Cree LR4E Series Installation Instructions: LED Light Engine 117061 Catalog
101362-Catalog 101362-Catalog 101362-Catalog 883778 Batch6 unilog cesco-content 3:
101362-Catalog 101362-Catalog 101362-Catalog 783585 Batch6 unilog cesco-content 3:
234887-Catalog 234887-Catalog 234887-Catalog 883778 Batch1 unilog cesco-content 3:
2014-07-30
: Pdf 117061-Catalog 117061-Catalog 783585 Batch6 unilog
Open the PDF directly: View PDF 
.
Page Count: 892
| Download | |
| Open PDF In Browser | View PDF |
Catalog 2013
W I R I N G
D E V I C E - K E L L E M S
When reliability and performance matter
HUBBELL
For more than a century,
Hubbell Wiring Device-Kellems
has offered distributors,
end-user customers and
specifers the electrical and
electronic wiring devices, wire
SAFETY
INSTALLATION
EFFICIENCY
Ensuring the safety of people and
equipment while still effectively
delivering power and technology is
priority number one, which is why
Hubbell products provide essential
protection against injury and the
dangers of electricity.
The labor-saving enhancements of
Hubbell products keep renovation,
modernization, and new construction
projects on schedule and allow
contractors to complete more jobs in
a smaller amount of time.
• Twist-Lock Devices
• Hubbell SNAPConnect® Receptacles
• Motor Disconnects
• Tamper-Resistant Receptacles
• Hubbell SystemOne Floor Boxes
and Fire-Rated Poke-Throughs
• Watertight Devices
• Pre-Wired Raceway
• GFCI and Isolated Ground Receptacles
• Pre-Wired Work Box
• Pin and Sleeve Devices
• Wireless Sensor
management systems, and
specialized wiring products and
solutions needed for industrial,
institutional, commercial, and
residential markets.
Not only do Hubbell products
and solutions make it easy
to save time and money
while ensuring consistency
during installation – but
they’re also designed with
safety and energy efficiency
as top priorities.
II
®
Wiring Device-Kellems
www.hubbell-wiring.com
ENERGY
EFFICIENCY
DELIVERY
DATACOM
Hubbell products are innovatively
designed to maximize energy efficiency,
reduce costs, and ultimately lead to a
lower total cost of ownership.
Delivery systems from Hubbell offer
safe and effective routing, management,
delivery, and protection of a wide range
of power, data, and AV solutions.
Hubbell’s datacom solutions make up
the most comprehensive product line
available for commercial, institutional,
and government applications,
combining safety, efficiency,
and cost savings.
• H-MOSS® Ceiling and Wall Sensors
• Floor Boxes
• Modular Jacks
• Wireless Sensors
• Fire-Rated Poke-Throughs
• Audio/Video Keystone Connectors
• Hi-Bay Sensors
• Surface Raceway
• HDMI Connectors
• USB Receptacle
• Wall Duct
• Hubbell iSTATION Modules and Plates
• FPTV Box
• Network Enclosures
• Pre-Wired Work Box
• Network Modules
• Table Top box
www.hubbell-wiring.com
®
Wiring Device-Kellems
III
Table of Contents – Sections Overview
A Straight Blade Devices
H Single Pole Devices and Temporary Power
• Heavy Duty Industrial Receptacles
• SNAPConnect® Receptacles
• Hubbell-PRO HD Specification Grade
• USB Receptacles
• Insulgrip® Plugs and Connectors
B Twist-Lock® and Hubbellock® Devices
• 150A, Series 15 Single Pole Devices
• 300 & 400A, Series 16 Single Pole Devices
• Spider® II Temporary Power Boxes
• Portable Outlet Boxes and Plates
• Pre-Wired Portable Boxes
I Industrial Connectivity and Control Products
• Midget Twist-Lock Devices
• Twist-Lock® Devices
• Mechanical Interlock Switched Safety Enclosures
• 50A Twist-Lock® Devices
• Hubbellock® Devices
• LINKOSITY® Power Distribution System
• Mini-, Micro- & Nano-Quick Control Connectors
• CableTrak® Hose and Cable Carrier System
• PANEL-SAFE® Power & Data Access Ports
• HI-Impact Industrial Ethernet
®
C Watertight Devices
J Cable, Cord and Hose Reels
• 15A and 20A, Straight Blade Devices
• 15A, 20A and 30A, Twist-Lock® Devices
• Portable Outlet Boxes and Covers
• Heavy Duty Portable Outlet Boxes & Plates
D Switches
• Weatherproof Cable Reels
• Industrial Power Cord Reels
• Lighted Cord Reels
• Commercial Cord Reels
• Air/Water Hose and Static Discharge Reels
K Ground Fault Products
• SNAPConnect® Switches
• Heavy Duty Industrial Grade Switches
• Hubbell-PRO Heavy Duty Industrial Series
• Specification Grade Commercial Series
• Style Line® Decorator Series Specification Grade
E H-MOSS® Controls
• Industrial Tamper-Resistant Series
• Commercial LED Series
• Pre-Wired/Leaded LED Series
• SNAPConnect® GFCI Series
• GFCI Sensing Module
• GFCI Portable Products
L Hospital Products
• Wireless Sensors and Controls
• Wall Switches
• Ceiling Sensors
• OPTIMYZER® High Bay Controls
• H-MOSS®|MAXX™ Occupancy Sensors
F Switched Disconnects and Enclosures
• Heavy Duty Hospital Grade Receptacles
• Hospital Grade Plugs and Connectors
• USB Receptacles
• Hospital Grade GFCIs
• Hubbellock® Devices
M SpikeShield® Power Quality Products
• Circuit-Lock® Unfused Disconnects
• MotorQuick® Products
• Circuit-Lock® Fused Disconnects
• Hazardous Locations Devices
• AC Manual Toggle Controllers/Disconnects
G Pin and Sleeve Devices/Mechanical Interlocks
• Service/Branch Panel Protection
• Surge Protection Plug Strips
• Surge Protection Receptacles
• Surge Protection Strips & Receptacles
• Isolated Ground Devices
N Wallplates and Covers
• IEC Pin and Sleeve Watertight Devices
• Low Profile Pin and Sleeve Devices
• Mechanical Interlocks
• Insulgrip® Pin and Sleeve Devices
• Hazardous Locations Devices
IV
®
Wiring Device-Kellems
• Nylon and Metal Wallplates
• Pre-Marked Wallplates
• Security Wallplates
• Weatherproof Plates
• Heavy Duty Weatherproof Covers
www.hubbell-wiring.com
O Floor Boxes
V Wire Management Products
• Hubbell SystemOne Floor Boxes
• Flush Round and Rectangular Floor Boxes
• Convention Center Utility Box
• CONNEXION Zone Distribution System
• Furniture Connectivity Boxes
P Fire-Rated Poke-Through (FRPT) Devices
• Pulling Grips and Support Grips
• Fiber Optic Cable Grips
• Strain Relief for Flexible Cords
• Cord Connectors
• Non-Metallic Liquidtight Conduit and Tubing
W Network Wiring and netSELECT® Products
• Hubbell SystemOne Recessed Systems
• Hubbell SystemOne FRPT
• 2X2 Flush FRPT
• Flush Duplex FRPT
• Flush Furniture Feed FRPT
• Painted or Brushed Aluminum Pedestal FRPT
Q Aluminum Service Poles
• Jacks and Connectors
• Hubbell iSTATION Products
• In-Wall AV Delivery
• HDMI Connectors
• Molded-In Voice/Data/Video
X tradeSELECT® Products
• Aluminum Series Offering
• Specifications and Dimensional Information
• Custom Pole Configurations
R Metal and Non-Metallic Raceway
• Decorator Products
• Switches and Receptacles
• USB Receptacles
• Lighting Controls
• Power Delivery
Y Marine Products
• Metal Raceway and PlugTrak®
• Aluminum Raceway and PlugTrak®
• Non-Metallic Raceway and PlugTrak®
• Pre-Wired Raceway
S Trench and Wall Duct Products
• ELCI Interface Solutions
• 30A and 50A Cable Sets
• 100A and 200A Cable Sets
• Internationally Rated Devices
• Telephone and Cable TV Devices
• Ground Fault Devices
Z Other Wiring Products
• Key Features and Benefits
• HBL Trench Duct Series
• Hubbell Wall Duct Series
• Hubbell Duct Ordering Process
T Wire Basket Tray
• Adapters and Fluorescent Starters
• Lockout Devices and Circuit Tester
• Lampholders
• Lampholder Accessories
• Taps, Adapters, Plugs and Connectors
General Technical Data
• Key Features and Benefits
• Pre-Galvanized Wire Basket Trays
• Supports and Brackets
• Accessories
• Create a Bill of Material
U Hose and Cable Protection Systems
• AccessTrak® System
• TrukTrak® System
• TredTrak® System
• FloorTrak® System
www.hubbell-wiring.com
• Industry Standards
• Certification Agencies and Markings
• Codes and Standards Organizations
• NEMA and IEC Classifications
• Circuit Wiring Diagrams
Hubbell Configuration Charts (page VI-VII)
Catalog Number Index
®
Wiring Device-Kellems
V
NEMA Straight Blade Devices
HOW TO USE THIS CHART:
For quick reference, this chart shows the
configuration, primary catalog section and page
number where the devices are shown.
Catalog Section
and Page Number
Open Slots indicates
Receptacle / Connector Body
configurations (female).
Closed Slots indicates
Plug / Inlet configurations (male).
VI
®
{
NEMA
Configuration
A-3
A-7
A-16
C-6
Y-35
5-15R
IMPORTANT NOTICE:
The catalog pages referenced in BLUE are Insulgrip®,
Valise®, Safety-Shroud® and Watertight Safety-Shroud®
devices, in RED are Watertight devices, and in
ORANGE are Marine corrosion resistant devices
Wiring Device-Kellems
www.hubbell-wiring.com
NEMA Twist-Lock® Devices
www.hubbell-wiring.com
®
Wiring Device-Kellems
VII
Hubbell Wiring Device-Kellems
General Information
Industrial and Commercial Wiring Devices and Systems
Kellems Wire Management Products
Residential Products
Marine Products
RoHS
National Electrical
Manufacturers Association
NEMA promotes the
competitiveness of its
member companies by
providing a forum for the
development of technical
standards that are in
the best interests of the
industry and the users
of its products.
National Association of
Electrical Distributors
Restriction of
Hazardous Substances
Since 1908, NAED has
served as the trade
association for the
electrical distribution
industry.
To be an NAED associate
member, your company
must be a manufacturer
or value-added reseller.
The RoHS Directive stands
for “the restriction of the
use of certain hazardous
substances in electrical
and electronic equipment”.
U.S. Green Building
Council Member
International Organization
for Standardization
Hubbell is a US Green
Building Council (USGBC)
member dedicated to
advancing buildings
that are environmentally
responsible in the way
they are designed,
built and operated.
ISO (International
Organization for
Standardization) is the
world’s largest developer
and publisher of
International Standards.
Precautions have been taken to assure accuracy of the information in this catalog. Typographical or pictorial errors which are
brought to our attention will be corrected in subsequent issues.
Product dimensions in this catalog are nominal and are provided for the convenience of our customers. Hubbell reserves
the right to make product changes from time to time, without prior notification, which may change the dimensions shown.
We, therefore, recommend they be checked before using for customer projects or product development and specification.
The designs and dimensions of the products listed in this catalog, were correct at the date of publication and are subject to
change without notice.
All configuration diagrams shown in the various sections of the catalog are female devices (receptacles, connector bodies, etc.)
unless otherwise indicated.
No material will be accepted for return unless permission is granted in writing by this Company. All orders received for special
items and engraved plates are accepted as firm orders and are non-cancelable by the customer.
Claims for freight charges or allowances of any kind will not be considered after 30 days from receipt of goods and our
responsibility ceases when we have delivered such shipments to the carriers and hold their receipts.
The following trademarks of Hubbell Incorporated, are your assurance of the highest quality wiring devices
and wiring management products in the Industry.
• 4-PLEX®
• AccessTrak®
• ADD-A-SHROUD®
• AUTOGUARD®
• BaseTrak®
• CableTrak®
• CircuitGuard®
• Circuit-Lock®
• CircuitPro®
• Dua-Pull®
• Elastogrip®
• FloorTrak®
• Gotcha®
• Gripulator®
• HBL®
• H-MOSS®
• H-MOSS®IMAXX™
• Handi-Screw®
• Hubbell®
• Hubbell Juniors®
• Hubbellock®
• Hubbellnet®
• Insulgrip®
• Insulgrip Twist-Lock®
• JLOAD®
• Kellems®
• LANTrak®
• LINKOSITY®
• Micro-Quick®
• Mini-Quick®
• MotorQuick®
• Nano-Quick®
• netSELECT®
• NEXTSPEED®
• OPTIMYZER®
• OPTISOK®
• PANEL-SAFE®
• PLUG-CHECK®
• PLUGOUT®
• PlugTrak®
• PolyTrak®
• PolyTuff®
• PremiseTrak®
• PresSwitch®
• RACO®
• Safety-Shroud®
• ScrubShield®
• Seal-Tite®
• Signal-Quick®
• SNAPConnect®
• SPEEDGAIN®
• Spider®
• SpikeShield®
• Style Line®
• Super BaseTrak®
• Super Twist-Lock®
• SWITCHOUT®
• SwivelLok®
• tradeSELECT®
• TredTrak®
• TrukTrak®
• Twist-Lock®
• Valise®
• Variload®
• VARI-SIZE®
• WallTrak®
UPC Vendor Code No. 783585 - Hubbell Wiring Device-Kellems
CAGE No. 74545
©
2013 Hubbell Incorporated
VIII
®
Wiring Device-Kellems
www.hubbell-wiring.com
Section A
Straight Blade Devices
Index
Product
Page
®
HBL Extra Heavy Duty Hospital Grade Duplex Receptacles
Duplex and Style Line® Decorator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
SNAPConnect® Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
Hubbell-PRO Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
USB Charger, Single and 4-PLEX Receptacles . . . . . . . . . . . . . . . . . . . . . A-8
Plugs, Receptacles and Connector Bodies . . . . . . . . . . . . . . . . . . . . . . . . A-9
HBL® Extra Heavy Duty Industrial Series . . . . . . . . . . . . . . . . . . . . . . . . . . A-11
Extra Heavy Duty SNAPConnect® Receptacles . . . . . . . . . . . . . . . . . . . . A-14
Hubbell-PRO Heavy Duty Specification Grade Receptacles . . . . . . . . . . A-17
USB Charger Receptacle Tamper-Resistant Duplex . . . . . . . . . . . . . . . . A-18
Commercial Specification Grade Receptacles
4-PLEX® Receptacles and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . A-23
Pre-Fabricated Building Wiring System . . . . . . . . . . . . . . . . . . . . . . . . . . . A-24
Plugs and Connectors
Insulgrip®, Elastogrip® and Valise® Plugs and Connector Bodies . . . . . . A-28
Insulgrip® Flanged Inlets and Receptacles . . . . . . . . . . . . . . . . . . . . . . . A-30
HBL® Extra Heavy Duty, Specification Grade Receptacles . . . . . . . . . . A-31
Insulgrip® and Valise® Plugs and Flanged Inlets . . . . . . . . . . . . . . . . . . . . A-32
Insulgrip® and Valise® Connector Bodies and Flanged Receptacles . . . A-33
15 and 20A Plugs, Connector Bodies and Receptacles
16A, 250V AC International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-36
Hazardous Location Receptacles, Plugs and Boxes . . . . . . . . . . . . . . . . A-37
30, 50 and 60A Heavy Duty Insulgrip® Plugs and Receptacles
DIN Rail Utility Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-44
Miscellaneous and Combination Receptacles . . . . . . . . . . . . . . . . . . . . . A-45
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-46
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-50
HBL® Extra Heavy Duty
Industrial Series
SNAPConnect®
Receptacles
Commercial
Specification Grade
Insulgrip® Plugs and
Connectors
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-1
Straight Blade Devices
HBL® Extra Heavy Duty Hospital Grade Duplex Receptacles
Features and Benefits
One-piece nickel-plated brass
integral ground strap for greater
corrosion resistance
Barbed assembly arms reduce
possibility of face/base separation
Patented ground contact provides
redundant grounding
Back wired ground terminal
allows faster, easier installation
Unique bypass contact design
results in greater contact force
and reduced heat buildup
RTP base offers greater heat
resistance, plus contact stability
Square head, 10-thread bronze
center rivet won’t rotate, reduces
stripping and resists corrosion
External bundling terminals contain
wire strands and are designed for
quick inspection
I.D. marking surface provides
quick, sure circuit identification
Deep body design increases
impact and chemical resistance
HBL8200GY
Hubbell “Hospital Grade” Devices
To qualify for the “Hospital Grade” designation and use of the
associated green dot symbol, UL requires that the manufacturer
design its devices to perform to specific levels. These levels form
an established baseline below which no manufacturer can fall
and still carry a green dot.
Hubbell sets their standards high. Each product is built to
withstand the severe conditions of abuse that are unique to the
hospital environment. Hubbell receptacles have exclusive design
features that set them apart from the competition.
A-2
• Exclusive nickel-plated bypass contact design increases contact
pressure, lowering the operating temperature.
• Four point grounding system provides redundant grounding for
low resistance ground continuity in high abuse areas.
• High tech reinforced thermoplastic polyester (RTP) back is tough
and heat resistant.
Because of these features and others, the benefit is performance,
reliability, and value for any health care facility.
One piece, nickel plated brass mounting
strap with integral ground contacts, along
with secondary ground contact, provides
superior grounding for low resistance flow of
fault currents as well as corrosion resistance.
Barbed locking arms keep the face locked in
place to diminish potential for face/base
separation. Back wired ground screw
reduces installation time.
Exclusive bypass contacts are made of
nickel-plated brass alloy. This design
increases blade retention forces, insuring
a reliable uninterrupted flow of power.
Reinforced thermoplastic back provides
superior thermal, electrical and mechanical
properties. By providing contact stability,
this high performance material will reduce
heat buildup giving you long lasting
performance.
External wiring clamps allow for visual
inspection of the terminals. A unique
strand containment feature on the terminal
“bundles” the wire, ensuring 100%
clamping of wire strands and reducing
heat from the termination.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
IP20
SUITABILITY
HBL Extra Heavy Duty
Hospital Grade Receptacles
®
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Duplex
Description
Color
Catalog Number
Flush, thermoplastic polyester face,
back and side wired.
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
HBL8200BK
–
HBL8200
HBL8200GY
HBL8200I
HBL8200LA
HBL8200RED
HBL8200W
–
HBL8300BL
HBL8300
HBL8300GY
HBL8300I
HBL8300LA
HBL8300RED
HBL8300W
Flush, LED illuminated face,
back and side wired.
Gray
Ivory
Red
White
HBL8200ILGY
HBL8200ILI
HBL8200ILR
HBL8200ILW
HBL8300ILGY
HBL8300ILI
HBL8300ILR
HBL8300ILW
Tamper-Resistant receptacle
with wire leads. Complies with
requirements of NEC® article
517-18(c).
Brown
Gray
Ivory
Light Almond
Red
White
HBL8200SGA
HBL8200SGGYA
HBL8200SGIA
HBL8200SGLA
HBL8200SGRA
HBL8200SGWA
HBL8300SGA
HBL8300SGGYA
HBL8300SGIA
HBL8300SGLA
HBL8300SGRA
HBL8300SGWA
Isolated ground∆.
Orange
Red
IG8200
IG8200R
IG8300
IG8300R
HBL8200GY
HBL8300SGA
MRI Receptacle, Duplex
Description
Color
Catalog Number
MRI receptacle, flush, thermoplastic
polyester face, back and side wired.
Ivory
Light Almond
Red
White
HBL8200IMRI
HBL8200LAMRI
HBL8200RMRI
HBL8200WMRI
HBL8300IMRI
HBL8300LAMRI
HBL8300RMRI
HBL8300WMRI
Slender/Compact, Duplex
Description
Color
Catalog Number
Flush, thermoplastic polyester face,
back, and side wired,
Fed. Spec. verified.
Brown
Gray
Green
Ivory
Light Almond
Red
White
HBL8200H
HBL8200HG
–
HBL8200HI
HBL8200HLA
HBL8200HRED
HBL8200HW
HBL8300H
HBL8300HG
HBL8300HGN
HBL8300HI
HBL8300HLA
HBL8300HRED
HBL8300HW
HBL8300RMRI
Style Line® Decorator*
Description
Color
Catalog Number
Flush, nylon face,
back and side wired.
Brown
Gray
Ivory
Office White
Red
White
HBL2172
HBL2172GY
HBL2172I
–
HBL2172R
HBL2172WA
Isolated ground∆.
Ivory
Orange
White
HBL2182
HBL2182GY
HBL2182I
HBL2182OW
HBL2182R
HBL2182WA
–
–
–
IG2182I
IG2182
IG2182WA
Note: ∆See section M for additional information on isolated ground devices.
*Not Fed. Spec. Listed.
See page A-46 and A-47 for accessories.
See page A-50 for technical information.
See page Tech-10 for Tamper-Resistant description.
See section L for additional information on Hospital Grade products.
See section N for wallplates.
HBL2172
NEC is a registered trademark of the National Fire Protection Association (NFPA).
®
www.hubbell-wiring.com
HBL8200ILW
Dimensions in Inches (mm)
®
Wiring Device-Kellems
A-3
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
IP20
Extra Heavy Duty
Hospital Grade SNAPConnect®
SUITABILITY
1.56"
(39.7)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Duplex
Description
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP8300WA
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
Color
Black
Brown
Gray
Ivory
Light Almond
* For Assembled in USA receptacles drop off the Red
last “A” and add suffix NA. Ex: SNAP8200BKNA. White
SNAP8200BKA*
SNAP8200A*
SNAP8200GYA*
SNAP8200IA*
SNAP8200LAA*
SNAP8200RA*
SNAP8200WA*
SNAP8300BKA*
SNAP8300A*
SNAP8300GYA*
SNAP8300IA*
SNAP8300LAA*
SNAP8300RA*
SNAP8300WA*
Hospital grade, Tamper-Resistant,
smooth nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKTR
SNAP8200TR
SNAP8200GYTR
SNAP8200ITR
SNAP8200LATR
SNAP8200RTR
SNAP8200WTR
SNAP8300BKTR
SNAP8300TR
SNAP8300GYTR
SNAP8300ITR
SNAP8300LATR
SNAP8300RTR
SNAP8300WTR
Isolated ground∆, Hospital grade,
Tamper-Resistant.
Orange
Red
SNAP8200IGTR
SNAP8200RIGTR
SNAP8300IGTR
SNAP8300RIGTR
Hospital grade, with Power Indicating LED,
smooth nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKL
SNAP8200L
SNAP8200GYL
SNAP8200IL
SNAP8200LAL
SNAP8200RL
SNAP8200WL
SNAP8300BKL
SNAP8300L
SNAP8300GYL
SNAP8300IL
SNAP8300LAL
SNAP8300RL
SNAP8300WL
Isolated ground∆, Hospital grade,
with Power Indicating LED.
Orange
Red
SNAP8200IGL
SNAP8200RIGL
SNAP8300IGL
SNAP8300RIGL
Hospital grade, Tamper-Resistant,
with Power Indicating LED,
smooth nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKLTR
SNAP8200LTR
SNAP8200GYLTR
SNAP8200ILTR
SNAP8200LALTR
SNAP8200RLTR
SNAP8200WLTR
SNAP8300BKLTR
SNAP8300LTR
SNAP8300GYLTR
SNAP8300ILTR
SNAP8300LALTR
SNAP8300RLTR
SNAP8300WLTR
Isolated ground∆, Hospital grade,
TR with Power Indicating LED.
Orange
Red
SNAP8200IGLTR
SNAP8200RIGLTR
SNAP8300IGLTR
SNAP8300RIGLTR
Hospital grade, finder groove, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA*.
SNAP8300LATR
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP8300L
Catalog Number
Note: ∆See section M additional information on isolated ground devices.
See page A-14 for additional information on SNAPConnect® features.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See pages A-46 and A-47 for accessories.
See page A-54 for technical information.
See section N for wallplates.
Consult factory for available Split-Circuit capable SNAPConnect® devices.
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
SNAPConnect® Right Angle Pigtailed Connector
.86"
(21.9)
SNAP8300RLTR
.78"
(19.8)
1.48"
(37.6)
Description
Wire Type
General Use
Catalog Number
Assembled in USA
Catalog Number
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate
housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
Note: For Assembled in USA products, must order connector with NA suffix.
See page A-54 for technical information.
.63"
(16.0)
SNAP1RA
Many of these products are Assembled in USA, as indicated, and many are Buy
American Compliant. Please contact Hubbell with any certification requirements.
Dimensions in Inches (mm)
A-4
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
IP20
Extra Heavy Duty
Hospital Grade SNAPConnect®
SUITABILITY
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
1.64"
(41.7)
Style Line® Decorator
Description
Color
Catalog Number
Hospital grade, Style Line® decorator,
flush, nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA*.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKA*
SNAP2172A*
SNAP2172GYA*
SNAP2172IA*
SNAP2172LAA*
SNAP2172RA*
SNAP2172WA*
SNAP2182BKA*
SNAP2182A*
SNAP2182GYA*
SNAP2182IA*
SNAP2182LAA*
SNAP2182RA*
SNAP2182WA*
Hospital grade, Tamper-Resistant,
Style Line® decorator, flush, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKTR
SNAP2172TR
SNAP2172GYTR
SNAP2172ITR
SNAP2172LATR
SNAP2172RTR
SNAP2172WTR
SNAP2182BKTR
SNAP2182TR
SNAP2182GYTR
SNAP2182ITR
SNAP2182LATR
SNAP2182RTR
SNAP2182WTR
Isolated ground∆, Hospital grade,
Tamper-Resistant.
Orange
Red
SNAP2172IGTR
SNAP2172RIGTR
SNAP2182IGTR
SNAP2182RIGTR
Hospital grade, with Power Indicating LED,
Style Line® decorator, flush, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKL
SNAP2172L
SNAP2172GYL
SNAP2172IL
SNAP2172LAL
SNAP2172RL
SNAP2172WL
SNAP2182BKL
SNAP2182L
SNAP2182GYL
SNAP2182IL
SNAP2182LAL
SNAP2182RL
SNAP2182WL
Isolated ground∆, Hospital grade,
with Power Indicating LED.
Orange
Red
SNAP2172IGL
SNAP2172RIGL
SNAP2182IGL
SNAP2182RIGL
Hospital grade, Tamper-Resistant,
with Power Indicating LED,
Style Line® decorator, flush, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKLTR
SNAP2172LTR
SNAP2172GYLTR
SNAP2172ILTR
SNAP2172LALTR
SNAP2172RLTR
SNAP2172WLTR
SNAP2182BKLTR
SNAP2182LTR
SNAP2182GYLTR
SNAP2182ILTR
SNAP2182LALTR
SNAP2182RLTR
SNAP2182WLTR
Isolated ground∆, Hospital grade,
TR with Power Indicating LED.
Orange
Red
SNAP2172IGLTR
SNAP2172RIGLTR
SNAP2182IGLTR
SNAP2182RIGLTR
* For Assembled in USA receptacles drop off the
last “A” and add suffix NA. Ex: SNAP2172BKNA.
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP2182A
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP2182ITR
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP2182RL
Note: ∆See section M additional information on isolated ground devices.
See page A-14 for additional information on SNAPConnect® features.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See pages A-46 and A-47 for accessories.
See page A-54 for technical information.
See section N for wallplates.
Consult factory for available Split-Circuit capable SNAPConnect® devices.
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
SNAPConnect® Right Angle Pigtailed Connector
Description
Wire Type
General Use
Catalog Number
Assembled in USA
Catalog Number
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate
housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
.86"
(21.9)
SNAP2182GYLTR
.78"
(19.8)
Note: For Assembled in USA products, must order connector with NA suffix.
See page A-54 for technical information.
1.48"
(37.6)
.63"
(16.0)
Many of these products are Assembled in USA, as indicated, and many are Buy
American Compliant. Please contact Hubbell with any certification requirements.
SNAP1RA
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-5
Hospital Products
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Hubbell-PRO Features
Automatic self-grounding staple
Combination Tamper-Resistant and
LED for pediatric emergency circuits
Nylon face and base construction
Circuit ID marking area
Back and side wiring
Tri drive screws
Steel mounting strap
8200REDLTR
1.57"
(39.9)
Hubbell-PRO Heavy Duty
Hospital Grade Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Duplex
2.73"
(69.3)
3.28"
(83.3)
1.15"
(29.1)
Description
Color
Catalog Number
Hospital grade,
smooth nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
8200BK
8200
8200GY
8200IV
8200LA
8200RED
8200WHI
8300BK
8300
8300GY
8300IV
8300LA
8300RED
8300WHI
Hospital grade, Tamper-Resistant,
smooth nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
8200BKTR
8200TR
8200GYTR
8200IVTR
8200LATR
8200REDTR
8200WTR
8300BKTR
8300TR
8300GYTR
8300IVTR
8300LATR
8300REDTR
8300WTR
Hospital grade,
with Power Indicating LED,
smooth nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
8200BKL
8200L
8200GYL
8200IVL
8200LAL
8200REDL
8200WL
8300BKL
8300L
8300GYL
8300IVL
8300LALM
8300REDL
8300WL
Hospital grade, Tamper-Resistant,
with Power Indicating LED,
smooth nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
8200BKLTR
8200LTR
8200GYLTR
8200IVLTR
8200LALTR
8200REDLTR
8200WLTR
8300BKLTR
8300LTR
8300GYLTR
8300IVLTR
8300LALTR
8300REDLTR
8300WLTR
8200LA
1.57"
(39.9)
2.73"
(69.3)
3.28"
(83.3)
1.15"
(29.1)
8200TR
1.57"
(39.9)
3.28"
(83.3)
2.73"
(69.3)
1.15"
(29.1)
8200REDLTR
Dimensions in Inches (mm)
A-6
Note: See pages A-46 and A-47 for accessories.
See page A-55 for technical information.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See section N for wallplates.
The products listed on this page are Assembled in USA, and many are Buy American
Compliant. Please contact Hubbell with any certification requirements.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hospital Products
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Hubbell-PRO Features
Automatic self-grounding staple
Combination Tamper-Resistant and
LED for pediatric emergency circuits
Nylon face and base construction
Back and side wiring
Tri drive screws
Steel mounting strap
2182IVLTR
Hubbell-PRO Heavy Duty
Hospital Grade Receptacles
1.57"
(39.9)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Style Line® Decorator
Color
Catalog Number
Hospital grade,
Style Line® decorator,
flush, nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
2172BK
2172
2172GY
2172IV
2172LA
2172RED
2172W
2182BK
2182
2182GY
2182IV
2182LA
2182RED
2182W
Hospital grade, Tamper-Resistant,
Style Line® decorator,
flush, nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
2172BKTR
2172TR
2172GYTR
2172IVTR
2172LATR
2172REDTR
2172WTR
2182BKTR
2182TR
2182GYTR
2182IVTR
2182LATR
2182REDTR
2182WTR
Hospital grade,
with Power Indicating LED,
Style Line® decorator,
flush, nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
2172BKL
2172L
2172GYL
2172IVL
2172LAL
2172REDL
2172WL
2182BKL
2182L
2182GYL
2182IVL
2182LAL
2182REDL
2182WL
Hospital grade, Tamper-Resistant,
with Power Indicating LED,
Style Line® decorator,
flush, nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
2172BKLTR
2172LTR
2172GYLTR
2172IVLTR
2172LALTR
2172REDLTR
2172WLTR
2182BKLTR
2182LTR
2182GYLTR
2182IVLTR
2182LALTR
2182REDLTR
2182WLTR
Note: See pages A-46 and A-47 for accessories.
See page A-55 for technical information.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See section N for wallplates.
1.15"
(29.1)
2172LATR
1.57"
(39.9)
2.73"
(69.3)
3.28"
(83.3)
1.15"
(29.1)
2172L
1.57"
(39.9)
2.73"
(69.3)
3.28"
(83.3)
1.15"
(29.1)
The products listed on this page are Assembled in USA, and many are Buy American
Compliant. Please contact Hubbell with any certification requirements.
www.hubbell-wiring.com
2.73"
(69.3)
3.28"
(83.3)
Description
®
Wiring Device-Kellems
2182IVLTR
Dimensions in Inches (mm)
A-7
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
USB Charger Tamper-Resistant
Hospital Grade Receptacles
1.75"
(44.5)
3.28"
(83.3)
Color
15A 125V AC
20A 125V AC
USB Charger Tamper-Resistant receptacle,
Two USB Type 2.0 ports 3 Amp, 5 Volt DC,
15 or 20 Amp, 125 Volt AC decorator duplex
Black
Brown
Gray
Ivory
Light Almond
Red
White
USB8200BK
USB8200
USB8200GY
USB8200I
USB8200LA
USB8200R
USB8200W
USB8300BK
USB8300
USB8300GY
USB8300I
USB8300LA
USB8300R
USB8300W
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Note: See page A-18 for additional information on standard USB charger.
See page A-56 for technical information.
See page Tech-10 for Tamper-Resistant description.
USB8300W
1.63"
(41.4)
IP20
SUITABILITY
HBL Extra Heavy Duty
Hospital Grade
Single Receptacles
®
3.28"
(83.3)
20A 125V
NEMA 5-20R
UL CSA
1 HP
Description
2.62"
(66.5)
1.96"
(49.9)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
1.94"
(49.3)
1.19"
(30.2)
Description
Color
Catalog Number
Flush, nylon face,
back and side wired,
Fed. Spec. verified.
Almond
Brown
Gray
Ivory
Red
White
–
HBL8210
HBL8210GY
HBL8210I
HBL8210R
HBL8210W
HBL8310AL
HBL8310
HBL8310GY
HBL8310I
HBL8310R
HBL8310W
Panel mount on 1.94 in.
(49.2) centers.
Brown
Ivory
HBL8284
HBL8284I
–
HBL8384I
Isolated ground∆.
Orange
IG8210
IG8310
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
HBL8210GY
.92”
(23.4)
.1”
(2.5)
Note: ∆See section M for additional information on isolated ground devices.
4.30” sq.
(109.2)
4-PLEX®
Hospital Grade
3.02” (76.7)
3.38” (85.9)
HBL415HI
.38" (9.7)
3.28"
(83.3)
4.78"
(121.4)
.19" (4.8)
Receptacles
Description
Color
Catalog Number
4 outlet high impact resistant
Polycarbonate construction.
Mount to 4 in. square box.
Brown
Gray
Ivory
Red
White
HBL415H
−
HBL415HI
HBL415HR
HBL415HW
HBL420H
HBL420HGY
HBL420HI
HBL420HR
HBL420HW
4-PLEX adapter plates for
1- and 2-gang, device boxes.
Brown
Gray
Ivory
Red
White
HBL4AP
HBL4APGY
HBL4API
HBL4APR
HBL4APW
HBL4AP
HBL4APGY
HBL4API
HBL4APR
HBL4APW
2.75"
(69.9)
Note: See page A-23 for additional information on 4-PLEX devices.
See page A-60 for technical information.
4-PLEX devices are not Fed. Spec. Listed.
1.75"
(44.5 )
3.38"sq. (85.9)
HBL4API
Dimensions in Inches (mm)
A-8
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
IP20
G
G
W
W
SUITABILITY
Hospital Grade
Insulgrip
15A 125V
NEMA 5-15P
UL CSA
Plugs
20A 125V
NEMA 5-20P
UL CSA
®
Description
Cord Diameter
Catalog Number
Black and white nylon.
.230"-.720" (5.8-18.3)
HBL8215C
Transparent housing.
.230"-.720" (5.8-18.3)
HBL8215CT
HBL8315CT
8 position angle plug,
transparent housing.
.250"-.655" (6.4-16.6)
HBL8215CAT*
HBL8315CAT*
Description
Cord Diameter
Catalog Number
White nylon.
.300"-.660" (7.6-16.8)
HBL8115V
HBL8364V
Insulation displacement,
white nylon.
.300"-.360" (7.6-9.1)
HBL8013V*
−
HBL8315C
HBL8215C
Valise®
Note: *Not Fed. Spec. Listed.
See page A-47 for accessories.
IP20
SUITABILITY
Hospital Grade
Connector Bodies
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
HBL8115V
Insulgrip®
Description
Cord Diameter
Catalog Number
Black and white nylon.
.230"-.720" (5.8-18.3)
HBL8219C
HBL8319C
Transparent housing.
.230"-.720" (5.8-18.3)
HBL8219CT
HBL8319CT
Valise
®
Description
Cord Diameter
Catalog Number
White nylon.
.300"-.660" (7.6-16.8)
HBL8119V
–
HBL8219C
Note: See page A-47 for accessories.
HBL8219CT
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-9
Straight Blade Devices
15 and 20 Ampere, 250 Volts
2 Pole, 3 Wire Grounding
G
G
IP20
SUITABILITY
Hospital Grade
Valise
HBL8666V
15A 250V
NEMA 6-15P
UL CSA
1.5 HP
Plugs
20A 250V
NEMA 6-20P
UL CSA
2 HP
®
Description
Cord Diameter
Catalog Number
Valise plug, white nylon.
.300"-.660" (7.6-16.8)
HBL8666V
HBL8464V
Note: HP ratings listed above are based on 208 to 240V AC only.
G
Hospital Grade
G
15A 250V
NEMA 6-15R
UL CSA
1.5 HP
Receptacles
20A 250V
NEMA 6-20R
UL CSA
2 HP
HBL Extra Heavy Duty, Duplex
®
Description
Color
Catalog Number
Flush, thermoplastic polyester
face, back and side wired.
Brown
Ivory
HBL8600
HBL8600I
HBL8400
HBL8400I
Note: See page A-46 for accessories.
See section N for wallplates.
HBL8600I
G
Hospital Grade
Connector Bodies
20A 250V
NEMA 6-20R
UL CSA
2 HP
Valise®
Description
Cord Diameter
Catalog Number
White nylon.
.300"-.660" (7.6-16.8)
HBL8469V
HBL8469V
Dimensions in Inches (mm)
A-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
HBL® Extra Heavy Duty Industrial Series
Features and Benefits
One-piece brass integral
ground strap for low resistance
of fault currents
Barbed assembly arms reduce
possibility of face/base separation
Ground retention clips for longer,
more consistent contact pressure
Back wired ground terminal
allows faster, easier installation
Exclusive bypass contact design
results in greater contact force
and reduced heat buildup
RTP base offers greater heat
resistance, plus contact stability
Square head, 10-thread brass
center rivet won’t rotate, reduces
stripping and resists corrosion
External bundling terminals contain
wire strands and are designed for
quick inspection
I.D. marking surface provides
quick, sure circuit identification
Deep nylon body design delivers
increased impact resistance
HBL5262
Quality in Design
Hubbell’s commitment to quality continually reinforces a philosophy
of unrivaled performance. No Hubbell device exemplifies this
philosophy more than the HBL5262. While all Hubbell receptacles
are designed and manufactured to withstand even the harshest
environments, none match the total performance of the HBL5262.
Whether in a factory, office building, school, hotel or shopping
center, the Hubbell HBL5262 is the receptacle of choice when
people are depending on the safety and reliability of a receptacle.
One piece, all brass, mounting strap with
integral ground contacts. The safest, most
reliable design for a low resistance flow of
fault currents. Oversized “bell" shaped ground
contacts, along with nickel plated steel
retaining shields, help minimize damage to
the grounding system during abrupt pullout.
Barbed brass locking arms keep the face
locked in place to diminish potential for face/
base separation. Back wired ground terminal
reduces installation time and increases
convenience.
The patented “bypass" contact design
incorporates high-conductivity materials
with superior spring characteristics for
increased contact force and secure
connections. Improved contact
performance reduces heat buildup
and ensures a reliable, uninterrupted
flow of power.
Reinforced thermoplastic base provides
superior thermal, electrical and mechanical
properties. By providing contact stability,
this high tech material will reduce heat buildup,
giving you long lasting performance.
External wiring clamps feature large head
brass screws (#10) for superior torque
values. Visible brass terminal screws and
clamps, with a unique strand containment
feature, ensure 100% clamping of wire
strands, reducing heat build up.
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-11
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
HBL® Extra Heavy Duty,
Specification Grade, Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Duplex
1.65"
(41.9)
Description
Color
Catalog Number
Flush, nylon face,
back and side wired.
Black
Blue
Brown
Gray
Ivory
Red
White
HBL5262BK
–
HBL5262
HBL5262GY
HBL5262I
HBL5262R
HBL5262W
HBL5362BK
HBL5362BL
HBL5362
HBL5362GY
HBL5362I
HBL5362R
HBL5362W
Isolated ground∆.
Gray
Ivory
Orange
Red
White
IG5262GY
IG5262I
IG5262
IG5262R
–
IG5362GY
IG5362I
IG5362
IG5362R
IG5362W
Non-isolated ground,
bulk pack of 100.
Orange
–
Weather Resistant,
flush, nylon face,
back and side wired.
Black
Brown
Gray
Ivory
Red
White
HBL5262BKWR
HBL5262WR
HBL5262GYWR
HBL5262IWR
HBL5262RWR
HBL5262WWR
HBL5362BKWR
HBL5362WR
HBL5362GYWR
HBL5362IWR
HBL5362RWR
HBL5362WWR
Corrosion resistant.
Ivory
Yellow
HBL52CM62I
HBL52CM62
–
HBL53CM62
Weather Resistant,
Isolated ground∆.
Gray
Ivory
Orange
Red
White
IG5262GYWR
IG5262IWR
IG5262WR
IG5262RWR
–
IG5362GYWR
IG5362IWR
IG5362WR
IG5362RWR
IG5362WWR
On 4 in. (101.6) round cover.
Brown
HBL5282
Description
Color
Catalog Number
Flush, nylon face,
back and side wired.
Black
Brown
Gray
Ivory
White
HBL5261BK
HBL5261
–
HBL5261I
–
HBL5361BK
HBL5361
HBL5361GRY
HBL5361I
HBL5361W
Isolated ground∆.
Orange
IG5261
IG5361
Weather Resistant,
Isolated ground∆.
Orange
IG5261WR
IG5361WR
Ring terminal connection.
Brown
White
Yellow
HBL5261RT
HBL5261WRT
HBL5261YRT
HBL5361RT
–
–
Weather Resistant,
flush, nylon face,
back and side wired.
Brown
Gray
Ivory
HBL5261WR
HBL5261GRYWR
HBL5261IWR
HBL5361WR
HBL5361GRYWR
HBL5361IWR
Corrosion resistant.
Yellow
HBL52CM61
HBL53CM61
Panel mount on 1.94 in.
(49.3) centers.
Brown
HBL5284
HBL5357
2.72"
(69.1)
3.28"
(83.3)
.96"
(24.4)
HBL5262
1.65"
(41.9)
2.72"
(69.1)
3.28"
(83.3)
.96"
(24.4)
HBL5362IWR
1.39"
(35.3)
#6-32
TAP
.94"
(23.9)
HBL5261
1.94" 1.39"
(49.3) (35.3)
1.63"
(41.4)
–
Single
1.13"
(28.7)
3.28" 1.94"
(83.3) (49.3)
HBL5362M4
.86"
(21.8)
HBL5284
Note: ∆See section M for additional information on isolated ground devices..
See pages A-46 and A-47 for accessories.
See page Tech-10 for Weather Resistant descriptions.
See section N for wallplates.
Dimensions in Inches (mm)
A-12
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
HBL® Extra Heavy Duty
Compact Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
1.33"
(33.8)
Duplex
Description
Color
Catalog Number
Flush, nylon face,
back and side wired.
Black
Blue
Brown
Gray
Ivory
Red
White
HBL5252BK
–
HBL5252
HBL5252GY
HBL5252I
HBL5252R
HBL5252W
Brown
HBL5253
On a 4 in. (101.6) round cover.
HBL5352BK
HBL5352BL
HBL5352
HBL5352GY
HBL5352I
HBL5352R
HBL5352W
3.28"
(83.3)
2.73"
(69.3)
.80"
(20.3)
HBL5252
–
1.33"
(33.8)
Duplex
Description
Color
Catalog Number
Flush, nylon face,
side wired only.
Brown
Gray
Ivory
White
HBL5242
HBL5242GY
HBL5242I
HBL5242W
HBL5342
HBL5342GY
HBL5342I
HBL5342W
Ring terminal connection.
Brown
HBL5242RT
HBL5342RT
2.73"
(69.3)
3.28"
(83.3)
.80"
(20.3)
Single
HBL5242
Description
Color
Catalog Number
Flush, side wired only.
Brown
Ivory
HBL5251
HBL5251I
Panel mount 1.75 in.
(44.5) centers.
Brown
Ivory
HBL5258
HBL5258I
–
–
HBL5358
–
3.28" 1.39"
(83.3) (35.3)
Style Line® Decorator*
Description
Color
Catalog Number
Flush, nylon face,
back and side wired.
Almond
Black
Brown
Gray
Ivory
Office White
White
HBL2152AL
HBL2152BK
HBL2152
HBL2152GY
HBL2152I
HBL2152OW
HBL2152WA
HBL2162AL
HBL2162BK
HBL2162
HBL2162GY
HBL2162I
HBL2162OW
HBL2162WA
Gray
Orange
–
IG2152
IG2162GY
IG2162
Isolated ground∆.
Note: ∆See section M for additional information on isolated ground devices.
*Style Line Duplex devices are not Fed. Spec. Listed.
See page A-46 for accessories.
See section N for wallplates.
.92"
(23.3)
HBL5251
1.47"
(37.3)
1.75" 1.39"
(44.5) (35.3)
1.13"
(28.7)
#8-32
TAP
HBL5258
1.36"
(34.5)
2.75"
(69.9)
3.28"
(83.3)
.80"
(20.3)
HBL2152
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-13
Straight Blade Devices
Extra Heavy Duty SNAPConnect® Receptacles
Features and Benefits
No Special Tester Required
.085 inch keyhole accepts
the probe points found on the
most common voltage testers
and digital multi-meters
Installation ease
• Self-grounding clip
Requires minimal box space
• Compact size
• Clean finished look
Audible SNAP, indicates
solid connection
• Secure, easy grip latch
Inspection of power contacts
• Clear terminal housing
• No exposed metal
SNAP1RA
SNAP5362IA
Many of these products are Assembled in USA, as indicated, and many are Buy American Compliant.
Please contact Hubbell with any certification requirements.
Labor Savings Feature!
Save one Minute!
Save Over Three Minutes!
Rough-in the SNAPConnect®
terminal instead of pigtails.
Remove protective packaging
and SNAPConnect® device to
the circuit.
A-14
®
Wiring Device-Kellems
Complete Trim-Out
in Less Than One Minute!
Secure mounting screws, attach
wallplate, job complete.
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Extra Heavy Duty
SNAPConnect® Receptacles
1.56"
(39.7)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Duplex
Color
Catalog Number
Specification grade, finder groove,
nylon face, modular receptacle which
requires pigtailed connector below.
Assembled in USA*.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP5262BKA*
SNAP5262A*
SNAP5262GYA*
SNAP5262IA*
SNAP5262LAA*
SNAP5262RA*
SNAP5262WA*
SNAP5362BKA*
SNAP5362A*
SNAP5362GYA*
SNAP5362IA*
SNAP5362LAA*
SNAP5362RA*
SNAP5362WA*
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
SNAP5262BKTR
SNAP5262BLTR
SNAP5262TR
SNAP5262GYTR
SNAP5262ITR
SNAP5262LATR
SNAP5262RTR
SNAP5262WTR
SNAP5362BKTR
SNAP5362BLTR
SNAP5362TR
SNAP5362GYTR
SNAP5362ITR
SNAP5362LATR
SNAP5362RTR
SNAP5362WTR
Isolated ground∆, Specification grade,
Tamper-Resistant.
Orange
SNAP5262IGTR
SNAP5362IGTR
Specification grade, with Power Indicating LED,
smooth nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA.
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
SNAP5262BKL
SNAP5262BLL
SNAP5262L
SNAP5262GYL
SNAP5262IL
SNAP5262LAL
SNAP5262RL
SNAP5262WL
SNAP5362BKL
SNAP5362BLL
SNAP5362L
SNAP5362GYL
SNAP5362IL
SNAP5362LAL
SNAP5362RL
SNAP5362WL
Isolated ground∆, Specification grade,
with Power Indicating LED.
Orange
SNAP5262IGL
SNAP5362IGL
Specification grade, Tamper-Resistant,
with Power Indicating LED,
smooth nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA.
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
SNAP5262BKLTR
SNAP5262BLLTR
SNAP5262LTR
SNAP5262GYLTR
SNAP5262ILTR
SNAP5262LALTR
SNAP5262RLTR
SNAP5262WLTR
SNAP5362BKLTR
SNAP5362BLLTR
SNAP5362LTR
SNAP5362GYLTR
SNAP5362ILTR
SNAP5362LALTR
SNAP5362RLTR
SNAP5362WLTR
Orange
SNAP5262IGLTR
SNAP5362IGLTR
* For Assembled in USA receptacles, add suffix NA.
Ex: SNAP5262BKANA.
Specification grade, Tamper-Resistant,
smooth nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA.
Isolated ground∆, Specification grade,
TR with Power Indicating LED.
2.62"
(66.5)
3.28"
(83.3)
Description
Note: ∆See section M additional information on isolated ground devices.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See pages A-46 and A-47 for accessories.
See page A-54 for technical information.
See section N for wallplates.
Consult factory for available Split-Circuit capable SNAPConnect® devices.
.86"
(21.9)
SNAP5362IA
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
SNAP5362LATR
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
SNAP5362L
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
SNAPConnect® Right Angle Pigtailed Connector
Description
Wire Type
General Use
Catalog Number
Assembled in USA
Catalog Number
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate
housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
SNAP5362GYLTR
.78"
(19.8)
1.48"
(37.6)
Note: For Assembled in USA products, must order connector with NA suffix.
See page A-54 for technical information.
.63"
(16.0)
Many of these products are Assembled in USA, as indicated, and many are Buy
American Compliant. Please contact Hubbell with any certification requirements.
SNAP1RA
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-15
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
1.64"
(41.7)
Extra Heavy Duty
SNAPConnect® Receptacles
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP2162A
.86"
(21.9)
SNAP2162ITR
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP2162GYL
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP2162RLTR
.78"
(19.8)
Description
Color
Catalog Number
Specification grade, Style Line® decorator,
flush, nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA*.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2152BKA*
SNAP2152A*
SNAP2152GYA*
SNAP2152IA*
SNAP2152LAA*
SNAP2152RA*
SNAP2152WA*
SNAP2162BKA*
SNAP2162A*
SNAP2162GYA*
SNAP2162IA*
SNAP2162LAA*
SNAP2162RA*
SNAP2162WA*
Specification grade, Tamper-Resistant,
Style Line® decorator, flush, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA.
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2152BKTR
SNAP2152BLTR
SNAP2152TR
SNAP2152GYTR
SNAP2152ITR
SNAP2152LATR
SNAP2152RTR
SNAP2152WTR
SNAP2162BKTR
SNAP2162BLTR
SNAP2162TR
SNAP2162GYTR
SNAP2162ITR
SNAP2162LATR
SNAP2162RTR
SNAP2162WTR
Isolated ground∆, Specification grade,
Tamper-Resistant.
Orange
SNAP2152IGTR
SNAP2162IGTR
Specification grade, with Power Indicating LED,
Style Line® decorator, flush, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA.
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2152BKL
SNAP2152BLL
SNAP2152L
SNAP2152GYL
SNAP2152IL
SNAP2152LAL
SNAP2152RL
SNAP2152WL
SNAP2162BKL
SNAP2162BLL
SNAP2162L
SNAP2162GYL
SNAP2162IL
SNAP2162LAL
SNAP2162RL
SNAP2162WL
Isolated ground∆, Specification grade,
with Power Indicating LED.
Orange
SNAP2152IGL
SNAP2162IGL
Specification grade, Tamper-Resistant,
with Power Indicating LED,
Style Line® decorator, flush, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA.
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2152BKLTR
SNAP2152BLLTR
SNAP2152LTR
SNAP2152GYLTR
SNAP2152ILTR
SNAP2152LALTR
SNAP2152RLTR
SNAP2152WLTR
SNAP2162BKLTR
SNAP2162BLLTR
SNAP2162LTR
SNAP2162GYLTR
SNAP2162ILTR
SNAP2162LALTR
SNAP2162RLTR
SNAP2162WLTR
Isolated ground∆, Specification grade,
TR with Power Indicating LED.
Orange
SNAP2152IGLTR
SNAP2162IGLTR
2.62"
(66.5)
3.28"
(83.3)
1.48"
(37.6)
.63"
(16.0)
SNAP1RA
20A 125V
NEMA 5-20R
UL CSA
1 HP
Style Line® Decorator
* For Assembled in USA receptacles, add suffix NA.
Ex: SNAP2152BKANA.
1.64"
(41.7)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Note: ∆See section M additional information on isolated ground devices.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See pages A-46 and A-47 for accessories.
See page A-54 for technical information.
See section N for wallplates.
Consult factory for available Split-Circuit capable SNAPConnect® devices.
SNAPConnect® Right Angle Pigtailed Connector
Description
Wire Type
General Use
Catalog Number
Assembled in USA
Catalog Number
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate
housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
Note: For Assembled in USA products, must order connector with NA suffix.
See page A-54 for technical information.
Many of these products are Assembled in USA, as indicated, and many are Buy
American Compliant. Please contact Hubbell with any certification requirements.
Dimensions in Inches (mm)
A-16
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
1.41"
(35.8)
Hubbell-PRO Heavy Duty
Specification Grade Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Duplex
Description
Color
Catalog Number
Smooth nylon face, duplex,
back and side wired.
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
5252AAL
5252ABLK
5252AB
5252AG
5252AI
5252ALA
5252AOW
5252AR
5252AW
5352AAL
5352ABLK
5352AB
5352AG
5352AI
5352ALA
5352AOW
5352AR
5352AW
Almond
Gray
Ivory
Light Almond
Orange
White
IG5252AL
IG5252GY
IG5252I
IG5252LA
IG5252
IG5252W
IG5352AL
IG5352GY
IG5352I
IG5352LA
IG5352
IG5352W
Isolated ground∆, Tamper-Resistant,
smooth face, duplex,
back and side wired.
Ivory
Orange
White
IG5252ITR
IG5252TR
IG5252WTR
IG5352ITR
IG5352TR
IG5352WTR
Finder groove nylon face, duplex,
back and side wired.
Almond
Black
Blue
Brown
Gray
Ivory
Light Almond
Office White
Red
White
5262AL
5262BLK
–
5262B
5262G
5262I
5262LA
5262OW
5262R
5262W
5362AL
5362BLK
5362BL
5362B
5362G
5362I
5362LA
5362OW
5362R
5362W
Weather Resistant,
finder groove nylon face, duplex,
back and side wired.
Black
Brown
Gray
Ivory
White
5262BKWR
5262WR
5262GYWR
5262IWR
5262WWR
5362BKWR
5362WR
5362GYWR
5362IWR
5362WWR
Isolated ground∆,
finder groove face, duplex,
back and side wired.
Black
Blue
Gray
Ivory
Orange
Office White
White
CR5252IGBK
–
CR5252IGGY
CR5252IGI
CR5252IG
CR5252IGOW
CR5252IGW
CR5352IGBK
CR5352IGBL
CR5352IGGY
CR5352IGI
CR5352IG
CR5352IGOW
CR5352IGW
Isolated ground∆,
smooth face, duplex,
back and side wired.
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
5252AI
1.33"
(33.8)
2.73"
(69.3)
3.28"
(83.3)
.80"
(20.3)
1.05" (26.7)
IG5352
1.41"
(35.8)
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
5262B
1.41"
(35.8)
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
5362IWR
Note: ∆See section M for additional information on isolated ground devices.
See page A-46 for accessories.
See page A-57 for technical information.
See page Tech-10 for Tamper and Weather Resistant descriptions.
Horsepower ratings listed above are AC only.
See section N for wallplates.
1.33"
(33.8)
2.73"
(69.3)
3.28"
(83.3)
.80"
(20.3)
1.05" (26.7)
CR5252IG
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-17
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
USB Charger Receptacle Tamper-Resistant Duplex
Hubbell’s USB Charger Receptacle provides both USB and AC electrical power in a standard single gang electrical opening.
Designed to provide more charging options for personal electronics.
Typical Applications
Ideal for use in renovation, new construction and to add capacity for USB charging. Especially suited for use in hotels, hospitals, schools,
offices, homes and more.
Hotels
Schools
Healthcare
Offices
Capability to charge wide range
of devices including:
• Tablets
• Smartphones
• MP3 players
• Apple® iPad®
• Apple® iPod®
• Apple® iPhone®
Residential
Automatic self-grounding staple
Tamper-Resistant decorator duplex
Green LED indicator to show
USB power available
Back and side wire for solid or
stranded wire
Two USB ports
3 Amps, 5 Volt DC
• Complies with battery charging specification
USB BC1.2
• Compatible with USB 1.1/2.0/3.0 devices,
including Apple® products
Impact and chemical resistant
• Complies with Part 15 of the FCC rules
Flush fit design
• cULus listed to UL498 and UL1310
USB15X2W
1.75"
(44.5)
USB Charger Receptacles
3.28"
(83.3)
2.62"
(66.5)
1.96"
(49.9)
USB15X2W
Dimensions in Inches (mm)
A-18
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Description
Color
15A 125V AC
20A 125V AC
USB Charger Tamper-Resistant receptacle,
Two USB Type 2.0 ports 3 Amp, 5 Volt DC,
15 or 20 Amp, 125 Volt AC decorator duplex.
Black
Brown
Gray
Ivory
Light Almond
White
USB15X2BK
USB15X2
USB15X2GY
USB15X2I
USB15X2LA
USB15X2W
USB20X2BK
USB20X2
USB20X2GY
USB20X2I
USB20X2LA
USB20X2W
Note: See page Tech-10 for Tamper-Resistant descriptions.
See page A-8 for Hospital Grade version.
See page A-56 for technical information.
Apple, iPad, iPod and iPhone are registered trademarks of Apple, inc.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
Commercial Specification Grade Receptacles
Features and Benefits
TamperResistant
Installation ease
• Single tab breakoff ears
• Self-grounding staple
Durable construction
• Nylon face and base
Installation ease
• Easy access split circuit tab
• Fork terminal capable
• Oversized terminal screws
Sturdy construction
• Wrap-around galvanized steel straps
BR15I
BR15TR
TamperResistant
Installation ease
• Self-grounding staple
Durable construction
• Nylon face and base
Installation ease
• Easy access split circuit tab
• Fork terminal capable
Modern architectural appearance
• Style Line® decorator face
Sturdy construction
• Wrap-around galvanized steel straps
DR20GRYTR
DR20I
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-19
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
1.32"
(33.6)
Commercial
Specification Grade Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Duplex
2.73"
(69.3)
3.28"
(83.3)
Description
Color
Catalog Number
Smooth nylon face, duplex,
back and side wired.
Almond
Black
Blue
Brown
Gray
Ivory
Light Almond
Office White
Red
White
BR15AL
BR15BLK
BR15BL
BR15
BR15GRY
BR15I
BR15LA
BR15OW
BR15R
BR15WHI
BR20AL
BR20BLK
BR20BL
BR20
BR20GRY
BR20I
BR20LA
BR20OW
BR20R
BR20WHI
Tamper-Resistant*,
smooth nylon face, duplex,
back and side wired.
Almond
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
BR15ALTR
BR15BLKTR
BR15BLTR
BR15TR
BR15GRYTR
BR15ITR
BR15LATR
BR15RTR
BR15WHITR
BR20ALTR
BR20BLKTR
BR20BLTR
BR20TR
BR20GRYTR
BR20ITR
BR20LATR
BR20RTR
BR20WHITR
Weather Resistant,
smooth nylon face, duplex,
back and side wired.
Black
Brown
Gray
Ivory
Light Almond
White
BR15BLKWR
BR15WR
BR15GRYWR
BR15IWR
BR15LAWR
BR15WHIWR
BR20BLKWR
BR20WR
BR20GRYWR
BR20IWR
BR20LAWR
BR20WHIWR
Weather and Tamper-Resistant*,
smooth nylon face, duplex,
back and side wired.
Black
Brown
Gray
Ivory
Light Almond
White
BR15BLKWRTR
BR15WRTR
BR15GRYWRTR
BR15IWRTR
BR15LAWRTR
BR15WHIWRTR
BR20BLKWRTR
BR20WRTR
BR20GRYWRTR
BR20IWRTR
BR20LAWRTR
BR20WHIWRTR
Isolated ground∆,
smooth nylon face, duplex,
side wired only.
Almond
Gray
Ivory
Light Almond
Orange
White
IG15CRAL
IG15CRGRY
IG15CRI
IG15CRLA
IG15CR
IG15CRWHI
IG20CRAL
IG20CRGRY
IG20CRI
IG20CRLA
IG20CR
IG20CRWHI
Isolated ground∆,
Style Line® decorator*,
smooth nylon face, duplex,
back and side wired.
Almond
Gray
Ivory
Light Almond
Orange
White
IG15DRAL
IG15DRGRY
IG15DRI
IG15DRLA
IG15DR
IG15DRWHI
IG20DRAL
IG20DRGRY
IG20DRI
IG20DRLA
IG20DR
IG20DRWHI
.83"
(21.1)
BR15I
1.32"
(33.6)
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
BR20TR
1.32"
(33.6)
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
BR15IWR
1.32"
(33.6)
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
BR20WRTR
1.33"
(33.8)
2.73"
(69.3)
3.28"
(83.3)
Note: ∆See section M for additional information on isolated ground devices.
*Tamper-resistant and IG decorator devices are not Fed. Spec. Listed.
See page A-46 for accessories.
See page A-59 for technical information.
See page Tech-10 for Tamper and Weather Resistant descriptions.
See section N for wallplates.
.80"
(20.3)
1.05" (26.7)
IG20CR
Dimensions in Inches (mm)
A-20
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Commercial
Specification Grade Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
1.30"
(32.9)
Style Line® Decorator
Description
Color
Catalog Number
Smooth nylon face,
Style Line® decorator,
back and side wired.
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
DR15AL
DR15BLK
DR15
DR15GRY
DR15I
DR15LA
DR15R
DR15WHI
DR20AL
DR20BLK
DR20
DR20GRY
DR20I
DR20LA
DR20R
DR20WHI
Tamper-Resistant*,
Style Line® decorator,
smooth nylon face,
back and side wired.
Almond
Black
Brown
Gray
Ivory
Light Almond
White
DR15ALTR
DR15BLKTR
DR15TR
DR15GRYTR
DR15ITR
DR15LATR
DR15WHITR
DR20ALTR
DR20BLKTR
DR20TR
DR20GRYTR
DR20ITR
DR20LATR
DR20WHITR
Weather and Tamper-Resistant*,
Style Line® decorator,
smooth nylon face,
back and side wired.
Black
Brown
Gray
Ivory
Light Almond
White
DR15BLKWRTR
DR15WRTR
DR15GRYWRTR
DR15IWRTR
DR15LAWRTR
DR15WHIWRTR
DR20BLKWRTR
DR20WRTR
DR20GRYWRTR
DR20IWRTR
DR20LAWRTR
DR20WHIWRTR
Pre-wired receptacles,
Style Line® decorator,
smooth nylon face,
back and side wired, self-grounding,
8" solid wire leads.
Black
Brown
Gray
Ivory
Light Almond
White
DR15BLKP1
DR15P1
DR15GRYP1
DR15IP1
DR15LAP1
DR15WHIP1
DR20BLKP1
DR20P1
DR20GRYP1
DR20IP1
DR20LAP1
DR20WHIP1
Pre-wired receptacles,
Style Line® decorator,
smooth nylon face,
back and side wired, self-grounding,
8" stranded wire leads.
Black
Brown
Gray
Ivory
Light Almond
White
DR15BLKP2
DR15P2
DR15GRYP2
DR15IP2
DR15LAP2
DR15WHIP2
DR20BLKP2
DR20P2
DR20GRYP2
DR20IP2
DR20LAP2
DR20WHIP2
Pre-wired receptacles,
Tamper-Resistant*,
Style Line® decorator,
smooth nylon face,
back and side wired,
self-grounding, 8" solid wire leads.
Black
Brown
Gray
Ivory
Light Almond
White
DR15BLKTRP1
DR15TRP1
DR15GRYTRP1
DR15ITRP1
DR15LATRP1
DR15WHITRP1
DR20BLKTRP1
DR20TRP1
DR20GRYTRP1
DR20ITRP1
DR20LATRP1
DR20WHITRP1
Pre-wired receptacles,
Tamper-Resistant*,
Style Line® decorator,
smooth nylon face,
back and side wired,
self-grounding, 8" stranded wire leads.
Black
Brown
Gray
Ivory
Light Almond
White
DR15BLKTRP2
DR15TRP2
DR15GRYTRP2
DR15ITRP2
DR15LATRP2
DR15WHITRP2
DR20BLKTRP2
DR20TRP2
DR20GRYTRP2
DR20ITRP2
DR20LATRP2
DR20WHITRP2
2.73"
(69.4)
3.28"
(83.3)
1.07"
(27.1)
DR15GRY
1.30"
(32.9)
2.73"
(69.4)
3.28"
(83.3)
1.07"
(27.1)
DR20ITR
1.30"
(32.9)
2.73"
(69.4)
3.28"
(83.3)
1.07"
(27.1)
DR20GRYWRTR
1.30"
(32.9)
1.09"
(27.7)
3.28"
(83.3)
Note: *Tamper-resistant devices are not Fed. Spec. Listed.
See page A-46 for accessories.
See pages A-58 and A-59 for technical information.
See page Tech-10 for Tamper and Weather Resistant descriptions.
See section N for wallplates.
2.73"
(69.4)
DR20WHIP2
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-21
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Commercial
Specification Grade Receptacles
1.32”
(33.6)
Description
Color
Catalog Number
Smooth nylon face, duplex,
side wired only.
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
White
Almond
Black
Brown
Gray
Ivory
Light Almond
White
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
White
Black
Brown
Gray
Ivory
Light Almond
White
CR15AL
CR15BLK
CR15
CR15GRY
CR15I
CR15LA
CR15OW
CR15WHI
CR15ALTR
CR15BLKTR
CR15TR
CR15GRYTR
CR15ITR
CR15LATR
CR15WHITR
CRF15AL
CRF15BLK
CRF15
CRF15GRY
CRF15I
CRF15LA
CRF15OW
CRF15WHI
CR15BLKP1
CR15P1
CR15GRYP1
CR15IP1
CR15LAP1
CR15WHIP1
CR20AL
CR20BLK
CR20
CR20GRY
CR20I
CR20LA
CR20OW
CR20WHI
CR20ALTR
CR20BLKTR
CR20TR
CR20GRYTR
CR20ITR
CR20LATR
CR20WHITR
CRF20AL
CRF20BLK
CRF20
CRF20GRY
CRF20I
CRF20LA
CRF20OW
CRF20WHI
CR20BLKP1
CR20P1
CR20GRYP1
CR20IP1
CR20LAP1
CR20WHIP1
Black
Brown
Gray
Ivory
Light Almond
White
Black
Brown
Gray
Ivory
Light Almond
White
Black
Brown
Gray
Ivory
Light Almond
White
CR15BLKP2
CR15P2
CR15GRYP2
CR15IP2
CR15LAP2
CR15WHIP2
CR15BLKTRP1
CR15TRP1
CR15GRYTRP1
CR15ITRP1
CR15LATRP1
CR15WHITRP1
CR15BLKTRP2
CR15TRP2
CR15GRYTRP2
CR15ITRP2
CR15LATRP2
CR15WHITRP2
CR20BLKP2
CR20P2
CR20GRYP2
CR20IP2
CR20LAP2
CR20WHIP2
CR20BLKTRP1
CR20TRP1
CR20GRYTRP1
CR20ITRP1
CR20LATRP1
CR20WHITRP1
CR20BLKTRP2
CR20TRP2
CR20GRYTRP2
CR20ITRP2
CR20LATRP2
CR20WHITRP2
2.73"
(69.3)
.83"
(21.1)
CR15I
Tamper-Resistant*,
smooth nylon face, duplex,
side wired only.
1.32"
(33.6)
2.73"
(69.3)
3.28"
(83.3)
Finder groove,
nylon face, duplex,
side wired only.
.83"
(21.1)
CR15TR
Pre-wired receptacles,
smooth nylon face, duplex,
side wired only, self-grounding,
8" solid wire leads.
1.32"
(33.6)
2.73"
(69.3)
Pre-wired receptacles,
smooth nylon face, duplex,
side wired only, self-grounding,
8" stranded wire leads.
.83"
(21.1)
Pre-wired receptacles,
Tamper-Resistant*, smooth nylon face,
duplex, side wired only, self-grounding,
8" solid wire leads.
CRF15LA
1.32"
(33.6)
3.28"
(83.3)
20A 125V
NEMA 5-20R
UL CSA
1 HP
Duplex
3.28"
(83.3)
3.28"
(83.3)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
.85"
(21.7)
2.73"
(69.3)
CR15IP1
Pre-wired receptacles,
Tamper-Resistant*, smooth nylon face,
duplex, side wired only, self-grounding,
8" stranded wire leads.
Note: *Tamper-resistant devices are not Fed. Spec. Listed.
See page A-46 for accessories.
See pages A-58 and A-59 for technical information.
See page Tech-10 for Tamper-Resistant descriptions.
See section N for wallplates.
Dimensions in Inches (mm)
A-22
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Four-in-One Receptacle
4-PLEX is a perfect solution for outlet scarce locations. This receptacle can be mounted on a single or 2-gang flush outlet box or on a nonmetallic portable box for temporary power applications. If mounted on a 4-inch square box, this product complies with NEC® Article 406.4
(B). Available in industrial grade, hospital grade, isolated ground and surge protected versions. Accessories include mounting plates and
portable outlet boxes.
Mounts directly to 4-inch square box
Unique face design accepts up to four straight,
angle or molded plugs
Heavy duty, impact resistant housing
Heavy duty, triple wipe, brass power and ground contacts
“A” and “B” circuit
identification molded
into face
Removable knockouts for mounting to octagon
concrete ring or box
HBL415I
Snub hole for fast, easy terminations
Easily accessible break-off tabs for split circuit wiring
Three conductors energize all four outlets
Large #8 combination Robertson head terminal screws
for ease of wiring
.92"
(23.4)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
4-PLEX Receptacles
®
20A 125V
NEMA 5-20R
UL CSA
1 HP
Over Size Robertson/Slotted Head Terminal Screws
Description
Color
Catalog Number
Specification grade.
Black
Brown
Gray
Ivory
White
Orange
Blue
Ivory
HBL415BK
HBL415
HBL415GY
HBL415I
HBL415W
IG415
HBL415S
HBL415IS
Isolated ground∆.
Surge suppression.
HBL420BK
HBL420
HBL420GY
HBL420I
HBL420W
IG420
HBL420S
HBL420IS
Note: ∆See section M for additional information on isolated ground devices.
Horsepower ratings are AC only.
See page A-60 for technical information.
4-PLEX Receptacles are of a non-metallic design. Product is supplied with isolated ground symbol stickers.
Apply if needed. Mounts to 4-inch square box.
4.30" sq.
(109.2)
3.02" (76.7)
3.38" (85.9)
HBL415I
.38" (9.7)
3.28"
(83.3)
4.78"
(121.4)
Color
Catalog Number
4-PLEX Adapter Plates for
1- and 2-gang.
Blue
Brown
Gray
Ivory
Orange
Red
White
Black
Brown
Ivory
HBL4APBL
HBL4AP
HBL4APGY
HBL4API
HBL4APO
HBL4APR
HBL4APW
HBL4PBBK
HBL4PB
HBL4PBI
4-PLEX Portable Box, 4 in. (101.6) square
box with cord grip. Accepts up to .66 in. (16.8)
diameter cord.
2.75"
(69.9)
HBL4API
3.38" sq. (85.9)
4.30" sq.
(109.2)
NEC is a registered trademark of the National Fire Protection Association (NFPA).
®
.84"
(21.3)
2 Punchouts
4.05" sq.
(102.9)
Note: 4-PLEX Box is not UL listed or CSA Certified. UL listing does not apply when 4-PLEX Receptacle is used with 4-PLEX
Box in extension cord application. Supplied with one cord clamp.
www.hubbell-wiring.com
.19" (4.8)
1.75"
(44.5 )
3.38"sq. (85.9)
Accessories
Description
.1"
(2.5)
3.28" (83.3)
.66" (16.8)
Dia. Wire Hole
HBL4PBI
Dimensions in Inches (mm)
®
Wiring Device-Kellems
A-23
Straight Blade Devices
Pre-Fabricated Building Wiring System
Features and Benefits
Pre-Fab Systems Allow You To Save Time and Money,
Completing the Job Quicker and Exceed Schedule
• Provide Reduced Construction Schedules
• Ensure Consistent Quality
• Compliance with Code Requirements
• Speeds Installation
A Variety of Pre-Fab Solutions are Available:
1. Complete Turn key Pre-Fab System
2. Pre-Assembled Boxes and Brackets
3. Specialized Mounting Brackets and Hangers
Complete Pre-Fab System Steps:
1. Mail or E-mail Drawings
2. Complete Take Offs and Quotation Prepared
3. Proposal with Comparison to Traditional Methods is Submitted
4. Detail Documentation and Technical Support Provided
Note: For more information please contact Technical Services (475) 882-4820.
When Product Arrives
Clearly Marked Skids
Installation Drawings
Boxes Labeled
Field Installation Support
Numbered Assemblies
Qualified Savings
– By floor or area to customer specifications.
– Detailed layout with specified locations.
– With job name, building number, room number.
– Labeled to match installation drawings.
A-24
– Demonstrate high light savings
– Cost comparison to traditional wiring
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
Pre-Fabricated Building Wiring System
Components
Box Assembly - With Universal Mounting Bracket Features
Upper cross-brace brackets
Cable holders
Protection plate
Attachment tabs lock
into kickstand
Lower cross-brace brackets
Adjustable spacer and
back-side drywall support
for up to 6" walls
Device mounting frame
Pre-assembled Box with
Device Installed
Mounting Frames
Support Brackets and Hangers
10 Position Cable Holder
Universal Mounting
Bracket
Pre-assembled
with Box and
Plaster Ring
9 Position Cable Holder
Cross-brace (for use with Universal
Mounting Bracket
4 Position Bracket
Deck Hangers
3 Position Bracket
18" Kickstand Bracket
www.hubbell-wiring.com
Deck Hanger
®
Wiring Device-Kellems
A-25
Straight Blade Devices
Insulgrip® and Valise® 15 and 20 Ampere Plugs and Connectors
Features and Benefits
Individually molded face for
each blade configuration keeps
debris out of plug interior
Roomy wiring chamber provides
ample space for wiring
Individual wiring terminals
completely enclosed in their
own separate chambers
Powerful, offsetting cord grips clamp
on individual conductors and outer cord
jacket to prevent strain on terminals
Ribbed nylon housing is impact
and chemical resistant
Beveled housing prevents snagging
when dragged across uneven surfaces
HBL5266C
Integral VARI-SIZE®
insert adjusts to a
wide range of cord
sizes: .23 to .72 inch
(5.8 to 18.3).
Multiple drive screws
provide screwdriver
versatility. Pocketed
recess for cord
grip screws deter
slippage of the
screwdriver..
Catalog number is
visible on the device
while in use for easy
identification.
VARI-SIZE® pointer
set to “smaller than
gauge" position.
Cord diameter range
is .23 to .36 inch
(5.8 to 9.0). Accepts
slotted and Phillips
head drivers.
Powerful offsetting
cord grips clamp on
individual conductors
and outer cord jacket
to prevent strain on
terminations.
Transparent angled
wiring entrance holes
permit “straight in"
conductor insertion
Valise® Plug
Eight specially designed load bearing
locking lugs insure a positive fit as
the blade holder and sides are closed
Unique patented clamp type terminals provide a superior
electrical connection by “bundling” the conductor strands
when clamps are tightened
Nylon webs are provided to make
wiring quick and easyby joining the
three sections together during assembly
Powerful cord grips prevent conductor
slippage and strain on wiring terminals
Totally insulated impact and
crush resistant nylon body
Removable cord inserts.
Device accommodates a
wide range of cord sizes,
.220" -.660" (5.6-16.8)
Two captive multiple
drive assembly screws
HBL5969VY
A-26
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
Elastogrip® High Visibility Yellow Plugs and Connectors
Features and Benefits
Watertight Plug
Multiple drive “U-Drive” fast lead body assembly screws
Neoprene bushing keeps water and dust out
Color coded Kellems GOTCHA® rings
provide increased cord retention
HBL14W47
Thermoplastic elastomer housing resists weathering
caused by ultraviolet rays and ozone better than rubber;
Also oil and chemical resistant
Three separate transparent wiring chambers
allow for visual inspection
Watertight Connector Body
Closure plug seals connector body
when disconnected from plug
Integral weatherproofing shroud seals
connection between plug and connector
HBL15W47
Pretensioned “bypass” design female contacts
for abuse resistance and reliability
Nylon compression nut keeps water and dust
from getting into the body around the cord
Dust Tight Plug
Thermoplastic elastomer housing
Powerful nylon cord grip prevents
strain on terminals
Dust and moisture seal keeps out liquids,
metal filings and other foreign materials
HBL1447
Multiple drive “U-Drive” fast lead body assembly screws
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-27
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
G
G
W
IP20
SUITABILITY
1.97"
(50.0)
Plugs
1.53"
(38.9)
HBL5266C
1.22"
(30.9)
2.11"
(53.6)
1.53"
(38.9)
HBL5266CA
2.19"
(55.6)
1.56"
(39.6)
W
15A 125V
NEMA 5-15P
UL CSA
20A 125V
NEMA 5-20P
UL CSA
Insulgrip®
Description
Cord Diameter
Catalog Number
Black and white nylon.
.230"-.720"
(5.8-18.3)
HBL5266C
Blue and white nylon.
.230"-.720"
(5.8-18.3)
HBL5266CBL
Black nylon extra large cord clamp.
.360"-.720"
(9.1-18.3)
HBL5266EBK
HBL5366EBK
Corrosion resistant yellow nylon.
.230"-.720"
(5.8-18.3)
HBL52CM66C
HBL53CM66C
8-position angle plug, black
and white nylon.
.325"-.655"
(8.3-16.6)
HBL5266CA
HBL5366CA
8-position angle plug,
transparent enclosure.
.325"-.655"
(8.3-16.6)
HBL5266CAT
–
Anchor lock, black
and white nylon.
.230"-.720"
(5.8-18.3)
HBL5280C*
–
Anchor lock, corrosion resistant
yellow nylon.
.230"-.720"
(5.8-18.3)
HBL52CM80C*
–
Finger grip, black neoprene,
combination screws. CSA only.
.312"-.468"
(7.9-11.9)
HBL5921
–
Fusible, black vinyl housing,
slotted screws. CSA only.
.296"-.625"
(7.5-15.9)
HBL5299
–
HBL1447
HBL5366C
–
IP20 and IP55
Elastogrip
2.63"
(66.8)
1.56"
(39.6)
SUITABILITY
®
Description
Cord Diameter
Catalog Number
Yellow elastomer, dust tight.
.300"-.655"
(7.6-16.6)
HBL1447
HBL1433
Yellow elastomer, watertight.
.300"-.655"
(7.6-16.6)
HBL14W47**
HBL14W33**
HBL14W47
IP20
1.88"
(47.8)
Description
Cord Diameter
Catalog Number
1.25"
(31.8)
Yellow nylon.
.220"-.660"
(5.6-16.8)
HBL5965VY
HBL5364VY
1.13"
(28.7)
Black nylon.
.220"-.660"
(5.6-16.8)
HBL5965VBLK
HBL5364VBK
Gray nylon.
.220"-.660"
(5.6-16.8)
HBL5965VGY
–
Orange nylon, sold in bulk
pack of 50.
.220"-.660"
(5.6-16.8)
HBL515PVO
–
Insulation displacement
terminals, black nylon.
.230"-.360"
(5.8-9.1)
HBL5966VBLK
–
Insulation displacement
terminals, yellow nylon.
.230"-.360"
(5.8-9.1)
HBL5966VY
–
HBL5965VY
1.17"
(29.7)
1.60"
(40.6)
HBL5966VBLK
SUITABILITY
Valise®
1.24"
(31.5)
Note: *UL Component Listed only. Not for general use applications.
**Watertight plugs IP55 suitability when installed and used properly with mating Elastogrip
watertight connector bodies.
Horsepower ratings listed are AC only.
See page A-47 for accessories.
Dimensions in Inches (mm)
A-28
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
IP20
SUITABILITY
Connector Bodies
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Insulgrip®
2.78"
(70.6 )
1.41"
(35.6 )
1.53"
(38.9)
Description
Cord Diameter
Catalog Number
Black and white nylon.
.230"-.720"
(5.8-18.3)
HBL5269C
Blue and white nylon.
.230"-.720"
(5.8-18.3)
HBL5269CBL
Black nylon extra large cord clamp.
.360"-.720"
(9.1-18.3)
HBL5269EBK
HBL5369EBK
Corrosion resistant yellow nylon.
.230"-.720"
(5.8-18.3)
HBL52CM69C
HBL53CM69C
HBL5369C
HBL5269C
–
4.00"
(101.6)
1.61"
(40.9)
Note: See page A-47 for accessories.
HBL1547
IP20 and IP55
Elastogrip
®
SUITABILITY
3.00"
(76.2)
Description
Cord Diameter
Catalog Number
Yellow elastomer, dust tight.
.300"-.655"
(7.6-16.6)
HBL1547
HBL1533
Yellow elastomer, watertight.
.300"-.655"
(7.6-16.6)
HBL15W47*
HBL15W33*
1.61"
(40.9)
HBL15W47
IP20
Valise®
SUITABILITY
2.63"
(66.8)
Description
Cord Diameter
Catalog Number
Yellow nylon.
.220"-.660"
(5.6-16.8)
HBL5969VY
HBL5369VY
Black nylon.
.220"-.660"
(5.6-16.8)
HBL5969VBLK
HBL5369VBK
Gray nylon.
.220"-.660"
(5.6-16.8)
HBL5969VGY
–
Orange nylon, sold in bulk
pack of 50.
.220"-.660"
(5.6-16.8)
HBL515CVO
–
Insulation displacement
terminals, black nylon.
.230"-.360"
(5.8-9.1)
HBL5963VBK
–
Insulation displacement
terminals, yellow nylon.
.230"-.360"
(5.8-9.1)
HBL5963VY
–
1.25"
(31.8)
1.13"
(28.7)
HBL5969VY
1.25"
(31.8)
Note: *Watertight connectors IP55 suitability when closure plug inserted or when installed and used properly with
mating Elastogrip watertight plug.
Connector bodies are not HP rated.
See page A-47 for accessories.
2.25"
(57.2)
1.17"
(29.7)
HBL5963VY
For quick visual identification of circuits or configurations.
Colored Cord Clamps*
Description
Color
Catalog Number
For use with 15A and 20A, 2 pole/3 wire, insulgrip
plugs and connectors with cord diameter range of
.230"-.720" (5.8-18.3) only.
Blue
Green
Orange
Purple
Red
Yellow
HBLCORDCLAMPBL
HBLCORDCLAMPGN
HBLCORDCLAMPOR
HBLCORDCLAMPP
HBLCORDCLAMPR
HBLCORDCLAMPY
Note: *Clamp only. Contains no screws. Order in increments of 10. Not UL Listed or CSA Certified.
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-29
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
G
G
W
Flanged Inlets
2.56"
(65.0)
2.19"
(55.6)
.16" (4.1)
Dia.
1.72"
(43.7)
1.72"
(43.7)
HBL5278C
W
15A 125V
NEMA 5-15P
UL CSA
20A 125V
NEMA 5-20P
UL CSA
Description
Catalog Number
Nylon casing, back wired.
HBL5278C
Weatherproof, gray, with lift cover and multiple
drive screws.
HBL61CM64
–
Weatherproof, black, with lift cover and boot,
multiple drive screws.
HBL61CM64BK
–
Stainless steel flange, phenolic body,
miniature style, for molded on connectors only,
multiple drive screws.
HBL5240*
–
HBL5378C
Note: *Specially designed to accept "molded-on" connector bodies. Catalog number HBL5240 will not accept re-wireable size
connector bodies listed in this catalog or molded connectors having a "rejection obstruction" as required by Underwriters
Laboratories Inc. standard #817 cord sets and power supply cords" effective 7/1/81.
See pages A-46 and A-47 for accessories.
2.25"
(57.2)
.39"(9.9)
Dia.
2.88"
(73.2)
1.88"
(47.8)
2.66"
(67.6)
.19" (4.8) Dia.
4 Holes
1.56"
(39.6)
HBL61CM64
G
G
W
2.56"
(65.0)
Flanged Receptacles
2.19"
(55.6)
.16" (4.1)
Dia.
1.72"
(43.7)
1.72"
(43.7)
HBL5279C
W
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Description
Catalog Number
Nylon casing, back wired.
HBL5279C
Stainless steel flange, phenolic body,
covered terminals, multiple drive screws.
HBL5279
–
Stainless steel flange, brown phenolic
(mounting screws packed separately).
HBL5256
–
Weatherproof, gray nylon, with lift cover and boot,
multiple drive screws.
–
HBL5379C
HBL61CM65**
Note: **Not CSA Certified.
See pages A-46 and A-47 for accessories.
.20" Dia.
(5.1)
1.47"
(37.3)
2.06"
(52.3)
1.09"
(27.7)
HBL5256
2.25"
(57.2)
.39"(9.9)
Dia.
2.88"
(73.2)
1.88"
(47.8)
2.66"
(67.6)
1.56"
(39.6)
.19" (4.8) Dia.
4 Holes
HBL61CM65
Dimensions in Inches (mm)
A-30
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 250 Volts
2 Pole, 3 Wire Grounding
G
G
20A 250V
NEMA 6-20R
UL CSA
2 HP
15A 250V
NEMA 6-15R
UL CSA
1.5 HP
Receptacles
1.65"
(41.9)
HBL® Extra Heavy Duty, Specification Grade, Duplex
Description
Color
Catalog Number
Flush, nylon face,
back and side wired,
multiple drive screws.
Black
Brown
Gray
Ivory
Red
–
HBL5662
–
HBL5662I
–
HBL5462BK
HBL5462
HBL5462GY
HBL5462I
HBL5462R
Isolated ground∆.
Orange
IG5662
IG5462
3.28"
(83.3)
2.72"
(69.1)
HBL5662I
.96"
(24.4)
1.65"
(41.9)
HBL® Extra Heavy Duty, Specification Grade, Single
Description
Color
Catalog Number
Flush, nylon face,
back and side wired.
Brown
Gray
Ivory
Red
White
HBL5661
–
HBL5661I
–
–
HBL5461
HBL5461GY
HBL5461I
HBL5461R
HBL5461W
Isolated ground∆.
Orange
IG5661
IG5461
Panel mount 1.94 in. (49.3) centers.
Brown
HBL5684
–
Ring terminal connection.
Brown
HBL5661RT
–
3.28"
(83.3)
2.72"
(69.1)
.96"
(24.4)
HBL5462I
1.19”
(30.2)
HBL® Extra Heavy Duty, Specification Grade
Duplex and Single Panel Mount
1.94"
(49.3)
Description
Color
Catalog Number
Flush, nylon duplex face,
side wired only.
Brown
Ivory
HBL5652
HBL5652I
–
–
Panel mount 1.75 in. (44.5) centers.
Brown
HBL5658
–
1.39"
(35.3)
Note: ∆See section M for additional information on isolated ground devices.
HP ratings are AC only.
See page A-46 for accessories.
1.63"
(41.4 )
HBL5661
1.63"
(41.4 )
1.94"
(49.3)
1.39"
(35.3)
HBL5684
.875"
(22.2)
1.47"
(35.3)
1.75" 1.39"
(44.5) (35.3)
#8-32
Tap
1.13"
(28.7)
HBL5658
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-31
Straight Blade Devices
15 and 20 Ampere, 250 Volts
2 Pole, 3 Wire Grounding
G
1.97"
(50.0)
15A 250V
NEMA 6-15P
UL CSA
1.5 HP
Plugs
1.53"
(38.9)
HBL5666C
G
20A 250V
NEMA 6-20P
UL CSA
2 HP
Description
Cord Diameter
Catalog Number
Insulgrip® Plug, black and
white nylon.
.230"-.720"
(5.8-18.3)
HBL5666C
HBL5466C
Insulgrip® Plug, corrosion resistant,
yellow nylon.
.230"-.720"
(5.8-18.3)
HBL56CM66C
HBL54CM66C
8-Position Insulgrip® Angle Plug,
black and white nylon.
.325"-.655"
(8.3-16.6)
HBL5666CA
HBL5466CA
Valise® Plug, yellow nylon.
.220"-.660"
(5.6-16.8)
HBL5666VY
HBL5464VY
1.22"
(30.9)
Note: See page A-47 for accessories.
2.11"
(53.6)
1.53"
(38.9)
HBL5666CA
G
1.88"
(47.8)
1.5"
(38.1)
1.13"
(28.7)
Insulgrip® Flanged Inlets
G
15A 250V
NEMA 6-15P
UL CSA
1.5 HP
20A 250V
NEMA 6-20P
UL CSA
2 HP
Description
Catalog Number
Nylon casing, back wired.
HBL5678C
HBL5478C
Note: Flanged inlets are not HP rated.
See page A-47 for accessories.
HBL5666VY
2.56"
(65.0)
2.19"
(55.6)
.16" (4.1)
Dia.
1.72"
(43.7)
1.72"
(43.7)
HBL5678C
For quick visual identification of circuits or configurations.
Colored Cord Clamps*
Description
Color
Catalog Number
For use with 15A and 20A, 2 pole/3 wire, insulgrip
plugs and connectors with cord diameter range of
.230"-.720" (5.8-18.3) only.
Blue
Green
Orange
Purple
Red
Yellow
HBLCORDCLAMPBL
HBLCORDCLAMPGN
HBLCORDCLAMPOR
HBLCORDCLAMPP
HBLCORDCLAMPR
HBLCORDCLAMPY
Note: *Clamp only. Contains no screws. Order in increments of 10. Not UL Listed or CSA Certified.
Dimensions in Inches (mm)
A-32
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 250 Volts
2 Pole, 3 Wire Grounding
G
G
15A 250V
NEMA 6-15R
UL CSA
Connector Bodies
20A 250V
NEMA 6-20R
UL Listed
Description
Cord Diameter
Catalog Number
Insulgrip® Connector Body,
black and white nylon,
multiple drive screws.
.230"-.720"
(5.8-18.3)
HBL5669C
HBL5469C
Valise® Connector Body,
yellow nylon.
.220"-.660"
(5.6-16.8)
HBL5669VY
HBL5469VY
2.78"
(70.6)
1.53"
(38.9)
1.41"
(35.8)
HBL5669C
Note: See page A-47 for accessories.
2.63"
(66.88)
1.50"
(38.1)
1.13"
(28.7)
HBL5669VY
G
2.56"
(65.0)
G
2.19"
(55.63)
15A 250V
NEMA 6-15R
UL CSA
Flanged Receptacles
Description
Catalog Number
Nylon casing,
multiple drive screws.
HBL5679C
Stainless steel flange, brown phenolic
housing (mounting screws
packaged separately).
HBL5656
20A 250V
NEMA 6-20R
UL Listed
.16" (4.1)
Dia.
HBL5479C
1.72"
(43.7)
1.72"
(43.7)
HBL5679C
–
Note: Connector bodies are not HP rated.
See pages A-46 and A-47 for accessories.
.20" Dia.
(5.1)
1.47"
(37.3)
2.06"
(52.3)
HBL5656
1.09"
(27.7)
For quick visual identification of circuits or configurations.
Colored Cord Clamps*
Description
Color
Catalog Number
For use with 15A and 20A, 2 pole/3 wire, insulgrip
plugs and connectors with cord diameter range of
.230"-.720" (5.8-18.3) only.
Blue
Green
Orange
Purple
Red
Yellow
HBLCORDCLAMPBL
HBLCORDCLAMPGN
HBLCORDCLAMPOR
HBLCORDCLAMPP
HBLCORDCLAMPR
HBLCORDCLAMPY
Note: *Clamp only. Contains no screws. Order in increments of 10. Not UL Listed or CSA Certified.
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-33
Straight Blade Devices
15 and 20 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 2 Wire Non-Grounding and 2 Pole, 3 Wire Grounding
W
15A, 125V,
2 Pole, 2 Wire Non-Grounding,
Valise® Plugs
1.68"
(42.7)
1.25"
(31.8)
.88"
(22.4)
HBL5865VY
2.38"
(60.5)
1.25"
(31.8)
.88"
(22.4)
IP20
SUITABILITY
15A 125V
NEMA 1-15R
UL CSA
0.5 HP
W
15A 125V
NEMA 1-15P
UL CSA
0.5 HP
Description
Cord Diameter
Catalog Number
Yellow nylon, non-polarized.
.218"-.385"
(5.5-9.8)
–
HBL5865VY
Yellow nylon, polarized.
.218"-.385"
(5.5-9.8)
–
HBL5866VY
Black nylon, polarized.
Type 17/2 “SVT” cord
–
HBL5867VBK
Valise® Connector Bodies
Description
Cord Diameter
Catalog Number
Yellow nylon.
.218"-.385"
(5.5-9.8)
HBL5869VY
HBL5869VY
–
G
2.63"
(66.8)
3.28"
(83.3)
1.33"
(33.8)
1.19"
(30.2)
HBL5302
15A 277V AC
NEMA 7-15R
UL CSA
2 HP
Description
Cord Diameter
Finger grip, black elastomer.
.312"-.468"
(7.9-11.9)
W
15A 277V AC
NEMA 7-15P
2 HP
Catalog Number
–
HBL5929*
Receptacles and Connector Bodies
Description
Cord Diameter
Receptacle, flush duplex, brown,
back and side wired.
Connector Body, phenolic and
steel body.
1.50"
(38.1)
W
15A, 277V AC,
2 Pole, 3 Wire Grounding,
Plugs
G
Catalog Number
–
HBL5302
–
.296"-.625"
(7.5-15.9)
HBL5324
–
Note: *Not UL Listed.
Horsepower ratings are AC only.
See pages A-46 and A-47 for accessories.
1.63"
(41.4)
HBL5929
20A, 250V,
2 Pole, 2 Wire Non-Grounding,
Valise® Plugs
1.50"
(38.1)
1.88"
(47.8)
IP20
SUITABILITY
Description
Cord Diameter
Yellow nylon.
.220"-.660"
(5.6-16.8)
HBL9758VY
20A 250V
NEMA 2-20R
UL Listed
2 HP
20A 250V
NEMA 2-20P
UL Listed
2 HP
Catalog Number
–
HBL9758VY
Receptacle, Single
Description
Catalog Number
Black phenolic.
HBL5552B
–
Note: Horsepower ratings are AC only and apply to plugs and receptacles only.
See pages A-46 and A-47 for accessories.
3.28" 1.39"
(83.3) (35.3)
1.14"
(29.0)
HBL5552B
Dimensions in Inches (mm)
A-34
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
20 Ampere, 125/250 Volts, 3Ø 250 Volts AC and 3ØY 120/208V AC
3 Pole, 3 Wire Non-Grounding; 3 Pole, 4 Wire Grounding; 4 Pole 4 Wire Non-Grounding
W
W
Y
20A, 125/250V,
3 Pole, 3 Wire Non-Grounding,
Receptacles and Plugs
Description
Receptacle, black phenolic.
Plug, Insulgrip®, nylon.
X
IP20
SUITABILITY
X
Y
20A 125V/250V
NEMA 10-20R
UL Listed
2(1) HP
Cord Diameter
20A 125V/250V
NEMA 10-20P
UL Listed
2(1) HP
3.28" 1.39"
(83.3) (35.3)
Catalog Number
–
HBL6810
.385"-.780"
(9.8-19.8)
–
–
HBL9977C
.97"
(24.6)
Note: Horsepower ratings listed above are AC only.
Horsepower ratings not in parentheses are phase to phase (208 to 240V AC).
Those in parentheses are phase to neutral (120V AC).
See pages A-46 and A-47 for accessories.
HBL6810
2.50"
(63.5)
G
20A, 125/250V,
3 Pole, 4 Wire Grounding,
Receptacles and Plugs
Description
Y
IP20
1.94"
(49.2)
G
X
X
Y
W
W
SUITABILITY
20A 125V/250V
NEMA 14-20R
UL CSA
2(1) HP
20A 125V/250V
NEMA 14-20P
UL CSA
2(1) HP
Cord Diameter
Catalog Number
Receptacle, black nylon body,
back and side wired.
–
HBL8410
Plug, nylon, angle 4-position.
.390"-.775"
(9.9-19.7)
–
HBL9977C
–
HBL8411C
2.38"
(60.5) 1.39"
(35.3)
Note: See pages A-46 and A-47 for accessories.
1.19"
(30.2)
G
20A, 3Ø 250V AC,
3 Pole, 4 Wire Grounding,
Receptacles and Plugs
Description
Z
IP20
G
X
Z
X
Y
Y
20A 3Ø 250V AC
NEMA 15-20R
UL CSA
3 HP
20A 3Ø 250V AC
NEMA 15-20P
UL CSA
3 HP
SUITABILITY
Cord Diameter
HBL8410
2.34"
(59.4)
1.61"
(40.9)
Catalog Number
Receptacle, black nylon body,
back and side wired.
–
HBL8420
Plug, nylon, angle 4-position.
.390"-.775"
(9.9-19.7)
–
3.64"
(92.5)
–
HBL8421C
HBL8411C
Note: Horsepower ratings listed above are AC only.
Horsepower ratings not in parentheses are phase to phase (208 to 240V AC).
Horsepower ratings in parentheses are phase to neutral (120V AC).
See pages A-46 and A-47 for accessories.
IP20
20A, 3ØY 120/208V AC,
4 Pole, 4 Wire Non-Grounding,
Receptacles and Plugs
SUITABILITY
Description
Cord Diameter
W
W
Z
X
Z
X
Y
Y
20A 3ØY 120/208V AC
NEMA 18-20R
UL Listed
2 HP
20A 3ØY 120/208V AC
NEMA 18-20P
UL Listed
2 HP
2.38"
(60.5) 1.39"
(35.3)
1.19"
(30.2)
Catalog Number
Receptacle, black nylon body.
–
HBL7250
Plug, nylon, angle, 4-position.
.390"-.775"
(9.9-19.7)
–
HBL7250
–
2.34"
(59.4)
HBL7251C
1.61"
(40.9)
Note: Horsepower ratings are phase to phase (208 to 240V AC).
Weatherproof boots for plugs not available.
See pages A-46 and A-47 for accessories.
3.64"
(92.5)
HBL7251C
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-35
Straight Blade Devices
16 Ampere, 250 Volts AC International
2 Pole, 3 Wire Grounding
1.55"
(39.4)
1.41"
(35.8)
1.52"
(38.6)
1.89"
(48.0)
Receptacle IEC 320 Compatible
Description
Catalog Number
20/16A 250V AC IEC straight blade.
H320R
For Ring Terminal connection.
H320RRT*
Note: *Not UL Listed.
H320R
1.42"
(36.1)
1.95"
(49.5)
1.36"
(34.5)
.787" min.
(20) min.
IP20
SUITABILITY
Connector
Description
Catalog Number
20/16A 250V AC IEC straight blade.
H320C
H320C
1.52"
(38.6)
1.95"
(49.5)
IP20
1.36"
(34.5)
.797"
(20)
Plug IEC 320 Compatible
SUITABILITY
Description
Catalog Number
20/16A 250V AC IEC straight blade.
H320P
H320P
.22"
(5.6)
1.47"
(37.3)
1.19"
(30.2)
1.28"
(32.5)
1.64"
(41.7)
Inlets
Description
Catalog Number
20/16A 250V AC IEC straight blade.
H320B
20/16A 250V AC IEC straight blade with retention clamp.
H320BL
Note: See page A-63 for technical information.
H320B
1.28"
(32.5)
1.47"
1.19" (37.3)
(30.2)
.22"
(5.6)
1.64"
(41.7)
H320BL
Dimensions in Inches (mm)
A-36
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
G
W
3.00"
(76.2)
Acceptor®
Hazardous Location Receptacles
20A 125V
NEMA 5-20R
UL CSA
1 HP
Description
Catalog Number
Explosion and dust ignition proof.
Class I, Div. 1 & 2, Groups C, D
Class II, Div. 1 & 2, Groups F, G
Class III
NEMA® 3, 7 B C D, 9 F G
UGRO20231
UGRA20231*
4.62"
(117.3)
UGRO20231
Note: *UGRA version includes an adapter plate for mounting to Crouse-Hinds® EDS series and Appleton® EFD series back boxes.
UL Listed for Class 1, Div. 2, Groups B, C, D.
G
W
Acceptor
Hazardous Location Plugs
®
W
Catalog Number
Explosion and dust ignition proof.
Class I, Div. 1 & 2, Groups B, C, D
Class II, Div. 1 & 2, Groups E, F, G
Class III
NEMA® 3, 7 B C D, 9 F G
UGP15231
1.51"
(38.4)
20A 125V
NEMA 5-20P
UL CSA
15A 125V
NEMA 5-15P
UL CSA
Description
2.55"
(64.8)
G
1.69"
(42.9)
UGP15231
UGP20231
3.00"
(76.2)
2.25"
(57.2)
4.63"
(117.6)
SWB Series Boxes
Hub Size
1-Gang Dead End
1-Gang Feed Thru
½ in. NPT
¾ in. NPT
Class I, Div. 1 & 2, Groups C, D
Class II, Div. 1 & 2, Groups E, F, G
Class III
NEMA® 7 C D, 9 E F G
SWB1
SWB2
SWB4
SWB5
Note: SWB series boxes will only accommodate Acceptor Series receptacles, not standard weatherproof covers.
SWB1
3.00"
(76.2)
2.25"
(57.2)
4.63"
(117.6)
SWB5
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
A-37
Straight Blade Devices
Heavy Duty Insulgrip® Plugs and Receptacles
30, 50, 60 Amp
Neoprene dust shields fit a variety of cable diameters
to provide a reliable seal to keep dust out
Heavy duty cable grips handle a wide range of
cable sizes to prevent conductor movement
that can cause strain on the terminals
Reinforced thermoplastic polyester
provides high impact and heat resistance
Supertough nylon housing
provides high impact resistance
Gripping ribs provide
secure gripping area
HBL9431C
Captive Allen head terminal
screws are user-ready
Catalog number, NEMA number,
ratings and certifications molded in face
Plated steel mounting plate
provides corrosion resistance;
Unit mounts in a 2-gang box
One piece design power
and ground contacts provide
low operating temperatures
Sequenced contacts
assure protection for
people and equipment
Four-wire receptacles: Floating “V” bottom contact
lugs bundle strands to provide high contact pressure
and low operating temperatures
HBL9430A
Catalog number, NEMA number, ratings
and certifications molded in face
Captive Allen head terminal screws permit
high torque and clamping pressure required
for larger size conductors; User-ready
A-38
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
30 Ampere, 125, 250 Volts, 277 Volts AC and 125/250 Volts
2 Pole, 3 Wire Grounding and 3 Pole, 3 Wire Non-Grounding
G
30A, 125V,
2 Pole, 3 Wire Grounding,
Receptacles and Plugs
Description
G
W
IP20
W
30A 125V
NEMA 5-30R
UL CSA
2 HP
SUITABILITY
Cord Diameter
30A 125V
NEMA 5-30P
UL CSA
2 HP
Catalog Number
Receptacle, black RTP.
–
HBL9308
Receptacle, orange, isolated ground∆.
–
IG9308
–
–
HBL9309*
Plug, nylon, angle, 4-position.
.625"-1.187"
(15.9-30.1)
–
Description
IP20
SUITABILITY
30A 250V
NEMA 6-30R
UL CSA
2 HP
Cord Diameter
HBL9330
Receptacle, orange, isolated ground∆.
–
IG9330
–
–
HBL9331*
.625"-1.187"
(15.9-30.1)
–
IP20
W
Description
3.68"
2.12" (93.47)
(53.8)
30A 277V AC
NEMA 7-30P
UL CSA
3 HP
30A 277V AC
NEMA 7-30R
UL CSA
3 HP
Cord Diameter
Catalog Number
HBL9315
–
IP20
W
W
X
2.75"
(69.9)
Y
30A 125/250V
NEMA 10-30R
UL Listed
2(2) HP
Cord Diameter
IG9308
HBL9319*
X
SUITABILITY
1.81"
(45.97)
–
–
.625"-1.187"
(15.9-30.1)
Y
30A, 125/250V,
3 Pole, 3 Wire Non-Grounding,
Receptacles and Plugs
3.28"
(83.30)
W
SUITABILITY
Receptacle, black RTP.
Plug, nylon, angle, 4-position.
2.25"
(57.15)
G
G
Description
HBL9308
Catalog Number
–
30A, 277V AC,
2 Pole, 3 Wire Grounding,
Receptacles and Plugs
2.35"
(59.93)
30A 250V
NEMA 6-30P
UL CSA
2 HP
Receptacle, black RTP.
Plug, nylon, angle, 4-position
2.38" 2.12"
(60.33) (53.84)
G
G
30A, 250V,
2 Pole, 3 Wire Grounding,
Receptacles and Plugs
1.79"
(45.64)
1.88"
(47.8)
30A 125/250V
NEMA 10-30P
UL Listed
2(2) HP
4.33"
(110.0)
Catalog Number
Receptacle, black phenolic.
–
HBL9350
–
Receptacle, surface mount
aluminum housing.
–
HBL9395
–
Plug, Insulgrip®, nylon.
.625"-1.00"
(15.9-25.4)
–
HBL9337C
Plug, nylon, angle, 4-position.
.625"-1.187"
(15.9-30.1)
–
HBL9333
HBL9331
2.50"
(63.5)
Note: RTP is an abbreviation for reinforced thermoplastic polyester.
∆
See section M for additional information on isolated ground devices..
*Not Fed. Spec. Listed.
See page A-48 for accessories.
2.75"
(69.9)
2.13"
(54.1)
5.06"
(128.5)
1.88"
(47.8)
4.33"
(110.0)
2.50" 2.09"
(63.5) (53.1)
1.69"
(42.9)
HBL9333
HBL9350
2.06"
(52.3)
HBL9395
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-39
Straight Blade Devices
30 Ampere, 125/250 Volts, 3Ø 250 and 3ØY 120/208 Volts AC
3 Pole, 4 Wire Grounding and 4 Pole, 4 Wire Non-Grounding
G
G
Y
2.75"
(69.9)
1.81"
(46.0)
1.81"
(46.0)
#6-32
TAP
30A, 125/250V,
3 Pole, 4 Wire Grounding,
Receptacles and Plugs
SUITABILITY
30A 125/250V
NEMA 14-30R
2(2) HP
Description
Cord Diameter
Catalog Number
IP20
3.28"
(83.3)
2.37"
(60.3)
X
Y
W
W
30A 125/250V
NEMA 14-30P
2(2) HP
–
HBL9430A
–
Plug, nylon.
.625"-1.310"
(15.9-33.3)
–
HBL9431C
Plug, nylon, angle, 4-position.
.625"-1.310"
(15.9-33.3)
–
HBL9432C
Receptacle, black RTP.
2.44"
(61.9)
X
HBL9430A
G
30A, 3Ø 250V AC,
3 Pole, 4 Wire Grounding,
Receptacles and Plugs
2.88"
(73.2)
4.13"
(104.9)
Description
IP20
Cord Diameter
3.38"
(85.8)
X
Z
Y
Y
30A 3Ø 250V AC
NEMA 15-30R
3 HP
30A 3Ø 250V AC
NEMA 15-30P
3 HP
Catalog Number
–
HBL8430A
–
Plug, nylon.
.625"-1.310"
(15.9-33.3)
–
HBL8431C
Plug, nylon, angle, 4-position
.625"-1.310"
(15.9-33.3)
–
HBL8432C
Receptacle, black RTP.
HBL9431C
X
Z
SUITABILITY
G
4.5"
(114.3)
W
HBL9432C
#6-32
TAP
Z
2.37"
(60.2)
Description
IP20
SUITABILITY
Cord Diameter
Plug, nylon.
2.37" 3.28"
(60.3) (83.3)
Z
30A 3ØY
120/208V AC
NEMA 18-30R
UL Listed
3 HP
Y
30A 3ØY
120/208V AC
NEMA 18-30P
UL Listed
3 HP
Catalog Number
–
HBL8330A
–
.625"-1.310"
(15.9-33.3)
–
HBL8331C
Receptacle, black RTP.
2.44"
(61.9)
X
Y
30A, 3ØY 120/208V AC,
4 Pole, 4 Wire Non-Grounding,
Receptacles and Plugs
2.75"
(69.9)
1.81"
(46.0)
W
X
Note: RTP is an abbreviation for reinforced thermoplastic polyester.
See page A-64 for technical information.
See page A-49 for accessories.
HBL8330A
4.13"
(104.9)
2.88"
(73.2)
HBL8331C
Dimensions in Inches (mm)
A-40
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
50 Ampere, 125, 250 Volts, 277 Volts AC and 125/250 Volts
2 Pole, 3 Wire Grounding and 3 Pole, 3 Wire Non-Grounding
G
G
W
50A, 125V,
2 Pole, 3 Wire Grounding,
Receptacles and Plugs
Description
IP20
SUITABILITY
Cord Diameter
50A 125V
NEMA 5-50R
UL CSA
2 HP
50A 125V
NEMA 5-50P
UL CSA
2 HP
2.75"
(69.9)
Catalog Number
–
HBL9360
–
.625"-1.187"
(15.9-30.2)
–
HBL9361
Receptacle, black RTP.
Plug, nylon, angle, 4-position.
W
4.33"
(110.0)
1.88"
(47.8)
G
50A, 250V,
2 Pole, 3 Wire Grounding,
Receptacles and Plugs
Description
IP20
SUITABILITY
Cord Diameter
50A 250V
NEMA 6-50R
UL CSA
3 HP
HBL9361
50A 250V
NEMA 6-50P
UL CSA
3 HP
Catalog Number
–
HBL9367
–
.625"-1.187"
(15.9-30.2)
–
HBL9368
Receptacle, black RTP.
Plug, nylon, angle, 4-position.
G
2.50" 2.09"
(63.5) (53.1)
1.69"
(42.9)
G
50A, 277V AC,
2 Pole, 3 Wire Grounding,
Receptacles and Plugs
Description
IP20
SUITABILITY
Cord Diameter
W
2.13"
(54.1)
5.06"
(128.5)
Catalog Number
–
.625"-1.187"
(15.9-30.2)
–
HBL9379
50A, 125/250V,
3 Pole, 3 Wire Non-Grounding,
Receptacles, Connector Body and Plugs
SUITABILITY
Cord Diameter
Y
2.50"
(63.5)
50A 277V AC
NEMA 7-50P
UL CSA
5 HP
HBL9365
IP20
Description
W
50A 277V AC
NEMA 7-50R
UL CSA
5 HP
–
Receptacle, black RTP.
Plug, nylon, angle, 4-position.
HBL7962
G
W
X
W
2.06"
(52.3)
Y
Representative of surface
mount receptacle
HBL9395
X
50A 125/250V
NEMA 10-50R
UL Listed
3(2) HP
50A 125/250V
NEMA 10-50P
UL Listed
3(2) HP
5.75"
(146.1)
Catalog Number
Receptacle, black phenolic.
–
HBL7962
–
Receptacle, surface mount
aluminum housing.
–
HBL7940
–
Connector body,
Insulgrip, nylon.
.625"-1.218"
(15.9-30.9)
HBL7515C
–
Plug, Insulgrip, nylon.
.625"-1.218"
(15.9-30.9)
–
HBL7513C
Plug, nylon, angle, 4-position.
.625"-1.187"
(15.9-30.2)
–
HBL7977
Note: RTP is an abbreviation for reinforced thermoplastic polyester.
See page A-48 for accessories.
2.88"
(73.2)
HBL7515C
4.13"
(104.9)
2.88"
(73.2)
HBL7513C
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-41
Straight Blade Devices
50 Ampere, 125/250 Volts, 3Ø 250 and 120/208 Volts AC
3 Pole, 4 Wire Grounding and 4 Pole, 4 Wire Non-Grounding
G
G
Y
2.75"
(69.9)
1.81"
(46.0)
1.81"
(46.0)
#6-32
TAP
50A, 125/250V,
3 Pole, 4 Wire Grounding,
Receptacles and Plugs
Description
IP20
SUITABILITY
Cord Diameter
3.28"
(83.3)
2.37"
(60.3)
X
Y
W
W
50A 125/250V
NEMA 14-50R
UL CSA
3(2) HP
50A 125/250V
NEMA 14-50P
UL CSA
3(2) HP
Catalog Number
–
HBL9450A
–
Plug, nylon.
.625"-1.310"
(15.9-33.3)
–
HBL9451C
Plug, nylon, angle, 4-position.
.625"-1.310"
(15.9-33.3)
–
HBL9452C
Receptacle, black RTP.
2.44"
(61.9)
X
HBL9450A
G
G
Z
4.13"
(104.9)
Description
2.88"
(73.2)
IP20
SUITABILITY
Cord Diameter
50A 3Ø 250V AC
NEMA 15-50R
UL CSA
7.5 HP
Catalog Number
HBL8450A
–
–
HBL8451C
Plug, nylon, angle, 4-position.
.625"-1.310"
(15.9-33.3)
–
HBL8452C
W
W
Z
Y
50A, 3ØY 120/208V AC,
4 Pole, 4 Wire Non-Grounding,
Receptacles and Plugs
Description
IP20
SUITABILITY
Cord Diameter
#6-32
TAP
1.81"
(46.0)
1.81"
(46.0)
Plug, nylon, angle, 4-position.
X
50A 3ØY
120/208V AC
NEMA 18-50R
UL Listed
7.5 HP
X
Z
Y
50A 3ØY
120/208V AC
NEMA 18-50P
UL Listed
7.5 HP
Catalog Number
–
HBL8350A
–
.625"-1.310"
(15.9-33.3)
–
HBL8352C
Receptacle, black RTP.
2.75"
(69.9)
50A 3Ø 250V AC
NEMA 15-50P
UL CSA
7.5 HP
.625"-1.310"
(15.9-33.3)
4.5"
(114.3)
HBL9452C
Y
Plug, nylon.
3.38"
(85.8)
2.38"
(60.5)
Z
X
–
Receptacle, black RTP.
HBL9451C
X
Y
50A, 3Ø 250V AC,
3 Pole, 4 Wire Grounding,
Receptacles and Plugs
Note: RTP is an abbreviation for reinforced thermoplastic polyester.
See page A-49 for accessories.
3.28"
(83.3)
2.37"
(60.3)
2.44"
(61.9)
HBL8350A
Dimensions in Inches (mm)
A-42
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
60 Ampere, 125/250 Volts, 3Ø 250 and 120/208 Volts AC
3 Pole, 4 Wire Grounding and 4 Pole, 4 Wire Non-Grounding
G
G
Y
60A, 125/250V,
3 Pole, 4 Wire Grounding,
Receptacles and Plugs
SUITABILITY
Description
Cord Diameter
Receptacle, black RTP.
Plug, nylon.
Plug, nylon, angle, 4-position.
IP20
X
X
Y
W
W
60A 125/250V
NEMA 14-60R
UL CSA
3(2) HP
60A 125/250V
NEMA 14-60P
UL CSA
3(2) HP
Catalog Number
2.75"
(69.9)
1.81"
(46.0)
#6-32
TAP
–
HBL9460A
–
.625"-1.310"
(15.9-33.3)
–
HBL9461C
.625"-1.310"
(15.9-33.3)
–
HBL9462C
1.81"
(46.0)
3.28"
(83.3)
2.37"
(60.3)
2.44"
(61.9)
HBL9460A
G
60A, 3Ø 250V AC,
3 Pole, 4 Wire Grounding,
Receptacles and Plugs
Description
IP20
SUITABILITY
Cord Diameter
Z
G
X
X
Y
60A 3Ø 250V AC
NEMA 15-60P
UL CSA
10 HP
Catalog Number
2.88"
(73.2)
–
HBL8460A
–
Plug, nylon.
.625"-1.310"
(15.9-33.3)
–
HBL8461C
Plug, nylon, angle, 4-position.
.625"-1.310"
(15.9-33.3)
–
HBL8462C
Receptacle, black RTP.
4.13"
(104.9)
Z
Y
60A 3Ø 250V AC
NEMA 15-60R
UL CSA
10 HP
HBL9461C
3.38"
(85.8)
4.5"
(114.3)
W
Z
60A, 3ØY 120/208V AC,
4 Pole, 4 Wire Non-Grounding,
Receptacles and Plugs
SUITABILITY
Description
Cord Diameter
IP20
W
X
X
Y
60A 3ØY
120/208V AC
NEMA 18-60R
UL Listed
7.5 HP
Y
Z
60A 3ØY
120/208V AC
NEMA 18-60P
UL Listed
7.5 HP
2.75"
(69.9)
Catalog Number
–
HBL7301A
–
Plug, nylon.
.625"-1.310"
(15.9-33.3)
–
HBL7303C
Plug, nylon, angle, 4-position.
.625"-1.310"
(15.9-33.3)
–
HBL7302C
Receptacle, black RTP.
HBL9462C
#6-32
TAP
2.38"
(60.5)
1.81"
(46.0)
1.81"
(46.0)
3.28"
(83.3)
2.37"
(60.3)
2.44"
(61.9)
Note: RTP is an abbreviation for reinforced thermoplastic polyester.
See page A-49 for accessories.
HBL7301A
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-43
Straight Blade Devices
DIN Rail Utility Box
Complete Units and Component Parts
Hubbell’s DIN Rail Utility Box offers a labor saving way to provide utility power to any control cabinet. Installing the DIN Rail
Utility Box is as easy as snapping the box onto a 35mm DIN Rail and connecting the line, neutral and ground wires to the
terminal block. Utility power for fans, lights, laptop computers, testers or any other power requirement. If load limiting is a
concern, Hubbell’s “CB” version comes with a 5 Amp circuit breaker that provides over-current protection to make sure that
large loads are not drawn from the DIN Rail Utility Box. All Hubbell DIN Rail Utility Boxes may be mounted either vertically or
horizontally on the DIN Rail; the “H” version comes with the terminal block mounted for easy wiring when the DIN Rail Utility
Box is mounted horizontally.
2.54"
(64.5)
3.31"
(84.1)
4.97"
(126.2)
DRUB15
2.54"
(64.5)
3.31"
(84.1)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Duplex Receptacles
20A 125V
NEMA 5-20R
UL CSA
1 HP
Description
Color
Catalog Number
Complete unit.
Complete unit, horizontal mount.
Complete unit with 5A circuit breaker.
Complete unit with 5A circuit breaker, horizontal.
Complete unit with aux.
Complete unit with aux and 5A circuit breaker.
Complete unit with NEMA® 6-20R duplex (250V).
Gray
Gray
Gray
Gray
Gray
Gray
Gray
DRUB15
DRUB15H
DRUB15CB5
DRUB15HCB5
–
–
–
DRUB20
–
–
–
DRUB20AC
DRUB20ACCB5
DRUB5462*
GFCI Duplex Receptacles
4.97"
(126.2)
DRUBGFI15AC
2.54"
(64.5)
3.31"
(84.1)
DRUBTVSS15
DRUBIG15
3.31"
(84.1)
4.97"
(126.2)
HIDRUBCKIT
Dimensions in Inches (mm)
A-44
Catalog Number
Gray
Gray
Gray
Gray
Gray
Gray
DRUBGFI15
DRUBGFI15H
DRUBGFI15CB5
DRUBGFI15HCB5
DRUBGFI15AC
–
DRUBGFI20
–
–
–
DRUBGFI20AC
DRUBGFI20BFAC
Description
Color
Catalog Number
Complete unit.
Gray
DRUBTVSS15
–
Isolated Ground∆ Duplex Receptacles
Description
Color
Catalog Number
Complete unit.
Gray
DRUBIG15
–
Toggle Switch Unit
3.31"
(84.1)
4.97"
(126.2)
3.10"
(78.7)
Color
Complete unit.
Complete unit, horizontal.
Complete unit with 5A circuit breaker.
Complete unit with 5A circuit breaker, horizontal.
Complete unit with aux GFCI contacts.
Complete unit, faceless with aux GFCI contacts.
TVSS Duplex Receptacles
4.97"
(126.2)
2.54"
(64.5)
Description
Description
Color
Catalog Number
Complete unit with HBL1221.
Complete unit with 15A 125V SW/REC.
Gray
Gray
DRUB1221AC
DRUB6404
Description
Color
Catalog Number
Pre-wired kit without circuit breaker.
Pre-wired kit with circuit breaker.
Pre-wired kit with aux.
Pre-wired kit with circuit breaker and aux.
Communications kit (unloaded).
(For use with Network Wiring frames in section W).
Gray
Gray
Gray
Gray
Gray
DRUBKIT
DRUBKITCB5
DRUBKITAC
DRUBKITACCB5
HIDRUBCKIT
Switch plate only.
Rectangular opening plate only.
1.60 in. opening plate only.
1.40 in. opening plate only.
Duplex receptacle plate only.
Gray
Gray
Gray
Gray
Gray
KP1GY**
KP26GY**
KP720GY**
KP7GY**
KP8GY**
DIN Rail Utility Box Components
Note: ∆See section M for additional information on isolated ground devices.
*DRUB5462 configuration not pictured.
**UL Listed, CSA Certified.
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
Miscellaneous and Combination Receptacles
2 Pole, 3 Wire Grounding
G
W
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Miscellaneous Receptacles
Description
Catalog Number
Receptacle, display type, brown phenolic with .060 in. brass plate and
blank flush plug.
HBL5236
Replacement receptacle for HBL5236.
HBL5236M2
Replacement threaded plug for HBL5236.
HBL5236PLUG*
Receptacle, wooden floors, brown phenolic with .060 in. brass plate,
blank flush plug and box.
HBL6236
Receptacle, clock hanger, brown with stainless steel plate.
HBL5235
Four outlet cluster, brown phenolic, steel cover, swivel hook.
Cord grip range .296–.562 in. (7.5–14.3) cord not supplied.
HBL9259*
HBL5236
Note: *Not UL Listed or CSA certified.
HBL5235
Special Combination Duplex Receptacles
Description
Catalog Number
Brown RTP, 1 feed, 1 return, back/side wired
HBL4792
Brown RTP, 2 feeds, 1 return, side wired
HBL4794
15A, 125V
Brown RTP, 2 feeds, 2 returns, side wired
HBL4795
15A, 250V
Brown nylon face, 2 circuit, back and side wired
HBL5292
15A, 125V
Ivory nylon face, 2 circuit, back and side wired
HBL5292I
20A, 250V
Brown nylon face, 2 circuit, back and side wired
HBL5492
Ivory nylon face, 2 circuit, back and side wired
HBL5492I
Brown RTP, 2 feeds, 1 return, common ground
HBL7371
15A, 125V
3.00"
(76.2)
3.69"
(93.7)
2.00"
(50.8)
HBL9259
1.50"
(38.1)
20A, 125V
15A, 125V
10A, 250V
15A, 125V
20A, 125V
2.75"
(69.9)
3.28"
(83.3)
HBL5392
Brown nylon, side and back wired
.88"
(22.4)
HBL5292
20A, 125V
Note: This device will only accept 20A grounding plugs.
Note: RTP is an abbreviation for reinforced thermoplastic polyester.
*Not UL Listed or CSA certified.
See page A-46 for accessories.
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-45
Straight Blade Devices
Accessories
For 15 and 20 Ampere, 125 and 250 Volts and 277 Volts AC Devices
Wallplates, 1-Gang
Description
Color
Duplex
Receptacles
Catalog Number
Nylon, smooth.
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Orange
Red
White
NP8AL
NP8BK
NP8
NP8GY
NP8I
NP8LA
NP8OW
NP8OR
NP8R
NP8W
NP26AL
NP26BK
NP26
NP26GY
NP26I
NP26LA
NP26OW
–
NP26R
NP26W
NP7AL
NP7BK
NP7
NP7GY
NP7I
NP7LA
NP7OW
–
NP7R
NP7W
Stainless steel 302/304, .035 in. (0.9)
horizontal brushed finish.
SS8
SS26
SS7
Brass .04 in. (1.0),
horizontal brushed finish.
SB8
SB26
SB7
Aluminum .05 in. (1.3),
horizontal brushed finish.
SA8
NP8
NP26I
SS7
HBL52CM22
Single Receptacle Plate
1.40 in. (35.6) Dia.
Catalog Number
–
SA7
Weatherproof Covers
Duplex
Receptacles
Catalog Number
Description
HBL5206WO
Style Line®
Receptacles
Catalog Number
Single Receptacle Plate
1.40 in. (35.6) Dia.
Catalog Number
RTP, gray, for FS/FD box mounting.
HBL5221
HBL7423WO
RTP, yellow, for FS/FD box mounting.
HBL52CM21
HBL74CM23WO
RTP, gray, for device mounting.
HBL5222
RTP, yellow, for device mounting.
HBL52CM22
–
Cast aluminum for FS/FD box mounting.
HBL5206WO
HBL7420
Cast aluminum for device mounting.
HBL5205WO
–
–
Note: All weatherproof plates are UL Listed for Wet Locations.
Those with suffix WO are listed for use with cover open, all others with cover closed.
RTP is an abbreviation for reinforced thermoplastic polyester.
See section N for additional information on cover plates.
HBL7423WO
A-46
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
Accessories
For 15 and 20 Ampere, 125 and 250 Volts and 277 Volts AC Devices
IP44
SUITABILITY
Weatherproof Covers
For Nylon Flanged Inlets and Flanged Receptacles
Description
Catalog Number
RTP, gray, for FS/FD box mounting.
WP1
Note: RTP is an abbreviation for reinforced thermoplastic polyester.
See page N-23 for additional information on weatherproof covers.
WP1
IP55*
SUITABILITY
Weatherproof Boots
Description
Catalog Number
HBL6017
HBL6017
Seal-Tite triple seal, black elastomer cover for Insulgrip plugs
(HBL5266C style), when used in a cord set, and connector
bodies (HBL5269C style), when used with flanged inlets.
®
®
Same as above except yellow.
HBL60CM17
Seal-Tite® triple seal black elastomer cover for Insulgrip®
connector bodies when used in a cord set.
HBL6018
Same as above except yellow.
HBL60CM18
Closure plug, black.
HBL6019
Closure plug, yellow.
HBL60CM19
HBL6018
Note: *IP55 when installed and used properly with mating components.
Boots are not UL Listed or CSA Certified.
HBL60CM19
Shown with HBL6018
3.14"
(79.8)
PLUGOUT® Device
Description
Catalog Number
Electrical plug lockout devices for 15 and 20A straight blade plugs.
HLDMP**
PLUGOUT® Lockout device for 20 and 30A Hubbell plugs and others.
HLD**
4.22"
(107.2)
Note: **Not UL Listed or CSA Certified.
See section Z for additional information on lockout devices.
HLDMP
4.27"
(108.5)
Inserts
Description
Catalog Number
Replacement cord grip inserts for Valise® device, (bag of 40).
HBLVCGBK**
7.27"
(184.7)
Note: **Not UL Listed or CSA Certified.
HLD
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-47
Straight Blade Devices
Accessories
For 3 Wire 30 and 50 Ampere, 125 and 250 Volts and 277 Volts AC
Wallplates
SS723
Description
Color
Single Receptacle Plate
2.16 in. (54.9) Dia.
Catalog Number
Nylon, smooth, 1-gang.
Black
NP724BK
Nylon, smooth, 2-gang.
Black
NP703BK
Aluminum, .05 in. (1.3), 1-gang,
smooth horizontal brushed finish.
SA723
Stainless steel 302/304, .035 in. (0.9), 1-gang,
smooth horizontal brushed finish.
SS723
Stainless steel 302/304, .035 in. (0.9), 2-gang,
smooth horizontal brushed finish.
SS703
IP44
SUITABILITY
SS703
Weatherproof Lift Covers
Description
Catalog Number
Cast aluminum for FS/FD box mounting for 30A.
HBL9420
Cast aluminum for FS/FD box mounting for 50A.
HBL9425
HBL9420
PLUGOUT® Device
6.31"
(160.3)
Description
Catalog Number
Electrical plug lockout device for 30, 50 and 60A devices.
HLD2
Note: See section Z for additional information on lockout devices.
12.5"
(317.5)
HLD2
Dimensions in Inches (mm)
A-48
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
Accessories
For 4 Wire 30, 50 and 60 Ampere, 125/250 Volts, 3Ø 250 and 3ØY 120/208 Volts AC
Wallplates, 2-Gang
Description
Single Receptacle Plate
2.48 in. (63.0) Dia.
Catalog Number
Brass .04 in. (1.0), brushed, smooth.
SB701
Stainless steel 302/304, .035 in. (0.9),
smooth horizontal brushed finish.
SS701
SS701
IP44
SUITABILITY
Weatherproof Lift Covers
Description
Catalog Number
RTP, gray, lift cover plate. Will fit FS/FD boxes having plate mounting
hole 3.25 in. x 3.75 in. (82.5 x 95.2), centers. Only for use with
receptacles on pages A-40 to A-43 with “A" suffix.
HBL7777A
Same as above except yellow.
HBL77CM77A
Note: RTP is an abbreviation for reinforced thermoplastic polyester.
HBL7777A
6.31"
(160.3)
PLUGOUT® Device
Description
Catalog Number
Electrical plug lockout device for 30, 50 and 60A devices.
HLD2
Note: See section Z for additional information on lockout devices.
12.5"
(317.5)
HLD2
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-49
Straight Blade Devices
Technical Information
HBL® Extra Heavy Duty, Straight Blade
Hospital Grade Duplex Receptacles
HBL8200GY
Specifications
Receptacles
Part
Description
Typical Specification – Catalog No. HBL8200
Manufacturer’s Identification – Hubbell HBL8200
Description – Hospital Grade, Straight Blade Duplex Receptacle
Type – 2 Pole, 3 Wire, Grounding
Rating – 15A, 125V
Certification: UL Listed to UL 498 File E2186, Fed. Spec. WC596,
Hospital Grade, NEMA® WD-6 Compliant
Certified to CSA, C22.2, No. 42 File 285
Receptacle
Top
Base
By-Pass Power Contacts
Clamping Plate
Mounting Strap
Line Terminal Screws
Hex Head Grounding Screw
Center Assembly Rivet
Automatic Self-Grounding Clip
Flat Head Mounting Screws
15A
PBT*
RTP**
.037 in. (.9) Brass – Nickel Finish
.031 in. (.8) Brass – Nickel Finish
.050 in. (1.3) Brass – Nickel Finish
#10-32 Silicone Bronze, Multiple Drive
#10-32 (Green) Silicon Bronze, Multiple Drive
Silicon Bronze
Stainless Steel
Stainless Steel
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Terminals identified in accordance with UL 498 and CSA (Brass, White, Green).
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Environmental – Material
Flammability
Operating Temperature
UL 94V-0 and UL 94-5 VA.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Note: *Polybutylene Terephthalate.
**Reinforced Thermoplastic Polyester.
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
A-50
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
Technical Information
HBL® Extra Heavy Duty, Straight Blade
Specification Grade Duplex Receptacles
HBL5262
Specifications
Receptacles
Part
Description
Typical Specification – Catalog No. HBL5262
Manufacturer’s Identification – Hubbell HBL5262
Description – Heavy Duty Straight Blade Duplex Receptacle
Type – 2 Pole, 3 Wire, Grounding
Rating – 15A, 125V
Certification: UL Listed to UL498 File E2186, Guide RTRT
Fed. Spec. WC596, Meets NEMA® WD-6 Compliant
Certified to CSA, C22.2, No. 42 File 285
Receptacle
Top
Base
By-Pass Power Contacts
Wire Clamps
Mounting Strap
Line Terminal Screws
Ground Screw
Center Assembly Rivet
Automatic Self-Grounding Clip
Flat Head Mounting Screws
Ground Tension Clips
15A
Nylon
RTP*
.037 in. (.9) Brass
.031 in. (.8) Brass
.050 in. (1.3) Brass
#10-32 Brass, Multiple Drive
#10-32 Brass, Multiple Drive (Green)
Brass
Stainless Steel
Steel-Zinc Plated
Steel-Nickel Finish
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Terminals identified in accordance with UL 498 and CSA (Brass, White, Green).
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Environmental – Material
Flammability
Operating Temperature
Top: UL 94V-2.
Base: UL 94V-0 and UL 94-5 VA.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Note: *Reinforced Thermoplastic Polyester.
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-51
Straight Blade Devices
Technical Information
HBL® Compact Extra Heavy Duty,
Specification Grade Receptacles
HBL5252
Specifications
Receptacles
Part
Description
Typical Specification – Catalog No. HBL5252
Manufacturer’s Identification – Hubbell HBL5252
Description – Straight Blade Duplex Receptacle
Type – 2 Pole, 3 Wire, Grounding
Rating – 15A, 125V
Certification – UL Listed to UL 498 File E2186,
Fed. Spec. WC596, Certified to CSA 22.2, No. 42 File 285
Receptacle
Top
Base
Triple Wipe Power Contacts
Wire Clamps
Mounting Strap
Line Terminal Screws
Ground Screw
Center Assembly Rivet
Automatic Self-Grounding Clip
Flat Head Mounting Screws
15A
Nylon
RTP*
.032 in. (.8) Brass
.062 in. (1.8) Steel
.050 in. (1.3) Brass
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive (Green)
Brass
Stainless Steel
Steel-Zinc Plated
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Terminals identified in accordance with UL 498 (Brass, White, Green).
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Environmental – Material
Flammability
Operating Temperature
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Note: *Reinforced Thermoplastic Polyester.
Please consult the factory for product dimensions and specifications of other products listed in this catalog.
A-52
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
Technical Information
HBL® Compact Heavy Duty Style Line®, Specification Grade
and Hospital Grade Straight Blade Duplex Receptacles
HBL2152
Specifications
HBL2172
Receptacle
Part
Description
Typical Specification – Catalog No. HBL2152
Manufacturer’s Identification – Hubbell HBL2152 Receptacle
Description – Straight Blade Duplex Receptacle
Type – 2 Pole, 3 Wire Grounding
Rating – 15A, 125V
Certification – UL File No. E2186
Certified to CSA File No. 285
Receptacle
Top
Base
Triple Wipe Power Contacts
Wire Clamp
Mounting Strap
Ground Contact
Line Terminal Screws
Ground Screw
Center Assembly Staple
Automatic Self-Grounding Staple
Mounting Screws
15A
Nylon
Nylon
.031 in. (.8) Brass
.062 in. (1.8) Steel-Nickel Finish
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive
.040 in. (1) Steel (Galvanized)
Stainless Steel
Zinc Plated Steel
Receptacle
Part
Description
Typical Specification – Catalog No. HBL2172
Manufacturer’s Identification – Hubbell HBL2182 Receptacle
Description – Straight Blade Duplex Receptacle
Type – 2 Pole, 3 Wire Grounding
Rating – 15A, 125V
Certification – UL listed to UL498 File E2186,
Fed. Spec. WC596, Certified to CSA File No. 285
Receptacle
Top
Base
Triple Wipe Power Contacts
Wire Clamp
Mounting Strap
Ground Contact
Line Terminal Screws
Ground Screw
Center Assembly Staple
Automatic Self-Grounding Staple
Mounting Screws
15A
Nylon
RTP*
.031 in. (.8) Brass
.062 in. (1.8) Steel-Nickel Finish
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive
.040 in. (1) Steel (Galvanized)
Stainless Steel
Zinc Plated Steel
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Terminals identified in accordance with UL 498 and CSA (Brass, White, Green).
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Environmental – Material
Flammability
Operating Temperature
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Note: *Reinforced Thermoplastic Polyester.
Please consult the factory for product dimensions and specifications of other products listed in this catalog.
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-53
Straight Blade Devices
Technical Information
SNAPConnect® Straight Blade Duplex Receptacles
Specification Grade and Hospital Grade
SNAP8200WA
Specifications
SNAP2182A
SNAP5362IA
Receptacle
Part
Description
Typical Specification – Catalog No. SNAP8200
Manufacturer’s Identification – Hubbell SNAP8200
Description – Straight Blade Duplex Receptacle
Type – 2 Pole, 3 Wire, Grounding
Rating – 15A, 125V
Certification – UL Listed to UL 498
Fed. Spec. WC596, Certified to CSA 22.2, No. 42
Receptacle
Top
Base
Triple Wipe Power Contacts
Mounting Strap
Automatic Self-Grounding Clip
Flat Head Mounting Screws
15A
Nylon
Nylon
Brass
Galvanized Steel; Brass (HG)
Stainless Steel
Steel-Zinc Plated/Self Tapping
Connector
Contact
Connector Body
Wire
SNAP1RA
SNAP2RA
Brass
Brass
Clear Polycarbonate
Clear Polycarbonate
6" Solid copper #12 AWG THHN/THWN-2 600V, T90 Nylon FT-1, PVC 90°C (min).
6" Stranded copper #12 AWG THHN/THWN-2 600V, T90 Nylon FT-1, PVC 90°C (min).
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Withstands 2,000V minimum.
125V as rated.
Receptacle certified for current interrupting at full rated current with equivalently
rated NEMA® plug.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated DC current.
Temperature Rise
Mechanical
Terminal Wire Leads Identification
Product Identification
Terminal wire leads identified in accordance with UL 498 (Black, White, Green).
Ratings are a permanent part of the device.
Environmental – Material
Flammability
Operating Temperature
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (without impact).
Dimensions
GREEN DOT ON
HOSPITAL GRADE ONLY
2.63"
(66.73)
.86"
(21.92)
.24"
(6.10)
1.64"
(41.77)
1.25"
(31.8)
3.28"
(83.34)
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
A-54
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
Technical Information
Hubbell-PRO Heavy Duty, Straight Blade
Hospital Grade Duplex Receptacles
8200REDLTR
Specifications
2182IVLTR
Receptacle
Part
Description
Typical Specification - Catalog No. 8200
Manufacturer's Identification - Hubbell-Pro 8200
Description - Straight Blade Hospital Grade Duplex Receptacle
Type - 2 Pole, 3 Wire, Grounding
Rating - 15A, 125V
Certification - UL listed to UL 498, Fed Spec WC596
Hospital Grade, NEMA® WD-6 Compliant
Certified to CSA
Receptacle
Top
Base
Triple Wipe Power Contacts
Clamping Plate
Mounting Strap
Terminal Screws
Hex Head Grounding Screw
Automatic Self-Grounding Staple
Mounting Screws
15A
Nylon
Nylon
.0295" Brass
Plated Steel
.040" Galvalized Steel
Plated Steel
Plated Steel
Stainless Steel
Zinc Plated Steel
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Terminals identified in accordance with UL 498 and CSA (Brass, White, Green)
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Environmental – Material
Flammability
Operating Temperature
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-55
USB Charger Tamper-Resistant, Straight Blade
Hospital Grade and Specification Grade Duplex Receptacles
USB8300R
Specifications
USB15X2W
USB Charger Receptacle
Part
Description
Typical Specification - Catalog No. USB8300
Manufacturer's Identification - Hubbell USB8300
USB Charger
Charger Receptacle
USB 3 Amp 5VDC, Electrical 15A or 20A 125V
Ports
LED
Top
Base
Triple Wipe Power Contacts
Clamping Plate
Mounting Strap
Terminal Screws
Hex Head Grounding Screw
Automatic Self-Grounding Staple
Mounting Screws
Type A, 2.0
Green Indicator
Nylon
Nylon
.030" Cooper Alloy
Plated Steel
.040" Galvanized Steel
Plated Steel
Plated Steel
Stainless Steel
Zinc Plated Steel
Receptacle
Description - Hospital Grade, Straight Blade Duplex Receptacle
Type - 2 Pole, 3 Wire, Grounding
Rating - 15A, 125V
Certification – cULus listed to UL498 and UL1310
Hospital Grade, NEMA® WD-6 Compliant (USB8200
and 8300 series only)
Complies with battery charging specification USB BC 1.2
Complies with Part 15 of the FCC rules
Compatible with SUB 1.1/2.0/3.0 devices, including Apple products
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
USB Port
Terminal Identification
Terminal Accommodation
Product Identification
Circuit Feed-Through
Stainless Steel Rated for 10,000 plug insertions and removal
Terminals identified in accordance with UL 498 and CSA (Brass, White, Green)
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
20 Amp 125 Volt
Environmental – Material
Flammability
Operating Temperature
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
A-56
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hubbell-PRO Heavy Duty, Straight Blade
Specification Grade Duplex Receptacles
5252A
Specifications
5262
Receptacle, Smooth Nylon Face
Part
Description
Typical Specification – Catalog No. 5252A
Manufacturer’s Identification – Hubbell 5252A Receptacle
Description – Straight Blade Duplex Receptacle
Type – 2 Pole, 3 Wire Grounding
Rating – 15A, 125V
Certification – UL File No. E2186
Certified to CSA File No. 285
Receptacle
Top
Base
Triple Wipe Power Contacts
Wire Clamp
Mounting Strap
Ground Contact
Line Terminal Screws
Ground Screw
Center Assembly Staple
Automatic Self-Grounding Staple
Mounting Screws
15A
Nylon
RTP*
.031 in. (.8) Brass
.062 in. (1.8) Steel-Nickel Finish
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive
.040 in. (1) Steel (Galvanized)
Stainless Steel
Zinc Plated Steel
Receptacle, Finder Groove Face
Part
Description
Typical Specification – Catalog No. 5262
Manufacturer’s Identification – Hubbell 5262 Receptacle
Description – Straight Blade Duplex Receptacle
Type – 2 Pole, 3 Wire Grounding
Rating – 15A, 125V
Certification – UL listed to UL498 File E2186,
Fed. Spec. WC596, Certified to CSA C22.2, No. 42
Receptacle
Top
Base
Triple Wipe Power Contacts
Wire Clamp
Mounting Strap
Ground Contact
Line Terminal Screws
Ground Screw
Center Assembly Staple
Automatic Self-Grounding Staple
Mounting Screws
15A
Nylon
RTP*
.031 in. (.8) Brass
.062 in. (1.8) Steel-Nickel Finish
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive
.040 in. (1) Steel (Galvanized)
Stainless Steel
Zinc Plated Steel
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Terminals identified in accordance with UL 498 and CSA (Brass, White, Green)
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Environmental – Material
Flammability
Operating Temperature
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Note: *Reinforced Thermoplastic Polyester.
Please consult the factory for product dimensions and specifications of other products listed in this catalog.
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-57
Straight Blade Devices
Technical Information
Commercial Specification Grade
Receptacles with Wire Leads
CR15ALP1
Specifications
DR15GRYP1
Part
Top
Base
Double Wipe Power Contacts
Nylon
Nylon
.030 in. (.8) Brass
Finish
Mounting Strap
Ground Contact
Line Terminal Screws
Ground Screw
Wire Leads
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
–
–
8" Solid or Stranded copper #12 AWG THHN/THWN-2 600V, T90 nylon FT-1,
PVC 90°C (min)
Stainless Steel
Zinc Plated Steel
Automatic Self-Grounding Staple
Mounting Screws
Certification
UL Listed
Fed. Spec.
Certified to CSA
UL498
WC596*
C22.2, No. 42
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 100 cycles of overload at
150% of rated current.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
–
–
Ratings are a permanent part of the device.
Environmental – Material
Flammability
Operating Temperature
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Note: *Decorator and Commercial Tamper-Resistant devices are not Fed. Spec. Listed.
A-58
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
Technical Information
Commercial Specification
Grade Receptacles
CRF15I
BR15LA
DR20I
CR20TR
DR20GRYWR
Specifications
Part
Standard
Weather Resistant
Top
Base
Double Wipe Power Contacts
Wire Clamp
Nylon
Nylon
.030 in. (.8) Brass
.062 in. (1.6) Steel-Nickel Plated
Nylon (UV Rated)
Nylon
.030 in. (.8) Brass
.062 in. (1.6) Steel-Nickel Plated
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Plated Steel, Multiple Drive
#8-32 Plated Steel, Multiple Drive
Stainless Steel
Zinc Plated Steel
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Stainless Steel, Multiple Drive
#8-32 Stainless Steel, Multiple Drive
Stainless Steel
Stainless Steel
UL498
WC596*
C22.2, No. 42
UL498
WC596*
C22.2, No. 42
Withstands 2,000V minimum.
125V.
Certified for current interrupting at
full rated current.
Max 30°C temperature rise at full rated
current after 100 cycles of overload at
150% of rated current.
Withstands 2,000V minimum.
125V.
Certified for current interrupting at
full rated current.
Max 30°C temperature rise at full rated
current after 100 cycles of overload at
150% of rated current.
Terminals identified in accordance with
UL 498 and CSA (Brass, White, Green).
#14-10 AWG stranded or solid copper
conductor only.
Ratings are a permanent part of the device.
Terminals identified in accordance with
UL 498 and CSA (Brass, White, Green).
#14-10 AWG stranded or solid copper
conductor only.
Ratings are a permanent part of the device.
UL 94V-2.
Maximum continuous 75°C; minimum -40°C
(w/o impact).
UL 94V-2.
Maximum continuous 75°C; minimum -40°C
(w/o impact).
Finish
Mounting Strap
Ground Contact
Line Terminal Screws
Ground Screw
Automatic Self-Grounding Staple
Mounting Screws
Certification
UL Listed
Fed. Spec.
