572 2 Infrared Thermometer

: Pdf 111960-Attachment 111960-Attachment 095969 Batch5 unilog

Open the PDF directly: View PDF .
Page Count: 3

The Fluke 572-2 Infrared Thermometer is the one product

you can use in high-temperature industrial environments all

around the world. Whether you work in power utility, metal

refining and smelting, glass, cement or petrochemical envi-

ronments, the new 572-2 allows you to carry the most

trusted name in test tools anywhere you need accurate, high-

temperature and high distance-to-spot measurements.

With a straight-forward user interface and soft-key menus,

the Fluke 572-2 makes even complex measurements easy.

Quickly navigate and adjust emissivity, start data logging, or

turn on and off alarms, with just a few pushes of a button.

Technical Data

Product highlights

With a rugged, easy-to-use,

ergonomic design, the Fluke

575-2 can stand up to tough

industrial, electrical, and

mechanical environments.

• Measure -30 °C to 900 °C

(-22 °F to 1652 °F)

• 60:1 distance to spot ratio with

dual laser sighting for fast,

accurate targeting

• Multi-language interface

(user select)

• Current Temperature plus MAX,

MIN, DIF, AVG temperature

displays

• Compatible with standard

mini-connector K-type ther-

mocouples, including ones

you already own and have

installed.

• Adjustable emissivity and pre-

defined emissivity table

• Infrared and thermocouple

temperature on backlit display

• Last reading Hold (20 seconds)

• High and low temperature

alarm

• Data storage and review (99

data sets)

• Tripod mount

• 12 or 24 hour clock

• USB 2.0 computer interface

cable

• FlukeView® Forms Document-

ing Software

• Two-year warranty

572-2 Infrared Thermometer

The best choice when things are really hot

2 Fluke Corporation 572-2 Infrared Thermometer

572-2 specifications

Infrared measurements

Infrared temperature range -30 °C to 900 °C (-22 °F to 1652 °F)

IR accuracy (Calibration geometry with ambient

temperature 23 °C ± 2 °C)

≥ 0 °C: ± 1°C or ± 1 % of the reading, whichever is greater

≥-10 °C to <0 °C: ± 2 °C

<-10 °C: ± 3 °C

≥32 °F: ± 2 °F or ± 1 % of the reading, whichever is greater

≥14 °F to <32 °F: ± 4 °F

<14 °F: ± 6 °F

IR Repeatability ± 0.5 % of reading or ± 0.5 °C (± 1 °F), whichever is greater

Display Resolution 0.1 °C / 0.1 °F

Distance:Spot 60:1 (calculated at 90 % energy)

Minimum spot size 19 mm

Laser sighting Offset dual laser, output <1 mW

Spectral Response 8 μm to 14 μm

Response Time (95 %) <500 ms

Emissivity Digitally adjustable from 0.10 to 1.00 by 0.01 or via built-in table of common materials

Measurement options

Hi/Low alarms Audible and two-color visual

Min/Max/Avg/Dif Yes

Switchable celsius and fahrenheit Yes

Backlight Two levels, normal and extra bright for darker environments

Probe input K-type thermocouple

Simultaneous display of probe and IR temperature

Trigger lock Yes

Data storage 99 points

Display Dot matrix 98 x 96 pixels with function menus

Communication USB 2.0

K-type thermocouple specifications

K-type thermocouple input temperature range -270 °C to 1372 °C (-454 °F to 2501 °F)

K-type thermocouple input accuracy (with ambient

temperature 23 °C ± 2 °C)

< -40 °C: ± (1 °C + 0.2 °/1 °C)

≥ -40 °C: ± 1 % or 1 °C, whichever is greater

< -40 °F: ± (2 °F + 0.2 °/1 °F)

≥ -40 °F: ± 1 % or 2 °F, whichever is greater

K-type thermocouple resolution 0.1 °C/0.1 °F

K-type thermocouple repeatability ± 0.5 % of reading or ± 0.5 °C (± 1 °F), whichever is greater

Measurement range

(K-type thermocouple bead probe)

-40 °C to 260 °C (-40 °F to 500 °F)

Accuracy ± 1.1 °C (± 2.0 °F) from 0 °C to 260 °C (32 °F to 500 °F). Typically within 1.1 °C (2.0 °F) from

-40 °C to 0 °C (-40 °F to 32 °F)

Cable length 1 m (40 in) K-type thermocouple cable with standard miniature thermocouple connector

and bead termination

General specifications

Operating temperature 0 °C to 50 °C (32 °F to 122 °F)

Storage temperature -20 °C to 60 °C (-4 °F to 140 °F)

Relative humidity 10 % to 90 % RH non-condensing up to 30 °C (86 °F)

Operating altitude 2000 meters above mean sea level

Weight 0.322 kg (0.7099 lb)

Power 2 AA Batteries

Battery life 8 hours with laser and backlight on; 100 hours with laser and backlight off, at 100 % duty

cycle (thermometer continuously on)

Safety and compliance IEC 60825-1

FDA Laser Class II

EMC 61326-1

CE Compliance

CMC 沪制01120009

3 Fluke Corporation 572-2 Infrared Thermometer

Ordering information

572-2 Infrared Thermometer

Includes

Infrared thermometer with contact thermometer

capabilities, K-type thermocouple bead probe, USB

2.0 computer interface cable, FlukeView® Forms

Documenting Software, hard carrying case, getting

started guide (print) and user’s manual (CD).

Recommended temperature probes

Probe Usage

80PK-1 The general purpose bead probe is for quick, accurate surface temperatures and air temperatures within ducts,

vent temperatures.

80PK-8 Pipe clamp probes (2) are essential for tracking continuously changing temperature differentials on hydronic

tubing and pipe loops, and good for quick, accurate refrigerant temperatures.

80PK-9 The insulation-piercing probe provides a sharp tip to pierce pipe insulation and flat probe tip for good surface

thermal contact, air temperatures within ducts, and vent temperatures.

80PK-11 Flexible cuff thermocouple temperature probe is a convenient way to attach a thermocouple to a pipe while

keeping hands free.

80PK-25 The piercing probe is the most versatile option. Good for checking air temperature in ducts, surface temperature

under carpets/pads, liquids, thermometer wells, vent temperatures, and for penetrating pipe insulation.

80PK-26 The tapered probe is a good general-purpose gas and surface probe, with a good length and low mass tip casing

for faster reaction to surface and air temperatures.

Fluke Corporation

PO Box 9090, Everett, WA 98206 U.S.A.

Fluke Europe B.V.

PO Box 1186, 5602 BD

Eindhoven, The Netherlands

For more information call:

In the U.S.A. (800) 443-5853 or

Fax (425) 446-5116

In Europe/M-East/Africa +31 (0) 40 2675 200 or

Fax +31 (0) 40 2675 222

In Canada (800)-36-FLUKE or

Fax (905) 890-6866

From other countries +1 (425) 446-5500 or

Fax +1 (425) 446-5116

Web access: http://www.fluke.com

©2013 Fluke Corporation.

Specifications subject to change without notice.

Printed in U.S.A. 6/2013 6000240A_EN

Modification of this document is not permitted

without written permission from Fluke Corporation.

Fluke. The Most Trusted Tools

in the World.