - 1/2 x 1/32 0574348 A09720
60 A012 13 1/16 - 1/4 x 1/64 0574355 A09760
12 A012 60 Nr.1 - Nr.60 0574324 A09712
14 A012 26 A - Z 0574331 A09714
30 A012 115 1/16 - 1/2 x 1/64, Nr.1 - Nr.60, A-Z 0574362 A09730
Ɣ Coffret de forets courts ƔJuego de Brocas, serie corta
Jobber Drill Sets
Ɣ Drill Sets
A191
Style Tool Type # in Set Sizes Stock # EDP #
31M A100 20 0.3 mm - 1.0 mm x 0.05 mm + 0.38 - 0.52 - 0.58 - 0.78 - 0.82 mm 0149133 A19131M
61/80 A100 20 Nr.61 - Nr.80 0179499 A19161-80
413 A100 13 1.5 mm - 6.5 mm x 0.5 mm + 3.3 - 4.2 mm 0030608 A191413
419 A100 19 1.0 mm - 10.0 mm x 0.5 mm 0030615 A191419
www.precisiondormer.com
Drill Sets
Ɣ Coffret de forets courts ƔJuego de Brocas, serie cortaƔ Drill Sets
180
Style Tool Type # in Set Sizes EDP #
C29R40 R40 29 1/16-1/2 x 64ths 090170
C60R41 R41 60 1-60 090174
C26R42 R42 26 A-Z 090173
Stub Drill Sets
Style Tool Type # in Set Sizes EDP #
C29R40C R40C 29 1/16-1/2 x 64ths 099903
C60R41C R41C 60 1-60 099930
Style Tool Type # in Set Sizes EDP #
C29M40CO M40CO 29 1/16-1/2 x 64ths 099962
C60M41CO M41CO 60 1-60 099960
C26M42CO M42CO 26 A-Z 099961
www.precisiondormer.com
181
Style Tool Type # in Set Sizes EDP #
C8R56CO R56CO 8 1/2“ Reduced Shank, 9/16-1“
x16ths, Silver & Deming 090328
Style Tool Type # in
Set Sizes EDP #
C16A209 209 16 33/64-3/4 x 64ths 090131
C16B209 209 16 49/64-1“ x 64ths 090133
Taper Shank Drill Sets
Reduced Shank Drill Sets
Style Tool Type # in Set Sizes EDP #
C8R56 R56 8 1/2“ Reduced Shank, 9/16-1“ x 16ths, S&D 090556
C8R57 R57 8 1/2“ Reduced Shank, 9/16-1“ x 16ths, S&D 090558
C33R56 R56 33 1/2“ Reduced Shank, 1/2-1“x 64ths, S&D 090231
Ɣ Coffret de forets courtsƔ Drill Sets ƔJuego de Brocas, serie corta
Drill Sets
Taper Length Drill Sets
Style Tool Type # in Set Sizes EDP #
C29R51 R51 29 1/16-1/2 x 64ths 090154
C60R52 R52 60 1-60 090155
www.precisiondormer.com
182
Tap Table of Contents
Style Standard Thread
Designation Description Finish Page
No.
Straight Flute
1500(UNC) ANSI UNC Hand Tap Bright
1500(UNF) ANSI UNF Hand Tap Bright
1500(UNS) ANSI UNS Hand Tap Bright
1500A(UNC) ANSI UNC Hand Tap ST
1500A(UNF) ANSI UNF Hand Tap ST
1500L(UNC) ANSI UNC Left Hand Bright
1500L(UNF) ANSI UNF Left Hand Bright
1500L(UNS) ANSI UNS Left Hand Bright
1500OV(UNC) ANSI UNC Hand Tap, oversize .005” Bright
1500S ANSI Sets Hand Tap set, 3-piece Bright
1505(UNC) ANSI UNC Hand Tap, 8-Pitch Bright
1505(UNS) ANSI UNS Hand Tap, 8-Pitch Bright
1508(UNC) ANSI UNC Hand Tap, Optional Flutes Bright
1508(UNF) ANSI UNF Hand Tap, Optional Flutes Bright
1519(UNC) ANSI UNC Hand Tap, Pulley style Bright
1528(UNC) ANSI UNC Hand Tap Bright
1528(UNF) ANSI UNF Hand Tap Bright
1528(UNS) ANSI UNS Hand Tap Bright
1528S ANSI Sets Hand Tap set, 3-piece Bright
1572(UNC) ANSI UNC Hand Tap, Screw Thread Insert (STI) Bright
1572(UNF) ANSI UNF Hand Tap, Screw Thread Insert (STI) Bright
1595(UNC) ANSI UNC Hand Tap, Optional Flutes Bright
1595(UNF) ANSI UNF Hand Tap, Optional Flutes Bright
1599(M) ANSI Metric Hand Tap, Cast iron Nitride, ST
1599(UNC) ANSI UNC Hand Tap, Cast iron Nitride, ST
1599(UNF) ANSI UNF Hand Tap, Cast iron Nitride, ST
1599SB(M) ANSI Metric Hand Tap, Cast Iron, Semi-Bottoming Nitride, ST
1600(UNC) ANSI UNC Hand Tap, Cast iron Nitride, ST
1600(UNF) ANSI UNF Hand Tap, Cast iron Nitride, ST
1700(M) ANSI Metric Hand Tap Bright
1700S ANSI Metric Hand Tap set, 3-piece Bright
E053 ISO Metric MTT-X, Machine Tap TiAlN
E054 ISO Metric MTT-X, Machine Tap TiAlN
E059 ISO UNC MTT-X, Machine Tap TiAlN
E061 ANSI UNC MTT, Hand Tap Gold
E071 ANSI UNF MTT, Hand Tap Gold
E500 ISO Metric Machine Tap, Straight Flute Bright
E501 ISO Metric Machine Tap, Straight Flute Bright
E513 ISO Metric Machine Tap, Straight Flute Bright
T100 DIN Metric Carbide TiAlN
T110 DIN Metric Carbide TiAlN
TN1500(UNC) ANSI UNC Hand Tap TiN
TN1500(UNF) ANSI UNF Hand Tap TiN
U1511 ANSI UNC Hand Tap, Nut style Bright
220
222
223
228
228
230
230
231
231
224
234
235
232
232
238
216
218
218
219
236
237
233
233
241
240
240
241
239
239
225
227
242
243
242
212
214
244
247
248
211
211
229
229
237
Threading with Taps
Icon Guide for Taps
Tap Drill Sizes for Metric M-Profi le Screw Threads
Tap Drill Sizes for Forming Taps
Forming Tap Drill Sizes for Self-Locking Threads
Tap Projection and Hole Size for Pipe Taps
Tap Size Recommendations for Classes 2B and 3B
Unifi ed Screw Thread Limits
Tapping Speeds
Tap Technical Charts
202
203
204
205
206
207
208
209
210
Page
183
Tap Table of Contents
Style Standard Thread
Designation Description Finish Page
No.
Spiral Point
1534(UNC) ANSI UNC Relieved Style Bright
1534(UNF) ANSI UNF Relieved Style Bright
1534NE(UNC) ANSI UNC Extension Non-Relieved Style Bright
1534NE(UNF) ANSI UNF Extension Non-Relieved Style Bright
1534NR(UNC) ANSI UNC Non-Relieved Style Bright
1534NR(UNF) ANSI UNF Non-Relieved Style Bright
1534NR(UNS) ANSI UNS Non-Relieved Style Bright
1578(UNC)(UNF) ANSI UNC Screw Thread Insert (STI) Bright
1585(UNC) ANSI UNC Relieved Style Bright
1585(UNF) ANSI UNF Relieved Style Bright
1585A(UNC) ANSI UNC Relieved Style ST
1585A(UNF) ANSI UNF Relieved Style ST
1585NR(UNC) ANSI UNC Non-Relieved Style Bright
1585NR(UNF) ANSI UNF Non-Relieved Style Bright
1585OV(UNC) ANSI UNC Relieved Style, .005” oversize Bright
1593(UNC)(UNF) ANSI UNC Relieved Style, .003”/.0035 oversize Bright
1634(UNC) (UNF) ANSI UNC Relieved Style Gold
1785M ANSI Metric Relieved Style Bright
1785NR ANSI Metric Non-Relieved Style Bright
1985(UNC) ANSI UNC Relieved Style, DDX, High Hook ST
1985(UNF) ANSI UNF Relieved Style, DDX, High Hook ST
E000 ISO Metric MTT-X, Machine Tap Gold
E001 ISO Metric MTT-X, Machine Tap ST
E005 ANSI Metric MTT-X, Machine Tap Gold
E006 ANSI Metric MTT-X, Machine Tap ST
E010 ISO Metric MTT-X, Machine Tap Gold
E011 ISO Metric MTT-X, Machine Tap ST
E015 ANSI Metric MTT-X, Machine Tap Gold
E016 ANSI Metric MTT-X, Machine Tap ST
E025 ANSI UNC MTT-X, Machine Tap Gold
E026 ANSI UNC MTT-X, Machine Tap ST
E035 ANSI UNF MTT-X, Machine Tap Gold
E036 ANSI UNF MTT-X, Machine Tap ST
E045 ISO Metric MTT-X, Machine Tap ST
E046 ISO Metric MTT-X, Machine Tap Gold
E049 ISO Metric MTT-X, Machine Tap Gold
E055 ISO UNC MTT-X, Machine Tap ST
E057 ISO UNC MTT-X, Machine Tap Gold
E060 ISO UNF MTT-X, Machine Tap ST
TN1534(UNC) ANSI UNC Relieved Style TiN
TN1534(UNF) ANSI UNF Relieved Style TiN
TN1585 (UNC) ANSI UNC Relieved Style TiN
TN1585(UNF) ANSI UNF Relieved Style TiN
TN1785 ANSI Metric Relieved Style TiN
266
267
283
283
276
277
277
284
270
271
272
272
278
279
281
280
268
275
282
274
274
259
260
256
257
261
262
258
258
252
254
253
255
263
264
263
264
265
265
269
269
273
273
275
(con‘t)
184
Tap Table of Contents
Style Standard Thread
Designation Description Finish Page
No.
Spiral Flute
1582(UNC) ANSI UNC Machine Tap Bright
1582(UNF) ANSI UNF Machine Tap Bright
1586(UNC) ANSI UNC Machine Tap Bright
1586(UNF) ANSI UNF Machine Tap Bright
1587(UNC) ANSI UNC Machine Tap, High Spiral Helicut, 52° Bright
1587(UNF) ANSI UNF Machine Tap, High Spiral Helicut, 52° Bright
1588(UNC) ANSI UNC Machine Tap, High Spiral Helicut, 52° Bright
1588(UNF) ANSI UNF Machine Tap, High Spiral Helicut, 52° Bright
1590(UNC) ANSI UNC Heavy-Duty, High Spiral Flute ST
1590(UNF) ANSI UNF Heavy-Duty, High Spiral Flute ST
1591(UNC) ANSI UNC Heavy-Duty, High Spiral Flute ST
1591(UNF) ANSI UNF Heavy-Duty, High Spiral Flute ST
1788(M) ANSI Metric Machine Tap, High Spiral Helicut, 52° Bright
E002 ISO Metric MTT-X, Machine Tap Gold
E003 ISO Metric MTT-X, Machine Tap ST
E007 ANSI Metric MTT-X, Machine Tap Gold
E008 ANSI Metric MTT-X, Machine Tap ST
E012 ISO Metric MTT-X, Machine Tap Gold
E013 ISO Metric MTT-X, Machine Tap ST
E017 ANSI Metric MTT-X, Machine Tap Gold
E018 ANSI Metric MTT-X, Machine Tap ST
E027 ANSI UNC MTT-X, Machine Tap Gold
E028 ANSI UNC MTT-X, Machine Tap ST
E037 ANSI UNF MTT-X, Machine Tap Gold
E038 ANSI UNF MTT-X, Machine Tap ST
E044 ISO Metric MTT-X, Machine Tap Gold
E048 ISO Metric MTT-X, Machine Tap Super B
E050 ISO Metric MTT-X, Machine Tap TiAlN
E051 ISO Metric MTT-X, Machine Tap TiAlN
E052 ISO Metric MTT-X, Machine Tap Gold
E058 ISO UNC MTT-X, Machine Tap TiAlN
E069 ANSI UNC MTT-X, Machine Tap ST
E079 ANSI UNF MTT-X, Machine Tap ST
E085 ANSI Metric MTT-X, Machine Tap ST
301
301
302
302
303
303
304
304
306
306
307
307
305
294
295
291
291
296
297
292
292
285
286
287
288
299
299
298
298
300
300
289
290
293
316
314
315
319
317
318
320
321
310
308
309
309
310
313
311
311
312
312
1580(M) ANSI Metric Rol-Rite™, Thread Forming Bright
1580(UNC) ANSI UNC Rol-Rite™, Thread Forming Bright
1580(UNF) ANSI UNF Rol-Rite™, Thread Forming Bright
3300(M) ANSI Metric Rol-Form™, Thread Forming Bright
3300(UNC) ANSI UNC Rol-Form™, Thread Forming Bright
3300(UNF) ANSI UNF Rol-Form™, Thread Forming Bright
3306E(UNC) ANSI UNC Rol-Form™, Extension Style, Thrd Form Bright
3306E(UNF) ANSI UNF Rol-Form™, Extension Style, Thrd Form Bright
E009 ANSI Metric MTT-X, Thread Forming TiN
E029 ANSI UNC MTT-X, Thread Forming TiN
E039 ANSI UNF MTT-X, Thread Forming TiN
E064 ANSI UNC MTT-X, Thread Forming Gold
E074 ANSI UNF MTT-X, Thread Forming Gold
E080 ISO Metric MTT-X, Thread Forming Dialub
E094 ANSI Metric MTT-X, Thread Forming Gold
E097 ISO Metric MTT-X, Thread Forming CrN
E098 ISO Metric MTT-X, Thread Forming TiN
E099 ISO Metric MTT-X, Thread Forming TiN
Thread Forming
www.precisiondormer.com
(con‘t)
185
Tap Table of Contents
Style Standard Thread
Designation Description Finish Page
No.
Pipe Taps
Miscellaneous
1541(NPT) ANSI NPT Medium Hook, Straight Flute Bright
1542(NPS) ANSI NPSM Straight, Regular Thread Bright
1543(NPTF) ANSI NPTF Medium Hook, Straight Flute Bright
1544(NPT) ANSI NPT Taper, Low Rake Angle Nitride
1545(NPT) ANSI NPT Taper, High Hook Bright
1545A(NPT) ANSI NPT Taper, High Hook ST
1546(NPTF) ANSI NPTF Taper, High Hook Bright
1548(NPT) ANSI NPT Taper, Medium Hook, 30° Spiral Flute Bright
1549(NPTF) ANSI NPTF Taper, Medium Hook, 30° Spiral Flute Bright
1567(NPTF) ANSI NPTF Taper, Interrupted Thread Bright
1568(NPT) ANSI NPT Taper, Interrupted Thread Bright
1592(NPSF) ANSI NPSF Straight, Dryseal, Regular Thread Bright
E040 ISO G MTT-X, Machine Tap Gold
E041 ISO G MTT-X, Machine Tap ST
E042 ISO G MTT-X, Machine Tap Gold
E043 ISO G MTT-X, Machine Tap ST
E547 ISO G Machine Tap, (BSPF) Bright
E550 ISO Rc Machine Tap, (BSPT) Bright
E710 ANSI NPT Pipe Tap Bright
TN1541 ANSI NPT Medium Hook, Straight Flute TiN
TN1543 ANSI NPTF Medium Hook, Straight Flute TiN
1994(UNC) ANSI UNC Combination Drill/Tap Bright
1994(UNF) ANSI UNF Combination Drill/Tap Bright
E650 ISO Metric Combination Drill/Tap ST
E651 ISO UNC Combination Drill/Tap ST
E653 ANSI NPT Combination Drill/Tap Bright
229C ANSI N/A Drill/Tap Set, 9-Piece Bright
1215 ANSI N/A T-Handle Tap Wrench N/A
1301 ANSI N/A Die stock N/A
3850 ANSI N/A Straight-Handle Tap Wrench N/A
323
329
324
325
325
326
326
328
328
327
327
329
330
330
331
331
332
333
322
323
324
334
334
335
335
336
337
337
338
338
www.precisiondormer.com
2010 UNC, UNF, UNS, NPT Carbon Steel Bright 341
2025 UNC, UNF, UNS, NPT Carbon Steel Bright 339
2025S Sets Carbon Steel Bright 340
2325M Metric Carbon Steel Bright 340
2510 UNC, UNF HSS Bright 342
2710M Metric HSS Bright 343
3150 Tap/Round Die Sets Carbon Steel, HSS Bright 344
(con‘t)
Dies
1
1
2
2
3
3
4
4
2
2
1
1
Straight Flute Taps
www.precisiondormer.com
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG) With Examples
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
= Excellent = Good
Page # for easy reference
Straight Flute Taps
Style:
Thread Form:
Thread Designation:
Chamfer:
Depth:
Tolerance:
Standard:
Through/Blind Hole:
Direction:
Finish/Coating:
Tool Material:
Coolant:
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
Page # for easy reference
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Hole Type and other Product Features.
Locate your Best Product Choices and Surface Feet per Minute
(SFM). example: 72 72 = SFM
NOTE: Additional cutting charts located
on pages 204-210.Tool Brand:
186
3
3
Ŷ = Excellent for Application
Ɣ= Good for Application
Surface Feet Per Minute (SFM)
T100 T110
211 211
Ŷ20 Ɣ20
Ɣ13 Ŷ13
Ɣ197
Ɣ98
Ɣ23
Ɣ197
Ɣ164
Ɣ98
Ɣ82
E061, E071
212-215
Ɣ72
Ɣ66
Ɣ52
Ɣ39
Ɣ23
Ɣ13
Ŷ39
Ŷ23
Ŷ33
Ŷ16
Ɣ39
Ɣ98
Ɣ66
Ɣ66
Ŷ49
Ɣ39
Ɣ23
Straight Flute Taps(con‘t)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Straight Flute Taps
www.precisiondormer.com 187
Surface Feet Per Minute (SFM)
1528
216-218
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ20
Ɣ13
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ16
Ɣ23
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
1528
218
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ20
Ɣ13
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ16
Ɣ23
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
1500
220-223
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ20
Ɣ13
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ16
Ɣ23
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
1500
223
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ20
Ɣ13
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ16
Ɣ23
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
1700 1500A TN1500
225- 228 229
Ɣ49 Ɣ49 Ɣ59
Ɣ36 Ɣ36 Ɣ46
Ɣ26 Ɣ26 Ɣ30
Ɣ26 Ɣ26 Ɣ30
Ɣ16 Ɣ16 Ɣ20
Ɣ7Ɣ7Ɣ10
Ɣ20 Ɣ20 Ɣ26
Ɣ13 Ɣ13 Ɣ26
Ɣ13 Ɣ13 Ɣ16
Ɣ39 Ɣ39 Ɣ49
Ɣ26 Ɣ26 Ɣ30
Ɣ26 Ɣ26 Ɣ30
Ɣ13 Ɣ13 Ɣ16
Ɣ16 Ɣ16 Ɣ20
Ɣ13 Ɣ13 Ɣ16
Ɣ16 Ɣ16 Ɣ20
Ɣ23 Ɣ23 Ɣ10
Ɣ20 Ɣ20 Ɣ26
Ɣ66 Ɣ66 Ɣ79
Ɣ49 Ɣ49 Ɣ59
Ɣ7Ɣ7Ɣ10
Ɣ39 Ɣ39 Ɣ49
Ɣ79 Ɣ79 Ɣ98
Ɣ59 Ɣ59 Ɣ75
Ɣ16 Ɣ16 Ɣ20
Ɣ26 Ɣ26 Ɣ30
Ɣ13 Ɣ13 Ɣ16
1500L
230-231
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ20
Ɣ13
Ɣ13
Ɣ39
Ɣ26
Ɣ26
Ɣ13
Ɣ16
Ɣ13
Ɣ16
Ɣ23
Ɣ20
Ɣ66
Ɣ49
Ɣ7
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13
1500OV 1508
231 232
Ɣ49 Ɣ49
Ɣ36 Ɣ36
Ɣ26 Ɣ26
Ɣ26 Ɣ26
Ɣ16 Ɣ16
Ɣ7Ɣ7
Ɣ20 Ɣ20
Ɣ13 Ɣ13
Ɣ13 Ɣ13
Ɣ39 Ɣ39
Ɣ26 Ɣ26
Ɣ26 Ɣ26
Ɣ13 Ɣ13
Ɣ16 Ɣ16
Ɣ13 Ɣ13
Ɣ16 Ɣ16
Ɣ23 Ɣ23
Ɣ20 Ɣ20
Ɣ66 Ɣ66
Ɣ49 Ɣ49
Ɣ7Ɣ7
Ɣ39 Ɣ39
Ɣ79 Ɣ79
Ɣ59 Ɣ59
Ɣ16 Ɣ16
Ɣ26 Ɣ26
Ɣ13 Ɣ13
1595 1505
233 234-235
Ŷ66 Ɣ49
Ŷ59 Ɣ36
Ŷ39 Ɣ26
Ŷ39 Ɣ26
Ŷ26 Ɣ16
Ɣ16 Ɣ7
Ɣ30 Ɣ20
Ɣ20 Ɣ13
Ɣ20 Ɣ13
Ɣ46 Ɣ39
Ɣ26 Ɣ26
Ɣ26 Ɣ26
Ɣ16 Ɣ13
Ɣ20 Ɣ16
Ɣ16 Ɣ13
Ɣ7
Ɣ26 Ɣ16
Ɣ10 Ɣ23
Ɣ30 Ɣ20
Ɣ89 Ɣ66
Ɣ69 Ɣ49
Ɣ10 Ɣ7
Ɣ49 Ɣ39
Ɣ98 Ɣ79
Ɣ66 Ɣ59
Ɣ20 Ɣ16
Ŷ98 Ɣ26
Ɣ26 Ɣ13
1572 U1511
236-237 237
Ɣ49 Ɣ39
Ɣ30 Ɣ33
Ɣ26 Ɣ26
Ɣ26 Ɣ20
Ɣ16
Ɣ16
Ɣ7
Ɣ46
Ɣ26
Ɣ39
Ŷ26
Ŷ66 Ɣ52
Ŷ49 Ɣ39
Ŷ39
Ŷ79 Ɣ66
Ŷ59 Ɣ39
Ɣ16
Ɣ26
1
1
2
2
3
3
4
4
2
2
1
1
Straight Flute Taps
www.precisiondormer.com
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG) With Examples
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
= Excellent = Good
Page # for easy reference
Straight Flute Taps
Style:
Thread Form:
Thread Designation:
Chamfer:
Depth:
Tolerance:
Standard:
Through/Blind Hole:
Direction:
Finish/Coating:
Tool Material:
Coolant:
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
Page # for easy reference
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Hole Type and other Product Features.
Locate your Best Product Choices and Surface Feet per Minute
(SFM). example: 72 72 = SFM
NOTE: Additional cutting charts located
on pages 204-210.Tool Brand:
188
3
3
Ŷ = Excellent for Application
Ɣ= Good for Application
Surface Feet Per Minute (SFM)
1519 1600
238 239
Ɣ49
Ɣ36
Ɣ26
Ɣ26
Ɣ16
Ɣ7
Ɣ20
Ɣ13
Ɣ13
Ɣ39 Ŷ49
Ɣ26 Ŷ36
Ɣ26 Ŷ36
Ɣ13 Ŷ20
Ɣ16
Ɣ13
Ɣ16
Ɣ7
Ɣ20
Ɣ66
Ɣ49
Ɣ7Ɣ13
Ɣ39
Ɣ79
Ɣ59
Ɣ16
Ɣ26
Ɣ13 Ɣ13
1599 1599SB
240-241 241
Ŷ49 Ŷ49
Ŷ36 Ŷ36
Ŷ36 Ŷ36
Ŷ20 Ŷ20
Ɣ13 Ɣ13
Ɣ13 Ɣ13
Straight Flute Taps(con‘t)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Straight Flute Taps
www.precisiondormer.com 189
Surface Feet Per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
E059 E053 E054 E500 E501 E513
242 242 243 244-247 247 248-251
Ɣ23 Ɣ23 Ɣ23
Ɣ20 Ɣ20 Ɣ20
Ɣ16 Ɣ16 Ɣ16
Ɣ13 Ɣ13 Ɣ13
Ɣ10 Ɣ10 Ɣ10
Ŷ72 Ŷ72 Ŷ72 Ɣ39 Ɣ39 Ɣ39
Ŷ59 Ŷ59 Ŷ59 Ɣ23 Ɣ23 Ɣ23
Ŷ82 Ŷ82 Ŷ82 Ɣ33 Ɣ33 Ɣ33
Ɣ59 Ɣ59 Ɣ59 Ɣ16 Ɣ16 Ɣ16
Ɣ13 Ɣ13 Ɣ13
Ɣ98 Ɣ98 Ɣ98 Ɣ33 Ɣ33 Ɣ33
Ɣ23 Ɣ23 Ɣ23
Ɣ13 Ɣ13 Ɣ13 Ɣ7Ɣ7Ɣ7
Ɣ39 Ɣ39 Ɣ39
Ɣ23 Ɣ23 Ɣ23
Ɣ66 Ɣ66 Ɣ66 Ɣ16 Ɣ16 Ɣ16
Ŷ49 Ŷ49 Ŷ49 Ɣ16 Ɣ16 Ɣ16
Ɣ10 Ɣ10 Ɣ10
E025
252
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33
Ɣ16
Ɣ49
Ɣ26
Ɣ49
Ɣ26
Ɣ33
Ɣ16
Ɣ39
Ɣ16
Ŷ39
Ɣ98
Ŷ66
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
E035 E026 E036 E005 E006 E015 E016
253 254 255 256 257 258 258
Ŷ82 Ŷ82 Ŷ82 Ŷ82 Ŷ82 Ŷ82 Ŷ82
Ŷ72 Ŷ72 Ŷ72 Ŷ72 Ŷ72 Ŷ72 Ŷ72
Ŷ59 Ŷ59 Ŷ59 Ŷ59 Ŷ59 Ŷ59 Ŷ59
Ŷ52 Ŷ52 Ŷ52 Ŷ52 Ŷ52 Ŷ52 Ŷ52
Ŷ33 Ŷ33 Ŷ33 Ŷ33 Ŷ33 Ŷ33 Ŷ33
Ɣ16 Ɣ16 Ɣ16 Ɣ16 Ɣ16 Ɣ16 Ɣ16
Ŷ26 Ŷ26 Ŷ26 Ŷ26
Ŷ23 Ŷ23 Ŷ23 Ŷ23
Ɣ16 Ɣ16 Ɣ16 Ɣ16
Ɣ49 Ɣ49 Ɣ49 Ɣ49 Ɣ49 Ɣ49 Ɣ49
Ɣ26 Ɣ26 Ɣ26 Ɣ26 Ɣ26 Ɣ26 Ɣ26
Ɣ49 Ɣ49 Ɣ49 Ɣ49 Ɣ49 Ɣ49 Ɣ49
Ɣ26 Ɣ26 Ɣ26 Ɣ26 Ɣ26 Ɣ26 Ɣ26
Ɣ33 Ɣ33 Ɣ33
Ɣ16 Ɣ16 Ɣ16
Ɣ39 Ɣ39 Ɣ39
Ɣ16 Ɣ16 Ɣ16
Ŷ39 Ŷ39 Ŷ39
Ɣ98 Ɣ98 Ɣ98
Ŷ66 Ŷ66 Ŷ66
Ŷ52 Ŷ52 Ŷ52
Ŷ115 Ŷ115 Ŷ115
Ŷ66 Ŷ66 Ŷ66
Ŷ49 Ŷ49 Ŷ49
Ɣ98 Ɣ98 Ɣ98
Spiral Point Taps
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
www.precisiondormer.com
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG) With Examples
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Spiral Point Taps
Spiral Point Taps
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG) With Examples
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Page # for easy reference
Style:
Thread Form:
Flute Form:
Chamfer:
Depth:
Tolerance:
Standard:
Through/Blind Hole:
Direction:
Finish/Coating:
Tool Material:
Coolant:
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Tool Brand:
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Hole Type and other Product Features.
Locate your Best Product Choices and Surface Feet
per Minute (SFM). example: 72 72 = SFM
NOTE: Additional cutting charts located on
pages 204-210.
Page # for easy reference
1
1
2
2
3
3
4
4
2
2
1
1
3
3
Ŷ = Excellent for Application
Ɣ= Good for Application
E045
263
Ɣ33
Ɣ16
Ŷ26
Ŷ23
Ŷ16
Ŷ16
Surface Feet Per Minute (SFM)
190
E000 E001 E010 E011
259 260 261 262
Ŷ82 Ŷ82 Ŷ82 Ŷ82
Ŷ72 Ŷ72 Ŷ72 Ŷ72
Ŷ59 Ŷ59 Ŷ59 Ŷ59
Ŷ52 Ŷ52 Ŷ52 Ŷ52
Ŷ33 Ŷ33 Ŷ33 Ŷ33
Ɣ16 Ɣ16 Ɣ16 Ɣ16
Ɣ23 Ɣ23
Ɣ20 Ɣ20
Ɣ13 Ɣ13
Ɣ49 Ɣ49 Ɣ49 Ɣ49
Ɣ26 Ɣ26 Ɣ26 Ɣ26
Ɣ49 Ɣ49 Ɣ49 Ɣ49
Ɣ26 Ɣ26 Ɣ26 Ɣ26
Ɣ33 Ɣ33
Ɣ16 Ɣ16
Ɣ39 Ɣ39
Ɣ16 Ɣ16
Ŷ39 Ŷ39
Ɣ98 Ɣ98
Ŷ66 Ŷ66
Ŷ52 Ŷ52
Ŷ115 Ŷ115
Ŷ66 Ŷ66
Ŷ49 Ŷ49
Ɣ98 Ɣ98
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Spiral Point Taps(con‘t)
Spiral Point Taps
www.precisiondormer.com
E049 E046 E055 E057 E060
263 264 264 265 265
Ŷ131 Ŷ131
Ŷ131 Ŷ131
Ŷ105 Ŷ105
Ŷ98 Ŷ98
Ŷ56 Ɣ56 Ɣ33 Ŷ56 Ɣ33
Ɣ36 Ɣ36 Ɣ16 Ɣ36 Ɣ16
Ŷ46 Ŷ26 Ŷ26
Ŷ33 Ŷ23 Ŷ23
Ŷ20 Ŷ16 Ŷ16
Ŷ20 Ŷ16 Ŷ16
Ɣ72 Ɣ72
Ɣ59 Ɣ59
Ɣ82 Ɣ82
Ɣ59 Ɣ59
Ŷ49
Ɣ23 Ɣ23
Ɣ49
Ɣ26 Ɣ26 Ɣ26
Ŷ59 Ŷ59
Ɣ148 Ɣ148
Ŷ115 Ŷ115
1534 1634
266-267 268
Ŷ66 Ŷ66
Ŷ66 Ŷ66
Ŷ39 Ŷ39
Ŷ39 Ŷ39
Ŷ26 Ŷ26
Ɣ16 Ɣ16
Ɣ30 Ɣ30
Ɣ20 Ɣ20
Ɣ20 Ɣ20
Ɣ46 Ɣ46
Ɣ26 Ɣ26
Ɣ26 Ɣ26
Ɣ16 Ɣ16
Ɣ20 Ɣ20
Ɣ16 Ɣ16
Ɣ7Ɣ7
Ɣ26 Ɣ26
Ɣ10 Ɣ10
Ɣ30 Ɣ30
Ɣ89 Ɣ89
Ɣ69 Ɣ69
Ɣ10 Ɣ10
Ɣ49 Ɣ49
Ɣ98 Ɣ98
Ɣ66 Ɣ66
Ɣ20 Ɣ20
Ŷ98 Ŷ98
Ɣ26 Ɣ26
TN1534 1585
269 270-271
Ŷ79 Ŷ66
Ŷ75 Ŷ66
Ŷ49 Ŷ39
Ŷ15 Ŷ39
Ŷ49 Ŷ26
Ŷ20 Ɣ16
Ŷ39 Ɣ30
Ŷ26 Ɣ20
Ɣ26 Ɣ20
Ɣ49 Ɣ46
Ɣ30 Ɣ26
Ɣ30 Ɣ26
Ɣ20 Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ŷ30 Ɣ26
Ŷ13 Ɣ10
Ŷ39 Ɣ30
Ŷ115 Ɣ89
Ŷ89 Ɣ69
Ɣ13 Ɣ10
Ŷ66 Ɣ49
Ŷ125 Ɣ98
Ŷ79 Ɣ66
Ŷ26 Ɣ20
Ŷ121 Ŷ98
Ŷ30 Ɣ26
1585A
272
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ɣ30
Ɣ20
Ɣ20
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
TN1585 TN1585 1985
273 273 274
Ŷ79 Ŷ79 Ŷ75
Ŷ75 Ŷ75 Ŷ69
Ŷ49 Ŷ49 Ŷ49
Ŷ49 Ŷ49 Ŷ49
Ŷ30 Ŷ30 Ŷ30
Ŷ20 Ŷ20 Ɣ16
Ŷ39 Ŷ39 Ŷ36
Ŷ26 Ŷ26 Ɣ20
Ɣ26 Ɣ26
Ɣ49 Ɣ49
Ɣ30 Ɣ30
Ɣ30 Ɣ30
Ɣ20 Ɣ20
Ŷ20
Ŷ16
Ŷ7
Ŷ30 Ŷ30 Ŷ30
Ŷ13 Ŷ13 Ŷ16
Ŷ10
Ŷ39 Ŷ39
Ŷ115 Ŷ115
Ŷ89 Ŷ89
Ɣ13 Ɣ13
Ŷ66 Ŷ66
Ŷ125 Ŷ125
Ŷ79 Ŷ79
Ŷ26 Ŷ26
Ŷ121 Ŷ121
Ŷ30 Ŷ30
Surface Feet Per Minute (SFM)
191
www.precisiondormer.com
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG) With Examples
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Spiral Point Taps
Spiral Point Taps
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG) With Examples
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Page # for easy reference
Style:
Thread Form:
Flute Form:
Chamfer:
Depth:
Tolerance:
Standard:
Through/Blind Hole:
Direction:
Finish/Coating:
Tool Material:
Coolant:
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Tool Brand:
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Hole Type and other Product Features.
Locate your Best Product Choices and Surface Feet
per Minute (SFM). example: 72 72 = SFM
NOTE: Additional cutting charts located on
pages 204-210.
Page # for easy reference
1
1
2
2
3
3
4
4
2
2
1
1
3
3
Ŷ = Excellent for Application
Ɣ= Good for Application
1534NR
277
Ŷ66
Ŷ66
Ŷ39
Ŷ39
Ŷ26
Ɣ16
Ɣ30
Ɣ20
Ɣ20
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ20
Ɣ16
Ɣ7
Ɣ26
Ɣ10
Ɣ30
Ɣ89
Ɣ69
Ɣ10
Ɣ49
Ɣ98
Ɣ66
Ɣ20
Ŷ98
Ɣ26
Surface Feet Per Minute (SFM)
(con‘t)
192
1785M TN1785 1534NR
275 275 276-277
Ŷ66 Ŷ79 Ŷ66
Ŷ66 Ŷ75 Ŷ66
Ŷ39 Ŷ49 Ŷ39
Ŷ39 Ŷ49 Ŷ39
Ŷ26 Ŷ30 Ŷ26
Ɣ16 Ŷ20 Ɣ16
Ɣ30 Ŷ39 Ɣ30
Ɣ20 Ŷ26 Ɣ20
Ɣ20 Ɣ26 Ɣ20
Ɣ46 Ɣ49 Ɣ46
Ɣ26 Ɣ30 Ɣ26
Ɣ26 Ɣ30 Ɣ26
Ɣ16 Ɣ20 Ɣ16
Ɣ20 Ɣ20
Ɣ16 Ɣ16
Ɣ7Ɣ7
Ɣ26 Ŷ30 Ɣ26
Ɣ10 Ŷ13 Ɣ10
Ɣ30 Ŷ39 Ɣ30
Ɣ89 Ŷ115 Ɣ89
Ɣ69 Ŷ89 Ɣ69
Ɣ10 Ɣ13 Ɣ10
Ɣ49 Ŷ66 Ɣ49
Ɣ98 Ŷ125 Ɣ98
Ɣ66 Ŷ79 Ɣ66
Ɣ20 Ŷ26 Ɣ20
Ŷ98 Ŷ121 Ŷ98
Ɣ26 Ŷ30 Ɣ26
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Spiral Point Taps(con‘t)
Spiral Point Taps
www.precisiondormer.com
1585NR
278-279
Ŷ66
Ŷ59
Ŷ46
Ŷ33
Ŷ16
Ɣ10
Ɣ20
Ɣ13
Ɣ10
Ɣ46
Ɣ26
Ɣ26
Ɣ16
Ɣ10
Ɣ33
Ɣ13
Ɣ33
Ɣ49
Ɣ33
Ɣ82
Ɣ43
Ɣ33
Ŷ66
1593 1585OV
280 281
Ŷ66 Ŷ66
Ŷ66 Ŷ66
Ŷ39 Ŷ39
Ŷ39 Ŷ39
Ŷ26 Ŷ26
Ɣ16 Ɣ16
Ɣ30 Ɣ30
Ɣ20 Ɣ20
Ɣ20 Ɣ20
Ɣ46 Ɣ46
Ɣ26 Ɣ26
Ɣ26 Ɣ26
Ɣ16 Ɣ16
Ɣ20 Ɣ20
Ɣ16 Ɣ16
Ɣ7Ɣ7
Ɣ26 Ɣ26
Ɣ10 Ɣ10
Ɣ30 Ɣ30
Ɣ89 Ɣ89
Ɣ69 Ɣ69
Ɣ10 Ɣ10
Ɣ49 Ɣ49
Ɣ98 Ɣ98
Ɣ66 Ɣ66
Ɣ20 Ɣ20
Ŷ98 Ŷ98
Ɣ26 Ɣ26
1785NR 1534NE
282 283
Ŷ66 Ŷ66
Ŷ66 Ŷ66
Ŷ39 Ŷ39
Ŷ39 Ŷ39
Ŷ26 Ŷ26
Ɣ16 Ɣ16
Ɣ30 Ɣ30
Ɣ20 Ɣ20
Ɣ20 Ɣ20
Ɣ46 Ɣ46
Ɣ26 Ɣ26
Ɣ26 Ɣ26
Ɣ16 Ɣ16
Ɣ20 Ɣ20
Ɣ16 Ɣ16
Ɣ7Ɣ7
Ɣ26 Ɣ26
Ɣ10 Ɣ10
Ɣ30 Ɣ30
Ɣ89 Ɣ89
Ɣ69 Ɣ69
Ɣ10 Ɣ10
Ɣ49 Ɣ49
Ɣ98 Ɣ98
Ɣ66 Ɣ66
Ɣ20 Ɣ20
Ŷ98 Ŷ98
Ɣ26 Ɣ26
Surface Feet Per Minute (SFM) Surface Feet Per Minute (SFM)
Spiral Point /Spiral Flute Taps(con‘t)
193
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Spiral Flute Taps
1578
284
Ɣ66
Ɣ59
Ɣ46
Ɣ33
Ɣ16
Ɣ10
Ɣ20
Ɣ13
Ɣ10
Ɣ10
Ɣ33
Ɣ13
Ɣ33
Ɣ49
Ɣ33
Ɣ82
Ɣ43
Ɣ33
Ɣ66
E027 E028 E037 E038 E069 E079 E007 E008 E017
285 286 287 288 289 290 291 291 292
Ŷ82 Ŷ82 Ŷ82 Ŷ82 Ŷ82 Ŷ82 Ŷ82
Ŷ72 Ŷ72 Ŷ72 Ŷ72 Ŷ72 Ŷ72 Ŷ72
Ŷ59 Ŷ59 Ŷ59 Ŷ59 Ŷ59 Ŷ59 Ŷ59
Ŷ52 Ŷ52 Ŷ52 Ŷ52 Ŷ52 Ŷ52 Ŷ52
Ŷ33 Ŷ33 Ŷ33 Ŷ33 Ɣ33 Ɣ33 Ŷ33 Ŷ33 Ŷ33
Ɣ16 Ɣ16 Ɣ16 Ɣ16
Ɣ23 Ɣ23 Ŷ23 Ŷ23 Ɣ23
Ɣ20 Ɣ20 Ŷ20 Ŷ20 Ɣ20
Ɣ13 Ɣ13 Ŷ13 Ŷ13 Ɣ13
Ɣ33 Ɣ33 Ɣ33 Ɣ33
Ɣ16 Ɣ16 Ɣ16 Ɣ16
Ɣ39 Ɣ39 Ɣ39 Ɣ39
Ɣ16 Ɣ16 Ɣ16 Ɣ16
Ŷ39 Ŷ39 Ŷ39
Ɣ98 Ɣ98 Ɣ98
Ŷ66 Ŷ66 Ŷ66
Ŷ52 Ŷ52 Ŷ52 Ŷ52
Ŷ115 Ŷ115 Ŷ115 Ŷ115
Ŷ66 Ŷ66 Ŷ66 Ŷ66
Ŷ49 Ŷ49 Ŷ49 Ŷ49
Ɣ98 Ɣ98 Ɣ98
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
E018 E085
292 293
Ŷ82
Ŷ72
Ŷ59
Ŷ52
Ŷ33 Ɣ33
Ɣ16
Ɣ23 Ŷ23
Ɣ20 Ŷ20
Ɣ13 Ŷ13
E002 E003
294 295
Ŷ82 Ŷ82
Ŷ72 Ŷ72
Ŷ59 Ŷ59
Ŷ52 Ŷ52
Ŷ33 Ŷ33
Ɣ23
Ɣ20
Ɣ13
Ɣ33
Ɣ16
Ɣ39
Ɣ16
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Surface Feet Per Minute (SFM)
Spiral Flute Taps
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG) With Examples
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Spiral Point Taps
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Page # for easy reference
Style :
Thread Form:
Flute Form:
Chamfer:
Depth:
Tolerance:
Standard:
Through/Blind Hole:
Direction:
Finish/Coating:
Tool Material:
Coolant:
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Spiral Flute Taps
www.precisiondormer.com
Tool Brand:
Page # for easy reference
194
1
1
2
2
3
3
2
2
1
1
3
3
4
4
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the AMG
Chart below.
Use the icons to fi nd Hole Type and other Product Features.
Locate your Best Product Choices and Surface Feet per Minute
(SFM). example: 72 72 = SFM
NOTE: Additional cutting charts located on
pages 204-210.
Ŷ = Excellent for Application
Ɣ= Good for Application
1588 1788 1590
304 305 306
Ŷ69
Ŷ59
Ŷ39
Ŷ39
Ɣ30
Ŷ30
Ŷ26
Ŷ20
Ŷ20
Ŷ16
Ɣ7
Ɣ10
Ɣ30 Ɣ30
Ŷ79 Ŷ79
Ŷ79 Ŷ79
Ŷ49 Ŷ49
Ŷ66 Ŷ66
Ŷ66 Ŷ66
E012 E013
296 297
Ŷ82 Ŷ82
Ŷ72 Ŷ72
Ŷ59 Ŷ59
Ŷ52 Ŷ52
Ŷ33 Ŷ33
Ɣ23
Ɣ20
Ɣ13
Ɣ33
Ɣ16
Ɣ39
Ɣ16
Ŷ52
Ŷ115
Ŷ66
Ŷ49
Ɣ98
E050 E051 E048 E044 E052 E058
298 298 299 299 300 300
Ŷ131 Ŷ131 Ɣ82 Ɣ82 Ŷ131
Ŷ131 Ŷ131 Ɣ72 Ɣ72 Ŷ131
Ŷ105 Ŷ105 Ɣ105 Ɣ59 Ɣ59 Ŷ105
Ŷ98 Ŷ98 Ɣ89 Ŷ52 Ŷ52 Ŷ98
Ŷ56 Ŷ56 Ɣ43 Ŷ33 Ŷ33 Ŷ56
Ɣ36 Ɣ36 Ɣ36 Ŷ16 Ɣ36
Ŷ46
Ŷ33
Ŷ20
Ŷ20
Ɣ23 Ɣ23 Ɣ16 Ɣ23
Ɣ26 Ɣ26 Ɣ16 Ɣ26
Ŷ59 Ŷ59 Ɣ39 Ŷ59
Ɣ148 Ɣ148 Ŷ98 Ɣ148
Ŷ115 Ŷ115 Ŷ66 Ŷ115
Ɣ52
Ŷ115
Ŷ66
Ŷ49
1582
301
Ɣ66
Ɣ49
Ɣ36
Ɣ36
Ɣ26
Ɣ20
Ɣ20
Ɣ20
Ɣ16
Ɣ7
Ɣ20
Ɣ16
1586 1587
302 303
Ɣ66
Ɣ49
Ɣ36
Ɣ36
Ɣ26
Ɣ20
Ɣ20
Ɣ20
Ɣ16
Ɣ7
Ɣ20
Ɣ16
Ɣ30
Ŷ79
Ŷ79
Ŷ49
Ŷ66
Ŷ66
1591(UNC)
307
Ŷ69
Ŷ59
Ŷ39
Ŷ39
Ɣ30
Ŷ30
Ŷ26
Ŷ20
Ŷ20
Ŷ16
Ɣ7
Ɣ10
Surface Feet Per Minute (SFM)
Spiral Flute Taps(con‘t)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Spiral Flute Taps
www.precisiondormer.com 195
Thread Forming Taps
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Page # for easy reference
Style:
Thread Form:
Flute Form:
Chamfer:
Depth:
Tolerance:
Standard:
Through/Blind Hole:
Direction:
Finish/Coating:
Tool Material:
Coolant:
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the AMG
Chart below.
Use the icons to fi nd Hole Type and other Product Features.
Locate your Best Product Choices and Surface Feet
per Minute (SFM). example: 72 72 = SFM
NOTE: Additional cutting charts located on
pages 204-210.
Thread Forming Taps
Tool Brand:
196
1
1
2
2
3
3
2
2
1
1
3
3
4
4
Ŷ = Excellent for Application
Ɣ= Good for Application
E029 E064
308 309
Ŷ180 Ɣ98
Ŷ164 Ɣ89
Ŷ148 Ɣ75
Ŷ131 Ɣ66
Ɣ66
Ŷ59
Ŷ49
Ɣ33
Ŷ115
Ŷ66
Ɣ26
Ɣ82
Ɣ131
Ŷ131 Ɣ72
Ŷ180 Ɣ125
Ŷ131 Ɣ72
Ɣ82
E039 E074
309 310
Ŷ180 Ɣ98
Ŷ164 Ɣ89
Ŷ148 Ɣ75
Ŷ131 Ɣ66
Ɣ66
Ŷ59
Ŷ49
Ɣ33
Ŷ115
Ŷ66
Ɣ26
Ɣ82
Ɣ131
Ŷ131 Ɣ72
Ŷ180 Ɣ125
Ŷ131 Ɣ72
Ɣ82
Surface Feet Per Minute (SFM)
www.precisiondormer.com
Thread Forming Taps (con‘t)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Thread Forming Taps
197
E009 E094
310 311
Ŷ180 Ɣ98
Ŷ164 Ɣ89
Ŷ148 Ɣ75
Ŷ131 Ɣ66
Ɣ66
Ŷ59
Ŷ49
Ɣ33
Ŷ115
Ŷ66
Ɣ26
Ɣ82
Ɣ131
Ŷ131 Ɣ72
Ŷ180 Ɣ125
Ŷ131 Ɣ72
Ɣ82
E097 E098 E099 E080
311 312 312 313
Ŷ180 Ŷ180 Ŷ180
Ŷ164 Ŷ164 Ŷ164
Ŷ148 Ŷ148 Ŷ148
Ɣ131 Ŷ131 Ŷ131
Ɣ66 Ɣ66
Ɣ59 Ŷ59 Ŷ59
Ɣ49 Ŷ49 Ŷ49
Ɣ33 Ɣ33
Ŷ115 Ŷ115 Ŷ115
Ŷ66 Ŷ66 Ŷ66
Ɣ26 Ɣ26 Ɣ26
Ɣ82 Ɣ82 Ɣ82 Ŷ82
Ɣ131 Ɣ131 Ɣ131 Ŷ131
Ŷ131 Ŷ131 Ŷ131 Ŷ131
Ŷ180 Ŷ180 Ŷ180 Ŷ180
Ŷ131 Ŷ131 Ŷ131 Ŷ131
Ɣ82 Ɣ82 Ɣ82
1580(UNC) 1580(UNF) 1580(M) 3300(UNC) 3300(UNF) 3300(M) 3306E(UNC) 3306E(UNF)
314 315 316 317 318 319 320 321
Ŷ98 Ŷ98 Ŷ98 Ŷ98 Ŷ98 Ŷ98 Ŷ98 Ŷ98
Ŷ79 Ŷ79 Ŷ79 Ŷ79 Ŷ79 Ŷ79 Ŷ79 Ŷ79
Ŷ49 Ŷ49 Ŷ49 Ŷ49 Ŷ49 Ŷ49 Ŷ49 Ŷ49
Ŷ49 Ŷ49 Ŷ49 Ŷ49 Ŷ49 Ŷ49 Ŷ49 Ŷ49
Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30
Ɣ39 Ɣ39 Ɣ39 Ɣ39 Ɣ39 Ɣ39 Ɣ39 Ɣ39
Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30
Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30
Ɣ26 Ɣ26 Ɣ26 Ɣ26 Ɣ26 Ɣ26 Ɣ26 Ɣ26
Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30 Ɣ30
Ɣ39 Ɣ39 Ɣ39 Ɣ39 Ɣ39 Ɣ39 Ɣ39 Ɣ39
Ŷ121 Ŷ121 Ŷ121 Ŷ121 Ŷ121 Ŷ121 Ŷ121 Ŷ121
Ŷ98 Ŷ98 Ŷ98 Ŷ98 Ŷ98 Ŷ98 Ŷ98 Ŷ98
Ŷ79 Ŷ79 Ŷ79 Ŷ79 Ŷ79 Ŷ79 Ŷ79 Ŷ79
Ŷ161 Ŷ161 Ŷ161 Ŷ161 Ŷ161 Ŷ161 Ŷ161 Ŷ161
Ŷ98 Ŷ98 Ŷ98 Ŷ98 Ŷ98 Ŷ98 Ŷ98 Ŷ98
Surface Feet Per Minute (SFM)
www.precisiondormer.com
1
1
2
2
3
3
2
2
1
1
3
3
4
4
Surface Feet Per Minute (SFM)
Pipe Taps
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG) With Examples
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Pipe Taps
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Page # for easy reference
Style:
Thread Form:
Flute Form:
Chamfer:
Depth:
Tolerance:
Standard:
Through/Blind Hole:
Direction:
Finish/Coating:
Tool Material:
Coolant:
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the AMG
Chart below.
Use the icons to fi nd Hole Type and other Product Features.
Locate your Best Product Choices and Surface Feet
per Minute (SFM). example: 72 72 = SFM
NOTE: Additional cutting charts located on
pages 204-210.
Page # for easy reference
www.precisiondormer.com
Tool Brand:
198
Ŷ = Excellent for Application
Ɣ= Good for Application
E710 1541 TN1541 1543 TN1543
1/16 - 3“
322 323 323 324 324
Ɣ13 Ɣ13 Ɣ16 Ɣ13 Ɣ16
Ɣ13 Ɣ13 Ɣ16 Ɣ13 Ɣ16
Ɣ20 Ŷ20 Ŷ23 Ŷ20 Ŷ23
Ɣ16 Ŷ16 Ŷ20 Ŷ16 Ŷ20
Ɣ10 Ɣ10 Ɣ13 Ɣ10 Ɣ13
Ɣ20 Ɣ20 Ɣ23 Ɣ20 Ɣ23
Ɣ13 Ɣ13 Ɣ16 Ɣ13 Ɣ16
Ɣ20 Ɣ20 Ɣ23 Ɣ20 Ɣ23
Ɣ43 Ɣ13 Ɣ16 Ɣ13 Ɣ16
Ɣ36 Ɣ36 Ɣ39 Ɣ36 Ɣ39
Ɣ36 Ɣ36 Ɣ39 Ɣ36 Ɣ39
Ɣ23 Ɣ23 Ɣ26 Ɣ23 Ɣ26
Ɣ13 Ɣ13 Ɣ16 Ɣ13 Ɣ16
1568 1567 1548 1549 1542 1592
327 327 328 328 329 329
Ɣ13 Ɣ13 Ɣ13 Ɣ13 Ɣ13 Ɣ13
Ɣ13 Ɣ13 Ɣ13 Ɣ13 Ɣ13 Ɣ13
Ŷ20 Ŷ20 Ŷ20 Ŷ20 Ŷ20 Ŷ20
Ŷ16 Ŷ16 Ŷ16 Ŷ16 Ŷ16 Ŷ16
Ɣ10 Ɣ10 Ɣ10 Ɣ10 Ɣ10 Ɣ10
Ɣ20 Ɣ20 Ɣ20 Ɣ20 Ɣ20 Ɣ20
Ɣ13 Ɣ13 Ɣ13 Ɣ13 Ɣ13 Ɣ13
Ɣ20 Ɣ20 Ɣ20 Ɣ20 Ɣ20 Ɣ20
Ɣ13 Ɣ13 Ɣ13 Ɣ13 Ɣ13 Ɣ13
Ɣ36 Ɣ36 Ɣ36 Ɣ36 Ɣ36 Ɣ36
Ɣ36 Ɣ36 Ɣ36 Ɣ36 Ɣ36 Ɣ36
Ɣ23 Ɣ23 Ɣ23 Ɣ23 Ɣ23 Ɣ23
Ɣ13 Ɣ13 Ɣ13 Ɣ13 Ɣ13 Ɣ13
E040 E041 E042 E043 E547
330 330 331 331 332-333
Ŷ82 Ŷ82 Ŷ82 Ŷ82 Ɣ23
Ŷ72 Ŷ72 Ŷ72 Ŷ72 Ɣ20
Ŷ59 Ŷ59 Ŷ59 Ŷ59 Ɣ16
Ŷ52 Ŷ52 Ŷ52 Ŷ52 Ɣ13
Ŷ33 Ŷ33 Ŷ33 Ŷ33 Ɣ10
Ɣ16 Ɣ16 Ɣ16
Ɣ23 Ɣ23
Ɣ20 Ɣ20
Ɣ13 Ɣ13
Ɣ49 Ɣ49 Ɣ39
Ɣ26 Ɣ26 Ɣ23
Ɣ49 Ɣ49 Ɣ33
Ɣ26 Ɣ26 Ɣ16
Ɣ33 Ɣ33
Ɣ16 Ɣ16
Ɣ39 Ɣ39
Ɣ16 Ɣ16
Ŷ39 Ɣ13
Ɣ98 Ɣ33
Ŷ66 Ɣ23
Ɣ7
Ŷ52 Ŷ52
Ŷ115 Ŷ115 Ɣ39
Ŷ66 Ŷ66 Ɣ23
Ŷ49 Ŷ49 Ɣ16
Ɣ98 Ɣ98
Ɣ16
Ɣ10
1544 1545 1545A 1546
325 325 326 326
Ɣ13 Ɣ13 Ɣ13 Ɣ13
Ɣ13 Ɣ13 Ɣ13 Ɣ13
Ŷ20 Ŷ20 Ŷ20 Ŷ20
Ŷ16 Ŷ16 Ŷ16 Ŷ16
Ɣ10 Ɣ10 Ɣ10 Ɣ10
Ɣ20 Ɣ20 Ɣ20 Ɣ20
Ɣ13 Ɣ13 Ɣ13 Ɣ13
Ɣ20 Ɣ20 Ɣ20 Ɣ20
Ɣ13 Ɣ13 Ɣ13 Ɣ13
Ɣ36 Ɣ36 Ɣ36 Ɣ36
Ɣ36 Ɣ36 Ɣ36 Ɣ36
Ɣ23 Ɣ23 Ɣ23 Ɣ23
Ɣ13 Ɣ13 Ɣ13 Ɣ13
E550
333
Ɣ72
Ɣ66
Ɣ52
Ɣ39
Ɣ23
Ɣ13
Ɣ23
Ɣ16
Ɣ23
Ŷ39
Ŷ23
Ŷ33
Ŷ16
Ŷ39
Ɣ98
Ɣ66
Ɣ13
Ɣ115
Ɣ66
Ɣ49
Ɣ39
Ɣ23
Surface Feet Per Minute (SFM)
Pipe Taps(con‘t)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Pipe Taps
www.precisiondormer.com 199
Ŷ = Excellent for Application
Ɣ= Good for Application
Surface Feet Per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG) With Examples
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Misc Taps
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Miscellaneous Taps and Dies
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
ŶƔ
Page # for easy reference
Style:
Thread Form:
Flute Form:
Chamfer:
Depth:
Tolerance:
Standard:
Through/Blind Hole:
Direction:
Finish/Coating:
Tool Material:
Coolant:
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the AMG
Chart below.
Use the icons to fi nd Hole Type and other Product Features.
Locate your Best Product Choices and Surface Feet per Minute
(SFM). example 72 72 - SFM
NOTE: Additional cutting charts located
on page 204-210.
Page # for easy reference
www.precisiondormer.com
Tool Brand:
200
1
1
2
2
3
3
2
2
1
1
3
3
4
4
1994 E650, E651 E653
1/16 - 1“
334 335 336
Ɣ82 Ɣ82 Ɣ82
Ɣ72 Ɣ72 Ɣ72
Ɣ59 Ɣ59 Ɣ59
Ɣ49 Ɣ49 Ɣ49
Ɣ26 Ɣ26 Ɣ26
Ɣ98 Ɣ98 Ɣ98
Ɣ66 Ɣ66 Ɣ66
Ɣ59 Ɣ59 Ɣ59
Ɣ115 Ɣ115 Ɣ115
Ɣ98 Ɣ98 Ɣ98
2025,
2325M,
2010
342-
343
Ŷ26
Ŷ23
Ŷ20
Ɣ16
Ɣ13
Ɣ7
Ŷ26
Ŷ23
Ŷ20
Ɣ16
Ɣ7
Ɣ30
Ɣ7
Ɣ7
Ɣ30
Ɣ26
Ɣ23
Ŷ33
Ŷ49
Ŷ49
Ɣ33
Ɣ49
Ɣ33
Ɣ16
See pg 337-338
for these products
2510,
2710M
Threading with Taps
Icon Guide for Taps
Tap Drill Sizes for Metric M-Profi le Screw Threads
Tap Drill Sizes for Forming Taps
Forming Tap Drill Sizes for Self-Locking Threads
Tap Projection and Hole Size for Pipe Taps
Tap Size Recommendations for Classes 2B and 3B
Unifi ed Screw Thread Limits
Tapping Speeds
Tap Technical Charts
202
203
204
205
206
207
208
209
210
www.precisiondormer.com
Tap Technical Charts
201
www.precisiondormer.com
Threading with Taps
202
6-8 x P
4-6 x P
2-3 x P
NO. 1 =
NO. 2 =
NO. 3 =
6-8 x P
3,5-5 x P
NO. 4 =
NO. 5 =
Ø<=M10 Ø<=M12
CHAMFER LENGTHS AND SERIAL TAPS
The fi rst group (No. 1, 2, 3) includes taps with complete thread profi le and the
difference is in the chamfer length.
The second group (No. 4, 5) includes taps with incomplete thread profi le. They
have lower pitch and outer diameter, compared to the complete standard, and
longer chamfer. After using them, a fi nishing tap No. 3 must be used.
Taper
Plug
Bottoming
www.precisiondormer.com 203
Tap Technical Charts
American National Standard Institute
- Standard Tap Blank used in the US
- Fractional Tap Blank Dimensions.
International Organization for Standardization -
Common Tap Blanks used in Great Britain
- Metric Tap Blank Dimensions
(Dormer ISO Standard)
Deutsches Institut fur Normung
- Standard Organization based in Germany
- Metric Tap Blank Dimensions that are normally longer than ISO and
ANSI standard(Dormer DIN Standard)
Spiral
Point Form
Tap Spiral
Flute Through or
Blind Hole CoolantThrough
Hole
Straight
Flute Helix
Angle
Depth
Class
of Fit Parallel
Internal
Thread
Carbide
(Hard Metal)
Taper
Chamfer Plug
Chamfer Semi-
Bottoming
Chamfer
Full
Bottoming
Chamfer
HSCo
Powder
Steel
HSS
Powder
Steel
Hard
Lube Flash
Chrome
Steam
Oxide
Nitride Nitride
Steam
HSS
Cobalt
Chromium
Steel Carbide Zirconium
Nitride
Chromium
Nitride Gold
Icon Guide for Taps
www.precisiondormer.com
Threading with Taps
204
Tap Drill Sizes for Unifi ed Threads
Tap Drill Sizes for Metric M-Profi le Screw Threads
The charts on this page are recommended sizes for cutting taps. Hole
sizes shown may not suit UNJ and MJ hole requirements
www.precisiondormer.com
Tap Technical Charts
205
Tap Drill Sizes for Forming Taps
*Probable percent of full thread produced in tapped hole using
standard drill sizes.
*
www.precisiondormer.com
Threading with Taps
206
Forming Tap Drill Sizes for Self-Locking Threads
www.precisiondormer.com
Tap Technical Charts
207
Tap Projection and Hole Size for Pipe Taps
www.precisiondormer.com
Threading with Taps
208
Tap Size Recommendations for Classes 2B and 3B
www.precisiondormer.com
Tap Technical Charts
209
Unifi ed Screw Thread Limits
*Internal Thread Minor Diameter Tolerances. Internal thread minor diameter tolerances are based on a length of engagement equal to the nominal
diameter. For general applications, these tolerances are suitable for lengths of engagement up to 1-1/2 diameters. However, some thread applications
have lengths of engagement which are greater than 1-1/2 diameters or less than the nominal diameter. For such applications, it may be advantageous
to increase or decrease the tolerance, respectively.
