Product Detail Manual

: Pdf 112363-Attachment 1 112363-Attachment_1 781370 Batch5 unilog

Open the PDF directly: View PDF .
Page Count: 2

Commercial Emergency

CTX6 Series

Compac® Thermoplastic

Emergency Unit with Xtest

Project

Type

Model No.

Comments

Specifier’s Reference

CM-22200

rev. 4, 06/29/2012

Options

TD – 15 min. Time Delay

LX – Laser activation of manual test via

handheld remote control transmitter, RLT

(sold separately)

LS – Less Self–Test of lamps

Accessories (Order Separately)

WG5 – Wire Guard

PCS1 – Polycarbonate Vandal Shield

RLT – Remote Laser Transmitter

Green Product Choice: CTX6

codes and standards

• ETL Listed to UL Standard 924

• NFPA 101 (Life Safety Code)

• NFPA 70 (National Electric Code)

construction

• Flame rated, UV stable ABS thermoplastic white

housing.

• Black is available.

• Low profile test switch comes standard on the unit.

• Contemporary design external square style lamp

heads that utilize an innovative track system that

allows for a full range of adjustment for emergency

illumination.

installation

• Snap together quick mount design.

• Universal J-box mounting pattern.

electronics Xtest

• All units utilize a microprocessor and contain the

Xtest self-diagnostic/self-test circuitry.

• Each unit includes low voltage disconnect, AC

lockout, and brownout protection.

• Each unit with Xtest circuitry will automatically

conduct a self-test once a month with the lamps on

to verify all systems are functioning properly. For

complete details regarding Xtest circuitry see spec

sheet CE-17050.

• 120/277VAC selectable input.

• Power Consumption:

120V= 42 mA Line Amps

= 5.1W input Wattage

277V= 22.6 mA Line Amps

= 6.26W input Wattage

lamps

• Standard unit contains two 6 volt, 5.4W

tungsten lamps.

• Units with the “H” option contain two 6 volt, 6W

halogen lamps.

• The 18 Watt unit comes standard with 9W

tungsten lamps.

battery

• 6V Maintenance free sealed lead acid battery.

• Operating temperature range is 65˚F (19˚C) to

85˚F (30˚C).

• Provides a minimum of 90 minutes emergency

illumination.

options

• Time Delay (TD) – After power failure and power

is restored, the lamp will remain illuminated for

a 15 minute period (provided battery capacity

remains).

• Manual Test Activation (LX) – To operate using a

laser pen: passing laser briefly over the remote

sensor simply duplicates the manual button (1, 2, 3)

pushes.

• Less Self TEST (LS) – Lamps will not come on when

the unit performs its automatic monthly self-test

functions.

warranty

• Five year warranty on unit (lamps not included).

Catalog Number Volts Total Wattage Remote1 Housing Color LampType

Lead Calcium:

CTX6 6 12 None White 5.4W tungsten

CTX6B 6 12 None Black 5.4W tungsten

CTX6H 6 12 None White 6W halogen

CTX6BH 6 12 None Black 6W halogen

CTX618 6 18 None White 9W tungsten

CTX618R 6 18 6W White 5.4W tungsten

CTX618HR 6 18 6W White 6W halogen

Footnote:

1 Refer to CA-51300 for matching remote lamp heads.

Contact Factory for Additional Configurations.

Specifications are subject to change without notice.

CM-22200 rev. 4 06/29/2012

©2012 Philips Chloride

All rights reserved.

776SouthGreenStreet•Tupelo,MS38804

p.800.234.1890•f.662.841.5501

Canadian Division

189BullockDrive•Markham,OntarioL3P1W4

p.905.294.9570•f.905.294.9811

CTX6 Series Compac® Thermoplastic Emergency Unit with Xtest

dimensions

5-11/16"

(128.3mm)

5-1/4"

(133.6mm)

11-1/16"

(280.9mm)

photometry

Meets Life Safety Code standard minimum illuminance of 0.1 FC and average

illuminance of 1.0 FC. Assumes open space with no obstructions, mounting

height: 8', ceiling height: 9', and reflectances: 80/50/20. Analysis based on

independently tested photometrics.

3'

Xtest testing specifications

• Automatic Test: The system charger and lamps are continually being

controlled via pre-determined parameters specific to each model

configuration, automatically. The battery is controlled via a true open circuit

test each hour after initial installation. One each month the Xtest System

illuminates lamps under load for 30 minutes, simulating a power outage

with a true charger off condition, without affecting long term battery life.

This is above and beyond the requirements of the National Fire Protection

Association. This gives you unequaled control and confidence, knowing you

are meeting self-test code requirements each and every month.

• Manual Test: A manual test switch allows for the Xtest system to perform

the following tests at any time:

Press Button

Once–5 second test, charger off, no load

Twice–60 second test, charger off, lamps on

Three–90 minute test, charger off, lamps on

6-Second Hold–Fully reinitializes micro-processor.

Pressing once during any test will cancel/abort testing.

Location of sensor for laser activation

of manual test via handheld remote laser

tester (this is an optional feature, specify

“LX” option)

SELF-TEST / DIAGNOSTIC

CHARGER

BATTERY

LAMPS

CHG-TEST

Xtest Status Indicator Panel

AC/Green Charger/Red Batt/Red Lamp/Red Status/Fault Action

On AC power is on/OK None

F Performing Test None

On F F F Lamp/Battery Disconnected or Charger Fault Check connections; if ok, replace circuit board

On F Charger fault Replace circuit board

On F Battery disconnected/fault Check connection or replace battery

On F Lamp disconnected/bad or remote disconnected Check connection then press manual test once to

determine bad lamp/replace lamp or check remote lamp.*

Fault Indications:

Four LED indicators provide visible indication of system status:

*If unit has remote capacity and remote cable is connected to charger board but not connected to

a remote load, then either connect remote load or disconnect cable from charger board.

On=Steady F=Flashing Blank=Off

lamp spacing avg. fc. max. fc. min. fc.

CTX6 5.4W tungsten 24ft. 1.0 2.00 0.1

CTX618 9W tungsten 39ft. 1.4 2.70 0.1

CTX6H 6W halogen 28ft. 1.00 2.00 0.1

Test Numbers:

CTX6 - CSWA

CTX618 - CSWC

CTX6H - CSWD