115905 Catalog

2016-06-25

: Pdf 115905-Catalog 115905-Catalog B1 unilog

Open the PDF directly: View PDF .
Page Count: 100

™

Multi 9™ System Catalog

Catalog

0860CT0201 R11/14

2014

Class 860

CONTENTS

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page

Contents Line 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page x

Contents Line 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page x

Contents Line 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page x

Master Pages

CONTENTS

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

UL and CSA Rated Protection Devices . . . . . . . . . . . . . . . . . . . . . . . . . . .14

IEC 60947-2 Rated Protection Devices . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Ground-Fault Protection Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Additional System Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Time/Current Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Let-Through Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Index of Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

™

0860CT0201 R11/14 Multi 9™ System Catalog

Table of Contents

SECTION 1: INTRODUCTION .............................................................. 7

Multi 9™ Products for Equipment Applications ........................................... 7

System Flexibility ................................................................................... 7

Advantages ........................................................................................... 8

Conformance to Standards ......................................................................... 9

Overview ............................................................................................... 9

UL 489/CSA C22.2 No.5 Standard–Branch Circuit Protection .............. 9

UL 1077 Standard—Supplementary Protection within the Product ..... 10

Comparing Terminology for UL 489/CSA C22.2 No.5 and

1077 Standards ................................................................................... 11

UL 486 Standard—Connection Terminals ........................................... 12

IEC 60947-2 Standard ......................................................................... 12

IEC 60898 Standard ............................................................................ 12

CSA C22.2 Standard ........................................................................... 12

CCC Mark ............................................................................................ 12

UL 508 Standard—Manual Motor Controllers ..................................... 12

SECTION 2: UL AND CSA RATED PROTECTION DEVICES ........... 14

UL 489/CSA C22.2 No.5 Listed 240 Vac C60 Circuit Breakers (AC) ....... 16

Standard Features ............................................................................... 16

Connections ........................................................................................ 17

Standards ............................................................................................ 17

Catalog Numbers ................................................................................ 18

UL 489/CSA C22.2 No. 5 Listed 480Y/277 Vac C60 Circuit

Breakers (AC) ........................................................................................... 19

Benefits ............................................................................................... 19

Standard Features ............................................................................... 19

Connections ........................................................................................ 20

Standards ............................................................................................ 20

Catalog Numbers ................................................................................ 20

UL 489/CSA C22.2 No. 5 Listed C60 Circuit Breakers (DC) .................... 21

Overview ............................................................................................. 21

Catalog Numbers ................................................................................ 21

UL 1077 Recognized C60 Supplementary Protectors .............................. 22

Standards ............................................................................................ 22

Standard Features ............................................................................... 23

Catalog Numbers ................................................................................ 23

SECTION 3: IEC 60947-2 RATED PROTECTION DEVICES ............. 24

N40 Phase + Neutral Circuit Breakers ...................................................... 25

Time/Current Curves ........................................................................... 25

Accessories ......................................................................................... 25

Standards ............................................................................................ 25

Catalog Numbers ................................................................................ 26

IEC Rated C60 Miniature Circuit Breakers ............................................... 27

Standard Features ............................................................................... 27

Catalog Numbers ................................................................................ 28

Catalog Numbers ................................................................................ 29

IEC Rated C120H Circuit Breakers ........................................................... 30

Standard Features ............................................................................... 30

Accessories ......................................................................................... 31

Standards ............................................................................................ 31

Catalog Numbers ................................................................................ 31

™

Multi 9™ System Catalog

SECTION 4: GROUND-FAULT PROTECTION DEVICES .................. 32

Selection Table ......................................................................................... 32

UL 1053 Listed GFP Ground Fault Protectors ..........................................33

Standards ............................................................................................33

Catalog Numbers .................................................................................34

IEC Rated ID Residual Current Switches ..................................................35

Standards ............................................................................................36

Catalog Numbers .................................................................................36

IEC Rated C60 Vigi

Modules for Ground-fault Protection .....................37

Accessories .........................................................................................38

Standards ............................................................................................38

Catalog Numbers .................................................................................38

IEC Rated C120 Vigi Residual Current Circuit Breakers ...........................39

Standards ............................................................................................39

Catalog Numbers .................................................................................39

N40 Vigi Residual Current Circuit Breaker ................................................ 40

Function ...............................................................................................40

Catalog Numbers .................................................................................40

Standards ............................................................................................40

SECTION 5: ACCESSORIES .............................................................. 41

Electrical Auxiliaries .................................................................................. 42

MN Undervoltage Release ..................................................................43

MX + OF Shunt Trip and Auxiliary Switch ........................................... 43

OF Auxiliary Switch .............................................................................44

OFS Auxiliary Switch and Adapter (for GFP and ID RCD) .................. 44

SD Alarm Switch .................................................................................. 44

Comb Bus Bars .........................................................................................45

UL Recognized C60 and N40 Comb Bus Bars ........................................ 45

Tooth Caps for UL Recognized Comb Bus Bars ................................. 45

Connection Comb Bus Bars for C60 UL 1077 Circuit Breakers .......... 46

Connection Comb Bus Bars for C60 UL489 Circuit Breakers ............. 47

IEC Rated C60 Comb Bus Bars .......................................................... 48

End Caps for IEC Rated C60 Comb Bus Bars ....................................49

Connector for IEC Rated Comb Bus Bars ........................................... 49

Tooth Caps for IEC Rated Comb Bus Bars ......................................... 49

Device Shielding ....................................................................................... 49

DIN Rail Spacer ................................................................................... 49

Terminal Screw Shields .......................................................................50

Terminal Covers .................................................................................. 50

Ring Lug Terminal Kit ..........................................................................50

Identification System ................................................................................. 51

Snap-on Marking Symbols ..................................................................51

Operation Devices .....................................................................................52

Rotary Handles .................................................................................... 52

Padlock Attachments ........................................................................... 52

Mounting Accessories ............................................................................... 54

Plug-in Base ........................................................................................54

Front Mounting Bracket (Kit) ................................................................ 54

DIN Rail Mounting Clips ......................................................................55

UL/CSA Recognized Mounting Base for Multi 9 C60 Circuit Breakers ..... 55

Mounting Base Accessories ................................................................ 56

Wire Lug Kit ................................................................................... 56

Multi-Pole Front Mounting Kit .............................................................. 57

Pole Filler ............................................................................................. 57

SECTION 6: ADDITIONAL SYSTEM DEVICES ................................. 58

™

Multi 9™ System Catalog

11/2014

CM Selector Switches ......................................................................... 58

I Current Isolating Switch .................................................................... 60

Status, Display and Control Accessories .................................................. 61

V Signal Lamp ..................................................................................... 61

BP Push Buttons ................................................................................. 62

CH Hour Counter ................................................................................. 63

CI Impulse Counter ............................................................................. 63

Kaedra™ Weatherproof DIN Type Enclosures ......................................... 64

Applications ......................................................................................... 64

Standard Features ............................................................................... 64

Construction ........................................................................................ 64

Installation ........................................................................................... 64

Accessories ......................................................................................... 65

SECTION 7: DIMENSIONS ................................................................. 66

UL 489/CSA C22.2 No. 5 Listed C60 Circuit Breakers ............................. 66

UL 1077 Supplementary Protectors .......................................................... 67

IEC Rated Circuit Breakers ...........................................................................67

UL and IEC Rated Ground-Fault Products ............................................... 68

Accessory Dimensions .............................................................................. 69

Kaedra Weatherproof Mini-Enclosure Dimensions ................................... 75

Kaedra Weatherproof Enclosures ............................................................. 76

SECTION 8: APPLICATIONS ............................................................. 78

Degree of Protection (IP) .......................................................................... 78

Vibration .............................................................................................. 79

Mechanical Shock (IK) ........................................................................ 79

Protection of 400 Hz Circuits ............................................................... 79

Temperature Rating .................................................................................. 80

Typical IEC Grounding Systems ............................................................... 83

Codification of the Grounding Systems ............................................... 83

The TT Grounded Neutral System ...................................................... 83

The IT Grounding System ................................................................... 84

The TN-S Grounding System .............................................................. 84

SECTION 9: TIME/CURRENT CURVES ............................................. 85

UL 489/CSA C22.2 No. 5 and UL 489A Listed C60 Miniature

Circuit Breakers ..................................................................................................85

UL 1077 Recognized Supplementary Protectors ...................................... 86

IEC60947-2 Rated D PN-N Circuit Breakers ............................................ 87

Alternative Current 50/60 Hz ..................................................................... 88

Motor Curve .............................................................................................. 89

SECTION 10: LET-THROUGH CURVES .............................................. 90

UL Listed C60 Miniature Circuit Breakers and UL Recognized C60

Supplementary Protectors ........................................................................ 90

Limitation curves ....................................................................................... 94

INDEX OF PART NUMBERS ................................................................... 97

™

Multi 9™ System Catalog

™

Multi 9™ System Catalog

Section 1—Introduction

11/2014

Section 1—Introduction

Multi 9™ Products for Equipment Applications

Multi 9 modular system of miniature circuit breakers and supplementary protectors, accessories, and

peripherals provides protection of equipment or especially sensitive circuits within the equipment.

Installation labor and space are both minimized by the modular architecture of the Multi 9 system,

whether a single protective device or multiple devices with their accessories are being used.

Schneider Electric offers an extensive line of UL 489/CSA C22.2 No.5 Circuit Breakers and UL 1077

Supplementary Protectors. In addition, a variety of IEC certified Circuit Breakers and Accessories are

available for an original equipment manufacturer (OEM) whose products are destined for export

beyond North America. To an OEM, this means that one family of electrical protection products can be

used regardless of equipment destination.

The Standards include:

Potential applications include semi-conductor machines, communication equipment, process control

panels, computers, medical equipment, electronic controls, transformers, power supplies, and other

electrical equipment.

System Flexibility

The Multi 9 System includes an extensive line of field-installable accessories. Plug-on electrical auxiliaries

include shunt trip, undervoltage release, auxiliary switch, and alarm switch. Other protection devices include

residual current devices, dc circuit breakers, and switches. Control and display devices include signal

lamps, push buttons, and motor operators. There are also mechanical accessories for locking, operating,

shielding, mounting, etc. The following diagram shows many of the Multi 9 system accessories.

• UL 489 Standard for Circuit Breakers

• UL 489A Standard for DC Communication Applications

• UL 1077 Standard for Supplementary Protectors

• UL 1053 Ground Fault Sensing and Relaying Equipment

• IEC 60947-2 Low-voltage switchgear and controlgear - Part

2: Circuit-breakers

• CSA C22.2 No. 5 Standard for Circuit Breakers

• CSA C22.2 No. 235 Supplementary Protectors

• CCC Pending

• C60 Miniature Circuit Breakers are RoHS Compliant

Figure 1: Functional Diagram of Multi 9 System

Impulse

Counter

Hour

Counter

Signal

Lamp

Signal

Lamp

Push

Button

(N.O.)

Signal

Push

Button

(N.C.)

Signal

Motor

Operator

Alarm

Switch

Aux

Switch

MX + OF

Shunt

Trip

Aux

Switch

Under-

voltage

Release

C60

Circuit

Breaker

Vigi or GFP

Residual

Current Device

and

IHP

Time

Switches

Switch

Selector

Switch

DPN-N

Residual

Current

Circuit

Breaker

OFS

Elect.

Accessory

GFP

Ground

Fault

Protector

Status and Display Output

Plug-on Electrical Auxiliaries

Other devices used with or instead of the C60 device

Protected Line

Control Inputs

Switch or

Control

Metering

Device

08603577

™

Multi 9™ System Catalog

Section 1—Introduction

Advantages

Multi 9 C60 circuit breakers and supplementary protectors provide several features which are

important to OEMs. These include:

•

Small, compact size

•

Easy installation on DIN rails

•

Limits let-thru current

•

Resetability, more convenient than fuses

•

Electrical auxiliaries for control and status information

•

Extensive variety of accessories

Better Protection—Multi 9 supplementary protectors and miniature circuit breakers limit let-through

current, providing faster separation of the component from the fault, thereby reducing system damage.

More Selection—More ratings compatible with low-power electronic circuits are available in the range

from 0.5 to 10 A. Others are provided in convenient steps, up to 63 A for the C60 products.

Reduction of Nuisance Tripping—Available with different trip characteristics to meet system needs:

B, C and D curves, depending on the model.

Panel Space Savings—Multi 9 products are compact. Width per pole is only 0.71 in. (18 mm) for the

C60 circuit breaker. All of the products are built in a consistent format with incremental widths of 0.35

in. (9 mm) (therefore the name Multi 9).

Simple Installation—The Multi 9 products mount easily onto a 35 mm DIN mounting rail. Large box

lug terminals (pressure plate type) are suitable for use with copper wiring up to 2 AWG for C60 circuit

breakers and supplemental protectors.

Reverse Feeding— Reverse feeding of line power is permitted.

Reliability—Each C60 miniature circuit breaker has an endurance of 10,000 operation cycles and

voltage withstand of 6000 V impulse rating.

World-Wide Availability—The Multi 9 products are available and supported throughout the world by

Schneider Electric.

From the Power Distribution Specialists—Schneider Electric can be your single source of

protection equipment, with a comprehensive line of products for OEM products or the factory. In

addition to the Multi 9 circuit breakers and supplementary protectors, these products include the

following:

•

QO™ and QOU Miniature Circuit Breakers 10–125 A

•

Compact™ Molded Case Circuit Breakers 15–3200 A

•

Powerpact™ Molded Case Circuit Breakers 15–3000 A

•

Masterpact™ Universal Power Circuit Breakers 250–6300 A

Figure 2: UL 489/CSA C22.2 No. 5 Listed Multi 9 C60 Circuit Breakers

1P 3P2P

™

Multi 9™ System Catalog

Section 1—Introduction

11/2014

Conformance to Standards

Overview

Multi 9 circuit protection products conform to the standards most needed by OEMs—UL 489/CSA C22.2

No.5, UL 1077, CSA C22.2 No. 235, and IEC 60947-2.

Different applications call for circuit protection devices that meet different standards. The Multi 9 family

allows OEMs to use a single family of products in their equipment, whether it is destined for the United

States, Canada or an international market outside of North America. A variety of Multi 9 devices are tested

per Underwriters Laboratories

(UL

) and Canadian Standards Association

(CSA

) Standards as

required by the National Electrical Code

(NEC

) in the United States and the Canadian Electrical Code

(CEC) in Canada. They are also tested per the standards of the International Electrotechnical Commission

(IEC

) and may therefore be used in International Markets where these products meet the requirements.

In this catalog, the products are grouped by the standards they are designed to meet, including:

•

UL 489—Defines rigorous testing requirements for circuit breakers in the United States

•

CSA C22.2 No. 5—Defines rigorous testing requirements for circuit breakers in Canada

•

CSA C22.2 No. 235—Defines requirements for supplementary protectors

•

UL 489A—Limited applications (dc circuits in communications equipment)

•

UL 1077—Defines supplementary protectors for use within electrical equipment protected by

branch circuit breakers

•

IEC 60947-2—International standards for circuit breakers to be used in industrial applications

UL 489/CSA C22.2 No.5 Standard–Branch Circuit Protection

An OEM product as a whole must be appropriately protected from overcurrent conditions, either by

connection in the field to a protected branch circuit (in accordance with NEC) or by inclusion of branch

circuit protection within the product itself. In the United States, these branch circuit protection devices

must comply with the UL 489/CSA C22.2 No.5 Standard for Molded-Case Circuit Breakers. (see UL

489/CSA C22.2 No.5 No. 1 in Figure 3, which is a drawing of a hypothetical piece of OEM equipment

requiring multiple protection devices.)

Applications Requiring UL 489/CSA C22.2 No.5 Listed Circuit Breakers

In some instances, the protective devices being installed in equipment must comply with UL 489/CSA

C22.2 No.5. These include the following situations:

1. If a circuit such as a convenience receptacle could leave the equipment, that circuit must be

protected by a UL 489/CSA C22.2 No.5 branch circuit protection device (see UL 489/CSA C22.2

No.5 No. 2).

2. If a circuit such as to an external motor could leave the equipment, that circuit must be protected by

a UL 489/CSA C22.2 No.5 branch circuit protection device (see UL 489 No. 3).

3. Motors within the equipment should also be protected by a UL 489/CSA C22.2 No.5 device (see UL

489 No. 4).

4. All equipment which requires HACR (Heating, Air Conditioning, and Refrigeration) rating must be

protected by a UL 489/CSA C22.2 No.5 branch circuit protection device (see UL 489 No. 5).

NOTE: The motor control circuit may be protected by a UL 1077 device. It must also have over current

protection even though there is a UL 1077 device downstream.

In general, a UL 489/CSA C22.2 No.5 circuit breaker could also be used in any application for which a

UL 1077 device is allowed, since the UL 489/CSA C22.2 No.5 devices meet or exceed the

requirements of UL 1077 devices. The converse of this is not true, since UL 1077 devices cannot meet

the more stringent UL 489/CSA C22.2 No.5 Standard.

™

Multi 9™ System Catalog

Section 1—Introduction

UL 1077 Standard—Supplementary Protection within the Product

Within the OEM product itself, additional (supplementary) protection for sensitive or critical internal

circuitry may be provided by one or more supplementary circuit protectors. A supplementary protector

is an overcurrent protection device which is specifically designed for OEM applications and which

complies with UL 1077 Standard for Supplementary Protectors for Use in Electrical Equipment.

Under UL 1077, supplementary protectors may be used under the following conditions:

•

When branch overcurrent protection is already provided

•

If short-circuit protection is needed for sensitive devices within the equipment

•

When wiring connected to the supplementary protector does not exit the equipment to external

devices such as receptacles or motors

•

If the UL 1077 device does not provide the only means of disconnecting the product

The following applications illustrated in Figure 3 allow the use of UL 1077 supplementary protectors:

•

The supplementary protection is used to supplement or provide additional protection to sensitive

components inside the equipment (see UL 1077 No. 1). A UL 489/CSA C22.2 No.5 circuit breaker

must be located upstream from the equipment.

•

Critical or sensitive internal circuitry (see UL 1077 No. 2) such as: Computers and microprocessors,

communications equipment, electronic controllers, power supplies and many other types of equipment

•

Motor control circuits may be protected by a UL 1077 device, unless the circuit includes a

transformer (in which case a UL 489/CSA C22.2 No.5 device is required).

™

Multi 9™ System Catalog

Section 1—Introduction

11/2014

NOTE: This is a simplified summary of the standards. Refer to applicable codes for specific applications.

Comparing Terminology for UL 489/CSA C22.2 No.5 and 1077 Standards

The terms used to differentiate these products can cause confusion if a user is not careful. Misapplying

the terms may result in misapplication of the products.

Any one of the following terms can be used to identify supplementary protectors:

Any of the following terms can be used to identify circuit breakers:

Figure 3: Guidelines for Application of UL 489/CSA C22.2 No.5 Circuit Breakers and UL 1077 Supplementary Protectors

Equipment Enclosure

Feeder or

Branch

Circuit UL 489/CSA C22.2 No.5 Listed Molded Case Circuit Breaker (MCCB)

or Miniature Circuit Breaker (MCB)

Protected by

Branch

Circuit Breaker

Electronics

Other

Sensitive

Devices

Miscellaneous

Devices

External

Motor

Internal

Motor

Control

HACR

UL 489

UL 1077

UL 489

Internal

Receptacle External

Receptacle

UL 1077

Applications Permitting Supplementary Protectors

Supplements or provides additional protection for

sensitive electronics inside the equipment.

Used on the load side of branch circuit protection to

protect critical or sensitive internal circuitry such as:

• Computers and microprocessors

• Communications equipment

• Electronic controllers

• Power supplies

• Many other types of equipment

Permitted for protection of motor control circuits

NEC 430-72, unless transformers are in circuit,

then UL 489/CSA C22.2 No.5.

UL 489/CSA C22.2 No.5

Applications Requiring Branch Circuit Protection

Protects conductors entering the OEM equipment.

This required UL 489/CSA C22.2 No.5 device may be

provided integral to the OEM equipment or be

external as part of the distribution system.

May act as branch circuit protection

if it protects the conductor to the utilization equipment.

Required to protect convenience receptacle circuits

(internal or external)

Required to protect an external load circuit leaving

the equipment

Required for motors in the equipment

Required for HACR equipment

(Heating, Air Conditioning, and Refrigeration)

08603335

•

Supplementary protector

•

UL Recognized

•

UL 1077

•

The UL symbol

•

Circuit breaker

•

UL Listed

•

UL 489/CSA C22.2 No.5

•

The UL symbol

™

Multi 9™ System Catalog

Section 1—Introduction

UL 486 Standard—Connection Terminals

The UL 486 Standard applies to compression wiring connection terminals. It is a requirement for

connections of a UL 489/CSA C22.2 No.5 circuit breaker. Although it is not a requirement for UL 1077

Recognized devices, UL 486 Rated terminals are included on those Multi 9 products. This allows the

user to apply field wiring directly to any of these devices, without using intermediate, UL rated terminal

blocks.

The connectors on Multi 9 devices are Rated UL 486A-B, which applies to copper conductors.

These standards apply to field-wired terminals that are an integral part of the equipment. Criteria

includes static heating tests, secureness tests, and pull-out tests.

IEC 60947-2 Standard

In countries which follow the IEC Standards, IEC 60947-2 is used for most industrial applications of

circuit protection. IEC 60947-2 does not distinguish between the two levels of protection equivalent to

UL 489/CSA C22.2 No.5 circuit breakers and 1077 supplementary protectors. Therefore, in equipment

like that illustrated in figure 3, if IEC guidelines apply, then all of the devices could be selected from the

IEC Rated portion of this catalog.

IEC 60898 Standard

The IEC 60898 Standard is less stringent than 60947-2. It applies primarily to residential applications

of circuit breakers in countries adhering to IEC Standards, and is not generally applicable to OEMs.

CSA C22.2 Standard

The CSA (Canadian Standards Association) C22.2 Standards closely correspond to the UL Standards:

CSA C22.2 No. 5-02 (harmonized to UL 489/CSA C22.2 No.5) and CSA C22.2 No. 235 (equivalent to

UL 1077). All UL rated devices also have the corresponding CSA rating, unless otherwise noted.

CCC Mark

The China Compulsory Certification (CCC) mark is a new safety and quality mark system. Compulsory

Product Certification System (CPCS) prohibits the sale or importation of equipment under the scope of

the law that does not bear the CCC Mark issued by a Designated Certification Body (DCB). The CCC

Mark covers both safety and Electromagnetic compatibility.

The CPCS regulates twenty-two different product groups, which include the following:

Electrical wires and cables; switches for circuits, installation protective and connection devices; low-

voltage electrical apparatus; small power motors; electric tools; welding machines; household and

similar electrical appliances; audio and video apparatus; information technology equipment; lighting

apparatus; telecommunications terminal equipment; motor vehicles and safety parts; motor vehicle

tires; safety glass; agricultural machinery; latex products; medical devices; fire fighting equipment;

detectors for intruder alarm systems; wireless local area network equipment; security and protection

equipment; and decoration and renovation products.

UL 508 Standard—Manual Motor Controllers

UL Standard 508 covers industrial control equipment, specifically for motor control functions. It covers

individual devices as well as assemblies.

There are UL 508 Listed manual motor controllers that look much like miniature circuit breakers, and

have thermal settings and instantaneous settings similar to circuit breakers. These are specialized

devices and cannot be used for a wide range of applications, as can UL 1077 and UL 489/CSA C22.2

No.5 devices.