**
**
www.precisiondormer.com
Threading with Taps
210
Tapping Speeds
(Surface Feet Per Minute to Revolutions Per Minute)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 211
www.precisiondormer.com
T100 - T110
T100
Ŷ
Ɣ
MP
mm
d2
Ø
mm
l1
mm
l2
mm
l3
mm a
mm
#
Flutes Stock #
EDP #
or
e-Code
30.50 3.5 56 10 6 2.70 3 2.6 0374214 T100M3
40.70 4.5 63 13 6 3.40 3 3.4 0374221 T100M4
50.80 6 70 16 8 4.90 3 4.3 0374238 T100M5
61.00 6 80 20 8 4.90 3 5.1 0374245 T100M6
81.25 8 90 25 9 6.20 3 6.9 0374252 T100M8
10 1.50 10 100 30 11 8.00 3 8.7 0374269 T100M10
12 1.75 12 110 36 14 9.00 3 10.4 0374276 T100M12
T110
Ŷ
Ɣ
MP
mm
d2
Ø
mm
l1
mm
l2
mm
l3
mm a
mm
#
Flutes Stock #
EDP #
or
e-Code
30.50 3.5 56 10 6 2.70 4 2.6 0374283 T110M3
40.70 4.5 63 13 6 3.40 5 3.4 0374290 T110M4
50.80 6 70 16 8 4.90 5 4.3 0374306 T110M5
61.00 6 80 20 8 4.90 5 5.1 0374313 T110M6
81.25 8 90 25 9 6.20 5 6.9 0374320 T110M8
10 1.50 10 100 30 11 8.00 5 8.7 0374337 T110M10
12 1.75 12 110 36 14 9.00 6 10.4 0374344 T110M12
Ɣ Tarauds machineƔCarbide-Taps ƔMachos de máquina
ƔStraight Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
212 www.precisiondormer.com
E061
Ŷ
Ɣ
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
Inch Stock #
EDP #
or
e-Code
632 2“ 0.5800 0.1410 0.1100 3 H3 36 2.85 0.5800 0348291 E0616-32NO1
632 2“ 0.5800 0.1410 0.1100 3 H3 36 2.85 0.5800 0348307 E0616-32NO2
632 2“ 0.5800 0.1410 0.1100 3 H3 36 2.85 0.5800 0348314 E0616-32NO3
632 2“ 0.5800 0.1410 0.1100 3 H3 36 2.85 0.5800 0348321 E0616-32NO6
832 2.1/8 0.6500 0.1680 0.1310 4 H3 29 3.50 0.6500 0348284 E0618-32NO1
832 2.1/8 0.6500 0.1680 0.1310 4 H3 29 3.50 0.6500 0348338 E0618-32NO2
832 2.1/8 0.6500 0.1680 0.1310 4 H3 29 3.50 0.6500 0348345 E0618-32NO3
832 2.1/8 0.6500 0.1680 0.1310 4 H3 29 3.50 0.6500 0348352 E0618-32NO6
10 24 2.3/8 0.7600 0.1940 0.1520 4 H3 25 3.90 0.7600 0348369 E06110-24NO1
10 24 2.3/8 0.7600 0.1940 0.1520 4 H3 25 3.90 0.7600 0348376 E06110-24NO2
10 24 2.3/8 0.7600 0.1940 0.1520 4 H3 25 3.90 0.7600 0348383 E06110-24NO3
10 24 2.3/8 0.7600 0.1940 0.1520 4 H3 25 3.90 0.7600 0348390 E06110-24NO6
12 24 2.3/8 0.8100 0.2200 0.1650 4 H3 16 4.50 0.8100 0348406 E06112-24NO1
12 24 2.3/8 0.8100 0.2200 0.1650 4 H3 16 4.50 0.8100 0348413 E06112-24NO2
12 24 2.3/8 0.8100 0.2200 0.1650 4 H3 16 4.50 0.8100 0348420 E06112-24NO3
12 24 2.3/8 0.8100 0.2200 0.1650 4 H3 16 4.50 0.8100 0348437 E06112-24NO6
1/4 20 2.1/2 0.6500 0.2550 0.1910 4 H3 7 5.10 1.0630 0348444 E0611/4NO1
1/4 20 2.1/2 0.6500 0.2550 0.1910 4 H3 7 5.10 1.0630 0348451 E0611/4NO2
1/4 20 2.1/2 0.6500 0.2550 0.1910 4 H3 7 5.10 1.0630 0348468 E0611/4NO3
1/4 20 2.1/2 0.6500 0.2550 0.1910 4 H3 7 5.10 1.0630 0348475 E0611/4NO6
5/16 18 2.23/32 0.7700 0.3180 0.2380 4 H3 F 6.60 1.2598 0348482 E0615/16NO1
5/16 18 2.23/32 0.7700 0.3180 0.2380 4 H3 F 6.60 1.2598 0348499 E0615/16NO2
5/16 18 2.23/32 0.7700 0.3180 0.2380 4 H3 F 6.60 1.2598 0348505 E0615/16NO3
5/16 18 2.23/32 0.7700 0.3180 0.2380 4 H3 F 6.60 1.2598 0348512 E0615/16NO6
3/8 16 2.15/16 0.8100 0.3810 0.2860 4 H3 5/16 8.00 1.3780 0348529 E0613/8NO1
3/8 16 2.15/16 0.8100 0.3810 0.2860 4 H3 5/16 8.00 1.3780 0348536 E0613/8NO2
3/8 16 2.15/16 0.8100 0.3810 0.2860 4 H3 5/16 8.00 1.3780 0348543 E0613/8NO3
3/8 16 2.15/16 0.8100 0.3810 0.2860 4 H3 5/16 8.00 1.3780 0348550 E0613/8NO6
7/16 14 3.5/32 0.9055 0.3230 0.2420 4 H3 U 9.40 0348567 E0617/16NO1
7/16 14 3.5/32 0.9055 0.3230 0.2420 4 H3 U 9.40 0348574 E0617/16NO2
7/16 14 3.5/32 0.9055 0.3230 0.2420 4 H3 U 9.40 0348581 E0617/16NO3
7/16 14 3.5/32 0.9055 0.3230 0.2420 4 H3 U 9.40 0348598 E0617/16NO6
1/2 13 3.3/8 0.9055 0.3670 0.2750 4 H3 27/64 10.80 0348604 E0611/2NO1
1/2 13 3.3/8 0.9055 0.3670 0.2750 4 H3 27/64 10.80 0348611 E0611/2NO2
1/2 13 3.3/8 0.9055 0.3670 0.2750 4 H3 27/64 10.80 0348628 E0611/2NO3
1/2 13 3.3/8 0.9055 0.3670 0.2750 4 H3 27/64 10.80 0348635 E0611/2NO6
ƔHand Tap MTT
ƔFor use in a wide variety of materials and
appropriate in either through or blind hole
applications
Ɣ MTT - Tarauds à main ƔMTT Machos de mano
Sizes up to 1” - Gold Finish
1” and larger - Bright Finish
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 213
www.precisiondormer.com
E061
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
Inch Stock #
EDP #
or
e-Code
9/16 12 3.19/32 0.9843 0.4290 0.3220 4 H3 27/64 12.20 0351833 E0619/16NO1
9/16 12 3.19/32 0.9843 0.4290 0.3220 4 H3 31/64 12.20 0348642 E0619/16NO2
9/16 12 3.19/32 0.9843 0.4290 0.3220 4 H3 31/64 12.20 0348659 E0619/16NO3
9/16 12 3.19/32 0.9843 0.4290 0.3220 4 H3 31/64 12.20 0348666 E0619/16NO6
5/8 11 3.13/16 0.9843 0.4800 0.3600 4 H3 17/32 13.50 0348673 E0615/8NO1
5/8 11 3.13/16 0.9843 0.4800 0.3600 4 H3 17/32 13.50 0348680 E0615/8NO2
5/8 11 3.13/16 0.9843 0.4800 0.3600 4 H3 17/32 13.50 0348697 E0615/8NO3
5/8 11 3.13/16 0.9843 0.4800 0.3600 4 H3 17/32 13.50 0348703 E0615/8NO6
3/4 10 4.1/4 1.1811 0.5900 0.4420 4 H3 21/32 16.50 0348710 E0613/4NO1
3/4 10 4.1/4 1.1811 0.5900 0.4420 4 H3 21/32 16.50 0348727 E0613/4NO2
3/4 10 4.1/4 1.1811 0.5900 0.4420 4 H3 21/32 16.50 0348734 E0613/4NO3
3/4 10 4.1/4 1.1811 0.5900 0.4420 4 H3 21/32 16.50 0348741 E0613/4NO6
7/8 9 4.11/16 1.1811 0.6970 0.5230 4 H4 49/64 19.50 0348758 E0617/8NO1
7/8 9 4.11/16 1.1811 0.6970 0.5230 4 H4 49/64 19.50 0348765 E0617/8NO2
7/8 9 4.11/16 1.1811 0.6970 0.5230 4 H4 49/64 19.50 0348772 E0617/8NO3
7/8 9 4.11/16 1.1811 0.6970 0.5230 4 H4 49/64 19.50 0348789 E0617/8NO6
1“ 8 5.1/8 1.4173 0.8000 0.6000 4 H4 7/8 22.25 0348796 E0611NO1
1“ 8 5.1/8 1.4173 0.8000 0.6000 4 H4 7/8 22.25 0348802 E0611NO2
1“ 8 5.1/8 1.4173 0.8000 0.6000 4 H4 7/8 22.25 0348819 E0611NO3
1“ 8 5.1/8 1.4173 0.8000 0.6000 4 H4 7/8 22.25 0348826 E0611NO6
1.1/8 7 5.7/16 1.3976 0.8950 0.6710 4 H4 63/64 25.00 0388112 E0611.1/8NO1
1.1/8 7 5.7/16 1.3976 0.8950 0.6710 4 H4 63/64 25.00 0388129 E0611.1/8NO2
1.1/8 7 5.7/16 1.3976 0.8950 0.6710 4 H4 63/64 25.00 0388136 E0611.1/8NO3
1.1/4 7 5.3/4 1.6338 1.0210 0.7650 4 H4 1.7/64 28.00 0388143 E0611.1/4NO1
1.1/4 7 5.3/4 1.6338 1.0210 0.7650 4 H4 1.7/64 28.00 0388150 E0611.1/4NO2
1.1/4 7 5.3/4 1.6338 1.0210 0.7650 4 H4 1.7/64 28.00 0388167 E0611.1/4NO3
1.3/8 6 6.1/16 1.8700 1.1090 0.8300 4 H4 1.7/32 30.75 0388174 E0611.3/8NO1
1.3/8 6 6.1/16 1.8700 1.1090 0.8300 4 H4 1.7/32 30.75 0388181 E0611.3/8NO2
1.3/8 6 6.1/16 1.8700 1.1090 0.8300 4 H4 1.7/32 30.75 0388198 E0611.3/8NO3
1.1/2 6 6.3/8 1.8700 1.2330 0.9520 4 H4 1.11/32 34.00 0388204 E0611.1/2NO1
1.1/2 6 6.3/8 1.8700 1.2330 0.9520 4 H4 1.11/32 34.00 0388211 E0611.1/2NO2
1.1/2 6 6.3/8 1.8700 1.2330 0.9520 4 H4 1.11/32 34.00 0388228 E0611.1/2NO3
ƔHand Tap MTT
ƔFor use in a wide variety of materials and
appropriate in either through or blind hole
applications
Ɣ MTT - Tarauds à main ƔMTT Machos de mano
Sizes up to 1” - Gold Finish
1” and larger - Bright Finish
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
214 www.precisiondormer.com
E071
Ŷ
Ɣ
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
Inch Stock #
EDP #
or
e-Code
640 2“ 0.5800 0.1410 0.1100 3 H2 33 2.90 0.5800 0349427 E0716-40NO1
640 2“ 0.5800 0.1410 0.1100 3 H2 33 2.90 0.5800 0349434 E0716-40NO2
640 2“ 0.5800 0.1410 0.1100 3 H2 33 2.90 0.5800 0349441 E0716-40NO3
640 2“ 0.5800 0.1410 0.1100 3 H2 33 2.90 0.5800 0349458 E0716-40NO6
836 2.1/8 0.6500 0.1680 0.1310 4 H2 29 3.50 0.6500 0349465 E0718-36NO1
836 2.1/8 0.6500 0.1680 0.1310 4 H2 29 3.50 0.6500 0349472 E0718-36NO2
836 2.1/8 0.6500 0.1680 0.1310 4 H2 29 3.50 0.6500 0349489 E0718-36NO3
836 2.1/8 0.6500 0.1680 0.1310 4 H2 29 3.50 0.6500 0349496 E0718-36NO6
10 32 2.3/8 0.7600 0.1940 0.1520 4 H3 21 4.10 0.7600 0349502 E07110-32NO1
10 32 2.3/8 0.7600 0.1940 0.1520 4 H3 21 4.10 0.7600 0349519 E07110-32NO2
10 32 2.3/8 0.7600 0.1940 0.1520 4 H3 21 4.10 0.7600 0349526 E07110-32NO3
10 32 2.3/8 0.7600 0.1940 0.1520 4 H3 21 4.10 0.7600 0349533 E07110-32NO6
12 28 2.3/8 0.8100 0.2200 0.1650 4 H3 15 4.70 0.8100 0349540 E07112-28NO1
12 28 2.3/8 0.8100 0.2200 0.1650 4 H3 15 4.70 0.8100 0349557 E07112-28NO2
12 28 2.3/8 0.8100 0.2200 0.1650 4 H3 15 4.70 0.8100 0349564 E07112-28NO3
12 28 2.3/8 0.8100 0.2200 0.1650 4 H3 15 4.70 0.8100 0349571 E07112-28NO6
1/4 28 2.1/2 0.6500 0.2550 0.1910 4 H3 3 5.50 1.0630 0349588 E0711/4NO1
1/4 28 2.1/2 0.6500 0.2550 0.1910 4 H3 3 5.50 1.0630 0349595 E0711/4NO2
1/4 28 2.1/2 0.6500 0.2550 0.1910 4 H3 3 5.50 1.0630 0349601 E0711/4NO3
1/4 28 2.1/2 0.6500 0.2550 0.1910 4 H3 3 5.50 1.0630 0349618 E0711/4NO6
5/16 24 2.23/32 0.7700 0.3180 0.2380 4 H3 I 6.90 1.2598 0349625 E0715/16NO1
5/16 24 2.23/32 0.7700 0.3180 0.2380 4 H3 I 6.90 1.2598 0349632 E0715/16NO2
5/16 24 2.23/32 0.7700 0.3180 0.2380 4 H3 I 6.90 1.2598 0349649 E0715/16NO3
5/16 24 2.23/32 0.7700 0.3180 0.2380 4 H3 I 6.90 1.2598 0349656 E0715/16NO6
3/8 24 2.15/16 0.8100 0.3810 0.2860 4 H3 Q 8.50 1.3780 0349663 E0713/8NO1
3/8 24 2.15/16 0.8100 0.3810 0.2860 4 H3 Q 8.50 1.3780 0349670 E0713/8NO2
3/8 24 2.15/16 0.8100 0.3810 0.2860 4 H3 Q 8.50 1.3780 0349687 E0713/8NO3
3/8 24 2.15/16 0.8100 0.3810 0.2860 4 H3 Q 8.50 1.3780 0349694 E0713/8NO6
7/16 20 3.5/32 0.9055 0.3230 0.2420 4 H3 25/64 9.90 0349700 E0717/16NO1
7/16 20 3.5/32 0.9055 0.3230 0.2420 4 H3 25/64 9.90 0349717 E0717/16NO2
7/16 20 3.5/32 0.9055 0.3230 0.2420 4 H3 25/640 9.90 0349724 E0717/16NO3
7/16 20 3.5/32 0.9055 0.3230 0.2420 4 H3 25/64 9.90 0349731 E0717/16NO6
1/2 20 3.3/8 0.9055 0.3670 0.2750 4 H3 29/64 11.50 0349748 E0711/2NO1
1/2 20 3.3/8 0.9055 0.3670 0.2750 4 H3 29/64 11.50 0349755 E0711/2NO2
1/2 20 3.3/8 0.9055 0.3670 0.2750 4 H3 29/64 11.50 0349762 E0711/2NO3
1/2 20 3.3/8 0.9055 0.3670 0.2750 4 H3 29/64 11.50 0349779 E0711/2NO6
ƔHand Tap MTT
ƔFor use in a wide variety of materials and
appropriate in either through or blind hole
applications
Ɣ MTT - Tarauds à main ƔMTT Machos de mano
Sizes up to 1” - Gold Finish
1” and larger - Bright Finish
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 215
www.precisiondormer.com
E071
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits Stock #
EDP #
or
e-Code
9/16 18 3.19/32 0.9843 0.4290 0.3220 4 H3 33/64 12.90 0349786 E0719/16NO1
9/16 18 3.19/32 0.9843 0.4290 0.3220 4 H3 22/64 12.90 0349793 E0719/16NO2
9/16 18 3.19/32 0.9843 0.4290 0.3220 4 H3 33/64 12.90 0349809 E0719/16NO3
9/16 18 3.19/32 0.9843 0.4290 0.3220 4 H3 33/64 12.90 0349816 E0719/16NO6
5/8 18 3.13/16 0.9843 0.4800 0.3600 4 H3 37/64 14.50 0349823 E0715/8NO1
5/8 18 3.13/16 0.9843 0.4800 0.3600 4 H3 37/64 14.50 0349830 E0715/8NO2
5/8 18 3.13/16 0.9843 0.4800 0.3600 4 H3 37/64 14.50 0349847 E0715/8NO3
5/8 18 3.13/16 0.9843 0.4800 0.3600 4 H3 37/64 14.50 0349854 E0715/8NO6
3/4 16 4.1/4 1.1811 0.5900 0.4420 4 H3 11/16 17.50 0349861 E0713/4NO1
3/4 16 4.1/4 1.1811 0.5900 0.4420 4 H3 11/16 17.50 0349878 E0713/4NO2
3/4 16 4.1/4 1.1811 0.5900 0.4420 4 H3 11/16 17.50 0349885 E0713/4NO3
3/4 16 4.1/4 1.1811 0.5900 0.4420 4 H3 11/16 17.50 0351932 E0713/4NO6
7/8 14 4.11/16 1.1811 0.6970 0.5230 4 H4 13/16 20.40 0349892 E0717/8NO1
7/8 14 4.11/16 1.1811 0.6970 0.5230 4 H4 13/16 20.40 0349908 E0717/8NO2
7/8 14 4.11/16 1.1811 0.6970 0.5230 4 H4 13/16 20.40 0349915 E0717/8NO3
7/8 14 4.11/16 1.1811 0.6970 0.5230 4 H4 13/16 20.40 0349922 E0717/8NO6
1“ 12 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.25 0349939 E0711X12NO1
1“ 12 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.50 0349946 E0711X12NO2
112 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.25 0349953 E0711X12NO3
1“ 12 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.25 0349960 E0711X12NO6
1“ 14 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.25 0349977 E0711X14NO1
1“ 14 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.50 0349984 E0711X14NO2
114 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.50 0349991 E0711X14NO3
1“ 14 5.1/8 1.4173 0.8000 0.6000 4 H4 59/64 23.50 0350003 E0711X14NO6
1.1/8 12 5.7/16 2.1654 0.8950 0.6710 4 H4 1.3/64 26.50 0388235 E0711.1/8NO1
1.1/8 12 5.7/16 2.1654 0.8950 0.6710 4 H4 1.3/64 26.50 0388242 E0711.1/8NO2
1.1/8 12 5.7/16 2.1654 0.8950 0.6710 4 H4 1.3/64 26.50 0388259 E0711.1/8NO3
1.1/4 12 5.3/4 2.1654 1.0210 0.7650 4 H4 1.5/32 29.50 0388266 E0711.1/4NO1
1.1/4 12 5.3/4 2.1654 1.0210 0.7650 4 H4 1.5/32 29.50 0388273 E0711.1/4NO2
1.1/4 12 5.3/4 2.1654 1.0210 0.7650 4 H4 1.5/32 29.50 0388280 E0711.1/4NO3
1.3/8 12 6.1/16 2.5591 1.1090 0.8300 4 H4 1.9/32 32.75 0388297 E0711.3/8NO1
1.3/8 12 6.1/16 2.5591 1.1090 0.8300 4 H4 1.9/32 32.75 0388303 E0711.3/8NO2
1.3/8 12 6.1/16 2.5591 1.1090 0.8300 4 H4 1.9/32 32.75 0388310 E0711.3/8NO3
1.1/2 12 6.3/8 2.5591 1.2330 0.9250 4 H4 1.27/64 36.00 0388327 E0711.1/2NO1
1.1/2 12 6.3/8 2.5591 1.2330 0.9250 4 H4 1.27/64 36.00 0388334 E0711.1/2NO2
1.1/2 12 6.3/8 2.5591 1.2330 0.9250 4 H4 1.27/64 36.00 0388341 E0711.1/2NO3
ƔHand Tap MTT
ƔFor use in a wide variety of materials and
appropriate in either through or blind hole
applications
Ɣ MTT - Tarauds à main ƔMTT Machos de mano
Sizes up to 1” - Gold Finish
1” and larger - Bright Finish
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
216 www.precisiondormer.com
1528(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
164 1.11/16 3/8 0.141 0.110 3/16 2 H1 B 1010601
164 1.11/16 3/8 0.141 0.110 3/16 2 H1 P 1010599
164 1.11/16 3/8 0.141 0.110 3/16 2 H1 T 1010598
164 1.11/16 3/8 0.141 0.110 3/16 2 H2 P 1010600
256 1.3/4 7/16 0.141 0.110 3/16 2 H1 P 1010614
256 1.3/4 7/16 0.141 0.110 3/16 3 H1 B 1010612
256 1.3/4 7/16 0.141 0.110 3/16 3 H1 P 1010610
256 1.3/4 7/16 0.141 0.110 3/16 3 H1 T 1010608
256 1.3/4 7/16 0.141 0.110 3/16 2 H2 B 1010617
256 1.3/4 7/16 0.141 0.110 3/16 2 H2 P 1010615
256 1.3/4 7/16 0.141 0.110 3/16 3 H2 B 1010613
256 1.3/4 7/16 0.141 0.110 3/16 3 H2 P 1010611
256 1.3/4 7/16 0.141 0.110 3/16 3 H2 T 1010609
348 1.13/16 1/2 0.141 0.110 3/16 3 H1 P 1010626
348 1.13/16 1/2 0.141 0.110 3/16 2 H2 P 1010631
348 1.13/16 1/2 0.141 0.110 3/16 3 H2 B 1010629
348 1.13/16 1/2 0.141 0.110 3/16 3 H2 P 1010627
348 1.13/16 1/2 0.141 0.110 3/16 3 H2 T 1010625
440 1.7/8 9/16 0.141 0.110 3/16 2 H1 P 1010649
440 1.7/8 9/16 0.141 0.110 3/16 3 H1 B 1010647
440 1.7/8 9/16 0.141 0.110 3/16 3 H1 P 1010645
440 1.7/8 9/16 0.141 0.110 3/16 3 H1 T 1010643
440 1.7/8 9/16 0.141 0.110 3/16 2 H2 B 1010652
440 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 1010650
440 1.7/8 9/16 0.141 0.110 3/16 3 H2 B 1010648
440 1.7/8 9/16 0.141 0.110 3/16 3 H2 P 1010646
440 1.7/8 9/16 0.141 0.110 3/16 3 H2 T 1010644
540 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 1010666
540 1.15/16 5/8 0.141 0.110 3/16 3 H2 T 1010660
540 1.15/16 5/8 0.141 0.110 3/16 3 H2 B 1010664
540 1.15/16 5/8 0.141 0.110 3/16 3 H2 P 1010662
632 2“ 11/16 0.141 0.110 3/16 2 H1 P 1010684
632 2“ 11/16 0.141 0.110 3/16 3 H1 B 1010681
632 2“ 11/16 0.141 0.110 3/16 3 H1 P 1010678
632 2“ 11/16 0.141 0.110 3/16 3 H1 T 1010675
632 2“ 11/16 0.141 0.110 3/16 2 H2 B 1010688
632 2“ 11/16 0.141 0.110 3/16 2 H2 P 1010685
632 2“ 11/16 0.141 0.110 3/16 3 H2 B 1010682
632 2“ 11/16 0.141 0.110 3/16 3 H2 P 1010679
632 2“ 11/16 0.141 0.110 3/16 3 H2 T 1010676
Ɣ
Ɣ Tarauds à mainƔHand Tap ƔMachos de mano
ƔFor use in a wide variety of materials
and appropriate in either through or
blind hole applications
ƔMachine Screw Sizes
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 217
www.precisiondormer.com
1528(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
632 2“ 11/16 0.141 0.110 3/16 2 H3 B 1010689
632 2“ 11/16 0.141 0.110 3/16 2 H3 P 1010686
632 2“ 11/16 0.141 0.110 3/16 3 H3 B 1010683
632 2“ 11/16 0.141 0.110 3/16 3 H3 P 1010680
632 2“ 11/16 0.141 0.110 3/16 3 H3 T 1010677
832 2.1/8 3/4 0.168 0.131 1/4 4 H1 P 1010699
832 2.1/8 3/4 0.168 0.131 1/4 2 H2 B 1010709
832 2.1/8 3/4 0.168 0.131 1/4 2 H2 P 1010706
832 2.1/8 3/4 0.168 0.131 1/4 3 H2 B 1010715
832 2.1/8 3/4 0.168 0.131 1/4 3 H2 P 1010712
832 2.1/8 3/4 0.168 0.131 1/4 4 H2 B 1010703
832 2.1/8 3/4 0.168 0.131 1/4 4 H2 P 1010700
832 2.1/8 3/4 0.168 0.131 1/4 4 H2 T 1010697
832 2.1/8 3/4 0.168 0.131 1/4 2 H3 B 1010710
832 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 1010707
832 2.1/8 3/4 0.168 0.131 1/4 3 H3 B 1010716
832 2.1/8 3/4 0.168 0.131 1/4 3 H3 P 1010713
832 2.1/8 3/4 0.168 0.131 1/4 4 H3 B 1010704
832 2.1/8 3/4 0.168 0.131 1/4 4 H3 P 1010701
832 2.1/8 3/4 0.168 0.131 1/4 4 H3 T 1010698
10 24 2.3/8 7/8 0.194 0.152 1/4 3 H1 P 1010738
10 24 2.3/8 7/8 0.194 0.152 1/4 4 H1 P 1010726
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H2 B 1010736
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 1010733
10 24 2.3/8 7/8 0.194 0.152 1/4 3 H2 P 1010739
10 24 2.3/8 7/8 0.194 0.152 1/4 4 H2 B 1010730
10 24 2.3/8 7/8 0.194 0.152 1/4 4 H2 P 1010727
10 24 2.3/8 7/8 0.194 0.152 1/4 4 H2 T 1010724
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 1010737
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 1010734
10 24 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 1010743
10 24 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 1010740
10 24 2.3/8 7/8 0.194 0.152 1/4 4 H3 B 1010731
10 24 2.3/8 7/8 0.194 0.152 1/4 4 H3 P 1010728
10 24 2.3/8 7/8 0.194 0.152 1/4 4 H3 T 1010725
12 24 2.3/8 15/16 0.220 0.165 9/32 4 H3 B 1010768
12 24 2.3/8 15/16 0.220 0.165 9/32 4 H3 P 1010767
12 24 2.3/8 15/16 0.220 0.165 9/32 4 H3 T 1010765
Ɣ Tarauds à mainƔHand Tap ƔMachos de mano
ƔFor use in a wide variety of materials
and appropriate in either through or
blind hole applications
ƔMachine Screw Sizes
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
218 www.precisiondormer.com
1528(UNF) - 1528(UNS)
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
080 1.5/8 5/16 0.141 0.110 3/16 2 H1 B 1010596
080 1.5/8 5/16 0.141 0.110 3/16 2 H1 P 1010594
080 1.5/8 5/16 0.141 0.110 3/16 2 H1 T 1010593
080 1.5/8 5/16 0.141 0.110 3/16 2 H2 B 1010597
080 1.5/8 5/16 0.141 0.110 3/16 2 H2 P 1010595
172 1.11/16 3/8 0.141 0.110 3/16 2 H1 B 1010606
172 1.11/16 3/8 0.141 0.110 3/16 2 H1 P 1010604
172 1.11/16 3/8 0.141 0.110 3/16 2 H1 T 1010603
172 1.11/16 3/8 0.141 0.110 3/16 2 H2 B 1010607
172 1.11/16 3/8 0.141 0.110 3/16 2 H2 P 1010605
264 1.3/4 7/16 0.141 0.110 3/16 3 H2 B 1010621
264 1.3/4 7/16 0.141 0.110 3/16 3 H2 P 1010620
264 1.3/4 7/16 0.141 0.110 3/16 3 H2 T 1010618
356 1.13/16 1/2 0.141 0.110 3/16 3 H2 B 1010637
356 1.13/16 1/2 0.141 0.110 3/16 3 H2 P 1010636
356 1.13/16 1/2 0.141 0.110 3/16 3 H2 T 1010634
448 1.7/8 9/16 0.141 0.110 3/16 3 H2 B 1010656
448 1.7/8 9/16 0.141 0.110 3/16 3 H2 P 1010655
448 1.7/8 9/16 0.141 0.110 3/16 3 H2 T 1010653
544 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 1010673
544 1.15/16 5/8 0.141 0.110 3/16 3 H2 B 1010672
544 1.15/16 5/8 0.141 0.110 3/16 3 H2 P 1010671
544 1.15/16 5/8 0.141 0.110 3/16 3 H2 T 1010669
640 2“ 11/16 0.141 0.110 3/16 2 H2 P 1010694
640 2“ 11/16 0.141 0.110 3/16 3 H2 B 1010693
640 2“ 11/16 0.141 0.110 3/16 3 H2 P 1010692
640 2“ 11/16 0.141 0.110 3/16 3 H2 T 1010690
836 2.1/8 3/4 0.168 0.131 1/4 4 H2 B 1010720
836 2.1/8 3/4 0.168 0.131 1/4 4 H2 P 1010719
836 2.1/8 3/4 0.168 0.131 1/4 4 H2 T 1010717
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H1 P 1010753
10 32 2.3/8 7/8 0.194 0.152 1/4 4 H1 P 1010747
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 B 1010757
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 1010754
10 32 2.3/8 7/8 0.194 0.152 1/4 3 H2 B 1010763
10 32 2.3/8 7/8 0.194 0.152 1/4 3 H2 P 1010760
10 32 2.3/8 7/8 0.194 0.152 1/4 4 H2 B 1010751
10 32 2.3/8 7/8 0.194 0.152 1/4 4 H2 P 1010748
10 32 2.3/8 7/8 0.194 0.152 1/4 4 H2 T 1010745
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 1010758
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 1010755
10 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 1010764
10 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 1010761
10 32 2.3/8 7/8 0.194 0.152 1/4 4 H3 B 1010752
10 32 2.3/8 7/8 0.194 0.152 1/4 4 H3 P 1010749
10 32 2.3/8 7/8 0.194 0.152 1/4 4 H3 T 1010746
12 28 2.3/8 15/16 0.220 0.165 9/32 4 H3 B 1010772
12 28 2.3/8 15/16 0.220 0.165 9/32 4 H3 P 1010771
12 28 2.3/8 15/16 0.220 0.165 9/32 4 H3 T 1010769
1528(UNS)
UNS TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
436 1.7/8 9/16 0.141 0.110 3/16 3 H2 B 1010642
436 1.7/8 9/16 0.141 0.110 3/16 3 H2 P 1010641
436 1.7/8 9/16 0.141 0.110 3/16 3 H2 T 1010640
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 219
www.precisiondormer.com
1528S(UNC) - (UNF) - (UNS)
UNC TPI
l1
Inch
l2
Inch
l3
Inch
d2
Ø
Inch a
Inch
#
Flutes Limits
EDP #
or
e-Code
164 1.11/16 3/8 3/16 .1410 .1100 2 H1 1011000
256 1.3/4 7/16 3/16 .1410 .1100 3 H2 1011003
348 1.13/16 1/2 3/16 .1410 .1100 3 H2 1011005
440 1.7/8 9/16 3/16 .1410 .1100 3 H2 1011008
540 1.15/16 5/8 3/16 .1410 .1100 3 H2 1011010
632 2“ 11/16 3/16 .1410 .1100 3 H2 1011012
632 2“ 11/16 3/16 .1410 .1100 3 H3 1011013
832 2.1/8 3/4 1/4 .1680 .1310 4 H2 1011016
832 2.1/8 3/4 1/4 .1680 .1310 4 H3 1011017
10 24 2.3/8 7/8 1/4 .1940 .1520 4 H2 1011020
10 24 2.3/8 7/8 1/4 .1940 .1520 4 H3 1011021
12 24 2.3/8 15/16 9/32 .2200 .1650 4 H3 1011025
1528S(UNF)
UNF TPI
l1
Inch
l2
Inch
l3
Inch
d2
Ø
Inch a
Inch
#
Flutes Limits
EDP #
or
e-Code
080 1.5/8 5/16 3/16 .1410 .1100 2 H1 1010999
172 1.11/16 3/8 3/16 .1410 .1100 2 H1 1011001
264 1.3/4 7/16 3/16 .1410 .1100 3 H2 1011073
356 1.13/16 1/2 3/16 .1410 .1100 3 H2 1011074
448 1.7/8 9/16 3/16 .1410 .1100 3 H2 1011075
544 1.15/16 5/8 3/16 .1410 .1100 3 H2 1011076
640 2“ 11/16 3/16 .1410 .1100 3 H2 1011014
836 2.1/8 3/4 1/4 .1680 .1310 4 H2 1011018
10 32 2.3/8 7/8 1/4 .1940 .1520 4 H2 1011023
10 32 2.3/8 7/8 1/4 .1940 .1520 4 H3 1011024
12 28 2.3/8 15/16 9/32 .2200 .1650 4 H3 1011026
1528S(UNS)
UNS TPI
l1
Inch
l2
Inch
l3
Inch
d2
Ø
Inch a
Inch
#
Flutes Limits
EDP #
or
e-Code
436 1.7/8 9/16 3/16 .1410 .1100 3 H2 1011006
ƔHand Tap, Set of 3 pcs
ƔSet includes taper, plug, and
bottoming tap
Ɣ Tarauds à main - Jeu de 3 ƔMachos de mano, Juego de 3 piezas
1528S(UNF)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
220 www.precisiondormer.com
1500(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H1 B 1010008
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H1 P 1010004
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H1 T 1010001
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H2 B 1010009
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H2 P 1010005
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H2 T 1010002
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H3 B 1010010
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H3 P 1010006
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H3 T 1010003
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H5 B 1010011
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H5 P 1010007
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H2 B 1010031
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H2 P 1010027
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H2 T 1010024
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 B 1010032
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 1010028
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 T 1010025
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H5 B 1010033
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H5 P 1010029
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H2 B 1010053
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H2 P 1010049
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H2 T 1010046
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 B 1010054
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 1010050
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 T 1010047
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H5 B 1010055
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H5 P 1010051
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H2 P 1010069
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 B 1010074
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 1010070
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 T 1010067
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 B 1010075
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 P 1010071
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H2 B 1010091
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H2 P 1010087
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 B 1010092
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 1010088
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 T 1010085
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 B 1010093
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 P 1010089
Ɣ
ƔHand Tap
ƔFor use in a wide variety of materials and
appropriate in either through or blind hole
applications
Ɣ Tarauds à main ƔMachos de mano
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 221
www.precisiondormer.com
1500(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
9/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 B 1010108
9/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 1010106
9/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 T 1010103
9/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H5 P 1010107
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H2 P 1010120
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 B 1010123
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 1010121
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 T 1010118
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 B 1010124
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 P 1010122
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H2 P 1010141
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 B 1010144
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 1010142
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 T 1010139
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H5 B 1010145
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H5 P 1010143
7/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 B 1010159
7/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 1010157
7/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 T 1010154
7/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H6 P 1010158
1“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H2 P 1010169
1“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 B 1010172
1“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 1010170
1“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 T 1010167
1“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H6 P 1010171
1.1/8 7 5.7/16 2.9/16 0.896 0.672 7/8 4 H4 B 1010184
1.1/8 7 5.7/16 2.9/16 0.896 0.672 7/8 4 H4 P 1010183
1.1/8 7 5.7/16 2.9/16 0.896 0.672 7/8 4 H4 T 1010182
1.1/8 7 5.7/16 2.9/16 0.896 0.672 7/8 4 H9 P 1013131
1.1/4 7 5.3/4 2.9/16 1.021 0.766 1“ 4 H4 B 1010190
1.1/4 7 5.3/4 2.9/16 1.021 0.766 1“ 4 H4 P 1010189
1.1/4 7 5.3/4 2.9/16 1.021 0.766 1“ 4 H4 T 1010188
1.1/4 7 5.3/4 2.9/16 1.021 0.766 1“ 4 H9 P 1013155
1.3/8 6 6.1/16 3“ 1.100 0.831 1.1/16 4 H10 P 1013180
1.3/8 6 6.1/16 3“ 1.100 0.831 1.1/16 4 H4 B 1010196
1.3/8 6 6.1/16 3“ 1.100 0.831 1.1/16 4 H4 P 1010195
1.3/8 6 6.1/16 3“ 1.100 0.831 1.1/16 4 H4 T 1010194
1.1/2 6 6.3/8 3“ 1.230 0.925 1.1/8 4 H10 P 1013204
1.1/2 6 6.3/8 3“ 1.230 0.925 1.1/8 4 H4 B 1010202
1.1/2 6 6.3/8 3“ 1.230 0.925 1.1/8 4 H4 P 1010201
1.1/2 6 6.3/8 3“ 1.230 0.925 1.1/8 4 H4 T 1010200
ƔHand Tap
ƔFor use in a wide variety of materials and
appropriate in either through or blind hole
applications
Ɣ Tarauds à main ƔMachos de mano
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
222 www.precisiondormer.com
1500(UNF)
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H1 B 1010019
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H1 P 1010015
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H2 B 1010020
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H2 P 1010016
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H3 B 1010021
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H3 P 1010017
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H3 T 1010014
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H4 B 1010022
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H4 P 1010018
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H1 B 1010041
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H2 B 1010042
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H2 P 1010038
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 B 1010043
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 1010039
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 T 1010036
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H4 B 1010044
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H4 P 1010040
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H2 B 1010064
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H2 P 1010060
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 B 1010065
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 1010061
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 T 1010058
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H4 B 1010066
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H4 P 1010062
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H2 P 1010078
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 B 1010083
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 1010079
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 T 1010076
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 B 1010084
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 P 1010080
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H2 P 1010096
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 B 1010101
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 1010097
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 T 1010094
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 B 1010102
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 P 1010098
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H2 P 1010112
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 B 1010116
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 1010113
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 T 1010110
Ɣ
ƔHand Tap
ƔFor use in a wide variety of materials and
appropriate in either through or blind hole
applications
Ɣ Tarauds à main ƔMachos de mano
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 223
www.precisiondormer.com
1500(UNF) - (UNS)
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H5 B 1010117
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H5 P 1010114
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H2 P 1010127
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 B 1010131
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 1010128
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 T 1010125
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 B 1010132
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 P 1010129
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H2 P 1010148
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 B 1010152
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 1010149
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 T 1010146
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H5 B 1010153
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H5 P 1010150
7/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H2 P 1010162
7/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 B 1010166
7/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 1010163
7/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 T 1010160
7/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H6 P 1010164
1“ 12 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 B 1010175
1“ 12 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 1010174
1“ 12 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 T 1010173
1“ 12 5.1/8 2.1/2 0.800 0.600 13/16 4 H7 P 1013105
1.1/8 12 5.7/16 2.9/16 0.896 0.672 7/8 4 H4 B 1010187
1.1/8 12 5.7/16 2.9/16 0.896 0.672 7/8 4 H4 P 1010186
1.1/8 12 5.7/16 2.9/16 0.896 0.672 7/8 4 H4 T 1010185
1.1/8 12 5.7/16 2.9/16 0.896 0.672 7/8 4 H7 P 1013141
1.1/4 12 5.3/4 2.9/16 1.021 0.766 1“ 6 H4 B 1010193
1.1/4 12 5.3/4 2.9/16 1.021 0.766 1“ 6 H4 P 1010192
1.1/4 12 5.3/4 2.9/16 1.021 0.766 1“ 6 H4 T 1010191
1.1/4 12 5.3/4 2.9/16 1.021 0.766 1“ 4 H8 P 1013166
1.3/8 12 6.1/16 3“ 1.100 0.831 1.1/16 6 H4 B 1010199
1.3/8 12 6.1/16 3“ 1.100 0.831 1.1/16 6 H4 P 1010198
1.3/8 12 6.1/16 3“ 1.100 0.831 1.1/16 6 H4 T 1010197
1.3/8 12 6.1/16 3“ 1.100 0.831 1.1/16 4 H8 P 1013190
1.1/2 12 6.3/8 3“ 1.230 0.925 1.1/8 6 H4 B 1010205
1.1/2 12 6.3/8 3“ 1.230 0.925 1.1/8 6 H4 P 1010204
1.1/2 12 6.3/8 3“ 1.230 0.925 1.1/8 6 H4 T 1010203
1.1/2 12 6.3/8 3“ 1.230 0.925 1.1/8 6 H8 P 1013214
1500(UNS)
UNS TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1“ 14 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 B 1010181
1“ 14 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 1010178
1“ 14 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 T 1010176
11/16 11 4.1/32 1.13/16 0.542 0.406 5/8 4 H3 T 1010133
11/16 11 4.1/32 1.13/16 0.542 0.406 5/8 4 H3 P 1010134
11/16 11 4.1/32 1.13/16 0.542 0.406 5/8 4 H3 B 1010135
11/16 16 4.1/32 1.13/16 0.542 0.406 5/8 4 H3 T 1010136
11/16 16 4.1/32 1.13/16 0.542 0.406 5/8 4 H3 P 1010137
11/16 16 4.1/32 1.13/16 0.542 0.406 5/8 4 H3 B 1010138
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
224 www.precisiondormer.com
1500S(UNC) (UNF) (UNS)
UNC TPI
l1
Inch
l2
Inch
l3
Inch
d2
Ø
Inch a
Inch
#
Flutes Limits
EDP #
or
e-Code
1/4 20 2.1/2 1“ 5/16 0.2550 0.1910 4 H3 1011029
5/16 18 2.23/32 1.1/8 3/8 0.3180 0.2380 4 H3 1011035
3/8 16 2.15/16 1.1/4 7/16 0.3810 0.2860 4 H3 1011041
7/16 14 3.5/32 1.7/16 13/32 0.3230 0.2420 4 H3 1011045
1/2 13 3.3/8 1.21/32 7/16 0.3670 0.2750 4 H3 1011047
9/16 12 3.19/32 1.21/32 1/2 0.4290 0.3220 4 H3 1011049
5/8 11 3.13/16 1.13/16 9/16 0.4800 0.3600 4 H3 1011051
3/4 10 4.1/4 2“ 11/16 0.5900 0.4420 4 H3 1011055
7/8 9 4.11/16 2.7/32 3/4 0.6970 0.5230 4 H4 1011057
1“ 8 5.1/8 2.1/2 13/16 0.8000 0.6000 4 H4 1011059
1.1/8 7 5.7/16 2.9/16 7/8 0.8960 0.6720 4 H4 1011062
1.1/4 7 5.3/4 2.9/16 1“ 1.0210 0.7660 4 H4 1011064
1.3/8 6 6.1/16 3“ 1.1/16 1.1000 0.8310 4 H4 1011066
1.1/2 6 6.3/8 3“ 1.1/8 1.2300 0.9250 4 H4 1011068
1500S(UNF)
UNF TPI
l1
Inch
l2
Inch
l3
Inch
d2
Ø
Inch a
Inch
#
Flutes Limits
EDP #
or
e-Code
1/4 28 2.1/2 1“ 5/16 0.2550 0.1910 4 H3 1011032
5/16 24 2.23/32 1.1/8 3/8 0.3180 0.2380 4 H3 1011038
3/8 24 2.15/16 1.1/4 7/16 0.3810 0.2860 4 H3 1011044
7/16 20 3.5/32 1.7/16 13/32 0.3230 0.2420 4 H3 1011046
1/2 20 3.3/8 1.21/32 7/16 0.3670 0.2750 4 H3 1011048
9/16 18 3.19/32 1.21/32 1/2 0.4290 0.3220 4 H3 1011050
5/8 18 3.13/16 1.13/16 9/16 0.4800 0.3600 4 H3 1011052
3/4 16 4.1/4 2“ 11/16 0.5900 0.4420 4 H3 1011056
7/8 14 4.11/16 2.7/32 3/4 0.6970 0.5230 4 H4 1011058
1“ 12 5.1/8 2.1/2 13/16 0.8000 0.6000 4 H4 1011060
1.1/8 12 5.7/16 2.9/16 7/8 0.8960 0.6720 4 H4 1011063
1.1/4 12 5.3/4 2.9/16 1“ 1.0210 0.7660 6 H4 1011065
1.3/8 12 6.1/16 3“ 1.1/16 1.1000 0.8310 6 H4 1011067
1.1/2 12 6.3/8 3“ 1.1/8 1.2300 0.9250 6 H4 1011069
ƔHand Tap, Set of 3 pcs
ƔSet includes taper, plug, and
bottoming tap
Ɣ Tarauds à main - Jeu de 3 ƔMachos de mano, Juego de 3 piezas
1500S(UNS)
UNS TPI
l1
Inch
l2
Inch
l3
Inch
d2
Ø
Inch a
Inch
#
Flutes Limits
EDP #
or
e-Code
11/16 11 4.1/32 1.13/16 5/8 0.5420 0.4060 4 H3 1011053
11/16 16 4.1/32 1.13/16 5/8 0.5420 0.4060 4 H3 1011054
1“ 14 5.1/8 2.1/2 13/16 0.8000 0.6000 4 H4 1011061
1500S(UNC)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 225
www.precisiondormer.com
1700(M)
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
M1.6 0.35 1.5/8 5/16 0.141 0.110 3/16 2 D3 T 1012408
M1.6 0.35 1.5/8 5/16 0.141 0.110 3/16 2 D3 P 1012409
M1.6 0.35 1.5/8 5/16 0.141 0.110 3/16 2 D3 B 1012410
M1.8 0.35 1.11/16 3/8 0.141 0.110 3/16 2 D3 T 1012411
M1.8 0.35 1.11/16 3/8 0.141 0.110 3/16 2 D3 P 1012412
M1.8 0.35 1.11/16 3/8 0.141 0.110 3/16 2 D3 B 1012413
M2 0.40 1.3/4 7/16 0.141 0.110 3/16 3 D3 T 1012414
M2 0.40 1.3/4 7/16 0.141 0.110 3/16 3 D3 P 1012415
M2 0.40 1.3/4 7/16 0.141 0.110 3/16 3 D3 B 1012416
M2.3 0.45 1.3/4 7/16 0.141 0.110 3/16 3 D3 P 1012421
M2.3 0.45 1.3/4 7/16 0.141 0.110 3/16 3 D3 B 1012422
M2.5 0.45 1.13/16 1/2 0.141 0.110 3/16 3 D3 T 1012423
M2.5 0.45 1.13/16 1/2 0.141 0.110 3/16 3 D3 P 1012424
M2.5 0.45 1.13/16 1/2 0.141 0.110 3/16 3 D3 B 1012425
M2.6 0.45 1.13/16 1/2 0.141 0.110 3/16 3 D3 T 1012426
M2.6 0.45 1.13/16 1/2 0.141 0.110 3/16 3 D3 P 1012427
M2.6 0.45 1.13/16 1/2 0.141 0.110 3/16 3 D3 B 1012428
M3 0.50 1.15/16 5/8 0.141 0.110 3/16 3 D3 T 1012432
M3 0.50 1.15/16 5/8 0.141 0.110 3/16 3 D3 P 1012433
M3 0.50 1.15/16 5/8 0.141 0.110 3/16 3 D3 B 1012434
M3.5 0.60 2“ 11/16 0.141 0.110 3/16 3 D4 T 1012435
M3.5 0.60 2“ 11/16 0.141 0.110 3/16 3 D4 P 1012436
M3.5 0.60 2“ 11/16 0.141 0.110 3/16 3 D4 B 1012437
M4 0.70 2.1/8 3/4 0.168 0.131 1/4 4 D4 T 1012441
M4 0.70 2.1/8 3/4 0.168 0.131 1/4 4 D4 P 1012442
M4 0.70 2.1/8 3/4 0.168 0.131 1/4 4 D4 B 1012443
M4.5 0.75 2.3/8 7/8 0.194 0.152 1/4 4 D4 T 1012444
M4.5 0.75 2.3/8 7/8 0.194 0.152 1/4 4 D4 P 1012445
M4.5 0.75 2.3/8 7/8 0.194 0.152 1/4 4 D4 B 1012446
M5 0.80 2.3/8 7/8 0.194 0.152 1/4 4 D4 T 1012453
M5 0.80 2.3/8 7/8 0.194 0.152 1/4 4 D4 P 1012454
M5 0.80 2.3/8 7/8 0.194 0.152 1/4 4 D4 B 1012455
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 4 D5 T 1012459
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 4 D5 P 1012460
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 4 D5 B 1012461
M7 1.00 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 T 1012465
M7 1.00 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 P 1012466
M7 1.00 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 B 1012467
Ɣ
ƔHand Tap
ƔFor use in a wide variety of materials
and appropriate in either through or
blind hole applications
Ɣ Tarauds à main ƔMachos de mano
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
226 www.precisiondormer.com
1700(M)
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
M8 1.00 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 T 1012468
M8 1.00 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 P 1012469
M8 1.00 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 B 1012470
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 T 1012471
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 P 1012472
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 B 1012473
M9 1.25 2.15/16 1.1/4 0.381 0.286 7/16 4 D5 P 1012478
M9 1.25 2.15/16 1.1/4 0.381 0.286 7/16 4 D5 B 1012479
M10 1.25 2.15/16 1.1/4 0.381 0.286 7/16 4 D5 T 1012480
M10 1.25 2.15/16 1.1/4 0.381 0.286 7/16 4 D5 P 1012481
M10 1.25 2.15/16 1.1/4 0.381 0.286 7/16 4 D5 B 1012482
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 4 D6 T 1012483
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 4 D6 P 1012484
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 4 D6 B 1012485
M11 1.50 3.5/32 1.7/16 0.323 0.242 13/32 4 D6 P 1012493
M11 1.50 3.5/32 1.7/16 0.323 0.242 13/32 4 D6 B 1012494
M12 1.25 3.3/8 1.21/32 0.367 0.275 7/16 4 D5 T 1012498
M12 1.25 3.3/8 1.21/32 0.367 0.275 7/16 4 D5 P 1012499
M12 1.25 3.3/8 1.21/32 0.367 0.275 7/16 4 D5 B 1012500
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 4 D6 T 1012495
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 4 D6 P 1012496
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 4 D6 B 1012497
M14 1.50 3.19/32 1.21/32 0.429 0.322 1/2 4 D6 T 1012501
M14 1.50 3.19/32 1.21/32 0.429 0.322 1/2 4 D6 P 1012502
M14 1.50 3.19/32 1.21/32 0.429 0.322 1/2 4 D6 B 1012503
M14 2.00 3.19/32 1.21/32 0.429 0.322 1/2 4 D7 T 1012504
M14 2.00 3.19/32 1.21/32 0.429 0.322 1/2 4 D7 P 1012505
M14 2.00 3.19/32 1.21/32 0.429 0.322 1/2 4 D7 B 1012506
M16 1.50 3.13/16 1.13/16 0.480 0.360 9/16 4 D6 T 1012513
M16 1.50 3.13/16 1.13/16 0.480 0.360 9/16 4 D6 P 1012514
M16 1.50 3.13/16 1.13/16 0.480 0.360 9/16 4 D6 B 1012515
M16 2.00 3.13/16 1.13/16 0.480 0.360 9/16 4 D7 T 1012516
M16 2.00 3.13/16 1.13/16 0.480 0.360 9/16 4 D7 P 1012517
M16 2.00 3.13/16 1.13/16 0.480 0.360 9/16 4 D7 B 1012518
M18 1.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D6 T 1012522
M18 1.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D6 P 1012523
M18 1.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D6 B 1012524
M18 2.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D7 T 1012525
M18 2.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D7 P 1012526
M18 2.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D7 B 1012527
M20 1.50 4.15/32 2“ 0.652 0.489 11/16 4 D6 T 1012534
M20 1.50 4.15/32 2“ 0.652 0.489 11/16 4 D6 P 1012535
M20 1.50 4.15/32 2“ 0.652 0.489 11/16 4 D6 B 1012536
M20 2.50 4.15/32 2“ 0.652 0.489 11/16 4 D7 T 1012537
M20 2.50 4.15/32 2“ 0.652 0.489 11/16 4 D7 P 1012538
M20 2.50 4.15/32 2“ 0.652 0.489 11/16 4 D7 B 1012539
M22 1.50 4.11/16 2.7/32 0.697 0.523 3/4 4 D6 T 1012540
M22 1.50 4.11/16 2.7/32 0.697 0.523 3/4 4 D6 P 1012541
M22 1.50 4.11/16 2.7/32 0.697 0.523 3/4 4 D6 B 1012542
M22 2.50 4.11/16 2.7/32 0.697 0.523 3/4 4 D7 T 1012543
M22 2.50 4.11/16 2.7/32 0.697 0.523 3/4 4 D7 P 1012544
M22 2.50 4.11/16 2.7/32 0.697 0.523 3/4 4 D7 B 1012545
M24 2.00 4.29/32 2.7/32 0.760 0.570 3/4 4 D7 T 1012546
M24 2.00 4.29/32 2.7/32 0.760 0.570 3/4 4 D7 P 1012547
M24 2.00 4.29/32 2.7/32 0.760 0.570 3/4 4 D7 B 1012548
M24 3.00 4.29/32 2.7/32 0.760 0.570 3/4 4 D8 T 1012555
M24 3.00 4.29/32 2.7/32 0.760 0.570 3/4 4 D8 P 1012556
M24 3.00 4.29/32 2.7/32 0.760 0.570 3/4 4 D8 B 1012557
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 227
www.precisiondormer.com
Ɣ Tarauds à main - Jeu de 3
1700(M) - 1700S
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
M30 3.50 5.7/16 2.9/16 1.021 0.766 1“ 4 D9 T 1012570
M30 3.50 5.7/16 2.9/16 1.021 0.766 1“ 4 D9 P 1012571
M30 3.50 5.7/16 2.9/16 1.021 0.766 1“ 4 D9 B 1012572
M36 4.00 6.1/16 3“ 1.233 0.925 1.1/8 4 D9 T 1012573
M36 4.00 6.1/16 3“ 1.233 0.925 1.1/8 4 D9 P 1012574
M36 4.00 6.1/16 3“ 1.233 0.925 1.1/8 4 D9 B 1012575
1700S
MP
mm
l1
Inch
l2
Inch
l3
Inch
d2
Ø
Inch a
Inch
#
Flutes Limits
EDP #
or
e-Code
20.40 1.3/4 7/16 3/16 .1410 .1100 3 D3 1012558
2.5 0.45 1.13/16 1/2 3/16 .1410 .1100 3 D3 1012560
2.6 0.45 1.13/16 1/2 3/16 .1410 .1100 3 D3 1012559
30.50 1.5/16 5/8 3/16 .1410 .1100 3 D4 1012561
3.5 0.60 2“ 11/16 3/16 .1410 .1100 4 D4 1012562
40.70 2.1/8 3/4 1/47 0.1680 0.1310 4 D4 1012563
50.80 2.3/8 7/8 1/4 0.1940 0.1520 4 D4 1012564
61.00 2.1/2 1“ 5/16 0.2550 0.1910 4 D5 1012565
71.00 2.23/32 1.1/8 3/8 0.3180 0.2380 4 D5 1012576
81.00 2.23/32 1.1/8 3/8 0.3180 0.2380 4 D5 1012577
81.25 2.23/32 1.1/8 3/8 0.3180 0.2380 4 D5 1012566
10 1.25 2.15/16 1.1/4 7/16 0.3810 0.2860 4 D5 1012578
10 1.50 2.15/16 1.1/4 7/16 0.3810 0.2860 4 D6 1012567
12 1.25 3.3/8 1.21/32 7/16 0.3670 0.2750 4 D5 1012579
12 1.75 3.3/8 1.21/32 7/16 0.3670 0.2750 4 D6 1012568
14 2.00 3.19/32 1.21/32 1/2 0.4290 0.3220 4 D7 1012580
16 2.00 3.13/16 1.13/16 9/16 0.4800 0.3600 4 D7 1012581
18 2.50 4.1/32 1.13/16 5/8 0.5420 0.4060 4 D7 1012582
20 2.50 4.15/32 2“ 11/16 0.6520 0.4890 4 D7 1012583
ƔHand Tap, Set of 3 pcs ƔMachos de mano, Juego de 3 piezas
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
228 www.precisiondormer.com
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1.000 0.255 0.191 5/16 4 H3 B 1050021
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 1050039
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 1050061
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 1050079
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 1050097
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 1050113
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 1050128
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 1050149
7/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 1050163
1500A(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1.000 0.255 0.191 5/16 4 H3 P 1050006
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 1050028
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 1050050
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 1050070
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 1050088
9/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 1050106
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 1050121
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 1050142
7/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 1050157
1“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 1050170
ƔHand Tap
ƔFor use in a wide variety of materials
and appropriate in either through or
blind hole applications
Ɣ Tarauds à main ƔMachos de mano
Ɣ
Ɣ
1500A(UNF)
1500A(UNC)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 229
www.precisiondormer.com
TN1500(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1.000 0.255 0.191 5/16 4 H3 P 1060006
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 1060028
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 1060050
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 1060070
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 1060088
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 B 1060092
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 1060121
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 B 1060123
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 B 1060144
7/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 1060157
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1.000 0.255 0.191 5/16 4 H3 P 1060017
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 1060039
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 1060061
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 1060079
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 1060097
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 B 1060131
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 B 1060152
Ɣ
Ɣ
TN1500(UNF)
TN1500(UNC)
ƔHand Tap
ƔFor use in a wide variety of materials
and appropriate in either through or
blind hole applications
Ɣ Tarauds à main ƔMachos de mano
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
230 www.precisiondormer.com
1500L(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H3 P 1011772
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 1011778
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 1011784
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 1011790
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 1011796
9/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 1011802
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 1011808
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 1011820
7/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 1011826
1“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 1011832
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H3 P 1011775
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 1011781
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 1011787
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 1011793
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 1011799
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 1011805
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 1011811
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 1011823
7/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 H4 P 1011829
1“ 12 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 1011835
Ɣ
Ɣ
1500L(UNC)
1500L(UNF)
Ɣ Tarauds à mainƔHand Tap ƔMachos de mano
ƔFor use in a wide variety of materials
and appropriate in either through or
blind hole applications
ƔLeft Hand
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 231
www.precisiondormer.com
1500L(UNS) - 1500OV(UNC)
UNS TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1“ 14 5.1/8 2.1/2 0.800 0.600 13/16 4 H4 P 1011838
1500OV(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1.000 0.255 0.191 5/16 4 H11 P 1011748
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H11 P 1011749
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H11 P 1011750
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H11 P 1011751
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H11 P 1011752
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H11 P 1011753
ƔHand Tap, .005” Oversize
ƔFor use in a wide variety of materials and
appropriate in either through or blind hole
applications
Ɣ Tarauds à main ƔMachos de mano
Ɣ
Ɣ
1500L(UNS)
Ɣ Tarauds à mainƔHand Tap ƔMachos de mano
ƔFor use in a wide variety of materials
and appropriate in either through or
blind hole applications
ƔLeft Hand
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
232 www.precisiondormer.com
1508(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 1010219
1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 1010216
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 1010233
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1010230
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 B 1010243
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1010240
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1010248
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010253
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1010252
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 1010226
1/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 1010223
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 1010237
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1010236
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1010250
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1010254
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 B 1010247
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1010246
Ɣ
Ɣ
1508(UNC)
1508(UNF)
ƔFor use in a wide variety of materials
and appropriate in either through or
blind hole applications
Ɣ Tarauds à mainƔHand Tap ƔMachos de mano
ƔOptional Flutes
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 233
www.precisiondormer.com
1595(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 1010206
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 1010207
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 1010210
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 B 1010211
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 1010208
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 1010209
Ŷ
Ɣ
Ŷ
Ɣ
1595(UNC)
1595(UNF)
ƔHand Tap
ƔFor use in a wide variety of materials
and appropriate in either through or
blind hole applications
Ɣ Tarauds à main ƔMachos de mano
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
234 www.precisiondormer.com
1505(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
2.3/4 8 9.1/4 4“ 2.350 1.762 1.9/16 6 H8 B 1013351
2.3/4 8 9.1/4 4“ 2.350 1.762 1.9/16 6 H8 P 1013350
2.3/4 8 9.1/4 4“ 2.350 1.762 1.9/16 6 H8 T 1013349
2.7/8 8 9.1/4 4“ 2.475 1.856 1.9/16 6 H8 B 1013354
2.7/8 8 9.1/4 4“ 2.475 1.856 1.9/16 6 H8 P 1013353
2.7/8 8 9.1/4 4“ 2.475 1.856 1.9/16 6 H8 T 1013352
3“ 8 9.3/4 4.9/16 2.668 2.001 1.5/8 6 H8 B 1013357
3“ 8 9.3/4 4.9/16 2.668 2.001 1.5/8 6 H8 P 1013356
3“ 8 9.3/4 4.9/16 2.668 2.001 1.5/8 6 H8 T 1013355
Ɣ
ƔHand Tap, Eight-Pitch
ƔFor use in a wide variety of materials
and appropriate in either through or
blind hole applications
Ɣ Tarauds à main, Eight-Pitch ƔMachos de mano, Eight-Pitch
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 235
www.precisiondormer.com
1505(UNS)
UNS TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1.1/8 8 5.7/16 2.9/16 0.896 0.672 7/8 4 H5 B 1013312
1.1/8 8 5.7/16 2.9/16 0.896 0.672 7/8 4 H5 P 1013311
1.1/8 8 5.7/16 2.9/16 0.896 0.672 7/8 4 H5 T 1013310
1.1/4 8 5.3/4 2.9/16 1.021 0.766 1“ 4 H5 B 1013315
1.1/4 8 5.3/4 2.9/16 1.021 0.766 1“ 4 H5 P 1013314
1.1/4 8 5.3/4 2.9/16 1.021 0.766 1“ 4 H5 T 1013313
1.3/8 8 6.1/16 3“ 1.108 0.831 1.1/16 4 H5 B 1013318
1.3/8 8 6.1/16 3“ 1.108 0.831 1.1/16 4 H5 P 1013317
1.3/8 8 6.1/16 3“ 1.108 0.831 1.1/16 4 H5 T 1013316
1.1/2 8 6.3/8 3“ 1.233 0.925 1.1/8 6 H5 B 1013321
1.1/2 8 6.3/8 3“ 1.233 0.925 1.1/8 6 H5 P 1013320
1.1/2 8 6.3/8 3“ 1.233 0.925 1.1/8 6 H5 T 1013319
1.5/8 8 6.11/16 3.3/16 1.305 0.978 1.1/8 6 H6 B 1013324
1.5/8 8 6.11/16 3.3/16 1.305 0.978 1.1/8 6 H6 P 1013323
1.5/8 8 6.11/16 3.3/16 1.305 0.978 1.1/8 6 H6 T 1013322
1.3/4 8 7“ 3.3/16 1.430 1.072 1.1/4 6 H6 B 1013327
1.3/4 8 7“ 3.3/16 1.430 1.072 1.1/4 6 H6 P 1013326
1.3/4 8 7“ 3.3/16 1.430 1.072 1.1/4 6 H6 T 1013325
1.7/8 8 7.5/16 3.9/16 1.519 1.139 1.1/4 6 H6 B 1013330
1.7/8 8 7.5/16 3.9/16 1.519 1.139 1.1/4 6 H6 P 1013329
1.7/8 8 7.5/16 3.9/16 1.519 1.139 1.1/4 6 H6 T 1013328
2“ 8 7.5/8 3.9/16 1.644 1.233 1.3/8 6 H6 B 1013333
2“ 8 7.5/8 3.9/16 1.644 1.233 1.3/8 6 H6 P 1013332
2“ 8 7.5/8 3.9/16 1.644 1.233 1.3/8 6 H6 T 1013331
2.1/8 8 8“ 3.9/16 1.769 1.327 1.3/8 6 H6 B 1013336
2.1/8 8 8“ 3.9/16 1.769 1.327 1.3/8 6 H6 P 1013335
2.1/8 8 8“ 3.9/16 1.769 1.327 1.3/8 6 H6 T 1013334
2.1/4 8 8.1/4 3.9/16 1.894 1.420 1.7/16 6 H6 B 1013339
2.1/4 8 8.1/4 3.9/16 1.894 1.420 1.7/16 6 H6 P 1013338
2.1/4 8 8.1/4 3.9/16 1.894 1.420 1.7/16 6 H6 T 1013337
2.3/8 8 8.1/2 4“ 2.019 1.514 1.7/16 6 H6 B 1013342
2.3/8 8 8.1/2 4“ 2.019 1.514 1.7/16 6 H6 P 1013341
2.3/8 8 8.1/2 4“ 2.019 1.514 1.7/16 6 H6 T 1013340
2.1/2 8 8.3/4 4“ 2.100 1.575 1.1/2 6 H6 B 1013345
2.1/2 8 8.3/4 4“ 2.100 1.575 1.1/2 6 H6 P 1013344
2.1/2 8 8.3/4 4“ 2.100 1.575 1.1/2 6 H6 T 1013343
2.5/8 8 8.3/4 4“ 2.225 1.669 1.1/2 6 H8 B 1013348
2.5/8 8 8.3/4 4“ 2.225 1.669 1.1/2 6 H8 P 1013347
Ɣ
Ɣ Tarauds à main, Eight-PitchƔHand Tap, Eight-Pitch
ƔFor use in a wide variety of materials
and appropriate in either through or
blind hole applications
ƔMachos de mano, Eight-Pitch
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
236 www.precisiondormer.com
1505(UNS) - 1572(UNC)
UNS TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
2.5/8 8 8.3/4 4“ 2.225 1.669 1.1/2 6 H8 P 1013347
2.5/8 8 8.3/4 4“ 2.225 1.669 1.1/2 6 H8 T 1013346
1572(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
440 2“ 11/16 0.141 0.110 3/16 3 H2 P 1010419
440 2“ 11/16 0.141 0.110 3/16 3 H2 B 1010421
632 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 1010427
632 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 1010429
832 2.3/8 15/16 0.220 0.165 9/32 3 H3 P 1010435
832 2.3/8 15/16 0.220 0.165 9/32 3 H3 B 1010437
10 24 2.1/2 1“ 0.255 0.191 5/16 3 H2 P 1010438
10 24 2.1/2 1“ 0.255 0.191 5/16 3 H2 B 1010440
1/4 20 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1010451
1/4 20 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 1010453
5/16 18 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 1010458
5/16 18 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 B 1010460
3/8 16 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 1010466
3/8 16 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 B 1010468
7/16 14 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 1010474
1/2 13 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 1010482
Ɣ
Ŷ
ƔSTI Taps are oversized so that the
thread they produce will accept a heli-
cal coil wire screw thread insert of the
same nominal size and pitch
ƔFor use in aluminum, magnesium, and
non-ferrous materials
ƔScrew Thread Insert
1505(UNS)
Ɣ Tarauds à mainƔHand Tap Ɣ Machos de mano
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 237
www.precisiondormer.com
Ɣ Tarauds à main
1572(UNF) - U1511
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
10 32 2.1/2 1“ 0.255 0.191 5/16 3 H2 P 1010442
10 32 2.1/2 1“ 0.255 0.191 5/16 3 H2 B 1010444
10 32 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 1010443
10 32 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 1010445
1/4 28 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1010454
1/4 28 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 1010456
7/16 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 1010478
1/2 20 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 1010486
U1511
U1511
Ɣ
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 5“ 1.5/8 0.185 0.139 9/16 4 H3 T 1010375
5/16 18 5.1/2 1.13/16 0.240 0.180 5/8 4 H3 T 1010376
3/8 16 6“ 2“ 0.294 0.220 11/16 4 H3 T 1010377
1/2 13 7“ 2.1/2 0.400 0.300 7/8 4 H3 T 1010378
ƔHand Tap ƔMachos de mano
Ɣ
Ŷ
ƔFor use in medium to low carbon steel,
bronze, aluminum, and brass
Ɣ Taps have a relatively long shank
smaller than the minor diameter to
permit the accumulation of several
nuts after tapping
ƔNut Style
ƔSTI Taps are oversized so that the
thread they produce will accept a heli-
cal coil wire screw thread insert of the
same nominal size and pitch
ƔFor use in aluminum, magnesium, and
non-ferrous materials
ƔScrew Thread Insert
Ɣ Tarauds à mainƔHand Tap ƔMachos de mano
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
238 www.precisiondormer.com
1519(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 6“ 1.000 0.255 0.191 5/16 4 H3 P 1010379
1/4 20 8“ 1.000 0.255 0.191 5/16 4 H3 P 1010380
5/16 18 6“ 1.1/8 0.318 0.238 3/8 4 H3 P 1010381
5/16 18 8“ 1.1/8 0.318 0.238 3/8 4 H3 P 1010382
3/8 16 6“ 1.1/4 0.381 0.286 7/16 4 H3 P 1010383
3/8 16 8“ 1.1/4 0.381 0.286 7/16 4 H3 P 1010384
3/8 16 10“ 1.1/4 0.381 0.286 7/16 4 H3 P 1010385
7/16 14 6“ 1.7/16 0.444 0.333 1/2 4 H3 P 1010386
7/16 14 8“ 1.7/16 0.444 0.333 1/2 4 H3 P 1010387
1/2 13 6“ 1.21/32 0.507 0.380 9/16 4 H3 P 1010388
1/2 13 8“ 1.21/32 0.507 0.380 9/16 4 H3 P 1010389
1/2 13 10“ 1.21/32 0.507 0.380 9/16 4 H3 P 1010390
1/2 13 12“ 1.21/32 0.507 0.380 9/16 4 H3 P 1010391
5/8 11 6“ 1.13/16 0.633 0.475 11/16 4 H3 P 1010392
5/8 11 8“ 1.13/16 0.633 0.475 11/16 4 H3 P 1010393
5/8 11 10“ 1.13/16 0.633 0.475 11/16 4 H3 P 1010394
5/8 11 12“ 1.13/16 0.633 0.475 11/16 4 H3 P 1010395
3/4 10 10“ 2.000 0.759 0.569 3/4 4 H3 P 1010396
3/4 10 12“ 2.000 0.759 0.569 3/4 4 H3 P 1010397
Ɣ
Ɣ Pulley Style
Ɣ These taps have the same major
and pitch diameters as standard
size taps, but with extended shanks
for reaching locations inaccessible
to regular length hand taps
Ɣ Tarauds à mainƔHand Tap ƔMachos de mano
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 239
www.precisiondormer.com
1600(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H5 P 1011256
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H5 B 1011257
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H5 P 1011260
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H5 B 1011261
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H5 P 1011264
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H5 B 1011265
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 P 1011268
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 B 1011269
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 P 1011272
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 B 1011273
9/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H5 P 1011276
9/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H5 B 1011277
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 P 1011280
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 B 1011281
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H5 P 1011284
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H5 B 1011285
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H5 P 1011258
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H5 B 1011259
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H5 P 1011262
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H5 B 1011263
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H5 P 1011266
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H5 B 1011267
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 P 1011270
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H5 B 1011271
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 P 1011274
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H5 B 1011275
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H5 P 1011278
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H5 B 1011279
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 P 1011282
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H5 B 1011283
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H5 P 1011286
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H5 B 1011287
Ŷ
Ɣ
ŶƔ
1600(UNF)
1600(UNC)
Ɣ Tarauds à mainƔHand Tap
ƔDesigned for through or blind tapping
with a specifi c cutting geometry for gray
cast irons and those irons producing
broken chips
ƔMachos de mano
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
240 www.precisiondormer.com
1599(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H3 P 1010256
1/4 20 2.1/2 1“ 0.255 0.191 5/16 4 H3 B 1010257
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 1010260
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 B 1010261
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 1010264
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 B 1010265
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 1010268
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 B 1010269
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 1010272
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 B 1010273
9/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 1010276
9/16 12 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 B 1010277
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 1010280
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 B 1010281
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 1010284
3/4 10 4.1/4 2“ 0.590 0.442 11/16 4 H3 B 1010285
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H3 P 1010258
1/4 28 2.1/2 1“ 0.255 0.191 5/16 4 H3 B 1010259
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 P 1010262
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 4 H3 B 1010263
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 P 1010266
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 4 H3 B 1010267
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 P 1010270
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 4 H3 B 1010271
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 P 1010274
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 4 H3 B 1010275
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 P 1010278
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 4 H3 B 1010279
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 P 1010282
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 4 H3 B 1010283
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 P 1010286
3/4 16 4.1/4 2“ 0.590 0.442 11/16 4 H3 B 1010287
Ŷ
Ɣ
ŶƔ
1599(UNF)
1599(UNC)
Ɣ Tarauds à mainƔHand Tap
ƔDesigned for through or blind tapping
with a specifi c cutting geometry for gray
cast irons and other irons producing
broken chips
ƔMachos de mano
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 241
www.precisiondormer.com
Ɣ Tarauds à main
1599(M) - 1599SB(M)
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 4 D5 P 1012256
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 4 D5 B 1012266
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 P 1012258
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 B 1012268
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 4 D6 P 1012260
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 4 D6 B 1012270
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 4 D6 P 1012262
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 4 D6 B 1012272
M14 1.50 3.19/32 1.21/32 0.429 0.322 1/2 4 D4 P 1010288
M18 1.50 4.1/32 1.13/16 0.542 0.406 5/8 4 D4 P 1010289
1599SB(M)
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 4 D5 SB 1012276
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 4 D5 SB 1012278
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 4 D6 SB 1012280
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 4 D6 SB 1012282
ƔHand Tap
ƔSB = Semi-Bottoming
ƔDesigned for through or blind
tapping with a specifi c cutting
geometry for gray cast irons and
those irons producing broken chips
ƔMachos de mano
Ŷ
Ɣ
Ŷ
Ɣ
1599(M)
Ɣ Tarauds à mainƔHand Tap
ƔDesigned for through or blind tapping
with a specifi c cutting geometry for
gray cast irons and those irons
producing broken chips
ƔMachos de mano
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
242 www.precisiondormer.com
E059 - E053
E059
Ŷ
Ɣ
UNC TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
1/4 20 6.35 66 13 6.30 5.00 8 3 5.1 26 0607046 E0591/4
5/16 18 7.94 72 16 8.00 6.30 9 3 6.6 29 0607053 E0595/16
3/8 16 9.53 80 18 10.00 8.00 11 3 8 32 0607060 E0593/8
1/2 13 12.70 89 22 9.00 7.10 10 3 10.8 0607077 E0591/2
5/8 11 15.88 102 24 12.50 10.00 13 3 13.5 0607084 E0595/8
3/4 10 19.05 112 29 14.00 11.20 14 3 16.5 0607091 E0593/4
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
30.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0606476 E053M3
40.70 53 14 4.00 3.15 6 4 3.3 14 0606483 E053M4
50.80 58 11 5.00 4.00 7 4 4.2 22 0606490 E053M5
61.00 66 13 6.30 5.00 8 4 5 26 0606506 E053M6
81.25 72 16 8.00 6.30 9 4 6.8 29 0606513 E053M8
10 1.50 80 18 10.00 8.00 11 4 8.5 34 0606520 E053M10
12 1.75 89 22 9.00 7.10 10 4 10.3 0606537 E053M12
14 2.00 95 24 11.20 9.00 12 4 12 0606544 E053M14
16 2.00 102 24 12.50 10.00 13 4 14 0606551 E053M16
20 2.50 112 29 14.00 11.20 14 4 17.5 0606568 E053M20
E053
ƔMachine Tap MTT-X, For Cast Iron Ɣ MTT-X Tarauds machine ƔMTT-X Machos de máquina
ƔMachine Tap MTT-X, For Cast Iron Ɣ MTT-X Tarauds machine ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 243
www.precisiondormer.com
E054
Ŷ
Ɣ
MF P
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
81.00 72 16 8.00 6.30 9 4 7 29 0606575 E054M8X1.0
10 1.00 80 18 10.00 8.00 11 4 9 34 0606582 E054M10X1.0
10 1.25 80 18 10.00 8.00 11 4 8.8 34 0606599 E054M10X1.25
12 1.00 89 22 9.00 7.10 10 4 11 0606605 E054M12X1.0
12 1.25 89 22 9.00 7.10 10 4 10.8 0606612 E054M12X1.25
12 1.50 89 22 9.00 7.10 10 4 10.5 0606629 E054M12X1.5
14 1.25 95 24 11.20 9.00 12 4 12.8 0606636 E054M14X1.25
14 1.50 95 24 11.20 9.00 12 4 12.5 0606643 E054M14X1.5
16 1.50 102 24 12.50 10.00 13 4 14.5 0606650 E054M16X1.5
ƔMachine Tap MTT-X, For Cast Iron Ɣ MTT-X Tarauds machine ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
244 www.precisiondormer.com
E500
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
10.25 38 4.5 2.50 2.00 4 2 0.75 4.5 0160152 E500M1NO1
10.25 38 4.5 2.50 2.00 4 2 0.75 4.5 0160169 E500M1NO2
10.25 38 4.5 2.50 2.00 4 2 0.75 4.5 0122464 E500M1NO3
1.2 0.25 38 4.5 2.50 2.00 4 2 0.95 4.5 0160176 E500M1.2NO1
1.2 0.25 38 4.5 2.50 2.00 4 2 0.95 4.5 0160183 E500M1.2NO2
1.2 0.25 38 4.5 2.50 2.00 4 2 0.95 4.5 0122471 E500M1.2NO3
1.4 0.30 40 6 2.50 2.00 4 2 1.1 6 0160190 E500M1.4NO1
1.4 0.30 40 6 2.50 2.00 4 2 1.1 6 0160206 E500M1.4NO2
1.4 0.30 40 6 2.50 2.00 4 2 1.1 6 0122488 E500M1.4NO3
1.6 0.35 41 8 2.50 2.00 4 2 1.25 8 0155035 E500M1.6NO1
1.6 0.35 41 8 2.50 2.00 4 2 1.25 8 0139950 E500M1.6NO2
1.6 0.35 41 8 2.50 2.00 4 2 1.25 8 0093900 E500M1.6NO3
1.6 0.35 41 8 2.50 2.00 4 2 1.25 8 0155028 E500M1.6NO6
1.7 0.35 41 8 2.50 2.00 4 2 1.35 8 0155004 E500M1.7NO1
1.7 0.35 41 8 2.50 2.00 4 2 1.35 8 0093924 E500M1.7NO2
1.7 0.35 41 8 2.50 2.00 4 2 1.35 8 0093931 E500M1.7NO3
1.7 0.35 41 8 2.50 2.00 4 2 1.35 8 0154991 E500M1.7NO6
1.8 0.35 41 8 2.50 2.00 4 2 1.45 8 0154960 E500M1.8NO1
1.8 0.35 41 8 2.50 2.00 4 2 1.45 8 0093948 E500M1.8NO2
1.8 0.35 41 8 2.50 2.00 4 2 1.45 8 0093955 E500M1.8NO3
1.8 0.35 41 8 2.50 2.00 4 2 1.45 8 0154953 E500M1.8NO6
20.40 41 8 2.50 2.00 4 3 1.6 8 0094259 E500M2NO1
20.40 41 8 2.50 2.00 4 3 1.6 8 0094266 E500M2NO2
