118604 Catalog
596050-Attachment 596050-Attachment 596050-Attachment 768386 Batch5 unilog cesco-content
118520-Attachment 118520-Attachment 118520-Attachment 014364 Batch10 unilog cesco-content
118604-Catalog 118604-Catalog 118604-Catalog 043168 Batch5 unilog cesco-content
118604-Catalog 118604-Catalog 118604-Catalog 768386 Batch5 unilog cesco-content
596057-Attachment 596057-Attachment 596057-Attachment 768386 Batch7 unilog cesco-content
2014-07-05
: Pdf 118604-Catalog 118604-Catalog 014364 Batch5 unilog
Open the PDF directly: View PDF .
Page Count: 193
Download | |
Open PDF In Browser | View PDF |
Ballast Navigator Universal Lighting Technologies is a member of the Panasonic Group Table of Contents Fluorescent Electronic Ballasts Section 1- Page Product Overview............................................................................................................................................1-2 Application Operation Information.................................................................................................................1-4 Typical Specifications......................................................................................................................................1-7 F17T8.............................................................................................................................................................1-13 F25T8.............................................................................................................................................................1-15 F32T8 (32, 30, 25 & 28 Watt Four Foot Lamps)........................................................................................1-19 F28T8 (32, 30, 25 & 28 Watt Four Foot Lamps)........................................................................................1-29 F40T8.............................................................................................................................................................1-32 F96T8 Slimline..............................................................................................................................................1-34 F96T8HO High Output.................................................................................................................................1-35 T5....................................................................................................................................................................1-36 T5HO..............................................................................................................................................................1-38 T12 .................................................................................................................................................................1-42 T12 Slimline...................................................................................................................................................1-44 T12HO High Output......................................................................................................................................1-46 T2....................................................................................................................................................................1-47 Energy Management Systems Section 2- Page --DCL With DEMANDflex Product Overview............................................................................................................................................2-2 DEMANDflex T8............................................................................................................................................2-3 DEMANDflex T5, T5HO & TT5...................................................................................................................2-6 DEMANDflex T8 Wiring Diagrams..............................................................................................................2-7 DCL Controls...................................................................................................................................................2-8 FOR MORE INFORMATION CALL i 1-800-BALLAST (225-5278) Table of Contents Controllable Lighting Section 2- Page --Fluorescent Energy Management/Dimming Ballasts and Controls Product Overview..........................................................................................................................................2-10 -- BallaSTAR Light Level Switching.........................................................................................................2-10 -- SuperDim Analog Dimming...................................................................................................................2-11 -- DaliPRO Digital Dimming......................................................................................................................2-12 -- VariPRO Parallel-Lamp Dimming.........................................................................................................2-13 -- LevelPRO Parallel-Lamp Dimming.......................................................................................................2-13 Application Operation Information...............................................................................................................2-14 Controls for Analog Dimming Ballasts........................................................................................................2-15 DaliPRO.........................................................................................................................................................2-16 DaliPRO Premium.........................................................................................................................................2-17 SuperDim.......................................................................................................................................................2-18 BallaSTAR 0-10 Volt....................................................................................................................................2-19 BallaSTAR Light Level Switching...............................................................................................................2-20 Dimensions & Wiring Diagrams..................................................................................................................2-22 VariPRO.........................................................................................................................................................2-23 LevelPRO.......................................................................................................................................................2-26 Table of Contents Compact Fluorescent Ballasts Section 3- Page Product Overview............................................................................................................................................3-2 Understanding Compact Fluorescent Technology.........................................................................................3-3 Configurations..................................................................................................................................................3-4 Lamp Matrix....................................................................................................................................................3-5 Typical Specifications......................................................................................................................................3-6 Nomenclature...................................................................................................................................................3-7 13-26 Watt Twin, Quad and Triple.................................................................................................................3-9 32 to 70 Watt Triple and Multiple................................................................................................................3-10 2D...................................................................................................................................................................3-12 T5 Circular.....................................................................................................................................................3-15 Long Twin T5................................................................................................................................................3-16 High Intensity Discharge (HID) Ballasts Section 4- Page Product Overview............................................................................................................................................4-2 Oil Filled Capacitors........................................................................................................................................4-4 Dry Capacitors.................................................................................................................................................4-5 Bracket Reference Chart..................................................................................................................................4-6 Application and Operation Information..........................................................................................................4-7 Nomenclature.................................................................................................................................................4-10 Typical Specifications....................................................................................................................................4-11 Distributor Replacement Kits........................................................................................................................4-12 Core and Coil Metal Halide ........................................................................................................................................4-16 Pulse Start Metal Halide......................................................................................................................4-20 High Pressure Sodium..........................................................................................................................4-27 50 Hz Core and Coil Ballasts........................................................................................................................4-33 F-Can Ballast..................................................................................................................................................4-37 Ignitors............................................................................................................................................................4-38 Reference Drawings.............................................................................................................................4-40 Table of Contents Electronic High Intensity Discharge (eHID) Ballasts Section 5- Page Product Overview............................................................................................................................................5-2 Product Family Chart.......................................................................................................................................5-3 Wiring Diagrams..............................................................................................................................................5-4 Dimensions.......................................................................................................................................................5-5 Application and Operation Information..........................................................................................................5-8 Lampholders Section 6- Page Application and Operation Information..........................................................................................................6-2 T8 & T12..........................................................................................................................................................6-5 T5......................................................................................................................................................................6-9 HID.................................................................................................................................................................6-11 Halogen..........................................................................................................................................................6-15 CFL.................................................................................................................................................................6-19 Sign Ballasts Section 7- Page Application and Operation Information..........................................................................................................7-2 Sign Ballast Footage Chart & Lead Lengths..................................................................................................7-3 Electronic Sign Ballasts...................................................................................................................................7-4 FOR MORE INFORMATION CALL ii 1-800-BALLAST (225-5278) Table of Contents Glossary Section 8- Page ..........................................................................................................................................................................8-1 Index Section 9- Page ..........................................................................................................................................................................9-1 Warranty Section 10- Page ........................................................................................................................................................................10-1 Table of Contents FOR MORE INFORMATION CALL iii 1-800-BALLAST (225-5278) Electronic Fluorescent Ballasts A Complete Range of Solutions — From The Name You Trust For more than 30 years, the lighting industry has relied on our TRIAD® brand for the most specified, most installed, most reliable electronic ballasts in the business. The TRIAD® line offers advantages like installer-friendly universal input voltage, which ensures that you have the right voltage ballast every time, and maximum energy savings for long cycle operations. And our ULTim8® and AccuStart™ ballasts feature high efficiency designs and programmed start technology that dramatically enhances lamp life. Universal Lighting Technologies is a member of the Panasonic Group Fluorescent-Electronic Fluorescent-Electronic Universal is the leader in energy saving electronic ballasts. Product Overview Setting The Pace In T8 Technology Universal Lighting keeps pushing the frontier of T8 technology with innovative products that deliver dramatic energy savings, greater fixture design flexibility, longer lamp life and installation ease. You can count on Universal for some of the industry’s highest efficiency and most hassle-free T8 ballasts. Universal offers high efficiency T8 ballasts for Instant Start and Programmed Start applications. These ballasts deliver up to 6% additional energy savings over standard electronic ballasts, even more when used with the new F32T8/ES (25 Watt), F32T8/ES (30 Watt) or F28T8 (28 Watt) lamps. Our T8 ballasts are CEE and NEMA Premium compliant. TRIAD® and ULTim8 Instant Start Applications Instant Start technology for continuous operation and installer friendly Universal input voltage. Maximizes energy savings for long cycle operations. - Some of the most efficient ballasts in the industry for maximum energy savings. - Available in high efficiency HE normal (.88), EL low (.77), and HEH high (1.18) ballast factor versions. - Independent lamp operation simplifies troubleshooting. Lamps stay lit if one lamp fails preventing fixtures from going dark and replacing lamps unnecessarily. - Lamp will auto-restrike as a standard feature allowing replacement of lamps without recycling power. - Anti-striation control for better light quality when using energy saving lamps. - Universal input voltage, installer friendly. - Because these ballasts are CEE and NEMA Premium compliant they may qualify for utility incentives. - Backed by 5 year warranty when operated at 75° C max case temperature. Fluorescent-Electronic ULTim8® Programmed Start Applications Features true parallel lamp operation and fast start time (<700ms) so that if one lamp fails, other lamps stay lit. “Soft start” technology maintains lamp life, making these the perfect choice for high-cycling applications like occupancy sensors. Designed for use with 30, 28 and 25 Watt energy saving lamps for even more energy savings. - Same benefits as Instant Start plus ... - Available in high efficiency HE normal (.88) and EL low (.71), and HEH (1.18) ballast factor versions. - Programmed Start ballasts are designed to quickly pre-heat lamp cathodes up to their optimum starting temperature and ignite the lamps quickly. - Filament cut out on HE and HEH models for instant start level efficiency. - The quick ignition results in long lamp life without the typical long delay during turn-on. - Same 5 year warranty as instant start or 3-year warranty for HEH modules when operated at 90° C case temperature. High Lumen and High Bay Applications ULTim8® High Lumen ballasts are the high efficiency high ballast factor choice for high lumen T8 applications. ULTim8® HB ballasts are designed to provide excellent performance in the high ambient temperature applications where high bay fluorescent fixtures are installed. EL Ballasts: Used often when retrofitting existing T12 fixtures with T8 lamps to tune down lamp output. Application areas include stairwells, hallways, bathrooms and other areas that are lit partially during the day. They are good for using in low light level areas. Change light levels with ballast factor. HE Ballasts: Used often in new construction, the high efficiency version of our standard HP product. Used for frequently switched applications including occupancy sensors and daylight harvesting. They are a good solution for education, commercial offices and retail. HEH Ballasts: Used to overdrive lamps. Use these for areas with high light output. They are a great solution for high bay fixtures including applications for warehouses and manufacturing. PAGE 1-2 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Product Overview T5 & T5HO Ballasts For Architectural and High Bay Applications Whether it’s for new construction or a retrofit project, Universal’s T5 and T5HO ballasts, with their smaller size and high lumen output, have become the dominant player in architectural and high bay applications. Programmed Start ballasts feature a “soft start” technology that maximizes lamp life, making them the perfect choice for high cycling applications including those involving occupancy sensors and wall switches. High Efficiency (AccuStart5®, ULTim5®): Our high efficiency T5 and T5HO ballasts are ideal for bathrooms, hallways, stairwells, gymnasiums, classrooms, libraries, corridors, offices, recessed volumetric strips, wraps, wall washing, displays, direct/indirect lighting, surface mount, cove, under cabinet or task lighting. Common applications include: commercial, retail, hospitality, restaurants, law offices, medical, institutional, airports, and schools. The AccuStart5® and ULTim5® lines of linear fluorescent T5 and T5HO ballasts offer broad appeal to the most common applications. Universal input voltage (108-305 volts). T5 ballasts support (1) or (2) 2’ F14T5, 3’ F21T5, 4’ F28T5, and 5’ F35T5 full wattage and energy saving lamps. T5HO ballasts support (1) or (2) 2’ F24T5HO 3’ F39T5HO and (1) (2) (3) or (4) 4’ F54T5HO full wattage and energy saving lamps. High Bay (AccuStart5HB®): T5HO High Bay ballasts are ideal for new construction and fixture retrofits in gymnasiums, high bay retail stores and warehouses, manufacturing sites, industrial facilities and similar applications. These High Output ballasts are well suited for applications where space is at a premium, including slim pendant mounted fixtures, cove and task lighting. AccuStart5HB ballasts offer a replacement opportunity for traditional HID high bay applications. Light up the aisles for the forklift operator when lighting is needed. Keep spaces lit when and where needed. Universal offers the AccuStart5HB® line of linear fluorescent T5HO ballasts for High Bay applications. Ideal for extreme temperature (90° C Case Warranty). Universal input voltage (108-305 volts) and high range voltage (347-480 volts). These ballasts support (2) and (4) 117, 119, 120, 182, 184, 229 and 235 watt T5HO ballasts. Canadian Voltage: Universal offers Canadian voltage in 347V and high range voltage. These ballasts come in standard efficiency, high efficiency and High Bay for T5 and T5HO applications. Fluorescent-Electronic Family of Universal HP Ballasts. Flexible Fixture design options for T5 and T5HO lamps. PAGE 1-3 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Application And Operating Information SAFETY NEC & UL Requirements Ballast installation presents the possibility of exposure to potentially hazardous voltages and should be performed only by qualified personnel. All installation, inspection and maintenance should be performed only with power to the fixture turned off. Additionally, all fixtures and ballasts must be installed and operated in compliance with the National Electrical Code, Underwriters Laboratories Inc. (UL) requirements, and all local applicable codes and regulations. Polarity Polarity refers to the proper connection of ballast lead wires to line wires. To aid you in a correct installation, Universal ballast leads are color-coded for easy identification. The WHITE ballast lead is to be connected to the neutral (grounded) and the BLACK (or black with white tracer) lead always to the phase (“hot”) line wire. Systems where neither of the line wires are at ground potential require specially designed ballasts. A change in polarity may result in the voltage from the lead to the ground exceeding UL-specified limits. In some types of ballasts, a change in polarity may decrease voltage from the lead to the ground, thereby impeding the starting dependability of the ballast. Grounding Ballast cases and fixtures must always be grounded. The ballast case may be grounded to the fixture or otherwise grounded. It could be hazardous to make contact with an ungrounded fixture or ballast when in operation. Neglecting to properly ground the ballast and fixture combination may also result in failure of certain lamps to start or for unacceptable levels of electromagnetic noise to be conducted onto the power lines. Operating Line Voltage Limits To receive the full benefits of rated lamp output and to prolong ballast life, it is essential that voltage supplied to an installation be maintained within limits prescribed for each circuit. These limits are listed below: Nominal Voltage 120 220 277 347 120-277 (UNV) 347-480 (HRV) VOLTAGE RANGE Minimum Maximum 108 198 249 312 108 312 132 242 305 382 305 528 Fluorescent-Electronic Subjecting a ballast to excessive voltage for an extended period results in the deterioration of the insulation. This insulation breakdown will cause early ballast failure. Low voltage has no damaging effect on the ballast. However, lamps may not start reliably, and early lamp failure could result. Internal Ballast Protection Class P Classification - Since January 1, 1984, the National Electrical Code requires that “where Fluorescent fixtures are installed indoors, the ballast shall have thermal protection integral within the ballast except for simple reactance ballasts.” This ruling applies to replacement ballasts as well as to those contained within new fixtures. In compliance with the National Electrical Code, UL has established a Class P ballast classification for fluorescent light fixtures. A Class P ballast must employ internal thermal protection limiting its operating temperature. Universal UL-approved Class P ballasts comply with the National Electrical Code requirement and are equipped with an automatic resetting thermal protector, built-in and adjacent to the transformer coils. The resetting thermal protector functions as a thermostat which will open and temporarily deactivate the ballast when it exceeds the permissible temperature. It will reset when the ballast cools to a safe operating temperature. The ballast will continue to cycle until the cause of overheating is eliminated. If the ballast is defective, it must be replaced. If the cause is external, a Class P ballast will resume normal operation after abnormal conditions are eliminated. PAGE 1-4 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Application And Operating Information SAFETY Dimming Ballasts - Ballastar® Dimming Ballasts are controlled by using 10-0vDC. Care should be taken to insure that the line voltage (AC) wires are not connected to the low voltage DC wires. Ballastar® Electronic Dimming Ballasts have protection (safety) circuitry, that will sense the error so as not to harm the installer or the ballast. Dimming ballasts manufactured after May 1999 have the protection circuit. Dimming ballasts manufactured before this date do not have low voltage circuit protection. Fusing - Class P ballasts do not require fusing. Fusing can be used when a single circuit has a large number of fixtures/ballasts. For a comprehensive list of appropriate fuses, contact our Technical Engineering Services (TES) Department at 1-800-BALLAST or check out our TES home page at www.unvlt.com. Grounding - ANSI C82.1 recommends all fixtures and ballasts be grounded. Universal requires all electronic ballasts be grounded. Thermal Protection - All Universal electronic ballasts meet UL 935 Standard for thermal protection. These ballasts are designated Class P. A Class P ballast will disconnect the ballast from input power in the event of internal over-temperature. PERFORMANCE Lamp Connections Fluorescent ballasts are designed to generate voltages in excess of 300 volts. It is imperative that proper connection to quality Lampholders be assured in accordance with wiring diagrams on each page of the catalog and on product labels. Some applications may not require the use of all of the ballast output leads. If any leads are not to be connected, each should be individually capped and insulated to at least 600 volts. Application Versatility Many Universal models are designed to allow for applications with different types or quantities of lamps. Lamp applications not listed on label cannot be warranted. Audible Noise (Sound) Electrical equipment, including most fluorescent lamp ballasts, produces some noise. Care must be taken to select a ballast with the proper sound rating for a particular lighting installation. Secure mounting can reduce the potential for audible noise. EMI/RFI Electronic ballasts operate at high frequency and, therefore, may produce radio frequency interference (RFI) or electromagnetic interference (EMI). Some sensitive electrical equipment such as televisions, radios, or some medical equipment can be adversely affected by this RFI or EMI interference. Currently the electronic frequencies from 450 kilohertz (kHz) to 300 megahertz (MHz) are regulated by the FCC. For electronic ballasts, the limits and regulations are listed in the Code of Federal Regulations, Title 47, Part 18, Subpart C titled RF Lighting Devices. ULT provides ballasts compliant with non-consumer limits for commercial applications, as well as several models in compliance with consumer limits for residential use. See the Data Sheets for the electronic ballast of interest to determine which FCC requirement, consumer or non-consumer the particular product meets. Remote Mounting Excessive hot or cold temperatures, audible noise requirements, or a desire to operate lamps in more than one fixture with the same ballast (tandem), may make it desirable to mount the ballast remotely. Care must be taken to allow for ballast heat dissipation and proper grounding. Lead lengths in excess of those noted cause loading effects that can dramatically impact ballast performance and void the warranty. See individual data sheets to determine all wiring options. PAGE 1-5 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic In any application, the wire used to extend leads must be at least as large as the wire supplied on the ballast (18 AWG) with an insulation rating of 1000 VAC at 90°C. Application And Operating Information PERFORMANCE • Lamp Starting Dependability Fluorescent lamps are inherently more difficult to start at low temperatures. All ballasts have limitations as to their ability to start lamps at low ambient temperatures. In this catalog, the low starting point for each lamp/ballast combination appears in the column marked “Minimum Starting Temperature.” Universal four lamp instant start ballasts can operate at a minimum starting temperature down to -18°C (0°F) under the following conditions: 1. Lead lengths to the lamps are those supplied, by Universal, with the ballast or shorter. 2. The distance from the lamp to the ground plane is no greater than 3/4”. 3. The line voltage supplied to the ballast is no less than rated nominal. 4. The ballast or lamps are not remotely mounted. 5. The lamps have been burned in per lamp manufacturer requirements (typically 100 hours). The lamp manufacturer should be contacted for lamp operating characteristics and requirements below 15°C (50°F). • Light Output Optimum light output from fluorescent lamps is achieved when the lamp wall is at 100-110°F. Any substantial excursion (either colder or warmer) will result in a reduction in light output. • Ballast Life A fluorescent lamp ballast, like any other electrical device, generates heat during its normal operation. Ballast temperatures should be kept as low as possible. Maximum dissipation of heat through fixture design and proper ballast installation will help. Although excessive temperature may not cause the ballast to fail immediately, it can shorten ballast life. To assure maximum life, the ballast case temperature should not exceed 75˚C, in a maximum ambient (fixture cavity) of 40˚C. Causes of ballast overheating: • Incorrect line voltage or frequency • Incorrect size, type or number of lamps • Incorrect wiring • Poor heat dissipation due to surrounding insulation • Sealed (Vapor Tight) Fixtures - Unusual heat build-up due to lack of ventilation in fixtures may cause thermal (on/off) cycling of certain ballasts. Consult Universal for specific recommendations. Fluorescent-Electronic RECOMMENDATIONS... • Selection of a proper ballast to match the requirements of the lamp, fixture, voltage and installation. • Mounting of ballast within the fixture with as much surface contact as possible between the ballast and metal portions of the fixture. Secure mounting will aid in proper heat dissipation and can minimize the potential for ballast hum. • The use of heat-conducting dissipators (radiators), if necessary, which increase surface contact between the ballast and fixture. • If necessary, locate the ballast in a remote, cooler area outside the fixture. • Consult Universal for remote mounting recommendations. • Starting Method Legend IS = Instant Start PS = Programmed Start RS = Rapid Start PAR-IS = Parallel Instant Start PAR-PS = Parallel Programmed Start PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start PAGE 1-6 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Specifications TYPICAL SPECIFICATIONS FOR T8 INSTANT START BALLASTS: – HP (High Performance Normal Ballast Factor) – EL (High Efficiency Low Ballast Factor) – HE (High Efficiency Normal Ballast Factor) – HEH (High Efficiency High Ballast Factor) • Ballasts shall include 18AWG solid copper leads color coded in compliance with ANSI C82.11-2011. • Ballasts shall be instant start and provide starting sequence consistent with ANSI standard C82.11-2011. • Ballasts (1-4 lamps) shall operate as Parallel Circuit, allowing remaining lamp(s) to maintain full light output if one or more lamps fail. • Ballasts shall operate from 50/60 Hz input source of 120 through 277 Volts, and sustained variations of ± 10% (Voltage & Frequency) with no damage to the ballasts. • Ballasts shall be a high frequency electronic type, and operate lamps at a frequency above 42 kHz to minimize interference with infrared control systems. • Ballasts shall tolerate operation in ambient temperatures up to 105°F (40°C) without damage. • Ballasts shall have a minimum starting temperature of 0°F (-18°C) for the primary lamp application. • Ballasts shall have a maximum case temperature test point of 75°C printed on the label for easy fixture testing and trouble shooting. • Ballasts shall support 18’ maximum lead length remote mounting for the primary lamp. • Ballasts shall comply with FCC Part 18 Non-Consumer Equipment for EMI (power line conducted) and RFI (Radiated). • Ballasts shall provide transient immunity as recommended by ANSI C82.11-2011. • Ballasts shall auto-restrike allowing replacement of lamps without cycling power. • Ballasts shall incorporate Anti-Striation Circuitry for stable operation of reduced wattage lamps. • Ballasts shall operate lamps with no visible flicker (<3% flicker index). • Ballasts shall tolerate sustained open circuit and short circuit output conditions without damage. • Ballasts shall be Underwriters Laboratory (UL 935) listed, Class P, Type 1 Outdoor and/or CSA certified for both US and Canadian application. • Ballasts shall meet NEMA Premium/CEE High Performance for high efficiency operation. • Ballasts shall be quiet Class A sound rating. • Ballasts shall have a Ballast Factor for the primary lamp application of greater than .77 for EL, .85 for HE and 1.15 for HEH, per ANSI C82.11-2011. • Input current Total Harmonic Distortion shall not exceed 10% for the primary lamp. • Lamp Current Crest Factor (ratio of peak to RMS current) shall be 1.7 or less in accordance with lamp manufacturer recommendation and ANSI C82.11-2011. • The ballasts shall not have any PCB’s. • The manufacturer shall provide written warranty against defects in material or workmanship, including replacement, for five years from date of manufacture. • Manufacturer shall have been manufacturing electronic ballasts for at least thirty years. • Ballasts shall be manufactured in an ISO 9001/ISO 9002 certified facility in North America. • Ballasts shall be Universal Lighting Technologies Bx32IUNVHP-N (x=1or 2) or Bx32IUNVHP-A (x= 3or 4) depending upon the quantity of lamps per fixture. PAGE 1-7 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic • Ballasts shall have a Power Factor greater than .98 for primary lamp. Specifications TYPICAL SPECIFICATIONS FOR T8 PROGRAMMED START BALLASTS: – EL (High Efficiency Low Ballast Factor) – HE (High Efficiency Normal Ballast Factor) – HEH (High Efficiency High Ballast Factor) • Ballasts shall include 18AWG solid copper leads color coded in compliance with ANSI C82.11-2011. • Ballasts shall be Programmed Start with arc current established in less than 700 milliseconds after power is applied. • Ballasts (2-4 lamps) shall operate as a Parallel Circuit, allowing remaining lamp(s) to maintain full light output if one or more lamps fail. • Ballasts shall have a minimum Rh/Rc of 4.25 each time the lamps are started. • Ballasts shall have a maximum ionization current (Glow Current) of 10 milliamps during preheating interval. • Ballasts shall operate from a 50/60 Hz input source of 120 through 277 Volts, and sustained variations of ± 10% (Voltage & Frequency) with no damage to the ballasts. • Ballasts shall be a high frequency electronic type, and operate lamps at a frequency above 42 kHz to minimize interference with infrared control systems. • EL and HE ballasts shall tolerate operation in ambient temperatures up to 105°F (40°C) without damage. In addition, HEH ballasts shall operate up to a 194°F (90°C) maximum case temperature. • Ballasts shall have a maximum case temperature test point printed on the label for easy fixture testing and trouble shooting. • Ballasts shall have a minimum starting temperature of -20°F (-29°C) for the primary lamp application when not remote mounted. • Ballasts shall support 20’ maximum lead length remote mounting for the primary lamp. • Ballasts shall comply with FCC Part 18 Non-Consumer Equipment for EMI (power line conducted) and RFI (Radiated). • Ballasts shall provide transient immunity as recommended by ANSI C82.11-2011. • Ballasts shall auto-restrike allowing replacement of lamps without cycling power. • Ballasts shall incorporate Anti-Striation Circuitry for stable operation of reduced wattage lamps. • Ballasts shall operate lamps with no visible flicker (<3% flicker index). • Ballasts shall tolerate sustained open circuit and short circuit output conditions without damage. • Ballasts shall be Underwriters Laboratory (UL 935) listed, Class P, Type 1 Outdoor and/or CSA certified for both US and Canadian application. • Ballasts shall meet NEMA Premium/CEE High Performance for high efficiency operation. • Ballasts shall be quiet Class A sound rating. Fluorescent-Electronic • Ballasts shall have a Ballast Factor for the primary lamp application of greater than .71 for EL, .88 for HE, and 1.15 for HEH, per ANSI C82.11-2011. • Input current Total Harmonic Distortion shall not exceed 10% for the primary lamp application. • Ballasts shall have a Power Factor greater than 0.98, for the primary lamp application. • Lamp Current Crest Factor (ratio of peak to RMS current) shall be 1.7 or less in accordance with lamp manufacturer recommendation and ANSI C82.11-2011. • The ballasts shall not have any PCB’s. • The manufacturer shall provide written warranty against defects in material or workmanship, including replacement, for five years from date of manufacture. In addition, HEH models shall carry a three year warranty when operated at 194°F (90°C) maximum case temperature. • Manufacturer shall have been manufacturing electronic ballasts for at least thirty years. • Ballasts shall be manufactured in an ISO 9001/ISO 9002 Certified Facility in North America. • Ballasts shall be RoHS compliant. • Ballasts shall be Universal Lighting Technologies ULTim8 Programmed Start Product B232PUNVEL-B, B332PUNVEL-A, B432PUNVEL-A, B232PUNVHE-B, B332PUNVHE-A, B432PUNVHE-A, B232PUNVHEH-A, B332PUNVHEH-A, or B432PUNVHEH-E. PAGE 1-8 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Specifications TYPICAL SPECIFICATIONS FOR T5 & T5HO BALLASTS: • Ballasts shall include 18AWG solid copper leads color coded in compliance with ANSI C82.11-2011 or shall use wire trap terminals for ease of installation. • Ballasts shall be Programmed Start. • Ballasts shall operate from a 50/60 Hz input source of 120 through 277 Volts, and sustained variations of ± 10% (Voltage & Frequency) with no damage to the ballasts. • Ballasts shall be a high frequency electronic type, and operate lamps at a frequency above 42 kHz to minimize interference with infrared control systems. • Ballasts shall tolerate operation in ambient temperatures up to 105°F (40°C) without damage. HB ballasts shall operate up to 194°F (90°C) maximum case temperature. • Ballasts shall have a minimum starting temperature of 0°F (-18°C) for the primary lamp application. T5HO ballasts shall have a minimum starting temperature of -20°F (-29°C) for the primary lamp application when not remote mounted. • Ballasts shall support 20’ lead length remote mounting for the primary lamp. • Ballasts shall comply with FCC Part 18 Non-Consumer Equipment for EMI (power line conducted) and RFI (radiated). • Ballasts shall provide transient immunity recommended by ANSI C82.11-2011. • Ballasts shall incorporate lamp shutdown circuitry for end of lamp life protection. • Ballasts shall auto-restrike to allow for re-lamping without the need to cycle power. • Ballasts shall operate lamps with no visible flicker (<3% flicker index). • Ballasts shall tolerate sustained open and short circuit output conditions without damage. • Ballasts shall be Underwriters Laboratory (UL 935) listed, Class P, Type 1 Outdoor, and/or CSA certified for both US and Canadian application. • Ballasts shall be quiet Class A sound rating. • Ballasts shall have a Ballast Factor for the primary lamp application greater than .95 per ANSI C82.11-2011. Exceptions are ballasts that specify BF in part number, such as B228PUNV85-D, B228PUNV90-C and B228PUNV115-D. • Input current Total Harmonic Distortion shall not exceed 10% for the primary lamp. • Ballasts shall have a Power Factor greater than .98 for the primary lamp application. • Lamp Current Crest Factor (ratio of peak to RMS current) shall be 1.7 or less in accordance with lamp manufacturer recommendation and ANSI C82.11-2011. • The ballasts shall not have any PCB’s. • The manufacturer shall provide written warranty against defects in material or workmanship, including replacement, for five years from date of manufacture. In addition, HB ballasts shall carry a three year warranty at a maximum case temperature of 194°F (90°C). Fluorescent-Electronic • Manufacturer shall have been manufacturing electronic ballasts for at least thirty years. • Ballasts shall be manufactured in an ISO 9001 / ISO 9002 Certified Facility in North America. • Ballast shall be Universal Lighting Technologies Accustart5. PAGE 1-9 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Specifications TYPICAL SPECIFICATIONS FOR ELECTRONIC COMPACT FLUORESCENT BALLASTS: • Ballasts shall be constructed of metal housing to meet plenum and construction code requirements while providing maximum heat transfer without extra grounding wires for extended ballast life. • Ballasts shall be constructed using dual entry color coded wire trap terminals for wiring accuracy and ease of installation. • Ballasts shall be Programmed Start. • Ballasts shall have a minimum Rh/Rc of 4.25 each time the lamps are started. • Ballasts shall have a maximum ionization current (Glow Current) of 25 milliamps during preheating interval. • Ballasts shall operate from 50/60 Hz input source of 120 through 277 Volts, and sustained variations of ± 10% (Voltage & Frequency) with no damage to the ballasts. • Ballasts shall be a high frequency electronic type, and operate lamps at a frequency above 50 kHz to minimize interference with infrared control systems. • Ballasts shall have a minimum starting temperature of 0°F (-18°C) for the primary lamp application. • Ballasts shall tolerate operation in ambient temperatures up to 140°F (55°C) without damage. • Ballasts shall have a maximum case temperature test point of 75°C printed on the label for easy fixture testing and trouble shooting. • Ballasts shall support 12’ lead length remote mounting for the primary lamp. • Ballasts shall comply with FCC Part 18 Non-Consumer Equipment for EMI (power line conducted) and RFI (radiated). • Ballasts shall provide transient immunity as recommended by ANSI C82.11-2011. • Ballasts shall incorporate end of lamp life shutdown circuitry for end of lamp life protection. • Ballasts shall allow for re-lamping without the need to cycle power. • Ballasts shall operate lamps with no visible flicker (<3% flicker index). • Ballasts shall tolerate sustained open and short circuit output conditions without damage. • Ballasts shall be Underwriters Laboratory (UL 935) listed, Class P, Type 1 Outdoor and/or CSA certified for both US and Canadian application. • Ballasts shall be UL 935 Type CC rated to reduce arcing caused by loose connections or improper lamp-pin to lampholder contact. • Ballasts shall be UL 2043 certified for use in plenums and marked on label as “Suitable for Air Handling Spaces”. • Ballasts shall be quiet Class A sound rating. • Ballasts shall have a Ballast Factor for primary lamp application greater than .95 per ANSI C82.11-2011. Fluorescent-Electronic • Input current Total Harmonic Distortion shall not exceed 10% for the primary lamp. • Ballasts shall have a Power Factor greater than .98 for the primary lamp application. • Lamp Current Crest Factor (ratio of peak to RMS current) shall be 1.7 or less in accordance with lamp manufacturer recommendation and ANSI C82.11-2011. • The ballasts shall not have any PCB’s. • The manufacturer shall provide written warranty against defects in material or workmanship, including replacement, for five years from date of manufacture. • Manufacturer shall have been manufacturing electronic ballasts for at least thirty years. • Ballasts shall be manufactured in an ISO 9001 / ISO 9002 Certified Facility in North America. • Ballasts shall be manufactured by Universal Lighting Technologies. PAGE 1-10 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Notes Fluorescent-Electronic Page 1-11 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Electronic Ballast Applications Remote Mounting LAMP LAMP BALLAST Ballast output leads are run through conduit to fixture LAMP FIXTURE Configuration is applicable to 1, 2 and 4-lamp fixtures as well. Through Wiring FIXTURE LAMP LAMP LAMP Ballast output leads are run through the fixture to each lamp, NOT through conduit. Minimize lead lengths by mounting ballast at the center of the fixture when possible. Configuration is applicable to 2 and 3-lamp fixtures as well. Tandem Wiring 2-Ballast Configuration LAMP BALLAST A LAMP BALLAST A BALLAST A LAMP BALLAST B LAMP BALLAST B Fluorescent-Electronic BALLAST B LAMP BALLAST A FIXTURE 1 Output leads from Ballast A and B are run through conduit to second fixture LAMP BALLAST A FIXTURE 2 1-Ballast Configuration BALLAST LAMP FIXTURE 1 LAMP Output lead wire runs through conduit to second fixture PAGE 1-12 FIXTURE 2 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS FOR (1) & (2) F17T8 LAMP F17T8 • Low Profile Designs Featured • Instant & Programmed Rapid Starting Options • 1-2 Lamp Applications * For Residential Use Only Lamp Manufacturers for applications with Ballast Factor > 1.20 2 Consult Universal for Availability 1 Consult IS = Instant Start PS = Programmed Start RS = Rapid Start PAR-IS = Parallel Instant Start STARTING METHOD LEGEND PAR-PS = Parallel Programmed Start SER-PS = Series Programmed Start PAGE 1-13 See page 1-18 for Dimensions and Wiring Diagrams PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start SER-IS = Series Instant Start FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F11T8 - One Lamp Application 120 B132IUNVHE-N 0.09 11 > .99 0.90 8.18 < 10 0/-18 3a -N 1 IS 120 B232IUNVHP-N 0.12 14 > .99 0.90 6.43 < 10 0/-18 3a -N F11T8 - Two Lamp Application 120 0.17 20 > .99 3.90 < 10 2 PAR-IS B232IUNVHP-N 0.78 0/-18 3 -N 277 0.08 21 > .96 3.71 < 15 F15T8 - One Lamp Application 120 B132IUNVHE-N 0.11 14 > .99 0.90 6.43 < 10 0/-18 3a -N 1 IS 120 B232IUNVHP-N 0.14 16 > .99 1.02 6.38 < 10 0/-18 3a -N F15T8 - Two Lamp Application 120 0.21 > .99 3.51 2 PAR-IS B232IUNVHP-N 25 0.86 < 10 0/-18 3 -N 277 0.09 > .98 3.50 F17T8 - One Lamp Application 120 B232I120RES-A* 0.35 21 > .50 1.08 5.14 < 150 0/-18 3a -A 120 B232I120RES-G* 0.34 22 > .50 1.08 4.91 < 150 0/-18 3a -G 347 B132I347HP 0.05 18 > .95 0.92 5.11 < 15 0/-18 1 ST 120 0.17 > .98 B232IUNV-C 20 1.04 5.20 < 10 0/-18 21a -C 277 0.08 > .95 120 0.12 > .98 1 IS B132IUNVEL-A2 14 0.78 5.57 < 15 0/-18 1 -A 277 0.06 > .90 120 0.14 > .98 B132IUNVHE-N 16 0.90 5.63 < 10 0/-18 1 -N 277 0.06 > .97 120 0.14 17 5.29 < 10 B132IUNVHP-N >.96 0.90 0/-18 1 -N 277 0.07 18 5.00 < 15 120 0.17 > .99 B232IUNVHP-N 21 1.07 5.10 < 10 0/-18 3a -N 277 0.08 > .96 120 0.15 > .99 < 10 B132PUNVHP-A2 17 0.91 5.35 0/-18 2 -A 277 0.07 > .96 < 15 1 PS 120 0.23 26 > .99 5.29 B232PUNVHEH-A1 1.38 < 10 -20/-29 30 -A 277 0.11 27 > .94 5.17 347 ES1510A 0.05 18 > .97 0.87 4.83 < 10 0/-18 40 ESA F17T8 - Two Lamp Applications 120 B232I120RES-G* 0.49 33 > .50 0.94 2.85 < 140 0/-18 3 -G 120 B232I120RES-A* 0.49 32 > .50 0.94 2.94 < 140 0/-18 3 -A 347 B232I347HP-A 0.09 32 > .95 0.92 2.88 < 10 0/-18 3 -A 347 B232I347HPL 0.09 29 > .98 0.79 2.72 < 10 0/-18 3 ST 120 0.30 > .99 B232IUNV104-A 36 1.04 2.78 < 10 0/-18 3 -A 277 0.15 > .88 120 0.27 2 PAR-IS B232IUNV-C 31 > .98 0.91 2.94 < 10 0/-18 21 -C 277 0.12 120 0.21 25 3.20 B232IUNVEL-A2 > .95 0.80 < 10 0/-18 3 -A 277 0.10 26 3.08 120 TBD TBD TBD B232IUNVEL-N2 TBD TBD TBD TBD TBD TBD 277 TBD TBD TBD 120 0.24 B232IUNVHE-A2 30 > .95 0.90 3.00 < 10 0/-18 3 -A 277 0.12 120 0.26 > .99 B232IUNVHP-N 31 0.89 2.87 < 10 0/-18 3 -N 277 0.11 > .98 120 0.33 41 2.88 B232IUNVHEH-A > .95 1.18 < 10 -20/-29 3 -A 277 0.15 40 2.95 F17T8 • Low Profile Designs Featured • Instant & Programmed Rapid Starting Options TRIAD® ELECTRONIC BALLASTS FOR (3) & (4) F17T8 LAMPS Fluorescent-Electronic • 3-4 Lamp Applications Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F17T8 - Two Lamp Applications 2 SER-PS 347 ES1329 A 0.11 36 > .97 0.87 2.42 < 10 0/-18 37 ESA 120 .22 26 > .99 2.80 B232PUNVEL-B 0.74 < 10 -20/-29 30 -B 277 .11 25 > .92 2.96 120 .25 B232PUNVHE-B 30 > .90 0.90 3.00 < 10 -20/-29 30 -B 277 .12 120 .35 > .99 2.95 2 PAR-PS B232PUNVHEH-A 41 1.20 < 10 -20/-29 30 -A 277 .16 > .97 2.93 120 .38 B332PUNVHEH-A1 46 > .98 1.31 2.85 < 10 -20/-29 30 -A 277 .17 F17T8 - Three Lamp Applications 347 B332I347HP 0.14 48 > .98 0.92 1.92 < 10 0/-18 6 ST 347 B332I347HPL 0.12 43 > .99 0.80 1.85 < 10 0/-18 6 ST 120 0.35 42 > .99 1.95 B332IUNVEL-A 0.82 < 10 0/-18 6 -A 3 PAR-IS 277 0.15 41 > .95 2.00 120 0.39 > .99 B332IUNVHE-A 46 0.92 2.00 < 10 0/-18 6 -A 277 0.17 > .97 120 0.38 > .99 B332IUNVHP-A 45 0.92 2.04 < 10 0/-18 6 -A 277 0.18 > .90 120 B432I120RES-A* 0.72 51 > .50 1.00 1.96 < 135 0/-18 7a -A 120 0.31 > .99 1.99 B332PUNVEL-A 37 .74 < 10 -20/-29 49 -A 277 0.14 > .94 2.01 120 0.37 44 2.05 B332PUNVHE-A > .90 .91 < 10 -20/-29 49 -A 277 0.16 43 2.14 3 PAR-PS 120 0.49 59 2.02 B332PUNVHEH-A > .98 1.19 < 10 -20/-29 49 -A 277 0.22 58 2.04 120 0.47 56 > .99 2.04 B432PUNVHEH-E 1.14 < 10 -20/-29 49 -E 277 0.23 58 > .91 1.97 F17T8 - Four Lamp Applications 120 B432I120RES-A* 0.84 61 > .50 0.92 1.51 < 130 0/-18 7a -A 347 B432I347HP 0.19 62 > .98 0.92 1.48 < 10 0/-18 7a ST 347 B432I347HPL 0.17 56 > .97 0.82 1.46 < 10 0/-18 7 ST 120 0.44 53 > .98 1.49 4 PAR-IS B432IUNVEL-A 0.79 < 10 0/-18 7a -A 277 0.20 52 > .95 1.52 120 0.49 59 > .98 1.53 B432IUNVHE-A 0.90 < 10 0/-18 7a -A 277 0.22 58 > .95 1.55 120 0.49 59 > .98 1.53 B432IUNVHP-A 0.90 < 10 0/-18 7a -A 277 0.22 58 > .90 1.55 120 0.42 50 > .99 1.43 B432PUNVEL-A 0.72 < 10 -20/-29 50 -A 277 0.18 49 > .95 1.47 120 0.49 59 1.52 4 PAR-PS B432PUNVHE-A > .90 0.89 < 10 -20/-29 50 -A 277 0.22 58 1.54 120 0.65 77 > .99 1.19 1.54 B432PUNVHEH-E < 10 -20/-29 50 -E 277 0.30 79 > .95 1.20 1.52 * For Residential Use Only 1 Consult Lamp Manufacturers for applications with Ballast Factor > 1.20 PAGE 1-14 See page 1-18 for Dimensions and Wiring Diagrams FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS • Standard & Low Profile Designs Featured FOR (1) & (2) F25T8 LAMP • Instant & Programmed Rapid Starting Options F17T8F25T8 • 1-2 Lamp Applications Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.07 25 > .95 0.90 3.60 < 10 0/-18 1 ST 0.18 > .98 19 0.78 4.11 <10 0/-18 1 -A 0.09 > .90 0.20 > .99 23 0.89 3.87 <10 0/-18 1 -N 0.09 > .98 0.20 24 >.98 0.88 3.67 < 10 0/-18 1 -N 0.09 0.24 > .99 28 1.05 3.75 < 10 0/-18 3a -N 0.10 > .98 0.43 28 > .50 1.08 3.86 < 150 0/-18 3a -A 0.43 28 > .50 1.08 3.86 < 150 0/-18 3a -G 0.08 26 > .98 0.88 3.38 < 10 0/-18 3a ST 0.24 28 > .98 1.02 3.64 < 10 0/-18 21a -C 0.11 0.07 24 > .97 0.87 3.63 < 10 0/-18 40 ESA 0.31 >.99 3.70 37 1.36 < 10 -20/-29 30 -A 0.14 >.97 3.67 0.20 > .99 24 0.91 3.79 < 10 0/-18 2 -A 0.09 > .98 0.64 46 > .50 0.92 2.00 < 130 0/-18 3 -A 0.64 46 > .50 0.92 2.00 < 140 0/-18 3 -G 0.13 46 > .95 0.89 1.93 < 10 0/-18 3 -A 0.12 41 > .98 0.75 1.83 < 10 0/-18 3 ST 0.37 45 2.00 > .98 0.90 < 10 0/-18 21 -C 0.16 44 2.05 0.43 51 > .99 1.94 1.04 < 10 0/-18 3 -A 0.20 50 > .93 1.98 0.30 36 0.79 2.19 > .95 < 10 0/-18 3 -A 0.14 37 0.80 2.18 TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD TBD 0.36 44 > .95 0.88 2.00 < 10 0/-18 3 -A 0.16 0.37 44 2.05 > .99 0.90 < 10 0/-18 3 -N 0.16 43 2.09 0.51 61 1.93 > .95 1.18 < 10 20/-29 3 -A 0.22 60 1.97 0.14 49 > .97 0.87 1.78 <10 0/-18 37 ESA 0.30 36 > .99 2.06 0.74 <10 -20/-29 30 -B 0.14 35 > .96 2.12 0.35 42 2.14 > .90 0.90 <10 -20/-29 30 -B 0.16 41 2.18 0.50 60 > .99 1.98 1.18 <10 -20/-29 30 -A 0.22 59 > .98 1.99 0.55 66 1.98 > .98 1.31 <10 -20/-29 30 -A 0.24 65 2.00 * For Residential Use Only 1 Consult lamp manufacturer for applications with ballast factor >1.20 2 Consult Universal for availability PAGE 1-15 See page 1-18 for Dimensions and Wiring Diagrams FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic Lamp Starting Line Catalog Qty. Method Volts Number F25T8 - One Lamp Applications 347 B132I347HP 120 B132IUNVEL-A 277 120 1 IS B132IUNVHE-N 277 120 B132IUNVHP-N 277 120 B232IUNVHP-N 277 120 B232I120RES-A* 120 B232I120RES-G* 347 B232I347HPL 120 B232IUNV-C 277 347 ES1510A 120 B232PUNVHEH-A1 1 PS 277 120 B132PUNVHP-A 277 F25T8 - Two Lamp Applications 120 B232I120RES-A* 120 B232I120RES-G* 347 B232I347HP-A 347 B232I347HPL 120 B232IUNV-C 277 120 B232IUNV104-A 2 PAR-IS 277 120 B232IUNVEL-A2 277 120 B232IUNVEL-N2 277 120 B232IUNVHE-A 277 120 B232IUNVHP-N 277 120 B232IUNVHEH-A 277 2 SER-PS 347 ES1329A 120 B232PUNVEL-B 277 120 B232PUNVHE-B 2 PAR-PS 277 120 B232PUNVHEH-A 277 120 B332PUNVHEH-A1 277 F25T8 • Low Profile Designs Featured • Instant & Programmed Rapid Starting Options TRIAD® ELECTRONIC BALLASTS FOR (3) F25T8 LAMPS Fluorescent-Electronic • 3 Lamp Applications Lamp Starting Line Catalog Qty. Method Volts Number F25T8 - Three Lamp Applications 120 B432I120RES-A* 347 B332I347HP 347 B332I347HPL 120 3 PAR-IS B332IUNVEL-A 277 120 B332IUNVHE-A 277 120 B332IUNVHP-A 277 120 B332PUNVEL-A 3 PAR-PS 277 120 B332PUNVHE-A 277 120 B332PUNVHEH-A 277 120 B432PUNVHEH-E 277 * For Residential Use Only Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.96 71 > .50 0.98 1.38 < 130 0/-18 0.20 68 > .99 0.91 1.34 < 10 0/-18 0.17 60 > .99 0.76 1.26 < 10 0/-18 0.49 59 > .99 1.36 0.80 < 10 0/-18 0.22 58 > .97 1.38 0.56 67 > .99 1.34 0.90 < 10 0/-18 0.24 66 > .98 1.36 0.55 66 > .99 1.36 0.90 <10 0/-18 0.25 65 > .90 1.38 0.46 55 > .99 1.34 0.73 <10 -20/-29 0.20 54 > .97 1.36 0.53 63 1.40 > .90 0.89 <10 -20/-29 0.23 62 1.43 0.72 86 1.36 > .98 1.18 <10 -20/-29 0.31 85 1.38 0.69 > .99 1.37 82 1.13 <10 -20/-29 0.31 > .95 1.38 7a 6 6 -A ST ST 6 -A 6 -A 6 -A 49 -A 49 -A 49 -A 49 -E See page 1-18 for Dimensions and Wiring Diagrams PAGE 1-16 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS FOR (3) & (4) F25T8 LAMPS F25T8 • Low Profile Designs Featured • Instant & Programmed Rapid Starting Options • 3-4 Lamp Applications * For Residential Use Only 1 Consult Lamp Manufacturers for applications with Ballast Factor > 1.20 PAGE 1-17 See page 1-18 for Dimensions and Wiring Diagrams FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F25T8 - Four Lamp Applications 120 B432I120RES-A* 1.13 85 > .50 0.90 1.06 < 130 0/-18 7a -A 347 B432I347HPL 0.24 83 > .98 0.78 0.94 < 10 0/-18 7 ST 120 0.72 87 > .99 1.02 B432IUNVHP-A 0.89 < 10 0/-18 7a -A 277 0.32 85 > .95 1.05 4 PAR-IS 347 B432I347HP 0.26 90 > .98 0.90 1.00 < 10 0/-18 7a ST 120 0.65 78 1.00 B432IUNVEL-A > .98 0.78 < 10 0/-18 7a -A 277 0.28 76 1.03 120 0.72 87 > .99 1.02 B432IUNVHE-A 0.89 < 10 0/-18 7a -A 277 0.31 85 > .98 1.05 120 0.61 73 > .99 0.98 B432PUNVEL-A 0.72 <10 -20/-29 50 -A 277 0.27 72 > .97 1.00 4 PAR-PS 120 0.73 87 1.01 B432PUNVHE-A > .90 0.88 <10 -20/-29 50 -A 277 0.31 84 1.04 120 0.94 112 > .99 1.06 B432PUNVHEH-E 1.18 <10 -20/-29 50 -E 277 0.91 108 > .95 1.09 F25T8ES (22W) - One Lamp Applications 120 0.16 > .99 B132IUNVHE-N 19 0.89 4.68 <10 60/16 3a -N 277 0.07 > .98 1 IS 120 0.20 > .99 B232IUNVHP-N 24 1.14 4.74 <10 60/16 3a -N 277 0.09 > .98 F25T8ES (22W) - Two Lamp Applications 0.31 37 2.43 2 IS 120 B232IUNVHP-N > .99 0.89 <10 60/16 3 -N 277 0.13 36 2.46 F17T8 & F25T8 TRIAD® ELECTRONIC BALLASTS FOR F17T8 & F25T8 LAMPS Overall Dimensions Draw # L ST -A -B -C -G -N ESA W 9.50” 9.50” 9.50” 14.25” 9.50” 9.50” 9.50” 2.40” 1.70” 1.50” 1.18” 1.18” 1.30” 1.56” Mounting Dimensions H M X 1.55” 1.18” 1.00” 1.00” 1.00” 1.00” 1.00” 8.89” 8.89” 8.89” 13.75” 8.89” 8.89” 8.88” 1.69” 1.69” 0.88” ------0.78” ST -A, -B, -G, ESA, -N -C Fluorescent-Electronic WIRING DIAGRAMS DIAGRAM 1 Line Black White BALLAST DIAGRAM 2 DIAGRAM 3 DIAGRAM 3a Blue Blue Blue Red LAMP LAMP LAMP For three lamp operation, cap any blue lead, insulate to 600V DIAGRAM 7 DIAGRAM 6 DIAGRAM 7a DIAGRAM 21 DIAGRAM 8 DIAGRAM 21a DIAGRAM 37 For one lamp operation, individually cap blue leads, insulate to 600V DIAGRAM 30 DIAGRAM 40 DIAGRAM 49 DIAGRAM 49 DIAGRAM 5050 DIAGRAM PAGE 1-18 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS FOR (1) F32T8 LAMP F32T8 • Low Profile Designs Featured • Instant & Programmed Rapid Starting Options • 1 Lamp Applications Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.25 30 > .98 0.88 2.93 < 10 0/-18 1 -N 0.11 0.09 31 > .98 0.88 2.84 < 10 0/-18 1 ST 0.22 > .98 25 0.77 3.08 < 10 0/-18 1 -A 0.11 > .95 0.25 28 > .99 0.87 3.11 < 10 0/-18 1 -N 0.11 0.53 35 > .50 1.06 3.03 < 135 0/-18 3 -A 0.53 36 > .50 1.06 2.94 < 150 0/-18 3 -G 0.09 32 > .98 0.91 2.84 < 10 0/-18 3 ST 0.29 35 > .99 2.99 1.04 < 10 0/-18 3 -N 0.13 34 > .98 3.03 0.11 36 > .95 1.05 2.92 < 10 0/-18 3 -A 0.29 35 > .98 1.02 2.91 < 10 0/-18 22 -C 0.13 0.24 30 > .95 0.95 3.17 < 10 0/-18 3 -A 0.11 0.26 31 2.95 > .95 0.91 < 10 0/-18 3 -N 0.11 30 2.98 0.28 33 > .95 1.05 3.18 < 10 0/-18 3 -A 0.13 0.39 47 2.94 > .95 1.38 < 10 -20/-29 3 -A 0.18 46 3.00 0.26 31 > .99 2.84 0.88 < 10 0/-18 2 -A 0.11 30 > .98 2.93 0.09 31 > .97 0.87 2.81 < 10 0/-18 40 ESA 0.29 35 2.90 > .90 1.01 <10 -20/-29 30 -B 0.13 34 2.98 0.24 29 > .99 2.88 0.83 <10 -20/-29 30 -B 0.12 28 > .93 3.02 0.40 47 > .99 1.34 2.86 <10 -20/-29 30 -A 0.18 * For Residential Use Only 1 Consult Lamp Manufacturers for applications with Ballast Factor > 1.20 2 Consult Universal for availability IS = Instant Start PS = Programmed Start RS = Rapid Start PAR-IS = Parallel Instant Start STARTING METHOD LEGEND PAR-PS = Parallel Programmed Start SER-PS = Series Programmed Start PAGE 1-19 See page 1-23 for Dimensions and Wiring Diagrams PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start SER-IS = Series Instant Start FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic Lamp Starting Line Catalog Qty. Method Volts Number F32T8 - One Lamp Applications 120 B132IUNVHP-N 277 347 B132I347HP 120 B132IUNVEL-A 277 120 B132IUNVHE-N 277 120 B232I120RES-A* 120 B232I120RES-G* 1 IS 347 B232I347HPL 120 B232IUNVHP-N 277 347 B232I347HP-A 120 B232IUNV-C 277 120 B232IUNVEL-A2 277 120 B232IUNVEL-N 277 120 B232IUNVHE-A 277 120 B232IUNVHEH-A1 277 120 B132PUNVHP-A 277 347 ES1510A 1 PS 120 B232PUNVHE-B 277 120 B232PUNVEL-B 277 120 B232PUNVHEH-A1 277 F32T8 • Low Profile Designs Featured • Instant & Programmed Rapid Starting Options TRIAD® ELECTRONIC BALLASTS FOR (2) F32T8 LAMPS Fluorescent-Electronic • 2 Lamp Applications Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F32T8 - Two Lamp Applications 120 B232I120RES-A* 0.80 56 > .50 0.88 1.57 < 120 0/-18 3 -A 120 B232I120RES-G* 0.80 56 > .50 0.88 1.57 < 130 0/-18 3 -G 347 B232I347HPL 0.14 50 > .99 0.78 1.56 < 10 0/-18 3 ST 120 0.47 B232IUNVHP-N 55 > .99 0.86 1.58 < 10 0/-18 3 -N 277 0.20 347 B232I347HP-A 0.17 58 > .99 0.88 1.52 < 10 0/-18 3 -A 120 0.48 58 1.52 B232IUNV-C > .98 0.88 < 10 0/-18 21 -C 277 0.20 56 1.57 120 0.54 65 > .99 1.57 B232IUN104-A 1.04 < 10 0/-18 3 -A 277 0.24 64 > .95 1.59 120 0.40 B232IUNVEL-A2 48 > .95 0.77 1.60 < 10 0/-18 3 -A 277 0.17 120 0.42 49 0.77 B232IUNVEL-N > .95 1.60 < 10 0/-18 3 -N 277 0.18 48 0.76 2 PAR-IS 120 0.45 55 1.58 B232IUNVHE-A > .95 0.87 < 10 0/-18 3 -A 277 0.20 54 1.61 120 0.62 74 1.59 B232IUNVHEH-A > .95 1.18 < 10 -20/-29 3 -A 277 0.26 73 1.62 347 0.22 > .97 B332IHRVHB-E1 76 1.22 1.61 < 10 -20/-29 46 -E 480 0.17 > .90 347 B332I347HPL 0.16 56 > .99 0.87 1.55 < 10 0/-18 6 ST 120 0.53 > .99 B332IUNVHP-A 63 0.99 1.57 < 10 0/-18 6 -A 277 0.24 > .95 347 B332I347HP 0.19 66 > .99 0.99 1.50 < 10 0/-18 6 ST 120 0.48 57 > .99 1.56 B332IUNVEL-A 0.89 < 10 0/-18 6 -A 277 0.21 56 > .97 1.59 120 0.53 64 > .99 1.55 B332IUNVHE-A 0.99 < 10 0/-18 6 -A 277 0.23 63 > .98 1.57 * For Residential Use Only 1 Consult Lamp Manufacturers for applications with Ballast Factor > 1.20 2 Consult Universal for availability PAGE 1-20 See page 1-23 for Dimensions and Wiring Diagrams FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS F32T8 • Low Profile Designs Featured • Instant & Programmed Rapid Starting Options FOR (2) & (3) F32T8 LAMPS • 2 & 3 Lamp Applications Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.17 59 > .97 0.87 1.47 <10 0/-18 0.46 55 1.59 > .90 0.88 <10 -20/-29 0.20 54 1.64 0.38 46 > .99 1.56 0.71 <10 -20/-29 0.16 44 > .97 1.60 0.65 77 1.52 > .99 1.17 <10 -20/-29 0.28 76 1.54 0.54 65 1.59 > .90 1.03 <10 -20/-29 0.24 64 1.61 0.44 53 > .99 1.65 0.87 <10 -20/-29 0.20 52 > .96 1.68 0.70 84 1.54 > .99 1.30 <10 -20/-29 0.30 83 1.57 0.32 0.24 0.21 0.71 0.31 0.25 0.61 0.26 0.70 0.30 1.20 0.24 0.77 0.34 0.28 0.67 0.29 0.74 0.32 110 109 75 84 83 88 74 73 83 81 92 83 92 89 92 80 78 89 87 37 ESA 30 -B 30 -B 30 -A 30 -A 30 -A 30 -A > .98 1.07 1.18 < 10 -20/-29 46 -E > .95 1.08 > .99 0.79 1.05 < 10 0/-18 6 ST > .99 1.05 0.88 < 10 0/-18 6 -A > .98 1.06 > .99 0.88 1.00 < 10 0/-18 6 ST > .99 1.04 0.77 < 10 0/-18 6 -A > .98 1.05 > .99 1.05 0.87 < 10 0/-18 6 -A > .98 1.07 > .50 0.96 1.04 < 130 0/-18 7a -A > .98 0.87 1.05 < 10 0/-18 7 ST > .99 1.02 0.94 < 10 0/-18 7a -A > .95 1.06 > .98 0.99 1.08 < 10 0/-18 7a ST > .99 1.08 0.86 < 10 0/-18 7a -A > .98 1.10 > .99 1.06 0.94 < 10 0/-18 7a -A > .98 1.08 * For Residential Use Only 1 Consult lamp manufacturers for applications with Ballast Factor > 1.20 2 Consult Universal for Availability PAGE 1-21 See page 1-23 for Dimensions and Wiring Diagrams FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic Lamp Starting Line Catalog Number Qty. Method Volts F32T8 - Two Lamp Applications 2 SER-PS 347 ES1329A 120 B232PUNVHE-B 277 120 B232PUNVEL-B 277 120 B232PUNVHEH-A 277 2 PAR-PS 120 B332PUNVHE-A 277 120 B332PUNVEL-A 277 120 B332PUNVHEH-A1 277 F32T8 - Three Lamp Applications 3 SER-IS 347 B332IHRVHB-E 480 347 B332I347HPL 120 B332IUNVHP-A 277 347 B332I347HP 120 B332IUNVEL-A 277 120 B332IUNVHE-A 3 PAR-IS 277 120 B432I120RES-A* 347 B432I347HPL 120 B432IUNVHP-A 277 347 B432I347HP 120 B432IUNVEL-A 277 120 B432IUNVHE-A 277 F32T8 • Low Profile Designs Featured TRIAD® ELECTRONIC BALLASTS • Instant & Programmed Rapid Starting Options FOR (3) & (4) F32T8 LAMPS Fluorescent-Electronic • 4 Lamp Applications Lamp Starting Line Catalog Qty. Method Volts Number F32T8 - Three Lamp Applications 120 B332PUNVHE-A 277 120 B332PUNVEL-A 277 120 B332PUNVHEH-A 277 3 PAR-PS 120 B432PUNVHE-A 277 120 B432PUNVEL-A 277 120 B432PUNVHEH-E 277 F32T8 - Four Lamp Applications 120 B432I120RES-A* 347 B432I347HPL 120 4 PAR-IS B432IUNVHP-A 277 347 B432I347HP 120 B432IUNVEL-A 277 120 B432IUNVHE-A 277 120 4 PAR-PS B432PUNVHE-A 277 120 B432PUNVEL-A 277 120 B432PUNVHEH-E 277 Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.70 84 1.05 > .90 0.88 <10 -20/-29 0.30 82 1.07 0.58 70 > .99 1.02 0.71 <10 -20/-29 0.25 69 > .98 1.03 0.93 112 1.03 > .99 1.15 <10 -20/-29 0.40 109 1.06 0.75 90 1.06 > .90 0.95 <10 -20/-29 0.32 87 1.09 0.66 79 > .99 0.97 0.77 <10 -20/-29 0.29 77 > .97 1.00 0.87 103 > .99 1.08 1.12 <10 -20/-29 0.38 102 > .97 1.10 49 -A 49 -A 49 -A 49 -A 49 -A 49 -A 1.40 109 > .50 0.87 0.80 < 130 0/-18 7a 0.29 101 > .99 0.78 0.77 < 10 0/-18 7 0.93 110 > .99 0.80 0.88 < 10 0/-18 7a 0.40 108 > .98 0.81 0.33 114 > .99 0.88 0.77 < 10 0/-18 7a 0.80 97 > .99 0.79 0.77 < 10 0/-18 7a 0.34 96 > .98 0.80 0.91 109 0.80 > .99 0.87 < 10 0/-18 7a 0.38 106 0.82 0.91 109 0.80 > .90 0.87 <10 -20/-29 50 0.39 107 0.82 0.76 91 > .99 0.78 0.71 <10 -20/-29 50 0.33 90 > .98 0.79 1.20 143 > .99 0.81 1.15 <10 -20/-29 50 0.50 141 > .98 0.82 -A ST * For Residential Use Only 2 Consult Universal for Availability IS = Instant Start PS = Programmed Start RS = Rapid Start PAR-IS = Parallel Instant Start -A ST -A -A -A -A -E See page 1-23 for Dimensions and Wiring Diagrams STARTING METHOD LEGEND PAR-PS = Parallel Programmed Start SER-PS = Series Programmed Start PAGE 1-22 PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start SER-IS = Series Instant Start FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS F32T8 FOR F32T8 LAMPS Overall Dimensions Draw # L ST 9.50” -A 9.50” -B 9.50” -C 14.25” -E 16.88” -G 9.50” -N 9.50” ESA 9.50” W Mounting Dimensions H M X 2.40” 1.55” 8.89” 1.69” 1.70” 1.18” 8.89” 1.69” 1.50” 1.00” 8.89” 0.88” 1.18” 1.00” 13.75” --1.74” 1.18” 16.28” --1.18” 1.00” 8.89” --1.30” 1.00” 8.89” --- 1.56” 1.00” 8.88” 0.78” ST -A, -B, -E, -G ESA, -N -C WIRING DIAGRAMS Line Black White BALLAST For one lamp operation, individually cap unused blue lead, insulate to 600V DIAGRAM 2 Blue Blue Blue Red Line Black White Yellow DIAGRAM 3 Blue BALLAST Blue Red Red Yellow LAMP Fluorescent-Electronic DIAGRAM 1 LAMP LAMP LAMP LAMP LAMP LAMP For Two Lamp operation, Insulate one blue lead to 600V For Three Lamp Operation, Insulate one blue lead to 600V For three lamp operation, cap any blue lead, insulate to 600V DIAGRAM 6 DIAGRAM 7 DIAGRAM 7a DIAGRAM 21 DIAGRAM 30 DIAGRAM 22 DIAGRAM 46 DIAGRAM 37 DIAGRAM 40 DIAGRAM 49 DIAGRAM 49 PAGE 1-23 DIAGRAM 50 DIAGRAM 50 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) F32T8ES 30 WATT • High Performance Models and Low Profile Designs TRIAD® ELECTRONIC BALLASTS • Instant and Programmed Rapid Starting Options FOR (1) & (2) F32T8ES(30 WATT) LAMPS Fluorescent-Electronic • 1-2 Lamp Applications Lamp Starting Line Catalog Qty. Method Volts Number F32T8ES(30W) - One Lamp Applications 120 277 B132IUNVEL-A 120 1 IS B132IUNVHE-N 277 120 B132IUNVHP-N 277 347 B232I347HP-A 120 B232IUNVEL-A2 277 120 B232IUNVEL-N 277 120 B232IUNVHE-A 277 120 277 B232IUNVHP-N 120 B232IUNVHEH-A1 277 120 277 B132PUNVHP-A 120 B232PUNVEL-B 1 PS 277 120 B232PUNVHE-B 277 120 B232PUNVHE-B 277 120 B232PUNVHEH-A1 277 F32T8ES(30W) - Two Lamp Applications 347 1 2 SER-IS 480 B332IHRVHB-E 120 277 B332IUNV104-A 120 B232IUNVEL-A2 277 120 B232IUNVEL-N 277 120 B232IUNVHP-N 277 120 2 PAR-IS B232IUNVHE-A 277 120 B232IUNVHEH-A 277 347 B232I347HP-A 120 277 B332IUNVEL-A 120 277 B332IUNVHE-A 120 277 B332IUNVHP-A Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.22 > .98 25 0.77 3.08 < 10 0.11 > .95 0.24 26 > .99 0.87 3.35 < 10 0.10 0.24 28 > .98 0.88 3.14 < 10 0.10 0.10 34 > .98 1.04 3.06 < 10 0.23 28 > .95 0.92 3.92 < 10 0.11 0.24 0.89 3.04 29 > .95 0.88 < 10 0.10 3.08 0.25 > .95 1.05 3.28 < 10 0.12 32 0.27 33 > .99 1.02 3.14 < 10 0.12 32 > .98 1.03 3.21 0.37 43 > .95 1.38 3.21 < 10 0.16 0.23 > .99 28 3.14 < 10 0.10 > .98 0.88 0.23 28 > .99 3.01 0.83 <10 0.12 27 > .93 3.12 0.27 32 3.12 > .90 1.01 <10 0.12 30 3.34 0.27 32 3.12 > .90 1.01 <10 0.12 30 3.34 0.38 47 > .98 1.34 2.85 <10 0.17 0.21 > .97 71 1.22 1.72 < 10 0.16 > .90 0.50 > .99 1.72 61 1.04 < 10 0.23 > .94 1.75 0.38 > .95 0.77 1.67 < 10 0.17 46 0.40 1.57 47 > .95 0.75 < 10 0.17 1.60 0.44 53 1.64 > .99 0.86 < 10 0.19 51 1.69 0.42 52 1.67 > .95 0.87 < 10 0.19 51 1.71 0.59 70 1.69 > .95 1.18 < 10 0.25 68 1.74 0.15 53 > .98 0.88 1.66 < 10 0.46 54 > .99 1.65 0.89 < 10 0.20 53 > .98 1.68 0.49 59 > .99 1.68 0.99 < 10 0.21 57 > .97 1.74 0.50 > .99 59 0.99 1.68 < 10 0.22 > .95 1 Consult lamp manufacturers for applications with Ballast Factor > 1.20 2 Consult Universal for availability PAGE 1-24 60/16 1 -A 60/16 1 -N 60/16 1 -N 60/16 3a -A 60/16 3a -A 60/16 3a -N 60/16 3a -A 60/16 3a -N 60/16 3a -A 60/16 2 -A 60/16 30 -B 60/16 30 -B 60/16 30 -B 60/16 30 -A 60/16 46 -E 60/16 3 -A 60/16 3 -A 60/16 3 -N 60/16 3 -N 60/16 3 -A 60/16 60/16 3 3 -A -A 60/16 6 -A 60/16 6 -A 60/16 6 -A See page 1-31 for Dimensions and Wiring Diagrams FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) F32T8ES TRIAD® ELECTRONIC BALLASTS 30 WATT FOR (2)(cont.), (3) & (4) F32T8ES LAMPS and Wiring Diagrams PAGE 1-25 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F32T8ES(30W) - Two Lamp Applications 120 0.36 43 > .99 1.64 B232PUNVEL-B 0.71 <10 60/16 30 -B 277 0.15 42 > .97 1.71 120 0.42 50 1.75 B232PUNVHE-B > .90 0.88 <10 60/16 30 -B 277 0.18 48 1.82 2 PAR-PS 120 0.61 75 1.68 B232PUNVHEH-A1 > .99 1.26 <10 60/16 30 -A 277 0.26 74 1.70 120 0.41 49 > .99 1.77 B332PUNVEL-A 0.87 <10 60/16 30 -A 277 0.18 48 > .96 1.82 120 0.50 60 1.72 B332PUNVHE-A > .90 1.03 <10 60/16 30 -A 277 0.22 59 1.73 120 0.66 82 1.59 B332PUNVHEH-A1 > .99 1.30 <10 60/16 30 -A 277 0.29 81 1.60 F32T8ES(30W) - Three Lamp Applications 347 0.30 102 > .98 1.16 3 SER-IS B332IHRVHB-E 1.18 < 10 60/16 46 -E 480 0.22 101 > .95 1.17 120 0.58 70 > .99 1.10 B332IUNVEL-A 0.77 < 10 60/16 6 -A 277 0.25 69 > .98 1.12 120 0.65 79 > .99 1.10 B332IUNVHE-A 0.87 < 10 60/16 6 -A 277 0.28 77 > .98 1.13 120 0.66 79 > .99 1.13 3 PAR-IS B332IUNVHP-A 0.89 < 10 60/16 6 -A 277 0.29 77 > .95 1.16 347 B432I347HP 0.26 88 > .98 0.99 1.13 < 10 60/16 7a ST 120 0.62 75 > .99 1.15 B432IUNVEL-A 0.86 < 10 60/16 7a -A 277 0.27 73 > .98 1.18 120 0.70 84 1.14 B432IUNVHE-A > .98 0.96 < 10 60/16 7a -A 277 0.30 82 1.17 120 0.72 86 > .98 1.12 B432IUNVHP-A 0.96 < 10 60/16 7a -A 277 0.32 84 > .95 1.14 120 0.53 64 > .99 1.12 B332PUNVEL-A 0.71 <10 60/16 49 -A 277 0.23 63 > .97 1.13 120 0.89 106 1.08 B332PUNVHEH-A > .99 1.15 <10 60/16 49 -A 277 0.38 104 1.11 120 0.65 78 1.13 B332PUNVHE-A > .90 0.88 <10 60/16 49 -A 277 0.28 76 1.15 3 PAR-PS 120 0.60 72 > .99 1.07 B432PUNVEL-A 0.77 <10 60/16 49 -A 277 0.26 71 > .97 1.09 120 0.74 89 1.07 B432PUNVHE-A > .90 0.95 <10 60/16 49 -A 277 0.31 84 1.13 120 0.84 99 > .99 1.14 B432PUNVHEH-E 1.13 <10 60/16 49 -E 277 0.37 98 > .96 1.15 1 Consult lamp manufacturers for applications with Ballast Factor > 1.20 See page 1-31 for Dimensions F32T8ES (30W -25W) • High Performance Models and Low Profile Designs • 1-2 Lamp Applications Lamp Starting Line Catalog Qty. Method Volts Number Fluorescent-Electronic TRIAD® ELECTRONIC BALLASTS F32T8ES(30W) - Four Lamp Applications 347 B432I347HP 120 B432IUNVEL-A 277 4 PAR-IS 120 B432IUNVHE-A 277 120 B432IUNVHP-A 277 120 B432PUNVEL-A 277 4 PAR-PS 120 B432PUNVHE-A 277 120 B432PUNVHEH-E 277 F32T8ES (25W) - One Lamp Applications 120 B132IUNVEL-A 277 120 1 IS B132IUNVHE-N 277 120 B132IUNVHP-N 277 120 B232IUNVEL-A2 277 120 B232IUNVEL-N 277 120 B232IUNVHE-A 277 120 B232IUNVHP-N 277 120 B232IUNVHEH-A1 277 120 B132PUNVHP-A 277 120 B232PUNVEL-B 277 1 PS 120 B232PUNVHE-B 277 120 B232PUNVHEH-A1 277 F32T8ES (25W) - Two Lamp Applications 347 2 SER-IS B332IHRVHB-E 480 120 B232IUNV104-A 277 120 2 277 B232IUNVEL-A 120 B232IUNVEL-N 277 120 B232IUNVHE-A 277 120 B232IUNVHP-N 277 2 PAR-IS 120 B232IUNVHEH-A 277 120 B332IUNVEL-A 277 120 B332IUNVHE-A 277 120 B332IUNVHP-A 277 FOR (1) & (2) F32T8ES (25 WATT) LAMPS Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.31 106 > .99 0.88 0.83 < 10 0.75 91 > .99 0.85 0.77 < 10 0.32 90 > .98 0.86 0.85 103 > .99 0.84 0.87 < 10 0.36 100 > .98 0.87 0.87 104 > .98 0.85 0.88 < 10 0.38 101 > .95 0.87 0.71 85 > .99 0.83 0.71 <10 0.31 84 > .98 0.84 0.86 103 0.84 > .90 0.87 <10 0.37 101 0.86 1.14 135 > .99 0.87 1.18 <10 0.50 134 > .97 0.88 60/16 7a ST 60/16 7a -A 60/16 7a -A 60/16 7a -A 60/16 50 -A 60/16 50 -A 60/16 50 -E 0.17 > .98 20 0.77 3.85 < 10 60/16 1 0.07 > .95 0.20 23 > .99 0.87 3.78 < 10 60/16 1 0.09 0.20 24 > .98 0.88 3.67 < 10 60/16 1 0.09 0.20 24 > .99 3.96 < 10 0.95 60/16 3a 0.09 25 > .95 3.80 < 15 0.20 > .99 0.84 3.54 < 10 24 60/16 3a 0.09 > .95 0.85 3.55 < 15 0.23 > .98 27 1.05 3.89 < 10 60/16 3a 0.10 > .95 0.22 27 > .99 3.60 0.96 < 10 60/16 3a 0.10 26 > .98 3.64 0.32 38 3.63 > .95 1.38 < 10 60/16 3a 0.14 37 3.73 0.21 25 > .99 0.88 3.52 < 10 60/16 2 0.09 0.20 24 > .99 3.49 0.83 <10 60/16 30 0.11 23 > .92 3.58 0.23 28 3.80 > .90 1.05 <10 60/16 30 0.12 27 3.88 0.33 1.36 3.81 36 > .98 <10 60/16 30 0.14 1.35 3.72 0.18 > .95 61 1.14 1.87 < 10 0.14 > .90 0.42 > .99 1.92 52 1.04 < 10 0.20 > .93 1.82 0.33 39 > .99 1.97 0.77 < 10 0.14 38 > .98 2.03 0.33 39 > .99 0.72 1.83 < 10 0.14 38 > .98 0.71 1.87 0.37 44 1.98 > .98 0.87 < 10 0.16 43 2.02 0.36 43 1.84 > .99 0.78 < 10 0.15 42 1.88 0.49 59 2.00 > .95 1.18 < 10 0.21 58 2.03 0.37 44 > .99 2.02 0.89 < 10 0.16 43 > .95 2.07 0.43 51 > .98 1.94 0.99 < 10 0.19 50 > .95 1.98 0.43 > .98 51 1.00 1.96 < 10 0.20 > .90 1 Consult lamp manufacturers for applications with Ballast Factor > 1.20 PAGE 1-26 -A -N -N -A -N -A -N -A -A -B -B -A 60/16 46 -E 60/16 3 -A 60/16 3 -A 60/16 3 -N 60/16 3 -A 60/16 3 -N 60/16 3 -A 60/16 6 -A 60/16 6 -A 60/16 6 -A See page 1-31 for Dimensions and Wiring Diagrams FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS FOR (3) & (4) F32T8ES (25 WATT) LAMPS Lamp Starting Line Catalog Qty. Method Volts Number 25 WATT • 3-4 Lamp Applications Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.31 37 > .99 1.91 0.71 <10 0.14 35 > .96 2.03 0.36 43 2.04 > .90 0.88 <10 0.16 41 2.14 0.51 59 2.01 > .98 1.18 <10 0.22 58 2.02 0.35 42 > .99 2.07 0.87 <10 0.16 41 > .95 2.13 0.42 50 2.07 > .90 1.04 <10 0.18 48 2.15 0.57 68 > .98 1.30 1.91 <10 0.25 0.26 88 0.19 0.48 58 0.21 57 0.56 66 0.24 65 0.57 69 0.26 68 0.50 60 0.22 58 0.60 72 0.26 71 0.61 73 0.27 72 > .97 1.11 1.26 < 10 > .90 > .99 1.33 0.77 < 10 > .97 1.35 > .98 1.32 0.87 < 10 > .95 1.34 > .99 1.30 0.90 < 10 > .95 1.32 > .99 1.43 0.86 < 10 > .94 1.48 > .99 1.33 0.96 < 10 > .95 1.35 > .98 1.33 0.97 < 10 > .95 1.35 60/16 30 -B 60/16 30 -B 60/16 30 -A 60/16 30 -A 60/16 30 -A 60/16 30 -A 60/16 46 -E 60/16 6 -A 60/16 6 -A 60/16 6 -A 60/16 7a -A 60/16 7a -A 60/16 7a -A See page 1-31 for Dimensions and Wiring Diagrams PAGE 1-27 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic F32T8ES (25W) - Two Lamp Applications 120 B232PUNVEL-B 277 120 B232PUNVHE-B 277 120 B232PUNVHEH-A 277 2 PAR-PS 120 B332PUNVEL-A 277 120 B332PUNVHE-A 277 120 B332PUNVHEH-A1 277 F32T8ES (25W) - Three Lamp Applications 347 3 SER-IS B332IHRVHB-E 480 120 B332IUNVEL-A 277 120 B332IUNVHE-A 277 3 PAR-IS 120 B332IUNVHP-A 277 120 B432IUNVEL-A 277 120 B432IUNVHE-A 277 120 B432IUNVHP-A 277 F32T8ES • High Performance Models and Low Profile Designs F32T8ES • High Performance Models and Low Profile Designs 25 WATT • 1-2 Lamp Applications Lamp Starting Line Catalog Qty. Method Volts Number Fluorescent-Electronic TRIAD® ELECTRONIC BALLASTS Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F32T8ES (25W) - Three Lamp Applications 120 B332PUNVEL-A 277 120 B332PUNVHE-A 277 3 PAR-PS 120 B332PUNVHEH-A 277 120 B432PUNVEL-A 277 120 B432PUNVHE-A 277 120 B432PUNVHEH-E 277 F32T8ES (25W) - Four Lamp Applications 120 B432IUNVEL-A 277 120 B432IUNVHE-A 277 4 PAR-IS 120 B432IUNVHP-A 277 120 B432PUNVEL-A 277 4 PAR-PS 120 B432PUNVHE-A 277 120 B432PUNVHEH-E 277 IS = Instant Start PS = Programmed Start RS = Rapid Start PAR-IS = Parallel Instant Start FOR (1) & (2) F32T8ES (25 WATT) LAMPS 0.46 55 > .99 1.30 0.71 <10 0.20 54 > .97 1.32 0.55 66 1.34 > .90 0.88 <10 0.24 65 1.35 0.75 90 1.28 > .98 1.15 <10 0.32 88 1.31 0.52 62 > .99 1.23 0.77 <10 0.23 61 > .96 1.26 0.59 71 > .90 0.95 1.35 <10 0.26 70 0.76 90 > .99 1.26 1.13 <10 0.35 92 > .95 1.23 60/16 49 -A 60/16 49 -A 60/16 49 -A 60/16 49 -A 60/16 49 -A 60/16 49 -E 0.62 75 > .99 1.09 0.82 <10 60/16 7a -A 0.27 73 > .95 1.12 0.73 87 > .99 1.00 0.87 <10 60/16 7a -A 0.31 85 > .98 1.02 0.74 90 > .98 0.99 0.89 < 10 60/16 7a -A 0.33 88 > .95 1.01 0.61 73 > .99 0.97 0.71 <10 60/16 50 -A 0.27 72 > .97 0.98 0.71 85 1.02 > .90 0.87 <10 60/16 50 -A 0.31 84 1.03 1.04 124 > .99 0.96 1.18 <10 60/16 50 -E 0.45 118 > .95 1.00 See page 1-31 for Dimensions and Wiring Diagrams STARTING METHOD LEGEND PAR-PS = Parallel Programmed Start SER-PS = Series Programmed Start PAGE 1-28 PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start SER-IS = Series Instant Start FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS FOR (1) & (2) F28T8 LAMPS • High Performance Models and Low Profile Designs F28T8 • Instant and Programmed Rapid Starting Options • 1-2 Lamp Applications Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.20 > .98 21 0.77 3.67 < 10 0.10 > .95 0.20 24 > .99 0.87 3.63 < 10 0.10 0.22 26 > .98 0.88 3.38 < 10 0.10 0.09 32 > .98 1.04 3.25 < 10 0.22 26 3.65 > .95 0.95 < 10 0.10 27 3.52 0.23 27 3.30 > .95 0.88 < 10 0.10 26 3.31 0.24 29 > .95 1.10 3.79 < 10 0.11 0.33 40 3.45 > .95 1.38 < 10 0.15 39 3.54 0.25 30 > .99 0.99 3.36 < 10 0.11 29 > .98 1.00 3.40 0.28 27 > .99 0.88 3.26 < 10 0.11 0.21 25 > .99 3.33 0.83 <10 0.11 24 > .92 3.46 0.25 30 3.41 > .90 1.01 <10 0.12 29 3.45 0.35 3.47 39 > .97 1.35 <10 0.15 3.44 0.19 > .97 65 1.22 1.88 < 10 0.15 > .90 0.14 50 > .98 0.88 1.76 < 10 0.47 56 > .99 1.79 1.04 < 10 0.21 55 > .94 1.82 0.36 43 > .95 0.77 1.79 < 10 0.15 0.36 43 0.75 > .95 1.76 < 10 0.15 42 0.74 0.40 49 1.78 > .95 0.87 < 10 0.18 48 1.81 0.40 48 1.76 > .99 0.83 < 10 0.17 46 1.78 0.53 64 1.84 > .95 1.18 < 10 0.23 62 1.90 0.41 49 > .99 1.82 0.89 < 10 0.18 48 > .95 1.85 0.45 54 > .99 1.83 0.99 < 10 0.19 53 > .97 1.87 0.46 55 > .99 1.80 0.99 < 10 0.21 54 > .90 1.83 1 Consult lamp manufacturers for applications with Ballast Factors > 1.20 2 Consult Universal for availability PAGE 1-29 60/16 1 -A 60/16 1 -N 60/16 1 -N 60/16 3a 60/16 3a -A -A 60/16 3a -N 60/16 3a -A 60/16 3a -A 60/16 3a -N 60/16 2 -A 60/16 30 -B 60/16 30 -B 60/16 30 -A 60/16 46 -E 60/16 3 -A 60/16 3 -A 60/16 3 -A 60/16 3 -N 60/16 3 -A 60/16 3 -N 60/16 3 -A 60/16 6 -A 60/16 6 -A 60/16 6 -A See page 1-31 for Dimensions and Wiring Diagrams FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic Lamp Starting Line Catalog Qty. Method Volts Number F28T8 - One Lamp Applications 120 B132IUNVEL-A 277 120 1 IS B132IUNVHE-N 277 120 B132IUNVHP-N 277 347 B232I347HP-A 120 B232IUNVEL-A2 277 120 B232IUNVEL-N 277 120 B232IUNVHE-A 277 120 B232IUNVHEH-A1 277 120 B232IUNVHP-N 277 120 B132PUNVHP-A 277 120 B232PUNVEL-B 277 1 PS 120 B232PUNVHE-B 277 120 B232PUNVHEH-A1 277 F28T8 - Two Lamp Applications 347 2 SER-IS B332IHRVHB-E1 480 347 B232I347HP-A 120 B232IUNV104-A 277 120 B232IUNVEL-A2 277 120 B232IUNVEL-N 277 2 PAR-IS 120 B232IUNVHE-A 277 120 B232IUNVHP-N 277 120 B232IUNVHEH-A 277 120 B332IUNVEL-A 277 120 B332IUNVHE-A 277 120 B332IUNVHP-A 277 F28T8 • High Performance Models and Low Profile Designs • Instant and Programmed Rapid Starting Options TRIAD® ELECTRONIC BALLASTS FOR (2)(cont.), (3) & (4) F28T8 LAMPS Fluorescent-Electronic • 2-4 Lamp Applications Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F28T8 - Two Lamp Applications 120 0.33 40 > .99 1.79 B232PUNVEL-B 0.71 <10 60/16 30 -B 277 0.15 39 > .96 1.84 120 0.39 46 1.90 B232PUNVHE-B > .90 0.88 <10 60/16 30 -B 277 0.17 45 1.95 120 0.56 64 1.85 B232PUNVHEH-A > .99 1.18 <10 60/16 30 -A 277 0.24 63 1.86 2 PAR-PS 120 0.45 54 1.93 B332PUNVHE-A > .90 1.04 <10 60/16 30 -A 277 0.20 53 1.97 120 0.38 46 > .99 1.91 B332PUNVEL-A 0.87 <10 60/16 30 -A 277 0.17 45 > .96 1.92 120 0.60 72 1.81 B332PUNHEH-A1 > .98 1.30 <10 60/16 30 -A 277 0.26 71 1.83 F28T8 - Three Lamp Applications 347 0.28 > .97 3 SER-IS B332IHRVHB-E 94 1.18 1.26 < 10 60/16 46 -E 480 0.21 > .90 120 0.53 66 > .99 1.17 B332IUNVEL-A 0.77 < 10 60/16 6 -A 277 0.23 65 > .97 1.18 120 0.60 75 > .99 1.16 B332IUNVHE-A 0.87 < 10 60/16 6 -A 277 0.26 73 > .98 1.19 120 0.61 73 > .99 1.22 B332IUNVHP-A 0.89 < 10 60/16 6 -A 277 0.27 71 > .95 1.25 3 PAR-IS 347 B432I347HP 0.23 78 > .98 0.99 1.27 < 10 60/16 7a ST 120 0.57 69 > .99 1.25 B432IUNVEL-A 0.86 < 10 60/16 7a -A 277 0.26 68 > .95 1.26 120 0.64 77 > .99 1.25 B432IUNVHE-A 0.96 < 10 60/16 7a -A 277 0.28 75 > .98 1.28 120 0.66 79 > .98 0.97 1.23 B432IUNVHP-A < 10 60/16 7a -A 277 0.29 77 > .95 0.97 1.26 120 0.49 59 > .99 1.21 B332PUNVEL-A 0.71 <10 60/16 49 -A 277 0.21 58 > .97 1.22 120 0.59 71 1.25 B332PUNVHE-A > .90 0.88 <10 60/16 49 -A 277 0.25 68 1.29 120 0.79 94 1.22 B332PUNVHEH-A > .98 1.15 <10 60/16 49 -A 277 0.34 92 1.25 3 PAR-PS 0.56 67 > .99 1.15 120 B432PUNVEL-A 0.77 <10 60/16 49 -A 277 0.25 66 > .97 1.17 120 0.64 77 1.24 B432PUNVHE-A > .90 0.95 <10 60/16 49 -A 277 0.28 76 1.25 120 0.76 > .99 B432PUNVHEH-E 90 1.13 1.25 <10 60/16 49 -E 277 0.34 > .96 1 Consult lamp manufacturers for applications with Ballast Factors > 1.20 See page 1-31 for Dimensions and Wiring Diagrams PAGE 1-30 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS F28T8 FOR F32T8ES AND F28T8 LAMPS Overall Dimensions Draw # L ST -A -B -E -N 9.50” 9.50” 9.50” 16.88” 9.50” W 2.40” 1.70” 1.50” 1.74” 1.30” Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.28 95 > .98 0.88 0.93 < 10 0.70 85 > .99 0.91 0.77 < 10 0.31 84 > .98 0.92 0.77 97 > .99 0.90 0.87 < 10 0.33 94 > .98 0.93 0.80 96 > .98 0.89 0.93 < 10 0.35 93 > .95 0.88 0.95 0.64 77 > .99 0.92 0.71 <10 0.28 76 > .97 0.93 0.77 92 0.94 > .90 0.87 <10 0.33 90 0.97 1.05 > .99 0.95 125 1.18 <10 0.46 > .98 0.94 60/16 7a ST 60/16 7a -A 60/16 7a -A 60/16 7a -A 60/16 50 -A 60/16 50 -A 60/16 50 -E Mounting Dimensions H M X 1.55” 1.18” 1.00” 1.18” 1.00” 8.89” 8.89” 8.89” 16.28” 8.89” 1.69” 1.69” 1.69” --1.69” -A, -B, -E, -N ST WIRING DIAGRAMS DIAGRAM 1 Line Black White BALLAST DIAGRAM 2 DIAGRAM 3 DIAGRAM 3a Blue Blue Blue Red LAMP LAMP LAMP For Two Lamp operation, Insulate one blue lead to 600V DIAGRAM 6 DIAGRAM 46 For three lamp operation, cap any blue lead, insulate to 600V For Three Lamp Application, Individually cap brown leads, Insulate to 600V For one lamp operation, cap any blue lead, insulate to 600V DIAGRAM 8 DIAGRAM 30 DIAGRAM 7a DIAGRAM 49 DIAGRAM 49 DIAGRAM 5050 DIAGRAM PAGE 1-31 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic Lamp Starting Line Catalog Qty. Method Volts Number F28T8 - Four Lamp Applications 347 B432I347HP 120 B432IUNVEL-A 277 4 PAR-IS 120 B432IUNVHE-A 277 120 B432IUNVHP-A 277 4 PAR-PS 120 B432PUNVEL-A 277 120 B432PUNVHE-A 277 120 B432PUNVHEH-E 277 F40T8 • Low Profile Designs Featured • Instant & Programmed Rapid Starting Options TRIAD® ELECTRONIC BALLASTS FOR (1), (2), AND (3) F40T8 LAMPS Fluorescent-Electronic • 1-3 Lamp Applications Lamp Starting Line Catalog Qty. Method Volts Number F40T8 - One Lamp Applications 120 B132IUNVEL-A 277 120 B132IUNVHE-N 277 120 B132IUNVHP-N 277 347 B232I347HP-A 1 IS 347 B232I347HPL 120 B232IUNVHP-N 277 347 B232I347RH-A 120 B232IUNV-C 277 120 B232PUNVEL-B 277 1 PS 120 B232PUNVHE-B 277 F40T8 - Two Lamp Applications 347 B259I347HP 347 B332I347HPL 120 B332IUNVEL-A 2 PAR-IS 277 120 B332IUNVHE-A 277 120 B332IUNVHP-A 277 120 B332PUNVEL-A 277 2 PAR-PS 120 B332PUNVHE-A 277 Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.25 > .98 32 0.76 2.38 < 10 0/-18 1 -A 0.13 > .95 0.30 35 > .99 0.86 2.46 < 10 0/-18 1 -N 0.14 0.31 37 2.32 > .99 0.86 < 10 32/0 1 -N 0.13 36 2.39 0.13 45 > .98 1.02 2.27 <10 0/-18 3a -A 0.11 38 > .98 0.86 2.26 < 10 0/-18 3a ST 0.36 44 2.34 > .99 1.03 < 10 32/0 3a -N 0.16 43 2.40 0.13 45 > .98 1.02 2.27 < 20 0/-18 3a -A 0.37 43 2.30 > .98 0.99 < 10 0/-18 22 -C 0.16 42 2.36 0.28 34 > .99 2.38 0.80 <10 -20/-29 30 -B 0.13 32 > .95 2.52 0.34 41 2.43 > .90 0.99 <10 -20/-29 30 -B 0.15 40 2.48 0.22 76 > .98 0.91 1.20 < 10 0/-18 14 0.20 69 > .99 0.82 1.18 < 10 0/-18 6 0.57 68 > .99 1.31 0.89 < 10 0/-18 6 0.25 66 > .98 1.35 0.64 77 > .99 1.29 0.99 < 10 0/-18 6 0.27 75 > .98 1.32 0.65 78 > .99 1.22 0.95 < 10 0/-18 6 0.29 77 > .95 1.23 0.53 64 > .99 1.34 0.85 <10 -20/-29 30 0.23 62 > .97 1.36 0.64 77 1.33 > .90 1.02 <10 -20/-29 30 0.27 74 1.38 ST ST -A -A -A -A -A See page 1-33 for Dimensions and Wiring Diagrams PAGE 1-32 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS F40T8 FOR F40T8 LAMPS Overall Dimensions Draw # L ST -A -B -C 9.50” 9.50” 9.50” 14.25” W 2.40” 1.70” 1.50” 1.18” Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.29 100 > .99 0.81 0.81 < 10 0/-18 7 0.81 97 > .99 0.89 0.86 < 10 0/-18 7a 0.35 94 > .98 0.91 0.93 111 > .99 0.86 0.96 < 10 0/-18 7a 0.39 107 > .98 0.90 0.95 114 > .99 0.81 0.92 < 10 0/-18 7a 0.41 109 > .98 0.84 0.79 95 > .99 0.74 0.70 <10 -20/-29 49 0.34 92 > .98 0.76 0.93 111 0.84 > .90 0.93 <10 -20/-29 49 0.40 109 0.85 ST -A -A -A -A -A Fluorescent-Electronic Lamp Starting Line Catalog Qty. Method Volts Number F40T8 - Three Lamp Applications 347 B432I347HPL 120 B432IUNVEL-A 277 3 PAR-IS 120 B432IUNVHE-A 277 120 B432IUNVHP-A 277 120 B432PUNVEL-A 277 3 PAR-PS 120 B432PUNVHE-A 277 Mounting Dimensions H M X 1.55” 1.18” 1.00” 1.00” 8.89” 1.69” 8.89” 1.69” 8.89” 0.88” 13.75” --- -A, -B ST -C WIRING DIAGRAMS Line Black White BALLAST Blue Blue Blue Red LAMP LAMP LAMP For Two Lamp Operation, Insulate one blue lead to 600V DIAGRAM 1 Line Black White Yellow Yellow DIAGRAM 2 DIAGRAM 3a DIAGRAM 6 Blue BALLAST Blue Red Red LAMP LAMP LAMP LAMP For Three Lamp Operation, Insulate one blue lead to 600V For three lamp operation, cap any blue lead, insulate to 600V DIAGRAM 7 DIAGRAM 7a For one lamp operation, cap any blue lead, insulate to 600V DIAGRAM 14 DIAGRAM 30 DIAGRAM 22 DIAGRAM 49 DIAGRAM 49 PAGE 1-33 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) T8 • Instant Starting Options SLIMLINE Slimline Lamps • 1-2 Lamp Applications • 8’ T8 SLIMLINE Fluorescent-Electronic • High Performance Models TRIAD® ELECTRONIC BALLASTS FOR (1) AND (2) F48T8, F72T8, F96T8 AND F96T8ES LAMPS Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F48T8 - One Lamp Applications 120 B244 I120HE 0.30 35 > .95 1.04 2.97 0/-18 14 ST 1 IS < 10 277 B244 I277HE-A 0.14 36 > .90 1.06 2.94 0/-18 14 -A F48T8 - Two Lamp Applications 120 B244 I120HE 0.47 55 0.90 1.64 0/-18 14 ST > .95 2 PAR-IS < 10 277 B244 I277HE-A 0.21 56 0.89 1.59 0/-18 14 -A F72T8 - One Lamp Applications 120 B244 I120HE 0.42 50 1.03 2.06 0/-18 14 ST > .95 1 IS < 10 277 B244 I277HE-A 0.19 52 1.04 2.00 0/-18 14 -A F72T8 - Two Lamp Applications 120 B244 I120HE 0.70 0.88 1.07 0/-18 14 ST 82 > .95 2 PAR-IS < 10 277 B244 I277HE-A 0.30 0.87 1.06 0/-18 14 -A F96T8 - One Lamp Applications 120 0.54 > .99 B259IUNVEL-A 64 0.99 1.55 < 10 32/0 15 -A 277 0.24 > .97 120 0.60 72 > .99 1.50 B259IUNVHP-A 1.08 < 10 32/0 14 -A 1 IS 277 0.26 71 > .98 1.52 120 0.60 71 > .99 1.52 B259IUNVHE-A 1.08 < 10 32/0 15 -A 277 0.26 70 > .97 1.54 120 0.93 111 > .99 0.79 -A B259IUNVEL-A .88 < 10 32/0 15 277 0.39 108 > .98 0.81 347 B259I347HP 0.20 68 > .97 1.05 1.54 < 10 32/0 14 ST F96T8 - Two Lamp Applications 120 0.84 101 > .99 0.77 -A B259IUNVEL-A .78 < 10 32/0 15 277 0.36 99 > .98 0.79 120 0.92 108 > .99 0.81 -A B259IUNVHE-A .88 < 10 60/16 15 277 0.39 107 > .99 0.82 120 0.95 113 > .99 0.78 2 PAR-IS B259IUNVHP-A 0.88 < 10 32/0 14 -A 277 0.40 110 > .98 0.80 347 B259I347HP 0.33 113 > .99 0.89 0.79 < 10 32/0 14 ST F96T8ES (57W) - One Lamp Applications 120 0.56 67 > .99 1.61 1 IS B259IUNVHE-A 1.08 < 10 60/16 15 -A 277 0.26 66 > .97 1.64 120 0.51 > .99 B259IUNVEL-A 61 0.99 1.62 < 10 60/16 15 -A 277 0.23 > .97 F96T8ES (57W) - Two Lamp Applications 120 0.92 108 > .99 0.81 B259IUNVHE-A 0.88 < 10 60/16 15 -A 277 0.39 107 > .99 0.82 2 PAR-IS 120 0.80 95 > .99 0.82 B259IUNVEL-A 0.78 < 10 60/16 15 -A 277 0.34 93 > .98 0.84 F96T8ES (54W) - One Lamp Applications 120 0.51 61 > .99 1.77 1 IS B259IUNVHE-A 1.08 < 10 60/16 15 -A 277 0.23 60 > .96 1.80 F96T8ES (54W) - Two Lamp Appl F96T8ES (54W) - Two Lamp Applications 120 0.80 95 > .99 0.93 2 PAR-IS B259IUNVHE-A 0.88 < 10 60/16 15 -A 277 0.34 93 > .98 0.95 F96T8ES (49W) - One Lamp Applications 120 0.41 48 > .99 2.06 1 IS B259IUNVEL-A 0.99 < 10 60/16 15 -A 277 0.19 49 > .96 2.02 F96T8ES (54W) - Two Lamp Appl F96T8ES (49W) - Two Lamp Applications 120 0.64 77 > .99 1.01 2 PAR-IS B259IUNVEL-A 0.78 < 10 60/16 15 -A 277 0.28 76 > .98 1.03 IS = Instant Start PS = Programmed Start RS = Rapid Start PAR-IS = Parallel Instant Start STARTING METHOD LEGEND PAR-PS = Parallel Programmed Start SER-PS = Series Programmed Start PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start SER-IS = Series Instant Start See page 1-33 for Dimensions and Wiring Diagrams PAGE 1-34 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS FOR (1) AND (2) F48T8HO, F60T8HO, F72T8HO AND F96T8HO LAMPS IS = Instant Start PS = Programmed Start Overall Dimensions Draw # L SL -S 11.75” 11.75” RS = Rapid Start PAR-IS = Parallel Instant Start W • 1-2 Lamp Applications High Output Lamps • 4-8’ T8 High Output Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.75 > .98 < 10 93 0.98 1.05 -20/-29 4a 0.34 > .95 < 12 -S 0.41 > .96 < 10 49 1.01 2.06 -20/-29 4 0.19 > .92 < 15 -S 0.80 > .98 < 10 96 1.00 1.04 -20/-29 4a 0.36 > .95 < 12 -S 1.57 0.67 -S 187 184 > .98 0.95 > .96 STARTING METHOD LEGEND PAR-PS = Parallel Programmed Start SER-PS = Series Programmed Start 0.51 0.52 < 10 -20/-29 PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start 4 SER-IS = Series Instant Start Mounting Dimensions H M X 3.13” 1.78” 11.14” 2.00” 1.70” 1.18” 11.19” 1.05” WIRING DIAGRAMS For One Lamp Operation, Insulate one blue lead to 600V Yellow leads must be connected to plunger end of fixture For One Lamp Applications, individually cap yellow leads, Insulate fo 600V DIAGRAM 3 DIAGRAM 4 DIAGRAM 4a PAGE 1-35 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic Lamp Starting Line Catalog Qty. Method Volts Number F48T8HO - One Lamp Applications 120 1 PS B286PUNVHE-S 277 F48T8HO - Two Lamp Applications 120 2 SER-PS B286PUNVHE-S 277 F96T8HO - One Lamp Applications 120 1 PS B286PUNVHE-S 277 F96T8HO - Two Lamp Applications 120 2 SER-PS B286PUNVHE-S 277 T8HO • Instant Starting Options • Multiple Lamp Operation • Rapid and Programmed Starting Options • T5 Ballasts meet ANSI requirement for end-of-lamp life safety shutdown • Super Low Profile Designs • 1-2 Lamp Applications Fluorescent-Electronic T5 TRIAD® T5 ELECTRONIC BALLASTS FOR F8, F13, F14, F21 AND F24 LAMPS Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F14T5 - One Lamp Applications 120 0.12 > .99 < 10 B114PUNV70-D 14 0.70 5.00 277 0.06 > .90 < 15 50/10 43 -D 120 0.14 > .98 B228PUNV-C 17 1.05 6.17 < 10 0/-18 40 -C 1 PS 277 0.07 > .90 120 0.15 > .98 B228PUNV-N 17 1.02 6.17 < 10 0/-18 40 -N 277 0.07 > .90 120 0.14 16 > .98 5.56 < 15 B228PUNV90-C 0.89 277 0.07 17 > .85 5.24 < 20 0/-18 37 -C 120 0.14 16 > .98 6.00 B228PUNV95-D 0.96 < 10 0/-18 40 -D 277 0.07 17 > .85 5.65 F14T5 - Two Lamp Applications 120 0.28 > .98 B228PUNV-C 32 1.00 3.12 < 10 0/-18 37 -C 277 0.12 > .95 120 0.27 > .98 B228PUNV-N 33 1.01 3.06 < 10 0/-18 37 -N 277 0.12 > .95 120 0.24 > .99 B228PUNV85-D 29 0.88 3.03 < 10 0/-18 30 -D 277 0.11 > .97 2 SER-PS 120 0.24 > .99 < 10 B228PUNV90-C 29 0.89 3.07 277 0.11 > .90 < 15 0/-18 37 -C 120 0.26 31 > .99 3.06 B228PUNV95-D 0.95 < 10 0/-18 37 -D 277 0.12 32 > .95 2.97 120 0.31 37 > .99 3.12 B228PUNV115-D 1.15 < 10 0/-18 37 -D 277 0.13 36 > .98 3.19 F21T5 - One Lamp Applications 120 0.13 15 > .99 3.33 < 10 50/10 43 -D 277 B128PUNV50-D 0.07 16 > .86 0.50 3.13 120 0.14 > .99 20 < 10 50/10 43 -D 277 B128PUNV60-D 0.07 > .88 0.60 3.00 120 0.18 21 > .99 3.33 < 10 50/10 43 -D 277 B128PUNV70-D 0.08 22 > .90 0.70 3.18 120 0.20 > .98 24 < 10 0/-18 40 -C 277 B228PUNV-C 0.09 > .95 1.03 4.29 120 0.20 > .98 1 PS 24 < 10 0/-18 40 -N 277 B228PUNV-N 0.10 > .95 1.01 4.21 120 0.19 22 > .99 4.05 < 10 277 B228PUNV90-C 0.09 23 > .90 0.89 3.87 < 15 0/-18 37 -C 120 0.20 > .99 24 < 10 0/-18 40 -D 277 B228PUNV95-D 0.09 > .90 0.96 4.00 F21T5 - Two Lamp Applications 120 0.41 48 2.08 > .98 1.00 < 10 0/-18 37 -C 277 B228PUNV-C 0.17 46 2.17 120 0.39 47 2.13 > .98 1.00 < 10 0/-18 37 -N 277 B228PUNV-N 0.17 46 2.17 120 0.35 41 > .99 2.10 277 B228PUNV85-D 0.86 < 10 0/-18 30 -D 0.15 40 > .98 2.15 2 SER-PS 120 0.35 > .99 42 2.12 < 10 0/-18 37 -C 277 B228PUNV90-C 0.16 > .95 0.89 120 0.40 > .99 B228PUNV95-D 47 0.95 2.02 < 10 0/-18 37 -D 277 0.17 > .95 120 0.44 52 > .99 2.21 B228PUNV115-D 1.15 < 10 0/-18 37 -D 277 0.19 51 > .98 2.25 See page 1-41 for Dimensions and Wiring Diagrams IS = Instant Start PS = Programmed Start RS = Rapid Start PAR-IS = Parallel Instant Start STARTING METHOD LEGEND PAR-PS = Parallel Programmed Start SER-PS = Series Programmed Start PAGE 1-36 PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start SER-IS = Series Instant Start FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® T5 ELECTRONIC BALLASTS FOR F28 AND F35T5 LAMPS • Multiple Lamp Operation • Rapid and Programmed Rapid Starting Options • T5 Ballasts meet ANSI requirement for end-of-lamp life safety shutdown • Super Low Profile Designs • 1-2 Lamp Applications Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.17 20 0.08 0.18 22 0.09 25 0.21 25 0.11 27 0.27 32 0.12 0.27 32 0.12 0.25 30 0.11 29 0.25 29 0.11 30 0.25 30 0.11 0.55 0.23 0.54 0.23 0.48 0.21 0.48 0.21 0.51 0.22 0.59 0.25 63 61 65 64 54 53 58 56 61 60 69 68 > .99 < 10 > .90 0.50 2.50 < 12 > .99 2.73 < 10 > .92 0.60 2.40 > .99 2.80 < 10 > .93 0.70 2.59 > .98 1.00 3.12 < 10 > .95 > .98 1.00 3.12 < 10 > .95 > .99 2.93 0.88 < 10 > .98 3.00 > .99 3.10 < 10 > .90 0.90 3.00 < 15 > .99 0.96 3.20 < 10 > .95 1.59 1.00 < 10 1.64 1.54 > .98 1.00 < 10 1.56 > .99 1.57 0.85 < 10 > .98 1.60 1.55 > .98 0.90 < 10 1.61 > .99 1.56 0.95 < 10 > .98 1.58 > .99 1.67 1.15 < 10 > .98 1.69 > .98 50/10 43 -D 50/10 43 -D 0/-18 40 -C 0/-18 40 -N 0/-18 40 -D 0/-18 37 -C 0/-18 40 -D 0/-18 37 -C 0/-18 37 -N 0/-18 30 -D 0/-18 37 -C 0/-18 37 -D 0/-18 37 -D 0.24 29 0.11 > .99 0.96 < 10 0/-18 40 -D 0.48 0.21 > .99 1.67 0.95 < 10 1.70 0/-18 37 -D < 10 0/-18 40 -N < 10 0/-18 40 -D 0/-18 37 -N 0/-18 37 -D < 10 50/10 43 -D < 10 0/-18 40 -D < 10 0/-18 40 -C < 10 0/-18 40 -N 57 56 0.24 29 0.11 0.23 28 0.11 0.49 0.21 0.47 0.20 59 58 56 54 0.25 30 0.12 0.32 38 0.14 0.33 40 0.15 0.33 40 0.15 > .98 > .95 1.00 > .99 > .95 0.96 > .98 > .99 3.31 50/10 43 -D 3.45 3.43 1.69 1.00 < 10 1.72 1.70 0.95 < 10 1.76 > .99 > .95 0.70 > .99 > .97 0.95 > .99 > .97 1.00 > .99 > .95 1.00 2.33 2.50 2.50 2.50 See page 1-41 for Dimensions and Wiring Diagrams PAGE 1-37 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic Lamp Starting Line Catalog Qty. Method Volts Number F28T5 - One Lamp Applications 120 277 B128PUNV50-D 120 277 B128PUNV60-D 120 277 B128PUNV70-D 120 277 B228PUNV-C 120 277 B228PUNV-N 120 B228PUNV85-D 277 120 1 PS 277 B228PUNV90-C 120 B228PUNV95-D 277 F28T5 - Two Lamp Applications 120 277 B228PUNV-C 120 277 B228PUNV-N 120 B228PUNV85-D 277 120 277 B228PUNV90-C 2 SER-PS 120 277 B228PUNV95-D 120 277 B228PUNV115-D F28T5ES (26W) - One Lamp Applications 120 1 PS 277 B228PUNV95-D F28T5ES (26W) - Two Lamp Applications 120 2 SER-PS 277 B228PUNV95-D F28T5ES (25W) - One Lamp Applications 120 1 PS 277 B228PUNV-N 120 277 B228PUNV95-D F28T5ES (25W) - Two Lamp Applications 120 2 SER-PS 277 B228PUNV-N 120 277 B228PUNV95-D F35T5 - One Lamp Applications 120 277 B135PUNV70-D 120 277 B228PUNV95-D 120 1 PS 277 B228PUNV-C 120 277 B228PUNV-N T5 Fluorescent-Electronic T5HO • Multiple Lamp Operation • Programmed Rapid and Instant Starting Models • T5HO Ballasts meet ANSI requirements for end-of-lamp life safety shutdown • Super Low Profile Designs • 1-4 Lamp Applications TRIAD® T5HO ELECTRONIC BALLASTS FOR F24, F39 AND F54 T5HO LAMPS Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F24T5HO - One Lamp Applications 120 0.23 > .98 1 PS B224PUNV-C 28 1.06 3.79 < 10 0/-18 40 -C 277 0.10 > .95 F24T5HO - Two Lamp Applications 120 0.45 53 1.89 B224PUNV-C > .98 1.00 < 10 0/-18 37 -C 277 0.19 52 1.92 2 SER-PS 120 0.51 > .98 B239PUNV-D 59 1.15 1.95 < 10 0/-18 37 -D 277 0.22 > .95 F39T5HO - One Lamp Applications 120 0.34 41 2.32 B224PUNV-C > .98 0.95 < 10 0/-18 40 -C 277 0.15 40 2.38 1 PS 120 0.39 > .98 B239PUNV-D 47 1.10 2.34 < 10 0/-18 40 -D 277 0.18 > .95 F39T5HO - Two Lamp Applications 120 0.75 89 1.12 2 SER-PS B239PUNV-D > .98 1.00 < 10 0/-18 37 -D 277 0.32 88 1.14 F54T5HO - One Lamp Applications 347 B254P347-D 0.19 64 > .95 1.02 1.59 < 10 -20/-29 37 -D 347 0.19 > .98 < 10 B254PHRVHB-E 66 1.02 1.55 -20/-29 42 -E 480 0.15 > .90 < 15 120 0.49 > .99 B254PUNV-D 59 1.00 1.69 < 10 -20/-29 40 -D 1 PS 277 0.22 > .96 120 0.49 > .99 B254PUNVHB-D 59 1.00 1.69 < 10 -20/-29 40 -D 277 0.22 > .96 120 0.50 60 > .99 1.00 1.67 < 10 -20/-29 A -A 277 B254PUNVPL-A 0.23 59 > .94 1.02 1.71 120 0.50 60 > .99 1.00 1.67 B254PUNVPLHBA < 10 -20/-29 A -A 277 0.23 59 > .94 1.02 1.71 120 0.54 > .95 < 15 B454PUNV-E 65 1.05 1.62 -20/-29 44 -E 277 0.26 > .90 < 20 120 0.54 > .95 < 15 B454PUNVHB-E 65 1.05 1.62 -20/-29 44 -E 277 0.26 > .90 < 20 F54T5HO - Two Lamp Applications 347 0.35 120 > .98 0.83 B254PHRVHB-E 1.00 < 10 -20/-29 41 -E 480 0.26 119 > .95 0.84 120 0.96 116 > .99 0.86 B254PUNV-D 1.00 < 10 -20/-29 37 -D 277 0.41 113 > .98 0.88 120 0.96 116 > .99 0.86 B254PUNVHB-D 1.00 < 10 -20/-29 37 -D 2 SER-PS 277 0.41 113 > .98 0.88 347 B254P347-D 0.35 120 > .98 1.00 0.83 < 10 -20/-29 37 -D 120 1.01 122 0.82 < 10 B454PUNV-E > .95 1.00 -20/-29 44 -E 277 0.44 121 0.83 < 15 120 1.01 122 0.82 < 10 B454PUNVHB-E > .95 1.00 -20/-29 44 -E 277 0.44 121 0.83 < 15 120 0.94 113 > .99 0.96 0.85 < 10 -20/-29 A -A 277 B254PUNVPL-A 0.40 110 > .98 0.99 0.90 2 PAR-PS 120 0.94 113 > .99 0.96 0.85 B254PUNVPLHBA < 10 -20/-29 A -A 277 0.40 110 > .98 0.99 0.90 F54T5HO - Three Lamp Applications 120 1.52 184 > .98 0.57 B454PUNV-E 1.05 < 10 -20/-29 44 -E 277 0.66 182 > .95 0.58 3 SER-PS 120 1.52 184 > .98 0.57 B454PUNVHB-E 1.05 < 10 -20/-29 44 -E 277 0.66 182 > .95 0.58 120 1.34 159 > .99 0.90 0.57 < 10 -20/-29 B -E 277 B454PUNVPL-E 0.58 157 > .97 3 PAR-PS 120 1.34 159 > .99 0.90 0.57 < 10 -20/-29 B -E 277 B454PUNVPLHBE 0.58 157 > .97 See page 1-41 for Dimensions and Wiring Diagrams PAGE 1-38 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® T5HO ELECTRONIC BALLASTS FOR F24, F39 AND F54 T5HO LAMPS Lamp Starting Line Catalog Qty. Method Volts Number • Multiple Lamp Operation • Programmed Rapid and Instant Starting Models • T5HO Ballasts meet ANSI requirements for end-of-lamp life safety shutdown • Super Low Profile Designs • 1-4 Lamp Applications T5HO Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. > .98 0.43 1.00 < 10 -20/-29 44 -E > .99 0.44 > .98 0.43 1.00 < 10 -20/-29 44 -E > .99 0.44 > .99 0.90 0.43 < 10 -20/-29 B -E > .98 > .99 1.00 > .96 > .99 1.00 > .93 > .99 1.00 > .93 1.82 < 10 1.81 < 10 1.83 1.81 < 10 1.83 > .99 0.93 1.00 < 10 > .98 0.97 > .99 0.92 0.96 < 10 > .97 0.95 > .99 0.92 0.96 < 10 > .97 0.95 > .99 0.90 > .97 > .99 0.90 > .97 0.60 < 10 0.61 0.60 < 10 0.61 > .99 0.90 > .97 > .99 0.90 > .97 0.46 < 10 0.47 0.46 < 10 0.47 > .99 > .92 > .99 > .92 1.00 0.99 1.00 0.99 1.79 < 10 1.80 1.79 < 10 1.80 > .99 0.96 > .97 > .99 0.96 > .97 0.90 < 10 0.93 0.90 < 10 0.93 > .99 0.90 > .97 > .99 