Product Detail Manual
2014-10-22
: Pdf 131781-Attachment 1 131781-Attachment_1 Batch9 unilog
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Cable and Wire Management: Lay-In Wireway Lay-In NEMA Type 1 Galvanized Wireway Spec-00134 G PH (763) (763) 422-2600 422-2211 FX Cable and Wire Management Lay-In Wireway Lay-In NEMA Type 1 Galvanized Wireway Lay-In Galvanized Wireway, NEMA Type 1 Industry Standards Features NEMA/EEMAC: Type 1 IEC 60529, IP30 •• •• •• •• •• Application Specifications UL 870 Listed; File No. E27524 cUL Listed per CSA C22.2 No. 26; File No. E27524 F lat cover design Open top assembly Available with or without knockouts Keyhole screw slots on flat covers Knockouts on wireway sides This galvanized wireway features an open design on one side so wires •• 16 or 14 gauge galvanized steel covers and bodies and cables can be laid in safely along the entire run without pulling. A Finish variety of lengths and fittings accommodate design requirements. Unpainted galvanized steel This drawing illustrates how most of the Hoffman NEMA Type 1 lay-in wireway sections and fittings could be used in an actual wireway run. The covers have been omitted to present the lay-in feature more clearly. Many different sections and fittings can be combined in any configuration desired. Subject to change without notice PH (763) 422-2211 • FX (763) 422-2600 • hoffmanonline.com © 2010 Pentair Technical Products Spec-00134 G 1 Cable and Wire Management: Lay-In Wireway Lay-In NEMA Type 1 Galvanized Wireway Standard Product Selection Matrix Description 12.00-in. (305-mm) Straight Section with knockouts 12.00-in. (305-mm) Straight Section without knockouts 18.00-in. (455-mm) Straight Section without knockouts 24.00-in. (610-mm) Straight Section with knockouts 24.00-in. (610-mm) Straight Section without knockouts 24.00-in. (610-mm) Straight Section without knockouts 36.00-in. (914-mm) Straight Section without knockouts 48.00-in. (1219-mm) Straight Section with knockouts 48.00-in. (1219-mm) Straight Section without knockouts 60.00-in. (1524-mm) Straight Section with knockouts 60.00-in. (1524-mm) StraightS ection without knockouts 72.00-in. (1829-mm) Straight Section with knockouts 72.00-in. (1829-mm) Straight Section without knockouts 120.00-in. (3048-mm) Straight Section with knockouts 120.00-in. (3048-mm) Straight Section without knockouts 90° Flush Tee Sweep Tee Cross Fitting 90° Sweep Elbow 90° Elbow-Tee-Cross 90° Elbow 90° Elbow Outside Opening 90° Elbow Outside Opening 45° Elbow Telescope Fitting a Panel Adapter Closure Plate with knockouts Closure Plate without knockouts Reducer Drop and Bracket Hanger Support Hanger Universal U-Connector a Not UL/cUL listed. 