20.40 41 8 2.50 2.00 4 3 1.6 8 0094273 E500M2NO3
20.40 41 8 2.50 2.00 4 3 1.6 8 0154939 E500M2NO6
20.45 41 8 2.50 2.00 4 3 1.55 8 0160244 E500M2X.45NO1
20.45 41 8 2.50 2.00 4 3 1.55 8 0160251 E500M2X.45NO2
20.45 41 8 2.50 2.00 4 3 1.55 8 0160268 E500M2X.45NO3
2.2 0.45 44.5 9.5 2.80 2.24 5 3 1.75 9.5 0154915 E500M2.2NO1
2.2 0.45 44.5 9.5 2.80 2.24 5 3 1.75 9.5 0094167 E500M2.2NO2
2.2 0.45 44.5 9.5 2.80 2.24 5 3 1.75 9.5 0094174 E500M2.2NO3
2.2 0.45 44.5 9.5 2.80 2.24 5 3 1.75 9.5 0154908 E500M2.2NO6
2.3 0.45 44.5 9.5 2.80 2.24 5 3 1.85 9.5 0154885 E500M2.3NO1
2.3 0.45 44.5 9.5 2.80 2.24 5 3 1.85 9.5 0094198 E500M2.3NO2
2.3 0.45 44.5 9.5 2.80 2.24 5 3 1.85 9.5 0094204 E500M2.3NO3
2.3 0.45 44.5 9.5 2.80 2.24 5 3 1.85 9.5 0154878 E500M2.3NO6
2.5 0.45 44.5 9.5 2.80 2.24 5 3 2.05 9.5 0154854 E500M2.5NO1
2.5 0.45 44.5 9.5 2.80 2.24 5 3 2.05 9.5 0094228 E500M2.5NO2
ƔMachine Tap, Straight Flute Ɣ Tarauds machine ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 245
www.precisiondormer.com
E500
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
2.5 0.45 44.5 9.5 2.80 2.24 5 3 2.05 9.5 0094235 E500M2.5NO3
2.5 0.45 44.5 9.5 2.80 2.24 5 3 2.05 9.5 0154847 E500M2.5NO6
2.6 0.45 44.5 9.5 2.80 2.24 5 3 2.15 9.5 0156735 E500M2.6NO1
2.6 0.45 44.5 9.5 2.80 2.24 5 3 2.15 9.5 0156742 E500M2.6NO2
2.6 0.45 44.5 9.5 2.80 2.24 5 3 2.15 9.5 0122440 E500M2.6NO3
2.6 0.45 44.5 9.5 2.80 2.24 5 3 2.15 9.5 0156759 E500M2.6NO6
30.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0154823 E500M3NO1
30.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0094440 E500M3NO2
30.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0094457 E500M3NO3
30.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0094464 E500M3NO6
30.60 48 12.5 3.15 2.50 5 3 2.4 12.5 0159927 E500M3X.6NO1
30.60 48 12.5 3.15 2.50 5 3 2.4 12.5 0159934 E500M3X.6NO2
30.60 48 12.5 3.15 2.50 5 3 2.4 12.5 0159941 E500M3X.6NO3
3.5 0.60 50 14 3.55 2.80 5 3 2.9 14 0094402 E500M3.5NO1
3.5 0.60 50 14 3.55 2.80 5 3 2.9 14 0094419 E500M3.5NO2
3.5 0.60 50 14 3.55 2.80 5 3 2.9 14 0094426 E500M3.5NO3
3.5 0.60 50 14 3.55 2.80 5 3 2.9 14 0154809 E500M3.5NO6
40.70 53 14 4.00 3.15 6 3 3.3 14 0154786 E500M4NO1
40.70 53 14 4.00 3.15 6 3 3.3 14 0094648 E500M4NO2
40.70 53 14 4.00 3.15 6 3 3.3 14 0094655 E500M4NO3
40.70 53 14 4.00 3.15 6 3 3.3 14 0094662 E500M4NO6
40.75 53 14 4.00 3.15 6 3 3.25 14 0160213 E500M4X.75NO1
40.75 53 14 4.00 3.15 6 3 3.25 14 0160220 E500M4X.75NO2
40.75 53 14 4.00 3.15 6 3 3.25 14 0160237 E500M4X.75NO3
4.5 0.75 53 9.5 4.50 3.55 6 3 3.8 18 0154762 E500M4.5NO1
4.5 0.75 53 9.5 4.50 3.55 6 3 3.8 18 0094617 E500M4.5NO2
4.5 0.75 53 9.5 4.50 3.55 6 3 3.8 18 0094624 E500M4.5NO3
4.5 0.75 53 9.5 4.50 3.55 6 3 3.8 18 0154755 E500M4.5NO6
50.80 58 11 5.00 4.00 7 3 4.2 22 0154731 E500M5NO1
50.80 58 11 5.00 4.00 7 3 4.2 22 0094761 E500M5NO2
50.80 58 11 5.00 4.00 7 3 4.2 22 0094778 E500M5NO3
50.80 58 11 5.00 4.00 7 3 4.2 22 0154724 E500M5NO6
50.90 58 11 5.00 4.00 7 3 4.1 22 0159958 E500M5X.9NO1
50.90 58 11 5.00 4.00 7 3 4.1 22 0159965 E500M5X.9NO2
50.90 58 11 5.00 4.00 7 3 4.1 22 0159972 E500M5X.9NO3
50.90 58 11 5.00 4.00 7 3 4.1 22 0159989 E500M5X.9NO6
5.5 0.90 62 12 5.00 4.00 7 3 4.6 21 0159996 E500M5.5X.9NO1
5.5 0.90 62 12 5.00 4.00 7 3 4.6 21 0160008 E500M5.5X.9NO2
5.5 0.90 62 12 5.00 4.00 7 3 4.6 21 0160015 E500M5.5X.9NO3
5.5 0.90 62 12 5.00 4.00 7 3 4.6 21 0160022 E500M5.5X.9NO6
61.00 66 13 6.30 5.00 8 3 5 26 0094808 E500M6NO1
61.00 66 13 6.30 5.00 8 3 5 26 0094815 E500M6NO2
61.00 66 13 6.30 5.00 8 3 5 26 0094822 E500M6NO3
61.00 66 13 6.30 5.00 8 3 5 26 0154700 E500M6NO6
71.00 66 13 7.10 5.60 8 3 6 26 0154687 E500M7NO1
71.00 66 13 7.10 5.60 8 3 6 26 0139967 E500M7NO2
71.00 66 13 7.10 5.60 8 3 6 26 0094846 E500M7NO3
71.00 66 13 7.10 5.60 8 3 6 26 0094853 E500M7NO6
81.25 72 16 8.00 6.30 9 3 6.8 29 0154663 E500M8NO1
81.25 72 16 8.00 6.30 9 3 6.8 29 0094877 E500M8NO2
81.25 72 16 8.00 6.30 9 3 6.8 29 0094884 E500M8NO3
81.25 72 16 8.00 6.30 9 3 6.8 29 0094891 E500M8NO6
91.25 72 16 9.00 7.10 10 3 7.8 29 0154649 E500M9NO1
91.25 72 16 9.00 7.10 10 3 7.8 29 0152119 E500M9NO2
91.25 72 16 9.00 7.10 10 3 7.8 29 0094914 E500M9NO3
91.25 72 16 9.00 7.10 10 3 7.8 29 0154632 E500M9NO6
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0153246 E500M10NO1
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0093979 E500M10NO2
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
246 www.precisiondormer.com
E500
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0093986 E500M10NO3
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0154618 E500M10NO6
11 1.50 85 19 8.00 6.30 9 3 9.5 0154595 E500M11NO1
11 1.50 85 19 8.00 6.30 9 3 9.5 0094006 E500M11NO2
11 1.50 85 19 8.00 6.30 9 3 9.5 0094013 E500M11NO3
11 1.50 85 19 8.00 6.30 9 3 9.5 0154588 E500M11NO6
11 1.50 85 19 8.00 6.30 9 3 9.5 0094020 E500M11NO8
12 1.75 89 22 9.00 7.10 10 3 10.3 0094037 E500M12NO2
12 1.75 89 22 9.00 7.10 10 3 10.3 0094044 E500M12NO3
12 1.75 89 22 9.00 7.10 10 3 10.3 0094051 E500M12NO6
14 2.00 95 24 11.20 9.00 12 4 12 0152980 E500M14NO1
14 2.00 95 24 11.20 9.00 12 4 12 0094075 E500M14NO2
14 2.00 95 24 11.20 9.00 12 4 12 0094082 E500M14NO3
14 2.00 95 24 11.20 9.00 12 4 12 0154540 E500M14NO6
16 2.00 102 24 12.50 10.00 13 4 14 0154526 E500M16NO1
16 2.00 102 24 12.50 10.00 13 4 14 0094105 E500M16NO2
16 2.00 102 24 12.50 10.00 13 4 14 0094112 E500M16NO3
16 2.00 102 24 12.50 10.00 13 4 14 0154519 E500M16NO6
18 2.50 112 29 14.00 11.20 14 4 15.5 0154496 E500M18NO1
18 2.50 112 29 14.00 11.20 14 4 15.5 0094136 E500M18NO2
18 2.50 112 29 14.00 11.20 14 4 15.5 0094143 E500M18NO3
18 2.50 112 29 14.00 11.20 14 4 15.5 0154489 E500M18NO6
20 2.50 112 29 14.00 11.20 14 4 17.5 0154465 E500M20NO1
20 2.50 112 29 14.00 11.20 14 4 17.5 0150719 E500M20NO2
20 2.50 112 29 14.00 11.20 14 4 17.5 0094297 E500M20NO3
20 2.50 112 29 14.00 11.20 14 4 17.5 0154458 E500M20NO6
22 2.50 118 29 16.00 12.50 16 4 19.5 0154434 E500M22NO1
22 2.50 118 29 16.00 12.50 16 4 19.5 0094310 E500M22NO2
22 2.50 118 29 16.00 12.50 16 4 19.5 0094327 E500M22NO3
22 2.50 118 29 16.00 12.50 16 4 19.5 0154427 E500M22NO6
24 3.00 130 35 18.00 14.00 18 4 21 0154403 E500M24NO1
24 3.00 130 35 18.00 14.00 18 4 21 0094341 E500M24NO2
24 3.00 130 35 18.00 14.00 18 4 21 0094358 E500M24NO3
24 3.00 130 35 18.00 14.00 18 4 21 0154397 E500M24NO6
27 3.00 135 35 20.00 16.00 20 4 24 0154366 E500M27NO1
27 3.00 135 35 20.00 16.00 20 4 24 0094365 E500M27NO2
27 3.00 135 35 20.00 16.00 20 4 24 0094372 E500M27NO3
30 3.50 138 41 20.00 16.00 20 4 26.5 0154359 E500M30NO1
30 3.50 138 41 20.00 16.00 20 4 26.5 0094488 E500M30NO2
30 3.50 138 41 20.00 16.00 20 4 26.5 0094495 E500M30NO3
33 3.50 151 41 22.40 18.00 22 4 29.5 0154342 E500M33NO1
33 3.50 151 41 22.40 18.00 22 4 29.5 0152225 E500M33NO2
33 3.50 151 41 22.40 18.00 22 4 29.5 0094525 E500M33NO3
36 4.00 162 47 25.00 20.00 24 4 32 0154335 E500M36NO1
36 4.00 162 47 25.00 20.00 24 4 32 0094549 E500M36NO2
36 4.00 162 47 25.00 20.00 24 4 32 0094556 E500M36NO3
39 4.00 170 47 28.00 22.40 26 4 35 0154328 E500M39NO1
39 4.00 170 47 28.00 22.40 26 4 35 0152232 E500M39NO2
39 4.00 170 47 28.00 22.40 26 4 35 0094587 E500M39NO3
42 4.50 170 53 28.00 22.40 26 6 37.5 0154311 E500M42NO1
42 4.50 170 53 28.00 22.40 26 6 37.5 0152249 E500M42NO2
42 4.50 170 53 28.00 22.40 26 6 37.5 0094686 E500M42NO3
45 4.50 187 54 31.50 25.00 28 6 40.5 0154304 E500M45NO1
45 4.50 187 54 31.50 25.00 28 6 40.5 0152256 E500M45NO2
45 4.50 187 54 31.50 25.00 28 6 40.5 0094709 E500M45NO3
48 5.00 187 60 31.50 25.00 28 6 43 0154298 E500M48NO1
48 5.00 187 60 31.50 25.00 28 6 43 0152263 E500M48NO2
48 5.00 187 60 31.50 25.00 28 6 43 0094730 E500M48NO3
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 247
www.precisiondormer.com
Ɣ Tarauds machine
E500 - E501
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
52 5.00 200 60 35.50 28.00 31 6 47 0153253 E500M52NO1
52 5.00 200 60 35.50 28.00 31 6 47 0152270 E500M52NO2
52 5.00 200 60 35.50 28.00 31 6 47 0094792 E500M52NO3
56 5.50 200 60 35.50 28.00 31 6 50.5 0122457 E500M56NO3
E501
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
30.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0159828 E501M3NO1
30.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0095058 E501M3NO2
30.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0095065 E501M3NO3
40.70 53 14 4.00 3.15 6 3 3.3 14 0159835 E501M4NO1
40.70 53 14 4.00 3.15 6 3 3.3 14 0095072 E501M4NO2
40.70 53 14 4.00 3.15 6 3 3.3 14 0095089 E501M4NO3
50.80 58 11 5.00 4.00 7 3 4.2 22 0159842 E501M5NO1
50.80 58 11 5.00 4.00 7 3 4.2 22 0095096 E501M5NO2
50.80 58 11 5.00 4.00 7 3 4.2 22 0095102 E501M5NO3
61.00 66 13 6.30 5.00 8 3 5 26 0159859 E501M6NO1
61.00 66 13 6.30 5.00 8 3 5 26 0095119 E501M6NO2
61.00 66 13 6.30 5.00 8 3 5 26 0095126 E501M6NO3
81.25 72 16 8.00 6.30 9 3 6.8 29 0159866 E501M8NO1
81.25 72 16 8.00 6.30 9 3 6.8 29 0095133 E501M8NO2
81.25 72 16 8.00 6.30 9 3 6.8 29 0095140 E501M8NO3
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0159873 E501M10NO1
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0094938 E501M10NO2
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0094945 E501M10NO3
12 1.75 89 22 9.00 7.10 10 3 10.3 0159880 E501M12NO1
12 1.75 89 22 9.00 7.10 10 3 10.3 0094952 E501M12NO2
12 1.75 89 22 9.00 7.10 10 3 10.3 0094969 E501M12NO3
14 2.00 95 24 11.20 9.00 12 4 12 0159897 E501M14NO1
14 2.00 95 24 11.20 9.00 12 4 12 0094976 E501M14NO2
14 2.00 95 24 11.20 9.00 12 4 12 0094983 E501M14NO3
16 2.00 102 24 12.50 10.00 13 4 14 0159903 E501M16NO1
16 2.00 102 24 12.50 10.00 13 4 14 0094990 E501M16NO2
16 2.00 102 24 12.50 10.00 13 4 14 0095003 E501M16NO3
18 2.50 112 29 14.00 11.20 14 4 15.5 0152423 E501M18NO2
18 2.50 112 29 14.00 11.20 14 4 15.5 0095010 E501M18NO3
20 2.50 112 29 14.00 11.20 14 4 17.5 0159910 E501M20NO1
20 2.50 112 29 14.00 11.20 14 4 17.5 0095027 E501M20NO2
20 2.50 112 29 14.00 11.20 14 4 17.5 0095034 E501M20NO3
22 2.50 118 29 16.00 12.50 16 4 19.5 0152430 E501M22NO2
22 2.50 118 29 16.00 12.50 16 4 19.5 0122495 E501M22NO3
24 3.00 130 35 18.00 14.00 18 4 21 0152447 E501M24NO2
24 3.00 130 35 18.00 14.00 18 4 21 0095041 E501M24NO3
ƔMachine Tap ƔMachos de máquina
ƔStraight Flute, Left Hand
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
248 www.precisiondormer.com
E513
Ɣ
MF P
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
30.35 48 12.5 3.15 2.50 5 3 2.65 12.5 0160039 E513M3X.35NO1
30.35 48 12.5 3.15 2.50 5 3 2.65 12.5 0160046 E513M3X.35NO2
30.35 48 12.5 3.15 2.50 5 3 2.65 12.5 0096567 E513M3X.35NO3
3.5 0.35 48 12.5 3.15 2.50 5 3 3.2 12.5 0343111 E513M3.5X.35NO3
40.50 53 14 4.00 3.15 6 3 3.5 14 0156766 E513M4X.5NO1
40.50 53 14 4.00 3.15 6 3 3.5 14 0152454 E513M4X.5NO2
40.50 53 14 4.00 3.15 6 3 3.5 14 0096680 E513M4X.5NO3
50.50 58 11 5.00 4.00 7 3 4.5 22 0156728 E513M5X.5NO1
50.50 58 11 5.00 4.00 7 3 4.5 22 0096727 E513M5X.5NO2
50.50 58 11 5.00 4.00 7 3 4.5 22 0096734 E513M5X.5NO3
50.75 58 11 5.00 4.00 7 3 4.3 22 0157046 E513M5X.75NO1
50.75 58 11 5.00 4.00 7 3 4.3 22 0156773 E513M5X.75NO2
50.75 58 11 5.00 4.00 7 3 4.3 22 0123027 E513M5X.75NO3
60.50 66 13 6.30 5.00 8 3 5.5 26 0156780 E513M6X.5NO1
60.50 66 13 6.30 5.00 8 3 5.5 26 0156797 E513M6X.5NO2
60.50 66 13 6.30 5.00 8 3 5.5 26 0123034 E513M6X.5NO3
60.75 66 13 6.30 5.00 8 3 5.3 26 0156803 E513M6X.75NO1
60.75 66 13 6.30 5.00 8 3 5.3 26 0152461 E513M6X.75NO2
60.75 66 13 6.30 5.00 8 3 5.3 26 0096765 E513M6X.75NO3
70.75 66 13 7.10 5.60 8 3 6.3 26 0160053 E513M7X.75NO1
70.75 66 13 7.10 5.60 8 3 6.3 26 0096789 E513M7X.75NO2
70.75 66 13 7.10 5.60 8 3 6.3 26 0096796 E513M7X.75NO3
80.50 72 16 8.00 6.30 9 3 7.5 29 0160060 E513M8X.5NO1
80.50 72 16 8.00 6.30 9 3 7.5 29 0160077 E513M8X.5NO2
80.50 72 16 8.00 6.30 9 3 7.5 29 0123058 E513M8X.5NO3
80.75 72 16 8.00 6.30 9 3 7.3 29 0157053 E513M8X.75NO1
80.75 72 16 8.00 6.30 9 3 7.3 29 0152478 E513M8X.75NO2
80.75 72 16 8.00 6.30 9 3 7.3 29 0096802 E513M8X.75NO3
81.00 72 16 8.00 6.30 9 3 7 29 0157060 E513M8X1.0NO1
81.00 72 16 8.00 6.30 9 3 7 29 0152485 E513M8X1.0NO2
81.00 72 16 8.00 6.30 9 3 7 29 0096826 E513M8X1.0NO3
90.75 72 16 9.00 7.10 10 3 8.3 29 0343128 E513M9X.75NO3
91.00 72 16 9.00 7.10 10 3 8 29 0159644 E513M9X1.0NO1
ƔMachine Tap, Straight Flute Ɣ Tarauds machine ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 249
www.precisiondormer.com
E513
MF P
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
91.00 72 16 9.00 7.10 10 3 8 29 0155752 E513M9X1.0NO2
91.00 72 16 9.00 7.10 10 3 8 29 0096833 E513M9X1.0NO3
10 0.50 80 18 10.00 8.00 11 3 9.5 34 0343135 E513M10X.5NO3
10 0.75 80 18 10.00 8.00 11 3 9.3 34 0160084 E513M10X.75NO1
10 0.75 80 18 10.00 8.00 11 3 9.3 34 0160091 E513M10X.75NO2
10 0.75 80 18 10.00 8.00 11 3 9.3 34 0123065 E513M10X.75NO3
10 1.00 80 18 10.00 8.00 11 3 9 34 0157077 E513M10X1.0NO1
10 1.00 80 18 10.00 8.00 11 3 9 34 0152492 E513M10X1.0NO2
10 1.00 80 18 10.00 8.00 11 3 9 34 0096086 E513M10X1.0NO3
10 1.00 80 18 10.00 8.00 11 3 9 34 0157084 E513M10X1.0NO6
10 1.25 80 18 10.00 8.00 11 3 8.8 34 0157091 E513M10X1.25NO1
10 1.25 80 18 10.00 8.00 11 3 8.8 34 0152508 E513M10X1.25NO2
10 1.25 80 18 10.00 8.00 11 3 8.8 34 0096079 E513M10X1.25NO3
10 1.25 80 18 10.00 8.00 11 3 8.8 34 0157107 E513M10X1.25NO6
11 0.75 85 19 8.00 6.30 9 3 10.3 0160107 E513M11X.75NO1
11 0.75 85 19 8.00 6.30 9 3 10.3 0160114 E513M11X.75NO2
11 0.75 85 19 8.00 6.30 9 3 10.3 0123072 E513M11X.75NO3
11 1.00 85 19 8.00 6.30 9 3 10 0159651 E513M11X1.0NO1
11 1.00 85 19 8.00 6.30 9 3 10 0096093 E513M11X1.0NO2
11 1.00 85 19 8.00 6.30 9 3 10 0096109 E513M11X1.0NO3
11 1.25 85 19 8.00 6.30 9 3 9.8 0343142 E513M11X1.25NO3
12 0.75 89 22 9.00 7.10 10 3 11.3 0343166 E513M12X.75NO3
12 1.00 89 22 9.00 7.10 10 3 11 0157114 E513M12X1.0NO1
12 1.00 89 22 9.00 7.10 10 3 11 0152515 E513M12X1.0NO2
12 1.00 89 22 9.00 7.10 10 3 11 0096154 E513M12X1.0NO3
12 1.25 89 22 9.00 7.10 10 3 10.8 0157121 E513M12X1.25NO1
12 1.25 89 22 9.00 7.10 10 3 10.8 0152522 E513M12X1.25NO2
12 1.25 89 22 9.00 7.10 10 3 10.8 0096116 E513M12X1.25NO3
12 1.25 89 22 9.00 7.10 10 3 10.8 0157138 E513M12X1.25NO6
12 1.50 89 22 9.00 7.10 10 3 10.5 0157145 E513M12X1.5NO1
12 1.50 89 22 9.00 7.10 10 3 10.5 0096130 E513M12X1.5NO2
12 1.50 89 22 9.00 7.10 10 3 10.5 0096147 E513M12X1.5NO3
12 1.50 89 22 9.00 7.10 10 3 10.5 0157152 E513M12X1.5NO6
13 1.50 89 22 9.00 7.10 10 3 11.5 0343173 E513M13X1.5NO3
14 1.00 95 24 11.20 9.00 12 4 13 0156810 E513M14X1.0NO1
14 1.00 95 24 11.20 9.00 12 4 13 0152539 E513M14X1.0NO2
14 1.00 95 24 11.20 9.00 12 4 13 0096185 E513M14X1.0NO3
14 1.25 95 24 11.20 9.00 12 4 12.8 0156827 E513M14X1.25NO1
14 1.25 95 24 11.20 9.00 12 4 12.8 0152546 E513M14X1.25NO2
14 1.25 95 24 11.20 9.00 12 4 12.8 0096161 E513M14X1.25NO3
14 1.25 95 24 11.20 9.00 12 4 12.8 0156834 E513M14X1.25NO6
14 1.50 95 24 11.20 9.00 12 4 12.5 0156841 E513M14X1.5NO1
14 1.50 95 24 11.20 9.00 12 4 12.5 0152553 E513M14X1.5NO2
14 1.50 95 24 11.20 9.00 12 4 12.5 0096178 E513M14X1.5NO3
14 1.50 95 24 11.20 9.00 12 4 12.5 0156858 E513M14X1.5NO6
15 1.50 95 24 11.20 9.00 12 4 13.5 0096192 E513M15X1.5NO2
15 1.50 95 24 11.20 9.00 12 4 13.5 0096208 E513M15X1.5NO3
16 1.00 102 24 12.50 10.00 13 4 15 0156865 E513M16X1.0NO1
16 1.00 102 24 12.50 10.00 13 4 15 0152560 E513M16X1.0NO2
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
250 www.precisiondormer.com
E513
MF P
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
16 1.00 102 24 12.50 10.00 13 4 15 0096246 E513M16X1.0NO3
16 1.25 102 24 12.50 10.00 13 4 14.8 0343203 E513M16X1.25NO3
16 1.50 102 24 12.50 10.00 13 4 14.5 0156872 E513M16X1.5NO1
16 1.50 102 24 12.50 10.00 13 4 14.5 0152577 E513M16X1.5NO2
16 1.50 102 24 12.50 10.00 13 4 14.5 0096222 E513M16X1.5NO3
16 1.50 102 24 12.50 10.00 13 4 14.5 0156889 E513M16X1.5NO6
18 1.00 112 29 14.00 11.20 14 4 17 0156896 E513M18X1.0NO1
18 1.00 112 29 14.00 11.20 14 4 17 0096277 E513M18X1.0NO2
18 1.00 112 29 14.00 11.20 14 4 17 0096284 E513M18X1.0NO3
18 1.50 112 29 14.00 11.20 14 4 16.5 0156902 E513M18X1.5NO1
18 1.50 112 29 14.00 11.20 14 4 16.5 0152584 E513M18X1.5NO2
18 1.50 112 29 14.00 11.20 14 4 16.5 0096260 E513M18X1.5NO3
18 1.50 112 29 14.00 11.20 14 4 16.5 0156919 E513M18X1.5NO6
18 2.00 112 29 14.00 11.20 14 4 16 0156926 E513M18X2.0NO1
18 2.00 112 29 14.00 11.20 14 4 16 0096307 E513M18X2.0NO2
18 2.00 112 29 14.00 11.20 14 4 16 0096314 E513M18X2.0NO3
20 1.00 112 29 14.00 11.20 14 4 19 0156933 E513M20X1.0NO1
20 1.00 112 29 14.00 11.20 14 4 19 0096345 E513M20X1.0NO2
20 1.00 112 29 14.00 11.20 14 4 19 0096352 E513M20X1.0NO3
20 1.50 112 29 14.00 11.20 14 4 18.5 0156940 E513M20X1.5NO1
20 1.50 112 29 14.00 11.20 14 4 18.5 0152591 E513M20X1.5NO2
20 1.50 112 29 14.00 11.20 14 4 18.5 0096338 E513M20X1.5NO3
20 1.50 112 29 14.00 11.20 14 4 18.5 0156957 E513M20X1.5NO6
20 2.00 112 29 14.00 11.20 14 4 18 0156964 E513M20X2.0NO1
20 2.00 112 29 14.00 11.20 14 4 18 0096376 E513M20X2.0NO2
20 2.00 112 29 14.00 11.20 14 4 18 0096383 E513M20X2.0NO3
22 1.00 118 29 16.00 12.50 16 4 21 0096406 E513M22X1.0NO2
22 1.00 118 29 16.00 12.50 16 4 21 0096413 E513M22X1.0NO3
22 1.50 118 29 16.00 12.50 16 4 20.5 0156971 E513M22X1.5NO1
22 1.50 118 29 16.00 12.50 16 4 20.5 0152607 E513M22X1.5NO2
22 1.50 118 29 16.00 12.50 16 4 20.5 0096390 E513M22X1.5NO3
22 2.00 118 29 16.00 12.50 16 4 20 0156988 E513M22X2.0NO1
22 2.00 118 29 16.00 12.50 16 4 20 0096420 E513M22X2.0NO2
22 2.00 118 29 16.00 12.50 16 4 20 0096437 E513M22X2.0NO3
24 1.00 130 35 18.00 14.00 18 4 23 0096475 E513M24X1.0NO2
24 1.00 130 35 18.00 14.00 18 4 23 0096482 E513M24X1.0NO3
24 1.50 130 35 18.00 14.00 18 4 22.5 0156995 E513M24X1.5NO1
24 1.50 130 35 18.00 14.00 18 4 22.5 0152614 E513M24X1.5NO2
24 1.50 130 35 18.00 14.00 18 4 22.5 0096451 E513M24X1.5NO3
24 2.00 130 35 18.00 14.00 18 4 22 0157008 E513M24X2.0NO1
24 2.00 130 35 18.00 14.00 18 4 22 0096499 E513M24X2.0NO2
24 2.00 130 35 18.00 14.00 18 4 22 0096505 E513M24X2.0NO3
25 1.50 130 35 18.00 14.00 18 4 23.5 0157015 E513M25X1.5NO1
25 1.50 130 35 18.00 14.00 18 4 23.5 0152621 E513M25X1.5NO2
25 1.50 130 35 18.00 14.00 18 4 23.5 0096512 E513M25X1.5NO3
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 251
www.precisiondormer.com
E513
MF P
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
25 1.50 130 35 18.00 14.00 18 4 23.5 0157022 E513M25X1.5NO6
26 1.50 130 35 18.00 14.00 18 4 24.5 0096529 E513M26X1.5NO2
26 1.50 130 35 18.00 14.00 18 4 24.5 0096536 E513M26X1.5NO3
27 1.50 135 35 20.00 16.00 20 4 25.5 0155738 E513M27X1.5NO2
27 1.50 135 35 20.00 16.00 20 4 25.5 0123010 E513M27X1.5NO3
27 2.00 135 35 20.00 16.00 20 4 25 0123041 E513M27X2.0NO3
28 1.50 138 35 20.00 16.00 20 4 26.5 0096543 E513M28X1.5NO2
28 1.50 138 35 20.00 16.00 20 4 26.5 0096550 E513M28X1.5NO3
30 1.50 138 41 20.00 16.00 20 4 28.5 0096574 E513M30X1.5NO2
30 1.50 138 41 20.00 16.00 20 4 28.5 0096581 E513M30X1.5NO3
30 2.00 138 41 20.00 16.00 20 4 28 0155721 E513M30X2.0NO2
30 2.00 138 41 20.00 16.00 20 4 28 0123003 E513M30X2.0NO3
32 1.50 151 41 22.40 18.00 22 4 30.5 0157039 E513M32X1.5NO1
32 1.50 151 41 22.40 18.00 22 4 30.5 0155578 E513M32X1.5NO2
32 1.50 151 41 22.40 18.00 22 4 30.5 0096598 E513M32X1.5NO3
33 2.00 151 41 22.40 18.00 22 4 31 0096604 E513M33X2.0NO2
33 2.00 151 41 22.40 18.00 22 4 31 0096611 E513M33X2.0NO3
35 1.50 162 47 25.00 20.00 24 4 33.5 0096628 E513M35X1.5NO2
35 1.50 162 47 25.00 20.00 24 4 33.5 0096635 E513M35X1.5NO3
36 1.50 162 47 25.00 20.00 24 4 34.5 0343302 E513M36X1.5NO3
36 2.00 162 47 25.00 20.00 24 4 34 0152638 E513M36X2.0NO2
36 2.00 162 47 25.00 20.00 24 4 34 0096642 E513M36X2.0NO3
36 3.00 162 47 25.00 20.00 24 4 33 0096659 E513M36X3.0NO2
36 3.00 162 47 25.00 20.00 24 4 33 0096666 E513M36X3.0NO3
39 3.00 170 47 28.00 22.40 26 4 36 0152645 E513M39X3.0NO2
39 3.00 170 47 28.00 22.40 26 4 36 0096673 E513M39X3.0NO3
40 1.50 170 53 28.00 22.40 26 6 38.5 0155691 E513M40X1.5NO2
40 1.50 170 53 28.00 22.40 26 6 38.5 0096697 E513M40X1.5NO3
42 1.50 170 53 28.00 22.40 26 6 40.5 0155684 E513M42X1.5NO2
42 1.50 170 53 28.00 22.40 26 6 40.5 0096703 E513M42X1.5NO3
42 3.00 170 53 28.00 22.40 26 6 39 0343319 E513M42X3.0NO3
45 1.50 187 54 31.50 25.00 28 6 43.5 0155677 E513M45X1.5NO2
45 1.50 187 54 31.50 25.00 28 6 43.5 0096710 E513M45X1.5NO3
48 1.50 187 60 31.50 25.00 28 6 46.5 0343333 E513M48X1.5NO3
48 2.00 187 60 31.50 25.00 28 6 46 0343340 E513M48X2.0NO3
48 3.00 187 60 31.50 25.00 28 6 45 0343357 E513M48X3.0NO3
50 1.50 187 60 31.50 25.00 28 6 48.5 0155660 E513M50X1.5NO2
50 1.50 187 60 31.50 25.00 28 6 48.5 0096758 E513M50X1.5NO3
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
252 www.precisiondormer.com
Ɣ MTT-X Tarauds machine
E025
Ŷ
Ɣ
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
Inch Stock #
EDP #
or
e-Code
632 2“ 0.2610 0.1410 0.1100 2 H2 N36 2.85 0.5938 0581070 E0256-32
832 2.1/8 0.2484 0.1680 0.1310 2 H2 N29 3.50 0.6526 0581087 E0258-32
10 24 2.3/8 0.4303 0.1940 0.1520 2 H3 N25 3.90 0.8434 0581094 E02510-24
12 24 2.3/8 0.4173 0.2200 0.1650 2 H3 N16 4.50 0.8848 0581100 E02512-24
1/4 20 2.1/2 0.5075 0.2550 0.1910 2 H3 N7 5.10 1.0073 0581117 E0251/4
1/4 20 2.1/2 0.5075 0.2550 0.1910 3 H3 N7 5.10 1.0073 0581124 E0251/43FL
5/16 18 2.23/32 0.5939 0.3180 0.2380 2 H3 F 6.60 1.1891 0581131 E0255/16
5/16 18 2.23/32 0.5939 0.3180 0.2380 3 H3 F 6.60 1.1891 0581148 E0255/163FL
3/8 16 2.15/16 0.6020 0.3810 0.2860 2 H3 5/16 8.00 1.2915 0581155 E0253/8
3/8 16 2.15/16 0.6020 0.3810 0.2860 3 H3 5/16 8.00 1.2915 0581162 E0253/83FL
7/16 14 3.5/32 0.9055 0.3230 0.2420 3 H3 U 9.40 0581179 E0257/16
1/2 13 3.3/8 0.9055 0.3670 0.2750 2 H3 27/64 10.80 0581186 E0251/2
1/2 13 3.3/8 0.9055 0.3670 0.2750 3 H3 27/64 10.80 0581193 E0251/23FL
9/16 12 3.19/32 0.9843 0.4290 0.3220 3 H3 31/64 12.20 0581209 E0259/16
5/8 11 3.13/16 0.9843 0.4800 0.3600 3 H3 17/32 13.50 0581216 E0255/8
3/4 10 4.1/4 1.1614 0.5900 0.4420 3 H4 21/32 16.50 0581223 E0253/4
7/8 9 4.11/16 1.1614 0.6970 0.5230 3 H4 49/64 19.50 0581230 E0257/8
1“ 8 5.1/8 1.3976 0.8000 0.6000 3 H4 7/8 22.25 0581247 E0251
ƔMachine Tap MTT-X, Spiral Point ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 253
www.precisiondormer.com
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
mm Stock #
EDP #
or
e-Code
640 2“ 0.2610 0.1410 0.1100 2 H2 N33 2.95 0.5938 0581957 E0356-40
836 2.1/8 0.2484 0.1680 0.1310 2 H2 N29 3.50 0.6526 0581964 E0358-36
10 32 2.3/8 0.4303 0.1940 0.1520 2 H2 N21 4.10 0.8434 0581971 E03510-32
12 28 2.3/8 0.4173 0.2200 0.1650 2 H3 N14 4.70 0.8848 0581988 E03512-28
1/4 28 2.1/2 0.5075 0.2550 0.1910 2 H3 N3 5.50 1.0073 0581995 E0351/4
1/4 28 2.1/2 0.5075 0.2550 0.1910 3 H3 N3 5.50 1.0073 0582008 E0351/43FL
5/16 24 2.23/32 0.5939 0.3180 0.2380 2 H3 I 6.90 1.1891 0582015 E0355/16
5/16 24 2.23/32 0.5939 0.3180 0.2380 3 H3 I 6.90 1.1891 0582022 E0355/163FL
3/8 24 2.15/16 0.6020 0.3810 0.2860 2 H3 Q 8.50 1.2915 0582039 E0353/8
3/8 24 2.15/16 0.6020 0.3810 0.2860 3 H3 Q 8.50 1.2915 0582046 E0353/83FL
7/16 20 3.5/32 0.9055 0.3230 0.2420 3 H3 25/64 9.90 0582053 E0357/163FL
1/2 20 3.3/8 0.9055 0.3670 0.2750 2 H3 29/64 11.50 0582060 E0351/2
1/2 20 3.3/8 0.9055 0.3670 0.2750 3 H3 29/64 11.50 0582077 E0351/23FL
9/16 18 3.19/32 0.9843 0.4290 0.3220 3 H3 33/64 12.90 0582084 E0359/16
5/8 18 3.13/16 0.9843 0.4800 0.3600 3 H3 37/64 14.50 0582091 E0355/8
3/4 16 4.1/4 1.1614 0.5900 0.4420 3 H3 11/16 17.50 0582107 E0353/4
7/8 14 4.11/16 1.1614 0.6970 0.5230 3 H4 13/16 20.40 0582114 E0357/8
1“ 12 5.1/8 1.3976 0.8000 0.6000 3 H4 59/64 23.25 0582121 E0351-12
1“ 14 5.1/8 1.3976 0.8000 0.6000 3 H4 59/64 23.50 0582138 E0351-14
ƔMachine Tap MTT-X, Spiral Point ƔMTT-X Machos de máquina
E035
Ŷ
Ɣ
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
254 www.precisiondormer.com
E026
Ŷ
Ɣ
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
Inch Stock #
EDP #
or
e-Code
256 1.3/4 0.3140 0.1410 0.1100 2 H2 N50 1.80 0.3140 0583203 E0262-56
440 1.7/8 0.6091 0.1410 0.1100 2 H2 N43 2.35 0.6091 0581254 E0264-40
540 1.15/16 0.7404 0.1410 0.1100 2 H2 N38 2.65 0.7404 0581261 E0265-40
632 2“ 0.2610 0.1410 0.1100 2 H2 N36 2.85 0.5938 0581278 E0266-32
832 2.1/8 0.2484 0.1680 0.1310 2 H2 N29 3.50 0.6526 0581285 E0268-32
10 24 2.3/8 0.4303 0.1940 0.1520 2 H3 N25 3.90 0.8434 0581292 E02610-24
12 24 2.3/8 0.4173 0.2200 0.1650 2 H3 N16 4.50 0.8848 0581308 E02612-24
1/4 20 2.1/2 0.5075 0.2550 0.1910 2 H3 N7 5.10 1.0073 0581315 E0261/4
1/4 20 2.1/2 0.5075 0.2550 0.1910 3 H3 N7 5.10 1.0073 0581339 E0261/43FL
1/4 20 2.1/2 0.5075 0.2550 0.1910 3 H11 7 5.10 1.0073 0581322 E0261/4H11 1)
5/16 18 2.23/32 0.5939 0.3180 0.2380 2 H3 F 6.60 1.1891 0581346 E0265/16
5/16 18 2.23/32 0.5939 0.3180 0.2380 3 H3 F 6.60 1.1891 0581360 E0265/163FL
5/16 18 2.23/32 0.5939 0.3180 0.2380 3 H11 F 6.60 1.1891 0581353 E0265/16H11 1)
3/8 16 2.15/16 0.6020 0.3810 0.2860 2 H3 5/16 8.00 1.2915 0581377 E0263/8
3/8 16 2.15/16 0.6020 0.3810 0.2860 3 H3 5/16 8.00 1.2915 0581391 E0263/83FL
3/8 16 2.15/16 0.6020 0.3810 0.2860 3 H11 5/16 8.00 1.2915 0581384 E0263/8H11 1)
7/16 14 3.5/32 0.9055 0.3230 0.2420 3 H3 U 9.40 0581407 E0267/16
1/2 13 3.3/8 0.9055 0.3670 0.2750 2 H3 27/64 10.80 0581414 E0261/2
1/2 13 3.3/8 0.9055 0.3670 0.2750 3 H3 27/64 10.80 0581438 E0261/23FL
1/2 13 3.3/8 0.9055 0.3670 0.2750 3 H11 27/64 10.80 0581421 E0261/2H11 1)
9/16 12 3.19/32 0.9843 0.4290 0.3220 3 H3 31/64 12.20 0581445 E0269/16
5/8 11 3.13/16 0.9843 0.4800 0.3600 3 H3 17/32 13.50 0581469 E0265/8
5/8 11 3.13/16 0.9843 0.4800 0.3600 3 H11 17/32 13.50 0581452 E0265/8H11 1)
3/4 10 4.1/4 1.1614 0.5900 0.4420 3 H4 21/32 16.50 0581476 E0263/4
7/8 9 4.11/16 1.1614 0.6970 0.5230 3 H4 49/64 19.50 0581483 E0267/8
1“ 8 5.1/8 1.3976 0.8000 0.6000 3 H4 7/8 22.25 0581490 E0261
1) Oversize +.005”, not 3B
ƔMachine Tap MTT-X, Spiral Point Ɣ MTT-X Tarauds machine ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 255
www.precisiondormer.com
E036
Ŷ
Ɣ
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
mm Stock #
EDP #
or
e-Code
10 32 2.3/8 0.4303 0.1940 0.1520 2 H2 N21 4.10 0.8434 0582145 E03610-32
12 28 2.3/8 0.4173 0.2200 0.1650 2 H3 N14 4.70 0.8848 0582152 E03612-28
1/4 28 2.1/2 0.5075 0.2550 0.1910 2 H3 N3 5.50 1.0073 0582169 E0361/4
1/4 28 2.1/2 0.5075 0.2550 0.1910 3 H3 N3 5.50 1.0073 0582176 E0361/43FL
5/16 24 2.23/32 0.5939 0.3180 0.2380 2 H3 I 6.90 1.1891 0582183 E0365/16
5/16 24 2.23/32 0.5939 0.3180 0.2380 3 H3 I 6.90 1.1891 0582190 E0365/163FL
3/8 24 2.15/16 0.6020 0.3810 0.2860 2 H3 Q 8.50 1.2915 0582206 E0363/8
3/8 24 2.15/16 0.6020 0.3810 0.2860 3 H3 Q 8.50 1.2915 0582213 E0363/83FL
7/16 20 3.5/32 0.9055 0.3230 0.2420 3 H3 25/64 9.90 0582220 E0367/163FL
1/2 20 3.3/8 0.9055 0.3670 0.2750 2 H3 29/64 11.50 0582237 E0361/2
1/2 20 3.3/8 0.9055 0.3670 0.2750 3 H3 29/64 11.50 0582244 E0361/23FL
9/16 18 3.19/32 0.9843 0.4290 0.3220 3 H3 33/64 12.90 0582251 E0369/16
5/8 18 3.13/16 0.9843 0.4800 0.3600 3 H3 37/64 14.50 0582268 E0365/8
3/4 16 4.1/4 1.1614 0.5900 0.4420 3 H3 11/16 17.50 0582275 E0363/4
7/8 14 4.11/16 1.1614 0.6970 0.5230 3 H4 13/16 20.40 0582282 E0367/8
1“ 12 5.1/8 1.3976 0.8000 0.6000 3 H4 59/64 23.25 0582299 E0361-12
1“ 14 5.1/8 1.3976 0.8000 0.6000 3 H4 59/64 23.50 0582305 E0361-14
ƔMachine Tap MTT-X, Spiral Point Ɣ MTT-X Tarauds machine ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
256 www.precisiondormer.com
E005
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Stock #
EDP #
or
e-Code
40.70 2.1/8 0.2484 0.1680 0.1310 2 3.3 0.6526 N30 0580301 E005M4
40.70 2.1/8 0.2484 0.1680 0.1310 3 3.3 0.6526 N30 0580318 E005M43FL
50.80 2.3/8 0.4303 0.1940 0.1520 2 4.2 0.8434 N19 0580325 E005M5
50.80 2.3/8 0.4303 0.1940 0.1520 3 4.2 0.8434 N19 0580332 E005M53FL
61.00 2.1/2 0.5075 0.2550 0.1910 2 5.0 1.0073 N9 0580349 E005M6
61.00 2.1/2 0.5075 0.2550 0.1910 3 5.0 1.0073 N9 0580356 E005M63FL
81.25 2.23/32 0.5939 0.3180 0.2380 2 6.8 1.1891 H 0580363 E005M8
81.25 2.23/32 0.5939 0.3180 0.2380 3 6.8 1.1891 H 0580370 E005M83FL
10 1.50 2.15/16 0.6020 0.3810 0.2860 2 8.5 1.2915 Q 0580387 E005M10
10 1.50 2.15/16 0.6020 0.3810 0.2860 3 8.5 1.2915 Q 0580394 E005M103FL
12 1.75 3.3/8 0.9055 0.3670 0.2750 2 10.3 Y 0580400 E005M12
12 1.75 3.3/8 0.9055 0.3670 0.2750 3 10.3 Y 0580417 E005M123FL
14 2.00 3.19/32 0.9843 0.4290 0.3220 3 12.0 15/32 0580424 E005M14
16 2.00 3.13/16 0.9843 0.4800 0.3600 3 14.0 35/64 0580431 E005M16
18 2.50 4.1/32 1.1614 0.5420 0.4060 3 15.5 39/64 0580448 E005M18
20 2.50 4.15/32 1.1614 0.6520 0.4890 3 17.5 11/16 0580455 E005M20
Ŷ
Ɣ
ƔMachine Tap MTT-X, Spiral Point Ɣ MTT-X Tarauds machine ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 257
www.precisiondormer.com
E006
Ŷ
Ɣ
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Stock #
EDP #
or
e-Code
40.70 2.1/8 0.2484 0.1680 0.1310 2 3.3 0.6526 N30 0580462 E006M4
40.70 2.1/8 0.2484 0.1680 0.1310 3 3.3 0.6526 N30 0583180 E006M43FL
50.80 2.3/8 0.4303 0.1940 0.1520 2 4.2 0.8434 N19 0580479 E006M5
50.80 2.3/8 0.4303 0.1940 0.1520 3 4.2 0.8434 N19 0580486 E006M53FL
61.00 2.1/2 0.5075 0.2550 0.1910 2 5.0 1.0073 N9 0580493 E006M6
61.00 2.1/2 0.5075 0.2550 0.1910 3 5.0 1.0073 N9 0580509 E006M63FL
81.25 2.23/32 0.5939 0.3180 0.2380 2 6.8 1.1891 H 0580516 E006M8
81.25 2.23/32 0.5939 0.3180 0.2380 3 6.8 1.1891 H 0583197 E006M83FL
10 1.50 2.15/16 0.6020 0.3810 0.2860 2 8.5 1.2915 Q 0580523 E006M10
10 1.50 2.15/16 0.6020 0.3810 0.2860 3 8.5 1.2915 Q 0580530 E006M103FL
12 1.75 3.3/8 0.9055 0.3670 0.2750 2 10.3 Y 0580547 E006M12
12 1.75 3.3/8 0.9055 0.3670 0.2750 3 10.3 Y 0580554 E006M123FL
14 2.00 3.19/32 0.9843 0.4290 0.3220 3 12.0 15/32 0580561 E006M14
16 2.00 3.13/16 0.9843 0.4800 0.3600 3 14.0 35/64 0580578 E006M16
18 2.50 4.1/32 1.1614 0.5420 0.4060 3 15.5 39/64 0580585 E006M18
20 2.50 4.15/32 1.1614 0.6520 0.4890 3 17.5 11/16 0580592 E006M20
ƔMachine Tap MTT-X, Spiral Point Ɣ MTT-X Tarauds machine Ɣ MTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
258 www.precisiondormer.com
E015 - E016
E015
Ŷ
Ɣ
MF P
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Stock #
EDP #
or
e-Code
81.00 2.23/32 0.5939 0.3180 0.2380 3 7.0 1.1891 J 0580912 E015M8X1.0
10 1.00 2.15/16 0.6020 0.3810 0.2860 3 9.0 1.2915 T 0580929 E015M10X1.0
14 1.50 3.19/32 0.9843 0.4290 0.3220 3 12.5 31/64 0580936 E015M14X1.5
18 1.50 4.1/32 1.1614 0.5420 0.4060 3 16.5 41/64 0580943 E015M18X1.5
E016
Ŷ
Ɣ
MF P
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Stock #
EDP #
or
e-Code
81.00 2.23/32 0.5939 0.3180 0.2380 3 7.0 1.1891 J 0580950 E016M8X1.0
10 1.00 2.15/16 0.6020 0.3810 0.2860 3 9.0 1.2915 T 0580967 E016M10X1.0
14 1.50 3.19/32 0.9843 0.4290 0.3220 3 12.5 31/64 0580974 E016M14X1.5
18 1.50 4.1/32 1.1614 0.5420 0.4060 3 16.5 41/64 0580981 E016M18X1.5
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Point
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Point
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 259
www.precisiondormer.com
E000
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
30.50 48 15 3.15 2.50 5 3 2.5 12.5 0567586 E000M3
3.5 0.60 50 16 3.55 2.80 5 3 2.9 14 0567593 E000M3.5
40.70 53 17 4.00 3.15 6 3 3.3 14 0567609 E000M4
50.80 58 11 5.00 4.00 7 3 4.2 22 0567616 E000M5
61.00 66 13 6.30 5.00 8 3 5.0 26 0567623 E000M6
81.25 72 16 8.00 6.30 9 3 6.8 29 0567630 E000M8
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0567647 E000M10
12 1.75 89 22 9.00 7.10 10 3 10.3 0567654 E000M12
14 2.00 95 24 11.20 9.00 12 3 12.0 0567661 E000M14
16 2.00 102 24 12.50 10.00 13 3 14.0 0567678 E000M16
18 2.50 112 29 14.00 11.20 14 4 15.5 0567685 E000M18
20 2.50 112 29 14.00 11.20 14 4 17.5 0567692 E000M20
22 2.50 118 29 16.00 12.50 16 4 19.5 0567708 E000M22
24 3.00 130 35 18.00 14.00 18 4 21.0 0567715 E000M24
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Point
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
260 www.precisiondormer.com
E001
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
30.50 48 15 3.15 2.50 5 3 2.5 12.5 0567722 E001M3
3.5 0.60 50 16 3.55 2.80 5 3 2.9 14 0567739 E001M3.5
40.70 53 17 4.00 3.15 6 3 3.3 14 0567746 E001M4
50.80 58 11 5.00 4.00 7 3 4.2 22 0567753 E001M5
61.00 66 13 6.30 5.00 8 3 5.0 26 0567760 E001M6
81.25 72 16 8.00 6.30 9 3 6.8 29 0567777 E001M8
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0567784 E001M10
12 1.75 89 22 9.00 7.10 10 3 10.3 0567791 E001M12
14 2.00 95 24 11.20 9.00 12 3 12.0 0567807 E001M14
16 2.00 102 24 12.50 10.00 13 3 14.0 0567814 E001M16
18 2.50 112 29 14.00 11.20 14 4 15.5 0567821 E001M18
20 2.50 112 29 14.00 11.20 14 4 17.5 0567838 E001M20
22 2.50 118 29 16.00 12.50 16 4 19.5 0567845 E001M22
24 3.00 130 35 18.00 14.00 18 4 21.0 0567852 E001M24
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Point
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 261
www.precisiondormer.com
E010
Ŷ
Ɣ
MF P
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
40.50 53 17 4.00 3.15 6 3 3.5 14 0568149 E010M4X.5
50.50 58 11 5.00 4.00 7 3 4.5 22 0568156 E010M5X.5
60.50 66 13 6.30 5.00 8 3 5.5 26 0568163 E010M6X.5
60.75 66 13 6.30 5.00 8 3 5.3 26 0568170 E010M6X.75
80.75 72 16 8.00 6.30 9 3 7.3 29 0568187 E010M8X.75
81.00 72 16 8.00 6.30 9 3 7.0 29 0568194 E010M8X1.0
10 1.00 80 18 10.00 8.00 11 3 9.0 34 0568200 E010M10X1.0
10 1.25 80 18 10.00 8.00 11 3 8.8 34 0568217 E010M10X1.25
12 1.00 89 22 9.00 7.10 10 3 11.0 0568224 E010M12X1.0
12 1.25 89 22 9.00 7.10 10 3 10.8 0568231 E010M12X1.25
12 1.50 89 22 9.00 7.10 10 3 10.5 0568248 E010M12X1.5
14 1.00 95 24 11.20 9.00 12 3 13.0 0568255 E010M14X1.0
14 1.25 95 24 11.20 9.00 12 3 12.8 0568262 E010M14X1.25
14 1.50 95 24 11.20 9.00 12 3 12.5 0568279 E010M14X1.5
16 1.00 102 24 12.50 10.00 13 3 15.0 0568286 E010M16X1.0
16 1.50 102 24 12.50 10.00 13 3 14.5 0568293 E010M16X1.5
18 1.00 112 29 14.00 11.20 14 4 17.0 0568309 E010M18X1.0
18 1.50 112 29 14.00 11.20 14 4 16.5 0568316 E010M18X1.5
20 1.00 112 29 14.00 11.20 14 4 19.0 0568323 E010M20X1.0
20 1.50 112 29 14.00 11.20 14 4 18.5 0568330 E010M20X1.5
20 2.00 112 29 14.00 11.20 14 4 18.0 0568347 E010M20X2.0
22 1.50 118 29 16.00 12.50 16 4 20.5 0568354 E010M22X1.5
24 1.50 130 35 18.00 14.00 18 4 22.5 0568361 E010M24X1.5
24 2.00 130 35 18.00 14.00 18 4 22.0 0568378 E010M24X2.0
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Point
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
262 www.precisiondormer.com
E011
Ŷ
Ɣ
MF P
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
40.50 53 17 4.00 3.15 6 3 3.5 14 0568385 E011M4X.5
50.50 58 11 5.00 4.00 7 3 4.5 22 0568392 E011M5X.5
60.50 66 13 6.30 5.00 8 3 5.5 26 0568408 E011M6X.5
60.75 66 13 6.30 5.00 8 3 5.3 26 0568415 E011M6X.75
80.75 72 16 8.00 6.30 9 3 7.3 29 0568422 E011M8X.75
81.00 72 16 8.00 6.30 9 3 7.0 29 0568439 E011M8X1.0
10 1.00 80 18 10.00 8.00 11 3 9.0 34 0568446 E011M10X1.0
10 1.25 80 18 10.00 8.00 11 3 8.8 34 0568453 E011M10X1.25
12 1.00 89 22 9.00 7.10 10 3 11.0 0568460 E011M12X1.0
12 1.25 89 22 9.00 7.10 10 3 10.8 0568477 E011M12X1.25
12 1.50 89 22 9.00 7.10 10 3 10.5 0568484 E011M12X1.5
14 1.00 95 24 11.20 9.00 12 3 13.0 0568491 E011M14X1.0
14 1.25 95 24 11.20 9.00 12 3 12.8 0568507 E011M14X1.25
14 1.50 95 24 11.20 9.00 12 3 12.5 0568514 E011M14X1.5
16 1.00 102 24 12.50 10.00 13 3 15.0 0568521 E011M16X1.0
16 1.50 102 24 12.50 10.00 13 3 14.5 0568538 E011M16X1.5
18 1.00 112 29 14.00 11.20 14 4 17.0 0568545 E011M18X1.0
18 1.50 112 29 14.00 11.20 14 4 16.5 0568552 E011M18X1.5
20 1.00 112 29 14.00 11.20 14 4 19.0 0568569 E011M20X1.0
20 1.50 112 29 14.00 11.20 14 4 18.5 0568576 E011M20X1.5
20 2.00 112 29 14.00 11.20 14 4 18.0 0568583 E011M20X2.0
22 1.50 118 29 16.00 12.50 16 4 20.5 0568590 E011M22X1.5
24 1.50 130 35 18.00 14.00 18 4 22.5 0568606 E011M24X1.5
24 2.00 130 35 18.00 14.00 18 4 22.0 0568613 E011M24X2.0
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Point
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 263
www.precisiondormer.com
E045 - E049
E045
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
30.50 48 15 3.15 2.50 5 3 2.5 12.5 0605790 E045M3
40.70 53 17 4.00 3.15 6 3 3.3 14 0605806 E045M4
50.80 58 11 5.00 4.00 7 3 4.2 22 0605813 E045M5
61.00 66 13 6.30 5.00 8 3 5 26 0605820 E045M6
81.25 72 16 8.00 6.30 9 3 6.8 29 0605837 E045M8
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0605844 E045M10
12 1.75 89 22 9.00 7.10 10 4 10.3 0605851 E045M12
16 2.00 102 24 12.50 10.00 13 4 14 0605868 E045M16
20 2.50 112 29 14.00 11.20 14 4 17.5 0605875 E045M20
E049
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
30.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0606155 E049M3
40.70 53 14 4.00 3.15 6 3 3.3 14 0606162 E049M4
50.80 58 11 5.00 4.00 7 3 4.2 22 0606179 E049M5
61.00 66 13 6.30 5.00 8 3 5.0 26 0606186 E049M6
81.25 72 16 8.00 6.30 9 3 6.8 29 0606193 E049M8
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0606209 E049M10
12 1.75 89 22 9.00 7.10 10 3 10.3 0606216 E049M12
16 2.00 102 24 12.50 10.00 13 3 14.0 0606223 E049M16
20 2.50 112 29 14.00 11.20 14 4 17.5 0606230 E049M20
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Point for stainless steel
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Point for stainless steel
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
264 www.precisiondormer.com
E046 - E055
E046
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
30.50 48 15 3.15 2.50 5 3 2.5 12.5 0605882 E046M3
40.70 53 17 4.00 3.15 6 3 3.3 14 0605899 E046M4
50.80 58 11 5.00 4.00 7 3 4.2 22 0605905 E046M5
61.00 66 13 6.30 5.00 8 3 5 26 0605912 E046M6
81.25 72 16 8.00 6.30 9 3 6.8 29 0605929 E046M8
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0605936 E046M10
12 1.75 89 22 9.00 7.10 10 4 10.3 0605943 E046M12
16 2.00 102 24 12.50 10.00 13 4 14 0605950 E046M16
20 2.50 112 29 14.00 11.20 14 4 17.5 0605967 E046M20
E055
Ŷ
Ɣ
UNC TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
440 2.85 48 12.5 3.15 2.50 5 3 2.35 12.5 0606667 E0554-40
632 3.51 50 14 3.55 2.80 5 3 2.85 14 0606674 E0556-32
832 4.17 53 9.5 4.50 3.55 6 3 3.5 17 0606681 E0558-32
10 24 4.83 58 11 5.00 4.00 7 3 3.9 20 0606698 E05510-24
1/4 20 6.35 66 13 6.30 5.00 8 3 5.1 26 0606704 E0551/4
5/16 18 7.94 72 16 8.00 6.30 9 3 6.6 29 0606711 E0555/16
3/8 16 9.53 80 18 10.00 8.00 11 3 8 32 0606728 E0553/8
1/2 13 12.70 89 22 9.00 7.10 10 4 10.8 0606735 E0551/2
5/8 11 15.88 102 24 12.50 10.00 13 4 13.5 0606742 E0555/8
3/4 10 19.05 112 29 14.00 11.20 14 4 16.5 0606759 E0553/4
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Point for stainless steel
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 265
www.precisiondormer.com
E057 - E060
E057
Ŷ
Ɣ
UNC TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
632 3.505 50 14 3.55 2.80 5 3 2.85 14 0606865 E0576-32
832 4.166 53 9.5 4.50 3.55 6 3 3.50 17 0606872 E0578-32
10 24 4.826 58 11 5.00 4.00 7 3 3.90 20 0606889 E05710-24
1/4 20 6.350 66 13 6.30 5.00 8 3 5.10 26 0606896 E0571/4
5/16 18 7.938 72 16 8.00 6.30 9 3 6.60 29 0606902 E0575/16
3/8 16 9.525 80 18 10.00 8.00 11 3 8.00 32 0606919 E0573/8
1/2 13 12.700 89 22 9.00 7.10 10 3 10.80 0606926 E0571/2
5/8 11 15.875 102 24 12.50 10.00 13 3 13.50 0606933 E0575/8
3/4 10 19.050 112 29 14.00 11.20 14 4 16.50 0606940 E0573/4
E060
Ŷ
Ɣ
UNF TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
10 32 4.83 58 11 5.00 4.00 7 3 4.1 20 0607107 E06010-32
1/4 28 6.35 66 13 6.30 5.00 8 3 5.5 26 0607114 E0601/4
5/16 24 7.94 72 16 8.00 6.30 9 3 6.9 29 0607121 E0605/16
3/8 24 9.53 80 18 10.00 8.00 11 3 8.5 32 0607138 E0603/8
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Point for stainless steel
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Point for mild steel
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
266 www.precisiondormer.com
1534(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
540 1.15/16 5/8 0.141 0.110 3/16 2 H1 P 1012700
540 1.15/16 5/8 0.141 0.110 3/16 2 H2 B 1012357
540 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 1012356
632 2“ 11/16 0.141 0.110 3/16 2 H1 P 1012359
632 2“ 11/16 0.141 0.110 3/16 2 H2 B 1012363
632 2“ 11/16 0.141 0.110 3/16 2 H2 P 1012360
632 2“ 11/16 0.141 0.110 3/16 2 H3 B 1012364
632 2“ 11/16 0.141 0.110 3/16 2 H3 P 1012361
832 2.1/8 3/4 0.168 0.131 1/4 2 H1 P 1012368
832 2.1/8 3/4 0.168 0.131 1/4 2 H2 B 1012372
832 2.1/8 3/4 0.168 0.131 1/4 2 H2 P 1012369
832 2.1/8 3/4 0.168 0.131 1/4 2 H3 B 1012373
832 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 1012370
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H1 P 1012376
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H2 B 1012379
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 1012377
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 1012380
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 1012378
12 24 2.3/8 15/16 0.220 0.165 9/32 2 H3 B 1012699
12 24 2.3/8 15/16 0.220 0.165 9/32 2 H3 P 1012389
Ŷ
Ɣ
ƔSpiral Point Taps, Relieved Style
ƔFeatures eccentric relieved threads
with full pitch diameter relief
ƔFreer cutting tap, resulting in much
longer tool life
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 267
www.precisiondormer.com
1534(UNF)
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
544 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 1012358
640 2“ 11/16 0.141 0.110 3/16 2 H2 B 1012367
640 2“ 11/16 0.141 0.110 3/16 2 H2 P 1012366
836 2.1/8 3/4 0.168 0.131 1/4 2 H2 P 1012375
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H1 P 1012381
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 B 1012385
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 1012382
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 1012386
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 1012383
12 28 2.3/8 15/16 0.220 0.165 9/32 2 H3 P 1012388
Ŷ
Ɣ
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
ƔSpiral Point Taps, Relieved Style
ƔFeatures eccentric relieved threads with
full pitch diameter relief
ƔFreer cutting tap, resulting in much
longer tool life
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
268 www.precisiondormer.com
1634(UNC) (UNF)
Ŷ
Ɣ
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
440 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 1011102
540 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 1011103
632 2“ 11/16 0.141 0.110 3/16 2 H2 P 1011104
832 2.1/8 3/4 0.168 0.131 1/4 2 H2 P 1011105
1634(UNF)
Ŷ
Ɣ
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 1011106
ƔSpiral Point Taps, Relieved Style
ƔFeatures eccentric relieved threads
with full pitch diameter relief
ƔFreer cutting tap, resulting in much
longer tool life
Ɣ Relieved Style ƔRelieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
1634(UNC)
ƔSpiral Point Taps, Relieved Style
ƔFeatures eccentric relieved threads with
full pitch diameter relief
ƔFreer cutting tap, resulting in much
longer tool life
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 269
www.precisiondormer.com
TN1534(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
440 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 1060805
632 2“ 11/16 0.141 0.110 3/16 2 H3 P 1062361
832 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 1062370
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 1062378
12 24 2.3/8 15/16 0.220 0.165 9/32 2 H3 P 1062389
TN1534(UNF)
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 1062383
Ŷ
Ɣ
Ɣ
Ŷ
ƔSpiral Point Taps, Relieved Style
ƔFeatures eccentric relieved threads with
full pitch diameter relief
ƔFreer cutting tap, resulting in much
longer tool life
ƔSpiral Point Taps, Relieved Style
ƔFeatures eccentric relieved threads with
full pitch diameter relief
ƔFreer cutting tap, resulting in much
longer tool life
Ɣ Relieved Style ƔRelieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
270 www.precisiondormer.com
1585(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H1 P 1010290
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H2 P 1010291
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 1010292
1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 1010295
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 1010294
1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H5 P 1010296
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H5 P 1010293
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H1 P 1010304
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H2 P 1010305
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 1010306
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1010309
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 B 1010308
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H5 P 1010310
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H5 P 1010307
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H1 P 1010318
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H2 P 1010319
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1010320
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H5 P 1010321
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H2 P 1010327
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1010328
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H5 P 1010329
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H1 P 1010334
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H2 P 1010335
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1010336
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H5 P 1010337
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 H3 P 1010342
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 H5 P 1010343
3/4 10 4.1/4 2“ 0.590 0.442 11/16 3 H3 P 1010344
3/4 10 4.1/4 2“ 0.590 0.442 11/16 3 H5 P 1010345
Ŷ
Ɣ
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
ƔSpiral Point Taps, Relieved Style
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 271
www.precisiondormer.com
1585(UNF)
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H1 P 1010297
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H2 P 1010298
1/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H2 P 1010302
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 1010299
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 1010301
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H4 P 1010300
1/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H4 P 1010303
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H1 P 1010311
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H2 P 1010312
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H2 P 1010316
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 1010313
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 B 1010315
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H4 P 1010317
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H4 P 1010314
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H1 P 1010322
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H2 P 1010323
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1010324
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H4 P 1010325
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H2 P 1010331
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1010332
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H5 P 1010333
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H1 P 1010338
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H2 P 1010339
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1010340
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H5 P 1010341
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 3 H3 P 1012774
3/4 16 4.1/4 2“ 0.590 0.442 11/16 3 H3 P 1012775
Ŷ
Ɣ
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
ƔSpiral Point Taps, Relieved Style
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
272 www.precisiondormer.com
1585A(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 1050292
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 1050306
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1050320
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1050328
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1050336
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 H3 P 1050342
3/4 10 4.1/2 2“ 0.590 0.442 11/16 3 H3 P 1050344
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 1050299
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 1050313
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1050324
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1050332
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1050340
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 3 H3 P 1052774
3/4 16 4.1/2 2“ 0.590 0.442 11/16 3 H3 P 1052775
Ŷ
Ɣ
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
1585A(UNC)
1585A(UNF)
ƔSpiral Point Taps, Relieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
ƔSpiral Point Taps, Relieved Style
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 273
www.precisiondormer.com
TN1585(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 1060292
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H5 P 1060293
1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 1060295
1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H5 P 1060296
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 1060306
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1060309
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H5 P 1060310
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1060320
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H5 P 1060321
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1060328
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1060336
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 1060299
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 1060313
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1060324
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1060332
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1060340
Ɣ
Ŷ
Ɣ
Ŷ
TN1585(UNC)
TN1585(UNF)
ƔSpiral Point Taps, Relieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
ƔSpiral Point Taps, Relieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
274 www.precisiondormer.com
1985(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Chamfer
EDP #
or
e-Code
440 1.7/8 9/16 0.141 0.110 3/16 2 P 1013037
540 1.15/16 5/8 0.141 0.110 3/16 2 P 1013039
632 2“ 11/16 0.141 0.110 3/16 2 P 1013041
832 2.1/8 3/4 0.168 0.131 1/4 2 P 1013043
10 24 2.3/8 7/8 0.194 0.152 1/4 2 P 1013045
12 24 2.3/8 15/16 0.220 0.165 9/32 2 P 1013047
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 P 1013049
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 P 1013051
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 P 1013053
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 P 1013055
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 P 1013057
9/16 12 3.19/32 1.21/32 0.429 0.322 1/2 3 P 1013059
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 P 1013061
3/4 10 4.1/4 2“ 0.590 0.442 11/16 3 P 1013065
7/8 9 4.11/16 2.7/32 0.697 0.523 3/4 4 P 1013067
1“ 8 5.1/8 2.1/2 0.800 0.600 13/16 4 P 1013069
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
448 1.7/8 9/16 0.141 0.110 3/16 2 2B P 1013038
544 1.15/16 5/8 0.141 0.110 3/16 2 2B P 1013040
640 2“ 11/16 0.141 0.110 3/16 2 2B P 1013042
836 2.1/8 3/4 0.168 0.131 1/4 2 2B P 1013044
10 32 2.3/8 7/8 0.194 0.152 1/4 2 2B P 1013046
12 28 2.3/8 15/16 0.220 0.165 9/32 2 2B P 1013048
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 2B P 1013050
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 2B P 1013052
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 2B P 1013054
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 2B P 1013056
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 2B P 1013058
9/16 18 3.19/32 1.21/32 0.429 0.322 1/2 3 2B P 1013060
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 3 2B P 1013062
3/4 16 4.1/4 2“ 0.590 0.442 11/16 3 2B P 1013066
7/8 14 4.11/16 2.7/32 0.697 0.523 3/4 4 2B P 1013068
1985(UNC)
1985(UNF)
Ŷ
Ɣ
Ŷ
Ɣ
Ɣ Taps feature a high hook, special O.D. and
P.D. relief, and increased back taper
Ɣ For use in through hole applications where
a free-cutting action is required
Ɣ DDX Spiral Point Taps, Relieved Style, High Hook
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 275
www.precisiondormer.com
1785M-TN1785
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
M2 0.40 1.3/4 7/16 0.141 0.110 3/16 2 D3 P 1012659
M2.3 0.45 1.3/4 7/16 0.141 0.110 3/16 2 D3 P 1012661
M2.5 0.45 1.13/16 1/2 0.141 0.110 3/16 2 D3 P 1012662
M2.6 0.45 1.13/16 1/2 0.141 0.110 3/16 2 D3 P 1012663
M3 0.50 1.15/16 5/8 0.141 0.110 3/16 2 D3 P 1012664
M3.5 0.60 2“ 11/16 0.141 0.110 3/16 2 D4 P 1012666
M4 0.70 2.1/8 3/4 0.168 0.131 1/4 2 D4 P 1012668
M4.5 0.75 2.3/8 7/8 0.194 0.152 1/4 2 D4 P 1012669
M5 0.80 2.3/8 7/8 0.194 0.152 1/4 2 D4 P 1012672
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 2 D5 P 1012674
M7 1.00 2.23/32 1.1/8 0.318 0.238 3/8 2 D5 P 1012676
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 2 D5 P 1012678
M9 1.25 2.15/16 1.1/4 0.381 0.286 7/16 3 D5 P 1012680
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 3 D5 P 1012682
M11 1.50 3.5/32 1.7/16 0.323 0.242 13/32 3 D6 P 1012685
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 3 D6 P 1012686
M14 2.00 3.19/32 1.21/32 0.429 0.322 1/2 3 D7 P 1012689
M16 2.00 3.13/16 1.13/16 0.480 0.360 9/16 3 D7 P 1012693
M18 2.50 4.1/32 1.13/16 0.542 0.406 5/8 3 D7 P 1012696
TN1785
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
M4 0.70 2.1/8 3/4 0.168 0.131 1/4 2 D4 P 1062668
M5 0.80 2.3/8 7/8 0.194 0.152 1/4 2 D4 P 1062672
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 2 D5 P 1062674
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 2 D5 P 1062678
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 3 D5 P 1062682
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 3 D6 P 1062686
ŶƔ
Ŷ
Ɣ
ƔSpiral Point Taps, Relieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
1785M
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
276 www.precisiondormer.com
1534NR(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
164 1.11/16 3/8 0.141 0.110 3/16 2 H1 P 1010779
164 1.11/16 3/8 0.141 0.110 3/16 2 H2 P 1010780
256 1.3/4 7/16 0.141 0.110 3/16 2 H1 P 1010787
256 1.3/4 7/16 0.141 0.110 3/16 2 H2 B 1010790
256 1.3/4 7/16 0.141 0.110 3/16 2 H2 P 1010788
348 1.13/16 1/2 0.141 0.110 3/16 2 H2 B 1010798
348 1.13/16 1/2 0.141 0.110 3/16 2 H2 P 1010796
440 1.7/8 9/16 0.141 0.110 3/16 2 H1 P 1010804
632 2“ 11/16 0.141 0.110 3/16 2 H1 P 1010818
632 2“ 11/16 0.141 0.110 3/16 2 H2 B 1010822
632 2“ 11/16 0.141 0.110 3/16 2 H2 P 1010819
632 2“ 11/16 0.141 0.110 3/16 2 H3 B 1010823
632 2“ 11/16 0.141 0.110 3/16 2 H3 P 1010820
832 2.1/8 3/4 0.168 0.131 1/4 2 H1 P 1010828
832 2.1/8 3/4 0.168 0.131 1/4 2 H2 B 1010832
832 2.1/8 3/4 0.168 0.131 1/4 2 H2 P 1010829
832 2.1/8 3/4 0.168 0.131 1/4 2 H3 B 1010833
832 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 1010830
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H1 P 1010837
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H2 B 1010841
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 1010838
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 1010842
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 1010839
12 24 2.3/8 15/16 0.220 0.165 9/32 2 H3 B 1011072
12 24 2.3/8 15/16 0.220 0.165 9/32 2 H3 P 1011071
Ŷ
Ɣ
ƔSpiral Point Taps, Non-Relieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
440 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 1010805
440 1.7/8 9/16 0.141 0.110 3/16 2 H2 B 1010807
540 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 1010813
540 1.15/16 5/8 0.141 0.110 3/16 2 H2 B 1010815
ƔRecommended for older equipment
or manual feed rate applications where
the feed rate control is not suffi cient
for a relieved style tap like our
1534/1585 series
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 277
www.precisiondormer.com
1534NR(UNF) (UNS)
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
080 1.5/8 5/16 0.141 0.110 3/16 2 H1 P 1010775
080 1.5/8 5/16 0.141 0.110 3/16 2 H2 B 1010778
080 1.5/8 5/16 0.141 0.110 3/16 2 H2 P 1010776
172 1.11/16 3/8 0.141 0.110 3/16 2 H1 P 1010783
172 1.11/16 3/8 0.141 0.110 3/16 2 H2 P 1010784
264 1.3/4 7/16 0.141 0.110 3/16 2 H1 P 1010791
264 1.3/4 7/16 0.141 0.110 3/16 2 H2 P 1010792
356 1.13/16 1/2 0.141 0.110 3/16 2 H1 P 1010799
356 1.13/16 1/2 0.141 0.110 3/16 2 H2 P 1010800
448 1.7/8 9/16 0.141 0.110 3/16 2 H2 B 1010811
448 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 1010809
544 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 1010817
640 2“ 11/16 0.141 0.110 3/16 2 H2 B 1010827
640 2“ 11/16 0.141 0.110 3/16 2 H2 P 1010825
836 2.1/8 3/4 0.168 0.131 1/4 2 H2 P 1010835
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H1 P 1010843
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 B 1010847
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H2 P 1010844
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 1010848
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 1010845
12 28 2.3/8 15/16 0.220 0.165 9/32 2 H3 P 1010853
UNS TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
436 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 1010803
Ŷ
Ɣ
1534NR(UNS)
1534NR(UNF)
ƔRecommended for older equipment
or manual feed rate applications where
the feed rate control is not suffi cient
for a relieved style tap like our
1534/1585 series
ƔSpiral Point Taps, Non-Relieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
278 www.precisiondormer.com
1585NR(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H1 P 1012813
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H2 P 1012814
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 1012815
1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 1012818
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 1012817
1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H5 P 1012819
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H5 P 1012816
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H1 P 1012827
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H2 P 1012828
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 1012829
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1012832
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 1012831
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H5 P 1012833
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H5 P 1012830
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H1 P 1012841
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H2 P 1012842
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1012843
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H5 P 1012844
7/16 14 3.5/32 1.7/16 0.323 0.242 113/32 3 H2 P 1012849
7/16 14 3.5/32 1.7/16 0.323 0.242 113/32 3 H3 P 1012850
7/16 14 3.5/32 1.7/16 0.323 0.242 113/32 3 H5 P 1012851
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H1 P 1012855
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H2 P 1012856
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1012857
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H5 P 1012858
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 H3 P 1012863
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 H5 P 1012864
3/4 10 4.1/2 2“ 0.590 0.442 11/16 3 H3 P 1012865
3/4 10 4.1/2 2“ 0.590 0.442 11/16 3 H5 P 1012866
Ŷ
Ɣ
ƔRecommended for older equipment
or manual feed rate applications where
the feed rate control is not suffi cient for
a relieved style tap like our 1534/1585
series
ƔSpiral Point Taps, Non-Relieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 279
www.precisiondormer.com
1585NR(UNF)
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H1 P 1012820
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H2 P 1012821
1/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H2 P 1012825
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 1012822
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 1012824
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H4 P 1012823
1/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H4 P 1012826
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H1 P 1012834
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H2 P 1012835
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H2 P 1012839
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H3 P 1012836
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 1012838
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H4 P 1012840
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 2 H4 P 1012837
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H1 P 1012845
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H2 P 1012846
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1012847
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H4 P 1012848
7/16 20 3.5/32 1.7/16 0.323 0.242 113/32 3 H2 P 1012852
7/16 20 3.5/32 1.7/16 0.323 0.242 113/32 3 H3 P 1012853
7/16 20 3.5/32 1.7/16 0.323 0.242 113/32 3 H5 P 1012854
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H1 P 1012859
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H2 P 1012860
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1012861
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H5 P 1012862
5/8 18 3.13/16 1.13/16 0.480 0.360 9/16 3 H3 P 1012867
3/4 16 4.1/2 2“ 0.590 0.442 11/16 3 H3 P 1012868
Ŷ
Ɣ
ƔSpiral Point Taps, Non-Relieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
ƔRecommended for older equipment
or manual feed rate applications where
the feed rate control is not suffi cient
for a relieved style tap like our
1534/1585 series
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
280 www.precisiondormer.com
1593(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
632 2“ 11/16 0.141 0.110 3/16 2 H7 P 1010877
832 2.1/8 3/4 0.168 0.131 1/4 2 H7 P 1010879
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H7 P 1010881
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H7 P 1010883
Ŷ
Ɣ
Ŷ
Ɣ
1593(UNC)
1593(UNF)
Ɣ .003”/.0035” Oversize
Ɣ Used primarily where a part will be
plated or treated after tapping
ƔSpiral Point Taps, Relieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 281
www.precisiondormer.com
1585OV(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H11 P 1011754
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 2 H11 P 1011755
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H11 P 1011756
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H11 P 1011757
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H11 P 1011758
5/8 11 3.13/16 1.13/16 0.480 0.360 9/16 3 H11 P 1011759
Ŷ
Ɣ
ƔSpiral Point Taps, Relieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ɣ .005” Oversize
Ɣ Used primarily where a part will be
plated or treated after tapping
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
282 www.precisiondormer.com
MP
mm
l1
Inch
l2
Inch
l3
Inch
d2
Ø
Inch a
Inch
#
Flutes Limits
EDP #
or
e-Code
1.6 0.35 1.5/8 5/16 3/16 0.1410 0.1100 2 D3 1012890
20.40 1.3/4 7/16 3/16 0.1410 0.1100 2 D3 1012891
2.3 0.40 1.3/4 7/16 3/16 0.1410 0.1100 2 D3 1012892
2.5 0.45 1.13/16 1/2 3/16 0.1410 0.1100 2 D3 1012893
2.6 0.45 1.13/16 1/2 3/16 0.1410 0.1100 2 D3 1012894
30.50 1.15/16 5/8 3/16 0.1410 0.1100 2 D3 1012896
3.5 0.60 2“ 11/16 3/16 0.1410 0.1100 2 D4 1012897
40.70 2.1/8 3/4 1/4 0.1380 0.1310 2 D4 1012898
4.5 0.75 2.3/8 7/8 1/4 0.1940 0.1520 2 D4 1012899
50.80 2.3/8 7/8 1/4 0.1940 0.1520 2 D4 1012900
61.00 2.1/2 1“ 5/16 0.2550 0.1910 2 D5 1012901
71.00 2.23/32 1.1/8 3/8 0.3180 0.2380 2 D5 1012902
81.25 2.23/32 1.1/8 3/8 0.3180 0.2380 2 D5 1012903
10 1.50 2.15/16 1.1/4 7/16 0.3810 0.2860 3 D6 1012904
12 1.75 3.3/8 1.21/32 7/16 0.3670 0.2750 3 D6 1012905
14 2.00 3.19/32 1.21/32 1/2 0.4290 0.3220 3 D7 1012906
16 2.00 3.13/16 1.13/16 9/16 0.4800 0.3600 3 D7 1012907
18 2.50 4.1/32 1.13/16 5/8 0.5420 0.4060 3 D7 1012908
20 2.50 4.15/32 2“ 11/16 0.6520 0.4890 3 D7 1012909
Ŷ
Ɣ
1785NR
ƔRecommended for applications requiring
close gauging fi ts and in older equipment
that is not suffi ciently rigid to accomodate
the 1534/1585 series
ƔSpiral Point Taps, Non-Relieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 283
www.precisiondormer.com
1534NE(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
440 4“ 9/16 0.141 0.110 3/16 2 H2 P 1020002
632 4“ 11/16 0.141 0.110 3/16 2 H3 P 1020004
632 6“ 11/16 0.141 0.110 3/16 2 H3 P 1020006
832 4“ 3/4 0.168 0.131 1/4 2 H3 P 1020008
832 6“ 3/4 0.168 0.131 1/4 2 H3 P 1020010
10 24 4“ 7/8 0.194 0.152 1/4 2 H3 P 1020012
10 24 6“ 7/8 0.194 0.152 1/4 2 H3 P 1020014
1/4 20 4“ 1“ 0.255 0.191 5/16 2 H3 P 1020020
1/4 20 6“ 1“ 0.255 0.191 5/16 2 H3 P 1020022
5/16 18 4“ 1.1/8 0.318 0.238 3/8 2 H3 P 1020028
5/16 18 6“ 1.1/8 0.318 0.238 3/8 2 H3 P 1020030
3/8 16 4“ 1.1/4 0.381 0.286 7/16 3 H3 P 1020036
3/8 16 6“ 1.1/4 0.381 0.286 7/16 3 H3 P 1020038
7/16 14 6“ 1.7/16 0.323 0.242 13/32 3 H3 P 1020044
1/2 13 6“ 1.21/32 0.367 0.275 7/16 3 H3 P 1020048
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
10 32 4“ 7/8 0.194 0.152 1/4 2 H3 P 1020016
10 32 6“ 7/8 0.194 0.152 1/4 2 H3 P 1020018
1/4 28 4“ 1“ 0.255 0.191 5/16 2 H3 P 1020024
1/4 28 6“ 1“ 0.255 0.191 5/16 2 H3 P 1020026
5/16 24 4“ 1.1/8 0.318 0.238 3/8 2 H3 P 1020032
5/16 24 6“ 1.1/8 0.318 0.238 3/8 2 H3 P 1020034
3/8 24 4“ 1.1/4 0.381 0.286 7/16 3 H3 P 1020040
3/8 24 6“ 1.1/4 0.381 0.286 7/16 3 H3 P 1020042
7/16 20 6“ 1.7/16 0.323 0.242 13/32 3 H3 P 1020046
1/2 20 6“ 1.21/32 0.367 0.275 7/16 3 H3 P 1020050
Ŷ
Ɣ
Ŷ
Ɣ
ƔRecommended for applications requiring
close gauging fi ts and in older equipment
that is not suffi ciently rigid to accomodate
the 1534/1585 series
ƔSpiral Point Taps, Extension Style,
Non-Relieved Style
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
1534NE(UNF)
1534NE(UNC)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
284 www.precisiondormer.com
1578(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits
EDP #
or
e-Code
440 2“ 11/16 0.141 0.110 3/16 2 H2 1010491
632 2.3/8 7/8 0.194 0.152 1/4 2 H2 1010494
632 2.3/8 7/8 0.194 0.152 1/4 2 H3 1010495
832 2.3/8 15/16 0.220 0.165 9/32 2 H2 1010498
832 2.3/8 15/16 0.220 0.165 9/32 2 H3 1010499
1/4 20 2.23/32 1.1/8 0.318 0.238 5/16 2 H2 1010506
1/4 20 2.23/32 1.1/8 0.318 0.238 5/16 2 H3 1010507
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits
EDP #
or
e-Code
10 32 2.1/2 1“ 0.255 0.191 9/32 2 H2 1010502
1/4 28 2.23/32 1.1/8 0.318 0.238 5/16 2 H2 1010508
1/4 28 2.23/32 1.1/8 0.318 0.238 5/16 2 H3 1010509
Ŷ
Ɣ
Ŷ
Ɣ
ƔSTI taps are oversize so that the thread
they produce will accept a helical coil
wire screw thread insert of the same
nominal size and pitch
ƔSpiral Point Tap, Screw Thread Insert
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
1578(UNC)
1578(UNF)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 285
www.precisiondormer.com
E027
Ŷ
Ɣ
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
Inch Stock #
EDP #
or
e-Code
632 2“ 0.2610 0.1410 0.1100 3 H2 N36 2.85 0.5938 0581506 E0276-32
832 2.1/8 0.2484 0.1680 0.1310 3 H2 N29 3.50 0.6526 0581513 E0278-32
10 24 2.3/8 0.2650 0.1940 0.1520 3 H3 N25 3.90 0.8434 0581520 E02710-24
12 24 2.3/8 0.2520 0.2200 0.1650 3 H3 N16 4.50 0.8848 0581537 E02712-24
1/4 20 2.1/2 0.3937 0.2550 0.1910 3 H3 N7 5.10 1.0993 0581544 E0271/4
5/16 18 2.23/32 0.4567 0.3180 0.2380 3 H3 F 6.60 1.3094 0581551 E0275/16
3/8 16 2.15/16 0.5315 0.3810 0.2860 3 H3 5/16 8.00 1.4415 0581568 E0273/8
7/16 14 3.5/32 0.6299 0.3230 0.2420 3 H3 U 9.40 0581575 E0277/16
1/2 13 3.3/8 0.6890 0.3670 0.2750 3 H3 27/64 10.80 0581582 E0271/2
9/16 12 3.19/32 0.7087 0.4290 0.3220 3 H3 31/64 12.20 0581599 E0279/16
5/8 11 3.13/16 0.7087 0.4800 0.3600 3 H3 17/32 13.50 0581605 E0275/8
