Product Detail Manual

116840-Catalog 116840-Catalog 116840-Catalog 082472 Batch4 unilog cesco-content

134961-Attachment 134961-Attachment 134961-Attachment 082472 Batch4 unilog cesco-content

161356-Brochure 161356-Brochure 161356-Brochure 082472 Batch4 unilog cesco-content

134961-Attachment 134961-Attachment 134961-Attachment 885363 Batch4 unilog cesco-content

127928-Catalog 127928-Catalog 127928-Catalog Batch9 unilog cesco-content

: Pdf 121151-Attachment 121151-Attachment 082472 Batch12 unilog

Open the PDF directly: View PDF .
Page Count: 72

TOOL CATALOG

power tool accessories

hand tools

UPBLADE with lenox

1-9

POwER tOOL ACCESSORiES

10-51

hAND tOOLS

52-68

1

lenoxtools.com

WHAT’S UPBLADE?

If you use a LENOX blade you might already know. But

UpBlade is more than just upgrading to the best blades

in the market, UpBlade is a continuous commitment

to being better. When you switch to LENOX you

don’t just UpBlade your blade, you UpBlade your

tools, your cuts, your capabilities.

Customer Service 800-628-8810

2

WHEN CUTTING IS WHAT YOU DO, THE

BLADE YOU CHOOSE BECOMES EVEN

MORE IMPORTANT.

You’re only as efficient as your blade allows you to be. That’s

why we make sure our band saw blades cut faster and

last longer, with the lowest cost per cut—making your

operations more competitive. And with our tech reps

making sure that our blades are always working at their

optimal level, you’ll spend more time cutting and less

time changing blades. If you don’t believe us, talk

to your LENOX® representative about taking the

UpBlade Challenge.

3

lenoxtools.com

THERE’S ONLY ONE PART OF YOUR

SAW THAT ACTUALLY MAKES THE

CUT — THE BLADE.

So you could have the best power tools and machines in the

world, but they’ll only be as good as the blades you put in them.

And even though it might only be part of your job, if your blade isn’t

making the cut, the whole job pays the price. From our reciprocating

saw blades to our carbide band saw blades, our products are always at

the forefront of innovation and quality. Our blades are faster and more

efficient, allowing you to unlock your full potential.

Customer Service 800-628-8810

4

5

lenoxtools.com

HAVING THE BEST BLADES IS ONLY

PART OF THE EQUATION.

To truly UpBlade, you must also improve yourself. That’s why

we’ve developed the LENOX Institute of Technology (LIT).

We provide our Technical Service Reps, distributor partners

and consumers with hands-on training by expert instructors

who have years of LENOX experience and application

knowledge. Because our blades are only as good as

the hands that wield them, LIT helps us make sure

those hands are amongst the best in the business.

Customer Service 800-628-8810

6

OUR UPBLADE HERITAGE.

The word UpBlade represents a mindset that LENOX®

has lived by from day one. For nearly 100 years we’ve led

the industry through many changes and innovations, and

our blades have consistently remained on top. You saw this

reflected in Hackman® as he toured the world facing bigger

challenges at every stop—returning to us with insights that helped

improve our blades’ designs. And you see it with the challenges we

put before our blades in our One Blade campaign. Challenges such as

cutting 8 cars with a single blade. As we push our blades to the limit

we UpBlade not only their achievements, but your perception of what one

blade is capable of. UpBlade is the reason LENOX makes the best blades in

the market. Because we’re not satisfied with being the best. We’re working

hard every day to get even better.

7

lenoxtools.com

Customer Service 800-628-8810

8

Committed to being better for nearly 100 years

LENOX purchases an electron

beam welder and begins

manufacturing Bi-metal Band

Saw Blades

1965

LENOX T2™ Technology

recip blades.

2008

Bi-Metal Drilling technology

added to product line

2009

ARMOR® Band Saw Blades

added to the product line

2005

Snips, and Q Performance

Solution™ Band Saw Blades

added to the product line

2007

Hand Tools and Power Tool

Accessories.

First Bi-metal Reciprocating

Saw Blades

1977

HACKMAN® uses a LENOX Hacksaw

Blade to cut his first car in half

1981

1918

1915

LENOX® American Saw founded by John

Swanson, Carl Ericson, and Carl Davis to

manufacture Hacksaw Blades in Springfield, MA

All LENOX operations moved

to its current location in

East Longmeadow, MA

1964

Asia Pacific headquarters

set up in Shanghai

2006

LENOX Gold ® Bi-metal

Utility Blade and Knife

added to the product line

Q88™ Band Saw Blade launched in Asia

2004

Band Saw Blade production begins

9

lenoxtools.com

2010 100 year

anniVersary

2015

LENOX becomes the first

company in the blade

industry to achieve ISO

9001 certification

1996

LENOX Self-Feed Bits

added to the product line

1991

Hacksaw Frames and

Carbide Band Saw Blades

added to the product line

1985 LENOX VARI-BIT ® added to

the product line

1986 LENOX enters the Latin

American Market

1987

1952

LENOX’s “The Blade in the Plaid Box” airplane flies

from Portland, ME to Daytona, FL dropping circulars

as it passes over large cities

A second plant was built on

Chestnut Street, East Longmeadow, MA

1921

Hole Saws added to

product line

LENOX began manufacturing

Band Saw Blades at the

East Longmeadow facility

1959

1961

2011

Bi-Metal SPEED SLOT®

Hole Saw

LENOX purchases a local

Hand Hacksaw and

Utility Knife Blade

manufacturer and

opened LENOX of Brazil

1998

accessories

LENOX Gold®

.......................................................... 14, 15

LaZER® ............................................................................ 16

Demolition ...................................................................... 17

Bi-metal .................................................................... 18, 19

LENOX DIamOnD™ & Carbide Grit ...........................20

Carbide Tipped, Fleam Ground, Pallet Dismantling . 21

Reciprocating Saw Blade Kits .....................................22

Blade, TPI & Blade Length Selection Guides ...........23

Cross Reference Chart .......................................... 24, 25

maSTER-BanD™ & WOLF-BanD® Portable Bands ...26

t2™ RECiPROCAtiNg

SAw BLADES

Customer Service 800-628-8810

14

lenox gold® ReCIPRoCATInG SAW BlAdeS

Longest Lasting Blade. Ever.

ExtEndEd bladE lifE

T2™ Technology and precision applied titanium coating

help dissipate heat making blades last longer

fastEr cuts

Titanium coating makes teeth more wear

resistant so they stay sharp for quicker cuts

longEr bladE lifE and vErsatility

T2 technology’s patented tooth design delivers longer blade life

and enables faster cutting in the widest array of cutting applications

Wood

T2™ RECIPROCATING SAW BLADES

Demolition

Metal laZEr® Extreme Metal

15

lenoxtools.com T2™ RECIPROCATING SAW BLADES

lenox gold ReCIPRoCATInG SAW BlAdeS (ConTInued)

LENGTH X WIDTH X THICKNESS 5-PACK 25-PACK APPLICATION

TPI IN MM PROD NO PROD NO

WOOD

6 6 x 7/16 x .050 152 x 11 x 1.3 21063676GRC —

6 6 x 3/4 x .050 152 x 19 x 1.3 21060656GR 21074B656GR

6 9 x 3/4 x .050 229 x 19 x 1.3 21062956GR 21076B956GR

6 12 x 3/4 x .050 305 x 19 x 1.3 21061156GR 21075B156GR

METAL

10 6 x 3/4 x .035 152 x 19 x .9 21064610GR 21078B610GR

10 8 x 3/4 x .050 203 x 19 x 1.3 21065810GR 21079B810GR

14 4 x 3/4 x .035 102 x 19 x .9 21066414GR 21080B414GR

14 6 x 3/4 x .035 152 x 19 x .9 21067614GR 21081B614GR

18 4 x 3/4 x .035 102 x 19 x .9 21068418GR 21082B418GR

18 6 x 3/4 x .035 152 x 19 x .9 21069618GR 21083B618GR

18 8 x 3/4 x .035 203 x 19 x .9 21070818GR 21084B818GR

24 4 x 3/4 x .035 102 x 19 x .9 21071424GR —

24 6 x 3/4 x .035 152 x 19 x .9 21072624GR 21086B624GR

24 8 x 3/4 x .035 203 x 19 x .9 21073824GR 21087B824GR

DEMOLITION

6 6 x 1 x .062 152 x 22 x 1.6 210886066GR 21220B6066GR

6 9 x 1 x .062 229 x 22 x 1.6 21090966GR 21222B966GR

6 12 x 1 x .062 305 x 22 x 1.6 21091106GR 21223B106GR

10 9 x 1 x .062 229 x 22 x 1.6 21089960GR 21221B960GR

EXTREME METAL CUTTING

8 6 x 1 x .042 152 x 25 x 1.07 210926108GR —

8 9 x 1 x .042 229 x 25 x 1.07 210969108GR —

10 6 x 1 x .042 152 x 25 x 1.07 210936110GR 21225B6110GR

10 9 x 1 x .042 229 x 25 x 1.07 210979110GR 21229B9110GR

10 12 x 1 x .042 305 x 25 x 1.07 2110012110GR 21237B12110GR

14 6 x 1 x .042 152 x 25 x 1.07 210946114GR 21226B6114GR

14 9 x 1 x .042 229 x 25 x 1.07 210989114GR 21235B9114GR

14 12 x 1 x .042 305 x 25 x 1.07 2110112114GR 21238B12114GR

18 6 x 1 x .042 152 x 25 x 1.07 210956118GR 21227B6118GR

18 9 x 1 x .042 229 x 25 x 1.07 210999118GR 21236B9118GR

18 12 x 1 x .042 305 x 25 x 1.07 2110212118GR 21239B12118GR

WOOD

NAIL-

EMBEDDED

WOOD

CONTOUR

WOOD PLASTIC THICK

METAL

MEDIUM

METAL

THIN

METAL

NON-FEROUS

METAL

DEMOLITION

FIRE

&

RESCUE

PLASTER

&

DRYWALL

CAST IRON CEMENT

BOARD TILE ABRASIVES NATURAL

STONE

ICon RefeRenCe ChART

Patent pending

plunge cutting

tooth design

prevents blade

from walking to

deliver faster,

easier plunge cuts

PLUNGE CUTTING

WOOD BLADE

Customer Service 800-628-8810

16

LAzER® ReCIPRoCATInG

SAW BlAdeS

Best for Heavy Metal Cutting

fast and Easy hEavy mEtal cutting

T2 technology’s patented tooth design delivers

longer blade life and enables faster cutting

optimiZEd for highEr pErformancE

Reinforced tooth design ensures higher performance

in the most demanding jobs

straight cuts

Wider than conventional blades,

this blade cuts straighter

TPI

LENGTH X WIDTH X THICKNESS 2-PACK 5-PACK 25-PACK 50-PACK APPLICATION

STRUCTURAL

IN MM PROD NO PROD NO PROD NO PROD NO

8 6 x 1 x .042 152 x 25 x 1.07 — 201926108R 20196B6108R —Structural Steels

greater than

3/16"

8 9 x 1 x .042 229 x 25 x 1.07 — 201939108R 20195B9108R —

8 12 x 1 x .042 305 x 25 x 1.07 — 2019412108R 20197B12108R —

10 6 x 1 x .042 152 x 25 x 1.07 24901T6110R 201706110R 20171B6110R —Structural Steels

and Al l Me t al s

3/16"–1/2"

10 9 x 1 x .042 229 x 25 x 1.07 24905T9110R 201769110R 20177B9110R —

10 12 x 1 x .042 305 x 25 x 1.07 24909T12110R 2018212110R 20183B12110R —

14 6 x 1 x .042 152 x 25 x 1.07 24902T6114R 201726114R 20173B6114R 22764OSB6114R Structural Steels

and A l l Me t a ls

3/32"–3/8"

14 9 x 1 x .042 229 x 25 x 1.07 24906T9114R 201789114R 20179B9114R 22766OSB9114R

14 12 x 1 x .042 305 x 25 x 1.07 24910T12114R 2018412114R 20185B12114R —

18 6 x 1 x .042 152 x 25 x 1.07 24903T6118R 201746118R 20175B6118R 22765OSB6118R

Structural Steels

and A l l Me t al s

1/16"–1/4"

18 9 x 1 x .042 229 x 25 x 1.07 24907T9118R 201809118R 20181B9118R 22767OSB9118R

18 12 x 1 x .042 305 x 25 x 1.07 24911T12118R 2019012118R 20191B12118R —

T2™ RECIPROCATING SAW BLADES

17

lenoxtools.com

demolITIon ReCIPRoCATInG SAW BlAdeS

Best for Demolition and Nail-Embedded Wood

LENGTH X WIDTH X THICKNESS 2-PACK 5-PACK 25-PACK 50-PACK APPLICATION

TPI IN MM PROD NO PROD NO PROD NO PROD NO

6 6 x 1 x .062 152 x 22 x 1.6 205126066R 203706066R5 20514B6066R —

6 9 x 1 x .062 229 x 22 x 1.6 20598966R 20371966R5 20523B966R 22763OSB966R

6 12 x 1 x .062 305 x 22 x 1.6 20500106R 20373106R5 20485B106R —

10 9 x 1 x .062 229 x 22 x 1.6 20597960R 20372960R5 20524B960R 22762OSB960R

dEmolition jobs arE EasiEr

T2 technology’s patented tooth design delivers longer

blade life and enables faster cutting

maximum durability

The tallest blade on the market prevents bending and

provides maximum control in the toughest demolition

applications

aggrEssivE cuts EvEn in tight spacEs

Each blade has an optimized blade geometry including

an aggressive tang angle and tapered blade shape to

allow for cutting in tight areas

T2™ RECIPROCATING SAW BLADES

Customer Service 800-628-8810

18

BI-meTAl ReCIPRoCATInG SAW BlAdeS

Long Lasting, Fast Cutting and Versatile

LENGTH X WIDTH X THICKNESS 1-PACK 5-PACK 25-PACK 50-PACK APPLICATION

TPI IN MM PROD NO PROD NO PROD NO PROD NO

4 6 x 3/4 x .050 152 x 19 x 1.3 20574S634R 20575634R — —

6 4 x 3/4 x .050 102 x 19 x 1.3 — 20449456RP — —

6 6 x 3/4 x .050 152 x 19 x 1.3 20571S636RP 20570636RP 20497B636RP —

6 6 x 3/4 x .035 152 x 19 x .9 20559S606R 20560606R 20492B606R —

6 6 x 7/16 x .050 152 x 11 x 1.3 20557S676RC 20556676RC — —

6 6 x 3/4 x .050 152 x 19 x 1.3 20573S656R 20572656R 20530B656R 22750OSB656R

6 9 x 3/4 x .050 229 x 19 x 1.3 20587S956R 20582956R 20558B956R 22752OSB956R

6 12 x 3/4 x .050 305 x 19 x 1.3 20586S156R 20585156R 20495B156R 22755OSB156R

10 6 x 3/4 x .035 152 x 19 x .9 20561S610R 20562610R 20493B610R 22761OSB610R

10 8 x 3/4 x .050 203 x 19 x 1.3 20581S810R 20580810R 20590B810R 22753OSB810R

10/14 6 x 3/4 x .050 152 x 19 x 1.3 20592650R* 20374650R5 20515B650R

10/14 8 x 3/4 x .050 203 x 19 x 1.3 — 20577850R 20535B850R

10/14 12 x 3/4 x .050 305 x 19 x 1.3 20584S110R 20583110R 20491B110R 22758OSB110R

10/14 6 x 3/4 x .035 152 x 19 x .9 — 12129635R — —

10/14 8 x 3/4 x .035 203 x 19 x .9 — 12130835R — —

* This item is a 2-pack

longEr bladE lifE and vErsatility

T2 technology’s patented tooth design delivers longer

blade life and enables faster cutting in the widest array of

cutting applications

minimiZE friction and hEat build up

Engineered for performance this blade can handle the

widest variety of metal materials providing an optimized

cutting experience

T2™ RECIPROCATING SAW BLADES

19

lenoxtools.com T2™ RECIPROCATING SAW BLADES

LENGTH X WIDTH X THICKNESS 1-PACK 5-PACK 25-PACK 50-PACK APPLICATION

TPI IN MM PROD NO PROD NO PROD NO PROD NO

14 3-5/8 x 5/16 x .035 92 x 8 x .9 — 20520314RC — —

14 4 x 3/4 x .035 102 x 19 x .9 20551S414R 20550414R 20488B414R 22760OSB414R

14 6 x 3/4 x .035 152 x 19 x .9 20565S614R 20564614R 20494B614R 22756OSB614R

14 8 x 3/4 x .035 203 x 19 x .9 — 21519814R 1855567 1855570

14 9 x 3/4 x .050 225 x 19 x 1.3 205119514R*

18 3-5/8 x 5/16 x .035 92 x 8 x .9 20522S318RC 20521318RC — —

18 4 x 3/4 x .035 102 x 19 x .9 20553S418R 20552418R 20489B418R 22759OSB418R

18 6 x 3/4 x .035 152 x 19 x .9 20567S618R 20566618R 20529B618R 22751OSB618R

18 8 x 3/4 x .035 203 x 19 x .9 20563S818R 20578818R 20487B818R 22754OSB818R

18 12 x 3/4 x .035 305 x 29 x .9 — 21510118R 21511B118R —

24 4 x 3/4 x .035 102 x 19 x .9 20555S424R 20554424R 20490B424R —

24 6 x 3/4 x .035 152 x 19 x .9 20569S624R 20568624R 20496B624R 22757OSB624R

24 8 x 3/4 x .035 203 x 19 x .9 — 20579824R — —

* This item is a 2-pack

BI-meTAl ReCIPRoCATInG SAW BlAdeS (ConTInued)

Customer Service 800-628-8810

20 RECIPROCATING SAW BLADES

lenox DiAmOND™ ReCIPRoCATInG SAW BlAdeS

Cuts Cast. Fast.

