134064 Catalog
155184-Catalog 155184-Catalog 155184-Catalog 662019 Batch8 unilog cesco-content
2014-10-23
: Pdf 134064-Catalog 134064-Catalog Batch9 unilog
Open the PDF directly: View PDF .
Page Count: 792
Download | |
Open PDF In Browser | View PDF |
Main catalog Motor protection and control Manual motor starters, contactors and overload relays Motor rated operational powers and currents The currents given below concern standard three-phase four-pole cage motors (1500 r.p.m. at 50 Hz 1800 r.p.m. at 60 Hz). These values are given for guidance and may vary according to the motor manufacturer and depending on the number of poles. Motor nominal current: standardized values in blue colour (according to IEC 60947-4-1 Annex G) UL / CSA Motor nominal current: standardized values (according to IEC 60947-4-1 Annex G and UL 508) Motor power 220 V 230 V 240 V 380 V 400 V 415 V 440 V 500 V 660 V 690 V Motor power 208 V 220-240 V 380-415 V 440-480 V kW A A A A A A A A A A hp A A A A A 0.06 0.09 0.12 0.18 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 200 250 315 355 400 500 560 630 710 800 900 1000 0.37 0.54 0.73 1 1.6 2.0 2.7 3.5 4.9 6.6 8.9 11.8 15.7 20.9 28.2 39.7 53.3 63.8 75.3 100 120 146 177 240 291 355 418 509 637 782 983 1109 1255 1545 1727 1928 2164 2446 2760 3042 0.35 0.52 0.7 1 1.5 1.9 2.6 3.3 4.7 6.3 8.5 11.3 15 20 27 38 51 61 72 96 115 140 169 230 278 340 400 487 609 748 940 1061 1200 1478 1652 1844 2070 2340 2640 2910 0.34 0.50 0.67 1 1.4 1.8 2.5 3.2 4.5 6 8.1 10.8 14.4 19.2 25.9 36.4 48.9 58.5 69 92 110 134 162 220 266 326 383 467 584 717 901 1017 1150 1416 1583 1767 1984 2243 2530 2789 0.21 0.32 0.46 0.63 0.9 1.2 1.6 2.0 2.8 3.8 5.2 6.8 8.9 12.1 16.3 23.2 30.5 36.8 43.2 57.9 69 84 102 139 168 205 242 295 368 453 568 642 726 895 1000 1116 1253 1417 1598 1761 0.2 0.3 0.44 0.6 0.85 1.1 1.5 1.9 2.7 3.6 4.9 6.5 8.5 11.5 15.5 22 29 35 41 55 66 80 97 132 160 195 230 280 350 430 540 610 690 850 950 1060 1190 1346 1518 1673 0.19 0.29 0.42 0.58 0.82 1.1 1.4 1.8 2.6 3.5 4.7 6.3 8.2 11.1 14.9 21.2 28 33.7 39.5 53 64 77 93 127 154 188 222 270 337 414 520 588 665 819 916 1022 1147 1297 1463 1613 0.18 0.26 0.39 0.53 0.74 1 1.3 1.7 2.4 3.2 4.3 5.7 7.4 10.1 13.6 19.3 25.4 30.7 35.9 48.2 58 70 85 116 140 171 202 245 307 377 473 535 605 745 832 929 1043 1179 1330 1466 0.16 0.24 0.32 0.48 0.68 0.88 1.2 1.5 2.2 2.9 3.9 5.2 6.8 9.2 12.4 17.6 23 28 33 44 53 64 78 106 128 156 184 224 280 344 432 488 552 680 760 848 952 1076 1214 1339 0.13 0.18 0.24 0.37 0.51 0.67 0.91 1.15 1.7 2.2 2.9 4 5.1 7 9.3 13.4 17.8 22 25.1 33.5 40.8 49.1 59.6 81 97 118 140 169 212 261 327 370 418 515 576 643 721 815 920 1014 0.12 0.17 0.23 0.35 0.49 0.64 0.87 1.1 1.6 2.1 2.8 3.8 4.9 6.7 8.9 12.8 17 21 24 32 39 47 57 77 93 113 134 162 203 250 313 354 400 493 551 615 690 780 880 970 1/2 3/4 1 1-1/2 2 3 5 7-1/2 10 15 20 25 30 40 50 60 75 100 125 150 200 250 300 350 400 450 500 2.4 3.5 4.6 6.6 7.5 10.6 16.7 24.2 30.8 46.2 59.4 74.8 88 114 143 169 211 273 343 396 528 – – – – – – 2.2 3.2 4.2 6 6.8 9.6 15.2 22 28 42 54 68 80 104 130 154 192 248 312 360 480 604 722 828 954 1030 1180 1.3 1.8 2.3 3.3 4.3 6.1 9.7 14 18 27 34 44 51 66 83 103 128 165 208 240 320 403 482 560 636 – 786 1.1 1.6 2.1 3 3.4 4.8 7.6 11 14 21 27 34 40 52 65 77 96 124 156 180 240 302 361 414 477 515 590 0.9 1.3 1.7 2.4 2.7 3.9 6.1 9 11 17 22 27 32 41 52 62 77 99 125 144 192 242 289 336 382 412 472 550-600 V 1SBC101589S0201 IEC Motor protection and control Manual motor starters, contactors and overload relays 1 Overview 2 Manual motor starters 3 B mini contactors 4 AS contactors with screw terminals 5 AF, A and EK contactors with screw terminals 6 AS and AF contactors with spring terminals 7 Overload relays 8 DRAS Enclosed starter 9 R contactors 10 Motor management system 11 S800 self resetting current limiting module 12 General technical data 13 Index 14 Summary_1 Marketing material 1SBC100192C0201 - Edition july 2014 ABB | 1/1 ABB sets a new standard in motor control and power switching 1 Featuring AF technology as standard, the latest range of ABB's contactors establishes a new industry benchmark. The electronically controlled coil offers multiple benefits over conventional alternatives, and together with ABB's wide product offering – an optimal configuration, every time. Access Global Support The contactor and motor protection range from ABB is compatible with all major national and international standards and is available worldwide via a global distribution network. One contactor coil now handles 100 V – 250 V, AC/DC for use in Europe or Asia as well as North America. Optimize logistics With its contactor and motor protection range, ABB has managed to reduce the number of contactor coils to just four. The total number of product variants has been reduced by up to 90%. This simplifies the customers' logistics and cuts administration costs. Simplify design By reducing contactor coil energy consumption by up to 80%, panels can be built smaller and transformers more compact. All the features of the AF technology, along with access to drawings and coordination tables online, simplifies your design and assembly process. Secure uptime Time to prevent stoppages caused by voltage fluctuations. The AF contactor ensures distinct operation in unstable networks and signifies a major advance in motor control and power switching. Voltage sags, dips and surges pose no threat. The AF contactor secures your uptime. 1/2 | ABB 1 MacGregor. Keeping turnarounds brief. Until the AF range was installed, voltage sags were affecting MacGregor's deck cranes. Conventional contactors welded shut, leading to several stoppages a week. No longer. Known for superior quality and an ability to operate in the most hostile environments, MacGregor deck cranes enjoy a global reputation for reliability. A small but vital component, the AF contactor helps maintain this reputation. To keep things moving, you need Control. Connect to Control. Explore all our case studies at www.abb.com/connecttocontrol SSAB Making certainty standard Gamesa Taming the wind LKAB Providing fresh air ABB | 1/3 Contactors and motor protection For a wide variety of segments 1 HVAC, General Machinery, Rail, Critical Power, Wind, Solar, Marine and Water & Wastewater Contactors for any use The AF contactor range covers small motor starting solutions from 4 kW / 5 hp up to big power switching solutions with our unique AF2650, the biggest single case block contactor in the world. The contactor and motor protection range is part of one of the widest product offerings on the market meaning that ABB not only can provide the contactor but the full solution. In addition to the standard product range ABB also offer products for special needs such as Bar contactors, GAF and contactors for capacitor switching. 1/4 | ABB Cooperating with customers ABB cooperates closely with its customers to ensure that products meet requirements from their specific segments and applications. With over 100 years' experience in motor control and power switching ABB knows how to create efficient solutions for its customers. AF technology Benefits 1 Reliable in all networks The electronic system within the AF contactor rectifies the AC or DC control circuit voltage to a DC control voltage that is applied on the coil. The contactor is safely operated in an always optimized condition making it virtually noise free. Four coils for the entire voltage range The AF contactor features both AC and DC support. With the complete AF contactor range, functionality is improved. Still, the total number of product variants compared to a conventional range is reduced by 90 %. Only four coils are required to cover 24 V AC, 20 V DC - 500 V AC/DC. Wide control voltage range With conventional contactor technology, different contactors were needed for different network voltages. Thanks to the wide operating range of the AF contactor it can operate just as well in Europe as in Asia or North America. The core coil of the AF contactor range covers 100-250 V AC/DC 50/60 Hz. Built-in surge suppression With conventional contactor technology it is recommended to use an external surge suppressor, an accessory that could cost as much as half the contactor itself. With the AF technology the surges are handled by the contactor itself and the surge never reaches the control circuit. Neither the surge suppressor nor the actual surge has to be considered anymore. One less product and one less complication to worry about. ABB | 1/5 Contactors and motor protection Advanced but simple 1 The AF contactor is compact The AF contactor is compact in size and has had its width reduced by up to 30 % thanks to an 80 % reduction of the coil‘s energy consumption. The AF contactor is flexible AF09 ... AF370 is perfect for motor starting applications and for solutions where space is limited. Interlocked reversing pairs require no spacing between contactors meaning you can fit more functionality into cabinets or other small enclosures. Coil terminal access in the front The AF contactor has its coil terminals accessible from the front. The cables or bars do not have to be disconnected in order to perform voltage measurement or servicing work. More functionality without adding width The AF116 ... AF2650 can take up to 2 side mounted auxiliary contact blocks without adding to its width and are delivered with 1 N.O. + 1 N.C. as standard. 1/6 | ABB Contactors and motor protection Mechanical features 1 Easy-to-use accessories Contactors up to 96 A offer free choice of coil terminal access and can take side and front mounted auxiliary contact blocks. All the accessories: Coil connection terminals, mechanical and electrical interlocks and electronic timers are easily connected through the snap-to-connect function. Top-mounted Bottom-mounted Additional LDC4 coil terminal block Front-mounted Safe control circuit with: – – Mirror contact according to IEC 60947-4-1 –– Mechanically linked contacts according to IEC 60947-5-1 –– Sealable and transparent protective covers on AF09 ... AF96 and overload relays TF/EF ABB | 1/7 3-pole contactors Mini contactors Contactors for motor control and 1 IEC (1) AC-3 Rated operational power θ ≤ 60 °C (2), 400 V kW 480 V UL/CSA 3-phase motor rating hp 4 5.5 4 5.5 7.5 4 5.5 7.5 11 15 18.5 3 5 5 7.5 10 5 7.5 10 15 20 25 AC / DC Control supply Type — — — — — AF09 AF12 AF16 AF26 AF30 AF38 AC Control supply Type B6 B7 AS09 AS12 AS16 AF09 AF12 AF16 AF26 AF30 AF38 DC Control supply Type BC6 BC7 ASL09 ASL12 ASL16 AF09 AF12 AF16 AF26 AF30 AF38 IEC AC-3 Rated operational current θ ≤ 60 °C (2), 400 V A 8.5 11.5 9 12 15.5 9 12 18 26 32 AC-1 Rated operational current θ ≤ 40 °C, 690 V A 20 (400 V) 20 22 24 24 25 28 30 45 50 50 A 12 (300 V) 16 20 20 20 25 28 30 45 50 50 — 00 00 0 00 0 — 1 — — UL/CSA General use rating NEMA 600 V — NEMA Size (400 V) 38 (1) 1000 V IEC ratings available for AF146 ... AF2650 contactors. (2) θ ≤ 55 °C for mini contactors and AF400 ... AF2650 contactors. Main accessories Auxiliary contact blocks Front mounting CAF6 Side mounting CA6 Timers Electronic Interlocking units (3) Mechanical CA3-10 (1 x N.O.) CA3-01 (1 x N.C.) CA4-10 (1 x N.O.) CA4-01 (1 x N.C.) CAL4-11 (1 x N.O. + 1 x N.C.) TEF3-ON TEF3-OFF VM3 TEF4-ON TEF4-OFF VM4 Mechanical / Electrical VEM4 Connection sets For reversing contactors BSM6-30 BER16C-3 BER16-4 Surge suppressors Varistor (AC/DC) RV-BC6 RV5 Built-in surge protection RC type (AC) Transil diode (DC) (24…440 V) BER38-4 RC5-1 (24…440 V) RD7 RT5 (12…264 V) (3) See available reversing contactors VB6, VB7 and VAS09 ... VAS16. Overload relays Thermal relays Class 10 T16 Electronic relays Class 10E, 20E, 30E E16DU (0.10…18.9 A) (Class 10A for TF140, TA200DU) (0.10…16 A) T16 (0.10…16 A) TF42 (0.10…38 A) EF19 (0.10…18.9 A) EF19 (0.10…18.9 A) EF45 (9…45 A) Manual motor starters Thermal / magnetic protection MS116 (0.10…32 A) Ics up to 50 kA for class 10A Class 10 MS132 (0.10…32 A) Ics up to 100 kA MS116 (0.10...32 A) lcs up to 50 kA for class 10 A MS450 (28...50 A) lcs up to 50 kA MS132 (0.10...32 A) lcs up to 100 kA MS497 (22…100 A) Ics up to 100 kA Accessories 1/8 | ABB Magnetic only types MO132 (0.16...32A) MO132 For contactor mounting BEA7/132 BEA16-3 (0.16...32 A) Ics up to 100 kA BEA16-4 BEA38-4 power switching 1 18.5 22 30 37 45 55 75 75 90 110 132 160 200 200 250 315 400 — 475 560 — — 30 50 60 60 75 100 100 125 150 200 250 300 350 400 500 600 — 800 900 — — 40 AF40 AF52 AF65 AF80 AF96 AF116 AF140 AF146 AF190 AF205 AF265 AF305 AF370 AF400 AF460 AF580 AF750 AF1250 AF1350 AF1650 AF2050 AF2650 AF40 AF52 AF65 AF80 AF96 AF116 AF140 AF146 AF190 AF205 AF265 AF305 AF370 AF400 AF460 AF580 AF750 AF1250 AF1350 AF1650 AF2050 AF2650 AF40 AF52 AF65 AF80 AF96 AF116 AF140 AF146 AF190 AF205 AF265 AF305 AF370 AF400 AF460 AF580 AF750 AF1250 AF1350 AF1650 AF2050 AF2650 40 53 116 140 146 190 205 265 305 370 400 460 580 750 860 1050 — — 70 100 105 125 130 160 200 225 275 350 400 500 600 600 700 800 1050 1260 1350 1650 2050 2650 60 80 90 105 115 160 200 200 250 300 350 400 520 550 650 750 900 1210 1350 1650 2100 2700 2 — — 3 — 4 — — — 5 — — — 6 — 7 — — 8 — — 65 80 96 — VM96-4 CAL19-11 (1 x N.O. + 1 x N.C.) CAL18-11 (1 x N.O. + 1 x N.C.) VM19 VM750H VM750V (for same size contactors) BER65-4 BER96-4 BER140-4 BER205-4 TF65 (22...67 A) TF96 TF140DU TA200DU EF65 (20...70 A) EF96 EF146 EF205 (40...96 A) (36...100 A) (66...142 A) θ ≤ 55 °C (54...150 A) — VM1650H BER370-4 BEM460-30 BEM750-30 EF370 EF460 (66...200 A) θ ≤ 55 °C (63...210 A) (115...380 A) (150…500 A) EF750 (250…800 A) E1250DU (375…1250 A) Short-circuit protection devices MCCB and switch-fuses MS495 1SBC101753S0201 - Rev. B (45…100 A) Ics up to 50 kA MO496 (32…100 A) Ics up to 100 kA MO450 (40…50 A) Ics up to 50 kA MO495 (63…100 A) Ics up to 50 kA ABB | 1/9 4-pole contactors Mini contactors 1 AC-1 Rated operational current IEC UL/CSA General use rating Contactor relays A A 16 20 12 (300 V) 16 AC / DC Control supply Type — — AC Control supply Type B6 B7 DC Control supply Type BC6 BC7 θ ≤ 40 °C, 690 V 600 V Mini contactor relays AC-15 Rated operational current IEC UL/CSA Pilot duty 400 V A 3 A600 2 2 R contactors 3 1 4 0 AC Control supply Type K6-22Z K6-31Z K6-40E DC Control supply Type KC6-22Z KC6-31Z KC6-40E AC / DC Control supply Type — — — DC Circuit switching DC-1 Rated current up to 5000 A DC-3/DC-5 Rated current up to 2000 A 1500 V with poles in series IOR.. 63-..-CC to IOR.. 5100-..-CC Specific contactors 1/10 | ABB DC Circuit switching 100 A, 440 V, DC-1 275 to 2050 A, 1000 V, DC-1 GA75, GAE75 types GAF185 to GAF2050 types Contactors 1 25 30 45 55 70 100 125 160 200 275 350 400 500 525 800 1000 25 30 45 55 — — — — — — — — — — 540 — AF09 AF16 AF26 AF38 AF40 AF52 AF80 AF116 AF140 AF190 AF205 AF265 AF305 AF370 — — AF09 AF16 AF26 AF38 AF40 AF52 AF80 AF116 AF140 AF190 AF205 AF265 AF305 AF370 EK550 EK1000 AF09 AF16 AF26 AF38 AF40 AF52 AF80 AF116 AF140 AF190 AF205 AF265 AF305 AF370 EK550 EK1000 Contactor relays 3 3 A600, Q300 A600, Q600 2 2 3 1 4 0 2 2 3 1 4 0 NS22E NS31E NS40E NF22E NF31E NF40E NSL22E NSL31E NSL40E NF22E NF31E NF40E — — — NF22E NF31E NF40E AC Circuit switching Special versions AC-1 Rated current up to 5000 A AC-3 Rated power up to 1500 kW (1520 A - 440 V) AC/DC Coupling: LOR.. contactors IOR.. 63-..-MT to IOR.. 5100-..-MT AC/DC Switching (N.C./N.O. main poles): NOR & JOR contactors Slip ring motor control: FOR .. contactors Field discharge: AM(F)-CC-JORE contactors Latching contactors for energy saving and safety requirements: AMA or AME contactors 1SBC101638S0201 - Rev. C Capacitor switching 12.5 to 80 kvar UA16..RA to UA110..RA types UA16 to UA110 types ABB | 1/11 Summary_2 2 2/0 | ABB Manual motor starters Overview Manual motor starters 2/2 0.10 to 32 A – with thermal and electromagnetic protection 2 I CS up to 50 kA MS116 manual motor starters 2/4 I CS up to 100 kA MS132 manual motor starters 2/5 0.16 to 32 A – with electromagnetic protection MO132 manual motor starters magnetic only 2/6 0.10 to 25 A – with thermal and electromagnetic protection MS132-T circuit breakers for transformer protection 2/7 2/8 2/14 22 to 100 A – with thermal and electromagnetic protection MS450, MS495, MS497 manual motor starters Technical data 2/23 2/24 32 to 100 A – with electromagnetic protection MO450, MO495, MO496 manual motor starters magnetic only Technical data 2/27 2/28 Main accessories 2/31 General accessories 2/38 Summary_2 Technical data Main accessories ABB | 2/1 Manual motor starters 2 Type MS116 MS132 MS450 MS495 Thermal and electromagnetic protection Yes Yes Yes Yes Electromagnetic protection - - - - Phase loss sensitivity Yes Yes Yes Yes Switch position ON/OFF ON/OFF/TRIP ON/OFF/TRIP ON/OFF/TRIP Magnetic trip indication - Yes - - Lockable handle without accessories - Yes Yes Yes Disconnecting feature Yes Yes Yes Yes MS497 Width 45 mm 45 mm 55 mm 70 mm Rated operational current Ie 0.16 ... 32 A 0.16 ... 32 A 40 ... 50 A 63 ... 100 A 32 ... 100 A Setting range 0.1 ... 32 A 0.1 ... 32 A 28 ... 50 A 45 ... 100 A 22 ... 100 A Ambient air temperature -25 ... +55 °C * -25 ... +60 °C * ) ) -20 ... +60 °C * ) -20 ... +60 °C *) * Compensated ) Table for short-circuit ratings for 400 V Standard range High performance range MS116, MS450, MS495 MS132, MS497 Type Type Selection parameters Rated operational power Setting range for thermal release Short-circuit breaking capacity Icu I cs Short-circuit breaking capacity I cu I cs 0.03 kW 0.1 … 0.16 A MS116-0.16 50 kA 50 kA MS132-0.16 100 kA 100 kA 0.06 kW 0.16 … 0.25 A MS116-0.25 50 kA 50 kA MS132-0.25 100 kA 100 kA 0.09 kW 0.25 … 0.4 A MS116-0.4 50 kA 50 kA MS132-0.4 100 kA 100 kA 0.18 kW 0.4 … 0.63 A MS116-0.63 50 kA 50 kA MS132-0.63 100 kA 100 kA 0.25 kW 0.63 … 1.0 A MS116-1.0 50 kA 50 kA MS132-1.0 100 kA 100 kA 0.55 kW 1.0 … 1.6 A MS116-1.6 50 kA 50 kA MS132-1.6 100 kA 100 kA 0.75 kW 1.6 … 2.5 A MS116-2.5 50 kA 50 kA MS132-2.5 100 kA 100 kA 1.5 kW 2.5 … 4.0 A MS116-4.0 50 kA 50 kA MS132-4.0 100 kA 100 kA 2.2 kW 4.0 … 6.3 A MS116-6.3 50 kA 50 kA MS132-6.3 100 kA 100 kA 4.0 kW 6.3 … 10 A MS116-10 50 kA 50 kA MS132-10 100 kA 100 kA 5.5 kW 8 … 12 A MS116-12 25 kA 25 kA MS132-12 100 kA 100 kA 7.5 kW 10 … 16 A MS116-16 16 kA 16 kA MS132-16 100 kA 100 kA 9.0 kW 16 … 20 A MS116-20 15 kA 10 kA MS132-20 100 kA 100 kA 12.5 kW 20 … 25 A MS116-25 15 kA 10 kA MS132-25 50 kA 50 kA 15 kW 25 … 32 A MS116-32 10 kA 10 kA MS132-32 50 kA 25 kA 15 kW 22 … 32 A MS132-32 50 kA 25 kA MS497-32 100 kA 50 kA 18.5 kW 28 … 40 A MS450-40 50 kA 25 kA MS497-40 100 kA 50 kA 22 kW 36 … 45 A MS450-45 50 kA 25 kA MS497-50 100 kA 50 kA 22 kW 40 … 50 A MS450-50 50 kA 25 kA MS497-50 100 kA 50 kA 30 kW 45 … 63 A MS495-63 50 kA 25 kA MS497-63 100 kA 50 kA 37 kW 57 … 75 A MS495-75 50 kA 25 kA MS497-75 100 kA 50 kA 45 kW 70 … 90 A MS495-90 50 kA 25 kA MS497-90 100 kA 50 kA 55 kW 80 … 100 A MS495-100 50 kA 25 kA MS497-100 100 kA 50 kA The currents given above concern standard three-phase four-pole cage motors (1500 r.p.m. at 50 Hz 1800 r.p.m. at 60 Hz). 2/2 | ABB MO132 MO450 MO495 - - - Yes Yes Yes Yes - - - - Yes ON/OFF/TRIP ON/OFF/TRIP ON/OFF/TRIP ON/OFF/TRIP - - - Yes Yes Yes Yes Yes Yes Yes Yes Yes 45 mm 55 mm 70 mm 0.16 ... 32 A 40 ... 50 A 63 ... 100 A - - - 0.1 ... 25 A -25 ... +60 °C -20 ... +60 °C -20 ... +60 °C -25 ... +60 °C *) Standard range High performance range Transformer protection MO132, MO450, MO495 MO132, MO496 MS132-T Type Type Short-circuit breaking capacity Icu Ics MO132-0.16 100 kA 100 kA MO132-0.25 100 kA 100 kA MO132-0.4 100 kA MO132-0.63 MO132-1.0 MO496 MS132-T 2 45 mm 32 ... 100 A Short-circuit breaking capacity 0.16 ... 32 A Type Short-circuit breaking capacity I cu Ics I cu / Ics MO132-0.16 100 kA 100 kA MS132-0.16T 100 kA MO132-0.25 100 kA 100 kA MS132-0.25T 100 kA 100 kA MO132-0.4 100 kA 100 kA MS132-0.4T 100 kA 100 kA 100 kA MO132-0.63 100 kA 100 kA MS132-0.63T 100 kA 100 kA 100 kA MO132-1.0 100 kA 100 kA MS132-1.0T 100 kA MO132-1.6 100 kA 100 kA MO132-1.6 100 kA 100 kA MS132-1.6T 100 kA MO132-2.5 100 kA 100 kA MO132-2.5 100 kA 100 kA MS132-2.5T 100 kA MO132-4.0 100 kA 100 kA MO132-4.0 100 kA 100 kA MS132-4.0T 100 kA MO132-6.3 100 kA 100 kA MO132-6.3 100 kA 100 kA MS132-6.3T 100 kA MO132-10 100 kA 100 kA MO132-10 100 kA 100 kA MS132-10T 100 kA MO132-12 100 kA 100 kA MO132-12 100 kA 100 kA MS132-12T 100 kA MO132-16 100 kA 100 kA MO132-16 100 kA 100 kA MS132-16T 100 kA MO132-20 100 kA 100 kA MO132-20 100 kA 100 kA MS132-20T 100 kA MO132-25 50 kA 50 kA MO132-25 50 kA 50 kA MS132-25T MO132-32 50 kA 25 kA MO132-32 50 kA 25 kA MO132-32 50 kA 25 kA MO496-32 100 kA 50 kA MO450-40 50 kA 25 kA MO496-40 100 kA 50 kA MO450-45 50 kA 25 kA MO496-50 100 kA 50 kA MO450-50 50 kA 25 kA MO496-50 100 kA 50 kA MO495-63 50 kA 25 kA MO496-63 100 kA 50 kA MO495-75 50 kA 25 kA MO496-75 100 kA 50 kA MO495-90 50 kA 25 kA MO496-90 100 kA 50 kA MO495-100 50 kA 25 kA MO496-100 100 kA 50 kA 50 kA Transformer protection: The instantaneous short-circuit current setting is 20 times the rated operational current. For motor protection, an appropriate thermal or electronic overload relay must be used. ABB | 2/3 MS116 manual motor starters 0.10 to 32 A – with thermal and electromagnetic protection Description 2CDC241010F0011 2 MS116-16 Manual motor starters (MMS) are protection devices for the main circuit. They combine motor control and protection in a single device. MMS are used mainly to switch motors manually ON/OFF and protect them and the installation fuse-less against short-circuit, overload and phase failures. Fuse-less protection with a manual motor starter saves costs, space and ensures a quick reaction under short-circuit condition, by switching off the motor within milliseconds. MS116 is a compact and economic range for motor protection up to 15.5 kW (400 V) / 32 A in width of 45 mm. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, threephase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory. Rated instantaneous shortcircuit current setting li A 0.10 ... 0.16 0.16 ... 0.25 0.25 ... 0.40 0.40 ... 0.63 0.63 ... 1.00 1.00 ... 1.60 1.60 ... 2.50 2.50 ... 4.00 4.00 ... 6.30 6.30 ... 10.0 8.00 ... 12.0 10.0 ... 16.0 16.0 ... 20.0 20.0 ... 25.0 25.0 ... 32.0 0.10 ... 0.16 0.16 ... 0.25 0.25 ... 0.40 0.40 ... 0.63 0.63 ... 1.00 1.00 ... 1.60 1.60 ... 2.50 2.50 ... 4.00 4.00 ... 6.30 6.30 ... 10.0 8.00 ... 12.0 10.0 ... 16.0 16.0 ... 20.0 20.0 ... 25.0 25.0 ... 32.0 kA 50 50 50 50 50 50 50 50 50 50 25 16 10 10 10 50 50 50 50 50 50 50 50 50 50 25 16 10 10 10 A 1.56 2.44 3.90 6.14 11.50 18.40 28.75 50.00 78.75 150 180 240 300 375 480 1.56 2.44 3.90 6.14 11.50 18.40 28.75 50.00 78.75 150 180 240 300 375 480 kg 0.225 0.225 0.225 0.225 0.225 0.265 0.265 0.265 0.265 0.265 0.265 0.265 0.310 0.310 0.310 0.240 0.240 0.240 0.240 0.240 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.326 0.326 0.326 79.9 3.15" 69.8 2.75" 1.7" 1.77" 2CDC242001F0011 14 0.55" 45 MS116 ≥ 20 A & MS116-HKF1-11 ≥ 20 A 1.77" 43.3 2CDC131062C0201 14 0.55" 0.22" 2.3" 2.95" 27.5 1.1" 1.77" 45 MS116 ≤ 16 A & MS116-HKF1-11 ≤ 16 A 1.7 0.07" 1.38" 35 14 0.55" 5.5 0.06" 45 1.5 57.8 3.15" 2.76" 1.71" 2.95" 27.5 1.1" 43.5 75 1.7 0.07" 3.54" 90 1SAM250000R1001 1SAM250000R1002 1SAM250000R1003 1SAM250000R1004 1SAM250000R1005 1SAM250000R1006 1SAM250000R1007 1SAM250000R1008 1SAM250000R1009 1SAM250000R1010 1SAM250000R1012 1SAM250000R1011 1SAM250000R1013 1SAM250000R1014 1SAM250000R1015 1SAM250005R1001 1SAM250005R1002 1SAM250005R1003 1SAM250005R1004 1SAM250005R1005 1SAM250005R1006 1SAM250005R1007 1SAM250005R1008 1SAM250005R1009 1SAM250005R1010 1SAM250005R1012 1SAM250005R1011 1SAM250005R1013 1SAM250005R1014 1SAM250005R1015 35 1.38" 70 0.22" 45 1.77" 2/4 | ABB MS116-0.16 MS116-0.25 MS116-0.4 MS116-0.63 MS116-1.0 MS116-1.6 MS116-2.5 MS116-4.0 MS116-6.3 MS116-10 MS116-12 MS116-16 MS116-20 MS116-25 MS116-32 MS116-0.16-HKF1-11 MS116-0.25-HKF1-11 MS116-0.4-HKF1-11 MS116-0.63-HKF1-11 MS116-1.0-HKF1-11 MS116-1.6-HKF1-11 MS116-2.5-HKF1-11 MS116-4.0-HKF1-11 MS116-6.3-HKF1-11 MS116-10.0-HKF1-11 MS116-12.0-HKF1-11 MS116-16.0-HKF1-11 MS116-20-HKF1-11 MS116-25-HKF1-11 MS116-32-HKF1-11 75 80.1 14 0.55" Weight (1 pce) mm, inches 1.5 0.06" 5.5 Order code 3.85" Main dimensions Type 97.8 MS116-32-HKF1-11 Short-circuit breaking capacity ICS at 400 V AC 2CDC242002F0010 2CDC241012F0011 MS116-0.16-HKF1-11 Setting range 2.3" 2CDC241013F0011 MS116-25 Rated operational power 400 V AC-3 kW 0.03 0.06 0.09 0.12 0.25 0.55 0.75 1.5 2.2 4.0 5.5 7.5 9.0 12.5 15.5 0.03 0.06 0.09 0.12 0.25 0.55 0.75 1.5 2.2 4.0 5.5 7.5 9.0 12.5 15.5 57.8 2CDC241001F0011 Ordering details MS132 manual motor starters 0.10 to 32 A – with thermal and electromagnetic protection 1SBC101232F0010 Description MS132-10 Manual motor starters (MMS) are protection devices for the main circuit. They combine motor control and protection in a single device. MMS are used mainly to switch motors manually ON/OFF and protect them and the installation fuse-less against short-circuit, overload and phase failures. Fuse-less protection with a manual motor starter saves costs, space and ensures a quick reaction under short-circuit condition, by switching off the motor within milliseconds. MS132 is a compact and powerful range for motor protection up 15.5 kW (400 V) / 32 A in width of 45 mm. This type has also a clear and reliable indication of fault in a separate window in the event of short-circuit tripping. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, three-phase bus bars, power in-feed blocks. 2 Short-circuit breaking capacity ICS at 400 V AC Rated instantaneous shortcircuit current setting li A 0.10 … 0.16 0.16 … 0.25 0.25 … 0.40 0.40 … 0.63 0.63 … 1.00 1.00 … 1.60 1.60 … 2.50 2.50 … 4.00 4.00 … 6.30 6.30 … 10.0 8.00 … 12.0 10.0 … 16.0 16.0 … 20.0 20.0 … 25.0 25.0 … 32.0 0.10 ... 0.16 0.16 ... 0.25 0.25 ... 0.40 0.40 ... 0.63 0.63 ... 1.00 1.00 ... 1.60 1.60 ... 2.50 2.50 ... 4.00 4.00 ... 6.30 6.30 ... 10.0 8.00 ... 12.0 10.0 ... 16.0 16.0 ... 20.0 20.0 ... 25.0 25.0 ... 