3/4 10 4.1/4 0.8858 0.5900 0.4420 3 H4 21/32 16.50 0581612 E0273/4
7/8 9 4.11/16 0.9843 0.6970 0.5230 3 H4 49/64 19.50 0581629 E0277/8
1“ 8 5.1/8 1.1811 0.8000 0.6000 3 H4 7/8 22.25 0581636 E0271
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
286 www.precisiondormer.com
E028
Ŷ
Ɣ
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
Inch Stock #
EDP #
or
e-Code
440 1.7/8 0.6091 0.1410 0.1100 3 H2 N43 2.35 0.6091 0581643 E0284-40
540 1.15/16 0.7404 0.1410 0.1100 3 H2 N38 2.65 0.7404 0581650 E0285-40
632 2“ 0.2610 0.1410 0.1100 3 H2 N36 2.85 0.5938 0581667 E0286-32
832 2.1/8 0.2484 0.1680 0.1310 3 H2 N29 3.50 0.6526 0581674 E0288-32
10 24 2.3/8 0.2650 0.1940 0.1520 3 H3 N25 3.90 0.8434 0581681 E02810-24
12 24 2.3/8 0.2520 0.2200 0.1650 3 H3 N16 4.50 0.8848 0581698 E02812-24
1/4 20 2.1/2 0.3937 0.2550 0.1910 3 H3 N7 5.10 1.0993 0581704 E0281/4
5/16 18 2.23/32 0.4567 0.3180 0.2380 3 H3 F 6.60 1.3094 0581711 E0285/16
3/8 16 2.15/16 0.5315 0.3810 0.2860 3 H3 5/16 8.00 1.4415 0581728 E0283/8
3/8 16 2.15/16 0.5315 0.3810 0.2860 3 H5 5/16 8.00 1.4415 0581735 E0283/8H5 1)
7/16 14 3.5/32 0.6299 0.3230 0.2420 3 H3 U 9.40 0581742 E0287/16
1/2 13 3.3/8 0.6890 0.3670 0.2750 3 H3 27/64 10.80 0581759 E0281/2
9/16 12 3.19/32 0.7087 0.4290 0.3220 3 H3 31/64 12.20 0581766 E0289/16
5/8 11 3.13/16 0.7087 0.4800 0.3600 3 H3 17/32 13.50 0581773 E0285/8
3/4 10 4.1/4 0.8858 0.5900 0.4420 3 H4 21/32 16.50 0581780 E0283/4
7/8 9 4.11/16 0.9843 0.6970 0.5230 3 H4 49/64 19.50 0581797 E0287/8
1“ 8 5.1/8 1.1811 0.8000 0.6000 3 H4 7/8 22.25 0581803 E0281
1) Class of fi t: 2B
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 287
www.precisiondormer.com
E037
Ŷ
Ɣ
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
Inch Stock #
EDP #
or
e-Code
10 32 2.3/8 0.2650 0.1940 0.1520 3 H2 N21 4.10 0.8434 0582312 E03710-32
1/4 28 2.1/2 0.3937 0.2550 0.1910 3 H3 N3 5.50 1.0993 0582329 E0371/4
5/16 24 2.23/32 0.4567 0.3180 0.2380 3 H3 I 6.90 1.3094 0582336 E0375/16
3/8 24 2.15/16 0.5315 0.3810 0.2860 3 H3 Q 8.50 1.4415 0582343 E0373/8
7/16 20 3.5/32 0.6299 0.3230 0.2420 3 H3 25/64 9.90 0582350 E0377/16
1/2 20 3.3/8 0.6890 0.3670 0.2750 3 H3 29/64 11.50 0582367 E0371/2
9/16 18 3.19/32 0.7087 0.4290 0.3220 3 H3 33/64 12.90 0582374 E0379/16
5/8 18 3.13/16 0.7087 0.4800 0.3600 3 H3 37/64 14.50 0582381 E0375/8
3/4 16 4.1/4 0.8858 0.5900 0.4420 3 H3 11/16 17.50 0582398 E0373/4
7/8 14 4.11/16 0.9843 0.6970 0.5230 3 H4 13/16 20.40 0582404 E0377/8
1“ 12 5.1/8 1.1811 0.8000 0.6000 3 H4 59/64 23.25 0582411 E0371-12
1“ 14 5.1/8 1.1811 0.8000 0.6000 3 H4 59/64 23.50 0582428 E0371-14
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
288 www.precisiondormer.com
E038
Ŷ
Ɣ
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
Inch Stock #
EDP #
or
e-Code
10 32 2.3/8 0.2650 0.1940 0.1520 3 H2 N21 4.10 0.8434 0582435 E03810-32
1/4 28 2.1/2 0.3937 0.2550 0.1910 3 H3 N3 5.50 1.0993 0582442 E0381/4
5/16 24 2.23/32 0.4567 0.3180 0.2380 3 H3 I 6.90 1.3094 0582459 E0385/16
3/8 24 2.15/16 0.5315 0.3810 0.2860 3 H3 Q 8.50 1.4415 0582466 E0383/8
7/16 20 3.5/32 0.6299 0.3230 0.2420 3 H3 25/64 9.90 0582473 E0387/16
1/2 20 3.3/8 0.6890 0.3670 0.2750 3 H3 29/64 11.50 0582480 E0381/2
9/16 18 3.19/32 0.7087 0.4290 0.3220 3 H3 33/64 12.90 0582497 E0389/16
5/8 18 3.13/16 0.7087 0.4800 0.3600 3 H3 37/64 14.50 0582503 E0385/8
3/4 16 4.1/4 0.8858 0.5900 0.4420 3 H3 11/16 17.50 0582510 E0383/4
7/8 14 4.11/16 0.9843 0.6970 0.5230 3 H4 13/16 20.40 0582527 E0387/8
1“ 12 5.1/8 1.1811 0.8000 0.6000 3 H4 59/64 23.25 0582534 E0381-12
1“ 14 5.1/8 1.1811 0.8000 0.6000 3 H4 59/64 23.50 0582541 E0381-14
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 289
www.precisiondormer.com
E069
Ŷ
Ɣ
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
Inch Stock #
EDP #
or
e-Code
440 1.7/8 0.6091 0.1410 0.1100 3 H2 N43 2.35 0.6091 0582718 E0694-40
540 1.15/16 0.7404 0.1410 0.1100 3 H2 N38 2.65 0.7404 0582725 E0695-40
632 2“ 0.2610 0.1410 0.1100 3 H2 N36 2.85 0.5938 0582732 E0696-32
832 2.1/8 0.2484 0.1680 0.1310 3 H2 N29 3.50 0.6526 0582749 E0698-32
10 24 2.3/8 0.2650 0.1940 0.1520 3 H3 N25 3.90 0.8434 0582756 E06910-24
12 24 2.3/8 0.2520 0.2200 0.1650 3 H3 N16 4.50 0.8848 0582763 E06912-24
1/4 20 2.1/2 0.3937 0.2550 0.1910 3 H3 7 5.10 1.0993 0582770 E0691/4
5/16 18 2.23/32 0.4567 0.3180 0.2380 3 H3 F 6.60 1.3094 0582787 E0695/16
3/8 16 2.15/16 0.5315 0.3810 0.2860 3 H3 5/16 8.00 1.4415 0582794 E0693/8
7/16 14 3.5/32 0.6299 0.3230 0.2420 3 H3 U 9.40 0582800 E0697/16
1/2 13 3.3/8 0.6890 0.3670 0.2750 3 H3 27/64 10.80 0582817 E0691/2
9/16 12 3.19/32 0.7087 0.4290 0.3220 3 H3 31/64 12.20 0582824 E0699/16
5/8 11 3.13/16 0.7087 0.4800 0.3600 4 H3 17/32 13.50 0582831 E0695/8
3/4 10 4.1/4 0.8858 0.5900 0.4420 4 H4 21/32 16.50 0582848 E0693/4
7/8 9 4.11/16 0.9843 0.6970 0.5230 4 H4 49/64 19.50 0582855 E0697/8
1“ 8 5.1/8 1.1811 0.8000 0.6000 4 H4 7/8 22.25 0582862 E0691
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute for stainless steel
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
290 www.precisiondormer.com
E079
Ŷ
Ɣ
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes Limits
l4
Inch Stock #
EDP #
or
e-Code
10 32 2.3/8 0.2650 0.1940 0.1520 3 H2 N21 4.10 0.8434 0582916 E07910-32
1/4 28 2.1/2 0.3937 0.2550 0.1910 3 H3 N3 5.50 1.0993 0582923 E0791/4
5/16 24 2.23/32 0.4567 0.3180 0.2380 3 H3 I 6.90 1.3094 0582930 E0795/16
3/8 24 2.15/16 0.5315 0.3810 0.2860 3 H3 Q 8.50 1.4415 0582947 E0793/8
7/16 20 3.5/32 0.6299 0.3230 0.2420 3 H3 25/64 9.90 0582954 E0797/16
1/2 20 3.3/8 0.6890 0.3670 0.2750 3 H3 29/64 11.50 0582961 E0791/2
9/16 18 3.19/32 0.7087 0.4290 0.3220 3 H3 33/64 12.90 0582978 E0799/16
5/8 18 3.13/16 0.7087 0.4800 0.3600 4 H3 37/64 14.50 0582985 E0795/8
3/4 16 4.1/4 0.8858 0.5900 0.4420 4 H3 11/16 17.50 0582992 E0793/4
7/8 14 4.11/16 0.9843 0.6970 0.5230 4 H4 13/16 20.40 0583005 E0797/8
1“ 12 5.1/8 1.1811 0.8000 0.6000 4 H4 59/64 23.25 0583012 E0791-12
1“ 14 5.1/8 1.1811 0.8000 0.6000 4 H4 59/64 23.50 0583029 E0791-14
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute for stainless steel
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 291
www.precisiondormer.com
E007 - E008
E007
Ŷ
Ɣ
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Inch Stock #
EDP #
or
e-Code
40.70 2.1/8 0.2484 0.1680 0.1310 3 3.3 0.6526 N30 0580608 E007M4
50.80 2.3/8 0.2650 0.1940 0.1520 3 4.2 0.8434 N19 0580615 E007M5
61.00 2.1/2 0.3937 0.2550 0.1910 3 5 1.0993 N9 0580622 E007M6
81.25 2.23/32 0.4567 0.3180 0.2380 3 6.8 1.3094 H 0580639 E007M8
10 1.50 2.15/16 0.5315 0.3810 0.2860 3 8.5 1.4415 Q 0580646 E007M10
12 1.75 3.3/8 0.6890 0.3670 0.2750 3 10.3 Y 0580653 E007M12
14 2.00 3.19/32 0.7087 0.4290 0.3220 3 12 15/32 0580660 E007M14
16 2.00 3.13/16 0.7087 0.4800 0.3600 3 14 35/64 0580677 E007M16
18 2.50 4.1/32 0.8858 0.5420 0.4060 3 15.5 39/64 0580684 E007M18
20 2.50 4.15/32 0.8858 0.6520 0.4890 3 17.5 11/16 0580691 E007M20
E008
Ŷ
Ɣ
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Stock #
EDP #
or
e-Code
40.70 2.1/8 0.2484 0.1680 0.1310 3 3.3 0.6526 N30 0580707 E008M4
50.80 2.3/8 0.2650 0.1940 0.1520 3 4.2 0.8434 N19 0580714 E008M5
61.00 2.1/2 0.3937 0.2550 0.1910 3 5 1.0993 N9 0580721 E008M6
81.25 2.23/32 0.4567 0.3180 0.2380 3 6.8 1.3094 H 0580738 E008M8
10 1.50 2.15/16 0.5315 0.3810 0.2860 3 8.5 1.4415 Q 0580745 E008M10
12 1.75 3.3/8 0.6890 0.3670 0.2750 3 10.3 Y 0580752 E008M12
14 2.00 3.19/32 0.7087 0.4290 0.3220 3 12 15/32 0580769 E008M14
16 2.00 3.13/16 0.7087 0.4800 0.3600 3 14 35/64 0580776 E008M16
18 2.50 4.1/32 0.8858 0.5420 0.4060 3 15.5 39/64 0580783 E008M18
20 2.50 4.15/32 0.8858 0.6520 0.4890 3 17.5 11/16 0580790 E008M20
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
292 www.precisiondormer.com
E017 - E018
E017
Ŷ
Ɣ
MF P
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Inch Stock #
EDP #
or
e-Code
81.00 2.23/32 0.4567 0.3180 0.2380 3 7.0 1.3094 J 0580998 E017M8X1.0
10 1.00 2.15/16 0.5315 0.3810 0.2860 3 9.0 1.4415 T 0581001 E017M10X1.0
14 1.50 3.19/32 0.7087 0.4290 0.3220 3 12.5 31/64 0581018 E017M14X1.5
18 1.50 4.1/32 0.8858 0.5420 0.4060 3 16.5 41/64 0581025 E017M18X1.5
Ŷ
Ɣ
MF P
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Stock #
EDP #
or
e-Code
81.00 2.23/32 0.4567 0.3180 0.2380 3 7.0 1.3094 J 0581032 E018M8X1.0
10 1.00 2.15/16 0.5315 0.3810 0.2860 3 9.0 1.4415 T 0581049 E018M10X1.0
14 1.50 3.19/32 0.7087 0.4290 0.3220 3 12.5 31/64 0581056 E018M14X1.5
18 1.50 4.1/32 0.8858 0.5420 0.4060 3 16.5 41/64 0581063 E018M18X1.5
E018
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 293
www.precisiondormer.com
E085
Ŷ
Ɣ
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Inch Stock #
EDP #
or
e-Code
40.70 2.1/8 0.2484 0.1680 0.1310 3 3.3 0.6526 N30 0583036 E085M4
50.80 2.3/8 0.2650 0.1940 0.1520 3 4.2 0.8434 N19 0583043 E085M5
61.00 2.1/2 0.3937 0.2550 0.1910 3 5 1.0993 N9 0583050 E085M6
81.25 2.23/32 0.4567 0.3180 0.2380 3 6.8 1.3094 H 0583067 E085M8
10 1.50 2.15/16 0.5315 0.3810 0.2860 3 8.5 1.4415 Q 0583074 E085M10
12 1.75 3.3/8 0.6890 0.3670 0.2750 3 10.3 Y 0583081 E085M12
14 2.00 3.19/32 0.7087 0.4290 0.3220 3 12 15/32 0583098 E085M14
16 2.00 3.13/16 0.7087 0.4800 0.3600 4 14 35/64 0583104 E085M16
20 2.50 4.15/32 0.8858 0.6520 0.4890 4 17.5 11/16 0583111 E085M20
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute for stainless steel
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
294 www.precisiondormer.com
E002
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
30.50 48 6 3.15 2.50 5 3 2.5 12.5 0567869 E002M3
3.5 0.60 50 16 3.55 2.80 5 3 2.9 14 0567876 E002M3.5
40.70 53 7 4.00 3.15 6 3 3.3 19 0567883 E002M4
50.80 58 8 5.00 4.00 7 3 4.2 22 0567890 E002M5
61.00 66 10 6.30 5.00 8 3 5.0 27 0567906 E002M6
81.25 72 12 8.00 6.30 9 3 6.8 31 0567913 E002M8
10 1.50 80 15 10.00 8.00 11 3 8.5 35 0567920 E002M10
12 1.75 89 16 9.00 7.10 10 3 10.3 0567937 E002M12
14 2.00 95 18 11.20 9.00 12 3 12.0 0567944 E002M14
16 2.00 102 18 12.50 10.00 13 4 14.0 0567951 E002M16
18 2.50 112 29 14.00 11.20 14 4 15.5 0567968 E002M18
20 2.50 112 29 14.00 11.20 14 4 17.5 0567975 E002M20
22 2.50 118 29 16.00 12.50 16 4 19.5 0567982 E002M22
24 3.00 130 35 18.00 14.00 18 4 21.0 0567999 E002M24
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 295
www.precisiondormer.com
E003
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
30.50 48 6 3.15 2.50 5 3 2.5 12.5 0568002 E003M3
3.5 0.60 50 16 3.55 2.80 5 3 2.9 14 0568019 E003M3.5
40.70 53 7 4.00 3.15 6 3 3.3 19 0568026 E003M4
50.80 58 8 5.00 4.00 7 3 4.2 22 0568033 E003M5
61.00 66 10 6.30 5.00 8 3 5.0 27 0568040 E003M6
81.25 72 12 8.00 6.30 9 3 6.8 31 0568057 E003M8
10 1.50 80 15 10.00 8.00 11 3 8.5 35 0568064 E003M10
12 1.75 89 16 9.00 7.10 10 3 10.3 0568071 E003M12
14 2.00 95 18 11.20 9.00 12 3 12.0 0568088 E003M14
16 2.00 102 18 12.50 10.00 13 4 14.0 0568095 E003M16
18 2.50 112 29 14.00 11.20 14 4 15.5 0568101 E003M18
20 2.50 112 29 14.00 11.20 14 4 17.5 0568118 E003M20
22 2.50 118 29 16.00 12.50 16 4 19.5 0568125 E003M22
24 3.00 130 35 18.00 14.00 18 4 21.0 0568132 E003M24
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
296 www.precisiondormer.com
E012
Ŷ
Ɣ
MF P
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
40.50 53 7 4.0 3.15 6 3 3.5 19 0568620 E012M4X.5
50.50 58 8 5.0 4.0 7 3 4.5 22 0568637 E012M5X.5
60.50 66 10 6.3 5.0 8 3 5.5 27 0568644 E012M6X.5
60.75 66 10 6.3 5.0 8 3 5.3 27 0568651 E012M6X.75
80.75 72 12 8.0 6.3 9 3 7.3 31 0568668 E012M8X.75
81.00 72 12 8.0 6.3 9 3 7.0 31 0568675 E012M8X1.0
10 1.00 80 15 10.0 8.0 11 3 9.0 35 0568682 E012M10X1.0
10 1.25 80 15 10.0 8.0 11 3 8.8 35 0568699 E012M10X1.25
12 1.00 89 16 9.0 7.1 10 3 11.0 0568705 E012M12X1.0
12 1.25 89 16 9.0 7.1 10 3 10.8 0568712 E012M12X1.25
12 1.50 89 16 9.0 7.1 10 3 10.5 0568729 E012M12X1.5
14 1.50 95 18 11.2 9.0 12 3 12.5 0568736 E012M14X1.5
16 1.00 102 18 12.5 10.0 13 4 15.0 0568743 E012M16X1.0
16 1.50 102 18 12.5 10.0 13 4 14.5 0568750 E012M16X1.5
18 1.50 112 29 14.0 11.2 14 4 16.5 0568767 E012M18X1.5
20 1.50 112 29 14.0 11.2 14 4 18.5 0568774 E012M20X1.5
22 1.50 118 29 16.0 12.5 16 4 20.5 0568781 E012M22X1.5
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 297
www.precisiondormer.com
E013
Ŷ
Ɣ
MF P
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
40.50 53 7 4.0 3.15 6 3 3.5 19 0568798 E013M4X.5
50.50 58 8 5.0 4.0 7 3 4.5 22 0568804 E013M5X.5
60.50 66 10 6.3 5.0 8 3 5.5 27 0568811 E013M6X.5
60.75 66 10 6.3 5.0 8 3 5.3 27 0568828 E013M6X.75
80.75 72 12 8.0 6.3 9 3 7.3 31 0568835 E013M8X.75
81.00 72 12 8.0 6.3 9 3 7.0 31 0568842 E013M8X1.0
10 1.00 80 15 10.0 8.0 11 3 9.0 35 0568859 E013M10X1.0
10 1.25 80 15 10.0 8.0 11 3 8.8 35 0568866 E013M10X1.25
12 1.00 89 16 9.0 7.1 10 3 11.0 0568873 E013M12X1.0
12 1.25 89 16 9.0 7.1 10 3 10.8 0568880 E013M12X1.25
12 1.50 89 16 9.0 7.1 10 3 10.5 0568897 E013M12X1.5
14 1.50 95 18 11.2 9.0 12 3 12.5 0568903 E013M14X1.5
16 1.00 102 18 12.5 10.0 13 4 15.0 0568910 E013M16X1.0
16 1.50 102 18 12.5 10.0 13 4 14.5 0568927 E013M16X1.5
18 1.50 112 29 14.0 11.2 14 4 16.5 0568934 E013M18X1.5
20 1.50 112 29 14.0 11.2 14 4 18.5 0568941 E013M20X1.5
22 1.50 118 29 16.0 12.5 16 4 20.5 0568958 E013M22X1.5
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
298 www.precisiondormer.com
E050 - E051
E050
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
30.50 48 6 3.15 2.50 5 3 2.5 12.5 0606247 E050M3
40.70 53 7 4.00 3.15 6 3 3.3 19 0606254 E050M4
50.80 58 8 5.00 4.00 7 3 4.2 22 0606261 E050M5
61.00 66 10 6.30 5.00 8 3 5.0 27 0606278 E050M6
81.25 72 12 8.00 6.30 9 3 6.8 31 0606285 E050M8
10 1.50 80 15 10.00 8.00 11 3 8.5 35 0606292 E050M10
12 1.75 89 16 9.00 7.10 10 3 10.3 0606308 E050M12
16 2.00 102 18 12.50 10.00 13 4 14.0 0606315 E050M16
20 2.50 112 29 14.00 11.20 14 4 17.5 0606322 E050M20
E051
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
61.00 66 10 6.30 5.00 8 3 5 27 0606339 E051M6
81.25 72 12 8.00 6.30 9 3 6.8 31 0606346 E051M8
10 1.50 80 15 10.0 8.00 11 3 8.5 35 0606353 E051M10
12 1.75 89 16 9.00 7.10 10 3 10.3 0606360 E051M12
16 2.00 102 18 12.50 10.00 13 4 14 0606377 E051M16
20 2.50 112 29 14.00 11.20 14 4 17.5 0606384 E051M20
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral Flute for mild steel
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 299
www.precisiondormer.com
E048 - E044
E048
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
Stock #
EDP #
or
e-Code
30.50 48 6 3.15 2.5 5 3 2.5 15 0606063 E048M3
40.70 53 7 4.0 3.15 6 3 3.3 19 0606070 E048M4
50.80 58 8 5.0 4.0 7 3 4.2 22 0606087 E048M5
61.00 66 10 6.3 5.0 8 3 5 27 0606094 E048M6
81.25 72 12 8.0 6.3 9 3 6.8 31 0606100 E048M8
10 1.50 80 15 10.0 8.0 11 3 8.5 35 0606117 E048M10
12 1.75 89 16 9.0 7.1 10 3 10.3 0606124 E048M12
16 2.00 102 18 12.50 10.0 13 4 14 0606131 E048M16
20 2.50 112 22 14 11.2 14 4 17.5 0606148 E048M20
E044
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
81.25 72 17 8.00 6.30 8 3 6.8 32 0605745 E044M8
10 1.50 80 20 10.00 8.00 9 3 8.5 36 0605752 E044M10
12 1.75 89 22 9.00 7.10 10 3 10.3 0605769 E044M12
16 2.00 102 24 12.50 10.00 13 4 14 0605776 E044M16
20 2.50 112 29 14.00 11.20 14 4 17.5 0605783 E044M20
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral fl ute, for stainless steel
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
300 www.precisiondormer.com
E052 - E058
E052
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
30.50 48 12.5 3.15 2.50 5 3 2.5 12.5 0606391 E052M3
40.70 53 14 4.00 3.15 6 3 3.3 14 0606407 E052M4
50.80 58 11 5.00 4.00 7 3 4.2 22 0606414 E052M5
61.00 66 13 6.30 5.00 8 3 5 26 0606421 E052M6
81.25 72 16 8.00 6.30 9 3 6.8 29 0606438 E052M8
10 1.50 80 18 10.00 8.00 11 3 8.5 34 0606445 E052M10
12 1.75 89 22 9.00 7.10 10 3 10.3 0606452 E052M12
16 2.00 102 24 12.50 10.00 13 4 14 0606469 E052M16
E058
Ŷ
Ɣ
UNC TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes
l4
mm Stock #
EDP #
or
e-Code
632 3.505 50 14 3.55 2.80 5 3 2.85 14 0606957 E0586-32
832 4.166 53 9.5 4.50 3.55 6 3 3.50 17 0606964 E0588-32
10 24 4.826 58 11 5.00 4.00 7 3 3.90 20 0606971 E05810-24
1/4 20 6.350 66 13 6.30 5.00 8 3 5.10 28 0606988 E0581/4
5/16 18 7.938 72 16 8.00 6.30 9 3 6.60 31 0606995 E0585/16
3/8 16 9.525 80 18 10.00 8.00 11 3 8.00 34 0607008 E0583/8
1/2 13 12.700 89 22 9.00 7.10 10 3 10.80 0607015 E0581/2
5/8 11 15.875 102 24 12.50 10.00 13 4 13.50 0607022 E0585/8
3/4 10 19.050 112 29 14.00 11.20 14 4 16.50 0607039 E0583/4
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral fl ute, for aluminum
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
ƔSpiral fl ute, for mild steel
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 301
www.precisiondormer.com
1582(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
440 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 1010905
440 1.7/8 9/16 0.141 0.110 3/16 2 H2 B 1010906
540 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 1010907
540 1.15/16 5/8 0.141 0.110 3/16 2 H2 B 1010908
632 2“ 11/16 0.141 0.110 3/16 2 H3 P 1010909
632 2“ 11/16 0.141 0.110 3/16 2 H3 B 1010910
832 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 1010913
832 2.1/8 3/4 0.168 0.131 1/4 2 H3 B 1010914
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 1010915
10 24 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 1010916
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 P 1010917
10 32 2.3/8 7/8 0.194 0.152 1/4 2 H3 B 1010918
Ɣ
Ɣ
1582(UNC)
1582(UNF)
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
ƔSpiral fl ute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
302 www.precisiondormer.com
1586(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 1010346
1/4 20 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 1010347
1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 1010348
1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 1010349
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1010354
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 1010355
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1010358
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 B 1010359
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1010362
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 B 1010363
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1010366
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010367
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 P 1010350
1/4 28 2.1/2 1“ 0.255 0.191 5/16 2 H3 B 1010351
1/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 1010352
1/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 1010353
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1010356
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 1010357
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1010360
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 B 1010361
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1010368
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010369
Ɣ
Ɣ
1586(UNC)
1586(UNF)
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
ƔSpiral fl ute
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
ƔSpiral fl ute
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 303
www.precisiondormer.com
1587(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
348 1.13/16 1/2 0.141 0.110 3/16 2 H2 P 1010885
348 1.13/16 1/2 0.141 0.110 3/16 2 H2 B 1010886
440 1.7/8 9/16 0.141 0.110 3/16 2 H2 P 1010887
440 1.7/8 9/16 0.141 0.110 3/16 2 H2 B 1010888
540 1.15/16 5/8 0.141 0.110 3/16 2 H2 P 1010889
540 1.15/16 5/8 0.141 0.110 3/16 2 H2 B 1010890
632 2“ 11/16 0.141 0.110 3/16 2 H3 P 1010891
632 2“ 11/16 0.141 0.110 3/16 2 H3 B 1010892
832 2.1/8 3/4 0.168 0.131 1/4 3 H3 P 1010895
832 2.1/8 3/4 0.168 0.131 1/4 3 H3 B 1010896
10 24 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 1010897
10 24 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 1010898
12 24 2.3/8 15/16 0.220 0.165 9/32 3 H3 P 1010901
12 24 2.3/8 15/16 0.220 0.165 9/32 3 H3 B 1010902
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
10 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 1010899
10 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 1010900
Ŷ
Ɣ
Ŷ
Ɣ
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ɣ High-spiral helicut
Ɣ The higher helix angle gives
improved chip removal
1587(UNC)
1587(UNF)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
304 www.precisiondormer.com
1588(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1.000 0.255 0.191 5/16 3 H3 P 1010398
1/4 20 2.1/2 1.000 0.255 0.191 5/16 3 H3 B 1010399
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1010402
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 1010403
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1010406
3/8 16 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 B 1010407
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1010410
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 B 1010411
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1010414
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010415
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1.000 0.255 0.191 5/16 3 H3 P 1010400
1/4 28 2.1/2 1.000 0.255 0.191 5/16 3 H3 B 1010401
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1010404
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 1010405
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 P 1010408
3/8 24 2.15/16 1.1/4 0.381 0.286 7/16 3 H3 B 1010409
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1010412
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 B 1010413
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1010416
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010417
Ɣ
Ŷ
Ɣ
Ŷ
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ɣ High-spiral helicut
Ɣ The higher helix angle gives
improved chip removal
1588(UNF)
1588(UNC)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 305
www.precisiondormer.com
1788(M)
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
M3 0.50 1.15/16 5/8 0.141 0.110 3/16 2 D3 P 1012920
M3 0.50 1.15/16 5/8 0.141 0.110 3/16 2 D3 B 1012940
M3.5 0.60 2“ 11/16 0.141 0.110 3/16 2 D4 P 1012922
M3.5 0.60 2“ 11/16 0.141 0.110 3/16 2 D4 B 1012942
M4 0.70 2.1/8 3/4 0.168 0.131 1/4 3 D4 P 1012923
M4 0.70 2.1/8 3/4 0.168 0.131 1/4 3 D4 B 1012943
M4.5 0.75 2.3/8 7/8 0.194 0.152 1/4 3 D4 P 1012924
M4.5 0.75 2.3/8 7/8 0.194 0.152 1/4 3 D4 B 1012944
M5 0.80 2.3/8 7/8 0.194 0.152 1/4 3 D4 P 1012925
M5 0.80 2.3/8 7/8 0.194 0.152 1/4 3 D4 B 1012945
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 3 D5 P 1012926
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 3 D5 B 1012946
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 3 D5 P 1012928
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 3 D5 B 1012948
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 3 D6 P 1012930
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 3 D6 B 1012950
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 3 D6 P 1012932
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 3 D6 B 1012952
Ɣ
Ŷ
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ɣ High-spiral helicut
Ɣ The higher helix angle gives
improved chip removal
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
306 www.precisiondormer.com
1590(UNC) (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
632 2“ 11/16 0.141 0.110 3/16 2 H3 P 1010937
632 2“ 11/16 0.141 0.110 3/16 2 H3 B 1010938
832 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 1010941
832 2.1/8 3/4 0.168 0.131 1/4 2 H3 B 1010942
10 24 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 1010945
10 24 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 1010946
12 24 2.3/8 15/16 0.220 0.165 9/32 3 H3 P 1010949
12 24 2.3/8 15/16 0.220 0.165 9/32 3 H3 B 1010950
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
640 2“ 11/16 0.141 0.110 3/16 2 H3 P 1010939
640 2“ 11/16 0.141 0.110 3/16 2 H3 B 1010940
836 2.1/8 3/4 0.168 0.131 1/4 2 H3 P 1010943
836 2.1/8 3/4 0.168 0.131 1/4 2 H3 B 1010944
10 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 P 1010947
10 32 2.3/8 7/8 0.194 0.152 1/4 3 H3 B 1010948
12 28 2.3/8 15/16 0.220 0.165 9/32 3 H3 P 1010951
12 28 2.3/8 15/16 0.220 0.165 9/32 3 H3 B 1010952
Ŷ
Ɣ
Ŷ
Ɣ
1590(UNC)
1590(UNF)
ƔMachine Tap
ƔSpiral fl ute, heavy-duty
ƔRecommended for use in ferrous
materials and higher strength alloys
where regular or fast spiral designs
perform marginally
Ɣ A slower helix angle, large core diameter,
and wider throat dimensions than the
regular 1587/1588 series
Ɣ Tarauds machine ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 307
www.precisiondormer.com
1591(UNC) - (UNF)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 1010953
1/4 20 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 1010954
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1010957
5/16 18 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 1010958
3/8 16 2.5/16 1.1.4 0.381 0.286 7/16 3 H3 P 1010961
3/8 16 2.5/16 1.1.4 0.381 0.286 7/16 3 H3 B 1010962
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1010965
7/16 14 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 B 1010966
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1010969
1/2 13 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010970
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes Limits Chamfer
EDP #
or
e-Code
1/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H3 P 1010955
1/4 28 2.1/2 1“ 0.255 0.191 5/16 3 H3 B 1010956
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 P 1010959
5/16 24 2.23/32 1.1/8 0.318 0.238 3/8 3 H3 B 1010960
3/8 24 2.5/16 1.1.4 0.381 0.286 7/16 3 H3 P 1010963
3/8 24 2.5/16 1.1.4 0.381 0.286 7/16 3 H3 B 1010964
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 P 1010967
7/16 20 3.5/32 1.7/16 0.323 0.242 13/32 3 H3 B 1010968
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 P 1010971
1/2 20 3.3/8 1.21/32 0.367 0.275 7/16 3 H3 B 1010972
Ŷ
Ɣ
Ŷ
Ɣ
1591(UNF)
1591(UNC)
ƔMachine Tap
ƔSpiral fl ute, heavy-duty
ƔRecommended for use in ferrous
materials and higher strength alloys
where regular or fast spiral designs
perform marginally
Ɣ A slower helix angle, large core diameter,
and wider throat dimensions than the
regular 1587/1588 series
Ɣ Tarauds machine ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
308 www.precisiondormer.com
E029
Ŷ
Ɣ
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Inch Stock #
EDP #
or
e-Code
256 1.3/4 0.3140 0.1410 0.1100 3 N47 2.0 0.3140 0583210 E0292-56
440 1.7/8 0.6091 0.1410 0.1100 3 N39 2.6 0.6091 0581810 E0294-40
632 2“ 0.2610 0.1410 0.1100 3 1/8 3.2 0.5938 0581827 E0296-32
832 2.1/8 0.2484 0.1680 0.1310 3 N25 3.8 0.6526 0581834 E0298-32
10 24 2.3/8 0.4303 0.1940 0.1520 4 11/64 4.4 0.8434 0581841 E02910-24
12 24 2.3/8 0.4173 0.2200 0.1650 4 N9 5.0 0.8848 0581858 E02912-24
1/4 20 2.1/2 0.5075 0.2550 0.1910 4 5.8 1.0073 0581865 E0291/4
5/16 18 2.23/32 0.5939 0.3180 0.2380 5 7.3 1.1891 0581872 E0295/16
3/8 16 2.15/16 0.6020 0.3810 0.2860 6 11/32 8.8 1.2915 0581889 E0293/8
7/16 14 3.5/32 0.9055 0.3230 0.2420 6 Y 10.3 0581896 E0297/16
1/2 13 3.3/8 0.9055 0.3670 0.2750 6 15/32 11.9 0581902 E0291/2
5/8 11 3.13/16 0.9843 0.4800 0.3600 8 37/64 14.8 0581919 E0295/8
3/4 10 4-1/4 1.1614 0.5900 0.4420 8 45/64 17.9 0581926 E0293/4
7/8 9 4.11/16 1.1614 0.6970 0.5230 8 53/64 21.0 0581933 E0297/8
1“ 8 5-1/8 1.3976 0.8000 0.6000 8 61/64 24.0 0581940 E0291
Ɣ Thread Forming Taps MTT-X Ɣ MTT-X Tarauds machine ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 309
www.precisiondormer.com
E064 - E039
E064
Ɣ
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Inch Stock #
EDP #
or
e-Code
440 1.7/8 0.6091 0.1410 0.1100 3 N39 2.6 0.6091 0582633 E0644-40
632 2“ 0.2610 0.1410 0.1100 3 1/8 3.2 0.5938 0582640 E0646-32
832 2.1/8 0.2484 0.1680 0.1310 3 N25 3.8 0.6526 0582657 E0648-32
10 24 2.3/8 0.4303 0.1940 0.1520 4 11/64 4.4 0.8434 0582664 E06410-24
12 24 2.3/8 0.4173 0.2200 0.1650 4 N9 5.0 0.8848 0582671 E06412-24
1/4 20 2.1/2 0.5075 0.2550 0.1910 4 5.8 1.0073 0582688 E0641/4
5/16 18 2.23/32 0.5939 0.3180 0.2380 5 7.3 1.1891 0582695 E0645/16
3/8 16 2.15/16 0.6020 0.3810 0.2860 6 11/32 8.8 1.2915 0582701 E0643/8
E039
Ŷ
Ɣ
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Inch Stock #
EDP #
or
e-Code
080 1.5/8 0.3125 0.1410 0.1100 3 N54 1.4 0.3125 0583234 E0390-80
10 32 2.3/8 0.4303 0.2200 0.1650 4 N16 4.5 0.8434 0582558 E03910-32
1/4 28 2.1/2 0.5075 0.2550 0.1910 4 A 6.0 1.0073 0582565 E0391/4
5/16 24 2.23/32 0.5939 0.3180 0.2380 5 M 7.5 1.1891 0582572 E0395/16
3/8 24 2.15/16 0.6020 0.3810 0.2860 6 T 9.1 1.2915 0582589 E0393/8
7/16 20 3.5/32 0.9055 0.3230 0.2420 6 Z 10.6 0582596 E0397/16
1/2 20 3.3/8 0.9055 0.3670 0.2750 6 0.4760 12.1 0582602 E0391/2
5/8 18 3.13/16 0.9843 0.4800 0.3600 8 39/64 15.3 0582619 E0395/8
3/4 16 4.1/4 1.1614 0.5900 0.4420 8 23/32 18.3 0582626 E0393/4
Ɣ MTT-X Tarauds machineƔ Thread Forming Taps MTT-X ƔMTT-X Machos de máquina
Ɣ MTT-X Tarauds machineƔ Thread Forming Taps MTT-X ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
310 www.precisiondormer.com
E074 - E009
E074
Ɣ
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Inch Stock #
EDP #
or
e-Code
10 32 2.3/8 0.4303 0.2200 0.1650 4 N16 4.5 0.8434 0582879 E07410-32
1/4 28 2.1/2 0.5075 0.2550 0.1910 4 A 6.0 1.0073 0582886 E0741/4
5/16 24 2.23/32 0.5939 0.3180 0.2380 5 M 7.5 1.1891 0582893 E0745/16
3/8 24 2.15/16 0.6020 0.3810 0.2860 6 T 9.1 1.2915 0582909 E0743/8
E009
Ŷ
Ɣ
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Inch Stock #
EDP #
or
e-Code
30.50 2“ 0.7404 0.1410 0.1100 3 2.8 0.7404 N35 0580806 E009M3
40.70 2.1/8 0.2484 0.1680 0.1310 4 3.7 0.6526 0580813 E009M4
50.80 2.3/8 0.4303 0.1940 0.1520 4 4.6 0.8434 N14 0580820 E009M5
61.00 2.1/2 0.5075 0.2550 0.1910 4 5.5 1.0073 7/32 0580837 E009M6
81.25 2.23/32 0.5939 0.3180 0.2380 5 7.4 1.1891 0580844 E009M8
10 1.50 2.15/16 0.6020 0.3810 0.2860 6 9.3 1.2915 0580851 E009M10
12 1.75 3.3/8 0.9055 0.3670 0.2750 6 11.2 7/16 0580868 E009M12
14 2.00 3.19/32 0.9843 0.4290 0.3220 8 13.0 0580875 E009M14
16 2.00 3.13/16 0.9843 0.4800 0.3600 8 15.0 0580882 E009M16
20 2.50 4.15/32 1.1614 0.4890 0.4890 8 18.8 0580899 E009M20
24 3.00 5.1/8 1.3976 0.8000 0.6000 8 22.5 0580905 E009M24
Ɣ MTT-X Tarauds machineƔ Thread Forming Taps MTT-X ƔMTT-X Machos de máquina
Ɣ MTT-X Tarauds machineƔ Thread Forming Taps MTT-X ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 311
www.precisiondormer.com
E094 - E097
E094
Ɣ
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
#
Flutes
l4
Inch Stock #
EDP #
or
e-Code
30.50 2“ 0.7404 0.1410 0.1100 3 2.8 0.7404 N35 0583128 E094M3
40.70 2.1/8 0.2484 0.1680 0.1310 4 3.7 0.6526 0583135 E094M4
50.80 2.3/8 0.4303 0.1940 0.1520 4 4.6 0.8434 N14 0583142 E094M5
61.00 2.1/2 0.5075 0.2550 0.1910 4 5.5 1.0073 7/32 0583159 E094M6
81.25 2.23/32 0.5939 0.3180 0.2380 5 7.4 1.1891 0583166 E094M8
10 1.50 2.15/16 0.6020 0.3810 0.2860 6 9.3 1.2915 0583173 E094M10
E097
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm
l4
mm Stock #
EDP #
or
e-Code
20.40 41 8 2.50 2.00 4 1.8 8 0599884 E097M2 1)
2.5 0.45 44.5 9.5 2.80 2.24 5 2.3 9.5 0599891 E097M2.5 1)
30.50 48 12.5 3.15 2.50 5 2.8 12.5 0599907 E097M3
40.70 53 14 4.00 3.15 6 3.7 14 0599914 E097M4
50.80 58 11 5.00 4.00 7 4.6 22 0599921 E097M5
61.00 66 13 6.30 5.00 8 5.5 26 0599938 E097M6
81.25 72.0 16 8.00 6.30 9 7.4 29 0599945 E097M8
10 1.50 80.0 18 10.00 8.00 11 9.3 34 0599952 E097M10
12 1.75 89.0 22 9.00 7.10 10 11.2 0599969 E097M12
16 2.00 102.0 24 12.50 10.00 13 15 0599976 E097M16
1) Steel HSCo
Ɣ MTT-X Tarauds machineƔ Thread Forming Taps MTT-X ƔMTT-X Machos de máquina
Ɣ MTT-X Tarauds machineƔ Thread Forming Taps MTT-X ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
312 www.precisiondormer.com
E098 - E099
E098
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm
l4
mm Stock #
EDP #
or
e-Code
30.50 48 12.5 3.15 2.50 5 2.8 12.5 0599983 E098M3
40.70 53 14 4.00 3.15 6 3.7 14 0599990 E098M4
50.80 58 11 5.00 4.00 7 4.6 22 0600009 E098M5
61.00 66 13 6.30 5.00 8 5.5 26 0600016 E098M6
81.25 72 16 8.00 6.30 9 7.4 29 0600023 E098M8
10 1.50 80 18 10.00 8.00 11 9.3 34 0600030 E098M10
E099
Ŷ
Ɣ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm
l4
mm Stock #
EDP #
or
e-Code
40.70 53 14 4.00 3.15 6 3.7 14 0600047 E099M4
50.80 58 11 5.00 4.00 7 4.6 22 0600054 E099M5
61.00 66 13 6.30 5.00 8 5.5 26 0600061 E099M6
81.25 72 16 8.00 6.30 9 7.4 29 0600078 E099M8
10 1.50 80 18 10.00 8.00 11 9.3 34 0600085 E099M10
12 1.75 89 22 9.00 7.10 10 11.2 0600092 E099M12
16 2.00 102 24 12.50 10.00 13 15 0600108 E099M16
Ɣ MTT-X Tarauds machineƔ Thread Forming Taps MTT-X ƔMTT-X Machos de máquina
ƔShort chamfer
Ɣ MTT-X Tarauds machineƔ Thread Forming Taps MTT-X ƔMTT-X Machos de máquina
ƔOil grooves, internal coolant, radial outlet
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 313
www.precisiondormer.com
E080
Ŷ
MP
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm
l4
mm Stock #
EDP #
or
e-Code
20.40 41.0 8 2.50 2.00 4 1.8 8 0599518 E080M2 1)
2.5 0.45 44.5 9.5 2.80 2.24 5 2.3 9.5 0599525 E080M2.5 1)
30.50 48.0 12.5 3.15 2.50 5 2.8 12.5 0599532 E080M3
40.70 53.0 14 4.00 3.15 6 3.7 14 0599549 E080M4
50.80 58.0 11 5.00 4.00 7 4.6 22 0599556 E080M5
61.00 66.0 13 6.30 5.00 8 5.5 26 0599563 E080M6
81.25 72.0 16 8.00 6.30 9 7.4 29 0599570 E080M8
1) Steel HSCo
Ɣ MTT-X Tarauds machineƔ Thread Forming Taps MTT-X ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
314 www.precisiondormer.com
1580(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch Limits Chamfer
EDP #
or
e-Code
164 1.11/16 3/8 0.141 0.110 3/16 H2 B 1310002
256 1.3/4 7/16 0.141 0.110 3/16 H2 B 1310004
256 1.3/4 7/16 0.141 0.110 3/16 H3 B 1310005
348 1.13/16 1/2 0.141 0.110 3/16 H2 B 1310008
348 1.13/16 1/2 0.141 0.110 3/16 H3 B 1310009
440 1.7/8 9/16 0.141 0.110 3/16 H3 P 1310012
440 1.7/8 9/16 0.141 0.110 3/16 H3 B 1310014
440 1.7/8 9/16 0.141 0.110 3/16 H5 P 1310013
440 1.7/8 9/16 0.141 0.110 3/16 H5 B 1310015
540 1.15/16 5/8 0.141 0.110 3/16 H3 P 1310020
540 1.15/16 5/8 0.141 0.110 3/16 H3 B 1310022
540 1.15/16 5/8 0.141 0.110 3/16 H5 P 1310021
540 1.15/16 5/8 0.141 0.110 3/16 H5 B 1310023
632 2“ 11/16 0.141 0.110 3/16 H3 P 1310028
632 2“ 11/16 0.141 0.110 3/16 H3 B 1310031
632 2“ 11/16 0.141 0.110 3/16 H5 P 1310029
632 2“ 11/16 0.141 0.110 3/16 H5 B 1310032
832 2.1/8 3/4 0.168 0.131 1/4 H3 P 1310038
832 2.1/8 3/4 0.168 0.131 1/4 H3 B 1310041
832 2.1/8 3/4 0.168 0.131 1/4 H5 P 1310039
832 2.1/8 3/4 0.168 0.131 1/4 H5 B 1310042
10 24 2.3/8 7/8 0.194 0.152 1/4 H4 P 1310048
10 24 2.3/8 7/8 0.194 0.152 1/4 H4 B 1310051
10 24 2.3/8 7/8 0.194 0.152 1/4 H6 P 1310049
10 24 2.3/8 7/8 0.194 0.152 1/4 H6 B 1310052
12 24 2.3/8 15/16 0.220 0.165 9/32 H4 P 1310060
12 24 2.3/8 15/16 0.220 0.165 9/32 H4 B 1310062
12 24 2.3/8 15/16 0.220 0.165 9/32 H6 B 1310063
1/4 20 2.1/2 1“ 0.255 0.191 5/16 H4 P 1310068
1/4 20 2.1/2 1“ 0.255 0.191 5/16 H4 B 1310071
1/4 20 2.1/2 1“ 0.255 0.191 5/16 H6 P 1310069
1/4 20 2.1/2 1“ 0.255 0.191 5/16 H6 B 1310072
5/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H5 P 1310078
5/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H5 B 1310080
5/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H7 B 1310081
3/8 16 2.15/16 1.1/4 0.381 0.286 1/2 H5 P 1310086
3/8 16 2.15/16 1.1/4 0.381 0.286 1/2 H5 B 1310088
7/16 14 3.5/32 1.7/16 0.323 0.242 9/16 H5 P 1310094
7/16 14 3.5/32 1.7/16 0.323 0.242 9/16 H5 B 1310096
1/2 13 3.3/8 1.21/32 0.367 0.275 23/32 H5 P 1310102
1/2 13 3.3/8 1.21/32 0.367 0.275 23/32 H5 B 1310104
Ŷ
Ɣ
Ɣ Tarauds machineƔ Thread Forming Taps Ɣ Machos de máquina
ƔRol-Rite
Ɣ The Rol-Rite spiral forming lobe
pattern reduces tapping torque
but has no lube grooves
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 315
www.precisiondormer.com
1580(UNF)
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch Limits Chamfer
EDP #
or
e-Code
080 1.5/8 5/16 0.141 0.110 3/16 H2 B 1310001
172 1.11/16 3/8 0.141 0.110 3/16 H2 B 1310003
264 1.3/4 7/16 0.141 0.110 3/16 H2 B 1310006
264 1.3/4 7/16 0.141 0.110 3/16 H3 B 1310007
356 1.13/16 1/2 0.141 0.110 3/16 H2 B 1310010
356 1.13/16 1/2 0.141 0.110 3/16 H3 B 1310011
448 1.7/8 9/16 0.141 0.110 3/16 H3 P 1310016
448 1.7/8 9/16 0.141 0.110 3/16 H3 B 1310018
544 1.15/16 5/8 0.141 0.110 3/16 H3 P 1310024
544 1.15/16 5/8 0.141 0.110 3/16 H3 B 1310026
640 2“ 11/16 0.141 0.110 3/16 H3 P 1310034
640 2“ 11/16 0.141 0.110 3/16 H3 B 1310036
640 2“ 11/16 0.141 0.110 3/16 H5 P 1310035
640 2“ 11/16 0.141 0.110 3/16 H5 B 1310037
836 2.1/8 3/4 0.168 0.131 1/4 H3 P 1310044
836 2.1/8 3/4 0.168 0.131 1/4 H3 B 1310046
10 32 2.3/8 7/8 0.194 0.152 1/4 H4 P 1310054
10 32 2.3/8 7/8 0.194 0.152 1/4 H4 B 1310057
10 32 2.3/8 7/8 0.194 0.152 1/4 H6 P 1310055
10 32 2.3/8 7/8 0.194 0.152 1/4 H6 B 1310058
12 28 2.3/8 15/16 0.220 0.165 9/32 H4 P 1310064
12 28 2.3/8 15/16 0.220 0.165 9/32 H4 B 1310066
12 28 2.3/8 15/16 0.220 0.165 9/32 H6 B 1310067
1/4 28 2.1/2 1“ 0.255 0.191 5/16 H4 P 1310074
1/4 28 2.1/2 1“ 0.255 0.191 5/16 H4 B 1310076
5/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H5 P 1310082
5/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H5 B 1310084
5/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H7 B 1310085
3/8 24 2.15/16 1.1/4 0.381 0.286 1/2 H5 P 1310090
3/8 24 2.15/16 1.1/4 0.381 0.286 1/2 H5 B 1310092
7/16 20 3.5/32 1.7/16 0.323 0.242 9/16 H5 P 1310098
7/16 20 3.5/32 1.7/16 0.323 0.242 9/16 H5 B 1310100
1/2 20 3.3/8 1.21/32 0.367 0.275 23/32 H5 P 1310106
1/2 20 3.3/8 1.21/32 0.367 0.275 23/32 H5 B 1310108
Ŷ
Ɣ
Ɣ Tarauds machineƔ Thread Forming Taps Ɣ Machos de máquina
ƔRol-Rite
Ɣ The Rol-Rite spiral forming lobe
pattern reduces tapping torque
but has no lube grooves
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
316 www.precisiondormer.com
1580(M)
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch Limits Chamfer
EDP #
or
e-Code
M3 0.50 1.15/16 5/8 0.141 0.110 3/16 D5 P 1310400
M3 0.50 1.15/16 5/8 0.141 0.110 3/16 D5 B 1310401
M4 0.70 2.1/8 3/4 0.168 0.131 1/4 D6 P 1310402
M4 0.70 2.1/8 3/4 0.168 0.131 1/4 D6 B 1310403
M5 0.80 2.3/8 7/8 0.194 0.152 1/4 D7 P 1310404
M5 0.80 2.3/8 7/8 0.194 0.152 1/4 D7 B 1310405
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 D8 P 1310406
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 D8 B 1310407
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 D9 P 1310408
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 D9 B 1310409
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 D10 P 1310410
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 D10 B 1310411
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 D11 P 1310412
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 D11 B 1310413
Ŷ
Ɣ
Ɣ Tarauds machineƔ Thread Forming Taps Ɣ Machos de máquina
ƔRol-Rite
Ɣ The Rol-Rite spiral forming lobe
pattern reduces tapping torque
but has no lube grooves
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 317
www.precisiondormer.com
3300(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch Limits Chamfer
EDP #
or
e-Code
164 1.11/16 3/8 0.141 0.110 3/16 H2 B 1310111
256 1.3/4 7/16 0.141 0.110 3/16 H2 B 1310113
256 1.3/4 7/16 0.141 0.110 3/16 H3 B 1310114
348 1.13/16 1/2 0.141 0.110 3/16 H3 B 1310118
440 1.7/8 9/16 0.141 0.110 3/16 H3 P 1310121
440 1.7/8 9/16 0.141 0.110 3/16 H3 B 1310123
440 1.7/8 9/16 0.141 0.110 3/16 H5 P 1310122
440 1.7/8 9/16 0.141 0.110 3/16 H5 B 1310124
540 1.15/16 5/8 0.141 0.110 3/16 H3 P 1310129
540 1.15/16 5/8 0.141 0.110 3/16 H3 B 1310131
540 1.15/16 5/8 0.141 0.110 3/16 H5 P 1310130
540 1.15/16 5/8 0.141 0.110 3/16 H5 B 1310132
632 2“ 11/16 0.141 0.110 3/16 H3 P 1310137
632 2“ 11/16 0.141 0.110 3/16 H3 B 1310140
632 2“ 11/16 0.141 0.110 3/16 H5 P 1310138
632 2“ 11/16 0.141 0.110 3/16 H5 B 1310141
832 2.1/8 3/4 0.168 0.131 1/4 H3 P 1310147
832 2.1/8 3/4 0.168 0.131 1/4 H3 B 1310150
832 2.1/8 3/4 0.168 0.131 1/4 H5 P 1310148
832 2.1/8 3/4 0.168 0.131 1/4 H5 B 1310151
10 24 2.3/8 7/8 0.194 0.152 1/4 H4 P 1310157
10 24 2.3/8 7/8 0.194 0.152 1/4 H4 B 1310160
10 24 2.3/8 7/8 0.194 0.152 1/4 H6 P 1310158
10 24 2.3/8 7/8 0.194 0.152 1/4 H6 B 1310161
12 24 2.3/8 15/16 0.220 0.165 9/32 H4 P 1310169
12 24 2.3/8 15/16 0.220 0.165 9/32 H4 B 1310171
12 24 2.3/8 15/16 0.220 0.165 9/32 H6 B 1310172
1/4 20 2.1/2 1“ 0.255 0.191 5/16 H4 P 1310177
1/4 20 2.1/2 1“ 0.255 0.191 5/16 H4 B 1310180
1/4 20 2.1/2 1“ 0.255 0.191 5/16 H6 P 1310178
1/4 20 2.1/2 1“ 0.255 0.191 5/16 H6 B 1310181
5/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H5 P 1310187
5/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H5 B 1310189
5/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H7 P 1310188
5/16 18 2.23/32 1.1/8 0.318 0.238 7/16 H7 B 1310190
3/8 16 2.15/16 1.1/4 0.381 0.286 1/2 H5 P 1310195
3/8 16 2.15/16 1.1/4 0.381 0.286 1/2 H5 B 1310197
3/8 16 2.15/16 1.1/4 0.381 0.286 1/2 H7 P 1310196
3/8 16 2.15/16 1.1/4 0.381 0.286 1/2 H7 B 1310198
7/16 14 3.5/32 1.7/16 0.323 0.242 9/16 H5 P 1310203
7/16 14 3.5/32 1.7/16 0.323 0.242 9/16 H5 B 1310205
1/2 13 3.3/8 1.21/32 0.367 0.275 23/32 H5 P 1310211
1/2 13 3.3/8 1.21/32 0.367 0.275 23/32 H5 B 1310213
Ŷ
Ɣ
Ɣ Tarauds machineƔ Thread Forming Taps Ɣ Machos de máquina
ƔRol-Form
Ɣ The Rol-Form taps have lube
grooves for improved coolant
fl ow in sizes #6 and larger
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
318 www.precisiondormer.com
3300(UNF)
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch Limits Chamfer
EDP #
or
e-Code
080 1.5/8 5/16 0.141 0.110 3/16 H2 B 1310110
172 1.11/16 3/8 0.141 0.110 3/16 H2 B 1310112
264 1.3/4 7/16 0.141 0.110 3/16 H2 B 1310115
264 1.3/4 7/16 0.141 0.110 3/16 H3 B 1310116
356 1.13/16 1/2 0.141 0.110 3/16 H3 B 1310120
448 1.7/8 9/16 0.141 0.110 3/16 H3 P 1310125
448 1.7/8 9/16 0.141 0.110 3/16 H3 B 1310127
544 1.15/16 5/8 0.141 0.110 3/16 H3 P 1310133
544 1.15/16 5/8 0.141 0.110 3/16 H3 B 1310135
640 2“ 11/16 0.141 0.110 3/16 H3 P 1310143
640 2“ 11/16 0.141 0.110 3/16 H3 B 1310145
640 2“ 11/16 0.141 0.110 3/16 H5 B 1310146
836 2.1/8 3/4 0.168 0.131 1/4 H3 P 1310153
836 2.1/8 3/4 0.168 0.131 1/4 H3 B 1310155
10 32 2.3/8 7/8 0.194 0.152 1/4 H4 P 1310163
10 32 2.3/8 7/8 0.194 0.152 1/4 H4 B 1310166
10 32 2.3/8 7/8 0.194 0.152 1/4 H6 P 1310164
10 32 2.3/8 7/8 0.194 0.152 1/4 H6 B 1310167
12 28 2.3/8 15/16 0.220 0.165 9/32 H4 P 1310173
12 28 2.3/8 15/16 0.220 0.165 9/32 H4 B 1310175
1/4 28 2.1/2 1“ 0.255 0.191 5/16 H4 P 1310183
1/4 28 2.1/2 1“ 0.255 0.191 5/16 H4 B 1310185
5/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H5 P 1310191
5/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H5 B 1310193
5/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H7 P 1310192
5/16 24 2.23/32 1.1/8 0.318 0.238 7/16 H7 B 1310194
3/8 24 2.15/16 1.1/4 0.381 0.286 1/2 H5 P 1310199
3/8 24 2.15/16 1.1/4 0.381 0.286 1/2 H5 B 1310201
3/8 24 2.15/16 1.1/4 0.381 0.286 1/2 H7 P 1310200
3/8 24 2.15/16 1.1/4 0.381 0.286 1/2 H7 B 1310202
7/16 20 3.5/32 1.7/16 0.323 0.242 9/16 H5 P 1310207
7/16 20 3.5/32 1.7/16 0.323 0.242 9/16 H5 B 1310209
1/2 20 3.3/8 1.21/32 0.367 0.275 23/32 H5 P 1310215
1/2 20 3.3/8 1.21/32 0.367 0.275 23/32 H5 B 1310217
Ŷ
Ɣ
Ɣ Tarauds machineƔ Thread Forming Taps Ɣ Machos de máquina
ƔRol-Form
Ɣ The Rol-Form taps have lube
grooves for improved coolant
fl ow in sizes #6 and larger
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 319
www.precisiondormer.com
3300(M)
MP
mm
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch Limits Chamfer
EDP #
or
e-Code
M3 0.50 1.15/16 5/8 0.141 0.110 3/16 D5 P 1310500
M3 0.50 1.15/16 5/8 0.141 0.110 3/16 D5 B 1310501
M4 0.70 2.1/8 3/4 0.168 0.131 1/4 D6 P 1310502
M4 0.70 2.1/8 3/4 0.168 0.131 1/4 D6 B 1310503
M5 0.80 2.3/8 7/8 0.194 0.152 1/4 D7 P 1310504
M5 0.80 2.3/8 7/8 0.194 0.152 1/4 D7 B 1310505
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 D8 P 1310506
M6 1.00 2.1/2 1“ 0.255 0.191 5/16 D8 B 1310507
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 D9 P 1310508
M8 1.25 2.23/32 1.1/8 0.318 0.238 3/8 D9 B 1310509
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 D10 P 1310510
M10 1.50 2.15/16 1.1/4 0.381 0.286 7/16 D10 B 1310511
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 D11 P 1310512
M12 1.75 3.3/8 1.21/32 0.367 0.275 7/16 D11 B 1310513
Ŷ
Ɣ
Ɣ Tarauds machineƔ Thread Forming Taps Ɣ Machos de máquina
ƔRol-Form
Ɣ The Rol-Form taps have lube
grooves for improved coolant fl ow
in sizes M4 and larger
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
320 www.precisiondormer.com
3306E(UNC)
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch Limits Chamfer
EDP #
or
e-Code
440 4“ 9/16 0.141 0.110 3/16 H3 B 1321002
440 4“ 9/16 0.141 0.110 3/16 H5 B 1321004
632 4“ 11/16 0.141 0.110 3/16 H3 B 1321006
632 4“ 11/16 0.141 0.110 3/16 H5 B 1321008
632 6“ 11/16 0.141 0.110 3/16 H3 B 1321010
632 6“ 11/16 0.141 0.110 3/16 H5 B 1321012
832 4“ 3/4 0.168 0.131 1/4 H3 B 1321014
832 4“ 3/4 0.168 0.131 1/4 H5 B 1321016
832 6“ 3/4 0.168 0.131 1/4 H3 B 1321018
832 6“ 3/4 0.168 0.131 1/4 H5 B 1321020
10 24 4“ 7/8 0.194 0.152 1/4 H4 B 1321022
10 24 4“ 7/8 0.194 0.152 1/4 H6 B 1321024
10 24 6“ 7/8 0.194 0.152 1/4 H4 B 1321026
10 24 6“ 7/8 0.194 0.152 1/4 H6 B 1321028
1/4 20 4“ 1“ 0.255 0.191 5/16 H4 B 1321038
1/4 20 4“ 1“ 0.255 0.191 5/16 H6 B 1321040
1/4 20 4“ 1“ 0.255 0.191 5/16 H8 B 1321042
1/4 20 6“ 1“ 0.255 0.191 5/16 H4 B 1321044
1/4 20 6“ 1“ 0.255 0.191 5/16 H6 B 1321046
1/4 20 6“ 1“ 0.255 0.191 5/16 H8 B 1321048
5/16 18 4“ 1.1/8 0.318 0.238 3/8 H5 B 1321062
5/16 18 4“ 1.1/8 0.318 0.238 3/8 H7 B 1321064
5/16 18 4“ 1.1/8 0.318 0.238 3/8 H9 B 1321066
5/16 18 6“ 1.1/8 0.318 0.238 3/8 H5 B 1321068
5/16 18 6“ 1.1/8 0.318 0.238 3/8 H7 B 1321070
5/16 18 6“ 1.1/8 0.318 0.238 3/8 H9 B 1321072
3/8 16 4“ 1.1/4 0.381 0.286 7/16 H5 B 1321086
3/8 16 4“ 1.1/4 0.381 0.286 7/16 H7 B 1321088
3/8 16 4“ 1.1/4 0.381 0.286 7/16 H9 B 1321090
3/8 16 6“ 1.1/4 0.381 0.286 7/16 H5 B 1321092
3/8 16 6“ 1.1/4 0.381 0.286 7/16 H7 B 1321094
3/8 16 6“ 1.1/4 0.381 0.286 7/16 H9 B 1321096
Ŷ
Ɣ
l3
Ɣ Tarauds machineƔ Thread Forming Taps Ɣ Machos de máquina
ƔExtension Rol-Form
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 321
www.precisiondormer.com
3306E(UNF)
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch Limits Chamfer
EDP #
or
e-Code
10 32 4“ 7/8 0.194 0.152 1/4 H4 B 1321030
10 32 4“ 7/8 0.194 0.152 1/4 H6 B 1321032
10 32 6“ 7/8 0.194 0.152 1/4 H6 B 1321036
10 32 6“ 7/8 0.194 0.152 1/4 H4 B 1321034
1/4 28 4“ 1“ 0.255 0.191 5/16 H4 B 1321050
1/4 28 4“ 1“ 0.255 0.191 5/16 H6 B 1321052
1/4 28 4“ 1“ 0.255 0.191 5/16 H8 B 1321054
1/4 28 6“ 1“ 0.255 0.191 5/16 H4 B 1321056
1/4 28 6“ 1“ 0.255 0.191 5/16 H6 B 1321058
1/4 28 6“ 1“ 0.255 0.191 5/16 H8 B 1321060
5/16 24 4“ 1.1/8 0.318 0.238 3/8 H5 B 1321074
5/16 24 4“ 1.1/8 0.318 0.238 3/8 H7 B 1321076
5/16 24 4“ 1.1/8 0.318 0.238 3/8 H9 B 1321078
5/16 24 6“ 1.1/8 0.318 0.238 3/8 H5 B 1321080
5/16 24 6“ 1.1/8 0.318 0.238 3/8 H7 B 1321082
5/16 24 6“ 1.1/8 0.318 0.238 3/8 H9 B 1321084
Ŷ
Ɣ
l3
Ɣ Tarauds machineƔ Thread Forming Taps Ɣ Machos de máquina
ƔExtension Rol-Form
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
322 www.precisiondormer.com
Ɣ Tarauds machine
E710
E710
Ɣ
NPT TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm z Stock
No.
EDP #
or
e-Code
1/16 27 7.94 65 17 8.1 6.0 8 6.3 4 0159491 E7101/16NO3
1/8 27 10.29 70 19 11.1 8.3 10 8.5 4 0099889 E7101/8
1/4 18 13.72 75 27 14.3 10.7 11 11 4 0099872 E7101/4
3/8 18 17.15 80 27 17.8 13.5 13 14.5 4 0099919 E7103/8
1/2 14 21.34 100 35 17.5 13.1 16 18 4 0099865 E7101/2
3/4 14 26.67 105 35 23.0 17.2 17 23 5 0099902 E7103/4
1“ 11.5 33.40 115 43 28.6 21.4 21 29 5 0099834 E7101
1.1/4 11.5 42.16 125 43 33.3 25.0 24 38 5 0099858 E7101.1/4
1.1/2 11.5 48.26 135 43 38.1 28.6 25 44 7 0099841 E7101.1/2
2“ 11.5 60.33 145 43 47.6 35.7 29 56 7 0099896 E7102
ƔPipe Tap Ɣ Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 323
www.precisiondormer.com
1541(NPT) - TN1541
Ŷ
Ɣ
NPT TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 1010518
1/8 27 2.1/8 3/4 0.313 0.234 3/8 4 1010528
1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 1010519
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 1010520
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 1010521
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 1010522
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1010523
1“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1010524
1.1/4 11.5 4“ 1.3/4 1.313 0.984 15/16 5 1010525
1.1/2 11.5 4.1/4 1.3/4 1.500 1.125 1“ 7 1010526
2“ 11.5 4.1/2 1.3/4 1.875 1.406 1.1/8 7 1010527
TN1541
1541(NPT)
Ŷ
Ɣ
NPT TPI
l1
mm
l2
mm
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 1060519
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 1060520
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 1060521
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 1060522
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1060523
ƔPipe Tap, Straight Flute, Medium Hook
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
Ɣ Straight fl ute, medium hook
Ɣ Tarauds machine ƔMachos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
324 www.precisiondormer.com
1543(NPTF) - TN1543
Ŷ
NPTF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 1010529
1/8 27 2.1/8 3/4 0.313 0.234 3/8 4 1010539
1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 1010530
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 1010531
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 1010532
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 1010533
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1010534
1“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1010535
1.1/4 11.5 4“ 1.3/4 1.313 0.984 15/16 5 1010536
1.1/2 11.5 4.1/4 1.3/4 1.500 1.125 1“ 7 1010537
Ɣ
TN1543
1543(NPTF)
Ŷ
Ɣ
NPTF TPI
l1
mm
l2
mm
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 1060530
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 1060531
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 1060532
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 1060533
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1060534
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
Ɣ Straight fl ute, medium hook
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
Ɣ Straight fl ute, medium hook
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 325
www.precisiondormer.com
1544(NPT) - 1545(NPT)
Ŷ
Ɣ
NPT TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 1011760
1/8 27 2.1/8 3/4 0.313 0.234 3/8 4 1011770
1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 1011761
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 1011762
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 1011763
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 1011764
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1011765
1“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1011766
1.1/4 11.5 4“ 1.3/4 1.313 0.984 15/16 5 1011767
1.1/2 11.5 4.1/4 1.3/4 1.500 1.125 1“ 7 1011768
2“ 11.5 4.1/2 1.3/4 1.875 1.406 1.1/8 7 1011769
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
Ɣ Straight fl ute, For cast iron and heat-treated
alloy steels
1545(NPT)
Ŷ
Ɣ
NPT TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 1012869
1/8 27 2.1/8 3/4 0.313 0.234 3/8 4 1012879
1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 1012870
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 1012871
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 1012872
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 1012873
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1012874
1“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1012875
1.1/4 11.5 4“ 1.3/4 1.313 0.984 15/16 5 1012876
1.1/2 11.5 4.1/4 1.3/4 1.500 1.125 1“ 7 1012877
2“ 11.5 4.1/2 1.3/4 1.875 1.406 1.1/8 7 1012878
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
Ɣ High hook
1544(NPT)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
326 www.precisiondormer.com
1546(NPTF)
Ŷ
Ɣ
NPTF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 1012880
1/8 27 2.1/8 3/4 0.313 0.234 3/8 4 1012889
1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 1012881
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 1012882
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 1012883
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 1012884
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1012885
1“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1012886
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
Ɣ High hook
1545A(NPT) - 1546(NPTF)
Ŷ
Ɣ
NPT TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 1052869
1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 1052870
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 1052871
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 1052872
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 1052873
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1052874
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
Ɣ High hook
1545A(NPT)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 327
www.precisiondormer.com
1568(NPT)
Ŷ
Ɣ
NPT TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/8 27 2.1/8 3/4 0.313 0.234 3/8 5 1010560
1/8 27 2.1/8 3/4 0.438 0.328 3/8 5 1010551
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 5 1010552
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 5 1010553
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 5 1010554
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1010555
1“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1010556
1.1/4 11.5 4“ 1.3/4 1.313 0.984 15/16 5 1010557
1.1/2 11.5 4.1/4 1.3/4 1.500 1.125 1“ 7 1010558
2“ 11.5 4.1/2 1.3/4 1.875 1.406 1.1/8 7 1010559
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
Ɣ Interrupted thread
1567(NPTF) - 1568(NPT)
Ŷ
Ɣ
NPTF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/8 27 2.1/8 3/4 0.313 0.234 3/8 5 1010570
1/8 27 2.1/8 3/4 0.438 0.328 3/8 5 1010561
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 5 1010562
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 5 1010563
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 5 1010564
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1010565
1“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1010566
1.1/4 11.5 4“ 1.3/4 1.313 0.984 15/16 5 1010567
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
Ɣ Interrupted thread
1567(NPTF)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
328 www.precisiondormer.com
1549(NPTF)
Ŷ
Ɣ
NPTF TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 1010921
1/8 27 2.1/8 3/4 0.313 0.234 3/8 4 1010925
1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 1010923
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 1010927
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 1010929
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 1010931
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1010933
1“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1010935
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
Ɣ Medium hook
1548(NPT) - 1549(NPTF)
Ŷ
Ɣ
NPT TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/16 27 2.1/8 11/16 0.313 0.234 3/8 4 1010920
1/8 27 2.1/8 3/4 0.313 0.234 3/8 4 1010924
1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 1010922
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 1010926
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 1010928
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 1010930
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1010932
1“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1010934
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
Ɣ Medium hook
1548(NPT)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 329
www.precisiondormer.com
1542(NPS) - 1592(NPSF)
Ŷ
Ɣ
NPS TPI
l1
Inch
l2
Inch
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/8 27 2.1/8 3/4 0.313 0.234 3/8 4 1010587
1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 1010581
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 1010582
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 1010583
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 1010584
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1010585
1“ 11.5 3.3/4 1.3/4 1.125 0.843 13/16 5 1010586
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
1592(NPSF)
Ŷ
Ɣ
NPSF TPI
l1
mm
l2
mm
d2
Ø
Inch / a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
1/8 27 2.1/8 3/4 0.313 0.234 3/8 4 1010592
1/8 27 2.1/8 3/4 0.438 0.328 3/8 4 1010588
1/4 18 2.7/16 1.1/16 0.563 0.421 7/16 4 1010589
3/8 18 2.9/16 1.1/16 0.700 0.531 1/2 4 1010590
1/2 14 3.1/8 1.3/8 0.688 0.515 5/8 4 1010591
3/4 14 3.1/4 1.3/8 0.906 0.679 11/16 5 1011070
1542(NPS)
Ɣ Tarauds machineƔPipe Tap ƔMachos de máquina
ƔDryseal
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
330 www.precisiondormer.com
E040 - E041
E040
Ŷ
Ɣ
G(BSP) TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes Stock #
EDP #
or
e-Code
1/8 28 9.728 90 15 8 6.3 9 3 8.80 0569764 E0401/8
1/4 19 13.157 100 19 10 8 11 3 11.80 0569771 E0401/4
3/8 19 16.662 100 21 12.5 10 13 3 15.25 0569788 E0403/8
1/2 14 20.955 125 26 16 12.5 16 4 19.00 0569795 E0401/2
3/4 14 26.441 140 28 20 16 20 4 24.50 0569801 E0403/4
E041
Ŷ
Ɣ
G(BSP) TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes Stock #
EDP #
or
e-Code
1/8 28 9.728 90 15 8 6.3 9 3 8.80 0569818 E0411/8
1/4 19 13.157 100 19 10 8 11 3 11.80 0569825 E0411/4
3/8 19 16.662 100 21 12.5 10 13 3 15.25 0569832 E0413/8
1/2 14 20.955 125 26 16 12.5 16 4 19.00 0569849 E0411/2
3/4 14 26.441 140 28 20 16 20 4 24.50 0569856 E0413/4
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 331
www.precisiondormer.com
E042 - E043
E042
Ŷ
Ɣ
G(BSP) TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes Stock #
EDP #
or
e-Code
1/8 28 9.728 90 15 8 6.3 9 3 8.80 0569863 E0421/8
1/4 19 13.157 100 19 10 8 11 3 11.80 0569870 E0421/4
3/8 19 16.662 100 21 12.5 10 13 4 15.25 0569887 E0423/8
1/2 14 20.955 125 26 16 12.5 16 4 19.00 0569894 E0421/2
3/4 14 26.441 140 28 20 16 20 4 24.50 0569900 E0423/4
E043
Ŷ
Ɣ
G(BSP) TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes Stock #
EDP #
or
e-Code
1/8 28 9.728 90 15 8 6.3 9 3 8.80 0569917 E0431/8
1/4 19 13.157 100 19 10 8 11 3 11.80 0569924 E0431/4
3/8 19 16.662 100 21 12.5 10 13 4 15.25 0569931 E0433/8
1/2 14 20.955 125 26 16 12.5 16 4 19.00 0569948 E0431/2
3/4 14 26.441 140 28 20 16 20 4 24.50 0569955 E0433/4
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
Ɣ MTT-X Tarauds machineƔMachine Tap MTT-X ƔMTT-X Machos de máquina
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
332 www.precisiondormer.com
E547
Ɣ
G(BSP) TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes Stock #
EDP #
or
e-Code
1/8 28 9.728 59 15 8.0 8.0 9 4 8.8 0157169 E5471/8NO1
1/8 28 9.728 59 15 8.0 6.3 9 4 8.8 0157176 E5471/8NO2
1/8 28 9.728 59 15 8.0 6.3 9 4 8.8 0099285 E5471/8NO3
1/8 28 9.728 59 15 8.0 6.3 9 4 8.8 0157183 E5471/8NO7
1/4 19 13.157 67 19 10.0 8.0 11 4 11.8 0157190 E5471/4NO1
1/4 19 13.157 67 19 10.0 8.0 11 4 11.8 0157206 E5471/4NO2
1/4 19 13.157 67 19 10.0 8.0 11 4 11.8 0099278 E5471/4NO3
1/4 19 13.157 67 19 10.0 8.0 11 4 11.8 0157213 E5471/4NO7
3/8 19 16.662 75 21 12.5 10.0 13 4 15.25 0157220 E5473/8NO1
3/8 19 16.662 75 21 12.5 10.0 13 4 15.25 0157237 E5473/8NO2
3/8 19 16.662 75 21 12.5 10.0 13 4 15.25 0099315 E5473/8NO3
3/8 19 16.662 75 21 12.5 10.0 13 4 15.25 0157244 E5473/8NO7
1/2 14 20.955 87 26 16.0 12.5 16 4 19 0157251 E5471/2NO1
1/2 14 20.955 87 26 16.0 12.5 16 4 19 0157268 E5471/2NO2
1/2 14 20.955 87 26 16.0 12.5 16 4 19 0099261 E5471/2NO3
1/2 14 20.955 87 26 16.0 12.5 16 4 19 0157275 E5471/2NO7
5/8 14 22.911 91 26 18.0 14.0 18 4 21 0157282 E5475/8NO1
5/8 14 22.911 91 26 18.0 14.0 18 4 21 0099322 E5475/8NO2
5/8 14 22.911 91 26 18.0 14.0 18 4 21 0099339 E5475/8NO3
5/8 14 22.911 91 26 18.0 14.0 18 4 21 0340684 E5475/8NO7
3/4 14 26.441 96 28 20.0 16.0 20 4 24.5 0157299 E5473/4NO1
3/4 14 26.441 96 28 20.0 16.0 20 4 24.5 0150757 E5473/4NO2
3/4 14 26.441 96 28 20.0 16.0 20 4 24.5 0099308 E5473/4NO3
3/4 14 26.441 96 28 20.0 16.0 20 4 24.5 0160763 E5473/4NO7
7/8 14 30.201 102 29 22.4 18.0 22 4 28.25 0157305 E5477/8NO1
7/8 14 30.201 102 29 22.4 18.0 22 4 28.25 0099353 E5477/8NO2
7/8 14 30.201 102 29 22.4 18.0 22 4 28.25 0099360 E5477/8NO3
1“ 11 33.249 109 33 25.0 20.0 24 4 30.75 0157312 E5471NO1
1“ 11 33.249 109 33 25.0 20.0 24 4 30.75 0157329 E5471NO2
1“ 11 33.249 109 33 25.0 20.0 24 4 30.75 0099254 E5471NO3
1.1/4 11 41.910 119 36 31.5 25.0 28 6 39.5 0157336 E5471.1/4NO1
1.1/4 11 41.910 119 36 31.5 25.0 28 6 39.5 0099216 E5471.1/4NO2
1.1/4 11 41.910 119 36 31.5 25.0 28 6 39.5 0099223 E5471.1/4NO3
1.1/2 11 47.803 125 37 35.5 28.0 31 6 45 0157343 E5471.1/2NO1
1.1/2 11 47.803 125 37 35.5 28.0 31 6 45 0099193 E5471.1/2NO2
1.1/2 11 47.803 125 37 35.5 28.0 31 6 45 0099209 E5471.1/2NO3
1.3/4 11 53.746 132 39 35.5 28.0 31 6 51 0157350 E5471.3/4NO1
1.3/4 11 53.746 132 39 35.5 28.0 31 6 51 0099230 E5471.3/4NO2
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ɣ BSPP
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 333
www.precisiondormer.com
E547 - E550
G(BSP) TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes Stock #
EDP #
or
e-Code
1.3/4 11 53.746 132 39 35.5 28.0 31 6 51 0099247 E5471.3/4NO3
2“ 11 59.614 140 41 40.0 31.5 34 6 57 0157367 E5472NO1
2“ 11 59.614 140 41 40.0 31.5 34 6 57 0157374 E5472NO2
2“ 11 59.614 140 41 40.0 31.5 34 6 57 0099292 E5472NO3
2.1/4 11 65.710 142 42 40.0 31.5 34 6 63 0157404 E5472.1/4NO1
2.1/4 11 65.710 142 42 40.0 31.5 34 6 63 0157411 E5472.1/4NO2
2.1/4 11 65.710 142 42 40.0 31.5 34 6 63 0123775 E5472.1/4NO3
2.1/2 11 75.184 153 45 45.0 35.5 38 6 72.5 0157381 E5472.1/2NO1
2.1/2 11 75.184 153 45 45.0 35.5 38 6 72.5 0157398 E5472.1/2NO2
2.1/2 11 75.184 153 45 45.0 35.5 38 6 72.5 0123768 E5472.1/2NO3
3“ 11 87.884 164 48 50.0 40.0 42 8 85.5 0157428 E5473NO1
3“ 11 87.884 164 48 50.0 40.0 42 8 85.5 0157435 E5473NO2
3“ 11 87.884 164 48 50.0 40.0 42 8 85.5 0123782 E5473NO3
E550
Ŷ
Ɣ
Rc TPI
d1
nom
mm
l1
mm
l2
mm
d2
Ø
mm a
mm
l3
mm #
Flutes Stock #
EDP #
or
e-Code
1/8 28 9.728 59 15 8.0 6.3 9 3 8.4 0099490 E5501/8
1/8 28 9.728 59 15 8.0 6.3 9 3 8.4 0159408 E5501/8NO7
1/4 19 13.157 67 19 10.0 8.0 11 3 11.2 0099483 E5501/4
1/4 19 13.157 67 19 10.0 8.0 11 3 11.2 0159422 E5501/4NO7
3/8 19 16.662 75 21 12.5 10.0 13 3 14.75 0099520 E5503/8
3/8 19 16.662 75 21 12.5 10.0 13 3 14.75 0159446 E5503/8NO7
1/2 14 20.955 87 26 16.0 12.5 16 5 18.25 0099476 E5501/2
1/2 14 20.955 87 26 16.0 12.5 16 5 18.25 0159460 E5501/2NO7
3/4 14 26.441 96 28 20.0 16.0 20 5 23.75 0099513 E5503/4
3/4 14 26.441 96 28 20.0 16.0 20 5 23.75 0159484 E5503/4NO7
111 33.249 109 33 25.0 20.0 24 5 30 0099445 E5501
1.1/4 11 41.910 119 36 31.5 25.0 28 5 38.5 0099469 E5501.1/4
1.1/2 11 47.803 125 37 35.5 28.0 31 7 44.5 0099452 E5501.1/2
2“ 11 59.614 140 41 40.0 31.5 34 7 56 0099506 E5502
E547
Ɣ Tarauds machineƔMachine Tap ƔMachos de máquina
Ɣ BSPT
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
334 www.precisiondormer.com
1994(UNC) (UNF)
Ɣ
UNC TPI
l1
Inch
l2
Inch
d2
Ø
Inch a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
440 1.7/8 3/8 0.141 0.110 3/16 2 1110010
540 1.15/16 13/32 0.141 0.110 3/16 2 1110020
632 2“ 7/16 0.141 0.110 3/16 2 1110030
832 2.1/8 1/2 0.168 0.131 1/4 2 1110040
10 24 2.3/8 5/8 0.194 0.152 1/4 2 1110050
12 24 2.3/8 21/32 0.220 0.165 9/32 2 1110060
1/4 20 2.1/2 25/32 0.255 0.191 5/16 2 1110080
5/16 18 2.27/32 15/16 0.318 0.238 3/8 2 1110090
3/8 16 3.3/8 1.1/16 0.381 0.286 7/16 2 1110100
7/16 14 3.3/4 1.1/4 0.323 0.242 13/32 2 1110110
1/2 13 4.1/16 1.3/8 0.367 0.275 7/16 2 1110120
Ɣ Foret taraudeurƔ Combination Drill and Tap ƔCombinación broca-macho
Ɣ
UNF TPI
l1
Inch
l2
Inch
d2
Ø
Inch a
Inch
l3
Inch #
Flutes
EDP #
or
e-Code
448 1.7/8 3/8 0.141 0.110 3/16 2 1110012
544 1.15/16 13/32 0.141 0.110 3/16 2 1110024
640 2“ 7/16 0.141 0.110 3/16 2 1110034
836 2.1/8 1/2 0.168 0.131 1/4 2 1110044
10 32 2.3/8 5/8 0.194 0.152 1/4 2 1110054
12 28 2.3/8 21/32 0.220 0.165 9/32 2 1110064
1/4 28 2.1/2 25/32 0.255 0.191 5/16 2 1110084
5/16 24 2.27/32 15/16 0.318 0.238 3/8 2 1110094
3/8 24 3.3/8 1.1/16 0.381 0.286 7/16 2 1110104
7/16 20 3.3/4 1.1/4 0.323 0.242 13/32 2 1110114
1/2 20 4.1/16 1.3/8 0.367 0.275 7/16 2 1110124
1994(UNF)
1994(UNC)
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 335
www.precisiondormer.com
E650 - E651
Ɣ Foret taraudeurƔ Combination Drill and Tap ƔCombinación broca-macho
E650
Ɣ
MP
mm
d1
Ø
mm
l1
mm
l2
mm
l4
mm
d2
Ø
mm a
mm
l3
mm #
Flutes Stock #
EDP #
or
e-Code
30.50 2.5 56 10 6 3.15 2.5 5.0 2 0167861 E650M3
40.70 3.3 65 12 8 4.0 3.15 6.0 2 0127551 E650M4
50.80 4.2 69 15 10 5.0 4.00 7.0 2 0127568 E650M5
61.00 5.0 84 18 12 6.3 5.00 8.0 2 0127575 E650M6
81.25 6.8 96 21 16 8.0 6.30 9.0 2 0127582 E650M8
10 1.50 8.5 108 22 20 10.0 8.00 11.0 2 0127513 E650M10
12 1.75 10.2 113 29 24 9.0 7.10 10.0 2 0127520 E650M12
14 2.00 12.0 123 30 28 11.2 9.00 12.0 2 0127537 E650M14
16 2.00 14.0 134 32 32 12.5 10.00 13.0 2 0127544 E650M16
E651
Ɣ
UNC TPI
d1
nom
mm
d2
Ø
mm
l1
mm
l4l2
mm a
mm
Dormer
Stock
No.
EDP #
or
e-Code
632 2.80 3.5 56.9 6 12 2.90 5.00 0388907 E6516-32
832 3.50 4.50 64 8 12 3.55 6.00 0273272 E6518-32
10 24 3.90 5.00 72 10 15 4.00 7.00 0273197 E65110-24
12 24 4.50 5.60 77 11 15 4.50 7.00 0273210 E65112-24
1/4 20 5.20 6.30 83 13 17 5.00 8.00 0273227 E6511/4
5/16 18 6.60 8.00 94 16 21 6.30 9.00 0273241 E6515/16
3/8 16 8.00 10.00 104 19 23 8.00 11.00 0273234 E6513/8
7/16 14 9.40 8.00 107 22 25 6.30 9.00 0273265 E6517/16
1/2 13 10.80 9.00 114 25 29 7.10 10.00 0273203 E6511/2
9/16 12 12.20 11.20 124 28 29 9.00 12.00 0273289 E6519/16
5/8 11 13.50 12.50 134 32.5 31 10.00 13.00 0273258 E6515/8
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
336 www.precisiondormer.com
E653
Ɣ Foret taraudeurƔ Combination Drill and Tap ƔCombinación broca-macho
Ɣ
d1
Ø
Inch TPI
l1
Inch
l2
Inch
d2
Ø
Inch a
Inch zStock
Code
Dormer
Stock
No.
EDP #
or
e-Code
1/16 27 2.13/16 11/16 0.3120 0.2340 4 52788 0297254 E6531/16
1/8 27 2.7/8 3/4 0.4370 0.3280 4 52791 0297285 E6531/8
1/4 18 3.5/16 1.1/16 0.5620 0.4210 4 52794 0297278 E6531/4
3/8 18 3.1/2 1.1/16 0.7000 0.5310 4 52797 0297308 E6533/8
1/2 14 4.3/8 1.3/8 0.6870 0.5150 4 52800 0297261 E6531/2
3/4 14 4.9/16 1.3/8 0.9060 0.6790 5 52803 0297292 E6533/4
1“ 11.5 5.3/8 1.3/4 1.1250 0.8430 5 52806 0297247 E6531
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 337
www.precisiondormer.com
Ɣ Tourne à gauche
229C - 1215
Nr. A B UNC
EDP #
or
e-Code
229C 1500,1528 taps; R10P and R18P drills 9 6-32,8-32,10-24,10-32,1/4-20,5/16-18,3/8-16,7/16-14,1/2-13 4111502
ƔDrill-Tap Set, Metal Index ƔJuego de Brocas/ Machos, serie corta
Ɣ A=Type of Product in Set, B= No of Pieces, C= Diameters in set
1215
Nr.
Hand
Reamer
Capacity (inch)
Hand
Reamer
Capacity (mm)
Fractional
Tap
Capacity (inch)
Fractional
Tap
Capacity (mm)
EDP #
or
e-Code
T0 1/8 - 3/16 M3 - M5 1/16 - 5/32 M1 - M4 1810372
T1 3/16 - 5/16 M4 - M7 3/16 - 7/16 M4 - M10 1810373
T2 1/4 - 15/32 M6 - M14 1/4 - 9/16 M6 - M14 1810374
Ɣ Tap Wrench
ƔDesigned for hand tapping in tight places
and can also be used with any tool that
can be turned by hand
Ɣ T-Handle furnished with a sliding handle.
They are strong and rugged yet light
enough to ensure easy and accurate
handling
ƔPortamachos regulable
229C
338 www.precisiondormer.com
Ɣ Tourne à gauche
1301/8007 - 3850
Die
Stock
#
Overall
Length Takes
Die O.D. EDP #
or
e-Code
D2 6.3/8 13/16 1810042
D3 9 1 1810043
D6 14 1.1/2 1810096
D14 40.3/4 3 1810034
200 (Style = 8007) 14.3/4 2 1810053
3850
Nr.
