Product Detail Manual

2014-11-11

: Pdf 109095-Attachment 109095-Attachment 004747 Batch12 unilog

Open the PDF directly: View PDF .
Page Count: 24

www.quiktron.com • Call toll free: 800.361.0471

FIBERCOPPERPC/COMPUTER AUDIO/VIDEO RAPIDRUN

Fiber Cables & Hardware

Since 1992, Quiktron has been the premier

manufacturer of high performance ber optic

cables nationwide. Whether you are looking for

standard or custom ber cables, Quiktron can

provide the ideal solution for your requirements

based on your timeframe and within your budget.

Our products range from simple to complex,

standard to custom - all available for quick

delivery and backed by customer support that is

unparalleled in the marketplace.

Whether your application requires simple patch

cables, complex multi-strand pre-terminated trunk

cables or something in between, Quiktron has

the experience, expertise and capabilities to meet

virtually any ber optic cable requirement in a

timeframe that moves at the speed of your business.

In fact, many standard ber cables are available for

same day shipment and most custom ber assemblies

are available to ship in just two business days.

We consistently stretch our limits to ensure that we

are providing you the most personal, knowledgeable

and timely service in nding the right ber cable

for your application. Contact your customer service

representative for more information on Quiktron’s

ber optic cable solutions.

pg. 7

pg. 15

pg. 19

pg. 23

In This Section:

• Custom Fiber ...............................4-6

• Laser-optimized .............................7-8

• Bend Tolerant Cable Assemblies...............9-10

• Multimode ...............................11-14

• Single-mode ..............................15-17

• Mode Conditioning ...........................18

• MTP® ....................................19-20

• Fiber Optic Hardware.......................21-24

www.quiktron.com • Call toll free: 800.361.0471

FIBER CABLE COMPARISON

• Strand counts from 1 to 288

• All cables and connectors are built to Quiktron

and industry standards

• Wide variety of connectors available including ST, SC, LC, FC,

MTRJ, MTP® and more

• Insertion loss and reflectance measurements that meet or

exceed industry standards

• Ultra PC, and Angled PC connector polishing options

• Advanced automated assembly and polishing techniques

• Factory termination results in superior performance compared to

field terminated cables

• 9μm single-mode, 50μm, 10 gigabit laser-optimized or 62.5μm

multimode fiber

• All Corning Gold Series fiber patch cables are included in the

25-year extended warranty offered on complete LANscape®

Solutions installations

• Ships in as little as two business days

• Strand counts from 1 to 288

• Insertion loss and reflectance measurements that meet or

exceed industry standards

• Domestically manufactured using the highest quality components

• All cables and connectors are built to Quiktron

and industry standards

• Wide variety of connectors available including ST, SC, LC, FC,

MTRJ, MTP and more

• Ultra PC, and Angled PC connector polishing options

• Advanced automated assembly and polishing techniques

• Factory termination results in superior performance compared to

field terminated cables

• 9μm single-mode, 50μm, 10 gigabit laser-optimized or 62.5μm

multimode fiber

• Ships in as little as two business days

• All cables and connectors are built to industry standards

• Wide variety of connectors available including ST, SC, LC, FC,

MTRJ, MTP and more

• Insertion loss and reflectance measured on every connector

• We offer Ultra PC, and Angled PC connector polishing options

• Factory termination results in superior performance compared to

field terminated cables

• 9μm single-mode, 50μm, 10 gigabit laser-optimized or 62.5μm

multimode fiber

• Simplex and duplex cable

• Available for same day shipping

Flexible Fiber Choices from Quiktron

Quiktron can produce virtually any type of ber optic patch cable or multi-ber break-out cable quickly and cost effectively.

Standard multimode (50 and 62.5μm), 50μm, 10 gigabit Laser-optimized and Single-mode assemblies are a core part of our business. We also

provide patch cables, attenuators, node/drop service cables, ber optic launch boxes and multi-ber assemblies to ensure that our customers

receive exactly what they need.

Corning Gold Series Fiber Solutions

Q-Series Fiber Solutions

Value Series Fiber Solutions

www.quiktron.com • Call toll free: 800.361.0471

FIBERCOPPERPC/COMPUTER AUDIO/VIDEO RAPIDRUN

CUSTOM FIBER

Quiktron Custom Fiber Solutions

Quiktron is regarded as the leader in providing custom ber

optic solutions. We specialize in providing multi-ber assemblies,

including MTP®, that meet our customers’ specications and

time requirements. These cables save eld termination time

and money, while providing a superior factory termination.

We carefully construct these cables with the installer in mind

to ensure reliability and simplicity for any type of application.

All connector types are available up to 288-count ber cable,

in custom lengths and colors. Identication labels, pulling eyes

and installer-friendly spools make these cables a great option for

both indoor and outdoor applications.

Key Benefits of Quiktron Custom Fiber Solutions

Faster, Easier Installation

• With no fiber preparation, termination kits or specialized

termination training required, Quiktron Custom Fiber Solutions

save installers time and money

• Pulling eyes, identification labels, and spooled solutions

reduce the amount of time required for installation

Improved Performance

• Cables are fully tested and ready for installation

• Factory terminated connectors provide improved end to end

performance

Greater Savings

• Quiktron Custom Fiber Solutions reduce waste caused by improper

field termination

• Reduce the overhead required to outfit field installers with

multiple types of fiber, connectors, and tools

• Reduce the number of hours required for installation

Quick Turn-Around Time

• Custom Pre-terminated Fiber Solutions ship in as little as

two business days

Frequently Requested Custom Fiber Options

• 62.5/125 and 50/125 multimode fiber

• 10 Gigabit laser-optimized 50/125 lultimode liber (LOMMF)

• 9/125 lingle-mode liber

• Mode conditioning patch cables

• Multi-fiber solutions (pre-terms)

• MTP trunk and break-out cables

• Custom solutions for plenum, low-smoke zero halogen,

direct burial, and riser applications

• ST, SC, LC, FC, MTRJ, Escon®, MTP connectors

• Identification labels

• Pulling eyes

• Installer-friendly spools for faster and easier installation

www.quiktron.com • Call toll free: 800.361.0471

CUSTOM FIBER ASSEMBLIES

Quiktron Optical Fiber Cable Solutions

Core Types

• 62.5/125 and 50/125 standard multimode

• 10 gigabit laser-optimized 50/125 multimode

• 9/125 single-mode

• Mode conditioning

Fiber Count and Construction

• 1-288 strands

• Simplex cable

• Duplex zipcord

• Multi-strand breakout cable

• Distribution cable

• Loose tube

• Indoor/outdoor

Jacket Types

• PVC - Also referred to as OFNR; for use in riser applications

• Plenum - Also referred to as z; for use in air spaces

(plenums); when exposed to extreme heat or flames do not emit

toxic chlorine gases; this designation is required by the NEC to be

stamped on all cable jackets that meet this rating

Specialty Fiber Types

Fiber specically designed to be installed outside, either

underground or from pole to pole

Direct burial

• Armored fiber which is designed to be buried; resistant to

environment and rodent penetration

Underground

• Non-armored fiber designed to be installed in a

conduit outside

Fiber With Messenger

• Built in metal cable to attach to buildings/poles for support

Lash-able

• Designed to be attached with metal bands (lashed)

to existing cable

Self Supporting

• Extra rugged to support it’s own weight over a specific span;

does not have a messenger wire attached

Interlocking Armor

• Interlocking armored fiber has a built in armor surrounding

the cable jacket enabling it to be installed without conduit

Additional Multi-Fiber Options

• Installer-friendly spools

• Pulling eyes

• Identification labels

• Low-smoke zero halogen cables

• Availability in riser (OFNR) or plenum (OFNP) rated jackets

• Military specs available

• Pre-terminated cables over 100ft are typically shipped on a

double lipped spool for ease of installation and protection

Simplex Cable

Duplex Zipcord

Distribution Cable

2 Fiber Count

4 Fiber Count

12 Fiber Count

www.quiktron.com • Call toll free: 800.361.0471

FIBERCOPPERPC/COMPUTER AUDIO/VIDEO RAPIDRUN

Creating Your Pre-Terminated Multi-Fiber Assembly Part Number

Creating your custom multi-ber part number is easy. Below is a step by step guide to creating your custom multi-ber assembly

part number. For additional assistance, please contact your Quiktron representative.