0.90 > .97 0.58 < 10 0.60 0.58 < 10 0.60 > .99 0.90 > .98 > .99 0.90 > .98 0.45 < 10 0.46 0.45 < 10 0.46 > .99 1.00 > .96 > .99 1.00 > .96 > .99 1.00 > .92 > .99 1.00 > .92 1.85 < 10 1.89 1.85 < 10 1.89 1.85 < 10 1.89 1.85 < 10 1.89 Page 1-39 60/16 40 -D 60/16 A -A 60/16 A -A 60/16 37 -D 60/16 A -A 60/16 A -A 60/16 B -E 60/16 B -E 60/16 B -E 60/16 B -E 60/16 A -A 60/16 A -A 60/16 A -A 60/16 A -A 60/16 B -E 60/16 B -E 60/16 B -E 60/16 B -E 60/16 40 -D 60/16 40 -D 60/16 A -A 60/16 A -A FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic F54T5HO - Four Lamp Applications 120 1.96 235 B454PUNV-E 277 0.84 229 4 SER-PS 120 1.96 235 B454PUNVHB-E 277 0.84 229 120 1.77 210 4 PAR-PS B454PUNVPLHBE 277 0.76 207 F54T5HOES (51W) - One Lamp Applications 120 0.46 B254PUNV-D 55 277 0.20 120 0.46 1 PS B254PUNVPL-A 55 277 0.21 120 0.46 B254PUNVPLHBA 55 277 0.21 F54T5HOES (51W) - Two Lamp Applications 120 0.89 107 2 SER-PS B254PUNV-D 277 0.37 103 120 0.90 104 277 B254PUNVPL-A 0.39 101 2 PAR-PS 120 0.90 104 277 B254PUNVPLHBA 0.39 101 F54T5HOES (51W) - Three Lamp Applications 120 1.27 151 277 B454PUNVPL-E 0.55 148 3 PAR-PS 120 1.27 151 277 B454PUNVPLHBE 0.55 148 F54T5HOES (51W) - Four Lamp Applications 120 1.65 196 277 B454PUNVPL-E 0.71 192 4 PAR-PS 120 1.65 196 277 B454PUNVPLHBE 0.71 192 F54T5HOES (50W) - One Lamp Applications 120 0.47 56 277 B254PUNVPL-A 0.21 55 1 PS 120 0.47 56 277 B254PUNVPLHBA 0.21 55 F54T5HOES (50W) - Two Lamp Applications 120 0.92 106 277 B254PUNVPL-A 0.40 103 2 PAR-PS 120 0.92 106 277 B254PUNVPLHBA 0.40 103 F54T5HOES (50W) - Three Lamp Applications 120 1.30 154 277 B454PUNVPL-E 0.56 151 3 PAR-PS 120 1.30 154 277 B454PUNVPLHBE 0.56 151 F54T5HOES (50W) - Four Lamp Applications 120 1.67 198 277 B454PUNVPL-E 0.72 194 4 PAR-PS 120 1.67 198 277 B454PUNVPLHBE 0.72 194 F54T5HOES (49W) - One Lamp Applications 120 0.44 54 B254PUNV-D 277 0.20 53 120 0.44 54 B254PUNVHB-D 1 PS 277 0.20 53 120 0.45 54 B254PUNVPL-A 277 0.21 53 120 0.45 54 B254PUNVPLHBA 277 0.21 53 • Multiple Lamp Operation • Programmed Rapid and Instant Starting Models • T5HO Ballasts meet ANSI requirements for end-of-lamp life safety shutdown • Super Low Profile Designs • 1-4 Lamp Applications T5HO Fluorescent-Electronic Lamp Starting Line Catalog Qty. Method Volts Number TRIAD® T5HO ELECTRONIC BALLASTS FOR F24, F39 AND F54 T5HO LAMPS Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F54T5HOES (49W) - Two Lamp Applications 120 0.87 277 B254PUNV-D 0.37 2 SER-PS 120 0.87 277 B254PUNVHB-D 0.37 120 0.86 277 B254PUNVPL-A 0.37 2 PAR-PS 120 0.86 277 B254PUNVPLHBA 0.37 F54T5HOES (49W) - Three Lamp Applications 120 1.19 277 B454PUNVPL-E 0.52 3 PAR-PS 120 1.19 277 B454PUNVPLHBE 0.52 F54T5HOES (49W) - Four Lamp Applications 120 1.61 277 B454PUNVPL-E 0.69 4 PAR-PS 120 1.61 277 B454PUNVPLHBE 0.69 F54T5HOES (47W) - One Lamp Applications 120 0.42 277 B254PUNV-D 0.20 120 0.45 1 PS 277 B254PUNVPL-A 0.21 120 0.45 277 B254PUNVPLHBA 0.21 F54T5HOES (47W) - Two Lamp Applications 120 0.85 277 B254PUNV-D 0.36 120 0.86 277 B254PUNVPL-A 0.37 2 PAR-PS 120 0.86 277 B254PUNVPLHBA 0.37 F54T5HOES (47W) - Three Lamp Applications 120 1.21 277 B454PUNVPL-E 0.53 3 PAR-PS 120 1.21 277 B454PUNVPLHBE 0.53 F54T5HOES (47W) - Four Lamp Applications 120 1.59 277 B454PUNVPL-E 0.68 4 PAR-PS 120 1.59 277 B454PUNVPLHBE 0.68 105 102 105 102 103 101 103 101 > .99 1.00 > .98 > .99 1.00 > .98 > .99 0.97 > .97 > .99 0.97 > .97 0.95 < 10 0.98 0.95 < 10 0.98 0.94 < 10 0.96 0.94 < 10 0.96 142 140 142 140 > .99 0.90 > .96 > .99 0.90 > .96 0.63 < 10 0.64 0.63 < 10 0.64 192 188 192 188 > .99 0.90 > .98 > .99 0.90 > .98 0.47 < 10 0.48 0.47 < 10 0.48 54 53 54 53 54 53 > .99 1.00 > .95 > .99 1.00 > .92 > .99 1.00 > .92 1.85 < 10 1.89 1.86 < 10 1.87 1.86 < 10 1.87 102 99 100 98 100 98 > .99 0.98 1.00 < 10 > .98 1.01 > .99 0.96 < 10 0.96 > .97 > .99 0.96 < 10 0.96 > .97 144 142 144 142 > .99 0.90 0.63 < 10 > .96 > .99 0.90 0.63 < 10 > .96 189 185 189 185 > .99 0.90 > .97 > .99 0.90 > .97 0.48 < 10 0.49 0.48 < 10 0.49 60/16 37 -D 60/16 37 -D 60/16 A -A 60/16 A -A 60/16 B -E 60/16 B -E 60/16 B -E 60/16 B -E 60/16 40 -D 60/16 A -A 60/16 A -A 60/16 37 -D 60/16 A -A 60/16 A -A 60/16 B -E 60/16 B -E 60/16 B -E 60/16 B -E See page 1-41 for Dimensions and Wiring Diagrams For one lamp operation, cap blue leads individually, insulate to 600V. For three lamp operation, cap Blue/White leads individually, insulate to 600V. DIAGRAM A DIAGRAM B DIAGRAM 50 Page 1-40 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) T5 TRIAD® T5 & T5HO ELECTRONIC BALLASTS Lamp Starting Line Catalog Qty. Method Volts Number & T5HO Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. Overall Dimensions Draw # L -C -D -E 14.25” 16.88” 16.88” W > .99 1.00 > .92 > .99 1.00 > .92 1.95 < 10 1.96 1.95 < 10 1.96 > .99 0.93 > .97 > .99 0.93 > .97 0.96 < 10 0.98 0.96 < 10 0.98 > .99 0.92 > .96 > .99 0.92 > .96 0.70 < 10 0.71 0.70 < 10 0.71 > .99 0.92 > .97 > .99 0.92 > .97 0.53 < 10 0.54 0.53 < 10 0.54 60/16 A -A 60/16 A -A 60/16 A -A 60/16 A -A 60/16 B -E 60/16 B -E 60/16 B -E 60/16 B -E Mounting Dimensions H M X 1.18” 1.00” 13.75” 1.18” 1.00” 16.20” 1.74” 1.18” 16.28” — — — -C, -D -E WIRING DIAGRAMS DIAGRAM 4b DIAGRAM 37 DIAGRAM 40 For one lamp operation, individually cap yellow and yellow/black leads, insulate to 600V. DIAGRAM 42 DIAGRAM 30 DIAGRAM 41 DIAGRAM 43 PAGE 1-41 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic F54T5HOES (44W) - One Lamp Applications 120 0.43 51 277 B254PUNVPL-A 0.20 1 PS 120 0.43 51 277 B254PUNVPLHBA 0.20 F54T5HOES (44W) - Two Lamp Applications 120 0.81 97 277 B254PUNVPL-A 0.35 95 2 PAR-PS 120 0.81 97 277 B254PUNVPLHBA 0.35 95 F54T5HOES (44W) - Three Lamp Applications 120 1.10 131 277 B454PUNVPL-E 0.49 130 3 PAR-PS 120 1.10 131 B454PUNVPLHBE 277 0.49 130 F54T5HOES (44W) - Four Lamp Applications 120 1.46 174 277 B454PUNVPL-E 0.63 171 4 PAR-PS 120 1.46 174 277 B454PUNVPLHBE 0.63 171 Fluorescent-Electronic F30T12, F30T12ES, F32T12 • Rapid Starting Options • Standard & High Performance Models T12 Straight Lamps • 1-3 Lamp Applications TRIAD® ELECTRONIC BALLASTS FOR (1), (2) AND (3) F30T12, F30T12ES, & (2)F32T12 LAMPS Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Qty. Method Volts Number (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp F25T12 - Two Lamp Applications 120 0.40 47 1.89 2 PAR-IS B232IUNV-C > .98 0.89 < 10 0/-18 277 0.17 46 1.93 F25T12 - Three Lamp Applications 120 0.58 69 > .99 0.90 1.30 3 PAR-IS B332IUNVHP-A < 10 0/-18 277 0.26 68 > .95 0.91 1.34 F25T12 - Four Lamp Applications 120 0.77 91 > .99 0.99 4 PAR-IS B432IUNVHP-A 0.90 < 10 0/-18 277 0.34 88 > .95 1.02 F32T12 - One Lamp Applications 1 RS 277 B234SR277M-A* 0.15 33 > .80 0.94 2.85 < 30 50/10 F32T12 - Two Lamp Applications 120 B234SR120M-A∆ 0.46 54 > .98 0.90 1.67 < 10 50/10 2 SER-RS 277 B234SR277M-A* 0.21 55 > .90 0.87 1.58 < 30 50/10 Wiring Diag. Dim. 21 -C 6 -A 7a -A 4 -A 30 4 -A -A ∆ Residential use only. *Not for sale for use in the US. Overall Dimensions Draw # L ST -A 9.50” 9.50” W 2.40” 1.70” Mounting Dimensions H M X 1.55” 8.89” 1.69” 1.18” 8.89” 1.69” ST WIRING DIAGRAMS -A DIAGRAM 47 DIAGRAM 44 Line Black White DIAGRAM 48 BALLAST Blue Blue Blue Red LAMP LAMP LAMP For One lamp Operation, Individually Cap blue leads, Insulate to 600V For Two Lamp Operation, Insulate one blue lead to 600V For three lamp operation, cap any blue lead, insulate to 600V DIAGRAM 4 DIAGRAM 6 DIAGRAM 7a DIAGRAM 30 DIAGRAM 21 PAGE 1-42 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS FOR (1) , (2) AND (3) F40T12 AND F34T12ES LAMPS • Standard & High Performance Models • Rapid Starting Options F40T12 & T12 Straight Lamps F34T12ES • 1-3 Lamp Applications T12 U-Shaped Lamps Wiring Diag. Dim. 4 4 -A -A 30 4 4 -A -A -A 4 4 -A -A 30 4 4 -A -A -A ∆ Residential use only. * Not for sale for use in the US. Overall Dimensions Draw # L -A 9.50” W 1.70” Mounting Dimensions H M X WIRING DIAGRAMS 1.18” 8.89” 1.69” -A For One Lamp Applications, individually cap blue leads, Insulate fo 600V DIAGRAM 4 PAGE 1-43 DIAGRAM 30 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Qty. Method Volts Number (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp F40T12 - One Lamp Applications 220 B240R220-A* 0.20 44 > .99 1.04 2.38 < 10 50/10 1 RS 277 B234SR277M-A* 0.17 42 > .88 0.94 2.24 < 30 50/10 F40T12 - Two Lamp Applications 120 B234SR120M-A∆ 0.58 69 > .98 0.90 1.30 < 10 50/10 2 SER-RS 277 B234SR277M-A* 0.26 70 > .90 0.87 1.24 < 30 50/10 2 PAR-RS 220 B240R200-A* 0.32 70 > .99 0.90 1.29 < 10 50/10 F40T12ES (34W) - One Lamp Applications 220 B240R200-A* 0.17 36 > .99 1.04 2.86 < 10 60/16 1 RS 277 B234SR277M-A* 0.15 35 > .80 0.94 2.69 < 30 60/16 F40T12ES (34W) - Two Lamp Applications 120 B234SR120M-A∆ 0.48 58 > .98 0.86 1.48 < 10 60/16 2 SER-RS 277 B234SR277M-A* 0.23 60 > .90 0.87 1.45 < 30 50/10 2 PAR-RS 220 B240R200-A* 0.27 59 > .99 0.90 1.52 < 10 60/16 T12 SLIMLINE Fluorescent-Electronic TRIAD® ELECTRONIC BALLASTS • Standard & High Performance Models Slimline Lamps • Instant Starting Options FOR F48T12, F48T12ES, F60T12, F64T12 & F72T12 LAMPS • 1-2 Lamp Applications Lamp Starting Line Catalog Qty. Method Volts Number F48T12 - One Lamp Applications 1 IS 120 B260IUNVHP 277 F48T12 - Two Lamp Applications 2 PAR-IS 120 B260I120M-A* 120 B260IUNVHP 277 F48T12ES - One Lamp Applications 1 IS 120 B260IUNVHP 277 F48T12ES - Two Lamp Applications 2 PAR-IS 120 B260IUNVHP 277 F60T12 - One Lamp Applications 1 IS 120 B260IUNVHP 277 F60T12 - Two Lamp Applications 2 PAR-IS 120 B260IUNVHP 277 F64T12 - One Lamp Applications 1 IS 120 B260IUNVHP 277 F64T12 - Two Lamp Applications 2 PAR-IS 120 B260IUNVHP 277 F72T12 - One Lamp Applications 1 IS 120 B260IUNVHP 277 Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.39 47 > .95 1.10 0.18 2.34 < 10 0/-18 14 SL 50/10 14 -A 0/-18 14 SL 0.62 0.61 0.27 68 75 74 > .90 0.90 1.32 < 30 > .98 1.27 0.95 < 10 > .95 1.28 0.32 0.15 38 39 > .98 2.89 1.10 < 10 > .95 2.82 60/16 14 SL 0.57 67 1.39 > .95 0.93 < 10 0.25 66 1.41 60/16 14 SL 0.49 58 0.22 < 10 0/-18 14 SL 0.77 92 1.00 > .98 0.92 < 10 0.33 91 1.01 0/-18 14 SL 0.51 0.35 > .98 1.80 1.10 < 10 > .95 1.15 0/-18 14 SL 0.81 97 0.95 > .98 0.92 < 10 0.35 96 0.96 0/-18 14 SL 0.55 68 1.56 > .95 1.06 < 10 0.25 67 1.58 0/-18 14 SL 61 96 > .98 1.10 > .95 1.90 * Residential use only. Overall Dimensions Draw # L SL -A 11.75” 9.50” W 3.13” 1.70” Mounting Dimensions H M X WIRING DIAGRAMS 1.78” 11.14” 2.00” 1.18” 8.89” 1.69” For One Lamp Operation, Insulate one blue lead to 600V SL DIAGRAM 14 -A PAGE 1-44 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS • Standard & High Performance Models F72T12(cont.), F84T12, F96T12 & F96T12ES LAMPS • Instant Starting Options SLIMLINE Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.90 105 > .95 0.90 0.86 < 30 0.90 109 0.83 > .99 0.91 < 10 0.39 107 0.85 50/10 14 -A 0/-18 14 SL 0.63 76 1.45 > .98 1.10 < 10 0.28 75 1.47 0/-18 14 SL 1.03 123 0.72 > .98 0.88 < 10 0.44 120 0.73 0/-18 14 SL 0.70 85 1.24 > .98 1.05 < 10 0.31 84 1.25 0/-18 14 SL 1.16 139 0.63 > .99 0.88 < 10 0.50 137 0.64 0/-18 14 SL 0.61 66 > .90 1.09 1.65 < 30 0.59 72 1.43 > .98 1.03 < 10 0.26 70 1.47 60/16 14 -A 60/16 14 SL 0.90 105 > .95 0.88 0.84 < 30 0.96 112 0.79 > .99 0.88 < 10 0.40 110 0.80 60/16 14 -A 60/16 14 SL * Residential use only. IS = Instant Start PRS = Programmed Rapid Start RS = Rapid Start PAR-IS = Parallel Instant Start Overall Dimensions Draw # L SL -A 11.75” 9.50” SL W 3.13” 1.70” STARTING METHOD LEGEND PAR-PRS = Parallel Programmed Rapid Start SER-PRS = Series Programmed Rapid Start Mounting Dimensions H M X 1.78” 11.14” 2.00” 1.18” 8.89” 1.69” PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start SER-IS = Series Instant Start WIRING DIAGRAMS For One Lamp Operation, Insulate one blue lead to 600V -A DIAGRAM 14 PAGE 1-45 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic Lamp Starting Line Catalog Qty. Method Volts Number F72T12 - Two Lamp Applications 2 PAR-IS 120 B260I120M-A* 120 B260IUNVHP 277 F84T12 - One Lamp Applications 1 IS 120 B260IUNVHP 277 F84T12 - Two Lamp Applications 2 PAR-IS 120 B260IUNVHP 277 F96T12 - One Lamp Applications 1 IS 120 B260IUNVHP 277 F96T12 - Two Lamp Applications 2 PAR-IS 120 B260IUNVHP 277 F96T12ES - One Lamp Applications 1 IS 120 B260I120M-A* 120 B260IUNVHP 277 F96T12ES - Two Lamp Applications 2 PAR-IS 120 B260I120M-A* 120 B260IUNVHP 277 • 1-2 Lamp Applications T12 Slimline Lamps T12HO • High Performance Models TRIAD® ELECTRONIC BALLASTS • Rapid Starting Options • 2 Lamp Applications Lamp Starting Line Catalog Qty. Method Volts Number FOR T12 HIGH OUTPUT LAMPS Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. Fluorescent-Electronic F48T12HO - One Lamp Applications 120 0.46 > .98 < 10 1 PS B295PUNVHE-S 55 0.93 1.69 -20/-29 277 0.22 > .90 < 12 F48T12HO - Two Lamp Applications 120 0.88 105 > .98 0.86 2 SER-PS B295PUNVHE-S 0.90 < 10 -20/-29 277 0.39 104 > .95 0.87 F60T12HO - One Lamp Applications 120 0.56 > .98 1 PS B295PUNVHE-S 67 0.92 1.37 < 10 -20/-29 277 0.26 > .92 F60T12HO - Two Lamp Applications 120 1.08 127 > .98 0.70 2 SER-PS B295PUNVHE-S 0.89 < 10 -20/-29 277 0.47 126 > .95 0.71 F72T12/BL/HO - Two Lamp Applications 2 SER-RS 120 493B2 1.60 180 > .90 1.00 0.56 < 25 50/10 F72T12HO - One Lamp Applications 120 0.70 > .98 1 PS B295PUNVHE-S 83 0.92 1.11 < 10 -20/-29 277 0.31 > .95 F72T12HO - Two Lamp Applications 120 1.34 157 0.56 2 SER-PS B295PUNVHE-S > .98 0.88 < 10 -20/-29 277 0.57 155 0.57 F73T12/BL/HO - Two Lamp Applications 2 SER-RS 120 493B2 1.60 180 > .90 1.00 0.56 < 25 50/10 F96T12HO - One Lamp Applications 120 0.88 104 > .98 0.88 1 PS B295PUNVHE-S 0.92 < 10 -20/-29 277 0.38 103 > .95 0.89 F96T12HO - Two Lamp Applications 120 1.72 204 0.43 2 SER-PS B295PUNVHE-S > .98 0.88 < 10 -20/-29 277 0.72 197 0.45 F96T12HOES (95W) - One Lamp Applications 120 0.73 > .98 1 PS B295PUNVHE-S 87 0.92 1.06 < 10 60/16 277 0.32 > .95 F96T12HOES (95W) - Two Lamp Applications 120 1.45 170 0.52 2 SER-PS B295PUNVHE-S > .98 0.88 < 10 -20/-29 277 0.61 167 0.53 Overall Dimensions Draw # L ST -S 9.50” 11.75” W Mounting Dimensions H M X 80 -S 80 -S 80 -S 80 -S 4 ST 80 -S 80 -S 4 ST 80 -S 80 -S 80 -S 80 -S WIRING DIAGRAMS 2.40” 1.55” 8.89” 1.69” 1.70” 1.18” 11.19” 1.05” DIAGRAM 40 ST SL DIAGRAM 4 DIAGRAM 80 PAGE 1-46 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) TRIAD® ELECTRONIC BALLASTS • Programmed Rapid Starting Options FOR F6T2, F8T2, F11T2 AND F13T2 LAMPS • 1-2 Lamp Applications Lamp Starting Line Catalog Qty. Method Volts Number F6T2 - One And Two Lamp Applications 120 2 SER-PS ES1786X 277 120 1 PS ES1786X 277 F8T2 - One And Two Lamp Applications 120 2 SER-PS ES1786X 277 120 1 PS ES1786X 277 F11T2 - One And Two Lamp Applications 120 2 SER-PS ES1786X 277 120 1 PS ES1786X 277 F13T2 - One And Two Lamp Applications 120 2 SER-PS ES1786X 277 120 1 PS ES1786X 277 T2 Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.12 14 7.14 > .97 1.00 < 10 0.07 15 6.67 0.07 8 12.50 > .97 1.00 < 10 0.05 9 11.11 0.17 20 5.00 > .97 1.00 < 10 0.08 21 4.76 0.10 11 > .97 1.00 9.09 < 10 0.06 37 ESX 0/-18 40 ESX 0/-18 37 ESX 0/-18 40 ESX 26 > .97 1.00 3.85 < 10 0/-18 37 ESX 15 > .97 1.00 6.67 < 10 0/-18 40 ESX 0/-18 37 ESX 0/-18 40 ESX 0.27 31 3.23 > .97 1.00 < 10 0.13 32 3.13 0.15 16 6.25 > .97 1.00 < 10 0.08 17 5.88 STARTING METHOD LEGEND IS = Instant Start PRS = Programmed Rapid Start Overall Dimensions Draw # L ESX 14.13” RS = Rapid Start PAR-IS = Parallel Instant Start W 1.24” PAR-PRS = Parallel Programmed Rapid Start SER-PRS = Series Programmed Rapid Start Mounting Dimensions H M X 0.73” 13.78” PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start SER-IS = Series Instant Start WIRING DIAGRAMS — DIAGRAM 37 ESX DIAGRAM 40 PAGE 1-47 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent-Electronic 0.20 0.09 0.12 0.07 0/-18 Energy Management System DCL® with DEMANDflex® DEMANDflex® ballasts are high efficiency program start ballasts with the flexibility to be tuned at the circuit level to fixed power levels during installation. They are fully compatible with occupancy sensors and exceed the CEE requirements for high efficiency program start T8 ballasts. DEMANDflex® ballasts having tuning capabilities with ranges from 100% to 50% power levels, making them applicable for a wide range of lighting installations. Installations can start with DEMANDflex® ballasts and after installation, the ballasts can be tuned to maximize energy savings with fixed light levels. No dimming control wires are associated with DEMANDflex® ballasts which makes them easy to install in all existing fluorescent lighting applications. DEMANDflex® ballasts can also be integrated with DCL® controls to be part of the most cost-effective lighting system available. DCL® controls allow for local control with energy management systems and external control via the internet for networked managed systems. DCL® controls allow for integration with utility demand response programs that provide for improved pricing contracts to end-users in exchange for the utility to have the ability to lower lighting power levels during periods of high demand. DCL/DEMANDflex Universal Lighting Technologies is a member of the Panasonic Group Product Overview DEMANDflex® Ballasts n Power level tuning potential to 50% –Set the circuit power level at installation –Typical 10% to 15% power reduction n Install the same as standard PRS ballasts –No control wires necessary –Standard mounting footprint –Same wiring as program rapid start ballasts n High efficiency program start operation –Exceeds CEE T8 requirements –Compatible with occupancy sensors n NEMA premium –Exceeds CEE T8 requirements –Compatible with occupancy sensors DCL® Controlled Systems n –Avoid high peak charges –Reduce demand costs n Programmable fade rates –Gradual transitions –No disruptions n n DCL/DEMANDflex Reduces lighting power by up to 50% Use existing power connections to communicate to the ballasts –No control wires Implement with various controls and systems –BAS Systems –Photo Cells –Occupancy Sensors –Contact Closure For more information contact Universal or visit www.unvlt.com. PAGE 2-2 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) DEMANDflex® FOR (1), (2), (3) & (4) LAMPS DEMANDflex Universal DCL® Dimming Programmed Rapid Start 1, 2, 3, & 4 Lamp Applications Visit www.unvlt.com for a comprehensive description of the DCL® system and DEMANDflex® ballasts • • • • T8 Certification Line Input Power Ballast Ballast Lamp Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number c (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F32T8 - One Lamp Applications • • • • • • • • • • • • • • • • • • • • • • • • 0.24 0.11 0.11 0.05 0.32 0.15 0.14 0.07 0.20 0.09 0.09 0.05 29 14 29 14 38 18 39 19 24 11 24 12 > .95 > .95 > .95 > .90 > .95 > .95 > .95 > .95 > .95 > .95 > .95 > .95 0.88 0.28 0.88 0.28 1.15 0.50 1.15 0.50 0.68 0.18 0.68 0.18 3.01 2.05 3.03 1.96 3.03 2.78 2.95 2.63 2.85 1.64 2.85 1.57 < 10 < 15 < 10 < 15 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 12a 12a 12a 12a 12a 12a 12a 12a 12a 12a 12a 12a -A -A -A -A -A -A -A -A -A -A -A -A B232PUNVDR-A @ 100% 120 B232PUNVDR-A @ 50% B232PUNVDR-A @ 100% 277 B232PUNVDR-A @ 50% B232PUNVDRH-A @ 100% 120 2 PRS B232PUNVDRH-A @ 50% B232PUNVDRH-A @ 100% 277 B232PUNVDRH-A @ 50% B232PUNVDRL-A @ 100% 120 B232PUNVDRL-A @ 50% B232PUNVDRL-A @ 100% 277 B232PUNVDRL-A @ 50% • • • • • • • • • • • • • • • • • • • • • • • • 0.47 0.22 0.20 0.10 0.62 0.30 0.26 0.13 0.40 0.19 0.17 0.09 57 28 56 28 75 37 73 36 47 24 47 24 > .95 > .95 > .95 > .95 > .95 > .90 > .95 > .90 > .95 > .95 > .95 > .95 0.87 0.34 0.87 0.35 1.15 0.50 1.15 0.50 0.71 0.19 0.71 0.19 1.53 1.20 1.56 1.22 1.53 1.35 1.58 1.39 1.51 0.81 1.51 0.81 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 12b 12b 12b 12b 12b 12b 12b 12b 12b 12b 12b 12b -A -A -A -A -A -A -A -A -A -A -A -A B332PUNVDR-A @ 100% 120 B332PUNVDR-A @ 50% B332PUNVDR-A @ 100% 277 B332PUNVDR-A @ 50% B332PUNVDRL-A @ 100% 120 3 PRS B332PUNVDRL-A @ 50% B332PUNVDRL-A @ 100% 277 B332PUNVDRL-A @ 50% B332PUNVDRH-E @ 100% 120 B332PUNVDRH-E @ 50% B332PUNVDRH-E @ 100% 277 B332PUNVDRH-E @ 50% • • • • • • • • • • • • • • • • • • • • • • • • 0.70 0.34 0.30 0.16 0.59 0.29 0.25 0.13 0.95 0.48 0.41 0.21 85 42 83 41 72 36 72 36 115 57 111 55 > .95 > .95 > .95 > .95 > .95 > .95 > .95 > .95 > .95 > .95 > .95 > .95 0.87 0.35 0.87 0.35 0.71 0.22 0.71 0.22 1.15 0.50 1.15 0.50 1.02 0.83 1.05 0.85 0.99 0.61 0.99 0.61 1.00 0.88 1.04 0.91 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 12c 12c 12c 12c 12c 12c 12c 12c 12d 12d 12d 12d -A -A -A -A -A -A -A -A -E -E -E -E B432PUNVDR-E @ 100% 120 B432PUNVDR-E @ 50% B432PUNVDR-E @ 100% 277 4 PRS B432PUNVDR-E @ 50% B432PUNVDRL-E @ 100% 120 B432PUNVDRL-E @ 50% B432PUNVDRL-E @ 100% 277 B432PUNVDRL-E @ 50% • • • • • • • • • • • • • • • • 0.96 0.48 0.41 0.20 0.78 0.37 0.34 0.17 116 58 112 56 93 47 93 47 > .95 > .95 > .95 > .95 > .95 > .95 > .95 > .95 0.88 0.35 0.88 0.35 0.71 0.21 0.71 0.21 0.75 0.60 0.79 0.63 0.76 0.45 0.76 0.45 < 10 < 10 < 10 < 15 < 10 < 15 < 10 < 15 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 12e 12e 12e 12e 12e 12e 12e 12e -E -E -E -E -E -E -E -E F32T8 - Two Lamp Applications F32T8 - Three Lamp Applications F32T8 - Four Lamp Applications See page 2-7 for Dimensions and Wiring Diagrams PAGE 2-3 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) DEMANDflex B232PUNVDR-A @ 100% 120 B232PUNVDR-A @ 50% B232PUNVDR-A @ 100% 277 B232PUNVDR-A @ 50% B232PUNVDRH-A @ 100% 120 1 PRS B232PUNVDRH-A @ 50% B232PUNVDRH-A @ 100% 277 B232PUNVDRH-A @ 50% B232PUNVDRL-A @ 100% 120 B232PUNVDRL-A @ 50% B232PUNVDRL-A @ 100% 277 B232PUNVDRL-A @ 50% DEMANDflex T8 • • • • DEMANDflex® niversal DCL® Dimming U Programmed Rapid Start 1, 2, 3, & 4 Lamp Applications Visit www.unvlt.com for a comprehensive description of the DCL system and DEMANDflex ballasts FOR (1), (2), (3) & (4) LAMPS Certification Line Input Power Ballast Ballast Lamp Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number c (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F25T8 - One Lamp Applications B232PUNVDR-A @ 100% 120 B232PUNVDR-A @ 50% B232PUNVDR-A @ 100% 277 B232PUNVDR-A @ 50% B232PUNVDRH-A @ 100% 120 1 PRS B232PUNVDRH-A @ 50% B232PUNVDRH-A @ 100% 277 B232PUNVDRH-A @ 50% B232PUNVDRL-A @ 100% 120 B232PUNVDRL-A @ 50% B232PUNVDRL-A @ 100% 277 B232PUNVDRL-A @ 50% • • • • • • • • • • • • • • • • • • • • • • • • 0.19 0.10 0.08 0.05 0.25 0.12 0.11 0.06 0.15 0.08 0.07 0.04 22 12 22 13 30 14 30 15 18 10 18 10 > .95 > .95 > .95 > .90 > .95 > .95 > .95 > .90 > .95 > .95 > .95 > .95 0.87 0.35 0.88 0.35 1.16 0.50 1.16 0.50 0.69 0.18 0.69 0.18 4.00 2.93 3.95 2.82 3.87 3.57 3.81 3.33 3.85 1.84 3.77 1.75 < 10 < 15 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 15 < 10 < 15 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 12a 12a 12a 12a 12a 12a 12a 12a 12a 12a 12a 12a -A -A -A -A -A -A -A -A -A -A -A -A B232PUNVDR-A @ 100% 120 B232PUNVDR-A @ 50% B232PUNVDR-A @ 100% 277 B232PUNVDR-A @ 50% B232PUNVDRH-A @ 100% 120 2 PRS B232PUNVDRH-A @ 50% B232PUNVDRH-A @ 100% 277 B232PUNVDRH-A @ 50% B232PUNVDRL-A @ 100% 120 B232PUNVDRL-A @ 50% B232PUNVDRL-A @ 100% 277 B232PUNVDRL-A @ 50% • • • • • • • • • • • • • • • • • • • • • • • • 0.36 0.19 0.16 0.09 0.46 0.21 0.20 0.10 0.30 0.15 0.13 0.07 44 23 43 23 55 26 55 26 36 18 35 18 > .95 > .95 > .95 > .95 > .95 > .90 > .95 > .90 > .95 > .95 > .95 > .95 0.87 0.35 0.87 0.35 1.15 0.50 1.15 0.50 0.69 0.19 0.69 0.19 2.01 1.56 2.05 1.53 2.09 1.92 2.08 1.92 1.93 1.06 1.95 1.03 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 12b 12b 12b 12b 12b 12b 12b 12b 12b 12b 12b 12b -A -A -A -A -A -A -A -A -A -A -A -A B332PUNVDR-A @ 100% 120 B332PUNVDR-A @ 50% B332PUNVDR-A @ 100% 277 B332PUNVDR-A @ 50% B332PUNVDRL-A @ 100% 120 3 PRS B332PUNVDRL-A @ 50% B332PUNVDRL-A @ 100% 277 B332PUNVDRL-A @ 50% B332PUNVDRH-E @ 100% 120 B332PUNVDRH-E @ 50% B332PUNVDRH-E @ 100% 277 B332PUNVDRH-E @ 50% • • • • • • • • • • • • • • • • • • • • • • • • 0.55 0.27 0.24 0.13 0.47 0.24 0.21 0.11 0.74 0.35 0.33 0.16 66 33 65 32 56 28 55 29 89 42 89 43 > .95 > .95 > .95 > .95 > .95 > .95 > .95 > .90 > .95 > .95 > .95 > .95 0.87 0.35 0.87 0.35 0.71 0.23 0.71 0.23 1.17 0.50 1.17 0.50 1.32 1.06 1.34 1.09 1.27 0.81 1.29 0.80 1.31 1.19 1.31 1.16 < 10 < 10 < 10 < 15 < 10 < 10 < 10 < 10 < 10 < 15 < 10 < 15 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 12c 12c 12c 12c 12c 12c 12c 12c 12d 12d 12d 12d -A -A -A -A -A -A -A -A -E -E -E -E B432PUNVDR-E @ 100% 120 B432PUNVDR-E @ 50% B432PUNVDR-E @ 100% 277 4 PRS B432PUNVDR-E @ 50% B432PUNVDRL-E @ 100% 120 B432PUNVDRL-E @ 50% B432PUNVDRL-E @ 100% 277 B432PUNVDRL-E @ 50% • • • • • • • • • • • • • • • • 0.75 0.37 0.33 0.17 0.61 0.31 0.27 0.15 90 44 89 44 73 37 72 38 > .95 > .95 > .95 > .90 > .95 > .95 > .95 > .90 0.89 0.35 0.89 0.35 0.71 0.21 0.71 0.21 0.99 0.80 1.00 0.80 0.97 0.56 0.98 0.56 < 10 < 15 < 10 < 15 < 10 < 15 < 10 < 15 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 12e 12e 12e 12e 12e 12e 12e 12e -E -E -E -E -E -E -E -E F25T8 - Two Lamp Applications F25T8 - Three Lamp Applications DEMANDflex F25T8 - Four Lamp Applications See page 2-7 for Dimensions and Wiring Diagrams PAGE 2-4 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) DEMANDflex® • • • • FOR (1), (2), (3) & (4) LAMPS DEMANDflex Universal DCL® Dimming Programmed Rapid Start 1, 2, 3, & 4 Lamp Applications Visit www.unvlt.com for a comprehensive description of the DCL system and DEMANDflex ballasts T8 Certification Line Input Power Ballast Ballast Lamp Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number c (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F17T8 - One Lamp Applications • • • • • • • • • • • • • • • • • • • • • • • • 0.14 0.08 0.06 0.04 0.18 0.09 0.09 0.05 0.11 0.09 0.05 0.04 16 10 17 10 22 11 22 11 13 10 13 11 > .95 > .95 > .95 > .85 > .95 > .95 > .95 > .90 > .95 > .95 > .95 > .85 0.92 0.27 0.92 0.27 1.15 0.50 1.15 0.50 0.70 0.20 0.70 0.20 5.65 2.81 5.48 2.66 5.23 4.63 5.23 4.55 5.47 1.98 5.22 1.87 < 10 < 15 < 10 < 15 < 10 < 15 < 10 < 15 < 10 < 15 < 10 < 15 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 12a 12a 12a 12a 12a 12a 12a 12a 12a 12a 12a 12a -A -A -A -A -A -A -A -A -A -A -A -A B232PUNVDR-A @ 100% 120 B232PUNVDR-A @ 50% B232PUNVDR-A @ 100% 277 B232PUNVDR-A @ 50% B232PUNVDRH-A @ 100% 120 2 PRS B232PUNVDRH-A @ 50% B232PUNVDRH-A @ 100% 277 B232PUNVDRH-A @ 50% B232PUNVDRL-A @ 100% 120 B232PUNVDRL-A @ 50% B232PUNVDRL-A @ 100% 277 B232PUNVDRL-A @ 50% • • • • • • • • • • • • • • • • • • • • • • • • 0.25 0.13 0.13 0.06 0.32 0.16 0.14 0.07 0.21 0.12 0.09 0.06 30 16 30 16 38 19 39 19 25 15 25 15 > .95 > .95 > .95 > .95 > .95 > .95 > .95 > .90 > .95 > .95 > .95 > .95 0.90 0.27 0.90 0.27 1.16 0.50 1.16 0.50 0.69 0.19 0.69 0.19 3.00 1.72 3.00 1.67 3.05 2.63 2.97 2.63 2.78 1.29 2.76 1.24 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 15 < 10 < 10 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 12b 12b 12b 12b 12b 12b 12b 12b 12b 12b 12b 12b -A -A -A -A -A -A -A -A -A -A -A -A B332PUNVDR-A @ 100% 120 B332PUNVDR-A @ 50% B332PUNVDR-A @ 100% 277 B332PUNVDR-A @ 50% B332PUNVDRL-A @ 100% 120 3 PRS B332PUNVDRL-A @ 50% B332PUNVDRL-A @ 100% 277 B332PUNVDRL-A @ 50% B332PUNVDRH-E @ 100% 120 B332PUNVDRH-E @ 50% B332PUNVDRH-E @ 100% 277 B332PUNVDRH-E @ 50% • • • • • • • • • • • • • • • • • • • • • • • • 0.40 0.20 0.18 0.10 0.33 0.18 0.15 0.09 0.54 0.25 0.24 0.12 48 24 48 24 40 22 40 23 65 32 65 32 > .95 > .95 > .95 > .90 > .95 > .95 > .95 > .85 > .95 > .95 > .95 > .90 0.89 0.36 0.89 0.36 0.73 0.23 0.73 0.23 1.19 0.51 1.19 0.51 1.86 1.51 1.86 1.51 1.83 1.05 1.83 1.02 1.83 1.59 1.84 1.59 < 10 < 10 < 10 < 15 < 10 < 10 < 10 < 15 < 10 < 15 < 10 < 15 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 12c 12c 12c 12c 12c 12c 12c 12c 12d 12d 12d 12d -A -A -A -A -A -A -A -A -E -E -E -E B432PUNVDR-E @ 100% 120 B432PUNVDR-E @ 50% B432PUNVDR-E @ 100% 277 4 PRS B432PUNVDR-E @ 50% B432PUNVDRL-E @ 100% 120 B432PUNVDRL-E @ 50% B432PUNVDRL-E @ 100% 277 B432PUNVDRL-E @ 50% • • • • • • • • • • • • • • • • 0.53 0.27 0.24 0.13 0.43 0.26 0.20 0.12 64 32 63 32 52 31 52 31 > .95 > .95 > .95 > .90 > .95 > .95 > .95 > .90 0.91 0.35 0.91 0.35 0.73 0.21 0.73 0.21 1.42 1.09 1.44 1.09 1.41 0.69 1.41 0.67 < 10 < 15 < 10 < 15 < 10 < 15 < 10 < 15 32/0 32/0 32/0 32/0 32/0 32/0 32/0 32/0 12e 12e 12e 12e 12e 12e 12e 12e -E -E -E -E -E -E -E -E F17T8 - Two Lamp Applications F17T8 - Three Lamp Applications F17T8 - Four Lamp Applications See page 2-7 for Dimensions and Wiring Diagrams FOR MORE INFORMATION CALL PAGE 2-5 1-800-BALLAST (225-5278) DEMANDflex B232PUNVDR-A @ 100% 120 B232PUNVDR-A @ 50% B232PUNVDR-A @ 100% 277 B232PUNVDR-A @ 50% B232PUNVDRH-A @ 100% 120 1 PRS B232PUNVDRH-A @ 50% B232PUNVDRH-A @ 100% 277 B232PUNVDRH-A @ 50% B232PUNVDRL-A @ 100% 120 B232PUNVDRL-A @ 50% B232PUNVDRL-A @ 100% 277 B232PUNVDRL-A @ 50% DEMANDflex T5, T5HO & TT5 • • • • • niversal DCL® Dimming U Programmed Rapid Start 2 Lamp Applications for T5HO 1 & 2 Lamp Applications for T5 Visit www.unvlt.com for a comprehensive description of the DCL system and DEMANDflex ballasts DEMANDflex® FOR T5 & T5HO LAMPS Certification Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number c (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F28T5 - One Lamp Applications B128PUNVDRH-D @ 100% 120 1 PRS B128PUNVDRH-D @ 50% B128PUNVDRH-D @ 100% 277 B128PUNVDRH-D @ 50% • • • • • • • • 0.32 0.16 0.14 0.08 37 19 37 19 > .99 > .99 > .96 > .88 1.15 0.38 1.15 0.38 3.11 2.00 3.11 2.00 < 10 < 10 < 10 < 10 50/10 50/10 50/10 50/10 12g 12g 12g 12g -D -D -D -D B228PUNVDRH-D @ 100% 120 2 PRS B228PUNVDRH-D @ 50% B228PUNVDRH-D @ 100% 277 B228PUNVDRH-D @ 50% • • • • • • • • 0.60 0.30 0.25 0.13 72 36 70 35 > .95 > .95 > .95 > .95 1.15 0.51 1.15 0.50 1.60 1.42 1.64 1.43 < 10 < 10 < 10 < 10 50/10 50/10 50/10 50/10 12f 12f 12f 12f -D -D -D -D B228PUNVDRH-D @ 100% 120 2 PRS B228PUNVDRH-D @ 50% B228PUNVDRH-D @ 100% 277 B228PUNVDRH-D @ 50% • • • • • • • • 0.75 0.38 0.31 0.17 90 45 87 44 > .95 > .95 > .95 > .95 1.13 0.51 1.13 0.51 1.26 1.13 1.30 1.16 < 10 < 10 < 10 < 10 50/10 50/10 50/10 50/10 12f 12f 12f 12f -D -D -D -D B128PUNVDRH-D 120 1 PRS B128PUNVDRH-D B128PUNVDRH-D 277 B128PUNVDRH-D @ 100% @ 50% @ 100% @ 50% • • • • • • • • 0.25 0.13 0.12 0.07 28 15 28 15 > .99 > .99 > .94 > .84 1.15 0.38 1.15 0.38 4.11 2.53 4.11 2.53 < 10 < 10 < 10 < 10 50/10 50/10 50/10 50/10 12g 12g 12g 12g -D -D -D -D B228PUNVDRH-D 120 2 PRS B228PUNVDRH-D B228PUNVDRH-D 277 B228PUNVDRH-D @ 100% @ 50% @ 100% @ 50% • • • • • • • • 0.47 0.23 0.20 0.11 56 28 55 28 > .95 > .95 > .95 > .90 1.16 0.51 1.16 0.51 2.07 1.82 2.11 1.82 < 10 < 10 < 10 < 10 50/10 50/10 50/10 50/10 12f 12f 12f 12f -D -D -D -D B228PUNVDRH-D 120 2 PRS B228PUNVDRH-D B228PUNVDRH-D 277 B228PUNVDRH-D @ 100% @ 50% @ 100% @ 50% • • • • • • • • 0.34 0.16 0.15 0.08 40 19 40 20 > .95 > .95 > .95 > .85 1.17 0.52 1.17 0.52 2.93 2.74 2.93 2.60 < 10 < 10 < 10 < 10 50/10 50/10 50/10 50/10 12f 12f 12f 12f -D -D -D -D B254PUNVDR-D @ 100% 120 2 PRS B254PUNVDR-D @ 50% B254PUNVDR-D @ 100% 277 B254PUNVDR-D @ 50% • • • • • • • • 1.00 0.50 0.43 0.22 120 60 120 60 > .95 > .95 > .95 > .90 1.00 0.45 1.00 0.45 0.83 0.75 0.83 0.75 < 10 < 10 < 10 < 10 0/-18 0/-18 0/-18 0/-18 12f 12f 12f 12f -D -D -D -D B254PUNVDR-D @ 100% 120 2 PRS B254PUNVDR-D @ 50% B254PUNVDR-D @ 100% 277 B254PUNVDR-D @ 50% • • • • • • • • 0.90 0.41 0.39 0.19 108 50 106 50 > .95 > .95 > .95 > .95 1.06 0.57 1.06 0.57 0.98 1.14 1.00 1.14 < 10 < 10 < 10 < 10 0/-18 0/-18 0/-18 0/-18 12f 12f 12f 12f -D -D -D -D B254PUNVDR-D 120 2 PRS B254PUNVDR-D B254PUNVDR-D 277 B254PUNVDR-D @ 100% @ 50% @ 100% @ 50% • • • • • • • • 0.97 0.47 0.42 0.21 115 57 113 57 > .95 > .95 > .95 > .95 1.10 0.63 1.11 0.63 0.96 1.11 0.98 1.11 < 10 < 10 < 10 < 10 0/-18 0/-18 0/-18 0/-18 12f 12f 12f 12f -D -D -D -D B254PUNVDR-D 120 2 PRS B254PUNVDR-D B254PUNVDR-D 277 B254PUNVDR-D @ 100% @ 50% @ 100% @ 50% • • • • • • • • 0.88 0.41 0.38 0.19 106 49 104 48 > .95 > .95 > .95 > .95 1.04 0.56 1.04 0.56 0.98 1.14 1.00 1.17 < 10 < 10 < 10 < 10 0/-18 0/-18 0/-18 0/-18 12f 12f 12f 12f -D -D -D -D B254PUNVDR-D @ 100% 120 2 PRS B254PUNVDR-D @ 50% • • • • 0.88 0.41 106 49 > .95 > .95 1.04 0.56 0.98 1.14 < 10 < 10 0/-18 0/-18 12f 12f -D -D F28T5 - Two Lamp Applications F35T5 - Two Lamp Applications F21T5 - One Lamp Applications F21T5 - Two Lamp Applications F14T5 - Two Lamp Applications F54T5HO - Two Lamp Applications FT55W/2G11 - Two Lamp Applications DEMANDflex FT50W/2G11 - Two Lamp Applications FC55T5-55W - Two Lamp Applications F21T5-55W - One Lamp Application See page 2-7 for Dimensions and Wiring Diagrams PAGE 2-6 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) DEMANDflex T8 DEMANDflex® WIRING DIAGRAMS Note: Nominal dimensions provided above Contact Universal for drawings and/or tolerances Ballast case must be grounded. A star washer or other paint penetrating device is required. Wiring Diagram 12a Wiring Diagram 12e Wiring Diagram 12b Wiring Diagram 12f Wiring Diagram 12c Wiring Diagram 12g Wiring Diagram 12d Overall Dimensions Draw # L 9.50” 16.88” 16.88” -A, -E 1.70” 1.18” 1.82” Mounting Dimensions H M X 1.18” 1.00” 1.18” 8.89” 16.20” 16.28” 1.69” — — -D FOR MORE INFORMATION CALL PAGE 2-7 1-800-BALLAST (225-5278) DEMANDflex -A -D -E W DCL Controls DCL CONTROLS MODEL LP12DCLUNV-xx** SC20DCLUNV** MC20DCLUNV** RSMDCL51 WTPDCL51∆ WPS5527K DESCRIPTION Circuit Control Panel Single Circuit Controller Open Style Single Circuit Controller Contact Interface Controller Time/Photo Controller Photo Sensor for WTPDCL LP12DCLUNV-xx Dimensions Mounting Length 32” 24” Width 20” 16” Depth 4.3” The same cabinet size is used for the four different panels. the quantity of individual controllers installed is determined by the model number. xx = number of circuits (03 - 12) * For additional lighting system controllers, contact Universal Lighting. ** Modbus versions of these controls are available. ∆ Consult Universal for configuration options. SC20DCLUNV SC20DCLUNV Single Circuit Controller MOUNTING PATTERN Dimensions Length 9.66” Width 3.98” Depth 3.21” MC20DCLUNV Open Style, Single Circuit Controller Circuit control panels are used to send commands down the lighting circuit to the DemandFlex ballasts. The LP12DCLUNV-xx panels are available with 3 to 12 integral circuit control modules. If more than 12 circuits are being controlled, additional panels can be used. The SC20DCLUNV is used when there are a small number of circuits or space limitations prevent the use of an LP12DCLUNV panel. One RSMDCL51 or WTPDCL51 can control up to 63 circuits. If more than 63 circuits are to be controlled, an RSMDCL can be connected in parallel with either controller for another 63 circuits. Contact Closure Interface Control DCL Controls Stand Alone Time Clock/Photo Cell Control The WTPDCL51 controller provides time of day scheduling and can also be connected to the WPS5527K Photo Cell for daylight harvesting. Manual override switches are also available. The RSMDCL51 controller integrates with external relays or switches to translate commands to the DCL system. This controller can be used to interface with building automation systems, PLC’s, or switches. These systems may also incorporate photo cells for dayllight harvesting. Note: Nominal dimensions provided above Contact Universal for drawings and/or tolerances FOR MORE INFORMATION CALL PAGE 2-8 1-800-BALLAST (225-5278) Controllable Lighting Fluorescent Energy Management / Dimming Ballasts and Controls The effective dimming of fluorescent lights delivers a wide range of benefits: greater control of workspace lighting, ability to create a mood, energy savings, and more. Universal Lighting Technologies (“Universal”) line of electronic dimming ballasts and controls lets you accomplish these goals with a variety of products to suit your dimming needs. From light level switching and analog dimming to digital dimming and controls, Universal has the products and technologies to meet today’s dimming requirements for energy savings and controllable lighting. Fluorescent Dimming Universal Lighting Technologies is a member of the Panasonic Group Product Overview Universal offers five different families of dimming products that can be used for today’s dimming requirements for architectural lighting control and energy management applications: BallaStar: Step-dimming SuperDim: Analog (0 to 10 volt) dimming DaliPRO: Digital dimming with the DALI protocol DaliPRO Premium: Parallel-lamp digital dimming (DALI) VariPRO: Parallel-lamp analog dimming LevelPRO: Parallel-lamp step dimming BallaStar® Light Level Switching (S30 & S50) Our Ballastar® line offers two options of light level switching (either 100/50% or 100/60/30%). That makes BallaStar® a cost-effective solution for both new construction and retrofits. Universal BallaStar® ballasts are designed to ensure optimum lamp performance. Their Lamp Current Crest Factors are well below the maximum 1.7 ANSI standard — and they start the lamps according to ANSI recommendations at all dimming levels. Both of these important design parameters ensure optimum lamp performance. In addition, BallaStar® ballasts actually increase cathode heating when dimming to maintain the cathode’s proper temperature, which enhances lamp life and performance stability. Fluorescent Dimming • 1, 2, & 3 lamp models for 120 & 277 volt • Switches to preset light levels, keeping all lamps illuminated • Eliminates the dark spots associated with inboard/outboard configurations • Connects with two line voltage power leads – Wires the same as an inboard/outboard fixture – No special controls required; uses two wall switches • Meets all ASHRAE 90.1 and California Title 24 requirements for lighting control • THD <10% • Lower installed costs; less wiring and equipment required Ballastar® Light Level Switching for ultimate control. PAGE 2-10 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Product Overview SuperDim® Analog Dimming Ballasts Universal Lighting’s new SuperDim® analog dimming ballasts are a cost-effective choice for large scale dimming applications. SuperDim® ballasts are designed for T8 and T5 linear fluorescent lamps and T4 4-pin quad and triple compact fluorescent lamps. SuperDim® ballasts are compatible with a wide range of 0 – 10 volt controls and can be connected to photocells for daylight harvesting. The resulting energy savings makes it easy to adhere to even the strictest energy requirements, including California Title 24 and ASHRAE 90.1. These versatile ballasts offer programmed rapid start technology for longer lamp life. They also incorporate end-of-lamp-life shutdown circuits, low profile designs and < 10% THD at full bright. Features and Benefits • Ideal for T8 and T5 linear fluorescent lamps and T4 4-pin quad and triple compact fluorescent lamps • Compatible with most 0 – 10 volt manufactured controls • Daylight harvesting options with photocells for maximum energy savings • Programmed rapid start technology maximizes lamp life • Low profile design for fixture design flexibility • End-of-lamp-life shutdown circuitry ensures safe operation • < 10% THD at full bright • Universal input voltage (120–277 volts) for installation flexibility Fluorescent Dimming PAGE 2-11 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Product Overview DaliPROTM Digital Dimming Ballasts for DALI DaliPROTM ballasts from Universal Lighting let you take full advantage of the Digital Addressable Lighting Interface (DALI) standard...and that means greater flexibility, greater savings. The DALI Advantage The DALI protocol uses a 2-wire control loop to communicate with up to 64 ballasts. Broadcast, group and individual addressing is used to control light levels, recall scenes and poll ballast status. Many DALI-compatible controls are now available from established manufacturers; and new varieties are being developed daily. DaliPRO Features and Benefits • Available for T8, T5, T5HO and compact fluorescent lamps • Provides dimming down to 1% for linear lamps and 3% for compact fluorescent lamps • Lets you adapt instantly to additions or changes in lighting design without ballast or fixture rewiring • Offers status/performance data, including lamp status and system faults • Low profile designs for easy installation in a wide variety of fixtures • Universal input voltage (120– 277 volts) – Installer-friendly; ensures you have the right ballast every time – Reduces inventory costs and requirements • End-of-Lamp Life Shutdown with auto reset circuitry for safe operation • Programmed Rapid Start for long lamp life Fluorescent Dimming DaliPRO Premium DaliPRO Premium performs the same as standard DaliPRO but with the additonal feature of parallel-lamp operation. PAGE 2-12 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Product Overview VariPRO & LevelPRO Parallel-Lamp Dimming Ballasts Universal Lighting Technologies’ parallel-lamp dimming families combine new performance features with maximum energy savings. These ballasts provide parallel-lamp operation – when one lamp fails the other remains lit. This prevents fixture from going dark and simplifies troubleshooting and maintenance operations. Performance • Total Harmonic Distortion (THD) < 10% • Power Factor (PF) > 10% • NEMA Premium • RoHS Compliant General Features and Benefits • Quick Programmed Start Technology – Start time less than 700ms – Maintains long lamp life in frequently switched applications • High Efficiency Operation – Complies with CEE and NEMA Premium – Incorporates Anti-Striation circuitry – Designed for use with 30, 28, and 25 Watt energy saving lamps • True Parallel-Lamp Operation – When one lamp fails, other lamps continue to operate normally – Simplifies fixture troubleshooting • Universal Input Voltage and 347 Models VariPRO Features and Benefits • Analog (0-10V) Dimming Control – Compatible with industry standard 0-10V controls and photocells – Ideal for daylight harvesting TM LevelPRO Features and Benefits • Line Voltage Step Dimming Control – Uses standard wall switches – Provides even fixture illumination Fluorescent Dimming PAGE 2-13 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Application And Operating Information Although dimming ballasts follow similar installation and operating guidelines as electronic ballasts, application notes and other training materials, written specifically for dimming ballasts, are provided on www.unvlt.com website. SAFETY Analog dimming ballasts are controlled by using a low voltage 0-10VDC control circuit. Care should be taken to insure that the line voltage (AC) wires are not connected to the low voltage DC wires. SuperDim® Electronic dimming ballasts have a protection circuit that will sense if the ballast has been connected in this manner and not harm the ballast. Light Level Switching Installation Note The two power leads for the light level switching ballasts must be connected to the same power circuit. The leads should connect to separate switches or relays for control of the light level switching operation. Connection of the input leads to separate power circuits can damage the ballasts. Note: Do not connect any other ballast to the load side of the switches controlling the switched dimming ballast. Compatible Dimming Controls For a listing of compatible controls for universal analog ballasts, please consult catalog page 3-7, or call 1-800-BALLAST or check out the Dimming and Controls section of our home page at www.unvlt.com. Fusing Class P ballasts do not require fusing. Fusing can be used when a single circuit has a large number of fixtures/ballasts. For a comprehensive list of appropriate fuses, contact our Technical Engineering Services (TES) Department at 1-800-BALLAST. Detailed Operating Instructions Fluorescent Dimming For additional information on all of Universal’s dimming products, consult our website at www.unvlt.com. Application notes, dimming brochures and online training is available PAGE 2-14 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Controls For Analog Dimming Ballasts Manual Controls, Photo-Sensors, Wall Stations & Hand Held Remotes Manufacturer Website Telephone Cooper Controls www.coopercontrol.com (800) 553-3879 DimOnOff www.dimonoff.com (418) 682-3636 Douglas Lighting Controls, Inc www.douglaslightingcontrol.com (604) 873-2797 HUNT Dimming www.huntdimming.com (970) 484-9048 Lehigh Electric Products Co. www.lehighdim.com (610) 395-3386 Leviton www.leviton.com/les 1-800-736-6682 Lutron www.lutron.com/universal (888) LUTRON1 - Sales (800) 523-9466 - Technical Support NexLight www.nexlight.com (218) 828-3700 The Watt Stopper, Inc www.wattstopper.com (800) 879-8585 Marlin Controls www.marlincontrols.com (800) 788-5750 Sensor Switch, Inc. www.sensorswitch.com (800) 727-7483 (800) PASSIVE Touch-Plate Lighting Controls www.touchplate.com (260) 426-1565 Manufacturer Website Telephone Cooper Controls www.coopercontrol.com (800) 553-3879 DimOnOff www.dimonoff.com (418) 682-3636 Douglas Lighting Controls, Inc www.douglaslightingcontrol.com (604) 873-2797 Lehigh Electric Products Co. www.lehighdim.com (610) 395-3386 Lutron www.lutron.com/universal (888) LUTRON1 - Sales (800) 523-9466 - Technical Support NexLight www.nexlight.com (218) 828-3700 Marlin Controls www.marlincontrols.com (800) 788-5750 Sensor Switch, Inc. www.sensorswitch.com (800) 727-7483 (800) PASSIVE Touch-Plate Lighting Controls www.touchplate.com (260) 426-1565 Occupancy Sensors Systems: Control Panels, Building Management Systems, etc Website Telephone DimOnOff www.dimonoff.com (418) 682-3636 Douglas Lighting Controls, Inc www.douglaslightingcontrol.com (604) 873-2797 Cooper Controls www.coopercontrol.com (800) 553-3879 HUNT Dimming www.huntdimming.com (970) 484-9048 Lehigh Electric Products Co. www.lehighdim.com (610) 395-3386 Leviton www.leviton.com/les 1-800-736-6682 Lutron www.lutron.com/universal (888) LUTRON1 - Sales (800) 523-9466 - Technical Support NexLight www.nexlight.com (218) 828-3700 The Watt Stopper, Inc www.wattstopper.com (800) 879-8585 Marlin Controls www.marlincontrols.com (800) 788-5750 Touch-Plate Lighting Controls www.touchplate.com (260) 426-1565 The information listed above is provided by Universal Lighting Technologies to facilitate development of dimming systems. All information has been provided by the controls manufacturers, and Universal Lighting Technologies makes no guarantee regarding its accuracy. The reader is advised to contact these, and other manufacturers of analog dimming systems, to obtain application advice, to determine availability of the controls listed above, and to learn about other controls that may be offered. Data is subject to change without notice. PAGE 2-15 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent Dimming Manufacturer DaliPRO® DIMMING BALLASTS DaliPRO® Lamp Starting Qty. Method F1728 1 PRS 2 PRS F32T8 * 1 PRS 2 PRS F14T5 1 PRS 2 PRS F21T5 1 PRS Fluorescent Dimming 2 PRS F28T5 * 1 PRS Line Catalog Volts Number PRS 2 PRS Dim. <10% 32/0 1 -A 2.69 <10% 32/0 2 -A 1.00 2.90 <10% 32/0 1 -A 1.00 1.52 <10% 32/0 2 -A >.95 1.00 5.61 <10% 50/10 1 -D >.95 1.00 3.02 <10% 50/10 2 -D 25 24 45 45 >.95 1.00 4.15 <10% 50/10 1 -D >.95 1.00 3.02 <10% 50/10 2 -D 32 32 62 61 >.95 1.00 3.13 <10% 50/10 1 -D B228PUNVDV3-D 0.29 0.13 0.52 0.22 >.95 1.00 1.64 <10% 50/10 2 -D B135PUNVDV3-D 0.35 0.15 41 41 >.95 1.00 2.45 <10% 50/10 1 -D C213UNVDV3ME 0.15 0.07 0.27 0.12 18 18 32 32 >.90 1.00 5.56 <15% 32/0 3 -ME >.95 1.00 3.17 <15% 32/0 4 -ME 0.20 0.09 0.35 0.15 23 22 45 43 >.90 1.00 4.55 <10% 32/0 3 -ME >.95 1.00 2.36 <10% 32/0 4 -ME 0.25 0.11 0.44 0.19 31 29 51 50 >.95 1.00 2.00 <10% 32/0 3 -ME >.95 1.00 3.52 <10% 32/0 4 -ME 0.26 0.12 0.58 0.26 32 33 71 70 >.95 1.00 <10% 32/0 3 -ME >.95 1.00 3.10 1.41 1.43 <10% 0/-18 4 DP2 0.43 0.19 0.82 0.36 47 45 92 91 >.95 1.00 <10% 0/-18 3 DP2 >.95 1.00 <10% 0/-18 4 DP2 0.37 0.16 0.83 0.37 45 44 97 94 >.95 1.00 <10% 0/-18 5 DP1 >.95 1.00 <10% 0/-18 6 DP1 120 277 120 277 B132PUNVDV3-A 120 277 120 277 B114PUNVDV3-D B232PUNVDV3-A B232PUNVDV3-A B214PUNVDV3-D 120 277 120 277 B128PUNVDV3-D 120 277 120 277 B128PUNVDV3-D CFTR42W/G24q 120 1 PRS 277 120 2 PRS 277 1 Wiring Diag. B132PUNVDV3-A 2 PRS F35T5 120 1 277 CFQ13W/G24q 120 1 PRS 277 120 2 PRS 277 CFQ18W/G24q 120 1 PRS 277 120 2 PRS 277 CFQ26W/G24q 120 1 PRS 277 120 2 PRS 277 CFTR32W/G24q 120 1 PRS 277 120 2 PRS 277 FT40W/2G11 Min. F/C Start Temp 120 277 120 277 120 277 120 277 B228PUNVDV3-D C213UNVDV3ME C218UNVDV3ME C218UNVDV3ME C226UNVDV3ME C226UNVDV3ME C226UNVDV3ME C232PUNVDV3 C226UNVDV3ME C242PUNVDV3 C140PUNVDV3 C240PUNVDV3 Line Current (Amps) Input Power (Watts) Power Factor (PF) Ballast Factor (BF) 0.18 0.08 0.33 0.14 21 20 38 38 >.95 1.02 5.10 >.98 1.01 0.30 0.13 0.58 0.25 35 35 67 66 >.95 >.98 0.15 0.07 0.28 0.13 18 18 33 33 0.23 0.10 0.40 0.17 * Consult Specification Sheets at www.unvlt.com for additional lamp applications Ballast Efficacy THD Factor (BEF) % 2.13 2.22 1.09 1.10 2.22 2.27 1.03 1.06 See page 2-22 for Dimensions and Wiring Diagrams STARTING METHOD LEGEND PAR-PRS = Parallel Programmed Start PAGE 2-16 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) DaliPRO® Premium DIMMING BALLASTS DaliPRO® Premium PARALLEL LAMP DIMMING Lamp Starting Qty. Method F1728 1 PRS Line Catalog Volts Number Min. F/C Start Temp Wiring Diag. Dim. <10% 32/0 20 -A 5.13 5.13 5.13 2.84 <10% <20% <20% <10% 32/0 32/0 32/0 32/0 20 20 20 