Hand
Reamer
Capacity (inch)
Hand
Reamer
Capacity (mm)
Fractional
Tap
Capacity (inch)
Fractional
Tap
Capacity (mm)
EDP #
or
e-Code
81/8 - 5/16 M3 - M8 1/16-5/16 M1 - M8 1810017
93/16 - 3/8 M5 - M9 3/16-1/2 M4 - M12 1810018
10 1/4 - 9/16 M6 - M14 1/4-3/4 M3 - M8 1810019
11 3/8 - 3/4 M9 - M19 3/8-1“ M10 - M25 1810020
12 3/8 - 7/8 M9 - M22 3/8-1.1/8 M10 - M27 1810021
14 5/8 - 1.1/2 M16 - M39 7/8-1.7/8 M22 - M42 1810022
Ɣ Tap Wrench
ƔDesigned for hand tapping in
tight places and can also be used
with any tool that can be turned
by hand
ƔStraight handle design provides
greater leverage, particularly suited
for use with larger diameters
ƔPortamachos regulable
ƔDie Stocks
ƔDesigned for use with adjustable
round split dies
Ɣ The die is held securely by two
opposed screws in the stock
which locate in two indents in
the die
Ɣ Porte fi lières ƔManeta para Terrajas “ Portaterrajas”
1301 - 8007
339
www.precisiondormer.com
UNC TPI
d2
Ø
Inch h1
Inch
EDP #
or
e-Code
1/4 20 19/32 1/2 1410239
5/16 18 11/16 5/16 1410241
3/8 16 25/32 3/8 1410243
7/16 14 7/8 7/16 1410245
1/2 13 1.1/16 1/2 1410247
9/16 12 1.1/16 1/2 1410249
5/8 11 1.1/4 5/8 1410251
3/4 10 1.7/16 3/4 1410255
7/8 9 1.5/8 7/8 1410257
1“ 8 1.13/16 1 1410259
1.1/8 72“ 1 1410262
1.1/4 7 2.3/16 1 1410264
1.3/8 6 2.3/8 1 1410266
1.1/2 6 2.9/16 1 1410268
UNF TPI
d2
Ø
Inch h1
Inch
EDP #
or
e-Code
1/4 28 19/32 1/2 1410240
5/16 24 11/16 5/16 1410242
3/8 24 25/32 3/8 1410244
7/16 20 7/8 7/16 1410246
1/2 20 1.1/16 1/2 1410248
9/16 18 1.1/16 1/2 1410250
5/8 18 1.1/4 5/8 1410252
3/4 16 1.7/16 3/4 1410256
7/8 14 1.5/8 7/8 1410258
1“ 12 1.13/16 1“ 1410260
1.1/8 12 2“ 1“ 1410263
1.1/4 12 2.3/16 1“ 1410265
1.3/8 12 2.3/8 1“ 1410267
1.1/2 12 2.9/16 1“ 1410269
UNS TPI
d2
Ø
Inch h1
Inch
EDP #
or
e-Code
11/16 11 1.7/16 3/4 1410253
11/16 16 1.7/16 3/4 1410254
1“ 14 1.13/16 1“ 1410261
NPT TPI
d2
Ø
Inch h1
Inch
EDP #
or
e-Code
1/8 27 1.1/6 3/8 1410270
1/4 18 1.1/4 5/8 1410271
3/8 18 1.1/16 5/8 1410272
1/2 14 1.5/8 3/4 1410273
3/4 14 2“ 13/16 1410274
1“ 11.1/2 2.3/8 1“ 1410275
d2
d2
2025(UNC) (UNF) (UNS) (NPT)
ƔHexagon Rethreading Bolt Dies Ɣ Filières hexagonales BSPF Ɣ Terrajas, exterior hexagonal
340 www.precisiondormer.com
2025S - 2325M
Nr. A B UNC UNF
EDP #
or
e-Code
set 821 Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4 1410277
set 822 Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4,7/8,1“ 1410278
set 831 Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4 1410280
set 832 Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4,7/8,1-14(UNS) 1410281
set 824 Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2 1/4,5/16,3/8,7/16,1/2 1410282
set 825 Hexagon Dienut 1 each 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4 1/4,5/16,3/8,7/16,1/2,9/16,5/8,3/4 1410283
MP
mm
d2
Ø
Inch
h1
Inch EDP #
or
e-Code
6.0 1.00 19/32 1/4 1410609
7.0 1.00 11/16 5/16 1410610
8.0 1.25 11/16 5/16 1410611
9.0 1.25 25/32 3/8 1410612
10.0 1.50 7/8 7/16 1410613
11.0 1.50 7/8 7/16 1410614
MP
mm
d2
Ø
Inch
h1
Inch EDP #
or
e-Code
12.0 1.75 1.1/16 1/2 1410615
14.0 1.25 1.1/16 1/2 1410617
14.0 2.00 1.1/16 1/2 1410616
16.0 2.00 1.1/4 5/8 1410618
18.0 1.50 1.7/16 3/4 1410620
18.0 2.50 1.7/16 3/4 1410619
20.0 2.50 1.7/16 3/4 1410621
2325M
d2
2025S
Ɣ Filières hexagonales BSPFƔHexagon Rethreading Bolt Dies Ɣ Terrajas, exterior hexagonal
Ɣ Filières hexagonales BSPFƔHexagon Rethreading Bolt Dies Ɣ Terrajas, exterior hexagonal
341
www.precisiondormer.com
2010(UNC) (UNF)
UNC TPI
d2
Ø
Inch
EDP #
or
e-Code
164 13/16 1410004
256 13/16 1410008
348 13/16 1410012
440 13/16 1410016
540 13/16 1410022
632 13/16 1410026
632 1“ 1410027
832 13/16 1410032
832 1“ 1410033
10 24 13/16 1410038
10 24 1“ 1410039
12 24 13/16 1410044
12 24 1“ 1410045
1/4 20 13/16 1410063
1/4 20 1“ 1410064
1/4 20 1.1/2 1410066
1/4 20 2“ 1410067
5/16 18 13/16 1410079
5/16 18 1“ 1410080
5/16 18 1.1/2 1410082
5/16 18 2“ 1410083
3/8 16 1“ 1410093
3/8 16 1.1/2 1410095
3/8 16 2“ 1410096
7/16 14 1“ 1410101
7/16 14 1.1/2 1410103
7/16 14 2“ 1410104
1/2 13 1.1/2 1410110
1/2 13 2“ 1410111
9/16 12 1.1/2 1410117
9/16 12 2“ 1410118
5/8 11 1.1/2 1410123
5/8 11 2“ 1410124
3/4 10 2“ 1410131
7/8 92“ 1410135
1“ 83“ 1410140
1.1/8 73“ 1410145
1.1/4 73“ 1410147
1.3/8 63“ 1410149
1.1/2 63“ 1410151
UNF TPI
d2
Ø
Inch
EDP #
or
e-Code
080 13/16 1410002
172 13/16 1410006
264 13/16 1410010
356 13/16 1410014
448 13/16 1410018
544 13/16 1410024
640 13/16 1410029
836 13/16 1410035
10 32 13/16 1410041
10 32 1“ 1410042
12 28 13/16 1410047
1/4 28 13/16 1410068
1/4 28 1“ 1410069
1/4 28 1.1/2 1410071
1/4 28 2“ 1410072
1/4 32 1“ 1410077
5/16 24 1“ 1410085
5/16 24 1.1/2 1410087
5/16 24 2“ 1410088
5/16 32 1“ 1410090
3/8 24 1“ 1410097
3/8 24 1.1/2 1410099
3/8 24 2“ 1410100
7/16 20 1“ 1410105
7/16 20 1.1/2 1410107
7/16 20 2“ 1410108
1/2 20 1.1/2 1410114
1/2 20 2“ 1410115
9/16 18 1.1/2 1410120
9/16 18 2“ 1410121
5/8 18 1.1/2 1410126
5/8 18 2“ 1410127
3/4 16 2“ 1410133
7/8 14 2“ 1410137
1“ 12 3“ 1410142
1.1/8 12 3“ 1410146
1.1/4 12 3“ 1410148
1.3/8 12 3“ 1410150
1.1/2 12 3“ 1410152
Ɣ Round Adjustable Split Dies
Ɣ Used for threading bolts, studs, rods and
other applications requiring external threads
Ɣ Filières extensibles Ɣ Terraja tipo abierto
342 www.precisiondormer.com
2010(UNS) (NPT) - 2510(UNC)
UNS TPI
d2
Ø
Inch
EDP #
or
e-Code
436 13/16 1410020
1/4 24 1“ 1410074
1“ 14 3“ 1410144
NPT TPI
d2
Ø
Inch
EDP #
or
e-Code
1/8 27 1“ 1410203
1/8 27 1.1/2 1410204
1/4 18 1.1/2 1410205
1/4 18 2“ 1410206
3/8 18 1.1/2 1410207
3/8 18 2“ 1410208
1/2 14 2“ 1410209
UNC TPI
d2
Ø
Inch
EDP #
or
e-Code
540 13/16 1410153
632 13/16 1410155
632 1“ 1410156
832 13/16 1410159
832 1“ 1410160
10 24 13/16 1410163
10 24 1“ 1410164
12 24 13/16 1410167
12 24 1“ 1410168
1/4 20 13/16 1410171
1/4 20 1“ 1410172
1/4 20 1.1/2 1410173
5/16 18 13/16 1410177
UNC TPI
d2
Ø
Inch
EDP #
or
e-Code
5/16 18 1“ 1410178
5/16 18 1.1/2 1410179
3/8 16 1“ 1410183
3/8 16 1.1/2 1410184
7/16 14 1“ 1410187
7/16 14 1.1/2 1410188
1/2 13 1.1/2 1410191
9/16 12 1.1/2 1410193
5/8 11 1.1/2 1410195
5/8 11 2“ 1410196
3/4 10 2“ 1410199
7/8 92“1410201
2510(UNC)
2010(UNS) (NPT)
Ɣ Round Adjustable Split Dies
Ɣ Used for threading bolts, studs, rods and
other applications requiring external
threads
Ɣ Filières extensibles Ɣ Terraja tipo abierto
Ɣ Round Adjustable Split Dies
Ɣ Used for threading bolts, studs, rods and
other applications requiring external
threads
Ɣ Filières extensibles Ɣ Terraja tipo abierto
343
www.precisiondormer.com
2510(UNF) - 2710M
2710M
MP
mm
d2
Ø
Inch
EDP #
or
e-Code
2.0 0.40 13/16 1410573
2.3 0.40 13/16 1410574
2.5 0.45 13/16 1410575
2.6 0.45 13/16 1410576
3.0 0.50 13/16 1410577
3.5 0.60 13/16 1410578
4.0 0.70 13/16 1410579
4.5 0.75 13/16 1410580
5.0 0.80 13/16 1410581
6.0 1.00 1“ 1410582
7.0 1.00 1“ 1410583
8.0 1.25 1“ 1410584
MP
mm
d2
Ø
Inch
EDP #
or
e-Code
9.0 1.25 1“ 1410585
10.0 1.50 1“ 1410586
11.0 1.50 1“ 1410587
12.0 1.75 1“ 1410630
12.0 1.75 1.1/2 1410588
14.0 2.00 1.1/2 1410589
16.0 2.00 1.1/2 1410590
18.0 2.50 2“ 1410591
20.0 2.50 2“ 1410592
2510(UNF)
UNF TPI
d2
Ø
Inch
EDP #
or
e-Code
544 13/16 1410154
640 13/16 1410157
836 13/16 1410161
10 32 13/16 1410165
10 32 1“ 1410166
12 28 13/16 1410169
1/4 28 13/16 1410174
1/4 28 1“ 1410175
1/4 28 1.1/2 1410176
5/16 24 13/16 1410180
5/16 24 1“ 1410181
UNF TPI
d2
Ø
Inch
EDP #
or
e-Code
5/16 24 1.1/2 1410182
3/8 24 1“ 1410185
3/8 24 1.1/2 1410186
7/16 20 1“ 1410189
7/16 20 1.1/2 1410190
1/2 20 1.1/2 1410192
9/16 18 1.1/2 1410194
5/8 18 1.1/2 1410197
5/8 18 2“ 1410198
3/4 16 2“ 1410200
7/8 14 2“ 1410202
Ɣ Round Adjustable Split Dies
Ɣ Used for threading bolts, studs, rods and
other applications requiring external
threads
Ɣ Filières extensibles Ɣ Terraja tipo abierto
Ɣ Round Adjustable Split Dies
Ɣ Used for threading bolts, studs, rods and
other applications requiring external
threads
Ɣ Filières extensibles Ɣ Terraja tipo abierto
344 www.precisiondormer.com
Style Description Die
Stock #
Die
Stock
Length Tap
Wrench #
Outside
Diameter
Dies
EDP #
or
e-Code
3150 Master Series:UNC TAP SIZES: 1/4-20, 5/16-18, 3/8-16,
7/16-14,1/2-13, 9/16-12, 5/8-11 (16 piece set)
UNF TAP SIZES: 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20,
9/16-18, 5/8-18
(16 piece set)
D-6
D-6
14“
14“
8-10
10
1.1/2“
1.1/2
1610078
1610079
General Purpose:UNC TAP SIZES: 1/4-20, 5/16-18,
3/8-16, 1/2-13, 9/16-12, 5/8-11, 2-56, 3-48, 6-32,
8-32,10-24,12-24
UNF TAP SIZES: 1/4-28, 5/16-24, 3/8-24, 1/2-20, 9/16-18,
5/8-18 UNS SIZE: 4-36 (42 piece set)
D-2 & D-6 7“-14“ 8-10 13/16“(UNC);
1.1/2(UNC)
1.1/2(UNF)
1610080
70H: UNC TAP SIZES: 4-36NS, 6-32, 8-32, 10-24, 12-24,
1/4 - 20, 5/16 - 18 (16 piece set) D-2 7“ 8 13/16“ 1610065
70K: UNC TAP SIZES: 2-56, 3-48, 4-36 NS,
5-40, 6-32, 8-32, 10-24, 12-24, 1/4-20,
5/16 -18 (22 piece set)
D-2 7“ 8 13/16“ 1610067
70M: UNF TAP SIZES: NC and NF 4-36 NS, 6-32, 8-32,
10-24, 10-32, 12-24, 1/4-20 (16 piece set) D-2 7“ 8 13/16“ 1610070
70P: UNF TAP SIZES: NC and NF 4-40, 4-48, 6-32,
6-40, 8-32, 8-36, 10-24, 10-32, 12-24, 12-28 (22 piece set) D-2 7“ 8 13/16“ 1610072
90A: UNC TAP SIZES: 1/4-20, 5/16-18, 3/8-16, 7/16-14,
1/2-13, 5/8-11 (15 piece set) D3, D-6 9“-14“ 10 1/4“ to 3/8“-1,
7/16“ to 5/8“-
1.1/2“
1610076
90B: UNF TAP SIZES :1/4-28, 5/16-24, 3/8-24, 7/16-20,
1/2-20, 5/8-18, 3/4-16, 7/8-14 (22 piece set) D-3, D-6
200 9“-14“-16“ 9 and 11 1/4“ to 3/8“-1“;
7/16“ to 5/8“-1
.1/2“;
3/4“ to 7/8“-2“
1610077
*1702M: M2.0 x 0.40, M2.5 x 0.45, M3.0 x 0.50,
M3.5 x 0.60, M4.0 x 0.70, M4.5 x 0.75, M5.0 x 0.80 AND 1.6
mm, 2.05 mm, 2.5 mm, 2.9 mm, 3.3 mm, 3.7 mm, 4.2 mm
(23 piece set)
D-2 7“ T-0 13/16“ 1610087
*1703M: M6 x 1.00, M7 x 1.00, M8 x 1.25, M10 x 1.50,
M12 x 1.75 AND 5.0 mm, 6.0 mm, 6.7 mm, 8.5 mm,
10.2 mm (17 piece set)
D-3 9“ T-2 1“ 1610088
3150
Ɣ One plug tap and one round die for each cutting size
*One plug tap, one round die and one tap drill for each cutting size
Ɣ Tap and Round Die Screw Plate Sets
Solid Carbide End Mill Table of Contents
Style Description #Flutes Finish Page No.
www.precisiondormer.com 345
High Helix
E3603 60°, High Helix 3-Flute Bright 354
E3603G 60°, High Helix 3-Flute TiN 354
E3603V 60°, High Helix 3-Flute TiALN 355
2-Flute
E1302 Stub Length 2-Flute Bright 355
E1302G Stub Length 2-Flute TiN 356
E1302V Stub Length 2-Flute TiALN 356
E2302 Stub Length 2-Flute Bright 357
E3302 Regular Length 2-Flute Bright 357
E3302G Regular Length 2-Flute TiN 358
E3302V Regular Length 2-Flute TiALN 359
E3302M Regular Length, Metric 2-Flute Bright 360
E3302MG Regular Length, Metric 2-Flute TiN 361
E3302MV Regular Length, Metric 2-Flute TiALN 362
EB3302 Ball Nose, Regular Length 3-Flute Bright 363
EB3302G Ball Nose, Regular Length 3-Flute TiN 364
EB3302V Ball Nose, Regular Length 3-Flute TiALN 365
EB3302M Ball Nose, Regular Length, Metric 2-Flute Bright 366
EB3302MG Ball Nose, Regular Length, Metric 2-Flute TiN 367
EB3302MV Ball Nose, Regular Length, Metric 2-Flute TiALN 368
E4302 Double End, Regular Length 2-Flute Bright 368
EB4302 Ball Nose, Double End, Regular Length 2-Flute Bright 369
E6302 Extra Length 2-Flute Bright 369
E6302G Extra Length 2-Flute TiN 370
E6302V Extra Length 2-Flute TiALN 370
EB6302 Ball Nose, Extra Length 2-Flute Bright 371
EB6302G Ball Nose, Extra Length 2-Flute TiN 371
EB6302V Ball Nose, Extra Length 2-Flute TiALN 372
E3303 Regular Length 3-Flute Bright 372
E3303G Regular Length 3-Flute TiN 373
E3303V Regular Length 3-Flute TiALN 373
E1304 Stub Length 4-Flute Bright 374
E1304G Stub Length 4-Flute TiN 374
E1304V Stub Length 4-Flute TiALN 375
E2304 Stub Length 4-Flute Bright 375
E3304 Regular Length 4-Flute Bright 376
E3304G Regular Length 4-Flute TiN 377
E3304V Regular Length 4-Flute TiALN 378
E3304M Regular Length, Metric 4-Flute Bright 379
E3304MG Regular Length, Metric 4-Flute TiN 380
E3304MV Regular Length, Metric 4-Flute TiALN 381
EB3304 Ball Nose, Regular Length 4-Flute Bright 382
EB3304G Ball Nose, Regular Length 4-Flute TiN 383
EB3304V Ball Nose, Regular Length 4-Flute TiALN 384
EB3304M Ball Nose, Regular Length, Metric 4-Flute Bright 385
EB3304MG Ball Nose, Regular Length, Metric 4-Flute TiN 386
EB3304MV Ball Nose, Regular Length, Metric 4-Flute TiALN 384
E4304 Double End, Regular Length 4-Flute Bright 386
EB4304 Ball Nose, Double End, Regular Length 4-Flute Bright 387
E6304 Extra Length 4-Flute Bright 387
E6304G Extra Length 4-Flute TiN 388
E6304V Extra Length 4-Flute TiALN 388
EB6304 Ball Nose, Extra Length 4-Flute Bright 389
EB6304G Ball Nose, Extra Length 4-Flute TiN 389
EB6304V Ball Nose, Extra Length 4-Flute TiALN 390
3-Flute
4-Flute
RTDA Router 3-Flute Bright 390
www.precisiondormer.com
How To Use This Chart to Find Cutting Feed Rate (IPR):
1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code).
2. Find the closest diameter for your cutting application on the chart.
3. Select the type of cut and # Flutes to fi nd your Ft Range.
# of
Flutes
Depth/
Width
of Cut 1/8 5/32 3/16 1/4 5/16 13/32 1/2 9/16 5/8 11/16 3/4
>4 Ľ 1,5
ļ 0,05
A 0.001 0.001 0.001 0.001 0.001 0.002 0.002 0.002
B 0.002 0.002 0.002 0.003 0.003 0.004 0.004 0.004
C 0.003 0.003 0.004 0.004 0.005 0.005 0.006 0.007
3-4 Ľ 1,5
ļ 0,1
A 0.001 0.001 0.002 0.002 0.002 0.002 0.003 0.003 0.004 0.004 0.005
B 0.001 0.002 0.002 0.003 0.003 0.004 0.004 0.005 0.005 0.006 0.007
C 0.001 0.002 0.002 0.003 0.004 0.005 0.006 0.006 0.007 0.008 0.009
3-4 Ľ 1
ļ 0,5
A 0.000 0.000 0.000 0.001 0.001 0.001 0.001 0.002 0.002 0.002 0.002
B 0.003 0.000 0.001 0.001 0.001 0.002 0.002 0.002 0.003 0.003 0.004
C 0.000 0.001 0.001 0.001 0.002 0.002 0.003 0.003 0.004 0.004 0.005
2-3 Ľ 0,5
ļ 1
A 0.000 0.001 0.001 0.001 0.001 0.001 0.002 0.002 0.002 0.002 0.003
B 0.001 0.001 0.001 0.001 0.001 0.002 0.002 0.003 0.003 0.004 0.004
C 0.001 0.001 0.001 0.002 0.002 0.003 0.003 0.004 0.004 0.005 0.005
3-4
Ľ 0,5
ļ 1
Ľ 1
ļ 0,5
B 0.001 0.002 0.003 0.003 0.003 0.004 0.004 0.004
2
&
4
Ľ
0,1 - 0,5mm
ļ
0,1 - 0,5mm
A
BC 0.001 0.001 0.001 0.001 0.002 0.002 0.002 0.003 0.003
0.001 0.001 0.001 0.002 0.002 0.002 0.003 0.003 0.004
4
Ľ
0,01 - 0,1
ļ
1
A
BC 0.002 0.002 0.002 0.003 0.003
0.002 0.002 0.003 0.003 0.004
Feed Per Tooth (Ft) Dia Inches
Alpha
Code
Easy Calculations: (inch)
RPM = SFM/D x 3.82
F = Ft x T x RPM
Terms:
RPM = Revolutions Per Minute
F= Feed Inches Per Minute
Ft = Feed Per Tooth
T = Number of Teeth
D = Cutting Diameter
SFM = Surface Feet per Minute
Type of
Cut
346
Feed Rate Chart - Solid Carbide End Mills
www.precisiondormer.com
# of
Flutes
Depth/
Width
of Cut >0,5 0.6 0.8 1 2 3 4568101214161820
>4 Ľ 1,5
ļ 0,05
A 0.015 0.020 0.025 0.030 0.035 0.040 0.050 0.060
B 0.045 0.050 0.060 0.075 0.080 0.090 0.100 0.110
C 0.065 0.075 0.090 0.110 0.120 0.130 0.150 0.170
3-4 Ľ 1,5
ļ 0,1
A 0.010 0.020 0.030 0.040 0.045 0.050 0.060 0.075 0.080 0.090 0.100 0.120
B 0.015 0.030 0.040 0.055 0.065 0.075 0.090 0.110 0.120 0.130 0.150 0.170
C 0.015 0.030 0.040 0.055 0.085 0.100 0.120 0.140 0.150 0.170 0.200 0.220
3-4 Ľ 1
ļ 0,5
A 0.001 0.003 0.005 0.008 0.010 0.013 0.020 0.027 0.035 0.040 0.050 0.055 0.060
B 0.002 0.004 0.008 0.012 0.015 0.020 0.030 0.040 0.050 0.060 0.070 0.080 0.090
C 0.003 0.005 0.010 0.015 0.020 0.025 0.040 0.050 0.065 0.080 0.090 0.105 0.120
2-3 Ľ 0,5
ļ 1
A 0.001 0.001 0.002 0.002 0.005 0.009 0.013 0.017 0.020 0.023 0.035 0.040 0.050 0.055 0.060 0.070
B 0.001 0.002 0.003 0.003 0.007 0.013 0.020 0.025 0.030 0.035 0.050 0.060 0.070 0.080 0.090 0.100
C 0.002 0.003 0.004 0.004 0.009 0.017 0.025 0.033 0.040 0.045 0.065 0.080 0.090 0.105 0.120 0.130
3-4
Ľ 0,5
ļ 1
Ľ 1
ļ 0,5
B 0.035 0.040 0.055 0.065 0.080 0.090 0.100 0.110
2
&
4
Ľ
0,1 - 0,5mm
ļ
0,1 - 0,5mm
A 0.010 0.017 0.023 0.028 0.032 0.040 0.050 0.055 0.070 0.080
BC 0.015 0.022 0.030 0.035 0.040 0.050 0.060 0.070 0.085 0.100
4
Ľ
0,01 - 0,1
ļ
1
A 0.040 0.050 0.055 0.065 0.080
BC 0.050 0.060 0.070 0.080 0.100
Feed Per Tooth (Ft) Dia MM
Alpha
Code
Type of
Cut
Easy Calculations: (MM)
RPM = (mm/min x 1000)
/ 3.14 x Diameter
F = mm/min = RPM x feed per
tooth x number of teeth
Terms:
RPM = Revolutions Per MM
F= Feed MM Per Minute
Ft = Feed Per Tooth
T = Number of Teeth
D = Cutting Diameter
SFM = Surface Feet per Minute
347
Feed Rate Chart - Solid Carbide End Mills
How To Use This Chart to Find Cutting Feed Rate (IPR):
1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code).
2. Find the closest diameter for your cutting application on the chart.
3. Select the type of cut and # Flutes to fi nd your Ft Range.
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Solid Carbide End Mills
Solid Carbide End Mills
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Type of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 289 B
289 = SFM
B = Alpha Code to find your Feed Rate
To calculate Feed Per Tooth, refer to chart on page 346-347.
Page # for easy reference
Style:
Flutes:
Finish/Coating:
Axial Direction:
Type of Cut:
Tool Length:
Shank:
Material:
Tolerance:
Helix Angle:
End Grind:
Straight
Shank
Helix Angle
Carbide
Slotting,
Ramping
Slotting,
Ramping,
Diving
Slotting Ball Nose Roughing Finishing
Icon Guide for Solid Carbide End Mills
348
1
1
2
2
3
3
4
4
2
2
1
1
3
3
Ŷ = Excellent for Application
Ɣ = Good for Application
www.precisiondormer.com
E3603 E3603G E3603V
354 354 355
Ŷ151B Ŷ161B Ŷ200B
Ŷ200A Ŷ249A Ŷ325A
Ŷ141A Ŷ161A Ŷ226A
Ŷ112A Ŷ131A Ŷ174A
Ŷ89A Ŷ105A Ŷ131A
Ŷ161B Ŷ184B Ŷ230B
Ŷ144B Ŷ180B Ŷ200B
Ŷ131B Ŷ151B Ŷ190B
Ŷ171B Ŷ184B Ŷ230B
Ŷ115A Ŷ131A Ŷ161A
Ŷ66A Ŷ75A Ŷ98A
3-Flute
High Helix
3-Flute
High Helix
3-Flute
High Helix
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Solid Carbide End Mills
349
Solid Carbide End Mills (con‘t)
www.precisiondormer.com
EB3302V EB3302M EB3302MG
365 366 367
Ŷ400B Ŷ289B Ŷ325B
Ŷ298B Ŷ223B Ŷ249B
Ŷ298B Ŷ223B Ŷ249B
Ŷ259B Ŷ180B Ŷ200B
Ŷ230B Ŷ161B Ŷ180B
Ŷ200B Ɣ148B Ɣ161B
Ŷ325A Ŷ200A Ŷ249A
Ŷ223A Ŷ141A Ŷ161A
Ŷ174A Ŷ108A Ŷ131A
Ŷ89A Ŷ98A
Ŷ551B Ŷ374B
Ɣ525B Ɣ318B
Ŷ525B Ŷ318B
Ɣ374B Ɣ249B
Ŷ230B
Ɣ200B
Ɣ190B
Ɣ230B Ɣ184B
Ɣ161A
Ɣ98A
Ŷ649C
Ŷ499C
Ŷ499C
Ɣ125B
Ɣ1499C
Ɣ1499C
Ɣ649C
Ɣ400B
2-Flute 2-Flute 2-Flute
E1302 E1302G E1302V E2302 E3302 E3302G E3302V E3302M E3302MG E3302MV EB3302 EB3302G
355 356 356 357 357 358 359 360 361 362 363 364
Ŷ289B Ŷ325B Ŷ400B Ŷ289B Ŷ289B Ŷ325B Ŷ400B Ŷ289B Ŷ325B Ŷ400B Ŷ289B Ŷ325B
Ŷ223B Ŷ249B Ŷ298B Ŷ223B Ŷ223B Ŷ249B Ŷ298B Ŷ223B Ŷ249B Ŷ298B Ŷ223B Ŷ249B
Ŷ223B Ŷ249B Ŷ298B Ŷ223B Ŷ223B Ŷ249B Ŷ298B Ŷ223B Ŷ249B Ŷ298B Ŷ223B Ŷ249B
Ŷ180B Ŷ200B Ŷ259B Ŷ180B Ŷ180B Ŷ200B Ŷ259B Ŷ180B Ŷ200B Ŷ259B Ŷ180B Ŷ200B
Ŷ161B Ŷ180B Ŷ230B Ŷ161B Ŷ161B Ŷ180B Ŷ230B Ŷ161B Ŷ180B Ŷ230B Ŷ161B Ŷ180B
Ɣ148B Ɣ161B Ŷ200B Ɣ148B Ɣ148B Ɣ161B Ŷ200B Ɣ148B Ɣ161B Ŷ200B Ɣ148B Ɣ161B
Ɣ200A Ŷ249A Ŷ325A Ŷ200A Ɣ200A Ŷ249A Ŷ325A Ɣ200A Ŷ249A Ŷ325A Ŷ200A Ŷ249A
Ɣ141A Ŷ161A Ŷ223A Ŷ141A Ɣ141A Ŷ161A Ŷ223A Ɣ141A Ŷ161A Ŷ223A Ŷ141A Ŷ161A
Ɣ108A Ŷ131A Ŷ174A Ŷ108A Ɣ108A Ŷ131A Ŷ174A Ɣ108A Ŷ131A Ŷ174A Ŷ108A Ŷ131A
Ŷ89A Ŷ98A
Ŷ374B Ŷ551B Ŷ374B Ŷ374B Ŷ551B Ŷ374B Ŷ551B Ŷ374B
Ɣ318B Ɣ525B Ɣ318B Ɣ318B Ɣ525B Ɣ318B Ɣ525B Ɣ318B
Ŷ318B Ŷ525B Ŷ318B Ŷ318B Ŷ525B Ŷ318B Ŷ525B Ŷ318B
Ɣ249B Ɣ374B Ɣ249B Ɣ249B Ɣ374B Ɣ249B Ɣ374B Ɣ249B
Ŷ230B Ŷ230B Ŷ230B
Ɣ200B Ɣ200B Ɣ200B
Ɣ190B Ɣ190B Ɣ190B
Ɣ184B Ɣ230B Ɣ184B Ɣ230B Ɣ184B Ɣ230B Ɣ184B
Ɣ161A Ɣ161A Ɣ161A
Ɣ98A Ɣ98A Ɣ98A
Ŷ649C Ŷ649C Ŷ649C Ŷ649C
Ŷ499C Ŷ499C Ŷ499C Ŷ499C
Ŷ499C Ŷ499C Ŷ499C Ŷ499C
Ɣ125B Ɣ125B Ɣ125B Ɣ125B Ɣ125B
Ɣ1499C Ɣ1499C
Ɣ1499C Ɣ1499C
Ɣ649C Ɣ649C Ɣ649C Ɣ649C
Ɣ400B Ɣ400B Ɣ400B Ɣ400B Ɣ400B
2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Solid Carbide End Mills
Solid Carbide End Mills
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Type of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 289 B
289 = SFM
B = Alpha Code to find your Feed Rate
To calculate Feed Per Tooth, refer to chart on page 346-347.
Page # for easy reference
Style:
Flutes:
Finish/Coating:
Axial Direction:
Type of Cut:
Tool Length:
Shank:
Material:
Tolerance:
Helix Angle:
End Grind:
Straight
Shank
Helix Angle
Carbide
Slotting,
Ramping
Slotting,
Ramping,
Diving
Slotting Ball Nose Roughing Finishing
Icon Guide for Solid Carbide End Mills
350
1
1
2
2
3
3
4
4
2
2
1
1
3
3
Ŷ = Excellent for Application
Ɣ = Good for Application
www.precisiondormer.com
EB3302MV E4302 EB4302
368 368 369
Ŷ400B Ŷ289B Ŷ289B
Ŷ298B Ŷ223B Ŷ223B
Ŷ298B Ŷ223B Ŷ223B
Ŷ259B Ŷ180B Ŷ180B
Ŷ230B Ŷ161B Ŷ161B
Ŷ200B Ɣ148B Ɣ148B
Ŷ325A Ŷ200A Ŷ200A
Ŷ223A Ŷ141A Ŷ141A
Ŷ174A Ŷ108A Ŷ108A
Ŷ89A
Ŷ551B Ŷ374B Ŷ374B
Ɣ525B Ɣ318B Ɣ318B
Ŷ525B Ŷ318B Ŷ318B
Ɣ374B Ɣ249B Ɣ249B
Ŷ230B
Ɣ200B
Ɣ190B
Ɣ230B
Ɣ161A
Ɣ98A
Ŷ649C Ŷ649C
Ŷ499C Ŷ499C
Ŷ499C Ŷ499C
Ɣ125B Ɣ125B
Ɣ1499C Ɣ1499C
Ɣ1499C Ɣ1499C
Ɣ649C Ɣ649C
Ɣ400B Ɣ400B
2-Flute 2-Flute 2-Flute
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Solid Carbide End Mills
351
Solid Carbide End Mills (con‘t)
www.precisiondormer.com
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
E6302 E6302G E6302V EB6302 EB6302G EB6302V E3303 E3303G E3303V E1304 E1304G
369 370 370 371 371 372 372 373 373 374 374
Ŷ249B Ŷ289B Ŷ361B Ŷ249B Ŷ289B Ŷ361B Ŷ289B Ŷ325B Ŷ400B Ŷ361B Ŷ400B
Ŷ200B Ŷ226B Ŷ269B Ŷ200B Ŷ226B Ŷ269B Ŷ223B Ŷ249B Ŷ298B Ŷ325B Ŷ374B
Ŷ200B Ŷ226B Ŷ269B Ŷ200B Ŷ226B Ŷ269B Ŷ223B Ŷ249B Ŷ298B Ŷ325B Ŷ374B
Ŷ161B Ŷ180B Ŷ239B Ŷ161B Ŷ180B Ŷ239B Ŷ180B Ŷ200B Ŷ259B Ŷ298B Ŷ341B
Ŷ144B Ŷ161B Ŷ200B Ŷ144B Ŷ161B Ŷ200B Ŷ161B Ŷ180B Ŷ230B Ŷ249B Ŷ298B
Ɣ131B Ɣ148B Ŷ180B Ɣ131B Ɣ148B Ŷ180B Ɣ148B Ɣ161B Ŷ200B Ɣ230B Ɣ239B
Ŷ180A Ɣ210A Ŷ298A Ŷ180A Ɣ210A Ŷ298A Ŷ200A Ŷ249A Ŷ325A Ŷ239A Ŷ276A
Ŷ108A Ɣ128A Ŷ180A Ŷ108A Ɣ128A Ŷ180A Ŷ141A Ŷ161A Ŷ223A Ŷ171A Ŷ200A
Ŷ98A Ɣ118A Ŷ171A Ŷ98A Ɣ118A Ŷ171A Ŷ108A Ŷ131A Ŷ174A Ŷ131A Ŷ151A
Ŷ82A Ŷ89A Ɣ98A Ɣ121A
Ŷ298B Ŷ499B Ŷ298B Ŷ499B Ŷ374B Ŷ551B Ŷ449B
Ɣ249B Ŷ400B Ɣ249B Ŷ400B Ɣ318B Ɣ525B Ɣ377B
Ŷ249B Ŷ400B Ŷ249B Ŷ400B Ŷ318B Ŷ525B Ŷ377B
Ɣ200B Ŷ341B Ɣ200B Ŷ341B Ɣ249B Ɣ374B Ɣ279B
Ŷ200B Ŷ200B Ŷ230B
Ɣ180B Ɣ180B Ɣ200B
Ɣ174B Ɣ174B Ɣ190B
Ɣ164B Ŷ200B Ɣ148B Ɣ164B Ŷ200B Ɣ184B Ɣ230B Ɣ210B
Ɣ141A Ɣ141A Ɣ161A
Ɣ85A Ɣ85A Ɣ98A
Ŷ584C Ŷ584C Ŷ584C Ŷ584C Ŷ649C Ŷ679C
Ŷ449C Ŷ449C Ŷ449C Ŷ449C Ŷ499C Ŷ574C
Ŷ449C Ŷ449C Ŷ449C Ŷ449C Ŷ499C Ŷ574C
Ɣ108B Ɣ108B Ɣ108B Ɣ108B Ɣ125B Ɣ144B
Ɣ1348C Ɣ1348C Ɣ1348C Ɣ1348C Ɣ1499C Ɣ1601C
Ɣ1348C Ɣ1348C Ɣ1348C Ɣ1348C Ɣ1499C Ɣ1601C
Ɣ584C Ɣ584C Ɣ584C Ɣ584C Ɣ649C Ɣ708C
Ɣ361B Ɣ361B Ɣ361B Ɣ361B Ɣ400B Ɣ479B
2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 3-Flute 3-Flute 3-Flute 4-Flute 4-Flute
E1304V E2304 E3304 E3304G
375 375 376 377
Ŷ499B Ŷ361B Ŷ361B Ŷ400B
Ŷ449B Ŷ325B Ŷ325B Ŷ374B
Ŷ449B Ŷ325B Ŷ325B Ŷ374B
Ŷ423B Ŷ298B Ŷ298B Ŷ341B
Ŷ400B Ŷ249B Ŷ249B Ŷ298B
Ŷ328B Ɣ230B Ɣ230B Ɣ239B
Ŷ351A Ŷ239A Ŷ239A Ŷ276A
Ŷ276A Ŷ171A Ŷ171A Ŷ200A
Ŷ200A Ŷ131A Ŷ131A Ŷ151A
Ŷ105A Ŷ105A
Ŷ699B Ŷ449B Ŷ449B
Ŷ649B Ɣ377B Ɣ377B
Ŷ649B Ŷ377B Ŷ377B
Ŷ430B Ɣ279B Ɣ279B
Ŷ259B
Ɣ230B
Ɣ200B
Ɣ266B Ɣ210B
Ɣ200A
Ɣ131A
Ŷ679C Ŷ679C
Ŷ574C Ŷ574C
Ŷ574C Ŷ574C
Ɣ144B Ɣ144B
Ɣ1601C Ɣ1601C
Ɣ1601C Ɣ1601C
Ɣ708C Ɣ708C
Ɣ479B Ɣ479B
4-Flute 4-Flute 4-Flute 4-Flute
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Solid Carbide End Mills
Solid Carbide End Mills
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Type of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 289 B
289 = SFM
B = Alpha Code to find your Feed Rate
To calculate Feed Per Tooth, refer to chart on page 346-347.
Page # for easy reference
Style:
Flutes:
Finish/Coating:
Axial Direction:
Type of Cut:
Tool Length:
Shank:
Material:
Tolerance:
Helix Angle:
End Grind:
Straight
Shank
Helix Angle
Carbide
Slotting,
Ramping
Slotting,
Ramping,
Diving
Slotting Ball Nose Roughing Finishing
Icon Guide for Solid Carbide End Mills
352
1
1
2
2
3
3
4
4
2
2
1
1
3
3
Ŷ = Excellent for Application
Ɣ = Good for Application
www.precisiondormer.com
E3304V E3304M E3304MG
378 379 380
Ŷ499B Ŷ361B Ŷ400B
Ŷ449B Ŷ325B Ŷ374B
Ŷ449B Ŷ325B Ŷ374B
Ŷ423B Ŷ298B Ŷ341B
Ŷ400B Ŷ249B Ŷ298B
Ŷ328B Ɣ230B Ɣ239B
Ŷ351A Ŷ239A Ŷ276A
Ŷ276A Ŷ171A Ŷ200A
Ŷ200A Ŷ131A Ŷ151A
Ŷ164A Ŷ105A Ŷ105A
Ŷ699B Ŷ449B
Ŷ649B Ɣ377B
Ŷ649B Ŷ377B
Ŷ430B Ɣ279B
Ŷ259B
Ɣ230B
Ɣ200B
Ɣ266B Ɣ210B
Ɣ200A
Ɣ131A
Ŷ679C
Ŷ574C
Ŷ574C
Ɣ144B
Ɣ1601C
Ɣ1601C
Ɣ708C
Ɣ479B
4-Flute 4-Flute 4-Flute
Surface Feet per Minute SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Solid Carbide End Mills
353
Solid Carbide End Mills (con‘t)
www.precisiondormer.com
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
E3304MV EB3304 EB3304G EB3304V,MV EB3304M EB3304MG E4304 EB4304 E6304 E6304G
381 382 383 384 385 386 386 387 387 388
Ŷ499B Ŷ361B Ŷ400B Ŷ499B Ŷ361B Ŷ400B Ŷ361B Ŷ361B Ŷ325B Ŷ361B
Ŷ449B Ŷ325B Ŷ374B Ŷ449B Ŷ325B Ŷ374B Ŷ325B Ŷ325B Ŷ298B Ŷ341B
Ŷ449B Ŷ325B Ŷ374B Ŷ449B Ŷ325B Ŷ374B Ŷ325B Ŷ325B Ŷ298B Ŷ341B
Ŷ423B Ŷ298B Ŷ341B Ŷ423B Ŷ298B Ŷ341B Ŷ298B Ŷ298B Ŷ276B Ŷ315B
Ŷ400B Ŷ249B Ŷ298B Ŷ400B Ŷ249B Ŷ298B Ŷ249B Ŷ249B Ŷ226B Ŷ269B
Ŷ328B Ɣ230B Ɣ239B Ŷ328B Ɣ230B Ɣ239B Ɣ230B Ɣ230B Ɣ180B Ɣ220B
Ŷ351A Ŷ239A Ŷ276A Ŷ351A Ŷ239A Ŷ276A Ŷ239A Ŷ239A Ŷ200A Ŷ239A
Ŷ276A Ŷ171A Ŷ200A Ŷ276A Ŷ171A Ŷ200A Ŷ171A Ŷ171A Ŷ141A Ŷ161A
Ŷ200A Ŷ131A Ŷ151A Ŷ200A Ŷ131A Ŷ151A Ŷ131A Ŷ131A Ŷ115A Ŷ131A
Ŷ164A Ŷ98A Ŷ115A Ŷ148A Ŷ98A Ŷ115A Ŷ105A Ŷ89A Ŷ89A Ŷ89A
Ŷ699B Ŷ449B Ŷ699B Ŷ449B Ŷ449B Ŷ449B Ŷ361B
Ŷ649B Ɣ377B Ŷ649B Ɣ377B Ɣ377B Ɣ377B Ɣ298B
Ŷ649B Ŷ377B Ŷ649B Ŷ377B Ŷ377B Ŷ377B Ŷ298B
Ŷ430B Ɣ279B Ŷ430B Ɣ279B Ɣ279B Ɣ279B Ɣ230B Ɣ200B
Ŷ259B Ŷ259B
Ɣ230B Ɣ230B
Ɣ200B Ɣ200B
Ɣ266B Ɣ210B Ɣ266B Ɣ210B Ɣ187B
Ɣ200A Ɣ200A
Ɣ131A Ɣ131A
Ŷ679C Ŷ679C Ŷ679C Ŷ679C Ŷ613C
Ŷ574C Ŷ574C Ŷ574C Ŷ574C Ŷ518C
Ŷ574C Ŷ574C Ŷ574C Ŷ574C Ŷ518C
Ɣ144B Ɣ144B Ɣ144B Ɣ144B Ɣ131B
Ɣ1601C Ɣ1601C Ɣ1601C Ɣ1601C Ɣ1450C
Ɣ1601C Ɣ1601C Ɣ1601C Ɣ1601C Ɣ1450C
Ɣ708C Ɣ708C Ɣ708C Ɣ708C Ɣ640C
Ɣ479B Ɣ479B Ɣ479B Ɣ479B Ɣ430B
4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 4-Flute
E6304V EB6304 EB6304G EB6304V RTDA
388 389 389 390 390
Ŷ449B Ŷ325B Ŷ361B Ŷ400B
Ŷ400B Ŷ298B Ŷ341B Ŷ374B
Ŷ400B Ŷ298B Ŷ341B Ŷ374B Ŷ279U
Ŷ390B Ŷ276B Ŷ315B Ŷ351B Ŷ230U
Ŷ361B Ŷ226B Ŷ269B Ŷ325B Ŷ230U
Ŷ298B Ɣ180B Ɣ220B Ɣ249B Ŷ164T
Ŷ148S
Ŷ131S
Ŷ325A Ŷ200A Ŷ239A Ŷ226A
Ŷ226A Ŷ141A Ŷ161A Ŷ190A
Ŷ164A Ŷ115A Ŷ131A Ŷ151A
Ŷ115A Ŷ105A Ŷ121A
Ŷ600B Ŷ361B Ŷ499B Ɣ246V
Ŷ508B Ɣ298B Ŷ430B Ɣ246V
Ŷ508B Ŷ298B Ŷ430B Ɣ180V
Ŷ400B Ɣ230B Ɣ338B Ɣ180V
Ɣ230B Ɣ200B Ɣ131T
Ɣ210B Ɣ190B Ɣ131T
Ɣ180B Ɣ82T
Ɣ236B Ɣ210B
Ɣ180A Ɣ72T
Ɣ115A Ɣ46S
Ŷ613C Ɣ699C
Ŷ518C Ɣ571C
Ŷ518C Ɣ571C
Ɣ131B Ɣ180B Ŷ230W
Ɣ1450C Ŷ1650C
Ɣ1450C Ŷ1650C Ɣ656X
Ɣ640C Ŷ708C Ŷ367X
Ɣ430B Ŷ410B Ŷ197X
Ŷ105U
4-Flute 4-Flute 4-Flute 4-Flute
Surface Feet per Minute (SFM)
4-Flute 3-Flute
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
354
E3603 - E3603G
E3603
Ŷ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 5/8 1.1/2 3 005802
3/16 0.1875 3/16 5/8 2“ 3 005804
1/4 0.2500 1/4 3/4 2.1/2 3 005807
5/16 0.3125 5/16 13/16 2.1/2 3 005808
3/8 0.3750 3/8 1“ 2.1/2 3 005810
7/16 0.4375 7/16 1“ 3“ 3 005812
1/2 0.5000 1/2 1“ 3“ 3 005814
5/8 0.6250 5/8 1.1/4 3.1/2 3 005815
3/4 0.7500 3/4 1.1/2 4“ 3 005817
1“ 1.0000 1 1.1/2 4“ 3 005820
Ŷ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1/2 1.1/2 3 005902
3/16 0.1875 3/16 5/8 2“ 3 005904
1/4 0.2500 1/4 3/4 2.1/2 3 005907
5/16 0.3125 5/16 13/16 2.1/2 3 005908
3/8 0.3750 3/8 1“ 2.1/2 3 005910
7/16 0.4375 7/16 1“ 3“ 3 005912
1/2 0.5000 1/2 1“ 3“ 3 005914
5/8 0.6250 5/8 1.1/4 3.1/2 3 005915
3/4 0.7500 3/4 1.1/2 4“ 3 005917
1“ 1.0000 1 1.1/2 4“ 3 005920
E3603G
Ɣ Fraises de fi nitionƔEnd Mill ƔFresas de acabado
Ɣ3-fl ute, 60° high helix
Ɣ Fraises de fi nitionƔEnd Mill ƔFresas de acabado
Ɣ3-fl ute, 60° high helix
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 355
E3603V - E1302
E3603V
Ŷ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1/2 1.1/2 3 002780
3/16 0.1875 3/16 5/8 2“ 3 002781
1/4 0.2500 1/4 3/4 2.1/2 3 002782
5/16 0.3125 5/16 13/16 2.1/2 3 002783
3/8 0.3750 3/8 1“ 2.1/2 3 002784
7/16 0.4375 7/16 1“ 3“ 3 002785
1/2 0.5000 1/2 1“ 3“ 3 002786
5/8 0.6250 5/8 1.1/4 3.1/2 3 002787
3/4 0.7500 3/4 1.1/2 4“ 3 002788
1“ 1.0000 1 1.1/2 4“ 3 002789
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/8 1.1/2 2 001802
3/32 0.0938 1/8 3/16 1.1/2 2 001804
1/8 0.1250 1/8 1/4 1.1/2 2 001806
5/32 0.1562 3/16 5/16 2“ 2 001808
3/16 0.1875 3/16 3/8 2“ 2 001810
7/32 0.2188 1/4 7/16 2“ 2 001811
1/4 0.2500 1/4 1/2 2“ 2 001812
5/16 0.3125 5/16 1/2 2“ 2 001813
3/8 0.3750 3/8 5/8 2“ 2 001814
7/16 0.4375 7/16 5/8 2.1/2 2 001815
1/2 0.5000 1/2 5/8 2.1/2 2 001816
E1302
Ɣ3-fl ute, 60° high helix
Ɣ2-fl ute, stub length
ƔEnd MillƔ Fraises de fi nition ƔFresas de acabado
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
356
E1302G - E1302V
E1302G
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/8 1.1/2 2 006802
3/32 0.0938 1/8 3/16 1.1/2 2 006804
1/8 0.1250 1/8 1/4 1.1/2 2 006806
5/32 0.1562 3/16 5/16 2“ 2 006808
3/16 0.1875 3/16 3/8 2“ 2 006810
7/32 0.2188 1/4 7/16 2“ 2 006811
1/4 0.2500 1/4 1/2 2“ 2 006812
5/16 0.3125 5/16 1/2 2“ 2 006813
3/8 0.3750 3/8 5/8 2“ 2 006814
7/16 0.4375 7/16 5/8 2.1/2 2 006815
1/2 0.5000 1/2 5/8 2.1/2 2 006816
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/8 1.1/2 2 002735
3/32 0.0938 1/8 3/16 1.1/2 2 002736
1/8 0.1250 1/8 1/4 1.1/2 2 002737
5/32 0.1562 3/16 5/16 2“ 2 002738
3/16 0.1875 3/16 3/8 2“ 2 002739
7/32 0.2188 1/4 7/16 2“ 2 002740
1/4 0.2500 1/4 1/2 2“ 2 002741
5/16 0.3125 5/16 1/2 2“ 2 002742
3/8 0.3750 3/8 5/8 2“ 2 002743
7/16 0.4375 7/16 5/8 2.1/2 2 002744
1/2 0.5000 1/2 5/8 2.1/2 2 002745
E1302V
Ɣ2-fl ute, stub length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ2-fl ute, stub length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 357
E2302 - E3302
E2302
ŶƔ
d1
Ø Inch d1decimal
Inch d2
Ø Inch l2
Inch l1
Inch # Flutes EDP # or
e-Code
1/16 0.0625 1/8 1/8 1.1/2 2 002002
3/32 0.0938 1/8 3/16 1.1/2 2 002003
1/8 0.1250 1/8 1/4 1.1/2 2 002004
3/16 0.1875 3/16 3/8 2“ 2 002006
1/4 0.2500 1/4 1/2 2.1/2 2 002008
5/16 0.3125 5/16 1/2 2.1/2 2 002009
3/8 0.3750 3/8 1/2 2.1/2 2 002010
1/2 0.5000 1/2 5/8 3“ 2 002012
Ɣ2-fl ute, stub length
Ɣ Fraises de fi nition
Ɣ Fraises de fi nition - DoubleƔEnd Mill, double-end ƔFresas de acabado - Doble fi nal
E3302
ŶƔ
d1
Ø Inch d1decimal
Inch d2
Ø Inch l2
Inch l1
Inch # Flutes EDP # or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 2 001000
5/64 0.0781 1/8 1/4 1.1/2 2 001001
3/32 0.0938 1/8 3/8 1.1/2 2 001002
7/64 0.1094 1/8 3/8 1.1/2 2 001003
1/8 0.1250 1/8 1/2 1.1/2 2 001004
9/64 0.1406 3/16 9/16 2“ 2 001005
5/32 0.1562 3/16 9/16 2“ 2 001006
11/64 0.1719 3/16 9/16 2“ 2 001007
3/16 0.1875 3/16 5/8 2“ 2 001008
13/64 0.2031 1/4 5/8 2.1/2 2 001009
7/32 0.2188 1/4 5/8 2.1/2 2 001010
15/64 0.2344 1/4 3/4 2.1/2 2 001011
1/4 0.2500 1/4 3/4 2.1/2 2 001012
5/16 0.3125 5/16 7/8 2.1/2 2 001016
3/8 0.3750 3/8 7/8 2.1/2 2 001017
7/16 0.4375 7/16 1“ 2.1/2 2 001018
1/2 0.5000 1/2 1“ 3“ 2 001019
9/16 0.5625 9/16 1.1/4 3.1/2 2 001020
5/8 0.6250 5/8 1.1/4 3.1/2 2 001021
11/16 0.6875 3/4 1.1/2 4“ 2 001022
3/4 0.7500 3/4 1.1/2 4“ 2 001023
7/8 0.8750 7/8 1.1/2 4“ 2 001024
1“ 1.0000 1“ 1.1/2 4“ 2 001025
Ɣ2-fl ute, regular length
ƔEnd Mill ƔFresas de acabado
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
358
E3302G
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 2 005100
5/64 0.0781 1/8 1/4 1.1/2 2 005101
3/32 0.0938 1/8 3/8 1.1/2 2 005102
7/64 0.1094 1/8 3/8 1.1/2 2 005103
1/8 0.1250 1/8 1/2 1.1/2 2 005104
9/64 0.1406 3/16 9/16 2“ 2 005105
5/32 0.1562 3/16 9/16 2“ 2 005106
11/64 0.1719 3/16 9/16 2“ 2 005107
3/16 0.1875 3/16 5/8 2“ 2 005108
13/64 0.2031 1/4 5/8 2.1/2 2 005109
7/32 0.2188 1/4 5/8 2.1/2 2 005110
15/64 0.2344 1/4 3/4 2.1/2 2 005111
1/4 0.2500 1/4 3/4 2.1/2 2 005112
5/16 0.3125 5/16 7/8 2.1/2 2 005116
3/8 0.3750 3/8 7/8 2.1/2 2 005117
7/16 0.4375 7/16 1“ 2.1/2 2 005118
1/2 0.5000 1/2 1“ 3“ 2 005119
9/16 0.5625 9/16 1.1/4 3.1/2 2 005120
5/8 0.6250 5/8 1.1/4 3.1/2 2 005121
11/16 0.6875 3/4 1.1/2 4“ 2 005122
3/4 0.7500 3/4 1.1/2 4“ 2 005123
7/8 0.8750 7/8 1.1/2 4“ 2 005124
1“ 1.0000 1“ 1.1/2 4“ 2 005125
Ɣ2-fl ute, regular length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 359
E3302V
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 2 002850
5/64 0.0781 1/8 1/4 1.1/2 2 002851
3/32 0.0938 1/8 3/8 1.1/2 2 002852
7/64 0.1094 1/8 3/8 1.1/2 2 002853
1/8 0.1250 1/8 1/2 1.1/2 2 002854
9/64 0.1406 3/16 9/16 2“ 2 002855
5/32 0.1562 3/16 9/16 2“ 2 002856
11/64 0.1719 3/16 9/16 2“ 2 002857
3/16 0.1875 3/16 5/8 2“ 2 002858
13/64 0.2031 1/4 5/8 2.1/2 2 002859
7/32 0.2188 1/4 5/8 2.1/2 2 002860
15/64 0.2344 1/4 3/4 2.1/2 2 002861
1/4 0.2500 1/4 3/4 2.1/2 2 002862
5/16 0.3125 5/16 7/8 2.1/2 2 002863
3/8 0.3750 3/8 7/8 2.1/2 2 002864
7/16 0.4375 7/16 1“ 2.1/2 2 002865
1/2 0.5000 1/2 1“ 3“ 2 002866
9/16 0.5625 9/16 1.1/4 3.1/2 2 002867
5/8 0.6250 5/8 1.1/4 3.1/2 2 002868
11/16 0.6875 3/4 1.1/2 4“ 2 002869
3/4 0.7500 3/4 1.1/2 4“ 2 002870
7/8 0.8750 7/8 1.1/2 4“ 2 002871
1“ 1.0000 1“ 1.1/2 4“ 2 002872
Ɣ2-fl ute, regular length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
360
E3302M
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
2.00 0.0787 3.0 6.0 38.0 2 001028
2.50 0.0984 3.0 6.0 38.0 2 001029
3.00 0.1181 3.0 12.0 38.0 2 001030
3.50 0.1378 4.0 14.0 50.0 2 001031
4.00 0.1575 4.0 14.0 50.0 2 001032
4.50 0.1772 5.0 14.0 50.0 2 001033
5.00 0.1969 5.0 16.0 50.0 2 001034
6.00 0.2362 6.0 19.0 63.0 2 001035
7.00 0.2756 8.0 19.0 63.0 2 001036
8.00 0.3150 8.0 19.0 63.0 2 001037
9.00 0.3543 10.0 22.0 70.0 2 001038
10.00 0.3937 10.0 22.0 70.0 2 001039
11.00 0.4331 11.0 25.0 70.0 2 001040
12.00 0.4724 12.0 25.0 75.0 2 001041
14.00 0.5512 14.0 30.0 88.0 2 001043
16.00 0.6299 16.0 32.0 88.0 2 001044
18.00 0.7087 18.0 36.0 100.0 2 001045
20.00 0.7874 20.0 38.0 100.0 2 001046
25.00 0.9843 25.0 38.0 100.0 2 001047
Ɣ2-fl ute, regular length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 361
E3302MG
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
2.00 0.0787 3.0 6.0 38.0 2 005128
2.50 0.0984 3.0 6.0 38.0 2 005129
3.00 0.1181 3.0 12.0 38.0 2 005130
3.50 0.1378 4.0 14.0 50.0 2 005131
4.00 0.1575 4.0 14.0 50.0 2 005132
4.50 0.1772 5.0 14.0 50.0 2 005133
5.00 0.1969 5.0 16.0 50.0 2 005134
6.00 0.2362 6.0 19.0 63.0 2 005135
7.00 0.2756 8.0 19.0 63.0 2 005136
8.00 0.3150 8.0 19.0 63.0 2 005137
9.00 0.3543 10.0 22.0 70.0 2 005138
10.00 0.3937 10.0 22.0 70.0 2 005139
11.00 0.4331 11.0 25.0 70.0 2 005140
12.00 0.4724 12.0 25.0 75.0 2 005141
14.00 0.5512 14.0 30.0 88.0 2 005143
16.00 0.6299 16.0 32.0 88.0 2 005144
18.00 0.7087 18.0 36.0 100.0 2 005145
20.00 0.7874 20.0 38.0 100.0 2 005146
25.00 0.9843 25.0 38.0 100.0 2 005147
Ɣ2-fl ute, regular length
Ɣ Fraises de fi nition ƔFresas de acabado
ƔEnd Mill
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
362
E3302MV
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
2.00 0.0787 3.0 6.0 38.0 2 004275
2.50 0.0984 3.0 6.0 38.0 2 004276
3.00 0.1181 3.0 12.0 38.0 2 004277
3.50 0.1378 4.0 14.0 50.0 2 004278
4.00 0.1575 4.0 14.0 50.0 2 004279
4.50 0.1772 5.0 14.0 50.0 2 004280
5.00 0.1969 5.0 16.0 50.0 2 004281
6.00 0.2362 6.0 19.0 63.0 2 004282
7.00
8.00
9.00
0.2756
0.3150
0.3543
8.0
8.0
10.0
19.0
20.0
22.0
63.0
63.0
73.0
2
2
2
004283
004284
004285
10.00 0.3937 10.0 22.0 70.0 2 004286
11.00 0.4331 11.0 25.0 70.0 2 004287
12.00 0.4724 12.0 25.0 75.0 2 004288
14.00 0.5512 14.0 30.0 88.0 2 004289
16.00 0.6299 16.0 32.0 88.0 2 004290
18.00 0.7087 18.0 36.0 100.0 2 004291
20.00 0.7874 20.0 38.0 100.0 2 004292
25.00 0.9843 25.0 38.0 100.0 2 004293
Ɣ2-fl ute, regular length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 363
EB3302
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 2 001200
5/64 0.0781 1/8 1/4 1.1/2 2 001201
3/32 0.0938 1/8 3/8 1.1/2 2 001202
7/64 0.1094 1/8 3/8 1.1/2 2 001203
1/8 0.1250 1/8 1/2 1.1/2 2 001204
9/64 0.1406 3/16 9/16 2“ 2 001205
5/32 0.1562 3/16 9/16 2“ 2 001206
11/64 0.1719 3/16 9/16 2“ 2 001207
3/16 0.1875 3/16 5/8 2“ 2 001208
13/64 0.2031 1/4 5/8 2.1/2 2 001209
7/32 0.2188 1/4 5/8 2.1/2 2 001210
15/64 0.2344 1/4 3/4 2.1/2 2 001211
1/4 0.2500 1/4 3/4 2.1/2 2 001212
5/16 0.3125 5/16 7/8 2.1/2 2 001216
3/8 0.3750 3/8 7/8 2.1/2 2 001217
7/16 0.4375 7/16 1“ 2.1/2 2 001218
1/2 0.5000 1/2 1“ 3“ 2 001219
9/16 0.5625 9/16 1.1/4 3.1/2 2 001220
5/8 0.6250 5/8 1.1/4 3.1/2 2 001221
11/16 0.6875 3/4 1.1/2 4“ 2 001222
3/4 0.7500 3/4 1.1/2 4“ 2 001223
7/8 0.8750 7/8 1.1/2 4“ 2 001224
1“ 1.0000 1“ 1.1/2 4“ 2 001225
Ɣ2-fl ute, ball nose, regular length
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
364
EB3302G
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 2 002570
5/64 0.0781 1/8 1/4 1.1/2 2 002571
3/32 0.0938 1/8 3/8 1.1/2 2 002572
7/64 0.1094 1/8 3/8 1.1/2 2 002573
1/8 0.1250 1/8 1/2 1.1/2 2 002574
9/64 0.1406 3/16 9/16 2“ 2 002575
5/32 0.1562 3/16 9/16 2“ 2 002576
11/64 0.1719 3/16 9/16 2“ 2 002577
3/16 0.1875 3/16 5/8 2“ 2 002578
13/64 0.2031 1/4 5/8 2.1/2 2 002579
7/32 0.2188 1/4 5/8 2.1/2 2 002580
15/64 0.2344 1/4 3/4 2.1/2 2 002581
1/4 0.2500 1/4 3/4 2.1/2 2 002582
5/16 0.3125 5/16 7/8 2.1/2 2 002583
3/8 0.3750 3/8 7/8 2.1/2 2 002584
7/16 0.4375 7/16 1“ 2.1/2 2 002585
1/2 0.5000 1/2 1“ 3“ 2 002586
9/16 0.5625 9/16 1.1/4 3.1/2 2 002587
5/8 0.6250 5/8 1.1/4 3.1/2 2 002588
11/16 0.6875 3/4 1.1/2 4“ 2 002589
3/4 0.7500 3/4 1.1/2 4“ 2 002590
7/8 0.8750 7/8 1.1/2 4“ 2 002591
1“ 1.0000 1“ 1.1/2 4“ 2 002592
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
Ɣ2-fl ute, ball nose, regular length
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 365
EB3302V
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 2 002630
5/64 0.0781 1/8 1/4 1.1/2 2 002631
3/32 0.0938 1/8 3/8 1.1/2 2 002632
7/64 0.1094 1/8 3/8 1.1/2 2 002633
1/8 0.1250 1/8 1/2 1.1/2 2 002634
9/64 0.1406 3/16 9/16 2“ 2 002635
5/32 0.1562 3/16 9/16 2“ 2 002636
11/64 0.1719 3/16 9/16 2“ 2 002637
3/16 0.1875 3/16 5/8 2“ 2 002638
13/64 0.2031 1/4 5/8 2.1/2 2 002639
7/32 0.2188 1/4 5/8 2.1/2 2 002640
15/64 0.2344 1/4 3/4 2.1/2 2 002641
1/4 0.2500 1/4 3/4 2.1/2 2 002642
5/16 0.3125 5/16 7/8 2.1/2 2 002643
3/8 0.3750 3/8 7/8 2.1/2 2 002644
7/16 0.4375 7/16 1“ 2.1/2 2 002645
1/2 0.5000 1/2 1“ 3“ 2 002646
9/16 0.5625 9/16 1.1/4 3.1/2 2 002647
5/8 0.6250 5/8 1.1/4 3.1/2 2 002648
11/16 0.6875 3/4 1.1/2 4“ 2 002649
3/4 0.7500 3/4 1.1/2 4“ 2 002650
7/8 0.8750 7/8 1.1/2 4“ 2 002651
1“ 1.0000 1“ 1.1/2 4“ 2 002652
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
Ɣ2-fl ute, ball nose, regular length
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
366
EB3302M
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
2.00 0.0787 3.0 6.0 38.0 2 001228
2.50 0.0984 3.0 7.0 38.0 2 001229
3.00 0.1181 3.0 12.0 38.0 2 001230
3.50 0.1378 4.0 12.0 50.0 2 001231
4.00 0.1575 4.0 14.0 50.0 2 001232
4.50 0.1772 5.0 14.0 50.0 2 001233
5.00 0.1969 5.0 16.0 50.0 2 001234
6.00 0.2362 6.0 19.0 63.0 2 001235
7.00 0.2756 8.0 19.0 63.0 2 001236
8.00 0.3150 8.0 19.0 63.0 2 001237
9.00 0.3543 10.0 22.0 70.0 2 001238
10.00 0.3937 10.0 22.0 70.0 2 001239
11.00 0.4331 11.0 25.0 70.0 2 001240
12.00 0.4724 12.0 25.0 75.0 2 001241
14.00 0.5512 14.0 30.0 88.0 2 001242
16.00 0.6299 16.0 32.0 88.0 2 001243
18.00 0.7087 18.0 36.0 100.0 2 001244
20.00 0.7874 20.0 38.0 100.0 2 001245
25.00 0.9843 25.0 38.0 100.0 2 001246
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
Ɣ2-fl ute, ball nose, regular length
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 367
EB3302MG
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
2.00 0.0787 3.0 6.0 38.0 2 004350
2.50 0.0984 3.0 7.0 38.0 2 004351
3.00 0.1181 3.0 12.0 38.0 2 004352
3.50 0.1378 4.0 12.0 50.0 2 004353
4.00 0.1575 4.0 14.0 50.0 2 004354
4.50 0.1772 5.0 14.0 50.0 2 004355
5.00 0.1969 5.0 16.0 50.0 2 004356
6.00 0.2362 6.0 19.0 63.0 2 004357
7.00 0.2756 8.0 19.0 63.0 2 004358
8.00 0.3150 8.0 19.0 63.0 2 004359
9.00 0.3543 10.0 22.0 70.0 2 004360
10.00 0.3937 10.0 22.0 70.0 2 004361
11.00 0.4331 11.0 25.0 70.0 2 004362
12.00 0.4724 12.0 25.0 75.0 2 004363
14.00 0.5512 14.0 30.0 88.0 2 004364
16.00 0.6299 16.0 32.0 88.0 2 004365
18.00 0.7087 18.0 36.0 100.0 2 004366
20.00 0.7874 20.0 38.0 100.0 2 004367
25.00 0.9843 25.0 38.0 100.0 2 004368
Ɣ2-fl ute, ball nose, regular length
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
368
EB3302MV - E4302
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
2.00 0.0787 3.0 6.0 38.0 2 004400
2.50 0.0984 3.0 7.0 38.0 2 004401
3.00 0.1181 3.0 12.0 38.0 2 004402
3.50 0.1378 4.0 12.0 50.0 2 004403
4.00 0.1575 4.0 14.0 50.0 2 004404
4.50 0.1772 5.0 14.0 50.0 2 004405
5.00 0.1969 5.0 16.0 50.0 2 004406
6.00 0.2362 6.0 19.0 63.0 2 004407
7.00 0.2756 8.0 19.0 63.0 2 004408
8.00 0.3150 8.0 19.0 63.0 2 004409
9.00 0.3543 10.0 22.0 70.0 2 004410
10.00 0.3937 10.0 22.0 70.0 2 004411
11.00 0.4331 11.0 25.0 70.0 2 004412
12.00 0.4724 12.0 25.0 75.0 2 004413
14.00 0.5512 14.0 30.0 88.0 2 004414
16.00 0.6299 16.0 32.0 88.0 2 004415
18.00 0.7087 18.0 36.0 100.0 2 004416
20.00 0.7874 20.0 38.0 100.0 2 004417
25.00 0.9843 25.0 38.0 100.0 2 004418
E4302
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 3/8 3“ 2 002200
5/32 0.1562 3/8 7/16 3“ 2 002201
3/16 0.1875 3/8 1/2 3“ 2 002202
7/32 0.2188 3/8 9/16 3“ 2 002203
1/4 0.2500 3/8 5/8 3“ 2 002204
5/16 0.3125 3/8 3/4 3.1/2 2 002206
3/8 0.3750 3/8 3/4 3.1/2 2 002208
7/16 0.4375 7/16 7/8 4“ 2 002209
1/2 0.5000 1/2 1“ 4“ 2 002210
Ɣ2-fl ute, ball nose, regular length
Ɣ2-fl ute, double end, regular length
EB3302MV
Ɣ Fraises de fi nition bout hémisphériqueƔEnd Mill ƔFresas con punta esferica
ƔEnd Mill Ɣ Fraises de fi nition - Double ƔFresas de acabado - Doble fi nal
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 369
EB4302 - E6302
EB4302
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 3/8 3“ 2 002300
5/32 0.1562 3/8 7/16 3“ 2 002301
3/16 0.1875 3/8 1/2 3“ 2 002302
7/32 0.2188 3/8 9/16 3“ 2 002303
1/4 0.2500 3/8 5/8 3“ 2 002304
5/16 0.3125 3/8 3/4 3.1/2 2 002306
3/8 0.3750 3/8 3/4 3.1/2 2 002308
7/16 0.4375 7/16 7/8 4“ 2 002309
1/2 0.5000 1/2 1“ 4“ 2 002310
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1“ 3“ 2 004800
3/16 0.1875 3/16 1.1/8 3“ 2 004801
1/4 0.2500 1/4 1.1/2 4“ 2 004802
5/16 0.3125 5/16 1.5/8 4“ 2 004803
3/8 0.3750 3/8 1.3/4 4“ 2 004804
7/16 0.4375 7/16 3“ 6“ 2 004805
1/2 0.5000 1/2 3“ 6“ 2 004806
5/8 0.6250 5/8 3“ 6“ 2 004807
3/4 0.7500 3/4 3“ 6“ 2 004808
1“ 1.0000 1 3“ 6“ 2 004809
Ɣ2-fl ute, ball nose, double end,
regular length
Ɣ2-Flute, Extra Length
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique -
Double
ƔFresas con punta esferica - Doble fi nal
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
E6302
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
370
E6302G - E6302V
E6302G
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1“ 3“ 2 003100
3/16 0.1875 3/16 1.1/8 3“ 2 003101
1/4 0.2500 1/4 1.1/2 4“ 2 003102
5/16 0.3125 5/16 1.5/8 4“ 2 003103
3/8 0.3750 3/8 1.3/4 4“ 2 003104
7/16 0.4375 7/16 3“ 6“ 2 003105
1/2 0.5000 1/2 3“ 6“ 2 003106
5/8 0.6250 5/8 3“ 6“ 2 003107
3/4 0.7500 3/4 3“ 6“ 2 003108
1“ 1.0000 1 3“ 6“ 2 003109
E6302V
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1“ 3“ 2 003130
3/16 0.1875 3/16 1.1/8 3“ 2 003131
1/4 0.2500 1/4 1.1/2 4“ 2 003132
5/16 0.3125 5/16 1.5/8 4“ 2 003133
3/8 0.3750 3/8 1.3/4 4“ 2 003134
7/16 0.4375 7/16 3“ 6“ 2 003135
1/2 0.5000 1/2 3“ 6“ 2 003136
5/8 0.6250 5/8 3“ 6“ 2 003137
3/4 0.7500 3/4 3“ 6“ 2 003138
1“ 1.0000 1 3“ 6“ 2 003139
Ɣ2-fl ute, extra length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 371
EB6302 - EB6302G
EB6302
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1“ 3“ 2 005400
3/16 0.1875 3/16 1.1/8 3“ 2 005401
1/4 0.2500 1/4 1.1/2 4“ 2 005402
5/16 0.3125 5/16 1.5/8 4“ 2 005403
3/8 0.3750 3/8 1.3/4 4“ 2 005404
7/16 0.4375 7/16 3“ 6“ 2 005405
1/2 0.5000 1/2 3“ 6“ 2 005406
5/8 0.6250 5/8 3“ 6“ 2 005407
3/4 0.7500 3/4 3“ 6“ 2 005408
1“ 1.0000 1 3“ 6“ 2 005409
EB6302G
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1“ 3“ 2 003670
3/16 0.1875 3/16 1.1/8 3“ 2 003671
1/4 0.2500 1/4 1.1/2 4“ 2 003672
5/16 0.3125 5/16 1.5/8 4“ 2 003673
3/8 0.3750 3/8 1.3/4 4“ 2 003674
7/16 0.4375 7/16 3“ 6“ 2 003675
1/2 0.5000 1/2 3“ 6“ 2 003676
5/8 0.6250 5/8 3“ 6“ 2 003677
3/4 0.7500 3/4 3“ 6“ 2 003678
1“ 1.0000 1 3“ 6“ 2 003679
ƔEnd Mill, Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
Ɣ2-fl ute, ball nose, extra length
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
372
Ɣ Fraises de fi nition
Ɣ3-fl ute, standard length
EB6302V - E3303
EB6302V
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1“ 3“ 2 003700
3/16 0.1875 3/16 1.1/8 3“ 2 003701
1/4 0.2500 1/4 1.1/2 4“ 2 003702
5/16 0.3125 5/16 1.5/8 4“ 2 003703
3/8 0.3750 3/8 1.3/4 4“ 2 003704
7/16 0.4375 7/16 3“ 6“ 2 003705
1/2 0.5000 1/2 3“ 6“ 2 003706
5/8 0.6250 5/8 3“ 6“ 2 003707
3/4 0.7500 3/4 3“ 6“ 2 003708
1“ 1.0000 1 3“ 6“ 2 003709
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 3 001050
3/32 0.0938 1/8 3/8 1.1/2 3 001052
1/8 0.1250 1/8 1/2 1.1/2 3 001054
5/32 0.1562 3/16 9/16 2“ 3 001056
3/16 0.1875 3/16 5/8 2“ 3 001058
7/32 0.2188 1/4 5/8 2.1/2 3 001060
1/4 0.2500 1/4 3/4 2.1/2 3 001062
5/16 0.3125 5/16 7/8 2.1/2 3 001066
3/8 0.3750 3/8 7/8 2.1/2 3 001067
7/16 0.4375 7/16 1“ 2.1/2 3 001068
1/2 0.5000 1/2 1“ 3“ 3 001069
ƔEnd Mill ƔFresas de acabado
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
E3303
Ɣ2-fl ute, ball nose, extra length
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 373
E3303G - E3303V
E3303G
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 3 002880
3/32 0.0938 1/8 3/8 1.1/2 3 002881
1/8 0.1250 1/8 1/2 1.1/2 3 002882
5/32 0.1562 3/16 9/16 2“ 3 002883
3/16 0.1875 3/16 5/8 2“ 3 002884
7/32 0.2188 1/4 5/8 2.1/2 3 002885
1/4 0.2500 1/4 3/4 2.1/2 3 002886
5/16 0.3125 5/16 7/8 2.1/2 3 002887
3/8 0.3750 3/8 7/8 2.1/2 3 002888
7/16 0.4375 7/16 1“ 2.1/2 3 002889
1/2 0.5000 1/2 1“ 3“ 3 002890
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 3 002920
3/32 0.0938 1/8 3/8 1.1/2 3 002921
1/8 0.1250 1/8 1/2 1.1/2 3 002922
5/32 0.1562 3/16 9/16 2“ 3 002923
3/16 0.1875 3/16 5/8 2“ 3 002924
7/32 0.2188 1/4 5/8 2.1/2 3 002925
1/4 0.2500 1/4 3/4 2.1/2 3 002926
5/16 0.3125 5/16 7/8 2.1/2 3 002927
3/8 0.3750 3/8 7/8 2.1/2 3 002928
7/16 0.4375 7/16 1“ 2.1/2 3 002929
1/2 0.5000 1/2 1“ 3“ 3 002930
E3303V
Ɣ3-fl ute, regular length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
374
E1304 - E1304G
E1304
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/8 1.1/2 4 001852
3/32 0.0938 1/8 3/16 1.1/2 4 001854
1/8 0.1250 1/8 1/4 1.1/2 4 001856
5/32 0.1562 3/16 5/16 2“ 4 001858
3/16 0.1875 3/16 3/8 2“ 4 001860
7/32 0.2188 1/4 7/16 2“ 4 001861
1/4 0.2500 1/4 1/2 2“ 4 001862
5/16 0.3125 5/16 1/2 2“ 4 001863
3/8 0.3750 3/8 5/8 2“ 4 001864
7/16 0.4375 7/16 5/8 2.1/2 4 001865
1/2 0.5000 1/2 5/8 2.1/2 4 001866
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/8 1.1/2 4 006852
3/32 0.0938 1/8 3/16 1.1/2 4 006854
1/8 0.1250 1/8 1/4 1.1/2 4 006856
5/32 0.1562 3/16 5/16 2“ 4 006858
3/16 0.1875 3/16 3/8 2“ 4 006860
7/32 0.2188 1/4 7/16 2“ 4 006861
1/4 0.2500 1/4 1/2 2“ 4 006862
5/16 0.3125 5/16 1/2 2“ 4 006863
3/8 0.3750 3/8 5/8 2“ 4 006864
7/16 0.4375 7/16 5/8 2.1/2 4 006865
1/2 0.5000 1/2 5/8 2.1/2 4 006866
E1304G
Ɣ4-fl ute, stub length
ƔEnd Mill Ɣ Fraises defi nition ƔFresas de acabado
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 375
E1304V - E2304
E1304V
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/8 1.1/2 4 002765
3/32 0.0938 1/8 3/16 1.1/2 4 002766
1/8 0.1250 1/8 1/4 1.1/2 4 002767
5/32 0.1562 3/16 5/16 2“ 4 002768
3/16 0.1875 3/16 3/8 2“ 4 002769
7/32 0.2188 1/4 7/16 2“ 4 002770
1/4 0.2500 1/4 1/2 2“ 4 002771
5/16 0.3125 5/16 1/2 2“ 4 002772
3/8 0.3750 3/8 5/8 2“ 4 002773
7/16 0.4375 7/16 5/8 2.1/2 4 002774
1/2 0.5000 1/2 5/8 2.1/2 4 002775
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/8 1.1/2 4 002052
3/32 0.0938 1/8 3/16 1.1/2 4 002053
1/8 0.1250 1/8 1/4 1.1/2 4 002054
3/16 0.1875 3/16 3/8 2“ 4 002056
1/4 0.2500 1/4 1/2 2.1/2 4 002058
5/16 0.3125 5/16 1/2 2.1/2 4 002059
3/8 0.3750 3/8 1/2 2.1/2 4 002060
1/2 0.5000 1/2 5/8 3“ 4 002062
E2304
Ɣ4-fl ute, double end, stub length
Ɣ Fraises de fi nition - Double ƔFresas de acabado - Doble fi nal
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ4-fl ute, stub length
ƔEnd Mill
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
376
E3304
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 4 001100
5/64 0.0781 1/8 1/4 1.1/2 4 001101
3/32 0.0938 1/8 3/8 1.1/2 4 001102
7/64 0.1094 1/8 3/8 1.1/2 4 001103
1/8 0.1250 1/8 1/2 1.1/2 4 001104
9/64 0.1406 3/16 9/16 2“ 4 001105
5/32 0.1562 3/16 9/16 2“ 4 001106
11/64 0.1719 3/16 9/16 2“ 4 001107
3/16 0.1875 3/16 5/8 2“ 4 001108
13/64 0.2031 1/4 5/8 2.1/2 4 001109
7/32 0.2188 1/4 5/8 2.1/2 4 001110
15/64 0.2344 1/4 3/4 2.1/2 4 001111
1/4 0.2500 1/4 3/4 2.1/2 4 001112
5/16 0.3125 5/16 7/8 2.1/2 4 001116
3/8 0.3750 3/8 7/8 2.1/2 4 001117
7/16 0.4375 7/16 1“ 2.1/2 4 001118
1/2 0.5000 1/2 1“ 3“ 4 001119
9/16 0.5625 9/16 1.1/4 3.1/2 4 001120
5/8 0.6250 5/8 1.1/4 3.1/2 4 001121
11/16 0.6875 3/4 1.1/2 4“ 4 001122
3/4 0.7500 3/4 1.1/2 4“ 4 001123
7/8 0.8750 7/8 1.1/2 4“ 4 001124
1“ 1.0000 1“ 1.1/2 4“ 4 001125
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ4-fl ute, regular length
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 377
E3304G
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 4 005300
5/64 0.0781 1/8 1/4 1.1/2 4 005301
3/32 0.0938 1/8 3/8 1.1/2 4 005302
7/64 0.1094 1/8 3/8 1.1/2 4 005303
1/8 0.1250 1/8 1/2 1.1/2 4 005304
9/64 0.1406 3/16 9/16 2“ 4 005305
5/32 0.1562 3/16 9/16 2“ 4 005306
11/64 0.1719 3/16 9/16 2“ 4 005307
3/16 0.1875 3/16 5/8 2“ 4 005308
13/64 0.2031 1/4 5/8 2.1/2 4 005309
7/32 0.2188 1/4 5/8 2.1/2 4 005310
15/64 0.2344 1/4 3/4 2.1/2 4 005311
1/4 0.2500 1/4 3/4 2.1/2 4 005312
5/16 0.3125 5/16 7/8 2.1/2 4 005316
3/8 0.3750 3/8 7/8 2.1/2 4 005317
7/16 0.4375 7/16 1“ 2.1/2 4 005318
1/2 0.5000 1/2 1“ 3“ 4 005319
9/16 0.5625 9/16 1.1/4 3.1/2 4 005320
5/8 0.6250 5/8 1.1/4 3.1/2 4 005321
11/16 0.6875 3/4 1.1/2 4“ 4 005322
3/4 0.7500 3/4 1.1/2 4“ 4 005323
7/8 0.8750 7/8 1.1/2 4“ 4 005324
1“ 1.0000 1“ 1.1/2 4“ 4 005325
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ4-fl ute, regular length
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
378
E3304V
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 4 002690
5/64 0.0781 1/8 1/4 1.1/2 4 002691
3/32 0.0938 1/8 3/8 1.1/2 4 002692
7/64 0.1094 1/8 3/8 1.1/2 4 002693
1/8 0.1250 1/8 1/2 1.1/2 4 002694
9/64 0.1406 3/16 9/16 2“ 4 002695
5/32 0.1562 3/16 9/16 2“ 4 002696
11/64 0.1719 3/16 9/16 2“ 4 002697
3/16 0.1875 3/16 5/8 2“ 4 002698
13/64 0.2031 1/4 5/8 2.1/2 4 002699
7/32 0.2188 1/4 5/8 2.1/2 4 002700
15/64 0.2344 1/4 3/4 2.1/2 4 002701
1/4 0.2500 1/4 3/4 2.1/2 4 002702
5/16 0.3125 5/16 7/8 2.1/2 4 002703
3/8 0.3750 3/8 7/8 2.1/2 4 002704
7/16 0.4375 7/16 1“ 2.1/2 4 002705
1/2 0.5000 1/2 1“ 3“ 4 002706
9/16 0.5625 9/16 1.1/4 3.1/2 4 002707
5/8 0.6250 5/8 1.1/4 3.1/2 4 002708
11/16 0.6875 3/4 1.1/2 4“ 4 002709
3/4 0.7500 3/4 1.1/2 4“ 4 002710
7/8 0.8750 7/8 1.1/2 4“ 4 002711
1“ 1.0000 1“ 1.1/2 4“ 4 002712
Ɣ4-fl ute, regular length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 379
E3304M
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
2.00 0.0787 3.0 6.0 38.0 4 001128
2.50 0.0984 3.0 7.0 38.0 4 001129
3.00 0.1181 3.0 12.0 38.0 4 001130
3.50 0.1378 4.0 12.0 50.0 4 001131
4.00 0.1575 4.0 14.0 50.0 4 001132
4.50 0.1772 5.0 14.0 50.0 4 001133
5.00 0.1969 5.0 16.0 50.0 4 001134
6.00 0.2362 6.0 19.0 63.0 4 001135
7.00 0.2756 8.0 19.0 63.0 4 001136
8.00 0.3150 8.0 19.0 63.0 4 001137
9.00 0.3543 10.0 22.0 70.0 4 001138
10.00 0.3937 10.0 22.0 70.0 4 001139
11.00 0.4331 11.0 25.0 70.0 4 001140
12.00 0.4724 12.0 25.0 75.0 4 001141
14.00 0.5512 14.0 30.0 88.0 4 001143
16.00 0.6299 16.0 32.0 88.0 4 001144
18.00 0.7087 18.0 36.0 100.0 4 001145
20.00 0.7874 20.0 38.0 100.0 4 001146
25.00 0.9843 25.0 38.0 100.0 4 001147
Ɣ4-fl ute, regular length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
380
E3304MG
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
2.00 0.0787 3.0 6.0 38.0 4 005328
2.50 0.0984 3.0 7.0 38.0 4 005329
3.00 0.1181 3.0 12.0 38.0 4 005330
3.50 0.1378 4.0 12.0 50.0 4 005331
4.00 0.1575 4.0 14.0 50.0 4 005332
4.50 0.1772 5.0 14.0 50.0 4 005333
5.00 0.1969 5.0 16.0 50.0 4 005334
6.00 0.2362 6.0 19.0 63.0 4 005335
7.00 0.2756 8.0 19.0 63.0 4 005336
8.00 0.3150 8.0 19.0 63.0 4 005337
9.00 0.3543 10.0 22.0 70.0 4 005338
10.00 0.3937 10.0 22.0 70.0 4 005339
11.00 0.4331 11.0 25.0 70.0 4 005340
12.00 0.4724 12.0 25.0 75.0 4 005341
14.00 0.5512 14.0 30.0 88.0 4 005343
16.00 0.6299 16.0 32.0 88.0 4 005344
18.00 0.7087 18.0 36.0 100.0 4 005345
20.00 0.7874 20.0 38.0 100.0 4 005346
25.00 0.9843 25.0 38.0 100.0 4 005347
Ɣ4-fl ute, regular length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 381
E3304MV
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
2.00 0.0787 3.0 6.0 38.0 4 004325
2.50 0.0984 3.0 7.0 38.0 4 004326
3.00 0.1181 3.0 12.0 38.0 4 004327
3.50 0.1378 4.0 12.0 50.0 4 004328
4.00 0.1575 4.0 14.0 50.0 4 004329
4.50 0.1772 5.0 14.0 50.0 4 004330
5.00 0.1969 5.0 16.0 50.0 4 004331
6.00 0.2362 6.0 19.0 63.0 4 004332
7.00 0.2756 8.0 19.0 63.0 4 004333
8.00 0.3150 8.0 19.0 63.0 4 004334
9.00 0.3543 10.0 22.0 70.0 4 004335
10.00 0.3937 10.0 22.0 70.0 4 004336
11.00 0.4331 11.0 25.0 70.0 4 004337
12.00 0.4724 12.0 25.0 75.0 4 004338
14.00 0.5512 14.0 30.0 88.0 4 004339
16.00 0.6299 16.0 32.0 88.0 4 004340
18.00 0.7087 18.0 36.0 100.0 4 004341
20.00 0.7874 20.0 38.0 100.0 4 004342
25.00 0.9843 25.0 38.0 100.0 4 004343
Ɣ4-fl ute, regular length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
382
EB3304
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 4 001300
5/64 0.0781 1/8 1/4 1.1/2 4 001301
3/32 0.0938 1/8 3/8 1.1/2 4 001302
7/64 0.1094 1/8 3/8 1.1/2 4 001303
1/8 0.1250 1/8 1/2 1.1/2 4 001304
9/64 0.1406 3/16 9/16 2“ 4 001305
5/32 0.1562 3/16 9/16 2“ 4 001306
11/64 0.1719 3/16 9/16 2“ 4 001307
3/16 0.1875 3/16 5/8 2“ 4 001308
13/64 0.2031 1/4 5/8 2.1/2 4 001309
7/32 0.2188 1/4 5/8 2.1/2 4 001310
15/64 0.2344 1/4 3/4 2.1/2 4 001311
1/4 0.2500 1/4 3/4 2.1/2 4 001312
5/16 0.3125 5/16 7/8 2.1/2 4 001316
3/8 0.3750 3/8 7/8 2.1/2 4 001317
7/16 0.4375 7/16 1“ 2.1/2 4 001318
1/2 0.5000 1/2 1“ 3“ 4 001319
9/16 0.5625 9/16 1.1/4 3.1/2 4 001320
5/8 0.6250 5/8 1.1/4 3.1/2 4 001321
11/16 0.6875 3/4 1.1/2 4“ 4 001322
3/4 0.7500 3/4 1.1/2 4“ 4 001323
7/8 0.8750 7/8 1.1/2 4“ 4 001324
1“ 1.0000 1“ 1.1/2 4“ 4 001325
Ɣ4-fl ute, ball nose, regular length
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 383
EB3304G
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 4 003010
5/64 0.0781 1/8 1/4 1.1/2 4 003011
3/32 0.0938 1/8 3/8 1.1/2 4 003012
7/64 0.1094 1/8 3/8 1.1/2 4 003013
1/8 0.1250 1/8 1/2 1.1/2 4 003014
9/64 0.1406 3/16 9/16 2“ 4 003015
5/32 0.1562 3/16 9/16 2“ 4 003016
11/64 0.1719 3/16 9/16 2“ 4 003017
3/16 0.1875 3/16 5/8 2“ 4 003018
13/64 0.2031 1/4 5/8 2.1/2 4 003019
7/32 0.2188 1/4 5/8 2.1/2 4 003020
15/64 0.2344 1/4 3/4 2.1/2 4 003021
1/4 0.2500 1/4 3/4 2.1/2 4 003022
5/16 0.3125 5/16 7/8 2.1/2 4 003023
3/8 0.3750 3/8 7/8 2.1/2 4 003024
7/16 0.4375 7/16 1“ 2.1/2 4 003025
1/2 0.5000 1/2 1“ 3“ 4 003026
9/16 0.5625 9/16 1.1/4 3.1/2 4 003027
5/8 0.6250 5/8 1.1/4 3.1/2 4 003028
11/16 0.6875 3/4 1.1/2 4“ 4 003029
3/4 0.7500 3/4 1.1/2 4“ 4 003030
7/8 0.8750 7/8 1.1/2 4“ 4 003031
1“ 1.0000 1“ 1.1/2 4“ 4 003032
Ɣ4-fl ute, ball nose, regular length
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
384
EB3304V - EB3304MV
EB3304V
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
1/16 0.0625 1/8 1/4 1.1/2 4 003070
5/64 0.0781 1/8 1/4 1.1/2 4 003071
3/32 0.0938 1/8 3/8 1.1/2 4 003072
7/64 0.1094 1/8 3/8 1.1/2 4 003073
1/8 0.1250 1/8 1/2 1.1/2 4 003074
9/64 0.1406 3/16 9/16 2“ 4 003075
5/32 0.1562 3/16 9/16 2“ 4 003076
11/64 0.1719 3/16 9/16 2“ 4 003077
3/16 0.1875 3/16 5/8 2“ 4 003078
13/64 0.2031 1/4 5/8 2.1/2 4 003079
7/32 0.2188 1/4 5/8 2.1/2 4 003080
15/64 0.2344 1/4 3/4 2.1/2 4 003081
1/4 0.2500 1/4 3/4 2.1/2 4 003082
5/16 0.3125 5/16 7/8 2.1/2 4 003083
3/8 0.3750 3/8 7/8 2.1/2 4 003084
7/16 0.4375 7/16 1“ 2.1/2 4 003085
1/2 0.5000 1/2 1“ 3“ 4 003086
9/16 0.5625 9/16 1.1/4 3.1/2 4 003087
5/8 0.6250 5/8 1.1/4 3.1/2 4 003088
11/16 0.6875 3/4 1.1/2 4“ 4 003089
3/4 0.7500 3/4 1.1/2 4“ 4 003090
7/8 0.8750 7/8 1.1/2 4“ 4 003091
1“ 1.0000 1“ 1.1/2 4“ 4 003092
Ɣ4-fl ute, ball nose, regular length
EB3304MV
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
2.00 0.0787 3.0 6.0 38.0 4 004750
2.50 0.0984 3.0 7.0 38.0 4 004751
3.00 0.1181 3.0 12.0 38.0 4 004752
3.50 0.1378 4.0 12.0 50.0 4 004753
4.00 0.1575 4.0 14.0 50.0 4 004754
4.50 0.1772 5.0 14.0 50.0 4 004755
5.00 0.1969 5.0 16.0 50.0 4 004756
6.00 0.2362 6.0 19.0 63.0 4 004757
7.00 0.2756 8.0 19.0 63.0 4 004758
8.00 0.3150 8.0 19.0 63.0 4 004759
9.00 0.3543 10.0 22.0 70.0 4 004760
10.00 0.3937 10.0 22.0 70.0 4 004761
11.00 0.4331 11.0 25.0 70.0 4 004762
12.00 0.4724 12.0 25.0 75.0 4 004763
14.00 0.5512 14.0 30.0 88.0 4 004764
16.00 0.6299 16.0 32.0 88.0 4 004765
18.00 0.7087 18.0 36.0 100.0 4 004766
20.00 0.7874 20.0 38.0 100.0 4 004767
25.00 0.9843 25.0 38.0 100.0 4 004768
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 385
EB3304M
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
2.00 0.0787 3.0 6.0 38.0 4 001344
2.50 0.0984 3.0 7.0 38.0 4 001343
3.00 0.1181 3.0 12.0 38.0 4 001342
3.50 0.1378 4.0 12.0 50.0 4 001341
4.00 0.1575 4.0 14.0 50.0 4 001340
4.50 0.1772 5.0 14.0 50.0 4 001339
5.00 0.1969 5.0 16.0 50.0 4 001338
6.00 0.2362 6.0 19.0 63.0 4 001337
7.00 0.2756 8.0 19.0 63.0 4 001336
8.00 0.3150 8.0 19.0 63.0 4 001335
9.00 0.3543 10.0 22.0 70.0 4 001334
10.00 0.3937 10.0 22.0 70.0 4 001333
11.00 0.4331 11.0 25.0 70.0 4 001332
12.00 0.4724 12.0 25.0 75.0 4 001331
14.00 0.5512 14.0 30.0 88.0 4 001330
16.00 0.6299 16.0 32.0 88.0 4 001329
18.00 0.7087 18.0 36.0 100.0 4 001328
20.00 0.7874 20.0 38.0 100.0 4 001327
25.00 0.9843 25.0 38.0 100.0 4 001326
Ɣ4-fl ute, ball nose, regular length
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
386
EB3304MG - E4304
ŶƔ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
2.00 0.0787 3.0 6.0 38.0 4 004640
2.50 0.0984 3.0 7.0 38.0 4 004641
3.00 0.1181 3.0 12.0 38.0 4 004642
3.50 0.1378 4.0 12.0 50.0 4 004643
4.00 0.1575 4.0 14.0 50.0 4 004644
4.50 0.1772 5.0 14.0 50.0 4 004645
5.00 0.1969 5.0 16.0 50.0 4 004646
6.00 0.2362 6.0 19.0 63.0 4 004647
7.00 0.2756 8.0 19.0 63.0 4 004648
8.00 0.3150 8.0 19.0 63.0 4 004649
9.00 0.3543 10.0 22.0 70.0 4 004650
10.00 0.3937 10.0 22.0 70.0 4 004651
11.00 0.4331 11.0 25.0 70.0 4 004652
12.00 0.4724 12.0 25.0 75.0 4 004653
14.00 0.5512 14.0 30.0 88.0 4 004654
16.00 0.6299 16.0 32.0 88.0 4 004655
18.00 0.7087 18.0 36.0 100.0 4 004656
20.00 0.7874 20.0 38.0 100.0 4 004657
25.00 0.9843 25.0 38.0 100.0 4 004658
Ɣ4-fl ute, ball nose, regular length
EB3304MG
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
E4304
Ŷ
Ɣ
d1
Ø
mm
d1
decimal
Inch
d2
Ø
mm
l2
mm
l1
mm # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 3/8 3“ 4 002250
5/32 0.1562 3/8 7/16 3“ 4 002251
3/16 0.1875 3/8 1/2 3“ 4 002252
7/32 0.2188 3/8 9/16 3“ 4 002253
1/4 0.2500 3/8 5/8 3“ 4 002254
5/16 0.3125 3/8 3/4 3.1/2 4 002256
3/8 0.3750 3/8 3/4 3.1/2 4 002258
7/16 0.4375 7/16 7/8 4“ 4 002259
1/2 0.5000 1/2 1“ 4“ 4 002260
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 387
EB4304 - E6304
EB4304
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 3/8 3“ 4 002350
5/32 0.1562 3/8 7/16 3“ 4 002351
3/16 0.1875 3/8 1/2 3“ 4 002352
7/32 0.2188 3/8 9/16 3“ 4 002353
1/4 0.2500 3/8 5/8 3“ 4 002354
5/16 0.3125 3/8 3/4 3.1/2 4 002356
3/8 0.3750 3/8 3/4 3.1/2 4 002358
7/16 0.4375 7/16 7/8 4“ 4 002359
1/2 0.5000 1/2 1“ 4“ 4 002360
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1“ 3“ 4 004900
3/16 0.1875 3/16 1.1/8 3“ 4 004901
1/4 0.2500 1/4 1.1/2 4“ 4 004902
5/16 0.3125 5/16 1.5/8 4“ 4 004903
3/8 0.3750 3/8 1.3/4 4“ 4 004904
7/16 0.4375 7/16 3“ 6“ 4 004905
1/2 0.5000 1/2 3“ 6“ 4 004906
5/8 0.6250 5/8 3“ 6“ 4 004907
3/4 0.7500 3/4 3“ 6“ 4 004908
1“ 1.0000 1 3“ 6“ 4 004909
ƔEnd Mill Ɣ Fraises de fi nition Ɣ Fresas de acabado
E6304
Ɣ4-fl ute, ball nose, double end,
regular length
Ɣ4-fl ute, extra length
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique -
Double
ƔFresas con punta esferica - Doble fi nal
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
388
E6304G - E6304V
E6304G
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1“ 3“ 4 003285
3/16 0.1875 3/16 1.1/8 3“ 4 003286
1/4 0.2500 1/4 1.1/2 4“ 4 003287
5/16 0.3125 5/16 1.5/8 4“ 4 003288
3/8 0.3750 3/8 1.3/4 4“ 4 003289
7/16 0.4375 7/16 3“ 6“ 4 003290
1/2 0.5000 1/2 3“ 6“ 4 003291
5/8 0.6250 5/8 3“ 6“ 4 003292
3/4 0.7500 3/4 3“ 6“ 4 003293
1“ 1.0000 1 3“ 6“ 4 003294
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1“ 3“ 4 003165
3/16 0.1875 3/16 1.1/8 3“ 4 003166
1/4 0.2500 1/4 1.1/2 4“ 4 003167
5/16 0.3125 5/16 1.5/8 4“ 4 003168
3/8 0.3750 3/8 1.3/4 4“ 4 003169
7/16 0.4375 7/16 3“ 6“ 4 003170
1/2 0.5000 1/2 3“ 6“ 4 003171
5/8 0.6250 5/8 3“ 6“ 4 003172
3/4 0.7500 3/4 3“ 6“ 4 003173
1“ 1.0000 1 3“ 6“ 4 003174
E6304V
Ɣ4-fl ute, extra length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 389
EB6304 - EB6304G
EB6304
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1“ 3“ 4 005700
3/16 0.1875 3/16 1.1/8 3“ 4 005701
1/4 0.2500 1/4 1.1/2 4“ 4 005702
5/16 0.3125 5/16 1.5/8 4“ 4 005703
3/8 0.3750 3/8 1.3/4 4“ 4 005704
7/16 0.4375 7/16 3“ 6“ 4 005705
1/2 0.5000 1/2 3“ 6“ 4 005706
5/8 0.6250 5/8 3“ 6“ 4 005707
3/4 0.7500 3/4 3“ 6“ 4 005708
1“ 1.0000 1 3“ 6“ 4 005709
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1“ 3“ 4 003715
3/16 0.1875 3/16 1.1/8 3“ 4 003716
1/4 0.2500 1/4 1.1/2 4“ 4 003717
5/16 0.3125 5/16 1.5/8 4“ 4 003718
3/8 0.3750 3/8 1.3/4 4“ 4 003719
7/16 0.4375 7/16 3“ 6“ 4 003720
1/2 0.5000 1/2 3“ 6“ 4 003721
5/8 0.6250 5/8 3“ 6“ 4 003722
3/4 0.7500 3/4 3“ 6“ 4 003723
1“ 1.0000 1 3“ 6“ 4 003724
EB6304G
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
Ɣ4-fl ute, ball nose, extra length
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
390
EB6304V - RTDA
EB6304V
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 1/8 1“ 3“ 4 003745
3/16 0.1875 3/16 1.1/8 3“ 4 003746
1/4 0.2500 1/4 1.1/2 4“ 4 003747
5/16 0.3125 5/16 1.5/8 4“ 4 003748
3/8 0.3750 3/8 1.3/4 4“ 4 003749
7/16 0.4375 7/16 3“ 6“ 4 003750
1/2 0.5000 1/2 3“ 6“ 4 003751
5/8 0.6250 5/8 3“ 6“ 4 003752
3/4 0.7500 3/4 3“ 6“ 4 003753
1“ 1.0000 1 3“ 6“ 4 003754
RTDA
d1
Ø
Inch type
d1
dec.