1. Select the assembly type from the options in the Assembly Type Chart

2. Note the ber count (2-288)

3. Select your connector types and choose the correct codes from the Connector Types Chart

4. Select your multi-ber cable types and select the correct codes from the Multi-Fiber Cable Types Chart

5. Note the length of your cable in feet (Example: 6 feet would be 006)

6. Select your ber types and choose the correct codes from the Multi-Fiber Types Chart

7. Finally, select any special options and choose the correct code from the Special Options Chart

You can also use our online ber congurator by visiting www.quiktron.com/custom_cables.asp

Pre-Terminated Multi–Fiber Assembly Part #’s

Part number example: 824-M41M-100S =

MTP®/SC trunk on 24 fiber MIC riser cable; 100 feet; Single-mode fiber

* # # - C C T - L L L F (XX)

CUSTOM FIBER ASSEMBLIES

Assembly Type

Fiber Count

Connector Types

Length in Feet

Multi-Fiber Cable Types

Fiber Types

* (Assembly Type)

8 Q-Series

AC All Corning

## (Fiber Count)

2 288

C (Connector Types)

0 Blunt (Flying Lead)

1 ST (Standard 50μm & 62.5)

2 ST (10Gig 50μm & SM)

3 SC (Standard 50μm & 62.5)

4 SC (10Gig 50μm & SM)

5 FDDI Ceramic

6 FC Ceramic

7 SMA 906

8 SC/APC

9 FC/APC

M MTP

MT MTRJ

S Stainless ST

T ST/APC

T (Multi-Fiber Cable Types)

0 Corning Altos/LST (Outdoor Gel)

1 Corning MIC Riser (D-Series 900um Indoor)

(Ribbon For MTP) (Harnesses Bare Ribbon)

1M Corning MIC Riser for MTP

2 Corning MIC Plenum

(D-Series 900μm Indoor) (Ribbon For MTP )

2M Corning MIC Plenum for MTP

3 Corning Fan-Out Riser

(2.9mm Subunits Indoor)

4 Corning Fan-Out Plenum

(2.9mm Subunits Indoor)

5 Corning Freedom

(Riser Indoor/Outdoor-Gel)

6 OCC Riser (D-Series, Indoor/Outdoor)

7 OCC Plenum (D-Series, Indoor/Outdoor)

8 OCC Break-Out Riser (B-Series 2.4mm

Subunits Indoor/Outdoor)

9 OCC Break-Out Plenum (B-Series 2.4mm

Subunits Indoor/Outdoor)

5R Freedom 1

5P Freedom 1 Plenum

6G GX Series OCC

6M OCC D-Series with Messenger

6RM OCC RM Series Round Messenger Cable

8MIL Military Spec

8FX Ultra Fox OCC

SBT Adventum Indoor/Outdoor Riser

F (Fiber Types)

M Multimode 62.5/125

S Single-mode

50 50μm

50L 50μm10Gig

R Ribbon

LLL (Length in Feet)

XX (Special Options)

A Armor

B Berk-Tek

C Color of Fiber Type

L Label One End

E Elite MTP

F# Furcation Size

P Pinned MTRJ/Pinned MTP

IA Interlocking Armor

ID Innerduct

CB Color of Boots

LL Label Both Ends

SK Spider Fan-Out Kit

AM Aerial with Messenger

DS All Dialect Self Supporting Aerial

Customer Specific:

First Two Letters of Customer Name

www.quiktron.com • Call toll free: 800.361.0471

50μm LASER-OPTIMIZED MULTIMODE FIBER

50/125μm Laser-Optimized Multimode Fiber

Optic Patch Cables

Get blazing-fast, 10 gigabit performance with Laser-optimized

50/125 Multimode Fiber Patch Cables from Quiktron.

Laser-optimized Multimode Fiber (LOMMF) Cables provide

backward compatibility with existing 50/125 equipment, while

providing the performance headroom required to support laser

light sources and 10 gigabit applications. Custom lengths and

multi-ber solutions also are available.

Features:

 • Fully compatible with 50/125 multimode fiber applications

• Meets 300m, 10 gigabit serial ethernet distance

performance requirements

• For use with both LED and VCSEL light sources

• Designed for use in 10 gigabit ethernet applications

• Lifetime warranty against defects of materials and workmanship

• 100% optically tested

• Factory terminated for superior performance

• Meets or exceeds industry standards for return loss

and reflectance

• Advanced automated assembly and polishing techniques

• Made in USA (Corning and Q-Series)

Custom Congurations:

• Custom connector polishes available upon request

• 1.6 and 2.0 diameters also available upon request

• Custom color jackets and boots available

• Custom solutions can ship in as little as two business days,

including multi-fiber solutions

• Many configurations and lengths in stock

MTRJ

www.quiktron.com • Call toll free: 800.361.0471

FIBERCOPPERPC/COMPUTER AUDIO/VIDEO RAPIDRUN

50μm LASER-OPTIMIZED MULTIMODE FIBER

50μm Laser-Optimized Connector Specifications

Brand Connector Typical Insertion

Loss

Max. Insertion

Loss

Standard Polish Cable Diameter Housing Ferrule

Corning Gold Series ST 0.20dB 0.50dB PC 2.8 Metal Ceramic

Corning Gold Series SC 0.20dB 0.50dB PC 2.8 Composite Ceramic

Corning Gold Series MTRJ 0.30dB 0.50dB PC 2.8 Composite Composite

Corning Gold Series LC 0.20dB 0.50dB PC 2.8 Composite Ceramic

Q-Series ST 0.25dB 0.50dB PC 2.8 Composite Ceramic

Q-Series SC 0.25dB 0.50dB PC 2.8 Composite Ceramic

Q-Series MTRJ 0.30dB 0.50dB PC 2.8 Composite Composite

Q-Series LC 0.25dB 0.50dB PC 2.8 Composite Ceramic

Value Series MTRJ 0.30dB 0.50dB PC 1.8 Duplex Composite Composite

Value Series LC 0.30dB 0.50dB PC 1.8 Duplex Composite Ceramic

Corning Gold Laser-Optimized MM Fiber Jumpers

ST SC MTRJ LC

ST 832-222-LL 832-242-LLL 833-022-LLL 832-L22-LLL

SC 832-242-LLL 832-442-LLL 833-042-LLL 832-L42-LLL

MTRJ 833-022-LLL 833-042-LLL 833-002-LLL 833-0L2-LLL

LC 832-L22-LLL 832-L42-LLL 833-0L2-LLL 832-LL2-LLL

LLL — Length can be customized to meet your specifications.

When ordering cables please specify length in feet or meters.

Plenum Rated Corning Gold Laser-Optimized

MM Fiber Jumpers

ST SC MTRJ LC

ST 832-224-LLL 832-244-LLL 833-024-LLL 832-L24-LLL

SC 832-244-LLL 832-444-LLL 833-044-LLL 832-L44-LLL

MTRJ 833-024-LLL 833-044-LLL 833-004-LLL 833-0L4-LLL

LC 832-L24-LLL 832-L44-LLL 833-0L4-LLL 832-LL4-LLL

LLL — Length can be customized to meet your specifications.

When ordering cables please specify length in feet or meters.

Plenum Rated Q-Series Laser-Optimized

MM Fiber Jumpers

ST SC MTRJ LC

ST 842-224-LLL 842-244-LLL 843-024-LLL 842-L24-LLL

SC 842-244-LLL 842-444-LL 843-044-LLL 842-L44-LLL

MTRJ 843-024-LLL 843-044-LLL 843-004-LLL 843-0L4-LLL

LC 842-L24-LLL 842-L44-LLL 843-0L4-LLL 842-LL4-LLL

LLL — Length can be customized to meet your specifications.

When ordering cables please specify length in feet or meters.

Value Series 50/125 Laser-Optimized MM Fiber Jumpers

LC-LC LC-SC SC-SC

1m 852-LL2-003 852-L42-003 852-442-003

2m 852-LL2-006 852-L42-006 852-442-006

3m 852-LL2-009 852-L42-009 852-442-009

4m 852-LL2-013 852-L42-013 852-442-013

5m 852-LL2-017 852-L42-017 852-442-017

6m 852-LL2-020 852-L42-020 852-442-020

7m 852-LL2-023 852-L42-023 852-442-023

8m 852-LL2-026 852-L42-026 852-442-026

9m 852-LL2-030 852-L42-030 852-442-030

10m 852-LL2-033 852-L42-033 852-442-033

15m 852-LL2-050 852-L42-050 852-442-050

20m 852-LL2-066 852-L42-066 852-442-066

Q-Series Laser-Optimized MM Fiber Jumpers

ST SC MTRJ LC

ST 842-222-LLL 842-242-LLL 843-022-LLL 842-L22-LLL

SC 842-242-LLL 842-442-LLL 843-042-LLL 842-L42-LLL

MTRJ 843-022-LLL 843-042-LLL 843-002-LLL 843-0L2-LLL

LC 842-L22-LLL 842-L42-LLL 843-0L2-LLL 842-LL2-LLL

LLL — Length can be customized to meet your specifications.

When ordering cables please specify length in feet or meters.

Laser-optimized 50µm Multimode Fiber is a graded-index

product specially designed to reduce the negative effects

of Differential Mode Dispersion (DMD), especially when

using VCSEL lasers that are popular in today’s high speed

Gigabit Ethernet networks. When using a VCSEL laser with

conventional multimode ber, digital pulses can spread out

and cause bit errors during data transmission. This is due to

the inherent nature of the laser and the gradient index ber as

the speed of the transmission slows toward the center of the

core. By optimizing the index prole of the ber core, DMD

effects can be reduced and the effective bandwidth will be

increased to support 1000BASE Ethernet standards.