Like UL 1077 supplementary protectors, a UL 508 Listed manual motor controller (or a group of them)

must be protected by a UL 489/CSA C22.2 No.5 Listed branch circuit breaker.

CCC Mark

™

Multi 9™ System Catalog

Section 1—Introduction

11/2014

Manual motor controllers are available from Schneider Electric (Telemecanique products GV2 and

GV3) but are not included in this catalog.

Table 1: Comparison Summary of Applicable UL and IEC Standards

Characteristic UL 489/CSA C22.2 No. 5 UL 1077/CSA C22.2 No. 235 IEC 60947-2

Labeling UL Listed UL Recognized component IEC Certified device

Nomenclature Circuit breakers Supplementary protectors Circuit breakers or supplementary protectors

Dielectric test (for 240

Vac)

2 times rated plus 1000 V for 1 minute

(1,480 at 240 Vac)

2 times rated plus 1,000 V for 1 minute

(1,480 at 240 Vac) 1,500 V

Interrupting rating 10 kA at 240 Vac 10 kA at 240 Vac 20 kA at 240 Vac

Overload protection 50 operations at 600% rating 50 operations at 150% rating 12 operations at 600% rating

Service capacity Must be operational after two interruptions

May be tested in series with branch circuit

device and may become inoperable after

test

Must be operational after two interruptions

Calibration test 200% In, 2 minutes max. (0–30 A) Per manufacturer’s trip curve At 200% In, time shall not exceed

manufacturer’s stated value

Calibration temperature 25°C (77°F), unless other value specified by

manufacturer Manufacturer must specify Manufacturer must specify

Testing temperature 25°C (77°F) ambient, 50°C (122°F) rise max.

at terminals

25°C (77°F) ambient, 50°C (122°F) rise max.

at field wiring terminals; 65°C (149°F) rise

max. on factory wiring terminals

At 25°C (77°F) ambient, 80°C (176°F) rise

max. at terminals

Endurance

6000 operations at rated current and

voltage, 75-80% PF, plus 4000 operations at

no load

6000 operations at rated current and

voltage, 75-80% PF

1500 operations at rated current and

voltage, 75-80% PF

Air spacing 3/4 in. (20.1 mm) 3/8 in. (9.53 mm) See dielectric

Surface spacing 1-1/4 in. (31.8 mm) 1/2 in. (12.7 mm) See dielectric

Test and follow up tests Initial, periodic and quarterly follow-up tests

observed by UL representative

Initial tests observed by UL representative,

plus quarterly visual follow-up inspection by

Conducted by manufacturer

™

Multi 9™ System Catalog

Section 2—UL and CSA Rated Protection Devices

The Multi 9 system includes several families of miniature circuit protection devices that have the UL

ratings required in the United States and some other countries. The products are summarized below

and are described in detail on the following pages. They include the following families:

•

UL Listed C60 240 V Circuit Breakers (UL 489/CSA C22.2 No.5)

•

UL Listed C60 480 V Circuit Breakers (UL 489/CSA C22.2 No.5)

•

UL Listed C60 Circuit Breakers for use in Communication Equipment (UL 489A) not CSA certified

•

UL Recognized C60 Supplementary Protectors (UL 1077 and CSA C22.2 No. 235)

NOTE: Protection devices with only IEC ratings are described in Section 3, while accessories for both

the UL and IEC devices are described in Section 5.

Table 2: Specifications for UL 489/CSA C22.2 No.5 Circuit Breakers

Ratings per UL Standards UL 489/CSA C22.2 No.5 C60

(240 Vac)

UL 489/CSA C22.2 No.5 C60

(480Y/277 Vac)

Number of Poles 1P 2P 3P 1P 2P 3P

Rated Current at 77°F (25°C) 0.5–20 A 25–35 A 0.5–35 A 0.5–35 A 0.5–20 A 1–20 A 1–20 A

Interrupting Ratings

as per UL 489/CSA C22.2 No.5

AC 50/60 Hz

120 V

240 V

277 V

480Y/277 V

10 kA

—

10 kA

5 kA

—

10 kA

—

10 kA

—

10 kA

—

10 kA

—

10 kA

DC 60 V

125 V

10 kA

—

10 kA

—

Ultimate Breaking Capacity (Icu)

as per IEC 60947-2 AC 50/60 Hz

240 V

415 V

440 V

10 kA

—

20 kA

10 kA

6 kA

20 kA

10 kA

6 kA

10 kA

—

10 kA

6 kA

10 kA

6 kA

Service Breaking Capacity (Ics) (%Icu) 75% 75% 75% 75% 75% 75% 75%

Magnetic Setting (Times

Ampere Rating)

B curve

C curve

D curve

—

7 to 10

10 to 14

—

7 to 10

10 to 14

Dimensions (in./mm)

Width 0.71/18 0.71/18 1.42/36 2.13/54 0.71/18 1.42/36 2.13/54

Height box/box

ring/ring1

4.21/107

4.86/123.4

4.21/107

4.86/123.4

4.21/107

4.86/123.4

4.21/107

4.86/123.4

5.56/141

Depth 3.00/76 3.00/76 3.00/76 3.00/76 3.00/76 3.00/76 3.00/76

Weight (oz./g) max. box/box

ring/ring

4.4/136

5.2/161

4.4/136

5.2/161

8.7/271

10.3/321

13.1/407

15.5/482

5.3 (166)

10.6/332

15.9 (498)

1Fingersafe 240 V C60 circuit breaker ring terminal dimensions are same as the 480 V C60 circuit breaker.

™

Multi 9™ System Catalog

Section 2—UL and CSA Rated Protection Devices

11/2014

Figure 4: UL 1077 Recognized C60 Supplementary Protectors

Table 3: Specifications for UL 1077 Recognized Supplementary Protectors

Ratings per UL Standards UL 1077 C60

Number of Poles 1P 2P 3P 4P

Rated Current at 77°F (25°C) 0.5–63 A 0.5–63 A 0.5–63 A 0.5–63 A

Interrupting Ratings

as per UL 1077

50/60 Hz

120 Vac

240 Vac

277 Vac

480Y/277 Vac

10 kA

5 kA

—

10 kA

—

5 kA

—

10 kA

—

5 kA

—

10 kA

—

5 kA

—65 Vdc

125 Vdc

10 kA

—

10 kA

—

Ultimate Breaking

Capacity (Icu) as per

IEC 60947-2

50/60 Hz

240 Vac

415 Vac

440 Vac

10 kA

3 kA

—

20 kA

10 kA

6 kA

20 kA

10 kA

6 kA

20 kA

10 kA

6 kA

Service Breaking Capacity (Ics) (%Icu) 75% 75% 75% 75%

Plug-On Auxiliary Modules with Mechanical Linkage:

MN Undervoltage Trip

MX + OF Shunt Trip/Auxiliary Switch

OF Auxiliary Switch

SD Alarm Switch

Magnetic Setting

B Curve

C Curve

D Curve

Between 3.2 and 4.8 Times Ampere Rating

Between 7 and 10 Times Ampere Rating (Between 7 and 14 for dc)

Between 10 and 14 Times Ampere Rating (No DC Rating for D Curve)

Dimensions (in./mm)

Width

Height

Depth

0.71/18

3.19/81

3.00/76

1.42/36

3.19/81

3.00/76

2.13/54

3.19/81

3.00/76

2.84/72

3.19/81

3.00/76

Weight (oz./g) 3.85/110 7.70/220 11.55/330 15.40/440

1P 2P 4P3P

™

Multi 9™ System Catalog

Section 2—UL and CSA Rated Protection Devices

UL 489/CSA C22.2 No.5 Listed 240 Vac C60 Circuit Breakers (AC)

A selected range of Multi 9 circuit breakers rated 240 V are UL 489/CSA C22.2 No.5 Listed. Unlike UL

1077 Supplementary Protectors, these UL 489/CSA C22.2 No.5 circuit breakers can be used for

branch circuit protection as required by the National Electrical Code.

As shown in tables 5 and 6 the UL 489/CSA C22.2 No.5 Listed products are available in

C and D curves. They include devices ranging from 0.5 to 35 A.

Standard Features

•

Fast closing: Allows increased withstand to the high inrush currents of some loads.

•

Trip-free mechanism: Contacts cannot be held in the I-ON position when the C60 circuit breaker is

tripped automatically.

•

Positive indication of contact disconnect. Green mechanical indication on front face of circuit

breaker shows that all poles are open.

•

C curve: Overcurrent protection for all application types. Magnetic release operates from 7 to 10

times ampere rating (7 to 14 for DC applications).

Figure 5: UL 489/CSA C22.2 No.5 Listed Multi 9 C60 Circuit Breakers

Table 4: Specifications for UL 489/CSA C22.2 No.5 240 V Listed C60 Circuit Breakers

High Voltage Withstand 6 kV

Connector: Box Lug

Rating UL 486A File No. E216919 (Use with Copper Wire Only)

Connection

0.5–25 A: 14–4 AWG (2–25 mm2) Cables

Torque to 22 lb-in. (2.48 N•m)

30–35 A: 14–2 AWG (1–35 mm2) Cables

Torque to 31 lb-in. (3.52 N•m)

Connector: Ring Tongue

Use Single UL Listed or CSA Certified

Insulated Ring Tongue Only

Screw dia. 0.2 in. (5 mm)

Torque to 18 lb-in. (2.03 N•m)

Max Ring Terminal Width 0.54 in. (14 mm)

Mounting 35 mm DIN rail

Degree of Protection Case IP40 as per IEC 529

Terminals IP20

Temperatures

Calibration

Storage

Operating

25°C (77°F)

-40 to 80°C (-40 to 176°F)

-30 to 70°C (-22 to 158°F)

Plug-On Auxiliary Modules with

Mechanical Linkage:

MN Undervoltage Trip

MX + OF Shunt Trip/Auxiliary Switch

OF Auxiliary Switch

SD Alarm Switch

Tropicalization Treatment 2 Relative Humidity: 95% at 131°F (55°C)

Number of Operating Cycles Electrical (O-C) 6,000 load, 4,000 no-load

See specifications Table 2 on page 14 for dimensions, weights and interrupting ratings

1P 2P 3P

™

Multi 9™ System Catalog

Section 2—UL and CSA Rated Protection Devices

11/2014

•

D curve: Overcurrent protection for loads with high inrush currents (motors, transformers).

Magnetic release operates between 10 and 14 times ampere rating (no dc rating for D curve).

•

Suitable for reverse feeding.

•

Allows locking in O-OFF position using padlock attachment.

Connections

Three versions of field wiring connectors are available for the 240 Vac UL 489/CSA C22.2 No.5 Listed

devices:

•

Box lug, meeting UL 486A requirements

•

Ring tongue terminal with 5 mm screw

•

Ring Tongue terminals with Fingersafe (IP20) shrouds

The circuit breakers can be ordered with the following combinations of connectors:

•

Line terminal box lug/load terminal box lug

•

Line terminal ring tongue/load terminal ring tongue (for fingersafe version, add -F suffix to catalog

number)

Standards

•

UL 489 Circuit Breaker: File No. E215117

•

Single-pole 15–20 A is UL Listed as SWD (switching duty).

•

1-, 2-, and 3-pole 15–35 A are HID (high intensity discharge) rated.

•

CSA C22.2 No. 5.1 Circuit Breakers: File No. 179014

•

IEC 60947-2

•

CE Marked

Figure 6: Connection Options for 240 Vac UL 489/CSA C22.2 No.5 Listed Devices

Box Lug

Ring

Tongue

Ring

Tongue

Fingersafe

Ring

Tongue

Fingersafe

Ring

Tongue

™

Multi 9™ System Catalog

Section 2—UL and CSA Rated Protection Devices

Catalog Numbers

NOTE: UL 489/CSA C22.2 No.5 Listed Multi 9 circuit breakers are calibrated at 25°C (77°F). Please

refer to the rating tables (page 81) for applications at temperatures greater than 25°C (77°F).

NOTE: The NEC requires that the continuous load applied to the circuit breaker shall not exceed 80%

of the circuit breaker ampere rating.

Table 5: Catalog Numbers for C Curve, UL 489/CSA C22.2 No.5 Listed 240 Vac C60

Miniature Circuit Breakers (Box Lug and Ring Tongue Terminal Combinations)

Rating 1P 2P 3P

Box/Box Ring/Ring

1IP-20 Fingersafe ring tongue terminals may be ordered with an F suffix (example: 60210F).

Box/Box Ring/Ring

0.5 A

1 A

1.5 A

60100

60101

60102

60200

60201

60202

60134

60135

60136

60234

60235

60236

—

60168

60169

—

60268

60269

2 A

3 A

4 A

60103

60104

60105

60203

60204

60205

60137

60138

60139

60237

60238

60239

60170

60171

60172

60270

60271

60272

5 A

6 A

7 A

60106

60107

60108

60206

60207

60208

60140

60141

60142

60240

60241

60242

60173

60174

60175

60273

60274

60275

8 A

10 A

13 A

60109

60110

60111

60209

60210

60211

60143

60144

60145

60243

60244

60245

60176

60177

60178

60276

60277

60278

15 A

20 A

25 A

60112

60113

60114

60212

60213

60214

60146

60147

60148

60246

60247

60248

60179

60180

60181

60279

60280

60281

30 A

35 A

60115

60116

60215

60216

60149

60150

60249

60250

60182

60183

60282

60283

Table 6: Catalog Numbers for D Curve, UL 489/CSA C22.2 No.5 Listed 240 Vac C60

Miniature Circuit Breakers (Line/Load as Box Lug or Ring Tongue Terminals)

Rating 1P 2P 3P

Box/Box Ring/Ring

1IP-20 Fingersafe ring tongue terminals may be ordered with an F suffix (example: 60210F).

Box/Box Ring/Ring

0.5 A

1 A

1.5 A

60117

60118

60119

60217

60218

60219

60151

60152

60153

60251

60252

60253

—

60184

60185

—

60284

60285

2 A

3 A

4 A

60120

60121

60122

60220

60221

60222

60154

60155

60156

60254

60255

60256

60186

60187

60188

60286

60287

60288

5 A

6 A

7 A

60123

60124

60125

60223

60224

60225

60157

60158

60159

60257

60258

60259

60189

60190

60191

60289

60290

60291

8 A

10 A

13 A

60126

60127

60128

60226

60227

60228

60160

60161

60162

60260

60261

60262

60192

60193

60194

60292

60293

60294

15 A

20 A

25 A

60129

60130

60131

60229

60230

60231

60163

60164

60165

60263

60264

60265

60195

60196

60197

60295

60296

60297

30 A

35 A

60132

60133

60232

60233

60166

60167

60266

60267

60198

60199

60298

60299

™

Multi 9™ System Catalog

Section 2—UL and CSA Rated Protection Devices

11/2014

UL 489/CSA C22.2 No. 5 Listed 480Y/277 Vac C60 Circuit

Breakers (AC)

The UL 489/CSA C22.2 No.5 Listed 480Y/277 Vac Multi 9 C60 miniature circuit breakers can be used

in 480Y/277 Vac systems. With amperages from 0.5 A to 20 A, they are ideal for fuse replacement, yet

carry the UL 489/CSA C22.2 No.5 Listing that is required for branch circuit applications. See

specifications in Table 2 on page 14 for dimensions, weights, and interrupting ratings.

Benefits

•

Satisfies customer’s preferences to use circuit breakers instead of fuses.

•

Eliminates costs of spare fuses, blown fuse indicators, additional wiring, etc.

•

Reduces concerns and uncertainty of misapplying a UL 1077 supplementary protector where a

UL 489 branch circuit breaker is required.

•

Facilitates one common design for UL 489/CSA C22.2 No.5, CSA and IEC applications.

•

Simplifies installation with a compact, DIN-mounted circuit breaker that accepts a wide range of

accessories.

•

Offers alternative terminations for ring terminals or cable.

Standard Features

•

Fast closing: Allows increased withstand to the high inrush currents of some loads.

•

Trip-free mechanism: Contacts cannot be held in the I-ON position when the circuit breaker is

tripped automatically.

•

Positive indication of contact disconnect. Green mechanical indication on front face of device

shows that all poles are open.

•

C curve: Overcurrent protection for all application types. Magnetic release operates from 7 to 10

times ampere rating. (7 to 14 for dc)

•

D curve: Overcurrent protection for loads with high inrush currents (motors, transformers).

Magnetic release operates between 10 and 14 times ampere rating (no dc rating for D curve).

•

Suitable for reverse feeding

•

Allows locking in O-OFF position using padlock attachment.

Table 7: Specifications for UL 489/CSA C22.2 No.5 Listed 480Y/277 Vac C60 Circuit

Breakers

Interruption Rating 2P and 3P

480Y/277 V @ 10kA

277 Vac @ 10kA

Amperage 0.5 A through 20 A

Construction 1P, 2P and 3P

Magnetic Trip Curves C-curve

D-curve

7 to 10 Times Ampere Rating

10 to 14 Times Ampere Rating

UL 486E Listed Lug 18–16 AWG (1–1.5 mm2), Cu Only Stranded Wire:

14–10 AWG (2–5 mm2), Cu Only Solid or Stranded Wire

Torque to 7 lb-in (0.68 N•m)

Torque to 14 lb-in (1.6 N•m)

Ring Tongue Screw 5 mm Torque to 18 lb-in (2 N•m)

Plug-On Auxiliary Modules With

Mechanical Linkage:

MN Undervoltage Trip

MX + OF Shunt Trip/Auxiliary Switch

OF Auxiliary Switch

SD Alarm Switch

Mounting 35 mm DIN Rail

See selection Table 2 on page 14 for dimensions, weights, and interrupting ratings.

™

Multi 9™ System Catalog

Section 2—UL and CSA Rated Protection Devices

Connections

Two versions of field wiring connectors are available:

•

Single-barrel lug with binding screws for two 18–10 AWG wires.

•

Crimp-type ring tongue terminal for up to 8 AWG wire.

Both of these terminals provide fingersafe ingress protection per IP20 of IEC EN60529. This feature

reduces the potential of incidental contact with live circuit breaker components.

Standards

•

UL 489/CSA C22.2 No.5 Listed

•

IEC 60947-2

•

CE Marked

Catalog Numbers

Table 8: Catalog Numbers for UL 489/CSA C22.2 No.5 Listed 480Y/277 V C60 Miniature

Circuit Breakers (AC)

Rating

Single Barrel Wire Lug Ring-Tongue Terminal

1P 2P 3P 1P 2P 3P

C-curve, 7–10 Times Ampere Rating

0.5 A

1 A

2 A

MGN61300

MGN61301

MGN61302

—

MGN61312

MGN61313

—

MGN61323

MGN61324

MGN61366

MGN61367

MGN61368

—

MGN61378

MGN61379

—

MGN61389

MGN61390

3 A

4 A

5 A

MGN61303

MGN61304

MGN61305

MGN61314

MGN61315

MGN61316

MGN61325

MGN61326

MGN61327

MGN61369

MGN61370

MGN61371

MGN61380

MGN61381

MGN61382

MGN61391

MGN61392

MGN61393

6 A

8 A

10 A

MGN61306

MGN61307

MGN61308

MGN61317

MGN61318

MGN61319

MGN61328

MGN61329

MGN61330

MGN61372

MGN61373

MGN61374

MGN61383

MGN61384

MGN61385

MGN61394

MGN61395

MGN61396

15 A

20 A

MGN61309

MGN61310

MGN61320

MGN61321

MGN61331

MGN61332

MGN61375

MGN61376

MGN61386

MGN61387

MGN61397

MGN61398

D-curve, 10–14 Times Ampere Rating

0.5 A

1 A

2 A

MGN61333

MGN61334

MGN61335

—

MGN61345

MGN61346

—

MGN61356

MGN61357

MGN61399

MGN61400

MGN61401

—

MGN61411

MGN61412

—

MGN61422

MGN61423

3 A

4 A

5 A

MGN61336

MGN61337

MGN61338

MGN61347

MGN61348

MGN61349

MGN61358

MGN61359

MGN61360

MGN61402

MGN61403

MGN61404

MGN61413

MGN61414

MGN61415

MGN61424

MGN61425

MGN61426

6 A

8 A

10 A

MGN61339

MGN61340

MGN61341

MGN61350

MGN61351

MGN61352

MGN61361

MGN61362

MGN61363

MGN61405

MGN61406

MGN61407

MGN61416

MGN61417

MGN61418

MGN61427

MGN61428

MGN61429

15 A

20 A

MGN61342

MGN61343

MGN61353

MGN61354

MGN61364

MGN61365

MGN61408

MGN61409

MGN61419

MGN61420

MGN61430

MGN61431

™

Multi 9™ System Catalog

Section 2—UL and CSA Rated Protection Devices

11/2014

UL 489/CSA C22.2 No. 5 Listed C60 Circuit Breakers (DC)

Overview

A portion of the range of UL 489/CSA C22.2 No.5 circuit breakers are also Listed by UL for use with dc

circuits. The specifications are the same as the UL 489/CSA C22.2 No.5 circuit breakers, with the

following exceptions:

•

Number of poles: 1 and 2

•

Time/current curve: C curve

•

Magnetic setting of C curve: between 7 and 14 times ampere rating

•

DC voltage (nominal): 1 pole—60 Vdc, 2 pole—125 Vdc

•

Connection: box lug, ring/ring only (same torque)

Catalog Numbers

Table 9: Specifications for UL 489/CSA C22.2 No.5 C60 DC Circuit Breakers

Ratings per UL Standards UL 489/CSA C22.2 No.5 C60 (DC)

Number of Poles 1 2

Rated Current (A) at 77°F (25°C) 60 Vdc

Interrupting Ratings per UL 489/CSA C22.2 No.5

(kA)

60 Vdc 10 —

125 Vdc — 10

Service Breaking Capacity (Ics) (%Icu) 75% 75%

Magnetic Setting (Times Ampere Rating)

B curve — —

C Curve 7 to 14 7 to 14

D Curve — —

Dimensions

Width 0.71 in. (18 mm) 1.42 in. (36 mm)

Height (Box/Box) 4.21 in. (107 mm) 4.21 in. (107 mm)

Depth 3.00 in. (76 mm) —

Weight (Max.) 4.4 oz. (136 g) 8.7 oz. (271 g)

Load

12 in. Min.

–

08603438

2-Pole Wiring

Diagram

Table 10: Catalog Numbers for UL 489/CSA C22.2 No.5 C60 Listed Miniature Circuit Breakers

(DC)

1The dc catalog numbers are the same as the UL 489/CSA C22.2 No.5 ac equivalents.

Rating

C Curve

Rating

C Curve

1P,

Box/Box Ring/Ring 2P,

Box/Box Ring/Ring 1P,

Box/Box Ring/Ring 2P,

Box/Box Ring/Ring

0.5 A

1 A

60100

60101

60200

60201

60134

60135

60234

60235

10 A

13 A

60110

60111

60210

60211

60144

60145

60244

60245

1.5 A

2 A

60102

60103

60202

60203

60136

60137

60236

60237

15 A

20 A

60112

60113

60212

60213

60146

60147

60246

60247

3 A

4 A

60104

60105

60204

60205

60138

60139

60238

60239

25 A

30 A

60114

60115

60214

60215

60148

60149

60248

60249

5 A

6 A

60106

60107

60206

60207

60140

60141

60240

60241

35 A

40 A

60116

—

60216

—

60150

—

60250

—

7 A

8 A

60108

60109

60208

60209

60142

60143

60242

60243

50 A

63 A

—

™

Multi 9™ System Catalog

Section 2—UL and CSA Rated Protection Devices

UL 1077 Recognized C60 Supplementary Protectors

The UL 1077 products are intended for use as supplementary protectors to provide overcurrent

protection within appliances or electrical equipment where branch circuit protection is already provided

or is not required.