2 -D -A -D -A 1.02 1.00 1.00 2.84 2.78 2.78 <10% <10% <10% 32/0 32/0 32/0 2 2 2 -D -A -D >.98 1.00 2.80 <10% 32/0 20 -A >.98 >.95 >.95 >.99 1.00 1.00 1.00 1.00 2.85 2.87 2.87 1.53 <10% <10% <10% <10% 32/0 32/0 32/0 32/0 20 20 20 2 -D -A -D -A >.99 >.95 >.95 1.00 1.00 1.00 1.53 1.54 1.54 <10% <10% <10% 32/0 32/0 32/0 2 2 2 -D -A -D 19 19 19 19 19 19 35 35 35 35 35 35 >.95 1.01 5.19 <10% 50/10 20 -A >.95 >.90 >.90 >.98 1.01 1.01 1.01 1.01 5.19 5.27 5.27 2.92 <10% <20% <10% <10% 50/10 50/10 50/10 50/10 20 20 20 2 -D -A -D -A >.98 >.95 >.95 1.01 1.01 1.01 2.92 2.93 2.93 <10% <10% <10% 50/10 50/10 50/10 2 2 2 -D -A -D 35 34 35 34 34 34 62 61 62 61 64 64 >.98 1.00 2.95 <10% 50/10 20 -A >.98 >.95 >.95 >.99 1.00 1.00 1.00 1.00 2.95 2.94 2.94 1.63 <10% <10% <10% <10% 50/10 50/10 50/10 50/10 20 20 20 2 -D -A -D -A B228PUDV3PLD B228P3DV3PLA B228P3DV3PLD 0.30 0.13 0.29 0.12 0.10 0.10 0.56 0.24 0.56 0.24 0.19 0.19 >.99 >.98 >.98 1.00 1.00 1.00 1.63 1.57 1.57 <10% <10% <10% 50/10 50/10 50/10 2 2 2 -D -A -D B254PUDV3PLD B254P3DV3PLD B254PUDV3PLD B254P3DV3PLD 0.51 0.23 0.18 0.94 0.41 0.33 54 56 58 116 112 109 >.97 >.98 >.99 >.99 1.00 1.00 1.00 1.00 1.85 1.72 0.89 0.92 <10% <10% <10% <10% 32/0 32/0 32/0 32/0 20 20 2 2 -D -D -D -D B232PUDV3PLA B232PUDV3PLD B232P3DV3PLA B232P3DV3PLD B232PUDV3PLA B232PUDV3PLD B232P3DV3PLA B232P3DV3PLD B232PUDV3PLA B232PUDV3PLD B232P3DV3PLA B232P3DV3PLD B232PUDV3PLA B232PUDV3PLD B232P3DV3PLA B232P3DV3PLD B228PUDV3PLA B228PUDV3PLD B228P3DV3PLA B228P3DV3PLD B228PUDV3PLA B228PUDV3PLD B228P3DV3PLA B228P3DV3PLD B228PUDV3PLA B228PUDV3PLD B228P3DV3PLA B228P3DV3PLD B228PUDV3PLA Input Power (Watts) Power Factor (PF) Ballast Factor (BF) 0.19 0.08 0.19 0.08 0.07 0.07 0.32 0.14 0.32 0.14 0.11 0.11 20 20 20 20 20 20 37 36 37 36 37 37 >.95 1.02 5.13 >.95 >.95 >.95 >.98 1.02 1.04 1.04 1.02 >.98 >.95 >.95 0.30 0.13 0.31 0.13 0.11 0.11 0.58 0.25 0.58 0.25 0.19 0.19 36 35 36 35 35 35 67 65 67 65 65 65 0.16 0.07 0.16 0.07 0.06 0.06 0.29 0.13 0.29 0.13 0.10 0.10 * Consult Specification Sheets at www.unvlt.com for additional lamp applications Ballast Efficacy THD Factor (BEF) % See page 2-22 for Dimensions and Wiring Diagrams STARTING METHOD LEGEND PAR-PRS = Parallel Programmed Start PAGE 2-17 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent Dimming 120 277 120 1 PRS 277 1 PRS 347 1 PRS 347 120 2 PRS 277 120 2 PRS 277 2 PRS 347 2 PRS 347 F32T8* (also operates F28T8) 120 1 PRS 277 120 1 PRS 277 1 PRS 347 1 PRS 347 120 2 PRS 277 120 2 PRS 277 2 PRS 347 2 PRS 347 F14T5 (also operates F21T5) 120 1 PRS 277 120 1 PRS 277 1 PRS 347 1 PRS 347 120 2 PRS 277 120 2 PRS 277 2 PRS 347 2 PRS 347 F28T5 (also operates F28T5/ES) 120 1 PRS 277 120 1 PRS 277 1 PRS 347 1 PRS 347 120 1 PRS 277 120 1 PRS 277 1 PRS 347 1 PRS 347 F54T5HO* 120 1 PRS 277 1 PRS 347 120 2 PRS 277 2 PRS 347 Line Current (Amps) SuperDim® SuperDim® 0-10V DIMMING BALLASTS 0-10V DIMMING Please visit www.unvlt.com for the most up to date status and recent changes to the SuperDim product family. Fluorescent Dimming Lamp Starting Line Catalog Qty. Method Volts Number F17T8 120 1 PRS B132PUNVSV3-A 277 120 2 PRS B232PUNVSV3-A 277 F25T8 120 1 PRS B132PUNVSV3-A 277 120 2 PRS B232PUNVSV3-A 277 F32T8 120 1 PRS B132PUNVSV3-A 277 120 2 PRS B232PUNVSV3-A 277 F14T5 120 1 PRS B114PUNVSV3-D 277 120 2 PRS B214PUNVSV3-D 277 F21T5 120 1 PRS B128PUNVSV3-D 277 120 2 PRS B228PUNVSV3-D 277 F28T5 120 1 PRS B128PUNVSV3-D 277 120 2 PRS B228PUNVSV3-D 277 F35T5 120 1 PRS B135PUNVSV3-D 277 CFQ13W/G24q & CFTR13W/Gx24q 120 1 PRS C213UNVSV3ME 277 120 2 PRS C213UNVSV3ME 277 CFQ18W/G24q & CFTR18W/Gx24q 120 1 PRS C218UNVSV3ME 277 120 2 PRS C218UNVSV3ME 277 CFQ26W/G24q & CFTR26W/Gx24q 120 1 PRS C226UNVSV3ME 277 120 2 PRS C226UNVSV3ME 277 CFTR32W/Gx24q 120 1 PRS C226UNVSV3ME 277 CFTR42W/Gx24q 120 1 PRS C226UNVSV3ME 277 Line Input Power Ballast Min. F/C Current Power Factor Factor THD Start Wiring (Amps) (Watts) (PF) (BF) % Temp Diag. Dim. 0.13 16 > .97 0.85 0.06 16 0.27 32 > .98 0.85 0.12 32 0.18 22 > .98 0.85 0.08 22 0.38 45 > .99 0.85 0.16 44 0.25 0.11 0.48 0.20 30 > .99 0.88 30 57 > .99 0.88 56 0.14 0.06 0.27 0.11 17 > .97 1.00 17 32 1.00 32 > .97 0.27 0.12 0.39 0.17 25 > .95 25 47 46 > .95 0.21 0.10 0.53 0.22 32 > .99 1.00 32 63 > .99 1.00 61 <10 50/10 7 -A <10 50/10 8 -A <10 32/0 7 -D <10 32/0 8 -D <10 50/10 7 -D <10 50/10 8 -D <10 50/10 7 -D <15 32/0 9 C11 <10 32/0 10 C11 1.00 <10 32/0 10 C11 34 > .97 34 1.00 0.35 42 0.15 42 > .98 1.00 STARTING METHOD LEGEND PRS = Programmed Rapid Start <10 50/10 8 -A 1.00 <10 32/0 9 C11 0.26 28 > .96 1.00 0.10 28 0.44 53 > .99 1.00 0.19 53 0.28 0.12 <10 50/10 7 -A 1.01 <10 50/10 8 -D 0.13 16 > .99 1.00 0.06 30 0.25 16 > .99 1.00 0.11 30 20 20 > .99 39 38 > .99 <10 50/10 8 -A 1.01 <10 50/10 7 -D 0.33 40 > .99 1.00 0.14 39 0.17 0.08 0.33 0.15 <10 50/10 7 -A <10 32/0 9 C11 <10 32/0 10 C11 <10 32/0 9 C11 <10 32/0 9 C11 See page 2-22 for Dimensions and Wiring Diagrams PAGE 2-18 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) BallaSTAR 0-10 VOLT DIMMING BALLASTS ® BallaStar® • Analog Dimming • Rapid Start • 1, 2, 3 & 4 Lamp Applications 0-10V DIMMING T8 Straight Lamps FOR (1), (2), (3) & (4) T8 LAMPS Please visit www.unvlt.com for the most up to date status and recent changes to the Ballastar 0-10V product family. T12 U-Shaped Lamps Lamp Starting Line Catalog Qty. Method Volts Number F25T8 - One Lamp Applications B132R347V5 @ 100% 1 347 B132R347V5 @ 5% F32T8 - One Lamp Applications B132R347V5 @ 100% 1 347 B132R347V5 @ 5% F32T8 - Two Lamp Applications B232SR347V5 @ 100% 347 B232SR347V5 @ 5% 2 RS B232SR347V5 @ 100% 347 B232SR347V5 @ 5% F32T8 - Three Lamp Applications B332SR120V5 @ 100% 120 B332SR120V5 @ 5% 3 SER-RS B332SR277V5 @ 100% 277 B332SR277V5 @ 5% F32T8 - Four Lamp Applications B432SR277V5 @ 100% 4 SER/PAR-RS 277 B432SR277V5 @ 5% Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.08 0.02 26 7 > .99 > .90 0.90 0.05 3.46 0.71 < 10 < 30 50/10 50/10 7 7 ST ST 0.09 0.02 32 8 > .99 > .90 0.88 0.05 2.75 0.63 < 10 < 20 50/10 50/10 7 7 ST ST 0.18 0.04 0.18 0.04 62 13 62 13 > .99 > .90 > .99 > .90 0.88 0.05 0.88 0.05 1.42 0.38 1.42 0.38 < 10 < 15 <10 <15 50/10 50/10 50/10 50/10 8 8 8 8 ST ST ST ST 0.77 0.17 0.33 0.07 92 20 92 20 > .99 > .90 > .99 > .90 0.88 0.05 0.88 0.05 0.96 0.25 0.96 0.25 < 10 < 10 < 10 < 15 50/10 50/10 50/10 50/10 17 17 17 17 ST ST ST ST 0.42 0.11 117 27 > .99 > .90 0.88 0.05 0.79 0.19 < 10 < 15 50/10 50/10 16 16 -ZZ -ZZ IS = Instant Start PRS = Programmed Rapid Start RS = Rapid Start See page 2-22 for Dimensions and Wiring Diagrams STARTING METHOD LEGEND PAR-IS = Parallel Instant Start PAR-PRS = Parallel Programmed Rapid Start PAGE 2-19 PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent Dimming All models except B232SR347V5 are cULus Listed B232SR347V5 is CSA Certified BALLASTAR LIGHT LEVEL SWITCHING BallaSTAR® STEP DIMMING BALLASTS FOR (1), (2) & (3) T8 LAMPS • Step Dimming •R apid Start T8 Straight Lamps • 1 -3 Lamp Applications Fluorescent Dimming T12 U-Shaped Lamps Lamp Starting Line Catalog Qty. Method Volts Number F17T8 - One Lamp Applications B232PUS50-A @ 100% 120 B232PUS50-A @ 50% 1 PRS B232PUS50-A @ 100% 277 B232PUS50-A @ 50% F17T8 - Two Lamp Applications B232PUS50-A @ 100% 120 B232PUS50-A @ 50% 2 PRS B232PUS50-A @ 100% 277 B232PUS50-A @ 50% F25T8 - One Lamp Applications B232PUS50-A @ 100% 120 B232PUS50-A @ 50% 1 RS B232PUS50-A @ 100% 277 B232PUS50-A @ 50% F25T8 - Two Lamp Applications B232PUS50-A @ 100% 120 B232PUS50-A @ 50% 2 SER-RS B232PUS50-A @ 100% 277 B232PUS50-A @ 50% F32T8 - One Lamp Applications B232PUS50-A @ 100% 1 RS 120 B232PUS50-A @ 50% B232PUS50-A @ 100% 277 B232PUS50-A @ 50% F32T8 - Two Lamp Applicationswa B232SR120S30 @ 100% 120 B232SR120S30 @ 60% B232SR120S30 @ 30% B232SR277S30 @ 100% 277 B232SR277S30 @ 60% 2 SER-RS B232SR277S30 @ 30% B232PUS50-A @ 100% 120 B232PUS50-A @ 50% B232PUS50-A @ 100% 277 B232PUS50-A @ 50% F32T8 - Three Lamp Applications B332SR120S30 @ 100% 120 B332SR120S30 @ 60% B332SR120S30 @ 30% 3 SER-RS B332SR277S30 @ 100% 277 B332SR277S30 @ 60% B332SR277S30 @ 30% All models are cULus Listed Line Input Power Ballast Ballast Min. F/C Current Power Factor Factor Efficacy THD Start Wiring (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. 0.14 0.08 0.08 0.05 16 9 16 9 > .95 > .95 > .70 > .70 0.88 0.29 0.88 0.29 5.50 3.22 5.50 3.22 < 15 < 15 < 15 < 15 32/0 32/0 32/0 32/0 11 11 11 11 -A -A -A -A 0.25 0.14 0.12 0.07 30 16 30 16 > .99 > .98 > .88 > .85 0.87 0.30 0.87 0.30 2.90 1.88 2.90 1.88 < 10 < 15 < 10 < 15 32/0 32/0 32/0 32/0 12 12 12 12 -A -A -A -A 0.21 0.10 0.11 0.06 24 12 24 12 > .95 > .90 > .80 > .80 0.85 0.28 0.85 0.28 3.54 2.33 3.54 2.33 < 10 < 10 < 10 < 10 32/0 32/0 32/0 32/0 11 11 11 11 -A -A -A -A 0.39 0.20 0.18 0.09 46 24 46 24 > .98 > .95 > .98 > .90 0.84 0.28 0.84 0.28 1.83 1.17 1.83 1.17 < 10 < 10 < 10 < 10 32/0 32/0 32/0 32/0 12 12 12 12 -A -A -A -A 0.25 0.12 0.12 0.06 29 14 29 14 > .99 > .98 > .85 > .80 0.88 0.29 0.88 0.29 3.03 2.07 3.03 2.07 < 10 < 10 < 10 < 20 32/0 32/0 32/0 32/0 11 11 11 11 -A -A -A -A 0.52 0.38 0.24 0.23 0.17 0.11 0.48 0.24 0.21 0.11 62 45 28 62 45 28 57 28 56 28 > .99 > .95 > .95 > .99 > .95 > .95 > .99 > .99 > .95 > .90 0.88 0.58 0.27 0.88 0.58 0.27 0.88 0.30 0.88 0.30 1.42 1.29 0.96 1.42 1.29 0.96 1.54 1.07 1.57 1.07 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 10 50/10 50/10 50/10 50/10 50/10 50/10 32/0 32/0 32/0 32/0 12 12 12 12 12 12 12 12 12 12 ST ST ST ST ST ST -A -A -A -A 0.78 0.61 0.40 0.34 0.26 0.16 93 69 43 94 69 43 > .99 > .95 > .95 > .99 > .95 > .95 0.88 0.60 0.30 0.88 0.60 0.30 0.95 0.87 0.70 0.94 0.87 0.70 < 10 < 10 < 10 < 10 < 10 < 10 50/10 50/10 50/10 50/10 50/10 50/10 15 15 15 15 15 15 ST ST ST ST ST ST See page 2-22 for Dimensions and Wiring Diagrams PAGE 2-20 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) BallaSTAR® STEP DIMMING BALLASTS FOR T5 LAMPS BALLASTAR • Step Dimming • Programmed Rapid Start • 2 Lamp Applications LIGHT LEVEL SWITCHING T5 Straight Lamps All models are cULus Listed IS = Instant Start PRS = Programmed Rapid Start RS = Rapid Start See page 2-22 for Dimensions and Wiring Diagrams STARTING METHOD LEGEND PAR-IS = Parallel Instant Start PAR-PRS = Parallel Programmed Rapid Start PAGE 2-21 PAR-RS = Parallel Rapid Start SER-RS = Series Rapid Start FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent Dimming Lamp Line Input Power Ballast Ballast Min. F/C Starting Line Catalog Current Power Factor Factor Efficacy THD Start Wiring Qty. Method Volts Number (Amps) (Watts) (PF) (BF) Factor (BEF) % Temp Diag. Dim. F14T5 - Lamp Applications B214PU115S50A @ 100% 0.17 21 > .95 1.19 5.90 < 15 50/10 11 -A 120 1 PRS B214PU115S50A @ 50% 0.09 10 > .95 0.40 3.74 < 15 50/10 11 -A B214PU115S50A @ 100% 0.09 21 > .75 1.19 5.80 < 15 50/10 11 -A 277 B214PU115S50A @ 50% 0.05 10 > .75 0.40 3.50 < 15 50/10 11 -A B214PU115S50A @ 100% 0.33 37.5 > .95 1.15 3.10 < 10 50/10 12 -A 120 2 PRS B214PU115S50A @ 50% 0.15 18 > .95 0.40 2.19 < 15 50/10 12 -A B214PU115S50A @ 100% 0.15 37 > .90 1.15 3.11 < 10 50/10 12 -A 277 B214PU115S50A @ 50% 0.08 19 > .85 0.40 2.14 < 15 50/10 12 -A B228PU95S50D @ 100% 0.29 35 > .95 1.00 2.86 < 10 50/10 14 -D 120 2 PRS B228PU95S50D @ 50% 0.13 16 > .95 0.37 2.30 < 10 50/10 14 -D B228PU95S50D @ 100% 0.13 35 > .95 1.00 2.86 < 10 50/10 14 -D 277 B228PU95S50D @ 50% 0.06 16 > .90 0.37 2.29 < 10 50/10 14 -D F21T5 - Lamp Applications B214PU115S50A @ 100% 0.24 29 > .95 1.18 4.09 < 10 50/10 11 -A 120 1 PRS B214PU115S50A @ 50% 0.12 14 > .95 0.39 2.84 < 15 50/10 11 -A B214PU115S50A @ 100% 0.12 29 > .85 1.18 4.06 < 15 50/10 11 -A 277 B214PU115S50A @ 50% 0.62 14 > .85 0.40 2.75 < 15 50/10 11 -A B228PU95S50D @ 100% 0.40 48 > .95 0.99 2.06 < 10 50/10 14 -D 120 2 PRS B228PU95S50D @ 50% 0.18 21 > .95 0.36 1.73 < 10 50/10 14 -D B228PU95S50D @ 100% 0.17 47 > .95 0.99 2.10 < 10 50/10 14 -D 277 B228PU95S50D @ 50% 0.08 22 > .95 0.36 1.65 < 10 50/10 14 -D F28T5 - Lamp Applications B214PU115S50A @ 100% 0.32 38 > .95 1.15 3.02 < 10 120 50/10 11 -A 1 PRS B214PU115S50A @ 50% 0.16 19 > .95 0.45 2.37 < 15 B214PU115S50A @ 100% 0.15 38 > .90 1.15 3.07 < 10 277 50/10 11 -A B214PU115S50A @ 50% 0.08 19 > .85 0.43 2.23 < 15 B228PU95S50D @100% 0.50 58 > .99 0.95 1.64 < 10 120 50/10 14 -D B228PU95S50D @50% 0.23 28 > .99 0.35 1.25 < 20 2 PRS B228PU95S50D @100% 0.21 57 > .98 0.95 1.67 < 10 277 50/10 14 -D B228PU95S50D @50% 0.10 28 > .95 0.35 1.25 < 20 B228PU115S50D @100% 0.59 71 > .99 1.15 1.62 < 10 120 50/10 14 -D B228PU115S50D @50% 0.29 34 > .99 0.45 1.32 < 10 2 PRS B228PU115S50D @100% 0.25 69 > .98 1.15 1.67 < 10 277 50/10 14 -D B228PU115S50D @50% 0.12 34 > .95 0.45 1.32 < 15 º Preliminary Data Black (hot) Black (hot) L N White (neutral) Red Red L N White (neutral) Red Red DIMENSIONS & WIRING Violet (control) Violet (control) DA Blue DA Blue Black (hot) Line S1 S2 L N White (neutral) Red Red L N White (neutral) Red Red Violet (control) Violet (control) Overall Dimensions Draw # L -A -D -C11 ST -ZZ DP1 DP2 DA Blue DA Blue 9.50” 1.70” 16.88” 1.18” 4.94” 3.00” 9.50” 2.40” 16.40” 2.40” 18.00” 1.18” 4.95” Black (hot)2.93” 5 L N White (neutral) 1.18” 1.00” 1.00” 1.55” 1.50” 1.18” 1.38” Red Red Violet (control) DA Blue DA Blue 5 Black Blk/Wht White Neutral Line S1 Black (hot) S2 White (neutral) S1 Line Neutral 8.89” — 16.20” — 4.61” — 8.89” 1.69” 15.88” 1.69” 17.70” — 4.57” — Blue DA Line S1 S2 S2 Blue Red Red Black L Blk/Wht Red Red Ballast Ballast Ballast White Neutral DA Violet (control) Yel Red Yel Red Red Blue Yel Red Blue Yel Yel Blue Yel Blue Blue Ballast NBlack White Blk/Wht Violet (control) Blue DA Blue 6 Black (hot) S1 White Line (neutral) S2 L Black N Blk/Wht 11 11 11 Red Red Ballast 7 Red DIAGRAM 6 Red 7 Black (hot) White (neutral) Red Red Ballast Black (hot) Fluorescent Dimming 7 L N Line S1 Black (hot)S2 L N -A, ST, -ZZ White Violet (control +)(neutral) (+) Gray (control -) (-) Red Red Blue Blue C11, DP2 Ballast Violet (control +) Gray (control -) WIRING DIAGRAMS (+) (-) Violet (control +) Gray (control -) Black (hot) L White (neutral)Violet (control) N (control) Violet 1 L N DA 2 Black (hot) Black (hot) L White (neutral) White (neutral) N Red Red Blue Ballast Violet (control) Violet (control) 2 DIAGRAM 1 DA DA Blue Blue Black (hot) White (neutral) L N 2 Violet (control) Black (hot) L Violet (control) White (neutral) N Violet (control) Violet (control) Red Red Yel Ballast Black (hot) DA Red Blue White DA Blue Violet (control +)(neutral) Red (+) Gray (control -) (-) Yel Ballast Yel L N 3 DIAGRAM 2 Violet (control +) DA Blue Black (hot)Gray L (control -) DA White (neutral) Blue N Black (hot) L White (neutral)Violet (control) N (control) Violet (+) (-) Red Red Ballast Blue Red DA Yel Yel Blue Red Red Blue Yel Ballast Red DA Violet (control) Blue Blue DA Red Red Ballast Yel Yel Violet (control) Black (hot) L Violet (control) White (neutral) N 4 Red Red 5 L Yel Red Blue Blue N Blue Blue Black (hot)Gray (control -) L White (neutral) N 4 Red Red Red DA DIAGRAM 4 DA Violet (control) 6 DA DA Black (hot) White (neutral) Blue Blue L N 6 Ballast Blue Bla Blk/W Wh Neutral Line S1 S2 Bla Blk/W Wh Neutral 815 DIAGRAM 14 Red L N Red Yel Yel 15 Red BlueRed Red/Wht BlueRed Yel Ballast Ballast Yel Red Yel Red/Wht Blue Blue Blue Line Black Neutral White 16 16 16 Red L DIAGRAM 15 Blue N Yel Ballast Blue Red Red/Wht Yel Red 7 Line Bla Neutral Wh Line Bla Wh Neutral Violet (control Ballast Gray (contro Violet (contro Gray (contro BallastYel/Blk Blue Yel Blue/Wht BallastRed/Wht Blue (+) Gray (control Black (hot)-) Violet (control +) L (-) White (neutral) (+) Gray (control -) N (-) Yel Blue Yel/Blk Red/Wht Red Blue/Wht Yel/Blk Red Blue/Wht Black 17 7 10 17 White (neu Ballast DA DA 17 17 17 Yel White Neutral Violet (control +) Gray (control -) Violet (control -) Gray (control -) Violet (control +) Gray (control -) Black (hot) Black (hot) White (neutral) White (neutral) Violet (control +) Violet Gray(control (control+) -) Gray (control -) Blue Blue Yel Yel L N Black (hot) Violet (control L Red+) White (neutral)Violet (control) DA Gray (control N (control) Red-) Violet DA Yel Ballast Yel DA DA 8 (-) 18 L LN N Ballast Ballast (+) (+) (-) (-) 9 Red Red Red Red Yel Yel Yel Line 19 12 9 Red Red Red Red Red Red Yel Ballast Yel Blue Blue Blue Blue Yel Yel Blue Blue Neutral L N W Vio Gr Red W Vio 20 1410 Gr Blue Red Red Red L1 Ballast L2 Black (hot) L Red White White (neutral) DA Violet (control) N N Yel DA Violet (control) Ballast Yel Blk/Wht 20 Violet (control -) Black (hot) L Gray (control -) White (neutral) N Blue Blue (+) Yel Yel Blue Blue Ballast Red Red (-) DIAGRAM 20 Ballast Violet (control) DA Violet (control) DA Red Red Yel Yel Blue Blue Yel Yel Blue Blue FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Red W Red Ballast Black B Blk Yel Blue Blue Blue Blue N (-) S1 S2 Neutral Yel Yel Red Blue Red Red Blue Yel Yel Ballast Ballast Yel Yel Black (hot) L BlueRed White (neutral) Blue N BlueRed Blue Yel Ballast Yel Black (hot) W Yel Blue Blue Blue Blue L DIAGRAM 18Red White (neutral) 20 L Ballast Violet (contr Line Gray S1 (contB Blk S2 Neutral DIAGRAM 17 (-) (+) Black (hot) Line S1 S2 PAGE 2-22 Black (hot) Blue Blue Red Yel Blue Blue Red Red Blue Red Yel Ballast Yel Yel (+) DIAGRAM 19Blue Blue Blue Yel Black White (neu Ballast (+) Gray (control -) Ballast (+) (-) Red Red Red Red Red Yel Red/Wht Yel Ballast Ballast Yel Blue Violet (control +) 13 6 9 Gray (cont 10 18 Ballast White (neutral) Blue Blue Blue Blue Violet (contr Red/Wht Black Line S1 Black Line S1 Violet (control +)L Blk/Wht (+) S2 S2 Blk/Wht Gray (control -)N Neutral White (-) White Neutral Red Red Red Red Yel L N LL NN L (+) N (-) Violet Violet(control (control +) (+) Black -)(hot) (+) L Violet (control Gray (control -) +) Gray (control -) (+) White (neutral) Black (hot) (-)(-) N Gray (control -) L White (neutral) (-) N Yel Yel Violet (controlBlue +) (+) Blue Gray (control -) (-) 6 Violet (control) Yel Red Red Ballast Ballast Yel Yel Black Line S1 S2 Blk/Wht Black (hot) White NeutralBlack (hot)White L (neutral) White (neutral) N Violet (control) Red Red Black (hot) Black (hot) Black LineWhite White(neutral) (neutral) 18 11 Blue Blue White Neutral Red Ballast (+) Blue DIAGRAM 16 (-) Blue Red Violet (control +) -) Black Line Gray (control Red 10 DIAGRAM Ballast Blue Blue Ballast Violet (control) (+) (-) Black (hot) Red Black (hot) Black Line LS1 L White (neutral)Violet (control) DA NS2(control) Red Blk/Wht White (neutral) Violet N DA White Neutral Yel Ballast Black (hot) L White (neutral)Violet (control) N (control) Violet Yel 9 Ballast Blue Blue Yel Ballast Black (hot) Violet (control) WhiteDA (neutral) Violet (control) DA 8 Ballast Violet (control +) DIAGRAM 11 5 DA DA White Black Line L White Neutral N Black LineViolet (control +) L (+) White Neutral Gray (control -) N (-) Red Red/Wht Yel Red Red RedRed/Wht BlueBallast Blue Blue Yel Yel Red Red Violet (control -) Violet (control) L DIAGRAM 3 N Black (hot) L N Yel Blue White (neutral) Blk/Wht Line S1 S2 Yel Red Yel Red Red Blue Yel Red Blue Yel Yel Blue Yel Blue Blue Blue Yel 4 Violet (control) 4 DA Ballast L1 L2 L1 N L2 N Black Line S1 S2 Blk/Wht Violet (control +) White Neutral (+) Gray (control -) (-) Yel Yel Black (hot) L Red Violet (control +)(hot) White (neutral)Violet (control) BlueRed DABlack N (control) Red-) (+) L Blue Gray (control Violet Black Line White (-) N Blue BlueRedRed DA (neutral) Neutral Yel White L Red/Wht Ballast Yel Yel N Ballast Black Line Violet (control) BallastYel Red DA Blue Neutral Violet (control +)White L Violet (control) Red/Wht (+) Blue DA Blue Black Yel Line Red Violet (control Gray (control -) +) (+) (-) N Blue White Neutral Gray (control -) L Red/Wht (-) Ballast Blue N Black (hot) RedYel Violet (control +)L (+) Ballast White(hot) (neutral) Black L -)N Red Red Gray (control Yel (-) WhiteViolet (neutral) Blue (control N +) (+) Red Gray (control -) (-) Ballast Yel Blue Ballast Black +) (hot) Yel Violet (control Red (+)L Blue White Violet Gray (control -)(neutral) (control -) Red (+) (-) N Blue Blue Gray (control -) (-) Blue Yel Ballast Yel Ballast Violet (control) Black Blk/Wht Black White Black (hot) Yel 7 10 10 9 Red Black (hot) Red L Yel N 3 L2 N White S1 Black Line Violet (control Black+)(hot)(+) L S2 -) Blk/Wht GrayWhite (control (neutral)(-) N White Neutral DIAGRAM 9 9 White (neutral) Ballast B Neutral Blue Red Blue Red L1 Blk/Wht White (neutral) Yel Blue Ballast Blue DA Black Ballast Red/Wht (-) 14 14 14 DIAGRAM 12 Blue White Neutral 29 Ballast Red Red Black Line S1 S2 S1 Line Neutral S2 DIAGRAM 8 1 Black (hot) Yel Red RedYel Red RedRed Blue Yel Red BallastYelBlue Ballast Yel Yel Yel Ballast RedBlue Yel Blue Red Blue Blue Blue Ballast Blue Red Red Blue Blk/Wht Neutral 15 DIAGRAM 78 15 15 Blue Line S1 S2 Ballast Ballast Red (+) B Neutral Blue Red Red Black Blk/Wht White Line S1 S2 Blue Ballast Blue Yel Yel Line S1 S2 Ballast Ballast case must be grounded. A star washer or other paint penetrating device is required White (neutral) 12 6 12 12 13 13 White Neutral Ballast Ballast Yel Blue Blue Blk/Wht Line S1 S2 Blue Blue Red Red Yel Yel Red Red Blue Ballast White Neutral Black Line S1 Violet (control) S2 Blk/Wht DA White DA Neutral Violet (control) 8 (+) (-) White Neutral White (neutral) Black Line S1 S2 Blk/Wht S1 (hot) Ballast Black Black Line White Neutral L White (neutral)Blk/Wht Violet (control +)S2 N (+) White Neutral Gray (control -) (-) Black Ballast Black L N Line S1 S2 Black Line S1 Black (hot) L S2 Blk/Wht White S1 (neutral) Black Line N White Neutral S2 Blk/Wht Blue Blue BlueRed BlueRed Blk/Wht White Neutral Ballast Gray (control -) Blk/Wht Blue Violet (control Black+)(hot)(+) L GrayWhite (control -) (neutral) (-) N Violet (control +) 11 Blue Red Red Ballast -D, DP1 Blue Red Red Neutral Line S1 S2 13 13 13 7 L N DA Ballast Yel White Neutral Ballast Yel Black Line S1 Ballast Red Violet (control) S2 Blk/Wht DA Blue Red S1 Black Line Violet (control) White Neutral Red DA Blue Blue S2 Blk/Wht Red Ballast Blue White Neutral Black (hot) White (neutral) Blue Black Neutral Blue DIAGRAM 5 Note: Nominal dimensions provided above Contact Universal for drawings and/or tolerances Ballast Violet (control) DA Violet (control) Mounting Dimensions H M X W Yel Yel Ballast Ballast Violet (control) Violet (control) DA 4 DIMENSIONS AND WIRING DIAGRAMS 11 3 Black (hot) Yel Yel Ballast Ballast Violet (control) VariPRO VariPRO DIMMING BALLASTS 0-10V DIMMING T8 PARALLEL LAMP 1 Line Current (Amps) Input Power (Watts) Power Factor Ballast THD (PF) Factor (BF) % Min. F/C Start Wiring Temp1 Diag. Dim. 0.15 17 0.07 17 0.90 0.87 < 19 32/0 18 -A 0.06 17 0.27 32 0.11 31 0.96 0.87 < 12 32/0 8 -A 0.09 31 0.15 24 0.09 23 0.94 0.87 < 15 32/0 18 -A 0.07 23 0.36 45 0.15 44 0.98 0.87 < 10 32/0 8 -A 0.12 44 0.26 31 0.11 30 0.96 0.88 < 12 32/0 18 -A 0.09 30 0.48 57 0.21 57 0.98 0.87 < 10 32/0 8 -A 0.16 57 0.31 38 0.13 37 0.97 0.87 < 10 32/0 18 -A 0.11 37 0.59 71 0.25 70 0.99 0.87 < 10 32/0 8 -A 0.20 70 0.25 30 0.11 29 0.95 0.87 < 12 60/15 18 -A 0.09 29 0.46 55 0.19 54 0.98 0.87 < 10 60/15 8 -A 0.16 54 0.22 26 0.09 26 0.94 0.87 < 14 60/15 18 -A 0.09 26 0.40 49 0.17 48 0.98 0.87 < 10 60/15 8 -A 0.14 48 0.20 24 0.09 23 0.94 0.87 < 15 60/15 18 -A 0.07 23 0.37 45 0.16 44 0.98 0.87 < 10 60/15 8 -A 0.13 44 A short stabilization period may be needed for temperatures below 10C See page 2-22 for Dimensions and Wiring Diagrams PAGE 2-23 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent Dimming Lamp Starting Line Catalog Qty. Method Volts Number F17T8 120 B232PUSV3PLA 1 PRS 277 B232PUSV3PLA 347 B232P3SV3PLA 120 B232PUSV3PLA 2 PRS 277 B232PUSV3PLA 347 B232P3SV3PLA F25T8 120 B232PUSV3PLA B232PUSV3PLA 1 PRS 277 347 B232P3SV3PLA 120 B232PUSV3PLA 2 PRS 277 B232PUSV3PLA 347 B232P3SV3PLA F32T8 120 B232PUSV3PLA 1 PRS 277 B232PUSV3PLA 347 B232P3SV3PLA 120 B232PUSV3PLA 2 PRS 277 B232PUSV3PLA 347 B232P3SV3PLA F40T8 120 B232PUSV3PLA B232PUSV3PLA 1 PRS 277 347 B232P3SV3PLA B232PUSV3PLA 120 2 PRS 277 B232PUSV3PLA 347 B232P3SV3PLA F32T8 (30W) 120 B232PUSV3PLA B232PUSV3PLA 1 PRS 277 347 B232P3SV3PLA 120 B232PUSV3PLA 2 PRS 277 B232PUSV3PLA 347 B232P3SV3PLA F28T8 120 B232PUSV3PLA 1 PRS 277 B232PUSV3PLA 347 B232P3SV3PLA 120 B232PUSV3PLA 2 PRS 277 B232PUSV3PLA 347 B232P3SV3PLA F30T8 (25W) 120 B232PUSV3PLA 1 PRS 277 B232PUSV3PLA 347 B232P3SV3PLA 120 B232PUSV3PLA 2 PRS 277 B232PUSV3PLA 347 B232P3SV3PLA VariPRO VariPRO DIMMING BALLASTS Fluorescent Dimming 0-10V DIMMING T5 Lamp Starting Line Catalog Qty. Method Volts Number F14T5 120 B228PUSV3PLA 1 PRS 277 B228PUSV3PLA 347 B228P3SV3PLA 120 B228PUSV3PLA 2 PRS 277 B228PUSV3PLA 347 B228P3SV3PLA F21T5 120 B228PUSV3PLA B228PUSV3PLA 1 PRS 277 347 B228P3SV3PLA 120 B228PUSV3PLA 2 PRS 277 B228PUSV3PLA 347 B228P3SV3PLA F28T5 120 B228PUSV3PLA 1 PRS 277 B228PUSV3PLA 347 B228P3SV3PLA 120 B228PUSV3PLA 2 PRS 277 B228PUSV3PLA 347 B228P3SV3PLA F28T5ES (25W) 120 B228PUSV3PLA B228PUSV3PLA 1 PRS 277 347 B228P3SV3PLA B228PUSV3PLA 120 2 PRS 277 B228PUSV3PLA 347 B228P3SV3PLA 1 PARALLEL LAMP Line Current (Amps) Input Power (Watts) Power Factor Ballast THD (PF) Factor (BF) % Min. F/C Start Wiring Temp1 Diag. Dim. 0.17 19 0.07 18 0.93 1.00 < 17 50/10 18 -A 0.06 19 0.30 34 0.13 33 0.97 1.00 < 10 50/10 8 -A 0.11 34 0.23 26 0.10 25 0.95 1.00 < 13 50/10 18 -A 0.09 26 0.42 48 0.18 47 0.98 1.00 < 10 50/10 8 -A 0.15 47 0.29 33 0.13 33 0.97 1.00 < 10 50/10 18 -A 0.11 34 0.56 64 0.24 63 0.99 1.00 < 10 50/10 8 -A 0.19 63 0.27 31 0.12 31 0.96 1.00 < 12 60/15 18 -A 0.09 30 0.51 59 0.22 57 0.99 1.00 < 10 60/15 8 -A 0.17 58 A short stabilization period may be needed for temperatures below 10C See page 2-22 for Dimensions and Wiring Diagrams PAGE 2-24 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) VariPRO VariPRO DIMMING BALLASTS 0-10V DIMMING T5HO PARALLEL LAMP 1 Line Current (Amps) Input Power (Watts) Power Factor Ballast THD (PF) Factor (BF) % Min. F/C Start Wiring Temp1 Diag. Dim. 0.46 54 0.21 56 0.97 1.00 < 10 32/0 18 -D 0.18 58 0.98 116 0.42 112 0.99 1.00 < 10 32/0 8 -D 0.33 109 0.44 52 0.20 53 0.96 1.00 < 10 60/15 18 -D 0.16 54 0.86 102 0.38 101 0.99 1.00 < 10 60/15 8 -D 0.30 101 0.47 58 0.21 58 0.97 0.90 < 10 60/15 18 -D 0.17 57 0.89 109 0.38 105 0.99 0.90 < 10 60/15 8 -D 0.31 108 0.45 54 0.19 53 0.96 0.90 < 10 60/15 18 -D 0.16 56 0.86 105 0.37 103 0.98 0.90 < 10 60/15 8 -D 0.30 105 A short stabilization period may be needed for temperatures below 10C See page 2-22 for Dimensions and Wiring Diagrams PAGE 2-25 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent Dimming Lamp Starting Line Catalog Qty. Method Volts Number F54T5HO 120 B254PUSV3PLD 1 PRS 277 B254PUSV3PLD 347 B254P3SV3PLD 120 B254PUSV3PLD 2 PRS 277 B254PUSV3PLD 347 B254P3SV3PLD F54T5HOES (49W) 120 B254PUSV3PLD B254PUSV3PLD 1 PRS 277 347 B254P3SV3PLD 120 B254PUSV3PLD 2 PRS 277 B254PUSV3PLD 347 B254P3SV3PLD FT55W/2G11 120 B254PUSV3PLD 1 PRS 277 B254PUSV3PLD 347 B254P3SV3PLD 120 B254PUSV3PLD 2 PRS 277 B254PUSV3PLD 347 B254P3SV3PLD FC55T5HO 120 B254PUSV3PLD B254PUSV3PLD 1 PRS 277 347 B254P3SV3PLD B254PUSV3PLD 120 2 PRS 277 B254PUSV3PLD 347 B254P3SV3PLD LevelPRO LevelPRO DIMMING BALLASTS Fluorescent Dimming STEP-DIMMING HIGH BALLAST FACTOR Lamp Starting Line Catalog Qty. Method Volts Number F17T8 120 B232PUS50PLHA 1 PRS 277 B232PUS50PLHA 347 B232P3S50PLHA 120 B232PUS50PLHA 2 PRS 277 B232PUS50PLHA 347 B232P3S50PLHA F25T8 120 B232PUS50PLHA B232PUS50PLHA 1 PRS 277 347 B232P3S50PLHA 120 B232PUS50PLHA 2 PRS 277 B232PUS50PLHA 347 B232P3S50PLHA F32T8 120 B232PUS50PLHA 1 PRS 277 B232PUS50PLHA 347 B232P3S50PLHA 120 B232PUS50PLHA 2 PRS 277 B232PUS50PLHA 347 B232P3S50PLHA F32T8 (30W) 120 B232PUS50PLHA B232PUS50PLHA 1 PRS 277 347 B232P3S50PLHA B232PUS50PLHA 120 2 PRS 277 B232PUS50PLHA 347 B232P3S50PLHA F28T8 120 B232PUS50PLHA B232PUS50PLHA 1 PRS 277 347 B232P3S50PLHA 120 B232PUS50PLHA 2 PRS 277 B232PUS50PLHA 347 B232P3S50PLHA F30T8 (25W) 120 B232PUS50PLHA 1 PRS 277 B232PUS50PLHA 347 B232P3S50PLHA 120 B232PUS50PLHA 2 PRS 277 B232PUS50PLHA 347 B232P3S50PLHA 1 PARALLEL LAMP Line Current (Amps) Input Power (Watts) Power Factor Ballast THD (PF) Factor (BF) % Min. F/C Start Wiring Temp1 Diag. Dim. 0.19 23 0.08 23 0.96 1.15 < 15 32/0 19 -A 0.07 22 0.35 42 0.15 41 0.98 1.15 < 10 32/0 12 -A 0.12 41 0.27 32 0.12 32 0.97 1.15 < 10 32/0 19 -A 0.09 31 0.50 60 0.21 59 0.99 1.15 < 10 32/0 12 -A 0.17 59 0.34 40 0.15 40 0.98 1.15 < 10 32/0 19 -A 0.12 39 0.64 77 0.27 75 0.99 1.15 < 10 32/0 12 -A 0.22 75 0.32 38 0.14 38 0.98 1.15 < 10 60/15 19 -A 0.11 38 0.60 72 0.25 70 0.99 1.15 < 10 60/15 12 -A 0.20 69 0.28 34 0.12 33 0.98 1.15 < 10 60/15 19 -A 0.10 33 0.54 65 0.23 63 0.99 1.15 < 10 60/15 12 -A 0.18 63 0.27 32 0.12 32 0.97 1.15 < 10 60/15 19 -A 0.09 31 0.50 60 0.21 59 0.99 1.15 < 10 60/15 12 -A 0.17 59 A short stabilization period may be needed for temperatures below 10C See page 2-22 for Dimensions and Wiring Diagrams PAGE 2-26 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) LevelPRO LevelPRO DIMMING BALLASTS STEP-DIMMING NORMAL BALLAST FACTOR LIGHT-LEVEL SWITCHING PARALLEL LAMP 1 Line Current (Amps) Input Power (Watts) Power Factor Ballast THD (PF) Factor (BF) % Min. F/C Start Wiring Temp1 Diag. Dim. 0.15 17 0.06 17 0.94 0.87 < 19 32/0 19 -A 0.05 17 0.26 31 0.11 31 0.97 0.87 < 10 32/0 12 -A 0.09 31 0.21 25 0.09 25 0.96 0.87 < 14 32/0 19 -A 0.07 25 0.38 46 0.16 44 0.98 0.87 < 10 32/0 12 -A 0.13 44 0.26 31 0.11 31 0.97 0.88 < 11 32/0 19 -A 0.09 31 0.48 59 0.21 58 0.99 0.87 < 10 32/0 12 -A 0.17 58 0.32 39 0.14 38 0.98 0.87 < 10 32/0 19 -A 0.11 38 0.61 74 0.26 72 0.99 0.87 < 10 32/0 12 -A 0.21 72 0.24 29 0.10 29 0.97 0.87 < 12 60/15 19 -A 0.08 29 0.46 56 0.19 54 0.99 0.87 < 10 60/15 12 -A 0.16 54 0.22 26 0.09 26 0.96 0.87 < 14 60/15 19 -A 0.08 25 0.41 49 0.17 48 0.99 0.87 < 10 60/15 12 -A 0.14 48 A short stabilization period may be needed for temperatures below 10C See page 2-22 for Dimensions and Wiring Diagrams See page 2-20 for Dimensions and Wiring Diagrams PAGE 2-27 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Fluorescent Dimming Lamp Starting Line Catalog Qty. Method Volts Number F17T8 120 B232PUS50PLA 1 PRS 277 B232PUS50PLA 347 B232P3S50PLA 120 B232PUS50PLA 2 PRS 277 B232PUS50PLA 347 B232P3S50PLA F25T8 120 B232PUS50PLA B232PUS50PLA 1 PRS 277 347 B232P3S50PLA 120 B232PUS50PLA 2 PRS 277 B232PUS50PLA 347 B232P3S50PLA F32T8 120 B232PUS50PLA 1 PRS 277 B232PUS50PLA 347 B232P3S50PLA 120 B232PUS50PLA 2 PRS 277 B232PUS50PLA 347 B232P3S50PLA F40T8 120 B232PUS50PLA B232PUS50PLA 1 PRS 277 347 B232P3S50PLA B232PUS50PLA 120 2 PRS 277 B232PUS50PLA 347 B232P3S50PLA F32T8 (30W) 120 B232PUS50PLA B232PUS50PLA 1 PRS 277 347 B232P3S50PLA 120 B232PUS50PLA 2 PRS 277 B232PUS50PLA 347 B232P3S50PLA F28T8 120 B232PUS50PLA 1 PRS 277 B232PUS50PLA 347 B232P3S50PLA 120 B232PUS50PLA 2 PRS 277 B232PUS50PLA 347 B232P3S50PLA LevelPRO LevelPRO DIMMING BALLASTS Fluorescent Dimming STEP-DIMMING NORMAL BALLAST FACTOR Lamp Starting Line Catalog Qty. Method Volts Number F30T8 (25W) 120 B232PUS50PLA 1 PRS 277 B232PUS50PLA 347 B232P3S50PLA 120 B232PUS50PLA 2 PRS 277 B232PUS50PLA 347 B232P3S50PLA F14T5 120 B232PUS50PLA B232PUS50PLA 1 PRS 277 347 B232P3S50PLA 120 B232PUS50PLA 2 PRS 277 B232PUS50PLA 347 B232P3S50PLA F21T5 120 B232PUS50PLA 1 PRS 277 B232PUS50PLA 347 B232P3S50PLA 120 B232PUS50PLA 2 PRS 277 B232PUS50PLA 347 B232P3S50PLA F28T5 120 B232PUS50PLA B232PUS50PLA 1 PRS 277 347 B232P3S50PLA B232PUS50PLA 120 2 PRS 277 B232PUS50PLA 347 B232P3S50PLA F28T5ES (25W) 120 B232PUS50PLA B232PUS50PLA 1 PRS 277 347 B232P3S50PLA 120 B232PUS50PLA 2 PRS 277 B232PUS50PLA 347 B232P3S50PLA 1 LIGHT-LEVEL SWITCHING PARALLEL LAMP Line Current (Amps) Input Power (Watts) Power Factor Ballast THD (PF) Factor (BF) % Min. F/C Start Wiring Temp1 Diag. Dim. 0.21 25 0.09 25 0.96 0.87 < 14 60/15 19 -A 0.07 25 0.38 46 0.16 44 0.98 0.87 < 10 60/15 12 -A 0.13 44 0.16 19 0.07 19 0.94 1.00 < 17 50/10 19 -A 0.06 19 0.30 34 0.13 34 0.98 1.00 < 10 50/10 12 -A 0.10 34 0.23 26 0.10 26 0.96 1.00 < 12 50/10 19 -A 0.08 26 0.42 49 0.18 48 0.99 1.00 < 10 50/10 12 -A 0.14 48 0.29 34 0.12 33 0.97 1.00 < 10 50/10 19 -A 0.10 33 0.56 65 0.24 63 0.99 1.00 < 10 50/10 12 -A 0.19 63 0.26 30 0.11 30 0.97 1.00 < 12 60/15 19 -A 0.09 29 0.51 59 0.25 58 0.97 1.00 < 10 60/15 12 -A 0.17 58 A short stabilization period may be neede See page 2-22 for Dimensions and Wiring Diagrams PAGE 2-28 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Notes Fluorescent Dimming PAGE 2-29 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Compact Fluorescent Ballasts The Courage To Dream Small Universal Lighting Technologies (“Universal”) offers a full range of electronic programmed start compact fluorescent ballasts to address most commercial applications. Our electronic models offer high efficiency for maximum energy savings and installer-friendly universal input voltage, which reduces your inventory and ensures that you have the right voltage ballast every time. A complete range of 347 volt models are also available that offer outstanding reliability and lamp performance. These models feature a low profile case that fits in any fixture. And their metal housing construction meets all plenum codes and delivers maximum heat transfer to extend ballast life. Compact Fluorescent Our compact fluorescent models offer installer-friendly universal input voltage. Universal Lighting Technologies is a member of the Panasonic Group Product Overview Triad® Electronic CFL Ballasts: • High efficiency for maximum energy savings. • Universal input voltage of 120-277V. Installer friendly universal input voltage, which reduces inventory and ensures that you have the right voltage ballast every time. • Complete range of 347 volt CFL models that offer outstanding reliability and lamp performance. • Programmed Rapid Startiting (PRS) incorporated. PRS is recommended by all lamp manufacturers. Increases lamp life for those frequently switched applications where occupancy sensors are used. Meets all requirements of rapid start specs and more. • Metal can construction. Metal housing construction meets all plenum codes and construction code requirements. It also delivers maximum heat transfer to extend ballast life. Designed and manufactured for long life. • Meets all applicable regulatory and safety standards. ANSI C82.11 Ballast Specification, UL 935, FCC Part 18 (Class A), and UL2043 suitable for Air Handling spaces. • 1- or 2- lamp operation of multiple lamp applications. Multiple lamp options on each ballast for added versatility in applications. • THD<10% • Type CC and Type HL (hazardous locations) rated. Type CC is an anti-arcing feature that is used to reduce arcing caused by loose connections or improper lamp-pin to lampholder contact. The Type CC feature senses this arcing and shuts down the ballastt to prevent damage. • Dual entry color coded wire trap terminals. For wiring accuracy and ease of installation. • Low profile form case fits in any fixture. Use for surface or junction box mounting. Small size means less wasted space than full alternative. • End of lamp life shutdown circuit. Meets ANSI/NEMA requirements. Allows you to replace failed lamps without turning off power. • 75° C Temperature Test point. Maximum Case Temperature of 75° C allows for easy ballast/fixture testing, assuring proper temperature application. • Lamp proximity. Lamps can be mounted in close proximity to these ballasts due to no temperature critical components near the can sides. And, their circuit board potting enhances reliability by lowering case temperatures. • Warranty. Backed by Triad® five year warranty. Compact Fluorescent CFL Replacement Kits The multi-exit ballast lead wire connectors accommodate side and bottom lead exit requirements. The snap mount adapter plate adds bottom-exit studs and additional flexibility for replacement of older magnetic ballasts. They also fit virtually every j-box cover and fixture application. This product is for distribution sale only. Mult-E Kit products: C213UNVME000K C218UNVME000K C2642UNVME000K C213/347ME001K C218/347ME001K C2642/347ME001K Mult-E Kit contains: • Multi-exit ballast for use in both side-exit and bottom-exit replacement applications. • Snap-mount adapter plate speeds up installation time. No hardware required for attaching snap-mount adapter plate. • Lead wire set • Wire extraction tool • Instructions FOR MORE INFORMATION CALL PAGE 3-2 1-800-BALLAST (225-5278) Understanding Compact Fluorescent Technology Compact fluorescent (CFL) lamps are single-ended and plug into sockets. They’re sometimes referred to as “single-based” or “single-ended” fluorescent lamps. Lamp Shapes Today’s CFL lamps come in these basic shapes: twin tube, quad, triple, multi, square and circular. Each of these shapes has its own subset of sizes. For example, the twin tube may range from 4˝ long (5 watt) to 22˝ long (40 watt). OR OR Long Twin T5, 4-Pin 5w – 80w Twin, 2-Pin 5w – 13w OR 2-Pin 4-Pin Quad 9w – 27w Square (2D) 10w – 55w Lamp Bases There are a variety of lamp bases used with today’s CFL lamps. This provides a safeguard to make sure that the proper lamp/ballast combination is installed. The lamp base style is part of the ANSI/NEMA designation. In this catalog, Universal CFL ballasts are classified according to lamp type. Icons representing each lamp type provide a quick visual reference. Within each classification, the lamps and their appropriate ballasts can be found by referring to the generic NEMA lamp descriptions. Lamp Designation There are two different industry-recognized nomenclatures for identifying CFL lamps: ANSI Lamp Designations and NEMA Lamp Designations. Here are examples of each: ANSI Designation 13W / 7T4 / T / GX23 / PH Lamp Wattage Multiple, 4-Pin (GE & OSI) 18w – 70w Multiple, 4-Pin (Philips) 18w – 42w T5 Circular 22w - 55w Lamp Diameter 1/8˝ Base Starting: PH – Preheat RS – Rapid Start CFT 13W / GX23 Twin (T) Quad (Q) Multi (M) 2D (S) Lamp Wattage Base Both lamp designations refer to lamp wattage, shape, and base type. Since the NEMA designation is shorter, it will probably be the nomenclature of choice in the future. All of the major lamp companies have trade names for various CFL lamp types, such as GE’s “Biax” and “2D” lamps, OSI’s “Dulux,” and Philips’ “PL”. These names have become more widely used than either of the industry designations. GE OSI Philips Low Watt Biax Dulux S, S/E PL-S Double Biax Dulux D, D/E PL-C Biax T/E Dulux T, T/E, T/E/IN PL-T Biax Q/E Dulux T/E/IN PL-T High Lumen Biax Dulux L, F PL-L 2D –– –– — Pentron Silhouette FOR MORE INFORMATION CALL PAGE 3-3 1-800-BALLAST (225-5278) Compact Fluorescent Industry Watts Single or Twin 5, 7, 9, 13 Double or Quad 9, 13, 18, 20, 26, 27 Multiple 13, 18, 26, 32, 42 Multiple 42, 57, 70 Long Twin T5 18, 24/27, 36/39, 40, 50, 80 Square 10, 16, 21, 28, 38, 55 Circline 22, 40, 55 Twin (T) Quad (Q) Multi (M) 2D (S) NEMA Designation Pins and Starters CFL lamps feature either two pins or four pins. Four-pin lamps are traditionally powered by electronic ballasts. These lamps do not have an internal starter, so the other filament terminals (pins) are made accessible for external connection to the ballasts. Lamp Length Configurations Electronic Bottom Exit (BE) Electronic Multi-Exit with Studs (MES) Compact Fluorescent Electronic Multi-Exit (ME) FOR MORE INFORMATION CALL PAGE 3-4 1-800-BALLAST (225-5278) Lamp Matrix ANSI Lamp Designation NEMA Lamp Built-In LAMP MANUFACTURER Designation Starter GE OSI Philips 5W/4T4/T/G23/PH CFT5W/G23 7W/5T4/T/G23/PH CFT7W/G23 9W/6T4/T/G23/PH CFT9W/G23 13W/7T4/T/GX23/PH CFT13W/GX23 YES YES YES YES F5 BX F7 BX F9 BX F13 BX CF 5DS CF 7DS CF 9DS CF 13DS PL-S 5W PL-S 7W PL-S 9W PL-S 13W 9W/4T4/Q/G23-2/PH 13W/5T4/Q/GX23-2/PH CFQ9W/G23 CFQ13W/GX23 YES YES F9 DBX23 F13 DBX23 CF 9DD CF 13DD — PL-C 13W/USA 13W/6T4/Q/G24d-1/PH 18W/7T4/Q/G24d-2/PH 26W/8T4/Q/G24d-3/PH CFQ13W/G24d CFQ18W/G24d CFQ26W/G24d YES YES YES F13 DBX T4 F18 DBX T4 F26 DBX T4 — CF 18DD CF 26DD PL-C 13W PL-C 18W PL-C 26W 13W/6T4/Q/G24q-1 18W/7T4/Q/G24q-2 26W/8T4/Q/G24q-3 CFQ13W/G24q CFQ18W/G24q CFQ26W/G24q NO NO NO F13 DBX/4P F18 DBX/4P F26 DBX/4P CF 13DD/E CF 18DD/E CF 26DD/E PL-C 13W/4P PL-C 18W/4P PL-C 26W/4P 10W/3.5T4/S/GR10q-4 16W/5.5T4/S/GR10q-4 21W/5.5T4/S/GR10q-4 28W/8T6/S/GR8-2/PH 28W/8T6/S/GR10q-4 38W/8T6/S/GR10q-4 55W/8T6/S/GRY10q-3 CFS10W/GR10q CFS16W/GR10q CFS21W/GR10q CFS28W/GR8 CFS28W/GR10q CFS38W/GR10q CFS55W/GRY10q NO NO NO YES NO NO NO F10 2D/4P F16 2D/4P F21 2D/4P F28 2D F28 2D/4P F38 2D/4P F55 2D/4P — — — — — — — — — — — — — — 20W/6T5/Q/GX32d-2/PH 27W/7T5/Q/GX32d-3/PH CFQ20W/GX32d CFQ27W/GX32d YES YES — — — — PL-C 15MM/22W PL-C 15MM/28W CFT13W/2GX7 NO — Twin, 2-Pin Quad, 2-Pin Quad, 2-Pin OR Quad, 4-Pin Square, (2D) T5 Quad, 2-Pin 13W/6T4/T/2GX7 CF 13DS/E — Twin T4, 4-Pin 18-20W/9T5/T/2G11/PH-RS FT18W/2G11 NO F18 BX FT 18DL — 18W/10T5/T/2G11/RS FT18W/2G11/RS NO F18 BX/RS FT 18DL/RS PL-L 18W 18W/5T5/T/2G10 CFM18W/2G10 NO — CF 18DF — 24-27W/13T5/T/2G11/PH-RS FT24W/2G11/RS NO F27 BX/RS FT 24DL PL-L 24W 24W/7T5/T/2G10 CFM24W/2G10 NO — CF 24DF — 36-39W/16T5/T/2G11/PH-RS FT36W/2G11/RS NO F39 BX/RS FT 36DL PL-L 36W 36W/9T5/T/2G10 CFM36W/2G10 NO — CF 36DF — 40W/22T5/T/2G11/RS FT40W/2G11/RS NO F40 BX/RS FT 40DL/RS PL-L 40W/RS 50W/22T5/T/2G11/RS FT50W/2G11/RS NO F50 BX/RS — PL-L 50W/RS 55W/21T5/T/2G11 FT55W/2G11 NO F55 BX FT 55DL — 80W/22T5/T/2G11 FT80W/2G11 NO — — PL-L 80W Long Twin T5, 4-Pin 18W/5T4/M/GX24d-2 CFM18W/GX24d YES — CF 18DT — 26W/6T4/M/GX24d-3 CFM26W/GX24d YES — CF 26DT — 13W/5T4/M/GX24q-1 18W/5T4/M/GX24q-2 26W/6T4/M/GX24q-3 32W/6T4/M/GX24q-3 42W/7T4/M/GX24q-4 57W/7T4/M/GX24q-5 70W/8T4/M/GX24q-6 CFM13W/GX24q CFM18W/GX24q CFM26W/GX24q CFM32W/GX24q CFM42W/GX24q CFM57W/GX24q CFM70W/GX24q NO NO NO NO NO NO NO F13 TBX/4P F18 TBX/4P F26 TBX/4P F32 TBX/4P/EOL F42 TBX/4P/EOL F57 QBX/4P/EOL F70 QBX/4P/EOL CF 13DT/E CF 18DT/E/IN CF 26DT/E/IN CF 32DT/E/IN CF 42DT/E/IN CF 57DT/E/IN — — PL-T 18W/4P PL-T 26W/4P PL-T 32W/4P PL-T 42W/4P — — FPC22 FPC40 FPC55/HO FC9T5 22W FC12T5 40W FC12T5 55W Multiple, 4-Pin — — — FC9T5-22W/2GX13 NO — FC12T5-40W/2GX13 NO — FC12T5-55W/2GX13 NO — T5 Circular, 4-Pin FOR MORE INFORMATION CALL PAGE 3-5 1-800-BALLAST (225-5278) Compact Fluorescent Multiple, 2-Pin Specifications TYPICAL SPECIFICATIONS FOR ELECTRONIC COMPACT FLUORESCENT BALLASTS: • Ballasts shall be constructed of metal housing to meet plenum and construction code requirements while providing maximum heat transfer without extra grounding wires for extended ballast life. • Ballasts shall be constructed using dual entry color coded wire trap terminals for wiring accuracy and ease of installation. • Ballasts shall be Programmed Start. • Ballasts shall have a minimum Rh/Rc of 4.25 each time the lamps are started. • Ballasts shall have a maximum ionization current (Glow Current) of 25 milliamps during preheating interval. • Ballasts shall operate from 50/60 Hz input source of 120 through 277 Volts, and sustained variations of ± 10% (Voltage & Frequency) with no damage to the ballasts. • Ballasts shall be a high frequency electronic type, and operate lamps at a frequency above 50 kHz to minimize interference with infrared control systems. • Ballasts shall have a minimum starting temperature of 0°F (-18°C) for the primary lamp application. • Ballasts shall tolerate operation in ambient temperatures up to 140°F (55°C) without damage. • Ballasts shall have a maximum case temperature test point of 75°C printed on the label for easy fixture testing and trouble shooting. • Ballasts shall support 12’ lead length remote mounting for the primary lamp. • Ballasts shall comply with FCC Part 18 Non-Consumer Equipment for EMI (power line conducted) and RFI (radiated). • Ballasts shall provide transient immunity as recommended by ANSI C82.11-2011. • Ballasts shall incorporate end of lamp life shutdown circuitry for end of lamp life protection. • Ballasts shall allow for re-lamping without the need to cycle power. • Ballasts shall operate lamps with no visible flicker (<3% flicker index). • Ballasts shall tolerate sustained open and short circuit output conditions without damage. • Ballasts shall be Underwriters Laboratory (UL 935) listed, Class P, Type 1 Outdoor and/or CSA certified for both US and Canadian application. • Ballasts shall be UL 935 Type CC rated to reduce arcing caused by loose connections or improper lamp-pin to lampholder contact. • Ballasts shall be UL 2043 certified for use in plenums and marked on label as “Suitable for Air Handling Spaces”. • Ballasts shall be quiet Class A sound rating. • Ballasts shall have a Ballast Factor for primary lamp application greater than .95 per ANSI C82.11-2011. Compact Fluorescent • Input current Total Harmonic Distortion shall not exceed 10% for the primary lamp. • Ballasts shall have a Power Factor greater than .98 for the primary lamp application. • Lamp Current Crest Factor (ratio of peak to RMS current) shall be 1.7 or less in accordance with lamp manufacturer recommendation and ANSI C82.11-2011. • The ballasts shall not have any PCB’s. • The manufacturer shall provide written warranty against defects in material or workmanship, including replacement, for five years from date of manufacture. • Manufacturer shall have been manufacturing electronic ballasts for at least thirty years. • Ballasts shall be manufactured in an ISO 9001 / ISO 9002 Certified Facility in North America. • Ballasts shall be manufactured by Universal Lighting Technologies. FOR MORE INFORMATION CALL PAGE 3-6 1-800-BALLAST (225-5278) Understanding Universal Part Numbers ELECTRONIC Our nomenclature for electronic CFL ballasts follows the system already in place for other Universal electronic ballasts. The exceptions are that the model number prefix for compact fluorescent is a C rather than a B. Example:Electronic C240PUNVHP-BOOOC Ballast Type: C — CFL Electronic Ballast Lamp Qty: 2 Lamp Type: 40W TT5, 4 Pin (FT40W/2611) P: Programmed Start Voltage: UNV 120 to 277 volts HP-B: High Performance <10%; low profile can 000: Color—Black C: Packaging container style—Carton Pack Lamp Wattage UNV or 347V Color: 001 - White 000 - Black CXXX XX XXX XXX XXX X # of SR -Series, lamps Rapid Start P - Programmed Start BE - Bottom Exit ME - Multi Exit MES - Multi Exit with Studs 120V, 277V 347V, UNV Lamp Wattage* (120-277) Color: 001 - White 000 - Black CXXX X XXX XXX XXX # of lamps No suffix - P P - Programmed Start I - Instant Start C -Carton T -Tray Pack I -Individual K -Replacement Mult-E Kit X BE - Bottom Exit ME -Multi Exit MES -Multi Exit with Studs HP-B - Low Profile RH - Reduced Harmonics C -Carton T -Tray Pack I -Individual K -Replacement Mult-E Kit Example: C213UNVMES000C* Ballast Type: C Lamp Quantity: 2 Lamp Type: 13W Quad, 4 Pin (CFQ13W/G24q) Voltage: UNV 120 to 277 volts MES: Multi-exit connection, with studs 000C: Color—Black C: Packaging container style—Carton Pack *Exception is C2642, which does not distinguish number of lamps. See catalog. Compact Fluorescent FOR MORE INFORMATION CALL PAGE 3-7 1-800-BALLAST (225-5278) Compact Fluorescent Notes FOR MORE INFORMATION CALL PAGE 3-8 1-800-BALLAST (225-5278) MAGNETIC AND ELECTRONIC COMPACT FLUORESCENT BALLASTS FOR TWIN, QUAD AND MULTIPLE LAMPS 13-26 WATTS QUICK REFERENCE Nominal lamp watts and configuration Lamp Type 13 Watts CFT13W/GX23 OR CFQ13W/GX23 Lamp Type 13 Watts CFQ13W/G24q OR CFM13W/GX24q OR OR Lamp Type 13 Watts CFT13W/2GX7 Lamp Type 18 Watts CFQ18W/G24q OR CFM18W/GX24q Lamp Type 26 Watts CFQ26W/G24q OR CFM26W/GX24q OR OR Twin or Quad, 2-Pin U.S. type • Ideal for downlights & wall sconces • E lectronic models feature universal input voltage from 120V to 277V. 347V models are also available. • E lectronic models feature programmed start for excellent lamp performance & auto reset shutdown circuit 13-26 WATTS Lead Configuration Mag Qty Line Starting Min Start or of Line Catalog Input Current Current Ballast Temp Power Side Multi Multi Starting Wir Elec Lamps Volt Number Watts Amps Amps Factor (F/C) Factor THD Exit Exit Exit Studs Method✿ Dim Diag Electrical Characteristics - 60 Hz ❍ M 1 120 CF1320H2P ■ 16 0.24 0.30 0.85 25°/-4° >.50 <15% X — — PH B10 1 ■H 2 indicates clamped & covered core & coil with mounting feet. ◆ Add following suffix for complete catalog #: “BE” for Bottom Exit connectors, “ME” for Multi Exit connectors, or “MES” for Multi Exit with 2” OC screw studs. ❍ Not approved for use in hazardous locations. rAdd “000K” suffix for Mult-E Kit. For Distribution only. ✱ Add “001K” suffix for Mult-E Kit. For Distribution only. PAGE 3-9 All ballasts are UL listed, CSA approved and designated Class P (thermally protected). See page 3-11 for Dimensions and Wiring Diagrams. FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Compact Fluorescent 120 0.15 >.98 <10% E 1 C213UNVMEr 18 —— 1.00 0°/-18° X X PS C3 3 277 0.07 >.95 <15% Quad or 120 0.26 Multiple, E 2 C213UNVMEr 30 —— 1.00 0°/-18° >.98 <10% X X PS C3 4 4-Pin 277 0.11 1 18 0.06 —— 1.00 3 E 347 C213/347ME✱ 0°/-18° >.98 <10% X X PS C3 2 33 0.10 —— 0.98 4 120 0.12 <10% E 1 CT213UNVME 15 —— 0.98 0°/-18° >.98 X X PS C3 3 277 0.06 <12% Twin T4, 4-Pin 120 0.22 E 2 CT213UNVME 26 —— 0.98 0°/-18° >.98 <10% X X PS C3 4 277 0.10 120 0.16 >.98 <10% E 1 C218UNV ◆r 19 —— 1.00 0°/-18° X X PS C3 3 277 0.07 >.95 <15% Quad or 120 0.30 Multiple, 4-Pin E 2 C218UNV◆r 35 —— 0.95 0°/-18° >.98 <10% X X PS C3 4 277 0.13 1 21 0.06 —— 1.00 3 E 347 C218/347ME✱ 0°/-18° >.98 <10% X X PS C3 2 38 0.11 —— 0.98 4 120 0.25 