What is LOMMF?

www.quiktron.com • Call toll free: 800.361.0471

Bend Tolerant Fiber Optic Patch Cables

Quiktron’s Bend Tolerant Fiber Optic Cable Assemblies are

designed to improve the overall performance of ber networks

by reducing attenuation that can commonly cause system

unreliability and downtime induced in local area network (LAN)

datacenter environments and high performance single-mode

systems. This product when subjected to tighter radii bends

results in virtually no signal loss, making it the most reliable

cost-effective ber optic cable connectivity solution. Available

in both multimode and single-mode – see below for details.

The Ultra Bend 300 and Quiktron QuikBend™ 300 product line

provides superior ISO/IEC OM3 50μm multimode laser-optimized

performance allowing 10 gigabit ethernet performance over

300 meters and 1Gb performance over 1km. With a minimum

bend radius of 7.5mm, Quiktron Bend Tolerant assemblies can

withstand many “less-than-ideal” situations in the interconnect

space and allow ber technicians and engineers to work with

greater exibility than ever before in today’s high-density

ber topologies.

All QuikBend assemblies utilize a proprietary manufacturing

process to ensure a high quality connector with exceptional

connector end-face quality, geometry, insertion loss, and back

reection characteristics. Quiktron’s highest quality connectors,

combined with cutting-edge technologies in ber innovation

continue to provide network personnel with the best range of

solutions at the greatest value.

Features:

• 7.5mm and 10mm minimum bend radii cable available

• 50μm multimode 10Gb ISO/IEC OM3 compliance

• Single-mode ITU G.657A and ITU G.657A/B compliance

• Corning Gold jumpers made with 100% Corning components

• Lifetime warranty against defects of materials and workmanship

• 100% optically tested

• Factory terminated for superior performance

• Meets or exceeds industry standards for return loss

and reflectance

• Advanced automated assembly and polishing techniques

• Made in USA

Custom Congurations:

• Custom connector polishes available upon request

• 1.6 and 2.0 diameters also available upon request

• Custom color jackets and boots available

• Custom solutions can ship in as little as two business days,

including multi-fiber solutions

• Many configurations and lengths in stock

BEND TOLERANT CABLE ASSEMBLIES

www.quiktron.com • Call toll free: 800.361.0471

FIBERCOPPERPC/COMPUTER AUDIO/VIDEO RAPIDRUN

BEND TOLERANT CABLE ASSEMBLIES

Bend Tolerant 50μm Laser-Optimized Connector Specifications

Brand Connector Mininum

Bend Radii

Typical

Insertion Loss

Max. Insertion

Loss

Standard

Polish

Cable Diameter Housing Ferrule

Corning Gold Series ST 7.5mm 0.20dB 0.50dB PC 2.8 Composite Ceramic

Corning Gold Series SC 7.5mm 0.20dB 0.50dB PC 2.8 Composite Ceramic

Corning Gold Series LC 7.5mm 0.20dB 0.50dB PC 2.8 Composite Ceramic

Q-Series QuikBend ST 7.5mm 0.25dB 0.50dB PC 2.8 Composite Ceramic

Q-Series QuikBend SC 7.5mm 0.25dB 0.50dB PC 2.8 Composite Ceramic

Q-Series QuikBend LC 7.5mm 0.25dB 0.50dB PC 2.8 Composite Ceramic

Bend Tolerant Single-mode Connector Specifications

Brand Connector Minimum

Bend Radii

Typical

Insertion Loss

Max. Insertion

Loss

Reflectance Standard

Polish

Cable

Diameter

Housing Ferrule

Corning Gold Series FC 7.5 or 10mm 0.20dB 0.50dB -55dB UPC 2.8 Metal Ceramic

Corning Gold Series FC/APC 7.5 or 10mm 0.25dB 0.50dB -65dB APC 2.8 Metal Ceramic

Corning Gold Series LC 7.5 or 10mm 0.20dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Corning Gold Series SC 7.5 or 10mm 0.20dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Corning Gold Series SC/APC 7.5 or 10mm 0.25dB 0.50dB -65dB APC 2.8 Composite Ceramic

Corning Gold Series ST 7.5 or 10mm 0.20dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Corning Gold Series LC/APC 7.5 or 10mm 0.25dB 0.50dB -65dB APC 2.8 Composite Ceramic

Q-Series QuikBend FC 7.5 or 10mm 0.25dB 0.50dB -55dB UPC 2.8 Metal Ceramic

Q-Series QuikBend FC/APC 7.5 or 10mm 0.30dB 0.50dB -65dB APC 2.8 Metal Ceramic

Q-Series QuikBend LC 7.5 or 10mm 0.25dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Q-Series QuikBend SC 7.5 or 10mm 0.25dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Q-Series QuikBend SC/APC 7.5 or 10mm 0.30dB 0.50dB -65dB APC 2.8 Composite Ceramic

Q-Series QuikBend ST 7.5 or 10mm 0.25dB 0.50dB -55dB UPC 2.8 Metal Ceramic

Q-Series QuikBend LC/APC 7.5 or 10mm 0.30dB 0.50dB -65dB APC 2.8 Composite Ceramic

SSS (Series)

CFJ Corning Gold Cable and Connectors

QFJ Q-Series Cable and Connectors

AA (Connector A) followed by

BB (Connector B)

00 No Connector

01 LC

02 SC

03 ST

04 FC

05 Angled LC

06 Angled SC

08 Angled FC

D (Cable Diameter)

2 2mm

3 3mm

F (Fiber Type)

5 7.5mm OM3 Multimode

6 10mm G.657A Single-mode

7 7.5mm G.657.A/B Single-mode

C (Jacket Color)

C Aqua (standard for 50μm MM)

1 Blue (standard for 10mm SM)

9 Yellow (standard 7.5mm G.657.A/B)

T (Cable Construction)

1 Simplex Riser

2 Duplex Riser

S Simplex Plenum

D Duplex Plenum

LLL (Length in Feet)

SSS - AA BB - D F C T - LLL

Series

Connector A

Connector B

Length in Feet

Cable Diameter

Cable Construction

Jacket Color

Fiber Type

Part Number Configuration Options

for Corning Gold and QuikBend Tolerant Cable Assemblies

QuikBend

™

Fiber Optic Cable Solutions

Quiktron’s revolutionary QuikBend™ Fiber Optic Cable Assemblies

change everything. QuikBend performs in even the tightest conditions,

while still maintaining compatibility with existing systems.

This product, when subjected to tighter radii bends, results in

virtually no signal loss, making it the most reliable cost-effective

connectivity solution. QuikBend is available in both multimode

and single-mode bers.

www.quiktron.com • Call toll free: 800.361.0471

62.5/125μm Multimode Fiber Optic Patch Cables

62.5μm ber patch cables by Quiktron are manufactured using

high quality components and materials. Our cables are made

from leading manufacturers of ber cables and connectors and

are visually inspected and optically tested for insertion loss that

meet or exceed industry standards.

Features:

• 100% optically tested with lifetime warranty

• Corning assemblies made with 100% Corning components

• Factory terminated for superior performance

• PC connector polish

• Meets or exceeds industry standards for return loss

and reflectance

• Segmented boot for bend strain relief

• Zipcord jacket with aramid yarn strength members

• Corning and Q-Series made in USA

• Value Series patch cables available for same day shipping

Custom Congurations:

• Custom connector polishes available upon request

• 1.6 and 2.0 diameters also available upon request

• Custom color jackets and boots available

• Custom solutions can ship in as little as two business days

50/125μm Multimode Fiber Optic Patch Cables

Quiktron’s 50μm ber optic patch cables are made using high

quality components and materials. Our 50μm ber cables provide

up to three times the bandwidth of standard 62.5μm cables.

Features:

• 100% optically tested with lifetime warranty

• Factory terminated for superior performance

• Meets or exceeds industry standards for return loss

and reflectance

• Segmented boot for bend strain relief

• Zipcord jacket with aramid yarn strength members

• Jumpers made with 100% Corning components

• PC connector polish

• Corning Gold Series and Q-Series made in USA

• Value Series patch cables available for same day shipping

Custom Congurations:

• Custom connector polishes available upon request

• 1.6 and 2.0 diameters also available upon request

• Custom color jackets and boots available

• Custom solutions can ship in as little as two business days

MULTIMODE FIBER

MTRJ

www.quiktron.com • Call toll free: 800.361.0471

FIBERCOPPERPC/COMPUTER AUDIO/VIDEO RAPIDRUN

MULTIMODE FIBER

50μm Multimode Connector Specifications

Brand Connector Typical Insertion Loss Max. Insertion Loss Standard Polish Cable Diameter Housing Ferrule