As shown in the table of catalog numbers below, the UL 1077 Recognized products are available in B,

C and D curves. They include devices ranging from 0.5 A to 63 A.

Standards

•

UL 1077 Circuit Breaker, File No. E90509

•

CSA C22.2 No. 235 File No. 179014

•

IEC 60947-2

•

CE Marked

Figure 7: UL 1077 Recognized C60N Supplementary Protectors

Table 11: Specifications for UL 1077 Recognized C60 Supplementary Protectors

Package Size 0.71 in. (18 mm) Width per Pole

Voltage Nominal Voltage

High Voltage Withstand

480Y/277 Vac

6 kV

Connection, Box Lug

UL 486A File No. E90509 Pending

Cable: 0.5–25 A: 14–4 AWG (2–25 mm2) Cu Only Torque 22 lb-in (2.49 N•m)

Cable: 30–63 A: 14–2 AWG (2–35 mm2) Cu Only Torque 31 lb-in (3.50 N•m)

Optional Ring Terminal Kit Screw Dia.: 0.2 in. (5mm) Torque 18 lb-in (2.03 N•m)

Mounting 35 mm DIN rail

Time-Current Curves B, C, and D Curves

Degree of Protection as per

IEC 68-2-30

Case IP40 as per IEC 529

Terminals IP20

Temperatures

Calibration 25°C (77°F)

Storage -40 to 80°C (-40 to 176°F)

Operating -30 to 70°C (-22 to 158°F)

Tropicalization Treatment 2 Relative Humidity: 95% at 131°F (55°C)

Number of Operating Cycles: Electrical (O-C) 10,000 at 0.5–63 A

See Specification Table 3 on page 15 for dimensions, weights and interrupting ratings.

1P 2P 3P 4P

™

Multi 9™ System Catalog

Section 2—UL and CSA Rated Protection Devices

11/2014

Standard Features

•

Trip-free mechanism: Contacts cannot be held in the on position when the C60 is tripped automatically.

•

Positive indication of contact disconnect. Green mechanical indication on front face of device

shows that all poles are open.

•

B curve: Overcurrent protection for sensitive equipment (computers, electronic devices, etc.).

Magnetic release operates between 3.2 and 4.8 (between 3.2 and 6.8 for dc).

•

C curve: Overcurrent protection for all application types. Magnetic release operates from 7 to 10

times ampere rating (between 7 and 14 for dc).

•

D curve: Overcurrent protection for loads with high inrush currents (motors, transformers).

Magnetic release operates between 10 and 14 times ampere rating (no dc rating).

•

Allows locking in O-OFF position using padlock attachment.

•

Suitable for reverse feeding.

For rating and dimensional information, see Table 3 on page 15, Specifications for UL 1077

Recognized Supplementary Protectors.

Catalog Numbers

Table 12: Catalog Numbers for UL 1077 Recognized C60 Supplementary Protectors

Rating

B Curve C Curve D Curve

1P 2P 3P 4P 1P 2P 3P 4P 1P 2P 3P 4P

0.5 A

1 A

1.2 A

1.5 A

—

MG24110

MG17402

MG17403

—

MG24125

MG17432

MG17433

—

MG24140

—

MG24155

—

MG17411

MG24425

MG17412

MG17413

—

MG24442

MG17442

MG17443

—

MG24459

—

MG24476

—

MG17421

MG24500

MG17422

MG17423

—

MG24516

MG17452

MG17453

—

MG24532

—

MG24548

—

2 A

3 A

4 A

5 A

MG24111

MG24112

MG24113

MG17404

MG24126

MG24127

MG24128

MG17434

MG24141

MG24142

MG24143

—

MG24156

MG24157

MG24158

—

MG24426

MG24427

MG24428

MG17414

MG24443

MG24444

MG24445

MG17444

MG24460

MG24461

MG24462

—

MG24477

MG24478

MG24479

—

MG24501

MG24502

MG24503

MG17424

MG24517

MG24518

MG24519

MG17454

MG24533

MG24534

MG24535

—

MG24549

MG24550

MG24551

—

6 A

7 A

8 A

10 A

MG24114

MG17405

MG24115

MG24116

MG24129

MG17435

MG24130

MG24131

MG24144

—

MG24145

MG24146

MG24159

—

MG24160

MG24161

MG24430

MG17415

MG24431

MG24432

MG24447

MG17445

MG24448

MG24449

MG24464

—

MG24465

MG24466

MG24481

—

MG24482

MG24483

MG24504

MG17425

MG24505

MG24506

MG24520

MG17455

MG24521

MG24522

MG24536

—

MG24537

MG24538

MG24552

—

MG24553

MG24554

13 A

15 A

16 A

20 A

MG24117

MG17406

MG24118

MG24119

MG24132

MG17436

MG24133

MG24134

MG24147

MG17461

MG24148

MG24149

MG24162

—

MG24163

MG24164

MG24433

MG17416

MG24434

MG24435

MG24450

MG17446

MG24451

MG24452

MG24467

MG17466

MG24468

MG24469

MG24484

—

MG24485

MG24486

MG24507

MG17426

MG24508

MG24509

MG24523

MG17456

MG24524

MG24525

MG24539

MG17471

MG24540

MG24541

MG24555

—

MG24556

MG24557

25 A

30 A

32 A

35 A

MG24120

MG17407

MG24121

MG17408

MG24135

MG17437

MG24136

MG17438

MG24150

MG17462

MG24151

MG17463

MG24165

—

MG24166

—

MG24436

MG17417

MG24437

MG17418

MG24453

MG17447

MG24454

MG17448

MG24470

MG17467

MG24471

MG17468

MG24487

—

MG24488

—

MG24510

MG17427

MG24511

MG17428

MG24526

MG17457

MG24527

MG17458

MG24542

MG17472

MG24543

MG17473

MG24558

—

MG24559

—

40 A

50 A

60 A

63 A

MG24122

MG24123

MG17409

MG24124

MG24137

MG24138

MG17439

MG24139

MG24152

MG24153

MG17464

MG24154

MG24167

MG24168

—

MG24169

MG24438

MG24439

MG17419

MG24440

MG24455

MG24456

MG17449

MG24457

MG24472

MG24473

MG17469

MG24474

MG24489

MG24490

—

MG24491

MG24512

MG24513

MG17429

MG24514

MG24528

MG24529

MG17459

MG24530

MG24544

MG24545

MG17474

MG24546

MG24560

MG24561

—

MG24562

™

Multi 9™ System Catalog

Section 3—IEC 60947-2 Rated Protection Devices

The Multi 9 system includes several families of miniature circuit protection devices that have the IEC

ratings that are applicable in many countries other than the United States. These products are

summarized below and discussed in more detail in the following pages. UL Listed and UL Recognized

protection devices are described in Section 2, while accessories for both UL Listed and IEC Certified

products are described in Section 5.

Table 13: Specifications for IEC Rated Miniature Circuit Breakers

Ratings per IEC 60947-2 N40 C60N C60H C60L C120H

Number of Poles 1 (Ø + N) 1 2, 3, 4 1 2, 3, 4 1 2, 3, 4 1 2, 3, 4

Rated Current 25°C (77°F) In1–40 A 1–63 A 1–63 A 1–40 A 1–40 A 1–25 A 1–25 A — —

Rated Current (A) 40°C (104°F) In— — — — — — 63–125 63–125

Rated Voltage Ue230 V 440 V 440 V 440 V 440 V 440 V 440 V 440 V 440 V

Ultimate Breaking Capacity (Icu)

as per IEC 60947-2 Standard

130 Vac

230–240 Vac

400–415 Vac

440 Vac

—

7.5 kA

21 kA

—

10 kA

31 kA

—

20 kA

10 kA

6 kA

30 kA

15 kA

41 kA

—

30 kA

15 kA

10 kA

—

25 kA

61 kA

—

50 kA

25 kA

20 kA

30 kA

15 kA

41 kA

—

30 kA

15 kA

10 kA

1P 60 Vdc

2P 125 Vdc

—

15 kA

—

2P 20 kA

3P 30 kA

20 kA

—

2P 25 kA

3P 40 kA

25 kA

—

2P 30 kA

3P 50 kA

—

3P 250 Vdc — — 4P 40 kA — 4P 50 kA — 4P 60 kA — —

Service Breaking Capacity Ics (%Icu) 50% 75% 75% 50% 50% 50% — 75% 75%

Magnetic Trip Curves

B Curve

C Curve

D Curve

K Curve

MA Curve

Z Curve

3–5

7–10

—

7–10

10–14

—

7–10

10–14

—

7–10

10–14

2.4–3.6

3.2–4.8

7–10

10–14

—

1Single pole breaking capacity for IT type European grounding system (insulated neutral-double fault).

Table 14: Dimensions and Weights

Device Size Height Width Depth Weight

in. mm in. mm in. mm oz. g

N40 1P 3.19 81 0.71 18 3.00 76 4.23 120

C60N

3.19

0.71

1.42

2.13

2.48

3.00

3.88

7.75

11.64

15.52

110

220

330

440

C60H

3.19

0.71

1.42

2.13

2.48

3.00

4.23

8.47

12.70

16.93

120

240

360

480

C60L

3.19

0.71

1.42

2.13

2.48

3.00

4.23

8.47

12.70

16.93

120

240

360

480

C120H

3.19

0.71

2.13

3.19

4.25

108

3.00

6.35

12.70

19.05

25.40

180

360

540

720

™

Multi 9™ System Catalog

Section 3—IEC 60947-2 Rated Protection Devices

11/2014

N40 Phase + Neutral Circuit Breakers

The N40 Phase + Neutral Current Circuit Breaker provides phase and neutral protection against short-

circuits and overloads. It provides protection on the phase pole, but switches both the phase and

neutral. The N40 is available in only one version—1 phase + neutral. The N40 circuit breaker is

available with C trip curve characteristics and with ratings from 1 to 40 A.

Time/Current Curves

C curve—Provides control and protection against circuit overcurrents in tertiary and industrial final

distribution with TT or TNS grounding systems. Magnetic trip units operate between 5 and 10 times

ampere rating.

Accessories

These devices may be used in conjunction with the C60 electrical accessories, including the SD alarm

switch, OF auxiliary switch, MN undervoltage release, and/or the MX + OF shunt trip and auxiliary switch.

Standards

•

IEC 60947-2

•

IEC 60898

Figure 8:

086031 51

Table 15: Specifications for N40 Phase + Neutral Circuit Breakers

Package size: Two 0.35 in. (9 mm) Modules 0.71 in. (18 mm) Width

Connection: 8 AWG (10 mm2) Stranded Cables

6 AWG (16 mm2) Solid cable (Copper Only)

Mounting: 35 mm DIN rail Mounting: 35 mm DIN Rail

Degree of Protection Case IP40 as per IEC 529

Terminals IP20

Temperature

Calibration 86°F (30°C)

Storage 40 to 176°F (-40 to 80°C)

Operating 22 to 158°F (-30 to 70°C)

Tropicalization Treatment 2 Relative Humidity: 95% at 131°F (55°C) as per IEC 68-2-30

Number of Operating Cycles

Mechanical 20,000 (O-C)

Electrical

20,000 at 1–20 A

15,000 at 25 A

10,000 at 32 A

6,000 at 40 A

See selection table for dimensions, weights and interrupting ratings.

™

Multi 9™ System Catalog

Section 3—IEC 60947-2 Rated Protection Devices

Catalog Numbers

Catalog Numbers for N40 Phase + Neutral Circuit Breakers

Type 1P+N 3P + N

Rating (In) C Curve C Curve

1 A M9P22601 —

2 A M9P22602 —

3 A M9P22603 —

4 A M9P22604 —

6 A M9P22606 M9P22706

10 A M9P22610 M9P22710

16 A M9P22616 M9P22716

20 A M9P22620 M9P22720

25 A M9P22625 M9P22725

32 A M9P22632 M9P22732

40 A M9P22640 M9P22740

Width in 9-mm modules 2 6

™

Multi 9™ System Catalog

Section 3—IEC 60947-2 Rated Protection Devices

11/2014

IEC Rated C60 Miniature Circuit Breakers

The C60 family of Multi 9 circuit breakers meeting IEC 60947-2 is available primarily for equipment for

export from the United States to countries requiring IEC Certification rather than UL Listing.

Three types of IEC Rated C60 devices are available: C60N, C60H, and C60L circuit breakers. These

model numbers refer to the maximum current interrupting (Ultimate Breaking Capacity) ratings.

Each of these devices is available with several characteristic trip curve ratings, as listed in the tables

with catalog numbers. They include devices ranging from 1 to 63 A. (For higher current ratings, select

devices from the higher current C120 series.)

Standard Features

•

Fast closing: Allows increased withstand to the high inrush currents of some loads

•

Trip-free mechanism: Contacts cannot be held in the I-ON position when the C60 device is tripped

automatically.

•

Positive indication of contact disconnect. Green mechanical indication on front face of device

shows that all poles are open.

•

Suitable for reverse feeding.

•

C curve: Overcurrent protection for all application types:

— C60N/H: The magnetic release operates between 5 and 10 times ampere rating.

— C60L: The magnetic release operates between 7 and 10 times ampere rating.

•

D curve: Overcurrent protection for loads with high inrush currents (motors, transformers):

— C60N/H/L: The magnetic release operates between 10 and 14 times ampere rating.

Table 16: Specifications for IEC Rated C60 Miniature Circuit Breakers

High Voltage Withstand 6 kV

Connections (Box Lug) for

C60N/H/L Except C60L-MA1

1Ring tongue terminal is optional.

1–25 A, 18–4 AWG (1–25 mm2) Cu Only Cables Torque to 22 lb-in (2.5 N•m)

30–63 A, 18–2 AWG (1–35 mm2) Cu Only Cables Torque to 31 lb-in (3.5 N•m)

Connections for C60L-MA:

1.5–10 A Stranded 6 AWG (16 mm2) Torque to 35 lb-in (4 N•m)

1.5–10 A Solid 4 AWG (25 mm2) Torque to 18 lb-in (2 N•m)

12.5–40 A Stranded 4 AWG (25 mm2) Torque to 35 lb-in (4 N•m)

12.5–40 A Solid 2 AWG (35 mm2) Torque to 31 lb-in (3.5 N•m)

Mounting 35 mm DIN rail

Time-Current Curves B, C, D, K, and MA

Degree of Protection Case IP40 as per IEC 529

Terminals IP20

Temperature:

Calibration temperature: 30°C (86°F) C60L calibrated at 40°C (104°F)

Storage temperature -40 to 80°C (-40 to 176°F)

Operating temperature -30 to 70°C (-22 to 158°F)

Tropicalization Treatment 2 Relative Humidity: 95% at 131°F (55°C) per

IEC 68-2-30

Number of Operating Cycles Mechanical (O-C) 20,000

Electrical (O-C) 10,000

See selection table for dimensions, weights and interrupting ratings.

™

Multi 9™ System Catalog

Section 3—IEC 60947-2 Rated Protection Devices

Catalog Numbers

C60N Circuit Breaker

Type 1P 2P 3P 4P

Rating (In) C Curve D Curve C Curve D Curve C Curve D Curve C Curve D Curve

1 A M9F11101 M9F12101 M9F11201 M9F12201 M9F11301 M9F12301 M9F11401 M9F12401

2 A M9F11102 M9F12102 M9F11202 M9F12202 M9F11302 M9F12302 M9F11402 M9F12402

3 A M9F11103 M9F12103 M9F11203 M9F12203 M9F11303 M9F12303 M9F11403 M9F12403

4 A M9F11104 M9F12104 M9F11204 M9F12204 M9F11304 M9F12304 M9F11404 M9F12404

6 A M9F11106 M9F12106 M9F11206 M9F12206 M9F11306 M9F12306 M9F11406 M9F12406

10 A M9F11110 M9F12110 M9F11210 M9F12210 M9F11310 M9F12310 M9F11410 M9F12410

16 A M9F11116 M9F12116 M9F11216 M9F12216 M9F11316 M9F12316 M9F11416 M9F12416

20 A M9F11120 M9F12120 M9F11220 M9F12220 M9F11320 M9F12320 M9F11420 M9F12420

25 A M9F11125 M9F12125 M9F11225 M9F12225 M9F11325 M9F12325 M9F11425 M9F12425

32 A M9F11132 M9F12132 M9F11232 M9F12232 M9F11332 M9F12332 M9F11432 M9F12432

40 A M9F11140 M9F12140 M9F11240 M9F12240 M9F11340 M9F12340 M9F11440 M9F12440

50 A M9F11150 —M9F11250 —M9F11350 —M9F11450 —

63 A M9F11163 —M9F11263 —M9F11363 —M9F11463 —

Width in 9-mm modules 2 4 6 8

531

7531

C60H Circuit Breaker

Type 1P 2P 3P 4P

Rating (In) C Curve D Curve C Curve D Curve C Curve D Curve C Curve D Curve

1 A M9F14101 M9F15101 M9F14201 M9F915201 M9F14301 M9F15301 M9F14401 M9F15401

2 A M9F14102 M9F15102 M9F14202 M9F15202 M9F14302 M9F15302 M9F14402 M9F15402

3 A M9F14103 M9F15103 M9F14203 M9F15203 M9F14303 M9F15303 M9F14403 M9F15403

4 A M9F14104 M9F15104 M9F14204 M9F15204 M9F14304 M9F15304 M9F14404 M9F15404

6 A M9F14106 M9F15106 M9F14206 M9F15206 M9F14306 M9F15306 M9F14406 M9F15406

10 A M9F14110 M9F15110 M9F14210 M9F15210 M9F14310 M9F15310 M9F14410 M9F15410

16 A M9F14116 M9F15116 M9F14216 M9F15216 M9F14316 M9F15316 M9F14416 M9F15416

20 A M9F14120 M9F15120 M9F14220 M9F15220 M9F14320 M9F15320 M9F14420 M9F15420

25 A M9F14125 M9F15125 M9F14225 M9F15225 M9F14325 M9F15325 M9F14425 M9F15425

32 A M9F14132 M9F15132 M9F14232 M9F15232 M9F14332 M9F15332 M9F14432 M9F15432

40 A M9F14140 M9F15140 M9F14240 M9F15240 M9F14340 M9F15340 M9F14440 M9F15440

Width in 9-mm modules 2 4 6 8

531

7531

™

Multi 9™ System Catalog

Section 3—IEC 60947-2 Rated Protection Devices

11/2014

Catalog Numbers

C60L Circuit Breaker

Type 1P 2P 3P 4P

Rating (In) C Curve

1 A M9F17101 M9F17201 M9F17301 M9F17401

2 A M9F17102 M9F17202 M9F17302 M9F17402

3 A M9F17103 M9F17203 M9F17303 M9F17403

4 A M9F17104 M9F17204 M9F17304 M9F17404

6 A M9F17106 M9F17206 M9F17306 M9F17406

10 A M9F17110 M9F17210 M9F17310 M9F17410

16 A M9F17116 M9F17216 M9F17316 M9F17416

20 A M9F17120 M9F17220 M9F17320 M9F17420

25 A M9F17125 M9F17225 M9F17325 M9F17425

Width in 9-mm modules 2 4 4 6

531

7531

™

Multi 9™ System Catalog

Section 3—IEC 60947-2 Rated Protection Devices

IEC Rated C120H Circuit Breakers

The IEC Rated C120H family of Multi 9 circuit breakers meets the requirements of IEC 947-2 and are

available for OEMs wishing to export manufactured products to countries requiring IEC Certification

instead of UL Listing.

They are suitable for protection of cables against overloads and short circuits in equipment. They can

also be used for manual control and isolation of circuits.

The C120H circuit breakers are available in B, C, and D trip curves, as listed in Table 19. They include

devices ranging from 63 to 125 A. (For lower current ratings, select devices from the C60 series.)

Standard Features

•

Fast closing: Allows increased withstand to the high inrush currents of some loads.

•

Trip-free mechanism: Contacts cannot be held in I-ON position when C120 is tripped automatically.

•

Isolation with positive break indication: Green strip on operating handle indicates all poles are open

•

Terminals ensure pull-out withstand of cables, guiding of cables into correct position, and

tightening of wide cross-section cables.

•

B curve: Overcurrent protection of very long cables and protection of networks supplied by

generators. The magnetic release operates between 3 and 5 times ampere rating.

•

C curve: Overcurrent protection for all application types. The magnetic release operates between 5

and 10 times ampere rating.

•

D curve: Overcurrent protection for loads with high inrush currents (motors, transformers). The

magnetic release operates between 10 and 14 times ampere rating.

•

Suitable for reverse feeding.

Table 17: IEC 947-2 Rated C120H Circuit Breakers

2P 3P 4P

Table 18: Specifications for IEC Rated C120H Circuit Breakers

Package Size Three 9 mm Modules 27 mm Width per Pole

Voltage High Voltage Withstand 6 kV

Maximum Voltage Rating 440 Vac

Connection: Box Lug, 10–100 A 18 to 1 AWG (1–50 mm2) Cables Cu Wire Only

Mounting 35 mm DIN Rail

Degree of Protection: Case IP40 as per IEC 60529

Terminals IP20

Time/Current Curves B, C and D Curves

Temperature:

Calibration 30°C (85°F)

Storage -40 to 80°C (-40 to 176°F)

Operating -30 to 70°C (-22 to 158°F)

Tropicalization Treatment 2 Relative Humidity: 95% at 55°C (131°F) as per IEC 68-2-30

Number of Operating Cycles 1000 (O-C) at 63 A

5000 (O-C) at 80–125 A

™

Multi 9™ System Catalog

Section 3—IEC 60947-2 Rated Protection Devices

11/2014

Accessories

Ground-fault protection can be provided when combined with a Vigi C120 module. Remote tripping

and indication can be provided by adding a variety of auxiliaries (see section 5 for accessories).

NOTE: The C120 circuit breakers use the same electrical auxiliaries as the C60 circuit breakers. They

do not accept the NC100H circuit breaker accessories.

Standards

•

IEC 60947-2

•

VDE 0660

•

CE Marked

Catalog Numbers

Table 19: Catalog Numbers for Multi 9 C120H (10–125 A) Circuit Breakers—15 kA at 240 Vac

Rating 1P 2P 3P 4P

B Curve (Magnetic Setting Between 3 and 5 Times Ampere Rating)

63 A A9N18401 A9N18412 A9N18423 A9N18434

80 A A9N18402 A9N18413 A9N18424 A9N18435

100 A A9N18403 A9N18414 A9N18425 A9N18436

125 A A9N18404 A9N18415 A9N18426 A9N18437

C Curve (Magnetic Setting Between 5 and 10 Times Ampere Rating)

63 A A9N18445 A9N18456 A9N18467 A9N18478

80 A A9N18446 A9N18457 A9N18468 A9N18479

100 A A9N18447 A9N18458 A9N18469 A9N18480

125 A A9N18448 A9N18459 A9N18470 A9N18481

D Curve (Magnetic Setting Between 10 and 14 Times Ampere Rating)

63 A A9N18489 A9N18500 A9N18511 A9N18522

80 A A9N18490 A9N18501 A9N18512 A9N18523

100 A A9N18491 A9N18502 A9N18513 A9N18524

125 A A9N18492 A9N18503 A9N18514 A9N18525

™

Multi 9™ System Catalog

Section 4—Ground-Fault Protection Devices

Selection Table

The Multi 9 System includes one UL Listed and three IEC rated product families that provide ground-fault

protection. These products are summarized below and discussed in more detail in the following pages.