Inch
d2
Ø
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/8 Coarse 0.1250 1/8 1/2 1.1/2 002505
1/8 Medium 0.1250 1/8 1/2 1.1/2 002506
3/16 Coarse 0.1875 3/16 5/8 2“ 002507
3/16 Coarse 0.1875 1/4 5/8 2“ 002508
3/16 Medium 0.1875 3/16 5/8 2“ 002509
3/16 Medium 0.1875 1/4 5/8 2“ 002510
d1
Ø
Inch type
d1
dec.
Inch
d2
Ø
Inch l2
Inch l1
Inch
EDP #
or
e-Code
1/4 Coarse 0.2500 1/4 3/4 2“ 002511
1/4 Fine 0.2500 1/4 3/4 2“ 002512
1/4 Coarse 0.2500 1/4 1“ 3“ 002513
1/4 Fine 0.2500 1/4 1“ 3“ 002514
5/16 Medium 0.3125 5/16 1“ 2.1/2 002515
3/8 Medium 0.3750 3/8 1“ 2.1/2 002516
1/2 Medium 0.5000 1/2 1“ 3“ 002517
ƔRouter
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
Ɣ4-fl ute, ball nose, extra length
www.precisiondormer.com
Style Description #Flutes Finish Page No.
HSS End Mill Table of Contents
391
9002 Rougher, Multi-Flute 4-8 HSCo, Bright
TN9002 Rougher, Multi-Flute 4-8 HSCo, TiN
TC9002 Rougher, Multi-Flute 4-8 HSCo, TiCN
9008 Rougher, Multi-Flute 4-8 HSCo, Bright
TN9008 Rougher, Multi-Flute 4-8 HSCo, TiN
TC9008 Rougher, Multi-Flute 4-8 HSCo, TiCN
9003 Rougher, Multi-Flute 4-8 HSCo, Bright
TN9003 Rougher, Multi-Flute 4-8 HSCo, TiN
TC9003 Rougher, Multi-Flute 4-8 HSCo, TiCN
9009 Rougher, Multi-Flute 4-8 HSCo, Bright
TN9009 Rougher, Multi-Flute 4-8 HSCo, TiN
TC9009 Rougher, Multi Flute 4-8 HSCo, TiCN
9004 Rougher, Multi-Flute 3-6 HSCo, Bright
963 Regular Length 2 HSCo, Bright
960 Regular Length, Multi-Flute 4-6 HSCo, Bright
961 Regular Length, Multi-Flute 4-6 HSCo, Bright
962 Extra Length 4 HSCo, Bright
920 Regular Length 2 HSS, Bright
920K Keyway, Regular Length 2 HSS, Bright
TN920 Regular Length 2 HSS, TiN
905 Ball Nose, Regular Length 2 HSS, Bright
921 Long Length 2 HSS, Bright
TN921 Long Length 2 HSS, TiN
922 Long Length 2 HSS, Bright
980 Regular Length 2 HSS, Bright
981 Long Length 2 HSS, Bright
982 Extra Length 2 HSS, Bright
923 Regular Length 2 HSS, Bright
TN923 Regular Length 2 HSS, TiN
907 Ball Nose, Regular Length 2 HSS, Bright
930 Regular Length 3 HSS, Bright
931 Long Length 3 HSS, Bright
933 Regular Length 3 HSS, Bright
940 Regular Length 4 HSS, Bright
TN940 Regular Length 4 HSS, TiN
941 Long Length 4 HSS, Bright
944 Extra Length 4 HSS, Bright
945 Regular Length 4 HSS, Bright
TN945 Regular Length 4 HSS, TiN
900 Ball Nose, Regular Length 4 HSS, Bright
946 Long Length 4 HSS, Bright
TN946 Long Length 4 HSS, TiN
901 Ball Nose, Long Length 4 HSS, Bright
947 Extra Length 4 HSS, Bright
943 Double End, Regular Length 4 HSS, Bright
TN943 Double End, Regular Length 4 HSS, TiN
948 Double End, Regular Length 4 HSS, Bright
TN948 Double End, Regular Length 4 HSS, TiN
911 Miniature, Double End 2 HSS, Bright
917 Miniature, Double End 4 HSS, Bright
919 Miniature, Double End 4 HSS, Bright
883 Corner Rounding Cutter N/A HSS, Bright
C191 Slot Drill, Stub Length 2 HSCo, Bronze
C192 Slot Drill, Stub Length 2 HSCo, Bronze
C291 Regular Length 2-8 HSCo, Bronze
C292 Long Length 2-6 HSCo, Bronze
C391 Slot Drill, Standard Length 3 HSCo, Bronze
C392 Slot Drill, Long Length 3 HSCo, Bronze
400
400
401
402
402
403
403
404
404
405
405
406
406
407
407
408
408
409
410
411
412
412
413
413
414
414
415
415
416
416
417
418
418
419
420
421
421
422
422
423
423
424
424
425
425
426
427
427
428
428
429
429
430
432
433
435
436
436
www.precisiondormer.com
How To Use This Chart to Find Cutting Feed Rate (IPR):
1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code).
2. Find the closest diameter for your cutting application on the chart.
3. Select the type of cut and # Flutes to fi nd your Ft Range.
Alpha
Code
Type of
Cut 0.078 1/8 5/32 3/16 1/4 5/16 13/32 1/2 9/16 5/8 11/16 3/4 7/8 1” 1.1/4 1.1/2
Ľ 0,5D
ļ D
A
B
C
D
E
F
Ľ D
ļ 0,8D
G
H
I
J
K
L
Ľ 1,5D
ļ 0,25D
M
N
O
P
Q
R
Ľ 1,5D
ļ 0,1D
S
T
U
V
X
Y
0.0003 0.0005 0.0007 0.0009 0.0011 0.0017 0.0024 0.0028 0.0033 0.0038 0.0038 0.0038 0.0039 0.0041 0.0042 0.0043
0.0003 0.0005 0.0006 0.0009 0.0010 0.0015 0.0021 0.0026 0.0030 0.0034 0.0034 0.0034 0.0035 0.0037 0.0037 0.0038
0.0003 0.0004 0.0006 0.0007 0.0009 0.0014 0.0019 0.0023 0.0027 0.0031 0.0031 0.0031 0.0031 0.0033 0.0034 0.0034
0.0003 0.0004 0.0006 0.0008 0.0009 0.0015 0.0020 0.0024 0.0028 0.0032 0.0032 0.0032 0.0033 0.0035 0.0038 0.0040
0.0005 0.0007 0.0009 0.0014 0.0017 0.0025 0.0034 0.0041 0.0048 0.0055 0.0056 0.0006 0.0057 0.0060 0.0066 0.0069
0.0004 0.0005 0.0007 0.0008 0.0010 0.0013 0.0016 0.0020 0.0022 0.0025 0.0028 0.0031 0.0031 0.0033 0.0033 0.0033
0.0010 0.0013 0.0014 0.0017 0.0020 0.0022 0.0025 0.0028 0.0028 0.0021 0.0021 0.0022
0.0009 0.0012 0.0013 0.0015 0.0018 0.0020 0.0023 0.0025 0.0021 0.0019 0.0019 0.0020
0.0008 0.0011 0.0011 0.0014 0.0016 0.0018 0.0020 0.0023 0.0023 0.0017 0.0017 0.0018
0.0009 0.0012 0.0013 0.0015 0.0018 0.0020 0.0023 0.0026 0.0026 0.0019 0.0019 0.0020
0.0014 0.0019 0.0026 0.0031 0.0036 0.0059 0.0035 0.0039 0.0038 0.0043 0.0043 0.0046
0.0004 0.0005 0.0007 0.0008 0.0010 0.0011 0.0012 0.0013 0.0013 0.0013 0.0015 0.0017
0.0003 0.0005 0.0007 0.0009 0.0012 0.0016 0.0022 0.0027 0.0031 0.0036 0.0041 0.0045 0.0035 0.0041 0.0038 0.0042
0.0003 0.0004 0.0006 0.0008 0.0011 0.0015 0.0020 0.0024 0.0028 0.0032 0.0037 0.0041 0.0024 0.0037 0.0034 0.0038
0.0002 0.0004 0.0006 0.0007 0.0010 0.0013 0.0018 0.0022 0.0026 0.0029 0.0033 0.0036 0.0029 0.0033 0.0031 0.0034
0.0003 0.0004 0.0006 0.0008 0.0011 0.0014 0.0019 0.0023 0.0027 0.0031 0.0015 0.0039 0.0031 0.0035 0.0033 0.0036
0.0004 0.0006 0.0008 0.0010 0.0015 0.0019 0.0026 0.0031 0.0036 0.0041 0.0035 0.0039 0.0039 0.0044 0.0050 0.0055
0.0005 0.0006 0.0008 0.0010 0.0011 0.0015 0.0019 0.0022 0.0026 0.0029 0.0033 0.0036 0.0036 0.0036 0.0041 0.0043
0.0004 0.0006 0.0009 0.0011 0.0015 0.0020 0.0028 0.0034 0.0039 0.0045 0.0051 0.0056 0.0044 0.0051 0.0048 0.0052
0.0004 0.0006 0.0008 0.0010 0.0014 0.0018 0.0025 0.0030 0.0035 0.0051 0.0046 0.0051 0.0040 0.0046 0.0043 0.0047
0.0003 0.0005 0.0007 0.0009 0.0013 0.0016 0.0023 0.0028 0.0032 0.0036 0.0041 0.0046 0.0036 0.0041 0.0039 0.0043
0.0004 0.0005 0.0008 0.0010 0.0013 0.0017 0.0024 0.0029 0.0034 0.0039 0.0043 0.0048 0.0038 0.0043 0.0041 0.0045
0.0005 0.0007 0.0010 0.0013 0.0018 0.0023 0.0032 0.0039 0.0045 0.0052 0.0044 0.0049 0.0048 0.0055 0.0062 0.0068
0.0006 0.0008 0.0010 0.0012 0.0014 0.0019 0.0023 0.0028 0.0024 0.0036 0.0041 0.0045 0.0045 0.0045 0.0051 0.0054
Feed per Tooth (Ft) Dia Inches
Alpha
Code
Type of
Cut
392
HSS End Mill - Feed Rate Chart
Easy Calculations: (inch) Terms: RPM = Revolutions Per Minute F = Feed Inches Per Minute
RPM = SFM/D x 3.82 F = Ft x T x RPM Ft = Feed Per Tooth T = Number of Teeth D = Cutting Dia.
RPM = [(m/min.) x 1000] ÷ (3.14 x D) SFM = Surface Feet per Minute
www.precisiondormer.com
Easy Calculations: (inch) Terms: RPM = Revolutions Per Minute F = Feed Inches Per Minute
RPM = SFM/D x 3.82 F = Ft x T x RPM Ft = Feed Per Tooth T = Number of Teeth D = Cutting Dia.
RPM = [(m/min.) x 1000] ÷ (3.14 x D) SFM = Surface Feet per Minute
12345681012141618202225283032364050
Ľ 0,5D
ļ D
A 0,004 0,008 0,013 0,017 0,024 0,029 0,043 0,060 0,072 0,084 0,096 0,097 0,096 0,099 0,105 0,109 0,108 0,106 0,108 0,108 0,105
B 0,004 0,007 0,012 0,015 0,022 0,026 0,039 0,054 0,065 0,076 0,086 0,087 0,086 0,089 0,095 0,098 0,097 0,095 0,097 0,097 0,095
C 0,003 0,006 0,011 0,014 0,019 0,023 0,035 0,049 0,058 0,068 0,078 0,079 0,078 0,080 0,085 0,088 0,087 0,086 0,087 0,087 0,085
D 0,004 0,007 0,011 0,014 0,020 0,024 0,037 0,051 0,061 0,071 0,081 0,082 0,081 0,084 0,089 0,099 0,091 0,097 0,091 0,101 0,101
E 0,007 0,012 0,018 0,024 0,035 0,042 0,063 0,087 0,105 0,122 0,140 0,141 0,140 0,144 0,153 0,171 0,157 0,168 0,157 0,175 0,175
F 0,007 0,009 0,013 0,018 0,021 0,025 0,033 0,041 0,050 0,055 0,064 0,072 0,079 0,079 0,085 0,085 0,085 0,085 0,085 0,085 0,085
Ľ D
ļ 0,8D
G 0,026 0,034 0,036 0,043 0,050 0,057 0,064 0,071 0,071 0,054 0,053 0,054 0,053 0,056 0,057 0,060
H 0,023 0,031 0,032 0,039 0,045 0,051 0,058 0,064 0,064 0,049 0,048 0,049 0,048 0,050 0,051 0,054
I 0,021 0,028 0,029 0,035 0,041 0,046 0,052 0,058 0,058 0,044 0,043 0,044 0,043 0,045 0,046 0,049
J 0,024 0,031 0,033 0,039 0,046 0,052 0,059 0,065 0,065 0,049 0,049 0,049 0,049 0,051 0,052 0,055
K 0,035 0,047 0,065 0,079 0,092 0,105 0,088 0,098 0,097 0,110 0,110 0,110 0,110 0,115 0,118 0,123
L 0,010 0,013 0,017 0,020 0,025 0,028 0,030 0,032 0,033 0,034 0,036 0,038 0,039 0,040 0,042 0,042
Ľ 1,5D
ļ 0,25D
M 0,008 0,012 0,018 0,023 0,031 0,041 0,057 0,069 0,080 0,091 0,103 0,114 0,090 0,103 0,085 0,091 0,097 0,110 0,107 0,086
N 0,007 0,011 0,016 0,021 0,028 0,037 0,051 0,062 0,072 0,082 0,093 0,103 0,081 0,093 0,077 0,082 0,087 0,099 0,096 0,077
O 0,006 0,010 0,015 0,019 0,025 0,033 0,046 0,056 0,065 0,074 0,083 0,092 0,073 0,083 0,069 0,074 0,079 0,089 0,087 0,070
P 0,007 0,010 0,016 0,020 0,027 0,035 0,049 0,059 0,069 0,079 0,088 0,098 0,078 0,088 0,073 0,079 0,084 0,094 0,092 0,074
Q 0,009 0,014 0,021 0,026 0,036 0,048 0,066 0,079 0,092 0,106 0,089 0,099 0,098 0,111 0,111 0,119 0,127 0,143 0,139 0,148
R 0,012 0,016 0,020 0,025 0,029 0,038 0,047 0,056 0,065 0,073 0,083 0,092 0,092 0,092 0,092 0,092 0,104 0,104 0,108 0,108
Ľ 1,5D
ļ 0,1D
S 0,010 0,015 0,023 0,029 0,039 0,051 0,071 0,086 0,100 0,114 0,129 0,143 0,113 0,129 0,107 0,114 0,122 0,137 0,133 0,107
T 0,009 0,014 0,021 0,026 0,035 0,046 0,064 0,077 0,090 0,103 0,116 0,129 0,102 0,116 0,096 0,103 0,110 0,123 0,120 0,096
U 0,008 0,012 0,019 0,023 0,032 0,041 0,058 0,070 0,081 0,092 0,104 0,116 0,092 0,104 0,087 0,092 0,099 0,111 0,108 0,087
V 0,009 0,013 0,020 0,025 0,033 0,044 0,061 0,074 0,086 0,098 0,110 0,123 0,097 0,110 0,092 0,098 0,105 0,118 0,115 0,092
X 0,012 0,017 0,026 0,033 0,045 0,059 0,082 0,099 0,115 0,132 0,111 0,124 0,122 0,139 0,139 0,148 0,158 0,178 0,173 0,186
Y 0,015 0,020 0,025 0,031 0,036 0,047 0,059 0,070 0,081 0,092 0,104 0,115 0,115 0,115 0,115 0,115 0,130 0,130 0,136 0,136
Alpha
Code
Type of
Cut
Feed per Tooth (Ft) Dia MM
393
HSS End Mill - Feed Rate Chart
How To Use This Chart to Find Cutting Feed Rate (IPR):
1. Find your Alpha Code on the AMG Chart (example: 279 U : U is the Alpha Code).
2. Find the closest diameter for your cutting application on the chart.
3. Select the type of cut and # Flutes to fi nd your Ft Range.
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
HSS End Mills
HSS End Mills
Helix
Angle
Slotting,
Ramping
Slotting,
Ramping,
Diving
Finishing
Corner
Rounding
Slotting Ball Nose Roughing Finishing
Straight
Shank
Weldon
Shank
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Type of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 289 B
289 = SFM
B = Alpha Code to find your Feed Rate
To calculate Feed Per Tooth, refer to chart on page 392-393.
Page # for easy reference
Style:
Flutes:
Finish/Coating:
Axial Direction:
Type of Cut:
Tool Length:
Shank:
Material:
Tolerance:
Helix Angle:
End Grind:
Icon Guide for HSS End Mills
Standard:
394
1
1
2
2
3
3
4
4
2
2
1
1
3
3
Ŷ = Excellent for Application
Ɣ = Good for Application
www.precisiondormer.com
9002 TN9002 TC9002
Multi-
Flute Multi-
Flute Multi-
Flute
400 400 401
Ɣ164G Ɣ197G Ɣ197G
Ŷ131G Ŷ157G Ŷ184G
Ŷ115H Ŷ138H Ŷ161H
Ɣ98H Ɣ118H Ɣ138H
Ɣ75L Ɣ92L Ɣ105L
Ɣ92G Ɣ112G Ɣ128G
Ɣ75G Ɣ92G Ɣ105G
Ɣ131H Ɣ157H Ɣ184H
Ɣ82H Ɣ98H Ɣ128H
Ɣ92J Ɣ112J Ɣ128J
Ɣ75J Ɣ92J Ɣ105J
Ɣ157J Ɣ187J Ɣ220J
Ɣ43I Ɣ49I Ɣ59I
Ɣ410I Ɣ492I Ɣ574I
Ŷ410I Ŷ492I Ŷ574I
Ŷ410I Ŷ492I Ŷ574I
Ɣ984K Ɣ1181K Ɣ1378K
Ɣ295K Ɣ354K Ɣ413K
Ɣ410I Ɣ492I Ɣ574I
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
HSS End Mills
395
HSS End Mills (con‘t)
www.precisiondormer.com
9008 TN9008 TC9008 9003 TN9003 TC9003 9009 TN9009 TC9009 9004 963
Multi-
Flute Multi-
Flute Multi-
Flute Multi-
Flute Multi-
Flute Multi-
Flute Multi-
Flute Multi-
Flute Multi-
Flute Multi-
Flute 2-Flute
402 402 403 403 404 404 405 405 406 406 407
Ɣ148G Ɣ197G Ɣ197G Ɣ164G Ɣ197G Ɣ197G Ɣ148G Ɣ197G Ɣ197G Ɣ164G Ŷ164A
Ŷ118G Ŷ157G Ŷ184G Ŷ131G Ŷ157G Ŷ184G Ŷ118G Ŷ157G Ŷ184G Ŷ131G Ŷ131A
Ŷ102H Ŷ138H Ŷ161H Ŷ115H Ŷ138H Ŷ161H Ŷ102H Ŷ138H Ŷ161H Ŷ115H Ɣ115B
Ɣ89H Ɣ118H Ɣ138H Ɣ98H Ɣ118H Ɣ138H Ɣ89H Ɣ118H Ɣ138H Ɣ98H Ɣ98B
Ɣ82G Ɣ112G Ɣ128G Ɣ92G Ɣ112G Ɣ128G Ɣ82G Ɣ112G Ɣ128G Ɣ92G Ɣ92A
Ɣ66G Ɣ92G Ɣ105G Ɣ75G Ɣ92G Ɣ105G Ɣ66G Ɣ92G Ɣ105G Ɣ75G Ɣ75A
Ɣ118H Ɣ157H Ɣ184H Ɣ131H Ɣ157H Ɣ184H Ɣ118H Ɣ157H Ɣ184H Ɣ131H Ɣ131B
Ɣ72H Ɣ98H Ɣ128H Ɣ82H Ɣ98H Ɣ128H Ɣ72H Ɣ98H Ɣ128H Ɣ82H Ɣ82B
Ɣ82J Ɣ112J Ɣ128J Ɣ92J Ɣ112J Ɣ128J Ɣ82J Ɣ112J Ɣ128J Ɣ92J Ɣ92D
Ɣ66J Ɣ92J Ɣ105J Ɣ75J Ɣ92J Ɣ105J Ɣ66J Ɣ92J Ɣ105J Ɣ75J Ɣ75D
Ɣ141J Ɣ187J Ɣ220J Ɣ157J Ɣ187J Ɣ220J Ɣ141J Ɣ187J Ɣ220J Ɣ157J Ŷ157D
Ɣ36I Ɣ49I Ɣ59I Ɣ43I Ɣ49I Ɣ59I Ɣ36I Ɣ49I Ɣ59I Ɣ43I Ɣ43C
Ɣ367I Ɣ492I Ɣ574I Ɣ410I Ɣ492I Ɣ574I Ɣ367I Ɣ492I Ɣ574I Ɣ410I Ŷ410C
Ŷ367I Ŷ492I Ŷ574I Ŷ410I Ŷ492I Ŷ574I Ŷ367I Ŷ492I Ŷ574I Ŷ410I Ŷ410C
Ŷ367I Ŷ492I Ŷ574I Ŷ410I Ŷ492I Ŷ574I Ŷ367I Ŷ492I Ŷ574I Ŷ410I Ŷ410C
Ɣ984E
Ɣ886K Ɣ1181K Ɣ1378K Ɣ984K Ɣ1181K Ɣ1378K Ɣ886K Ɣ1181K Ɣ1378K Ɣ984K Ɣ984E
Ɣ266K Ɣ354K Ɣ413K Ɣ295K Ɣ354K Ɣ413K Ɣ266K Ɣ354K Ɣ413K Ɣ295K Ɣ295E
Ɣ367I Ɣ492I Ɣ574I Ɣ410I Ɣ492I Ɣ574I Ɣ367I Ɣ492I Ɣ574I Ɣ410I Ɣ410C
960 961 962
Multi-
Flute Multi-
Flute 4-Flute
407 408 408
Ŷ164S Ŷ148S Ŷ148S
Ŷ131S Ŷ118S Ŷ118S
Ŷ115T Ŷ102T Ŷ102T
Ɣ98T Ɣ89T Ɣ89T
Ɣ75Y Ɣ66Y Ɣ66Y
Ɣ92S Ɣ82S Ɣ82S
Ɣ75S Ɣ66S Ɣ66S
Ɣ131T Ɣ118T Ɣ118T
Ɣ82T Ɣ72T Ɣ72T
Ŷ92V Ŷ82V Ŷ82V
Ɣ75V Ɣ66V Ɣ66V
Ŷ157V Ŷ141V Ŷ141V
Ɣ43U Ɣ36U Ɣ36U
Ŷ410U Ŷ367U Ŷ367U
Ŷ410U Ŷ367U Ŷ367U
Ŷ410U Ŷ367U Ŷ367U
Ɣ984X Ɣ886X Ɣ886X
Ɣ984X Ɣ886X Ɣ886X
Ɣ295X Ɣ266X Ɣ266X
Ɣ410U Ɣ367U Ɣ367U
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
HSS End Mills
HSS End Mills
Helix
Angle
Slotting,
Ramping
Slotting,
Ramping,
Diving
Finishing
Corner
Rounding
Slotting Ball Nose Roughing Finishing
Straight
Shank
Weldon
Shank
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Type of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 289 B
289 = SFM
B = Alpha Code to find your Feed Rate
To calculate Feed Per Tooth, refer to chart on page 392-393.
Page # for easy reference
Style:
Flutes:
Finish/Coating:
Axial Direction:
Type of Cut:
Tool Length:
Shank:
Material:
Tolerance:
Helix Angle:
End Grind:
Icon Guide for HSS End Mills
Standard:
396
1
1
2
2
3
3
4
4
2
2
1
1
3
3
Ŷ = Excellent for Application
Ɣ = Good for Application
www.precisiondormer.com
920
2-Flute
409
Ŷ98A
Ŷ89A
Ɣ75B
Ɣ82A
Ɣ66A
Ɣ82B
Ɣ59D
Ɣ49D
Ɣ98D
Ɣ20C
Ɣ180C
Ɣ197C
Ɣ197C
Ɣ197E
Ɣ180E
Ɣ115E
Ɣ197C
920K TN920
2-Flute 2-Flute
410 411
Ŷ98A Ŷ118A
Ŷ89A Ŷ105A
Ɣ75B Ɣ89B
Ɣ82A Ɣ98A
Ɣ66A Ɣ79A
Ɣ82B Ɣ98B
Ɣ59D Ɣ72D
Ɣ49D Ɣ59D
Ɣ98D Ɣ118D
Ɣ20C Ɣ23C
Ɣ180C Ɣ216C
Ɣ197C Ɣ236C
Ɣ197C Ɣ236C
Ɣ197E Ɣ236E
Ɣ180E Ɣ216E
Ɣ115E Ɣ138E
Ɣ197C Ɣ236C
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
HSS End Mills
397
HSS End Mills (con‘t)
www.precisiondormer.com
905 921 TN921 922 980 981 982 923 TN923 907 930 931
2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 2-Flute 3-Flute 3-Flute
412 412 413 413 414 414 415 415 416 416 417 418
Ŷ112S Ŷ98A Ŷ118A Ŷ98A Ŷ164A Ŷ148A Ŷ148A Ŷ98A Ŷ118A Ŷ112S Ɣ164A
Ŷ89S Ŷ89A Ŷ105A Ŷ89A Ɣ131A Ɣ118A Ɣ118A Ŷ89A Ŷ105A Ŷ89S Ɣ131A Ŷ131A
Ɣ79T Ɣ75B Ɣ89B Ɣ75B Ɣ115B Ɣ102B Ɣ102B Ɣ75B Ɣ89B Ɣ79T Ŷ115B Ŷ115B
Ɣ98B Ɣ98B
Ɣ66C
Ɣ75F Ɣ66F Ɣ66F Ɣ75F
Ɣ62F Ɣ56F Ɣ56F Ɣ62F
Ɣ89S Ɣ82A Ɣ98A Ɣ82A Ɣ82A Ɣ98A Ɣ89S Ɣ92A
Ɣ72S Ɣ66A Ɣ79A Ɣ66A Ɣ66A Ɣ79A Ɣ72S Ɣ75A Ɣ75A
Ɣ89T Ɣ82B Ɣ98B Ɣ82B Ɣ82B Ɣ98B Ɣ89T Ɣ131B Ɣ131B
Ɣ82B Ɣ82B
Ɣ62V Ɣ59D Ɣ72D Ɣ59D Ɣ92D Ɣ82D Ɣ82D Ɣ59D Ɣ72D Ɣ62V Ɣ92D Ŷ92D
Ɣ49V Ɣ49D Ɣ59D Ɣ49D Ɣ49D Ɣ59D Ɣ49V Ŷ75D Ɣ75D
Ɣ33D
Ɣ108V Ɣ98D Ɣ118D Ɣ98D Ɣ157D Ɣ141D Ɣ141D Ɣ98D Ɣ118D Ɣ108V Ŷ157D
Ɣ20U Ɣ20C Ɣ23C Ɣ20C Ɣ20C Ɣ23C Ɣ20U Ŷ43C Ɣ43C
Ɣ20D
Ɣ200U Ɣ180C Ɣ216C Ɣ180C Ŷ410C Ŷ367C Ŷ367C Ɣ180C Ɣ216C Ɣ200U Ŷ410C
Ɣ223U Ɣ197C Ɣ236C Ɣ197C Ɣ197C Ɣ236C Ɣ223U Ŷ410C Ŷ410C
Ɣ223U Ɣ197C Ɣ236C Ɣ197C Ɣ197C Ɣ236C Ɣ223U Ŷ410C Ŷ410C
Ŷ49C
Ɣ243X Ɣ197E Ɣ236E Ɣ197E Ŷ984E Ŷ886E Ŷ886E Ɣ197E Ɣ236E Ɣ243X
Ɣ194X Ɣ180E Ɣ216E Ɣ180E Ŷ984E Ŷ886E Ŷ886E Ɣ180E Ɣ216E Ɣ194X Ɣ984E
Ɣ144X Ɣ115E Ɣ138E Ɣ115E Ŷ295E Ŷ266E Ŷ266E Ɣ115E Ɣ138E Ɣ144X Ɣ295E Ɣ295E
Ɣ197A
Ɣ200U Ɣ197C Ɣ236C Ɣ197C Ɣ410C Ɣ367C Ɣ367C Ɣ197C Ɣ236C Ɣ200U Ɣ410C
Ɣ410C
933
3-Flute
418
Ɣ131A
Ŷ115B
Ɣ98B
Ɣ66C
Ɣ62F
Ɣ75A
Ɣ131B
Ɣ82B
Ɣ92D
Ŷ75D
Ɣ33D
Ŷ43C
Ɣ20D
Ŷ410C
Ŷ410C
Ŷ49C
Ɣ295E
Ɣ197A
Ɣ410C
940 TN940
Multi-
Flute Multi-
Flute
419 420
Ŷ115S Ŷ138S
Ŷ92S Ŷ112S
Ŷ79T Ŷ95T
Ɣ69T Ɣ82T
Ɣ52Y Ɣ62Y
Ɣ92S Ɣ112S
Ɣ75S Ɣ92S
Ɣ92T Ɣ112T
Ɣ56T Ɣ66T
Ŷ62V Ŷ75V
Ɣ52V Ɣ62V
Ŷ108V Ŷ131V
Ɣ20U Ɣ23U
Ŷ203U Ŷ243U
Ŷ223U Ŷ269U
Ŷ223U Ŷ269U
Ɣ197X Ɣ236X
Ɣ148X Ɣ177X
Ɣ203U Ɣ243U
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
HSS End Mills
HSS End Mills
Helix
Angle
Slotting,
Ramping
Slotting,
Ramping,
Diving
Finishing
Corner
Rounding
Slotting Ball Nose Roughing Finishing
Straight
Shank
Weldon
Shank
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd Type of Cut and other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
example: 289 B
289 = SFM
B = Alpha Code to find your Feed Rate
To calculate Feed Per Tooth, refer to chart on page 392-393.
Page # for easy reference
Style:
Flutes:
Finish/Coating:
Axial Direction:
Type of Cut:
Tool Length:
Shank:
Material:
Tolerance:
Helix Angle:
End Grind:
Icon Guide for HSS End Mills
Standard:
398
1
1
2
2
3
3
4
4
2
2
1
1
3
3
Ŷ = Excellent for Application
Ɣ = Good for Application
www.precisiondormer.com
941
Multi-
Flute
421
Ŷ148S
Ŷ118S
Ŷ102T
Ɣ89T
Ɣ66Y
Ɣ82S
Ɣ66S
Ɣ118T
Ɣ72T
Ŷ82V
Ɣ66V
Ŷ141V
Ɣ36U
Ŷ367U
Ŷ367U
Ŷ367U
Ɣ886X
Ɣ886X
Ɣ266X
Ɣ367U
944
Multi-
Flute
421
Ŷ148S
Ŷ118S
Ŷ102T
Ɣ89T
Ɣ66Y
Ɣ82S
Ɣ66S
Ɣ118T
Ɣ72T
Ŷ82V
Ɣ66V
Ŷ141V
Ɣ36U
Ŷ367U
Ŷ367U
Ŷ367U
Ɣ886X
Ɣ886X
Ɣ266X
Ɣ367U
945, 900
4-Flute
422-423
Ŷ164S
Ŷ131S
Ŷ115T
Ɣ98T
Ɣ75Y
Ɣ92S
Ɣ75S
Ɣ131T
Ɣ82T
Ŷ92V
Ɣ75V
Ŷ157V
Ɣ43U
Ŷ410U
Ŷ410U
Ŷ410U
Ɣ984X
Ɣ984X
Ɣ295X
Ɣ410U
TN945
4-Flute
422
Ŷ138S
Ŷ112S
Ŷ95T
Ɣ82T
Ɣ62Y
Ɣ112S
Ɣ92S
Ɣ112T
Ɣ66T
Ŷ75V
Ɣ62V
Ŷ131V
Ɣ23U
Ŷ243U
Ŷ269U
Ŷ269U
Ɣ236X
Ɣ177X
Ɣ243U
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
HSS End Mills
399
HSS End Mills (con‘t)
www.precisiondormer.com
C191 C192 C291 C292 C391 C392
2-Flute 2-Flute Multi-
Flute Multi-
Flute 3-Flute 3-Flute
430 432 433 435 436 436
Ŷ154A Ŷ138A Ŷ138S Ŷ125S Ɣ138A Ɣ125A
Ŷ121A Ŷ112A Ŷ112S Ŷ98S Ŷ112A Ŷ98A
Ɣ105B Ɣ95B Ŷ95T Ŷ85T Ŷ95B Ŷ85B
Ɣ92B Ɣ82B Ɣ82T Ɣ75T Ɣ82B Ɣ75B
Ɣ69F Ɣ62F Ɣ62Y Ɣ56Y Ɣ62F Ɣ56F
Ɣ69A Ɣ75A Ɣ75S Ɣ69S Ɣ75A Ɣ69A
Ɣ69A Ɣ62A Ɣ62S Ɣ56S Ɣ62A Ɣ56A
Ɣ121B Ɣ112B Ɣ112T Ɣ98T Ɣ112B Ɣ98B
Ɣ75B Ɣ69B Ɣ69T Ɣ62T Ɣ69B Ɣ62B
Ŷ85D Ŷ75D Ŷ75V Ŷ69V Ŷ75D Ŷ69D
Ɣ69C Ɣ62D Ɣ62V Ɣ56V Ɣ62D Ɣ56D
Ŷ148D Ŷ134D Ŷ134V Ŷ118V Ŷ134D Ŷ118D
Ɣ39C Ɣ36C Ɣ36U Ɣ33U Ɣ36C Ɣ33C
Ŷ384C Ŷ348C Ŷ348U Ŷ315U Ŷ348C Ŷ315C
Ŷ384C Ŷ348C Ŷ348U Ŷ315U Ŷ348C Ŷ315C
Ŷ384C Ŷ348C Ŷ348U Ŷ315U Ŷ348C Ŷ315C
Ɣ925E Ɣ840E
Ɣ925E Ɣ840E Ɣ840X Ɣ754X Ɣ840E Ɣ754E
Ɣ276E Ɣ249E Ɣ249X Ɣ226X Ɣ249E Ɣ226E
Ɣ385C Ɣ348C Ɣ348U Ɣ315U Ɣ348C Ɣ315C
883
Corner
Rounding
429
Ŷ66p
Ŷ66p
Ŷ52p
Ŷ46p
Ɣ33p
Ɣ26p
Ŷ43P
Ŷ30P
Ɣ20R
Ɣ16R
Ŷ59R
Ŷ49R
Ŷ52R
Ŷ33R
Ŷ52N
Ŷ36O
Ɣ20O
Ŷ66P
Ŷ13O
Ɣ7M
Ŷ131P
Ŷ148P
Ŷ148P
Ɣ16M
Ŷ180R
Ŷ134R
Ŷ85R
Ŷ56R
Ɣ56R
946 TN946 901 947 943 TN943 948 TN948 911 917 919
4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 4-Flute 2-Flute
Mini 4-Flute
Mini 4-Flute
Mini
423 424 424 425 425 426 427 427 428 428 429
Ŷ98A Ŷ138S Ŷ148S Ŷ98A Ŷ115S Ŷ138S Ŷ115S Ŷ138S Ŷ98A Ŷ98A Ŷ98A
Ŷ89A Ŷ112S Ŷ118S Ŷ89A Ŷ92S Ŷ112S Ŷ92S Ŷ112S Ŷ89A Ŷ89A Ŷ89A
Ɣ75B Ŷ95T Ŷ102T Ɣ75B Ŷ79T Ŷ95T Ŷ79T Ŷ95T Ɣ75B Ɣ75B Ɣ75B
Ɣ82T Ɣ89T Ɣ69T Ɣ82T Ɣ69T Ɣ82T
Ɣ62Y Ɣ66Y Ɣ52Y Ɣ62Y Ɣ52Y Ɣ62Y
Ɣ82A Ɣ112S Ɣ82S Ɣ82A Ɣ92S Ɣ112S Ɣ92S Ɣ112S Ɣ82A Ɣ82A Ɣ82A
Ɣ66A Ɣ92S Ɣ66S Ɣ66A Ɣ75S Ɣ92S Ɣ75S Ɣ92S Ɣ66A Ɣ66A Ɣ66A
Ɣ82B Ɣ112T Ɣ118T Ɣ82B Ɣ92T Ɣ112T Ɣ92T Ɣ112T Ɣ82B Ɣ82B Ɣ82B
Ɣ66T Ɣ72T Ɣ56T Ɣ66T Ɣ56T Ɣ66T
Ɣ59D Ŷ75V Ŷ82V Ɣ59D Ŷ62V Ŷ75V Ŷ62V Ŷ75V Ɣ59D Ɣ59D Ɣ59D
Ɣ49D Ɣ62V Ɣ66V Ɣ49D Ɣ52V Ɣ62V Ɣ52V Ɣ62V Ɣ49D Ɣ49D Ɣ49D
Ɣ98D Ŷ131V Ŷ141V Ɣ98D Ŷ108V Ŷ131V Ŷ108V Ŷ131V Ɣ98D Ɣ98D Ɣ98D
Ɣ20C Ɣ23U Ɣ36U Ɣ20C Ɣ20U Ɣ23U Ɣ20U Ɣ23U Ɣ20C Ɣ20C Ɣ20C
Ɣ180C Ŷ243U Ŷ367U Ɣ180C Ŷ203U Ŷ243U Ŷ203U Ŷ243U Ɣ180C Ɣ180C Ɣ180C
Ɣ197C Ŷ269U Ŷ367U Ɣ197C Ŷ223U Ŷ269U Ŷ223U Ŷ269U Ɣ197C Ɣ197C Ɣ197C
Ɣ197C Ŷ269U Ŷ367U Ɣ197C Ŷ223U Ŷ269U Ŷ223U Ŷ269U Ɣ197C Ɣ197C Ɣ197C
Ɣ886X Ɣ197E Ɣ197E
Ɣ180E Ɣ236X Ɣ886X Ɣ180E Ɣ197X Ɣ236X Ɣ197X Ɣ236X Ɣ180E Ɣ180E Ɣ180E
Ɣ115E Ɣ177X Ɣ266X Ɣ115E Ɣ148X Ɣ177X Ɣ148X Ɣ177X Ɣ115E Ɣ115E Ɣ115E
Ɣ197C Ɣ243U Ɣ367U Ɣ197C Ɣ203U Ɣ243U Ɣ203U Ɣ243U Ɣ197C Ɣ197C Ɣ197C
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Surface Feet per Minute (SFM) Surface Feet per Minute (SFM)
Slot
Drill
Slot
Drill
Slot
Drill
Slot
Drill
Threaded Shank End Mills
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
400
9002 - TN9002
9002
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 5/8 2.7/16 3/8 4 5210014
5/16 0.3125 3/4 2.1/2 3/8 4 5210015
3/8 0.3750 3/4 2.1/2 3/8 4 5210016
7/16 0.4375 1.1/4 3.1/4 1/2 4 5210017
1/2 0.5000 1.1/4 3.1/4 1/2 4 5210018
9/16 0.5625 1.3/8 3.3/8 1/2 4 5210019
5/8 0.6250 1.5/8 3.3/4 5/8 4 5210020
3/4 0.7500 1.5/8 3.7/8 3/4 4 5210021
7/8 0.8750 1.7/8 4.1/8 3/4 5 5210022
1“ 1.0000 2“ 4.1/2 1“ 5 5210023
1.1/4 1.2500 2“ 4.1/2 1.1/4 6 5210024
1.1/2 1.5000 2“ 4.1/2 1.1/4 6 5210025
1.3/4 1.7500 2“ 4.1/2 1.1/4 6 5210026
2“ 2.0000 2“ 4.1/2 1.1/4 8 5210027
TN9002
ŶƔ
d1
Ø
inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
inch # Flutes EDP # or
e-Code
1/4 0.2500 5/8 2.7/16 3/8 4 5260014
5/16 0.3125 3/4 2.1/2 3/8 4 5260015
3/8 0.3750 3/4 2.1/2 3/8 4 5260016
7/16 0.4375 1.1/4 3.1/4 1/2 4 5260017
1/2 0.5000 1.1/4 3.1/4 1/2 4 5260018
9/16 0.5625 1.3/8 3.3/8 1/2 4 5260019
5/8 0.6250 1.5/8 3.3/4 5/8 4 5260020
3/4 0.7500 1.5/8 3.7/8 3/4 4 5260021
7/8 0.8750 1.7/8 4.1/8 3/4 5 5260022
1“ 1.0000 2“ 4.1/2 1“ 5 5260023
1.1/4 1.2500 2“ 4.1/2 1.1/4 6 5260024
1.1/2 1.5000 2“ 4.1/2 1.1/4 6 5260025
1.3/4 1.7500 2“ 4.1/2 1.1/4 6 5260026
2“ 2.0000 2“ 4.1/2 1.1/4 8 5260027
ƔEnd Mill Ɣ Fraises d’ébauche ƔFresas Gran Desbaste
ƔRougher
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 401
TC9002
TC9002
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 5/8 2.7/16 3/8 4 5270014
5/16 0.3125 3/4 2.1/2 3/8 4 5270015
3/8 0.3750 3/4 2.1/2 3/8 4 5270016
7/16 0.4375 1.1/4 3.1/4 1/2 4 5270017
1/2 0.5000 1.1/4 3.1/4 1/2 4 5270018
9/16 0.5625 1.3/8 3.3/8 1/2 4 5270019
5/8 0.6250 1.5/8 3.3/4 5/8 4 5270020
3/4 0.7500 1.5/8 3.7/8 3/4 4 5270021
7/8 0.8750 1.7/8 4.1/8 3/4 5 5270022
1“ 1.0000 2“ 4.1/2 1“ 5 5270023
1.1/4 1.2500 2“ 4.1/2 1.1/4 6 5270024
1.1/2 1.5000 2“ 4.1/2 1.1/4 6 5270025
1.3/4 1.7500 2“ 4.1/2 1.1/4 6 5270026
2“ 2.0000 2“ 4.1/2 1.1/4 8 5270027
ƔEnd Mill Ɣ Fraises d’ébauche ƔFresas Gran Desbaste
ƔRougher
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
402
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.1/4 3.1/8 3/8 4 5260078
3/8 0.3750 1.1/2 3.1/4 3/8 4 5260079
1/2 0.5000 2“ 4“ 1/2 4 5260080
5/8 0.6250 2.1/2 4.5/8 5/8 4 5260081
3/4 0.7500 3“ 5.1/4 3/4 4 5260082
7/8 0.8750 3.1/2 5.3/4 3/4 6 5260083
1“ 1.0000 4“ 6.1/2 1“ 5 5260084
1.1/4 1.2500 4“ 6.1/2 1.1/4 6 5260085
1.1/2 1.5000 4“ 6.1/2 1.1/4 6 5260086
1.3/4 1.7500 4“ 6.1/2 1.1/4 6 5260087
2“ 2.0000 4“ 6.1/2 1.1/4 8 5260088
TN9008
9008 - TN9008
9008
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.1/4 3.1/8 3/8 4 5210078
3/8 0.3750 1.1/2 3.1/4 3/8 4 5210079
1/2 0.5000 2“ 4“ 1/2 4 5210080
5/8 0.6250 2.1/2 4.5/8 5/8 4 5210081
3/4 0.7500 3“ 5.1/4 3/4 4 5210082
7/8 0.8750 3.1/2 5.3/4 3/4 6 5210083
1“ 1.0000 4“ 6.1/2 1“ 5 5210084
1.1/4 1.2500 4“ 6.1/2 1.1/4 6 5210085
1.1/2 1.5000 4“ 6.1/2 1.1/4 6 5210086
1.3/4 1.7500 4“ 6.1/2 1.1/4 6 5210087
2“ 2.0000 4“ 6.1/2 1.1/4 8 5210088
ƔEnd Mill Ɣ Fraises d’ébauche ƔFresas Gran Desbaste
ƔRougher, fi ne profi le
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 403
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
l2
Inch
l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 5/8 2.7/16 3/8 4 5210028
5/16 0.3125 3/4 2.1/2 3/8 4 5210029
3/8 0.3750 3/4 2.1/2 3/8 4 5210030
7/16 0.4375 1.1/4 3.1/4 1/2 4 5210031
1/2 0.5000 1.1/4 3.1/4 1/2 4 5210032
9/16 0.5625 1.3/8 3.3/8 1/2 4 5210033
5/8 0.6250 1.5/8 3.3/4 5/8 4 5210034
3/4 0.7500 1.5/8 3.7/8 3/4 4 5210035
7/8 0.8750 1.7/8 4.1/8 3/4 5 5210036
1“ 1.0000 2“ 4.1/2 1“ 5 5210037
1.1/4 1.2500 2“ 4.1/2 1.1/4 6 5210038
1.1/2 1.5000 2“ 4.1/2 1.1/4 6 5210039
1.3/4 1.7500 2“ 4.1/2 1.1/4 6 5210040
2“ 2.0000 2“ 4.1/2 1.1/4 8 5210041
TC9008 - 9003
9003
TC9008
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.1/4 3.1/8 3/8 4 5270078
3/8 0.3750 1.1/2 3.1/4 3/8 4 5270079
1/2 0.5000 2“ 4“ 1/2 4 5270080
5/8 0.6250 2.1/2 4.5/8 5/8 4 5270081
3/4 0.7500 3“ 5.1/4 3/4 4 5270082
7/8 0.8750 3.1/2 5.3/4 3/4 6 5270083
1“ 1.0000 4“ 6.1/2 1“ 5 5270084
1.1/4 1.2500 4“ 6.1/2 1.1/4 6 5270085
1.1/2 1.5000 4“ 6.1/2 1.1/4 6 5270086
1.3/4 1.7500 4“ 6.1/2 1.1/4 6 5270087
2“ 2.0000 4“ 6.1/2 1.1/4 8 5270088
Ɣ Fraises d’ébaucheƔEnd Mill ƔFresas Gran Desbaste
ƔRougher, fi ne profi le
ƔLong length
ƔRougher, coarse profi le
Ɣ Regular length
Ɣ Fraises d’ébaucheƔEnd Mill ƔFresas Gran Desbaste
9003
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
404
TN9003 - TC9003
TC9003
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 5/8 2.7/16 3/8 4 5270028
5/16 0.3125 3/4 2.1/2 3/8 4 5270029
3/8 0.3750 3/4 2.1/2 3/8 4 5270030
7/16 0.4375 1.1/4 3.1/4 1/2 4 5270031
1/2 0.5000 1.1/4 3.1/4 1/2 4 5270032
9/16 0.5625 1.3/8 3.3/8 1/2 4 5270033
5/8 0.6250 1.5/8 3.3/4 5/8 4 5270034
3/4 0.7500 1.5/8 3.7/8 3/4 4 5270035
7/8 0.8750 1.7/8 4.1/8 3/4 5 5270036
1“ 1.0000 2“ 4.1/2 1“ 5 5270037
1.1/4 1.2500 2“ 4.1/2 1.1/4 6 5270038
1.1/2 1.5000 2“ 4.1/2 1.1/4 6 5270039
1.3/4 1.7500 2“ 4.1/2 1.1/4 6 5270040
2“ 2.0000 2“ 4.1/2 1.1/4 8 5270041
TN9003
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 5/8 2.7/16 3/8 4 5260028
5/16 0.3125 3/4 2.1/2 3/8 4 5260029
3/8 0.3750 3/4 2.1/2 3/8 4 5260030
7/16 0.4375 1.1/4 3.1/4 1/2 4 5260031
1/2 0.5000 1.1/4 3.1/4 1/2 4 5260032
9/16 0.5625 1.3/8 3.3/8 1/2 4 5260033
5/8 0.6250 1.5/8 3.3/4 5/8 4 5260034
3/4 0.7500 1.5/8 3.7/8 3/4 4 5260035
7/8 0.8750 1.7/8 4.1/8 3/4 5 5260036
1“ 1.0000 2“ 4.1/2 1“ 5 5260037
1.1/4 1.2500 2“ 4.1/2 1.1/4 6 5260038
1.1/2 1.5000 2“ 4.1/2 1.1/4 6 5260039
1.3/4 1.7500 2“ 4.1/2 1.1/4 6 5260040
2“ 2.0000 2“ 4.1/2 1.1/4 8 5260041
ƔEnd Mill Ɣ Fraises d’ébauche ƔFresas Gran Desbaste
ƔRougher, coarse profi le
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 405
9009 - TN9009
9009
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.1/4 3.1/8 3/8 4 5210089
3/8 0.3750 1.1/2 3.1/4 3/8 4 5210090
1/2 0.5000 2“ 4“ 1/2 4 5210091
5/8 0.6250 2.1/2 4.5/8 5/8 4 5210092
3/4 0.7500 3“ 5.1/4 3/4 4 5210093
7/8 0.8750 3.1/2 5.3/4 3/4 6 5210094
1“ 1.0000 4“ 6.1/2 1“ 5 5210095
1.1/4 1.2500 4“ 6.1/2 1.1/4 6 5210096
1.1/2 1.5000 4“ 6.1/2 1.1/4 6 5210097
1.3/4 1.7500 4“ 6.1/2 1.1/4 6 5210098
2“ 2.0000 4“ 6.1/2 1.1/4 8 5210099
TN9009
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.1/4 3.1/8 3/8 4 5260089
3/8 0.3750 1.1/2 3.1/4 3/8 4 5260090
1/2 0.5000 2“ 4“ 1/2 4 5260091
5/8 0.6250 2.1/2 4.5/8 5/8 4 5260092
3/4 0.7500 3“ 5.1/4 3/4 4 5260093
7/8 0.8750 3.1/2 5.3/4 3/4 6 5260094
1“ 1.0000 4“ 6.1/2 1“ 5 5260095
1.1/4 1.2500 4“ 6.1/2 1.1/4 6 5260096
1.1/2 1.5000 4“ 6.1/2 1.1/4 6 5260097
1.3/4 1.7500 4“ 6.1/2 1.1/4 6 5260098
2“ 2.0000 4“ 6.1/2 1.1/4 8 5260099
ƔEnd Mill Ɣ Fraises d’ébauche ƔFresas Gran Desbaste
ƔRougher, coarse profi le
ƔLong length
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
406
TC9009
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.1/4 3.1/8 3/8 4 5270089
3/8 0.3750 1.1/2 3.1/4 3/8 4 5270090
1/2 0.5000 2“ 4“ 1/2 4 5270091
5/8 0.6250 2.1/2 4.5/8 5/8 4 5270092
3/4 0.7500 3“ 5.1/4 3/4 4 5270093
7/8 0.8750 3.1/2 5.3/4 3/4 6 5270094
1“ 1.0000 4“ 6.1/2 1“ 5 5270095
1.1/4 1.2500 4“ 6.1/2 1.1/4 6 5270096
1.1/2 1.5000 4“ 6.1/2 1.1/4 6 5270097
1.3/4 1.7500 4“ 6.1/2 1.1/4 6 5270098
2“ 2.0000 4“ 6.1/2 1.1/4 8 5270099
TC9009 - 9004
9004
Ɣ Fraises d’ébauche
ƔEnd Mill Ɣ Fraises d’ébauche ƔFresas Gran Desbaste
ƔRougher, coarse profi le
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 5/8 2.7/16 3/8 3 5210042
3/8 0.3750 3/4 2.1/2 3/8 4 5210043
1/2 0.5000 1.1/4 3.1/4 1/2 4 5210044
5/8 0.6250 1.5/8 3.3/4 5/8 4 5210045
3/4 0.7500 1.5/8 3.7/8 3/4 4 5210046
7/8 0.8750 1.7/8 4.1/8 3/4 5 5210047
1“ 1.0000 2“ 4.1/2 1“ 5 5210048
1.1/4 1.2500 2“ 4.1/2 1.1/4 6 5210049
1.1/2 1.5000 2“ 4.1/2 1.1/4 6 5210050
2“ 2.0000 2“ 4.1/2 1.1/4 6 5210051
ƔEnd Mill ƔFresas Gran Desbaste
Ɣ Truncated, rougher & fi nisher
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 407
963 - 960
963 - 960
960
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
963
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 2.5/16 3/8 2 5110633
3/16 0.1875 7/16 2.3/8 3/8 2 5110634
1/4 0.2500 1/2 2.7/16 3/8 2 5110635
5/16 0.3125 9/16 2.1/2 3/8 2 5110636
3/8 0.3750 9/16 2.1/2 3/8 2 5110637
1/2 0.5000 1“ 3.1/4 1/2 2 5110638
5/8 0.6250 1.5/16 3.3/4 5/8 2 5110639
3/4 0.7500 1.5/16 3.7/8 3/4 2 5110640
1“ 1.0000 1.5/8 4.1/2 1“ 2 5110641
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 2.5/16 3/8 4 5110660
3/16 0.1875 1/2 2.3/8 3/8 4 5110661
1/4 0.2500 5/8 2.7/16 3/8 4 5110662
5/16 0.3125 3/4 2.1/2 3/8 4 5110663
3/8 0.3750 3/4 2.1/2 3/8 4 5110664
1/2 0.5000 1.1/4 3/1/4 1/2 4 5110665
1/2 0.5000 1.1/4 3.1/4 1/2 6 5110772
5/8 0.6250 1.5/8 3.3/4 5/8 6 5110773
5/8 0.6250 1.5/8 3.3/4 5/8 4 5110666
3/4 0.7500 1.5/8 3.7/8 3/4 4 5110667
3/4 0.7500 1.5/8 3.7/8 3/4 6 5110774
1“ 1.0000 2“ 4.1/2 1“ 6 5110778
1“ 1.0000 2“ 4.1/2 1“ 4 5110669
1.1/4 1.2500 2“ 4.1/2 1.1/4 6 5110670
1.1/2 1.5000 2“ 4.1/2 1.1/4 6 5110671
2“ 2.0000 4“ 7.3/4 2“ 6 5110782
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ Multi-fl ute, regular length
Ɣ 2-Flute, Regular Length
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
408
962
Ɣ Fraises de fi nition
961 - 962
961
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
3/8 0.3750 1.1/2 3.1/4 3/8 4 5110672
1/2 0.5000 2“ 4“ 1/2 4 5110673
5/8 0.6250 2.1/2 4.5/8 5/8 4 5110674
3/4 0.7500 3“ 5.1/4 3/4 4 5110675
3/4 0.7500 3“ 5.1/4 3/4 6 5110775
1“ 1.0000 4“ 6.1/2 1“ 6 5110779
1“ 1.0000 4“ 6.1/2 1“ 4 5110677
1.1/4 1.2500 4“ 6.1/2 1.1/4 6 5110678
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
3/8 0.3750 2.1/2 4.1/4 3/8 4 5110679
1/2 0.5000 3“ 5“ 1/2 4 5110680
5/8 0.6250 4“ 6.1/8 5/8 4 5110681
3/4 0.7500 4“ 6.1/4 3/4 4 5110682
1“ 1.0000 6“ 8.1/2 1“ 4 5110684
ƔEnd Mill ƔFresas de acabado
Ɣ4-fl ute, extra length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
ƔMulti-fl ute, long length
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 409
920
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 2.5/16 3/8 2 5110302
3/16 0.1875 7/16 2.3/8 3/8 2 5110303
1/4 0.2500 1/2 2.7/16 3/8 2 5110304
5/16 0.3125 9/16 2.1/2 3/8 2 5110305
3/8 0.3750 9/16 2.1/2 3/8 2 5110306
7/16 0.4375 13/16 2.11/16 3/8 2 5110307
1/2 0.5000 13/16 2.11/16 3/8 2 5110308
1/2 0.5000 1“ 3.1/4 1/2 2 5110309
9/16 0.5625 1.1/8 3.3/8 1/2 2 5110310
5/8 0.6250 1.1/8 3.3/8 1/2 2 5110311
5/8 0.6250 1.5/16 3.3/4 5/8 2 5110314
11/16 0.6875 1.5/16 3.3/4 5/8 2 5110315
11/16 0.6875 1.5/16 3.5/8 1/2 2 5110312
3/4 0.7500 1.5/16 3.5/8 1/2 2 5110313
3/4 0.7500 1.5/16 3.3/4 5/8 2 5110316
3/4 0.7500 1.5/16 3.7/8 3/4 2 5110708
13/16 0.8125 1.1/2 4“ 5/8 2 5110317
7/8 0.8750 1.1/2 4“ 5/8 2 5110318
7/8 0.8750 1.1/2 4.1/8 7/8 2 5110321
7/8 0.8750 1.1/2 4.1/8 3/4 2 5110709
15/16 0.9375 1.1/2 4“ 5/8 2 5110319
1“ 1.0000 1.1/2 4“ 5/8 2 5110320
1“ 1.0000 1.1/2 4.1/8 7/8 2 5110323
1“ 1.0000 1.5/8 4.1/2 1“ 2 5110326
1“ 1.0000 1.1/2 4.1/8 3/4 2 5110710
1.1/8 1.1250 1.5/8 4.1/4 3/4 2 5111714
1.1/8 1.1250 1.5/8 4.1/4 7/8 2 5110324
1.1/8 1.1250 1.5/8 4.1/2 1“ 2 5110327
1.1/4 1.2500 1.5/8 4.1/2 1“ 2 5110328
1.1/4 1.2500 1.5/8 4.1/2 1.1/4 2 5110331
1.1/4 1.2500 1.5/8 4.1/4 7/8 2 5110325
1.1/4 1.2500 1.5/8 4.1/4 3/4 2 5111715
1.3/8 1.3750 1.5/8 4.1/4 3/4 2 5111716
1.3/8 1.3750 1.5/8 4.1/2 1“ 2 5110329
1.1/2 1.5000 1.5/8 4.1/2 1“ 2 5110330
1.1/2 1.5000 1.5/8 4.1/2 1.1/4 2 5110332
1.1/2 1.5000 1.5/8 4.1/4 3/4 2 5111717
1.3/4 1.7500 1.1/2 3.7/8 3/4 2 5111718
1.3/4 1.7500 1.5/8 4.1/2 1.1/4 2 5110334
2“ 2.0000 1.5/8 4.1/2 1.1/4 2 5110336
22.0000 1.1/2 3.7/8 3/4 2 5111719
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ 2-fl ute, regular length
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
410
920K
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 2.5/16 3/8 2 5110715
3/16 0.1875 7/16 2.3/8 3/8 2 5110716
1/4 0.2500 1/2 2.7/16 3/8 2 5110717
5/16 0.3125 9/16 2.1/2 3/8 2 5110718
3/8 0.3750 9/16 2.1/2 3/8 2 5110719
1/2 0.5000 1“ 3.1/4 1/2 2 5110720
5/8 0.6250 1.5/16 3.3/4 5/8 2 5110721
3/4 0.7500 1.5/16 3.7/8 3/4 2 5110722
7/8 0.8750 1.1/2 4.1/8 7/8 2 5110723
1“ 1.0000 1.5/8 4.1/2 1“ 2 5110724
1.1/4 1.2500 1.5/8 4.1/2 1.1/4 2 5110725
1.1/2 1.5000 1.5/8 4.1/2 1.1/4 2 5110726
ƔEnd Mill Ɣ Fraises à rainurer les clavettes ƔFresas de ranurar
Ɣ 2-fl ute, keyway, regular length
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 411
TN920
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 2.5/16 3/8 2 5160302
3/16 0.1875 7/16 2.3/8 3/8 2 5160303
1/4 0.2500 1/2 2.7/16 3/8 2 5160304
5/16 0.3125 9/16 2.1/2 3/8 2 5160305
3/8 0.3750 9/16 2.1/2 3/8 2 5160306
7/16 0.4375 13/16 2.11/16 3/8 2 5160307
1/2 0.5000 13/16 2.11/16 3/8 2 5160308
1/2 0.5000 1“ 3.1/4 1/2 2 5160309
9/16 0.5625 1.1/8 3.3/8 1/2 2 5160310
5/8 0.6250 1.1/8 3.3/8 1/2 2 5160311
5/8 0.6250 1.5/16 3.3/4 5/8 2 5160314
11/16 0.6875 1.5/16 3.3/4 5/8 2 5160315
11/16 0.6875 1.5/16 3.5/8 1/2 2 5160312
3/4 0.7500 1.5/16 3.5/8 1/2 2 5160313
3/4 0.7500 1.5/16 3.3/4 5/8 2 5160316
3/4 0.7500 1.5/16 3.7/8 3/4 2 5160708
13/16 0.8125 1.1/2 4“ 5/8 2 5160317
7/8 0.8750 1.1/2 4“ 5/8 2 5160318
7/8 0.8750 1.1/2 4.1/8 7/8 2 5160321
7/8 0.8750 1.1/2 4.1/8 3/4 2 5160709
15/16 0.9375 1.1/2 4“ 5/8 2 5160319
1“ 1.0000 1.1/2 4“ 5/8 2 5160320
1“ 1.0000 1.1/2 4.1/8 7/8 2 5160323
1“ 1.0000 1.5/8 4.1/2 1“ 2 5160326
1“ 1.0000 1.1/2 4.1/8 3/4 2 5160710
1.1/8 1.1250 1.5/8 4.1/4 3/4 2 5161714
1.1/8 1.1250 1.5/8 4.1/4 7/8 2 5160324
1.1/8 1.1250 1.5/8 4.1/2 1“ 2 5160327
1.1/4 1.2500 1.5/8 4.1/2 1“ 2 5160328
1.1/4 1.2500 1.5/8 4.1/2 1.1/4 2 5160331
1.1/4 1.2500 1.5/8 4.1/4 7/8 2 5160325
1.1/4 1.2500 1.5/8 4.1/4 3/4 2 5161715
1.3/8 1.3750 1.5/8 4.1/4 3/4 2 5161716
1.3/8 1.3750 1.5/8 4.1/2 1“ 2 5160329
Ɣ 2-fl ute, regular length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
1.1/2 1.5000 1.5/8 4.1/4 3/4 2 5161717
1.3/4 1.7500 1.1/2 3.7/8 3/4 2 5161718
1.3/4 1.7500 1.5/8 4.1/2 1.1/4 2 5160334
2“ 2.0000 1.5/8 4.1/2 1.1/4 2 5160336
2“ 2.0000 1.1/2 3.7/8 3/4 2 5161719
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
412
905 - 921
921
905
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 2.5/16 3/8 2 5110390
3/16 0.1875 1/2 2.3/8 3/8 2 5110391
1/4 0.2500 5/8 2.7/16 3/8 2 5110392
5/16 0.3125 3/4 2.1/2 3/8 2 5110393
3/8 0.3750 3/4 2.1/2 3/8 2 5110394
7/16 0.4375 1“ 3.1/4 1/2 2 5110395
1/2 0.5000 1“ 3.1/4 1/2 2 5110396
9/16 0.5625 1.1/8 3.3/8 1/2 2 5110700
5/8 0.6250 1.1/8 3.3/8 1/2 2 5110701
5/8 0.6250 1.3/8 3.3/4 5/8 2 5110397
3/4 0.7500 1.5/8 3.7/8 3/4 2 5110398
3/4 0.7500 1.5/16 3.5/8 1/2 2 5110702
7/8 0.8750 1.7/8 4.1/8 3/4 2 5110703
7/8 0.8750 2“ 4.1/4 7/8 2 5110399
1“ 1.0000 2.1/4 4.3/4 1“ 2 5110400
1“ 1.0000 2.1/4 4.1/2 3/4 2 5110704
1.1/8 1.1250 2.1/4 4.3/4 1“ 2 5110401
1.1/4 1.2500 2.1/2 5“ 1.1/4 2 5110402
1.1/2 1.5000 2.1/2 5“ 1.1/4 2 5110403
Ɣ 2-fl ute, ball nose, regular length
ƔEnd Mill Ɣ Fraises de fi nition bout hémisphérique ƔFresas con punta esferica
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
3/8 0.3750 1.1/2 3.1/4 3/8 2 5110337
1/2 0.5000 1.7/8 4“ 1/2 2 5110338
5/8 0.6250 2“ 4.1/8 5/8 2 5110339
3/4 0.7500 2.1/4 4.1/2 3/4 2 5110340
1“ 1.0000 3“ 5.1/2 1“ 2 5110342
Ɣ 2-fl ute, keyway, long length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 413
TN921 - 922
TN921
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
3/8 0.3750 1.1/2 3.1/4 3/8 2 5160337
1/2 0.5000 1.7/8 4“ 1/2 2 5160338
5/8 0.6250 2“ 4.1/8 5/8 2 5160339
3/4 0.7500 2.1/4 4.1/2 3/4 2 5160340
1“ 1.0000 3“ 5.1/2 1“ 2 5160342
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 5/8 3.1/16 3/8 2 5110352
5/16 0.3125 3/4 3.1/8 3/8 2 5110353
3/8 0.3750 3/4 3.1/4 3/8 2 5110354
1/2 0.5000 1“ 4“ 1/2 2 5110355
5/8 0.6250 1.3/8 4.5/8 5/8 2 5110356
3/4 0.7500 1.5/8 5.1/4 3/4 2 5110357
7/8 0.8750 2“ 6“ 7/8 2 5110358
1“ 1.0000 2.1/2 7.1/4 1“ 2 5110359
1.1/4 1.2500 3“ 7.1/4 1.1/4 2 5110360
Ɣ 2-fl ute, long length
922
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ 2-fl ute, long length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
414
980 - 981
980
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 5/8 2.7/16 3/8 2 5110602
5/16 0.3125 3/4 2.1/2 3/8 2 5110603
3/8 0.3750 3/4 2.1/2 3/8 2 5110604
7/16 0.4375 1“ 2.11/16 3/8 2 5110605
1/2 0.5000 1.1/4 3.1/4 1/2 2 5110606
5/8 0.6250 1.5/8 3.3/4 5/8 2 5110607
3/4 0.7500 1.5/8 3.7/8 3/4 2 5110608
1“ 1.0000 2“ 4.1/2 1“ 2 5110609
Ɣ 2-fl ute, regular length
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.1/4 3.1/16 3/8 2 5110613
5/16 0.3125 1.3/8 3.1/8 3/8 2 5110614
3/8 0.3750 1.1/2 3.1/4 3/8 2 5110615
7/16 0.4375 1.3/4 3.3/4 1/2 2 5110616
1/2 0.5000 2“ 4“ 1/2 2 5110617
5/8 0.6250 2.1/2 4.5/8 5/8 2 5110618
3/4 0.7500 3“ 5.1/4 3/4 2 5110619
1“ 1.0000 4“ 6.1/2 1“ 2 5110620
Ɣ 2-fl ute, long length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
981
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 415
982 - 923
Ɣ Fraises à rainurer
982
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.3/4 3.9/16 3/8 2 5110624
5/16 0.3125 2“ 3.3/4 3/8 2 5110625
3/8 0.3750 2.1/2 4.1/4 3/8 2 5110626
1/2 0.5000 3“ 5“ 1/2 2 5110627
5/8 0.6250 4“ 6.1/8 5/8 2 5110628
3/4 0.7500 4“ 6.1/4 3/4 2 5110629
1“ 1.0000 6“ 8.1/2 1“ 2 5110630
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ 2-fl ute, extra length
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 3.1/16 3/8 2 5110364
5/32 0.1562 7/16 3.1/8 3/8 2 5110365
3/16 0.1875 7/16 3.1/4 3/8 2 5110366
7/32 0.2188 1/2 3.1/4 3/8 2 5110367
1/4 0.2500 1/2 3.3/8 3/8 2 5110368
9/32 0.2812 9/16 3.3/8 3/8 2 5110369
5/16 0.3125 9/16 3.1/2 3/8 2 5110370
11/32 0.3438 9/16 3.1/2 3/8 2 5110371
3/8 0.3750 9/16 3.1/2 3/8 2 5110372
13/32 0.4062 13/16 4.1/8 1/2 2 5110373
7/16 0.4375 13/16 4.1/8 1/2 2 5110374
15/32 0.4688 13/16 4.1/8 1/2 2 5110375
1/2 0.5000 13/16 4.1/8 1/2 2 5110376
9/16 0.5625 1.1/8 5“ 5/8 2 5110377
5/8 0.6250 1.1/8 5“ 5/8 2 5110378
11/16 0.6875 1.5/16 5.5/8 3/4 2 5110379
3/4 0.7500 1.5/16 5.5/8 3/4 2 5110380
13/16 0.8125 1.9/16 6.1/8 7/8 2 5110381
7/8 0.8750 1.9/16 6.1/8 7/8 2 5110382
15/16 0.9375 1.5/8 6.3/8 1“ 2 5110383
1“ 1.0000 1.5/8 6.3/8 1“ 2 5110384
923
Ɣ End Mill ƔFresas Frontales
Ɣ 2-fl ute, regular length
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
416
TN923 - 907
Ɣ Fraises de fi nition bout hémisphérique -
Double
TN923
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 3.1/16 3/8 2 5160364
5/32 0.1562 7/16 3.1/8 3/8 2 5160365
3/16 0.1875 7/16 3.1/4 3/8 2 5160366
7/32 0.2188 1/2 3.1/4 3/8 2 5160367
1/4 0.2500 1/2 3.3/8 3/8 2 5160368
9/32 0.2812 9/16 3.3/8 3/8 2 5160369
5/16 0.3125 9/16 3.1/2 3/8 2 5160370
11/32 0.3438 9/16 3.1/2 3/8 2 5160371
3/8 0.3750 9/16 3.1/2 3/8 2 5160372
13/32 0.4062 13/16 4.1/8 1/2 2 5160373
7/16 0.4375 13/16 4.1/8 1/2 2 5160374
15/32 0.4688 13/16 4.1/8 1/2 2 5160375
1/2 0.5000 13/16 4.1/8 1/2 2 5160376
9/16 0.5625 1.1/8 5“ 5/8 2 5160377
5/8 0.6250 1.1/8 5“ 5/8 2 5160378
11/16 0.6875 1.5/16 5.5/8 3/4 2 5160379
3/4 0.7500 1.5/16 5.5/8 3/4 2 5160380
7/8 0.8750 1.9/16 6.1/8 7/8 2 5160382
1“ 1.0000 1.5/8 6.3/8 1“ 2 5160384
ƔEnd Mill Ɣ Fraises à rainurer ƔFresas Frontales
Ɣ 2-fl ute, regular length
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 3.1/16 3/8 2 5110416
3/16 0.1875 7/16 3.1/4 3/8 2 5110417
1/4 0.2500 1/2 3.3/8 3/8 2 5110418
5/16 0.3125 9/16 3.1/2 3/8 2 5110419
3/8 0.3750 9/16 3.1/2 3/8 2 5110420
7/16 0.4375 13/16 4.1/8 1/2 2 5110421
1/2 0.5000 13/16 4.1/8 1/2 2 5110422
5/8 0.6250 1.1/8 5“ 5/8 2 5110423
3/4 0.7500 1.5/16 5.5/8 3/4 2 5110424
1“ 1.0000 1.5/8 6.3/8 1“ 2 5110426
ƔEnd Mill Ɣ Fresas con punta esferica - Doble fi nal
Ɣ 2-fl ute, ball nose, double end,
regular length
907
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 417
930
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 2.5/16 3/8 3 5110221
3/16 0.1875 1/2 2.3/8 3/8 3 5110222
1/4 0.2500 5/8 2.7/16 3/8 3 5110223
5/16 0.3125 3/4 2.1/2 3/8 3 5110224
3/8 0.3750 3/4 2.1/2 3/8 3 5110225
7/16 0.4375 1“ 2.11/16 3/8 3 5110226
1/2 0.5000 1“ 2.11/16 3/8 3 5110227
1/2 0.5000 1.1/4 3.1/4 1/2 3 5110228
9/16 0.5625 1.3/8 3.3/8 1/2 3 5110229
5/8 0.6250 1.3/8 3.3/8 1/2 3 5110230
5/8 0.6250 1.5/8 3.3/4 5/8 3 5110232
3/4 0.7500 1.5/8 3.5/8 1/2 3 5110231
3/4 0.7500 1.5/8 3.3/4 5/8 3 5110233
3/4 0.7500 1.5/8 3.7/8 3/4 3 5110696
7/8 0.8750 1.7/8 4.1/8 3/4 3 5110697
1“ 1.0000 1.7/8 4.1/8 3/4 3 5110698
1“ 1.0000 1.7/8 4“ 5/8 3 5110235
1“ 1.0000 2“ 4.1/2 1“ 3 5110237
1.1/8 1.1250 2“ 4.1/2 1“ 3 5110238
1.1/4 1.2500 2“ 4.1/2 1“ 3 5110239
1.1/4 1.2500 2“ 4.1/2 1.1/4 3 5110240
1.1/2 1.5000 2“ 4.1/2 1.1/4 3 5110241
1.3/4 1.7500 2“ 4.1/2 1.1/4 3 5110242
2“ 2.0000 2“ 4.1/2 1.1/4 3 5110243
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ 2-fl ute, regular length
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
418
931 - 933
931
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.1/4 3.1/16 3/8 3 5110244
5/16 0.3125 1.3/8 3.1/8 3/8 3 5110245
3/8 0.3750 1.1/2 3.1/4 3/8 3 5110246
7/16 0.4375 1.3/4 3.3/4 1/2 3 5110247
1/2 0.5000 2“ 4“ 1/2 3 5110248
5/8 0.6250 2.1/2 4.5/8 5/8 3 5110249
3/4 0.7500 3“ 5.1/4 3/4 3 5110250
1“ 1.0000 4“ 6.1/2 1“ 3 5110252
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 3.1/16 3/8 3 5110257
3/16 0.1875 1/2 3.1/4 3/8 3 5110258
1/4 0.2500 5/8 3.3/8 3/8 3 5110259
5/16 0.3125 3/4 3.1/2 3/8 3 5110260
3/8 0.3750 3/4 3.1/2 3/8 3 5110261
7/16 0.4375 1“ 4.1/8 1/2 3 5110262
1/2 0.5000 1“ 4.1/8 1/2 3 5110263
9/16 0.5625 1.3/8 5“ 5/8 3 5110264
5/8 0.6250 1.3/8 5“ 5/8 3 5110265
3/4 0.7500 1.5/8 5.5/8 3/4 3 5110266
1“ 1.0000 1.7/8 6.3/8 1“ 3 5110268
933
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ 3-fl ute, long length
Ɣ 3-fl ute, regular length
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 419
940