Corning Gold Series ST 0.20dB 0.50dB PC 2.8 Composite Ceramic

Corning Gold Series SC 0.20dB 0.50dB PC 2.8 Composite Ceramic

Corning Gold Series MTRJ 0.30dB 0.50dB PC 2.8 Composite Composite

Corning Gold Series LC 0.20dB 0.50dB PC 2.8 Composite Ceramic

Corning Gold Series FC 0.20dB 0.50dB PC 2.8 Metal Ceramic

Corning Gold Series ESCON* 0.50dB 0.50dB PC 2.8 Composite Ceramic

Q-Series ST 0.25dB 0.50dB PC 2.8 Metal Ceramic

Q-Series SC 0.25dB 0.50dB PC 2.8 Composite Ceramic

Q-Series MTRJ 0.30dB 0.50dB PC 2.8 Composite Composite

Q-Series LC 0.25dB 0.50dB PC 2.8 Composite Ceramic

Q-Series FC 0.25dB 0.50dB PC 2.8 Metal Ceramic

Q-Series ESCON 0.50dB 0.50dB PC 2.8 Composite Ceramic

Value Series ST 0.30dB 0.50dB PC 2.8 Metal Ceramic

Value Series LC 0.30dB 0.50dB PC 2.8 Composite Ceramic

Value Series MTRJ 0.30dB 0.50dB PC 1.8 Duplex Composite Composite

Value Series LC 0.30dB 0.50dB PC 1.8 Composite Ceramic

Value Series FC 0.30dB 0.50dB PC 2.8 Metal Ceramic

62.5μm Multimode Connector Specifications

Brand Connector Typical Insertion Loss Max. Insertion Loss Standard Polish Cable Diameter Housing Ferrule

Corning Gold Series ST 0.20dB 0.50dB PC 2.8 Composite Ceramic

Corning Gold Series SC 0.20dB 0.50dB PC 2.8 Composite Ceramic

Corning Gold Series MTRJ 0.30dB 0.50dB PC 2.8 Composite Composite

Corning Gold Series LC 0.20dB 0.50dB PC 2.8 Composite Ceramic

Corning Gold Series FC 0.20dB 0.50dB PC 2.8 Metal Ceramic

Corning Gold Series ESCON* 0.50dB 0.50dB PC 2.8 Composite Ceramic

Q-Series ST 0.25dB 0.50dB PC 2.8 Metal Ceramic

Q-Series SC 0.25dB 0.50dB PC 2.8 Composite Ceramic

Q-Series MTRJ 0.30dB 0.50dB PC 2.8 Composite Composite

Q-Series LC 0.25dB 0.50dB PC 2.8 Composite Ceramic

Q-Series FC 0.25dB 0.50dB PC 2.8 Metal Ceramic

Q-Series ESCON 0.50dB 0.50dB PC 2.8 Composite Ceramic

Value Series ST 0.30dB 0.50dB PC 2.8 Metal Ceramic

Value Series LC 0.30dB 0.50dB PC 2.8 Composite Ceramic

Value Series MTRJ 0.30dB 0.50dB PC 1.8 Duplex Composite Composite

Value Series LC 0.30dB 0.50dB PC 1.8 Composite Ceramic

Value Series FC 0.30dB 0.50dB PC 2.8 Metal Ceramic

*ESCON connectors are domestically manufactured, but are not Corning brand.

*ESCON connectors are domestically manufactured, but are not Corning brand. Fiber specifications list the core and cladding diameters as a ratio. The top example shows the ratio of core to cladding as

62.5/125 microns. Below, the ratio between the fiber core to the fine cladding in single-mode fiber is 9/125 microns.

125

62.5

• For short distance

• Easy to work with

• Used in LANs

• For short distance

• Easy to work with

• Used in LANs

• Provides more bandwidth than 62.5/125 at

850nm wavelengths

• For long distance

• Difficult to work with

• Used by phone companies, CATV companies

Multimode

Single-Mode

Multimode

BUFFER COATING

(diameters vary)

CORE

CLADDING

Multimode vs Single-Mode Total Internal Reflection

www.quiktron.com • Call toll free: 800.361.0471

MULTIMODE FIBER

Corning Gold Series 50μm Multimode Fiber Jumpers

ST SC MTRJ LC ESCON*

ST 830-112-LLL 830-132-LLL 831-012-LLL 830-L12-LLL 830-E12-LLL

SC 830-132-LLL 830-332-LLL 831-032-LLL 830-L32-LLL 830-E32-LLL

MTRJ 831-012-LLL 831-032-LLL 831-002-LLL 831-0L2-LLL 831-0E2-LLL

LC 830-L12-LLL 830-L32-LLL 831-0L2-LLL 830-LL2-LLL 830-EL2-LLL

ESCON* 830-E12-LLL 830-E32-LLL 831-0E2-LLL 830-EL2-LLL 830-EE2-LLL

Plenum Rated

ST 830-114-LLL 830-134-LLL 831-014-LLL 830-L14-LLL 830-E14-LLL

SC 830-134-LLL 830-334-LLL 831-034-LLL 830-L34-LLL 830-E34-LLL

MTRJ 831-014-LLL 831-034-LLL 831-004-LLL 831-0L4-LLL 831-0E4-LLL

LC 830-L14-LLL 830-L34-LLL 831-0L4-LLL 830-LL4-LLL 830-EL4-LLL

ESCON 830-E14-LLL 830-E34-LLL 831-0E4-LLL 830-EL4-LLL 830-EE4-LLL

Q-Series 50μm Multimode Fiber Jumpers

ST SC MTRJ LC ESCON*

ST 822-112-LLL 822-132-LLL 823-012-LLL 822-L12-LLL 822-E12-LLL

SC 822-132-LLL 822-332-LLL 823-032-LLL 822-L32-LLL 822-E32-LLL

MTRJ 823-012-LLL 823-032-LLL 823-002-LLL 823-0L2-LLL 823-0E2-LLL

LC 822-L12-LLL 822-L32-LLL 823-0L2-LLL 822-LL2-LLL 822-EL2-LLL

ESCON* 822-E12-LLL 822-E32-LLL 823-0E2-LLL 822-EL2-LLL 822-EE2-LLL

Plenum Rated

ST 822-114-LLL 822-134-LLL 823-014-LLL 822-L14-LLL 822-E14-LLL

SC 822-134-LLL 822-334-LLL 823-034-LLL 822-L34-LLL 822-E34-LLL

MTRJ 823-014-LLL 823-034-LLL 823-004-LLL 823-0L4-LLL 823-0E4-LLL

LC 822-L14-LLL 822-L34-LLL 823-0L4-LLL 822-LL4-LLL 822-EL4-LLL

ESCON 822-E14-LLL 822-E34-LLL 823-0E4-LLL 822-EL4-LLL 822-EE4-LLL

Value Series 50μm Multimode Fiber Jumpers

ST SC MTRJ LC

ST 850-112-LLL 850-132-LLL 851-012-LLL 850-L12-LLL

SC 850-132-LLL 850-332-LLL 851-032-LLL 850-L32-LLL

MTRJ 851-012-LLL 851-032-LLL 851-002-LLL 851-0L2-LLL

LC 850-L12-LLL 850-L32-LLL 851-0L2-LLL 850-LL2-LLL

*LLL — Length can be customized to meet your specifications. When ordering cables please specify length in feet or meters. *ESCON connectors are domestically manufactured, but are not Corning brand.

The ESCON connector is a trademark of IBM.

* Value Series part numbers are available in stock units in 1, 2, 3, 5, and 10 meter lengths. Additional lengths are available. Please contact your Quiktron representative.