Table 20: Selection Table for Multi 9 Ground-fault Protection Products

GFP ID C60 Vigi

Standard UL 1053

IEC 61008 IEC 61008 IEC 61009

Number of Poles 2P 2P 4P 2P 4P 2P 2P 3P 4P

Rated Current (A)

25°C (77°F) — — — 25–100 25–100 < 63 < 63 < 63 < 63

Sensitivities

Instantaneous

10 mA

30 mA

100 mA

300 mA

500 mA

—

25–63

25–100

—

25–63

25–100

—

25–63

25–100

—

Yes

—

Yes

—

Yes

—

Yes

—

Yes

—

Yes

—

Yes

—

Yes

—

Selective

300 1

500 1

1000 1

1 Selective = has non-adjustable time delay to allow selective coordination.

—

Yes

—

Yes

—

Yes

—

Yes

—

Yes

—

Yes

Voltage (Nominal)

Vac, 50-60 Hz 120, 240 277, 480Y 240,

480Y/277 240/415 130 240/415

Time/Current Curve Depends on Circuit Breaker Used.

Dimensions (in./mm)

Width

Height

Depth

1.42

(36)

3.19

(81)

3.00

(76)

1.42

(36)

3.19

(81)

3.00

(76)

2.84

(72)

3.19

(81)

3.00

(76)

1.42

(36)

3.19

(81)

3.00

(76)

2.84

(72)

3.19

(81)

3.00

(76)

1.42

(36)

3.19

(81)

3.00

(76)

1.42

(36)

3.19

(81)

3.00

(76)

2.13

(54)

3.19

(81)

3.00

(76)

12.84

(72)

3.19

(81)

3.00

(76)

Weight (oz./g) 7.70/

220

7.70/

220

15.9/

450

7.70/

220

15.9/

450

2.43/

120

5.29/

150

< 25 = 6.35 /180

> 63 = 7.41/210

Pickup

Table 21: Overcurrent Protection Required for UL Applications of GFP

GFP

C60 Circuit Breaker

25 A, 240 Vac 20 A, 277 Vac 20 A, 480Y/277 Vac

1P and 2P 3 P 1P 2P 3P

2P 240 Vac 10 — — — —

2P 480Y/277 Vac — — 10 10 —

4P 480Y/277 Vac — 10 — — 10

™

Multi 9™ System Catalog

Section 4—Ground-Fault Protection Devices

11/2014

UL 1053 Listed GFP Ground Fault Protectors

The GFP Ground Fault Protector provides ground fault protection for electrical circuits. It will

automatically open the circuit in the case of a ground fault between phase and ground greater than 10,

30 or 300 mA, depending on the model. An electromechanical release operates without any auxiliary

source of supply to open the circuit. The GFP is available in 2-pole and 4-pole (3 or 4-wire) versions.

NOTE: The GFP has only one protective function—detection of ground fault current. There is no

thermal or magnetic overcurrent protection. Therefore, the circuit must be protected upstream by an

approved device such as the Multi 9 C60, QOU, QO, or HGL circuit breaker, or a fuse.

Multi 9 GFP products contain Si technology to increase immunity to noise and to minimize the potential

for nuisance tripping in noisy electrical environments.

The toggle on the front of the GFP is used to reset the device after it has tripped. It should not be used

to switch loads. A test button located on the front of the GFP is provided to allow periodic testing of the

device. The tripped condition due to ground fault is displayed on the front face by a red mechanical

indicator.

Remote monitoring and control can be provided with optional C60 accessories including the OF

Auxiliary Switch, SD Alarm Switch, MN Undervoltage Release and/or MX + OF Shunt Trip.

NOTE: These auxiliaries require the use of the OFS Auxiliary Switch (Cat. No. 26923) to adapt to the

ID Residual Current Switch.

Standards

•

UL 1053 (not CSA certified)

•

IEC 61008

•

CE Marked

Table 22: Specifications for UL 1053 Listed GFP Ground Fault Protectors

Voltage Rating

Two Poles at 120 or 240 Vac (-15/+10%)

Two Poles at 277 or 480Y/277 Vac (-15/+10%)

Four Poles at 240 Vac or 480Y/277 Vac (-15/+10%)

Current Rating (40°C) 25 A, 40 A, 63 A, 80 A or 100 A Depending on catalog number

Ground Fault Sensitivity:

GFP30 Must trip at 29.9 mA; must not trip below 22.1 mA

GFP100 Must trip at 98.9 mA; must not trip below 73.1 mA

GFP300 Must trip at 299 mA; must not trip below 221 mA

Short-Circuit Current Rating 10 kA with recommended circuit breaker or

fuse upstream See bulletin GHA1080850AB

Frequency 50 or 60 Hz

Mounting 35 mm DIN rail

Connection, Box Lug Wire: 75°C copper wire only, stranded or solid

14 to 2 AWG (2.5 to 35 mm2)Torque to 31 lb-in (3.5 N•m)

Padlocking in the “Tripped”

Position is Possible Use a padlocking device Requires addition of OFS on left side of circuit

breaker plus padlocking attachment M9PAFL

Ground-Fault Indication Red indicator flag on front face

Temperature Operating temperature -25 to +60°C (-13 to +140°F)

Storage temperature -40 to +70°C (-40 to + 158°F)

Tropicalization Treatment 2 Relative humidity 95% at 55°C (131°F)

See Table 20 on page 32 for dimensions and weights.

™

Multi 9™ System Catalog

Section 4—Ground-Fault Protection Devices

Catalog Numbers

Table 23: Catalog Numbers for UL Rated GFP Ground Fault Protectors

Poles Voltage Current Maximum

Sensitivity Tripping Range Family Catalog

Number

UL 1053

120/240 V, 240 V

60 Hz

IEC 61008

230 V, 240 V

50 Hz

25 A

30 mA

100 mA

300 mA

22.1 to 29.9 mA

73.1 to 98.9 mA

221 to 299 mA

GFP 30

GFP 100

GFP 300

60949

60950

60951

40 A 30 mA

300 mA

22.1 to 29.9 mA

221 to 299 mA

GFP 30

GFP 300

60952

60954

63 A 30 mA 22.1 to 29.9 mA GFP 30 60955

UL 1053

277 V, 480Y/277 V

60 Hz

IEC 61008

230/400 V, 240/415 V

50 Hz

25 A 30 mA

300 mA

22.1 to 29.9 mA

221 to 299 mA

GFP 30

GFP 300

60969

60971

40 A 30 mA 22.1 to 29.9 mA GFP 30 60972

UL 1053

240 V, 480Y/277 V

60 Hz

IEC 61008

230/400 V, 240/415 V

50 Hz

25 A

30 mA

100 mA

300 mA

22.1 to 29.9 mA

73.1 to 98.9 mA

221 to 299 mA

GFP 30

GFP 100

GFP 300

60989

60990

60991

40 A 30 mA

300 mA

22.1 to 29.9 mA

221 to 299 mA

GFP 30

GFP 300

60992

60994

63 A 30 mA

100 mA

22.1 to 29.9 mA

73.1 to 98.9 mA

GFP 30

GFP 100

60995

60996

100 A 300 mA 221 to 299 mA GFP 300 60999

Figure 9: Possible Device Combinations

+++

GFP

Ground Fault Protector

OFS Auxiliary Switch

Required in order

to mount either/both

indicated accessories.

MX Shunt Trip

and/or

MN Undervoltage

Release

OF Auxiliary Switch

and/or

SD Alarm Switch

™

Multi 9™ System Catalog

Section 4—Ground-Fault Protection Devices

11/2014

IEC Rated ID Residual Current Switches

The ID Residual Current Switches provide ground fault protection for electrical circuits, as well as the

functions of isolation and switching. ID switches have an electromechanical release that opens a circuit

automatically in the case of a fault between phase and earth greater than 10, 30, or 300 mA,

depending on the model. The switch operates without the need for an auxiliary source of power. A

version with time delay (selective) provides non-adjustable time delay for coordination with

downstream instantaneous residual current devices. The ID Switch is available in 2-pole (1-phase) and

4-pole (3-phase) versions.

The ground fault is displayed on the front face by a red mechanical indicator.

NOTE: The ID residual current switch has only one protective function—detection of earth leakage

current. There is no thermal or magnetic overcurrent protection. Therefore, the circuit must be

protected by an upstream circuit breaker or supplementary protector. For combined overcurrent and

residual current protection, an alternative is a C60 circuit breaker equipped with an auxiliary Vigi

ground-fault detector module.

The ID device can also be manually operated as a switch. Remote monitoring and control can be

provided with optional C60 accessories including the OF Auxiliary Switch, SD Alarm Switch, MN

Undervoltage Release, and/or MX + OF Shunt Trip.

NOTE: All of these auxiliaries require the use of the OFS Auxiliary Switch (Cat. No. 26923) to adapt to

the ID Residual Current Switch.

A test button provided on the front of the ID Residual Current Switch to allow periodic testing of the

device.

Figure 10: IEC Rated ID Residual Current Switches

Table 24: Specifications for IEC Rated ID Residual Current Switches

Voltage Nominal voltage 240 to 415 Vac, +10%, -20%, 50/60 Hz

High voltage withstand 6 kV

Connection, Box Lug

14–2 AWG (2.5–35 mm2) stranded cables,

Cu wire only Torque to 31 lb-in (3.5 N•m)

1 AWG (50 mm2) solid cables, Cu wire only Torque to 31 lb-in (3.5 N•m)

Sensitivities Fixed at 10, 30, or 300 mA

Time/Current Curve Instantaneous or selective release S (Time Delay)

Level of Immunity 250 A Peak According to 8/20 ms periodical wave

Operating Temperature -5 to 60°C (22 to 140°F)

Tropicalisation Treatment 2 Relative humidity: 95% at 55°C (131°F) per IEC 68-2-30

Mounting 35 mm DIN Rail

Number of Operating Cycles Electrical (O-C) 20,000

See Table 20 for weights, dimensions and interrupting ratings.

™

Multi 9™ System Catalog

Section 4—Ground-Fault Protection Devices

Standards

•

IEC 61008

•

CE Marked

Catalog Numbers

Table 25: Catalog Numbers for IEC ID Residual Current Switches—AC Class

Rating Sensitivity

(mA)

2P (240 Vac)

4 Modules

4P (415 Vac)

8 Modules

25 A 30 M9R11225 —

40 A 30

300

M9R11240

M9R14240

M9R11440

M9R14440

Figure 11: Possible Device Combinations

+++

OFS Auxiliary Switch

Required in order

to mount either/both

indicated accessories.

MX Shunt Trip

and/or

MN Undervoltage

Release

OF Auxiliary Switch

and/or

SD Alarm Switch

ID Residual Current

Switch

™

Multi 9™ System Catalog

Section 4—Ground-Fault Protection Devices

11/2014

IEC Rated C60 Vigi

Modules for Ground-fault Protection

The C60 Vigi residual current detector can be added to the C60 circuit breaker to provide a high level

of protection against earth leakage faults. The Vigi module clips onto the right-hand side of a C60

protective device and is mechanically linked to the C60 circuit breaker, which it trips when the Vigi

detects residual current. Vigi modules are available for use with 2-, 3-, and 4-pole C60 circuit breakers.

The Vigi module may be field installed.

The Vigi module combines a current sensing toroid and residual current relay in one case and

operates without an auxiliary power supply source. It may be ordered with a variety of non-adjustable

sensitivities (10 to 1,000 mA). A version with time delay (selective) provides non-adjustable time delay

for coordination with downstream instantaneous residual current devices.

A built-in filtering device minimizes nuisance tripping due to transient voltages (lightning, line

disturbances, etc.) and transient currents (from high capacitive circuits).

A visual indicator of the ground fault is provided by a red flag on the Vigi operating handle. A manual

test button on the face of the Vigi module allows manual testing of the Vigi module.

The C60 Vigi module can be field-adapted to reset in one of two modes: Automatic reset when the

associated protective device handle is reset, or by manually resetting the Vigi prior to reclosing the

supplementary protector.

A version with time delay (selective) provides additional time discrimination with downstream

instantaneous residual current devices.

NOTE: The C60 version of the Vigi Module cannot be used with the C120 series. A different series of

Vigi Modules is available for the C120 devices.

NOTE: Also see the ID Residual Current Switches.

Figure 12:

Vigi Module

Figure 13: Example of Residual Current Circuit Breaker

Table 26: Specifications for IEC Rated C60 Vigi Modules for Ground-Fault Protection

Voltage (Nominal): 130–240 Vac +10/ -20%, 50/60 Hz

220–415 Vac +10/ -20%, 50/60 Hz

High Voltage Withstand: 6 kV 6 kV

Connection: Box Lug:

≤ 25 Stranded 6 AWG (16 mm2) Cu Wire 4 N•m

≤ 25 Solid 6 AWG (16 mm2) Cu Wire 2 N•m

≤ 63 Stranded 6 AWG (16 mm2) Cu Wire 4 N•m

≤ 63 Solid 6 AWG (16 mm2) Cu Wire 3.5 N•m

Mounting 35 mm DIN rail

Time-Current Curves Depends on Circuit Breaker

Time/Current Curve Instantaneous or Selective Release

Sensitivities Fixed at 10, 30, 300, or 1000 mA

Temperatures Calibration 77°F (25°C)

Operating 22 to 140°F (-5 to 60°C)

See Table 20 on page 32 for weights, dimensions and interrupting ratings.

Vigi ModuleC60 Circuit Breaker Residual Current Circuit Breaker

™

Multi 9™ System Catalog

Section 4—Ground-Fault Protection Devices

Accessories

Terminal screw shields prevent contact with the Vigi module terminal screws. The bag includes twenty

pieces of single-pole shields (Cat. No. 26982).

Standards

Combined with C60, the Vigi module forms a residual current device which conforms to the following

standards:

•

IEC 61009

•

EN 61009

Catalog Numbers

Table 27: Catalog Numbers for Vigi C60 Modules—AC Class (Not UL/CSA Recognized)

Rating Voltage

Sensitivity

(mA) 2P 2P 3P 4P

≤ 63 A 220–415 Vac 30

300 1

Selective = has non-adjustable time delay to allow selective coordination.

—

M9V11263

M9V14263

M9V11363

M9V14363

M9V11463

M9V14463

Figure 14: IEC Rated C60 Vigi Modules

™

Multi 9™ System Catalog

Section 4—Ground-Fault Protection Devices

11/2014

IEC Rated C120 Vigi Residual Current Circuit Breakers

The C120 Vigi residual current detector can be added to the C120 circuit breaker to provide a high

level of protection against earth leakage faults. The Vigi module clips onto the right-hand side of a

C120 protective device and is mechanically linked to the C120 circuit breaker, which it trips when the

Vigi detects residual current.

The C120 circuit breaker and Vigi module combination is reset in a single operation by resetting the

circuit breaker.

The Vigi module combines a current sensing toroid and residual current relay in one case and

operates without an auxiliary power supply source. It may be ordered with a variety of non-adjustable

sensitivities (30 to 1,000 mA). A version with time delay (selective) provides additional time

discrimination with downstream instantaneous residual current devices.

Vigi modules combine with the C120 2-, 3- and 4-pole circuit breakers to provide:

•

Protection of people against indirect contact (per IEC Standards)

•

Additional protection of people against direct contact (30 mA)

•

Protection of electrical installations against insulation faults

The C120 circuit breaker and Vigi module combination is protected against nuisance tripping due to

transient overvoltages such as lightning, switching on the network, etc.

Standards

Complies with IEC 1009 Standard

Catalog Numbers

Figure 15:

2P C120 Vigi

Module

Table 28: Specifications for IEC Rated C120 Vigi Residual Current Circuit Breakers

Current Rating 125 A

Guarantees Tripping for Sinusoidal

AC Residual Currents Either suddenly applied or slowly increasing

Total Vertical Discrimination with

the IΔn 300 mA to 1 A

“Selective” Sensitivities if it is

Installed:

Upstream from an instantaneous residual

current device

Downstream from an Index II, Time-Delayed

Residual Current Device

Where in both cases the IΔn of the downstream

device ≤ IΔn/2 of the upstream device

Connections 16–2 AWG (1–35 mm2) stranded wire 31 lb-in (3.5 N•m)

16–1 AWG (1–50 mm2) solid wire 31 lb-in (3.5 N•m)

Voltage 220–415 Vac +10%, -20%, 50/60 Hz

Mechanical Indication Red indicator On front face of the Vigi module

Instantaneous or Selective Tripping Fixed sensitivities for all ratings

See Table 20 on page 32 for weights and interrupting ratings.

Table 29: Catalog Numbers for IEC C120 Vigi Si (Noise Immune) Module—AC Class

Rating Voltage Sensitivity (mA) 2P 3P 4P

125 A 220–415 Vac

30 A9N18591 A9N18594 A9N18597

300 A9N18592 A9N18595 A9N18598

300 1

Selective = has non-adjustable time delay to allow selective coordination.

A9N18556 A9N18558 A9N18560

500 ——A9N18599

1000 A9N18557 A9N18559 A9N18561

™

Multi 9™ System Catalog

Section 4—Ground-Fault Protection Devices

N40 Vigi Residual Current Circuit Breaker

Function

•

The DPN N Vigi residual current device provides complete protection of final circuits (overcurrents

and insulation faults):

— protection of people against electric shocks by direct contacts (30 mA),

— protection of people against electric shocks by indirect contacts (300 mA),

— protection of installations from fire hazards (300 mA).

•

Fast closing.

•

Positive break indication.

•

Display of earth fault on the front panel by position of toggle.

•

The "si" range has been designed to maintain a network with optimum safety and continuity of

service in installations disturbed by:

— extreme atmospheric conditions,

— harmonic generating loads,

— transient operating currents.

Catalog Numbers

Standards

•

European standard EN 61009.

•

International standard IEC 61009.

Figure 16: IEC Rated C120 Vigi

Modules

Table 30: N40 VIGI Residual Current Circuit Breaker

Rating (A) 1-pole + N (C Curve) 4 Modules Width in

9-mm

Modules

30 mA 300 mA

M9D11610

M9D11616

M9D11620

M9D11625

M9D11640

M9D14610

M9D14616

M9D14620

M9D14625

M9D14640

Voltage Rating (Ue) 230 Vac

Operating Frequency 50/60 Hz

08603161

1 3

➞

2-pole C120 Vigi Module

08603180

1 3 5

246

➞

3-pole C120 Vigi Module

08603181

246

1 3 5 7

➞

4-pole C120 Vigi Module

™

Multi 9™ System Catalog

Section 5—Accessories

11/2014

Section 5—Accessories

The Multi 9 System includes an extensive line of field-installable accessories that enables the system

to be used in many applications. Electrical auxiliaries include shunt trip, undervoltage release, auxiliary

switch, and alarm switch. Control and display devices include push buttons, motor operators, and

signal lamps. Also available is a variety of accessories for locking, operating, shielding, mounting, etc.

Other devices include switches and timers. The following diagram shows many of the accessories.

All of the accessories described in this section may be field-installed. These include electrical

auxiliaries, comb bus bars, mounting devices, shielding and identification systems, operators, and

display, status, and control devices.

Figure 17: Overview of Multi 9 System Accessories

111111111111111111

DDDDDDDDDDDDDDDDDD

O-OFF

11 12 13

O-OFF

14 15

210

3456

16 17 18

1. DC Circuit Breaker (UL 489A)

2. C60 UL 1077 Recogniz ed Supplementary Protectors or

UL 489 Listed Circuit Breakers

3. Undervoltage Release (MN)

4. Shunt Trip (MX + OF)

5. Auxiliary Switch (OF)

6. Alarm Switch (SD)

7. Comb Bus Bar

8. Connector

9. Ring Tongue Terminal Kit

10. C60N/NC100 Vigi Module

11. Terminal Cover

12. Interphase Barrier

13. Terminal Screw Shield

14. Padlock Attachment

(Off Position)

15. Plug-in Base

16 Rotary Handle

17. Spacer

18.

19. Left Side Padlock Attachment

20. Right Side Padlock Attachment

Identification System

08603523

oror

or or or

15 mm

PZ2

5.5 mm

Rating Tightening Torque Copper Cables

Rigid Flexible or with End-Piece

4–40 A 3.5 N•m 1–16 mm21–10 mm2

™

Multi 9™ System Catalog

Section 5—Accessories

Electrical Auxiliaries

The Multi 9 product line includes a variety of electrical auxiliaries for the C60, N40, and C120

supplementary protectors and circuit breakers. They may be attached to the protective device as

needed to fulfill the tripping or monitoring application requirements. They include the following devices:

•

MN Undervoltage Release

•

MX + OF Shunt Trip and Auxiliary Switch

•

OF Auxiliary Switch

•

SD Alarm Switch

•

OFS Special Auxiliary Switch (For use with GFP and ID RCCB’s, allows other accessories to be

mounted to the side of the GFP.)

The Multi 9 Vigi Module, which adds ground-fault protection, is described in Section 4.

Accessories have a maximum width of 54 mm and are mechanically linked to the base C60, N40 or

C120 protective devices.

Figure 18: Possible Auxiliary Combinations

Table 31: Catalog Numbers for Electrical Auxiliary Devices

Device

Control Voltage Modules

(9mm)

C60 / GFP / N40 C120

Vac Vdc UL/IEC IEC IEC

MX + OF

Shunt Trip + Aux Switch

110-240-277

220-277

125

—

27118

27110

27109

—

27118

27110

27109

—

A9N20948

A9N26947

A9N26946

—

Undervoltage Release

120

240

—

27108

27106

27107

27105

27108

27106

27107

27105

—

A9N26961

—

A9N26960

Auxiliary Switch 12-277 12-125 1 MG26925 26924 26924

Alarm Switch 12-277 12-125 1 MG26928 26927 26927

OFS

Alarm Switch for GFP Only 240/415 130 1 — — 26923

C60 Supplementary

Protector or

Circuit Breaker

L or +

N or –

94 92

Fault

Normal

08603149

L or +

N or –

14 12

Closed

Open

08603148

L or +

N or –

Closed

Open

14 12

08603150

u >

L or +

N or –

08603146

MN Undervoltage

Release

MX + OF Shunt Trip

and Auxiliary Switch

OF Auxiliary SwitchSD Alarm Switch

™

Multi 9™ System Catalog

Section 5—Accessories

11/2014

MN Undervoltage Release

The MN Undervoltage Release provides remote tripping of C60, N40 or C120 devices. It causes the device

to trip whenever the MN detects a drop of its control voltage to the range of 70 to 35% of nominal. The

tripped condition is shown by a red indicator flag on the front panel of the MN undervoltage release. The MN

undervoltage release is mechanically linked to the C60, N40 or C120 device. It may be used in conjunction

with the SD Alarm Switch, OF Auxiliary Switch, and/or the MX + OF Shunt Trip and Auxiliary Switch.

NOTE: The tripped circuit breaker or supplementary protector must be manually reset. The MN

Undervoltage Trip prevents the device from being reclosed until the control voltage has been restored.

Models must be selected depending on the level of control voltage source (ac or dc).

•

Used for emergency stop via push button.

•

Used as safety feature on circuit supplying several machines, to prevent uncontrolled restarting of

motors.