Certified to CSA
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Environmental – Material
Flammability
Operating Temperature
Note: *Decorator and Commercial Tamper-Resistant devices are not Fed. Spec. Listed.
www.hubbell-wiring.com
®
Wiring Device-Kellems
A-59
Straight Blade Devices
Technical Information
4-PLEX® Receptacles
HBL415I
Specifications
Receptacle
Part
Description
Typical Specification – Catalog No. HBL415
Manufacturer’s Identification – Hubbell 4-PLEX HBL415
Description – Straight Blade, Multiple Outlet Receptacle
Type – 2 Pole, 3 Wire, Grounding
Rating 15A, 125V
Certification – Listed to UL Standard 498 File E2186
Certified to CSA 22.2, No. 42 File 285
Receptacle
Top
Base
Power Contacts
Ground Contacts
Ground Plate
(Hospital Grade)
Line and Neutral Terminal Plate
Line Terminal Screw
Ground Screw
15 or 20A
Polycarbonate
Polycarbonate
.032 in. (.8) Brass
.031 in. (.8) Brass
.032 in. (.8) Plated Steel
.050 in. (1.3) Plated Steel
.031 in. (.8) Brass
#8-32 Brass
#8-32 Brass (Green)
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V.
Capable of withstanding a fault level of 1000A, per UL498.
Max 30°C temperature rise at full rated current after 50 cycles of overload
current at 150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Terminals identified in accordance with UL498 and CSA (Brass, White, Green).
#14-12 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Environmental
Flammability
Operating Temperature
A-60
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
Technical Information
Insulgrip® Plugs and Connector Bodies
HBL5266C
HBL5269C
Specifications
Plugs
Part
Typical Specification – Catalog No. HBL5266C
Manufacturer’s Identification – Hubbell HBL5266C
Description – Straight Body Plug
Type – 2 Pole, 3 Wire, Grounding
Rating – 15A, 125V
Verified to Federal Spec WC596
Certification – UL Listed to UL498 File E1706,
CSA Certified to C22.2 No. 42 File 280
IP Suitability – IP20
Description
Plug
Housing
Blade Holder
Retainer
Cord Clamp
Contact Blades
Ground Contact Blade
Line Terminal Screws
Ground Screw
Wire Clamps
15A
Nylon – Black
Nylon – Natural
Polycarbonate – Clear
Nylon – Natural
.060 in. (1.5) Brass
.040 in. (1.0) Copper Alloy
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive (Green)
.062 in. (1.6) Steel – Nickel Finish
Connector Bodies
Part
Description
Typical Specification – Catalog No. HBL5269C
Manufacturer’s Identification – Hubbell HBL5269C
Description – Straight Body Connector
Type – 2 Pole, 3 Wire, Grounding
Rating – 15A, 125V
Verified to Federal Spec WC596
Certification – UL Listed to UL498 File E1706,
CSA Certified to C22.2 No. 42 File 280
IP Suitability – IP20
Connector Body
Housing
Contact Holder
Retainer
Cord Clamp
Power Contacts
Line Terminal Screws
Ground Screw
Wire Clamps
15A
Nylon – Black
Nylon – Natural
Polycarbonate – Clear
Nylon – Natural
.040 in. (1.0) Copper Alloy
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive (Green)
.062 in. (1.6) Steel – Nickel Finish
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Torque Range
Cord Diameter Range
Terminals identified in accordance with UL498 and CSA (Brass, White, Green).
#18-10 AWG copper conductors only.
Ratings are a permanent part of the device.
12 in./lb. terminal screws, 7 in./lb. assembly screws.
.230–.720 in. (5.8–18.3) integral cord grip.
Environmental – Material
Flammability
Operating Temperature
www.hubbell-wiring.com
UL 94HB or better.
Maximum continuous 75°C; minimum – 40°C (w/o impact).
®
Wiring Device-Kellems
A-61
Straight Blade Devices
Technical Information
Valise® Plugs and Connectors
HBL5969VY
HBL5965VY
Specifications
Plugs
Part
Description
Typical Specification – Catalog No. HBL5965VY
Manufacturer’s Identification – Hubbell HBL5965VY
Description – Straight Body Plug
Type – 2 Pole, 3 Wire, Grounding
Rating – 15A, 125V
Verified to Federal Spec WC596
Certification – UL Listed to UL 498 File E1706,
CSA Certified to C22.2 No. 42 File 280C
IP Suitability – IP20
Plug
Housing
Contact Blades
Ground Blade
Line Terminal Screws
Ground Screw
Cable Inserts
Wire Clamps
Body Holding Screws
15A
Nylon
Brass
Brass
Steel-Copper, Multiple Drive
Steel (Green), Multiple Drive
Poly Phenylene Oxide
Steel
Steel, Multiple Drive
Connector Bodies
Part
Connector
Typical Specification – Catalog No. HBL5969VY
Manufacturer’s Identification – Hubbell HBL5969VY
Description – Straight Body Connector
Type – 2 Pole, 3 Wire, Grounding
Rating – 15A, 125V
Verified to Federal Spec WC596
Certification – UL Listed to UL 498 File E1706,
CSA Certified to C22.2 No. 42 File 280C
IP Suitability – IP20
Connector Body
Housing
Contact and Ground Springs
Line Terminal Screws
Ground Screw
Cable Inserts
Wire Clamps
Body Holding Screws
15A
Nylon
Brass
Steel-Copper, Multiple Drive
Steel (Green), Multiple Drive
Poly Phenylene Oxide
Steel
Steel, Multiple Drive
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current interrupting
Temperature Rise
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Terminals identified in accordance with UL 498 and CSA (Brass, White, Green).
Copper conductors only.
2 Wire 15A Only #18-14 AWG,
2 Wire 20A & 3 Wire #18-12 AWG,
Hospital Grade #16-12 AWG,
I.D. Valise #18-16 AWG.
Molded Rating on Device Face.
12 in./lb. terminal screws, 7 in./lb. assembly screws.
2-Wire 15A Only .218–.385 in. (5.5–9.8),
2-Wire 20A & 3 Wire .220–.660 in. (5.6–16.8),
Hospital Grade .300–.660 in. (7.6–16.8),
I.D. Valise .230–.360 in. (5.8–9.1).
Product Identification
Torque
Cord Diameter Range
Environmental – Material
Flammability
Operating Temperature
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Standards
NEMA® WD1
NEMA® Configurations
Listed to UL Standard UL498
Certified to CSA Standard C22.2 No. 42
Verified to Federal Spec WC596
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
A-62
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
Technical Information
IEC 320 Devices
H320R
H320C
H320P
H320B
Specifications
Receptacle
Catalog Number
Description
Type
Rating
Certification
Terminal Accommodation
H320R
IEC Configuration compatible straight blade panel mount receptacle.
2 Pole + earth.
16A 250V AC for European service;
20A 250V AC for North American service.
UL listed 20A 250V AC – File No. E2186;
CSA certified 20A 250V AC – File No 17337.
North American – #16-12 AWG stranded or solid copper conductor only.
International – 1.55mm2–2.5mm2.
Connector
Catalog Number
Description
Type
Rating
Configuration
Certification
Cord Accommodation
IP Suitability
H320C
IEC Detachable straight blade connector.
2 Pole + earth.
16A 250V AC for European service;
20A 250V AC for North American service.
IEC 60320-1 Style appliance coupler, C19.
UL listed 20A 250V AC – File No. E1706;
CSA Certified 20A 250V AC – File No. 17337;
UL classified to IEC 320, 16A 250V AC – File No. E111246;
North American – 16/3SJ-12/3SJ (.325–.475 in. dia.);
International – (HAR cord) 3x1.5mm2–3x2.5mm2 (8mm–12mm dia.).
IP20.
Plug
Catalog Number
Description
Type
Rating
Certification
Cord Accommodation
IP Suitability
H320P
IEC Configuration compatible straight blade Valise® plug.
2 Pole + earth.
16A 250V AC for European service;
20A 250V AC for North American service.
UL listed 20A 250V AC – File No. E1706;
CSA Certified 20A 250V AC – File No. 17337.
North American – 16/3 SJ-12/3SJ (.325–.475 in. dia.);
International – (HAR cord) 3x1.5mm2 3x2.5mm2 (8–12mm dia.).
IP20.
Inlet
Catalog Number
Description
Type
Rating
Configuration
Certification
Terminal Accommodation
www.hubbell-wiring.com
H320B and H320BL
IEC Straight blade panel mount power inlet.
2 Pole + earth.
16A 250V AC for European service;
20A 250V AC for North American service.
IEC 60320-1 Style appliance coupler, C20.
UL listed 20A 250V AC – File No. E1706;
CSA certified 20A 250V AC – File No. 17337;
UL classified to IEC 320, 16A 250V AC – File No. E111246;
VDE certified at 16A 250V AC – File No. 12469 1550 1002.
North American – #16-12 AWG stranded or solid copper conductor only.
International – 1.5mm2–2.5mm2.
®
Wiring Device-Kellems
A-63
Straight Blade Devices
Technical Information
Heavy Duty Insulgrip® Plugs and Receptacles
HBL9431C
Specifications
HBL9430A
Plug
Part
Description
Typical Specification - Catalog No. HBL9431C
Manufacturer's identification - Hubbell HBL9431C
Description - Straight Body Plug
Type - 3 Pole, 4 Wire, Grounding
Rating - 30A, 125/250V
Certification - UL Listed File E1706, CSA Certified*
IP Suitability - IP20
Plug
Housing
Blade Holder & Retainer
Blades
Terminal Screws
Box Terminals
Cord Clamps
Mounting and Clamp Screws
Cord Grip Range
30A
Supertough Nylon
Reinforced Thermoplastic Polyester
Brass
³⁄₈ in. Allen Head, Plated Steel
Copper Alloy
Reinforced Thermoplastic Polyester
Stainless Steel
.625–1.310 in. (15.9–33.3)
Receptacle
Part
Description
Typical Specification - Catalog No. HBL9430A
Manufacturer's Identification - Hubbell HBL9430A
Description - Single Receptacle
Type - 3 Pole, 4 Wire, Grounding
Rating - 30A, 125/250V
Certification - UL Listed File E2186, CSA Certified
Receptacle
Housing Construction
Mounting Plate
Contacts
Ground Shunt
Terminal Screws
Box Terminals
30A
Reinforced Thermoplastic Polyester
.062 in. (1.5) Pre-Plated Steel
Brass
Brass
³⁄₈ in. Allen Head, Plated Steel
Copper
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interruption
Temperature Rise
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Production Identification
Terminals identified in accordance with UL 498 (Brass, White, Green).
#12 AWG through #4 AWG copper wire only.
Ratings are a permanent part of the device.
Environmental
Flammability
Receptacle: UL 94 VO.
Plug: UL 94 HB (Housing), UL 94 VO (Blade Holder and Retainer).
Maximum continuous 60°C, minimum -40°C (w/o impact).
Operating Temperature
Note: *Listed to UL Standard 498 (Attachment Plugs and Receptacles), Certified to CSA Standard 42M (General Use Receptacles, Attachments, Plugs and Singular
Wiring Devices) where applicable.
A-64
®
Wiring Device-Kellems
www.hubbell-wiring.com
Section B
Twist-Lock® and Hubbellock® Devices
Index
Product
Page
Midget Twist-Lock®
Devices
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
15A Midget Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
15A Twist-Lock® Devices - Features and Benefits . . . . . . . . . . . . . . . . . . . B-7
Features and Benefits
20 and 30A Plugs and Connector Bodies . . . . . . . . . . . . . . . . . . . . . . . . B-12
The Standard for Locking Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . B-13
Watertight Safety-Shroud® Twist-Lock® System . . . . . . . . . . . . . . . . . . . B-14
Safety-Shroud® Twist-Lock® System . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-15
Compatibility and Environmental Protection Chart . . . . . . . . . . . . . . . . . B-16
Twist-Lock® Devices
20A Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-17
30A Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-26
Switched Safety Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-36
Mechanical Interlock Switched Safety Enclosures . . . . . . . . . . . . . . . . . B-38
Add-A-Shroud® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-40
10, 20 and 30A Non-NEMA Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . B-41
15, 20 and 30A Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-48
50A Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-55
Hubbellock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-61
Technical Information
15, 20 and 30A Twist-Lock® and Safety-Shroud Devices . . . . . . . . . . . . B-69
Watertight Safety-Shroud®
and Circuit-Lock®
Watertight Safety-Shroud Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . B-70
50A Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-71
Switched Twist-Lock® and Hubbellock® Enclosures . . . . . . . . . . . . . . . . B-72
Mechanical Interlock Switched Safety Enclosures. . . . . . . . . . . . . . . . . . B-73
Valise® Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-74
50 Amp Devices and
Hubbellock®
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-1
Twist-Lock® Devices
Summary
There’s Only One Manufacturer
of Twist-Lock®…Hubbell.
Insulgrip® Plugs, Connectors,
Receptacles and Inlets
The widest range of singularly
rated NEMA devices available.
Designed to last from
engineered thermoplastic
materials and high
performing alloys.
Safety-Shroud® Twist-Lock®
The ultimate in Twist-Lock
safety. A full offering of plugs
and connectors that lead the
field in personnel safety. Also
included are receptacles in
three styles, angled, surface
mount and semi-flush to
satisfy every installation need.
Watertight Safety-Shroud®
Twist-Lock®
A complete family of plugs,
connectors, receptacles and
inlets featuring UL Type 4X
enclosure ratings and
Safety-Shroud design.
B-2
There’s no company more synonymous
with a tradition of excellence in the
electrical industry than Hubbell. Having
introduced the Twist-Lock device in the
early 20th century Hubbell has been the
market leader ever since.
Hubbell Insulgrip® Twist-Lock’s rugged
construction features highly engineered
materials, roomy wiring chambers,
superior strain relief and powerful cord grip
designs. Insulgrip Twist-Lock products are
the foundation of the broadest breadth of
line available. Hubbell offers Twist-Lock for
minimum space applications (Midget), and
all other applications from 15 Amp to 50
Amp. Hubbell’s design expertise assures
the best performing products available.
Hubbell Re-Defines Excellence
The Insulgrip Twist-Lock product line
features a complete offering of 20A and
30A Safety Shroud Twist-Lock devices.
Current carrying blades are protected
by a fixed shroud, shielding them from
deformation. Even more importantly, the
shroud virtually eliminates user contact
with a partially engaged, energized plug.
For wet environments, Hubbell offers
the Watertight Safety-Shroud Twist-Lock
series. These products incorporate the
shrouding technology with a UL Type 4X
enclosure rating.
Watertight Mechanical Interlock
for Safety-Shroud® Twist-Lock®
Hubbell’s Circuit-Lock enclosure
products virtually eliminate
making or breaking the circuit
under load.
®
Wiring Device-Kellems
50 Amp Insulgrip
Twist-Lock®
An exclusive Hubbell design
delivering Insulgrip features,
insulated housing and superior
strain relief. They are tough
and rugged enough for the
most demanding construction
or industrial applications.
Midget Twist-Lock®
These 2 wire and 3 wire
products offer the same quality
as their larger counterparts,
but are sized to go where
they can’t. The optional
Valise® design makes for
fast, simple wiring.
Hubbellock® Devices
Hubbellock devices are the
proven choice to reduce
problems resulting from arcing,
lazy connections, loosening
terminals, moisture, corrosion
and rough use.
www.hubbell-wiring.com
Twist-Lock® Devices
Midget Twist-Lock®
Features and Benefits
Hubbell’s Valise® insulation displacement terminal for Midget Twist-Lock® Plugs and Connector Bodies are the right choice
for economy, wiring speed and long life.
Assembly screws have multiple drive heads for screwdriver versatility.
Only two assembly screws are needed to close this device, make
the wire terminations and retain the cord
Totally insulated body adds extra measure of safety
Abuse resistant nylon housing
Nylon webs join two sections together which makes
assembly of the device quick and easy
Patented locking lugs interlock the two sections together
when the device is assembled providing a secure
assembly, even in the most abusive environments
The insulation displacement terminal reduces the time
required for wire preparation and provides uniformity in
the quality of termination
HBL7594V
Powerful, cord-gripping jaws designed
to eliminate conductor slip and strain
on terminals
“TURN & PULL” marking is highly visible, reducing
possible damage to equipment by attempting
disconnection prior to unlocking
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-3
Twist-Lock® Devices
15 Ampere, 125 and 125/250 Volts
Midget Twist-Lock® Plugs and Flanged Inlets
W
IP20
1.25"
(31.8)
GR
SUITABILITY
Plugs
1.06"
(26.9)
HBL7465V
1.61"
(40.9)
1.19"
(30.2)
HBL7594V
2.00"
(50.8)
1.59"
(40.4)
1.17"
(29.7)
1.13"
(28.7)
HBL7594
1.69"
(42.9)
.86"
(21.8)
1.17"
(29.7)
HBL7570
15A 125V
NEMA ML-1P
15A 125V
NEMA ML-2P
Description
Cord Dia.
Catalog Number
Valise® plug, black nylon.
.220"-.385"
(5.6-9.8)
HBL7465V*
Valise® plug, black nylon,
insulation displacement terminals.
.300"-.430"
(7.6-10.9)
Black nylon cover, phenolic body,
multiple drive screw terminals.
15A 125/250V
NEMA ML-3P
–
–
–
HBL7594V
–
.281"-.421"
(7.1-10.7)
–
HBL7594
–
Angle plug, black nylon cover,
phenolic body, multiple drive
screw terminals.
.335"-.421"
(8.5-10.7)
–
HBL7570
–
Valise® plug, black nylon, with
insulation displacement terminals,
multiple drive screws.
.300"-.430"
(7.6-10.9)
–
–
HBL7485V*
Black nylon body, phenolic base,
multiple drive screw terminals,
cord grip.
.281"-.421"
(7.1-10.7)
–
–
HBL7485*
Same as above, except angle
cord grip.
.335"-.421"
(8.5-10.7)
–
–
HBL7432*
Flanged Inlets
Description
Catalog Number
Stainless steel flange, polarized,
exposed terminals.
HBL7467*
–
–
Stainless steel flange, not polarized,
exposed terminals.
HBL7466*
–
–
Exposed terminals, black nylon flange.
–
HBL7595N
–
Exposed terminals, stainless steel flange.
–
HBL7595
–
Covered terminals, stainless steel flange,
accepts cord .500" (12.7) dia.
–
HBL7551
–
Exposed terminals, black nylon flange.
–
–
HBL7486N*
Exposed terminals, stainless steel flange.
–
–
HBL7486*
Note: See page B-6 for accessories.
*UL Listed only.
Male ML-2P devices have hollow center ground sleeves.
Male ML-3P devices have solid center neutral pins.
1.63"
(41.4)
1.38"
(35.1)
.16"
(4.1)
DIA.
W
.94"
(23.9)
1.06"
(26.9)
HBL7466, HBL7467
2.06"
(52.3)
1.75"
(44.5)
2.06"
(52.3)
1.75"
(44.5)
.15"
(3.8)
DIA.
1.00"
(25.4)
2.06"
(52.3)
1.75"
(44.5)
.16"
(4.1)
DIA.
1.00"
(25.4)
2.06"
(52.3)
1.75"
(44.5)
.15"
(3.8)
DIA.
1.00"
(25.4)
.16"
(4.1)
DIA.
1.00"
(25.4)
1.28"
(32.5)
1.22"
(31.0)
1.27"
(32.3)
1.22"
(31)
HBL7595N
HBL7595
HBL7486N
HBL7486
Dimensions in Inches (mm)
B-4
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
15 Ampere, 125 and 125/250 Volts
Midget Twist-Lock® Connector Bodies and Flanged Receptacles
X
IP20
W
SUITABILITY
Y
Connector Bodies
15A 125V
NEMA ML-1R
Description
Cord Dia.
Catalog Number
Valise® connector body, black nylon,
polarized.
.220"-.385"
(5.6-9.8)
HBL7464V*
Valise® connector body, black nylon,
insulation displacement terminals.
.300"-.430"
(7.6-10.9)
Black nylon cover, phenolic body,
screw terminals.
Angle connector body, black nylon
cover, phenolic body, screw terminals.
15A 125V
NEMA ML-2R
1.77"
(45.0)
15A 125/250V
NEMA ML-3R
–
–
–
HBL7593V
–
.281"-.421"
(7.1-10.7)
–
HBL7593
–
.335"-.421"
(8.5-10.7)
–
HBL7571
–
.300"-.430"
Valise® type, black nylon, with
insulation displacement terminals, multiple (7.6-10.9)
drive screws.
–
–
HBL7484V*
Black nylon body, phenolic base,
multiple drive screws, cord grip.
.281"-.421"
(7.1-10.7)
–
–
HBL7484*
Same as above, except for angle
cord grip.
.335"-.421"
(8.5-10.7)
–
–
HBL7433*
1.06"
(26.9)
.97"
(24.6)
HBL7464V
1.98"
(50.4)
1.19"
(30.2)
HBL7593V
2.42"
(61.5)
1.13"
(28.7)
1.17"
(29.7)
Flanged Receptacles
HBL7593
Description
Catalog Number
Stainless steel flange, exposed terminals.
HBL7468*
–
–
–
HBL7596N
–
Exposed terminals, black nylon flange.
Exposed terminals, stainless steel flange.
–
HBL7596
–
Covered terminals, stainless steel flange,
accepts cord .500" (12.7) in dia.
–
HBL7598
–
Exposed terminals, black nylon flange.
–
–
HBL7487N*
Exposed terminals, stainless steel flange.
–
–
HBL7487*
Covered terminals, stainless steel flange,
accepts cord .500" (12.7) in diameter.
–
–
HBL7489*
1.69"
(42.9)
1.28"
(32.5)
1.17"
(29.7)
HBL7571
Note: See page B-6 for accessories.
*UL Listed only.
Female ML-2R devices have solid center ground pins.
Female ML-3R devices have hollow center neutral sleeves.
1.97"
(50.0)
1.19"
(30.2)
HBL7484V
2.02"
(51.3)
1.17"
(29.7)
1.13"
(28.7)
HBL7484
2.06"
(52.3)
1.75"
(44.5)
2.06"
(52.3)
1.75"
(44.5)
.16"
(4.1)
DIA.
.97"
(24.6)
.16"
(4.1)
DIA.
2.06"
(52.3)
1.75"
(44.5)
1.25"
(31.8)
1.00"
(25.4)
1.63"
(41.4)
1.38"
(35.1)
.15"
(3.8)
DIA.
1.17"
(29.7)
1.17"
(29.7)
1.14"
(29.0)
HBL7596
HBL7598
HBL7596N
.16"
(4.1)
DIA.
.78"
(19.8)
1.03"
(26.2)
HBL7468
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-5
Twist-Lock® Devices
Midget Twist-Lock® Accessories
Weatherproof Accessories
HBL7490V
Description
Catalog Number
Seal-tite® cover, black elastomer, for use with a HBL7465V plug when
used with a HBL7464V connector body or a HBL7464V connector
when used with a flanged inlet.
HBL7490V*
Seal-tite® cover, black elastomer, for use with a HBL7464V connector
body and combination of HBL7465V plug and HBL7490V cover.
HBL7459V*
Closure cover for use with HBL7466 or HBL7467.
Bead chain is nickel-plated.
HBL4890
Weatherproof Accessories
HBL7459V
Description
Catalog Number
Seal-Tite®
cover, black elastomer, for use with a HBL7594V plug when
used with a HBL7593V connector body or a HBL7593V
connector body when used with a flanged inlet.
HBL7495V*
Seal-Tite® cover, black elastomer, for use with a HBL7593V connector
body and a combination of HBL7594V plug and HBL7495V cover.
HBL7440V*
Closure cover for use with HBL7595 or HBL7595N.
HBL4889
Weatherproof Accessories
HBL4890
Description
Catalog Number
Seal-Tite® cover, black elastomer, for use with a HBL7485V or
HBL7485 plug when used with a HBL7484V or HBL7484
connector body when used with a flanged inlet.
HBL7495V*
Seal-Tite® cover, black elastomer, for use with a HBL7484V or
HBL7484 connector body and a combination of HBL7485V or
HBL7485 plug and HBL7495V cover.
HBL7440V*
Closure cover for use with HBL7486 or HBL7486N.
HBL4889
Note: *IP55 suitability when installed and used properly with plug and connector body combinations.
HBL7495V
HBL7440V
HBL4889
Dimensions in Inches (mm)
B-6
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Insulgrip® 15 Ampere Plugs and Connector Bodies
Featuring Integral VARI-SIZE® Cord Grip
Individually molded face for each
blade configuration keeps debris
out of plug interior
Roomy wiring chamber provides
ample space for wiring
Powerful, cord grips clamp on
individual conductors and outer
cord jacket to prevent strain
on terminals
Individual wiring terminals
are completely enclosed
in their own separate
chambers
Ribbed nylon housing provides
a secure grip that’s impact and
chemical resistant
HBL4770C
Beveled housing prevents
snagging when dragged across
uneven surfaces
Integral VARI-SIZE® insert adjusts
to a wide range of cord sizes:
.230"-.720" (5.8-18.3).
Multiple drive screw heads provide
screwdriver versatility. Pocketed
recess for cord grip screws deters
slippage of the screwdriver.
VARI-SIZE® pointer set to “smaller
than gauge” position. Cord diameter
range is .230"-.360" (5.8-9.0).
Accepts slotted and Phillips
head drivers.
Transparent angled wiring entrance
holes permit “straight in” conductor
insertion and quick visual verification
for terminations.
Catalog number is visible on the
device while in use for easy
identification.
Powerful cord grips clamp on
individual conductors and outer
cord jacket to prevent strain on
terminations.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-7
Twist-Lock® Devices
15 Ampere Duplex Twist-Lock® Receptacles
Including Isolated Ground and Corrosion Resistant Devices
Brass mounting strap with
stainless steel grounding clip
Reinforced thermoplastic construction
Single piece, all brass contacts
All terminals are back and side wired
including the ground
Single point
break-off tabs
High performance internal wiring clamps and
open terminal design provide for the use of
forked terminals
HBL4700
Mounting strap tabs lock the body
and base together
Hubbell Wiring Device-Kellems line of duplex Twist-Lock®
receptacles are designed to deliver premium service and
longer life. This rugged product design establishes a new
standard for 15 amp locking receptacles. A reinforced
thermoplastic top and base encapsulates the brass alloy
contacts that are locked together for unequaled assembly
strength. Wiring and installation is simplified with back
and side wire terminations, integral wire restraints, and
combination head screws. The integral split circuit capability
offers flexibility. Available in 2 pole, 3 wire configurations
including isolated ground and corrosion resistant versions.
B-8
®
Benefits
• High impact and heat resistance provides maximum
safety and longer life.
• Superior spring characteristics for increased contact
force, secure connections and longer life.
• High-conductivity, corrosion resistant material for
reliable, low resistance to fault currents.
• Easy and reliable installation for stranded and solid wire.
• Features split circuit capability in the field.
• The assembly locks together to make the most abuse
resistant receptacle ever.
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
15 Ampere, 125 Volts
2 Pole, 2 Wire, Non-Grounding
IP20
SUITABILITY
W
15A 125V
NEMA L1-15P
UL Listed
0.5 HP
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon, polarized. Multiple drive screws.
.230"-.720"
(5.8-18.3)
HBL7545C
1.53"
(38.9)
1.91"
(48.5)
Note: See page B-49 for accessories.
HBL7545C
Flanged Inlets
Description
Catalog Number
Nylon casing, polarized, backwired, Multiple drive screws.
HBL7524C
2.56"
(65.0)
2.19"
(55.6)
Note: See page B-48 for accessories.
W
15A 125V
NEMA L1-15R
UL Listed
0.5 HP
Connector Bodies
Description
Cord Dia.
Catalog Number
Black and white nylon. Multiple drive screws.
.230"-.720"
(5.8-18.3)
HBL7506C
.16"
(4.1)
DIA.
1.69"
(42.9)
1.72"
(43.7)
HBL7524C
Note: See page B-49 for accessories.
2.78"
(70.6)
Receptacles
Description
Catalog Number
Duplex, flush, black phenolic.
HBL7540
Single, flush, black phenolic.
HBL7535
Single, panel mount, 1¹⁵ ₁₆" (49.2) centers, black phenolic.
HBL7498
1.53"
(38.9)
1.41"
(35.8)
HBL7506C
Note: See pages B-48 and B-49 for accessories.
1.00"
(25.4)
Flanged Receptacles
Description
Catalog Number
Insulgrip nylon casing, backwired. Multiple drive screws.
HBL7526C
Metal flange, stainless steel casing, black phenolic,
exposed terminals.
HBL7526
3.28"
(83.3)
2.75"
(69.9)
#6-32
TAP
1.53"
(38.8)
Note: See pages B-48 and B-49 for accessories.
Only receptacles and plugs are HP rated.
HP ratings are AC only.
1.11"
(28.2)
1.33"
(33.8)
1.19"
(30.2)
HBL7540
2.56"
(65.0)
2.19"
(55.6)
.16"
(4.1)
DIA.
1.69"
(42.9)
1.00"
(25.4)
1.00"
(25.4)
#8-32TAP
1.63"
(41.4)
1.94" 1.39"
(49.3) (35.3)
1.63"
(41.4)
3.28" 2.38" 1.39"
(83.3) (60.5) (35.3)
#6-32 TAP
1.72"
(43.7)
HBL7526C
1.39"
(35.3)
1.19"
(30.2)
HBL7498
1.19"
(30.2)
HBL7535
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-9
Twist-Lock® Devices
15 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
W
IP20
1.91"
(48.5)
SUITABILITY
1.53"
(38.9)
HBL4720C
1.22"
(30.9)
2.11"
(53.6)
1.53"
(38.9)
HBL4720CA
2.63"
(66.8)
Plugs
W
X
G
G
G
Y
15A 125V
NEMA L5-15P
UL/CSA
0.5 HP
15A 250V
NEMA L6-15P
UL/CSA
1.5 HP
15A 277V AC
NEMA L7-15P
UL/CSA
2 HP
Description
Cord Dia.
Catalog Number
Insulgrip plug, black and white nylon.
Multiple drive screws. Fed Spec WC596
.230"-.720"
(5.8-18.3)
HBL4720C
All black nylon.
.230"-.720"
(5.8-18.3)
HBL4720CBK
Insulgrip angle plug, 8 position angle,
black and white nylon. Multiple
drive screws.
.325"-.655"
(8.3-16.6)
HBL4720CA
Insulgrip plug, corrosion resistant,
yellow and white nylon. Multiple
drive screws. Fed Spec WC596
.230"-.720"
(5.8-18.3)
HBL47CM20C HBL45CM70C HBL47CM70C
Elastogrip® plug, yellow elastomer,
dust tight.
300"-.655"
(7.6-16.6)
HBL2447
–
–
Elastogrip plug, yellow elastomer,
water/dust tight.
300"-.655"
(7.6-16.6)
HBL24W47
–
–
Valise® plug, yellow nylon.
.220"-.660"
(5.6-16.8)
HBL4723VY
Valise® plug, black nylon.
.220"-.660"
(5.6-16.8)
HBL4723VBK HBL4573VBK HBL4773VBK
HBL4570C
HBL4770C
–
–
HBL4570CA
HBL4573VY
HBL4770CA
HBL4773VY
Note: See page B-49 for accessories.
1.56"
(39.6)
HBL24W47
1.88"
(47.8)
1.50"
(38.1)
Flanged Inlets
Description
Catalog Number
Insulgrip flanged inlet, nylon casing,
back wired.
HBL4716C
HBL4586C
HBL4786C
Stainless steel casing, brown phenolic.
HBL4716*
HBL4586*
HBL4786*
Corrosion resistant, stainless steel
casing, yellow melamine.
HBL47CM16*
–
–
Note: See page B-48 for accessories.
HP ratings are AC only.
Only plugs are HP rated.
See page B-69 for technical information on Insulgrip devices.
*These flanged inlets will not accept Valise® connector bodies.
HBL4723VY
2.56"
(52.3)
2.19"
(55.6)
.16"
(4.1)
DIA.
1.72"
(43.7)
1.69"
(42.9)
HBL4716C
2.31"
(58.7)
1.94"
(49.3)
1.75"
(44.5)
.16"
(4.1)
DIA.
1.09"
(27.7)
1.50"
(38.1)
HBL4716
Dimensions in Inches (mm)
B-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
15 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
G
W
X
G
IP20
SUITABILITY
Connector Bodies
Cord Dia.
Catalog Number
Insulgrip connector body, black and
white nylon. Multiple drive screws.
All black nylon.
.230"-.720"
(5.8-18.3)
.230"-.720"
(5.8-18.3)
.325"-.655"
(8.3-16.6)
HBL4729C
Valise® connector body, black nylon.
2.78"
(70.6)
Y
15A 125V
NEMA L5-15R
UL/CSA
Description
Insulgrip connector body, 8 position
angle, black and white nylon.
Multiple drive screws.
Insulgrip connector body, corrosion
resistant, yellow and white nylon.
Multiple drive screws.
Elastogrip connector body, yellow
elastomer, dust tight.
Elastogrip® connector body, yellow
elastomer, water/dust tight.
Valise® connector body, yellow nylon.
W
G
15A 277V AC
NEMA L7-15R
UL/CSA
15A 250V
NEMA L6-15R
UL/CSA
HBL4579C
HBL4779C
HBL4729CBK
–
–
HBL4729CA
–
–
HBL4729C
1.75"
(44.5)
.230"-.720"
(5.8-18.3)
HBL47CM29C HBL45CM79C HBL47CM79C
.300"-.655"
(7.6-16.6)
.300"-.655"
(7.6-16.6)
.220"-.660"
(5.6-16.8)
.220"-.660"
(5.6-16.8)
HBL2547
–
–
HBL25W47**
–
–
HBL4729VY
1.41"
(35.8)
1.53"
(38.9)
HBL4579VY
4.00"
(101.6)
HBL25W47
2.59"
(65.8)
HBL4779VY
1.50"
(38.1)
HBL4729VBK HBL4579VBK HBL4779VBK
Note: See page B-49 for accessories.
HBL4729VY
Receptacles
Description
Catalog Number
Duplex, flush, brown RTP face, back and side wired.
Duplex, flush, ivory RTP face, back and side wired.
Duplex, ring terminal connection.
Duplex, isolated ground, flush, orange RTP face,
back and side wired.
Duplex, corrosion resistant, yellow RTP face,
back and side wired.
Single, flush, black nylon face, back and side wired.
Same as HBL4760 without mounting screws, ears.
Terminal screws backed out, back and side wired.
Single, ring terminal connection.
Single, isolated ground, flush, orange nylon face,
back and side wired.
Single, black nylon face mounted on a
4" (101.6) round box cover, back and side wired.
Single, panel mount, black nylon face, side wired
only, 1.75" or 1.937" (44.5 or 49.2) mounting centers.
HBL4700*
HBL4700I*
HBL4700RT*
IG4700A*
HBL47CM00*
HBL4550*
–
HBL4550RT*
IG4550A*
1.70"
(43.2)
HBL4750*
–
–
–
3.28"
(83.3)
–
–
HBL4710
–
HBL4560
–
HBL4760
HBL4760C
HBL4710RT
IG4710
HBL4560RT
IG4560
–
–
2.735"
(69.5)
HBL4700
HBL4711
–
HBL4761
HBL4713
HBL4563
HBL4763
Note: See pages B-48 and B-49 for accessories.
1.27"
(32.3)
3.28"
(83.3)
2.38" 1.38"
(60.5) (35.1)
Flanged Receptacles
Description
Catalog Number
Insulgrip flanged receptacle, nylon casing,
back wired.
Stainless steel casing, brown phenolic.
Corrosion resistant, stainless steel casing,
yellow melamine.
HBL4715C
HBL4585C
HBL4785C
HBL4715
HBL47CM15
HBL4585
–
HBL4785
–
Note: See pages B-48 and B-49 for accessories.
HP ratings are AC only.
RTP is an abbreviation for reinforced thermoplastic polyester.
See section M for additional information on isolated ground devices.
*Supplied with break-off tabs for split circuit wiring.
**Watertight connector body IP55 suitability when closure plug is
inserted or when installed and used properly with watertight plug.
2.56"
(65.0)
2.19"
(55.6)
2.31"
(58.7)
1.94"
(49.3)
.16"
(4.1)
DIA.
HBL4710
1.75"
(44.5)
.16"
(4.1)
DIA.
1.72"
(43.7)
1.36"
(34.5)
1.50"
(38.1)
HBL4715
1.69"
(42.9)
HBL4715C
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-11
Twist-Lock® Devices
20 and 30 Ampere Plugs and Connector Bodies
Features and Benefits
Improved terminations include
#10 multiple drive screws and
thicker .080" clamping nuts
Insulated nylon construction to
keep non-current carrying parts
from becoming energized
Funneled holes to permit “straightin” conductor insertion
Self-threading screws
specially designed for
secure assembly
Tough ribbed nylon housing
for secure gripping
Two-part cord grip tightens with
two screws for maximum retention
force. Broad gripping area to
accommodate wide range of
cable diameters
HBL2311
Integral dust shield protects
wiring chamber from dust or
contaminants. Single-piece
shield/housing eliminates need
for separate step at installation
Wiring chambers separate and
positively insulate conductors
and promote easy inspection
Product identification is visible while
device is in use. Markings include
catalog number and ratings printed in
the IEC color scheme on the currentcarrying portion of the device
HBL2313
Our 20 and 30 amp Insulgrip® plugs and connectors
maintain Hubbell’s classic integrity, solid construction
and safety features that make these devices the ‘industry
standard’.
Insulgrip’s cord gripping design clamps the conductors, not
just the cable jacket, making it the industry’s most powerful
cord grip. The restyled cord grips provide a clean, one-piece
look, and actually make it stronger.
Insulgrip’s design guards against contamination.
The nylon body and housing of the plugs and connectors
are resistant to industrial chemicals, solvents and
hydrocarbons. The face of each plug is molded specific
B-12
®
to the blade configuration, eliminating holes that attract
debris. And finally, our dust shield provides additional
protection from contamination.
Additional features that make Insulgrip the industry standard
are our improved contacts that provide better terminations,
an exclusive double rivet design for the female contacts and
an easy to read identification system.
The Hubbell Twist-Lock® line of plugs and connectors
remain the broadest in the industry. Hubbell has you
covered – proven performance, innovation and selection.
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
The Standard for Locking Receptacles
Features and Benefits
Face color coding by voltage facilitates
locating and mating of proper devices
All-brass mounting and grounding
system provides a lower resistance
ground path and greater resistance to
corrosion than steel mounting systems
High-impact, abuse-resistant
nylon face
Boss diameter is 1.562"
on 20 and 30A devices for
simplifying installation and
accessory selection
Wire restraint recess
for both back and side
wiring, greatly reduces the
possibility of loosening
the terminal connection
Glass-Reinforced thermoplastic
polyester base (RTP) has the
desirable characteristics of a
thermoset material, including
heat, flame resistance and
dimensional stability. The
impact resistance it provides,
however, is much greater than
that of a thermoset
HBL2310
#10 silicon bronze terminal screw provides
greater strength and resistance to corrosion
and stripping. Anti-rotational clamp has a
stop to limit the amount of cocking when
only one side is used. Accommodates both
back and side wiring
One-piece contact with long
spring arm (low stress) and oxide
cutting nibs: prevents stress and
overheating associated with riveted
contact and short spring arms
Twist-Lock® receptacles combine functional design features,
unparalleled quality to deliver pace-setting performance.
The high-impact nylon face of each Hubbell Twist-Lock
receptacle has a colored ring. Keyed to an internationally
recognized color coding scheme, this ring enables mating
devices to be matched quickly. It's just one more example
of user-oriented thinking at Hubbell.
The terminals in each Hubbell Twist-Lock receptacle are
mechanically and electrically the finest available. These
terminals incorporate unique design features to contain
and hold conductors, including an external back wiring
“wraparound” clamp, a wire restraint recess and more.
The materials used in every receptacle are of the highest
quality. The all brass mounting system provides a safer,
lower resistance ground path than those made of steel.
The thick wall base is constructed of an engineered
thermoplastic to offer the benefits of a thermoset, yet with
much greater impact resistance.
Hubbell Twist-Lock Receptacles: Voltage color coding on
the outside. Proven designs and quality materials on the
inside. Any way you look at them, they are the standard
of the industry.
125V
www.hubbell-wiring.com
250V
®
277V AC
480V AC
Wiring Device-Kellems
600V AC
125/250V
B-13
Twist-Lock® Devices
Watertight Safety-Shroud® Twist-Lock® System
Features and Benefits
Catalog number and color-coded
voltage rating are easily visible
even when in use
Closure cap is included for environmental
seal when device is not in use
Alignment arrows and lock and unlock
symbols provide a visual indication that
devices are properly connected
One-piece, engineered
thermoplastic housing
is impact-resistant for
heavy-duty industrial
environments
External keying
provides
quick mating
of devices
All screws are #10
multiple drive head
Cord grip screw recess
minimizes screwdriver
slippage
HBL2733SW
Blades are recessed
for protection against
bending and breaking
HBL2731SW
One-step automatic Thermoplastic
Elastomer (TPE) seal and engineered
thermoplastic guard assure sealing
when device is fully connected
Note: Works with Mechanical Interlocks, see page B-39 for additional information.
B-14
TPE Gland Seal
Assorted glands accommodate a wide range
of cord sizes from #16-3 Type SJ to #8-5
Type S, SO
Spring-Loaded Cover
One-step push-to-close spring-loaded cover
with latch allows for fast opening and closing
of lift cover. Result: environmental sealing is
assured
Panel or Box Mount Receptacles
and Inlets
• High impact, thermoplastic housing for
heavy-duty industrial environments.
• Catalog number and color-coded
voltage rating are easily visible when
in use.
• Stainless Steel 302/304, #10 multiple
drive head mounting screws provide
corrosion resistance.
• Mounting screw recesses minimize
screwdriver slippage.
• Lockout/tagout hole on inlets allow
compliance to OSHA regulation 29
CFR 1910.147.
• TPE closure cap provided with inlets
for environmental seal when not in use.
• Accepts all mating NEMA locking plugs
and most connector bodies, allowing
interchangeability with existing devices.
Safety-Shroud
• Virtually eliminates bent and broken plug
blades, leading to longer equipment life.
• Extends life of mating receptacles by
eliminating damage caused by insertion
of bent blades.
• Extra protection for personnel by
significantly reducing chance of
inadvertent contact with blades when
connecting or disconnecting energized
receptacles and connector bodies.
• Reduces exposure to arcing when
connecting or disconnecting plugs
under load.
• Compliance with California Code of
Regulations, Title 8, Article 51, subsection
2510.7(b), which requires shrouding for
devices exceeding 300 volts.
• Lockout/tagout hole allows compliance
with OSHA regulation 29 CFR 1910.147.
• Sealing gland and thermoplastic guard
assure sealing when fully connected.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Safety-Shroud® Twist-Lock® System
Features and Benefits
Alignment arrows with lock and unlock
symbols provide a visual indication that
devices are properly connected
Catalog number and
color-coded voltage
rating are visible even
when in use
Accepts conventional
NEMA locking plugs
HBL2611S
Impact resistant shroud made
of engineered thermoplastic
protects blades against bending
or breaking
External keying on plug
devices allows quick
mating of devices
Note: All screws are #10 multiple drive head.
Lockout/tagout hole
allows compliance with
OSHA regulation 29
CFR 1910.147
Engineered thermoplastic housing is impact
and corrosion resistant, making it suitable for
heavy-duty industrial environments
HBL2610SR
Safety-Shroud® Plug Features and Benefits
• Mates with most NEMA locking
connector bodies.
• Virtually eliminates bent and broken
plug blades.
• Provides protection for personnel by
reducing chance of inadvertent contact with
blades when connecting or disconnecting
energized devices.
• Reduces exposure to arcing when
connecting or disconnecting under load.
• Extends life of mating receptacles by
eliminating damage caused by insertion of
bent blades.
• Complies with California Code of Regulation,
which requires shrouding for devices
exceeding 300 volts.
• Lockout/tagout hole allows compliance to
OSHA regulation 29 CFR 1910.147.
• Allows engagement with Mechanical Interlock
Enclosure which virtually prevents make and
break under load.
Safety-Shroud® Twist-Lock® Receptacles (Recommended Installations)
The Safety-Shroud Twist-Lock single gang receptacles
were designed to mount in virtually all standard and
FS/FD type boxes, allowing easy conversion of
existing NEMA locking receptacles to Safety-Shroud
Twist-Lock Receptacles.
The semi-flush receptacles install in (RACO type
242/255) boxes, with ½ raised 2-gang device mount
covers (RACO type 778/841) and a 2-gang FD type
box. Standard 4" and 4¹¹⁄₁₆" square boxes 2¹⁄₈" deep.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-15
Twist-Lock® Devices
Compatibility and Environmental Protection Chart
Watertight Safety-Shroud®, Safety-Shroud® and NEMA Devices
Twist-Lock®
Connector Bodies
Twist-Lock® Receptacles
Watertight SafetyWatertight
Shroud Mechanical
Safety-Shroud Interlock Enclosure
Safety-Shroud
Switched
Enclosure
NEMA
Watertight
Safety-Shroud
Insulgrip
Twist-Lock® Plugs
YES
Type 4X,
Type 12
YES
Type 4X,
Type 12K
YES
Type 1
NO
NO
YES
Type 4X,
Type 12
YES
Type 1
Safety-Shroud
YES
Type 1
YES
Type 1
YES
Type 1
NO
NO
YES
Type 1
YES
Type 1
Insulgrip
YES
Type 1
NO
YES
Type 1
YES
Type 3R
YES
Type 1
YES
Type 1
YES
Type 1
NEMA
NA
NA
NA
NA
NA
NO
YES
Type 1
Watertight Safety-Shroud
NA
NA
NA
NA
NA
YES
Type 4X,
Type 12
YES
Type 1
Watertight Safety-Shroud
Twist-Lock® Inlets
Type
Type
Type
Type
Type
YES
NO
NA
1
3R
4X
12
12K
Indoor
Raintight
Hose-directed water and corrosion resistant
Dust tight, drip-proof without knockouts
Dust tight, drip-proof with knockouts
Interchangeable
Does not interchange
Not Applicable
Note: See Technical section for full description of enclosure types.
B-16
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Ampere, 250 Volts
2 Pole, 2 Wire, Non-Grounding
20A 250V
NEMA L2-20P
UL Listed
2 HP
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon, polarized. Multiple drive screws.
.220"-.720"
(5.6-18.3)
HBL7102C
1.91"
(48.5)
1.53"
(38.9)
Note: See page B-49 for accessories.
HBL7102C
2.56"
(65.0)
2.19"
(55.6)
Flanged Inlets
Description
Catalog Number
Nylon casing, back wired, polarized. Multiple drive screws.
HBL8815C
Note: See page B-48 for accessories.
.16"
(4.1)
DIA.
1.72"
(43.7)
1.69"
(42.9)
HBL8815C
20A 250V
NEMA L2-20R
UL Listed
2 HP
Connector Bodies
Description
Cord Dia.
Catalog Number
Black and white nylon. Multiple drive screws.
.220"-.720"
(5.6-18.3)
HBL7101C
2.78"
(70.6)
1.41"
(35.8)
1.53"
(38.9)
Note: See page B-49 for accessories.
HBL7101C
Receptacles
Description
Catalog Number
Single, black phenolic.
HBL7210B
Single, mounted on 4" (101.6) round box cover,
black phenolic.
HBL7217B
Note: See pages B-48 and B-49 for accessories.
1.30"
(33.0)
1.41"
(35.8)
1.39" 2.38" 3.28"
(35.3) (60.5) (83.3)
2.09"
(53.1)
Flanged Receptacles
Description
Catalog Number
Insulgrip nylon casing, back wired. Multiple drive screws.
HBL8809C
Metal flange, stainless steel casing, black phenolic,
exposed terminals.
HBL3226
Note: See pages B-48 and B-49 for accessories.
Only receptacles and plugs are HP rated.
HP ratings are AC only.
1.11"
(28.2)
#6-32 TAP
HBL7210B
2.56"
(65.0)
2.19"
(55.6)
.16"
(4.1)
DIA.
1.72"
(43.7)
1.69"
(42.9)
HBL8809C
1.88"
(47.8)
.16"
(4.1)
DIA.
1.83"
(46.4)
1.42"
(36.1)
HBL3226
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-17
Twist-Lock® Devices
20 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
W
X
G
G
Y
20A 125V
NEMA L5-20P
UL/CSA
1 HP
Plugs
Watertight Safety-Shroud®
2.78"
(70.6)
4.50"
(114.3)
IP66 SUITABILITY
2.26"
(57.4)
2.04"
(51.8)
20A 277V AC
NEMA L7-20P
UL/CSA
2 HP
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.360"-.930"
(9-24)
HBL2311SW
Description
Cord Dia.
Catalog Number
Black and white nylon body,
white Valox® shroud. Can be used
with the Insulgrip Connector Bodies.
.360"-.930"
(9-24)
HBL2311S
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL2311
HBL2321
Corrosion resistant,
yellow nylon.
.360"-.930"
(9-24)
HBL23CM11
HBL23CM21
–
All black nylon.
.360"-.930"
(9-24)
HBL2311BK
HBL2321BK
–
Cord clamps with removable
nserts. All black nylon.
.360"-.930"
(9-24)
HBL2311EBK
HBL2321EBK
–
Description
Cord Dia.
Catalog Number
Yellow nylon.
.325"-.720"
(8.26-18.3)
HBL2311VY
Corrosion resistant,
yellow nylon.
.325"-.720"
(8.26-18.3)
HBL23CM11V
Black nylon.
.325"-.720"
(8.26-18.3)
HBL2311VBK
HBL2321SW
Safety-Shroud®
HBL2321SW
IP20
HBL2331SW
SUITABILITY
HBL2321S
HBL2331S
Note: See page B-40 for accessories.
Insulgrip®
3.97"
(100.8)
HBL2321S
2.75"
(69.9)
2.26"
(57.4)
1.97"
(50.0)
IP20
Valise®
2.50"
(63.5)
1.78"
(45.2)
HBL2311VY
HBL2331
IP20
SUITABILITY
HBL2321VY
HBL2331VY
–
–
HBL2321VBK
HBL2331VBK
Note: See page B-51 for accessories.
2.28"
(57.9)
Flanged Inlets
Watertight Safety-Shroud®
3.75"
(95.3)
Description
Valox®
1.63"
(41.4)
IP66 SUITABILITY
Gray
housing and flange,
reverse service (Not shown).
HBL2315SW
HBL2325SW
–
HBL2325SWR
HBL2325SW
2.88"
(73.2)
.19"
(4.8)
DIA.
120°
120°
HBL2335SW
–
Note: See page B-54 for accessories.
Insulgrip®
3.75"
(95.3)
UL Type 4x, 12
Catalog Number
Gray Valox® housing and flange.
1.25" R.
(31.8)
SUITABILITY
Note: See page B-51 for accessories.
HBL2311
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL2315
SUITABILITY
HBL2325
HBL2335
Note: See page B-50 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock
and Watertight Safety-Shroud devices.
See page B-74 for technical information on Valise® plugs and connectors.
2.09"
(53.1)
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
2.04"
(51.8)
HBL2315
Dimensions in Inches (mm)
B-18
20A 250V
NEMA L6-20P
UL/CSA
2 HP
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
W
X
G
W
G
G
Y
20A 125V
NEMA L5-20R
UL/CSA
1 HP
Connector Bodies
Watertight Safety-Shroud®
20A 250V
NEMA L6-20R
UL/CSA
2 HP
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.360"-.930"
(9-24)
HBL2313SW
Insulgrip®
20A 277V AC
NEMA L7-20R
UL/CSA
2 HP
UL Type 4x, 12
HBL2323SW
IP20
HBL2333SW
2.56"
(65.0)
4.38"
(111.1)
SUITABILITY
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL2313
HBL2323
Corrosion resistant,
yellow nylon.
.360"-.930"
(9-24)
HBL23CM13
HBL23CM23
–
All black nylon.
.360"-.930"
(9-24)
HBL2313BK
HBL2323BK
–
Cord clamps with removable
inserts. All black nylon.
.360"-.930"
(9-24)
HBL2313EBK
HBL2323EBK
–
HBL2323SW
HBL2333
3.86"
(98.0)
2.26"
(57.4)
1.97"
(50.0)
HBL2313
Note: See page B-51 for accessories.
2.60"
(66.0)
Valise®
IP20
SUITABILITY
Description
Cord Dia.
Catalog Number
Yellow nylon.
.325"-.720"
(8.26-18.3)
HBL2313VY
HBL2323VY
Black nylon.
.325"-.720"
(8.26-18.3)
HBL2313VBK
HBL2323VBK
–
1.78"
(45.2)
HBL2333VBK
HBL2313VY
Note: See page B-51 for accessories.
2.69"
(68.3)
Receptacles
Watertight Safety-Shroud®
Description
Gray
Valox®
IP66 SUITABILITY
UL Type 4x, 12
3.75"
(95.3)
Catalog Number
housing and flange, back wired.
HBL2310SW
HBL2320SW
HBL2330SW
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
3.75"
(95.3)
SUITABILITY
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
HBL2310AR
HBL2320AR
HBL2330AR
Gray Valox® surface mounting, one gang, back wired. HBL2310SR
HBL2320SR
HBL2330SR
Gray Valox® semi-flush, two gang, back wired.
HBL2320SR2
HBL2330SR2
HBL2310SR2
HBL2320SW
3.14"
(79.8)
Note: See page B-54 for accessories.
4.57"
(116.1)
Single Flush Receptacles
IP20
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
HBL2310
HBL2320
Blue nylon face, back and side wired.
HBL2310M7
HBL2320M4
–
Isolated ground, orange nylon face,
back and side wired.
IG2310
IG2320
–
Corrosion resistant, yellow nylon face,
back and side wired.
HBL23CM10
Ring terminal connection.
HBL2310RT
HBL2330
–
2.88"
(73.2)
HBL2320AR
1.58"
(40.1)
–
HBL2320RT
–
Note: See page B-50 for accessories.
Insulgrip®
1.50"
(38.1)
4.56"
(115.8)
Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2316
HBL2326
HBL2336
Note: See page B-50 for accessories.
HBL2320SR
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
2.84"
(72.1)
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-19
Twist-Lock® Devices
20 Ampere, 125/250, 3Ø 250 and 3Ø 480 Volts AC
3 Pole, 4 Wire Grounding
X
W
Plugs
G
4.50"
(114.3)
2.33"
(59.2)
X
G
Y
G
Z
Z
20A 125/250V AC
NEMA L14-20P
UL/CSA
2 (1) HP
20A 3Ø 250V AC
NEMA L15-20P
UL/CSA
3 HP
20A 3Ø 480V AC
NEMA L16-20P
UL/CSA
5 HP
IP66 SUITABILITY
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2411SW
Description
Cord Dia.
Catalog Number
Black and white nylon body,
white Valox® shroud. Can be
used with the Insulgrip
Connector Bodies.
.350"-1.150"
(9-29)
HBL2411S
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2411
HBL2421
HBL2431
Corrosion resistant,
yellow nylon.
.350"-1.150"
(9-29)
HBL24CM11
HBL24CM21
HBL24CM31
All black nylon.
.350"-1.150"
(9-29)
HBL2411BK
HBL2421SW
Safety-Shroud®
HBL2421SW
2.21"
(56.1)
Y
Y
Watertight Safety-Shroud®
2.94"
(74.7)
X
IP20
HBL2431SW
SUITABILITY
HBL2421S
HBL2431S
Note: See page B-40 for accessories.
Insulgrip®
4.12"
(104.6)
HBL2421S
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
IP20
SUITABILITY
–
–
Note: See page B-53 for accessories.
HBL2411
Flanged Inlets
Watertight Safety-Shroud®
2.44"
(62.0)
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange.
HBL2415SW
UL Type 4x, 12
HBL2425SW
HBL2435SW
Note: See page B-54 for accessories.
3.75"
(95.3)
Insulgrip®
1.81"
(46.0)
3.75"
(95.3)
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL2415
SUITABILITY
HBL2425
HBL2435
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock
and Watertight Safety-Shroud devices.
HBL2425SW
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
2.27"
(57.7)
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
2.23"
(56.6)
HBL2415
Dimensions in Inches (mm)
B-20
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Ampere, 125/250, 3Ø 250 and 3Ø 480 Volts AC
3 Pole, 4 Wire Grounding
X
X
G
Connector Bodies
W
G
X
Y
G
Y
Y
Z
Z
20A 125/250V AC
NEMA L14-20R
UL/CSA
2 (1) HP
20A 3Ø 250V AC
NEMA L15-20R
UL/CSA
3 HP
20A 3Ø 480V AC
NEMA L16-20R
UL/CSA
5 HP
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2413SW
Insulgrip®
UL Type 4x, 12
HBL2423SW
IP20
HBL2433SW
2.75"
(69.9)
4.38"
(111.1)
SUITABILITY
HBL2423SW
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2413
HBL2423
HBL2433
Corrosion resistant,
yellow nylon.
.350"-1.150"
(9-29)
HBL24CM13
HBL24CM23
HBL24CM33
All black nylon.
.350"-1.150"
(9-29)
HBL2413BK
–
–
3.86"
(98.0)
2.33"
(59.2 )
2.21"
(56.1)
Note: See page B-53 for accessories.
Receptacles
HBL2413
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2410SW
UL Type 4x, 12
HBL2420SW
2.91"
(73.9)
HBL2430SW
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
HBL2410AR
Gray
Valox®
surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
SUITABILITY
HBL2420AR
3.75"
(95.3)
HBL2430AR
HBL2410SR
HBL2420SR
HBL2430SR
HBL2410SR2
HBL2420SR2
HBL2430SR2
3.75"
(95.3)
Note: See page B-54 for accessories.
1.75"
(44.5)
HBL2420SW
Single Flush Receptacles
IP20
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
HBL2410
HBL2420
Isolated ground, orange nylon face,
back and side wired.
IG2410
IG2420
–
Ring terminal connection.
HBL2410RT
HBL2420RT
–
3.14"
(79.8)
HBL2430
4.57"
(116.1)
Note: See page B-52 for accessories.
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2416
HBL2426
2.85"
(72.4)
HBL2436
HBL2420AR
Note: See page B-52 for accessories.
3.06"
(77.7)
1.70"
(43.2)
120°
1.23"
(31.2)
1.71"
(43.4)
.77"
(19.6)
1.34" R
(34.0)
.19"
(4.8) 120°
DIA.
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
5.12"
(130.0)
4.56"
(115.8)
2.27"
(57.7)
2.23"
(56.6)
HBL2416
#6-32
TAP
HBL2410
.98"
(24.9)
5.12"
(130.0)
2.84"
(72.1)
HBL2420SR2
HBL2420SR
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-21
Twist-Lock® Devices
20 Ampere, 347, 480, 600 and 125/250 Volts AC
2 Pole, 3 Wire Grounding and 3 Pole, 3 Wire Non-Grounding
X
W
IP20
2.26"
(57.4)
1.97"
(50.0)
G
Y
20A 347V AC
NEMA L24-20P
UL/CSA
Plugs
G
Y
SUITABILITY
2.75"
(69.9)
X
G
Y
20A 480V AC
NEMA L8-20P
UL/CSA
3 HP
20A 600V AC
NEMA L9-20P
UL/CSA
20A 125/250V AC
NEMA L10-20P
UL/CSA
2 (1) HP
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL3721
HBL2341
HBL2351
–
Black and white nylon
(Not shown).
.300"-1.050"
(7.6-26.7)
–
–
–
HBL2361
HBL2345
HBL2355
HBL2365
Note: See page B-51 for accessories.
HBL2341
2.88"
(73.2)
Flanged Inlets
120°
1.25" R.
(31.8)
.19" 120°
(4.8)
DIA.
Description
Catalog Number
Nylon casing, back wired.
HBL3725
Note: See page B-50 for accessories.
Connector Bodies
HBL2345
3.86"
(98.0)
2.26"
(57.4)
1.97"
(50.0)
G
G
G
SUITABILITY
2.04"
(51.8)
X
X
W
IP20
2.09"
(53.1)
Y
20A 347V AC
NEMA L24-20R
UL/CSA
Y
Y
20A 480V AC
NEMA L8-20R
UL/CSA
3 HP
20A 600V AC
NEMA L9-20R
UL/CSA
20A 125/250V AC
NEMA L10-20R
UL/CSA
2 (1) HP
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL3723
HBL2343
HBL2353
–
Black and white nylon
(Not shown).
.300"-1.050"
(7.6-26.7)
–
–
–
HBL2363
HBL2340
Note: See page B-51 for accessories.
Single Flush Receptacles
HBL2343
1.70"
(43.2)
1.23"
(31.2)
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
Description
Catalog Number
Black nylon face, back and side wired.
HBL3720
HBL2350
HBL2360
Watertight Safety-Shroud®,
gray Valox® housing and flange,
back and side wired, (Not shown).
–
HBL2340SW
–
–
Isolated ground, orange nylon face,
back and side wired.
–
IG2340
–
–
HBL2356
HBL2366
Note: See page B-50 for accessories.
Flanged Receptacles
#6-32 TAP
.98"
(24.9)
Catalog Number
Nylon casing, back wired.
HBL3726
HBL2346
Note: See page B-50 for accessories.
See page B-69 for technical information.
See page B-37 for switched enclosure.
See page B-40 for Add-A-Shroud® kit. For use with connector bodies.
Only receptacles and plugs up to 480V AC are HP rated.
HP ratings are AC only.
HBL2340
2.88"
(73.2)
Description
120°
1.25" R.
(31.8)
120°
.19"
(4.8)
DIA.
2.09"
(53.1)
2.04"
(51.8)
HBL2346
Dimensions in Inches (mm)
B-22
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Ampere, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 4 Wire Non-Grounding
X
IP20
X
W
Y
Y
W
Z
Z
Z
20A 3ØY
120/208V AC
NEMA L18-20P
UL Listed
2 HP
20A 3ØY
277/480V AC
NEMA L19-20P
UL Listed
5 HP
20A 3ØY
347/600V AC
NEMA L20-20P
UL Listed
SUITABILITY
Plugs
X
W
Y
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2441
HBL2451
HBL2461
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
Note: See page B-53 for accessories.
Flanged Inlets
HBL2441
Description
Catalog Number
Nylon casing, back wired.
HBL2445
HBL2455
HBL2465
3.06"
(77.7)
Note: See page B-52 for accessories.
120°
1.34" R.
(34.0)
X
IP20
SUITABILITY
Connector Bodies
X
Y
W
W
X
Y
W
Y
Z
Z
Z
20A 3ØY
120/208V AC
NEMA L18-20R
UL Listed
2 HP
20A 3ØY
277/480V AC
NEMA L19-20R
UL Listed
5 HP
20A 3ØY
347/600V AC
NEMA L20-20R
UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2443
HBL2453
.19" 120°
(4.8)
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2445
HBL2463
Note: See page B-53 for accessories.
2.33"
(59.2)
2.21"
(56.1)
Single Flush Receptacles
Description
Catalog Number
Black nylon face, back and side wired.
HBL2440
HBL2450
3.86"
(98.0)
HBL2460
HBL2443
Note: See page B-52 for accessories.
1.70"
(43.2)
Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2446
HBL2456
1.23"
(31.2)
HBL2466
Note: See page B-52 for accessories.
See page B-69 for technical information.
See page B-37 for switched enclosure.
See page B-40 for Add-A-Shroud® kit. For use with connector bodies.
Only receptacles and plugs up to 480V AC are HP rated.
HP ratings are AC only.
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
#6-32 TAP
.98"
(24.9)
HBL2440
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19" 120°
(4.8)
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2446
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-23
Twist-Lock® Devices
20 Ampere, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 5 Wire Grounding
X
Y
Plugs
G
4.50"
(114.3)
G
W
20A 3ØY
120/208V AC
NEMA L21-20P
UL/CSA
2 HP
20A 3ØY
277/480V AC
NEMA L22-20P
UL/CSA
5 HP
20A 3ØY
347/600V AC
NEMA L23-20P
UL/CSA
IP66 SUITABILITY
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2511SW
Cord Dia.
Catalog Number
UL Type 4x, 12
–
IP20
Black and white nylon body,
.350"-1.150"
white Valox® shroud. Can be used (9-29)
with the Insulgrip Connector Bodies.
Y
Z
Description
Description
G
X
W
Z
Safety-Shroud®
HBL2511SW
Y
Z
Watertight Safety-Shroud®
2.94"
(74.7)
X
W
HBL2511S
–
SUITABILITY
–
–
Note: See page B-40 for accessories.
2.33"
(59.3)
2.21"
(56.1)
4.12"
(104.6)
HBL2511S
2.75"
(69.8)
2.33"
(59.2)
2.21"
(56.1)
Insulgrip®
IP20
SUITABILITY
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2511
All black nylon.
.350"-1.150"
(9-29)
HBL2511BK
–
–
Corrosion resistant,
yellow nylon.
.350"-1.150"
(9-29)
HBL25CM11
–
–
Black and white for flat cable.
.350"-1.150"
(9-29)
HBL2511FC
–
–
HBL2521
HBL2531
Note: See page B-53 for accessories.
Flanged Inlets
HBL2511
Watertight Safety-Shroud®
2.44"
(62.0)
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange.
HBL2515SW
UL Type 4x, 12
–
–
Note: See page B-52 for accessories.
Insulgrip®
3.75"
(95.3)
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL2515
SUITABILITY
HBL2525
HBL2535
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock
and Watertight Safety-Shroud devices.
1.81"
(46.0)
3.75"
(95.3)
HBL2515SW
3.06"
(77.7)
120°
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
1.34" R.
(34.0)
.19"
(4.8)
DIA.
120°
2.27"
(57.7)
2.23"
(56.6)
HBL2515
Dimensions in Inches (mm)
B-24
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
20 Ampere, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 5 Wire Grounding
X
W
Connector Bodies
X
G
Y
20A 3ØY
277/480V AC
NEMA L22-20R
UL/CSA
5 HP
20A 3ØY
347/600V AC
NEMA L23-20R
UL/CSA
IP66 SUITABILITY
HBL2513SW
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
HBL2513
Insulgrip®
UL Type 4x, 12
–
IP20
Corrosion resistant,
yellow nylon.
Black and white for flat cable.
G
20A 3ØY
120/208V AC
NEMA L21-20R
UL/CSA
2 HP
.350"-1.150"
(9-29)
All black nylon.
G
Z
Catalog Number
Black
housing,
white Valox® clamps.
X
W
Y
Z
Cord Dia.
Valox®
W
Z
Watertight Safety-Shroud®
Description
Y
2.75"
(69.9)
–
4.38"
(111.1)
SUITABILITY
HBL2513SW
HBL2523
HBL2533
HBL2513BK
–
–
HBL25CM13
–
–
HBL2513FC
–
–
2.33"
(59.3)
2.21"
(56.1)
3.86"
(98.0)
Note: See page B-53 for accessories.
HBL2513
Receptacles
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2510SW
2.91"
(73.9)
UL Type 4x, 12
–
–
Note: See page B-54 for accessories.
3.75"
(95.3)
Safety-Shroud® Twist-Lock®
IP20
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
Gray Valox® surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
HBL2510AR
HBL2510SR
HBL2510SR2
SUITABILITY
–
–
–
–
–
–
HBL2510SW
Note: See page B-54 for accessories.
Single Flush Receptacles
IP20
Description
Catalog Number
Black nylon face, back and side wired.
Isolated ground, orange nylon face,
back and side wired.
HBL2510
IG2510
SUITABILITY
HBL2520*
–
1.75"
(44.5)
3.75"
(95.3)
3.14"
(79.8)
HBL2530*
–
4.57"
(116.1)
Note: *Not Fed Spec.
See page B-52 for accessories.
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2516
HBL2526
HBL2536
2.88"
(73.2)
Note: See page B-52 for accessories.
HBL2510AR
1.70"
(43.2)
3.06"
(77.7)
120°
1.23"
(31.2)
1.34" R.
(34.0)
.19"
(4.8)
DIA.
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
120°
1.71"
(43.4)
.77"
(19.6)
5.12"
(130.0)
4.56"
(115.8)
2.27"
(57.7)
2.23"
(56.6)
HBL2516
#6-32 TAP
5.12"
(130.0)
.98"
(24.9)
HBL2510
HBL2510SR2
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
2.84"
(72.1)
HBL2510SR
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-25
Twist-Lock® Devices
30 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
X
W
G
G
Y
30A 125V
NEMA L5-30P
UL/CSA
2 HP
Plugs
Watertight Safety-Shroud®
2.78"
(70.6)
4.50"
(114.3)
HBL2611SW
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.325"-.930"
(9-24)
HBL2611SW
Safety-Shroud®
Description
2.26"
(57.4)
2.04"
(51.8)
30A 250V
NEMA L6-30P
UL/CSA
2 HP
IP20
Cord Dia.
Black and white nylon body,
.360"-.930"
white Valox® shroud. Can be used (9-24)
with the Insulgrip Connector Bodies.
30A 277V AC
NEMA L7-30P
UL/CSA
3 HP
UL Type 4x, 12
HBL2621SW
–
HBL2621S
–
SUITABILITY
Catalog Number
HBL2611S
Note: See page B-40 for accessories.
Insulgrip®
3.97"
(100.8)
HBL2621S
2.75"
(69.9)
2.26"
(57.4)
1.97"
(50.0)
HBL2621
IP20
SUITABILITY
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL2611
HBL2621
Heat stabilized, gray nylon,
220° F (104° C).
.360"-.930"
(9-24)
HBL2611F
HBL2621F
–
Corrosion resistant, yellow nylon.
.360"-.930"
(9-24)
HBL26CM11
HBL26CM21
–
All black nylon.
.360"-.930"
(9-24)
HBL2611BK
HBL2621BK
–
Description
Cord Dia.
Catalog Number
Yellow nylon.
.590"-.930"
(15.0-23.6)
HBL2611VY
Corrosion resistant, yellow nylon.
.590"-.930"
(15.0-23.6)
HBL26CM11V
Black nylon.
.590"-.930"
(15.0-23.6)
HBL2611VBK
HBL2631
Note: See page B-51 for accessories.
Valise®
2.50"
(63.5)
1.78"
(45.2)
HBL2611VY
IP20
SUITABILITY
HBL2621VY
–
–
–
HBL2621VBK
–
Note: See page B-51 for accessories.
2.28"
(57.9)
Flanged Inlets
Watertight Safety-Shroud®
3.75"
(95.3)
1.63"
(41.4)
3.75"
(95.3)
Gray Valox® housing and flange.
HBL2615SW
Reverse service, gray Valox® housing
and flange (use with HBL2613SR),
(Not shown).
HBL2615SWR
Insulgrip®
2.88"
(73.2)
120°
1.25" R.
(31.8)
2.09"
(53.1)
Catalog Number
UL Type 4x, 12
HBL2625SW
–
–
–
Note: See page B-54 for accessories.
HBL2615SW
.19"
(4.8) 120°
DIA.
IP66 SUITABILITY
Description
IP20
SUITABILITY
Description
Catalog Number
Nylon casing, back wired.
HBL2615
HBL2625
Heat stabilized, gray nylon, 220° F (104° C).
HBL2615F
HBL2625F
–
Nylon casing, weather protective, die cast
aluminum, back wired, self closing lift cover.
HBL2615M3
–
–
HBL2635
Note: See page B-50 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock and Watertight Safety-Shroud devices.
See page B-74 for technical information on Valise plugs and connectors.
2.04"
(51.8)
HBL2625
Dimensions in Inches (mm)
B-26
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 3 Wire Grounding
X
W
G
W
G
G
Y
30A 125V
NEMA L5-30R
UL/CSA
2 HP
Connector Bodies
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
Reverse service, black Valox®
housing, white Valox® clamps (use
with HBL2615SWR), (Not shown).
.360"-.930"
(9-24)
.360"-.930"
(9-24)
HBL2613SW
HBL2613SR
Insulgrip®
30A 277V AC
NEMA L7-30R
UL/CSA
3 HP
30A 250V
NEMA L6-30R
UL/CSA
2 HP
UL Type 4x, 12
HBL2623SW
–
–
IP20
3.86"
(98.0)
Cord Dia.
Catalog Number
.360"-.930"
(9-24)
.360"-.930"
(9-24)
.360"-.930"
(9-24)
.360"-.930"
(9-24)
HBL2613
HBL2623
HBL2613F
HBL2623F
–
HBL26CM13
HBL26CM23
–
HBL2613BK
HBL2623BK
–
HBL2633
Note: See page B-51 for accessories.
IP20
Description
Cord Dia.
Catalog Number
Yellow nylon.
.590"-.930"
(15.0-23.6)
.590"-.930"
(15.0-23.6)
.590"-.930"
(15.0-23.6)
HBL2613VY
Corrosion resistant,
yellow nylon.
Black nylon.
HBL26CM13V
HBL2613VBK
HBL2613SW
SUITABILITY
Black and white nylon.
Valise®
4.38"
(111.1)
–
Description
Heat stabilized, gray nylon,
220° F (104° C).
Corrosion resistant,
yellow nylon.
All black nylon.
2.56"
(65.0)
2.26"
(57.4)
1.97"
(50.0)
HBL2623
2.60"
(66.0)
1.78"
(45.2)
SUITABILITY
HBL2623VY
–
HBL2613VY
–
–
2.69"
(68.3)
HBL2623VBK
–
3.75"
(95.3)
Note: See page B-51 for accessories.
Receptacles
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2610SW
UL Type 4x, 12
HBL2620SW
3.75"
(95.3)
HBL2610SW
–
3.14"
(79.8)
Note: See page B-54 for accessories.
Safety-Shroud®
1.50"
(38.1)
Twist-Lock®
IP20
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
Gray Valox® surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
HBL2610AR
HBL2610SR
HBL2610SR2
SUITABILITY
HBL2620AR
HBL2620SR
HBL2620SR2
–
–
–
4.57"
(116.1)
Note: See page B-54 for accessories.
Single Flush Receptacles
IP20
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
Blue nylon face, back and side wired.
Isolated ground, orange nylon face,
back and side wired.
Corrosion resistant, yellow nylon face,
back and side wired.
Ring terminal connection.
HBL2610
HBL2610M6
IG2610
HBL2620
HBL2620M6
IG2620
HBL2630
–
–
HBL26CM10
HBL26CM20
–
HBL2610RT
HBL2620RT
–
Note: See page B-50 for accessories.
2.88"
(73.2)
HBL2620AR
1.58"
(40.1)
4.56"
(115.8)
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
Heat stabilized, gray nylon, 220° F (104° C).
HBL2616
HBL2616F
HBL2626
HBL2626F
HBL2636
–
Note: See page B-50 for accessories.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
2.84"
(72.1)
HBL2620SR
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-27
Twist-Lock® Devices
30 Ampere, 125/250 and 3Ø 250 Volts AC
3 Pole, 4 Wire Grounding
X
W
30A 125/250V AC
NEMA L10-30P
UL/CSA
Plugs
Watertight Safety-Shroud®
2.94"
(74.7)
HBL2711SW
4.50"
(114.3)
Description
Cord Dia.
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
Black and white nylon body,
.350"-1.150"
white Valox® shroud. Can be used (9-29)
with the Insulgrip Connector Bodies.
2.33"
(59.3)
2.21"
(56.1)
4.12"
(104.6)
HBL2711S
30A 125/250V AC
NEMA L14-30P
UL/CSA
2 (2) HP
30A 3Ø 250V AC
NEMA L15-30P
UL/CSA
3 HP
IP66 SUITABILITY
UL Type 4x, 12
–
HBL2711SW
HBL2721SW
SUITABILITY
Catalog Number
–
HBL2711S
HBL2721S
Note: See page B-40 for accessories.
Insulgrip®
IP20
Description
Cord Dia.
Black and white nylon.
.350"-1.150"
(9-29)
.300"-.950"
(7.6-24.1)
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
Black and white nylon,
(Not shown).
Corrosion resistant, yellow nylon.
2.75"
(69.9)
G
Z
IP20
Cord Dia.
Y
G
Y
Catalog Number
Safety-Shroud®
Description
X
All black nylon.
SUITABILITY
Catalog Number
–
HBL2711
HBL2661
HBL2721
–
–
–
HBL27CM11
–
HBL2711BK
HBL27CM21
–
Note: See page B-53 for accessories.
2.33"
(59.2)
2.21"
(56.1)
Flanged Inlets
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
HBL2711
Gray Valox® housing and flange.
Reverse service, gray Valox® housing and
flange (use with HBL2713SR), (Not shown).
2.44"
(62.0)
UL Type 4x, 12
Catalog Number
–
–
HBL2715SW
HBL2715SWR
HBL2725SW
–
Note: See page B-54 for accessories.
Insulgrip®
3.75"
(95.3)
1.81"
(46.0)
3.75"
(95.3)
IP20
Description
Catalog Number
Nylon casing, back wired.
Nylon casing, back wired, (Not shown).
–
HBL2665
Nylon casing, weather protective, die cast aluminum,
back wired, self closing lift cover.
–
SUITABILITY
HBL2715
–
HBL2715M3
HBL2725
–
–
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock
and Watertight Safety-Shroud devices.
HBL2715SW
.87"
(22.1)
1.47"
(37.3)
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
4.56"
(115.8)
HBLMITL - For use with
Watertight Safety-Shroud
receptacles and reverse
service inlet, see page B-39.
2.27"
(57.7)
2.82"
(71.6)
2.23"
(56.6)
HBL2715M3
HBL2715
Dimensions in Inches (mm)
B-28
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Ampere, 125/250 and 3Ø 250 Volts AC
3 Pole, 4 Wire Grounding
X
G
30A 125/250V AC
NEMA L10-30R
UL/CSA
Connector Bodies
Watertight Safety-Shroud®
W
Cord Dia.
Black Valox® housing,
white Valox® clamps.
Reverse service, black Valox®
housing, white Valox® clamps (use
with HBL2715SWR), (Not shown).
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
Z
30A 125/250V AC
NEMA L14-30R
UL/CSA
2 (2) HP
30A 3Ø 250V AC
NEMA L15-30R
UL/CSA
3 HP
UL Type 4x, 12
Catalog Number
–
HBL2713SW
–
HBL2713SR
IP20
Description
Cord Dia.
Black and white nylon.
.350"-1.150"
(9-29)
.300"-.950"
(7.6-24.1)
.350"-1.150"
(9-29)
.350"-1.150"
(9-29)
HBL2723SW
2.75"
(69.9)
–
4.38"
(111.1)
HBL2713SW
Insulgrip®
All black nylon.
Y
G
Y
IP66 SUITABILITY
Description
Black and white nylon,
(Not shown).
Corrosion resistant, yellow nylon.
X
SUITABILITY
Catalog Number
HBL2713
HBL2663
HBL2723
–
2.33"
(59.2)
–
–
HBL27CM13
HBL27CM23
–
HBL2713BK
–
2.21"
(56.1)
3.86"
(98.0)
HBL2713
Note: See page B-53 for accessories.
2.91"
(73.9)
Receptacles
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
UL Type 4x, 12
Catalog Number
Gray Valox® housing and flange, back wired.
–
HBL2710SW
HBL2720SW
3.75"
(95.3)
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
Description
SUITABILITY
Catalog Number
Valox®
–
–
–
Gray
angle housing, one gang, back wired.
Gray Valox® surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
HBL2710AR
HBL2710SR
HBL2710SR2
HBL2720AR
HBL2720SR
HBL2720SR2
HBL2710SW
Note: See page B-54 for accessories.
Single Flush Receptacles
IP20
Description
Catalog Number
Black nylon face, back and side wired.
Black nylon face, back and side wired, (Not shown).
Isolated ground, orange nylon face,
back and side wired.
Ring terminal connection.
–
HBL2660
–
–
1.75"
(44.5)
3.75"
(95.3)
3.14"
(79.8)
SUITABILITY
HBL2710
–
IG2710
HBL2720
–
IG2720
HBL2710RT
HBL2720RT
4.57"
(116.1)
Note: See page B-52 for accessories.
2.88"
(73.2)
Insulgrip® Flanged Receptacles
Description
HBL2710AR
Catalog Number
–
Nylon casing, back wired.
HBL2716
HBL2726
Note: See page B-52 for accessories.
3.06"
(77.7)
1.70"
(43.2)
120°
1.23"
(31.2)
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
1.71"
(43.4)
.77"
(19.6)
4.56"
(115.8)
5.12"
(130.0)
2.27"
(57.7)
2.23"
(56.6)
HBL2716
5.12"
(130.0)
.98"
(24.9)
#6-32
TAP
HBL2710SR2
HBL2710
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
2.84"
(72.1)
HBL2710SR
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-29
Twist-Lock® Devices
30 Ampere, 3Ø 480 and 3Ø 600 Volts AC
3 Pole, 4 Wire Grounding
X
X
Y
Plugs
Watertight Safety-Shroud®
2.94"
(74.7)
HBL2731SW
Z
Z
30A 3Ø 480V AC
NEMA L16-30P
UL/CSA
10 HP
30A 3Ø 600V AC
NEMA L17-30P
UL/CSA
IP66 SUITABILITY
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing, white Valox® clamps.
.350"-1.150"
(9-29)
HBL2731SW
Description
Cord Dia.
Catalog Number
Black and white nylon body, white Valox® shroud.
Can be used with the Insulgrip Connector Bodies.
.350"-1.150"
(9-29)
HBL2731S
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2731
HBL2741
Corrosion resistant, yellow nylon.
.350"-1.150"
(9-29)
HBL27CM31
HBL27CM41
Safety-Shroud®
4.50"
(114.3)
G
Y
G
IP20
HBL2741SW
SUITABILITY
HBL2741S
Note: See page B-40 for accessories.
2.33"
(59.3)
2.21"
(56.1)
4.12"
(104.6)
HBL2731S
Insulgrip®
IP20
SUITABILITY
Note: See page B-53 for accessories.
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
Flanged Inlets
Watertight Safety-Shroud®
HBL2731
IP66 SUITABILITY
UL Type 4x, 12
Description
Catalog Number
Gray Valox® housing and flange.
HBL2735SW
HBL2745SW
Note: See page B-54 for accessories.
2.44"
(62.0)
Insulgrip®
3.75"
(95.3)
IP20
SUITABILITY
Description
Catalog Number
Nylon casing, back wired.
HBL2735
HBL2745
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock
and Watertight Safety-Shroud devices.
1.81"
(46.0)
3.75"
(95.3)
HBL2735SW
3.06"
(77.7)
120°
1.34" R.
(34.0)
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
.19"
(4.8) 120°
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2735
Dimensions in Inches (mm)
B-30
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Ampere, 3Ø 480 and 3Ø 600 Volts AC
3 Pole, 4 Wire Grounding
X
X
G
Connector Bodies
Watertight Safety-Shroud®
G
Y
Y
Z
Z
30A 3Ø 480V AC
NEMA L16-30R
UL/CSA
10 HP
30A 3Ø 600V AC
NEMA L17-30R
UL/CSA
IP66 SUITABILITY
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing, white Valox® clamps.
.350"-1.150"
(9-29)
HBL2733SW
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2733
HBL2743
Corrosion resistant, yellow nylon.
.350"-1.150"
(9-29)
HBL27CM33
HBL27CM43
Insulgrip®
IP20
HBL2743SW
2.75"
(69.9)
SUITABILITY
4.38"
(111.1)
HBL2733SW
3.86"
(98.0)
Note: See page B-53 for accessories.
2.33"
(59.3)
Receptacles
Watertight Safety-Shroud®
IP66 SUITABILITY
UL Type 4x, 12
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2730SW
2.21"
(56.1)
HBL2733
HBL2740SW
2.91"
(73.9)
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
3.75"
(95.3)
SUITABILITY
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
HBL2730AR
HBL2740AR
HBL2730SR
HBL2740SR
HBL2730SR2
HBL2740SR2
Gray
Valox®
surface mounting, one gang, back wired.
Gray Valox® semi-flush, two gang, back wired.
Note: See page B-54 for accessories.
3.75"
(95.3)
Single Flush Receptacles
IP20
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
HBL2730
1.75"
(44.5)
HBL2730SW
HBL2740
3.14"
(79.8)
Note: See page B-52 for accessories.
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2736
4.57"
(116.1)
HBL2746
Note: See page B-52 for accessories.
2.88"
(73.2)
HBL2730AR
1.70"
(43.2)
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8) 120°
DIA.
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
.77"
(19.6)
1.23"
(31.2)
5.12"
(130.0)
1.71"
(43.4)
4.56"
(115.8)
2.27"
(57.7)
2.23"
(56.6)
HBL2736
#6-32
TAP
5.12"
(130.0)
.98"
(24.9)
HBL2730SR2
HBL2730
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
2.84"
(72.1)
HBL2730SR
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-31
Twist-Lock® Devices
30 Ampere, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 5 Wire Grounding
X
Y
Plugs
G
4.50"
(114.3)
HBL2811SW
2.33"
(59.3)
HBL2811S
2.75"
(69.9)
2.33"
(59.2)
2.21"
(56.1)
Y
W
G
Z
30A 3ØY
120/208V AC
NEMA L21-30P
UL/CSA
3 HP
30A 3ØY
277/480V AC
NEMA L22-30P
UL/CSA
10 HP
30A 3ØY
347/600V AC
NEMA L23-30P
UL/CSA
IP66 SUITABILITY
UL Type 4x, 12
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2811SW
Description
Cord Dia.
Catalog Number
Black and white nylon body, white
Valox® shroud. Can be used with
the Insulgrip Connector Bodies.
.350"-1.150"
(9-29)
HBL2811S
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2811
Corrosion resistant, yellow nylon.
.350"-1.150"
(9-29)
HBL28CM11
–
–
Black and white for flat cable.
.350"-1.150"
(9-29)
HBL2811FC
–
–
All black nylon.
.350"-1.150"
(9-29)
HBL2811BK
–
–
HBL2821SW
IP20
HBL2831SW
SUITABILITY
–
–
Note: See page B-40 for accessories.
Insulgrip®
4.12"
(104.6)
G
X
W
Z
Safety-Shroud®
2.21"
(56.1)
Y
Z
Watertight Safety-Shroud®
2.94"
(74.7)
X
W
IP20
SUITABILITY
HBL2821
HBL2831
Note: See page B-53 for accessories.
HBL2811
Flanged Inlets
2.44"
(62.0)
Watertight Safety-Shroud®
3.75"
(95.3)
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange.
HBL2815SW
UL Type 4x, 12
–
–
Note: See page B-54 for accessories.
Insulgrip®
1.81"
(46.0)
3.75"
(95.3)
IP20
Description
Catalog Number
Nylon casing, back wired.
HBL2815
SUITABILITY
HBL2825
HBL2835
Note: See page B-52 for accessories.
See pages B-69 and B-70 for technical information on Twist-Lock
and Watertight Safety-Shroud devices.
HBL2815SW
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8)
DIA.
HBLMITL - For use with
Watertight Safety-Shroud
receptacles, see page B-39.
120°
2.27"
(57.2)
2.23"
(56.6)
HBL2815
Dimensions in Inches (mm)
B-32
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Ampere, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 5 Wire Grounding
X
W
Connector Bodies
X
Y
G
W
X
W
Y
G
G
Y
Z
Z
Z
30A 3ØY
120/208V AC
NEMA L21-30R
UL/CSA
3 HP
30A 3ØY
277/480V AC
NEMA L22-30R
UL/CSA
10 HP
30A 3ØY
347/600V AC
NEMA L23-30R
UL/CSA
Watertight Safety-Shroud®
IP66 SUITABILITY
Description
Cord Dia.
Catalog Number
Black Valox® housing,
white Valox® clamps.
.350"-1.150"
(9-29)
HBL2813SW
Insulgrip®
UL Type 4x, 12
HBL2823SW
IP20
2.75"
(69.9)
–
4.38"
(111.1)
SUITABILITY
HBL2813SW
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2813
Corrosion resistant, yellow nylon.
.350"-1.150"
(9-29)
HBL28CM13
–
–
Black and white for flat cable.
.350"-1.150"
(9-29)
HBL2813FC
–
–
All black nylon.
.350"-1.150"
(9-29)
HBL2813BK
–
–
HBL2823
HBL2833
2.33"
(59.3)
2.21"
(56.1)
3.86"
(98.0)
HBL2813
Note: See page B-53 for accessories.
Receptacles
Watertight
2.91"
(73.9)
Safety-Shroud®
IP66 SUITABILITY
Description
Catalog Number
Gray Valox® housing and flange, back wired.
HBL2810SW
UL Type 4x, 12
HBL2820SW
HBL2830SW
Note: See page B-54 for accessories.
Safety-Shroud® Twist-Lock®
IP20
Description
Catalog Number
Gray Valox® angle housing, one gang, back wired.
HBL2810AR
3.75"
(95.3)
SUITABILITY
–
Gray Valox® surface mounting, one gang, back wired.
HBL2810SR
–
–
Gray Valox® semi-flush, two gang, back wired.
HBL2810SR2
–
–
HBL2810SW
Note: See page B-54 for accessories.
Single Flush Receptacles
IP20
3.14"
(79.8)
SUITABILITY
Description
Catalog Number
Black nylon face, back and side wired.
HBL2810
Isolated ground, orange nylon face,
back and side wired.
IG2810
–
–
Ring terminal connection.
HBL2810RT
–
–
HBL2820
1.75"
(44.5)
3.75"
(95.3)
–
HBL2830
4.57"
(116.1)
Note: See page B-52 for accessories.
Insulgrip® Flanged Receptacles
2.88"
(73.2)
Description
Catalog Number
Nylon casing, back wired.
HBL2816
HBL2810AR
HBL2826
HBL2836
Note: See page B-52 for accessories.
1.70"
(43.2)
3.06"
(77.7)
120°
1.23"
(31.2)
1.34" R.
(34.0)
.19" 120°
(4.8)
DIA.
2.27"
(57.7)
2.23"
(56.6)
HBL2816
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
.77"
(19.6)
5.12"
(130.0)
#6-32 TAP
4.56"
(115.8)
5.12"
(130.0)
.98"
(24.9)
HBL2810
HBL2810SR2
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
1.71"
(43.4)
2.84"
(72.1)
HBL2810SR
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-33
Twist-Lock® Devices
30 Ampere, 3ØY 120/208, 277/480 and 347/600 Volts AC
4 Pole, 4 Wire Non-Grounding
X
IP20
Y
SUITABILITY
2.75"
(69.9)
Plugs
2.33"
(59.2)
2.21"
(56.1)
X
W
X
W
Y
W
Y
Z
Z
Z
30A 3ØY
120/208V AC
NEMA L18-30P
UL Listed
3 HP
30A 3ØY
277/480V AC
NEMA L19-30P
UL Listed
10 HP
30A 3ØY
347/600V AC
NEMA L20-30P
UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2751
HBL2761
HBL2771
HBL2765
HBL2775
Note: See page B-53 for accessories.
HBL2751
Flanged Inlets
3.06"
(77.7)
120°
Description
Catalog Number
Nylon casing, back wired.
HBL2755
Note: See page B-52 for accessories.
1.34" R.
(34.0)
.19"
(4.8)
DIA.
120°
X
2.27"
(57.7)
IP20
SUITABILITY
2.23"
(56.6)
HBL2755
Connector Bodies
3.86"
(98.0)
2.33"
(59.2)
2.21"
(56.1)
W
X
Y
W
Y
Z
Z
Z
30A 3ØY
120/208V AC
NEMA L18-30R
UL Listed
3 HP
30A 3ØY
277/480V AC
NEMA L19-30R
UL Listed
10 HP
30A 3ØY
347/600V AC
NEMA L20-30R
UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL2753
HBL2763
HBL2773
HBL2760
HBL2770
HBL2766
HBL2776
Note: See page B-53 for accessories.
Single Flush Receptacles
HBL2753
1.70"
(43.2)
X
Y
W
1.23"
(31.2)
Description
Catalog Number
Black nylon face, back and side wired.
HBL2750
Note: See page B-52 for accessories.
Flanged Receptacles
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
2.67"
(67.8)
HBL2750
#6-32 TAP
.98"
(24.9)
Description
Catalog Number
Nylon casing, back wired.
HBL2756
Note: See page B-52 for accessories.
See page B-69 for technical information on Twist-Lock devices.
3.06"
(77.7)
120°
1.34" R.
(34.0)
.19"
(4.8)
DIA.
120°
2.27"
(57.7)
2.23"
(56.6)
HBL2756
Dimensions in Inches (mm)
B-34
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
30 Ampere, 480 and 600 Volts AC
2 Pole, 3 Wire Grounding
X
X
IP20
G
G
SUITABILITY
Y
Y
30A 600V AC
NEMA L9-30P
UL/CSA
30A 480V AC
NEMA L8-30P
UL/CSA
5 HP
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon.
.325"-.930"
(8.25-24)
HBL2641
HBL2651
2.75"
(69.9)
2.26"
(57.4)
1.97"
(50.0)
Note: See page B-51 for accessories.
HBL2651
Flanged Inlets
Description
Catalog Number
Nylon casing, back wired.
HBL2645
2.88"
(73.2)
HBL2655
Note: See page B-50 for accessories.
120°
1.25" R.
(31.8)
120°
.19"
(4.8)
DIA.
IP20
G
Y
Y
SUITABILITY
2.04"
(51.8)
30A 600V AC
NEMA L9-30R
UL/CSA
30A 480V AC
NEMA L8-30R
UL/CSA
5 HP
Connector Bodies
2.09"
(53.1)
X
X
G
Description
Cord Dia.
Catalog Number
Black and white nylon.
.325"-.930"
(8.25-24)
HBL2643
HBL2655
3.86"
(98.0)
HBL2653
Note: See page B-51 for accessories.
2.26"
(57.4)
1.97"
(50.0)
Single Flush Receptacles
Description
Catalog Number
Black nylon face, back and side wired.
HBL2640
HBL2653
HBL2650
1.70"
(43.2)
Note: See page B-50 for accessories.
1.23"
(31.2)
Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL2646
HBL2656
2.67"
(67.8)
1.56" 2.38" 3.28"
(39.6) (60.5) (83.3)
Note: See page B-50 for accessories.
See page B-69 for technical information on Twist-Lock devices.
#6-32 TAP
.98"
(24.9)
HBL2650
2.88"
(73.2)
120°
1.25" R.
(31.8)
.19"
(4.8)
DIA.
120°
2.09"
(53.1)
2.04"
(51.8)
HBL2656
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-35
Twist-Lock® Devices
Switched Safety Enclosures
Switched Twist-Lock® and Hubbellock® Enclosures
Horsepower rated switch
Lockable handle provides
lockout protection for greater
safety and complies with
OSHA lockout requirements
Angled 20 or 30 amp Hubbell Twist-Lock®
receptacle provides low profile and helps
control cable arc of bend
Large receptacle gasketless
door and hinge assembly
Premolded conduit entry hole is
offset to prevent water condensation
from falling directly on interior
electrical components, while
speeding installation by making it
easier to pull conductors
SETL3
Heavy-duty internal frame bonds
conduit and all grounds and has a
DIN rail to accommodate the switch
The Switched Twist-Lock® and Hubbellock® Enclosures
integrate a receptacle and a switch to produce distinct
advantages for the user. This enclosure replaces box,
switch, cover and all in a compact design that meets
Type 3R Rainproof or 12K Dust-tight requirements.
The receptacle is angled downward for a low profile, and
it maintains a low profile while accommodating either a
20 or 30 Amp Twist-Lock receptacle or 30 Amp, 4 wire
Hubbellock receptacle. The enclosure can be used in top,
bottom or back feed applications. The handle is designed
to be locked in the off position for lockout protection.
Hubbell has developed the Switched Safety Enclosure
because users want to be able to disconnect higher voltage
B-36
®
Moveable feet may be used in
horizontal or vertical position or may
be removed and premarked holes
drilled for Type 1 or 3R installations
devices confidently. Hubbell responded with a line of
Switched Safety Enclosures for Twist-Lock and Hubbellock
receptacles.
The provision of the integral switch and the receptacle in
a compact, non-metallic enclosure encourages the safe
operating practice of disconnecting at the switch rather
than the plug and receptacle.
For plants and factories in a wide variety of industries,
as well as light industrial facilities, Hubbell’s Switched
Enclosures offer an upgrade that’s convenient, compact
and easy to install.
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Switched Safety Enclosures
Switched Twist-Lock® and Hubbellock® Enclosures
IP54
4.88"
(124.0)
SUITABILITY
UL Listed, CSA Certified
Type 3R and 12K Enclosure Rating
Switched Enclosure Ready for Twist-Lock® Receptacle Addition
Ideal unit for stockroom. This single unit provides the complete enclosure ready to accept any
Hubbell 20 or 30A Twist-Lock receptacle.
Description
Ratings
Catalog Number
Switched Twist-Lock enclosure
Amperage, voltage, and horsepower ratings will be
accommodates any NEMA 2 pole, determined by the choice of the NEMA 20 or 30A
3 wire to 4 pole, 5 wire grounding Twist-Lock receptacle selected.
receptacle (sold separately).
SETL3
Auxiliary contact.
“Break After Main Break”, 1 set of n/o contacts,
1 set of n/c contacts.
HBLAC1
Auxiliary contact.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC2
11.38"
(289.1)
4.5"
(114.3)
Switched Enclosure Complete with Twist-Lock® Receptacle
Completely pre-wired with a Twist-Lock receptacle, these application oriented combinations
are available to satisfy your needs.
Amps
Voltage
NEMA
Config.
Switched Twist-Lock
enclosure with a pre-wired
HBL2720 receptacle.
30
3Ø 240V AC
L15-30R
3
SE2720A
HBL2721
Switched Twist-Lock
enclosure with a pre-wired
HBL2730 receptacle.
30
3Ø 480V AC
L16-30R
10
SE2730A
HBL2731
Description
Switched
Horsepower Enclosure
SETL3
Use
Twist-Lock Plug
Switched Enclosure Ready for Hubbellock® Receptacle Addition
Ideal unit for stockroom. This single unit provides the complete enclosure ready to accept your
30A, 4 wire Hubbellock receptacle choice.
Description
Ratings
Catalog Number
Switched enclosure for use with
3 pole 4 wire 30A Hubbellock
receptacle (sold separately).
Amperage, voltage, and horsepower ratings will be
determined by the choice of the 4 wire Hubbellock
receptacle selected.
SEHBL3
Auxiliary contact.
“Break After Main Break”, 1 set of n/o contacts,
1 set of n/c contacts.
HBLAC1
Auxiliary contact.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC2
SE2720A
HBLAC1
Replacement Mounting Feet
HBLAC2
Description
Catalog Number
For 30A switches.
HBLRFT1∆
Note: ∆ Package of 10 feet and 10 screws.
For technical information see page B-72.
HBLRFT1
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-37
Twist-Lock® Devices
Mechanical Interlock Switched Safety Enclosures
Circuit-Lock® Unfused Safety-Shroud® Twist-Lock®
Lockable handle provides
lockout protection for greater
safety and complies with
OSHA lockout requirements
Angled 20 or 30 amp Hubbell Watertight
Safety-Shroud® Twist-Lock® receptacle
provides watertight, low profile and
mechanical interlock capabilities
(ordered separately)
Heavy-duty interlock
linkage prevents make
and break under load
Enclosure back is
designed for top,
bottom or back
feed options
Horsepower
rated switch
HBLMITL
Heavy-duty internal frame bonds
conduit and all grounds and has a
DIN rail to accommodate the switch
Moveable feet may be used in
horizontal or vertical position or may
be removed and premarked holes
drilled for Type 1 or 3R installations
Hubbell offers the only mechanical interlock for
Twist-Lock®. This new, unfused mechanical interlock
for watertight Safety-Shroud® Twist-Lock® integrates a
watertight receptacle with a linked disconnect switch to
provide a mechanically interlocked receptacle. This virtually
eliminates the possibility of making or breaking the circuit
while under load or making a casual or “lazy” connection.
The switch cannot be turned “ON” until the plug is properly
inserted and locked, and the plug cannot be removed until
the switch is turned “OFF.” All these protective features are
included in a compact Type 4X hose-directed water and
B-38
®
Premolded conduit entry hole is offset to
prevent water condensation from falling
directly on interior electrical components,
while speeding installation by making it
easier to pull conductors
corrosion resistant enclosure that allows for top, bottom or
back feed options.
The non-metallic enclosure is nonconductive, yet has an
internal frame to assure ground continuity with metallic
conduit.
In addition, this interlock works with all Safety-Shroud
Twist-Lock Plugs. The new unfused mechanical interlock
for watertight Safety-Shroud Twist-Lock can be locked
out as a method of compliance with OSHA lockout/tagout
regulations.
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Mechanical Interlock Switched Safety Enclosures
Circuit-Lock® Unfused Safety-Shroud® Twist-Lock®
3.19"
(81.0)
IP66
UL Listed, CSA Certified TYPE 4,
4X and TYPE 12K Enclosure Rating
4.88"
(124.0)
SUITABILITY
Mechanical Interlock Ready for Twist-Lock® Receptacle Addition
This unit is a complete enclosure ready to accept any 20 or 30A Watertight Safety-Shroud
Twist-Lock Receptacle.
Description
Ratings
Catalog Number
Mechanical Interlock
accommodates 20A or 30A
Watertight Safety-Shroud
Twist-Lock receptacles.
Amperage and voltage ratings will be determined
by the choice of the Watertight Safety-Shroud
Twist-Lock selected. Supplied with ¾" NPT Hub.
HBLMITL
11.44"
(290.6)
Accepts the following Watertight Safety-Shroud® Twist-Lock® Receptacles:
20A
Use Watertight
Safety-Shroud
Twist-Lock Plug
Rating
Voltage AC
2 Pole, 3 Wire
120
L5-20
1
HBL2310SW
HBL2311SW
208-240
L6-20
2.5
HBL2320SW
HBL2321SW
277
L7-20
3
HBL2330SW
HBL2331SW
120/240
L14-20
2.5
HBL2410SW
HBL2411SW
240 3Ø
L15-20
5 (3@208V)
HBL2420SW
HBL2421SW
480 3Ø
L16-20
10
HBL2430SW
HBL2431SW
120/208 3ØY
L21-20
3
HBL2510SW
HBL2511SW
120
L5-30
1
HBL2610SW
HBL2611SW
208-240
L6-30
3
HBL2620SW
HBL2621SW
120/240
L14-30
3
HBL2710SW
HBL2711SW
240 3Ø
L15-30
7.5
HBL2720SW
HBL2721SW
480 3Ø
L16-30
15
HBL2730SW
HBL2731SW
600 3Ø
L17-30
15
HBL2740SW
HBL2741SW
120/208 3ØY
L21-30
7.5
HBL2810SW
HBL2811SW
277/480
L22-30
7.5
HBL2820SW
HBL2821SW
347/600
L23-30
7.5
HBL2830SW
HBL2831SW
L5-30
L14-30
L15-30
1
3
7.5
HBL2615SWR
HBL2715SWR
HBL2725SWR
HBL2613SR
HBL2713SR
HBL2723SR
3 Pole, 4 Wire
4 Pole, 5 Wire
Max. HP
Rating*
Receptacle
Catalog Number
NEMA
Config.
4.19"
(106.4)
HBLMITL
30A
2 Pole, 3 Wire
3 Pole, 4 Wire
4 Pole, 5 Wire
HBL2620SW
HBL2713SR
30A Reverse Service
2 Pole, 3 Wire
3 Pole, 4 Wire
3 Pole, 4 Wire
120
120/240
240 3Ø
HBLAC1
Auxiliary Contacts
Description
Ratings
Catalog Number
Auxiliary contact.
“Break After Main Break”, 1 set of n/o contacts,
1 set of n/c contacts.
HBLAC1
Auxiliary contact.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC2
HBLAC2
Replacement Parts
Description
Catalog Number
Ground block.
HBL30RGB
Neutral block.
HBL30RNB
Replacement switch.
HBLDS3RS
HBL30RGB
HBL30RNB
Replacement Mounting Feet
Description
Catalog Number
For 30A switches.
HBLRFT1∆
Note: *HP ratings for the final unit are determined by the HP rating of the switch, limited by the full load current capability
of the receptacle at 80% of rated current, number of phases and line voltage. HP ratings listed above are AC only.
∆ Package of 10 feet and 10 screws.
See pages B-52 and B-53 for accessories.
See page B-73 for technical information.
www.hubbell-wiring.com
®
Wiring Device-Kellems
HBLRFT1
Dimensions in Inches (mm)
B-39
Twist-Lock® Devices
Safety-Shroud® Twist-Lock® Devices
ADD-A-SHROUD®
Safety-Shroud® Twist-Lock® – 20 and 30 Ampere
The Add-A-Shroud® devices allow conversion of existing 20A and 30A 3 to 5 wire Hubbell
Insulgrip® Twist-Lock devices to a Safety-Shroud Twist-Lock plug. These devices provide a
convenient and cost-effective way to convert existing Hubbell Insulgrip Twist-Lock plugs to SafetyShroud Twist-Lock plugs. The Safety-Shroud Twist-Lock plug permits engagement with the
Hubbell Mechanical Interlock Enclosure which virtually prevents make and break under load.
Add-A-Shroud® Catalog Number HBLSS3
For conversion of all 3 wire Hubbell Insulgrip Twist-Lock Devices.
Rating
Voltage AC
NEMA Config.
Plug
Reference Number Catalog Number
20A, 2 Pole 3 Wire Grounding
125V
L5-20
HBL2311
HBLSS3
250V
L6-20
HBL2321
HBLSS3
277V AC
L7-20
HBL2331
HBLSS3
480V AC
L8-20
HBL2341
HBLSS3
600V AC
L9-20
HBL2351
HBLSS3
125V
L5-30
HBL2611
HBLSS3
250V
L6-30
HBL2621
HBLSS3
277V AC
L7-30
HBL2631
HBLSS3
480V AC
L8-30
HBL2641
HBLSS3
600V AC
L9-30
HBL2651
HBLSS3
30A, 2 Pole 3 Wire Grounding
HBLSS3
Add-A-Shroud
Catalog Number
Add-A-Shroud® Catalog Number HBLSS45
For conversion of all 4 and 5 wire Hubbell Insulgrip Twist-Lock Devices.
Rating
Voltage AC
NEMA Config.
Plug
Reference Number Catalog Number
20A, 3 Pole 4 Wire Grounding
125/250V AC
L14-20
HBL2411
HBLSS45
3Ø250V AC
L15-20
HBL2421
HBLSS45
30A, 3 Pole 4 Wire Grounding
HBLSS45
20A, 4 Pole 5 Wire Grounding
30A, 4 Pole 5 Wire Grounding
B-40
®
Add-A-Shroud
Catalog Number
3Ø480V AC
L16-20
HBL2431
HBLSS45
125/250V AC
L14-30
HBL2711
HBLSS45
3Ø250V AC
L15-30
HBL2721
HBLSS45
3Ø480V AC
L16-30
HBL2731
HBLSS45
3Ø600V AC
L17-30
HBL2741
HBLSS45
3ØY 120/208V AC
L21-20
HBL2511
HBLSS45
3ØY 277/480V AC
L22-20
HBL2521
HBLSS45
3ØY 347/600V AC
L23-20
HBL2531
HBLSS45
3ØY 120/208V AC
L21-30
HBL2811
HBLSS45
3ØY 277/480V AC
L22-30
HBL2821
HBLSS45
3ØY 347/600V AC
L23-30
HBL2831
HBLSS45
Wiring Device-Kellems
www.hubbell-wiring.com
Non-NEMA Twist-Lock® Devices
10 Ampere, 250 Volts, 15 Ampere 125 Volts
3 Pole, 3 Wire and 2 Pole, 3 Wire
2P 3W
3P 3W
For Replacement Use Only
IP20
CU
SUITABILITY
CU
Not Grounded
Not UL listed
Plugs
2.75"(69.9)
Grounded
Not UL listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
Multiple drive screws.
230"-.720"
(5.8-18.3)
HBL7567C
–
Yellow and white nylon.
Multiple drive screws.
230"-.720"
(5.8-18.3)
HBL7567CY
–
2.26"
(57.4)
HBL7567C
Note: See page B-49 for accessories.
1.75"
(44.4)
1.13"
(28.7)
Flanged Inlets
Description
Catalog Number
Stainless steel casing.
HBL7556
2.31"
(58.7)
1.94"
(49.3)
HBL7556G
1.50"
(38.1)
.16"(4.1) DIA.
HBL7556
3P 3W
For Replacement Use Only
2P 3W
2.78" (70.6)
IP20
CU
SUITABILITY
CU
1.53"
(38.9)
GR
Connector Bodies
Not Grounded
Not UL listed
Grounded
Not UL listed
Description
Cord Dia.
Catalog Number
Insulgrip connector, black and
white nylon. Multiple drive screws.
230"-.720"
(5.8-18.3)
HBL7565C
–
Insulgrip connector, yellow and
white nylon. Multiple drive screws.
230"-.720"
(5.8-18.3)
HBL7565CY
–
Black phenolic.
.296"-.625"
(7.5-15.9)
HBL7555
1.41"
(35.8)
HBL7565C
1.70"
(43.2)
HBL7555G
Note: See page B-49 for accessories.
Receptacles
2.74"
(69.5)
3.28"
(83.3)
Description
Catalog Number
Duplex, black RTP*, back and side wired.
HBL7580
HBL7580G
Single, black phenolic, back and side wired.
HBL7582
HBL7582G
Note: See page B-48 for accessories.
HBL7580
Flanged Receptacles
Description
Catalog Number
Stainless steel casing.
HBL7557
1.75"
(44.4)
1.34"
(34.0)
HBL7557G
Note: See page B-49 for accessories.
*RTP is an abbreviation for reinforced thermoplastic.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
2.31"
(58.7)
1.94"
(49.3)
1.50"
(38.1)
.16"(4.1) DIA.
HBL7557
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Dimensions in Inches (mm)
B-41
Non-NEMA Twist-Lock® Devices
20 Ampere, 250, 125/250 Volts and 3ØY 120/208 Volts AC
Insulgrip® Plugs, Flanged Inlets, Connector Bodies and Receptacles
3P 3W
2P 3W
Y
For Replacement Use Only
2.75"(69.9)
2.26"
(57.4)
1.97"
(50.0)
HBL9965C
IP20
GR
W
CU
SUITABILITY
X
20A 250V
Non-NEMA
Not UL Listed
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL9965GCB
Corrosion resistant, yellow nylon.
.360"-.930"
(9-24)
–
20A 125/250V
Non-NEMA
Not UL Listed
HBL9965C
HBL99CM65C
Note: See page B-51 for accessories.
1.25" R.
(31.8)
.19" (4.8) DIA.
2.09"
(53.1)
120°
2.04"
(51.8)
2.88"
(73.2)
Flanged Inlets
Description
Catalog Number
–
Nylon casing, back wired.
HBL3325C
Note: See page B-50 for accessories.
120°
HBL3325C
3P 4W
For Replacement Use Only
IP20
W
X
SUITABILITY
Z
Z
X
Y
2.75"(69.9)
Y
2.33"
(59.2)
2.21"
(56.1)
4P 4W
GR
20A 3Ø 250V AC
Non-NEMA
Not UL Listed
Plugs
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL7411GCB
HBL7411C
20A 3Ø Y
120/208V AC
Non-NEMA
Not UL Listed
HBL7411C
Note: See page B-53 for accessories.
1.34" R.
(34.0)
.19" (4.8) DIA.
2.27"
(57.7)
Flanged Inlets
Description
Catalog Number
–
Nylon casing, back wired.
120°
2.23"
(56.6)
3.06"
(77.7)
HBL7408C
Note: See page B-52 for accessories.
See page B-69 for technical information.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
120°
HBL7408C
Dimensions in Inches (mm)
B-42
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Non-NEMA Twist-Lock® Devices
20 Ampere, 250, 125/250 Volts and 3ØY 120/208 Volts AC
Insulgrip® Plugs, Flanged Inlets, Connector Bodies and Receptacles
3P 3W
2P 3W
Y
For Replacement Use Only
IP20
X
20A 250V
Non-NEMA
Not UL Listed
Connector Bodies
3.86"(98.0)
W
GR
CU
SUITABILITY
20A 125/250V
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL7314GCB
Corrosion resistant, yellow nylon.
.360"-.930"
(9-24)
–
2.26"
(57.4)
1.97"
(50.0)
HBL7314C
HBL7314C
HBL73CM14C
1.39"
(35.2)
1.11" (28.2)
Note: See page B-51 for accessories.
Single Flush Receptacles
2.20"
(57.2)
Description
Catalog Number
Black nylon face, back wired.
HBL7310BG
1.38"
(34.9)
2.38"
(60.5)
3.61"
(91.6)
HBL7310B
Note: See page B-50 for accessories.
#6-32
TAP
1.28" (32.5)
HBL7310B
Flanged Receptacles
Description
Catalog Number
–
Nylon casing, back wired.
1.25" R.
(31.8)
HBL3326C
.19" (4.8) DIA.
2.09"
(53.1)
Note: See page B-50 for accessories.
120°
2.04"
(51.8)
2.88"
(73.2)
3P 4W
For Replacement Use Only
IP20
SUITABILITY
4P 4W
GR
Z
W
X
Z
120°
X
HBL3326C
Y
Y
20A 3Ø 250V AC
Non-NEMA
Not UL Listed
Connector Bodies
20A 3Ø Y
120/208V AC
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL7413GCB
HBL7413C
3.86"(98.0)
2.33"
(59.2)
2.21"
(56.1)
Note: See page B-53 for accessories.
HBL7413GCB
Single Flush Receptacles
Description
Catalog Number
Black thermoset, back wired.
HBL7410BG
HBL7417B
Note: See page B-52 for accessories.
2.50"
(63.5)
Flanged Receptacles
Description
–
1.57"
(39.8)
#6-32
TAP
Catalog Number
Nylon casing, back wired.
1.05" (26.7)
HBL7410B
–
Mounted on a 4" (101.6) round metal cover.
1.71"
(43.4)
HBL7409C
2.38"
(60.5)
3.61"
(91.6)
1.28" (32.5)
HBL7410BG
Note: See page B-52 for accessories.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
1.34" R.
(34.0)
.19" (4.8) DIA.
2.27"
(57.7)
120°
2.23"
(56.6)
3.06"
(77.7)
120°
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
www.hubbell-wiring.com
®
Wiring Device-Kellems
HBL7409C
Dimensions in Inches (mm)
B-43
Non-NEMA Twist-Lock® Devices
30 Ampere, 250, 125/250 Volts and 3ØY 120/208 Volts AC
3P 3W
2P 3W
For Replacement Use Only
2.75"(69.9)
2.26"
(57.4)
1.97"
(50.0)
HBL3331GC
1.25" R.
(31.8)
IP20
W
GR
SUITABILITY
Insulgrip® Plugs
CU
X
30A 250V
Non-NEMA
Not UL listed
30A 125/250V
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL3331GC
2.09"
(53.1)
Insulgrip® Flanged Inlets
Description
Catalog Number
–
Nylon casing, back wired.
2.09"
(53.1)
2.88"
(73.2)
HBL3331C
Note: See page B-51 for accessories.
.19" (4.8) DIA.
120°
Y
HBL3334C
Note: See page B-50 for accessories.
120°
HBL3334C
3P 4W
For Replacement Use Only
2.75"(69.9)
2.33"
(59.2)
2.21"
(56.1)
Insulgrip®
IP20
GR
Z
Y
SUITABILITY
Plugs
4P 4W
Z
X
X
30A 3Ø 250V AC
Non-NEMA
Not UL Listed
Non-NEMA
30A 3Ø Y
120/208V AC
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL3431GCB
HBL3431C
Y
W
HBL3431C
Note: See page B-53 for accessories.
See page B-69 for technical information.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
Dimensions in Inches (mm)
B-44
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Non-NEMA Twist-Lock® Devices
30 Ampere, 250, 125/250 Volts and 3ØY 120/208 Volts AC
2P 3W
For Replacement Use Only
GR
IP20
SUITABILITY
Insulgrip® Connector Bodies
3P 3W
W
Y
3.86"(98.0)
CU
X
30A 250V
Non-NEMA
Not UL listed
30A 125/250V
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Black and white nylon.
.360"-.930"
(9-24)
HBL3333GC
2.26"
(57.4)
1.97"
(50.0)
HBL3333C
HBL3333GC
Note: See page B-51 for accessories.
1.71"
(43.4)
Single Flush Receptacles
Description
Catalog Number
Black thermoset, back wired.
HBL3330G
HBL3330
2.38"
(60.5)
1.57"
3.61"
(39.8)
(91.6)
2.50"
(63.5)
Note: See page B-50 for accessories.
#6-32
TAP
Insulgrip® Flanged Receptacles
Description
–
HBL3335C
Note: See page B-50 for accessories.
For Replacement Use Only
1.36" (34.5)
HBL3330G
Catalog Number
Nylon casing, back wired.
1.25" R.
(31.8)
IP20
Insulgrip® Connector Bodies
3P 4W
4P 4W
Z
Z
GR
Y
SUITABILITY
1.13" (28.7)
Y
120°
30A 3Ø 250V AC
Non-NEMA
Not UL Listed
30A 3Ø Y
120/208V AC
Non-NEMA
Not UL Listed
Cord Dia.
Catalog Number
.350"-1.150"
(9-29)
HBL3433GCB
2.04"
(51.8)
W
X
Black and white nylon.
2.09"
(53.1)
2.88"
(73.2)
X
Description
.19" (4.8) DIA.
120°
HBL3335C
HBL3433C
3.86"(98.0)
2.33"
(59.2)
Note: See page B-53 for accessories.
2.21"
(56.1)
Single Flush Receptacles
Description
Catalog Number
Black thermoset, back wired.
HBL3430G
HBL3433C
HBL3430
Note: See page B-52 for accessories.
1.71"
(43.4)
1.13" (28.7)
Insulgrip® Flanged Receptacles
Description
Catalog Number
Nylon casing, back wired.
HBL3435CM2
–
Note: See page B-50 for accessories.
The devices shown on this page are not listed by Underwriters Laboratories Inc.
and are for replacement use only in existing installations.
2.50"
(63.5)
1.57"
(39.8)
#6-32
TAP
2.38"
(60.5)
3.61"
(91.6)
1.36" (34.5)
HBL3430
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Dimensions in Inches (mm)
B-45
Non-NEMA Twist-Lock® Devices
20 Ampere, 250 Volts, 10 Ampere, 600 Volts AC
4 Pole, 5 Wire Grounding
Z
For Replacement Use Only
2.75"(69.9)
2.33"
(59.2)
2.21"
(56.1)
HBL3521C
1.34" R.
(34.0)
IP20
SUITABILITY
Plugs
W
GR
Y
X
20A 250V
10A 600V AC
Non-NEMA
UL/CSA
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL3521C
Note: See page B-53 for accessories.
.19" (4.8) DIA.
2.27"
(57.7)
120°
2.23"
(56.6)
3.06"
(77.7)
Flanged Inlets
Description
Catalog Number
Insulgrip nylon casing, back wired.
HBL3524C
Note: See page B-52 for accessories.
120°
HBL3524C
Z
W
Y
IP20
3.86"(98.0)
SUITABILITY
2.33"
(59.2)
2.21"
(56.1)
Connector Bodies
X
GR
20A 250V
10A 600V AC
Non-NEMA
UL/CSA
Description
Cord Dia.
Catalog Number
Black and white nylon.
.350"-1.150"
(9-29)
HBL3523C
Note: See page B-53 for accessories.
HBL3523C
Single Flush Receptacles
1.71"
(43.4)
Description
Catalog Number
Black thermoset, back wired.
HBL3520
Note: See page B-52 for accessories.
2.50"
(63.5)
#6-32
TAP
1.57"
(39.8)
2.38"
(60.5)
3.28"
(83.3)
HBL3520
1.34" R.
(34.0)
Flanged Receptacles
Description
Catalog Number
Insulgrip nylon casing, back wired.
HBL3525C
Note: See page B-52 for accessories.
See page B-69 for technical information.
.19" (4.8) DIA.
2.27"
(57.7)
120°
2.23"
(56.6)
3.06"
(77.7)
120°
HBL3525C
Dimensions in Inches (mm)
B-46
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Non-NEMA Twist-Lock® Devices
30 Ampere, 250 Volts DC Max. and 600 Volts AC Max. 50 - 400Hz
20 Ampere, 3ØY 120/208 Volts AC 400Hz
Variload® Twist-Lock® Devices
In many large plants and laboratories the number of circuits of different ratings and
frequency is greater than the number of blade configurations available in conventional
wiring devices.
Prior to NEMA configuration standardization the solution was “Variload® Twist-Lock®”
devices with four non-interchangeable center pin and slot configurations that can be
assigned within the same premises to circuits of same voltage, frequency and supply
(AC or DC), in accordance with NEC® 406.4(F) and 406.8 and with CE Code, Part I,
Rule 26-700(3).
30A, 250V DC Max. and 600V AC Max. 50 - 400Hz
Center Pin
Configuration
Plugs
Flanged Inlets
.91"
(23.1)
2.13"
(54.1)
DIA.
HBL45315
2.89"
(73.4)
.91"
(23.1)
2.13"
(54.1)
DIA.
1.84"
(46.7)
DIA.
Connector Bodies
Receptacles
HBL45115
–
HBL45135
HBL45105
HBL45215
–
HBL45235
HBL45205
HBL45315
–
HBL45335
HBL45305
HBL45335
1.72"
(43.7)
2.69"
(68.3)
20A 3ØY, 120/208V AC Only, 400Hz
Center Pin
Configuration
1.86"
(47.2)
Plugs
Flanged Inlets
Connector Bodies
Receptacles
HBL45915†
HBL45985CL†
HBL45935†
HBL45905†
#6-32
TAP
Note: †UL Listed only.
1.72"
(43.7)
1.27"
(32.3)
2.38"
(60.5)
3.28"
(83.3)
1.02"(25.9)
HBL45305
Receptacle Wallplates
Description
Single Receptacle with
Face Dia. 1.74" (44.2)
Catalog Number
Stainless steel 302/304, .035 in. (0.9), horizontal brushed finish.
SS725
IP55*
SS725
SUITABILITY
Weatherproof Boots
Description
Seal-Tite®
Catalog Number
black elastomer for
Variload®
HBL6027**
plugs.
Seal-Tite® black elastomer for Variload® connector bodies.
HBL6028**
Note: *When installed and used properly with plug and connector body combinations.
** Weatherproof boots not UL Listed, nor CSA Certified.
HBL6027
HBL6028
CAUTION: To avoid electrical shock, review premises carefully and do not use if slot or blade
configuration (design) is already in a circuit having a rating differing from the rating of this device.
www.hubbell-wiring.com
®
Wiring Device-Kellems
Dimensions in Inches (mm)
B-47
Twist-Lock® Devices
Accessories
for 15 Ampere 2 and 3 Wire Duplex, Single Receptacles and Flanged Devices
Wallplates, 1-Gang
SS8
SS7
Description
Color
Duplex
Receptacles
Catalog Number
Single Receptacles with
Face Dia. 1.40" (35.6)
Catalog Number
Nylon, smooth.
Brown
Ivory
NP8
NP8I
NP7
NP7I
Stainless steel 302/304, .035 in. (0.9),
horizontal brushed finish.
SS8
SS7
Stainless steel 430, .035 in. (0.9),
horizontal brushed finish.
SS8L
SS7L
Brass .04 in. (1.0),
horizontal brushed finish.
SB8
SB7
Aluminum .05 in. (1.3),
horizontal brushed finish.
SA8
SA7
Description
Catalog Number
Catalog Number
Cast aluminum, for standard horizontal box mount.
HBL5205WO
Same as above except FS/FD box mount.
HBL5206WO
IP44
SUITABILITY
HBL5206WO
Weatherproof Covers
–
Cast aluminum vertical FS/FD box mount.
HBL5221
–
–
HBL7420
Gray thermoplastic, vertical standard box mount,
corrosion resistant.
HBL5222*
–
Same as above except yellow.
HBL52CM22*
Gray thermoplastic, vertical FS/FD box mount,
corrosion resistant.
HBL5221*
HBL7423WO
Yellow thermoplastic, vertical FS/FD box mount,
corrosion resistant.
HBL52CM21*
HBL74CM23WO
White thermoplastic, vertical FS/FD box mount,
corrosion resistant.
HBL52CM21W*
–
–
Note: *IP20 Suitability only.
IP44
SUITABILITY
Weatherproof Covers for
15A Nylon Flanged Receptacles and Inlets
HBL7423WO
Description
Catalog Number
Gray thermoplastic, corrosion resistant.
WP1
Note: All weatherproof covers listed above are UL Listed for wet and damp locations with cover closed.
Those with suffix WO are UL Listed with cover open.
See page N-23 for additional information on covers.
WP1
B-48
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Accessories
for 15 Ampere 2 and 3 Wire Plugs, Connector Bodies and Flanged Devices
Tinted lid is aesthetically pleasing in any location.
High-impact, polycarbonate while-in-use cover will
not rust or corrode; cover is NEMA 3R rated
Compact 2-gang design
Pool Kit Contains:
• Heavy duty, industrial grade locking
receptacle NEMA L5-20, 20A 125V
• Single-pole switch
(20A, 120-277V AC)
• Two gang, 2 inch deep die-cast aluminum
weatherproof box with (4) ¾ inch
threaded outlets
• Two gang, weatherproof while-in-use cover
• Includes mounting hardware, gasket,
wire connector and (3) closure plugs
• Complete assembly instructions
HBLPKL520
Locking receptacle prevents
unintentional disconnection
of mating pump plug
HBL6023
Pool Pump Kit
Description
Catalog Number
Pool pump receptacle kit.
HBLPKL520
Weatherproof, Seal-Tite®, Triple Seal Boots
for 15A Insulgrip® Devices
IP55*
SUITABILITY
HBL6024
Description
Catalog Number
Black elastomer boot for plugs when used in a cord set and connector bodies
when used with a flange inlet.
HBL6023
Same as above except yellow elastomer.
HBL60CM23
Black elastomer boot for connector bodies when used in cord sets.
HBL6024
Same as above except yellow elastomer.
HBL60CM24
Note: *When installed and used properly with plug and connector body combinations.
HBL7529A
Closure Cover
Description
Catalog Number
For use with 3 wire 15A Twist-Lock flush or flanged receptacles.
HBL7529A
3.14"
(79.8)
4.22"
(107.2)
PLUGOUT® Lockout Devices
Description
Catalog Number
Lockout device for 15A and 20A straight blade plugs.
HLDMP
Lockout device for attachable 20 and 30A plugs, straight body or angle types,
with or without weatherproof covers.
HLD
HLDMP
Note: See section Z for additional information on PLUGOUT Lockout devices.
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-49
Twist-Lock® Devices
Accessories
for 20 and 30 Ampere 3 Wire Receptacles and Flanged Devices
Wallplates, 1-Gang
Description
Color
Single Receptacles with
Face Dia. 1.60" (40.6)
Catalog Number
Nylon, smooth.
Black
NP720BK
Stainless steel 302/304, .035 in. (0.9),
horizontal brushed finish.
SS720
Brass .04 in. (1.0), horizontal brushed finish.
SB720
SS720
IP44
SUITABILITY
Weatherproof Covers
Description
Catalog Number
Cast aluminum, for FS/FD box mounting.
HBL7420
Gray thermoplastic, for FS/FD box mounting,
corrosion resistant.
HBL7425WOA
Same as above except yellow.
HBL74CM25WOA
HBL7425WOA
Weatherproof Covers for
Flanged Inlets and Flanged Receptacles
IP44
SUITABILITY
Description
Catalog Number
Gray thermoplastic, corrosion resistant.
WP2
Note: Weatherproof covers are UL Listed for wet and damp location with cover closed.
Those with suffix WOA are UL Listed with cover open.
See page N-23 for additional information on covers.
WP2
Closure Cover for 3 Wire Flanged Inlets
Description
Catalog Number
Rubber closure plug.
HBL2899
Note: Closure cover not UL Listed, CSA Certified.
HBL2899
B-50
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Accessories
for 20 and 30 Ampere, 3 Wire Plugs and Connector Bodies
IP55*
Insulgrip®
SUITABILITY
Weatherproof, Seal-Tite®, Triple Seal Boots
Description
Catalog Number
Black elastomer boot for plugs when used in a cord set and
connector bodies when used in flanged inlets.
HBL6031
Same as above except yellow.
HBL60CM31
Black elastomer boot for connector bodies when used in a cord set.
HBL6032
Same as above except yellow.
HBL60CM32
HBL6031
Angle Adapter
Description
Catalog Number
Nylon, angle adapter for Insulgrip plugs and connector bodies,
cord grip range .325"-.930" (8.3-24).
HBL3WAA
HBL6032
PLUGOUT® Lockout Devices
Description
Catalog Number
Lockout device for attachable 20 and 30A locking plugs, straight body
or angle types, with or without weatherproof covers.
HLD
Lockout device for 20 and 30A 3 wire angle plugs and watertight
Safety-Shroud® Twist-Lock® plugs.
HLD2
Note: See section Z for additional information on PLUGOUT Lockout devices.
*When installed and used properly with plug and connector body combinations.
HBL3WAA
Insulgrip® Plug and Connector Body Latching Kit
The Hubbell latching kit provides both improved safety and security through a double
locking feature that makes unintentional disconnection virtually impossible – even under
high vibration situations. The plug and connector body lock once when first connected,
then again when you push the special position locking slide into place.
Insulgrip® Latching Kit
Description
Catalog Number
For all 3 wire 20A and 30A Twist-Lock Insulgrip plugs and connectors.
SK2
Valise®
SK2
IP55*
SUITABILITY
Weatherproof, Seal-Tite®, Triple Seal Boots
Description
Catalog Number
Yellow Seal-Tite® elastomer triple seal cover for use with Valise plugs when used
in cord set and Valise connector bodies when used with flanged inlet.
HBL60CM31V
Yellow Seal-Tite® elastomer triple seal cover for use with Valise connector bodies.
HBL60CM32V
HBL60CM31V
Note: *When installed and used properly with plug and connector body combinations.
HBL60CM32V
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-51
Twist-Lock® Devices
Accessories
for 20 and 30 Ampere, 4 and 5 Wire Receptacles and Flanged Devices
Wallplates, 1-Gang
Description
Color
Single Receptacles with
Face Dia. 1.60" (40.6)
Catalog Number
Nylon, smooth.
Black
NP720BK
Stainless steel 302/304, .035 in. (0.9),
horizontal brushed finish, 1-gang.
SS720
Brass .04 in. (1.0), horizontal brushed finish.
SB720
NP720BK
IP44
SUITABILITY
Weatherproof Covers
Description
Catalog Number
Cast aluminum, for FS/FD box mounting.
HBL7420
Gray thermoplastic, for FS/FD box mounting, corrosion resistant.
HBL7425WOA
Same as above except yellow.
HBL74CM25WOA
SS720
Weatherproof Covers for
Flanged Inlets and Flanged Receptacles
IP44
SUITABILITY
Description
Catalog Number
Gray thermoplastic, corrosion resistant.
WP2
Note: Weatherproof covers are UL Listed for wet and damp location with cover closed.
Those with suffix WOA are UL Listed with cover open.
See page N-23 for additional information on covers.
HBL7425WOA
WP2
B-52
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Accessories
for 20 and 30 Ampere, 4 and 5 Wire Plugs and Connector Bodies
IP55*
Insulgrip®
SUITABILITY
Weatherproof, Seal-Tite®, Triple Seal Boots
Description
Catalog Number
Seal-Tite® triple seal cover for plug when used on a cord set or when used
with flush receptacles or connector bodies when used with flanged inlets.
Black elastomer.
HBL6035
Same as above except yellow.
HBL60CM35
Seal-Tite triple seal cover for connector bodies, when used on interconnecting
cord sets. Black elastomer.
HBL6036
Same as above except yellow.
HBL60CM36
HBL6035
Angle Adapter
Description
Catalog Number
Nylon, angle adapter for Insulgrip plugs and connectors, cord grip range
.350"-1.15" (8.9-29.2).
HBL45WAA
HBL6036
PLUGOUT® Lockout Device
Description
Catalog Number
Lockout device for attachable 20 and 30A plugs, straight body or
angle types, with or without weatherproof covers.
HLD
Lockout device for 20 and 30A, 4 and 5 wire angle plugs and watertight
Safety-Shroud® Twist-Lock® plugs.
HLD2
Note: See section Z for additional information on PLUGOUT Lockout devices.
*When installed and used properly, with plug and connector body combinations.
HBL45WAA
4.27"
(108.5)
Insulgrip® Plug and Connector Body Latching Kit
7.27"
(184.7)
When you want to make doubly sure that plugs and connector bodies stay connected, the Hubbell
latching kit provides both improved safety and security through a double locking feature that
makes unintentional disconnection virtually impossible – even under high vibration situations.
The plug and connector body lock once when first connected, then again when you push the
special position locking slide into place.
HLD
Insulgrip® Latching Kit
Description
Catalog Number
For all 20 and 30A, 4 and 5 wire Twist-Lock Insulgrip plugs and connectors.
SK3
6.31"
(160.3)
12.5"
(317.5)
SK3
HLD2
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-53
Twist-Lock® Devices
Safety-Shroud® Twist-Lock® Accessories
E
F
C
A
15° Angle Non-Metallic Back Box
NPT
Hub
Size
15°
B
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets.
D
Non-Metallic Angle Box
E
F
NPT
Hub
Size
D
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets.
Metallic Angle Box
E
C
A
48 CU. IN.
F
5.67" 4.44" 4.05" 3.91"
(144.0) (112.8) (102.9) (99.3)
E
Inch
(mm)
F
Inch
(mm)
2.35" 4.92"
(59.7) (125.0)
Cubic Inch
Capacity Catalog Number
30.00"
BB2030N
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic Inch
Capacity Catalog Number
5.13" 4.00" 4.19" 3.75" 3.00" 4.00"
(130.2) (101.6) (106.4) (95.3) (76.2) (101.6)
30.00"
BB201W
1"
5.13" 4.00" 4.19" 3.75" 3.00" 4.00"
(130.2) (101.6) (106.4) (95.3) (76.2) (101.6)
30.00"
BB301W
Metallic Feed Thru Back Boxes
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets.
D
Metallic Feed Thru Box
D
E
C
D
Inch
(mm)
¾"
NPT
Hub
Size
B
C
Inch
(mm)
15° Angle Metallic Back Boxes
15°
B
B
Inch
(mm)
Note: Hub is not included; order Raco part number 1704. This box meets IP67 requirement and Type 4X requirements when
installed with a watertight conduit hub.
C
A
1"
A
Inch
(mm)
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic Inch
Capacity Catalog Number
¾"
8.25" 3.06" 7.14" 4.50" 3.75" 3.13"
(209.6) (77.8) (181.4) (114.3) (95.3) (79.5)
48.00"
FT202W
1"
8.25" 3.06" 7.14" 4.50" 3.75" 3.13"
(209.6) (77.8) (181.4) (114.3) (95.3) (79.5)
48.00"
FT302W
Note: These boxes are cast aluminum and are finished with enamel paint. These boxes withstand a 500-hour salt spray test as
well as UL raintight and external icing tests. NPT (metric designator).
A
B
55°
55° Angle Metallic Adapter and Back Box
NPT
Hub
Size
AB203055
D
E
B
C
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets
1"
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
6.80" 5.63" 6.60" 4.50" 3.74"
(172.4) (142.9) (167.0) (114.3) (95.0)
-
Cubic Inch
Capacity Catalog Number
45.27"
AB203055
A
55° Angle Metallic Adapter with Grounding Lug
55°
A
Inch
(mm)
AA203055
Description
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets
HBL2030AP
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
4.89" 3.33" 4.29" 3.75" 2.50"
(172.4) (167.0) (142.9) (114.3) (95.0)
-
Cubic Inch
Capacity Catalog Number
25.00"
AA203055
Straight Watertight Wall Box Adapter
Description
Catalog Number
Adapts 20A and 30A Watertight Safety-Shroud Twist-Lock receptacles and
inlets to 2-gang, device mount, FD boxes.
HBL2030AP
Non-Watertight Angle Wall Box Adapter
AA2030PS
Dimensions in Inches (mm)
B-54
Description
Catalog Number
Adapts 20A and 30A Watertight Safety-Shroud Twist-Lock receptacles to
1- or 2-gang standard wall boxes (4" or 4¹¹⁄₁₆" square).
AA2030PS
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
50 Ampere Plugs and Connector Bodies
Features and Benefits
The Difference Is Insulgrip®...and a Whole Lot More
Super tough nylon housing
offers better impact qualities
Stainless steel shroud restricts
mismating with the wrong device
Thermoplastic polyester interior
provides heat resistance and
impact strength
Housing assembly latch slotted to
fit standard flat-blade screwdriver
providing secure assembly and
fast disassembly for wiring
Padlock capable shroud allows
compliance to OSHA lockout tagout
regulation 29 CFR 1910 .147
CS6361C
6/6 nylon nose – thermoplastic
polyester terminal cover provides
heat resistance in terminal area and
impact strength of nose piece
CS6360C
Three-piece thermoplastic clamp
assembly with stainless steel
fast lead screws provides a
more consistent, durable grip.
Sealed cable entry keeps out
moisture and dust
Box terminal with hex socket threaded
slug is superior because it permits high
clamping pressure on conductors
without damaging strands
Hubbell’s 50 amp Twist-Lock® devices features heavy-duty
design built for heavy-duty applications. These Hubbell
50 amp Twist-Lock plugs and connector bodies are built
to go where you need power, even in some of the
harshest environments.
On the outside, 50 amp plugs and connectors are made
of Super tough nylon for better impact resistance. On the
plug, the stainless steel shroud not only provides protection
and durability, but safety as well. That’s because the rigid
construction restricts distortion, thus minimizing the
possibility of mating incorrect devices.
www.hubbell-wiring.com
One-piece grounding contact on
4-wire devices provides a more
reliable grounding system for a
safer device
On the inside are the kinds of features that separate Hubbell
from all the rest. The cord grip has been designed with
offset gripping jaws to securely hold the conductors – not
just the cord jacket. Hubbell’s box terminals speed wiring
and provide a superior termination. The plug’s thermoplastic
polyester interior provides excellent heat resistance without
compromising strength.
In all, it’s the combination of function and performance that
Hubbell demands of all its products. And it’s why we’ll never
add a feature that compromises performance.
®
Wiring Device-Kellems
B-55
Twist-Lock® Devices
50 Ampere, 125, 250 Volts and 480 Volts AC
2 Pole, 3 Wire Grounding
Y
6.38"
(162.0)
IP20
CS8265C
X
G
50A 125V
UL/CSA
Plugs
X
G
SUITABILITY
2.59"
(65.8)
Y
W
Description
Cord Dia.
Catalog Number
Nylon housing, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
CS6361C
G
50A 250V
UL/CSA
50A 480V AC
UL/CSA
CS8265C
CS8465C
CS8275
CS8475†
Note: See page B-60 for accessories.
3.50"
(88.9)
90°
Flanged Inlets
.19"
(4.8)
DIA.
1.50"R
(38.0)
Description
Catalog Number
Zinc plated steel casing,
thermoset interior.
CS6377†
2.62"
(66.5)
2.17"
(55.1)
CS8275
IP20
SUITABILITY
6.34"
(161.0)
Connector Bodies
2.59"
(65.8)
CS8264C
X
G
50A 125V
UL/CSA
Description
Cord Dia.
Catalog Number
Nylon housing, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
CS6360C
Y
X
G
50A 250V
UL/CSA
G
50A 480V AC
UL/CSA
CS8264C
CS8464C
CS8269
CS8469†
Note: See page B-60 for accessories.
2.13"
(54.1)
Receptacles
2.69" 3.28"
(68.3) (83.3)
1.03"
(26.2)
Y
W
Description
Catalog Number
Black phenolic.
CS6370
Note: See page B-60 for accessories.
See page B-71 for technical Information.
†Not CSA Certified.
2.44"
(62)
CS8269
Dimensions in Inches (mm)
B-56
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
50 Ampere, 125/250, 3Ø 250 Volts and 3Ø 480 Volts AC
3 Pole, 4 Wire Grounding
Y
IP20
SUITABILITY
Plugs
X
X
W
G
Z
G
50A
125/250V AC
UL/CSA
Description
Cord Dia.
Catalog Number
Nylon cover, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
CS6365C
6.38"
(162.0)
Y
Y
X
Z
G
50A
3Ø 250V AC
UL/CSA
CS8365C
50A
3Ø 480V AC
UL/CSA
2.59"
(65.8)
CS6365C
CS8165C
3.50"
(88.9)
90°
Note: See page B-60 for accessories.
Flanged Inlets
Description
Catalog Number
Zinc plated steel casing,
thermoset interior.
CS6375
Zinc plated steel casing,
thermoset interior with lift cover.
Gray Valox® housing and flange.
1.50"R
(38.0)
CS8375
CS8175
CS6375M2
–
–
HBL6375S*
–
–
.19"
(4.8)
DIA.
2.62"
(66.5)
2.17"
(55.1)
CS6375
Note: *Type 3R.
2.63"
(66.8)
1.50"R
(38.0)
Y
IP20
W
SUITABILITY
X
Z
G
50A
125/250V AC
UL/CSA
Connector Bodies
Y
Y
X
X
Description
Cord Dia.
Catalog Number
Nylon cover, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
CS6364C
Z
G
50A
3Ø 250V AC
UL/CSA
CS8364C
2.19"
(55.6)
G
50A
3Ø 480V AC
UL/CSA
.19"
(4.8)
DIA.
90°
3.50"
(88.9)
CS8164C
CS6375M2
Note: See page B-60 for accessories.
6.34"
(161.0)
Receptacles
Description
Catalog Number
Black phenolic.
CS6369
CS8369
CS8169
2.59"
(65.8)
Note: See page B-60 for accessories.
CS6364C
2.13"
(54.1)
2.69" 3.28"
(68.3) (83.3)
1.03"
(26.2)
2.44"
(62.0)
CS6369
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
B-57
Twist-Lock® Devices
50 Ampere, 250 Volts DC and 600 Volts AC
2 Pole, 3 Wire Grounding
6.38"
(162.0)
IP20
SUITABILITY
2.59"
(65.8)
HBL3763C
Plugs
Y
X
G
50A 250V DC
50A 600V AC
Description
Cord Dia.
Nylon housing, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
HBL3763C
Note: See page B-60 for accessories.
3.50"
(88.9)
90°
Flanged Inlets
Description
.19"
(4.8)
DIA.
1.50"R
(38.0)
2.62"
(66.5)
2.17"
(55.1)
Zinc plated steel casing,
thermoset interior.
HBL3777
Zinc plated steel casing,
thermoset interior with lift cover.
HBL3767
HBL3777
2.63"
(66.8)
1.50"R
(38.0)
IP20
2.19"
(55.6)
. 19"
(4.8)
DIA.
90°
3.50"
(88.9)
Connector Bodies
SUITABILITY
50A 250V DC
50A 600V AC
Description
Cord Dia.
Nylon housing, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
HBL3762C
Note: See page B-60 for accessories.
HBL3767
6.34"
(161.0)
.63"
(16.0)
Receptacles
Description
2.59"
(65.8)
Black phenolic.
HBL3771
Note: See page B-60 for accessories.
See page B-71 for technical Information.
HBL3762C
2.13"
(54.1)
2.69" 3.28"
(68.3) (83.3)
1.03"
(26.2)
2.44"
(62)
HBL3771
Dimensions in Inches (mm)
B-58
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
50 Ampere, 250 Volts DC and 600 Volts AC
3 Pole, 4 Wire Grounding
Important Note: Catalog numbers HBL7765C, HBL7958, HBL7968, HBL7764C, HBL7379 are
for replacement use only. See other singly rated 50A Twist-Lock® devices in this section.
HBL3700 series Twist-Lock devices do not interchange with any other devices in this section.
Z
X
Z
G
Y
G
50A 600V AC
50A 250V DC
Plugs
6.38"
(162.0)
X
Y
50A 600V AC
50A 250V DC
Description
Cord Dia.
Catalog Number
Nylon cover, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
HBL3765C
2.59"
(65.8)
HBL7765C
HBL3765C
Note: See page B-60 for accessories.
2.63"
(66.8)
1.50"R
(38.0)
Flanged Inlets
2.19"
(55.6)
Description
Catalog Number
Zinc plated steel casing,
thermoset interior.
HBL3775
HBL7958
Zinc plated steel casing,
thermoset interior with lift cover.
HBL3768
HBL7968
.19"
(4.8)
DIA.
90°
3.50"
(88.9)
HBL3768
X
Y
Z
X
Z
Connector Bodies
3.50"
(88.9)
90°
Y
G
G
50A 600V AC
50A 250V DC
50A 600V AC
50A 250V DC
Description
Cord Dia.
Catalog Number
Nylon cover, thermoplastic
polyester interior.
.830"-1.250"
(21.08-31.75)
HBL3764C
.19"
(4.8)
DIA.
1.50"R
(38.0)
2.62"
(66.5)
HBL7764C
Note: See page B-60 for accessories.
2.17"
(55.1)
HBL3775
6.34"
(161.0)
Receptacles
Description
Catalog Number
Black phenolic.
HBL3769
HBL7379
Note: See page B-60 for accessories.
2.59"
(65.8)
HBL3764C
2.13"
(54.1)
2.69"
(68.3)
1.03"
(26.2)
3.28"
(83.3)
2.44"
(62.0)
HBL3769
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-59
Twist-Lock® Devices
50 Ampere Twist-Lock® Accessories
IP44
SUITABILITY
Weatherproof Receptacle Lift Cover Plates for FS/FD Box Mounting
HBL7774WO
Description
Catalog Number
Corrosion resistant, gray thermoplastic.
HBL7774WO
Same as above except yellow.
HBL77CM74WO
Cast aluminum.
HBL7770
Note: See section N for additional information on weatherproof plates.
Receptacle Plates for FS/FD Box Mounting
HBL7770
Description
Catalog Number
Cast aluminum with lift cover.
Same as above less lift cover.
HBL7382•*
HBL7383•
Stainless steel, single gang, wallplate.
SS750
Receptacle ½" Raised Cover
Description
Catalog Number
Galvanized Steel fits 4" square or 2-gang box.
HBL50SC
IP55**
SUITABILITY
Weatherproof Boots
HBL7382
Description
Catalog Number
Seal-Tite®
triple seal black elastomeric cover for plugs when used in a cord set
and connector bodies when used with flanged inlets.
HBL7716C†
Seal-Tite triple seal black elastomeric cover for connector bodies when used
with cord sets.
HBL7717C†
Inlet Closure Plug
HBL50SC
Description
Catalog Number
Black closure plug.
HBL4892†
Replacement Parts
Description
Catalog Number
Cord clamp Kit.