50μm Multimode Fiber Jumpers

www.quiktron.com • Call toll free: 800.361.0471

FIBERCOPPERPC/COMPUTER AUDIO/VIDEO RAPIDRUN

Corning Gold Series 62.5μm Multimode Fiber Jumpers

ST SC MTRJ LC ESCON*

ST 825-112-LLL 825-132-LLL 826-012-LLL 825-L12-LLL 825-E12-LLL

SC 825-132-LLL 825-332-LLL 826-032-LLL 825-L32-LLL 825-E32-LLL

MTRJ 826-012-LLL 826-032-LLL 826-002-LLL 826-0L2-LLL 826-0E2-LLL

LC 825-L12-LLL 825-L32-LLL 826-0L2-LLL 825-LL2-LLL 825-EL2-LLL

ESCON* 825-E12-LLL 825-E32-LLL 826-0E2-LLL 825-EL2-LLL 825-EE2-LLL

Plenum Rated

ST 825-114-LLL 825-134-LLL 826-014-LLL 825-L14-LLL 825-E14-LLL

SC 825-134-LLL 825-334-LLL 826-034-LLL 825-L34-LLL 825-E34-LLL

MTRJ 826-014-LLL 826-034-LLL 826-004-LLL 826-0L4-LLL 826-0E4-LLL

LC 825-L14-LLL 825-L34-LLL 826-0L4-LLL 825-LL4-LLL 825-EL4-LLL

ESCON 825-E14-LLL 825-E34-LLL 826-0E4-LLL 825-EL4-LLL 825-EE4-LLL

Q-Series 62.5μm Multimode Fiber Jumpers

ST SC MTRJ LC ESCON*

ST 820-112-LLL 820-132-LLL 820-012-LLL 820-L12-LLL 820-E12-LLL

SC 820-132-LLL 820-332-LLL 820-032-LLL 820-L32-LLL 820-E32-LLL

MTRJ 821-012-LLL 821-032-LLL 821-002-LLL 821-0L2-LLL 821-0E2-LLL

LC 820-L12-LLL 820-L32-LLL 820-0L2-LLL 820-LL2-LLL 820-EL2-LLL

ESCON* 820-E12-LLL 820-E32-LLL 820-0E2-LLL 820-EL2-LLL 820-EE2-LLL

Plenum Rated

ST 820-114-LLL 820-134-LLL 820-014-LLL 820-L14-LLL 820-E14-LLL

SC 820-134-LLL 820-334-LLL 820-034-LLL 820-L34-LLL 820-E34-LLL

MTRJ 821-014-LLL 821-034-LLL 821-004-LLL 821-0L4-LLL 821-0E4-LLL

LC 820-L14-LLL 820-L34-LLL 820-0L4-LLL 820-LL4-LLL 820-EL4-LLL

ESCON 820-E14-LLL 820-E34-LLL 820-0E4-LLL 820-EL4-LLL 820-EE4-LLL

Value Series 62.5μm Multimode Fiber Jumpers

ST SC MTRJ LC

ST 810-112-LLL 810-132-LLL 811-012-LLL 810-L12-LLL

SC 810-132-LLL 810-332-LLL 811-032-LLL 810-L32-LLL

MTRJ 811-012-LLL 811-032-LLL 811-002-LLL 811-0L2-LLL

LC 810-L12-LLL 810-L32-LLL 811-0L2-LLL 810-LL2-LLL

The ESCON connector is a trademark of IBM.

* Value Series part numbers are available in stock units in 1, 2, 3, 5, and 10 meter lengths. Additional lengths are available. Please contact your Quiktron representative.

62.5μm Multimode Fiber Jumpers

MULTIMODE FIBER

www.quiktron.com • Call toll free: 800.361.0471

9/125μm Single-Mode Fiber Optic Patch Cables

Quiktron’s full line of single-mode jumpers provide high

bandwidth and transmission rates and support longer distances.

Perfect for use with today’s high-speed networks while providing

headroom for tomorrow’s requirements. Our jumpers are made

using leading manufacture components. High quality jumpers

are constructed using a controlled machine polish nish for

low-loss connections. Our assemblies are visually inspected and

optically tested for insertion loss and return loss thresholds that

meet or exceed industry standards. We stock a large inventory

available for same day shipping!

Features:

• Corning assemblies made with 100% Corning components

• CMP-rated plenum jacket for use in air plenums

(plenum rated only)

• 100% optically tested

• Factory terminated for superior performance

• Meets or exceeds industry standards for return loss

and reflectance

• Manufactured using advanced automated assembly and

polishing techniques

• Segmented boot for bend strain relief

• Zipcord jacket with aramid yarn strength members

• Corning and Q-Series made in USA

• Value Series patch cables available for same day shipping

(not available for plenum rated cables)

Custom Congurations:

• Custom connector polishes available upon request

• 1.6 and 2.0 diameters also available upon request

• Custom color jackets and boots available

• Custom solutions can ship in as little as two business days

• Call for additional custom options

SINGLE-MODE FIBER

MTRJ

www.quiktron.com • Call toll free: 800.361.0471

FIBERCOPPERPC/COMPUTER AUDIO/VIDEO RAPIDRUN

SINGLE-MODE FIBER

9μm Single-Mode Connector Specifications

Brand Connector Typical Insertion Loss Max. Insertion Loss Reflectance Standard Polish Cable Diameter Housing Ferrule

Corning Gold Series FC 0.20dB 0.50dB -55dB UPC 2.8 Metal Ceramic

Corning Gold Series FC/APC 0.25dB 0.50dB -65dB APC 2.8 Metal Ceramic

Corning Gold Series LC 0.20dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Corning Gold Series MTRJ 0.30dB 0.50dB -40dB PC 2.8 Composite Ceramic

Corning Gold Series SC 0.20dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Corning Gold Series SC/APC 0.25dB 0.50dB -65dB APC 2.8 Composite Ceramic

Corning Gold Series ST 0.20dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Corning Gold Series LC/APC 0.25dB 0.50dB -65dB APC 2.8 Composite Ceramic

Q-Series FC 0.25dB 0.50dB -55dB UPC 2.8 Metal Ceramic

Q-Series FC/APC 0.30dB 0.50dB -65dB APC 2.8 Metal Ceramic

Q-Series LC 0.25dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Q-Series MTRJ 0.30dB 0.50dB -40dB PC 2.8 Composite Composite

Q-Series SC 0.25dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Q-Series SC/APC 0.30dB 0.50dB -65dB APC 2.8 Composite Ceramic

Q-Series ST 0.25dB 0.50dB -55dB UPC 2.8 Metal Ceramic

Q-Series LC/APC 0.30dB 0.50dB -65dB APC 2.8 Composite Ceramic

Value Series FC 0.30dB 0.50dB -55dB UPC 2.8 Metal Ceramic

Value Series LC 0.30dB 0.50dB -55dB UPC 1.8 Composite Ceramic

Value Series MTRJ 0.30dB 0.50dB -40dB PC 1.8 Duplex Composite Composite

Value Series SC 0.30dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Value Series ST 0.30dB 0.50dB -55dB UPC 2.8 Metal Ceramic

Value Series LC/APC 0.35dB 0.50dB -65dB APC 1.8 Composite Ceramic

Value Series SC/APC 0.35dB 0.50dB -65dB APC 2.8 Composite Ceramic

Value Series FC/APC 0.35dB 0.50dB -65dB APC 2.8 Metal Ceramic

9μm Single-Mode Plenum Rated Connector Specifications

Brand Connector Typical Insertion Loss Max. Insertion Loss Reflectance Standard Polish Cable Diameter Housing Ferrule

Corning Gold Series FC 0.20dB 0.50dB -55dB UPC 2.8 Metal Ceramic

Corning Gold Series FC/APC 0.25dB 0.50dB -65dB APC 2.8 Metal Ceramic

Corning Gold Series LC 0.20dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Corning Gold Series MTRJ 0.30dB 0.50dB -40dB UPC 2.8 Composite Ceramic

Corning Gold Series SC 0.20dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Corning Gold Series SC/APC 0.25dB 0.50dB -65dB APC 2.8 Composite Ceramic

Corning Gold Series ST 0.20dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Corning Gold Series LC/APC 0.25dB 0.50dB -65dB APC 2.8 Composite Ceramic

Q-Series FC 0.25dB 0.50dB -55dB UPC 2.8 Metal Ceramic

Q-Series FC/APC 0.30dB 0.50dB -65dB APC 2.8 Metal Ceramic

Q-Series LC 0.25dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Q-Series MTRJ 0.30dB 0.50dB -40dB UPC 2.8 Composite Composite

Q-Series SC 0.25dB 0.50dB -55dB UPC 2.8 Composite Ceramic

Q-Series SC/APC 0.30dB 0.50dB -65dB APC 2.8 Composite Ceramic

Q-Series ST 0.25dB 0.50dB -55dB UPC 2.8 Metal Ceramic

Q-Series LC/APC 0.30dB 0.50dB -65dB APC 2.8 Composite Ceramic

ULTRA PC

<-55dB

Back Reection

ANGLED PC

<-65dB

Back Reection

Polish Types/Typical Back Reflection

www.quiktron.com • Call toll free: 800.361.0471

SINGLE-MODE FIBER

Corning Gold Series 9μm Single-Mode Fiber Jumpers*

FC FC/APC LC MTRJ SC SC/APC ST

FC Simplex 825-665-LLL 825-695-LLL 825-L65-LLL -825-465-LLL 825-685-LLL 825-265-LLL

FC Duplex 825-667-LLL 825-697-LLL 825-L67-LLL 826-067LLL 825-467-LLL 825-687-LLL 825-267-LLL

FC/APC Simplex 825-695-LLL 825-995-LLL 825-L95-LLL -825-495-LLL 825-895-LLL 825-295-LLL

FC/APC Duplex 825-697-LLL 825-997-LLL 825-L97-LLL 826-097-LLL 825-497-LLL 825-897-LLL 825-297-LLL

LC Simplex 825-L65-LLL 825-L95-LLL 825-LL5-LLL -825-L45-LLL 825-L85-LLL 825-L25-LLL

LC Duplex 825-L67-LLL 825-L97-LLL 825-LL7-LLL 826-0L7-LLL 825-L47-LLL 825-L87-LLL 825-L27-LLL

MTRJ Duplex 826-067-LLL 826-097-LLL 826-0L7-LLL 826-007-LLL 826-047-LLL 826-087-LLL 826-027-LLL

SC Simplex 825-465-LLL 825-495-LLL 825-L45-LLL -825-445-LLL 825-485-LLL 825-245-LLL

SC Duplex 825-467-LLL 825-497-LLL 825-L47-LLL 826-047-LLL 825-447-LLL 825-487-LLL 825-247-LLL

SC/APC Simplex 825-685-LLL 825-895-LLL 825-L85-LLL -825-485-LLL 825-885-LLL 825-285-LLL

SC/APC Duplex 825-687-LLL 825-897-LLL 825-L87-LLL 826-087-LLL 825-487-LLL 825-887-LLL 825-287-LLL

ST Simplex 825-265-LLL 825-295-LLL 825-L25-LLL -825-245-LLL 825-285-LLL 825-225-LLL