•

UL Recognized for use with UL 1077 Recognized devices and UL Listed for use with UL 489/CSA

C22.2 No.5 Listed devices.

•

CSA and IEC Rated

The linkage is mechanical, thus ensuring the integrity of the protection function. Multiple auxiliaries may

be used in combination with a single C60, N40 or C120 protective device. Terminal pads for connection

of control wiring are provided for either one or two 16–14 AWG (1.5–2.5 mm

) cables.

MN Time-delayed Undervoltage Release

The time-delayed undervoltage release is identical to the standard MN undervoltage release, except

that it allows brief interruptions of control power without opening the circuit breaker due to

undervoltage. It allows a 0.5 second time delay before opening the associated protective device.

MX + OF Shunt Trip and Auxiliary Switch

The MX + OF switch combines the functions of shunt trip and auxiliary switch into one device. The MX

Shunt Trip, when energized by a control voltage, provides remote tripping of the associated C60 or

N40 circuit breakers or supplementary protectors to which it is mechanically linked.

The tripped condition is indicated by a red indicator flag on the front panel of the MX + OF. The

protective device must be manually reset after being tripped by the MX.

NOTE: When the OF function is combined with the MX Shunt Trip, no test button is provided.

The MX + OF Switch may be used in conjunction with the SD Alarm Switch, which presents the trip

status, and/or the MN Undervoltage Release.

•

UL Recognized for use with UL 1077 Recognized devices and UL Listed for use with UL 489/CSA

C22.2 No.5 Listed devices.

•

CSA and IEC Rated.

Table 32: Power Consumption of MX and MN Accessories

Type Voltage VA or W Type Voltage VA or W

MX (inrush)

415 Vac

220–240 Vac

48–130 Vac

110–130 Vdc

48 Vac/Vdc

24 Vac/Vdc

120

200

120

MN (holding)

220–240 Vac

48 Vac

48 Vdc

4.1

4.3

2.0

MN (holding)1

1IEC Rated; not UL/CSA Recognized.

220–240 Vac 4.1

Table 33: Wiring for MX and MN Accessories

Wire Torque

16–14 AWG (0.5–2.5 mm2) solid or stranded wire 9 lb-in. (1 N•m)

™

Multi 9™ System Catalog

Section 5—Accessories

OF Auxiliary Switch

The OF Auxiliary Switch communicates the OPEN or CLOSED status of the associated C60 or N40

circuit breaker or supplementary protector via auxiliary contacts. It is mechanically linked to the

supplementary protector (See the SD Alarm Switch for TRIP status).

It may be used in conjunction with the SD Alarm Switch, which presents the trip status, and the MN

Undervoltage Release. It would not normally be used with the MX + OF Shunt Trip because that device

already includes the OF function.

•

UL Recognized for use with UL 1077 Recognized devices and UL 489/CSA C22.2 No.5 Listed devices.

•

CSA and IEC Rated.

OFS Auxiliary Switch and Adapter (for GFP and ID RCD)

The OFS Auxiliary Switch and Adapter has an auxiliary switch to provide the auxiliary switch function

and an adapter which allows the UL Listed GFP ground fault protector and the IEC Rated ID Residual

Current Switches (in Section 4) to use the same electrical accessories as the C60 and N40

supplementary protectors, including the OF Auxiliary Switch, SD Alarm Switch, MN Undervoltage

Release, and/or MX + OF Shunt Trip. It may be used alone or with accessories.

IEC Rated; not UL/CSA Recognized.

SD Alarm Switch

The SD Alarm Switch communicates the trip status of the associated C60, N40 or C120 circuit

breakers or supplementary protectors via auxiliary contacts. It is mechanically linked to the protective

device. Locally, it also indicates a tripped-on-fault condition of the protective device with a red indicator

flag on the front panel. (Use the OF Auxiliary Switch for open or closed status.)

A test switch allows simulation of the SD function without operating the protective device.

The SD Alarm Switch is reset when the associated protective device is reset, or it may by reset

independently of the protective device with a reset lever on its front panel.

The SD Alarm Switch may show the circuit breaker status, using V Type Signal Lamps, other

annunciators, or a control system. It may be used in conjunction with the OF Auxiliary Switch which

presents the open or closed status, the MN Undervoltage Release, and/or the MX + OF Shunt Trip.

•

UL Recognized for use with UL 1077 Recognized devices and UL Listed for use with UL 489/CSA

C22.2 No.5 Listed devices.

•

CSA and IEC Rated

Table 34: Catalog Number for OFS Auxiliary Switch and Adapter

Description Width in Modules Catalog Number

OFS Auxiliary Switch and Adapter 1 26923

Voltage

Breaking

Capacity

(A)

SD OF

277 Vac

< 240 Vac

130 Vac

< 48 Vdc

< 24 Vdc

Figure 19: Electrical Auxiliary Schematics

U >

MX + OF Shunt Trip OF Auxiliary Switch

U <

MN Undervoltage Release

14 12 C2 C1 D1 D2 14 12 11

SD Alarm Switch

94 92 91

0860new15

™

Multi 9™ System Catalog

Section 5—Accessories

11/2014

Comb Bus Bars

UL Recognized C60 and N40 Comb Bus Bars

A Comb Bus Bar can be used to provide common service to a number of Multi 9 supplementary

protectors and accessories. This eliminates the hassle of providing discrete wiring to a number of

protective devices operating from one power source. It is available in 0.71 in. (18 mm) pole spacings

for the C60 and N40 series. It meets the UL 1077 requirements.

These are available in 1-, 2-, or 3-phase (conductor) models, and can be purchased in 12-pole (12P)

lengths.

Field wiring may be applied directly to the comb bus bar by inserting both the conductor and the tooth

of the comb into the same box lug connector of the C60N and N40N supplementary protector.

Refer also to the tooth cap accessories for the comb bus bar.

•

Rated insulation voltage: 480Y/277 Vac

•

Rated current: 63 A service single-feed

•

Available in 1-, 2-, or 3-phases (conductors)

•

Spacing of outgoing poles: 0.71 in. (18 mm)

•

Lengths: Fixed length of 12 poles

•

Height: 0.80 inches (20 mm) above circuit breaker

•

Connection: Comb tooth and main feed wire (10 AWG to 3 AWG) connect to box lug of UL 1077

C60N and C40N supplementary protector

•

UL Recognized for use with UL 1077 devices only; not CSA Recognized

Tooth Caps for UL Recognized Comb Bus Bars

Tooth Caps for UL Recognized Comb Bus Bars may be slipped onto the unused teeth of the Comb

Bus Bar. They come in strips of five with 1-pole spacing, but can be snapped apart to be used

individually.

Figure 20: UL Recognized C60 and N40 3-phase Comb Bus Bar

Table 35: Catalog Numbers for UL Recognized C60 and N40 Comb Bus Bars

Description Length Type Cat. No.

12P Comb Bus Bar 8.5 in. (216 mm)

1Ø

2Ø

3Ø

MG10285

MG10286

MG10287

Figure 21:

Table 36: Tooth Caps for UL Recognized Comb Bus Bars

Description Cat. No.

Tooth Caps for 0.71 in. (18 mm) Comb Bus Bar (20 Pieces) 60488

™

Multi 9™ System Catalog

Section 5—Accessories

Connection Comb Bus Bars for C60 UL 1077 Circuit Breakers

The comb busbars are used only for C60 circuit breakers in conformity with standards UL 1077/

CSA C22.2 No. 3345-04 / IEC 60947-2 / GB 14048-2.

They perform distribution and sub-distribution of the electric power supply and allow rapid assembly

and disassembly of equipment.

IEC

Connection Accessories Comb Bus Bars Tooth Cover End-Place Accessory

Function

• The comb bus bars make it easier to install Schneider Electric UL 1077

circuit breakers

• Power supply directly in the cage of the circuit breaker

• The Tooth Caps are insulated protectors

which may be slipped onto the unused teeth

of the comb busbar

• They come in strips with 1-pole spacing, but

can be snapped apart to be used separately

Number of poles 1P 2P 3P All

Voltage rating (Ue) 4870Y/277 Vac —

Catalog number 10285 10286 10287 60488

Number of 18 mm modules 12 (8.5 in. / 216 mm) 12 (8.5 in. / 216 mm) 12 (8.5 in. / 216 mm) —

Set of 1 1 1 29

Technical Specifications

Insulation Voltage (U) 690 V

Impulse withstand voltage (Uimp)

Acceptable current at 40°C 65 A with 1 central power supply point 100 A with 2 power supply points

Power supply via cable directly in the cage of the device:

• cross section max: 3 AWG (25 mm2)

• cross section min: 10 AWG (5.27 mm2)

Resistance to short-circuit currents Compatible with the breaking capacity of C60 YL 1077 Schneider Electric modular circuit breakers

FIre resistance Self-extinguishability 960°C 30 s/30 s

Color RAL 9001 RAL 1021

8.5

(216)

7.8

(198)

0.7

(18)

0.15

(3.8)

0.06

(1.5)

0.5

(13)

1.4

(35)

0.44

(11.2)

0.87

(22)

Dimensions: :in.

(mm)

™

Multi 9™ System Catalog

Section 5—Accessories

11/2014

Connection Comb Bus Bars for C60 UL489 Circuit Breakers

The comb busbars are used only for C60 circuit breakers in conformity with standards UL 489 /

CSA C22.2 No.5-02 or IEC 60947-2 /fitted with tunnel terminals.

They perform distribution and sub-distribution of the electric power supply and allow rapid assembly

and disassembly of equipment.

IEC

Country approval pictograms

Connection

Accessories Comb Busbar Insulated Connector Tooth Cover

End-Place

1P x 240 V - 12 modules 3p x 480Y - 12 modules 3p 480Y - Can accept

auxiliaries

Function

• The comb busbars make it easier to install Schneider Electric UL 489 circuit breakers

• They must not be cut

• Comb busbar power supply

• Vertical incoming feeder

• Insulation of teeth

remaining free

Use

• Power supply by insulated connector

• For semi-rigid copper cable of

#1–#12 AWG (4–36 mm2)

• Tightening torque: 53 lb-in

(6 N•m) max.

No. of poles 1P 2P 3P All All

Voltage rating (Ue) 240 Vac 480Y/277 Vac 240 Vac 480Y/277 Vac 240 Vac 480Y/277 Vac 240 Vac 480Y/277 Vac —

Catalog Numbers 10170 10171 10180 10181 10172 10182 10173 10183

10193110175 10185 10190

No. of 18 mm modules 6 12 6 12 12 12 — —

Set of 5 5 5 15 9

Technical Specifications

Insulation voltage (Ui) 1000 V

Impulse withstand

voltage (Uimp) 12 kA

Acceptable current at

40°C (Ia)

240 V: 100 A

480Y: 20 A —

Max. current per feeder ——

Resistance to short-

circuit currents Compatible with the breaking capacity of Schnieder Electric modular circuit breakers —

Fire resistance Self-extinguishiability 960°C 30s/30s

Color RAL9001 RAL1021

Standards UL506 UL485E —

1With spare spaces of 18 mm for electrical auxiliary.

™

Multi 9™ System Catalog

Section 5—Accessories

IEC Rated C60 Comb Bus Bars

These are available in 1-, 2-, 3- or 4-phase (conductor) models, and can be purchased in 12-pole, 24-

pole, or 54-pole (1 meter) lengths.

Refer also to the accessories for the Comb Bus Bar described below.

•

Rated insulation voltage: 500 Vac as per IEC 664.

•

Rated Current: 100 A service single-feed, 120 A double-feed

•

Available in 1-, 2-, 3-, or 4-phase (conductor) models

•

Spacing of outgoing poles: 18 mm (0.71 in.) on center

•

Lengths:12, 24, or 54 poles; may be cut to desired length

•

IEC Rated

480Y/277 V AC comb busbar and connectors

7.9

(199.4)

5.1

(129.1)

0.7

(17.8)

6.6

(167.6)

5.5

(140.6)

8.4

(213.6)

0.2

(5)

240 V AC comb busbar and connectors

8.4

(213.6) 4.0.7

(17.8)

4.2

(107) 5.2

(132.4)

6.5

(165.3)

4.4

(111.8)

0.2

(5)

Dimensions: :in.

(mm)

Figure 22: IEC Rated C60 Comb Bus Bars and End Caps

Table 37: Catalog Numbers for IEC Rated C60 Comb Bus Bars

Description Length Type Cat. No.

12P Comb Bus Bar 8.5 in. (216 mm)

1Ø

2Ø

3Ø

4Ø

A9XPH112

A9XPH212

A9XPH312

A9XPH412

24P Comb Bus Bar

(package of 2) 17 in. (432 mm)

1Ø

2Ø

3Ø

4Ø

A9XPH124

A9XPH224

A9XPH324

A9XPH424

54P Comb Bus Bar 39.4 in. (1 m)

1Ø

2Ø

3Ø

4Ø

A9XPH157

A9XPH257

A9XPH357

A9XPH457

1-Phase Length

2-Phase Length

3-Phase Length

4 -Phase Length

™

Multi 9™ System Catalog

Section 5—Accessories

11/2014

End Caps for IEC Rated C60 Comb Bus Bars

The End Caps are IEC Rated insulating devices which snap onto the ends of the Comb Bus Bar to

retain the bus bars within their protective shield and to ensure the spacing of the conductors.

Connector for IEC Rated Comb Bus Bars

The IEC Rated connectors are provided for connecting field wiring to a comb bus bar.

•

These connectors accept up to 2 AWG wiring.

•

Torque to 22 lb-in (2.5 N•m)

Tooth Caps for IEC Rated Comb Bus Bars

Tooth Caps for IEC Rated Comb Bus Bars are insulated protectors which may be slipped onto the

unused teeth of the Comb Bus Bar. Tooth caps come in strips of five with 1-pole spacing, but can be

snapped apart to be used individually.

Device Shielding

DIN Rail Spacer

The Spacer clips onto a DIN rail to occupy the space of one 0.35 in. (9 mm) module. It can be used to

provide space for future protective devices and accessories. It may also be used to provide a

ventilation gap to prevent overheating.

IEC Rated; not UL/CSA Recognized

Figure 23: Table 38: End Caps for IEC Rated C60 Comb Bus Bars

Description Type Cat. No.

End Caps for Comb Bus Bar

(10 pieces)

1Ø A9XPE110

2Ø A9XPE210

3Ø A9XPE310

4Ø A9XPE410

Figure 24:

Table 39: IEC Rated C60 Connectors

Description Wire Size Cat. No.

Connector (4 Pieces) 2 AWG (25 mm2)A9XPCM04

Table 40: Tooth Caps for IEC Rated Comb Bus Bars

Description Cat. No.

Tooth Caps for Comb Bus Bar (20 pieces) A9XPT920

Figure 25:

Table 41: Catalog Numbers for IEC Rated DIN Rail Spacer

Description Width US No. IEC No.

Spacer for IEC Rated C60 and C120 Circuit Breakers 0.354 in. (9 mm) MG27062 27062

™

Multi 9™ System Catalog

Section 5—Accessories

Interphase

Barriers

The Interphase Barriers snap onto the top and bottom of the C60 devices to provide increased

isolation distance between two adjacent connectors.

NOTE: These are not needed with the versions of C60 with UL 489/CSA C22.2 No.5 Rating nor with

the Ring Lug Terminal kit, since those products already include increased isolation barriers.

IEC Rated; not UL/CSA Recognized

Terminal Screw Shields

The Terminal Screw Shield snaps onto the front of the C60N or C120 protective devices to provide

greater insulation of the terminal screws.

IEC Rated; not UL/CSA Recognized

Terminal Covers

The Terminal Covers completely cover the terminals, either standard or screw-type connectors. They

make the use of the interphase barriers unnecessary.

IEC Rated; not UL 1077/CSA C22.2 No. 235 Recognized

Ring Lug Terminal Kit

The Ring Lug Terminal kit provides isolation barriers and ring terminals to convert a standard box lug

UL 1077 Recognized C60 supplementary protector or UL 489A DC rated Communications circuit

breaker to allow front or rear connection with ring type terminals. The kit allows a UL 1077 Recognized

C60 device

UL 489A DC rated Communications to retain its rating. It cannot be field-installed on a

UL 489/CSA C22.2 No.5 Listed C60 product. UL 489/CSA C22.2 No.5 circuit breakers may be ordered

with factory installed ring terminals.

These are user-installed. The Interphase Barriers (or Terminal Covers) cannot be used in conjunction

with the ring tongue terminal kits.

•

Torque for ring tongue into box lug: 30 lb-in. (3.4 N•m).

•

Torque for ring terminal: 18 lb-in (2.0 N•m).

Figure 26:

Table 42: Catalog Numbers IEC Rated Interphase Barrier

Description Quantity US No. IEC No.

Interphase Barriers for C60 Circuit Breakers 10 Pieces MG27001 27001

Figure 27:

Table 43: IEC Rated Terminal Screw Shields for C60 Circuit Breakers

1Not for the UL 489/CSA C22.2 No.5 Listed C60 circuit breakers.

Description Quantity Cat. No.

Terminal Screw Shield Bag of 2 strips of 4 MG26981

Table 44: Catalog Numbers for Terminal Covers for C60 Circuit Breakers

1Not for the UL 489/CSA C22.2 No.5 Listed C60 circuit breaker.

Description Device Size UL Recognized Cat. No. IEC Rated Cat. No.

Terminal Cover C60

MG26975

MG26976

MG26975 + MG26976

MG26978

26975

26976

26975 + 26976

26978

Figure 28:

™

Multi 9™ System Catalog

Section 5—Accessories

11/2014

Identification System

Snap-on Marking Symbols

The Identification System provides marking symbols which can be used on the C60 and C120 devices.

They provide pre-labeled, snap-on plastic clips with one character each. They mount just below the

toggle on the C60 devices.

The following symbols are available: Blank, 0-9, +, -, and A-Z.

Orders must specify standard package quantity of 25 strips of each character or multiples of 25.

NOTE: These are same as markers for Telemecanique AB1 terminal blocks.

IEC Rated; not UL/CSA Recognized

Table 45: UL Recognized Ring Lug Terminal Kit

Description Quantity Cat. No.

Ring Lug Terminal Kit

Two Ring Tongue Terminals

Two Isolation Shrouds

Two 5 mm Screws

17400

Figure 29:

Table 46: Catalog Numbers for Snap-on Marking Symbols

Marking Quantity Cat. No. Marking Quantity Cat. No.

Strip of 10

AB1GA

AB1GB

AB1GC

AB1GD

Strip of 10

AB1R1

AB1R2

AB1R3

AB1R4

Strip of 10

AB1GE

AB1GF

AB1GG

AB1GH

Strip of 10

AB1R5

AB1R6

AB1R7

AB1R8

Strip of 10

AB1GI

AB1GJ

AB1GK

AB1GL

Strip of 10

AB1R9

AB1R0

Strip of 10

AB1GM

AB1GN

AB1GO

AB1GP

0-9 Strip of 10 AB1R11

Strip of 10

AB1GQ

AB1GR

AB1GS

AB1GT

Strip of 10

AB1R12

AB1R13

Strip of 10

AB1GU

AB1GV

AB1GW

AB1GX Blank Strip of 10 AB1RV

Strip of 10

AB1GY

AB1GZ

™

Multi 9™ System Catalog

Section 5—Accessories

Operation Devices

Rotary Handles

A C60 or C120 protection device with 2-, 3-, or 4-poles can be equipped with a rotary handle with an

extension to allow operation of the circuit breaker from either the front or the side (lateral) from the

outside of a panel.

The handle requires that an operating subassembly be affixed to the supplementary protector or circuit

breaker. The operating subassembly requires one of two versions of the rotary handle:

— The first is a fixed handle for front or lateral mounting on a fixed panel.

— The second is a draw-out extended handle which may be mounted on a door or hinged panel.

It mates with the operating subassembly as the door is closed.

•

Minimum depth for drawout is 6.8 in. (174 mm) including circuit breaker.

•

Minimum depth for lateral installation is 4.8 in. (122 mm) including circuit breaker.

•

IEC Rated; not UL/CSA Recognized

Padlock Attachments

The Padlock Attachment clips onto the face of the C60N device to prevent the handle from being

operated. It cannot be installed or removed when padlocked. No tools are needed to install it.

The Padlock Attachment allows the IEC C60 circuit breaker to be locked in either the ON or the OFF

position (UL 489/CSA C22.2 No.5 Listed and UL 1077 Recognized devices can lock in the OFF

position only). The padlock attachment accepts a 0.315 in. (8 mm) diameter padlock, which is not

supplied.

The front plate or functional door can be opened with the circuit breaker locked in the OFF position.

NOTE: Locking the C60 or C120 in the ON position will not prevent the device from tripping under

overcurrent or ground fault conditions.

IEC Rated; not UL/CSA Recognized

Table 47: IEC Rated Rotary Handles

Description US

Cat. No.

IEC

Cat. No.

Operating Subassembly for C60 or

C120 Protection Device (Fixed to

Protection Device)

MG27046 27046

Drawout Extended Handle (Mounted on

Door or Hinged Panel) MG27047 27047

Fixed Handle Front or Lateral (Mounted

on Fixed Panel) MG27048 27048

Operating Subassembly with Lateral Rotary Handle

Padlock Attachment

Table 48: Catalog Numbers for IEC Rated Padlock Attachments

Description Quantity US Cat. No. IEC Cat. No.

Padlock Attachment for C60 Protection Device Bag of 2 MG26970 26970

Heavy-Duty Padlock Attachment for C60N Bag of 1 4LD —

Padlock Attachment for C120 Protection Device Bag of 4 MG27145 27145

™

Multi 9™ System Catalog

Section 5—Accessories

11/2014

Lock-Off Attachments

The Lock-Off Attachment is a permanently-installed, side-mounted accessory for the C60 and C120

circuit breakers to allow locking the circuit breaker in the off position. The attachment is available for

right or left side application and is made of optically clear materials so text on the side of the circuit

breaker can still be read after installation. The lock-off attachment accepts a 0.25–0.375 in. (6–9.5

mm) diameter padlock, which is not supplied.

The front plate or functional door can be opened with the circuit breaker locked in the OFF position.

UL Rated; CSA Recognized

Handle Lockoff Attachment

Table 49: Catalog Numbers for Handle Lock-Off Attachments

Description Left Hand Kit Right Hand Kit

Handle Lock-Off Kit for C60 Protection Device MGN26380 MGN26381

Handle Lock-Off Kit for C120 Protection Device MGN26382 MGN26383

™

Multi 9™ System Catalog

Section 5—Accessories

Mounting Accessories

Plug-in Base

The Plug-in Base allows permanent field wiring connections to be made to the base, so that a C60

device can be plugged in or removed without affecting field wiring.

The Plug-in Base kit includes spade connectors which must be installed on the circuit breaker so it will

mate with the Plug-in Base. The Plug-in Base provides no-load isolation of a circuit protected by C60

supplementary protectors.

While the circuit breaker is removed, the base can be locked using a 0.32 in. (8 mm) dia. padlock (not

provided).

•

Height of base: 7.0 in. (178 mm); with terminal cover extended, 9.3 in. (237 mm)

•

Allow minimum center spacing of 7.87 in. (200 mm) between two rows of bases

•

Multiple bases may be used for multi-pole devices

•

IEC Rated; not UL/CSA Recognized

Front Mounting Bracket (Kit)

The Front Mounting Bracket provides a convenient way to mount Multi 9 circuit breakers, supplementary

protectors or accessories. Its height is equal to a 35 mm DIN rail, and allows the C60 and C120 devices

to be clipped onto it in a standard manner. Its width is available for 1-, 2-, 3-, or 4-pole devices.