HBLCSCK
Note: •Will only fit non-“CS” type 50A Twist-Lock receptacles.
*Not UL Listed “WDL Closed”.
**When installed and used properly with plug and connector body combinations.
IP20 SUITABILITY.
†Not UL Listed.
SS750
HBL7716C
B-60
HBL7717C
HBL4892
®
Wiring Device-Kellems
HBLCSCK
www.hubbell-wiring.com
Hubbellock® Devices
Plugs and Connector Bodies
Features and Benefits
Three-piece thermoplastic clamp assembly
with fast-lead stainless screws provides a
more consistent durable grip. Grommets
provide a sealed cable entry that protects
against the entry of moisture and dust
HBL21414B
Impact resistance in the interior of the
female device comes from a strong
thermoplastic material
Superior wire terminations are assured
with box terminals and screws with
pressure pads. This design captures stray
wire strands and permits more clamping
pressure on the wire without damaging it.
Loosening of terminations and resulting
heat build-up are greatly reduced
No “lazy” connections because a springloaded safety shutter automatically ejects
the plug if it hasn’t been properly locked
into the female device. This eliminates
teasing of the contacts, a major cause
of contact burn-up
Arcs are snuffed out, when devices
are mated or unmated under load, by
spring-loaded safety shutter
Longer contact life is assured by
supplementary springs. Other
devices rely just on contacts
themselves to provide proper
contact pressure
Enhanced safety because access to
live female contacts is restricted by the
spring-loaded safety shutter
Positive locking is ensured by the nose
of the plug being keyed into
a detent in female device. This lock is
independent of the contacts or
a separate mechanical lock
Insulated non-metallic housing
enhances safety and abuse
resistance
HBL21415B
Note: Above cut-away view and call-outs are construction elements pertaining specifically to the 30A Hubbellock series.
While the Hubbellock contact interface design applies to all, there are construction elements that are different, depending on the amperage.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-61
Hubbellock® Devices
20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
3.22"
(81.8)
IP30
GR
SUITABILITY
1.72"
(43.7)
2.31"
(58.7)
W
Plug
20A 125V
Description
Cord Dia.
Catalog Number
Nylon housing, thermoset interior.
.320"-.660"
(8.12-16.5)
HBL23035B
HBL23035B
3.56"
(90.4)
GR
W
Connector Body
1.72"
(43.7)
1.63"
(41.4)
20A 125V
Description
Cord Dia.
Catalog Number
Nylon housing, thermoset interior.
.320"-.660"
(8.12-16.5)
HBL23032B
HBL23032B
GR
#6-32
TAP
1.38" 2.38" 3.28"
(35.1) (60.5) (83.3)
2.50"
(63.5)
1.66"
(42.2)
W
Receptacle
20A 125V
Description
Catalog Number
Black phenolic, back wired.
HBL23030
Note: Devices listed above are not interchangeable with any other Hubbellock device listed in this catalog.
HBL23030
Accessories
Weatherproof Covers
HBL7423WO
Description
Catalog Number
Gray polycarbonate for FS/FD box mounting, corrosion resistant.
IP44 SUITABILITY.
HBL7423WO
Same as above except yellow.
HBL74CM23WO
Cast aluminum, lift cover for indoor use only.
HBL23007
Stainless steel 302/304, single receptacle wallplate.
SS7
Stainless steel 430, single receptacle wallplate.
SS7L
HBL23007
Dimensions in Inches (mm)
B-62
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hubbellock® Devices
20 Ampere, 125 Volts AC or DC, 10 Ampere, 250 Volts DC, 480 Volts AC
2 Pole, 3 Wire Grounding
IP30
GR
SUITABILITY
2.31"
(58.7)
Y
X
Plug
20A 125V
Description
Cord Dia.
Catalog Number
Nylon housing, thermoset interior.
.320"-.660"
(8.12-16.5)
HBL23005GB
1.72"
(43.7)
3.22"
(81.8)
HBL23005GB
Y
3.56"
(90.4)
GR
X
Connector Body
20A 125V
Description
Cord Dia.
Catalog Number
Nylon housing, thermoset interior.
.320"-.660"
(8.12-16.5)
HBL23002GB
1.72"
(43.7)
1.63"
(41.4)
HBL23002GB
Y
1.66"
(42.2)
GR
X
Receptacle
20A 125V
Description
Catalog Number
Black phenolic, back wired.
HBL23000G
2.50"
(63.5)
1.38" 2.38" 3.28"
(35.1) (60.5) (83.3)
#6-32
TAP
HBL23000G
Accessories
Weatherproof Covers
Description
Catalog Number
Gray polycarbonate for FS/FD box mounting, corrosion resistant.
IP44 SUITABILITY.
HBL7423WO
Same as above except yellow.
HBL74CM23WO
Cast aluminum, lift cover for indoor use only.
HBL23007
Stainless steel 302/304, single receptacle wallplate.
SS7
Stainless steel 430, single receptacle wallplate.
SS7L
HBL7423WO
HBL23007
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-63
Hubbellock® Devices
30 Ampere, 600 and 480 Volts AC, 20 Ampere, 250 Volts DC
3 Pole, 4 Wire Grounding and 4 Pole, 5 Wire Grounding
.88"
(22.4)
IP30
4.75"
(120.7)
HBL21415B
4.75"
(120.7)
2.33"
(59.2)
4.75"
(120.7)
2.50"
(63.5)
2.33"
(59.2)
HBL25415B
4.56"
(115.8)
Z
GR
Z
Y
GR
Y
4P 5W
GR
W
Y
X
X
Plugs
30A 480V AC
30A 600V AC
20A 250V DC
X
30A 600V AC
20A 250V DC
Description
Cord Dia.
Catalog Number
Black nylon housing,
thermoplastic interior.
.700"-1.200"
(17.78-30.5)
HBL21415B
–
–
Same as above except
corrosion resistant.
.700"-1.200"
(17.78-30.5)
HBL21CM415B
–
–
Red nylon housing,
thermoset interior.
.700"-1.200"
(17.78-30.5)
–
HBL20445B†
–
Black nylon housing,
thermoset interior,
steel shroud.
.700"-1.200"
(17.78-30.5)
–
–
HBL25415B
Note: See page B-68 for accessories.
†Not CSA Certified.
HBL20445B
.88"
(22.4)
3P 4W
Z
SUITABILITY
2.33"
(59.2)
.88"
(22.4)
3P 4W
Flanged Inlets
Description
Catalog Number
Weathertight, corrosion resistant, nickel plated
brass plate, for FS/FD box mounting.
HBL22CM428
–
–
Black phenolic interior, aluminum housing,
for FS/FD box mounting (not shown).
HBL20418
–
–
Aluminum angle housing, with ¾" NPT hub
for surface mounting.
HBL21447
–
–
3.25"
(82.6)
5.31"
(134.9)
2.69"
(68.3)
HBL21447
SEHBL3 - Switched enclosure for use with 3 pole 4 wire
30A Hubbellock receptacle. Receptacle not included.
See page B-37 for additional information.
Dimensions in Inches (mm)
B-64
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hubbellock® Devices
30 Ampere, 600 and 480 Volts AC, 20 Ampere, 250 Volts DC
3 Pole, 4 Wire Grounding and 4 Pole, 5 Wire Grounding
IP30
3P 4W
3P 4W
Z
Z
GR
Y
4P 5W
Z
W
GR
Y
Y
GR
.88"
(22.4)
5.08"
(129.0)
SUITABILITY
X
X
Connector Bodies
X
30A 480V AC
30A 600V AC
20A 250V DC
30A 600V AC
20A 250V DC
Description
Cord Dia.
Catalog Number
Black nylon housing,
thermoplastic interior.
.700"-1.200"
(17.78-30.5)
HBL21414B
–
–
Same as above except
corrosion resistant.
.700"-1.200"
(17.78-30.5)
HBL21CM414B
–
–
Red nylon housing,
thermoset interior.
.700"-1.200"
(17.78-30.5)
–
HBL20444B
–
Black nylon housing,
thermoplastic interior.
.700"-1.200"
(17.78-30.5)
–
–
HBL25414B
2.44"
(62.0)
HBL21414B
.88"
(22.4)
5.08"
(129.0)
2.44"
(62.0)
Note: See page B-68 for accessories.
HBL20444B
Receptacles
Description
Catalog Number
Black phenolic.
HBL20403
Weathertight, corrosion resistant, nickel plated
brass plate, for FS/FD box mounting.
IP44 SUITABILITY.
HBL22CM427
Aluminum angle housing, with ¾" NPT hub
for surface mounting. IP44 SUITABILITY.
HBL21420
.88"
(22.4)
–
5.91"
(150.1)
–
2.5"
(63.5)
2.69"
(68.3)
HBL25414B
Black phenolic, red center insert.
–
HBL20443
–
Black phenolic interior, aluminum housing,
blue finish, for FS/FD box mounting.
–
–
HBL25403
Black phenolic interior, aluminum weatherproof
housing, blue finish for FS/FD box mounting.
IP44 SUITABILITY.
–
–
HBL25250
1.75"
(44.5)
1.22"
(31.0)
3.28" 2.69"
(83.3) (68.3)
Note: See page B-68 for accessories.
1.94"
(49.3)
Receptacle Accessories
Description
Catalog Number
Thermoplastic, wet and damp locations with cover “open”, gray.
HBL7428WOG*
Thermoplastic, wet and damp locations with cover “open”, yellow.
HBL7428WOY*
Thermoplastic, wet and damp locations with cover “open”, red.
HBL7428WOR*
Cast aluminum, wet locations only when cover “closed” and damp locations, lift cover plate.
HBL20405
Cast aluminum, wet locations only when cover “closed” and damp locations, red finish.
HBL20446
302/304 stainless, single gang, smooth. NOT weatherproof.
SS737
1.94"
(49.3)
HBL20403
4.56"
(115.8)
3.25"
(82.6)
5.31"
(134.9)
Note: *Features two #6-32 threaded inserts to back mount device to cover.
4- #6-32
SCREWS
3.00"
(76.2)
4- #6-32
SCREWS
2.69"
(68.3)
2.84"
(72.1)
1.88"
(47.8 )
HBL21420
1.94"
(49.3)
4.56" 3.25"
(115.8) (82.6)
4.56" 3.25"
(115.8) (82.6)
1.88"
(47.8 )
2.84"
(72.1)
HBL25250
1.22"
(31.0)
3.28" 2.69"
(83.3) (68.3)
1.66"
(42.2)
2.48"
(49.3)
HBL25403
1.94"
(49.3)
HBL20443
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-65
Hubbellock® Devices
60 Ampere, 600 Volts AC
3 Pole, 4 Wire Grounding and 4 Pole, 5 Wire Grounding
3P 4W
4.81"
(122.2)
IP30
1.09"
(27.7)
HBL26419
X
W
GR
Y
Y
GR
SUITABILITY
Z
Plugs
3.03"
(77.0)
4.81"
(122.2)
4P 5W
X
60A 600V
Description
Cord Dia.
Catalog Number
Black phenolic interior with yellow
thermoplastic sleeve over steel housing.
.920"-1.450"
(23.36-36.83)
HBL26419
Black phenolic interior with blue
thermoplastic sleeve and steel housing.
1.00"-1.50"
(25.40-38.10)
–
Z
60A 600V AC
–
HBL26519
1.09"
(27.7)
3.03"
(77.0)
IP30
SUITABILITY
Flanged Inlets
HBL26519
2.73"
(69.3)
3.94"
(100.1)
4.13"
(104.9)
3.50"
(88.9)
2.69"
(68.3)
Description
Catalog Number
Black phenolic interior with steel
housing and flange.
HBL26422
Black phenolic interior with steel
housing and flange with blue finish.
–
–
HBL26522
HBL26422
2.73"
(69.3)
3.94"
(100.1)
4.13"
(104.9)
2.69"
(68.3)
3.50"
(88.9)
HBL26522
Dimensions in Inches (mm)
B-66
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hubbellock® Devices
60 Ampere, 600 Volts AC
3 Pole, 4 Wire Grounding and 4 Pole, 5 Wire Grounding
3P 4W
4P 5W
IP30
GR
GR
Y
SUITABILITY
X
W
Y
Z
Z
Connector Bodies
4.88"
(124.0)
1.09"
(27.7)
X
60A 600V
3.19"
(81.0)
60A 600V AC
Description
Cord Dia.
Catalog Number
Black phenolic interior with yellow
thermoplastic sleeve over steel cover.
.920"-1.450"
(23.36-36.83)
HBL26418
Black phenolic interior with blue
thermoplastic sleeve over steel cover.
1.00"-1.50"
(25.40-38.10)
–
HBL26418
–
HBL26516
5.44"
(138.2)
1.09"
(27.7)
IP44
Receptacles
3.19"
(81.0)
SUITABILITY
Description
Catalog Number
Black phenolic interior with short aluminum
housing and lift cover.
HBL26410
–
Black phenolic interior with long aluminum
housing and lift cover.
HBL26420
–
–
Black phenolic interior with long aluminum
housing with lift cover and blue finish.
HBL26516
1.75"
(44.5)
3.63"
(92.2)
HBL26520
3.50"
(88.9)
sq. 2.88"
(73.2)
IP30
Flanged Receptacles
1.84"
(46.7)
.25 DIA.
SUITABILITY
Description
Catalog Number
Black phenolic interior with steel housing
and flange.
HBL26421
–
–
Black phenolic interior with steel housing
and flange with blue finish.
3.63"
(92.2)
4.88"
(124.0)
HBL26521
3.50"
(88.9)
sq.
Receptacle Box and Adapter Plates
HBL26410
2.88"
(73.2)
HBL26420
(Box requires one adapter)
Description
Catalog Number
Box, cast aluminum, only for 60A Hubbellock receptacles.
HBL26401
Straight adapter plate.
HBL26402
45° adapter plate.
HBL26404
Note: Straight or angle adapter plate must be used when mounting a 60A receptacle to HBL26401 box.
Cannot be used with round flanged receptacles and inlets.
See page B-68 for additional information.
4.88"
(123.9)
3.63"
(92.2)
3.50"
(88.9)
sq.
2.88"
(73.2)
HBL26520
3.31"
(84.1)
4.52"
(114.8)
4.53"
(102.13)
2.69"
(68.3)
3.50"
(88.9)
4.13"
(104.9)
2.86" 4.12"
(72.6) (104.6)
2.69"
(68.3)
2.86"
(72.6)
3.31"
(84.1)
HBL26421
HBL26521
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-67
Hubbellock® Devices
Hubbellock® Accessories
30 Amp Hubbellock® Accessories
Receptacle Plates for FS/FD Box Mounting
HBL20405
Description
Catalog Number
Thermoplastic, wet and damp locations with cover “open”, gray.
HBL7428WOG*
Thermoplastic, wet and damp locations with cover “open”, yellow.
HBL7428WOY*
Thermoplastic, wet and damp locations with cover “open”, red.
HBL7428WOR*
Cast aluminum, wet location only when cover “closed” and damp locations, lift cover plate.
HBL20405
Cast aluminum, wet location only when cover “closed” and damp locations, red finish.
HBL20446
302/304 stainless, single gang, smooth. NOT weatherproof.
SS737
Note: *Features two #6-32 threaded inserts to back mount device to cover.
IP54
Switched Enclosure
SUITABILITY
Description
Catalog Number
Switched enclosure for use with 30A 3 pole 4 wire Hubbellock receptacle.
Receptacle not included.
SEHBL3
Note: For more information on switched enclosures see page B-37.
Liquidtight Metallic Conduit Adapters (Not Shown)
SEHBL3
Description
Catalog Number
Adapter for use with ½" NPT conduit fittings.
SAB12
Adapter for use with ¾" NPT conduit fittings.
SAB34
Boots
Description
Catalog Number
“Mini” boot for Hubbellock connector body.
HBL20424B†
“Mini” boot for Hubbellock plug.
HBL20425B†
Note:
†Not
UL Listed or CSA Certified.
60 Amp Hubbellock® Accessories
SAB34
Receptacle Box and Adapter Plates (Box requires one adapter)
Description
Catalog Number
Box, cast aluminum, only for 60A Hubbellock receptacles.
HBL26401
Straight adapter plate.
HBL26402
45° adapter plate.
HBL26404
Note: Straight or angle adapter plate must be used when mounting a 60A receptacle to HBL26401 box.
Cannot be used with round flanged receptacles and inlets.
HBL20424B
Kellems® Cable Grip
Description
Cord Diameter
Catalog Number
Cable grip.
.830"-1.000" (21.1-25.4)
H660A
Cable grip (not shown).
1.000"-1.140" (25.4-28.9)
H661A
Cable grip (not shown).
1.125"-1.328 (28.6-33.7)
H662A
4.50"
(114.3)
3.88"
(98.6)
HBL20425B
4.50"
(114.3)
3.88"
(98.6)
3.88" 4.50"
(98.6) (114.3)
2.18"
(55.4)
2.88" 3.88"
(73.2) (98.6)
4.50"
(114.3)
4.50" 3.88"
(114.3) (98.6)
1.50" NPT
H660A
4.50"
(114.3)
3.88"
(98.6)
HBL26401
.22"
(5.6) .41"
(10.4)
2.88"
(73.2)
3.53"
(89.7)
HBL26402
HBL26404
Dimensions in Inches (mm)
B-68
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® and Safety Shroud Devices
Technical Information
15-30 Ampere Twist-Lock, 20-30 Ampere Safety-Shroud® Twist-Lock
Specifications
Listings
Listed to UL Standard 498 (Attachment Plugs and Receptacles).
Fed. Spec. W-C-596 (Insulgrip® and Safety-Shroud®).
Certified to CSA Standard C22.2 No.42 (General Use Receptacles, Attachment Plugs and Similar Wiring Devices).
Plugs and Connector
Bodies (Insulgrip®)
15-30A
Blade/Contact Carrier
Natural (white) nylon
Terminal Retainer
Clear polycarbonate
Cover (Housing)
Black nylon (yellow in “CM” devices)
Cord Clamp
Natural (white) nylon
Dust Shield
EPDM
Blades/Contacts
Brass
Terminal Clamp
Cold rolled steel – nickel plated
Terminal Screws
15A (8-32), 20-30A (10-32) Brass (white
finish on neutral screw when used)
Grounding Screw
Brass (green finish)
Cord Clamp Screws
Steel, zinc plated
Body Holding Screws
Steel, zinc plated
Safety-Shroud®
Receptacles Angle,
Surface Semi-Flush
Housing and
Mounting Flange
Mounting Plate
(Angle Housing Only)
Body Contact Carrier
Terminal Retainer
Body Holding Screws
Contact Springs
Spring Binding Plate
Terminal Clamp
Terminal Screws
Grounding Screw
Mounting Plate Screws
Wallplate Mounting
Screws
20-30A
Gray Valox®
Galvanized steel
Natural (white) nylon
Clear polycarbonate
Steel, zinc plated
Brass
Brass
Steel, nickel plated .080" curved, scalloped
10-32 Brass (white finish on neutral screw
when used)
Brass (green finish)
Steel, zinc plated
Steel, zinc plated
Flanged Inlet/
Receptacles
15-30A
Flanged Casing
Natural (white) nylon
Blade/Contact Carrier
Natural (white) nylon
Terminal Retainer
Clear polycarbonate
Safety-Shroud®
Twist-Lock® Plug
Blades/Contacts
Brass
Insulgrip Plug with Safety-Shroud installed
Drive Screws
Steel, zinc plated
Terminal Clamp
Cold rolled steel, nickel plated
Safety-shroud
Cord Clamp
Terminal Screws
15A (8-32), 20-30A (10-32) Brass (white
finish on neutral screw when used)
Performance (Twist-Lock® and Safety Shroud Devices)
Grounding Screw
Brass (green finish)
Mounting Screws
Screw Sizes
Nickel plated brass round head screws
15A: 6-32, ³⁄₈" long
20A and 30A: 8-32, ⁷⁄₁₆" long
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Receptacle, Single
15A
20A and 30A
Temperature Rise
Fed. Spec.
Cover (Top)
Nylon (Black)
Nylon (Black)
Base
RTP (Black)
RTP (Natural)
Contact Springs
.031" Brass
.040" Brass
Clamp
.031" Brass
.040" Brass
Ground Contact
.031" Brass
.040" Brass
–
.015" Brass
.050" Steel,
zinc plated
–
End Plates (Mounting)
–
.050" Brass
Back Plate
–
.040" Brass
Ground Shunt
Bridge (Mounting
Strap)
20-30A
White Valox®
White nylon
Electrical
Terminal Screws
Brass (8-32)
Brass (10-32) (white finish on
neutral screw when used)
Grounding Screw
Brass (Green)
Bronze (Green)
Flat Head Mounting
Screws
Steel, zinc plated
Steel, zinc plated
Auto Ground Clip
Stainless steel
Stainless steel (Used only
on IG receptacle)
Withstands 2,000V minimum.
600 Volts RMS.
Certified for current interrupting at full
rated current.
Max 30°C temperature rise at full rated current
after 250 cycles of overload at 200% of rated
current at a power factor of 75% (WC 596).
Mechanical (Twist-Lock® and Safety Shroud Devices)
Cord Accommodation
Round portable service cords of diameters
(Plugs and connectors
commensurate with the device rating as defined
only)
in UL Standard 62, CSA C22.2 No. 49.
Cord Grip
15A: .230"-.720" (5.8-18.3); 20A and 30A 3W:
Accommodation
.360"-.930" (9-24); 20A and 30A 4W-5W:
(Insulgrip)
.350"-1.150" (9-29).
Terminal Identification
Terminals identified in accordance with
UL 498 (X, Y, Z, White, Green).
Terminal
20A and 30A, #16-#8 AWG. 15A, #18-#10 AWG.
Accommodation
Solid or stranded copper wire only.
Product Identification
Ratings are a permanent part of the device housing.
Environmental (Twist-Lock® and Safety Shroud Devices)
Flammability
HB or better per UL94/CSA 22.2 No. 0.17.
(Enclosure)
Plugs, Connectors,
V2 or better.
Flanged Receptacles
and Flanged Inlets
Receptacles (Box Mount)
Operating
Maximum Continuous 75°C.
Temperatures
Minimum -40°C (w/o impact).
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-69
Watertight Safety-Shroud® Twist-Lock® Devices
Technical Information
20 and 30 Ampere
Specifications
Listings
Listed to UL Standard 498 (Attachment Plugs and Receptacles).
Certified to CSA Standard No.42 (General Use Receptacles, Attachment Plugs and Similar Wiring Devices).
Fed. Spec. WC-596.
UL Listed, CSA Certified to Type 4, 4X and Type 12.
Part
Materials
Watertight Safety-Shroud® Plug (Insulgrip®)
20 and 30A
Blade Holder
Terminal Retainer
Cover (Housing)
Cord Clamp
Blades
Terminal Clamp
Terminal Screws
Grounding Screw
Cord Clamp Screws
Body Holding Screws
Closure Cap and Strap
Natural (white) nylon
Clear polycarbonate
Black Valox®
White Valox®
Brass
Steel, nickel plated .080" curved scalloped
10-32 brass (white finish on neutral screw when used) multiple drive head
Brass (green finish) combination head
Stainless steel 302/304, combination head
Stainless steel 302/304, combination head
Neoprene EPDM Blend
Watertight Safety-Shroud® Connector (Insulgrip®) 20 and 30A
Body Contact Carrier
Terminal Retainer
Contact Spring
Spring Binding Plate
Cover (Housing)
Cord Clamp
Terminal Clamp
Terminal Screws
Grounding Screw
Cord Grip Screws
Body Holding Screws
Closure Cap and Strap
Natural (white) nylon
Clear polycarbonate
Brass
Brass
Black Valox®
White Valox®
Steel, nickel plated .080" curved scalloped
10-32 brass (white finish on neutral screws when used) multiple drive head
Brass (green finish) combination head
Stainless steel 302/304, combination head
Stainless steel 302/304, combination head
Polypropylene with Neoprene gasket
Watertight Safety-Shroud Receptacle, Single*
20 and 30A
Housing and Flange
Body Contact Carrier
Terminal Retainer
Drive Screws
Contact Spring
Spring Binding Plate
Terminal Clamp
Flange Gasket
Lid Gasket
Cover Hinge Pin
Cover Spring
Terminal Screws
Grounding Screw
Mounting Screws
Gray Valox
Natural (white) nylon
Clear polycarbonate
Steel, zinc plated
Brass
Brass
Steel, nickel plated .080" curved, scalloped
Closed-cell neoprene foam
Closed-cell neoprene foam
Stainless steel 302/304
Stainless steel 302/304
10-32 brass (white finish on neutral screw when used) multiple drive head
Brass (green finish) combination head
Stainless steel 302/304 combination head
Watertight Safety-Shroud® Flanged Inlet
20 and 30A
Housing and Flange
Blade Holder
Terminal Retainer
Blades
Drive Screws
Terminal Clamp
Terminal Screws
Grounding Screw
Closure Cap
Mounting Screws
Gray Valox
Natural (white) nylon
Clear polycarbonate
Brass
Steel, zinc plated
Steel, nickel plated .080" curved scalloped
10-32 brass (white finish on neutral screw when used) multiple drive head
Brass (green finish) combination head
Neoprene EPDM blend
Stainless steel 302/304 combination head
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Mechanical
Cord Accommodation (Plugs and connectors only)
Cord Grip Accommodation
Terminal Identification
Terminal Accommodation
Product Identification
Environmental
Moisture Resistance
Flammability (Enclosure)
Operating Temperatures
Note: *Suitable for use as a flanged receptacle.
Withstands 2,000V minimum.
600 Volts RMS.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 250 cycles of overload at
200% of rated current at a power factor of 75% (WC 596).
Round portable service cords of diameters commensurate with the device rating
as defined in UL Standard 62, CSA C22.2 No. 49.
20 and 30A, 3W: .32"-.93" (8.1-24.0mm) #16-3 Type SJ-#8-3 Type S, SO;
20 and 30A, 4W: .35"-1.15" (9.0-29.2mm) #16-4 Type SJ-#8-4 Type S, SO;
20 and 30A, 5W: .35"-1.15" (9.0-29.2mm) #16-5 Type S, SO - #8-5 Type S, SO.
Terminals identified in accordance with UL 498 (X, Y, Z, White, Green).
#16- #8 AWG solid or stranded copper wire only.
Ratings are a permanent part of the device blade holder, and are also labeled on device
color coded by voltage, visible in use. Catalog No. I.D. is on device visible in use.
Type 4, 4X, 12, IP66 suitability.
V0 per UL94 or CSA 22.2 No. 0.17.
Maximum Continuous 75°C; Minimum -40°C (w/o impact).
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
B-70
®
Wiring Device-Kellems
www.hubbell-wiring.com
Twist-Lock® Devices
Technical Information
50 Ampere
Specifications
Listings
Listed to UL Standard 498 (Attachment Plugs and Receptacles).
Certified to CSA Standard No. 42 (General Use Receptacles, Attachment Plugs and Similar Wiring Devices).
Part
Materials
Part
Materials
Plug (Twist-Lock)
Blade Holder
Power Blades
Terminal Set Screw
Terminal Retainer
Front and Rear (housing)
Cord Clamp
Seal
Seal Cup
Box Terminal
Latches
Ground Contact Spring
Cord Clamp Screws
Shroud
50A
Thermoplastic polyester (black)
Brass
Stainless steel
Thermoplastic polyester
Supertough nylon
Thermoplastic polyester (white)
Neoprene
Nylon
Copper
Supertough nylon
One piece copper/nickel
302/304 Stainless steel
302/304 Stainless steel
Flanged Inlet
Flanged Casing
Blade Holder
Pressure Screws
Blades
Ground Spring
Terminals
Grounding Terminal
Round Head Screws
50A
.062" Steel, zinc plate
Phenolic
Steel, zinc plate
.100" Brass
.025" Bronze
.050" Steel, brass finish
.062" Copper, green finish
Steel, zinc plate
Connector (Twist-Lock)
Contact Nose
Terminal Retainer
Terminal Set Screw
Contact Spring
Assembly Ring
Front and Rear (housing)
Latches
Cord Clamp
Box Terminal
Contact Holder
Ground Contact
Seal Cup
Cord Grip screws
Seal
50A
Nylon (black)
Thermoplastic polyester (black)
302/304 Stainless steel
Brass
302/304 Stainless steel
Supertough nylon (black)
Supertough nylon (white)
Thermoplastic polyester (white)
Copper
Thermoplastic polyester (black)
One piece copper/nickel
Nylon
302/304 Stainless steel
Neoprene
Receptacle
Body
Face
Contact Springs
Contact Binding Plates
Ground Contact
Insulator
Bridge (Mounting Strap)
Pressure Screws
Terminals
Casing
Center Pin (CS Devices)
50A
Phenolic
Phenolic
.100" Brass alloy
.100" Brass
.031" Brass
.093" Laminated phenolic
.062" Steel, zinc plate
Steel, zinc plate
.050" Steel
.062" Steel, zinc plate
Steel, zinc plate
Product Identification
Ratings
Catalog Number
Molded into face for all devices and stamped into stainless steel shroud on plug devices.
Molded into face for plug and connector bodies and stamped into stainless steel shroud on plug devices.
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
600 Volts RMS.
Certified for current interrupting at full rated current.
Max. 30°C temperature rise at full rated current after 50 cycles of overload at
150% rated DC current (UL 498).
Mechanical
Terminal Accommodation
Cord Grip Accommodation
#10 AWG min. - #6 AWG max. Solid or stranded copper wire only.
.750"-1.150" (19.1-29.2).
Environmental
Flammability
Operating Temperatures
UL 94 V0 for Receptacles and Inlets. HB or better for Plugs and Connectors.
Maximum continuous 75°C; minimum –40°C (w/o impact).
Note: Please consult the factory for product dimensions and specifications for other products listed in this catalog.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-71
Switched Safety Enclosures
Technical Information
Switched Twist-Lock® and Hubbellock® Enclosures
Specifications
Typical Specifications
Manufacturer’s Identification
Description
Electrical Type
Rating
Configuration
Enclosure Type
Enclosure Material
Hubbell SETL3/SEHBL3-SE2730A.
Lockable Switched Enclosure. This unit is a complete enclosure ready
to accept any 20 or 30A Twist-Lock or 30A Hubbellock receptacle.
2 Pole + Earth through 4 Pole and Earth.
20 or 30A, 125V through 3ØY 347/600V AC.
NEMA Locking L5-20R through L23-30R.
Outdoor – Type 3R (Rainproof, Sleet, External Ice), IP54 suitability.
Indoor – Type 12K (Dust-tight, Falling Dirt, Noncorrosive Liquids, with Knockout).
Non-metallic enclosure suitable for metallic conduit.
Materials
Part
Materials
Base
Top
Handle
Conduit Hub
Enclosure Gasket
Shaft
Shaft Seal
Frame
Lift Cover
Enclosure Screws
Hinge Spring and Pin
Valox®
Valox®
Valox®
Zinc ¾" watertight
Neoprene
Valox®
Molded neoprene
Galvanized steel
Valox®
Stainless steel 300 series
Stainless steel 300 series
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Withstand
Operations
Withstands 3,000V minimum.
600V RMS.
Certified for current interrupting at full rated current and voltage.
Suitable for use on a circuit capable of delivering not more than 10,000
RMS symmetrical amperes at the voltage rating of the receptacle.
Mechanical 10,000 cycles;
Electrical 6,000 cycles.
Mechanical
Impact Resistance
Terminal Identification
Product Identification
Weight
Mounting
In accordance with UL 746C.
In accordance with UL, CSA and international conventions.
Identification and ratings are part of external label and receptacle face.
3.5 pounds.
External fully adjustable feet.
Environmental
Moisture Resistance
Flammability
Operating Temperature
UV Resistance
Outdoor – Type 3R (Rainproof, Sleet, External Ice), IP54 suitability.
Indoor – Type 12K (Dust-tight, Falling Dirt, Noncorrosive Liquids, with Knockout).
UL94 – 5 VA and V0 classification.
Maximum continuous +75°C;
Minimum continuous -40°C.
All materials are UV stabilized.
Note: This device provides on/off switched control of a plug connected load and includes lockout provision: ON-OFF control knob (in the OFF position) accepts up to a
5 ⁄₁₆" (8.0) diameter shackle of suitable padlock lockout device to isolate energy from the receptacle and cord connected equipment as a method of compliance to
OSHA Lockout/Tagout Regulation 29CRF Part 1910.147.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
B-72
®
Wiring Device-Kellems
www.hubbell-wiring.com
Switched Safety Enclosures
Technical Information
Mechanical Interlock Switched Safety Enclosures
Specifications
Typical Specifications
Manufacturer’s Identification
Description
Electrical Type
Rating
Enclosure Type
Enclosure Material
Hubbell HBLMITL.
Circuit-Lock Mechanical Interlock.
2 Pole + Earth through 4 Pole and Earth.
Up to 30A, 3Ø 600V AC.
Outdoor – 4X (Watertight, Washdown);
Indoor – 12K (Dust-tight, Falling Dirt and noncorrosive liquids with knockout.
IP66 suitability.
Non-metallic enclosure suitable for metallic conduit.
Materials
Part
Material
Base
Top
Handle
Conduit Hub
Enclosure Gasket
Shaft
Shaft Seal
Frame
Enclosure Screws
Valox®
Valox®
Valox®
Zinc ¾" watertight
Neoprene
Valox®
Neoprene
Galvanized steel
Stainless steel 300 series
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Withstand Rating
Operations
Withstands 3,000V Min.
600V RMS.
Certified for current interrupting at full rated current voltage.
Suitable for use on a circuit capable of delivering not more than 10,000
RMS symmetrical amperes at the voltage rating of the receptacle.
Mechanical 10,000 cycles;
Electrical 6,000 cycles.
Mechanical
Impact Resistance
Terminal Identification
Product Identification
Weight
Mounting
In accordance with UL 746C.
In accordance with UL, CSA.
Identification and ratings are part of the external label and receptacle face.
3.5 pounds.
External full adjustable feet.
Environmental
Moisture Resistance
Flammability
Operating Temperature
UV Resistance
Outdoor – 4X (Hose-Directed Water, Corrosion Resistance), IP66 suitability.
Meets UL 94V0 material classification.
Maximum continuous +75°C;
Minimum continuous -40°C.
All exposed materials are UV stabilized.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
B-73
Twist-Lock® Devices
Technical Information
Valise® Plugs and Connectors
Specifications
Plugs
Part
Material
Typical Specification - Catalog No. HBL4723VY.
Description - Straight Body Plug
Type – 2 Pole, 3 Wire, Grounding
Rating – 15 and 20A 125V, 250V, and 277V AC, 30A 125 and 250V
Certification – UL Listed File E1706, CSA Certified
IP SUITABILITY – IP20
Plug
Housing
Blades
Ground Blade
Terminal Screws
Cable Inserts
Terminal Clamps
Body Holding Screws
15, 20 and 30A
Nylon
Brass
Brass
Steel multiple drive
Polyphenylene Oxide
CR Steel
Steel multiple drive
Connector Bodies
Part
Material
Typical Specification- Catalog No. HBL4729VY
Description – Straight Body Connector
Type – 2 Pole, 3 Wire, Grounding
Rating – 15 and 20A 125V, 250V, and 277V AC, 30A 125 and 250V
Certification – UL Listed File E1706, CSA Certified
IP SUITABILITY – IP20
Connector
Housing
Contact and Ground Springs
Terminal Screws
Cable Inserts
Terminal Clamps
Body Holding Screws
15, 20 and 30A
Nylon
Brass
Steel multiple drive
Polyphenylene Oxide
CR Steel
Steel multiple drive
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V, 250V or 277V AC as rated.
Certified for full rated current.
Max. 30°C temperature rise at full rated current after 50 cycles
of overload at 150% rated DC current.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Torque
Screw Color per UL 498 (Brass, White and Green).
15A-18 to 12AWG. Solid or stranded copper wire only.
20A-18 to 10AWG. Solid or stranded copper wire only.
30A-14 to 8AWG. Solid or stranded copper wire only.
Molded rating on device face.
12 in-lb terminal screws, 7 in-lb assembly screws.
Cord Range
15A
20A
30A
.220" to .660" (5.6mm to 16.8mm).
.325" to .720" (8.26mm to 18.3mm).
.590" to .930" (15.0mm to 23.6mm).
Environmental
Flammability
Operating Temperature
UL 94HB.
Maximum continuous 75°C, minimum -40°C (w/o impact).
Standards
Listed to UL Standard UL498
Certified to CSA Standard C22.2 No. 42
B-74
®
Wiring Device-Kellems
www.hubbell-wiring.com
Section C
Watertight Devices
Index
Watertight Safety-Shroud®
Twist-Lock®
Product
Watertight
Page
Safety-Shroud®
Twist-Lock®
Devices
20A and 30A Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-2
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-4
Watertight Devices
15A and 20A, Straight Blade Devices . . . . . . . . . . . . . . . . . . . . . . . . . . .C-6
15A and 20A, Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-7
20A and 30A, Twist-Lock® Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-8
Portable Outlet Boxes, Plates and Accessories . . . . . . . . . . . . . . . . . .C-10
Heavy-Duty Portable Outlet Boxes and Plates . . . . . . . . . . . . . . . . . . .C-11
Watertight Devices
and Lift Covers
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-12
Portable Outlet Boxes
and Cover Plates
Heavy-Duty Outlet Boxes
and Cover Plates
www.hubbell-wiring.com
®
Wiring Device-Kellems
C-1
Twist-Lock® Devices
Watertight Safety-Shroud® Twist-Lock® Devices
Features and Benefits
Catalog number and color-coded
voltage rating are easily visible even
when in use
Closure cap is included for environmental seal
when device is not in use
Alignment arrows and lock and unlock
symbols provide a visual indication that
devices are properly connected
One-piece, engineered
thermoplastic housing
is impact-resistant for
heavy-duty industrial
environments
External keying
provides
quick mating
of devices
All screws are #10
multiple drive head
Cord grip screw recess
minimizes screwdriver
slippage
HBL2733SW
Blades are recessed
for protection against
bending and breaking
HBL2731SW
One-step automatic Thermoplastic
Elastomer (TPE) seal and engineered
thermoplastic guard assure sealing when
device is fully connected
Note: Works with Mechanical Interlocks, see page B-39 for additional information.
C-2
TPE Gland Seal
Assorted glands accommodate a wide range
of cord sizes from #16-3 Type SJ to #8-5
Type S, SO
Spring-Loaded Cover
One-step push-to-close spring-loaded cover
with latch allows for fast opening and closing
of lift cover. Result: environmental sealing is
assured
Panel or Box Mount Receptacles
and Inlets
• High impact, thermoplastic housing for
heavy-duty industrial environments.
• Catalog number and color-coded
voltage rating are easily visible when
in use.
• Stainless Steel 302/304, #10 multiple
drive head mounting screws provide
corrosion resistance.
• Mounting screw recesses minimize
screwdriver slippage.
• Lockout/tagout hole on inlets allow
compliance to OSHA regulation 29
CFR 1910.147.
• TPE closure cap provided with inlets
for environmental seal when not in use.
• Accepts all mating NEMA locking plugs
and most connector bodies, allowing
interchangeability with existing devices.
Safety-Shroud
• Virtually eliminates bent and broken plug
blades, leading to longer equipment life.
• Extends life of mating receptacles by
eliminating damage caused by insertion
of bent blades.
• Extra protection for personnel by
significantly reducing chance of
inadvertent contact with blades when
connecting or disconnecting energized
receptacles and connector bodies.
• Reduces exposure to arcing when
connecting or disconnecting plugs
under load.
• Compliance with California Code of
Regulations, Title 8, Article 51, subsection
2510.7(b), which requires shrouding for
devices exceeding 300 volts.
• Lockout/tagout hole allows compliance
with OSHA regulation 29 CFR 1910.147.
• Sealing gland and thermoplastic guard
assure sealing when fully connected.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Watertight Devices
Watertight Safety-Shroud® Twist-Lock® Devices
20 and 30 Ampere Devices
Watertight Devices
NEMA Rating
Color Coded by Voltage
Poles/Wires
20A 125V
20A 250V
277V AC
Connector
Flanged Inlet
Receptacle
2P/3W
HBL2311SW
HBL2313SW
HBL2315SW
HBL2310SW
L6-20
2P/3W
HBL2321SW
HBL2323SW
HBL2325SW
HBL2320SW
L7-20
2P/3W
HBL2331SW
HBL2333SW
HBL2335SW
HBL2330SW
L14-20
3P/4W
HBL2411SW
HBL2413SW
HBL2415SW
HBL2410SW
L15-20
3P/4W
HBL2421SW
HBL2423SW
HBL2425SW
HBL2420SW
L16-20
3P/4W
HBL2431SW
HBL2433SW
HBL2435SW
HBL2430SW
L21-20
4P/5W
HBL2511SW
HBL2513SW
HBL2515SW
HBL2510SW
L5-30
2P/3W
HBL2611SW
HBL2613SW
HBL2615SW
HBL2610SW
L6-30
2P/3W
HBL2621SW
HBL2623SW
HBL2625SW
HBL2620SW
L14-30
3P/4W
HBL2711SW
HBL2713SW
HBL2715SW
HBL2710SW
L15-30
3P/4W
HBL2721SW
HBL2723SW
HBL2725SW
HBL2720SW
L16-30
3P/4W
HBL2731SW
HBL2733SW
HBL2735SW
HBL2730SW
L17-30
3P/4W
HBL2741SW
HBL2743SW
HBL2745SW
HBL2740SW
L21-30
4P/5W
HBL2811SW
HBL2813SW
HBL2815SW
HBL2810SW
G
20A 125V
NEMA L5-20P
UL/CSA
X1 HP
G
Y
20A 250V
NEMA L6-20P
UL/CSA
2 HP
20A 277V AC
NEMA L7-20P
UL/CSA
X
125/250V AC
Plug
L5-20
W
W
G
Y
20A 3Ø 250V AC
20A 125/250V AC
NEMA L14-20P
UL/CSA
2 (1)X HP
Y
G
Z
20A 3Ø 480V AC
20A 3Ø 250V AC
NEMA L15-20P
UL/CSA
X
3 HP
Y
G
Z
3ØY
120/208V AC
30A 125V
20A 3Ø 480V AC
NEMA L16-20P
UL/CSA
X
5 HP
Y
G
W
Z
20A 3ØY
120/208V AC
NEMA L21-20P
UL/CSA
W
2 HP
G
30A 125V
NEMA L5-30P
UL/CSA
X2 HP
30A 250V
G
Y
30A 250V
NEMA L6-30P
UL/CSA
2 XHP
30A 125/250V AC
W
G
Y
30A 3Ø 250V AC
30A 125/250V
NEMA L14-30P
UL/CSA
2 (2)X HP
Y
G
Z
30A 3Ø 480V AC
30A 3Ø 250V AC
NEMA L15-30P
UL/CSA
X
3 HP
Y
G
Z
30A 3Ø 480V AC
NEMA L16-30P
UL/CSA
10XHP
3Ø 600V AC
G
Y
Z
3ØY
120/208V AC
30A 3Ø 600V AC
NEMA L17-30P
UL/CSA
X
Y
W
G
Z
30A 3ØY
120/208V AC
NEMA L21-30P
UL/CSA
Note: For technical information
3 HP on Watertight Safety-Shroud devices see page B-70.
Mechanical Interlock Switched Safety Enclosure
Description
Catalog Number
Unfused mechanical interlock integrates a watertight safety shroud receptacle with a linked
disconnect switch. For additional details, see page B-39.
HBLMITL
Specifications
Listings
Listed to UL Standard 498.
Certified to CSA Standard No.42.
Fed. Spec. WC-596.
HBLMITL
Environmental
Moisture Resistance
Flammability (Enclosure)
Operating Temperatures
www.hubbell-wiring.com
UL Type 4, 4X, 12, IP66 suitability.
V0 per UL94 or CSA 22.2 No. 0.17.
Maximum Continuous 75°C; Minimum -40°C (w/o impact).
®
Wiring Device-Kellems
C-3
Watertight Devices
Safety-Shroud® Twist-Lock® Accessories
E
15° Angle Non-Metallic Back Box
A
NPT
Hub
Size
F
C
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets.
15°
B
1"
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
5.67" 4.44" 4.05" 3.91" 2.35" 4.92"
(144.0) (112.8) (102.9) (99.3) (59.7) (125.0)
Cubic Inch
Capacity Catalog Number
30.00" BB2030N
Note: Hub is not included; order Raco part number 1704. This box meets IP67 requirement and Type 4X requirements when
installed with a watertight conduit hub.
D
Non-Metallic Angle Box
E
15° Angle Metallic Back Boxes
C
A
NPT
Hub
Size
F
For 20A and 30A Watertight ¾"
Safety-Shroud Twist-Lock
Receptacles and Inlets.
1"
15°
B
D
Metallic Angle Box
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic Inch
Capacity Catalog Number
5.13" 4.00" 4.19" 3.75" 3.00" 4.00"
(130.2) (101.6) (106.4) (95.3) (76.2) (101.6)
30.00" BB201W
5.13" 4.00" 4.19" 3.75" 3.00" 4.00"
(130.2) (101.6) (106.4) (95.3) (76.2) (101.6)
30.00" BB301W
E
Metallic Feed Thru Back Boxes
C
A
NPT
Hub
Size
48 CU. IN.
F
B
For 20A and 30A Watertight ¾"
Safety-Shroud Twist-Lock
Receptacles and Inlets.
1"
D
Metallic Feed Thru Box
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic Inch
Capacity Catalog Number
8.25" 3.06" 7.14" 4.50" 3.75" 3.13"
(209.6) (77.8) (181.4) (114.3) (95.3) (79.5)
48.00" FT202W
8.25" 3.06" 7.14" 4.50" 3.75" 3.13"
(209.6) (77.8) (181.4) (114.3) (95.3) (79.5)
48.00" FT302W
Note: These boxes are cast aluminum and are finished with enamel paint. These boxes withstand a 500-hour salt spray test
as well as UL raintight and external icing tests. NPT (metric designator).
D
E
C
A
Inch
(mm)
55° Angle Metallic Adapter and Back Box
A
NPT
Hub
Size
B
55°
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets
AB203055
D
E
B
1"
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
6.80" 5.63" 6.60" 4.50" 3.74"
(172.4) (142.9) (167.0) (114.3) (95.0)
F
Inch
(mm)
-
Cubic Inch
Capacity Catalog Number
45.27" AB203055
55° Angle Metallic Adapter with Grounding Lug
C
55°
A
A
Inch
(mm)
Description
AA203055
For 20A and 30A Watertight
Safety-Shroud Twist-Lock
Receptacles and Inlets
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
4.89" 3.33" 4.29" 3.75" 2.50"
(172.4) (167.0) (142.9) (114.3) (95.0)
F
Inch
(mm)
-
Cubic Inch
Capacity Catalog Number
25.00" AA203055
Straight Watertight Wall Box Adapter
HBL2030AP
Description
Catalog Number
Adapts 20A and 30A Watertight Safety-Shroud Twist-Lock receptacles and inlets
to 2-gang, device mount, FD boxes.
HBL2030AP
Non-Watertight Angle Wall Box Adapter
Description
Catalog Number
Adapts 20A and 30A Watertight Safety-Shroud Twist-Lock receptacles to 1- or
2-gang standard wall boxes (4" or 4¹¹⁄₁₆" square).
AA2030PS
AA2030PS
Dimensions in Inches (mm)
C-4
®
Wiring Device-Kellems
www.hubbell-wiring.com
Watertight Devices
Watertight Devices
Features and Benefits
Steel/chromate
terminal screws
Stainless steel
assembly screws
Color coded thermoplastic elastomer
bushings available for entire cord range
Clear, deep pocket
wire entry
Impact resistant Valox®
compression nut
25W49H
Thermoplastic elastomer
sealing cap with triple seal
Impact resistant
Valox® body
Impact resistant Valox®
lid and cover plate and
receptacle body
Stainless steel
hinge spring and pin
Polypropylene internal
shell and ferrule
UV resistant thermoplastic
elastomer body with easy grip ribs
Thermoplastic
elastomer seal
Valox® compression nut
Fully thermoplastic
elastomer housing
69W76H
Stainless steel
mounting plate
Stainless steel
hardware
3056H
3099H
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
C-5
Watertight Devices
15 and 20 Ampere, Straight Blade Devices
2P 3W
IP65, 66, 67
G
2P 3W
3P 3W
G
W
SUITABILITY
15A 125V
NEMA 5-15P
UL CSA
15A Straight Blade Plugs
Description
Color
Cord Dia.
Catalog Number
Thermoplastic elastomer
plugs.
Yellow
Black
.300"-.625"
(7.6-15.9)
14W47H
14W47HBK
14W33H
2P 3W
15A 250V
NEMA 6-15P
UL CSA
14W49H
—
2P 3W
15A 125V
10A 600V
NON-NEMA
14W07H
—
3P 3W
G
15A Straight Blade
Connectors/Receptacles*
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
15A 250V
NEMA 6-15R
UL CSA
1.5 HP
15A 125V
10A 600V
NON-NEMA
Description
Color
Cord Dia.
Catalog Number
Thermoplastic elastomer
connectors.
Yellow
Black
.300"-.625"
(7.6-15.9)
15W47H
15W47HBK
15W49H
—
15W07H
—
Thermoplastic elastomer
receptacles.
Yellow
—
60W47H
60W49H
—
15W47H
IP65, 66, 67
SUITABILITY
2P 3W
2P 3W
G
G
W
20A 125V
NEMA 5-20P
UL CSA
20A Straight Blade Plugs
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow plugs.
.300"-.625"
(7.6-15.9)
14W33H
2P 3W
20A 250V
NEMA 6-20P
UL CSA
14W48H
—
2P 3W
G
60W47H
20A Straight Blade
Connectors/Receptacles*
20A 125V
NEMA 5-20R
UL CSA
1 HP
20A 250V
NEMA 6-20R
UL CSA
2 HP
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow connectors.
.300"-.625"
(7.6-15.9)
15W33H•
15W48H•
—
Thermoplastic elastomer
yellow receptacles.
—
60W33H
60W48H
—
Note: *Receptacles are NEMA 3R, IP44 suitability.
Horsepower ratings for receptacle/plug connection are AC voltage only.
CSA certified only.
•UL listed only.
C-6
®
Wiring Device-Kellems
www.hubbell-wiring.com
Watertight Devices
15 and 20 Ampere, Twist-Lock® Devices
2P 3W
IP65, 66, 67
W
2P 3W
G
15A
G
G
SUITABILITY
Twist-Lock®
2P 3W
W
X
Y
15A 125V
NEMA L5-15P
UL/CSA
Plugs
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow plugs.
.300"-.625"
(7.6-15.9)
24W47H
15A 250V
NEMA L6-15P
UL/CSA
15A 277V AC
NEMA L7-15P
UL/CSA
24W49H
24W34H
2P 3W
2P 3W
W
G
2P 3W
X
G
G
24W49H
W
Y
15A Twist-Lock®
Connectors/Receptacles*
15A 125V
NEMA L5-15R
UL/CSA
1 HP
15A 250V
NEMA L6-15R
UL/CSA
1.5 HP
15A 277V AC
NEMA L7-15R
UL/CSA
2 HP
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow connectors.
.300"-.625"
(7.6-15.9)
25W47H
25W49H
25W34H
Thermoplastic elastomer
yellow receptacles.
—
65W47H
65W49H
65W34H
25W49H
IP65, 66, 67
2P 3W
2P 3W
W
X
G
2P 3W
G
SUITABILITY
Y
20A 125V
NEMA L5-20P
UL/CSA
20A Twist-Lock® Plugs
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow plugs.
.475"-.720"
(12.1-19.2)
26W47H
20A 250V
NEMA L6-20P
UL/CSA
20A 277V AC
NEMA L7-20P
UL/CSA
26W48H
26W49H
2P 3W
2P 3W
W
X
G
2P 3W
65W49H
G
Y
20A Twist-Lock®
Connectors/Receptacles*
20A 125V
NEMA L5-20R
UL/CSA
1 HP
20A 250V
NEMA L6-20R
UL/CSA
2 HP
20A 277V AC
NEMA L7-20R
UL/CSA
2 HP
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow connectors.
.475"-.720"
(12.1-19.2)
27W47H
27W48H
27W49H
Thermoplastic elastomer
yellow receptacles.
—
67W47H
67W48H
67W49H
Note: *Receptacles are NEMA 3R, IP44 suitability.
Horsepower ratings for receptacle/plug connection are AC voltage only.
www.hubbell-wiring.com
®
Wiring Device-Kellems
C-7
Watertight Devices
20 and 30 Ampere, Twist-Lock® Devices
SUITABILITY
20A
3P 4W
X
X
W
IP65, 66, 67
Twist-Lock®
3P 4W
Plugs
G
X
Y
G
Y
G
Y
Z
Z
20A 125/250V AC
NEMA L14-20P
UL/CSA
2 (1) HP
20A 3Ø 250V AC
NEMA L15-20P
UL/CSA
3 HP
20A 3Ø 480V AC
NEMA L16-20P
UL/CSA
5 HP
Description
Color
Cord Dia.
Catalog Number
Thermoplastic
elastomer plugs.
Yellow
Black
.560"-.775"
(14.2-19.9)
26W74H
—
28W48H
26W75H
26W75HBK
3P 4W
3P 4W
X
X
G
20A Twist-Lock®
Connectors/Receptacles*
3P 4W
W
26W76H
26W76HBK
3P 4W
X
G
Y
G
Y
Y
Z
Z
20A 125/250V
NEMA L14-20R
UL/CSA
2 (1) HP
20A 3Ø 250V AC
NEMA L15-20R
UL/CSA
3 HP
20A 3Ø 480V AC
NEMA L16-20R
UL/CSA
5 HP
Description
Color
Cord Dia.
Catalog Number
Thermoplastic
elastomer connectors.
Yellow
Black
.560"-.775"
(14.2-19.9)
27W74H
—
27W75H
27W75HBK
27W76H
27W76HBK
Thermoplastic
elastomer receptacles.
Yellow
—
67W74H
67W75H
67W76H
4P 4W
3P 3W
29W48H
W
Y
IP65, 66, 67
Z
X
W
SUITABILITY
Non-NEMA
20A Twist-Lock® Plugs
Y
X
20A 125/250V
Non-NEMA
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow plugs.
.475"-.720"
(12.1-19.2)
26W08H
20A 3Ø Y
120/208V AC
Non-NEMA
26W09H
4P 4W
3P 3W
W
Y
Non-NEMA
20A Twist-Lock®
Connectors/Receptacles*
69W48H
Z
X
W
Y
X
20A 125/250V
Non-NEMA
20A 3Ø Y
120/208V AC
Non-NEMA
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow connectors.
.475"-.720"
(12.1-19.2)
27W08H
27W09H
Thermoplastic elastomer
yellow receptacles.
—
67W08H
67W09H
2P 3W
2P 3W
W
X
IP65, 66, 67
G
2P 3W
G
Y
SUITABILITY
30A 125V
NEMA L5-30P
UL/CSA
2 HP
30A Twist-Lock® Plugs
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow plugs.
.475"-.720"
(12.1-19.2)
28W47H
30A 250V
NEMA L6-30P
UL/CSA
2 HP
28W48H
2P 3W
2P 3W
W
X
G
G
30A 277V AC
NEMA L7-30P
UL/CSA
3 HP
28W49H
2P 3W
W
G
Y
30A Twist-Lock®
Connectors/Receptacles*
30A 125V
NEMA L5-30R
UL/CSA
2 HP
30A 250V
NEMA L6-30R
UL/CSA
2 HP
30A 277V AC
NEMA L7-30R
UL/CSA
3 HP
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow connectors.
.475"-.720"
(12.1-19.2)
29W47H
29W48H
29W49H
Thermoplastic elastomer
yellow receptacles.
—
69W47H
69W48H
69W49H
Note: *Receptacles are NEMA 3R, IP44 suitability.
C-8
®
Wiring Device-Kellems
www.hubbell-wiring.com
Watertight Devices
30 Ampere, Twist-Lock® Devices
IP65, 66, 67
3P 4W
3P 4W
X
X
W
G
30A
Plugs
X
Y
Y
G
G
Y
Z
Z
30A 125/250V
NEMA L14-30P
UL/CSA
2 (2) HP
30A 3Ø 250V AC
NEMA L15-30P
UL/CSA
3 HP
30A 3Ø 480V AC
NEMA L16-30P
UL/CSA
10 HP
SUITABILITY
Twist-Lock®
3P 4W
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow plugs.
.640"-.930"
(16.3-23.6)
28W74H
28W75H
28W76H
3P 4W
3P 4W
3P 4W
X
X
G
30A Twist-Lock®
Connectors/Receptacles*
W
X
Y
G
G
Y
Y
Z
Z
30A 125/250V
NEMA L14-30R
UL/CSA
2 (2) HP
30A 3Ø 250V AC
NEMA L15-30R
UL/CSA
3 HP
30A 3Ø 480V AC
NEMA L16-30R
UL/CSA
10 HP
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow connectors.
.640"-.930"
(16.3-23.6)
29W74H
29W75H
29W76H
69W74H
69W75H
69W76H
Thermoplastic elastomer
yellow receptacles.
—
3P 4W
4P 4W
X
X
IP65, 66, 67
SUITABILITY
30A Twist-Lock® Plugs
G
Y
Y
29W76H
W
Z
Z
30A 3Ø 600V AC
NEMA L17-30P
UL/CSA
30A 3ØY
120/208V AC
NEMA L18-30P
UL Listed
3 HP
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow plugs.
.640"-.930"
(16.3-23.6)
28W77H
28W78H
3P 4W
4P 4W
X
X
G
30A Twist-Lock®
Connectors/Receptacles*
Y
Y
W
Z
Z
30A 3Ø 600V AC
NEMA L17-30R
UL/CSA
30A 3ØY
120/208V AC
NEMA L18-30R
UL Listed
3 HP
Description
Cord Dia.
Catalog Number
Thermoplastic elastomer
yellow connectors.
.640"-.930"
(16.3-23.6)
29W77H
29W78H
69W77H
—
Thermoplastic elastomer
yellow receptacles.
—
69W76H
4P
4P 4W
4W
3P
3P 3W
3W
IP65, 66, 67
Z
W
Y
Y
W
SUITABILITY
Non-NEMA
30A Twist-Lock® Plugs
X
X
30A 125/250V
Non-NEMA
Not UL Listed
30A 3Ø Y
120/208V AC
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Cord Dia.
Thermoplastic elastomer
yellow plugs.
.475"-.720"
(12.1-19.2)
28W08H
.640"-.930"
(16.3-23.6)
Catalog Number
28W09H•
4P
4P 4W
4W
3P
3P 3W
3W
Z
W
Y
Y
Non-NEMA
30A Twist-Lock®
Connectors/Receptacles*
28W76H
W
X
X
30A 125/250V
Non-NEMA
Not UL Listed
30A 3Ø Y
120/208V AC
Non-NEMA
Not UL Listed
Description
Cord Dia.
Catalog Number
Cord Dia.
Thermoplastic elastomer
yellow connectors.
.475"-.720"
(12.1-19.2)
29W08H•
.640"-.930"
(16.3-23.6)
Thermoplastic elastomer
yellow receptacles.
—
69W08H•
Catalog Number
29W09H•
—
—
Note: *Receptacles are NEMA 3R, IP44 suitability.
•UL listed only.
www.hubbell-wiring.com
®
Wiring Device-Kellems
C-9
Watertight Devices
Weather Protective Lift Covers, Portable Outlet Boxes and Plates
NEMA Type 3R Weather Protective Lift Covers**
6700H
Description
Catalog Number
Lift cover assembly; for use with 15A or 20A straight blade receptacles
and 15A locking receptacle; receptacle not included.
6500H
Lift cover assembly; for use with locking 20A receptacles;
receptacle not included.
6700H
Lift cover assembly; for use with locking 30A receptacles*;
receptacle not included.
6800H
Note: *When mating with 28W08H plug, use 6700H.
**For use with FS/FD boxes.
NEMA Type 1 Portable Outlet Box
Description
Catalog Number
Portable outlet box.
3059H
Portable outlet box; deep.
3099H
Portable outlet box with feed thru.
3090FH
Portable outlet box with (2) duplex cover plates.
3000H
Note: For use with NEMA Type 1 portable outlet box covers listed below.
NEMA Type 1 Portable Outlet Box Cover Plates
3059H
Description
Catalog Number
Outlet box lift cover, duplex receptacle.
3056H
Outlet box cover, duplex receptacle.
3051H
Outlet box lift cover, 1.39" diameter receptacle.
3057H
Outlet box cover, 1.39" diameter receptacle.
3052H
Outlet box lift cover, 1.572" diameter receptacle.
3058H
Outlet box cover, 1.572" diameter receptacle.
3055H
Outlet box lift cover; GFCI.
3061H
Outlet box cover; GFCI.
3060H
Outlet box cover plate, blank.
3054H
3099H
3056H
3057H
3058H
3061H
3051H
3052H
3055H
3060H
3090FH
3054H
Dimensions
Portable Outlet Boxes
4.20 (106.0)
Deep Box
3.20 (80.0)
Standard
5.30
(134.0)
4.60
(118.0)
3000H
4.00
(102.0)
2.50
(64.0)
14.5 CU-IN
(Standard)
17 CU-IN
(Deep Box)
3.64
(92.4)
Dimensions in Inches (mm)
C-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
Watertight Devices
Heavy-Duty Portable Outlet Boxes and Plates
Heavy-Duty Portable Outlet Boxes and Cover Plates
Description
Catalog Number
Box with cord strain relief, with one blank cover plate.
Box with cord strain relief, with one blank cover plate, black.
Box with cord strain relief, with two duplex (indoor) cover plates.
Box with cord strain relief, with two duplex (indoor), yellow cover plates.
Blank, non-metallic FS cover plate with foam gasket, gray.
Duplex, non-metallic FS cover plate, gray.
Duplex, non-metallic FS cover plate, yellow.
Single receptacle (1.39"), non-metallic FS cover plate, gray.
Single receptacle (1.56"), non-metallic FS cover plate, gray.
Rectangular opening, non-metallic FS cover plate, gray.
HBLPOB1
HBLPOB1BK
HBLPOB1D
HBLPOB1DY
HBLP14FS
HBLP8FS
HBLP8FSY
HBLP7FS
HBLP720FS
HBLP26FS
HBLPOB1
Other Cover Plates and Devices
which may be used with Heavy-Duty Portable Outlet Boxes
Description
Catalog Number
Duplex cover plate, weatherproof.
Single receptacle (1.39") cover plate, weatherproof.
Single receptacle (1.56") cover plate, weatherproof.
Safety-Shroud Twist-Lock® surface receptacles.
HBL5221, HBL52CM21
HBL7423WO, HBL74CM23WO
HBL7425WOA, HBL74CM25WOA
HBL2310SR, HBL2320SR, HBL2330SR,
HBL2610SR, HBL2620SR
Note: Standard product gray, CM yellow.
Deluxe Cord Grips Straight Male Thread
Cover Plates
Nylon Fittings, Stainless Steel Mesh, Liquidtight, for Insulated Cables
Grip Diameter Range
Inches
(cm.)
Thread Size
NPT (inches)
Form
Size
Catalog Number
.375"-.500" (.95-1.27)
.500"-.625" (1.27-1.59)
.625"-.750" (1.59-1.90)
¾"
¾"
¾"
F3
F3
F3
074011335
074011336
074011337
Nylon Cord Connector Straight Male Thread
Grip Diameter Range
Inches
(cm.)
Thread Size
NPT (inches)
Form
Size
Catalog Number
.375"-.500" (.95-1.27)
.500"-.625" (1.27-1.59)
.625"-.750" (1.59-1.90)
¾"
¾"
¾"
F3
F3
F3
SHC1035CR
SHC1036CR
SHC1037CR
Specifications for Heavy-Duty Portable Outlet Boxes and Cover Plates
UL Listed
CSA Certified
UL 514C, UL467 and UL50 Enclosures Types 1, 3R.
C22.2 No. 18 and C22.2 No. 94 Enclosures Types 1, 3R and
C22.2 No. 0.4 (Impedance).
Box Specifications:
Moisture Resistance
Flammability
Operating Temperature
UV Resistance
Impact and Crush Resistance
Material
Cord Connector Materials
Cord Diameter Range
Bonding Strap Material
Threaded Inserts
Grounding Screw Material
Indoor Cover Plate Screws Material
Outdoor Cover Plate Screws Material
Cover Plate Gasket Material
Wet and damp locations, Enclosure Type 3R when used with weatherproof
cover plates. Dry, indoors locations, Enclosure Type 1 with all other cover plates.
UL 94V-0, 94-5VA classification.
80°C maximum; -35°C minimum.
All materials are UV stabilized.
in accordance with UL 514C, UL50, C22.2 No. 18 and C22.2 No. 94.
Valox®.
Nylon nut; Nylon Gotcha® ring; Neoprene grommet.
.38" to .75" diameter.
Brass.
Brass.
Brass.
Zinc Plated Steel.
Stainless Steel.
UL recognized closed-cell foam (aging and oil resistant).
Deluxe Cord Grips
(purchased separately)
Gray Nylon
Cord Connector
Dimensions
3.18"
(80.8)
4.82"
(122.4)
2.84"
(72.1)
32 CU-IN
4.20"
(106.7)
4.56"
(115.8)
5.38" (136.7)
HBLPOB1
Dimensions in Inches (mm)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
C-11
Watertight Devices
Technical Information
Specifications
Listings (Plug/Connector and Flip Lid Assembly)
Listed to UL498.
Certified to CSA C22.2 No. 42.
Meets NEMA WD-1, WD-6 and ANSI standards.
Materials
Performance
Electrical
Plug/Connector
Part
Materials
Blade/Contact Carrier
Terminal Retainer
Housing
Housing Insert
Strain Relief Nut
Grommet
Ferrule
Blades/Contacts
Terminal Screws
Terminal Screw Size
Body Holding Screws
Drive Screws
PBT Thermoplastic, yellow
Polycarbonate, clear
Thermoplastic Elastomer, yellow
Polypropylene, natural
PBT Thermoplastic, gray
Thermoplastic Elastomer, various colors
Polypropylene, natural
Brass, nickel
Steel, chromate
#8-32
Stainless steel
Steel, chromate
Dielectric Voltage
Connectors:
Plugs:
Max Working Voltage
Current Interrupting
Temperature Rise
Mechanical
Cord and terminal accommodations:
Plugs and Connectors
15 and 20A straight blade
and 15A locking
20 and 30A 3-wire locking
Types S, SO, ST, SJ, SJO, SJT 18/3 to 12/3,
.300 min. to .625 in. max (7.6 to 15.9 mm) dia.
12/3 SJ, 14/3 S to 10/3 S (.475" to .720")
(12.1 mm to 19.2 mm)
20A 4-wire locking
14/4 S to 10/4 S (.560" to .775")
(14.2 mm to 19.9 mm)
30A 4-wire locking
12/4 S to 8/4 S, 6/4 MSHA (.640" to .930")
(16.3 mm to 23.6 mm)
Receptacles – use solid or stranded building wire or flexible cord only
as outlined below:
All 15 and 20A straight blade 18 AWG to 12 AWG
20A locking and 30A 3-wire 14 AWG to 10 AWG
30A 4-wire
12 AWG to 6 AWG
Flip Lid Assembly (see connector for device materials)
Part
Materials
Flip lid and cover plate
Sealing Collar
Mounting Plate
Spring
Hinge Pin
Mounting Screws
PBT Thermoplastic, yellow
Thermoplastic elastomer, yellow
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Portable Outlet box and Accessories
Part
Materials
Box Enclosure
Strain Relief Nut
Grommet
Ferrule
Strain relief insert
Locknut
Threaded inserts
Strain relief wire
Duplex receptacle screw
Cover plate screws
Cover Plate
Flip covers
Flip cover seal
Cover plate Spring
Hinge Pin
Hinge bracket
Rivets
Thermoplastic Elastomer, yellow
PBT Thermoplastic, gray
Thermoplastic Elastomer, various colors
Polypropylene, natural
Nylon, yellow
Steel, zinc plate
Polypropylene, natural
Brass
Stainless steel
Steel, black oxide
Nylon, gray
PBT Thermoplastic, yellow
Foam rubber, black
Stainless steel
Aluminum
Stainless steel
Brass
2000V AC if rated 300V or less
3000V AC if rated above 300V
2500V AC if rated 300V or less
3500V AC if rated above 300V
As marked
Rated for current interruption per UL498
30°C max per UL498 at rated current
Portable Outlet Boxes
All
Wiring Volume
16/3 SO through 12/3 SO cord
Standard - 14.5 cu. in.
Deep - 17 cu. in.
Environmental
Moisture Resistance
Flammability
Operating temperatures
UV resistance
NEMA 4, 4X, 12, 6, 6P
(Plug and Connector only)
NEMA 3R (Flip lid assemblies)
NEMA TYPE 1 (Portable Outlet Box)
UL94V0 (boxes and wiring device interiors)
UL94V2 (cover plates)
UL94HB (wiring device housings, flip lid seals)
-40°C (without impact) to +60°C continuous
All exposed materials are UV stabilized
Dimensions
Watertight Plugs and Connectors
Straight Blade and 15A Locking
Locking
1.32
(33.5)
2.3
(58.0)
20A
2.5
(64.0)
30A
1.63
(41.4)
2.68
(68.0)
Receptacles with Lift Cover
and Cover Assemblies
3.1
(79.0)
3.25
(82.6)
2.5
(64.0)
2.8 20A
(70.0)
30A
1.8
(46)
0.90
(23.0)
1.88
(47.8)
4.0
(102.0)
4.9
(124.0)
4.20
(106.6)
3.14
(79.8)
Dimensions in Inches (mm)
C-12
®
Wiring Device-Kellems
www.hubbell-wiring.com
Section D
Switches
Index
SNAPConnect® Switches
Product
SNAPConnect®
Page
Toggle and Decorator Series
SNAPConnect® Toggle Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-4
SNAPConnect® Decorator Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-5
HBL® Extra Heavy Duty Industrial Grade
Toggle and Locking Type Switches with Ground Screw . . . . . . . . . . . . . D-6
Toggle Type Illuminated and Pilot Light Switches with Ground Screw . . . D-7
3-Position, 2-Circuit Center Off Switches . . . . . . . . . . . . . . . . . . . . . . . . . D-7
Hubbell-PRO Heavy Duty Industrial Series
Toggle Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-8
Toggle Switches
Pre-Wired/Leaded Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-8
Hospital Call Switch with Lanyard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-8
Pre-Wired/Leaded Commercial Toggle and Decorator Switches . . . . . . . D-9
Specification Grade Commercial Switches . . . . . . . . . . . . . . . . . . . . . . . . D-10
Style Line® Decorator Series Specification Grade . . . . . . . . . . . . . . . . . . D-11
Extra Heavy Duty Industrial 347V AC Toggle and PresSwitch® . . . . . . . . D-12
Switch Accessories
Pilot Light, SWITCHOUT® Lockout Device and
Weatherproof Switch Plates for Toggle Switches . . . . . . . . . . . . . . . . . . D-13
Switch Certification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-14
Pre-Wired/Leaded Switches
Nylon and Metal Wallplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-15
Dimmers
Slide and Rotary Control Dimmers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-16
Dimmer Ganging and Derating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-17
Heavy Duty Panel Mount and Bat Handle Switches . . . . . . . . . . . . . . . . . D-18
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-20
PresSwitch® and
Panel Mount Switches
www.hubbell-wiring.com
®
Wiring Device-Kellems
D-1
Switches
SNAPConnect® Toggle and Decorator Series
Features and Benefits
Steel, zinc plated
bridge is corrosion
resistant
Installation ease,
automatic self-grounding
staple assures continuity
to wall box
Installation ease, automatic
self-grounding staple assures
continuity to wall box
Termination method uses a SNAPIn Connector. Wiring the connector
into the wall box can be done prior
to trim out. Changing or replacing
switches is also a "SNAP"
Large silver alloy contacts reduce
contact erosion providing long life
Pilot and Illuminated
versions use LEDs
for longer life
SNAP1221ILB
Thread cleaning captive
mounting screw
Thread cleaning
captive mounting
screw
Steel, zinc plated bridge
is corrosion resistant
SNAP2101BK
Many of these products are Assembled in USA, as indicated, and many are Buy American Compliant.
Please contact Hubbell with any certification requirements.
3 Wire Connector
for Single Pole and
Single Pole Illuminated
4 Wire Connector
for Single Pole Pilot
Light Switch
SNAPSP1NA
SNAPSP2NA
D-2
SNAPSPP1NA
SNAPSPP2NA
®
Wiring Device-Kellems
4 Wire Connector
for Three Way and
Three Way Illuminated
SNAP3W1NA
SNAP3W2NA
www.hubbell-wiring.com
Switches
HBL® Extra Heavy Duty Industrial Grade
Features and Benefits
Thread cleaning captive
mounting screw
Steel, nickel plated bridge is corrosion
resistant
Strip gauge for accurate wiring
Prominent amperage marking allows
easy identification of rating
Large silver alloy contacts reduce
contact erosion providing long life
Abuse resistant nylon toggle
Back wire entrance points for
terminations accept two wires
for feed through capability
avoiding pigtailing
One piece rivetless copper alloy spring
contact arm and terminal plate assures
proper contact alignment providing
long life
One piece bridge with integral
grounding terminal with #8 brass
screw provides a low resistance
ground path
Large brass binding head screws
with deep slots secure wire
connections
Color coded base identifies
amperage when terminating
connections, 15A (Blue), 20A
(Red), and 30A (Green)
Stainless steel automatic grounding
clip assures grounding continuity
between mounting strap and
metal wall box
HBL1221I
One piece rivetless copper alloy spring
contact arm and terminal plate assures
proper contact alignment reducing heat
rise. Large silver alloy contacts reduce
contact erosion and prevent welding,
providing long life.
Elastomer rocker assures quiet operation
and precise timing. Permanently lubricated
assembly provides long life and trouble
free operation.
Heavy duty nylon toggle resists abuse
and chemical attack making it suitable
for use in the toughest environments.
One piece integral grounding terminal
with #8 brass screw allows compliance
to NEC®. Stainless steel automatic selfgrounding clip assures grounding continuity
between mounting strap and metal wall box.
Steel nickel plated mounting strap provides
a corrosion resistant finish.
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
www.hubbell-wiring.com
®
Wiring Device-Kellems
D-3
Switches
15 and 20 Ampere, 120-277 Volts AC
SNAPConnect® Heavy Duty Toggle Switches
.88"
(22.4)
1.74"
(44.1)
2.38"
(60.3)
SNAPConnect® Specification Grade Toggle Series, Assembled in USA
15A, 120-277V AC
Description
Toggle Color
Single Pole
SNAPConnect®
Black
Brown
Gray
Ivory
Lt. Almond
Red
White
SNAP1201BKNA
SNAP1201BRNA
SNAP1201GYNA
SNAP1201INA
SNAP1201LANA
SNAP1201RNA
SNAP1201WNA
Toggle.
4.18"
(106.2)
#6-32 TAP
Double Pole
—
—
—
—
—
—
—
Three Way
SNAP1203BKNA
SNAP1203BRNA
SNAP1203GYNA
SNAP1203INA
SNAP1203LANA
SNAP1203RNA
SNAP1203WNA
Four Way
—
—
—
—
—
—
—
20A, 120-277V AC
1.30"
(33.0)
SNAP1201INA
Description
Toggle Color
Single Pole
SNAPConnect®
Toggle.
Black
Brown
Gray
Ivory
Lt. Almond
Red
White
SNAP1221BKNA
SNAP1221BRNA
SNAP1221GYNA
SNAP1221INA
SNAP1221LANA
SNAP1221RNA
SNAP1221WNA
.88"
(22.4)
1.74"
(44.1)
2.38"
(60.3)
4.18"
(106.2)
#6-32 TAP
1.30"
(33.0)
SNAP1221BKNA
1.74"
(44.1)
2.48"
(63.0)
Ø .19" (4.7)
1.20"
(30.6)
SNAPSWJUMP
Double Pole
—
—
—
—
—
—
—
Three Way
SNAP1223BKNA
SNAP1223BRNA
SNAP1223GYNA
SNAP1223INA
SNAP1223LANA
SNAP1223RNA
SNAP1223WNA
Four Way
—
—
—
—
—
—
—
Illuminated, Light On with Load Off
15A, 120-277V AC
Description
Toggle Color
Single Pole
Illuminated, Light On
with Load Off,
Toggle, Blue LED.
Black
Ivory
Red
White
SNAP1201ILBKNA
SNAP1201ILINA
SNAP1201ILRNA
SNAP1201ILWNA
Double Pole
—
—
—
—
Three Way
SNAP1203ILBKNA
SNAP1203ILINA
SNAP1203ILRNA
SNAP1203ILWNA
Four Way
—
—
—
—
20A, 120-277V AC
Description
Toggle Color
Single Pole
Double Pole
Illuminated, Light On
with Load Off,
Toggle, Blue LED.
Black
Ivory
Red
White
SNAP1221ILBKNA
SNAP1221ILINA
SNAP1221ILRNA
SNAP1221ILWNA
—
—
—
—
Three Way
SNAP1223ILBKNA
SNAP1223ILINA
SNAP1223ILRNA
SNAP1223ILWNA
Four Way
—
—
—
—
Pilot, Light On with Load On
15A, 120-277V AC
Description
Toggle Color
Single Pole
Pilot, Light On
with Load On,
Toggle, Red LED.
Black
Ivory
Red
White
SNAP1201PLBKNA
SNAP1201PLINA
SNAP1201PLRNA
SNAP1201PLWNA
Double Pole
Three Way
—
—
—
—
—
—
—
—
Double Pole
Three Way
—
—
—
—
—
—
—
—
Four Way
—
—
—
—
20A, 120-277V AC
SNAPSPP1NA
SNAP3W1NA
HP Conversion Chart
120V
.5HP
1HP
Toggle Color
Single Pole
Pilot, Light On
with Load On,
Toggle, Red LED.
Black
Ivory
Red
White
SNAP1221PLBKNA
SNAP1221PLINA
SNAP1221PLRNA
SNAP1221PLWNA
Four Way
—
—
—
—
Jumper/Tester
SNAPSP1NA
15A
20A
Description
208V 240V
1.5HP 2HP
2HP
2HP
277V AC
2HP
2HP
Description
Catalog Number
Jumper/Tester for Single Pole Circuits, Black Toggle, Blue LED Indicator.
SNAPSWJUMP
Jumper/Tester for Three Way Circuits, Black Toggle, Blue LED Indicator.
SNAP3WJUMP
SNAPConnect® Switch Pigtailed Connector, Assembled in USA
Description
Single Pole (3 Wires)
Single Pole with Pilot
3 Way (4 Wires)
Clear right angle terminal, 6 inch leads, solid wire.
SNAPSP1NA
SNAPSPP1NA
SNAP3W1NA
Clear right angle terminal, 6 inch leads, stranded wire.
SNAPSP2NA
SNAPSPP2NA
SNAP3W2NA
Note: See page D-13 for accessories.
See page D-15 for wallplates.
See page D-20 for technical information.
Many of these products are Assembled in USA, as indicated, and many are Buy
American Compliant. Please contact Hubbell with any certification requirements.
Dimensions in Inches (mm)
D-4
®
Wiring Device-Kellems
www.hubbell-wiring.com
Switches
15 and 20 Ampere, 120-277 Volts AC
SNAPConnect® Heavy Duty Style Line® Decorator Switches
#6-32 TAP
SNAPConnect® Spec. Grade Style Line® Decorator Series, Assembled in USA
15A, 120-277V AC
Description
Toggle Color
Single Pole
SNAPConnect®
Black
Brown
Gray
Ivory
Lt. Almond
Red
White
SNAP2101BKNA
SNAP2101BRNA
SNAP2101GYNA
SNAP2101INA
SNAP2101LANA
SNAP2101RNA
SNAP2101WNA
Rocker.
Double Pole
—
—
—
—
—
—
—
Three Way
Self Grounding
Clip
Four Way
SNAP2103BKNA
SNAP2103BRNA
SNAP2103GYNA
SNAP2103INA
SNAP2103LANA
SNAP2103RNA
SNAP2103WNA
—
—
—
—
—
—
—
4.28"
(108.6)
3.28"
(83.3)
1.11" (28.2)
20A, 120-277V AC
Description
Toggle Color
Single Pole
SNAPConnect®
Rocker.
Black
Brown
Gray
Ivory
Lt. Almond
Red
White
SNAP2121BKNA
SNAP2121BRNA
SNAP2121GYNA
SNAP2121INA
SNAP2121LANA
SNAP2121RNA
SNAP2121WNA
Double Pole
—
—
—
—
—
—
—
Three Way
1.44"
(30.5)
Four Way
SNAP2123BKNA
SNAP2123BRNA
SNAP2123GYNA
SNAP2123INA
SNAP2123LANA
SNAP2123RNA
SNAP2123WNA
2.78"
(70.6)
SNAP2101INA
—
—
—
—
—
—
—
#6-32 TAP
Self Grounding
Clip
4.28"
(108.6)
3.28"
(83.3)
Illuminated, Light On with Load Off
15A, 120-277V AC
Description
Toggle Color
Single Pole
Illuminated, Light On
with Load Off,
Rocker, Blue LED.
Black
Ivory
Red
White
SNAP2101ILBKNA
SNAP2101ILINA
SNAP2101ILRNA
SNAP2101ILWNA
Double Pole
—
—
—
Three Way
2.78"
(70.6)
Four Way
SNAP2103ILBKNA
SNAP2103ILINA
SNAP2103ILRNA
SNAP2103ILWNA
—
—
—
1.11"
(28.2)
1.44"
(30.5)
20A, 120-277V AC
SNAP2121ILINA
Description
Toggle Color
Single Pole
Double Pole
Illuminated, Light On
with Load Off,
Rocker, Blue LED.
Black
Ivory
Red
White
SNAP2121ILBKNA
SNAP2121ILINA
SNAP2121ILRNA
SNAP2121ILWNA
—
—
—
Three Way
Four Way
SNAP2123ILBKNA
SNAP2123ILINA
SNAP2123ILRNA
SNAP2123ILWNA
—
—
—
1.74"
(44.1)
2.48"
(63.0)
Pilot, Light On with Load On
15A, 120-277V AC
Description
Toggle Color
Single Pole
Pilot, Light On
with Load On,
Rocker, Red LED.
Black
Ivory
Red
White
SNAP2101PLBKNA
SNAP2101PLINA
SNAP2101PLRNA
SNAP2101PLWNA
Double Pole
Three Way
—
—
—
—
—
—
Double Pole
Three Way
—
—
—
—
—
—
Ø .19" (4.7)
Four Way
—
—
—
1.20"
(30.6)
SNAPSWJUMP
20A, 120-277V AC
Description
Toggle Color
Single Pole
Pilot, Light On
with Load On,
Rocker, Red LED.
Black
Ivory
Red
White
SNAP2121PLBKNA
SNAP2121PLINA
SNAP2121PLRNA
SNAP2121PLWNA
Four Way
—
—
—
Jumper/Tester
Description
Catalog Number
Jumper/Tester for Single Pole Circuits, Black Toggle, Blue LED Indicator.
SNAPSWJUMP
Jumper/Tester for Three Way Circuits, Black Toggle, Blue LED Indicator.
SNAP3WJUMP
SNAPSP1NA
SNAPConnect® Switch Pigtailed Connector, Assembled in USA
SNAPSPP1NA
Description
Single Pole (3 Wires)
Single Pole with Pilot
3 Way (4 Wires)
Clear right angle terminal, 6 inch leads, solid wire.
SNAPSP1NA
SNAPSPP1NA
SNAP3W1NA
Clear right angle terminal, 6 inch leads, stranded wire.
SNAPSP2NA
SNAPSPP2NA
SNAP3W2NA
Note: See page D-13 for accessories.
See page D-15 for wallplates.
See page D-20 for technical information.
HP Conversion Chart
Many of these products are Assembled in USA, as indicated, and many are Buy
American Compliant. Please contact Hubbell with any certification requirements.
www.hubbell-wiring.com
SNAP3W1NA
®
15A
20A
Wiring Device-Kellems
120V
.5HP
1HP
208V 240V
1.5HP 2HP
2HP
2HP
277V AC
2HP
2HP
Dimensions in Inches (mm)
D-5
Switches
15, 20 and 30 Ampere, 120-277 Volts AC
HBL® Extra Heavy Duty Industrial Series
1.25"
(31.8)
#6-32
TAP
3.28"
(83.2)
2.33"
(59.1)
2.28"
(57.9)
HBL Extra Heavy Duty Industrial Series, Back and Side Wired
15A, 120-277V AC
Description
Toggle Color
Single Pole
Double Pole
Three Way
Four Way
Toggle,
back and
side wired.
Black
Brown
Gray
Ivory
Light Almond
Red
White
HBL1201BK
HBL1201
HBL1201GY
HBL1201I
HBL1201LA
HBL1201R
HBL1201W
—
HBL1202
—
HBL1202I
—
—
—
HBL1203BK
HBL1203
HBL1203GY
HBL1203I
—
—
HBL1203W
HBL1204BK
HBL1204
HBL1204GY
HBL1204I
—
—
HBL1204W
1.13"
(28.7)
HBL1221
20A, 120-277V AC
1.25"
(31.8)
#6-32
TAP
3.28"
(83.2)
2.33"
(59.1)
Description
Toggle Color
Single Pole
Double Pole
Three Way
Four Way
Toggle,
back and
side wired.
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
HBL1221BK
HBL1221
HBL1221GY
HBL1221I
HBL1221LA
HBL1221OW
HBL1221R
HBL1221W
HBL1222BK
HBL1222
HBL1222GY
HBL1222I
HBL1222LA
HBL1222OW
HBL1222R
HBL1222W
HBL1223BK
HBL1223
HBL1223GY
HBL1223I
HBL1223LA
HBL1223OW
HBL1223R
HBL1223W
HBL1224BK
HBL1224
HBL1224GY
HBL1224I
HBL1224LA
HBL1224OW
HBL1224R
HBL1224W
Four Way
2.28"
(57.9)
30A, 120-277V AC
1.13"
(28.7)
HBL3031
1.25"
(31.8)
#6-32
TAP
3.28"
(83.2)
2.33"
(59.1)
2.28"
(57.9)
1.13"
(28.7)
HBL1221L and Key
Operates current
style AC
locking switches
(e.g.: HBL1221L).
RT
SE
IN
ACTUATE
Operates old style
AC locking switches
(e.g.: 1221L).
(One key furnished
with each locking switch.)
IN
SE
RT
HBL1209
Description
Key Guide Color
Single Pole
Double Pole
Three Way
Nylon toggle.
Brown
Ivory
White
HBL3031
HBL3031I
—
HBL3032
HBL3032I
HBL3032W
HBL3033
HBL3033I
—
HBL Extra Heavy Duty Industrial Locking Series,
Back and Side Wired
15A, 120-277V AC
Description
Key Guide Color
Single Pole
Double Pole
Three Way
Four Way
Key Guide,
back and
side wired.
Black
Gray
Ivory
White
HBL1201L
HBL1201LG
HBL1201LI
HBL1201LW
HBL1202L
HBL1202LG
HBL1202LI
HBL1202LW
HBL1203L
HBL1203LG
HBL1203LI
HBL1203LW
HBL1204L
HBL1204LG
HBL1204LI
HBL1204LW
Key for Locking switch.
#6-32
TAP
3.28"
(83.2)
2.38"
(60.5)
2.28"
(57.9)
1.66"
(42.2)
HBL1209*
20A, 120-277V AC
Description
Key Guide Color
Single Pole
Double Pole
Three Way
Four Way
Key Guide,
back and
side wired.
Black
Gray
Ivory
White
HBL1221L
HBL1221LG
HBL1221LI
HBL1221LW
HBL1222L
HBL1222LG
HBL1222LI
HBL1222LW
HBL1223L
HBL1223LG
HBL1223LI
HBL1223LW
HBL1224L
HBL1224LG
HBL1224LI
HBL1224LW
Key for Locking switch.
HBL1209*
HBL Extra Heavy Duty Industrial AC Barrel Key Locking Switch†,
Back and Side Wired
20A, 120-277V AC
Description
1.25"
(31.8)
Single Pole
Double Pole
Three Way
Four Way
Chrome operator, Chrome
back and side wired.
Key Guide Color
HBL1221RKL**
HBL1222RKL**
HBL1223RKL**
HBL1224RKL**
Replacement Barrel Key.
HBL1209RKL*
Note: Keys are supplied with each locking switch. For extra keys order HBL1209.
*Not UL Listed, CSA Certified.
**Not Fed. Spec.
†See Wallplate section, page N-17 for wallplates.
See page D-13 for accessories.
See page D-15 for wallplates.
See page D-20 for technical information.
HP Conversion Chart
HBL1222RKL and Key
15A
20A
30A
Dimensions in Inches (mm)
D-6
—
—
—
®
Wiring Device-Kellems
120V
.5HP
1HP
2HP
208V 240V
1.5HP 2HP
2HP
2HP
2HP
2HP
277V AC
2HP
2HP
2HP
www.hubbell-wiring.com
Switches
15, 20 and 30 Ampere, 120-277 and 347 Volts AC
HBL® Extra Heavy Duty Industrial Series
1.25"
(31.8)
HBL Extra Heavy Duty Industrial Series,
Illuminated Toggle Switches, Light On with Load Off, Back and Side Wired
Description
Toggle Color
Rating
Single Pole
Double Pole
Nylon toggle,
back and
side wired.
Ivory
15A 120-277V AC
HBL1201IL
—
HBL1203IL
Ivory
Clear
Red
20A 120-277V AC
HBL1221IL
HBL1221ILC
HBL1221ILR
—
—
—
HBL1223IL
HBL1223ILC
—
#6-32
TAP
Three Way
3.28"
(83.2)
2.33"
(59.1)
2.28"
(57.9)
1.13"
(28.7)
HBL Extra Heavy Duty Industrial Series,
Pilot Light Switches, Light On with Load On, Back and Side Wired
Description
Toggle Color
Rating
Single Pole
Nylon toggle,
back and
side wired.
Red
15A 120-277V AC
HBL1201PL
Red
Clear
Green
20A 120-277V AC
HBL1221PL
HBL1221PLC
HBL1221PLG
HBL1222PL
—
—
Red
30A 120-277V AC
HBL3031PL
HBL3032PL
HBL1221ILC
Double Pole
Three Way
—
1.25"
(31.8)
HBL1203PL
#6-32
TAP
HBL1223PL
HBL1223PLC
—
—
3.28"
(83.2)
2.33"
(59.1)
2.28"
(57.9)
Momentary Contact, Specification Grade,
Three Position, Two Circuit, Center Off, Back and Side Wired
1.13"
(28.7)
Description
Toggle Color
15A, 120-277V AC
20A, 120-277V AC
Nylon toggle,
back and
side wired.
Brown
Gray
Ivory
Red
White
HBL1556
HBL1556GY
HBL1556I
HBL1556R
HBL1556W
HBL1557
HBL1557GY
HBL1557I
—
HBL1557W
Key guide,
back and
side wired.
Black
Gray
Ivory
White
HBL1556L
HBL1556LG
HBL1556LI
HBL1556LW
HBL1557L
HBL1557LG
HBL1557LI
HBL1557LW
HBL1221PL
Operates current
style AC
locking switches
(e.g.: HBL1221L).
RT
SE
IN
(One key furnished
with each locking switch.)
IN
SE
RT
HBL1209
HBL1209*
Key for Locking switch.
Operates old style
AC locking switches
(e.g.: 1221L).
ACTUATE
1.25"
(31.8)
#6-32
TAP
Maintained Contact, Specification Grade,
Three Position, Two Circuit, Center Off, Single Pole, Double Throw
Description
Toggle Color
15A 120-277V AC
20A 120-277V AC
Nylon toggle, back
and side wired.
Brown
Ivory
White
HBL1381
HBL1381I
—
HBL1385
HBL1385I
HBL1385W
30A 120-277V AC
—
—
—
2.37"
(60.2)
3.28"
(83.3)
Three Position, Two Circuit, Center Off, Double Pole, Double Throw
1.31"
(33.2)
Description
Toggle Color
15A 120-277V AC
20A 120-277V AC
30A 120-277V AC
Nylon toggle, back
and side wired.
Brown
Ivory
HBL1382
HBL1382I
HBL1386
HBL1386I
HBL1388
HBL1388I
HBL1381
Locking.
—
HBL1386L
—
Key for Locking switch.
—
HBL1209*
—
1.25"
(31.8)
Note: Keys are supplied with each locking switch. For extra keys order HBL1209.
*Not UL Listed, CSA Certified.
See page D-13 for accessories.
See page D-15 for wallplates.
See page D-20 for technical information.
2.37"
(60.2)
3.28"
(83.3)
1.31"
(33.2)
HP Conversion Chart
15A
20A
30A
120V
.5HP
1HP
2HP
208V 240V
1.5HP 2HP
2HP
2HP
2HP
2HP
#6-32
TAP
HBL1386I
277V AC
2HP
2HP
2HP
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
D-7
Switches
15 and 20 Ampere, 120-277 Volts AC
Hubbell-PRO Heavy Duty Industrial Series
1.25"
(31.8)
#6-32
TAP
3.28"
(83.3)
2.38"
(60.5)
2.28"
(57.9)
Hubbell-PRO Heavy Duty Industrial Series,
15A, 120-277V AC
Description
Toggle Color
Single Pole
Toggle,
back and
side wired.
Almond
Black
Brown
Gray
Ivory
Light Almond
White
1201AL
1201BK
1201B
1201GY
1201I
1201LA
1201W
1.13"
(28.7)
1.31"
(33.2)
Three Way
—
—
—
—
—
—
—
1203AL
1203BK
1203B
1203GY
1203I
1203LA
1203W
Four Way
—
—
—
—
—
—
—
Hubbell-PRO Heavy Duty Industrial Series,
20A, 120-277V AC
1201BK
1.25"
(31.8)
Double Pole
#6-32
TAP
3.28"
(83.3)
2.38"
(60.5)
Description
Toggle Color
Single Pole
Double Pole
Three Way
Four Way
Toggle,
back and
side wired.
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
1221AL
1221BK
1221B
1221GY
1221I
1221LA
1221R
1221W
1222AL
1222BK
1222B
1222GY
1222I
1222LA
1222R
1222W
1223AL
1223BK
1223B
1223GY
1223I
1223LA
1223R
1223W
1224AL
1224BK
1224B
1224GY
1224I
1224LA
1224R
1224W
2.28"
(57.9)
1.13"
(28.7)
1.31"
(33.2)
1221I
1.25"
(31.8)
#6-32
TAP
3.28"
(83.3)
2.38"
(60.5)
Hubbell-PRO Pre-Wired/Leaded Heavy Duty Industrial Series
20A, 120-277V AC - 8" #12 AWG THHN
Description
Toggle Color
Single Pole
Double Pole
Three Way
Four Way
Toggle,
Pre-wired leads.
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
1221PWAL
1221PWBK
1221PWB
1221PWGY
1221PWI
1221PWLA
1221PWR
1221PWW
1222PWAL
1222PWBK
1222PWB
1222PWGY
1222PWI
1222PWLA
1222PWR
1222PWW
1223PWAL
1223PWBK
1223PWB
1223PWGY
1223PWI
1223PWLA
1223PWR
1223PWW
1224PWAL
1224PWBK
1224PWB
1224PWGY
1224PWI
1224PWLA
1224PWR
1224PWW
Double Pole
Three Way
Four Way
—
—
—
—
—
—
2.28"
(57.9)
1.13"
(28.7)
1.31"
(33.2)
1221PWI
1.25"
(31.8)
Hubbell-PRO Hospital Call Switch, with Lanyard
20A, 120-277V AC
#6-32
TAP
Description
Toggle Color
Single Pole
Toggle,
back and
side wired.
Gray
Ivory
White
HBL1221GHCS
HBL1221IHCS
HBL1221WHCS
—
—
—
Note: See page D-13 for accessories.
See page D-15 for wallplates.
See page D-20 for technical information.
3.28"
(83.3)
2.38"
(60.5)
1.31"
(33.2)
2.28"
(57.9)
1.13"
(28.7)
HBL1221IHCS
HP Conversion Chart
15A
20A
Dimensions in Inches (mm)
D-8
®
Wiring Device-Kellems
120V
.5HP
1HP
208V 240V
1.5HP 2HP
2HP
2HP
277V AC
2HP
2HP
www.hubbell-wiring.com
Switches
15 and 20 Ampere, 120-277 Volts AC
Pre-Wired/Leaded Toggle and Decorator Series
Pre-Wired/Leaded Toggle Series Specification Grade
15A, 120-277V AC - 8" #12 AWG THHN
Description
Toggle Color
Single Pole
Double Pole
Three Way
Four Way
Toggle, Nylon,
Pre-wired leads.
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
White
CSL115AL
CSL115BK
CSL115
CSL115GY
CSL115I
CSL115LA
CSL115OW
CSL115W
CSL215AL
CSL215BK
CSL215
CSL215GY
CSL215I
CSL215LA
CSL215OW
CSL215W
CSL315AL
CSL315BK
CSL315
CSL315GY
CSL315I
CSL315LA
CSL315OW
CSL315W
CSL415AL
CSL415BK
CSL415
CSL415GY
CSL415I
CSL415LA
CSL415OW
CSL415W
20A, 120-277V AC
Description
Toggle Color
Single Pole
Double Pole
Three Way
Four Way
Toggle, Nylon,
Pre-wired leads.
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
CSL120AL
CSL120BK
CSL120
CSL120GY
CSL120I
CSL120LA
CSL120OW
CSL120R
CSL120W
CSL220AL
CSL220BK
CSL220
CSL220GY
CSL220I
CSL220LA
CSL220OW
CSL220R
CSL220W
CSL320AL
CSL320BK
CSL320
CSL320GY
CSL320I
CSL320LA
CSL320OW
CSL320R
CSL320W
CSL420AL
CSL420BK
CSL420
CSL420GY
CSL420I
CSL420LA
CSL420OW
CSL420R
CSL420W
1.25"
(31.8)
3.28"
(83.3)
2.38"
(60.5)
#6-32
TAP
2.28"
(57.9)
1.13"
(28.7)
1.31"
(33.2)
CSL120
Pre-Wired/Leaded Decorator Series Specification Grade
15A, 120-277V AC - 8" #12 AWG THHN
Description
Rocker Color
Single Pole
Rocker,
Polycarbonate,
Pre-wired leads.
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
White
DSL115AL
DSL115BK
DSL115
DSL115GY
DSL115I
DSL115LA
DSL115OW
DSL115W
Double Pole
—
—
—
—
—
—
—
—
Three Way
Four Way
DSL315AL
DSL315BK
DSL315
DSL315GY
DSL315I
DSL315LA
DSL315OW
DSL315W
—
—
—
—
—
—
—
—
#6-32 TAP
Self Grounding
Clip
3.81"
(96.7)
20A, 120-277V AC
Description
Rocker Color
Single Pole
Double Pole
Three Way
Four Way
Rocker,
Polycarbonate,
Pre-wired leads.
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
White
DSL120AL
DSL120BK
DSL120
DSL120GY
DSL120I
DSL120LA
DSL120OW
DSL120W
DSL220AL
DSL220BK
DSL220
DSL220GY
DSL220I
DSL220LA
DSL220OW
DSL220W
DSL320AL
DSL320BK
DSL320
DSL320GY
DSL320I
DSL320LA
DSL320OW
DSL320W
DSL420AL
DSL420BK
DSL420
DSL420GY
DSL420I
DSL420LA
DSL420OW
DSL420W
Double Pole
Three Way
Four Way
2.78"
(70.6)
3.28"
(83.3)
1.48"
(37.6)
1.12"
(28.4)
DSL315W
Illuminated, Light On with Load Off
20A, 120-277V AC
Description
Rocker Color
Single Pole
Rocker,
Polycarbonate,
Pre-wired leads,
Blue LED.
Ivory
White
DSL120IL
DSL120ILW
—
—
DSL320IL
DSL320ILW
—
—
Pilot, Light On with Load On
20A, 120-277V AC
Description
Rocker Color
Single Pole
Rocker,
Polycarbonate,
Pre-wired leads,
Red LED.
Red
DSL120PL
Double Pole
Three Way
—
—
Four Way
—
Note: See page D-13 for accessories.
See page D-15 for wallplates.
See page D-20 for technical information.
HP Conversion Chart
15A
20A
120V
.5HP
1HP
208V 240V
1.5HP 2HP
2HP
2HP
277V AC
2HP
2HP
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
D-9
Switches
15 and 20 Ampere, 120-277 Volts AC
Specification Grade Commercial Series
Specification Grade Commercial Series,
15A, 120-277V AC
1.25"
(31.8)
3.28"
(83.3)
2.38"
(60.5)
Description
Toggle Color
Single Pole
Double Pole
Three Way
Four Way
Toggle,
back and
side wired.
Almond
Black
Brown
Gray
Ivory
Light Almond
White
CSB115AL
CSB115BK
CSB115
CSB115GY
CSB115I
CSB115LA
CSB115W
CSB215AL
CSB215BK
CSB215
CSB215GY
CSB215I
CSB215LA
CSB215W
CSB315AL
CSB315BK
CSB315
CSB315GY
CSB315I
CSB315LA
CSB315W
CSB415AL
CSB415BK
CSB415
CSB415GY
CSB415I
CSB415LA
CSB415W
#6-32
TAP
2.28"
(57.9)
1.13"
(28.7)
1.31"
(33.2)
Specification Grade Commercial Series,
20A, 120-277V AC
Description
Toggle Color
Single Pole
Double Pole
Three Way
Four Way
Toggle,
back and
side wired.
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
CSB120AL
CSB120BK
CSB120
CSB120GY
CSB120I
CSB120LA
CSB120R
CSB120W
CSB220AL
CSB220BK
CSB220
CSB220GY
CSB220I
CSB220LA
CSB220R
CSB220W
CSB320AL
CSB320BK
CSB320
CSB320GY
CSB320I
CSB320LA
CSB320R
CSB320W
CSB420AL
CSB420BK
CSB420
CSB420GY
CSB420I
CSB420LA
CSB420R
CSB420W
Four Way
CSB120
1.25"
(31.8)
3.28"
(83.3)
2.38"
(60.5)
Specification Grade Commercial Series,
15A, 120-277V AC
#6-32
TAP
Description
Toggle Color
Single Pole
Double Pole
Three Way
Toggle,
side wired only.
Almond
Black
Brown
Gray
Ivory
Light Almond
White
CS115AL
CS115BK
CS115
CS115GY
CS115I
CS115LA
CS115W
—
—
—
—
—
—
—
CS315AL
CS315BK
CS315
CS315GY
CS315I
CS315LA
CS315W
Three Way
2.28"
(57.9)
—
—
—
—
—
—
—
1.13"
(28.7)
1.31"
(33.2)
CS115I
Specification Grade Commercial Series,
20A, 120-277V AC
Description
Toggle Color
Single Pole
Double Pole
Toggle,
side wired only.
Almond
Black
Brown
Gray
Ivory
Light Almond
White
CS120AL
CS120BK
CS120
CS120GY
CS120I
CS120LA
CS120W
—
—
—
—
—
—
—
Four Way
CS320AL
CS320BK
CS320
CS320GY
CS320I
CS320LA
CS320W
—
—
—
—
—
—
—
Note: See page D-9 for pre-wired/leaded devices.
See page D-13 for accessories.
See page D-15 for wallplates.
See page D-20 for technical information.
HP Conversion Chart
15A
20A
Dimensions in Inches (mm)
D-10
®
Wiring Device-Kellems
120V
.5HP
1HP
208V 240V
1.5HP 2HP
2HP
2HP
277V AC
2HP
2HP
www.hubbell-wiring.com
Switches
15 and 20 Ampere, 120-277 Volt AC
Style Line® Decorator Series Specification Grade
Style Line® Decorator Series Specification Grade,
15A, 120-277V AC
Description
Rocker Color
Single Pole
Double Pole
Rocker,
back and
side wired.
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
White
DS115AL
DS115BK
DS115
DS115GY
DS115I
DS115LA
DS115OW
DS115W
—
—
—
—
—
—
—
—
Three Way
Four Way
DS315AL
DS315BK
DS315
DS315GY
DS315I
DS315LA
DS315OW
DS315W
—
—
—
—
—
—
—
—
#6-32 TAP
Self Grounding
Clip
3.81"
(96.7)
Style Line® Decorator Series Specification Grade,
20A, 120-277V AC
Description
Rocker Color
Single Pole
Double Pole
Three Way
Four Way
Rocker,
back and
side wired.
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
DS120AL
DS120BK
DS120
DS120GY
DS120I
DS120LA
DS120OW
DS120R
DS120W
DS220AL
DS220BK
DS220B
DS220GY
DS220I
DS220LA
DS220OW
DS220R
DS220W
DS320AL
DS320BK
DS320
DS320GY
DS320I
DS320LA
DS320OW
DS320R
DS320W
DS420AL
DS420BK
DS420
DS420GY
DS420I
DS420LA
DS420OW
DS420R
DS420W
Three Way
Four Way
2.78"
(70.6)
3.28"
(83.3)
1.48"
(37.6)
DS115GY
Style Line® Decorator Series Specification Grade,
Illuminated, Light On with Load Off
20A, 120-277V AC
Description
Rocker Color
Single Pole
Rocker,
with Blue LED,
back and side wired.
Black
Ivory
White
DS120ILBK
DS120IL
DS120ILW
Double Pole
—
—
—
#6-32 TAP
DS320ILBK
DS320IL
DS320ILW
—
—
—
Self Grounding
Clip
3.81"
(96.7)
Style Line® Decorator Series Specification Grade,
Pilot, Light On with Load On
20A, 120-277V AC
Description
Rocker Color
Single Pole
Rocker,
with Red LED,
back and side wired.
Black
Ivory
White
DS120PLBK
DS120PLI
DS120PLW
1.12"
(28.4)
Double Pole
Three Way
—
—
—
—
—
—
Four Way
—
—
—
2.78"
(70.6)
3.28"
(83.3)
1.48"
(37.6)
1.12"
(28.4)
DS120PLI
Note: See page D-9 for pre-wired/leaded devices.
See page D-13 for accessories.
See page D-15 for wallplates.
See page D-20 for technical information.
HP Conversion Chart
15A
20A
120V
.5HP
1HP
208V 240V
1.5HP 2HP
2HP
2HP
277V AC
2HP
2HP
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
D-11
Switches
15 and 20 Ampere, 120-277 and 347 Volts AC
HBL® Extra Heavy Duty Industrial Series
HBL® Extra Heavy Duty Industrial Series
15A, 347V AC
1.30"
(33.1)
4.06"
(103.1)
#6-32
TAP
3.53"
(89.7)
2.41"
(61.2)
2.27"
(57.7)
1.19"
(30.2)
HBL18221CN
.94" (23.9)
1.50"
(38.1)
3.28"
(83.3)
.97" (24.6)
2.44"
(62.0)
2.38"
(60.5)
#6-32 TAP
HBL1281
1.50"
(38.1)
3.28"
(83.3) 2.38"
(60.5)
Description
Toggle Color
Single Pole
Three Way
Four Way
Nylon toggle,
back and
side wired.
Brown
Ivory
HBL18201CN
HBL18201ICN
Double Pole
—
—
HBL18203CN
HBL18203ICN
—
HBL18204ICN
Locking.
HBL18201LCN
—
HBL18203LCN
Key for Locking switch.
HBL1209*
HBL® Extra Heavy Duty Industrial Series
20A, 347V AC
Description
Toggle Color
Single Pole
Nylon toggle,
back and
side wired.
Brown
Ivory
HBL18221CN
HBL18221ICN
Double Pole
—
—
Three Way
Four Way
HBL18223CN
HBL18223ICN
—
HBL18224ICN
PresSwitch® Specification Grade Push Button, Standard Type
20A, 120-277V AC
Description
Toggle Color
Single Pole
Double Pole
Three Way
Four Way
Nylon actuator,
side wired only.
Brown
Ivory
HBL1281
HBL1281I
HBL1282
HBL1282I
HBL1283*
HBL1283I*
HBL1284*
HBL1284I*
Description
Toggle Color
Single Pole
Double Pole
Three Way
Four Way
Circuit normally closed,
side wired only.
Brown
HBL1281MC*
—
—
—
Circuit normally open,
side wired only.
Brown
HBL1281MO*
—
—
—
Momentary Type•
20A, 120-277V AC
.94" (23.9)
Illuminated and Pilot Light PresSwitch®,
120V AC Lighted Actuator, Light On with Load Off•
.97" (24.6)
Description
Toggle Color
Single Pole
Double Pole
Three Way
15A, nylon actuator.
Ivory
—
—
—
20A, nylon actuator.
Ivory
HBL1287I
—
2.44"
(62.0)
#6-32 TAP
HBL1297
—
Four Way
HBL1259I*
HBL1288I*
—
Pilot Light Actuator, Light On with Load On
20A, 120V AC
Description
Toggle Color
Single Pole
Double Pole
Nylon actuator.
Red
HBL1297
—
Three Way
Four Way
HBL1298*
—
Note: Keys are supplied with each locking switch. For extra keys order HBL1209.
*Not UL Listed, CSA Certified.
•Not HP rated.
See page D-13 for accessories.
See page D-15 for wallplates.
See page D-20 for technical information.
HP Conversion Chart
15A
20A
30A
Dimensions in Inches (mm)
D-12
®
Wiring Device-Kellems
120V
.5HP
1HP
2HP
208V 240V
1.5HP 2HP
2HP
2HP
2HP
2HP
277V AC
2HP
2HP
2HP
www.hubbell-wiring.com
Switches
Accessories
Pilot Light, SWITCHOUT® Lockout Device and Weatherproof Switch Plates for Toggle Switches
IP44
SUITABILITY
Pilot Light, 120-277V AC
Description
Catalog Number
Red neon pilot light, back and side wired, fits standard switch plate.
HBL1220RJ
Brass Locking Attachment for Switches Available in
Master Keying and Straight Keying Systems
Description
Catalog Number
Straight keying (all locks alike). Appropriate for most applications.
Straight cylinder type lock, each HBL96061 ordered operates on the same key.
All locks are keyed alike.
HBL96061*
Same as above except in dull chrome finish to match stainless steel plates.
HBL96061DCH*
Straight keying (individual). Straight cylinder type lock, each HBL96062 ordered
operates on a different key. All locks are keyed differently and individually.
This type cannot be master keyed.
HBL96062*
HBL1220RJ
HBL96061
SWITCHOUT® Lockout Device
Description
Catalog Number
Yellow, nylon toggle switch lockout device (Two devices per package).
HSLDPK2*
shown with wallplate and
switch (sold separately)
Weatherproof Plates
Description
Catalog Number
Clear bubble plate, silicone rubber for use with all general purpose AC toggle
and PresSwitch® switches. Fits both FS/FD and standard boxes.
HBL1795
Cast aluminum lift cover plate with fiber shield. For standard toggle and
PresSwitch®. Fits only FS/FD boxes.
HBL7420
HSLDPK2
Weatherproof Plates for PresSwitch®
.94"
(23.9)
Description
Catalog Number
Gray neoprene PresSwitch® plate. Fits FS/FD and standard boxes.
HBL1750
Same as above except yellow.
HBL17CM50
Gray neoprene PresSwitch® plate with 125V red pilot light. Fits only FS/FD boxes.
HBL1785
Same as above except yellow.
HBL17CM85
4.63"
(117.6)
1.88"
(47.8)
3.25"
(82.6)
2.38"
(60.5)
Note: *Not UL Listed or CSA Certified.
Each locking wallplate is supplied with two keys.
See section Z for additional information on safety lockout devices.
See section N for additional wallplates.
.94"
(23.9)
1.88"
(47.8)
2.94"
(74.7)
HBL1795
.94"
(23.9)
1.88"
(47.8)
2.84
(72.1)
4.63"
(117.6)
4.63"
(117.6)
2.38"
(60.5)
3.25"
(82.6)
2.94"
(74.7)
HBL1785
3.25"
(82.6)
2.38"
(60.5)
2.94"
(74.7)
3.25" 4.56"
(82.6) (115.8)
.19 dia.
4 holes
(4.8)
HBL1750
1.89
(48.0)
HBL7420
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
D-13
Switches
Certification Chart
UL, CSA, and Fed. Spec. Listing Data
Catalog
Number
WS896
Listed
1201
1203
1221
1222
1223
1224
1221PW
1222PW
1223PW
1224PW
CS115
CS315
CS120
CS320
CSB115
CSB215
CSB315
CSB415
CSB120
CSB220
CSB320
CSB420
CSL115
CSL215
CSL315
CSL415
CSL120
CSL220
CSL320
CSL420
DS115
DS315
DS120
DS220
DS320
DS420
DS120IL
DS320IL
DS120PL
DSL115
DSL215
DSL315
DSL415
DSL120
DSL220
DSL320
DSL420
HBL1201
HBL1202
HBL1203
HBL1204
HBL1201IL
HBL1203IL
HBL1201PL
HBL1203PL
HBL1201L
HBL1202L
HBL1203L
HBL1204L
HBL1221
HBL1222
HBL1223
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
UL Listed
UL20
CSA
Certified
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Catalog
Number
HBL1224
HBL1221L
HBL1222L
HBL1223L
HBL1224L
HBL1221IL
HBL1223IL
HBL1221PL
HBL1222PL
HBL1223PL
HBL1221RKL
HBL1222RKL
HBL1223RKL
HBL1224RKL
HBL1259I
HBL1281
HBL1282
HBL1283
HBL1284
HBL1287I
HBL1288I
HBL1281MO
HBL1281MC
HBL1297
HBL1298
HBL1381
HBL1382
HBL1385
HBL1386
HBL1386L
HBL1388
HBL1556
HBL1557
HBL1556L
HBL1557L
HBL3031
HBL3032
HBL3033
HBL3031PL
HBL3031PL
HBL3032PL
SNAP1201
SNAP1201IL
SNAP1201PL
SNAP1203
SNAP1203IL
SNAP1221
SNAP1221IL
SNAP1221PL
SNAP1223
SNAP1223
SNAP1223IL
SNAP2101
SNAP2101IL
SNAP2101PL
SNAP2103
SNAP2103IL
SNAP2121
SNAP2121IL
SNAP2121PL
SNAP2123
SNAP2123IL
WS896
Listed
UL Listed
UL20
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
Yes
No
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CSA
Certified
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
Yes
No
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Note: Catalog numbers above represent all colors and variations.
D-14
®
Wiring Device-Kellems
www.hubbell-wiring.com
Switches
Accessories
Nylon and Metal Wallplates
1-Gang
2-Gang
3-Gang
Standard Size, Smooth Nylon, Toggle Switch Plates
Color
Catalog Number
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
NP1AL
NP1BK
NP1
NP1GY
NP1I
NP1LA
NP1OW
NP1R
NP1W
NP2AL
NP2BK
NP2
NP2GY
NP2I
NP2LA
NP2OW
NP2R
NP2W
NP3AL
NP3BK
NP3
NP3GY
NP3I
NP3LA
NP3OW
—
NP3W
SA2
SB2
SS2
SS2L
SBP3*
SS3
SS3L
Standard Size, Smooth Metal, Toggle Switch Plates
Color
Catalog Number
Aluminum
Brass
Stainless Steel, 302/304
Stainless Steel, 430
SA1
SB1
SS1
SS1L
1-Gang
Standard Size, Smooth Nylon, Style
Line®
Color
Catalog Number
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
NP26AL
NP26BK
NP26
NP26GY
NP26I
NP26LA
NP26OW
NP26R
NP26W
2-Gang
3-Gang
Switch Plates
NP262AL
NP262BK
NP262
NP262GY
NP262I
NP262LA
NP262OW
NP262R
NP262W
NP263AL
NP263BK
NP263
NP263GY
NP263I
NP263LA
NP263OW
NP263R
NP263W
Standard Size, Smooth Metal, Style Line® Switch Plates
Color
Catalog Number
Aluminum
Brass
Stainless Steel, 302/304
Stainless Steel, 430
SB26
SS26
SS26L
SB262
SS262
SS262L
SS263
—
Note: See section N for additional wallplates.
*Brass plated.
Available as a custom metal wallplate. See section N for additional information.
www.hubbell-wiring.com
®
Wiring Device-Kellems
D-15
Switches
600 to 2000 Watts, 120 Volts AC 60Hz
Slide and Rotary Control Dimmers
2.75"
(70.0)
4.50"
(114.3)
600 and 1000W Dimmer
Fits Single-Gang Wall Boxes.
AS63 and AS103
4.50"
(114.3)
Architectural Grade, Incandescent Preset Slide Control Dimmers
Description
Color
Rating
Catalog Number
Single pole/three way - preset.
White
600W, 120V AC, 60Hz
AS63
Single pole/three way - preset.
White
1000W, 120V AC, 60Hz
AS103
Single pole/three way - preset.
White
1500W, 120V AC, 60Hz
AS153
Single pole/three way - preset.
White
2000W, 120V AC, 60Hz
AS203
Accessories
Description
Color
Catalog Number
Small plate kit for 600W and 1000W models.
Includes non-metallic trimplate and slide.
Ivory
White
AS1I
AS1W
Large plate kit for 1500W and 2000W models.
Includes non-metallic trimplate and slide.
Ivory
White
AS2I
AS2W
Note: The dimmers listed above can be wired for single pole or three way applications.
See page D-17 for ganging and derating.
4.50"
(114.3)
1500 and 2000W Dimmer
Fits Single-Gang Wall Boxes.
AS153 and AS203
Architectural Grade, Incandescent Rotary Control Dimmers
2.75"
(70.0)
4.50"
(114.3)
600 and 1000W Dimmer
Fits Single-Gang Wall Boxes.
AR61 and AR101
4.50"
(114.3)
Description
Color
Rating
Catalog Number
Single pole - push on/off.
Three way - push on/off.
Beige
Beige
600W, 120V AC, 60Hz
AR61
AR63
Single pole - push on/off.
Three way - push on/off.
Beige
Beige
1000W, 120V AC, 60Hz
AR101
AR103
Single pole, rotary on/off.
Beige
1500W, 120V AC, 60Hz
AR151
Single pole, rotary on/off.
Beige
2000W, 120V AC, 60Hz
AR201
Accessories
Description
Color
Catalog Number
Small plate kit for 600W and 1000W models.
Includes non-metallic trimplate and knob.
Beige
White
AR1BE
AR1W
Large plate kit for 1500W and 2000W models.
Includes non-metallic trimplate and knob.
Beige
White
AR2BE
AR2W
Note: See page D-17 for ganging and derating.
4.50"
(114.3)
1500 and 2000W Dimmer
Fits Single-Gang Wall Boxes.
AR151 and AR201
D-16
®
Wiring Device-Kellems
www.hubbell-wiring.com
Switches
Dimmer Ganging and Derating
Architectural Grade Slide and Rotary SeriesNumber of Switchboxes
Required with Dimmer Side sections Intact
0
Number of
Large Controls
(1500W and 2000W)
Number of Small Controls (600W and 1000W)
1
2
3
4
5
Example of 4-Gang Installation
6
0
0
1
1+1
4
1+4
7
1+7
1
1
3
5
6
8
9
11
2
4
6
7
9
10
12
13
3
6
8
10
11
13
14
16
4
9
11
12
14
15
17
18
Number of Gangs Required
Three small dimmers in this box.
4-Gang Gangable
Switchbox
Note: When ganging an even number of small controls with no side sections removed (plus numbers in chart),
use gangable switchboxes with tapped ears as shown below. Do not use plaster rings or gangbox
covers. Space an additional switchbox ¾ in. apart from the other switchbox(es). A ¾ in. close nipple
is recommended as a spacer between the switchboxes.
One
small
dimmer
in this
box.
1-Gang
Gangable
Switchbox
3/4 Space
(Use Close Nipple)
Number of Switchboxes Required with Side Sections Removed
0
Number of
Large Controls
(1500W and 2000W)
Number of Small Controls (600W and 1000W)
1
2
3
4
5
6
0
0
1
2
3
4
5
6
1
1
3
4
5
6
7
8
2
3
5
6
7
8
9
10
3
5
7
8
9
10
11
12
4
7
9
10
11
12
13
14
Number of Gangs Required
Note: When removing side sections, remove only inner side sections. Do not remove side sections on outer
ends of gang. The same installation rules apply to rotary dimmers (not shown).
Remove All Inner
Side Sections (Shaded)
Do Not
Remove Outer
Side Sections
Derating Chart
No side
sections removed
One side
section removed
Both side
sections removed
600W
1000W
1500W
2000W
600W
900W
1250W
1800W
500W
700W
1000W
1500W
Note: When ganging any combination of small and large controls, place a small control on one extreme end of
the gang, and a large control at the other end of the gang. When ganging with side sections intact, use
offset mounting holes. When ganging with side sections removed, use center mounting holes. Allow a
¹⁄₃₂ in. gap (space) between controls for ease in attaching the faceplate.
Specification Grade Slide and Rotary Series
Switchboxes Required: Side sections removed
Derating Chart
1 dimmer
in wall box
2 dimmers
in wall box
3 or more dimmers
in wall box
600W
1000W
5A fan speed
500W
800W
4A fan speed
400W
650W
3A fan speed
www.hubbell-wiring.com
®
Wiring Device-Kellems
D-17
Switches
Heavy Duty Panel Mount
Panel Mount and Bat Handle Switches
10A 250V AC 20A 125V AC Horsepower Rated ¾ HP, 125-250V AC
Description
Single pole/
single throw.
OF
1.13"
(28.7)
ON
. "
(1 .2)
HBL11
Single pole/
single throw
momentary.
OF
Single pole/
double throw.
F
1.13"
(28.7)
ry
nta
ON
ON
Single pole/
double throw
3-position
center off.
ON
ON
Single pole/
double throw
3-position
center off
momentary.
1.13"
(28.7)
ON
Screw
Spade
HBL11M
HBL11SPM
Screw
Spade
HBL12
HBL12SP
Screw
Spade
HBL123
HBL123SP
Screw
Spade
HBL123MM
HBL123SPMM
Screw Terminal Shown
Mo
ON
HBL11
HBL11SP
Screw Terminal Shown
. 1" (1 . )
OFF
. "
(1 .2)
Screw
Spade
Screw Terminal Shown
. 1" (1 . )
1.13"
(28.7)
. "
(1 .2)
Catalog Number
Screw Terminal Shown
. 1" (1 . )
me
Mo
. "
(1 .2)
HBL123SP
. 1" (1 . )
F
Terminal
me
nta
. 1"
(1 . )
ry
1.13"
(28.7)
OFF
y
tar
ONomen
. "
(1 .2)
M
Screw Terminal Shown
Note: All threaded stems ¹⁵₃₂ in.–32 thread.
10A 240V AC 15A 120V AC
Description
Single pole/
single throw.
ON
OF
F
Terminal
Catalog Number
Screw
HBL118
0.62" (15.7)
1.78"
0.48" (12.2) (45.2)
0.31" (7.9)
0.37" (9.4)
0.56" (14.2)
0.67" (17.0)
Note: ¹⁵₃₂ in.–32 thread.
4A 250V 8A 125V 10A 120V AC 1/3 HP 120V AC
Description
Terminal
Catalog Number
Single pole/
single throw.
#18 Std. AWG
Copper Wire
Leads 105° C
Black.
HBL11WL
Note: ¹⁵₃₂ in.–32 thread, keyway .080 x .035.
Specifications
Impact Resistant Thermoplastic Body.
Fine Silver Contacts.
Knurled Nut, Hex Nut And Strap All Nickel Plated.
Keyed Brass Bushing Nickel Plated.
Brass Toggle Nickel Plated.
Choice of Terminal Design: .250 in. (6.3) Male Tab Spade Type or 6/32 Screw Type.
UL Recognized.
Dimensions in Inches (mm)
D-18
®
Wiring Device-Kellems
www.hubbell-wiring.com
Switches
Heavy Duty Panel Mount
Panel Mount and Bat Handle Switches
10A 250V AC 20A 125V AC Horsepower Rated 1½ HP, 125-250V AC
Description
Double pole/
single throw.
ON
. "
(11. )
.80" (20.3)
1.30"
(33.0)
. "
(1 .1)
Double pole/
single throw.
OF
Terminal
Catalog Number
Screw
Spade
HBL21
HBL21SP
Screw
Spade
HBL22
HBL22SP
Screw
Spade
HBL223
HBL223SP
Screw
Spade
HBL223MM
HBL223SPMM
Screw
Spade
SSB1
F
ON
.80" (20.3)
HBL21
1.30"
(33.0)
. "
(1 .1)
Double pole/
double throw
3-position
center off.
ON
.80" (20.3)
1.30"
(33.0)
OFF
. "
(1 .1)
Double pole/
double throw
3-position
center off
momentary.
ON
ON
ON
.80" (20.3)
OFF
. "
(1 .1)
HBL223
1.30"
(33.0)
ON
Silicone
rubber boot.
Note: All threaded stems ¹⁵₃₂ in.–32 thread.
See Y-33 for information on 12V DC tapered handle switches.
SSB1
4A 250V 8A 125V 10A 120V AC 1/3 HP 120V AC
Description
Terminal
Catalog Number
Single pole/
single throw.
#18 Std. AWG
Copper Wire
Leads 105° C
Black.
HBL11PBWL
{
{
HBL11PBWL
Note: ¹⁵₃₂ in.–32 thread, keyway .080 x .035.
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
D-19
Switches
Technical Information
Toggle Switch Wiring Diagrams and Specifications
Standard Toggle Type Switches
SINGLE POLE
DOUBLE POLE
3 WAY
3 WAY
3 WAY
4 WAY
3 WAY
L
L
L
L
LINE
BLACK
LINE
NEUTRAL
WHITE
NEUTRAL
Illuminated Switches (light on with load off)
SINGLE POLE LIGHTED
Pilot Light Switches (light on with load on)
3 WAY LIGHTED
SINGLE POLE PILOT
DOUBLE POLE PILOT
M
L
L
L
L
L
L
L
LINE
BLACK
NEUTRAL
WHITE
LINE 1
BLACK
NEUTRAL
LINE 2
WHITE
Three Position Switches, Momentary and Maintained
SPDT
CENTER OFF
B
L
K
B
B
W
H
T
L
O
A
D
L
DPDT
CENTER OFF
STRIP
GAGE
B
L
K
W
H
T
BLACK
L-2
B-1
B-2
A-1
A-2
BLACK
WHITE
NEUTRAL
WHITE
RED
LINE 2
RED
M
L-1
M
L
LINE 1
STRIP
GAGE
Three Way Pilot Switches
LINE
NEUTRAL
Specifications - HBL® Extra Heavy Duty Industrial Grade Switches (SP, DP, 3-Way, 4-Way)
Listings
Component
Material
UL Listed
CSA Certified
Verified to Fed. Spec. W-S-896,
SP, DP, 3-way and 4-way
Base
Top
Toggle
Terminals
Terminal Screws
Mounting Bridge
Contacts
Moveable Contact Arm
Rocker
Ground Terminal
Ground Screw
Automatic Grounding Clip
Thermoset, Color Coded by Amperage
Thermoset, Gray
Nylon
Brass
Brass
Nickel Plated Steel
Silver Alloy
Brass
Elastomer
Nickel-Plated Steel
Brass
Stainless Steel
Performance Data
Electrical
Dielectric Voltage
Max. Working Voltage
Overload
Temperature Rise
Max. Continuous Current
Endurance
Withstands 1500V AC minimum for 1 minute.
277V AC.
Minimum 4.8 times rated current for 100 cycles.
30°C maximum at rated current.
15A, 20A, 30A.
50,000 cycles min., tungsten filament lamp load Fed. Spec. #WS896,
SP, DP, 3-way and 4-way.
Mechanical
Terminal Accommodations
#14 AWG min. - #10 AWG max. solid and stranded copper wire only.
Environmental
Flammability
Operating Temperature
UL 94V-2.
Max. continuous: 75°C; Min. continuous: -40°C without impact.
Dimensions in Inches (mm)
D-20
®
Wiring Device-Kellems
www.hubbell-wiring.com
Section E
H-MOSS® Controls
Index
Product
Page
Sensor Technology
Technologies for Smart Buildings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2
Energy Savings with Occupancy Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . E-3
Wall Switches
Wall Switches with Adaptive Technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . E-5
Wall Switches with Passive Infrared Technology and Digital Timer. . . . . . . . E-6
Ceiling Sensors
Low Voltage and Line Voltage Ceiling Sensors. . . . . . . . . . . . . . . . . . . . . . . . E-7
Wall Mount Sensors, Control Units and Accessories . . . . . . . . . . . . . . . . . . . E-8
OPTIMYZER™ High Bay Controls and Daylight Harvesting . . . . . . . . . . . . . E-9
H-MOSS®|MAXX™ Harsh Environment Occupancy Sensors
Watertight OPTIMYZER®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-11
WL-Series Wireless Sensors and Controls
Wall Switches with Adaptive Technology. . . . . . . . . . . . . . . . . . . . . . . . . . . E-12
Plug Load Control Products for ASHRAE and CEC Title 24 Compliance
System Overview / Methods for Complaince. . . . . . . . . . . . . . . . . . . . . . . . E-14
Control Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-15
Coverage Patterns, Specifications and Wiring Schematics
WL-Series Wireless Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-16
Wall Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-19
Ceiling Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-22
OPTIMYZER™ High Bay Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-23
H-MOSS®|MAXX™ Harsh Environment Occupancy Sensors. . . . . . . . . . . E-24
Control Units and Add-A-Relay. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-25
WLC Load Control with Wireless Receive. . . . . . . . . . . . . . . . . . . . . . . . . . . E-26
Ceiling and Wall Mount Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-27
Wall and Ceiling Mount
Sensors
H-MOSS®|MAXX™ Sensors
WL-Series Wireless Sensors
and Controls
High Bay and
Daylight Harvesting
www.hubbell-wiring.com
®
Wiring Device-Kellems
E-1
H-MOSS® Controls
Technologies for Smart Buildings
H-MOSS® Occupancy Sensors Combine Innovative
Technologies for Industry Proven Performance.
Adaptive Technology
Adaptive Technology is a Hubbell breakthrough that
delivers benefits to both building owners and occupants.
The building owner achieves reduced energy costs, fewer
adjustments and less maintenance, and the building
occupant experiences fewer false-offs and disturbances.
Adaptive technology occupancy sensors use
microprocessors that make all the decisions for setting
adjustments. Internal software constantly monitors the
controlled area and automatically adjusts the sensitivity
and timer based on environmental history. This means
that instead of manually adjusting the sensor for seasonal
changes, modified airflow, furniture layout or occupancy
pattern changes, the sensor automatically adjusts itself.
These automatic adjustments eliminate the need for
multiple manual adjustments by maintenance personnel
or outside contractors. Hubbell offers adaptive technology
throughout its product offering—wall switches, ceiling and
wall mount sensors—in conjunction with dual technology,
ultrasonic and passive infrared products.
How to Select the Right Technology for the Proper Application
Dual Technology
Dual technology occupancy sensors
combine both passive infrared (PIR)
and ultrasonic (US) technologies
for maximum reliability. Because
US and PIR need to both detect
occupancy to turn lighting on, dual
technology sensors minimize the risk
of lights coming on when the space
is unoccupied—false triggering.
Continued detection by only one
technology then keeps lighting on as
necessary. Dual technology sensors
offer the best performance for most
applications.
E-2
Ultrasonic (US)
Ultrasonic (US) technology senses
occupancy by bouncing sound waves (32
kHz - 45 kHz) off of objects and detecting
a frequency shift between the emitted
and reflected sound waves. Movement
by a person or object within a space
causes a shift in frequency, which the
sensor interprets as occupancy. While US
occupancy sensors have a limited range,
they are excellent at detecting even minor
motion such as typing and filing, and they
do not require an unobstructed line-ofsight. This makes US technology sensors
ideal for an application like an office with
cubicles or a restroom with stalls.
®
Wiring Device-Kellems
Passive Infrared (PIR)
Passive infrared (PIR) technology
senses occupancy by detecting the
movement of heat emitted from the
human body against the background
space. Unlike US technology, PIR
sensors require an unobstructed
line-of-sight for detection. These
sensors use a segmented lens, which
divides the coverage area into zones.
Movement between zones is then
interpreted as occupancy. PIR sensors
are ideal for detecting major motion
(e.g. walking), and they work best in
small, enclosed spaces with high levels
of occupant movement.
www.hubbell-wiring.com
H-MOSS® Controls
Energy Savings with Occupancy Sensors
Typical Applications
Application
Office
Small
Large
Open Office
Wall Switch
Ceiling
Sensor
Wall
Sensor
Applications are generalized. Consult
your Hubbell representative for the
type of technology and products
that fit your needs.
Storage/
Warehouse
Rest Room
Conference
Room
Classroom
Sensor Technology
Adaptive
Dual
+
+
+
+
+
Ultrasonic
+
+
+
Small
Large
Small
Large
Small
Large
Hall
+
+
+
+
+
+
Wall Switch
Ceiling
+
+
+
+
+
+
+
+
Small
Large
Sensor Style
PIR
+
+
+
+
+
+
+
Hubbell Occupancy Sensors Play a Key Role
+
+
+
+
+
+
Wall
+
Electrical bill impact for a typical
office building*
In the U.S., lighting consumes 22% of electricity and represents
$40 billion a year in energy costs. Using advanced technology,
Hubbell’s H-MOSS® Occupancy Sensors are doing their part
to save energy and provide sustainability by automatically and
effectively turning lights on when a room is occupied and off
when a room is vacant. In a typical office building, where lighting
accounts for 35 to 45% of energy use, H-MOSS Occupancy
Sensors have the potential to reduce wasted lighting by 13% to
90% for a significant return on investment (ROI).
Lighting Uses 39% of Total Electricity
Lighting
Other
39%
Savings
16%
14%
Potential
electricity
bill savings**
Refrigeration
Hubbell offers a broad range of occupancy and vacancy sensors
and lighting controls that meet the latest codes and standards,
including ASHRAE/IESNA 90.1 and California Energy Commission
(CEC) Title 24. H-MOSS Occupancy Sensors can also provide
LEED® points in categories like Sustainable Sites, Energy and
Atmosphere, Indoor Environmental Quality and Innovative
Design Process.
5%
Office Equipment
15%
Climate
Control
27%
Note: *Energy Information Administration:
- Commercial Buildings
- Energy Consumption Survey
**Based on 40% lighting savings from sensors. Actual results may vary.
Backed by Hubbell Service and Support
H-MOSS® Occupancy Sensors are backed by Hubbell’s GreenWise™
sustainability initiative and superior service and support including:
• Valuable online H-MOSS ROI worksheet for calculating energy savings
• Detailed H-MOSS online e-learning courses that can be taken
anywhere, anytime
• Product selection guide for choosing the right H-MOSS Occupancy
Sensor and technology
• Online specification assistance through spec wizard, AutoCAD
drawings, templates, BIM objects and documentation
• Comprehensive design assistance for deploying occupancy sensors in
a variety of applications
• Highly knowledgeable network of specification professionals and
trained, dedicated sales staff
• Backed by Hubbell who is committed to safeguarding the
environment through environmental stewardship, innovative
products and efficient operations
www.hubbell-wiring.com
®
Wiring Device-Kellems
E-3
H-MOSS® Controls
Adaptive Dual Technology Wall Switches
Features and Benefits
Available in ivory, white,
black, gray and light almond
Built in photocell with manual super
saver mode for daylight harvesting
Impact resistant hard lens is
standard and color matched
to the switch
Auto or manual “On” operating
modes. Available in either single
relay or dual relay versions for
enhanced savings with bi-level
switching applications
Dual technology sensing combines
the individual advantages of passive
infrared and ultrasonic detection
Designed for use on 120 or
277V AC circuits. No neutral
needed for fast retrofits
Adaptive technology - “Install
and forget” operation, analyzes
environment and adjusts sensitivity
and timer, eliminating the need for
manual adjustment
AD2000W1
with NP26W
Adaptive Passive Infrared Wall Switches
Features and Benefits
Heavy-duty relay controls up to
1000 watts at 120V AC or
1800 watts at 277V AC
Wall plate included for simplified
ordering
High density 1200 square foot
180° coverage with tough
tamper resistant lens
Nightlight version available to
provide minimum illumination
when the lights are off
Photocell can prevent lights
from turning on with sufficient
natural light
Tamper resistant push button
covers the time-out, service switch,
and vac/occ operation mode
settings
Front press switch allows the
occupant to switch the sensor
from automatic operation to
momentary off mode
Designed for use on 120 or
277V AC circuits. No neutral
needed for fast retrofits
E-4
ATP2000W
®
Wiring Device-Kellems
www.hubbell-wiring.com
H-MOSS® Controls
Wall Switches
Featuring Adaptive Technology
Adaptive Technology
•
•
•
•
•
•
•
Adaptive technology - “Install and forget” operation
All digital sensing technology
Dual 120/277V AC operation. No neutral required
Auto or manual “On” operating modes
No minimum load requirements
Hard lens (dual technology, passive infrared)
Steel mounting strap
• Zero arc point switching
• Built in photocell with manual super saver
mode for daylight harvesting
• Bi-level switching or dual load control
(2 or 2N suffix)
• cULus
AD2000W1
Dual (Ultrasonic and Passive Infrared)
1000 square foot coverage with photocell, 800W Incandescent, 1000W Fluorescent at 120V AC,
1800W Fluorescent at 277V AC, 50/60Hz.
Single Circuit
Description
Color
1 button for
manual/auto
control
Dual (ultrasonic and
passive infrared)
Black
Gray
Ivory
Light Almond
White
AD2000BK1
AD2000GY1
AD2000I1
AD2000LA1
AD2000W1
Dual Circuit
Auto control
with no button
2 buttons for
manual/auto
control
Auto control
with no button
AD2000BK1N
AD2000GY1N
AD2000I1N
AD2000LA1N
AD2000W1N
AD2000BK2
AD2000GY2
AD2000I2
AD2000LA2
AD2000W2
AD2000BK2N
AD2000GY2N
AD2000I2N
AD2000LA2N
AD2000W2N
AD2000W1N
AD2000W2N
Note: Wallplate sold separately. Neutral wire versions available. Use ADN prefix when ordering.
See pages E-16 and E-17 for coverage patterns and technical specifications.
Ultrasonic
400 square foot coverage with photocell, 800W Incandescent, 1000W Fluorescent at 120V AC,
1800W Fluorescent at 277V AC, 50/60Hz.
Single Circuit
Description
Color
1 button for
manual/auto
control
Ultrasonic
Black
Gray
Ivory
Light Almond
White
AU2000BK1
AU2000GY1
AU2000I1
AU2000LA1
AU2000W1
AU2000W1
Dual Circuit
Auto control
with no button
2 buttons for
manual/auto
control
Auto control
with no button
AU2000BK1N
AU2000GY1N
AU2000I1N
AU2000LA1N
AU2000W1N
AU2000BK2
AU2000GY2
AU2000I2
AU2000LA2
AU2000W2
AU2000BK2N
AU2000GY2N
AU2000I2N
AU2000LA2N
AU2000W2N
AU2000W2
Note: Wallplate sold separately. Neutral wire versions available. Use AUN prefix when ordering.
See pages E-16 and E-17 for coverage patterns and technical specifications.
Passive Infrared
1000 sq. ft. coverage with photocell, 800W Incandescent, 1000W Fluorescent at 120V AC,
1800W Fluorescent at 277V AC, 50/60Hz.
Single Circuit
Description
Color
1 button for
manual/auto
control
Passive infrared
Black
Gray
Ivory
Light Almond
White
AP2000BK1
AP2000GY1
AP2000I1
AP2000LA1
AP2000W1
Dual Circuit
Auto control
with no button
2 buttons for
manual/auto
control
Auto control
with no button
AP2000BK1N
AP2000GY1N
AP2000I1N
AP2000LA1N
AP2000W1N
AP2000BK2
AP2000GY2
AP2000I2
AP2000LA2
AP2000W2
AP2000BK2N
AP2000GY2N
AP2000I2N
AP2000LA2N
AP2000W2N
AP2000W1
Note: Wallplate sold separately. Neutral wire versions available. Use APN prefix when ordering.
See pages E-16 and E-17 for coverage patterns and technical specifications.
AP2000W2
www.hubbell-wiring.com
®
Wiring Device-Kellems
E-5
H-MOSS® Controls
Wall Switches and Digital Timer
Featuring Passive Infrared Technology
Adaptive Technology, Passive Infrared
•
•
•
•
•
AT1277W
Adaptive technology - “Install and forget” operation
Passive infrared technology
Dual 120/277V AC operation, no neutral required
Heavy duty relay (AT1277xx)
Audible alarm before turning lights off (AT1277xx)
Description
Color
Standard
High load adaptive wall
switch, 1800W @ 120V AC
and 4166W @ 277V AC
Ivory
White
AT1277I
AT1277W
Adaptive auto-adjusting;
selectable manual/autoon operation; dual-voltage
120/277V; 3-way capable
Gray
Ivory
Light Almond
White
ATP2000GY
ATP2000I
ATP2000LA
ATP2000W
•
•
•
•
•
1200 sq. ft. coverage
Built in photocell for daylight harvesting
Wallplate included
Steel mounting strap
cULus
w/ Nightlight
w/ Neutral
w/ Nightlight
and Neutral
—
—
—
—
—
—
ATP2000NGY
ATP2000NI
ATP2000NLA
ATP2000NW
—
ATP2004I
—
ATP2004W
—
ATP2004NI
—
ATP2004NW
Note: See pages E-17 and E-18 for coverage patterns and technical specifications.
ATP2000W
Passive Infrared Wall Switches
•
•
•
•
WS2000W
WS1000W
Passive infrared technology
Manual adjustment time delay (20 sec. to 30 min.)
Photocell (WS2000 series)
No neutral required
•
•
•
•
1200 sq. ft. coverage
Wallplate included
Steel mounting strap
cULus
Description
Color
Standard
w/ Nightlight
w/ Neutral
w/ Nightlight
and Neutral
Manual adjusting; selectable
manual/auto-on operation;
dual-voltage 120/277V;
3-way capable
Gray
Ivory
Light Almond
White
WS2000GY
WS2000I
WS2000LA
WS2000W
WS2000NGY
WS2000NI
WS2000NLA
WS2000NW
—
WS2004I
—
WS2004W
—
WS2004NI
—
WS2004NW
Manual adjusting;
auto-on operation;
120V AC only
Ivory
White
WS1000I
WS1000W
WS1000NI
WS1000NW
—
—
—
—
Manual adjusting;
Manual-on operation;
120V AC only
Ivory
White
WS1001I
WS1001W
WS1001NI
WS1001NW
—
—
—
—
Note: See pages E-17 and E-18 for coverage patterns and technical specifications.
DT2000W
Digital Timer Wall Switch
Description
Color
Catalog Number
Dip switch enabled preset intervals, user adjustable up to 4 hours,
3-way capable, 960W @ 120V AC and 1200W @ 277V AC.
Includes an on/off momentary push button switch feature
White
DT2000W
Count Down Timer Wall Switch
DT5030W
ACIPE
AWSG
E-6
ACMG
AWMG
Description
Color
30 Minutes:
Off, 5, 10, 20, 30
60 Minutes:
Off, 15, 30, 45, 60
12 Hours:
Off, 2, 4, 8, 12
1000W @ 120V AC and
1400W @ 277V AC
Ivory
Light Almond
White
DT5030I
DT5030LA
DT5030W
DT5060I
DT5060LA
DT5060W
DT5012I
DT5012LA
DT5012W
Ceiling Accessories
Wall Accessories
Description
Catalog Number
Description
Catalog Number
Ceiling sensor infrared
NEMA 4X enclosure
ACIPE
Wall switch wire guard
AWSG
Ceiling mount wire guard
ACMG
Wall mount wire guard
AWMG
Ceiling mount raceway adapter
ACMRA
®
Wiring Device-Kellems
www.hubbell-wiring.com
H-MOSS® Controls
Ceiling Sensors
Featuring Adaptive Technology
Adaptive Technology
• Adaptive technology - “Install and forget”
• All digital sensing technology
• Photocell for daylight harvesting and relay to
interface with auxiliary systems such as
HVAC (CRP models)
• Mounting base included with sensor
• Non-volatile memory settings retained
after power outage
• Low voltage units: 24V DC, 33mA
• Line voltage units: 20A, 120-277V
• 32kHz (ATD/ATU500C and CRP - 40kHz)
• cULus
ATD2000C
Series
Dual (Ultrasonic and Passive Infrared)
Combines the excellent minor motion detection of ultrasonic with the outstanding passive infrared
(PIR) long-range major motion detection.
Description
Coverage
Color
Catalog Number
Low voltage sensor with photocell and isolated relay
Low voltage sensor
Line voltage sensor
2000 sq. ft. (360°)
2000 sq. ft. (360°)
2000 sq. ft. (360°)
White
White
White
ATD2000CRP
ATD2000C
ATD2000CL
Low voltage sensor with photocell and isolated relay
Low voltage sensor
Line voltage sensor
1000 sq. ft. (180°)
1000 sq. ft. (180°)
1000 sq. ft. (180°)
White
White
White
ATD1000CRP
ATD1000C
ATD1000CL
Low voltage sensor with photocell and isolated relay
Low voltage sensor
500 sq. ft. (180°)
500 sq. ft. (180°)
White
White
ATD500CRP
ATD500C
ATD1000C/
ATD500C
Series
Note: Low voltage ATD ceiling sensors must use a CU series control units. See page E-8 for details.
See pages E-19 and E-20 for coverage patterns and technical specifications.
Ultrasonic
Excellent minor motion detection.
Description
Coverage
Color
Catalog Number
Low voltage sensor with photocell and isolated relay
Low voltage sensor
Line voltage sensor
2000 sq. ft. (360°)
2000 sq. ft. (360°)
2000 sq. ft. (360°)
White
White
White
ATU2000CRP
ATU2000C
ATU2000CL
Low voltage sensor with photocell and isolated relay
Low voltage sensor
Line voltage sensor
1000 sq. ft. (180°)
1000 sq. ft. (180°)
1000 sq. ft. (180°)
White
White
White
ATU1000CRP
ATU1000C
ATU1000CL
Low voltage sensor with photocell and isolated relay
Low voltage sensor
500 sq. ft. (180°)
500 sq. ft. (180°)
White
White
ATU500CRP
ATU500C
Note: Low voltage ATU ceiling sensors must use a CU series control units. See page E-8 for details.