*Speed measured cutting 4" cast iron pipe at maximum speed vs. the leading competitor

high pErformancE in abrasivE matErials

Cuts through tough materials that resist chip-forming, including

ceramics, pipe, man-made stone, brick, marble and more

smooth, quick cuts

Uniformly applied, durable carbide grit particles on a flexible blade

provide fast cuts without snagging or binding

CARBIde GRIT ReCIPRoCATInG SAW BlAdeS

For Cutting Non-Metallic Materials

LENGTH X WIDTH X THICKNESS 2-PACK APPLICATION

IN MM PROD NO GRIT

6 x 3/4 x .032 152 x 19 x .8 20505600RG Medium

Fiberglass, Ceramic Tile,

Cultured Marble, Clays, Brick

8 x 3/4 x .040 203 x 19 x 1 20576800RG Medium

10 x 3/4 x .050 254 x 19 x 1.3 20506100RG Medium

LENGTH X WIDTH X THICKNESS 1-PACK APPLICATION

IN MM PROD NO

8 x 3/4 x .040 203 x 19 x 1 10833800RDG Cast Iron, Tile, Brick

and Natural Stone

DOUBLE TANG

9 x 3/4 x .042 225 x 19 x 1.07 1766338

11 x 3/4 x .042 275 x 19 x 1.07 1766356

lasts longEr

Nickel alloy-brazed diamond particles maintain sharpness

to keep cutting after conventional carbide grit fails

cuts 3x fastEr*

A narrow kerf design enables thinner, faster cuts

straight, clEan cuts

Unlike bulky snap cutters which crush pipes and leave ragged,

uneven cuts, LENOX DIamOnD cuts clean. Durable chrome

alloy backing steel provides extra stability

21

lenoxtools.com RECIPROCATING SAW BLADES

EnginEErEd for strEngth

Specially treated to enhance performance and withstand nail

strikes to keep cutting fast

long cutting lifE

Patented tooth design and a rounded nose provide long blade

life and enable easy access in tight spots

PAlleT dISmAnTlInG ReCIPRoCATInG SAW BlAdeS

High Performance Cutting for Pallet Refurbishing

vErsatilE and EffEctivE

Cuts tough materials including cement board,

cast aluminum, pressure treated wood,

engineered lumber, and more

EnginEErEd for fastEr pErformancE

Triple chip tooth design cuts 25% faster than

standard carbide blades and provides exceptional

fatigue resistance

CARBIde TIPPed ReCIPRoCATInG SAW BlAdeS

Engineered to Cut the Toughest Materials

LENGTH X WIDTH X THICKNESS 1-PACK APPLICATION

TPI IN MM PROD NO PROFILE

3 8 x 3/4 x .050 203 x 19 x 1.3 205998535RCT Straight Fiberglass, Particle

Board, Pressure-Treated

Woods, Plywood,

Cast Aluminum

6 6 x 3/4 x .050 152 x 19 x 1.3 205966565RCT Straight

6 6 x 3/4 x .050 152 x 19 x 1.3 205956563RCT Contour

exTRA ShARP fleAm GRound ReCIPRoCATInG BlAdeS

Fast, Clean Cutting in Wood or Plastic

LENGTH X WIDTH X THICKNESS 5-PACK APPLICATION

TPI IN MM PROD NO

6 6 x 3/4 x .050 152 x 19 x 1.3 121016W6R

Clean Wood, Plastics, Pruning

6 9 x 3/4 x .050 229 x 19 x 1.3 121029W6R

bi-mEtal construction

Durable and flexible to survive nail strikes

flEam ground tooth form

Fast, clean wood cutting

idEal for clEan Wood, plastic pipE

and trEE pruning

LENGTH X WIDTH X THICKNESS 250-PACK APPLICATION

TPI IN MM PROD NO

10 8 x 3/4 x .035 203 x 19 x .9 10729810RPC

Dismantling Pallets

10 10 x 3/4 x .035 254 x 19 x .9 107301010RPC

Customer Service 800-628-8810

22

LENGTH X WIDTH X THICKNESS

QTY PROD NO TPI IN MM

1414R 14 4 x 3/4 x .035 102 x 19 x .9

1418R 18 4 x 3/4 x .035 102 x 19 x .9

1614R 14 6 x 3/4 x .035 152 x 19 x .9

1618R 18 6 x 3/4 x .035 152 x 19 x .9

1656R 6 6 x 3/4 x .050 152 x 19 x 1.3

LENGTH X WIDTH X THICKNESS

QTY PROD NO TPI IN MM

5614R 14 6 x 3/4 x .035 152 x 19 x .9

5618R 18 6 x 3/4 x .035 152 x 19 x .9

5656R 6 6 x 3/4 x .050 152 x 19 x 1.3

LENGTH X WIDTH X THICKNESS

QTY PROD NO TPI IN MM

2656R 6 6 x 3/4 x .050 152 x 19 x 1.3

2624R 24 6 x 3/4 x .035 152 x 19 x .9

2818R 18 8 x 3/4 x .035 203 x 19 x .9

2810R 10 8 x 3/4 x .050 203 x 19 x 1.3

1960R 10 9 x 7/8 x .062 229 x 22 x 1.6

LENGTH X WIDTH X THICKNESS

QTY PROD NO TPI IN MM

36066R 6 6 x 7/8 x .062 150 x 22 x 1.6

36114R 14 6 x 1 x .042 150 x 25 x 1.1

29114R 14 9 x 1 x .042 225 x 25 x 1.1

2966R 6 9 x 7/8 x .062 225 x 22 x 1.6

2960R 10 9 x 7/8 x .062 225 x 22 x 1.6

20502546A

5 PIECE

4" AND 6" BLADE ASSORTMENT

1073415RKG

15 PIECE KIT

Includes Storage Case

ReCIPRoCATInG SAW BlAde kITS

1214412RKD

12 PIECE

DEMOLITION KIT

Includes Storage Case

121439KPE

9 PIECE

GENERAL PURPOSE KIT

Includes Storage Case

LENGTH X WIDTH X THICKNESS

QTY PROD NO TPI IN MM

3618R 18 6 x 3/4 x .035 152 x 19 x .9

2818R 18 8 x 3/4 x .035 203 x 19 x .9

LENGTH X WIDTH X THICKNESS

QTY PROD NO TPI IN MM

3656R 66 x 3/4 x .050 52 x 19 x 1.3

2956R 6 9 x 3/4 x .035 29 x 19 x 1.3

1839466

5 PIECE

METAL CUTTING KIT

LENGTH X WIDTH X THICKNESS

QTY PROD NO TPI IN MM

16066R 6 6 x 1 x .062 150 x 25 x 1.6

16114R 14 6 x 1 x .042 150 x 25 x 1.1

19114R 14 9 x 1 x .042 225 x 25 x 1.1

1966R 6 9 x 1 x .062 225 x 25 x 1.6

1960R 10 9 x 1 x .062 225 x 25 x 1.6

1839465

5 PIECE

DEMOLITION KIT

1839467

5 PIECE

WOOD CUTTING KIT

RECIPROCATING SAW BLADES

23

lenoxtools.com

BlAde lenGTh SeleCTIon GuIde

ReCIPRoCATInG SAW BlAde SeleCTIon GuIde

6"

4"

9"

12"

WOOD

NAIL-

EMBEDDED

WOOD

NON-

FERROUS

METAL

DEMO-

LITION

FIRE &

RESCUE

PLASTICS &

COMPOSITES

THICK

METAL

MEDIUM

METAL

THIN

METAL

DRYWALL/

PLASTER

CEMENT

BOARD

CAST

IRON ABRASIVES

BeST

LENOX gold®CARBIDE TIPPED LENOX

diamond™

BeTTeR

BI-METAL laZEr®BI-METAL laZEr BI-METAL LENOX

diamond CARBIDE GRIT

Good

— BI-METAL — BI-METAL — CARBIDE

GRIT —

TeeTh PeR InCh SeleCTIon GuIde

WOOD

THICK METAL 1/8"–1/2"

MEDIUM METAL 3/32"–5/16"

THIN METAL

1/8” AND LESS

ABRASIVES

ROUGH CUT QUALITY SMOOTH

FAST CUT SPEED SLOW

1"

Always keep 2 teeth

in the cut.

WIDTH OF MATERIAL + 3" = BLADE LENGTH

EXAMPLE: 5" (WIDTH) + 3" = 8". USE AN 8" OR 9" BLADE

WIDTHWIDTH

RECIPROCATING SAW BLADES

8"