32.0 kA 100 100 100 100 100 100 100 100 100 100 100 100 100 50 25 100 100 100 100 100 100 100 100 100 100 100 100 100 50 25 A 1.56 2.44 3.90 6.14 11.50 18.40 28.75 50.00 78.75 150 180 240 300 375 480 1.56 2.44 3.90 6.14 11.50 18.40 28.75 50.00 78.75 150 180 240 300 375 480 Main dimensions Type Order code Weight (1 pce) MS132-0.16 MS132-0.25 MS132-0.4 MS132-0.63 MS132-1.0 MS132-1.6 MS132-2.5 MS132-4.0 MS132-6.3 MS132-10 MS132-12 MS132-16 MS132-20 MS132-25 MS132-32 MS132-0.16-HKF1-11 MS132-0.25-HKF1-11 MS132-0.4-HKF1-11 MS132-0.63-HKF1-11 MS132-1.0-HKF1-11 MS132-1.6-HKF1-11 MS132-2.5-HKF1-11 MS132-4.0-HKF1-11 MS132-6.3-HKF1-11 MS132-10.0-HKF1-11 MS132-12.0-HKF1-11 MS132-16.0-HKF1-11 MS132-20-HKF1-11 MS132-25-HKF1-11 MS132-32-HKF1-11 1SAM350000R1001 1SAM350000R1002 1SAM350000R1003 1SAM350000R1004 1SAM350000R1005 1SAM350000R1006 1SAM350000R1007 1SAM350000R1008 1SAM350000R1009 1SAM350000R1010 1SAM350000R1012 1SAM350000R1011 1SAM350000R1013 1SAM350000R1014 1SAM350000R1015 1SAM350005R1001 1SAM350005R1002 1SAM350005R1003 1SAM350005R1004 1SAM350005R1005 1SAM350005R1006 1SAM350005R1007 1SAM350005R1008 1SAM350005R1009 1SAM350005R1010 1SAM350005R1012 1SAM350005R1011 1SAM350005R1013 1SAM350005R1014 1SAM350005R1015 kg 0.215 0.215 0.215 0.215 0.215 0.265 0.265 0.265 0.265 0.265 0.310 0.310 0.310 0.310 0.310 0.231 0.231 0.231 0.231 0.231 0.281 0.281 0.281 0.281 0.281 0.326 0.326 0.326 0.326 0.326 mm, inches 81.05 3.19" 72.2 81.25 3.2" 72.4 2.84" 0.22" 45 1.77" 2CDC242016F0009 14 0.55" 45 1.77" 35 1.38" 75 2.95" 1.7 0.1" 97.8 3.85" 14 0.55" MS132 ≥ 12 A ABB | 2/5 2CDC131062C0201 MS132 ≤ 10 A 43.3 1.71" 2CDC242015F0009 14 0.55" 45 1.77" 43.5 5.5 0.22" 1.5 0.06" 2.85" 45" 1.77" 2.95" 14 0.55" 35 1.38" 5.5 0.22" 1.5 0.06" 75 MS132-32-HKF1-11 Setting range 1.7 0.1" 2CDC241015F0011 MS132-0.16-HKF1-11 3.54" 2CDC241014F0011 MS132-32 Rated operational power 400 V AC-3 kW 0.03 0.06 0.09 0.12 0.25 0.55 0.75 1.5 2.2 4.0 5.5 7.5 9.0 12.5 15.5 0.03 0.06 0.09 0.12 0.25 0.55 0.75 1.5 2.2 4.0 5.5 7.5 9.0 12.5 15.5 90 2CDC241001F0011 Ordering details MO132 manual motor starters magnetic only 0.16 to 32 A – with electromagnetic protection Description 2CDC241009F0011 2 2CDC241008F0011 MO132-6.3 MO132-32 Manual motor starters magnetic only are electromechanical protection devices for the main circuit. They are used mainly to switch motors manually ON/OFF and protect them fuse-less against short-circuit. Fuse-less protection with a manual motor starter saves costs, space and ensures a quick reaction under short-circuit condition, by switching off the motor within milliseconds. Fuse-less starter combinations are setup together with contactors and overload relays. Ordering details Rated operational power 400 V AC-31) kW 0.03 0.06 0.09 0.12 0.25 0.55 0.75 1.5 2.2 4.0 5.5 7.5 9.0 12.5 15.5 1) Rated Short-circuit operational breaking current capacity ICS at 400 V AC Rated instantaneous shortcircuit current setting li A 0.16 0.25 0.40 0.63 1.0 1.6 2.5 4.0 6.3 10 12 16 20 25 32 A 1.56 2.44 3.90 6.14 11.50 18.40 28.75 50.00 78.75 125.00 150.00 200.00 250.00 312.50 400.00 kA 100 100 100 100 100 100 100 50 50 50 50 50 50 50 25 Type Order code Weight (1 pce) MO132-0.16 MO132-0.25 MO132-0.4 MO132-0.63 MO132-1.0 MO132-1.6 MO132-2.5 MO132-4.0 MO132-6.3 MO132-10 MO132-12 MO132-16 MO132-20 MO132-25 MO132-32 1SAM360000R1001 1SAM360000R1002 1SAM360000R1003 1SAM360000R1004 1SAM360000R1005 1SAM360000R1006 1SAM360000R1007 1SAM360000R1008 1SAM360000R1009 1SAM360000R1010 1SAM360000R1012 1SAM360000R1011 1SAM360000R1013 1SAM360000R1014 1SAM360000R1015 kg 0.215 0.215 0.215 0.215 0.215 0.265 0.265 0.265 0.265 0.265 0.310 0.310 0.310 0.310 0.310 For overload protection of motors, an appropriate thermal or electronic overload relay must be used Main dimensions mm, inches 81.05 3.19" 72.2 81.25 3.2" 72.4 2/6 | ABB 2.84" 0.22" 14 0.55" 14 0.55" 45 1.77" MO132 ≥ 12 A 45 1.77" 35 1.38" 1.7 0.1" 75 2.95" 45" 1.77" 97.8 3.85" 1.71" 2CDC131062C0201 MO132 ≤ 10 A 43.3 2CDC242006F0011 14 0.55" 45 1.77" 43.5 2CDC242005F0011 75 2.95" 1.7 0.1" 3.54" 90 14 0.55" 35 1.38" 5.5 0.22" 1.5 0.06" 5.5 0.22" 1.5 0.06" 2.85" MS132-T circuit breakers for transformer protection 0.10 to 25 A – with thermal and electromagnetic protection 2CDC241001F0014 Description MS132-10T Circuit breakers for transformer protection are electro mechanical protection devices specially designed to protect control transformers on the primary side. They allow fuse-less protection against overload and shortcircuit, saving space and cost and ensuring a quick reaction under short-circuit condition by switching off the transformer within milliseconds. The short-circuit current setting is fixed to 20 times the operating current to handle the high inrush current generated by transformers. The device allows manual connection and disconnection of the transformer from the mains. MS132-T is a 45 mm (width) compact and powerful range for transformer protection up to 12.5 kW (400 V) / 25 A. This type has also a clear and reliable indication of fault in a seperate window in the event of shortcircuit tripping. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The handle is lockable to protect against unauthorized changes. Furthermore it is possible to use the existing MS116/MS132 manual motor starter accessories like auxiliary contacts, signaling contacts, undervoltage releases, shunt trips and power in-feed blocks. Moreover ABB offers special accessories for fast single phase setup. 2 Ordering details A 0.10 … 0.16 0.16 … 0.25 0.25 … 0.40 0.40 … 0.63 0.63 … 1.00 1.00 … 1.60 1.60 … 2.50 2.50 … 4.00 4.00 … 6.30 6.30 … 10.0 8.00 … 12.0 10.0 … 16.0 16.0 … 20.0 20.0 … 25.0 Rated instantaneous short-circuit current setting li A 3.2 5 8 12.6 20 32 50 80 126 200 240 320 400 500 Type Order code Weight (1 pce) MS132-0.16T MS132-0.25T MS132-0.4T MS132-0.63T MS132-1.0T MS132-1.6T MS132-2.5T MS132-4.0T MS132-6.3T MS132-10T MS132-12T MS132-16T MS132-20T MS132-25T 1SAM340000R1001 1SAM340000R1002 1SAM340000R1003 1SAM340000R1004 1SAM340000R1005 1SAM340000R1006 1SAM340000R1007 1SAM340000R1008 1SAM340000R1009 1SAM340000R1010 1SAM340000R1012 1SAM340000R1011 1SAM340000R1013 1SAM340000R1014 kg 0.215 0.215 0.215 0.215 0.215 0.265 0.265 0.265 0.265 0.265 0.310 0.310 0.310 0.310 Please check for single-phase equipment chapter Main accessories. Main dimensions mm, inches 81.05 3.19" 72.2 81.25 3.2" 72.4 43.3 2.84" 0.22" 14 0.55" 45 1.77" 45 1.77" 2CDC242016F0009 14 0.55" 35 1.38" 75 2.95" 1.7 0.1" 97.8 3.85" 1.71" MS132T ≥ 12 A ABB | 2/7 2CDC131062C0201 MS132T ≤ 10 A 5.5 0.22" 1.5 0.06" 2CDC242015F0009 14 0.55" 45 1.77" 43.5 2.85" 45" 1.77" 75 2.95" 1.7 0.1" 14 0.55" 35 1.38" 5.5 0.22" 1.5 0.06" 3.54" MS132-25T Short-circuit breaking capacity ICS at 400 V AC kA 100 100 100 100 100 100 100 100 100 100 100 100 100 50 90 2CDC241002F0014 Setting range MS116, MS132, MO132, MS132-T Technical data Main circuit – Utilization characteristics according to IEC/EN MS116 MS132 MO132 IEC/EN 60947–2, IEC/EN 60947-4-1, IEC/EN 60947-1 690 V AC 690 V AC / 250 V DC 690 V AC 50/60 Hz DC, 50/60 Hz 50/60 Hz 10A 10 (10A for 1SAM350000R1001) 3 100 % 100000 cycles up to 16 A 100000 cycles 20 ... 32 A 50000 cycles 6 kV 690 V See ordering details See "Rated operational current Ie" See ordering details See table "Short-circuit breaking capacity and back-up fuses" See table "Short-circuit breaking capacity and back-up fuses" 10 kA - Number of poles Duty time Mechanical durability Electrical durability Rated impulse withstand voltage Uimp Rated insulation voltage Ui Rated operational current Ie Rated operational current DC-5 Ie 3 conducting paths in series up to 250 V Rated instantaneous short-circuit current setting Ii Rated service short-circuit breaking capacity Ics Rated ultimate short-circuit breaking capacity Icu Rated service short-circuit breaking capacity DC Ics 3 conducting paths in series up to 250 V MS132-T 690 V AC 50/60 Hz 10 - - Short-circuit breaking capacity and back-up fuses lCS Rated service short-circuit breaking capacity lCU Rated ultimate short-circuit breaking capacity ICC Prospective short-circuit current at installation location Note: Maximum rated current of the back-up fuses if ICC > ICS Type MS116-0.16 MS116-0.25 MS116-0.4 MS116-0.63 MS116-1.0 MS116-1.6 MS116-2.5 MS116-4.0 MS116-6.3 MS116-10 MS116-12 MS116-16 MS116-20 MS116-25 MS116-32 230 V AC ICU ICS kA kA gG, aM A 400 V AC ICS ICU kA kA gG, aM A 440 V AC ICS ICU kA kA gG, aM A 500 V AC ICS ICU kA kA gG, aM A 690 V AC ICS ICU kA kA gG, aM A No back-up fuse required up to ICC = 30 kA No back-up fuse required up to ICC = 50 kA 25 16 10 10 10 25 16 15 15 10 80 80 125 125 125 25 16 10 10 10 25 16 15 15 10 80 80 125 125 125 10 6 6 6 6 6 3 3 3 10 6 6 6 6 6 6 6 6 25 25 63 63 63 63 125 125 125 10 6 6 6 6 4 3 3 3 10 6 6 6 6 4 4 4 4 25 25 63 63 63 63 125 125 125 5 2 2 2 2 2 2 2 2 5 2 2 2 2 2 2 2 2 25 25 40 50 50 63 80 100 100 MS116-10: No need for back-up fuse in networks with a prospective current of up to 50 kA at 400 V. MS116-16: No need for back-up fuse in networks with a prospective current of up to 16 kA at 400 V. With an approbiate 80 A type gG fuse the device can be used in a network with a prospective current of up to 100 kA. MS116-32: No need for back-up fuse in networks with a prospective current of up to 10 kA at 400 V. 2CDC131062C0201 2 Type Standards Rated operational voltage Ue Rated frequency Trip class 2/8 | ABB MS116, MS132, MO132, MS132-T Technical data Type MS132-0.16 MS132-0.25 MS132-0.4 MS132-0.63 MS132-1.0 MS132-1.6 MS132-2.5 MS132-4.0 MS132-6.3 MS132-10 MS132-12 MS132-16 MS132-20 MS132-25 MS132-32 230 V AC ICS ICU kA kA gG, aM A 400 V AC ICS ICU kA kA gG, aM A 440 V AC ICS ICU kA kA gG, aM A 500 V AC ICS ICU kA kA gG, aM A 690 V AC ICS ICU kA kA gG, aM A 2 No back-up fuse required up to ICC = 100 kA 50 25 50 50 125 125 50 25 50 50 125 125 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 35 63 100 100 125 125 125 125 20 20 20 20 20 20 10 10 20 20 20 20 20 20 10 10 35 63 100 100 125 125 125 125 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 32 50 50 63 63 80 100 100 MS132-16: No need for back-up fuse in networks with a prospective current of up to 100 kA at 400 V. MS132-32: No need for back-up fuse in networks with a prospective current of up to 50 kA at 400 V. With an approbiate 125 A type gG fuse the device can be used in a network with a prospective current of up to 100 kA. Type MO132-0.16 MO132-0.25 MO132-0.4 MO132-0.63 MO132-1.0 MO132-1.6 MO132-2.5 MO132-4.0 MO132-6.3 MO132-10 MO132-12 MO132-16 MO132-20 MO132-25 MO132-32 230 V AC ICS ICU kA kA gG, aM A 400 V AC ICS ICU kA kA gG, aM A 440 V AC ICS ICU kA kA gG, aM A 500 V AC ICS ICU kA kA gG, aM A 690 V AC ICS ICU kA kA gG, aM A 125 125 20 20 20 20 20 20 10 10 35 63 100 100 125 125 125 125 20 20 20 20 20 20 10 10 35 63 100 100 125 125 125 125 3 3 3 3 3 3 3 3 32 50 50 63 63 80 100 100 No back-up fuse required up to ICC = 100 kA 50 25 50 50 125 125 50 25 50 50 20 20 20 20 20 20 10 10 20 20 20 20 20 20 10 10 3 3 3 3 3 3 3 3 MO132-20: No need for back-up fuse in networks with a prospective current of up to 100 kA at 400 V. MO132-32: No need for back-up fuse in networks with a prospective current of up to 50 kA at 400 V. With an approbiate 125 A type gG fuse the device can be used in a network with a prospective current of up to 100 kA. MS132-0.16T MS132-0.25T MS132-0.4T MS132-0.63T MS132-1.0T MS132-1.6T MS132-2.5T MS132-4.0T MS132-6.3T MS132-10T MS132-12T MS132-16T MS132-20T MS132-25T 230 V AC ICS ICU kA kA gG, aM A 400 V AC ICS ICU kA kA gG, aM A 440 V AC ICS ICU kA kA gG, aM A 500 V AC ICS ICU kA kA gG, aM A 690 V AC ICS ICU kA kA gG, aM A 125 30 30 30 30 30 30 30 35 63 100 100 125 125 125 20 20 20 20 20 20 10 35 63 100 100 125 125 125 3 3 3 3 3 3 3 32 50 50 63 63 80 100 No back-up fuse required up to ICC = 100 kA 50 50 125 50 50 30 30 30 30 30 30 30 20 20 20 20 20 20 10 3 3 3 3 3 3 3 ABB | 2/9 2CDC131062C0201 Type MS116, MS132, MO132, MS132-T Technical data Main circuit – Utilization characteristics according to UL/CSA MS116 MS132 UL 60947-1, UL60947-4-1 600 V AC See table "UL – Manual motor controller" 125 % FLA See table "Motor rating, three phase" See table "Motor rating, three phase" See table "Motor rating, three phase" MO132 MS132-T - MS116 x - MO132 x - MS132-T - UL/CSA functions Type Manual motor controller Manual self-protected combination motor controller Self-protected combination motor controller Tap conductor protector MS132 x x with AF contactor x UL – Manual motor controller Type MS116-0.16 MS116-0.25 MS116-0.4 MS116-0.63 MS116-1.0 MS116-1.6 MS116-2.5 MS116-4.0 MS116-6.3 MS116-10 MS116-12 MS116-16 MS116-20 MS116-25 MS116-32 1) Maximum fuse type K5 o. RK5 Maximum short-circuit current per UL/NEC for motor disconnect1) 480 V / 600 V 480 V A kA 100 30 100 30 100 30 100 30 100 30 100 30 100 30 100 18 100 18 100 18 100 18 100 18 100 18 100 18 100 18 600 V kA 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 for group installation 480 V kA 30 30 30 30 30 30 30 18 18 18 18 18 18 18 18 600 V kA 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Suitable as motor disconnect only when provided with padlock SA1 or SA3... 2CDC131062C0201 2 Type Standards Maximum operational voltage Manual motor controller ratings Trip rating Motor ratings Horse power Full load amps (FLA) Locked rotor amps (LRA) 2/10 | ABB MS116, MS132, MO132, MS132-T Technical data Maximum short-circuit current for motor disconnect for group installation kA kA kA kA for self-protected combination motor controller (type E) in combination with feeder block S1-M3-xx 480Y / 277 600Y / 347 V V kA kA 65 65 65 65 65 65 65 65 65 65 30 30 30 30 30 47 47 47 47 47 47 47 18 18 18 18 18 18 18 18 65 65 65 65 65 65 65 65 65 65 30 30 30 30 30 47 47 47 47 47 47 47 30 30 30 30 30 30 30 30 65 65 65 65 65 65 65 65 65 65 30 30 30 30 30 480 V MS132-0.16 MS132-0.25 MS132-0.4 MS132-0.63 MS132-1.0 MS132-1.6 MS132-2.5 MS132-4.0 MS132-6.3 MS132-10 MS132-12 MS132-16 MS132-20 MS132-25 MS132-32 Type MO132-0.16 MO132-0.25 MO132-0.4 MO132-0.63 MO132-1.0 MO132-1.6 MO132-2.5 MO132-4.0 MO132-6.3 MO132-10 MO132-12 MO132-16 MO132-20 MO132-25 MO132-32 600 V 480 V 600 V Circuit breaker or class R fuse per UL/NEC 480 V / 600 V with minimum interrupting rating of 35,000 rms symmetrical amperes 47 47 47 47 47 47 47 47 18 18 - for self-protected combination motor controller (type F) for tap conductor protection 480Y / 277 V kA 600Y / 347 V Minimum contactor kA size 480 V kA kA 65 65 65 65 65 65 65 65 65 65 30 30 30 30 30 47 47 47 47 47 47 47 47 47 47 - 65 65 65 65 65 65 65 65 65 65 30 30 30 30 30 47 47 47 47 47 47 47 47 18 18 18 18 18 18 18 AF26...AF38 AF26...AF38 AF26...AF38 AF26...AF38 AF26...AF38 AF26...AF38 AF26...AF38 AF26...AF38 AF26...AF38 AF26...AF38 AF26...AF38 AF26...AF38 AF26...AF38 AF26...AF38 AF26... AF38, AF40 2 600 V Maximum short-circuit current rating 480 V kA 600 V kA 30 18 30 30 30 30 18 18 18 18 30 30 30 30 30 30 30 30 30 30 18 18 18 18 18 18 18 18 18 18 2CDC131062C0201 Type ABB | 2/11 MS116, MS132, MO132, MS132-T Technical data General technical data MS116 3 Yes Yes MS132 3 Yes Yes MO132 3 No Yes MS132-T 3 Yes Yes -25 ... +55 °C -25 ... +70 °C 0 ... +40 °C -50 ... +80 °C Acc. to IEC/EN60947-4-1 2000 m 25g / 11 ms 5g / 3 ... 150 Hz -25 ... +60 °C -25 ... +70 °C 0 ... +40 °C -50 ... +80 °C Acc. to IEC/EN60947-4-1 2000 m 25g / 11 ms 5g / 3 ... 150 Hz -25 ... +60 °C -50 ... +80 °C 2000 m 25g / 11 ms 5g / 3 ... 150 Hz -25 ... +60 °C -25 ... +70 °C 0 ... +40 °C -50 ... +80 °C Acc. to IEC/EN60947-4-1 2000 m 25g / 11 ms 5g / 3 ... 150 Hz Mounting position Position 1-6 (optional for single mounting) DIN-rail (EN 60715) On request 0 mm 150 mm 0 mm > 1.5 mm 75 mm IP20 IP20 Position 1-6 (optional for single mounting) DIN-rail (EN 60715) On request 0 mm 150 mm 0 mm > 1.5 mm 75 mm IP20 IP20 Position 1-6 (optional for single mounting) DIN-rail (EN 60715) On request 0 mm 150 mm 0 mm > 1.5 mm 75 mm IP20 IP20 Position 1-6 (optional for single mounting) DIN-rail (EN 60715) 0 mm 150 mm 0 mm > 1.5 mm 75 mm IP20 IP20 Mounting Group mounting Minimum distance to other units same type Minimum distance to electrical conductive board Degree of protection Horizontal Vertical Horizontal, up to 400 V Horizontal, up to 690 V Vertical Housing Main circuit terminals 2CDC131062C0201 2 Type Pollution degree Phase loss sensitivity Disconnect function acc. to IEC/EN 60947-2 Ambient air temperature Operation Open - compensated Open Enclosed (IB132) Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 2/12 | ABB MS116, MS132, MO132, MS132-T Technical data Connecting characteristics Main circuit Type Connecting capacity Rigid 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x MS116 ≤ 16 A MS116 ≥ 20 A 1 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² AWG 16-12 AWG 16-12 9 mm 0.8 ... 1.2 Nm / 10 … 12 Ib.in M3.5 (Pozidriv 2 / 5.5 mm) 2.5 ... 6 mm² 1 ... 6 mm² 1 ... 6 mm² 1 ... 6 mm² AWG 12-8 AWG 12-8 10 mm 2.0 Nm / 18 Ib.in M4 (Pozidriv 2 / 6.5 mm) MS132-0.16 … MS132-10 MS132-12 … MS132-32 1 or 2 x 1 ... 4 mm² Flexible with ferrule Flexible with insulated ferrule Flexible 1 or 2 x 0.75 ... 2.5 mm² 1 or 2 x 0.75 ... 2.5 mm² 1 or 2 x 0.75 ... 2.5 mm² Stranded acc. to UL/CSA Flexible acc. to UL/CSA 1 or 2 x AWG 16-12 1 or 2 x AWG 16-12 9 mm 0.8 ... 1.2 Nm / 10 … 12 Ib.in M3.5 (Pozidriv 2) Stripping length Tightening torque Recommended screw driver Main circuit Type Connecting capacity Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stripping length Tightening torque Recommended screw driver MS132-T ≤ 10 A 1 or 2 x 1 ... 4 mm² 1 or 2 x 0.75 ... 2.5 mm² 1 or 2 x 0.75 ... 2.5 mm² 1 or 2 x 0.75 ... 2.5 mm² 9 mm 0.8 ... 1.2 Nm / 10 … 12 Ib.in M3.5 (Pozidriv 2 / 5.5 mm) 2 1 ... 2.5 mm² 2.5 ... 6 mm² 0.75 ... 6 mm² 0.75 ... 6 mm² 1 ... 2.5 mm² 2.5 ... 6 mm² AWG 16-8 AWG 16-8 10 mm 2.0 Nm / 18 Ib.in M4 (Pozidriv 2) MS132-T ≥ 12 A 1/2 x 1 ... 2.5 mm² 1/2 x 2.5 ... 6 mm² 1/2 x 0.75 ... 6 mm² 1/2 x 0.75 ... 6 mm² 1/2 x 1 ... 2.5 mm² 1/2 x 2.5 ... 6 mm² 10 mm 2.0 Nm / 18 Ib.in M4 (Pozidriv 2 / 6.5 mm) 2CDC131062C0201 Main circuit Type Connecting capacity Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Stripping length Tightening torque Recommended screw driver ABB | 2/13 MS116, MS132, MO132, MS132-T Main accessories Manual motor starter with accessories (MS116, MO132) HK1 2 SK1 HK1 MS116 MO132 HK1 AA1 2CDC246001F0013 HKF1 UA1 Manual motor starter with accessories (MS132) and circuit breaker for transformer protection (MS132-T) HK1 SK1 HK1 HK1 MS132 MS132-T SK1 HK1 CK1 CK1 AA1 2/14 | ABB 2CDC131050C0201 UA1 1SBC500311F0000 HKF1 1SBC101208F0014 MS116, MS132, MO132, MS132-T Main accessories HKF1-11 Description MMS and MS132-T can be equipped with auxiliary contacts for lateral/front mounting, signaling contact for lateral mounting, undervoltage release and shunt trips. Two different signaling contacts are available. The accessories can be fitted wiring free and without tools. A variety of combinations is possible as required for the application. The auxiliary contacts change position with the main contacts. The signaling contact SK signals tripping regardless if it was caused by short-circuit or overload. The signaling contact CK signals tripping in case it was caused by short-circuit. Undervoltage release are used for remote tripping of the manual motor starter especially for emergency stop circuits. Shunt trips release the MMS used for remote tripping. 2 Ordering details 1SBC101209F0014 Suitable for HK1-11 Auxiliary Auxiliary Description contacts contacts N.O. N.C. Type Auxiliary contacts – mountable on the front MS116, MS132, 1 1 MO132, 2 0 MS132-T 1SBC101210F0014 Auxiliary contacts – mountable on the right MS116, MS132, 1 1 max. 2 pieces MO132, 2 0 max. 2 pieces MS132-T 0 2 max. 2 pieces 2 0 with lead contacts 1SBC101286F0014 SK1-11 Signaling contacts – mountable on the right MS116, MS132, 1 1 for tripped alarm, MO132, max. 2 pieces MS132-T 2 0 for tripped alarm, max. 2 pieces 0 2 for tripped alarm, max. 2 pieces MS132, 1 1 for short-circuit alarm, MS132-T max. 2 pieces 2 0 for short-circuit alarm, max. 2 pieces 0 2 for short-circuit alarm, max. 2 pieces Order code Pkg qty Weight (1 pce) pce kg HKF1-11 HKF1-20 1SAM201901R1001 1SAM201901R1002 10 10 0.015 0.015 HK1-11 HK1-20 HK1-02 HK1-20L 1SAM201902R1001 1SAM201902R1002 1SAM201902R1003 1SAM201902R1004 2 2 2 2 0.035 0.035 0.035 0.035 SK1-11 1SAM201903R1001 2 0.035 SK1-20 1SAM201903R1002 2 0.035 SK1-02 1SAM201903R1003 2 0.035 CK1-11 1SAM301901R1001 2 0.035 CK1-20 1SAM301901R1002 2 0.035 CK1-02 1SAM301901R1003 2 0.035 CK1-11 27.8 1.09" 42.3 1.67" 68.8 2.71" 72 2.83" 3.54" 2CDC131050C0201 5.5 0.22" 2CDC242001F0012 9 0.35" 90 45 1.77" mm, inches 42.1 1.66" Main dimensions HK1 ABB | 2/15 MS116, MS132, MO132, MS132-T Main accessories Ordering details Suitable for Rated control supply voltage 50 Hz V AC 1SBC101211F0014 2 1SBC101212F0014 AA1-24 Type Order code 60 Hz V AC Shunt trips – mountable on the left MS116, MS132, 20 ... 24 MO132, MS132-T 110 200 ... 240 350 ... 415 20 ... 24 110 200 ... 240 350 ... 415 Undervoltage releases – mountable on the left MS116, MS132, 20 24 MO132, MS132-T 24 48 60 110 120 208 230 240 400 415 480 575 Pkg qty Weight (1 pce) pce kg AA1-24 AA1-110 AA1-230 AA1-400 1SAM201910R1001 1SAM201910R1002 1SAM201910R1003 1SAM201910R1004 1 1 1 1 0.100 0.100 0.100 0.100 UA1-20 UA1-24 UA1-48 UA1-60 UA1-110 UA1-208 UA1-230 UA1-400 UA1-415 UA1-575 1SAM201904R1010 1SAM201904R1001 1SAM201904R1002 1SAM201904R1003 1SAM201904R1004 1SAM201904R1008 1SAM201904R1005 1SAM201904R1006 1SAM201904R1007 1SAM201904R1009 1 1 1 1 1 1 1 1 1 1 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 UA1-24 AA1, UA1 2/16 | ABB 5.5 0.22" 18 0.71" 2CDC131050C0201 43.5 1.71" 70 2.76" 2CDC242002F0012 1.77" 45 mm, inches 37 1.46" 3.54" 90 Main dimensions MS116, MS132, MO132, MS132-T Main accessories General technical data Type Standards Rated operational voltage Ue Conventional free-air thermal current Ith Rated frequency Rated impulse withstand voltage Uimp Rated insulation voltage Ui Pollution degree Ambient air temperature HK1 SK1 IEC/EN 60947-2, IEC/EN 60947-4-1, IEC/EN 60947-1 690 V AC / 600 DC 6A 50/60 Hz 6 kV 690 V AC 3 -25 ... +70 °C -50 ... +80 °C 25g / 11 ms 5g / 3 ... 150 Hz Operation Storage Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 HKF1 250 V AC / 250 V DC 5A 2 250 V AC Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 24 V, 120 V 6A 3A 240 V 4A 1.5 A 400 V 3A - 440 V, 690 V 1A - 24 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 2A 1A 125 V 0.55 A 0.27 A 250 V 0.27 A 0.11 A 440 V, 600 V 0.15 A - 17 V / 5 mA Minimum switching capacity Short-circuit protective device N.C., 95-96 10 A Type gG N.O., 97-98 10 A Type gG Duty time 100 % Mounting Right side of MMS / MS132-T Mounting positions 1-6 Mechanical durability 50000 cycles - Electrical durability 50000 cycles - Front of MMS / MS132-T Connecting characteristics HK1 Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Stripping length Tightening torque Recommended screw driver 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 ... 1.5 mm² 0.75 ... 1.5 mm² 0.75 ... 1.5 mm² 0.75 ... 1.5 mm² AWG 16-14 AWG 16-14 8 mm 0.8 ... 1.2 Nm / 7 Ib.in M3 (Pozidriv 2) SK1 HKF1 1 ... 2.5 mm² 2CDC131050C0201 Auxiliary circuit Type Connecting capacity ABB | 2/17 MS116, MS132, MO132, MS132-T Main accessories General technical data Type Standards Rated control supply voltage 2 Rated frequency Operating voltage Tripping Coil operating voltage Pull-in Power consumption Holding AC DC AC DC Rated impulse withstand voltage Uimp Rated insulation voltage Ui Pollution degree UA1 AA1 IEC/EN 60947-1,IEC/EN 60947-4-1,UL 60947-1,UL 60947-4-1 see ordering details AA1-24: 20-24 V 50/60 Hz; 20-70 V 50/60 Hz KB = 5 s, 20-70 V DC KB = 5 s AA1-100: 110 V 50/60 Hz; 110-200 V 50/60 Hz KB = 5 s, 110-200 V DC KB = 5 s AA1-230: 200-240 V 50/60 Hz, 200-350 V 50/60 Hz KB = 5 s, 200-350 V DC KB = 5 s AA1-400: 350-415 V 50/60 Hz, 350-500 V 50/60 Hz KB = 5 s, 350-500 V DC KB = 5 s see ordering details 50/60 Hz, DC 0.35 … 0.7 x Us 0.7 … 1.1 x Us 0.85 … 1.1 x Us on request on request on request on request on request on request 6 kV 6 kV 690 V 690 V 3 3 Operation -25 …. +60 °C -25 …. +60 °C Storage -50 …+80 °C -50 …+80 °C Resistance to shock acc. to IEC 60068-2-27 25g / 11 ms 25g / 11 ms Resistance to vibrations acc. to IEC 60068-2-6 5g / 3 ... 150 Hz 5g / 3 ... 150 Hz Mounting left side of MMS / MS132-T left side of MMS / MS132-T Mounting positions - - UA1 AA1 Ambient air temperature Connecting characteristics Auxiliary circuit Type Connecting capacity Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA 1 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 1.5 mm² 0.75 ... 2.5 mm² AWG 16-12 AWG 16-12 10 mm 0.8 ... 1.2 Nm / 7 Ib.in M3 (Pozidriv 2) 2CDC131050C0201 Stripping length Tightening torque Recommended screw driver 1 or 2 x 1 or 2 x 1x 2x 1 or 2 x 1 or 2 x 1 or 2 x 2/18 | ABB MS116, MS132, MO132 Main accessories Manual motor starter with three-phase busbar systems S1-M2-25 S1-M3-35 PS1-..-65 PS1-..-100 2 S1-M1-25 BS1-3 Three-phase busbar up to 100 A 2CDC131050C0201 Three-phase busbar up to 65 A 2CDC242021F0013 SA1 2CDC242020F0013 PS1-..-65 ABB | 2/19 MS116, MS132, MO132, MS132-T Main accessories Description 2CDC241017F0010 Three-phase busbars ensure a quick and safe connection and are therefore a cost effective solution. A variety of different three-phase busbars up to 100 A are in the assortment. Between 2 and 5 manual motor starters with none, one or two lateral auxiliary contacts can be connected. Different three-phase feeder terminals are available according to the application. Phase connecting links and phase power infeed blocks are also available for single-phase applications. 2 2CDC241014F0010 1SBC101226F0014 PS1-3-1-100 1SBC101266F0014 S1-M1-25 2CDC241023F0013 S1-M2-25 Suitable for Three-phase busbars MS116, 65 MS132, 65 MO132 65 65 65 65 65 65 65 65 65 65 MS116, 100 MS132, 100 MO132 100 100 100 100 100 Suitable for SA2 SK0108B91 Rated operational current A Rated operational current A Number of MMS 2 3 4 5 2 3 4 5 2 3 4 5 3 4 5 3 4 5 3 2CDC241004F0014 2CDC241005S0014 2/20 | ABB Order code 35 Flat High UL type E and IEC UL type E and IEC Pkg qty Weight (1 pce) pce kg PS1-2-0-65 PS1-3-0-65 PS1-4-0-65 PS1-5-0-65 PS1-2-1-65 PS1-3-1-65 PS1-4-1-65 PS1-5-1-65 PS1-2-2-65 PS1-3-2-65 PS1-4-2-65 PS1-5-2-65 PS1-3-0-100 PS1-4-0-100 PS1-5-0-100 PS1-3-1-100 PS1-4-1-100 PS1-5-1-100 PS1-3-2-100 1SAM201906R1102 1SAM201906R1103 1SAM201906R1104 1SAM201906R1105 1SAM201906R1112 1SAM201906R1113 1SAM201906R1114 1SAM201906R1115 1SAM201906R1122 1SAM201906R1123 1SAM201906R1124 1SAM201906R1125 1SAM201916R1103 1SAM201916R1104 1SAM201916R1105 1SAM201916R1113 1SAM201916R1114 1SAM201916R1115 1SAM201916R1123 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.034 0.055 0.077 0.098 0.036 0.060 0.087 0.108 0.040 0.067 0.095 0.122 0.084 0.117 0.154 0.094 0.134 0.172 0.105 Type Order code Pkg qty Weight (1 pce) pce kg S1-M1-25 S1-M2-25 S1-M3-25 1SAM201907R1101 1SAM201907R1102 1SAM201907R1103 10 10 10 0.038 0.051 0.042 S1-M3-35 1SAM201913R1103 10 0.060 Weight (1 pce) kg 0.003 0.020 0.020 0.003 0.050 0.009 0.013 Suitable for Description Type Order code MS116, MS132, MO132 MS116, MS132, MO132, MS132-T Protection cover for busbars Screw fixing kit Padlock + two keys Lock handle Lock handle box SA1/SA2 BS1-3 FS116 SA2 SA1 SA3 1SAM201908R1001 1SAM201909R1001 GJF1101903R0002 GJF1101903R0001 GJF1101903R0003 Pkg qty pce 50 1 10 10 10 PB1-1-32 S1-PB1-25 1SAM201914R1001 1SAM201914R1002 1 1 MS116 S1-PB1-25 Type mm² SA1 PB1-1-32 0 0 0 0 1 1 1 1 2 2 2 2 0 0 0 1 1 1 2 Rated cross Mounting section form Three-phase feeder terminals MS116, 65 25 MS132, 65 25 MO132 65 25 100 Number of lateral aux. Accessories for single-phase connection MS116, MS132, MO132, Phase connecting link MS132-T Phase power infeed block 2CDC131050C0201 Ordering details PS1-2-0-65 MS116, MS132, MO132 Main accessories General technical data Type Standards Rated operational voltage Ue Rated operational current Ie Rated frequency Rated impulse withstand voltage Uimp Rated insulation voltage Ui Pollution degree Cross-section Ambient air temperature Operation Storage Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 PS1-xxx-65 PS1-xxx-100 IEC/EN 60947-4-1, IEC/EN 60947-1 690 V 65 A 100 A 50/60 Hz 6 kV 690 V AC 3 10 mm² 16 mm² -25 ... +70 °C -50 ... +80 °C 25g / 11 ms 5g / 3 ... 150 Hz S1-Mx-25 S1-Mx-35 65 A 100 A 25 mm² 35 mm² S1-Mx-25 S1-Mx-35 6 ... 25 mm² 6 ... 16 mm² 6 ... 16 mm² 6 ... 16 mm² AWG 10-4 AWG 10-6 10 mm 2.5 Nm / 22 Ib.in PZ2 (6 mm) 10 ... 35 mm² 10 ... 35 mm² 10 ... 35 mm² 10 ... 