ST Duplex 825-267-LLL 825-297-LLL 825-L27-LLL 826-027-LLL 825-247-LLL 825-287-LLL 825-227-LLL

Plenum Rated

FC Simplex 825-666-LLL 825-696-LLL 825-L66-LLL -825-466-LLL 825-686-LLL 825-266-LLL

FC Duplex 825-668-LLL 825-698-LLL 825-L68-LLL 826-068-LLL 825-468-LLL 825-688-LLL 825-268-LLL

FC/APC Simplex 825-696-LLL 825-996-LLL 825-L96-LLL -825-496-LLL 825-896-LLL 825-296-LLL

FC/APC Duplex 825-698-LLL 825-998-LLL 825-L98-LLL 826-098-LLL 825-498-LLL 825-898-LLL 825-298-LLL

LC Simplex 825-L66-LLL 825-L96-LLL 825-LL6-LLL -825-L46-LLL 825-L86-LLL 825-L26-LLL

LC Duplex 825-L68-LLL 825-L98-LLL 825-LL8-LLL 826-0L8-LLL 825-L48-LLL 825-L88-LLL 825-L28-LLL

MTRJ Duplex 826-068-LLL 826-098-LLL 826-0L8-LLL 826-008-LLL 826-048-LLL 826-088-LLL 826-028-LLL

SC Simplex 825-466-LLL 825-496-LLL 825-L46-LLL -825-446-LLL 825-486-LLL 825-246-LLL

SC Duplex 825-468-LLL 825-498-LLL 825-L48-LLL 826-048-LLL 825-448-LLL 825-488-LLL 825-248-LLL

SC/APC Simplex 825-686-LLL 825-896-LLL 825-L86-LLL -825-486-LLL 825-886-LLL 825-286-LLL

SC/APC Duplex 825-688-LLL 825-898-LLL 825-L88-LLL 826-088-LLL 825-488-LLL 825-888-LLL 825-288-LLL

ST Simplex 825-266-LLL 825-296-LLL 825-L26-LLL -825-246-LLL 825-286-LLL 825-226-LLL

ST Duplex 825-268-LLL 825-298-LLL 825-L28-LLL 826-028-LLL 825-248-LLL 825-288-LLL 825-228-LLL

Q-Series 9μm Single-Mode Fiber Jumpers*

FC FC/APC LC MTRJ SC SC/APC ST

FC Simplex 820-665-LLL 820-695-LLL 820-L65-LLL —820-465-LLL 820-685-LLL 820-265-LLL

FC Duplex 820-667-LLL 820-697-LLL 820-L67-LLL 821-067-LLL 820-467-LLL 820-687-LLL 820-267-LLL

FC/APC Simplex 820-695-LLL 820-995-LLL 820-L95-LLL —820-495-LLL 820-895-LLL 820-295-LLL

FC/APC Duplex 820-697-LLL 820-997-LLL 820-L97-LLL 821-097-LLL 820-497-LLL 820-897-LLL 820-297-LLL

LC Simplex 820-L65-LLL 820-L95-LLL 820-LL5-LLL —820-L45-LLL 820-L85-LLL 820-L25-LLL

LC Duplex 820-L67-LLL 820-L97-LLL 820-LL7-LLL 821-0L7-LLL 820-L47-LLL 820-L87-LLL 820-L27-LLL

MTRJ Duplex 821-067-LLL 821-097-LLL 821-0L7-LLL 821-007-LLL 821-047-LLL 821-087-LLL 821-027-LLL

SC Simplex 820-465-LLL 820-495-LLL 820-L45-LLL —820-445-LLL 820-485-LLL 820-245-LLL

SC Duplex 820-467-LLL 820-497-LLL 820-L47-LLL 821-047-LLL 820-447-LLL 820-487-LLL 820-247-LLL

SC/APC Simplex 820-685-LLL 820-895-LLL 820-L85-LLL —820-485-LLL 820-885-LLL 820-285-LLL

SC/APC Duplex 820-687-LLL 820-897-LLL 820-L87-LLL 821-087-LLL 820-487-LLL 820-887-LLL 820-287-LLL

ST Simplex 820-265-LLL 820-295-LLL 820-L25-LLL —820-245-LLL 820-285-LLL 820-225-LLL

ST Duplex 820-267-LLL 820-297-LLL 820-L27-LLL 821-027-LLL 820-247-LLL 820-287-LLL 820-227-LLL

Plenum Rated

FC Simplex 820-666-LLL 820-696-LLL 820-L66-LLL —820-466-LLL 820-686-LLL 820-266-LLL

FC Duplex 820-668-LLL 820-698-LLL 820-L68-LLL 821-068-LLL 820-468-LLL 820-688-LLL 820-268-LLL

FC/APC Simplex 820-696-LLL 820-996-LLL 820-L96-LLL —820-496-LLL 820-896-LLL 820-296-LLL

FC/APC Duplex 820-698-LLL 820-998-LLL 820-L98-LLL 821-098-LLL 820-498-LLL 820-898-LLL 820-298-LLL

LC Simplex 820-L66-LLL 820-L96-LLL 820-LL6-LLL —820-L46-LLL 820-L86-LLL 820-L26-LLL

LC Duplex 820-L68-LLL 820-L98-LLL 820-LL8-LLL 821-0L8-LLL 820-L48-LLL 820-L88-LLL 820-L28-LLL

MTRJ Duplex 821-068-LLL 821-098-LLL 821-0L8-LLL 821-008-LLL 821-048-LLL 821-088-LLL 821-028-LLL

SC Simplex 820-466-LLL 820-496-LLL 820-L46-LLL —820-446-LLL 820-486-LLL 820-246-LLL

SC Duplex 820-468-LLL 820-498-LLL 820-L48-LLL 821-048-LLL 820-448-LLL 820-488-LLL 820-248-LLL

SC/APC Simplex 820-686-LLL 820-896-LLL 820-L86-LLL —820-486-LLL 820-886-LLL 820-286-LLL

SC/APC Duplex 820-688-LLL 820-898-LLL 820-L88-LLL 821-088-LLL 820-488-LLL 820-888-LLL 820-288-LLL

ST Simplex 820-266-LLL 820-296-LLL 820-L26-LLL —820-246-LLL 820-286-LLL 820-226-LLL

ST Duplex 825-268-LLL 825-298-LLL 825-L28-LLL 826-028-LLL 825-248-LLL 825-288-LLL 825-228-LLL

* LLL — Length can be customized to meet your specifications. When ordering cables please specify length in feet or meters.

** Value Series part numbers are available in stock units of 1, 2, 3, 5, and 10 meter lengths. Additional lengths are available. Please contact your Quiktron representative.

Value Series 9μm Single-Mode Fiber Jumpers**

FC LC MTRJ SC ST

FC Simplex 810-665-LLL ————

FC Duplex 810-667-LLL —811-067-LLL 810-467-LLL 810-267-LLL

LC Duplex —810-LL7-LLL 811-0L7-LLL 810-L47-LLL 810-L27-LLL

MTRJ Duplex 811-067-LLL 811-0L7-LLL 811-007-LLL 811-047-LLL 811-027-LLL

www.quiktron.com • Call toll free: 800.361.0471

FIBERCOPPERPC/COMPUTER AUDIO/VIDEO RAPIDRUN

MODE CONDITIONING

Mode Conditioning Patch Cables

Mode Conditioning Cables from Quiktron are designed for use

in Gigabit Ethernet 10000BASE-LX applications. These cables

are fully compliant with IEEE 802.3z® application standards.

Mode Conditioning Cables are needed in applications where

new high-speed gigabit 1000BASE-LX routers and switches are

being deployed into existing multimode plants.

Features:

• IEEE 802.3z compliant

• Masks Differential Mode Delay (DMD) effects

• Use in place of standard equipment to cable plant patch cable

• Lifetime warranty

Custom Congurations:

• Custom connector polishes available upon request

• 1.6 and 2.0 diameters also available upon request

• Custom color jackets and boots available

• Custom solutions can ship in as little as two business days

• Call for additional custom options

Mode Conditioning Patch Cables

Part # Description

810-24M2-003 1M ST-SC Mode Conditioning Fiber Patch Cable PVC

810-24M2-006 2M ST-SC Mode Conditioning Fiber Patch Cable PVC

810-24M2-009 3M ST-SC Mode Conditioning Fiber Patch Cable PVC

810-24M2-017 5M ST-SC Mode Conditioning Fiber Patch Cable PVC

810-24M2-033 10M ST-SC Mode Conditioning Fiber Patch Cable PVC

810-4M42-003 1M SC-SC Mode Conditioning Fiber Patch Cable PVC

810-4M42-006 2M SC-SC Mode Conditioning Fiber Patch Cable PVC

810-4M42-009 3M SC-SC Mode Conditioning Fiber Patch Cable PVC

810-4M42-017 5M SC-SC Mode Conditioning Fiber Patch Cable PVC

810-4M42-033 10M SC-SC Mode Conditioning Fiber Patch Cable PVC

810-4M42-003 1M SC-SC Mode Conditioning Fiber Patch Cable PVC

810-4M42-006 2M SC-SC Mode Conditioning Fiber Patch Cable PVC

810-4M42-009 3M SC-SC Mode Conditioning Fiber Patch Cable PVC

810-4M42-017 5M SC-SC Mode Conditioning Fiber Patch Cable PVC

810-4M42-033 10M SC-SC Mode Conditioning Fiber Patch Cable PVC

Custom lengths and configurations available. Log onto our website www.quiktron.com and go

to our Custom Fiber Center.