2 2.50 x 2.50 in. (64 x 64 mm) — 4.00 x 4.00 in. (102 x 102 mm) F44T112GVWK 6.00 x 6.00 in. (152 x 152 mm) F66T112GVWK 8.00 x 8.00 in. (203 x 203 mm) F88T112GVWK 10.00 x 10.00 in. (254 x 254 mm) — 12.00 x 12.00 in. (305 x 305 mm) — F22T112GV F44T112GV F66T112GV F88T112GV F1010T112GV F1212T112GV — F44T118GV F66T118GV F88T118GV — — F22T124GVWK F44T124GVWK F66T124GVWK F88T124GVWK — — F22T124GV F44T124GV F66T124GV F88T124GV F1010T124GV F1212T124GV F22T136GVWK F44T136GVWK F66T136GVWK F88T136GVWK — — F22T136GV F44T136GV F66T136GV F88T136GV F1010T136GV F1212T136GV — F44T148GVWK F66T148GVWK F88T148GVWK — — F22T148GV F44T148GV F66T148GV F88T148GV F1010T148GV F1212T148GV F22T160GVWK F44T160GVWK F66T160GVWK F88T160GVWK — — F22T160GV F44T160GV F66T160GV F88T160GV F1010T160GV F1212T160GV — F44T172GVWK F66T172GVWK F88T172GVWK — — — F44T172GV F66T172GV F88T172GV F1010T172GV — F22T1120GVWK F44T1120GVWK F66T1120GVWK F88T1120GVWK — — F22T1120GV F44T1120GV F44T1120GV F88T1120GV F1010T1120GV F1212T1120GV F22GTGV F22TGV F22XGV F2290SEGV F2290TXGV F2290EGV F2290EINGV F2290EOUTGV F2245EGV F22GAGV F22GPAGV F22GCPGV F22GCPNKGV — F44GTGV F44TGV F44XGV F4490SEGV F4490TXGV F4490EGV F4490EINGV F4490EOUTGV F4445EGV F44GAGV F44GPAGV F44GCPGV F44GCPNKGV F44G22R F66GTGV F66TGV F66XGV F6690SEGV F6690TXGV F6690EGV F6690EINGV F6690EOUTGV F6645EGV F66GAGV F66GPAGV F66GCPGV F66GCPNKGV F66G44R F88GTGV F88TGV F88XGV F8890SEGV F8890TXGV F8890EGV F8890EINGV F8890EOUTGV F8845EGV F88GAGV F88GPAGV F88GCPGV F88GCPNKGV F88G66R F1010GTGV F1010TGV F1010XGV F101090SEGV F101090TXGV F101090EGV F101090EINGV F101090EOUTGV F101045EGV F1010GAGV F1010GPAGV — F1010GCPNKGV F1010G88R F22GDB F22GSHGV F22GUCGV F44GDB F44GSHGV F44GUCGV F66GDB F66GSHGV F66GUCGV F88GDB F88GSHGV F88GUCGV F1010GDB F1010GSHGV F1010GUCGV F1212GTGV F1212TGV F1212XGV F121290SEGV F121290TXGV F121290EGV F121290EINGV F121290EOUTGV F121245EGV F1212GAGV F1212GPAGV F1212GCPGV F1212GCPNKGV F1212G88R 1212G1010R F1212GDB F1212GSHGV F1212GUCGV Subject to change without notice PH (763) 422-2211 • FX (763) 422-2600 • hoffmanonline.com © 2010 Pentair Technical Products Spec-00134 G Cable and Wire Management: Lay-In Wireway Lay-In NEMA Type 1 Galvanized Wireway Straight Section Available in lengths from 12.00 in. (305 mm) to 120.00 in. (3048 mm), with or without knockouts. Bulletin: F40, F40G Straight Sections Catalog Number F22T112GV F22T124GVWK F22T124GV F22T136GVWK F22T136GV F22T148GV F22T160GVWK F22T160GV F22T1120GVWK F22T1120GV F44T112GVWK F44T112GV F44T118GV F44T124GVWK F44T124GV F44T136GVWK F44T136GV F44T148GVWK F44T148GV F44T160GVWK F44T160GV F44T172GVWK F44T172GV F44T1120GVWK F44T1120GV F66T112GVWK F66T112GV F66T118GV F66T124GVWK F66T124GV F66T136GVWK F66T136GV F66T148GVWK F66T148GV F66T160GVWK F66T160GV F66T172GVWK F66T172GV F66T1120GVWK F66T1120GV F88T112GVWK F88T112GV F88T118GV F88T124GVWK F88T124GV F88T136GVWK F88T136GV F88T148GVWK F88T148GV AxBxC in. 2.50 x 2.50 x 12.00 2.50 x 2.50 x 24.00 2.50 x 2.50 x 24.00 2.50 x 2.50 x 36.00 2.50 x 2.50 x 36.00 2.50 x 2.50 x 48.00 2.50 x 2.50 x 60.00 2.50 x 2.50 x 60.00 2.50 x 2.50 x 120.00 2.50 x 2.50 x 120.00 4.00 x 4.00 x 12.00 4.00 x 4.00 x 12.00 4.00 x 4.00 x 18.00 