Customer Service 800-628-8810

24

LENGTH BOSCH® / MILWAUKEE®/

TPI IN MM DESC SHAPE BOSCH EDGE DEWALT® MILWAUKEE

ICE MK MORSE®

lenox gold®

6 6 152 676GRC

6 6 152 656GR

6 6 152 6066GR

6 9 229 956GR

6 9 229 966GR

612 305 156GR

612 305 106GR

8 6 152 6108GR

8 9 229 9108GR

10 6 152 610GR

10 6 152 6110GR

10 8203 810GR

10 9229 9110GR

10 12 305 12110GR

14 4102 414GR

14 6 152 614GR

14 6 152 6114GR

14 9229 9114GR

14 12 305 12114GR

18 4102 418GR

18 6 152 618GR

18 6 152 6118GR

18 8203 818GR

18 9229 9118GR

18 12 305 12118GR

24 4102 424GR

24 6 152 624GR

24 8203 824GR

lenox

DiAmOND™

Grit 9225 800DTDG —

Grit 11 275 100DTDG —

LAzER®

8 6 152 6108R RSM6X2, RSM7X2

RESM6X2 —5700, 5701 —

8 9 229 9108R RSM9X2, RESM9X2 —5705, 5706 —

812 305 12108R RSM12X2 —

5710, 5711

—

10 6 152 6110R S123XF, RPRM6,

SAPP6, RESM6X2 —5712, 4712 RB66210, RBFR66210W,

RBMC64210

10 9229 9110R RESM9X2 —5713, 4713 RB1010, RBMC95010

10 12 305 12110R RAP1210 —5714

RB1210, RB126210,

RBFR126210W,

RBMC125010

14 6 152 6114R RCM6X2, RECM6X2 DWA4186 5782, 4782 RBFR66214W, RBMC64214

14 9229 9114R RCM9X2, RECM9X2 DWA4188 5787, 5795, 4788 RBFR96214W, RBMC95014

14 12 305 12114R RCM12X2 DWA4112 5794 RB1214, RBFR126214W,

RBMC125014, RBU10514

18 6 152 6118R RCTM6X2,RECM6X2 —5784, 4784 RB65018, RBMC64218

18 9229 9118R RECM9X2 —5788, 5798, 4788 RBMC95018

18 12 305 12118R — — 5789 RBMC125018

ReCIPRoCATInG SAW BlAdeS CRoSS RefeRenCe ChART

RECIPROCATING SAW BLADES

25

lenoxtools.com

LENGTH BOSCH® / MILWAUKEE®/

TPI IN MM DESC SHAPE BOSCH EDGE DEWALT® MILWAUKEE

ICE MK MORSE®

demolITIon

6 6 152 6066R RDN6V DW4862 5021, 5701 RB66206C

6 9 229 966R RDN9V DW4863 5026 RB96206

612 305 106R RDN12V DW4806, DW4806B,

DW4845, DW4877

5027

RB126206

10 9229 960R REDM6X2, REDM9X2 — — RB96210, RBFR96210W

STAndARd BI-meTAl

4 6 152 634R S234XF DW4801 —RC603

6 4 102 456RP — —5052 RB606

6 6 152 636RP RDW66 — — RB606P

6 6 152 656R RDN6V, RHN66, RW66,

RN66, RN96, RN126

DW4802, DW4802B,

DW4847, DW4848B,

DW4876

5031, 5035 RB63506, RB65006, RB65058,

RC606

6 6 152 676RC —DW4816 5041 RB65006C

6 6 152 606R —DW4850 5012, 5015 RB606ST, RB658, RC606ST

6 9 229 956R RPRW8, RDN9V, RSN9V,

RHN96, RW96

DW4803, DW4803B,

DW4848 5016, 5036 RB93506, RB95006, RC905,

RC906

612 305 156R RHN126, RW126 DW4804, DW4804B,

DW4849 5017, 5037

RB123506, RB125006,

RB125058ST, RB125058,

RC1206

10 6 152 610R RPRAP6, RAP610 DW4806, DW4806B,

DW4845, DW4877

4091, 5090, 5091,

5092

RB610, RB65010, RBMC610,

RC610

10 8203 810R RPRAP8, RAP810,

RAP910 DW4865B 5093, 5175 RB810, RB8501014, RBMC810

10/14 6 152 635R

10/14 6 152 650R RD6V, RRD6V, SRD6,

RAP6V DW4864, DW4864B —RB61014, RB6501014,

RB6501014T

10/14 8203 835R 5193

10/14 8203 850R RD9V, RRD9V, SRD9,

RAP9V DW4865 5193 RB81014, RB8501014

10/14 12 305 110R

RD12V, RRD12V, SRD12,

RFM10V, SHMF10,

RAP12V

DW4838 5094, 5194 RB121014, RB12501014,

RB12501014ST, RB12501014

14 3-5/8 92 314RC —DW4814 5161, 5162 —

14 4102 414R —DW4807, DW4807B 5181 RB414, RH414

14 6 152 614R RM614 DW4808, DW4808B 5182, 5282, 4182 RB614, RB65014, RBMC614,

RH614

14 8203 814R RM914 —5187, 4187 RB814, RBMC814

14 9225 9514R

18 3-5/8 92 318RC RSM418 —5163 RB318S, RH318S, RH324S

18 4102 418R RS418 DW4810 5183 RB418, RH318, RH418

18 6 152 618R RS618, RM618 DW4811, DW4811B,

DW4878 5184, 5284, 4184 RB618, RBMC618, RH618

18 8203 818R RM918 DW4921 5188, 4188 RB814, RB818, RBMC818

18 12 305 118R RM1218 —5189, 4189 RB1018, RB1218, RBMC1218

24 4102 424R S518A, S518AF,

S518AF-100, S518EF,

S518G

DW4812 5185 RB424, RH424

24 6 152 624R RM624 DW4815 5186, 5286, 4186 RB624, RBMC624, RH624

24 8203 824R RM924 — — —

lenox

DiAmOND™

Grit 8203 800DRDG RCB8DG —1450 —

CARBIde

GRIT

Grit 6 152 600RG RCB6G DW4844 1400, 1410, 1420 RTCG4, RTCG6

Grit 8203 800RG RCB9G DW4843 1430 RTCG8

Grit 10 254 100RG — — — RTCT6065

CARBIde

TIPPed

38203 8535RCT — — — RTCT6065

6 6 152 6565RCT — — — RCFP66

66 152 6563RCT — — — —

fleAm

GRound

66 152 6W6R — — 5015 —

69229 9W6R — — 5016 —

RECIPROCATING SAW BLADES

Customer Service 800-628-8810

26

mAStER-BAND™ BlAdeS

Maximum Performance for Portable Band Saws

wOLf-BAND® BlAdeS

Professional Performance and Exceptional Value

EnhancEd bEam strEngth

Specially treated bands of .023 and .025 thicknesses offer

increased blade strength, reducing deflection and twisting of

blades during severe cutting conditions

shattEr rEsistant

Bi-metal blades bend and resist breaking and extend blade life

long lasting

LENOX TUFF TOOTH design reinforces tooth for longer blade life

LENGTH X WIDTH X THICKNESS EDGE 3-PACK 25-PACK APPLICATION

TPI IN MM MATERIAL PROD NO PROD NO

10/14 44-7/8 x 1/2 x .023 1140 x 12.7 x .6 Matrix 8011438EW1014 9403B38EW1014 1/4" & larger, most metals

14 44-7/8 x 1/2 x .023 1140 x 12.7 x .6 Matrix 8011538E W14 9404B38EW14 3/16"– 3/8," most metals

14/18 44-7/8 x 1/2 x .023 1140 x 12.7 x .6 Matrix 8011238E W1418 9407B38EW1418 1/8"– 5/16," most metals

18 44-7/8 x 1/2 x .023 1140 x 12.7 x .6 Matrix 8011638EW18 9405B38EW18 3/32"– 1/4," most metals

24 44-7/8 x 1/2 x .023 1140 x 12.7 x .6 Matrix 8011738EW24 9406B38EW24 up to 1/8," most metals

8/12 44-7/8 x 1/2 x .025 1140 x 12.7 x .6 M42 80143385EW812 9398B385EW812 3/8"– 1/2," metals, including stainless steel

10/14 44-7/8 x 1/2 x .025 1140 x 12.7 x .6 M42 80144385EW1014 9399B385EW1014 1/4" & larger, metals, including stainless steel

14 44-7/8 x 1/2 x .025 1140 x 12.7 x .6 M42 80145385EW14 9400B385EW14 3/16"– 3/8," metals, including stainless steel

14/18 44-7/8 x 1/2 x .025 1140 x 12.7 x .6 M42 80142385EW1418 9401B385EW1418 1/8"– 5/16," metals, including stainless steel

18 44-7/8 x 1/2 x .025 1140 x 12.7 x .6 M42 82310385EW18 9402B385EW18 3/32"– 1/4," metals, including stainless steel

long lasting

High speed steel teeth provide a strong, long lasting cutting edge

shattEr rEsistant

Bi-metal blades bend and resist breaking and extend blade life

ExcEptional valuE

Professional performance and competitive pricing provide extraordinary

cost-per-cut value

LENGTH X WIDTH X THICKNESS 1-PACK 5-PACK 25-PACK APPLICATION

TPI IN MM PROD NO PROD NO PROD NO

10/14 44-7/8 x 1/2 x .020 1140 x 12.7 x .5 3842838PW10141 8009838PW10145 3842338PW1014 1/4" & larger

14 44-7/8 x 1/2 x .020 1140 x 12.7 x .5 3842938PW141 8010738PW145 3842438PW14 3/16"– 3/8"

14/18 44-7/8 x 1/2 x .020 1140 x 12.7 x .5 3843038PW14181 8009938PW14185 3842738PW1418 1/8"– 5/16"

18 44-7/8 x 1/2 x .020 1140 x 12.7 x .5 3843138PW181 8010838PW185 3842538PW18 3/32"– 1/4"

24 44-7/8 x 1/2 x .020 1140 x 12.7 x .5 3843238PW241 8010938PW245 3842638PW24 up to 1/8"

COMPACT PORTABLE BAND SAW BLADES

10/14 35-3/8 x 1/2 x .020 900 x 13 x .50 1786692 1786673 1786678 1/4" (6mm) & larger

14 35-3/8 x 1/2 x .020 900 x 13 x .50 1786693 1786674 1786679 3/16" (5mm)– 3/8" (10mm)

18 35-3/8 x 1/2 x .020 900 x 13 x .50 1786695 1786675 1786680 3/32" (2mm)– 1/4" (6mm)

24 35-3/8 x 1/2 x .020 900 x 13 x .50 1786660 1786676 1786761 up to 1/8" (3,2mm)

TUFF

TOOTH®

PORTABLE BAND SAW BLADES

Bi-metal ................................................................... 28

High Carbon Steel & LENOX DIamOnD™ Grit ..... 29

Carbide Grit, Jig Saw Blade Sets &

Air Saw Blades .................................................30

Metal Cutting Circular Saw Blades ...................... 31

jig SAw BLADES

Customer Service 800-628-8810

28

WOOD CUTTING

6 4 102 Milled 20329BT486J 20652F486J — Fast, rough cut U111DF

6 4 102 Ground 20337BT456J —20784B456J Very fast, clean cut U101DF

6 6 102 Milled 20331BT686J — — Fast cut —

10 4102 Milled 20328BT480J 20654F480J —Fast, nail-embedded

wood —

10 4102 Ground 20335BT450J 20648F450J 20702B450J Clean, smooth cut U101BF

10D 4102 Ground 20336BT450JR —20791B450JR Down cut —

20 2 -3/4 69.9 Ground 20333BT320JC — — Scroll cut, laminates U1A0F

METAL

CUTTING

14 3 -5/8 92.1 Milled 20321BT314J 20641F314J 20705B314J Thick metal U118B/U118BF

18 3 -5/8 92.1 Milled 20322BT318J 20643F318J 20706B318J Medium metal U118E/U118EF

18 5 -1/4 133.4 Milled 20330BT518J ——Medium metal —

24 3 -5/8 92.1 Milled 20323BT324J 20644F324J 20707B324J Thin metal U118A /U118AF

32 3 -5/8 92.1 Milled 20609BT332J — — Very thin metal U118G/U118GF

COMPETITIVE

CROSS

REFERENCE

LENGTH U-SHANK 2-PACK 5-PACK 25-PACK APPLICATION

TPI IN MM PROCESS PROD NO PROD NO PROD NO BOSCH®

COMPETITIVE

CROSS

REFERENCE

LENGTH T-SHANK 2-PACK 5-PACK 25-PACK APPLICATION

TPI IN MM PROCESS PROD NO PROD NO PROD NO BOSCH®

WOOD CUTTING

64102 Milled 20305BT406S —20812B406S Fast, rough cut T144DF

6 4 102 Ground 20315BT456S 20850F456S 20781B456S Very fast, clean cut

6 6 102 Milled 20309BT686S Fast cut

10 4102 Milled 20306BT410S 20851F410S 20813B410S Fast, nail-embedded

wood T127DF

10 4102 Ground 20313BT450S 20842F450S 20814B450S Clean, smooth cut T101BF

10D 4102 Ground 20314BT450SR 20843F450SR 20782B450SR Down cut T101BRF

20 3 -1/4 82.5 Ground 20311BT320SC — — Scroll cut, laminates T101AOF

METAL

CUTTING

14 3 -5/8 92.1 Milled 20301BT314S 20832F314S 20815B314S Thick metal T188BF/T118B

18 3 -5/8 92.1 Milled 20302BT318S 20834F318S 20816B318S Medium metal T118EF

18 5 -1/4 133.4 Milled 20308BT518S 20854F518S —Medium metal T318B

24 3 -5/8 92.1 Milled 20303BT324S 20835F324S 20817B324S Thin metal T118A / T118AF

32 3 -5/8 92.1 Milled 20803BT332S — — Very thin metal T118G

BI-meTAl jIG SAW BlAdeS

Ideal for Woodworking and Metal Cutting

T-SHANK UNIVERSAL

SHANK

prEcision cutting

Super sharp to cut fast without deflection

smooth finish

Ground to precision sharpness for straight cuts

and a smooth finish

idEal for WoodWorking

Designed for optimal performance in wood cutting,

including hardwoods

shattEr rEsistant

Bi-metal technology flexes and resists breaking

and extends blade life

BOSCH is a registered trademark of Robert Bosch Tool Corporation

JIG SAW BLADES

T-SHANK UNIVERSAL

SHANK

T-SHANK UNIVERSAL

SHANK

29

lenoxtools.com

6 4 102 Milled 20755CTS406J — — Fast, rough cut U111D

6 4 102 Ground 20756CT456J —20794BC456J Very fast, clean cut U101D

63-5/8 92.1 Ground 20334CT416JC — — Scroll cut U244D

10 4102 Ground 20757CT450J —20795BC450J Clean, smooth cut U101B

10D 4102 Ground 20758CT450JR — — Down cut U101BR

20 2-3/4 69.9 Ground 20759CT320JC —20797BC320JC Scroll cut, laminates U101A0

lenox DiAmOND™ GRIT jIG SAW BlAde

hIGh CARBon STeel jIG SAW BlAdeS

Ideal for Woodworking

T-SHANK UNIVERSAL

SHANK

prEcision cutting

Super sharp to cut fast without deflection

smooth finish

Ground to precision sharpness for straight cuts and

a smooth finish

idEal for WoodWorking

Designed for optimal performance in wood cutting,

including hardwoods

COMPETITIVE

CROSS

REFERENCE

LENGTH T-SHANK 2-PACK 5-PACK 25-PACK APPLICATION

TPI IN MM PROCESS PROD NO PROD NO PROD NO BOSCH®

6 4 102 Milled 20750CTS406S 20298CFS406S — Fast, rough cut T111C

6 4 102 Ground 20751CT456S 20297CF456S 20292BC456S Very fast, clean T101D

63-5/8 92.1 Ground 20312CT416SC — — Scroll cut T244D

10 4102 Ground 20752CT450S 20296CF450S 20291BC450S Clean, smooth cut T101B

10D 4102 Ground 20753CT450SR 20295CF450SR 20290BC450SR Down cut T101BR

20 3-1/4 82.5 Ground 20754CT320SC 20299CF320SC 20294BC320SC Scroll cut, laminates T101AO