35 mm² AWG 8-2 AWG 8-2 12 mm 4.5 Nm / 40 Ib.in Hexagon SW4 2 Main circuit Type Connecting capacity Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Stripping length Tightening torque Recommended screw driver 1x 1x 1x 1x 1x 1x 2CDC131050C0201 Electrical connection ABB | 2/21 MS116, MS132, MO132 Main accessories Description 2CDC241004F0010 2 IB132 are IP65 enclosures for single MMS installation. Additional mounting of auxiliary and signaling contacts, shunt trips and undervoltage release is possible. The handle is lockable in OFF position. For detailed specification see installation instruction. DMS132 are IP65 door mounting kits for MMS installation in any enclosure. Additional mounting of auxiliary, signaling, shunt trips and undervoltage release is possible. The handle is lockable in OFF position. For detailed specification see installation instruction. Ordering details Suitable for 2CDC241003F0010 IB132-Y 2CDC241002F0010 IB132-G Description Color Type Order code Pkg qty Weight (1 pce) pce kg IP65 enclosures (UL: Type 12) MS116, MS132, Padlockable max. Yellow/red MO132 3 padlocks with Grey/black bail diameter 4 ... 6.5 mm IB132-Y IB132-G 1SAM201911R1011 1SAM201911R1010 1 1 0.370 0.370 IP65 door mounting kits (UL: Type 12) MS116, MS132, Padlockable max. Yellow/red MO132 3 padlocks with Grey/black bail diameter 4 ... 6.5 mm DMS132-Y DMS132-G 1SAM201912R1011 1SAM201912R1010 1 1 0.170 0.170 Indication I-O-T and ON-OFF-T Please check for further equipment chapter General accessories. 2CDC241001F0010 DMS132-Y DMS132-G Main dimensions mm, inches 118 4.65" 119 4.69" 174 6.85" 2CDC242011F0011 0 OFF 194 7.64" 183 7.2" I ON IB132 135.7 5.34" 92 3.62" 24 .94" 116.15 4.57" DMS132 2/22 | ABB 2CDC131050C0201 0 OFF 2CDC242012F0011 121 4.76" I ON MS450, MS495, MS497 manual motor starters 22 to 100 A – with thermal and electromagnetic protection 2CDC241004F0009 Description MS450-40 Manual motor starters (MMS) are protection devices for the main circuit. They combine motor control and protection in a single device. MMS are used mainly to switch motors manually ON/OFF and protect them and the installation fuse-less against short-circuit, overload and phase failures. Fuse-less protection with a manual motor starter saves costs, space and ensures a quick reaction under short-circuit condition, by switching off the motor within milliseconds. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter is suitable for threeand single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, three-phase busbars, power in-feed blocks are available as accessory. 2 Ordering details 1SBC101184F0014 Rated Setting operational range power 400 V AC-3 kW A 2CDC241020F0011 MS495-40 Short-circuit breaking capacity ICS at 400 V AC Rated instantaneous shortcircuit current setting li kA A Type Order code Weight (1 pce) kg MS450 manual motor starters 18.5 28.0 … 40.0 25 22 36.0 … 45.0 25 22 40.0 … 50.0 25 520.00 585.00 650.00 MS450-40 MS450-45 MS450-50 1SAM450000R1005 1SAM450000R1006 1SAM450000R1007 1.047 1.039 1.027 MS495 manual motor starters 30 45.0 … 63.0 25 37 57.0 … 75.0 25 45 70.0 … 90.0 25 55 80.0 … 100.0 25 819.00 975.00 1170.00 1235.00 MS495-63 MS495-75 MS495-90 MS495-100 1SAM550000R1007 1SAM550000R1008 1SAM550000R1009 1SAM550000R1010 2.247 2.253 2.280 2.295 MS497 manual motor starters 15 22.0 … 32.0 50 18.5 28.0 … 40.0 50 22 36.0 … 50.0 50 30 45.0 … 63.0 50 37 57.0 … 75.0 50 45 70.0 … 90.0 50 55 80.0 … 100.0 50 416.00 520.00 650.00 819.00 975.00 1170.00 1235.00 MS497-32 MS497-40 MS497-50 MS497-63 MS497-75 MS497-90 MS497-100 1SAM580000R1004 1SAM580000R1005 1SAM580000R1006 1SAM580000R1007 1SAM580000R1008 1SAM580000R1009 1SAM580000R1010 2.222 2.203 2.230 2.255 2.266 2.268 2.275 MS497-100 MS450 1.18" 55 2.17" 12 8 5 23 0.47" 0.20" 0.32" 109 4.29" 127 5.0" 132 5.2" 144 5.67" 0.91" 8 0.31" 30 1.18" 70 2.56" 5 0.20" 7 0.28" 132 5.20" 153 6.02" 169 6.65" 2CDC242014F0011 45 1.77" 30 0.79" MS495, MS497 ABB | 2/23 2CDC131042C0201 20 165 6.50" 155 6.10" 0.39" 2CDC242013F0011 10 mm, inches 85 3.35" 130 5.12" 140 5.51" 0.67" 125 4.92" 17 45 1.77" 116 4.57" 150 5.91" Main dimensions MS450, MS495, MS497 manual motor starters Technical data Main circuit – Utilization characteristics according to IEC/EN MS450, MS495, MS497 IEC/EN 60947–2, IEC/EN 60947-4-1, IEC/EN 60947-1 690 V AC / 450 V DC 50/60 Hz 10 3 100 % 50000 cycles 25000 cycles 6 kV 690 V AC See ordering details See ordering details See table "Short-circuit breaking capacity and back-up fuses" See table "Short-circuit breaking capacity and back-up fuses" Short-circuit breaking capacity and back-up fuses lCS Rated service short-circuit breaking capacity lCU Rated ultimate short-circuit breaking capacity ICC Prospective short-circuit current at installation location Note: Maximum rated current of the back-up fuses if ICC > ICS Type 240 V AC ICU ICS kA kA gG, aM A Short-circuit protection MS450 MS450-40 No back-up fuse required up to MS450-45 ICC = 100 kA MS450-50 MS450: 400 V AC ICS ICU kA kA gG, aM A 440 V AC ICS ICU kA kA gG, aM A 500 V AC ICS ICU kA kA gG, aM A 690 V AC ICS ICU kA kA gG, aM A 25 25 25 160 160 160 15 15 15 125 125 125 5 5 5 100 100 100 2 2 2 4 4 4 63 63 80 125 125 160 160 160 160 3 3 3 3 3 3 6 6 6 5 5 5 63 80 80 100 125 125 100 160 160 160 160 160 160 7 6 5 4 3 3 3 12 12 10 7.5 6 6 6 63 80 100 100 125 160 160 50 50 50 50 50 50 10 10 10 No need for back-up fuse in networks with a prospective current of up to 50 kA at 400 V. With an approbiate 160 A type gG fuse the device can be used in a network with a prospective current of up to 100 kA. Short-circuit protection MS495 MS495-40 MS495-50 MS495-63 No back-up fuse required up to ICC = 100 kA MS495-75 MS495-90 MS495-100 25 25 25 25 25 25 50 50 50 50 50 50 125 125 160 160 160 160 20 20 20 20 20 20 50 50 50 50 50 50 125 125 160 160 160 160 6 6 6 6 6 6 12 12 12 8 8 8 MS495-40: No need for back-up fuse in networks with a prospective current of up to 50 kA at 400 V. With an approbiate 125 A type gG fuse the device can be used in a network with a prospective current of up to 100 kA. MS495-100: No need for back-up fuse in networks with a prospective current of up to 50 kA at 400 V. With an approbiate 160 A type gG fuse the device can be used in a network with a prospective current of up to 100 kA. Short-circuit protection MS497 MS497-32 MS497-40 MS497-50 No back-up fuse required up to MS497-63 ICC = 100 kA MS497-75 MS497-90 MS497-100 50 50 50 50 50 50 50 100 100 100 100 100 100 100 50 50 No back50 up fuse required 50 up to ICC 50 = 100 kA 50 50 100 100 100 70 70 70 70 No back-up fuse required up to ICC = 100 kA 200 200 200 200 11 9 7.5 7.5 5 5 5 22 18 15 15 10 10 10 MS497-32: No need for back-up fuse in networks with a prospective current of up to 100 kA at 440 V. MS497-90: No need for back-up fuse in networks with a prospective current of up to 70 kA at 440 V. With an approbiate 200 A type gG fuse the device can be used in a network with a prospective current of up to 100 kA. 2/24 | ABB 2CDC131042C0201 2 Type Standards Rated operational voltage Ue Rated frequency Trip class Number of poles Duty time Mechanical durability Electrical durability Rated impulse withstand voltage Uimp Rated insulation voltage Ui Rated operational current Ie Rated instantaneous short-circuit current setting Ii Rated service short-circuit breaking capacity Ics Rated ultimate short-circuit breaking capacity Icu MS450, MS495, MS497 manual motor starters Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Manual motor controller ratings Trip rating Motor ratings Horse power Full load amps (FLA) Locked rotor amps (LRA) MS450, MS495, MS497 UL 508, CSA 22.2 No. 14 600 V AC See table "UL 508 – Manual motor controller" 125 % FLA See table "Motor rating, three phase" See table "Motor rating, three phase" See table "Motor rating, three phase" 2 Motor rating, three phase hp Horse power FLA Full load amps LRA Locked rotor amps Type General purpose rating at max. 600 V AC A Full load amps 200 - 208 V AC 230 V AC 460 V AC 575 V AC FLA hp hp hp hp MS450-40 MS450-45 MS450-50 MS495-63 MS495-75 MS495-90 MS495-100 MS497-32 MS497-40 MS497-50 MS497-63 MS497-75 MS497-90 MS497-100 40 45 50 63 75 90 100 32 40 50 63 75 90 100 40 45 50 63 75 90 100 32 40 50 63 75 90 100 10 15 15 20 25 30 40 10 15 15 20 25 30 30 15 15 20 25 25 30 40 10 15 20 25 25 30 40 30 30 40 50 60 75 75 25 30 40 50 60 75 75 40 40 50 60 75 100 100 30 40 50 60 75 100 100 UL 508 – Manual motor controller Type MS450-40 MS450-45 MS450-50 MS495-63 MS495-75 MS495-90 MS495-100 MS497-32 MS497-40 MS497-50 MS497-63 MS497-75 MS497-90 MS497-100 Circuit breaker Max. circuit or class R fuse breaker or per UL/NEC fuse per UL/ NEC Maximum short-circuit current for motor disconnect for group installation 480/600 V A 150 175 200 250 300 350 400 120 160 200 250 300 350 400 480 V kA 65 65 65 65 65 65 65 65 65 65 65 65 65 65 480/600 V A 350 350 350 500 500 500 500 500 500 500 500 500 500 500 600 V kA 25 25 25 30 30 10 10 30 30 30 30 30 10 10 480 V kA 65 65 65 65 65 65 65 65 65 65 65 65 65 65 600 V kA 25 25 25 30 30 10 10 30 30 30 30 30 10 10 for tap conductor for protection UL 508 480Y/277V kA 65 65 65 65 65 65 65 65 65 65 65 65 - 600Y/347V kA 25 25 25 30 30 30 30 30 30 30 - Type E * Type E 480Y/277V kA 65 65 65 65 65 65 65 65 65 65 65 65 65 65 600Y/347V kA 25 25 25 30 30 30 30 30 30 30 - 2CDC131042C0201 * only with use DX495 ABB | 2/25 MS450, MS495, MS497 manual motor starters Technical data General technical data MS450 3 Yes Yes -20 ... +60 °C -20 ... +70 °C -20 ... +35 °C -50 ... +80 °C Acc. to IEC/EN60947-4-1 2000 m 25g / 11 ms 2g / 5-150 Hz Position 1-6 (optional for single DIN-rail 35 mm (EN 60715) 0 mm 50 mm 10 mm 50 mm IP20 IP00 MS495 MS497 mounting) DIN-rail 15 mm / 75 mm (EN 60715) 0 mm 50 mm 70 mm 110 mm 150 mm 10 mm 30 mm 50 mm 70 mm 110 mm 150 mm - Connecting characteristics Main circuit Type Connecting capacity Rigid Flexible with ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Stripping length Tightening torque Recommended screw driver 1 or 2 x 1x 2x 1x 2x 1x 2x 1x 2x MS450 MS495 MS497 0.75 ... 16 mm² 0.75 ... 35 mm² 0.75 ... 25 mm² 0.75 ... 35 mm² 0.75 ... 25 mm² AWG 18-2 AWG 18-2 AWG 18-2 AWG 18-2 13 mm 3 - 4.5 Nm / 27 … 40 Ib.in Pozidriv 2 2.5 ... 16 mm² 10 ... 70 mm² 10 ... 50 mm² 10 ... 70 mm² 10 ... 50 mm² AWG 10-2/0 AWG 10-1/0 AWG 10-2/0 AWG 10-1/0 17 mm 4 - 6 Nm / 35 - 53 Ib.in Hexagon 4 2.5 ... 16 mm² 10 ... 70 mm² 10 ... 50 mm² 10 ... 70 mm² 10 ... 50 mm² AWG 10-2/0 AWG 10-1/0 AWG 10-2/0 AWG 10-1/0 17 mm 4 - 6 Nm / 35 - 53 Ib.in Hexagon 4 2CDC131042C0201 2 Type Pollution degree Phase loss sensitivity Disconnect function acc. to IEC/EN 60947-2 Ambient air temperature Operation Open - compensated Open Enclosed Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 Mounting position Mounting Minimum distance to other Horizontal units same type Vertical - up to 240 V Vertical - up to 440 V Vertical - up to 500 V Vertical - up to 690 V Vertical Minimum distance to Horizontal electrical conductive board Horizontal - up to 500 V Horizontal - up to 690 V Vertical - up to 240 V Vertical - up to 440 V Vertical - up to 500 V Vertical - up to 690 V Vertical Degree of protection Housing Main circuit terminals 2/26 | ABB MO450, MO495, MO496 manual motor starters magnetic only 32 to 100 A – with electromagnetic protection Description ST02501 The manual motor starter magnetic only is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits. Further features are the build-in disconnect function, trip-free mechanism and a rotary handle with a clear switch position indication. The manual motor starter magnetic only is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signalling contacts, undervoltage releases, shunt trips, three-phase busbars, power in-feed blocks are available as accessory. ST02601 MO450-40 2CDC241021F0011 MO495-75 2 Ordering details Rated operational power 400 V AC-31) kW Rated Short-circuit operational breaking current capacity ICS at 400 V AC Rated instantaneous shortcircuit current setting li A A kA Type Order code Weight (1 pce) kg MO450 manual motor starter magnetic only 18.5 40 25 520.00 22 45 25 585.00 22 50 25 650.00 MO450-40 MO450-45 MO450-50 1SAM460000R1005 1SAM460000R1006 1SAM460000R1007 1.033 1.040 1.019 MO495 manual motor starter magnetic only 30 63 25 37 75 25 45 90 25 55 100 25 819.00 975.00 1170.00 1235.00 MO495-63 MO495-75 MO495-90 MO495-100 1SAM560000R1007 1SAM560000R1008 1SAM560000R1009 1SAM560000R1010 2.244 2.247 2.269 2.292 MO496 manual motor starter magnetic only 15 32 50 18.5 40 50 22 50 50 30 63 50 37 75 50 45 90 50 55 100 50 416.00 520.00 650.00 819.00 975.00 1170.00 1235.00 MO496-32 MO496-40 MO496-50 MO496-63 MO496-75 MO496-90 MO496-100 1SAM590000R1004 1SAM590000R1005 1SAM590000R1006 1SAM590000R1007 1SAM590000R1008 1SAM590000R1009 1SAM590000R1010 2.208 2.218 2.218 2.248 2.278 2.266 2.293 For overload protection of motors, an appropriate thermal or electronic overload relay must be used 1) MO496-100 MO450 1.18" 55 2.17" 12 8 5 23 0.47" 0.20" 0.32" 109 4.29" 127 5.0" 132 5.2" 144 5.67" 0.91" 8 0.31" 30 1.18" 70 2.56" 5 0.20" 7 0.28" 132 5.20" 153 6.02" 169 6.65" 2CDC242016F0011 45 1.77" 30 0.79" MO495, MO496 ABB | 2/27 2CDC131038C0201 20 165 6.50" 155 6.10" 0.39" 2CDC242015F0011 10 mm, inches 85 3.35" 130 5.12" 140 5.51" 0.67" 125 4.92" 17 45 1.77" 116 4.57" 150 5.91" Main dimensions MO450, MO495, MO496 manual motor starters magnetic only Technical data Main circuit – Utilization characteristics according to IEC/EN MO450, MO495, MO496 IEC/EN 60947–2, IEC/EN 60947-4-1, IEC/EN 60947-1 690 V AC / 450 V DC 50/60 Hz 3 100 % 50000 cycles 25000 cycles 6 kV 690 V AC See ordering details See ordering details See table "Short-circuit breaking capacity and back-up fuses" See table "Short-circuit breaking capacity and back-up fuses" Short-circuit breaking capacity and back-up fuses lCS Rated service short-circuit breaking capacity lCU Rated ultimate short-circuit breaking capacity ICC Prospective short-circuit current at installation location Note: Maximum rated current of the back-up fuses if ICC > ICS Type 240 V AC ICU ICS kA kA gG, aM A Short-circuit protection MO450 MO450-40 No back-up fuse required up to MO450-45 ICC = 100 kA MO450-50 MO450: 400 V AC ICS ICU kA kA gG, aM A 440 V AC ICS ICU kA kA gG, aM A 500 V AC ICS ICU kA kA gG, aM A 690 V AC ICS ICU kA kA gG, aM A 25 25 25 160 160 160 15 15 15 125 125 125 5 5 5 100 100 100 2 2 2 4 4 4 63 63 80 160 160 160 160 3 3 3 3 6 5 5 5 80 100 125 125 100 160 160 160 160 160 160 7 6 5 4 3 3 3 12 12 10 7.5 6 6 6 63 80 100 100 125 160 160 50 50 50 50 50 50 10 10 10 No need for back-up fuse in networks with a prospective current of up to 50 kA at 400 V. With an approbiate 160 A type gG fuse the device can be used in a network with a prospective current of up to 100 kA. Short-circuit protection MO495 MO495-63 MO495-75 No back-up fuse required up to ICC = 100 kA MO495-90 MO495-100 25 25 25 25 50 50 50 50 160 160 160 160 20 20 20 20 50 50 50 50 160 160 160 160 6 6 6 6 12 8 8 8 MO495-100: No need for back-up fuse in networks with a prospective current of up to 50 kA at 400 V. With an approbiate 160 A type gG fuse the device can be used in a network with a prospective current of up to 100 kA. Short-circuit protection MO496 MO496-32 MO496-40 MO496-50 No back-up fuse required up to MO496-63 ICC = 100 kA MO496-75 MO496-90 MO496-100 50 50 50 50 50 50 50 100 100 100 100 100 100 100 50 50 No back50 up fuse required 50 up to ICC 50 = 100 kA 50 50 100 100 100 70 70 70 70 No back-up fuse required up to ICC = 100 kA 200 200 200 200 11 9 7.5 7.5 5 5 5 22 18 15 15 10 10 10 MO496-32: No need for back-up fuse in networks with a prospective current of up to 100 kA at 440 V. MO496-90: No need for back-up fuse in networks with a prospective current of up to 70 kA at 440 V. With an approbiate 200 A type gG fuse the device can be used in a network with a prospective current of up to 100 kA. 2CDC131038C0201 2 Type Standards Rated operational voltage Ue Rated frequency Number of poles Duty time Mechanical durability Electrical durability Rated impulse withstand voltage Uimp Rated insulation voltage Ui Rated operational current Ie Rated instantaneous short-circuit current setting Ii Rated service short-circuit breaking capacity Ics Rated ultimate short-circuit breaking capacity Icu 2/28 | ABB MO450, MO495, MO496 manual motor starters magnetic only Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Manual motor controller ratings Trip rating Motor ratings Horse power Full load amps (FLA) Locked rotor amps (LRA) M0450, MO495, MO496 UL 508, CSA 22.2 No. 14 600 V AC See table "UL 508 – Manual motor controller" 125 % FLA See table "Motor rating, three phase" See table "Motor rating, three phase" See table "Motor rating, three phase" 2 Motor rating, three phase hp Horse power FLA Full load amps LRA Locked rotor amps Type General purpose rating at max. 600 V AC A Full load amps 200 - 208 V AC 230 V AC 460 V AC 575 V AC FLA hp hp hp hp MO450-40 MO450-45 MO450-50 MO495-63 MO495-75 MO495-90 MO495-100 MO496-32 MO496-40 MO496-50 MO496-63 MO496-75 MO496-90 MO496-100 40 45 50 63 75 90 100 32 40 50 63 75 90 100 40 45 50 63 75 90 100 32 40 50 63 75 90 100 10 15 15 20 25 30 40 10 15 15 20 25 30 30 15 15 20 25 25 30 40 10 15 20 25 25 30 40 30 30 40 50 60 75 75 25 30 40 50 60 75 75 40 40 50 60 75 100 100 30 40 50 60 75 100 100 for group installation 480 V kA 65 65 65 65 65 65 65 65 65 65 65 65 65 65 600 V kA 25 25 25 30 30 30 10 30 30 30 30 30 10 10 UL 508 – Manual motor controller Type MO450-40 MO450-45 MO450-50 MO495-63 MO495-75 MO495-90 MO495-100 MO496-32 MO496-40 MO496-50 MO496-63 MO496-75 MO496-90 MO496-100 Circuit breaker or class R Max. circuit breaker or fuse per UL/NEC fuse per UL/NEC 480/600 V A 150 175 200 60 250 300 350 120 160 200 250 300 350 400 480/600 V A 500 500 500 500 500 500 500 500 500 500 500 Maximum short-circuit current for motor disconnect 480 V kA 65 65 65 65 65 65 65 65 65 65 65 65 65 65 600 V kA 25 25 25 30 30 30 10 30 30 30 30 30 10 10 2CDC131038C0201 * only with use DX495 ABB | 2/29 MO450, MO495, MO496 manual motor starters magnetic only Technical data General technical data MO450 3 No Yes MO495 MO496 -20 ... +60 °C -20 ... +70 °C (above 60° C, current derating) -20 ... +35 °C -50 ... +80 °C 2000 m 25g / 11 ms 2g / 5-150 Hz Position 1-6 (optional for single mounting) DIN-rail 35 mm (EN 60715) DIN-rail 15 mm / 75 mm (EN 60715) 0 mm 0 mm 50 mm 70 mm 110 mm 150 mm 50 mm 10 mm 10 mm 30 mm 50 mm 70 mm 110 mm 150 mm 50 mm IP20 IP20 Connecting characteristics Main circuit Type Connecting capacity Rigid Flexible with ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Stripping length Tightening torque Recommended screw driver 1 or 2 x 1x 2x 1x 2x 1x 2x 1x 2x MO450 MO495 MO496 0.75 ... 16 mm² 0.75 ... 35 mm² 0.75 ... 25 mm² 0.75 ... 35 mm² 0.75 ... 25 mm² AWG 18-2 AWG 18-2 AWG 18-2 AWG 18-2 13 mm 3 - 4.5 Nm / 27 … 40 Ib.in Pozidriv 2 2.5 ... 16 mm² 10 ... 70 mm² 10 ... 50 mm² 10 ... 70 mm² 10 ... 50 mm² AWG 10-2/0 AWG 10-1/0 AWG 10-2/0 AWG 10-1/0 17 mm 4 - 6 Nm / 35 - 53 Ib.in Hexagon 4 2.5 ... 16 mm² 10 ... 70 mm² 10 ... 50 mm² 10 ... 70 mm² 10 ... 50 mm² AWG 10-2/0 AWG 10-1/0 AWG 10-2/0 AWG 10-1/0 17 mm 4 - 6 Nm / 35 - 53 Ib.in Hexagon 4 2CDC131038C0201 2 Type Pollution degree Phase loss sensitivity Disconnect function acc. to IEC/EN 60947-2 Ambient air temperature Operation Open - compensated Open Enclosed Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 Mounting position Mounting Minimum distance to other Horizontal units same type Vertical - up to 240 V Vertical - up to 440 V Vertical - up to 500 V Vertical - up to 690 V Vertical Minimum distance to Horizontal electrical conductive board Horizontal - up to 500 V Horizontal - up to 690 V Vertical - up to 240 V Vertical - up to 440 V Vertical - up to 500 V Vertical - up to 690 V Vertical Degree of protection Housing Main circuit terminals 2/30 | ABB MS45x, MS49x, MO45x, MO49x manual motor starters Main accessories Manual motor starters MS45x and MS49x with accessories 2CDC242025F0011 2 Manual motor starters MO45x and MO49x with accessories MO45x 2CDC131051C0201 2CDC242025F0011 MO49x ABB | 2/31 MS45x, MS49x, MO45x, MO49x manual motor starters Main accessories 2CDC241026F0011 Description 2 HK4-11 Manual motor starters can be equipped with auxiliary contacts for lateral/front mounting, signalling contact for lateral mounting, undervoltage release and shunt trips. The accessories can be fitted wiring free and without tools. A variety of combinations is possible as required for the application. The auxiliary contacts change position with the main contacts. Undervoltage release are used for remote tripping of the manual motor starter especially for emergency stop circuits. Shunt trips release the MMS used for remote tripping. Ordering details Suitable Auxiliary Auxiliary Description for concontacts tacts N.O. N.C. Type Order code Pkg qty Weight (1 pce) 2CDC241022F0011 kg HKS4-20 Auxiliary contacts – mountable on the front MS45x, 1 1 MS49x, Changeover MO45x, MO49x HK4-11 HK4-W 1SAM401901R1001 1SAM401901R1002 10 10 0.017 0.015 Auxiliary contacts – mountable on the left MS45x, 1 1 Max. 1 piece MS49x, 2 0 Max. 1 piece MO45x, 0 2 Max. 1 piece MO49x HKS4-11 HKS4-20 HKS4-02 1SAM401902R1001 1SAM401902R1002 1SAM401902R1003 2 2 2 0.045 0.045 0.045 SK4-11 1SAM401904R1001 1 0.093 Type Order code Pkg qty Weight (1 pce) 2CDC241024F0011 Signalling contacts – mountable on the left MS45x, 2 2 Separate signalling acc. MS49x, UL508E 1 N.O. + 1 N.C. MO45x, for short circuit alarm and MO49x 1 N.O. + 1 N.C. for tripped alarm, max. 1x SK4-11 + 1 x HKS4-xx SK4-11 Suitable Rated control supply for voltage 2CDC241023F0011 V Hz kg Shunt trip units – mountable on the right MS45x, 20 ... 24 50/60 MS49x, 90 ... 110 50/60 MO45x, 200 ... 240 50/60 MO49x 350 ... 415 50/60 AA4-24 AA4-110 AA4-230 AA4-400 1SAM401907R1001 1SAM401907R1002 1SAM401907R1003 1SAM401907R1004 1 1 1 1 0.135 0.135 0.128 0.125 Undervoltage releases – mountable on the right MS45x, 24 50/60 MS49x, 110/120 50/60 MO45x, 230/240 50/60 MO49x 400/440 50/60 230/240 50/60 400/440 50/60 UA4-24 UA4-110 UA4-230 UA4-400 UA4-HK-230 UA4-HK-400 1SAM401905R1004 1SAM401905R1001 1SAM401905R1002 1SAM401905R1003 1SAM401906R1001 1SAM401906R1002 1 1 1 1 1 1 0.134 0.134 0.131 0.129 0.140 0.137 2CDC241025F0011 AA4-24 Frequency 2CDC131051C0201 UA4-110 2/32 | ABB MS45x, MS49x, MO45x, MO49x manual motor starters Main accessories General technical data Type Standards Rated operational voltage Ue Conventional free-air thermal current Ith Rated frequency Rated impulse withstand voltage Uimp Rated insulation voltage Ui Pollution degree Ambient air temperature Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 HK4-11 HK4-W IEC/EN 60947–1, IEC/EN 60947-5-1, UL 508, 230 V AC / 220 V DC 690 V AC / 220 V DC 2.5 A 5A DC, 50/60 Hz 6 kV 300 V 300 V 3 -20 ... +70 °C -50 ... +80 °C 25g / 11 ms 2g / 5 ... 150 Hz Number of poles 1 N.C. + 1 N.O. Changeover 1 N.C. + 1 N.O. / 2 N.O. / 2 N.C. 2 N.C. + 2 N.O. Operation Storage HKS4 CSA22.2 No. 14 690 V AC 10 A SK4 690 V AC 10 A 690 V 690 V 2 Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 2A 4A 6A 6A 230 V 0.5 A 3A 4A 4A 400 V - 1.5 A 3A 3A 690 V - 0.5 A 1A 1A 24 V 1A 1A 2A 2A 48 V 0.3 A - - - 60 V 24 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category - - - - 0.22 A 0.5 A 0.5 A 230 V - 0.1 A 0.25 A 0.25 A - - Left side of MMS Left side of MMS Minimum switching capacity 17 V / 1 mA Short-circuit protective device 10 A Type gG Duty time 100 % Mounting Front of MMS Mounting positions 1-6 Mechanical durability 100000 cycles Electrical durability 100000 cycles Type Power consumption Pull-in UA4-xxx AA4-xxx 20.2/13 VA/W 20 W 7.2/2.4 VA/W 2.1 W 20.2/13 VA/W 13 … 80 W - 0.35 … 0.7 V x Us 0.85 … 1.1 V x Us 0.7 … 1.1 V x Us - Holding Operating voltage Tripping Coil operating voltage AC DC AC DC Front of MMS 2CDC131051C0201 0.15 A 110 V ABB | 2/33 MS45x, MS49x, MO45x, MO49x manual motor starters Main accessories Connecting characteristics Auxiliary circuit Type Connecting capacity 2 HK4-11 Rigid Flexible with ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA HKS4 SK4 0.5... 2.5 mm² 0.5 ... 1.5 mm² or 0.75 ... 2.5 mm 0.5 ... 2.5 mm² 0.5 ... 1.5 mm² or 0.75 ... 2.5 mm 0.5 ... 2.5 mm² 0.5 ... 1.5 mm² or 0.75 ... 2.5 mm AWG 18-14 AWG 18-14 10 mm 0.8 ... 1.2 Nm / 7 ... 10.3 Ib.in Pozidriv 2 2CDC131051C0201 Stripping length Tightening torque Recommended screw driver 1x 2x 1x 2x 1x 2x 1 or 2 x 1 or 2 x HK4-W 2/34 | ABB MS45x, MS49x, MO45x, MO49x manual motor starters Main accessories 2CDC241003F0012 Description PS4-2-0 Three-phase busbars ensure a quick and safe connection and are therefor a cost effective solution. A variety of different three-phase busbars up to 108 A are in the assortment. Between 2 and 4 manual motor starter with none or two lateral auxiliary contacts can be connected. 2CDC241004F0012 Suitable for 2CDC241005F0012 PS4-3-0 2CDC241023F0013 Rated opera- Number of tional current MMS A Three-phase busbars MS450, 108 A MO450 108 A 108 A 108 A 108 A 108 A Suitable for PS4-4-0 2 Ordering details 2 3 4 2 3 4 Number of lateral aux. Type Order code Pkg qty Weight (1 pce) kg 0 0 0 1 1 1 PS4-2-0 PS4-3-0 PS4-4-0 PS4-2-2 PS4-3-2 PS4-4-2 1SAM401911R1001 1SAM401911R1002 1SAM401911R1003 1SAM401911R1004 1SAM401911R1005 1SAM401911R1006 5 5 5 5 5 5 0.134 0.206 0.280 0.148 0.250 0.362 Type Order code Pkg qty Weight (1 pce) kg S4-M1 1SAM401911R1007 2 0.106 Rated opera- Rated cross Mounting tional current section form A mm² Three-phase feeder terminals MS450, 108 A 25 MO450 Flat SA2 Suitable for Description Type Order code Pkg qty Weight (1 pce) MS450, MO450 Protection cover for busbar Disconnector module Terminal shroud Terminal shroud Terminal shroud Terminal insulation barrier for UL508E Padlock + two keys BS4-3 TB450 KA450 KA495 KA495C 1) DX495 1SAM401911R1008 1SAM401910R1001 1SAM401908R1001 1SAM501901R1001 1SAM501902R1001 1SAM401912R1001 10 1 1 10 10 1 kg 0.001 0.315 0.154 0.018 0.038 0.154 SA2 GJF1101903R0002 10 0.020 MS495, MS497, MO495, MO496 MS450, MS495, MS497, MO450, MO495, MO496 Is plugged onto the housing after removing the box terminals, if using cable lugs. 2CDC131051C0201 1) ABB | 2/35 MS45x, MS49x, MO45x, MO49x manual motor starters Main accessories General technical data PS4-xxx IEC/EN 60947-1 690 V AC 108 A 50/60 Hz 6 kV 690 V AC 3 10 mm² -25 ... +70 °C -50 ... +80 °C Operation Storage S4-M1 25 mm² Connecting characteristics Main circuit Type Connecting capacity S4-M1 Rigid Flexible with ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Tightening torque Recommended screw driver 1x 1x 1x 1x 1x 2.5 ... 50 mm² 4 ... 16 mm² 4 ... 16 mm² AWG 14-4 AWG 14-4 4 Nm Pozidriv 2 Please check for further equipment chapter General accessories. 2CDC131051C0201 2 Type Standards Rated operational voltage Ue Rated operational current Ie Rated frequency Rated impulse withstand voltage Uimp Rated insulation voltage Ui Pollution degree Cross-section Ambient air temperature 2/36 | ABB Notes N19 2 ABB | 2/37 MS116, MS132, MO132, MS4xx, MO4xx General accessories Description 2CDC241003F0011 With this solution of door coupling rotary mechanism it is possible to operate a Manual Motor Starter in the back of a switch cabinet from outside. The door coupling mechanism prevents opening of the door of a switch cabinet with the Manual Motor Starter in ON position. The complete mechanism includes handle, shaft, driver, shaft alignment ring and shaft supporter. All accessories fit for 6 mm shafts with a maximum length of 180 mm. The degree of protection for handles MSHD is IP64. 