See pages E-19 and E-20 for coverage patterns and technical specifications.
ATU2000C
Series
ATU1000C/
ATU500C
Series
Passive Infrared
Outstanding long range major motion detection.
Description
Coverage
Color
Catalog Number
Low voltage sensor with photocell and isolated relay
Low voltage sensor
Line voltage sensor
1500 sq. ft. (360°)
1500 sq. ft. (360°)
1500 sq. ft. (360°)
White
White
White
ATP1500CRP
ATP1500C
ATP1500CL
Low voltage sensor with photocell and isolated relay
Low voltage sensor
Line voltage sensor
450 sq. ft. (360°)
450 sq. ft. (360°)
450 sq. ft. (360°)
White
White
White
ATP600CRP
ATP600C
ATP600CL
Note: Low voltage ATP ceiling sensors must use a CU series control units. See page E-8 for details.
See pages E-19 and E-20 for coverage patterns and technical specifications.
ATP1500C/
ATP600C
Series
Low Profile, Line Voltage Passive Infrared (PIR)
Outstanding long range major motion detection in a compact low profile housing.
Voltage
Coverage
Load Rating
Color
Catalog Number
120-347V AC
with photocell
and isolated relay
1500 sq. ft.
800W Inc. 1000W Fl. @ 120V AC
1800W Fl. @ 277V AC
2200W Fl. @ 347V AC
White
LVPR1500R
www.hubbell-wiring.com
LVPR1500R
®
Wiring Device-Kellems
E-7
H-MOSS® Controls
Wall Mount Sensors
Line Voltage and Low Voltage
Adaptive Technology Wall Mount Sensors
• Adaptive technology - “Install and forget” operation
• Swivel mounting bracket included for wall or
ceiling mounting
• All digital sensing technology
ATD1600W
Series
• Photocell for daylight harvesting and relay
interface with auxiliary systems such as
HVAC (RP models)
• 24V DC, 33mA
• cULus
Dual (Ultrasonic and Passive Infrared)
Description
Coverage
Color
Catalog Number
Low voltage sensor 32kHz with photocell and isolated relay
Low voltage sensor 32kHz
1600 sq. ft.
1600 sq. ft.
White
White
ATD1600WRP
ATD1600W
Description
Coverage
Color
Catalog Number
Low voltage sensor with photocell and isolated relay
1600 sq. ft.
1600 sq. ft.
120 linear ft.
White
White
White
ATP1600WRP
ATP1600W
ATP120HBRP
120 linear ft.
White
ATP120HB
Passive Infrared
ATP1600W,
ATP120HB
Series
Low voltage sensor for aisle and high bay applications,
with photocell and isolated relay
Low voltage sensor for aisle and high bay applications
Note: All wall mount sensors must use a CU series control units. See below for details.
See pages E-19 and E-20 for coverage patterns and technical specifications.
Accessories
Control Units
The CU300 series provides 24V DC power supply for sensors or sensor/Add-A-Relay combinations
The control units contain an internal relay for the control of an external lighting load. Control units are
plenum rated cULus Listed.
CU300A(M),
CU347A
CU300HD
Description
Catalog Number
Automatic-on operation, 120/277V AC, 50/60Hz for use with 1 to 4 ATD, ATU and ATP series
ceiling/wall mount sensors
Manual-on operation, 120/277V AC, 50/60Hz for use with 1 to 4 ATD, ATU and ATP series
ceiling/wall mount sensors
Auto or manual-on operation, 120/277V AC, 50/60Hz for use with 1 to 6 ATD, ATU and
ATP series ceiling/wall mount sensors, heavy duty latching relay for reactive loads and
plug-load control
Automatic-on operation, 347V AC, 60Hz, for use with 1 to 3 ATD, ATU and ATP series
ceiling and wall mount sensors
CU300A
CU300M
CU300HD
CU347A
Note: See page E-25 for technical specifications.
Add-A-Relay
Hubbell AAR Add-A-Relay contains an internal relay for control of an external lighting load. The AAR
requires a 24V DC power supply from the Hubbell CU series control unit. The AAR is typically used
when: 1. It is desired to switch more than one circuit when occupancy is sensed. 2. The lighting load
exceeds the maximum rating of the control unit.
AAR
Description
Catalog Number
For use with CU series control units and Hubbell ATD, ATU and ATP series ceiling
and wall mount sensors
AAR
Low Voltage Switches
• Attractive, architectural design
• Available latching or momentary contact
Description
Color
Catalog Number
Low voltage switch, latching, 1 button
Ivory
White
Ivory
White
Ivory
White
DSL30I1
DSL30W1
DSM30I1
DSM30W1
DSM30I2
DSM30W2
Low voltage switch, momentary, 1 button
Low voltage switch, momentary, 2 button
DSL30W1
E-8
• Mounts to standard single gang box
• 2-year warranty
Note: Wallplate sold separately.
®
Wiring Device-Kellems
www.hubbell-wiring.com
H-MOSS® Controls
OPTIMYZER® High Bay Controls and Daylight Harvesting
Multi-Level Relays
Description
Catalog Number
Enclosed independent control for multiple ballast light fixtures from one existing wall switch,
bi-level; 120/208-277V AC
AARBL2
Enclosed independent control for multiple ballast light fixtures from one existing wall switch,
tri-level; 120/208-277V AC
AARBL3
AARBL2
Enclosed 10 Amp SPDT Relays
Description
Catalog Number
Enclosed relay 10 Amp SPDT with 10-30V AC/DC/120V AC coil
AAR10C120
Enclosed relay 10 Amp SPDT with 10-30V AC/DC/208-277V AC coil
AAR10C277
AAR10C277
OPTIMYZER® High Bay Controls
•
•
•
•
Digital passive infrared (PIR) sensor
Multiple (single and dual) output versions
Single and dual timer operation
Low-profile design
•
•
•
•
Supports mounting heights up to 40 ft
Area and aisle coverage
Universal voltage (120/277/347V AC) models available
No minimum load
Standard
Description
Voltage
Catalog Number
Fluorescent high bay PIR sensor, 1 relay
120-347V AC
HMHB21U
Fluorescent high bay PIR sensor, 2 relays
120-347V AC
HMHB22U
Fluorescent high bay PIR sensor, 1 double pole relay
208/240V AC
HMHB23A
Fluorescent high bay PIR sensor, 1 double pole relay
480V AC
HMHB23B
Fluorescent high bay PIR sensor
24V DC
HMHB2LV*
HMHB21U
Daylight Harvesting (With Photocells)
Description
Voltage
Catalog Number
Fluorescent high bay PIR sensor, 1 relay with photocell
120-347V AC
HMHB21UP
Fluorescent high bay PIR sensor, 2 relays with photocell
120-347V AC
HMHB22UP
Fluorescent high bay PIR sensor, 1 double pole relay with photocell
208/240V AC
HMHB23AP
Fluorescent high bay PIR sensor, 1 double pole relay with photocell
480V AC
HMHB23BP
Fluorescent high bay PIR sensor with photocell
24V DC
HMHB2LVP*
See pages E-20 for coverage patterns and technical specifications.
HMHBSA
OPTIMYZER® Accessories
Description
Catalog Number
High bay mounting extension adapter
HMHBSA
External daylight control
HMHBEP
Daylight Harvesting
• Multiple calibration options
• Selectable 3- or 8-second dimming rate
• Low-profile design
• Light-sensitivity range of 0–500 foot candles
Description
Voltage
Catalog Number
Single zone continuous automatic dimming control
Indoor photocell
Outdoor photocell
Atrium photocell
Skylight photocell
Control module
Daylight tracker with on/off control
Daylight tracker with dimming control
10V DC
24V DC
24V DC
24V DC
24V DC
24V DC
24V DC
24V DC
DHADC†
DHIP
DHOP
DHAP
DHSP
DHCM
DHT*
DHTD†
Note: *For use with CU series control units. See page E-10 for details.
†For use with 0-10V DC dimming ballasts.
For use with DHCM and CU series control units.
www.hubbell-wiring.com
DHADC
DHIP, DHOP
DHAP, DHSP
DHCM
DHT
®
Wiring Device-Kellems
E-9
H-MOSS® Controls
H-MOSS®|MAXX™ Harsh Environment Occupancy Sensors
Features and Benefits
H-MOSS®|MAXX™ products provide users with methods to reduce energy usage in harsh environments. These applications
often have lights being left on and ventilation/HVAC systems constantly working. H-MOSS®|MAXX™ products are designed
to withstand these challenging environments and provide increased operating efficiency.
½" threaded nipple
(HAP4)
IP66, NEMA 4X,
outdoor rated
Multiple mounting kits for
existing work boxes and hubs;
pendent or wall mounting
flexibility
Photocell makes sure
lights stay off when there
is sufficient daylight
Isolated relay provides
signalling to HVAC and
ventalation systems
Integrated lens guard protects
against accidental damage
Stainless steel hardware
and settings access cover
Housing manufactured from
chemical resistant Valox®
AHP1600WRP
with HAP4
Fixture or work box mounting
with ½" threaded nipple
IP65, NEMA 3R watertight,
and outdoor rated
Digital passive infrared
(PIR) sensor
Two photocells for daylight
harvesting
Supplied with 360º lens; aisle,
end-of-aisle and 180º lenses
available separately
HMHB21UPCW
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
E-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
H-MOSS® Controls
H-MOSS®|MAXX™ Harsh Environment Occupancy Sensors
Ordering Information
Outdoor Rated Watertight Wall Mount PIR Sensor
IP66, NEMA 4X, heavy duty wall or pendant mount sensor with -40°F to 149°F (-40°C to 65°C) operating
temperature range and 160° of coverage.
Description
Voltage
Catalog Number
PIR sensor, with isolated relay and photocell
24V DC
AHP1600WRP
Adaptor plate for 1-gang FS boxes
—
HAP1
Adaptor hub and nipple for Killark NJ series boxes
—
HAP2
Adaptor plate for Killark NV series boxes
—
HAP3
½" NPT threaded hub
—
HAP4
Note: For use with a CU series control unit: CU300HD (120/277V AC, 50/60 Hz), CU347A (347V AC, 60 Hz).
See pages E-21 for coverage patterns and technical specifications.
AHP1600WRP
Extreme Temperature PIR Ceiling Sensor
Upgraded ceiling sensor with -40°F to 149°F (-40°C to 65°C) operating temperature range.
Use ACIPE to make NEMA 4X watertight.
Description
Voltage
Catalog Number
PIR sensor, with isolated relay and photocell
24V DC
AHP1500CRP
IP66, NEMA 4X enclosure
ACIPE
—
Note: For use with a CU series control unit: CU300HD (120/277V AC, 50/60 Hz), CU347A (347V AC, 60 Hz).
See pages E-21 for coverage patterns and technical specifications.
ACIPE with
AHP1500CRP
Heavy Duty Control Unit
Robust latching relay provides reliable performance over many different applications, including plug
loads. 20A 100-277V AC, 1HP @ 120V, 2HP @ 240/277V. Auto or Manual-On operation. Powers up to
six low voltage sensors.
Description
Voltage
Catalog Number
Heavy duty control unit
120-277V AC
CU300HD
CU300HD
Note: See page E-25 for technical specifications.
Watertight OPTIMYZER®
IP65, NEMA 3R, outdoor rated, -40°F to 149°F (-40°C to 65°C) operating temperature range.
Description
Voltage
Catalog Number
Pir sensor, relay with photocell
120-347V AC
HMHB21UPCW
Pir sensor, 2 relays with photocell
120-347V AC
HMHB22UPCW
Pir sensor, 1 double pole relay with photocell
208, 240V AC
HMHB23APCW
Pir sensor, 1 double pole relay with photocell
480V AC
HMHB23BPCW
Pir sensor, with photocell
24V DC
HMHB2LVPCW*
180° Lens
—
HMHBL180
360° Lens (included)
—
HMHBL360
Aisle lens
—
HMHBLA
End of aisle lens
—
HMHBLEA
HMHB21UPCW
Note: *For use with a CU series control unit: CU300HD (120/277V AC, 50/60 Hz), CU347A (347V AC, 60 Hz).
See pages E-21 for coverage patterns and technical specifications.
www.hubbell-wiring.com
®
Wiring Device-Kellems
E-11
H-MOSS® Controls
WL-Series Wireless Sensors and Controls
Features and Benefits
Three operation modes available:
Auto-On, Auto-On Low-Light
and Manual-On
Passive infrared motion detection
with advanced digital signal
processing for fine motion
detection
Lens illuminates during
test mode to verify
coverage
Adjustments available
for Timeout, Activity,
and Auto-On settings
Auto-On Low-Light feature will
only turn lights on automatically
if there is less than approximately
10 Lux (1 fc) of ambient light
Accessible test buttons
make setup easy
WLP450C
10-year battery life design
LED and CFL compatible
with supplied load adaptor
8A lighting, 3A fan
load capacity
Digital push button
operation provides user
control
Green LED provides
operation and setup
feedback
Service switch prevents
lights from coming on
during re-lamping
No neutral required,
no leakage to ground
WLS1278W
with NP26W
Clear Connect™ is a registered trademark of Lutron Electronics Co., Inc.
E-12
®
Wiring Device-Kellems
www.hubbell-wiring.com
H-MOSS® Controls
WL-Series Wireless Sensors and Controls
Featuring Passive Infrared Technology
Hubbell’s WL-Series Wireless Sensors and Controls are the ideal solution for renovation projects aimed at reducing energy
consumption. These sensors use DSP Enhanced passive infrared technology to detect movement of heat from people to turn
lights on when a room is occupied and off when vacant. The sensors wirelessly transmit Clear Connect™ commands to the
associated control devices, reducing the need for additional wiring for ease and speed of installation and energy savings.
• Eliminates need to run extra wires
• Supports highly reconfigured spaces
• Complete projects quickly
• Helps manage energy consumption
Wireless Ceiling and Wall
Mount Sensors
Wireless
Wall Switches
Wireless Wall
Mount Sensor
Wireless
Daylight Sensor
Wireless Ceiling Mount Sensor
Description
Color
Catalog Number
Ceiling mount 360° / 324-676 ft2
White
WLP450C
Wireless Wall Mount Sensor
WLP450C
• Detection at longer distances is best when motion occurs at right angles to the sensor
• Multiple sensors can be used to extend coverage
• Mount Hallway Sensor at the end of a hallway with a clear view down the length of a hall
Description
Wall mount
180° / 3000 ft2
Corner mount
90° / 2500 ft2
Hallway
up to 150 linear ft
Color
White
White
White
Catalog Number
WLP3000W
WLP2500W
WLP150H
Compatible Controls: WSL1278xx switch, WLC316R control unit, or any Lutron Clear Connect enabled control device.
WLP150H
Wireless Wall Switches
Description
Color
Catalog Number
8A Lighting, 3A Fan (1/10 HP motor, 120V only), Spec Grade
Electronic Switch 120–277V. No neutral wire required
Ivory
White
WLS1278I
WLS1278W
Accessory Switch 120V
Ivory
White
WLAS120I
WLAS120W
Accessory Switch 277V
Ivory
White
WLAS277I
WLAS277W
WLS1278I
Compatible Transmitters: WLP series and WLDH sensors any Lutron Clear Connect enabled sensor.
WLAS277W
Wireless Control Unit
Description
Catalog Number
Wireless load control unit with isolated relay, 16A, 120V or 277V AC
WLC316R
Compatible Transmitters: WLP series and WLDH sensors any Lutron Clear Connect enabled sensor.
WLC316R
Wireless Daylight Sensor
Description
Color
Catalog Number
Daylight sensor 0–107,000 Lux (0-10,000 fc)
White
WLDH
Compatible Controls: WSL1278xx switch, WLC316R control unit, or any Lutron Clear Connect enabled control device.
Note: See pages E-22 to E-24 for coverage patterns and technical specifications.
WLDH
Clear Connect™ is a registered trademark of Lutron Electronics Co., Inc.
www.hubbell-wiring.com
®
Wiring Device-Kellems
E-13
H-MOSS® Controls
Plug Load Control Products for ASHRAE and CEC Title 24 Compliance
System Overview / Methods for Complaince
ASHRAE 90.1-2010 mandates that 50% of all outlets in private offices, open offices, and
computer classrooms must be automatically controlled by occupancy or time based schedules.
This also includes outlets in modular furniture. Hubbell provides solutions for compliance that are
cost effective and installer friendly. Bellow are two examples. Additional examples and design
resources are located at www.hubbell-wiring.com/energy.aspx
Wired
Utilizing low voltage wiring provides installers with a familiar method of wiring and installation.
Specify CU300HD to control outlets and use AAR or CU300A to control the lighting. Utilize
alternating outlet or split receptacle wiring as required to control at least 50% of the outlets
in the space.
CU300HD
DR20LA
Controlling 50%
of Outlets
CU300xx
Not used
Shown with adhesive label
to denote the device is being
automatically controlled.
Labels provided with each
plug load control unit.
X
Wireless
Wireless communication takes complexity out of retrofit and difficult installations by eliminating low
voltage wires running between lighting and receptacle control units. This gives installers flexibility
to quickly deploy, add additional devices, and configure and re-configure the system as needed.
Hubbell’s WL series controls utilize Lutron’s proven Clear Connect™ communication and are
compatible with other Clear Connect™ devices, such as Hubbell’s wireless occupancy sensors.
WLC301
Controlling 50%
of Outlets
WLCU301
Clear Connect™ is a registered trademark of Lutron Electronics Co., Inc.
E-14
®
Wiring Device-Kellems
www.hubbell-wiring.com
H-MOSS® Controls
Plug Load Control Products for ASHRAE and CEC Title 24 Compliance
Control Units
Hubbell Plug Load Control Products
• Wired or wireless flexibility
• UL/cUL 916 listed for energy management equipment
• Listed for 20A enclosed switching
• Heavy duty 60A rated mechanical latching relay;
silver alloy contacts
• Zero cross switching
• Expanded operating temperature range
• 24V DC, 250mA DC power output on applicable units
• Low voltage output short circuit protection
• UL2043 plenum rated except WLC402
• Controlled outlet labels provided with control units
Wired
Heavy Duty Control Unit
Robust latching relay provides reliable performance over many different applications, including plug
loads. 20A 100-277V AC, 1HP @ 120V, 2HP @ 240/277V. Auto or manual-on operation. Power up to
six low voltage sensors.
Description
Voltage
Catalog Number
Heavy duty control unit
100-277V AC
CU300HD
CU300HD
Note: See page E-25 for technical specifications.
Wireless
Operates in a “quiet” 434MHz FCC band. Communication range: 30 ft obstructed or 60 ft
line of sight
Heavy Duty Control Unit with Wireless Transmit
CU300HD with functionality of WLCA integrated to wirelessly activate additional load control units.
Takes the place of CU300A's normally used to control just lighting. 20A 100-277V AC, 1HP @ 120V,
2HP @ 240/277V. Auto or manual-on operation. Power up to six low voltage sensors.
Description
Voltage
Catalog Number
Heavy duty control unit with Clear Connect
100-277V AC
WLCU301
WLCU301
Wireless Status Transmitter
Low voltage powered unit transmits occupancy or timer status to associated load control receivers.
Use with CU300xx and low voltage sensors/timers to upgrade existing lighting control systems to
support plug load control.
Description
Voltage
Catalog Number
Wireless transmitter with Clear Connect, for use with CU300xx
24V DC
WLCA
WLCA
Heavy Duty Load Control Units with Wireless Receive
These units receive wireless Clear Connect™ commands to turn on and off power to downstream loads.
Utilize these control units to wirelessly switch a circuit of receptacles or any other applicable load.
20A 100-277V AC, 1HP @ 120V, 2HP @ 240/277V.
Description
Voltage
Catalog Number
1 - Circuit heavy duty control unit with Clear Connect
100-277V AC
WLC301
2 - Circuit heavy duty control unit with Clear Connect
100-277V AC
WLC302
WLC301
Furniture Feed Box with Heavy Duty Relays and Wireless Receive
Furniture feed box receives wireless Clear Connect™ commands and controls 2-circuits in furniture
electrical feeds. It supports wall mounting to existing 1 or 2-gang junction boxes. Additionally, the box
can be secured to the furniture or on the floor. 20A 100-277V AC, 1HP @ 120V, 2HP @ 240/277V.
Description
Voltage
Catalog Number
2 - Circuit heavy duty furniture freed box with
Clear Connect
100-277V AC
WLC402W
Note: See page E-26 for technical specifications.
WLC402W
Clear Connect™ is a registered trademark of Lutron Electronics Co., Inc.
www.hubbell-wiring.com
®
Wiring Device-Kellems
E-15
H-MOSS® Controls
Specifications and Wiring Schematics
Dual Technology and Ultrasonic Wall Switches
Adaptive Dual Technology Wall Switches
AD2000 Series
Adaptive Technology Ultrasonic and PIR Wall Switches
AP2000 and AU2000 Series
Electrical
Electrical
Power Supply
Load Capacity
Incandescent
120V AC Ballast
277V AC Ballast
Agency Approvals
120/277V AC, 50/60Hz
Power Supply
Load Capacity
Incandescent
120V AC Ballast
277V AC Ballast
Agency Approvals
0 to 800 watts
0 to 1000 watts
0 to 1800 watts
cULus Listed
Physical
120/277V AC, 50/60Hz
0 to 800 watts
0 to 1000 watts
0 to 1800 watts
cULus Listed
Physical
Housing
Lens
Dimensions
Mounting Height
High impact plastic (UL-94-5V)
Dual element pyrometer and 12 element
cylindrical hard lens
Face 2.59"H x 1.73"W, 0.37"D (from wall out)
42 to 54 inches above floor
Housing
Lens
Dimensions
Mounting Height
Environmental
High impact plastic (UL-94-5V)
Dual element pyrometer and 12 element
cylindrical hard lens (AP2000 only)
Face 2.59"H x 1.73"W, 0.37"D (from wall out)
42 to 54 inches above floor
Environmental
Operating
32°F to 104°F (0°C to 40°C);
0% to 95% non-condensing relative humidity
Operating
Controls
32° F to 104°F (0°C to 40°C);
0% to 95% non-condensing relative humidity
Controls
Time Delay
Ambient Light
Front Press Switch
Sensitivity
Service Switch
Digital, adaptive 4 to 30 minutes
Adjustable ambient light override, 10 to 500
foot candles
Auto/Off
Adaptive 0% to 100%
Air gap off
Time Delay
Ambient Light
Front Press Switch
Sensitivity
Service Switch
Passive Infrared
Red LED
Sensing Indicator
Ultrasonic
Green LED
Passive Infrared
Red LED (AP series only)
Ultrasonic
Green LED (AU series only)
Sensing Indicator
Digital, adaptive 4 to 30 minutes
20 minutes default
Adjustable ambient light override, 10 to 500
foot candles
Auto/Off
Adaptive 0% to 100%
Air gap off
Wiring Schematic AD, AU, AP, 1277/2000 Series Wall Switch Sensors
Single Circuit Wiring
120/277V AC
Black
Red
Dual Circuit Sensor, Wired for Dual Circuits
Dual Circuit Sensor, Wired for Single Circuit
Line circuit 1
120/277V AC
Black
Red
Load 1
Black
Green
Ground
Violet
Blue
Load 2
Blue
Line circuit 2
120/277V AC
Single Circuit Sensors, Wired as 3-Way Sensors*
Green
Lighting
Load A
Hot
Black
Load 1
For step dimming,
bi-level, and dual
ballasted fixtures
Green
Ground
Line circuit
120/277V AC
Green
Ground
Ground
Neutral
Red
Load 1
Violet
Load 2
Dual Circuit Sensors, Wired as 3-Way Sensors*
Green
Ground
Neutral
Hot
Lighting
Load A
Black
Red
Red
Blue
Violet
Lighting
Load B
Note: *Load can not exceed the rating of one switch.
Sensor is shipped with all dip switches in the OFF position (factory default).
E-16
®
Wiring Device-Kellems
www.hubbell-wiring.com
H-MOSS® Controls
Coverage Patterns
Wall Switches Coverage Patterns
Minor Motion:
Ultrasonic
Major Motion:
PIR
Ultrasonic
PIR
26'
21'
28'
28'
21'
29'
24'
14.5'
24'
28'
28'
14.5'
50'
26'
50'
AU2000 Series
AD2000 Series
AP2000 Series
Wall Switches Coverage Patterns
Minor Motion:
10'
(3.0m)
PIR
Major Motion:
20'
(6.1m)
29"
(73.3cm)
14.5"
(36.8cm)
PIR
16'
3.5º
3.5º
Mounting Height
42" to 54"
(106.7 to 137.2cm)
See Horizontal
View for Range
16'
40'
Vertical Coverage
AT1277 Series
AT1277 Series
16'
12'
12'
16'
Mounting Height
48" (121.9 cm)
20' (6.1m)
40' (12.2m)
Vertical Coverage
ATP2000, WS2000 Series
www.hubbell-wiring.com
20'
40'
ATP2000, WS2000 Series
®
Wiring Device-Kellems
E-17
H-MOSS® Controls
Specifications and Wiring Schematics
Passive Infrared Wall Switches
Adaptive Technology PIR Wall Switches
AT1277 Series
Adaptive Technology PIR Wall Switches
ATP2000, WS2000 and WS1000 Series
Electrical
AT1277 Series
Power Supply
Load Capacity
120V AC
277V AC
Agency Approvals
120/277V AC, 50/60Hz
Electrical
Power Supply
Load Capacity
Incandescent
120V Ballast
277V Ballast
Agency Approvals
Warranty
ATP/WS2000 Series
120/277V AC, 60Hz
WS1000 Series
120V AC, 60Hz
0 to 1000 watts
0 to 1000 watts
0 to 1800 watts
cULus Listed
5 years
0 to 500 watts
0 to 500 watts
N/A
cULus Listed
5 years
Physical
Housing
Lens
Dimensions
Mounting Height
ATP/WS2000 and WS1000 Series
Flame retardant UL 94 V-0 ABS
Polyethylene
Face 2.59"H x 1.30"W, 0.61"D (from wall out)
42 to 54 inches above floor
Environmental
Operating
ATP/WS2000 and WS1000 Series
32°F to 122°F (0°C to 50°C) with rate of change
not exceeding 20°F (11°C) per hour; 20% to 90%
non-condensing relative humidity
-40°F to 150°F (-40°C to 65°C);
20% to 90% non condensing relative humidity
0 to 1800 watts
0 to 4155 watts
UL Listed, cULus Certified
Physical
Housing
Lens
Dimensions
Mounting Height
Flame retardant UL 94 V-0 ABS
Polyethylene
Face 2.61"H x 1.29"W, 0.73"D (from wall out)
42 to 54 inches above floor
Environmental
Operating
32°F to 122°F (0°C to 50°C) with rate of
change not exceeding 20°F
(11°C) per hour; 20% to 90% non-condensing
relative humidity
-20°F to 150°F (-29°C to 65°C);
20% to 90% non condensing relative humidity
Storage
Controls
Storage
Time Delay
Ambient Light
Front Press Switch
Service Switch
Digital, test (15 seconds),
Adaptive 5 to 30 minutes
Digital, pushbutton, 30 to 300 foot candles
Auto/Momentary Off (30 minutes after last
motion, switch returns to automatic mode)
Auto/Off
Sensing Indicators
Passive Infrared
2-color LED (red, green)
Controls
Time Delay
Ambient Light
Front Press Switch
Service Switch
Sensing Indicator
Passive Infrared
ATP/WS2000 Series
ATP: Auto
WS: Manual 20 seconds
to 30 minutes
Digital, pushbutton,
10 to 500 foot candles
On/Off
Off (service)
Vac (manual-on)
Occ (auto-on)
WS1000 Series
Manual 20 seconds to
30 minutes
n/a
On/Off
Off (service)
On (normal operation)
ATP/WS2000 and WS1000 Series
Red LED
Wiring Schematic ATP2000 and WS2000 Series Wall Switches
Sensors Wired as
3-Way Sensors*
Normal Wiring
Neutral
(ATP/WS2000 Only)
White (Neutral
Version Only)
Neutral
Load
White (Neutral Versions Only)
Load
Hot
Red
Black
Black
White
Hot
Yellow
Red
Red
Green
ATP/WS2000
Only
Ground
Green
Green
Yellow
Ground
Note: *Load can not exceed the rating of one switch.
E-18
®
Wiring Device-Kellems
www.hubbell-wiring.com
H-MOSS® Controls
Coverage Patterns
Ceiling Sensors Coverage Patterns
Minor Motion:
Ultrasonic
PIR
Major Motion:
22'
12'
Ultrasonic
12'
32'
23'
PIR
22'
12'
32'
23'
45'
20'
23'
64'
ATD2000C Series
45'
18'
26'
32'
23'
32'
23'
ATD500C Series
32'
64'
23'
45'
23'
18'
32'
23'
32'
20'
ATP1500C Series
64'
23'
14'
ATU1000C Series
ATP600C Series
32'
26'
16'
ATU2000C Series
11'
7'
12'
14'
32'
ATD1000C Series
64'
22'
22'
64'
16'
ATU500C Series
ATU2000C Series
Hallway Application
20'
LVPR1500R(P)
Wall Mount Sensors Coverage Patterns
Minor Motion:
23'
Ultrasonic
32'
PIR
23'
Major Motion:
Ultrasonic
PIR
32'
120'
7'
7'
32'
ATP120HB Series
Top View
32'
23'
23'
30
120'
20
20'
20'
40'
ATD1600W Series
www.hubbell-wiring.com
20'
40'
10
20'
40'
0
40'
Side View
ATP1600W Series
®
Wiring Device-Kellems
E-19
H-MOSS® Controls
Specifications
Ceiling and Wall Mount Sensors
Adaptive Dual Technology, Ultrasonic and Passive Infrared Ceiling and Wall Mount Sensors
ATD, ATU, and ATP Series
Electrical
Power Requirements
Isolated Relay
(sensors with RP suffix)
Agency Approvals
Physical
Housing
Lens
Dimensions
Color
Mounting Height
Physical
Housing
Lens
Dimensions
Color
Mounting Height
Environmental
Operating
Storage
Controls
Time Delay
Ambient Light
Sensitivity
Sensing Indicators
Ultrasonic (ATD and ATU Series)
Passive Infrared (ATD and ATP Series)
24V DC nominal, 33mA from Hubbell CU series control unit
Normally open and normally closed
Terminals available
UL Listed
Ceiling Sensors
Flame retardant UL 94 V-0 ABS
Polyethylene
1.5"H x 4.5"D
Office white
8 to 12 feet
Wall Mount Sensors
Flame retardant UL 94 V-0 ABS
Polyethylene
6"H x 2"W x 1.5"D
Office white
8 to 12 feet, 8 to 30 feet (ATP120HB series)
32°F to 104°F (0°C to 40°C) with rate of change not exceeding 20°F (11°C) per hour;
0% to 95% non condensing relative humidity
-20°F to 150°F (-29°C to 65°C); 0% to 95% non-condensing relative humidity
Test (8 seconds), adaptive 8 to 40 minutes
1 to 1000 foot candles
Adaptive 0 to 100%
Green LED
Red LED
OPTIMYZER® High Bay
HMHB Series
User Interface
Timer time-outs
Passive infrared
Coverage Pattern
2 four-pin dip switches (standard version)
3 four-pin dip switches (photosensor version)
Primary: 8-second test mode – 4, 8, 16 and 30 minute time-outs
Secondary: Can be disabled – 30, 60 and 90 minute time-outs
Size and weight
Size: 4.4 inch x 3.6 inch x 2.0 inch; Weight: 7 oz.
Color
White
Mounting
Mounts directly to the end of a fixture through an extended ½ inch chase
nipple. For deeper body fixtures, an optional Extender Adapter (available
separately) positions the sensor flush or below the bottom of the reflector
for a full field of view
cULus Listed
E-20
PIR
Major Motion:
PIR
Dual element pyrometer and spherical Fresnel lens
Photosensor Range 50 to 3000 foot candles, set point adjustable
(Photosensor version only)
Coverage
360° (includes masking kit for aisle and end-of-aisle applications).
Lens: Below 30 ft: 1.4 – 42 ft radius; mounted @ 30 ft; up to 45 ft: 1.1 49.5 ft radius; mounted @ 45 ft
120V AC: 0 to 800 watts watts
480V AC: 0 to 2400 watts ballast
Load ratings
277V AC: 0 to 1200 watts ballast ¼-HP motor load @ 120V AC,
(line voltage units)
347V AC: 0 to 1500 watts ballast 1/6 HP @ 347V
208/240V AC: 0 to 1200 watts ballast
Operating environment Operating temperature: (standard version) 32°F to 149°F (0°C to 65°C);
(Indoor use only)
Relative humidity (non-condensing): 0% to 95%
Construction
Casing: High-impact injection-molded thermoplastic
Certifications
Minor Motion:
®
Wiring Device-Kellems
H = 0' to 30'
R1 = 1.4 x H
R1
H = 30' to 45'
R2
R2 = 1.1 x H
www.hubbell-wiring.com
H-MOSS® Controls
Specifications
Ceiling and Wall Mount Sensors
HMHBxxUPCW Series
Coverage Pattern
User Interface
2 four-pin dip switches (standard version)
3 four-pin dip switches (photosensor version)
Timer time-outs
Primary: 8-second test mode 4, 8, 16 and 30 minute time-outs
Secondary: Can be disabled 30, 60 and 90 minute time-outs
Passive infrared
Dual element pyrometer and spherical Fresnel lens
Minor Motion:
Major Motion:
PIR
PIR
50 to 3000 foot candles, set point adjustable
Photosensor Range
(Photosensor version only)
Coverage
360° (includes masking kit for aisle and end-of-aisle applications)
Lens: Below 30 ft: 1.4 – 42 ft radius; mounted @ 30 ft.; Up to 45 ft.:
1.1 - 49.5 ft. radius; mounted @ 45 ft.
Load ratings
(line voltage units)
120V AC: 0 to 800 watts ballast or tungsten
277V AC: 0 to 1200 watts ballast
347V AC: 0 to 1500 watts ballast
208/240V AC: 0 to 1200 watts ballast
480V AC: 0 to 2400 watts ballast
¼-HP motor load @ 120V AC, 1/6 HP @ 347V
H = 0' to 30'
Operating environment
(Indoor use only)
Operating temperature: (standard version) 32°F to 149°F (0°C to
65°C); (low temperature version): -40°F to 149°F (-40°C to 65°C)
Relative humidity (non-condensing): 0% to 95%
Construction
Casing: High-impact injection-molded thermoplastic
Size and weight
Size: 4.4 inch x 3.6 inch x 2.0 inch; Weight: 7 oz.
Color
White
Mounting
Mounts directly to the end of a fixture through an extended ½ inch
chase nipple. For deeper body fixtures, an optional Extender
Adapter (available separately) positions the sensor flush or below
the bottom of the reflector for a full field of view
Certifications
ETL, Conforms to UL STD 916, Certified to CAN/USA STD 22.2
No. 61010-1-04 and Title 24 Certified
Warranty
5 year limited
H = 30' to 45'
R2
Harsh Environment Passive Infrared Ceiling and Wall Mount Sensors
AHP Series
Electrical
Power Requirements
Isolated Relay
(sensors with RP suffix)
Agency Approvals
Physical
Housing
Protection
Lens
Dimensions
Color
Mounting Height
Physical
Housing
Protection
Lens
Dimensions
Color
Mounting Height
Environmental
Operating
32'
23'
Controls
Time Delay
Ambient Light
Sensitivity
Sensing Indicators
Passive Infrared
Valox®
23'
23'
45'
23'
PIR
20'
40'
40'
AHP1600WRP
12'
20'
Test (8 seconds), adaptive 8 to 40 minutes
1 to 1000 foot candles
Adaptive 0 to 100%
Red LED 64'
Major Motion:
PIR
32'
20'
12'
-40°F to 149°F (-40°C to 65°C) with rate of change
not exceeding 20°F (11°C) per hour;
0% to 95% non condensing relative
32' humidity
R2 = 1.1 x H
Coverage Pattern
Minor Motion:
24V DC nominal, 33mA from Hubbell CU series control unit
Normally open and normally closed
Terminals available
cULus Listed
Ceiling Sensor
Flame retardant UL 94 V-0 ABS
NEMA 4X, when used with ACIPE
32'
Polyethylene
23'
1.5"H x 4.5"D
Office white
8 to 12 feet
Wall Mount Sensor
Flame retardant UL 94 V-0 Valox®
NEMA 4X, IP66, outdoor use rated
Polyethylene
6"H x 2"W x 1.5"D
Gray
22'
22'12 feet
8 to
12'
R1 = 1.4 x H
R1
22'
12'
11'
7'
14'
18'
26'
32'
22'
AHP1500CRP
is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
E-21
H-MOSS® Controls
Coverage Patterns
WL-Series Wireless Sensors
Wireless Ceiling Mount Sensor Coverage Patterns
Top View
Side View
8'
7'
6'
12'
11'
WLP450C
Sensor Coverage Chart (for sensor mounted in center of room)
Ceiling height Maximum room dimensions for complete floor coverage*
8 ft (2.4 m)
18 ft x 18 ft (5.5 m × 5.5 m)
324 ft2 (30.2 m2)
9 ft (2.7 m)
20 ft x 20 ft (6.1 m × 6.1 m)
400 ft2 (37.2 m2)
10 ft (3.0 m)
22 ft x 22 ft (6.7 m × 6.7 m)
484 ft2 (44.9 m2)
12 ft (3.7 m)
26 ft x 26 ft (7.9 m × 7.9 m
676 ft2 (62.4 m2)
Note: * 12 ft (3.7 m) is the recommended maximum mounting height
Wireless Wall Mount Sensor Coverage Patterns
Top View
Corner Mount Coverage Patterns
Top View
25'
18'
50'
35'
0'
18'
25'
50'
60'
Side View
Side View
50'
60'
7
50'
7
35'
0
0
WLP3000W
WLP2500W
Note: *Sensor mounting shown at 7 ft (2.1 m). Mounting height should be between 6 and 8 ft (1.6 and 2.4 m).
Clear Connect™ is a registered trademark of Lutron Electronics Co., Inc.
E-22
®
Wiring Device-Kellems
www.hubbell-wiring.com
H-MOSS® Controls
Coverage Patterns
WL-Series Wireless Sensors
Wireless Hallway Sensor Coverage Patterns
Top View
150'
10'
Side View
150'
7'
0
WPL150H
Sensor Coverage Chart (Hallway)
Width of Hall
Length of Hall
6 ft (1.0 m) or less
50 ft (15.2 m)
8 ft (2.4 m)
100 ft (30.5 m)
10 ft (3.0 m) or more
150 ft (45.7 m)
Note: *Sensor mounting shown at 7 ft (2.1 m). Mounting height
should be between 6 and 8 ft (1.6 and 2.4 m).
Specifications
Electrical
Operating voltage: 3V
Operating current: 14 μA nominal
10-year battery life design
Supplied with one CR 123 lithium battery
Non-volatile memory (saved changes are stored during power loss)
Construction
High impact, UL 94-5V plastic
Operating Environment
Indoor use only
Operating temperature: 32˚F to 104˚F (0˚C to 40˚C)
Range
RF range is 30 ft (10m) obstructed, 60 ft (18m) line of sight
Sensor Coverage Test
Dedicated test button
Lens illuminates orange in response to motion during test mode
Wireless Communication Test
Dedicated test button; Turn associated loads on and off
Time Out Options
1 minute (intended for use in high-activity, briefly occupied areas only); 5 minutes;
15 minutes (default setting); 30 minutes
Auto-On Options
“Enabled” – Sensor turns lights ON and OFF automatically – default setting
“Disabled” – Lights must be turned ON manually from a switching device
Sensor turns lights OFF automatically
Sensitivity Options
Low Activity (default setting); Medium Activity; High Activity
Certifications
cULus Listed, FCC Certified, IC Certified
Meets CA (USA) Energy Commission Title 24 requirements
Warranty
1 year
Clear Connect™ is a registered trademark of Lutron Electronics Co., Inc.
www.hubbell-wiring.com
®
Wiring Device-Kellems
E-23
H-MOSS® Controls
Specifications and Wiring Schematics
WL-Series Wireless Load Controls
Range Diagram
Electrical
Operating voltage: 120/277V, 50/60Hz
LED status indicator: displays load status and provides programming feedback
Power failure memory: (Relay returns to previous level prior to interruption)
Output is non-latching
Indoor use only
Ambient operating temperature: 32°F to 131°F (0°C to 55°C);
Relative humidity: 0% to 90% humidity, non-condensing
Maximum load: 16A general purpose. No minimum
Motor rating: 0.5 HP (120V AC), 1.5 HP (277V AC)
Normally open (NO) and normally closed (NC) dry contacts
Maintained latching output
The isolated relay is not rated to control unclamped, inductive loads.
Inductive loads include, but are not limited to relays, solenoids and motors.
To control these types of equipment
RF range is 30 ft (10m) obstructed, 60 ft (18m) line of sight
Operating
Environment
Load
Isolated Relay
Range
Certifications
UL Listed, UL 2043 Plenum Rated, FCC Approved. Complies with the limits
for a Class B device, pursuant to Part 15 of the FCC rules. CSA and IC
Warranty
1 year
Install in center of room to
maximize RF coverage.
Wireless
Occupancy
Sensor
30 ft (10 m)
Wireless Control Unit (WLC316R)
30 ft (10 m)
Maximum
Wireless Transmitter
must be installed within
30 ft (10 m) of the
load control unit.
40 ft (12 m)
Line of sight distance
60 ft (18 m)
Contact Hubbell first for applications
using foil-backed or metallic ceiling tiles.
Contact Hubbell first for applications using foil-backed or metallic ceiling tiles.
Wireless Wall Switch (WLS1278 Series)
Electrical
Operating voltage: 120/277V, 50/60Hz
Green indicator light
Operating
Environment
Wire Size
Capacity
Indoor use only
Ambient operating temperature: 32°F to 104°F (0°C to 40°C),
Relative humidity: 0% to 90% humidity, non-condensing
#20 to 16 AWG (0.5 to 1.5mm2) solid or stranded wire
Up to 9 WLAS accessory switches can be configured to work together with one WLS1278
Range
RF range is 30 ft (10m) obstructed, 60 ft (18m) line of sight
Certifications
UL Listed, CSA Certified, FCC Approved
Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules
1 year
Warranty
Wiring Diagram - Wireless Wall Switch (WLS1278 Series)
Single Location Installation
WLS1278xx*
Switch
Blue - unused, tighten1
Brass
120V
50/60 Hz
or
277V
50/60 Hz
Note: *The included LUT-MLC ensures proper function when ffl luorescent, CFL,
or LED loads are used. Install the LUT-MLC inside a load fixture or in a
separate J-box of the circuit.
1 When using controls in single location installations, tighten the blue
terminal without any wires attached. DO NOT connect the blue terminal to
any other wiring or to ground.
2 Up to 9 Accessory Switches may be connected to the Wireless Switch.
Total blue terminal wire length may be up to 250 ft (76m).
3 Requires WLAS120 for 120V applications, and WLAS277 for 277V
applications.
Optional
Hot/Live
Black
Green
Load
LUT-MLC*
Ground
Neutral
Multi-Location Installation2
with WLAS1278xx or WLAS277xx3
WLAS Series
Companion Switch
Brass
Blue
WLAS Series
Companion Switch
Brass
Blue
WLS1278xx
Switch
Brass
Blue
Optional
Hot/Live
120V
50/60 Hz
or
277V
50/60 Hz
Black
Green
Black
Green
Ground
Black
Ground
Green
Load
LUT-MLC*
Ground
Neutral
Clear Connect™ is a registered trademark of Lutron Electronics Co., Inc.
E-24
®
Wiring Device-Kellems
www.hubbell-wiring.com
H-MOSS® Controls
Specifications
Control Units and Add-A-Relay
Control Units - CU300/347A Series
Electrical
CU300A(M)
CU347A
CU300HD
Power Supply
Power Output
Load Capacity
Incandescent
120V Ballast
230V Ballast
277V Ballast
347V Ballast
AT Sensor/AAR Capacity
Agency Approvals
120-277V AC, 50/60Hz
24V DC, 150mA
347V AC, 60Hz
24V DC, 100mA
100-277V AC, 50/60 Hz
24V DC 250mA
0 to 1800 watts
0 to 2400 watts
NA
0 to 5540 watts
NA
1 to 4 combined
UL Listed, cULus Certified
NA
NA
NA
NA
0 to 5205 watts
1 to 3 combined
UL Listed, cULus Certified
100-277V, 20A Enclosed Switching
Motor Loads:
1HP @ 120V
2HP @ 240/277V
1 to 6 combined
UL Listed, cULus
Physical
Housing
Dimensions
Color
Flame retardant UL 94-5VA thermoplastic
3.69"L x 2.33"W x 1.36"H
Black
Flame retardant UL 94-5VA thermoplastic
4.00"L x 3.4"W x 1.73"H
Black
32°F to 104°F (0°C to 40°C); 0% to 90% non condensing relative humidity
-20°F to 150°F (-29°C to 65°C); 0% to 90% non condensing relative humidity
See CU300HD data sheet for ratings
Environmental
Operating
Storage
Add-A-Relay - AAR
Electrical
Power Input
Load Capacity
Incandescent
120V Ballast
230V Ballast
277V Ballast
347V Ballast
Agency Approvals
24V DC nominal, 33mA from Hubbell CU series control unit
0 to 1800 watts
0 to 2400 watts
0 to 3680 watts
0 to 5540 watts
0 to 5205 watts
UL Listed
Physical
Housing
Dimensions
Color
Flame retardant UL 94-5V thermoplastic
3.69"L x 2.33"W x 1.36"H
Black
Environmental
Operating
Storage
32°F to 104°F (0°C to 40°C); 0% to 90% non condensing relative humidity
-20°F to 150°F (-29°C to 65°C); 0% to 90% non condensing relative humidity
Wired Lighting and Plug Load Control
CU300HD
Controlling 50%
of Outlets
CU300xx
Not used
X
www.hubbell-wiring.com
®
Wiring Device-Kellems
E-25
H-MOSS® Controls
Specifications and Wiring Schematics
Passive Infrared Wall Switches
WLC Load Control with Wireless Clear Connect Communication
Electrical
WLCA
WLCU301
WLC301
WLC302
WLC402W
Power Supply
24V DC
100-277V AC, 50/60Hz
100-277V AC, 50/60Hz
100-277V AC, 50/60Hz
100-277V AC, 50/60Hz
Power Output
N/A
24V DC 250mA
N/A
N/A
N/A
Circuits Controlled
N/A
Load Capacity
1
1
2
2
100-277V, 20A
1HP @ 120V AC
2HP @ 240/277V
100-277V, 20A
1HP @ 120V AC
2HP @ 240/277V
100-277V, 20A
1HP @ 120V AC
2HP @ 240/277V
100-277V, 20A
1HP @ 120V AC
2HP @ 240/277V
Agency Approvals
UL Listed, cULus, FCC, IC
Device Type (Transmit
or Receive)
TX
TX
RX
RX
RX
Range (Standard/
Obtructed)
30 ft (10m)
30 ft (10m)
30 ft (10m)
30 ft (10m)
30 ft (10m)
Range (Unobstructed,
line of site)
60 ft (30m)
60 ft (30m)
60 ft (30m)
60 ft (30m)
60 ft (30m)
Physical
Housing
Flame retardant UL 94-5VA thermoplastic
Dimensions
Color
4.00"L x 3.4"W x 1.73"H
Black
Black
Black
4.68"L x 4.94"W x 2.78"H
Black
White
Wireless Lighting and Plug Load Control
Easily upgrade existing occupancy based lighting control systems to support
automated plug load controls.
WLC301
CU300xx
WLCA
Controlling 50%
of Outlets
Use WLC302
or 402 for dual
circuit control)
WLC301
Controlling 50%
of Outlets
WLCU301
Clear Connect™ is a registered trademark of Lutron Electronics Co., Inc.
E-26
®
Wiring Device-Kellems
www.hubbell-wiring.com
H-MOSS® Controls
Wiring Schematics
Ceiling and Wall Mount Sensors
Adaptive Dual Technology, Ultrasonic, and Passive Infrared Ceiling and Wall Mount Sensors
ATD, ATU and ATP Series
Single Circuit Application:
1 to 4 sensors wired to control unit with optional override
off switch.
CU Series Control Unit
CU Series Control Unit
N H
Blue
Red
Red
Switch*
Red
Red
Blk
Blue
Red
Blk
Blue
Red
Blk
Blue
Red
Blk
Red (+24V)
Black
Blue
Black
White
Red
Blue
White
Red
Red
Black
Blue
Black
Blk
N H
Single Circuit Application:
Two control units wired in parallel to operate 5 to 8 sensors
in a single zone. Maximum 4 sensors per control unit any
sensor will activate lighting.
ATD, ATU and ATP Series Sensors**
ATD, ATU and ATP Series Sensors**
Lighting Load
Lighting Load
White
Blue
Black
*Optional Override Off Switch
CU Series Control Unit
Two Circuit Application:
1 to 4 sensors wired to control unit and Add-A-Relay (control
unit switches circuit 1, Add-A-Relay switches circuit 2).
White
Red
Blk
Red
Blue
Blue
Red
Red
White
Blk
Red (+24V)
Black
Blue
Black
Lighting Load
CU Series Control Unit
CU Series Control Unit
N H
White
Red
Red
Black
Blue
Blue
Circuit 2
N H
Red
Red
Red (+24V)
Black
Blue
Black
AAR Add-A-Relay
Blk
Circuit 1
Blue
Lighting Load
Red
ATD, ATU and ATP Series Sensors**
Two Circuit Application:
Two control units wired in two circuits to operate 2 to 8 sensors
in a single zone. Maximum 4 sensors per control unit any
sensor will activate both lighting loads.
Blk
Red
Red
Blk
Blue
Red
Blue
White
Red
Red
Black
Blue
Black
Blk
Circuit 1
N H
Red
Red
ATD, ATU and ATP Series Sensors**
Lighting Load
White
CU Series Control Unit
(Specify Voltage)
www.hubbell-wiring.com
Red
Blue
Red
Red
Blk
White
Blue
Red (+24V)
Black
Blue
Black
Red
Circuit 2
N H
Note: **For wiring sensors with isolated relay and photocell option (models
with “RP” suffix): Photocell Option: Cap off Blue sensor wire. Connect
Gray sensor wire to Blue control unit wire. Isolated Relay Option:
Common-Blue/White wire, Normally Closed-Black/White wire,
Normally Open-Yellow/White wire.
Black
Blk
Lighting Load
Blue
Lighting Load
White
®
Wiring Device-Kellems
E-27
H-MOSS® Controls
Wiring Schematics
Ceiling and Wall Mount Sensors
Adaptive Technology Dual, Ultrasonic, and Passive Infrared Ceiling and Wall Mount Sensors
ATD, ATU and ATP Series
Single Circuit, Dual Level Switching Application:
1 to 4 sensors wired to control unit with optional override
off switches.
Single Circuit, 3-Way Switching Application:
1 to 4 sensors wired to control unit with optional override
off switches.
Traveler
Traveler
Single Pole Switch
Red
Blk
3-Way Switch
3-Way Switch
Red
Blue
Blk
Blue
Red
Blk
Blue
Red
Inboard Ballast
Single Pole Switch
Red
CU Series Control Unit
(Specify Voltage)
Red
Blk
Red
Red
Blk
Black
Blue
Blue
Blue
Red
Black
White
Lighting Load
Outboard Ballast
CU Series Control Unit
(Specify Voltage)
Red
White
ATD, ATU and ATP Series Sensors**
H
N
Red
Red
Blk
Black
Blue
Blue
Black
White
White
N
H
ATD, ATU and ATP Series Sensors**
Multi-Circuit Application:
1 to 4 sensors wired to control unit that is wired to a
multi-pole lighting contactor.
Single Circuit, 4-Way Switching Application:
1 to 4 sensors wired to control unit with optional override
off switches.
CU Series Control Unit
N
Traveler
H
Red (+24V)
Black
Traveler
Black
White
Blue
Red
Blk
Blue
Red
Blk
Blue
Red
3-Way Switch
Red
4-Way Switch
3-Way Switch
Blk
Red
Blue
Lighting Contactor
ATD, ATU, ATP, PIR Series Sensors**
Red
CU Series Control Unit
(Specify Voltage)
Red
Blk
White
Blue
Multipole, Normally Open
Lighting contactor to be
supplied by Contractor
Lighting Load
C
Traveler
Red
Red
Red
Blk
Black
Blue
Blue
ATD, ATU and ATP Series Sensors**
Black
White
White
H
N
Note: **For wiring sensors with isolated relay and photocell option (models
with “RP” suffix): Photocell Option: Cap off Blue sensor wire. Connect
Gray sensor wire to Blue control unit wire. Isolated Relay Option:
Common-Blue/White wire, Normally Closed-Black/White wire,
Normally Open-Yellow/White wire.
E-28
®
Wiring Device-Kellems
www.hubbell-wiring.com
Section F
Switched Disconnects and Enclosures
Index
Product
Page
Circuit-Lock® Unfused
Disconnect Switches
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-2
Ratings Quick Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-3
Circuit-Lock® Unfused Disconnect Switches
30, 60 and 100 Amp Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-5
Accessories and Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-6
Dimensions and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-7
MotorQuick® Disconnect Switches
Cost of Ownership Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-8
Quick Disconnect Switches and Accessories . . . . . . . . . . . . . . . . . . . . . F-9
Dimensions and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-10
Fused Disconnects,
MotorQuick® and VFDs
Circuit-Lock® Fused Disconnect Switches
30 and 60 Amp Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-12
Horsepower Ratings and Specifications. . . . . . . . . . . . . . . . . . . . . . . . . F-13
Hazardous Locations
Unfused Disconnect Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-15
AC Manual Toggle Controllers/Disconnects
600V AC Manual Motor Controllers/Disconnects. . . . . . . . . . . . . . . . . . F-17
NEMA 1 Disconnect Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-18
NEMA 3/3R and 3R Disconnect Switches . . . . . . . . . . . . . . . . . . . . . . . . . F-19
Hazardous Locations
30 Ampere, 600 Volts AC Manual Motor Controllers . . . . . . . . . . . . . . . . F-20
40, 50, 60 and 85 Ampere, 600 Volts AC Manual Motor Controllers . . . . F-21
NEMA 4X Disconnect Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-22
Pendant Pushbutton Stations
CPB2 and PBS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-23
Accessories and Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . F-24
NEMA 1, 3/3R and 4X
Disconnect Switches
www.hubbell-wiring.com
®
Wiring Device-Kellems
F-1
Hubbell’s Circuit-Lock® Manual Motor Controllers
"Suitable as Motor Disconnects"
Hubbell manufactures one of the most complete lines of motor disconnects on the market. Designed to ensure maximum
reliability and performance, Hubbell Circuit-Lock® motor controllers meet or exceed all industry requirements. Because our
Circuit-Lock® motor controllers are also disconnects, they ensure safety, compliance, flexibility and productivity for today’s
industrial and commercial environments. Whether controlling motor loads, safely terminating power or isolating equipment,
Hubbell has the solution for you—no matter what the environment or application.
Hubbell
Safety
Safety of personnel and
equipment is paramount
in any manufacturing
environment. Hubbell
Circuit-Lock® motor
controllers withstand
short circuits and provide
a high degree of safety
across the factory floor.
Disconnect Switches for
Variable Frequency Drives
(VFDs) safely terminate
power to prevent risk of
injury and damage to highperformance output devices
used for controlling today’s
conveyor systems.
Hubbell
Flexibility
Hubbell
Productivity
With Hubbell’s wide range
of Circuit-Lock® motor
controllers and disconnects
that offer several mounting
options, NEC® line of sight
requirements are easily
achieved at the equipment
or on the wall in virtually
any industrial environment.
Switches with a compact
footprint, a variety of
NEMA® type enclosures
and plug-and-play
LINKOSITY® make switch
placement easier and
more flexible than ever.
Circuit-Lock® keeps assembly
lines, goods and services
moving. By offering a dual
motor controller-disconnect
rating, power can be safely
terminated at any point in the
circuit to perform maintenance
on a single motor without
shutting down the entire
line. With the plug-and-play
LINKOSITY® power system,
MotorQuick® reduces motor
change-out time by more than
65% to get equipment up and
running faster.
Variable Frequency Disconnects
Hubbell
Compliance
Compliance with codes
and regulations is a must in
any industrial environment.
Hubbell motor controllers
meet a variety of
requirements, including
OSHA lockout/tagout,
NSF certification for
hygiene and hazardous
location ratings. Each
Circuit-Lock® motor
controller is UL listed
as “Suitable as Motor
Disconnect”. The NEC®
allows for the disconnect
and controller to be in
one unit.
Each Controller is Also a Disconnect
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
F-2
®
Wiring Device-Kellems
www.hubbell-wiring.com
Switched Disconnects and Enclosures
Hubbell Manual Motor Controllers and Disconnects
"Suitable as Motor Disconnects"
Ratings Quick Reference Guide
Circuit-Lock® Switched Enclosures
Amp Description
30
TYPE 1 Non-Metallic
TYPE 1 Non-Metallic
TYPE 1 Non-Metallic
NEMA 1 Aluminum
NEMA 1 Aluminum
NEMA 1 Non-Metallic
NEMA 1 Non-Metallic
NEMA 3/3R Non-Metallic
NEMA 3/3R Non-Metallic
NEMA 3R Die Cast Aluminum
NEMA 3R Die Cast Aluminum
NEMA 3R Aluminum
NEMA 3R Aluminum
TYPE 4X Non-Metallic
TYPE 4X Non-Metallic
TYPE 4X Non-Metallic
TYPE 4X Non-Metallic
TYPE 4X Non-Metallic
TYPE 4X Non-Metallic
TYPE 4X Non-Metallic
TYPE 4X Non-Metallic
TYPE 4X Stainless Steel
TYPE 4X Stainless Steel
TYPE 4X Stainless Steel
TYPE 4X Stainless Steel
TYPE 4X Stainless Steel
TYPE 4X Non-Metallic Fused Disconnect
NEMA 4X Stainless Steel
NEMA 4X Non-Metallic
60 NEMA 3R Aluminum
NEMA 3R Aluminum
TYPE 4X Non-Metallic
TYPE 4X Non-Metallic
TYPE 4X Stainless Steel
TYPE 4X Stainless Steel
TYPE 4X Non-Metallic Fused Disconnect
NEMA 4X Stainless Steel
NEMA 4X Non-Metallic
100 TYPE 4X Non-Metallic
TYPE 4X Non-Metallic
TYPE 4X Stainless Steel
TYPE 4X Stainless Steel
Phase Poles
3
3
3
1
3
1
3
1
3
1
3
1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
1
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2
3
2
3
2
3
2
3
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
2
3
3
3
3
3
3
3
3
3
3
3
3
120
240
HP
480
600
Catalog Number
3
3
3
2
3
2
3
2
3
2
3
2
3
1
1
1
1
1
1
1
1
1
1
1
2
1
1
3
3
—
—
7.5
7.5
7.5
7.5
3
—
—
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5
7.5
5
7.5
5
7.5
5
7.5
5
7.5
7.5
7.5
7.5
7.5
5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
10
10
30
30
30
30
15
10
10
30
30
30
30
15
15
15
10
15
10
15
10
15
10
15
10
15
15
15
15
15
10
15
15
15
15
15
15
15
15
15
15
15
15
25
50
50
50
50
30
25
25
50
50
50
50
20
20
20
15
20
15
20
15
20
15
20
15
20
15
15
15
15
10
15
15
15
15
15
15
15
15
20
20
20
20
30
50
50
50
50
40
30
30
50
50
50
50
HBL1389MQR
HBL1389MQ5
HBL1389MQR2
HBL1372D
HBL1379D
HBL1392D
HBL1389D
HBL13R22D
HBL13R23D
HBL13R12D
HBL13R13D
HBL13R92D
HBL13R89D
HBLDS3
HBLDS3AC
HBLDS3NK
HBLDS3ACNK
HBLDS33ACNK
HBLDS3MQR
HBLDS3MQ5
HBLDS3MQR2
HBLDS3SS
HBLDS3SSAC
HBLDS3SSVFD
HBLDS3SSMQR
HBLDS3SSMQ5
FDS30
HBL13S33D
HBL13X33D
HBL16R92D
HBL16R93D
HBLDS6
HBLDS6AC
HBLDS6SS
HBLDS6SSAC
FDS60
HBL16S63D
HBL16X63D
HBLDS10
HBLDS10AC
HBLDS10SS
HBLDS10SSAC
120
240
HP
480
600
Catalog Number
2
2
2
3
3
2
3
2
3
—
—
—
—
—
—
—
5
5
5
7.5
7.5
5
7.5
5
7.5
—
10
10
10
10
10
10
10
10
10
15
15
10
15
10
15
—
15
25
15
25
15
25
15
15
15
20
20
15
20
15
25
—
20
30
20
30
20
40
HBL7832D
HBL7832DS
HBL7832DX
HBL7810D
HBL7810DS
HBL7842D
HBL7843D
HBL7852D
HBL7853D
HBLFG30
HBL7862D
HBL7863D
HBL7862FWD
HBL7863FWD
HBL7882D
HBL7883D
HBL1379D
HBL13R89D
HBLDS3
HBL16R93D
HBL13S33D
FDS30
HBLDS3SS
HBL16S63D
HBLDS3MQR
HBLDS3MQ5
Circuit-Lock® Switches
Amp
30
40
50
—
60
85
Description
Toggle Switch
Short Toggle Switch
Toggle Switch, Bulk Pack
Toggle Switch
Short Toggle Switch
Toggle Switch
Toggle Switch
Toggle Switch
Toggle Switch
Finger guard (30–50A Switches)
Toggle Switch
Toggle Switch
Toggle Switch – Front Wire
Toggle Switch – Front Wire
Toggle Switch
Toggle Switch
www.hubbell-wiring.com
Phase Poles
1
1
1
3
3
1
3
1
3
—
1
3
1
3
1
3
2
2
2
3
3
2
3
2
3
—
2
3
2
3
2
3
®
Wiring Device-Kellems
HBL7810D
HBL7853D
HBL7862D
HBL7863D
F-3
Switched Disconnects and Enclosures
Circuit-Lock® Unfused Disconnect Switches
Features and Benefits
Circuit-Lock® 30, 60, and 100 Ampere Unfused Disconnect Switches
NEC section 430.102(B) requires each motor controller to have a disconnect within line of sight from the motor and driven equipment.
NEC section 430.109(A)(6) recognizes that a manual motor controller and disconnect can be the same unit, provided it has been tested
for this purpose. Hubbell’s Circuit-Lock® Unfused Disconnect Switches are UL listed as a manual motor controller and also “suitable as a
motor disconnect” and meet these code requirements. In addition, the enclosure offers the ability to lock directly wired motor loads in the
OFF position to comply with OSHA Lockout/Tagout regulations. This safety enclosure is Type 4X (Wash down, Corrosion resistant) and
is also suitable for use with metallic conduit. The switch is mounted on an internal frame that is integral with the enclosure and bonds all
grounds, and it accepts auxiliary contacts that can be used to signal PLC controllers.
Molded-in conduit opening
and field installed hub
Stainless steel
hardware
for corrosion
resistance
High visibility red
handle can be locked
in the OFF position
as a method of
compliance with
OSHA Lockout/
Tagout requirements
Internal frame
automatically
bonds all grounds
Reversible interior
accommodates
top or bottom
conduit opening
Captured
neoprene gasket
provides a
watertight seal
between cover
and base
Type 4X enclosure is molded of
rugged Valox® to resist abuse,
corrosion and enhance safety
Circuit-Lock® Unfused Disconnect Switches are
available in 30, 60 and 100 Amp, 600V AC ratings.
Auxiliary contacts are available
for control circuit applications
including the ON/OFF control
of pilot lights or signal for
programmable controllers.
HBLDS3
Three molded-in
conduit drill points
are located on the
top, bottom, and
back surface of
enclosure
Conduit hub and adjustable
mounting feet are supplied for
ease of installation.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
F-4
®
Wiring Device-Kellems
www.hubbell-wiring.com
Switched Disconnects and Enclosures
Circuit-Lock® Unfused Disconnect Switches
UL Listed, CSA Certified
TYPE 4, 4X and
12 Enclosure Rating
“Suitable as Motor Disconnects”
IP66
SUITABILITY
Unfused Disconnect Switches in Non-Metallic Enclosure*
Description
Catalog Number
30A Circuit-Lock disconnect switch.
30A Circuit-Lock disconnect switch for use with variable frequency drives.
30A Circuit-Lock disconnect switch with HBLAC1 auxuliary contact.
30A Circuit-Lock disconnect switch with HBLAC2 auxuliary contact.
30A Circuit-Lock disconnect switch without conduit knockout or conduit fitting.
30A Circuit-Lock disconnect switch with HBLAC1 auxuliary contact without
conduit knockout or conduit fitting.
30A Circuit-Lock disconnect switch with 3 auxuliary contacts, w/o conduit knockouts.
Break before main break – 1 set “normally open”, 1 set “normally closed”.
Break after main break – 2 sets “normally open”, 1 set “normally closed”.
60A Circuit-Lock disconnect switch.
60A Circuit-Lock disconnect switch with HBLAC1 auxuliary contact.
60A Circuit-Lock disconnect switch for use with variable frequency drives.
100A Circuit-Lock disconnect switch.
100A Circuit-Lock disconnect switch with HBLAC1 auxuliary contact.
100A Circuit-Lock disconnect switch for use with variable frequency drives.
HBLDS3
HBLDS3VFD
HBLDS3AC
HBLDS3AC2
HBLDS3NK
HBLDS3ACNK
HBLDS33ACNK
HBLDS6
HBLDS6AC
HBLDS6VFD
HBLDS10
HBLDS10AC
HBLDS10VFD
HBLDS3
Unfused Disconnect Switches in Stainless Steel Enclosure*
Description
Catalog Number
30A Circuit-Lock disconnect switch.
30A Circuit-Lock disconnect switch with HBLAC1 auxuliary contact.
30A Circuit-Lock disconnect switch for use with variable frequency drives.
60A Circuit-Lock disconnect switch.
60A Circuit-Lock disconnect switch with HBLAC1 auxuliary contact.
60A Circuit-Lock disconnect switch for use with variable frequency drives.
100A Circuit-Lock disconnect switch.
100A Circuit-Lock disconnect switch with HBLAC1 auxuliary contact.
100A Circuit-Lock disconnect switch for use with variable frequency drives.
HBLDS3SS
HBLDS3SSAC
HBLDS3SSVFD
HBLDS6SS
HBLDS6SSAC
HBLDS6SSVFD
HBLDS10SS
HBLDS10SSAC
HBLDS10SSVFD
HBLDS3SS
Auxiliary Contacts for 30, 60 and 100 Amp Switch, NEMA A600 Pilot Duty
Description
Catalog Number
“Break After Main Break”, 1 set of n/o contacts, 1 set of n/c contacts.
HBLAC1**
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC2**
HBLAC1
Note: *Certified by NSF, International.
**Up to two auxiliary contacts per enclosure. Not for use with HBLDS33ACNK.
30A Units are supplied with one ¾ in. NPT Raintight conduit fitting.
60A and 100A Units are supplied with two 1¼ in. NPT Raintight conduit fittings.
Variable Frequency Drive Diagram
www.hubbell-wiring.com
HBLAC2
®
Wiring Device-Kellems
F-5
Switched Disconnects and Enclosures
Circuit-Lock® Unfused Disconnect Switches
“Suitable as Motor Disconnects”
IP66
SUITABILITY
Replacement Covers
Description
Catalog Number
For 30A non-metallic switches.
HBLDS3RC
For 30A stainless steel switches.
HBLDS3SSRC
For 60A non-metallic switches.
HBLDS6RC
For 60A stainless steel switches.
HBLDS6SSRC
For 100A non-metallic switches.
HBLDS10RC
For 100A stainless steel switches.
HBLDS10SSRC
HBLDS3RC
Replacement Ground Block
Description
Catalog Number
For 30A switches.
HBL30RGB
For 60A and 100A switches.
HBL60100RGB
Replacement Neutral Block
HBL30RGB
HBL30RNB
Description
Catalog Number
For 30A switches.
HBL30RNB
For 60A switches.
HBL60RNB
For 100A switches.
HBL100RNB
Replacement Switches
HBLDS3RS
Description
Catalog Number
For 30A switches.
HBLDS3RS
For 60A and 100A switches.
HBLDS60100RS
For HBLDS33ACNK.
HBLDS33ACRS
Replacement Mounting Feet
HBLRFT1
F-6
Description
Catalog Number
For 30A non-metallic switches.
HBLRFT1∆
For 60A and 100A non-metallic switches.
HBLRFT2 ∆
Note:
∆ Package
of 10 feet and 10 screws.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Switched Disconnects and Enclosures
Circuit-Lock® Unfused Disconnect Switches
Dimensions and Specifications
Dimensions
Horsepower Ratings
Non-Metallic
Stainless Steel
Key
30A
inch (mm)
60A/100A
inch (mm)
30A
inch (mm)
60A/100A
inch (mm)
A
6.00 (152)
7.75
—
—
B
5.12
(130)
6.87 (175)
4.87 (124)
7.30 (185)
C
4.12
(105)
4.75 (121)
3.30 (84)
5.50 (140)
D
6.62 (168)
8.00 (203)
—
—
E
7.62 (194)
9.95 (253)
7.05 (179)
10.30 (262)
F
8.50 (216)
11.00 (279)
8.38 (213)
11.63 (296)
G
4.12
5.94 (151)
5.39 (137)
5.93 (151)
(105)
(197)
Voltage
30A
30A*
60A
100A
1Ø 120V AC
1
1
7.5
7.5
1Ø 200–240V AC
3
2.5
15
15
1Ø 480V AC
5
5
30
30
3Ø 200–240V AC
7.5
5
30
30
3Ø 480V AC
15
10
50
50
3Ø 600V AC
15
10
50
50
Note: *HBLDS33ACNK.
Non-Metallic
Stainless Steel
Circuit-Lock® Unfused Disconnect Switches
Specifications
Moisture Resistance
Flammability
Operating Temperature
UV Resistance
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Current Ratings (SCCR):
(Motor Disconnect)
Terminal Identification
Product Identification
Mounting
Impact Resistance
Materials
Part
Base
Top
Handle
Conduit Hub
Enclosure Gasket
Shaft (Unfused)
Shaft Seal
Frame
Enclosure Screws
Indoor and Outdoor – Type 4X (Wash down, Corrosion resistant);
Indoor – 30, 60A and 100A Type 12 (Dust-tight, Falling Dirt, Noncorrosive Liquids).
UL94-5VA and V0 Classification.
Maximum Continuous 75°C; Minimum Continuous -40°C without impact.
All materials are UV stabilized.
Withstands 3000V AC minimum.
600V AC RMS.
Certified for current interrupting at full rated current and voltage.
• 30/60/100A: Suitable for use on a circuit capable of delivering not more than 10kA RMS
symmetrical, 600V AC max.
• 30A: Suitable for use on a circuit capable of delivering not more than 65kA RMS symmetrical,
600V AC max. when protected by Class J fuses rated 30A max.
• 60/100A: Suitable for use on a circuit capable of delivering not more than 65kA RMS symmetrical,
600V AC max. when protected by Class J fuses rated 100A max.
In accordance with UL, CSA and international conventions.
Identification and ratings are part of external label.
Non-Metallic - External fully adjustable feet. Stainless Steel - Feet are fixed.
In accordance with UL 746C.
Non-Metallic
Stainless Steel
Valox®
Valox®
Valox®
Zinc 30A Unfused - ¾ in.
Zinc 60/100A Unfused - 1¼ in.
Neoprene
Valox®
Molded Neoprene
Galvanized Steel
Stainless Steel 300 Series
#14 Gauge Type 304 Stainless Steel
#14 Gauge Type 304 Stainless Steel
Valox®
Zinc 30A - ¾ in.
Zinc 60/100A - 1¼ in.
Neoprene
Valox®
Molded Neoprene
N/A
Stainless Steel
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
F-7
Switched Disconnects and Enclosures
Hubbell’s Motor-Quick®
Plug and Play Technology
MotorQuick® significantly reduces the time it takes to
replace motors by combining the plug-and-play technology
of the LINKOSITY® power system with the versatility of
Circuit-Lock® motor disconnect switches. Quick disconnect
terminations will reduce motor change-out time by
aproximately 65%. Keeping spare motors already pre-
wired with a LINKOSITY® inlet enables wiring to be done
off-line when it is convenient, not critical. Motor rotation can
be pre-checked in a maintenance shop to further speed
the installation.
The net result is that equipment is up and running in a
fraction of the time, helping improve the bottom line.
MotorQuick® Cost of Ownership Analysis
Traditional Motor Changeout
Catalog Number
Total
Material Cost
Labor
Cost/ Hr
HBL1389D
HBLDS3
$106.00
$185.00
$53.00
$53.00
Downtime
Total Labor
Cost
Downtime
Cost/hr
Total
Downtime
Cost
Total Cost
1 hour
1 hour
$53.00
$53.00
$750.00
$750.00
$750.00
$750.00
$909.00
$988.00
Downtime
Cost/hr
Total
Downtime
Cost
Total Cost
Total Savings
$750.00
$750.00
$250.00
$250.00
$566.67
$678.67
$342.33
$309.33
MotorQuick® Motor Changeout
Catalog Number
Total
Material Cost
Labor
Cost/ Hr
Downtime
Total Labor
Cost
HBL1389MQ*
HBLDS3MQ*
$299.00
$411.00
$53.00
$53.00
20 minutes
20 minutes
$17.67
$17.67
Note: *MotorQuick catalog numbers are based on the average cost of the various designs.
F-8
®
Wiring Device-Kellems
www.hubbell-wiring.com
30 Ampere, 600 Volts AC
Thermoplastic Cover
on Plated Steel Base
Type 4X Enclosure
Lockable Handle to
Meet OSHA Lockout/
Tagout Regulations
NEMA 1 Enclosure
Pre-wired with
LINKOSITY®
Components
High Impact Valox®
Enclosure
HBLDS3MQ5
Crush and Impact
Resistance of
MC Cable
HBL1389MQ5
Cable Ratings:
TC-ER, MTW, STOOW
Quick Disconnect Switches
Type 1 Non-Metallic Enclosure 30A 3 Pole 600V AC
Catalog Number
HBL1389D with one pre-wired LINKOSITY® female receptacle (load side).
HBL1389D with 5 foot pre-wired LINKOSITY® female cable (load side).
HBL1389D with one pre-wired LINKOSITY® male receptacle (line side) and
one pre-wired LINKOSITY® female receptacle (load side).
HBL1389MQR
HBL1389MQ5
HBL1389MQR2
Type 4X Non-Metallic Enclosure 30A 3 Pole 600V AC
HBLDS3 with one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3 with 5 foot pre-wired LINKOSITY® female cable (load side).
HBLDS3 with one pre-wired LINKOSITY® male receptacle (line side)
and one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3MQR
HBLDS3MQ5
HBLDS3MQR2
HBL1389MQR2
Type 4X Stainless Steel Enclosure 30A 3 Pole 600V AC
HBLDS3SS with one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3SS with 5 foot pre-wired LINKOSITY® female cable (load side).
HBLDS3SS with one pre-wired LINKOSITY® male receptacle (line side)
and one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3SSMQR
HBLDS3SSMQ5
HBLDS3SSMQR2
HBL1389MQ5
Accessories
Description
Catalog Number
3P 4W LINKOSITY® male receptacle for installation on motor.
3P 4W LINKOSITY® female receptacle for installation in switch.
3P 4W LINKOSITY® double ended (male/female) 5-50 foot cable.
3P 4W LINKOSITY® single ended (female) 5-50 foot cable.
Cord connector, ¾ in. NPT .63–.75 in. (16.0–19.1) diameter.
Lock-on cover for LINKOSITY® connections.
RM3004PA001
RF3004PA001
PH3004PAxxx*
PF3004PAxxx*
SHC1037CR
PH2030C
HBLDS3MQR
Note: *Cables available from 5-50 feet in 5 foot increments. To purchase larger cable, replace the XXX with the required
length in feet. (Examples: PH3004PA005 = 5 foot cable, PH3004PA050 = 50 foot cable.)
Sample Set Up
(1) HBLDS3MQR
+
(1) PH3004PAxxx
+
+
(1) RM3004PA001
+
=
Total Set Up**
=
Note: ** Retrofit parts available for pre-existing disconnect switch installations.
Please consult factory for availability.
HBLDS3MQ5
PH2030C
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
F-9
30 Ampere, 600 Volts AC
Dimensions
Type 1
Male
LINKOSITY
Receptacle
(MQR2 Option)
Type 4X
6.00" (152)
5.12" (130)
4.12"
(105)
3.97"
(100.84)
ON
3.40"
(86.36)
4.52"
(114.81)
.88"
(22.35)
Female
LINKOSITY Cord
(MQ5 Option)
Female
LINKOSITY
Receptacle
HP Rating
120V AC
240V AC
480V AC
600V AC
OFF
Male
LINKOSITY
Receptacle
(MQR2 Option)
Female
LINKOSITY Cord
(MQ5 Option)
3
7.5
15
20
Specifications
4.12"
(105)
6.62"
(168)
7.62"
(194)
8.50"
(216)
Female
LINKOSITY
Receptacle
HP Rating
120V AC
240V AC
480V AC
600V AC
1
7.5
15
15
Type 1
Type 4X
2,200V AC minimum for 1 minute.
6,000 cycles with load.
600V AC RMS.
10,000 RMS symmetrical amps when tested
with 60A max J fuses.
10,000 RMS symmetrical amps when tested
with 125A RK5 fuses.
2,200V AC minimum for 1 minute.
6,000 cycles with load.
600V AC RMS.
• 30: Suitable for use on a circuit capable of delivering not more
than 10kA RMS symmetrical, 600V AC max.
• 30A: Suitable for use on a circuit capable of delivering not more
than 65kA RMS symmetrical, 600V AC max. when protected by
Class J fuses rated 30A max.
10,000 minimum cycles.
Amps AWG Min.
AWG Max.
30
#14
#10
20 inch pounds
30
—
—
—
10,000 minimum cycles.
Amps
AWG Min.
AWG Max.
30
#14
#10
30
20 inch pounds
UL746C
UL94HB/V-0.
Max. continuous
Min. continuous w/o impact
UL94-5VA and V0 Classification.
Max. continuous 75°C
Min. continuous -40°C
Electrical Performance
Dielectric Voltage
Electrical Life
Max. Working Voltage
Short Circuit Current Ratings (SCCR):
(Motor Disconnect)
Short Circuit Current Ratings (SCCR):
(Motor Controller)
Mechanical
Mechanical Life
Terminal Accommodations
Terminal Torque
Impact Resistance
Environmental
Flammability
Operating Temp.
60°C
-40°C
Listings
UL 508
Industrial Control Equipment File #E36355
Industrial Control Equipment File #E36355
LINKOSITY® Connection
Certifications
Connecting Components
Materials
Listed to UL 2238 and UL 50E.
Electrical Performance
Voltage
Amperage
Up to 600V AC.
Up to 30A.
Environmental
Connectivity System Components
Moisture Resistance
Ingress Protection
Flammability
UL Type 4, 4X, 12 and 13.
IP67 Suitability.
UL94HB cables / UL94V-0 receptacles.
Connectivity System Components
Contact Carrier
Nylon 6/6, white.
Contact Materials
Pins - brass.
Sockets - leaded nickel copper
w/ stainless steel sleeve.
Contact Plating
Hard gold over palladium/nickel.
Overmold Material
Glass filled polyurethane, gray.
Coupling Hardware
Nickel plated brass.
Cable (16 AWG and Up)
UL 600V Type TC-ER, MTW 90°C
or STOOW 600V 105°C.
Dimensions in Inches (mm)
F-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
Switched Disconnects and Enclosures
Circuit-Lock® Fused Disconnect Switches “Suitable as Motor Disconnects”
Features and Benefits
Circuit-Lock® 30 and 60 Ampere Fused Disconnect Switches
The Circuit-Lock Fused Disconnect Switch provides fused switched control of a directly wired load. The switch cannot
be turned ON unless the enclosure cover is closed. The fuses cannot be accessed until the switch is turned OFF. The
fuse holder accepts Class “J” fuses. This enclosure is non-metallic and is listed for Outdoor/Indoor (Type 4X Wash down,
Corrosion resistant). The handle can be locked in the OFF position to comply with OSHA Lockout/Tagout regulations.
Three molded-in conduit drill points are
located on the top, bottom, and back
surface of enclosure. Conduit hub provided:
30A 1 inch NPT, 60A 1¼ inch NPT
Adjustable mounting
feet (4) can be
mounted in any of
three positions for
ease of installation
Stainless steel
hardware
for corrosion
resistance
Fused disconnect
switches accept
Class “J” fuses
Safety interlocked
fuse access door
Non-metallic enclosure
meets UL 50E Type 4X
(watertight) 12 (dust-tight)
and IP66 suitability
requirements. Enclosure is
molded of rugged Valox®
to resist abuse, corrosion
and enhance safety.
All external hardware
is stainless steel
Conduit hub and adjustable
mounting feet are supplied
with each Circuit-Lock®
Fused Disconnect Switch.
Stainless steel ¼ inch turn
door fasteners for quick,
easy access to fuses.
Lockable high
visibility red handle
to meet OSHA
Lockout/Tagout
FDS30
Removable door
for ease of wiring
and installation
Enclosure door can be locked
to prevent unauthorized
access. Additionally, if the
switch is ON, the door cannot
be opened.
Compact Fused Disconnect Switch
accepts Class “J” fuses. Fuse holders
are top mounted for easy access. The
switch accepts auxiliary contacts for
control circuit applications including
the ON/OFF control of remote pilot
lights or signal for programmable
controllers.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
F-11
Switched Disconnects and Enclosures
Circuit-Lock® Fused Disconnect Switches “Suitable as Motor Disconnects”
Dimensions
UL Listed, CSA Certified
TYPE 4, 4X and
12 Enclosure Rating
IP66
SUITABILITY
30 and 60 Amp Fused Disconnect Switches
Description
Catalog Number
30A Circuit-Lock fused disconnect switch.
FDS30*
60A Circuit-Lock fused disconnect switch.
FDS60*
Note: *Class “J” fuses not included.
Auxiliary Contacts
Description
Catalog Number
Auxiliary contact, normally open, A600 pilot duty.
ACFSNO
Auxiliary contact, normally closed, A600 pilot duty.
ACFSNC
FDS30
Watertight Closure Plug Kits
ACFSNO
Description
Catalog Number
For 30A Circuit-Lock fused disconnect switch.
MICPK30
For 60A Circuit-Lock fused disconnect switch.
MICPK60
Replacement Mounting Feet
Description
Catalog Number
Replacement mounting feet and screws for 30A and 60A fused
disconnect switches.
HBLRFT2 ∆
Note: 30A Units supplied with two 1 in. NPT raintight conduit fittings.
60A Units supplied with two 1¼ in. NPT raintight conduit fittings.
∆ Package of 10 feet and 10 screws.
MICPK30
HBLRFT2
Dimensions
7.27"
(184.7)
9.31"
(236.5)
3.60"
(91.4)
10.18"
(258.6)
7.19"
(182.6)
11.46"
(291.6)
12.37"
(314.2)
15.03"
(381.8)
14.48"
(367.8)
15.36"
(390.1)
Dimensions in Inches (mm)
F-12
8.43"
(214.1)
®
Wiring Device-Kellems
www.hubbell-wiring.com
Switched Disconnects and Enclosures
Circuit-Lock® Fused Disconnect Switches
Horsepower Ratings and Specifications
Horsepower Ratings
Ratings
Volts
Standard HP
Maximum HP*
30A
600V AC
Max.
120V AC
208-240V AC
3Ø 240V AC
3Ø 480V AC
3Ø 600V AC
3Ø Y 120/208V AC
3Ø Y 277/480V AC
3Ø Y 347/600V AC
0.5
1.5
3
5
7.5
3
5
7.5
2
3
7.5
15
20
5
15
20
Catalog Number
FDS30
60A
600V AC
Max.
120V AC
208-240V AC
3Ø 240V AC
3Ø 480V AC
3Ø 600V AC
3Ø Y 120/208V AC
3Ø Y 277/480V AC
3Ø Y 347/600V AC
1.5
3
7.5
15
15
7.5
15
15
3
7.5
15
30
50
15
30
40
FDS60
Note: *Requires time delay fuses.
Fuse and Short Circuit Information
Horsepower Ratings
Short Circuit Withstand Rating
The starting current of motors of more than the standard horsepower rating may require the use of
fuses with appropriate time-delay characteristics.
Suitable for use on a circuit capable of delivering not more than 200,000 RMS symmetrical amperes
at the voltage rating of receptacle when protected by Class “J” fuses.
Note: Replacement fused switch must be the same type Hubbell switch as original and have equal or greater short circuit current withstand rating.
Circuit-Lock® Fused Disconnect Switch
Specifications
Moisture Resistance
UV Resistance
Dielectric Voltage
Max. Working Voltage
Impact Resistance
Terminal Identification
Product Identification
Mounting
Fuse Types
Indoor and Outdoor – Type 4X (Wash down, Corrosion resistant);
Indoor – Type 12 (Dust-tight, Falling Dirt, Noncorrosive Liquids).
UL94-5VA and V0 Classification.
Maximum Continuous 75°C;
Minimum Continuous -40°C without impact.
All materials are UV stabilized.
Withstands 3000V AC minimum.
600V AC RMS.
In accordance with UL 746C.
In accordance with UL, CSA and international conventions.
Identification and ratings are part of external label.
External fully adjustable feet.
UL Listed, Class “J”; CSA Certified, HRCI-J.
Materials
Part
Material
Base
Door
Handle
Conduit Hub
Enclosure Gasket
Shaft
Shaft Seal
Frame
Ground Plate
Enclosure Screws
Valox®
Valox®
Valox®
Zinc, 30A Fused – 1 in., 60A Fused – 1¼ in.
Neoprene
Brass
Neoprene
Galvanized Steel
Galvanized Steel
Stainless Steel 300 Series
Flammability
Operating Temperature
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
F-13
Switched Disconnects and Enclosures
Wiring Devices for Hazardous Locations
Features and Applications
Hazardous Location Non-Fused Disconnect Switches
Hubbell’s hazardous location line of non-fused disconnect switches are typically
used for applications with the presence of flammable gasses or vapors, ignitable
dusts and fibers. They are also suitable for use in outdoor or indoor damp, wet
and dirty locations or in areas where frequent wash downs, heavy rain, or water
spray routinely occurs. These switches are compact in size to reduce cost and
make it easier to position on the wall or piece of equipment. The enclosures are
made of copper-free aluminum and have a polyester/epoxy finish to prevent
corrosion. The high visibility handles can be locked out to comply with OSHA
lock out/tag out regulations.
Copper-free aluminum construction
with electrostatically applied polyester/
epoxy finish to prevent corrosion
Compact NEMA 4X enclosure and
footfrint allows easy installation in
tight locations
• 316 Stainless steel bolts
• Top and bottom drilled and
tapped conduit entrances
• For use as motor disconnects
Class I, Div. 1 & 2, Groups B,C,D
Class l, Zones 1 & 2, Groups llB+ H2, llA
Class II, Div. 1 & 2, Groups E,F,G
Class III, NEMA 3, 4, 4X, 7(B,C,D), 9(E,F,G)
Lockable handle to meet
OSHA Lockout/Tagout
regulations
HBLB7NFD13A
Lockable handle to meet
OSHA Lockout/Tagout
regulations
Large visible rotary handle with
“On-Off” indicator allows a quick
means of disconnecting power
HBLB7NFD26A
Features
Applications
• Compact size enclosures provide application flexibility with cost savings
over industry standard sizes.
• Fewer cover bolts reduces installation and maintenance time.
• Gasketed flange with O-ring located inside bolt circle to seal out moisture.
• Rotary handle style operating mechanism with lockout provision as standard.
• Removable ductile mounting lugs adjust to irregular mounting surfaces.
• Bodies have top and bottom drilled and tapped conduit entrances for
power connection.
• UL98 certified switch.
•
•
•
•
•
•
•
F-14
®
Wiring Device-Kellems
Grain manufacturing and storage
Industrial chemical and gas manufacturing
Petroleum refining
Fertilizer manufacturing
Vehicle repair/paint shops
Coal mining
Cotton and fabric mills
www.hubbell-wiring.com
Switched Disconnects and Enclosures
Wiring Devices for Hazardous Locations
30, 60 and 100 Ampere
Standard Materials/Finish
•
•
•
•
•
Enclosures: Copper-free aluminum (less than 4/10 of 1% copper content)
Cover Bolts: 316 Stainless Steel
O-Ring Gasket: Silicone
Finish: Grey Powder Polyester painted exterior, electrostatically applied
Ratings: 600V AC, 230V DC 30–100 Amp
30, 60 and 100 Amp Unfused Hazardous Location Disconnect Switches
HBLB7NFD13A
Description
Catalog Number
30A 3 Pole disconnect switch.
HBLB7NFD13A
30A 3 Pole disconnect switch with auxuliary contact.
HBLB7NFD13AA
60A 3 Pole disconnect switch.
HBLB7NFD26A
60A 3 Pole disconnect switch with auxuliary contact.
HBLB7NFD26AA
100A 3 Pole disconnect switch.
HBLB7NFD21A
100A 3 Pole disconnect switch with auxuliary contact.
HBLB7NFD21AA
HBLB7NFD26A
Unfused Mechanical Interlocks and Plugs
Amp
30
60
Poles/Wires
Voltage AC
Receptacle
Plug
3 Pole, 2 Wire
600V AC
HBLVSQ3023
HBLVP3385
4 Pole, 3 Wire
600V AC
HBLVSQ3034
HBLVP3485
3 Pole, 2 Wire
600V AC
HBLVSQ6023
HBLVP6385
4 Pole, 3 Wire
600V AC
HBLVSQ6034
HBLVP6485
HBLVSQ3034
Note: HBLVSQ 30 amp models come standard with 1" drilled and tapped conduit openings top and bottom plus
two 1" x ¾" reducers and one ¾" close-up plug for maximum flexibility. 60 amp models come with one 1½"
opening on top and bottom and one 1½" close-up plug.
HBLVP3485
Horsepower Ratings
Single Phase HP
Three Phase HP
DC HP
Switch
Amps/Phase
120V AC
230V AC
208V AC
230V AC
480V AC
600V AC
230V DC
Terminal
Wire Size
Conduit
Sizes
Catalog Number
30A / 3P
2
5
10
10
20
30
1
#14-10
1 NPT
HBLB7NFD13A
60A / 3P
3
7.5
20
20
40
40
10
#14-4
1½ NPT
HBLB7NFD26A
100A / 3P
5
15
25
30
50
50
20
#8-1
1½ NPT
HBLB7NFD21A
Dimensions
Outside Box
A
B
Inside Box
C
D
E
Mounting Dimensions
F
G
H
I
J
K
30 Amp
5³⁄₄
8¹⁄₁₆
6⁵⁄₁₆
3⁵⁄₈
5¹³⁄₁₆
5¹⁄₁₆
3¹⁄₈
8¹⁄₈
–
–
1¹⁄₄
60 & 100 Amp
8¹⁄₈
13¹⁄₁₆
7¹³⁄₁₆
4¹⁄₄
9³⁄₁₆
6⁵⁄₁₆
2¹⁄₂
11³⁄₈
6³⁄₈
7¹⁄₂
1¹³⁄₁₆
Fixed Lug Position for HBLB7NFD13A
Optional Position for HBLB7NFD2 A-Series
Standard Lug Position for
HBLB7NFD2 A-Series
F C
I
G
J
A
D
H
E B
K
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
F-15
Switched Disconnects and Enclosures
AC Manual Toggle Controllers/Disconnects
30, 40, 50, 60 and 85A 600V AC
Circuit-Lock® controllers rated “Suitable as Motor Disconnect”
The most complete offering of controllers with top horsepower and high amperage
ratings in such a compact device.
#10 Brass Terminal Screw
Clamping plate for secure
back or side wiring (30A only)
Optional Side Guard
For close wall applications
and finger safe environments
30A, 40A and 50A
Shared Features
Front and Back Wiring
Steel Screws and
Copper Terminals
Strong on/off action with quick-make,
slow break operation
• Provides long-life reliability
• 10,000 Amp High Fault Short Circuit
Withstand Rating
Recessed Wiring Wells
Finger safe environments
Thermoset Body
• Provides high resistance to electrical
arc tracking
• Withstands high temperatures
• Excellent dimensional stability
• Superior dielectric strength
Optional Side Finger Guards
For close wall applications
and finger safe environments.
For 30A, 40A and 50A
controllers.
F-16
60A and 85A
Four Large Silver Alloy
Contacts per Pole
• Excellent conductivity
• Maximum longevity
®
100% Copper Contact Arm
Lubrication-Free Controller
• High heat management
• Reliability
• Continued on/off cycling
even in harsh, dust and
high heat environments
Wiring Device-Kellems
www.hubbell-wiring.com
Switched Disconnects and Enclosures
AC Manual Toggle Controllers/Disconnects
30, 40, 50, 60 and 85A 600V AC
600V AC Manual Motor Controllers/Disconnects
For use in almost any industrial environment. Ideal component switch for motor control
and as a disconnect. Toggle controllers can be built into equipment and enclosures for
either box or panel-mount installation.
HP Rating
Amp
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
600V AC
3Ø
Catalog Number
Poles
ToggleType
Wire
30
2
2
2
3
3
Standard
Short
Standard
Standard
Short
Back/Side
Back/Side
Back/Side
Back/Side
Back/Side
2
2
2
3
3
5
5
5
7.5
7.5
10
10
10
15
15
15
15
15
20
20
HBL7832D
HBL7832DS
HBL7832DX
HBL7810D
HBL7810DS
40
2
3
Standard
Standard
Side
Side
2
3
5
7.5
10
15
15
20
HBL7842D
HBL7843D
50
2
3
Standard
Standard
Side
Side
2
3
5
7.5
10
15
15
25
HBL7852D
HBL7853D
60
2
3
2
3
Standard
Standard
Standard
Standard
Back
Back
Front
Front
—
—
—
—
10
10
10
10
15
25
15
25
20
30
20
30
HBL7862D
HBL7863D
HBL7862FWD
HBL7863FWD
85
2
3
Standard
Standard
Back
Back
—
—
10
10
15
25
20
40
HBL7882D
HBL7883D
HBL7810D
HBLFG30
HBL7863D
HBLFG30*
Optional Side Guard, for close wall applications and finger safe environments.
HBL7853D
Note: *For 30A, 40A and 50A controllers.
Specifications
Dimensions
Electrical Performance
30, 40 and 50 Amp Standard Toggles
Dielectric Voltage
Min. 2,200V AC minimum for 1 minute
Electrical Life
Min. 6,000 Cycles at rated switch load
Max. Working Voltage 600V AC RMS
Switches
10,000 RMS
Short Circuit
30A & 40A
60A max. when protected by J fuses
Withstand Rating
50A
50A max. when protected by J fuses
as Motor Disconnect 60A & 85A
80A max. when protected by J fuses
Short Circuit
Withstand Rating
All Switches
125A max. RK5 fuses
as Motor Controller
2.25"
(57.2)
3.28"
(83.3)
3.78"
(96.0)
ON
2.44"
(62.0)
2.38"
(60.4)
1.53"
(38.9)
Side
Front
Mechanical
Mechanical Life
Terminal
Accommodations
Wire Type
Terminal Torque
Switch Rating
Min. 10,000 minimum cycles
Switch Rating AWG Max.
30A
#10
40A & 50A
#8**
60A & 85A
#4
Solid and stranded copper wire only.
30A – 50A
20 inch pounds
60A – 85A
25 inch pounds
3.56"
(90.4)
3.78"
(96.0)
3.28"
(83.3)
Environmental
Flammability
Operating Temp.
60 and 85 Amp Standard Toggles
UL94HB/VO
Max. 75°C
Min. -40°C continuous without impact
Listings
UL 508
CSA-C22.2 No.14
ON
1.92"
(48.8)
2.38"
(60.4)
Front
Industrial Control File
#E70402
LR-46186
2.83"
(71.9)
Side
Note: **Use listed certified ring terminal.
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
F-17
Switched Disconnects and Enclosures
NEMA 1 Disconnect Switches
“Suitable as Motor Disconnects”
Thermoplastic Cover
on a Plated Steel Base
Durable, non-conductive cover
HBL1389D
Shared Features
Wiring conduit knockouts
• ½" and ¾" NPT
All Aluminum
Cover and Base
Base is pre-drilled for
rear surface mounting
• Top, bottom or back wire
entry points
Surface mount control
HBL1379D
Switch can be locked in the off position
as a method of compliance with OSHA
lockout/tagout
Circuit-Lock® NEMA 1 Enclosures with Switch
Ideal for use in industrial environments, i.e. conveyer systems, industrial fans, etc.
HP Rating
Amp
Poles
30
HBL1389D
HBL1379D
2
Enclosure Material
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
2
5
10
15
Thermoplastic
600V AC
3Ø
Catalog Number
HBL1392D
30
3
Thermoplastic
3
7.5
15
20
HBL1389D
30
2
Aluminum
2
5
10
15
HBL1372D
30
3
Aluminum
3
7.5
15
20
HBL1379D
Note: See page F-17 for technical information.
Circuit-Lock® NEMA 1 Enclosures without Switch
For use with switches shown on page F-17.
Description
HBL1390
HBL1370
No. Equipment
Grounds
Catalog Number
Cover Material
Base Material
For use with 30A switch.
Thermoplastic
Steel
1
HBL1390
For use with 30A switch.
Aluminum
Aluminum
2
HBL1370
Dimensions
HBL1370, HBL1372D and HBL1379D
HBL1390, HBL1389D and HBL1392D
3.97"
(100.8)
2.76"
(70.1)
3.20"
(81.2)
1/2" x 3/4"
Knockout
Each End
3.15"
(80.0)
2.41"
(61.3)
0.92"
(23.2)
2 - 1/2"
Knockouts
2.75"
(69.8)
4.72"
(120.0)
F-18
3.43"
(87.1)
2.65"
(67.3)
2.44"
(61.9)
2 - 0.265" (6.7)
Mounting Holes
Bottom
Dimensions in Inches (mm)
1/2" x 3/4"
Knockout
Each End
0.88"
(22.42)
2.38"
(60.5)
4.52"
(114.8)
2 - 0.265" (6.7)
Mounting Holes
Bottom
1.50"
(38.1)
2.00"
(50.8)
Back
Back
®
Wiring Device-Kellems
2 - 1/2" x 3/4"
Knockouts
www.hubbell-wiring.com
Switched Disconnects and Enclosures
NEMA 3/3R and 3R Disconnect Switches
“Suitable as Motor Disconnects”
Circuit-Lock® NEMA 3/3R Enclosures with Switch
Ideal for use on outdoor equipment.
HP Rating
Amp
Poles
30
Enclosure Material
2
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
2
5
10
15
Thermoplastic
600V AC
3Ø
Catalog Number
HBL13R22D
30
3
Thermoplastic
3
7.5
15
20
HBL13R23D
30
2
Aluminum
2
5
10
15
HBL13R12D†
30
3
Aluminum
3
7.5
15
20
HBL13R13D†
HBL13R23D
Note: See page F-17 for technical information.
*Drill weephole to alter from NEMA 3 to NEMA 3R.
†Equipped with HBLFG30 sidewall insulation barriers.
HBL13R13D
Dimensions
HBL13R22D and HBL13R23D
2.99"
(75.9)
4.76"
(120.9)
HBL13R12D and HBL13R13D
2.25"
(57.2)
0.30" (7.6)
Padlock Hole
ON
5.42"
(137.7)
2.93"
(74.4)
1.84"
(46.7)
4.55"
(115.6)
3.24"
(82.3)
OFF
2.22"
(56.4)
3 - 1/2"
Hubs
3.94"
(100.1)
4.51"
(114.6)
0.34" (8.6)
Padlock Hole
2.99"
(75.9)
Front
Side
Back
Front
Side
Circuit-Lock® NEMA 3R Enclosures with Switch
Ideal for use in outdoor environments.
HP Rating
Amp
Poles
30
2
Enclosure Material
Aluminum
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
2
5
10
600V AC
3Ø
Catalog Number
HBL13R92D
15
30
3
Aluminum
3
7.5
15
20
HBL13R89D
60
2
Aluminum
—
10
15
20
HBL16R92D
60
3
Aluminum
—
10
25
30
HBL16R93D
Note: For switch specifications refer to page F-17.
Circuit-Lock® NEMA 3R Enclosures without Switch
For use with switches shown on page F-17.
Description
Enclosure Material
Catalog Number
For use with 30A switch.
Aluminum
HBL13R90
For use with 60A switch.
Aluminum
HBL16R90
HBL13R89D
HBL16R93D
Dimensions
HBL13R90, HBL13R89D and HBL13R92D
HBL16R90, HBL16R92D and HBL16R93D
4.40" (111.8)
4.40"
(111.8)
5.52"
(140.2)
0.31" (7.9)
Padlock Hole
2 - 3/4"
Knockouts
3.30"
(83.3)
2.75"
(69.9)
1.06"
(26.9)
4.28"
(108.7)
1.99"
(50.5)
Front
Bottom
2 - 3/4" x 1"
Knockouts
10.11"
(256.8)
3.30" 2.75"
(83.8) (69.9)
1.52" (38.6)
0.31" (7.9)
Padlock Hole
2.00"
(50.8)
Front
Bottom
4.28" (108.7)
www.hubbell-wiring.com
®
Wiring Device-Kellems
Dimensions in Inches (mm)
F-19
Switches
30 Ampere, 600 Volts AC Manual Motor Controllers
“Suitable as Motor Disconnect”
30A 600V AC Manual Motor Controllers, Double Pole
2.25"
(57.1)
(4)
#10-32
TAP
3.28"
(83.3)
2.38"
(60.5)
3.78"
(96.0)
(2) .20 Dia.
Mtg. Holes
HBL7810D
3.97"
(100.8)
Description
Catalog Number
30A, double pole, single throw, AC manual motor controller,
black nylon handle, side and back wired.
HBL7832D
30A, double pole, single throw, AC manual motor controller,
black nylon handle, short toggle.
HBL7832DS
30A, double pole, single throw, AC manual motor controller.
50 piece bulk pack.
HBL7832DX
HBL7832D in HBL1390 Type 1 enclosure with non-metallic cover,
½ in. and ¾ in. knockouts on top, bottom and back of steel frame.
HBL1392D
HBL7832D in HBL1370 metal Type 1 enclosure.
HBL1372D
HBL7832D in NEMA 3R non-metallic enclosure.
HBL13R22D
HBL7832D in HBL13R90 metal Type 3R enclosure.
HBL13R92D
HBL7832D in NEMA 3R flip-lid enclosure.
HBL13R12D
Note: See page F-17 for technical information.
30A 600V AC Manual Motor Controllers, Three Pole
4.52"
(114.8)
2.62"
(66.5)
HBL1389D
2.25"
(57.2)
4.51"
(114.6)
3.94"
(100.1)
HBL13R13D
Description
Catalog Number
30A, three pole, single throw, AC manual motor controller,
black nylon handle, side and back wired.
HBL7810D
30A, three pole, single throw, AC manual motor controller,
black nylon handle, short toggle.
HBL7810DS
HBL7810D in HBL1390 Type 1 enclosure with non-metallic cover,
½ in. and ¾ in. knockouts on top, bottom and back of steel frame.
HBL1389D
HBL7810D in HBL1370 metal Type 1 enclosure.
HBL1379D
HBL7810D in NEMA 3R non-metallic enclosure.
HBL13R23D
HBL7810D in HBL13R90 metal Type 3R enclosure.
HBL13R89D
HBL7810D in NEMA 3R flip-lid enclosure.
HBL13R13D
30A, 600V, three pole, rotary controller in NEMA 4X
stainless steel enclosure.
HBL13S33D
30A, 600V, three pole, rotary controller in NEMA 4X non-metallic enclosure.
HBL13X33D
Note: See page F-17 for technical information.
Motor Rating
Product
3.20"
(81.3)
4.72"
(119.9)
2.41"
(61.2)
HBL1379D
120V AC
240V AC
480V AC
600V AC
Phase
30A Double Pole
2HP
5HP
10HP
15HP
1
30A Three Pole
3HP
7½HP
15HP
20HP
3
40A Double Pole
2HP
5HP
10HP
15HP
1
40A Three Pole
3HP
7½HP
15HP
20HP
3
50A Double Pole
2HP
5HP
10HP
15HP
1
50A Three Pole
3HP
7½HP
15HP
25HP
3
-
10HP
15HP
20HP
1
60A Double Pole
60A Three Pole
-
10HP
25HP
30HP
3
85A Double Pole
-
10HP
15HP
20HP
1
85A Three Pole
-
10HP
25HP
40HP
3
2.99"
(75.9)
4.40"
(111.8)
4.76"
(120.9)
0.30" (7.6)
Padlock Hole
6.96"
(176.8)
5.52"
(140.2)
6.75"
(171.5)
2.99" (75.9)
4.55" (115.6)
4.00"
(101.6)
3.00"
(76.2)
HBL13R23D
HBL13R89D
HBL13S33D
Dimensions in Inches (mm)
F-20
®
Wiring Device-Kellems
www.hubbell-wiring.com
AC Switches
40, 50, 60 and 85 Ampere, 600 Volts AC Manual Motor Controllers
“Suitable as Motor Disconnect”
IP44*
SUITABILITY
40A 600V AC Manual Motor Controllers
Description
Catalog Number
40A, double pole, single throw, AC manual motor controller,
black nylon handle, side wired.
HBL7842D
40A, three pole, single throw, AC manual motor controller,
black nylon handle, side wired.
HBL7843D
3.38"
(85.9)
.40"
(10.2)
3.28"
(83.3)
3.78"
(96.0)
Note: See page F-17 for technical information.
50A 600V AC Manual Motor Controllers
Description
Catalog Number
50A, double pole, single throw, AC manual motor controller,
black nylon handle, side wired.
HBL7852D
50A, three pole, single throw, AC manual motor controller,
black nylon handle, side wired.
HBL7853D
#10-32 TAP
2.82"
(71.6)
2.38"
(60.5)
.20" DIA
(5.1)
2.31"
(58.7)
1.5"
(38.1)
1.75"
(44.5)
HBL7862D
3.38"
(85.9)
Note: See page F-17 for technical information.
#10-32 TAP
.40"
(10.2)
3.28"
(83.3)
60A 600V AC Manual Motor Controllers
Description
Catalog Number
60A, double pole, single throw, AC manual motor controller,
black nylon handle, back wired.
HBL7862D
Same as HBL7862D except front wired.
HBL7862FWD
HBL7862FWD in Type 3R enclosure.
HBL16R92D
60A, three pole, single throw, AC manual motor controller,
black nylon handle, back wired.
HBL7863D
Same as HBL7863D except front wired.
HBL7863FWD
HBL7863FWD in a Type 3R enclosure.
HBL16R93D
60A, 600V, three pole, rotary controller in NEMA 4X
stainless steel enclosure.
HBL16S63D
60A, 600V, three pole, rotary controller in NEMA 4X
non-metallic enclosure.
HBL16X63D
3.78"
(96.0)
2.82"
(71.6)
2.31"
(58.7)
2.38"
(60.5)
.20" DIA
(5.1)
1.5"
(38.1)
1.75"
(44.5)
HBL7862FWD
4.40"
(111.8)
Note: See page F-17 for technical information.
10.11"
(256.8)
85A 600V AC Manual Motor Controllers
Description
Catalog Number
85A, double pole, single throw, AC manual motor controller,
black nylon handle, back wired.
HBL7882D
85A, three pole, single throw, AC manual motor controller,
black nylon handle, back wired.
HBL7883D
3.00"
(76.2)
Note: See page F-17 for technical information.
HBL16R93D
Motor Controller Accessories
Description
Catalog Number
Finger Guards, fit 30A, 40A and 50A controllers.
HBLFG30
Auxiliary Contacts, NO/Common/NC, for use in rotary switches only.
HBLAUX
6.95"
(176.5)
8.00"
(203.2)
4.00"
(101.6)
HBL16S63D
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
F-21
Switched Disconnects and Enclosures
NEMA 4X Disconnect Switches
“Suitable as Motor Disconnects”
Hinged Cover with
Removable Continuous Pin
Shared Features
Un-drilled case allows custom placement
of wire entry
304 Stainless Steel Enclosure
Chemical and corrosion resistant
Switch can be locked in the off position
as a method of compliance with OSHA
lockout/tagout
Valox® Handle and Collar
Chemical and impact resistant
Thermoplastic
4X Non-Metallic
Enclosures
HBL13S33D
Poured in Closed Cell
Neoprene Gasket
Interlocking Shaft and Handle
Prevents cover removal
when switch is on
Up to 2 Optional Auxiliary Contacts
For PLCs and external indicators
HBL13X33D
Circuit-Lock® NEMA 4X Enclosures with Switch and Accessories
Ideal for use in environments where wash-down is necessary, i.e. food processing, laboratories, etc.
HP Rating
Amp
HBL16S63D
HBL13X33D
Poles
Enclosure Material
120V AC
1Ø
240V AC
3Ø
480V AC
3Ø
600V AC
3Ø
Catalog Number
HBL13S33D
30
2
Stainless Steel
3
7.5
15
20
30
3
Valox
3
7.5
15
20
HBL13X33D
60
3
Stainless Steel
—
10
25
30
HBL16S63D
60
3
Valox
—
10
25
30
HBL16X63D
Finger Guard option for 30A switch.
HBLFG30
NO/Comon/NC auxiliary contact, 10A 120/250V AC for 30 and 60 Amp switches.
HBLAUX
Note: See page F-17 for technical information.
Dimensions
HBL13S33D
HBL16S63D
6.10"
(154.9)
6.95"
(176.5)
6.96"
(176.8)
4.00"
(101.6)
6.10"
(154.9)
8.00"
(203.2)
8.75"
(222.3)
6.00"
(152.4)
7.44"
(189.0)
9.44"
(239.8)
6.75"
(171.5)
4.25"
(108.0)
Front
Side
4.25"
(108.0)
Front
Side
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Dimensions in Inches (mm)
F-22
4.00"
(101.6)
®
Wiring Device-Kellems
www.hubbell-wiring.com
Switched Disconnects and Enclosures
Pendant Pushbutton Stations
CPB and PBS Series
IP55
SUITABILITY
CPB Series Compact Pendant Stations, Two Button, NEMA 4X
1.06"
(26.9)
Description
Catalog Number
Single-speed normally open-normally closed without mechanical interlock.
CPB20
Single-speed with mechanical interlock between pushbuttons.
CPB21
Two-speed with mechanical interlock between pushbuttons.
CPB22
Note: Included with product: nylon cord grip and sealing washer (must be installed to achieve NEMA 4X rating).
Indication label pack. Cord dia. range .375–.625 in. (9.5–15.9)
Ambient temperatures: 25°F to 140°F (32°C to 60°C).
Typical applications: Package electric motor hoists. Remote control of machinery.
9.13"
(231.9)
Contact Ratings, CPB Series
Single-Speed
Voltage
Current
AC
120V
6A
35% PF
240V
3A
DC
125V
1.1A
IND
250V
.55A
Two-Speed
Voltage
Current
AC
120V
3A
35% PF
240V
1.5A
2.38"
(60.5)
CPB21
Com.1
Ctr.
Top
N.O.1
Com.1
SUITABILITY
PBS Series Heavy Duty Pendant Pushbutton Stations, NEMA 3R
Description
Catalog Number
2 button, single speed.
2 button, two speed.
PBS2
PBS22
4 button, single speed.
4 button, two speed.
PBS4
PBS42
6 button, single speed.
6 button, two speed.
PBS6
PBS62
8 button, single speed.
8 button, two speed.
PBS8
PBS82
N.O.2
TAB
Top
Two Speed*
CPB22
IP44
N.C.1
N.O.1
N.O.2
Bott.
N.O.1
Single Speed*
CPB21
Bott.
Ctr.
Top
Momentary
(On / Off)
CPB20
Bott.
Wiring Diagram CPB2 Series
Ctr.
*Mechanical “floating ball” interlock
prevents activating both Pushbuttons
simultaneously.
Product Dimensions, PBS Series
Style
A
Approx. Wt. Assembled
Catalog Number
2 button
7.88" (200.0)
2.5 lbs
PBS2
4 button
13.69" (347.6)
4.5 lbs
PBS4
6 button
18.0" (457.2)
5.5 lbs
PBS6
8 button
22.31" (566.7)
7.5 lbs
PBS8
PBS6
Cable Entrance Threaded
1" (25.4) NPT I.D.
1.125" (28.6) O.D.
Note: Housing: Yellow vinyl rubber.
Contact Interrupting Ratings, PBS Series
Two-Speed Single Break
Voltage
Current
AC
120V
6A
35% PF
240V
3A
DC
125V
.4A
IND
250V
.2A
Single-Speed Double Break
Voltage
Current
AC
120V
6A
35% PF
240V
3A
DC
125V
1.1A
IND
250V
.55A
30mm
K.O.
A
3.25"
(82.6)
0.88"
(22.4)
3.50"
(88.9)
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
F-23
Switched Disconnects and Enclosures
Pendant Pushbutton Stations
Accessories and Replacement Parts
Replacement Inserts
PG2
PG6
MS2
When the insert switches are in need of replacement, simply unplug the old insert and plug in a new one.
Description
Catalog Number
Single speed insert momentary N.O. and N.C.
PG2
On-Off insert (no mechanical interlock). Momentary, start-stop, reset-stop.
PG6
2 or 3 speed insert, momentary. Used to a maximum of 3 speed points.
MS2
5 speed insert, momentary. Used to a maximum of 5 speed points. For five speed
applications replace an existing terminal board with the TB5 terminal board and
replace an existing insert with the five speed (MS5) insert.
MS5
MS5
Conversion Inserts
In addition to single speed and two speed applications, pre-assembled units can be adapted to
handle other applications.
TB2
Description
Catalog Number
Terminal board, required for each insert switch PG2, PG6 and MS2.
TB2
Terminal board, required for insert switch MS5.
TB5
Accessories
TB5
Description
Catalog Number
Indicator labels for replacement package contains 1 each: hoist, trolley, bridge,
forward-reverse, raise-lower, in-out, right left, east-west, north-south, reset-stop,
start-stop, power, main hoist, auxuliary hoist, on-off, up-down.
PBSLP
Rubber button cover for replacement purposes.
PBSBC
120V red pilot light for 4, 6, and 8 button units only.
PBSPL1*
Note: *Each pendant station can accommodate one of the pilot light in the 1.20 in. (30.6) diameter mounting hole.
PBSLP
PBSBC
Kellems® Deluxe Aluminum Cord Fitting
Outdoor or indoors where subject to moisture, splash or submersion. Kellems grips provide strain
relief for multi-conductor cable.
PBSPL1
Description
Cord Range
Catalog Number
Kellems grip.
.750"-.875" (19-22.2)
07401023
Kellems grip.
.875"-1.00" (22.2-25.4)
07401025
07401023
F-24
®
Wiring Device-Kellems
www.hubbell-wiring.com
Section G
Pin and Sleeve Devices/Mechanical Interlocks
Index
Product
Page
Configurations Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-3
IEC Pin and Sleeve
Watertight Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-6
Corrosion Resistant Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-8
Data Center Pin and Sleeve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-9
Back Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-10
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-11
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-12
Unfused Circuit-Lock® Mechanical Interlocks
Devices and “Reverse Service” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-17
Accessories and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-18
Fused Circuit-Lock® Mechanical Interlocks
Devices and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-21
Low Profile Pin and Sleeve
Devices and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-24
Low Profile Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-25
IEC Pin and Sleeve Terminal Identification . . . . . . . . . . . . . . . . . . . . . . . . . . G-26
UL 1686 C1 Insulgrip® Pin and Sleeve
Style I and Style II Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-30
“Reverse Service” Style I and II Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-31
Back Boxes and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-32
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-33
Insulgrip® Mechanical Interlocks
Style II, Fused and Unfused Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-37
Hazardous Location Devices
Mechanical Interlocks and Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-40
HBL® Watertight
IEC Pin and Sleeve
Insulgrip® NEMA 4X
UL 1686 C1 Pin and Sleeve
Circuit-Lock® Unfused and
Fused Mechanical Interlocks
Back Boxes & Accessories
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-1
Pin and Sleeve Devices
Summary
Hubbell Produces the Highest Quality
and Most Extensive Pin and Sleeve
Offering.
Similar to our Twist-Lock® devices, Hubbell’s Pin and
Sleeve line of plugs, connectors, inlets, receptacles,
mechanical interlocks and accessories are the highest
performing products available. The HBL® series of IEC
pin and sleeve and Insulgrip lines are assembled in the
USA and have a full list of innovative features.
IEC Watertight Devices
Provide safe and dependable
performance in the most
demanding environments. Heavy
duty non-conductive nylon
construction provides impact and
corrosion protection. Thermoset
polyester contact carriers withstand
high temperatures and provide
resistance to electrical tracking.
Insulgrip® NEMA 4X UL 1686
C1 Devices
Metallic where you want it and
non-metallic where you need it.
This tough product line is NEMA
4X rated for use in the harshest
environments. The devices are
fully interchangeable with other
manufacturers of UL1686
C1 devices.
Back Boxes and Accessories
A complete line of metallic
and non-metallic back boxes,
angle adapters, closure caps
and liquidtight adapters are
available. These accessories help
complement the line and aid in the
installation of the product.
G-2
The IEC line of plugs and connectors are made with a
rugged super tough, one-piece housing. The thermoset
polyester contact carrier provides a high resistance to
electrical tracking. They withstand higher temperatures
which may result from overload or arcing. The heavy-duty,
external cord grip provides superior strain relief on the
conductors.
The Insulgrip line of pin and sleeve is listed UL Type 4X
which provides a watertight, dust-tight seal for harsh
environments. The non-metallic bodies of the plugs and
connectors provide excellent insulating, impact and UV
resistant properties. The patented beryllium copper springpin design of the contacts maintains high unit pressure
on mating sleeves. This ensures reliable electrical contact
while minimizing heat rise. There are two styles of Insulgrip
pin and sleeve devices. Style I devices achieve grounding
by attaching the metallic shell to a ground terminal within
the device. Style II devices feature redundant grounding
by including an additional ground pin and sleeve to the
grounding method used in Style I. The full Insulgrip line of
devices is interchangeable with other manufacturers of
UL1686 C1 devices which makes it ideal for use in industrial
applications where multiple manufactures of product may
be present.
Both the IEC and Insulgrip lines of pin and sleeve are used
often in conjunction with mechanical interlocks. Mechanical
interlocks prevent users from mating or breaking the
circuit under load. This feature is critical to maintain a safe
electrical connection. The interlocks are also available in
reverse service applications where a generator is providing
power to an electrical system.
Circuit-Lock® Mechanical Interlocks
Hubbell’s Circuit-Lock enclosure
products virtually eliminate making
or breaking the circuit under load.
This revolutionary design incorporates
a disconnect switch and receptacle
in one compact non-metallic unit.
They are available in either a fused
or non-fused versions.
®
Wiring Device-Kellems
Low Profile Devices
90° Angled plugs and recessed
receptacles allow for connections
in tight spaces. Cords can be
controlled easily along the wall.
The integrated cord grips limit
strain on terminals and prevent
strain on plugs and cables exiting
perpendicular from the wall.
Corrosion Resistant Devices
This superior grade of IEC and
Insulgrip devices are ideal for the
most demanding environments.
Nickel-plated brass on the IEC and
nickel-plated Tellurium copper on
the Insulgrip contacts prevent
corrosion and heat rise.
Reverse Service
Generators and portable power
distribution units require devices to
deliver power in a reverse direction
to power up a piece of equipment
or building. Hubbell manufactures
reverse service devices in both the
IEC and Insulgrip Pin and Sleeve
configurations as well as IEC
Mechanical Interlock Inlets.
www.hubbell-wiring.com
IEC Pin and Sleeve
IEC Configurations Chart
Singly Rated Configurations
Voltage
Hubbell Pin and Sleeve products are designed and
manufactured to meet the International Standard IEC
60309-1 and IEC 60309-2. This device standard calls out
a singly rated, non-interchangeable configuration for every
voltage and type of service throughout the world. Pin and
sleeve device housings are color coded by voltage rating.
The voltage is determined by the location of the female
ground contact relative to the housing keyway. Simply by
manufacturing the device with a ground contact in a certain
“clock” position, the device will be rated for a particular
voltage system. The diagram shows the keying position and
the color coding that is associated with each voltage.
3Ø 250V
2P
Gr ole
ou
11 12 1
10
2
9
3
4
8
7 6 5
380415V
250V
DC 380V 50Hz
440V 60Hz
125V
AC
550V
DC
480V
AC
400V DC
3Ø
480V AC
Color
re
Wi
3 ing
nd
3ØY
120/208V
3
Gr Pol
ou e
n
125/250V
AC
ire
W
4 ing
d
440-460V
(60Hz)
ire
W
5 ng
di
4
Gr Pol
ou e
n
Rated Voltage
100V - 130V
125V/250V
200V - 250V
277V
380V - 480V
500V - 690V
277V
AC
250V
AC
380-415V
AC
3Ø
600V AC
3ØY
277/480V
3ØY
347/600V
200/346V AC
240/415V AC
Typical IEC Pin and Sleeve Catalog Number
HBL4100C12W
HBL 4 100 C 12 W
Hubbell Catalog Number
Watertight
4 Wire
Female Ground Sleeve at “12” O’Clock (125/250V)
100 Amp
Explanation
1 (HBL) Designates
Hubbell Catalog
Number
2 First Digit
3-3 wire
4-4 wire
5-5 wire
www.hubbell-wiring.com
3 Next Series Of Digits
Preceding a letter
20-20 Amp
30-30 Amp
60-60 Amp
100-100 Amp
“C” Connector
4 Letter
5 Last Digit(s)
P-Plug
After the letter. This denotes
R-Receptacle
the position of the ground
C-Connector
sleeve and the assigned
B-Inlet
voltage in the receptacle as
MI-Mechanical
it relates to the hours of the
Interlock
clock. This is done to eliminate
MIF-Mechanical interchangeability between
Interlock Fused
devices with different voltages.
®
Wiring Device-Kellems
6 Letter: W
Watertight
G-3
IEC Pin and Sleeve
RoHS
Watertight Devices
Features and Benefits
IP67
SUITABILITY
Self-Closing Gasketed Cover
Detents into position to fully close automatically.
Corrosion-resistant hardware
Liquidtight Conduit Adapters
Machined aluminum adapters are available to
provide a means for attaching flexible liquidtight
metal conduit to rear of Hubbell Pin and Sleeve
plug or connector
Watertight Neoprene Sealing Glands
Provide a reliable seal at the cable entry point.
Prevents infiltration of contaminants
Color Coded Housings
IEC pin and sleeve devices are color coded
by voltage for easy identification
Insulated Non-Metallic Housing
Super tough, non-conductive and chemical resistant for
heavy duty industrial environments
Powerful Mechanical Cord Grip
Hubbell’s design incorporates two
molded-in teeth to securely grip
the outer cable jacket, and internal
conductors to prevent slippage
and strain on terminations. Captive
barrel nuts ease assembly and
allow higher tightening torque for
maximum cord retention.
G-4
Watertight Cord Entrance
The tapered bore entrance
creates high compression
forces on sealing gland,
providing a watertight seal
around cord. Individual solid
neoprene glands are supplied
to match a full range of cord
sizes and assure watertight
performance.
®
Multi-Contact Spring
(60/63 and 100/125 Amp)
Recessed within the female
sleeve, provides and
maintains high unit pressure
on mating pins to minimize
temperature rise. Broaches
oxide film to achieve low
resistance contact for
cooler operation.
Wiring Device-Kellems
Sequential Contact
Engagement
Ground makes first and
breaks last. Neutral makes
second and breaks second
(to prevent a momentary
over-voltage on components
connected phase to neutral).
Phase contacts make last
and break first.
www.hubbell-wiring.com
IEC Pin and Sleeve
RoHS
Watertight Devices
Features and Benefits
IP67
SUITABILITY
Solid One-Piece Pins
Machined from solid brass
for longer life and reliable
electrical contact
Gasketed Sealing Ring
Provides watertight seal when mated
with receptacle or connector
Heavy Duty External Cord Grips
Provide maximum cord retention to
maintain secure terminations
Contact Collar
Raised collar surrounds each phase pin
increasing the tracking resistance between
contacts across the contact carrier face
Rugged One-Piece Housing
Thick wall construction protects
internal components, eliminates
joints preventing infiltration
of contaminants. Amperage/
voltage rating and catalog
number molded in housing for
easy identification.
www.hubbell-wiring.com
Shrouded Pins
Super tough plug shroud
protects pins from
deforming from physical
abuse. Protects the user
from the possibility of
touching live contacts
during insertion and
withdrawal of mating parts.
Lockout/Tagout
Tapered opening on plug
shroud accommodates up
to ³⁄₈ inch (9.7mm) lock
shackle diameter
Swivel Pressure Pads
16/20 and 30/32 Amp devices
feature patented swiveling
pressure pad terminal screws and
prevent damage to conductor
strands. 60/63 and 100/125 Amp
devices feature large hex-head
stainless steel screws which
provide higher torque levels for
secure terminations. The large
box terminals are designed for
North American conductors.
®
Thermoset Polyester
Contact Carrier
Molded thermoset polyester
provides high resistance to
electrical tracking. Withstands
higher temperatures which
may result from overload or
arcing. Thermoset properties
provide dimensional stability
for this critical assembly.
Wiring Device-Kellems
G-5
IEC Pin and Sleeve
RoHS
Watertight Devices
20 and 30 Ampere – North American Ratings, 16 and 32 Ampere – International Ratings
IP67
SUITABILITY
Rating
Poles
and
Amps Wires
16
20
30
32
Configuration
Recep./
Plug/
Conn.
Inlet
Watertight Devices
Plug
Accessories
Connector
Closure
Back Boxes
Non-Metallic Metallic Caps
AC Voltage
Receptacle
2P 3W
100-130V
HBL316R4W
HBL316P4W
HBL316C4W
HBL316B4W†
BB2030N
2P 3W
220-240V
HBL316R6W HBL316P6W
HBL316C6W
HBL316B6W
BB2030N
3P 4W
380-415V
HBL416R6W
HBL416P6W
HBL416C6W
HBL416B6W†
BB2030N
4P 5W
220/380V
240/415V
HBL516R6W HBL516P6W
HBL516C6W
HBL516B6W
BB2030N
2P 3W
125V
HBL320R4W HBL320P4W
HBL320C4W
HBL320B4W
BB2030N
2P 3W
250V
HBL320R6W HBL320P6W
HBL320C6W
HBL320B6W
BB2030N
2P 3W
480V
HBL320R7W HBL320P7W
HBL320C7W
HBL320B7W
BB2030N
3P 4W
125/250V
HBL420R12W HBL420P12W HBL420C12W HBL420B12W
BB2030N
3P 4W
3Ø 250V
HBL420R9W HBL420P9W
HBL420C9W
HBL420B9W
BB2030N
3P 4W
3Ø 480V
HBL420R7W HBL420P7W
HBL420C7W
HBL420B7W
BB2030N
3P 4W
3Ø 600V
HBL420R5W HBL420P5W
HBL420C5W
HBL420B5W
BB2030N
4P 5W
3ØY
120/208V
HBL520R9W HBL520P9W
HBL520C9W
HBL520B9W
BB2030N
4P 5W
3ØY
277/480V
HBL520R7W HBL520P7W
HBL520C7W
HBL520B7W
BB2030N
4P 5W
3ØY
347/600V
HBL520R5W HBL520P5W
HBL520C5W
HBL520B5W
BB2030N
2P 3W
125V
HBL330R4W HBL330P4W
HBL330C4W
HBL330B4W
BB2030N
2P 3W
250V
HBL330R6W HBL330P6W
HBL330C6W
HBL330B6W
BB2030N
2P 3W
480V
HBL330R7W HBL330P7W
HBL330C7W
HBL330B7W
BB2030N
3P 4W
125/250V
HBL430R12W HBL430P12W HBL430C12W HBL430B12W
BB2030N
3P 4W
3Ø 250V
HBL430R9W HBL430P9W
HBL430C9W
HBL430B9W
BB2030N
3P 4W
3Ø 480V
HBL430R7W HBL430P7W
HBL430C7W
HBL430B7W
BB2030N
3P 4W
3Ø 600V
HBL430R5W HBL430P5W
HBL430C5W
HBL430B5W
BB2030N
4P 5W
3ØY
120/208V
HBL530R9W HBL530P9W
HBL530C9W
HBL530B9W
BB2030N
4P 5W
3ØY
277/480V
HBL530R7W HBL530P7W
HBL530C7W
HBL530B7W
BB2030N
4P 5W
3ØY
347/600V
HBL530R5W HBL530P5W
HBL530C5W
HBL530B5W
BB2030N
2P 3W
100-130V
HBL332R4W† HBL332P4W† HBL332C4W† HBL332B4W†
BB2030N
2P 3W
220-240V
HBL332R6W HBL332P6W
HBL332C6W
HBL332B6W
BB2030N
3P 4W
380-415V
HBL432R6W HBL432P6W
HBL432C6W
HBL432B6W
BB2030N
3P 4W
380V 50Hz
440V 60Hz
HBL432R3W HBL432P3W
HBL432C3W
HBL432B3W†
BB2030N
4P 5W
220/380V
240/415V
HBL532R6W HBL532P6W
HBL532C6W
HBL532B6W
BB2030N
Inlet
Replacement Interiors
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
BB201W
BB301W
Recep./
Conn.
Plug/
Inlet
PC320
IN320BF IN320BM
PC320
IN320BF IN320BM
PC420
IN420DF IN420DM
PC520
IN520EF† IN520EM
PC320
IN320AF IN320AM
PC320
IN320BF IN320BM
PC320
IN320BF IN320BM
PC420
IN420CF IN420CM
PC420
IN420DF IN420DM
PC420
IN420DF IN420DM
PC420
IN420DF IN420DM
PC520
IN520EF† IN520EM
PC520
IN520EF† IN520EM
PC520
IN520EF† IN520EM
PC3430 IN330AF IN330AM†
PC3430 IN330BF IN330BM
PC3430 IN330BF IN330BM
PC3430 IN430CF IN430CM
PC3430 IN430DF IN430DM
PC3430 IN430DF IN430DM
PC3430 IN430DF IN430DM
PC530
IN530EF IN530EM
PC530
IN530EF IN530EM
PC530
IN530EF IN530EM
PC3430 IN330BF IN330BM
PC3430 IN330BF IN330BM
PC3430 IN430DF IN430DM
PC3430 IN430DF IN430DM
PC530
IN530EF IN530EM
Note: See page G-10 and G-11 for back boxes and accessories, G-12 and G-13 for product dimensions, G-14 and G-15 for product specifications and HP ratings.
See page G-11 for closure caps, purchased separately. PC320, PC420, PC520, PC3430, PC530 are not UL or CSA.
†Consult factory.
G-6
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
RoHS
Watertight Devices
60 and 100 Ampere – North American Ratings, 63 and 125 Ampere – International Ratings
IP67
SUITABILITY
Rating
Poles
and
Amps Wires
60
63
Configuration
Recep./
Plug/
Conn.
Inlet
Watertight Devices
AC Voltage
Receptacle
Plug
Accessories
Connector
Inlet
Closure
Back Boxes
Non-Metallic Metallic Caps
2P 3W
125V
HBL360R4W HBL360P4W
HBL360C4W
HBL360B4W
BB60N
2P 3W
250V
HBL360R6W HBL360P6W
HBL360C6W
HBL360B6W
BB60N
2P 3W
480V
HBL360R7W HBL360P7W
HBL360C7W
HBL360B7W
BB60N
3P 4W
125/250V
HBL460R12W HBL460P12W HBL460C12W HBL460B12W BB60N
3P 4W
3Ø 250V
HBL460R9W HBL460P9W
HBL460C9W
HBL460B9W
BB60N
3P 4W
3Ø 480V
HBL460R7W HBL460P7W
HBL460C7W
HBL460B7W
BB60N
3P 4W
3Ø 600V
HBL460R5W HBL460P5W
4P 5W
3ØY
120/208V
4P 5W
3ØY
277/480V
4P 5W
3ØY
347/600V
2P 3W
220-240V
3P 4W
380-415V
4P 5W
220/380V
240/415V
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
BB601W
BB602W
HBL460B5W
Recep./
Conn.
Plug/
Inlet
PC60
IN360AF
IN360AM
PC60
IN360BF
IN360BM†
PC60
IN360BF
IN360BM†
PC60
IN460CF
IN460CM
PC60
IN460DF
IN460DM
BB601W
PC60
BB602W
IN460DF
IN460DM
PC60
IN460DF
IN460DM
PC60
IN560EF
IN560EM†
PC60
IN560EF
IN560EM†
PC60
IN560EF
IN560EM†
PC60
IN360BFS
IN360BMS†
PC60
IN460DFS
IN460DMS
PC60
IN560EFS†
IN560EMS
PC100
IN3100AF
IN3100AM
PC100
IN3100BF
IN3100BM†
PC100
IN3100BF
IN3100BM†
BB601W
BB602W
BB601W
HBL560R9W HBL560P9W HBL560C9W HBL560B9W BB60N
BB602W
BB601W
HBL560R7W HBL560P7W HBL560C7W HBL560B7W BB60N
BB602W
BB601W
HBL560R5W HBL560P5W HBL560C5W HBL560B5W BB60N
BB602W
BB601W
HBL363R6W HBL363P6W HBL363C6W HBL363B6W BB60N
BB602W
BB601W
HBL463R6W HBL463P6W HBL463C6W HBL463B6W BB60N
BB602W
BB601W
HBL563R6W HBL563P6W HBL563C6W HBL563B6W BB60N
BB602W
BB1001W
HBL3100R4W HBL3100P4W HBL3100C4W HBL3100B4W BB100N
BB1002W
BB1001W
HBL3100R6W HBL3100P6W HBL3100C6W HBL3100B6W BB100N
BB1002W
BB1001W
HBL3100R7W HBL3100P7W HBL3100C7W HBL3100B7W BB100N
BB1002W
HBL460C5W
Replacement Interiors
BB60N
100 2P 3W
125V
2P 3W
250V
2P 3W
480V
3P 4W
125/250V
HBL4100R12W HBL4100P12W HBL4100C12W HBL4100B12W BB100N
BB1001W
PC100
BB1002W
IN4100CF†
IN4100CM
3P 4W
3Ø 250V
HBL4100R9W HBL4100P9W HBL4100C9W HBL4100B9W BB100N
BB1001W
PC100
BB1002W
IN4100DF
IN4100DM
3P 4W
3Ø 480V
HBL4100R7W HBL4100P7W HBL4100C7W HBL4100B7W BB100N
BB1001W
PC100
BB1002W
IN4100DF
IN4100DM
3P 4W
3Ø 600V
HBL4100R5W HBL4100P5W HBL4100C5W HBL4100B5W BB100N
BB1001W
PC100
BB1002W
IN4100DF
IN4100DM
4P 5W
3ØY
120/208V
HBL5100R9W HBL5100P9W* HBL5100C9W HBL5100B9W BB100N
PC100
IN5100EF
IN5100EM
4P 5W
3ØY
277/480V
HBL5100R7W HBL5100P7W HBL5100C7W HBL5100B7W BB100N
PC100
IN5100EF
IN5100EM
4P 5W
3ØY
347/600V
HBL5100R5W HBL5100P5W HBL5100C5W HBL5100B5W BB100N
PC100
IN5100EF
IN5100EM
125 2P 3W
220-240V
HBL3125R6W HBL3125P6W HBL3125C6W HBL3125B6W BB100N
PC100
IN3100BFS† IN3100BMS†
3P 4W
380-415V
HBL4125R6W HBL4125P6W HBL4125C6W HBL4125B6W
PC100
IN4100DFS
IN4100DMS
4P 5W
220/380V
240/415V
HBL5125R6W HBL5125P6W HBL5125C6W HBL5125B6W BB100N
PC100
IN5100EFS
IN5100EMS
BB100N
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
BB1001W
BB1002W
Note: See page G-10 and G-11 for back boxes and accessories, G-12 and G-13 for product dimensions, G-14 and G-15 for product specifications and HP ratings.
All 63A and all 125A devices have pilot pins or contacts.
See page G-11 for closure caps, purchased separately. PC60 and PC100 are not UL or CSA.
*See page G-12 for additional information on short housing plug. IP22 suitability - length 8.30" (210.8).
†Consult factory.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-7
IEC Pin and Sleeve
Corrosion Resistant Devices
100 Ampere Devices
IP67
Devices that Withstand the Most Abusive Environments
RoHS
SUITABILITY
Hubbell offers a superior grade of 100A IEC Pin and Sleeve designed for use in the most demanding environments. These
devices feature nickel plated solid brass pins for long life and reliable electrical contact in the most corrosive environments.
They have a high visibility yellow supertough nylon housing. The heavy duty external cord clamps provide maximum cord
retention to maintain secure terminations. The screws and fasteners are made from stainless steel.
• Food Processing
• Water Treatment
• Meat Packing
• Agriculture
• Factory
• Washdown
• Construction
• Outdoor Entertainment
• Temporary Power
Standard Service
Rating
Amps
100
Poles
And
Wires
Configuration
Recep./
Conn.
Plug
Watertight Devices
AC Voltage
Receptacle
Plug
Accessories
Connector
Back Boxes
Non-Metallic Metallic
Closure
Caps
3P 4W
125/250V
M4100R12
M4100P12
M4100C12
BB100N
BB1001W
BB1002W
PC100
4P 5W
3ØY
120/208V
M5100R9
M5100P9
M5100C9
BB100N
BB1001W
BB1002W
PC100
4P 5W
3ØY
277/480V
M5100R7
M5100P7
M5100C7
BB100N
BB1001W
BB1002W
PC100
"Reverse Service"
Rating
Amps
100
Poles
And
Wires
Configuration
Conn.
Inlet
Watertight Devices
Plug
Accessories
Connector
Back Boxes
Non-Metallic Metallic
Closure
Caps
AC Voltage
Inlet
3P 4W
125/250V
M4100B12R
—
M4100C12R
BB100N
BB1001W
BB1002W
PC100
4P 5W
3ØY
120/208V
M5100B9R
—
M5100C9R
BB100N
BB1001W
BB1002W
PC100
4P 5W
3ØY
277/480V
M5100B7R
—
M5100C7R
BB100N
BB1001W
BB1002W
PC100
Note: See page Z-17 for corrosion resistant cord sets.
G-8
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
Data Center Pin and Sleeve
IP67
DC Rated Pin and Sleeve Devices
RoHS
SUITABILITY
In today’s environmentally conscious world, energy savings is a pinnacle part of going green.
DC (Direct Current) is being used to reduce power consumption and decrease the amount of
infrastructure needed to energize specific types of data center equipment. Electrical devices
provide a means of connecting DC power.
Hubbell is the first manufacturer to introduce a series of IEC Pin and Sleeve devices
configured for the UL1686 eight o’clock ground position for DC voltage (Disconnecting use
only). Hubbell’s IEC DC rated pin and sleeve line has been qualified by UL to the requirements
of DC voltage. The thermoset polyester contact carrier provide high resistance to electrical
tracking, it withstands higher temperatures for this type of demanding application. The solid
one-piece pins are machined from solid brass for longer life and reliable electrical contact.
In addition, the heavy-duty external cord grips provide maximum cord retention to maintain
secure terminations. Finally, the super tough, color coded, non-conductive V-0 rated Valox®
housing is heavy duty for safety and protecting the internal components.
Rating
Amps
30
60
100
Poles
And
Wires
Configuration
Recep./
Conn.
Plug
Watertight Devices
DC Voltage
Receptacle
Plug
Connector
2P 3W
550V
HBL330R8WDC
HBL330P8V0DC
HBL330C8V0DC
2P 3W
550V
HBL360R8WDC*
HBL360P8V0DC
HBL360C8V0DC
2P 3W
550V
HBL3100R8WDC
HBL3100P8V0DC
HBL3100C8V0DC
4P 5W
400V
HBL5100R8WDC
HBL5100P8V0DC
HBL5100C8V0DC
Note: *Inlet available - HBL360B8WDC.
IP67
RoHS
SUITABILITY
Dual Certified Pin and Sleeve Devices
Hubbell’s dual certified pin and sleeve devices are ideal for the data center and high tech server industry. They are UL Listed
to UL1682 for the North American market and are TUV Rheinland Certified for the European and International market.
Customers can use the same plug and connector for multiple electrical configurations. They reduce the number of SKU’s
end users have to use if they sell to both domestic and overseas customers. These devices are IP67 rated, RoHs compliant
and showcase all the inherent safety benefits of their V-0 rated Valox® housing and internal components.
Rating
Amps
30/32
60/63
Poles
And
Wires
Configuration
Recep./
Conn.
Plug
Watertight Devices
AC Voltage
Receptacle
Plug
Connector
Inlet
3P 4W
380-415V
HBL430R6V02
HBL430P6V02
HBL430C6V02
HBL430B6V02
4P 5W
200/346V
240/415V
HBL530R6V02
HBL530P6V02
HBL530C6V02
HBL530B6V02
3P 4W
380-415V
HBL460R6V02
HBL460P6V02
HBL460C6V02
HBL460B6V02
4P 5W
200/346V
240/415V
HBL560R6V02
HBL560P6V02
HBL560C6V02
HBL560B6V02
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-9
IEC Pin and Sleeve
RoHS
Back Boxes
Back Boxes
Hubbell manufactures an extensive line of back boxes for use with IEC Pin and Sleeve devices. Each
back box is designed to give the user the maximum amount of wiring room while achieving grounding to
metallic conduit. Hubbell back boxes are available in non-metallic and cast metal versions.
Non-Metallic 15º Angle Back Box
Description
BB60N
NPT Hub Size*
Back box for 16, 20, 30 and 32A devices.
1"
Catalog Number
BB2030N
Back box for 60 and 63A devices.
1¼"
BB60N
Back box for 100 and 125A devices.
1½"
BB100N
Note: *Hub is not included; order one of the following Raco® part numbers: 1 in. = 1704, 1¼ in. = 1705, 1½ in. = 1706.
These boxes meets IP67 requirement and Type 4X requirements when installed with a watertight conduit hub.
Metallic 15º Angle Back Box**
Description
BB601W
NPT Hub Size
Catalog Number
Back box for 16, 20, 30 and 32A devices.
¾"
BB201W
1"
BB301W
Back box for 60 and 63A devices.
1¼"
BB601W
1½"
BB602W
1½"
BB1001W
2"
BB1002W
Back box for 100 and 125A devices.
Note: **These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
FW6010055
Metallic 55º Angle Back Box and Adapter**
Description
NPT Hub Size
Feed-thru box back box and adapter for 16, 20, 30 and 32A devices.
1"
Catalog Number
AB203055
AA203055
Angle adapter only.
Back box and adapter for 60, 63, 100 and 125A devices.
1½"
FW6010055
AA6010055
Angle adapter only.
Note: **These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
FT202W
Metallic Feed-Thru Back Box**
Description
NPT Hub Size
Feed-thru box for 16, 20, 30 and 32A devices.
Catalog Number
¾"
FT202W
1"
FT302W
Note: **These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
Metallic Four-Way 15º Angle Back Box**
Description
FW60100
NPT Hub Size
Four-way box for 60, 63, 100 and 125A devices.
1½"
Catalog Number
FW60100
Note: **These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
Straight Wall Box Adapter
Description
Catalog Number
Adapts 16, 20, 30 and 32A Watertight IEC Pin and Sleeve devices to
2-gang, device boxes and FD boxes.
HBL2030AP
HBL2030AP
Angle Wall Box Adapter
Description
Catalog Number
Adapts 16, 20, 30 and 32A Watertight IEC Pin and Sleeve devices to
standard wall boxes.
AA2030PS
Note: Adapts 20 and 30A Watertight Pin and Sleeve receptacle to single, 2-gang standard wall box and 4 or 4¹¹⁄₁₆⁄⁄ inch
square for non-watertight applications.
AA2030PS
G-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
Accessories
Closure Caps
Cap assemblies provide watertight sealing to a disconnected male IEC Pin and Sleeve plug or inlet.
Manufactured of the same tough non-metallic material as the watertight IEC Pin and Sleeve devices
for corrosion and abuse resistance.
Description
Catalog Number
Fits all 16 and 20A, 3 wire plugs and inlets.
Fits all 16 and 20A, 4 wire plugs and inlets.
Fits all 16 and 20A, 5 wire plugs and inlets.
PC320
PC420
PC520
Fits all 30 and 32A, 3 and 4 wire plugs and inlets.
Fits all 30 and 32A, 5 wire plugs and inlets.
PC3430
PC530
Fits all 60 and 63A plugs and inlets.
PC60
Fits all 100 and 125A plugs and inlets.
PC100
PC3430
Cover Assemblies
Replacement cover assemblies for use with watertight connector bodies and receptacles.
Kit contains cover, arm assembly and installation tool.
Description
Catalog Number
Fits all 16 and 20A, 3 wire watertight female devices.
Fits all 16 and 20A, 4 wire watertight female devices.
Fits all 16 and 20A, 5 wire watertight female devices.
CA320
CA420
CA520
Fits all 30 and 32A, 3 and 4 wire watertight female devices.
Fits all 30 and 32A, 5 wire watertight female devices.
CA3430
CA530
Fits all 60 and 63A watertight female devices.
CA60
Fits all 100 and 125A watertight female devices.
CA100
CA3430
Cord Clamp and Locking Ring
Replacement cord clamp and locking ring for use with IEC plugs, connectors and inlets.
Description
Cord Clamp and
Locking Ring
Locking Ring Only
Fits all 16 and 20A, 3 wire plugs, connectors and inlets.