LENGTH T-SHANK 1-PACK APPLICATION

TPI IN MM PROCESS PROD NO

Grit 3-1/2 88.9 Grit 12149 Ceramic Tile, Fiberglass

JIG SAW BLADES

COMPETITIVE

CROSS

REFERENCE

LENGTH U-SHANK 2-PACK 5-PACK 25-PACK APPLICATION

TPI IN MM PROCESS PROD NO PROD NO PROD NO BOSCH®

T-SHANK UNIVERSAL

SHANK

T-SHANK UNIVERSAL

SHANK

Customer Service 800-628-8810

30

AIR SAW BlAdeS

Maximum Durability for Pneumatic Machine Cutting

shattEr rEsistant

Bi-metal blades bend and resist breaking and

extend blade life

long lasting

High speed steel teeth provide a strong, long

lasting cutting edge

LENGTH X WIDTH X THICKNESS 5-PACK 25-PACK APPLICATION

TPI IN MM PROD NO PROD NO

18 4 x 1/2 x .025 102 x 12.7 x .6 20426418T 20423B418T For pneumatic machine

cutting applications in

automotive repair & sheet metal

24 4 x 1/2 x .025 102 x 12.7 x .6 20427424T 20424B424T

32 4 x 1/2 x .025 102 x 12.7 x .6 20428432T 20425B432T

jIG SAW BlAde SeTS

CARBIde GRIT jIG SAW BlAdeS

COMPETITIVE CROSS

REFERENCE

LENGTH SHAPE 2-PACK 5-PACK APPLICATION

TPI IN MM T-SHANK PROCESS PROD NO PROD NO BOSCH®

Grit 3-1/2 88.9 Grit 20300GT300S 20830F300SG Ceramic Tile T130RF3

U-SHANK

Grit 3-1/2 88.9 Grit 20320GT300J —Ceramic Tile —

BOSCH is a registered trademark of Robert Bosch Tool Corporation

20868U743SA

7 PIECE T-SHANK

BI-METAL SET

456S, 450SR, 450S,

406S, 324S, 318S, 314S

VINYL POUCH

20606U743JA

7 PIECE U-SHANK

BI-METAL SET

456J, 450JR, 450J,

406J, 324J, 318J, 314J

VINYL POUCH

20764C543SA

5 PIECE T-SHANK

MULTI-PURPOSE SET

456S, 450S, 324S,

320SC, 318S

BLISTER PACK

20769C543JA

5 PIECE U-SHANK

MULTI-PURPOSE SET

456J, 450J, 324J,

320JC, 318J

BLISTER PACK

High Carbon Steel Sets

JIG SAW BLADES

Bi-Metal Sets

31

lenoxtools.com

meTAl CuTTInG CIRCulAR SAW BlAdeS

A Faster Way to Cut Metal™

DIAMETER PROD NO TOOTH COUNT RPM ARBOR APPLICATION

IN MM IN MM

STEEL

5-3/8 135 21876ST538030CT 30 3500 —20

Structurals

Thick walled pipe

Threaded rod

Channel steel

Plate

Solid steel

6-3/4 171 21878ST634040CT 40 5800 —20

7180 21879ST700038CT 38 4300 —20

7-1/4 184 21881ST714040CT 40 5800 5/8 16

8203 21884ST800050CT 50 5800 5/8 16

9230 21885ST900048CT 48 5200 125.4

10 254 21886ST100052CT 52 5200 5/8 16

12 305 21888ST120060CT 60 1500 125.4

14 355 21891ST140080CT 80 1800 125.4

THIN STEEL

6-1/2 165 21877TS612048CT 48 5800 5/8 16 Sheet metal

Thin walled pipe

Metal roofing

Metal decking

7180 21880TS700068CT 68 4300 —20

7-1/4 184 21883TS714068CT 68 5800 5/8 16

12 305 21890TS120080CT 80 1500 125.4

14 355 21893TS140090CT 90 1800 125.4

ALUMINUM

7-1/4 184 21882AL714060CT 60 5800 5/8 16 Aluminum

Copper

Brass

10 254 21887AL100080CT 80 5200 5/8 16

12 305 21889AL120080CT 80 4000 125.4

14 355 21892AL140080CT 80 3000 125.4

CIRCULAR SAW BLADES

ExtEndEd lifE

Titanium carbide tipped

Resists material build-up on teeth

clEan, cool cuts

Less burr than abrasive blades

No need for secondary grinding

Reduced material burning

modifiEd triplE chip grind

For added durability

rEsharpEnablE

hOLE SAwS

Bi-metal SPEED SLOT® Hole Saws ............. 34, 35

SnaP-Back™ Arbors &

Quick Change Extensions .................................... 36

Standard Arbors & Accessories .......................... 37

Bi-metal Kits .................................................... 38, 39

Carbide Tipped & Kits ........................................... 40

Carbide Grit & Kits .................................................41

LENOX® DIamOnD™ ............................................ 42

Carbide Hole Cutters &

LENOX PROTOOL LUBE® ....................................43

OnE TOOTH® Rough Wood Hole Cutters ......... 44

Carbide Grit Recessed Lighting & Hole Saw

Selection Guide ..................................................... 45

Recommended Hole Saw RPM .......................... 46

Customer Service 800-628-8810

34

BI-meTAl SPEED SLOt® hole SAWS

Long Lasting, Fast Cutting and Versatile

DIAMETER 1 PER BOX 1 PER BLISTER SEAL 1 PACK ARBORED PIPE TAP PIPE ENTRANCE USE ARBOR

IN MM PROD NO PROD NO PROD NO IN MM IN MM snap-back™STANDARD

9/16 14.3 300099L 1787781 1772423 — — — — 5L 1L, 4L or 5L

5/8 15.9 3001010L 1771823 1772424 — — — — 5L 1L, 4L or 5L

11/16 17.5 3001111L 1787773 1772425 — — — — 5L 1L, 4L or 5L

3/4 19.1 3001212L 1771952 1772426 1/2 12.7 3/8 9.5 5L 1L, 4L or 5L

25/32 19.8 3009820

MMHS

1771962 1772427 — — — — 5L 1L, 4L or 5L

13/16 20.6 3001313L 1787775 1772428 — — — — 5L 1L, 4L or 5L

7/8 22.2 3001414L 1771953 1772429 3/4 19.1 1/2 12.7 5L 1L, 4L or 5L

15/16 23.8 3001515L 1787776 1772430 — — — — 5L 1L, 4L or 5L

125.4 3001616L 1771954 1772481 — — — — 5L 1L, 4L or 5L

1-1/16 27.0 3001717L 1771955 1772482 — — — — 5L 1L, 4L or 5L

1-1/8 28.6 3001818L 1771959 1772483 125.4 3/4 19.1 5L 1L, 4L or 5L

1-3/16 30.2 3001919L 1787777 1772474 — — — — 5L 1L, 4L or 5L

1-1/4 31.8 3002020L 1771960 1772491 — — — — 2L, 6L 2L, 3L or 6L

1-5/16 33.3 3002121L 1787778 1772492 — — — — 2L, 6L 2L, 3L or 6L

1-3/8 34.9 3002222L 1771961 1772727 — — 1 25.4 2L, 6L 2L, 3L or 6L

1-7/16 36.5 3002323L 1787779 1772728 — — — — 2L, 6L 2L, 3L or 6L

1-1/2 38.1 3002424L 1771963 1772729 1-1/4 31.8 — — 2L, 6L 2L, 3L, 6L or 7L

1-9/16 39.7 3002525L 1787780 1772730 — — — — 2L, 6L 2L, 3L, 6L or 7L

1-5/8 41.3 3002626L 1771964 1772931 — — — — 2L, 6L 2L, 3L, 6L or 7L

1-11/16 42.9 3002727L 1787800 1772932 — — — — 2L, 6L 2L, 3L, 6L or 7L

1-3/4 44.5 3002828L 1771967 1772933 1-1/2 38.1 1-1/4 31.8 2L, 6L 2L, 3L, 6L or 7L

1-13/16 46.0 3002929L 1787841 1772935 — — — — 2L, 6L 2L, 3L, 6L or 7L

1-7/8 47.6 3003030L 1771968 1772778 — — — — 2L, 6L 2L, 3L, 6L or 7L

250.8 3003232L 1771970 1772779 — — 1-1/2 38.1 2L, 6L 2L, 3L, 6L or 7L

2-1/16 52.4 3003333L 1787842 1772780 — — — — 2L, 6L 2L, 3L, 6L or 7L

2-1/8 54.0 3003434L 1772003 1772951 — — — — 2L, 6L 2L, 3L, 6L or 7L

2-1/4 57.2 3003636L 1771983 1772952 250.8 — — 2L, 6L 2L, 3L, 6L or 7L

2-3/8 60.3 3003838L 1771984 1772953 — — — — 2L, 6L 2L, 3L, 6L or 7L

2-1/2 63.5 3004040L 1771987 1772954 — — 2 50.8 2L, 6L 2L, 3L, 6L or 7L

2-9/16 65.1 3004141L 1787843 1772955 — — — — 2L, 6L 2L, 3L, 6L or 7L

2-5/8 66.7 3004242L 1771988 1772956 2-1/2 63.5 — — 2L, 6L 2L, 3L, 6L or 7L

2-11/16 68.3 3004343L 1771989 — — — — — 2L, 6L 2L, 3L, 6L or 7L

plug rEmoval as Easy as 1-2-3

SPEED SLOT features a staircase design for easy plug removal

up to 2x lifE in mEtal cutting

Enhanced tooth geometry, a thin kerf design, and an advanced

coating contribute to the efficiency of the cutting process

3

21

HOLE SAWS

35

lenoxtools.com

ConTRACToR’S hole SAW 5 PACkS

DIAMETER 1 PER BOX 1 PER BLISTER SEAL 1 PACK ARBORED PIPE TAP PIPE ENTRANCE USE ARBOR

IN MM PROD NO PROD NO PROD NO IN MM IN MM snap-back STANDARD

2-3/4 69.9 3004444L 1771990 1772961 — — — — 2L, 6L 2L, 3L, 6L or 7L

2-7/8 73.0 3004646L 1787844 1772962 — — — — 2L, 6L 2L, 3L, 6L or 7L

376.2 3004848L 1772021 1772963 — — 2-1/2 63.5 2L, 6L 2L, 3L, 6L or 7L

3-1/8 79.4 3005050L 1772022 1772964 — — — — 2L, 6L 2L, 3L, 6L or 7L

3-1/4 82.6 3005252L 1772023 1772966 376.2 — — 2L, 6L 2L, 3L, 6L or 7L

3-3/8 85.7 3005454L 1787845 1772945 — — — — 2L, 6L 2L, 3L, 6L or 7L

3-1/2 88.9 3005656L 1772012 1772946 — — — — 2L, 6L 2L, 3L, 6L or 7L

3-5/8 92.1 3005858L 1772013 1772949 — — 3 76.2 2L, 6L 2L, 3L, 6L or 7L

3-3/4 95.3 3006060L 1787846 1772950 3-1/2 85.7 — — 2L, 6L 2L, 3L, 6L or 7L

3-7/8 98.4 3006262L 1787847 1773001 — — — — 2L, 6L 2L, 3L, 6L or 7L

4101.6 3006464L 1772014 1773002 — — — — 2L, 6L 2L, 3L, 6L or 7L

4-1/8 104.8 3006666L 1772018 1773003 — — 3-1/2 85.7 2L, 6L 2L, 3L, 6L or 7L

4-1/4 108.0 3006868L 1772019 1773004 495.3 — — 2L, 6L 2L, 3L, 6L or 7L

4-3/8 111.1 3007070L 1787848 1773005 — — — — 2L, 6L 2L, 3L, 6L or 7L

4-1/2 114.3 3007272L 1772075 1773006 — — — — 2L, 6L 2L, 3L, 6L or 7L

4-5/8 117.5 3007474L 1787850 — — — 4 95.3 2L, 6L 2L, 3L, 6L or 7L

4-3/4 120.7 3007676L 1772076 1773008 4-1/2 108.0 — — 2L, 6L 2L, 3L, 6L or 7L

5127.0 3008080L 1772077 — — — — — 2L, 6L 2L, 3L, 6L or 7L

5-1/2 139.7 3008888L 1787785 — — — — — 2L, 6L 2L, 3L, 6L or 7L

6152.4 3009696L 1772121 — — — — — 2L, 6L 2L, 3L, 6L or 7L

PROD NO IN MM

10735B14L 7/8 22.2

10736B16L 125.4

10737B18L 1-1/8 28.6

10738B20L 1-1/4 31.8

10739B22L 1-3/8 34.9

10740B24L 1-1/2 38.1

10741B28L 1-3/4 44.5

10742B32L 250.8

valuE & convEniEncE

Unique packaging provides value and

convenience for high volume users

HOLE SAWS

Customer Service 800-628-8810

36

SNAP-BACk™ ARBoRS

No Tools. No Adaptors. No Screwing Around.

Pull Twist Snap

PROD NO DESC FITS HOLE SAWS SIZES THREAD SIZE SHANK TYPE SHANK SIZE

IN MM IN MM

1779772 2L 20L-9 6L 1-1/4–6 31.8–152.4 5/8–18 Solid Hex 1/2 & larger 12.7 & larger

1779669 5L 9L-19L 9/16–1-3/16 14–30 1/2–20 Solid Hex 3/8 & larger 9.5 & larger

1779670 6L 20L-96L 1-1/4–6 31.8–152.4 5/8–18 Solid Hex 3/8 & larger 9.5 & larger

quick changE

Faster and easier to engage/disengage hole saw

prEvEnts thrEads from stripping

Drives off pins, not threads

no tools nEEdEd

Prevents hole saw from locking on arbor

no adaptor rEquirEd

Arbor threads directly into all hole saws

EasiEr plug rEmoval

™

ARBORS

2L 5L 6L

Solid Hex

SNAP-BACk QuICk ChAnGe exTenSIonS

durability and ExtEndEd lifE

Carbon steel collar and shaft for durability and extended life

onE-handEd rElEasE

SnaP-Back Quick Change mechanism for quick and easy release

bit hEld sEcurEly in placE

Patented jaw design holds bits securely on 6-flatted shanks and ball

detent bits

PROD NO IN MM CHUCK SIZE FITS ARBOR

IN MM SNAP-BACK STANDARD

1852050 5-1/2 140 7/16 11 2L 1L, 2L, 3L

1852047 12 305 3/8 9.5 5L, 6L 5L, 6L, 7L

1852048 12 305 7/16 11 2L 1L, 2L, 3L

1852049 18 457 7/16 11 2L 1L, 2L, 3L

1852050 1852047 1852048 1852049

ARBORS & EXTENSIONS

™

37

lenoxtools.com

STAndARd ARBoRS & ACCeSSoRIeS

Arbors & Accessories for All Your Drilling Needs

CHUCK SIZE FITS ARBOR

PROD NO DESCRIPTION IN MM snap back SOLID HEX HOLLOW HEX

ACCESSORIES

1779771 4-1/4" Pilot Drill (1 pack) 1/4 6.4 —1L, 4L 2L

1779841 4-1/4" Pilot Drill (25 pack) 1/4 6.4 —1L, 4L 2L

1779810 3-1/4" Pilot Drill (1 pack) 1/4 6.4 2L, 5L, 6L 2L, 3L, 5L, 6L, 7L —

1864904 3-1/4" Pilot Drill (25/pack) 1/4 6.4 2L, 5L, 6L 2L, 3L, 5L, 6L, 7L —

30297123CT Carbide Tipped Pilot Drill (1 pack) 1/4 6.4 —1L, 4L 2L

3029865CTPD Carbide Tipped Pilot Drill (1pack) 1/4 6.4 2L,5L, 6L 2L, 3L, 5L, 6L, 7L —

30857A A1 Arbor Adaptor (1 pack) — — 5L 1L, 4L, 5L —

3084818X 18" Extension (1 pack) 1/2 & larger 12.7 & larger 2L 1L, 2L, 3L 2L

3084712 X 12" Extension (1 pack) 1/2 & larger 12.7 & larger 2L 1L, 2L, 3L 2L

3084310X* 10" Extension (1 pack) 3/8 & larger 9.5 & larger 5L, 6L 5L, 6L, 7L —

3084655X 5-1/2" Extension (1 pack) 1/2 & larger 12.7 & larger 2L 1L, 2L, 3L 2L

2910114 1/4" x 1/4" Set Screw — — 2L, 5L, 6L 2L, 3L, 5L, 6L, 7L 2L

29102516 5/16" x 5/16" Set Screw — — — 1L, 4L, Extension

* Fits arbored hole saws

addEd durability

Hardened carbon steel for strength

starts on contact

Split point pilot drill for faster penetration and

less walking

1779810 1779771 123CT 65CTPD 55x 10x 12x 18x1L 2L 3L 4L 5L 6L 7L

FITS HOLE SIZES SHANK SHANK SIZE

PROD NO DESC SAWS IN MM TYPE IN MM PRIMARY FEATURE

1779774 1L 9L–19L 9/16–1-3/16 14.3–30.2 Hollow Hex 1/2 & larger 12.7 & larger Adjustable pilot bit

1779801 2L 20L–96L 1-1/4–6 31.8–152.4 Solid Hex 1/2 & larger 12.7 & larger Use for enlarging holes

1856058 2L 20L–96L 1-1/4 –6 31.8–152.4 Hollow Hex 1/2 & larger 12.7 & larger Use for enlarging holes, adjustable pilot bit

1779802 3L 20L–96L 1-1/4 – 6 31.8–152.4 Solid Hex 1/2 & larger 12.7 & larger Solid shank

1779803 4L 9L–19L 9/16–1-3/16 14.3–30.2 3 Sided 1/4 & larger 6.4 & larger Adjustable pilot bit, 3 flats on shank

1779804 5L 9L–19L 9/16–1-3/16 14.3–30.2 Hex 3/8 & larger 9.5 & larger Use for 9A-19A arbored hole saws

1779805 6L 20L–96L 1-1/4 – 6 31.8–152.4 Hex 3/8 & larger 9.5 & larger Quick change arbor

1779806 7L 24L–96L 1-1/2– 6 31.8–152.4 Hex 3/8 & larger 9.5 & larger Plug ejection feature

LENOX 6L Arbor with quick

change feature (product no 1779805)

2L

Solid HexHollow Hex

ARBORS & ACCESSORIES

AA1

Customer Service 800-628-8810

38

BI-meTAl hole SAW kITS

Convenient Storage for Trade-Specific Uses

durablE

Durable construction resists damage caused

by drops and tough workplace environments

sEcurE

Latches close case tightly and securely.