E 1 C2642UNV◆r 28 —— 1.02 0°/-18° >.98 <10% X X PS C3 3 Quad or 277 0.11 Multiple, 120 0.47 4-Pin E 2 C2642UNV◆r 56 —— 0.98 0°/-18° >.98 <10% X X PS C3 4 277 0.21 1 31 0.09 —— 1.02 3 E 347 C2642/347ME✱ 0°/-18° >.98 <10% X X PS C3 2 57 0.17 —— 0.98 4 120 56 0.46 E 2 C242UNV◆ —— 1.02 0°/-18° >.95 <10% X X PS C4 4 277 55 0.20 E 2 347 C242/347ME 44 0.14 —— 1.02 0°/-18º >.98 <10% X X PS C4 4 ✿ PH = Preheat; PS = Programmed Start OR TWIN, QUAD & MULTIPLE LAMPS • Ideal for downlights, surface mount & outdoor fixtures • E lectronic models feature universal input voltage from 120V to 277V. 347V models are also available. • E lectronic models feature programmed start for excellent lamp performance & auto reset shutdown circuit MULTIPLE LAMPS 32, 42, 57 & 70 WATTS QUICK REFERENCE Nominal lamp watts and configuration Lamp Type 32 Watts CFM32W/GX24q Multiple, 4-Pin Lamp Type 42 Watts CFM42W/GX24q Multiple, 4-Pin Lamp Type 57 Watts CFM57W/GX24q Multiple, 4-Pin Compact Fluorescent Lamp Type 70 Watts CFM70W/GX24q ELECTRONIC COMPACT FLUORESCENT BALLASTS FOR MULTIPLE LAMPS 32, 42, 57 & 70 WATTS Lead Configuration Mag Qty Line Starting Min Start or of Line Catalog✪ Input Current Current Ballast Temp Power Side Multi Multi Starting Wir Elec Lamps Volt Number Watts Amps Amps Factor (F/C) Factor THD Exit Exit Exit Studs Method✿ Dim Diag Electrical Characteristics - 60 Hz 120 0.30 E 1 C2642UNV◆r 36 —— 1.00 0°/-18º >.98 <10% X X PS C3 3 277 0.13 ✱ E 1 347 C2642/347ME 36 0.11 —— 0.98 0°/-18º >.98 <10% X X PS C3 3 120 69 0.58 E 2 C242UNV◆ —— 1.00 0°/-18º >.98 <10% X X PS C4 4 277 67 0.26 E 2 347 C242/347ME 62 0.19 —— 1.00 0°/-18º >.98 <10% X X PS C4 4 120 0.41 E 1 C2642UNV ◆r 48 —— 0.98 0°/-18º >.98 <10% 277 0.18 E 1 347 C2642/347ME✱ 50 0.15 —— 1.00 0°/-18º >.98 <10% 120 0.40 E 1 C242UNV◆ 45 —— 1.00 0°/-18º >.93 <10% 277 0.18 120 91 0.76 E 2 C242UNV ◆ —— 0.98 0°/-18º >.98 <10% 277 90 0.32 E 1 347 C242/347ME 42 0.13 —— 1.00 0°/-18º >.98 <10% E 2 347 C242/347ME 80 0.25 —— 0.98 0°/-18º >.98 <10% 120 58 0.52 E 1 C242UNV ◆ —— 1.00 0°/-18º >.98 <10% 277 57 0.21 E 1 347 C242/347ME 61 0.18 —— 1.00 0°/-18º >.98 < 10% 120 73 0.61 >.98 E 1 C242UNV ◆ —— 1.00 0°/-18º <10% 277 72 0.27 >.95 E 1 347 C242/347ME 74 0.21 —— 1.00 0°/-18º >.98 < 10% X X PS C3 3 X X PS C3 3 X X PS C4 3 X X PS C4 4 X X X X PS C4 3 PS C4 4 X X PS C4 3 X X PS X X PS C4 3 X X PS C4 3 C4 3 Multiple, 4-Pin ✿ PS = Programmed Start ◆ Add following suffix for complete catalog #: “BE”suffix for Bottom Exit connectors, “ME” for multi-exit connectors, or “MES” for multi exit connectors with 2” O.C. screw studs. rAdd “000K” suffix for Mult-E Kit. For Distribution only. ✱ Add “001K” suffix for Mult-E Kit. For Distribution only. All ballasts are UL listed, CSA approved and designated Class P (thermally protected), Type HL. See page 3-11 for Dimensions and Wiring Diagrams. FOR MORE INFORMATION CALL PAGE 3-10 1-800-BALLAST (225-5278) TWIN, TRIPLE, QUAD & MULTIPLE LAMPS MAGNETIC AND ELECTRONIC COMPACT FLUORESCENT BALLASTS WIRING DIAGRAMS AND DIMENSIONS REFERENCE DRAWING FOR B10 C WIRING DIAGRAMS F A Install in accordance with National Electrical Code. G B D E Dwg. A B D E B10 1.48” 1.30” 2.68” 3.08” Black Leadless-Poke-in wire connection Black Line REFERENCE DRAWING FOR C3 C Black BALLAST White Green BALLAST Red Red Blue Blue DIAGRAM 3 DIAGRAM 1 Ballast should be grounded F A G B D E Dwg. A B C D E F G Black C3 2.31” 1.00” 4.25” 4.61” 4.94” 0.98” 1.00” White Green Leadless-Poke-in wire connection BALLAST Red Red Yellow Yellow Blue Blue DIAGRAM 4 Series lamp operation Ballast should be grounded REFERENCE DRAWING FOR C4 A B C D E F G Compact Fluorescent Dwg. C4 2.98” 1.00” 4.25” 4.61” 4.94” 1.55” 1.00” Leadless-Poke-in wire connection Note: Nominal dimensions provided above Contact Universal for drawings and/or tolerances PAGE 3-11 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) 2D LAMPS • Ideal for surface mount fixtures •U niversal input voltage from 120V to 277V. 347V models are also available. • P rogrammed start for excellent lamp performance & auto reset shutdown circuit 10, 16 & 21 WATTS 10, 16 AND 21 WATTS QUICK REFERENCE Nominal lamp watts and configuration Lamp Type 10 Watts CFS10W/GR10q 2D, 4-Pin Lamp Type 16 Watts CFS16W/GR10q 2D, 4-Pin Lamp Type 21 Watts CFS21W/GR10q 2D, 4-Pin Compact Fluorescent ELECTRONIC COMPACT FLUORESCENT BALLASTS FOR 2D LAMPS Lead Configuration Mag Qty Line Starting Min Start or of Line Catalog✪ Input Current Current Ballast Temp Power Side Multi Multi Starting Wir Elec Lamps Volt Number Watts Amps Amps Factor (F/C) Factor THD Exit Exit Exit Studs Method✿ Dim Diag Electrical Characteristics - 60 Hz 120 0.12 >.98 <10% E 1 C213UNVMEr 15 —— 1.02 0°/-18º — X X PS C3 2a 277 0.06 >.95 <15% 120 0.22 >.98 <10% E 2 C213UNVMEr 26 —— 1.02 0°/-18º — X X PS C3 3a 277 0.10 >.95 <15% ✱ E 1 347 C213/347ME 16 0.05 —— 1.02 0°/-18º >.95 <10% — X X PS C3 2a E 2 347 C213/347ME✱ 28 0.08 —— 1.02 0°/-18º >.95 <10% — X X PS C3 3a E 1 E 1 E 2 E 2 120 0.15 C213UNVMEr 19 —— 0.95 0°/-18º 277 0.07 ✱ 347 C213/347ME 20 0.06 —— 0.95 0°/-18º 0.28 120 —— 0.95 0°/-18º C213UNVMEr 33 277 0.12 347 C213/347ME✱ 34 0.10 —— 0.95 0°/-18º >.98 <10% — >.95 <15% >.98 <10% — >.98 <10% — >.95 >.98 <10% — 120 0.18 E 1 C218UNV◆r 24 —— 0.98 0°/-18º 277 0.08 ✱ E 1 347 C218/347ME 21 0.06 —— 0.98 0°/-18º 120 0.37 E 2 C218UNV◆r 43 —— 0.95 0°/-18º 277 0.16 E 2 347 C218/347ME✱ 39 0.12 —— 0.95 0°/-18º >.98 <10% — >.95 <15% >.98 <10% — >.98 <10% — >.95 <15% >.98 <10% — ✿ PS = Programmed Start ◆ Add following suffix for complete catalog #: “BE” for Bottom Exit connectors, "ME" for Multi Exit connectors, or "MES" for Multi Exit with 2" OC screw studs. rAdd “000K” suffix for Mult-E Kit. For Distribution only. ✱ Add “001K” suffix for Mult-E Kit. For Distribution only. X X PS C3 2a X X PS C3 2a X X PS C3 3a X X PS C3 3a X X PS C3 2a X X PS C3 2a X X PS C3 3a X X PS C3 3a All ballasts are UL listed, CSA approved and designated Class P (thermally protected), Type HL. See page 3-14 for Dimensions and Wiring Diagrams. PAGE 3-12 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) ELECTRONIC COMPACT FLUORESCENT BALLASTS FOR 2D LAMPS QUICK REFERENCE Nominal lamp watts and configuration Lamp Type 28 Watts CFS28W/GR10q 2D, 4-Pin Lamp Type 38 Watts CFS38W/GR10q 2D LAMPS • Ideal for surface mount fixtures •U niversal input voltage from 120V to 277V. • Programmed start for excellent lamp performance & auto reset shutdown circuit 28 & 38 WATTS Lead Configuration Mag Qty Line Starting Min Start or of Line Catalog✪ Input Current Current Ballast Temp Power Side Multi Multi Starting Wir Elec Lamps Volt Number Watts Amps Amps Factor (F/C) Factor THD Exit Exit Exit Studs Method✿ Dim Diag Electrical Characteristics - 60 Hz 120 0.27 E 1 C2642UNV◆✱ 31 —— 0.95 0°/-18º >.95 <10% — X X PS C3 2a 277 0.12 ✱ E 1 347 C2642/347ME 33 0.10 —— 0.95 0°/-18º >.95 <10% — X X PS C3 2a 120 64 0.54 ◆ E 2 C242UNV —— 1.00 0°/-18º >.97 <10% — X X PS C4 3a 277 63 0.24 E 2 347 C242/347ME 60 0.18 —— 1.00 0°/-18º >.98 <10% — X X PS C4 3a 120 0.27 E 1 C2642UNV◆r 33 —— 0.80 0°/-18º 277 0.12 ✿ PS = Programmed Start ◆ Add following suffix for complete catalog #: “BE” for Bottom Exit connectors, “ME” for Multi Exit connectors, or “MES” for Multi E xit with 2” OC screw studs. rAdd “000K” suffix for Mult-E Kit. For Distribution only. 2D, 4-Pin ✱ Add “001K” suffix for Mult-E Kit. For Distribution only. >.95 <10% — X X PS C3 2a All ballasts are UL listed, CSA approved and designated Class P (thermally protected), Type HL. Compact Fluorescent See page 3-14 for Dimensions and Wiring Diagrams. FOR MORE INFORMATION CALL PAGE 3-13 1-800-BALLAST (225-5278) ELECTRONIC COMPACT FLUORESCENT BALLASTS FOR 2D LAMPS 2D LAMPS WIRING DIAGRAMS AND DIMENSIONS REFERENCE DRAWING FOR C3 C WIRING DIAGRAMS F A Install in accordance with National Electrical Code. G B D E Dwg. A B C D E F G Black C3 2.31” 1.00” 4.25” 4.61” 4.94” 0.98” 1.00” White Green BALLAST Leadless-Poke-in wire connection Red Red Blue Blue DIAGRAM 2a REFERENCE DRAWING FOR C4 Black White Green BALLAST Red Red Yellow Yellow Blue Blue Dwg. A B C D E F DIAGRAM 3a Series lamp operation G C4 2.98” 1.00” 4.25” 4.61” 4.94” 1.55” 1.00” Leadless-Poke-in wire connection Compact Fluorescent Note: Nominal dimensions provided above Contact Universal for drawings and/or tolerances FOR MORE INFORMATION CALL PAGE 3-14 1-800-BALLAST (225-5278) ELECTRONIC COMPACT FLUORESCENT BALLASTS 22, 40 & 55 WATTS QUICK REFERENCE Nominal lamp watts and configuration Lamp Type 22 Watts FC9T5-22W T5 CIRCULAR Lamp Type 40 Watts FC12T5-40W T5 CIRCULAR Lamp Type 22 & 40 Watts FC9T5-22W & FC12T5-40W T5 CIRCULAR Lamp Type 55 Watts FC12T5-55W • Electronic models feature programmed start for excellent lamp performance & auto reset shutdown circuit 22, 40 & 55 WATTS Lead Configuration Mag Qty Line Starting Min Start or of Line Catalog✪ Input Current Current Ballast Temp Power Side Multi Multi Starting Wir Elec Lamps Volt Number Watts Amps Amps Factor (F/C) Factor THD Exit Exit Exit Studs Method✿ Dim Diag Electrical Characteristics - 60 Hz E 1 347 C2642/347ME✱ 26 0.08 —— 0.98 0°/-18º 120 0.21 E 1 C2642UNV◆r 25 —— 1.00 0°/-18º 277 0.10 E 2 347 C242/347ME 47 0.14 —— 1.05 0°/-18º 1.05 0°/-18º 120 0.42 E 2 C242UNV◆ 50 —— 277 0.19 E 1 347 C2642/347ME✱ 40 0.12 —— 0.98 0°/-18º 0.35 120 ❍ E 1 —— 0.98 0°/-18º C2642UNV◆r 42 277 0.16 E 2 347 C242/347ME 71 0.22 —— 0.98 0°/-18º 120 80 0.65 ❍ E 2 C242UNV◆ —— 0.98 0°/-18º 277 79 0.29 120 E 1+1 C242/347ME 59 0.18 —— 277 120 66 0.54 E 1+1 C242UNV◆ —— 277 64 0.24 X X PS C3 2b >.98 <10% –– X X PS C3 2b >.98 <10% –– X X PS C4 1b >.95 <10% –– X X PS C4 1b >.98 <10% –– X X PS C3 2b >.98 <10% –– X PS >.98 <10% –– X X PS C4 1b >.98 <10% –– X X PS C4 1b 0.98 0°/-18º >.98 <10% –– X X PS C4 1b 0.98 0°/-18º >.97 <10% –– X X PS C4 1b 120 0.45 E 1 B2 54PUNV-D 55 —— 1.00 -20/-29 277 0.20 120 0.45 E 1 B254PUNVHB-D 55 —— 1.00 -20/-29 277 0.20 120 51 0.43 E 1 B254PUNVPL-A —— 1.00 -20/-29 277 50 0.20 120 51 0.43 E 1 B254PUNVPLHBA —— 1.00 -20/-29 277 50 0.20 120 107 0.88 E 2 B254PUNV-D —— 1.00 -20/-29 277 104 0.38 120 107 0.88 E 2 B254PUNVHB-D —— 1.00 -20/-29 277 104 0.38 120 92 0.77 E 2 B254PUNVPL-A —— 0.96 -20/-29 277 91 0.34 92 0.77 120 B254PUNVPLHBA —— 0.96 -20/-29 E 2 277 91 0.34 PAGE 3-15 >.98 <10% –– >.99 >.96 >.99 >.96 >.99 >.91 >.99 >.91 >.99 >.98 >.99 >.98 >.99 >.97 >.99 >.97 X C3 2b <10% X — — PS -D 2b <10% X — — PS -D 2b <10% X — — PS -A 1b <10% X — — PS -A 1b <10% X — — PS -D 1b <10% X — — PS -D 1b <10% X — — PS -A 1b <10% X — — PS -A 1b Compact Fluorescent T5 CIRCULAR T5 CIRCULAR LAMPS • Ideal for surface mount fixtures • E lectronic models feature universal input voltage from 120V to 277V. 347V models are also available. LONG TWIN T5 LAMPS 18, 24/27 WATTS QUICK REFERENCE Nominal lamp watts and configuration Lamp Type 18 Watts FT18W/2G11/RS • Ideal for track light & surface mount fixtures • Electronic models feature universal input voltage from 120V to 277V. 347V models are also available • Electronic models feature rapid and programmed start for excellent lamp performance & auto reset shutdown circuit ELECTRONIC COMPACT FLUORESCENT BALLASTS FOR LONG TWIN T5 LAMPS 18 AND 24/27 WATTS (BIAX, DULUX L AND PLL) Lead Configuration Mag Qty Line Starting Min Start or of Line Catalog✪ Input Current Current Ballast Temp Power Side Multi Multi Starting Wir Elec Lamps Volt Number Watts Amps Amps Factor (F/C) Factor THD Exit Exit Exit Studs Method✿ Dim Diag Electrical Characteristics - 60 Hz 120 0.19 —— — X X PS C3 21 E 1 CT218UNVME 23 1.00 0°/-18º >.95 <10% 277 0.07 —— — X X PS C3 21 120 43 0.37 —— — X X PS C3 20 E 2 CT218UNVME 0.98 0°/-18º >.98 <10% 277 42 0.16 —— — X X PS C3 20 Long Twin T5, 4-Pin 120 0.23 >.98 <10% B224PUNV-C 27 —— 1.05 0°/-18º X 277 0.10 >.95 <15% ✱ E 1 347 C2642/347ME 29 0.09 —— 0.90 0°/-18º >.95 <10% — ❍ 0.22 >.99 120 —— 1.01 0°/-18º <10% — E 1 C2642UNVr 26 277 0.10 >.95 120 52 0.43 E 2 B224PUNV-C —— 1.00 0°/-18º >.98 <10% X 277 51 0.18 Long Twin T5, E 2 347 C242/347ME 49 0.14 —— 1.02 0°/-18º >.98 <10% — 4-Pin 120 51 0.43 E 2 C242UNV◆ —— 1.02 0°/-18º >.95 <10% — 277 50 0.19 120 47 0.40 >.98 E 2 C2642UNVr —— 0.98 0°/-18º <10% — 277 49 0.18 >.99 Lamp Type 24/27 Watts FT24W/2G11/RS Compact Fluorescent Lamp Type 24/27 Watts CFM24W/2G10 ❍ E 1 120 0.20 1 B224PUNV-C 24 —— 1.05 0°/-18º 277 0.09 120 48 0.40 ❍ E 2 B224PUNV-C —— 1.00 0°/-18º 277 47 0.17 ❍ E ✿ PS = Programmed Start ❍ Not approved for use in hazardous locations ◆ Add following suffix for complete catalog #: “BE” for Bottom Exit connectors, “ME” for Multi Exit connectors, or “MES” for T5 F-Lamp, Multi Exit with 2” OC screw studs. 4-Pin rAdd “000K” suffix for Mult-E Kit. For Distribution only. ✱ Add “001K” suffix for Mult-E Kit. For Distribution only. — — PS -C 43 X X PS C3 21 X X PS C3 21 — — PS X X PS C4 20 X X PS C4 20 X X PS C3 20 >.98 <10% X — >.95 <15% — PS -C 43 >.98 <10% X — PS — -C 27 -C 29 All ballasts are UL listed, CSA approved and designated Class P (thermally protected). See pages 3-19 and 3-20 for Dimensions and Wiring Diagrams. FOR MORE INFORMATION CALL PAGE 3-16 1-800-BALLAST (225-5278) ELECTRONIC LONG TWIN T5 BALLASTS 36/39 AND 40 WATTS (BIAX, DULUX L AND PLL) LONG TWIN T5 LAMPS • Ideal for track light & surface mount fixtures • New electronic 1 & 2 lamp models for 24 watt lamps • Electronic models feature universal input voltage from 120V to 277V. 347V models are also available. • Electronic models feature programmed rapid start for excellent lamp performance & auto reset shutdown circuit 36/39 & 40 WATTS QUICK REFERENCE Lead Configuration Mag Qty Line Starting Min Start or of Line Catalog✪ Input Current Current Ballast Temp Power Side Multi Multi Starting Wir Elec Lamps Volt Number Watts Amps Amps Factor (F/C) Factor THD Exit Exit Exit Studs Method✿ Dim Diag Lamp Type Electrical Characteristics - 60 Hz 36/39 Watts 120 0.30 —— >.98 B224PUNV-C• 36 0.95 0/-18 <10% X — — PS -C 43 FT36W/2G11/RS ❍ E 1 277 0.13 —— >.95 120 0.37 >.99 ❍ E 1 B254PUNV-D£ 44 —— 1.20 -20/-29 <10% X — — PS -D 43 277 0.17 >.94 120 0.37 >.99 E 1 B254PUNVHB-D 44 —— 1.20 -20/-29 <10% X — — PS -D 43 277 0.17 >.94 Long Twin T5, 120 46 0.38 >.99 4-Pin E 1 B254PUNVPL-A —— 1.00 -20/-29 <10% X — — PS -A A 277 45 0.18 >.90 120 46 0.38 >.99 E 1 B254PUNVPLHBA —— 1.00 -20/-29 <10% X — — PS -A A 277 45 0.18 >.90 120 34 0.29 >.99 < 10% C242UNV◆ —— 0.88 0/-18 X X X PS C4 21 ❍ E 1 277 33 0.14 >.90 < 20% 120 71 0.59 —— >.98 ❍ E 2 B239PUNV-D• 0.97 0/-18 <10% X — — PS -D 29 277 70 0.26 —— >.95 120 89 0.70 >.99 ❍ E 2 B254PUNV-D —— 1.10 -20/-29 <10% X — — PS -D 29 277 83 0.30 >.97 120 89 0.70 >.99 E 2 B254PUNVHB-D —— 1.10 -20/-29 <10% X — — PS -D 29 277 83 0.30 >.97 120 85 0.71 0.98 >.99 E 2 B254PUNVPL-A —— -20/-29 <10% X — — PS -A A 277 83 0.31 0.96 >.96 120 85 0.71 0.98 >.99 E 2 B254PUNVPLHBA —— -20/-29 <10% X — — PS -A A 277 83 0.31 0.96 >.96 E 2 347 C242/347•◆ 64 0.19 —— 0.90 0/-18 >.98 <10% — X X PS C4 20 120 ◆ 0.57 —— >.99 E 2 C242UNV• 64 0.83 0/-18 <10% — X X PS C4 20 277 0.25 —— >.97 Nominal lamp watts and configuration Lamp Type 36/39 Watts CFM36W/2G10 FOR MORE INFORMATION CALL PAGE 3-17 1-800-BALLAST (225-5278) Compact Fluorescent 0.28 >.98 120 B224PUNV-C• 34 —— 0.95 0/-18 <10% X — — PS -C 43 E 1 277 0.12 >.95 120 0.27 —— E 1 C2642UNV◆r 32 0.98 0/-18 >.98 <10% — X X PS C3 21 277 0.12 —— 120 0.28 >.99 E 1 C242UNV◆ 33 —— 0.98 0/-18 <15% — X X PS C4 21 277 0.14 >.90 120 68 0.57 —— T5 F-Lamp, E 2 C242UNV•◆r 0.90 0/-18 >.95 <10% — X X PS C4 20 277 67 0.25 —— 4-Pin Lamp Type ❍ E 1 120 C240SI120RH 43 0.38 —— 1.02 50/10 >.90 <20% X — — IS C6 12✛ 40 Watts >.90 <20% X — — IS C6 12✛ FT40W/2G11 ❍ E 1 277 C240SI277RH 43 0.17 —— 1.02 50/10 120 41 0.34 E 1 C240PUNVHP-B —— 1.00 0/-18 >.95 <10% X — — PS -B 21 277 • 40 0.15 120 0.40 >.99 E 1 C242UNV◆ 47 —— 1.08 0/-18 <10% — X X PS C4 21 277 0.18 >.97 ❍ 120 76 0.63 Long Twin T5, E 2 C240PUNVHP-B• —— 0.90 0/-18 >.98 <10% X — — PS -B 20 4-Pin ❍ 277 73 0.27 ❍ E 2 120 C240SI120RH 70 0.59 —— 0.88 50/10 >.95 <20% X — — IS C6 12 ❍ E 2 277 C240SI277RH 70 0.25 —— 0.88 50/10 >.95 <20% X — — IS C6 12 120 >.99 ◆ 93 0.78 E 2 C242UNV —— 1.00 0/-18 <10% — X X PS C4 20 277 87 0.34 >.98 E 2 120 C340SI120RH 78 0.68 —— 0.99 50/10 >.90 <20% X — — IS C6 14 ✛ E 2 277 C340SI277RH 77 0.28 —— 0.99 50/10 >.90 <20% X — — IS C6 14✛ E 3 120 C340SI120RH 104 0.88 —— 0.88 50/10 >.95 <20% X — — IS C6 14 E 3 277 C340SI277RH 102 0.37 —— 0.88 50/10 >.95 <10% X — — IS C6 14 E 3 347 B332I347HP 97 0.28 —— 0.85 0/-18 >.99 <20% X — — IS ST 6 ELECTRONIC LONG TWIN T5 LAMPS • Ideal for track light & recessed fixtures • Electronic models for 1, 2, 3 & 4 lamp applications • Programmed Rapid & Instant Starting Options • Models feature auto reset shutdown circuit 50, 55 & 80 WATTS ELECTRONIC LONG TWIN T5 BALLASTS 50, 55 AND 80 WATTS (BIAX, DULUX L AND PLL) m QUICK REFERENCE Nominal lamp watts and configuration Lamp Type 50 Watts FT50W/2G11 Compact Fluorescent Long Twin T5, 4-Pin Lamp Type 55 Watts FT55W/2G11 Long Twin T5, 4-Pin Lead Configuration Mag Qty Line Starting Min Start or of Line Catalog✪ Input Current Current Ballast Temp Power Side Multi Multi Starting Wir Elec Lamps Volt Number Watts Amps Amps Factor (F/C) Factor THD Exit Exit Exit Studs Method✿ Dim Diag Electrical Characteristics - 60 Hz E 1 347 B254P347-D 58 0.17 —— 1.12 -20/-29 >.95 <10% X — — PS -D 43 347 0.19 >.95 <10% E 1 B254PHRVHB-E 65 —— 1.12 -20/-29 X — — PS -E 42 480 0.15 >.90 <15% 0.47 >.99 120 —— 1.00 -20/-29 <10% X — — PS -D 43 E 1 B254PUNV-D 57 277 0.21 >.96 120 0.47 >.99 E 1 B254PUNVHB-D 57 0.21 —— 1.00 -20/-29 >.96 <10% X — — PS -D 43 277 120 59 0.50 >.99 E 1 B254PUNVPL-A1 —— 1.00 -20/-29 <10% X — — PS -A A 277 58 0.22 >.93 120 59 0.50 >.99 E 1 B254PUNVPLHBA1 —— 1.00 -20/-29 <10% X — — PS -A A 277 58 0.22 >.93 E 2 347 B254P347-D 106 0.31 —— 1.10 -20/-29 >.98 <10% X — — PS -D 27 347 115 0.33 >.98 E 2 B254PHRVHB-E —— 1.10 -20/-29 <10% X — — PS -E 41 480 114 0.25 >.95 120 111 0.93 >.99 E 2 B254PUNV-D —— 1.00 -20/-29 <10% X — — PS -D 29 277 108 0.40 >.98 111 0.93 >.99 120 B254PUNVHB-D —— 1.00 -20/-29 <10% X — — PS -D 29 E 2 277 108 0.40 >.98 112 0.95 >.99 120 B254PUNVPL-A1 —— 0.93 -20/-29 <10% X — — PS -A A E 2 277 108 0.42 >.97 1 12 0.95 >.99 120 B254PUNVPLHBA1 —— 0.93 -20/-29 <10% X — — PS -A A E 2 277 108 0.42 >.97 120 179 1.49 >.98 E 3 B454PUNV-E —— 1.13 -20/-29 <10% X — — PS -E 44 277 177 0.64 >.95 120 179 1.49 >.98 E 3 B454PUNVHB-E —— 1.13 -20/-29 <10% X — — PS -E 44 277 177 0.64 >.95 159 1.34 >.99 120 B454PUNVPL-E1 —— 0.91 -20/-29 <10% X — — PS -E B E 3 277 157 0.58 >.97 120 1 59 1.34 >.99 E 3 B454PUNVPLHBE1 —— 0.91 -20/-29 <10% X — — PS -E B 277 157 0.58 >.97 120 240 1.98 E 4 B454PUNV-E —— 1.10 -20/-29 >.98 <10% X — — PS -E 44 277 235 0.84 120 240 1.98 E 4 B454PUNVHB-E —— 1.10 -20/-29 >.98 <10% X — — PS -E 44 277 235 0.84 209 1.76 >.99 120 B454PUNVPL-E1 —— 0.91 -20/-29 <10% X — — PS -E B E 4 277 203 0.75 >.98 120 209 1.76 >.99 E 4 B454PUNVPLHBE1 —— 0.91 -20/-29 <10% X — — PS -E B 277 203 0.75 >.98 E 1 347 B254P347-D 57 0.17 —— 0.92 -20/-29 >.95 <10% X — — PS -D 43 347 0.19 >.98 <10% E 1 B254PHRVHB-E 61 0.14 —— 0.92 -20/-29 >.90 <15% X — — PS -E 42 480 0.47 >.99 120 —— 1.00 -20/-29 >.96 <10% X — — PS -D 43 E 1 B254PUNV-D 56 0.21 277 120 0.47 >.99 E 1 B254PUNVHB-D 56 0.21 —— 1.00 -20/-29 >.96 <10% X — — PS -D 43 277 120 0.49 >.99 E 1 B254PUNVPL-A1 58 —— 1.00 -20/-29 <10% X — — PS -A A 277 0.22 >.93 120 0.49 >.99 E 1 B254PUNVPLHBA1 58 —— 1.00 -20/-29 <10% X — — PS -A A 277 0.22 >.93 E 1 347 C242/347ME 43 0.13 —— 0.83 0/-18 >.99 <10% — X X PS C4 21 0.38 >.99 120 —— 0.83 0/-18 >.95 <10% — X X PS C4 21 E 1 C242UNVu 46 0.17 277 1 Consult factory for availability FOR MORE INFORMATION CALL PAGE 3-18 1-800-BALLAST (225-5278) MAGNETIC AND ELECTRONIC COMPACT FLUORESCENT BALLASTS LONG TWIN T5 LAMPS DIMENSIONS QUICK REFERENCE Nominal lamp watts and configuration Lamp Type 55 Watts FT55W/2G11 Long Twin T5, 4-Pin Lead Configuration Mag Qty Line Starting Min Start or of Line Catalog✪ Input Current Current Ballast Temp Power Side Multi Multi Starting Wir Elec Lamps Volt Number Watts Amps Amps Factor (F/C) Factor THD Exit Exit Exit Studs Method✿ Dim Diag Electrical Characteristics - 60 Hz E 2 347 B254P347-D 102 0.30 —— 0.90 -20/-29 >.98 <10% X — — PS -D 27 347 109 0.33 >.98 E 2 B254PHRVHB-E —— 0.90 -20/-29 <10% X — — PS -E 41 480 108 0.24 >.95 120 112 0.93 >.99 E 2 B254PUNV-D 109 0.39 —— 1.00 -20/-29 >.98 <10% X — — PS -D 29 277 112 0.93 >.99 120 B254PUNVHB-D 109 0.39 —— 1.00 -20/-29 >.98 <10% X — — PS -D 29 E 2 277 120 107 0.89 >.99 E 2 B254PUNVPL-A1 —— 0.93 -20/-29 <10% X — — PS -A A 277 104 0.38 >.97 120 107 0.89 >.99 E 2 B254PUNVPLHBA1 —— 0.93 -20/-29 <10% X — — PS -A A 277 104 0.38 >.97 120 174 1.45 >.98 E 3 B454PUNV-E 171 0.62 —— 0.93 -20/-29 >.95 <10% X — — PS -E 44 277 120 174 1.45 >.98 E 3 B454PUNVHB-E 171 0.62 —— 0.93 -20/-29 >.95 <10% X — — PS -E 44 277 120 148 1.25 >.99 E 3 B454PUNVPL-E1 —— 0.93 -20/-29 <10% X — — PS -E B 277 146 0.54 >.97 148 1.25 >.99 120 B454PUNVPLHBE1 —— 0.93 -20/-29 <10% X — — PS -E B E 3 277 146 0.54 >.97 120 229 1.91 E 4 B454PUNV-E 223 0.80 —— 0.90 -20/-29 >.98 <10% X — — PS -E 44 277 120 229 1.91 E 4 B454PUNVHB-E 223 0.80 —— 0.90 -20/-29 >.98 <10% X — — PS -E 44 277 120 191 1.61 >.99 E 4 B454PUNVPL-E1 —— 0.93 -20/-29 <10% X — — PS -E B 277 187 0.69 >.98 120 1 91 1.61 >.99 E 4 B454PUNVPLHBE1 —— 0.93 -20/-29 <10% X — — PS -E B 277 187 0.69 >.98 1 Consult factory for availability REFERENCE DRAWING FOR -B L W H M X Compact Fluorescent Dwg. -B 9.50” 1.50” 1.00” 8.89” 0.88” REFERENCE DRAWING FOR C3 C REFERENCE DRAWING FOR C4 F A G B D E Dwg. A B C D E F G C3 2.31” 1.00” 4.25” 4.61” 4.94” 0.98” 1.00” Dwg. A B C D E F Leadless-Poke-in wire connection G C4 2.98” 1.00” 4.25” 4.61” 4.94” 1.56” 1.00” REFERENCE DRAWING FOR C6 Leadless-Poke-in wire connection REFERENCE DRAWING FOR -D, -E, ESK Dwg. L W C A B H M F 111/16" 5/16" X -D 16.88” 1.18” 1.00” 16.20” -- -E 16.88” 1.74” 1.18” 16.28” ---A 9.5” 1.70” 1.18” 8.89” 1.69” ESK 16.65” 1.24” 1.00” 16.30” --Note: Nominal dimensions provided above Contact Universal for drawings and/or tolerances E D PAGE 3-19 Dwg. A B C D E F C6 2.40” 1.55” 8.31” 8.89” 9.50” 1.19” Lead Lengths: Side • Black/White–11˝ • Red/Blue–16˝ • Yellow–16˝ MAGNETIC AND ELECTRONIC COMPACT FLUORESCENT BALLASTS LONG TWIN T5 LAMPS WIRING DIAGRAMS Line Black White BALLAST Blue Blue Red Black White Green Red BALLAST Yellow Blue DIAGRAM 12 Parallel lamp operation ; DIAGRAM 23 Series lamp operation Cap unused blue lead; insulate to 600 volts. Line Black White BALLAST DIAGRAM 42 For one lamp application, individually cap yellow and yellow/black leads, insulate to 600V Blue Blue Blue Red DIAGRAM 27 Series lamp operation DIAGRAM 43 DIAGRAM 14 Parallel lamp operation ; Cap unused blue lead; insulate to 600 volts. Black White Green BALLAST Red Blue Black Red White Green DIAGRAM 28 Red Yellow BALLAST Yellow Blue Compact Fluorescent Blue DIAGRAM 20 Series lamp operation Black Red White Red Green BALLAST DIAGRAM 44 DIAGRAM 29 For one lamp operation, cap blue leads individually, insulate to 600V. Blue Blue Line DIAGRAM A DIAGRAM 41 Mount lamp within 1" of grounded metal reflector. DIAGRAM 21 For three lamp operation, cap Blue/White leads individually, insulate to 600V. DIAGRAM B DIAGRAM 50 FOR MORE INFORMATION CALL PAGE 3-20 1-800-BALLAST (225-5278) Notes Compact Fluorescent FOR MORE INFORMATION CALL PAGE 3-21 1-800-BALLAST (225-5278) Ballasts For High Intensity Discharge Lamps Universal Means Higher Expectations In High Intensity Discharge Universal Lighting Technologies (“Universal”) offers a wide array of ballasts for High Intensity Discharge (HID) lamps. Applications include Metal Halide (MH), Pulse Start Metal Halide (PSMH), and High Pressure Sodium (HPS) lamps ranging from 35 to 1500 watts. We’re the technology leader in every category of HID ballasts. Our Universal Precise™ line is the latest innovation in magnetic core & coil technology in years. HID Universal offers a complete line of HID ballasts for applications ranging from 35 - 1500 watts. Universal Lighting Technologies is a member of the Panasonic Group Product Overview Core & Coil Core & coil ballasts are used in over 90% of all HID fixtures. Universal’s core & coil models are available for all HID lamp types, including single-, dual-, tri-, quad- and multi-volt designs. For added versatility and reduced inventory costs, Universal has also introduced the industry’s first Multi-5™ ballast (120, 208, 240, 277, or 480 volt), featuring a 480-volt tap on a conventional quad-tap ballast. Our core & coil models are ideal for a wide variety of lighting applications, including factories, warehouses, gymnasiums and retail stores. All these ballasts feature precision-wound coils, ensuring even heat dissipation and the highest electrical integrity. Universal’s Universal Precise™ is the next generation in core & coil technology, featuring a smaller, lightweight design and improved temperature performance. Universal Precise™ fits virtually all applications, and has no exposed live metal parts. There are no plastic extrusions, which prevents breakage during shipping. Color-coded leads make installation easy. 50 Hertz Universal offers 50 Hz core & coil ballasts to meet the rapid growth in demand in international markets. Our ballasts are available for 220, 230, and 240 volt electrical systems. HID F-Can These ballasts are used primarily for indoor downlighting applications where quiet operation is essential. All the components of these ballasts are enclosed in a fluorescent-style ballast can and are thermally protected. F-Can Ballasts Core and Coil Ballasts PAGE 4-2 HID Ballast Kits FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Product Overview For maximum safety and reliability, all Universal capacitors come with built-in bleed resistors (patented by Universal) and approved by CSA (CSA file #LR51331, metal cases only). Environmental safety is assured by use of biodegradable, nontoxic (no PCBs) dielectric fluid (soybean oil), patented by Universal for use in capacitors. Dry-film capacitors do not include protective devices. Since they can fail in a hazardous manner, it is the responsibility of the purchaser to take appropriate precautions. Capacitors Universal has a comprehensive line of capacitors in metal cases (up to 525V ratings) and plastic cases (up to 400V ratings). All Universal capacitors are designed for 60,000 hours of continuous life. They’re exceptionally reliable because we put them through accelerated life testing at 125% rated voltage and rated temperature +10°C. Universal capacitors are normally packaged with ballasts. They may also be ordered separately, bulk packaged, or individually boxed with the suffix “BH” (metal cases only). Capacitor weights vary from 1/4 lb. to 1 lb. each. Dry Capacitors Type “P” plastic case capacitors described in this section are dry and do NOT contain safety interrupters (or oil). Plastic cases are UL rated “94V-O” (for use up to 100°C maximum). Type “P” capacitors are supplied with stranded copper wire leads 8 inches long (18 awg, with 150°C rated insulation). Capacitor rolls are sealed inside plastic cases using epoxy. Design and testing of Universal capacitors follow specifications in Electronic Industries Association (EIA) Standard 456-A, titled “Metalized Film Dielectric Capacitors for Alternating Current Application.” “P” capacitors are designed and rated for continuous duty AC voltages below 400VAC @ 50 or 60 Hz. Capacitors used with HID ballasts at voltages above 400VAC should contain interrupters (available from Universal in oval “MF” and round “RMF” oil-filled metal cases). Plastic Dry Type Capacitors Metal and Oil Filled Capacitors HID Protective Device (Only in metal cases) Protective device to prevent case rupture Normal Cover Position Normal Cover Position 1/2" 1/2" Barrier Normal Position of Protective Device Barrier Barrier Position of Protective Device After Activation Capacitor Protective CapacitorDevices Protective Devices PAGE 4-3 Barrier FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Oil-Filled Capacitors VACr 5.0 300 6.0 Part # Case Ht (“) µF VACr Part # Case Ht (“) 005-1466-BH 1.25 oval 2.2 22.5 300 005-1419-BH 1.50 oval 3.5 300 005-1561-BH 1.25 oval 2.2 24.0 360 005-3160-BH 1.75 oval 3.1 7.0 300 005-1410-BH 1.25 oval 2.2 24.0 400 005-2664-BH 1.75 oval 3.1 8.0 330 005-1411-BH 1.25 oval 2.2 24.0 480 005-2779-BH 1.75 oval 3.9 10.0 330 005-1413-BH 1.25 oval 2.7 24.5 300 005-3278-BH 1.75 oval 2.7 10.0 400 005-1184-BH 1.50 oval 2.7 26.0 330 005-2669-BH 1.75 oval 3.1 10.0 400 005-2167-BH 1.75 dia 2.9 26.0 525 005-2776-BH 1.75 oval 4.3 12.0 300 005-1467-BH 1.25 oval 3.1 28.0 240 005-1886-BH 1.75 dia 2.3 12.0 400 005-2799-BH 1.50 oval 2.7 28.0 300 005-1468-BH 1.75 oval 3.1 12.0 440 005-1464-BH 1.50 oval 3.1 28.0 425 005-1799-BH 1.75 oval 3.9 13.0 300 005-1414-BH 1.25 oval 3.1 30.0 440 005-1475-BH 1.75 oval 3.9 14.0 240 005-1884-BH 1.75 dia 2.3 32.0 300 005-2351-BH 1.75 oval 3.1 14.0 300 005-1415-BH 1.50 oval 2.7 32.0 525 005-1474-BH 2.00 oval 3.9 15.0 400 005-1185-BH 1.75 oval 2.7 33.0 300 005-1470-BH 1.75 oval 3.1 16.0 300 005-1498-BH 1.50 oval 2.7 35.0 330 005-1421-BH 1.75 oval 3.1 17.5 300 005-1417-BH 1.50 oval 3.1 36.0 525 005-2793-BH 2.00 oval 4.3 18.0 440 005-1401-BH 1.75 oval 3.1 40.0 240 005-1887-BH 1.75 dia 2.7 18.5 330 005-1796-BH 1.50 oval 3.1 40.0 300 005-1768-BH 1.75 oval 3.9 20.0 240 005-1885-BH 1.75 dia 2.3 48.0 330 005-1422-BH 1.75 oval 3.9 20.0 330 005-1418-BH 1.50 oval 3.1 52.0 240 005-1888-BH 2.00 dia 2.9 20.5 400 005-3262-BH 1.75 oval 3.1 55.0 240 005-1594-BH 1.75 oval 3.5 21.0 525 005-1495-BH 1.75 oval 3.9 55.0 300 005-2117-BH 1.75 oval 3.9 HID µF PAGE 4-4 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Dry Capacitors -- 100°C Rated µF V Part # DIA (“) L (“) -- 100°C Rated µF V Part # DIA (“) L (“) 5.0 280 R17058511-BH 1.26 5.0 280 R17058512-BH 1.26 5.0 330 R17058539-BH 1.26 6.0 280 R17058513-BH 1.26 6.0 280 R17058514-BH 1.26 7.0 280 R17058515-BH 1.65 8.0 300 R17058535-BH 1.65 8.0 330 R17058541-BH 1.65 10.0 280 R17058517-BH 1.26 10.0 280 R17058519-BH 1.65 10.0 330 R17058578-BH 1.65 10.0 400 R17058555-BH 1.65 10.0 400 R17058557-BH 1.65 11.0 400 R17058558-BH 1.65 12.0 300 R17058536-BH 1.65 12.0 330 R17058543-BH 1.65 12.0 400 R17058580-BH 1.65 13.0 330 14.0 170 R17058500-BH 1.26 14.0 280 R17058520-BH 1.65 14.0 280 R17058520-BH 1.65 14.0 400 R17058560-BH 1.65 15.0 400 R17058562-BH 1.65 15.0 400 R17058563-BH 1.85 16.0 280 R17058522-BH 1.65 16.0 280 R17058522-BH 1.65 16.0 330 R17058547-BH 1.65 17.0 400 R17058588-BH 1.65 17.5 280 R17058523-BH 1.65 20.0 20.0 20.0 20.0 20.5 21.0 22.0 22.5 22.5 24.0 24.0 24.0 24.5 26.0 26.5 28.0 28.0 28.0 35.0 35.0 40.0 40.0 48.0 48.0 52.0 52.0 55.0 55.0 55.0 2.36 2.83 2.24 2.36 2.83 2.83 2.83 2.83 2.83 2.83 2.83 2.83 3.82 2.83 2.83 2.83 3.82 2.83 2.83 2.83 3.82 3.82 3.82 2.83 2.83 2.83 3.82 3.82 170 R17058501-BH 1.65 280 R17058526-BH 1.65 330 400 R17058564-BH 1.85 400 R17058565-BH 1.85 400 R17058567-BH 1.85 400 R17058569-BH 1.85 280 R17058527-BH 1.65 280 R17058528-BH 1.65 280 R17058529-BH 1.65 400 R17058571-BH 1.85 400 330 R17058552-BH 1.65 300 R17058537-BH 1.65 400 R17058574-BH 1.85 170 R17058502-BH 1.65 280 R17058530-BH 1.65 330 R17058553-BH 1.85 280 R17058531-BH 1.65 280 R17058532-BH 1.85 240 R17058505-BH 1.65 240 R17058506-BH 1.65 280 R17058533-BH 1.85 330 R17058554-BH 2.05 170 R17058503-BH 1.85 280 R17058534-BH 1.85 240 R17058507-BH 1.85 240 R17058509-BH 1.85 300 R17058538-BH 1.85 2.83 3.82 3.82 3.82 3.82 3.82 3.15 3.82 3.82 3.82 4.76 4.76 4.76 2.83 4.76 3.82 3.82 4.76 3.82 4.76 4.76 4.76 3.82 4.76 3.82 4.76 4.76 HID PAGE 4-5 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) on center 5.75" 1 Slot laces 7.75" 2.75" Bracket Reference Chart 1.75" on center 2.65" Bracket B4 0.50" TYP. CORE & COIL WELDED BRACKETS CORE & COIL ADJUSTABLE MOUNTING Bracket B4B R A C K E T S 6.10" on center 0.55" 6.75" 0.50" 5.75" on center .640" 7.75" 7.75" BracketAll welded B3brackets are .093” thick. 0.75"0.25" Ref. Drawing ADJ1 .250 Slot 2 Places 1.25" 1.00" 0.75"0.25" 0.75"0.25" 3.35" 0.75"0.25" 1.25" 1.00" 0.30" 3.35" 4.00" 0.30" 3.35" 5.25" 0.30" Bracket B2 Bracket B1-A .281 Slot 6 Req. .281 Slot 2 Places 0.75"0.25" .250 Slot 2 Places 1.25" 2.65" 6.75" 3.35" Bracket B1 on center 4.00" 7.75" 0.55" 4.60" .640"0.50" 7.75" Ref. Drawing B4 BracketB1-A B4 Bracket Bracket B3 2.75" 0.30" 0.70" 2.65" 6.10" 4.60" on center 5.25" 0.25" Dia. 3 Holes 6.10" Bracket B2 B4 Bracket 0.50" TYP. 7.75" Bracket B3 0.25" Dia. 20.55" Holes 6.75" 1.50" Bracket B1-B Bracket B4 OR .640" For use with: 0.25" Dia. 3 Holes • 50 to 175 watt Mercury, High Pressure Sodium and Metal Halide and some 250 watt Metal Halide Bracket B4 .640" 7.75" 1.50" 0.90" 6.10" 0.55" 0.93" 0.70" 0.70" .29" 7.75" 7.75" 4.60" 6.75" on center 5.25" 2.65" 0.58" on center 0.50" 45º 0.70" 6.10" on center 3 Holes 0.29" on center 0.70" 0.25" Dia. 1.30" 1.75" 0.93" R. TYP. 0.50" 0.09" .640" 0.50" R. TYP. 0.55" 0.43" 7.75" .281 Slot 6 Req. on center 1.50" Bracket B2 B4 Bracket 5.50" 6.75" on center 1.81" 2.65" on center 7.75" on center 1.75" .281 Slot 6 Req. 0.70" 5.25" 6.75" 0.50" R. TYP. Ref. Drawing MB1 1.25" 1.00" 1.75" 2.75"0.25" R. TYP. .281 Slot 6 Req. on center TYP. .281 Slot 6 Req. 1.75" on center TYP. Bracket B1-A Bracket B3 4.00" 7.75" 7.75" Ref. Drawing B1-B 1.50" 7.75" TYP. 0.30" 1.25" 1.00" 2.75" 0.50" 3.35" 0.50" 6.10" Bracket B2 2 Places 0.70" on center on center .281 Slot 2 Places Ref. Drawing ADJ2 .250 Slot OR 1.25" 1.00" 0.70" 2.75" 1.75" 0.30" R. TYP. 4.00" 0.50" Bracket B1-A 5.25" Ref. Drawing B3 0.75"0.25" 0.50" TYP. 1.25" 4.60" 0.30" 4.00" Bracket B1-A Bracket B1 .281 Slot 2.75" 1.75" 2 Places on center 0.75"0.25" 3.35" 3.35" Bracket B1 4.00" Ref. Drawing B1-A 0.30" OR 4.00" 4.60" 0.30" 4.00"3.35" HID 0.25 3H Routinely supplied with replacement kits. Ref. Drawing B2 0.75"0.25" .250 Slot 2 Places 0.30" 0.70" 0.70" R. TYP. Bracket B3 Ref. Drawing B1 7.75" .281 Slot 6 Req. OR 0.25" Dia. 3 Holes Ref. Drawing MB2 OR 7.25" .090" 1.880" .460" 2.685" 1.300" 1.750" 45ϒ .835" .290" .930" .580" .290" OR .735" 1/4" Dia. 2 Holes For use with: • 250 to 1500 watt Metal Halide • 250 to 1000 watt High Pressure Sodium and Mercury Vapor OR PAGE 4-6 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Application And Operating Information Underwriters’ Laboratories, Inc. Acceptance All F-Can and Weatherproof ballasts listed in this catalog are Underwriters’ Laboratories, Inc. white card listed, except those for 347 volt operation. All Core & Coil and Potted Core & Coil ballasts listed in this catalog are Underwriters’ Laboratories, Inc. yellow card listed (component recognized). Ballast Replacement Ballast replacement presents the possibility of exposure to potentially hazardous voltages and should be performed only by qualified personnel. All installation, inspection and maintenance should be performed only with the entire circuit power to fixture or equipment turned off. Installation shall be in accordance with National Electric Code. Heat A ballast, like any other electrical device, generates heat during normal operation. Planning for maximum heat dissipation with proper fixture design, installation planning and ballast selection will minimize the possibility of a heat-related problem arising. Excessive temperature will have an adverse effect on ballast life. Normal temperature limits: F-Can Ballasts Maximum case temperature: 90°C Potted Core & Coil Ballasts and Core & Coil Ballasts Insulation: Class 180°C Maximum coil temperature: 165°C (measured by change of resistance method) temperature. The ballast will continue to cycle until the cause of overheating is eliminated. If the ballast is defective, it must be replaced. If the cause is external, the ballast will resume normal operation after abnormal conditions are eliminated. To attain normal ballast life, the maximum coil temperature of the ballast should not exceed the rating of the insulation system. A temperature increase of 10° C results in a 50% reduction of ballast life. Low Ambient Temperature (cold) As temperatures drop, less and less vaporized gas is available within the arc tube of a high intensity discharge lamp, thereby causing an increase in the open circuit voltage required to initiate an arc in the lamp, until a point is reached where the lamp cannot be started. The minimum temperature at which any ballast listed in this catalog will provide reliable starting is listed with the electrical characteristics. Ballasts should be protected from weather, moisture, or other abnormal atmospheric conditions, unless specifically designed for use under adverse conditions. Fusing The purpose of fusing an HID ballast is to remove the ballast from the power line in the event of a ballast system failure. A fuse does not protect the ballast from failing. Because the temperature in the ballast compartment is high, typically 90OC, fuse ratings are specified at 25OC, and that this rating declines as the temperature increases, HID fuse recommendations are made between 2 and 3 times the maximum current the ballast will draw during all normal conditions. All F-Can ballasts listed in this catalog are equipped with built-in automatic resetting internal thermal protection as a standard feature. Fast-blow fuses should not be used due to the possibility of high inrush currents. These currents are due to the fact that the power can be applied ant any point in the AC voltage waveform. Standard and slow-blow are acceptable. Whenever a ballast with thermal protection is used, it is imperative that the fixture/ballast/lamp combination be heat tested under actual or simulated installation conditions to assure that the ballast will not cycle. The resetting thermal protector functions as a thermostat which will open and temporarily deactivate the ballast when it exceeds the permissible When using the 120V tap for auxiliary lighting, a slow-blow fuse should be used to protect the ballast from damage from a fault in the auxiliary lighting circuit. HID REMOTE MOUNTING DISTANCE Maximum Length in Feet for Remote Mounting of HID Ballasts to Lamp ANSI Lamp Type Watts 12 GA 14 GA 16 GA 18 GA M57 Metal Halide 175 272 171 107 67 M58 Metal Halide 250 194 122 77 48 M59 Metal Halide 400 132 83 52 33 M47 Metal Halide 1000 196 123 77 48 M48 Metal Halide 1500 146 92 58 36 For proper installation, insure that remote ballasts are properly vented and mounted to a heat-dissipating surface. PAGE 4-7 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Application And Operating Information Sound High intensity discharge lamp ballasts, like all electromagnetic devices, produce noise, or “hum.” It is the degree of noise which determines the existence of a problem. Ballast noise will only be noticeable when it exceeds the ambient sound level of the installation. It is obvious that a ballast designed primarily for outdoor or factory use would not be suitable in an office environment. The vast improvements in all high intensity discharge lamps and ballasts, and their excellent energy efficiency, have made them viable options for many indoor applications. The ballasts being considered should be carefully analyzed to insure that there will not be an objectionable level of ballast noise. All F-Can ballasts listed in this catalog are “Sound Rated” to aid in the selection of a ballast which is proper for the environment in which it will operate. Potted Core & Coil ballasts are also designed to operate at reduced sound levels, generally several decibels lower than a standard Core & Coil ballast. Core & Coil ballasts are not sound rated. HID In situations where light output necessitates using a ballast with a sound rating or noise level not normally acceptable, the ballast should be remotely mounted. Note, however, that not all ballasts listed in this catalog are designed or recommended for remote mounting. Polarity Polarity refers to the proper connection of ballast lead wires to line wires. To aid you in making a correct installation, Universal ballast leads are color-coded for easy identification. The white or yellow ballast lead is to be connected to the neutral or common. Choose the appropriate ballast voltage lead to connect to the line. Grounding Ballasts and capacitors or starters in metallic casings must always be grounded. Ballasts and components may be grounded to the fixture or otherwise connected to ground. It would be hazardous to make contact with an ungrounded fixture, ballast or other electrical component while in operation. Operating Line Voltage Limits To receive the full benefits of rated lamp output and to prolong ballast life, it is essential that the voltage supplied to an installation be maintained within the prescribed limits. In general, the line voltage supplied to a lag type ballast (reactor or high reactance autotransformer) should be maintained within 5% of the voltage for which the ballast is rated. The line voltage to lead type ballasts (constant wattage autotransformer or constant wattage isolated) should be maintained within 10%. Subjecting a ballast to excessive voltage for an extended period of time results in the deterioration of the coil insulation. This insulation breakdown will cause early ballast failure. Low voltage has no damaging effect on the ballast. It could, however, have an adverse effect on lamp performance and starting dependability. Maintenance Selecting and installing an adequate and efficient lighting system means nothing if it is not properly maintained. Maintenance must always be considered as part of the life cycle cost of any high intensity discharge lighting installation in order to assure the continued performance of the system as originally specified. First and foremost in importance is proper lamp maintenance. High intensity discharge lamps do not “burn out” like an incandescent bulb, but rather, undergo changes within the arc tube which prevent the lamp from starting properly, warming up and producing full light output. The beginning of difficulties such as these generally indicates the end of a lamp’s useful life. Also, a dead lamp left in a fixture can be very damaging to the ignitor in systems which utilize them. To overcome this problem, Universal offers automatic shutoff ignitors, which are described in the ignitor section of this catalog. PAGE 4-8 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Application And Operating Information In difficult locations, group replacement of all the lamps, working or not, is often more economical and convenient than spot replacement. The same, of course, applies to ballasts which might be approaching the end of their life. Only you can decide what is right for your lighting system, but what is important is that you have a maintenance program. Periodic cleaning of the fixtures’ lenses and reflectors is also important in maintaining proper light output. For indoor systems, maintenance of reflective surfaces, such as walls and ceilings, will also help assure proper levels of illumination. STANDBY LIGHTING AND PACKAGING Standby Lighting To provide light during a high intensity discharge lamp’s warmup period, or the cool-down period following a power interruption which has extinguished it, incandescent standby lighting can be incorporated. This is accomplished by use of a standby lighting device, or remote, that switches off an incandescent lamp incorporated into the fixture once an arc has been established, or reestablished, in the HID lamp. Generally, standby lighting devices operate on 120 volts, so a tap must be provided on ballasts designed to operate at higher line voltages. The 120 volt terminal or lead on all Universal dual-, tri-, quad- and multi-volt ballasts can be used as a tap for standby lighting when the ballast is utilized for any of the higher voltages. Many single voltage ballasts are available with a 120 volt tap and are listed throughout the Core & Coil data section. Other single voltage ballasts may be available in this version. Consult our Customer Service Department for availability and price information. Packaging Standard Pack Universal’s high intensity discharge lamp ballasts are routinely packed in easy-to-handle cartons containing from 1 to 20 units per carton, depending on the size and weight of the ballasts. Consult Customer Service for the number of “units per carton” for shipment with attached mounting brackets, capacitors (for high power factor units), and ignitors (if required). Other ordering criteria may cause packaging to vary. Tray Pack For the convenience of large quantity users who request it, Universal ballasts may be packed in trays. The number of units depends upon the size and weight of each ballast. These trays are large corrugated cartons with lids and sides that come off easily. This type of packaging affords Universal customers a savings of time and money on their own production costs. There are fewer cartons to open, break up and dispose of on the assembly line; warehouse handling is reduced and inventory control is easier. There is no additional charge for tray packing. Individual Cartons All Distributor Replacement Kits, Weatherproof, Potted Core & Coil and other larger ballasts are packaged in individual cartons. Individual cartons serve a threefold purpose: as a display carton, a stock package, and a shipping container for the retail market. Individual cartons may be packed in master cartons, depending on weight and size. Individual carton packaging may be available for other ballasts. Contact our Customer Service Department for availability and cost. PAGE 4-9 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID Any connection to the 120 volt tap must be accomplished by means of a slow-blow fuse. This fuse will protect the ballast from abnormal conditions in the standby lamp circuit or its control device. The fuse should be located in the coolest place in the fixture (below 80°C). The recommended fuse amperage and maximum auxiliary lamp wattage are listed in this catalog for each ballast suitable for standby lighting applications. Be sure to follow the wiring instructions of the standby lighting device manufacturer. All applicable requirements of the National Electrical Code must be met. Nomenclature UNIVERSAL PRECISE™ ABBREVIATIONS UL Bench Top Rise Temperature Code CWA Constant Wattage Autotransformer CWI Constant Wattage Isolated ISO Regulated Lag R-HPF Reactor—High Power Factor R-NPF Reactor—Normal Power Factor To facilitate UL inspection, the UL Bench Top Rise Temperature Code is shown on the Universal Core & Coil Ballast label as 1029X. 1029 is the UL Standard for HID Ballasts, and the X is the temperature code. If a fixture is UL listed for 1029D, then automatically all ballasts with an A, B, C or D temperature classification are acceptable for use within that same fixture. HX-HPF Lag Type — High Reactance Autotransformer—High Power Factor UL Bench Top Rise Letter Code Temperature Range for Class H (180° C) Ballasts HX-NPF Lag Type — High Reactance Autotransformer—Normal Power Factor B 75°C < 80°C C 80°C < 85°C A<75°C D 85°C < 90°C E 90°C < 95°C F 95°C < 100°C Field 1 2 3 4 5 6 7 8 9 1 1 C 5 1 M 3 0 1 C Number of Digits HID 0 0 Container Type (C/T/I/K) Wattage Field 1 A Pack Code (000 TO 999) Lamp Type (M/P/S/H) 3 M L T Socket Type & Other Oddities (M/D/X/L) Frame Size (E/3/4/5/X) Style (C/F/W/E/I/P) Circuit Type (R/A/I/O/L/M) 2 to 4 2 0 0 0 Primary Voltage (MLT/ML5/TRI/ 48T/120/277/ 230) 1 M Description 1 (M) Metal Halide, (P) Pulse Start Metal Halide, (S) High Pressure Sodium 2 35 to 1500 Watts (Varies from two to four digits) 3 (MLT) Quad, (ML5) Multi-5, (TRI) TriVolt, (48T) 480/120, (120) 120, (277) 277, (230) 230V/50Hz 4 (R) Reactor, (A) CWA, (I) CWI, (O) IsoReg, (L) High Reactance/Lag, (M) MagLag 5 (C), C&C, (F) F-Can, (W) Weatherproof, (E) Encased/Potted C&C (I) Indoor Encased 6 (E) E&I, (3) 3x4, (4) 4-3/4, (5) 5-3/4, (X) Non Core and Coil 7 (M) Mogul or Medium, (D) Double Ended, (L) Low Loss 8 Pack Code (000 to 999, per pack code listing) 9 (C) Carton, (T) Tray, (I) Individual, (K) Kit PAGE 4-10 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Specifications TYPICAL SPECIFICATIONS FOR HID BALLASTS 1. Ballasts shall be designed in accordance with all applicable ANSI specifications including ANSI C82.4. 2 . The Core & Coil ballast shall be designed with class “H” (180°C) or higher insulation system and vacuum impregnated with a 100% solid based resin. 3 . All coils shall be precision wound. 4 . Core & Coil ballasts shall be designed to operate at least 180 cycles of 12 hours on and 12 hours off, with the lamp circuit in an open or short-circuited condition and without undue reduction in ballast life. 5. Core & Coil ballast and starter combinations shall be designed to provide a reliable lamp starting down to -40°C for High Pressure Sodium and Pulse Start Metal Halide and -30°C for Metal Halide and Mercury at minimum rated line voltage. 6. Manufacturer shall provide written warranty against defects in workmanship, including replacement, for two years from date of manufacture. CAPACITORS 1. All capacitors will be provided with a self-contained internal bleeder resistor. 2. All oil-filled capacitors will be housed in corrosion-resistant steel cans and contain .25” quick disconnect terminals. 