Optical Mode Conditioners provide a convenient and reliable

method of connecting multimode ber plants with 1000Base-

LX based transmission equipment compliant with IEEE 802.3

standards. Mode conditioners provide a method of offsetting a

single-mode ber core with a corresponding multimode ber.

This calibrated offset reduces a phenomena called differential

mode dispersion, or DMD, which can cause the transmitting

laser pulse to spread out and merge into neighboring pulses

creating bit errors in the transmission signal. Mode conditioners

are built in the form of a simple duplex patch cable, so they can

easily be installed in a system without the need for additional

components or hardware. Their length can range from one

meter and up to support virtually any network topography.

The need for this patch cord is due to the single-mode launch

nature of the -LX (1300nm) transceiver modules used for

Gigabit Ethernet. These modules have to operate for both

single-mode and multimode bers. Launching a single-mode

laser into the center of a multimode ber can cause multiple

signals to be generated that confuse the receiver at the other

end of the ber. These multiple signals, caused by Differential

Mode Delay (DMD) effects, severely limit the cable distance

lengths for operating Gigabit Ethernet. A mode conditioning

patch cord eliminates these multiple signals by allowing the

single-mode launch to be offset away from the center of

a multimode ber. This offset point creates a launch that

is similar to typical multimode LED launches.

Things to know when using mode conditioning cables to patch an

existing multimode cable plant to your Gigabit LX equipment.

• Usually used in pairs, mode conditioning cables usually require

a MC cable at each end to connect the equipment to the cable

plant. The only reason to order an odd number of mode

conditioning cables is to have a spare on hand.

• If your Gigabit LX switch is equipped with SC or LC connectors,

please be sure to connect the yellow leg (single-mode) of the

cable to the transmit side, and the orange leg (multimode)

to the receive side of the equipment. It is imperative that

this configuration be maintained on both ends. The swap of

transmit and receive can only be done at the cable plant side.

(see diagram below)

What is a Mode Conditioning Patch Cable?

Multimode Single-mode

Centerlines Offset

www.quiktron.com • Call toll free: 800.361.0471

MTP FIBER

MTP® Fiber Cable Solutions

High performance, high density MTP ber cable solutions from

Quiktron replace up to 12 traditional ber connectors with one

single small form factor connector reducing installation time

and labor costs. They are suitable for a variety of applications:

data centers, telecommunications, broadcast communication,

and industrial control applications. These multi-ber solutions

provide advantages in size, offering 12 times the density when

compared to a similarily sized SC connector. Factory terminated

and tested, MTP solutions provide signicant installation time

savings during installation or reconguration. A push-pull design

is utilized for easy mating and removal. Break-out solutions

are ideal for making connections within rack mounted or wall

mounted ber enclosures that utilize single ber connectors.

MTP® Fiber Cable Styles

MTP Patch Cable

• 12 fiber strands with MTP connector on each end

• Used for point to point application or for connections to standard

fiber patch panels

• Available in both single-mode and multimode fiber

• Available in both PVC (OFNR) and plenum (OFNP) jackets

MTP Harness Cable

• Cable has a single MTP connector on one end that breaks out into

6 or 12 connectors (LC, SC, ST, etc.)

•Typically 12 strands

• Designed to save front panel space and streamline

fiber management

• Available in both single-mode and multimode fiber

• Available in both PVC (OFNR) and plenum (OFNP) jackets

MTP Trunk Cable

• Wide variety of strand counts and configurations - most common

is the 12-strand plenum ribbon

• Available in both single-mode and multimode fiber

• Available in both PVC (OFNR) and plenum (OFNP) jackets

• Manufactured with a pulling eye, enables cable to go around

bends without getting tangled and protects the connector

during installation

Features:

• Made in the USA

• Available in fiber counts from 12–144

• Factory tested for insertion loss

• Compact push-pull locking mechanism

• Reduces installation time and costs

• PC polish for multimode fiber; APC polish for single-mode fiber

• Ribbon cables are 1/3 the size of tight buffered fiber optic cables,

which enables them to fit into tight spaces and have a smaller

minimum bend radius

• Meets TIA/EIA 604-5 (FOCIS-5) standard for MPO/MTP connectors

• Designed and tested to Telcordia-GR-1435

• Lifetime warranty

Custom configurations and test results available by request. Contact your sales representative

for details.

MTP Patch Cables

MTP Trunk Cables

MTP Harness Cables

www.quiktron.com • Call toll free: 800.361.0471

FIBERCOPPERPC/COMPUTER AUDIO/VIDEO RAPIDRUN

• Data Centers

• Fiber Channel Storage

• Parallel Processing Applications

• Telecommunications

• Optical Backplanes

• Industrial Control Applications

• Backbone Installations

• Disaster Recovery

Fiber Cable

• 9/125 Single-Mode

• 50/125 Multimode

• 50/125 Laser-Optimized MM

• 62.5/125 Multimode

Jacket Type

• PVC - OFNR rated

• Plenum - OFNP rated

Cable Style

• Ribbon

• MIC Cable

• Indoor/Outdoor

Options

• Pulling Eyes

• Installer Friendly Spools

• Identification Labels

MTP

Cable Key Applications MTP

Key Configurations

MTP Ribbon Trunk Cables

Strand Count* Cable Type MTP-ST MTP-SC MTP-MTP MTP-LC

12 62.5/125 MTP Ribbon-Plenum 812-M12-LLL 812-M32-LLL 812-MM2-LLL 812-ML2-LLL

12 50/125 MTP Ribbon-Plenum 812-M12-LLL50 812-M32-LLL50 812-MM2-LLL50 812-ML2-LLL50

12 50/125 LOMM MTP Ribbon-Plenum 812-M22-LLL50L 812-M42-LLL50L 812-MM2-LLL50L 812-ML2-LLL50L

12 9/125 LOMM MTP Ribbon-Plenum 812-M22-LLLS 812-M42-LLLS 812-MM2-LLLS 812-ML2-LLLS

MTP Reduced Diameter Cables

Strand Count** Cable Type MTP-ST MTP-SC MTP-MTP MTP-LC

12 62.5/125 MTP Reduced Diameter Cable 812-M1MP-LLL 812-M3MP-LLL 812-MMMP-LLL 812-MLMP-LLL

12 50/125 MTP Reduced Diameter Cable 812-M1MP-LLL-50 812-M3MP-LLL-50 812-MMMP-LLL-50 812-MLMP-LLL-50

12 50/125 LOMM MTP Reduced Diameter Cable 812-M2MP-LLL-50L 812-M4MP-LLL-50L 812-MMMP-LLL-50L 812-MLMP-LLL-50L

12 9/125 SM MTP Reduced Diameter Cable 812-M2MP-LLLS 812-M4MP-LLLS 812-MMMP-LLLS 812-MLMP-LLLS

* Also available in 24, 48, and 72 strand, change the first three numbers accordingly; 824, 848, 872

** Riser cable available upon request

MTP FIBER

## (Fiber Count)

• 12

• 24

• 48

• 72

CC (Connector Type)

M MTP

02 ST

04 SC

06 FC

L LC

T (Cable Type)

1 Ribbon Riser

2 Ribbon Plenum

M 250

m Reduced Diameter Riser

MP 250

m Reduced Diameter Plenum

F (Fiber Type)

S Single-mode

M 62.5

m Multimode

50 50

m Multimode

50L Laser-optimized 50

m Multimode

H (Harness)

Use if assembly is for a module or cassette

P (Guide Pins)

LLL (Length in Feet)

8 # # - C C T - L L L F (H) (P)

Fiber Count

Connector Type

Cable Type

Guide Pins

Length in Feet

Harness

Fiber Type

Configuration Options

MTP® Product Types

MTP to MTP Trunks MTP connectors on both ends

MTP to SC/ST/FC/LC Trunks MTP connectors on one end; SC/ST/FC/LC connectors on opposite end

Part number example: 824-M41M-100S =

MTP/SC trunk on 24 fiber MIC riser cable; 100 feet; single-mode fiber

www.quiktron.com • Call toll free: 800.361.0471

FIBER OPTIC HARDWARE

The Q-Series Competitive Advantages

The Most Installer-Friendly Deployment

• Pre-terminated trunk cables eliminate costly and labor-intensive

field termination and make installation truly effortless. Just

specify your cable requirements and break-out connection - then

pull, plug and play.