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l1
Inch l2
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 2.5/16 3/8 3/8 4 5110001
3/16 0.1875 2.3/8 1/2 3/8 4 5110002
1/4 0.2500 2.7/16 5/8 3/8 4 5110003
5/16 0.3125 2.1/2 3/4 3/8 4 5110004
3/8 0.3750 2.1/2 3/4 3/8 4 5110005
7/16 0.4375 2.11/16 1“ 3/8 4 5110006
1/2 0.5000 2.11/16 1“ 3/8 4 5110007
1/2 0.5000 3.1/4 1.1/4 1/2 4 5110008
9/16 0.5625 3.3/8 1.3/8 1/2 4 5110009
5/8 0.6250 3.3/8 1.3/8 1/2 4 5110010
5/8 0.6250 3.3/4 1.5/8 5/8 4 5110013
11/16 0.6875 3.5/8 1.5/8 1/2 4 5110011
11/16 0.6875 3.3/4 1.5/8 5/8 4 5110014
3/4 0.7500 3.5/8 1.5/8 1/2 4 5110012
3/4 0.7500 3.3/4 1.5/8 5/8 4 5110015
3/4 0.7500 3.7/8 1.5/8 3/4 4 5110711
13/16 0.8125 4“ 1.7/8 5/8 6 5110016
7/8 0.8750 4“ 1.7/8 5/8 6 5110017
7/8 0.8750 4.1/8 1.7/8 3/4 4 5110712
7/8 0.8750 4.1/8 1.7/8 7/8 4 5110020
1“ 1“ 4“ 1.7/8 5/8 6 5110019
1“ 1“ 4.1/8 1.7/8 3/4 4 5110713
1“ 1“ 4.1/8 1.7/8 7/8 4 5110022
1“ 1“ 4.1/2 2“ 1“ 4 5110025
1.1/8 1.1250 4“ 1.3/4 3/4 6 5111720
1.1/8 1.1250 4.1/4 2“ 7/8 6 5110023
1.1/8 1.1250 4.1/2 2“ 1“ 6 5110026
1.1/4 1.2500 4“ 1.3/4 3/4 6 5111721
1.1/4 1.2500 4.1/4 2“ 7/8 6 5110024
1.1/4 1.2500 4.1/2 2“ 1“ 6 5110027
1.1/4 1.2500 4.1/2 2“ 1.1/4 6 5110030
1.3/8 1.3750 4.1/4 2“ 3/4 6 5111722
1.3/8 1.3750 4.1/2 2“ 1“ 6 5110028
1.1/2 1.5000 4.1/4 2“ 3/4 6 5111723
1.1/2 1.5000 4.1/2 2“ 1“ 6 5110029
1.1/2
1.3/4
1.5000
1.7500
4.1/2
3.7/8
2“
1.1/2
1.1/4
3/4
6
6
5110031
5111724
1.3/4 1.7500 4.1/2 2“ 1.1/4 6 5110033
2“ 2“ 3.7/8 1.1/2 3/4 8 5111725
2“ 2“ 4.1/2 2“ 1.1/4 8 5110035
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ Multi-fl ute, regular length
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
420
TN940
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l1
Inch l2
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 2.5/16 3/8 3/8 4 5160001
3/16 0.1875 2.3/8 1/2 3/8 4 5160002
1/4 0.2500 2.7/16 5/8 3/8 4 5160003
5/16 0.3125 2.1/2 3/4 3/8 4 5160004
3/8 0.3750 2.1/2 3/4 3/8 4 5160005
7/16 0.4375 2.11/16 1“ 3/8 4 5160006
1/2 0.5000 2.11/16 1“ 3/8 4 5160007
1/2 0.5000 3.1/4 1.1/4 1/2 4 5160008
9/16 0.5625 3.3/8 1.3/8 1/2 4 5160009
5/8 0.6250 3.3/8 1.3/8 1/2 4 5160010
5/8 0.6250 3.3/4 1.5/8 5/8 4 5160013
11/16 0.6875 3.3/4 1.5/8 5/8 4 5160014
11/16 0.6875 3.5/8 1.5/8 1/2 4 5160011
3/4 0.7500 3.5/8 1.5/8 1/2 4 5160012
3/4 0.7500 3.3/4 1.5/8 5/8 4 5160015
3/4 0.7500 3.7/8 1.5/8 3/4 4 5160711
13/16 0.8125 4“ 1.7/8 5/8 6 5160016
7/8 0.8750 4“ 1.7/8 5/8 6 5160017
7/8 0.8750 4.1/8 1.7/8 7/8 4 5160020
7/8 0.8750 4.1/8 1.7/8 3/4 4 5160712
1“ 1“ 4.1/8 1.7/8 3/4 4 5160713
1“ 1“ 4.1/8 1.7/8 7/8 4 5160022
1“ 1“ 4“ 1.7/8 5/8 6 5160019
1“ 1“ 4.1/2 2“ 1“ 4 5160025
1.1/8 1.1250 4.1/2 2“ 1“ 6 5160026
1.1/8 1.1250 4.1/4 2“ 7/8 6 5160023
1.1/8 1.1250 4“ 1.3/4 3/4 6 5161720
1.1/4 1.2500 4“ 1.3/4 3/4 6 5161721
1.1/4 1.2500 4.1/4 2“ 7/8 6 5160024
1.1/4 1.2500 4.1/2 2“ 1“ 6 5160027
1.1/4 1.2500 4.1/2 2“ 1.1/4 6 5160030
1.3/8 1.3750 4.1/2 2“ 1“ 6 5160028
1.3/8 1.3750 4.1/4 2“ 3/4 6 5161722
1.1/2 1.5000 4.1/4 2“ 3/4 6 5161723
1.1/2 1.5000 4.1/2 2“ 1“ 6 5160029
1.1/2
1.3/4
1.3/4
2“
2“
1.5000
1.7500
1.7500
2“
2“
4.1/2
4.1/2
3.7/8
3.7/8
4.1/2
2“
2“
1.1/2
1.1/2
2“
1.1/4
1.1/4
3/4
3/4
1.1/4
6
6
6
8
8
5160031
5160033
5161724
5161725
5160035
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ 4-fl ute, regular length
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 421
941 - 944
941
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.1/4 3.1/16 3/8 4 5110044
5/16 0.3125 1.3/8 2“ 3/8 4 5110045
3/8 0.3750 1.1/2 3.1/4 3/8 4 5110046
7/16 0.4375 1.3/4 3.3/4 1/2 4 5110047
1/2 0.5000 2“ 4“ 1/2 4 5110048
5/8 0.6250 2.1/2 4.5/8 5/8 4 5110049
3/4 0.7500 3“ 5.1/4 3/4 4 5110050
7/8 0.8750 3.1/2 5.3/4 7/8 4 5110051
1“ 1.0000 4“ 6.1/2 1“ 4 5110052
1.1/8 1.1250 4“ 6.1/2 1“ 6 5110053
1.1/4 1.2500 4“ 6.1/2 1“ 6 5110054
1.1/4 1.2500 4“ 6.1/2 1.1/4 6 5110057
1.1/2 1.5000 4“ 6.1/2 1.1/4 6 5110058
1.1/2 1.5000 4“ 6.1/2 1“ 6 5110056
1.3/4 1.7500 4“ 6.1/2 1.1/4 6 5110059
2“ 2.0000 4“ 6.1/2 1.1/4 6 5110060
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.3/4 3.9/16 3/8 4 5110061
5/16 0.3125 2“ 3.3/4 3/8 4 5110062
3/8 0.3750 2.1/2 4.1/4 3/8 4 5110063
1/2 0.5000 3“ 5“ 1/2 4 5110064
5/8 0.6250 4“ 6.1/8 5/8 4 5110065
3/4 0.7500 4“ 6.1/4 3/4 4 5110066
7/8 0.8750 5“ 7.1/4 7/8 4 5110067
1“ 1.0000 6“ 8.1/2 1“ 4 5110068
1.1/4 1.2500 6“ 8.1/2 1.1/4 6 5110069
1.1/2 1.5000 6“ 8.1/2 1.1/4 6 5110070
944
Ɣ Fraises de fi nition
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ɣ Multi-fl ute, long length
ƔEnd Mill ƔFresas de acabado
ƔMulti-fl ute, extra length
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
422
945 - TN945
945
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 2.5/16 3/8 4 5110071
3/16 0.1875 1/2 2.3/8 3/8 4 5110072
1/4 0.2500 5/8 2.7/16 3/8 4 5110073
5/16 0.3125 3/4 2.1/2 3/8 4 5110074
3/8 0.3750 3/4 2.1/2 3/8 4 5110075
1/2 0.5000 1.1/4 3.1/4 1/2 4 5110076
5/8 0.6250 1.5/8 3.3/4 5/8 4 5110077
11/16 0.6875 1.5/8 3.3/4 5/8 4 5110078
3/4 0.7500 1.5/8 3.7/8 3/4 4 5110079
7/8 0.8750 1.7/8 4.1/8 7/8 4 5110080
1“ 1.0000 2“ 4.1/2 1“ 4 5110081
1.1/8 1.1250 2“ 4.1/2 1“ 4 5110082
1.1/4 1.2500 2“ 4.1/2 1.1/4 4 5110083
1.1/2 1.5000 2“ 4.1/2 1.1/4 4 5110084
Ɣ4-fl ute, regular length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 2.5/16 3/8 4 5160071
3/16 0.1875 1/2 2.3/8 3/8 4 5160072
1/4 0.2500 5/8 2.7/16 3/8 4 5160073
5/16 0.3125 3/4 2.1/2 3/8 4 5160074
3/8 0.3750 3/4 2.1/2 3/8 4 5160075
1/2 0.5000 1.1/4 3.1/4 1/2 4 5160076
5/8 0.6250 1.5/8 3.3/4 5/8 4 5160077
11/16 0.6875 1.5/8 3.3/4 5/8 4 5160078
3/4 0.7500 1.5/8 3.7/8 3/4 4 5160079
7/8 0.8750 1.7/8 4.1/8 7/8 4 5160080
1“ 1.0000 2“ 4.1/2 1“ 4 5160081
1.1/8 1.1250 2“ 4.1/2 1“ 4 5160082
1.1/4 1.2500 2“ 4.1/2 1.1/4 4 5160083
1.1/2 1.5000 2“ 4.1/2 1.1/4 4 5160084
TN945
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 423
900 - 946
900
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
3/8 0.3750 3/4 2.1/2 3/8 4 5110172
1/2 0.5000 1.1/4 3.1/4 1/2 4 5110173
5/8 0.6250 1.5/8 3.3/4 5/8 4 5110174
3/4 0.7500 1.5/8 3.7/8 3/4 4 5110175
7/8 0.8750 1.7/8 4.1/8 7/8 4 5110176
1“ 1.0000 2“ 4.1/2 1“ 4 5110177
1.1/4 1.2500 2“ 4.1/2 1.1/4 4 5110178
1.1/2 1.5000 2“ 4.1/2 1.1/4 4 5110179
Ɣ4-fl ute, regular length
946
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.1/4 3.1/16 3/8 4 5110085
5/16 0.3125 1.3/8 3.1/8 3/8 4 5110086
3/8 0.3750 1.1/2 3.1/4 3/8 4 5110087
1/2 0.5000 2“ 4“ 1/2 4 5110088
5/8 0.6250 2.1/2 4.5/8 5/8 4 5110089
3/4 0.7500 3“ 5.1/4 3/4 4 5110090
7/8 0.8750 3.1/2 5.3/4 7/8 4 5110091
1“ 1.0000 4“ 6.1/2 1“ 4 5110092
1.1/4 1.2500 4“ 6.1/2 1.1/4 4 5110093
Ɣ4-fl ute, long length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
424
TN946 - 901
TN946
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.1/4 3.1/16 3/8 4 5160085
5/16 0.3125 1.3/8 3.1/8 3/8 4 5160086
3/8 0.3750 1.1/2 3.1/4 3/8 4 5160087
1/2 0.5000 2“ 4“ 1/2 4 5160088
5/8 0.6250 2.1/2 4.5/8 5/8 4 5160089
3/4 0.7500 3“ 5.1/4 3/4 4 5160090
7/8 0.8750 3.1/2 5.3/4 7/8 4 5160091
1“ 1.0000 4“ 6.1/2 1“ 4 5160092
1.1/4 1.2500 4“ 6.1/2 1.1/4 4 5160093
901
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/2 0.5000 2“ 4“ 1/2 4 5110180
5/8 0.6250 2.1/2 4.5/8 5/8 4 5110181
3/4 0.7500 3“ 5.1/4 3/4 4 5110182
1“ 1.0000 4“ 6.1/2 1“ 4 5110183
Ɣ4-fl ute, ball nose, long length
Ɣ Fraises de fi nition bout hémisphériqueƔEnd Mill ƔFresas con punta esferica
Ɣ4-fl ute, long length
ƔEnd Mill Ɣ Fraises de fi nition ƔFresas de acabado
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 425
947 - 943
947
Ŷ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/4 0.2500 1.3/4 3.9/16 3/8 4 5110094
5/16 0.3125 2“ 3.3/4 3/8 4 5110095
3/8 0.3750 2.1/2 4.1/4 3/8 4 5110096
1/2 0.5000 3“ 5“ 1/2 4 5110097
5/8 0.6250 4“ 6.1/8 5/8 4 5110098
3/4 0.7500 4“ 6.1/4 3/4 4 5110099
7/8 0.8750 5“ 7.1/4 7/8 4 5110100
1“ 1.0000 6“ 8.1/2 1“ 4 5110101
1.1/4 1.2500 6“ 8.1/2 1.1/4 4 5110102
Ɣ
ƔEnd MillƔ Fraises de fi nition ƔFresas de acabado
Ɣ4-fl ute, extra length
943
ŶƔ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 3.1/16 3/8 4 5110186
5/32 0.1563 7/16 3.1/4 3/8 4 5110187
3/16 0.1875 1/2 3.1/4 3/8 4 5110188
7/32 0.2188 9/16 3.1/4 3/8 4 5110189
1/4 0.2500 5/8 3.3/8 3/8 4 5110190
9/32 0.2813 11/16 3.3/8 3/8 4 5110191
5/16 0.3125 3/4 3.1/2 3/8 4 5110192
11/32 0.3438 3/4 3.1/2 3/8 4 5110193
3/8 0.3750 3/4 3.1/2 3/8 4 5110194
13/32 0.4063 1“ 4.1/8 1/2 4 5110195
7/16 0.4375 1“ 4.1/8 1/2 4 5110196
15/32 0.4688 1“ 4.1/8 1/2 4 5110197
1/2 0.5000 1“ 4.1/8 1/2 4 5110198
9/16 0.5625 1.3/8 5“ 5/8 4 5110199
5/8 0.6250 1.3/8 5“ 5/8 4 5110200
11/16 0.6875 1.5/8 5.5/8 3/4 4 5110201
3/4 0.7500 1.5/8 5.5/8 3/4 4 5110202
13/16 0.8125 1.7/8 6.1/8 7/8 4 5110203
7/8 0.8750 1.7/8 6.1/8 7/8 4 5110204
15/16 0.9375 1.7/8 6.3/8 1“ 4 5111043
1“ 1.0000 1.7/8 6.3/8 1“ 4 5110206
Ɣ4-fl ute, double end, regular length
ƔEnd Mill Ɣ Fraises de fi nition - Double ƔFresas de acabado - Doble fi nal
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
426
TN943
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 3.1/16 3/8 4 5160186
5/32 0.1563 7/16 3.1/4 3/8 4 5160187
3/16 0.1875 1/2 3.1/4 3/8 4 5160188
7/32 0.2188 9/16 3.1/4 3/8 4 5160189
1/4 0.2500 5/8 3.3/8 3/8 4 5160190
9/32 0.2813 11/16 3.3/8 3/8 4 5160191
5/16 0.3125 3/4 3.1/2 3/8 4 5160192
11/32 0.3438 3/4 3.1/2 3/8 4 5160193
3/8 0.3750 3/4 3.1/2 3/8 4 5160194
13/32 0.4063 1“ 4.1/8 1/2 4 5160195
7/16 0.4375 1“ 4.1/8 1/2 4 5160196
15/32 0.4688 1“ 4.1/8 1/2 4 5160197
1/2 0.5000 1“ 4.1/8 1/2 4 5160198
9/16 0.5625 1.3/8 5“ 5/8 4 5160199
5/8 0.6250 1.3/8 5“ 5/8 4 5160200
11/16 0.6875 1.5/8 5.5/8 3/4 4 5160201
3/4 0.7500 1.5/8 5.5/8 3/4 4 5160202
13/16 0.8125 1.7/8 6.1/8 7/8 4 5160203
7/8 0.8750 1.7/8 6.1/8 7/8 4 5160204
1“ 1.0000 1.7/8 6.3/8 1“ 4 5160206
Ɣ4-fl ute, double end, regular length
ƔEnd Mill Ɣ Fraises de fi nition - Double ƔFresas de acabado - Doble fi nal
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 427
948 - TN948
948
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 3.1/16 3/8 4 5110162
3/16 0.1875 1/2 3.1/4 3/8 4 5110163
1/4 0.2500 5/8 3.3/8 3/8 4 5110164
5/16 0.3125 3/4 3.1/2 3/8 4 5110165
3/8 0.3750 3/4 3.1/2 3/8 4 5110166
1/2 0.5000 1“ 4.1/2 1/2 4 5110167
5/8 0.6250 1.3/8 5“ 5/8 4 5110168
3/4 0.7500 1.5/8 5.5/8 3/4 4 5110169
7/8 0.8750 1.7/8 6.1/8 7/8 4 5110170
1“ 1.0000 1.7/8 6.3/8 1“ 4 5110171
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/8 0.1250 3/8 3.1/16 3/8 4 5160162
3/16 0.1875 1/2 3.1/4 3/8 4 5160163
1/4 0.2500 5/8 3.3/8 3/8 4 5160164
5/16 0.3125 3/4 3.1/2 3/8 4 5160165
3/8 0.3750 3/4 3.1/2 3/8 4 5160166
1/2 0.5000 1“ 4.1/2 1/2 4 5160167
5/8 0.6250 1.3/8 5“ 5/8 4 5160168
3/4 0.7500 1.5/8 5.5/8 3/4 4 5160169
7/8 0.8750 1.7/8 6.1/8 7/8 4 5160170
1“ 1.0000 1.7/8 6.3/8 1“ 4 5160171
TN948
Ɣ4-fl ute, double end, regular length
ƔEnd Mill Ɣ Fraises de fi nition - Double ƔFresas de acabado - Doble fi nal
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
428
911 - 917
911
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/32 0.0313 3/32 2.1/4 3/16 2 5110714
3/64 0.0469 9/64 2.1/4 3/16 2 5110489
1/16 0.0625 3/16 2.1/4 3/16 2 5110490
5/64 0.0781 15/64 2.1/4 3/16 2 5110491
3/32 0.0938 9/32 2.1/4 3/16 2 5110492
7/64 0.1094 21/64 2.1/4 3/16 2 5110493
1/8 0.1250 3/8 2.1/4 3/16 2 5110494
9/64 0.1406 13/32 2.1/4 3/16 2 5110495
5/32 0.1563 7/16 2.1/4 3/16 2 5110496
11/64 0.1719 1/2 2.1/4 3/16 2 5110497
3/16 0.1875 1/2 2.1/4 3/16 2 5110498
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 3/16 2.1/4 3/16 4 5110537
3/32 0.0938 9/32 2.1/4 3/16 4 5110538
1/8 0.1250 3/8 2.1/4 3/16 4 5110539
5/32 0.1563 7/16 2.1/4 3/16 4 5110540
3/16 0.1875 1/2 2.1/4 3/16 4 5110541
917
Ɣ 2-fl ute, miniature, double end, regular length
ƔEnd Mill Ɣ Fraises de fi nition - Double ƔFresas de acabado - Doble fi nal
Ɣ 4-fl ute, miniature, double end, regular length
ƔEnd Mill Ɣ Fraises de fi nition - Double ƔFresas de acabado - Doble fi nal
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 429
Ɣ Corner Rounding Cutter Ɣ Fraises concaves Ɣ Fresas frontales de perfi l cóncavo
919 - 883
919
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch
d2
Ø
Inch # Flutes
EDP #
or
e-Code
1/16 0.0625 7/32 2.1/2 3/16 4 5110546
3/32 0.0938 9/32 2.5/8 3/16 4 5110547
1/8 0.1250 3/4 3.1/8 3/16 4 5110548
5/32 0.1563 7/8 3.1/4 3/16 4 5110549
3/16 0.1875 1“ 3.3/8 3/16 4 5110550
Ŷ
Ɣ
R
Inch
d1
Ø
Inch
d2
Ø
Inch l1
Inch # Flutes
EDP #
or
e-Code
883
Ɣ4-fl ute, double end, miniature, long length
1/16 7/16 3/8 2.1/2 4 5110686
1/2 1.1/2 1“ 4.1/8 4 5110695
3/32 1/2 3/8 2.1/2 4 5110687
1/8 5/8 1/2 3“ 4 5110688
5/32 3/4 1/2 3“ 4 5110689
3/16 7/8 3/4 3.1/8 4 5110690
1/4 1.000 3/4 3.1/4 4 5110691
5/16 1.1/8 7/8 3.1/2 4 5110692
3/8 1.1/4 7/8 3.3/4 4 5110693
7/16 1.3/8 1“ 4“ 4 5110694
r
Ɣ End Mill Ɣ Fraises de fi nition - Double ƔFresas de acabado - Doble fi nal
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
430
C191
Ŷ
Ɣ
d1
Ø
Inch
d1
Ø
mm
d2
Ø
mm
l2
mm
l1
mm #
Flutes Stock
No.
EDP #
or
e-Code
1.50 6.00 2.5 48.5 2 0412336 C1911.5
1/16 1.59 6.35 - 1/4 2.5 48.5 2 0412404 C1911/16 1)
5/64 1.98 6.35 - 1/4 2.5 49.0 2 0413043 C1915/64 1)
2.00 6.00 3.0 49.0 2 0412626 C1912.0
3/32 2.38 6.35 - 1/4 4.5 51.0 2 0412886 C1913/32 1)
2.50 6.00 4.5 51.0 2 0412633 C1912.5
7/64 2.78 6.35 - 1/4 6.5 51.0 2 0413128 C1917/64 1)
3.00 6.00 7.0 51.0 2 0412824 C1913.0
1/8 3.18 6.35 - 1/4 7.0 51.0 2 0412572 C1911/8 1)
3.50 6.00 7.5 52.5 2 0412831 C1913.5
9/64 3.57 6.35 - 1/4 9.5 52.5 2 0413203 C1919/64 1)
5/32 3.97 6.35 - 1/4 9.5 52.5 2 0413036 C1915/32 1)
4.00 6.00 9.5 52.5 2 0412954 C1914.0
11/64 4.37 6.35 - 1/4 9.5 52.5 2 0412411 C19111/64 1)
4.50 6.00 9.5 52.5 2 0412961 C1914.5
3/16 4.76 6.35 - 1/4 9.5 52.5 2 0412855 C1913/16 1)
5.00 6.00 9.5 52.5 2 0412992 C1915.0
13/64 5.16 6.35 - 1/4 11.0 55.5 2 0412473 C19113/64 1)
5.50 6.00 11.0 55.5 2 0413005 C1915.5
7/32 5.56 6.35 - 1/4 11.0 55.5 2 0413111 C1917/32 1)
15/64 5.95 6.35 - 1/4 11.0 56.5 2 0412527 C19115/64 1)
6.00 6.00 11.0 56.5 2 0413067 C1916.0
1/4 6.35 6.35 - 1/4 11.0 56.5 2 0412480 C1911/4 1)
6.50 10.00 11.0 58.5 2 0413074 C1916.5
17/64 6.75 9.53 - 3/8 11.0 59.5 2 0412565 C19117/64 1)
7.00 10.00 11.0 58.5 2 0413081 C1917.0
9/32 7.14 9.53 - 3/8 11.0 58.5 2 0413197 C1919/32 1)
7.50 10.00 11.0 58.5 2 0413098 C1917.5
19/64 7.54 9.53 - 3/8 12.5 58.5 2 0412619 C19119/64 1)
5/16 7.94 9.53 - 3/8 12.5 59.5 2 0413029 C1915/16 1)
8.00 10.00 12.5 59.5 2 0413142 C1918.0
21/64 8.33 9.53 - 3/8 14.5 59.5 2 0412688 C19121/64 1)
8.50 10.00 14.5 60.5 2 0413159 C1918.5
11/32 8.73 9.53 - 3/8 14.5 60.5 2 0412398 C19111/32 1)
9.00 10.00 14.5 60.5 2 0413166 C1919.0
23/64 9.13 9.53 - 3/8 14.5 60.5 2 0412725 C19123/64 1)
Ɣ Fraises à rainurerƔSlot Drill Ɣ Fresas Frontales
1) diameter tolerance -.0005 inches / -.0013 inches / tolérance sur le diamètre -.0005 inches / -.0013 inches / Tolerancia diámetro -.0005 pulgadas/ - .0013 pulgadas
2) diameter tolerance -.0005 inches / -.0015 inches / tolérance sur le diamètre -.0005 inches / -.0015 inches / Tolerancia diámetro -.0005 pulgadas /- .0015 pulgadas
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 431
C191
d1
Ø
Inch
d1
Ø
mm
d2
Ø
mm
l2
mm
l1
mm #
Flutes Stock
No.
EDP #
or
e-Code
9.50 10.00 14.5 60.5 2 0413173 C1919.5
3/8 9.53 9.53 - 3/8 14.5 60.5 2 0412930 C1913/8 1)
25/64 9.92 9.53 - 3/8 16.0 60.5 2 0412756 C19125/64 1)
10.00 10.00 14.5 60.5 2 0412343 C19110.0
13/32 10.32 9.53 - 3/8 16.0 60.5 2 0412466 C19113/32 1)
10.50 12.00 17.5 65.0 2 0412350 C19110.5
27/64 10.72 12.70 - 1/2 17.5 65.0 2 0412787 C19127/64 1)
11.00 12.00 17.5 65.0 2 0412367 C19111.0
7/16 11.11 12.70 - 1/2 17.5 65.0 2 0413104 C1917/16 1)
11.50 12.00 17.5 65.0 2 0412374 C19111.5
29/64 11.51 12.70 - 1/2 17.5 65.0 2 0412817 C19129/64 1)
12.00 12.00 19.0 66.5 2 0412435 C19112.0
31/64 12.30 12.70 - 1/2 19.0 66.5 2 0412862 C19131/64 1)
1/2 12.70 12.70 - 1/2 19.0 66.5 2 0412428 C1911/2 1)
13.00 12.00 19.0 66.5 2 0412442 C19113.0
17/32 13.49 12.70 - 1/2 22.0 68.5 2 0412558 C19117/32 2)
14.00 12.00 22.0 68.5 2 0412497 C19114.0
9/16 14.29 12.70 - 1/2 21.5 69.0 2 0413180 C1919/16 2)
15.00 16.00 22.0 72.0 2 0412503 C19115.0
19/32 15.08 15.88 - 5/8 22.0 72.0 2 0412602 C19119/32 2)
5/8 15.88 15.88 - 5/8 22.0 72.0 2 0413050 C1915/8 2)
16.00 16.00 22.0 72.0 2 0412534 C19116.0
21/32 16.67 15.88 - 5/8 24.0 73.0 2 0412671 C19121/32 2)
17.00 16.00 24.0 74.0 2 0412541 C19117.0
11/16 17.46 15.88 - 5/8 24.0 74.0 2 0412381 C19111/16 2)
18.00 16.00 24.0 74.0 2 0412589 C19118.0
23/32 18.26 15.88 - 5/8 25.5 75.5 2 0412718 C19123/32 2)
19.00 16.00 25.5 77.0 2 0412596 C19119.0
3/4 19.05 15.88 - 5/8 25.5 77.0 2 0412893 C1913/4 2)
20.00 16.00 25.5 77.0 2 0412657 C19120.0
13/16 20.64 25.40 - 1 25.4 98.5 2 0412459 C19113/16 2)
21.00 25.00 25.5 98.5 2 0412664 C19121.0
22.00 25.00 25.5 100.0 2 0412695 C19122.0
7/8 22.23 25.40 - 1 25.5 100.0 2 0413135 C1917/8 2)
23.00 25.00 25.5 101.5 2 0412701 C19123.0
15/16 23.81 25.40 - 1 25.5 103.0 2 0412510 C19115/16 2)
24.00 25.00 25.5 103.0 2 0412732 C19124.0
25.00 25.00 27.0 95.0 2 0412749 C19125.0
125.40 25.40 - 1 27.0 95.0 2 0412237 C1911 2)
26.00 25.00 27.0 95.0 2 0412763 C19126.0
1.1/16 26.99 25.40 - 1 28.5 93.5 2 0412244 C1911.1/16 2)
27.00 25.00 28.5 93.5 2 0412770 C19127.0
28.00 25.00 30.0 95.0 2 0412794 C19128.0
1.1/8 28.58 25.40 - 1 30.0 95.0 2 0412299 C1911.1/8 2)
29.00 25.00 30.0 93.5 2 0412800 C19129.0
30.00 25.00 30.0 93.5 2 0412848 C19130.0
1.1/4 31.75 25.40 - 1 38.0 101.5 2 0412275 C1911.1/4X1 2)
1.1/4 31.75 31.75 - 1.1/4 35.0 117.5 2 0412282 C1911.1/4X1.1/4 2)
32.00 25.00 38.0 101.5 2 0412879 C19132.0X25.0
34.00 25.00 38.0 101.5 2 0412909 C19134.0X25.0
1.3/8 34.93 25.40 - 1 39.5 103.0 2 0412312 C1911.3/8X1 2)
35.00 25.00 39.5 103.0 2 0412916 C19135.0X25.0
36.00 25.00 39.5 103.0 2 0412923 C19136.0X25.0
38.00 25.00 43.0 106.5 2 0412947 C19138.0X25.0
Ɣ Fraises à rainurerƔSlot Drill Ɣ Fresas Frontales
1) diameter tolerance -.0005 inches / -.0013 inches / tolérance sur le diamètre -.0005 inches / -.0013 inches / Tolerancia diámetro -.0005 pulgadas/ - .0013 pulgadas
2) diameter tolerance -.0005 inches / -.0015 inches / tolérance sur le diamètre -.0005 inches / -.0015 inches / Tolerancia diámetro -.0005 pulgadas /- .0015 pulgadas
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
432
C191 - C192
d1
Ø
Inch
d1
Ø
mm
d2
Ø
mm
l2
mm
l1
mm #
Flutes Stock
No.
EDP #
or
e-Code
1.1/2 38.10 25.40 - 1 43.0 106.5 2 0412251 C1911.1/2X1 2)
1.1/2 38.10 31.75 - 1.1/4 43.0 114.5 2 0412268 C1911.1/2X1.1/4 2)
40.00 25.00 46.0 111.0 2 0412978 C19140.0X25.0
1.5/8 41.28 25.40 - 1 47.5 112.5 2 0412329 C1911.5/8X1 2)
1.3/4 44.45 25.40 - 1 51.0 116.0 2 0412305 C1911.3/4X1 2)
45.00 25.00 51.0 116.0 2 0412985 C19145.0X25.0
50.00 32.00 51.0 117.5 2 0413012 C19150.0X32.0
2“ 50.80 25.40 - 1 57.0 122.0 2 0412640 C1912X1 2)
C192
Ŷ
Ɣ
d1
Ø
Inch
d1
Ø
mm
d2
Ø
mm
l2
mm
l1
mm #
Flt Stock
No.
EDP #
or
e-Code
1/16 1.59 6.35 - 1/4 4.5 51.0 2 0413289 C1921/16 1)
2.00 6.0 4.0 51.0 2 0413418 C1922.0
3.00 6.0 11.0 60.5 2 0413487 C1923.0
1/8 3.18 6.35 - 1/4 11.0 63.5 2 0413388 C1921/8 1)
5/32 3.97 6.35 - 1/4 12.5 70.0 2 0413562 C1925/32 1)
4.00 6.0 12.5 66.5 2 0413531 C1924.0
3/16 4.76 6.35 - 1/4 12.5 70.0 2 0413500 C1923/16 1)
5.00 6.0 12.5 70.0 2 0413548 C1925.0
6.00 6.0 16.0 76.0 2 0413586 C1926.0
1/4 6.35 6.35 - 1/4 16.0 76.0 2 0413333 C1921/4 1)
6.50 10.0 16.0 76.0 2 0413593 C1926.5
7.00 10.0 16.0 76.0 2 0413609 C1927.0
9/32 7.14 9.53 - 3/8 16.0 76.0 2 0413685 C1929/32 1)
7.50 10.0 16.0 76.0 2 0413616 C1927.5
5/16 7.94 9.53 - 3/8 19.0 79.5 2 0413555 C1925/16 1)
8.00 10.0 19.0 79.5 2 0413647 C1928.0
8.50 10.0 22.0 82.5 2 0413654 C1928.5
11/32 8.73 9.53 - 3/8 22.0 82.5 2 0413272 C19211/32 1)
9.00 10.0 22.0 82.5 2 0413661 C1929.0
3/8 9.53 9.53 - 3/8 22.0 82.5 2 0413524 C1923/8 1)
10.00 10.0 22.0 82.5 2 0413258 C19210.0
13/32 10.32 9.53 - 3/8 22.2 89.0 2 0413326 C19213/32 1)
11.00 12.0 22.0 89.0 2 0413265 C19211.0
7/16 11.11 12.7 - 1/2 22.0 89.0 2 0413623 C1927/16 1)
12.00 12.0 25.5 95.0 2 0413302 C19212.0
1/2 12.70 12.7 - 1/2 25.5 95.0 2 0413296 C1921/2 1)
d1
Ø
Inch
d1
Ø
mm
d2
Ø
mm
l2
mm
l1
mm #
Flt Stock
No.
EDP #
or
e-Code
13.00 12.0 25.5 95.0 2 0413319 C19213.0
14.00 12.0 28.5 101.5 2 0413340 C19214.0
9/16 14.29 12.7 - 1/2 28.5 101.5 2 0413678 C1929/16 2)
15.00 16.0 31.5 108.0 2 0413357 C19215.0
5/8 15.88 15.88 -
5/8 31.5 108.0 2 0413579 C1925/8 2)
16.00 16.0 31.5 108.0 2 0413364 C19216.0
17.00 16.0 35.0 114.5 2 0413371 C19217.0
18.00 16.0 35.0 114.5 2 0413395 C19218.0
19.00 16.0 38.0 120.5 2 0413401 C19219.0
3/4 19.05 15.88 -
5/8 38.0 120.7 2 0413517 C1923/4 2)
20.00 16.0 38.0 120.5 2 0413425 C19220.0
22.00 25.0 41.5 140.0 2 0413432 C19222.0
7/8 22.23 25.4 - 1 41.5 139.7 2 0413630 C1927/8 2)
24.00 25.0 41.5 152.5 2 0413449 C19224.0
25.00 25.0 44.5 159.0 2 0413456 C19225.0
1“ 25.40 25.4 - 1 44.5 159.0 2 0413210 C1921 2)
26.00 25.0 44.5 159.0 2 0413463 C19226.0
28.00 25.0 47.5 159.0 2 0413470 C19228.0
30.00 25.0 51.0 159.0 2 0413494 C19230.0
1.1/8 28.58 25.4 - 1 47.5 159.0 2 0413241 C1921.1/8 2)
1.1/4 31.75 25.4 - 1 51.0 159.0 2 0413234 C1921.1/4X1 2)
1.1/2 38.10 25.4 - 1 57.0 159.0 2 0413227 C1921.1/2X1 2)
C191
1) diameter tolerance -.0005 inches / -.0013 inches / tolérance sur le diamètre -.0005 inches / -.0013 inches / Tolerancia diámetro -.0005 pulgadas/ - .0013 pulgadas
2) diameter tolerance -.0005 inches / -.0015 inches / tolérance sur le diamètre -.0005 inches / -.0015 inches / Tolerancia diámetro -.0005 pulgadas /- .0015 pulgadas
2) diameter tolerance -.0005 inches / -.0015 inches / tolérance sur le diamètre -.0005 inches / -.0015 inches / Tolerancia diámetro -.0005 pulgadas /- .0015 pulgadas
Ɣ Fraises à rainurerƔSlot Drill Ɣ Fresas Frontales
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 433
C291
Ŷ
Ɣ
d1
Ø
Inch
d1
Ø
mm
l2
mm
d2
Ø
mm
l1
mm #
Flutes Stock
No.
EDP #
or
e-Code
1/16 1.59 2.5 6.35 - 1/4 48.5 2 0413791 C2911/16 1)
2.00 3.0 6.0 49.0 2 0413920 C2912.0 1)
3/32 2.38 6.5 6.35 - 1/4 51.0 4 0414095 C2913/32 1)
2.50 6.5 6.0 51.0 4 0413937 C2912.5 1)
3.00 9.5 6.0 54.0 4 0414040 C2913.0 1)
1/8 3.18 9.5 6.35 - 1/4 54.0 4 0413890 C2911/8 1)
3.50 12.5 6.0 57.0 4 0414057 C2913.5 1)
5/32 3.97 12.5 6.35 - 1/4 57.0 4 0414255 C2915/32 1)
4.00 12.5 6.0 57.0 4 0414163 C2914.0 1)
4.50 12.5 6.0 57.0 4 0414170 C2914.5 1)
3/16 4.76 12.5 6.35 - 1/4 57.0 4 0414071 C2913/16 1)
5.00 16.0 6.0 60.5 4 0414217 C2915.0 1)
5.50 16.0 6.0 60.5 4 0414224 C2915.5 1)
6.00 16.0 6.0 60.5 4 0414279 C2916.0 1)
1/4 6.35 16.0 6.35 - 1/4 60.5 4 0413845 C2911/4 1)
6.50 16.0 10.0 60.5 4 0414286 C2916.5 1)
7.00 15.0 10.0 60.5 4 0414293 C2917.0 1)
7.50 18.0 10.0 63.5 4 0414309 C2917.5 1)
5/16 7.94 18.0 9.53 - 3/8 63.5 4 0414248 C2915/16 1)
8.00 18.0 10.0 63.5 4 0414330 C2918.0 1)
8.50 21.0 10.0 66.5 4 0414347 C2918.5 1)
9.00 21.0 10.0 66.5 4 0414354 C2919.0 1)
9.50 21.0 10.0 66.5 4 0414361 C2919.5 1)
3/8 9.53 21.0 9.53 - 3/8 66.5 4 0414149 C2913/8 1)
10.00 21.0 10.0 66.5 4 0413760 C29110.0 1)
13/32 10.32 22.5 9.53 - 3/8 66.5 4 0413838 C29113/32 1)
10.50 19.0 10.0 66.5 4 0413777 C29110.5 1)
11.00 19.0 12.0 66.5 4 0413784 C29111.0 1)
7/16 11.11 19.0 12.7 - 1/2 66.5 4 0414316 C2917/16 1)
12.00 24.0 12.0 70.0 4 0413814 C29112.0 1)
1/2 12.70 24.0 12.7 - 1/2 70.0 4 0413807 C2911/2 1)
13.00 24.5 12.0 70.0 4 0413821 C29113.0 1)
14.00 28.5 12.0 73.0 4 0413852 C29114.0 1)
9/16 14.29 28.5 12.7 - 1/2 73.0 4 0414378 C2919/16 1)
15.00 26.5 16.0 77.0 4 0413869 C29115.0 1)
5/8 15.88 26.5 15.88 - 5/8 77.0 4 0414262 C2915/8 1)
ƔEnd Mill Ɣ Fraises de fi nition Ɣ Fresas de acabado
1) diameter tolerance +.0025 inches / -.0005 inches / tolérance sur le diamètre +.0025 inches / -.0005 inches / Tolerancia diámetro + .0025 pulgadas/ -.0005 pulgadas
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
434
C291
d1
Ø
Inch
d1
Ø
mm
l2
mm
d2
Ø
mm
l1
mm #
Flutes Stock
No.
EDP #
or
e-Code
16.00 26.5 16.0 77.0 4 0413876 C29116.0 1)
17.00 32.0 16.0 80.0 4 0413883 C29117.0 1)
18.00 35.0 16.0 80.0 4 0413906 C29118.0 1)
19.00 38.0 16.0 83.5 4 0413913 C29119.0 1)
3/4 19.05 38.0 15.88 - 5/8 83.5 4 0414101 C2913/4 1)
20.00 38.0 16.0 83.5 4 0413968 C29120.0 1)
21.00 38.0 25.0 95.0 6 0413975 C29121.0 1)
22.00 41.5 25.0 98.5 6 0413982 C29122.0 1)
7/8 22.23 41.5 25.4 - 1 98.5 6 0414323 C2917/8 1)
23.00 41.5 25.0 98.5 6 0413999 C29123.0 1)
24.00 41.5 25.0 98.5 6 0414002 C29124.0 1)
25.00 44.5 25.0 101.5 6 0414019 C29125.0 1)
1“ 25.40 43.0 25.4 - 1 101.5 6 0413692 C2911 1)
26.00 43.0 25.0 101.5 6 0414026 C29126.0 1)
28.00 46.0 25.0 104.5 6 0414033 C29128.0 1)
1.1/8 28.58 46.0 25.4 - 1 104.5 6 0413722 C2911.1/8 1)
30.00 46.0 25.0 104.5 6 0414064 C29130.0 1)
1.1/4 31.75 49.0 25.4 - 1 108.0 6 0413715 C2911.1/4X1 1)
32.00 49.0 25.0 108.0 6 0414088 C29132.0X25.0 1)
34.00 49.0 25.0 108.0 6 0414118 C29134.0X25.0 1)
1.3/8 34.93 52.5 25.4 - 1 111.0 6 0413746 C2911.3/8X1 1)
35.00 52.5 25.0 111.0 6 0414125 C29135.0X25.0 1)
36.00 52.5 25.0 111.0 6 0414132 C29136.0X25.0 1)
38.00 55.5 25.0 114.5 6 0414156 C29138.0X25.0 1)
1.1/2 38.10 55.5 25.4 - 1 114.5 6 0413708 C2911.1/2X1 1)
40.00 58.5 25.0 117.5 8 0414187 C29140.0X25.0 2)
1.5/8 41.28 60.5 25.4 - 1 117.5 8 0413753 C2911.5/8X1 2)
42.00 60.5 25.0 117.5 8 0414194 C29142.0X25.0 2)
1.3/4 44.45 63.5 25.4 - 1 120.5 8 0413739 C2911.3/4X1 2)
45.00 63.5 25.0 120.5 8 0414200 C29145.0X25.0 2)
50.00 65.0 32.0 127.0 8 0414231 C29150.0X32.0 2)
2“ 50.80 70.0 25.4 - 1 127.0 8 0413944 C2912X1 2)
2“ 50.80 65.0 31.75 - 1.1/4 127.0 8 0413951 C2912X1.1/4 2)
1) diameter tolerance +.0025 inches / -.0005 inches / tolérance sur le diamètre +.0025 inches / -.0005 inches / Tolerancia diámetro + .0025 pulgadas/ -.0005 pulgadas
2) diameter tolerance +0.005 inches / 0 / tolérance sur le diamètre +.0005 inches / 0 / Tolerancia diámetro + 0.0055 pulgadas/ -.0
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 435
C292
Ŷ
Ɣ
d1
Ø
Inch
d1
Ø
mm
l2
mm
d2
Ø
mm
l1
mm #
Flutes Stock
No.
EDP #
or
e-Code
1/16 1.59 4.5 6.35 - 1/4 51.0 2 0414446 C2921/16 1)
3.00 19.0 6.0 63.5 4 0414606 C2923.0 1)
1/8 3.18 19.0 6.35 - 1/4 63.5 4 0414538 C2921/8 1)
3.50 25.5 6.0 70.0 4 0414613 C2923.5 1)
4.00 25.5 6.0 70.0 4 0414675 C2924.0 1)
4.50 25.5 6.0 70.0 4 0414682 C2924.5 1)
3/16 4.76 25.5 6.35 - 1/4 70.0 4 0414637 C2923/16 1)
5.00 31.5 6.0 76.0 4 0414699 C2925.0 1)
6.00 31.5 6.0 76.0 4 0414729 C2926.0 1)
1/4 6.35 31.5 6.35 - 1/4 76.0 4 0414484 C2921/4 1)
7.00 34.0 10.0 79.5 4 0414736 C2927.0 1)
9/32 7.14 34.0 9.53 - 3/8 79.5 4 0414798 C2929/32 1)
5/16 7.94 34.0 9.53 - 3/8 79.5 4 0414705 C2925/16 1)
8.00 34.0 10.0 79.5 4 0414767 C2928.0 1)
9.00 37.0 10.0 82.5 4 0414774 C2929.0 1)
3/8 9.53 37.0 9.53 - 3/8 82.5 4 0414668 C2923/8 1)
10.00 37.0 10.0 82.5 4 0414422 C29210.0 1)
11.00 41.5 12.0 89.0 4 0414439 C29211.0 1)
7/16 11.11 41.5 12.7 - 1/2 89.0 4 0414743 C2927/16 1)
12.00 49.5 12.0 95.0 4 0414460 C29212.0 1)
1/2 12.70 49.5 12.7 - 1/2 95.0 4 0414453 C2921/2 1)
13.00 50.0 12.0 95.0 4 0414477 C29213.0 1)
14.00 57.0 12.0 101.5 4 0414491 C29214.0 1)
9/16 14.29 57.0 12.7 - 1/2 101.5 4 0414781 C2929/16 1)
15.00 58.5 16.0 108.5 4 0414507 C29215.0 1)
5/8 15.88 58.5 15.88 - 5/8 108.5 4 0414712 C2925/8 1)
16.00 58.5 16.0 108.5 4 0414514 C29216.0 1)
17.00 67.0 16.0 115.0 4 0414521 C29217.0 1)
18.00 70.0 16.0 115.0 4 0414545 C29218.0 1)
19.00 76.0 16.0 121.5 4 0414552 C29219.0 1)
3/4 19.05 76.0 15.88 - 5/8 121.5 4 0414651 C2923/4 1)
20.00 76.0 16.0 121.5 4 0414569 C29220.0 1)
22.00 85.5 25.0 143.0 6 0414576 C29222.0 1)
7/8 22.23 85.5 25.4 - 1 143.0 6 0414750 C2927/8 1)
24.00 92.0 25.0 149.0 6 0414583 C29224.0 1)
25.00 100.0 25.0 157.0 6 0414590 C29225.0 1)
1“ 25.40 100.0 25.4 - 1 157.0 6 0414385 C2921 1)
1.1/8 28.58 98.5 25.4 - 1 157.0 6 0414415 C2921.1/8 1)
30.00 98.5 25.0 157.0 6 0414620 C29230.0 1)
1.1/4 31.75 100.0 25.4 - 1 159.0 6 0414408 C2921.1/4X1 1)
32.00 100.0 25.0 159.0 6 0414644 C29232.0X25.0 1)
1.1/2 38.10 100.0 25.4 - 1 159.0 6 0414392 C2921.1/2X1 1)
ƔEnd Mill Ɣ Fraises de fi nition Ɣ Fresas de acabado
1) diameter tolerance +.0025 inches / -.0005 inches / tolérance sur le diamètre +.0025 inches / -.0005 inches / Tolerancia diámetro + .0025 pulgadas/ -.0005 pulgadas
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
436
C391 - C392
C391
Ŷ
Ɣ
d1
Ø
Inch
d1
Ø
mm
d2
Ø
mm
l2
mm
l1
mm #
Flt Stock
No.
EDP #
or
e-Code
6.00 6 16.0 60.5 3 0414934 C3916.0
1/4 6.35 6.35 - 1/4 16.0 60.5 3 0414842 C3911/4 1)
8.00 10 18.0 63.5 3 0414958 C3918.0
3/8 9.53 9.53 - 3/8 21.0 66.5 3 0414910 C3913/8 1)
10.00 10 21.0 66.5 3 0414811 C39110.0
12.00 12 24.0 70.0 3 0414835 C39112.0
1/2 12.70 12.7 - 1/2 24.0 70.0 3 0414828 C3911/2 1)
14.00 12 28.5 73.0 3 0414859 C39114.0
d1
Ø
Inch
d1
Ø
mm
d2
Ø
mm
l2
mm
l1
mm #
Flt Stock
No.
EDP #
or
e-Code
5/8 15.88 15.88 -
5/8 27.0 77.0 3 0414927 C3915/8 2)
16.00 16 26.5 77.0 3 0414866 C39116.0
18.00 16 33.0 80.0 3 0414873 C39118.0
3/4 19.05 15.88 -
5/8 38.0 83.5 3 0414903 C3913/4 2)
20.00 16 38.0 83.5 3 0414880 C39120.0
7/8 22.23 25.4 - 1. 35.0 98.5 3 0414941 C3917/8 2)
25.00 25 40.0 101.5 3 0414897 C39125.0
1“ 25.40 25.4 - 1. 40.0 101.5 3 0414804 C3911 2)
C392
Ŷ
Ɣ
d1
Ø
mm
d2
Ø
mm
l2
mm
l1
mm #
Flutes Stock
No.
EDP #
or
e-Code
6.00 6 31.5 76.0 3 0415023 C3926.0
8.00 10 34.0 79.5 3 0415030 C3928.0
10.00 10 37.0 82.5 3 0414965 C39210.0
12.00 12 49.5 95.0 3 0414972 C39212.0
d1
Ø
mm
d2
Ø
mm
l2
mm
l1
mm #
Flutes Stock
No.
EDP #
or
e-Code
14.00 12 57.0 101.5 3 0414989 C39214.0
16.00 16 58.5 108.5 3 0414996 C39216.0
18.00 16 67.5 115.0 3 0415009 C39218.0
20.00 16 76.0 121.5 3 0415016 C39220.0
ƔSlot Drill Ɣ Fraises à rainurer Ɣ Fresas Frontales
ƔSlot Drill Ɣ Fraises à rainure Ɣ Fresas Frontales
1) diameter tolerance -.0005 inches / -.0013 inches / tolérance sur le diamètre -.0005 inches / -.0013 inches / Tolerancia diámetro -.0005 pulgadas/ - .0013 pulgadas
2) diameter tolerance -.0005 inches / -.0015 inches / tolérance sur le diamètre -.0005 inches / -.0015 inches / Tolerancia diámetro -.0005 pulgadas /- .0015 pulgadas
437
www.precisiondormer.com
Style Description # of Flutes Finish Page No.
4602 60° and 82° Included Angles 4 Bright 464
4603 60°, 82° ,90° Included Angles Single Bright 465
G135 60° Included Angle 3 Bright 465
G136 90° Included Angle 3 Bright 466
G137 60° Included Angle 3 Bright 466
G138 90° Included Angle 3 Bright 467
G154 82° Included Angle 3 Bright 467
4702 Short, Straight Shank N//A Bright 459
4703 Short, Taper Shank N//A Bright 460
4706 Aircraft Short, Reduced Shank N//A Bright 461
4700 Long, Straight Shank N//A Bright 461
4705 Aircraft Long, Straight Shank N//A Bright 462
4704 Counterbore Pilots N//A Bright 463
411 Drift Keys N//A Surface Treated 468
430 Drill Sleeves N//A Surface Treated 468
707, 727, 757 Tool Bit Blanks N//A N//A 468
1800, 1815, 1816 Screw Extractor Sets N//A Bright 468
1900 Cutting Oil N//A N//A 468
4533 Chucking, Straight Flute 4 Bright 443
4533S Chucking Set, Straight Flute N//A Bright 446
4535 Chucking, Right-Hand Spiral 4 Bright 447
4543 Chucking, Left-Hand Spiral 4 Bright 448
4500 Hand Reamer, Straight Flute Multi Bright 449
4531 Chucking, Expansion Multi Bright 450
4587 Taper Pin, Straight Flute Multi Bright 451
4591 Taper Pin, Left-Hand Spiral Multi Bright 451
4588 Taper Pin, Left-Hand, High Spiral Multi Bright 452
4600 Taper Pipe, Left-Hand Spiral Multi Bright 452
4537 Chucking, R.H. Spiral, R.H. Cut Multi Bright 453
4536 Chucking, Straight Flute, R.H. Cut Multi Bright 454
4532 Chucking, Expansion Multi Bright 455
4579 Bridge, Spiral Flute, R.H. Cut N//A Bright 456
4608 Center, Straight Shank N/A Bright 456
SS300 Core Drill 3 Bright 457
SS400 Core Drill 4 Bright 457
T400 Core Drill 4 Surface Treated 458
Reamers
Counterbores
Countersinks
Miscellaneous
Table of Contents
Reamers, Counterbores, Countersinks, Miscellaneous
438
How To Use This Chart to Find Cutting Feed Rate (IPR):
1. Find your Alpha Code on the AMG Chart (example: 82 C : C is the Alpha Code) .
2. Find the closest diameter for your cutting application on the chart to fi nd your IPR.
Reamers - Feed in MM per Revolution Ø Diameter
1.5 2 3 5 8 10 12 16 20 25 30 40 50
A0.045 0.055 0.078 0.100 0.150 0.170 0.185 0.220 0.250 0.280 0.320 0.390 0.440
B0.055 0.072 0.110 0.150 0.180 0.210 0.240 0.280 0.310 0.360 0.400 0.500 0.550
C0.065 0.085 0.135 0.185 0.220 0.260 0.285 0.335 0.390 0.440 0.480 0.600 0.680
D0.080 0.110 0.160 0.200 0.270 0.320 0.360 0.410 0.470 0.540 0.600 0.730 0.850
E0.100 0.140 0.180 0.250 0.350 0.390 0.430 0.500 0.530 0.640 0.750 0.910 1.100
F0.140 0.180 0.260 0.350 0.440 0.500 0.550 0.630 0.700 0.800 0.930 1.200 1.500
mm/REV ± 15%
Alpha
Code
Reamers - Feed in Inches per Revolution Ø Diameter
1/16 5/64 1/8 3/16 5/16 25/64 1/2 5/8 25/32 1” 1-13/16 1-1/2 2”
A0.002 0.002 0.003 0.004 0.006 0.007 0.007 0.009 0.010 0.011 0.013 0.015 0.017
B0.002 0.003 0.004 0.006 0.007 0.008 0.009 0.011 0.012 0.014 0.016 0.020 0.022
C0.003 0.003 0.005 0.007 0.009 0.010 0.011 0.013 0.015 0.017 0.019 0.024 0.027
D0.031 0.004 0.006 0.008 0.011 0.013 0.014 0.016 0.019 0.021 0.024 0.029 0.033
E0.004 0.006 0.007 0.010 0.014 0.015 0.017 0.020 0.021 0.025 0.030 0.036 1.043
F0.006 0.007 0.010 0.014 0.017 0.020 0.022 0.025 0.028 0.031 0.037 1.047 1.059
Alpha
Code
Reamers
www.precisiondormer.com
Feed Rate Chart
www.precisiondormer.com 439
6 8 10 16 20 25 32 40 60 80
A 0.03 0.04 0.05 0.06 0.08 0.09 0.10 0.12 0.14 0.16
B 0.04 0.05 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
C 0.05 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 0.22
D 0.06 0.08 0.10 0.12 0.15 0.18 0.20 0.22 0.25 0.28
E 0.08 0.10 0.12 0.15 0.18 0.20 0.25 0.27 0.30 0.32
F 0.09 0.11 0.13 0.16 0.19 0.21 0.26 0.29 0.33 0.36
G 0.10 0.12 0.15 0.18 0.20 0.22 0.28 0.32 0.36 0.40
H 0.12 0.15 0.18 0.20 0.22 0.25 0.30 0.35 0.40 0.45
Alpha
Code
Countersinks, Counterbores - Feed in MM per Revolution Ø Diameter
1/4 5/16 5/64 5/8 25/32 1” 1-1/4 1-1/2 2-3/8 3”
A 0.001 0.002 0.002 0.002 0.003 0.004 0.004 0.005 0.006 0.006
B 0.002 0.002 0.002 0.003 0.004 0.005 0.006 0.006 0.007 0.008
C 0.002 0.002 0.003 0.004 0.005 0.006 0.006 0.007 0.008 0.009
D 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.009 0.010 0.011
E 0.003 0.004 0.005 0.006 0.007 0.008 0.010 0.011 0.012 0.013
F 0.004 0.004 0.005 0.006 0.007 0.008 0.010 0.011 0.013 0.014
G 0.004 0.005 0.006 0.007 0.008 0.009 0.011 0.013 0.014 0.016
H 0.005 0.006 0.007 0.008 0.009 0.010 0.012 0.014 0.016 0.018
Alpha
Code
Countersinks, Counterbores - Feed in Inches per Revolution Ø Diameter
Countersinks, Counterbores
Feed Rate Charts
How To Use This Chart to Find Cutting Feed Rate (IPR):
1. Find your Alpha Code on the AMG Chart (example: 82 C : C is the Alpha Code) .
2. Find the closest diameter for your cutting application on the chart to fi nd your IPR.
4533 4535 4543 4500
443 447 448 449
Ŷ82C Ŷ82C Ŷ82C Ŷ82C
Ŷ66C Ŷ66C Ŷ66C Ŷ66C
Ŷ52C Ŷ52C Ŷ52C Ŷ52C
Ŷ49B Ŷ49B Ŷ49B Ŷ49B
Ɣ30B Ɣ30B Ɣ30B Ɣ30B
Ɣ16A Ɣ16A Ɣ16A Ɣ16A
Ŷ36C Ŷ36C Ŷ36C Ŷ36C
Ɣ20B Ɣ20B Ɣ20B Ɣ20B
Ɣ26B Ɣ26B Ɣ26B Ɣ26B
Ɣ20B Ɣ20B Ɣ20B Ɣ20B
Ɣ52E Ɣ52E Ɣ52E Ɣ52E
Ɣ49D Ɣ49D Ɣ49D Ɣ49D
Ɣ43C Ɣ43C Ɣ43C Ɣ43C
Ɣ36C Ɣ36C Ɣ36C Ɣ36C
Ɣ49C Ɣ49C Ɣ49C Ɣ49C
Ŷ30B Ŷ30B Ŷ30B Ŷ30B
Ɣ16B Ɣ16B Ɣ16B Ɣ16B
Ŷ26D Ŷ26D Ŷ26D Ŷ26D
Ɣ16C Ɣ16C Ɣ16C Ɣ16C
Ɣ10C Ɣ10C Ɣ10C Ɣ10C
Ɣ82D Ɣ82D Ɣ82D Ɣ82D
Ɣ92E Ɣ92E Ɣ92E Ɣ92E
Ɣ82D Ɣ82D Ɣ82D Ɣ82D
Ɣ46D Ɣ46D Ɣ46D Ɣ46D
Coating:
Standard:
Direction of Cut:
Shank:
Reamers
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Reamers
www.precisiondormer.com
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
To calculate IPR, refer to chart on page 438-439.
example: 82 C
82 = SFM
C = Alpha Code to find your Feed Rate
Page # for easy reference
Taper
Shank
Straight
Shank Shank with
Square End
Shank with
Tang Square
Shank
Countersink
Application Counterbore
Application
Icon Guide for Reamers,
Counterbores and
Countersinks
1
1
2
2
3
3
2
2
1
1
3
3
Ŷ = Excellent for Application
Ɣ = Good for Application
440
4
4
Reamers, Counterbores
4700, 4705
Long
461
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ36C
Ɣ20B
Ɣ26B
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ɣ49C
Ŷ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
4702
Short 4703
Short 4706
Short
459 460 461
Ŷ82C Ŷ82C Ŷ82C
Ŷ66C Ŷ66C Ŷ66C
Ŷ52C Ŷ52C Ŷ52C
Ŷ49B Ŷ49B Ŷ49B
Ɣ30B Ɣ30B Ɣ30B
Ɣ16A Ɣ16A Ɣ16A
Ŷ36C Ŷ36C Ŷ36C
Ɣ20B Ɣ20B Ɣ20B
Ɣ26B Ɣ26B Ɣ26B
Ɣ52E Ɣ52E Ɣ52E
Ɣ49D Ɣ49D Ɣ49D
Ɣ43C Ɣ43C Ɣ43C
Ɣ36C Ɣ36C Ɣ36C
Ɣ49C Ɣ49C Ɣ49C
Ŷ30B Ŷ30B Ŷ30B
Ɣ16B Ɣ16B Ɣ16B
Ŷ26D Ŷ26D Ŷ26D
Ɣ16C Ɣ16C Ɣ16C
Ɣ10C Ɣ10C Ɣ10C
Ɣ82D Ɣ82D Ɣ82D
Ɣ92E Ɣ92E Ɣ92E
Ɣ82D Ɣ82D Ɣ82D
Ɣ46D Ɣ46D Ɣ46D
Reamers/Counterbores
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Counterbore Pilot,
4704, Page 463
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Reamers and Counterbores
www.precisiondormer.com 441
4531
450
Ŷ82C
Ŷ66C
Ŷ52C
Ŷ49B
Ɣ30B
Ɣ16A
Ŷ36C
Ɣ20B
Ɣ26B
Ɣ20B
Ɣ52E
Ɣ49D
Ɣ43C
Ɣ36C
Ɣ49C
Ŷ30B
Ɣ16B
Ŷ26D
Ɣ16C
Ɣ10C
Ɣ82D
Ɣ92E
Ɣ82D
Ɣ46D
4587 4591 4588 4600 4537 4536 4532
451 451 452 452 453 454 455
Ŷ59C Ŷ59C Ŷ59C Ŷ59C Ŷ82C Ŷ82C Ŷ82C
Ŷ46C Ŷ46C Ŷ46C Ŷ46C Ŷ66C Ŷ66C Ŷ66C
Ŷ36C Ŷ36C Ŷ36C Ŷ36C Ŷ52C Ŷ52C Ŷ52C
Ŷ33B Ŷ33B Ŷ33B Ŷ33B Ŷ49B Ŷ49B Ŷ49B
Ɣ16B Ɣ16B Ɣ16B Ɣ16B Ɣ30B Ɣ30B Ɣ30B
Ɣ13A Ɣ13A Ɣ13A Ɣ13A Ɣ16A Ɣ16A Ɣ16A
Ŷ26C Ŷ26C Ŷ26C Ŷ26C Ŷ36C Ŷ36C Ŷ36C
Ɣ16B Ɣ16B Ɣ20B Ɣ20B Ɣ20B
Ɣ20B Ɣ20B Ɣ26B Ɣ26B Ɣ26B
Ɣ20B Ɣ20B Ɣ20B
Ŷ46E Ŷ46E Ŷ46E Ŷ46E Ɣ52E Ɣ52E Ɣ52E
Ɣ36D Ɣ36D Ɣ36D Ɣ36D Ɣ49D Ɣ49D Ɣ49D
Ɣ33C Ɣ33C Ɣ33C Ɣ33C Ɣ43C Ɣ43C Ɣ43C
Ɣ30C Ɣ30C Ɣ30C Ɣ30C Ɣ36C Ɣ36C Ɣ36C
Ŷ36C Ŷ36C Ŷ36C Ŷ36C Ŷ49C Ɣ49C Ɣ49C
Ɣ16B Ɣ16B Ɣ16B Ɣ16B Ɣ30B Ŷ30B Ŷ30B
Ɣ13B Ɣ13B Ɣ13B Ɣ13B Ɣ16B Ɣ16B Ɣ16B
Ɣ16D Ɣ16D Ɣ16D Ɣ16D Ŷ26D Ŷ26D Ŷ26D
ƔƔƔƔƔ16C Ɣ16C Ɣ16C
ƔƔƔƔƔ10C Ɣ10C Ɣ10C
Ɣ59D Ɣ59D Ɣ59D Ɣ59D Ɣ82D Ɣ82D Ɣ82D
Ŷ66E Ŷ66E Ŷ66E Ŷ66E Ɣ92E Ɣ92E Ɣ92E
Ɣ59D Ɣ59D Ɣ59D Ɣ59D Ɣ82D Ɣ82D Ɣ82D
Ɣ36D Ɣ36D Ɣ36D Ɣ36D Ɣ46D Ɣ46D Ɣ46D
Ɣ75F Ɣ75F Ɣ75F Ɣ75F
Ɣ59F Ɣ59F Ɣ59F Ɣ59F
Ɣ49E Ɣ49E
Ɣ46D Ɣ46D
Ɣ69B Ɣ69B Ɣ69B Ɣ69B
4579 4608 SS300
SS400
456 456 457
Ŷ59C Ŷ98F Ŷ75C
Ŷ46C Ŷ82E Ŷ46C
Ŷ36C Ŷ66D Ŷ49C
Ŷ33B Ŷ49D Ŷ49B
Ɣ16B Ŷ33B Ɣ36B
Ɣ13A Ɣ20A
Ŷ26C Ɣ26C Ŷ66C
Ɣ16B Ɣ20B Ɣ39B
Ɣ20B Ɣ13A Ɣ39B
Ɣ13A
Ŷ46E Ɣ82F Ŷ108E
Ɣ36D Ɣ49D Ŷ59D
Ɣ33C Ɣ39C Ŷ59C
Ɣ30C Ɣ26C
Ŷ36C Ŷ39C Ŷ69C
Ɣ16B Ŷ33A Ɣ36B
Ɣ13B Ŷ26A
Ɣ16D Ŷ39C Ɣ49D
ƔŶ20B
ƔŶ13A
Ɣ59D Ŷ82D
Ŷ66E Ŷ66F
Ɣ59D Ŷ82F
Ɣ36D Ɣ33D
Ɣ75F Ɣ98G
Ɣ59F Ɣ82F
Ɣ49E Ɣ66F
Ɣ46D Ɣ33F
Ɣ98G
Ɣ69B Ɣ66G
T400
458
Ŷ75F
Ŷ46F
Ŷ49F
Ŷ49D
Ɣ36D
Ŷ66F
Ɣ39D
Ɣ39D
Ŷ108E
Ŷ59H
Ŷ59F
Ŷ69F
Ɣ36D
Ɣ49D
4602
4-Flute 4603
1-Flute G135-G138
3-Flute G154
3-Flute
464 465 465 467
Ŷ98F Ŷ98F Ŷ98F Ŷ98F
Ŷ82E Ŷ82E Ŷ82E Ŷ82E
Ŷ66D Ŷ66D Ŷ66D Ŷ66D
Ŷ49D Ŷ49D Ŷ49D Ŷ49D
Ŷ33B Ŷ33B Ŷ33B Ŷ33B
Ɣ20A Ɣ20A Ɣ20A Ɣ20A
Ɣ26C Ɣ26C Ɣ26C Ɣ26C
Ɣ20B Ɣ20B Ɣ20B Ɣ20B
Ɣ13A Ɣ13A Ɣ13A Ɣ13A
Ɣ82F Ɣ82F Ɣ82F Ɣ82F
Ɣ49D Ɣ49D Ɣ49D Ɣ49D
Ɣ39C Ɣ39C Ɣ39C Ɣ39C
Ɣ26C Ɣ26C Ɣ26C Ɣ26C
Ŷ39C Ŷ39C Ŷ39C Ŷ39C
Ŷ33A Ŷ33A Ŷ33A Ŷ33A
Ŷ26A Ŷ26A Ŷ26A Ŷ26A
Ŷ39C Ŷ39C Ŷ39C Ŷ39C
Ŷ20B Ŷ20B Ŷ20B Ŷ20B
Ŷ13A Ŷ13A Ŷ13A Ŷ13A
Ŷ82D Ŷ82D Ŷ82D Ŷ82D
Ŷ66F Ŷ66F Ŷ66F Ŷ66F
Ŷ82F Ŷ82F Ŷ82F Ŷ82F
Ɣ33D Ɣ33D Ɣ33D Ɣ33D
Ɣ98G Ɣ98G Ɣ98G Ɣ98G
Ɣ82F Ɣ82F Ɣ82F Ɣ82F
Ɣ66F Ɣ66F Ɣ66F Ɣ66F
Ɣ33F Ɣ33F Ɣ33F Ɣ33F
Ɣ98G Ɣ98G Ɣ98G Ɣ98G
Ɣ66G Ɣ66G Ɣ66G Ɣ66G
Material:
Style:
Coating:
Standard:
Direction of Cut:
Application:
Shank:
Countersinks
Surface Feet per Minute (SFM)
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
2.1
2.2
2.3
2.4
3.1
3.2
3.3
3.4
4.1
4.2
4.3
5.1
5.2
5.3
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
8.1
8.2
8.3
9.1
10.1
Hardness
HB
<120
<200
<250
<250
>250<350
>350
49-55HRC
55-63HRC
<250
<250
<300
<300
<150
>150<300
<200
>200<300
<200
<270
>270<350
<150
<270
>270<350
<100
<200
<200
<470
<100
<150
<120
<120
---
---
---
<550
---
Application Material Groups (AMG)
1. Steel
1.1 Magnetic soft steel 12L14, 12L15
1.2 Structural Steel/ case carburising steel 1005-1025, 1214, 1215, A36
1.3 Plain Carbon steel 1030-1060, 1050-1060, 1144-1146
1.4 Alloy steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.5 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.6 Alloy steel/ Hardened and tempered steel 4140,4340,52100,8620 H11-H41,A2,D2,01,P20,420
1.7 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
1.8 Alloy steel Hardened A2-D2, H10-H41, L1-L6, M1-M42, T1
2.Stainless
Steel
2.1 Free machining Stainless Steel 200, 303, 416, 420F, 430F, 440
2.2 Austenitic 301, 302, 304, 316, 321, 330, CUSTOM 455, AM-350
2.3 Ferritic + Austenitic, Martensitic 318-329, 400-446, 15-4PH, 17-4PH. DUPLEX
2.4 Precipitation Hardened 15-5PH, Custom 450 17-4PH
3.Cast Iron
3.1 Lamellar graphite Grey, G10, Gg40, J431C, A48 CLASS 20
3.2 Lamellar graphite Grey, GG25-Gg40, J158, A48 CLASS 40-60
3.3 Nodular graphite/ Malleable Cast Iron A220, A436, A439, A602, Black, GGG40-GGG70
3.4 Nodular graphite/ Malleable Cast Iron Black Gts/Gtw, J434C
4.Titanium
4.1 Titanium, unalloyed Commercially Pure
4.2 Titanium, alloyed 6A14V, 6A14V-2Sn, Monel, Monel K
4.3 Titanium, alloyed 6A14V-4Mo, 7A14V-4Mo, 4911-4967
5.Nickel
5.1 Nickel, unalloyed Commercially Pure, 17644, 200, 5553
5.2 Nickel, alloyed Monel 400, Hastelloy C, Inconel 625, Waspaloy
5.3 Nickel, alloyed Iconel 718,Nimonic 75-95,Rene 41,Iconel 825,A286
6.Copper
6.1 Copper Commercially Pure
6.2 ß-Brass, Bronze 314-340, 350-370
6.3 Į-Brass Alloyed Cu + Al + Fe, Long Chipping
6.4 High Strength Bronze Ampco 18-25
7.Aluminium
Magnesium
7.1 Al, Mg, unalloyed Commercially Pure
7.2 Al alloyed, Si<0.5% 6061 T6, 7075, 314-340
7.3 Al alloyed, Si>0.5%<10% 6061 T6, 380-390
7.4 Al alloyed, Si>10% Mg alloys Magnesium Whisker Reinforced
8.Synthetic
Materials
8.1 Thermoplastics Ultramid, Polystrol
8.2 Thermosetting plastics Bakelit, Pertinax
8.3 Reinforced plastic materials CFK, GFKAFK
9.Hard Mat. 9.1 Cermets (Metal-ceramics) Ferrotic
10.Graphite 10.1 Standard graphite
Reamers
www.precisiondormer.com
How To Use This AMG Chart:
Determine your Workpiece Material. Select Material from the
AMG Chart below.
Use the icons to fi nd other Product Features.
Find the Surface Feet Per Minute (SFM) and Alpha Code.