In 480 Vac UL 1077 applications, Cat. No. 26981 (C60) or 27152 (C120) Terminal Screw Shield should

be used for increased isolation between the terminal screws of the Multi 9 device and the mounting

bracket. These shields are included with the mounting bracket kits.

UL/CSA Recognized and IEC Rated

NOTE: See dimensional drawings in Section 7.

Figure 30:

Table 50: Catalog Numbers for IEC Rated Plug-in Base

Description US Cat. No. IEC Cat. No.

Plug-In Base for C60 Devices MG26996 26996

Figure 31:

08603537

Table 51: Catalog Numbers for Front Mounting Bracket Ordering Information

Description Size Cat. No.

Front Mounting Bracket for C60 Protective Devices

MG26983

MG26984

MG26985

MG26989

Front Mounting Bracket for C120 Protective Devices

MG26986

MG26987

MG26988

MG26990

™

Multi 9™ System Catalog

Section 5—Accessories

11/2014

DIN Rail Mounting Clips

Additional DIN Rail Mounting Clips for Multi 9 products are available.

UL/CSA Recognized Mounting Base for Multi 9 C60 Circuit Breakers

The mounting base for UL 489/CSA C22.2 No.5 240 V Multi 9 C60 miniature circuit breakers is

designed for OEM applications requiring a large number of Multi 9 circuit breakers in a single piece of

equipment. Providing a means for mounting and a bus for line power, this mounting base offers a

convenient solution to powering an entire group of circuit breakers. In addition to simplifying wiring for

multiple UL 489 240 V devices, the mounting base minimizes the cost of installation by eliminating

discrete wiring of line conductors.

The mounting bases for UL 489/CSA C22.2 No.5 240 V Multi 9 C60 circuit breakers are offered in a

variety of configurations, which meet most OEM applications. Available in lengths from 12 to 60 poles,

this mounting base handles the large number of Multi 9 circuit breakers found in OEM equipment.

The standard terminals on the US mounted base are 1-inch wide and have 1/4-20 x 1-in. studs, which

can be used with compression (ring) terminals or with a bus bar. Nuts with washers are provided for

each terminal stud. The terminals of the UL mounting base are aligned with the load terminals of the

PowerPact H- and J-frame molded case circuit breakers. This allows them to be connected using

straight, flat jumper bars.

UL/CSA Recognized for use with U489 240 V Multi 9 C60 miniature circuit breakers per UL 67, CSA

C22.2 No. 29 and IEC 60439-1. Also CE marked.

Figure 32:

Table 52: DIN Rail Mounting Clips

Description Cat. No.

DIN Rail Mounting Clip (Bag of 50) MG27124

Table 53: Specifications for Mounting Base for UL 489/CSA C22.2 No.5 Multi 9 C60 Circuit

Breakers

Voltage 240 Vac

125 Vdc

Ampacity 200 A Maximum, see table below

Withstand Rating 10 ka @ 0.05 seconds

Conductors/Bus 1, 2 and 3 Conductors, Suitable for Use with 1P, 2P and 3P Circuit Breakers

Pole Capacity 12, 24, 36, 48, 60

Branch Circuit Breakers UL 489/CSA C22.2 No.5 240 V C60 with 18 mm Spacing

Input Terminal 1 in. Wide Terminal with 1/4-20 x 1 in. Studs with Nuts/Washers for Compression Ring Lugs, Bus Bar or

Optional Lugs

Table 54: Catalog Numbers for Mounting Base for UL 489/CSA C22.2 No.5 Multi 9 C60 Circuit

Breakers

Poles

1 Conductor 2 Conductors 3 Conductors

Maximum

Amperage Cat. No Maximum

Amperage Cat. No

12 200 A US11220018 150 A US21215018 100 A US31210018

24 200 A US12420018 200 A US22420018 200 A US32420018

36 200 A US13620018 200 A US23620018 200 A US33620018

48 200 A US14820018 200 A US24820018 200 A US34820018

60 200 A US16020018 200 A US26020018 200 A US36020018

™

Multi 9™ System Catalog

Section 5—Accessories

Mounting Base Accessories

Wire Lug Kit

The optional Wire Lug Kit, Catalog Number USMBLK, can be field installed for use with cable. Each kit

consists of one lug, one nut and washer assembly. One kit must be ordered for each conductor

terminal. The lug mounts on the 1/4-in. terminal stud of the mount base and is secured with a nut with

washer. This lug accepts 6 AWG to 300 kcmil copper or aluminum cable. The barriers between the

phases provide separation between the phases; an optional terminal cover is also available.

Terminal Cover Kit

The optional Terminal Cover Kit, Catalog Number USMBTC, is designed to provide shielding of the

terminals, bus bars, lugs and cabling. Snapping onto the terminal end of the mounting base, the

terminal cover has an opening for a bus bar jumper and knock-outs to accommodate various sizes of

cable.

Optional Lug Kit USMBLK

Bus Bars Attached

(Not Provided)

Optional Terminal

Cover Kit USMBTC

™

Multi 9™ System Catalog

Section 5—Accessories

11/2014

Multi-Pole Front Mounting Kit

The Multi-Pole Front Mounting Kit consists of a transparent, hinged, weatherproof cover. It allows

installation of up to twenty modules (10 poles of C60) of Multi 9 circuit breakers or supplementary

protectors and accessories. A DIN mounting rail with support is also available.

•

Degree of protection as per IEC 529: IP55

•

Dimensions (w x h x d): 9.25 x 4.96 x 1.3 in. (235 x 126 x 33 mm)

•

Cutout dimensions: 7.32 x 3.78 in. (186 x 96 mm)

•

IEC Rated; not UL/CSA Recognized

Pole Filler

The Multi 9 M9PF4 pole filler is used to fill empty panel spaces. They clip into the space. Each M9PF4

consists of four strips of four by 18 mm pole fillers (16 poles total). They may be snapped apart in 9 mm

increments.

Figure 33:

Table 55: Catalog Numbers for IEC Rated Multi-Pole Front Mounting Kit

Description Cat. No.

Multi-Pole Front Mounting Kit with Transparent Hinged Cover

(Includes a 10-Module Divisible Blanking Plate and Mounting Template) 14210

DIN Rail with Support 14211

One Strip of M9PF4

Table 56: Pole Filler

Description Cat. No.

Pole Filler, four strips of four by 18 mm M9PF4

™

Multi 9™ System Catalog

Section 6—Additional System Devices

In addition to the C60 and C120 Circuit Breakers and Supplementary Protectors which form the heart

of the Multi 9 product line, there are a variety of other devices which may be used with C60 or C120

devices or as stand-alone devices.

These include the following:

•

CM Selector Switches (Change-Over)

•

I Current Isolating Switches

•

V Signal Lamps and BP Push Buttons

•

CI Impulse Counters and CH Hour Counters

NOTE: See Section 4 for Ground-Fault Protection Devices.

All of these devices adhere to the Multi 9 packaging format, and can be mounted on a DIN rail in the

protection and control cabinet.

NOTE: See Class 1312 Catalog (document no. 1312CT0101) for recommended protection of the SPD.

CM Selector Switches

The CM Selector Switch allows manual selection of circuits. Different models are available to allow

selection of two or three positions (including off) for one or two circuits. They have maximum ratings of

20 A and 250 Vac and accept cable up to 7 AWG (10 mm

). Torque cable to 11 in-lb (1.2 N•m).

This device may be installed on the DIN rail adjacent to the C60 device and its accessories or remotely

in a user interface panel.

IEC Rated; not UL/CSA Recognized

Figure 34:

™

Multi 9™ System Catalog

Section 6—Additional System Devices

11/2014

Table 57: IEC Rated CM Selector Switches

CM Selector

Switch Type

No. of

Circuits

No. of

Positions

Width in

Modules Cat. No.

122A9E18070

132A9E18073

224A9E18071

234A9E18074

224A9E18072

Figure 35: IEC Rated CM Selector Switch Schematics

684

2Red

Load

Green

08603320

Two

Position

Red

Load

Green

08603321

Three

Position

™

Multi 9™ System Catalog

Section 6—Additional System Devices

I Current Isolating Switch

The I Isolating Switch provides manual on-load opening or closing of a circuit. Note that it does not

provide either thermal or magnetic protection.

It can be used with the OF auxiliary switch and with other non-electrical accessories in the C60 circuit

breaker family. This device may be installed on the DIN rail adjacent to the C60 device and its

accessories or remotely in a user interface panel.

IEC Rated; not UL/CSA Recognized

Table 58: I Current Isolating Switch Termination

Amperage Wire Type Wire Size Torque

20 and 32 A Stranded 16–6 AWG 1.5–10 mm216 lb-in. 1.8 N•m

Solid 16–6 AWG 1.5–10 mm216 lb-in. 1.8 N•m

40–125 A Stranded 10–1 AWG 6–50 mm240 lb-in. 4.5 N•m

Solid 14–4 AWG 2.5–35 mm240 lb-in. 4.5 N•m

Table 59: Catalog Numbers for IEC Rated I Current Isolating Switches

Rating (A)

(250 Vac)

2 Modules

(415 Vac)

2 Modules

(415 Vac)

4 Modules

(415 Vac)

4 Modules

A9S60120

A9S60132

A9S60140

A9S60163

A9S60220

A9S60232

—

A9S60320

A9S60332

—

A9S60420

A9S60432

—

100

125

A9S60191

A9S60192

—

Figure 36: I Switches

1P 2P 4P

™

Multi 9™ System Catalog

Section 6—Additional System Devices

11/2014

Status, Display and Control Accessories

There are a variety of other accessories which may be used with the C60 or C120 devices to

communicate control and/or status information. These include the following:

•

V Type Signal Lamps

•

BP Push Buttons

•

CH Hour Counter

•

CI Impulse Counter

These accessories may be located adjacent to the C60 or C120 devices or may be located remotely.

V Signal Lamp

The V Type Signal Lamp indicates when voltage is applied to a circuit and may be used with Multi 9

circuit protection systems or other applications. The lamps are high-efficiency, long-life LEDs. The

lenses are available in a variety of colors.

This accessory device may be installed on the DIN rail adjacent to the C60 devices and its accessories

or remotely in a user interface panel. It accepts cable up to 7 AWG (10 mm

). Torque cable to 11 lb-in.

(1.2 N•m).

NOTE: IEC Rated; not UL/CSA Recognized

Table 60: Multi 9 IEC Rated V Indicator Lights

Type Width in 9 mm

Modules Color Cat No.

110-230 Vac

Cat No.

12–48 Vac/Vdc

Single LED Indicator Light

Red A9E18320 —

Green A9E18321 —

White A9E18322 —

Blue A9E18323 —

Yellow A9E18324 —

Double LED Indicator Light

2 Green/Red A9E18325 A9E18335

Blinker

2RedA9E18326

™

Multi 9™ System Catalog

Section 6—Additional System Devices

BP Push Buttons

The BP Push Button device may be used to control Multi 9 circuit protection systems or other

equipment. It provides momentary switching and is available with one N.O., one N.C., or combined

with one each N.O. + N.C. contact.

It is available with or without a signal lamp, which is available in a variety of colors. The lamps are high-

efficiency long-life LEDs.

This device may be installed on the DIN rail adjacent to the C60 and its accessories or remotely in a

user interface panel. It accepts cable up to 7 AWG (10 mm

). Torque cable to 11 lb-in. (1.2 N•m).

IEC Rated; not UL/CSA Recognized.

Figure 37:

Push Buttons with

Signal Lamps

Table 61: IEC Rated Multi 9 BP Pushbuttons Catalog Numbers

Type Width in 9 mm

Modules Power Lamp

Color

Pushbutton

Color Circuit Catalog

Number

Single BP

Grey 1 NC A9E18030

Red 1 NC A9E18031

Grey 1 NO A9E18032

Grey 1 NO + 1 NC A9E18033

Double BP

2Green/Red 1 NO / 1 NC A9E18034

Grey/Grey 1 NO / 1 NO A9E18035

Single BP + LED Indicator Light

110-230 Vac Green Grey 1 NO A9E18036

Red Grey 1 NC A9E18037

12-48 Vac/Vdc Green Grey 1 NO A9E18038

Red Grey 1 NC A9E18039

Figure 38: Schematics for IEC Rated BP Push Button Types

4x2

3x1

4x2

3x1

Push Buttons without Signal Lamps Push Buttons with Signal Lamps

1 O + C 1 C 1 O 1 C 1 O

08603519

™

Multi 9™ System Catalog

Section 6—Additional System Devices

11/2014

CH Hour Counter

The CH Hour Counter is used for measuring the total operating time of a circuit or load. It is capable of

counting to a maximum of 99,999.99 hours. It operates on 224–440 Vac, 50 Hz. The CH must be

installed downstream of a circuit breaker or supplementary protector.

The CH Hour Counter is useful for metering of activity or for scheduling maintenance.

This device may be installed on the DIN rail adjacent to the C60 and its accessories or remotely in a

user interface panel.

NOTE: IEC Rated; not UL/CSA Recognized

CI Impulse Counter

The CI Impulse Counter is an electromechanical counter designed to measure impulses produced by

various devices. It displays the running total of metered impulses up to a maximum count of 9,999,999

impulses. The CI Impulse Counter is unaffected by interruptions in the main power supply.

It is most suitable for counting impulses emitted by detectors such as kilowatt-hour metering,

temperature overrun, etc.

This device may be installed on the DIN rail adjacent to the C60 device and its accessories or remotely

in a user interface panel.

NOTE: IEC Rated; Not UL/CSA Recognized

Figure 39:

Table 62: Information for IEC Rated CH Hour Counter

Wire Size Torque

16–14 AWG 1–2.5 mm20.8 lb-in 1.1 N•m

Load

2CH

Figure 40: Schematics for IEC Rated CI Impulse Counter

Table 63: CH Hour Counter and CI Impulse Counter

Type Voltage

(Vac)

Frequency

(15% to +6%)

Width in

Modules Cat. No.

CH 220–240 50 Hz 4 15440

CI 220–240 50/60 Hz 4 15443

Table 64: Wiring Information

Wire Size Torque

16–14 AWG 1–2.5 mm20.8 lb-in 1.1 N•m

NL1

LoadLoad

NL1

Kilowatt Meter

(Wh)

08603311

™

Multi 9™ System Catalog

Section 6—Additional System Devices

Kaedra™ Weatherproof DIN Type Enclosures

Applications

•

Expandable enclosures for service, industrial, or equipment applications

•

Protects against water, dust, and chemical and atmospheric agents

•

Kaedra mini-enclosures are designed for small installations (3 to12 modules) replacing

Mini-Pragma™ weatherproof enclosures.

•

Kaedra enclosures come in seven sizes from 12 to 72 modules (18 mm per module).

Standard Features

•

IP 65: as per IEC 60529 for protection against ingress of solids and liquids.

•

IK09: Protection against shocks and resistance to chemical and atmospheric agents, ultraviolet

light, etc.

•

Class 2: Total insulation

•

Flame and abnormal heat resistance: 750°C as per IEC 60695-2-1

•

Conformity with IEC 670 standard for empty enclosures and with IEC 439-3 standard for equipped

switchboards.

•

It is made of insulating material, Class 2, and can be sealed and/or locked (keylock or insert). It

complies with IEC 60439-3 Standards.

Not UL/CSA recognized.

Construction

•

Modern, non-metallic (styrene), sturdy appearance in light gray RAL 7035; smooth surfaces and

rounded corners to increase impact strength.

•

Transparent (green) door for immediate visibility; door can be mounted left or right with clip-on

hinges; secure closing due to multiple latching points; door may be locked to limit access.

•

Punchout holes on four sides and back enable cable insertion throughout.

Installation

•

Can be installed horizontally and/or vertically

•

Enclosures can be combined and added at any time using the association kits to provide

mechanical connection and cable routing.

•

Cabling is quick and efficient with the provided terminal blocks and wiring straps.

•

Distance between rails (125, 150, 175 mm) and rail depth are adjustable. Chassis can be removed

for assembly of equipment.

•

Function identification with a clip-on label with protection cover.

™

Multi 9™ System Catalog

Section 6—Additional System Devices

11/2014

NOTE: The Kaedra Weatherproof enclosures replace the Mini-Pragma enclosures.

Accessories

Necessary accessories are included with enclosure, including: Terminal blocks and terminal block

support; one marking kit; Class II plugs.

Other options available are listed in Table 67.

Figure 41:

KAEDRA™ Weatherproof

Mini-Enclosure

08603404

Table 65: Kaedra Weatherproof Mini-Enclosures

1Accessories include: terminal blocks and terminal block support; Class II plugs.

Description

Dimensions

Cat. No.WH D

in. mm in. mm in. mm

1 Row of 3 Modules2

2Enclosure modules are 18 mm wide.

3.15 80 5.9 150 3.86 98 13956

1 Row of 4 Modules 4.84 123 7.87 200 4.41 112 13957

1 Row of 6 Modules 6.26 159 7.87 200 4.41 112 13958

1 Row of 8 Modules 7.68 159 7.87 200 4.41 112 13959

1 Row of 12 Modules 10.51 267 7.87 200 4.41 112 13960

Figure 42:

KAEDRA™ Weatherproof

Enclosure

08603405

Table 66: Kaedra Weatherproof Enclosures

1Accessories include: Terminal blocks and terminal block support; 1 marking kit per row; 1 wiring strap per row;

Class II plugs, and blanking plates (5 x 18 mm modules per row).

Description

Dimensions

Cat. No.WH D

in. mm in. mm in. mm

1 Row of 12 Modules2

2Enclosure modules are 18 mm wide.

13.39 340 11.02 280 6.23 160 13962

2 Rows of 12 Modules 13.39 340 18.11 460 6.23 160 13964

3 Rows of 12 Modules 13.39 340 24.02 610 6.23 160 13966

1 Row of 18 Modules 13.39 340 11.02 280 6.23 160 13963

2 Rows of 18 Modules 13.39 340 18.11 460 6.23 160 13965

3 Rows of 18 Modules 13.39 340 24.02 610 6.23 160 13967

4 Rows of 18 Modules 13.39 340 33.15 842 6.23 160 13968

Table 67: Kaedra Weatherproof Enclosure Accessories

Description Cat. No.

Association Kit (2 Sleeves + 4 Nuts + 4 Washers) 13934

Blanking Plate (Set of 10 x 5 Modules) 13940

Sealing Kit (2 Screws, 5 Fasteners) 13947

Keylock (Eurolock no. 850) 13948

Plain Front Plate, 12 Modules 13944

Plain Front Plate, 18 Modules 13945

Cable Gland, PG11 (0.732 in./18.6 mm) 83992

Cable Gland, PG13.5 83993

Cable Gland, PG16 (0.886 in./22.5 mm) 83994

Cable Gland, PG21 (1.114 in./28.3 mm) 83995

Cable Gland, PG29 (1.457 in./37 mm) 83996

Cable Gland, PG36 (1.85 in./47 mm) 83997

™

Multi 9™ System Catalog

Section 7—Dimensions

UL 489/CSA C22.2 No. 5 Listed C60 Circuit Breakers

Figure 43: UL 489/CSA C22.2 No.5 Listed C60 240 Vac

Circuit Breaker with Box Lug Terminals

Figure 44: UL 489/CSA C22.2 No.5 Listed C60 240 Vac

Circuit Breaker with Ring Tongue Terminals

Figure 45: UL 489/CSA C22.2 No.5 C60 480 Vac and 240

Vac Circuit Breaker with Fingersafe Shields

1.73

(44)

2.76

(70)

0.22

(5.5)

1.77

(45.1)

Clearance

0.63

(16)

2.13

(54)

1.42

(36)

0.71

(18)

1.22

(31.1)

2.08

(52.9)

2.13

(54.1)

4.21

(107)

1.22

(31.1)

08603364

1.73

(44)

2.76

(70)

0.22

(5.5)

1.77

(45.1)

0.63

(16)

2.13

(54)

1.42

(36)

0.71

(18)

1.54

(39.2)

2.41

(61.2)

2.45

(62.2)

4.86

(123.4)]

1.54

(39.2)

08603365

0.71

(18)

1.73

(44)

2.76

(70)

0.22

(5.5)

5.59

(142)

1.77

(45)

0.63

(16)

1.42

(36)

2.13

(54)

08603427

Dimensions: in.

(mm)

™

Multi 9™ System Catalog

Section 7—Dimensions

11/2014

UL 1077 Supplementary Protectors

IEC Rated Circuit Breakers

Figure 46: C60 UL 1077 Supplementary Protectors

0.71

(18)

1.73

(44)

2.76

(70)

0.22

(5.5)

3.19

(81)

1.77

(45)

0.63

(16)

1.42

(36)

2.13

(54)

2.83

(72)

Dimensions: in.

(mm)

Figure 47: IEC N40 Circuit Breaker Figure 48: C60 IEC Circuit Breakers

Figure 49: C120 IEC Circuit Breaker

3.19

(81)

0.71

(18)

2.76

(70)

1.73

(44)

0.63

(16)

0.22

(95.5)

1.77

(45)

08603217

0.71

(18)

1.73

(44)

2.76

(70)

0.22

(5.5)

3.19

(81)

1.77

(45)

0.63

(16)

1.42

(36)

2.13

(54)

2.83

(72)

1.06

(27)

1.73

(44)

2.76

(70)

0.22

(5.5)

3.19

(81)

1.77

(45)

0.63

(16)

2.13

(54)

3.19

(81)

4.25

(108)

Dimensions: in.

(mm)

™

Multi 9™ System Catalog

Section 7—Dimensions

UL and IEC Rated Ground-Fault Products

Figure 50: UL GFP Ground-Fault Protector and IEC ID Residual Current Switch

1.73

(44)

2.72

(69)

0.24

(6)

3.19

(81)

1.77

(45)

0.59

(15)

1.42

(36)

2.83

(72)

08603221

4-pole

2-pole

Figure 51: IEC Vigi Ground-Fault Module for C60 Devices

1.73

(44)

2.76

(70)

0.22

[5.5]

1.77

(45)

0.94

(24)

0.63

(16)

3.43

[87]

3.43

(87)

1.06

(27)

2.12

(54)

08603512

3-, 4-pole

2-pole 1.42

(36)

2.48

(63)

3-, 4-pole

2-pole

25 A 63 A

Figure 52: IEC Vigi Ground-Fault Module for C120 Devices

3-, 4-pole

2-pole

1.73

(44)

2.76

(70)

0.22

(5.5)

3.19

(81)

1.77

(45)

0.63

(16)

2.13

(54)

4.25

(108)

08603461

Dimensions: :in.