4.00 x 4.00 x 24.00 4.00 x 4.00 x 24.00 4.00 x 4.00 x 36.00 4.00 x 4.00 x 36.00 4.00 x 4.00 x 48.00 4.00 x 4.00 x 48.00 4.00 x 4.00 x 60.00 4.00 x 4.00 x 60.00 4.00 x 4.00 x 72.00 4.00 x 4.00 x 72.00 4.00 x 4.00 x 120.00 4.00 x 4.00 x 120.00 6.00 x 6.00 x 12.00 6.00 x 6.00 x 12.00 6.00 x 6.00 x 18.00 6.00 x 6.00 x 24.00 6.00 x 6.00 x 24.00 6.00 x 6.00 x 36.00 6.00 x 6.00 x 36.00 6.00 x 6.00 x 48.00 6.00 x 6.00 x 48.00 6.00 x 6.00 x 60.00 6.00 x 6.00 x 60.00 6.00 x 6.00 x 72.00 6.00 x 6.00 x 72.00 6.00 x 6.00 x 120.00 6.00 x 6.00 x 120.00 8.00 x 8.00 x 12.00 8.00 x 8.00 x 12.00 8.00 x 8.00 x 18.00 8.00 x 8.00 x 24.00 8.00 x 8.00 x 24.00 8.00 x 8.00 x 36.00 8.00 x 8.00 x 36.00 8.00 x 8.00 x 48.00 8.00 x 8.00 x 48.00 AxBxC mm 64 x 64 x 305 64 x 64 x 610 64 x 64 x 610 64 x 64 x 914 64 x 64 x 914 64 x 64 x 1219 64 x 64 x 1524 64 x 64 x 1524 64 x 64 x 3048 64 x 64 x 3048 102 x 102 x 305 102 x 102 x 305 102 x 102 x 455 102 x 102 x 610 102 x 102 x 610 102 x 102 x 914 102 x 102 x 914 102 x 102 x 1219 102 x 102 x 1219 102 x 102 x 1524 102 x 102 x 1524 102 x 102 x 1829 102 x 102 x 1829 102 x 102 x 3048 102 x 102 x 3048 152 x 152 x 305 152 x 152 x 305 152 x 152 x 455 152 x 152 x 610 152 x 152 x 610 152 x 152 x 914 152 x 152 x 914 152 x 152 x 1219 152 x 152 x 1219 152 x 152 x 1524 152 x 152 x 1524 152 x 152 x 1829 152 x 152 x 1829 152 x 152 x 3048 152 x 152 x 3048 203 x 203 x 305 203 x 203 x 305 203 x 203 x 455 203 x 203 x 610 203 x 203 x 610 203 x 203 x 914 203 x 203 x 914 203 x 203 x 1219 203 x 203 x 1219 Number of Knockouts, .50 in.-.75 in. — 16 — 24 — — 40 — 80 — 4 — — 8 — 12 — 16 — 20 — 24 — 40 — 4 — — 8 — 12 — 16 — 20 — 24 — 40 — 4 — — 8 — 12 — 16 — Number of Knockouts, 1.00 in.-1.25 in. — — — — — — — — — — 4 — — 8 — 12 — 16 — 20 — 24 — 40 — 4 — — 8 — 12 — 16 — 20 — 24 — 40 — 4 — — 8 — 12 — 16 — F (in.) — 1.06 — 1.06 — — 1.06 — 1.06 — 1.62 — — 1.62 — 1.62 — 1.62 — 1.62 — 1.62 — 1.62 — 1.62 — — 1.62 — 1.62 — 1.62 — 1.62 — 1.62 — 1.62 — 1.62 — — 1.62 — 1.62 — 1.62 — F (mm) — 27 — 27 — — 27 — 27 — 41 — — 41 — 41 — 41 — 41 — 41 — 41 — 41 — — 41 — 41 — 41 — 41 — 41 — 41 — 41 — — 41 — 41 — 41 — Subject to change without notice PH (763) 422-2211 • FX (763) 422-2600 • hoffmanonline.com X (in.) — 6.00 — 6.00 — — 6.00 — 6.00 — 3.00 — — 6.00 — 6.00 — 6.00 — 6.00 — 6.00 — 6.00 — 6.00 — — 6.00 — 6.00 — 6.00 — 6.00 — 6.00 — 6.00 — 3.00 — — 6.00 — 6.00 — 6.00 — X (mm) — 152 — 152 — — 152 — 152 — 76 — — 152 — 152 — 152 — 152 — 152 — 152 — 152 — — 152 — 152 — 152 — 152 — 152 — 152 — 76 — — 152 — 152 — 152 — Y (in.) — 12.00 — 12.00 — — 12.00 — 12.00 — 6.00 — — 12.00 — 12.00 — 12.00 — 12.00 — 12.00 — 12.00 — 12.00 — — 12.00 — 12.00 — 12.00 — 12.00 — 12.00 — 12.00 — 6.00 — — 12.00 — 12.00 — 12.00 — Y (mm) — 305 — 305 — — 305 — 305 — 152 — — 305 — 305 — 305 — 305 — 305 — 305 — 305 — — 305 — 305 — 305 — 305 — 305 — 305 — 152 — — 305 — 305 — 305 — © 2010 Pentair Technical Products Spec-00134 G 3 Cable and Wire