• Our system is based on the high-density MTP® fiber optic

connector, which can replace up to 12 field-terminated

connectors with a single connection.

• Legacy trunk/ backbone connections are also supported with our

adapter panels.

The Quickest Turn-Around Time

• We ship directly from stock and offer the lowest lead times in the

industry, with nearly off-the-shelf delivery.

• Our connectivity experts are always available to help you design

the right solution for your needs, saving you time in the

ordering process.

Long-Term Durability and a Lifetime Guarantee

• Our factory terminations ensure the highest quality and

optimum performance.

• All of our cabling and hardware components are 100% tested,

shipped with a qualification report, and guaranteed for life.

• You benefit from a scalable, future-proof investment - with a

modular design that can grow right along with your network.

• All enclosures, adapter panels, and fiber distribution modules are

constructed of steel and aluminum, and are guaranteed for life.

• Data Centers

• Broadcast Communications

• Fiber Channel Storage

• Telecommunications

• Industrial Control Applications

Wide Variety of Applications

Step 1: Choose Your Enclosure

Step 2: Choose Your Module or Adapter Panel

Step 3: Choose Your Cable

www.quiktron.com • Call toll free: 800.361.0471

FIBERCOPPERPC/COMPUTER AUDIO/VIDEO RAPIDRUN

FIBER OPTIC HARDWARE

In this example, a 19” rack mounted enclosure is installed in

a network cabinet in the datacenter. Enclosed are the MTP®

ber distribution break-out modules equipped with 24-LC

10GBE (Aqua) terminations. Out in the zone, also commonly

referred to as a communication closet, a wall mount enclosure

with the same ber distribution break-out module is installed.

Connections between the zone and the datacenter are simply

12-Strand MTP-MTP plenum ribbon cables. Once the connections

have been made between the zone and the datacenter, it is just

a matter of using standard 10GBE ber optic patch cables to

connect the network hardware such as switches or routers, to

the ber optic backbone. It cannot get any easier. Key benets

for the end-user include:

• Installation time is minimal as compared to field terminations

providing significant cost savings.

• Pre-terminated solution insures highest optical performance

consistently.

• Scalable, high quality solution that can adapt and change as the

network changes.

• Optical cable is secure, which keeps your data safeguarded.

• Optical cable allows your local network reach to expand beyond

the limitations of copper solutions.

Use the Q-Series Fiber Distribution system as the transport medium between the datacenter and the end-user.

www.quiktron.com • Call toll free: 800.361.0471

Rack Mount Fiber Optic Enclosures & Panels

Our rugged rack mount enclosures can securely house 3, 6 or

12 pre-terminated modules or adapter panels. They’re available

in 1, 2 and 4U congurations, and feature front and rear doors

for convenient access. The top panels can also be removed for

additional access, and are equipped with rear knockouts for

horizontal cabling entrances. Guaranteed for life, each enclosure

is designed to be installed in racks or cabinets supporting

19” or 23” rails. The rack mount ears can also be adjusted to

three different depths from front to rear, providing even more

exibility. Plus, for additional savings, 1 and 2U rack mount

panels are available. Like the enclosures, they can accept 3 or 6

pre-terminated modules or adapter panels.

Features:

• Both doors on the 1U enclosures are constructed of steel and

feature a locking sliding inner tray for even more flexible access

• The 2U and 4U enclosures are equipped with a smoked plastic

front door and a steel rear door - plus provide spool rings for

securing and storing excess cable lengths with a safe bend radius

• A single 4U enclosure can support up to 288 strands, offering the

highest density solution

• All units ship with an accessory pack that includes mounting

screws, a cable ID label for marking terminations, and cable ties

and rectangular cable holders for managing cable terminations

Wall Mount Fiber Optic Enclosures & Panels

Featuring a guaranteed-for-life 100% steel construction, Quiktron

wall mount enclosures are designed to secure break-out modules

in the horizontal or zone distribution areas. With your choice

of sizes including 1, 2, 4 and 12 break-out modules or adapter

panels, these heavy-duty enclosures feature a low prole that

requires little wall space, as well as a large routing space for

accessible patch cabling entrance.

Features:

• Offers the option of a 1, 2, 4, and 12 module or

panel configuration

• Large top and bottom grommeted holes provide easy entrance

for the horizontal trunk cables

• A latching front door, stamped with knockouts for optional locks,

provides convenient access to the enclosed modules

• Spool rings for securing and storing excess cable lengths have

been incorporated, facilitating a safe bend radius

Rack Mount Fiber Optic Enclosures

Part # Description

RS1-QTR* 3 Panel - 1U Rack Mount Enclosure

RS2-QTR 6 Panel - 2U Rack Mount Enclosure

RS4-QTR 12 Panel - 4U Rack Mount Enclosure

Rack Mount Fiber Optic Panels

Part # Description

PS1-QTR 3 Panel - 1U Rack Mount Panel

PS2-QTR 6 Panel - 2U Rack Mount Panel

Wall Mount Fiber Optic Enclosures

Part # Description

WS0-QTR 1 Panel Wall Mount

WS1-QTR* 2 Panel Wall Mount

WS2-QTR 4 Panel Wall Mount

WS3-QTR 12 Panel Wall Mount

*RS1-QTR *WS1-QTR

FIBER OPTIC HARDWARE

www.quiktron.com • Call toll free: 800.361.0471

FIBERCOPPERPC/COMPUTER AUDIO/VIDEO RAPIDRUN

Fiber Distribution Break-Out Modules

Our break-out modules provide the mechanical distribution

of the 12-strand MTP® connector. Housed in a rugged steel

enclosure that’s guaranteed for life, these durable modules arrive

fully loaded with the pre-terminated and tested MTP break-

out harness. This not only reduces installation time but also

ensures the most robust factory-quality performance and

consistency. For additional convenience, our modules snap in

either rack or wall mount enclosures, featuring scalable designs

that can grow with your network system.

Features:

• Available in 16 off-the-shelf configurations supporting

conventional terminations such as LC, SC and ST and allowing

standard patch cables to easily attach the network hardware

to the fiber optic infrastructure

• Custom modules supporting other fiber types can also be turned

around quickly

Fiber Optic Adapter Panels

The Q-Series Fiber Optic Distribution System was also designed

with the older legacy infrastructure in mind. We offer a complete

array of ber optic adapter panels that are pre-loaded with mating

sleeves. Simply choose the connector type that meets your needs

and connect it to your backbone or trunk cable. We also can

provide custom congurations.

Features:

• Offers a small footprint: 1.125” H x 5.125” W x 4.5” D

• Adapter panels available with a wide variety of configurations

Fiber Distribution Breakout Modules

Description 62.5/125u 50/125u 50/125

LOMM

Single-Mode

12-strand MTP-ST MM3-QTR-D1 MM3-QTR-D150 MM3-QTR-D150L MM3-QTR-D1S

12-strand MTP-SC MM3-QTR-D3* MM3-QTR-D350 MM3-QTR-D350L MM3-QTR-D3S

12-strand MTP-LC MML-QTR-DL MML-QTR-DL50 MML-QTR-DL50L MML-QTR-DLS

24-strand MTP-LC MM3-QTR-QL MM3-QTR-QL50 MM3-QTR-QL50L MM3-QTR-QLS

Fiber Optic Adapter Panels

Part # Description

AP1-QTR-S1 12-strand ST, PB Insert, MM/SM ST

AP2-QTR-S1 6-strand ST, PB Insert, MM/SM ST

AP2-QTR-S1S 6-strand ST, Zirconia Insert, SM ST

WS3-QTR 12 Panel Wall Mount

AP5-QTR-S1 8-strand ST, PB Insert, MM/SM ST

AP5-QTR-S1S 8-strand ST, Zirconia Insert, MM/SM ST

AP3-QTR-D350L 12-strand SC Duplex, PB Insert, MM, Aqua SC

AP3-QTR-D3 12-strand SC Duplex, PB Insert, MM, Beige SC

AP3-QTR-D3B 12-strand SC Duplex, PB Insert, MM/SM, Blue SC

AP3-QTR-D8S 12-strand SC Duplex, Zirconia Insert, SM, APC, Green SC

AP3-QTR-D3S 12-strand SC Duplex, Zirconia Insert, SM, Blue SC

APL-QTR-S350 6-strand SC, PB Insert, MM, Aqua SC

APL-QTR-S3 6-strand SC, PB Insert, MM, Beige SC

APL-QTR-S3B 6-strand SC, PB Insert, MM/SM, Blue SC

APL-QTR-S8S 6-strand SC, Zirconia Insert, SM, APC, Green SC

APL-QTR-S3S 6-strand SC, Zirconia Insert, SM, Blue SC

APL-QTR-S0 12-strand MTRJ, MM/SM

APL-QTR-DL50L 12-strand LC Duplex, PB Insert, MM, Aqua LC

APL-QTR-DL* 12-strand LC Duplex, PB Insert, MM, Beige LC

*MM3-QTR-D3 *APL-QTR-DL

FIBER OPTIC HARDWARE

Product Detail Manual

Navigation menu

Versions of this User Manual:

Views

Navigation