2 Ordering details Suitable for MSHD-LB Description 2CDC241002S0011 Shafts MS116, For MSHD handles. Shaft MS132, diameter 6 mm. Shaft extension MO132, for door coupling driver. MS4xx, MO4xx IP64 handles (UL: Type 1, 3R, 12) MS116, Padlockable max. 3 padlocks MS132, with bail diameter 5 … 8 mm, MO132, door interlock in ON position MS4xx, defeatable, for use with 6 mm MO4xx OXS6…types up to 180 mm or driver shafts MSOX. 2CDC241004F0011 MSHD-LY Driver MS116, Coupling driver for use with MS132, 6 mm OXS6… types up to MO132, 180 mm. MS4xx, MO4xx 2CDC241001F0012 MSMN Shaft alignment ring MS116, The MSH-AR supports the MS132, long shafts for alignment to the MO132, handle inlet. It makes closing MS4xx, panel doors more easy. Use for MO4xx OXS6X > 105 mm. MSH-AR 2CDC241017V0013 Shaft supporter MS116, With the MSAH it is possible MS132, to support the shaft in the MO132 extension of handle (MSHD). It is mandatory for the usage of shafts >130 mm. Shaft Color length Type Order code Pkg qty mm Weight (1 pce) kg 85 105 130 180 Black Yellow Black Yellow OXS6X85 OXS6X105 OXS6X130 OXS6X180 1SCA101647R1001 1SCA108043R1001 1SCA101655R1001 1SCA101659R1001 1 1 1 1 0.020 0.020 0.030 0.040 MSHD-LB 1) MSHD-LY 1) MSHD-LTB 2) MSHD-LTY 2) 1SAM201920R1001 1SAM201920R1002 1SAM201920R1011 1SAM201920R1012 1 1 1 1 0.065 0.065 0.065 0.065 MSMN 3) MSMNO 4) 1SAM101923R0002 1SAM101923R0012 1 1 0.002 0.002 MSH-AR 1SAM201920R1000 1 0.010 MSAH1 1SAM201909R1021 1 0.035 Indication I-O and ON-OFF (recommended for MS116, MS4xx, MO4xx) Indication I-O and ON-OFF + Trip indication 3) Coded - Positioning of ON indication dependent from mounting orientation of the MMS 4) Uncoded - Positioning of ON indication independent from mounting orientation of the MMS 1) 2) 2CDC131053C0201 MSAH1 2/38 | ABB MS116, MS132, MO132, MS4xx, MO4xx General accessories 2 MSMN MSMNO MSAH1 OXS6X 2CDC131053C0201 MSHD 2CDC242022F0013 MSH-AR ABB | 2/39 Summary_3 3 3/0 | ABB With screw terminals 3-pole contactors B6, B7 AC operated BC6, BC7, B7D DC operated 3/4 3/5 3-pole reversing contactors VB6, VB7 AC operated VBC6, VBC7 DC operated VB6A, VB7A AC operated VBC6A, VBC7A DC operated 3/6 3/7 3/8 3/9 3-pole interface contactors BC6, BC7 DC operated 3/10 3-pole contactors - large coil voltage range TBC7 DC operated 3/11 4-pole contactors B6, B7 AC operated BC6, B7D DC operated 3/12 3/13 4-pole contactors - large coil voltage range TBC7 DC operated 3/14 Contactor relays K6 AC operated KC6 DC operated 3/15 3/16 Interface contactor relays KC6 DC operated 3/17 Contactor relays - large coil voltage range TKC6 DC operated 3/18 3 With soldering pins 3-pole contactors B6, B7 AC operated BC6, BC7 DC operated 3/19 3/20 3-pole reversing contactors VB6, VB7 AC operated VBC6, VBC7 DC operated VB6A, VB7A AC operated VBC7A DC operated 3/21 3/22 3/23 3/24 Contactor relays K6 AC operated KC6 DC operated 3/25 3/26 3-pole interface contactors BC6, BC7 DC operated 3/27 Interface contactors relays KC6 DC operated 3/28 With flat pin connection 3-pole contactors B6, B7 AC operated BC6, BC7 DC operated 3/29 3/30 3-pole reversing contactors VB7 AC operated VBC7 DC operated VB7A AC operated VBC7A DC operated 3/31 3/32 3/33 3/34 3-pole interface contactors BC6, BC7 DC operated 3/35 Contactors relays K6 AC operated KC6 DC operated 3/36 3/37 Interface contactors relays KC6 DC operated 3/38 Accessories 3/39 Technical data 3/41 ABB | 3/1 Summary_3 B mini contactors K mini contactor relays Mini contactors Screw terminals AC Control supply 3-pole contactors Coil consumption 3.5 W Type B6 B7 - - 3-pole reversing contactors Coil consumption 3.5 W Type - - VB6 VB6A2) VB7 VB7A2) 4-pole contactors Coil consumption 3.5 W Type B6 B7 - - 3-pole contactors Coil consumption 3.5 W Type BC6 - - 3-pole interface contactors Coil consumption 1.4 ... 2.4 W Type BC6 BC7 B7D1) BC7 - - 3-pole reversing contactors Coil consumption 3.5 W Type - - VBC6 VBC6A2) VBC7 VBC7A2) 4-pole contactors Coil consumption 3.5 W Type BC6 Wide range types Type - B7D TBC7 PLC types Extended coil voltage and temperature Coil consumption 1.7 W Type B6S1) B7S1) IEC 220-230-240 V kW 2.2 3 2.2 3 380-400 V kW 4 5.5 4 5.5 20 20 20 DC Control supply 3 Rated operational power AC-3 Rated operational current AC-1 UL/CSA 3-phase motor rating 400 V, θ ≤ 40 °C A 20 220-240 V AC hp 2 3 2 3 440-480 V AC hp 3 5 3 5 16 (600 V) 12 (300 V) 16 (600 V) A 12 (300 V) General use rating With integrated surge suppressor 2) With safety blocking function 1) Main accessories Auxiliary contact blocks Connection sets Surge suppressors Front mounting Side mounting For reversing contactors Varistor (AC/DC) CAF6 CA6 BSM6-30 RV-BC6 Overload relays Class 10 T16 Thermal overload relays Thermal and phase failure protection, with single setup possible Class 10E, 20E, 30E E16DU Electronic overload relays With single setup possible Manual motor starters Thermal / magnetic protection Magnetic only types Connecting link to manual motor starters Class 10 MS116, MS132 MO132 BEA7/132 Contactor relays Screw terminals AC Control supply Coil consumption 3.5 W Type 4-pole contactor relays Coil consumption 3.5 W Type 4-pole interface contactor relays Coil consumption 1.4 ... 2.4 W Type 4-pole contactor relays K6 DC Control supply Extended coil voltage and temperature Rated operational current AC-15 220-230-240 V 380-400 V Rated operational current DC-13 24 V Wide range types IEC KC6 KC6 Type TKC6 A 4 A 3 A 2.5 Main accessories Auxiliary contact blocks 2 Front mounting Side mounting CAF6 CA6-11K Soldering pins Flat pins B6...P B7...P - - B6...F B7...F - - - - VB6...P VB6A...P2) VB7...P VB7A...P2) - - VB6...F VB6A...F2) VB7...F VB7A...F2) - - - - - - BC6...P - - BC6...F - - - BC6...F BC7...F B7D...F1) BC7...F - BC6...P BC7...P B7D...P1) BC7...P - - - - VBC6...P VBC6A...P2) VBC7...P VBC7A...P2) - - VBC6...F VBC6A...F2) VBC7...F VBC7A...F2) - - - - 2.2 3 2.2 3 2.2 3 2.2 3 4 5.5 4 5.5 4 5.5 4 5.5 12 12 12 12 20 20 20 20 2 3 2 3 2 3 2 3 3 5 3 5 3 5 3 5 12 (300 V) 16 (600 V) 12 (300 V) 16 (600 V) 12 (300 V) 16 (600 V) 12 (300 V) 16 (600 V) CA6-11K-F - - - - - MS116, MS132 MO132 - MS116, MS132 MO132 - Soldering pins Flat pins K6...P K6...F KC6...P KC6...P KC6...F KC6...F 4 3 2.5 4 3 2.5 CA6-11K-P CA6-11K-F 2CDC102050C0201 CA6-11K-P - 3 ABB | 3/3 B6, B7 3-pole mini contactors – with screw terminals 4 to 5.5 kW AC operated 2CDC211001F0010 Description B6-30-10 Ordering details 2CDC211014F0011 B7-30-10 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control circuit 3-phase General voltage UC motor use rating rating 50 Hz 60 Hz 480 V hp B6 mini contactors 4 20 3 300 V / 12 A V AC V AC 24 24 42 42 48 48 Auxiliary Type contacts fitted 110 … 127 110 … 127 220 … 240 220 … 240 380 … 415 380 … 415 B7 mini contactors 5.5 20 5 600 V / 16 A 24 24 42 42 48 48 110 … 127 110 … 127 220 … 240 220 … 240 380 … 415 380 … 415 Order code Pkg Weight qty (1 pce) kg 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 B6-30-10-01 B6-30-01-01 B6-30-10-02 B6-30-01-02 B6-30-10-03 B6-30-01-03 B6-30-10-84 B6-30-01-84 B6-30-10-80 B6-30-01-80 B6-30-10-85 B6-30-01-85 GJL1211001R0101 GJL1211001R0011 GJL1211001R0102 GJL1211001R0012 GJL1211001R0103 GJL1211001R0013 GJL1211001R8104 GJL1211001R8014 GJL1211001R8100 GJL1211001R8010 GJL1211001R8105 GJL1211001R8015 10 10 10 10 10 10 10 10 10 10 10 10 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 B7-30-10-01 B7-30-01-01 B7-30-10-02 B7-30-01-02 B7-30-10-03 B7-30-01-03 B7-30-10-84 B7-30-01-84 B7-30-10-80 B7-30-01-80 B7-30-10-85 B7-30-01-85 GJL1311001R0101 GJL1311001R0011 GJL1311001R0102 GJL1311001R0012 GJL1311001R0103 GJL1311001R0013 GJL1311001R8104 GJL1311001R8014 GJL1311001R8100 GJL1311001R8010 GJL1311001R8105 GJL1311001R8015 10 10 10 10 10 10 10 10 10 10 10 10 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 Other types on request 2.26" 1.78" 1.66" 45.2 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 1.72" 4.5 0.18" B6, B7 3/4 | ABB 2CDC102008C0201 52.5 2CDC212001F0011 Main dimensions 57.5 3 B6, B7 3-pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: – – 3 main poles and one built-in auxiliary contact – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) – – add-on auxiliary contact blocks for front or side mounting and a wide range of accessories –– hum-free coil –– designed for rail or wall mounting BC6, BC7, B7D 3-pole mini contactors – with screw terminals 4 to 5.5 kW DC operated 2CDC211040F0011 Description BC6-30-10 BC6, BC7, B7D 3-pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: – – 3 main poles and one built-in auxiliary contact – – control circuit: DC operated, low consumption (3.5 W at pull-in and at holding) – – hum-free coil – – add-on auxiliary contact blocks for front or side mounting and a wide range of accessories – – designed for rail or wall mounting 3 UL/CSA Rated control Auxiliary Type 3-phase General circuit voltage contacts UC fitted motor use rating rating 480 V hp BC6 mini contactors 4 20 3 Order code Pkg Weight qty (1 pce) V DC 300 V / 12 A kg 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 BC6-30-10-07 BC6-30-01-07 BC6-30-10-01 BC6-30-01-01 BC6-30-10-16 BC6-30-01-16 BC6-30-10-03 BC6-30-01-03 BC6-30-10-04 BC6-30-01-04 BC6-30-10-05 BC6-30-01-05 GJL1213001R0107 GJL1213001R0017 GJL1213001R0101 GJL1213001R0011 GJL1213001R1106 GJL1213001R1016 GJL1213001R0103 GJL1213001R0013 GJL1213001R0104 GJL1213001R0014 GJL1213001R0105 GJL1213001R0015 10 10 10 10 10 10 10 10 10 10 10 10 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 12 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 BC7-30-10-07 BC7-30-01-07 BC7-30-10-01 BC7-30-01-01 BC7-30-10-16 BC7-30-01-16 BC7-30-10-03 BC7-30-01-03 BC7-30-10-04 BC7-30-01-04 BC7-30-10-05 BC7-30-01-05 GJL1313001R0107 GJL1313001R0017 GJL1313001R0101 GJL1313001R0011 GJL1313001R1106 GJL1313001R1016 GJL1313001R1103 GJL1313001R0013 GJL1313001R0104 GJL1313001R0014 GJL1313001R0105 GJL1313001R0015 10 10 10 10 10 10 10 10 10 10 10 10 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 B7D mini contactors with integrated suppressor diode 5.5 20 5 600 V / 24 1 16 A 0 220 1 0 0 1 0 1 B7D-30-10-01 B7D-30-01-01 B7D-30-10-05 B7D-30-01-05 GJL1317001R0101 GJL1317001R0011 GJL1317001R0105 GJL1317001R0015 10 10 10 10 0.175 0.175 0.175 0.175 24 48 60 110 … 125 220 … 240 BC7 mini contactors 5.5 20 5 600 V / 16 A 12 24 48 60 110 … 125 220 … 240 Other types on request 2.26" 1.78" 1.66" 42.2 47.5 2.07" 1.87" mm, inches 46.7 1.84" 43.7 1.72" 4.5 0.18" 2CDC102015C0201 52.5 2CDC212001F0011 Main dimensions 45.2 BC7-30-10 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 57.5 2CDC211013F0011 Ordering details BC6, BC7, B7D ABB | 3/5 VB6, VB7 3-pole mini reversing contactors – with screw terminals 4 to 5.5 kW AC operated 2CDC211006F0011 Description VB7-30-10 Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control circuit 3-phase General voltage UC motor use rating rating 480 V 50 Hz 60 Hz hp VB6 mini reversing contactors 4 20 3 300 V / 12 A VB7 mini reversing contactors 5.5 20 5 600 V / 16 A V AC V AC 24 24 42 42 48 48 110 … 127 110 … 127 220 … 240 220 … 240 380 … 415 380 … 415 24 24 42 42 48 48 110 … 127 110 … 127 220 … 240 220 … 240 380 … 415 380 … 415 Auxiliary Type contacts fitted Order code Pkg Weight qty (1 pce) kg 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VB6-30-10-01 VB6-30-01-01 VB6-30-10-02 VB6-30-01-02 VB6-30-10-03 VB6-30-01-03 VB6-30-10-84 VB6-30-01-84 VB6-30-10-80 VB6-30-01-80 VB6-30-10-85 VB6-30-01-85 GJL1211901R0101 GJL1211901R0011 GJL1211901R0102 GJL1211901R0012 GJL1211901R0103 GJL1211901R0013 GJL1211901R8104 GJL1211901R8014 GJL1211901R8100 GJL1211901R8010 GJL1211901R8105 GJL1211901R8015 5 5 5 5 5 5 5 5 5 5 5 5 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VB7-30-10-01 VB7-30-01-01 VB7-30-10-02 VB7-30-01-02 VB7-30-10-03 VB7-30-01-03 VB7-30-10-84 VB7-30-01-84 VB7-30-10-80 VB7-30-01-80 VB7-30-10-85 VB7-30-01-85 GJL1311901R0101 GJL1311901R0011 GJL1311901R0102 GJL1311901R0012 GJL1311901R0103 GJL1311901R0013 GJL1311901R8104 GJL1311901R8014 GJL1311901R8100 GJL1311901R8010 GJL1311901R8105 GJL1311901R8015 5 5 5 5 5 5 5 5 5 5 5 5 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 Other types on request Main dimensions mm, inches 46.7 1.84" 43.7 1.72" VB6, VB7 3/6 | ABB 2CDC102016C0201 4.5 0.18" 2CDC212005F0011 42.2 1.66" 45.2 1.78" 96.2 3.79" 57.5 2.26" 3 VB6, VB7 3-pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: – – built-in mechanical interlock. The coils must be mutually interlocked electrically and coils must be deenergised for 50 ms at least to prevent phase to phase short circuit on the arc. – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact blocks for front mounting –– designed for rail or wall mounting VBC6, VBC7 3-pole mini reversing contactors – with screw terminals 4 to 5.5 kW DC operated IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control Auxiliary Type 3-phase General circuit voltage contacts UC fitted motor use rating rating 480 V hp Order code Pkg Weight qty (1 pce) V DC VBC6 mini reversing contactors 4 20 3 300 V / 12 A 12 24 48 60 110 ... 125 220 … 240 VBC7 mini reversing contactors 5.5 20 5 600 V / 16 A 12 24 48 60 110 ... 125 220 … 240 kg 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VBC6-30-10-07 VBC6-30-01-07 VBC6-30-10-01 VBC6-30-01-01 VBC6-30-10-16 VBC6-30-01-16 VBC6-30-10-03 VBC6-30-01-03 VBC6-30-10-04 VBC6-30-01-04 VBC6-30-10-05 VBC6-30-01-05 GJL1213901R0107 GJL1213901R0017 GJL1213901R0101 GJL1213901R0011 GJL1213901R1106 GJL1213901R1016 GJL1213901R0103 GJL1213901R0013 GJL1213901R0104 GJL1213901R0014 GJL1213901R0105 GJL1213901R0015 5 5 5 5 5 5 5 5 5 5 5 5 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VBC7-30-10-07 VBC7-30-01-07 VBC7-30-10-01 VBC7-30-01-01 VBC7-30-10-16 VBC7-30-01-16 VBC7-30-10-03 VBC7-30-01-03 VBC7-30-10-04 VBC7-30-01-04 VBC7-30-10-05 VBC7-30-01-05 GJL1313901R0107 GJL1313901R0017 GJL1313901R0101 GJL1313901R0011 GJL1313901R1106 GJL1313901R1016 GJL1313901R0103 GJL1313901R0013 GJL1313901R0104 GJL1313901R0014 GJL1313901R0105 GJL1313901R0015 5 5 5 5 5 5 5 5 5 5 5 5 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 Other types on request Main dimensions mm, inches 46.7 1.84" 96.2 3.79" 43.7 1.72" 2CDC102017C0201 4.5 0.18" 2CDC212005F0011 42.2 1.66" VBC7-30-10 3 Ordering details 45.2 1.78" 2CDC211001F0011 VBC6-30-10 VBC6, VBC7 3-pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: – – built-in mechanical interlock. The coils must be mutually interlocked electrically and coils must be deenergised for 50 ms at least to prevent phase to phase short circuit on the arc. – – control circuit: DC operated – – low coil consumption (3.5 W at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact blocks for front mounting –– designed for rail or wall mounting 57.5 2.26" 2CDC211042F0011 Description VBC6, VBC7 ABB | 3/7 VB6A, VB7A 3-pole mini reversing contactors – with screw terminals 4 to 5.5 kW AC operated – with safety blocking function 2CDC211037F0011 Description VB6A-30-10 2CDC211008F0011 VB7A-30-10 Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control circuit 3-phase General voltage UC motor use rating rating 480 V 50 Hz 60 Hz hp V AC Auxiliary Type contacts fitted Order code Pkg Weight qty (1 pce) V AC kg VB6A mini reversing contactors with safety blocking function 4 20 3 300 V / 24 24 1 12 A 0 42 42 1 0 48 48 1 0 110 … 127 110 … 127 1 0 220 … 240 220 … 240 1 0 380 … 415 380 … 415 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VB6A-30-10-01 VB6A-30-01-01 VB6A-30-10-02 VB6A-30-01-02 VB6A-30-10-03 VB6A-30-01-03 VB6A-30-10-84 VB6A-30-01-84 VB6A-30-10-80 VB6A-30-01-80 VB6A-30-10-85 VB6A-30-01-85 GJL1211911R0101 GJL1211911R0011 GJL1211911R0102 GJL1211911R0012 GJL1211911R0103 GJL1211911R0013 GJL1211911R8104 GJL1211911R8014 GJL1211911R8100 GJL1211911R8010 GJL1211911R8105 GJL1211911R8015 5 5 5 5 5 5 5 5 5 5 5 5 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 VB7A mini reversing contactors with safety blocking function 5.5 20 5 600 V / 24 24 1 16 A 0 42 42 1 0 48 48 1 0 110 … 127 110 … 127 1 0 220 … 240 220 … 240 1 0 380 … 415 380 … 415 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VB7A-30-10-01 VB7A-30-01-01 VB7A-30-10-02 VB7A-30-01-02 VB7A-30-10-03 VB7A-30-01-03 VB7A-30-10-84 VB7A-30-01-84 VB7A-30-10-80 VB7A-30-01-80 VB7A-30-10-85 VB7A-30-01-85 GJL1311911R0101 GJL1311911R0011 GJL1311911R0102 GJL1311911R0012 GJL1311911R0103 GJL1311911R0013 GJL1311911R8104 GJL1311911R8014 GJL1311911R8100 GJL1311911R8010 GJL1311911R8105 GJL1311911R8015 5 5 5 5 5 5 5 5 5 5 5 5 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 Other types on request Main dimensions mm, inches 46.7 1.84" 3/8 | ABB 2CDC102018C0201 4.5 0.18" VB6A, VB7A 2CDC212005F0011 43.7 1.72" 42.2 1.66" 45.2 1.78" 96.2 3.79" 57.5 2.26" 3 VB6A, VB7A 3-pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: – – built-in mechanical interlock and safety blocking function. The safety blocking function is triggered if the voltage is applied to the coil of the contactor to be switched on before the contactor to be switched off has dropped out. The contactor coils are designed for continuous operation when the contactor is de-energised i.e. the coil is not damaged if the mechanical interlock prevents switch-on of the contactor with the coil voltage applied. – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact blocks for front mounting –– designed for rail or wall mounting VBC6A, VBC7A 3-pole mini reversing contactors – with screw terminals 4 to 5.5 kW DC operated – with safety blocking function 2CDC211044F0011 Description 2CDC211007F0011 VBC6A-30-10 VBC6A, VBC7A 3-pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: – – built-in mechanical interlock and safety blocking function. The safety blocking function is triggered if the voltage is applied to the coil of the contactor to be switched on before the contactor to be switched off has dropped out. The contactor coils are designed for continuous operation when the contactor is de-energised i.e. the coil is not damaged if the mechanical interlock prevents switch-on of the contactor with the coil voltage applied. – – control circuit: DC operated – – low coil consumption (3.5 W at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact blocks for front mounting –– designed for rail or wall mounting 3 Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control Auxiliary Type 3-phase General circuit voltage contacts UC fitted motor use rating rating 480 V hp Order code Pkg Weight qty (1 pce) V DC kg VBC6A mini reversing contactors with safety blocking function 4 20 3 300 V / 12 1 0 VBC6A-30-10-07 12 A 0 1 VBC6A-30-01-07 24 1 0 VBC6A-30-10-01 0 1 VBC6A-30-01-01 48 1 0 VBC6A-30-10-16 0 1 VBC6A-30-01-16 60 1 0 VBC6A-30-10-03 0 1 VBC6A-30-01-03 110 ... 125 1 0 VBC6A-30-10-04 0 1 VBC6A-30-01-04 220 … 240 1 0 VBC6A-30-10-05 0 1 VBC6A-30-01-05 GJL1213911R0107 GJL1213911R0017 GJL1213911R0101 GJL1213911R0011 GJL1213911R1106 GJL1213911R1016 GJL1213911R0103 GJL1213911R0013 GJL1213911R0104 GJL1213911R0014 GJL1213911R0105 GJL1213911R0015 5 5 5 5 5 5 5 5 5 5 5 5 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 VBC7A mini reversing contactors with safety blocking function 5.5 20 5 600 V / 12 1 0 VBC7A-30-10-07 16 A 0 1 VBC7A-30-01-07 24 1 0 VBC7A-30-10-01 0 1 VBC7A-30-01-01 48 1 0 VBC7A-30-10-16 0 1 VBC7A-30-01-16 60 1 0 VBC7A-30-10-03 0 1 VBC7A-30-01-03 110 ... 125 1 0 VBC7A-30-10-04 0 1 VBC7A-30-01-04 220 … 240 1 0 VBC7A-30-10-05 0 1 VBC7A-30-01-05 GJL1313911R0107 GJL1313911R0017 GJL1313911R0101 GJL1313911R0011 GJL1313911R1106 GJL1313911R0016 GJL1313911R0103 GJL1313911R0013 GJL1313911R0104 GJL1313911R0014 GJL1313911R0105 GJL1313911R0015 5 5 5 5 5 5 5 5 5 5 5 5 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 0.355 Other types on request Main dimensions mm, inches 46.7 1.84" 2CDC102019C0201 4.5 0.18" 2CDC212005F0011 43.7 1.72" 42.2 1.66" 45.2 1.78" 96.2 3.79" 57.5 2.26" VBC7A-30-10 VBC6A, VBC7A ABB | 3/9 BC6, BC7 3-pole interface mini contactors – with screw terminals 4 to 5.5 kW DC operated 2CDC211040F0011 Description BC6-30-10 Ordering details 2CDC211013F0011 BC7-30-10 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control Auxiliary Type 3-phase General circuit voltage contacts UC fitted motor use rating rating 480 V hp 5.5 20 5 300 V / 12 A 24 600 V / 16 A 24 DC operation 17 … 32 V / 2.4 W 4 20 3 300 V / 12 A 17 ... 32 5.5 17 ... 32 20 Order code Pkg Weight qty (1 pce) V DC DC operation 24 V / 1.4 W 4 20 3 5 600 V / 16 A kg 1 0 1 0 0 1 0 1 BC6-30-10-1.4-81 BC6-30-01-1.4-81 BC7-30-10-1.4-81 BC7-30-01-1.4-81 GJL1213001R8101 GJL1213001R8011 GJL1313001R8101 GJL1313001R8011 10 10 10 10 0.175 0.175 0.175 0.175 1 0 1 0 0 1 0 1 BC6-30-10-2.4-51 BC6-30-01-2.4-51 BC7-30-10-2.4-51 BC7-30-01-2.4-51 GJL1213001R5101 GJL1213001R5011 GJL1313001R5101 GJL1313001R5011 10 10 10 10 0.175 0.175 0.175 0.175 Connection to PLCs with integrated protective circuit DC operation 24 V / 1.7 W 4 20 3 5.5 20 5 300 V / 12 A 24 600 V / 16 A 24 DC operation 17 … 32 V / 2.8 W 4 20 3 300 V / 12 A 17 ... 32 5.5 17 ... 32 20 5 600 V / 16 A 1 0 1 0 0 1 0 1 B6S-30-10-1.7-71 B6S-30-01-1.7-71 B7S-30-10-1.7-71 B7S-30-01-1.7-71 GJL1213001R7101 GJL1213001R7011 GJL1313001R7101 GJL1313001R7011 10 10 10 10 0.175 0.175 0.175 0.175 1 0 1 0 0 1 0 1 B6S-30-10-2.8-72 B6S-30-01-2.8-72 B7S-30-10-2.8-72 B7S-30-01-2.8-72 GJL1213001R7102 GJL1213001R7012 GJL1313001R7102 GJL1313001R7012 10 10 10 10 0.175 0.175 0.175 0.175 Other types on request 2.26" 1.78" 1.66" 45.2 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 1.72" 4.5 0.18" BC6, BC7 3/10 | ABB 2CDC102010C0201 52.5 2CDC212001F0011 Main dimensions 57.5 3 BC6, BC7 3-pole interface mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: – – 3 main poles and one built-in auxiliary contact – – control circuit: DC operated, very low coil consumption. Suitable for direct control by PLC outputs – – hum-free coil – – no auxiliary contact block permitted for mounting – – designed for rail or wall mounting TBC7 3-pole mini contactors – with screw terminals 4 to 5.5 kW DC operated – large coil voltage range 3 Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control Auxiliary Type 3-phase General circuit voltage contacts UCmin ... UCmax fitted motor use rating rating 480 V hp Order code Pkg Weight qty (1 pce) V DC TBC7 mini contactors 5.5 20 5 600 V / 16 A 17 ... 32 50 ... 90 77 ... 143 140 ... 260 kg 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 TBC7-30-10-51 TBC7-30-01-51 TBC7-30-10-55 TBC7-30-01-55 TBC7-30-10-62 TBC7-30-01-62 TBC7-30-10-68 TBC7-30-01-68 GJL1313061R5101 GJL1313061R5011 GJL1313061R5105 GJL1313061R5015 GJL1313061R6102 GJL1313061R6012 GJL1313061R6108 GJL1313061R6018 10 10 10 10 10 10 10 10 0.185 0.185 0.185 0.185 0.185 0.185 0.185 0.185 Other types on request 2.26" 1.78" 1.66" 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 1.72" 4.5 0.18" 2CDC102020C0201 52.5 2CDC212001F0011 Main dimensions 45.2 TBC7-30-10 TBC7 3-pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: – – 3 main poles and one built-in auxiliary contact – – control circuit: DC operated – – low coil consumption (5 W at pull-in and at holding) – – hum-free coil –– expanded ambient temperature range -30 … +70 °C and wide range voltage supply –– no auxiliary contact block permitted for mounting –– designed for rail or wall mounting –– material is approved for railway applications 57.5 2CDC211015F0011 Description TBC7 ABB | 3/11 B6, B7 4-pole mini contactors – with screw terminals 4 to 5.5 kW AC operated 2CDC211028F0011 Description B6-22-00 Ordering details IEC UL/CSA Rated operational General use current rating θ ≤ 40 °C AC-1 Rated control Auxiliary Type circuit voltage contacts UC fitted 50/60 Hz A V AC 4 N.O. main poles 20 300 V / 12 A 20 600 V / 16 A 2 N.O. + 2 N.C. main poles 20 300 V / 12 A 20 600 V / 16 A Order code Pkg qty Weight (1 pce) kg 24 42 48 110 ... 127 220 ... 240 24 42 48 110 ... 127 220 ... 240 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B6-40-00-01 B6-40-00-02 B6-40-00-03 B6-40-00-84 B6-40-00-80 B7-40-00-01 B7-40-00-02 B7-40-00-03 B7-40-00-84 B7-40-00-80 GJL1211201R0001 GJL1211201R0002 GJL1211201R0003 GJL1211201R8004 GJL1211201R8000 GJL1311201R0001 GJL1311201R0002 GJL1311201R0003 GJL1311201R8004 GJL1311201R8000 10 10 10 10 10 10 10 10 10 10 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 24 42 48 110 ... 127 220 ... 240 24 42 48 110 ... 127 220 ... 240 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B6-22-00-01 B6-22-00-02 B6-22-00-03 B6-22-00-84 B6-22-00-80 B7-22-00-01 B7-22-00-02 B7-22-00-03 B7-22-00-84 B7-22-00-80 GJL1211501R0001 GJL1211501R0002 GJL1211501R0003 GJL1211501R8004 GJL1211501R8000 GJL1311501R0001 GJL1311501R0002 GJL1311501R0003 GJL1311501R8004 GJL1311501R8000 10 10 10 10 10 10 10 10 10 10 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 Other types on request 2.26" 1.78" 1.66" 45.2 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 1.72" 4.5 0.18" B6, B7 3/12 | ABB 2CDC102009C0201 52.5 2CDC212001F0011 Main dimensions 57.5 3 B6, B7 4-pole mini contactors are compact control products mainly used for switching resistive loads up to 690 V AC. These contactors are designed with: – – 4 main poles – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) – – add-on auxiliary contact blocks for front or side mounting and a wide range of accessories –– hum-free coil –– designed for rail or wall mounting BC6, B7D 4-pole mini contactors – with screw terminals 4 to 5.5 kW DC operated 3 Ordering details IEC UL/CSA Rated operational current θ ≤ 40 °C AC-1 A General use rating Rated control Auxiliary Type circuit voltage contacts UC fitted Order code Pkg Weight qty (1 pce) V DC 4 N.O. main poles 20 600 V / 16 A 2 N.O. + 2 N.C. main poles 20 300 V / 12 A kg 24 220 0 0 0 0 B7D-40-00-01 B7D-40-00-05 GJL1317201R0001 GJL1317201R0005 10 10 0.175 0.175 12 24 42 48 60 110 ... 125 220 ... 240 0 0 0 0 0 0 0 0 0 0 0 0 0 0 BC6-22-00-07 BC6-22-00-01 BC6-22-00-02 BC6-22-00-16 BC6-22-00-03 BC6-22-00-04 BC6-22-00-05 GJL1213501R0007 GJL1213501R0001 GJL1213501R0002 GJL1213501R1006 GJL1213501R0003 GJL1213501R0004 GJL1213501R0005 10 10 10 10 10 10 10 0.175 0.175 0.175 0.175 0.175 0.175 0.175 Other types on request 2.26" 1.78" 1.66" 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 1.72" 4.5 0.18" 2CDC102021C0201 52.5 2CDC212001F0011 Main dimensions 45.2 BC6-22-00 BC6, B7D 4-pole mini contactors are compact control products mainly used for switching resistive loads up to 690 V AC. These contactors are designed with: – – 4 main poles – – control circuit: DC operated – – low coil consumption (3.5 W at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact blocks for front or side mounting –– designed for rail or wall mounting 57.5 2CDC211032F0011 Description BC6, B7D ABB | 3/13 TBC7 4-pole mini contactors – with screw terminals 4 to 5.5 kW DC operated – large coil voltage range 2CDC211026F0011 Description TBC7-31-00 Ordering details IEC UL/CSA Rated operational General use current rating θ ≤ 40 °C AC-1 A 3 N.O. + 1 N.C. main poles 20 600 V / 16 A 2 N.O. + 2 N.C. main poles 20 600 V / 16 A Rated control Auxiliary Type circuit voltage contacts UC min ... UC max fitted Order code Pkg Weight qty (1 pce) V DC kg 50 ... 90 77 ... 143 140 ... 260 0 0 0 0 0 0 TBC7-31-00-55 TBC7-31-00-62 TBC7-31-00-68 GJL1313461R5005 GJL1313461R6002 GJL1313461R6008 10 10 10 0.185 0.185 0.185 50 ... 90 77 ... 143 140 ... 