3. All capacitors will be supplied by ballast manufacturer. IGNITORS 1. All ignitors will be epoxy-filled with either a plastic or aluminum external housing. 2. The ignitor shall be so designed to provide six months of lamp open circuit operation without failure. KITS 1. All HID kits shall be precision wound to insure proper insulation. 2. All HID kits shall be pre-wired. 3. All HID kits shall be built with color-coded leads. HID 4. All HID kits are to be UL and CSA recognized following the guidelines found in UL 1029 and CAN/CSA-22.2 No. 74-92 (part 2 and 3). 5. Universal Model __________________________ (or approved equal). PAGE 4-11 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Distributor Replacement Kits Universal’s HID distributor replacement kits contain the appropriate core & coil, a properly rated capacitor, and all other components required for ballast replacement. Our kits are the quickest and easiest to install of any on the market, thanks to unique design features like: • • • • • Prewired capacitor and ignitor (if required) to save installation time and reduce wiring errors. Color-coded leads to reduce risk of incorrect wiring inside the fixture. Features that exceed UL standards, including capacitors that offer trip fault protection. Simple installation instructions and troubleshooting tips. UPS shippable box. Our kit offerings include many quad voltage (120, 208, 240, or 277 volt) and 480 volt core & coil ballasts, as well as the new Multi-5 five-voltage ballast. 480 volt ballasts are equipped with a 120 volt tap to accommodate stand by lighting. Also available for Metal Halide and High Pressure Sodium applications, Universal Lighting’s Multi-5TM Ballast-Lamp Replacement Kit. This easy to carry convenient all-in-one kit ensures ballast lamp compatibility. Distributor replacement kit cartons are packaged in master cartons in quantities from 1 to 6 units. Master carton quantities can be found on Universal’s list and distributor price sheets. Quad, 480 Volt, Multi-5™ and Multi-5™ Uni-Pak™ Distributor Replacement Kits Wattage Voltage Frame Size Old Part Number 175 120/208/240/277 3 x 4 1130-91R-500K M175MLTAC3M500K Multi-5™ Uni-Pak™ 175 3 x 4 New M175ML5AC3M555K LampType Metal Halide HID 175 250 175 250 Multi-5 480-120 120/208/240/277 Multi-5 250 Multi-5™ Uni-Pak™ 250 250 250 480-120 120/208/240/277 Multi-5 3 x 4 3 x 4 1130-31-500K 3 x 4 New 3 x 4 400 400 3 x 4 4.25 x 4.75 4.25 x 4.75 1130-826S-500K 480-120 4.25 x 4.75 1130-33R-500K Multi-5 4.25 x 5.75 New Multi-5™ Uni-Pak™ 4.25 x 5.75 1000 1000 1500 1500 New 4.25 x 4.75 New Multi-5 4.25 x 4.75 1000 1000 1130-32-500K 1130-92R-500K 4.25 x 4.75 New 480-120 120/208/240/277 Multi-5™ Uni-Pak™ 4.25 x 4.75 400 400 1130-92-500K 3 x 4 Multi-5™ Uni-Pak™ 4.25 x 4.75 250 250 New 120/208/240/277 4.25 x 5.75 480-120 4.25 x 5.75 480-120 4.25 x 5.75 120/208/240/277 4.25 x 5.75 1130-32R-500K 1130-93U-500K New 1130-97-500K New 1130-57-500K 1130-99R-500K 1130-69R-500K PAGE 4-12 New Part Number M175ML5AC3M500K M17548TAC3M500K M250MLTAC3M500K M250ML5AC3M500K M250ML5AC3M555K M25048TAC3M500K M250MLTAC4M500K M250ML5AC4M500K M250ML5AC4M555K M25048TAC4M500K M400MLTAC4M500K M400ML5AC4M500K M400ML5AC4M555K M40048TAC4M500K M1000MLTAC5M500K M1000ML5AC5M500K M1000ML5AC5M555K M100048TAC5M500K M1500MLTAC5M500K M150048TAC5M500K FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Distributor Replacement Kits Quad, 480 Volt, Multi-5™ and Multi-5™ Uni-Pak™ Distributor Replacement Kits LampType Wattage Voltage Frame Size 35 120/208/240/277 3 x 4 70 120/208/240/277 3 x 4 50 70 120/208/240/277 100 120/208/240/277 100 100 Pulse Start 150 120/208/240/277 150 175 175 175 120/208/240/277 120/208/240/277 Multi-5 3 x 4 New M100MLTLC3M 3 x 4 New 3 x 4 New 3 x 4 11310-543-500K 3 x 4 New 3 x 4 New 3 x 4 New 3 x 4 New 3 x 4 New 3 x 4 480-120 4.25 x 5.75 Multi-5 3 x 4 200 200 200 120/208/240/277 480-120 480-120 4.25 x 4.75 320 350 350 350 350 400 400 400 Multi-5 120/208/240/277 Multi-5 480-120 450 120/208/240/277 450 480-120 450 750 750 750 Multi-5 120/208/240/277 Multi-5 480-120 875 120/208/240/277 1000 Multi-5 1000 120/208/240/277 New New 4.25 x 4.75 New 4.25 x 4.75 480-120 New 1130-827-500K 480-120 Multi-5 New 4.25 x 4.75 4.25 x 4.75 120/208/240/277 New 4.25 x 4.75 Multi-5 Multi-5 New 3 x 4 250 120/208/240/277 New New 4.25 x 4.75 320 New 3 x 4 120/208/240/277 Multi-5 New 3 x 4 250 250 M70MLTLC3M500K 3 x 4 175 480-120 11310-510-500K New 4.25 x 5.75 175 M35MLTLC3M500K 4.25 x 4.75 New New 4.25 x 4.75 1130-829-500K 4.25 x 4.75 New 4.25 x 4.75 4.25 x 5.75 4.25 x 5.75 4.25 x 5.75 4.25 x 5.75 4.25 x 5.75 4.25 x 5.75 PAGE 4-13 M100MLTLC3D500K M10048TLC3M500K M150MLTLC3M500K M150MLTAC3M500K M150MLTLC3D500K M15048TLC3M500K P175MLTAC3M500K P175MLTAC3L500K P175ML5AC3M500K P175MLTAC4L500K P17548TAC3L500K P17548TAC4L500K P200MLTAC3L500K P200ML5AC3M500K P20048TAC3L500K P250MLTAC4L500K P250ML5AC4L500K P25048TAC4L500K P320MLTAC4O500K P32048TAC4L500K 4.25 x 4.75 4.25 x 4.75 M100MLTLC3O500K New 1130-622-500K 4.25 x 4.75 M70MLTLC3D500K P320ML5AC4M500K P350ML5AC4M 4.25 x 4.75 M7048TLC3M500K New 4.25 x 4.75 4.25 x 4.75 M50MLTLC3M500K New New New New New New New New New New P320ML5AC4L500K P350MLTAC4M500K P350ML5AC4O500K P350ML5AC4L500K P35048TAC4L500K P400MLTAC4L500K P400ML5AC4L500K P40048TAC4L500K P450MLTAC4L500K P450ML5AC4L500K P45048TAC4L500K P750MLTAC5M500K P750ML5AC5M500K P75048TAC5M500K P875MLTAC5M500K P1000MLTAC5M500K P1000ML5AC5M500K FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID 480-120 3 x 4 New Part Number New 11310-95-500K 120/208/240/277 320 120/208/240/277 3 x 4 175 480-120 120/208/240/277 150 320 120/208/240/277 150 Metal Halide 480-120 70 120/208/240/277 Old Part Number Distributor Replacement Kits Quad, 480 Volt, Multi-5™ and Multi-5™ Uni-Pak™ Distributor Replacement Kits LampType Wattage Voltage Frame Size 50 120/208/240/277 3 x 4 480-120 70 70 120/208/240/277 Old Part Number New Part Number 12310-95-500K S50MLTLC3M500K 3 x 4 12310-148R-500K S7048TLC3M500K 3 x 4 12310-30R-500K 3 x 4 12310-160S-500K 3 x 4 100 120/208/240/277 150 120/208/240/277 200 120/208/240/277 4.25 x 4.75 250 Multi-5 4.25 x 4.75 S250ML5AC4M 4.25 x 4.75 1230-32S-500K H.P.S. 100 150 200 250 250 480-120 480-120 480-120 120/208/240/277 480-120 3 x 4 12310-153-500K 3 x 4 4.25 x 4.75 4.25 x 4.75 250 Multi-5™ Uni-Pak™ 4.25 x 4.75 400 400 400 400 400 400 Multi-5 4.25 x 4.75 480-120 4.25 x 4.75 120/208/240/277 Multi-5 120/208/240/277 480-120 4.25 x 4.75 4.25 x 5.75 4.25 x 5.75 4.25 x 5.75 Multi-5™ Uni-Pak™ 4.25 x 4.75 400 600 120/208/240/277 4.25 x 5.75 1000 Multi-5 4.25 x 5.75 1000 Multi-5™ Uni-Pak™ 4.25 x 5.75 1000 New New 1230-92S-500K New New 1230-93U-500K 1230-33U-500K New 1230-93S-500K 1230-33S-500K New 1000 120/208/240/277 480-120 4.25 x 5.75 4.25 x 5.75 New New 1230-97S-500K New New 1230-57S-500K S100MLTLC3M500K S10048TLC3M500K S150MLTLC3O500K S15048TLC3M500K S200MLTAC4M500K S20048TAC4M500K S250ML5AC4O500K S250MLTAC4M500K S25048TAC4M500K S250ML5AC4M555K S400ML5AC4M500K S400MLTAC4M500K S40048TAC4M500K S400ML5AC5M500K S400MLTAC5M500K S40048TAC5M500K S400ML5AC4M555K S400ML5AC5M555K S600MLTAC5M500K S1000MLTAC5M500K S1000ML5AC5M500K S1000ML5AC5M555K S100048TAC5M500K HID S150MLTLC3M Multi-5™ Uni-Pak™ 4.25 x 4.75 400 12310-90-500K S70MLTLC3M500K PAGE 4-14 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Distributor Replacement Kits Canadian Tri-Tap Distributor Replacement Kits Wattage Voltage Frame Size Old Part Number New Part Number 175 120/277/347 3 x 4 1130-605-502K M175TRIAC30502K 250 120/277/347 4.25 x 4.75 1130-593R-502K M250TRIAC4M502K 120/277/347 4.25 x 5.75 1130-598-502K LampType Metal Halide 250 400 1000 35 1500 50 70 100 175 Pulse Start Metal Halide 150 200 250 320 350 400 750 70 100 200 H.P.S. 150 250 400 400 1000 120/277/347 120/277/347 120/277/347 120/277/347 120/277/347 120/277/347 120/277/347 120/277/347 120/277/347 120/277/347 3 x 4 4.25 x 4.75 4.25 x 5.75 3 x 4 3 x 4 3 x 4 11310-590-502K 11310-584-502K 3 x 4 New 3 x 4 4.25 x 4.75 120/277/347 120/277/347 120/277/347 New 11310-604-502K 3 x 4 120/277/347 120/277/347 1130-599-502K 3 x 4 4.25 x 4.75 120/277/347 M400TRIAC4M New 120/277/347 120/277/347 New New New 4.25 x 4.75 New New 4.25 x 4.75 4.25 x 5.75 New New 3 x 4 12310-579-502K 3 x 4 12310-588-502K 3 x 4 12310-584-502K 120/277/347 4.25 x 4.75 120/277/347 4.25 x 4.75 1230-595U-502K 4.25 x 5.75 1230-598S-502K 120/277/347 120/277/347 120/277/347 4.25 x 4.75 4.25 x 5.75 – 1230-593S-502K 1230-595S-502K M250TRIAC3M502K M400TRIAC4O502K M1000TRIAC5M502K M1500TRIAC5M502K M35TRILC3M502K M50TRILC3M502K M70TRILC3M502K M100TRILC3M502K M150TRILC3M502K P175TRIAC3M502K P200TRIAC3M502K P250TRIAC4M502K P320TRIAC4M502K P350TRIAC4M502K P400TRIAC4M502K P750TRIAC5M502K S70TRILC3M502K S100TRILC3M502K S150TRILC3M502K S200TRILC4M502K S250TRIAC4M502K S400TRIAC4M502K S400TRIAC5M502K S1000TRIAC5M502K HID PAGE 4-15 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) MH 175-250 WATT HID CORE & COIL BALLASTS METAL HALIDE • 6 0 Hz • Minimum starting temperature: -30° C • Normal and High Power Factor models available Nom Dimensions Capacitor Ignitor Max Open Total Max UL Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 175 WATT M57, M107 METAL HALIDE LAMP 120 or 2.15 5 M175TRIAC30 CWA 211 0.95 305 3 PC1 2.45 3.75 10 400 1.65 3.82 1.56x2.69 2.7 6.8 n/a n/a C 277 or 2 347 0.75 2 120 or 1.90 5 A 208 or M175MLTAC3M CWA 213 1.10 3 C 305 1 PC1 2.2 3.6 10 400 1.65 2.83 1.56x2.69 2.7 6.1 n/a n/a 240 or 0.95 3 B 277 0.85 2 C 120 or 1.90 8 208 or 1.10 5 240 or M175ML5AC3M CWA 208 0.95 300 3 2 PC1 2.3 3.60 10 400 1.65 2.83 1.56x2.69 2.7 6.75 n/a n/a B 277 or 0.85 3 480 0.50 2 480 M17548TAC3M CWA 210 0.51 315 2 4 PC1 2.0 3.3 10 400 1.65 2.83 1.56x2.69 2.7 5.6 n/a n/a D (1) 250 WATT M58 METAL HALIDE LAMP - 4” Frame 120 or 2.8 8 B 277 or M250TRIAC3M CWA 295 1.20 320 3 3 PC1 3.0 4.35 15 400 1.65 3.82 1.91x2.91 2.7 8.0 n/a n/a D 347 0.95 3 D 120 or 2.60 8 208 or M250MLTAC3M CWA 297 1.50 315 5 1 PC1 3.0 4.25 15 400 1.65 3.82 1.91x2.91 2.7 9.0 n/a n/a D 240 or 1.30 4 277 1.10 3 120 or 2.50 8 A 208 or 1.40 5 A 240 or M250ML5AC3M CWA 295 1.25 285 4 2 PC1 3.0 4.5 15 400 1.65 3.82 1.91x2.91 2.7 9.2 n/a n/a B 277 or 1.10 3 C 480 0.65 2 B 347 M250347AC3M CWA 295 0.95 320 3 6 PC1 3.0 4.35 15 400 1.65 3.82 1.91x2.91 2.7 8.0 n/a n/a D 480 M25048TAC3M CWA 292 0.64 320 2 4 PC1 3.0 4.3 15 400 1.65 3.82 1.91x2.91 2.7 9.0 n/a n/a D Capacitors are available as an option for high power factor operation. See page 4-19 for Reference Drawings and Wiring Diagrams. HID CORE & COIL 3 PAGE 4-16 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID CORE & COIL BALLASTS METAL HALIDE • • • • 6 0 Hz Minimum starting temperature: -30° C High Power Factor models available Feature CWA design MH 250-400 WATT Nom Dimensions Capacitor Ignitor Max Open Total Max UL Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 250 WATT M58 METAL HALIDE LAMP - 4.75” Frame 120 or 3.05 8 277 or M250TRIAC4M CWA 290 1.25 305 3 3 PC2 1.63 3.63 15 400 1.65 3.82 1.91x2.91 2.7 9.5 n/a n/a B 347 1.05 3 120 or 2.40 8 208 or 1.40 5 310 1 PC2 3.35 3.53 15 400 1.65 3.82 1.91x2.91 2.7 8.0 n/a n/a B M250MLTAC4M CWA 290 240 or 1.20 4 277 1.05 4 120 or 2.42 8 208 or 1.40 5 n/a n/a A 240 or M250ML5AC4M CWA 290 1.20 300 4 2 PC2 1.82 3.62 15 360 1.65 3.82 1.91x2.91 2.7 10.8 277 or 1.00 3 480 0.60 2 480 M25048TAC4M CWA 290 0.61 300 2 4 PC2 1.82 3.62 15 360 1.65 3.82 1.91x2.91 2.7 10.8 n/a n/a B (1) 400 WATT M59 METAL HALIDE LAMP 120 M400120AC4M CWA 454 4.00 300 10 5 PC2 2.0 3.86 24 360 1.85 3.82 1.91x2.91 3.1 9.3 n/a n/a E 120 or 3.90 10 C 277 or M400TRIAC40 CWA 455 1.70 295 5 3 PC2 2.15 3.90 24 360 1.85 3.82 1.91x2.91 3.1 10.5 n/a n/a D 347 1.35 4 D 120 or 4.00 10 208 or 2.30 8 M400MLTAC4M CWA 458 300 1 PC2 2.0 3.86 24 360 1.85 3.82 1.91x2.91 3.1 10.0 n/a n/a E 240 or 2.00 5 277 1.70 5 120 or 4.00 10 208 or 2.30 8 240 or M400ML5AC4M CWA 458 2.00 300 5 2 PC2 2.0 3.86 24 360 1.85 3.82 1.91x2.91 3.1 11.0 n/a n/a E 277 or 1.70 5 480 1.00 50 480 M40048TAC4M CWA 458 1.00 300 3 4 PC2 2.0 3.9 24 360 1.85 3.82 1.91x2.91 3.1 11.0 n/a n/a E See page 4-19 for Reference Drawings and Wiring Diagrams. HID CORE & COIL PAGE 4-17 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) MH 1000-1500 WATT HID CORE & COIL BALLASTS METAL HALIDEFEATURING MULTI-5™ • 60 HZ. •M inimum Starting Temperature: -30° C • F eature CWA Design Nom Dimensions Capacitor Ignitor Max Open Total Max UL Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 1000 WATT M47 METAL HALIDE LAMP 120 M1000120AC5M CWA 1080 9.00 425 23 5 PC3 2.9 4.75 24 480 n/a n/a 1.91x2.91 3.9 18.0 n/a n/a D 120 or 9.00 20 D 277 or M1000TRIAC5M CWA 1080 3.90 435 10 3 PC3 3.0 4.95 24 480 n/a n/a 1.91x2.91 3.9 19.0 n/a n/a D 347 3.20 8 E 120 or 8.95 20 208 or 5.15 15 425 1 PC3 2.9 5.05 24 480 n/a n/a 1.91x2.91 3.9 22.0 n/a n/a D M1000MLTAC5M CWA 1080 240 or 4.50 10 277 3.90 10 120 or 9.15 20 F 208 or 5.25 15 E n/a n/a E 240 or M1000ML5AC5M CWA 1080 4.55 420 10 2 PC3 2.9 5.05 24 480 n/a n/a 1.91x2.91 3.9 22.0 277 or 3.95 10 E 480 2.30 6 E 480 M100048TAC5M CWA 1080 2.30 410 6 4 PC3 2.85 4.75 24 480 n/a n/a 1.91x2.91 3.9 22.0 n/a n/a D (1) 1500 WATT M48 METAL HALIDE LAMP 120 or 13.70 40 277 or M1500TRIAC5M CWA 1610 6.00 460 20 17 PC3 4.38 6.38 32 525 n/a n/a 1.96x3.65 3.88 29.5 n/a n/a G 347 4.70 15 120 or 14.30 40 F 208 or M1500MLTAC5M CWA 1615 8.30 455 25 48 PC3 4.4 6.4 32 525 n/a n/a 1.96x3.65 3.88 30.0 n/a n/a G 240 or 7.20 20 F 277 6.20 20 E 480 M150048TAC5M CWA 1620 3.50 445 10 15 PC3 4.4 6.4 32 525 n/a n/a 1.96x3.65 3.88 30.0 n/a n/a E HID CORE & COIL See page 4-19 for Reference Drawings and Wiring Diagrams. PAGE 4-18 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID CORE & COIL BALLASTS MH METAL HALIDE DESCRIPTION SUFFIX * For Ballast Only For Bracket Only (see pg. 5-7) For Capacitor Only (see pg. 5-5, 5-6) For Distributor Replacement Kit (see pg. 5-13 thru 5-15) For Canadian Distributor Replacement Kit (see pg. 5-16) For Dry-Capacitor & Ballast (see pg. 5-6) For Bracket & Capacitor (see pg. 5-5, 5-7) For Bracket & Dry-Capacitor (see pg. 5-6, 5-7) REFERENCE DRAWING PC1 000 200 500 W S M L 500K BRef. Dwg. 1 PC1 PC2 PC3 502K 518 700 L W M S 4.00” 0.75” 3.35” 0.25” 5.25” 1.25” 4.60” 0.25” 7.75” 2.75” 6.10” 0.25” 7.75” 2.75” 6.10” 0.25” See p. 5-7 for adjustable mounting brackets and detailed bracket drawings. 718 REFERENCE DRAWING PC2 REFERENCE DRAWING PC3 4 Holes Cleared for #10 Thru-Bolts 4 Holes Cleared for #10 Thru-Bolts 8 Holes Cleared for #10 Thru-Bolts A A B MAX A B MAX B MAX 2.812˝ 2 Holes Cleared for #10 Thru-Bolts 2.438˝ Bracket 3.500˝ 3.938˝ 4.250˝ 2 Holes Cleared for #10 Thru-Bolts 3.875˝ 2 Holes Cleared for #10 Thru-Bolts 4.250˝ 4.375˝ 4.750˝ 3.875˝ 4.375˝ 5.375˝ 5.750˝ WIRING DIAGRAMS Wiring Diagram 1 Wiring Diagram 2 Wiring Diagram 3 Wiring Diagram 4 Wiring Diagram 5 Wiring Diagram 6 HID CORE & COIL Wiring Diagram 16 Note: Nominal dimensions provided above Contact Universal for drawings and/or tolerances PAGE 4-19 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) PULSE START MH 35/39-100 WATT HID CORE & COIL BALLASTS PULSE START METAL HALIDE • 6 0 Hz • Minimum starting temperature: -30° C • Normal and High Power Factor models available Nom Dimensions Capacitor Ignitor Max Open Total Max UL Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 35/39 WATT M130 METAL HALIDE LAMP 120 or .84 2 277 or M35TRILC3M HX-HPF 54 .40 235 1 9 PC1 0.85 2.15 5 300 1.26 2.36 1.31x2.16 2.2 1.7 MH100-3A 5 A 347 .30 1 120 or .82 2 208 or .48 1 M35MLTLC3M HX-HPF 50 230 10 PC1 0.85 2.0 5 277 1.26 2.83 1.31x2.16 2.2 240 or .42 1 277 .36 1 (1) 50 WATT M110 METAL HALIDE LAMP — Medium Base 120 or 1.30 3 277 or M50TRILC3M HX-HPF 67 .61 250 2 9 PC1 1.05 2.55 6 300 1.26 2.83 1.31x2.16 2.2 347 .48 2 1.25 3 120 or 208 or 0.70 3 255 10 PC1 1.05 2.40 6 300 1.26 2.83 1.31x2.16 2.2 M50MLTLC3M HX-HPF 65 240 or 0.60 2 277 0.55 2 1.7 MH100-3A 5 A 4.25 MH100-3A 10 A 3.6 A MH100-3A 10 HID CORE & COIL (1) 70 WATT M98 / M143 (C98) METAL HALIDE LAMP - Medium Base 120 or 1.85 4 277 or M70TRILC3M HX-HPF 91 0.80 260 2 9 PC1 1.5 2.65 8 280 1.65 2.83 1.31x2.16 2.2 5.0 MH100-3A 10 A 347 0.65 2 120 or 1.70 4 208 or 1.00 3 M70MLTLC3M HX-HPF 90 255 10 PC1 1.30 2.65 8 280 1.65 2.83 1.31x2.16 2.2 4.5 MH100-3A 10 A 240 or 0.85 2 277 0.75 2 480 M7048TLC3M HX-HPF 95 0.45 260 1 8 PC1 1.35 2.80 8 300 1.65 2.83 1.31x2.16 2.2 4.2 MH100-3A 10 E (1) 70 WATT M85 METAL HALIDE LAMP - Double Ended 120 or 1.70 4 208 or 1.00 3 A 255 10 PC1 1.30 2.65 8 280 1.65 2.83 1.31x2.16 4.5 4.25 MH70-3B 10 M70MLTLC3D HX-HPF 90 240 or 0.85 2 277 0.75 2 (1) 100 WATT M90 / M92 / M140 METAL HALIDE LAMP - Medium Base 120 or 2.60 7 277 or M100TRILC3M HX-HPF 129 1.15 265 3 9 PC1 1.6 2.95 12 280 1.65 2.83 1.31x2.16 3.13 5.5 MH100-3A 10 A 347 0.90 3 120 or 2.60 8 C 1.55 5 C 208 or M100MLTLC30 HX-HPF 127 260 10 PC1 1.5 2.8 12 280 1.65 2.83 1.31x2.16 n/a 4.5 MH100-3A 10 240 or 1.30 4 B 277 1.15 4 B 480 M10048TLC3M HX-HPF 132 0.62 285 2 8 PC1 1.7 3.0 10 300 1.65 2.83 1.31x2.16 2.7 5.5 MH100-3A 10 C (1) 100 WATT M91 METAL HALIDE LAMP - Double Ended 120 or 2.60 8 C 208 or 1.55 5 C M100MLTLC3D HX-HPF 127 260 10 PC1 1.5 2.8 12 280 1.65 2.83 1.31x2.16 3.13 4.5 MH70-3B 10 240 or 1.30 4 B 277 1.15 4 B 3 See page 4-26 for Reference Drawings and Wiring Diagrams. Capacitors are available as an option for high power factor operation. PAGE 4-20 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID CORE & COIL BALLASTS PULSE START METAL HALIDE • 60 Hz •M inimum Starting Temperature: -40° C • F eature CWA Design PULSE START MH 150-200 WATT HID CORE & COIL Nom Dimensions Capacitor Ignitor Max Open Total Max UL Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 150 WATT M102/M142 METAL HALIDE LAMP - Medium Base RX-NPF 277 M150277RCEM 171 0.65 277 4 7 5 2.52 3.80 14 280 1.65 2.83 n/a n/a 4.0 MH100-1A 3 B RX-HPF 120 or 3.32 10 277 or M150TRILC3M HX-HPF 185 1.48 245 4 9 PC1 2.38 3.65 16 280 1.65 2.83 1.56x2.69 2.7 7.25 MH100-3A 10 D 347 0.65 2 120 or 3.40 10 208 or M150MLTLC3M HX-HPF 185 1.93 260 5 10 PC1 2.38 3.7 16 280 1.65 2.83 1.56x2.69 2.7 7.0 MH100-3A 10 A 240 or 1.70 5 277 1.50 4 120 or 1.60 4 C 208 or M150MLTAC3M CWA 188 1.00 210 3 1 PCI 2.5 3.75 16 330 1.65 3.82 n/a n/a 7.1 MH150-1A 10 D 0.80 3 C 240 or 277 0.70 2 C 480 M15048TLC3M HX-HPF 185 1.00 260 3 8 PC1 2.3 3.6 16 280 1.65 2.83 1.56x2.69 2.7 7.0 MH100-3A 10 F (1) 150 WATT M81 METAL HALIDE LAMP - Double Ended 120 or 3.40 10 208 or 1.95 5 M150MLTLC3D HX-HPF 185 260 10 PC1 2.38 3.70 16 280 1.65 2.83 1.56x2.69 2.7 7.0 MH70-3B 10 A 1.70 5 240 or 277 1.50 4 (1) 175 WATT M152 / M137 METAL HALIDE PULSE START LAMP (4” FRAME) RX-NPF 1.25 n/a n/a n/a n/a 277 P175277RCEM 199 277 3 7 5 2.5 3.6 12 280 3.9 MH350-1A 10 C RX-HPF 2.00 1.65 2.83 1.31x2.16 3.9 120 or 2.00 5 277 or P175TRIAC3M CWA 208 0.90 310 2 3 PC1 2.5 3.6 10 400 1.65 2.83 1.31x2.16 3.9 6.75 MH350-1A 10 B 347 0.70 2 120 or 2.09 5 208 or P175MLTAC3M CWA 208 1.26 306 3 1 PC1 2.5 3.6 10 400 1.65 2.83 1.31x2.16 3.9 6.75 MH350-1A 10 A 240 or 1.02 3 277 0.96 2 120 or 1.95 5 208 or P175MLTAC3L CWA 198 1.10 285 3 1 PC1 3.10 4.20 11 370 1.65 2.83 n/a n/a 8.5 MH350-1A 2 A 240 or 1.00 3 277 0.80 2 120 or 1.80 5 208 or 1.05 3 240 or P175ML5AC3M CWA 210 0.90 295 3 4 PC1 2.65 4.0 10 400 1.65 2.83 1.91x2.91 2.7 8.0 MH350-1A 10 B 277 or 0.80 2 480 0.45 2 480 P17548TAC3L CWA 198 0.50 285 2 2 PC1 3.10 4.20 11 360 1.65 2.83 n/a n/a 8.5 MH350-1A 2 A (1) 175 WATT M152/M137 METAL HALIDE PULSE START LAMP (5” FRAME) 120 or 1.70 5 208 or P175MLTAC4L CWA 198 0.95 270 3 1 PC2 1.77 3.3 12.5 330 1.65 2.83 n/a n/a 9.45 MH350-1A 10 A 240 or 0.85 3 277 0.75 2 480 P17548TAC4L CWA 198 0.40 275 2 4 PC2 1.80 3.5 12.5 330 1.65 2.83 n/a n/a 9.6 MH350-1A 10 A See page 4-26 for Reference Drawings and Wiring Diagrams. PAGE 4-21 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) PULSE START MH 200-320 WATT HID CORE & COIL BALLASTS PULSE START METAL HALIDE • 60 Hz • Minimum Starting Temperature: -40° C • CWA and High Power Factor Models Available HID CORE & COIL Nom Dimensions Capacitor Ignitor Max Open Total Max UL Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 200 WATT M136 METAL HALIDE PULSE START LAMP 277 P200277RCEM RX-HPF 218 1.35 277 4 7 5 1.06 2.82 13 280 1.65 3.83 n/a n/a 4.7 MH350-1A 10 A 120 or 2.70 6 277 or P200TRIAC3M CWA 240 1.04 310 3 3 PC1 2.75 3.95 11 400 1.65 2.83 2.7 3.6 8.0 MH350-1A 10 C 347 0.87 3 120 or 2.10 7 208 or 1.22 5 240 or P200MLTAC3L CWA 227 1.05 245 4 1 PC1 2.90 4.25 15 330 1.85 3.82 n/a n/a 9.0 MH100-5A 10 A 277 0.95 4 (1) 200 WATT M136 METAL HALIDE PULSE START LAMP 120 or 2.66 6 208 or 1.52 4 240 or P200ML5AC3M CWA 233 1.31 303 3 2 PC1 2.75 4.30 11 400 1.65 2.83 n/a n/a 8.0 MH350-1A 10 C 277 or 1.12 3 480 0.68 2 480 A P20048TAC3L CWA 227 0.50 245 2 4 PC1 2.9 4.25 15 330 1.85 3.82 n/a n/a 9.0 MH100-5A 10 (1) 250 WATT M153 METAL HALIDE PULSE START LAMP RX-NPF 2.00 5 n/a n/a n/a n/a 277 P250277RCEM 278 7 5 1.06 2.82 17.5 280 4.8 MH350-1A 10 A 277 RX-HPF 1.85 5 1.6 3.82 1.56x2.69 3.1 120 or 2.35 8 277 or P250TRIAC4M CWA 300 1.15 292 3 3 PC2 1.36 3.36 14 400 1.6 3.782 2.3 4.0 9.0 MH350-1A 10 A 347 .098 3 120 or 2.40 8 208 or P250MLTAC4L CWA 283 1.40 270 5 1 PC2 2.05 3.90 17 330 1.65 3.82 n/a n/a 11.0 MH350-1A 15 A 240 or 1.20 5 277 1.05 3 120 or 2.50 8 208 or 1.40 5 240 or P250ML5AC4L CWA 283 1.25 270 5 2 PC2 1.85 3.75 17 330 1.65 3.82 n/a n/a 10.5 MH350-1A 10 A 277 or 1.05 3 480 0.60 2 480 P25048TAC4L CWA 283 0.60 275 2 4 PC2 1.9 3.6 17 360 1.65 3.82 n/a n/a 10.0 MH350-1A 10 A (1) 320 WATT M132 / M154 METAL HALIDE PULSE START LAMP RX-NPF 3.70 10 n/a n/a n/a n/a 277 P320277RCEM 348 277 7 5 1.5 3.28 22.5 280 6.8 MH350-1A 10 A RX-HPF 2.34 6 1.865 3.115 n/a n/a 120 or 3.85 8 277 or P320TRIAC4M CWA 370 1.70 280 4 3 PC2 2.0 3.73 20.5 360 1.85 3.82 1.91x2.91 3.1 11.0 MH350-1A 10 C 347 1.30 3 120 or 3.10 9 B A 208 or P320MLTAC40 CWA 364 1.80 275 5 1 PC2 2.0 3.9 21.0 360 1.85 3.82 1.91x2.91 3.1 11.0 MH350-1A 10 240 or 1.55 5 B 277 1.35 4 A 120 or 4.00 10 D 208 or 2.40 7 C D 240 or P320ML5AC4M CWA 370 2.10 280 5 2 PC2 2.0 3.86 20.5 360 1.8 3.82 1.91x2.91 3.6 11.3 MH350-1A 10 277 or 1.85 5 D 480 1.00 3 C See page 4-26 for Reference Drawings and Wiring Diagrams. PAGE 4-22 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID CORE & COIL BALLASTS PULSE START METAL HALIDE • 60 Hz • Minimum Starting Temperature: -40° C • Feature CWA Design PULSE START MH 320-350 WATT Capacitor Ignitor Nom Dimensions Max Open Total Max UL Oil Filled Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 320 WATT M132 / M154 METAL HALIDE PULSE START LAMP 120 or 3.10 8 208 or 1.80 5 240 or P320ML5AC4L CWA 363 1.55 275 5 2 PC2 1.88 3.8 21 360 1.85 3.82 2.91 3.13 12.0 MH350-1A 10 A 277 or 1.35 4 480 0.80 3 480 CWA 364 0.80 280 3 4 PC2 2.0 3.9 21 360 1.85 3.82 2.91 3.13 11.0 MH350-1A 10 A P32048TAC4L (1) 350 WATT M131 METAL HALIDE PULSE START LAMP RX-NPF 3.80 10 — — — — 277 377 277 7 5 1.5 3.28 22.5 280 6.8 MH350-1 10 A P350277RCEM RX-HPF 2.35 6 1.65 3.82 1.56x2.69 3.9 120 or 4.85 10 277 or P350TRIAC4M CWA 405 1.70 280 5 3 PC2 2.0 4.0 21 360 1.85 3.82 2.9 3.1 11.5 MH350-1A 10 C 347 1.30 3 120 or 3.40 9 208 or P350MLTAC4M 2.00 6 CWA 400 275 1 PC2 2.0 3.9 22 360 n/a n/a 2.7 3.9 11.0 MH350-1A 10 C 240 or 1.70 5 277 1.45 4 120 or 3.25 9 B 208 or 1.80 6 1 PC2 1.92 3.95 22.5 345 1.85 3.82 n/a n/a 10.0 MH350-1A 10 B P350MLTAC4O CWA 397 270 240 or 1.60 C 5 277 1.40 4 C 120 or 3.35 9 208 or 1.85 6 240 or P350ML5AC4O CWA 397 1.65 280 5 4 PC2 2.2 4.25 22.5 345 1.85 3.82 n/a n/a 12 MH350-1A 10 B 277 or 1.40 4 480 0.80 3 120 or 3.35 10 208 or 1.90 7 240 or P350ML5AC4L CWA 397 1.65 275 9 4 PC2 1.88 3.8 22 360 1.85 3.82 2.69 3.9 12.0 MH350-1A 10 B 277 or 1.45 5 480 0.85 3 480 P35048TAC4O CWA 398 0.85 280 3 4 PC2 2.00 3.95 22.5 345 1.85 3.82 n/a n/a 11.0 MH350-1A 10 D 480 P35048TAC4L CWA 397 0.85 280 3 4 PC2 2.00 3.9 22 360 1.85 3.82 2.69 3.9 11.0 MH350-1A 10 C See page 4-26 for Reference Drawings and Wiring Diagrams. HID CORE & COIL See page 5-29 for Reference Drawings and Wiring Diagrams. PAGE 4-23 PULSE START MH 400 WATT HID CORE & COIL BALLASTS PULSE START METAL HALIDE • 60 Hz •M inimum Starting Temperature: -40° C •C WA and High Power Factor Models Available Nom Dimensions Capacitor Ignitor Max Open Total Max UL Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 400 WATT M155 / M135 / M128 / M172 METAL HALIDE PULSE START LAMP 120 or 4.05 10 277 or P400TRIAC4M CWA 454 1.75 285 5 3 PC2 2.0 3.9 24 400 1.85 3.82 1.91x2.91 3.1 12 MH350-1A 10 D 347 1.40 4 120 or 3.90 10 B 208 or P400MLTAC4L CWA 454 2.25 280 7 1 PC2 2.30 4.20 26 330 1.85 3.82 n/a n/a 11 MH350-1A 10 B 240 or 1.95 5 B 277 1.70 5 C 120 or 3.90 10 208 or 2.25 7 240 or P400ML5AC4M CWA 457 1.95 285 5 26 PC2 2.0 3.9 24 400 1.85 3.82 1.91x2.91 3.1 12.5 MH350-1A 10 D 277 or 1.70 5 480 0.95 3 120 or 3.90 10 C 208 or 2.25 7 D 240 or P400ML5AC4L CWA 454 1.90 280 5 2 PC2 2.35 4.25 26 330 1.85 3.82 1.91x2.91 3.1 12 MH350-1A 10 C 277 or 1.65 5 C 480 0.95 3 D 480 P40048TAC4L CWA 454 1.00 285 3 4 PC2 2.35 4.25 26 330 1.85 3.82 n/a n/a 12.5 MH350-1A 10 D 480 P40048TAC4M CWA 457 1.00 285 3 4 PC2 2.0 3.9 24 400 1.85 3.82 1.91x2.91 3.1 12 MH350-1A 10 D HID CORE & COIL See page 4-26 for Reference Drawings and Wiring Diagrams. PAGE 4-24 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID CORE & COIL BALLASTS PULSE START METAL HALIDE • 60 Hz •M inimum Starting Temperature: -40° C •C WA and High Power Factor Models Available PULSE START MH 450-1000 WATT See page 4-26 for Reference Drawings and Wiring Diagrams. PAGE 4-25 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID CORE & COIL Nom Dimensions Capacitor Ignitor Max Open Total Max UL Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 450 WATT M144 METAL HALIDE PULSE START LAMP 120 or 4.35 10 B 208 or 2.55 8 C 280 1 PC2 2.25 4.0 26.5 400 1.85 4.76 1.91x2.91 3.9 13.0 MH350-1A 10 P450MLTAC4L CWA 508 240 or 2.15 7 C 277 1.90 5 C 120 or 4.10 12 C 208 or 2.35 8 B 240 or P450ML5AC4L CWA 508 2.05 280 7 2 PC2 2.65 4.55 26.5 360 1.85 4.76 1.91x2.91 3.9 15.5 MH350-1 10 C 277 or 1.85 5 C 480 1.05 4 B 480 P45048TAC4L CWA 511 1.05 277 3 4 PC2 2.40 4.25 26.5 360 1.85 4.76 1.91x2.91 3.9 14.5 MH350-1A 10 D (1) 750 WATT M149 METAL HALIDE PULSE START LAMP 120 or 7.05 15 B 277 or P750TRIAC5M CWA 820 3.05 340 8 3 PC3 2.8 4.6 28 400 n/a n/a 1.91x2.91 3.88 18.0 P750-1B 10 C 347 2.45 8 C 120 or 7.10 18 D A 208 or 4.10 10 340 1 PC3 2.8 4.8 28 400 n/a n/a 1.91x2.91 3.88 18.0 P750-1B 10 P750MLTAC5M CWA 825 240 or 3.55 10 B 277 3.10 8 B 120 or 6.95 18 C 208 or 4.00 10 C 240 or P750ML5AC5M CWA 820 3.50 340 10 2 PC3 2.8 4.9 28 400 n/a n/a 1.91x2.91 3.88 19.0 P750-1B 15 D 277 or 3.00 8 D 480 1.75 5 C 480 P75048TAC5M CWA 822 1.80 335 5 4 PC3 2.8 4.75 28 400 n/a n/a 1.91x2.91 3.88 18.0 P750-1B 10 D (1) 875 WATT M166 METAL HALIDE PULSE START LAMP 120 or 7.90 20 D C 208 or 4.55 15 395 1 PC3 2.8 4.8 24 480 n/a n/a 1.91x2.91 3.9 17.5 HPS1000-4B 10 P875MLTAC5M CWA 945 240 or 3.95 10 A 277 3.45 10 C (1) 1000 WATT M141 METAL HALIDE PULSE START LAMP 120 or 9.00 20 208 or 5.20 15 420 1 PC3 2.9 5.05 24 480 n/a n/a 1.91x2.91 3.9 22.0 HPS1000-4B 20 D P1000MLTAC5M CWA 1080 4.50 10 240 or 277 3.90 10 120 or 8.95 20 G 208 or 5.15 15 B 240 or P1000ML5AC5M CWA 1080 4.45 420 10 2 PC3 2.9 5.05 24 480 n/a n/a 1.91x2.91 3.9 22.0 HPS1000-4B 20 C 277 or 3.85 10 C 480 2.25 10 C 480 P100048TAC5M CWA 1080 2.30 410 6 4 PC3 2.85 4.75 24 480 n/a n/a 1.91x2.91 3.9 18.0 HPS1000-4B 15 D2 PULSE START MH HID CORE & COIL BALLASTS PULSE START METAL HALIDE DESCRIPTION SUFFIX * For Ballast Only For Bracket Only (see pg. 5-7) For Capacitor Only (see pg. 5-5, 5-6) For Distributor Replacement Kit (see pg. 5-13 thru 5-15) For Canadian Distributor Replacement Kit (see pg. 5-16) For Dry-Capacitor & Ballast (see pg. 5-6) For Bracket & Capacitor (see pg. 5-5, 5-7) For Bracket & Dry-Capacitor (see pg. 5-6, 5-7) 000 200 500 REFERENCE DRAWING PC1 REFERENCE DRAWING PC2 4 Holes Cleared for #10 Thru-Bolts 4 Holes Cleared for #10 Thru-Bolts A A B MAX B MAX 2.812˝ 2 Holes Cleared for #10 Thru-Bolts 500K 502K 3.875˝ 2.438˝ 3.500˝ 3.938˝ 4.250˝ 2 Holes Cleared for #10 Thru-Bolts 4.375˝ 4.750˝ 518 700 REFERENCE DRAWING PC3 718 REFERENCE DRAWING 5 8 Holes Cleared for #10 Thru-Bolts A B MAX W Bracket 2 Holes Cleared for #10 Thru-Bolts S M L BRef. Dwg. PC1 PC2 PC3 RX1 4.250˝ L W M S 5.25” 1.25” 4.60” 0.25” 7.75” 1.25” 5.75” 0.25” 7.75” 2.75” 6.10” 0.25” 4.00” 0.75” 3.35” 0.25” 3.875˝ 4.375˝ 5.375˝ 5.750˝ See p. 5-7 for adjustable mounting brackets and detailed bracket drawings. HID CORE & COIL WIRING DIAGRAMS Wiring Diagram 1 Wiring Diagram 2 Wiring Diagram 3 Wiring Diagram 4 Wiring Diagram 7 Wiring Diagram 8 Wiring Diagram 10 Wiring Diagram 9 Note: Nominal dimensions provided above Contact Universal for drawings and/or tolerances PAGE 4-26 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID CORE & COIL BALLASTS HIGH PRESSURE SODIUM HPS 35-100 • 60 Hz • Minimum Starting Temperature: -40° C • Normal and High Power Factor Models WATT 1 Also can be used on a 277 volt line in conjuction with the step down transformers Capacitors are available as an option for High Power Factor operation ◆ Ballast has built-in starter. 3 PAGE 4-27 See pages 4-31 and 4-32 for Reference Drawings and Wiring Diagrams. FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID CORE & COIL Nom Dimensions Capacitor Ignitor Max Open Total Max UL Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 35 WATT S76 HIGH PRESSURE SODIUM LAMP 0.65 2 HPS150-3A 1201 1233-251W ◆ R-HPF 3 43 120 11 1 0.63 2.0 14 120 1.87 2.25 1.56x2.69 2.7 1.5 3 A 1.15 3 Permanently Attached RX-NPF 0.85 120 2 120 S35120RCEM 44 7 5 0.55 1.75 14 220 1.87 2.25 1.9 2.3 1.2 HPS150-3A 10 A RX-HPF 0.65 3 (1) 50 WATT S68 HIGH PRESSURE SODIUM LAMP 0.90 3 HPS150-3A 1201 1233-35W ◆ R-HPF 3 60 120 11 1 0.94 2.40 20 120 1.65 2.83 1.56x2.69 3.1 2.0 3 A 1.50 5 Permanently Attached RX-NPF 0.90 3 120 S50120RCEM 60 120 7 5 0.83 1.95 20 240 1.87 2.25 1.9 2.3 1.5 HPS150-3A 3 A RX-HPF 1.10 4 120 or 1.24 5 208 or 0.60 3 130 10 PC1 1.3 2.7 5 300 1.2 2.2 2.2 2.2 4.1 HPS150-3A 5 A S50MLTLC3M HX-HPF 66 240 or 0.52 3 277 0.45 2 (1) 70 WATT S62 HIGH PRESSURE SODIUM LAMP 1.30 8 HPS150-3A 120 1233-142W ◆ R-HPF 83 120 11 1 1.32 2.7 2.8 120 1.65 4.75 n/a n/a 2.5 3 A Permanently Attached 2.10 8 RX-NPF 1.30 4 120 S70120RCEM 82 120 7 5 1.10 2.25 28 120 1.87 2.25 1.3 2.7 2.0 HPS150-3A 3 A RX-HPF 210 6 120 or 1.50 4 B 277 or S70TRILC3M HX-HPF 94 0.65 120 2 9 PC1 1.38 2.7 7 280 1.65 2.83 1.31x2.16 2.2 4.4 HPS150-3A 10 A 347 0.50 2 A 120 or 1.50 5 208 or S70MLTLC3M HX-HPF 98 0.88 120 3 10 PC1 1.38 2.74 7 280 1.65 2.83 1.31x2.16 2.2 4.1 HPS150-3A 10 B 240 or 0.75 3 277 0.65 2 480 S7048TLC3M HX-HPF 94 0.34 120 2 8 PC1 1.85 3.0 7 280 1.65 3.00 1.31x2.16 2.2 6.0 HPS150-3A 10 A (1) 100 WATT S54 HIGH PRESSURE SODIUM LAMP - 1.80 5 HPS150-3A 120 1 1233-10W ◆ R-HPF 3 114 120 11 1 1.5 2.9 40 120 1.87 2.78 1.87 2.9 2.8 3 A 2.90 8 Permanently Attached RX-NPF 2.90 8 120 S100120RCEM 115 120 7 5 1.50 2.75 40 120 1.87 2.78 1.8 2.7 2.0 HPS150-3A 10 A RX-HPF 1.80 5 120 or 2.20 8 277 or S100TRILC3M HX-HPF 130 0.95 120 3 9 PC1 2.0 3.5 10 330 1.2 2.7 1.31x2.16 2.7 5.9 HPS150-3A 10 B 347 0.69 2 120 or 2.20 7 208 or S100MLTLC3M HX-HPF 122 1.30 120 5 10 PC1 2.0 3.36 10 280 1.26 2.83 1.31x2.16 2.7 6.0 HPS150-3A 10 B 240 or 1.10 3 277 0.95 3 480 S10048TLC3M HX-HPF 132 0.57 120 2 8 PC1 2.0 3.3 10 280 1.26 2.83 1.31x2.16 2.2 6.0 HPS150-3A 5 E HPS 150-250 HID CORE & COIL WATT HID CORE & COIL BALLASTS HIGH PRESSURE SODIUM • 60 Hz • Minimum Starting Temperature: -40° C • CWA, Normal and High Power Factor Models Nom Dimensions Capacitor Ignitor Max Open Total Max UL Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 150 WATT S55 HIGH PRESSURE SODIUM LAMP 2.35 6 HPS150-3A 1233-154W ◆ R-HPF 3 170 120 1 120 11 1 2.0 3.4 52 240 1.85 3.82 2.12 2.9 3.5 3 A Permanently Attached 4.40 12 RX-NPF 2.35 12 120 S150120RCEM 170 120 7 5 2.0 3.05 50 120 1.87 n/a 2.0 2.9 3.25 HPS150-3A 3 A RX-HPF 4.40 6 120 or 3.10 10 B S15027TLC3M HX-HPF 188 120 12 PC1 2.5 3.85 14 280 1.65 2.83 1.56x2.69 2.7 7.0 HPS150-3A 10 277 1.30 5 A 120 or 3.00 10 B 277 or S150TRILC3M HX-HPF 188 1.35 120 5 9 PC1 2.38 3.68 14 300 1.6 2.8 1.56x2.69 2.7 7.0 HPS150-3A 10 C 347 1.00 4 B 120 or 3.00 10 E 208 or S150MLTLC3O HX-HPF 188 1.65 120 5 10 PC1 2.5 3.85 14 280 1.6 2.8 2.7 2.7 7.0 HPS150-3A 10 D 240 or 1.50 5 E 277 1.30 4 D 480 S15048TLC3M HX-HPF 189 0.72 120 2 8 PC1 3.0 4.5 14 280 1.6 2.83 1.56x2.69 2.7 8.75 HPS150-3A 10 D (1) 200 WATT S66 HIGH PRESSURE SODIUM LAMP 120 2.00 7 277 S200TRIAC4M CWA 240 0.86 184 3 3 PC2 1.45 3.25 28 280 1.65 4.76 1.91x2.91 3.1 8.65 HPS400-3A 10 C 347 0.68 3 120 or 2.10 7 208 or 1.20 4 CWA 240 175 1 PC2 1.2 3.0 28 280 1.65 4.76 1.91X2.91 3.1 8.5 HPS400-3A 10 S200MLTAC4M B 240 or 1.00 4 277 0.88 4 480 S20048TAC4M CWA 240 0.56 172 2 4 PC2 1.2 3.0 28 280 1.65 4.76 1.91x2.91 3.1 8.5 HPS400-3A 10 C (1) 250 WATT S50 HIGH PRESSURE SODIUM LAMP 120 S250120AC4M CWA 295 2.50 185 8 13 PC2 1.8 3.65 35 330 n/a n/a 1.8 3.1 10.3 HPS400-3A 10 A 120 or 2.40 7 B 277 or S250TRIAC4M CWA 295 1.05 185 3 3 PC2 1.8 3.55 35 240 1.65 3.82 1.91x2.91 3.1 10 HPS400-3A 10 B 347 0.85 3 C 120 or 2.50 7 208 or 1.45 4 S250MLTAC4M CWA 295 190 1 PC2 1.8 3.55 35 240 1.65 3.82 1.91x2.91 3.1 10 HPS400-3A 10 B 240 or 1.25 4 277 1.10 3 120 or 2.50 8 C 208 or 1.55 4 C 240 or S250ML5AC4O CWA 300 1.25 188 4 2 PC2 1.95 3.70 35 240 1.65 3.82 1.91x2.91 3.1 11 HPS400-3A 10 B 277 or 1.05 3 B 480 0.65 2 B 480 S25048TAC4M CWA 298 0.65 190 2 4 PC2 1.85 3.65 35 240 1.65 3.82 1.91x2.91 3.1 10 HPS400-3A 5 A See pages 4-31 and 4-32 for Reference Drawings and Wiring Diagrams. Ballast has built-in starter. * Also can be used on a 277 volt line in conjunction with the step-down transformers described on page 5-53. 3 Capacitors are available as an option for high power factor operation. ◆ PAGE 4-28 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID CORE & COIL BALLASTS HIGH PRESSURE SODIUMFEATURING MULTI-5™ • 60 Hz • Minimum Starting Temperature: -40° C • CWA, Normal and High Power Factors Models Available HPS 400-430 WATT Nom Dimensions Capacitor Ignitor Max Open Total Max UL Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 400 WATT S51 HIGH PRESSURE SODIUM LAMP - 4 3/ ” Frame 120 or 3.95 10 277 or S400TRIAC4M CWA 465 1.70 190 5 3 PC2 2.32 4.1 55 240 1.77 3.74 1.91x2.91 3.5 14.0 HPS400-3A 10 D 347 1.35 4 120 or 3.80 10 208 or 2.20 6 S400MLTAC4M CWA 463 190 1 PC2 2.32 4.1 55 240 1.77 3.74 1.91x2.91 3.5 14.0 HPS400-3A 10 D 240 or 1.90 5 277 1.90 5 120 or 3.95 10 208 or 2.30 6 240 or S400ML5AC4M CWA 465 2.00 190 5 2 PC2 2.44 4.3 55 240 1.77 3.74 1.91x2.91 3.5 14.0 HPS400-3A 10 D 277 or 1.70 5 480 1.00 3 480 S40048TAC4M CWA 464 1.00 190 3 4 PC2 2.32 4.1 55 240 1.77 3.74 1.91x2.91 3.5 14.0 HPS400-3A 10 D (1) 400 WATT S51 HIGH PRESSURE SODIUM LAMP - 5 3/ ” Frame 120 or 3.90 10 277 or S400TRIAC5M CWA 467 1.70 200 5 3 PC2 2.2 4.1 48 280 2.05 4.76 1.91x2.91 3.9 16.0 HPS400-3A 10 E 347 1.35 4 120 or 3.95 10 208 or 2.30 6 200 1 PC3 2.25 4.1 48 280 2.05 4.76 1.91x2.91 3.9 16.0 HPS400-3A 10 D S400MLTAC5M CWA 465 240 or 2.00 5 277 1.70 5 120 or 4.00 10 208 or 2.30 6 240 or S400ML5AC5M CWA 468 2.00 200 5 2 PC3 2.5 4.5 48 300 2.05 4.76 1.91x2.91 3.9 17.5 HPS400-3A 10 D 277 or 1.75 5 480 1.00 3 480 S40048TAC5M CWA 467 1.00 200 3 4 PC3 2.25 4.1 48 280 2.05 4.76 1.91x2.91 3.9 16.0 HPS400-3A 10 D (1) 430 WATT SON AGRO HIGH PRESSURE SODIUM LAMP 120 or 4.50 10 208 or 2.50 8 205 1 PC2 2.25 4.25 48 330 2.0 4.7 1.91x2.91 3.9 11.0 HPS400-3A 10 D S430MLTAC4M CWA 490 240 or 2.10 7 277 1.80 5 4 4 3 Capacitors are available as an option for high power factor operation. See pages 4-31 and 4-32 for Reference Drawings and Wiring Diagrams. HID CORE & COIL PAGE 4-29 HPS 600-1000 WATTS HID CORE & COIL BALLASTS HIGH PRESSURE SODIUM • 6 0 Hz • Minimum Starting Temperature: -40° C • C WA models available Nom Dimensions Capacitor Ignitor Max Open Total Max UL Input Catalog* Circuit Watts Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Weight Catalog Distance Bench Volts Number Type Input Current Voltage Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number to lamp (ft) Top Rise (1) 600 WATT S106 HIGH PRESSURE SODIUM LAMP 120 or 5.10 20 208 or 3.10 15 CWA 640 240 1 PC3 3.0 5.0 55 300 1.8 4.7 1.91x2.91 3.9 21.0 HPS600-1B 10 A S600MLTAC5M 240 or 2.70 10 277 2.35 10 (1) 1000 WATT S52 HIGH PRESSURE SODIUM LAMP 120 or 9.50 24 S100024TAC5M CWA 1100 440 14 PC3 3.8 5.7 26 525 n/a n/a 1.91x2.91 4.25 26.0 HPS1000-4B 15 C 240 4.80 12 120 or 9.60 20 277 or S1000TRIAC5M CWA 1100 4.30 440 10 3 PC3 3.8 5.75 26 525 n/a n/a 1.91x2.91 4.25 27.0 HPS1000-4B 15 D 347 3.40 10 120 or 9.50 24 208 or S1000MLTAC5M CWA 1100 5.50 440 15 1 PC3 3.8 5.7 26 525 n/a n/a 1.91x2.91 4.25 26.0 HPS1000-4B 15 C 240 or 4.80 12 277 4.20 10 120 or 9.45 20 208 or 5.45 15 S1000ML5AC5M 240 or CWA 1048 4.75 440 10 2 PC3 3.75 5.65 26 525 n/a n/a 1.91x2.91 4.25 26.0 HPS1000-4B 15 D 277 or 4.10 10 480 2.35 8 480 S1000480AC5M CWA 1100 2.45 440 8 4 PC3 3.8 5.7 26 525 n/a n/a 1.91x2.91 4.25 25.0 HPS1000-4B 15 D 480 S100048TAC5M CWA 1100 2.45 440 8 4 PC3 3.8 5.7 26 525 n/a n/a 1.91x2.91 4.25 25.0 HPS1000-4B 15 D HID CORE & COIL See pages 4-31 and 4-32 for Reference Drawings and Wiring Diagrams. PAGE 4-30 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HPS HID CORE & COIL BALLASTS HIGH PRESSURE SODIUM DESCRIPTION SUFFIX * For Ballast Only For Bracket Only (see pg. 5-7) For Capacitor Only (see pg. 5-5, 5-6) For Distributor Replacement Kit (see pg. 5-13 thru 5-15) For Canadian Distributor Replacement Kit (see pg. 5-16) For Dry-Capacitor & Ballast (see pg. 5-6) For Bracket & Capacitor (see pg. 5-5, 5-7) For Bracket & Dry-Capacitor (see pg. 5-6, 5-7) 000 200 500 Bracket W 500K M L 502K BRef. Dwg. 1, 1a, 5 PC1, 4 PC2, PC3 518 700 L W M S 4.00” 0.75” 3.35” 0.25” 5.25” 1.25” 4.60” 0.25” 7.75” 1.25” 5.75” 0.25” See p. 5-7 for adjustable mounting brackets and detailed bracket drawings. 718 REFERENCE DRAWING 1 2.625" 0.438" A .203" Dia Thru 4 Holes S B A 2.188" B REFERENCE DRAWING 5 0.438" .199" Dia Thru 4 Holes .250" Dia Thru 2 Holes 0.594" 0.594" 0.438" 0.438" A 0.437" B A .250" Dia Thru 2 Holes 1.750" 2.188" 2.437" 1.750" 2.188" 2.188" 2.812" 1.218" 2.625" REFERENCE DRAWING PC1 REFERENCE DRAWING PC2 A B 2.812˝ .250" Dia Thru 2 Holes Cleared 2 Holes for #10 Thru-Bolts 2.438˝ 3.875" 4.250" 1.937" 0.637" .250" Dia Thru B 4 Holes MAX A MAX 3.500˝ 3.938˝ B 4.250˝ 4.375˝ 4.750˝ .250" 8 B .250" Dia Thru 2 Holes 2 Holes Cleared for #10 Thru-Bolts 3.875" 4.250" 4.375" A A .250" Dia Thru 2 Holes Four 0.250" Male Quick Connect Terminals 3.875˝ 4.250˝ 1.937" 4.750" 4.750" 3.875˝ 4.375" 4.375˝ 5.375˝ 5.750˝ 3.875" 4.250" 1.937" 5.375" 5.750" Reference Drawing 7 0.625" .250" Dia Thru 8 Holes 0.687" A .218" Dia Thru 4 Holes B A B 1.062" .250" Dia Thru 2 Holes HID CORE & COIL Reference Drawing 6 Reference Drawing Note: Nominal dimensions provided above 5 for drawings and/or tolerances Contact Universal 0.625" .250" Dia Thru 8 Holes 8 Holes Cleared for #10 Thru-Bolts 0.637" B .250" Dia Thru 8 HolesMAX A A 2 Holes Cleared for #10 Thru-Bolts 3.875" REFERENCE DRAWING PC3 4 Holes Cleared for #10 Thru-Bolts .250" Dia Thru 2 Holes 4.250" 1.937" 4.375" Reference Drawing 3 Reference Drawing 2 4 Holes Cleared for #10 Thru-Bolts 0.625" B Four 0.250" Male Quick Connect Blade Terminals 2.437" 1.218" 2.812" .199" Dia Thru 4 Holes Reference Drawing 1-A .250" Dia Thru 4 Holes 3.500" 3.938" .203" Dia Thru 4 Holes Reference Drawing 1 B 0.812" 3.937" 3.500" A B Ref .250 4 .250" Dia Thru 2 Holes .250" Dia Thru 2 Holes 3.437" 3.875" 2.750" 3.875" 4.250" 1.937" 4.375" 5.375" 3.437" 4.250" 3.437" 4.125" 3.875" 1.937" 4.375" 4.250" 1.937" 5.375" 5.750" 5.750" Reference Drawing 13 Reference Drawing 14 PAGE 4-31 Refe Reference Drawing 15 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID CORE & COIL BALLASTS HPS HIGH PRESSURE SODIUM WIRING DIAGRAMS Wiring Diagram 7 Wiring Diagram 11 Wiring Diagram 2 Wiring Diagram 8 Wiring Diagram 12 Wiring Diagram 3 Wiring Diagram 9 Wiring Diagram 13 Wiring Diagram 4 Wiring Diagram 10 Wiring Diagram 14 HID CORE & COIL Wiring Diagram 1 PAGE 4-32 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID CORE & COIL BALLASTS 50 HERTZ • 50 Hz • Minimum Starting Temperature: -40° C • CWA, Normal and High Power factor models available MH & HPS 50 HZ Nom Dimensions Capacitor Ignitor UL Max Open Total Max Bench Input Catalog* Circuit Input Input Circuit Fuse Wir Ref Min Dry Film Oil Filled Wt. Catalog Dist. Top Volts Number Type Watts Curr. Volt. Rating Dia Dwg A B µF Volt Dia Ht Oval Ht (lbs.) Number lamp Rise (1) 175 WATT M57 METAL HALIDE LAMP 230 M175230AC3M CWA 205 1.00 310 3 15 PC1 2.25 3.55 12 400 6.5 3.82 1.5 3.13 6.7 n/a n/a C (1) 250 WATT M58 METAL HALIDE LAMP 230 M250230AC3M CWA 282 1.40 285 4 15 PC1 3.0 4.3 18 400 n/a n/a 2.01x3.01 3.1 9 n/a n/a D (1) 400 WATT M59 METAL HALIDE LAMP 230 M400230AC4M CWA 448 2.20 300 6 15 PC2 2.13 3.75 28 425 n/a n/a 1.91x2.91 3.9 13 n/a n/a D (1) 1000 WATT M47 METAL HALIDE LAMP 230 M1000230AC5M CWA 1080 4.70 420 13 18 PC3 3.4 5.3 30 440 n/a n/a 2.01x3.01 3.9 21 n/a n/a C 220 8.50 22 A 18 PC3 3.45 4.90 30 440 n/a n/a 1.91x2.91 3.87 24 n/a n/a M1000230DAC5M CWA 1080 405 B 230 4.80 13 (1) 1500 WATT M48 METAL HALIDE LAMP 220 7.20 20 230 M1500230AC5M CWA 1605 7.29 430 20 18 PC3 4.38 6.18 42(2x21) 480 n/a n/a 1.97x3.66 3.9 30 n/a n/a C 240 6.80 20 (1) 70 WATT S62 HIGH PRESSURE SODIUM LAMP 220 0.95 2 230 S70230LC3M HX-HPF 88 1.10 120 2 18 PC1 1.9 3.2 10 280 1.26 2.83 n/a n/a 5.7 HPS150-3A 3 A 240 1.05 2 (1) 250 WATT S50 HIGH PRESSURE SODIUM LAMP 220 1.33 5 230 S250230AC4M CWA 280 1.24 188 5 18 PC2 1.78 3.58 40 300 n/a n/a 2.01x3.01 3.9 10.3 HPS400-3A 3 B 240 1.15 5 (1) 400 WATT S51 HIGH PRESSURE SODIUM LAMP (continued) 220 2.00 8 230 S400230AC4M CWA 465 2.05 190 8 18 PC2 2.5 4.3 64 300 n/a n/a 1.91x2.91 3.1 15.5 HPS400-3A 3 D 240 2.10 8 (1) 1000 WATT S52 HIGH PRESSURE SODIUM LAMP 220 5.10 15 230 S1000230AC5M CWA 1100 4.90 445 15 15 PC3 4.0 5.8 36 525 n/a n/a 1.96x3.65 4.25 27 HPS1000-4B 10 D 240 4.80 15 See page 4-34 for Reference Drawings and Wiring Diagrams. HID CORE & COIL PAGE 4-33 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) 50 HZ HID CORE & COIL BALLASTS 50 HERTZ DESCRIPTION REFERENCE DRAWING PC1 SUFFIX * For Ballast Only For Capacitor Only (see pg. 5-5, 5-6) 000 500 0.250 Dia Thru 2 Holes 3.500˝ 3.938˝ 4.250˝ 3.875˝ 4.375˝ 5.375˝ 5.750˝ S M L BRef. Dwg. 1 2, 3, 4 PC1 PC2 PC3 A B MAX 2.812˝ 2.438˝ Bracket 0.250 Dia Thru 8 Holes 0.199 Dia Thru 4 Holes A B MAX 0.250 Dia Thru 2 Holes W REFERENCE DRAWING PC3 REFERENCE DRAWING PC2 L W M S 4.00” 0.75” 3.60” 0.25” 5.25” 1.75” 4.60” 0.25” 5.25” 1.25” 4.60” 0.25” 7.75” 1.25” 5.75” 0.25” 7.75” 2.75” 6.10” 0.25” 4 Holes Cleared for #10 Thru-Bolts A B MAX 4.250˝ 2 Holes Cleared for #10 Thru-Bolts See p. 5-8 for adjustable mounting brackets and detailed bracket drawings. 3.875˝ 4.375˝ 4.750˝ S70230LC3M 70W High Pressure Sodium Specification Sheet Input Volts WIRING DIAGRAMS 220 230 Regulation Line Volts Lamp Watts Wiring Diagram ±10% 15 Power Factor (min) Input Watts NOM. Open Circuit Voltage Line Current (Amps) Operating Open Circuit Starting HID CORE & COIL 50 HERTZ olts Lamp Dropout Voltage (Line) on UL Temperature Ratings Volts Insulation Class p Watts Temperature Code MIN. Starting Temperature Wiring ctor (min) ts CAPACITOR Specifications Microfarads en CircuitVolts Voltage (min.) 220 240 ±5% ±5% ±5% ±5% ±10% ±10% ±10% 90% 88 W 90% 88 W 90% 88 W 90% 88 W 90% 88 W 120 V 120 V 120 V 120 V 120 V 0.60 0.95 0.50 1.10 0.40 1.05 0.37 0.35 0.34 2 2 2 Specification Sheet Recommended Fuse (Amps) 50Hz HX-HPF ±10% ±5% 135 V 230 135 V 240135 V 0 0 V V ±10%H (180°C)±10% ±10% H (180°C) H (180°C) H (180°C) ±10% ±10% ±10% ±10% A - ±10% -40°F -40°C -40°F -40°C -40°F Diagram 17-40°C 90% 90% 90% 1605 W 430 V ent (Amps) 50Hz Test Procedures 7.20 ating Secondary Open Ckt Voltage (V) n Circuit Secondary Current Shorted (A)2.70 6.50 ing Input Operating Current (A) Input Open Circuit Current (A) 20 ended Fuse (Amps) 1605 W 10 uf 10 uf 280 V 280 V 430 V 1605 W 10 uf 430 V 280 V 7.29 108 - 132 6.80 108 - 132 108 - 132 2.551.15 - 2.15 2.30 1.15 - 2.15 1.15 - 2.15 6.200.46 - 0.56 6.00 0.55 - 0.67 90% 10 uf 430 V 280 V 0.48 - 1.3620 0.50 - 1.43 20 0.53 - 1.50 0.20 - 0.28 0.21 - 0.30 0.23 - 0.42 90% COM (YEL) - - 0 - 0- 7.65 - 9.35 12-14 7.65 - 9.35 9.35 12-14 7.65 -12-14 12-147.65 - 9.35 Cu / Cu - 7.6512-14 - 9.35 Cu / Cu - 1 2 COM (YEL) Note: Nominal dimensions provided above Contact Universal for drawings and/or tolerances A 230 V (BLK) 10 uf 108 - 132 3 STARTER Wiring Diagram 18 280 V 1.15 - 2.15 LAMP (RED/BLK) 3 Wiring Diagram 430 V 108 - 132 CAP (YEL) Metal Halide 50Hz CWA 1605 W Input Short Circuit Current (A) V 150 V 150 V V 150 V 60Hz Test Procedures 108 - 132 108 - 132 108 - 132 108 - 132 108 - 132 Secondary Open Ckt Voltage (V) erature Ratings 1.40 - 2.10 1.40 - 2.10 1.40 - 2.10 1.40 - 2.10 1.40 - 2.10 Secondary Current Shorted (A) H (180°C) H (180°C) H (180°C) H (180°C) H (180°C) ation Class 0.04 - 0.13 0.05 - 0.14 0.05 - 0.15 None C perature Input CodeOpen Circuit Current (A)None 0.16 - 0.31 0.16 - 0.31 0.16 - 0.31 Input Short Circuit Current (A) -22°F -30°C -22°F -30°C -22°F -30°C -22°F -30°C -22°F -30°C ting Temperature High Potential OR Specifications 2000 V 2000 V 2000 V 2000 V 2000 V Test 1 Minute 2500 2500uf V V uf V uf V 42.0 uf2500 V 42.0 2500 42.0 42.0 uf 2500 42.0 ofarads Test 1 Second 480 V 480 V 480 V 480 V 480 V (min.) Core and Coil Specifications 1.90 in 1.90 in 1.90 in 1.90 in 1.90 in Dimension A t Procedures 3.20 in 3.20 in 3.20 in 3.20 in 3.20 in Dimension B 400 - 4.555.70400 400 - 4.55 - 4.55 - 4.55 ndary Open Ckt Voltage (V) lbs 400 5.70 lbs 400 5.70 5.70 lbs 5.70 lbs lbs - 4.55 Weight / Cu Cu / Cu Cu / Cu Coil Material (Pri. / Sec.) 6.55 - 7.99Cu 6.37 - 7.77 6.19 - 7.55 Operating Current (A) M48 CAP (RED) 230V (BLK) ±10% 1.15 - 2.15 0.36 - 0.44 1500W H±10% (180°C) -40°F -40°C -40°F -40°C 1605 W M1500230AC5M Wiring Diagram 16 B MAX 0.234 Dia Thru 4 Holes CAP ( RED) LAMP (RED/BLK) 2.812" 0.250 Dia Thru 2 Holes 2.438" COM ( YEL) pout Voltage (Line) ndary Current Shorted (A) Lead Lengths (inches) S62 COM ( YEL) 3.500" 3.938" Wiring Diagram Reference Drawing Capacitor: R17058517 Height: B 100 °C MAX 2.83 in Width / Diameter: 1.26 in 4-34 PAGE Max Case Temp: 0.250 Dia Thru 2 Holes 0.250 Dia Thru 8 Holes A Ignitor: HPS150-3A Max Case Temp 105 °C BTL: 3 ft 4.250" No. 1 (Red or Blue) No. 2 (Yellow) No. 3 (Brown) F-CAN BALLASTS METAL HALIDE MH 35-400 • 60 Hz •M inimum Starting Temperature: -30° C •C WA and High Power Factor Designs WATT This ballast may also be used with (1) 70 watt S88 High Pressure Sodium lamp. 7 M98 Designates Venture Lighting catalog numbers MH70/4/MED, C/4/MED or MS70/C/84/MED/W 22 See page 4-40 for Reference Drawings and Wiring Diagrams. This ballast can be used with a MH200 ignitor to operate (1) 250 watt M103 lamp. Consult Universal for instructions. 