(mm)

™

Multi 9™ System Catalog

Section 7—Dimensions

11/2014

Accessory Dimensions

Figure 53: OF Auxiliary Switch, SD Alarm Switch, MN

Undervoltage Release and MX + OF Shunt Trip

with Auxiliary Switch for C60 and C120

Figure 54: OFS Auxiliary Switch and Adapter for GFP

Ground-Fault Protector and ID Residual

Current Switch

Figure 55: TM Motor Operator for C60 Devices Figure 56: Spacer for C60 and C120 Devices

Figure 57: Interphase Barriers for C60 Devices Figure 58: Terminal Screw Shield for UL 489A, UL 1077

and IEC C60 Devices

0.35

(9) 1.73

(44)

2.68

(68)

0.22

(5.5)

1.77

(45)

0.63

(16)

0.71

(18)

3.35

(85)

3.31

(84)

08603187

and

C60 or C120

08603422

.35

(9) .24

(6)

2.4

(60.5)

1.7

(44)

3.0

(76)

3.5

(88)

1.8

(45)

1.73

(44)

2.95

(75)

0.24

(6)

3.19

(81)

3.19

(81)

1.77

(45)

2.48

(63)

4.61

(117)

3-, 4-pole

1-, 2-pole

08603527

1.38

(35)

0.59

(15)

1.77

(45)

0.63

(16)

0.35

(9)

0.75

(19)

1.77

(45)

4.21

(107)

08603425

2.76

(70)

0.22

(5.5)

3.19

(81)

0.79

(20)

0.79

(20)

6.02

(153)

1.42

(36)

1.73

(44)

2.13

(54)

2.83

(72)

08603117

0.37

(9.5)

2.76

(70)

1.73

(44)

0.22

(5.5)

3.19

(81)

4.13

(105)

2.83

(72)

0.37

(9.5)

08603116

Dimensions: :in.

(mm)

™

Multi 9™ System Catalog

Section 7—Dimensions

Figure 59: Plug-In Base for UL 489A, UL 1077 and

IEC C60 Devices

Figure 60: Terminal Cover for UL 489A, UL 1077 and

IEC C60 Devices

0.71

(18)

2.68

(68)

6.93

(176)

6.54

(166) 0.69

(17.5)

0.69

(17.5)

08603239

2.76

(70)

1.93

(49)

0.22

(5.5)

3.19

(81)

1.42

(36)

1.42

(36)

2.83

(72)

6.02

(153)

08603188

Figure 61: Front Mounting Bracket Kit

Dimension A

No. of

Poles in. mm Catalog

No.

Bracket for C60 (18 mm/pole)

0.75

1.46

2.32

2.87

MG26983

MG26984

MG26985

MG26989

Bracket for C120 (27 mm/pole)

1.10

2.16

3.23

4.29

109

MG26986

MG26987

MG26988

MG26990

1.38

(35)

0.69

(17.5)

0.40

(10)

0.40

(10)

2.17

(55)

08603238

MERLINGERIN

multi 9

C60N

63A-type C

480Vac

IEC

O-OFF

Cat. No. 24474

For 5/32 in.

(4 mm)

Self-tapping

Terminal Screw Shields

Machine

Screw

Dimensions: :in.

(mm)

Figure 62: Rotary Handle for C60 Devices

6.41–13.0

(163–330) 1.73

(44)

3.35

(85)

08603592

1.18–8.27

(30–210)

4.45

(113)

0.51

(13)

1.97

(50)

0.39

(10)

0.73

(18.5)

Front Rotary Handle Lateral Rotary Handle

Dimensions: in.

(mm)

™

Multi 9™ System Catalog

Section 7—Dimensions

11/2014

Figure 63: Comb Bus Bar Dimensions

0.7

(18)

0.15

(3.8)

7.8

(198)

0.5

(13)

0.6

(1.5)

0.87

(22)

1.4

(35)

8.5

(216)

0.44

(11.2)

08603408

Dimensions: :in.

(mm)

Figure 64: Multi 9 UL C60 Mounting Base

3 (75)

Dimensions: inches (mm)

8.9 (225)

5.1 (130)

Number of Poles A B

12 5 (127) 10.2 (258)

24 9.2 (235) 14.4 (366)

36 13.5 (343) 18.7 (474)

48 17.7 (451) 23 (582)

60 22 (559) 27.2 (690)

Terminal studs 1/4 - 20

0.33 (8.5)

.8 (21)

2.3 (58)

1.1 (29)

1.3 (33) 2.2 (56)

.5 (13)

4.7 (120)

1.9 (49)

Dimensions: in.

(mm)

™

Multi 9™ System Catalog

Section 7—Dimensions

Figure 65: IEC MSC Chassis for C60 Devices

0.87

(22)

0.47

(12)

0.24 x 0.47

(6 x 12)

3.72

(94.5)

5.91

(150)

8.43

(214)

0.39

(10)

0.91

(23)

0.91

(23)

1.77

(45)

0.59

(15)

1.42

(36)

7.64

(194)

5.79

(147)

2.34

(59.5)

2.34

(59.5)

1.38

(35)

1.38

(35)

0.35

(9)

0.71

(18)

0.26

(6.5)

Section X-X

Miniature Circuit Breaker

DIN Rail

08603621

User

Provided

Panel

Dimensions: :in.

(mm)

Table 68: MSC Chassis for C60 Devices

Type Number of Poles

Dimensions

A1BC

in. mm in. mm in. mm

MSC DC

(for C60 2 pole)

11.7

13.2

14.6

299

335

371

4.33

5.75

7.17

110

146

182

2.13

3.54

4.57

116

MSC 18

(for C60 3 pole)

11.7

13.9

15.9

299

353

405

4.33

6.46

8.58

110

164

218

15.9

8.58

6.38

405

218

162

MSC 27

(for C120 3 pole)

17.0

21.7

26.5

432

551

673

9.57

14.35

19.13

162

243

324

4.25

7.44

10.63

108

189

270

1For TF suffix (top feed only), reduce length by 3.72 in. (94.5 mm).

™

Multi 9™ System Catalog

Section 7—Dimensions

11/2014

Figure 66: Multi-Pole Front Mounting Kit for C60 Devices

Figure 67: Bracket for Front Mounting Kit Figure 68: M9PF4 Pole Filler

08603522

R =

12 Ø

7.28

(185)

4.96

(126)

3.74

(95)

0.75

(19)

9.25

(235)

2.24

(57)

2.24

(57)

4.11

(104.5]

4.11

(104.5)

4.00

(101.5)

4.00

(101.5)

2.17

(55)

2.17

(55)

3.78

(96)

7.32

(186)

0.20

(5)

0.08

(2)

1.59

(40.5) 1.26

(32)

1.26

(32)

1.59

(40.5)

08603424

8.2

(209)

4 Ø .16

(4)

2.9

(74)

3.2

(81)

2.5

(64)

8.0

(203)

0.71

(18)

2.83

(72)

2.01

(51)

1.77

(45)

.20

(5)

08603585

Figure 69: SPD Surge Protectors

2.80

(71]

3.39

(86)

2.56

(65)

1.77

(45)

3.62

(92)

2-Pole Front

1-Pole Front

Optional

Connector

1-Pole Side 2- and 4-Pole Side

4-Pole Front

1.77

(45)

2.56

(65)

1.77

(45)

3.39

(86)

3.62

(92)

2.57

(67)

2.57

(67)

3.50

(89)

1.42

(36)

0.71

(18)

3.74

(95)

Optional

Connector

08603586

Dimensions: in.

(mm)

™

Multi 9™ System Catalog

Section 7—Dimensions

Figure 70: CM Switches Figure 71: I Switch (20–32 A)

Figure 72: I Switch (40–125 A) Figure 73: V Signal Lamps

Figure 74: BP Push Buttons Figure 75: CH Hour Counter

Figure 76: CI Impulse Counter

1.57

(40)

2.36

(60)

0.39

(10)

0.22

(5.5)

1.77

(45)

0.71

(18)

3.23

(82)

1.42

(36)

08603234

1-circuit 2-circuit

1.57

(40)

2.76

(70)

0.22

(5.5)

1.77

(45)

0.71

(18)

3.03

(77)

1.42

(36)

08603299

2.76

(70)

0.22

(5.5)

3.23

(82)

0.71

(18)

1.77

(45)

1.42

(36)

1.57

(40)

2.13

(54)

2.83

(72)

2.36

(60)

08603230

1.57

(40)

2.36

(60)

0.16

(4)

0.22

(5.5)

1.77

(45)

0.71

(18)

3.23

(82)

08603232

Dimensions: :in.

(mm)

1.57

(40)

2.36

(60)

0.24

(6)

0.22

(5.5)

1.77

(45)

0.71

(18)

3.23

(82)

08603233

1.46

(37)

2.56

(65)

0.24

(6)

1.77

(45)

3.23

(82)

1.42

(36)

08603236

1.73

(44)

2.36

(60)

0.20

(5)

1.77

(45)

3.23

(82)

1.42

(36)

08603235

Dimensions: in.

(mm)

™

Multi 9™ System Catalog

Section 7—Dimensions

11/2014

Kaedra Weatherproof Mini-Enclosure Dimensions

Table 69: Kaedra Weatherproof Mini-Enclosure Dimensions

No. of

Modules

LHWeight

Cat. No.

in mm in mm lbs grams

3 3.1 80 5.9 150 0.66 300 13956

4 4.8 123 7.9 200 0.99 450 13957

6 6.3 159 7.9 200 1.32 600 13958

8 7.7 195 7.9 200 1.76 800 13959

12 10.5 267 7.9 200 1.98 900 13960

Figure 77: Kaedra Weatherproof Mini-Enclosures

5.51

(140)

1.18

(30)

5.51

(140)

1.18

(30)

1.71

(43.5)

1.40

(35.5)

2.76

(70)

4.40

(111.5)

1.87

(47.5)

1.71

(43.5)

1.55

(39.3)

0.90

(22.8)

0.73

(18.5)

0.14

(3.5)

08603587

Dimensions: :in.

(mm)

Figure 78: Top View for Kaedra Weatherproof Type Mini Enclosures

.83

(21)

.67

(17)

.67

(17)

4.13

(105)

08603588

4.84

(123)

.67

(17] .74

(18,5)

.85

(21,5) .85

(21,5)

.83

(21)

.83

(21)

.83

(21) .83

(21)

1.14

(29)

.91

(23)

2.56

(65]

7.70

(195)

.91

(23)

.91

(23)

.91

(23)

.91

(23)

.91

(23)

1.14

(29)

1.14

(29)

.91

(23)

6.25

(159)

.74

(18,5) .74

(18,5)

.74

(18,5)

10.5

(267)

.85

(21,5)

1.77

(45)

1.77

(45)

[37,5]

.83

(21)

.83

(21)

1.14

(29)

1.14

(29)

1.14

(29)

.91

(23)

.91

(23)

.85

(21,5]

1.38

(35)

2.56

(65)

2.56

(65)

1.38

(35)

1.67

(42,5)

1.67

(42,5)

2.95

(75)

2.95

(75)

1.06

(27)

1.00

(25,5)

3 Modules 4 Modules 6 Modules 8 Modules

12 Modules

Dimensions: :in.

(mm)

™

Multi 9™ System Catalog

Section 7—Dimensions

Kaedra Weatherproof Enclosures

Table 70: Kaedra Weatherproof Enclosure Dimensions (12 Module)

A B C Weight Cat. No.

in mm in mm in mm lbs grams

11.02 280 4.65 118 3.19 81 4.19 1900 13962

18.11 460 9.88 251 4.15 104.5 7.28 3300 13964

24.02 610 15.79 401 4.15 104.5 9.04 4100 13968

Figure 79: Kaedra Weatherproof Type Enclosures (12 Module)

08603589

13.39

(340)

7.01

(178)

1.26

(32) (*)

7.01

(178)

4.69

(119)

4.69

(119)

4.17

(106)

4.17

(06)

3.62

(92)

3.62

(92)

2.52

(64)

2.52

(64)

.67

(17)

1.46

(37)

2.83

(72)

2.36

(60)

.73

(18,6)

.73

(18,6)

.88

(22,5)

1.73

(44)

1.06

(27)

1.26

(32)

1.46

(37)

5.51

(140)

5.51

(140)

.88

(22,5)

1.11

(28,3)

1.11

(28,3)

1.26

(32)

Front View Side View Side View

Dimensions: :in.

(mm)

Table 71: Kaedra Weatherproof Enclosure Dimensions (18 Module)

A B C Weight Cat. No.

in mm in mm in mm lbs grams

11.02 280 4.65 118 3.19 81 5.29 2400 13963

18.11 460 9.88 251 4.15 104.5 9.04 4100 13965

24.02 610 15.79 401 4.15 104.5 12.35 5600 13967

33.15 842 24.92 633 4.15 104.5 14.55 6600 13968

Figure 80: Kaedra Weatherproof Type Enclosures (18 Module)

08603590

7.01

(178)

17.64

(448)

7.76

(194)

7.76

(194)

1.26

(32) (*)

7.01

(178)

1.85

(47)

3.19

(81)

4.65

(118)

6.30

(160)

6.65

(169) 6.65

(169)

6.30

(160)

4.65

(118)

3.19

(81)

1.85

(47)

.73

(18,6)

1.06

(27)

1.26

(32)

2.76

(70)

.88

(22,5)

.88

(22,5)

1.11

(28,3)

1.45

(37)

1.85

(47)

1.11

(28,3)

1.11

(28,3)

1.26

(32)

Front View Side View Side View

Dimensions: :in.

(mm)

™

Multi 9™ System Catalog

Section 7—Dimensions

11/2014

Table 72: Kaedra Cable Glands for Weatherproof Enclosures

Cable Size Drilling Diameter Thread Diameter Pre-Punchout Cat. No.

in mm in mm mm mm

0.354–0.433 9–11 0.740 18.8 18.6 PG 11 83992

0.354–0.472 9–12 0.815 20.7 20.4 PG 13.5 83993

0.394–0.512 10–13 0.898 22.8 22.5 PG 16 83994

0.551–0.669 14–17 1.125 28.6 28.3 PG 21 83995

0.748–1.024 19–26 1.472 37.4 37 PG 29 83996

1.102–1.417 28–36 1.870 47.5 47 PG 36 83997

Figure 81: Kaedra Horizontal Side-by-Side Interconnection References

1.26 in

(32 mm)

3.98

(101) 4.65

(118)

4.65

(118)

4.65

(118)

4.65

(118)

4.49

(114)

4.49

(114)

3.3

(84)

4.65

(118)

4.65

(118)

33.15

(842]

24.02

(610)

18.11

(460)

2.44

(62)

2.60

(66)

2.60

(66)

2.44

(62)

2.44

(62)

3.46

(88)

11.02

(280)

4.65

(118)

3.98

(101)

7.09

(180)

13.19

(335)

3.98

(101)

3.98

(101)

3.19

(81)

3.19

(81)

3.05

(77,5)

3.19

(81)

3.19

(81)

08603591

2 Modules 4 Modules

6 Modules

8 Modules

12 Modules

Dimensions: :in.

(mm)

™

Multi 9™ System Catalog

Section 8—Applications

Degree of Protection (IP)

The IEC 529 Standard publication or the European EN 60529 Standard define the IP degree of

protection characterizing the ability of a device to withstand the two external influences below:

•

Ingress of solid bodies and protection of people

•

Ingress of water

The IP contains two digits, one for each of these external influences, and is assigned to the device

after a series of tests defined by the NF EN 60529 Standard. The IP degree of protection must always

be read and understood digit by digit and not globally. The two IP digits may contain an optional letter

which indicates the enclosure’s ability to protect people against access to live parts.

The degrees of protection given in this catalog apply for enclosures as described here. However, the

initial degree of protection can only be maintained if the device is properly assembled and installed.

Class 2: The term “double insulation” is also used. This consists of backing up the main insulation of an

electrical device by an additional insulation in order to protect people against direct contact.

Table 73: Explanation of IP Degree of Protection Digits

1When mounted outdoors, the IP

≥

54 enclosures must be equipped with a protectable top, or installed in a shelter.

First Digit

Solid Body Protection

Second Digit

Liquid Protection

Third Digit

Mechanical Protection

IP Tests IP Tests IP Tests IK

0 No protection 0 No protection 0 No protection 00

Protected against solid

bodies larger than 1.97 in.

(50 mm), e.g., accidental

hand contact

Protected against

vertically falling water

droplets

(condensation)

1Impact energy

0.225 joules 02

Protected against solid

bodies larger than 0.47 in.

(12 mm), e.g., fingers

Protected against

falling water droplets

up to 15° from vertical

3Impact energy

500 joules 04

Protected against solid

bodies larger than 0.098 in.

(2.5 mm), e.g., tools, wires

Protected against

rainwater up to 60°

from vertical

5Impact energy

2.00 joules 07

Protected against solid

bodies larger than 0.039 in.

(1 mm), e.g., fine tools, small

wires

Protected against

water spray from all

directions

7Impact energy

6.00 joules 08

5Protected against dust (no

harmful deposit) 5

Protected against

water splashes from

all directions by jet

pipes

Impact energy

20.00 joules 10

6Completely protected against

dust 6

Protected against

water splashes/waves

(of the heavy sea kind)

7Protected against

immersion effects

(50 mm)

1.97 in

08603562

08603563

(12.5 mm

0.492 in.

08603564

15°

08603565

(12.5 mm

0.492 in.

08603564

60°

08603567

(1 mm)

0.039 i

08603568

08603570

08603573

08603575

08603576

™

Multi 9™ System Catalog

Section 8—Applications

11/2014

Vibration

Mechanical Shock (IK)

As per IEC 68.2.27 Standard: 1.06 oz./30 g, 18 ms., 3 shocks per axis.

Standard EN 50.102 defines an IK code characterizing the ability of a device to withstand mechanical

shocks. The IK code replaces the third digit of the old IP.

Protection of 400 Hz Circuits

The C60 and C120 miniature circuit breakers are designed to be applied on 50/60 Hz systems and can

be re-rated for use on 400 Hz systems.

•

Thermal: No variation

•

Magnetic increase in thresholds multiplier:

— N40: 1.50

— C60N: 1.48

— C120H: 1.40

Vigi ground-fault modules and residual current circuit breakers and switches can also be used on 400

Hz systems. Note in Figure 82 that the mA threshold varies according to system frequency.

Table 74: Vibration as per IEC 68.2.6 Standard

1Results depend on magnetic trip level. Five frequency sweeps per axis.

Curve Sequence Vibration

Curve B Sequence S3: 0.14 oz. (4 g) 5–13 Hz: ±0.24 in. (6 mm)

13–300 Hz: 0.14 oz. (4 g)

Curve C and D Sequence S6: 0.25 oz. (7 g) 5–58 Hz: ±0.02 in. (0.5 mm)

58–300 Hz: 0.25 oz. (7 g)

Table 75: 400 Hz Circuits

Type No. of Poles

Interrupting Ratings (Vac)

240 277 480Y/277

C60N

(0.5–63 A)

2P, 3P and 4P

4,000

3,000

—

3,000

C120H (50–80 A) 1P

2P, 3P and 4P

3,000

—

C120H (10–40 A) 1P

2P, 3P and 4P

5,000

4,000

—

4,000

™

Multi 9™ System Catalog

Section 8—Applications

Temperature Rating

The operating current of the circuit breakers varies depending on the ambient temperature in

which the circuit breaker is located.

If the circuit breaker is installed in an enclosure or in a hot room (boiler room, etc.), the current needed

to trip the circuit breaker in the event of an overload will be lower. If the ambient temperature exceeds

the circuit breaker’s reference temperature, the supplementary protective device or the circuit breaker

will then be “derated”. That is why circuit breaker manufacturers supply tables showing the derated

current (A) to be applied for given temperatures. NB: In the event of an ambient temperature less than

the rated temperature, the supplementary protective device or the circuit breaker is “uprated”.

Moreover, when several circuit breakers operating simultaneously are mounted side by side in

a small enclosure, the temperature rise inside the enclosure entails a reduction in the operating

current.

This mutual temperature rise in theory requires the application of an additional derating factor of 0.8.

Table 76: Curve Sensitivity at 400 Hz

Class Rating

(A)

Curve No. Sensitivity (mA)

10 30 100 300

N40 Residual Current Circuit Breakers

≤

25 —

C60 Vigi Ground-Fault Module

110/220 V, 50 Hz Vigi C60

≤ 25 —

≤ 63 — —

2P, 3P, 4P 220/415 V, 50 Hz Vigi C60

≤ 25 —

≤ 63 — —

AC —

C120 Vigi Ground-Fault Module

AC ≤ 100 — —

AC ≤ 100 —

ID Residual Current Switch

25 —

25–40 —

63–80–100 —

AC 63–80–100 — — —

0.5

1.5

10 50 60 Hz90 150 250 350

2.5

400

IΔn

0.5

1.5

10 50 60 Hz90 150 250 350

2.5

400

IΔn

0.5

1.5

10 50 60 H

90 150 250 350

2.5

400

IΔn

0.5

1.5

10 50 60 Hz90 150 250 350

2.5

400

IΔn

08603574

DPN-N Residual Current Circuit Breaker C60 VIGI Ground-fault Module

NC100 VIGI Ground-fault Module ID Residual Current Switch

Figure 82: Protection of 400 Hz Circuits

™

Multi 9™ System Catalog

Section 8—Applications

11/2014

NOTE: The UL 489/CSA C22.2 No.5 Listed Multi 9 C60 circuit breakers are calibrated at 77°F (25°C),

unlike some other UL 489/CSA 22.2 No.5 circuit breakers which are calibrated at 104°F (40°C).

Depending on the operating environment, you may need to rerate according to these tables to

determine the appropriate handle rating.

NOTE: UL 489/CSA C22.2 No.5 Listed circuit breakers should be loaded to no more than 80% if used

with continuous loads.

Table 77: Rated Temperatures for UL Listed Circuit Breakers and UL Recognized C60 Supplementary Protectors

(The reference temperature is in half-tone color.)