260 0 0 0 0 0 0 TBC7-22-00-55 TBC7-22-00-62 TBC7-22-00-68 GJL1313561R5005 GJL1313561R6002 GJL1313561R6008 10 10 10 0.185 0.185 0.185 Other types on request 2.26" 1.78" 1.66" 45.2 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 1.72" 4.5 0.18" TBC7 3/14 | ABB 2CDC102022C0201 52.5 2CDC212001F0011 Main dimensions 57.5 3 TBC7 4-pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: – – 4 main poles – – control circuit: DC operated – – low coil consumption (5 W at pull-in and at holding) – – hum-free coil –– expanded ambient temperature range -30 … +70 °C and wide range voltage supply –– no auxiliary contact block permitted for mounting –– designed for rail or wall mounting –– material is approved for railway applications K6 4-pole mini contactor relays – with screw terminals AC operated 2CDC211012F0011 Description K6-22Z K6 4-pole mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: – – 4-poles with various contact combinations – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact blocks for front or side mounting –– designed for rail or wall mounting 3 Type 50 Hz 60 Hz V AC V AC Order code Pkg Weight qty (1 pce) kg K6 4-pole mini contactor relays 24 24 42 42 48 48 110 ...127 110 ...127 220 ... 240 220 ... 240 380 ... 415 380 ... 415 24 24 42 42 48 48 110 ...127 110 ...127 220 ... 240 220 ... 240 380 ... 415 380 ... 415 24 24 42 42 48 48 110 ...127 110 ...127 220 ... 240 220 ... 240 380 ... 415 380 ... 415 K6-22Z-01 K6-22Z-02 K6-22Z-03 K6-22Z-84 K6-22Z-80 K6-22Z-85 K6-31Z-01 K6-31Z-02 K6-31Z-03 K6-31Z-84 K6-31Z-80 K6-31Z-85 K6-40E-01 K6-40E-02 K6-40E-03 K6-40E-84 K6-40E-80 K6-40E-85 GJH1211001R0221 GJH1211001R0222 GJH1211001R0223 GJH1211001R8224 GJH1211001R8220 GJH1211001R8225 GJH1211001R0311 GJH1211001R0312 GJH1211001R0313 GJH1211001R8314 GJH1211001R8310 GJH1211001R8315 GJH1211001R0401 GJH1211001R0402 GJH1211001R0403 GJH1211001R8404 GJH1211001R8400 GJH1211001R8405 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 Other types on request 2.26" 1.78" 1.66" 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 1.72" 4.5 0.18" 2CDC102011C0201 52.5 2CDC212001F0011 Main dimensions 45.2 K6-31Z Rated control circuit voltage UC 57.5 2CDC211004F0010 Ordering details K6 ABB | 3/15 KC6 4-pole mini contactor relays – with screw terminals DC operated 2CDC211016F0011 Description KC6-22Z Ordering details Rated control circuit voltage UC Type Order code Pkg Weight qty (1 pce) V DC kg KC6 4-pole mini contactor relays 12 24 48 60 110 ... 125 220 ... 240 12 24 48 60 110 ... 125 220 ... 240 12 24 48 60 110 ... 125 220 ... 240 KC6-22Z-07 KC6-22Z-01 KC6-22Z-16 KC6-22Z-03 KC6-22Z-04 KC6-22Z-05 KC6-31Z-07 KC6-31Z-01 KC6-31Z-16 KC6-31Z-03 KC6-31Z-04 KC6-31Z-05 KC6-40E-07 KC6-40E-01 KC6-40E-16 KC6-40E-03 KC6-40E-04 KC6-40E-05 GJH1213001R0227 GJH1213001R0221 GJH1213001R1226 GJH1213001R0223 GJH1213001R0224 GJH1213001R0225 GJH1213001R0317 GJH1213001R0311 GJH1213001R1316 GJH1213001R0313 GJH1213001R0314 GJH1213001R0315 GJH1213001R0407 GJH1213001R0401 GJH1213001R1406 GJH1213001R0403 GJH1213001R0404 GJH1213001R0405 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 0.175 Other types on request 2.26" 1.78" 1.66" 45.2 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 1.72" 4.5 0.18" KC6 3/16 | ABB 2CDC102012C0201 52.5 2CDC212001F0011 Main dimensions 57.5 3 KC6 4-pole mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: – – 4-poles with various contact combinations – – control circuit: DC operated – – low coil consumption (3.5 W at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact blocks for front or side mounting –– designed for rail or wall mounting KC6 4-pole interface mini contactor relays – with screw terminals DC operated 3 Ordering details Rated control circuit voltage UC Type Order code Pkg Weight qty (1 pce) V DC kg DC operation 24 V / 1.4 W 24 24 KC6-31Z-1.4-81 KC6-40E-1.4-81 GJH1213001R8311 GJH1213001R8401 10 10 0.175 0.175 DC operation 17 ... 32 V / 2.4 W 17 ... 32 17 ... 32 KC6-31Z-2.4-51 KC6-40E-2.4-51 GJH1213001R5311 GJH1213001R5401 10 10 0.175 0.175 DC operation 24 V / 1.7 W 24 24 24 K6S-22Z-1.7-71 K6S-31Z-1.7-71 K6S-40E-1.7-71 GJH1213001R7221 GJH1213001R7311 GJH1213001R7401 10 10 10 0.175 0.175 0.175 DC operation 17 ... 32 V / 2.8 W 17 ... 32 17 ... 32 17 ... 32 K6S-22Z-2.8-72 K6S-31Z-2.8-72 K6S-40E-2.8-72 GJH1213001R7222 GJH1213001R7312 GJH1213001R7402 10 10 10 0.175 0.175 0.175 Other types on request 2.26" 1.78" 1.66" 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 1.72" 4.5 0.18" 2CDC102013C0201 52.5 2CDC212001F0011 Main dimensions 45.2 KC6-31Z KC6 4-pole interface mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: – – 4-poles with various contact combinations – – control circuit: DC operated – – low coil consumption (1.4 ... 2.8 W at pull-in and at holding) – – hum-free coil –– no auxiliary contact block permitted for mounting –– designed for rail or wall mounting 57.5 2CDC211017F0011 Description KC6 ABB | 3/17 TKC6 4-pole mini contactor relays – with screw terminals DC operated – large coil voltage range 2CDC211021F0011 Description TKC6-31Z Ordering details Rated control circuit voltage UC min ... UC max V DC 17 ... 32 50 ... 90 77 ... 143 140 ... 260 17 ... 32 50 ... 90 77 ... 143 140 ... 260 17 ... 32 50 ... 90 77 ... 143 140 ... 260 Type Order code Pkg Weight qty (1 pce) TKC6-22Z-51 TKC6-22Z-55 TKC6-22Z-62 TKC6-22Z-68 TKC6-31Z-51 TKC6-31Z-55 TKC6-31Z-62 TKC6-31Z-68 TKC6-40E-51 TKC6-40E-55 TKC6-40E-62 TKC6-40E-68 GJH1213061R5221 GJH1213061R5225 GJH1213061R6222 GJH1213061R6228 GJH1213061R5311 GJH1213061R5315 GJH1213061R6312 GJH1213061R6318 GJH1213061R5401 GJH1213061R5405 GJH1213061R6402 GJH1213061R6408 10 10 10 10 10 10 10 10 10 10 10 10 kg 0.180 0.180 0.180 0.180 0.180 0.180 0.180 0.180 0.180 0.180 0.180 0.180 Other types on request 2.26" 1.78" 1.66" 45.2 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 1.72" 4.5 0.18" TKC6 3/18 | ABB 2CDC102014C0201 52.5 2CDC212001F0011 Main dimensions 57.5 3 TKC6 4-pole mini contactors are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: – – 4-poles with various contact combinations – – control circuit: DC operated, hum free, low consumption (5 W at pull-in and at holding) – – expanded ambient temperature range -30 … +70 °C and wide range voltage supply – – material is suitable for railway applications – – humfree operating DC coil – – no auxiliary contact block permitted for mounting – – designed for rail or wall mounting B6, B7 3-pole mini contactors – with soldering pins 4 to 5.5 kW AC operated IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control circuit 3-phase General voltage UC motor use rating rating 50 Hz 60 Hz 480 V hp B6 mini contactors 4 12 3 300 V / 12 A V AC V AC 24 24 42 42 48 48 110 … 127 110 … 127 220 … 240 220 … 240 380 … 415 380 … 415 B7 mini contactors 5.5 12 5 600 V / 16 A 24 24 42 42 48 48 110 … 127 110 … 127 220 … 240 220 … 240 380 … 415 380 … 415 Auxiliary Type contacts fitted Order code Pkg Weight qty (1 pce) kg 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 B6-30-10-P-01 B6-30-01-P-01 B6-30-10-P-02 B6-30-01-P-02 B6-30-10-P-03 B6-30-01-P-03 B6-30-10-P-84 B6-30-01-P-84 B6-30-10-P-80 B6-30-01-P-80 B6-30-10-P-85 B6-30-01-P-85 GJL1211009R0101 GJL1211009R0011 GJL1211009R0102 GJL1211009R0012 GJL1211009R0103 GJL1211009R0013 GJL1211009R8104 GJL1211009R8014 GJL1211009R8100 GJL1211009R8010 GJL1211009R8105 GJL1211009R8015 10 10 10 10 10 10 10 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 B7-30-10-P-01 B7-30-01-P-01 B7-30-10-P-02 B7-30-01-P-02 B7-30-10-P-03 B7-30-01-P-03 B7-30-10-P-84 B7-30-01-P-84 B7-30-10-P-80 B7-30-01-P-80 B7-30-10-P-85 B7-30-01-P-85 GJL1311009R0101 GJL1311009R0011 GJL1311009R0102 GJL1311009R0012 GJL1311009R0103 GJL1311009R0013 GJL1311009R8104 GJL1311009R8014 GJL1311009R8100 GJL1311009R8010 GJL1311009R8105 GJL1311009R8015 10 10 10 10 10 10 10 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 Other types on request mm, inches 47.7 1.88" 4.3 0.17" 44.7 1.76" 2CDC102023C0201 47.5 1.87" 2CDC212003F0011 Main dimensions 1 0.04" B7-30-10-P 3 Ordering details 42.2 1.66" 2CDC211011F0011 B6-30-10-P B6..P and B7..P 3-pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: – – 3 main poles and one built-in auxiliary contact – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) –– hum-free coil –– add-on auxiliary contact blocks for side mounting –– designed for soldering on PCB boards 45.2 1.78" 2CDC211003F0010 Description B6, B7 ABB | 3/19 BC6, BC7 3-pole mini contactors – with soldering pins 4 to 5.5 kW DC operated 2CDC211030F0011 Description BC7-30-10-P Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control Auxiliary Type 3-phase General circuit voltage contacts UC fitted motor use rating rating 480 V hp Order code Pkg Weight qty (1 pce) V DC kg BC6 mini contactors with 3 N.O. main poles 4 12 3 300 V / 12 12 A 24 48 60 110 … 125 220 … 240 BC7 mini contactors with 3 N.O. main poles 5.5 12 5 600 V / 12 16 A 24 48 60 110 … 125 220 … 240 BC6 mini contactors 2 N.O. + 1 N.C. main poles 4 12 3 300 V / 24 12 A 48 60 110 … 125 220 … 240 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 BC6-30-10-P-07 BC6-30-01-P-07 BC6-30-10-P-01 BC6-30-01-P-01 BC6-30-10-P-16 BC6-30-01-P-16 BC6-30-10-P-03 BC6-30-01-P-03 BC6-30-10-P-04 BC6-30-01-P-04 BC6-30-10-P-05 BC6-30-01-P-05 GJL1213009R0107 GJL1213009R0017 GJL1213009R0101 GJL1213009R0011 GJL1213009R1106 GJL1213009R1016 GJL1213009R0103 GJL1213009R0013 GJL1213009R0104 GJL1213009R0014 GJL1213009R0105 GJL1213009R0015 10 10 10 10 10 10 10 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 BC7-30-10-P-07 BC7-30-01-P-07 BC7-30-10-P-01 BC7-30-01-P-01 BC7-30-10-P-16 BC7-30-01-P-16 BC7-30-10-P-03 BC7-30-01-P-03 BC7-30-10-P-04 BC7-30-01-P-04 BC7-30-10-P-05 BC7-30-01-P-05 GJL1313009R0107 GJL1313009R0017 GJL1313009R0101 GJL1313009R0011 GJL1313009R1106 GJL1313009R1016 GJL1313009R0103 GJL1313009R0013 GJL1313009R0104 GJL1313009R0014 GJL1313009R0105 GJL1313009R0015 10 10 10 10 10 10 10 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 1 1 1 1 1 0 0 0 0 0 BC6-21-10-P-01 BC6-21-10-P-16 BC6-21-10-P-03 BC6-21-10-P-04 BC6-21-10-P-05 GJL1213109R0101 GJL1213109R1106 GJL1213109R0103 GJL1213109R0104 GJL1213109R0105 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 Other types on request mm, inches 47.7 1.88" 3/20 | ABB 2CDC102024C0201 B6, B7 4.3 0.17" 44.7 1.76" 2CDC212003F0011 42.2 1.66" 47.5 1.87" 1 0.04" Main dimensions 45.2 1.78" 3 BC6, BC7 3-pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: – – 3 main poles and one built-in auxiliary contact – – control circuit: DC operated – – low coil consumption (3.5 W at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact blocks for side mounting –– designed for soldering on PCB boards VB6, VB7 3-pole mini reversing contactors – with soldering pins 4 to 5.5 kW AC operated 3 Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control circuit Auxiliary Type contacts 3-phase General voltage UC fitted motor use rating rating 480 V 50 Hz 60 Hz hp VB6 mini reversing contactors 4 12 3 300 V / 12 A V AC V AC 24 24 42 42 48 48 110 … 127 110 … 127 220 … 240 220 … 240 380 … 415 380 … 415 VB7 mini reversing contactors 5.5 12 5 600 V / 16 A 24 24 42 42 48 48 110 … 127 110 … 127 220 … 240 220 … 240 380 … 415 380 … 415 Order code Pkg Weight qty (1 pce) kg 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VB6-30-10-P-01 VB6-30-01-P-01 VB6-30-10-P-02 VB6-30-01-P-02 VB6-30-10-P-03 VB6-30-01-P-03 VB6-30-10-P-84 VB6-30-01-P-84 VB6-30-10-P-80 VB6-30-01-P-80 VB6-30-10-P-85 VB6-30-01-P-85 GJL1211909R0101 GJL1211909R0011 GJL1211909R0102 GJL1211909R0012 GJL1211909R0103 GJL1211909R0013 GJL1211909R8104 GJL1211909R8014 GJL1211909R8100 GJL1211909R8010 GJL1211909R8105 GJL1211909R8015 5 5 5 5 5 5 5 5 5 5 5 5 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VB7-30-10-P-01 VB7-30-01-P-01 VB7-30-10-P-02 VB7-30-01-P-02 VB7-30-10-P-03 VB7-30-01-P-03 VB7-30-10-P-84 VB7-30-01-P-84 VB7-30-10-P-80 VB7-30-01-P-80 VB7-30-10-P-85 VB7-30-01-P-85 GJL1311909R0101 GJL1311909R0011 GJL1311909R0102 GJL1311909R0012 GJL1311909R0103 GJL1311909R0013 GJL1311909R8104 GJL1311909R8014 GJL1311909R8100 GJL1311909R8010 GJL1311909R8105 GJL1311909R8015 5 5 5 5 5 5 5 5 5 5 5 5 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 Other types on request mm, inches 47.7 1.88" 4.3 0.17" 44.7 1.76" 1 0.04" 42.2 1.66" 96.2 3.79" 0.18" 2CDC102025C0201 4.5 2CDC212007F0011 Main dimensions 45.2 1.78" VB7-30-10-P VB6, VB7 3-pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: – – built-in mechanical interlock. The coils must be mutually interlocked electrically and coils must be deenergised for 50 ms at least to prevent phase to phase short circuit on the arc – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) – – hum-free coil –– no auxiliary contact block permitted for mounting –– designed for soldering on PCB boards 57.5 2.26" 2CDC211010S0011 Description VB6, VB7 ABB | 3/21 VBC6, VBC7 3-pole mini reversing contactors – with soldering pins 4 to 5.5 kW DC operated 2CDC211009F0011 Description VBC7-30-10-P Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control Auxiliary Type 3-phase General circuit voltage contacts UC fitted motor use rating rating 480 V hp Order code Pkg Weight qty (1 pce) V DC VBC6 mini reversing contactors 4 12 3 300 V / 12 A 12 24 48 60 110 ... 125 220 … 240 VBC7 mini reversing contactors 5.5 12 5 600 V / 16 A 12 24 48 60 110 ... 125 220 … 240 kg 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VBC6-30-10-P-07 VBC6-30-01-P-07 VBC6-30-10-P-01 VBC6-30-01-P-01 VBC6-30-10-P-06 VBC6-30-06-P-06 VBC6-30-10-P-03 VBC6-30-01-P-03 VBC6-30-10-P-04 VBC6-30-01-P-04 VBC6-30-10-P-05 VBC6-30-01-P-05 GJL1213909R0107 GJL1213909R0017 GJL1213909R0101 GJL1213909R0011 GJL1213909R0106 GJL1213909R0016 GJL1213909R0103 GJL1213909R0013 GJL1213909R0104 GJL1213909R0014 GJL1213909R0105 GJL1213909R0015 5 5 5 5 5 5 5 5 5 5 5 5 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VBC7-30-10-P-07 VBC7-30-01-P-07 VBC7-30-10-P-01 VBC7-30-01-P-01 VBC7-30-10-P-16 VBC7-30-01-P-16 VBC7-30-10-P-03 VBC7-30-01-P-03 VBC7-30-10-P-04 VBC7-30-01-P-04 VBC7-30-10-P-05 VBC7-30-01-P-05 GJL1313909R0107 GJL1313909R0017 GJL1313909R0101 GJL1313909R0011 GJL1313909R1106 GJL1313909R1016 GJL1313909R0103 GJL1313909R0013 GJL1313909R0104 GJL1313909R0014 GJL1313909R0105 GJL1313909R0015 5 5 5 5 5 5 5 5 5 5 5 5 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 Other types on request mm, inches 47.7 1.88" 3/22 | ABB 0.18" 2CDC102026C0201 1 0.04" 42.2 1.66" 45.2 1.78" 4.5 VBC6, VBC7 4.3 0.17" 44.7 1.76" 96.2 3.79" 2CDC212007F0011 Main dimensions 57.5 2.26" 3 VBC6, VBC7 3-pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: – – built-in mechanical interlock. The coils must be mutually interlocked electrically and coils must be deenergised for 50 ms at least to prevent phase to phase short circuit on the arc – – control circuit: DC operated – – low coil consumption (3.5 W at pull-in and at holding) – – hum-free coil –– no auxiliary contact block permitted for mounting –– designed for soldering on PCB boards VB6A, VB7A 3-pole mini reversing contactors – with soldering pins 4 to 5.5 kW AC operated – with safety blocking function 3 Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control circuit Auxiliary Type contacts 3-phase General voltage UC fitted motor use rating rating 480 V 50 Hz 60 Hz hp V AC Order code Pkg Weight qty (1 pce) V AC kg VB6A mini reversing contactors with safety blocking function 4 12 3 300 V / 24 24 1 12 A 0 42 42 1 0 48 48 1 0 110 … 127 110 … 127 1 0 220 … 240 220 … 240 1 0 380 … 415 380 … 415 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VB6A-30-10-P-01 VB6A-30-01-P-01 VB6A-30-10-P-02 VB6A-30-01-P-02 VB6A-30-10-P-03 VB6A-30-01-P-03 VB6A-30-10-P-84 VB6A-30-01-P-84 VB6A-30-10-P-80 VB6A-30-01-P-80 VB6A-30-10-P-85 VB6A-30-01-P-85 GJL1211919R0101 GJL1211919R0011 GJL1211919R0102 GJL1211919R0012 GJL1211919R0103 GJL1211919R0013 GJL1211919R8104 GJL1211919R8014 GJL1211919R8100 GJL1211919R8010 GJL1211919R8105 GJL1211919R8015 5 5 5 5 5 5 5 5 5 5 5 5 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 VB7A mini reversing contactors with safety blocking function 5.5 12 5 600 V / 24 24 1 16 A 0 42 42 1 0 48 48 1 0 110 … 127 110 … 127 1 0 220 … 240 220 … 240 1 0 380 … 415 380 … 415 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VB7A-30-10-P-01 VB7A-30-01-P-01 VB7A-30-10-P-02 VB7A-30-01-P-02 VB7A-30-10-P-03 VB7A-30-01-P-03 VB7A-30-10-P-84 VB7A-30-01-P-84 VB7A-30-10-P-80 VB7A-30-01-P-80 VB7A-30-10-P-85 VB7A-30-01-P-85 GJL1311919R0101 GJL1311919R0011 GJL1311919R0102 GJL1311919R0012 GJL1311919R0103 GJL1311919R0013 GJL1311919R8104 GJL1311919R8014 GJL1311919R8100 GJL1311919R8010 GJL1311919R8105 GJL1311919R8015 5 5 5 5 5 5 5 5 5 5 5 5 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 Other types on request mm, inches 47.7 1.88" 4.3 0.17" 44.7 1.76" 1 0.04" 42.2 1.66" 96.2 3.79" 0.18" 2CDC102027C0201 4.5 2CDC212007F0011 Main dimensions 45.2 1.78" VB7-30-01-P VB6A, VB7A 3-pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: – – built-in mechanical interlock and safety blocking function. The safety blocking function is triggered if the voltage is applied to the coil of the contactor to be switched on before the contactor to be switched off has dropped out. The contactor coils are designed for continuous operation when the contactor is de-energised i.e. the coil is not damaged if the mechanical interlock prevents switch-on of the contactor with the coil voltage applied. – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) – – hum-free coil –– no auxiliary contact block permitted for mounting –– designed for soldering on PCB boards 57.5 2.26" 2CDC211013F0010 Description VB6A, VB7A ABB | 3/23 VBC7A 3-pole mini reversing contactors – with soldering pins 4 to 5.5 kW DC operated – with safety blocking function 2CDC211009F0011 Description VBC7A-30-10-P Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control Auxiliary Type 3-phase General circuit voltage contacts UC fitted motor use rating rating 480 V hp Order code Pkg Weight qty (1 pce) V DC kg VBC7A mini reversing contactors with safety blocking function 5.5 12 5 600 V / 12 1 0 VBC7A-30-10-P-07 16 A 0 1 VBC7A-30-01-P-07 24 1 0 VBC7A-30-10-P-01 0 1 VBC7A-30-01-P-01 48 1 0 VBC7A-30-10-P-16 0 1 VBC7A-30-01-P-16 60 1 0 VBC7A-30-10-P-03 0 1 VBC7A-30-01-P-03 110 ... 125 1 0 VBC7A-30-10-P-04 0 1 VBC7A-30-01-P-04 220 … 240 1 0 VBC7A-30-10-P-05 0 1 VBC7A-30-01-P-05 GJL1313919R0107 GJL1313919R0017 GJL1313919R0101 GJL1313919R0011 GJL1313919R1106 GJL1313919R1016 GJL1313919R0103 GJL1313919R0013 GJL1313919R0104 GJL1313919R0014 GJL1313919R0105 GJL1313919R0015 5 5 5 5 5 5 5 5 5 5 5 5 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 Other types on request mm, inches 47.7 1.88" 3/24 | ABB 0.18" 2CDC102028C0201 1 0.04" 42.2 1.66" 45.2 1.78" 4.5 VBC7A 4.3 0.17" 44.7 1.76" 96.2 3.79" 2CDC212007F0011 Main dimensions 57.5 2.26" 3 VBC7A 3-pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: – – built-in mechanical interlock and safety blocking function. The safety blocking function is triggered if the voltage is applied to the coil of the contactor to be switched on before the contactor to be switched off has dropped out. The contactor coils are designed for continuous operation when the contactor is de-energised i.e. the coil is not damaged if the mechanical interlock prevents switch-on of the contactor with the coil voltage applied. – – control circuit: AC operated – – low coil consumption (3.5 W at pull-in and at holding) – – hum-free coil –– no auxiliary contact block permitted for mounting –– designed for soldering on PCB boards K6 4-pole mini contactor relays – with soldering pins AC operated 3 Ordering details Rated control circuit voltage UC 50 Hz V AC Type Order code Pkg Weight qty (1 pce) 60 Hz V AC kg K6 4-pole mini contactor relays 24 24 42 42 48 48 110 ...127 110 ...127 220 ... 240 220 ... 240 380 ... 415 380 ... 415 24 24 42 42 48 48 110 ...127 110 ...127 220 ... 240 220 ... 240 380 ... 415 380 ... 415 24 24 42 42 48 48 110 ...127 110 ...127 220 ... 240 220 ... 240 380 ... 415 380 ... 415 K6-22Z-P-01 K6-22Z-P-02 K6-22Z-P-03 K6-22Z-P-84 K6-22Z-P-80 K6-22Z-P-85 K6-31Z-P-01 K6-31Z-P-02 K6-31Z-P-03 K6-31Z-P-84 K6-31Z-P-80 K6-31Z-P-85 K6-40E-P-01 K6-40E-P-02 K6-40E-P-03 K6-40E-P-84 K6-40E-P-80 K6-40E-P-85 GJH1211009R0221 GJH1211009R0222 GJH1211009R0223 GJH1211009R8224 GJH1211009R8220 GJH1211009R8225 GJH1211009R0311 GJH1211009R0312 GJH1211009R0313 GJH1211009R8314 GJH1211009R8310 GJH1211009R8315 GJH1211009R0401 GJH1211009R0402 GJH1211009R0403 GJH1211009R8404 GJH1211009R8400 GJH1211009R8405 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 Other types on request mm, inches 47.7 1.88" 4.3 0.17" 44.7 1.76" 2CDC102030C0201 2CDC212003F0011 47.5 1.87" 1 0.04" Main dimensions 42.2 1.66" K6-22Z-P K6 4-pole mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: – – 4-poles with various contact combinations – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact block for side mounting –– designed for soldering on PCB boards 45.2 1.78" 2CDC211022F0011 Description K6 ABB | 3/25 KC6 4-pole mini contactor relays – with soldering pins DC operated 2CDC211025F0011 Description KC6-22Z-P Ordering details 2CDC211023F0011 KC6-31Z-P Rated control circuit voltage UC Type Order code Pkg Weight qty (1 pce) V DC kg K6 4-pole mini contactor relays 12 24 48 110 ... 125 220 ... 240 24 48 110 ... 125 220 ... 240 12 24 48 110 ... 125 220 ... 240 KC6-22Z-P-07 KC6-22Z-P-01 KC6-22Z-P-16 KC6-22Z-P-04 KC6-22Z-P-05 KC6-31Z-P-01 KC6-31Z-P-16 KC6-31Z-P-04 KC6-31Z-P-05 KC6-40E-P-07 KC6-40E-P-01 KC6-40E-P-16 KC6-40E-P-04 KC6-40E-P-05 GJH1213009R0227 GJH1213009R0221 GJH1213009R1226 GJH1213009R0224 GJH1213009R0225 GJH1213009R0311 GJH1213009R1316 GJH1213009R0314 GJH1213009R0315 GJH1213009R0407 GJH1213009R0401 GJH1213009R1406 GJH1213009R0404 GJH1213009R0405 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 Other types on request mm, inches 47.7 1.88" 3/26 | ABB 2CDC102031C0201 KC6 4.3 0.17" 44.7 1.76" 2CDC212003F0011 42.2 1.66" 47.5 1.87" 1 0.04" Main dimensions 45.2 1.78" 3 KC6 4-pole mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: – – 4-poles with various contact combinations – – control circuit: DC operated – – low coil consumption (3.5 W at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact block for side mounting –– designed for soldering on PCB boards BC6, BC7 3-pole interface mini contactors – with soldering pins 4 to 5.5 kW DC operated 3 Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control Auxiliary Type 3-phase General circuit voltage contacts UC fitted motor use rating rating 480 V hp Order code Pkg Weight qty (1 pce) V DC DC operation 24 V / 1.4 W 4 12 3 0 BC6-30-10-P-1.4-81 GJL1213009R8101 10 0.170 0 1 BC6-30-01-P-1.4-81 GJL1213009R8011 10 0.170 1 0 BC7-30-10-P-1.4-81 GJL1313009R8101 10 0.170 0 1 BC7-30-01-P-1.4-81 GJL1313009R8011 10 0.170 DC operation 17 … 32 V / 2.4 W, Ith < 8 A 4 12 3 300 V / 17 ... 32 12 A 1 0 BC6-30-10-P-2.4-51 GJL1213009R5101 10 0.170 0 1 BC6-30-01-P-2.4-51 GJL1213009R5011 10 0.170 5.5 1 0 BC7-30-10-P-2.4-51 GJL1313009R5101 10 0.170 0 1 BC7-30-01-P-2.4-51 GJL1313009R5011 10 0.170 5.5 12 12 5 5 300 V / 12 A 24 600 V / 16 A 24 kg 1 600 V / 16 A 17 ... 32 Other types on request mm, inches 47.7 1.88" 4.3 0.17" 44.7 1.76" 2CDC102029C0201 2CDC212003F0011 47.5 1.87" 1 0.04" Main dimensions 42.2 1.66" BC7-30-10-P BC6, BC7 3-pole interface mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: – – 3 main poles and one built-in auxiliary contact – – control circuit: DC operated – – low coil consumption (1.4 ... 2.4 W at pull-in and at holding) – – hum-free coil –– no auxiliary contact block permitted for mounting –– designed for soldering on PCB boards 45.2 1.78" 2CDC211030F0011 Description BC6, BC7 ABB | 3/27 KC6 4-pole interface mini contactor relays – with solderings pins DC operated 2CDC211023F0011 Description KC6-31Z-P-1.4 Ordering details Rated control circuit voltage UC Type Order code Pkg Weight qty (1 pce) V DC kg DC operation 24 V / 1.4 W 24 24 KC6-31Z-P-1.4-81 KC6-40E-P-1.4-81 GJH1213009R8311 GJH1213009R8401 10 10 0.170 0.170 DC operation 17 ... 32 V / 2.4 W 17 ... 32 17 ... 32 KC6-31Z-P-2.4-51 KC6-40E-P-2.4-51 GJH1213009R5311 GJH1213009R5401 10 10 0.170 0.170 Other types on request mm, inches 47.7 1.88" 3/28 | ABB 2CDC102032C0201 KC6 4.3 0.17" 44.7 1.76" 2CDC212003F0011 42.2 1.66" 47.5 1.87" 1 0.04" Main dimensions 45.2 1.78" 3 KC6 4-pole interface mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: – – 4-poles with various contact combinations – – control circuit: DC operated – – low coil consumption (3.5 W at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact block for side mounting –– designed for soldering on PCB boards B6, B7 3-pole mini contactors – with flat pin connection 4 to 5.5 kW AC operated IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control circuit 3-phase General voltage UC motor use rating rating 480 V 50 Hz 60 Hz hp B6 mini contactors 4 20 3 300 V / 12 A V AC V AC 24 24 42 42 48 48 220 … 240 220 … 240 380 … 415 380 … 415 B7 mini contactors 5.5 20 5 600 V / 16 A 24 24 42 42 48 48 Auxiliary Type contacts fitted Order code Pkg Weight qty (1 pce) kg 110 … 127 110 … 127 110 … 127 110 … 127 220 … 240 220 … 240 380 … 415 380 … 415 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 B6-30-10-F-01 B6-30-01-F-01 B6-30-10-F-02 B6-30-01-F-02 B6-30-10-F-03 B6-30-01-F-03 B6-30-10-F-84 B6-30-01-F-84 B6-30-10-F-80 B6-30-01-F-80 B6-30-10-F-85 B6-30-01-F-85 GJL1211003R0101 GJL1211003R0011 GJL1211003R0102 GJL1211003R0012 GJL1211003R0103 GJL1211003R0013 GJL1211003R8104 GJL1211003R8014 GJL1211003R8100 GJL1211003R8010 GJL1211003R8105 GJL1211003R8015 10 10 10 10 10 10 10 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 B7-30-10-F-01 B7-30-01-F-01 B7-30-10-F-02 B7-30-01-F-02 B7-30-10-F-03 B7-30-01-F-03 B7-30-10-F-84 B7-30-01-F-84 B7-30-10-F-80 B7-30-01-F-80 B7-30-10-F-85 B7-30-01-F-85 GJL1311003R0101 GJL1311003R0011 GJL1311003R0102 GJL1311003R0012 GJL1311003R0103 GJL1311003R0013 GJL1311003R8104 GJL1311003R8014 GJL1311003R8100 GJL1311003R8010 GJL1311003R8105 GJL1311003R8015 10 10 10 10 10 10 10 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 Other types on request 1.78" 1.66" 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 4.5 0.18" 1.72" 2CDC102033C0201 52.5 2CDC212002F0011 Main dimensions 2.26" B7-30-10-F 3 Ordering details 45.2 2CDC211031F0011 B6-30-10-F B6..F, B7..F 3-pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: – – flat pin connection for plug-in wiring and shake proven connection – – 3 main poles and one built-in auxiliary contact – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) –– hum-free coil –– add-on auxiliary contact blocks for side mounting –– designed for rail or wall mounting 57.5 2CDC211002F0010 Description B6, B7 ABB | 3/29 BC6, BC7 3-pole mini contactors – with flat pin connection 4 to 5.5 kW DC operated 2CDC211041F0011 Description BC6-30-10-F 2CDC211024F0011 BC7-30-10-F Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control 3-phase General circuit voltage UC motor use rating rating 480 V hp Auxiliary Type contacts fitted Order code Pkg Weight qty (1 pce) V DC BC6 mini contactors 4 20 3 300 V / 12 A kg 12 24 48 60 110 … 125 220 … 240 BC7 mini contactors 5.5 20 5 600 V / 16 A 12 24 48 60 110 … 125 220 … 240 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 BC6-30-10-F-07 BC6-30-01-F-07 BC6-30-10-F-01 BC6-30-01-F-01 BC6-30-10-F-16 BC6-30-01-F-16 BC6-30-10-F-03 BC6-30-01-F-03 BC6-30-10-F-04 BC6-30-01-F-04 BC6-30-10-F-05 BC6-30-01-F-05 GJL1213003R0107 GJL1213003R0017 GJL1213003R0101 GJL1213003R0011 GJL1213003R1106 GJL1213003R1016 GJL1213003R0103 GJL1213003R0013 GJL1213003R0104 GJL1213003R0014 GJL1213003R0105 GJL1213003R0015 10 10 10 10 10 10 10 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 BC7-30-10-F-07 BC7-30-01-F-07 BC7-30-10-F-01 BC7-30-01-F-01 BC7-30-10-F-16 BC7-30-01-F-16 BC7-30-10-F-03 BC7-30-01-F-03 BC7-30-10-F-04 BC7-30-01-F-04 BC7-30-10-F-05 BC7-30-01-F-05 GJL1313003R0107 GJL1313003R0017 GJL1313003R0101 GJL1313003R0011 GJL1313003R1106 GJL1313003R1016 GJL1313003R0103 GJL1313003R0013 GJL1313003R0104 GJL1313003R0014 GJL1313003R0105 GJL1313003R0015 10 10 10 10 10 10 10 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 Other types on request 2.26" 1.78" 1.66" 45.2 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 4.5 0.18" BC6, BC7 3/30 | ABB 1.72" 2CDC102034C0201 52.5 2CDC212002F0011 Main dimensions 57.5 3 BC6, BC7 3-pole mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: – – flat pin connection for plug-in wiring and shake proven connection – – 3 main poles and one built-in auxiliary contact – – control circuit: DC operated – – low coil consumption (3.5 W at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact blocks for side mounting –– designed for rail or wall mounting VB7 3-pole mini reversing contactors – with flat pin connection 4 to 5.5 kW AC operated 3 Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control circuit Auxiliary Type contacts 3-phase General voltage UC fitted motor use rating rating 480 V 50 Hz 60 Hz hp VB7 mini reversing contactors 5.5 20 5 600 V / 16 A V AC V AC 24 24 42 42 48 48 110 … 127 110 … 127 220 … 240 220 … 240 380 … 415 380 … 415 Order code Pkg Weight qty (1 pce) kg 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VB7-30-10-F-01 VB7-30-01-F-01 VB7-30-10-F-02 VB7-30-01-F-02 VB7-30-10-F-03 VB7-30-01-F-03 VB7-30-10-F-84 VB7-30-01-F-84 VB7-30-10-F-80 VB7-30-01-F-80 VB7-30-10-F-85 VB7-30-01-F-85 GJL1311903R0101 GJL1311903R0011 GJL1311903R0102 GJL1311903R0012 GJL1311903R0103 GJL1311903R0013 GJL1311903R8104 GJL1311903R8014 GJL1311903R8100 GJL1311903R8010 GJL1311903R8105 GJL1311903R8015 5 5 5 5 5 5 5 5 5 5 5 5 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 Other types on request Main dimensions mm, inches 46.7 1.84" 43.7 1.72" 2CDC102035C0201 4.5 0.18" 2CDC212006F0011 42.2 1.66" 96.2 3.79" 45.2 1.78" VB7-30-10-F VB7 3-pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: – – built-in mechanical interlock. The coils must be mutually interlocked electrically and coils must be deenergised for 50 ms at least to prevent phase to phase short circuit on the arc. – – flat pin connection for plug-in wiring and shake proven connection – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) – – hum-free coil –– no auxiliary contact block permitted for mounting –– for rail and wall mounting 57.5 2.26" 2CDC211005F0011 Description VB7 ABB | 3/31 VBC7 3-pole mini reversing contactors – with flat pin connection 4 to 5.5 kW DC operated 2CDC211004F0011 Description VBC7-30-10-F Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control Auxiliary Type 3-phase General circuit voltage contacts UC fitted motor use rating rating 480 V hp Order code Pkg Weight qty (1 pce) V DC VBC7 mini reversing contactors 5.5 20 5 600 V / 16 A 12 24 48 60 110 ... 