130295 Manual Eng 04
2015-05-29
: Pdf 130295 Manual Eng 04 130295_manual_eng_04 45364 s
Open the PDF directly: View PDF 
.
Page Count: 9
DRIVE ENCLOSURE
USER MANUAL
MODELS 130295 & 130349
VERSION 2
MAN-130295/130349-UM-0515-04
manhattanproducts.com
At Right: Model 130295
Below: Model 130349
2
INTRODUCTION
Thank you for purchasing this Manhattan Drive Enclosure, Model 130295 ver. 2
(SuperSpeed USB 3.0 SATA 3.5”), or Model 130349 ver. 2 (SuperSpeed USB 3.0
SATA 2.5”).
With support for data transfer rates of up to 5 Gbps and drives up to 1 TB (Model
130349) or 3 TB (Model 130295), this device helps you optimize high-performance
computer storage applications.
A convenient built-in, one-touch copy feature helps to quickly transfer, share and
archive important data, while the durable, two-piece construction protects sensi-
tive drives from exposure and daily hazards. It’s a versatile and portable data
solution without bulky external power supplies or annoying cables and adapters.
By following the instructions in this user manual, you’ll soon be enjoying these
popular features:
• Plug and play and hot-swappable; Windows and Mac compatible
• Lifetime Warranty (For a complete list of country-specic warranties, go to
manhattanproducts.com/warranty.)
System Requirements
• Available USB 3.0 Standard-A port
• Windows XP/Vista/7/8; or Mac OS 8.6 or later versions
Package Contents (Model 130295)
• Drive Enclosure
• USB 3.0 cable, power adapter, screws (8), rubber feet (4)
• Software CD with user manual; multilanguage quick install guide
Package Contents (Model 130349)
• Drive Enclosure
• USB 3.0 cable, USB-to-DC power cable, screws (8), rubber feet (4)
• Software CD with user manual; multilanguage quick install guide
3
HARDWARE & DRIVER INSTALLATION
1. Remove the 4 screws on the bottom of the enclosure (A) and lift off the top (B).
2. Connect the hard drive to the SATA data and power connectors on the
enclosure, then secure it to the enclosure using the included screws (C).
3. Re-assemble the enclosure (D) using the 4 screws in Step 1.
4. Using the included USB cable, connect the enclosure to a USB port on the
computer.
Once the enclosure is connected to your PC, your system will automatically detect
the new hardware and complete the setup, conrmed when “USB Mass Storage
Device” displays in the Device Manager folder.
AB
C D
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
¶
4
SOFTWARE INSTALLATION
These steps are for the installation of the convenient one-touch backup software.
NOTE: This software doesn’t support Mac operating systems. Some images may
look different on your computer, as your software version may be slightly different
than the one represented here.
1. Load the included software CD. The
JMicron Backup program’s InstallShield
Wizard Welcome screen will display automatically. Click Next to continue.
2. When the wizard’s Complete screen displays, click Finish. NOTE: Most
screens present the option of clicking Back to return to a previous screen or
Quit to stop the installation procedure.
5
BACKING UP FILES
1. When the JMicron icon displays on
the desktop (right), double-click it to
launch the program (or go to Start /
Programs / JMicron Storage on your
desktop).
2. When the backup program is opened, the initial screen presents two options
for Backup Files: Backup or Restore. To back up les, click Add in the Host
panel. You can click on the folders you want to select for backup.
6
Backup les will be stored in a sub-folder called “Backup.”
3. With the destination drive and folder selected, click Backup for a default backup.
The operation will display the les being backed up as well as a status progress
bar. After all les selected are backed up, a pop-up message will announce that
the backup is complete and successful. Click Close to nish.
7
ONE-TOUCH BACKUP FUNCTION
With the drive enclosure loaded with a backup hard drive and connected to your
computer (and powered on), you can simply press
the Backup button on the enclosure to launch the
software and begin backing up selected les.
• Allow the backup to continue while the status screen is displayed. (Or click
Abort if you need to interrupt or stop the process.)
• When the backup message displays, click Close.
• If you last set to your options in order to back up modied les only, the
program will only back up the les that have been modied since your previous
backup operation, which will save you more time without having to back up all
needed les again.
Shown:
Model
130295
8
RESTORING BACKED-UP FILES
1. When the JMicron icon displays on the desktop (as shown on Page 5), double-
click it to launch the program (or go to Start / Programs / JMicron Storage on
your desktop).
2. When the backup program is opened, the Welcome screen presents two options
for Backup Files: Backup or Restore. To restore a backed-up le, select it from
the drop-down menu in the USB Device panel (below, right-hand side).
3. When the desired folder is selected (check the box), the les corresponding to
the backed-up les will display in the “Path” window of the Host panel (above,
left-hand side). Select the backup le(s) you want to restore (check the box or
boxes) and click Restore.
4. A progr
ess bar will display to indicate the status of the restoration process. After
all backed-up les are restored and the “Restore” message displays, click Close
to nish, then go to the intended directory folder to conrm that the appearance
of the restored le(s).
9
UNINSTALLING THE BACKUP SOFTWARE
1. Go to Control Panel / Programs / Uninstall a program / JMicron One Touch
Backup. Click Uninstall or Remove to continue, then click Yes.
2. When the uninstall is complete, you’ll be prompted to restart your computer.
Close all programs and click Finish to restart your computer.
