1.3.2.5 Packet Tracer Investigating Directly Connected Routes Instructions
1.3.2.5%20Packet%20Tracer%20-%20Investigating%20Directly%20Connected%20Routes%20Instructions
1.3.2.5%20Packet%20Tracer%20-%20Investigating%20Directly%20Connected%20Routes%20Instructions
User Manual: Pdf
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
Packet Tracer - Investigating Directly Connected Routes Topology Objectives Part 1: Investigate IPv4 Directly Connected Routes Part 2: Investigate IPv6 Directly Connected Routes Background The network in the activity is already configured. You will log in to the routers and use show commands to discover and answer the questions below about the directly connected routes. Note: The user EXEC password is cisco and the privileged exec password is class. Part 1: Investigate IPv4 Directly Connected Routes Step 1: Use show commands to gather information about the IPv4 directly connected networks. Enter the following command on R1: R1> show ip route ? a. What option would be most beneficial in determining the networks assigned to the interfaces of the router? b. Which networks are directly connected on R1? Hint: Use the option determined above. c. Which IP addresses are assigned to the LAN interfaces on R1? © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 3 Investigating Directly Connected Routes d. Which networks are directly connected on R2? e. Which IP addresses are assigned to the LAN interfaces on R2? Step 2: Verify PC addressing and test connectivity. a. Open a command prompt on PC1. Issue the command to display the IP settings. Based on the output, would you expect PC1 to be able to communicate with all interfaces on the router? Provide a short answer describing your expectations. b. Open a command prompt on PC2. Issue the command to display the IP settings. Based on the output, would you expect PC2 to be able to communicate with PC1? Verify your expectations. c. Determine the IP addresses of PC3 and PC4. Record the results and determine if PC3 and PC4 are able to communicate. d. Test connectivity from PC1 to PC3. Was the test successful? e. Bonus: Looking at the outputs of the routing tables on R1 and R2, what might indicate a reason for the success or failure of communication between PC1 and PC3? Part 2: Investigate IPv6 Directly Connected Routes Step 1: Use show commands to gather information about the IPv6 directly connected networks. a. Which IPv6 networks are available on R1? b. Which IPv6 unicast addresses are assigned to the LAN interfaces on R1? © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 3 Investigating Directly Connected Routes c. Which IPv6 networks are available on R2? d. Which IPv6 addresses are assigned to the LAN interfaces on R2? Step 2: Verify PC settings and connectivity. a. Open a command prompt on PC1. Issue the command to display the IPv6 settings. Based on the output, would you expect PC1 to be able to communicate with all interfaces on the router? Provide a short answer describing your expectations b. Open a command prompt on PC2. Issue the command to display the IPv6 settings. Based on the output, would you expect PC2 to be able to communicate with PC1? Verify your expectations. c. Determine the IPv6 addresses of PC3 and PC4. Record the results and determine if PC3 and PC4 are able to communicate. d. Test connectivity from PC1 to PC3. Was the test successful? e. Bonus: What might indicate a reason for the success or failure of communication between PC1 and PC3 after looking at the outputs of the IPv6 routing tables on R1 and R2? Suggested Scoring Rubric Activity Section Part 1: Investigate IPv4 Directly Connected Routes Part 2: Investigate IPv6 Directly Connected Routes Question Location Possible Points Step 1 25 Step 2 25 Step 1 25 Step 2 25 Total Score 100 © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Earned Points Page 3 of 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Tagged PDF : Yes Signing Date : 2013:07:14 10:22:27-07:00 Signing Authority : ARE Acrobat Product v8.0 P23 0002337 Document Usage Rights : FullSave Annotation Usage Rights : Create, Delete, Modify, Copy, Import, Export Form Usage Rights : Add, FillIn, Delete, SubmitStandalone Signature Usage Rights : Modify XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2013:07:14 10:08:35-07:00 Creator Tool : Microsoft® Word 2010 Modify Date : 2013:07:14 10:22:27-07:00 Metadata Date : 2013:07:14 10:22:27-07:00 Format : application/pdf Creator : Betty Staerk Producer : Microsoft® Word 2010 Document ID : uuid:83128e93-409f-4161-928c-e758418a109f Instance ID : uuid:b437523e-8567-4b33-bb95-362ee29c47c7 Has XFA : Yes Page Count : 3 Language : en-US Author : Betty StaerkEXIF Metadata provided by EXIF.tools