Lockable with standard padlocks

long lasting

Metal latches and metal pin hinges won’t break or tear COMPACT KIT

4-11/16"h x 7-1/2"w

MEDIUM KIT

8"h x 11"w

LARGE KIT

10"h x 14"w

CONTRACTOR’S KITS

™

ARBORS

30374500G

9 PIECE KIT

2-1/8", 2-9/16", 3-1/4", 3-3/4", 4-3/4"

SNAP-BACK Arbor: 2L

Three pilot drills

LARGE KIT

308042000G

26 PIECE KIT–big daddy ™

3/4", 7/8", 1", 1-1/8", 1-3/8", 1-1/2",

1-3/4", 2", 2-1/8", 2-1/4", 2-1/2",

2-11/16", 3", 3-1/4", 3-3/8", 3-5/8",

3-3/4", 4-1/8", 4-1/2", 4-3/4"

SNAP-BACK Arbors: 2L, 5L

Arbor: 1L. Three pilot drills

LARGE KIT

30370400G

5 PIECE KIT

2", 3", 3-3/8", 4-1/8"

SNAP-BACK Arbor: 2L

LARGE KIT

308201200G

17 PIECE KIT

5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4",

1-3/8", 1-1/2", 1-3/4",

2", 2-1/2", 3"

SNAP-BACK Arbor: 2L

Arbor: 1L. Three pilot drills

LARGE KIT

30807700G

9 PIECE KIT

7/8", 1", 1-1/4", 1-3/8",

1-1/2", 1-3/4", 2-1/8"

SNAP-BACK Arbors: 5L, 6L

MEDIUM KIT

1815140

7 PIECE KIT

7/8", 1-1/8", 1-3/8", 1-1/2", 2"

SNAP-BACK Arbors: 2L, 5L

MINI KIT

HOLE SAW KITS

MINI KIT

9"h x 5"w

39

lenoxtools.com HOLE SAW KITS

ELECTRICIAN’S KITS PLUMBER’S KITS

REFRIGERATION KIT AUTOMOTIVE KITWELDER'S KIT

14789600W

9 PIECE KIT

3/4", 7/8", 1", 1-1/4",

1-1/2", 2"

SNAP-BACK Arbors:

2L, 5L

One arbor adaptor

MEDIUM KIT

30805500A

7 PIECE KIT

3/4", 7/8", 1",

1-1/8", 1-1/4"

Arbor: 5L

One arbor adaptor

COMPACT KIT

30830600R

8 PIECE KIT

5/8", 7/8", 1-1/8"

1-3/8", 1-5/8", 2-1/8"

SNAP-BACK Arbors:

5L, 6L

MEDIUM KIT

308021200L

17 PIECE KIT

3/4", 7/8", 1-1/8", 1-3/8", 1-3/4", 2",

2-1/2", 2-11/16", 3", 3-5/8", 4-1/8", 4-3/4".

SNAP-BACK Arbors: 2L, 5L

Three pilot drills

LARGE KIT 308011200P

17 PIECE KIT

3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4",

2-9/16", 3", 3-1/2", 4", 4-1/4", 4-1/2"

SNAP-BACK Arbors: 2L, 5L

Three pilot drills

LARGE KIT

30860C600P

9 PIECE KIT

3/4", 7/8", 1-1/8", 1-3/8", 2", 2-1/2"

SNAP-BACK Arbors: 2L, 5L

One arbor adaptor

MEDIUM KIT

30856C600L

9 PIECE KIT

7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2"

SNAP-BACK Arbors: 2L, 5L

One arbor adaptor

MEDIUM KIT

30800600L

10 PIECE KIT

7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2"

SNAP-BACK Arbors: 2L, 5L

One pilot drill

One arbor adaptor

LARGE KIT

30808600P

10 PIECE KIT

3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4"

SNAP-BACK Arbors: 2L, 5L

One pilot drill

One arbor adaptor

LARGE KIT

1815195

7 PIECE KIT

1-1/4", 1-3/8", 1-1/2", 2", 2-1/2"

SNAP-BACK Arbors: 2L, 5L

MINI KIT

1815139

8 PIECE KIT

7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2"

SNAP-BACK Arbors: 2L, 5L

MINI KIT

1853786

10 PIECE KIT

2-1/8", 2-1/4", 2-9/16", 2-3/4",

3-5/8", 4", 4-5/8"

SNAP-BACK Arbor: 2L

Two pilot drills

LARGE KIT

Customer Service 800-628-8810

40 HOLE SAWS

CARBIde TIPPed hole SAWS

Designed for Cutting Tile and Stainless Steel

1 PER PACK DIAMETER PIPE TAP PIPE ENTRANCE USE ARBOR

PROD NO IN MM IN MM IN MM snap-back STANDARD

3021111CT 11/16 17.5 — — — — 5L 1L ,4L, 5L

3021212CT 3/4 19.1 1/2 12.7 3/8 9.5 5L 1L ,4L, 5L

3021414CT 7/8 22.2 3/4 19.1 1/2 12.7 5L 1L ,4L, 5L

3021616CT 125.4 — — — — 5L 1L ,4L, 5L

3021818CT 1-1/8 28.6 125.4 3/4 19.1 5L 1L ,4L, 5L

3022020CT 1-1/4 31.8 — — — — 2L 2L, 3L 6L

3022222CT 1-3/8 34.9 — — 1 25.4 2L 2L, 3L 6L

3022424CT 1-1/2 38.1 1-1/4 31.8 — — 2L 2L, 3L, 6L, 7L

3022626CT 1-5/8 41.3 — — — — 2L 2L, 3L, 6L, 7L

3022828CT 1-3/4 44.5 1-1/2 38.1 1-1/4 31.8 2L 2L, 3L, 6L, 7L

3023232CT 250.8 — — 1-1/2 38.1 2L 2L, 3L, 6L, 7L

3023434CT 2-1/8 54.0 — — — — 2L 2L, 3L, 6L, 7L

3023636CT 2-1/4 57.2 250.8 — — 2L 2L, 3L, 6L, 7L

3023838CT 2-3/8 60.3 — — — — 2L 2L, 3L, 6L, 7L

3024040CT 2-1/2 63.5 — — 2 50.8 2L 2L, 3L, 6L, 7L

3024141CT 2-9/16 65.1 — — — — 2L 2L, 3L, 6L, 7L

3024242CT 2-5/8 66.7 2-1/2 63.5 — — 2L 2L, 3L, 6L, 7L

3024343CT 2-11/16 68.3 — — — — 2L 2L, 3L, 6L, 7L

3024848CT 376.2 — — 2-1/2 63.5 2L 2L, 3L, 6L, 7L

3025252CT 3-1/4 82.6 376.2 — — 2L 2L, 3L, 6L, 7L

3025454CT 3-3/8 85.7 — — — — 2L 2L, 3L, 6L, 7L

3025656CT 3-1/2 88.9 — — — — 2L 2L, 3L, 6L, 7L

3025858CT 3-5/8 92.1 — — 3 76.2 2L 2L, 3L, 6L, 7L

3026060CT 3-3/4 95.3 3-1/2 88.9 — — 2L 2L, 3L, 6L, 7L

3026464CT 4101.6 — — — — 2L 2L, 3L, 6L, 7L

3026666CT 4-1/8 104.8 — — 3-1/2 88.9 2L 2L, 3L, 6L, 7L

3026868CT 4-1/4 108.0 4101.6 — — 2L 2L, 3L, 6L, 7L

3027272CT 4-1/2 114.3 — — — — 2L 2L, 3L, 6L, 7L

3027676CT 4-3/4 120.7 4-1/2 114.3 4101.6 2L 2L, 3L, 6L, 7L

3028080CT 5127.0 — — — — 2L 2L, 3L, 6L, 7L

3028888CT 5-1/2 139.7 — — — — 2L 2L, 3L, 6L, 7L

3029696CT 6152.4 — — — — 2L 2L, 3L, 6L, 7L

Recommended RPM for each Carbide Tipped Hole Saw on page 46

Note: We recommend the use of a carbide tipped pilot drill when cutting ceramic wall tile.

Pilot drill 123CT fits the SNAP-BACK 2L or standard arbors 1L, 2L, 4L or 7L. Pilot drill 65CTPD fits the

SNAP-BACK 2L or standard arbors 5L and 6L. See pages 36-37.

long tool lifE

Heat resistant carbide teeth for long life in tile and

stainless steel

addEd durability

Thick backing plate resists damage and increases life

uniquE tooth configuration

Engineered design provides ability to cut in stainless

steel like no other

usE standard arbor or snap-back™ arbor

30295600CTL

8 PIECE

7/8", 1-1/8", 1-3/8", 1-3/4",

2", 2-1/2"

SNAP-BACK Arbor: 2L

Arbor: 1L

MEDIUM KIT

30294600CTP

8 PIECE

3/4", 7/8", 1-1/8", 1-1/2",

1-3/4", 2-1/4"

SNAP-BACK Arbor: 2L

Arbor: 1L

MEDIUM KIT

302901100CTG

15 PIECE

3/4", 7/8", 1", 1-1/8", 1-1/4",

1-3/8", 1-1/2", 1-3/4", 2",

2-9/16", 3"

SNAP-BACK Arbor: 2L

Arbor: 1L

Two pilot drills

LARGE KIT

ELECTRICIAN’S KIT

PLUMBER’S KIT

CONTRACTOR’S KIT

41

lenoxtools.com HOLE SAWS

CARBIde GRIT hole SAWS

Best for Cutting Abrasive Materials

1 PER BOX DIAMETER PIPE TAP PIPE ENTRANCE USE ARBOR

PROD NO IN MM IN MM IN MM snap-back STANDARD

2991212CG 3/4 19.1 1/2 12.7 3/8 9.5 1L, 4L

2999820MMCG 25/32 19.8 — — — — 1L, 4L

2991414CG 7/8 22.2 3/4 19.1 1/2 12.7 1L, 4L

2991616CG 125.4 — — — — 1L, 4L

2991818CG 1-1/8 28.6 125.4 3/4 19.1 1L, 4L

2992020CG 1-1/4 31.8 — — — — 2L 2L

2992222CG 1-3/8 34.9 — — 1 25.4 2L 2L

2992424CG 1-1/2 38.1 1-1/4 31.8 — — 2L 2L, 7L

2992828CG 1-3/4 44.5 1-1/2 38.1 1-1/4 31.8 2L 2L, 7L

2993232CG 250.8 — — 1-1/2 38.1 2L 2L, 7L

2993434CG 2-1/8 54 — — — — 2L 2L, 7L

2993636CG 2-1/4 57.2 250.8 — — 2L 2L, 7L

2993838CG 2-3/8 60.3 — — — — 2L 2L, 7L

2994040CG 2-1/2 63.5 — — 2 50.8 2L 2L, 7L

2994141CG 2-9/16 65.1 — — — — 2L 2L, 7L

2994848CG 376.2 — — 2-1/2 63.5 2L 2L, 7L

2995252CG 3-1/4 82.6 376.2 — — 2L 2L, 7L

2995858CG 3-5/8 92.1 — — 3 76.2 2L 2L, 7L

2996464CG 4101.6 — — — — 2L 2L, 7L

2996666CG 4-1/8 104.8 — — 3-1/2 88.9 2L 2L, 7L

cuts abrasivE matErials

Tungsten carbide grit cuts through fiberglass,

ceramic tile, laminates and other abrasive materials

clEan cutting

Carbide grit edge will not snag or chip when cutting

thin materials

usE standard arbor or snap-back™ arbor

29984600CGP

9 PIECE

3/4", 7/8", 1-1/8", 1-1/2",

2-1/8", 2-9/16"

SNAP-BACK Arbor: 2L

Arbor: 1L. One arbor adaptor

MEDIUM KIT

29985700CGK

10 PIECE

7/8", 1", 1-1/4", 1-3/8", 1-1/2",

1-3/4", 2-1/8"

SNAP-BACK Arbor: 2L

Arbor: 1L. One arbor adaptor

MEDIUM KIT

PLUMBER’S KIT CONTRACTOR’S KIT

Customer Service 800-628-8810

42 HOLE SAWS

1 PER PACK PIPE TAP PIPE ENTRANCE

PROD NO IN MM IN MM IN MM

121063DGDS 3/16 5

121074DGDS 1/4 6

121085DGDS 5/16 8

121096DGDS 3/8 10

121108DGDS 1/2 13

1211110DGDS 5/8 16

1211212DGDS 3/4 19 3/4 13 3/8 10

1211416DGDS 125

1211622DGDS 1-3/8 35 125

12158DGDS4A 4 pc kit*

long lasting

Continuous, brazed edge lasts longer in tile and stone

fast, Easy cutting

Low torque, little pressure required

EasiEr plug rEmoval

Over-sized slot in hole saw for easy plug removal

lenox DiAmOND™ hole SAWS

More Holes. Less Time.

ONE PIECE HOLE SAWS

* Sizes: 3/16", 1/4", 5/16", 3/8"

long lasting

Brazed diamond edge for more holes in tile and stone

durablE

Robust design for greater durability in tough applications

fast cutting

Cuts holes in less time than carbide grit or carbide tipped hole saws

EasiEr plug rEmoval

Round holes make removing plugs faster and easier

usE standard arbor or snap-back™ arbor

STANDARD HOLE SAWS

1 PER PACK PIPE TAP PIPE ENTRANCE USE ARBOR

PROD NO IN MM IN MM IN MM snap-back STANDARD

1211314DGHS 7/8 22 3/4 19 1/2 13 5L 1L, 4L, 5L

1225618DGHS 1-1/8 29 125 3/4 19 5L 1L, 4L, 5L

1211520DGHS 1-1/4 32 2L, 6L 2L, 3L, 6L

1211722DGHS 1-3/8 35 125 2L, 6L 2L, 3L or 6L

1211824DGHS 1-1/2 38 1-1/4 32 2L, 6L 2L, 3L, 6L, 7L

1211932DGHS 251 1-1/2 38 2L, 6L 2L, 3L, 6L, 7L

1212040DGHS 2-1/2 64 251 2L, 6L 2L, 3L, 6L, 7L

Easier Plug

Removal

Diamond Edge

1856785

10 PIECE KIT

1/4", 3/4", 7/8", 1-1/8", 1-3/8",

2", 2-1/2"

SNAP-BACK Arbors: 2L, 5L

Hex Wrench

LARGE KIT

Easier Plug

Removal

No Arbor NeededDiamond Edge

43

lenoxtools.com CARBIDE HOLE CUTTERS

CARBIde hole CuTTeRS

Designed Specifically for Sheet Metal Hole Cutting

accuratE, burr-frEE holEs

Precision ground carbide teeth for fast cutting of clean, round holes

Will not damagE Work

Over-drill stopper prevents the tool from penetrating beyond the hole

starts on contact

Split point pilot bit for faster penetration and less walking

LENOX PROTOOL LUBE®

Extends Tool Life

ShortenS cutting time by up to 50%

Provides smoother, cleaner cutting and

dramatically longer tool life

reduceS heat and friction

Water soluble, so it cleans up with water

Biodegradable and non-toxic

Use this product as it comes from the container—do not mix with water.