Fits all 16 and 20A, 4 wire plugs, connectors and inlets.
Fits all 16 and 20A, 5 wire plugs, connectors and inlets.
CC320
CC420
CC520†
LR320*
LR420*
LR520*
Fits all 30 and 32A, 3 and 4 wire plugs, connectors and inlets.
Fits all 30 and 32A, 5 wire plugs, connectors and inlets.
CC3430
CC530†
LR3430*
LR530*
Fits all 60 and 63A plugs, connectors and inlets.
CC60
LR60*
Fits all 100 and 125A plugs, connectors and inlets.
CC100
LR100*
CC3430
LR3430
Note: *Locking Ring only for plugs and inlets.
†Consult factory.
Liquidtight Adapters
Machined aluminum adapters are available to provide a means for attaching flexible liquidtight metal
conduit to rear of a Hubbell Pin and Sleeve plug or connector. To install, remove cord grip and two gland
cap screws. Use screws to attach adapter. Kellems® liquidtight conduit connectors are available to control
arc of bend and to prevent conduit pull-out where vibration, motion or strain is present. These grips
interface directly with Hubbell’s liquidtight adapters and are available in a wide variety of NPT sizes and
configurations. Consult your local code grounding requirements before using liquidtight adapters.
Rating of Hubbell
Pin and Sleeve Device
Liquidtight
Conduit Size
Hubbell Liquidtight
Adapter
Optional Kellems
Liquidtight Conduit Grip
16 and 20 Amp
3 and 4 Wire
½" NPT
SAA12
074093402
¾" NPT
SAA34
074093403
16 and 20 Amp 5 wire
and 30 and 32 Amp
3 and 4 wire
½" NPT
SAB12
074093402
¾" NPT
SAB34
074093403
1" NPT
SAB100
074093404
30 and 32 Amp 5 wire
¾" NPT
SAC34
074093403
30 and 32 Amp 5 wire
and 60 and 63 Amp (all)
1" NPT
SAC100
074093404
1¼" NPT
SAC125
074093405
100 and 125 Amp (all)
1¼" NPT
SAD125
074093405
1½" NPT
SAD150
074093406
www.hubbell-wiring.com
®
Wiring Device-Kellems
SAB34
074093403
G-11
IEC Pin and Sleeve
Dimensions
Plug
Plug Dimensions
Type
B
A
Short Housing Plug
B
A
B
Cord Grip Range
HBL320P
6.61" (167.8)
2.87" (73.0)
.330"-.830" (8.4-21.1)
HBL420P
7.00" (177.8)
3.19" (81.0)
.330"-.830" (8.4-21.1)
HBL520P
7.65" (194.3)
3.50" (89.0)
.330"-.830" (8.4-21.1)
HBL330P
8.05" (204.5) 3.74" (95.0)
.375"-1.250" (9.5-31.8)
HBL430P
8.05" (204.5) 3.74" (95.0)
.375"-1.250" (9.5-31.8)
HBL530P
8.54" (216.9) 4.02" (102.0) .500"-1.450" (12.7-36.8)
HBL360P, HBL460P, HBL560P
10.15" (257.8) 4.49" (114.0)
.500"-1.450" (12.7-36.8)
HBL3100P, HBL4100P, M4100P,
HBL5100P, M5100P
12.63" (320.8) 4.92" (125.0)
1.065"-1.940" (27.1-49.3)
Short Housing Plug Dimensions
Type
A
A
HBL5100P9WSH
Connector Body
B
Cord Grip Range
8.30" (210.82) 4.92" (125.0)
1.065"-1.940" (27.1-49.3)
Connector Body Dimensions
Type
B
A
Inlet
B
D
A
B
Cord Grip Range
HBL320C
7.49" (190.3)
3.33" (84.6)
.330"-.830" (8.4-21.1)
HBL420C
7.90" (200.6) 3.66" (93.0)
.330"-.830" (8.4-21.1)
HBL520C
8.54" (216.9) 3.94" (100.0) .330"-.830" (8.4-21.1)
HBL330C
9.05" (229.9) 4.27" (108.5) .375"-1.250" (9.5-31.8)
HBL430C
9.05" (229.9) 4.27" (108.5) .375"-1.250" (9.5-31.8)
HBL530C
9.68" (245.8) 4.70" (119.5)
.500"-1.450" (12.7-36.8)
HBL360C, HBL460C, HBL560C
11.15" (283.2) 5.10" (129.5)
.500"-1.450" (12.7-36.8)
HBL3100C, HBL4100C, M4100C,
HBL5100C, M5100C
13.57" (344.7) 5.71" (145)
1.065"-1.940" (27.1-49.3)
Inlet Dimensions
A
Type
C
E
F
⁷⁄₃₂" (5.5) Dia. (4 Holes)
Receptacle
A
B
C
D
E
F
HBL320B
2.54" (64.5)
1.85" (47.0)
1.14" (29.0)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL420B
2.54" (64.5)
2.11" (53.6)
1.14" (29.0)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL520B
2.54" (64.5)
2.41" (61.2)
1.14" (29.0)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL330B
2.99" (76.0)
2.49" (63.2)
1.04" (26.5)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL430B
2.99" (76.0)
2.49" (63.2)
1.04" (26.5)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL530B
2.99" (76.0)
2.75" (69.9)
1.04" (26.5)
2.80" (71.0)
3.75" (95.3)
3.13" (79.5)
HBL360B,
4.04" (102.6)
HBL460B, HBL560B
2.97" (75.5)
1.18" (30.0)
3.46" (88.0)
4.50" (114.3)
3.88" (98.5)
HBL3100B,
4.53" (115)
HBL4100B, M4100B,
HBL5100B, M5100B
3.44" (87.5)
1.95" (49.5)
3.94" (100.0) 5.50" (139.7) 4.88" (124.0)
Receptacle Dimensions
A
D
B
E
F
⁷⁄₃₂" (5.5) Dia. (4 Holes)
Type
A
B
C
D
E
F
HBL320R
3.33" (84.5)
2.78" (70.6)
1.02" (26.0)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL420R
3.66" (93.0)
2.78" (70.6)
1.02" (26.0)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
C HBL520R
HBL330R
3.94" (100.0) 2.78" (70.6)
1.02" (26.0)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
4.27" (108.5) 3.09" (78.5)
1.16" (29.5)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL430R
4.27" (108.5) 3.09" (78.5)
1.16" (29.5)
2.72" (69.0)
3.75" (95.3)
3.13" (79.5)
HBL530R
4.70" (119.4)
3.09" (78.5)
1.16" (29.5)
2.83" (71.9)
3.75" (95.3)
3.13" (79.5)
HBL360R,
5.10" (129.5)
HBL460R, HBL560R
4.07" (103.4)
1.69" (43.0)
3.46" (88.0)
4.50" (114.3)
3.88" (98.6)
HBL3100R,
5.71" (145)
HBL4100R, M4100R,
HBL5100R, M5100R
4.23" (107.4)
2.46" (62.5)
3.95" (100.3) 5.50" (139.7) 4.88" (123.9)
Note: 20, 30, 60 and 100A devices are dimensionally equivalent to 16, 32, 63 and 125A devices, respectively.
Dimensions in Inches (mm)
G-12
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
Dimensions
Non-Metallic 15º Angle Back Box
E
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity
Catalog
Number
1"
5.67"
(144.0)
4.44"
(112.8)
4.05"
(102.9)
3.91"
(99.3)
2.35"
(59.7)
4.92"
(125.0)
30.00"
BB2030N
Back box for 60
& 63A devices.
1¼" 7.76"
(197.0)
5.16"
(131.0)
5.87"
(149.0)
4.72"
(120.0)
2.99"
(76.0)
6.94"
(176.0)
70.00"
BB60N
Back box for 100
& 125A devices.
1½" 8.21"
6.23"
(209.0) (158.0)
6.31"
(160.3)
5.71"
(145.0)
3.99"
(101.0)
7.41"
(188.0)
120.00"
Description
Back box for 16, 20,
30 & 32A devices.
F
C
A
15°
BB100N
B
D
Non-Metallic Angle Box
Note: *Hub is not included; order one of the following Raco® part numbers: 1 inch = 1704, 1¼ inch = 1705, 1½ inch = 1706.
These boxes meet IP67 requirement and Type 4X requirements when installed with a watertight conduit hub.
Metallic 15º Angle Back Box
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
E
F
Inch
(mm)
Cubic
Inch
Capacity
Catalog
Number
Back box for 16, 20,
30 & 32A devices.
¾"
5.12"
(130.2)
4.00"
(101.6)
4.19"
(106.4)
3.75"
(95.3)
3.00"
(76.2)
4.00"
(101.6)
30.00"
BB201W
Back box for 16, 20,
30 & 32A devices.
1"
5.12"
(130.2)
4.00"
(101.6)
4.19"
(106.4)
3.75"
(95.3)
3.00"
(76.2)
4.00"
(101.6)
30.00"
BB301W
Back box for 60
& 63A devices.
1¼" 7.25"
(184.2)
5.25"
(133.4)
6.00"
(152.4)
4.50"
(114.3)
3.75"
(95.3)
6.19"
(157.2)
80.00"
BB601W
Back box for 60
& 63A devices.
1½" 7.25"
(184.2)
5.25"
(133.4)
6.00"
(152.4)
4.50"
(114.3)
3.75"
(95.3)
6.19"
(157.2)
80.00"
BB602W
Back box for 100
&125A devices.
1½" 8.12"
6.75"
(206.4) (171.5)
6.88"
(174.6)
5.50"
(139.7)
4.75"
(120.7)
6.94"
(176.2)
130.00"
BB1001W
6.88"
(174.6)
5.50"
(139.7)
4.75"
(120.7)
6.94"
(176.2)
130.00"
BB1002W
Back box for 100
& 125A devices.
2"
8.12"
6.75"
(206.4) (171.5)
Metallic 55º Angle Back Box and Adapter
Description
NPT
Hub
Size
Feed-thru box and
angle adapter for 16,
20, 30 & 32A devices.
1"
Angle adapter for 16,
20, 30 & 32A devices.
–
Back box and angle
adapter for 60, 63,
100 & 125A devices.
Angle adapter for 60,
63, 100 & 125A devices.
–
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
6.80"
(172.4)
6.60"
(167.0)
5.63"
(142.9)
4.50"
(114.3)
3.74"
(95.0)
–
4.89"
(124.3)
3.33"
(84.6)
4.29"
(109.0)
3.75"
(95.2)
2.50"
(63.5)
–
25.00"
AA203055
8.00"
7.75"
(202.9) (196.8)
6.90"
(174.8)
6.00"
(152.4)
–
100.00"
FW6010055
4.48"
(113.7)
6.00"
(152.4)
6.75"
(171.4)
6.00"
(152.4)
–
79.00"
AA6010055
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
6.75"
(171.4)
C
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity
42.27"
F
15°
B
D
Metallic 15º Angle Box
E
B
C
A
A
Inch
(mm)
1½" 8.50"
(215.9)
A
55°
Catalog
Number
41
Description
NPT
Hub
Size
D
AB203055
Metallic 55º Angle Box
E
48 CU. IN.
C
A
F
Metallic Feed-Thru Back Box
Description
NPT
Hub
Size
A
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity
Catalog
Number
Feed-thru box for 16,
20, 30 & 32A devices.
¾"
8.25"
3.06"
(209.6) (77.8)
7.14"
(181.4)
4.50"
(114.3)
3.75"
(95.3)
3.13"
(79.5)
48.00"
FT202W
Feed-thru box for 16,
20, 30 & 32A devices.
1"
8.25"
3.06"
(209.6) (77.8)
7.14"
(181.4)
4.50"
(114.3)
3.75"
(95.3)
3.13"
(79.5)
48.00"
FT302W
B
Metallic Feed-Thru Box
D
E
B
Metallic Four-Way 15º Angle Back Box
A
Inch
(mm)
D
Description
NPT
Hub
Size
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
Four-way box for 60,
63, 100 & 125A devices.
1½" 8.75"
9.75"
(222.3) (247.7)
7.75"
(196.9)
6.75"
(171.5)
6.00"
(152.4)
F
Inch
(mm)
Cubic
Inch
Capacity
Catalog
Number
–
210.00"
FW60100
Note: These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
These boxes withstand a 500-hour salt spray test as well as UL rain tight and external icing test.
A
C
Metallic Four-Way Angle Box
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-13
IEC Pin and Sleeve
Listings and Specifications
IEC Pin and Sleeve Inlet, Connector Body, Plug and Receptacle
Watertight Materials
Part
Material
Inlet
Housing
Locking Ring
Mounting Flange
Mounting Screws
Contact Carrier
Retainer
Ground, Phase Pins
Terminal Screws
Assembly Screws (2)
Gaskets
Zytel® 101 Nylon*
Reinforced Thermoplastic Polyester
Zytel® 101 Nylon
Stainless Steel (300 Series)
High-Impact Thermoset
High-Impact Thermoset
Brass (M-Series - Nickel-plated brass)
Stainless Steel (300 Series)
Stainless Steel (300 Series)
Solid Neoprene
Connector Body
Housing
Cord Clamps
Glands
Cover Arms
Arm Springs
Covers
Cover Screw
Rotating Sealing Disc
Gaskets
Contact Carrier
Retainer
Phase, Ground Sleeves
Sleeve Spring
Terminal Screws
Assembly Screws
Zytel® ST801 Nylon
Reinforced Thermoplastic Polyester
Solid Neoprene
Reinforced Thermoplastic Polyester
Stainless Steel (17-7 type)
Reinforced Thermoplastic Polyester
Nickel-plated brass
Polycarbonate
Solid Neoprene
High-Impact Thermoset
High-Impact Thermoset
Brass
20A and 30A Stainless Steel (300 Series); others are Beryllium Copper
multi-contact inserts with silver plating
Stainless Steel (300 Series)
Stainless Steel (300 Series)
Listed to standard UL1682/CSA C22.2
No. 182.1-02, Plugs, Receptacles and
cable connectors of the Pin and Sleeve
Type.
UL Classified to IEC Standards 603091 (Plugs, Socket Outlets, and Couplers
for Industrial Purposes) for Series I
(European) rated voltages and services.
When used with cord, these devices
require no further investigation by UL
for equipment Classification to IEC 435
or IEC 380.
Plug
Housing
Locking Ring
Sealing Gasket
Cord Clamp
Gland Cap
Gland
Cord Clamp Screws
Clamp Nut
Gland Clamp Screws
Contact Carrier
Retainer
Ground, Phase Pins
Terminal Screws
Assembly Screws
Zytel® ST801 Nylon
Reinforced Thermoplastic Polyester
Solid Neoprene
Reinforced Thermoplastic Polyester
Reinforced Thermoplastic Polyester
Solid Neoprene
Stainless Steel (300 Series)
Nickel-Plated Brass
Stainless Steel (300 Series)
High-Impact Thermoset
High-Impact Thermoset
Brass (M-Series - Nickel-plated brass)
Stainless Steel (300 Series)
Stainless Steel (300 Series)
Receptacle
Housing
Mounting Flange
Arm Spring
Cover Arm
Cover
Cover Screw
Rotating Sealing Disc
Gaskets
Mounting Screws
Terminal Screws
Phase, Ground Sleeves
Sleeve Spring
Zytel® 101 Nylon
Zytel® 101 Nylon
Stainless Steel (17-7 type)
Reinforced Thermoplastic Polyester
Reinforced Thermoplastic Polyester
Nickel-plated brass
Polycarbonate
Solid Neoprene
Stainless Steel (300 Series)
Stainless Steel (300 Series)
Brass
20A and 30A Stainless Steel (300 Series); others are Beryllium Copper multi-contact inserts with silver plating
Specifications
Typical Specification
Manufacturer’s Identification
Description
Type
Rating
Configuration
Certification
Hubbell HBL520P9W
Plug, Power Supply
3 Pole + Neutral + Earth
20A, 120/208V AC, 3 Phase WYE
UL 1686 C2, IEC 60309-2, Clock Position 9, Watertight
UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors,
UL Standard UL1682 and UL 1686C2, CSA Certified File LR280C for Plugs,
Connectors Inlets and LR285C for Receptacle CSA StandardC22.2 No. 182.1,
UL Classified to IEC 60309-1 IEC 60309-2
Note: *All devices on page G-9 have Valox® housings.
® Zytel is registered trademark of E.I. DuPont.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
G-14
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
Specifications and Horsepower Ratings
Performance
Electrical
Dielectric Withstand Voltage
Max. Working Voltage
3000V AC.
600V RMS (i.e., minimum creepage distance 10 millimeters, minimum clearance 8 millimeters, per IEC 60309-1
for devices rated over 500V).
Certified for current interrupting at full rated current (Except DC rated devices).
Max. 30°C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power
factor of 75%.
5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles without
load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles without load for 100A and 125A.
Current Interrupting
Temperature Rise
Endurance
Mechanical
Impact Resistance
Cord Grip Cable Retention
Cord Accommodation
Per CSA C22.2 No. 182.1 / UL1682.
Per CSA C22.2 No. 182.1 / UL1682.
Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62,
CSA C22.2 No. 49 and the harmonized European Standards.
Terminals identified in accordance with North American and IEC conventions.
Identification and ratings are a permanent part of the device housing.
Terminal Identification
Product Identification
Environmental
Moisture Resistance
Ingress Protection
Flammability
Operating Temperatures
Watertight per IEC 60309-1.
IP67 Suitability.
HB or better per UL 94 or CSA C22.2 No. 0.17.
Maximum Continuous 75°C; Minimum - 40°C without impact.
Materials
Housings
All Other Materials
Nylon.
Resistant to corrosion and chemical attack.
Note: Specification sheets for all other Pin and Sleeve catalog numbers are available upon request.
Horsepower Ratings for IEC Pin and Sleeve
AC Voltage Rating
Horsepower
Catalog Number
3Ø 250
2
HBL420R9W
HBL420P9W
HBL420C9W
HBL420B9W
3Ø 480
5
HBL420R7W
HBL420P7W
HBL420C7W
HBL420B7W
3Ø 600
7.5
HBL420R5W
HBL420P5W
HBL420C5W
HBL420B5W
3ØY 120/208
.5
HBL520R9W
HBL520P9W
HBL520C9W
HBL520B9W
3ØY 277/480
5
HBL520R7W
HBL520P7W
HBL520C7W
HBL520B7W
3ØY 347/600
7.5
HBL520R5W
HBL520P5W
HBL520C5W
HBL520B5W
3Ø 250
3
HBL430R9W
HBL430P9W
HBL430C9W
HBL430B9W
3Ø 480
7.5
HBL430R7W
HBL430P7W
HBL430C7W
HBL430B7W
3Ø 600
10
HBL430R5W
HBL430P5W
HBL430C5W
HBL430B5W
3ØY 120/208
2
HBL530R9W
HBL530P9W
HBL530C9W
HBL530B9W
3ØY 277/480
7.5
HBL530R7W
HBL530P7W
HBL530C7W
HBL530B7W
3ØY 347/600
10
HBL530R5W
HBL530P5W
HBL530C5W
HBL530B5W
3Ø 250
5
HBL460R9W
HBL460P9W
HBL460C9W
HBL460B9W
3Ø 480
10
HBL460R7W
HBL460P7W
HBL460C7W
HBL460B7W
3Ø 600
15
HBL460R5W
HBL460P5W
HBL460C5W
HBL460B5W
3ØY 120/208
3
HBL560R9W
HBL560P9W
HBL560C9W
HBL560B9W
3ØY 277/480
10
HBL560R7W
HBL560P7W
HBL560C7W
HBL560B7W
3ØY 347/600
15
HBL560R5W
HBL560P5W
HBL560C5W
HBL560B5W
3Ø 250
10
HBL4100R9W
HBL4100P9W
HBL4100C9W
HBL4100B9W
3Ø 480
30
HBL4100R7W
HBL4100P7W
HBL4100C7W
HBL4100B7W
3Ø 600
30
HBL4100R5W
HBL4100P5W
HBL4100C5W
HBL4100B5W
3ØY 120/208
10
HBL5100R9W
HBL5100P9W
HBL5100C9W
HBL5100B9W
3ØY 277/480
30
HBL5100R7W
HBL5100P7W
HBL5100C7W
HBL5100B7W
3ØY 347/600
30
HBL5100R5W
HBL5100P5W
HBL5100C5W
HBL5100B5W
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-15
IEC Pin and Sleeve
Unfused Circuit-Lock® Pin and Sleeve Mechanical Interlocks
Features and Benefits
Large gears enclosed in a
gear box assembled on one
plane to eliminate possible
gear jumping
Color coded rating pad
and receptacle mount to
signify voltage
Lockable handle to
meet OSHA Lockout/
Tagout regulations
Two-stage interlocking
mechanism to help
defeat tampering
Pre-wired IEC Pin and
Sleeve receptacle
Watertight conduit hub
and grounding plate for
use on metallic conduit
(IP67 suitability)
Replaceable spring-loaded
liftcover with gasket for a
watertight seal
Solid pins—dependable
solid brass for longer
life and reliable
electrical contact
Captured neoprene
gasket for a
watertight seal
Horsepower rated
disconnect switch
handles large
motor loads
DIN rail mounted
switch for easy
installation and
replacement
HBL430MI7W
Enclosure housing with
brass inserts and stainless
steel screws for higher
torque and better sealing
Adjustable mounting
feet are ductile to
allow mounting on
irregular surfaces
Three molded-in
conduit drill points
are located on top,
bottom and back
surface of enclosure
HBL430MI7WR
(Reverse Service)
Hubbell Circuit-Lock® Mechanical Interlocks
The National Electrical Code (NEC®) requires a separate
disconnect means within sight of all motor loads. The NEC
requires the disconnecting means in a motor-circuit be
listed as “Suitable as Motor Disconnect” if the motor is
rated greater than 2 HP.
Hubbell’s revolutionary Circuit-Lock interlock incorporates
the disconnect switch and receptacle in one compact,
non-metallic and economical unit. Removing the plug and
locking it out provides a visual means of verifying equipment
has been disconnected. All Circuit-Lock mechanical
interlocks can be locked out as a method of compliance
with the OSHA Lockout/Tagout regulation.
The switch cannot be turned ON until the plug is completely
engaged, and the plug cannot be removed until the switch
is turned OFF. At the same time, it eliminates the possibility
of making or breaking the circuit under load or making a
casual or “lazy” connection. The non-metallic enclosure can
be connected to the metallic conduit and not interfere with
the ground continuity.
In addition, these horsepower rated units are durable,
watertight and easy to install. And they are compatible with
IEC 60309-2 plugs.
These Circuit-Lock units are available in 20, 30, 60 and
100A models, and in 3, 4 and 5 wire configurations that are
designed to the IEC 60309-1 and 60309-2 standards.
Hubbell’s Circuit-Lock Mechanical Interlocks are also
available in “Reverse Service” versions. These units
incorporate the disconnect switch and reverse service
receptacle (inlet) in one compact, non-metallic and
economical unit. These units are available in 30, 60 and
100A models, 4 wire configurations.
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
G-16
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
Unfused Circuit-Lock® Devices
20, 30, 60 and 100 Ampere – North American Ratings, 32 Ampere – International Rating
IP67
Enclosure Type 4X, 12
SUITABILITY
Unfused Circuit-Lock® Devices
Rating
Amps
Poles
and
Wires
Configuration
Recep.
Plug
AC Voltage
Mechanical Interlock
3P 4W
3Ø 240V
3P 4W
Mating Plug
—
HBL420MI9W
HBL420P9W
—
—
3Ø 480V
HBL420MI7W
HBL420P7W
—
—
3P 4W
3Ø 600V
HBL420MI5W
HBL420P5W
—
—
2P 3W
120V
HBL330MI4W
HBL330P4W
—
—
2P 3W
240V
HBL330MI6W
HBL330P6W
—
—
2P 3W
480V
HBL330MI7W
HBL330P7W
—
—
3P 4W
120/240V
HBL430MI12W
HBL430P12W
—
—
3P 4W
3Ø 240V
HBL430MI9W
HBL430P9W
HBL430MI9WR
HBL430P9WR
3P 4W
3Ø 480V
HBL430MI7W
HBL430P7W
HBL430MI7WR
HBL430P7WR
3P 4W
3Ø 600V
HBL430MI5W
HBL430P5W
HBL430MI5WR
HBL430P5WR
4P 5W
3ØY 120/208V
HBL530MI9W
HBL530P9W
—
—
4P 5W
3ØY 277/480V
HBL530MI7W
HBL530P7W
—
—
4P 5W
3ØY 347/600V
HBL530MI5W
HBL530P5W
—
—
32
3P 4W
380V 50HZ440V 60Hz
HBL432MI3W
HBL432P3W
—
—
60
2P 3W
120V
HBL360MI4W
HBL360P4W
—
—
2P 3W
240V
HBL360MI6W
HBL360P6W
—
—
2P 3W
480V
HBL360MI7W
HBL360P7W
—
—
3P 4W
120/240V
HBL460MI12W
HBL460P12W
HBL460MI12WR
HBL460P12WR
3P 4W
3Ø 240V
HBL460MI9W
HBL460P9W
HBL460MI9WR
HBL460P9WR
3P 4W
3Ø 480V
HBL460MI7W
HBL460P7W
HBL460MI7WR
HBL460P7WR
3P 4W
3Ø 600V
HBL460MI5W
HBL460P5W
HBL460MI5WR
HBL460P5WR
4P 5W
3ØY 120/208V
HBL560MI9W
HBL560P9W
—
—
4P 5W
3ØY 277/480V
HBL560MI7W
HBL560P7W
—
—
4P 5W
3ØY 347/600V
HBL560MI5W
HBL560P5W
—
—
2P 3W
240V
HBL3100MI6W
HBL3100P6W
—
—
3P 4W
120/240V
HBL4100MI12W
HBL4100P12W
HBL4100MI12WR
HBL4100P12WR
3P 4W
3Ø 240V
HBL4100MI9W
HBL4100P9W
HBL4100MI9WR
HBL4100P9WR
3P 4W
3Ø 480V
HBL4100MI7W
HBL4100P7W
HBL4100MI7WR
HBL4100P7WR
3P 4W
3Ø 600V
HBL4100MI5W
HBL4100P5W
HBL4100MI5WR
HBL4100P5WR
4P 5W
3ØY 120/208V
HBL5100MI9W
HBL5100P9W
100
HBL420MI12W
Mechanical Interlock
HBL420P12W
30
3P 4W
Mating Plug
—
20
120/240V
Reverse Service
—
—
Note: 20, 30 and 32A – 1 inch NPT hub supplied; 60 and 100A – 1¼ inch hub supplied.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-17
IEC Pin and Sleeve
Circuit-Lock® Pin and Sleeve Mechanical Interlocks
Accessories and Dimensions
Auxiliary Contacts for 20, 30, 32, 60 and 100A Switch, NEMA A600 Pilot Duty
Description
Catalog Number
“Break After Main Break”, 1 set of n/o contacts, 1 set of n/c contacts.
“Break Before Main Break”, 1 set of n/o contacts.
HBLAC1
HBLAC2
Ground Block
HBLAC1
Description
Catalog Number
For 20, 30 and 32A switches.
For 60 and 100A switches.
HBL30RGB
HBL60100RGB
Neutral Block
HBLAC2
Description
Catalog Number
For 20, 30 and 32A switches.
For 60A switches.
For 100A switches.
HBL30RNB
HBL60RNB
HBL100RNB
Watertight Closure Plug Kits
Description
Catalog Number
For 20, 30 and 32A Circuit-Lock Unfused and Fused Pin and Sleeve mechanical interlocks.
For 60 and 100A Circuit-Lock Unfused and Fused Pin and Sleeve mechanical interlocks.
MICPK30
MICPK60
Replacement Flip Covers
HBL30RNB
HBL30RGB
Description
Catalog Number
For 20A mechanical interlocks.
For 30 and 32A, 3 and 4 wire mechanical interlocks.
For 30A, 5 wire mechanical interlocks.
For 60A mechanical interlocks.
For 100A mechanical interlocks.
CA420MI
CA3430MI
CA530MI
CA60MI
CA100MI
Replacement Switches
Description
Catalog Number
For 20A mechanical interlocks.
For 30 and 32A mechanical interlocks.
For 60 and 100A mechanical interlocks.
HBLDS3RS
HBL30MIRS
HBLDS60100RS
Replacement Mounting Feet
MICPK30
Description
Catalog Number
For 20, 30, 32, 60 and 100A mechanical interlocks.
HBLRFT2*
Dimensions
20A and 30A
Inches (mm)
KEY
CA3430MI
HBL30MIRS
A
B
C
D
E
F
G
H
I
J
K
L
M
HUB SIZE
7.75" (196.9)
6.87" (174.5)
4.75" (120.7)
1.02" (25.9)
1.60" (40.6)
11.00" (279.4)
8.75" (222.3)
8.00" (203.2)
10.12" (257.0)
6.88" (174.8)
1.93" (49.0)
11.25" (285.8)**
7.75" (196.9)
1.00" NPT
60A
Inches (mm)
100A
Inches (mm)
7.75" (196.9)
6.87" (174.5)
4.75" (120.7)
1.02" (25.9)
1.46" (37.1)
12.75" (323.9)
8.75" (222.3)
9.75" (247.7)
11.87" (301.5)
6.88" (174.8)
2.09" (53.1)
13.65" (346.7)
8.60" (218.4)
1.25" NPT
7.75" (196.9)
6.87" (174.5)
4.75" (120.7)
1.02" (25.9)
1.46" (37.1)
12.75" (323.9)
8.75" (222.3)
9.75" (247.7)
11.87" (301.5)
6.88" (174.8)
2.09" (53.1)
13.65" (346.7)
9.30" (236.2)
1.25" NPT
Note: *Package of 10 feet and 10 screws.
**30 and 32A, 3 and 4W = 11.50" (292.1);
30A, 5W = 11.59" (294.4).
A
B
C
D
E
J
F
K
H
L
I
HBLRFT2
G
Dimensions in Inches (mm)
G-18
®
Wiring Device-Kellems
M
www.hubbell-wiring.com
IEC Pin and Sleeve
Unfused Circuit-Lock®
Specifications and Horsepower Ratings
Typical Specifications
Manufacturer’s Identification
Description
Electrical Type
Rating
Configuration
Enclosure Type
Ingress Protection
Enclosure Material
Certification
Hubbell HBL430MI7W
Circuit-Lock® Pin and Sleeve Mechanical Interlock
3 Pole + Earth
30A, 480V AC, 3 Phase
IEC 60309-2, UL1686 C2, Clock position 7
Outdoor - 4X (Watertight, Washdown); Indoor - 12 (Dust-tight, Falling Dirt and Noncorrosive Liquids)
IP67 Suitability
Non-metallic, enclosure suitable for metallic conduit
UL Listed, CSA Certified
Note: This device provides on/off switched control of a plug connected load and includes an interlocking feature to prevent the plug from being disconnected while the
receptacle is energized. The switch cannot be turned “ON" until the plug is inserted properly, and the plug cannot be removed until the switch is turned “OFF."
Materials
Part
Material
Part
Material
Base
Handle
Enclosure Gasket
Shaft Seal
Enclosure Screws
Hinge Pins
Valox®
Valox®
Neoprene
Neoprene
Stainless Steel 300 Series
Nickel Plated Brass
Top
Conduit Hub
Shaft
Ground Plate
Enclosure Inserts
Hinge Spring
Valox®
Zinc
Valox®
Galvanized Steel
Brass
Stainless Steel 300 Series
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Withstand Rating
Operations
Withstands 3,000V AC Min.
600V AC RMS.
Certified for current interrupting at full rated current and voltage.
Suitable for use on a circuit capable of delivering not more than 10,000 RMS symmetrical amperes at the voltage rating of the
receptacle. 20A and 30A models: Suitable for use on a circuit capable of delivering not more than 65,000 RMS symmetrical
amperes, 600V when protected by class “J” fuses rated 30A.
Mechanical 10,000 cycles, electrical 6,000 cycles.
Mechanical
Impact Resistance
Terminal Identification
Product Identification
Mounting
In accordance with UL 746C.
In accordance with UL, CSA and international conventions.
Identification and ratings are part of the external label and molded into the receptacle mount.
External adjustable feet.
Environmental
Moisture Resistance
Ingress Protection
Flammability
Operating Temperature
UV Resistance
Outdoor - 4X (Watertight, Washdown); Indoor - 12 (Dust-tight, Falling Dirt and Noncorrosive Liquids).
IP67 Suitability.
UL94-5VA and V-0 Classification.
Max. Continuous +75°C; Min. Continuous -40°C.
All materials are UV stabilized.
Horsepower Ratings
Amps
AC Voltage Rating
Horsepower
Mechanical Interlock
Mating Plug
20
20
20
20
30
30
30
30
30
30
30
30
30
30
32
60
60
60
60
60
60
60
60
60
60
100
100
100
100
100
100
120/240V AC
3Ø 240V AC
3Ø 480V AC
3Ø 600V AC
120V AC
240V AC
480V AC
120/240V AC
3Ø 600V AC
3Ø 480V AC
3Ø 250V AC
3ØY 347/600V AC
3ØY 277/480V AC
3ØY 120/208V AC
380V AC 50Hz – 440V AC 60Hz
120V AC
240V AC
480V AC
120/240V AC
3Ø 600V AC
3Ø 480V AC
3Ø 250V AC
3ØY 347/600V AC
3ØY 277/480V AC
3ØY 120/208V AC
240V AC
120/240V AC
3Ø 600V AC
3Ø 480V AC
3Ø 250V AC
3ØY 120/208V AC
2
5
5
10
2
3 (208-240V AC)
7.5
3 (208-240V AC)
20
15
7.5
20
15
5
15 (440V AC 3Ø 60Hz)
3
7.5 (208-240V AC)
20
7.5 (208-240V AC)
40
30
15
40
30
15
15 (10 @ 208V AC)
15
50
50
25 (208-240V AC)
20
HBL420MI12W
HBL420MI9W
HBL420MI7W
HBL420MI5W
HBL330MI4W
HBL330MI6W
HBL330MI7W
HBL430MI12W
HBL430MI5W
HBL430MI7W
HBL430MI9W
HBL530MI5W
HBL530MI7W
HBL530MI9W
HBL432MI3W
HBL360MI4W
HBL360MI6W
HBL360MI7W
HBL460MI12W
HBL460MI5W
HBL460MI7W
HBL460MI9W
HBL560MI5W
HBL560MI7W
HBL560MI9W
HBL3100MI6W
HBL4100MI12W
HBL4100MI5W
HBL4100MI7W
HBL4100MI9W
HBL5100MI9W
HBL420P12W
HBL420P9W
HBL420P7W
HBL420P5W
HBL330P4W
HBL330P6W
HBL330P7W
HBL430P12W
HBL430P5W
HBL430P7W
HBL430P9W
HBL530P5W
HBL530P7W
HBL530P9W
HBL432P3W
HBL360P4W
HBL360P6W
HBL360P7W
HBL460P12W
HBL460P5W
HBL460P7W
HBL460P9W
HBL560P5W
HBL560P7W
HBL560P9W
HBL3100P6W
HBL4100P12W
HBL4100P5W
HBL4100P7W
HBL4100P9W
HBL5100P9W
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-19
IEC Pin and Sleeve
Fused Circuit-Lock® Pin and Sleeve Mechanical Interlocks
Features and Benefits
Non-metallic enclosure meets UL 50E Type 4X
(watertight), 12 (dust-tight) and IP66 suitability
requirements. Enclosure is molded of rugged
thermoplastic Valox® to resist abuse, corrosion
and enhance safety. All external hardware is
stainless steel
Three molded-in conduit drill points
are located on the top, bottom, and
back surface of enclosure. Conduit
hub provided: 30A 1 inch NPT,
60A 1¼ inch NPT
Adjustable mounting feet (4)
can be mounted in any 1 of 3
positions for ease of installation
The patented Plug-Check™
mechanism detects the presence
of the plug. It operates as a
clutch to engage the handle with
the switch and captures the plug.
This action prevents the plug
from being removed until the
switch is turned OFF
High visibility red handle can be
locked in the OFF position as
a method of compliance with
OSHA lockout requirements.
Accepts up to a ⁵⁄₁₆ inch
padlock shackle
Removable door
for ease of wiring
and installation
Replaceable spring-loaded receptacle
liftcover with gasket ensures dust tight
rating; liftcover provides watertight seal
when turned and locked
Compact Fused Disconnect
Switch accepts Class “J” fuses.
Fuse holders are top mounted for
easy access. The switch accepts
auxiliary contacts for control circuit
applications including the ON/OFF
control of remote pilot lights or
signal for programmable controllers.
HBL460MIF5W
Thermoset polyester contact
carrier provides resistance
to electrical tracking and
withstands higher temperatures.
Thermoset properties provide
excellent dimensional stability,
low moisture absorption, and
superior dielectric strength.
Conduit hub and mounting feet are supplied
with each IEC Mechanical Interlock
Stainless steel ¼ inch
turn door fasteners
for quick, easy
access to fuses.
Enclosure door can
be locked to prevent
unauthorized access.
Additionally, if the switch
is ON, the door can not
be opened.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
G-20
®
Wiring Device-Kellems
www.hubbell-wiring.com
IEC Pin and Sleeve
Fused Circuit-Lock® Devices and Accessories
30 and 60 Ampere – North American Ratings
Enclosure Type 4X, 12
IP66
SUITABILITY
Fused Circuit-Lock® Devices
Rating
Amps
Poles
and
Wires
30
60
Configuration
Recep./
Plug/
Conn.
Inlet
AC Voltage
Mechanical Interlock
Mating Plug
3P 4W
120/240V
HBL430MIF12W
HBL430P12W
3P 4W
3Ø 240V
HBL430MIF9W
HBL430P9W
3P 4W
3Ø 480V
HBL430MIF7W
HBL430P7W
3P 4W
3Ø 600V
HBL430MIF5W
HBL430P5W
4P 5W
3ØY 277/480V
HBL530MIF7W
HBL530P7W
4P 5W
3ØY 347/600V
HBL530MIF5W
HBL530P5W
3P 4W
120/240V
HBL460MIF12W
HBL460P12W
3P 4W
3Ø 240V
HBL460MIF9W
HBL460P9W
3P 4W
3Ø 480V
HBL460MIF7W
HBL460P7W
3P 4W
3Ø 600V
HBL460MIF5W
HBL460P5W
4P 5W
3ØY 120/208V
HBL560MIF9W
HBL560P9W
Gray Style Switch
HBLACFSNO
HBL30MIFRS
Black Style Switch
Note: 30A – 1 inch NPT hub supplied; 60A – 1¼ inch hub supplied.
Replacement Auxiliary Contacts
ACFSNO
Description
Black Style Switch
Catalog Number
Gray Style Switch
Catalog Number
Auxiliary contact, normally open, A600 pilot duty, break before break.
ACFSNO
HBLACFSNO
Auxiliary contact, normally closed, A600 pilot duty, break before break.
ACFSNC
HBLACFSNC
30MIFRS
Note: Auxiliary contacts are specific to the style switch noted and are NOT interchangeble.
Replacement Switches
Description
Black Style Switch
Catalog Number
Gray Style Switch
Catalog Number
For 30A fused switches.
30MIFRS
HBL30MIFRS
—
HBL60MIFRS
For 60A fused switches. Gray Style switch will retro fit Black Style switch.
MICPK30
Note: If replacing a Black Style switch, you must use the 30MIFRS. All other applications can use the Gray Style switch.
Watertight Closure Plug Kits
Description
Catalog Number
For 30A Circuit-Lock® unfused and fused Pin and Sleeve mechanical interlocks.
For 60 and 100A
Circuit-Lock®
MICPK30
unfused and fused Pin and Sleeve mechanical interlocks.
MICPK60
Replacement Flip Covers
Description
Catalog Number
For 30A, 3 and 4 wire mechanical interlocks.
CA3430MI
For 30A, 5 wire mechanical interlocks.
CA530MI
For 60A mechanical interlocks.
CA60MI
CA3430MI
Replacement Mounting Feet
Description
Catalog Number
Replacement mounting feet and screws for 30 and 60A fused mechanical interlocks.
HBLRFT2 ∆
Note: ∆ Package of 10 feet and 10 screws.
www.hubbell-wiring.com
HBLRFT2
®
Wiring Device-Kellems
G-21
IEC Pin and Sleeve
Fused Circuit-Lock®
Specifications and Horsepower Ratings
Specifications
Materials
Typical Specifications
Part
Material
Base and Top
Handle
Conduit Hub
Enclosure Gasket
Shaft
Shaft Seal
Ground Plate
Enclosure Screws
Mounting Inserts
Hinge Pin
Hinge Spring
Valox®
Valox®
Zinc, 30A-1", 60A-1¼" NPT
Neoprene
Brass
Neoprene
Galvanized Steel
Stainless Steel
Brass
Nickel-Plated Brass
Stainless Steel
Manufacturer’s Identification
Description
Electrical Type
Rating
Configuration
Enclosure Type
Certification
Hubbell HBL460MIF7W
Fused Circuit-Lock Pin and Sleeve Mechanical Interlock
3 Pole + Earth
60A, 480V AC, 3 Phase
IEC 60309-2, UL1686C2, Clock Position 7
Outdoor - 4X (Watertight, Washdown)
Indoor - 12 (Dust-tight, Falling dirt)
UL Listed for US and Canada
Note: This device provides fused switched control of a plug connected load and includes an interlocking feature to prevent the plug from being disconnected or the fuse
door opened while the receptacle is energized. The switch cannot be turned on until the plug is inserted properly.
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Withstand Rating
Withstands 3,000V AC Min.
600V AC.
Certified for current interrupting at full rated current and voltage.
Suitable for use on a circuit capable of delivering not more than 200,000 RMS symmetrical amperes
at the voltage rating of receptacle.
Mechanical 10,000 cycles minimum.
Operations
Mechanical
Impact Resistance
Terminal Identification
Product Ratings
Mounting
In accordance with UL 746C.
In accordance with UL, CSA and international conventions.
Ratings are part of the external label and molded into the receptacle mount and color-coded.
External adjustment feet.
Environmental
Moisture Resistance
Ingress Protection
Flammability
Operating Temperatures
UV Resistance
Fuse Types
Outdoor - 4X (Watertight, Washdown); Indoor - 12 (Dust-tight, Falling dirt).
IP66 Suitability.
UL94-5VA and V-0 Classification.
Max. Continuous +75°C; Min. Continuous -40°C.
All materials are UV stabilized.
UL Listed Class “J”. CSA Certified HRCI-J.
Horsepower Ratings
Amps
AC Voltage Rating
Standard
Maximum**
Mechanical Interlock
Use Pin and Sleeve Plug
30
30
30
30
30
30
3Ø 600V AC
3Ø 480V AC
3Ø 240V
120/240V AC
3ØY 277/480V
3ØY 347/600V
7.5
5
3
1.5*
5
7.5
20
15
7.5
3*
15
20
HBL430MIF5W
HBL430MIF7W
HBL430MIF9W
HBL430MIF12W
HBL530MIF7W
HBL530MIF5W
HBL430P5W
HBL430P7W
HBL430P9W
HBL430P12W
HBL530P7W
HBL530P5W
60
60
60
60
60
3Ø 600V AC
3Ø 480V AC
3Ø 240V AC
120/240V AC
3ØY 120/208V
15
15
7.5
3*
7.5
50
30
15
10*
15
HBL460MIF5W
HBL460MIF7W
HBL460MIF9W
HBL460MIF12W
HBL560MIF9W
HBL460P5W
HBL460P7W
HBL460P9W
HBL460P12W
HBL560P9W
Note: *208-240V AC L-L.
**Requires time delay fuses.
Dimensions
7.27" (184.7)
1.51" (38.4) 30A
1.68" (42.7) 60A
10.18" (258.6)
9.31" (236.5)
3.60"
(91.4)
7.19"
(182.6)
11.46"
(291.6)
12.37"
(314.2)
15.03"
(381.8)
14.48"
(367.8)
15.36"
(390.1)
2.69" (68.3) 30A
2.83" (71.9) 60A
8.43" (214.1)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Dimensions in Inches (mm)
G-22
®
Wiring Device-Kellems
www.hubbell-wiring.com
Pin and Sleeve
RoHS
20 and 30 Amps Low Profile
Features and Benefits
Brass Box Terminal
Permits high clamping
pressure on conductors
without damaging wire strands
for best electrical conductivity
Nylon Construction
Both interior and exterior are
made of tough, durable nylon
Split Sleeves
Split sleeves with self-adjusting stainless steel springs
assure constant contact pressure (20A and 30A).
On 60A devices, Beryllium Copper insert with multiple
contact points assures easy insertion and a tight fit
Stainless Steel Terminal Screws
Resist rust and corrosion
Solid One-Piece Pins
Solid construction. Long life,
reliable electrical contact and
maximum conductivity
Terminal Identification
Large markings for easy
recognition results in ease
of wiring on the assembly
line or in the field
Shrouding
Recessed pins are protected
from impact and abuse
Color Coding
Quick, easy visual identification
of mating devices
Product Identification
Ratings and certification are
molded into the nylon housing.
Benefit: Easy identification for reorder
Integrated Cord Grip
Limits strain on terminals,
keeps cord connected
L420P9
www.hubbell-wiring.com
L420R9
®
Wiring Device-Kellems
G-23
Pin and Sleeve
RoHS
Low Profile Devices and Specifications
20, 30 and 60 Ampere - North American Ratings
Low Profile Devices
Rating
Amps
Poles
and
Wires
20
Devices
Cord Diameter
Configuration
Recep./ Plug/
Conn.
Inlet
Min. Max.
Inches (mm)
AC Voltage
Plug
Receptacle
3P 4W
3Ø 250V
L420P9
L420R9
.350" - .710"
(8.3 - 15.9)
30
3P 4W
125/250V
L430P12
L430R12
.390" - .775"
(9.9 - 19.7)
30
3P 4W
3Ø 250V
L430P9
L430R9
.390" - .775"
(9.9 - 19.7)
Amps
Poles
and
Wires
Plug
Receptacle
60
3P 4W
A460P9
A460R9
Amps
Poles
and
Wires
Plug
Receptacle
60
4P 5W
3ØY 120/208V
A560P9
HBL560R9W
.89" - 1.42"
(22.6 - 36.1)
100
4P 5W
3ØY 120/208V
A5100P9
HBL5100R9W
1.34" - 1.50"
(34.0 - 38.1)
Configuration
Recep./ Plug/
Conn.
Inlet
AC Voltage
3Ø 250V
AC Voltage
Dielectric Withstand Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
3000V AC.
250V RMS.
Certified for current interruption at full rated current.
Max. 30 C temperature rise at full rated current
after 50 cycles of overload at 150% of rated
current at a power factor of 75%.
Up to 5,000 connect and disconnect cycles at
full rated current and voltage.
Mechanical
Terminal Identification
Product Identification
Per CSA C22.2 No. 182.1 / UL1682.
Per CSA C22.2 No. 182.1 / UL1682.
Round portable service cords of diameters
commensurate with the device rating as defined
in UL standard 62, CSA C22.2 No. 49 and the
European Standards.
Terminals identified in accordance with North
American convention.
Ratings are a permanent part of the device housing.
Environmental
Flammability
Ingress Protection
Operating Temperatures
Min. Max.
Inches (mm)
Application Guide
Electrical
Impact Resistance
Cord Grip Cable Retention
Cord Accommodation
.75" - 1.25"
(19.1 - 31.8)
Configuration
Recep./ Plug/
Conn.
Inlet
Specifications
Endurance
Min. Max.
Inches (mm)
HB or better per UL 94 or CSA.
C22.2 No. 0.17.
IP22 Suitability
Maximum Continuous 75° C;
Minimum -40°C without impact.
Agriculture
Chemical Processing
Construction
Entertainment
Food Service
Light Manufacturing
Manufacturing
Military
Indoor location and maintenance.
Indoor location and maintenance.
Indoors for added safety and abuse
resistance.
Indoor location and maintenance.
Food service areas where aesthetics
and space are concerns.
Indoor locations and maintenance.
Light assembly areas, stamping
operations and maintenance areas.
Warehouse and maintenance areas.
Materials
Plug
Material
Case
Shroud
Pin Carrier 20 & 30A
Pin and Carrier 60A
Pins
Assembly Screws
Terminal Screws
Zytel® 101 Nylon
Zytel® 101 Nylon
Zytel® 101 Nylon
High-Impact Thermoset
Brass CDA#360
Stainless Steel (300 series)
Stainless Steel (300 series)
Receptacle
Body
Sleeve Carrier 20 & 30A
Sleeve Carrier 60A
Sleeves
Assembly Screws
Terminal Screws
Adapter Plate 20 & 30A
Adapter Plate 60A
Wall Trim Plate
Panel Mount Trim Plate
Zytel® 101 Nylon
Zytel® 101 Nylon
High-Impact Thermoset
Brass CDA #360
Stainless Steel (300 series)
Stainless Steel (300 series)
Galvanized Steel
Aluminum
Zytel® 101 Nylon
Stainless Steel (300 series)
Note: See page G-25 for product dimensions.
® Zytel and Rynite are registered trademarks of E.I. DuPont Corp.
G-24
®
Wiring Device-Kellems
www.hubbell-wiring.com
Pin and Sleeve
Low Profile Dimensions
Plug Dimensions
Type
A
B
L420P9
2.47"
(62.7)
3.78"
(96.0)
2.93"
(74.4)
C
1.49"
(37.8)
D
Cord Range Diameter
.350"-.710"
(8.9-18.0)
L430P12
2.97"
(75.4)
4.18"
(106.2)
3.50"
(88.9)
1.71"
(43.4)
.390"-.775"
(9.9-19.7)
A460P9
3.38"
(85.9)
4.25"
(108.0)
7.00"
(177.8)
–
.75"-1.25"
(19.1- 31.8)
A5100P9
4.92"
(125.00)
5.07"
(128.81)
8.60"
(218.35)
–
1.34"-1.50"
(34.0- 38.1)
Plugs
D
Angled Plugs
C
A
C
C
B
A
A
B
20 and 30A
B
60A
100A
Wall Mount Receptacle Dimensions
Type
A
B
C
D
E
F
L420R9
2.60"
(66.0)
2.81"
(71.4)
2.28"
(57.9)
2.38"
(60.5)
–
–
L430R12
3.12"
(79.2)
3.12"
(79.2)
2.77"
(70.4)
2.76"
(70.1)
–
–
A460R9
4.50"
(114.3)
4.50"
(114.3)
4.48"
(113.8)
–
3.62"
(91.9)
.50"
(12.7)
Wall Mount Receptacles
A
A
C
B
D
C
B
F
20 and 30A
E
60A
Adapter Plate (Included with “L” and “A” series receptacles)
4.75" Sq.
(120.7)
4.75" Sq.
(120.7)
Panel Cutout
2.55"
(64.8)
2.13"
(54.1)
4.75" Sq.
(120.7)
2.55"
(64.8)
2.13"
(54.1)
20A
Mounting
2-gang box
30A
Mounting
2-gang box
www.hubbell-wiring.com
20A
60A
Mounting
2-gang box
and 4¹¹⁄₁₆" box
2.62"
(66.5) dia.
2.83"
(71.9) dia.
30A
Dimensions in Inches (mm)
®
Wiring Device-Kellems
G-25
Pin and Sleeve Devices
IEC Pin and Sleeve Terminal Identification
IEC Pin and Sleeve Terminal Identification – Rear View
Terminal Marking Pattern*
Rating
Description
Domestic
Receptacle and Connector
International
Domestic
International
Plug and Inlet
Domestic
White
3 Wire
125V AC
277V AC
L+
100-130V
Green
3 Wire
4 Wire
250V AC
480V AC
600V AC
125/250V AC
1ØY 120/208V
Green
L+
200-250V
380-415V AC
Green
Green
White
White
N
N
L1
Pilot
L2
L2
L3
380-415V AC
L1
L1
Green
White
5 Wire
(3ØY)
120/208V AC
277/480V AC
347/600V AC
L2
L1
Green
Pilot
4 Wire
220/380V 50Hz
250/440V 60Hz
L3
200/346V to
240/415V
50 and 60Hz
Green
L+
Green
L2
—
L+
Green
(3Ø ∆)
250V AC
480V AC
600V AC
International
White
Green
Pilot
L2
N
L3
L1
Green
White
Pilot
L2
L3
L1
N
Green
Note: ⁄ *Location of grounding contact position will change as clock positions assigned to specific voltages change.
Pilot contacts supplied on 4 and 5 wire, 63 and 125 Amp international rated devices.
G-26
®
Wiring Device-Kellems
www.hubbell-wiring.com
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Devices
Hubbell Offers Two Approaches
Ground Path
To reduce the likelihood of electrical shock, the National Electrical Code requires that non-current carrying metallic
components be grounded. Insulgrip Pin and Sleeve wiring devices offer two styles of grounding.
Style I
HBL430PS1W
HBL430RS1W
Receptacles achieve grounding by
attaching the ground conductor
to the ground screw inside the
back box and utilizing the metallic
receptacle shell as a ground source
(see 3P 4W Style I illustration). Plugs
and connectors establish grounding
by means of connecting the flexible
cable ground conductor to a
ground terminal within each device,
which, in turn, is grounded through
the metallic plug or connector
shroud. Any exposed metallic
components are suitably grounded
in the Style I offering.
Style II
HBL430PS2W
HBL430RS2W
The Style II ground path offers two
means of achieving the proper
ground path. In addition to utilizing
the same grounding method as
in the Style I product, the Style II
version incorporates a separate
ground pin and sleeve (see 3P 4W
Style II illustration). This provides a
second ground path. The ground
pin on Style II devices is longer
than other pins, meaning that
they “make first" and “break last,"
assuring protection for people and
equipment.
New Pole and Wire Terminology
Style I
Style II
New
Old
No. of Contacts
New
Old
No. of Contacts
2P 3W
3P 4W
4P 5W
2W 2P
3W 3P
4W 4P
2
3
4
2P 3W
3P 4W
2W 3P
3W 4P
3
4
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-27
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Devices
Features and Benefits
Spring-Loaded, Gasketed Cover
Provides a UL Type 4X watertight,
dust-tight seal on connectors
and receptacles
Lid-Stay
Provides a hands-free means
of holding the cover in the open
position for engaging mating
device, troubleshooting or
maintenance purpose
Liquidtight Conduit Adapters
Machined aluminum adapters are
available to provide a means for
attaching flexible liquidtight metal
conduit to rear of Hubbell Pin and
Sleeve plug or connector
Watertight Neoprene
Sealing Glands
Provide a reliable seal at
the cable entry point
Pin Chamber
Confines arcing within the
interior chamber during
make and break cycle of
mating devices. Minimizes
arc tracking
Pin O-Ring Seal
Provides a watertight and
dust-tight seal around
the pins to ensure that
contamination will not
enter wire chamber
Powerful Mechanical Cord Grip
Hubbell’s design incorporates two
molded-in teeth to securely grip
the outer cable jacket, and internal
conductors to prevent slippage
and strain on terminations.
Captive barrel nuts ease assembly
and allow higher tightening torque
for maximum cord retention.
G-28
Watertight Cord Entrance
The tapered bore entrance
creates high compression
forces on sealing gland,
providing a watertight seal
around cord. Individual solid
neoprene glands are supplied
to match a full range of cord
sizes and assure watertight
performance.
®
Anti-Vibration Box Terminals
Interlocking box terminals
ensure that terminal screws
remain secure and cannot
loosen. The floating box is
designed to obtain high-torque
values without damaging
stranded conductors.
Wiring Device-Kellems
Terminal Entrance Holes
Large, square funneled
entrance holes isolate
each conductor to protect
against shorts due to
stray conductor strands.
Tapered hole provides a
fast and easy guide into
the termination chamber.
www.hubbell-wiring.com
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Devices
Features and Benefits
Locking Ring
Provides a UL Type 4X watertight
and dust-tight seal when the male
and female devices are connected
Product Marking
Catalog number and rating visible
while in use. Markings are color
coded differentiating Style I and
Style II devices
Sleeve O-Ring Seal
Provides a watertight and dusttight seal around the sleeves.
Assures that contamination
will not enter wire chamber
Terminal Screws
Combination phillips/slotted
head design
All-Brass Sleeve Contacts
Provide reliable electrical
contact with mating pins.
Ensures reliable electrical
contact with minimum heat
build-up over time
Thermoplastic Housing
Provides excellent insulating,
impact, corrosion, and
UV resistant properties.
Protects users and internal
components in the roughest
of environments.
www.hubbell-wiring.com
Shroud/Housing Seal
Provides a watertight
and dust-tight seal when
mated with receptacle or
connector
Shrouded Sleeves
The shroud protects contact
sleeves from deforming from
physical abuse. The design
protects the user from the
possibility of touching live
contacts during insertion and
withdrawal of mating parts.
Beryllium Copper SpringPin Design (Patented)
Maintains high unit pressure
on mating sleeves. Ensures
reliable electrical contact
while minimizing heat rise
due to normal pin wear
over time.
®
Thermoset Polyester
Contact Carrier
Molded thermoset polyester
provides high resistance to
electrical tracking. Withstands
higher temperatures which may
result from overload or arcing.
Thermoset properties provide
dimensional stability for this critical
assembly.
Wiring Device-Kellems
G-29
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Devices - Style I and II
TYPE 4X**
30, 60, 100 and 200 Ampere, 600/250 Voltage AC/DC, 50-400 Hertz
Rating
Amps
30
2P 3W
600/250
HBL330RS1W
HBL330PS1W
HBL330CS1W
IN330FS1
IN330MS1
3P 4W
600/250
HBL430RS1W
HBL430PS1W
HBL430CS1W
IN430FS1
IN430MS1
4P 5W
600/250
HBL530RS1W
HBL530PS1W
HBL530CS1W
IN530FS1
IN530MS1
2P 3W
600/250
HBL360RS1W
HBL360PS1W
HBL360CS1W
IN360FS1
IN360MS1
3P 4W
600/250
HBL460RS1W
HBL460PS1W
HBL460CS1W
IN460FS1
IN460MS1
4P 5W
600/250
HBL560RS1W
HBL560PS1W
HBL560CS1W
IN560FS1
IN560MS1
2P 3W
600/250
HBL3100RS1W
HBL3100PS1W
HBL3100CS1W
IN3100FS1
IN3100MS1
3P 4W
600/250
HBL4100RS1W
HBL4100PS1W
HBL4100CS1W
IN4100FS1
IN4100MS1
4P 5W
600/250
HBL5100RS1W
HBL5100PS1W
HBL5100CS1W
IN5100FS1
IN5100MS1
3P 4W
600/250
HBL4200RS1W
HBL4200PS1W
HBL4200CS1W
IN4200FS1†
IN4200MS1†
4P 5W
600/250
HBL5200RS1W
HBL5200PS1W
HBL5200CS1W
IN5200FS1†
IN5200MS1†
100
200
Maximum
Voltage
AC/DC
Replacement Interiors
Poles
and
Wires
60
Receptacle/
Connector
Configuration*
Style I Devices
Plug
Receptacle
Rating
Style II Devices
Plug
Replacement Interiors
Amps
30
2P 3W
600/250
HBL330RS2W
HBL330PS2W
HBL330CS2W
IN330FS2
IN330MS2
3P 4W
600/250
HBL430RS2W
HBL430PS2W
HBL430CS2W
IN430FS2
IN430MS2
2P 3W
600/250
HBL360RS2W
HBL360PS2W
HBL360CS2W
IN360FS2
IN360MS2
3P 4W
600/250
HBL460RS2W
HBL460PS2W
HBL460CS2W
IN460FS2
IN460MS2
2P 3W
600/250
HBL3100RS2W
HBL3100PS2W
HBL3100CS2W
IN3100FS2
IN3100MS2
3P 4W
600/250
HBL4100RS2W
HBL4100PS2W
HBL4100CS2W
IN4100FS2
IN4100MS2
2P 3W
600/250
HBL3200RS2W
HBL3200PS2W
HBL3200CS2W
IN3200FS2†
IN3200MS2†
3P 4W
600/250
HBL4200RS2W
HBL4200PS2W
HBL4200CS2W
IN4200FS2†
IN4200MS2 †
100
200
Maximum
Voltage
AC/DC
Connector &
Receptacle
Poles
and
Wires
60
Receptacle/
Connector
Configuration*
Connector
Receptacle
Rating
Amps
200
Poles
and
Wires
4P 5W
Receptacle/
Connector
Configuration*
Plug
Connector
Corrosion Resistant Devices
Maximum
Voltage
AC/DC
600/250
Receptacle
M5200RS1
Plug
M5200PS1
Connector &
Receptacle
Plug
Accessories
Connector
M5200CS1
Back Boxes
MB2003W
MB2004W
Angle Adapter
AA20045
Note: *CAUTION: To avoid electrical shock, review premises carefully and DO NOT use if Pin and Sleeve configuration (design) is already in a circuit having a rating differing
from the rating of this device.
**While in use or with cover closed.
†Consult factory.
Corrosion resistant cord sets are available on page Z-17 of this catalog.
G-30
®
Wiring Device-Kellems
www.hubbell-wiring.com
UL 1686 C1 Pin and Sleeve
“Reversed Service” Insulgrip® Pin and Sleeve Devices - Style I and II
TYPE 4X**
30, 60, 100 and 200 Ampere, 600/250 Voltage AC/DC, 50-400 Hertz
Rating
Amps
Poles
and
Wires
30
2P 3W
600/250
3P 4W
60
100
200
Receptacle/
Connector
Configuration*
Style I Devices
Maximum
Voltage
AC/DC
Receptacle
Connector
HBL330RS1WR
HBL330PS1WR
HBL330CS1WR
IN330MS1
IN330FS1
600/250
HBL430RS1WR
HBL430PS1WR
HBL430CS1WR
IN430MS1
IN430FS1
4P 5W
600/250
HBL530RS1WR
HBL530PS1WR
HBL530CS1WR
IN530MS1
IN530FS1
2P 3W
600/250
HBL360RS1WR
HBL360PS1WR
HBL360CS1WR
IN360MS1
IN360FS1
3P 4W
600/250
HBL460RS1WR
HBL460PS1WR
HBL460CS1WR
IN460MS1
IN460FS1
4P 5W
600/250
HBL560RS1WR
HBL560PS1WR
HBL560CS1WR
IN560MS1
IN560FS1
2P 3W
600/250
HBL3100RS1WR
HBL3100PS1WR
HBL3100CS1WR
IN3100MS1
IN3100FS1
3P 4W
600/250
HBL4100RS1WR
HBL4100PS1WR
HBL4100CS1WR
IN4100MS1
IN4100FS1
4P 5W
600/250
HBL5100RS1WR
HBL5100PS1WR
HBL5100CS1WR
IN5100MS1
IN5100FS1
3P 4W
600/250
HBL4200RS1WR
HBL4200PS1WR
HBL4200CS1WR
IN4200MS1†
IN4200FS1†
4P 5W
600/250
HBL5200RS1WR
HBL5200PS1WR
HBL5200CS1WR
IN5200MS1†
IN5200FS1†
Rating
30
2P 3W
600/250
3P 4W
200
Receptacle/
Connector
Configuration*
Style II Devices
Amps
100
Maximum
Voltage
AC/DC
Receptacle
200
Plug
Replacement Interiors
Connector &
Receptacle
Plug
Connector
HBL330RS2WR
HBL330PS2WR
HBL330CS2WR
IN330MS2
IN330FS2
600/250
HBL430RS2WR
HBL430PS2WR
HBL430CS2WR
IN430MS2
IN430FS2
2P 3W
600/250
HBL360RS2WR
HBL360PS2WR
HBL360CS2WR
IN360MS2
IN360FS2
3P 4W
600/250
HBL460RS2WR
HBL460PS2WR
HBL460CS2WR
IN460MS2
IN460FS2
2P 3W
600/250
HBL3100RS2WR
HBL3100PS2WR
HBL3100CS2WR
IN3100MS2
IN3100FS2
3P 4W
600/250
HBL4100RS2WR
HBL4100PS2WR
HBL4100CS2WR
IN4100MS2
IN4100FS2
2P 3W
600/250
HBL3200RS2WR
HBL3200PS2WR
HBL3200CS2WR
IN3200MS2†
IN3200FS2†
3P 4W
600/250
HBL4200RS2WR
HBL4200PS2WR
HBL4200CS2WR
IN4200MS2†
IN4200FS2 †
Rating
Amps
Connector &
Receptacle
Plug
Poles
and
Wires
60
Replacement Interiors
Poles
and
Wires
Receptacle/
Connector
Configuration*
4P 5W
Corrosion Resistant Devices
Maximum
Voltage
AC/DC
600/250
Receptacle
M5200BS1R
Plug
M5200CS1R
Plug
Accessories
Connector
—
Back Boxes
MB2003W
MB2004W
Angle Adapter
AA20045
Note: *CAUTION: To avoid electrical shock, review premises carefully and DO NOT use if Pin and Sleeve configuration (design) is already in a circuit having a rating differing
from the rating of this device.
**While in use or with cover closed.
†Consult factory.
Corrosion resistant cord sets are available on page Z-17 of this catalog.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-31
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Device Accessories
Insulgrip Pin and Sleeve Metallic Back Boxes
Hubbell manufactures an extensive line of back boxes for use with UL 1686 Pin and Sleeve
devices. Each back box is designed to give the user the maximum amount of wiring room
while achieving grounding to metallic conduit.
Metallic 30º Angle Back Box*
MB301W
Description
Amps
NPT Hub Size
Catalog Number
Back box for 30A devices.
30
30
¾"
1"
MB301W
MB302W
Metallic 15º Angle Back Box*
MB304W
Description
Amps
NPT Hub Size
Catalog Number
Back box for 60A devices.
60
60
60
1"
1¼"
1½"
MB601W
MB602W
MB603W
Metallic Feed-Thru Back Box*
Description
Amps
NPT Hub Size
Catalog Number
Straight feed-thru box for
30A devices.
Straight feed-thru box for
60A devices.
30
30
60
60
60
¾"
1"
1"
1¼"
1½"
MB303W
MB304W
MB604W
MB605W
MB606W
Metallic Four-Way Angle Back Box*
MB601003W
Description
Amps
NPT Hub Size
Catalog Number
Four-way 15° angle box for
60 and 100A devices.
60/100
60/100
60/100
200
200
200
1¼"
1½"
2"
2"
2½"
-
MB601002W
MB601003W
MB601004W
MB2003W
MB2004W
AA20045
Four-way 45° angle box for
200A devices.
45° Angle adapter only for
200A devices.
MB601006W
Metallic Four-Way Feed-Thru 15º Angle Back Box*
Description
Amps
NPT Hub Size
Catalog Number
Four-way feed-thru, 15° angle
for 60 and 100A devices.
60/100
60/100
60/100
1¼"
1½"
2"
MB601006W
MB601007W
MB601008W
Note: *These boxes are cast aluminum, suitable for IP54 requirements and are finished with enamel paint.
Replacement Cord Clamp and Locking Ring
MB2003W
Description
Used on
Cord Clamp
Catalog Number
Locking Ring
Catalog Number
Fits all 30A plugs and connectors.
Fits all 60A plugs and connectors.
All 3, 4, 5 wire
4 wire (Style 2) and all 5 wire
All 3 wire and 4 wire (Style 1)
4 wire (Style 2) and all 5 wire
All 3 wire and 4 wire (Style 1)
All 3, 4, 5 wire
CC3430
CC60
CC60
CC100
CC100
CC201
ILR1**
ILR2**
ILR3**
ILR4**
ILR5**
—
Rating of Hubbell
Pin and Sleeve Device
Liquidtight
Conduit Size
Hubbell
Liquidtight Adapter
Optional Kellems
Liquidtight Conduit Grip
30 Amp
½" NPT
¾" NPT
1" NPT
1" NPT
1¼" NPT
1¼" NPT
1½" NPT
SAB12
SAB34
SAB100
SAC100
SAC125
SAD125
SAD150
074093402
074093403
074093404
074093404
074093405
074093405
074093406
Fits all 100A plugs and connectors.
CC3430
Fits all 200A plugs and connectors.
Note: **Locking Ring only.
ILR1
SAB34
Liquidtight Adapters
60 Amp
100 Amp
074093403
G-32
®
Wiring Device-Kellems
www.hubbell-wiring.com
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Device Dimensions
Receptacle Dimensions
A
B
C
D
E
Amps
Type
Style I
Style II
Style I
Style II
Style I
Style II
Style I
Style II
Style I
Style II
30
330R
2.72" (69)
2.72" (69)
3.40" (86)
3.40" (86)
3.89" (99)
3.89" (99)
3.19" (81)
3.19" (81)
1.37" (35)
1.37" (35)
430R
2.72" (69)
2.72" (69)
3.40" (86)
3.40" (86)
3.89" (99)
3.89" (99)
3.19" (81)
3.19" (81)
1.37" (35)
1.37" (35)
530R
2.72" (69)
60
100
3.40" (86)
3.19" (81)
1.37" (35)
360R
3.50" (89)
3.50" (89)
4.25" (108)
4.25" (108)
4.66" (118)
4.66" (118)
4.42" (112)
4.42" (112)
1.54" (39)
1.54" (39)
460R
3.50" (89)
3.50" (89)
4.25" (108)
4.25" (108)
4.66" (118)
4.66" (118)
4.42" (112)
4.42" (112)
1.54" (39)
1.54" (39)
560R
3.50" (89)
4.25" (108)
4.66" (118)
4.42" (112)
1.54" (39)
3100R 3.50" (89)
3.50" (89)
4.25" (108)
4.25" (108)
4.66" (118)
4.70" (119)
5.30" (135)
5.30" (135)
1.54" (39)
1.54" (39)
4100R 3.50" (89)
3.50" (89)
4.25" (108)
4.25" (108)
4.66" (118)
4.70" (119)
5.30" (135)
5.30" (135)
1.54" (39)
1.54" (39)
5100R 3.50" (89)
200
3.89" (99)
4.25" (108)
3200R
6.50" (165)
4200R 6.50" (165)
6.90" (170)
5200R 6.90" (170)
4.66" (118)
7.00" (177)
7.00" (177)
7.39" (187)
7.39" (187)
D
A
5.30" (135)
5.63" (143)
5.63" (143)
5.63" (143)
5.63" (143)
7.76" (197)
7.76" (197)
.99" (25)
7.76" (197)
.99" (25)
7.76" (197)
A
E
1.54" (39)
.99" (25)
.99" (25)
D
E
C
B
C
B
30, 60 and 100 Amp
200 Amp
Plug Dimensions
Connector Body Dimensions
A
Amps
30
B
Style II
Style I
330P 7.53" (191)
7.53" (191)
3.00" (76) 3.00" (76) .375-1.20" (9.5-30.5)
430P 7.53" (191)
7.53" (191)
530P 7.53" (191)
60
Style II
A
Type Style I
Cord Grip Range
B
Type Style I
Style II
Style I
330C 8.38" (213)
8.38" (213)
3.74" (95) 3.74" (95) .375-1.20" (9.5-30.5)
3.00" (76) 3.00" (76) .375-1.20" (9.5-30.5)
430C 8.38" (213)
8.38" (213)
3.74" (95) 3.74" (95) .375-1.20" (9.5-30.5)
3.00" (76)
530C 8.38" (213)
9.40" (239)
3.40" (86) 3.40" (86) .500-1.45" (12.7-36.8)
460P 9.40" (239)
9.40" (239)
3.40" (86) 3.70" (94) .500-1.45" (12.7-36.8)
3.70" (94)
30
.375-1.20" (9.5-30.5)
360P 9.40" (239)
560P 9.40" (239)
Amps
.500-1.45" (12.7-36.8)
100 3100P 10.70" (272) 10.70" (272) 3.70" (94) 3.70" (94) .925-1.94" (27.0-49.3)
60
3.74" (95)
Style II
Cord Grip Range
.375-1.20" (9.5-30.5)
360C 9.90" (251)
9.90" (251)
460C 9.90" (251)
10.10" (256) 3.50" (89) 3.80" (96) .500-1.45" (12.7-36.8)
560C 10.10" (256)
3.50" (89) 3.50" (89) .500-1.45" (12.7-36.8)
3.80" (96)
.500-1.45" (12.7-36.8)
100 3100C 11.70" (297) 11.70" (297) 4.50" (114)4.50" (114).925-1.94" (27.0-49.3)
4100P 10.70" (272) 10.90" (277) 3.70" (94) 4.00" (102) .925-1.94" (27.0-49.3)
4100C 11.70" (297) 11.90" (302) 4.50" (114)4.70" (119) .925-1.94" (27.0-49.3)
5100P 10.90" (277)
5100C 11.90" (302)
200 3200P
4.00" (102)
11.13" (282)
.925-1.94" (27.0-49.3)
6.35" (161) 1.00-2.50" (25.4-63.5)
200 3200C
4.70" (119)
13.65" (346)
.925-1.94" (27.0-49.3)
7.00 (177) 1.00-2.50" (25.4-63.5)
4200P 11.13" (282) 11.13" (282) 6.35" (161) 6.70" (170) 1.00-2.50" (25.4-63.5)
4200C 13.65" (346) 13.65" (346) 7.00" (177)7.39 (187) 1.00-2.50" (25.4-63.5)
5200P 11.13" (282)
5200C 13.65" (346)
6.70" (170)
1.00-2.50" (25.4-63.5)
A
B
7.39" (187)
1.00-2.50" (25.4-63.5)
A
B
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-33
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Device Dimensions
Metallic Angle Back Box
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
30° Angle back
box for 30A
devices.
¾"
4.87"
(124.0)
2.94"
(75.0)
4.02"
(102.0)
3.40"
(86.0)
4.25"
(108.0)
2.12"
(54.0)
MB301W
1"
4.87"
(124.0)
2.94"
(75.0)
4.02"
(102.0)
3.40"
(86.0)
4.25"
(108.0)
2.12"
(54.0)
MB302W
15° Angle back
box for 60A
devices.
1"
–
4.80"
(121.9)
–
–
5.25"
(133.4)
2.69"
(68.3)
MB601W
1¼"
–
4.80"
(121.9)
–
–
5.25"
(133.4)
2.69"
(68.3)
MB602W
1½"
–
4.80"
(121.9)
–
–
5.25"
(133.4)
2.69"
(68.3)
MB603W
Description
E
A
C
F
B
NPT
Hub
Size
D
Metallic Angle Box
Catalog Number
Metallic Feed-Thru Back Box
E
Description
Back box for
30A devices.
A
C
B
D
Back box for
60A devices.
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
¾"
5.35"
(136.0)
2.91"
(74.0)
4.53"
(115.0)
3.59"
(91.0)
2.62"
(67.0)
–
MB303W
1"
5.35"
(136.0)
2.91"
(74.0)
4.53"
(115.0)
3.59"
(91.0)
2.62"
(67.0)
–
MB304W
1"
6.50"
(165.1)
3.80"
(97.0)
5.75"
(146.1)
4.50"
(114.3)
3.50"
(88.9)
–
MB604W
1¼"
6.50"
(165.1)
3.80"
(97.0)
5.75"
(146.1)
4.50"
(114.3)
3.50"
(88.9)
–
MB605W
1½"
6.50"
(165.1)
3.80"
(97.0)
5.75"
(146.1)
4.50"
(114.3)
3.50"
(88.9)
–
MB606W
Metallic Feed-Thru Box
Catalog Number
Metallic Four-Way Angle Back Box
E
15° Angle fourway box for
60 and 100A
devices.
C
A
B
Description
D
Metallic Four-Way Angle Box
45° Angle fourway box for
200A devices.
45° Angle adapter
only for 200A devices.
E
C
15°
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Catalog Number
1¼"
7.92"
(201.0)
8.52"
(216.0)
7.00"
(178.0)
6.14"
(156.0)
4.88"
(124.0)
–
MB601002W
1½"
7.92"
(201.0)
8.52"
(216.0)
7.00"
(178.0)
6.14"
(156.0)
4.88"
(124.0)
–
MB601003W
2"
7.92"
(201.0)
8.52"
(216.0)
7.00"
(178.0)
6.14"
(156.0)
4.88"
(124.0)
–
MB601004W
2"
10.82"
(274.8)
9.86"
(250.4)
9.50"
(241.3)
8.17"
(207.5)
6.75"
(171.5)
–
MB2003W
2½"
10.82"
(274.8)
9.86"
(250.4)
9.50"
(241.3)
8.17"
(207.5)
6.75"
(171.5)
–
MB2004W
–
8.00"
(203.2)
6.00"
(152.4)
7.00"
(178.0)
8.00"
(203.2)
7.00"
(178.0)
–
AA20045
Metallic Four-Way Feed-Thru 15º Angle Back Box
Description
A
NPT
Hub
Size
Four-way
Feed-thru box
for 60 and 100A
devices.
B
D
Metallic Feed-Thru Angle Box
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Catalog Number
1¼"
7.98"
(202.7)
8.55"
(217.2)
7.00"
(178.0)
6.14"
(156.0)
4.88"
(124.0)
–
MB601006W
1½"
7.98"
(202.7)
8.55"
(217.2)
7.00"
(178.0)
6.14"
(156.0)
4.88"
(124.0)
–
MB601007W
2"
7.98"
(202.7)
8.55"
(217.2)
7.00"
(178.0)
6.14"
(156.0)
4.88"
(124.0)
–
MB601008W
Note: These boxes are cast aluminum, suitable for IP54 requirements and are finished with enamel paint.
Dimensions in Inches (mm)
G-34
®
Wiring Device-Kellems
www.hubbell-wiring.com
UL 1686 C1 Pin and Sleeve
Technical Information
Insulgrip® Pin and Sleeve Device Listings
Materials (30, 60, 100, and 200 Amp)
Typical Specification
Plug
Manufacturer’s ID
Description
Electrical Type
Max. Rating
Configuration
Certification
Material
Valox® 357 (200A Aluminum)
Aluminum
Rynite® SST35 (200A Aluminum)
Nickel Plated Brass
Rynite® SST35
Neoprene
Neoprene
Thermoset Polyester
Thermoset Polyester
Brass (M-Series - Nickel-plated
tellurium copper)
Box Terminal
Heat Treated & Zinc Plated Steel
Screws (Terminal, Assembly & Set) Stainless Steel (300 Series)
Ground Standoff
Brass
Ground Bracket
Nickel Plated Spring Bronze
Locking Ring
Epoxy Painted Aluminum
Housing
Plug Shroud
Cord Clamps
Clamp Nut
Gland Cap
Gland
O-Rings, Gaskets & Seals
Contact Carrier
Retainer
Sleeves
Connector Body
Hubbell HBL430PS2W
Plug, Power Supply
3 Pole + Earth
30 Amp, 600V AC, 250V DC, 50-400Hz
UL 1686, Watertight, C1 Configuration
UL Listed, UL Standard 1682, UL 50, and
UL 1010 (plugs only), CSA Certified to CSA
Spec. C22.2 No. 182.1, No. 94 and No. 159
(plugs only), UL Listed and CSA Certified Type 4X
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 3,000V AC.
600V AC RMS (i.e., minimum creepage and
clearance distance of 6.4 millimeters, per UL 1682).
Certified for current interrupting at full rated
current.
Max. 30°C temperature rise at full rated current
after 50 cycles of overload at 150% of rated current.
Up to 1,000 connect and disconnect cycles at
full rated current and voltage.
Valox® 357 (200 Amp Aluminum)
Epoxy Painted Aluminum
Rynite® SST35
Nickel Plated Brass
Rynite® SST35 (200A Aluminum)
Neoprene
Neoprene
Thermoset Polyester
Thermoset Polyester
Brass (M-Series - Nickel-plated
tellurium copper)
Pin Spring
Beryllium Copper
Box Terminal
Heat Treated & Zinc Plated Steel
Screws (Terminal, Assembly & Set) Stainless Steel (300 Series)
Ground Standoff
Brass
Ground Bracket
Nickel Plated Spring Bronze
Cover
Epoxy Painted Aluminum
Cover Arm
Epoxy Painted Aluminum
Spring Guide
Stainless Steel (300 Series)
Springs (Arm & Wave)
Stainless Steel (300 Series)
Spring Washer
Stainless Steel (300 Series)
Hinge Bushing
Aluminum
Rivet
Aluminum
Hose Down & Moisture Type 3, 4, 4X per UL 50E and CSA 22.2, No. 94.
Resistance
Flammability (Enclosure) UL 94V-0 and CSA C22.2 No. 0.17.
Operating Temperatures Maximum Continuous 75°C; Minimum
-40°C without impact -25° with impact.
Hazardous Location
Class I, Division I & II, Groups B, C & D and
(30, 60 & 100A)
Class II, Division I & II, Groups F & G per
(plug only)
UL 1010 & CSA 22.2, No. 159.
Receptacle
Materials
Housing
Connector Shroud
Cord Clamps
Clamp Nut
Gland Cap
Gland
O-Rings, Gaskets & Seals
Contact Carrier
Retainer
Pin
Housing/Flange
O-Rings, Gaskets & Seals
Contact Carrier
Retainer
Pin
Epoxy Painted Aluminum
Neoprene
Thermoset Polyester
Thermoset Polyester
Brass (M-Series - Nickel-plated
tellurium copper)
Pin Spring
Beryllium Copper
Box Terminal
Heat Treated & Zinc Plated Steel
Screws (Terminal, Assembly & Set) Stainless Steel (300 Series)
Ground Standoff
Brass
Ground Bracket
Steel
Cover
Epoxy Painted Aluminum
Cover Arm
Epoxy Painted Aluminum
Spring Guide
Stainless Steel (300 Series)
Springs (Arm & Wave)
Stainless Steel (300 Series)
Spring Washer
Stainless Steel (300 Series)
Hinge Bushing
Aluminum
Rivet
Aluminum
Endurance
Mechanical
Impact Resistance
Cord Grip Cable
Retention
Cord Accommodation
Terminal Identification
Product Identification
Per CSA C22.2, No. 182.1, UL 1682.
Per CSA C22.2, No. 182.1, UL 1682.
Round portable service cords of diameters
commensurate with the device rating as defined
in UL. Standard 62, CSA C22.2 No. 49 and the
harmonized European Standards.
Terminals identified in accordance with UL 1686
(1, 2, 3, Green).
Identification and ratings are permanently
fastened to the device housing.
Environmental
Housings
All Other Materials
Valox® 357 (200A Aluminum).
Resistant to corrosion and chemical attack.
Watertight Application Guide
Industry
Watertight.
Agriculture
Chemical Processing
Construction
Entertainment
Food Processing
Food Service
Light Manufacturing
Manufacturing
Military
Outdoor for fans, heaters, pumps, etc.
Where subject to water, corrosion.
Outdoors subject to severe weather conditions.
Outdoors subject to severe weather.
Where subject to water, corrosion.
Areas subject to wash downs & heavy cleaning.
Subjected to cleaning, solvents & chemicals.
Where subject to water, corrosion.
Outdoor construction or maintenance.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Rynite® is a registered trademark of E.I. DuPont Corp.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-35
Pin and Sleeve
Insulgrip® Mechanical Interlocks
Features and Benefits
Non-metallic enclosure meets UL 50E Type 4X
(watertight), 12 (dust-tight) and IP66 suitability
requirements. Enclosure is molded of rugged
thermoplastic Valox® to resist abuse, corrosion
and enhance safety. All external hardware is
stainless steel
Three “molded in” conduit drill points
are located on the top, bottom, and
back surface of enclosure. Conduit
hub provided: 30A 1 inch NPT,
60A 1¼ inch NPT
Adjustable mounting feet (4)
can be mounted in any 1 of
3 positions for ease
of installation
The patented Plug-Check™
mechanism detects the
presence of the plug.
It operates as a clutch to
engage the handle with the
switch and captures the
plug. This action prevents
the plug from being removed
until the switch is turned OFF
High visibility red handle can
be locked in the OFF
position as a method of
compliance with OSHA
lockout requirements.
Accepts up to a ⁵⁄₁₆ inch
padlock shackle
Removable door
for ease of wiring
and installation
Spring-loaded receptacle liftcover with gasket
ensures dust tight rating; liftcover provides
watertight seal when turned and locked
Compact Fused Disconnect
Switch accepts Class “J” fuses.
Fuse holders are top mounted for
easy access. The switch accepts
auxiliary contacts for control circuit
applications including the ON/OFF
control of remote pilot lights or
signal for programmable controllers.
HBL430MIFS2W
Thermoset polyester contact
carrier provides resistance
to electrical tracking and
withstands higher temperatures.
Thermoset properties provide
excellent dimensional stability,
low moisture absorption, and
superior dielectric strength.
Conduit hub and mounting feet are supplied
with each Insulgrip® Mechanical Interlock
Stainless steel ¼ turn
door fasteners for
quick, easy access
to fuses.
Enclosure door can
be locked to prevent
unauthorized access.
Additionally, if the switch
is ON, the door cannot
be opened.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
G-36
®
Wiring Device-Kellems
www.hubbell-wiring.com
Pin and Sleeve
Insulgrip® Mechanical Interlocks - Style II, Fused and Unfused
30 and 60 Ampere, 600/250 Voltage AC/DC, 50-400 Hertz
Type 4X**
Style II - Fused
Insulgrip® Mechanical Interlocks
Rating
Amps
Poles
and
Wires
30
3P 4W
600/250
HBL430MIFS2W
HBL430PS2W
60
3P 4W
600/250
HBL460MIFS2W
HBL460PS2W
Receptacle/
Connector
Configuration*
Maximum
Voltage
AC/DC
Mechanical Interlock
Mating Plug
Style II - Unfused
Insulgrip® Mechanical Interlocks
Rating
Gray Style Switch
Amps
Poles
and
Wires
30
3P 4W
600/250
HBL430MIS2W
HBL430PS2W
60
3P 4W
600/250
HBL460MIS2W
HBL460PS2W
Receptacle/
Connector
Configuration*
Maximum
Voltage
AC/DC
Mechanical Interlock
Mating Plug
HBLACFSNO
HBL30MIFRS
Black Style Switch
Note: 30A – 1 inch NPT hub supplied; 60A – 1¼ inch hub supplied.
*CAUTION: To avoid electrical shock, review premises carefully and DO NOT use if Pin and Sleeve configuration (design)
is already in a circuit having a rating differing from the rating of this device.
**While in use or with cover closed.
Replacement Auxiliary Contacts
Description
Black Style Switch
Gray Style Switch
Auxiliary contact, normally open, A600 pilot duty, break before break.
ACFSNO
HBLACFSNO
Auxiliary contact, normally closed, A600 pilot duty, break before break.
ACFSNC
HBLACFSNC
Note: Auxiliary contacts are specific to the style switch noted and are NOT interchangeble.
ACFSNO
30MIFRS
Replacement Switches
Description
Black Style Switch
Gray Style Switch
For 30A fused switches.
30MIFRS
HBL30MIFRS
—
HBL60MIFRS
30MISRS
HBL30MISRS
—
HBL60MISRS
For 60A fused switches. Gray Style switch will retro fit Black Style switch.
For 30A unfused switches.
For 60A unfused switches. Gray Style switch will retro fit Black Style switch.
Note: If replacing a Black Style switch, you must use the 30MIFRS. All other applications can use the Gray Style switch.
MICPK30
Watertight Closure Plug Kits
Description
Catalog Number
For 30A Circuit-Lock® unfused and fused Pin and Sleeve mechanical interlocks.
MICPK30
For 60 and 100A Circuit-Lock® unfused and fused Pin and Sleeve mechanical interlocks.
MICPK60
Replacement Mounting Feet
Description
Catalog Number
Replacement mounting feet and screws for 30 and 60A fused mechanical interlocks.
HBLRFT2 ∆
Note: ∆ Package of 10 feet and 10 screws.
www.hubbell-wiring.com
HBLRFT2
®
Wiring Device-Kellems
G-37
Pin and Sleeve
Technical Information
Specifications, HP Ratings and Dimensions
Typical Specifications
Manufacturer’s Identification
Description
Electrical Type
Rating
Configuration
Enclosure Type (UL 50E)
Ingress Protection
Certification
Performance
Hubbell HBL460MIFS2W
Fused Insulgrip® Pin and Sleeve
Mechanical Interlock
3 Pole + Earth
60A, 250VDC/600VAC
Per UL 1686 C1
Outdoor - 4X (Watertight, Washdown)
Indoor - 12 (Dust Tight, Falling Dirt)
IP66 Suitability
UL Listed for US and Canada
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Withstands 3,000VAC Min.
250VDC/600VAC.
Certified for current interrupting at full rated
current and voltage.
Suitable for use on a circuit capable of
delivering not more than 200,000 RMS
symmetrical amperes at the voltage rating
of receptacle.
Mechanical 10,000 cycles minimum.
Short Circuit
Withstand Rating
Operations
Note: This device provides fused switched control of a plug connected load and
includes an interlocking feature to prevent the plug from being disconnected
or the door from opening while the receptacle is energized. The switch
cannot be turned on until the plug is fully inserted.
Mechanical
Impact Resistance
Terminal Identification
In accordance with UL 746C.
In accordance with UL, CSA and
international conventions.
Ratings are part of the external label and
molded into the receptacle housing.
External adjustable feet.
Product Ratings
Materials
Mounting
Part
Material
Environmental
Base, Door and Handle
Conduit Hub
Enclosure Gasket
and Shaft Seal
Shaft and Mounting Inserts
Ground Plate
Enclosure Screws
and Hinge Spring
Hinge Pin
Contact Carrier
Valox®
Zinc, 30A – 1 in., 60A – 1¼ in. NPT
Neoprene
Moisture Resistance
Ingress Protection
Flammability
Operating Temperatures
Brass
Galvanized Steel
Stainless Steel
UV Resistance
Nickel-Plated Brass
Thermoset Polyester
Fuse Types
Outdoor - 4X (Watertight, Washdown);
Indoor - 12 (Dust-tight, Falling dirt).
IP66 Suitability.
UL94-5VA and V-0 Classification.
Max. Continuous +60°C;
Min. Continuous -40°C w/o impact.
All exposed insulating materials are
UV stabilized.
UL Listed Class “J”.
CSA Certified HRCI-J.
Horsepower Ratings
30A Horsepower Ratings
60A Horsepower Ratings
3 Phase A.C.
Standard
Maximum*
3 Phase A.C.
Standard
Maximum*
200-240V
480V
600V
3
5
7.5
7.5
15
20
200-240V
480V
600V
7.5
15
15
15
30
50
Note: *Requires time delay fuses.
Dimensions
7.27"
(184.7)
10.18"
(258.6)
9.31"
(236.5)
7.19"
(182.6)
1.51" (38.4) 30A
1.68" (42.7) 60A
3.60"
(91.4)
11.46"
(291.6)
12.37"
(314.2)
15.03"
(381.8)
14.48"
(367.8)
15.36"
(390.1)
4.00" (101.6) 30A
5.00" (127.0) 60A
8.43"
(214.1)
Note: 30A – 1 inch NPT hub supplied; 60A – 1¼ inch hub supplied.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Dimensions in Inches (mm)
G-38
®
Wiring Device-Kellems
www.hubbell-wiring.com
Control Products
Wiring Devices for Hazardous Locations
Features and Benefits
Hazardous Location Non-Fused UL1686 Mechanical Interlocks and Plugs
Hubbell’s hazardous location line of non-fused mechanically interlocked
disconnect switches are typically used for applications with the presence of
flammable gasses or vapors, ignitable dusts and fibers. They are also suitable for
use in outdoor or indoor damp, wet and dirty locations or in areas where frequent
wash downs, heavy rain, or water spray routinely occurs. These switches are
compact in size to reduce cost and make it easier to position on the wall or piece
of equipment. The enclosures are made of copper-free aluminum and have a
polyester/epoxy finish to prevent corrosion. The high visibility handles can be
locked out to comply with OSHA lock out/tag out regulations.
Copper-free aluminum construction
with electrostatically applied polyester/
epoxy finish to prevent corrosion
Large visible rotary handle with
“On-Off” indicator allows a quick
means of disconnecting power
VSQ Hazardous Location Ratings
Class I, Div. 1 & 2, Groups B,C,D
Class I, Zones I & 2, Groups IIB+H2, IIA
Class II, Div. 1 & 2, Groups F & G
Class lll
NEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)
Lockable handle to meet
OSHA Lockout/Tagout
regulations
Compact NEMA 4X
enclosure and footfrint
allows easy installation
in tight locations
HBLVP3485
HBLVSQ3034
Features
•
•
•
•
•
•
•
•
Product is UL1686 and is fully interchangeable with other UL1686 configured and listed devices.
NEMA 4X with receptacle lid turned shut or with plug locking ring tightened.
Handle mechanism is chemical resistant Valox® (TM Sabic) thermoplastic.
Plug and switch are interlocked. Switch cannot be turned “ON” without fully inserted plug.
Plug cannot be removed with switch in “ON” position.
Plug held in place when switch is “Off” for convenience. Pull operated release mechanism.
Auxiliary Contact (late-make early-break) contact rated 10 Amp, 1/3 HP at 125/250VAC.
Can be used for operating pilot lights or starter coils.
Feed-through construction.
Internal switch horsepower rated as “suitable as a motor disconnect”.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
G-39
Control Products
Wiring Devices for Hazardous Locations
30 and 60 Ampere
30 and 60 Amp Non-Fused UL1686 Mechanical Interlocks and Plugs
Amp
Circuit
Mechanical Interlock
Plug
30 Amp
600V AC
2W 3P
HBLVSQ3023
HBLVP3385
3W 4P
HBLVSQ3034
HBLVP3485
60 AMP
600V AC
2W 3P
HBLVSQ6023
HBLVP6385
3W 4P
HBLVSQ6034
HBLVP6485
Note: HBLVSQ 30 Amp models come standard with 1" drilled and tapped conduit openings top and bottom plus two 1" x ¾"
reducers and one ¾" close-up plug for maximum flexibility. 60 amp models come with one 1½" opening on top and bottom
and one 1½" close-up plug.
HBLVSQ3034
Horsepower Ratings (VAC)*
Amp
Circuit
120
1Ø
3Ø
30 Amp
60 Amp
HBLVP3485
240
480
600
2
5
10
15
3
7.5
15
20
1Ø
–
10
15
20
3Ø
–
10
25
30
Note: *Internal switch only.
Dimensions
A
B
C
D
E
F
30A
Mechanical Interlocks
5.75 (146)
10.50 (267)
9.75 (248)
3.75 (95)
3.13 (79)
8.13 (206)
60A
8.13 (206)
14.16 (360)
11.28 (287)
4.03 (102)
2.50 (64)
11.38 (289)
D
E
A
C
E
D
B F
Plugs
A
B
C
30A Both
6.69 (170)
3.00 (76)
1.88 (48)
5.38 (137)
2.53 (64)
60A, 3 Pole
8.81 (224)
3.38 (86)
2.25 (57)
6.50 (165)
3.00 (76)
60A, 4 Pole
8.81 (224)
3.69 (94)
2.53 (64)
6.50 (165)
3.00 (76)
A
B
E
C
Wire Range
Reg. Stranded
Extra Flex
Grip Range
D
Dimensions in Inches (mm)
G-40
®
Wiring Device-Kellems
30A
#10 – #6
#10 – #8
.55–1.2 (14–30)
60A
#6 – #4
#6 – #4
.65–1.5 (16–38)
www.hubbell-wiring.com
Section H
Single Pole Devices and Temporary Power
Index
Single Pole Devices
Page
Single Pole
Plugs and Receptacles
Series 15 - 150 Ampere, 600V AC/250V DC
Plugs, Receptacles, Protective Caps and Snap Back Covers . . . . . . . . . .H-3
Tees, Gender Reversing, Replacement Bodies and Accessories . . . . . . .H-4
Series 16 - 300 and 400 Ampere, 600V AC/250V DC
Plugs, Receptacles, Protective Caps, Snap Back Covers and
Weather Protective Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-6
Tees, 3-Fers, Gender Reversing Devices, Distribution Block,
Replacement Bodies and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-7
Temporary Power
Spider®
Single Pole Accessories
Page
II Temporary Power Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .H-10
Cable Sets and Receptacles, Replacement Parts. . . . . . . . . . . . . . . . . . . .H-11
Temporary Power Distribution Boxes and Power Cables. . . . . . . . . . . . . .H-12
Heavy-Duty Portable Outlet Boxes, Plates and Specifications . . . . . . . .H-13
Pre-Wired Portable Outlet Boxes, Worklights and Accessories . . . . . . .H-14
Spider® II and
60A Class “L” Spider® II
Heavy-Duty Outlet Boxes
and Cover Plates
www.hubbell-wiring.com
®
Wiring Device-Kellems
H-1
Single Pole Devices
Series 15 and 16 - 150, 300 and 400 Ampere, 600V AC/250V DC
Features and Benefits
Hubbell Wiring Device–Kellems offers a full line of
innovative, high quality, Series 15 and Series 16
single pole plugs, receptacles and accessories.
Single pole devices are the right choice for
supplying temporary electrical power distribution for
entertainment, theme parks, carnival equipment,
concerts, movie making, and numerous other
applications requiring temporary power.
Single pole devices have been designed with ease
of assembly and disassembly in mind, no special
tools are required. A high strength non-conductive
retaining screw is all that is needed to securely lock
the contacts to the insulated sleeve.
Male Plug
Non-Conductive Retaining Screw locks contacts in place
and allows for easy installation. Prevents contact movement
within housing. Special screw thread requires fewer turns
than most competitors and reduces the risk of a conductive
screw being substituted
Insulgrip® Style Housing for Superior Gripping
conforms to the user’s hand making it easy to
connect and disconnect, even with gloves on
Large Raised Alignment Arrow
aids in the mating of devices and
provides a visual indication that the
devices are properly connected
Rounded Corners
reduce the possibility of
catching or snagging on
structures or equipment
UL Enclosure Types 3R, 4X and 12 Rating
suitable for use in almost any environment
Double Cam Design provides high contact
pressure and vibration resistant connection,
which helps reduce operating temperatures
and extends life
Female Plug
High Conductivity Brass Contact
provides improved performance
by helping to reduce operating
temperatures and extends life
Turn and Lock Symbol aids in the
mating of devices and provides a
clear indication that the devices are
properly connected
Extra Long non-conductive inner sleeve
reduces force required to install housing
over contacts. Easier to rotate contact
in body for installing retaining screw
H-2
Easily Identifiable Cable with cut off points for
secure fit allows you to easily customize the
housing to the required cable size. Makes
cutting to the correct cable size very easy.
Accommodates wide range of cables
Strip Gauge molded into every plug and
receptacle housing. Simplifies installation
and saves time
®
Wiring Device-Kellems
www.hubbell-wiring.com
Single Pole Devices
Series 15 - 150 Ampere, 600V AC/250V DC
Plugs, Receptacles, Protective Caps and Weather Protective Covers
Enclosure Types
3R, 4X, 12
Plugs, Male
Plugs, Female
Description
Color
Male Plug
Description
150 amp,
thermoplastic elastomer,
cable size #8 - #2 AWG.
Black
White
Green
Red
Blue
HBL15MBK
HBL15MW
HBL15MGN
HBL15MR
HBL15MBL
150 amp,
Black
thermoplastic elastomer, White
cable size #8 - #2 AWG. Green
Red
Blue
Color
Female Plug
HBL15FBK
HBL15FW
HBL15FGN
HBL15FR
HBL15FBL
Receptacles,
Double Set Screw
Receptacles,
Stud Type 11/16" x ¾"
Description
Color
Female
Receptacles
Male
Receptacles
150 amp Panel Mount,
thermoplastic, cable
size #8 - #2 AWG.
Black
White
Green
Red
Blue
HBL15FRSBK
HBL15FRSW
HBL15FRSGN
HBL15FRSR
HBL15FRSBL
HBL15MRSBK
HBL15MRSW
HBL15MRSGN
HBL15MRSR
HBL15MRSBL
Description
Color
Fits Male
Devices
Fits Female
Devices
Fits 150 amp plugs
and receptacles.
Black
White
Green
Red
Blue
HBL15MCAPBK
HBL15MCAPW
HBL15MCAPGN
HBL15MCAPR
HBL15MCAPBL
HBL15FCAPBK
HBL15FCAPW
HBL15FCAPGN
HBL15FCAPR
HBL15FCAPBL
Description
150 amp Panel Mount,
thermoplastic, cable
size #8 - #2 AWG.
Protective Caps
Female
Receptacles
Male
Receptacles
HBL15FRBK
HBL15FRW
HBL15FRGN
HBL15FRR
HBL15FRBL
HBL15MRBK
HBL15MRW
HBL15MRGN
HBL15MRR
HBL15MRBL
Weather Protective Covers
www.hubbell-wiring.com
®
Description
Color
Catalog Number
Use with stud type
or double set screw
receptacles.
Black
White
Green
Red
Blue
HBL15NCBK
HBL15NCW
HBL15NCGN
HBL15NCR
HBL15NCBL
Wiring Device-Kellems
H-3
Single Pole Devices
Series 15 - 150 Ampere, 600V AC/250V DC
Tees, Gender Reversing Devices, Replacement Bodies and Accessories
Enclosure Types
3R, 4X, 12
Gender
Reversing
Devices
Tees
Color
Tapping Tee
Paralleling Tee
(Female-Female-Male) (Female-Male-Male)
Color
Double Male
(Male-Male)
Double Female
(Female-Female)
Black
White
Green
Red
Blue
HBL15TBK
HBL15TW
HBL15TGN
HBL15TR
HBL15TBL
Black
White
Green
Red
Blue
HBL15DMBK*
HBL15DMW
HBL15DMGN
HBL15DMR*
HBL15DMBL*
HBL15DFBK*
HBL15DFW
HBL15DFGN
HBL15DFR*
HBL15DFBL*
HBL15PTBK
HBL15PTW
HBL15PTGN
HBL15PTR
HBL15PTBL
Note: *Not UL listed, consult factory for availability.
Replacement
Bodies
(25 Pack)
Replacement
Contacts
(25 Pack)
Color
Male Body
Female Body
Description
Male Pin
Female Sleeve
Black
White
Green
Red
Blue
HBL15MBBK
HBL15MBW
HBL15MBGN
HBL15MBR
HBL15MBBL
HBL15FBBK
HBL15FBW
HBL15FBGN
HBL15FBR
HBL15FBBL
Contact,
150 amp
HBL15RCM
HBL15RCF
Accessories
Description
Catalog Number
Accessory Kit, retaining screw, copper foil,
terminal screws and brass wire.
HBL15PK
Replacement retaining screw (100 pack).
HBL15RS
Copper foil (100 pack).
HBL15CF
Brass wire (100 pack).
HBL15BW
Terminal screw - inline (100 pack).
HBL15TS25
Terminal screw - panel mount (100 pack).
HBL15TS375
Ferrule #2 AWG (100 pack).
HBL15F2
Ferrule #4 AWG (100 pack).
HBL15F4
H-4
®
HBL15PK
HBL15RS
HBL15CF
HBL15BW
HBL15TS25
HBL15TS375
HBL15F2
HBL15F4
Wiring Device-Kellems
www.hubbell-wiring.com
Single Pole Devices
Series 15 - 150 Ampere, 600V AC/250V DC
Specifications and Dimensions
Specifications
Certification / Environmental
Electrical
Voltage Ratings
UL and cUL Listed.
UL Enclosure Types 3R, 4X, 12.
UL 1691 standard for single pole locking-type separable connectors.
National Electric Code (NEC), ANSI/NFPA 70.
600V AC Maximum.
250V DC Maximum.
150A Maximum.
Amperage Rating
Mechanical
Terminal Accommodation
Plug: #8 to #2 AWG.
Recept.: #8 to #2 AWG.
Ratings are a permanent part of device.
Plug: Thermoplastic Elastomer (TPE).
Recept.: Polybutylene Terephthalate (PBT).
Brass.
Nylon.
Product Identification
Base Compound
Contact Material
Retaining Screw Material
Conductor Ampacity Chart (Type SC/PPC Wire)
Cable Size
Ampacity•
#8
#6
#4
#2
80
105
140
190
Note: •90°C column NEC Table 400.5(A)(2).
Dimensions
Panel Mount Receptacles
Series 15 Threaded Stud
Threaded Stud
A
B
C
D
E
F
Mounting Hole Termination
Male
1.86"
(47.2)
1.37"
(34.8)
2.82"
(71.6)
.86"
(22.0)
.80"
(20.4)
1.20"
(30.5)
Through
3x Ø .20"
5/16-18
Threaded Stud
Female
1.86"
(47.2)
1.37"
(34.8)
2.88"
(73.1)
.86"
(22.0)
.80"
(20.4)
1.26"
(32.0)
Through
3x Ø .20"
5/16-18
Threaded Stud
Double Set Screw A
B
C
D
E
F
Mounting Hole Termination
Male
1.37"
(34.8)
2.90"
(73.6)
.86"
(22.0)
.88"
(22.2)
1.20"
(30.5)
Through
3x Ø .20"
A
B
(2) 5/32 Socket
Head Set Screws
Male
Series 15 Double Set Screw
A
B
C
F
E
Female
1.86"
(47.2)
1.37"
(34.8)
2.95"
(74.9)
.86"
(22.0)
.87"
(22.2)
1.26"
(32.0)
Through
3x Ø .20"
(2) 5/32 Socket
Head Set Screws
D
Mounting Holes
In Line Plugs
Series 15 Male In Line Plug
A
B
C
D
Male
4.54" 1.04"
(115-.3) (26.4)
.86"
(21.8)
3.22"
(81.7)
Female
4.60" 1.11"
(116.8) (28.2)
.68"
(17.3)
3.28"
(83.2)
Double Male
Double Female
B
—
4.22" 1.05"
(107.3) (26.7)
.68"
(17.3)
Series 15 Female In Line Plug
B
C
D
Series 15 Double Male
C
4.22" .86"
(107.3) (21.8)
Male
A
Gender Reversing Devices
A
F
D
Mounting Holes
1.86"
(47.2)
C
E
Series 15 Double Female
A
B
A
B
B
C
Series 15 Tapping Tee
Series 15 Paralleling Tee
Tees
A
B
C
Tapping Tee
2.67"
(67.9)
4.28"
(45.9)
.865"
(21.9)
Paralleling Tee
2.67"
(67.9)
4.22" .865"
(107.2) (21.9)
A
A
Weatherproof Cover
A
Series 15
B
2.03" 1.14"
( 51.5) (29.0)
B
Series 15 Weatherproof Cover
C
1.49"
(37.9)
C
C
B
A
B
B
B
B
C
C
A
Dimensions in Inches (mm)
www.hubbell-wiring.com
C
C
®
Wiring Device-Kellems
H-5
Single Pole Devices
Series 16 - 300 and 400 Ampere, 600V AC/250V DC
Plugs, Receptacles, Protective Caps, Snap Back Covers and Weather Protective Covers
Plugs
Description
Color
Male Plug
Female Plug
Description
Color
Male Plug
Female Plug
300 amp,
thermoplastic
elastomer,
cable size
#6 - 2/0 AWG.
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBL300MBK
HBL300MW
HBL300MGN
HBL300MR
HBL300MBL
HBL300MBN
HBL300MO
HBL300MY
HBL300FBK
HBL300FW
HBL300FGN
HBL300FR
HBL300FBL
HBL300FBN
HBL300FO
HBL300FY
400 amp,
thermoplastic
elastomer,
cable size
2/0 - 4/0 AWG.
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBL400MBK
HBL400MW
HBL400MGN
HBL400MR
HBL400MBL
HBL400MBN
HBL400MO
HBL400MY
HBL400FBK
HBL400FW
HBL400FGN
HBL400FR
HBL400FBL
HBL400FBN
HBL400FO
HBL400FY
Receptacles, Female
Stud Type
Receptacles, Male
Stud Type
Description
Color
Through Hole
Mounting
Threaded
Mounting Holes
400 amp
Panel Mount,
thermoplastic
elastomer,
mates with 300
and 400 amp
plugs.
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBLFRSBK
HBLFRSW
HBLFRSGN
HBLFRSR
HBLFRSBL
HBLFRSBN
HBLFRSO
HBLFRSY
HBLFRSCBK
HBLFRSCW
HBLFRSCGN
HBLFRSCR
HBLFRSCBL
HBLFRSCBN
HBLFRSCO
HBLFRSCY
Receptacles,
Double Set Screw
Description
Color
Through Hole
Mounting
Threaded
Mounting Holes
400 amp
Panel Mount,
thermoplastic
elastomer,
mates with 300
and 400 amp
plugs.
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBLMRSBK
HBLMRSW
HBLMRSGN
HBLMRSR
HBLMRSBL
HBLMRSBN
HBLMRSO
HBLMRSY
HBLMRSCBK
HBLMRSCW
HBLMRSCGN
HBLMRSCR
HBLMRSCBL
HBLMRSCBN
HBLMRSCO
HBLMRSCY
Description
Color
Female
Receptacles
Male
Receptacles
400 amp Mount,
thermoplastic
elastomer,
mates with 300
and 400 amp
plugs.
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBLFRBBK
HBLFRBW
HBLFRBGN
HBLFRBR
HBLFRBBL
HBLFRBBN
HBLFRBO
HBLFRBY
HBLMRBBK
HBLMRBW
HBLMRBGN
HBLMRBR
HBLMRBBL
HBLMRBBN
HBLMRBO
HBLMRBY
Receptacles,
Bus Bar Mount
Description
Color
Female
Receptacles
Male
Receptacles
400 amp
Panel Mount,
thermoplastic
elastomer, cable
size #4 - 4/0 AWG,
mates with 300
and 400 amp
plugs.
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBLFRBK
HBLFRW
HBLFRGN
HBLFRR
HBLFRBL
HBLFRBN
HBLFRO
HBLFRY
HBLMRBK
HBLMRW
HBLMRGN
HBLMRR
HBLMRBL
HBLMRBN
HBLMRO
HBLMRY
Protective
Caps
Weather
Protective
Covers
Snap Back Covers
Color
Fits Male
Devices
Fits Female
Devices
Color
Through Hole
Mounting
Threaded
Mounting Holes
Color
Catalog Number
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBLMCAPBK
HBLMCAPW
HBLMCAPGN
HBLMCAPR
HBLMCAPBL
HBLMCAPBN
HBLMCAPO
HBLMCAPY
HBLFCAPBK
HBLFCAPW
HBLFCAPGN
HBLFCAPR
HBLFCAPBL
HBLFCAPBN
HBLFCAPO
HBLFCAPY
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBLSCBK*
HBLSCW*
HBLSCGN*
HBLSCR*
HBLSCBL*
HBLSCBN*
HBLSCO*
HBLSCY*
HBLSCCBK*
HBLSCCW*
HBLSCCGN*
HBLSCCR*
HBLSCCBL*
HBLSCCBN*
HBLSCCO*
HBLSCCY*
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBLNCBK
HBLNCW
HBLNCGN
HBLNCR
HBLNCBL
HBLNCBN
HBLNCO
HBLNCY
Note: *3R only.
H-6
®
Wiring Device-Kellems
www.hubbell-wiring.com
Single Pole Devices
Series 16 - 300 and 400 Ampere, 600V AC/250V DC
Tees, 3-Fers, Gender Reversing Devices, Distribution Block, Replacement Bodies and Accessories
Enclosure Types
3R, 4X, 12
Tees and 3-Fers
Color
Tapping Tee
(Female-Female-Male)
Paralleling Tee
(Female-Male-Male)
3-Fer (Male-FemaleFemale-Female)
3-Fer (Female-MaleMale-Male)
Soft 3-Fer (Male-FemaleFemale-Female)
Soft 3-Fer (FemaleMale-Male-Male)
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBLTBK
HBLTW
HBLTGN
HBLTR
HBLTBL
HBLTBN
HBLTO
HBLTY
HBLPTBK
HBLPTW
HBLPTGN
HBLPTR
HBLPTBL
HBLPTBN
HBLPTO
HBLPTY
HBLM3FBK
HBLM3FW
HBLM3FGN
HBLM3FR
HBLM3FBL
HBLM3FBN
HBLM3FO
HBLM3FY
HBLF3MBK
HBLF3MW
HBLF3MGN
HBLF3MR
HBLF3MBL
HBLF3MBN
HBLF3MO
HBLF3MY
HBLM3FSBK
—
—
—
—
—
—
—
—
—
HBLF3MSGN
—
—
—
—
—
Gender
Reversing
Devices
Distribution Block
(1-Male, 6-Females)
Color
Double Male
(Male-Male)
Double Female
(Female-Female)
Color
Catalog Number
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBLDMBK
HBLDMW
HBLDMGN
HBLDMR
HBLDMBL
HBLDMBN
HBLDMO
HBLDMY
HBLDFBK
HBLDFW
HBLDFGN
HBLDFR
HBLDFBL
HBLDFBN
HBLDFO
HBLDFY
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBL7DBBK
HBL7DBW
HBL7DBGN
HBL7DBR
HBL7DBBL
HBL7DBBN
HBL7DBO
HBL7DBY
Replacement
Bodies
(100 Pack)
Replacement
Contacts (20 Pack)
Color
Male Body
Female Body
Description
Male Pin
Female Sleeve
Black
White
Green
Red
Blue
Brown
Orange
Yellow
HBLMBBK
HBLMBW
HBLMBGN
HBLMBR
HBLMBBL
HBLMBBN
HBLMBO
HBLMBY
HBLFBBK
HBLFBW
HBLFBGN
HBLFBR
HBLFBBL
HBLFBBN
HBLFBO
HBLFBY
Contact, 300 amp
HBL300RCM
HBL300RCF
Contact, 400 amp
HBL400RCM
HBL400RCF
Accessories
Description
Catalog Number
Accessory Kit, retaining screw,
copper foil, terminal screws and
brass wire
HBLPK
Replacement retaining screw
(500 pack)
HBLRS
Copper foil (500 pack)
HBLCF
Brass wire (500 pack)
HBLBW
Terminal screw - panel mount (500
pack)
HBLTS
Terminal screw - inline (500 pack)
HBLTSR
www.hubbell-wiring.com
HBLPK
®
Wiring Device-Kellems
H-7
Single Pole Devices
Series 16 - 300 and 400 Ampere, 600V AC/250V DC
Specifications and Dimensions
Specifications
Electrical
Certification / Environmental
Voltage Ratings
UL and cUL Listed.
UL Enclosure Types 3R, 4X, 12.
Flammability: HB per UL94 or CSA 22.2. 0.17.
UL 498 for attachment plugs and receptacles.
UL 1691 draft standard for single pin and sleeve devices intended for
theatre, stage and studio applications (Series 16 pending).
National Electric Code (NEC), ANSI/NFPA 70.
600V AC Maximum.
250V DC Maximum.
400A Maximum.
Amperage Rating
Mechanical
Terminal Accommodation
Plug– 300A – #6 to 2/0 AWG.
Plug– 400A – 2/0 to 4/0 AWG.
Recept.– 400A – #4 to 4/0 AWG.
Ratings are a permanent part of device.
Thermoplastic Elastomer (TPE).
Brass.
Nylon.
Product Identification
Base Compound
Contact Material
Retaining Screw Material
Conductor Ampacity Chart (Type SC/PPC Wire)
Cable Size
Ampacity•
#4
#2
2/0
4/0
140
190
300
405
Note: •90°C column NEC Table 400.5(A)(2).
Dimensions
Panel Mount Receptacles
Series 16 Threaded Stud
Threaded Stud
A
B
C
D
Male & Female
w/ through
hole mounting
2.20"
(55.9)
2.20"
(55.9)
1.50"
(38.1)
Male & Female
w/ threaded
mounting holes
2.20"
(55.9)
2.20"
(55.9)
1.50"
(38.1)
E
G
Mounting Hole Termination
4.10" 1.48"
(104.3) (47.4)
1.25"
(31.7)
1.74"
(44.2)
Through
4x Ø .20"
1/2-13
UNC-2A
Threaded Stud
3.67"
(93.2)
1.11"
(28.2)
1.55"
(39.4)
Threaded
4x #10-32
1/2-13
UNC-2A
Threaded Stud
1.48"
(47.4)
Double Set Screw A
B
C
D
Male & Female
w/ threaded
mounting holes
2.20"
(55.9)
2.20"
(55.9)
1.50"
(38.1)
4.10" 1.48"
(104.3) (47.4)
Busbar Type
A
B
C
D
E
F
G
Mounting Hole Termination
Male & Female
w/ threaded
mounting holes
2.20"
(55.9)
2.20"
(55.9)
1.50"
(38.1)
3.57"
(90.7)
1.48"
(37.6)
1.01"
(25.7)
1.55"
(39.4)
Threaded
4x #10-32
E
F
G
Mounting Hole Termination
1.36
(34.5)
1.74"
(44.2)
Threaded
4x #10-32
G
F
AC
E
Mounting Holes
Series 16 Double Set Scew
B
A
(2) 7/32 Socket
Head Set Screws
D
F
G
E
C
Mounting Holes
Series 16 Busbar Type
B
(1) 5/16-18
UNC-2B
Threaded Hole
A
Female
B
C
D
7.01" 1.38"
(178.0) (35.1)
1.48"
(37.6)
4.78"
(121.4)
7.10" 1.44"
(180.5) (36.6)
1.06"
(27.0)
4.90"
(121.3)
A
B
C
4.65"
(118.1)
4.84"
(122.9)
1.48"
(37.6)
1.44"
(36.6)
—
Series 16 Inline Plug Male
Double Female
E
A
B
C
D
D
Series 16 Double Male
Series 16 Double Female
B
1.06"
(27.0)
A
B
Tapping Tee
3.18"
(80.8)
4.74" 1.48"
(120.4) (37.6)
Paralleling Tee
3.18"
(80.8)
4.65" 1.48"
(118.1) (37.6)
3-Fer
5.88" 5.78" 1.48"
(149.3) (146.9) (37.6)
B
C
A
A
C
Series 16 Tapping Tee
B
Series 16 Paralleling Tee
A
A
B
B
C
2.37"
(60.2)
Series 16 Snap Back Cover
C
A
—
C
A
B
2.20" 1.16" 2.03"
(55.88) (29.44) (51.5)
Snap Back Cover
2.26"
to be used with receptacles (57.4)
C
C
Series 16 Weatherproof Cover
B
Series 16 3-FER
C
A
Covers
A
B
C
Tees and 3-Fers
Weatherproof Cover
G
Series 16 Inline Plug Female
A
Gender Reversing Devices
Double Male
D
Mounting Holes
A
Male
F
C
In Line Plugs
H-8
D
B
F
B
B
A
HUBBELL
Dimensions in Inches (mm)
®
Wiring Device-Kellems
www.hubbell-wiring.com
Temporary Power
Spider® II Temporary Power Boxes
Features and Benefits
Individual
GFCI modules
Gasketed latching
receptacle lift covers
Available with flush 50 Amp
Twist-Lock® inlet or 60 Amp
IEC reversed service Pin and
Sleeve receptacle
Replaceable legs
Six 20 Amp straight blade
or Twist-Lock® watertight
receptacles
Standard stab termination circuit
breakers with gasketed lift cover
• Compact electronic supervisory circuit.
• Detailed wiring diagram.
• TYPE 3R metallic enclosure and heavy duty,
abuse resistant legs.
SBSB1A
Hubbell’s Spider® II temporary power
distribution system sets the safety and
performance standard for temporary
power needs. Construction sites and
outdoor events place more demands
on electrical power than ever before.
Hubbell’s Spider box steps up to
the challenge by offering advanced
electrical and safety features.
The Spider II box incorporates the
most advanced ground fault module
technology available in the industry
today, ensuring safe and reliable
distribution of electrical power for
a wide variety of temporary power
applications.
Breadth of Line and Innovation
Hubbell manufactures a variety of
Spider II Boxes and temporary
power products for both indoor
and outdoor power and lighting
applications. Hubbell’s Spider
products incorporate the most
www.hubbell-wiring.com
innovative wiring devices in the
Hubbell Safety Shroud Twist–Lock®
system. The shrouded Twist-Lock
design extends the life of the plug by
protecting the blades from abuse and,
more importantly, the shroud protects
the user from arcing. The Spider II
temporary power system incorporates
Watertight Safety Shroud Twist-Lock
receptacles to provide a UL Type 4X
rating when the receptacles are used
with Watertight Safety Shroud TwistLock plugs. Standard Twist-Lock
and Safety Shroud Twist-Lock plugs
may be used with these receptacles
when water ingress during use is not a
concern. To ensure an overall 3R rating
when all receptacles are in use, Hubbell
has also designed a weatherproof
boot. This weatherproof boot for
straight blade plugs maintains a 3R
rating when it is used with the Spider II
straight blade receptacles.
®
Environmental Protection
All Pin and Sleeve, Twist-Lock and
straight blade receptacles on each
Spider box are protected when not in
use by a gasketed, spring loaded flip
lid. Hubbell has taken multiple steps
to ensure that the Spider II boxes can
withstand today’s harsh environmental
requirements and as a result, the
Spider II boxes have earned a 3R
enclosure rating for outdoor rainproof
applications. In addition to the added
safety and water resistant features,
Hubbell makes the boxes user friendly
by offering a full line of replacement
parts for field repairability.
Certifications
Hubbell’s Spider II Boxes meet NEC
requirements for personal protection
against electrical shock on job sites
and are listed to the latest UL 1640
standard for Portable Power
Distribution Equipment.
Wiring Device-Kellems
H-9
Temporary Power
Spider® II Temporary Power Boxes
Ordering Information
50A Spider ® II
Spider® II Boxes
60A Spider ® II
Receptacle Ratings
Receptacle
Components
7
1
1
20A, 125V
30A, 120/240V
30A, 120/240V
Straight Blade
Twist-Lock® (inlet)
Twist-Lock® (outlet)
7
1
1
50A, 120/240V AC
(Maximum)
Straight Blade
Twist-Lock®
Twist-Lock® (inlet)
Twist-Lock® (outlet)
50A, 120/240V AC
(Maximum)
Rating
Type
30A, 120/240V AC
(Maximum)
Straight Blade
Twist-Lock® (inlet)
Twist-Lock® (outlet)
50A, 120/240V AC
(Maximum)
Qty
60A Class “L” Spider ® II
Protection
Overload
GFI
Catalog Number
HBL53R61
HBL2715SWR
HBL2710
Yes
No
No
Yes
No
No
SDSB1A
20A, 125V
50A, 125/250V
50A, 125/250V
HBL53R61
HBL6375S
CS6369
Yes
No
No
Yes
No
No
SBSB1A
6
1
1
1
20A, 125V
30A, 250V
50A, 125/250V
50A, 125/250V
HBL53R61
HBL2620SW
HBL6375S
CS6369
Yes
Yes
No
No
Yes
Yes
No
No
SBSB2
Twist-Lock®
Twist-Lock® (inlet)
Twist-Lock® (outlet)
7
1
1
20A, 125V
50A, 125/250V
50A, 125/250V
HBL2310SW
HBL6375S
CS6369
Yes
No
No
Yes
No
No
SBTL1A
50A, 120/240V AC
(Maximum)
Twist-Lock®
Twist-Lock®
Twist-Lock® (inlet)
Twist-Lock® (outlet)
6
1
1
1
20A, 125V
30A, 250V
50A, 125/250V
50A, 125/250V
HBL2310SW
HBL2620SW
HBL6375S
CS6369
Yes
Yes
No
No
Yes
Yes
No
No
SBTL2
60A, 3Ø 120/208V AC
(Maximum)
Straight Blade
Pin and Sleeve (inlet)
Pin and Sleeve (outlet)
6
1
1
20A, 125V
60A, 3ØY 120/208V
60A, 3ØY 120/208V
HBL53R61
HBL560B9R
HBL560R9W
Yes
No
No
Yes
No
No
SCSB0*
60A, 3Ø 120/208V AC
(Maximum)
Twist-Lock®
Pin and Sleeve (inlet)
Pin and Sleeve (outlet)
6
1
1
20A, 125V
60A, 3ØY 120/208V
60A, 3ØY 120/208V
HBL2310SW
HBL560B9R
HBL560R9W
Yes
No
No
Yes
No
No
SCTL0*
Receptacle Ratings
Receptacle
Components
Overload
GFI
Class “L” Spider® II Boxes
Qty
Protection
Rating
Type
60A, 3Ø 120/208V AC
(Maximum)
Straight Blade
Class “L” (inlet)
Class “L” (outlet)
6
1
1
20A, 125V
60A, 3ØY, 120/208V
60A, 3ØY, 120/208V
HBL53R61
—
—
Yes
No
No
Yes**
No
No
Catalog Number
SCSB0M2
60A, 3Ø 120/208V AC
(Maximum)
Twist-Lock®
Class “L” (inlet)
Class “L” (outlet)
6
1
1
20A, 125V
60A, 3ØY, 120/208V
60A, 3ØY, 120/208V
HBL2310SW
—
—
Yes
No
No
Yes**
No
No
SCTL0M2
Note: *60A units are UL and cUL only.
**GFCI protection on 4 devices only.
Specifications
Spider® II
Listing/Certification
Environment
Enclosure Type
Code Compliance
Dimensions
UL 1640 cUL and CSA, UL 943.
Indoor and outdoor wet and dry locations.
3R, rainproof, suitable for use in damp locations.
NEC®, ANSI/NFPA 70.
13.70"
(348.0)
6.13"
(155.7)
22.84"
(580.1)
18.90"
(480.1)
Dimensions in Inches (mm)
H-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
Temporary Power
Cable Sets and Receptacles, Replacement Parts
Cable Sets and Receptacles
Description
Catalog Number
50A pre-wired wall mounted receptacle, with 2 ft. wire leads.
50A cord set - 50 ft. cable (input/output).
50A cord set - 100 ft. cable (input/output).
60A cord set - 6 ft. cable (input/output).
60A cord set - 50 ft. cable (input/output).
60A, 3Ø 120/208V Pin and Sleeve wall mounted receptacle.
1¼" hub 15 deg. non-metallic angle back box for 60A receptacle.
1½" hub 15 deg. metallic 4-way angle back box for 60A receptacle.
SR50
SCB50
SCB100
SCC06
SCC50
HBL560R9W
BB601W
FW60100
SR50
Note: Consult factory for alternate cable lengths.
Replacement Parts
SCB50
Description
Catalog Number
20A, 125V straight blade receptacle.
20A, 125V Safety-Shroud Twist-Lock® receptacle.
30A, 250V Safety-Shroud Twist-Lock® receptacle.
30A, Reverse Service Safety-Shroud connector.
30A, Reverse Service inlet.
50A, 125/250V Twist-Lock® receptacle.
50A, 125/250V Twist-Lock® inlet.
60A, 3Ø 120/208V Pin and Sleeve reversed service receptacle (inlet).
60A, 3Ø 120/208V Pin and Sleeve receptacle (outlet).
60A, 3Ø 120/208V Pin and Sleeve reversed service plug (female).
60A, 3Ø 120/208V Pin and Sleeve plug (male).
GFCI module.
50A Spider supervisory kit.
60A Spider supervisory kit.
Spider circuit breaker cover.
Spider leg kit.
Spider leg kit, green.
50A receptacle cover plate.
HBL53R61
HBL2310SW
HBL2620SW
HBL2713SR
HBL2715SWR
CS6369
HBL6375S
HBL560B9R
HBL560R9W
HBL560P9WR
HBL560P9W
GFM20
SSK
SSK60
SCBC
SLK
SLKG
HBL77CM74WO
SCBC
HBL2310SW
HBL2713SR
GFM20
HBL77CM74WO
SSK
www.hubbell-wiring.com
®
Wiring Device-Kellems
H-11
Temporary Power
Temporary Power Distribution Boxes and Power Cables
Ordering Information
Durable Hi Visibility Yellow
Powder Coated Steel Construction
Individual GFCI modules
NEMA 3R Enclosure
Save space in the warehouse
and on the truck with nesting
leg design
Hubbell 50 Amp Twist-Lock®
receptacle and inlet
TPDL – Twist-Lock®
TPDS – Straight Blade
Six 20 Amp straight blade
or Twist-Lock® covered
receptacles
TPC50 – 50' Cable
TPC100 – 100' Cable
Temporary Power Distribution Boxes
Rating
Type
Qty
50A, 120/240V AC
(Maximum)
Twist-Lock®
Twist-Lock®
Twist-Lock® (Inlet)
Twist-Lock® (Outlet)
6
1
1
1
50A, 120/240V AC
(Maximum)
Straight Blade
Twist-Lock®
Twist-Lock® (Inlet)
Twist-Lock® (Outlet)
6
1
1
1
Protection
Receptacle
Rating
Overload
GFI
Catalog Number
20A, 125V
30A, 250V
50A, 125/250V
50A, 125/250V
Yes
Yes
No
No
Yes
No
No
No
TPDL
20A, 125V
30A, 250V
50A, 125/250V
50A, 125/250V
Yes
Yes
No
No
Yes
No
No
No
TPDS
Temporary Power Cables
Weatherproof
Boot
Rating
CableType
Length Male Device
Female Device
50A, 125/250V
6/3, 8/1
50 ft. CS6365L
CS6364L
No
Catalog Number
TPC50
50A, 125/250V
6/3, 8/1
100 ft. CS6365L
CS6364L
No
TPC100
Specifications
Boxes
Listings/Certifications
Operation
Enclosure Type
Code Compliance
Cables
UL 1640, UL 943
Indoor and outdoor wet and dry locations
3R, rainproof, suitable for use in damp locations
NEC, ANSI/NFPA 70
Listings/Certifications
Operation
Connectors: UL/CSA; Cable: MSHA
Indoor and outdoor wet and dry locations
Dimensions
21.50"
(546.1)
14.50"
(368.3)
INLET
OUTLET
12.52"
(317.9)
Dimensions in Inches (mm)
H-12
10.23"
(259.8)
®
Wiring Device-Kellems
www.hubbell-wiring.com
Temporary Power
Heavy-Duty Portable Outlet Boxes and Plates
Heavy-Duty Portable Outlet Boxes and Cover Plates
Description
Catalog Number
Box with cord strain relief, with one blank cover plate.
Box with cord strain relief, with one blank cover plate, black.
Box with cord strain relief, with two duplex (indoor) cover plates.
Box with cord strain relief, with two duplex (indoor), yellow cover plates.
Blank, non-metallic FS cover plate with foam gasket, gray.
Duplex, non-metallic FS cover plate, gray.
Duplex, non-metallic FS cover plate, yellow.
Single receptacle (1.39"), non-metallic FS cover plate, gray.
Single receptacle (1.56"), non-metallic FS cover plate, gray.
Rectangular opening, non-metallic FS cover plate, gray.
HBLPOB1
HBLPOB1BK
HBLPOB1D
HBLPOB1DY
HBLP14FS
HBLP8FS
HBLP8FSY
HBLP7FS
HBLP720FS
HBLP26FS
HBLPOB1
Other Cover Plates and Devices
which may be used with Heavy-Duty Portable Outlet Boxes
Description
Catalog Number
Duplex cover plate, weatherproof.
Single receptacle (1.39") cover plate, weatherproof.
Single receptacle (1.56") cover plate, weatherproof.
Safety-Shroud Twist-Lock® surface receptacles.
HBL5221, HBL52CM21
HBL7423WO, HBL74CM23WO
HBL7425WOA, HBL74CM25WOA
HBL2310SR, HBL2320SR, HBL2330SR,
HBL2610SR, HBL2620SR
Note: Standard product gray, CM yellow.
Deluxe Cord Grips Straight Male Thread
Nylon Fittings, Stainless Steel Mesh, Liquidtight, for Insulated Cables
Cover Plates
Grip Diameter Range
Inches
(cm)
Thread Size
NPT (inches)
Form
Size
Catalog Number
.375"-.500" (.95-1.27)
.500"-.625" (1.27-1.59)
.625"-.750" (1.59-1.90)
¾"
¾"
¾"
F3
F3
F3
074011335
074011336
074011337
Nylon Cord Connector Straight Male Thread
Grip Diameter Range
Inches
(cm)
Thread Size
NPT (inches)
Form
Size
Catalog Number
.375"-.500" (.95-1.27)
.500"-.625" (1.27-1.59)
.625"-.750" (1.59-1.90)
¾"
¾"
¾"
F3
F3
F3
SHC1035CR
SHC1036CR
SHC1037CR
Specifications for Heavy-Duty Portable Outlet Boxes and Cover Plates
UL Listed
CSA Certified
UL 514C, UL467 and UL50 Enclosures Types 1, 3R.
C22.2 No. 18 and C22.2 No. 94 Enclosures Types 1, 3R and
C22.2 No. 0.4 (Impedance).
Box Specifications:
Moisture Resistance
Flammability
Operating Temperature
UV Resistance
Impact and Crush Resistance
Material
Cord Connector Materials
Cord Diameter Range
Bonding Strap Material
Threaded Inserts
Grounding Screw Material
Indoor Cover Plate Screws Material
Outdoor Cover Plate Screws Material
Cover Plate Gasket Material
Wet and damp locations, Enclosure Type 3R when used with weatherproof
cover plates. Dry, indoors locations, Enclosure Type 1 with all other cover plates.
UL 94V-0, 94-5VA classification.
80°C maximum; -35°C minimum.
All materials are UV stabilized.
in accordance with UL 514C, UL50, C22.2 No. 18 and C22.2 No. 94.
Valox®.
Nylon nut; Nylon Gotcha® ring; Neoprene grommet.
.38" to .75" diameter.
Brass.
Brass.
Brass.
Zinc Plated Steel.
Stainless Steel.
UL recognized closed-cell foam (aging and oil resistant).
Deluxe Cord Grips
(purchased separately)
Gray Nylon
Cord Connector
Dimensions
3.18"
(80.8)
4.82"
(122.4)
4.20"
(106.7)
2.84"
(72.1)
4.56"
(115.8)
5.38" (136.7)
HBLPOB1
Dimensions in Inches (mm)
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
H-13
Temporary Power
Pre-Wired Portable Outlet Boxes, Worklights and Accessories
Pre-Wired Portable Outlet Boxes
SPB1
Description
Catalog Number
25 ft. with 2-15A, 125V, straight blade single receptacles and 1- 15A, 125V
straight blade plug and boot.
SPB1
25 ft. with 2-20A, 125V, Twist-Lock® single receptacles and 1-20A, 125V
Twist-Lock plug and boot.
SPB2
Worklights and Accessories
SPB2
Description
Catalog Number
Temporary worklight with 15A, 125V straight blade plug, 25 ft. cord.
TW25F1
Temporary worklight with 20A, 125V Twist-Lock® plug, 25 ft. cord.
TW25F2
Temporary low voltage worklight with cigarette lighter plug, 20 ft. cord.
TWLV20F
Portable battery pack and charger for TWLV20F worklight.
TWBP
Non-metallic temporary worklight hook.
TWH
Specifications
Temporary Worklights
TW25F1
Listing/Certification
Environment
Fluorescent Lamp
UL298 and cUL Portable Electric Hand Lamps.
Dry, indoor locations.
13 watt twin tube only.
Battery Pack and Charger
Environment
Fluorescent Lamp Life
Charge Time
Battery Rating
TW25F2
Indoor and outdoor dry locations.
Fully charged-5 hour approx.
Fully charged-16 hours approx.
12 volt.
Light Fixture
Worklight Hook
TWLV20F
TWBP
Battery Pack and Charger
TWH
Dimensions in Inches (mm)
H-14
®
Wiring Device-Kellems
www.hubbell-wiring.com
Section I
Industrial Connectivity and Control Products
Index
Product
Page
®
LINKOSITY Power Components
Power Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-2
Control Integration Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-3
Power System Distribution Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-4
MotorQuick® Disconnect Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-7
Mini-Quick® Control Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-8
2-6 Pole Plugs and Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-9
7-12 Pole Plugs and Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-13
Field Attachable Connectors - Screw Terminal Style . . . . . . . . . . . . . . . . . I-17
Micro-Quick® Control Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-18
Single Key 3-5 Pole Plugs and Receptacles . . . . . . . . . . . . . . . . . . . . . . . . I-19
Dual Key 2-6 Pole Plugs and Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . I-23
Field Attachable Connectors - Screw Terminal Style . . . . . . . . . . . . . . . . . I-27
Field Attachable Connectors - IDC Style . . . . . . . . . . . . . . . . . . . . . . . . . . I-28
Nano-Quick® Control Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-29
3-4 Pole Plugs and Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-30
Field Attachable Connectors - IDC Style . . . . . . . . . . . . . . . . . . . . . . . . . . I-32
Signal-Quick® Sensor Mounting Accessories
Cushioned Sensor Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-33
Flat and Right Angle Adjustable and Fixed Brackets . . . . . . . . . . . . . . . . . I-34
End Caps and Block Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-35
Universal Aiming Brackets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-36
CableTrak® Hose and Cable Carrier System . . . . . . . . . . . . . . . . . . . . . . . . I-37
CableTrak® Kit with and without Brackets . . . . . . . . . . . . . . . . . . . . . . . . . I-38
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-39
Mounting Options and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-40
DIN Rail Utility Box
Power and Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-41
PANEL-SAFE® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-42
Power and Data Access Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I-43
HI-Impact
Industrial Ethernet Connector and Harsh Environment Connectors . . . . . I-44
www.hubbell-wiring.com
®
LINKOSITY®
Power Components
Control Connectors Mini-,
Micro-, Nano- & Signal-Quick®
DRUB and PANEL-SAFE®
HI-Impact and CableTrak®
Wiring Device-Kellems
I-1
Power Components - 20A, 30A Up To 600V
Cables and Receptacles
Device Type
Ratings
Wires
20 = 20A up to 600V
PH = Double Ended Cable with
Male/Female Straight
PM = Male Single Ended Straight
PN = Male Single Ended 90°
PF = Female Single Ended Straight
PG = Female Single Ended 90°
PQ = Double Ended Cable with Female 90°
PR = Double Ended Cable with Male 90°
PS = Double Ended Cable with
(2) 90° Connectors
20A up to 600V
Specialty construction
(Includes isolated ground
23 = on 6 wire and #10 AWG super
neutral conductor on 5 and
6 wire devices, PB color
code only)
02
03
04
05
03
04
05
06
Conductor Colors**
Length (FT)
PA = Green/Yellow
Black (all others)
001 = 1'
005 = 5'
010 = 10'
015 = 15'
020 = 20'
025 = 25'
030 = 30'
035 = 35'
040 = 40'
045 = 45'
050 = 50'
PB = Green/Yellow
White
Black (all others)
PE = All Blue***
30 = 30A up to 600V
04
RF = Female Receptacle*
RM = Male Receptacle (Inlet)*
Example: PH
23
06
PB
005
Note: *½" NPT rear thread.
**Other color codes available upon request.
***Two wire only.
Configurations (Male face view shown, female view is opposite)
20 AMP
20A SNIG
(with super neutral and IG)
30 AMP
Tees
TX2304002304T00
Description
Catalog Number
LINKOSITY®
TX2002002002T00
TX2003002003T00
TX2004002004T00
TX2005002005T00
TX2304002304T00
TX2306002306T00
TX2306002304A00
TX2306002304B00
TX2306002304C00
TX3004003004T00
M/F/F Tee, 20A, 2P
LINKOSITY® M/F/F Tee, 20A, 3P
LINKOSITY® M/F/F Tee, 20A, 4P
LINKOSITY® M/F/F Tee, 20A, 5P
LINKOSITY® M/F/F Tee, 20A SNIG, 4P
LINKOSITY® M/F/F Tee, 20A SNIG, 6P
LINKOSITY® M/F/F Tee, 20A SNIG, A Phase Tap
LINKOSITY® M/F/F Tee, 20A SNIG, B Phase Tap
LINKOSITY® M/F/F Tee, 20A SNIG, C Phase Tap
LINKOSITY® M/F/F Tee, 30A, 4P
Closure Caps
CCMBC
I-2
Description
For use with
Female
Receptacle
Male
Inlet
20A and 30A Receptacle Closure Cap
CCMBC
CCFBC
®
Wiring Device-Kellems
www.hubbell-wiring.com
Control Integration Components - 3A Up To 300V, 10A Up To 600V
Cables and Receptacles
Device Type
Ratings
Wires
RF = Female Receptacle*
Length (FT)
PA = Green/Yellow
Black (all others)
001 = 1'
005 = 5'
010 = 10'
015 = 15'
020 = 20'
025 = 25'
030 = 30'
035 = 35'
040 = 40'
045 = 45'
050 = 50'
02
03
04
3A - 2W, 3W
03 = 3A - 4W
up to 300V
PH = Double Ended Cable with
Male/Female Straight
PM = Male Single Ended Straight
PN = Male Single Ended 90°
PF = Female Single Ended Straight
PG = Female Single Ended 90°
PQ = Double Ended Cable with Female 90°
PR = Double Ended Cable with Male 90°
PS = Double Ended Cable with
(2) 90° Connectors
Conductor Colors**
02
03
04
3A - 2W, 3W
R3 = 3A - 4W
up to 300V
PB = Green/Yellow
White
Black (all others)
PE = All Blue***
02
03
04
05
06
07
08
09
10
12
10A - 2W, 3W
10A - 4W
10 = 10A - 5W, 6W, 7W
10A - 8W, 9W
7A - 10W, 12W
up to 600V
RM = Male Receptacle (Inlet)*
Example: PH
10
06
PB
005
Note: *½" NPT rear thread.
**Other color codes available upon request.
***Two wire only.
Configurations (Male face view shown, female view is opposite)
03
Typically used for inputs in DC control circuits
R3
Typically used for outputs in DC control circuits
10
Splitters/Tees
Description
Catalog Number
LINKOSITY®
TX0304000304T00
TX1002001002T00
TX1003001003T00
TX1004001004T00
TX1005001005T00
TX1006001006T00
M/F/F Splitter, 3A/4W
LINKOSITY® M/F/F Tee, 10A, 2 Pole
LINKOSITY® M/F/F Tee, 10A, 3 Pole
LINKOSITY® M/F/F Tee, 10A, 4 Pole
LINKOSITY® M/F/F Tee, 10A, 5 Pole
LINKOSITY® M/F/F Tee, 10A, 6 Pole
TX1004001004T00
Closure Caps
Description
For use with
Female
Receptacle
Male
Inlet
3A Closure Cap
10A Closure Cap, 2, 3, 4, 4, 5 and 6 Pole
10A Closure Cap, 7 and 8 Pole
10A Closure Cap, 9, 10, 12 Pole
CCM1C
CCMAC
CCMBC
CCMCC
CCF1C
CCFAC
CCFBC
CCFCC
www.hubbell-wiring.com
®
Wiring Device-Kellems
CCFAC
I-3
Power System Distribution Assemblies
Device identification marking
Available with up to 5
receptacles, wide variety
of NEMA 5-20 receptacle
grades
Versatile mounting provision
Local or master switch
Power pass thru option
LINKOSITY® connection
16 gauge sheet metal
enclosure ANSI 61 gray
powder coat NEMA 1
Note: Accepts PH2304 series cables.
Straight Blade - UL Type 1
Device Type
M
Switch Types
SL
Twist-Lock®
M
1
2
3
4
5
SL = Switch Local
SM = Switch Master
00 = No Switch
Example: M
Device Type
# Receps
Receptacle Type
Receptacle Feature
Pass-thru
SG = Spec Grade
HG = Hospital Grade
CR = Corrosion Resistant
IG
GF
SS
00
P = Pass-thru**
0 = No Pass-thru
1
=
=
=
=
D = 2 Circuit
Isolated Ground
Ground Fault
Surge Suppression
Standard
SG
Custom Configurations*
00
A = A Phase
B = B Phase
C = C Phase
P
- UL Type 1
Switch Types
# Receps
1
2
3
4
5
SL = Switch Local
SM = Switch Master
00 = No Switch
Example: M
00
Receptacle Type
L1 = 15A
L2 = 20A
3
Receptacle Feature
Pass-thru
Custom Configurations*
IG = Isolated Ground
00 = Standard
P = Pass-thru
0 = No Pass-thru
6 = 250v
L1
IG
0
Note: Local switches control all receptacles in a box. Master switches control local and downstream receptacles. Consult factory for alternate wiring schemes.
*Consult factory for wiring specifications and connecting cables.
**Pass-thru on phase tap boxes are 3Ø.
Switch Only (On/Off) - UL Type 1
Device Type
S
Switch Only (4-Way) - UL Type 1
Switch Types
Switch Style
Poles
1 = 1 Gang
2 = 2 Gang
3 = 3 Gang
2W = On/Off
1P = Single Pole
DP = Two Pole
Example: S
1
2W
Device Type
S
Switch Types
Switch Style
1 = 1 Gang
4W = 4 Way
Example: S
1P
1
4W
Switch Only (3-Way) - UL Type 1
Device Type
S
Switch Types
Switch Style
Position
1 = 1 Gang
3W = 3 Way
M = Main
R = Remote
LM = Line to Main
LR = Load to Remote
Example: S
1
3W
M
Note: For use with Px2304PBxxx series cables.
Features
Receptacle Types
CR
L1
00
Standard
Isolated Ground
—
GF
Ground Fault
—
GFR8300HGYTR
GF20GYLA
SS
Surge Suppression
—
HBL8362GYSA
HBL5362GYSA
—
Switch Types
CR
HG
SG
L1
SL
Local On/Off
—
—
HBL1221PL
—
SM
Master On/Off
—
—
HBL1221PL
—
®
HBL8300GY
SG
IG
I-4
HBL53CM62
HG
—
Wiring Device-Kellems
5362G
HBL4700
CR5352IGGY
IG4700A
—
www.hubbell-wiring.com
Power System Distribution Assemblies
LINKOSITY® Feed - UL Type 3R Rated*
3R Rated Standard Items
Description
Catalog Number
20A 125V Ground Fault
20A 125V Switched, Spec Grade
20A 125V Switched, Ground Fault
20A 125V Spec Grade
20A 125V Ground Fault, Pass-Thru
20A 125V Switched, Spec Grade,
Pass-Thru
20A 125V Switched, Ground Fault
Pass-Thru
Spec Grade, Pass-Thru
M3R002SGGF0
M3RSL1SG000
M3RSL1SGGF0
M3R002SG000
M3R002SGGFP
M3RSL1SG00P
Device
Type Style
M
No. of
Devices Device Type
Type
3R - 3R Lids SL - Switch
3D - 3R Deep
Local
Cover
SM - Switch
Master
1
2
SG HG CR L1 -
Spec Grade
Hospital
Grade
Corrosion
Resistant
15A Locking
00 - None
M3RSL1SGGFP
Device Feature
Pass-Thru
IG - Isolated
Ground
GF - Ground
Fault
SI - Surge/IG
SS - Surge
00 - Standard
P - Pass-Thru
0 - No Pass-Thru
M3R002SG00P
Note: *When cover closed.