Management: Lay-In Wireway Lay-In NEMA Type 1 Galvanized Wireway Catalog Number F88T160GVWK F88T160GV F88T172GVWK F88T172GV F88T1120GVWK F88T1120GV F1010T112GV F1010T124GV F1010T136GV F1010T148GV F1010T160GV F1010T172GV F1010T1120GV F1212T112GV F1212T124GV F1212T136GV F1212T148GV F1212T160GV F1212T1120GV AxBxC in. 8.00 x 8.00 x 60.00 8.00 x 8.00 x 60.00 8.00 x 8.00 x 72.00 8.00 x 8.00 x 72.00 8.00 x 8.00 x 120.00 8.00 x 8.00 x 120.00 10.00 x 10.00 x 12.00 10.00 x 10.00 x 24.00 10.00 x 10.00 x 36.00 10.00 x 10.00 x 48.00 10.00 x 10.00 x 60.00 10.00 x 10.00 x 72.00 10.00 x 10.00 x 120.00 12.00 x 12.00 x 12.00 12.00 x 12.00 x 24.00 12.00 x 12.00 x 36.00 12.00 x 12.00 x 48.00 12.00 x 12.00 x 60.00 12.00 x 12.00 x 120.00 AxBxC mm 203 x 203 x 1524 203 x 203 x 1524 203 x 203 x 1829 203 x 203 x 1829 203 x 203 x 3048 203 x 203 x 3048 254 x 254 x 305 254 x 254 x 610 254 x 254 x 914 254 x 254 x 1219 254 x 254 x 1524 254 x 254 x 1829 254 x 254 x 3048 305 x 305 x 305 305 x 305 x 610 305 x 305 x 914 305 x 305 x 1219 305 x 305 x 1524 305 x 305 x 3048 Number of Knockouts, .50 in.-.75 in. 20 — 24 — 40 — — — — — — — — — — — — — — Number of Knockouts, 1.00 in.-1.25 in. 20 — 24 — 40 — — — — — — — — — — — — — — F (in.) 1.62 — 1.62 — 1.62 — — — — — — — — — — — — — — F (mm) 41 — 41 — 41 — — — — — — — — — — — — — — X (in.) 6.00 — 6.00 — 6.00 — — — — — — — — — — — — — — X (mm) 152 — 152 — 152 — — — — — — — — — — — — — — Galvanized 90-Degree Flush Tee For flush mounting against a vertical or horizontal surface. Bulletin: F40GF Catalog Number F22GTGV F44GTGV F66GTGV F88GTGV F1010GTGV F1212GTGV For large radius turns. Mounts against vertical or horizontal surfaces. Top and inside covers removable. Catalog Number F22TGV Bulletin: F40GF F44TGV F66TGV F88TGV F1010TGV F1212TGV 4 Subject to change without notice PH (763) 422-2211 • FX (763) 422-2600 • hoffmanonline.com AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 Y (mm) 305 — 305 — 305 — — — — — — — — — — — — — — G in./mm 4.50 114 6.00 152 8.00 203 10.00 254 12.00 305 14.00 356 AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 Galvanized Sweep Tee Y (in.) 12.00 — 12.00 — 12.00 — — — — — — — — — — — — — — J in./mm 6.50 165 8.00 203 10.00 254 12.00 305 14.00 356 16.00 406 © 2010 Pentair Technical Products Spec-00134 G V in./mm 10.35 263 11.85 301 13.85 352 15.84 402 17.84 453 19.84 504 Cable and Wire Management: Lay-In Wireway Lay-In NEMA Type 1 Galvanized Wireway Galvanized Cross Fitting For routing cables in four directions. Top, bottom and side covers removable. Catalog Number F22XGV Bulletin: F40GF F44XGV F66XGV F88XGV F1010XGV F1212XGV AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 V in./mm 10.35 263 11.85 301 13.85 352 15.84 402 17.84 453 19.84 504 AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 L in./mm 7.91 201 9.41 239 11.34 288 13.44 341 15.62 395 17.44 443 Galvanized 90-Degree Sweep Elbow 90-Degree Sweep Elbow for large-radius turns. Bulletin: F40GF Catalog Number F2290SEGV F4490SEGV F6690SEGV F8890SEGV F101090SEGV F121290SEGV Galvanized 90-Degree Elbow-Tee-Cross Forms left or right 90-degree turns. Can be used as a tee or cross. Use with open adapter for cable entrance in top and bottom. Includes two closure plates. Bulletin: F40GF Catalog Number F2290TXGV F4490TXGV F6690TXGV F8890TXGV F101090TXGV F121290TXGV AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 Subject to change without notice PH (763) 422-2211 • FX (763) 422-2600 • hoffmanonline.com G in./mm 4.50 114 6.00 152 8.00 203 10.00 254 12.00 305 14.00 356 K in./mm 2.25 57 3.00 76 4.00 102 5.00 127 6.00 152 7.00 178 © 2010 Pentair Technical Products Spec-00134 G 5 Cable and Wire Management: Lay-In Wireway Lay-In NEMA Type 1 Galvanized Wireway Galvanized 90-Degree Elbow Any side can be removed, retaining lay-in feature regardless of how the elbow is oriented. Sides are held together with screws. Catalog Number F2290EGV Bulletin: F40GF F4490EGV F6690EGV F8890EGV F101090EGV F121290EGV Galvanized 90-Degree Elbow—Outside Opening For continuous run with 90-degree turns. Top, bottom and outside covers removable. Bulletin: F40GF Catalog Number F2290EOUTGV F4490EOUTGV F6690EOUTGV F8890EOUTGV F101090EOUTGV F121290EOUTGV AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 G in./mm 4.50 114 6.00 152 8.00 203 10.00 254 12.00 305 14.00 356 AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 U in./mm 6.50 165 8.00 203 10.00 254 12.00 305 14.00 356 16.00 406 AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 U in./mm 6.50 165 8.00 203 10.00 254 12.00 305 14.00 356 16.00 406 AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 H in./mm 2.75 70 3.38 86 4.25 108 5.06 129 6.00 152 6.75 171 Galvanized 90-Degree Elbow—Inside Opening For continuous run with 90-degree turns. Top and inside covers removable. Catalog Number F2290EINGV Bulletin: F40GF F4490EINGV F6690EINGV F8890EINGV F101090EINGV F121290EINGV Galvanized 45-Degree Elbow Any side can be removed, retaining lay-in feature regardless of how the elbow is oriented. Sides are held together with screws. Catalog Number F2245EGV Bulletin: F40GF F4445EGV F6645EGV F8845EGV F101045EGV F121245EGV 6 Subject to change without notice PH (763) 422-2211 • FX (763) 422-2600 • hoffmanonline.com © 2010 Pentair Technical Products Spec-00134 G Cable and Wire Management: Lay-In Wireway Lay-In NEMA Type 1 Galvanized Wireway Galvanized Telescope Fitting Length easily adjusts to approximately 12.00 in. (305 mm). No cutting or welding required. Bulletin: F40GF Catalog Number F22GAGV AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 F44GAGV F66GAGV F88GAGV F1010GAGV F1212GAGV Not UL/cUL listed. Galvanized Panel Adapter Catalog Number F22GPAGV F44GPAGV F66GPAGV F88GPAGV F1010GPAGV F1212GPAGV G (in.) 4.50 6.00 8.00 10.00 12.00 14.00 Galvanized Closure Plate, With and Without Knockouts Catalog Number F22GCPGV Closes the end of a