To calculate IPR, refer to chart on page 438-439.
example: 82 C
82 = SFM
C = Alpha Code to find your Feed Rate
Page # for easy reference
Taper
Shank
Straight
Shank Shank with
Square End
Shank with
Tang Square
Shank
Countersink
Application Counterbore
Application
Icon Guide for Reamers,
Counterbores and
Countersinks
1
1
2
2
3
3
2
2
1
1
3
3
Ŷ = Excellent for Application
Ɣ = Good for Application
442
4
4
Countersinks
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 443
4533
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch l2
Inch l1
Inch # Flutes EDP #
60 0.0400 0.0390 1/2 2.1/2 4 5010173
59 0.0410 0.0390 1/2 2.1/2 4 5010175
58 0.0420 0.0390 1/2 2.1/2 4 5010177
57 0.0430 0.0390 1/2 2.1/2 4 5010179
56 0.0465 0.0455 1/2 2.1/2 4 5010186
3/64 0.0469 0.0455 1/2 2.1/2 4 5010187
55 0.0520 0.0510 1/2 2.1/2 4 5010198
54 0.0550 0.0510 1/2 2.1/2 4 5010204
53 0.0595 0.0585 1/2 2.1/2 4 5010213
1/16 0.0625 0.0585 1/2 2.1/2 4 5010219
52 0.0635 0.0585 1/2 2.1/2 4 5010221
51 0.0670 0.0660 3/4 3“ 4 5010228
50 0.0700 0.0660 3/4 3“ 4 5010234
49 0.0730 0.0660 3/4 3“ 4 5010240
48 0.0760 0.0720 3/4 3“ 4 5010246
5/64 0.0781 0.0720 3/4 3“ 4 5010251
47 0.0785 0.0720 3/4 3“ 4 5010252
46 0.0810 0.0771 3/4 3“ 4 5010257
45 0.0820 0.0771 3/4 3“ 4 5010259
44 0.0860 0.0810 3/4 3“ 4 5010267
43 0.0890 0.0810 3/4 3“ 4 5010273
42 0.0935 0.0880 3/4 3“ 4 5010282
3/32 0.0938 0.0880 3/4 3“ 4 5010283
41 0.0960 0.0928 7/8 3.1/2 4 5010288
40 0.0980 0.0928 7/8 3.1/2 4 5010292
39 0.0995 0.0928 7/8 3.1/2 4 5010295
38 0.1015 0.0950 7/8 3.1/2 4 5010299
37 0.1040 0.0950 7/8 3.1/2 4 5010304
36 0.1065 0.1030 7/8 3.1/2 4 5010309
7/64 0.1094 0.1030 7/8 3.1/2 4 5010316
35 0.1100 0.1030 7/8 3.1/2 4 5010318
34 0.1110 0.1055 7/8 3.1/2 4 5010320
33 0.1130 0.1055 7/8 3.1/2 4 5010324
32 0.1160 0.1120 7/8 3.1/2 4 5010330
31 0.1200 0.1120 7/8 3.1/2 4 5010338
0.1230 0.1230 0.1120 7/8 3.1/2 4 5010344
ƔChucking Reamer
Ɣ Right Hand Spiral Flute, Straight Flute
Ɣ Alésoirs machine ƔEscariadores de máquina
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
444
4533
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch l2
Inch l1
Inch # Flutes EDP #
0.1240 0.1240 0.1190 7/8 3.1/2 4 5010346
0.1247 0.1247 0.1190 7/8 3.1/2 4 5010349
1/8 0.1250 0.1190 7/8 3.1/2 4 5010350
0.1260 0.1260 0.1190 7/8 3.1/2 4 5010354
30 0.1285 0.1190 7/8 3.1/2 4 5010359
29 0.1360 0.1275 1“ 4“ 4 5010374
28 0.1400 0.1350 1“ 4“ 4 5010383
9/64 0.1410 0.1350 1“ 4“ 4 5010384
27 0.1440 0.1350 1“ 4“ 4 5010391
26 0.1470 0.1430 1“ 4“ 4 5010397
25 0.1495 0.1430 1“ 4“ 4 5010402
24 0.1520 0.1460 1“ 4“ 4 5010407
23 0.1540 0.1460 1“ 4“ 4 5010411
5/32 0.1562 0.1510 1“ 4“ 6 5010416
22 0.1570 0.1510 1“ 4“ 6 5010418
21 0.1590 0.1530 1.1/8 4.1/2 6 5010422
20 0.1610 0.1530 1.1/8 4.1/2 6 5010426
19 0.1660 0.1595 1.1/8 4.1/2 6 5010436
18 0.1695 0.1595 1.1/8 4.1/2 6 5010443
11/64 0.1719 0.1645 1.1/8 4.1/2 6 5010448
17 0.1730 0.1645 1.1/8 4.1/2 6 5010451
16 0.1770 0.1700 1.1/8 4.1/2 6 5010459
15 0.1800 0.1755 1.1/8 4.1/2 6 5010465
14 0.1820 0.1755 1.1/8 4.1/2 6 5010469
13 0.1850 0.1800 1.1/8 4.1/2 6 5010475
0.1855 0.1855 0.1800 1.1/8 4.1/2 6 5010476
0.1865 0.1865 0.1800 1.1/8 4.1/2 6 5010478
0.1870 0.1870 0.1800 1.1/8 4.1/2 6 5010479
3/16 0.1875 0.1800 1.1/8 4.1/2 6 5010480
0.1885 0.1885 0.1800 1.1/8 4.1/2 6 5010482
12 0.1890 0.1800 1.1/8 4.1/2 6 5010483
11 0.1910 0.1860 1.1/4 5“ 6 5010487
10 0.1935 0.1860 1.1/4 5“ 6 5010492
90.1960 0.1895 1.1/4 5“ 6 5010498
80.1990 0.1895 1.1/4 5“ 6 5010504
70.2010 0.1945 1.1/4 5“ 6 5010508
13/64 0.2031 0.1945 1.1/4 5“ 6 5010513
60.2040 0.1945 1.1/4 5“ 6 5010515
50.2055 0.2016 1.1/4 5“ 6 5010518
40.2090 0.2016 1.1/4 5“ 6 5010525
30.2130 0.2075 1.1/4 5“ 6 5010533
7/32 0.2188 0.2075 1.1/4 5“ 6 5010545
20.2210 0.2173 1.1/2 6“ 6 5010550
10.2280 0.2173 1.1/2 6“ 6 5010564
A0.2340 0.2265 1.1/2 6“ 6 5010576
15/64 0.2344 0.2265 1.1/2 6“ 6 5010577
B0.2380 0.2329 1.1/2 6“ 6 5010585
C0.2420 0.2329 1.1/2 6“ 6 5010593
D0.2460 0.2329 1.1/2 6“ 6 5010602
0.2480 0.2480 0.2329 1.1/2 6“ 6 5010606
0.2490 0.2490 0.2400 1.1/2 6“ 6 5010608
0.2495 0.2495 0.2400 1.1/2 6“ 6 5010609
1/4 0.2500 0.2400 1.1/2 6“ 6 5010610
E0.2500 0.2400 1.1/2 6“ 6 5011202
0.2510 0.2510 0.2400 1.1/2 6“ 6 5010612
F0.2570 0.2485 1.1/2 6“ 6 5010619
G0.2610 0.2485 1.1/2 6“ 6 5010622
17/64 0.2656 0.2485 1.1/2 6“ 6 5010623
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 445
4533
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch l2
Inch l1
Inch # Flutes EDP #
H0.2660 0.2485 1.1/2 6“ 6 5010624
I0.2720 0.2485 1.1/2 6“ 6 5010626
J0.2770 0.2485 1.1/2 6“ 6 5010627
K0.2810 0.2485 1.1/2 6“ 6 5010628
9/32 0.2812 0.2485 1.1/2 6“ 6 5010629
L0.2900 0.2792 1.1/2 6“ 6 5010630
M0.2950 0.2792 1.1/2 6“ 6 5010631
19/64 0.2969 0.2792 1.1/2 6“ 6 5010632
N0.3020 0.2792 1.1/2 6“ 6 5010633
0.3100 0.3100 0.2792 1.1/2 6“ 6 5010636
0.3115 0.3115 0.2792 1.1/2 6“ 6 5010638
0.3120 0.3120 0.2792 1.1/2 6“ 6 5010639
5/16 0.3125 0.2792 1.1/2 6“ 6 5010640
0.3135 0.3135 0.2792 1.1/2 6“ 6 5010642
O0.3160 0.2792 1.1/2 6“ 6 5010645
P0.3230 0.2792 1.1/2 6“ 6 5010647
21/64 0.3281 0.2792 1.1/2 6“ 6 5010648
Q0.3320 0.2792 1.1/2 6“ 6 5010649
R0.3390 0.2792 1.1/2 6“ 6 5010650
11/32 0.3438 0.2792 1.1/2 6“ 6 5010651
S0.3480 0.3105 1.3/4 7“ 6 5010652
T0.3580 0.3105 1.3/4 7“ 6 5010653
23/64 0.3594 0.3105 1.3/4 7“ 6 5010654
U0.3680 0.3105 1.3/4 7“ 6 5010655
0.3730 0.3730 0.3105 1.3/4 7“ 6 5010658
0.3740 0.3740 0.3105 1.3/4 7“ 6 5010659
0.3745 0.3745 0.3105 1.3/4 7“ 6 5010660
3/8 0.3750 0.3105 1.3/4 7“ 6 5010661
0.3760 0.3760 0.3105 1.3/4 7“ 6 5010662
V0.3770 0.3105 1.3/4 7“ 6 5010663
W0.3860 0.3105 1.3/4 7“ 6 5010665
25/64 0.3910 0.3105 1.3/4 7“ 6 5010666
X0.3970 0.3105 1.3/4 7“ 6 5010667
Y0.4040 0.3105 1.3/4 7“ 6 5010668
13/32 0.4062 0.3105 1.3/4 7“ 6 5010670
Z0.4130 0.3730 1.3/4 7“ 6 5010671
27/64 0.4219 0.3730 1.3/4 7“ 6 5010672
0.4355 0.4355 0.3730 1.3/4 7“ 6 5010673
0.4365 0.4365 0.3730 1.3/4 7“ 6 5010674
0.4370 0.4370 0.3730 1.3/4 7“ 6 5010675
7/16 0.4375 0.3730 1.3/4 7“ 6 5010676
0.4385 0.4385 0.3730 1.3/4 7“ 6 5010677
29/64 0.4531 0.3730 1.3/4 7“ 6 5010678
15/32 0.4688 0.3730 1.3/4 7“ 6 5010679
31/64 0.4844 0.4355 2“ 8“ 6 5010680
0.4980 0.4980 0.4355 2“ 8“ 6 5010681
0.4990 0.4990 0.4355 2“ 8“ 6 5010682
0.4995 0.4995 0.4355 2“ 8“ 6 5010683
1/2 0.5000 0.4355 2“ 8“ 6 5010684
0.5010 0.5010 0.4355 2“ 8“ 6 5010685
33/64 0.5156 0.4355 2“ 8“ 6 5010690
17/32 0.5312 0.4355 2“ 8“ 6 5010691
35/64 0.5469 0.4355 2“ 8“ 8 5010692
9/16 0.5625 0.4355 2“ 8“ 8 5010693
37/64 0.5781 0.4355 2“ 8“ 8 5010694
19/32 0.5938 0.4355 2“ 8“ 8 5010695
39/64 0.6094 0.5620 2.1/4 9“ 8 5010696
5/8 0.6250 0.5620 2.1/4 9“ 8 5010698
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
446
4533 - 4533S
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch l2
Inch l1
Inch # Flutes EDP #
41/64 0.6410 0.5620 2.1/4 9“ 8 5010700
21/32 0.6562 0.5620 2.1/4 9“ 8 5010701
43/64 0.6719 0.5620 2.1/4 9“ 8 5010702
11/16 0.6875 0.5620 2.1/4 9“ 8 5010703
45/64 0.7031 0.5620 2.1/4 9“ 8 5010704
23/32 0.7188 0.5620 2.1/4 9“ 8 5010705
47/64 0.7344 0.6245 2.1/2 9.1/2 8 5010706
3/4 0.7500 0.6245 2.1/2 9.1/2 8 5010708
49/64 0.7656 0.6245 2.1/2 9.1/2 8 5010710
25/32 0.7812 0.6245 2.1/2 9.1/2 8 5010711
51/64 0.7969 0.6245 2.1/2 9.1/2 8 5010712
13/16 0.8125 0.6245 2.1/2 9.1/2 8 5010713
53/64 0.8281 0.6245 2.1/2 9.1/2 8 5010714
27/32 0.8438 0.6245 2.1/2 9.1/2 8 5010715
55/64 0.8594 0.7495 2.5/8 10“ 8 5010716
7/8 0.8750 0.7495 2.5/8 10“ 8 5010717
57/64 0.8910 0.7495 2.5/8 10“ 8 5010718
29/32 0.9062 0.7495 2.5/8 10“ 8 5010719
59/64 0.9219 0.7495 2.5/8 10“ 8 5010720
15/16 0.9375 0.7495 2.5/8 10“ 8 5010721
61/64 0.9531 0.7495 2.5/8 10“ 8 5010722
31/32 0.9688 0.7495 2.5/8 10“ 8 5010723
63/64 0.9844 0.8745 2.3/4 10.1/2 8 5010724
1“ 1.0000 0.8745 2.3/4 10.1/2 8 5010725
1.1/16 1.0625 0.8745 2.3/4 10.1/2 8 5010726
1.1/8 1.1250 0.8745 2.7/8 11“ 10 5010727
1.3/16 1.1875 0.9995 2.7/8 11“ 10 5010728
1.1/4 1.2500 0.9995 3“ 11.1/2 10 5010729
1.5/16 1.3125 0.9995 3“ 11.1/2 10 5010103
1.3/8 1.3750 0.9995 3.1/4 12“ 10 5010731
1.7/16 1.4375 1.2495 3.1/4 12“ 10 5010105
1.1/2 1.5000 1.2495 3.1/2 12.1/2 10 5010733
4533S
Type Style #
in Set Sizes EDP #
50 4533 29 1/16-1/2 x 64ths 5011089
51 4533 14 1/8-1/2 x 16ths, decimal 0.001“ over and 0.001“ under 5011090
52 4533 60 N1 - N60 5011091
53 4533 26 A - Z 5011092
ƔChucking Reamer Sets In Steel Cases ƔCoffret d’alésoirs machine ƔJuego de escariador de máquina en acero
cementado
4533
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 447
4535
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch l2
Inch l1
Inch # Flutes EDP #
1/16 0.0625 0.0585 1/2 2.1/2 4 5010054
5/64 0.0781 0.0720 3/4 3“ 4 5010055
3/32 0.0938 0.0880 3/4 3“ 4 5010056
7/64 0.1094 0.1030 7/8 3.1/2 4 5010057
1/8 0.1250 0.1190 7/8 3.1/2 4 5010058
9/64 0.1410 0.1350 1“ 4“ 4 5010059
5/32 0.1562 0.1510 1“ 4“ 6 5010060
11/64 0.1719 0.1645 1.1/8 4.1/2 6 5010061
3/16 0.1875 0.1800 1.1/8 4.1/2 6 5010062
13/64 0.2031 0.1945 1.1/4 5“ 6 5010063
7/32 0.2188 0.2075 1.1/4 5“ 6 5010064
15/64 0.2344 0.2265 1.1/2 6“ 6 5010065
1/4 0.2500 0.2400 1.1/2 6“ 6 5010066
17/64 0.2656 0.2485 1.1/2 6“ 6 5010067
9/32 0.2812 0.2485 1.1/2 6“ 6 5010068
19/64 0.2969 0.2792 1.1/2 6“ 6 5010069
5/16 0.3125 0.2792 1.1/2 6“ 6 5010070
21/64 0.3281 0.2792 1.1/2 6“ 6 5010071
11/32 0.3438 0.2792 1.1/2 6“ 6 5010072
23/64 0.3594 0.3105 1.3/4 7“ 6 5010073
3/8 0.3750 0.3105 1.3/4 7“ 6 5010074
25/64 0.3910 0.3105 1.3/4 7“ 6 5010075
13/32 0.4062 0.3105 1.3/4 7“ 6 5010076
27/64 0.4219 0.3730 1.3/4 7“ 6 5010077
7/16 0.4375 0.3730 1.3/4 7“ 6 5010078
29/64 0.4531 0.3730 1.3/4 7“ 6 5010079
15/32 0.4688 0.3730 1.3/4 7“ 6 5010080
31/64 0.4844 0.4355 2“ 8“ 6 5010081
1/2 0.5000 0.4355 2“ 8“ 6 5010082
17/32 0.5312 0.4355 2“ 8“ 6 5010083
9/16 0.5625 0.4355 2“ 8“ 8 5010084
19/32 0.5938 0.4355 2“ 8“ 8 5010085
5/8 0.6250 0.5620 2.1/4 9“ 8 5010086
21/32 0.6562 0.5620 2.1/4 9“ 8 5010087
11/16 0.6875 0.5620 2.1/4 9“ 8 5010088
23/32 0.7188 0.5620 2.1/4 9“ 8 5010089
ƔChucking Reamer
Ɣ Right Hand Spiral Flute
Ɣ Alésoirs machine ƔEscariadores de máquina
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
448
4535 - 4543
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch l2
Inch l1
Inch # Flutes EDP #
3/4 0.7500 0.6245 2.1/2 9.1/2 8 5010090
25/32 0.7812 0.6245 2.1/2 9.1/2 8 5010091
13/16 0.8125 0.6245 2.1/2 9.1/2 8 5010092
27/32 0.8438 0.6245 2.1/2 9.1/2 8 5010093
7/8 0.8750 0.7495 2.5/8 10“ 8 5010094
29/32 0.9062 0.7495 2.5/8 10“ 8 5010095
15/16 0.9375 0.7495 2.5/8 10“ 8 5010096
31/32 0.9688 0.7495 2.5/8 10“ 8 5010097
1“ 1.0000 0.8745 2.3/4 10.1/2 8 5010098
1.1/16 1.0625 0.8745 2.3/4 10.1/2 8 5010099
1.1/8 1.1250 0.8745 2.7/8 11“ 10 5010100
1.3/16 1.1875 0.9995 2.7/8 11“ 10 5010101
1.1/4 1.2500 0.9995 3“ 11.1/2 10 5010102
1.3/8 1.3750 0.9995 3.1/4 12“ 10 5010104
1.1/2 1.5000 1.2495 3.1/2 12.1/2 10 5010106
4543
4535
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch l2
Inch l1
Inch # Flutes EDP #
1/16 0.0625 0.0585 1/2 2.1/2 4 5010001
3/32 0.0938 0.0880 3/4 3“ 4 5010003
1/8 0.1250 0.1190 7/8 3.1/2 4 5010005
5/32 0.1562 0.1510 1“ 4“ 6 5010007
3/16 0.1875 0.1800 1.1/8 4.1/2 6 5010009
7/32 0.2188 0.2075 1.1/4 5“ 6 5010011
1/4 0.2500 0.2400 1.1/2 6“ 6 5010013
9/32 0.2812 0.2485 1.1/2 6“ 6 5010015
5/16 0.3125 0.2792 1.1/2 6“ 6 5010017
11/32 0.3438 0.2792 1.1/2 6“ 6 5010019
3/8 0.3750 0.3100 1.3/4 7“ 6 5010021
13/32 0.4062 0.3100 1.3/4 7“ 6 5010023
7/16 0.4375 0.3730 1.3/4 7“ 6 5010025
15/32 0.4688 0.3730 1.3/4 7“ 6 5010027
1/2 0.5000 0.4355 2“ 8“ 6 5010029
ƔChucking Reamer
Ɣ Left Hand Spiral Flute
Ɣ Alésoirs machine LH hélicoidaux ƔEscariadores de máquina estrias en
espiral LH
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 449
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch # Flutes EDP #
1/8 0.1250 1.1/2 3“ 6 5010928
5/32 0.1562 1.5/8 3.1/4 6 5010929
3/16 0.1875 1.3/4 3.1/2 6 5010930
7/32 0.2187 1.7/8 3.3/4 6 5010931
1/4 0.2500 2“ 4“ 6 5010932
9/32 0.2813 2.1/8 4.1/4 6 5010933
5/16 0.3125 2.1/4 4.1/2 6 5010934
11/32 0.3437 2.3/8 4.3/4 6 5010935
3/8 0.3750 2.1/2 5“ 6 5010936
13/32 0.4062 2.5/8 5.1/4 6 5010937
7/16 0.4375 2.3/4 5.1/2 6 5010938
15/32 0.4688 2.7/8 5.3/4 6 5010939
1/2 0.5000 3“ 6“ 6 5010940
17/32 0.5312 3.1/8 6.1/4 6 5010941
9/16 0.5625 3.1/4 6.1/2 8 5010942
19/32 0.5938 3.3/8 6.3/4 8 5010943
5/8 0.6250 3.1/2 7“ 8 5010944
21/32 0.6562 3.11/16 7.3/8 8 5010945
11/16 0.6875 3.7/8 7.3/4 8 5010946
23/32 0.7188 4.1/16 8.1/8 8 5010947
3/4 0.7500 4.3/16 8.3/8 8 5010948
7/8 0.8750 4.7/8 9.3/4 8 5010950
1“ 1.0000 5.7/16 10.7/8 8 5010952
1.1/8 1.1250 5.13/16 11.5/8 10 5010953
1.1/4 1.2500 6.1/8 12.1/4 10 5010954
1.3/8 1.3750 6.5/16 12.5/8 10 5010955
1.1/2 1.5000 6.1/2 13 10 5010956
4500
ƔHand Reamer Ɣ Alésoir à main ƔEscariador de mano
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
450
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
1.3/4 1.7500 1.1/4 2.3/8 13.1/2 10 5010812
1.13/16 1.8125 1.1/2 2.3/8 13.1/2 10 5010813
1.7/8 1.8750 1.1/2 2.1/2 14“ 12 5010814
1.15/16 1.9375 1.1/2 2.1/2 14“ 12 5010815
2“ 2.0000 1.1/2 2.1/2 14“ 12 5010816
4531
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch
d2
Ø
Inch l2
Inch l1
Inch # Flutes EDP #
3/8 0.3750 5/16 3/4 7“ 6 5011204
13/32 0.4062 5/16 3/4 7“ 6 5011205
7/16 0.4375 3/8 7/8 7“ 6 5010778
15/32 0.4687 3/8 7/8 7“ 6 5010779
1/2 0.5000 7/16 1“ 8“ 6 5010780
17/32 0.5312 7/16 1“ 8“ 6 5010781
9/16 0.5625 7/16 1.1/8 8“ 6 5010782
19/32 0.5938 7/16 1.1/8 8“ 6 5010783
5/8 0.6250 9/16 1.1/4 9“ 6 5010784
21/32 0.6562 9/16 1.1/4 9“ 6 5010785
11/16 0.6875 9/16 1.1/4 9“ 6 5010786
23/32 0.7188 9/16 1.1/4 9“ 6 5010787
3/4 0.7500 5/8 1.3/8 9.1/2 6 5010788
25/32 0.7812 5/8 1.3/8 9.1/2 6 5010789
13/16 0.8125 5/8 1.3/8 9.1/2 6 5010790
27/32 0.8438 5/8 1.3/8 9.1/2 6 5010791
7/8 0.8750 3/4 1.1/2 10“ 6 5010792
29/32 0.9062 3/4 1.1/2 10“ 6 5010793
15/16 0.9375 3/4 1.1/2 10“ 6 5010794
31/32 0.9688 3/4 1.1/2 10“ 6 5010795
1“ 1.0000 7/8 1.1/8 10.1/2 8 5010796
1.1/32 1.0312 7/8 1.5/8 10.1/2 8 5010797
1.1/16 1.0625 7/8 1.5/8 10.1/2 8 5010798
1.3/32 1.0937 7/8 1.5/8 10.1/2 8 5010799
1.1/8 1.1250 7/8 1.3/4 11“ 8 5010800
1.5/32 1.1562 7/8 1.3/4 11“ 8 5010801
1.3/16 1.1875 1“ 1.3/4 11“ 8 5010802
1.7/32 1.2187 1“ 1.3/4 11“ 8 5010803
1.1/4 1.2500 1“ 1.7/8 11.1/2 8 5010804
1.5/16 1.3125 1“ 1.7/8 11.1/2 8 5010805
1.3/8 1.3750 1“ 2“ 12“ 8 5010806
1.7/16 1.4375 1.1/4 2“ 12“ 10 5010807
1.1/2 1.5000 1.1/4 2.1/8 12.1/2 10 5010808
1.9/16 1.5625 1.1/4 2.1/8 12.1/2 10 5010809
1.5/8 1.6250 1.1/4 2.1/4 13“ 10 5010810
1.11/16 1.6875 1.1/4 2.1/4 13“ 10 5010811
ƔChucking Reamer, Expansion Ɣ Alésoirs machine ƔEscariadores de máquina
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 451
4587 - 4591
4587
Ŷ
Ɣ
nom
Ød1 small
Ø
Inch
d1 large
Ø
Inch
d2
Ø
Inch l2
Inch l1
Inch # Flutes EDP #
00.1287 0.1638 11/64 1.11/16 2.15/16 6 5011129
10.1447 0.1798 3/16 1.11/16 2.15/16 6 5011130
20.1600 0.201 13/64 1.15/16 3.3/16 6 5011131
30.1813 0.2294 15/64 2.5/16 3.11/16 6 5011132
40.2071 0.2600 17/64 2.9/16 4.1/16 6 5011133
50.2410 0.2994 5/16 2.13/16 4.5/16 6 5011134
60.2773 0.354 23/64 3.11/16 5.7/16 6 5011135
70.3297 0.422 13/32 4.7/16 6.5/16 6 5011136
80.3971 0.505 7/16 5.3/16 7.3/16 6 5011137
90.4800 0.6066 9/16 6.1/16 8.5/16 8 5011138
10 0.5799 0.7216 5/8 6.13/16 9.5/16 8 5011139
Ɣ Taper Pin Reamer (Taper: 1/4” per foot) Ɣ Alésoir machine cône morse conique ƔEscariadores para pasadores cónicos
4591
Ŷ
Ɣ
nom
Ø
d1 small
Ø
Inch
d1 large
Ø
Inch
d2
Ø
Inch
l2
Inch
l1
Inch # Flutes EDP #
00.1287 0.1638 11/64 1.11/16 2.15/16 6 5011146
10.1447 0.1798 3/16 1.11/16 2.15/16 6 5011147
20.1600 0.201 13/64 1.15/16 3.3/16 6 5011148
30.1813 0.2294 15/64 2.5/16 3.11/16 6 5011149
40.2071 0.2600 17/64 2.9/16 4.1/16 6 5011150
50.2410 0.2994 5/16 2.13/16 4.5/16 6 5011151
60.2773 0.354 23/64 3.11/16 5.7/16 6 5011152
70.3297 0.422 13/32 4.7/16 6.5/16 6 5011153
80.3971 0.505 7/16 5.3/16 7.3/16 6 5011154
90.4800 0.6066 9/16 6.1/16 8.5/16 8 5011155
10 0.5799 0.7216 5/8 6.13/16 9.5/16 8 5011156
Ɣ Taper Pin Reamer, Left Hand Spiral Flute
Ɣ (Taper: 1/4” per foot)
Ɣ Alésoir machine cône morse conique ƔEscariadores para pasadores cónicos
small
small
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
452
4588
Ŷ
Ɣ
nom
Ø
d1 small
Ø
Inch
d1 large
Ø
Inch
d2
Ø
Inch l2
Inch l1
Inch # Flutes EDP #
7/0 0.0497 0.0666 5/64 13/16 1.13/16 2 5011157
6/0 0.0611 0.0810 3/32 15/16 1.15/16 2 5011158
5/0 0.0719 0.0966 7/64 1.3/16 2.3/16 2 5011159
4/0 0.0869 0.1142 1/8 1.5/16 2.5/16 2 5011160
3/0 0.1029 0.1300 9/64 1.5/16 5.5/16 2 5011161
2/0 0.1137 0.1462 5/32 1.9/16 2.9/16 3 5011162
00.1287 0.1638 11/64 1.11/16 5.15/16 3 5011163
10.1447 0.1798 3/16 1.11/16 2.15/16 3 5011164
20.1600 0.2010 13/64 1.15/16 3.3/16 3 5011165
30.1813 0.2294 15/64 2.5/16 3.11/16 3 5011166
40.2071 0.2600 17/64 2.9/16 4.1/16 3 5011167
50.2410 0.2994 5/16 2.13/16 4.5/16 3 5011168
60.2773 0.3540 23/64 3.11/16 5.7/16 3 5011169
70.3297 0.4220 13/32 4.7/16 6.5/16 3 5011170
80.3971 0.5050 7/16 5.3/16 7.3/16 3 5011171
90.4800 0.6066 9/16 6.1/16 8.5/16 4 5011172
10 0.5799 0.7216 5/8 6.13/16 9.5/16 4 5011173
4588 - 4600
Ɣ Taper Pin Reamer, Left Hand Spiral Flute
Ɣ (Taper: 1/4” per foot)
Ɣ Alésoir machine cône morse conique ƔEscariadores para pasadores cónicos
Ŷ
Ɣ
nom
Ø
Inch
d1 small
Ø
Inch
d1 large
Ø
Inch
d2
Ø
Inch l2
Inch l1
Inch Square Size
mm # Flutes EDP #
1/8 0.3160 0.3620 0.4375 3/4 2.1/8 0.3280 6 1810007
1/4 0.4060 0.4720 0.5625 1.1/16 2.7/16 0.4210 6 1810008
3/8 0.5400 0.6060 0.7000 1.1/16 2.9/16 0.5310 8 1810009
1/2 0.6650 0.7510 0.6875 1.3/8 3.1/8 0.5150 8 1810010
3/4 0.8760 0.9620 0.9063 1.3/8 3.1/4 0.6790 10 1810011
1“ 1.1030 1.2120 1.1250 1.3/4 3.3/4 0.8430 10 1810012
1.1/4 1.4440 1.5530 1.3125 1.3/4 4“ 0.9840 10 1810013
1.1/2 1.6840 1.7930 1.5000 1.3/4 4.1/4 1.1250 10 1810014
2“ 2.1590 2.2680 1.8750 1.3/4 4.1/2 1.4060 12 1810015
4600
Ɣ Taper Pin Reamer, Left Hand Spiral Flute
Ɣ (Taper: 1/4” per foot)
Ɣ Alésoir machine cône morse conique ƔEscariadores para pasadores cónicos
small
small
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 453
4537
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch MTS l2
Inch l1
Inch # Flutes EDP #
1/4 0.2500 1 1.1/2 6“ 6 5010140
5/16 0.3125 1 1.1/2 6“ 6 5010142
3/8 0.3750 1 1.3/4 7“ 6 5010144
7/16 0.4375 1 1.3/4 7“ 6 5010146
1/2 0.5000 1 2“ 8“ 6 5010148
9/16 0.5625 1 2“ 8“ 8 5010150
5/8 0.6250 2 2.1/4 9“ 8 5010152
11/16 0.6875 2 2.1/4 9“ 8 5010154
3/4 0.7500 2 2.1/2 9.1/2 8 5010156
13/16 0.8125 2 2.1/2 9.1/2 8 5010158
7/8 0.8750 2 2.5/8 10“ 8 5010160
15/16 0.9375 3 2.5/8 10“ 8 5010162
1“ 1.0000 3 2.3/4 10.1/2 8 5010164
1.1/16 1.0625 3 2.3/4 10.1/2 8 5010165
1.1/8 1.1250 3 2.7/8 11“ 10 5010166
1.3/16 1.1875 3 2.7/8 11“ 10 5010167
1.1/4 1.2500 4 3“ 11.1/2 10 5010168
1.5/16 1.3125 4 3“ 11.1/2 10 5010169
1.3/8 1.3750 4 3.1/4 12“ 10 5010170
1.7/16 1.4375 4 3.1/4 12“ 10 5010171
1.1/2 1.5000 4 3.1/2 12.1/2 10 5010172
ƔChucking Reamer
Ɣ Taper Shank Right Hand Spiral Flute
Ɣ Alésoirs machine ƔEscariadores de máquina
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
454
4536
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch MTS l2
Inch l1
Inch # Flutes EDP #
1/4 0.2500 1 1.1/2 6“ 6 5010734
9/32 0.2813 1 1.1/2 6“ 6 5010735
5/16 0.3125 1 1.1/2 6“ 6 5010736
11/32 0.3437 1 1.1/2 6“ 6 5010737
3/8 0.3750 1 1.3/4 7“ 6 5010738
13/32 0.4062 1 1.3/4 7“ 6 5010739
7/16 0.4375 1 1.3/4 7“ 6 5010740
15/32 0.4687 1 1.3/4 7“ 6 5010741
1/2 0.5000 1 2“ 8“ 6 5010742
17/32 0.5312 1 2“ 8“ 6 5010743
9/16 0.5625 1 2“ 8“ 8 5010744
19/32 0.5938 1 2“ 8“ 8 5010745
5/8 0.6250 2 2.1/4 9“ 8 5010746
21/32 0.6562 2 2.1/4 9“ 8 5010747
11/16 0.6875 2 2.1/4 9“ 8 5010748
23/32 0.7188 2 2.1/4 9“ 8 5010749
3/4 0.7500 2 2.1/2 9.1/2 8 5010750
25/32 0.7812 2 2.1/2 9.1/2 8 5010751
13/16 0.8125 2 2.1/2 9.1/2 8 5010752
27/32 0.8438 2 2.1/2 9.1/2 8 5010753
7/8 0.8750 2 2.5/8 10“ 8 5010754
29/32 0.9062 2 2.5/8 10“ 8 5010755
15/16 0.9375 3 2.5/8 10“ 8 5010756
31/32 0.9688 3 2.5/8 10“ 8 5010757
1“ 1.0000 3 2.3/4 10.1/2 8 5010758
1.1/16 1.0625 3 2.3/4 10.1/2 8 5010759
1.1/8 1.1250 3 2.7/8 11“ 10 5010760
1.3/16 1.1875 3 2.7/8 11“ 10 5010761
1.1/4 1.2500 4 3“ 11.1/2 10 5010762
1.5/16 1.3125 4 3“ 11.1/2 10 5010763
1.3/8 1.3750 4 3.1/4 12“ 10 5010764
1.7/16 1.4375 4 3.1/4 12“ 10 5010765
1.1/2 1.5000 4 3.1/2 12.1/2 10 5010766
ƔChucking Reamer
Ɣ Taper Shank
Ɣ Alésoirs machine ƔEscariadores de máquina
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 455
d1
Ø
Inch
d1
decimal
Inch MTS
l2
Inch
l1
Inch # Flutes
EDP #
or
e-Code
2“ 2.0000 5 2.1/2 14“ 12 5010858
2.1/8 2.1250 5 2.1/4 14.1/2 12 5010860
2.1/4 2.2500 5 2.1/4 14.1/2 12 5010862
2.3/8 2.3750 5 3“ 15 12 5010864
2.1/2 2.5000 5 3“ 15 12 5010866
4532
Ŷ
Ɣ
d1
Ø
Inch
d1
decimal
Inch MTS l2
Inch l1
Inch # Flutes EDP #
3/8 0.3750 1 3/4 7“ 6 5011206
13/32 0.4062 1 3/4 7“ 6 5011207
7/16 0.4375 1 7/8 7“ 6 5010820
15/32 0.4687 1 7/8 7“ 6 5010821
1/2 0.5000 1 1“ 8“ 6 5010822
17/32 0.5312 1 1“ 8“ 6 5010823
9/16 0.5625 1 1.1/8 8“ 6 5010824
19/32 0.5938 1 1.1/8 8“ 6 5010825
5/8 0.6250 2 1.1/4 9“ 6 5010826
21/32 0.6562 2 1.1/4 9“ 6 5010827
11/16 0.6875 2 1.1/4 9“ 6 5010828
23/32 0.7188 2 1.1/4 9“ 6 5010829
3/4 0.7500 2 1.3/8 9.1/2 6 5010830
25/32 0.7812 2 1.3/8 9.1/2 6 5010831
13/16 0.8125 2 1.3/8 9.1/2 6 5010832
27/32 0.8438 2 1.3/8 9.1/2 6 5010833
7/8 0.8750 2 1.1/2 10“ 6 5010834
29/32 0.9062 2 1.1/2 10“ 6 5010835
15/16 0.9375 3 1.1/2 10“ 6 5010836
31/32 0.9688 3 1.1/2 10“ 6 5010837
1“ 1.0000 3 1.5/8 10.1/2 8 5010838
1.1/32 1.0312 3 1.5/8 10.1/2 8 5010839
1.1/16 1.0625 3 1.5/8 10.1/2 8 5010840
1.3/32 1.0937 3 1.5/8 10.1/2 8 5010841
1.1/8 1.1250 3 1.3/4 11“ 8 5010842
1.5/32 1.1562 3 1.3/4 11“ 8 5010843
1.3/16 1.1875 3 1.3/4 11“ 8 5010844
1.7/32 1.2187 3 1.3/4 11“ 8 5010845
1.1/4 1.2500 4 1.7/8 11.1/2 8 5010846
1.5/16 1.3125 4 1.7/8 11.1/2 8 5010847
1.3/8 1.3750 4 2“ 12“ 8 5010848
1.7/16 1.4375 4 2“ 12“ 10 5010849
1.1/2 1.5000 4 2.1/8 12.1/2 10 5010850
1.5/8 1.6250 4 2.1/4 13“ 10 5010852
1.3/4 1.7500 5 2.3/8 13.1/2 10 5010854
1.7/8 1.8750 5 2.1/2 14“ 12 5010856
ƔChucking Reamer
Ɣ Taper Shank Expansion
Ɣ Alésoirs machine ƔEscariadores de máquina
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
456
4579 - 4608
4579
Ŷ
Ɣ
d1
Ø
Inch
dsmall
Ø
Inch
dlarge
Ø
Inch MTS l2
Inch l1
Inch #
Flutes EDP #
d1
Ø
Inch
dsmall
Ø
Inch
dlarge
Ø
Inch MTS l2
Inch l1
Inch #
Flutes EDP #
ƔBridge Reamer
Ɣ Taper shank, RIght-hand spiral fl ute
Ɣ Alésoirs de chaudronnerie queue cône morse ƔEscariador de mango cónico
4608
Ŷ
Ɣ
d1
Ø
Inch r
angle
d2
Ø
Inch l2
Inch l1
Inch #
Flutes EDP #
1/4 100 3/16 3/4 1.1/2 3 5011108
3/8 100 1/4 7/8 1.3/4 3 5011109
1/2 100 3/8 1“ 2“ 3 5011110
5/8 100 3/8 1“ 2.1/4 3 5011111
3/4 100 1/2 1.1/4 2.5/8 3 5011112
1/4 60 3/16 3/4 1.1/2 3 5011093
3/8 60 1/4 7/8 1.3/4 3 5011094
1/2 60 3/8 1“ 2“ 3 5011095
5/8 60 3/8 1“ 2.1/4 3 5011096
3/4 60 1/2 1.1/4 2.5/8 3 5011097
d1
Ø
Inch r
angle
d2
Ø
Inch l2
Inch l1
Inch #
Flutes EDP #
1/4 82 3/16 3/4 1.1/2 3 5011098
3/8 82 1/4 7/8 1.3/4 3 5011099
1/2 82 3/8 1“ 2“ 3 5011100
5/8 82 3/8 1“ 2.1/4 3 5011101
3/4 82 1/2 1.1/4 2.5/8 3 5011102
1/4 90 3/16 3/4 1.1/2 3 5011103
3/8 90 1/4 7/8 1.3/4 3 5011104
3/4 90 1/2 1.1/4 2.5/8 3 5011107
1/2 90 3/8 1“ 2“ 3 5011105
5/8 90 3/8 1“ 2.1/4 3 5011106
ƔCenter reamer
Ɣ3-fl ute countersink
Ɣ 60°, 82° and 100° included angles
1/2 9/32 1/2 2 5.1/8 9 4 5011056
9/16 11/32 9/16 2 5.1/8 9 4 5011057
5/8 3/8 5/8 2 6.1/8 10 4 5011058
11/16 25/64 11/16 3 7.1/8 11.3/4 4 5011059
3/4 7/16 3/4 3 7.3/8 12 4 5011060
13/16 1/2 13/16 3 7.3/8 12 4 5011061
7/8 9/16 7/8 3 7.3/8 12 4 5011062
1.5/16 1“ 1.5/16 4 7.3/8 13 4 5011069
1“ 11/16 1“ 3 7.3/8 12 4 5011064
15/16 5/8 15/16 3 7.3/8 12 4 5011063
1.1/8 13/16 1.1/8 3 7.3/8 12 4 5011066
1.1/16 3/4 1.1/16 3 7.3/8 12 4 5011065
1.1/4 15/16 1.1/4 4 7.3/8 13 4 5011068
1.3/16 7/8 1.3/16 3 7.3/8 12 4 5011067
7/16 1/4 7/16 2 4.3/8 8.1/4 4 5011055
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 457
SS300 - SS400
ƔCore Drill
Ɣ Taper length, 3-fl ute
Ɣ Forets aléseurs 3 lèvres Queue cylindrique ƔBrocas escariadoras
d1
Ø
Inch
d1
decimal
Inch l2
Inch l1
Inch EDP #
1/4 0.2500 3.3/4 6.1/8 054016
9/32 0.2812 3.7/8 6.1/4 054018
5/16 0.3125 4“ 6.3/8 054020
11/32 0.3438 4.1/8 6.1/2 054022
3/8 0.3750 4.1/4 6.3/4 054024
13/32 0.4062 4.3/8 7“ 054026
7/16 0.4375 4.5/8 7.1/4 054028
15/32 0.4688 4.3/4 7.1/2 054030
1/2 0.5000 4.3/4 7.3/4 054032
17/32 0.5312 4.3/4 8“ 054034
9/16 0.5625 4.7/8 8.1/4 054036
19/32 0.5938 4.7/8 8.3/4 054038
5/8 0.6250 4.7/8 8.3/4 054040
21/32 0.6562 5.1/8 9“ 054042
11/16 0.6875 5.3/8 9.1/4 054044
23/32 0.7188 5.5/8 9.1/2 054046
3/4 0.7500 5.7/8 9.3/4 054048
25/32 0.7812 6“ 9.7/8 054050
13/16 0.8125 6.1/8 10“ 054052
27/32 0.8438 6.1/8 10“ 054054
7/8 0.8750 6.1/8 10“ 054056
29/32 0.9062 6.1/8 10“ 054058
15/16 0.9375 6.1/8 10.3/4 054060
31/32 0.9688 6.3/8 11“ 054062
1“ 1.0000 6.3/8 11“ 054100
SS400
ŶƔ
ƔCore Drill
Ɣ Taper length, 4-fl ute
Ɣ Forets aléseurs 4 lèvres Queue cylindrique ƔBrocas escariadoras
ŶƔ
d1
Ø
Inch
d1
decimal
Inch
l2
Inch l1
Inch EDP #
or
e-Code
1/4 0.2500 3.3/4 6.1/8 053016
9/32 0.2812 3.7/8 6.1/4 053018
5/16 0.3125 4“ 6.3/8 053020
11/32 0.3438 4.1/8 6.1/2 053022
3/8 0.3750 4.1/4 6.3/4 053024
13/32 0.4062 4.3/8 7“ 053026
7/16 0.4375 4.5/8 7.1/4 053028
15/32 0.4688 4.3/4 7.1/2 053030
1/2 0.5000 4.3/4 7.3/4 053032
9/16 0.5625 4.7/8 8.1/4 053036
5/8 0.6250 4.7/8 8.3/4 053040
SS300
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
458
T400
Ɣ Forets aléseurs 4 lèvres Queue cylindrique DIN1809ƔCore drill
Ɣ Taper shank, 4-fl ute
ƔBrocas escariadoras
Ŷ
Ɣ
d1Ø
Inch d1decimal
Inch l2
Inch l1
Inch MTS EDP #
1/2 0.5000 4.3/8 8.1/4 2 024532
17/32 0.5312 4.5/8 8.1/2 2 024534
9/16 0.5625 4.7/8 8.3/4 2 024536
19/32 0.5938 4.7/8 8.3/4 2 024538
5/8 0.6250 4.7/8 8.3/4 2 024540
21/32 0.6562 5.1/8 9“ 2 024542
11/16 0.6875 5.3/8 9.1/4 2 024544
23/32 0.7188 5.5/8 9.1/2 2 024546
3/4 0.7500 5.7/8 9.3/4 2 024548
25/32 0.7812 6“ 9.7/8 2 024550
13/16 0.8125 6.1/8 10.3/4 3 024552
27/32 0.8438 6.1/8 10.3/4 3 024554
7/8 0.8750 6.1/8 10.3/4 3 024556
29/32 0.9062 6.1/8 10.3/4 3 024558
15/16 0.9375 6.1/8 10.3/4 3 024560
31/32 0.9688 6.3/8 11“ 3 024562
1“ 1.0000 6.3/8 11“ 3 024600
1.1/32 1.0312 6.1/2 11.1/8 3 024602
1.1/16 1.0625 6.5/8 11.1/4 3 024604
1.3/32 1.0938 6.7/8 12.1/2 4 024606
1.1/8 1.1250 7.1/8 12.3/4 4 024608
1.5/32 1.1562 7.1/4 12.7/8 4 024610
1.3/16 1.1875 7.3/8 13“ 4 024612
1.7/32 1.2188 7.1/2 13.1/8 4 024614
1.1/4 1.2500 7.7/8 13.1/2 4 024616
1.9/32 1.2812 8.1/2 14.1/8 4 024618
1.5/16 1.3125 8.5/8 14.1/4 4 024620
1.11/32 1.3438 8.3/4 14.3/8 4 024622
1.3/8 1.3750 8.7/8 14.1/2 4 024624
1.13/32 1.4062 9“ 14.5/8 4 024626
1.7/16 1.4375 9.1/8 14.3/4 4 024628
1.15/32 1.4688 9.1/4 14.7/8 4 024630
1.1/2 1.5000 9.3/8 15“ 4 024632
1.17/32 1.5312 9.3/8 16.3/8 5 024634
1.9/16 1.5625 9.5/8 16.5/8 5 024636
1.19/32 1.5938 9.7/8 16.7/8 5 024638
1.5/8 1.6250 10“ 17“ 5 024640
1.21/32 1.6562 10.1/8 17.1/8 5 024642
1.11/16 1.6875 10.1/8 17.1/8 5 024644
1.23/32 1.7188 10.1/8 17.1/8 5 024646
1.3/4 1.7500 10.1/8 17.1/8 5 024648
1.25/32 1.7812 10.1/8 17.1/8 5 024650
1.13/16 1.8125 10.1/8 17.1/8 5 024652
1.27/32 1.8438 10.1/8 17.1/8 5 024654
1.11/16 1.6875 10.1/8 17.1/8 5 024644
1.23/32 1.7188 10.1/8 17.1/8 5 024646
1.3/4 1.7500 10.1/8 17.1/8 5 024648
1.25/32 1.7812 10.1/8 17.1/8 5 024650
1.13/16 1.8125 10.1/8 17.1/8 5 024652
1.27/32 1.8438 10.1/8 17.1/8 5 024654
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 459
Ɣ Fraises pour logement de tête de vis
T400 - 4702
4702
Ŷ
Ɣ
d1
Ø
Inch l2
Inch l1
Inch
d2
Ø
Inch #
Flutes
pilot
Ø
Inch
pilot
Ø
low
pilot
Ø
high EDP #
23/32 1.1/2 5.3/8 1/2 3 1/4 5/16 21/32 6210046
3/4 1.1/2 5.3/8 1/2 3 1/4 5/16 11/16 6210047
25/32 1.1/2 5.3/8 5/8 3 1/4 5/16 23/32 6210048
13/16 1.1/2 5.3/8 5/8 3 1/4 5/16 3/4 6210049
27/32 1.1/2 5.3/8 3/4 3 1/4 5/16 25/32 6210050
7/8 1.1/2 5.3/8 3/4 3 1/4 5/16 13/16 6210051
29/32 1.1/2 6.1/8 3/4 3 1/4 5/16 27/32 6210052
15/16 1.1/2 6.1/8 3/4 3 1/4 5/16 7/8 6210053
31/32 1.3/4 6.3/8 3/4 3 5/16 3/8 29/32 6210054
11.3/4 6.3/8 3/4 3 5/16 3/8 15/16 6210055
1.1/16 1.3/4 6.3/8 3/4 3 5/16 3/8 1 6210056
1.1/8 1.3/4 6.3/8 1“ 3 5/16 3/8 1.1/16 6210057
1.3/16 1.3/4 6.3/8 1“ 3 5/16 3/8 1.1/8 6210058
ƔCounterbore ƔRefrentadores
ƔShort series, interchangeable pilot type
d2
1/4 3/4 3.13/16 15/64 3 3/32 1/8 3/16 6210031
9/32 3/4 3.13/16 17/64 3 3/32 1/8 7/32 6210032
5/16 3/4 3.13/16 19/64 3 3/32 1/8 1/4 6210033
11/32 3/4 3.13/16 5/16 3 3/32 1/8 9/32 6210034
3/8 1.000 4.1/16 5/16 3 5/32 3/16 5/16 6210035
13/32 1.000 4.1/16 3/8 3 5/32 3/16 11/32 6210036
7/16 1.000 4.1/16 3/8 3 5/32 3/16 3/8 6210037
15/32 1.1/4 4.5/16 7/16 3 3/16 3/16 13/32 6210038
1/2 1.1/4 4.5/16 7/16 3 3/16 3/16 7/16 6210039
17/32 1.1/4 4.5/16 1/2 3 3/16 3/16 15/32 6210040
9/16 1.1/4 4.5/16 1/2 3 3/16 3/16 1/2 6210041
19/32 1.1/4 5.1/8 1/2 3 3/16 3/16 17/32 6210042
5/8 1.1/4 5.1/8 1/2 3 3/16 3/16 9/16 6210043
21/32 1.1/4 5.1/8 1/2 3 3/16 3/16 19/32 6210044
11/16 1.1/4 5.1/8 1/2 3 3/16 3/16 5/8 6210045
pØ
1.7/8 1.8750 10.3/8 17.3/8 5 024656
1.29/32 1.9062 10.3/8 17.3/8 5 024658
1.15/16 1.9375 10.3/8 17.3/8 5 024660
1.31/32 1.9688 10.3/8 17.3/8 5 024662
2“ 2.0000 10.3/8 17.3/8 5 024700
2.1/8 2.1250 10.1/4 17.3/8 5 024708
2.1/4 2.2500 10.1/8 17.3/8 5 024716
2.3/8 2.3750 10.1/8 17.3/8 5 024724
2.1/2 2.5000 11.1/4 18.3/4 5 024732
d1Ø
Inch d1decimal
Inch l2
Inch l1
Inch MTS EDP # or
e-Code
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
460
Ɣ Fraises pour logement de tête de vis
4703
ƔCounterbore ƔRefrentadores
ƔShort series, interchangeable pilot type
4702 - 4703
d1
Ø
Inch l2
Inch l1
Inch
d2
Ø
Inch #
Flutes
pilot
Ø
Inch
pilot
Ø
low
pilot
Ø
high
EDP #
or
e-Code
1.3/4 2.1/4 8.1/8 1.1/4 5 7/16 1/2 1.11/16 6210063
1.7/8 2.1/4 8.1/8 1.1/2 5 7/16 1/2 1.13/16 6210064
22.1/2 8.3/8 1.1/2 5 1/2 9/16 1.15/16 6210065
1.1/4 2 6.5/8 1“ 5 3/8 7/16 1.3/16 6210059
1.3/8 2 6.5/8 1“ 5 3/8 7/16 1.5/16 6210060
1.1/2 2 7.7/8 1.1/4 5 3/8 7/16 1.7/16 6210061
1.5/8 2.1/4 8.1/8 1.1/4 5 7/16 1/2 1.9/16 6210062
pØ
Ŷ
Ɣ
d1
Ø
Inch l2
Inch l1
Inch
neck
Ø
Inch
d3
Ø
Inch #
Flutes
pilot
Ø
Inch
pilot
Ø
low MTS
pilot
Ø
high EDP #
1/4 3/4 3.13/16 15/64 2.9/16 3 3/32 1/8 1 3/16 6210066
5/16 3/4 3.13/16 19/64 2.9/16 3 3/32 1/8 1 1/4 6210068
3/8 1.000 4.1/16 11/32 2.9/16 3 5/32 3/16 1 5/16 6210070
7/16 1.000 4.1/16 13/32 2.9/16 3 5/32 3/16 1 3/8 6210072
1/2 1.1/4 4.5/16 29/64 2.9/16 3 3/16 1/4 1 7/16 6210074
9/16 1.1/4 4.5/16 29/64 2.9/16 3 3/16 1/4 1 1/2 6210076
5/8 1.1/4 5.1/8 9/16 3.1/8 3 3/16 1/4 2 9/16 6210078
11/16 1.1/4 5.1/8 5/8 3.1/8 3 3/16 1/4 2 5/8 6210080
3/4 1.1/2 5.3/8 21/32 3.1/8 3 1/4 5/16 2 11/16 6210082
13/16 1.1/2 5.3/8 21/32 3.1/8 3 1/4 5/16 2 3/4 6210084
7/8 1.1/2 5.3/8 21/32 3.1/8 3 1/4 5/16 2 13/16 6210085
15/16 1.1/2 6.1/8 7/8 3.7/8 3 1/4 5/16 2 7/8 6210086
1” 1.3/4 6.3/8 7/8 3.7/8 3 5/16 3/8 3 15/16 6210087
1.1/16 1.3/4 6.3/8 7/8 3.7/8 3 5/16 3/8 3 1 6210088
1.1/8 1.3/4 6.3/8 7/8 3.7/8 3 5/16 3/8 3 1.1/16 6210089
1.3/16 1.3/4 6.3/8 7/8 3.7/8 3 5/16 3/8 3 1.1/8 6210090
1.1/4 2 6.5/8 7/8 3.7/8 5 3/8 7/16 3 1.3/16 6210091
1.5/16 2 6.5/8 7/8 3.7/8 5 3/8 7/16 3 1.1/4 6210092
1.3/8 2 6.5/8 7/8 3.7/8 5 3/8 7/16 3 1.5/16 6210093
1.1/2 2 7.7/8 1.3/16 4.7/8 5 3/8 7/16 4 1.7/16 6210094
1.5/8 2.1/4 8.1/8 1.3/8 4.7/8 5 7/16 1/2 4 1.9/16 6210095
1.3/4 2.1/4 8.1/8 1.3/8 4.7/8 5 7/16 1/2 4 1.11/16 6210096
1.7/8 2.1/4 8.1/8 1.1/2 4.7/8 5 7/16 1/2 4 1.13/16 6210097
2” 2.1/2 8.3/8 1.1/2 4.7/8 5 1/2 9/16 4 1.5/16 6210098
2.1/8 2.1/2 9.7/8 1.3/4 6.1/8 5 1/2 9/16 5 2.1/16 6210099
2.1/4 2.1/2 9.7/8 1.3/4 6.1/8 5 1/2 9/16 5 2.3/16 6210100
2.3/8 2.1/2 9.7/8 1.3/4 6.1/8 5 1/2 9/16 5 2.5/16 6210101
2.1/2 2.1/2 9.7/8 1.3/4 6.1/8 5 1/2 9/16 5 2.7/16 6210102
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 461
4700
4700
Ŷ
Ɣ
d1
Ø
Inch l2
Inch l1
Inch
d2
Ø
Inch l3
Inch
neck
Ø
Inch #
Flutes
pilot
Ø
Inch
pilot
Ø
low
pilot
Ø
high EDP #
ƔLong series
ƔCounterbore Ɣ Fraises pour logement de tête de vis ƔRefrentadores
Ŷ
Ɣ
d1
Ø
Inch l2
Inch l1
Inch
d2
Ø
Inch l3
Inch
neck
Ø
Inch #
Flutes
pilot
Ø
Inch
pilot
Ø
low
pilot
Ø
high EDP #
1/4 1/2 2.3/8 1/4 1.1/8 15/64 4 3/32 1/8 3/16 6210137
9/32 1/2 2.3/8 1/4 1.1/8 0.2560 4 3/32 1/8 7/32 6210138
5/16 1/2 2.3/8 1/4 7/8 17/64 4 3/32 1/8 1/4 6210139
11/32 1/2 2.3/8 1/4 7/8 19/64 4 3/32 1/8 9/32 6210140
3/8 1/2 2.3/8 1/4 7/8 5/16 4 3/32 3/16 5/16 6210141
13/32 1/2 2.13/16 1/4 7/8 5/16 4 1/8 3/16 11/32 6210142
7/16 1/2 2.13/16 1/4 7/8 5/16 4 1/8 3/16 3/8 6210143
15/32 1/2 2.13/16 1/4 7/8 5/16 4 1/8 1/4 13/32 6210144
1/2 1/2 2.13/16 1/4 7/8 3/8 4 1/8 1/4 7/16 6210145
17/32 1/2 2.13/16 1/4 7/8 3/8 4 1/8 1/4 15/32 6210146
9/16 1/2 2.13/16 1/4 7/8 3/8 4 1/8 1/4 1/2 6210147
5/8 1/2 2.13/16 1/4 7/8 1/2 4 1/8 1/4 9/16 6210149
11/16 1/2 2.13/16 1/4 7/8 1/2 4 1/8 1/4 5/8 6210151
3/4 1/2 2.13/16 1/4 7/8 1/2 4 3/16 5/16 11/16 6210153
13/16 1/2 2.13/16 1/4 7/8 1/2 4 3/16 5/16 3/4 6210155
7/8 1/2 2.13/16 1/4 7/8 1/2 4 3/16 5/16 13/16 6210157
15/16 1/2 2.13/16 1/4 7/8 1/2 4 3/16 5/16 7/8 6210159
1“ 1/2 2.13/16 1/4 7/8 1/2 4 3/16 3/8 15/16 6210161
4706 - 4700
Ɣ Aircraft short series
ƔDesigned for pneumatic or
electric drills
Ɣ Interchangeable pilot type
ƔCounterbore Ɣ Fraises pour logement de tête de vis ƔRefrentadores
d2
l3
d2
l3
1/4 3/4 5.3/4 15/64 2.1/4 15/64 3 3/32 1/8 3/16 6210001
5/16 3/4 5.3/4 3/8 2.1/4 19/64 3 3/32 1/8 1/4 6210003
3/8 1.000 5.3/4 3/8 2.1/4 11/32 3 5/32 3/16 5/16 6210005
7/16 1.000 6.1/8 7/16 2.1/4 13/32 3 5/32 3/16 3/8 6210007
1/2 1.1/4 6.3/8 1/2 2.1/2 15/32 3 3/16 1/4 7/16 6210009
9/16 1.1/4 6.1/2 1/2 2.1/2 15/32 3 3/16 1/4 1/2 6210010
5/8 1.1/4 7“ 5/8 1.5/8 9/16 3 3/16 1/4 9/16 6210011
3/4 1.1/2 7.1/4 3/4 2.3/4 11/16 3 1/4 5/16 11/16 6210013
7/8 1.1/2 7.3/4 7/8 3“ 3/4 3 1/4 5/16 13/16 6210015
1“ 1.3/4 9“ 1“ 3“ 7/8 3 5/16 3/8 15/16 6210017
pØ
pØ
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
462
4705
Ŷ
Ɣ
d1
Ø
Inch l2
Inch l1
Inch
d2
Ø
Inch l3
Inch
neck
Ø
Inch #
Flutes
pilot
Ø
Inch
pilot
Ø
low
pilot
Ø
high EDP #
21/32 1.1/4 5.3/8 1/2 3.5/8 9/16 3 3/16 1/4 19/32 6210120
11/16 1.1/4 5.3/8 1/2 3.5/8 5/8 3 3/16 1/4 5/8 6210121
23/32 1.1/4 5.3/8 1/2 3.5/8 5/8 3 3/16 5/16 21/32 6210122
3/4 1.1/4 5.3/8 1/2 3.5/8 11/16 3 3/16 5/16 11/16 6210123
25/32 1.1/4 5.3/8 1/2 3.5/8 11/16 3 3/16 5/16 23/32 6210124
13/16 1.1/4 5.3/8 1/2 3.5/8 3/4 3 3/16 5/16 3/4 6210125
7/8 1.1/4 5.3/8 1/2 3.5/8 3/4 3 3/16 5/16 13/16 6210126
15/16 1.1/4 5.3/8 1/2 3.5/8 3/4 3 3/16 5/16 7/8 6210127
11.1/4 5.3/8 1/2 3.5/8 3/4 3 3/16 3/8 15/16 6210128
1.1/16 1.1/4 5.3/8 1/2 3.5/8 15/16 3 3/16 3/8 1 6210129
1.1/8 1.1/4 5.3/8 1/2 3.5/8 15/16 3 3/16 3/8 1.1/16 6210130
1.3/16 1.1/4 5.3/8 1/2 3.5/8 15/16 3 3/16 3/8 1.1/8 6210131
1.1/4 1.1/4 5.3/8 1/2 3.5/8 1“ 5 3/16 7/16 1.3/16 6210132
1.5/16 1.1/4 5.3/8 1/2 3.5/8 1“ 5 1/4 9/32 1“ 6210133
1.3/8 1.1/4 5.3/8 1/2 3.5/8 1“ 5 1/4 9/32 1“ 6210134
1.7/16 1.1/4 5.3/8 1/2 3.5/8 1.1/8 5 1/4 9/32 1 6210135
1.1/2 1.1/4 5.3/8 1/2 3.5/8 1.1/8 5 1/4 9/32 1 6210136
Ɣ Aircraft long series
ƔInterchangeable pilot type
ƔCounterbore Ɣ Fraises pour logement de tête de vis ƔRefrentadores
d2
l3
1/4 3/4 3.13/16 15/64 3.1/16 15/64 3 3/32 1/8 3/16 6210107
9/32 3/4 3.13/16 17/64 3.1/16 17/64 3 3/32 1/8 7/32 6210108
5/16 3/4 3.13/16 19/64 3.1/16 19/64 3 3/32 1/8 1/4 6210109
11/32 3/4 3.13/16 5/16 3.1/16 5/16 3 3/32 1/8 9/32 6210110
3/8 3/4 3.13/16 5/16 3.1/16 5/16 3 3/32 3/16 5/16 6210111
13/32 3/4 3.13/16 3/8 3.1/16 3/8 3 1/8 3/16 11/32 6210112
7/16 3/4 3.13/16 3/8 3.1/16 3/8 3 1/8 3/16 3/8 6210113
15/32 3/4 3.13/16 7/16 3.1/16 7/16 3 1/8 1/4 13/32 6210114
1/2 3/4 3.13/16 7/16 3.1/16 7/16 3 1/8 1/4 7/16 6210115
17/32 3/4 5.3/8 1/2 4.5/8 1/2 3 1/8 1/4 15/32 6210116
9/16 3/4 5.3/8 1/2 4.5/8 1/2 3 1/8 1/4 1/2 6210117
19/32 3/4 5.3/8 1/2 4.3/16 9/16 3 1/8 1/4 17/32 6210118
5/8 3/4 5.3/8 1/2 4.3/16 9/16 3 1/8 1/4 9/16 6210119
pØ
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 463
ƔDetachable Pilot Ɣ Pilote ƔGuía desmontable para Refrentador
4704
Pilot
Ø
Inch /
d1
Ø
Inch EDP #
3/32 3/32 3210235
40 3/32 3210236
1/8 3/32 3210114
30 3/32 3210238
5/32 3/32 3210115
21 3/32 3210240
20 3/32 3210241
19 3/32 3210242
3/16 3/32 3210116
11 3/32 3210244
10 3/32 3210245
7/32 3/32 3210117
1/4 3/32 3210118
F3/32 3210248
1/8 1/8 3210249
30 1/8 3210250
5/32 1/8 3210251
21 1/8 3210252
20 1/8 3210253
19 1/8 3210254
3/16 1/8 3210255
11 1/8 3210256
10 1/8 3210257
7/32 1/8 3210258
1/4 1/8 3210259
F1/8 3210260
9/32 1/8 3210261
5/16 1/8 3210262
3/8 1/8 3210263
7/16 1/8 3210264
1/2 1/8 3210265
9/16 1/8 3210266
5/8 1/8 3210267
3/16 5/32 3210119
7/32 5/32 3210120
1/4 5/32 3210121
9/32 5/32 3210122
5/16 5/32 3210123
3/8 5/32 3210124
3/16 3/16 3210281
11 3/16 3210282
10 3/16 3210283
7/32 3/16 3210284
1/4 3/16 3210125
F3/16 3210286
9/32 3/16 3210287
5/16 3/16 3210126
11/32 3/16 3210444
Pilot
Ø
Inch /
d1
Ø
Inch EDP #
3/8 3/16 3210127
13/32 3/16 3210445
7/16 3/16 3210128
15/32 3/16 3210446
1/2 3/16 3210129
9/16 3/16 3210130
5/8 3/16 3210131
11/16 3/16 3210294
3/4 3/16 3210295
13/16 3/16 3210296
7/8 3/16 3210297
15/16 3/16 3210298
1“ 3/16 3210299
1/4 1/4 3210300
F1/4 3210301
9/32 1/4 3210302
5/16 1/4 3210132
3/8 1/4 3210133
7/16 1/4 3210134
1/2 1/4 3210135
17/32 1/4 3210447
9/16 1/4 3210136
5/8 1/4 3210137
11/16 1/4 3210138
3/4 1/4 3210139
13/16 1/4 3210140
7/8 1/4 3210141
15/16 1/4 3210313
1“ 1/4 3210314
3/8 5/16 3210142
7/16 5/16 3210143
1/2 5/16 3210144
9/16 5/16 3210145
5/8 5/16 3210146
11/16 5/16 3210147
3/4 5/16 3210148
13/16 5/16 3210149
7/8 5/16 3210150
15/16 5/16 3210151
1“ 5/16 3210152
1.1/16 5/16 3210153
1.1/8 5/16 3210154
7/16 3/8 3210155
1/2 3/8 3210156
9/16 3/8 3210157
5/8 3/8 3210158
11/16 3/8 3210159
3/4 3/8 3210160
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
464
4704 - 4602
Pilot
Ø
Inch /
d1
Ø
Inch EDP #
13/16 3/8 3210161
7/8 3/8 3210162
15/16 3/8 3210163
1“ 3/8 3210164
1.1/16 3/8 3210165
1.1/8 3/8 3210166
1.3/16 3/8 3210167
1.1/4 3/8 3210168
1.5/16 3/8 3210169
1.3/8 3/8 3210170
1.7/16 3/8 3210171
1/2 7/16 3210172
9/16 7/16 3210173
5/8 7/16 3210174
11/16 7/16 3210175
3/4 7/16 3210176
13/16 7/16 3210177
7/8 7/16 3210178
15/16 7/16 3210179
1“ 7/16 3210180
1.1/16 7/16 3210181
1.1/8 7/16 3210182
1.3/16 7/16 3210183
1.1/4 7/16 3210184
1.5/16 7/16 3210185
1.3/8 7/16 3210186
Pilot
Ø
Inch /
d1
Ø
Inch EDP #
9/16 1/2 3210195
5/8 1/2 3210196
11/16 1/2 3210197
3/4 1/2 3210198
13/16 1/2 3210199
7/8 1/2 3210200
15/16 1/2 3210201
1“ 1/2 3210202
1.1/16 1/2 3210203
1.1/8 1/2 3210204
1.3/16 1/2 3210205
1.1/4 1/2 3210206
1.5/16 1/2 3210207
1.3/8 1/2 3210208
1.7/16 1/2 3210209
1.1/2 1/2 3210210
1.9/16 1/2 3210211
1.5/8 1/2 3210212
1.11/16 1/2 3210213
1.3/4 1/2 3210214
1.13/16 1/2 3210215
1.15/16 1/2 3210217
1.7/8 1/2 3210216
2“ 1/2 3210218
Ɣ Fraise à ébavurer et à chanfreiner
4602
Ŷ
Ɣ
d1
Ø
Inch r
angle
d2
Ø
Inch l2
Inch l1
Inch #
Flutes EDP #
1/2 60 1/2 1.5/8 3.7/8 4 4710588
5/8 60 1/2 1.3/4 4“ 4 4710589
3/4 60 1/2 1.7/8 4.1/8 4 4710590
7/8 60 1/2 2“ 4.1/4 4 4710591
d1
Ø
Inch r
angle
d2
Ø
Inch l2
Inch l1
Inch #
Flutes EDP #
5/8 82 1/2 1.3/4 4“ 4 4710594
3/4 82 1/2 1.7/8 4.1/8 4 4710595
7/8 82 1/2 2“ 4.1/4 4 4710596
1“ 82 1/2 2.1/8 4.3/8 4 4710597
Ɣ60° and 82° included angles
Ɣ4-fl ute Countersink Ɣ Avellanadores
1/2 82 1/2 1.5/8 3.7/8 4 4710593
1“ 60 1/2 2.1/8 4.3/8 4 4710592
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 465
Ɣ3-Flute Countersink Ɣ Fraise à ébavurer et à chanfreiner Ɣ Avellanadores
Ŷ
Ɣ
max
d
mm min
dl1
mm
d2
Ø
mm #
Flutes Stock #
EDP #
or
e-Code
6.3 1.6 45 5 3 0108482 G1356.3
8.0 2.0 50 6 3 0108499 G1358.0
10.0 2.5 50 6 3 0144817 G13510.0
12.5 3.2 56 8 3 0108444 G13512.5
max
d
mm min
dl1
mm
d2
Ø
mm #
Flutes Stock #
EDP #
or
e-Code
16.0 4.0 63 10 3 0108451 G13516.0
20.0 5.0 67 10 3 0108468 G13520.0
25.0 6.3 71 10 3 0108475 G13525.0
r
4603 - G135
Ŷ
Ɣ
d1Ø
Inch r
angle d2Ø
mm l1
Inch EDP #
3/8 60 1/4 1.21/32 4710790
1/2 60 1/4 1.27/32 4710791
3/4 60 3/8 2.13/32 4710793
1“ 60 1/2 2.13/16 4710794
1.1/4 60 1/2 3.1/2 4710795
1.1/2 60 1/2 3.7/8 4710796
1/4 82 3/16 1.7/16 4710797
3/8 82 1/4 1.21/32 4710798
1/2 82 1/4 1.27/32 4710799
5/8 82 3/8 2.3/32 4710800
3/4 82 3/8 2.13/32 4710801
1“ 82 1/2 2.13/16 4710802
d1Ø
Inch r
angle d2Ø
mm l1
Inch EDP #
1.1/4 82 1/2 3.1/2 4710803
1.1/2 82 1/2 3.7/8 4710804
1/4 90 3/16 1.7/16 4710805
3/8 90 1/4 1.21/32 4710806
1/2 90 1/4 1.27/32 4710807
5/8 90 3/8 2.3/32 4710808
3/4 90 3/8 2.13/32 4710809
1“ 90 1/2 2.13/16 4710810
1.1/4 90 1/2 3.1/2 4710811
1.1/2 90 1/2 3.7/8 4710812
Ɣ60°, 82° and 90° included angles
ƔSingle fl ute Countersink Ɣ Fraise à ébavurer et à chanfreiner Ɣ Avellanadores
G135
d2
4603
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
466
G136
Ŷ
Ɣ
max
d
mm min
dl1
mm
d2
Ø
mm #
Flutes Stock #
EDP #
or
e-Code
4.3 1.3 40 4 3 0108659 G1364.3
5.0 1.5 40 4 3 0108666 G1365.0
5.3 1.5 40 4 3 0108673 G1365.3
5.8 1.5 45 5 3 0108680 G1365.8
6.0 1.5 45 5 3 0108697 G1366.0
6.3 1.5 45 5 3 0108703 G1366.3
7.0 1.8 50 6 3 0108710 G1367.0
7.3 1.8 50 6 3 0108727 G1367.3
8.0 2.0 50 6 3 0108734 G1368.0
8.3 2.0 50 6 3 0108741 G1368.3
9.4 2.2 50 6 3 0108758 G1369.4
10.0 2.5 50 6 3 0108505 G13610.0
10.4 2.5 50 6 3 0108512 G13610.4
11.5 2.8 56 8 3 0108529 G13611.5
max
d
mm min
dl1
mm
d2
Ø
mm #
Flutes Stock #
EDP #
or
e-Code
12.4 2.8 56 8 3 0108536 G13612.4
13.4 2.9 56 8 3 0108543 G13613.4
15.0 3.2 60 10 3 0108550 G13615.0
16.5 3.2 60 10 3 0108567 G13616.5
19.0 3.5 63 10 3 0108574 G13619.0
20.5 3.5 63 10 3 0108581 G13620.5
23.0 3.8 67 10 3 0108598 G13623.0
25.0 3.8 67 10 3 0108604 G13625.0
26.0 3.8 67 10 3 0108611 G13626.0
28.0 4.0 71 12 3 0108628 G13628.0
30.0 4.2 71 12 3 0108635 G13630.0
31.0 4.2 71 12 0108642 G13631.0
Ŷ
Ɣ
max
d
mm min
dl1
mm MK
(MTS) #
Flutes Stock #
EDP #
or
e-Code
16.0 4.0 90 1 3 0108765 G13716.0
20.0 5.0 106 2 3 0108772 G13720.0
25.0 6.3 112 2 3 0108789 G13725.0
31.5 10.0 118 2 3 0108796 G13731.5
max
d
mm min
dl1
mm MK
(MTS) #
Flutes Stock #
EDP #
or
e-Code
40.0 12.5 150 3 3 0108802 G13740.0
50.0 16.0 160 3 3 0108819 G13750.0
63.0 20.0 190 4 3 0108826 G13763.0
80.0 25.0 200 4 3 0108833 G13780.0
Ɣ3-Flute Countersink Ɣ Fraise à ébavurer et à chanfreiner Ɣ Avellanadores
G136 - G137
G137
Ɣ Fraise à ébavurer et à chanfreiner
Ɣ3-Flute Countersink Ɣ Avellanadores
www.precisiondormer.com
Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION 467
G138 - G154
Ŷ
Ɣ
max
d mm min
dl1
mm MK
(MTS) #
Flutes Stock # EDP # or
e-Code
15.0 3.2 85 1 3 0108840 G13815.0
16.5 3.2 85 1 3 0108857 G13816.5
19.0 3.5 100 2 3 0108864 G13819.0
20.5 3.5 100 2 3 0108871 G13820.5
23.0 3.8 106 2 3 0108888 G13823.0
25.0 3.8 106 2 3 0108895 G13825.0
26.0 3.8 106 2 3 0108901 G13826.0
28.0 4.0 112 2 3 0108918 G13828.0
max
d mm min
dl1
mm MK
(MTS) #
Flutes Stock # EDP # or
e-Code
30.0 4.2 112 2 3 0108925 G13830.0
31.0 4.2 112 2 3 0108932 G13831.0
34.0 4.5 118 2 3 0108949 G13834.0
37.0 4.8 118 2 3 0108956 G13837.0
40.0 10.0 140 3 3 0108963 G13840.0
50.0 14.0 150 3 3 0108970 G13850.0
63.0 16.0 180 4 3 0108987 G13863.0
80.0 22.0 190 4 3 0108994 G13880.0
Ɣ 3-fl ute Countersink Ɣ Fraise à ébavurer et à chanfreiner Ɣ Avellanadores
Ŷ
Ɣ
max
d mm min
dl1
mm d2Ø
mm #
Flutes Stock # EDP # or
e-Code
6.3 1.5 45 5 3 0149348 G1546.3
8.3 2.0 50 6 3 0149355 G1548.3
10.4 2.5 50 6 3 0149362 G15410.4
12.4 2.8 56 8 3 0149379 G15412.4
max
d mm min
dl1
mm d2Ø
mm #
Flutes Stock # EDP # or
e-Code
16.5 3.2 60 10 3 0149386 G15416.5
20.5 3.5 63 10 3 0149393 G15420.5
25.0 3.8 67 10 3 0149409 G15425.0
G138
G154
Ɣ 3-fl ute Countersink Ɣ Fraise à ébavurer et à chanfreiner Ɣ Avellanadores
www.precisiondormer.com Ŷ = EXCELLENT FOR APPLICATION
Ɣ = GOOD FOR APPLICATION
468
Miscellaneous
468
Screw Extractor
1800
Nr. d1
Ø Inch d2
Ø Inch l1
Inch EDP# For Removing Screw
Size
#1 0.054 5/32 2“ 3210001 3/32 to 5/32
#2 0.086 3/16 2.3/8 3210002 5/32 to 7/32
#3 1/8 1/4 2.3/4 3210003 7/32 to 9/32
#4 11/64 5/16 3“ 3210004 9/32 to 3/8
#5 1/4 7/16 3.3/8 3210005 3/8 to 5/8, 1/8, 1/4 pipe
#6 3/8 5/8 3.3/4 3210006 5/8 to 7/8, 3/8 pipe
#7 31/64 3/4 4.1/8 3210007 7/8 to 1.1/8, 1/2 pipe
#8 47/64 1“ 4.3/8 3210008 1.1/8 to 1.3/8, 3/4 pipe
#9 31/32 1.1/4 4.5/8 3210009 1.3/8 and up, 1“ pipe
#10 1.7/32 1.17/32 5“ 3210010 2.1/8 to 2.1/2
#11 1.15/32 1.27/32 5.5/8 3210011 2.1/2 to 3“
#12 1.27/32 2.9/32 6.1/4 3210012 3“ to 3.1/2“
ƔBarreaux rectifi és
ƔCuchillas
Tool Bit Blanks
707 (HSS)
Size OAL 707
EDP# 727
EDP# 757
EDP#
3/16 2.1/2 6310293 6310317 6310305
1/4 2.1/2 6310294 6310318 6310306
5/16 2.1/2 6310295 6310319 6310307
3/8 3“ 6310296 6310320 6310308
7/16 3.1/2 6310297 6310321 6310309
1/2 4“ 6310298 6310322 6310310
5/8 4.1/2 6310299 6310323 6310311
3/4 5“ 6310300 6310324 6310312
1“ 7“ 6310302 6310326 6310314
727 (Cobalt)
757 (Cobalt Vanadium T-15)
Taper
Shank EDP#
1 3210338
2 3210339
3 3210340
4 3210341
5 3210342
K=Ext. K1=Int.
K=Ext.(externe) K1=Int. (Interne)
K=Ext. K1=Int.
K =
Nr. K1 =
Nr. l1
Inch EDP #
21 3-1/2 3210046
31 3-15/16 3210047
41 4-13/16 3210048
32 4-3/8 3210050
42 4-13/16 3210051
43 5-5/16 3210053
K =
Nr. K1 =
Nr. l1
Inch EDP #
53 6-1/16 3210054
54 6-1/2 3210055
65 8-1/2 3210057
Drill Sleeves
411
ƔCône de réduction
ƔConos Morse endurecidos y cementados
430
1900
Nr. Style Qty. Description EDP#
4 oz 1900 24 Drilling & Tapping Fluid, Squirt Bottle 1910501
16 oz 1900 12 Drilling & Tapping Fluid, Squirt Bottle 1910502
1 gal 1900 6 Drilling & Tapping Fluid, Bottle 1910503
5 gal 1900 1 Drilling & Tapping Fluid, Dispenser 1910506
5 gal 1900 1 Drilling & Tapping Fluid, Pail 1910504
55 gal 1900 1 Drilling & Tapping Fluid, Drum 1910505
1 lb 1900 24 Wax Stick 1950501
20 oz 1900 12 Aerosal Can - Foam 1910509
1 gal 1900 6 Light Tapping Fluid, Bottle 1930503
16 oz 1900 12 Light Tapping Fluid, Squirt Bottle 1930502
ƔHuile de coupe
Ɣ Aceite de Corte
Cutting Oil
Drift Keys
Ɣ Extracteur d’outils
Ɣ Expulsores de Brocas
ƔExtracteur De Vis
ƔExtractor Del Tornillo
1815 (Sets)
Style # in
Set Description EDP#
1800 5 Range: #1 - #5 3210013
1816 (Sets)
Style # in
Set Description EDP#
1800 6 Range: #1 - #6 3210014
Ɣ Hardened and ground
www.precisiondormer.com 469
Notes
www.precisiondormer.com
470
Notes
www.precisiondormer.com
Precision Dormer, LLC (“The Company”).
The Company warrants to original equipment manufacturers, distributors and industrial and commercial users of its products that each new
product manufactured by The Company shall be free from material defects and workmanship for one year after delivery by The Company. The
Company’s exclusive obligation under this warranty is limited to furnishing a replacement for, or at its option, repairing or issuing credit for, any
product which is, within one year from the date of delivery by The Company, returned freight prepaid to the plant designated by a representative
of The Company and which upon inspection is determined by The Company to be materially defective in material or workmanship.
Complete information as to operating conditions, machine setup and application of cutting fl uid should accompany any product returned
for inspection. All defective products returned to The Company under this warranty shall be The Company’s property. The provisions of this
warranty shall not apply to any product of The Company which has been subjected to misuse, improper operating conditions, machine setup,
application of cutting fl uid, or which has been repaired or altered without authorization from The Company. THIS WARRANTY IS IN LIEU
OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EXCEPT AS EXPRESSELY SET FORTH HEREIN, THE COMPANY MAKES
NO WARRANTY, EXPRESS OR IMPLIED, AS TO ANY MATTER WHATSOEVER INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The Company’s sole liability on any claim of any kind, whether in contract, tort, or otherwise, for any loss or damage arising out of, connected
with, or resulting from the manufacture, sale, delivery or use of the products sold hereunder shall in no case exceed the amount actually paid to
The Company for the applicable products. IN NO EVENT SHALL THE COMPANY BE LIABLE TO ANY ENTITY OR PERSON FOR ANY
SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES HOWEVER CAUSED, ON ANY THEORY OF LIABILITY, AND
WHETHER OR NOT THE COMPANY HAS BEEN ADVISED OF THE POSSIBLITY OF SUCH DAMAGES.
The Company neither assumes nor authorizes any other person or fi rm to assume for it any other obligation or liability in connection with
its products. The purchaser acknowledges that there are no warranties implied by custom or usage in the trades of the purchaser or The
Company, and that it is customary in the trades of purchaser and The Company that there are to be no warranties, and that any prior dealing
between the purchaser and The Company or its authorized distributor does not imply any warranty from The Company. The limitations set forth
in this section shall apply notwithstanding any failure of essential purpose of any limited remedy.
Product Warranty
471
The Right Tool
Product Offering
Our products are developed in close cooperation
with customers, based on leading-edge expertise
in process technology. Our manufacturing facilities
hold Global Certifications to ensure quality
products from Precision Dormer:
Quality ISO 9001
Environment ISO14001
Health and Safety OHSAS18001
MSDS located on our web site
Technical and Sales Support
Our North American sales force works closely
with you to get you the right tool for your
application at the lowest machining costs.
For technical support,
email us at cs@precisiondormer.com or call us
at 800-877-3745.
Tool Search
Our tool selector and other web based
applications allow both end users and distributors
easy and quick access to find the best product
- for your specific tooling application.
New Products
A steady stream of new product launches will be
introduced including a new tool selector so you
can easily find the right tool at the right time to
help reduce your machining costs.
The Right Time
On-Time Deliveries
Our centrally located Distribution Center in
Hebron, Kentucky ships out orders to SAME DAY
if placed by 4:00 pm CST.
Strong Distribution Channel
Our products are sold through an exclusive
network of regional and local cutting tool
distributors throughout North America. To find a
local distributor, visit www.precisiondormer.com
or call 800-877-3745
Customized Training
We offer you on-site product training to fit the
needs of you or your customers, from new
products and services to basic tool applications.
Workshops will be customized for all levels of
knowledge.
Contact us at cs@precisiondormer.com
Your local Precision Dormer distributor:
USA
301 Industrial Avenue, Crystal Lake, IL 60012
Tel: (800) 877 3745,
Fax: 815 459 2804
M-F 7a.m.-5p.m. CST
Canada
2550 Meadowvale Blvd. Unit 3, Mississauga, ON L5N 8C2
Tel: (888) 336 7637, En Français: (888) 368 8457
Fax: (905) 542 7000
M-F 8a.m.-5p.m. EST
Issue: 01/2010
EDP# LIT7084