Accepts PH2304 series cables.
LINKOSITY® Feed - UL Type 4X Rated*
4X Rated NEMA Standard Items
Description
Catalog Number
20A 125V Straight Blade
20A 125V WTSSTL
20A 125V Straight Blade, Pass-Thru
20A 125V WTSSTL, Pass-Thru
MLWF2010
MLWF2020
MLWF201P
MLWF202P
Device
Type Style
M
No. of
Devices Device Type
Type
L - LINKOSITY WF - Watertight
Safety-Shroud
Receptacle
2
WM - Watertight
Safety-Shroud
Inlet
Note: *Watertight Safety-Shroud® Twist-Lock ® Plug required
when in use.
**Straight Blade are UL Type 4X when not in use only.
WTSSTL is an abbreviation for Watertight Safety-Shroud®
Twist-Lock®.
Accepts PH2304 series cables.
Pass-Thru
01 - 20A 125V Straight Blade**
02 - 20A 125V Twist-Lock
03 - 20A 250V Twist-Lock
04 - 20A 277V Twist-Lock
05 - 30A 125V Twist-Lock
06 - 30A 250V Twist-Lock
07 - 20A 125/250V Twist-Lock
08 - 20A 3Ø 250V Twist-Lock
09 - 20A 3Ø 480V Twist-Lock
10 - 30A125/250V Twist-Lock
11 - 30A 3Ø 250V Twist-Lock
12 - 30A 3Ø 480V Twist-Lock
13 - 30A 3Ø 600V Twist-Lock
P - Pass-Thru
0 - No Pass-Thru
All LINKOSITY® - UL Type 4X Rated*
4X Rated LINKOSITY Standard Items
Description
Catalog Number
20A 3W up to 600V, 4 Port
M4L2003PB0
20A 3W up to 600V, 4 Port Pass-Thru M4L2003PBP
Device
Type Style
M
4L LINKOSITY
Note: *Closure Cap required when not in use.
Accepts PH2304 series cables.
No. of
Poles
Type
20 - 20A
23 - 20A
Super Neutral
Isolated Ground
02
03
04
05
06
30 - 30A
Conductor Colors
Pass - Thru
PA - Green/Yellow
Black (all others)
P - Pass-Thru
0 - No Pass-Thru
PB - Green/Yellow
White
Black (all others)
Conduit Feed - UL Type 4X Rated*
Conduit Feed Standard Items
Description
Catalog Number
20A 125V Straight Blade
20A 125V WTSSTL
20A 250V WTSSTL
20A 277V WTSSTL
30A 125V WTSSTL
30A 250V WTSSTL
20A 125/250V WTSSTL
20A 3Ø, 250V WTSSTL
20A 3Ø, 480V WTSSTL
30A 125/250V WTSSTL
30A 3Ø 250V WTSSTL
30A 3Ø 480V WTSSTL
30A 3Ø 600V WTSSTL
MCWF2010
MCWF2020
MCWF2030
MCWF2040
MCWF2050
MCWF2060
MCWF2070
MCWF2080
MCWF2090
MCWF2100
MCWF2110
MCWF2120
MCWF2130
Device
Type Style
M
C - Conduit
Feed
No. of
Devices NEMA Device Type
Type
WF - Watertight
Safety-Shroud
Receptacles
2
WM - Watertight
Safety-Shroud
Inlet
Pass-Thru
01 - 20A 125V Straight Blade
02 - 20A 125V Twist-Lock
03 - 20A 250V Twist-Lock
04 - 20A 277V Twist-Lock
05 - 30A 125V Twist-Lock
06 - 30A 250V Twist-Lock
07 - 20A 125/250V Twist-Lock
08 - 20A 3Ø 250V Twist-Lock
09 - 20A 3Ø 480V Twist-Lock
10 - 30A125/250V Twist-Lock
11 - 30A 3Ø 250V Twist-Lock
12 - 30A 3Ø 480V Twist-Lock
13 - 30A 3Ø 600V Twist-Lock
0 - No Pass-Thru
Note: *Watertight Safety-Shroud® Twist-Lock ® Plug required
when in use.
WTSSTL is an abbreviation for Watertight Safety-Shroud®
Twist-Lock®.
Replacement Mounting Feet
Description
Catalog Number
For Power Distribution Assemblies.
HBLRFT1∆
HBLRFT1
Note: ∆ Package of 10 mounting feet and 10 screws.
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-5
Specifications
Add Label Only When
Assembled With Gfci
Receptacle
Dim. 'A'
Dim. 'B'
Dim. 'C'
FUSE
Not to exceed
20 amps
CAUTION
Do not connect
or disconnect
with power on
Power In
(2X) .218 X 3.270 Slot
RECP1A
POWER OUT IS
NOT GFCI
PROTECTED
CAUTION
Do not connect
or disconnect
with power on
Dim. 'D'
Power Out
RECP1B
Wiring Device-Kellems
Catalog Number M001****P Shown
Catalog Number
Gangs
Dimension 'A'
Dimension 'B'
Dimension 'C'
Dimension 'D'
1
2
3
4
5
5.50 (139.7)
7.50 (190.5)
9.50 (241.3)
11.50 (292.1)
13.50 (342.9)
4.75 (120.7)
6.75 (171.5)
8.75 (222.3)
10.75 (273.1)
12.75 (323.9)
2.25 (57.2)
2.25 (57.2)
2.25 (57.2)
2.25 (57.2)
2.25 (57.2)
4.53 (115.1)
4.53 (115.1)
4.53 (115.1)
4.53 (115.1)
4.53 (115.1)
M001****P
M002****P
M003****P
M004****P
M005****P
LINKOSITY® Specifications
Certifications
System Level
ETL Classified to NEC
Component Assemblies (PSDA)
UL Listed
Connecting Components
Listed to UL2238 and UL 50
Cable (Up to #22 AWG)
UL 300V Type ITC/PLTC 105ºC
Cable (#16 AWG and Up)
UL 600V Type TC-ER, MTW 90ºC or STOOW 600V 105ºC
Cable Diameter
Amps
Wires
O.D.
20
3
.595 (15.1)
20
4
.645 (16.4)
20
5
.710 (18.0)
20
6
.760 (19.3)
30
4
.710 (18.0)
Performance
Electrical
Voltage
Up to 600V
Amperage
Up to 30A
Environmental
Connectivity System Components
Moisture Resistance
UL Type 4, 4X, 12 and 13
Ingress Protection
IP66 Suitability
Flammability
UL94HB Cables/UL94V-0 receptacles
Power System Distribution Assemblies
Moisture Resistance
NEMA Type 1, Type 3R, Type 4X
Dimensions in Inches (mm)
I-6
®
Wiring Device-Kellems
www.hubbell-wiring.com
Disconnect Switches
Thermoplastic Cover
on Plated Steel Base
Type 4X Enclosure
Lockable Handle to
Meet OSHA Lockout/
Tagout Regulations
NEMA 1 Enclosure
Pre-wired with
LINKOSITY®
Components
High Impact Valox®
Enclosure
HBLDS3MQ5
Crush and Impact
Resistance of
MC Cable
HBL1389MQ5
Cable Ratings:
TC-ER, MTW, STOOW
Quick Disconnect Switches
Type 1 Non-Metallic Enclosure 30A 3 Pole 600V AC
Catalog Number
HBL1389D with one pre-wired LINKOSITY® female receptacle (load side).
HBL1389D with 5 foot pre-wired LINKOSITY® female cable (load side).
HBL1389D with one pre-wired LINKOSITY® male receptacle (line side) and
one pre-wired LINKOSITY® female receptacle (load side).
HBL1389MQR
HBL1389MQ5
HBL1389MQR2
Type 4X Non-Metallic Enclosure 30A 3 Pole 600V AC
HBLDS3 with one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3 with 5 foot pre-wired LINKOSITY® female cable (load side).
HBLDS3 with one pre-wired LINKOSITY® male receptacle (line side)
and one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3MQR
HBLDS3MQ5
HBLDS3MQR2
HBL1389MQR2
Type 4X Stainless Steel Enclosure 30A 3 Pole 600V AC
HBLDS3SS with one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3SS with 5 foot pre-wired LINKOSITY® female cable (load side).
HBLDS3SS with one pre-wired LINKOSITY® male receptacle (line side)
and one pre-wired LINKOSITY® female receptacle (load side).
HBLDS3SSMQR
HBLDS3SSMQ5
HBLDS3SSMQR2
HBL1389MQ5
Accessories
Description
Catalog Number
3P 4W LINKOSITY® male receptacle for installation on motor.
3P 4W LINKOSITY® female receptacle for installation in switch.
3P 4W LINKOSITY® double ended (male/female) 5-50 foot cable.
3P 4W LINKOSITY® single ended (female) 5-50 foot cable.
Cord connector, ¾ in. NPT .63–.75 in. (16.0–19.1) diameter.
Lock-on cover for LINKOSITY® connections.
RM3004PA001
RF3004PA001
PH3004PAxxx*
PF3004PAxxx*
SHC1037CR
PH2030C
HBLDS3MQR
Note: *Cables available from 5-50 feet in 5 foot increments. To purchase larger cable, replace the XXX with the required
length in feet. (Examples: PH3004PA005 = 5 foot cable, PH3004PA050 = 50 foot cable.)
Sample Set Up
(1) HBLDS3MQR
+
(1) PH3004PAxxx
+
+
(1) RM3004PA001
+
=
Total Set Up**
=
HBLDS3MQ5
Note: ** Retrofit parts available for pre-existing disconnect switch installations.
Please consult factory for availability.
PH2030C
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-7
Mini-Quick® Control Connectors
Features and Benefits
Hard Gold Over Palladium Nickel Contact Plating
Superior conductivity, extended contact life
Gated Strain Relief with Graduated Window Sizes
Improved flexibility and strength protects wire
terminations; superior arc of bend control
Indicator Ring
Ensures proper mating
O-Rings
Moisture protection
Anti-Vibration Coupling Nut
Prevents coupling nut from loosening
under harsh vibration conditions
Leaded Nickel Copper Sleeved Contact
Extended contact life and continuity
Features
Benefits
• Nickel plated brass coupling nuts and receptacle shells.
• Black overmold and cable.
• Cable assembly resists dirt and blends with environment giving a
clean look to the installation.
• Insulgrip connector body design.
• Ergonomic connector body has an industrial look.
• UL Listed cable assemblies and receptacles.
• Third party certified for electrical, mechanical and environmental
performance.
• Plating resists corrosion in high abuse environments.
Material Specifications
Insulator Materials
Contact Materials
Contact Plating
Overmold Material
Coupling Nut, Metallic
Coupling Nut, Nylon
Receptacle Shell
Receptacle Shell, Nylon
Receptacle Shell, Right Angle
Nylon 6/6, White
Pins - Brass, Sockets
Leaded nickel copper w/ stainless
steel sleeve
Hard gold over palladium/nickel
Polyurethane, Black
Nickel plated brass
Nylon 6/6, Black
Nickel plated brass,
SST consult factory
Nylon 6/6, Black
Nickel plated zinc alloy die cast,
SST consult factory
Cable
Strain Relief
#16 AWG SEOOW - TPE jacket, Black, PVC conductor
insulation, Stranding - 65/34
#18 AWG SEOOW - TPE jacket, Black, PVC conductor
insulation, Stranding - 41/34
#18 AWM2661 - PVC jacket, Black, PVC conductor
insulation, Stranding - 41/34
#16 AWG and #18 AWG - 30 pounds min per UL2238
Electrical Specifications
Environmental Specifications
Voltage Rating
Amperage
Moisture Protection
UL Type 4, 4X, 12 and 13
Ingress Protection
IP66 Suitability
Operating Temperature AWM2661 cables: -20°C to 105° C
SEOOW cable: -40°C to 105° C
Corrosion Resistance 500 hours salt spray per MIL-STD-1344, Method 1001
Vibration Resistance
10 - 2,000 Hz @15g per MIL-STD-1344, Method 2005
Contact Resistance
Isolation Resistance
600V DC/600V AC
#16 AWG - 2&3P=15A, 4P=12A, 5&6P=10A
7P=10A, 8&9P=9A, 10&12P=8A
#18 AWG - 2&3P=11A, 4P=8A, 5&6P=7A
≤ 5 mΩ
≥ 1000 MΩ
Certifications
UL 2238 and UL50E, File No. E192071
I-8
CSA Certified, C22.2 No. 182.3 and CSA C22.2 No. 94.2-07
®
Wiring Device-Kellems
www.hubbell-wiring.com
Mini-Quick® Control Connectors
2 - 6 Pole Plugs
Choose the appropriate configuration from the Selector below.
Hubbell Logic Configurator
For example, catalog number HCMA05212 is derived as follows:
DEVICE
TYPE
COUPLING NUT
MATERIAL
HC = Plug, Female
HP= Plug, Male
HI = Plug, Male Inline
HE = Male/Female
Extension Cable
HJ = Male/Female
Jumper Cable
M = Metallic
N = Nylon
BODY
STYLE
POLES
A = Right Angle
S = Straight
02
03
04
05
06
CONDUCTOR
TYPE
CABLE
LENGTH (ft)
1 = #16 AWG SEOOW Cable
3 = #18 AWM2661 IEC Cable*
4 = #18 AWG SEOOW Cable
**
03
06
12
20
**Replace with
Length
*3 - 5 Pole Only
M
HC
05
A
12
2
Note: Availability of specific items may vary. Consult factory for delivery. Consult the factory for additional cable lengths or cable types.
Available with metallic coupling nut only.
2 - 6 Pole Plugs
Catalog numbers using #16 AWG SEOOW cable are listed below. For #18 AWG SEOOW or #18 AWM2661 IEC cable, change the
conductor type per the Hubbell Logic chart above.
Poles
Male Face Shown
Female - mirror
image
1
2
3
4
5
6
2
1
2
3
1
4
2
3
1
5
2
1
2
3
6
3
4
5
4
Female Plugs
Male Plugs
Male/Female
JumperCables
Cable Length
Straight
Right Angle
Straight
Right Angle
Straight
3 ft (0.91m)
6 ft (1.83m)
12 ft (3.66m)
All other lengths
HCMS02103
HCMS02106
HCMS02112
HCMS021**
HCMA02103
HCMA02106
HCMA02112
HCMA021**
HPMS02103
HPMS02106
HPMS02112
HPMS021**
HPMA02103
HPMA02106
HPMA02112
HPMA021**
HJMS02103
HJMS02106
HJMS02112
HJMS021**
3 ft (0.91m)
6 ft (1.83m)
12 ft (3.66m)
All other lengths
HCMS03103
HCMS03106
HCMS03112
HCMS031**
HCMA03103
HCMA03106
HCMA03112
HCMA031**
HPMS03103
HPMS03106
HPMS03112
HPMS031**
HPMA03103
HPMA03106
HPMA03112
HPMA031**
HJMS03103
HJMS03106
HJMS03112
HJMS031**
3 ft (0.91m)
6 ft (1.83m)
12 ft (3.66m)
All other lengths
HCMS04103
HCMS04106
HCMS04112
HCMS041**
HCMA04103
HCMA04106
HCMA04112
HCMA041**
HPMS04103
HPMS04106
HPMS04112
HPMS041**
HPMA04103
HPMA04106
HPMA04112
HPMA041**
HJMS04103
HJMS04106
HJMS04112
HJMS041**
3 ft (0.91m)
6 ft (1.83m)
12 ft/3.66m)
All other lengths
HCMS05103
HCMS05106
HCMS05112
HCMS051**
HCMA05103
HCMA05106
HCMA05112
HCMA051**
HPMS05103
HPMS05106
HPMS05112
HPMS051**
HPMA05103
HPMA05106
HPMA05112
HPMA051**
HJMS05103
HJMS05106
HJMS05112
HJMS051**
3 ft/0.91m)
6 ft/1.83m)
12 ft/3.66m)
All other lengths
HCMS06103
HCMS06106
HCMS06112
HCMS061**
HCMA06103
HCMA06106
HCMA06112
HCMA061**
HPMS06103
HPMS06106
HPMS06112
HPMS061**
HPMA06103
HPMA06106
HPMA06112
HPMA061**
HJMS06103
HJMS06106
HJMS06112
HJMS061**
Note: Replace ** with length required in feet. For nylon coupling nuts, replace “M” with “N” per the ordering chart above.
Example: change HPMA05106 to HPNA05106.
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-9
Mini-Quick® Control Connectors
2 - 6 Pole Plugs
Straight Plug
Jumper Cable
B
A
B
B
A
A
MALE
FEMALE
A
0.99" (25.2)
0.99 (25.2)
B
2.44" (62.0)
2.40 (61.0)
C
2.75" (69.9)
2.75 (69.9)
7/8 - 16
UN Thread
7/8 - 16 UN Thread
7/8 - 16 UN Thread
C
Right Angle Plug
D
B
7/8 - 16 UN
Thread
C
FEMALE
A
0.99" (25.2)
0.99" (25.2)
B
2.44" (62.0)
2.40" (61.0)
B
2.14" (54.4)
2.14" (54.4)
C
2.75" (69.9)
2.75" (69.9)
D
1.03" (26.2)
1.03" (26.2)
E
1.64" (40.6)
1.60" (40.6)
B
A
A
7/8 - 16 UN Thread
7/8 - 16 UN Thread
MALE
FEMALE
A
0.99" (25.2)
0.99" (25.2)
B
2.47" (62.7)
2.40" (61.0)
Cable Diameters By Cable Type
A
Number of
Conductors
MALE
7/8 - 16
UN Thread
B
A
0.99" (25.2)
B
2.47" (62.8)
C
2.75" (69.9)
2
3
4
5
6
Right Angle version also available.
Number of
Conductors
C
#16 AWG
SEOOW
#18 AWG
SEOOW
0.37" (9.4)
0.39" (9.9)
0.42" (10.7)
0.50" (12.7)
0.52" (13.2)
0.35" (8.9)
0.37" (9.4)
0.39" (9.9)
0.47" (11.9)
0.48" (12.2)
#18 AWM2661
IEC
3
4
5
Accessories
Closure caps protect plugs and receptacles when not in use. Adapter
rings allow the mating of male and female plugs for in-line applications.
Shell size is 1, and the thread is 7/8-16 UN.
Description
Catalog Number
Closure Cap
HPCAP1
6.00"
(152.4)
1.12"
(28.5)
HRCAP1
0.26" (6.6)
0.26" (6.6)
0.26" (6.6)
Conductor Color Code
#16 AWG SEOOW Plugs
Contact
Number
0.56"
(14.2)
1
2
3
4
5
6
2
Pole
3
Pole
4
Pole
White
Black
Green
Black
White
Black
White
Red
Green
Contact
Number
6.00"
(152.4)
1.13"
(28.6)
6
Pole
White
Red
Green
Orange
Black
White
Red
Green
Orange
Black
Blue
1
2
3
4
5
3
Pole
4
Pole
5
Pole
Green
Black
White
Black
White
Red
Green
White
Red
Green
Orange
Black
3
Pole
4
Pole
5
Pole
Yellow/Green
Brown
Blue
Black
Blue
Brown
White
Black
Blue
Yellow/Green
Brown
White
#18 AWM 2661 IEC
Contact
Number
HMQAR1
0.48"
(12.3)
1.00"
(25.4)
5
Pole
#18 AWG SEOOW Plugs
0.58"
(14.7)
Adapter Ring
0.99" (25.2)
B
MALE
Inline Plug
Closure Cap
FEMALE
0.99" (25.2)
Male/Female Extension Cable
E
A
MALE
A
1
2
3
4
5
Dimensions in Inches (mm)
I-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
Mini-Quick® Control Connectors
2 - 6 Pole Receptacles
Choose the appropriate configuration from the Selector below.
Hubbell Logic Configurator
For example, catalog number HBMS05501 is derived as follows:
DEVICE
TYPE
SHELL
MATERIAL
BODY
STYLE
M = Metallic
N = Nylon
HR = Receptacle,
Female
HB = Receptacle,
Male
A = Right Angle*
S = Straight
F = Flange Mount*
CONDUCTOR
TYPE
LEAD WIRE
LENGTH (ft)
5 = #16 AWG Discrete Wire
6 = #18 AWG IEC Discrete Wire
(IEC colors)*
01*
**
POLES
02
03
04
05
06
*Metallic Only
M
HB
S
*1 Standard
Length
**Replace with
Length
*3 - 5 Pole Only
05
01
5
Note: Availability of specific items may vary. Consult factory for delivery. Use this chart to build receptacles to meet any application need.
Consult the factory for additional wire lengths or wire types.
2 - 6 Pole Receptacles
#16 AWG Discrete Wire
Poles
Male Face
Shown Female mirror image
1
2
3
4
5
6
2
1
2
3
1
4
2
3
1
5
2
4
1
2
3
6
3
5
4
Female Receptacles
Straight
Nylon
Right Angle
Male Receptacles
Flange Mount
Straight
Nylon
Right Angle
Flange Mount
HRMS02501 HRNS02501
HRMA02501 HRMF02501 HBMS02501 HBNS02501
HBMA02501 HBMF02501
HRMS03501 HRNS03501
HRMA03501 HRMF03501 HBMS03501 HBNS03501
HBMA03501 HBMF03501
HRMS04501 HRNS04501
HRMA04501 HRMF04501 HBMS04501 HBNS04501
HBMA04501 HBMF04501
HRMS05501 HRNS05501
HRMA05501 HRMF05501 HBMS05501 HBNS05501
HBMA05501 HBMF05501
HRMS06501 HRNS06501
HRMA06501 HRMF06501 HBMS06501 HBNS06501
HBMA06501 HBMF06501
Note: For #18 AWG IEC discrete wire, change the conductor type using the Hubbell Logic chart above.
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-11
Mini-Quick® Control Connectors
2 - 6 Pole Receptacles
Straight Receptacles
Flange Mount Receptacles
A
B
C
D
F Panel
cutout
A
MALE
FEMALE
A
1.14" (29.0)
1.14" (29.0)
B
1.11" (28.2)
1.11" (28.2)
C
0.44" (11.2)
0.44" (11.2)
D
12.0" (304.8) 12.0" (304.8)
F
0.88" (22.4)
0.83" (22.4)
G
0.25" (6.4)
0.25" (6.4)
G
A
I
G
C
B
H
½" NPT
Thread*
7/8 - 16 UN
Thread
G Max panel thickness
F
Note: *IEC receptacle has PG13.5
rear thread.
7/8 - 16 UN Thread
Right Angle Receptacles
7/8 - 16 UN
Thread
A
H
MALE
FEMALE
A
1.25" (31.75)
1.25" (31.75)
B
1.11" (28.19)
1.11" (28.19)
C
0.44" (11.18)
0.44" (11.18)
D
12.0" (304.8)
12.0" (304.8)
F
0.75" (19.05)
0.75" (19.05)
G
0.86" (21.84)
0.86" (21.84)
H
0.45" (11.43)
0.45" (11.43)
I
0.12" (03.02)
0.12" (03.02)
D
B
E
G
C
D
½" NPT
Thread
F
MALE
FEMALE
A
1.14" (29.0)
1.14" (29.0)
B
1.76" (44.7)
1.76" (44.7)
C
0.25" (6.4)
0.25" (6.4)
D
12.0" (304.8)
12.0" (304.8)
E
0.97" (24.6)
0.97" (24.6)
F
0.83" (21.8)
0.83" (21.8)
G
1.36" (34.5)
1.36" (34.5)
H
1.26" (32.0)
1.26" (32.0)
Accessories
Color Code By Wire Type
Closure caps protect plugs and receptacles when not in use.
Shell size is 1, and the thread is 7/8-16 UN.
#16 AWG Receptacles
Contact
2
Number
Pole
Description
Catalog Number
Closure Cap
HPCAP1
6.00"
(152.4)
0.56"
(14.2)
1.12"
(28.5)
Closure Cap
HRCAP1
6.00"
(152.4)
0.58"
(14.7)
1
2
3
4
5
6
White
Black
3
Pole
4
Pole
5
Pole
6
Pole
Green
Black
White
Black
White
Red
Green
White
Red
Green
Orange
Black
White
Red
Green
Orange
Black
Blue
4
Pole
5
Pole
Black
Blue
Brown
White
Black
Blue
Yellow/Green
Brown
White
#18 AWG Receptacles
Contact
3
Number
Pole
1
2
3
4
5
Yellow/Green
Brown
Blue
1.13"
(28.6)
Dimensions in Inches (mm)
I-12
®
Wiring Device-Kellems
www.hubbell-wiring.com
Mini-Quick® Control Connectors
7 - 12 Pole Plugs
Choose the appropriate configuration from the Selector below.
Hubbell Logic Configurator
For example, catalog number HCMA08112 is derived as follows:
DEVICE
TYPE
COUPLING NUT
MATERIAL
M = Metallic
N = Nylon
HC = Plug, Female
HP = Plug, Male
HJ = Male/Female
Jumper Cable
BODY
STYLE
CONDUCTOR
TYPE
POLES
A = Right Angle
S = Straight
CABLE
LENGTH (ft)
**
03
06
12
20
1 = #16 AWG SEOOW Cable
07
08
09
10
12
**Replace with
Length
M
HC
08
A
12
1
Note: Availability of specific items may vary. Consult factory for delivery. Consult the factory for additional cable lengths or cable types.
7 - 12 Pole Plugs
Catalog numbers using #16 AWG SEOOW cable are listed below.
Poles
7
Male Face Shown
Female - mirror
image
1
7
3
8
2
8
3
1
9
10
2
8
9
4
8
9
10
HCMS07103
HCMS07106
HCMS07112
HCMS071**
HCMA07103
HCMA07106
HCMA07112
HCMA071**
HPMS07103
HPMS07106
HPMS07112
HPMS071**
HPMA07103
HPMA07106
HPMA07112
HPMA071**
HJMS07103
HJMS07106
HJMS07112
HJMS071**
5
3 ft (0.91m)
6 ft (1.83m)
12 ft (3.66m)
All other lengths
HCMS08103
HCMS08106
HCMS08112
HCMS081**
HCMA08103
HCMA08106
HCMA08112
HCMA081**
HPMS08103
HPMS08106
HPMS08112
HPMS081**
HPMA08103
HPMA08106
HPMA08112
HPMA081**
HJMS08103
HJMS08106
HJMS08112
HJMS081**
5
3 ft (0.91m)
6 ft (1.83m)
12 ft (3.66m)
All other lengths
HCMS09103
HCMS09106
HCMS09112
HCMS091**
HCMA09103
HCMA09106
HCMA09112
HCMA091**
HPMS09103
HPMS09106
HPMS09112
HPMS091**
HPMA09103
HPMA09106
HPMA09112
HPMA091**
HJMS09103
HJMS09106
HJMS09112
HJMS091**
6
3 ft (0.91m)
6 ft (1.83m)
12 ft/3.66m)
All other lengths
HCMS10103
HCMS10106
HCMS10112
HCMS101**
HCMA10103
HCMA10106
HCMA10112
HCMA101**
HPMS10103
HPMS10106
HPMS10112
HPMS101**
HPMA10103
HPMA10106
HPMA10112
HPMA101**
HJMS10103
HJMS10106
HJMS10112
HJMS101**
7
3 ft/0.91m)
6 ft/1.83m)
12 ft/3.66m)
All other lengths
HCMS12103
HCMS12106
HCMS12112
HCMS121**
HCMA12103
HCMA12106
HCMA12112
HCMA121**
HPMS12103
HPMS12106
HPMS12112
HPMS121**
HPMA12103
HPMA12106
HPMA12112
HPMA121**
HJMS12103
HJMS12106
HJMS12112
HJMS121**
5
8
12
11
4
5
3 ft (0.91m)
6 ft (1.83m)
12 ft (3.66m)
All other lengths
10
9
3
Straight
7
4
1
2
Right Angle
6
3
3
12
Straight
4
7
1
2
Right Angle
6
7
6
5
Male/Female
JumperCables
Straight
4
1
Male Plugs
Cable Length
6
2
Female Plugs
Note: Replace ** with length required in feet. For nylon coupling nuts, replace “M” with “N” per the ordering chart above.
Example: change HPMA07106 to HPNA07106.
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-13
Mini-Quick® Control Connectors
7 - 12 Pole Plugs
Straight Plug
Right Angle Plug
7 - 8 Pole
A
MALE
D
B
7 - 8 Pole
FEMALE
A
A
1.12" (28.5)
1.12" (28.5)
B
2.53" (64.3)
2.49" (63.3)
C
2.75" (69.9)
2.75" (69.9)
D
MALE
B
C
D
F
1 - 16 UN Thread
9 - 12 Pole
C
MALE
A
1.25" (31.8)
1.25" (31.8)
B
2.77" (70.4)
2.73" (69.3)
C
2.75" (69.9)
2.75" (69.9)
D
Jumper Cable
B
FEMALE
B
MALE
FEMALE
A
1.12" (28.5)
1.12" (28.5)
B
2.53" (64.3)
2.49" (63.3)
C
C
7 - 8 Pole
Cable Diameters
By Cable Type
Number of
Conductors
1.12" (28.5)
1.12" (28.5)
2.22" (56.4)
2.22" (56.4)
E
2.75" (69.9)
2.75" (69.9)
1 - 16 UN Thread
FEMALE
A
1.25" (31.8)
1.25" (31.8)
B
1.84" (47.0)
1.80" (45.7)
C
1.25" (31.8)
1.25" (31.8)
D
2.54" (64.5)
2.54" (64.5)
E
2.75" (69.9)
2.75" (69.9)
F
1 1/8 - 16 UN Thread
FEMALE
A
1.25" (31.8)
1.25" (31.8)
B
2.77" (70.4)
2.73" (69.3)
1 1/8 - 16 UN Thread
Conductor Color Code
#16 AWG SEOOW Plugs
#16 AWG
STOOW
7
8
9
10
12
C
D
9 - 12 Pole
MALE
C
1 - 16 UN Thread
1.14" (29.0)
1.69" (42.9)
9 - 12 Pole
A
C
1.14" (29.0)
1.73" (43.9)
MALE
1 1/8 - 16 UN Thread
A
A
B
F
E
FEMALE
Contact
Number
0.52" (13.2)
0.56" (14.2)
0.60" (15.2)
0.65" (16.7)
0.70" (17.7)
1
2
3
4
5
6
7
8
9
10
11
12
Accessories
2
Pole
3
Pole
White
Black
Green
Black
White
4
Pole
5
Pole
Black White
White
Red
Red
Green
Green Orange
Black
6
Pole
7
Pole
8
Pole
9
Pole
10
Pole
12
Pole
White White/Black Orange
Orange
Orange
Orange
Red
Black
Blue
Blue
Blue
Blue
Green
White
White/Black Red/Black White/Black White/Black
Orange
Red
Black
Green/Black Red/Black
Red/Black
Black Orange
White
White
Green/Black Green/Black
Blue
Blue
Red
Red
Orange/Black Orange/Black
Green
Green
Green
Red
Blue/Black
Red/Black White/Black
Green
Black/White
Black
Black
Green
White
Red
White
Black
Closure caps protect plugs and receptacles when not in use. Adapter rings allow the mating of male and female plugs for in-line applications.
Closure Cap
Description
Shell
Size
Thread Size
7 to 8 Pole
ll
1 - 16 UN
9 to 12 Pole
lll
1 1/8 - 16UN
Closure Cap
Catalog Number
Shell
Size
Thread Size
HPCAP2
ll
1 - 16 UN
HPCAP3
lll
1 1/8 - 16UN
Adapter Ring
Catalog Number
Shell
Size
Thread Size
Catalog Number
HRCAP2
ll
1 - 16 UN
HMQAR2
HRCAP3
lll
1 1/8 - 16UN
HMQAR3
6.00"
(152.4)
6.00"
(152.4)
0.48"
(12.3)
0.58"
(14.7)
0.56"
(14.2)
1.12"
(28.5)
Cap Size
1.13"
(28.6)
II- 1.12" (28.5), III- 1.25" (31.8)
II- 1.13" (28.6), III- 1.25" (31.8)
1.00"
(25.4)
II- 1.00" (25.4), III- 1.13" (28.6)
Dimensions in Inches (mm)
I-14
®
Wiring Device-Kellems
www.hubbell-wiring.com
Mini-Quick® Control Connectors
7 - 12 Pole Receptacles
Choose the appropriate configuration from the Selector below.
Hubbell Logic Configurator
For example, catalog number HRMS10501 is derived as follows:
DEVICE
TYPE
SHELL
MATERIAL
M = Metallic
HR = Receptacle,
Female
HB = Receptacle,
Male
BODY
STYLE
S = Straight
CONDUCTOR
TYPE
POLES
07
08
09
10
12
5 = #16 AWG Discrete Wire
LEAD WIRE
LENGTH (ft)
01*
**
*1 Standard
Length
**Replace with
Length
M
HR
S
10
5
01
Note: Availability of specific items may vary. Consult factory for delivery. Consult the factory for additional wire lengths or wire types.
7 - 12 Pole Receptacles
#16 AWG Discrete Wire
Poles
7
Male Face Shown
Female - mirror
image
1
6
2
7
3
8
1
8
1
10
9
3
4
8
9
HBMS08501
5
HRMS09501
HBMS09501
6
HRMS10501
HBMS10501
7
HRMS12501
HBMS12501
7
9
10
8
12
11
4
HRMS08501
5
4
3
5
10
1
2
HBMS07501
6
7
3
12
HRMS07501
4
8
1
2
5
6
7
2
2
Male
Receptacles
4
3
9
Female
Receptacles
6
5
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-15
Mini-Quick® Control Connectors
7 - 12 Pole Receptacles
Straight Receptacles
7 - 8 Pole
A
C
B
D
F
Panel
cutout
½" NPT
Thread
H
G
Max panel thickness
MALE
FEMALE
A
1.29" (32.8)
1.29" (32.8)
B
1.44" (36.6)
1.44" (36.6)
C
0.80" (20.3)
0.80" (20.3)
D
12.0" (304.8)
12.0" (304.8)
F
0.83" (21.1)
0.83" (21.1)
G
0.25" (6.4)
0.25" (6.4)
H
1 - 16 UN Thread
9 - 12 Pole
MALE
FEMALE
A
1.44" (36.6)
1.44" (36.6)
B
1.62" (41.2)
1.62" (41.2)
C
0.96" (24.4)
0.96" (24.4)
D
12.0" (304.8)
12.0" (304.8)
F
0.83" (21.1)
0.83" (21.1)
G
0.25" (6.4)
0.25" (6.4)
H
1 1/8 - 16 UN Thread
Conductor Color Code
#16 AWG Receptacles
Contact
Number
1
2
3
4
5
6
7
8
9
10
11
12
2
Pole
3
Pole
4
Pole
5
Pole
6
Pole
7
Pole
8
Pole
9
Pole
10
Pole
12
Pole
White
Black
Green
Black
White
Black
White
Red
Green
White
Red
Green
Orange
Black
White
Red
Green
Orange
Black
Blue
White/Black
Black
White
Red
Orange
Blue
Green
Orange
Blue
White/Black
Black
White
Red
Green
Red/Black
Orange
Blue
Red/Black
Green/Black
White
Red
Green
White/Black
Black
Orange
Blue
White/Black
Red/Black
Green/Black
Orange/Black
Red
Green
Black
White
Orange
Blue
White/Black
Red/Black
Green/Black
Orange/Black
Blue/Black
Black/White
Green
Red
White
Black
Accessories
Closure caps protect plugs and receptacles when not in use. Adapter rings allow the mating of male and female plugs for in-line applications.
Closure Cap
Closure Cap
Description
Shell
Size
Thread Size
7 to 8 Pole
ll
1 - 16 UN
9 to 12 Pole
lll
1 1/8 - 16UN
Adapter Ring
Catalog Number
Shell
Size
Thread Size
HPCAP2
ll
1 - 16 UN
HPCAP3
lll
1 1/8 - 16UN
Catalog Number
Shell
Size
Thread Size
Catalog Number
HRCAP2
ll
1 - 16 UN
HMQAR2
HRCAP3
lll
1 1/8 - 16UN
HMQAR3
6.00"
(152.4)
6.00"
(152.4)
0.48"
(12.3)
0.58"
(14.7)
0.56"
(14.2)
1.12"
(28.5)
Cap Size
1.13"
(28.6)
II- 1.12" (28.5), III- 1.25" (31.8)
II- 1.13" (28.6), III- 1.25" (31.8)
1.00"
(25.4)
II- 1.00" (25.4), III- 1.13" (28.6)
Dimensions in Inches (mm)
I-16
®
Wiring Device-Kellems
www.hubbell-wiring.com
Mini-Quick® Control Connectors
Field Attachable Connectors - Screw Terminal Style
Coupling Nut
Anodized Aluminum,
SST Option Consult Factory
Precision Wire Funnels
Eliminate Stray Strands
Body
High Impact Design
Superior Contact Design
Utilizing High Performance
Gold Over Palladium Nickel Plating
Strain Relief
Protects Terminations
3 - 5 Pole Field Attachable Connectors
Poles
Male Face Shown
Female - mirror
image
3
4
5
1
2
3
1
4
2
3
1
5
2
4
3
Female Connector
Wire Size, Max
Right Angle
Straight
Right Angle
Straight
Right Angle
.24"-.32" (6.1-8.1)
.39"-.47" (9.9-11.9)
.47"-.55" (11.9-13.1)
HCMS03F9
HCMS03F13
—
HCMA03F9
—
—
HIMS03F9
HIMS03F13
—
HIMA03F9
—
—
HPMS03F9
HPMS03F13
—
HPMA03F9
—
—
.24"-.32" (6.1-8.1)
.39"-.47" (9.9-11.9)
.47"-.55" (11.9-13.1)
HCMS04F9
HCMS04F13
HCMS04F16
HCMA04F9
—
—
HIMS04F9
HIMS04F13
HIMS04F16
HIMA04F9
—
—
HPMS04F9
HPMS04F13
HPMS04F16
HPMA04F9
—
—
.24"-.32" (6.1-8.1)
.39"-.47" (9.9-11.9)
.47"-.55" (11.9-13.1)
HCMS05F9
HCMS05F13
HCMS05F16
HCMA05F9
—
—
HIMS05F9
HIMS05F13
HIMS05F16
HIMA05F9
—
—
HPMS05F9
HPMS05F13
HPMS05F16
HPMA05F9
—
—
250V
3 Pin - 12A
4,5 Pin - 9A
#16 AWG
Female, Right Angle
Male, Right Angle
Anodized aluminum, SST consult factory
PBT
PUR/PA
Brass, gold plate over palladium nickel
Environmental Specifications
Moisture Resistance
Operating Temperature
IP66 Suitability
-40°C to 85°C
Female, Straight
Male, Straight
2.4"
(61.0)
1.10"
(28)
3.1"
(78.7)
2.0"
(50.8)
1.06"
(27)
Male In-Line, Right Angle
Male In-Line, Straight
2.58"
(65.5)
1.10"
(28)
0.96"
(24.4)
7/8"-16 UN
7/8"-16 UN
Mechanical Specifications
Coupling Nut
Connector Shell
Connector Insert
Contacts
Male Connector
Straight
Electrical Specifications
Voltage Rating
Amperage
Male In-Line Connector
Cable Range
3.3"
(83.8)
2.0"
(50.8)
1.06"
(27)
7/8"-16 UN
0.96"
(24.4)
7/8"-16 UN
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-17
Micro-Quick® Control Connectors
Features and Benefits
Hard Gold over Palladium/
Nickel Contact Plating
High mating cycles and
longer contact life
Custom Knurled, Antivibration Coupling Nut
Prevents loosening under
harsh vibration conditions
Gated Strain Relief with
Graduated Window Sizes
Distributes force away from
contacts to protect terminations
Indicator Ring
Ensures proper mating
Resilient Base Metal
Maintains socket contact shape
O-Rings
Moisture protection
Features
Benefits
• Nickel plated brass coupling nuts and receptacle shells.
• Strong, resilient base metal ensures contacts maintain their shape
and continuity over time.
• Beryllium copper socket contacts.
• Cable resists nicks and abrasions and provides shielding when
braid is terminated.
• Standard #22 AWG cable 85% copper braid coverage.
• Black overmold and cable.
• Insulgrip connector body design.
• Cable assembly resists dirt and blends with environment giving a
clean look to the installation.
• Plating resists corrosion in high abuse environments.
• Ergonomic connector body has an industrial look.
Material Specifications
Insulator Materials
Contact Materials
Contact Plating
Overmold Material
Coupling Nut, Metallic
Coupling Nut, Nylon
Receptacle Shell
Nylon 6/6, White
Pins - Brass
Sockets - Beryllium copper
Hard gold over palladium/nickel
Glass filled polyurethane, Black
Nickel plated brass
Nylon 6/6, Black
Nickel plated brass
Cable
#22 AWG -
#18 AWG Strain Relief
#22 AWG #18 AWG -
PVC jacket (black)
PVC conductor insulation
Copper braid - 85% coverage
Stranding - 19/34
TPE jacket (black)
PVC conductor insulation
Stranding - 41/34
20 pounds min per UL2238
30 pounds min per UL 2238
Electrical Specifications
Environmental Specifications
Voltage Rating
Amperage
Moisture Protection
Ingress Protection
Operating Temperature
Contact Resistance
Isolation Resistance
300V DC/300V AC
#22 AWG - 2&3P=5A, 4&5P=4A, 6P=3A
#18 AWG - 2&3P=8A, 4P=6A, 5P=5A
≤ 5 mΩ
≥ 1000 MΩ
Corrosion Resistance
Vibration Resistance
Certifications
UL 2238 and UL50E, File No. E192071
I-18
UL Type 4, 4X, 12 and 13
IP66 Suitability
#22 AWG PVC cable: -20°C to 105° C
#18 AWG TPE cable: -40°C to 105° C
500 hours salt spray per MIL-STD-1344,
Method 1001
10 - 2,000 Hz @15g per MIL-STD-1344,
Method 2005
CSA Certified, C22.2 No. 182.3 and CSA C22.2 No. 94.2-07
®
Wiring Device-Kellems
www.hubbell-wiring.com
Micro-Quick® Control Connectors
Single Key 3 - 5 Pole Plugs
Choose the appropriate configuration from the Selector below.
Hubbell Logic Configurator
For example, catalog number MCMS1312 is derived as follows:
DEVICE
TYPE
MC = Plug, Female
MI = Plug, Male Inline
ME = Male/Female
Extension Cable
COUPLING NUT
MATERIAL
M = Metallic
N = Nylon
KEY
STYLE
BODY
STYLE
1 = Single
A = Right Angle
S = Straight
CONDUCTOR
TYPE
CABLE
LENGTH (m)
1 = #22 AWG PVC Cable
2 = #18 AWG TPE Cable*
**
2
4
5
POLES
3
4
5
*2 - 4 Pole Only
MC
M
1
S
3
**Replace with
Length
2
1
Note: Availability of specific items may vary. Consult factory for delivery. Consult the factory for additional cable lengths or cable types.
3 - 5 Pole Single Key Plugs
Catalog numbers using #22 AWG PVC cable are listed below. For #18 AWG TPE cable, change the conductor type per
the Hubbell Logic chart above.
Poles
Male Face Shown
Female - mirror
image
Female Plugs
Male In-Line Plugs
Male/Female
Extension Cables
Cable Length
Straight
Right Angle
Straight
Straight
3
6.56 ft (2m)
13.12 ft (4m)
16.40 ft (5m)
All other lengths
MCMS1312
MCMS1314
MCMS1315
MCMS131**
MCMA1312
MCMA1314
MCMA1315
MCMA131**
MIMS1312
MIMS1314
MIMS1315
MIMS131**
MEMS1312
MEMS1314
MEMS1315
MEMS131**
4
6.56 ft (2m)
13.12 ft (4m)
16.40 ft (5m)
All other lengths
MCMS1412
MCMS1414
MCMS1415
MCMS141**
MCMA1412
MCMA1414
MCMA1415
MCMA141**
MIMS1412
MIMS1414
MIMS1415
MIMS141**
MEMS1412
MEMS1414
MEMS1415
MEMS141**
5
6.56 ft (2m)
13.12 ft (4m)
16.40 ft (5m)
All other lengths
MCMS1512
MCMS1514
MCMS1515
MCMS151**
MCMA1512
MCMA1514
MCMA1515
MCMA151**
MIMS1512
MIMS1514
MIMS1515
MIMS151**
MEMS1512
MEMS1514
MEMS1515
MEMS151**
Note: Replace ** with length required in meters. For nylon coupling nuts, replace “M” with “N” per the ordering chart above.
Example: change MCMA1412 to MCNA1412.
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-19
Micro-Quick® Control Connectors
Single Key 3 - 5 Pole Plugs
Drawings (in/mm)
Straight Female Plug
Right Angle Female Plug
A
Right Male In-Line Plug
E
D
E
D
A
A
M12 x 1
Thread
B
B
B
C
M12 x 1
Thread
M12 x 1
Thread
C
C
A
0.59" (15.0)
A
0.59" (15.0)
B
1.44" (36.6)
B
1.44" (36.6)
A
0.59" (15.0)
C
2.75" (69.9)
C
2.75" (69.9)
B
1.83" (46.5)
D
0.67" (17.0)
D
0.67" (17.0)
C
2.75" (69.9)
E
1.15" (29.2)
E
1.38" (35.1)
Straight Male In-Line Plug
Extension Cable
B
A
A
A
M12 x 1
Thread
C
B
C
MALE
C
B
FEMALE
MALE
A
0.59" (15.0)
A
0.59" (15.0)
0.59" (15.0)
B
2.06" (52.3)
B
1.83" (46.5)
2.06" (52.3)
C
2.75" (69.9)
C
M12 x 1
Cable Diameters By Cable Type
Accessories
Number of
Conductors
Dust Caps
Closure caps protect plugs and receptacles when not in use. Thread is M12 x 1.
3
4
5
#22 AWG
PVC
#18 AWG
TPE
0.21" (5.3)
0.22" (5.7)
0.26" (6.6)
0.24" (6.1)
0.26" (6.6)
0.28" (7.1)
Catalog Number
MRCM1
Conductor Color Code
Contact
Number
1
2
3
4
5
3
Pole
4
Pole
5
Pole
Brown
Not Used
Blue
Black
Not Used
Brown
White
Blue
Black
Not Used
Brown
White
Blue
Black
Gray
MPCM1
Dimensions in Inches (mm)
I-20
®
Wiring Device-Kellems
www.hubbell-wiring.com
Micro-Quick® Control Connectors
Single Key 3 - 5 Pole Receptacles
Choose the appropriate configuration from the Selector below.
Hubbell Logic Configurator
For example, catalog number MRMS13314 is derived as follows:
DEVICE
TYPE
MB = Receptacle,
Male
MF = Receptacle,
Female Inverse
COUPLING NUT
MATERIAL
M = Metallic
KEY
STYLE
BODY
STYLE
S = Straight
POLES
1 = Single
3
4
5
CONDUCTOR
TYPE
3 = #22 AWG PVC
Discrete Wire
4 = #18 AWG PVC
Discrete Wire*
*3 - 4 Pole Only
MR
M
S
1
3
3
REAR
THREAD STYLE
14 = M14x1*
25 = ¼" NPT**
50 = ½" NPT*
*MB Style Only
**MF Style Only
14
Note: Availability of specific items may vary. Consult factory for delivery. Consult the factory for additional cable lengths or cable types.
3 - 5 Pole Single Key Receptacles- #22 AWG Discrete Wire*
Catalog numbers using #22 AWG PVC discrete wire are listed below. For #18 AWG PVC discrete wire, change the conductor type
per the Hubbell Logic chart above.
Poles
Male Face Shown
Female - mirror
image
Male Receptacle
Rear Thread Style
Female Inverse Receptacles
Rear Thread Style
M14 x 1
½" NPT
¼" NPT
MBMS13314
MBMS13350
MFMS13325
MBMS14314
MBMS14350
MFMS14325
MBMS15314
MBMS15350
MFMS15325
3
4
5
Note: *For #18 AWG discrete wire, replace the conductor type per Hubbell Logic chart above.
All receptacles available in 1ft. length standard. For additional lengths, please consult factory.
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-21
Micro-Quick® Control Connectors
Single Key 3 - 5 Pole Receptacles
Drawings (in/mm)
Male Receptacle
Rear Thread - M14x1
Male Receptacle
Rear Thread - ½" NPT
1.0"
(25.4)
Ø 0.63"
(16)
0.75"
(19.1)
0.87"
(22.1)
M12 x 1
Thread
0.29"
(7.4)
1.0"
(25.4)
.050" (1.3)
Max panel thickness
12"
(304.8)
M14 x 1
Thread
Ø 0.63"
(16)
Female Inverse Receptacle
Rear Thread - ¼" NPT
0.46"
(11.7)
0.62"
(15.8)
M12 x 1
Thread
.24" (6.1)
0.86"
(21.8)
Max panel thickness
½" NPT
Thread
12"
(304.8)
Panel Cutout
0.75"
(19.1)
0.85"
(21.6)
Panel Cutout
M12 x 1
Thread
.15" (3.8)
0.40"
(10.2)
Max panel thickness
¼" NPT
Thread
12"
(304.8)
0.56"
(14.2)
Panel Cutout
Conductor Color Code - Single Key
Accessories
Contact
Number
Dust Caps
Closure caps protect plugs and receptacles when not in use. Thread is M12 x 1.
1
2
3
4
5
3
Pole
4
Pole
5
Pole
Brown
Not Used
Blue
Black
Not Used
Brown
White
Blue
Black
Not Used
Brown
White
Blue
Black
Gray
Catalog Number
MRCM1
MPCM1
Dimensions in Inches (mm)
I-22
®
Wiring Device-Kellems
www.hubbell-wiring.com
Micro-Quick® Control Connectors
Dual Key 2 - 6 Pole Plugs
Choose the appropriate configuration from the Selector below.
Hubbell Logic Configurator
For example, catalog number MPMS2512 is derived as follows:
DEVICE
TYPE
MC = Plug, Female
MP = Plug, Male
MI = Plug, Male Inline
ME = Male/Female
Extension Cable
COUPLING NUT
MATERIAL
M = Metallic
N = Nylon
BODY
STYLE
A = Right Angle
S = Straight
KEY
STYLE
CONDUCTOR
TYPE
CABLE
LENGTH (m)
1 = #22 AWG PVC Cable
2 = #18 AWG TPE Cable*
**
2
4
5
POLES
2 = Dual
2
3
4
5
6
**Replace with
Length
*2 - 5 Pole Only
M
MP
2
S
5
2
1
Note: Availability of specific items may vary. Consult factory for delivery. Consult the factory for additional cable lengths or cable types.
2 - 6 Pole Dual Key Plugs
Catalog numbers using #22 AWG PVC cable are listed below. For #18 AWG TPE cable, change the conductor type per the
Hubbell Logic chart above.
Poles
Male Face Shown
Female - mirror
image
Female Plugs
Male/Female
Extension Cables
Male Plugs
Cable Length
Straight
Right Angle
Straight
Right Angle
In-Line Straight
Straight
2
6.56 ft (2m)
13.12 ft (4m)
16.40 ft (5m)
All other lengths
MCMS2212
MCMS2214
MCMS2215
MCMS221**
MCMA2212
MCMA2214
MCMA2215
MCMA221**
MPMS2212
MPMS2214
MPMS2215
MPMS221**
MPMA2212
MPMA2214
MPMA2215
MPMA221**
MIMS2212
MIMS2214
MIMS2215
MIMS221**
MEMS2212
MEMS2214
MEMS2215
MEMS221**
3
6.56 ft (2m)
13.12 ft (4m)
16.40 ft (5m)
All other lengths
MCMS2312
MCMS2314
MCMS2315
MCMS231**
MCMA2312
MCMA2314
MCMA2315
MCMA231**
MPMS2312
MPMS2314
MPMS2315
MPMS231**
MPMA2312
MPMA2314
MPMA2315
MPMA231**
MIMS2312
MIMS2314
MIMS2315
MIMS231**
MEMS2312
MEMS2314
MEMS2315
MEMS231**
4
6.56 ft (2m)
13.12 ft (4m)
16.40 ft (5m)
All other lengths
MCMS2412
MCMS2414
MCMS2415
MCMS241**
MCMA2412
MCMA2414
MCMA2415
MCMA241**
MPMS2412
MPMS2414
MPMS2415
MPMS241**
MPMA2412
MPMA2414
MPMA2415
MPMA241**
MIMS2412
MIMS2414
MIMS2415
MIMS241**
MEMS2412
MEMS2414
MEMS2415
MEMS241**
5
6.56 ft (2m)
13.12 ft (4m)
16.40 ft (5m)
All other lengths
MCMS2512
MCMS2514
MCMS2515
MCMS251**
MCMA2512
MCMA2514
MCMA2515
MCMA251**
MPMS2512
MPMS2514
MPMS2515
MPMS251**
MPMA2512
MPMA2514
MPMA2515
MPMA251**
MIMS2512
MIMS2514
MIMS2515
MIMS251**
MEMS2512
MEMS2514
MEMS2515
MEMS251**
6
6.56 ft (2m)
13.12 ft (4m)
16.40 ft (5m)
All other lengths
MCMS2612
MCMS2614
MCMS2615
MCMS261**
MCMA2612
MCMA2614
MCMA2615
MCMA261**
MPMS2612
MPMS2614
MPMS2615
MPMS261**
MPMA2612
MPMA2614
MPMA2615
MPMA261**
MIMS2612
MIMS2614
MIMS2615
MIMS261**
MEMS2612
MEMS2614
MEMS2615
MEMS261**
Note: Replace ** with length required in meters. For nylon coupling nuts, replace “M” with “N” per the ordering chart above.
Example: change MCMS2314 to MCNS2314.
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-23
Micro-Quick® Control Connectors
Dual Key 2 - 6 Pole Plugs
Straight Plug
Right Angle Plug
A
Right Angle Male In-Line Plug
E
D
A
1/2 - 20 UNF
Thread
A
B
1/2 - 20 UNF
Thread
B
E
D
B
1/2 - 20 UNF
Thread
C
C
C
MALE
FEMALE
A
0.59" (15.0)
0.59" (15.0)
A
0.59" (15.0)
MALE
FEMALE
B
1.44" (36.6)
1.44" (36.6)
B
1.44" (36.6)
A
0.59" (15.0)
0.59" (15.0)
C
2.75" (69.9)
2.75" (69.9)
C
2.75" (69.9)
B
1.83" (46.5)
1.83" (46.5)
D
0.67" (17.0)
0.67" (17.0)
D
0.67" (17.0)
C
2.75" (69.9)
2.75" (69.9)
E
1.15" (29.2)
1.15" (29.2)
E
1.38" (35.1)
Male In-Line Plug
Extension Cable
A
B
B
A
1/2 - 20 UNF
Thread
A
1/2 - 20 UNF Thread
B
1/2 - 20 UNF Thread
A
0.59" (15.0)
MALE
FEMALE
B
2.06" (52.3)
A
0.59" (15.0)
0.59" (15.0)
C
2.75" (69.9)
B
2.06" (52.3)
1.83" (46.5)
C
Conductor Color Code - Dual Key
Contact
Number
2
Pole
3
Pole
1
2
3
4
5
6
Brown Green
Blue
Red/Black
Red/White
Accessories
4
Pole
5
Pole
6
Pole
Red/Black
Red/White
Red
Green
Red/White
Red
Green
Red/Yellow
Red/Black
Red/White
Red
Green
Red/Yellow
Red/Black
Red/Blue
Dust Caps
Closure caps protect plugs and receptacles when not in use.
Key style is for dual with thread of ½"-20 UNF.
Catalog Number
MRCM2
Cable Diameters By Cable Type
Number of
Conductors
2
3
4
5
6
#22 AWG
PVC
#18 AWG
TPE
0.20" (5.1)
0.21" (5.3)
0.22" (5.7)
0.26" (6.7)
0.26" (6.5)
0.23" (5.8)
0.24" (6.09)
0.26" (6.6)
0.28" (7.1)
–
MPCM2
Dimensions in Inches (mm)
I-24
®
Wiring Device-Kellems
www.hubbell-wiring.com
Micro-Quick® Control Connectors
Dual Key 2 - 6 Pole Receptacles
Choose the appropriate configuration from the Selector below.
Hubbell Logic Configurator
For example, catalog number MRMS22325 is derived as follows:
DEVICE
TYPE
MR = Receptacle,
Female
MB = Receptacle,
Male
MF = Receptacle,
Female Inverse
COUPLING NUT
MATERIAL
M = Metallic
KEY
STYLE
BODY
STYLE
POLES
2 = Dual
S = Straight
2
3
4
5
6
CONDUCTOR
TYPE
REAR
THREAD STYLE
3 = #22 AWG PVC
Discrete Wire
4 = #18 AWG PVC
Discrete Wire*
25 = ¼" NPT*
50 = ½" NPT
*2 - 5 Pole Only
MR
M
2
S
2
*MF Style Only
25
3
Note: Availability of specific items may vary. Consult factory for delivery. Consult the factory for additional cable lengths or cable types.
Male Receptacle
Rear Thread Style
M14 X 1
Female Inverse Receptacles
Rear Thread Style
½" NPT
¼" NPT
2 - 6 Pole Dual Key Receptacles
Catalog numbers using #22 AWG PVC cable are listed below. For #18 AWG PVC discrete wire, change the conductor type per
the Hubbell Logic chart above.
Poles
Male Face Shown
Female - mirror
image
Female Receptacle
Rear Thread Style
Male Receptacle
Rear Thread Style
Female Inverse
Receptacles
¼" NPT
½" NPT
¼" NPT
½" NPT
¼" NPT
2
MRMS22325
MRMS22350
MBMS22325
MBMS22350
MFMS22325
3
MRMS23325
MRMS23350
MBMS23325
MBMS23350
MFMS23325
4
MRMS24325
MRMS24350
MBMS24325
MBMS24350
MFMS24325
5
MRMS25325
MRMS25350
MBMS25325
MBMS25350
MFMS25325
6
MRMS26325
MRMS26350
MBMS26325
MBMS26350
MFMS26325
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-25
Micro-Quick® Control Connectors
Dual Key 2 - 6 Pole Receptacles
Female Inverse Receptacle
¼" NPT Rear Thread
¼" NPT Rear Thread Receptacle
A
E
B
A
E
1/2 - 20 UNF
Thread
Max panel thickness
F
C
D
¼" NPT
Thread
G
Panel cutout
MALE
FEMALE
A
0.75" (19.1)
0.75" (19.1)
B
0.75" (19.1)
0.86" (21.8)
C
0.10" (2.5)
0.10" (2.5)
D
12.0" (304.8)
12.0" (304.8)
E
0.62" (15.8)
0.62" (15.8)
F
0.35" (8.9)
0.38" (9.7)
G
0.56" (14.2)
0.56" (14.2)
MALE
FEMALE
A
1.00" (25.4)
1.00" (25.4)
B
1.00" (25.4)
1.00" (25.4)
C
0.24" (6.10)
0.24" (6.10)
D
12.0" (304.8)
12.0" (304.8)
E
0.87" (22.1)
0.87" (22.1)
F
0.46" (11.7)
0.46" (11.7)
G
0.85" (21.6)
0.85" (21.6)
B
1/2 - 20 UNF
Thread
Max panel thickness
F
C
D
¼" NPT
Thread
G
A
0.75" (19.1)
B
0.86" (21.8)
C
0.15" (3.8)
D
12.0" (304.8)
E
0.62" (15.8)
F
0.40" (10.2)
G
0.56" (14.2)
Panel cutout
½" NPT Rear Thread Receptacle
A
E
1/2 - 20 UNF
Thread
B
C
F
½" NPT
Thread
D
G
Panel cutout
Accessories
Conductor Color Code - Dual Key
Contact
Number
2
Pole
3
Pole
1
2
3
4
5
6
Brown Green
Blue
Red/Black
Red/White
4
Pole
5
Pole
6
Pole
Red/Black
Red/White
Red
Green
Red/White
Red
Green
Red/Yellow
Red/Black
Red/White
Red
Green
Red/Yellow
Red/Black
Red/Blue
Dust Caps
Closure caps protect plugs and receptacles when not in use.
Key style is for dual with thread of ½"-20 UNF.
Catalog Number
MRCM2
MPCM2
Dimensions in Inches (mm)
I-26
®
Wiring Device-Kellems
www.hubbell-wiring.com
Micro-Quick® Control Connectors
Field Attachable Connectors - Screw Terminal Style
Precision Wire Funnels
Eliminate Stray Strands
Coupling Nut
Anodized Aluminum,
SST Option Consult Factory
Body
High Impact Design
Superior Contact Design
Utilizing High Performance
Gold Over Palladium Nickel Plating
Strain Relief
Protects Terminations
3 - 5 Pole Field Attachable Connectors
Poles
Male Face Shown
Female - mirror
image
Female Connector
Male In-Line Connector
Cable Range
Straight
Right Angle
Straight
Right Angle
3
.16"-.24" (4.1-6.1)
.24"-.32" (6.1-8.1)
MCMS23F7
MCMS23F9
MCMA23F7
MCMA23F9
MIMS23F7
MIMS23F9
MIMA23F7
MIMA23F9
4
.16"-.24" (4.1-6.1)
.24"-.32" (6.1-8.1)
MCMS14F7
MCMS14F9
MCMA14F7
MCMA14F9
MIMS14F7
MIMS14F9
MIMA14F7
MIMA14F9
5
.16"-.24" (4.1-6.1)
.24"-.32" (6.1-8.1)
MCMS15F7
MCMS15F9
MCMA15F7
MCMA15F9
MIMS15F7
MIMS15F9
MIMA15F7
MIMA15F9
Electrical Specifications
Voltage Rating
Amperage
Wire Size, Max
250V
4A
#18 AWG
Mechanical Specifications
Coupling Nut
Connector Shell
Connector Insert
Contacts
Female, Straight
1.38"
(35)
2.1"
(53.4)
0.98"
(24.9)
0.79"
(20)
0.81"
(20.5)
Nickel plated brass, SST consult factory
PBT
Nylon
Brass, gold plate over palladium nickel
Environmental Specifications
Moisture Resistance
Operating Temperature
Female, Right Angle
0.79"
(20)
0.58"
(14.7)
Male In-Line, Right Angle
IP66 Suitability
-40°C to 90°C
Male In-Line, Straight
1.61"
(40.9)
2.4"
(60.9)
0.79"
(20)
0.81"
(20.5)
0.79"
(20)
0.58"
(14.7)
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-27
Micro-Quick® Control Connectors
Field Attachable Connectors - IDC Style
Rugged, Nickel-plated Hardware
Excellent corrosion and abuse resistance
Allows field installation of control
connector. Insulation Displacement
Contacts do not require stripped
conductors, greatly speeding
installation.
Copper Alloy
Insulation displacement contacts
Wire Guide
For virtually toolless termination
Strain Relief Bushing
Protects terminations and provides IP66 ingress protection
Micro-Quick® IDC
Poles
Male Face Shown
Female - mirror
image
Female Connector
Male In-Line Connector
Cable Range
Wire Gauge
Straight
Right Angle
Straight
Right Angle
3
.16"-.21" (4.1-5.3)
.22"-.32" (5.6-8.1)
22 - 24
18 - 22
MCMS13IDC
MCMS13IDCL
MCMA13IDC
—
MIMS13IDC
MIMS13IDCL
MIMA13IDC
—
4
.16"-.21" (4.1-5.3)
.22"-.32" (5.6-8.1)
22 - 24
18 - 22
MCMS14IDC
MCMS14IDCL
MCMA14IDC
—
MIMS14IDC
MIMS14IDCL
MIMA14IDC
—
Material Specifications
MCMS13IDC
MCMA13IDC
Housing
Wire Guide
Strain Relief Bushing
Contact Materials
Contact Plating
Coupling Nut
O-ring
Cable Compression Nut
Polyester Elastomer, Black
Nylon 6/6, Gray
Neoprene, Black
Copper Alloy
Tin over Nickel
Zinc Alloy with Nickel Plating
Neoprene, Black
Zinc Alloy with Nickel Plating
Electrical Specifications
MCMS13IDCL
MIMS13IDC
Catalog Suffix
IDC
IDCL
Voltage Rating
Wire Range
32V AC/DC
#22 AWG max.,
#24 AWG min.
.160" to .211"
(4.1 to 5.3 mm)
3A
< 5 mΩ
50V AC/DC
#18 AWG max.,
#22 AWG min.
.22" to .32"
(5.6 to 8.1 mm)
6A
< 5 mΩ
Cable Diameters
Amperage
Contact Res.
Environmental Specifications
Ingress Protection
Operating Temperature
MIMS13IDCL
Dimensions in Inches (mm)
I-28
IP66 Suitability
-20°C to 110°C
MIMA13IDC
®
Wiring Device-Kellems
www.hubbell-wiring.com
Nano-Quick® Control Connectors
Features and Benefits
Gated Strain Relief with Graduated Window Sizes
Improved Flexibility and Strength Protects Wire
Terminations Superior arc of bend control
Hard Gold Over Palladium Nickel Contact Plating
Superior Conductivity, Extended Contact Life
Beryllium Copper Socket Contacts
Ensures contacts maintain their shape
and continuity
O-Rings
Moisture Protection
Anti-Vibration Coupling Nut
Prevents coupling nut from loosening under
harsh vibration conditions
Features
Benefits
• Nickel plated brass coupling nuts and receptacle shells.
• Black overmold and cable.
• Insulgrip connector body design.
• UL Listed cable assemblies and receptacles.
• Plating resists corrosion in high abuse environments.
• Strong, resilient base metal ensures contacts maintain their shape
and continuity over time.
• Ergonomic connector body has an industrial look.
• Third party certified for electrical, mechanical and environmental
performance.
• Cable assembly resists dirt and blends with environment
giving a clean look to the installation.
Material Specifications
Insulator Materials
Contact Materials
Contact Plating
Overmold Material
Coupling Nut, Metallic
Receptacle Shell
Nylon 6/6, White
Pins - Brass, Sockets
Sockets - Beryllium copper
Hard gold over palladium/nickel
Polyurethane, Black
Nickel plated brass
Nickel plated brass
Cable
Strain Relief
#24 AWG - PVC jacket, Black, PVC conductor
insulation, Copper braid - 85% coverage,
Stranding 19/36
#24 AWG - TPE jacket, Black, PVC conductor
insulation, Stranding - 19/36
20 pounds min per UL 2238
Electrical Specifications
Environmental Specifications
Voltage Rating
Amperage
Contact Resistance
Isolation Resistance
Moisture Protection
Ingress Protection
Operating Temperature
125V AC/75V DC
3&4P=4A
≤ 5 mΩ
≥ 1000 MΩ
Corrosion Resistance
Vibration Resistance
Certifications
UL 2238 and UL50E, File No. E192071
www.hubbell-wiring.com
UL Type 4, 4X, 12 and 13
IP66 Suitability
PVC Cable: -20° to 105° C
TPE Cable: -40°C to 105° C
500 hours salt spray per
MIL-STD-1344, Method 1001
10 - 2,000 Hz @15g per MIL-STD1344,
Method 2005
CSA Certified, C22.2 No. 182.3 and CSA C22.2 No. 94.2-07
®
Wiring Device-Kellems
I-29
Nano-Quick® Control Connectors
3 - 4 Pole Plugs and Receptacles
Choose the appropriate configuration from the Selector below.
Hubbell Logic Configurator
For example, catalog number NCTA3105 is derived as follows:
DEVICE
TYPE
NC = Plug,
Female
RETENTION
STYLE
T = Threaded,
Locking
S = Snap On
BODY
STYLE
POLES
CABLE
TYPE
CABLE
LENGTH (m)
A = Right Angle
S = Straight
3
4
1 = #24 AWG PVC Cable
2 = #24 AWG TPE Cable
**
02
05
**Replace with Length
NC
T
A
1
3
05
Note: Availability of specific items may vary. Consult factory for delivery. Use this chart to build plugs to meet any application need. Consult the factory for
additional cable lengths or cable types.
3 - 4 Pole Female Plugs
Catalog numbers using #24 AWG PVC cable are listed below. For #24 AWG TPE cable, change the cable type per the Hubbell
Logic chart above.
Poles
Female Face
Shown
Threaded, Locking
Snap Together
Cable Length
Straight
Right Angle
Straight
Right Angle
3
6.56 ft (2m)
16.40 ft (5m)
All other lengths
NCTS3102
NCTS3105
NCTS31**
NCTA3102
NCTA3105
NCTA31**
NCSS3102
NCSS3105
NCSS31**
NCSA3102
NCSA3105
NCSA31**
4
6.56 ft (2m)
16.40 ft (5m)
All other lengths
NCTS4102
NCTS4105
NCTS41**
NCTA4102
NCTA4105
NCTA41**
NCSS4102
NCSS4105
NCSS41**
NCSA4102
NCSA4105
NCSA41**
Note: Replace ** with length required in feet. For snap on retention style, replace “T” with “S” per the ordering chart above.
Example: change NCTA3105 to NCSA3105.
Hubbell Logic Configurator
For example, Catalog Number NBCS3D is derived as follows:
DEVICE
TYPE
NB = Receptacle,
Male
NB
BODY
STYLE
RETENTION
STYLE
C = Combination
S = Straight
C
S
CONDUCTOR
TYPE
POLES
3
4
D = 0.25m #24 AWG
discrete wire
3
D
3 - 4 Pole Male Receptacles
Poles
Male Face
Shown
3
Male Receptacle
Rear Thread Style
M8 x 1
Poles
NBCS3D
4
Male Face
Shown
Male Receptacle
Rear Thread Style
M8 x 1
NBCS4D
Note: R
eplace ** with length required in feet.
I-30
®
Wiring Device-Kellems
www.hubbell-wiring.com
Nano-Quick® Control Connectors
3 - 4 Pole Plugs and Receptacles
Straight Female Locking Plug
Right Angle Female Locking Plug
A
A
D
M8 x 1
Thread
E
B
A
0.38" (9.7)
B
1.51" (38.4)
C
2.75" (69.9)
B
M8 x 1
Thread
C
C
Straight Female Snap Together Plug
A2
A1
A2
0.38" (9.7)
A1
0.39" (9.9)
A2
0.22" (5.6)
A2
0.38" (9.7)
B
1.50" (38.1)
A3
0.22" (5.6)
C
2.75" (69.9)
B
1.04" (26.4)
C
2.75" (69.9)
D
0.79" (20.1)
C
Cable Diameters By Cable Type
Number of
Conductors
3
4
F
M8 x 1
Thread
Panel cutout
0.78" (19.8)
E
0.34" (8.6)
Max panel thickness
D
D
B
A3
M8 x 1
Thread
C
2.75" (69.9)
A1
Male Combination Receptacle
E
1.04" (26.4)
C
D
C
B
0.39" (9.9)
B
Right Angle Female Snap Together Plug
A1
B
A
#24 AWG
PVC
#24 AWG
TPE
0.21" (5.3)
0.21" (5.3)
0.21" (5.3)
0.21" (5.3)
Conductor Color Code
A
0.31" (7.9)
B
0.63" (16.0)
C
12.0" (304.8)
D
0.35" (8.8)
E
0.80" (2.0)
F
0.59" (15.0)
Contact
Number
1
2
3
4
3
Pole
4
Pole
Brown
Not Used
Blue
Black
Brown
White
Blue
Black
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-31
Nano-Quick® Control Connectors
Field Attachable Connectors - IDC Style
Rugged, Nickel-plated Hardware
Excellent corrosion and abuse resistance
Allows field installation of control
connector. Insulation Displacement
Contacts do not require stripped
conductors, greatly speeding
installation.
Copper Alloy
Insulation displacement contacts
Wire Guide
For virtually toolless termination
Strain Relief Bushing
Protects terminations and provides IP66 ingress protection
Nano-Quick® IDC
Male Face Shown
Female - mirror
image
Female Connector
Male Connector
Cable Range
Wire Gauge
Straight
Straight
3
.13"-.21" (3.3-5.3)
22 - 24
NCTS13IDC
NITS13IDC
4
.13"-.21" (3.3-5.3)
22 - 24
NCTS14IDC
NITS14IDC
Poles
Material Specifications
NCTS13IDC
Housing
Wire Guide
Strain Relief Bushing
Contact Materials
Contact Plating
Coupling Nut
O-ring
Cable Compression Nut
Polyester Elasomer, Black
Nylon 6/6, Gray
Neoprene, Black
Copper Alloy
Tin over Nickel
Zinc Alloy with Nickel Plating
Neoprene, Black
Zinc Alloy with Nickel Plating
Electrical Specifications
NITS13IDC
Voltage Rating
Wire Range
Cable Diameters
Amperage
Contact Resistance
32VAC/DC
#22 AWG max., #24 AWG min.
.13" to .21" (3.3 to 5.3 mm)
3A
< 5 mΩ
Environmental Specifications
Ingress Protection
Operating Temperature
IP66 Suitability
-20°C to 110°C
Dimensions in Inches (mm)
I-32
®
Wiring Device-Kellems
www.hubbell-wiring.com
Signal-Quick® Sensor Mounting Accessories
Cushioned Sensor Mounts
Sensor Mounts
Install tubular proximity sensors with a Cushioned Sensor Mount and protect against over-travel damage.
Reduces replacement expenses and downtime. Hubbell’s Cushioned Sensor Mounts feature:
• Spring-loaded housing eliminates impact damage.
• Reduces downtime and replacement expenses.
• Reduces spare sensor inventories.
• Shielded and non-shielded end caps eliminate abrasion damage.
• Block style or threaded housing designs.
• Anodized aluminum or stainless steel.
When something out of the ordinary happens or targets over-travel, the sensor simply retracts to avoid damage.
The sensor returns to its original position and the equipment continues to operate.
Material Specifications
Material:
Anodized aluminum housing
Zinc-plated brass jam nuts
CSM12LP is all Stainless Steel
H
E
A
B
C
Threaded Style
Threaded Style
Catalog Number
A
B
C
E
H
CSM8
M8 x 1
M16 x 1.5
0.12" (3.1)
0.87" (22.1)
0.87" (22.1)
CSM12LP
M12 x 1
M18 x 1
0.16" (4.1)
0.95" (24)
0.83" (21.1)
CSM18
M18 x 1
M30 x 1.5
0.20" (5.1)
1.41" (35.8)
1.17" (29.7)
CSM30
M30 x 1.5
M47 x 1.5
0.20" (5.1)
2.01" (51)
1.47" (37.3)
L
M
C
K
H
E
B
A
Block Style
Block Style
Catalog Number
A
B
C
E
H
K
L
M
BCSM8
M8 x 1
0.75" (19)
0.37" (9.5)
0.62" (15.8)
0.87" (22.1)
0.72" (18.4)
1.0" (25.4)
0.14" (3.6)
BCSM12
M12 x 1
0.75" (19)
0.37" (9.5)
1.0" (25.4)
0.87" (22.1)
0.98" (24.8)
1.5" (38.1)
0.20" (5.2)
BCSM18
M18 x 1
1.0" (25.4)
0.50" (12.7)
1.25" (31.7)
1.17" (29.7)
1.21" (30.7)
1.5" (38.1)
0.18" (4.6)
BCSM30
M30 x 1.5
1.38" (34.9)
0.68" (17.5)
2.0" (50.8)
1.47" (37.4)
2.03" (51.5)
2.5" (63.5)
0.26" (6.7)
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-33
Signal-Quick® Sensor Mounting Accessories
Flat and Right Angle Adjustable Brackets
Sensor Mounting Brackets
Eliminate design time and fabrication expense. Choose the Hubbell Angle
Bracket or Flat Bracket to mount any tubular proximity sensor.
• Fixed mounting patterns or multi-slotted
for positioning versatility.
• Industry standard mounting footprints.
• Rapid installation.
• Immediately available from stock.
• Cost savings over “make your own”.
A
B
Material Specifications
D
Material:
F
E
Stainless Steel
G
C
Flat Brackets
Catalog Number
A
B
C
D
E
F
G
Thickness
FB12
FB18
FB30
0.48" (12.1)
0.72" (18.2)
1.19" (30.1)
1.95" (49.6)
2.27" (57.6)
3.42" (86.9)
1.25" (31.8)
1.38" (34.9)
2.0" (50.8)
0.86" (21.8)
1.36" (34.6)
2.05" (52)
0.47" (11.9)
0.22" (5.56)
0.37" (9.40)
0.22" (5.54)
0.24" (6.05)
0.31" (7.94)
0.75" (19.1)
1.0" (25.4)
1.25" (31.8)
0.12" (3.02)
0.12" (3.02)
0.12" (3.02)
F
H
I
Material Specifications
G
Stainless steel
Zinc-plated steel (AAB47)
90-
K
A
Material:
B
D
E
C
Adjustable Angle Brackets
J
Catalog
Number
A
B
C
D
E
F
G
H
I
J
K
AAB08
AAB12
AAB18
AAB22
AAB30
1.0" (25.4)
1.5" (38.1)
2.0" (50.8)
2.0" (50.8)
2.5" (63.5)
1.25" (31.8)
1.37" (34.8)
1.37" (34.8)
1.37" (34.8)
1.75" (44.5)
1.25" (31.8)
1.5" (38.1)
1.75" (44.5)
1.75" (44.5)
2.25" (57.2)
0.34" (8.74)
0.50" (12.7)
0.72" (18.3)
0.88" (22.2)
1.19" (30.1)
0.31 (7.92)
0.55" (13.9)
0.75" (19.1)
0.69" (17.4)
0.91" (23)
0.22" (5.54)
0.22" (5.54)
0.22" (5.54)
0.22" (5.54)
0.28" (7.11)
0.62" (15.9)
0.75" (19.1)
1.0" (25.4)
1.0" (25.4)
1.37" (34.8)
0.46" (11.9)
0.56" (14.3)
0.56" (14.3)
0.56" (14.3)
0.81" (20.6)
0.28" (7.14)
0.31" (7.92)
0.31" (7.92)
0.31" (7.92)
0.41" (10.3)
0.07" (1.78)
0.07" (1.78)
0.07" (1.78)
0.07" (1.78)
0.09" (2.29)
0.38" (9.53)
0.50" (12.7)
0.63" (15.9)
0.63" (15.9)
0.75" (19.1)
C
F
I
Material Specifications
B
G
Material:
A
E
D
Angle Brackets
Stainless Steel
H
Catalog
Number
A
B
C
D
E
F
G
H
I
AB12
AB18
AB30
1.16"" (29.3)
1.47" (37.3)
2.13" (54.0)
1.0"" (25.4)
1.0" (25.4)
1.50" (38.1)
1.25" (31.8)
1.38" (34.9)
2.00" (50.8)
0.48" (12.1)
0.48" (12.1)
1.19" (30.1)
0.53" (13.5)
0.53" (13.5)
1.13" (28.7)
0.53" (13.5)
0.78" (19.8)
1.13" (28.7)
0.75" (19.1)
1.0" (25.4)
1.25" (31.8)
0.12" (3.02)
1.12" (3.02)
0.12" (3.02)
0.22" (5.6)
0.24" (6.0)
0.31" (7.9)
Dimensions in Inches (mm)
I-34
®
Wiring Device-Kellems
www.hubbell-wiring.com
Signal-Quick® Sensor Mounting Accessories
End Caps and Block Mounts
End Caps
• Use alone or with Cushioned Sensor Mount.
• Beveled edge deflects lateral impacts.
• Reduces and or eliminates abrasion damage.
• Reduces downtime and sensor replacement expenses.
Material:
Non-Shielded
Shielded
Specifications
Delrin (Non-Shielded)
Glass-filled Nylon (Shielded)
Polypropylene (EC30)
A
30°
30°
B
D
B
D
C
C
End Caps
E
A
Shielded
Style
A
B
C
D
E
Thread
EC08
EC12
EC18
EC30
8mm
12mm
18mm
30mm
0.21" (5.28)
0.25" (6.35)
0.33" (8.38)
0.30" (7.62)
0.60" (15.2)
0.96" (24.4)
1.23" (31.3)
1.72" (43.7)
0.015" (.38)
0.015" (.38)
0.03" (.76)
0.03" (.76)
0.25" (6.45)
0.45" (11.4)
0.73" (17.5)
1.13" (28.6)
N/A
N/A
N/A
N/A
M8 x 1
M12 x 1
M18 x 1
M30 x 1
8mm
12mm
18mm
30mm
0.20" (5.08)
0.25" (6.35)
0.33" (8.38)
0.31" (7.87)
0.57" (14.5)
0.90" (22.9)
1.34" (34.0)
1.75" (44.5)
0.015" (.38)
0.03" (.76)
0.025" (.64)
0.04" (1.02)
0.25" (6.45)
0.45" (11.4)
0.67" (17.0)
1.15" (29.2)
0.37" (9.50)
0.68" (17.3)
0.70" (17.8)
0.90" (22.9)
M8 x 2
M12 x 1
M18 x 1
M30 x 1
Non-Shielded
EC08N
EC12N
EC18N
EC30N
Note: The wear surface thickness (Dimension C) does not reduce a sensor’s sensing range, but will consume an equal amount of the gap required between the sensor and target.
Block Mounts
Bond to sensor face with any epoxy.
• Use when threads are inaccessible.
• Reduces and/or eliminates abrasion damage.
• Reduces downtime and sensor replacement expenses.
Specifications
Material:
Glass-filled Nylon
Anodized aluminum
Metallic
Nylon
A
D
½D
A
E
E
D
C
C
½C
½C
F
F
B
B
Block Mounts
Metallic
Style
A
B
C
D
E
F
BM08M
BM12M
BM18M
BM30M
8mm
12mm
18mm
30mm
0.32" (8.05)
0.48" (12.1)
0.71" (18.1)
1.19" (30.1)
0.62" (15.8)
1.0" (25.4)
1.25" (31.7)
2.0" (50.8)
1.0" (25.4)
1.5" (38.1)
1.5" (38.1)
2.5" (63.5)
0.75" (19.0)
0.75" (19.0)
1.0" (25.4)
1.38" (34.9)
0.72" (18.4)
0.98" (24.9)
1.21" (30.7)
2.03" (51.5)
0.14" (3.58)
0.20" (5.08)
0.18" (4.58)
0.26" (6.73)
8mm
12mm
16mm
18mm
20mm
22mm
30mm
0.32" (8.05)
0.48" (12.1)
0.63" (16.1)
0.71" (18.1)
0.79" (20.1)
0.87" (22.1)
1.18" (30.1)
1.06" (27)
1.26" (32)
1.42" (36)
1.42" (36)
1.77" (45)
1.77" (45)
2.17" (55)
0.63" (16)
0.79" (20)
1.02" (26)
1.02" (26)
1.18" (30)
1.18" (30)
1.50" (38)
0.47" (12)
0.47" (12)
0.47" (12)
0.47" (12)
0.59" (15)
0.59" (15)
0.71" (18)
0.67" (17)
0.87" (22)
1.02" (26)
1.02" (26)
1.26" (32)
1.26" (32)
1.65" (42)
0.18" (4.5)
0.18" (4.5)
0.18" (4.5)
0.18" (4.5)
0.22" (5.5)
0.22" (5.5)
0.22" (5.5)
Nylon
BM08N
BM12N
BM16N
BM18N
BM20N
BM22N
BM30N
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-35
Signal-Quick® Sensor Mounting Accessories
Universal Aiming Brackets
Universal Aiming Brackets
Attach limit switch style (30mm threaded base) or threaded barrel photoelectric and ultrasonic sensors.
Achieve secure mounting quickly and with ease.
•
•
•
•
Swivel action for aiming simplicity.
Durable glass-filled nylon construction.
Regular or extended base models.
Sizes for 12, 18 and 30mm threaded sensors.
Material Specifications
Material:
Glass-filled Nylon
Bracket, Standard
Bracket, Extended
A
0.79"
(20.1)
A
0.79"
(20.1)
0.80"
(20.3)
0.80"
(20.3)
2.25"
(57.2)
3.38"
(85.9)
1.15"
(29.2)
2.0"
(50.8)
0.81"
(20.6)
1.12"
(28.6)
2.6"
(66)
2.28"
(57.9)
Ø 0.28"
(7.08)
0.81"
(20.6)
1.12"
(28.6)
2.0"
(50.8)
2.6"
(66.0)
Ø 0.28"
(7.08)
Universal Aiming Brackets
Catalog Number
Style
Description
Thread
UB12
UB12E
UB18
UB18E
UB30
UB30E
12mm
12mm
18mm
18mm
30mm
30mm
Bracket
Bracket, Extended Base
Bracket
Bracket, Extended Base
Bracket
Bracket, Extended Base
M12 x 1
M12 x 1
M18 x 1
M18 x 1
M30 x 1.5
M30 x 1.5
Dimensions in Inches (mm)
I-36
®
Wiring Device-Kellems
www.hubbell-wiring.com
CableTrak® Hose and Cable Carrier System
Assembly and Installation
The design of CableTrak carriers provides easy access to components during installation and repair. The track’s flip top design
allows the installer to lay cable and hose components directly into the track instead of pulling them through the length of the
track. Hubbell CableTrak carriers can be ordered as assembled kits with brackets or by the foot without brackets. The final
length of the track is easily customized by adding or removing sections of track or individual links with a flat head screwdriver.
CableTrak® Installation
1. Unlock Tab.
2. Locking tabs secure the retaining bar into place.
To unlock tabs, slide a flat head screwdriver
under the tab and release it with a twisting motion.
Access/Install Cables and Hoses
3. Easy access is important, especially for
pre-assembled cable/hose sets involving
large O.D. plugs, receptacles, and couplings.
4. Lock Tab.
5. To re-secure retaining bars, engage the hinge
and snap the locking tab into place.
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-37
CableTrak® Hose and Cable Carrier System
CableTrak® Kit With and Without Brackets
K
TRAVEL
C
End Mounting:
Track travel length = Machine travel length.
B
R
V
W
H
O
M
P
CableTrak® Kit with Brackets
Catalog Number
Track
Length
(ft)
W
Inner
Width
H
Inner
Height
A Max
Hose/Cab
O.D.
B Max
Component V Outer
Width
Width
O Outer
Height
R Bend
Radius
B Bend
Height
K
C
Min Brkt
Clearance to Bend
M
Brkt to
Pivot
P
Pitch
L*
Curve
Length (ft)
HCT10114K**
4.0'
0.59"
0.75"
HCT10219K**
4.0'
1.00"
0.75"
0.286"
0.531"
1.03"
1.00"
1.44"
3.86"
2.00"
5.68"
1.33"
1.250"
1.000'
0.382"
0.900"
1.44"
1.00"
1.91"
4.82"
2.00"
5.41"
1.33"
1.250"
1.000'
HCT16119K
4.0'
1.50"
HCT16134K
4.5'
1.50"
1.00"
0.382"
1.350"
2.12"
1.62"
1.91"
5.44"
3.00"
5.72"
1.19"
1.812"
1.000'
1.00"
0.688"
1.350"
2.12"
1.62"
3.44"
8.50"
3.00"
7.85"
1.19"
1.812"
HCT16219K
4.0'
1.500'
2.28"
1.00"
0.328"
2.052"
2.91"
1.62"
1.91"
5.44"
3.00"
5.72"
1.19"
1.812"
HCT16234K
1.000'
4.5'
2.28"
1.00"
0.688"
2.052"
2.91"
1.62"
3.44"
8.50"
3.00"
7.85"
1.19"
1.812"
1.500'
HCT16334K
4.5'
3.08"
1.00"
0.688"
2.772"
3.70"
1.62"
3.44"
8.50"
3.00"
7.85"
1.19"
1.812"
1.500'
HCT16434K
4.5'
4.06"
1.00"
0.688"
3.654"
4.69"
1.62"
3.44"
8.50"
3.00"
7.85"
1.19"
1.812"
1.500'
HCT25134K
4.5'
2.60"
1.75"
0.680"
2.340"
3.70"
2.50"
3.40"
9.30"
3.00"
8.31"
1.75"
2.500"
1.500'
HCT25234K
4.5'
4.25"
1.75"
0.680"
3.825"
5.36"
2.50"
3.40"
9.30"
3.00"
8.31"
1.75"
2.500"
1.500'
HCT25247K
5.0'
4.25"
1.75"
0.956"
3.825"
5.36"
2.50"
4.78"
12.06"
3.00"
10.52"
1.75"
2.500"
2.000'
HCT25347K
5.0'
6.60"
1.75"
0.956"
5.940"
7.70"
2.50"
4.78"
12.06"
3.00"
10.52"
1.75"
2.500"
2.000'
B Max
Component V Outer
Width
Width
O Outer
Height
R Bend
Radius
B Bend
Height
C
P
Clearance Pitch
L*
Curve
Length (ft)
1.000'
CableTrak® Kit without Brackets
Catalog Number
Track
Length
(ft)
W
Inner
Width
H
Inner
Height
A Max
Hose/Cab
O.D.
HCT101141**
1.0'
0.59"
0.75"
0.286"
0.531"
1.03"
1.00"
1.44"
3.86"
2.00"
1.250"
HCT102191**
1.0'
1.00"
0.75"
0.382"
0.900"
1.44"
1.00"
1.91"
4.82"
2.00"
1.250"
1.000'
HCT161191
1.0'
1.50"
1.00"
0.382"
1.350"
2.12"
1.62"
1.91"
5.44"
3.00"
1.812"
1.000'
HCT161341
1.0'
1.50"
1.00"
0.688"
1.350"
2.12"
1.62"
3.44"
8.50"
3.00"
1.812"
1.500'
HCT162191
1.0'
2.28"
1.00"
0.328"
2.052"
2.91"
1.62"
1.91"
5.44"
3.00"
1.812"
1.000'
HCT162341
1.0'
2.28"
1.00"
0.688"
2.052"
2.91"
1.62"
3.44"
8.50"
3.00"
1.812"
1.500'
HCT163341
1.0'
3.08"
1.00"
0.688"
2.772"
3.70"
1.62"
3.44"
8.50"
3.00"
1.812"
1.500'
HCT164341
1.0'
4.06"
1.00"
0.688"
3.654"
4.69"
1.62"
3.44"
8.50"
3.00"
1.812"
1.500'
HCT251341
1.0'
2.60"
1.75"
0.680"
2.340"
3.70"
2.50"
3.40"
9.30"
3.00"
2.500"
1.500'
HCT252341
1.0'
4.25"
1.75"
0.680"
3.825"
5.36"
2.50"
3.40"
9.30"
3.00"
2.500"
1.500'
HCT252471
1.0'
4.25"
1.75"
0.956"
3.825"
5.36"
2.50"
4.78"
12.06"
3.00"
2.500"
2.000'
HCT253471
1.0'
6.60"
1.75"
0.956"
5.940"
7.70"
2.50"
4.78"
12.06"
3.00"
2.500"
2.000'
Note: *L = Minimum length in feet to form CableTrak curve.
**These models do not have a flip top design and do not accept separators due to their small size.
Dimensions in Inches (mm)
I-38
®
Wiring Device-Kellems
www.hubbell-wiring.com
CableTrak® Hose and Cable Carrier System
Accessories
Center Mounting: Mounting the fixed
track end in the center of the machine travel
allows the track to travel beyond the fixed end.
Center mounting effectively doubles the travel
distance of the track requiring half the track
length of an end mounted application.
Track Travel of BASIC KIT (C) = 3 ft.
EXTENDERS (D)
Track Travel with EXTENDERS (D) when
inserted increases travel by 1 ft.
Center Mount Travel = 2 x SUM of KITS
SUM OF KITS
SUM OF KITS
Window
Opening
A
B
Fixed Point End/Center Mounting
Calculating
Center Mount (Stationary bracket mounted in center of travel range): Track Length = (MT/2) + L
End Mount (Stationary bracket mounted off center of travel range): Track Length = (MT/2) + L + offset from center in feet
MT = Total machine travel distance in feet
L = Length of track taken up by the bend radius
Customizing Track Length
Hubbell CableTrak is easily customized by adding or subtracting links to the track. CableTrak kits provide 4 to 5 feet of track with brackets
pre-installed. Track length can be increased by installing the required number of extenders to reach the required length. To further tune the
length of track, individual links can be added or removed. To determine the number of links to add or remove, divide the length in inches to
be added or subtracted by the pitch of the track and round up.
CableTrak® Accessories
Bracket Kits
For Use With
A
B
C
D
E
F
G
H
HCTBK101
HCT101 Series
.40" (10.2)
.81" (20.6)
.47" (12.0)
.94" (23.9)
–
–
–
–
HCTBK102
HCT102 Series
.44" (11.2)
1.22" (31.0)
.44" (11.2)
1.35" (34.3)
–
–
–
–
HCTBK161
HCT161 Series
.99" (25.2)
1.97" (50.1)
.87" (22.1)
1.84" (46.7)
1.19" (30.2)
.281" (7.1)
.75" (19.1)
.81" (20.6)
HCTBK162
HCT162 Series
1.78" (45.2)
2.75" (69.9)
1.65" (41.9)
2.63" (66.8)
1.19" (30.2)
.281" (7.1)
.75" (19.1)
.81" (20.6)
HCTBK163
HCT163 Series
2.57" (65.3)
3.55" (90.2)
2.44" (62.0)
3.42" (86.9)
1.19" (30.2)
.281" (7.1)
.75" (19.1)
.81" (20.6)
HCTBK164
HCT164 Series
3.56" (90.4)
4.53" (115.1)
3.47" (88.1)
4.41" (112.0)
1.19" (30.2)
.281" (7.1)
.75" (19.1)
.81" (20.6)
HCTBK251
HCT251 Series
2.08" (52.8)
3.21" (81.5)
1.80" (45.7)
3.03" (77.0)
1.75" (44.5)
.344" (8.7)
1.00" (25.4)
1.25" (31.8)
HCTBK252
HCT252 Series
3.74" (95.0)
4.87" (123.7) 3.46" (87.9)
4.69" (119.1)
1.75" (44.5)
.344" (8.7)
1.00" (25.4)
1.25" (31.8)
1.00" (25.4)
1.25" (31.8)
HCTBK253
HCT253 Series
6.08" (154.4) 7.21" (183.1)
5.80" (147.3)
7.03" (178.6)
1.75" (44.5)
.344" (8.7)
Separators
For Use With
A
B
C
D
E
F
HCTSP16PK12 HCT16 Series
1.24" (31.5)
.82" (20.8)
.94" (23.9)
.27" (6.9)
.14" (3.6)
.50" (12.7)
HCTSP25PK12 HCT25 Series
2.03" (51.6)
1.00" (25.4)
1.19" (30.2)
.35" (8.9)
.15" (3.8)
.62" (15.8)
HCTBK101 – Brackets
HCTBK102 – Brackets
.22"
(5.59)
.578"
(14.68)
.578"
(14.68)
1.33"
(33.78)
C
D
Female
.578"
(14.68)
1.33"
(33.78)
1.02"
(25.91)
1.02"
(25.91)
1.02"
(25.91)
.22"
(5.59)
.22"
(5.59)
.22"
(5.59)
1.33"
(33.78)
.22"
(5.59)
A
B
Male
HCTBK161 – HCTGK253 Brackets
.22"
(5.59)
C
.40"
(10.16)
Female
D
.22"
(5.59)
.578"
(14.68)
.22"
(5.59)
1.33"
(33.78)
1.02"
(25.91)
G
H
Male
G
E
C
D
Female
B
F
H
E
A
B
A
.40"
(10.16)
F
Male
Separators
A
D
E
C
B
F
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-39
CableTrak® Hose and Cable Carrier System
Mounting Options and Specifications
Horizontal Travel
Fixed
End
Fixed
End
Combination
Horizontal & Vertical Travel
Opposed Travel
Fixed
Ends
Fixed
End
Vertical Travel
Curve Up
Curve Down
Back-Up
Plate
Back-Up
Surface
Fixed
End
Fixed
End
Back-Up
Surface
Back-Up
Plate
Specifications
Material
Operating Temperature
Maximum Operating Speed
Maximum Unsupported
Travel Distance
Applications
Fiberglass reinforced nylon.
Continuous +20°F to +100°F (-7°C to 38°C).
Intermittent* -40°F to +220°F (-40°C to 104°C).
600 FPM (feet per minute), 180 MPM (meters per minute).
Operating speed is based on short lengths that are self supported (up to 9ft.).
HCT16 Series without sag 9 ft. (2.8 m) with sag 10.5 ft. (3.2 m).
HCT25 Series without sag 13.5 ft. (4.1 m) with sag 17 ft. (5.2 m).
Machine tool, robotic automation, material handling.
Note: *Intermittent refers to the operating of the product outside the normal (continuous operating) temperature range momentarily before returning back to the normal range.
I-40
®
Wiring Device-Kellems
www.hubbell-wiring.com
DIN Rail Utility Box
Power and Data
Complete Units and Component Parts
Hubbell’s DIN Rail Utility Box offers a labor saving way to provide utility power to any control cabinet. Installing the DIN Rail
Utility Box is as easy as snapping the box onto a 35mm DIN Rail and connecting the line, neutral and ground wires to the
terminal block. Utility power for fans, lights, laptop computers, testers or any other power requirement. If load limiting is a
concern, Hubbell’s “CB” version comes with a 5 Amp circuit breaker that provides over-current protection to make sure that
large loads are not drawn from the DIN Rail Utility Box. All Hubbell DIN Rail Utility Boxes may be mounted either vertically or
horizontally on the DIN Rail; the “H” version comes with the terminal block mounted for easy wiring when the DIN Rail Utility
Box is mounted horizontally.
2.54"
(64.5)
20A 125V
NEMA 5-20R
UL CSA
1 HP
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Duplex Receptacles
3.31"
(84.1)
Description
Color
Catalog Number
Complete unit.
Complete unit, horizontal mount.
Complete unit with 5A circuit breaker.
Complete unit with 5A circuit breaker, horizontal.
Complete unit with aux.
Complete unit with aux and 5A circuit breaker.
Complete unit with NEMA® 6-20R duplex (250V).
Gray
Gray
Gray
Gray
Gray
Gray
Gray
DRUB15
DRUB15H
DRUB15CB5
DRUB15HCB5
–
–
–
4.97"
(126.2)
DRUB20
–
–
–
DRUB20AC
DRUB20ACCB5
DRUB5462*
DRUB15
2.54"
(64.5)
3.31"
(84.1)
GFCI Duplex Receptacles
Description
Color
Catalog Number
Complete unit.
Complete unit, horizontal.
Complete unit with 5A circuit breaker.
Complete unit with 5A circuit breaker, horizontal.
Complete unit with aux GFCI contacts.
Complete unit, faceless with aux GFCI contacts.
Gray
Gray
Gray
Gray
Gray
Gray
DRUBGFI15
DRUBGFI15H
DRUBGFI15CB5
DRUBGFI15HCB5
DRUBGFI15AC
–
4.97"
(126.2)
DRUBGFI20
–
–
–
DRUBGFI20AC
DRUBGFI20BFAC
DRUBGFI15AC
2.54"
(64.5)
TVSS Duplex Receptacles
Description
Color
Catalog Number
Complete unit.
Gray
DRUBTVSS15
3.31"
(84.1)
–
4.97"
(126.2)
Isolated Ground Duplex Receptacles
Description
Color
Catalog Number
Complete unit.
Gray
DRUBIG15
–
DRUBTVSS15
Toggle Switch Unit
Description
Color
Catalog Number
Complete unit with HBL1221.
Complete unit with 15A 125V SW/REC.
Gray
Gray
DRUB1221AC
DRUB6404
Description
Color
Catalog Number
Pre-wired kit without circuit breaker.
Pre-wired kit with circuit breaker.
Pre-wired kit with aux.
Pre-wired kit with circuit breaker and aux.
Communications kit (unloaded).
(For use with Network Wiring frames in section W).
Switch plate only.
Rectangular opening plate only.
1.60 in. opening plate only.
1.40 in. opening plate only.
Duplex receptacle plate only.
Gray
Gray
Gray
Gray
Gray
DRUBKIT
DRUBKITCB5
DRUBKITAC
DRUBKITACCB5
HIDRUBCKIT
2.54"
(64.5)
3.31"
(84.1)
DIN Rail Utility Box Components
4.97"
(126.2)
Gray
Gray
Gray
Gray
Gray
KP1GY**
KP26GY**
KP720GY**
KP7GY**
KP8GY**
DRUBIG15
3.10"
(78.7)
3.31"
(84.1)
4.97"
(126.2)
Note: See section M for additional information on isolated ground devices.
*DRUB5462 configuration not pictured.
**UL Listed, CSA Certified.
HIDRUBCKIT
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
I-41
PANEL-SAFE®
NFPA 70E Compliant
Features and Benefits
Available in
NEMA TYPE 4, 12 and
NEMA TYPE 4X Versions!
Hubbell GFCI with
Functionality Indicator
Protective clear cover
Cat. 5e Ethernet access*
Overcurrent protection
Additional convenience
outlet on GFCI versions
Supplemental “Tool”
entry screw closure
Locking Hasp
accepts ⁵⁄₃₂" padlock
Application
Finger-safe contacts
Stainless steel snap latch
Note: *Additional computer interfaces and PLC connections available upon request.
Specifications
Electrical
GFCI - conforms to UL 943 2006 requirement
In-Cabinet Receptacle - GFCI protected
Data Jack - Cat. 5e
Circuit Breaker - 3A
Environmental
Enclosure - NEMA Type 4, 12 and
NEMA Type 4X
Mechanical
Cover - Clear Polycarbonate (UV Rated)
Housing - Cast Aluminum
Finish - Powder Coat
Latch - Stainless steel
Certification
UL Recognized
CSA Certified
I-42
®
Wiring Device-Kellems
www.hubbell-wiring.com
PANEL-SAFE®
NFPA 70E Compliant
Power and Data Access Ports
Power Only
Description
NEMA TYPE 4, 12
20A 125V GFCI with In-Cabinet Receptacle.
PR20
NEMA TYPE 4X
—
Data Only
Description
NEMA TYPE 4, 12
NEMA TYPE 4X
Cat. 5e Ethernet Access only.
P5E
P4X5E
DB9 Interface Connector only.
PDB9
—
PANEL-SAFE Data Port with DB9 Connector.
PDB9MF
—
DH + Combo (DB9/8M Din) and Cat. 5e Ethernet.
PDH5E
—
PANEL-SAFE Data Port, 2 USBA, 3' Cable.
—
P4XUSBA2C3
PR20
P5E
Power and Data
Description
NEMA TYPE 4, 12
NEMA TYPE 4X
20A 125V GFCI with In-Cabinet Receptacle
and Cat. 5e Ethernet Access.
PR205E
PR4X205E
20A 125V GFCI with In-Cabinet Receptacle,
Cat. 5e Ethernet Access and 3A Circuit Breaker.
PR205EB
PR4X205EB
PANEL-SAFE with 20A GFCI and Cat.5E, DB9
and 3A Circuit Breaker.
PR205EDB9B
—
PANEL-SAFE with 20A GFCI and Cat.5E, 1 USB.
PR205EUSBA
—
PANEL-SAFE with 20A GFCI and Cat.5E, 2 USB.
PR205EUSBA2
—
PANEL-SAFE Data Access Port.
PR205EUSBA2VGA
—
20A 125V GFCI Power and Cat. 5e Ethernet,
DH + Combo (DB9/8M Din).
P20DH5E
—
PANEL-SAFE with 20A GFCI and Cat.5/DB9.
P205EDB9
—
15A 125V Power and Cat. 5e Ethernet Access.
P155E
P4X155E
15A 125V Power, Cat. 5e Ethernet Access
and 3A Circuit Breaker.
P155EB
P4X155EB
15A 125V Power and (2) Cat. 5e Ethernet Access.
P155E2
—
15A 120V AC Power, NEMA 12/4, DB9 M/F, 10' Cable.
P15DB9MFC10
—
15A 125V Power and DH485 Interface
(RJ-45F to RJ-45M, 10' Cable).
P15DH485C10
—
15A 125V Power and Micrologix 8M Din/F
to 8M Din/M, 10' Cable.
P15ML8F8MC10
—
PR205E
PR205EB
P155E
P155EB
Additional computer interfaces, PLC connections and configurations available
upon request. Consult factory for catalog number and availability.
www.hubbell-wiring.com
®
Wiring Device-Kellems
I-43
HI-Impact
Industrial Ethernet Connector and Harsh Environment Connectors
Housing made from
high impact polymer
Hubbell’s Industrial Ethernet System provides leading
edge Category 5e and 6 network transmission
performance suitable for industrial and other harsh
environments. This system incorporates the use of
our standard data connectivity jacks which feature
our keystone latching mechanism, in a rugged sealed
housing providing IP67 rated protection.
IP67 rated - sealed
connection
Extend your LAN to include automation equipment
and manufacturing or process control equipment.
Utilize the Hubbell system to provide added
protection in harsh environments such as convention
centers, food processing plants, outdoor billboards
and display screens, medical and other environments
which require added protection from moisture,
corrosion, dust-debris, vibration and chemicals.
O-Rings for
moisture protection
Standard Hubbell Keystone
Latching System
Industrial Ethernet Connectors
Environmental Specifications
Description
Catalog Number
Ingress Protection:
Cat. 5e Connector
HI5E
Cat. 6 Connector
HI6
Cat. 5e Inline
Coupler Connector
HI5EC
Cat. 6 Inline
Coupler Connector
HI6C
NEMA TYPE 4X (connectors).
IP67 and IP66 (dust/water). IP55 (plates).
Resistant to most common chemicals,
oils and cleaning agents.
UV resistant.
Corrosion:
HI-Impact Housing:
HI-Impact Housing
Temperature Range:
TIA/EIA-568-B.2 -25°C to 70°C.
Material
Valox®, UL 94V-0.
Beryllium copper with a minimum of
50 micro-inch gold plating over nickel
under plating.
HI-Impact Housing:
Nose Contacts:
Mechanical
Vibration
Frequency Range:
Acceleration:
Mating Cycles:
UL 1863 compliant.
AE
10-500Hz.
5g (operational).
750 minimum.
Electrical
EE
AA
Category 6 and 5e
component connectors
ANSI/TIA/EIA-568-B.2-1 (Cat. 6 and 5e). Supports TIA-1005
Industrial Telecommunications Infrastructure.
Industrial Ethernet Patch Cords and Plugs
Description
Catalog Number
HI-Impact RJ-45 to standard RJ-45.
HI6xxAE
HI-Impact RJ-45 on both ends.
HI6xxEE
Standard RJ-45 on both ends.
HI6xxAA
Note: Substitute “XX” with 03, 05, 07, 10, 15, 20, 25, 30, 35, 40, 45, 50 to indicate length in feet.
HICH
HIC
Coupler Housing and Connector Cap
Description
Catalog Number
HI-Impact coupler housing is a perfect solution for temporary and
flexible work areas where single port drops are needed. Add any
HI-Impact connector to support your application.
HICH
Connector Cap
HIC
HI-Impact Wallplates
Description
HISF11
Port Openings
Gang
Stainless steel wallplate.
1
1
HISF11
Catalog Number
Stainless steel wallplate.
2
1
HISF12
Stainless steel wallplate.
2
2
HISF22
Stainless steel wallplate.
4
2
HISF24
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
I-44
®
Wiring Device-Kellems
www.hubbell-wiring.com
Section J
Cable, Cord and Hose Reels
Index
Weatherproof Reels
Product
Page
Weatherproof Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .J-2
Industrial Power Cord Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .J-3
Industrial and Commercial Lighted Cord Reels . . . . . . . . . . . . . . . . . . . . .J-4
Commercial Cord Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .J-5
Air/Water Hose Reels and Static Discharge Reels . . . . . . . . . . . . . . . . . . .J-6
Industrial Reels
Commercial Reels
Air/Water Hose Reels and
Static Discharge Reels
www.hubbell-wiring.com
®
Wiring Device-Kellems
J-1
Cable, Cord and Hose Reels
Weatherproof Reels
UL Type 4X enclosure protects spring motor,
junction box, slip ring assembly and cable
entrance from hosedown or corrosion
Multi-position roller guide can be
mounted in four different positions
Ratchet lock can be disengaged in
field for constant tension application
Optional pivot base allows 340° rotation of
reel and increases range of cable to nearly
any direction
Powder coated, solid steel
construction
HBL501242W
Weatherproof Cable Reels, 50 Ft. (15.2m)
Cable Type
Amps
Volts AC
Weight
Lbs. (kg)
Catalog Number
14" weatherproof reel.
14/3 SOW-A
15
600
55 (24.9)
HBL501431W*
16" weatherproof reel.
12/3 SOW-A
20
600
80 (36.3)
HBL501232W*
16" weatherproof reel,
(white reel housing).
12/3 SOW-A
20
600
80 (36.3)
HBL501232WM1*
Description
HBL501242W
16" weatherproof reel.
12/4 SOW-A
16
600
86 (39.0)
HBL501242W*
16" weatherproof reel.
10/3 SOW-A
25
600
86 (39.0)
HBL501032W*
16" weatherproof reel,
(white reel housing).
10/3 SOW-A
25
600
86 (39.0)
HBL501032WM1*
16" weatherproof reel.
10/4 SOW-A
20
600
92 (41.7)
HBL501042W*
Note: *All weatherproof cable reels are supplied with wire leads and ¾" NPT hub feed. Power supply cable not supplied.
Accessories
Description
HBL14PB
Weight Lbs. (kg) Description
14" pivot base.
5 (2.3)
HBL14PB
16" pivot base.
13 (5.9)
HBL16PB
Replacement stop.
.2 (.09)
HBLWPBS
Specifications
Listing/Certification
UL 355 and CSA, C22.2 No. 21.
Environment
Type 4X enclosure, CAN/CSA - C22.2 No. 21.
Dry, indoor and wet and damp outdoor non-hazardous location.
Dimensions
Inch (mm)
A
B
C
D
E
F
G
H
I
J
14" Reel
6.50"
(165)
8.12"
(206)
16.25"
(413)
13.75"
(349)
3.00"
(76)
12.19"
(310)
3.00"
(76)
3.00"
(76)
3.00"
(76)
6.50"
(165)
16" Reel
6.50"
(165)
9.12"
(232)
18.25"
(464)
15.75"
(400)
3.00"
(76)
14.19"
(360)
6.00"
(152)
6.00"
(152)
4.94"
(125)
6.50"
(165)
Line Entrance
¾" NPT
A
E
Pivot Base
340° Pivot Base (Optional)
ØD
B
G
H
C
F
J
Note: Pivot base for use only with Weatherproof Cable Reel.
Dimensions in Inches (mm)
J-2
I
Mounting Surface 4 Holes
14" 0.44 (11) diameter
16" 0.53 (13) diameter
Reel Base 4 Holes
14" 0.47 (12) diameter
16" 0.53 (13) diameter
®
Wiring Device-Kellems
www.hubbell-wiring.com
Cable, Cord and Hose Reels
Industrial Power Cord Reels
Durable, corrosion resistant
steel construction with design
yellow powder coat finish
Multi-position guide arm
Positive-latch mechanism
automatically maintains
desired cord length
Plug-in 5 ft. long power cord
requires no electrical wiring
12 AWG cord for greater
current carrying capacity
HBL45123TL20
Industrial Power Cord Reels
Cable
Feet (m)
Cable Type
NEMA
Style
Amps
Volts
AC
Weight
Lbs. (kg)
Catalog Number
50 (15.2)
16/3 SJEO
—
10
125
20 (9.1)
HBL50163
Cord End
Without cord ends.
Without cord ends.
45 (13.7)
12/3 SJEO
—
20
125
21 (9.5)
HBL45123
HBL5269C connector.
45 (13.7)
12/3 SJEO
5-15R
15
125
28 (12.7)
HBL45123C
HBL5369C connector.
45 (13.7)
12/3 SJEO
5-20R
20
125
28 (12.7)
HBL45123C20
HBL5369C connector,
(white reel housing).
45 (13.7)
12/3 SJEO
5-20R
20
125
28 (12.7)
HBL45123C20W
HBL2313 connector.
45 (13.7)
12/3 SJEO
L5-20R
20
125
28 (12.7)
HBL45123TL20
HBL2313 connector,
(white reel housing).
45 (13.7)
12/3 SJEO
L5-20R
20
125
28 (12.7)
HBL45123TL20W
Portable outlet box with
(1) gray duplex receptacle.
45 (13.7)
12/3 SJEO
5-15R
15
125
29 (13.2)
HBL45123R
45 (13.7)
12/3 SJEO
5-20R
20
125
29 (13.2)
HBL45123R20
Same as above except white.
45 (13.7)
12/3 SJEO
5-20R
20
125
29 (13.2)
HBL45123R20W
Portable outlet box with
(2) gray duplex receptacle.
45 (13.7)
12/3 SJEO
5-20R
20
125
29 (13.2)
HBL45123R220
Same as above except white.
45 (13.7)
12/3 SJEO
5-20R
20
125
29 (13.2)
HBL45123R220W
Black portable outlet box with
(1) gray duplex receptacle,
(white reel housing).
45 (13.7)
12/3 SJEO
5-20R
20
125
29 (13.2)
HBL45123R20WM1
45 (13.7)
12/3 SJEO
5-15R
15
125
29 (13.2)
HBL45123GF15
45 (13.7)
12/3 SJEO
5-20R
20
125
29 (13.2)
HBL45123GF20
Portable outlet box with
(1) ground fault protected
gray duplex receptacle.
Note: 15 Amp: Supplied with 5 ft. power supply cord with HBL5266C, 15A straight blade plug. 20 Amp: Supplied with 5 ft. power supply
cord with HBL5366C, 20A straight blade plug. Ground fault protected reels supplied with (1) GFM20 and (1) HBLP26FS.
HBL45123C
HBL45123TL20
HBL45123R
HBL45123R20WM1
Accessories
Description
Weight Lbs. (kg)
Catalog Number
Pivot base 340° rotation fits all industrial models.
5 (2.3)
HBL340PB
Replacement stop.
.2 (.09)
HBL12BS
Dimensions
Inch (mm)
Listing/Certification
A
B
C
D
E
F
13.00"
(330)
12.38"
(314)
8.00"
(203)
2.50"
(64)
9.75"
(248)
1.25"
(32)
UL 355
CSA C22.2 No. 21.
HBL45123GF15
Environment
Dry, indoor, non-hazardous locations.
C
A
HBL340PB
D
F E
ØB
Mounting Positions
Wall mount.
Ceiling mount.
Bench mount.
Note: All models have four .625" (15.9) diameter mounting holes.
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
J-3
Cable, Cord and Hose Reels
Industrial and Commercial Lighted Cord Reels
Industrial Lighted Cord Reels, 50 Ft. (15.2m) - 16/3 AWG SJEO Cable
HBL50162LED
Cord End
Watts
(Max)
Amps
Volts AC
Weight
Lbs. (kg)
Catalog Number
LED hand lamp, with end light.
8+1
0.07
120
21 (9.5)
HBL50162LED
Fluorescent hand lamp.
13
0.3
120
21 (9.5)
HBL50162FL
Incandescent hand lamp.
100
0.8
125
21 (9.5)
HBL50163IN
Note: Supplied with 5 ft. power supply cord with HBL5266C, 15A straight blade plug.
Accessories
Watts
(Max)
Amps
Volts
AC
Weight
Lbs. (kg)
Catalog Number
—
—
—
.2 (.09)
HBL16BS
8+1
0.07
120
1 (.5)
HBL16LEDR*
Replacement fluorescent hand lamp.
13
0.3
120
1 (.5)
HBL16FLR
Replacement incandescent hand lamp.
100
0.8
125
1 (.5)
HBL16INR
Description
HBL50162FL
Replacement stop.
Replacement LED hand lamp.
HBL50163IN
Note: *ETL Listed by INTERTEK.
HBLC25143IN
Commercial Lighted Cord Reels
Cable
Feet (m)
Cable Type
Watts
(Max)
Reel with non-metallic
incandescent hand lamp and
automatic shut off switch, yellow.
25 (7.6)
16/3 SJT
75
0.6
Reel with metallic incandescent
hand lamp with receptacle,
yellow.
25 (7.6)
14/3 SJT
1,625
Reel with fluorescent hand lamp
and automatic shut off switch,
white.
40 (12.2)
18/2 SJTOW
Reel with fluorescent hand lamp
and inline receptacle, white.
40 (12.2)
16/3 SJT
Description
HBLC40182AFL
Weight
Lbs. (kg)
Catalog Number
125
9.0 (4.1)
HBLC25163AIN**
13
125
9.5 (4.3)
HBLC25143IN
13
0.3
120
8.2 (3.7)
HBLC40182AFL**
1,200
10
120
9.0 (4.1)
HBLC40163FL
Amps Volts AC
Note: **Allows the electrical cord reel installation to conform to Article 511 of the National Electric Code concerning installation of electrical
devices in commercial garages, repair facilities and storage locations by positioning the switch above the defined area where
hazardous fumes may collect.
HBLC40163FL
Dimensions in Inches (mm)
J-4
INTERTEK and the Intertek logo are registered trademarks of Intertek Group plc.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Cable, Cord and Hose Reels
Commercial Cord Reels
Compact size, flexible mounting
options for ceiling, wall or bench
Durable steel construction
for commercial and general
purpose applications
Removable bracket allows reel
to be dis-engaged from mount
providing portability
Automatic ratchet lock holds cord
at desired length and provides
easy, smooth retraction of cord
Durable light weight non-metallic
housing
HBLC25163C
40 Ft. of 12/3 cord for greater
current carrying capacity
Attached plug for power cord
requires no wiring
Triple tap outlet with supplemental
over current protection
HBLC40123TT
Commercial Cord Reels
Cable
Feet (m)
Cable
Type
Watts
(Max)
Amps
Volts
AC
Weight
Lbs. (kg)
Catalog Number
Reel with triple tap outlet, black.
40 (12.2)
12/3 SJTW
1,875
15
125
9.0 (4.1)
HBLC40123TT
Reel with wire leads, black.
Description
40 (12.2)
12/3 SJTW
1,875
15
125
9.0 (4.1)
HBLC40123
Reel with triple tap outlet, white.
30 (9.1)
16/3 SJT
1,250
15
125
8.5 (3.9)
HBLC30163TT
Reel with a Hubbell HBL5969VBLK
connector, yellow.
25 (7.6)
16/3 SJT
1,250
10
125
8.5 (3.9)
HBLC25163C
Reel with wire leads, yellow.
25 (7.6)
16/3 SJT
1,250
10
125
8.5 (3.9)
HBLC25163*
Note: Reels supplied with 2 ft. power supply cord and molded on straight blade 15A plug.
*UL Listed only.
HBLC40123TT
Specifications
Listing/Certification
UL 355.
Environment
Dry, indoor, non-hazardous locations.
Incandescent Lamp
75 watt max., auto switch, no receptacle; 100 watt max. bulb, with receptacle.
Fluorescent Lamp
10A/1200W max. with in-line receptacle; 13 watt without receptacle.
HBLC25163C
Dimensions
All Other Commercial Reels
excluding Triple Tap
Triple Tap
5.26"
(133.84)
2.83"
(72)
15.51"
(394.6)
30.0"
(762.0)
11.38"
(289)
Wiring Device-Kellems
9.50"
(241)
4.11"
(104)
3.75"
(95.4)
4.19" (106.6)
www.hubbell-wiring.com
1.44"
(36.6)
Dimensions in Inches (mm)
®
Wiring Device-Kellems
J-5
Cable, Cord and Hose Reels
Air/Water Hose Reels and Static Discharge Reels
Spring rewind and
ratchet lock
Steel construction
Multi-position four roller guide
and adjustable hose stop
Compact design minimizes
required installation space
Full flow shafts and swivels
assure maximum product
delivery
Available with steel or nylon
coated steel cable
HBLHR2535
Constructed of rugged
steel, baked polyester
finish components
HBL50SD
Large grounding jaw clamp
provides low resistant
ground termination
Air/Water Hose Reels
Cable
Feet (m)
Max
Pressure
Psi
Frame
Size
Input Hose
Fitting
(NPTF)
O.D.
Inch (mm)
Weight
Lbs. (kg)
Catalog Number
Low pressure ¼" ID.
35 (10.7)
50 (15.2)
300
300
A
B
1/4
1/4
0.51 (13.0)
0.51 (13.0)
24 (10.9)
26 (11.8)
HBLHR2535
HBLHR2550
Low pressure ³⁄₈" ID.
25 (7.6)
50 (15.2)
70 (21.3)
300
300
300
A
C
E
3/8
3/8
3/8
0.65 (16.5)
0.65 (16.5)
0.65 (16.5)
23 (10.4)
36 (16.3)
50 (22.7)
HBLHR3825
HBLHR3850
HBLHR3870
Low pressure ½" ID.
35 (10.7)
50 (15.2)
300
300
C
E
3/8
3/8
0.77 (19.6)
0.77 (19.6)
38 (17.2)
44 (20.0)
HBLHR5035
HBLHR5050
Description
HBLHR2535
Static Discharge Reels
Cable Feet (m)
Cable Type
Weight
Lbs. (kg)
Catalog Number
Static discharge reel.
50 (15.2)
Single ³⁄₃₂" Steel
12 (5.4)
HBL50SD
Static discharge reel.
50 (15.2)
Single ³⁄₃₂" Steel
Nylon Coated
13 (5.9)
HBL50SDN
Static discharge reel.
50 (15.2)*
Dual (Y) ³⁄₃₂" Steel
13 (5.9)
HBL50YSD
Description
Note: *35 ft. (10.6m) + Dual 15 ft. (4.5m) for “Y”.
Dimensions
HBL50SD
Frame size
A
B
C
D
E
F
G
H
J
K
L
M
A
12.88
(327)
11.25
(286)
8.00
(203)
9.88
(250)
12.13
(308)
5.50
(140)
2.50
(64)
2.50
(64)
4.00
(102)
5.09
(132)
8.38
(213)
—
B
14.50
(368)
12.81
(325)
9.75
(248)
11.25
(285)
13.75
(349)
6.19
(157)
3.16
(80)
2.50
(64)
4.00
(102)
5.88
(149)
8.38
(213)
—
C
17.50
(445)
15.63
(286)
9.75
(248)
11.25
(285)
16.50
(419)
6.19
(157)
3.16
(80)
2.50
(64)
4.00
(102)
5.88
(149)
10.25
(260)
—
E
20.38
(518)
18.12
(460)
7.88
(200)
9.45
(240)
19.00
(483)
6.63
(168)
3.35
(85)
3.86
(98)
5.43
(138)
6.10
(155)
11.00
(280)
9.5
(241)
Air/Water Hose Reels
Static Discharge Reel
F
G
A
L
B
C
D
Dimensions in Inches (mm)
J-6
H
J
E
®
K
Mounting holes:
4x Ø 0.31 (A, B, C)
4x Ø 0.46 (E)
Wiring Device-Kellems
8.81"
(224)
7.88"
(200)
8.62"
(219)
1.50"
(38)
3.35"
(85)
www.hubbell-wiring.com
Section K
Ground Fault Products
Index
Product
Page
Tamper/Weather Resistant
GFCI Receptacles
Extra Heavy Duty Industrial and Hospital Grade GFCI Receptacles
Tamper-Resistant and Weather Resistant . . . . . . . . . . . . . . . . . . . . . . . . . K-2
Heavy Duty Commercial and Hospital Grade GFCI Receptacles
Tamper-Resistant and Weather Resistant . . . . . . . . . . . . . . . . . . . . . . . . . K-3
LED with Auto Grounding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-4
Pre-Wired/Leaded LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-6
Tamper-Resistant and Weather Resistant Pre-Wired/Leaded LED . . . . . . K-6
Assembled in USA
LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-7
Pre-Wired/Leaded and
SNAPConnect® GFCI’s
Tamper-Resistant and Weather Resistant LED . . . . . . . . . . . . . . . . . . . . . K-7
SNAPConnect® Commercial Grade GFCI Receptacles
Assembled in USA
LED with Auto Grounding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-9
Tamper-Resistant and Weather Resistant . . . . . . . . . . . . . . . . . . . . . . . . . K-9
GFCI Sensing Module, 50A Maximum Rating - NEMA 4X . . . . . . . . . . . . K-10
Straight Blade Portable GFCI Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-11
Circuit Guard® Plug-In Portable GFCI and GFCI Tester . . . . . . . . . . . . . . K-12
Portable GFCI Line Cords
Industrial Grade, Automatic and Manual Set . . . . . . . . . . . . . . . . . . . . . . K-14
Commercial Grade, Automatic and Manual Set . . . . . . . . . . . . . . . . . . . K-15
GFCI Sensing Module
and Circuit Breaker
Multiple Outlet Portable GFCI and GFCI Module . . . . . . . . . . . . . . . . . . K-16
Hard Wired 30 Ampere GFCI - NEMA 4X . . . . . . . . . . . . . . . . . . . . . . . . . . K-17
Portable 30 Ampere GFCI - NEMA 4X . . . . . . . . . . . . . . . . . . . . . . . . . . . . K-18
Portable GFCI Products
www.hubbell-wiring.com
®
Wiring Device-Kellems
K-1
Ground Fault Products
Extra Heavy Duty Industrial & Hospital Grade GFCI Receptacles
Tamper-Resistant and Weather Resistant
Meets UL Standard 943
Class A GFCI
10kA Short Circuit Current Rating
Limits improper access to energized contacts
• Exclusive patented tamper-resistant
protection through switching technology
Continually tests and monitors for people
protection automatically
• Patented self test diagnostics
Power indication
• Steady “ON” GREEN LED provides
indication of power
Ground fault indicator
• Steady “ON” RED LED provides visual
indication of a ground fault condition;
flashing red indicates device has lost
capability to provide protection
No power at face if reverse wired
• Open circuit condition eliminates false
assumption of protection at face
Durable face with V-0 flammability rating
• Polyester face cover
GFR5362SGI
AUTOGUARD® Self Test GFCI Receptacles
Tamper-Resistant and Weather Resistant
Description
GFR5262SG
Rating
20A 125V
NEMA 5-20R
UL CSA
1 HP
Color
Catalog Number
Flush, polyester face,
back and side wired,
multiple drive screws.
15 and 20A
125V AC
Black
Brown
Gray
Ivory
Red
White
GFR5262SGBK
GFR5262SG
GFR5262SGGY
GFR5262SGI
GFR5262SGR
GFR5262SGW
GFR5362SGBK
GFR5362SG
GFR5362SGGY
GFR5362SGI
GFR5362SGR
GFR5362SGW
Hospital Grade
Flush, polyester face,
back and side wired,
multiple drive screws.
15 and 20A
125V AC
Black
Brown
Gray
Ivory
Red
White
GFR8200SGBK
GFR8200SG
GFR8200SGGY
GFR8200SGI
GFR8200SGR
GFR8200SGW
GFR8300SGBK
GFR8300SG
GFR8300SGGY
GFR8300SGI
GFR8300SGR
GFR8300SGW
Circuit Guard® GFCI Receptacles
Tamper-Resistant and Weather Resistant
Description
GFR5262GYTR
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Rating
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Color
Catalog Number
Flush, polyester face,
back and side wired,
multiple drive screws.
15 and 20A
125V AC
Black
Brown
Gray
Ivory
Red
White
GFR5262BKTR
GFR5262TR
GFR5262GYTR
GFR5262ITR
GFR5262RTR
GFR5262WTR
GFR5362BKTR
GFR5362TR
GFR5362GYTR
GFR5362ITR
GFR5362RTR
GFR5362WTR
Hospital Grade
Flush, polyester face,
back and side wired,
multiple drive screws.
15 and 20A
125V AC
Black
Brown
Gray
Ivory
Red
White
GFR8200BKTR
GFR8200TR
GFR8200GYTR
GFR8200ITR
GFR8200RTR
GFR8200WTR
GFR8300BKTR
GFR8300TR
GFR8300GYTR
GFR8300ITR
GFR8300RTR
GFR8300WTR
Note: GFCI type receptacles should not be used in critical care patient areas or for electrical life support equipment applications because of
the possibility of power interruption. All GFCI receptacles listed above are furnished with both a matching color nylon wallplate,
and a SS26 302/304 super stainless steel wallplate. 20 amp feed-through capability.
See page Tech-10 for Tamper-Resistant and Weather Resistant descriptions.
K-2
®
Wiring Device-Kellems
www.hubbell-wiring.com
Ground Fault Products
Heavy Duty Commercial & Hospital Grade GFCI Receptacles
Tamper-Resistant and Weather Resistant with Auto Grounding
Meets UL Standard 943
Class A GFCI
10kA Short Circuit Current Rating
Limits improper access to energized contacts
• Patented shutter design for tamperresistant protection
No power at face if reverse wired
• Open circuit condition eliminates false
assumption of protection at face
Ground fault EOL indicator
• Flashing RED indicates device has lost
capability to provide protection
Accepts fork terminals
• Open terminal design
Installation ease
• Internal back wiring
• Automatic self-grounding staple
• Captive mounting screws
GFTR20I
Circuit Guard® GFCI Receptacles
Tamper-Resistant and Weather Resistant
Description
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple.
Rating
15 and 20A
125V AC
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFTR15BK
GFTR15
GFTR15GY
GFTR15I
GFTR15LA
GFTR15R
GFTR15W
GFTR20BK
GFTR20
GFTR20GY
GFTR20I
GFTR20LA
GFTR20R
GFTR20W
Circuit Guard® GFCI Receptacles - 3 Pack
Tamper-Resistant and Weather Resistant
Description
3 Pack, flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple.
Rating
15 and 20A
125V AC
GFTR15AL
Color
Catalog Number
Ivory
Light Almond
White
GFTR15I3
GFTR15LA3
GFTR15W3
GFTR20I3
GFTR20LA3
GFTR20W3
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Note: Consult factory for availability of other colors.
Circuit Guard® GFCI Receptacles
Tamper-Resistant and Weather Resistant
Description
Hospital Grade
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple.
Rating
15 and 20A
125V AC
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFR8200HBKTR
GFR8200HTR
GFR8200HGYTR
GFR8200HITR
GFR8200HLATR
GFR8200HRTR
GFR8200HWTR
GFR8300HBKTR
GFR8300HTR
GFR8300HGYTR
GFR8300HITR
GFR8300HLATR
GFR8300HRTR
GFR8300HWTR
Note: GFCI type receptacles should not be used in critical care patient areas or for electrical life support equipment applications because of
the possibility of power interruption. All GFCI receptacles listed above are furnished with a matching color nylon wallplate. 20 amp
feed-through capability.
See page Tech-10 for Tamper-Resistant and Weather Resistant descriptions.
www.hubbell-wiring.com
®
Wiring Device-Kellems
GFR8300HRTR
K-3
Ground Fault Products
Heavy Duty Commercial & Hospital Grade GFCI Receptacles
LED with Auto Grounding
Meets UL Standard 943
Class A GFCI
10kA Short Circuit Current Rating
Comprehensive diagnostics
• When test button is actuated, both the
electronic components and mechanical
trip mechanism are functionally tested
Ground fault EOL indicator
• Flashing RED indicates device has lost
capability to provide protection
No power at face if reverse wired
• Open circuit condition eliminates false
assumption of protection at face
Installation ease
• Internal back wiring
• Automatic self-grounding staple
• Captive mounting screws
GF15ILA
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Circuit Guard® GFCI Receptacles
Description
Rating
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple.
15 and 20A
125V AC
20A 125V
NEMA 5-20R
UL CSA
1 HP
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GF15BKLA
GF15LA
GF15GYLA
GF15ILA
GF15LALA
GF15RLA
GF15WLA
GF20BKLA
GF20LA
GF20GYLA
GF20ILA
GF20LALA
GF20RLA
GF20WLA
Circuit Guard® GFCI Receptacles - 3 Pack
GF15ALLA
Description
Rating
3 Pack, flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple.
15 and 20A
125V AC
Color
Catalog Number
Ivory
Light Almond
White
GF15ILA3
GF15LALA3
GF15WLA3
GF20ILA3
GF20LALA3
GF20WLA3
Note: Consult factory for availability of other colors.
Hospital Grade
Circuit Guard® GFCI Receptacles
Description
Rating
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple.
GFR8200HRLA
K-4
15 and 20A
125V AC
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFR8200HBKLA
GFR8200HLA
GFR8200HGYLA
GFR8200HILA
GFR8200HLAA
GFR8200HRLA
GFR8200HWLA
GFR8300HBKLA
GFR8300HLA
GFR8300HGYLA
GFR8300HILA
GFR8300HLAA
GFR8300HRLA
GFR8300HWLA
Note: GFCI type receptacles should not be used in critical care patient areas or for electrical life support equipment applications because of
the possibility of power interruption. All GFCI receptacles listed above are furnished with a matching color nylon wallplate. 20 amp
feed-through capability.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Ground Fault Products
Heavy Duty Commercial GFCI Receptacles
LED with Auto Grounding
Circuit Guard® Bulk Pack GFCI Receptacles
Description
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple.
Bulk packed, (50 pieces
without wallplate).
Rating
15 and 20A
125V AC
Meets UL Standard 943
Class A GFCI
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GF15BKLABULK
GF15LABULK
GF15GYLABULK
GF15ILABULK
GF15LALABULK
GF15RLABULK
GF15WLABULK
Color
Catalog Number
GF20BKLABULK
GF20LABULK
GF20GYLABULK
GF20ILABULK
GF20LALABULK
GF20RLABULK
GF20WLABULK
GF15BKLABULK
Circuit Guard® Faceless GFCI
Description
Faceless, nylon top,
back and side wired,
multiple drive screws,
self-grounding staple.
Rating
20A
125V AC
Black
Brown
Gray
Ivory
Light Almond
Red
White
–
–
–
–
–
–
–
GFBF20BKLA
GFBF20LA
GFBF20GYLA
GFBF20ILA
GFBF20LALA
GFBF20RLA
GFBF20WLA
GF20GYLABULK
Note: GFCI type receptacles should not be used in critical care patient areas or for electrical life support equipment applications because of
the possibility of power interruption. All GFCI receptacles listed above are furnished with a matching color nylon wallplate.
Combination Switch/GFCI
Description
Single-pole switch,
GFCI grounding receptacle,
back and side wired, matching
nylon wallplate included.
Rating
15A 120V
(Switch)
15A 125V
(Receptacle)
Color
Catalog Number
Ivory
Light Almond
White
GFSP15IC
GFSP15LAC
GFSP15WC
GFBF20ILA
–
–
–
GFCI Receptacle Specifications per GFCI Products Listed (Pages K-2 to K-9)
Trip Level
Trip Time
Frequency
Voltage
Amperage
Maximum Interrupting Capacity
Operating Temperature
Maximum Humidity
Listings and Standards
Codes
GFSP15WC
4 to 6 mA.
.025 second nominal.
60 Hz.
120V AC +10% - 15% (102V to 132V).
15A/20A, 20A Feed Thru.
10,000A.
-35°C to 66°C or -30°F to 150°F.
95%.
Meets UL498 for receptacles, UL943 Class A for GFCIs UL File E41978.
CSA Certified.
Meets all NEC® and CEC requirements. NEMA WD-6 ANSI 73.
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
www.hubbell-wiring.com
®
Wiring Device-Kellems
K-5
Ground Fault Products
Heavy Duty Commercial & Hospital Grade GFCI Receptacles
Pre-Wired/Leaded LED
Meets UL Standard 943
Class A GFCI
Applications
GFCI LED Pre-Wired/Leaded,
#12 Solid Wire, 8 Inch Leads
Description
Impact resistant flush nylon face,
LED, self-grounding staple,
8" solid wire leads.
GF15GYLAP1
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Rating
Color*
Catalog Number
15 and 20A
125V AC
Gray
Ivory
White
GF15GYLAP1
GF15ILAP1
GF15WLAP1
20A 125V
NEMA 5-20R
UL CSA
1 HP
GF20GYLAP1
GF20ILAP1
GF20WLAP1
Note: *Consult factory for additional colors.
GFCI LED Pre-Wired/Leaded,
#12 Stranded Wire, 8 Inch Leads
Description
Impact resistant flush nylon face,
LED, self-grounding staple,
8" stranded wire leads.
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Rating
Color*
Catalog Number
15 and 20A
125V AC
Gray
Ivory
White
GF15GYLAP2
GF15ILAP2
GF15WLAP2
20A 125V
NEMA 5-20R
UL CSA
1 HP
GF20GYLAP2
GF20ILAP2
GF20WLAP2
Note: *Consult factory for additional colors.
GF20ILAP2
GFCI LED Tamper and Weather Resistant
Pre-Wired/Leaded, #12 Solid Wire, 8 Inch Leads
Description
Tamper and Weather Resistant,
impact resistant flush nylon face,
LED, self-grounding staple,
8" solid wire leads.
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Rating
Color*
Catalog Number
15 and 20A
125V AC
Gray
Ivory
White
GFTR15GYP1
GFTR15IP1
GFTR15WP1
20A 125V
NEMA 5-20R
UL CSA
1 HP
GFTR20GYP1
GFTR20IP1
GFTR20WP1
Note: *Consult factory for additional colors.
See page Tech-10 for Tamper-Resistant and Weather Resistant descriptions.
GFTR15WP1
GFCI LED Tamper and Weather Resistant
Pre-Wired/Leaded, #12 Stranded Wire, 8 Inch Leads
Description
Tamper and Weather Resistant,
impact resistant flush nylon face,
LED, self-grounding staple,
8" stranded wire leads.
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Rating
Color*
Catalog Number
15 and 20A
125V AC
Gray
Ivory
White
GFTR15GYP2
GFTR15IP2
GFTR15WP2
20A 125V
NEMA 5-20R
UL CSA
1 HP
GFTR20GYP2
GFTR20IP2
GFTR20WP2
Note: *Consult factory for additional colors.
See page Tech-10 for Tamper-Resistant and Weather Resistant descriptions.
GFTR20GYP2
K-6
®
Wiring Device-Kellems
www.hubbell-wiring.com
Ground Fault Products
Heavy Duty Commercial & Hospital Grade LED GFCI Receptacles
Assembled in USA
Meets UL Standard 943
Class A GFCI
Applications
GFCI LED,
Assembled in USA
Description
Impact resistant flush nylon face,
back and side wired, LED,
self-grounding staple.
Assembled in the USA.
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Rating
15 and 20A
125V AC
20A 125V
NEMA 5-20R
UL CSA
1 HP
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GF15BKLU
GF15LU
GF15GYLU
GF15ILU
GF15LALU
GF15RLU
GF15WLU
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFR8200HBKLU
GFR8200HLU
GFR8200HGYLU
GFR8200HILU
GFR8200HLALU
GFR8200HRLU
GFR8200HWLU
GF20BKLU
GF20LU
GF20GYLU
GF20ILU
GF20LALU
GF20RLU
GF20WLU
GF15GYLU
GFCI LED Hospital Grade,
Assembled in USA
Description
Hospital Grade , impact resistant
flush nylon face, back and side wired,
LED, self-grounding staple.
Assembled in the USA.
Rating
15 and 20A
125V AC
GFR8300HBKLU
GFR8300HLU
GFR8300HGYLU
GFR8300HILU
GFR8300HLALU
GFR8300HRLU
GFR8300HWLU
GFCI LED Tamper and Weather Resistant,
Assembled in USA
Description
Tamper and Weather Resistant,
impact resistant flush nylon face,
back and side wired, LED,
self-grounding staple.
Assembled in the USA.
Rating
15 and 20A
125V AC
GFR8300HWLU
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFTR15BKU
GFTR15U
GFTR15GYU
GFTR15IU
GFTR15LAU
GFTR15RU
GFTR15WU
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFR8200HBKTRU
GFR8200HTRU
GFR8200HGYTRU
GFR8200HITRU
GFR8200HLATRU
GFR8200HRTRU
GFR8200HWTRU
GFTR20BKU
GFTR20U
GFTR20GYU
GFTR20IU
GFTR20LAU
GFTR20RU
GFTR20WU
GFCI LED Hospital Grade Tamper and
Weather Resistant, Assembled in USA
Description
Hospital Grade , Tamper and
Weather Resistant, impact resistant
flush nylon face, back and side wired,
LED, self-grounding staple.
Assembled in the USA.
Rating
15 and 20A
125V AC
GFR8300HBKTRU
GFR8300HTRU
GFR8300HGYTRU
GFR8300HITRU
GFR8300HLATRU
GFR8300HRTRU
GFR8300HWTRU
GFTR20IU
Note: Many of the products listed on this page are assembled in USA and many are Buy American Compliant. Please contact Hubbell
for specific certification requirements.
See page Tech-10 for Tamper-Resistant and Weather Resistant descriptions.
The products listed on this page are Assembled in USA, and many are Buy American
Compliant. Please contact Hubbell with any certification requirements.
www.hubbell-wiring.com
®
Wiring Device-Kellems
GFR8300HLATRU
K-7
Ground Fault Products
SNAPConnect® Commercial Grade GFCI Receptacles
Assembled in USA
Meets UL Standard 943
Class A GFCI
No Special Tester Required
.085 inch keyhole accepts the
probe points found on the most
common voltage testers and
digital multi-meters
Audible SNAP, indicates solid connection
• Secure, easy grip latch
Inspection of power contacts
• Clear terminal housing
• No exposed metal
Requires minimal box space
• Compact size
• Clean finished look
Installation ease
• Self-grounding staple
SNAP1RNA
GFR20SNAPINA
Many of these products are Assembled in USA, as indicated, and many are Buy American Compliant.
Please contact Hubbell with any certification requirements.
Labor Savings Feature!
Save one Minute!
Rough-in the SNAPConnect®
terminal instead of pigtails.
K-8
Save Over Three Minutes!
Remove protective packaging
and SNAPConnect® device to
the circuit.
®
Wiring Device-Kellems
Complete Trim-Out
in Less Than One Minute!
Secure mounting screws, attach
wallplate, job complete.
www.hubbell-wiring.com
Ground Fault Products
SNAPConnect® Commercial Grade GFCI Receptacles
Assembled in USA
SNAPConnect® GFCI LED,
Assembled in USA
Description
SNAPConnect GFCI LED,
self-grounding staple,
requires connector below,
sold separately.
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Rating
Color
15 and 20A Black
125V AC
Brown
Gray
Ivory
Light Almond
Red
White
Meets UL Standard 943
Class A GFCI
20A 125V
NEMA 5-20R
UL CSA
1 HP
Commercial Grade
15A GFCI
Commercial Grade
20A GFCI
GFR15SNAPBKNA
GFR15SNAPNA
GFR15SNAPGYNA
GFR15SNAPINA
GFR15SNAPLANA
GFR15SNAPRNA
GFR15SNAPWNA
GFR20SNAPBKNA
GFR20SNAPNA
GFR20SNAPGYNA
GFR20SNAPINA
GFR20SNAPLANA
GFR20SNAPRNA
GFR20SNAPWNA
GFR15SNAPGYNA
SNAPConnect® GFCI LED Hospital Grade,
Assembled in USA
Description
Hospital Grade ,
SNAPConnect GFCI LED,
self-grounding staple,
requires connector below,
sold separately.
Rating
Color
15 and 20A Black
125V AC
Brown
Gray
Ivory
Light Almond
Red
White
Hospital Grade
15A GFCI
Hospital Grade
20A GFCI
GFR8200SNAPBKNA
GFR8200SNAPNA
GFR8200SNAPGYNA
GFR8200SNAPINA
GFR8200SNAPLANA
GFR8200SNAPRNA
GFR8200SNAPWNA
GFR8300SNAPBKNA
GFR8300SNAPNA
GFR8300SNAPGYNA
GFR8300SNAPINA
GFR8300SNAPLANA
GFR8300SNAPRNA
GFR8300SNAPWNA
SNAPConnect® GFCI LED Tamper and
Weather Resistant, Assembled in USA
Description
SNAPConnect GFCI TR/WR,
self-grounding staple,
requires connector below,
sold separately.
Rating
Color
15 and 20A Black
125V AC
Brown
Gray
Ivory
Light Almond
Red
White
GFR8300SNAPRNA
Commercial Grade
15A GFCI
Commercial Grade
20A GFCI
GFTR15SNAPBKNA
GFTR15SNAPNA
GFTR15SNAPGYNA
GFTR15SNAPINA
GFTR15SNAPLANA
GFTR15SNAPRNA
GFTR15SNAPWNA
GFTR20SNAPBKNA
GFTR20SNAPNA
GFTR20SNAPGYNA
GFTR20SNAPINA
GFTR20SNAPLANA
GFTR20SNAPRNA
GFTR20SNAPWNA
SNAPConnect® GFCI LED Hospital Grade
Tamper and Weather Resistant, Assembled in USA
Description
Hospital Grade ,
SNAPConnect GFCI TR/WR,
self-grounding staple,
requires connector below,
sold separately.
Rating
Color
15 and 20A Black
125V AC
Brown
Gray
Ivory
Light Almond
Red
White
GFTR20SNAPINA
Hospital Grade
15A GFCI
Hospital Grade
20A GFCI
GFTR8200SNAPBKNA
GFTR8200SNAPNA
GFTR8200SNAPGYNA
GFTR8200SNAPINA
GFTR8200SNAPLANA
GFTR8200SNAPRNA
GFTR8200SNAPWNA
GFTR8300SNAPBKNA
GFTR8300SNAPNA
GFTR8300SNAPGYNA
GFTR8300SNAPINA
GFTR8300SNAPLANA
GFTR8300SNAPRNA
GFTR8300SNAPWNA
SNAPConnect® Right Angle Pigtailed Terminal
Description
Wire Type
General Use
Catalog Number
Assembled in USA
Catalog Number
Clear right angle terminal with 6 inch leads,
600V, #12 AWG THHN/THWN-2,
Polycarbonate housing material.
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
GFTR8300SNAPWNA
Note: See page Tech-10 for Tamper-Resistant and Weather Resistant descriptions.
Many of these products are Assembled in USA, as indicated, and many are Buy
American Compliant. Please contact Hubbell with any certification requirements.
www.hubbell-wiring.com
®
Wiring Device-Kellems
SNAP1RNA
K-9
Ground Fault Products
GFCI Sensing Module, 50A Maximum Rating - NEMA 4X
Typical Applications Include:
Power Generators, Spas, High Pressure Washers, Power Centers, Refineries and Mobile Power.