125 220 … 240 kg 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 VBC7-30-10-F-07 VBC7-30-01-F-07 VBC7-30-10-F-01 VBC7-30-01-F-01 VBC7-30-10-F-16 VBC7-30-01-F-16 VBC7-30-10-F-03 VBC7-30-01-F-03 VBC7-30-10-F-04 VBC7-30-01-F-04 VBC7-30-10-F-05 VBC7-30-01-F-05 GJL1313903R0107 GJL1313903R0017 GJL1313903R0101 GJL1313903R0011 GJL1313903R1106 GJL1313903R1016 GJL1313903R0103 GJL1313903R0013 GJL1313903R0104 GJL1313903R0014 GJL1313903R0105 GJL1313903R0015 5 5 5 5 5 5 5 5 5 5 5 5 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 Other types on request Main dimensions mm, inches 46.7 1.84" 43.7 1.72" VBC7 3/32 | ABB 2CDC102036C0201 4.5 0.18" 2CDC212006F0011 42.2 1.66" 45.2 1.78" 96.2 3.79" 57.5 2.26" 3 VBC7 3-pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: – – built-in mechanical interlock. The coils must be mutually interlocked electrically and coils must be deenergised for 50 ms at least to prevent phase to phase short circuit on the arc – – flat pin connection for plug-in wiring and shake proven connection – – control circuit: DC operated – – low coil consumption (3.5 W at pull-in and at holding) – – hum-free coil –– no auxiliary contact block permitted for mounting –– for rail and wall mounting VB7A 3-pole mini reversing contactors – with flat pin connection 4 to 5.5 kW AC operated – with safety blocking function 3 Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control circuit Auxiliary Type contacts 3-phase General voltage UC fitted motor use rating rating 480 V 50 Hz 60 Hz hp V AC Order code V AC VB7A mini reversing contactors with safety blocking function 5.5 20 5 600 V / 24 24 1 16 A 0 42 42 1 0 48 48 1 0 110 … 127 110 … 127 1 0 220 … 240 220 … 240 1 0 380 … 415 380 … 415 1 0 Pkg Weight qty (1 pce) pce kg 0 1 0 1 0 1 0 1 0 1 0 1 VB7A-30-10-F-01 VB7A-30-01-F-01 VB7A-30-10-F-02 VB7A-30-01-F-02 VB7A-30-10-F-03 VB7A-30-01-F-03 VB7A-30-10-F-84 VB7A-30-01-F-84 VB7A-30-10-F-80 VB7A-30-01-F-80 VB7A-30-10-F-85 VB7A-30-01-F-85 GJL1311913R0101 GJL1311913R0011 GJL1311913R0102 GJL1311913R0012 GJL1311913R0103 GJL1311913R0013 GJL1311913R8104 GJL1311913R8014 GJL1311913R8100 GJL1311913R8010 GJL1311913R8105 GJL1311913R8015 5 5 5 5 5 5 5 5 5 5 5 5 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 Other types on request Main dimensions mm, inches 46.7 1.84" 43.7 1.72" 2CDC102037C0201 4.5 0.18" 2CDC212006F0011 42.2 1.66" 96.2 3.79" 45.2 1.78" VB7A-30-10-F VB7A 3-pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: – – built-in mechanical interlock and safety blocking function. The safety blocking function is triggered if the voltage is applied to the coil of the contactor to be switched on before the contactor to be switched off has dropped out. The contactor coils are designed for continuous operation when the contactor is de-energised i.e. the coil is not damaged if the mechanical interlock prevents switch-on of the contactor with the coil voltage applied. – – flat pin connection for plug-in wiring and shake proven connection – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) – – hum-free coil –– no auxiliary contact block permitted for mounting –– for rail and wall mounting 57.5 2.26" 2CDC211003F0011 Description VB7A ABB | 3/33 VBC7A 3-pole mini reversing contactors – with flat pin connection 4 to 5.5 kW DC operated – with safety blocking function 2CDC211002F0011 Description VBC7A-30-10-F Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control Auxiliary Type 3-phase General circuit voltage contacts UC fitted motor use rating rating 480 V hp Order code Pkg Weight qty (1 pce) V DC kg VBC7A mini reversing contactors with safety blocking function 5.5 20 5 600 V / 12 1 0 VBC7A-30-10-F-07 16 A 0 1 VBC7A-30-01-F-07 24 1 0 VBC7A-30-10-F-01 0 1 VBC7A-30-01-F-01 48 1 0 VBC7A-30-10-F-16 0 1 VBC7A-30-01-F-16 60 1 0 VBC7A-30-10-F-03 0 1 VBC7A-30-01-F-03 110 ... 125 1 0 VBC7A-30-10-F-04 0 1 VBC7A-30-01-F-04 220 … 240 1 0 VBC7A-30-10-F-05 0 1 VBC7A-30-01-F-05 GJL1313913R0107 GJL1313913R0017 GJL1313913R0101 GJL1313913R0011 GJL1313913R1106 GJL1313913R1016 GJL1313913R0103 GJL1313913R0013 GJL1313913R0104 GJL1313913R0014 GJL1313913R0105 GJL1313913R0015 5 5 5 5 5 5 5 5 5 5 5 5 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 0.345 Other types on request Main dimensions mm, inches 46.7 1.84" 43.7 1.72" VBC7A 3/34 | ABB 2CDC102038C0201 4.5 0.18" 2CDC212006F0011 42.2 1.66" 45.2 1.78" 96.2 3.79" 57.5 2.26" 3 VBC7A 3-pole compact design reversing contactors are space optimized control products mainly used for switching resistive or motor loads up to 690 V AC. These reversing contactors are designed with: – – built-in mechanical interlock and safety blocking function. The safety blocking function is triggered if the voltage is applied to the coil of the contactor to be switched on before the contactor to be switched off has dropped out. The contactor coils are designed for continuous operation when the contactor is de-energised i.e. the coil is not damaged if the mechanical interlock prevents switch-on of the contactor with the coil voltage applied. – – flat pin connection for plug-in wiring and shake proven connection – – control circuit: DC operated – – low coil consumption (3.5 W at pull-in and at holding) – – hum-free coil –– no auxiliary contact block permitted for mounting –– for rail and wall mounting BC6, BC7 3-pole interface mini contactors – with flat pin connection 4 to 5.5 kW DC operated IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL/CSA Rated control Auxiliary Type 3-phase General circuit voltage contacts UC fitted motor use rating rating 480 V hp 5.5 20 5 300 V / 12 A 24 600 V / 16 A 24 DC operation 17 … 32 V / 2.4 W 4 20 3 300 V / 12 A 17 ... 32 5.5 17 ... 32 20 Order code Pkg Weight qty (1 pce) V DC DC operation 24 V / 1.4 W 4 20 3 5 600 V / 16 A kg 1 0 1 0 0 1 0 1 BC6-30-10-F-1.4-81 BC6-30-01-F-1.4-81 BC7-30-10-F-1.4-81 BC7-30-01-F-1.4-81 GJL1213003R8101 GJL1213003R8011 GJL1313003R8101 GJL1313003R8011 10 10 10 10 0.170 0.170 0.170 0.170 1 0 1 0 0 1 0 1 BC6-30-10-F-2.4-51 BC6-30-01-F-2.4-51 BC7-30-10-F-2.4-51 BC7-30-01-F-2.4-51 GJL1213003R5101 GJL1213003R5011 GJL1313003R5101 GJL1313003R5011 10 10 10 10 0.170 0.170 0.170 0.170 Other types on request 1.78" 1.66" 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 4.5 0.18" 1.72" 2CDC102039C0201 52.5 2CDC212002F0011 Main dimensions 2.26" BC7-30-10-F 3 Ordering details 45.2 2CDC211024F0011 BC6-30-10-F BC6, BC7 3-pole interface mini contactors are compact control products mainly used for switching resistive or motor loads up to 690 V AC. These contactors are designed with: – – flat pin connection for plug-in wiring and shake proven connection – – 3 main poles and one built-in auxiliary contact – – control circuit: DC operated – – low coil consumption (1.4 ... 2.4 W at pull-in and at holding) – – hum-free coil –– no auxiliary contact block permitted for mounting –– designed for rail or wall mounting 57.5 2CDC211041F0011 Description BC6, BC7 ABB | 3/35 K6 4-pole mini contactor relays – with flat pin connection AC operated 2CDC211034S0011 Description K6-22Z-F Ordering details Rated control circuit voltage UC Type 50 Hz 60 Hz V AC V AC Order code Pkg Weight qty (1 pce) kg K6 4-pole mini contactor relays 24 24 42 42 48 48 110 ...127 110 ...127 220 ... 240 220 ... 240 380 ... 415 380 ... 415 24 24 42 42 48 48 110 ...127 110 ...127 220 ... 240 220 ... 240 380 ... 415 380 ... 415 24 24 42 42 48 48 110 ...127 110 ...127 220 ... 240 220 ... 240 380 ... 415 380 ... 415 K6-22Z-F-01 K6-22Z-F-02 K6-22Z-F-03 K6-22Z-F-84 K6-22Z-F-80 K6-22Z-F-85 K6-31Z-F-01 K6-31Z-F-02 K6-31Z-F-03 K6-31Z-F-84 K6-31Z-F-80 K6-31Z-F-85 K6-40E-F-01 K6-40E-F-02 K6-40E-F-03 K6-40E-F-84 K6-40E-F-80 K6-40E-F-85 GJH1211003R0221 GJH1211003R0222 GJH1211003R0223 GJH1211003R8224 GJH1211003R8220 GJH1211003R8225 GJH1211003R0311 GJH1211003R0312 GJH1211003R0313 GJH1211003R8314 GJH1211003R8310 GJH1211003R8315 GJH1211003R0401 GJH1211003R0402 GJH1211003R0403 GJH1211003R8404 GJH1211003R8400 GJH1211003R8405 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 Other types on request 2.26" 1.78" 1.66" 45.2 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 4.5 0.18" K6 3/36 | ABB 1.72" 2CDC102040C0201 52.5 2CDC212002F0011 Main dimensions 57.5 3 K6 4-pole mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: – – flat pin connection for plug-in wiring and shake proven connection – – 4-poles with various contact combinations – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact blocks for side mounting –– for rail and wall mounting –– add-on auxiliary contact blocks for side mounting KC6 4-pole mini contactor relays – with flat pin connection DC operated 3 Ordering details Rated control circuit voltage UC Type Order code Pkg Weight qty (1 pce) V DC kg K6 4-pole mini contactor relays 12 24 48 110 ... 125 220 ... 240 12 24 48 110 ... 125 220 ... 240 24 48 110 ... 125 220 ... 240 KC6-22Z-F-07 KC6-22Z-F-01 KC6-22Z-F-16 KC6-22Z-F-04 KC6-22Z-F-05 KC6-31Z-F-07 KC6-31Z-F-01 KC6-31Z-F-16 KC6-31Z-F-04 KC6-31Z-F-05 KC6-40E-F-01 KC6-40E-F-16 KC6-40E-F-04 KC6-40E-F-05 GJH1213003R0227 GJH1213003R0221 GJH1213003R1226 GJH1213003R0224 GJH1213003R0225 GJH1213003R0317 GJH1213003R0311 GJH1213003R1316 GJH1213003R0314 GJH1213003R0315 GJH1213003R0401 GJH1213003R1406 GJH1213003R0404 GJH1213003R0405 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 0.170 Other types on request 2.26" 1.78" 1.66" 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 4.5 0.18" 1.72" 2CDC102041C0201 52.5 2CDC212002F0011 Main dimensions 45.2 KC6-22Z-F-01 K6 4-pole mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: – – flat pin connection for plug-in wiring and shake proven connection – – 4-poles with various contact combinations – – control circuit: AC operated – – low coil consumption (3.5 VA at pull-in and at holding) – – hum-free coil –– add-on auxiliary contact blocks for side mounting –– for rail and wall mounting 57.5 2CDC211029F0011 Description KC6 ABB | 3/37 KC6 4-pole interface mini contactor relays – with flat pin connection DC operated 2CDC211033F0011 Description KC6-31Z-F-05 Ordering details Rated control circuit voltage UC Type Order code Pkg Weight qty (1 pce) V DC kg DC operation 24 V / 1.4 W 24 24 KC6-31Z-F-1.4-81 KC6-40E-F-1.4-81 GJH1213003R8311 GJH1213003R8401 10 10 0.170 0.170 DC operation 17 ... 32 V / 2.4 W 17 ... 32 17 ... 32 KC6-31Z-F-51 KC6-40E-F-51 GJH1213003R5311 GJH1213003R5401 10 10 0.170 0.170 Other types on request 2.26" 1.78" 1.66" 45.2 42.2 47.5 mm, inches 2.07" 1.87" 46.7 1.84" 43.7 4.5 0.18" KC6 3/38 | ABB 1.72" 2CDC102045C0201 52.5 2CDC212002F0011 Main dimensions 57.5 3 KC6 4-pole interface mini-contactor relays are space optimized control products mainly used for control functions or for small loads up to 4 A. These contactors are designed with: – – flat pin connection for plug-in wiring and shake proven connection – – 4-poles with various contact combinations – – control circuit: AC operated – – low coil consumption (1.4 ... 2.4 W at pull-in and at holding) – – hum-free coil –– no auxiliary contact block permitted for mounting –– for rail and wall mounting –– no add-on auxiliary contact blocks possible B6, B7, BC6, BC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3-pole mini reversing contactors Accessories 2CDC211012F0010 Ordering details Suitable for Auxiliary Type contacts Order code Pkg Weight qty (1 pce) kg 2CDC211007F0010 CAF6-11N 2CDC211008F0010 RV-BC6/250 2CDC211018F0011 CA6-11E Front mounted instantaneous auxiliary contact blocks (not allowed for mounting on TBC, B6S, B7S, interface contactors) 1) B6-, B7-40-00, BC6-, BC7-40-00 1 1 CAF6-11E GJL1201330R0002 10 VB6, VB7, VBC6, VBC7, VB6A, VB7A 2 0 CAF6-20E GJL1201330R0006 10 VBC6A, VBC7A 0 2 CAF6-02E GJL1201330R0010 10 1 1 CAF6-11M GJL1201330R0003 10 B6-, B7-30-10, BC6-, BC7-30-10 VB6, VB7, VBC6, VBC7, VB6A, VB7A 2 0 CAF6-20M GJL1201330R0007 10 VBC6A, VBC7A 0 2 CAF6-02M GJL1201330R0011 10 1 1 CAF6-11N GJL1201330R0004 10 B6-, B7-30-01, BC6-, BC7-30-01 VB6, VB7, VBC6, VBC7, VB6A, VB7A 2 0 CAF6-20N GJL1201330R0008 10 VBC6A, VBC7A 0 2 CAF6-02N GJL1201330R0012 10 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.020 Side mounted instantaneous auxiliary contact block 1) B6-, B7-40-00, BC6-, BC7-40-00 B6-, B7-30-10, BC6-, BC7-30-10 B6-, B7-30-01, BC6-, BC7-30-01 GJL1201317R0002 GJL1201317R0003 GJL1201317R0004 10 10 10 0.030 0.030 0.030 Side mounted instantaneous auxiliary contact block with soldering pins 2) B6-, B7-40-00-P, BC6-,BC7-40-00-P 1 1 CA6-11E-P B6-, B7-30-10-P, BC6-, BC7-30-10-P 1 1 CA6-11M-P B6-, B7-30-01-P, BC6-, BC7-30-01-P 1 1 CA6-11N-P GJL1201319R0002 GJL1201319R0003 GJL1201319R0004 10 10 10 0.025 0.025 0.025 Side mounted instantaneous auxiliary contact block with flat pin connection 2) B6-, B7-40-00-F, BC6-,BC7-40-00-F 1 1 CA6-11E-F B6-, B7-30-10-F, BC6-, BC7-30-10-F 1 1 CA6-11M-F B6-, B7-30-01-F, BC6-, BC7-30-01-F 1 1 CA6-11N-F GJL1201318R0002 GJL1201318R0003 GJL1201318R0004 10 10 10 0.025 0.025 0.025 Soldering receptacle (Ith = 10 A, AC-3: 500 V / 8 A, 690 V / 3.5 A, UL: 300 V / 8 A) B6, B7, BC6, BC7 LB6 2-pole aux.contact blocks CA LB6-CA GJL1201902R0001 GJL1201903R0001 10 10 0.020 0.010 1) CA6-11E-P Rated control circuit voltage UC V DC CA6-11E CA6-11M CA6-11N Connection type Type Order code Pkg Weight qty (1 pce) kg Cable lug Flat pin, 2.8 mm Cable lug Flat pin, 2.8 mm Cable lug Flat pin, 2.8 mm RV-BC6/60 RV-BC6-F/60 RV-BC6/250 RV-BC6-F/250 RV-BC6/380 RV-BC6-F/380 GHV2501902R0002 GHV2501902R0003 GHV2501903R0002 GHV2501903R0003 GHV2501904R0002 GHV2501904R0003 10 10 10 10 10 10 0.005 0.005 0.005 0.010 0.005 0.010 BEA7/132 BEA7/325 1SBN080906R1002 1SBN080906R1001 10 10 0.013 0.021 BSM6-30 GJL1201908R0001 10 0.010 Parallel connecting link B6, B7, BC6, BC7 LP6 GJL1201907R0001 100 0.009 Cover cap, transparent fitting to DIN rail design, sealable B6, B7, BC6, BC7 LT6-B GJL1201906R0001 10 0.015 Plastic label for markings B6, B7, BC6, BC7 BA5-50 1SBN110000R1000 50 0.020 1 0.100 Surge suppressors for contactor coils BC6, BC7 24 ... 60 2CDC211020F0011 1 1 1 CA6 and CAF6 must not be fitted simultaneously. Suitable for CA6-11E-F 1 1 1 3 50 ... 250 380 Connecting links with manual motor starters To connect B..VB.. mini contactor to MS116, MS132 To connect B..VB.. mini contactors to MS325 Connection sets for reversing contactors VB6, VB7, VBC6, VBC7, VB6A, VB7A, VBC6A, VBC7A, cross-section 1.8 mm² 2CDC231012F0011 BSM6-30 Thermal overload relays T16 (see page 2CDC106036C0201) T16-16 ABB | 3/39 2CDC102042C0201 SST27792R Note: Mini contactors for AC operation have an integrated protective circuit K6, KC6 4-pole mini contactor relays Accessories 2CDC211019F0011 Ordering details CAF6-11K 2CDC211009F0010 3 CA6-11K Suitable for Auxiliary Type contacts kg 1 0 2 CAF6-11K CAF6-20K CAF6-02K GJL1201330R0001 GJL1201330R0005 GJL1201330R0009 10 10 10 0.020 0.020 0.020 Side mounted instantaneous auxiliary contact block 1) K6, KC6 1 CA6-11K GJL1201317R0001 10 0.030 GJL1201319R0001 10 0.025 GJL1201318R0001 10 0.025 LB6 LB6-CA GJL1201902R0001 GJL1201903R0001 10 10 0.020 0.010 Type Order code Pkg Weight qty (1 pce) 1 Side mounted instantaneous auxiliary contact block with soldering pins 2) K6..P, KC6..P 1 1 CA6-11K-P Side mounted instantaneous auxiliary contact block with flat pin connection K6..F, KC6..F 1 1 CA6-11K-F 1) 2) CA6 and CAF6 must not be fitted simultaneously. Suitable for 2CDC211011F0010 Pkg Weight qty (1 pce) Front mounted instantaneous auxiliary contact blocks 1) K6, KC6 1 2 0 Soldering receptacle ( Ie < 8 A ) K6, KC6 2-pole auxiliary contact blocks CA CA6-11K-P Order code Rated control circuit voltage UC V DC Surge suppressors for contactor coils KC6 24 ... 60 50 ... 250 380 Connection type kg Cable lug Flat pin, 2.8 mm Cable lug Flat pin, 2.8 mm Cable lug Flat pin, 2.8 mm RV-BC6/60 RV-BC6-F/60 RV-BC6/250 RV-BC6-F/250 RV-BC6/380 RV-BC6-F/380 GHV2501902R0002 GHV2501902R0003 GHV2501903R0002 GHV2501903R0003 GHV2501904R0002 GHV2501904R0003 10 10 10 10 10 10 0.005 0.005 0.005 0.010 0.005 0.010 GJL1201906R0001 10 0.015 2CDC211010F0010 Note: Mini contactors for AC operation have an integrated protective circuit Cover cap, transparent fitting to DIN rail design, sealable K6, KC6 LT6-B 2CDC211006F0010 CA6-11K-F RV-BC6/250 3/40 | ABB 2CDC102042C0201 2CDC211007F0010 LT6-B B6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data Main pole – Utilization characteristics according to IEC Contactor types AC operated DC operated Standards Rated operational voltage Ue max Rated frequency (without derating) Conventional free-air thermal current lth acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C, with conductor cross-sectional area AC-1 Utilization category for air temperature close to contactor θ ≤ 40 °C Ie / Rated operational current AC-1 Ue max ≤ 690 V, 50/60 Hz 220-230-240 V 380-400 V 440 V 500 V 690 V AC-1 Utilization category for air temperature close to contactor θ ≤ 55 °C Ie / Rated operational current AC-1 Ue max ≤ 690 V, 50/60 Hz 220-230-240 V 380-400 V 440 V 500 V 690 V B6, VB6, VB6A BC6, VBC6, VBC6A IEC/EN 60947-1, IEC/EN 60947-4-1 690 V AC DC or 50 / 60 Hz Screw terminal types: 20 A Flat pin types: 20 A Soldering pin types: 12 A B7, VB7, VB7A BC7, TBC7, VBC7, VBC7A 3 Screw terminal types: 20 A Flat pin types: 20 A Soldering pin types: 12 A Screw terminal types: 20 A Flat pin types: 20 A Soldering pin types: 12 A Screw terminal types: 20 A Flat pin types: 20 A Soldering pin types: 12 A 12 A 6A Screw terminal types: 16 A Flat pin types: 16 A Soldering pin types: 12 A Screw terminal types: 16 A Flat pin types: 16 A Soldering pin types: 12 A Screw terminal types: 16 A Flat pin types: 16 A Soldering pin types: 12 A 12 A 6A AC-3 Utilization category for air temperature close to contactor θ ≤ 55 °C Ie / Rated operational current AC-3 220 / 230 / 240 V 380 / 400 V 3-phase motors 440 V M 3 500 V 690 V Rated operational power AC-3 220-230-240 V 380-400 V 1500 r.p.m. 50 Hz 1800 r.p.m. 60 Hz 3-phase motors 440 V 500 V M 3 690 V DC-1 Utilization category for air temperature close to contactor θ ≤ 55 °C Ie / Rated operational current DC-1 DC-3 Utilization category for air temperature close to contactor θ ≤ 55 °C Ie / Rated operational current DC-3 DC-5 Utilization category for air temperature close to contactor θ ≤ 55 °C Ie / Rated operational current DC-5 11.8 / 11.3 / 10.8 A 12.1 / 11.5 A 10.1 A 9.2 A 3.8 A 3 kW 5.5 kW 5.5 kW 5.5 kW 3 kW 110 V 220 V - 4A 0.6 A 110 V 220 V - 1.5 A 0.25 A 110 V 220 V 10 x Ie AC-3 acc. to IEC 60947-4-1 8 x Ie AC-3 acc. to IEC 60947-4-1 0.4 A 0.2 A Type 1: 25 A / Type 2: 25 A 64 A 64 A AC-1 300 cycles/h AC-3 600 cycles/h DC-1, DC-3, DC-5 600 cycles/h 10 s at 400 V 96 A 96 A 2CDC102043C0201 Rated making capacity AC-3 Rated breaking capacity AC-3 Short-circuit protection device for contactors without thermal O/L relay - motor protection excluded Ue ≤ 500 V AC - fuse type gG Rated short-time withstand current ICW at 40 °C ambient temperature, in free air from a cold state Maximum breaking capacity cos ϕ = 0.45 Maximum electrical switching frequency 8.9 / 8.5 / 8.1 A 8.9 / 8.5 A 7.4 A 6.8 A 3.8 A 2.2 kW 4 kW 4 kW 4 kW 3 kW ABB | 3/41 B6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data Main pole – Utilization characteristics according to UL/NEMA/CSA Contactor types Standards Maximum operational voltage UL/CSA general use rating UL/CSA maximum 1-phase motor rating Full load current 120 V AC 240 V AC 120 V AC 240 V AC Horse power rating UL/CSA maximum 3-phase motor rating Full load current 1) Horse power rating 1) Resistive Heating Incandescent Lamps Fluorescent Lamps Short-circuit protection device for contactors without thermal overload relay - motor protection excluded Fuse rating Fuse type, 600 V Maximum electrical switching frequency For resitive loads AC-1 For motor loads AC-3 1) 200 / 208 V AC 220-240 V AC 440-480 V AC 550-600 V AC 200 / 208 V AC 220-240 V AC 440-480 V AC 550-600 V AC 300 V per pole 300 V per pole 300 V per pole 600 V 600 V B6, VB6, VB6A BC6, VBC6, VBC6A UL 508, CSA C22.2 N°14 600 V 12 A / 300 V B7, VB7, VB7A BC7, TBC7, VBC7, VBC7A 16 A / 600 V 5.8 A 4.9 A 0.25 hp 0.5 hp 13.8 A 10.0 A 0.75 hp 1.5 hp 4.8 / 4.6 A 6.8 A 4.8 A 1.7 A 1 hp 2 hp 3 hp 1 hp 8A 6A 8.4 A 7.8 / 10.6 A 9.6 A 7.6 A 6.1 A 2 / 3 hp 3 hp 5 hp 5 hp 8A 6A 8.4 A 40 A Class J 300 cycles/h 600 cycles/h For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". General technical data Contactor types AC operated DC operated Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL/CSA Rated impulse withstand voltage Uimp Ambient air temperature, close to contactor Operation Fitted with thermal overload relay Without thermal overload relay Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Resistance to shock acc. IEC 60068-2-27 and EN 60068-2-27 acc. to IEC/EN 60947-1 Annex. Q Resistance to vibrations acc. IEC 60068-2-27 and EN 60068-2-27 acc. to IEC/EN 60947-1 Annex. Q B6, VB6, VB6A BC6, VBC6, VBC6A B7, VB7, VB7A BC7, TBC7, VBC7, VBC7A 690 V 600 V 6 kV -25 ... +50 °C -25 ... +55 °C -40 ... +80 °C Acc. to IEC 60947-1 Annex Q 2000 m 107 operating cycles Half-sine 15 g / 11 ms Category E Sinusoidal 5 g / 3 ... 150 Hz Category E 2CDC102043C0201 3 AC operated DC operated 3/42 | ABB B6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data Magnet system characteristics for B6, B7 contactors Contactor types Coil operating limits acc. to IEC 60947-4-1 AC control voltage Rated control circuit voltage UC Coil consumption AC operated AC supply Average pull-in value Average holding value Drop-out voltage B6, VB6 0.85 ... 1.1 x Uc B7, VB7 See ordering tables 3.5 VA / 3.5 W 3.5 VA / 3.5 W 0.20 ... 0.75 % of Uc 3 Magnet system characteristics for BC6, BC7 contactors Contactor types Coil operating limits acc. to IEC 60947-4-1 AC control voltage Rated control circuit voltage UC Coil consumption 1) DC operated DC supply Average pull-in value Average holding value Drop-out voltage in % of UC min 1) BC6, VBC6 0.85 ... 1.1 x Uc BC7, VBC7 See ordering tables 3.5 VA / 3.5 W 3.5 VA / 3.5 W 0.10 ... 0.75 x UC Interface mini-contactors: see coil consumption on ordering details pages Magnet system characteristics for TBC7 contactors Contactor types Coil operating limits acc. to IEC 60947-4-1 AC control voltage Rated control circuit voltage UC Coil consumption DC operated DC supply Average pull-in value Average holding value Drop-out voltage in % of UC min TBC7 Wide range voltage supply see ordering tables, UCmin ... UCmax See ordering tables 5 VA / 5 W 5 VA / 5 W ≤ 0.20 % of UCmin Mounting characteristics and conditions for use Contactor types AC operated DC operated B6, VB6, VB6A BC6, VBC6, VBC6A Mounting positions B7, VB7, VB7A BC7, TBC7, VBC7, VBC7A Pos. 2 + 30° - 30° Pos. 4 Pos. 3 Pos. 1 Pos. 5 Pos. 6 The contactors can be assembled side by side 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally 2CDC102043C0201 Mounting distances Fixing On rail acc. to IEC 60715, EN 60715 By screws (not supplied) Pos. 1 ± 30° ABB | 3/43 B6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data Auxiliary contacts for front mounting, side mounting and built-in according to IEC 24 V 50/60 Hz 110-120 V 50/60 Hz 220-230-240 V 50/60 Hz 380-400 V 50/60 Hz 440 V 50/60 Hz Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 24 V DC 110 V DC 220 - 240 V DC Short-circuit protection device Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Maximum electrical switching frequency AC-15 DC-13 CA6, CAF6, built-in auxiliary contacts IEC/EN 60947-1, IEC/EN 60947-4-1 690 V DC or 50 / 60 Hz 6A 4A 4A 4A 3A 3A 2.5 A 0.7 A 0.4 A 6 A, Type gG 17 V / 5 mA 600 cycles/h 600 cycles/h Auxiliary contacts for front mounting, side mounting and built-in according to UL/CSA Types Max. operational voltage Pilot duty AC thermal rated current CA6, CAF6, built-in auxiliary contacts 600 V AC A600 5A Accessories for mini contactors MO132 MS132 RV-BC6 MS116 BEA7 B7 B6 CAF6 CA6 RV-BC6 RV-BC6 T16 RV-BC6 3/44 | ABB 2CDC102043C0201 E16DU 2CDC212018F0011 3 Types Standards Rated operational voltage Ue max Rated frequency (without derating) Conventional free-air thermal current lth θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 B6, B7, BC6, BC7, TBC7 3- and 4-pole mini contactors VB6, VB7, VBC6, VBC7 3- and 4-pole mini reversing contactors Technical data Connection characteristics Contactor types AC operated DC operated B6, VB6, VB6A BC6, VBC6, VBC6A B7, VB7, VB7A BC7, TBC7, VBC7, VBC7A Main terminals 1) Screw terminals with cable clamp Connection capacity Main conductors (poles) Rigid: solid Flexible without ferrule Connection capacity acc. to UL/CSA Stripping length Tightening torques Connection capacity – auxiliary conductors (built-in auxiliary terminals + coil terminals) Rigid: solid Flexible without ferrule Connection capacity acc. to UL/CSA Stripping length Tightening torques Coil terminals Built-in auxiliary terminals Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Main terminals Coil terminals Built-in auxiliary terminals Screw terminals All terminals Screwdriver type 1 or 2 x 1 ... 