MSDS available in hard copy or downloadable from lenoxtools.com

1 PER BOX DIAMETER CONDUIT USE ARBOR

PROD NO IN MM SIZE snap -back STANDARD

2009212CHC 3/4 19.1 3/8" 5L 5L

2009314CHC 7/8 22.2 1/2" 5L 5L

2009416CHC 1 25.4 —5L 5L

2009618CHC 1-1/8 28.6 3/4" 5L 5L

20097195CHC 1-7/32 30.9 —5L 5L

2009820CHC 1-1/4 31.8 — 3L, 6L

2010022CHC 1-3/8 34.9 1" 3L, 6L

2010224CHC 1-1/2 38.1 — 3L, 6L

2010328CHC 1-3/4 44.5 1-1/4" 3L, 6L

2010432CHC 2 50.8 1-1/2" 3L, 6L

2010534CHCt 2-1/8 54.0 — 3L, 6L

2010840CHC 2-1/2 63.5 2" 3L, 6L

2010942CHC 2-5/8 66.7 — 3L, 6L

2011344CHC 2-3/4 69.9 — 3L, 6L

2011448CHC 3 76.2 2-1/2" 3L, 6L

PROD NO DESCRIPTION

ACCESSORIES

3087935PD 1/4" Split point stubby pilot bit

308803CHCAS Plug ejection springs

300033L 3L, 1/2" Arbor for 20CHC – 48CHC. Solid hex shank

300055L 5L, 3/8" Arbor for 11CHC – 19.5CHC. Solid hex shank

12203K5LSC 5L SNAP-BACK Arbor

30877300CHC

12 PIECE KIT

7/8", 1-1/8", 1-3/8". Arbors: 3L, 5L

1/4" split point pilot bit. Plug ejection

springs, 1/8" hex wrench

COMPACT KIT

30878500CHC

15 PIECE KIT

7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2"

Arbors: 3L, 5L. 1/4" split point pilot bit

Plug ejection springs, 1/8" hex wrench

MEDIUM KIT

ELECTRICIAN’S KITS

PROD NO CONTAINER SIZE CONTAINERS

PER CASE NFPA CODE SPECS

GALLON LITER

68040LNX 6 oz .17 12 HMIS/WHMIS

HEALTH INDEX – 1

FLAMMABILIT Y – 0

REACTIVITY – 0

PERSONAL PROTECTION – A

68047 13.8 4

68048 518.9 —

68050 55 208.2 drum —

0

1 0

HEALTH

FIRE

REACTIVITY

SPECIAL HAZARD

Customer Service 800-628-8810

44 HOLE SAWS

ONE tOOth® RouGh Wood hole CuTTeR

Drills Faster Than Self-Feed Bits

1 PER PACK CUTTER SIZE CUTTING DEPTH APPLICATION USE ARBOR

PROD NO IN MM IN MM snap-back STANDARD

2542222HC 1-3/8 34.9 2-7/16" 62 1" pipe & lock installation 2L 2L, 3L

2543434HC 2-1/8 54.0 2-7/16" 62 1-1/2" pipe & lock installation 2L 2L, 3L

2543636HC 2-1/4 57.2 2-7/16" 62 1-1/2" pipe & 45°/90° bend couplings 2L 2L, 3L

2544141HC 2-9/16 65.1 2-7/16" 62 2" pipe 2L 2L, 3L

2544444HC 2-3/4 69.9 2-7/16" 62 2" pipe & 45°/90° bend couplings 2L 2L, 3L

2545454HC 3-3/8 85.7 2-7/16" 62 3" duct pipe & bendable duct pipe 2L 2L, 3L

2545656HC 3-5/8 92.1 2-7/16" 62 3" pipe 2L 2L, 3L

2546464HC 4101.6 2-7/16" 62 3" pipe & coupling & dryer vent 2L 2L, 3L

2546969HC 4-5/16 109.5 2-7/16" 62 4" duct pipe & bendable duct pipe 2L 2L, 3L

2547474HC 4-5/8 117.5 2-7/16" 62 4" pipe 2L 2L, 3L

2548080HC 5127.0 2-7/16" 62 4" pipe & coupling 2L 2L, 3L

2548787HC 5-1/2 139.7 2-7/16" 62 Toilet flange 2L 2L, 3L

2550000HC 6-1/4 158.8 2-7/16" 62 6" duct pipe 2L 2L, 3L

25310SB38 — — — — 3/8" stubby spade bit 2L 2L, 3L

25312DIAF1 — — — — Diamond file for re-sharpening

long lasting

High speed steel tooth provides long tool life

cuts fast / loW torquE

Designed to run at high speeds with very little torque

durablE Wood cutting tool

Cuts wet, frozen, pressure treated and hard wood without binding

Easy plug rEmoval

Patented design allows easy plug removal

cuts at an anglE

Unique design provides the ability to cut at an angle

usE standard arbor or snap-back™ arbor

For optimal performance usa a 3/8" Stubby Spade Bit with arbor

25476301G

7 PIECE

2-1/8", 2-9/16", 3-5/8"

SNAP-BACK Arbor: 2L, Diamond file

Two 3/8" stubby spade bits

LARGE KIT

25477701G

11 PIECE

2-1/8", 2-1/4", 2-9/16", 2-3/4",

3-5/8", 4", 4-5/8"

SNAP-BACK Arbor: 2L, Diamond file

Two 3/8" stubby spade bits

LARGE KIT

45

lenoxtools.com HOLE SAWS

1 PER BOX DIAMETER FOR FIXTURES USE ARBOR

PROD NO IN MM snap-back STANDARD

30861438RL 4-3/8 111 Capri, Marco & Halo, Mini-Juno 2L 2L

12100538RL 5-3/8 137 Capri, Marco & Halo, Mini-Juno, Lightolier & Halo 2L 2L

30862638RL 6-3/8 162 Capri, Halo, Pathway & Thomas 2L 2L

30863658RL 6-5/8 168 Juno, Progress & Pathway 2L 2L

30864678RL 6-7/8 175 Capri, Hubbell®

, Lightolier®

, Lithonia®

, Marco, Prescolite®

, Progress 2L 2L

Use 123CT or 4321 Pilot Drill

CARBIde GRIT ReCeSSed lIGhTInG hole SAWS

Best for Cutting Abrasive Materials

HALO is a registered trademark of Halo Lighting, JUNO is a registered trademark of Juno Lighting Inc.,

LITHONIA is a registered trademark of Lithonia, Inc., LIGHTOLIER is a registered trademark of Lightolier, Inc.,

and PRESCOLITE is a registered trademark of Prescolite, Inc.

long lifE

Hard tungsten carbide grit edge for a long life in abrasive materials

fast, Easy cutting

Continuous cutting edge for smooth cutting

limits dust / dEbris

Solid back design collects dust and debris

nEW dEsign

HOLE SAW SELECTION GUIDE

WOOD

NAIL-

EMBEDDED

WOOD

NON-

FERROUS

METAL

PLASTICS &

COMPOSITES METAL STAINLESS

STEEL

DRYWALL/

PLASTER

CAST

IRON

CEMENT

BOARD ABRASIVES TILE STONE

BEST

CARBIDE TIPPED CARBIDE

GRIT CARBIDE TIPPED LENOX® DIAMOND™

BETTER

BI-METAL BI-METAL CARBIDE

TIPPED CARBIDE GRIT

GOOD

CARBIDE

GRIT —CARBIDE

GRIT

CARBIDE

TIPPED CARBIDE GRIT CARBIDE

GRIT BI-METAL — CARBIDE

TIPPED —

Customer Service 800-628-8810

46

ReCommended hole SAW RPm

CARBIDE TIPPED

DIAMETER FIBER- CERAMIC PARTICLE CAST COMPUTER

IN MM ALUM PLASTIC GLASS TILE BOARD IRON FLOORING

3/4 19.1 1700 3430 250 500 3430 410 550

7/8 22.2 1500 2940 210 430 2940 180 470

125.4 1300 2570 190 370 2570 150 410

1-1/8 28.6 1100 2290 170 330 2290 140 370

1-3/8 34.9 900 1870 140 270 1870 110 300

1-1/2 38.1 900 1710 120 250 1710 100 270

1-3/4 44.5 700 1470 110 210 1470 90 240

250.8 600 1290 90 190 1290 80 210

2-1/4 57.2 600 1140 80 170 1140 70 180

2-1/2 63.5 500 1030 70 150 1030 60 160

376.2 400 860 60 120 860 50 140

3-1/4 82.6 400 790 60 110 790 50 130

3-5/8 92.1 400 710 50 100 710 40 110

3-3/4 95.3 300 690 50 100 690 40 110

4-1/8 104.8 300 620 50 90 620 40 100

4-3/4 120.7 300 540 40 80 540 30 90

5127.0 200 480 40 80 500 30 90

5-1/2 139.7 200 420 40 70 460 30 80

6152.4 100 360 30 60 420 30 60

Suggested RPMs only

BRICK, DRYWALL, SLATE, FIBERGLASS,

DIAMETER PORCELAIN, MARBLE CEMENT & PARTICLE BOARD CAST

IN MM CERAMIC TILE LAMINATES, GRANITE IRON

3/4 19.1 800 900 600

25/32 19.8 800 900 600

7/8 22.2 800 900 600

125.4 800 900 600

1-1/8 28.6 500 600 400

1-1/4 31.8 500 600 400

1-3/8 34.9 500 600 400

1-1/2 38.1 500 600 400

1-3/4 44.5 500 600 400

250.8 400 500 200

2-1/8 54.0 400 500 200

2-1/4 57.2 400 500 200

2-3/8 60.3 200 300 100

2-1/2 63.5 200 300 100

2-9/16 65.1 200 300 100

2-5/8 66.7 200 300 100

376.2 200 300 100

3-1/4 82.6 100 200 100

3-5/8 92.1 100 200 100

4101.6 100 200 100

4-1/8 104.8 100 200 100

Suggested RPMs only

ONE PIECE

DIAMETER

IN MM

3/16 51500-2000

1/4 62000-2500

5/16 82000-2500

3/8 10 2000-2500

1/2 13 2000-2500

5/8 15 1500-2000

3/4 19.1 1500-2000

Suggested RPMs only

STANDARD

DIAMETER

IN MM

7/8 22.2 800-1200

1-1/18 28.6 500-900

1-1/4 31.8 500-900

1-3/8 34.9 500-900

1-1/2 38.1 500-900

250.8 400-800

2-1/2 63.5 200-600

Suggested RPMs only

BI-METAL

DIAMETER MILD TOOL & CAST

IN MM STEEL STAINLESS IRON BRASS ALUM

9/16 14.3 580 300 400 790 900

5/8 15.9 550 275 365 730 825

11/16 17.5 500 250 330 665 750

3/4 19.1 460 230 300 600 690

25/32 19.8 425 210 280 560 630

13/16 20.6 425 210 280 560 630

7/8 22.2 390 195 260 520 585

15/16 23.8 370 185 245 495 555

125.4 350 175 235 470 525

1-1/16 27.0 325 160 215 435 480

1-1/8 28.6 300 150 200 400 450

1-3/16 30.2 285 145 190 380 425

1-1/4 31.8 275 140 180 360 410

1-5/16 33.3 260 135 175 345 390

1-3/8 34.9 250 125 165 330 375

1-7/16 36.5 240 120 160 315 360

1-1/2 38.1 230 115 150 300 345

1-9/16 39.7 220 110 145 290 330

1-5/8 41.3 210 105 140 280 315

1-11/16 42.9 205 100 135 270 305

1-3/4 44.5 195 95 130 250 295

1-13/16 46.0 190 95 125 250 285

1-7/8 47.6 180 90 120 240 270

250.8 170 85 115 230 255

2-1/16 52.4 165 80 110 220 245

2-1/8 54.0 160 80 105 210 240

2-1/4 57.2 150 75 100 200 225

2-3/8 60.3 140 70 95 190 220

2-1/2 63.5 135 65 90 180 205

2-9/16 65.1 130 65 85 175 200

2-5/8 66.7 130 65 85 170 195

2-11/16 68.3 125 60 80 160 185

2-3/4 69.9 125 60 80 160 185

2-7/8 73.0 120 60 80 160 180

376.2 115 55 75 150 170

3-1/8 79.4 110 55 70 140 165

3-1/4 82.6 105 50 70 140 155

3-3/8 85.7 100 50 65 130 150

3-1/2 88.9 95 45 65 130 145

3-5/8 92.1 95 45 60 120 140

3-3/4 95.3 90 45 60 120 135

3-7/8 98.4 85 40 55 110 130

4101.6 85 40 55 110 130

4-1/8 104.8 80 40 55 110 120

4-1/4 108.0 80 40 55 110 120

4-3/8 111.1 75 35 50 100 105

4-1/2 114.3 75 35 50 100 105

4-5/8 117.5 75 35 50 100 105

4-3/4 120.7 70 35 45 90 95

5127.0 70 35 45 90 95

5-1/2 139.7 65 30 40 85 90

6152.4 65 30 40 85 90

LENOX diamond™ HOLE SAWS

PORCELAIN, CERAMIC, SLATE, GRANITE, MARBLE, GLASS, FIBERGLASS, TRAVERTINE,

CEMENT BOARD, LAMINATES

CARBIDE GRIT

HOLE SAWS

LENOX® VaRI- BIT® Step Drill Bits ......................48

Bi-metal Ship Auger Bits ...................................... 49

Bi-metal Utility Bits ...............................................50

Bi-metal Self-Feed Bits .........................................51

mEtAL AND

wOOD DRiLLiNg

Customer Service 800-628-8810

48 LENOX VARI-BIT STEP DRILL BITS

30889889

3 PIECE KIT

VB1, VB2,

VB3

COMPACT KIT

30926VBK4

4 PIECE KIT

VB1, VB2,

VB7, VB8

COMPACT KIT

30929VB30929

4 PIECE KIT

VB1, VB3,

VB8, VB12

COMPACT KIT

30927VBKA6

6 PIECE KIT

VB1, VB2, VB6,

VB7, VB8, VB11

COMPACT KIT

1 PER PACK HOLE SIZES #OF HOLE

SIZES

SHANK SIZE

PROD NO IN MM IN MM

30881VB1 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16,

11/32, 3/8, 13/32, 7/16, 15/32, 1/2

3.2, 4.0, 4.8, 5.6, 6.4, 7.1, 7.9,

8.7, 9.5, 10.3, 11.1, 11.9, 12.7 13 1/4 6.4

30882VB2 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8,

15/16, 1

12.7, 14.3, 15.9, 17.5, 19.1,

20.6, 22.2, 23.8, 25.4 93/8 9.5

30883VB3 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,

11/16, 3/4

6.4, 7.9, 9.5, 11.1, 12.7,

14.3, 15.9, 17.5, 19.1 93/8 9.5

30884VB4 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 4.8, 6.4, 7.9, 9.5, 11.1, 12.7 6 1/4 6.4

30886VB6 3/8, 1/2 9.5, 12.7 21/4 6.4

30887VB7 7/8 (for 1/2 conduit) 22.2 (for 12.7 conduit) 1 3/8 9.5

30908VB8 3/16, 1/4, 5/16, 3/8, 7/16, 1/2,

9/16, 5/8, 11/16, 3/4, 13/16, 7/8

4.8, 6.4, 7.9, 9.5, 11.1, 12.7,

14.3, 15.9, 17.5, 19.1, 20.6, 22.2 12 3/8 9.5

30909VB9 7/8, 1-1/8, 1-7/32 22.2, 28.6, 31.0 3 3/8 9.5

30888VB11 7/8, 1-1/8 (for 1/2 and 3/4 conduit) 22.2, 28.6

(for 12.7 and 19.1 conduit) 23/8 9.5

30912VB12 7/8, 1-1/8, 1-7/32, 1-1/4, 1-3/8 22.2, 28.6, 31.0, 31.8, 34.9 5 3/8 9.5

30925VBX8 8" (203mm) Extension. Fits 3/8 (9.5mm) shank & larger. 1 per pack. - 3/8 9.5

lenox VARi-Bit ® STeP dRIll BITS

Drills Fast, Clean, Round Holes

accuratE, burr-frEE holEs

Patented two flute design cuts fast, clean, round holes

starts on contact

Split point design for faster penetration and less walking

long tool lifE

Steam oxide coating adds durability. Enhanced flute design removes chips

rapidly. Use of LENOX PROTOOL LUBE® recommended to extend tool life

49

lenoxtools.com

ExtrEmE durability

High speed steel cutting edge for superior

durability in nail-embedded wood

longEr lifE

High speed steel screw tip increases wear

resistance for extended life

fast, Easy drilling

Unique parabolic screw tip pulls the bit through

material quickly and effortlessly

rEsharpEnablE

Resharpen with LENOX Diamond File

(prod no. 25312DIAF1)

BI-meTAl ShIP AuGeR BITS

Tougher than Nails

PROD NO HOLE DIAMETER OVERALL LENGTH TWIST LENGTH

IN MM IN MM IN MM

1455507A1016 5/8 16 7-1/2 191 4102

1455607A1116 11/16 18 7-1/2 191 4102

1455707A1216 3/4 19 7-1/2 191 4102

1455807A1316 13/16 21 7-1/2 191 4102

1455907A1416 7/8 22 7-1/2 191 4102

1456007A1516 15/16 24 7-1/2 191 4102

1456107A1616 125 7-1/2 191 4102

1456207A1716 1-1/16 27 7-1/2 191 4102

1456307A1816 1-1/8 29 7-1/2 191 4102

1456407A2016 1-1/4 32 7-1/2 191 4102

1456507A2216 1-3/8 35 7-1/2 191 4102

1456607A2416 1-1/2 38 7-1/2 191 4102

1787507

15 PIECE, SELF-FEED BIT/ AUGER KIT

Augers: 7/8", 1-1/8", 1-1/4". Length: 7-1/2"

Self-feed bits: 1-1/2", 1-3/4", 2-1/8", 2-9/16"

Extension: 5-1/2". Five lead screws

Hex Wrench Set

LARGE KIT

PROD NO HOLE DIAMETER OVERALL LENGTH TWIST LENGTH

IN MM IN MM IN MM

145390080616* 3/8 10 18 457 12 305

145400080716* 7/16 11 18 457 12 305

145410080816 1/2 13 18 457 12 305

145420080916 9/16 14 18 457 12 305

145430081016 5/8 16 18 457 12 305

145440081116 11/16 18 18 457 12 305

145450081216 3/4 19 18 457 12 305

145460081316 13/16 21 18 457 12 305

145470081416 7/8 22 18 457 12 305

145480081516 15/16 24 18 457 12 305

145490081616 125 18 457 12 305

145500081716 1-1/16 27 18 457 12 305

145510081816 1-1/8 29 18 457 12 305

145520082016 1-1/4 32 18 457 12 305

145530082216 1-3/8 35 18 457 12 305

145540082416 1-1/2 38 18 457 12 305

*3/8" shank—all others 1/2" shank

Our bi-metal technology fuses

two premium steels together.