8c 23 Two of these ballasts are required to operate the lamp. Electrical data is for two ballasts, except for “Sound Rating,” which is for each ballast * Refer to Page 5-5. PAGE 4-35 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID CORE & COIL 50 HERTZ Nom Dimensions Max Max Open Dist Certifications Input Catalog Circuit Input Input Circuit Fuse Wir Overall Case Mtg Total To Sound Volts Number Type Watts Current Voltage Rating Dia Length Length Dim Weight Lamp (ft) Rating UL CSA (1) 35/39 WATT M130 METAL HALIDE (with built-in ignitor) 120 1120-251A-TC CWA 55 0.50 225 2 21 9.50 8.35 8.85 3.0 20 B Yes Yes (1) 50 WATT M110 METAL HALIDE (with built-in ignitor) 120 0.64 3 or 11210-236C-TC HX-HPF 70 240 20 11.75 10.56 11.14 11.0 20 B Yes Yes 277 0.28 2 (1) 70 WATT M85 METAL HALIDE (with built-in ignitor) 120 2.00 6 or 11210-277C-TC7 HX-HPF 98 250 20 11.75 10.56 11.14 11.0 20 B Yes Yes 277 0.90 3 (1) 70 WATT M98 METAL HALIDE (with built-in ignitor) 120 2.00 6 or 11210-506C-TC22 HX-HPF 90 250 20 11.75 10.56 11.14 11.0 20 B Yes Yes 277 0.90 3 120 2.00 6 or 11210-554C-TC HX-HPF 90 250 20 11.75 10.56 11.14 11.0 20 B No Yes 347 0.80 3 (1) 100 WATT M90 METAL HALIDE (with built-in ignitor) 120 2.20 8 or 11210-239C-TC HX-HPF 125 250 20 11.75 10.56 11.14 11.0 20 B Yes Yes 277 1.00 4 120 2.20 8 or 11210-606C-TC HX-HPF 125 250 20 11.75 10.56 11.14 11.0 20 B No Yes 347 0.70 2 (1) 150 WATT M81 METAL HALIDE (with built-in ignitor) 120 3.70 10 or 11210-242C-TC HX-HPF 185 260 20 14.31 13.19 13.75 14.0 20 B Yes Yes 277 1.60 5 (1) 150 WATT M102 METAL HALIDE (with built-in ignitor) 120 3.70 10 or 11210-539C-TC HX-HPF 185 260 20 14.31 13.19 13.75 14.0 20 B Yes Yes 277 1.60 4 (1) 175 WATT M57 METAL HALIDE LAMP 120 2.00 5 or 20 14.32 13.19 13.75 14.0 * B Yes Yes 300 1110-245SC-TC CWA 202 0.85 3 277 120 1.75 5 or 20 11.75 10.55 11.10 14.0 * B Yes Yes 300 1110-564C-TC CWA 205 0.62 2 347 (1) 250 WATT M58 METAL HALIDE LAMP 120 2.50 8 or 20 16.75 15.57 16.13 18.0 * C Yes Yes 280 1110-246C-TC 8c CWA 295 1.10 4 277 120 2.50 8 or 300 22 11.75 10.55 11.10 11.0 * B Yes Yes 1111-246C-TC 23 CWA 300 1.10 4 277 120 2.50 8 or 20 16.65 15.55 16.10 17.5 * C Yes Yes 285 1110-566C-TC CWA 295 0.95 3 347 (1) 400 WATT M59 METAL HALIDE LAMP 120 4.00 10 or 20 19.25 18.06 18.63 22.0 * C Yes Yes 300 1110-247SC-TC CWA 463 1.75 5 277 120 4.00 10 or 1111-247SC-TC 23 CWA 460 300 22 14.31 13.19 13.75 14.0 * B Yes Yes 277 1.75 5 120 4.30 10 or 20 19.25 18.05 18.60 22.0 * C Yes Yes 300 1110-568C-TC CWA 460 1.50 4 347 HPS 35-250 WATT F-CAN BALLASTS HIGH PRESSUE SODIUM • 60 Hz • Minimum Starting Temperature: -40° C • CWA and High Power Factor Designs Nom Dimensions Max Max Open Dist Certifications Input Catalog Circuit Input Input Circuit Fuse Wir Overall Case Mtg Total To Sound Volts Number Type Watts Current Voltage Rating Dia Length Length Dim Weight Lamp (ft) Rating UL CSA (1) 35 WATT S76 HIGH PRESSURE SODIUM (with built-in starter) 120 0.80 5 or 12210-261C-TC HX-HPF 55 20 11.75 10.55 11.10 9.0 10 B Yes Yes 120 0.35 2 277 (1) 50 WATT S68 HIGH PRESSURE SODIUM (with built-in starter) 120 1.05 3 or 12210-236C-TC HX-HPF 71 20 11.75 10.55 11.10 9.0 10 B Yes Yes 125 0.45 2 277 (1) 70 WATT S62 HIGH PRESSURE SODIUM (with built-in starter) 120 1.60 5 or 12210-237C-TC HX-HPF 97 20 11.75 10.56 11.14 9.15 10 B Yes Yes 140 0.70 2 277 120 1.69 5 or 12210-552C-TC HX-HPF 109 20 11.75 10.55 11.10 9.2 10 B Yes Yes 145 0.63 2 347 (1) 100 WATT S54 HIGH PRESSURE SODIUM (with built-in starter) 120 2.00 5 or 12210-239C-TC HX-HPF 125 20 11.75 10.55 11.10 10.4 10 B Yes Yes 130 0.90 3 277 120 2.10 6 or 12210-606C-TC HX-HPF 126 20 11.75 10.55 11.10 10.4 10 B Yes Yes 165 0.90 3 347 (1) 150 WATT S55 HIGH PRESSURE SODIUM (with built-in starter) 120 2.80 8 or 12210-241C-TC HX-HPF 185 20 14.30 13.15 13.75 14.0 10 B Yes Yes 120 1.20 4 277 120 2.80 8 or 12210-602C-TC HX-HPF 185 20 14.30 13.15 13.75 14.1 10 B Yes Yes 120 1.03 3 347 HID F-CAN See page 4-40 for Reference Drawings and Wiring Diagrams. PAGE 4-36 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) 34 35 White Line Insulate Unused Input Lead for 300 Volts. B A L L A S T 277V or 347V Black BALLAST or 120V Black/Yellow Red Black White Wiring Diagram B 34 A L L A S T F-CAN 0.250" Dia. 1.000" 2.000" Red Red White 4.000" 4.500" 277V White or Yellow Wiring Diagram 34 B A L L A S T Wiring Diagram 35 Wiring Diagram 36 277V Black or 120V Black/Yellow Separately Insulate Unused Input Lead for 300 Volts HID CORE & COIL BALLASTS Line Insulate Unused Input Lead for 300 Volts. White White or Yellow Black Red F-CAN Wiring Diagram 36 Black or Yellow 0.406" or 120V Black/Yellow 0.562" 0.250" Dia. Separately Insulate Unused Input 1.000" 2.000" Lead for 300 Volts Wiring Diagram 35 Wiring Diagram Mounting Bracket Assemblies 4.500" 0.406" 4.000" 36 F-CAN BALLASTS OPTIONAL ACCESSORIES Mounting Bracket Assemblies 0.562" Splice Box Mounting Bracket Assemblies Tee-Pee Lead Wire Covers 1.437" 1.500" 2.000" 2.562" 0.250" Dia. 1.750" 0.218" Dia. 1.000" 2.000" 2.531" 1.437" 0.406" 4.000" 4.500" Tee-Pee Lead Wire Covers 1.500" 2.000" 2.562" 0.562" Embossed Dimples 2 Places 2.000" 3.000" 1.750" 2.812" 0.850" Dia. Knockouts 5 Places 0.218" Dia. Catalog Number 2-BMB-1. Mounting Bracket Assemblies Catalog NumberTee-Pee TP5. Ref.part Lead#001-2013. Wire Covers Available for the remote installation of ballasts. Each assembly consists of two (2) mounting brackets, four (4) screws, four (4) washers and four (4) nuts. For use where ballast is attached to the surface of an enclosure or raceway. Embossed Dimples 2 Places 1.437" 1.500" 2.000" 2.562" 2.531" 0.297" Dia. Mounting Holes 2 Places Catalog Number SB-4. Splice Ref. part Box #001-2009 2.000" 3.000" 2.812" 0.850" Dia. Knockouts 5 Places For use with all F-Can Ballasts. It is easily installed on 0.297"F-Can Dia. ballast. It the anchor bracket provided on each Mounting Holes contains five (5) 7/8” diameter knockouts. 2 Places Splice Box 1.750" 0.218" Dia. 2.531" REFERENCE Tee-Pee DRAWING Lead Wire Covers FOR F-CAN se Ca 2.000" 3.000" 2.812" 0.850" Dia. Knockouts 5 Places 0.297" Dia. Mounting Holes 2 Places th ng Le Embossed Dimples 2 Places Height Width Splice Box th ng ng ti Le un l Mo al r e Ov Hole Mounting Width WIRING DIAGRAMS B A Wiring Diagram 20 L L A S T Black L L A S T Red White White or Yellow Wiring Diagram 35 Red Red 120V Black 277V Black Wiring Diagram 22 Black or Yellow HID F-CAN Line am B A L L A S T White LLAST B A Wiring Diagram 21 Red or 120V Black/Yellow Separately Insulate Unused Input Neutral to Lamp Shell Lead for 300 Volts Wiring Diagram 36 Note: Nominal dimensions provided above Contact Universal for drawings and/or tolerances ia. 1.000" 2.000" 00" 0.406" 0.562" PAGE 4-37 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) IGNITORS STANDARD IGNITORS • INSTANT RESTRIKE IGNITORS • LONG DISTANCE IGNITORS • AUTOMATIC SHUTOFF IGNITORS • SHUTOFF DEVICES Catalog Number Description Reference Drawing Number --STANDARD IGNITORS (See pg. 5-43) PULSE START METAL HALIDE MH 70-3B 13 MH 100-3A MH 150-1A MH 200-1B 13 MH 350-1A P 750-1B13 HPS 1000-4B13 HIGH PRESSURE SODIUM HPS 150-3A HPS 400-3A HPS 450-1B 13 HPS 460-1B 13 HPS 600-1B HPS 1000-4B 13 HPS 1000-6B 13 For double-ended MH lamps with HX-HPF ballasts: 70 watt (M85), 100 watt (M91), and 150 watt (M81) 29 For MH lamps with HX-HPF ballasts: 35/39w(M130), 50w(M110), 70w(M98), 100w(M90/M140), and 150w(M102/M142) 25 For 150 watt (M102/M142) lamp with CWA ballast 26 For double-ended MH 250 watt (M80) lamp 27a For MH lamps with CWA ballasts: 175 watt (M152/M137), 200 watt (M136), 250 watt (M153/M138), 320 watt (M154/M132), 350 watt (M131), 400 watt (M155/M135), and 450 watt (M144) 26 For 750 watt (M149) MH lamp 29 For MH lamps: 875 watt (M166) and 1000 watt (M141). It is also used for 1000W HPS lamps 29 For HPS lamps of 150 watt or less with HX-HPF ballast, except 150 watt S56 lamp 26 For HPS lamps from 200 to 400 watts and 150 watt S56 lamp with CWA ballasts 26 For 150 watt S56, 200, 250 or 400 watt lamps with 240 volt/60 Hz reactor ballasts. With attached mounting bracket. 27 For 200, 250 and 400 watt lamps with HX-HPF ballasts and 50 Hz reactor ballasts. With attached mounting bracket. 27 For 600 watt lamps. 27 For 1000 watt HPS and Pulse Start Metal Halide lamps. With attached mounting bracket. 29 Obsolete 29 PLUG REPLACEABLE IGNITORS PULSE START METAL HALIDE MH 150-G15 HIGH PRESSURE SODIUM HPS 150-G01 HPS 400-G05 For MH lamps with HX-HPF ballasts: 35/39 watt (M130), 50 watt (M110), 70 watt (M98), 100 watt (M90/M140), and 150 watt (M102/M142) 32 For HPS lamps of 150 watt or less with HX-HPF ballast, except 150 watt S56 lamp For HPS lamps from 200 to 400 watts and 150 watt S56 lamp with CWA ballasts 32 32 INSTANT RESTRIKE IGNITORS HIGH PRESSURE SODIUM HPS 150-5B 13 Instant Restrike Ignitor — for lamps of 150 watts or less except 150 watt S56. Ignitor has attached mounting bracket. 30 LONG DISTANCE IGNITORS PULSE START METAL HALIDE MH 100-5A MH 100-5A MH UNV-5B HIGH PRESSURE SODIUM HPS 150-4A HPS 400-4A For MH lamps from 35 to 50 watts. Max Ballast to Lamp Distance ( ~ 20’) 25 For MH lamps from 70 to 150 watts. Max Ballast to Lamp Distance ( ~ 30’) 25 For MH lamps from 35 to 450 watts. Ignitor incorporates automatic resetting thermal protection. Max Ballast to Lamp Distance ( ~ 50’) 33 For HPS lamps of 150 watt or less, excerpt 150 watt S56 lamp. Max Ballast to Lamp Distance ( ~ 20’) 24 For HPS lamps from 200 to 400 watts and 150 watt S56 lamp. Max Ballast to Lamp Distance ( ~ 25’) 33 AUTOMATIC SHUTOFF IGNITORS PULSE START METAL HALIDE HID F-CAN MH 100-35B 13 MH 150-35B 13 MH 350-15B 13 P 750-15B 13 HIGH PRESSURE SODIUM HPS 150-45B 13 HPS 400-45B 13 For MH lamps: 35/39 watt (M130), 50 watt (M110), 70 watt (M98), 100 watt (M90/M140), and 150 watt (M102/M142). With attached mounting bracket For 150 watt M81 lamp with CWA ballasts. With attached mounting bracket. For MH lamps: 175 watt (M152/M137), 200 watt (M136), 250 watt (M153/M138), 320 watt (M154/M132), 350 watt (M131), 400 watt (M155/M135), and 450 watt (M144) For 750 watt (M149) MH lamp 27 31 31 31 For lamps of 150 watts or less except 150 watt S56. With attached mounting bracket. 27 For lamps from 200 to 400 watts and 150 watt S56 with constant wattage autotransformer ballasts. 27 With attached mounting bracket. AUTOMATIC SHUTOFF DEVICES In addition to one-piece shutoff ignitors, automatic shutoff devices are available as separate components for use with the ignitors below. SA-100 13 HPS 150-3A, HPS 150-5B, HPS400-4A, HPS460-1B, MH100-5A, MH70-3B, MH100-3A, MH150-1A MH350-1A, HPS150-4A, HPS400-3A, HPS600-1B, MHUNV-5B, MH200-1B 33a May also be available without attached mounting bracket. Substitute “A” suffix for “B” suffix when ordering. Minimum quantities may apply. PAGE 4-38 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) IGNITORS Lamp ANSI Circuit Watts Code Type Standard Ignitors Auto Shutoff Instant Restrike Long Distance Ignitors Lamp ANSI Circuit Standard Watts Code Type Ignitors HPS 150-45B HPS 150-45B HPS 150-45B HPS 150-45B HPS 150-45B HPS 400-45B HPS 400-45B HPS 400-45B HPS 400-45B HPS 400-45B HPS 400-45B HPS 400-45B — — HPS 150-5B HPS 150-5B HPS 150-5B HPS 150-5B HPS 150-5B — — — — — — — — — HPS 150-4A HPS 150-4A HPS 150-4A HPS 150-4A HPS 150-4A HPS 400-4A HPS 400-4A HPS 400-4A HPS 400-4A HPS 400-4A HPS 400-4A HPS 400-4A — — 35 50 70 70 100 100 100 150 150 150 350 S76 S68 S62 S54 S55 S56 S50 S50 S50 S51 S51 S51 S106 S52 Reactor Reactor, HX Reactor, HX Reactor, HX Reactor, HX CWA Reactor CWA HX Reactor CWA HX CWA CWA Long Distance Ignitors — — MH 70-35B MH 100-35B MH 100-35B MH 100-35B — — MH 150-35B MH 100-35B MH 100-5A MH 100-5A MH 100-5A MH 100-5A MH 100-5A MH 100-5A — — — MH 100-5A METAL HALIDE IGNITORS HIGH PRESSURE SODIUM IGNITORS 35 50 70 100 150 150 250 250 250 400 400 400 600 1000 Auto Shutoff HPS 150-3A HPS 150-3A HPS 150-3A HPS 150-3A HPS 150-3A HPS 400-3A HPS 450-1B HPS 400-3A HPS 460-1B HPS 450-1B HPS 400-3A HPS 460-1B HPS 600-1B HPS 1000-4B 350 M130 M110 M85 M98 M90 M90 M91 M81 M81 M102 M131 M131 Reactor HX HX HX Reactor CWA HX HX CWA HX Reactor HX MH 100-3A MH 100-3A MH 70-3B MH 100-3A MH 100-3A MH 100-3A MH 70-3B MH 70-3B MH 150-35B MH 100-3A MH 70-3B MH 70-3B — — — — STANDARD IGNITORS LONG DISTANCE IGNITORS Standard Ignitors are supplied with all Universal High Pressure Sodium and Metal Halide ballasts requiring ignitors. These ballasts are supplied with an appropriate external ignitor unless the ignitor is permanently attached to or built into the ballast. Long Distance Ignitors are used in situations where a ignitor must be mounted further from the lamp than is recommended for a standard ignitor. The maximum lamp to ignitor distance for these ignitors is 50 feet, which may vary depending on the type of lamp, ballast, fixture, and wiring. INSTANT RESTRIKE IGNITORS AUTOMATIC SHUTOFF IGNITORS An Instant Restrike Ignitor generates multiple pulses to restrike a lamp arc after a brief power interruption has extinguished it, without the typical 3-minute cool-down time. A Standard Ignitor cannot restrike an arc until the lamp has had time to sufficiently cool. Even though an Instant Restrike Ignitor can reinitiate the lamp arc immediately upon restoration of power, the lamp is still subject to warmup. The following chart is based on an S55 lamp. In the event of a lamp failure, a Standard Ignitor will continue to pulse, trying to start the lamp. This may reduce the life of the ignitor. An Automatic Shutoff Ignitor will apply pulses for 10 to 12 minutes and then deactivate if a lamp arc cannot be initiated. Resetting the ignitor is accomplished by momentarily interrupting the power to the ballast. For this reason, these ignitors are not recommended for use on unswitched circuits. Restrike Time 1 second 5 seconds 15 seconds 30 seconds 1 minute Cold Start 2 seconds Instant Instant Instant Instant Instant Light Output On Reignition 87% 83% 76% 62% 46% 36% AUTOMATIC SHUTOFF DEVICES Lamp Warmup Time Automatic shutoff devices can be used with a standard ignitor to convert standard ignitor into an automatic shutoff ignitor. Simply use the automatic shutoff device with appropriate standard ingnitor. Matching ignitors are listed in the table on previous page. Automatic shutoff device coupled with standard ignitor is equivalent to automatic shutoff ignitor. Wiring diagrams of SA-100 automatic shutoff device are shown on Ref. Drawings 34a and 34b. 35 seconds 70 seconds 130 seconds 190 seconds 255 seconds 360 seconds PLUG REPACEABLE IGNITORS Incorporates terminals and a separate mounting base to simplify construction and replacement. TEMPERATURE RATING Most ignitors are rated for a 105°C maximum case temperature. Consult ballast specification sheets at www.unvlt.com for specific details. PAGE 4-39 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID IGNITORS Time Lamp Is Extinguished REFERENCE DRAWINGS IGNITORS All dimensions in decimals. All lead lengths: 13 inches ±1 No. 1 (Red or Blue) No. 1 (Red or Blue) 120V (Black/Yellow) No. 1 (Red or Blue) No. 2 (Yellow) No. 2 (Yellow) No. 2 (Yellow) No. 2 (Yellow) No. 3 (Brown) No. 3 (Brown) COM (Yellow) No. 3 (Brown) 1.25" 2.00" 1.25" 2.50" 2.50" Ref. Drawing 25 Ref. Drawing 24 1.25" 1.25" 2.25" Ref. Drawing 25a Ref. Drawing 26 120V (Black/Yellow) No. 1 (Red or Blue) Com. (Yellow) No. 2 (Yellow) Ballast (Blue/White) No. 3 (Brown) Lamp (Blue) Mounting Bracket Mounting Bracket 1.31" 1.31" No. 1 (Red or Blue) No. 1 (Red or Blue) No. 2 (Yellow) No. 2 (Yellow) No. 3 (Brown) No. 3 (Brown) Mounting Bracket Mounting Bracket 1.31" 1.31" 1.25" 1.25" 0.22" 3.50" 4.31" 4.75" 0.22" Com. (Yellow) Com. (Yellow) Ballast (Blue/White) Ballast (Blue/White) Lamp (Blue) Lamp (Blue) Mounting Bracket Mounting Bracket 1.56" 1.62" 0.88" 0.88" 3.50" 4.31" 4.75" 0.22" Ref. Drawing 28 Ref. Drawing 27a Ref. Drawing 27 2.05" 2.05" 0.88" 0.88" 3.50" 4.31" 4.75" 1.25" 1.25" 2.05" 2.05" 3.10" 4.31" 4.75" 0.22" Ref. Drawing 29 1.56" 1.50" 2.60" 2.65" 0.88" 0.88" 3.50" 4.31" 4.75" 0.22" Ref. Drawing 31 Ref. Drawing 32 HID IGNITORS Ref. Drawing 30 0.22" 3.75" 4.31" 4.75" Note: Nominal dimensions provided above Contact Universal for drawings and/or tolerances PAGE 4-40 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Notes HID PAGE 4-41 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) eHID Less energy. Enhanced performances. Experience significant energy savings and increased lumen output vs. halogen lamps with Electronic High Intensity Discharge (HID) ballasts from Universal Lighting Technologies. Vossloh-Schwabe (VS), also a Panasonic Lighting Company, recently merged its US operation into Universal. This merger combines Vossloh’s market leading high quality electronic HID product line with Universal’s extensive offering. There are numerous advantages of using VS electronic HID ballasts. Operating HID lamps used in HID lighting systems with electronic ballasts greatly increases system efficiency in comparison with magnetic ballasts. These ballasts are designed to provide optimal lamp performance and maximum energy savings. With enhanced capabilities to downsize the form factor of luminaire housings and reduce wiring costs, VS electronic HID ballasts lead the way to electronic solutions for HID lighting. Microprocessor controlled intelligence offers superior lamp performance and the flexibility for proprietary value-added functions. VS electronic HID ballasts cover your HID needs with products for Metal Halide Lamps ranging from 20 Watts to 150 Watts. VS electronic HID ballasts continuously monitors lamp characteristics during operation and adjusts the lamp current to optimize performance. This guarantees controlled operation in all modes of operation. The lamp color temperature is also stabilized by using VS electronic HID ballasts due to its relatively constant output power characteristics in addition to producing flicker free lighting that usually occurs at the end of the discharge lamp’s service life. The technology enhancements of VS electronic HID ballasts, allowing very small form factors and light weight designs, has enabled new, innovative luminaire designs. ELECTRONIC HID Universal Lighting Technologies is a member of the Panasonic Group Product Overview Micro Series: The introduction of the smallest eHID ballasts in the market was coordinated with the launch of the new miniaturized capsule MH lamps enabling the ultimate luminaire design flexibility. Extremely compact and aesthetically pleasing, luminaire designs are approaching the form factor and size of low voltage halogen systems. Mini Ballast Series: Two ideal form factors that are used in millions of HID track light luminaires characterize the mini series of eHID ballasts. The mini-slim and mini-square units revolutionized track lighting by allowing significantly smaller and greater variety of luminaire designs while providing energy savings of 60-70% versus halogen systems. ELECTRONIC HID Standard Case “Valued-added Series”: Millions of recessed, track-head and specialty luminaires have used the de facto industry standard enclosure since introduction. The significant energy savings and enhanced reliability of our ballasts promoted the rapid escalation of electronically ballasted MH luminaires for almost 15 years. Technological advancements have now allowed the integration of multiple, value-added functions such as: a powersource for the self-heating thermal protectors, an electronic 277V step-down transformer, and an intelligent auxiliary lighting control for back-up lighting during lamp hot restrike modes. Ideal for new, retrofit and replacement applications in recessed luminaires. Features and Benefits: • Optimum lamp performance • Rugged, compact and lightweight design • High power factor • Enhanced color and CRI uniformity • Shut-down protection • Reduced wiring costs • Eliminates nuisance lamp cycling at end-of-lamp life (intelligent lamp sensing capabilities) • Constant lamp power • Reduced lamp dropouts due to improved line voltage dip withstand • Quiet operation • Durable performance for various applications • Fewer SKUs required in inventory • Broadens design flexibility for new applications and luminaries PAGE 5-2 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) eHID Product Family Part # Description Lamp Wattage Lamp Type Input Voltage Input Power Mounting Lead Exit Dimensions Wiring Micro Series 188514 M2012CK-7EUN 20 M/C156 120 24.5 No Feet Side 1 1 188882 M2012CK-7EUN-F 20 M/C156 120 24.5 Feet Side 2 1 188883 M2012CK-7EUN-J 20 M/C156 120 24.5 Studs Top 3 1 188574 M2212CK-7EUN 22 M/C175 120 26.5 No Feet Side 1 1 188884 M2212CK-7EUN-F 22 M/C175 120 26.5 Feet Side 2 1 188885 M2212CK-7EUN-J 22 M/C175 120 26.5 Studs Top 3 1 188635 M3912CK-7EUN 39 M/C130 120 45 No Feet Side 4 1 188776 M3912CK-7EUN-F 39 M/C130 120 45 Feet Side 2 1 188756 M3912CK-7EUN-J 39 M/C130 120 45 Studs Top 3 1 188757 MTm3912CK-7EUN 39Tm M/C179 120 45 No Feet Side 4 1 188777 MTm3912CK-7EUN-F 39Tm M/C179 120 45 Feet Side 2 1 188758 MTm3912CK-7EUN-J 39Tm M/C179 120 45 Studs Top 3 1 Mini-Slim Series 188246 M3912CK-6EUN-F 39 M/C130 120 45 Feet Side 5 1 188164 M7012CK-6EUN-F 70 M/C98, M/C139, M/C143 120 77 Feet Side 5 1 1 Mini-Square Series 188901 M2012-27CK-6EU-F 20 M/C156 120-277 24 Feet Side 10 188902 M2012-27CK-6EU-J 20 M/C156 120-277 24 Studs Top 9 1 1889031 M2012/27CK-6EU-JT3 20 M/C156 120/277 24/26 Studs Top 9 2a,2b,2c 188895 M3912-27CK-6EU-F 39 M/C130 120-277 44 Feet Side 10 1 188896 M3912-27CK-6EU-J 39 M/C130 120-277 44 Studs Top 9 1 1888971 M3912/27CK-6EU-JT3 39 M/C130 120/277 44/46 Studs Top 9 2a,2b,2c 188939 M7012-27CK-6EU-F 70 M/C98, M/C139, M/C143 120-277 77 Feet Side 10 1 188940 M7012-27CK-6EU-J 70 M/C98, M/C139, M/C143 120-277 77 Studs Top 9 1 1889411 M7012/27CK-6EU-JT3 70 M/C98, M/C139, M/C143 120/277 77/79 Studs Top 9 2a,2b,2c Standard Series 188610 M2012-27CK-5EU-F 20 M/C156 120-277 24 Feet Side 12 1 1886111 M2012/27CK-5EU-JT3 20 M/C156 120/277 24/26 Studs Top 13 2a, 2b, 2c 188156 M3912-27CK-5EU 39 M/C130 120-277 44 No Feet Side 14 1 188157 M3912-27CK-5EU-F 39 M/C130 120-277 44 Feet Side 12 1 188301 M3912-27CK-5EU-J 39 M/C130 120-277 44 Studs Top 13 1 1886291 M3912/27CK-5EU-JT3 39 M/C130 120/277 44/46 Studs Top 13 2a, 2b, 2c 1886302 M3912/27CK-5EU-JA3 39 M/C130 120/277 46/187 Studs Top 13 3a, 3b, 3c 188612 M5012-27CK-5EU-F 50 M148 or M110 120-277 56 Feet Side 12 1 1886131 M5012/27CK-5EU-JT3 50 M148 or M110 120/277 56/58 Studs Top 13 2a, 2b, 2c 188165 M7012-27CK-5EU 70 M/C98, M/C139, M/C143 120-277 78 No Feet Side 14 1 188166 M7012-27CK-5EU-F 70 M/C98, M/C139, M/C143 120-277 78 Feet Side 12 1 188167 M7012-27CK-5EU-J 70 M/C98, M/C139, M/C143 120-277 78 Studs Top 13 1 1886311 M7012/27CK-5EU-JT3 70 M/C98, M/C139, M/C143 120/277 79/81 Studs Top 13 2a, 2b, 2c 1886321 M7012/27CK-5EU-JA3 70 M/C98, M/C139, M/C143 120/277 81/212 Studs Top 13 3a, 3b, 3c 1886331 M10012/27CK-5EU-JT3 100 M/C90, M/C140 and M/C164 120/277 110/212 Studs Top 13 2a, 2b, 2c 188168 M10012-27CK-5EU 100 M/C90, M/C140 and M/C164 120-277 110 No Feet Side 14 1 188169 M10012-27CK-5EU-F 100 M/C90, M/C140 and M/C164 120-277 110 Feet Side 12 1 188302 M10012-27CK-5EU-J 100 M/C90, M/C140 and M/C164 120-277 110 Studs Top 13 1 1886341 M10012/27CK-5EU-JA3 100 M/C90, M/C140 and M/C164 120/277 112/235 Studs Top 13 3a, 3b, 3c 188638.053 M15012-27CK-5EU-F 150 M/C102/E and M/C142/E 120-277 163 Feet Side 16 1 188639.053 M15012-27CK-5EU-J 150 M/C102/E and M/C142/E 120-277 163 Studs Top 15 1 M15012/27CK-5EU-JT3 150 M/C102 and M/C142 120/277 163/165 Studs Top 15 2a, 2b, 2c 188989.051,3 Footnotes: 1 – “JT3” models have 120V power source for operating the heater on self-heating thermal protectors allowing dual-rated input voltage fixtures. 3 – Exceeds EISA 2007 90% minimum ballast efficiency requirement for 150W and higher HID lamp applications. PAGE 5-3 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) ELECTRONIC HID 2 – “JA3” models have same 120V power source as JT3 models , but also have an integrated auxiliary light control which drives a quartz restrike back-up lamp. Wiring Diagrams 1 N WHITE 120V RED L 1 BLACK BLUE GREEN 120/277V with IDTP Tap 2b WIRING (with 3-wire 120V IDTP) WIRING (with 4-wire 120V IDTP) RP-1B IDTP 2 black L blue N WHITE black 120/277 white 120/277 N WHITE PURPLE blue white L RP-5A IDTP 2 red 2a PURPLE BLACK BLACK GREEN GREEN RED RED 1 BLUE 1 BLUE 2c WIRING (with 3-wire 277V IDTP) RP-4A IDTP 2 L 277 N red white black WHITE PURPLE BLACK GREEN RED 1 BLUE 120/277V with Auxiliary Control + IDTP Tap Wiring & Dimensions Diagrams (shown in millimeters and inches) 3b WIRING (with 3-wire 120V IDTP) WIRING (with 4-wire 120V IDTP) RP-1B IDTP 2 N WHITE HALOGEN LAMP <150W L blue white black 120/277 black 120/277 N ORANGE PURPLE WHITE BLACK GREEN GREEN RED RED 1 Connect red lead to center contact on Edison base lampholders 2 IDTP - Insulation Detector Thermal Protector 1 BLUE Notes for Wiring Diagram 1 blue ORANGE PURPLE BLACK BLUE ELECTRONIC HID HALOGEN LAMP <150W red L RP-5A IDTP 2 white 3a 3c WIRING (with 3-wire 277V IDTP) RP-4A IDTP 2 L black 277 N WHITE HALOGEN LAMP <150W red white ORANGE PURPLE BLACK GREEN RED 1 BLUE PAGE 5-4 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Wiring Dimming Ballasts 4a 4b WIRING (For Fixed Output) WIRING (For Dimming Control) RED RED BLUE BLUE GREEN GREEN BLACK BLACK WHITE WHITE GREY (+) GREY (+) PURPLE (+) PURPLE (+) 0 - 10VDC DIMMER Dimensions 1 2 33.5/1.32 29.7/1.17 33.0/1.30 97.7/3.85 76.0/2.99 Temp. Testpoint 31.0/1.22 28.0/1.10 Temp. Testpoint 104.7/4.12 3 4 33.5/1.32 16.7/0.66 33.5/1.35 96.7/3.81 90.7/3.57 Temp. Testpoint 38.1/1.5 Temp. Testpoint 11.8/0.47 8-32 stud 50.8/2.0 PAGE 5-5 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) ELECTRONIC HID 30.1/1.19 Dimensions 5 6 28.6/ 44.2/ 1.13 1.74 28.6/ 44.2/ 1.13 1.74 133/5.25 133/5.25 140..0/5.51 140.0/5.51 30.0/1.18 30.0/1.18 7 8 44.2/ 1.74 64.8/2.55 75.6/2.98 22.1/ 0.87 127.8/5.03 50.8/2 86.8/3.42 10.9/0.43 95.1/3.74 39.5/ 1.56 Temp. Testpoint 9 30.6/1.21 10 76.2/3.0 64.8/2.55 75.6/2.98 38.1/1.5 86.8/3.42 89.4/3.52 95.1/3.74 50.8/2.0 11.8/0.47 8-32 stud 30.6/1.21 30.6/1.21 ELECTRONIC HID 11 12 64.8/2.55 72.1/ 2.84 76.0/2.99 92.0/ 3.62 46.0/ 1.31 86.8/3.42 133.5/5.26 95.1/3.74 140.0/5.51 39.9/1.57 31.8/1.25 PAGE 5-6 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Dimensions 13 14 92.0/3.62 92.0/ 3.62 46.0/1.31 127.5/5.02 8-32 stud 133.5/5.26 50.8/2.0 11.4/0.45 39.9/1.57 39.9/1.57 15 16 92.0/3.62 72.1/ 2.84 92.0/ 3.62 46.0/ 1.31 46.0/1.31 127.5/5.02 8-32 stud 133.5/5.26 50.8/2.0 140.0/5.51 11.4/0.45 39.9/1.57 39.9/1.57 17 72.0/ 2.84 92.0/ 3.62 46.0/ 1.31 202.0/ 7.95 208.0/ 8.19 60.0/2.36 ELECTRONIC HID PAGE 5-7 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Application And Operating Information General: If the electrical current through an HID lamp is properly stabilized, an HID plasma arc with very high luminous efficiency is created in the arc tube chamber resulting in a very efficient light source. The internal pressure of the arc tube chamber rises as the arc tube temperature increases and will attain between 1 and 10 bar; thereby, defining these lamps as high-pressure HID lamps, high intensity discharge lamps or simply HID lamps. The light output and color rendition of HID lamps vary considerably depending on the lamp family (mercury, metal halide or sodium lamps). HID lamps can only be started and operated with ballasts. Ignitors or ignition voltage characteristics are additionally required for sodium and metal halide lamps. As well as stabilizing the lamp’s operating point, ballasts also influence the lamp’s output and luminous flux, the system light output, the service life of the lamps as well as the color temperature of the light source. Electromagnetic or electronic ballasts can be used for HID lamps, but unlike fluorescent lamps, lamp efficiency is not significantly improved by the use of electronic ballasts. However, electronic ballasts can lead to a reduction of the inherent losses and thus to an increase in system efficiency. In addition, electronic ballasts can ensure gentle lamp operation, which may increase lamp’s service life. Electronic Ballasts for Metal Halide Lamps Electronic ballasts are designed with all the components required to operate metal halide lamps, including ignition, power factor correction, and stable normal operation. Furthermore, they safely shutdown lamps at the end of their service life to prevent high temperatures from being generated in the luminaires that could influence the service life of the luminaire or its components. Universal Lighting Technologies also provides special electronic ballasts for additional luminaire functions such as heater power for insulation detection thermal protectors and for switching on of an auxiliary incandescent lamp for the dark phase of an HID lamp during initial warm-up or during hot-restrike cool-down mode. Standards/Regulations ANSI C82.14 Low-Frequency Square Wave Electronic Ballasts for Metal Halide Lamps UL 1598 Standard for Safety-Luminaires ANSI C82.77 Harmonic Emission Limits-Related Power Quality Requirements or Lighting Equipment ANSI/UL 1029 Standard for Safety-High Intensity HID Lamp Ballasts ANSI/IEEE C62.41 Surge Voltages in Low Voltage AC Power Circuits ELECTRONIC HID US Code of Federal Regulations Title 47 –Telecommunications Part 18– Industrial, Scientific and Medical Devices PAGE 5-8 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Application And Operating Information Technical Specifications: Operating voltage range 120VAC rated: 120V 277V ±10% 277VAC rated: 277V ±10% 120–277V rated: 108V–305V 120/277V rated: 108V–132V and 249V–305V Leakage current ≤0.5mA Hot restrike auxiliary lamp operation In order to ensure continuous illumination even during the ignition period or in the event of a lamp drop-out due to short term power outage, an additional incandescent lamp (maximum 150W) can be used on models designated with a JA suffix. Short circuit issues The ballast output metal halide lamp leads are basically short-circuit-proof. However, any shorts or connections between those lamp leads to the ballast case or to safetyneutral (earth ground) will destroy the ballasts. Likewise the metal halide lamp leads shall not be connected to input power connections nor shall the auxiliary lamp leadsbe shorted together otherwise the ballast’s circuitry could be damaged or fail. Provisions in the luminaire design should be implemented to prevent all lead wires but especially lamp leads from being pinched, damaged, or cut during luminaire assembly, field installation or normal service. Mechanical Mounting: Surface Firm, flat, preferably metal surface required to ensure good heat transfer for long ballast service life and reliability. Avoid mounting on uneven or protruding surfaces. Mounting Location Electronic ballasts must be protected against moisture and heat. Outdoor applications must utilize luminaires with the appropriate weatherproof ratings depending on location. Most Universal Lighting Technologies electronic ballasts are rated “Outdoor Type 1”. Fastening Use mechanical means to ensure ballasts are fixed tightly to flat surfaces. Use appropriately sized screws depending on the ballast mounting slot size or spring clips to provide interference fit. If ballast is destined for installation in a luminaire, sufficient heat transfer must be ensured between the electronic ballast and the luminaire housing. Electronic ballasts should be mounted with the greatest possible clearance from heat sources or lamps. During operation, the temperature measured at the ballast’s tc point must not exceed the specified maximum value. PAGE 5-9 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) ELECTRONIC HID Heat transfer Application And Operating Information Technical Specifications: • Dimensional tolerances: – Case: ±1mm (±0.039”) – Standard lead length tolerances: +50mm (+2”) or –30mm (–1”) Micro lead length tolerances: ±15mm (±0.6”) – Slot width on “F” mounting tabs: 5mm (0.20”); for Mini-Square Size: 4mm (0.157”) • Remote wiring guidelines: – Each lamp’s lead wires must be run in a separate conduit from the input power leads to achieve good EMI performance and maximum remote capabilities. Lamp leads shall not be bundled together, but each set of lamp leads shall be run in its own conduit. – Individual lamp lead wires must be used for external fixture wire extensions using wire types SF-2 (equivalent to SEW-2 or 3071) or SFF-2 (equivalent to SEWF-2 or 3070) or alternately, if approved by ULT, high voltage luminaire wire with a 18AWG conductor and a 1000VAC minimum voltage rating. Temperature rating is especially critical if the lamp lead extension wires are directly connected to lampholder terminals. – Maximum remote distances: See individual model specification sheets. The specified maximum remote distances are based on lamp leads run in a minimum ½” internal diameter conduit, pipe or flexible conduit. For longer remote distances contact the TES group at Universal Lighting. – Using service power cords (types SJ, SO, ST, SV etc.) or metal clad cable assemblies for lamp lead extension wire are not recommended as they are not compatible with the above characteristics, can cause starting problems and shall not be used unless ULT gives written approval. Insulation clearance ELECTRONIC HID Remote mounted ballasts shall be installed per National Electrical Code and local codes while also complying with wiring methods per Universal Lighting Technologies recommendations. Per UL requirements, thermal insulation shall be a minimum of 3” from any ballast surface. PAGE 5-10 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Application And Operating Information Safety Functions: Regulatory approvals Universal Lighting Technologies electronic HID ballasts are UL listed or UL recognized component and cUL listed for use in Canada. Shutdown of defective lamps In the event of a lamp failing to ignite or of a lamp with low or high operating voltages (end of lamp’s service life), the electronic ballast will switch off after a defined period of time (typically 30 minutes). The ballast will also shut-down if the lamp fails to achieve symmetrical current operation (rectification) or if lamp leads are shorted to each other. After lamp replacement, the ballast output can be reset by disconnecting (count to 10) and then reconnecting input power. Transient input voltage Electronic ballasts incorporate transient protection that complies with ANSI C62.41 and ANSI C82.14 test procedure and values. Temperature Protection To prevent excess temperatures, ballasts contain thermal protection devices or thermal sensing circuitry. A ballast will restart after it has cooled down, however, it might be necessary to briefly reset the input power after the over-temperature condition is resolved. General guidelines Always disconnect power to the luminaire before installation or service of the ballasts. Install to all provisions of local or National Electric Codes. The ballast case/green lead must be grounded. Dispose of any replaced ballasts or lamps properly per local environmental regulations. Reliability and Service Life: The electronic ballast service life is inversely proportional to the temperature of its critical internal components. Normal ballast operation shall have the temperature of the tc point less than the warranted values in the individual specification sheets Electrical Installation: 3-Phase connection of luminaires with electronic ballasts Power factor compensation Luminaires with electronic ballasts do not need power factor compensation, as the typical power factor range of electronic ballasts is 95 to 99%. PAGE 5-11 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) ELECTRONIC HID Prior to operating newly installed lighting systems, please check the ballast’s rated voltage range to ensure it is appropriate for the job site input power supply voltage. The neutral power supply wire must be connected securely to all luminaires and to all ballasts. Power supply conductors must only be connected or disconnected when the circuit is not energized. The neutral conductor must never be disconnected as the first disconnected wire nor individually at the circuit panel, at a distribution wiring junction box or at the luminaire during energized power supply operation as out-of balance voltage operation can lead to serious over-voltages and subsequent ballast failures. Application And Operating Information Wiring Wiring between the power supply, electronic ballasts and lamp must comply with the respective circuit diagram. Note: the ballast (metal) case (using toothed washer) or provided green lead must be connected to safety-neutral (earth ground). In addition, all metal luminaire parts and metal lamp reflector/housings shall also be connected to earth ground for safety and for proper lamp starting. Metal halide luminaires must only be fitted with electrical components that are rated to withstand ignition voltages of 4kV. To ensure compliance with RFI suppression limits, input and output conductors should not be run in the same conduit as lamp conductors. Conduit size recommendations are stated in the individual ballast specification sheets or construction notes. Lamp maintenance notice To replace end-of-service lamps, turn-off luminaire power, remove and replace lamps then turn-on luminaire power. If power was not turned off during lamp replacement, the luminaire/ballast-input power must be reset to restart the new lamp. If the lamp or wiring is defective, the ballast will “shut-down” in 1.5 to 30 minutes depending upon the fault condition. Supplemental IDTP wiring The IDTP (insulation detector thermal protector) is required by UL for most recessed luminaires. This fast acting thermal protector is typically mounted on the same junction box as the electronic ballast. Special “JT” electronic ballasts provide a separate 120V power supply for the IDTP heater to allow the luminaire to be rated for both 120V and 277V operation. See the individual ballast specifications for the proper wiring procedures for JT & JA ballasts with this IDTP heater function. Note: When using JT or JA ballasts on multiple lamp luminaires, only one ballast yellow or purple lead should be connected to the IDTP heater. All other ballasts’ yellow or purple leads should be capped-off. Operation of JT and JA ballasts on 208V and 240V is not recommended, as the IDTP may not function properly. Lamp compatibility Not all HID lamps are compatible with all electronic ballasts. Therefore, consult with Universal Lighting Technologies Technical Support or a specific lamp company regarding a certain lamp’s compatibility. External fuse ratings ELECTRONIC HID All Universal Lighting Technologies electronic HID ballasts have internal fuses for EOL protection; however, if external fuses are specified, use a 3A slow blow fuse for 20W-100W ballasts and a 5A slow blow fuse for 150W & 210W ballasts. PAGE 5-12 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Notes ELECTRONIC HID PAGE 5-13 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Vossloh Schwabe, a subsidiary of the Panasonic group, has been manufacturing and providing lampholders of the highest quality and reliability to the European and US markets since 1920. With products available to meet all your lamp, ballast, and fixture requirements, these lampholders will deliver peace of mind for years to come. LAMPHOLDERS Universal Lighting Technologies is a member of the Panasonic Group Application And Operating Information Mounting Styles: With the different fixture designs and applications in the market there are a number of lampholder mounting configurations available to meet all applications. These mounting styles, while demonstrated and geared towards linear fluorescent lamps, are also applicable to compact fluorescent lampholders as well. Push Through: The push through lampholder is the most common in the United States. This lampholder is inserted into a rectangular cut-out in the fixture and snaps into place with ballast wires being inserted into the base from underneath. Snap-In: Snap-In lampholders are available in two styles. The first is very similar application wise to the push through style with the difference being that it is pushed into the fixture from the top instead of the bottom. These lampholders wire from the bottom of the fixture as well. The second variant snaps in from the top as well but uses pin holes instead of a rectangular cutout. This allows the customer to use that actual fixture to mount the lampholder instead of a dedicated socket bar. Wiring this type of lampholders is done either through the bottom or laterally through the sides of the lampholder. LAMPHOLDERS Butt On: These lampholders are designed to mount directly to the sides of the fixture and are available with two mounting options. One has through holes for M3 screws, the second has pins either laterally or vertically across the back of the lampholder that snap into two pre-drilled holes in the fixture housing. Both models are available with spring mounts and two different thicknesses (9mm and 13.5mm). Contact egress is available from the side or bottom of the lampholder. PAGE 6-2 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Application And Operating Information Slide On: These lampholders simply slide onto the end of a fixture into a knocked out channel. All version of this lampholder wire from the bottom. Slides into existing channel at the end of the fixture Rotor Styles: Integrated Rotor: Our integrated rotor system is a single piece construction that is simple and easy to use with no moving parts and an easy lamp insertion force. Moving Rotor: Moving rotor systems have a separate piece in the center of the lampholder that rotates with the lamp to aid in locking it in place. Two different systems are available; the Big Rotor system and our Roto-Clic system which has an audible click when the lamp is fully seated in the lampholder. Shunting: Non-Shunted lampholder have two individual contacts inside, one contact for each pin of the lamp. Each contact has its own separate wire terminal on either side of the lampholder. This type of lampholder is used with programmed or rapid start ballasts. Shunted lampholders have one continuous contact running through the lampholder that electrically connects both pins of the lamp together. These lampholders will only have push in contacts on one side of the lampholder and are used with instant-start ballasts. Lamp Axis: Lamp axis is the distance from the surface of the fixture to the center of the lamp. For T8 and T12 lamps, these are commonly referred to as low profile for T8 only (16mm), standard (23mm), and tall (31mm) and can vary by a couple mm from manufacturer to manufacturer. ELECTRONIC HID PAGE 6-3 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Application And Operating Information Lamp Stop: Lamp stop or “nib” as it is sometime called is a small pin the extends up from the front of some push through lampholders. This can be used to assist in locating the lampholder in the fixture or to help provide a slight inward rake to the lampholder. Lampholder Springs: Butt-On style lampholders can be purchased with or without a spring. These are small metal clips on the rear of the lampholder that help to provide compression on the lamp. They can be used on either side of the fixture or both as required by the manufacturer. Circle I: This stems from a UL requirement for instant start systems to contain either a type CC rated ballast or a “Circle I” rated lampholder. At this time, all of our shunted or instant start lampholders meet this requirement and are marked accordingly with the I mark. Nomenclature: Our lampholders carry both a type number and a reference number. The type number is more like a family number where the numeric character signify similarities and differences as you progress through the five digit number. For example, the 291xx series are all 23mm, push-through, lampholders for T8/T12 lamps. As you move further into these numbers it signifies other identifiers like shunting and stopping pins. The reference number is the orderable number that is used to order the exact product. Packaging: Standard packing through ULT is in full bag quantities. For linear fluorescent lampholders this is commonly 1,000 piece, for compact fluorescent 500, and for HID, Halogen, and eHID this ranges from 10-250 pieces. Packing quantities vary by model and are listed on all spec sheets. ELECTRONIC HID A select number of our lampholders are available in smaller “distributor friendly” packages, please consult your ULT sales representative for more information. PAGE 6-4 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Snap-In Lampholders T8 & T12 Snap-In Lampholders Reference Number Lamps Lamp Axis (mm) Shunted Push-In Terminals Recommended Cut-Out (mm) Drawing Weight Unit Pcs. 23370 539128 T8 18 - Lateral ø5.5 x 23 1 5.3 1000 23372 539140 T8 18 Shunted Right Lateral ø5.5 x 23 1 5.3 1000 23374 539141 T8 18 Shunted Left Lateral ø5.5 x 23 1 5.3 1000 24350 537153 T8/T12 23.5 - Base ø5.5 x 23 2 5.7 1000 24352 536320 T8/T12 23.5 Shunted Base ø5.5 x 23 2 5.7 1000 23350 537157 T8/T12 23.5 - Lateral ø5.5 x 23 1 5.8 1000 23352 536293 T8/T12 23.5 Shunted Right Lateral ø5.5 x 23 1 5.8 1000 23354 536294 T8/T12 23.5 Shunted Left Lateral ø5.5 x 23 1 5.8 1000 24360 537155 T8/T12 30 - Base ø5.5 x 23 2 5.9 1000 24362 536322 T8/T12 30 Shunted Base ø5.5 x 23 2 5.9 1000 23360 537160 T8/T12 30 - Lateral ø5.5 x 23 1 6 1000 23362 536284 T8/T12 30 Shunted Right Lateral ø5.5 x 23 1 6 1000 23364 537160 T8/T12 30 Shunted Left Lateral ø5.5 x 23 1 6 1000 24150 537144 T8 18 - Lateral 13.3 x 25.5 3 5.4 1000 21452 536309 T8 18 Shunted Right Lateral 13.3 x 25.5 3 5.4 1000 24154 536310 T8 18 Shunted Left Lateral 13.3 x 25.5 3 5.4 1000 24140 537141 T8 18 - Lateral 10 x 20 5 6 1000 24142 536306 T8 18 Shunted Right Lateral 10 x 20 5 6 1000 24144 536307 T8 18 Shunted Left Lateral 10 x 20 5 6 1000 24170 537150 T8/T12 21 - Lateral 13.3 x 25.5 3 5.6 1000 24172 536315 T8/T12 21 Shunted Right Lateral 13.3 x 25.5 3 5.6 1000 24174 536316 T8/T12 21 Shunted Left Lateral 13.3 x 25.5 3 5.6 1000 24160 537147 T8/T12 21 - Lateral 10 x 20 5 6 1000 24162 536312 T8/T12 21 Shunted Right Lateral 10 x 20 5 6 1000 24164 536313 T8/T12 21 Shunted Left Lateral 10 x 20 5 6 1000 24100 537132 T8/T12 25 - Lateral 13.3 x 25.5 3 9 1000 24102 536297 T8/T12 25 Shunted Right Lateral 13.3 x 25.5 3 9 1000 24104 536298 T8/T12 25 Shunted Left Lateral 13.3 x 25.5 3 9 1000 24110 537165 T8/T12 25 - Lateral 13.3 x 25.5 4 9 1000 24112 536300 T8/T12 25 Shunted Right Lateral 13.3 x 25.5 4 9 1000 24114 536301 T8/T12 25 Shunted Left Lateral 13.3 x 25.5 4 9 1000 24120 537138 T8/T12 25 - Lateral 10 x 20 5 5.7 1000 24122 536303 T8/T12 25 Shunted Right Lateral 10 x 20 5 5.7 1000 24124 536304 T8/T12 25 Shunted Left Lateral 10 x 20 5 5.7 1000 * Consult www.UNVLT.com for complete lampholder offering and complete specs. 1 3 2 4 PAGE 6-5 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) LAMPHOLDERS Type Push-Through, Slide-On Lampholders T8 & T12 Push-Through Lampholders Type Reference Number Lamps Lamp Axis (mm) Shunted Lamp Stop Recommended Cut-Out (mm) Drawing Weight (g) 29300 509134 T8 16 - W/ Stop 9 x 25.5 6 4.7 Unit Pcs. 1000 29300 509136 T8 16 Shunted W/ Stop 9 x 25.5 6 4.7 1000 29301 509135 T8 16 - - 9 x 25.5 6 4.5 1000 29301 509137 T8 16 Shunted - 9 x 25.5 6 4.5 1000 29100 545845 T8/T12 23 - W/Stop 9 x 25.5 7 6.8 1000 29101 545849 T8/T12 23 - - 9 x 25.5 7 6.8 1000 29125 545840 T8/T12 23 Shunted W/Stop 9 x 25.5 7 6.8 1000 29126 545842 T8/T12 23 Shunted - 9 x 25.5 7 6.8 1000 28700 109342 T8/T12 31 - W/ Stop 9 x 25.5 9 7.8 1000 28725 109376 T8/T12 31 Shunted W/ Stop 9 x 25.5 9 7.8 1000 28701 109343 T8/T12 31 - - 9 x 25.5 9 7.8 1000 28726 109377 T8/T12 31 Shunted - 9 x 25.5 9 7.8 1000 * Consult www.UNVLT.com for complete lampholder offering and complete specs. Slide-On Lampholders Type Reference Number Lamps Lamp Axis (mm) Shunted Lamp Stop Recommended Cut-Out (mm) Drawing Weight (g) Unit Pcs. 29150 545858 T8/T12 23 - 0.5 - 0.8 9.15 x 26.2 10 6.8 1000 29155 545862 T8/T12 23 Shunted 0.5 - 0.8 10 6.8 1000 LAMPHOLDERS * Consult www.UNVLT.com for complete lampholder offering and complete specs. 