wireway section or run. F22GCPNKGV AxB in./mm 2.00 x 2.00 64 x 64 2.00 x 2.00 64 x 64 4.00 x 4.00 102 x 102 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 12.00 x 12.00 305 x 305 A flanged fitting which allows the wireway to be securely connected to an enclosure. Bulletin: F40GF Bulletin: F40GF F44GCPGV F44GCPNKGV F66GCPGV F66GCPNKGV F88GCPGV F88GCPNKGV F1010GCPNKGV F1212GCPGV F1212GCPNKGV Subject to change without notice PH (763) 422-2211 • FX (763) 422-2600 • hoffmanonline.com G (mm) 114 152 203 254 305 356 Knockouts With knockouts Without knockouts With knockouts Without knockouts With knockouts Without knockouts With knockouts Without knockouts Without knockouts With knockouts Without knockouts © 2010 Pentair Technical Products Spec-00134 G 7 Cable and Wire Management: Lay-In Wireway Lay-In NEMA Type 1 Galvanized Wireway Reducer Catalog Number F44G22R Reduces wireway to a smaller size. Bulletin: F40PF AxB in./mm 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 12.00 x 12.00 305 x 305 F66G44R F88G66R F1010G88R F1212G88R F1212G1010R Galvanized Support Hanger Catalog Number F22GSHGV F44GSHGV F66GSHGV F88GSHGV F1010GSHGV F1212GSHGV For floor or wall installations. Bulletin: F40GF M (in.) 4.62 6.12 8.12 10.12 12.12 14.12 M (mm) 117 155 206 257 308 359 Drop and Bracket Hangers Drop and bracket hangers support a wireway run. Bulletin: F40PF Catalog Number F22GDB F44GDB F66GDB F88GDB F1010GDB F1212GDB N max. (in.) 8.50 10.50 15.00 21.00 22.00 23.00 N max. (mm) 216 267 381 533 559 584 P (in.) 4.50 6.00 7.12 10.81 13.81 15.56 P (mm) 114 152 181 275 335 395 R (in.) 3.38 4.12 5.12 7.00 8.38 9.78 R (mm) 86 105 130 178 213 248 S (in.) 7.25 9.25 13.75 13.75 13.75 13.75 S (mm) 184 235 349 349 349 349 T (in.) 3.75 4.50 5.50 7.75 10.25 12.50 T (mm) 95 114 140 197 260 318 Galvanized Universal U-Connector Joins wireway sections and fittings. Top swings aside to retain the layin feature. One U-connector required at each wireway joint except telescope fittings, panel adapters, open adapters, closure plates or reducers. Bulletin: F40GF Catalog Number F22GUCGV F44GUCGV F66GUCGV F88GUCGV F1010GUCGV F1212GUCGV 8 Subject to change without notice PH (763) 422-2211 • FX (763) 422-2600 • hoffmanonline.com AxB in./mm 2.50 x 2.50 64 x 64 4.00 x 4.00 102 x 102 6.00 x 6.00 152 x 152 8.00 x 8.00 203 x 203 10.00 x 10.00 254 x 254 12.00 x 12.00 305 x 305 © 2010 Pentair Technical Products Spec-00134 G
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Format : application/pdf Producer : Adobe PDF Library 9.0; modified using iText® 5.2.0 ©2000-2012 1T3XT BVBA Keywords : HOFFMAN,F101090EINGV,340352,none,RUNWAY,446411,340352,US,Spec Sheet,,none,07/05/2012,07/05/2012, Create Date : 2010:08:24 14:55:15-05:00 Modify Date : 2012:07:13 10:22:00-05:00 Creator Tool : Adobe InDesign CS4 (6.0.5) Page Layout : SinglePage Page Count : 8 Creator : Adobe InDesign CS4 (6.0.5) Trapped : FalseEXIF Metadata provided by EXIF.tools