Product Detail Manual
2014-09-08
: Pdf 120325-Attachment 120325-Attachment 625912 Batch4 unilog
Open the PDF directly: View PDF 
.
Page Count: 1
7
Finally,
the Amazing Knuckle Saver from Rack-A-Tiers®
• Captures wire
• Bend inside enclosures to the right or left
• Bend to the front or back
• Your feeders will lie in the lugs
Machined from 6061 aircraft aluminum
Fits a standard 1/2” ratchet.
Piece of Cake
Cable Bender
Part #77455
Fits #3 to 350 MCM conductors
Knuckle Buster
Fast attachment
for conduit pulls
No stripping required
No taping required
SNATCH STRAP
Wire Puller
1/2” pipe?
90˚ bends?
Fits Easily Part #69455
Ever give a meter base a knuckle sandwich? Too bad it was your own. Next time, defend yourself with the Bend All. Perfectly sized for 4/0, it takes the
pain out of 200 amp services or sub feeders and conductors like it too. The Bend All makes micro adjustable bends without brutalizing the wire.
Time is money and when you think about it, a lot of time is spent stripping, taping and untaping wire for fishtape pulls. The SNATCH STRAP gives you
back this time. Because it staggers the wire, you can pull more conductors with less effort. Because SNATCH STRAPS can be daisy chained, you can
easily drop wire groups at boxes along the pull. Color coded for easy circuit and phase identification.
3 Straps per kit
Part #42050-1/2”
#42075-3/4”
#42100-1”
#42000-Multi-Pack
‘SHOEHORNS FOR YOUR WIRE‛
• Reduces Time and Labour
• Reduces the chance of
damaging wires
• Turns wire pulling
into a one man job
Three Sizes Available: 1/2” 3/4” 1”
Two man wire pulls can be costly. So can cut wires and short circuits. The All American Pull Buddy turns one guy into a ‘crew’. Fast, easy to use and
reusable. Why not protect the conductors on all your pulls?