6 9 7 10 PAGE 6-6 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Butt-On Lampholders T8 & T12 Butt-On Lampholders Type Reference Number Lamps Lampholder Thickness 49505 537174 T8/T12 9.5 - - ø4.2 x 26 11 5 1000 49525 536337 T8/T12 9.5 Shunted - ø4.2 x 26 11 5 1000 49506 537175 T8/T12 9.5 - X ø4.2 x 26 12 5.5 1000 49526 536338 T8/T12 9.5 Shunted X ø4.2 x 26 12 5.5 1000 59505 537206 T8/T12 9.5 - - ø4.2 x 26 13 4.8 1000 59525 536369 T8/T12 9.5 Shunted Right - ø4.2 x 26 13 4.8 1000 59545 536373 T8/T12 9.5 Shunted Left - ø4.2 x 26 13 4.8 1000 59506 537207 T8/T12 9.5 - X ø4.2 x 26 14 4.8 1000 59526 536370 T8/T12 9.5 Shunted Right X ø4.2 x 26 14 4.8 1000 59546 536347 T8/T12 9.5 Shunted Left X ø4.2 x 26 14 4.8 1000 49105 537166 T8/T12 13 - - ø4.2 x 26 11 5.1 1000 49125 536329 T8/T12 13 Shunted - ø4.2 x 26 11 5.2 1000 49106 537167 T8/T12 13 - X ø4.2 x 26 12 5.9 1000 49126 536330 T8/T12 13 Shunted X ø4.2 x 26 12 5 1000 59105 537182 T8/T12 13 - - ø4.2 x 26 13 5 1000 59125 536325 T8/T12 13 Shunted Right - ø4.2 x 26 13 5 1000 59145 536349 T8/T12 13 Shunted Left - ø4.2 x 26 13 5 1000 59106 537183 T8/T12 13 - X ø4.2 x 26 14 5 1000 59126 536346 T8/T12 13 Shunted Right X ø4.2 x 26 14 5 1000 59146 536350 T8/T12 13 Shunted Left X ø4.2 x 26 14 5 1000 49500 537173 T8/T12 9.5 - - Holes 25mm O.C. 15 5 1000 49520 536336 T8/T12 9.5 Shunted - Holes 25mm O.C. 15 5 1000 47502 101740 T8/T12 9.5 - X Holes 25mm O.C. 16 5.5 1000 59500 537205 T8/T12 9.5 - - Holes 25mm O.C. 17 4.7 1000 59520 536368 T8/T12 9.5 Shunted Right - Holes 25mm O.C. 17 4.7 1000 59541 536372 T8/T12 9.5 Shunted Left - Holes 25mm O.C. 17 4.7 1000 49100 537165 T8/T12 13 - - Holes 25mm O.C. 15 5 1000 49120 536328 T8/T12 13 Shunted - Holes 25mm O.C. 15 5 1000 47102 404681 T8/T12 13 - X Holes 25mm O.C. 16 6 1000 59100 537181 T8/T12 13 - - Holes 25mm O.C. 17 5 1000 59420 536344 T8/T12 13 Shunted Right - Holes 25mm O.C. 17 5 1000 59140 536348 T8/T12 13 Shunted Left - Holes 25mm O.C. 17 5 1000 Shunted Spring Adjustment Recommended Cut-Out (mm) Drawing Weight Unit Pcs. 11 13 12 14 PAGE 6-7 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) LAMPHOLDERS * Consult www.UNVLT.com for complete lampholder offering and complete specs. Butt-On Lampholders T8 & T12 15 17 LAMPHOLDERS 16 PAGE 6-8 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Push-Through, Snap-In, Butt-On Lampholders T5 Push-Through Lampholders Type Reference Number Lamps Lamp Axis Lamp Stop Recommended Cut-Out (mm) Drawing Weight Unit Pcs. 09420 505737 T5/T5HO 15 X 9.7 x 19.5 1 3.4 1000 09421 505739 T5/T5HO 15 - 9.7 x 19.5 1 3.3 1000 09432 545933 T5/T5HO 20 X 9.7 x 19.5 2 3.6 1000 09433 545935 T5/T5HO 20 - 9.7 x 19.5 2 3.6 1000 09434 545937 T5/T5HO 25 X 9.7 x 19.5 3 3.9 1000 09435 545939 T5/T5HO 25 - 9.7 x 19.5 3 3.9 1000 09426 505745 T5/T5HO 35 X 9.7 x 19.5 4 4.5 1000 09427 505746 T5/T5HO 35 - 9.7 x 19.5 4 4.5 1000 09105 100305 T5/T5HO 13.2 Screw Fixing 9.7 x 19.5 5 3.2 1000 Lamp Stop * Consult www.UNVLT.com for complete lampholder offering and complete specs. Snap-In Lampholders Type Reference Number Lamps Lamp Axis Recommended Cut-Out (mm) Drawing Weight Unit Pcs. 09440 505747 T5/T5HO 14 9.7 x 19.5 6 3.3 1000 09446 545894 T5/T5HO 18 9.7 x 19.5 7 3.5 1000 09447 545896 T5/T5HO 23 9.7 x 19.5 8 3.8 1000 09450 505750 T5/T5HO 15 ø3.7 x 13.2 9 3.4 1000 09460 505751 T5/T5HO 11.8 ø3.2 x 19.5 10 3.1 1000 09465 508314 T5/T5HO 11.8 ø3.2 x 19.5 11 3.1 1000 ø3.2 x 18 * Consult www.UNVLT.com for complete lampholder offering and complete specs. Butt-On Lampholders Type Reference Number Lamps Lampholder Thickness Spring Adjustment 09404 505732 T5/T5HO 9.3 - 09405 505733 T5/T5HO 9.3 - 09406 505734 T5/T5HO 9.3 09407 508590 T5/T5HO 09415 505735 09416 09205 Recommended Cut-Out (mm) Drawing Weight Unit Pcs. 13 2.8 1000 ø3.8 x 20 14 2.9 1000 X ø3.8 x 20 14 3.3 1000 12.5 - ø3.8 x 20 15 3 1000 T5/T5HO 9.3 - ø3.8 x 10 16 2.9 1000 505736 T5/T5HO 9.3 X ø3.2 x 10 16 3.2 1000 100310 T5/T5HO 9.3 - ø3.2 x 10 17 2.5 1000 1 3 2 4 PAGE 6-9 LAMPHOLDERS * Consult www.UNVLT.com for complete lampholder offering and complete specs. FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Butt-On Lampholders T5 11 5 13 6 14 7 LAMPHOLDERS 15 16 8 9 17 10 PAGE 6-10 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) GU6.5, G8.5, GX8.5, GY9.5, GX10, G(X)12, K12S-7, PGJ5, RX7s Lampholders Type Reference Number Lamp Type Material Mounting 34515 534218 GU6.5 Ceramic 34516 534219 GU6.5 34525 538634 GU6.5 HID Lead Length Lead Material Drawing Weight Unit Pcs. #4 Screw Holes 15mm OC 305mm PTFE 1 20 100 Ceramic Threaded #4 Holes 15mm OC 305mm PTFE 1 20 100 Ceramic #4 Screw Holes 15mm OC 200mm PTFE 2 15 100 GU6.5 G8.5 33650 526018 G8.5 Ceramic #4 Screw Holes 15mm OC Terminals N/A 3 12.6 150 33600 502394 G8.5 Ceramic #4 Screw Holes 15mm OC Terminals N/A 3 5 1000 34650 547807 GX8.5 LCP #4 Screw Holes 23mm OC Terminals N/A 4 11.9 50 34651 547808 GX8.5 LCP #4 Screw Holes 23mm OC Terminals N/A 4 12.6 50 37002 534105 GY9.5 Ceramic #4 Screw Holes 30mm O.C. 305mm SF-2 5 62 25 100 GX8.5 GY9.5 GX10 31550 543963 GX10 Steatitie #4 Screw Holes 18mm OC 200mm 7 21.7 31550 543153 GX10 Steatitie #4 Screw Holes 18mm OC 305mm 7 25 100 31400 509356 GX10 PPS #4 Screw Holes 18mm OC Terminals 8 9.2 100 31402 537049 GX10 PPS #4 Screw Holes 18mm OC 240mm 8 33.9 100 31402 534636 GX10 PPS #4 Screw Holes 18mm OC 460mm 8 33.9 100 31402 534050 GX10 PPS #4 Screw Holes 18mm OC 765mm 8 33.9 100 31402 536822 GX10 PPS #4 Screw Holes 18mm OC 915mm 8 33.9 100 25 N/A G(X)12 31921 526251 G12 Ceramic #8 Screw Holes 30mm OC 765mm PTFE 9 72 31921 529773 G12 Ceramic #8 Screw Holes 30mm OC 1170mm PTFE 9 88 25 31936 108257 G12 Ceramic #8 Screw Holes 30mm OC 460mm SF-2 10 56 25 31936 525750 G12 Ceramic #8 Screw Holes 30mm OC 765mm SF-2 10 72 25 31936 526211 G12 Ceramic #8 Screw Holes 30mm OC 1524mm SF-2 10 144 25 42000 509213 G12 LCP #8 Screw Holes 30mm OC N/A N/A 11 20 25 41900 507656 GX12 Ceramic #8 Screw Holes 30mm OC 300mm SI 12 58.5 25 21100 107652 K12s-7 Ceramic N/A - Socket Only Terminals N/A 13 25 25 21100 107677 K12s-7 Ceramic #10 Screw Holes 61.4mm OC Terminals N/A 13 70 25 K12s-7 34155 538630 PGJ5 Ceramic #4 Screw Holes 11.6mm OC 460mm PTFE - Lat 14 21.7 100 34116 534102 PGJ5 Ceramic #4 Screw Holes 11.6mm OC 305mm PTFE - Cent 15 11.5 100 34116 537057 PGJ5 Ceramic #4 Screw Holes 11.6mm OC 460mm PTFE - Cent 15 18.6 100 34116 537784 PGJ5 Ceramic #4 Screw Holes 11.6mm OC 765mm PTFE - Cent 15 27.8 100 34125 537454 PGJ5 Ceramic #4 Screw Holes 11.6mm OC 200mm PTFE - Lat 16 10.5 100 34125 535782 PGJ5 Ceramic #4 Screw Holes 11.6mm OC 305mm PTFE - Lat 16 12.5 100 34125 542304 PGJ5 Ceramic #4 Screw Holes 11.6mm OC 460mm PTFE - Lat 16 14.5 100 30608 108913 RX7s Ceramic #8 Screw Holes 34mm OC 460mm PTFE 17 72 25 30611 100732 RX7s Ceramic #8 Screw Holes 34mm OC 305mm SF-2 17 68 25 31662 107065 RX7s PPT #8 Screw Holes 34mm OC 300mm SI 18 23 25 32301 506216 RX7s Ceramic Captive mounting for #8 Screw 360mm SF-2 19 34 300 32330 100928 RX7s Ceramic Central tapped hole for #8 Screw 300mm SI 19 75 200 RX7s PAGE 6-11 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) LAMPHOLDERS PGJ5 E26, E39 Lampholders HID Type Reference Number Lamp Type Material Mounting Lead Length Lead Material Drawing Weight Unit Pcs. 62609 109459 E26 Porcelain #8 Screw Holes 18mm OC 62610 525523 E26 Terminals N/A 20 64 200 Porcelain Bushings for #8 Screw 18mm OC Terminals N/A 20 64 62030 102597 200 E26 Porcelain #8 Screw Holes 18mm OC Terminals N/A 21 61 64707 200 504262 E26 PET - White ST #7 Screws 18mm OC Terminals N/A 22 15.4 64707 500 506381 E26 PET - Black ST #7 Screws 18mm OC Terminals N/A 22 15.4 500 E26 E39 12870 109014 E39 Porcelain Bushings 35mm OC Terminals N/A 23 190 50 12876 109518 E39 w/grip Porcelain Bushings 35mm OC Terminals N/A 23 190 50 12850 108851 E39 Porcelain #10 Screw Holes 30mm OC Terminals N/A 24 208 50 12851 109272 E39 w/grip Porcelain #10 Screw Holes 30mm OC Terminals N/A 24 208 50 12860 108869 E39 Porcelain Bracket for #10 Screws 56.5mm OC Terminals N/A 25 219 50 12861 109460 E39 w/grip Porcelain Bracket for #10 Screws 56.5mm OC Terminals N/A 25 219 50 12862 108870 E39 w/grip Porcelain Bracket for #10 ST Screws 56.5mm OC Terminals N/A 26 227 50 12650 501981 E39 PPS #10 Screw Holes 30mm OC Terminals N/A 27 109 50 12660 501982 E39 PPS Bracket for #10 Screws 56.5mm OC Terminals N/A 28 119 50 LAMPHOLDERS 1 2 3 4 5 6 PAGE 6-12 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID Lampholders 7 HID 13 8 14 9 15 10 LAMPHOLDERS 16 11 17 12 PAGE 6-13 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) HID Lampholders HID 18 23 24 19 25 20 LAMPHOLDERS 26 21 27 22 28 PAGE 6-14 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) B15d, G(Z)4 G(X)5.3 G(Y)6.35, G(Z)4, G9, G53, GU4 Lampholders Type Reference Number Lamp Type Material Mounting 48101 108925 B(A)15d Steel/Ceramic 48102 102927 B(A)15d 78103 102929 B(A)15d HALOGEN Lead Length Lead Material Drawing Weight Unit Pcs. #4 Screw Holes 25.5mm OC Terminals w/ground 1 16 500 Steel/Ceramic #4 Screw Holes 25.5mm OC Terminals N/A 2 17 500 Steel/Ceramic #4 Screw Holes 25.5mm OC Terminals w/ground 2 18 500 B15d G(Z)4 G(X)5.3 G(Y)6.35 32400 109855 G4/G5.3/G6.35 Ceramic #4 Screw Holes 11.5mm OC 152mm PTFE 3 8.1 1000 32400 536857 G4/G5.3/G6.35 Ceramic #4 Screw Holes 11.5mm OC 200mm PTFE 3 8.3 1000 32400 109856 G4/G5.3/G6.35 Ceramic #4 Screw Holes 11.5mm OC 300mm PTFE 3 8.5 1000 32400 525681 G4/G5.3/G6.35 Ceramic #4 Screw Holes 11.5mm OC 665mm PTFE 3 8.8 1000 32400 100946 G4/G5.3/G6.35 Ceramic #4 Screw Holes 11.5mm OC 750mm PTFE 3 9 1000 32480 504542 G4/G5.3/G6.35 Ceramic #4 Screw Holes 11.5mm OC 300mm PTFE 4 8.8 1000 32700 109851 G4/G5.3/G6.35 Ceramic #4 Screw Holes 11.4mm OC 155mm PTFE 5 12.8 1000 32700 109852 G4/G5.3/G6.35 Ceramic #4 Screw Holes 11.4mm OC 305mm PTFE 5 12.8 1000 32700 109853 G4/G5.3/G6.35 Ceramic #4 Screw Holes 11.4mm OC 590mm PTFE 5 12.8 500 32720 525857 G4/G5.3/G6.35 Ceramic #4 Screw Holes 26mm OC 320mm PTFE 6 8.7 1000 32720 529699 G4/G5.3/G6.35 Ceramic #4 Screw Holes 26mm OC 960mm PTFE 6 8.7 1000 G(Z)4 30449 530250 G(Z)4 PPS #4 Screw Holes 20mm OC 140mm PTFE 7 3.8 1000 60464 108892 G(Z)4 PPS N/A Terminals N/A 9 2.2 1000 60469 108893 G(Z)4 PPS N/A Terminals N/A 10 1.9 1000 32500 101035 G(Z)4 PPS #4 Screw Holes 12mm OC 140mm PTFE 11 8.7 500 32500 509069 G(Z)4 PPS #4 Screw Holes 12mm OC 195mm PTFE 11 8.9 500 32500 509035 G(Z)4 PPS #4 Screw Holes 12mm OC 765mm PTFE 11 9.8 500 33710 508306 G9 LCP 20.8x2 Ext, #3 Holes 14mm OC Terminals N/A 12 6 1000 33711 520728 G9 LCP 20.8x2 Ext, #4 Holes 23mm OC Terminals N/A 13 8.7 1000 33721 508610 G9 Ceramic 20.8x2 Ext, #4 Holes 23mm OC Terminals N/A 13 10.6 1000 1000 G9 508611 G9 Ceramic 20.8x2 Ext, #4 Holes 23mm OC Terminals N/A 13 10.2 509357 G9 Ceramic/LCP N/A Terminals N/A 14 7.5 1000 33900 534132 G9 Ceramic N/A 140mm PTFE 15 14.2 1000 33500 502004 G9 Ceramic #4 Screw Holes 17mm OC Terminals N/A 16 16 1000 140mm PTFE 17 3.8 1000 G53 33100 107694 G53 PPS #8 Screw Holes GU4 32400 109855 GU4 Ceramic #4 Screw Holes 11.5mm OC 152mm PTFE 18 8.1 1000 32400 109856 GU4 Ceramic #4 Screw Holes 11.5mm OC 300mm PTFE 18 8.1 1000 32400 525681 GU4 Ceramic #4 Screw Holes 11.5mm OC 665mm PTFE 18 8.1 1000 32400 536857 GU4 Ceramic #4 Screw Holes 11.5mm OC 200mm PTFE 18 8.1 1000 32412 538286 GU4 Ceramic 460mm PTFE 18 8.1 1000 32480 504542 GU4 Ceramic #4 Screw Holes 11.5mm OC 300mm PTFE 19 8.8 1000 32700 109851 GU4 Ceramic #4 Screw Holes 11.4mm OC 155mm PTFE 20 12.8 1000 32700 109852 GU4 Ceramic #4 Screw Holes 11.4mm OC 305mm PTFE 20 12.8 1000 32700 109853 GU4 Ceramic #4 Screw Holes 11.4mm OC 590mm PTFE 20 12.8 1000 32720 525857 GU4 Ceramic #4 Screw Holes 26mm OC 320mm PTFE 21 8.7 1000 32720 529699 GU4 Ceramic #4 Screw Holes 26mm OC 960mm PTFE 21 8.7 1000 PAGE 6-15 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) LAMPHOLDERS 33721 33800 GU5.3, GU10/GZ10, R7s Lampholders HALOGEN Type Reference Number Lamp Type Material Mounting Lead Length Lead Material Drawing Weight Unit Pcs. 32480 106457 GU5.3 Ceramic #4 Screw Holes 11.5mm OC 32480 504542 GU5.3 140mm PTFE 22 8.8 1000 Ceramic #4 Screw Holes 11.5mm OC 300mm PTFE 22 9.1 32680 101248 1000 GU5.3 Ceramic #4 Screw Holes 12mm OC 140mm PTFE 23 11 32690 500 536856 GU5.3 Ceramic #4 Screw Holes 12mm OC 140mm PTFE 23 12 500 33300 109547 GU5.3 LCP #4 Screw Holes 11.5mm OC Terminals N/A 24 2.2 1000 32400 109855 GU5.3 Ceramic #4 Screw Holes 11.5mm OC 140mm PTFE 25 8.1 1000 Terminals N/A 26 7 1000 GU5.3 GU10/GZ10 31000 108979 GU10/GZ10 LCP #4 Screw Holes 18mm OC R7s 30543 109450 R7s Al #4 Screw Holes 28mm OC 350mm PTFE 27 16.7 1000 30550 100720 R7s Al #4 Screw Holes 28mm OC 350mm PTFE 27 16.7 1000 1000 30541 108756 R7s Al #4 Screw Holes 28mm OC 320mm PTFE 27 16.5 32300 100912 R7s Ceramic #8 Screw Holes 65mm OC 200mm PTFE 28 25 400 32310 400036 R7s Ceramic #8 Screw Holes 65mm OC 350mm PTFE 29 72 200 32310 107195 R7s Ceramic #8 Screw Holes 65mm OC 200mm PTFE 29 72 200 32320 400080 R7s Ceramic #8 Screw Holes 65mm OC 114mm PTFE 30 77 200 1 4 5 LAMPHOLDERS 2 6 3 7 PAGE 6-16 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Halogen Lampholders 9 HALOGEN 14 10 15 11 16 12 17 LAMPHOLDERS 13 18 19 PAGE 6-17 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Halogen Lampholders HALOGEN 20 26 21 22 27 23 28 LAMPHOLDERS 24 29 25 30 PAGE 6-18 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) 2G7, 2GX7, 2G8, 2G10, 2G11, G(X)24, G(X)24 Rotary Lock Lampholders Type Reference Number Lamp Type Material Mounting 35613 500574 2G7 PBT 35610 109235 2G7 35611 109238 35612 109240 CFL Lead Orientation Misc Drawing Weight Unit Pcs. 10 x 20 Snap-In Horizontal - 1 18 500 PBT 10 x 20 Snap-In / #4 Screw Holes Horizontal - 2 15 500 2G7 PBT #8 Screw Holes 24mm OC Horizontal - 3 17 500 2G7 PBT #4 Screw Holes for Rear Mount Horizontal - 4 14 500 2G7 2GX7 35613 500575 2GX7 PBT 10 x 20 Snap-In Horizontal - 1 17 500 35620 109237 2GX7 PBT 10 x 20 Snap-In / #4 Screw Holes Horizontal - 2 15 500 35621 109239 2GX7 PBT #8 Screw Holes 24mm OC Horizontal - 3 17 500 35622 109241 2GX7 PBT #4 Screw Holes for Rear Mount Horizontal - 4 14 500 59000 526755 2G8 PBT #4 Screw Holes - - 5 19.6 250 Horizontal - 6 25.5 250 2G8 2G10 36300 101521 2G10 PBT #4 Screw Holes 24mm OC 2G11 36051 101489 2G11 PBT Lateral Pivot Brackets Horizontal - 7 14 500 36051 532687 2G11 PBT Lateral Pivot Brackets Horizontal Shunted 7 14 500 500 36050 101485 2G11 PBT Lateral #8 Screw Holes 24mm OC Horizontal - 8 14 36050 532685 2G11 PBT Lateral #8 Screw Holes 24mm OC Horizontal Shunted 8 14 500 36052 101491 2G11 PBT 13.3 x 25.5 Snap-In Vertical - 9 14 500 36052 532689 2G11 PBT 13.3 x 25.5 Snap-In Vertical Shunted 9 14 500 36053 101493 2G11 PBT 13.3 x 25.5 Snap-In Horizontal - 10 14 500 36053 532691 2G11 PBT 13.3 x 25.5 Snap-In Horizontal Shunted 10 14 500 G(X)24 71211 527560 G(X)24q-1 PBT 4X #4 Screw Holes 20.6mm OC Vertical 10/13W 11 12.9 500 71212 527561 G(X)24q-2 PBT 4X #4 Screw Holes 20.6mm OC Vertical 18W 11 12.9 500 71219 527566 G(X)24q-3/4 PBT 4X #4 Screw Holes 20.6mm OC Vertical 26/32/42W 11 12.9 500 71215 527564 G(X)24q-5 PBT 4X #4 Screw Holes 20.6mm OC Vertical 57W 11 13.5 500 500 527565 G(X)24q-6 PBT 4X #4 Screw Holes 20.6mm OC Vertical 70W 11 13.5 528120 G(X)24q-1 PBT 4.5mm W Split pins spaced 34.5mm Vertical 10/13W 12 11.9 500 72112 528121 G(X)24q-2 PBT 4.5mm W Split pins spaced 34.5mm Vertical 18W 12 11.9 500 72119 528126 G(X)24q-3/4 PBT 4.5mm W Split pins spaced 34.5mm Vertical 26/32/42W 12 11.9 500 72115 528124 G(X)24q-5 PBT 4.5mm W Split pins spaced 34.5mm Vertical 57W 12 12.5 500 500 72116 528125 G(X)24q-6 PBT 4.5mm W Split pins spaced 34.5mm Vertical 70W 12 12.5 71311 527589 G(X)24q-1 PBT 10x20 snap-in Foot Horizontal 10/13W 13 12 500 71312 527590 G(X)24q-2 PBT 10x20 snap-in Foot Horizontal 18W 13 12 500 71319 527596 G(X)24q-3/4 PBT 10x20 snap-in Foot Horizontal 26/32/42W 13 12 500 71315 527594 G(X)24q-5 PBT 10x20 snap-in Foot Horizontal 57W 13 12.6 500 500 71316 527595 G(X)24q-6 PBT 10x20 snap-in Foot Horizontal 70W 13 12.6 71711 527794 G(X)24q-1 PBT #8 Screw Holes 24mm OC Horizontal 10/13W 14 15.2 500 71712 527795 G(X)24q-2 PBT #8 Screw Holes 24mm OC Horizontal 18W 14 15.2 500 71719 527800 G(X)24q-3/4 PBT #8 Screw Holes 24mm OC Horizontal 26/32/42W 14 15.2 500 71715 527798 G(X)24q-5 PBT #8 Screw Holes 24mm OC Horizontal 57W 14 15.8 500 71716 527799 G(X)24q-6 PBT #8 Screw Holes 24mm OC Horizontal 70W 14 15.8 500 G(X)24 Rotary Lock 45940 507993 G(X)24q-2 PBT #4 Screw Holes 28.8mm OC Vertical 18W 15 20.2 500 45960 507994 G(X)24q-3 PBT #4 Screw Holes 28.8mm OC Vertical 26/32W 15 20.2 500 45930 507992 G(X)24q-3/4 PBT #4 Screw Holes 28.8mm OC Vertical 26/32/42W 15 20.2 500 45980 507995 G(X)24q-4 PBT #4 Screw Holes 28.8mm OC Vertical 42W 15 20.2 500 PAGE 6-19 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) LAMPHOLDERS 71216 72111 CFL Lampholders CFL 1 6 2 7 3 LAMPHOLDERS 8 4 9 5 PAGE 6-20 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) CFL Lampholders 10 CFL 13 14 11 12 15 LAMPHOLDERS PAGE 6-21 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Sign Illuminating Ballasts A Complete Range Of Solutions… From The Name You Trust Universal Lighting Technologies (“Universal”) is known throughout the sign business as a company that can set and meet today’s toughest industry standards. Our high-output ballasts are great for rugged outdoor sign cabinet applications because they provide ultra-reliable, low-temperature starting as low as -20° F. All Universal sign ballasts offer Class P thermal protection. • Signa® Electronic Sign ballasts are ideal for new sign installations with minimum wire connections, universal input voltage, parallel lamp operation, and maximum energy savings. • Signa® Electronic Sign ballasts, when paired with our wiring blocks, offer the perfect solution for magnetic to electronic sign cabinet retrofits. Universal offers the convenience of one-stop shopping for not just sign ballasts, but compact fluorescent, linear fluorescent, HID, and all your other ballast needs. For the unmistakable sign of quality and reliability, turn to Universal. Universal Lighting Technologies is a member of the Panasonic Group Plastic Sign Ballasts Universal ® sign ballasts provide ultra-reliable low-temperature starting — plus Class P thermal protection. Application And Operating Information Heat Light Output vs. Temperature Ballasts generate heat during normal operation. By design, fluorescent ballasts should operate so that their maximum hot-spot case temperature does not exceed 80°C (176°F). Operating at higher temperatures will shorten ballast life or may cause the thermal protection cicuit to trip. The temperature the ballast reaches depends on the temperature of the area surrounding it — plus the heat-conducting surface touching the ballast. Ballasts should be installed in a manner that avoids future overheating. To maintain normal ballast temperature, you should: The light output of a fluorescent lamp varies according to the mercury vapor pressure inside the lamp. This pressure is controlled by the coldest spot on the bulb wall. The ballast may start the lamp, but the light output can be very low if the bulb wall temperature is low. Several factors influence this, including ambient temperatures, wind, type of enclosure, etc. If maximum light output is critical, consult a lamp manufacturer for advice. 1. Mount the ballast against a flat surface of heavy gauge metal such as the structural part of the sign. 2. Keep the ballast as far away as possible from other ballasts, lamps or reflective surfaces. (Lamps generate approximately three-fourths of the heat in a plastic sign.) The ends of the lamps are the hottest part, so you should mount the ballast as far away from the ends as possible. 3. Paint the inside of the sign with flat white paint. Moisture Protection 1. Vent the sign as well as possible without allowing water to enter. 2. Ballasts should be mounted horizontally (except for weatherproof types). If the ballast must be mounted vertically, allow room for sufficient air circulation.Wherever possible, mount the ballast in an enclosure outside the sign by using Universal pup tents. You can get pup tents when you order the plastic sign ballast. Your wholesaler will also have a supply for your convenience. Grounding Plastic Sign Ballasts The white lead of a ballast must be connected to the neutral or ground side of the power supply. All metal parts of the sign, as well as the ballast case, must be grounded either through the conduit which holds the power supply or by direct connection with a grounding wire. An ungrounded sign is a potential hazard—and it can give misleading symptoms when looking for sign faults. Lamp Starting Problems Occasionally a field problem will arise involving improper lamp starting. The usual complaint is that the lamps start slowly (or not at all). Here are some of the causes: 1. Low line voltage 2. Improper sign grounding 3. Insufficient or no open circuit voltage 4. Dirty lamps during high-humidity operating conditions 5. Lamps improperly inserted in the sockets If lamp starting is a problem in your installation, check the sign grounding and open circuit voltage. If both are normal, the probable cause is dirty lamps. The lamps should be washed in clean water, drip-dried, and reinstalled. If this doesn’t solve the problem, contact your nearest Universal representative for further assistance. Short Lamp Life If the lamp has not given proper length of service as specified by the lamp manufacturer, the following reasons for early failure should be considered: 1. Frequent starting and short operating periods 2. Improper ballast 3. Improper voltage supply 4. Faulty wiring 5. Defective lamps 6. Lamps improperly inserted in sockets Early lamp failure will be preceded by a dense blackening on either or both ends of the lamps. This blackening will extend three or four inches from the lamp base and should not be confused with a small dense spot, which is a mercury deposit that can occur any time during lamp life. Dense blackening due to early lamp failure should not be confused with the gray bands that sometimes appear toward the end of normal lamp life (about two inches from either end of the lamp). PAGE 7-2 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Sign Ballast Footage Chart ELECTRONIC SIGN BALLASTS No. of Lamps Per Ballasts T12HO Lamps T8HO Lamps TOTAL FOOTAGE FOR T12HO & T8HO LAMPS 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 ESB-216-12 (Up to 8’ Lamps) 1-2 ESB-216-12 (Up to 6’ Lamps) ESB-432-14 (Up to 8’ Lamps) 1-4 ESB-432-14 (Up to 6’ Lamps) ESB-848-46 (Up to 8’ Lamps) 4-6 ESB-848-46 (Up to 6’ Lamps) ESB-1040-14 (Up to 10’ Lamps) 1-4 ESB-1040-14 (Up to 8’ Lamps) PLASTIC SIGN BALLAST LEAD LENGTHS (INCHES) CATALOG NUMBER WHITE BLACK BLUES REDS SIGNA ELECTRONIC SIGN BALLASTS - T8 & T12 HIGH OUTPUT LAMPS - 108-35 Volts - 50-60 Hz SIX LAMP BALLASTS ESB216-12 24 24 120 120 ESB432-14 24 24 120 120 ESB848-46 24 24 120 120 ESB1040-46 24 24 120 120 Note: Maximum volts above ground, any lead 590 volts. Plastic Sign Ballasts PAGE 7-3 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) ELECTRONIC SIGN BALLASTS SIGNA® ELECTRONIC SIGN BALLASTS • Instant start for maximum energy savings • Simplified wiring for fewer connections • Universal input voltage • Parallel Lamp Operation PLASTIC SIGN BALLAST LEAD LENGTHS (INCHES) TOTAL LAMP FOOTAGE CATALOG NUMBER START TEMP (ºF) INPUT VOLTAGE MAX. INPUT VOLTAGE MAX. LINE CURRENT (A) WIRING DIAGRAM DIMENSION CHART REF. WEIGHT (LBS.) 1 1 4.2 2 2 7.4 3 3 9.7 2 3 10 T12HO UP TO 8’ IN LENGTH OR T8HO UP TO 6’ IN LENGTH - 120 to 277 Volts - 50/60 Hz ONE TO TWO LAMP BALLASTS ESB216-12 2’ min. – 16’ max. –20 120 134 1.12 277 130 0.47 ONE, TWO, THREE OR FOUR LAMP BALLASTS ESB432-14 4’ min. – 32’ max. –20 120 280 2.34 277 274 0.99 FOUR, FIVE OR SIX LAMP BALLASTS ESB848-46 8’ min. – 48’ max. –20 120 408 3.41 277 395 1.47 T12HO UP TO 10’ IN LENGTH OR T8HO UP TO 8’ IN LENGTH - 120 to 277 Volts - 50/60 Hz ONE, TWO, THREE OR FOUR LAMP BALLASTS ESB1040-14 10’ min. – 40’ max. –20 120 341 2.85 277 331 1.25 Consult www.signasign.com for complete specification information Diagram 2 Diagram 1 Diagram 3 ELECTRONIC SIGN BALLASTS DIMENSION CHART - STANDARD CASE (INCHES) Ref. # 1 2 3 A B C D E 10 37/64 ˝ 1145/64˝ 119/64˝ 13/4˝ 3 3/16˝ 133/16˝ 14 5/16˝ 13 3/4˝ 2 43/64˝ 3 3/16˝ 15 9/16˝ 16 11/16˝ 161/8˝ 2 43/64˝ 3 3/16˝ Diagrams Notes: When Operating less than the maximum number of lamps, insulate unused blue leads. SIGNA WIRE BLOCK Electronic Sign Ballasts For use converting magnetic ballast installations to electronic systems. CATALOG NUMBER MAGNETIC BALLASTS NUMBER OF LAMPS OPERATED FOR USE WITH: WB66 6 Lamps 6 Lamps ESB848-46 WB65 6 Lamps 5 Lamps ESB848-46 WIDTH 3.00 in (76.2 mm) WB64 6 Lamps 4 Lamps ESB848-46 HEIGHT 0.75 in (19.05 mm) WB44 4 Lamps 4 Lamps ESB432-14 / ESB1040-14 WEIGHT 0.06 lbs. PHYSICAL PROPERTIES LENGTH 6.00 in (152.4 mm) WBEXT – 24” wiring harness for extending magnetic ballast leads. PAGE 7-4 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Notes Plastic Sign Ballasts PAGE 7-5 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Glossary ANSI (American National Standards Institute): Non-profit organization that generates voluntary product performance standards for many U.S. industries. ANSI Standard C82.11 applies to high frequency fluorescent lamp ballasts. Harmonic: An integral multiple of the fundamental frequency (60 Hz) that becomes a component of the current (see “Harmonic Distortion”). Arc: Intense luminous discharge formed by the passage of electric current across a space between electrodes. Harmonic Distortion: Distortion of an AC waveform caused by multiples of the fundamental frequency (harmonics). Odd triplet harmonics (thirds, ninths, etc.) may result in large currents on the neutral line in a four-wire Wye three-phase system. Auto Reset Shutdown Circuit: Circuit senses lamp end of life and will automatically shut off power to the lamp(s). When a new lamp is inserted in the socket, the ballast resets, and turns on the lamp automatically. High Efficiency (Energy Saving) Electromagnetic Ballast: Ballast with Core & Coils, designed to minimize ballast losses compared to the “standard” ballast. Ballast Efficacy Factor (BEF): Value used to evaluate various lighting systems based on light output and power input. The BEF can only be used to compare systems operating the same type and quantity of lamps. High Intensity Discharge (HID) Lamp: A lamp containing a filled arc tube in which the active element becomes vaporized (a gaseous state) and is discharged into the arc stream to produce light. Ballast Factor (BF): Measure of light output from lamp operated by commercial ballast as compared to a laboratory standard reference ballast. Ballast factor .94 means ballast produces 94% of light produced by ANSI C82.2 reference ballast operating same lamps. High Power Factor: A ballast whose power factor is corrected to 90% or greater. Ballast Luminous Efficiency (BLE): New ballast efficiency metric introduced by DOE. Equal to the ratio of total lamp arc power to ballast input power. Incandescent Lamp: Lamp in which light is produced by a filament heated by an electric current. Input Voltage: Power supply voltage required for proper operation of an arc discharge lighting ballast. Canadian Energy Standards: Indicates ballast complies with Canadian Energy Standards and meets the requirements of CAN/CSA-C654-M91. Instant Start (IS): Lamp starting method in which lamps are started by high voltage input with no preheating of lamp filaments. Some rapid start lamps are designed so that they may be instant started. Canadian Standards Association (CSA): Association that generates product performance and safety standards for many Canadian industries. LED: Light Emitting Diode (LED) is a diode that produces light when the electrical current flows through it. Circle E: Designates a ballast meets or exceeds the E requirements of Public Law 100-357 establishing standards of efficiency. Constant Current LED System: System where the driver provides a constant output current and the modules are designed for that current rating or higher. Modules are constant current rated and have no current limiting. Constant Voltage LED System: System where the driver provides a constant voltage output and the modules incorporate an integral current control device to regulate the LED current within the module. Drivers and modules must both have the same constant voltage rating and power loading must be compatible. Efficacy: Lumen output per unit of power supplied to ballast (lumens per watt). EMI (Electromagnetic Interference): Electrical interference (noise) generated by electrical and electronic devices. Levels generated by high frequency electronic devices are subject to regulation by Federal Communications Commission (FCC). Filament Voltage: Voltage applied to the lamp cathode. Foot Candles: Measure of light level on a surface being illuminated. Defined as one lumen of light per one square foot of surface area. LED Module: A single component that includes LEDs, electrical connections, mounting plate/housing, optical interface, environmental protection, thermal interface and heat sinking. Lumens/Watt: A measurement of white light produced by each output watt. Parallel Lamp Operation: Refers to ballasts that employ multipleoutput current paths independent of one another, allowing other lamps operated by the ballast to remain lit should companion lamp(s) fail. Programmed Rapid Start (also Programmed Start): lamp starting method which preheats the lamp filaments while not allowing the lamp to ignite and then applies the open circuit voltage (OCV) to start the lamp. This type of starting circuit keeps lamp end blackening to a minimum and improves lamp life performance, especially in applications where the lamps are frequently switched on and off. Rapid Start (RS): Lamp starting method in which lamp filaments are heated while open circuit voltage (OCV) is applied to facilitate lamp ignition. Series Lamp Operation: Refers to ballasts that employ a single current path passing through all lamps operated by the ballast. If one lamp should fail, companion lamps operated by the same ballasts will also extinguish or dim. FOR MORE INFORMATION CALL PAGE 8-1 1-800-BALLAST (225-5278) Glossary Crest Factor (Lamp Current Crest Factor): Ratio of peak lamp current to RMS or average lamp operating current. LED Driver: Similar to the function of a fluorescent ballast. It regulates output voltage or current for the LED module. Glossary Trigger Start: A term used for electromagnetic ballasts which operate pre-heat start lamps in a rapid start manner. They supply higher filament voltages to heat the electrodes to start the pre-heat lamps, to simulate the rapid start system. A grounded reflector close to the lamp, together with a grounded line circuit, is required to provide a capacitive starting aid effect between lamps and fixture and assist ionization in the starting process. UL (Underwriters’ Laboratories, Inc.): Laboratory that sets safety standards for building materials, electrical appliances and other products. Glossary Watts: Measurement of electrical ability to do work FOR MORE INFORMATION CALL PAGE 8-2 1-800-BALLAST (225-5278) Index Catalog Page # Catalog Page # 100305 6-9 109459 6-12 100310 100720 100732 100912 100928 100946 101035 101248 101485 101489 101491 101493 101521 102597 102927 102929 106457 107065 107195 107652 107677 107694 108257 108756 108851 108869 108870 108891 108892 108893 108913 108925 108979 109014 109235 109237 109239 109240 109241 109272 109342 109343 109376 109377 109450 6-11 6-16 6-11 6-15 6-15 6-16 6-19 6-19 6-19 6-19 6-19 6-12 6-15 6-15 6-16 6-11 6-16 6-11 6-11 6-15 6-11 6-16 6-12 6-12 6-12 6-12 6-15 6-11 6-11 6-15 6-16 6-12 6-19 6-19 6-19 6-19 6-19 6-19 6-12 6-6 6-6 6-6 6-6 6-16 109460 109518 109547 109851 109852 109852 109853 109855 109856 11102-45SC-TC 1110-246C-TC 1110-247SC-TC 1110-564C-TC 1110-566C-TC 1110-568C-TC 1111-246C-TC 1111-247SC-TC 1120-251A-TC 11210-236C-TC 11210-239C-TC 11210-242C-TC 11210-277C-TC 11210-490C-TC 11210-506C-TC 11210-539C-TC 11210-554C-TC 11210-606C-TC 12210-236C-TC 12210-237C-TC 12210-239C-TC 12210-241C-TC 12210-261C-TC 12210-261RC-TC 12210-552C-TC 12210-602C-TC 12210-606C-TC 123310W 1233142W 1233154W 1233251W 123335W 188156 188157 188164 188165 188166 6-12 6-12 6-16 6-15 6-15 6-15 6-15 6-15, 6-16 6-15 4-35 4-35 4-35 4-35 4-35 4-35 4-35 4-35 4-35 4-35 4-35 4-35 4-35 4-35 4-35 4-35 4-35 4-35 4-36 4-36 4-36 4-36 4-36 4-36 4-36 4-36 4-36 4-27 Index 109238 6-9 6-16 4-27 4-28 4-27 4-27 5-3 5-3 5-3 5-3 5-3 FOR MORE INFORMATION CALL PAGE 9-1 1-800-BALLAST (225-5278) Index Catalog Page # Catalog Page # 188167 5-3 400036 6-16 188168 188169 188246 188301 188302 188514 188574 188610 188611 188612 188613 188629 188630 188631 188632 188633 188634 188635 188638 188639 188649 188650 188651 188652 188671 188754 188756 188757 188758 188776 188777 188841 188882 188883 Index 188884 188885 188895 188896 188897 188901 188902 188903 188939 188940 188941 188989 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 400080 404681 500574 500575 501981 501982 502004 502394 504262 504542 505732 505733 505734 505735 505736 505737 505739 505745 505746 505747 505750 505751 506216 506381 507656 507992 507993 507994 507995 508306 508314 508590 508610 508611 509035 509069 509134 509135 509136 509137 509180 509213 509356 509357 520728 525523 6-16 6-7 6-19 6-19 6-12 6-12 6-15 6-11 6-12 6-15, 6-16 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-11 6-12 6-11 6-19 6-19 6-19 6-19 6-15 6-19 6-9 6-15 6-15 6-15 6-15 6-6 6-6 6-6 6-6 6-6 6-11 6-11 6-15 6-15 6-12 FOR MORE INFORMATION CALL PAGE 9-2 1-800-BALLAST (225-5278) Index Catalog Page # Catalog Page # 525681 6-15 536284 6-5 525681 525750 525857 525857 526018 526211 526246 526251 526755 527560 527561 527564 527565 527566 527589 527590 527594 527595 527596 527794 527795 527798 527799 527800 528120 528121 528124 528125 528126 529699 529773 529773 530250 532685 532687 532689 534050 534101 534102 534105 534132 534218 534219 534636 535782 6-15 6-15 6-11 6-11 6-11 6-11 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-19 6-15 6-11 6-11 6-15 6-19 6-19 6-19 6-19 6-11 6-11 6-11 6-11 6-15 6-11 6-11 6-11 6-11 536293 536294 536297 536298 536300 536301 536303 536304 536306 536307 536309 536310 536312 536313 536315 536316 536320 536322 536325 536328 536329 536330 536336 536337 536338 536344 536346 536347 536348 536349 536350 536368 536369 536370 536372 536373 536469 536822 536856 536857 536857 537049 537057 537132 537138 537141 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-5 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 Index 532691 6-15 6-11 6-11 6-16 6-15 6-15 6-11 6-11 6-5 6-5 6-5 FOR MORE INFORMATION CALL PAGE 9-3 1-800-BALLAST (225-5278) Index Catalog Page # Catalog Page # 537147 6-5 005-1418-BH 4-4 537150 537155 537165 537166 537173 537174 537175 537181 537182 537183 537205 537206 537207 537454 537784 538286 538630 538634 542157 542304 543153 543963 545840 545842 545845 545849 545858 545862 545894 545896 545933 545935 545937 545939 Index 547807 547808 001-2009 005-1184-BH 005-1185-BH 005-1401-BH 005-1410-BH 005-1411-BH 005-1413-BH 005-1414-BH 005-1415-BH 005-1417-BH 6-5 6-5 6-5, 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-7 6-11 6-11 6-15 6-11 6-11 6-11 6-11 6-11 6-11 6-6 6-6 6-6 6-6 6-6 6-6 6-9 6-9 6-9 6-9 6-9 6-9 6-11 6-11 4-37 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 005-1421-BH 005-1422-BH 005-1464-BH 005-1466-BH 005-1467-BH 005-1468-BH 005-1474-BH 005-1475-BH 005-1495-BH 005-1561-BH 005-1594-BH 005-1799-BH 005-1884-BH 005-1886-BH 005-1887-BH 005-1888-BH 005-1893-BH 005-2167-BH 005-2351-BH 005-2669-BH 005-2776-BH 005-2779-BH 005-2793-BH 005-3160-BH 005-3278-BH 493B2 B114PUNV70-D B114PUNVDV3-D B114PUNVSV3-D B128PUNV50-D B128PUNV60-D B128PUNV70-D B128PUNVDV3-D B128PUNVSV3-D B132I347HP B132IUNVHE-N B132IUNVHP-N B132PUNVDV3-A B132PUNVSV3-A B132R347V5 B135PUNV70-D B135PUNVDV3-D B135PUNVSV3-D B214PU115S50A B214PUNVDV3-D B214PUNVSV3-D 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 1-46 1-36 2-16 2-17 1-36, 1-37 1-36, 1-37 1-36, 1-37 2-16 2-17 1-13, 1-15, 1-19 1-13, 1-15, 1-17, 1-19, 1-24, 1-26, 1-29, 1-32 1-13, 1-15, 1-19, 1-24, 1-26, 1-29, 1-32 2-16 2-17 2-18 1-37 2-16 2-17 2-20 2-16 2-17 FOR MORE INFORMATION CALL PAGE 9-4 1-800-BALLAST (225-5278) Index Catalog Page # Catalog Page # B224PUNV-C 1-38, 3-16, 3-17 B232SR277S30 2-19 B228P3DV3PLA B228P3DV3PLD B228P3SV3PLA B228PU115S50D B228PU95S50D B228PUDV3PLA B228PUDV3PLD B228PUNV-C B228PUNV-N B228PUNV115-D B228PUNV85-D B228PUNV90-C B228PUNV95-D B228PUNVDV3-D B228PUNVSV3-D B228PUSV3PLA B232I120RES-A B232I120RES-G B232I347HP-A B232I347HPL B232IUNV-C B232IUNV104-A B232IUNVEL-N B232IUNVHEH-A 2-17 B232SR347V5 2-17 B234SR120M-A 2-23 B234SR277M-A 2-20 B239PUNV-D 2-20 B240R220-A 2-17 B254P347-D 2-17 B254P3DV3PLD 1-36, 1-37 B254P3SV3PLD 1-36, 1-37 B254PHRVHB-E 1-9, 1-36, 1-37 B254PUDV3PLD 1-9, 1-36, 1-37 B254PUNV-D 1-9, 1-36, 1-37 B254PUNVHB-D 1-36, 1-37 B254PUNVPL-A 2-16 B254PUNVPLHBA 2-17 B254PUSV3PLD 2-23 B259I347HP 1-13, 1-15, 1-19, 1-20 B259IUNVEL-A 1-13, 1-15, 1-19, 1-20 B259IUNVHE-A 1-13, 1-15, 1-19, 1-20, 1-24, 1-29, 1-32 B259IUNVHP-A 1-13, 1-15, 1-19, 1-20, 1-32 B260I120M-A 1-13, 1-15, 1-19, 1-20, 1-32, 1-42 B260IUNVHP 1-13, 1-15, 1-26, 1-29 1-13, 1-15, 1-19, 1-20, 1-24, 1-26, 1-29 B286PUNVHE-S B295PUNVHE-S B232P3DV3PLD 2-17 B332IUNVEL-A B232P3S50PLA 2-26, 2-27 B332IUNVHE-A B232P3S50PLHA 2-25 B332IUNVHP-A B232P3SV3PLA 2-22 B332PUNVEL-A B232PUDV3PLA 2-17 B332PUNVHE-A B232PUDV3PLD 2-17 B332PUNVHEH-A B232PUNVDV3-A 2-16 1-8, 1-14, 1-15, 1-19, 1-21, 1-24, 1-25, 1-26, 1-27, 1-29, 1-30, 1-32 1-8, 1-14, 1-15, 1-19, 1-21, 1-24, 1-25, 1-26, 1-27, 1-29, 1-30, 1-32 1-8, 1-14, 1-15, 1-19, 1-21, 1-24, 1-25, 1-26, 1-27, 1-29, 1-30 2-26, 2-27 B232IUNVHP-N B232PUNVEL-B B232PUNVHE-B B232PUNVHEH-A B232PUS50PLA B232PUS50PLHA 2-25 1-42, 1-43 1-38, 3-17 1-43 1-38, 3-18, 3-19 2-17 2-24 1-38, 3-18, 3-19 2-17 1-38, 1-39, 1-40, 3-15, 3-17, 3-18, 3-19 1-38, 1-39, 1-40, 3-15, 3-17, 3-18, 3-19 1-38, 1-39, 1-40, 1-41, 3-15, 3-17, 3-18, 3-19 1-38, 1-39, 1-40, 1-41, 3-15, 3-17, 3-18, 3-19 2-24 1-32, 1-34 1-34 1-34 1-34 1-44, 1-45 1-44, 1-45 1-35 1-46 B332I347HP 1-14, 1-16, 1-20, 1-21, 1-32, 3-17 B332I347HPL 1-14, 1-16, 1-20, 1-21, 1-32 B332IHRVHB-E B332SR120S30 1-20, 1-21, 1-24, 1-25, 1-26, 1-27, 1-29, 1-30 1-14, 1-16, 1-20, 1-21, 1-24, 1-25, 1-26, 1-27, 1-29, 1-30, 1-32 1-14, 1-16, 1-20, 1-21, 1-24, 1-25, 1-26, 1-27, 1-29, 1-30, 1-32 1-14, 1-16, 1-20, 1-21, 1-24, 1-25, 1-26, 1-27, 1-29, 1-30, 1-32, 1-42 1-8, 1-14, 1-16, 1-21, 1-22, 1-25, 1-27, 1-28, 1-30, 1-32 1-8, 1-14, 1-15, 1-16, 1-21, 1-22, 1-25, 1-27, 1-28, 1-30 1-8, 1-14, 1-15, 1-16, 1-21, 1-22, 1-25, 1-27, 1-28, 1-30 2-19 B332SR120V5 2-18 B332SR277S30 2-19 B332SR277V5 2-18 B432I120RES-A 1-14, 1-16, 1-17, 1-21, 1-22 B432I347HP B232PUSV3PLA 2-22 B432I347HPL B232SR120S30 2-19 B432IUNVEL-A 1-14, 1-17, 1-21, 1-22, 1-33 1-14, 1-17, 1-21, 1-22, 1-33 1-14, 1-17, 1-21, 1-22, 1-25, 1-26, 1-30, 1-31, 1-33 FOR MORE INFORMATION CALL PAGE 9-5 1-800-BALLAST (225-5278) Index B232P3DV3PLA 1-13, 1-15, 1-19, 1-20, 1-24, 1-26, 1-29 1-13, 1-15, 1-17, 1-19, 1-20, 1-24, 1-26, 1-29, 1-32 2-17 2-18 1-42, 1-43 Index Catalog B432IUNVHE-A B432IUNVHP-A B432PUNVEL-A B432PUNVHE-A B432PUNVHEH-E B432SR277V5 B454PUNV-E B454PUNVHB-E B454PUNVPL-E B454PUNVPLHBE C140PUNVDV3 C213/347ME C213UNVDV3ME C213UNVME C213UNVSV3ME C218/347ME C218UNVDV3ME C218UNVME C218UNVSV3ME C226UNVDV3ME C226UNVSV3ME C232PUNVDV3 C240PUNVDV3 C240PUNVHP-B C240SI120RH C240SI277RH C242/347ME C242PUNVDV3 C2642/347ME C2642UNVME C340SI120RH C340SI277RH CF1320H2P Index CT213UNVME CT218UNVME ES1329A ES1510A ES1786X ESB1040-14 ESB216-12 ESB432-14 ESB848-46 HPS10004B HPS10005A HPS1503A Page # 1-14, 1-17, 1-21, 1-22, 1-25, 1-26, 1-27, 1-28, 1-30, 1-31, 1-33 1-14, 1-17, 1-21, 1-22, 1-25, 1-26, 1-27, 1-28, 1-30, 1-31, 1-33, 1-42 1-8, 1-14, 1-17, 1-22, 1-25, 1-26, 1-28, 1-30, 1-31, 1-33 1-8, 1-14, 1-16, 1-17, 1-22, 1-25, 1-26, 1-28, 1-30, 1-31 2-18 1-38, 1-39, 3-18, 3-19 1-38, 1-39, 3-18, 3-19 1-38, 1-39, 1-40, 1-41, 3-18, 3-19 1-38, 1-39, 1-40, 1-41, 3-18, 3-19 2-16 3-2, 3-9, 3-12 2-16 3-2, 3-7, 3-9, 3-12 2-17 3-2, 3-9, 3-12 2-16 3-2 2-17 2-16 2-17 2-16 2-16 3-7, 3-17 3-17 3-17 3-9, 3-10, 3-13, 3-15, 3-16, 3-18 2-16 3-2, 3-9, 3-10, 3-13, 3-15, 3-16 3-2 3-17 3-17 3-9 3-9 3-16 1-15, 1-21 1-13, 1-15, 1-19 1-47 7-4 7-3, 7-4 7-3, 7-4 7-3, 7-4 4-25, 4-30, 4-33, 4-38, 4-39 4-38, 4-39 4-27, 4-33, 4-38, 4-39 Catalog Page # HPS15045B 4-38, 4-39 HPS1504A 4-38, 4-39 HPS1505A 4-38, 4-39 HPS1505B 4-38, 4-39 HPS150G01W 4-38, 4-39 HPS4003A HPS40045B HPS4004A HPS400G05W HPS4501B HPS4601B HPS6001B M1000120AC5M M1000230AC5M M100048TAC5M M1000ML5AC5M M1000MLTAC5M M1000TRIAC5M M10048TLC3M M100MLTLC30 M100MLTLC3D M100TRILC3M M1500230AC5M M150048TAC5M M1500MLTAC5M M1500TRIAC5M M150277RCEM M15048TLC3M M150MLTAC3M M150MLTLC3D M150MLTLC3M M150TRILC3M M175230AC3M M17548TAC3M M175ML5AC3M M175MLTAC3M M175TRIAC30 M250230AC3M M25048TAC3M M250ML5AC3M M250ML5AC4M M250MLTAC3M M250MLTAC4M M250TRIAC3M M250TRIAC4M 4-28, 4-29, 4-33, 4-38, 4-39 4-38, 4-39 4-38, 4-39 4-38, 4-39 4-38, 4-39 4-38, 4-39 4-30, 4-38, 4-39 4-18 4-33 4-12, 4-18 4-12, 4-18 4-12, 4-18 4-15, 4-18 4-13, 4-20 4-20 4-13, 4-20 4-15, 4-20 4-33, 4-34 4-12, 4-18 4-12, 4-18 4-15, 4-18 4-21 4-13, 4-21 4-13, 4-21 4-13, 4-21 4-13, 4-21 4-15, 4-21 4-33 4-12, 4-16 4-12, 4-16 4-12, 4-16 4-15, 4-16 4-33 4-12, 4-16 4-12, 4-16 4-12, 4-17 4-12, 4-16 4-12, 4-17 4-15, 4-16 4-15, 4-17 FOR MORE INFORMATION CALL PAGE 9-6 1-800-BALLAST (225-5278) Index Catalog Page # Catalog Page # M35MLTLC3M 4-13, 4-20 P400ML5AC4M 4-24 M35TRILC3M M400120AC4M M400230AC4M M40048TAC4M M400ML5AC4M M400MLTAC4M M400TRIAC40 M400TRIAC4M M50MLTLC3M M50TRILC3M M7048TLC3M M70MLTLC3D M70MLTLC3M M70TRILC3M P100048TAC5M P1000ML5AC5M P1000MLTAC5M P175277RCEM P17548TAC3L P175MLTAC4L P175TRIAC3M P20048TAC3L P200ML5AC3M P200MLTAC3L P200TRIAC3M P25048TAC4L P250ML5AC4L P250MLTAC4L P250TRIAC4M P320277RCEM P32048TAC4L P320ML5AC4L P320ML5AC4M P320MLTAC40 P320TRIAC4M P35048TAC4O P350ML5AC40 P350ML5AC4L P350ML5AC4M P350MLTAC40 P350MLTAC4M P350TRIAC4M P40048TAC4L P40048TAC4M P400ML5AC4L 4-33 4-12, 4-17 4-12, 4-17 4-12, 4-17 4-17 4-15 4-13, 4-20 4-15, 4-20 4-13, 4-20 4-13, 4-20 4-13, 4-20 4-15, 4-20 4-25 4-13, 4-25 4-13, 4-25 4-21 4-13, 4-21 4-13, 4-21 4-15, 4-21 4-13, 4-22 4-13, 4-22 4-13, 4-22 4-15, 4-22 4-13, 4-22 4-13, 4-22 4-13, 4-22 4-15, 4-22 4-22 4-13, 4-23 4-13, 4-23 4-13, 4-23 4-22 4-15, 4-22 4-23 4-13, 4-23 4-13, 4-23 4-13, 4-23 4-13 4-23 4-13, 4-23 4-15, 4-23 4-13, 4-24 4-24 4-13, 4-24 P400MLTAC4L P400TRIAC4M P45048TAC4L P450ML5AC4L P450MLTAC4L P75048TAC5M P750ML5AC5M P750MLTAC5M P750TRIAC5M P875MLTAC5M R17058501-BH R17058503-BH R17058507-BH R17058509-BH R17058511-BH R17058514-BH R17058515-BH R17058517-BH R17058519-BH R17058520-BH R17058522-BH R17058523-BH R17058529-BH R17058530-BH R17058532-BH R17058533-BH R17058535-BH R17058536-BH R17058543-BH R17058553-BH R17058554 R17058555-BH R17058557-BH R17058558-BH R17058560 R17058562-BH R17058563-BH R17058564 R17058565-BH R17058567-BH R17058569 R17058571-BH R17058574-BH S1000230AC5M S1000480AC5M S100048TAC5M 4-13, 4-24 4-15, 4-24 4-13, 4-25 4-13, 4-25 4-13, 4-25 4-13, 4-25 4-13, 4-25 4-13, 4-25 4-15, 4-25 4-13, 4-25 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 Index P35048TAC4L 4-15, 4-20 4-17 4-5 4-5 4-5 4-5 4-5 4-5 4-33 4-30 4-14, 4-30 FOR MORE INFORMATION CALL PAGE 9-7 1-800-BALLAST (225-5278) Index Catalog Page # S1000ML5AC5M 4-14, 4-30 S1000TRIAC5M 4-15, 4-30 S1000MLTAC5M S100120RCEM S10048TLC3M S100MLTLC3M S100TRILC3M S150120RCEM S15048TLC3M S150TRILC3M S20048TAC4M S200MLTAC4M S200TRIAC4M 4-14, 4-27 4-14, 4-27 4-15, 4-27 4-28 4-14, 4-28 4-15, 4-28 4-14, 4-28 4-14, 4-28 4-28 S25048TAC4M 4-14, 4-28 S250TRIAC4M S35120RCEM 4-33 4-14, 4-28 4-28 4-27 S400230AC4M 4-33 S40048TAC5M 4-14, 4-29 S40048TAC4M 4-14, 4-29 S400ML5AC4M 4-14, 4-29 S400MLTAC4M 4-14, 4-29 S400ML5AC5M S400MLTAC5M S400TRIAC4M S400TRIAC5M S430MLTAC4M S50120RCEM S50MLTLC3M S600MLTAC5M S70120RCEM S70230LC3M S7048TLC3M S70MLTLC3M Index 4-27 4-28 S250MLTAC4M S70TRILC3M Page # 4-14, 4-30 S250120AC4M S250230AC4M Catalog 4-14, 4-29 4-14, 4-29 4-15, 4-29 4-15, 4-29 4-29 4-27 4-14, 4-27 4-14, 4-30 4-27 4-33, 4-34 4-14, 4-27 4-14, 4-27 4-15, 4-27 FOR MORE INFORMATION CALL PAGE 9-8 1-800-BALLAST (225-5278) Universal Lighting Technologies Limited Warranty TM LIMITED WARRANTY. Universal Lighting Technologies, 51 Century Blvd., Suite 230, Nashville, TN 37214-3683, 1-800-BALLAST, (hereinafter called “Universal”) warrants to the purchaser and first end-user purchaser only, that its lighting products (hereinafter called “Lighting Products”) will be free from defects in material and workmanship for the specified warranty periods listed below (each hereinafter called a “Warranty Period”). If any Lighting Product does not meet the limited warranty provided in the preceding sentence and such defect is reported to Universal during the applicable Warranty Period, then the sole obligation of Universal, and the SOLE AND EXCLUSIVE REMEDY under this limited warranty, shall be limited to the replacement of such non-performing Lighting Product with, at Universal’s sole discretion, the same type of Lighting Product or a Lighting Product which is substantially similar thereto. Other than with respect to the duration of the Warranty Period for the items denoted below with a (“*”) or separately agreed to in a written agreement, if any term or condition of this limited warranty conflicts with any term or condition of contained on any other document, including but not limited to Universal’s Terms and Conditions of Sale or any product specification sheet, Application and Performance Data Sheet or similar document for any Lighting Product (collectively “Product Specification Sheet”), the terms and conditions of this limited warranty shall control. WARRANTY PERIODS. All Warranty Periods are measured beginning from the date of manufacture. Lighting Products not falling within one of the below listed categories shall have a Warranty Period of 12 months. The applicable Warranty Period for the type of Lighting Products listed below are as follows: TRIAD Electronic Fluorescent Ballasts up to 60 Months* Universal, Energy Saving Electromagnetic Fluorescent Ballasts 36 Months AddressPro, and DaliPro Ballasts 36 Months SuperDim, LevelPro & VariPro 60 Months Standard Universal Electromagnetic, Fluorescent & H.I.D. Ballasts 24 Months Universal Sign Ballasts 24 Months MAX-3 Series Sign Ballasts 36 Months 36 Months Basic-12 and Homestar Electronic Ballasts VS Lampholders 36 Months VS Brand Magnetic IEC, Electronic IEC, Ignitors, Switches and Capacitors 36 Months Electronic HID up to 60 Months* LED Drivers up to 60 Months* LED Modules 36 Months** * With respect to the items denoted above with a (“*”), the duration of the Warranty Period will vary depending on the specific Lighting Product. The exact Warranty Period for the items denoted with (“*”) shall be provided on the Product Specification Sheet, for such Lighting Product. ** COVERED DEFECTS FOR LED MODULES. For purposes of this limited warranty, a defect in a LED Module shall be defined as one or more individual LEDs dark at initial installation or > greater than 10% of individual LEDs dark during the Warranty Period. The Warranty Periods are based on 4000hrs/yr operation of the LED Lighting Products in normal operating conditions in compliance with the written specifications of Universal. Replacement and/or repair of individual LED Modules does not extend this limited warranty beyond the original Warranty Period. EXCLUSIONS; TESTING. This limited warranty is conditional and excludes (i) Lighting Products which have been abused, altered, improperly or insufficiently maintained, or improperly operated, (ii) normal wear and tear or normal usage, (iii) any Lighting Product not installed and operated in accordance with the National Electric Code (NEC), the Standards for Safety of Underwriters Laboratories, Inc. (UL), Standards for the American National Standards Institute (ANSI), in Canada, the Canadian Standards Association (CSA), or the International Electrotechnical Commission (IEC). This limited warranty is not applicable to and excludes any Lighting Product which has not been installed and operated in accordance with Universal’s specifications and connection diagrams or Lighting Products which have been submitted to abnormal operating conditions. This includes, but is not limited to, excessive temperatures as specified in Universal’s published literature. The conditions for any tests (to be) performed on Lighting Products which are claimed to have not performed in accordance with the terms of this limited warranty shall be mutually agreed upon in writing and Universal may be represented at any such tests. DISCLAIMER. TO THE FULLEST EXTENT PERMITTED BY LAW, UNIVERSAL DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, INFRINGEMENT, AND THOSE ARISING OUT OF PERFORMANCE OR DEALING OR USAGE OF TRADE OR ANY OTHER IMPLIED WARRANTY WITH RESPECT TO ANY LIGHTING PRODUCT(S). To the fullest extent permitted by law the foregoing limited warranty is exclusive and in lieu of all other statutory, written or oral warranties and no other warranties of any kind, statutory or otherwise, are given or herein expressed. LIMITATIONS OF LIABILITY. To the fullest extent permitted by Law, this limited warranty sets forth the exclusive remedy available to any permitted claimant and under no circumstances, whether as a result of breach of contract, breach of warranty, tort, strict liability or otherwise, will Universal be liable for consequential, incidental, special or exemplary damages, including, but not limited to, loss of profits, loss of use or damage to any property or equipment, cost of capital, cost of substitute product, facilities or services, down time costs or claims of claimant’s customers. Universal’s liability for all claims of any kind or for any loss or damages arising out of, resulting from or concerning any aspect of this limited warranty or from the Lighting Products or services furnished hereunder, shall not exceed the price of the specific Lighting Product which gives right to the claim. This exclusive limited warranty shall not be deemed to have failed its essential purpose as long as Universal is willing and able to carry out the terms of this limited warranty. WARRANTY REPORTING. The obligations of Universal under this limited warranty shall not arise unless Universal is notified in writing of a defect that is accompanied by a written statement specifying the claim of defect within sixty (60) days after an alleged defect is first known and no later than the expiration of the applicable Warranty Period. Any warranty claims and the supporting statement shall be sent to Universal’s Warranty department at the address listed below. REQUIRED PROVISIONS DEEMED INSERTED. Each and every provision of any applicable law, regulation, and/or clause which is required by any applicable law or regulation to be inserted in this limited warranty shall be deemed to be inserted herein, and this limited warranty shall be read and enforced as though it were included herein, and if through mistake or otherwise any such provision is not inserted, or is not correctly inserted, then upon the written application of Universal or any purchaser or first end-user purchaser of the Lighting Products, this limited warranty shall forthwith be automatically amended to make such insertion or correction. Email: TES@UNVLT.com PAGE 10-1 FOR MORE INFORMATION CALL 1-800-BALLAST (225-5278) Universal Lighting Technologies 51 Century Blvd., Ste 230 Nashville, TN 37215 General Info: (615) 316-5100 For Technical Engineering Services (TES), application support and warranty information, call 1-800-BALLAST Website: www.unvlt.com email: webmaster@unvlt.com All specification information is subject to change without notification. ULTNAV0614 Universal Lighting Technologies is a member of the Panasonic Group
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2014:06:11 13:31:45-05:00 Creator : Adobe InDesign CC (Macintosh) Modify Date : 2014:06:11 13:31:45-05:00 Title : Trapped : False XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2014:06:11 13:31:45-05:00 Creator Tool : Adobe InDesign CC (Macintosh) Format : application/pdf Document ID : uuid:9102e65a-379b-3c48-af33-ba134d894a3c Instance ID : uuid:80d6b52e-062a-d549-b27d-cc39a25cf25d Producer : Adobe PDF Library 11.0 Page Count : 193EXIF Metadata provided by EXIF.tools