Parabolic

Tip

High Speed

Steel Cutting Edge

BI-METAL SHIP AUGER BITS

Customer Service 800-628-8810

50

14788500PK

5 PIECE

PLUMBER’S KIT

3/4", 7/8", 1", 1-1/8", 1-3/8"

10955500K

5 PIECE KIT

3/4", 7/8", 1", 1-1/8",

1-1/4"

10954300S

3 PIECE SET

3/4", 7/8", 1"

14787300PS

3 PIECE

PLUMBER’S SET

7/8", 1-1/8", 1-3/8”

BI-meTAl uTIlITY BITS

Tougher Than Nails

ExtrEmE durability

High speed steel cutting edges provide long life in

tough applications, including nail-embedded wood

optimiZEd for cordlEss drilling

Smooth, effortless drilling extends battery life

fast clEan cutting

Three cutting edges enhance chip removal for a

fast, clean hole

fast, Easy drilling

Aggressive lead screw tip pulls the bit through

material quickly and effortlessly

PROD NO HOLE SIZE OVERALL LENGTH

IN MM IN MM

1094706A1016 5/8* 16 6 152

1094806A1216 3/4 19 6 152

1094906A1416 7/8 22 6 152

1095006A1616 125 6 152

1095106A1816 1-1/8 29 6 152

1095206A2016 1-1/4 32 6 152

1095306A2216 1-3/8 35 6 152

*1/4" shank—all others 3/8" shank

RESHARPENABLE

Resharpen with LENOX

Diamond File ( 25312DIAF1)

Steel Cutting Edge

3 Cutting EdgesFits Cordless Drill

BI-METAL UTILITY BITS

COMPACT KIT COMPACT KIT

51

lenoxtools.com

BI-meTAl Self-feed BITS

Tougher than Nails

PROD NO DESCRIPTION FITS QTY PER

PACK

ACCESSORIES

1787602 Self-Feed Lead Screws 1"- 1-3/8" 5

1787604 Self-Feed Lead Screws 1-1/2"- 2-9/16" 5

1787603 Self-Feed Lead Screws 3"- 4-5/8" 5

1787605 Self-Feed Set Screws — 5

1787508 Hex Wrench Set, 1/8" — 2

3084655X 5-1/2" shank extension* — 1

3084712X 12" shank extension* — 1

3084818X 18" shank extension* — 1

25312DIAF1 Diamond File — 1

*All have 1/2" (13mm) hex shank with 2 set screws to lock BI-METAL SELF-FEED

BIT in place

1787505

12 PIECE SELF-FEED KIT

1-3/8", 1-1/2", 2-1/8", 2-9/16"

Extension: 5-1/2" Five lead

screws. Hex Wrench Set

LARGE KIT

1787506

16 PIECE SELF-FEED KIT

1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-3/4",

2-1/8", 2-9/16" Extensions: 5-1/2", 12"

Five lead screws Hex Wrench Set

LARGE KIT

HOLE ENTRANCE FOR PIPE ENTRANCE

PROD NO DIAMETER RIGID CONDUIT FOR TUBING

IN MM IN MM IN MM

1787511 125 1/2 12.7 7/8 22.2

1787512 1-1/8 29 1/2 12.7 125.4

1787513 1-1/4 32 3/4 19 1-1/8 28.6

1787515 1-3/8 35 125.4 1-1/4 31.8

1787561 1-1/2 38 – – 1-3/8 34.9

1787562 1-3/4 45 1-1/4 31.8 1-1/2 38.1

1787563 251 1-1/2 38.1 1-7/8 47.6

1787564 2-1/8 54 – – 2 50.8

1787565 2-1/4 57 – – 2-1/8 54

1787566 2-9/16 65 250 2-1/2 63.5

1787502 376 2-1/2 63 2-7/8 73

1787503 3-5/8 92 376.2 3-1/2 88.9

1787504 4-5/8 118 4101.6 4-1/2 114.3

1787507

15 PIECE SELF-FEED BIT/ AUGER KIT

Augers: 7/8", 1-1/8", 1-1/4", Length: 7-1/2"

Self-feed bits: 1-1/2", 1-3/4", 2-1/8", 2-9/16"

Extension: 5-1/2", Five lead screws

Hex Wrench Set

LARGE KIT

RESHARPENABLE

Resharpen with LENOX

Diamond File ( 25312DIAF1)

ExtrEmE durability

High speed steel cutting edge for superior durability in

nail-embedded wood

Stays sharper longer

clEan holEs and Easy rEmoval

Chamfered edge allows bit to be removed easily after drilling

Flutes remove excess wood chips

fast, Easy drilling

Aggressive lead screw tip pulls the bit through material quickly

and effortlessly

incrEasEd valuE

Extra lead screw and wrench included in every package

dEEpEr cuts

Longer shank that cuts 4"x 4" without extension

quick changE

Impact hex shank allows for quick changing of the bits

High Speed Steel Lead Tip

Screw

Chamfered Edge

& Flutes

BI-METAL SELF-FEED BITS

T2™ Hacksaw Blades ........................................55

Hacksaw Frames ........................................ 56, 57

Hand Saws .......................................................58

Snips & HVAC Tools .........................................59

Plastic Tubing Cutters ................................. 60, 61

Tubing Cutters ............................................62, 63

Locking Tradesman Utility Knife &

Utility Knives .....................................................64

Utility Blades, Safety Knife & Blades ................65

Soft Storage Tool Bags ............................... 66, 67

Pipe Wrenches & All-In-One Screwdrivers ......65

Customer Service 800-628-8810

54

55

lenoxtools.com

t2™ TeChnoloGY hACkSAW BlAdeS

Up to 2X Life

t2 tEchnology

A new blade design that delivers up

to 100% longer blade life versus the prior

generation of LENOX hacksaw blades

shattEr rEsistant

Bi-metal construction allows blades to bend and flex

without breaking

cuts through tough mEtals:

• Black Pipe

• Unistrut®

• Copper Pipe

• Hardened Steel

• Threaded Rod

• Rebar

LENGTH X WIDTH 1-PACK 2-PACK 10-PACK 100-PACK APPLICATION

TPI

IN MM PROD NO PROD NO PROD NO PROD NO

14 12 x 1/2 300 x 12.7 — — 20143V214HE —Wood and Metal

18 10 x 1/2 250 x 12.7 20150S018HE 20163T018HE 20140V018HE 20110018HE Heavy Metal

18 12 x 1/2 300 x 12.7 20154S218HE 20160T218HE 20144V218HE 20116218HE Heavy Metal

24 10 x 1/2 250 x 12.7 20151S024HE 23930T024HE 20141V024HE 20111024HE Medium Metal

24 12 x 1/2 300 x 12.7 20155S224HE 20161T224HE 20145V224HE 20117224HE Medium Metal

32 10 x 1/2 250 x 12.7 20152S032HE 20164T032HE 20142V032HE 20112032HE Thin Metal

32 12 x 1/2 300 x 12.7 20156S232HE 20162T232HE 20146V232HE 20118232HE Thin Metal

HACKSAW BLADES

Customer Service 800-628-8810

56 HACKSAW FRAMES

PROD NO BLADE SPECIFICATION

12132HT50 12” (300mm) 24TPI Hacksaw Blade

hT50 hIGh TenSIon hACkSAW

50,000 PSI

highEst tEnsion. EvEr

Unique I-beam construction allows blade to tension up

to 50,000 psi, resulting in fast, straight cuts

comfortablE grips

Rubberized handles allow for confident handling even in

wet or cold environments

convErt to a jab saW

Accepts any LENOX reciprocating saw blade to be used

as a jab saw

convEniEnt bladE storagE

Store up to 5 extra 12" hacksaw blades in the I-Beam

50,000 PSI

Tension Use as a Jab Saw Stores up to 5

Blades

Comfort Grips

PROD NO BLADE SPECIFICATION

209205012 12" (300mm) 24TPI Hacksaw Blade

5012 loW PRofIle hACkSAW

40,000 PSI

high tEnsion

Allows blade to tension up to 40,000 PSI, resulting in fast,

straight cuts

fits into tight spots

Low profile tip easily handles close-quarter cuts

multi-purposE

Mount blade at 45 degrees for flush cutting applications

40,000 PSI

Flush Cutting

57

lenoxtools.com

15,000 PSI

1512 AdjuSTABle hACkSAW

15,000 PSI

Easily adjust tEnsion

Large front tensioning mechanism is easy to hold and

adjust up to 15,000 PSI

Ergonomic grip

Rubberized grip allows for confident handling in any work

environment

PROD NO BLADE SPECIFICATION

1805723 12" (300mm) 24TPI Hacksaw Blade

20,000 PSI

PROD NO BLADE SPECIFICATION

1805722 12" (300mm) 24TPI Hacksaw Blade

2012 ComPACT hACkSAW

20,000 PSI

adjustablE tEnsion

Lightweight aluminum beam achieves tension up to

20,000 PSI

Ergonomic grip

Durable handle enables a confident grip in most work

environments

multi-purposE

Mount blade at 45 degrees for flush cutting applications

Comfortable Grip

Comfortable Grip

88300 lIGhTWeIGhT hACkSAW

30,000 PSI

high tEnsion

Saw will tension up to 30,000 PSI

Easily adjust tEnsion

Ergonomic grip

Front handle grip reduces fatigue in continuous cutting

applications

multi-purposE

Mount blade at 45 degrees for flush cutting applications

PROD NO BLADE SPECIFICATION

1213188300 12" (300mm) 24TPI Hacksaw Blade

30,000 PSI

Flush Cutting Comfort Grips

HACKSAW FRAMES

Customer Service 800-628-8810

58 HAND SAWS

PvC/ABS

Plastic Pipe Hand Saw

cuts plastic pipE Easily

Cutting teeth cut on the pull stroke and not on the push stroke for safety

comfortablE grips

Rubberized handles allow for confident handling even in cold, hot, wet or

dirty environments

flush cutting option

Easily mount the blade on the bottom of handle for flush cutting applications

20908

20975

975 ComPACT hAnd hACkSAW

908 CLOSE qUARtER™ SAW

Cut a Wide Variety in Tight Spaces

ruggEd dEsign

Heavy duty aluminum handle

fits in tight spots

Allows for flush cutting applications

Comfortable

Handle

One Step

Flush Cuttings

foldInG jAB And uTIlITY SAW

Designed for Cutting Multiple Materials

comfortablE grip

Over-molded rubberized grip for a comfortable and secure

grip while working

sEcurEly holds bladE

Aluminum locking mechanism prevents blade from being

removed during use

accommodatEs hacksaW bladE

Ideal for flush cutting applications or when a hacksaw

is not available

diE cast aluminum construction

Loosen Knob to

Change Blade

Rotate Blade Out

PROD NO DESCRIPTION BLADES INCLUDED APPLICATION

20997TFHS618636 Folding Jab Saw with 2 Blades 6J6R and 636RP Plaster, drywall, wood, plastic and metal cutting

148216J6R One Pack Replacement Blades

PROD NO DESCRIPTION TPI BLADE LENGTH

IN MM

20975975 Compact Hand Saw 10 12 304

20908908 CLOSE QUARTER Saw 10 18 457

20906906 Replacement Blades 32 6 152

TPI LENGTH PROD NO DESCRIPTION

IN MM

10 12 304 20985HSF12 12" Blade & Handle

10 18 457 20980HSF18 18" Blade & Handle

10 12 304 20982HSB12 12" Replacement Blade

10 18 457 20981HSB18 18" Replacement Blade

59

lenoxtools.com

hvAC ToolS

Precision Sheet Metal Fabrication Tools

SnIPS

Maximum Durability for Long Life

long bladE lifE

Precision-formed blades for Aviation and Bulldog Snips

Bi-material blades for Offset Snips

ultimatE spring durability

Reinforced Chrome Silicon valve-quality wire lasts for a lifetime

comfortablE grips

Over-molded handles won’t slip or twist

quick idEntification

Color coding on both blades and handles plus arrow icons allow

for easy tool recognition

ultimatE spring durability

Reinforced Chrome Silicone valve-quality wire lasts for a lifetime

comfortablE grips

Over-molded handles won’t slip or twist

CUTTING CAPACITY COMPETITIVE CROSS REFERENCE

PROD NO DESCRIPTION SHEET METAL S TAIN LE SS S T EEL MALCO® MIDWEST® WISS® KLEIN®

22101101 Aviation Snip Left 18 ga 22 ga M2001/MAXCG1 P6716-L M1R 1100L

22102102 Aviation Snip Right 18 ga 22 ga M2002/MAXCG2 P6716-R M2R 1101R

22103103 Aviation Snip Straight 18 ga 22 ga M2003/MAXCG3 P6716-S M3R 1102S

22105105 Aviation Snip Bulldog 16 ga 20 ga M2005/MAXCG5 P6716-B M5R 2103

22206206 Offset Snip Left 18 ga 22 ga M2006/MAXCG6 P6510-L M6R 2100L

22207207 Offset Snip Right 18 ga 22 ga M2007/MAXCG7 P6510-R M7R 2101R

CUTTING CAPACITY COMPETITIVE CROSS REFERENCE

PROD NO DESCRIPTION SHEET METAL STAINLESS STEEL MALCO® MIDWEST® WISS® KLEIN®

22208C3 3 Blade Crimper 18 ga 22 ga C3 —HC3V —

22209C5 5 Blade Crimper 18 ga 22 ga C5 FCT-M-C5 HC5V 86550

22210S2 3" Seamer 18 ga 22 ga S2 FCT-M-S1 HS1V 86553

22211N2 1" V Notcher 18 ga 22 ga N2 — — —

22212SL1 Snap Lock Punch 18 ga 22 ga SL1 FCT-M-L1 — —

22213PDC4R Pipe Duct Cutter 18 ga 22 ga 4R FCT-M-P1 M14R —

Malco is a registered trademark of Malco Products, Inc. Midwest is a registered trademark of Midwest Tool and Cutlery Company

Wiss is a registered trademark of Cooper Industries, Inc. Klein is a registered trademark of Klein Tools.