The sensing module functions interdependently with a magnetic branch circuit breaker. The module monitors the electrical
circuit by use of an external differential current transformer. No direct load is present at the module. In the event of a ground
fault, the load is interrupted by way of the hydraulic magnetic circuit breaker utilizing a shunt trip coil.
This line of Sensing Modules is rated from 1 to 50 Amps and circuit current-carrying conductors from 1 to 3 poles.
Product is available with an automatic or manual “safe start” reset feature. The enclosure, when mounted with the supplied
gasket, achieves a UL NEMA 4X Rating. This module and breaker system is ideal for portable generator integration protecting
all outlets on a generator. This system meets the proposed requirements for generators Underwriters Laboratory Standard
2201. UL/cUL 943 Listed, Class A 4-6mA trip level and UL 1053 Compliant.
GFCI Sensing Module – 50A Maximum
Description
Catalog Number
120V AC Sensing Module Auto
GFSM120A
120V AC Sensing Module Manual
GFSM120M
240V AC Sensing Module Auto
GFSM240A
240V AC Sensing Module Manual
GFSM240M
GFCI Sensing Module Circuit Breakers
Catalog Number Configurator
GFSM120M
Ground Fault Sensing
Module Circuit Breaker
A/C Voltage
Amperage
Number
of Poles
120
120
GFSMCB
GFSMCB120401P
Wiring Schematics
CIRCUIT
BREAKER
LOAD
PART #
AUTO GFSM120A
MAUUAL GFSM120M
120VAC GFCI
SENSING
MODULE
NO
C
H
GFSM240A or M
GFSM120A or M
120/240
3
GFSM120A or M
GFSMCB120401P:
GFSMCB240502P:
GFSMCB120240203P:
Current carrying leads must
be twisted as they go through
the sensing module.
120V, 40A, 1 Pole
240V, 50A, 2 Pole
120/240V, 20A, 3 Pole
240VAC GFCI
SENSING
MODULE
GFSMCB120240xx3P
ORANGE
SHUNT
JUMPER
L1
LOAD
LOAD--->
N
NO
C
GROUND
®
120VAC GFCI
SENSING
MODULE
LOAD--->
L2
L1
N
120/
240V AC
IN
SINGLE PHASE 240VAC (L1, L2, GRND)
G
Wiring Device-Kellems
CIRCUIT
BREAKER
ORANGE
SHUNT
JUMPER
L2
LOAD
PART #
AUTO GFSM120A
MAUUAL GFSM120M
LINE
RED
BLACK
YELLOW (SHUNT)
SINGLE PHASE 120VAC (HOT, NEUTRAL, GRND)
Current carrying leads must
be twisted as they go through
the sensing module.
L2
L1
L2
240V AC
IN
WHITE
BLACK
YELLOW (SHUNT)
K-10
CIRCUIT
BREAKER
PART #
AUTO GFSM240A
MAUUAL GFSM240M
120V AC
IN
GROUND
GFSM120A or M
2
1 to 50
GFSMCB240xx2P
ORANGE
SHUNT
JUMPER
LINE
H
N
2
120/240
GFSMCB120xx1P
Current carrying leads must
be twisted as they go through
the sensing module.
GFSM120A or M
2
240
Example Catalog Numbers:
Sensing Module Required
1
NO
C
L1
LOAD--->
LINE
N
WHITE
BLACK
YELLOW (SHUNT)
SPLIT PHASE 120/240VAC (L1, L2, N, GRND)
G
GROUND
G
www.hubbell-wiring.com
Ground Fault Products
Straight Blade Portable GFCI Plugs
15 Ampere, 120 Volts AC, 2 Pole, 3 Wire Grounding
Circuit Guard® Wired On Industrial Portable GFCI Plug
Description
Rating
Catalog Number
GFCI plug, manual set, black.
2 pole, 3 wire grounding,
15A, 125V, NEMA 5-15P.
GFP5266C
GFCI plug, manual set, yellow.
2 pole, 3 wire grounding,
15A, 125V, NEMA 5-15P.
GFP5266CY
GFCI plug with 1 foot line cord,
manual set, yellow, with
connector body.
2 pole, 3 wire grounding,
15A, 125V, NEMA 5-15P, NEMA 5-15R.
GFP1C
Circuit Guard® Wired On Commercial Portable GFCI Plug
Description
Rating
Catalog Number
GFCI plug, automatic set
field wireable, black.
2 pole, 3 wire grounding,
15A, 125V, NEMA 5-15P.
GFP515A
GFCI plug, manual set
field wireable, black.
2 pole, 3 wire grounding,
15A, 125V, NEMA 5-15P.
GFP515M
GFP5266CY
Specifications
Trip Level
Trip Time
Frequency
Voltage
Amperage
Maximum Interrupting Capacity
Operating Temperature
Maximum Humidity
Housing
Input
Cord Range
Cord Type: Length (GFP1C)
Power “ON” Indication
Listings
Codes
4 to 6 mA.
.025 sec. nominal.
60 Hz.
120V AC +10% – 15%. Incorporates no voltage release feature.
15A.
2000A.
-35°C to 66°C or -30°F to 150°F.
95%.
High-impact, UV stabilized material. UL 94V-0 flammability classification.
NEMA 5-15P.
16/3 – 12/3 Type SJ, 18/3 – 12/3 Type S.
14/3 Type SJTW-A (UL), SJTW (CSA); 1 foot; NEMA 5-15R.
Indicator light.
Meets UL943 Class A Listed, CSA Certified.
Meets all NEC® and CEC requirements.
GFP515A
Dimensions
GFP5266C Series
1.60"
(40.6)
GFP515 Series
.81"
(20.5)
4.95"
(125.7)
2.21"
(56.1)
1.35"
(34.3)
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
K-11
Ground Fault Products
Circuit Guard® Plug-In Portable GFCI and GFCI Tester
15 Ampere, 120 Volts AC, 2 Pole, 3 Wire Grounding
Circuit Guard® Plug-In Portable GFCI
Description
Rating
Catalog Number
Three outlet plug-in.
15A, 120V AC
GFP315A
Specifications
GFP315A
GFP315A
Trip Level
Trip Time
Frequency
Voltage
Amperage
Maximum Interrupting Capacity
Operating Temperature
Maximum Humidity
Housing
Input
Output
Fault Indication
Center Screw
Listings and Standards
4 to 6 mA.
.025 sec. nominal.
60 Hz.
120V AC +10% – 15%. Incorporates no voltage release feature.
15A.
2000A.
-35°C to 66°C or -30°F to 150°F.
95%.
High-impact ABS.
NEMA 5-15P.
3 NEMA 5-15R.
Indicator light.
For optional permanent mounting.
Meets UL498 for receptacles, UL943 Class A for GFCIs UL File E41978,
CSA Certified.
Meets all NEC® and CEC requirements.
Codes
GFCI Tester
Description
Rating
Catalog Number
Ground fault tester.
120V AC
GFT2G
• Designed to measure the trip level of portable or “wired-in” GFCI’s in a range of 2-7mA.
Leakage level can be adjusted from 2-7mA.
• Ideal for measuring leakage level of GFCI breakers, GFCI portables and GFCI receptacles.
GFT2G
Dimensions
1.50
(38.1)
5.50
(139.7)
FAULT
LIGHT
RESET
TEST
5.83
(148.0)
3.45
(87.6)
Dimensions in Inches (mm)
K-12
.82
(20.8)
1.76
(44.7)
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
®
Wiring Device-Kellems
www.hubbell-wiring.com
Ground Fault Products
Portable GFCI Line Cords
Features and Benefits
Circuit Guard® Set GFCI Line Cord
Portable GFCI Line Cords provide ground fault protection both indoors and out. They interrupt electrical power for
equipment loads when leakage to ground is 4-6 milliamperes. Available in lengths of 18" (45.7 cm), 6' (182.9 cm), and
25' (762 cm). A 15' (457.2 cm) OEM version with stripped leads is also available. They are offered with an Automatic Set
or Manual Set feature to meet your application.
Available in Automatic Set with yellow base or Manual Set with black base.
All-glass circuit board provides
superior moisture immunity
High impact UV stabilized
housing resists dust, sunlight
and chemicals for long life
One-piece flush sealed
keypads for greater
reliability and resistance
to damage due to impact
Heavy-duty molded plug
and connector for reliable
connection
Solid (not formed) plug
blades are crimped and
soldered for a better
connection and longer life
Bright fault indicator light
provides fault confirmation
from a distance
Watertight GFCI housing for
use in harsh environments
GFP4C15M
Heavy-duty molded strain
relief prevents conductor
strain and resulting failure
www.hubbell-wiring.com
®
Wiring Device-Kellems
K-13
Ground Fault Products
Portable GFCI Line Cords
Industrial Grade, Automatic and Manual Set
IP21
Circuit Guard® Automatic Set
Portable GFCI Line Cords
GFP4C15A
SUITABILITY
15A 120V AC
Description
Catalog Number
18" (45.7 cm) GFCI line cord.
GFP4C15A
6' (182.9 cm) GFCI line cord.
GFP6C15A
25' (762.0 cm) GFCI line cord.
GFP25C15A
15' (457.2 cm) GFCI power supply cord with stripped leads.
GFPOEMA*
Circuit Guard® Manual Set
Portable GFCI Line Cords
15A 120V AC
Description
Catalog Number
18" (45.7 cm) GFCI line cord.
GFP4C15M
–
3' (91.4 cm) GFCI line cord.
GFP25C15A
20A 120V AC
–
GFP3C20M
6' (182.9 cm) GFCI line cord.
GFP6C15M
–
25' (762.0 cm) GFCI line cord.
GFP25C15M
–
–
15' (457.2 cm) GFCI power supply cord with stripped leads.
GFPOEMM*
50' (1524.0 cm) GFCI power supply with Elastogrip®
watertight straight blade.
GFP50C15WM
100' (3048.0 cm) GFCI power supply with Elastogrip®
watertight straight blade.
GFP100C15WM
Note: *Total length is 15' 4.5" (468.6 cm) including leads: green 4.5" (114.3), black and white 3.5" (88.9). Each pre-stripped .375" (9.5).
Circuit Guard® Manual Set
Twist-Lock Portable GFCI Line Cords
15A 120V AC
Description
Catalog Number
3' (91.4 cm) GFCI line cord.
GFP3C15MTL
Automatic Set GFCI
GFP6C15M
Automatically energizes or sets the GFCI for use upon
plug in and after the loss of primary power (power failure
or unplugging the device). After a ground fault condition,
unit must be reset by pushing the reset button. This
feature eliminates the need for unit to be reset each time it
is plugged in or powered up. Ideal for equipment intended
for continuous use where a temporary power failure is
likely and undesirable. Examples are pumps, pressure
washers, portable signs or lighting and engine heaters.
20A 120V AC
GFP3C20MTL
Manual Set GFCI
Requires the GFCI to be manually set for use by pressing
the reset button upon plug in and after loss of primary
power (power failure or unplugging the device). Must
be manually reset after a ground fault condition. Ideal
for applications where operator injury might occur if
equipment were to restart after a power failure. Typical
equipment includes power drills, saws, lathes and grinders.
Straight Blade
Twist-Lock®
Input
15A NEMA 5-15P,
20A NEMA 5-20P.
15A NEMA L5-15P HBL47CM20C,
20A NEMA L5-20P HBL23CM11.
Output
15A NEMA 5-15R (except GFPOEMM),
20A NEMA 5-20R.
15A NEMA L5-15R HBL47CM29C,
20A NEMA L5-20R HBL23CM13.
GFPOEMM
Specifications
Portable GFCI Line Cords
Trip Level
Trip Time
Frequency
Voltage
Amperage
Maximum Interrupting Capacity
Operating Temperature
Maximum Humidity
Housing
GFP3C20MTL
Cord Type
Visual Fault Indication Light On
Listing and Standards
Codes
4 to 6 mA.
.025 sec. nominal.
60 Hz.
120V AC +10% – 15%. Incorporates no voltage release feature.
15A/20A.
2000A.
-35°C to 66°C or -30°F to 150°F.
95%.
High-impact, UV stabilized PVC. UL 94V-0 flammability classification.
Meets UL and CSA watertight requirements. Adhesive bonded.
14/3 SJTW-A (UL), SJTW (CSA). Except GFP3C20M, GFP3C15MTL and
GFP3C20MTL are 12/3 SJTW.
Indicates fault.
Meets UL943 Class A, UL File E41978, CSA Certified.
Meets all NEC® and CEC requirements.
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
K-14
®
Wiring Device-Kellems
www.hubbell-wiring.com
Ground Fault Products
Portable GFCI Line Cords
Commercial Grade, Automatic and Manual Set
Circuit Guard® Portable GFCI Single Outlet - 12/3 SJEOW
15A 120V AC
Description
Catalog Number
2' (60.9 cm) GFCI line cord, automatic set.
GFP2CA
2' (60.9 cm) GFCI line cord, manual set.
GFP2CM
25' (762.0 cm) GFCI line cord, automatic set.
GFP25CA
25' (762.0 cm) GFCI line cord, manual set.
GFP25CM
Circuit Guard® Portable GFCI Triple Tap Outlet - 12/3 SJEOW
15A 120V AC
Description
Catalog Number
2' (60.9 cm) GFCI line cord, automatic set.
GFP2TTA
2' (60.9 cm) GFCI line cord, manual set.
GFP2TTM
25' (762.0 cm) GFCI line cord, automatic set.
GFP25TTA
25' (762.0 cm) GFCI line cord, manual set.
GFP25TTM
Circuit Guard® OEM Equipment Integrated Cord Sets - 14/3 SJEOW
15A 120V AC
Description
Catalog Number
15' (457.2 cm) GFCI with flying leads, automatic set.
GFP15LA
15' (457.2 cm) GFCI with flying leads, manual set.
GFP15LM
35' (1066.8 cm) GFCI with flying leads, automatic set.
GFP35LA
35' (1066.8 cm) GFCI with flying leads, manual set.
GFP35LM
15A GFCI In Line GFCI, Single and Triple Tap - 12/3 SJTW
15A 120V AC
Description
Catalog Number
2' (60.9 cm), 5-15 single tap, automatic set.
GFPIL15125A
2' (60.9 cm), 5-15 single tap, manual set.
GFPIL15125M
2' (60.9 cm), 5-15 triple tap, automatic set.
GFPIL15125TRIA
2' (60.9 cm), 5-15 triple tap, manual set.
GFPIL15125TRIM
20A GFCI In Line GFCI, Locking - 12/3 SJTW
20A 120V AC
Description
Catalog Number
2' (60.9 cm), L5-20 locking, automatic set.
GFPIL20125LKA
2' (60.9 cm), L5-20 locking, manual set.
GFPIL20125LKM
20A GFCI In Line GFCI, Locking - 12/3 SJTW
20A 250V AC
Description
Catalog Number
2' (60.9 cm), L6-20 locking, automatic set.
GFPIL20250LKA
2' (60.9 cm), L6-20 locking, manual set.
GFPIL20250LKM
GFP2CA
GFP2TTA
GFP15LA
GFPIL15125TRIM
Specifications
Portable GFCI Line Cords
Trip Level
Trip Time
Frequency
Voltage
Amperage
Maximum Interrupting Capacity
Operating Temperature
Maximum Humidity
Housing
Visual Fault Indication Light On
Listing and Standards
Codes
4 to 6 mA.
.025 sec. nominal.
60 Hz.
120/250V AC +10% - 15%. Incorporates no voltage release feature.
15A/20A.
2000A.
-35°C to 66°C or -30°F to 150°F.
95%.
High-impact, UV stabilized PVC. UL 94V-0 flammability classification.
Meets UL and CSA watertight requirements. Adhesive bonded.
Indicates fault.
Meets UL943 Class A, UL File E41978, CSA Certified.
Meets all NEC® and CEC requirements.
GFPIL20125LKA
GFPIL20125LKM
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
www.hubbell-wiring.com
®
Wiring Device-Kellems
K-15
Ground Fault Products
Portable GFCI Line Cords
Multiple Outlet Portable GFCI and GFCI Module
IP21
SUITABILITY
Multiple Outlet Portable GFCI
Description
Rating
Receptacles
Plug
Catalog Number
4 outlet,
manual set, yellow.
15A, 120V AC
(2) Duplex 5-15R
NEMA 5-15P
GFP15M
4 outlet,
manual set, yellow.
20A, 120V AC
(2) Duplex 5-20R
NEMA 5-20P
GFP20M
GFP15M
GFCI Module - UL Type 3R Rated
Description
Rating
Catalog Number
GFCI module,
manual set, yellow.
20A, 120V AC, 60 Hz
GFM20
GFCI module,
auto set, yellow.
20A, 120V AC, 60 Hz
GFM20A
GFM20
Specifications
Trip Level
Trip Time
Frequency
Voltage
Maximum Interrupting Capacity
Current
Operating Temperature
Housing Rating
Input
Output
Power Supply Cord
Mounting Screws
Power “ON” Indication
Agency Approvals
Codes
GFP15M / GFP20M
GFM20 / GFM20A
4 to 6 mA.
.025 sec. nominal.
60 Hz.
120V AC +10% - 15%.
No voltage release feature.
5000A.
15A / 20A.
-35°C to 66°C or -30°F to 150°F.
High-impact, yellow Valox®
with protective lift covers.
4 to 6 mA.
.025 sec. nominal.
60 Hz.
120V AC +10% - 15%.
No voltage release feature.
5000A.
20A / 20A Feed-through.
-35°C to 66°C or -30°F to 150°F.
High-impact, UV stabilized, rigid PVC.
UL 94V-0 flammability classification.
UL Type 3R Rated.
#12 AWG stranded conductors (black/white/green).
#12 AWG stranded conductors (red/gray).
N/A.
Self-tapping, combination, #6-32.
LED indicator light.
UL Listed, CSA Certified.
Meets UL943 Class A for GFCI’s.
Meets all NEC® and CEC requirements.
5-15P, 15A / 5-20P, 20A. IP21 Suitability.
5-15R(4), 15A / 5-20R(4), 20A.
6' (182.9 cm) STOW-A (STW FT2 CSA).
N/A.
LED indicator light.
UL Listed, UL498 for receptacles.
Meets UL943 Class A for GFCI’s.
Meets all NEC® and CEC requirements.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
K-16
®
Wiring Device-Kellems
www.hubbell-wiring.com
Ground Fault Products
Hard Wired 30 Ampere GFCI - NEMA 4X
Applications
Power Generators
Submersible Pumps
Textile
Agricultural Equipment
Cement Cutting Equipment
Food Processing
Production Assembly Equipment
Spa and Hot Tubs
Vending Equipment
Circuit Guard® Hard Wired 30A GFCI - UL Type 4X Rated
Automatic Reset GFCI
Description
Voltage
Alarm
Manual Set
Automatic Set
Hard wired, manual set
and automatic set GFCIs.
120V AC
120V AC
240V AC
240V AC
120/240V AC
3Ø 250V AC
3Ø 120/208V AC
None
Audible
None
Audible
Audible
None
None
GFHW13005
GFHW13015
GFHW23005
GFHW23015
GFHW33015
GFHW530
GFHW430
GFHW13105
GFHW13115
GFHW23105
GFHW23115
GFHW33115
GFHW531
GFHW431
Note: All units above are stock items.
Specifications
Manual Reset GFCI
Electrical Ratings
Rated Voltage
Operating Voltage Range
Current
Frequency
Trip Level
Phase
Response Time
Dielectric Withstand
Surge Withstand
Let Go Line Voltage
Grounded Neutral Detection
Power Up
120V AC, 240V AC and 120/240V, 3Ø 250V AC, 3Ø 120/208V AC.
85% to 110%.
Up to 30A or device rating.
60 Hz.
4-6 mA.
Single.
.025 sec. Max.
1500 VRMS across contact, 4000 VRMS between conductors and enclosure.
6000V impulse, 0.5 microseconds rise time 100kHz ringing frequency with
40% decay per cycle.
60% of rated.
6 Ohms or less.
Manual or automatic reset.
3.37"
(85.6)
4.80"
(121.9)
2.82"
(12.9)
Environmental Ratings
Housing Rating
Construction
Type
Operating Temperature
Leakage Current @ 93% Humidity
UL Type 4X.
Industrial grade design.
Class A GFCI.
-35°C to 66°C, -30°F to 150°F.
Zero.
.20 x 4
¾" N.P.T.
Dimensional Drawing
Features
Life (Endurance)
Grounded Neutral Protection
Power On Indicator
Power Off Indicator
Wiring Application
Switch Interface
Latching Mechanism
10,000 cycles (6000 with load and 4000 without load).
Open neutral protection Trips upon loss of neutral.
Trips if ground and neutral touch at load side.
Green light on.
Red blinking light plus optional audible alarm.
3 Wire Single Phase (Hot, Neutral and Ground),
4 Wire Single Phase (Line 1,Line 2, Neutral and Ground).
Double Insulated.
Electromagnetic.
2.64"
(67.1)
5.75"
(146.0)
Physical Specifications
Wire Leads
Unit Color
Label Color on Portable
and Hard Wired Units
Weight
#10 AWG, 24" long.
Gray with black cover.
Automatic reset: yellow background with black lettering.
Manual reset: black background with yellow lettering.
1.40 lbs.
Related Code
Confined Space
Construction Sites
Commercial Garages
Fountains
Spas and Hot Tubs
Marinas
www.hubbell-wiring.com
24.00"
(609.6)
OSHA 29 CFR 1926.404 (b) (1) (ii)
OSHA 29 CFR 1926.405 (a) (2) (ii) (G)
NEC 590.6
NEC 511.12
NEC 680.5B
NEC 680.40
NEC 555.3
Side View
Dimensions in Inches (mm)
®
Wiring Device-Kellems
K-17
Ground Fault Products
Portable 30 Ampere GFCI - NEMA 4X
Applications
Pressure Washers
De-icing Equipment
Pipeline Heaters
Portable Electric Heaters
Material Dryers
Automotive Garages
Portable Power Tools
Submersible Pumps
Outdoor Signage
GFP1311
Circuit Guard® Portable 30A GFCI - UL Type 4X Rated
Description
Cord Length
Voltage
Manual Set
Automatic Set
Portable, manual set and
automatic set GFCIs.
2' (60.9 cm)
6' (182.9 cm)
25' (762.0 cm)
50' (1524.0 cm)
2' (60.9 cm)
25' (762.0 cm)
6' (182.9 cm)
6' (182.9 cm)
6' (182.9 cm)
120V AC
120V AC
120V AC
120V AC
240V AC
240V AC
120/240V AC
3Ø 250V AC
3Ø 120/208V AC
GFP1301
GFP1305
GFP1302
GFP1303
GFP2301
GFP2302
GFP3305
GFP5305
GFP4305
GFP1311
GFP1315
GFP1312
GFP1313
GFP2311
GFP2312
GFP3315
GFP5315
GFP4315
GFPIL30250LKM
3.37"
(85.6)
Note: All units above are stock items.
Circuit Guard® 30A GFCI In Line GFCI – Locking
4.80"
(121.9)
Description
Cord Length
Voltage
Manual Set
Automatic Set
L5-30 locking.
L6-30 locking.
2' (60.9 cm)
2' (60.9 cm)
120V AC
250V AC
GFPIL30125LKM
GFPIL30250LKM
GFPIL30125LKA
GFPIL30250LKA
Plug and Connector Selector Chart (partial listing)
The chart below is a list of possible Hubbell plug and connector body products that can be used with the Hubbell
Portable GFCIs.
Dimensional Drawing
Family
Style
Insulgrip®
Insulgrip®
Watertight Safety-Shroud®
IEC Pin & Sleeve
Insulgrip® Pin & Sleeve
Hubbellock®
Straight Blade
Twist-Lock®
Twist-Lock®
Watertight Pin & Sleeve
Insulgrip® Pin & Sleeve
Hubbellock®
Amps
Voltage
15
30
30
30
30
20
120V AC
240V AC
240V AC
240V AC
240V AC
120V AC
Hubbell Catalog Number
HBL5266C & HBL5269C
HBL2621 & HBL2623
HBL2621SW & HBL2623SW
HBL330P6W & HBL330C6W
HBL330PS2W & HBL330CS2W
HBL23035B & HBL23032B
Specifications
Electrical Ratings
Rated Voltage
Operating Voltage Range
Current
Frequency
Trip Level
Response Time
Dielectric Withstand
Surge Withstand
Let Go Line Voltage
Power Up
Environmental Ratings
Housing Rating
Construction
Type
Operating Temperature
Leakage Current @ 93% Humidity
120V AC, 240V AC, 120/240V AC,
3Ø 250V AC, 3Ø 120/208V AC.
85% to 110%.
Up to 30A or device rating.
60 Hz.
4-6 mA.
25 mS Max.
1500 VRMS across contact, 4000 VRMS
between conductors and enclosure.
6000V impulse, 0.5 microseconds rise time
100kHz ringing frequency with 40% decay
per cycle.
60% of rated.
Manual or Automatic reset.
UL Type 4X.
Industrial grade design.
Meets UL943 Class A GFCI.
-35°C to 66°C, -30°F to 150°F.
Zero.
Switch interface
Latching Mechanism
Physical Specifications
Cord Type
Unit Color
Label Color on Portable
and Hard Wired Units
Weight
®
10,000 cycles (6000 with load and 4000 without load).
Trips upon loss of neutral.
Trips if ground and neutral touch at load side.
Green light on.
Red blinking light plus optional audible alarm.
3 Wire Single Phase (Hot, Neutral and Ground).
4 Wire Single Phase (Line 1, Line 2, Neutral and Ground).
Double Insulated.
Electromagnetic.
2-50', 10/3 SJGOOW. 100', 8/3 SEOW.
Gray with black cover.
Automatic reset: Yellow background with black
lettering. Manual reset: Black background
with yellow lettering.
2 ft. 1.8 lbs., 6 ft. 2.7 lbs., 25 ft. 6.8 lbs.,
50 ft. 12.4 lbs.,100 ft. 23.3 lbs.
Related Code
Confined Space
Construction Sites
Commercial Garages
Outdoor Signs
Spas and Hot Tubs
Boat Yards
Dimensions in Inches (mm)
K-18
Features
Life (Endurance)
Open Neutral Protection
Grounded Neutral Protection
Power On Indicator
Power Off Indicator
Wiring Application
Wiring Device-Kellems
OSHA 29 CFR 1926.404 (b) (1) (ii)
OSHA 29 CFR 1926.405 (a) (2) (ii) (G)
NEC 590.6
NEC 511.12
NEC 600.10
NEC 680.40
NEC 555.3
www.hubbell-wiring.com
Section L
Hospital Products
Index
Product
Page
HBL® Extra Heavy Duty
Industrial Series
HBL® Extra Heavy Duty Hospital Grade Duplex Receptacles
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-2
Duplex and Style Line® Decorator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-3
SNAPConnect® Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-4
Hubbell-PRO Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-6
Single and 4-PLEX® Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-8
USB Charger Receptacle Tamper-Resistant Duplex . . . . . . . . . . . . . . . . L-9
Hospital Grade Plugs, Connector Bodies and Receptacles
15 and 20A, 125V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-10
15 and 20A, 250V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-11
Industrial and Commercial
Series GFCIs
Hospital Grade GFCI Receptacles
Extra Heavy Duty Tamper-Resistant GFCI Receptacles . . . . . . . . . . . . L-12
Heavy Duty Tamper-Resistant GFCI Receptacles. . . . . . . . . . . . . . . . . L-13
GFCI Receptacles with Auto Grounding . . . . . . . . . . . . . . . . . . . . . . . . L-14
Heavy Duty SNAPConnect® GFCI LED Receptacles . . . . . . . . . . . . . . L-15
Hospital Grade Surge Protection Devices . . . . . . . . . . . . . . . . . . . . . . . L-16
Hubbellock® Plugs, Connectors and Receptacles . . . . . . . . . . . . . . . . . L-17
Hubbellock® Mobile X-Ray Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-18
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L-19
Surge Protection Devices
Hubbellock® Receptacles,
Plugs and Connectors
www.hubbell-wiring.com
®
Wiring Device-Kellems
L-1
Straight Blade Devices
HBL® Extra Heavy Duty Hospital Grade Duplex Receptacles
Features and Benefits
One-piece nickel-plated brass
integral ground strap for greater
corrosion resistance
Barbed assembly arms reduce
possibility of face/base separation
Patented ground contact provides
redundant grounding
Back wired ground terminal
allows faster, easier installation
Unique bypass contact design
results in greater contact force
and reduced heat buildup
RTP base offers greater heat
resistance, plus contact stability
Square head, 10-thread bronze
center rivet won’t rotate, reduces
stripping and resists corrosion
External bundling terminals contain
wire strands and are designed for
quick inspection
I.D. marking surface provides
quick, sure circuit identification
Deep body design increases
impact and chemical resistance
HBL8200GY
Hubbell “Hospital Grade” Devices
To qualify for the “Hospital Grade” designation and use of the
associated green dot symbol, UL requires that the manufacturer
design its devices to perform to specific levels. These levels form
an established baseline below which no manufacturer can fall
and still carry a green dot.
Hubbell sets their standards high. Each product is built to
withstand the severe conditions of abuse that are unique to the
hospital environment. Hubbell receptacles have exclusive design
features that set them apart from the competition.
L-2
• Exclusive nickel-plated bypass contact design increases contact
pressure, lowering the operating temperature.
• Four point grounding system provides redundant grounding for
low resistance ground continuity in high abuse areas.
• High tech reinforced thermoplastic polyester (RTP) back is tough
and heat resistant.
Because of these features and others, the benefit is performance,
reliability, and value for any health care facility.
One piece, nickel plated brass mounting
strap with integral ground contacts, along
with secondary ground contact, provides
superior grounding for low resistance flow of
fault currents as well as corrosion resistance.
Barbed locking arms keep the face locked in
place to diminish potential for face/base
separation. Back wired ground screw
reduces installation time.
Exclusive bypass contacts are made of
nickel-plated brass alloy. This design
increases blade retention forces, insuring
a reliable uninterrupted flow of power.
Reinforced thermoplastic back provides
superior thermal, electrical and mechanical
properties. By providing contact stability,
this high performance material will reduce
heat buildup giving you long lasting
performance.
External wiring clamps allow for visual
inspection of the terminals. A unique
strand containment feature on the terminal
“bundles” the wire, ensuring 100%
clamping of wire strands and reducing
heat from the termination.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
HBL®
IP20
SUITABILITY
Extra Heavy Duty
Hospital Grade Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Duplex
Description
Color
Catalog Number
Flush, thermoplastic polyester face,
back and side wired.
Black
Blue
Brown
Gray
Ivory
Light Almond
Red
White
HBL8200BK
–
HBL8200
HBL8200GY
HBL8200I
HBL8200LA
HBL8200RED
HBL8200W
–
HBL8300BL
HBL8300
HBL8300GY
HBL8300I
HBL8300LA
HBL8300RED
HBL8300W
Flush, LED illuminated face,
back and side wired.
Gray
Ivory
Red
White
HBL8200ILGY
HBL8200ILI
HBL8200ILR
HBL8200ILW
HBL8300ILGY
HBL8300ILI
HBL8300ILR
HBL8300ILW
Tamper-Resistant receptacle
with wire leads. Complies with
requirements of NEC® article
517-18(c).
Brown
Gray
Ivory
Light Almond
Red
White
HBL8200SGA
HBL8200SGGYA
HBL8200SGIA
HBL8200SGLA
HBL8200SGRA
HBL8200SGWA
HBL8300SGA
HBL8300SGGYA
HBL8300SGIA
HBL8300SGLA
HBL8300SGRA
HBL8300SGWA
Isolated ground∆.
Orange
Red
IG8200
IG8200R
IG8300
IG8300R
HBL8200GY
HBL8300SGA
MRI Receptacle, Duplex
Description
Color
Catalog Number
MRI receptacle, flush, thermoplastic
polyester face, back and side wired.
Ivory
Light Almond
Red
White
HBL8200IMRI
HBL8200LAMRI
HBL8200RMRI
HBL8200WMRI
HBL8300IMRI
HBL8300LAMRI
HBL8300RMRI
HBL8300WMRI
Slender/Compact, Duplex
Description
Color
Catalog Number
Flush, thermoplastic polyester face,
back, and side wired.
Fed. Spec. verified.
Brown
Gray
Green
Ivory
Light Almond
Red
White
HBL8200H
HBL8200HG
–
HBL8200HI
HBL8200HLA
HBL8200HRED
HBL8200HW
HBL8300H
HBL8300HG
HBL8300HGN
HBL8300HI
HBL8300HLA
HBL8300HRED
HBL8300HW
HBL8300RMRI
Style Line® Decorator*
Description
Color
Catalog Number
Flush, nylon face,
back and side wired.
Brown
Gray
Ivory
Office White
Red
White
HBL2172
HBL2172GY
HBL2172I
–
HBL2172R
HBL2172WA
Isolated ground∆.
Ivory
Orange
White
HBL2182
HBL2182GY
HBL2182I
HBL2182OW
HBL2182R
HBL2182WA
–
–
–
HBL8200ILW
IG2182I
IG2182
IG2182WA
Note: ∆See section M for additional information on isolated ground devices.
*Not Fed. Spec. Listed.
See page A-46 and A-47 for accessories.
See page L-19 for technical information.
See page Tech-10 for Tamper-Resistant description.
See section N for wallplates.
HBL2172
NEC®
is a registered trademark of the National Fire Protection Association (NFPA).
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
L-3
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
IP20
Extra Heavy Duty
Hospital Grade SNAPConnect®
SUITABILITY
1.56"
(39.7)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Duplex
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP8300WA
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
Description
Color
Catalog Number
Hospital grade, finder groove, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA*.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKA*
SNAP8200A*
SNAP8200GYA*
SNAP8200IA*
SNAP8200LAA*
SNAP8200RA*
SNAP8200WA*
SNAP8300BKA*
SNAP8300A*
SNAP8300GYA*
SNAP8300IA*
SNAP8300LAA*
SNAP8300RA*
SNAP8300WA*
Hospital grade, Tamper-Resistant,
smooth nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKTR
SNAP8200TR
SNAP8200GYTR
SNAP8200ITR
SNAP8200LATR
SNAP8200RTR
SNAP8200WTR
SNAP8300BKTR
SNAP8300TR
SNAP8300GYTR
SNAP8300ITR
SNAP8300LATR
SNAP8300RTR
SNAP8300WTR
Isolated ground∆, Hospital grade,
Tamper-Resistant.
Orange
Red
SNAP8200IGTR
SNAP8200RIGTR
SNAP8300IGTR
SNAP8300RIGTR
Hospital grade, with Power Indicating LED,
smooth nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKL
SNAP8200L
SNAP8200GYL
SNAP8200IL
SNAP8200LAL
SNAP8200RL
SNAP8200WL
SNAP8300BKL
SNAP8300L
SNAP8300GYL
SNAP8300IL
SNAP8300LAL
SNAP8300RL
SNAP8300WL
Isolated ground∆, Hospital grade,
with Power Indicating LED.
Orange
Red
SNAP8200IGL
SNAP8200RIGL
SNAP8300IGL
SNAP8300RIGL
Hospital grade, Tamper-Resistant,
with Power Indicating LED,
smooth nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP8200BKLTR
SNAP8200LTR
SNAP8200GYLTR
SNAP8200ILTR
SNAP8200LALTR
SNAP8200RLTR
SNAP8200WLTR
SNAP8300BKLTR
SNAP8300LTR
SNAP8300GYLTR
SNAP8300ILTR
SNAP8300LALTR
SNAP8300RLTR
SNAP8300WLTR
Isolated ground∆, Hospital grade,
TR with Power Indicating LED.
Orange
Red
SNAP8200IGLTR
SNAP8200RIGLTR
SNAP8300IGLTR
SNAP8300RIGLTR
* For Assembled in USA receptacles drop off the
last “A” and add suffix NA. Ex: SNAP8200BKNA.
SNAP8300LATR
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP8300L
Note: ∆See section M additional information on isolated ground devices.
See page A-14 for additional information on SNAPConnect® features.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See pages A-46 and A-47 for accessories.
See page L-20 for technical information.
See section N for wallplates.
Consult factory for available Split-Circuit capable SNAPConnect® devices.
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
SNAPConnect® Right Angle Pigtailed Connector
.86"
(21.9)
SNAP8300RLTR
.78"
(19.8)
1.48"
(37.6)
Description
Wire Type
General Use
Catalog Number
Assembled in USA
Catalog Number
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate
housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
Note: For Assembled in USA products, must order connector with NA suffix.
See page L-20 for technical information.
.63"
(16.0)
SNAP1RA
Dimensions in Inches (mm)
L-4
Many of these products are Assembled in USA, as indicated, and many are Buy
American Compliant. Please contact Hubbell with any certification requirements.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
IP20
Extra Heavy Duty
Hospital Grade SNAPConnect®
SUITABILITY
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
1.64"
(41.7)
Style Line® Decorator
Description
Color
Catalog Number
Hospital grade, Style Line® decorator,
flush, nylon face, modular receptacle
which requires pigtailed connector below.
Assembled in USA*.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKA*
SNAP2172A*
SNAP2172GYA*
SNAP2172IA*
SNAP2172LAA*
SNAP2172RA*
SNAP2172WA*
SNAP2182BKA*
SNAP2182A*
SNAP2182GYA*
SNAP2182IA*
SNAP2182LAA*
SNAP2182RA*
SNAP2182WA*
Hospital grade, Tamper-Resistant,
Style Line® decorator, flush, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKTR
SNAP2172TR
SNAP2172GYTR
SNAP2172ITR
SNAP2172LATR
SNAP2172RTR
SNAP2172WTR
SNAP2182BKTR
SNAP2182TR
SNAP2182GYTR
SNAP2182ITR
SNAP2182LATR
SNAP2182RTR
SNAP2182WTR
Isolated ground∆, Hospital grade,
Tamper-Resistant.
Orange
Red
SNAP2172IGTR
SNAP2172RIGTR
SNAP2182IGTR
SNAP2182RIGTR
Hospital grade, with Power Indicating LED,
Style Line® decorator, flush, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKL
SNAP2172L
SNAP2172GYL
SNAP2172IL
SNAP2172LAL
SNAP2172RL
SNAP2172WL
SNAP2182BKL
SNAP2182L
SNAP2182GYL
SNAP2182IL
SNAP2182LAL
SNAP2182RL
SNAP2182WL
Isolated ground∆, Hospital grade,
with Power Indicating LED.
Orange
Red
SNAP2172IGL
SNAP2172RIGL
SNAP2182IGL
SNAP2182RIGL
Hospital grade, Tamper-Resistant,
with Power Indicating LED,
Style Line® decorator, flush, nylon face,
modular receptacle which requires
pigtailed connector below.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
SNAP2172BKLTR
SNAP2172LTR
SNAP2172GYLTR
SNAP2172ILTR
SNAP2172LALTR
SNAP2172RLTR
SNAP2172WLTR
SNAP2182BKLTR
SNAP2182LTR
SNAP2182GYLTR
SNAP2182ILTR
SNAP2182LALTR
SNAP2182RLTR
SNAP2182WLTR
Isolated ground∆, Hospital grade,
TR with Power Indicating LED.
Orange
Red
SNAP2172IGLTR
SNAP2172RIGLTR
SNAP2182IGLTR
SNAP2182RIGLTR
* For Assembled in USA receptacles drop off the
last “A” and add suffix NA. Ex: SNAP2172BKNA.
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP2182A
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP2182ITR
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP2182RL
Note: ∆See section M additional information on isolated ground devices.
See page A-14 for additional information on SNAPConnect® features.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See pages A-46 and A-47 for accessories.
See page L-20 for technical information.
See section N for wallplates.
Consult factory for available Split-Circuit capable SNAPConnect® devices.
1.64"
(41.7)
2.62"
(66.5)
3.28"
(83.3)
SNAPConnect® Right Angle Pigtailed Connector
Description
Wire Type
General Use
Catalog Number
Assembled in USA
Catalog Number
Clear right angle terminal with 6 inch leads
#12 AWG THHN/THWN-2; Polycarbonate
housing material
Solid
Stranded
SNAP1RA
SNAP2RA
SNAP1RNA
SNAP2RNA
.86"
(21.9)
SNAP2182GYLTR
.78"
(19.8)
Note: For Assembled in USA products, must order connector with NA suffix.
See page L-20 for technical information.
1.48"
(37.6)
.63"
(16.0)
Many of these products are Assembled in USA, as indicated, and many are Buy
American Compliant. Please contact Hubbell with any certification requirements.
www.hubbell-wiring.com
®
Wiring Device-Kellems
SNAP1RA
Dimensions in Inches (mm)
L-5
Hospital Products
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Hubbell-PRO Features
Automatic self-grounding staple
Combination Tamper-Resistant and
LED for pediatric emergency circuits
Nylon face and base construction
Circuit ID marking area
Back and side wiring
Tri drive screws
Steel mounting strap
8200REDLTR
1.57"
(39.9)
Hubbell-PRO Heavy Duty
Hospital Grade Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Duplex
2.73"
(69.3)
3.28"
(83.3)
1.15"
(29.1)
Description
Color
Catalog Number
Hospital grade,
smooth nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
8200BK
8200
8200GY
8200IV
8200LA
8200RED
8200WHI
8300BK
8300
8300GY
8300IV
8300LA
8300RED
8300WHI
Hospital grade, Tamper-Resistant,
smooth nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
8200BKTR
8200TR
8200GYTR
8200IVTR
8200LATR
8200REDTR
8200WTR
8300BKTR
8300TR
8300GYTR
8300IVTR
8300LATR
8300REDTR
8300WTR
Hospital grade,
with Power Indicating LED,
smooth nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
8200BKL
8200L
8200GYL
8200IVL
8200LAL
8200REDL
8200WL
8300BKL
8300L
8300GYL
8300IVL
8300LALM
8300REDL
8300WL
Hospital grade, Tamper-Resistant,
with Power Indicating LED,
smooth nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
8200BKLTR
8200LTR
8200GYLTR
8200IVLTR
8200LALTR
8200REDLTR
8200WLTR
8300BKLTR
8300LTR
8300GYLTR
8300IVLTR
8300LALTR
8300REDLTR
8300WLTR
8200LA
1.57"
(39.9)
2.73"
(69.3)
3.28"
(83.3)
1.15"
(29.1)
8200TR
1.57"
(39.9)
3.28"
(83.3)
2.73"
(69.3)
1.15"
(29.1)
8200REDLTR
Dimensions in Inches (mm)
L-6
Note: See pages A-46 and A-47 for accessories.
See page L-21 for technical information.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See section N for wallplates.
The products listed on this page are Assembled in USA, and many are Buy American
Compliant. Please contact Hubbell with any certification requirements.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hospital Products
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Hubbell-PRO Features
Automatic self-grounding staple
Combination Tamper-Resistant and
LED for pediatric emergency circuits
Nylon face and base construction
Back and side wiring
Tri drive screws
Steel mounting strap
2182IVLTR
Hubbell-PRO Heavy Duty
Hospital Grade Receptacles
1.57"
(39.9)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Style Line® Decorator
Description
Color
Catalog Number
Hospital grade,
Style Line® decorator,
flush, nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
2172BK
2172
2172GY
2172IV
2172LA
2172RED
2172W
2182BK
2182
2182GY
2182IV
2182LA
2182RED
2182W
Hospital grade, Tamper-Resistant,
Style Line® decorator,
flush, nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
2172BKTR
2172TR
2172GYTR
2172IVTR
2172LATR
2172REDTR
2172WTR
2182BKTR
2182TR
2182GYTR
2182IVTR
2182LATR
2182REDTR
2182WTR
Hospital grade,
with Power Indicating LED,
Style Line® decorator,
flush, nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
2172BKL
2172L
2172GYL
2172IVL
2172LAL
2172REDL
2172WL
2182BKL
2182L
2182GYL
2182IVL
2182LAL
2182REDL
2182WL
Hospital grade, Tamper-Resistant,
with Power Indicating LED,
Style Line® decorator,
flush, nylon face,
back and side wired.
Assembled in USA.
Black
Brown
Gray
Ivory
Light Almond
Red
White
2172BKLTR
2172LTR
2172GYLTR
2172IVLTR
2172LALTR
2172REDLTR
2172WLTR
2182BKLTR
2182LTR
2182GYLTR
2182IVLTR
2182LALTR
2182REDLTR
2182WLTR
Note: See pages A-46 and A-47 for accessories.
See page L-21 for technical information.
See page Tech-10 for Tamper-Resistant and LED Power Indicators description.
See section N for wallplates.
1.15"
(29.1)
2172LATR
1.57"
(39.9)
2.73"
(69.3)
3.28"
(83.3)
1.15"
(29.1)
2172L
1.57"
(39.9)
2.73"
(69.3)
3.28"
(83.3)
1.15"
(29.1)
The products listed on this page are Assembled in USA, and many are Buy American
Compliant. Please contact Hubbell with any certification requirements.
www.hubbell-wiring.com
2.73"
(69.3)
3.28"
(83.3)
®
Wiring Device-Kellems
2182IVLTR
Dimensions in Inches (mm)
L-7
Hospital Products
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
1.63"
(41.4)
3.28"
(83.3)
1.94"
(49.3)
1.19"
(30.2)
HBL8210GY
.92”
(23.4)
SUITABILITY
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Description
Color
Catalog Number
Flush, nylon face,
back and side wired,
Fed. Spec. verified.
Almond
Brown
Gray
Ivory
Red
White
–
HBL8210
HBL8210GY
HBL8210I
HBL8210R
HBL8210W
HBL8310AL
HBL8310
HBL8310GY
HBL8310I
HBL8310R
HBL8310W
Panel mount on 1.94 in.
(49.2) centers.
Brown
Ivory
HBL8284
HBL8284I
–
HBL8384I
Isolated ground∆.
Orange
IG8210
IG8310
Note:
∆See
section M for additional information on isolated ground devices.
.1”
(2.5)
4-PLEX®
Hospital Grade
4.30” sq.
(109.2)
3.02” (76.7)
3.38” (85.9)
Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Description
Color
Catalog Number
4 outlet high impact resistant
Polycarbonate construction.
Mount to 4 in. square box.
Brown
Gray
Ivory
Red
White
HBL415H
–
HBL415HI
HBL415HR
HBL415HW
HBL420H
HBL420HGY
HBL420HI
HBL420HR
HBL420HW
4-PLEX adapter plates for
1- and 2-gang, device boxes.
Brown
Gray
Ivory
Red
White
HBL4AP
HBL4APGY
HBL4API
HBL4APR
HBL4APW
HBL4AP
HBL4APGY
HBL4API
HBL4APR
HBL4APW
HBL415HI
.38" (9.7)
3.28"
(83.3)
4.78"
(121.4)
IP20
HBL® Extra Heavy Duty
Hospital Grade
Single Receptacles
Note: See page A-23 for additional information on 4-PLEX devices.
See page A-60 for technical information.
4-PLEX devices are not Fed. Spec. Listed.
.19" (4.8)
2.75"
(69.9)
1.75"
(44.5 )
3.38"sq. (85.9)
HBL4API
Dimensions in Inches (mm)
L-8
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hospital Products
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
USB Charger Tamper-Resistant Duplex Receptacle
Hubbell’s USB Charger Receptacle provides both USB and AC electrical power in a standard single gang electrical opening. Designed to
provide more charging options for personal electronics.
Typical Applications
Ideal for use in renovation, new construction and to add capacity for USB charging. Especially suited for use in hotels, hospitals, schools,
offices, homes and more.
Hotels
Healthcare
Schools
Offices
Capability to charge wide range
of devices including:
• Tablets
• Smartphones
• MP3 players
• Apple® iPad®
• Apple® iPod®
• Apple® iPhone®
Residential
Automatic self-grounding staple
Tamper-Resistant decorator duplex
Green LED indicator to show
USB power available
Back and side wire for solid or
stranded wire
Two USB ports
3 Amps, 5 Volt DC
• Complies with battery charging specification
USB BC1.2
• Compatible with USB 1.1/2.0/3.0 devices,
including Apple® products
Impact and chemical resistant
• Complies with Part 15 of the FCC rules
Flush fit design
• cULus listed to UL498 and UL1310
USB8300W
USB Charger Tamper-Resistant
Hospital Grade Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Description
Color
15A 125V AC
20A 125V AC
USB Charger Tamper-Resistant receptacle,
Two USB Type 2.0 ports 3 Amp, 5 Volt DC,
15 or 20 Amp, 125 Volt AC decorator duplex.
Black
Brown
Gray
Ivory
Light Almond
Red
White
USB8200BK
USB8200
USB8200GY
USB8200I
USB8200LA
USB8200R
USB8200W
USB8300BK
USB8300
USB8300GY
USB8300I
USB8300LA
USB8300R
USB8300W
Note: See page A-18 for standard USB charger.
See page Tech-10 for Tamper-Resistant description.
3.28"
(83.3)
2.62"
(66.5)
1.96"
(49.9)
USB8300W
Apple, iPad, iPod and iPhone are registered trademarks of Apple, inc.
www.hubbell-wiring.com
1.75"
(44.5)
Dimensions in Inches (mm)
®
Wiring Device-Kellems
L-9
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
IP20
G
G
W
W
SUITABILITY
Hospital Grade
15A 125V
NEMA 5-15P
UL CSA
Plugs
20A 125V
NEMA 5-20P
UL CSA
Insulgrip®
HBL8215C
Description
Cord Diameter
Catalog Number
Black and white nylon.
.230"-.720" (5.8-18.3)
HBL8215C
Transparent housing.
.230"-.720" (5.8-18.3)
HBL8215CT
HBL8315CT
8 position angle plug,
transparent housing.
.250"-.655" (6.4-16.6)
HBL8215CAT*
HBL8315CAT*
Description
Cord Diameter
Catalog Number
White nylon.
.300"-.660" (7.6-16.8)
HBL8115V
Insulation displacement,
white nylon.
.300"-.360" (7.6-9.1)
HBL8013V*
HBL8315C
Valise®
HBL8364V
−
Note: *Not Fed. Spec. Listed.
See page A-47 for accessories.
See pages L-23 and L-24 for technical information.
IP20
SUITABILITY
HBL8115V
Hospital Grade
Connector Bodies
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Insulgrip®
Description
Cord Diameter
Catalog Number
Black and white nylon.
.230"-.720" (5.8-18.3)
HBL8219C
HBL8319C
Transparent housing.
.230"-.720" (5.8-18.3)
HBL8219CT
HBL8319CT
Valise®
HBL8219C
Description
Cord Diameter
Catalog Number
White nylon.
.300"-.660" (7.6-16.8)
HBL8119V
–
Note: See page A-47 for accessories.
See pages L-23 and L-24 for technical information.
HBL8219CT
Dimensions in Inches (mm)
L-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
Straight Blade Devices
15 and 20 Ampere, 250 Volts
2 Pole, 3 Wire Grounding
G
G
IP20
SUITABILITY
Hospital Grade
15A 250V
NEMA 6-15P
UL CSA
1.5 HP
Plugs
20A 250V
NEMA 6-20P
UL CSA
2 HP
Valise®
Description
Cord Diameter
Catalog Number
Valise plug, white nylon.
.300"-.660" (7.6-16.8)
HBL8666V
HBL8464V
Note: HP ratings listed above are based on 208 to 240V AC only.
HBL8666V
G
Hospital Grade
HBL®
G
15A 250V
NEMA 6-15R
UL CSA
1.5 HP
Receptacles
20A 250V
NEMA 6-20R
UL CSA
2 HP
Extra Heavy Duty, Duplex
Description
Color
Catalog Number
Flush, thermoplastic polyester
face, back and side wired,
multiple drive screws.
Brown
Ivory
HBL8600
HBL8600I
HBL8400
HBL8400I
Note: See page A-46 for accessories.
See section N for wallplates.
HBL8600I
G
Hospital Grade
20A 250V
NEMA 6-20R
UL CSA
2 HP
Connector Bodies
Valise®
Description
Cord Diameter
Catalog Number
White nylon.
.300"-.660" (7.6-16.8)
HBL8469V
HBL8469V
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
L-11
Hospital Products
Extra Heavy Duty GFCI Receptacles
Tamper-Resistant and Weather Resistant
Meets UL Standard 943
Class A GFCI
10kA Short Circuit Current Rating
Limits improper access to energized contacts
• Exclusive patented tamper-resistant
protection through switching technology
Continually tests and monitors for people
protection automatically
• Patented self test diagnostics
Power indication
• Steady "ON" GREEN LED provides
indication of power
Ground fault indicator
• Steady “ON” RED LED provides visual
indication of a ground fault condition;
flashing red indicates device has lost
capability to provide protection
No power at face if reverse wired
• Open circuit condition eliminates false
assumption of protection at face
GFR8300SGI
Durable face with V-0 flammability rating
• Polyester face cover
Hospital Grade AUTOGUARD®
Self Test GFCI Receptacles
Tamper-Resistant and Weather Resistant
Description
Rating
Flush, polyester face,
back and side wired,
multiple drive screws.
15 and 20A
125V AC
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Color
Catalog Number
Black
Brown
Gray
Ivory
Red
White
GFR8200SGBK
GFR8200SG
GFR8200SGGY
GFR8200SGI
GFR8200SGR
GFR8200SGW
GFR8300SGBK
GFR8300SG
GFR8300SGGY
GFR8300SGI
GFR8300SGR
GFR8300SGW
GFR8300SGW
Hospital Grade CircuitGuard®
GFCI Receptacles
Tamper-Resistant and Weather Resistant
Description
Rating
Flush, polyester face,
back and side wired,
multiple drive screws.
GFR8300RTR
L-12
15 and 20A
125V AC
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Color
Catalog Number
Black
Brown
Gray
Ivory
Red
White
GFR8200BKTR
GFR8200TR
GFR8200GYTR
GFR8200ITR
GFR8200RTR
GFR8200WTR
20A 125V
NEMA 5-20R
UL CSA
1 HP
GFR8300BKTR
GFR8300TR
GFR8300GYTR
GFR8300ITR
GFR8300RTR
GFR8300WTR
Note: GFCI type receptacles should not be used in critical care patient areas or for electrical life support equipment applications because of
the possibility of power interruption. All GFCI receptacles listed above are furnished with both a matching color nylon wallplate,
and a SS26 302/304 super stainless steel wallplate. 20 amp feed-through capability.
See page Tech-10 for Tamper and Weather Resistant descriptions.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hospital Products
Heavy Duty GFCI Receptacles Tamper-Resistant
and Weather Resistant with Auto Grounding
Meets UL Standard 943
Class A GFCI
10kA Short Circuit Current Rating
Limits improper access to energized contacts
• Patented shutter design for tamperresistant protection
No power at face if reverse wired
• Open circuit condition eliminates false
assumption of protection at face
Ground fault EOL indicator
• Flashing RED indicates device has lost
capability to provide protection
Accepts fork terminals
• Open terminal design
Installation ease
• Internal back wiring
• Automatic self-grounding staple
• Captive mounting screws
GFR8300HITR
Hospital Grade Circuit Guard®
GFCI Receptacles
Tamper-Resistant and Weather Resistant
Description
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple.
Rating
15 and 20A
125V AC
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFR8200HBKTR
GFR8200HTR
GFR8200HGYTR
GFR8200HITR
GFR8200HLATR
GFR8200HRTR
GFR8200HWTR
GFR8300HBKTR
GFR8300HTR
GFR8300HGYTR
GFR8300HITR
GFR8300HLATR
GFR8300HRTR
GFR8300HWTR
GFR8200HGYTR
Hospital Grade
Tamper-Resistant and Weather Resistant
Assembled in USA
Description
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple.
Assembled in USA.
Rating
15 and 20A
125VAC
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFR8200HBKTRU
GFR8200HTRU
GFR8200HGYTRU
GFR8200HITRU
GFR8200HLATRU
GFR8200HRTRU
GFR8200HWTRU
GFR8300HBKTRU
GFR8300HTRU
GFR8300HGYTRU
GFR8300HITRU
GFR8300HLATRU
GFR8300HRTRU
GFR8300HWTRU
Note: GFCI type receptacles should not be used in critical care patient areas or for electrical life support equipment applications because of
the possibility of power interruption. All GFCI receptacles listed above are furnished with a matching color nylon wallplate. 20 amp
feed-through capability.
See page Tech-10 for Tamper and Weather Resistant descriptions.
GFR8300HTRU
Many of these products are Assembled in USA, as indicated, and many are Buy American
Compliant. Please contact Hubbell with any certification requirements.
www.hubbell-wiring.com
®
Wiring Device-Kellems
L-13
Hospital Products
Heavy Duty GFCI Receptacles LED with Auto Grounding
and Assembled in USA GFCI LED Receptacles
10kA Short Circuit Current Rating
Comprehensive diagnostics
• When test button is actuated, both the
electronic components and mechanical
trip mechanism are functionally tested
Ground fault EOL indicator
• Flashing RED indicates device has lost
capability to provide protection
No power at face if reverse wired
• Open circuit condition eliminates false
assumption of protection at face
Installation ease
• Internal back wiring
• Automatic self-grounding staple
• Captive mounting screws
GFR8200HILA
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Hospital Grade
Circuit Guard® GFCI Receptacles
Description
Rating
Flush, nylon face,
back and side wired,
multiple drive screws,
self-grounding staple.
GFR8200HWLA
15 and 20A
125V AC
20A 125V
NEMA 5-20R
UL CSA
1 HP
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFR8200HBKLA
GFR8200HLA
GFR8200HGYLA
GFR8200HILA
GFR8200HLAA
GFR8200HRLA
GFR8200HWLA
GFR8300HBKLA
GFR8300HLA
GFR8300HGYLA
GFR8300HILA
GFR8300HLAA
GFR8300HRLA
GFR8300HWLA
Note: GFCI type receptacles should not be used in critical care patient areas or for electrical life support equipment applications because of
the possibility of power interruption. All GFCI receptacles listed above are furnished with a matching color nylon wallplate. 20 amp
feed-through capability.
Hospital Grade GFCI LED
Assembled in USA
Description
Rating
Hospital Grade , impact
resistant flush nylon face,
back and side wired,
self-grounding staple.
Assembled in USA.
GFR8300HRLU
15 and 20A
125V AC
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFR8200HBKLU
GFR8200HLU
GFR8200HGYLU
GFR8200HILU
GFR8200HLALU
GFR8200HRLU
GFR8200HWLU
GFR8300HBKLU
GFR8300HLU
GFR8300HGYLU
GFR8300HILU
GFR8300HLALU
GFR8300HRLU
GFR8300HWLU
GFCI Receptacle Specifications per GFCI Products Listed (Pages L-12 to L-15)
Trip Level
Trip Time
Frequency
Voltage
Amperage
Maximum Interrupting Capacity
Operating Temperature
Maximum Humidity
Listings and Standards
Codes
4 to 6 mA.
.025 second nominal.
60 Hz.
120V AC +10% - 15% (102V to 132V).
15A/20A, 20A Feed Thru.
10,000A.
-35°C to 66°C or -30°F to 150°F.
95%.
Meets UL498 for receptacles, UL943 Class A for GFCIs UL File E41978. CSA Certified.
Meets all NEC® and CEC requirements. NEMA WD-6 ANSI 73.
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
Many of these products are Assembled in USA, as indicated, and many are Buy American
Compliant. Please contact Hubbell with any certification requirements.
L-14
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hospital Products
SNAPConnect® Heavy Duty GFCI Receptacles
Assembled in USA
Meets UL Standard 943
Class A GFCI
SNAPConnect® GFCI Features
Audible SNAP, indicates solid connection
• Secure, easy grip latch
Inspection of power contacts
• Clear terminal housing
• No exposed metal
Ground fault EOL indicator
• Flashing RED indicates device has
lost capability to provide protection
Requires minimal box space
• Compact size
• Clean finished look
Installation ease
• Automatic self-grounding staple
GFR8300SNAPINA
Hospital Grade SNAPConnect® GFCI LED
Assembled in USA
Description
SNAPConnect®
GFCI,
self-grounding staple.
Assembled in USA.
Rating
15 and 20A
125V AC
Requires connector below,
sold separately.
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFR8200SNAPBKNA
GFR8200SNAPNA
GFR8200SNAPGYNA
GFR8200SNAPINA
GFR8200SNAPLANA
GFR8200SNAPRNA
GFR8200SNAPWNA
GFR8300SNAPBKNA
GFR8300SNAPNA
GFR8300SNAPGYNA
GFR8300SNAPINA
GFR8300SNAPLANA
GFR8300SNAPRNA
GFR8300SNAPWNA
GFR8200SNAPWNA
Hospital Grade SNAPConnect® GFCI LED
Tamper and Weather Resistant, Assembled in USA
Description
SNAPConnect®
GFCI TR/WR,
self-grounding staple.
Assembled in USA.
Rating
15 and 20A
125V AC
Requires connector below,
sold separately.
Color
Catalog Number
Black
Brown
Gray
Ivory
Light Almond
Red
White
GFTR8200SNAPBKNA
GFTR8200SNAPNA
GFTR8200SNAPGYNA
GFTR8200SNAPINA
GFTR8200SNAPLANA
GFTR8200SNAPRNA
GFTR8200SNAPWNA
GFTR8300SNAPBKNA
GFTR8300SNAPNA
GFTR8300SNAPGYNA
GFTR8300SNAPINA
GFTR8300SNAPLANA
GFTR8300SNAPRNA
GFTR8300SNAPWNA
Buy American
Catalog Number
SNAP1RNA
SNAP2RNA
SNAPConnect® Right Angle Pigtailed Connector
Description
Wire Type
General Use
Catalog Number
Clear right angle terminal with 6 inch leads,
600V, #12 AWG THHN/THWN-2,
Polycarbonate housing material.
Solid
Stranded
SNAP1RA
SNAP2RA
GFTR8300SNAPGYNA
Note: For Assembled in USA products, must order connector with NA suffix.
See page Tech-10 for Tamper and Weather Resistant descriptions.
See section N for wallplates.
SNAP1RNA
Many of these products are Assembled in USA, as indicated, and many are Buy American
Compliant. Please contact Hubbell with any certification requirements.
www.hubbell-wiring.com
®
Wiring Device-Kellems
L-15
Hospital Products
Surge Protection Devices
15 and 20 Ampere, 125 Volts AC 60 Hz
1.75"
(44.3)
Hospital Grade
2.62"
(66.5)
3.31"
(84.0)
1.33"
(33.8)
SNAP8362GYS
1.30"
(33.0)
1.23"
(31.2)
2.62"
(66.5)
3.28"
(83.3)
1.75"
(44.5)
1.13"
(28.7)
Circuit
Guard®
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Receptacles
20A 125V
NEMA 5-20R
UL CSA
1 HP
Description
Color
Catalog Number
SNAPConnect®
Tamper-Resistant,
surge supression receptacle,
smooth face, duplex. Requires connector
on page L-15, sold separately.
Blue
Gray
Ivory
Light Almond
Red
White
SNAP8262S
SNAP8262GYS
SNAP8262IS
SNAP8262LAS
SNAP8262RS
SNAP8262WS
SNAP8362S
SNAP8362GYS
SNAP8362IS
SNAP8362LAS
SNAP8362RS
SNAP8362WS
Surge suppression receptacles with
light and alarm, 240 joules/15000A
per mode.
Almond
Blue
Gray
Ivory
Red
White
HBL8262ALSA
HBL8262SA
HBL8262GYSA
HBL8262ISA
HBL8262RSA
HBL8262WSA
HBL8362ALSA
HBL8362SA
HBL8362GYSA
HBL8362ISA
HBL8362RSA
HBL8362WSA
Isolated ground, surge suppression
receptacles with light and alarm,
240 joules/15000A per mode.
Blue
Gray
Ivory
Orange
Red
White
IG8262SA
IG8262GYSA
IG8262ISA
IG8262OSA
IG8262RSA
IG8262WSA
IG8362SA
IG8362GYSA
IG8362ISA
IG8362OSA
IG8362RSA
IG8362WSA
4-PLEX® surge suppression receptacles
with lights, 80 joules/6500A per mode.
Blue
Ivory
Red
HBL8362ISA
–
–
–
HBL420HS
HBL420HIS
HBL420HRS
Note: See page Tech-10 for Tamper-Resistant description.
.92"
(23.4)
.1"
(2.5)
4-PLEX® Accessories
4.30" sq.
(109.2)
3.02"
(76.7)
3.38" (85.9)
Description
Color
Catalog Number
4-PLEX Adapter Plates for 1- and 2-gang,
and 4 in. (101.6) square device boxes.
Blue
Ivory
Red
HBL4APBL
HBL4API
HBL4APR
4-PLEX Portable Box. Portable 4 in. (101.6)
square box with cord grip. Accepts up to
.66 in. (16.8) diameter cord.
Ivory
HBL4PBI
Note: 4-PLEX Box is not UL Listed.
HBL420HS
3.28"
(83.3)
4.78"
(121.4)
.19" (4.8)
1.75"
(44.5 )
3.38"sq. (85.9)
HBL4API
2.75"
(69.9)
Description
Catalog Number
15A 125V power strip with filtering, surge protection, 3 hospital grade duplex receptacles,
6 foot power supply cord and hospital grade plug.
HBL6PSHG
Note: See section M for additinal information on surge protection products.
Wallplates (Sold Separately)
Configuration
1-Gang
HBL6PSHG
Dimensions in Inches (mm)
L-16
UL 1449
3 rd Edition
Metallic Power Strip Surge Protected
.38" (9.7)
Color
Almond
Blue
Blue
Gray
Ivory
Ivory
Off. White
Orange
Red
White
High-Impact Nylon
Standard
Mid-Size
NP26AL
–
–
NP26GY
–
NP26I
NP26OW
NP26OIG**
NP26R
NP26W
NPJ26AL
NPJ26CBL*
NPJ26BL
NPJ26GY
NPJ26C*
NPJ26I
NPJ26OW
–
NPJ26R
NPJ26W
Stainless Steel (S/S)
Brass
Plated Steel
Chrome
Brass
Plated
SCH26
SBP26
Smooth S/S
Smooth S/S
Smooth Brass
SS26
SSJ26
SB26
Note: *Premarked “COMPUTER ONLY.” Lettering is block ¼" high.
**Premarked “ISOLATED GROUND.” Lettering is block ¼" high.
Jumbo size plate.
See page A-60 for technical information on 4-PLEX devices.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hospital Products
Hubbellock® Plugs, Connector Bodies and Receptacles
20 Ampere, 125 Volts AC only, 2 Pole, 3 Wire Grounding
For Hospital Use Only
+
Hubbellock® Plugs and Connector Bodies
20A 125V AC
20A 125V AC
Description
Plugs
Connector Bodies
Nylon cover, thermoset interior.
HBL23014HGB
HBL23001HGB
Armored, epoxy filled, rubber cord grip.
HBL23004HG
–
Note: Cord clamp range for plug and connector .300" to .660" (7.6 to 16.8).
Receptacles
Description
Catalog Number
–
Black, back wired.
HBL23000HG
Wallplates
Description
Catalog Number
Stainless steel 302/304, single-gang.
HBL23901HG
Stainless steel 302/304, three-gang for two receptacles.
HBL23909HG
Note: Suffix HG or HGB type for hospital use only.
IP30
SUITABILITY
20A 125V AC
Explosion Proof Plug
Description
Catalog Number
Plug, with, epoxy kit, accepts #12 or #14 type SO cable.
HBL24312
Hazardous to Non-hazardous Location Receptacle Conversion Kits
Conversion kits for replacement of explosion proof receptacles listed above, with non-explosion proof receptacles,
in the hospital areas formerly classified as hazardous locations and now classified non-hazardous locations due to
the change from flammable anesthetizing gases to nonflammable anesthetizing gases.
For Conversion To:
Catalog Number
20A, 125V, duplex receptacle (Hubbell HBL830 Series). Includes adapter ring and
stainless steel wall plate for duplex receptacle (receptacle not included).
HBL24300RKD
20A, 125V, Hospital Hubbellock receptacle (Hubbell HBL23000HG) or 20A, 125V,
straight blade single receptacle (Hubbell HBL8310 series). Includes adapter ring
and stainless wall plate for single receptacle ( receptacle not included.
HBL24300RKS
HBL24300RKD Duplex retrofit kit accepts
20A duplex straight blade hospital grade
receptacles (HBL8300, HBL8300I, IG8300, etc.).
Order receptacles separately.
24352 Low-profile style explosion-proof
receptacle (now discontinued).
HBL24300RKS Single retrofit accepts hospital only
Hubbellock single receptacles (Hubbell HBL23000HG)
or 20A single straight blade hospital grade receptacles
(Hubbell HBL8310, HBL8310I, IG8310, etc.).
Order receptacles separately.
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
L-17
Hospital Products
Hubbellock® Mobile X-Ray Devices
50 and 60 Ampere, 250 Volts AC, 2 Pole, 3 Wire Grounding
IP30
SUITABILITY
50A 250V AC
Mobile X-Ray Plugs
60A 250V AC
Description
Catalog Number
Plug, with epoxy kit, less cord clamp.
HBL25515
HBL25615
Plug, with cord clamp, less epoxy kit.
HBL25525
HBL25625
Note: Cord clamp range of plugs with cord clamps .830" to 1.3" (21.1 to 33.0).
50A plugs fit 50A or 60A receptacles.
Mobile X-Ray Receptacles
50A 250V AC
60A 250V AC
Description
Catalog Number
Receptacle with stainless steel plate assembly.
HBL25505
HBL25605
Receptacle with cast aluminum plate assembly.
HBL25503
HBL25603
Replacement receptacle interior.
–
IN16494
Accessory
Description
Catalog Number
Box stamped steel 8" x 8" x 4" (203.2 x 203.2 x 101.6),
accommodates 50A and 60A mobile X-ray receptacles.
Knockout sizes 1¼", 1½" and 2".
HBL25509
Dimensions in Inches (mm)
L-18
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hospital Products
Technical Information
HBL® Extra Heavy Duty, Straight Blade
Hospital Grade Duplex Receptacles
HBL8200GY
Specifications
Receptacles
Part
Description
Typical Specification – Catalog No. HBL8200
Manufacturer’s Identification – Hubbell HBL8200
Description – Hospital Grade, Straight Blade Duplex Receptacle
Type – 2 Pole, 3 Wire, Grounding
Rating – 15A, 125V
Certification: UL Listed to UL 498 File E2186, Fed. Spec. WC596,
Hospital Grade, NEMA® WD-6 Compliant
Certified to CSA, C22.2, No. 42 File 285
Receptacle
Top
Base
By-Pass Power Contacts
Clamping Plate
Mounting Strap
Line Terminal Screws
Hex Head Grounding Screw
Center Assembly Rivet
Automatic Self-Grounding Clip
Flat Head Mounting Screws
15A
PBT*
RTP**
.037 in. (.9) Brass – Nickel Finish
.031 in. (.8) Brass – Nickel Finish
.050 in. (1.3) Brass – Nickel Finish
#10-32 Silicone Bronze, Multiple Drive
#10-32 (Green) Silicon Bronze, Multiple Drive
Silicon Bronze
Stainless Steel
Stainless Steel
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Terminals identified in accordance with UL 498 and CSA (Brass, White, Green).
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Environmental – Material
Flammability
Operating Temperature
UL 94V-0 and UL 94-5 VA.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Note: *Polybutylene Terephthalate.
**Reinforced Thermoplastic Polyester.
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
www.hubbell-wiring.com
®
Wiring Device-Kellems
L-19
Hospital Products
Technical Information
SNAPConnect® Straight Blade
Hospital Grade Duplex Receptacles
SNAP8200WA
Specifications
SNAP2182A
Receptacle
Part
Description
Typical Specification – Catalog No. SNAP8200
Manufacturer’s Identification – Hubbell SNAP8200
Description – Straight Blade Duplex Receptacle
Type – 2 Pole, 3 Wire, Grounding
Rating – 15A, 125V
Certification – UL Listed to UL 498
Fed. Spec. WC596, Certified to CSA 22.2, No. 42
Receptacle
Top
Base
Triple Wipe Power Contacts
Mounting Strap
Automatic Self-Grounding Clip
Flat Head Mounting Screws
15A
Nylon
Nylon
Brass
Galvanized Steel; Brass (HG)
Stainless Steel
Steel-Zinc Plated/Self Tapping
Connector
Contact
Connector Body
Wire
SNAP1RA
SNAP2RA
Brass
Brass
Clear Polycarbonate
Clear Polycarbonate
6" Solid copper #12 AWG THHN/THWN-2 600V, T90 Nylon FT-1, PVC 90°C (min).
6" Stranded copper #12 AWG THHN/THWN-2 600V, T90 Nylon FT-1, PVC 90°C (min).
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Withstands 2,000V minimum.
125V as rated.
Receptacle certified for current interrupting at full rated current with equivalently
rated NEMA® plug.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated DC current.
Temperature Rise
Mechanical
Terminal Wire Leads Identification
Product Identification
Terminal wire leads identified in accordance with UL 498 (Black, White, Green).
Ratings are a permanent part of the device.
Environmental – Material
Flammability
Operating Temperature
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (without impact).
Dimensions
GREEN DOT ON
HOSPITAL GRADE ONLY
2.63"
(66.73)
.86"
(21.92)
.24"
(6.10)
1.64"
(41.77)
1.25"
(31.8)
3.28"
(83.34)
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
L-20
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hospital Products
Technical Information
Hubbell-PRO Heavy Duty, Straight Blade
Hospital Grade Duplex Receptacles
8200REDLTR
Specifications
2182IVLTR
Receptacle
Part
Description
Typical Specification - Catalog No. 8200
Manufacturer's Identification - Hubbell-Pro 8200
Description - Straight Blade Hospital Grade Duplex Receptacle
Type - 2 Pole, 3 Wire, Grounding
Rating - 15A, 125V
Certification - UL listed to UL 498, Fed Spec WC596
Hospital Grade, NEMA® WD-6 Compliant
Certified to CSA
Receptacle
Top
Base
Triple Wipe Power Contacts
Clamping Plate
Mounting Strap
Terminal Screws
Hex Head Grounding Screw
Automatic Self-Grounding Staple
Mounting Screws
15A
Nylon
Nylon
.0295" Brass
Plated Steel
.040" Galvalized Steel
Plated Steel
Plated Steel
Stainless Steel
Zinc Plated Steel
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Terminals identified in accordance with UL 498 and CSA (Brass, White, Green)
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Environmental – Material
Flammability
Operating Temperature
www.hubbell-wiring.com
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
®
Wiring Device-Kellems
L-21
Hospital Products
Technical Information
USB Charger Tamper-Resistant, Straight Blade
Hospital Grade Duplex Receptacles
USB8300R
Specifications
USB Charger Receptacle
Part
Description
Typical Specification - Catalog No. USB8300
Manufacturer's Identification - Hubbell USB8300
USB Charger
Charger Receptacle
USB 3 Amp 5VDC, Electrical 15A or 20A 125V
Ports
LED
Top
Base
Triple Wipe Power Contacts
Clamping Plate
Mounting Strap
Terminal Screws
Hex Head Grounding Screw
Automatic Self-Grounding Staple
Mounting Screws
Type A, 2.0
Green Indicator
Nylon
Nylon
.030" Cooper Alloy
Plated Steel
.040" Galvanized Steel
Plated Steel
Plated Steel
Stainless Steel
Zinc Plated Steel
Receptacle
Description - Hospital Grade, Straight Blade Duplex Receptacle
Type - 2 Pole, 3 Wire, Grounding
Rating - 15A, 125V
Certification – cULus listed to UL498 and UL1310
Hospital Grade, NEMA® WD-6 Compliant (USB8200
and 8300 series only)
Complies with battery charging specification USB BC 1.2
Complies with Part 15 of the FCC rules
Compatible with SUB 1.1/2.0/3.0 devices, including Apple products
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Mechanical
USB Port
Terminal Identification
Terminal Accommodation
Product Identification
Circuit Feed-Through
Stainless Steel Rated for 10,000 plug insertions and removal
Terminals identified in accordance with UL 498 and CSA (Brass, White, Green)
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
20 Amp 125 Volt
Environmental – Material
Flammability
Operating Temperature
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
L-22
®
Wiring Device-Kellems
www.hubbell-wiring.com
Hospital Products
Technical Information
Insulgrip® Plugs and Connectors
Hospital Grade
HBL8215C
HBL8219C
Specifications
Plug
Part
Description
Typical Specification—Catalog No. HBL8215C
Manufacturer’s Identification—Hubbell HBL8215C Plug
Description—Hospital Grade Straight Blade Plug
Type—2 Pole, 3 Wire Grounding
Rating— 15A, 125V
Certification—UL Listed, CSA Certified
UL Verified to Fed. Spec. WC596
IP Suitability—IP20
Plug
Housing
Blade Holder
Retainer
Cord Clamp
Contact Blades
Ground Contact Blade
Line Terminal Screws
Ground Screw
Wire Clamps
15A
Nylon— Black
Nylon— Natural
Polycarbonate—Clear
Nylon—Natural
.06" (1.5) Brass
.04" (1.0) Brass
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive (Green)
.08" (2.0) Steel—Nickel Finish
Connector
Part
Description
Typical Specification—Catalog No. HBL8219
Manufacturer’s Identification—Hubbell HBL8219C Connector
Description—Hospital Grade Straight Blade Connector Body
Type—2 Pole, 3 Wire Grounding
Rating—15A, 125V
Certification—UL Listed, CSA Certified
UL Verified to Fed. Spec. WC596
IP Suitability—IP20
Connector
Housing
Contact Holder
Retainer
Cord Clamp
Contacts
Line Terminal Screws
Ground Screw
Wire Clamps
15A
Nylon—Black
Nylon— Natural
Polycarbonate—Clear
Nylon—Natural
.04" (1.0) Copper Alloy
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive (Green)
.08" (2.0) Steel—Nickel Finish
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2000V AC minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 100 cycles of overload at
150% of rated voltage DC.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Torque Range
Cord Diameter Range
Terminals identified in accordance with UL and CSA (Brass, White, and Green).
#18-10 AWG.
Ratings are a permanent part of the device.
Cord clamp/terminal screws 9 to 12 in-lbs.
.230"-.720" (5.8-18.3) Integral cord grip.
Enviromental-Material
Flammability
Operating Temperature
UL 94HB or better.
Maximum continuous 75°C, minimum -40°C (w/o impact)
Note: Please consult the factory for product dimensions and specifications for other products listed in this catalog.
www.hubbell-wiring.com
®
Wiring Device-Kellems
L-23
Hospital Products
Technical Information
Valise® Plugs and Connectors
Hospital Grade
HBL8115V
HBL8119V
Specifications
Plug
Part
Description
Typical Specification—Catalog No. HBL8115V
Manufacturer’s Identification—Hubbell HBL8115V Plug
Description—Hospital Grade Straight Body Plug
Type— 2 Pole, 3 Wire, Grounding
Rating—15A, 125V
Certifications—UL Listed to UL498
File E1706, CSA Certified to C22.2
No. 42 File LR280. Fed. Spec. WC596
IP Suitability—IP20
Plug
Housing
Contact Blades
Ground Blade
Terminal Screws
Cable Inserts
Terminal Clamps
Body Holding Screws
15A
Nylon
Brass
Brass
Multiple Drive
Polyphenylene Oxide
Plated CR Steel
Multiple Drive
Connector
Part
Description
Typical Specification—Catalog No. HBL8119V
Manufacturer’s Identifications—Hubbell HBL8119V Connector Body
Description—Hospital Grade Straight Connector Body
Type—2 Pole, 3 Wire, Grounding
Rating—15A, 125V
Certifications—UL Listed to UL498
File E1706, CSA Certified to C22.2
No. 42 File LR280. Fed. Spec. WC596
IP Suitability—IP20
Connector
Housing
Contact and Ground Spring
Terminal Screws
Cable Inserts
Terminal Clamps
Body Holding Screws
15A
Nylon
Brass
Multiple Drive
Polyphenylene Oxide
Plated CR Steel
Multiple Drive
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2000V AC minimum.
125V or 250V as rated.
Certified for current Interrupting at full rated current.
Max. 30°C temperature rise at full rated current.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Torque
Cord Diameter Range
Terminals identified in accordance with UL and CSA (Brass, White, and Green)
#16 to #12 AWG.
Ratings are a permanent part of the device.
Terminal screws 12 in.-lbs. Cord clamp screws 7 to 10 in.-lbs.
.300" to .660" (7.6 to 16.8)
Enviromental-Material
Flammability
Operating Temperature
UL 94HB
Maximum continuous 75°C, minimum -40°C (w/o impact).
Standards
NEMA Configurations WD6.
Listed to UL Standard UL498 and UL Verified to Ped. Spec. WC596.
Certified to CSA Standard C22.2 No. 42.
L-24
®
Wiring Device-Kellems
www.hubbell-wiring.com
Section M
SpikeShield® Power Quality Products
Index
Product
Page
Surge Protection Panels &
Wired-In Branch Panels
Surge Protection Devices (SPDs) Introduction. . . . . . . . . . . . . . . . . . . .M-2
Service/Branch Panel Protection
320kA and 160kA Service/Branch Panel Protection . . . . . . . . . . . . . . .M-4
120kA Service/Branch Panel Protection . . . . . . . . . . . . . . . . . . . . . . . .M-5
Wired-In Branch Panel Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M-6
Wired-In Surge Arrestors and Protective Devices . . . . . . . . . . . . . . . . .M-7
Surge Protection Plug Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M-9
Surge Protection Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M-11
SNAPConnect® Tamper-Resistant Surge Protection Receptacles . . . . . M-13
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M-19
Isolated Ground Receptacles
SNAPConnect®
SpikeShield® Surge
Suppression Plug Strips
Page
Isolated Ground Receptacles . . . . . . . . . . . . . . . . . . . M-13
Straight Blade Isolated Ground Receptacles . . . . . . . . . . . . . . . . . . . .M-15
Isolated Ground Twist-Lock® Receptacles . . . . . . . . . . . . . . . . . . . . . .M-18
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .M-20
SNAPConnect® Surge and
Isolated Ground Receptacles
Surge Suppression &
Isolated Ground Receptacles
www.hubbell-wiring.com
®
Wiring Device-Kellems
M-1
SpikeShield® Power Quality Products
Surge Protection Devices (SPDs) Introduction
Panel Protection
The SpikeShield® line of panel surge protection devices
offers a broad selection of products to meet the various
requirements of industrial, commercial, institutional and
residential applications. No other surge suppression
system can meet the flexibility, safety and performance
standards set by Hubbell.
Hubbell offers surge protection products which can handle
peak amperage capacities of 50kA to 320kA.
The SpikeShield branch panel protection system includes
the complete compact and economical 50, 80, 100 and
120kA series product offering.
These wired-in products can protect branch panels, safety
switches and load centers. They can be installed as an
appendage or flush mounted to a finished wall next to
the panel. The versatility of the wired-in products allows
them to be used on branch panels, as well as main panel
protection in smaller commercial facilities.
The SpikeShield product line also includes a line of panels
with replaceable modules. This series features improved
performance through the use of a low impedance bus-bar
design and easily replaceable bolt-down modules.
M-2
®
Wiring Device-Kellems
www.hubbell-wiring.com
SpikeShield® Power Quality Products
320kA, 160kA and 120kA Service/Branch Panel Protection
Features and Benefits
Surface mounting
Peak Amp Capacity
320kA and 160kA
#10 AWG to
#2 AWG lug size
Bolt-down, replaceable modules
NEMA 3R/12 enclosure
Surface mounting
Diagnostics panel
Peak Amp Capacity
120kA
#12 AWG to
#2 AWG lug size
NEMA 3R/12 enclosure
Features
Benefits
Thermal fusing
Thermal fuse prevents the MOVs from overheating when exposed to high current levels.
Compact design with
bus-bar pathways
Allows installation in areas with space restrictions. Minimizes connecting lead length which
reduces impedance ensuring improved clamping performance.
Peak amp capacity
Protects equipment under the worst electrical conditions.
Bolt-down modules
Assures positive connection and allows for easy replacement.
Fault-current fusing
Prevents excessive panel damage caused by internal short circuits or component failure.
LED and audible alarm
status indicator
Provides visual and audible indication of panel status. Green for operational, red for module failure.
Audible alarm for module failure with silencing.
Sine wave tracking
Provides uniform clamping throughout the sine wave.
Note: All panel products are UL Listed to Standard 1449-3rd edition.
www.hubbell-wiring.com
®
Wiring Device-Kellems
M-3
SpikeShield® Power Quality Products
320kA and 160kA Service/Branch Panel Protection
Ordering Information and Specifications
The SpikeShield® service entrance
product line includes a line of panels with
replaceable modules. This series features
improved performance through the use of
a low impedance bus-bar design and easily
replaceable bolt-down modules.
They incorporate a modular (replaceable surge
suppression modules) design and feature the
latest industry approvals and safety ratings.
Including UL 1449-3rd edition.
HBL4P320A
HBL8P160DA
Service/Branch Panel Protection 320,000 Peak Amp Capacity (Type 2 SPD)
Voltage V AC
Configuration
Catalog Number
With Disconnect
Replacement Module
120/240 Single phase
120/208 Wye*
240/120 Delta split phase
277/480 Wye**
347/600 Wye
1Ph. 3-wire +G
3Ph. Wye 4-wire +G
3Ph. Delta 4-wire +G ‘High Leg’
3Ph. Wye 4-wire +G
3Ph. Wye 4-wire +G
HBL3P320A
HBL4P320A
HBL6P320A
HBL8P320A
HBL10P320A
HBL3P320DA
HBL4P320DA
HBL6P320DA
HBL8P320DA
HBL10P320DA
HBL160M120A
HBL160M120A
HBL160M240A & HBL160M120A
HBL160M480A
HBL160M600A
Service/Branch Panel Protection 160,000 Peak Amp Capacity (Type 2 SPD)
120/240 Single phase
120/208 Wye*
240/120 Delta split phase
277/480 Wye**
347/600 Wye
1Ph. 3-wire +G
3Ph. Wye 4-wire +G
3Ph. Delta 4-wire +G ‘High Leg’
3Ph. Wye 4-wire +G
3Ph. Wye 4-wire +G
HBL3P160A
HBL4P160A
HBL6P160A
HBL8P160A
HBL10P160A
HBL3P160DA
HBL4P160DA
HBL6P160DA
HBL8P160DA
HBL10P160DA
HBL160M120A
HBL160M120A
HBL160M240A & HBL160M120A
HBL160M480A
HBL160M600A
Note: Units come standard with Surge Counter.
*120/208 Wye also applies to 127/220 Wye.
**277/480 Wye also applies to 220/380 Wye, 230/400 Wye and 240/415 Wye.
Electrical Specifications
Catalog Number
HBL3P320A
HBL4P320A
HBL6P320A
HBL8P320A
HBL10P320A
HBL3P160A
HBL4P160A
HBL6P160A
HBL8P160A
HBL10P160A
SCCR
In
MCOV †
L-N
200kA
200kA
200kA
200kA
200kA
20kA
20kA
20kA
20kA
20kA
150/300
150/300
270/150
320/640
420/840
700
700
1200/700
1200
1500
Voltage Protection Rating (VPR)
L-G
N-G
700
700
1200/700
1200
1500
700
700
700
1200
1500
L-L
1200
1200
1500/1000
1200
2500
Note:
SCCR - Short Circuit Current Rating.
† MCOV - Maximum Continuous Operating Voltage.
In - Nominal discharge current.
Product Specifications
Max. Surge Current per Phase:
Max. Operating Temperature:
Diagnostics:
Dimensions (Wye):
Dimensions (Delta):
Weight (320kA):
Weight (160kA):
Terminal Accommodation:
Frequency:
EMI/RFI:
NEMA:
Listing:
Warranty:
M-4
320kA and 160kA
-40ºF to 149ºF (-40ºC to 65ºC)
Red & Green LED’s, Diagnostic Test Switches, Dry Contacts, Audible Alarm, Surge Counter
6.0"D x 20.0"W x 24.0"L (with Disconnect); 6.0"D x 12.0"W x 12.0"L (without Disconnect)
6.0"D x 16.0"W x 20.0"L (with Disconnect); 7.0"D x 14.0"W x 16.0"L (without Disconnect),
54 lbs. (without Disconnect), 57.5 lbs. (with Disconnect)
21.9 lbs. (without Disconnect), 21.8lbs. (with Disconnect)
#10 AWG to #2 AWG
50/60 Hz
Up to -30dB
3R/12 Metallic
cULus UL1449-3rd edition type 2 SPD, UL1283, CSA C22.2 NO. 8-M1986
10 year
®
Wiring Device-Kellems
www.hubbell-wiring.com
SpikeShield® Power Quality Products
120kA Service/Branch Panel Protection
Ordering Information and Specifications
The SpikeShield® 120kA branch panel product
offering features an economical, compact,
modular design.
These wired-in products can protect branch panels,
safety switches and load centers. They can be
installed as an appendage or flush mounted to a
finished wall next to the panel. The versatility of the
wired-in products allows them to be used on branch
panels, as well as main panel protection found in
smaller commercial facilities or residential applications.
HBL8P120B
Service/Branch Panel Protection 120,000 Peak Amp Capacity (Type 2 SPD)
Voltage V AC
Configuration
Catalog Number
Replacement Module
120/240 Single Phase
120/208 Wye*
240/120 Delta split phase
277/480 Wye**
347/600 Wye
1Ph. 3-wire +G
3Ph. Wye 4-wire +G
3Ph. Delta 4-wire +G ‘High Leg’
3Ph. Wye 4-wire +G
3Ph. Wye 4-wire +G
HBL3P120B
HBL4P120B
HBL6P120B
HBL8P120B
HBL10P120B
HBL3P120BM
HBL4P120BM
HBL6P120BM
HBL8P120BM
HBL10P120BM
Note: Units come standard with Surge Counter.
*120/208 Wye also applies to 127/220 Wye.
**277/480 Wye also applies to 220/380 Wye, 230/400 Wye and 240/415 Wye.
Electrical Specifications
Catalog Number
SCCR
In
MCOV †
L-N
HBL3P120B
HBL4P120B
HBL6P120B
HBL8P120B
HBL10P120B
200kA
200kA
200kA
200kA
200kA
20kA
20kA
20kA
20kA
20kA
150/270
150/270
275/150
320/640
390/780
700
700
1000/700
1200
1500
Voltage Protection Rating (VPR)
L-G
N-G
700
700
1000/700
1200
1500
700
700
700
1200
1500
L-L
1200
1200
1500/1200
2000
2500
Note: SCCR - Short Circuit Current Rating.
† MCOV - Maximum Continuous Operating Voltage.
In - Nominal discharge current.
Product Specifications
Max. Surge Current per Phase:
Max. Operating Temperature:
Diagnostics:
Dimensions:
Weight:
Terminal Accommodation:
Frequency:
EMI/RFI:
NEMA:
Listing:
Warranty:
www.hubbell-wiring.com
120kA
-40ºF to 149ºF (-40ºC to 65ºC)
Red & Green LED’s, Diagnostic Test Switches, Dry Contacts, Audible Alarm, Surge Counter
7.0"D x 14.0"W x 16.0"L
21.8 lbs.
#12 AWG to #2 AWG
50/60 Hz
Up to -30dB
3R/12 Metallic
cULus UL1449-3rd edition type 2 SPD, UL1283, CSA C22.2 NO. 8-M1986
10 year
®
Wiring Device-Kellems
M-5
SpikeShield® Power Quality Products
Wired-In Branch Panel Protection
100,000 Peak Amperage Capacity
The wired-in surge protection device brick design is
ideal for areas where space is a major consideration.
The surge unit can be mounted directly to the
panel through a chase nipple connection which will
reduce lead length and impedance while increasing
protection levels.
The 100kA product features a NEMA 4X housing
and a 200kA SCCR rating.
They SpikeShield wired-in surge protective devices
are UL 1449-3rd edition listed.
HBL9W100C
Wired-In Branch Panel Protection 100,000 Peak Amp Capacity (Type 2 SPD)
Service Voltage V AC
Configuration
Catalog Number
120/240 Single Phase
120/208 Wye*
240 Delta
240/120 Delta split phase
277/480 Wye**
480 Delta
347/600 Wye
600 Delta
1Ph. 3-wire +G
3Ph. Wye 4-wire +G
3Ph. Delta 3-wire Corner Gnd
3Ph. Delta 4-wire +G ‘High Leg’
3Ph. Wye 4-wire +G
3Ph. Delta 3-wire Corner Gnd
3Ph. Wye 4-wire +G
3Ph. Delta 3-wire Corner Gnd
HBL3W100C
HBL4W100C
HBL5W100C
HBL6W100C
HBL8W100C
HBL9W100C
HBL10W100C
HBL11W100C
Note: *120/208 Wye also applies to 127/220 Wye.
**277/480 Wye also applies to 220/380 Wye, 230/400 Wye and 240/415 Wye.
Also can be used on ungrounded systems.
Electrical Specifications
Catalog Number
SCCR
In
MCOV †
L-N
HBL3W100C
HBL4W100C
HBL5W100C
HBL6W100C
HBL8W100C
HBL9W100C
HBL10W100C
HBL11W100C
200kA
200kA
200kA
200kA
200kA
200kA
200kA
200kA
20kA
20kA
20kA
20kA
20kA
20kA
20kA
20kA
150/270
150/270
300
275/150
320/640
640
390/780
780
900
900
N/A
1000
1200
N/A
1500
N/A
Voltage Protection Rating (VPR)
L-G
N-G
1200
1200
N/A
1200
2000
N/A
2500
N/A
700
700
N/A
700
1000
N/A
1500
N/A
L-L
1500
1500
1500
1500
2500
3000
3000
3000
Note:
SCCR - Short Circuit Current Rating.
† MCOV - Maximum Continuous Operating Voltage.
In - Nominal discharge current.
Product Specifications
Max. Surge Current per Phase:
Max. Operating Temperature:
Diagnostics:
Dimensions:
Weight:
Terminal Accommodation:
Frequency:
EMI/RFI:
NEMA:
Listing:
Warranty:
M-6
100kA
-40ºF to 140ºF (-40ºC to 60ºC)
Green Status LED’s, Audible Alarm, Dry Contacts
3.1"D x 9.9"W x 4.8"H
4.78 lbs.
#10 AWG 18.0" Wire Leads
50/60 Hz
Up to -30dB
Type 4X
cULus UL1449-3rd edition type 2 SPD,
UL1283 (Wye prod. only), CSA C22.2 NO. 8-M1986
10 year
®
Wiring Device-Kellems
www.hubbell-wiring.com
SpikeShield® Power Quality Products
Wired-In Surge Arrestors and Protective Devices
36,000, 40,000 and 50,000 Peak Amperage Capacity
Surge Arrestors are a low cost solution that
may be installed on the line side or load
side of the service entrance. These are also
excellent for OEM applications where size is
an important variable.
Hubbell’s 50kA single phase wired-in surge
protective devices feature a compact design,
NEMA 4X rating and are UL 1449-3rd edition
listed.
HBL3W50
HBLSDSA40
HBLSDSA36
Wired-In Surge Arrestors, Single Phase 36,000 and Three Phase 40,000 (Type 1 / Type 2 SPD)
Service Voltage V AC
Configuration
Peak Amp Capacity
120/240 Single Phase
347/600V Max Three Phase
1Ph. 3-wire
3Ph. 4-wire
36kA
40kA
Mounting Means
Catalog Number
Back Nipple Mount
Back Nipple Mount
HBLSDSA36
HBLSDSA40
Wired-In Surge Protective Devices 50,000 Peak Amp Capacity (Type 1 SPD)
Service Voltage V AC
Configuration
120/240 Single Phase
1Ph. 3-wire + G
Peak Amp Capacity
50kA
Mounting Means
Catalog Number
Side Nipple Mount
HBL3W50
Electrical Specifications
Catalog Number
SCCR
In
MCOV †
L-N
HBLSDSA36
HBLSDSA40
HBL3W50
HBL3W120
25kA
200kA
25kA
25kA
10kA
10kA
10kA
10kA
150
750/1500
150
150
700
2500
700
700
Voltage Protection Rating (VPR)
L-G
N-G
N/A
N/A
800
800
L-L
N/A
N/A
N/A
N/A
1200
4000
1200
1200
Note:
SCCR - Short Circuit Current Rating.
† MCOV - Maximum Continuous Operating Voltage.
In - Nominal discharge current.
Product Specifications
Max. Surge Current per Phase:
Max. Operating Temperature:
Diagnostics:
Dimensions:
Weight:
Terminal Accommodation:
Frequency:
EMI/RFI:
NEMA:
Listing:
Warranty:
www.hubbell-wiring.com
36kA
-40ºF to 160ºF
(-40ºC to 70ºC)
Green Status LED per line
1.9"D x 2.25"W x 2.25"H
.72 lbs.
#14 AWG Wire Leads
50/60 Hz
Up to -30dB
Type 4X
UL1449-3rd edition
2 year
40kA
-40ºF to 160ºF
(-40ºC to 70ºC)
Green Status LED per line
2.64"D x 3.6"W x 3.0"H
1.8 lbs.
#12 AWG Wire Leads
50/60 Hz
Up to -30dB
Type 4X
UL1449-3rd edition
2 year
®
50kA
-40ºF to 160ºF
(-40ºC to 70ºC)
Green Status LED per line
2.7"D x 3.0"W x 3.6"H
1.8 lbs.
#12 AWG Wire Leads
50/60 Hz
Up to -30dB
Type 4X
UL1449-3rd edition
10 year
Wiring Device-Kellems
M-7
SpikeShield® Power Quality Products
UL 1449
3 rd Edition
Surge Protection Plug Strips
Features and Benefits
Energy
Saving
HBL7PS1050A: 1050 joule, 6 foot cord,
$5,000 down-line warranty, tamperresistant shutters.
HBL8ESPS1050M: 1050 joule, 6 foot cord,
energy saving unit with master/slave set up.
Turns power off to peripherals when item
plugged into master is powered off.
HBL8PS350YL: Yellow, high visibility, robust, metal
housing, 350 joules, 6 foot cord, wire management
feature, $2,500 down-line warranty.
HBL4PS1050USB: Four outlet, 1050 joule
SPD features a black housing, 6 foot cord,
90 degree plug, and two USB ports for charging
smart phones and other electronic devices.
M-8
®
Wiring Device-Kellems
www.hubbell-wiring.com
SpikeShield® Power Quality Products
Surge Protection Plug Strips
15 Ampere, 125 Volts 50/60Hz
SpikeShield® Surge Protective Devices
Plug-in Style Surge Outlets
Description
# of
Joule
Outlets Rating
Peak AMP Cord
Rating
Length
Color
Warranty
Single outlet plug-in SPD
1
750
13.5kA
N/A
Off. White
N/A
Catalog Number
HBL1PI750
Single outlet plug-in SPD
w/phone line protection
1
750
13.5kA
N/A
Off. White
N/A
HBL1PI750M
Single outlet plug-in SPD
w/CATV protection
1
750
13.5kA
N/A
Off. White
N/A
HBL1PI750C
Three outlet plug-in SPD
3
750
13.5kA
N/A
Off. White
N/A
HBL3PI750
HBL1PI750
HBL1PI750M
HBL1PI750C
HBL3PI750
UL 1449
3 rd Edition
SpikeShield® Surge Protection Plug Strips
Metallic Strips
Description
# of
Joule Peak AMP Cord
Outlets Rating
Rating
Length
Color
Down Line
Warranty Catalog Number
N/A
HBL6MPS
Metal Power Strip
(No surge protection)
6
N/A
N/A
6'
Off. White
Metal SPD
6
1050
19.5kA
6'
Off. White
$2,500 HBL6MPS1050
SPD w/Wire Management
6
350
6.5kA
6'
Yellow
$2,500 HBL6PS350YL
SPD w/Wire Management
8
350
6.5kA
6'
Yellow
$2,500 HBL8PS350YL
Heavy Duty SPD
w/HBL5252BK Receptacles
6
900
30kA
6'
Black
N/A
HBL6PS
Heavy Duty SPD
w/HBL8200HW Receptacles
6
900
30kA
6'
Black
N/A
HBL6PSHG
HBL6MPS
HBL6PS
Tamper-Resistant Non-Metallic Strips
Description
# of
Joule Peak AMP Cord
Outlets Rating
Rating
Length
Power Strip
(No surge protection)
6
N/A
N/A
SPD
6
350
SPD
6
350
SPD
6
SPD w/Fax/Modem
Color
Down Line
Warranty Catalog Number
N/A
HBL6PPS
6'
Off. White
6.5kA
6'
Off. White
$2,500 HBL6PS350A
6.5kA
15'
Off. White
$2,500 HBL6PS35015A
350
6.5kA
25'
Off. White
$2,500 HBL6PS35025A
6
1050
19.5kA
6'
Off. White
$2,500 HBL6PS1050MA
SPD
7
1050
19.5kA
6'
Off. White
$10,000 HBL7PS1050A
SPD w/Fax/Modem
7
1050
19.5kA
6'
Off. White
$10,000 HBL7PS1050MA
SPD
7
1050
19.5kA
15'
Off. White
$10,000 HBL7PS105015A
SPD w/Fax/Modem/CATV
8
2100
39kA
6'
Off. White
$25,000 HBL8PS2100MA
SPD w/Fax/Modem/CATV/DSS
8
2100
39kA
6'
Off. White
$25,000 HBL8PS2100DA
HBL6PS350YL
HBL6PS350A
Specialty Non-Metallic Surge Strips
Description
# of
Joule Peak AMP Cord
Outlets Rating
Rating
Length
Color
Down Line
Warranty Catalog Number
$10,000 HBL4PS1050USB*
SPD w/Two USB Ports
4
1050
19.5kA
6'
Black
Remote Switch SPD
w/One Keychain Ring Control
6
2100
39kA
6'
Off. White
$25,000 HBL6RSPS2100
Energy Saving SPD w/Master/
Controlled Design w/Fax/Modem
8
1050
19.5kA
6'
Off. White
$10,000 HBL8ESPS1050M
Energy Saving SPD Master/
Controlled Design w/CATV Protection
8
1050
19.5kA
6'
Off. White
$10,000 HBL8ESPS1050C
HBL8PS350YL
HBL6RSPS2100
HBL8PS2100MA
Note: See page Tech-10 for Tamper-Resistant description.
*With 90 Angle Plug.
www.hubbell-wiring.com
®
Wiring Device-Kellems
HBL8ESPS1050M
M-9
SpikeShield® Power Quality Products
Surge Protection Receptacles
Features and Benefits
Meets UL Standards 1449 3rd
Edition and 498; CSA Certified
Damage-alert alarm sounds when
surge protection is no longer
functioning and keeps sounding
until the receptacle is replaced or
muting screw is utilized
Muting screw allows damagealert alarm to be silenced until
device is replaced
Distinctive surge symbol
provides quick visual
identification of surge
suppression receptacle.
High-impact nylon face
resists breakage
Power-on indicator light verifies
instantly that power is available at
the receptacle and the suppression
circuit is fully functional; light off
means power has been interrupted;
flashing light indicates surge
protection circuitry has been
damaged
Fits standard wall box
Automatic self-grounding
staple attached to
bridge meets NEC®
requirements
IG8362SA
Note: The effectiveness of SPD devices diminishes with the increase in distance between the device and the equipment to be protected.
Surge Protection Receptacles
Hubbell has the broadest offering of SPD receptacles in
the industry with technology that is unsurpassed. Inside
Hubbell SPD receptacles are two 22mm square MOVs
providing 240 joules of surge protection for each mode.
The nylon component shield protects the printed circuit
board from moisture and contaminants. An all-glass PC
board provides superior moisture immunity for longer life in
humid environments. Conformal coating is provided on the
printed circuit board for additional moisture immunity.
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
M-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
SpikeShield® Power Quality Products
Surge Protection Receptacles
15 and 20 Ampere, 125 Volts AC 60 Hz
G
G
W
Circuit Guard®, Specification Grade
Duplex Receptacles
15A 125V
NEMA 5-15R
UL CSA
Color
Catalog Number
Surge suppression receptacles with
light, 240 joules/15000A per mode.
Blue
Ivory
Office White
White
Almond
Blue
Gray
Ivory
Office White
White
Blue
Gray
Ivory
Office White
Orange
White
Blue
Ivory
HBL5260SA
HBL5260ISA
HBL5260OWSA
HBL5260WSA
HBL5262ALSA
HBL5262SA
HBL5262GYSA
HBL5262ISA
HBL5262OWSA
HBL5262WSA
IG5262SA
IG5262GYSA
IG5262ISA
IG5262OWSA
IG5262OSA
IG5262WSA
HBL415S
HBL415IS
Isolated ground, surge suppression
receptacles with light and alarm,
240 joules/15000A per mode.
4-PLEX® surge suppression receptacles
with lights. 80 joules/6500A per mode.
HBL5360SA
HBL5360ISA
HBL5360OWSA
HBL5360WSA
HBL5362ALSA
HBL5362SA
HBL5362GYSA
HBL5362ISA
HBL5362OWSA
HBL5362WSA
IG5362SA
IG5362GYSA
IG5362ISA
IG5362OWSA
IG5362OSA
IG5362WSA
HBL420S
HBL420IS
3.28"
(83.3) 2.62"
(66.5)
Description
Color
Catalog Number
Surge suppression receptacles with
light and alarm, 240 joules/15000A
per mode.
Almond
Blue
Gray
Ivory
Red
White
Blue
Gray
Ivory
Orange
Red
White
Blue
Ivory
Red
HBL8262ALSA
HBL8262SA
HBL8262GYSA
HBL8262ISA
HBL8262RSA
HBL8262WSA
IG8262SA
IG8262GYSA
IG8262ISA
IG8262OSA
IG8262RSA
IG8262WSA
—
—
—
4-PLEX surge suppression receptacles
with lights, 80 joules/6500A per mode.
1.13"
(28.7)
1.75"
(44.5)
HBL5262GYSA
1.30"
(33.0)
1.23"
(31.2)
3.28"
(83.3) 2.62"
(66.5)
Circuit Guard®, Hospital Grade Duplex Receptacles
Isolated ground, surge suppression
receptacles with light and alarm,
240 joules/15000A per mode.
1.23"
(31.2)
20A 125V
NEMA 5-20R
UL CSA
Description
Surge suppression receptacles with
light and alarm, 240 joules/15000A
per mode.
1.30"
(33.0)
W
HBL8362ALSA
HBL8362SA
HBL8362GYSA
HBL8362ISA
HBL8362RSA
HBL8362WSA
IG8362SA
IG8362GYSA
IG8362ISA
IG8362OSA
IG8362RSA
IG8362WSA
HBL420HS
HBL420HIS
HBL420HRS
1.13"
(28.7)
1.75"
(44.5)
IG5362SA
1.30"
(33.0)
1.23"
(31.2)
3.28"
(83.3) 2.62"
(66.5)
4-PLEX® Accessories
Description
Color
Catalog Number
4-PLEX adapter plates for 1- and 2-gang
(4-PLEX mount directly to 4" (101.6) square
device boxes).
4-PLEX portable box. Portable 4" (101.6) square box
with one cord grip. Accepts up to .66" (16.8) dia. cord.
Blue
Ivory
Red
Ivory
HBL4APBL
HBL4API
HBL4APR
HBL4PBI
1.75"
(44.5)
1.13"
(28.7)
HBL8362ISA
Note: 4-PLEX box is not UL Listed.
3.38" (85.9)
3.02" (76.7)
Wallplates (Sold Separately)
Configuration
1-Gang
Color
Almond
Blue
Blue
Gray
Ivory
Ivory
Off. White
Orange
Red
White
High-Impact Nylon
Standard
NP26AL
–
–
NP26GY
–
NP26I
NP26OW
NP26OIG**
NP26R
NP26W
Mid-Size
NPJ26AL
NPJ26CBL*
NPJ26BL
NPJ26GY
NPJ26C*
NPJ26I
NPJ26OW
–
NPJ26R
NPJ26W
Stainless Steel (S/S)
Brass
Plated Steel
Chrome
Brass
Plated
SCH26
SBP26
Smooth S/S
Smooth S/S
Smooth
Brass
SS26
SSJ26
SB26
4.30" sq.
(109.2)
.92"
(23.4)
HBL415S
Note: *Premarked “COMPUTER ONLY.” Lettering is block ¼" high.
**Premarked “ISOLATED GROUND.” Lettering is block ¼" high.
Jumbo size plate.
See section N for additional wallplates.
See page M-19 for technical information.
www.hubbell-wiring.com
.1"
(2.5)
Dimensions in Inches (mm)
®
Wiring Device-Kellems
M-11
SpikeShield® Power Quality Products
SNAPConnect® Surge Protection and Isolated Ground Receptacles
Heavy Duty Specification Grade
Surge Suppression Receptacles
SpikeShield® SNAPConnect® tamper-resistant surge receptacles
provide excellent point of use protection for sensitive electronic
loads from every day power spikes and surges.
Isolated Ground Receptacles
SNAPConnect® Isolated Ground devices provide a clean ground
path for sensitive equipment. Devices come with power indication,
tamper-resistant or a combination of both.
Immediate Benefits!
M-12
Project Timing
Installation Efficiency
In-Use
• Save Time and Money
• No Stripping
• Flush Appearance
• Consistent Installation
• No Looping/No Tape
• Simple Replacement
• Meet Job Deadlines
• No Exposed Terminals
• Shallow Box Depth
®
Wiring Device-Kellems
www.hubbell-wiring.com
SpikeShield® Power Quality Products
SNAPConnect® Surge Protection and Isolated Ground Receptacles
Heavy Duty Specification Grade
G
G
W
SNAPConnect® Tamper-Resistant Surge
Protection Receptacle with Power Indicating LED
Description
SNAPConnect®
Hospital Grade
Tamper-Resistant, surge supression
receptacle, smooth face, duplex.
Commercial Grade SNAPConnect®
Tamper-Resistant, surge supression
receptacle, smooth face, duplex.
1.75"
(44.3)
W
15A 125V
NEMA 5-15R
UL CSA
20A 125V
NEMA 5-20R
UL CSA
Color
Catalog Number
Blue
Gray
Ivory
Light Almond
Red
White
SNAP8262S
SNAP8262GYS
SNAP8262IS
SNAP8262LAS
SNAP8262RS
SNAP8262WS
SNAP8362S
SNAP8362GYS
SNAP8362IS
SNAP8362LAS
SNAP8362RS
SNAP8362WS
Blue
Gray
Ivory
Light Almond
White
SNAP5262S
SNAP5262GYS
SNAP5262IS
SNAP5262LAS
SNAP5262WS
SNAP5362S
SNAP5362GYS
SNAP5362IS
SNAP5362LAS
SNAP5362WS
2.62"
(66.5)
3.31"
(84.0)
1.33"
(33.8)
SNAP5262S
1.64"
(41.7)
SNAPConnect® Tamper-Resistant Isolated Ground Receptacle
Description
Color
Catalog Number
Hospital Grade
TamperResistant, isolated ground, smooth face, duplex.
Orange
Red
SNAP8200IGTR
SNAP8200RIGTR
SNAP8300IGTR
SNAP8300RIGTR
Hospital Grade Style Line® decorator
SNAPConnect® Tamper-Resistant,
isolated ground, smooth face, duplex.
Orange
Red
SNAP2172IGTR
SNAP2172RIGTR
SNAP2182IGTR
SNAP2182RIGTR
Commercial Grade, isolated ground
Orange
SNAP5262IGTR
SNAP5362IGTR
Orange
SNAP2152IGTR
SNAP2162IGTR
SNAPConnect®
Style
Line®
Decorator
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP2182RIGTR
1.64"
(41.7)
SNAPConnect® Isolated Ground Receptacle
with Power Indicating LED
Description
Color
Catalog Number
Hospital Grade SNAPConnect®
Tamper-Resistant, isolated ground,
smooth face, duplex.
Orange
Red
SNAP8200IGL
SNAP8200RIGL
SNAP8300IGL
SNAP8300RIGL
Hospital Grade Style Line® decorator
SNAPConnect® Tamper-Resistant,
isolated ground, smooth face, duplex.
Orange
Red
SNAP2172IGL
SNAP2172RIGL
SNAP2182IGL
SNAP2182RIGL
Commercial Grade, isolated ground
Orange
SNAP5262IGL
SNAP5362IGL
SNAP5362IGL
Orange
SNAP2152IGL
SNAP2162IGL
1.64"
(41.7)
Style
Line®
Decorator
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAPConnect® Tamper-Resistant Isolated Ground Receptacle
with Power Indicating LED
Description
Color
Catalog Number
Hospital Grade SNAPConnect® TamperResistant, isolated ground, smooth face, duplex.
Orange
Red
SNAP8200IGLTR
SNAP8200RIGLTR
SNAP8300IGLTR
SNAP8300RIGLTR
Commercial Grade
Style Line® decorator
Orange
Red
SNAP2172IGLTR
SNAP2172RIGLTR
SNAP2182IGLTR
SNAP2182RIGLTR
Commercial Grade, isolated ground
Orange
SNAP5262IGLTR
SNAP5362IGLTR
Style Line® decorator
Orange
SNAP2152IGLTR
SNAP2162IGLTR
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP8300RIGLTR
.78"
(19.8)
1.48"
(37.6)
SNAPConnect® Right Angle Pigtailed Connector for General Use
Description
Solid Wire
Stranded Wire
Clear right angle terminal with 6 inch leads #12 AWG THHN/
THWN-2, 600V, Polycarbonate housing material
SNAP1RA
SNAP2RA
SNAP1RA
Note: See page Tech-10 for Power Indicating and Tamper-Resistant descriptions.
See page M-19 for SNAPConnect® technical information.
www.hubbell-wiring.com
.63"
(16.0)
Dimensions in Inches (mm)
®
Wiring Device-Kellems
M-13
SpikeShield® Power Quality Products
Straight Blade Isolated Ground Receptacles
Features and Benefits
Wrap-around, locked on brass
mounting strap provides additional
support strength for receptacle
assembly
Automatic self-grounding clip
assures ground continuity between
mounting strap and metal wall box
Green grounding screw
connected directly to
the grounding contacts
Straight blade 15A and 20A, 125V
duplex receptacles are available in
a variety of colors
Insulation barrier construction
— first patented by Hubbell —
isolates ground contacts from
the mounting strap
Amperage and voltage clearly
indicated
Back and side wiring capability
provides easy installation with
stranded or solid wire
Impact-resistant nylon face
Dimensionally stable, reinforced
thermoplastic polyester provides
impact strength in addition to
heat and flame resistance
IG5262
Isolated Ground Receptacles,
A “Clean” Path Provides A “Clean” Ground For Sensitive Equipment
In February 1968, Hubbell patented the first isolated ground
receptacle. Today – when a clean, noise-free ground is more
important than ever – Hubbell is still setting the standard.
Hubbell uses insulation barrier construction on many
models to isolate the ground contacts from the mounting
strap. The green grounding screw is connected directly
to the grounding contacts. In this way, ground contacts
are separated from the mounting strap and also from the
conventional grounding system. The isolated ground circuit
is completed by running a dedicated insulated ground wire
from the system ground buss to the green grounding screw.
M-14
®
And there’s more to the Hubbell line:
• Available in 19 NEMA configurations and a total of
60 different type receptacles.
• Versatility and mobility: With Hubbell’s grounding method,
Hubbell’s IG devices can be mounted in boxes, on metal
panels...almost anywhere.
• Hubbell quality: Every Hubbell IG device meets and
exceeds all applicable codes and standards, plus the
toughest standard of all...the Hubbell standard
of excellence.
IG triangle on the face of the
receptacle clearly indicates
isolated ground device.
Wiring Device-Kellems
www.hubbell-wiring.com
SpikeShield® Power Quality Products
Straight Blade Isolated Ground Receptacles
Ordering Information
1.33"
(33.8)
Hospital Grade ,
HBL® Extra Heavy Duty,
Isolated Ground Receptacles
Description
Color
Catalog Number
Flush, thermoplastic polyester face,
duplex, back and side wired,
multiple drive screws.
Orange
Red
IG8200
IG8200R
Style Line® decorator.
Orange
Ivory
White
—
—
—
Orange
IG8210
Flush, thermoplastic polyester face, single.
20A 125V
NEMA 5-20R
UL CSA
1 HP
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
2.73"
(69.3)
3.28"
(83.3)
IG8300
IG8300R
IG2182
IG2182I
IG2182WA
.80"
(20.3)
IG8200
IG8310
1.33"
(33.8)
15A and 20A, 125V
HBL® Extra Heavy Duty,
Specification Grade,
Isolated Ground Receptacles
20A 125V
NEMA 5-20R
UL CSA
1 HP
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
2.73"
(69.3)
3.28"
(83.3)
Description
Color
Catalog Number
Flush, nylon face, duplex,
back and side wired,
multiple drive screws.
Orange
Gray
Ivory
Red
White
IG5262
IG5262GY
IG5262I
IG5262R
—
IG5362
IG5362GY
IG5362I
IG5362R
IG5362W
Orange
Gray
Ivory
Red
White
IG5262WR
IG5262GYWR
IG5262IWR
IG5262RWR
—
IG5362WR
IG5362GYWR
IG5362IWR
IG5362RWR
IG5362WWR
Orange
Black
Blue
Gray
Ivory
Office White
White
CR5252IG
CR5252IGBK
—
CR5252IGGY
CR5252IGI
CR5252IGOW
CR5252IGW
CR5352IG
CR5352IGBK
CR5352IGBL
CR5352IGGY
CR5352IGI
CR5352IGOW
CR5352IGW
Style Line® decorator,
flush, nylon face,
back and side wired.
Orange
Gray
IG2152
—
IG2162
IG2162GY
4-PLEX® receptacle.
Orange
IG415
IG420*
1.05"
(26.7)
Flush, nylon face, single,
back and side wired.
Orange
IG5261
IG5361
CR5252IG
Weather Resistant, single,
Isolated ground.
Orange
IG5261WR
IG5361WR
Weather Resistant, duplex,
isolated ground.
Finder groove, nylon face, duplex,
back and side wired.
Note: *Not Fed. Spec. Listed.
See page Tech-10 for Weather Resistant description.
See page M-20 for isolated ground technical information.
See page A-46 and A-47 for accessories.
See page A-23 for 4-PLEX accessories.
.80"
(20.3)
IG5262
WR
1.33"
(33.8)
2.73"
(69.3)
3.28"
(83.3)
.80"
(20.3)
WR
3.38" (85.9)
3.02"
(76.7)
4.30" sq.
(109.2)
.92"
(23.4)
.1"
(2.5)
IG415
Dimensions in Inches (mm)
www.hubbell-wiring.com
®
Wiring Device-Kellems
M-15
SpikeShield® Power Quality Products
Straight Blade Isolated Ground Receptacles
Ordering Information
1.57"
(39.9)
1.32"
(33.6)
Hubbell-PRO Heavy Duty
Specification Grade
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
IG5352
Description
Color
Catalog Number
Smooth face, duplex,
back and side wired.
Orange
Almond
Gray
Ivory
Light Almond
White
IG5252
IG5252AL
IG5252GY
IG5252I
IG5252LA
IG5252W
IG5352
IG5352AL
IG5352GY
IG5352I
IG5352LA
IG5352W
Tamper-Resistant,
smooth face, duplex,
back and side wired.
Orange
Ivory
White
IG5252TR
IG5252ITR
IG5252WTR
IG5352TR
IG5352ITR
IG5352WTR
Note: See page Tech-10 for Tamper-Resistant description.
1.57"
(39.9)
1.32"
(33.6)
Commercial Specification Grade
Description
Color
Catalog Number
Smooth face, duplex,
side wired.
Orange
Almond
Gray
Ivory
Light Almond
White
IG15CR
IG15CRAL
IG15CRGRY
IG15CRI
IG15CRLA
IG15CRWHI
IG20CR
IG20CRAL
IG20CRGRY
IG20CRI
IG20CRLA
IG20CRWHI
Style Line® decorator;
smooth face; back and
side wired.
Orange
Almond
Gray
Ivory
Light Almond
White
IG15DR
IG15DRAL
IG15DRGRY
IG15DRI
IG15DRLA
IG15DRWHI
IG20DR
IG20DRAL
IG20DRGRY
IG20DRI
IG20DRLA
IG20DRWHI
2.73"
(69.3)
3.28"
(83.3)
20A 125V
NEMA 5-20R
UL CSA
1 HP
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
.83"
(21.1)
IG20CR
1.57"
(39.9)
1.30"
(32.9)
G
G
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
IG20DR
15A and 20A, 250V
HBL® Extra Heavy Duty,
Specification Grade,
Isolated Ground Receptacles
20A 250V
NEMA 6-20R
UL CSA
2 HP
15A 250V
NEMA 6-15R
UL CSA
1.5 HP
Description
Color
Catalog Number
Flush, nylon face, duplex,
back and side wired,
multiple drive screws.
Orange
IG5662
IG5462
Flush, nylon face, single.
Orange
IG5661
IG5461
2.25"
(57.15)
G
IP20
G
W
G
G
W
SUITABILITY
3.28"
(85.3)
3.68
(93.5)
1.81"
(46.0)
IG9308
M-16
30A 125V
NEMA 5-30R
UL CSA
2 HP
30A, 125V and 250V
Isolated Ground Receptacles
30A 125V
NEMA 5-30P
UL CSA
2 HP
Description
Color
Catalog Number
Single receptacle,
2 pole, 3 wire grounding.
Orange
IG9308
30A 250V
NEMA 6-30R
UL CSA
2 HP
30A 250V
NEMA 6-30P
UL CSA
2 HP
IG9330
Note: See page M-20 for isolated ground technical information.
®
Wiring Device-Kellems
www.hubbell-wiring.com
SpikeShield® Power Quality Products
Isolated Ground Twist-Lock® Receptacles
Features and Benefits
Insulation barrier construction
first patented by Hubbell isolates
ground contact from the
mounting strap
All-brass mounting and grounding
system provides a low resistance
ground path
Wire restraint recess for both
back and side wiring reduces
terminal loosening
High-impact, abuse-resistant
nylon face
Glass-filled thermoplastic
polyester base is heat and
impact resistant, providing
dimensional stability
and strength
Color-coding by voltage rating
helps ensure mating of proper
devices
One-piece contact with long
spring arm (low stress) and
oxide cutting nibs; prevents
stress and overheating
Boss diameter is 1.56 in. (39.6) on
20 and 30A devices, simplifying
installation
#10 silicon bronze terminal
screw provides excellent
strength and resistance to
corrosion and stripping
Automatic self-grounding clip
assures ground continuity
between mounting strap and
metal wall box
Accommodates both back
and side wiring
External back wiring allows visual
inspection of terminations
IG2310
Face color-coding by voltage facilitates locating and
mating of proper devices.
125V AC
www.hubbell-wiring.com
250V AC
480V AC
125/250V AC
®
Wiring Device-Kellems
M-17
SpikeShield® Power Quality Products
Isolated Ground Twist-Lock® Receptacles
Ordering Information
W
G
Y
15A, 125V and 250V
Back and Side Wired
1.70"
(43.2)
2.73"
(69.5)
3.28"
(83.3)
X
G
15A 125V
NEMA L5-15R
UL/CSA
15A 250V
NEMA L6-15R
UL/CSA
Description
Poles/Wires
Color
Catalog Number
Flush, RTP face, duplex.
2 pole, 3 wire
Orange
IG4700A*
IG4550A*
Flush, RTP face, single.
2 pole, 3 wire
Orange
IG4710
IG4560
Note: RTP is an abbreviation for reinforced thermoplastic polyester.
*Supplied with break-off tabs for split circuit wiring.
X
W
.95"
(24.1)
G
20A 125V
NEMA L5-20R
UL/CSA
1 HP
20A, 125V, 250V and 480V AC
Back and Side Wired
Description
Poles/Wires
Color
Catalog Number
Flush, nylon face, single.
2 pole, 3 wire
Orange
IG2310
20A 250V
NEMA L6-20R
UL/CSA
2 HP
IG2320
30A, 125V and 250V
Back and Side Wired
1.27"
(32.3)
G
30A 125V
NEMA L5-30R
UL/CSA
2 HP
Description
Poles/Wires
Color
Catalog Number
Flush, nylon face, single.
2 pole, 3 wire
Orange
IG2610
IG4710
1.23"
(31.2)
1.56"
(39.6)
2.67"
(67.8)
X
20A, 125V/250V and 3Ø 250V AC
Back and Side Wired
G
Y
Y
Z
20A 125/250V AC
NEMA L14-20R
UL/CSA
2 (1) HP
20A 3Ø 250V AC
NEMA L15-20R
UL/CSA
3 HP
Description
Poles/Wires
Color
Catalog Number
Flush, nylon face, single.
3 pole, 4 wire
Orange
IG2410
IG2420
2.38"
(60.5)
#6-32 TAP
IG2310
IG2620
W
X
G
.98"
(24.9)
30A 250V
NEMA L6-30R
UL/CSA
2 HP
X
G
3.28"
(83.3)
IG2340
Y
2.38"
(60.5)
1.70"
(43.2)
20A 480V AC
NEMA L8-20R
UL/CSA
3 HP
X
W
G
1.38"
(35.1)
Y
Y
IG4700A
3.28"
(83.3)
X
G
G
30A, 125V/250V and 3Ø 250V AC
Back and Side Wired
X
W
Y
Z
30A 125/250V AC
NEMA L14-30R
UL/CSA
2 (2) HP
30A 3Ø 250V AC
NEMA L15-30R
UL/CSA
3 HP
Description
Poles/Wires
Color
Catalog Number
Flush, nylon face, single.
3 pole, 4 wire
Orange
IG2710
IG2720
X
W
20A and 30A, 3ØY 120/208V AC
Back and Side Wired
Y
G
X
G
Y
W
G
Y
Z
Z
20A 3ØY
120/208V AC
NEMA L21-20R
UL/CSA
2 HP
30A 3ØY
120/208V AC
NEMA L21-30R
UL/CSA
3 HP
Description
Poles/Wires
Color
Catalog Number
Flush, nylon face, single.
4 pole, 5 wire
Orange
IG2510
IG2810
Note: See page M-20 for isolated ground technical information.
M-18
®
Wiring Device-Kellems
www.hubbell-wiring.com
SpikeShield® Power Quality Products
Surge Protection Device Specifications
Technical Information
SpikeShield® Surge Protection Plug Strips
PS350 Series
Operating Specifications
Max. Cont. Operating Voltage
Operating Frequency
Max Surge Current
Operating Temperature
130
50/60Hz
6.5kA
MPS1050 Series
PS350YL Series
PS1050 Series
PS2100 Series 6PS Series
130
130
130
130
50/60Hz
50/60Hz
50/60Hz
50/60Hz
19.5kA
6.5kA
19.5kA
39.0kA
------------------- -40°F to 160°F (-40°C to 70°C) ----------------------
HBLCATC
130
50/60Hz
30.0kA
24Vpk
50/60Hz
200
Performance
UL Voltage Protection Rating
EMI/RFI Noise Rejection
400V
n/a
400V
n/a
400V
n/a
400V
-20dB
400V
-20dB
500V
-20dB
45V
n/a
Warranty
Downline Warranty
$2,500
$2,500
$2,500
$2,500 (6PS1050)
$10,000 (all others)
$25,000
None
None
Physical Specifications
Housing Type
Color
ABS
Off. White
Metal
Off. White
Metal
Yellow
ABS
Off. White "USB"
version is Black
ABS
Off. White
Metal
Black
ABS
Off. White
Dimensions
HBL6PS350/1050 Series & HBL6PPS
Length
Width
Height
11.2" (284.5)
2.36" (59.9)
1.85" (47.0)
HBL7PS1050 Series
14.75" (374.7)
2.36" (59.9)
1.85" (47.0)
HBL6MPS Series
12.25" (311.2)
2.5" (63.5)
1.5" (38.1)
HBL6PS350YL
14.75" (374.7)
2.5" (63.5)
1.85" (47.0)
HBL8PS350YL
10.0" (254.0)
6.0" (152.4)
1.85" (47.0)
HBL8ESPS Series
10.4" (264.2)
3.8" (96.5)
1.44" (36.6)
HBL6RSPS Series
9.12" (231.6)
4.4" (111.8)
1.68" (42.7)
HBL4PS1050USB
10.38" (263.7)
3.81" (96.8)
1.44" (36.6)
Surge Protection Receptacles
Description
Part
Duplex / SNAPConnect®
4-PLEX®
Type – 2 Pole, 3 Wire, Grounding
Receptacle
Top
Base
Power Contact
Contact Design
Mounting Strap
Clamping Plate
15A/20A
Nylon
Nylon
.031" (.8) Brass
Tandem Modified Bypass
.050" (1.3) Steel-Zinc Coated
.031" (.8) Brass
Terminal Screws
Grounding Screw
Automatic Self-Grounding Clip
Mounting Screws
LED
Alarm Muting Screw
Brass #8-32 (Duplex only)
Steel (Green) (Duplex only)
Stainless Steel
Steel-Zinc Plated
Green
Nylon
15A/20A
Lexan®
Lexan®
.032" (.8) Brass
Triple Wipe
–
.031" (.8) Brass-Line Terminal Plate
.031" (.8) Brass-Neutral-Terminal Plate
Brass #8-32
Brass (Green)
.050" (1.3) Ground Plate
Brass
Green
–
Rating – 15A, 125V AC/20A, 125V AC
Certification – UL Listed File E2186
Listed to UL Standards 498 Receptacles
Meets UL1449-2.5
CSA Certified to Specification C22.2 No. 42
ANSI/IEEE C62.41 (IEEE 587)
Installation Categories “A" (Ring Wave)
“B" (Unidirectional Impulse)
Performance
Electrical
Duplex / SNAPConnect®
4-PLEX®
Frequency
Voltage
Response Time
Protection Modes
Transient Suppression
Normal Mode (L-N)
Common Mode (L-G), (N-G)
UL Voltage Protection Rating
EMI/RFI Attenuation at 50 Ohms Normal Mode
Operating Temperature
Flammability
60Hz
120V AC + 10%–15%
Approximately 5 ns
Normal and Common Modes
Peak Energy (10 X 100 μs)
Peak Current (8 X 20 μs)
240 joules
15000A
240 joules
15000A
600 L-N, 600 L-G
1000 N-G
-40 dB
32°F to 140°F (0°C to 60°C)
UL 94V-2
60Hz
20V AC + 10%–15%
Approximately 5 ns
Normal and Common Modes
Peak Energy (10 X 100 μs) Peak Current (8 X 20 μs)
80 joules
6500A
80 joules
6500A
600 L-N, 600 L-G
900 N-G
www.hubbell-wiring.com
®
-40°F to 140°F (-40°C to 60°C)
UL 94V-2
Wiring Device-Kellems
M-19
SpikeShield® Power Quality Products
Isolated Ground Device Specifications
Technical Information
IG5262
Specifications
IG5352
Receptacle
Part
Description
Typical Specification – Catalog Number IG5262
Manufacturer’s Identification – Hubbell IG5262
Description – Isolated Ground, Straight Blade, Duplex Receptacle
Type – 2 Pole, 3 Wire, Grounding
Rating – 15A, 125V
Certification – UL Listed, CSA Certified, Fed. Spec.
Receptacle
Top
Base
Triple Wipe Power Contacts
Wire Clamp
Mounting Strap
Insulator
Terminal Screws
Grounding Screw
Center Assembly-Rivet
Automatic Self-Grounding Clip
Flat. Hd. Mtg. Screws
15A
Nylon
PET*
0.31" (8) Phosphor Bronze
0.062" (1.6) Steel Nickel Plated
0.050" (1.3) Brass
Nylon
Brass #8-32
Brass (Green)
Brass
Stainless Steel
Steel Zinc Plated
Note: *Polyethylene Terephthalate Polyester.
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V or as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles
of overload at 150% of rated direct current.
Mechanical
Terminal Identification
Terminals identified in accordance with UL 498 and
CSA C22.2 No. 42 (Brass, White, Green).
#14-10 AWG standard or solid copper conductor only.
Ratings are permanent part of device.
Terminal Accommodation
Product Identification
Environmental – Material
Flammability
Operating Temperatures
Top: UL 94V-2, Base: UL 94V-0 and UL 94-5 VA.
Maximum continuous 75°C;
minimum -40°C/F (w/o impact) maximum (167°F, 75°C).
Specifications
Receptacle
Part
Description
Catalog Number – IG5352, IG15CR, IG15DR
Description – Isolated Ground, Straight Blade Duplex, Receptacle
Type – 2 Pole, 3 Wire, Grounding
Rating – 15A, 125V
Certification – UL Listed, CSA Certified
Receptacle
Top
Base
Power Contacts
Terminal Clamp
Grounding Screw
Mounting Strap
Auto Ground
Mounting Screws
15A
Nylon
Nylon
.030" (.8) Brass
.062" (1.6) Nickel Plated Steel
#8-32 Plated Steel, TriDrive
.040" (1) Galvanized Steel
Stainless Steel
Zinc Plated Steel, Self-Tapping
Performance
Electrical
Dielectric Voltage
Maximum Working Voltage
Current Interrupting
Temperature Rise
Withstands 2000V Minimum.
125V.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload
at 150% of rated direct current.
Mechanical
Terminal Identification
Terminals identified in accordance with UL 498 and
CSA C22.2 No. 42 (Brass, White, Green).
#14-10 AWG stranded or solid copper conductors only.
Ratings are a permanent part of the device.
Terminal Accommodation
Product Identification
Environmental – Material
Flammability
Operating Temperatures
M-20
UL 94V-2.
Max. continuous: 75°C; Min. continuous: -40°C w/o impact.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Section N
Wallplates and Covers
Index
Features and Benefits
Product
Page
Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-2
Snap-On Wallplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-4
Toggle Switch Wallplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-5
Duplex and Single Receptacle Wallplates. . . . . . . . . . . . . . . . . . . . . . . . . . .N-6
Single Receptacle Wallplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-7
Blank Wallplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-8
347 Volt Wallplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-9
Decorator Wallplates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-10
Combination Wallplates, 2-Gang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-11
Nylon Wallplates
Combination Wallplates, 3-Gang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-13
Combination Wallplates, 4- and 5-Gang . . . . . . . . . . . . . . . . . . . . . . . . . . .N-14
Telephone and Coaxial Outlet Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-15
Jumbo, Metal Wallplates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-16
Pre-Marked “EMERGENCY” and Barrel Key Switch Wallplates . . . . . . . . .N-17
Pre-Marked “ISOLATED GROUND” or “COMPUTER ONLY” Wallplates . . . . N-18
Security Wallplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-19
Accessories and Selection Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-20
Weatherproof Plates for Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-21
Weatherproof Plates for Receptacles and Switches . . . . . . . . . . . . . . . . .N-22
Metal Wallplates
Weatherproof Covers for Flanged Devices . . . . . . . . . . . . . . . . . . . . . . . . .N-23
Weatherproof Switch Plates, Covers and Locking Covers . . . . . . . . . . . .N-24
Heavy Duty Weatherproof Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-25
Weatherproof Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-26
Extra Duty Metallic While-In-Use Covers . . . . . . . . . . . . . . . . . . . . . . . . . .N-27
While-In-Use Weatherproof Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-28
Screws and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-29
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-30
Wallplate Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-31
Custom Metal Wallplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .N-32
www.hubbell-wiring.com
®
Weatherproof Covers
Wiring Device-Kellems
N-1
Wallplates
Nylon Wallplates
Features and Benefits
Nylon Wallplates
Our line of nylon wallplates features larger standard sized wallplates to
provide extra coverage to hide rough box opening, improved aesthetics,
greater strength, impact resistance, along with excellent cleanability in all
different types of environments.
• Standard size is ¹⁄₈ inch larger to give you extra coverage to hide
rough box openings. Also available in mid-size and pre-marked.
• Curved corners for improved aesthetics, for use in any application.
• Reinforcement ribs for extra strength.
• Captive screw feature holds mounting screw in place for quick and
easy installation.
• High-impact, self-extinguishing nylon material, which is virtually
unbreakable.
• Smooth, easy to clean finish is highly resistant to solvents and
cleaning solutions, providing long life in the harshest environments.
Hubbell’s standard sized wallplates are ¹⁄₈ inch larger to provide you that extra coverage to hide rough box openings.
The depth is ¼ inch so that it will comfortably fit over the device even on imperfect installations or on retrofit work.
Nylon Wallplates
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
White
Nylon Pre-Marked Wallplates
Blue
Ivory
Orange
Red
Metal Wallplates
Aluminum
N-2
Brass
Pre-Marked
Brass Plated
Chrome
®
Stainless Steel
Wiring Device-Kellems
Stainless Steel
www.hubbell-wiring.com
Wallplates
Metal Wallplates and Extra-Duty Metallic While-In-Use Covers
Features and Benefits
Protective plastic film helps to prevent
scratches and damage.
Stainless Steel
Provide solutions for a variety of industrial and commercial
applications.
• Environments subjected to heavy abuse.
• The 302/304 type stainless steel wallplates are ideal for
highly corrosive environments such as food processing,
hospitals, static free requirements and more.
Non-magnetic: 18.0% Chromium
8.0% Nickel
• Standard commercial use.
• The 430 type stainless steel wallplates are aesthetically
identical to the 302/304 type stainless steel wallplates
and are best suited for environments where corrosion
resistance is less critical.
Magnetic: 17.0% Chromium
Less than 0.5% Nickel
Smooth Solid Brass
• Provides a plush appearance with the durability of metal.
• Finish is lacquer coated to inhibit oxidation.
Anodized Aluminum
• Non-magnetic and corrosion resistance for a wide range
of applications.
• Finish is lacquer coated to inhibit oxidation.
Extra-Duty Metallic While-in-Use Covers
These covers are designed for use whenever protection is required while an
outlet is in use. Covers meet or exceed the extra-duty rating per UL 514D,
and are NEMA 3R rated.
• Die-cast aluminum construction
• Powder coated “chip resistant” paint corrosion protection
• Unique plug management provision for securing device and cord
2014 National Electrical Code (NEC®) Requirement
406.9 Receptacles in Damp or Wet Locations.
406.9 Receptacles in Damp or Wet Locations.
(B) Wet Locations.
(1) 15 and 20 Ampere Receptacles in a Wet Location. 15 and 20 ampere, 125
and 250 volt receptacles installed in a wet location shall have an enclosure that is
weatherproof whether or not the attachment plug cap is inserted. An outlet box
hood installed for this purpose shall be listed, and shall be identified as “extra-duty.”
All 15 and 20 ampere, 125 and 250 volt nonlocking-type receptacles shall be listed
weather-resistant type.
Exception: 15 and 20 ampere, 125 through 250 volt receptacles installed in a wet
location and subject to routine high-pressure spray washing shall be permitted to
have an enclosure that is weatherproof when the attachment plug is removed.
(2) Other Receptacles. All other receptacles installed in a wet location shall comply
with (B)(2)(a) or (B)(2)(b).
(a) A receptacle installed in a wet location, where the product intended to be
plugged into it is not attended while in use, shall have an enclosure that is
weatherproof with the attachment plug cap inserted or removed.
(b) A receptacle installed in a wet location where the product intended to be
plugged into it will be attended while in use (e.g., portable tools) shall have an
enclosure that is weatherproof when the attachment plug is removed.
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-3
Wallplates
Snap-On Wallplates
More Style In a Snap
Snap-on wallplates offer a clean, elegant look that can be
installed in seconds. Screw the mounting plate onto the
device and press the snap-on cover into place.
Snap-On Subplate
Snap-On Cover Plate
4.63"
(117.6)
4.63"
(117.6)
2.88"
(73.2)
0.13"
(3.3)
2.88"
(73.2)
Snaps
0.13"
(3.3)
Snap-On Wallplates
Description
Color
Decorator
Catalog Number
Toggle
Catalog Number
1-Gang, 1-Decorator
1-Gang, 1-Toggle Style
Ivory
Light Almond
White
RCW1I
RCW1LA
RCW1W
RFW1I
–
RFW1W
2-Gang, 2-Decorator
2-Gang, 2-Toggle Style
Ivory
Light Almond
White
RCW2I
RCW2LA
RCW2W
RFW2I
–
RFW2W
3-Gang, 3-Decorator
3-Gang, 3-Toggle Style
Ivory
Light Almond
White
RCW3I
RCW3LA
RCW3W
RFW3I
–
RFW3W
4-Gang, 4-Decorator
Ivory
Light Almond
White
RCW4I
RCW4LA
RCW4W
–
–
–
5-Gang, 5-Decorator
Ivory
Light Almond
White
RCW5I
RCW5LA
RCW5W
–
–
–
6-Gang, 6-Decorator
Ivory
Light Almond
White
RCW6I
RCW6LA
RCW6W
–
–
–
Dimensions in Inches (mm)
N-4
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Toggle Switch Wallplates
Toggle Switch Wallplates
Description
Color
Nylon
Standard
Nylon
Mid-Size
1-Gang, 1-Toggle
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
Black
Brown
Gray
Ivory
Light Almond
Office White
White
NP1AL
NP1BK
NP1
NP1GY
NP1I
NP1LA
NP1OW
NP1R
NP1W
NP2AL
NP2BK
NP2
NP2GY
NP2I
NP2LA
NP2OW
NP2R
NP2W
NP3AL
NP3BK
NP3
NP3GY
NP3I
NP3LA
NP3OW
–
NP3W
NP4BK
NP4
NP4GY
NP4I
NP4LA
NP4OW
NP4W
NPJ1AL
NPJ1BK
NPJ1
NPJ1GY
NPJ1I
NPJ1LA
NPJ1OW
NPJ1R
NPJ1W
NPJ2AL
NPJ2BK
NPJ2
NPJ2GY
NPJ2I
NPJ2LA
NPJ2OW
NPJ2R
NPJ2W
NPJ3AL
NPJ3BK
NPJ3
NPJ3GY
NPJ3I
NPJ3LA
NPJ3OW
NPJ3R
NPJ3W
NPJ4BK
NPJ4
NPJ4GY
NPJ4I
NPJ4LA
NPJ4OW
NPJ4W
5-Gang, 5-Toggle
Black
Brown
Gray
Ivory
Light Almond
White
NP5BK
NP5
NP5GY
NP5I
NP5LA
NP5W
6-Gang, 6-Toggle
Brown
Gray
Ivory
Light Almond
White
NP6
NP6GY
NP6I
NP6LA
NP6W
–
–
–
–
–
–
–
–
–
–
–
–
–
7-Gang, 7-Toggle
Almond
Brown
Gray
Ivory
White
–
–
–
–
–
–
–
–
–
–
8-Gang, 8-Toggle
Almond
Brown
Gray
Ivory
White
–
–
–
–
–
2-Gang, 1-Toggle
Almond
Brown
Gray
Ivory
White
–
–
–
–
–
2-Gang, 2-Toggle
3-Gang, 3-Toggle
4-Gang, 4-Toggle
Material
Metal
Catalog Number
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SA1
SB1
SBP1
SCH1
SS1
SS1L
SP1AL*
SP1G*
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SA2
SB2
SBP2
SCH2
SS2
SS2L
SP2AL*
SP2G*
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
SB3
SBP3
SCH3
SS3
SS3L
SP3AL*
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
SB4
SBP4
SS4
SS4L
SP4AL*
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SB5
SS5
–
SP5AL*
SB6
SS6
–
SP6AL*
SS607
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS608
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
SS740
–
Note: All standard and mid-size nylon wallplates feature pre-inserted captive screws for faster assembly, up to 6-gang.
Available as a custom wallplate, see pages N-32 to N-36. Consult custom wallplates section for additional openings and combinations.
*Powder coat paint finish.
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-5
Wallplates
Duplex and Single Receptacle Wallplates
Duplex Receptacle Wallplates
Description
Color
Nylon
Standard
Nylon
Mid-Size
1-Gang, 1-Duplex
Almond
Black
Blue
Brown
Gray
Ivory
Light Almond
Office White
Orange
Red
White
Black
Brown
Gray
Ivory
Light Almond
Office White
Orange
Red
White
Brown
Ivory
White
NP8AL
NP8BK
–
NP8
NP8GY
NP8I
NP8LA
NP8OW
NP8OR
NP8R
NP8W
NP82BK
NP82
NP82GY
NP82I
NP82LA
NP82OW
NP82OR
NP82R
NP82W
NP83
NP83I
NP83W
NPJ8AL
NPJ8BK
NPJ8BL
NPJ8
NPJ8GY
NPJ8I
NPJ8LA
NPJ8OW
–
NPJ8R
NPJ8W
NPJ82BK
NPJ82
NPJ82GY
NPJ82I
NPJ82LA
NPJ82OW
–
NPJ82R
NPJ82W
–
–
–
4-Gang, 4-Duplex
Brown
Ivory
White
NP84
NP84I
NP84W
2-Gang, 1-Duplex
–
–
–
–
2-Gang, 2-Duplex
3-Gang, 3-Duplex
–
–
–
–
Material
Metal
Catalog Number
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SA8
SB8
SBP8
SCH8
SS8
SS8L
SP8AL*
SP8G*
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SA82
SB82
SBP82
SCH82
SS82
SS82L
SP82AL*
SP82G*
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
SS83
–
SP83AL*
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS84
–
–
–
–
–
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
SS748
–
Material
Metal
Catalog Number
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SA7
SB7
SBP7
SCH7
SS7
SS7L
SP7AL*
SP7G*
–
–
–
–
SS747
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS72
–
Single 15/20A Straight Blade or 15A Twist-Lock® Receptacle Wallplates
Description
Color
Nylon
Standard
Nylon
Mid-Size
1-Gang, 1-Single 1.40 in. (35.6) Dia. Hole
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
–
–
–
–
–
NP7BK
NP7
NP7GY
NP7I
NP7LA
NP7OW
NP7R
NP7W
–
–
–
–
–
NPJ7BK
NPJ7
NPJ7GY
NPJ7I
NPJ7LA
NPJ7OW
NPJ7R
NPJ7W
–
–
–
–
–
2-Gang, 1-Single 1.40 in. (35.6) Dia. Hole
2-Gang, 2-Single 1.40 in. (35.6) Dia. Hole
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Note: All standard and mid-size nylon wallplates feature pre-inserted captive screws for faster assembly, up to 6-gang.
Available as a custom wallplate, see pages N-32 to N-36. Consult custom wallplates section for additional openings and combinations.
*Powder coat paint finish.