4 mm² 1 or 2 x 1 ... 2.5 mm² 1 or 2 x AWG 22 ... 10 9 mm 0.8 ... 1.1 Nm / 7 lb.in 0.8 ... 1.1 Nm / 7 lb.in IP20 IP20 IP20 (Delivered in open position, screws of unused terminals must be tightened) M3 Flat Ø 5.5 mm / Pozidriv 1 Soldering pin connection acc. to DIN 40801: 0.8 x 1 mm / 0.8 x 2.54 mm Flat pin connection acc. to DIN 46248: 1 x 6.3 mm / 1 x 2.8 mm 2CDC102043C0201 1) 3 1 or 2 x 1 ... 4 mm² 1 or 2 x 1 ... 2.5 mm² 1 or 2 x AWG 22 ... 10 9 mm 0.8 ... 1.1 Nm / 7 lb.in ABB | 3/45 K6, KC6, TKC6 4-pole mini contactor relays Technical data Main pole – Utilization characteristics according to IEC Contactor types 24 V 50/60 Hz 110-120 V 50/60 Hz 220-230-240 V 50/60 Hz 380-400 V 50/60 Hz 440 V 50/60 Hz 480-500 V 50/60 Hz Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 Short-circuit protection device for contactors Ue ≤ 500 V AC, fuse type gG Minimum switching capacity Maximum electrical switching frequency 24 V DC 110 V DC 220-240 V DC AC-15 DC-13 K6 KC6, TKC6 IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1 690 V DC or 50 / 60 Hz 6A 4A 4A 4A 3A 3A 2A 2.5 A 0.7 A 0.4 A 6A 17 V / 5 mA 600 cycles/h 600 cycles/h Main pole – Utilization characteristics according to UL/NEMA/CSA Contactor types Standards Maximum operational voltage Pilot duty AC operated DC operated K6 KC6, TKC6 UL 508, CSA C22.2 No14 600 V AC A600 2CDC102043C0201 3 Standards Rated operational voltage Uemax Rated frequency (without derating) Conventional free-air thermal current lth θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 AC operated DC operated 3/46 | ABB K6, KC6, TKC6 4-pole mini contactor relays Technical data General technical data Contactor relay types Rated insulation voltage Ui acc. to IEC 60947-5-1 acc. to UL/CSA Rated impulse withstand voltage Uimp Electromagnetic compatibility Ambient air temperature close to contactor relay AC operated DC operated K6 KC6, TKC6 690 V 600 V 6 kV Operation in free air Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Resistance to shock acc. IEC 60068-2-27 and EN 60068-2-27 acc. to IEC/EN 60947-1 Annex. Q Resistance to vibrations acc. IEC 60068-2-27 and EN 60068-2-27 acc. to IEC/EN 60947-1 Annex. Q 3 -25 ... +55 °C -40 ... +80 °C Acc. to IEC 60068-2-30 2000 m 107 operating cycles Half-sine 15 g / 11ms Category E Sinusoidal 5 g / 3 ... 150 Hz Category E Magnet system characteristics for K6 contactor relays Contactor relay types Coil operating limits acc. to IEC 60947-4-1 AC control voltage Coil consumption Average pull-in value Average holding value Drop-out voltage in % of UC min. AC operated AC supply K6 0.85 ... 1.1 x UC 3.5 VA / 3.5 W 3.5 VA / 3.5 W Approx. 20 ... 75% Contactor relay types Coil operating limits acc. to IEC 60947-5-1 DC control voltage Coil consumption Average pull-in value Average holding value Drop-out voltage in % of UC min. DC operated DC supply KC6 0.85 ... 1.1 x UC TKC6 See ordering details 3.5 VA / 3.5 W 3.5 VA / 3.5 W 10 ... 75 % 5 VA / 5 W 5 VA / 5 W 10 ... 75 % 2CDC102043C0201 Magnet system characteristics for KC6, TKC6 contactor relays ABB | 3/47 K6, KC6, TKC6 4-pole mini contactor relays Technical data Mounting characteristics and conditions for use Contactor types AC operated DC operated K6 KC6, TKC6 Mounting positions Pos. 2 + 30° - 30° Pos. 4 3 Pos. 3 Pos. 1 Pos. 1 ± 30° Pos. 5 Pos. 6 The contactors can be assembled side by side. Mounting distances Fixing On rail acc. to IEC 60715, EN 60715 By screws (not supplied) 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally Connecting characteristics Contactor relay types AC operated DC operated K6 KC6, TKC6 Main terminals 1) Screw terminals with cable clamp Connection capacity Main conductors (poles) Rigid: solid Flexible without ferrule Connection apacity acc. to UL/CSA Stripping length Tightening torques Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 All Screw terminals All terminals Screwdriver type IP20 (Delivered in open position, screws of unused terminals must be tightened) M3 Flat Ø 5.5 / Pozidriv 1 Soldering pin connection acc. to DIN 40801: 0.8 x 1 mm / 0.8 x 2.54 mm Flat pin connection acc. to DIN 46248: 1 x 6.3 mm / 1 x 2.8 mm 2CDC102043C0201 1) 1 or 2 x 1 ... 4 mm² 1 or 2 x 1 ... 2.5 mm² 1 or 2 x AWG 22 ... 10 9 mm 0.8 ... 1.1 Nm / 7 lb.in 3/48 | ABB 5 7 A1 2 4 6 8 A2 3 5 13 A1 2 4 6 14 A2 B6(7)-30-10 ... BC6(7)-30-10 ... 3 R5 R7 A1 2 4 R6 R8 A2 B6(7)-22-00 ... BC6(7)-22-00 ... 3 5 R7 A1 2 4 6 R8 A2 3 5 1 3 5 21 A1 A2 22 2 4 6 2 4 6 22 A2 3 5 1 3 5 13 A1 A2 14 2 4 6 2 4 6 14 A2 3 2CDC212009F0012 2CDC212008F0012 14 44 22 32 A2 2CDC212010F0012 13 43 21 31 A1 14 34 44 22 A2 K6-22Z ... KC6-22Z ... K6S-22Z ... K6-31Z ... KC6-31Z ... K6S-31Z ... 14 53 54 31 32 61 62 4 6 8 1 3 5 13 ➟ 2 4 6 14 1 3 5 21 ➟ 2 4 6 40 E ➟ 31 Z 22 Z 22 B(C)6(7)-30-10 B(C)6(7)-30-10-F B(C)6(7)-30-10-P B(C)6(7)-30-01 B(C)6(7)-30-01-F B(C)6(7)-30-01-P K(C)6 ..... K(C)6 ....-F K(C)6 ....-P B(C)6(7)-40-00 B(C)6(7)-30-10 B(C)6(7)-30-01 K(C)6 ..... 1 3 5 7 13 21 13 23 11 21 14 22 14 24 12 22 CAF 6 2 4 1 3 6 8 5 13 1 2 3 33 21 23 33 21 31 34 22 24 34 22 32 CAF 6 2 4 1 3 6 14 5 21 1 2 3 13 31 13 33 11 31 14 32 14 34 12 32 CAF 6 2 4 6 40 E 22 1 2 3 53 61 53 63 51 61 54 62 54 64 52 62 2 3 31 Z 22 Z 1 1 = CAF6-11E 2 = CAF6-20E 3 = CAF6-02E 1 = CAF6-11M 2 = CAF6-20M 3 = CAF6-02M 1 = CAF6-11N 2 = CAF6-20N 3 = CAF6-02N 1 = CAF6-11K 2 = CAF6-20K 3 = CAF6-02K 2CDC212015F0012 2 B(C)6(7)-40-00 B(C)6(7)-40-00-F B(C)6(7)-40-00-P 2CDC212016F0012 7 2CDC102043C0201 13 22 5 2CDC212017F0012 34 21 3 2CDC212018F0012 33 22 1 ➟ 2CDC212011F0012 14 21 2CDC212012F0012 13 2CDC212013F0012 CAF... 2CDC212014F0012 CA6... CA6-11K CA6-11K-F CA6-11K-P 6 22 A2 A1 13 1 13 33 43 21 A1 K6-40E ... KC6-40E ... CA6-11N CA6-11N-F CA6-11N-P 4 VB6(7)-30-10 ... VBC6(7)-30-10 ... 13 23 33 43 A1 CA6-11M CA6-11M-F CA6-11M-P 2 2CDC212007F0012 A1 21 1 CA6-11E CA6-11E-F CA6-11E-P 5 21 A1 B6(7)-31-00 ... BC6(7)-31-00 ... 14 24 34 44 A2 Auxiliary switches 3 B6(7)-30-01 ... BC6(7)-30-01 ... 1 VB6(7)-30-01 ... VBC6(7)-30-01 ... Mini contactor relays 1 2CDC212005F0012 1 2CDC212004F0012 B6(7)-40-00 ... BC6(7)-40-00 ... Compact reversing contactors 1 2CDC212003F0012 3 2CDC212002F0012 1 2CDC212006F0012 Mini contactors 2CDC212001F0012 Mini contactors Location of the connection terminals and terminal designation ABB | 3/49 Summary_4 4 4/0 | ABB AS contactors and NS contactor relays with screw terminals Overview 4/2 Motor starting solutions - open type version, in kit form with screw terminals 4/5 3-pole contactors and contactor relays with screw terminals 4/29 4 4/84 Summary_4 Voltage code table ABB | 4/1 Compact Optimize your equipment dimensions! One frame size for contactors up to 7.5 kW - 400 V Same dimensions for AC and DC operated contactors with screw or spring terminals 4 Reversing contactors including mechanical and electrical interlocking without additional width Direct control by PLC removing any use of interface relay and reducing panel power consumption ide clipped-on surge suppressors S integrated into overall contactor dimensions allowing free access to coil terminals Multiple packaging available for all products 1SBC101277S0201 "Click" 4/2 | ABB Simple Choose reliable and time-saving solutions Select compact starters: – – Direct-on-line and reversing starters up to 7.5 kW – 400 V –– Star-delta starters up to 11 KW – 400 V. Protect your motors against short-circuits and overloads – – Type 1 or type 2 coordination guaranteed between contactors and short-circuit protection devices (manual motor starters or fuses) Time/cost saving solutions with –– Connection sets for reversing and star-delta starter –– Easy, fast and secure assembly, fitting and wiring of components –– Direct 35 mm rail mounting: no additional mounting plate required –– Easy installation and dismounting of contactors: no unwiring of manual motor starters. 4 Compliant to International standards Complies with RoHS European directives Make your control circuits safe High reliability for low signals Mechanically linked contacts according to IEC 60947-5-1 Annex L 3.0 Mirror contact according to IEC 60947-4-1 Annex F 2.1 Time and space-saving solutions, suitable for your applications Escalators Elevators Conveyors Compressors Door control Hvac Pumps Washing machines... 1SBC101277S0201 –– –– –– –– –– –– –– –– ABB | 4/3 Summary_4-1 4 4/4 | ABB Motor starting solutions Open type version, in kit form with screw terminals Starters protected by manual motor starters Overview 4/6 Direct-on-line starters 4/8 Reversing starters 4/12 Dimensions 4/16 Starters protected by thermal overload relays Overview 4/6 4/18 Star-delta starters 4/22 Dimensions 4/26 4 Summary_4-1 Direct-on-line and reversing starters ABB | 4/5 Motor starting solutions Open type version, in kit form Starters protected by manual motor starters Direct-on-line starters Reversing starters I> I> MS116 Manual motor starter MS116 Manual motor starter 4 BEA16-3 Connecting link BEA16-3 Connecting link BER16C-3 Connection set AS ASL Contactors AS ASL Contactors VM3 Mechanical interlock unit Starters protected by thermal overload relays Direct-on-line starters Reversing starters Star-delta starters BER16C-3 Connection set L Δ Y BEY16C-3 Connection set Timer AS ASL Contactors VM3 Mechanical interlock unit VM3 Mechanical interlock unit AS ASL Contactors T16 Thermal overload relay CA3 1-pole auxiliary contact block T16 Thermal overload relay T16 Thermal overload relay 4/6 | ABB 1SBC101271S0201 AS ASL Contactors Starters protected by manual motor starters Switching of 3-phase cage motors Direct-on-line starters Reversing starters Rated power - AC-3, 400 V 0.06...7.5 kW 0.06...7.5 kW Short-circuit current Iq 16 kA - 50 kA 16 kA - 50 kA Coordination type Type 1 & type 2 Type 1 & type 2 Manual motor starters MS116 MS116 AC operated AS09 ... AS16 AS09 ... AS16 DC operated ASL09 ... ASL16 ASL09 ... ASL16 Switching of 3-phase cage motors Direct-on-line starters Reversing starters Rated power - AC-3, 400 V 4...7.5 kW 4...7.5 kW AC operated AS09 ... AS16 AS09 ... AS16 DC operated ASL09 ... ASL16 ASL09 ... ASL16 T16 T16 Contactors 4 Contactors Thermal overload relays Switching of 3-phase cage motors Star-delta starters Rated power - AC-3, 400 V 7.5...11 kW Contactors Thermal overload relays AC operated AS09 ... AS16 DC operated ASL09 ... ASL16 1SBC101271S0201 Starters protected by thermal overload relays T16 ABB | 4/7 Direct-on-line starters protected by manual motor starters With AS, ASL contactors - open type version in kit form Application I> Full voltage direct-on-line starting for controlling three-phase asynchronous motors is a simple and economic solution characterised by a high starting torque (1.9 to 2.1 times full-speed torque) and a starting current 5.5 to 7 times nominal current. I/In C/Cn 7 1SBC101030F0014 I 5 I = current C = torque In = nominal current Cn = nominal torque 4 3 MS116 + BEA16-3 + AS16-30-10 2 C 1 0 10 30 60 80 100 Coordination types The contactor and the manual motor starter control and protect motors against overload and short-circuits according to coordination types 1 and 2 (IEC 60947-4-1 / EN 60947-4-1) defining the anticipated level of service continuity as follow: Type 1: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will not be able to then operate without being repaired or having parts replaced. Type 2: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will be able to operate afterwards. The risk of contacts light welding is acceptable. Main technical data Standards IEC 60947-4-1 / EN 60947-4-1 Rated operational voltage Ue max. 690 V - 50/60 Hz Rated insulation voltage Ui according to IEC 60947-4-1 690 V Switching frequency ≤ 15 starts/hour - 80 % max. load factor - with max. 1.5 s starting time ≤ 30 starts/hour - 50 % max. load factor - with max. 1.5 s starting time Ambient air temperature close to the device ≤ 55 °C Degree of protection IP20 Mounting positions os. 2 Pos +30° -30° Pos. 3 Pos. 4 Pos. 1 Pos. 1 ± 30° Pos. 5 4/8 | ABB 1SBC101272S0201 4 6 Direct-on-line starters protected by manual motor starters With AS, ASL contactors - open type version in kit form Description You can easily assemble a direct-on-line starter by using the BEA16-3 connecting link 3-pole insulated. It is used to electrically and mechanically connect MS116 manual motor starter and AS or ASL contactors. I> MS116 Manual motor starter BEA16-3 Connecting link Select now easily and quickly your starter in the following pages for coordination type 1 or 2 at 400 V, 50 / 60 Hz, Iq = 16 kA or Iq = 50 kA up to 7.5 kW. For complete coordination tables with MS116 or MS132, please contact your ABB local sales organization. 4 AS ASL Contactors 33 43 44 5/ L3 KM1:5/L3 34 3/ L2 1/ L1 Wiring diagrams Us 33 KM1:5/L3 Q1 34 Us 33 Q1 34 Q1 O KM1 14 14 I 13 5/ L3 3/ L2 1/ L1 13 KM1 I A1 O 13 6/ T3 2/ T1 4/ T2 I> I> I> Q1 KM1 44 KM1:3/L2 A1 Us N 43 Q1 44 KM1 A2 43 A2 Us N 14 6/ T3 4/ T2 2/ T1 A2 A1 KM1 KM1:3/L2 U1 V1 W1 M Power circuit AC local control 33 43 34 44 5/ L3 3/ L2 1/ L1 3 Q1 + 33 Q1 34 AC remote control + 33 Q1 34 13 13 KM1 I KM1 I 14 5/ L3 6/ T3 O 14 6/ T3 3/ L2 4/ T2 O 13 2/ T1 4/ T2 1/ L1 2/ T1 A1 I> I> I> A1+ A1+ KM1 1-phase M 43 Q1 44 DC local control A2- A2- KM1 - 43 Q1 44 1SBC101272S0201 14 A2 KM1 DC remote control ABB | 4/9 DOL starters protected by MS116 manual motor starters With AS contactors - open type version in kit form Coordination type 1 or type 2, AC-3, 16 kA or 50 kA, 400 V, 50/60 Hz Manual motor starters Contactors IEC Type AC-3, 400 V Rated operational power current kW A Coordination type 1 Order code I> Current setting range Magnetic Rated control circuit tripping voltage current Uc A A Type Order code Allowed setting current (1) V 50 Hz V 60 Hz 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 A Coordination type 2 0.06 0.2 MS116-0.25 1SAM250000R1002 0.16...0.25 2.44 AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS12-30-10-20 AS12-30-10-16 AS12-30-10-26 AS12-30-10-28 AS12-30-10-20 AS12-30-10-16 AS12-30-10-26 AS12-30-10-28 AS12-30-10-20 AS12-30-10-16 AS12-30-10-26 AS12-30-10-28 AS16-30-10-20 AS16-30-10-16 AS16-30-10-26 AS16-30-10-28 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL111001R2010 1SBL111001R1610 1SBL111001R2610 1SBL111001R2810 1SBL111001R2010 1SBL111001R1610 1SBL111001R2610 1SBL111001R2810 1SBL111001R2010 1SBL111001R1610 1SBL111001R2610 1SBL111001R2810 1SBL121001R2010 1SBL121001R1610 1SBL121001R2610 1SBL121001R2810 0.09 0.3 MS116-0.4 1SAM250000R1003 0.25...0.40 3.9 0.12 0.44 MS116-0.63 1SAM250000R1004 0.40...0.63 6.14 0.18 0.6 MS116-1.0 1SAM250000R1005 0.63...1.00 11.5 0.25 0.85 MS116-1.0 1SAM250000R1005 0.63...1.00 11.5 0.37 1.1 MS116-1.6 1SAM250000R1006 1.00...1.60 18.4 0.55 1.5 MS116-1.6 1SAM250000R1006 1.00...1.60 18.4 0.75 1.9 MS116-2.5 1SAM250000R1007 1.60...2.50 28.75 1.1 2.7 MS116-4.0 1SAM250000R1008 2.50...4.00 50 1.5 3.6 MS116-4.0 1SAM250000R1008 2.50...4.00 50 2.2 4.9 MS116-6.3 1SAM250000R1009 4.00...6.30 78.75 3 6.5 MS116-10 1SAM250000R1010 6.30...10.0 150 4 8.5 MS116-10 1SAM250000R1010 6.30...10.0 150 5.5 11.5 MS116-12 1SAM250000R1012 8.00...12.0 180 7.5 15.5 MS116-16 1SAM250000R1011 10.0...16.0 240 Main accessories Type Order code Connecting link for manual motor starter BEA16-3 1SBN081006T1000 Note: for multiple packaging, please contact your ABB local sales organization. 4/10 | ABB (1) Other control voltages see voltage code table. 0.25 0.4 0.63 1 1 1.6 1.6 2.5 4 4 6.3 10 10 12 15.5 1SBC101383S0201 4 Iq = 16 kA Iq = 50 kA DOL starters protected by MS116 manual motor starters With ASL contactors - open type version in kit form Coordination type 1 or type 2, AC-3, 16 or 50 kA, 400 V, 50/60 Hz Manual motor starters Contactors IEC Type AC-3, 400 V Rated operational power current kW A Coordination type 1 Order code I> Current setting range Magnetic Rated control circuit Type tripping voltage current Uc A A Order code Allowed setting current (1) V DC A Coordination type 2 Iq = 16 kA Iq = 50 kA 0.2 MS116-0.25 1SAM250000R1002 0.16...0.25 2.44 0.09 0.3 MS116-0.4 1SAM250000R1003 0.25...0.40 3.9 0.12 0.44 MS116-0.63 1SAM250000R1004 0.40...0.63 6.14 0.18 0.6 MS116-1.0 1SAM250000R1005 0.63...1.00 11.5 0.25 0.85 MS116-1.0 1SAM250000R1005 0.63...1.00 11.5 0.37 1.1 MS116-1.6 1SAM250000R1006 1.00...1.60 18.4 0.55 1.5 MS116-1.6 1SAM250000R1006 1.00...1.60 18.4 0.75 1.9 MS116-2.5 1SAM250000R1007 1.60...2.50 28.75 1.1 2.7 MS116-4.0 1SAM250000R1008 2.50...4.00 50 1.5 3.6 MS116-4.0 1SAM250000R1008 2.50...4.00 50 2.2 4.9 MS116-6.3 1SAM250000R1009 4.00...6.30 78.75 3 6.5 MS116-10 1SAM250000R1010 6.30...10.0 150 4 8.5 MS116-10 1SAM250000R1010 6.30...10.0 150 5.5 11.5 MS116-12 1SAM250000R1012 8.00...12.0 180 7.5 15.5 MS116-16 1SAM250000R1011 10.0...16.0 240 ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL12-30-10-81 ASL12-30-10-83 ASL12-30-10-86 ASL12-30-10-88 ASL12-30-10-81 ASL12-30-10-83 ASL12-30-10-86 ASL12-30-10-88 ASL12-30-10-81 ASL12-30-10-83 ASL12-30-10-86 ASL12-30-10-88 ASL16-30-10-81 ASL16-30-10-83 ASL16-30-10-86 ASL16-30-10-88 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL113001R8110 1SBL113001R8310 1SBL113001R8610 1SBL113001R8810 1SBL113001R8110 1SBL113001R8310 1SBL113001R8610 1SBL113001R8810 1SBL113001R8110 1SBL113001R8310 1SBL113001R8610 1SBL113001R8810 1SBL123001R8110 1SBL123001R8310 1SBL123001R8610 1SBL123001R8810 Main accessories Type Order code Connecting link for manual motor starter BEA16-3 1SBN081006T1000 Note: for multiple packaging, please contact your ABB local sales organization. 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 4 0.25 0.4 0.63 1 1 1.6 1.6 2.5 4 4 6.3 10 10 12 15.5 1SBC101383S0201 0.06 (1) Other control voltages see voltage code table. ABB | 4/11 Reversing starters protected by manual motor starters With AS, ASL contactors - open type version in kit form Application I> Full voltage reversing starting for controlling three-phase asynchronous motors is a simple and economic solution characterised by a high starting torque (1.9 to 2.1 times full-speed torque) and a starting current 5.5 to 7 times nominal current. I/In C/Cn 7 6 1SBC101027F0014 I 4 5 I = current C = torque In = nominal current Cn = nominal torque 4 3 2 MS116 + BEA16-3 + VM3 + BER16C-3 + AS16-30-01 C 1 0 10 30 60 80 100 Coordination types The contactor and the manual motor starter control and protect motors against overload and short-circuits according to coordination types 1 and 2 (IEC 60947-4-1 / EN 60947-4-1) defining the anticipated level of service continuity as follow: Type 1: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will not be able to then operate without being repaired or having parts replaced. Type 2: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will be able to operate afterwards. The risk of contacts light welding is acceptable. Main technical data Standards IEC 60947-4-1 / EN 60947-4-1 Rated operational voltage Ue max. 690 V - 50/60 Hz Rated insulation voltage Ui according to IEC 60947-4-1 690 V Switching frequency ≤ 15 starts/hour - 80 % max. load factor - with max. 1.5 s starting time ≤ 30 starts/hour - 50 % max. load factor - with max. 1.5 s starting time Ambient air temperature close to the device ≤ 55 °C Degree of protection IP20 Note: Minimum switchover delay of 50 ms must be introduced between respective opening and closing of AC operated reversing contactors Mounting positions Pos os. 2 -30° Pos. 3 Pos. 1 Pos. 1 ± 30° Pos. 5 4/12 | ABB 1SBC101274S0201 Pos. 4 +30° Reversing starters protected by manual motor starters With AS, ASL contactors - open type version in kit form Description You can easily assemble reversing starter thanks to our complete range of accessories: – – BEA16-3 connecting link 3-pole insulated: it is used to electrically and mechanically connect MS116 manual motor starter and AS or ASL contactors. – – VM3 mechanical interlock unit: just clip it between the 2 contactors without increasing starter width. – – BER16C-3 connection set: it assures a safe and simple connection between both contactor main terminals and an electrical interlocking between coil and N.C. built-in auxiliary contact terminals of both contactors. I> MS116 Manual motor starter BEA16-3 Connecting link 4 Select now easily and quickly your starter in the following pages for coordination type 1 or 2 at 400 V, 50 / 60 Hz, Iq = 16 kA or Iq = 50 kA up to 7.5 kW. For complete coordination tables with MS116 or MS132, please contact your ABB local sales organization. AS ASL Contactors VM3 Mechanical interlock unit BER16C-3 Connection set Wiring diagrams 43 44 5/L3 33 34 3/L2 1/L1 KM2:5/L3 Us 33 KM2:5/L3 Q1 34 Us Q1 33 34 Q1 O O 14 44 21 A1 Q1 KM2:3/L2 22 22 43 21 Us N A1 21 A1 A2 KM2 KM1 KM1 KM2 A2 14 22 21 A1 KM1 KM2 A2 44 KM2 I KM1 A2 Q1 KM2 14 13 M 43 KM1 13 13 22 13 14 6/T3 4/T2 2/T1 KM2 Us N U1 V1 W1 II 14 5/L3 21 22 3/L2 1/L1 A1 14 6/T3 4/T2 2/T1 KM2 A2 13 21 22 5/L3 3/L2 1/L1 A1 A2 KM2:3/L2 AC local control AC remote control 3 Power circuit + 33 Q1 34 + 33 Q1 34 O O 43 43 13 22 21 A1+ KM2 A2- A2- - Q1 A2- 21 A1+ DC local control 14 14 KM1 KM2 44 KM1 21 KM2 44 DC remote control ABB | 4/13 1SBC101274S0201 - 22 14 21 KM1 KM2 I KM1 A1+ KM2 Q1 KM1 KM2 A1+ 22 14 II 22 KM1 I 13 13 13 II A2- KM1 KM1 I 13 II 6/T3 4/T2 2/T1 I> I> I> Reversing starters protected by MS116 manual motor starters With AS contactors - open type version in kit form Coordination type 1 or type 2, AC-3, 16 kA or 50 kA, 400 V, 50/60 Hz Manual motor starters Contactors IEC Type AC-3, 400 V Rated operational power current kW A Coordination type 1 Coordination type 2 Order code I> Current setting range Magnetic Rated control circuit tripping voltage current Uc A A Type Order code Allowed setting current (1) V 50 Hz V 60 Hz 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 A Iq = 16 kA Iq = 50 kA 0.06 0.2 MS116-0.25 1SAM250000R1002 0.16...0.25 2.44 0.09 0.3 MS116-0.4 1SAM250000R1003 0.25...0.40 3.9 0.12 0.44 MS116-0.63 1SAM250000R1004 0.40...0.63 6.14 0.18 0.6 MS116-1.0 1SAM250000R1005 0.63...1.00 11.5 0.25 0.85 MS116-1.0 1SAM250000R1005 0.63...1.00 11.5 0.37 1.1 MS116-1.6 1SAM250000R1006 1.00...1.60 18.4 0.55 1.5 MS116-1.6 1SAM250000R1006 1.00...1.60 18.4 0.75 1.9 MS116-2.5 1SAM250000R1007 1.60...2.50 28.75 1.1 2.7 MS116-4.0 1SAM250000R1008 2.50...4.00 50 1.5 3.6 MS116-4.0 1SAM250000R1008 2.50...4.00 50 2.2 4.9 MS116-6.3 1SAM250000R1009 4.00...6.30 78.75 3 6.5 MS116-10 1SAM250000R1010 6.30...10.0 150 4 8.5 MS116-10 1SAM250000R1010 6.30...10.0 150 5.5 11.5 MS116-12 1SAM250000R1012 8.00...12.0 180 7.5 15.5 MS116-16 1SAM250000R1011 10.0...16.0 240 Note: for multiple packaging, please contact your ABB local sales organization. upstream connection BEA16-3 4/14 | ABB BER16C-3 downstream connection VM3 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS12-30-01-20 AS12-30-01-16 AS12-30-01-26 AS12-30-01-28 AS12-30-01-20 AS12-30-01-16 AS12-30-01-26 AS12-30-01-28 AS12-30-01-20 AS12-30-01-16 AS12-30-01-26 AS12-30-01-28 AS16-30-01-20 AS16-30-01-16 AS16-30-01-26 AS16-30-01-28 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL111001R2001 1SBL111001R1601 1SBL111001R2601 1SBL111001R2801 1SBL111001R2001 1SBL111001R1601 1SBL111001R2601 1SBL111001R2801 1SBL111001R2001 1SBL111001R1601 1SBL111001R2601 1SBL111001R2801 1SBL121001R2001 1SBL121001R1601 1SBL121001R2601 1SBL121001R2801 Type BEA16-3 BER16C-3 VM3 Order code 1SBN081006T1000 1SBN081012R1000 1SBN031005T1000 (1) Other control voltages see voltage code table. Main accessories Connecting link for manual motor starter Connection set for reversing starter Mechanical interlock unit 0.25 0.4 0.63 1 1 1.6 1.6 2.5 4 4 6.3 10 10 12 15.5 1SBC101273S0201 4 Reversing starters protected by MS116 manual motor starters With ASL contactors - open type version in kit form Coordination type 1 or type 2, AC-3, 16 or 50 kA, 400 V, 50/60 Hz Manual motor starters Contactors IEC Type AC-3, 400 V Rated operational power current kW A Coordination type 1 Coordination type 2 Order code I> Current setting range Magnetic Rated control circuit Type tripping voltage current Uc A A Order code Allowed setting current (1) V DC A Iq = 16 kA Iq = 50 kA 0.2 MS116-0.25 1SAM250000R1002 0.16...0.25 2.44 0.09 0.3 MS116-0.4 1SAM250000R1003 0.25...0.40 3.9 0.12 0.44 MS116-0.63 1SAM250000R1004 0.40...0.63 6.14 0.18 0.6 MS116-1.0 1SAM250000R1005 0.63...1.00 11.5 0.25 0.85 MS116-1.0 1SAM250000R1005 0.63...1.00 11.5 0.37 1.1 MS116-1.6 1SAM250000R1006 1.00...1.60 18.4 0.55 1.5 MS116-1.6 1SAM250000R1006 1.00...1.60 18.4 0.75 1.9 MS116-2.5 1SAM250000R1007 1.60...2.50 28.75 1.1 2.7 MS116-4.0 1SAM250000R1008 2.50...4.00 50 1.5 3.6 MS116-4.0 1SAM250000R1008 2.50...4.00 50 2.2 4.9 MS116-6.3 1SAM250000R1009 4.00...6.30 78.75 3 6.5 MS116-10 1SAM250000R1010 6.30...10.0 150 4 8.5 MS116-10 1SAM250000R1010 6.30...10.0 150 5.5 11.5 MS116-12 1SAM250000R1012 8.00...12.0 180 7.5 15.5 MS116-16 1SAM250000R1011 10.0...16.0 240 Note: for multiple packaging, please contact your ABB local sales organization. upstream connection BEA16-3 BER16C-3 downstream connection VM3 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL12-30-01-81 ASL12-30-01-83 ASL12-30-01-86 ASL12-30-01-88 ASL12-30-01-81 ASL12-30-01-83 ASL12-30-01-86 ASL12-30-01-88 ASL12-30-01-81 ASL12-30-01-83 ASL12-30-01-86 ASL12-30-01-88 ASL16-30-01-81 ASL16-30-01-83 ASL16-30-01-86 ASL16-30-01-88 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL113001R8101 1SBL113001R8301 1SBL113001R8601 1SBL113001R8801 1SBL113001R8101 1SBL113001R8301 1SBL113001R8601 1SBL113001R8801 1SBL113001R8101 1SBL113001R8301 1SBL113001R8601 1SBL113001R8801 1SBL123001R8101 1SBL123001R8301 1SBL123001R8601 1SBL123001R8801 Type BEA16-3 BER16C-3 VM3 Order code 1SBN081006T1000 1SBN081012R1000 1SBN031005T1000 0.25 0.4 0.63 1 1 1.6 1.6 2.5 4 4 6.3 10 10 12 15.5 (1) Other control voltages see voltage code table. Main accessories Connecting link for manual motor starter Connection set for reversing starter Mechanical interlock unit 4 1SBC101273S0201 0.06 ABB | 4/15 DOL starters protected by MS116 manual motor starters With AS, ASL contactors - open type version in kit form 17.5 0.69" 176 6.93" 176 6.93" 26.25 1.03" ø 4.5 0.18" 10 0.39" ø 4.5 0.18" 10 0.39" 17.5 0.69" 5.5 0.22" 35 mm EN/IEC 60715 45 1.77" 10.1 0.4" 6 0.24" 85.6 3.37" 75 2.95" 170 6.69" 4 6 0.24" Main dimensions mm, inches Direct-on-line starters 26.25 1.03" 72.5 2.85" 10 0.39" 35 1.38" 5 0.2" ø 4.2 0.17" 5 0.2" 35 1.38" 5 0.2" 4 0.16" 7 0.28" 45 1.77" 4 0.16" ø 4.2 0.17" 5 0.2" 5 0.2" 1SBC101279S0201 MS116 + BEA16-3 + AS09, ASL09, AS12, ASL12, AS16, ASL16 4/16 | ABB Reversing starters protected by MS116 manual motor starters With AS, ASL contactors - open type version in kit form ø 4.2 0.17" ø 4.5 0.18" 80 3.15" 10 0.39" 5 0.20" 26.25 1.03" 4 5 0.2" 4 0.16" 4 0.16" 10 0.39" 6 0.24" 176 6.93" 26.25 1.03" 5 0.2" 72.5 2.85" 17.5 0.69" 10 0.39" 176 6.93" 35 mm EN/IEC 60715 5.5 0.22" 3 0.12" 170 6.69" ø 4.5 0.18" 10.1 0.40" 7 0.28" 90 3.54" 17.5 0.69" 5 0.2" 75 2.95" 85.6 3.37" 45 1.77" 45 1.77" 6 0.24" Main dimensions mm, inches Reversing starters ø 4.2 0.17" 80 3.15" 5 0.20" 1SBC101278S0201 MS116 + BEA16-3 + BER16C-3 + VM3 + AS09, ASL09, AS12, ASL12, AS16, ASL16 ABB | 4/17 DOL & reversing starters protected by thermal overload relays With AS, ASL contactors - open type version in kit form Application 1SBC101204F0014 Full voltage direct-on-line and reversing starting for controlling three-phase asynchronous motors is a simple and economic solution characterised by a high starting torque (1.9 to 2.1 times full-speed torque) and a starting current 5.5 to 7 times nominal current. I/In C/Cn 7 6 I 5 I = current C = torque In = nominal current Cn = nominal torque 4 3 2 C 1 0 1SBC101205F0014 10 30 60 80 100 Coordination types The contactor, the short-circuit protection device and the thermal overload relay control and protect motors against overload and short-circuits according to coordination types 1 and 2 (IEC 60947-4-1 / EN 60947-4-1) defining the anticipated level of service continuity as follow: Type 1: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will not be able to then operate without being repaired or having parts replaced. Type 2: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will be able to operate afterwards. The risk of contacts light welding is acceptable. AS09-30-01 + BER16C + VM3 + T16 Main technical data Standards IEC 60947-4-1 / EN 60947-4-1 Rated operational voltage Ue max. 690 V - 50/60 Hz Rated insulation voltage Ui according to IEC 60947-4-1 690 V Air temperature close to the device ≤ 60 °C Degree of protection IP20 Switching frequency Thermal overload relays cannot be operated at any arbitrary switching frequency in order to avoid tripping. Applications involving up to 15 operations per hour are acceptable. Higher switching frequencies are permitted if the duty ratio and the motor starting time are allowed for and if the motor's making current does not appreciably exceed 6 times the rated operating current. Please refer to the adjacent diagram for guideline values for the permitted switching frequency. Example: Starting time of the motor: 1 second Duty ratio: 40 % means a permitted switching frequency of max. 60 operating cycles per hour. Switching frequency (ops/h) 140 Ta = 120 0. 