SNIPS & HVAC TOOLS

Customer Service 800-628-8810

60 TUBING CUTTERS

Straight Cuts

Easy Open

& Close

S1 PEX TUBING CUTTER

Perfect Cuts. Straight and Easy.

S2 CPVC TUBING CUTTER

Durable Construction

pErfEct cuts. straight and Easy.

Serrated stainless steel blade requires less force to

make a cut, leaving a flush end

comfortablE grips

Rubberized handles allow for confident cutting even in

wet or dirty environments

Easy opEn & closE

Conveniently positioned locking latch allows for true

one-handed operation of spring-loaded cutter

cuts up to 1” nominal

(1-5/16”max. od)

pErfEct cuts. straight and Easy.

High carbon steel blade cuts rigid plastic tubing with a

single cut

comfortablE grips

Rubberized handles allow for confident cutting even in

wet or dirty environments

durablE construction

Cast aluminum body stands up to rugged, repeated use

Easy opEn & closE

Conveniently positioned locking latch allows for true

one-handed operation of spring-loaded cutter

cuts up to 1” nominal

(1-5/16" max. od)

PROD NO DESCRIPTION

12122S2 CPVC Cutter

12126S2B Plastic Tubing Cutter Replacement Blade

PROD NO DESCRIPTION

12121S1 PEX Cutter

12125S1B Plastic Tubing Cutter Replacement Blade

PEX Poly PE

CPVC Poly PEPEXPVC

61

lenoxtools.com TUBING CUTTERS

PROD NO DESCRIPTION

12124R2 PVC Cutter

12128R2B Plastic Tubing Cutter Replacement Blade

pErfEct cuts. straight and Easy.

Specifically designed jaw holds pipe in place while

cutting with stainless steel blade

comfortablE grips

Rubberized handles allow for confident cutting

even in wet or dirty environments

Easy opEn & closE

Conveniently positioned release button allows for

true one-handed operation of ratcheting cutter,

while locking tab secures blade in place

cuts up to 1-1/4” nominal

(1-5/8” max. od)

pErfEct cuts. straight and Easy.

Specifically designed jaw holds pipe in place while

cutting with high-carbon steel blade

onE-handEd ratchEting

One of the only large diameter cutters than can be

ratcheted with just one hand

Easy opEn

Pull both handles apart to quickly start the next cut

cuts up to 2” nominal

(2-3/8” max. od)

R1 PVC TUBING CUTTER

Easy Ratcheting

R2 PVC TUBING CUTTER

One-Handed Operation

PROD NO DESCRIPTION

12123R1 PVC Cutter

12127RB1 Plastic Tubing Cutter Replacement Blade

PVC Poly PE

PEX

CPVC

Easy Ratcheting One-Handed

Operation

Easy Ratcheting One-Handed

Operation

Poly PEPEXPVC

PVC

Customer Service 800-628-8810

62 TUBING CUTTERS

21008TC58 21009TC1 21010TC118 21011TC138 21012TC134 21013TC258

TuBInG CuTTeRS

Ergonomically Designed for Professional Performance

TUBE DIAMETER RANGE NUMBER

PROD NO DESCRIPTION IN MM OF WHEELS

21008TC58 Copper Cutting 1⁄8–5⁄8 3–16 1

21009TC1 Copper Cutting 1⁄ 8–1 3–25 2

21010TC118 Copper Cutting 1⁄8–1-1⁄8 3–29 2

21011TC138 Copper Cutting 1⁄8–1-3⁄8 3–35 2

21012TC134 Copper Cutting 1 ⁄ 8–1-3 ⁄ 4 3–45 2

21013TC258 Copper/Plastic Cutting 1⁄4–2-5⁄8 6–67 2

Won’t Walk WhilE cutting

Four roller tracking system keeps tube from threading

profEssional dEburring

Cleanly and easily deburr pipes with the replaceable

machinist’s reamer

Will not damagE cutting WhEEls

Full-stop feed system prevents wheels and rollers from

coming into contact

Easy to usE

Change out wheels quickly & easily

convEniEnt storagE

Store an extra cutting wheel in the handle

63

lenoxtools.com

14830TS12 14831TS34 14832TS1

TIGhT SPACe TuBInG CuTTeRS

Cuts You Out of a Tight Spot

1-PACK 2-PACK 6-PACK

DESCRIPTION PROD NO PROD NO PROD NO

Stainless Steel Cutting Wheels* —21193TCW158SS2 21015TCW158SS

Plastic Cutting Wheels*** — 21191TCW158P2 21016TCW158P

Copper Cutting Wheels* —21192TCW158C2 21017TCW158C

Small Copper Cutting Wheels** 14829TSB

Replacement Deburrer fits 21011 & 21012 TC 21024TCD — —

Tubing Cutter Handle Screw**** 21196TCHS — —

* Fits 21010, 21011, 21012, 21013 and many other competitors’ Tubing Cutters

** Fits LENOX Product No 21008, 21009, 14830, 14831, 14832

*** Fits 21013

**** Fits LENOX Product No 21010-21013 only

Tubing Cutter Accessories

Stainless

Steel

Plastic Copper Deburrer

TUBE DIAMETER RANGE NUMBER

PROD NO DESCRIPTION IN MM OF WHEELS

14830TS12 Copper Cutting 1/2 13 1

14831TS34 Copper Cutting 3/4 19 1

14832TS1 Copper Cutting 125 1

14833TSK 3 pc Kit 1/2, 3/4, 1 13,19,25

Small

Copper

lEss burr. morE cuts.

Optimized blade geometry of shock-resistant steel

compact dEsign for tight spots

Non-slip grooved cast aluminum body only needs 1/2" clearance to cut

no rusting

Stainless steel rollers protect the cutter from corrosion

quick idEntification

Color coding for easy tool recognition and cutting direction

14833TSK

TUBING CUTTERS

Customer Service 800-628-8810

64 KNIVES & BLADES

loCkInG TRAdeSmAn uTIlITY knIfe

Works Big. Folds Small.

uTIlITY knIveS

Durable Construction and Comfortable Grip for Extended Use

Easy opEn & closE

Secure locking mechanism

comfort grip

Ergonomic rubberized grip

multi-usE tool

Bottle opener, screwdriver and pipe reamer

built-in WirE strippEr

PROD NO DESCRIPTION

10771FLK1 LENOX Gold® Locking Tradesman Utility Knife

PROD NO DESCRIPTION

20353SSRK1 L E N O X Gold Quick Change Retractable Knife

20354SSFK1 LENOX Gold Fixed Blade Knife

ExtrEmEly durablE stainlEss stEEl nosE

One piece titanium coated nose resists wear and

eliminates spreading

longEst lasting utility bladEs

Three shatterproof titanium edge blades included

Easy bladE changE

Quick blade release allows rotation or changing of

blade without opening handle

intErnal bladE storagE

Retractable knife stores up to five blades

Fixed knife stores up to ten blades

no tool nEEdEd to opEn

Wire Stripping Pipe Reamer

Screwdriver Bottle Opener

65

lenoxtools.com

uTIlITY BlAdeS

Titanium Edge for Maximum Blade Life

lasts longEr

High speed steel edge with titanium coating

keeps blades cutting after others have quit

shattErproof

Patented bi-metal construction allows

blades to bend and flex without breaking

makEs dEEpEr cuts

Four notch design allows blade to extend further

fits all standard utility knivEs

cuts thE toughEst matErials

• Dry wall

• Insulation

• Flooring

• Roofing and more

dispEnsErs

• Easy to use

• Dispenses one or five

blades at a time

• 50 packs and 100 packs

include dispensers

smooth sElf-rEtraction

Spring loaded shuttle

comfortablE, non-slip handlE

Ergonomic design

dual function

Utility knife and box cutter settings

no tool nEEdEd for bladE changE

Quick blade changes

storEs up to 5 bladEs

incrEasEd safEty

Blunt tip design

shattErproof

Patented bi-metal construction

Bends and flexes without breaking

long bladE lifE

High speed steel edge

DESCRIPTION 5-PACK 50-PACK 100-PACK

PROD NO PROD NO PROD NO

L E NOX Gold Utility Knife Blade 20350GOLD5C 20351GOLD50D 20352GOLD100D

PROD NO DESCRIPTION

20366SRK1 Self-Retracting Safety Knife

20367BLUNT5C Blunt Tip Safety Blade 5 pack

20368BLUNT50D Blunt Tip Safety Blade 50 pack with Dispenser

Self-ReTRACTInG SAfeTY knIfe & BlunT TIP SAfeTY BlAdeS

A Safety Blade that Works

KNIVES & BLADES

Customer Service 800-628-8810

66

SofT SToRAGe Tool BAGS

gEt organiZEd

Multiple pockets and storage options allow for easily locating

the right tool

functional dEsign

Padded shoulder straps make carrying comfortable

Reflective materials make bag easy to find in darkness

Red liner helps to easily locate tools

holds up to thE job

Water-resistant materials and reinforced rivets to withstand

tough job site use

Tools not included

TOOL BAGS

67

lenoxtools.com

Small Parts Bin

Tape Loop

Key Clip

Handle Clip

PLUMBER’S TOTE

BUCKET TOOL ORGANIZER

Bucket not included

Hacksaw not included

• 9 Exterior pockets

• 14 Interior pockets

• 10 Elastic loops

• Hacksaw pocket

• Tape measure clip

• Tape holder loop

• Foldable handle

• Padded shoulder strap

• Reflective material

• Hard plastic

waterproof bottom

• 22 Exterior pockets

• 12 Interior pockets

• Hammer loop

• Tape hold loop

• Foldable handle

• Padded shoulder strap

• Side clips secure the

organizer

• Reflective material

Tape Loop

PROD NO DESCRIPTION

1787474 19" Plumber’s Tote

Shoulder Strap

Side Clip

PROD NO DESCRIPTION

1787473 Bucket Tool Organizer

CONTRACTOR’S TOOL BAG

• Large open-mouth

bag

• 14 Interior pockets

• Small parts bin

• Padded shoulder strap

• Reflective material

• Reinforced water-

resistant bottom

• Protective pad feet on

bottom

PROD NO DESCRIPTION

1787426 16" Contractor’s Tool Bag

• 5 Open storage areas

• 12 Exterior pockets

• 16 Elastic loops

• 8 Interior pockets

• Tape measure clip

• Key clip

• Tape holder loop

• Small parts bin

• Clip on handle

• Padded shoulder strap

• Reflective material

• Reinforced rivets

• Water-resistant

bottom

• Protective pad feet

on bottom

ELECTRICIAN’S TOTE

PROD NO DESCRIPTION

1787422 10" Electrician’s Tote

TOOL BAGS

Customer Service 800-628-8810

68

+25%

PIPe WRenCheS

Built for Extreme Durability

grips tightly

Hardened teeth are ideal for most hard pipes,

bolts and couplings

Withstands high torquE

Enhanced durability for maximum torque

rEducEs hand fatiguE (cast aluminum)

Lightweight cast aluminum handle creates less

arm stress Heavy-Duty Cast Iron

Lightweight Cast Aluminum

PROD NO SIZE PIPE CAPACITY RIDGID® COMPETITIVE CROSS REFERENCE

IN CM IN MM CAT NO MODEL NO

CAST ALUMINUM

2382010ALPW 10 25 1-1/2 40 31090 810

2382112ALPW 12 30 250 47057 812

2382214ALPW 14 36 250 31095 814

2382318ALPW 18 46 2-1/2 65 31100 818

2382424ALPW 24 61 380 31105 824

2382536ALPW 36 91 5125 31110 836

2382648ALPW 48 122 6 150 31115 848

HEAVY-DUTY

CAST IRON

2381208HDPW 820 125 31005 8

2381310HDPW 10 25 1-1/2 40 31010 10

2381412HDPW 12 30 250 31015 12

2381514HDPW 14 36 250 31020 14

2381618HDPW 18 46 2-1/2 65 31025 18

2381724HDPW 24 61 380 31030 24

2381836HDPW 36 91 5125 31035 36

2381948HDPW 48 122 6 150 31040 48

RIDGID® is a trademark of Ridge Tool Company

All-In-one SCReWdRIveRS

More Torque. More Power.

comfortablE grip

Slip-resistant ergonomic grip for maximum torque

rEducEd stripping

25% thicker nut driver for longer life

PROD NO DESCRIPTION #1 #2 3/16" 1/4" 1/4" 5/16" #2 #3 3/8"

23931 6-1 Screwdriver ••••••———

23932 9-1 Screwdriver ••• ••••••

PIPE WRENCHES & SCREWDRIVERS

69

lenoxtools.com

The LeNOX GuaraNTee

Our products are backed by the LENOX limited warranty. We warrant that our products are free from

defects in materials and workmanship and that these products will perform as described under normal

use and service. This warranty of quality is valid for 90 days from confirmed date of purchase. Except as

expressly set forth herein, LENOX makes no other warranties, express or implied, with regard to products,

and expressly disclaims any warranty of fitness for a particular purpose. This warranty gives you specific

legal rights and you may also have other rights which vary from state to state. Use our products only in

accordance with LENOX instructions.

GeNeraL SafeTy TipS

LENOX is involved in the Voluntary Pro tec tion Program (VPP), designed to recognize and promote effective

safety and health management. Our employees agree to participate in the program and work with man age-

ment to assure a safe and healthful workplace under an es tab lished set of criteria. Several benefits to the

VPP are the mo ti va tion to work safely, reduced workers’ com pen sa tion costs and fewer lost workdays due

to injuries. This all results in better quality and productivity.

We are also very concerned for the safety of the people using our products. Here are a few tips to remind

you to use all safety measures to avoid any type of injury:

1. Tools can injure – handle with care.

2. When cutting through walls, be sure you’re clear of electrical wires behind the wall.

3. Power tools can bind and kick back. Be sure to hold them firmly and keep yourself out of the recoil path.

4. Wear eye protection and other appropriate safety equipment when using tools.

5. Make sure ladders or staging are stable before using.

6. When using drilling accessories, a power tool with a torque limiting device is recommended.

7. Use power tools in accordance with manufacturers’ instructions and recommendations for

accessories.

Trademark iNfOrmaTiON

INCONEL is a registered trademark of Huntington Alloys Corporation.

DURANICKEL, INCOLOY, MONEL and NI-SPAN C are registered trademarks

of Inco Alloys International, Inc.

RENE 41 is a registered trademark of Teledyne Industries, Inc.

LITHONIA is a registered trademark of Lithonia, Inc.

LIGHTOLIER is a registered trademark of Lightolier, Inc.

PRESCOLITE is a registered trademark of Prescolite, Inc.

HUBBELL is a registered trademark of Hubbell, Inc.

MILWAUKEE is a registered trademark of Milwaukee Electric Tool Corp.

DEWALT is a registered trademark of Black & Decker Corporation.

MORSE is a registered trademark of M.K. Morse Company.

BOSCH is a registered trademark of Robert Bosch Tool Corporation.

NIMONIC is a registered trademark of Henry Wiggin & Company, Ltd.

KLEIN is a registered trademark of Klein Tools.

MALCO is a registered trademark of Malco Products, Inc.

MIDWEST is a registered trademark of Midwest Tool and Cutlery Company.

WISS is a registered trademark of Cooper Industries, Inc.

RIDGID is a registered trademark of Ridge Tool Company.

NICHOLSON is a registered trademark of Cooper Hand Tools.

STARRET T is a registered trademark of the L.S. Starrett Company.

Customer Service: 800-628-8810

Technical Support: 800-642-0010

lenoxtools.com

5204A

301 Chestnut Street, East Longmeadow, MA 01028-0504 USA

©1/2013 LENOX, Newell Rubbermaid

twitter.com/lenoxtools

youtube.com/lenoxtools

facebook.com/lenoxtools