N-6
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Single Receptacle Wallplates
Single 20/30A Twist-Lock® Receptacle Wallplates
Description
1-Gang, 1-Single
1.60 in. (40.6) Dia. Hole
Color
Nylon
Standard
Black
Brown
Gray
Ivory
Office White
Red
White
NP720BK
NP720
NP720GY
NP720I
NP720OW
NP720R
NP720W
Nylon
Mid-Size
Material
Metal
Catalog Number
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SA720
SB720
SS720
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
–
–
–
–
SS725
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
–
–
–
–
SS749
3-Gang, 2-Single
1.60 in. (40.6) Dia. Hole
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
SS320
3-Gang, 2-Single
1.74 in. (44.2) Dia. Hole
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
–
–
–
–
SS330
Color
Nylon
Standard
Nylon
Mid-Size
Material
Metal
Catalog Number
–
–
–
–
–
Black
Brown
Gray
Ivory
White
–
–
–
–
–
NP724BK
NP724
NP724GY
NP724I
NP724W
–
–
–
–
–
NPJ724BK
NPJ724
NPJ724GY
NPJ724I
NPJ724W
–
–
–
–
–
Black
Brown
Gray
Ivory
White
–
–
–
–
–
NP703BK
NP703
NP703GY
NP703I
NP703W
–
–
–
–
–
NPJ703BK
NPJ703
NPJ703GY
NPJ703I
NPJ703W
Aluminum
Brass
Chrome
S/S 302/304
S/S 430
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Aluminum
Brass
Chrome
S/S 302/304
S/S 430
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Aluminum
Brass
Chrome
S/S 302/304
S/S 430
Aluminum
Brass
Chrome
S/S 302/304
S/S 430
–
–
–
SS737
–
SA723
SCH723
SS723
SS723L
–
–
SCH702
SS702
–
–
–
–
–
SS703
SS703L
–
–
–
SS701
–
–
–
–
SS716
–
1-Gang, 1-Single
1.74 in. (44.2) Dia. Hole
2-Gang, 1-Single
1.60 in. (40.6) Dia.Hole
Single Receptacle Wallplates
Description
1-Gang, 1-Single
1.97 in. (50.0) Dia. Hole
1-Gang, 1-Single
2.16 in. (54.9) Dia. Hole
2-Gang, 1-Single
2.16 in. (54.9) Dia. Hole
2-Gang, 1-Single
2.16 in. (54.9) Dia. Hole
2-Gang, 1-Single
2.48 in. (63.0) Dia. Hole
2-Gang, 1-Single
2.66 in. (67.6) Dia. Hole
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Note: All standard and mid-size nylon wallplates feature pre-inserted captive screws for faster assembly, up to 6-gang.
Available as a custom wallplate, see pages N-32 to N-36. Consult custom wallplates section for additional openings and combinations.
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-7
Wallplates
Blank Wallplates
Blank Wallplates, Box Mount and Strap Mount
Color
Nylon
Standard
Nylon
Mid-Size
Material
Metal
Catalog Number
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
White
NP13AL
NP13BK
NP13
NP13GY
NP13I
NP13LA
NP13OW
NP13W
NPJ13AL
NPJ13BK
NPJ13
NPJ13GY
NPJ13I
NPJ13LA
NPJ13OW
NPJ13W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SA13A
SB13
SBP13
SCH13
SS13
SS13L
SP14BAL*
SP14BG*
Almond
Black
Brown
Gray
Ivory
Light Almond
White
NP23AL
NP23BK
NP23
NP23GY
NP23I
NP23LA
NP23W
NPJ23AL
–
NPJ23
–
NPJ23I
NPJ23LA
NPJ23W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SA23
SB23
SCH23
SS23
SS23L
SP24BAL*
SP24BG*
Brown
Ivory
White
NP33
NP33I
NP33W
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
SS33
–
SP34BAL*
Brown
Ivory
White
NP43
NP43I
NP43W
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS43
–
Black
Brown
Gray
Ivory
Office White
Red
White
NP14BK
NP14
NP14GY
NP14I
NP14OW
NP14R
NP14W
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SB14
SS14
SS14L
SP14AL*
SP14G*
Black
Brown
Gray
Ivory
Office White
Red
White
NP24BK
NP24
NP24GY
NP24I
NP24OW
NP24R
NP24W
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SS24
SS24L
SP24AL*
SP24G*
Brown
Ivory
White
NP34
NP34I
NP34W
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
SS34
–
SP34AL*
4-Gang, 4-Blank, Brown
Strap Mount
Ivory
White
NP44
NP44I
NP44W
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS44
–
Description
1-Gang,
1-Blank,
Box Mount
2-Gang,
2-Blank,
Box Mount
3-Gang,
3-Blank,
Box Mount
4-Gang,
4-Blank,
Box Mount
1-Gang,
1-Blank,
Strap Mount
2-Gang,
2-Blank,
Strap Mount
3-Gang,
3-Blank,
Strap Mount
Note: All standard and mid-size nylon wallplates feature pre-inserted captive screws for faster assembly, up to 6-gang.
Available as a custom wallplate, see pages N-32 to N-36. Consult custom wallplates section for additional openings and combinations.
*Powder coat paint finish.
N-8
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
347 Volt Wallplates
347 Volt Toggle Wallplates with 2.25" (57.2) Spacing Between Gangs, Stamped “347V”
Description
Color
Nylon
Catalog Number
Material
Metal
Catalog Number
1-Gang, 1-Toggle
2.25 in. (57.2) Spacing
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
SS1C
–
2-Gang, 2-Toggle
2.25 in. (57.2) Spacing
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
SS2C
–
3-Gang, 3-Toggle
2.25 in. (57.2) Spacing
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
SS3C
–
4-Gang, 4-Toggle
2.25 in. (57.2) Spacing
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
SS4C
–
5-Gang, 5-Toggle
2.25 in. (57.2) Spacing
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
SS5C
–
6-Gang, 6-Toggle
2.25 in. (57.2) Spacing
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
SS6C
–
347 Volt Decorator Wallplates
Description
Color
Nylon
Catalog Number
1-Gang, 1-Decorator
Black
Gray
Ivory
White
HPS1347BK
HPS1347GY
HPS1347I
HPS1347W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
2-Gang, 2-Decorator
Black
Gray
Ivory
White
HPS2347BK
HPS2347GY
HPS2347I
HPS2347W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
3-Gang, 3-Decorator
Ivory
White
HPS3347I
HPS3347W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
Material
Metal
Catalog Number
Note: All standard and mid-size nylon wallplates feature pre-inserted captive screws for faster assembly, up to 6-gang.
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-9
Wallplates
Decorator Wallplates
GFCI, Surge Receptacles and Style Line® Device Wallplates
Description
Color
Nylon
Standard
Nylon
Mid-Size
Material
Metal
Catalog Number
1-Gang, 1-Decorator
Almond
Black
Blue
Brown
Gray
Ivory
Light Almond
Office White
Red
White
NP26AL
NP26BK
–
NP26
NP26GY
NP26I
NP26LA
NP26OW
NP26R
NP26W
NPJ26AL
NPJ26BK
NPJ26BL
NPJ26
NPJ26GY
NPJ26I
NPJ26LA
NPJ26OW
NPJ26R
NPJ26W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SB26
SBP26
SCH26
SS26
SS26L
PHPS1AL*
PHPS1G*
2-Gang, 2-Decorator
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
NP262AL
NP262BK
NP262
NP262GY
NP262I
NP262LA
NP262OW
NP262R
NP262W
NPJ262AL
NPJ262BK
NPJ262
NPJ262GY
NPJ262I
NPJ262LA
NPJ262OW
NPJ262R
NPJ262W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SB262
SBP262
SCH262
SS262
SS262L
PHPS2AL*
PHPS2G*
3-Gang, 3-Decorator
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
NP263AL
NP263BK
NP263
NP263GY
NP263I
NP263LA
NP263OW
NP263R
NP263W
NPJ263AL
NPJ263BK
NPJ263
NPJ263GY
NPJ263I
NPJ263LA
NPJ263OW
NPJ263R
NPJ263W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
SBP263
SS263
–
PHPS3AL*
4-Gang, 4-Decorator
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
White
NP264AL
NP264BK
NP264
NP264GY
NP264I
NP264LA
NP264OW
NP264W
NPJ264AL
NPJ264BK
NPJ264
NPJ264GY
NPJ264I
NPJ264LA
NPJ264OW
NPJ264W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
SS264
–
PHPS4AL*
5-Gang, 5-Decorator
Black
Brown
Gray
Ivory
Light Almond
White
NP265BK
NP265
NP265GY
NP265I
NP265LA
NP265W
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
SS265
–
PHPS5AL*
6-Gang, 6-Decorator
Black
Brown
Gray
Ivory
Light Almond
White
NP266BK
NP266
NP266GY
NP266I
NP266LA
NP266W
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
SS266
–
PHPS6AL*
Note: All standard and mid-size nylon wallplates feature pre-inserted captive screws for faster assembly, up to 6-gang.
Available as a custom wallplate, see pages N-32 to N-36. Consult custom wallplates section for additional openings and combinations.
*Powder coat paint finish.
N-10
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Combination Wallplates, 2-Gang
Combination Wallplates, 2-Gang
Description
Color
Nylon
Standard
Nylon
Mid-Size
Material
Metal
Catalog Number
2-Gang, 1-Toggle, 1-Duplex
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
NP18AL
NP18BK
NP18
NP18GY
NP18I
NP18LA
NP18OW
NP18R
NP18W
NPJ18AL
NPJ18BK
NPJ18
NPJ18GY
NPJ18I
NPJ18LA
NPJ18OW
NPJ18R
NPJ18W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SBP18
SCH18
SS18
SS18L
SP18AL*
SP18G*
2-Gang, 1-Duplex, 1-Decorator
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
White
NP826AL
NP826BK
NP826
NP826GY
NP826I
NP826LA
NP826OW
NP826W
NPJ826AL
NPJ826BK
NPJ826
NPJ826GY
NPJ826I
NPJ826LA
–
NPJ826W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SB826
SS826
–
2-Gang, 1-Toggle, 1-Decorator
Almond
Black
Brown
Gray
Ivory
Light Almond
White
NP126AL
NP126BK
NP126
NP126GY
NP126I
NP126LA
NP126W
NPJ126AL
NPJ126BK
NPJ126
NPJ126GY
NPJ126I
NPJ126LA
NPJ126W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SB126
SBP126
SS126
SS126L
PJS126AL*
PJS126G*
2-Gang, 1-Duplex, 1-Telephone
.406 in. (10.3) Hole
Strap Mount
Black
Brown
Gray
Ivory
White
NP128BK
NP128
NP128GY
NP128I
NP128W
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
2-Gang, 1-Toggle, 1-Telephone
.406 in. (10.3) Hole
Strap Mount
Black
Brown
Gray
Ivory
Office White
White
NP112BK
NP112
NP112GY
NP112I
NP112OW
NP112W
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
2-Gang, 1-Decorator, 1-Telephone
.406 in. (10.3) Hole
Strap Mount
Black
Brown
Gray
Ivory
White
NP1226BK
NP1226
NP1226GY
NP1226I
NP1226W
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
2-Gang, 1-Single Receptacle
1.40 in. (35.6) Hole,
1-Duplex
Almond
Brown
Gray
Ivory
White
NP78AL
NP78
NP78GY
NP78I
NP78W
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS78
–
2-Gang, 1-Single Recept.
1.60 in. (40.6) Hole,
1-Duplex
Almond
Brown
Ivory
White
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS8720
–
Note: All standard and mid-size nylon wallplates feature pre-inserted captive screws for faster assembly, up to 6-gang.
Available as a custom wallplate, see pages N-32 to N-36. Consult custom wallplates section for additional openings and combinations.
*Powder coat paint finish.
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-11
Wallplates
Combination Wallplates, 2-Gang
Combination Wallplates, 2-Gang
Description
Color
Nylon
Standard
Nylon
Mid-Size
Material
Metal
Catalog Number
2-Gang, 1-Toggle, 1-Single Receptacle
1.40 in. (35.6) Hole
Black
Brown
Gray
Ivory
White
NP17BK
NP17
NP17GY
NP17I
NP17W
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS17
–
2-Gang, 1-Toggle, 1-Blank, Box Mount
Black
Brown
Gray
Ivory
Light Almond
White
NP113BK
NP113
NP113GY
NP113I
NP113LA
NP113W
–
NPJ113
–
NPJ113I
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS113
–
2-Gang, 1-Toggle, 1-Blank, Strap Mount
Black
Brown
Gray
Ivory
Light Almond
White
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS114
–
2-Gang, 1-Blank, 1-Duplex, Box Mount
Black
Brown
Gray
Ivory
Light Almond
White
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS138
–
2-Gang, 1-Blank, 1-Duplex, Strap Mount
Black
Brown
Gray
Ivory
Light Almond
White
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS148
–
2-Gang, 1-Blank, 1-Decorator, Box Mount
Black
Brown
Gray
Ivory
Light Almond
White
NP1326BK
NP1326
NP1326GY
NP1326I
NP1326LA
NP1326W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS1426*
–
2-Gang, 1-Telephone, .406 in. (10.3) Hole,
1-Blank, Strap Mount
Black
Brown
Gray
Ivory
White
NP1214BK
NP1214
NP1214GY
NP1214I
NP1214W
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
2-Gang, 1-Single Receptacle
1.40 in. (35.6) Hole
1-Blank, Strap Mount
Black
Brown
Gray
Ivory
White
NP147BK
NP147
NP147GY
NP147I
NP147W
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
–
NP138BK
NP138
NP138GY
NP138I
NP138LA
NP138W
–
NPJ138
–
NPJ138I
–
NPJ138W
–
–
–
–
–
–
–
–
–
–
–
–
NPJ1326BK
NPJ1326
NPJ1326GY
NPJ1326I
NPJ1326LA
NPJ1326W
Note: All standard and mid-size nylon wallplates feature pre-inserted captive screws for faster assembly, up to 6-gang.
Available as a custom wallplate, see pages N-32 to N-36. Consult custom wallplates section for additional openings and combinations.
*Strap Mount.
N-12
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Combination Wallplates, 3-Gang
Combination Wallplates, 3-Gang
Description
Color
Nylon
Standard
Nylon
Mid-Size
3-Gang, 2-Toggle, 1-Duplex
Brown
Gray
Ivory
Light Almond
White
NP28
NP28GY
NP28I
NP28LA
NP28W
NPJ28
–
NPJ28I
NPJ28LA
NPJ28W
3-Gang, 1-Toggle, 2-Duplex
Black
Brown
Gray
Ivory
White
NP182BK
NP182
NP182GY
NP182I
NP182W
3-Gang, 2-Toggle, 1-Decorator
Black
Brown
Gray
Ivory
Light Almond
White
NP226BK
NP226
NP226GY
NP226I
NP226LA
NP226W
3-Gang, 1-Toggle, 2-Decorator
Black
Brown
Gray
Ivory
Light Almond
White
NP1262BK
NP1262
NP1262GY
NP1262I
NP1262LA
NP1262W
3-Gang, 2-Duplex, 1-Blank
Black
Brown
Gray
Ivory
Light Almond
White
3-Gang, 1-Duplex, 1-Blank, 1-Duplex
3-Gang, 2-Toggle, 1-Blank
–
–
–
–
–
NPJ226BK
NPJ226
NPJ226GY
NPJ226I
NPJ226LA
NPJ226W
Material
Metal
Catalog Number
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Almond
Steel, Gray
SBP28
SS28
–
SP28AL*
SP28G*
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS182
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
Steel, Gray
SS226
–
PJS226G*
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS211
–
Black
Brown
Gray
Ivory
Light Almond
White
–
–
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS8147
–
Black
Brown
Gray
Ivory
Light Almond
White
–
–
–
–
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS213
–
Note: All standard and mid-size nylon wallplates feature pre-inserted captive screws for faster assembly, up to 6-gang.
Available as a custom wallplate, see pages N-32 to N-36. Consult custom wallplates section for additional openings and combinations.
*Powder coat paint finish.
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-13
Wallplates
Combination Wallplates, 4- and 5-Gang
Combination Plates, 4- and 5-Gang
Description
Color
Nylon
Standard
Nylon
Mid-Size
Material
Metal
Catalog Number
4-Gang, 3-Toggle, 1-Duplex
Brown
Ivory
Light Almond
White
NP38
NP38I
NP38LA
NP38W
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS38
–
4-Gang, 3-Toggle, 1-Decorator
Black
Brown
Gray
Ivory
Light Almond
White
NP326BK
NP326
NP326GY
NP326I
NP326LA
NP326W
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS326
–
4-Gang, 2-Toggle, 2-Decorator
Black
Brown
Gray
Ivory
Light Almond
White
NP2262BK
NP2262
NP2262GY
NP2262I
NP2262LA
NP2262W
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
5-Gang, 4-Toggle, 1-Duplex
Brown
Ivory
White
NP48
NP48I
NP48W
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
Note: All standard and mid-size nylon wallplates feature pre-inserted captive screws for faster assembly, up to 6-gang.
Available as a custom wallplate, see pages N-32 to N-36. Consult custom wallplates section for additional openings and combinations.
N-14
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Telephone and Coaxial Outlet Plates
Telephone and Coaxial Outlet Plates
Description
Color
Nylon
Standard
Nylon
Mid-Size
Material
Metal
Catalog Number
1-Gang, 1-Tel Nylon .406 in. (10.3) Hole,
Metal .640 in. (16.3) Hole,
Box Mount
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
NP11AL
NP11BK
NP11
NP11GY
NP11I
NP11LA
NP11R
NP11W
NPJ11AL
–
NPJ11
–
NPJ11I
NPJ11LA
–
NPJ11W
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SS11*
SS11L*
1-Gang, 1-Tel Nylon .406 in. (10.3) Hole,
Metal .640 in. (16.3) Hole,
Strap Mount
Almond
Black
Brown
Gray
Ivory
White
NP12AL
NP12BK
NP12
NP12GY
NP12I
NP12W
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SB12*
SBP12*
SCH12*
SS12*
SS12L*
1-Gang, 1-Tel .625 in. (15.9) Hole,
Box Mount
Almond
Brown
Ivory
White
NP737AL
NP737
NP737I
NP737W
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
1-Gang, 1-Tel .625 in. (15.9) Hole,
Strap Mount
Brown
Ivory
White
NP730
NP730I
NP730W
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
1-Gang, 1-Tel .380 in. (9.7) Hole,
Box Mount or
Strap Mount
Almond
Brown
Ivory
White
–
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 302/304,
Strap Mount
S/S 430
SS739
SS738
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304,
Strap Mount
S/S 430
SS22*
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
SS741*
–
2-Gang, 2-Tel Nylon .406 in. (10.3) Hole,
Metal .640 in. (16.3) Hole,
Box Mount
2-Gang, 1-Tel .640 in. (16.3) Hole,
Box Mount
Black
Brown
Gray
Ivory
White
Almond
Brown
Ivory
White
NP21BK
NP21
NP21GY
NP21I
NP21W
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Note: All standard and mid-size nylon wallplates feature pre-inserted captive screws for faster assembly, up to 6-gang.
Available as a custom wallplate, see pages N-32 to N-36. Consult custom wallplates section for additional openings and combinations.
* .50" (12.7) I.D. nylon bushing provided.
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-15
Wallplates
Jumbo, Metal Wallplates
Jumbo, Smooth, Stainless Steel Type 302/304 Wallplates
Configuration
Catalog Number
Configuration
Catalog Number
1-Gang, 1-Toggle
SSJ1
1-Gang, 1-Single Receptacle for
2.09–2.13 in. (53.1–54.1)
Dia. Face
SSJ723
2-Gang, 2-Toggle
SSJ2
1-Gang, 1-Blank, Box Mount
SSJ13
1-Gang, 1-Duplex
SSJ8
1-Gang, 1-Telephone Opening,
.640 in. (16.3) Box Mount
SSJ11*
2-Gang, 2-Duplex
SSJ82
2-Gang, 1-Toggle, 1-Duplex
SSJ18
1-Gang, 1-Decorator
SSJ26
2-Gang, 1-Toggle, 1-Decorator
SSJ126
2-Gang, 2-Decorator
SSJ262
3.50"
(88.9)
1-Gang, 1-Single Receptacle for
1.36–1.39 in. (34.5–35.3)
Dia. Face
SSJ7
5.25"
(133.4)
Note: *.50 in. (12.7) I.D. nylon bushing provided.
Specifications are subject to change without notice.
Jumbo Wallplate
Oversize dimensions (see page N-31 for more details).
1-Gang, 5.25 in. x 3.50 in. (133.4 x 88.9).
2-Gang, 5.25 in. x 5.31 in. (133.4 x 134.9).
3-Gang, 5.25 in. x 7.12 in. (133.4 x 180.8).
Dimensions in Inches (mm)
N-16
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Pre-Marked “EMERGENCY” and Barrel Key Switch Wallplates
Pre-Marked “EMERGENCY” Wallplates
Description
Color
Nylon
Standard
Nylon
Mid-Size
1-Gang, 1-Duplex, paint filled
white lettering
Red
–
NPJ8RMEV
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
SS8MEV
–
1-Gang, 1-Toggle, paint filled
white lettering
Red
–
NPJ1RME
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
SS1ME
–
2-Gang, 2 Duplex, paint filled
red lettering
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
SS82MEV
–
Material
Metal
Catalog Number
Note: See page N-31 for mid-size plate dimensions.
All lettering .25 in. (6.3) high.
Stainless Steel Barrel Key Switch Wallplates
Description
Stainless steel,
302/304, smooth.
1-Gang, with
on/off markings
1-Gang, with
position markings
2-Gang, with
on/off markings
2-Gang, with
position markings
SS12RKL
SS12RKLM
SS22RKL
SS22RKLM
Note: See page D-6 for barrel key switch selection.
Single Count Screws and Accessories
Description
Catalog Number
Stainless steel screw, standard slot, .38 in. (9.7) long.
HBL7341SS
Security spanner head screws, 6-32 thread, 100 count.
HBL7342RKL
Screwdriver with spanner head security bit.
HBL7372RKL
HBL7342RKL
HBL7372RKL
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-17
Wallplates
Pre-Marked Wallplates
Pre-Marked “ISOLATED GROUND” Wallplates
Description
Color
Nylon
Standard
Nylon
No Marking
1-Gang, 1-Duplex, paint filled black
Orange
NP8OIG
NP8OR
1-Gang, 1-Decorator, paint filled black
Orange
NP26OIG
1-Gang, 1-Single Recept. 1.40 in. (35.6)
Hole for 1.36–1.39 in. (34.5–35.3)
Dia. face, paint filled black
Orange
1-Gang, 1-Single Recept. 1.60 in. (40.6)
Hole for 20 and 30A Twist-Lock®
with 1.55–1.58 in. (39.4–40.1)
Dia. face, paint filled black
Orange
Metal
Catalog Number
Material
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
NP7OIG
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
NP720OIG
–
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
Pre-Marked “COMPUTER ONLY” Wallplates
Nylon
Standard
Nylon
Mid-Size
Metal
Catalog Number
Description
Color
Material
1-Gang, 1-Duplex, paint filled black
Orange
Ivory
–
–
NPJ8CO
NPJ8C
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
2-Gang, 2-Duplex, paint filled black
Orange
–
NPJ82CO
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
1-Gang, 1-Decorator, paint filled black
Blue
Ivory
–
–
NPJ26CBL
NPJ26C
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
–
–
–
–
–
–
Color
Nylon
Standard
Nylon
Mid-Size
–
–
–
–
–
–
–
–
–
–
Louver Plate, 1-Gang, Box Mount
Description
1-Gang, Vertical Mounted Louver
–
–
–
–
–
Material
Metal
Catalog Number
Aluminum
Brass
Brass Plated
Chrome
S/S 302/304
S/S 430
SB771
SBP771
SS771
–
Note: *See page N-31 for mid-size plate dimensions.
Available as a custom wallplate, see pages N-32 to N-36. Consult custom wallplates section for additional openings and combinations.
N-18
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Security Wallplates
1-Gang, White
Description
Catalog Number
1-Toggle switch
SWP1
1-Duplex receptacle
SWP8
1-GFCI/Style
Line®
SWP26
opening
1-Telephone or TV opening .640 in. (16.3)
SWP12
1-Blank
SWP13
SWP1
SWP8
SWP82
SWP18
2-Gang, White
Description
Catalog Number
2-Toggle switches
SWP2
2-Duplex receptacles
SWP82
1-Toggle switch, 1-Duplex receptacle
SWP18
2-GFCI/Style Line® openings
SWP262
1-Toggle switch, 1-GFCI/Style Line® opening
SWP126
1-Duplex receptacle, 1-Telephone or TV
SWP812
1-Duplex receptacle, 1-Blank
SWP813
2-Blank
SWP23
3-Gang, White
Description
Catalog Number
2-Toggle switches, 1-Duplex receptacle
SWP28
SWP28
A
D
C
E
G
F
B
H
Dimensions
1-Gang
in. (mm)
2-Gang
in. (mm)
3-Gang
in. (mm)
A
3.77"
(95.8)
5.52"
(140.2)
7.39"
(187.71)
B
5.52"
(140.2)
5.52"
(140.2)
5.52"
(140.21)
C
.55"
(14.0)
.55"
(14.0)
.55"
(14.0)
D
3.37"
(85.6)
5.13"
(130.3)
7.00"
(177.8)
E
5.13"
(130.3)
5.13"
(130.3)
5.13"
(130.3)
F
1.00"
(25.4)
1.00"
(25.4)
1.00"
(25.4)
G
4.63"
(117.6)
4.63"
(117.6)
4.63"
(117.6)
H
2.88"
(73.2)
4.63"
(117.6)
6.50"
(165.1)
Specifications
Tamper resistant wallplate 1-gang duplex receptacle shall be of the following construction:
Cover plate: One piece #14 cold rolled zinc
plated steel. Plate shall have a five stage baked
white polyester powder enamel finish. Gloss:
85%; reflectance: 93%; hardness minimum:
2H and pass 600 hour salt spray test.
Back plate: #10 cold rolled galvanized steel.
Plate assembly shall use four (4) #8-32 X ½ inch
stainless steel T-15 TORX® head screws with
center pin reject. Plate must be UL listed to
UL 514D and comply with the NEC®.
TORX® is a registered trademark of Textron Inc.
NEC® is a registered trademark of the The National Electrical Code.
www.hubbell-wiring.com
Dimensions in Inches (mm)
®
Wiring Device-Kellems
N-19
Wallplates
Accessories and Selection Charts
Brass Locking Cover Plate
Description
Catalog Number
Locking cover plate for single 15 and 20A straight blade
receptacles and 15A Twist-Lock® receptacles.
Straight cylinder type lock. All cylinder locks keyed alike.
HBL96067
Weather Shield Plate
HBL96067
Shown with receptacle
(sold separately)
Description
Catalog Number
20° angle plate for duplex receptacles.
HBL6187
HBL6187
Shown with receptacle
and back box
(sold separately)
Catalog Number of Receptacles in Groups A through E below
Group A
Group B
Group C
Group D
Group E
Boss diameter
1.36" to 1.39"
(34.5 to 35.3)
Boss diameter
1.55" to 1.58"
(39.4 to 40.1)
Boss diameter
1.68" to 1.72"
(42.7 to 43.7)
Boss diameter
2.09" to 2.13"
(53.1 to 54.1)
Boss diameter
2.28" to 2.44"
(57.9 to 62.0)
HBL23000HG
HBL23030
HBL4560
HBL4710
HBL4760
HBL5251
HBL52CM61
HBL5261
HBL53CM61
HBL5361
HBL5461
HBL5552B
HBL5661
HBL6810
HBL7210B
HBL7250
HBL7310B
HBL7310BG
HBL7535
HBL7582
HBL8210
HBL8310
HBL8410
HBL8420
HBL23CM10
HBL2310
HBL2320
HBL2330
HBL2340
HBL2410
HBL2420
HBL2430
HBL2440
HBL2450
HBL2460
HBL2510
HBL2520
HBL2530
HBL26CM10
HBL2610
HBL2620
HBL2630
HBL2640
HBL2650
HBL2710
HBL2720
HBL2730
HBL2740
HBL2750
HBL2760
HBL2770
HBL2810
HBL2820
HBL2830
HBL3330
HBL3330G
HBL3430
HBL3430G
HBL3520
HBL7410B
HBL7410BG
HBL45105
HBL45205
HBL45305
HBL45905
HBL7962
HBL9350
HBL9308
HBL9315
HBL9330
HBL9360•
HBL9365•
HBL9367•
HBL7301A
HBL8330A
HBL8350A
HBL8430A
HBL8450A
HBL8460A
HBL9430A
HBL9450A
HBL9460A
Note: •50A 2P 3W.
Wallplates for Single Receptacles
Description
Smooth nylon, brown.
Group A
Group B
Group C
Group D
Group E
Boss diameter
1.36" to 1.39"
(34.5 to 35.3)
1-Gang
2-Gang
Boss diameter
1.55" to 1.58"
(39.4 to 40.1)
1-Gang
2-Gang
Boss diameter
1.68" to 1.72"
(42.7 to 43.7)
1-Gang
2-Gang
Boss diameter
2.09" to 2.13"
(53.1 to 54.1)
1-Gang
2-Gang
Boss diameter
2.28" to 2.44"
(57.9 to 62.0)
2-Gang
NP7*
–
Cast aluminum.
HBL7320
Stainless steel,
302/304, smooth.
SS7**
–
SS72
NP720*
–
–
–
NP724*
HBL7320
–
SS720
–
NP703*
HBL3394
–
HBL9419
SS725
–
SS723
–
–
–
SS703
SS701
Note: See pages N-6 and N-7 for complete plate descriptions.
*Catalog number indicated is Brown, add with the following to designate color: “AL” (Almond), “BK” (Black), “GY” (Gray), “I” (Ivory), and “W” (white).
**Catalog number indicated is Stainless Steel, replace “SS” with the following prefix to designate material: “SA” for Anodized Aluminum, “SB” for Solid Brass.
Weatherproof Lift Covers for WDL “Closed” and WDL “Open”, Wet Locations, 1-Gang
Description
Group A
Group B
Group C
Group D
Boss diameter
1.36" to 1.39"
(34.5 to 35.3)
Boss diameter
1.55" to 1.58"
(39.4 to 40.1)
Boss diameter
1.68" to 1.72"
(42.7 to 43.7)
Boss diameter
2.09" to 2.13"
(53.1 to 54.1)
50A
Twist-Lock®
Receptacles
30A 4W
Hubbellock®
Receptacles
Thermoplastic, with
cover “open”, gray.
HBL7423WO
HBL7425WOA
HBL7424WO
–
HBL7774WO
–
Thermoplastic, with
cover “open”, yellow.
HBL74CM23WO
HBL74CM25WOA
HBL74CM24WO
–
HBL77CM74WO
–
Cast aluminum, with
cover “closed”.
HBL7420
HBL7420
HBL3393
HBL9420
HBL9425•
HBL7770
HBL20405†
HBL20446†
Note: •50A 2P 3W.
T
he “CS” versions of 50A Twist-Lock ® receptacles will only fit these thermoplastic plates.
†HBL20446 plate painted red for use with HBL20443 only. HBL20405 plate is for use with HBL20403 only. See page B-65 for devices.
N-20
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Weatherproof Covers for Receptacles
For FS/FD Box Mounting
IP44
SUITABILITY
For Receptacles with Face Diameters of 2.28–2.44 in. (57.9–62.0)
Description
Catalog Number
Thermoplastic, 2-gang, wet and damp locations with cover “closed”, gray.
HBL7777A
Thermoplastic, 2-gang, wet and damp locations with cover “closed”, yellow.
HBL77CM77A
Thermoplastic, 2-gang, wet and damp locations with cover “closed”, gray.
HBL7777
For Receptacles with Face Diameters of 2.09–2.13 in. (53.1–54.1)
HBL7777A
Description
Catalog Number
Cast aluminum, wet locations only when cover “closed” and damp locations.
HBL9420
Cast aluminum, no lift cover. NOT weatherproof.
HBL9419
For 50A Twist-Lock® Single Receptacles
Description
Catalog Number
Thermoplastic, wet and damp locations with cover “open”, gray.
HBL7774WO*
Thermoplastic, wet and damp locations with cover “open”, yellow.
HBL77CM74WO*
Cast aluminum, wet locations only when cover “closed” and damp locations.
HBL7770
Galvanized Steel, fits 4" square or 2-gang box.
HBL50SC**
Stainless steel, single gang, wallplate. NOT weatherproof.
SS750
HBL9420
For 30A, 4 Wire Hubbellock® Receptacles
Description
Catalog Number
Thermoplastic, wet and damp locations with cover “open”, gray.
HBL7428WOG*
Thermoplastic, wet and damp locations with cover “open”, yellow.
HBL7428WOY*
Thermoplastic, wet and damp locations with cover “open”, red.
HBL7428WOR*
Cast aluminum, wet locations only when cover “closed” and damp locations, lift cover plate.
HBL20405
Cast aluminum, wet locations only when cover “closed” and damp locations, red finish.
HBL20446
Cast aluminum, no lift cover. NOT weatherproof.
HBL20406
HBL7774WO
Note: W
ill fit FS/FD boxes having plate mounting holes on 3.25 in. x 3.75 in. (82.6 x 95.3) centers.
W
ill only fit old style porcelain face devices.
*The “CS” versions of 50A Twist-Lock ® will only fit these plates.
**IP20 Suitability.
Weatherproof Covers for Single Receptacles for Use on FS/FD Boxes
Note: All weatherproof plates are UL Listed for WET LOCATIONS WITH COVER CLOSED, for intermittent use in wet locations
or use in damp locations. Those with suffix “WO” are listed for WET LOCATIONS with cover open in continuous use.
All plates are gasketed and self-closing.
HBL7770
Accessories
Description
Catalog Number
Sub-plate for mounting and weatherproofing flanged devices with mounting
centers of 1.76", 1.94" or 2.13" such as HBL7556, HBL4716, etc. when used
with a HBL7420 or HBL7425WOA type weatherproof plate.
7452•
Adapter plate for mounting HBL7423WO, HBL7424WO, HBL7425WOA or
HBL7420 plates to standard boxes.
HBL7349 •
Note: •Not UL Listed.
HBL20405
2.84"
(72.1)
.19" (4.8)
DIA.
4 HOLES
2.00"
(50.8)
8-Holes
.16" (4.1)
Dia.
4.56"
(115.8)
3.28"
(83.3)
1.56"
(39.6)
2.13"
(54.1) 3.63"
(92.2)
H
U
B
B
E
L
L
3.25"
(82.6)
1.88"
(47.8)
3.31"
(84.0)
7452
www.hubbell-wiring.com
HBL7349
Typical Plate, 1-Gang
®
Wiring Device-Kellems
Dimensions in Inches (mm)
N-21
Wallplates
Weatherproof Covers for Receptacles and Switches
Vertical, for FS/FD box mounting
IP44
For Receptacles with Face Diameters of 1.36–1.39 in. (34.5–35.3)
HBL7423WO
HBL7425WOA
SUITABILITY
Description
Catalog Number
Thermoplastic, wet and damp locations with cover “open”, gray.
HBL7423WO
Thermoplastic, wet and damp locations with cover “open”, yellow.
HBL74CM23WO
Cast aluminum, wet location only when cover “closed” and damp locations.
HBL7420
Cast aluminum, no lift cover, NOT weatherproof.
HBL7320
For Switches and Receptacles with Face Diameters of 1.55–1.58 in. (39.4–40.1)
Description
Catalog Number
Thermoplastic, wet and damp locations with cover “open”, gray.
HBL7425WOA
Thermoplastic, wet and damp locations with cover “open”, yellow.
HBL74CM25WOA
Thermoplastic, wet and damp locations with cover “open”, white.
HBL74CM25WOAW
Cast aluminum, wet and damp locations with cover “closed.”
HBL7420*
Cast aluminum, no lift cover, NOT weatherproof.
HBL7320
Thermoplastic, wet and damp locations with cover “open”, gray.
HBL7428WOG**
Thermoplastic, wet and damp locations with cover “open”, yellow.
HBL7428WOY**
Thermoplastic, wet and damp locations with cover “open”, red.
HBL7428WOR**
For Receptacles with Face Diameters of 1.68–1.72 in. (42.7–43.7)
HBL7420
Description
Catalog Number
Thermoplastic, wet and damp locations with cover “open”, gray.
HBL7424WO
Thermoplastic, wet and damp locations with cover “open”, yellow.
HBL74CM24WO
Cast aluminum, wet location only when cover “closed” and damp locations.
HBL3393
Cast aluminum, no lift cover, NOT weatherproof.
HBL3394
Note: *Cast aluminum lift cover with fibershield for standard toggle and PresSwitch® Switches.
**Features two #6-32 threaded inserts to back mount device to cover.
IP20 SUITABILITY.
All weatherproof lift cover plates on this page are UL Listed as “WDL Closed” for use in wet locations with cover closed
and in damp locations.
Weatherproof Covers for Single Receptacles on FS/FD Boxes
Note: All weatherproof plates are UL Listed for WET LOCATIONS WITH COVER CLOSED for intermittent use in wet locations or use in
damp locations. Those with suffix “WO” are listed for WET LOCATIONS with cover open in continuous use. All plates are gasketed
and self-closing.
2011 National Electrical Code (NEC®)
406.9 Receptacles in Damp or Wet Locations.
HBL7320
HBL7424WO
(A) Damp Locations. A receptacle installed outdoors in a location protected from the weather
or in other damp locations shall have an enclosure for the receptacle that is weatherproof when
the receptacle is covered (attachment plug cap not inserted and receptacle covers closed).
An installation suitable for wet locations shall also be considered suitable for damp locations.
A receptacle shall be considered to be in a location protected from the weather where located
under roofed open porches, canopies, marquees, and the like, and will not be subjected to
a beating rain or water runoff. All 15 and 20A, 125 and 250V nonlocking receptacles shall be
listed weather-resistant type. FPN: The types of receptacles covered by this requirement are
identified as 5-15, 5-20, 6-15 and 6-20 in ANSI/NEMA WD 6-2002,
2.84"
National Electrical Manufacturers Association Standard for
(72.1)
.19" (4.8)
DIA.
Dimensions of Attachment Plugs and Receptacles.
4 HOLES
(B) Wet Locations. 15 and 20A, 125 and 250V receptacles installed
in a wet location shall have an enclosure that is weatherproof
whether or not the attachment plug cap is inserted. For other
one or two family dwellings, an outlet box hood installed for this
purpose shall be listed, and where installed on an enclosure
supported from grade as described in 314.23(B) or as described
in 314.23(F) shall be identified as “extra-duty”. All 15 and 20A,
125 and 250V nonlocking type receptacles shall be listed
weather resistant type.
HBL3393
N-22
4.56"
(115.8)
H
U
B
B
E
L
L
3.25"
(82.6)
1.88"
(47.8)
3.31"
(84.0)
Typical Plate, 1-Gang
NEC® is a registered trademark of the The National Electrical Code.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Weatherproof Covers for Flanged Devices
For Flanged Inlets and Flanged Receptacles
IP44
Weatherproof Thermoplastic Cover
For Flanged Inlets and Flanged Receptacles
SUITABILITY
Description
Catalog Number
For use with 15 and 20A, 2 pole, 2 wire and 2 pole, 3 wire
Insulgrip® flanged inlets and flanged receptacles below.
WP1
Straight Blade, 2 pole, 3 wire
Flanged Inlets
Flanged Receptacles
HBL5278C
HBL5378C
HBL5478C
HBL5678C
HBL5279C
HBL5379C
HBL5479C
HBL5679C
Twist-Lock®, 2 pole, 2 wire and 2 pole, 3 wire
Flanged Inlets
Flanged Receptacles
HBL8815C
HBL7524C
HBL4716C
HBL4586C
HBL4786C
HBL8809C
HBL7526C
HBL4715C
HBL4585C
HBL4785C
Weatherproof Thermoplastic Cover
For Flanged Inlets and Flanged Receptacles
Description
Catalog Number
For 20 and 30A, 3, 4, and 5 wire Insulgrip flanged inlets
and flanged receptacles below.
WP2
Twist-Lock®, 2 pole, 3 wire; 3 pole, 4 wire; 4 pole, 4 wire; 4 pole, 5 wire
Flanged Inlets
HBL2315
HBL2325
HBL2335
HBL2345
HBL2355
HBL2415
HBL2425
HBL2435
HBL2445
HBL2455
HBL2465
HBL2515
HBL2525
HBL2535
HBL2615
HBL2625
HBL2635
HBL2645
HBL2655
HBL2715
HBL2725
HBL2735
HBL2745
HBL2755
HBL2765
HBL2775
HBL2815
HBL2825
HBL2835
HBL3325C
HBL3334C
HBL7408C
HBL2446
HBL2456
HBL2466
HBL2516
HBL2526
HBL2536
HBL2616
HBL2626
HBL2636
HBL2646
HBL2656
HBL2716
HBL2726
HBL2736
HBL2746
HBL2756
HBL2766
HBL2776
HBL2816
HBL2826
HBL2836
HBL3326C
HBL3335C
HBL7409C
WP1
Flanged Receptacles
HBL2316
HBL2326
HBL2336
HBL2346
HBL2356
HBL2416
HBL2426
HBL2436
WP2
Weatherproof Thermoplastic Cover
For Flanged Inlets 50 Amp CS Series
Description
Catalog Number
For 50A, 2 pole, 3 wire and 3 pole, 4 wire flanged inlets below.
HBL7780
Twist-Lock®, 2 pole, 3 wire; 3 pole, 4 wire
Flanged Inlets
CS6377
CS8275
CS8475
CS6375
CS8375
CS8175
HBL3777
HBL3775
HBL7958
HBL7780
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-23
Wallplates
Weatherproof Switch Plates, Covers and Locking Covers
IP44
SUITABILITY
Weatherproof Plates
HBL1795
Description
Catalog Number
Clear bubble plate, silicone rubber for use with all general purpose AC toggle and
PresSwitch® Switches. Fits both FS/FD and standard boxes.
HBL1795
Weatherproof Plates
Description
Gray neoprene
Catalog Number
PresSwitch®
Plate. Fits FS/FD and standard boxes.
Same as above except yellow.
HBL1750*
HBL17CM50*
Note: *Not UL Listed.
HBL1750
Weatherproof Plates
Description
Catalog Number
Gray neoprene PresSwitch® Plate with 125V red pilot light.
Fits only FS/FD boxes.
HBL1785*
Same as above except yellow.
HBL17CM85*
Note: *Not UL Listed.
HBL1785
Weatherproof Covers
Description
Catalog Number
Cast aluminum lift cover plate with fiber shield. For standard toggle and
PresSwitch® Switches. Fits only FS/FD boxes.
HBL7420
Brass Locking Covers Attachment for Switches
HBL7420
Description
Catalog Number
Straight keying (all locks alike) appropriate for most applications.
Straight cylinder type lock, each HBL96061 ordered operates
on the same key–all locks are keyed alike.
HBL96061*
Same as above except in dull chrome finish to match
stainless steel plates.
HBL96061DCH*
Straight keying (individual). Straight cylinder type lock, each HBL96062 ordered
operates on a different key. All locks are keyed differently and individually.
This type cannot be master keyed.
HBL96062*
Note: *Not UL Listed.
HBL96061
shown with wallplate and
switch (sold separately)
Locking Device
Description
Catalog Number
Locking device for weatherproof covers.
HBLWLC
HBLWLC
N-24
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Heavy Duty Weatherproof Covers for Duplex, GFCI,
Surge Receptacles and Style Line® Devices
IP44
SUITABILITY
Duplex Covers For Vertical Mounting
Description
Dimensions
Height x Width x Depth
Catalog Number
Thermoplastic, gray, for FS/FD box mounting.
4.56" x 2.89" x 1.08"
(115.8 x 73.4 x 27.4)
HBL5221
Thermoplastic, yellow, for FS/FD box mounting.
4.56" x 2.89" x 1.08"
(115.8 x 73.4 x 27.4)
HBL52CM21
Thermoplastic, white, for FS/FD box mounting.
4.56" x 2.89" x 1.08"
(115.8 x 73.4 x 27.4)
HBL52CM21W
Thermoplastic, gray, for device mounting.
4.56" x 2.89" x 1.08"
(115.8 x 73.4 x 27.4)
HBL5222
Thermoplastic, yellow, for device mounting.
4.56" x 2.89" x 1.08"
(115.8 x 73.4 x 27.4)
HBL52CM22
Die cast aluminum, gray, commercial grade,
vertical position, device mount.
4.56" x 2.81" x 0.75"
(115.8 x 71.4 x 19.1)
WP8V
HBL5221
WP8V
Duplex Covers For Horizontal Mounting
Description
Dimensions
Height x Width x Depth
Catalog Number
Cast aluminum, for device mounting.
2.88" x 4.56" x 0.79"
(73.2 x 115.8 x 20.1)
HBL5205WO
Cast aluminum, for FS/FD box mounting.
2.88" x 4.56" x 0.79"
(73.2 x 115.8 x 20.1)
HBL5206WO
Die cast aluminum, gray, commercial grade,
horizontal position, device mount.
2.90" x 4.60" x 0.75"
(73.7 x 116.8 x 19.1)
WP8H
HBL5206WO
WP8H
GFCI, Surge and Style Line® Covers
Description
Dimensions
Height x Width x Depth
Die cast aluminum, gray, commercial grade,
vertical position, device mount.
4.56" x 2.81" x 0.75"
(115.8 x 71.4 x 19.1)
WP26V
Die cast aluminum, gray, commercial grade,
horizontal position, device mount.
2.30" x 4.75" x 0.73"
(58.4 x 120.7 x 18.5)
WP26H
Catalog Number
WP26V
Toggle Cover
Description
Thermoplastic, gray, for FS/FD box mounting.
Dimensions
Height x Width x Depth
Catalog Number
HBL5201
4.56" x 2.89" x 1.08"
(115.8 x 73.4 x 27.4)
Note: All weatherproof plates are UL Listed for WET LOCATIONS WITH COVER CLOSED, for intermittent use in wet locations
or use in damp locations. Those with Suffix “WO” are listed for WET LOCATIONS with cover open in continuous use. All
plates are gasketed and self-closing.
www.hubbell-wiring.com
®
Wiring Device-Kellems
WP26H
N-25
Wallplates
Weatherproof Covers for Duplex, Single, GFCI,
Surge Receptacles and Style Line® Devices and Switches
1-Gang Weatherproof Covers for Vertical Mounting
RW51470
RW51550
Description
Dimensions
Height x Width x Depth
Zinc die cast, gray, duplex cover
for box mounting.
4.58" x 2.82" x 0.57"
(116.3 x 71.6 x 14.5)
RW51470
Zinc die cast, gray, 1.40 in. (35.6) cover
for single receptacle or toggle switch
for device mounting.
4.56" x 2.81" x 0.88"
(115.8 x 71.4 x 22.4)
RW51550*
Zinc die cast, gray, GFCI,
Surge and Style Line® cover
for device mounting.
4.58" x 2.81" x 0.57"
(116.3 x 71.4 x 14.5)
RW51040
Catalog Number
RW51040
1-Gang Weatherproof Covers for Horizontal Mounting
Description
Dimensions
Height x Width x Depth
Zinc die cast, gray, duplex cover
for device mounting.
2.82" x 4.57" x 0.79"
(71.6 x 116.1 x 20.1)
RW51810
Zinc die cast, gray, 1.40 in. (35.6) cover
for single receptacle or toggle switch
for device mounting.
2.81" x 4.56" x 0.99"
(71.4 x 115.8 x 25.1)
RW51520*
Zinc die cast, gray, GFCI,
Surge and Style Line® cover
for device mounting.
2.82" x 4.56" x 0.52"
(71.6 x 115.8 x 13.2)
RW51020
Catalog Number
RW51810
RW51520
RW51020
2-Gang Weatherproof Covers for Vertical Mounting
Description
Dimensions
Height x Width x Depth
Zinc die cast, gray, duplex cover
for device mounting.
4.54" x 4.54" x 0.75"
(115.3 x 115.3 x 19.1)
RW51320
Zinc die cast, gray, one duplex/one GFCI,
Surge and Style Line® cover
for box mounting.
4.54" x 4.54" x 0.77"
(115.3 x 115.3 x 19.6)
RW51330
Zinc die cast, gray, 1.40 in. (35.6) cover
for single receptacle or toggle switch
for device mounting.
4.54" x 4.54" x 0.77"
(115.3 x 115.3 x 19.6)
RW51380
Zinc die cast, gray, two GFCI,
Surge and Style Line® cover
for box mounting.
4.54" x 4.56" x 0.73"
(115.3 x 115.8 x 18.5)
RW51450
Catalog Number
RW51320
RW51330
RW51380
RW51450
N-26
Note: All weatherproof plates are UL Listed for WET LOCATIONS WITH COVER CLOSED, for intermittent use in wet
locations or use in damp locations. All plates are gasketed and self-closing.
*cULus Listed.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Extra-Duty Metallic While-In-Use Covers
For Maximum In-Use Protection
Features
Extra-Duty Metallic While-in-Use Covers are designed for
use whenever protection is required while an outlet is in use.
Covers meet or exceed the extra-duty rating per
UL 514D, and are NEMA 3R rated.
• Provision on each side for holding cords – Reduces pull-outs
• Padlockable – Accepts standard size padlocks
• Includes gasket and hardware
• Powder coated for corrosion protection
• Device or box mounting
• Superior commercial quality die-cast aluminum construction • NEMA 3R rated
• Meets or exceeds Extra-Duty rating in UL 514D
• Can be installed to comply with 2011 NEC 406.9(B)
• Unique lid design allows larger plugs and provides more
(See page N-22).
room for bend radius of electrical cords
1-Gang Extra-Duty Metallic While-In-Use Covers for Vertical Mounting
Description
Dimensions
Height x Width x Depth
While-in-Use cover, gray, 1-gang, duplex cover
for vertical mounting.
6.5" x 3.1" x 3.3"
(165.1 x 78.7 x 83.2)
WP8E
While-in-Use cover, gray, 1-gang, round hole 1.55"
or 2.10" cover, for vertical mounting.
6.5" x 4.5" x 3.3"
(165.1 x 114.3 x 83.2)
WP700E
While-in-Use cover, gray, 1-gang, GFCI cover
for vertical mounting.
6.5" x 3.1" x 3.3"
(165.1 x 78.7 x 83.2)
WP26E
Catalog Number
WP8E
WP700E
WP26E
1-Gang Extra-Duty Metallic While-In-Use Covers for Horizontal Mounting
Description
Dimensions
Height x Width x Depth
While-in-Use cover, gray, 1-gang, duplex cover
for horizontal mounting.
4.7" x 5.1" x 3.3"
(119.4 x 129.5 x 83.2)
WP8EH
While-in-Use cover, gray, 1-gang, GFCI cover
for horizontal mounting.
4.7" x 5.1" x 3.3"
(119.4 x 129.5 x 83.2)
WP26EH
Catalog Number
WP8EH
WP26EH
2-Gang Extra-Duty Metallic While-In-Use Covers for Vertical Mounting
Description
Dimensions
Height x Width x Depth
While-in-Use cover, gray, 2-gang, double duplex
cover for vertical mounting.
6.5" x 5.1" x 3.3"
(165.1 x 129.5 x 83.2)
WP82E
While-in-Use cover, gray, 2-gang, GFCI and duplex
cover for vertical mounting.
6.5" x 5.1" x 3.3"
(165.1 x 129.5 x 83.2)
WP268E
While-in-Use cover, gray, 2-gang, double GFCI
cover for vertical mounting.
6.5" x 5.1" x 3.3"
(165.1 x 129.5 x 83.2)
WP262E
Catalog Number
WP82E
WP268E
WP262E
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-27
Wallplates
While-In-Use Weatherproof Covers
For Maximum In-Use Protection
IP66
SUITABILITY
1-Gang Weatherproof Covers for Vertical Mounting
Dimensions
Height x Width x Depth
Description
Thermoplastic, gray, duplex, GFCI, toggle and single
receptacles, diameter 1.34", 1.40", 1.60", 1.72", 2.03"
and 2.15"
Catalog Number
5.8" x 3.5" x 2.8"
(147.3 x 88.9 x 71.1)
RW57300
5.8" x 3.5" x 4.8"
(147.3 x 88.9 x 121.9)
RW57350
RW57300
Thermoplastic, gray, extra deep, duplex, GFCI, toggle and
single receptacles, diameter 1.34", 1.40", 1.60", 1.72", 2.03"
and 2.15"
RW57350
1-Gang Weatherproof Covers for Horizontal Mounting
Dimensions
Height x Width x Depth
Description
Thermoplastic, gray, duplex, GFCI, toggle and single
receptacles, diameter 1.34", 1.40", 1.60", 1.72", 2.03"
and 2.15"
4.0" x 5.2" x 2.8"
(101.6 x 132.1 x 71.1)
Catalog Number
RW57400
RW57400
2-Gang Weatherproof Covers for Vertical Mounting
Dimensions
Height x Width x Depth
Description
Catalog Number
Thermoplastic, gray, duplex, GFCI, toggle and single
receptacles, diameter 1.34", 1.40", 1.60", 1.72", 2.03"
and 2.15"
5.8" x 5.3" x 2.8"
(147.3 x 134.6 x 71.1)
RW57750
Thermoplastic, gray, duplex, GFCI, toggle and single
receptacles, diameter 1.34", 1.40", 1.60", 1.72", 2.03"
and 2.15"
5.8" x 5.3" x 4.8"
(147.3 x 134.6 x 121.9)
RW57900
Thermoplastic, gray, single receptacles, diameter 1.34", 1.40",
1.60", 1.72", 2.03" and 2.15"
5.8" x 5.3" x 4.8"
(147.3 x 134.6 x 121.9)
RW57950
RW57750
RW57900
RW57950
Note: Required by the NEC® for while-in-use outdoor power distribution. Thermoplastic covers provide protection for use in wet
locations with the cover closed, NEMA® 3R rated. Meets NEC 406.8 – receptacles in damp or wet locations. Holes for
padlocks are .40 inch.
NEC® is a registered trademark of the The National Electrical Code.
NEMA® is a registered trademark of The National Electrical Manufacturers Association.
N-28
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Screws and Accessories
Screws, 6-32 Thread, 100 Count
Description
Color/Material
Catalog Number
Decorator Wallplate Screws,
Oval Head Milled Slot,
³⁄₈ in. Long – 6-32 Thread,
100 per Box (Order 1 to
receive a box of 100)
Almond
Black
Brown
Gray
Ivory
Light Almond
White
Stainless Steel
RA38ALPK100
RA38BKPK100
RA38PK100
RA38GYPK100
RA38IPK100
RA38LAPK100
RA38WPK100
RA38SSPK100
Standard Wallplate Screws,
Oval Head Milled Slot,
½ in. Long – 6-32 Thread,
100 per Box (Order 1 to
receive a box of 100)
Almond
Black
Brown
Gray
Ivory
Light Almond
White
RA12ALPK100
RA12BKPK100
RA12PK100
RA12GYPK100
RA12IPK100
RA12LAPK100
RA12WPK100
Standard Wallplate Screws,
Oval Head Milled Slot,
⁵⁄₈ in. Long – 6-32 Thread,
100 per Box (Order 1 to
receive a box of 100)
Ivory
White
Stainless Steel
–
–
RA58SSPK100
Standard Wallplate Screws,
Oval Head Milled Slot,
1.0 in. Long – 6-32 Thread,
100 per Box (Order 1 to
receive a box of 100)
Ivory
White
Stainless Steel
RA88IPK100
RA88WPK100
RA88SSPK100
RA38IPK100
RA12IPK100
RA58SS
RA88IPK100
Single Count Screws and Accessories
Description
Color
Catalog Number
Blank adapter, to fill a toggle opening.
Brown
Ivory
White
RA756
RA756I
RA756W
Blank adapter, to fill a decorator opening.
Ivory
Light Almond
White
NS620I
NS620LA
NS620W
Blank adapter, .406" (10.30) dia. hole,
to fill a decorator opening.
Ivory
Light Almond
White
NS621I
NS621LA
NS621W
Mounting strap, with screws.
Steel
RA40
Brass plated screw, standard slot, .38 in. (9.7) long.
Brass
HBL7341
RA756I
RA40
NS620I
NS621I
HBL7341
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-29
Wallplates
Technical Information
Specifications
Listings
Non-Metallic Plates
Metallic Plates
Certification
UL Standard 514D.
UL Standard 514D.
UL Files #E31999, E92074.
CSA Standard C22.2 No. 42.1.
CSA File 1733174.
Nylon Plate
Thickness
Mounting Screw(s)
Feature
Operating Temperature
Appearance
.06 in. (1.5).
Steel (painted slotted screw head).
Captive mounting screw hole.
-40°C to 85°C.
Smooth.
302/304 Stainless Steel (18% Chromium, 8% Nickel) Plate
Thickness
Mounting Screw(s)
.035 in. (0.9) nominal.
302/304 stainless steel (18% chromium, 8% nickel).
Slotted screw head.
Horizontal brushed finish.
Appearance
430 Stainless Steel (17% Chromium, less than 0.5% Nickel) Plate
Thickness
Mounting Screw(s)
.035 in. (0.9) nominal.
302/304 stainless steel (17% chromium, less than 0.5% nickel).
Slotted screw head.
Horizontal brushed finish.
Appearance
Brass (70% Copper, 30% Zinc) Plate
Thickness
Mounting Screw(s)
Appearance
.04 in. (1.0).
Brass (70% Copper, 30% Zinc). Slotted screw head.
Horizontal brushed finish.
Aluminum Plate
Thickness
Mounting Screw(s)
.05 in. (1.3).
302/304 stainless steel (17% chromium, less than 0.5% nickel).
Slotted screw head.
Horizontal brushed finish.
Appearance
Brass Plated Steel Plate
Thickness
Mounting Screw(s)
Appearance
.03 in. (0.8) nominal.
Brass slotted head.
Polished, coated to inhibit oxidation.
Chrome Plated Steel Plate
Thickness
Mounting Screw(s)
.03 in. (0.8) nominal.
302/304 stainless steel (17% chromium, less than 0.5% nickel).
Slotted screw head.
Polished, coated to inhibit oxidation.
Appearance
Steel Painted Plate
Thickness
Mounting Screw(s)
Appearance
N-30
.03 in. (0.8) nominal.
Steel (painted slotted screw head).
Powder coat paint.
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Wallplate Dimensions
Product Dimensions
Standard Metal
H
Painted Metal
Jumbo Metal
Size
Height
Width
Width
Size
Height
Width
1-Gang
4.50" (114.3)
2.87" (72.9)
2.75" (69.8)
1-Gang
5.25" (133.4)
3.50" (88.9)
2-Gang
4.50" (114.3)
4.60" (116.8)
4.56" (115.8)
2-Gang
5.25" (133.4)
5.31" (134.9)
3-Gang
4.50" (114.3)
6.41" (162.8)
6.38" (162.1)
3-Gang
5.25" (133.4)
7.12" (180.8
4-Gang
4.50" (114.3)
8.22" (208.8)
8.18" (207.8)
5-Gang
4.50" (114.3)
10.03" (254.8)
10.00" (254.0)
6-Gang
4.50" (114.3)
11.81" (300.0)
11.81" (300.0)
7-Gang
4.50" (114.3)
13.68" (347.5)
8-Gang
4.50" (114.3)
15.44" (392.1)
W
Standard Nylon
H
Mid-Size Nylon
Size
Height
Width
Size
Height
Width
1-Gang
4.63" (117.6)
2.88" (73.2)
1-Gang
4.88" (124.0)
3.13" (79.5)
2-Gang
4.63" (117.6)
4.69" (119.1)
2-Gang
4.88" (124.0)
4.94" (125.4)
3-Gang
4.63" (117.6)
6.50" (165.1)
3-Gang
4.88" (124.0)
6.75" (171.5)
4-Gang
4.88" (124.0)
8.56" (217.4)
4-Gang
4.63" (117.6)
8.31" (211.1)
5-Gang
4.63" (117.6)
10.12" (256.1)
6-Gang
4.63" (117.6)
11.93" (303.0)
W
Snap-On Nylon
H
Size
Height
Width
1-Gang
4.68" (118.9)
2.94" (74.7)
2-Gang
4.68" (118.9)
4.75" (120.7)
3-Gang
4.68" (118.9)
6.56" (166.6)
4-Gang
4.68" (118.9)
8.37" (212.6)
5-Gang
4.68" (118.9)
10.18" (258.6)
6-Gang
4.68" (118.9)
11.99" (304.5)
W
Wallplate Openings and Mounting Dimensions
#6-32 Oval Head Screws Typical
Standard Metal - 1.39" (35.3)
Painted Metal - 1.37" (34.8)
Jumbo Metal - 1.76" (44.7)
Standard Nylon - 1.44" (36.6)
Mid-Size Nylon - 1.56" (39.6)
1.81" (46.0)
TYP.
1.81" (46.0)
TYP.
1.81" (46.0)
TYP.
1.81" (46.0)
TYP.
Duplex Recept. Device Mtg.
Power Outlet Device
Mtg. 2.50" (63.5)
Standard Device
Mtg. 2.38" (60.5)
Rectangular Device
Mtg. 3.81" (96.8)
Box Mtg.
3.28" (83.3)
Note: Specifications are subject to change without notice.
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-31
Wallplates
Custom Metal Wallplates
How To Select A Custom Metal Wallplate
Step 1:
Determine number of gangs
required and enter in box
marked "Catalog Number"
next to material.
Determine wallplate material
and enter in box marked
"Catalog Number"
Smooth Metal
Material
Code
Anodized Aluminum
Brass plated steel
Solid brass
Chrome plated steel
Stainless steel 302/304
AL
BP
BR
CH
SS
Number
of Gangs
Enter
Catalog Number
WC*
Item
No.
Catalog Number
1
WCSS4
Code
1
2
3
4
5
6
7
8
1-gang
2-gang
3-gang
4-gang
5-gang
6-gang
7-gang
8-gang
Step 2:
SS
4
Quantity
Step 3:
Enter quantity.
Select the custom metal wallplate configuration.
Refer to the custom wallplate configuration
chart to select a configuration for each gang in
the wallplate. Each configuration has a specific
3-digit code located in the right hand side of the
chart on pages N-33 to N-36. Enter this 3-digit
configuration code in the corresponding box
on the order form grid to match the position
required on the finished custom wallplate.
Code
Position
1
Position
2
Position
3
Position
4
H*
001
149
008
026
Note: *WC and H are preprinted on the distributor order form.
N
umber to use for pricing.
2
The 3-digit numbers listed at the upper
right of the Sample Order Form (001, 149,
etc.) represent the custom metal wallplate
selected on the right. See Configuration
Chart and Hubbell Configuration Selector
Guide on pages N-33 to N-36 for additional
configuration choices.
N-32
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Custom Metal Wallplates
Configuration Chart
001
Switch.
079
Barrel Key Switch with
hash marks.
007
Single Receptacle.
1.40" ID (35.6) Hole.
080
Barrel Key Switch with
On/Off and hash marks.
008
Duplex Receptacle.
091
Single Receptacle.
1.60" ID
(40.5) Hole.
011
1-gang .635" ID (16.1)
Hole Box Mounted with
.50" ID (12.7) Nylon Bushing.
098
Single Receptacle.
2.16" ID
(54.7) Hole.
012
1-gang .635" ID (16.1) Hole Strap
Mtd. incl. Strap with .50" ID (12.7)
Nylon Bushing.
135
Vertical Mounted Louver.
013
Blank Box Mounted.
149
Totally Blank
(no mounting holes).
014
Blank Strap Mounted
incl. Strap.
026
Rectangular Opening.
055
1-gang .375" ID (9.5) Hole
Strap Mounted incl. Strap.
056
1-gang .375" ID (9.5) Hole
Box Mounted.
057
1-gang .50" ID (12.7) Hole
Strap Mounted incl. Strap.
058
1-gang .50" ID
(12.7) Hole Box Mounted.
078
Barrel Key Switch.
456
.375" (9.5) Dia.
Round Box Mounted.
458
.500" (12.7) Dia.
Round Box Mounted.
411
.635" (16.1) Dia.
Round Box Mounted.
435
9-Pin Vertical Box Mounted.
438
15-Pin Vertical Box Mounted.
295
25-Pin Vertical Box Mounted.
314
IBM® Type Opening Box
Mounted.
415
IBM® Type Opening with
One .586" x .762"
(14.9 x 19.3).
Coax/Twinax and Modular
Jack Openings
422
.51" (12.8) Dia.
“D” Box Mounted.
.44" (11.1) Flat Dia.
425
.51" (12.8) Dia.
“D” Box Mounted.
.47" (12) Flat Dia.
428
.58" (14.7) Dia.
“D” Box Mounted.
.55" (14) Flat Dia.
430
.76" (19.2) Dia.
“D” Box Mounted.
.73" (18.6) Flat Dia.
Voice/Data Opening
470
.542" x .750" (13.8 x 19.0)
Vertical Box Mounted.
473
.586" x .762" (14.9 x 19.4)
Vertical Box Mounted.
476
.586" x .815" (14.9 x 20.7)
Vertical Box Mounted.
479
.575" x .783" (14.6 x 19.9)
Vertical Box Mounted.
471
.542" x .750" (13.8 x 19.0)
Vertical Box Mounted.
474
.586" x .762" (14.9 x 19.4)
Vertical Box Mounted.
477
.586" x .815" (14.9 x 20.7)
Vertical Box Mounted.
480
.575" x .783" (14.6 x 19.9)
Vertical Box Mounted.
423
.51" (12.8) Dia.
“D” Box Mounted.
.44" (11.1) Flat Dia.
426
.51" (12.8)
“D” Box Mounted.
.47" (12) Flat Dia.
429
.58" (14.7) Dia.
“D” Box Mounted.
.55" (14) Flat Dia.
431
.76" (19.2) Dia.
“D” Box Mounted.
.73" (18.6) Flat Dia.
Note: For detailed dimensions of the above configurations, see pages N-34 to N-36. Available in smooth metal, standard size only up to and including 8-gang type.
IBM® is a registered trademark of International Business Machines Corporation.
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-33
Wallplates
Custom Metal Wallplates
Configuration Selector Guide
(2) Mtg. Holes
for #6-32
Screw
2.78"
(70.6)
Configuration
001
2.78"
(70.6)
4.53"
(115.1)
4.53"
(115.1)
.406"
(10.3)
(2) Mtg. Holes
for #6-32
Screw
2.78"
(70.6)
4.53"
(115.1)
1.32"
(33.5)
2.78"
(70.6)
4.53"
(115.1)
1.40" DIA
(35.7)
2.38"
(60.5)
Single 15 or 20A Straight
Blade Receptacle.
15A Twist-Lock® Receptacle.
2.78"
(70.6)
4.53"
(115.1)
1.34" DIA
(34.0)
.56"
(14.2)
Mtg. Hole
for #6-32 Screw
2.78"
(70.6)
4.53"
(115.1)
(2) Mtg. Holes
for #6-32
Screw
.50" DIA
(12.7)
w/Bushing
2.78"
(70.6)
4.53"
(115.1)
(2) Mtg. Holes
for #6-32
Screw
4.53"
(115.1)
.50" DIA
(12.7)
w/Bushing
2.78"
(70.6)
(2) Mtg. Holes
for #6-32
Screw
Configuration
011
2.78"
(70.6)
4.53"
(115.1)
(2) Mtg. Holes
for #6-32
Screw
Single, .50" (12.7)
Telephone (Strap Mount).
Single, .635" (16.1)
Telephone (Box Mount).
Configuration
012
2.78"
(70.6)
4.53"
(115.1)
(2) Mtg. Holes
for #6-32
Screw
Single, .50" (12.7)
Telephone (Box Mount).
Single, .635" (16.1)
Telephone (Strap Mount).
Configuration
013
2.78"
(70.6)
(2) Mtg. Holes
for #6-32
Screw
Barrel Key Switch.
Configuration
014
2.78"
(70.6)
2.38"
(60.5)
Configuration
078
.875" DIA
(22.2)
2.38"
(60.3)
4.53"
(115.1)
4.53"
(115.1)
Configuration
058
.50" DIA
(12.7)
3.28"
(83.3)
Blank Plate (Box Mount).
(2) Mtg. Holes
for #6-32
Screw
Configuration
057
.50" DIA
(12.7)
2.38"
(60.5)
3.28"
(83.3)
2.78"
(70.6)
Configuration
056
Single, .375" (9.5)
Telephone (Box Mount).
Duplex Receptacle.
4.53"
(115.1)
4.53"
(115.1)
(2) Mtg. Holes
for #6-32
Screw
.375" DIA
(9.5)
3.28"
(83.3)
.635" DIA
(16.1)
2.38"
(60.5)
Configuration
055
Single, .375" (9.5)
Telephone (Strap Mount).
2.78"
(70.6)
.635" DIA
(16.1)
3.28"
(83.3)
(2) Mtg. Holes
for #6-32
Screw
GFI/Rectangular Opening.
.375" DIA
(9.5)
2.38"
(60.5)
Configuration
008
1.53" 2.66"
(38.9) (67.6)
.41"
(10.4)
3.81"
(96.8)
Toggle Switch Plate.
Configuration
007
Configuration
026
.09" R
(2.3)
2.64"
(67.1)
.925"
(23.5)
2.38"
(60.5)
(2) Mtg. Holes
for #6-32
Screw
2.38"
(60.3)
Blank Plate (Strap Mount).
(2) Mtg. Holes
for #6-32
Screw
Configuration
079
.875" DIA
(22.2)
Barrel Key Switch
with hash marks.
Note: Specifications are subject to change without notice.
N-34
®
Wiring Device-Kellems
www.hubbell-wiring.com
Wallplates
Custom Metal Wallplates
Configuration Selector Guide
(2) Mtg. Holes
for #6-32
Screw
2.78"
(70.6)
4.53"
(115.1)
Configuration
080
Configuration
091
(2) Mtg. Holes
for #6-32
Screw
2.78"
(70.6)
.50" DIA
(12.7)
w/Bushing
2.78"
(70.6)
.86"
(21.8)
.89"
(22.6)
4.53"
(115.1)
.98"
(24.9)
1.595" DIA
(40.5)
2.38"
(60.5)
Single 20 or 30A Twist-Lock®
Receptacle.
4.53"
(115.1)
Single Receptacle,
30 or 50A Straight Blade,
3 Wire Power Outlet.
2.78"
(70.6)
3.28"
(83.3)
2.78"
(70.6)
3.28"
(83.3)
2.38"
(60.5)
.762"
(19.4)
.586"
(14.9)
(2) Mtg. Holes
for #6-32
Screw
(2) Mtg. Holes
for #6-32
Screw
.436" (11.1)
(2) TYP
.505" DIA
(12.8)
1.50"
(38.1)
Configuration
149
2.78"
(70.6)
4.53"
(115.1)
(2) Mtg. Holes
for #6-32
Screw
.06" (1.5) R
(2) Typ
.09" (2.3) R
(4) Typ
4.53"
(115.1)
.45"
(11.4)
2.78"
(70.6)
4.53"
(115.1)
.89"
(22.6)
.98"
(24.9)
3.28"
(83.3)
.13"
(3.3)
(2) Mtg. Holes
for #6-32
Screw
2.78"
(70.6)
(2) Mtg. Holes
for #6-32
Screw
.505" DIA
(12.8)
(2) Typ
RS232 Port Single 25-Pin
(Box Mount).
Configuration
314
2.78"
(70.6)
(2) Mtg. Holes
for #6-32
Screw
Dual .505" (12.8) D-Holes
(Box Mount).
Configuration
428
.550"
(14.0)
4.53"
(115.1)
3.28"
(83.3)
.71"
(18.0)
Configuration
426
1.50"
(38.1)
3.28"
(83.3)
1.02"
(25.9)
.86"
(21.8)
.80"
(20.3)
Configuration
425
.473"
(12.0)
4.53"
(115.1)
1.66" 1.86"
(42.1) (47.2)
3.28"
(83.3)
Configuration
423
Single .505" (12.8) D-Hole
(Box Mount).
Configuration
295
(2) Mtg. Holes
for #6-32
Screw
Single .505" (12.8) D-Hole
(Box Mount).
.505" DIA
(12.8)
Totally Blank Plate.
2.78"
(70.6)
Configuration
422
.473"
(12.0)
3.28"
(83.3)
4.53"
(115.1)
IBM® Type and Modular Jack
(Box Mount).
Dual .505" (12.8) D-Holes
(Box Mount).
Louvered Plate
(Strap Mount).
2.78"
(70.6)
Configuration
415
.80"
(20.3) 3.28"
(83.3)
1.50"
(38.1)
.505" DIA
(12.8)
4.53"
(115.1)
4.53"
(115.1)
1.02" (2) Mtg. Holes
for #6-32
(259)
Screw
Dual .635" (16.1) Holes
(Box Mount).
.436"
(11.1)
Configuration
135
(2) Mtg. Holes
for #6-32
Screw
2.78"
(70.6)
.71"
(18.0)
4.53"
(115.1)
2.156" DIA
(54.7)
2.50"
(63.5)
4.53"
(115.1)
Configuration
098
(2) Mtg. Holes
for #6-32
Screw
2.78"
(70.6)
Configuration
411
1.50"
(38.1)
3.28"
(83.3)
Barrel Key Switch
with On/Off and
hash marks.
(2) Mtg. Holes
for #6-32
Screw
.635" (16.1) DIA
(2) Typ
4.53"
(115.1)
.875" DIA
(22.2)
2.38"
(60.3)
2.78"
(70.6)
.580" DIA
(14.7)
Single .580" (14.7) D-Hole
(Box Mount).
IBM® Type (Box Mount).
Note: Specifications are subject to change without notice.
IBM® is a registered trademark of International Business Machines Corporation.
www.hubbell-wiring.com
®
Wiring Device-Kellems
N-35
Wallplates
Custom Metal Wallplates
Configuration Selector Guide
2.78"
(70.6)
(2) Mtg. Holes
for #6-32
Screw
Configuration
429
2.78"
(70.6)
.580" (14.7) DIA
(2) Typ
4.53"
(115.1)
.550"
(14.0)
2.78"
(70.6)
4.53"
(115.1)
(2) Mtg. Holes
for #6-32
Screw
3.28"
(83.3)
2.78"
(70.6)
.731"
(18.6)
2.78"
(70.6)
(2) Mtg. Holes
for #6-32
Screw
Single .755" (19.2) D-Hole
(Box Mount).
.755" DIA
(19.2)
(2) Typ
2.78"
(70.6)
(2) Mtg. Holes
for #6-32
Screw
Dual .755" (19.2) D-Holes
(Box Mount).
3.28"
(83.3)
.44"
(11.2)
2.78"
(70.6)
4.53"
(115.1)
(2) Mtg. Holes
for #6-32
Screw
.06" R
(1.5)
.09" R
(2.3)
4.53"
(115.1)
Single 9-Pin RS232
(Box Mount).
Configuration
438
.443"
(11.3)
2.78"
(70.6)
(2) Mtg. Holes
for #6-32
Screw
(2) Mtg. Holes
for #6-32
Screw
3.28"
(83.3)
1.50"
(38.1)
2.78"
(70.6)
4.53"
(115.1)
(2) Mtg. Holes
for #6-32
Screw
(2) Mtg. Holes
for #6-32
Screw
.783"
(19.9)
2.78"
(70.6)
4.53"
(115.1)
1.50"
(38.1)
3.28"
(83.3)
3.28"
(83.3)
Dual .50" (12.7) Round
(Box Mount).
2.78"
(70.6)
(2) Mtg. Holes
for #6-32
Screw
Configuration
479
Single Modular Jack
(Box Mount).
Configuration
458
.500" DIA
(12.7)
(2) Typ
4.53"
(115.1)
Dual Modular Jack
(Box Mount).
.575"
(14.6)
3.28"
(83.3)
Dual .375" (9.5) Round
(Box Mount).
2.78"
(70.6)
Configuration
477
.586"
(14.9)-(2) Typ
.815"
(20.7)
Single 15-Pin RS232
(Box Mount).
1.50"
(38.1)
3.28"
(83.3)
Configuration
476
Dual Modular Jack
(Box Mount).
4.53"
(115.1)
.375" DIA
(9.5)
(2) Typ
4.53"
(115.1)
(2) Mtg. Holes
for #6-32
Screw
Dual Modular Jack
(Box Mount).
.815"
(20.7)
2.78"
(70.6)
Configuration
456
Configuration
474
.586"
(14.9)
3.28"
(83.3)
1.156" 1.32"
(29.4) (33.5)
3.28"
(83.3)
1.50"
(38.1)
2.78"
(70.6)
.06" R
(1.5)
.09" R
(2.3)
1.01"
(25.7)
4.53" .84"
(115.1) (21.3)
3.28"
(83.3)
Configuration
435
(2) Mtg. Holes
for #6-32
Screw
.586" (14.9)-(2) Typ
.762"
(19.4)
4.53"
(115.1)
1.50"
(38.1)
3.28"
(83.3)
Single Modular Jack
(Box Mount).
2.78"
(70.6)
.731"
(18.6)
4.53"
(115.1)
Configuration
473
.762"
(19.4)
3.28"
(83.3)
Configuration
431
(2) Mtg. Holes
for #6-32
Screw
Dual Modular Jack
(Box Mount).
.586"
(14.9)
4.53"
(115.1)
.755" DIA
(19.2)
3.28"
(83.3)
1.50"
(38.1)
Dual .580" (14.7) D-Holes
(Box Mount).
Configuration
430
Configuration
471
.542"
(13.8)-(2) Typ
.750"
(19.0)
4.53"
(115.1)
1.50"
(38.1)
3.28"
(83.3)
(2) Mtg. Holes
for #6-32
Screw
(2) Mtg. Holes
for #6-32
Screw
Configuration
480
.575"
(14.6)-(2) Typ
.783"
(19.9)
1.50"
(38.1)
Dual Modular Jack
(Box Mount).
Configuration
470
4.53"
(115.1)
3.28"
(83.3)
.750"
(19.0)
.542"
(13.8)
Single Modular Jack
(Box Mount).
Note: Specifications are subject to change without notice.
N-36
®
Wiring Device-Kellems
www.hubbell-wiring.com
Section O
Floor Boxes
Index
Product
Page
Hubbell Floor Box Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-2
Hubbell SystemOne
Floor Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-3
Covers and Sub-Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-4
Configuration Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-5
Metal and Non-Metallic Concrete Floor Boxes . . . . . . . . . . . . . . . . . . . . . O-6
Sub-Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-7
Flush Concrete Floor Boxes and Covers
Round Non-Metallic, Single or Multi-Service . . . . . . . . . . . . . . . . . . . . . . . O-8
Round Metal, Single Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-9
Rectangular Non-Metallic, 1-, 2-, and 3-Gang . . . . . . . . . . . . . . . . . . . . . O-10
Rectangular Cast Iron, 1-, 2-, and 3-Gang . . . . . . . . . . . . . . . . . . . . . . . . O-12
Rectangular Stamped Steel, 1-, 2-, and 3-Gang . . . . . . . . . . . . . . . . . . . O-13
Recessed Concrete Floor Boxes and Covers
2-Gang Stamped Steel and Cast Iron. . . . . . . . . . . . . . . . . . . . . . . . . . . . O-14
4- and 8-Gang Stamped Steel and Cast Iron . . . . . . . . . . . . . . . . . . . . . . O-15
6-Gang Stamped Steel and Cast Iron. . . . . . . . . . . . . . . . . . . . . . . . . . . . O-16
Large Capacity Concrete Floor Boxes with Round Cover . . . . . . . . . . . . O-17
7- and 11-Gang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-18
Ballroom Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-19
Flush Floor Boxes for Wooden Floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-20
Above-Floor Service Fittings (Single Service) . . . . . . . . . . . . . . . . . . . . . . . O-21
Residential Delivery Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-22
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-24
Hubbell Floor Box Cover to Receptacle Compatibility Chart . . . . . . . . . . . . O-26
CONNEXION Modular Wiring Zone System
System Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-29
Unloaded Raised Access Floor Boxes and Face Plates . . . . . . . . . . . . . O-30
Custom Pre-Wired Access Floor Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . O-31
Convention Center Utility Box
Metallic Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-32
Dimensional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-33
Furniture and Work Surface Connectivity Boxes and Table Top Boxes
Furniture and Work Surface Connectivity Boxes . . . . . . . . . . . . . . . . . . . O-35
Pre-Wired Work Surface Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-36
Pre-Wired Work Surface Elite Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-37
Recessed Wall Boxes
AV In-Wall and Ceiling Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-38
Large Capacity Wall Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-39
Multi-Connect – Dimensional Information and Face Plates . . . . . . . . . . . O-40
www.hubbell-wiring.com
Hubbell SystemOne
Floor Boxes
Recessed Multi-Service
Concrete Floor Boxes
CONNEXION Zone
Distribution System
Furniture and Work
Surface Boxes
O-1
Floor Boxes
Hubbell Floor Boxes
Applications
Featuring the unique capabilities of Hubbell’s SystemOne universal cover and sub-plate design, Hubbell has expanded
its floor box offering to provide industry leading flexibility while accommodating an extensive range of applications.
Hubbell SystemOne is constructed to give customers the ability to create personal solutions for their most demanding,
power, data and audio/video requirements.
Hubbell SystemOne Floor Box Applications…
Multi-Service Applications
This Hubbell SystemOne sub-plate
incorporates a standard Style Line®
decorator opening, which can be used
for an active multimedia device. In
addition, a 20A outlet is supplied for
power and two keystone openings
for voice/data services.
Multimedia Applications
Other Hubbell SystemOne sub-plates are
designed to meet the growing needs of
the audio/video market. Some sub-plates
provide power outlets with Hubbell’s AV
products including 15-pin SVGA, RCA,
S-Video, 3.5mm stereo, HDMI and XLR
microphone jacks. Other sub-plates can
accommodate Extron® Electronics MAAP
and AAP series AV modules, as well as
FSR IPS plates.
4X4 Applications
Provides maximum power capacity
for flush, multi-service applications.
This sub-plate features a pre-wired
four outlet 20A, 125V receptacle and
four openings for flush mount Hubbell
modular jacks and audio/video Snap
Fit connectors. Receptacle wiring
permits dual- circuit, as well as
isolated ground applications.
Flush Applications
Hubbell offers a wide variety of traditional
solutions including single and multi-gang
cast iron, stamped steel and non-metallic
floor boxes in both round and rectangular
designs. These boxes can be finished
with either brass or aluminum covers
and flanges to match any office décor.
All Hubbell floor box assemblies exceed
UL scrub water exclusion requirements.
Wooden Floor Applications
Hubbell offers round, single service and
rectangular, multi-service floor boxes
for wooden floor applications. The
rectangular boxes are available in one,
two and three-gang options and feature
removable barriers for maximum
capacity while maintaining separation
of power and low voltage. A variety
of covers and flanges are available in
brushed aluminum or brass to meet
aesthetic requirements.
Traditional Floor Boxes…
Recessed Applications
For applications where recessed
connections are desired, Hubbell has
a complete line of recessed stamped
steel and cast iron floor boxes, from
two to eleven gangs. A variety of
modular face plates are available to
meet a wide array of power, data,
voice and audio/video requirements.
Carpet and tile cover assemblies
are offered in a variety of finishes
and styles.
Extron® is a registered trademark of Extron Electronics.
O-2
www.hubbell-wiring.com
Floor Boxes
The Hubbell SystemOne Floor Box Family
Cast Iron
Features
• Corrosion resistant for on-grade
applications
• Oversized 1½" NPT threaded conduit
access holes for low voltage
S1CFB
Complies with UL514A & C
• 1" NPT threaded conduit access
holes for power
• Easily installed, aesthetic and configurable floor box
solution, for open floor plans that require both power
and data services
• The Hubbell SystemOne Universal Cover mounts
directly to the floor box riser, eliminating the need
for an additional adapter collar
• The Hubbell SystemOne Universal Cover features
ScrubShield® technology that exceeds UL514 scrub
water exclusion requirements
• Convenient cubic inch capacity (cm3) markings on
interior of box
Steel
• Stamped steel construction
S1SFB
• Leveling feet provide before pour adjustability
• Economical and light weight for
above-grade applications
• Non-metallic riser allows a simple saw cut for
adjustment after pour
• Concentric knockouts permit
various conduit sizes for both
power and data services
• Supplied with concrete cover and closure plugs
(where applicable)
• Designed to accommodate multi-service
applications with the wide offering of Hubbell
SystemOne sub-plates
• Hubbell SystemOne Metal Floor Boxes are
approved for use in the City of Chicago
Steel AV
• Accommodates high-capacity
multimedia applications in a 3½"
minimum depth of pour
• Oversized 1½" NPT threaded
data hub
S1SFBAV
• ¾", 1" concentric knockouts for
power services
Non-Metallic
Features
• Non-corrosive plastic construction
• Oversized 1½" data conduit hub
for increased cable capacity and
bend radius
S1PFB
• Parallel conduit hubs reduce labor
and material cost, facilitating easier
wire pull
www.hubbell-wiring.com
• Economical, easy to install, in-floor delivery system
for open plan spaces
• The Hubbell SystemOne Universal Cover mounts
directly to the floor box riser, eliminating the need for
an additional adapter collar
• Concrete cover, conduit reducers and conduit hub
plugs included
O-3
Floor Boxes
Hubbell SystemOne Universal Covers
Complies with UL514A & C
Universal Flange and Cover Assembly
Carpet
• Hinged doors open 180 degrees
flush to the carpet flange or tile
Tile
• Locking studs allow each door to
be secured independently
• The universal carpet or tile flange
can be used for Hubbell SystemOne
Floor Boxes and Fire-Rated
Poke-Throughs
• Finishes and colors available:
Aluminum
Finish
Brass
Finish
Black
Gray
Ivory
Hubbell SystemOne Sub-Plates
Hubbell’s modular sub-plate design allows users to economically
upgrade Hubbell SystemOne FRPT and Floor Boxes to
accommodate future moves, adds and changes.
See page O-7 for additional Information.
4x4 Sub-Plate
Dual Style Line®
Decorator Sub-Plate
Datacom and Power
Sub-Plate
Twist-Lock®
Sub-Plate
Extron® AAP/MAAP
and Power Sub-Plate
Furniture Feed
Cover, Carpet
Power Devices and Connectivity
Hubbell-PRO
Receptacles
Hubbell
iSTATION
Hubbell
X-END
Features
• Durable cast aluminum construction available in
black, gray, brass, aluminum and ivory powder
coat finishes
• Features ScrubShield® technology that exceeds
UL514 scrub water exclusion requirements
• Provides consistent look and maximum functionality
throughout the installed life
• Meets ADA standards for accessible design,
section 4.3.8
Features
• Durable cast aluminum construction, powder
coat finish
• Hubbell 4X4: four 20A, 125V receptacles, four
keystone openings for voice/data jacks and flush
multimedia connectors
• Hubbell X-END and Hubbell iSTATION modular
connectivity
• Accommodates Extron® Electronics Architectural
Series audio/video system integration products
• Accommodates GFCI, surge and standard Style
Line® Decorator receptacles
• Twist-Lock® receptacle with two flush keystone
openings
• Large capacity and multi-service furniture feed
applications
• Open system sub-plates permit maximum
data flexibility
Features
• Choose from Hubbell’s industry leading selection
of wiring devices for power services
• Hubbell iSTATION connectivity modules integrate
with SystemOne to provide comprehensive multimedia solutions
• Hubbell X-END application cables and tails allow
for more connectivity in a smaller footprint
Extron® is a registered trademark of Extron Electronics.
O-4
www.hubbell-wiring.com
Floor Boxes
Hubbell SystemOne Configuration Chart
NonMetallic
Sub-Plates
S1SP
Style Line® Decorator/GFCI
S1SPDU
Duplex/Duplex
Line®
Complies with UL514A & C
Floor Boxes*
4" Core Hole
Fire-Rated Poke-Throughs
Metal
S1PFB
S1CFB
S1SFB
S1SFBAV
S1PTFIT
S1PT4X4FIT S1PTAVFIT
3
3.5
3.5
3.5
3
3.5
3.5
3.5
3
3.5
3.5
3.5
4
4
4
4
4
4
4
4
5
5
5
5
3.5
3.5
3.5
3.5
S1SPDUSL
Duplex/Style
Decorator
S1SP4X4
S1SP4X4PA
S1SP4X4SYS
S1SPTL
Hubbell 4 X 4
Panduit Mini-Com® 4 X 4
SYSTIMAX® 4 X 4
Twist-Lock® Receptacle
+ Data
S1SP3IM
Hubbell DataCom
+ Power
S1SP4IM
Hubbell DataCom
S1SPDU2IM
Hubbell DataCom
+ Duplex
5
5
5
5
S1SPSL2IM
Hubbell DataCom
+ Style Line® Decorator
5
5
5
5
S1SPFFxx
(Carpet)
S1SPFFTxx
(Tile)
S1SPEXT1
Furniture Feed Cover/Flange
(Replace “x” with BRS (brass
finish), AL (aluminum finish),
BL (black) or GY (gray).
3
3.5
3.5
3.5
Extron® or FSR
+ Power
4
4
4
4
S1SPEXT2
Extron® or FSR
+ Power
4
4
4
4
S1SPEXT3
Extron®
4.5
4.5
4.5
4.5
S1SPEXT4
Extron®
+ Power
4
4
4
4
S1SPORT
Ortronics Series II®
+ Power
5
5
5
5
S1SPTRAC
Ortronics TracJack®
+ Power
5
5
5
5
S1SPMAX
Siemon MAX® + Power
5
5
5
5
S1SPAMM20
Active Multimedia + Flush
Keystone + Power
5
5
5
5
S1CFCxx
SystemOne
Carpet Cover
S1TFCxx
SystemOne
Tile Cover
SystemOne Floor Boxes
and FRPTs use SystemOne
Universal Covers (Replace
“x” with BRS (brass finish),
AL (aluminum finish),
BL (black), GY (gray) or
I (ivory).
or FSR
Single-Service
or FSR
www.hubbell-wiring.com
Signifies minimum depth of concrete pour
in inches for Hubbell SystemOne Floor
Boxes.
Recommended
Floor Fitting
Alternative Floor
Fitting
Not Compatible
Note: *Fire-Rated Poke-Throughs available with integral power junction box. Add “J” suffix to catalog
numbers listed above (Example: S1PTFITJ). See section P for additional Information.
Extron® is a registered trademark of Extron Electronics. MAX® is a registered trademark of The Siemon
Company. Mini-Com® and Panduit® are registered trademarks of Panduit Corp. SYSTIMAX® is a registered
trademark of CommScope, Inc. TracJack ®, Series II® & Ortronics® are registered trademarks of
Ortronics/Legrand.
O-5
Floor Boxes
Hubbell SystemOne Metal and Non-Metallic
Concrete Floor Boxes
Complies with UL514A & C
Dimensions Inches (mm)
Style
D
D
Cast Iron
Steel
Steel AV
Non-Metallic
S1CFB*
S1SFB*
S1SFBAV*
S1PFB
A
A
B
C
B
Metal
C
Non-Metallic
Min. Depth of Pour
3.50" (88.9)
3.50" (88.9)
3.50" (88.9)
3.00" (76.2)
Adjustability
Fully
Fully
Fully
Fully
Cubic Inch (cm3) Capacity
156.0 cu. in.
(2556.4 cm3)
175.7 cu. in.
(2879.2 cm3)
177.5 cu. in.
(2909.7 cm3)
100 cu. in.
(1638.7 cm3)
Dimensions – A
3.00" (76.2)
3.00" (76.2)
3.00" (76.2)
6.00" (152.4)
Dimensions – B
7.26" (184.4)
7.50" (190.5)
7.50" (190.5)
5.58" (141.7)
Dimensions – C
7.45" (189.2)
7.38" (187.4)
7.38" (187.4)
7.08" (179.8)
Dimensions – D (Inside Diameter)
5.00" (127.0)
5.00" (127.0)
5.00" (127.0)
5.00" (127.0)
Power Entries
1" NPT
Access Holes
¾", 1"
Concentric KO
¾", 1"
Concentric KO
1" Conduit Hub
Data Entries
1½" NPT
Access Holes
¾", 1", 1¼"
Concentric KO
1½" Threaded Hub
(included)
1½" Conduit Hub
Concrete Cover Included
Closure Plugs Included
–
Reducers
–
–
–
(see below)
Accepts Hubbell SystemOne
Universal Cover
Cover Mounting Clips Included
Non-Metallic Low Voltage Divider Included (S1DIV1)
Note: UL File Number E92074.
CSA File Number LR18416.
*S1CFB, S1SFB, S1SFBAV are approved for use in the City of Chicago.
S1PFB reducers included: Qty (2) combo plug/reducers 1" to ¾"
Qty (2) reducers 1½" to 1"
Qty (2) reducers 1½" to ¾"
Qty (2) plugs 1½"
Hubbell SystemOne Universal Covers
Floor Box Accessories
• Cast aluminum construction
Description
• Durable powder coat finish
Color
Carpet
Tile
Aluminum Finish
Brass Finish
Black
Gray
Ivory
S1CFCAL
S1CFCBRS
S1CFCBL
S1CFCGY
S1CFCI
S1TFCAL
S1TFCBRS
S1TFCBL
S1TFCGY
S1TFCI
Aluminum
Finish
Brass
Finish
Black
Catalog Number
Abandonment Plates
Used to cover abandoned SystemOne Fire-Rated
Poke-Throughs or Floor Boxes.
Gray
Ivory
S1AP4BL
S1AP4GY
Black
Gray
Replacement Side by Side Divider
Used to isolate compartments in S1SP, S1SPFFx,
S1SPFFTx, S1SPDU, S1SPDUSL, S1SPDU2IM
and S1SPSL2IM sub-plates. Included with all
SystemOne Floor Boxes.
S1DIV1
1½" Threaded Hub
For use with S1SFBAV ONLY. Permits feedthrough applications. S1SFBAV floor box includes
one (1) threaded hub.
Replacement Universal Cover Mounting Clips
Used to mount SystemOne Universal Cover to
SystemOne metal and non-metallic floor boxes
(S1CFB, S1SFB, S1SFBAV, S1PFB). Includes clips
and ground leads for (5) floor boxes. All SystemOne
Floor Boxes include mounting clips.
S1AVHUB15
S1FBCLIP5PK
Dimensions in Inches (mm)
O-6
www.hubbell-wiring.com
Floor Boxes
Hubbell SystemOne Sub-Plates
Description
Catalog Number
Style Line® Decorator/GFCI
(2) Style Line® decorator openings
for power and/or datacom
applications.
3 Non-Metallic
3.5
Description
S1SP
S1SP4X4
3 Non-Metallic
S1SP4X415
S1SP4X430
Single Receptacle + Data
Opening for 20 or 30A Twist-Lock®
receptacle (1.56" OD) and (2)
Keystone openings for Hubbell
jacks or flush AV connectors.
S1SPTL
4
S1SPDU
3.5
Metal
Carpet Furniture Feed
Cover/Flange*
(1) ¾" and (1) 1½" NPT access
holes for power and/or datacom
applications. Universal Cover not
required. Includes carpet flange.
3 Non-Metallic
4
Provided with 15 ft. wire leads
Provided with 30 ft. wire leads
Catalog Number
Duplex/Duplex
(2) Duplex openings for power
and/or datacom applications.
Metal
Hubbell 4 X 4
(4) 20A, 125V receptacles.
(4) Keystone openings for Hubbell
jacks or flush AV connectors.
Power can be wired as single or
two circuit with isolated ground
capability.
Complies with UL514A & C
3.5
Metal
Aluminum Fin.
Brass Finish
Black
Gray
Hubbell DataCom + Power
(1) 20A, 125V receptacle and
3-unit recessed Hubbell iSTATION
opening for data, voice, and AV
applications.
S1SPSL2IM
5
S1SPFFAL
S1SPFFBRS
S1SPFFBL
S1SPFFGY
S1SP3IM
or FSR + Power
(1) 20A, 125V receptacle.
Recessed opening for (3) single
Extron® MAAP series adapter
plates or FSR IPS plates.
Hubbell DataCom
1 unit flush Hubbell iSTATION
opening and 3-unit recessed
Hubbell iSTATION opening for
data, voice, and AV applications.
S1SP4IM
4
or FSR + Power
(1) 20A, 125V receptacle.
Recessed opening for (1) single
Extron® MAAP and (2) single
AAP series adapter plates or
FSR IPS plates.
S1SPEXT2
4
AAP + Power
(1) 20A, 125V receptacle. (2) flush
Keystone and recessed opening
for (2) single Extron® AAP Series
adapter plates.
Metal
Hubbell DataCom + Duplex
(1) Duplex opening, (2) flush Keystone
openings and 1.5 unit recessed
Hubbell iSTATION opening for data,
voice and AV applications.
S1SPFFTAL
S1SPFFTBRS
S1SPFFTBL
S1SPFFTGY
S1SPDU2IM
Active Multimedia + Power
Single 20A, 125V receptacle;
(2) flush Keystone openings;
(1) rectangular Style Line® decorator
opening to accommodate active
multimedia modules or low voltage
outlet frames.
S1SPAMM20
Extron® or FSR
Single-Service
Recessed opening for (2) single
Extron® MAAP and (2) single
AAP series adapter plates or
FSR IPS plates.
S1SPEXT3
S1SPTRAC
5
SYSTIMAX® 4 X 4
(4) 20A, 125V receptacles.
(4) Openings for SYSTIMAX®
Connectivity.
S1SP4X4PA
4
3.5
Aluminum Fin.
Brass Finish
Black
Gray
Ortronics TracJack® + Power
(1) 20A, 125V receptacle.
Recessed bezel for (6) Ortronics
TracJack® modules.
5
Panduit Mini Com® 4 X 4
(4) 20A, 125V receptacles.
(4) Openings for Panduit
Mini-Com Connectivity.
3 Non-Metallic
S1SPORT
S1SPEXT4
4
S1SPDUSL
Metal
4.5
Ortronics Series II® + Power
(1) 20A, 125V receptacle.
Recessed opening for (3) 1 unit
Ortronics Series II® modules.
Extron®
3.5
5
Extron®
S1SPEXT1
3 Non-Metallic
5
3.5
Extron®
Catalog Number
Tile Furniture Feed
Cover/Flange*
(1) ¾" and (1) 1½" NPT access
holes for power and/or datacom
applications. Universal Cover not
required. Includes tile flange.
5
Hubbell DataCom +
Style Line® Decorator
(1) Style Line® decorator opening,
(2) flush Keystone openings and
1.5 unit recessed Hubbell
iSTATION opening for data,
voice and AV applications.
Description
Duplex/Style Line® Decorator
(1) Duplex and (1) Style Line®
decorator opening for power and/or
datacom applications.
Siemon MAX® + Power
(1) 20A, 125V receptacle.
Recessed bezel for
(6) Siemon MAX® modules.
S1SP4X4SYS
4
5
S1SPMAX
Signifies minimum depth of concrete pour in inches for Metal Floor Boxes (S1CFB, S1SFB and S1SFBAV) and Non-Metallic Floor Box (S1PFB).
Note: *Furnished with two screw-in flexible metal conduit connectors.
See section W for datacom accessories.
Sub-Plate Accessories
Description
Description
Catalog Number
Replacement Threaded Conduit Plugs
Used with S1SPFFx and S1SPFFTx ONLY.
Sub-plate is supplied with plugs.
6-Port Replacement Data Frames
Used with open systems sub-plates. Sub-plate
is supplied with data frame. Siemon MAX® for
use with S1SPMAX sub-plate.
Ortronics TracJack® for use with
S1SPTRAC sub-plate.
S1DFMAX
Black Style Line® decorator blank frame.
2100BK
Color
1½" Plug
¾" Plug
Aluminum Finish
Brass Finish
Black
Gray
S1FP15AL
S1FP15BRS
S1FP15BL
S1FP15GY
S1FP34AL
S1FP34BRS
S1FP34BL
S1FP34GY
S1DFTRAC
Extron® is a registered trademark of Extron Electronics. MAX® is a registered trademark of The Siemon Company. Mini-Com® and Panduit® are registered trademarks of
Panduit Corp. SYSTIMAX® is a registered trademark of CommScope, Inc. TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
www.hubbell-wiring.com
O-7
Floor Boxes
Flush Round Single or Multi-Service
Non-Metallic Concrete Floor Box
Complies with UL514A & C
Dimensions Inches (mm)
Description
D
Catalog Number
Adapter
Required for all applications.
A
PFBA1A
B
C
PFB1
3.00" (76.2)
100 cubic inches prior to cutting level to floor
(19.5 cubic inches per inch of depth).
6.00" (152.4)
7.08" (179.8)
6.69" (169.9)
5.38" (136.5)
(2) 1.0" and (2) ¾" conduit hubs
Min. Depth of Pour
Capacity
Dimensions – A
Dimensions – B
Dimensions – C
Dimensions – D
Hubs
Concrete Cover Included
Low Voltage Divider
Required for use with catalog number
PFB1 when used in multi-service
applications. Accepts Hubbell standard
duplex receptacles or 15A Twist-Lock®
duplex receptacles (HBL4700 series).
PFBT1A
“Y” Adapter
¾ in. “Y” adapter to feed parallel
runs of ¾ in. conduit.
PFBYA1
(2) 1" plugs close off 1" hubs or reduce 1" to ¾"
(2) ¾" plugs close off ¾" hubs or reduce ¾" to ½"
Closure/Reducer Plugs
Note: UL File Number E92074. CSA File Number LR18416.
Flush Round Covers and Flanges
SF39253A
PFBCBRA
PFBCBLA
PFBCGYA
PFBCIA
Brass
Brown
Non-Metallic
Black
Non-Metallic
Gray
Non-Metallic
Ivory
Non-Metallic
S3925
SA3925
S3725
SA3725
S2525
SA2525
S2725
SA2725
S2925
SA2925
S3525
—
S3325
—
Duplex
Flap
Duplex
Screw
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
2¹⁄₈" Single
Receptacle
(Terrazzo Floor)
Multi-Service Cover and
Flange Assemblies
Includes floor box cover with
duplex flaps, (2) ½ in. dia. low
voltage feed through holes
and matching carpet flange.
6.25 in. Diameter
Single Service Covers
Brass
Aluminum
3.88 in. Dia.
Metal Carpet Flange
Adapter Ring
Use with single service covers for carpet applications.
6.25 in. Diameter
Furniture Feed Plate
Use with single service covers
for tile applications.
Unpainted plate with
1 in. threaded opening.
S3082
SA3082
S5016
SA5016
PFBP1
Brass
Brushed Aluminum
Brass
Aluminum
Steel
SF3925
SF2525
SF2725
SF2925
Duplex
Flap
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
One Piece Brass Cover and Carpet Flange
6.25 in. Dia.
Note: Adapter ring S5016 is required for
mounting SF series covers onto PFBA1A.
O-8
www.hubbell-wiring.com
Floor Boxes
Flush Round Single Service
Metal Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Style
Stamped Steel
Cast Iron
D
A
B
C
Collar Material:
Brass
Aluminum
Min. Depth of Pour
Adjustability
Before Pour External Height
Adjustment
After Pour Internal
Height Adjustment
Cubic Inch (cm3) Capacity
Dimensions – A
Dimensions – B
Dimensions – C
Dimensions – D
Threaded Access Holes
Knockouts – Sides
Knockouts – Ends
Knockouts – Bottom
B2536
B253641
B2503
BA2536
–
–
3.75" (95.3)
3.75" (95.3)
Fully
Fully
1.25" (31.8)
–
B2537
B2506 B2506415
BA2537
–
–
4.75" (120.7)
3.00" (76.2)
Fully
Fully
–
–
–
4.00" (101.6)
Fully
1.25" (31.8)
3.00" (76.2)
Fully
1.25" (31.8)
.38" (9.5)
.63" (15.9)
.63" (15.9)
.38" (9.5)
.38" (9.5)
.38" (9.5)
33.0 cu. in.
(540.7 cm3)
3.05" (77.5)
4.84" (122.9)
4.84" (122.9)
4.19" (106.4)
(4) ¾"
(4) 1"
–
–
–
–
–
–
36.0 cu. in.
(590.0 cm3)
3.75" (95.3)
5.00" (127.0)
4.63" (117.6)
4.19" (106.4)
(4) ¾"
–
–
–
50.8 cu. in.
(832.5 cm3)
4.75" (120.7)
5.00" (127.0)
4.66" (118.4)
4.19" (106.4)
(4) 1¼" (4) 1½"
–
–
–
–
–
–
30.0 cu. in.
(491.6 cm3)
2.87" (72.9)
4.84" (122.9)
4.84" (122.9)
4.19" (106.4)
(4) ¾"
–
–
–
54.0 cu. in.
(884.9 cm3)
3.88" (98.6)
6.00" (152.4)
4.81" (122.2)
4.19" (106.4)
–
(1) 1" & (1) ¾"
(1) 1¼" & (1) ½"
(3) ½" & (2) ¾"
37.3 cu. in.
(611.2 cm3)
2.91" (73.9)
6.00" (152.4)
4.81" (122.2)
4.19" (106.4)
–
(2) ½" & (1) ¾"
(1) ½" & (1) ¾"
(3) ½" & (2) ¾"
Concrete Cover Included
Closure Plugs Included
B2527
BA2527
B2529
BA2529
–
–
Note: UL File Number E31999.
CSA File Number LR18416.
Suitable for single service applications only.
Single Service Covers
Brass
Aluminum
3.88 in. Dia.
S3925
SA3925
S3725
SA3725
S2525
SA2525
S2725
SA2725
S2925
SA2925
S3525
—
S3325
—
Duplex
Flap
Duplex
Screw
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
2¹⁄₈" Single
Receptacle
(Terrazzo Floor)
S3182
SA3182
S3079
6.25 in. Dia.
S3082
SA3082
Brass
Brushed
Aluminum
Clear
Polycarbonate
Brass
Brushed
Aluminum
Carpet Flanges
5.25 in. Dia.
One Piece Brass Cover and Carpet Flange
6.25 in. Dia.
SF3925
SF2525
SF2725
SF2925
Duplex
Flap
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
www.hubbell-wiring.com
O-9
Floor Boxes
Flush Rectangular Non-Metallic Concrete
Floor Boxes with Non-Metallic Covers
Complies with UL514A & C
Dimensions Inches (mm)
Style
1-Gang
2-Gang
3-Gang
PFBRG1*
PFBRG2
PFBRG3
A
E
B
C
D
Min. Depth of Pour
3.00" (76.2)
3.00" (76.2)
3.00" (76.2)
Adjustability
Fully
Fully
Fully
Cubic Inch (cm3) Capacity
Per Gang
14.3 cu. in. (234.3 cm3)
per 1" depth
14.3 cu. in. (234.3 cm3)
per 1" depth
14.3 cu. in. (234.3 cm3)
per 1" depth
Dimensions – A
6.00" (152.4)
6.00" (152.4)
6.00" (152.4)
Dimensions – B
3.60" (91.4)
6.82" (173.2)
10.04" (255.0)
Dimensions – C
5.42" (137.7)
5.42" (137.7)
5.42" (137.7)
Dimensions – D
6.90" (175.3)
6.90" (175.3)
6.90" (175.3)
Dimensions – E
5.44" (138.2)
8.66" (220.0)
11.87" (301.5)
Hubs
(4) 1¼"
(6) 1¼"
(8) 1¼"
Reducers
(4) 1" to ¾" and (4) 1¼" to 1"
(6) 1" to ¾" and (6) 1¼" to 1"
(8) 1" to ¾" and (8) 1¼" to 1"
Concrete Cover Included
Closure Plugs Included
Removable LV Barrier
–
Note: UL File Number E92074.
*Suitable for single service applications only.
Flush Rectangular Non-Metallic Covers and Flanges
Required Components for Carpet Applications
Cover with Duplex and Style Line® decorator inserts included
Carpet Flanges
Number of Gangs
Dimensions
1-Gang
6.00" x 4.88"
2-Gang
6.00" x 8.13"
3-Gang
6.00" x 11.35"
One Required per Gang
4.15" x 2.97"
Black
Brown
Gray
Ivory
PFBRFBL1
PFBRFBR1
PFBRFGY1
PFBRFI1
PFBRFBL2
PFBRFBR2
PFBRFGY2
PFBRFI2
PFBRFBL3
PFBRFBR3
PFBRFGY3
PFBRFI3
PFBR826BLA
PFBR826BRA
PFBR826GYA
PFBR826IA
Cover
Duplex
Insert
Style Line®
Decorator Insert
Required Components for Tile Applications
Mounting Collar
Cover Frame
Cover with Duplex and Style Line® decorator inserts included
One Required per Gang
One Required per Gang
Dim. 4.47" x 3.25"
One Required per Gang
4.15" x 2.97"
PFBRMC
PFBRFRA
PFBR826GYA
Cover
O-10
Duplex
Insert
Style Line®
Decorator Insert
www.hubbell-wiring.com
Floor Boxes
Flush Rectangular Non-Metallic Concrete
Floor Boxes with Metal Covers
Complies with UL514A & C
Dimensions Inches (mm)
Style
1-Gang
2-Gang
3-Gang
PFBRG1*
PFBRG2
PFBRG3
A
E
B
C
D
Min. Depth of Pour
3.00" (76.2)
3.00" (76.2)
3.00" (76.2)
Adjustability
Fully
Fully
Fully
Cubic Inch (cm3) Capacity
Per Gang
14.3 cu. in. (234.3 cm3)
per 1" depth
14.3 cu. in. (234.3 cm3)
per 1" depth
14.3 cu. in. (234.3 cm3)
per 1" depth
Dimensions – A
6.00" (152.4)
6.00" (152.4)
6.00" (152.4)
Dimensions – B
3.60" (91.4)
6.82" (173.2)
10.04" (255.0)
Dimensions – C
5.42" (137.7)
5.42" (137.7)
5.42" (137.7)
Dimensions – D
6.90" (175.3)
6.90" (175.3)
6.90" (175.3)
Dimensions – E
5.44" (138.2)
8.66" (220.0)
11.87" (301.5)
Hubs
(4) 1¼"
(6) 1¼"
(8) 1¼"
Reducers
(4) 1" to ¾" and (4) 1¼" to 1"
(6) 1" to ¾" and (6) 1¼" to 1"
(8) 1" to ¾" and (8) 1¼" to 1"
Concrete Cover Included
Closure Plugs Included
Removable LV Barrier
–
Note: UL File Number E92074.
*Suitable for single service applications only.
Flush Rectangular Metal Covers and Flanges
Flush Rectangular Metal Covers and Flanges
Required Components for Carpet and Tile Applications
Required Components for Carpet and Tile Applications
Adapter Collar
(One required per gang)
Adapter Collar
(One required per gang)
Gray
Adapter Frame with Grounding Lug (One
required per gang) Dim. 4.36" x 3.20"
PFBRAC
Brass
Aluminum
S5017G
SA5017G
Gray
Carpet Flanges (Not Required for Tile Applications)
PFBRAC
Rectangular Flanges (Required)
Tapered Flange
Number of Gangs
Dimensions
1-Gang
6.00" x 4.85"
2-Gang
6.00" x 8.13"
3-Gang
6.00" x 11.34"
1-Gang
6.00" x 4.85"
2-Gang
6.00" x 8.13"
3-Gang
6.00" x 11.34"
Brass
Aluminum
SB3083
SA3083
SB3084
SA3084
SB3085
SA3085
SB3083W
SA3083W
SB3084W
SA3084W
SB3085W
SA3085W
Covers – One Required per Gang
Brass
Aluminum
Dimensions
4.15" x 2.99"
S3825
SA3825
S3625
SA3625
S3826
SA3826
S2425
SA2425
S2625
SA2625
S2825
—
S3813
SA3813
Duplex
Flap
Duplex
Screw
Style Line®
Decorator Opening
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
Blank
www.hubbell-wiring.com
O-11
Floor Boxes
Flush Rectangular Cast Iron
Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Cast Iron
Style
2-Gang Deep
1-Gang Deep
D
3-Gang Deep
1-Gang Shallow
2-Gang
Shallow
3-Gang
Shallow
B4314
–
E
A
B
C
Collar Material:
Brass
Aluminum
B2436* B243641* B4233 B423341
BA2436*
–
BA4233
–
B4333 B433361
BA4333
–
Min. Depth of Pour
3.75" (95.3)
3.75" (95.3)
Adjustability
Fully
Before Pour External
Height Adjustment
1.25" (31.8)
After Pour Internal
Height Adjustment
B2437*
–
B2414*
BA2414*
B4214
BA4214
3.75" (95.3)
3.00" (76.2)
2.00" (50.8)
2.00" (50.8)
2.00" (50.8)
Fully
Fully
Fully
Semi
Semi
Semi
1.25" (31.8)
1.25" (31.8)
1.25" (31.8)
1.25" (31.8)
1.25" (31.8)
1.25" (31.8)
.38" (9.5)
.63" (15.9)
.63" (15.9)
Cubic Inch (cm3)
Capacity Per Gang
33.0 cu. in.
(540.7 cm3)
36.5 cu. in.
(598.1 cm3)
34.8 cu. in.
(570.3 cm3)
30.0 cu. in.
(491.7 cm3)
16.0 cu. in.
(262.2 cm3)
16.0 cu. in.
(262.2 cm3)
16.0 cu. in.
(262.2 cm3)
Dimensions – A
3.20" (81.3)
3.38" (85.9)
3.38" (85.9)
2.90" (73.7)
2.00" (50.8)
2.00" (50.8)
2.00" (50.8)
Dimensions – B
4.69" (119.1)
4.84" (122.9)
4.90" (122.5)
4.69" (119.1)
5.46" (138.7)
5.46" (138.7)
5.46" (138.7)
Dimensions – C
4.69" (119.1)
8.06" (204.7)
11.41" (289.8)
4.69" (119.1)
4.19" (106.4)
7.49" (190.2)
10.7" (271.8)
Dimensions – D
4.36" (110.7)
4.36" (110.7)
4.36" (110.7)
4.36" (110.8)
4.38" (111.3)
4.38" (111.3)
4.38" (111.3)
Dimensions – E
3.19" (81.0)
6.42" (163.1)
9.64" (244.9)
3.20" (81.3)
3.19" (81.0)
6.38" (162.1)
9.56" (242.8)
Threaded Access
Holes
(4) ¾"
(6) ¾"
(8) ¾"
(4) ¾"
(2) ¾"
(4) ¾"
(6) ¾"
(4) 1"
(4) 1" &
(2) ¾"
.38" (9.5)
(6) 1" &
(2) ¾"
–
–
–
Concrete Cover
Included
Closure Plugs
Included
Removable
LV Barrier
–
–
–
–
–
Note: UL File Number E92074.
CSA File Number LR18416.
*Suitable for single service applications only.
Carpet Flanges
Tapered Flange
Number of Gangs
Dimensions
1-Gang
6.00" x 4.85"
2-Gang
6.00" x 8.13"
3-Gang
6.00" x 11.34"
Brass
Aluminum
Clear Polycarbonate
SB3083
SA3083
S3083
SB3084
SA3084
S3084
SB3085
SA3085
S3085
Covers – One Required per Gang
Brass
Aluminum
Dimensions
4.15" x 2.99"
S3825
SA3825
S3625
SA3625
S3826
SA3826
S2425
SA2425
S2625
SA2625
S2825
—
S3813
SA3813
Duplex
Flap
Duplex
Screw
Style Line®
Decorator Opening
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
Blank
Dimensions in Inches (mm)
O-12
www.hubbell-wiring.com
Floor Boxes
Flush Rectangular Stamped Steel
Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Style
Stamped Steel
D
1-Gang
Deep
2-Gang
Deep
3-Gang
Deep
1-Gang
Shallow
2-Gang
Shallow
3-Gang
Shallow
1-Gang
Deep
1-Gang
Shallow
B2431*
BA2431*
B2432
BA2432
B2433
BA2433
B2421*
BA2421*
B2422
BA2422
B2423
BA2423
B2427*
–
B2429*
–
E
A
B
C
Collar Material:
Brass
Aluminum
Min. Depth of Pour
3.75" (95.3)
3.75" (95.3)
3.75" (95.3)
2.75" (69.9)
2.75" (69.9)
2.75" (69.9)
4.00" (101.6)
3.00" (76.2)
Adjustability
Fully
1.25" (31.8)
Fully
1.25" (31.8)
Fully
1.25" (31.8)
Fully
1.25" (31.8)
Fully
1.25" (31.8)
Fully
1.25" (31.8)
Fully
1.25" (31.8)
Fully
1.25" (31.8)
After Pour Internal
Height Adjustment
.50" (12.7)
.50" (12.7)
.50" (12.7)
.50" (12.7)
.50" (12.7)
.50" (12.7)
.38" (9.5)
.38" (9.5)
Cubic Inch (cm3)
Capacity Per Gang
60.0 cu. in.
(983.2 cm3)
52.8 cu. in.
(865.2 cm3)
50.8 cu. in.
(832.5 cm3)
39.5 cu. in.
(647.3 cm3)
35.0 cu. in.
(573.5 cm3)
34.0 cu. in.
(557.2 cm3)
54.0 cu. in.
(884.9 cm3)
37.3 cu. in.
(611.2 cm3)
Dimensions – A
3.72" (94.5)
3.72" (94.5)
3.72" (94.5)
2.74" (69.6)
2.74" (69.6)
2.74" (69.6)
3.90" (99.1)
2.81" (71.4)
Dimensions – B
4.81" (122.2)
4.81" (122.2)
4.81" (122.2)
4.81" (122.2)
4.81" (122.2)
4.81" (122.2)
4.81" (122.2)
4.81" (122.2)
Dimensions – C
6.00" (152.4)
9.25" (235.0)
12.50" (317.5)
6.00" (152.4)
9.25" (235.0)
12.50" (317.5)
6.00" (152.4)
6.00" (152.4)
Dimensions – D
4.38" (111.3)
4.38" (111.3)
4.38" (111.3)
4.38" (111.3)
4.38" (111.3)
4.38" (111.3)
4.38" (111.2)
4.38" (111.2)
Dimensions – E
3.19" (81.0)
6.44" (163.6)
9.67" (245.6)
3.19" (81.0)
6.44" (163.6)
9.67" (245.6)
3.19" (81.0)
3.19" (81.0)
Knockouts – Sides
(1) ¾",1",1¼"
(2) ¾",1",1¼"
(3) ¾",1",1¼"
(2) ½",(1) ¾"
(4) ½",(1) ¾"
(6) ½",(1) ¾"
(1) ½",(1) 1¼"
(2) ½",(1) ¾"
Knockouts – Ends
(1) ¾",1",1¼"
(1) ¾",1",1¼"
(1) ¾",1",1¼"
(1) ½",(1) ¾"
(2) ½",(1) ¾"
(2) ½",(1) ¾"
(1) ¾",(1) 1"
(1) ½",(1) ¾"
Knockouts – Bottom
(2) ¾",1",1¼"
(4) ¾",1",1¼"
(6) ¾",1",1¼"
(2) ¾",1",1¼"
(4) ¾",1",1¼"
(6) ¾",1",1¼"
(3) ½",(2) ¾"
(3) ½",(2) ¾"
Before Pour External
Height Adjustment
Concrete Cover
Included
Closure Plugs
Included
–
–
–
–
–
–
–
–
Removable
LV Barrier
–
–
–
–
Note: UL File Number E92074.
CSA File Number LR18416.
*Suitable for single service applications only.
Carpet Flanges
Tapered Flange
Number of Gangs
Dimensions
1-Gang
6.00" x 4.85"
2-Gang
6.00" x 8.13"
3-Gang
6.00" x 11.34"
Brass
Aluminum
Clear Polycarbonate
SB3083
SA3083
S3083
SB3084
SA3084
S3084
SB3085
SA3085
S3085
Covers – One Required per Gang
Brass
Aluminum
Dimensions
4.15" x 2.99"
S3825
SA3825
S3625
SA3625
S3826
SA3826
S2425
SA2425
S2625
SA2625
S2825
—
S3813
SA3813
Duplex
Flap
Duplex
Screw
Style Line®
Decorator Opening
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
Blank
Dimensions in Inches (mm)
www.hubbell-wiring.com
O-13
Floor Boxes
Recessed 2-Gang Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Style
Stamped Steel
Cast Iron
2-Gang
2-Gang
3SFBSS
3SFBC
A
B
C
Min. Depth of Pour
3.00" (76.2)
3.00" (76.2)
Adjustability
Before pour
Before pour
Cubic Inch (cm3) Capacity
Per Chamber
22.4 cu. in.
(367.1 cm3)
21.6 cu. in.
(354.0 cm3)
Dimensions – A
2.88" (73.2)
3.00" (76.2)
Dimensions – B
12.20" (309.9)
12.88" (327.2)
Dimensions – C
5.52" (140.2)
6.00" (152.4)
Sides (2) ¾"
Ends (1) 1¼"
Center Area (1) 1¼" (each side)
–
Threaded Access Holes
Sides (2) ¾"
Ends (1) 1"
Center Area (1) Concentric 1",
1¼" (each side)
Knockouts
Concrete Cover Included
Closure Plugs Included
–
–
(1) 3SFBRP and (1) 3SFBTP
Face Plates Included
(1) 3SFBRP and (1) 3SFBTP
Note: UL File Number E31999.
CSA File Number LR18416.
Accessories
On-grade Barrier
The on-grade barrier is intended for use on installations at
grade level. This accessory is installed prior to the concrete
pour and provides a barrier between the soil. The on-grade
barrier comes with leveling feet and anchor points.
CFBOGPAN4
Pour Pan Dimensions:
15.75 in. sq.
4 in. depth
Floor Box Covers with Carpet Recess
Reinforced Non-Metallic Cover
Dimensions
11.88" x 5.20"
3SFBCBRA
3SFBCBKA
3SFBCGYA
3SFBCIA
Brown
Black
Gray
Ivory
Face Plates
3SFBRP
3SFBDS
3SFBS
3SFBB
3SFBTP
3SFBIM
Duplex
Knockout
Style Line®
Decorator Opening
Single Receptacle
Opening
(1.39" boss dia.)
Blank
Voice/Data
(2) Jack Knockouts
(.6" x .75")
3-Unit iSTATION Opening
(See Network Wiring section
for module options)
Dimensions in Inches (mm)
O-14
www.hubbell-wiring.com
Floor Boxes
Recessed 4- and 8-Gang Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Style
Stamped Steel
Cast Iron
4-Gang Deep
4-Gang Shallow
8-Gang Deep
4-Gang Shallow
HBLCFB301BASE
HBLCFB401BASE
HBLCFB501BASE
HBLCFB401CB
A
B
C
Min. Depth of Pour
4.25" (107.6)
3.00" (76.2)
5.25" (133.4)
3.25" (82.6)
Adjustability
Before pour
Before pour
Before pour
Before pour
Cubic Inch (cm3) Capacity
Per Chamber
29.5 cu. in.
(483.4 cm3)
25.5 cu. in.
(417.9 cm3)
49.5 cu. in.
(811.2 cm3)
25.5 cu. in.
(417.9 cm3)
Dimensions – A
4.0" (101.6)
2.63" (66.8)
5.13" (130.3)
3.13" (79.5)
Dimensions – B
10.0" (254.0)
10.0" (254.0)
10.0" (254.0)
10.0" (254.0)
Dimensions – C
10.0" (254.0)
10.0" (254.0)
10.0" (254.0)
10.0" (254.0)
Threaded Access Holes –
Per Chamber
–
–
(1) Concentric ½", ¾"
(1) Concentric ¾", 1"
(1) 1¼"
Knockouts – Per Chamber
–
(3) Concentric ½", ¾"
(2) 1"
(1) Concentric ½", ¾"
(1) Concentric ¾", 1"
(1) 1¼"
Concrete Cover Included
Closure Plugs Included
–
–
–
–
Note: UL File Number E197203.
CSA File Number LR702145.
Floor Box Covers with Carpet Recess
Accessories
Die Cast Metal Cover and Flange Assembly
Dimensions 10.69" x 10.69"
HBLTCGNTSW
HBLTCGNTBKSW
On-grade Barrier
Granite
The on-grade barrier is intended for use on
installations at grade level. This accessory
is installed prior to the concrete pour and
provides a barrier between the soil. The
on-grade barrier comes with leveling feet
and anchor points.
CFBOGPAN4
Pour Pan Dimensions:
15.75 in. sq.
4 in. depth
Black
Hubbell – Screw Type Face Plates*
2.00"
HBLST302SGY
HBLDE301SGY
HBLTO310SGY
HBLTL318SGY
HBLTL319SGY
HBLBL300SGY
Duplex
Style Line®
Decorator
Toggle
Single Receptacle
(1.56" Boss Dia.)
Single Receptacle
(1.39" Boss Dia.)
Blank
HBLIMFSGY
HBL317SGY
3-Unit Hubbell iSTATION
Hubbell
6-Port
4.50"
Typical
(See Network Wiring section
for module options)
Open Systems – Screw Type Face Plates*
HBLAM303SGY HBLAMP313SGY HBLKR314SGY HBLLT309SGY HBLPA308SGY
AMP-ACO
AMP 6-Port
Krone®/Leviton®
SYSTIMAX®
Panduit
Mini-Com®
HBLNO309SGY
NORDX® 6-Port
(Cat. 5e jacks only)
HBLSI305SGY HBLSI315SGY
Siemon
CT® Series
HBLOR306SGY HBLORT322SGY
Siemon
MAX® Series
Ortronics
Series II®
Ortronics
TracJack®
Note: *Catalog numbers indicated are gray, replace “GY” with the following to designate color: “BK” for Black, “I” for Ivory and “WA” for White.
AMP is a registered trademark of Tyco Electronics Corp. Krone® is a registered trademark of Krone, Inc. Leviton® is a registered trademark of Leviton. SYSTIMAX® is a
registered trademark of CommScope, Inc. Mini-Com® and Panduit® are registered trademarks of Panduit Corp. NORDX® is a registered trademark of Belden/CDT, Inc.
MAX® and CT® Series are registered trademarks of The Siemon Company. TracJack ®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
Dimensions in Inches (mm)
www.hubbell-wiring.com
O-15
Floor Boxes
Recessed 6-Gang Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Style
Stamped Steel
Cast Iron
6-Gang
6-Gang
A
B
C
LCFBSSA
LCFBCA
Min. Depth of Pour
3.50" (88.9)
3.65" (92.7)
Adjustability
Fully
Fully
Cubic Inch (cm3) Capacity
Per Chamber
(4) at 38.2 cu. in. (626.0 cm3)
(2) at 25.4 cu. in. (416.2 cm3)
(4) at 36.8 cu. in. (603.0 cm3)
(2) at 25.4 cu. in. (416.2 cm3)
Dimensions – A
6.18" (157.0)
6.35" (161.3)
Dimensions – B
12.95" (328.9)
13.11" (333.0)
Dimensions – C
12.95" (328.9)
13.11" (333.0)
–
(1) ¾" & (1) 1¼"
Threaded Access Holes – Per Chamber
(1) Concentric 1", 1¼"
(1) ¾"
Knockouts – Per Chamber
–
Concrete Cover Included
Closure Plugs Included
–
Cover Mounting Brackets Included*
Note: *Replacements Mounting Brackets available, (1 pair) LCFBBRACKET.
UL File Number E31999. CSA File Number LR18416.
Accessories
On-grade Barrier
The on-grade barrier is intended for use on installations at
grade level. This accessory is installed prior to the concrete
pour and provides a barrier between the soil. The on-grade
barrier comes with leveling feet and anchor points.
CFBOGPAN4
Pour Pan Dimensions:
15.75 in. sq.
4 in. depth
Recessed Floor Box Covers
Smooth Metallic Cover,
Flange and Cable Doors
for Carpet Applications
Cover Dimensions
10.30" x 10.30"
Aluminum Finish
Brass Finish
Black
Gray
LCFBCALTC
LCFBCBRSTC
LCFBCBKTC
LCFBCGYTC
Metallic Cover,
Flange and Cable Doors
for Carpet Applications –
Carpet Insert Required
Cover Dimensions
10.30" x 10.30"
Aluminum Finish
Brass Finish
Black
Gray
LCFBCALC
LCFBCBRSC
LCFBCBKC
LCFBCGYC
Reinforced Non-Metallic Cover,
Flange and Cable Doors
for Carpet Applications –
Carpet Insert Required
Cover Dimensions
10.30" x 10.30"
Black
Brown
Gray
Ivory
LCFBCBKA
LCFBCBRA
LCFBCGYA
LCFBCIA
Smooth Metallic Cover and
Cable Doors for Tile Applications
Cover Dimensions
8.31" x 7.70"
Aluminum Finish
Brass Finish
Black
Gray
LCFBCALT
LCFBCBRST
LCFBCBKT
LCFBCGYT
Face Plates
4.52"
LCFBP8
LCFBP26
LCFBP720
LCFBIM
LCFBP14
Duplex
Style Line®
Decorator Opening
Single Receptacle
(for 1.56" boss dia.)
3-Unit Hubbell iSTATION
(See Network Wiring section
for module options)
Blank
1.88"
4.04"
Typical
Dimensions in Inches (mm)
O-16
www.hubbell-wiring.com
Floor Boxes
Large Capacity Concrete Floor Boxes
with Round Cover
Complies with UL514A
Hubbell’s LCFB Adapter System allows users to integrate Hubbell’s
SystemOne Round Covers with Hubbell’s Six-Gang Large Capacity
Floor Box. This combination provides greater capacity, durability,
flexibility with an attractive finish. Covers are available in a variety of
architectural finishes including brass, nickel and aluminum. These
covers provide a common round look and finish between Hubbell
SystemOne Recessed Fire-Rated Poke-Throughs and the Six-Gang
Large Capacity Floor Box (with the use of the LCFB adapter) —
enhancing building decor.
The round shape of the SystemOne cover allows for the products
to be installed in any location or orientation without having concern
for parallel lines in the building floor while the device capacity of the
Large Capacity Floor Box allows for power, data and audio visual to
be combined into a common floor box.
• Round cover to match Fire-Rated Poke-Through installations
• Eight distinct mounting directions
• Drop down cable access doors to reduce trip hazards
• Post pour adjustability
• Egress door brushes reduce ingress of dirt
• Five aesthetically pleasing finishes
Dimensions Inches (mm)
Style
6-Gang
A
B
C
LCFBS1R8ADAPT
Adjustability
Post pour
Vertical Adjustability Range
¹⁄₈" minimum to ³⁄₈" maximum finished floor height
Dimensions – A
.89" (22.6)
Dimensions – B
10.13" (257.3)
Dimensions – C
9.25" (235.0)
Cover Orientation Positions
Eight (8); every 45°
Material
Galvanized sheet metal
Compatible Floor Boxes
LCFBSSA, LCFBCA
Note: *Will sit approximately 1/8" above level of concrete floor after installation. Concrete will need to be graded after initial pour to remove potential ridges.
Compatible SystemOne Recessed 8" Covers
Finish
Catalog Number
Brushed Aluminum
S1R8CVRALU
Black Powder Coat
S1R8CVRBLK
Brushed Brass Plated
S1R8CVRBRS
Bronze Plated Finish
S1R8CVRBRZ
Satin Nickel Plated
S1R8CVRNKL
Brushed
Aluminum
Black
Powder Coat
Brushed
Bronze Plated
Brass Plated
Finish
Satin Nickel
Plated
Note: Must order adapter LCFBS1R8ADAPT when using S1R8CVRxxx covers on
LCFBxx floor boxes.
Dimensions in Inches (mm)
www.hubbell-wiring.com
O-17
Floor Boxes
Recessed 7- and 11-Gang Concrete Floor Boxes
Complies with UL514A
Dimensions Inches (mm)
Style
CFB7G Series
CFB11G Series
7-Gang
11-Gang
A
B
C
CFB7G4
4.08" (103.5)
CFB7G6
6.08" (154.3)
CFB11G4
4.08" (103.5)
CFB11G6
6.08" (154.3)
Before Pour
4.08" (103.5)
10.0" (254.0)
12.2" (309.9)
Before Pour
6.08" (154.3)
10.0" (254.0)
12.2" (309.9)
Before Pour
4.08" (103.5)
13.5" (342.9)
12.2" (309.9)
Before Pour
6.08" (154.3)
13.5" (342.9)
12.2" (309.9)
Back
(4) x 1", 1¼" Concentric
(3) x 1", 1¼", 1½" Concentric;
(1) x 2"
(4) x 1", 1¼", 1½" Concentric
(3) x 1", 1¼", 1½" Concentric;
(1) 2"
Bottom
(4) x 1", 1¼", 1½" Concentric
(4) x 1", 1¼", 1½" Concentric
X - 1.01"
Y - 2.41"
Z - 3.51"
X - 2.37"
Y - 3.77"
Z - 3.65"
(4) x 1", 1¼" Concentric
(2) ¾", 1" Concentric;
(4) 1", 1¼", 1½" Concentric,
(1) 2"
(5) 1", 1¼", 1½" Concentric;
(2) ¾", 1" Concentric
X - 1.02"
Y - 2.42"
Z - 3.50"
(4) x 1", 1¼", 1½" Concentric
(2) ¾", 1" Concentric;
(4) 1", 1¼", 1½" Concentric,
(1) 2"
(5) 1", 1¼", 1½" Concentric;
(2) ¾", 1" Concentric
X - 2.37"
Y - 3.81"
Z - 3.72"
(1) 1-Gang
(1) 2-Gang
(1) 4-Gang
(1) 1-Gang
(1) 2-Gang
(1) 4-Gang
(2) 1-Gang
(1) 3-Gang
(1) 6-Gang
(2) 1-Gang
(1) 3-Gang
(1) 6-Gang
Min. Depth of Pour
Adjustability
Dimensions:
A
B
C
Trade Size Knockouts:
Sidewalls
Side View
Depth behind
mounting
plate
Y
Z
X
Accepts industry
standard size wallplates (sold
separately)
Interior Configuration
1-Gang
2-Gang
1-Gang
3-Gang
4-Gang
6-Gang
Note: UL File Number E31999.
CSA File Number LR18416.
Accessories
CFBOGPAN4
On-grade Barrier
The on-grade barrier is intended for use on installations at
grade level. This accessory is installed prior to the concrete
pour and provides a barrier between the soil. The on-grade
barrier comes with leveling feet and anchor points.
Pour Pan Dimensions:
15.75 in. sq.
4 in. depth
Floor Box Covers
CFB7G Series
CFB11G Series
Brass
Flange and cover;
Beveled edge for carpet
CFB7CVRBRS
Flange and cover;
Square edge for tile
CFB7TBRS
Aluminum
Brass
¼" Edging
Aluminum
¼" Edging
CFB7CVRALU
CFB11CVRBRS
CFB7TALU
CFB11TBRS
½" Edging
CFB11CVRALU
¼" Edging
CFB11TALU
Note: Covers provide a recessed area, allowing floor covering to be inserted.
Dimensions in Inches (mm)
O-18
www.hubbell-wiring.com
Floor Boxes
Recessed Ballroom Series Floor Boxes
Complies with UL514A
8-Gang 20,000 lb Cover
Dimensions Inches (mm)
Style
CFB8FC Series
8-Gang
8-Gang
C
B
A
CFB8FC1
Application
Min. Depth of Pour
CFB8FC2
Carpet
Tile, Finished Concrete
6.95” [177mm]
7.15” [182mm]
Before Pour
Before Pour
Dimensions:
A
B
C
6.95" (176.5)
15.00" (176.5)
13.00" (330.2)
7.15" (181.6)
14.75" (374.7)
12.75" (323.9)
Trade Size
Knockouts:
Sidewalls
Back
Bottom
(4) x 1.5", 1.25", 1" concentric
(4) x 1.5", 1.25", 1" concentric
(4) x 1.5", 1.25", 1" concentric
(4) x 1.5", 1.25", 1" concentric
(4) x 1.5", 1.25", 1" concentric
(4) x 1.5", 1.25", 1" concentric
X = 2.27" (57.7)
Y = 4.01" (101.9)
Z = 3.13" (79.5)
X = 2.27" (57.7)
Y = 4.01" (101.9)
Z = 3.13" (79.5)
One, two, three and four gang plates.
Customer configuration dependant.
One, two, three and four gang plates.
Customer configuration dependant.
Adjustability
Side View
Depth behind
mounting
plate
Y
Z
X
Accepts industry standard
size wallplates (sold separately)
4.63" Maximum Cover Height
4-Gang
4-Gang
4-Gang
4-Gang
Accessories
On-grade Barrier
The on-grade barrier is intended for use on installations at
grade level. This accessory is installed prior to the concrete
pour and provides a barrier between the soil. The on-grade
barrier comes with leveling feet and anchor points.
CFBOGPAN4
Pour Pan Dimensions:
15.75 in. sq.
4 in. depth
Covers
CFB8FC1 Covers
CFB8FC2 Covers
All ballroom floor box covers are
machined from Aluminum and have
no additional finish options
Carpet Cover, with 2 egress doors (0.20” depth)
Flush cover, with 2 egress doors
Blank box cover
Cover Load Ratings*:
Recommended Loading
Maximum Load
CFB8CVRALU1
–
–
–
–
CFB8JBC1
–
CFB8CVRALU2
–
–
–
CFB8JBC2
20,000 lb
40,000 lb
20,000 lb
40,000 lb
20,000 lb
40,000 lb
20,000 lb
40,000 lb
Note: *Load applied through 3" (76mm) mandrel in center of cover. Loads are static and don't apply to rolling loads.
www.hubbell-wiring.com
Dimensions in Inches (mm)
O-19
Floor Boxes
Flush Floor Boxes for Wooden Floors
Complies with UL514A
Dimensions Inches (mm)
Style
Rectangular Stamped Steel
2-Gang
1-Gang
C
Round Cast Iron
1-Gang
3-Gang
1-Gang
A
A
B
B
C
Collar Material
Brass
B2481*
B2482
B2483
B2588*
B2588275*
Adjustability
Semi
Semi
Semi
Non
Non
Cubic Inch (cm3) Capacity
Per Gang
42.0 cu. in.
(658.3 cm3)
42.5 cu. in.
(696.5 cm3)
42.5 cu. in.
(696.5 cm3)
18.5 cu. in.
(303.2 cm3)
18.5 cu. in.
(303.2 cm3)
Dimensions – A
3.13" (79.5)
3.13" (79.5)
3.13" (79.5)
3.65" (92.7)
3.65" (92.7)
Dimensions – B
4.50" (114.3)
4.50" (114.3)
4.50" (114.3)
3.22" (81.8)
3.22" (81.8)
Dimensions – C
3.20" (81.3)
6.42" (163.1)
9.64" (244.9)
4.09" (103.9)
4.09" (103.9)
Sides (2) ¾"
Bottom (2) ½"
–
–
Threaded Access Holes
–
(1) ½", ¾", 1"
Knockouts – Sides
(2) ½", ¾", 1"
–
Knockouts – Ends
–
–
Bottom (2) ½"
(3) ½", ¾", 1"
–
–
–
–
(1) ½" - 1¼"
(2) ½" - 1¼"
(3) ½" - 1¼"
–
–
Debris Cover Included
–
–
Closure Plugs Included
–
–
–
Removable LV Barrier
–
–
–
Knockouts – Bottom
Note: UL File Number E31999. CSA File Number LR18416.
*Suitable for single service applications only.
Rectangular Flanges (Required)
Round Flanges
Round Covers (3.88" Dia.)
Brass
Aluminum
SB3083W
SA3083W
SB3084W
SA3084W
SB3085W
SA3085W
S3182
SA3182
S3082
SA3082
S3925
SA3925
S3725
SA3725
S2525
SA2525
No. of Gangs
Dimensions
1-Gang
6.00" x 4.85"
2-Gang
6.00" x 8.13"
3-Gang
6.00" x 11.34"
5.25" Dia.
6.25" Dia.
Duplex Flap
Duplex Screw
2¹⁄₈" x ¾" Comb.
Covers – One Required per Gang
Brass
Aluminum
Dimensions
4.15" x 2.99"
Brass
Aluminum
Dimensions
4.15" x 2.99"
Round Covers
S3825
SA3825
S3625
SA3625
S3826
SA3826
S2425
SA2425
Duplex
Flap
Duplex
Screw
Style Line®
Decorator
Opening
2¹⁄₈" x ¾"
Combination
S2625
SA2625
S2825
–
S3425
–
S3813
SA3813
Brass
Aluminum
3.88" Dia.
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
S2925
SA2925
S3525
–
S3325
–
2¹⁄₈" x 1" Comb.
2¹⁄₈" Single
Receptacle
2³⁄₈" Single
Receptacle
2¹⁄₈" Single Rec.
(Terrazzo Floor)
One Piece Brass Cover and Carpet Flange
Brass
6.25" Dia.
2¹⁄₈" x 1"
Combination
S2725
SA2725
SF3925
SF2525
SF2725
SF2925
Duplex Flap
2¹⁄₈" x ¾"
Combination
2¹⁄₈" x 1"
Combination
2¹⁄₈" Single
Receptacle
Blank
Dimensions in Inches (mm)
O-20
www.hubbell-wiring.com
Floor Boxes
Above-Floor Service Fittings (Single Service)
Hubbell offers a variety of above-floor service pedestals to satisfy just about any
requirement. Large capacity enables a choice of services—you can even create your
own unique pedestal to satisfy specific requirements. Above floor service fittings are
ideal for furniture feed applications.
Pedestals – Metallic – LO-CON (single service only)
Traditional metallic pedestals with die-cast aluminum frame, brushed aluminum housing and
stainless steel faceplates. These pedestals are offered as component parts. They mount
on floor box covers or floor deck/duct systems with ¾-inch or 1-inch threaded openings.
Create Pedestal – Create your own pedestal to meet
specific service requirements. Order housing, face
plates and devices separately.
SC3098A
SC3099A
Description
Catalog Number
Frame, housing, ¾ in. chase nipple, without plates.
Frame, housing, 1 in. chase nipple, without plates.
Blank plate.
Telephone bushing with 1 in. I.D. and (2) ³⁄₈ in. KO for coax.
Single receptacle plate with 1.39 in. (35.3) opening.
Duplex receptacle plate.
Style Line® decorator plate.
SC3098A
SC3099A
SS309B
SS309T
SS309S
SS309D
SS309DS
SS309D
SS309DS
3.00"
(76.2)
2.62"
(66.5)
Furniture Feed Plates – Use with SC3098A or SC3099A housings
to feed furniture systems in office settings or display cases in
retail applications.
Description
Catalog Number
Aluminum plate with ¾ in. trade size knockout.
Aluminum plate, blank.
SS309SF
SS309BF
2-Gang
Note: When using SS309SF on Hubbell’s LO-CON pedestals, SS309BF must be used on the opposite side.
2.88"
(73.1)
Pedestals – Specialized Service – Large Capacity Pedestals
(single service only)
Designed to accommodate receptacles up to 50A (4-gang only). These brushed aluminum
pedestals are furnished with either a ¾-inch or 1-inch hub and are designed for mounting to
floor box covers with ¾-inch or 1-inch threaded openings. Create your own unique pedestal
with a wide choice of stainless steel plates and devices.
Description (2-Gang Housing)
Catalog Number
2-gang (front and back) with ¾ in. hub.
2-gang (front and back) with 1 in. hub.
SA6685
SA6686
4.38"
(111.3)
2.63"
(66.8)
2.50"
(63.5)
5.63"
(143.0)
1"
(25.3)
SA6685
SA6686
Plate Option – 1-Gang
Description
Catalog Number
Duplex opening.
Style Line® decorator opening.
Single receptacle opening – boss diameter
1.36 to 1.39 in. (34.5 to 35.3).
Single receptacle opening – boss diameter
1.55 to 1.58 in. (39.4 to 40.1).
Blank plate.
SS8
SS26
SS7
Description (4-Gang Housing)
Catalog Number
4-gang (2 front and 2 back), with ¾ in. hub.
4-gang (2 front and 2 back), with 1 in. hub.
SA6687
SA6688
SS7
4.69"
(119.1)
SS13
2.50"
(63.5)
5.63"
(143.0)
Plate Option – 2-Gang
Catalog Number
Two duplex openings.
Two Style Line® decorator openings.
Two single receptacle openings – boss diameter
1.36 to 1.39 in. (34.5 to 35.3).
Single receptacle opening – boss diameter
2.41 to 2.44 in. (61.2 to 62.0).
Single receptacle opening – boss diameter
2.09 to 2.13 in. (53.1 to 54.1).
Blank plate.
SS82
SS262
SS72
www.hubbell-wiring.com
SS26
4-Gang
SS720
Description
SS720
1"
(25.3)
SA6687
SA6688
SS701
SS703
SS23
SS82
SS262
Dimensions in Inches (mm)
O-21
Floor Boxes
Flush Non-Metallic Floor Box For Concrete Floors
Residential Delivery Systems
The Hubbell Round Non-Metallic Floor Box offers an economical solution for electrical power or a combination of power and
voice/data applications. Designed specifically for slab-on-grade installation. Quick and easy installation is assured using a
push in place leveling system.
Removable neoprene gaskets
allow for independent use of either
side of the receptacle with the
cover closed
Pre-assembled flange;
cover and leveling ring
for quick installation
Recessed receptacle minimizes plug
protrusion; allowing furniture to be
located over the plug
Cut box after pour for
height adjustment
Apply PVC glue to the leveling ring
and simply push into place; hold
and wait 10 seconds; automatically
levels the cover to the floor
Parallel PVC hubs for
1 and ¾ inch conduit
The Right Choice for that Perfect Finishing Touch!
Solid Brass
Almond
Black
Chestnut Brown
Gray
Note: Not all configurations are available in all colors. See below for details.
Floor Box for Structural Concrete Floors
RF406BK
RF400
Description
Material
Color
Catalog Number
Flange and hinged door cover assembly; includes tamperresistant duplex receptacle 15A 125V; gasket; floor leveling
PVC ring; high impact and chemically resistant nylon; factory
pre-assembled for easy drop-in installation.
Solid Brass
Thermoplastic
Thermoplastic
Thermoplastic
Thermoplastic
—
Almond
Black
Chestnut Brown
Gray
RF406BR
RF406AL
RF406BK
RF406BN
RF406GY
Flush fit for hardwood and tile floors (same as above).
Solid Brass
Floor box with concrete protective cover; accepts ¾ in. and
1 in. schedule 40 and schedule 80 PVC conduit; includes
round box (4 7/8 in. dia