Rating

(A)

-22°F

-30°C

-13°F

-25°C

-4°F

-20°C

5°F

-15°C

14°F

-10°C

23°F

-5°C

32°F

0°C

41°F

5°C

50°F

10°C

59°F

15°C

68°F

20°C

77°F

25°C

86°F

30°C

104°F

40°C

122°F

50°C

140°F

60°C

158°F

70°C

0.5

1.2

1.5

1.26

1.21

1.26

1.32

1.24

1.19

1.24

1.29

1.22

1.18

1.22

1.27

1.20

1.16

1.20

1.24

1.17

1.14

1.17

1.21

1.15

1.12

1.15

1.19

1.13

1.10

1.13

1.16

1.10

1.08

1.10

1.13

1.08

1.06

1.08

1.10

1.05

1.04

1.05

1.07

1.03

0.02

1.03

1.00

0.97

0.98

0.97

0.92

0.93

0.92

0.89

0.85

0.89

0.85

0.81

0.79

0.84

0.79

0.73

0.72

0.79

0.72

0.63

1.21

1.27

1.25

1.26

1.19

1.25

1.23

1.24

1.18

1.22

1.21

1.22

1.16

1.20

1.19

1.14

1.18

1.17

1.12

1.15

1.10

1.13

1.12

1.13

1.08

1.11

1.10

1.06

1.08

1.07

1.08

1.04

1.05

1.02

1.03

1.00

0.98

0.97

1.97

0.93

0.91

0.92

0.89

0.85

0.86

0.84

0.78

0.80

0.79

0.71

0.73

0.72

1.23

1.29

1.28

1.21

1.26

1.25

1.19

1.24

1.23

1.17

1.22

1.21

1.15

1.19

1.18

1.13

1.17

1.16

1.11

1.14

1.13

1.09

1.11

1.07

1.09

1.08

1.05

1.06

1.02

1.03

1.00

0.98

0.97

0.93

0.91

0.87

0.84

0.85

0.82

0.76

0.78

0.76

0.68

0.70

1.20

1.28

1.24

1.23

1.18

1.25

1.22

1.21

1.16

1.23

1.20

1.19

1.15

1.21

1.18

1.17

1.13

1.18

1.16

1.15

1.11

1.16

1.14

1.13

1.09

1.13

1.11

1.08

1.11

1.09

1.06

1.08

1.07

1.04

1.06

1.05

1.02

1.03

1.02

1.00

0.98

0.97

0.98

0.94

0.91

0.93

0.90

0.85

0.87

0.85

0.78

0.81

0.82

0.80

0.70

0.75

0.76

1.24

1.30

1.23

1.31

1.22

1.27

1.21

1.29

1.20

1.25

1.19

1.26

1.18

1.22

1.17

1.23

1.16

1.20

1.15

1.21

1.14

1.17

1.13

1.18

1.11

1.15

1.11

1.15

1.09

1.12

1.09

1.12

1.07

1.09

1.07

1.09

1.05

1.06

1.04

1.06

1.02

1.03

1.02

1.03

1.00

0.98

0.97

0.98

0.97

0.93

0.90

0.93

0.90

0.87

0.83

0.88

0.82

0.81

0.75

0.82

0.74

0.75

0.66

0.77

0.64

1.23

1.29

1.27

1.21

1.27

1.25

1.19

1.24

1.22

1.17

1.22

1.20

1.15

1.19

1.18

1.13

1.17

1.15

1.11

1.14

1.13

1.09

1.11

1.07

1.09

1.08

1.05

1.06

1.05

1.02

1.03

1.00

0.98

0.97

0.93

0.90

0.91

0.88

0.84

0.85

0.82

0.76

0.78

0.76

0.67

0.71

Table 78: Rated Temperatures for IEC Rated N40 Circuit Breakers

Ampere

Rating (A)

68°F

20°C

77°F

25°C

86°F

30°C

95°F

35°C

104°F

40°C

113°F

45°C

122°F

50°C

131°F

55°C

140°F

60°C

1.04

1.02

1.00

0.98

0.97

0.98

0.96

0.94

0.96

0.93

0.94

0.92

0.93

0.91

0.89

0.91

0.89

0.86

0.89

0.86

0.82

0.86

1.05

1.04

1.03

1.02

1.00

0.97

0.98

098

0.95

0.92

0.93

0.89

0.90

0.91

0.86

0.87

0.88

0.83

0.85

0.86

1.05

1.03

1.00

0.97

0.95

0.92

0.89

0.86

0.83

™

Multi 9™ System Catalog

Section 8—Applications

Table 79: Rated Temperature for IEC Rated C60H (C Curve) and C60L (B and C Curve) Circuit Breakers

Ampere

Rating (A)

68°F

20°C

77°F

25°C

86°F

30°C

95°F

35°C

104°F

40°C

113°F

45°C

122°F

50°C

131°F

55°C

140°F

60°C

1.05

1.04

1.06

1.02

1.03

1.00

0.98

0.97

0.95

0.96

0.94

0.93

0.94

0.90

0.91

0.90

0.92

0.87

0.88

0.90

0.83

0.84

0.85

0.87

0.79

0.81

1.04

1.06

1.05

1.02

1.03

1.00

0.98

0.97

0.96

0.93

0.95

0.94

0.90

0.92

0.86

0.89

0.90

0.82

0.86

0.87

0.88

0.78

0.83

0.84

1.05

1.03

1.00

0.97

0.98

0.97

0.95

1.19

0.95

0.92

0.93

0.92

0.91

0.89

0.88

0.86

0.88

0.86

0.85

0.83

0.86

0.81

63 1.05 1.03 1.00 0.97 0.92 0.90 0.86 0.82 0.78

Table 80: Rated Temperatures for IEC Rated C60 (D Curve) and C60L (B, C, Z and K Curve) Circuit Breakers

Ampere

Rating (A)

68°F

20°C

77°F

25°C

86°F

30°C

95°F

35°C

104°F

40°C

113°F

45°C

122°F

50°C

131°F

55°C

140°F

60°C

1.10

1.09

1.14

1.13

1.08

1.07

1.10

1.05

1.04

1.07

1.06

1.03

1.02

1.04

1.03

1.00

0.97

0.98

0.96

0.97

0.95

0.92

0.93

0.92

0.93

0.88

0.89

0.90

0.84

0.86

1.08

1.14

1.12

1.11

1.06

1.11

1.09

1.08

1.04

1.07

1.06

1.02

1.04

1.03

1.00

0.98

0.96

0.97

0.96

0.92

0.94

0.93

0.88

0.90

0.91

0.84

0.87

0.88

1.11

1.10

1.11

1.12

1.08

1.07

1.09

1.06

1.05

1.06

1.03

1.00

0.97

0.94

0.95

0.94

0.93

0.91

0.92

0.91

0.90

0.87

0.89

0.87

0.86

63 1.14 1.11 1.07 1.04 1.00 0.96 0.92 0.88 0.84

Table 81: Rated Temperatures for IEC Rated C120 Circuit Breakers

Ampere

Rating (A)

68°F

20°C

77°F

25°C

86°F

30°C

95°F

35°C

104°F

40°C

113°F

45°C

122°F

50°C

131°F

55°C

140°F

60°C

1.10

1.06

1.13

1.08

1.07

1.03

1.10

1.06

1.05

1.00

1.05

1.04

1.03

1.00

1.03

1.02

1.00

0.95

0.97

0.95

0.96

0.90

0.94

0.93

0.92

0.87

0.91

0.90

0.85

0.88

0.85

0.88

1.13

1.14

1.15

1.09

1.10

1.12

1.06

1.08

1.03

1.04

1.00

0.97

0.96

0.92

0.93

0.91

0.88

0.87

0.84

0.82

100

125

1.15

1.12

1.11

1.12

1.10

1.08

1.04

1.00

0.96

0.92

0.90

0.87

0.86

0.83

0.82

™

Multi 9™ System Catalog

Section 8—Applications

11/2014

Typical IEC Grounding Systems

All electrical installations complying with safety standards and regulations are grounded in order to

protect people and equipment. The term “grounding system” standardizes the grounding method used

in the installation. The grounding system runs:

•

First, from the neutral of the secondary side of the transformer,

•

Next, from the installation frames.

The IEC 364 (Section 3) Standard defines three types of grounding systems: TT, IT and TN-C or TN-S.

Codification of the Grounding Systems

Grounding systems are referred to by two or three letters for example:

•

1st letter—Status of the neutral of the transformer or source:

— I: Ungrounded

— T: Grounded

•

2nd letter—Status of the electrical frames of the loads:

— T: Grounded

— N: Connected to neutral

•

3rd letter—Status of the neutral (N) and the protective conductor (PE):

— S: N and PE are separate

— C: N and PE are in the same conductor (PEN)

The TT Grounded Neutral System

This “directly-grounded neutral” system is the easiest to install, monitor and use. Main features are:

•

The neutral point of the distribution transformer is directly grounded.

•

The installation frames are connected to several ground connections by the PE protective

conductor.

•

The frame and neutral ground connections are separate.

System characteristics upon installation:

•

Tripping is compulsory on the first fault.

•

Thus, at least one RCD is necessary at the incoming end of the installation.

•

If the load frames are not all connected to the same grounding connection, one RCD must be

installed for each set of equipment.

Figure 83: TT Grounding Systems

T N S

RCD

RCD RCD

PEPE

TT Grounding System with Residual Current

Device (RCD) at the Incoming End of the Installation

TT Grounding System with One Residual

Current Device (RCD) for Each Set of Equipment

08603271

™

Multi 9™ System Catalog

Section 8—Applications

The IT Grounding System

This “ungrounded neutral” system has the following main features:

•

The neutral point of the distribution transformer is ungrounded, or grounded by a high impedance.

•

The installation frames are connected to the same grounding connection by the PE protective

conductor.

System characteristics and constraints upon installation:

•

The appearance of the first insulation fault is risk-free for people.

•

The appearance of the second insulation fault is dangerous to people, and thus requires tripping.

•

If the application frames and the transformer frame are not all connected to the same ground

connection, an RCD must be placed at the incoming end of the installation.

•

The standard stipulates the installation of a Continuous Insulation Monitor (CIM) at the incoming

end of the installation.

The TN-S Grounding System

This “multiple-grounded neutral” system has the following main features:

•

The neutral point of the distribution transformer is grounded.

•

All installation frames are grounded by a PE protective conductor.

•

The PE protective conductors and the N neutral conductor are separate.

System characteristics and constraints upon installation:

•

Allows tripping on the first fault via an overcurrent protection device.

•

Use of an RCD, although not compulsory, is recommended.

•

Requires calculation, sometimes complex, of loop impedance.

•

Tripping of the protection devices must be checked when these devices are installed, B curve is

recommended.

NOTE: This grounding system is compulsory on premises where there is a risk of explosion.

Figure 84: IT Grounding Systems

Figure 85: TN-S Grounding System

CIM

RCD

CIM

IT Grounding System Without Residual Current Device (RCD) IT Grounding System With Residual Current

Device (RCD) at the Incoming End of the Installation

08603273

08603275

™

Multi 9™ System Catalog

Section 9—Time/Current Curves

11/2014

Section 9—Time/Current Curves

UL 489/CSA C22.2 No. 5 and UL 489A Listed C60 Miniature Circuit

Breakers

Figure 86: UL 489/CSA C22.2 No.5 Listed C60—C Curve

(0.5–35 A) AC & DC

Figure 87: UL 489/CSA C22.2 No.5 Listed C60—D Curve

(0.5–35 A) AC

Figure 88: UL 489/CSA C22.2 No.5 Listed C60—C Curve

(0.5–35 A) DC

™

Multi 9™ System Catalog

Section 9—Time/Current Curves

UL 1077 Recognized Supplementary Protectors

1Dotted Line is the tripping limit of a single pole of multi-pole device.

Figure 89: UL 1077 Recognized C60—B Curve Figure 90: UL 1077 Recognized C60—C Curve

Figure 91: UL 1077 Recognized C60—D Curve

™

Multi 9™ System Catalog

Section 9—Time/Current Curves

11/2014

IEC60947-2 Rated D PN-N Circuit Breakers

Table 82: DPNa/N

According to IEC/EN 6098 (Reference Temperature 30°C)

Curves B, C, D

™

Multi 9™ System Catalog

Section 9—Time/Current Curves

Alternative Current 50/60 Hz

Table 83: C60N/H/L

According to IEC/EN 60947-2 (Reference Temperature 50°C)

Curves B, C, D Rating up to 4 A Curves Z, K Rating up to 4 A

Curves B, C, D Rating 6 A to 63 A Curves Z, K Rating 6 A to 63 A

™

Multi 9™ System Catalog

Section 9—Time/Current Curves

11/2014

Motor Curve

Table 84: C60L-MA

According to IEC/EN 60947-2

Curve MA

™

Multi 9™ System Catalog

Section 10—Let-Through Curves

UL Listed C60 Miniature Circuit Breakers and UL Recognized C60

Supplementary Protectors

Figure 92: UL 489/CSA C22.2 No.5/489A Listed and UL

1077 Recognized C60 1P (240 Vac) Max Let-

Through Peak Current

Figure 93: UL 489/CSA C22.2 No.5/489A Listed and UL

1077 Recognized C60 1P (240 Vac) Max Let-

Through I

t Current

201087653210.2 0.80.60.50.40.3 4

kA RMS

6 A

10 A

25 A

40 A

63 A

08603207

™

Multi 9™ System Catalog

Section 10—Let-Through Curves

11/2014

Figure 94: UL 489/CSA C22.2 No.5 Listed and UL 1077

Recognized C60 2P, 3P, and 4P (240 Vac) Max

Let-Through Peak Current

Figure 95: UL 489/CSA C22.2 No.5 Listed and UL 1077

Recognized C60 2P, 3P, and 4P (240 Vac) Max

t Peak Current

™

Multi 9™ System Catalog

Section 10—Let-Through Curves

Figure 96: UL 489/CSA C22.2 No.5 Listed and UL 1077

Recognized C60 1P (277 Vac) Maximum Let-

Through Peak Current

Figure 97: UL 489/CSA C22.2 No.5 Listed and UL 1077

Recognized C60 1P (277 Vac) Maximum I

Peak Current

Figure 98: UL 1077 Recognized C60 2P, 3P, and 4P

(480Y/277 Vac) Maximum Let-Through Peak

Current

Figure 99: UL 1077 Recognized C60 2P, 3P, and 4P

(480Y/277 Vac) Maximum Let-Through I²t

Current

™

Multi 9™ System Catalog

Section 10—Let-Through Curves

11/2014

Figure 100: UL 1077 Recognized C60 2P, 3P, and 4P

(480 Vac) Maximum Let-Through Peak Current

Figure 101: UL 1077 Recognized C60 2P, 3P, and 4P

(480 Vac) Maximum Let-Through I²t Current

3210.2

0.2

0.3

0.4

0.5

0.6

0.8

0.3 0.4 0.5 0.6 0.8 4 5 6 7 8 10 20

kA RMS

Maximum Peak Current

6 A

10 A

20 A

08603459

106

105

104

103

201087653210.2 0.80.60.50.40.3 4

A2S

kA RMS

6 A

10 A

20 A

08603460

™

Multi 9™ System Catalog

Section 10—Let-Through Curves

Limitation curves

For 230 V single-phase or 400 V three-phase network (TN or TT earthing system.

Table 85: Limitation Curves—C60N

1P / 3P / 4P Circuit Breakers

Peak Currents Thermal Stress

1P+N / 2P Circuit Breakers

Peak Currents Thermal Stress

™

Multi 9™ System Catalog

Section 10—Let-Through Curves

11/2014

Table 86: Limitation Curves—C60H

1P / 3P / 4P Circuit Breakers

Peak Currents Thermal Stress

1P+N / 2P Circuit Breakers

Peak Currents Thermal Stress

™

Multi 9™ System Catalog

Section 10—Let-Through Curves

Table 87: Limitation Curves—C60L

1P / 3P / 4P Circuit Breakers

Peak Currents Thermal Stress

1P+N / 2P Circuit Breakers

Peak Currents Thermal Stress

™

Multi 9™ System Catalog

Index

Index of Part Numbers

Numerics

13934

13940

13944

13945

13947

13948

13956

13957

13958

13959

13960

13962

13963

13964

13965

13966

13967

13968

14210

14211

14881

14882

14886

14891

14893

15005

15006

15007

15008

15009

15010

15102

15103

15129

15440

15443

17400

18030

18031

18032

18033

18034

18035

18036

18037

18038

18039

18320

–

18321

18322

18323

18324

18325

18326

18330

18333

18334

18335

18401

18402

18403

18404

18412

18413

18414

18415

18423

18424

18425

18426

18434

18435

18436

18437

18445

18456

18457

18458

18459

18467

18468

18469

18470

18478

18479

18480

18481

18489

18490

18491

18492

18500

18501

18502

18503

18511

18512

18513

18514

18522

18523

18524

18525

18556

18557

18558

18559

18560

18561

18591

–

18592

18593

18594

18595

18596

18597

18598

18599

26923

26924

26927

26970

26975

26976

26978

26981

26982

26996

27001

27046

27047

27048

27062

27105

27106

27107

27108

27109

27110

27118

27145

27152

60100

60101

60102

60103

60104

60105

60106

60107

60108

60109

60110

60111

60112

60113

60114

60115

60116

60117

60118

60119

60120

60121

60122

60123

60124

60125

60126

60127

60128

60129

60130

60131

60132

60133

60134

60135

60136

60137

60138

60139

60140

60141

60142

60143

60144

60145

60146

60147

60148

60149

60150

60151

60152

60153

60154

60155

60156

60157

60158

60159

60160

60161

60162

60163

60164

60165

60166

60167

60168

60169

60170

60171

60172

60173

60174

60175

60176

60177

60178

60179

60180

60181

60182

60183

60184

60185

60186

60187

60188

60189

60190

60191

60192

60193

60194

60195

60196

60197

60198

60199

60200

60201

60202

60203

60204

60205

60206

60207

60208

60209

60210

60211

60212

60213

60214

60215

60216

60217

60218

60219

60220

60221

60222

60223

60224

60225

60226

60227

60228

60229

60230

60231

60232

60233

60234

60235

60236

60237

60238

60239

60240

60241

60242

60243

60244

60245

60246

60247

60248

60249

60250

60251

60252

60253

60254

60255

60256

60257

60258

60259

60260

™

Multi 9™ System Catalog

Index

11/2014

60261

60262

60263

60264

60265

60266

60267

60268

60269

60270

60271

60272

60273

60274

60275

60276

60277

60278

60279

60280

60281

60282

60283

60284

60285

60286

60287

60288

60289

60290

60291

60292

60293

60294

60295

60296

60297

60298

60299

60488

60949

60950

60951

60952

60954

60955

60969

60971

60972

60989

60990

60991

60992

60993

60995

60996

60999

83992

83993

83994

83995

83996

83997

AB1GA

AB1GB

AB1GC

AB1GD

AB1GE

AB1GF

AB1GG

AB1GH

AB1GI

AB1GJ

AB1GK

AB1GL

AB1GM

AB1GN

AB1GO

AB1GP

AB1GQ

AB1GR

AB1GS

AB1GT

AB1GU

AB1GV

AB1GW

AB1GX

AB1GY

AB1GZ

AB1R0

AB1R1

AB1R11

AB1R12

AB1R13

AB1R2

AB1R3

AB1R4

AB1R5

AB1R6

AB1R7

AB1R8

AB1R9

AB1RV

M9PF4

MG10285

MG10286

MG10287

MG12279

MG14885

MG14892

MG17402

MG17403

MG17404

MG17405

MG17406

MG17407

MG17408

MG17409

MG17411

MG17412

MG17413

MG17414

MG17415

MG17416

MG17417

MG17418

MG17419

MG17421

MG17422

MG17423

MG17424

MG17425

MG17426

MG17427

MG17428

MG17429

MG17432

MG17433

MG17434

MG17435

MG17436

MG17437

MG17438

MG17439

MG17442

MG17443

MG17444

MG17445

MG17446

MG17447

MG17448

MG17449

MG17452

MG17453

MG17454

MG17455

MG17456

MG17457

MG17458

MG17459

MG17461

MG17462

MG17463

MG17464

MG17466

MG17467

MG17468

MG17469

MG17471

MG17472

MG17473

MG17474

MG24110

MG24111

MG24112

MG24113

MG24114

MG24115

MG24116

MG24117

MG24118

MG24119

MG24121

MG24122

MG24123

MG24124

MG24125

MG24126

MG24127

MG24128

MG24129

MG24130

MG24131

MG24132

MG24133

MG24134

MG24136

MG24137

MG24138

MG24139

MG24140

MG24141

MG24142

MG24143

MG24144

MG24145

MG24146

MG24147

MG24148

MG24149

MG24150

MG24151

MG24152

MG24153

MG24154

MG24155

MG24156

MG24157

MG24158

MG24159

MG24160

MG24161

MG24162

MG24163

MG24164

MG24165

MG24166

MG24167

MG24168

MG24169

MG24425

MG24426

MG24427

MG24428

MG24430

MG24431

MG24432

MG24433

MG24434

MG24435

MG24436

MG24437

MG24438

MG24439

MG24440

MG24442

MG24443

MG24444

MG24445

MG24447

MG24448

MG24449

MG24450

MG24451

MG24452

MG24453

MG24454

MG24455

MG24456

MG24457

MG24459

MG24460

MG24461

MG24462

MG24464

MG24465

MG24466

MG24467

MG24468

MG24469

MG24470

MG24471

MG24472

MG24473

MG24474

MG24476

MG24477

MG24478

MG24481

MG24482

MG24483

MG24484

MG24485

MG24486

MG24487

MG24488

MG24489

MG24490

MG24491

MG24500

MG24501

MG24502

MG24503

MG24504

MG24505

MG24506

MG24507

MG24508

MG24509

MG24510

MG24511

MG24512

MG24513

MG24514

MG24516

MG24517

MG24518

MG24519

MG24520

MG24521

MG24522

MG24523

MG24524

MG24525

MG24526

MG24527

™

Multi 9™ System Catalog

Index

11/2014

MG24528

MG24529

MG24530

MG24532

MG24533

MG24534

MG24535

MG24536

MG24537

MG24538

MG24539

MG24540

MG24541

MG24542

MG24543

MG24544

MG24545

MG24546

MG24548

MG24549

MG24550

MG24551

MG24552

MG24553

MG24554

MG24555

MG24556

MG24557

MG24558

MG24559

MG24560

MG24561

MG24562

MG26925

MG26928

MG26970

MG26975

MG26976

MG26978

MG26983

MG26984

MG26985

MG26986

MG26987

MG26988

MG26989

MG26990

MG26996

MG27001

MG27046

MG27047

MG27048

MG27062

MG27124

MG27145

MGN61300

MGN61301

MGN61302

MGN61303

MGN61304

MGN61305

MGN61306

MGN61307

MGN61308

MGN61309

MGN61310

MGN61311

MGN61312

MGN61313

MGN61314

MGN61315

MGN61316

MGN61317

MGN61318

MGN61319

MGN61320

MGN61321

MGN61323

MGN61324

MGN61325

MGN61326

MGN61327

MGN61328

MGN61329

MGN61330

MGN61331

MGN61332

MGN61333

MGN61334

MGN61335

MGN61336

MGN61337

MGN61338

MGN61339

MGN61340

MGN613400

MGN613401

MGN613402

MGN613403

MGN613404

MGN613405

MGN613406

MGN613407

MGN613408

MGN613409

MGN61341

MGN613410

MGN613411

MGN613412

MGN613413

MGN613414

MGN613415

MGN613416

MGN613417

MGN613418

MGN613419

MGN61342

MGN613420

MGN613422

MGN613423

MGN613424

MGN613425

MGN613426

MGN613427

MGN613428

MGN613429

MGN61343

MGN613430

MGN613431

MGN61344

MGN61345

MGN61346

MGN61347

MGN61348

MGN61349

MGN61350

MGN61351

MGN61352

MGN61353

MGN61354

MGN61356

MGN61357

MGN61358

MGN61359

MGN61360

MGN61361

MGN61362

MGN61363

MGN61364

MGN61365

MGN61366

MGN61367

MGN61368

MGN61369

MGN61370

MGN61371

MGN61372

MGN61373

MGN61374

MGN61375

MGN61376

MGN61377

MGN61378

MGN61379

MGN61380

MGN61381

MGN61382

MGN61383

MGN61384

MGN61385

MGN61386

MGN61387

MGN61389

MGN61390

MGN61391

MGN61392

MGN61393

MGN61394

MGN61395

MGN61396

MGN61397

MGN61398

MGN61399

US11220018

US12420018

US13620018

US14820018

US16020018

US21215018

US22420018

US23620018

US24820018

US26020018

US31220018

US32420018

US33620018

US34820018

US36020018

Schneider Electric USA, Inc.

800 Federal Street

Andover, MA 01810 USA

888-778-2733

www.schneider-electric.us

Schneider Electric Canada, Inc.

5985 McLaughlin Road

Mississauga, ON L5R 1B8 Canada

800-565-6699

www.schneider-electric.ca

Schneider Electric, Square D, and Multi 9 are trademarks owned by Schneider

Electric Industries SAS or its affiliated companies. All other trademarks are the

property of their respective ow ners.

Schneider Electric, Square D et Multi 9 sont des marques commerciales de

Schneider Electric Industries SAS ou de ses compagnies affiliées. Toutes les

autres marques commerciales utilisées dans ce document sont la propriété de

leurs propriétaires respectifs.

0860CT0201 R11/14 Replaces / Remplace Replaces 0860CT0201 R07/14

11/2014

115905 Catalog

Navigation menu

Versions of this User Manual:

Views

Navigation