DATENBLATT
2014-09-27
: Pdf 118800-Attachment 118800-Attachment 003462 Batch8 unilog
Open the PDF directly: View PDF 
.
Page Count: 2
U.I. Lapp
GmbH
DATA SHEET
ETHERLINE® P Cat. 5e 4x2x24/1 AWG
DB2170297
valid from: 25.03.2014
Originator: RAWE/PDC
approved: HAPF/PDC
Document: DB2170297
page 1 of 2
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10DE
Application
ETHERLINE® P Cat. 5e 4x2x24/1 AWG is a CATEGORY 5e high speed data transmission cable for industrial environments.
This data cable meets the requirements of Standards EIA/TIA-568, TSB-36 and ISO/IEC 11801 „Generic Cabling for Cus-
tomer Premises“ for CLASS D Links. The high quality screen ensures high transmission reliability of data transfer in electro-
magnetically polluted areas. The PUR sheath is widely resistant against mineral oils and abrasion. The cable is intended for
fixed installation in dry and damp interiors and outdoors.
Approvals: UL AWM styles 11117 and 21576 (1000 V, 80 °C) acc. to UL 758
cRU AWM I/II A/B (FT2) acc. to CSA C22.2 No.210-05
Design
Conductor
bare copper wire, ∅ ca. 0.51 mm (24 AWG)
Insulation
foam-skin polyolefin, core Ø max. 1.04 mm
Core identification code
acc. to IEC 708-1
pair 1: white(-blue)/blue; pair 2: white(-orange)/orange;
pair 3: white(-green)/green; pair 4: white(-brown)/brown
Stranding
cores twisted to pairs, pairs stranded together
Wrapping
1 layer plastic-foil
Screening
plastic laminated aluminum foil
on top:
braid of tinned copper wire, coverage ca. 85 %
Outer sheath
PUR halogen free compound, blue (similar to RAL 5021), outer Ø: ca. 6.1 mm
Electrical properties at 20° C
Resistance (loop)
max. 192 Ω/km
Insulation resistance
min. 5 GΩxkm
Mutual capacitance
nom. 48 nF/km
(at 800 Hz)
Characteristic impedance
100 Ω ±15 Ω
(1MHz up to 100 MHz)
Operating peak voltage
125 V (not for power purposes)
Velocity of propagation
ca. 0.77 c
Signal propagation time
nom. 433 ns/100m
Delay difference
<20 ns/100m
Test voltage (1 minute)
core/core: 1000 V
core/screening: 1000 V
U.I. Lapp
GmbH
DATA SHEET
ETHERLINE® P Cat. 5e 4x2x24/1 AWG
DB2170297
valid from: 25.03.2014
Originator: RAWE/PDC
approved: HAPF/PDC
Document: DB2170297
page 2 of 2
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10DE
Transmission properties
Transmission properties acc. to IEC 61156-5: abstract of the minimum requirements shown in the table:
f
[MHz]
Attenuation
[dB/100m]
NEXT [dB]
PS NEXT
[dB]
EL FEXT
[dB/100m]
PS EL FEXT
[dB/100m]
RL
1
2,1
65,3
62,3
-
-
-
4
4,1
56,3
53,3
52,0
49,0
-
10
6,5
50,3
47,3
44,0
41,0
-
16
8,3
47,2
44,2
39,9
36,9
-
31,25
11,7
42,9
39,9
34,1
31,1
23,6
62,5
17,0
38,4
35,4
28,1
25,1
21,5
100
22,0
35,3
32,3
24,0
21,0
20,1
Mechanical and thermal properties
Minimum bending radius
7,5 x cable Ø
Permissible temperature range
moved (VDE): -5˚ C up to +50˚ C
fixed installation (VDE): -30˚ C up to +80˚ C
moved (UL): -5˚ C up to +80˚ C
fixed installation (UL): -30˚ C up to +80˚ C
Halogen free
acc. to VDE 0472-815
Flame retardant
acc. to IEC 60332-1-2
General requirements
Dangerous and forbidden substances acc. to RoHS directive (2011/65/EU)
are not allowed to the manufacturing.