5 s 100 Ta = 80 1s 60 Ta = 1.5 s 40 Ta = 3 s 20 Ta = 5 s 0 0 10 20 30 40 50 60 70 80 90 100 Duty ratio (%) Duty ratio in %, Ta: motor starting time Note: Minimum switchover delay of 50 ms must be introduced between respective opening and closing of AC operated reversing contactors Mounting positions Direct-on-line Pos. 1 4/18 | ABB Reversing Pos. 1 1SBC101275S0201 4 AS09-30-10 + T16 DOL & reversing starters protected by thermal overload relays With AS, ASL contactors - open type version in kit form Direct-on-line starters Reversing starters Description You can easily assemble a direct-on-line starter by connecting AS or ASL contactors and T16 thermal overload relay. You can easily assemble reversing starter thanks to our complete range of accessories: – – VM3 mechanical interlock unit: just clip it between the 2 contactors without increasing starter length. – – BER16C-3 connection set: it assures a safe and simple reversing connection between both contactor main terminals and an electrical interlocking between coil and N.C. built-in auxiliary contact terminals of both contactors. BER16C-3 Connection set AS ASL Contactors VM3 Mechanical interlock unit AS ASL Contactors 4 Select now easily and quickly your starter in the following pages at 400 V, up to 7.5 kW. T16 Thermal overload relay For complete coordination tables, please contact your ABB local sales organization. T16 Thermal overload relay Wiring diagrams 96 FR1 2/T1 4/T2 6/T3 14 STOP FR1 STOP FR1 FR1 KM1 I KM1 14 14 I 14 KM1 I 13 13 13 KM1 U Power circuit W U M ~ A1+ KM1 A2- A2- A2 KM1 - KM1:3/L2 - V M ~ 1-phase KM1 Us N KM1:3/L2 V A1+ A1 KM1 Us N A2 2/T1 4/T2 6/T3 A1 FR1 2/T1 4/T2 6/T3 96 98 FR1 TEST STOP A M 95 97 A M RESET O 14 I RESET M O 13 2/T1 4/T2 6/T3 14 A2 STOP 96 STOP KM1 RESET M 95 RESET + A 96 M 95 RESET + A 95 Us A 96 KM1:5/L3 Us 95 1/L1 3/L2 5/L3 KM1:5/L3 13 A1 13 1/L1 3/L2 5/L3 Direct-on-line starters AC local control AC remote control DC local control DC remote control STOP FR1 96 96 FR1 AC remote control 13 22 KM1 KM2 A2- - KM1 A1+ 21 A1+ 21 A1+ 21 A2- A2- 14 13 22 14 22 22 KM2 KM2 DC local control KM2 I KM1 KM1 - 14 KM2 14 II A1+ 21 KM2 KM1:3/L2 KM1 13 13 14 21 A1 KM2 A2 A2 KM1 22 21 KM1 A2 21 A1 Us N KM1 A1 KM2 KM2 AC local control 13 13 22 14 21 A1 KM1 KM1:3/L2 I DC remote control ABB | 4/19 1SBC101275S0201 W 22 22 V M ~ Us N A2 2/T1 4/T2 6/T3 U II KM2 I KM1 FR1 STOP STOP 14 KM2 A M O KM1 13 13 II 14 KM1 RESET 95 95 FR1 + A M II 95 97 FR1 Power circuit RESET O KM2 96 98 TEST STOP + A M 96 STOP I A RESET M RESET Us A2- 21 13 2/T1 4/T2 6/T3 22 14 1/L1 3/L2 5/L3 A1 A2 21 13 1/L1 3/L2 5/L3 A1 A2 2/T1 4/T2 6/T3 22 14 KM1 KM2 KM1:5/L3 A M 95 RESET Us 96 KM1:5/L3 95 Reversing starters DOL starters protected by thermal overload relays With AS, ASL contactors - open type version in kit form Contactors - AC operated Contactors 5.5 11.5 7.5 15.5 Rated control circuit voltage Uc Type Order code AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS12-30-10-20 AS12-30-10-16 AS12-30-10-26 AS12-30-10-28 AS16-30-10-20 AS16-30-10-16 AS16-30-10-26 AS16-30-10-28 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL111001R2010 1SBL111001R1610 1SBL111001R2610 1SBL111001R2810 1SBL121001R2010 1SBL121001R1610 1SBL121001R2610 1SBL121001R2810 Setting ranges Accessories Type Order code A ... A 7.60...10.0 T16-10 1SAZ711201R1043 - 10.0...13.0 T16-13 1SAZ711201R1045 - 13.0...16.0 T16-16 1SAZ711201R1047 - Setting ranges Type Order code A ... A 7.60...10.0 T16-10 1SAZ711201R1043 - 10.0...13.0 T16-13 1SAZ711201R1045 - 13.0...16.0 T16-16 1SAZ711201R1047 - (1) V 50 Hz 24 230 400 24 230 400 24 230 400 V 60 Hz 24 120 230 400 24 120 230 400 24 120 230 400 Contactors - DC operated IEC AC-3, 400 V Rated operational power current kW A 4 8.5 5.5 11.5 7.5 15.5 Rated control circuit voltage Uc Type Order code ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL12-30-10-81 ASL12-30-10-83 ASL12-30-10-86 ASL12-30-10-88 ASL16-30-10-81 ASL16-30-10-83 ASL16-30-10-86 ASL16-30-10-88 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL113001R8110 1SBL113001R8310 1SBL113001R8610 1SBL113001R8810 1SBL123001R8110 1SBL123001R8310 1SBL123001R8610 1SBL123001R8810 (1) DC 24 48 110 220 24 48 110 220 24 48 110 220 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. see table below for all setting ranges Setting ranges A ... A 0.10...0.13 0.13...0.17 0.17...0.23 0.23...0.31 0.31...0.41 0.41...0.55 0.55...0.74 0.74...1.00 1.00...1.30 1.30...1.70 1.70...2.30 2.30...3.10 3.10...4.20 4.20...5.70 5.70...7.60 7.60...10.0 10.0...13.0 13.0...16.0 4/20 | ABB Type Order code T16-0.13 T16-0.17 T16-0.23 T16-0.31 T16-0.41 T16-0.55 T16-0.74 T16-1.0 T16-1.3 T16-1.7 T16-2.3 T16-3.1 T16-4.2 T16-5.7 T16-7.6 T16-10 T16-13 T16-16 1SAZ711201R1005 1SAZ711201R1008 1SAZ711201R1009 1SAZ711201R1013 1SAZ711201R1014 1SAZ711201R1017 1SAZ711201R1021 1SAZ711201R1023 1SAZ711201R1025 1SAZ711201R1028 1SAZ711201R1031 1SAZ711201R1033 1SAZ711201R1035 1SAZ711201R1038 1SAZ711201R1040 1SAZ711201R1043 1SAZ711201R1045 1SAZ711201R1047 1SBC101280S0201 4 IEC AC-3, 400 V Rated operational power current kW A 4 8.5 Thermal overload relays Reversing starters protected by thermal overload relays With AS, ASL contactors - open type version in kit form Contactors - AC operated Contactors Thermal overload relays Accessories VM3 + BER16C-3 IEC AC-3, 400 V Rated operational power current kW A 4 8.5 5.5 11.5 7.5 15.5 Rated control circuit voltage Uc Type Order code Setting ranges Type Order code Type CA3-10 Order code (1) V 50 Hz 24 230 400 24 230 400 24 230 400 V 60 Hz 24 120 230 400 24 120 230 400 24 120 230 400 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS12-30-01-20 AS12-30-01-16 AS12-30-01-26 AS12-30-01-28 AS16-30-01-20 AS16-30-01-16 AS16-30-01-26 AS16-30-01-28 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL111001R2001 1SBL111001R1601 1SBL111001R2601 1SBL111001R2801 1SBL121001R2001 1SBL121001R1601 1SBL121001R2601 1SBL121001R2801 4 A ... A 7.60...10.0 T16-10 1SAZ711201R1043 10.0...13.0 T16-13 1SAZ711201R1045 13.0...16.0 T16-16 1SAZ711201R1047 Setting ranges Type A ... A 7.60...10.0 BER16C-3 + VM3 + 2x CA3-10 BER16C-3 + VM3 + 2x CA3-10 BER16C-3 + VM3 + 2x CA3-10 1SBN081012R1000 + 1SBN031005T1000 + 1SBN011010T1010 1SBN081012R1000 + 1SBN031005T1000 + 1SBN011010T1010 1SBN081012R1000 + 1SBN031005T1000 + 1SBN011010T1010 Order code Type Order code T16-10 1SAZ711201R1043 10.0...13.0 T16-13 1SAZ711201R1045 13.0...16.0 T16-16 1SAZ711201R1047 BER16C-3 + VM3 + 2x CA3-10 BER16C-3 + VM3 + 2x CA3-10 BER16C-3 + VM3 + 2x CA3-10 1SBN081012R1000 + 1SBN031005T1000 + 1SBN011010T1010 1SBN081012R1000 + 1SBN031005T1000 + 1SBN011010T1010 1SBN081012R1000 + 1SBN031005T1000 + 1SBN011010T1010 Contactors - DC operated 5.5 11.5 7.5 15.5 Rated control circuit voltage Uc Type Order code ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL12-30-10-81 ASL12-30-10-83 ASL12-30-10-86 ASL12-30-10-88 ASL16-30-10-81 ASL16-30-10-83 ASL16-30-10-86 ASL16-30-10-88 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL113001R8110 1SBL113001R8310 1SBL113001R8610 1SBL113001R8810 1SBL123001R8110 1SBL123001R8310 1SBL123001R8610 1SBL123001R8810 (1) DC 24 48 110 220 24 48 110 220 24 48 110 220 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. see table below for all setting ranges Setting ranges A ... A 0.10...0.13 0.13...0.17 0.17...0.23 0.23...0.31 0.31...0.41 0.41...0.55 0.55...0.74 0.74...1.00 1.00...1.30 1.30...1.70 1.70...2.30 2.30...3.10 3.10...4.20 4.20...5.70 5.70...7.60 7.60...10.0 10.0...13.0 13.0...16.0 Type Order code T16-0.13 T16-0.17 T16-0.23 T16-0.31 T16-0.41 T16-0.55 T16-0.74 T16-1.0 T16-1.3 T16-1.7 T16-2.3 T16-3.1 T16-4.2 T16-5.7 T16-7.6 T16-10 T16-13 T16-16 1SAZ711201R1005 1SAZ711201R1008 1SAZ711201R1009 1SAZ711201R1013 1SAZ711201R1014 1SAZ711201R1017 1SAZ711201R1021 1SAZ711201R1023 1SAZ711201R1025 1SAZ711201R1028 1SAZ711201R1031 1SAZ711201R1033 1SAZ711201R1035 1SAZ711201R1038 1SAZ711201R1040 1SAZ711201R1043 1SAZ711201R1045 1SAZ711201R1047 1SBC101280S0201 IEC AC-3, 400 V Rated operational power current kW A 4 8.5 ABB | 4/21 Star-delta starters protected by thermal overload relays With AS, ASL contactors - open type version in kit form Application L Δ Y Star-delta starting is the most common method to reduce the starting current of a motor. This system can be used on all the squirrel cage motors, which are normally used in delta connection. In this type of starting, it is recommended to choose motors having high starting torque i.e. much higher than the resistive torque in order to reach sufficient high speed when the motor is connected in star. I/In T/T n 7 1SBC101207F0014 When starting: 4 AS09-30-10 + AS09-30-01 + AS09-30-01 + BEY16C-3 + VM3 + CT-SDS + CA3-10 + T16 – – Inrush current is reduced to a third of direct starting current – – Motor torque is reduced to a third or even less of direct starting torque. Transient current is generated when switching from star to delta connection. During the initial starting phase ("star" connection), the resistive torque of the driven load must remain, irrespective of speed, less than the "star" motor torque until "star-delta" switching occurs. This starting mode is therefore ideal for machines having low starting torque such as pumps, centrifugal compressors, wood-working machines... I = current T = torque 6 In = nominal current Tn = nominal torque I (delta) 5 4 3 T∆ (motor) I (star) 2 1 T (motor) Tr (resistive torque) 0 20 40 60 80 100 Motor speed (%) Precaution – – Motor nominal voltage in delta connection must be equal to that of the mains. Example: a motor for 400 V star-delta starting must be designed for 400 V in "delta" connection. Its usual designation is "400 V / 690 V motor". The motor must be constructed with 6 terminal windings – – In order to prevent a high current peak, at least 85 % of nominal speed must be reached before switching from star to delta Sequence Starting is a three-stage process: 1 st stage: "Star" connection - Press the "On" button on the control circuit to close the KM2 "Star" contactor. The KM1 "line" contactor then closes and the motor starts. Countdown of programmed starting time (6 to 10 s) then begins. 2 nd stage: "Star" to "Delta" switching - when programmed starting time is over, the KM2 "Star" contactor opens. 3 rd stage: "Delta" connection - A transition time (or dwelling time) of 50 ms is fixed between opening of the "star" contactor and closing of the "delta" contactor by the use of CT-SDS timer. This prevent short-circuit between "star" and "delta". Main technical data IEC 60947-4-1 / EN 60947-4-1 690 V - 50/60 Hz 690 V ≤ 60 °C IP20 70 60 ta = 5s 50 40 ta = ta = 30 8s 10 s ta = 1 2s 20 ta = 15 s ta = 20 s 10 0 0 10 20 30 40 50 Pos. 1 70 80 90 100 Duty ratio (%) Duty ratio in %, Ta: acceleration time 4/22 | ABB 60 1SBC101288S0201 Switching frequency (ops/h) Mounting positions Standards Rated operational voltage Ue max. Rated insulation voltage Ui according to IEC 60947-4-1 Air temperature close to the device Degree of protection Switching frequency Switching frequency/hour, according to acceleration time and load factor. Respect of the following conditions enables utilization of the starter without excessive overheating of the connections or nuisance tripping of the thermal overload relay. Example: – Switching frequency = 15 starts/hr – Motor starting time "Ta" = 7 s (use 8 s curve) – Maximum load factor = 63 %. This corresponds to a 4-minute operating cycle (15 starts/hr) with 7 seconds acceleration, 2.5 minutes operation and 1.5 minutes rest. Star-delta starters protected by thermal overload relays With AS, ASL contactors - open type version in kit form L Δ Y Description Timer BEY16C-3 Connection set You can easily assemble a star-delta starter thanks to our complete range of accessories: – – VM3 mechanical interlock unit: just clip it between the 2 contactors without increasing starter length. – – BEY16C-3 connection set: it assures a safe and simple connection between contactors main terminals and an electrical interlocking between coil and N.C. built-in auxiliary contact terminals of star and delta contactors. 2 KM 3 1 KM KM VM3 Mechanical interlock unit Select now easily and quickly your starter in the following pages at 400 V, up to 11 kW. CA3 1-pole auxiliary contact block AS ASL Contactors 4 For complete coordination tables, please contact your ABB local sales organization. BEY16C-3 Connection set T16 Thermal overload relay Wiring diagrams W2 V2 U2 23 24 17 17 A1 22 18 A1 21 A2 A2 22 28 A1 21 A2 KM2 KT Y 14 AC remote control FR1 RESET MA O STOP FR1 I 23 23 STOP A1 14 L + RESET A M KM3 A2 A1 A2 A1 21 A2 KM1 AC local control + 13 13 22 18 22 28 A2 Y KM3 95 W1 V1 U1 KM1:3/L2 KM2 KT KM3 L KM2 96 W2 V2 U2 Us N 95 W1 V1 U1 A1 21 14 KM1 KM1:3/L2 KM2 KM1 KM3 KM2 96 2/T1 4/T2 6/T3 KM2 KM1 Us N I KM1 A2 13 13 96 98 FR1 FR1 KT A1 14 95 97 TEST STOP O 95 STOP KM1 I KT RESET A M 96 95 FR1 24 A2 A RESET M Us 2/T1 4/T2 6/T3 14 22 A2 2/T1 4/T2 6/T3 22 96 1/L1 3/L2 5/L3 13 21 A1 1/L1 3/L2 5/L3 21 A1 1/L1 3/L2 5/L3 13 23 A1 A2 STOP KM2 KM3 2/T1 4/T2 6/T3 14 24 KM1 KM1:5/L3 A RESETM Us 23 KM1:5/L3 KM1 KM1 KT DC local control 22 18 L A1+ 21 A2- A1+ A1+ 21 KM3 KT A2- KM2 KM3 A2- A2- KM1 - 22 28 13 13 14 A1+ 14 A1+ 22 28 22 18 21 Y KM2 Y DC remote control ABB | 4/23 1SBC101288S0201 L KM2 KM1 KM2 KT KM3 KM1 - A1+ t2 A2- t1 t1 = adjusted starting time t2 = transition time (50ms) A2- green LED KM3 A1+ 21 KM2 A1+ 17-28 KT A2- KM1 14 KM2 13 13 17-18 14 A1-A2 A2- Function diagram Electronic Timer 17 17 24 24 I Star-delta starters protected by thermal overload relays With AS, ASL contactors - open type version in kit form Contactors - AC operated L Δ Star contactor KM2 Type Order code Type Order code Type Order code AS09-30-10-20 AS09-30-10-16 AS09-30-10-26 AS09-30-10-28 AS12-30-10-20 AS12-30-10-16 AS12-30-10-26 AS12-30-10-28 1SBL101001R2010 1SBL101001R1610 1SBL101001R2610 1SBL101001R2810 1SBL111001R2010 1SBL111001R1610 1SBL111001R2610 1SBL111001R2810 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS12-30-01-20 AS12-30-01-16 AS12-30-01-26 AS12-30-01-28 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL111001R2001 1SBL111001R1601 1SBL111001R2601 1SBL111001R2801 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 AS09-30-01-20 AS09-30-01-16 AS09-30-01-26 AS09-30-01-28 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 1SBL101001R2001 1SBL101001R1601 1SBL101001R2601 1SBL101001R2801 Type Order code Type Order code Type Order code ASL09-30-10-81 ASL09-30-10-83 ASL09-30-10-86 ASL09-30-10-88 ASL12-30-10-81 ASL12-30-10-83 ASL12-30-10-86 ASL12-30-10-88 1SBL103001R8110 1SBL103001R8310 1SBL103001R8610 1SBL103001R8810 1SBL113001R8110 1SBL113001R8310 1SBL113001R8610 1SBL113001R8810 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL12-30-01-81 ASL12-30-01-83 ASL12-30-01-86 ASL12-30-01-88 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL113001R8101 1SBL113001R8301 1SBL113001R8601 1SBL113001R8801 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 ASL09-30-01-81 ASL09-30-01-83 ASL09-30-01-86 ASL09-30-01-88 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 1SBL103001R8101 1SBL103001R8301 1SBL103001R8601 1SBL103001R8801 Y IEC AC-3, 400 V Rated operational power current kW A 7.5 15.5 11 Delta contactor KM3 22 Rated control circuit voltage Uc (1) V 50 Hz 24 230 400 24 230 400 V 60 Hz 24 120 230 400 24 120 230 400 Contactors - DC operated IEC AC-3, 400 V Rated operational power current kW A 7.5 15.5 11 22 Rated control circuit voltage Uc (1) DC 24 48 110 220 24 48 110 220 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. 1SBC101281S0201 4 Line contactor KM1 4/24 | ABB Star-delta starters protected by thermal overload relays With AS, ASL contactors - open type version in kit form Thermal overload relays Connection sets Mechanical interlock unit Auxiliary contact block Electronic timer Type Type The setting current value is: nominal motor current x 0.58 Setting ranges Type Order code Type Order code Order code Order code 4 A ... A 7.60…10.0 10.0...13.0 Setting ranges A ... A 7.60...10.0 10.0...13.0 T16-10 1SAZ711201R1043 T16-13 1SAZ711201R1045 Type Order code T16-10 1SAZ711201R1043 T16-13 1SAZ711201R1045 BEY16C-3 1SBN081018R2000 + + VM3 1SBN031005T1000 KM1: 1 x CA3-10 1SBN011010T1010 BEY16C-3 1SBN081018R2000 + + VM3 1SBN031005T1000 KM1: 1 x CA3-10 1SBN011010T1010 Type Type Order code KM2: 1 x CA3-10 1SBN011010T1010 KM2: 1 x CA3-10 1SBN011010T1010 Order code CT-SDS… see "Ordering Details" CT-SDS… see "Ordering Details" Type BEY16C-3 1SBN081018R2000 + + VM3 1SBN031005T1000 KM1: 1 x CA3-10 1SBN011010T1010 BEY16C-3 1SBN081018R2000 + + VM3 1SBN031005T1000 KM1: 1 x CA3-10 1SBN011010T1010 KM2: 1 x CA3-10 1SBN011010T1010 KM2: 1 x CA3-10 1SBN011010T1010 Order code CT-SDS… see "Ordering Details" CT-SDS… see "Ordering Details" see table below for all setting ranges Type Order code T16-0.13 T16-0.17 T16-0.23 T16-0.31 T16-0.41 T16-0.55 T16-0.74 T16-1.0 T16-1.3 T16-1.7 T16-2.3 T16-3.1 T16-4.2 T16-5.7 T16-7.6 T16-10 T16-13 T16-16 1SAZ711201R1005 1SAZ711201R1008 1SAZ711201R1009 1SAZ711201R1013 1SAZ711201R1014 1SAZ711201R1017 1SAZ711201R1021 1SAZ711201R1023 1SAZ711201R1025 1SAZ711201R1028 1SAZ711201R1031 1SAZ711201R1033 1SAZ711201R1035 1SAZ711201R1038 1SAZ711201R1040 1SAZ711201R1043 1SAZ711201R1045 1SAZ711201R1047 CT-SDS... Ordering details - Main accessories Type Electronic timer* 28-48 V DC 24-240 V AC 380-440 V AC Order code Pkg qty Weight CT-SDS.22S 1SVR730210R3300 1 (1 pce) kg 0.114 CT-SDS.23S 1SVR730211R2300 1 0.118 * 7 time ranges (0.05 s - 10 min), 50 ms transition time, 2 n/o contacts, 3 LEDs ABB | 4/25 1SBC101281S0201 Setting ranges A ... A 0.10...0.13 0.13...0.17 0.17...0.23 0.23...0.31 0.31...0.41 0.41...0.55 0.55...0.74 0.74...1.00 1.00...1.30 1.30...1.70 1.70...2.30 2.30...3.10 3.10...4.20 4.20...5.70 5.70...7.60 7.60...10.0 10.0...13.0 13.0...16.0 Protected by thermal overload relays With AS, ASL contactors - open type version in kit form Main dimensions mm, inches Direct-on-line starters 72.5 2.85" 2x M4 8-32 UNC ø 4.2 0.17" 35 mm EN/IEC 60715 5 0.2" 35 1.38" 5 0.2" AC 17.3 0.68" ø 4.2 0.17" 60 2.36" 60 2.36" 128.5 5.06" 68 2.68" 5.5 0.22" 35 1.38" DC 5.3 0.21" 70.8 2.79" Reversing starters 2x M4 8-32 UNC 72.5 2.85" 10 0.39" 60 2.36" 7 0.28" ø 4.2 0.17" 136.5 5.37" 68 2.68" 5.5 0.22" AC 50 1.97" 67.3 2.65" 80 3.15" 17.3 0.68" 90 3.54" DC 60 2.36" 35 mm EN/IEC 60715 2x M4 8-32 UNC ø 4.2 5.3 0.21" 0.17" 70.8 2.79" 80 3.15" Star-delta starters 103.7 4.08" 157.5 6.2" 2x M4 8-32 UNC 72.5 2.85" 7 0.28" 50 1.97" 60 2.36" 5.5 68 2.68" 85.6 3.37" AC 136.5 5.37" ø 4.2 0.17" 0.22" 125 4.92" 2x M4 8-32 UNC 22.5 DC ø 4.2 5.3 0.21" 17.3 0.68" 0.17" 70.8 2.79" 125 4.92" 4/26 | ABB 1SBC101293S0201 0.89" 60 2.36" 5.9 0.23" 35 mm EN/IEC 60715 4 2x M4 8-32 UNC 10 0.39" 50 1.97" 7 0.28" 45 1.77" Notes N14 4 ABB | 4/27 Summary_4-2 4 4/28 | ABB 3-pole contactors and contactor relays with screw terminals 3-pole contactors Overview 4/30 AS09 ... AS16 AC operated 4/32 ASL09 ... ASL16 DC operated 4/33 AS09 ... AS16 AC operated - 2-stack 4/34 ASL09 ... ASL16 DC operated - 2-stack 4/35 Main accessories 4/36 Technical data 4/38 Electrical durability 4/44 Terminal marking and postioning 4/52 Dimensions 4/54 4 3-pole reversing contactors VAS09 ... VAS16 AC operated 4/46 VASL09 ... VASL16 DC operated 4/47 Technical data 4/48 Terminal marking and postioning 4/52 Dimensions 4/58 Contactor relays Overview 4/60 NS AC operated 4/62 NSL DC operated 4/63 Main accessories 4/64 Technical data 4/66 Terminal marking and positioning 4/70 Dimensions 4/72 Accessories Auxiliary contact blocks 4/74 Electronic timers 4/77 Surge suppressors 4/80 4/82 Connection accessories for starting solutions 4/83 Voltage code table 4/84 Summary_4-2 Mechanical interlock unit and other accessories ABB | 4/29 3-pole contactors Main accessories AS09 ... AS16 3-pole contactors 4 Main accessories for contactors RV5, RT5 or RC5-1 Surge suppressor CA-3 1-pole auxiliary contact block T16 Thermal overload relay Main accessories for starting solutions Direct-on-line starter Reversing starter Star-delta starter BEY16C-3 Connection set BER16C-3 Connection set Timer AS ASL Contactors AS ASL Contactors AS ASL Contactors VM3 Mechanical interlock unit T16 Thermal overload relay T16 Thermal overload relay 4/30 | ABB T16 Thermal overload relay 1SBC101292S0201 VM3 Mechanical interlock unit 3-pole contactors Screw terminals AC control voltage AS09 AS12 AS16 DC control voltage ASL09 ASL12 ASL16 4 Switching of 3-phase cage motors Rated operational power 33 M 3 Rated operational current 400 V 4 kW 5.5 kW 7.5 kW θ ≤ 60 °C 400 V 9A 12 A 15.5 A θ ≤ 60 °C 415 V 9A 12 A 15.5 A 5A 5 hp 7A 7.5 hp 9A 10 hp 00 00 0 IEC AC-3 UL / CSA 690 V θ ≤ 60 °C 440-480 V 3-phase motor rating NEMA size Protection of 3-phase motors T16... Thermal overload relays 0.10...0.13 0.23...0.31 0.55...0.74 1.30...1.70 3.10...4.20 7.60...10.0 0.13...0.17 0.31...0.41 0.74...1.00 1.70...2.30 4.20...5.70 10.0...13.0 0.17...0.23 0.41...0.55 1.00...1.30 2.30...3.10 5.70...7.60 13.0...16.0 Switching of resistive circuits θ ≤ 40 °C 690 V 22 A 24 A 24 A θ ≤ 60 °C 690 V 18 A 20 A 20 A 690 V θ ≤ 70 °C With conductor cross-sectional area 15 A 16 A 16 A 2.5 mm 2 20 A 2.5 mm 2 20 A 2.5 mm 2 20 A With conductor cross-sectional area AWG 12 AWG 12 AWG 12 Auxiliary contact blocks Front mounting 1-pole CA3-10 or CA3-01 Interlocks Mechanical VM3 Surge suppressors Side-mounted (without additional width) RV5 RC5-1 RT5 Connection sets Reversing starters Star-delta starters BER16C-3 BEY16C-3 Connecting link With manual motor starter BEA16-3 33 R R IEC UL / CSA AC-1 Rated operational current General use rating 600 V AC Main accessories 1SBC101292S0201 (Varistor) AC / DC (Capacitor) AC (Transil diode) DC ABB | 4/31 AS09 ... AS16 3-pole contactors 4 to 7.5 kW AC operated 1SBC101007F0014 Description AS09-30-10 4 AS09 ... AS16 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with: –– 3 main poles and 1 built-in auxiliary contact –– control circuit: AC operated –– add-on auxiliary contact blocks for front mounting and a comprehensive range of accessories. Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 22 5.5 7.5 24 24 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage use Uc rating (1) 600 V AC hp 5 A 20 7.5 20 10 20 V 50 Hz V 60 Hz 24 24 - 120 230 230 400 400 24 24 - 120 230 230 400 400 24 24 - 120 230 230 400 400 Auxiliary Type contacts fitted 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Order code Weight Pkg (1 pce) AS09-30-10-20 AS09-30-01-20 AS09-30-10-16 AS09-30-01-16 AS09-30-10-26 AS09-30-01-26 AS09-30-10-28 AS09-30-01-28 AS12-30-10-20 AS12-30-01-20 AS12-30-10-16 AS12-30-01-16 AS12-30-10-26 AS12-30-01-26 AS12-30-10-28 AS12-30-01-28 AS16-30-10-20 AS16-30-01-20 AS16-30-10-16 AS16-30-01-16 AS16-30-10-26 AS16-30-01-26 AS16-30-10-28 AS16-30-01-28 1SBL101001R2010 1SBL101001R2001 1SBL101001R1610 1SBL101001R1601 1SBL101001R2610 1SBL101001R2601 1SBL101001R2810 1SBL101001R2801 1SBL111001R2010 1SBL111001R2001 1SBL111001R1610 1SBL111001R1601 1SBL111001R2610 1SBL111001R2601 1SBL111001R2810 1SBL111001R2801 1SBL121001R2010 1SBL121001R2001 1SBL121001R1610 1SBL121001R1601 1SBL121001R2610 1SBL121001R2601 1SBL121001R2810 1SBL121001R2801 kg 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. mm, inches 72.5 2.85" 4/32 | ABB 2x M4 8-32 UNC 50 1.97" 35 mm EN/IEC 60715 68 2.68" AS09, AS12, AS16 5.5 0.22" 10 0.39" 60 2.36" 7 0.28" 45 1.77" 35 1.38" ø 4.2 0.17" 1SBC101301S0201 Main dimensions ASL09 ... ASL16 3-pole contactors 4 to 7.5 kW DC operated Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 22 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage use Uc rating (1) 600 V AC hp 5 A 20 V DC 24 48 110 220 5.5 24 7.5 20 24 48 110 220 7.5 24 10 20 24 48 110 220 Auxiliary Type contacts fitted Order code Weight 4 Pkg (1 pce) kg 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 ASL09-30-10-81 ASL09-30-01-81 ASL09-30-10-83 ASL09-30-01-83 ASL09-30-10-86 ASL09-30-01-86 ASL09-30-10-88 ASL09-30-01-88 ASL12-30-10-81 ASL12-30-01-81 ASL12-30-10-83 ASL12-30-01-83 ASL12-30-10-86 ASL12-30-01-86 ASL12-30-10-88 ASL12-30-01-88 ASL16-30-10-81 ASL16-30-01-81 ASL16-30-10-83 ASL16-30-01-83 ASL16-30-10-86 ASL16-30-01-86 ASL16-30-10-88 ASL16-30-01-88 1SBL103001R8110 1SBL103001R8101 1SBL103001R8310 1SBL103001R8301 1SBL103001R8610 1SBL103001R8601 1SBL103001R8810 1SBL103001R8801 1SBL113001R8110 1SBL113001R8101 1SBL113001R8310 1SBL113001R8301 1SBL113001R8610 1SBL113001R8601 1SBL113001R8810 1SBL113001R8801 1SBL123001R8110 1SBL123001R8101 1SBL123001R8310 1SBL123001R8301 1SBL123001R8610 1SBL123001R8601 1SBL123001R8810 1SBL123001R8801 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. mm, inches 72.5 2.85" 5.5 0.22" 10 0.39" 2x M4 8-32 UNC 35 1.38" ø 4.2 0.17" 60 2.36" 7 0.28" 45 1.77" 1SBC101302S0201 Main dimensions 35 mm EN/IEC 60715 ASL09-30-10 ASL09 ... ASL16 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with: –– 3 main poles and 1 built-in auxiliary contact –– control circuit: low consumption (3 W at pull-in and holding) DC operated with solid core magnet. Suitable for direct control by PLC outputs (the polarity on the coil terminals A1+ and A2- must be respected) –– add-on auxiliary contact blocks for front mounting and a comprehensive range of accessories. 68 2.68" 1SBC101010F0014 Description ASL09, ASL12, ASL16 ABB | 4/33 AS09 ... AS16 2-stack 3-pole contactors 4 to 7.5 kW AC operated 1SBC101332F0014 Description AS09-30-32 4 AS09 ... AS16 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with: –– 1st stack with 3 main poles and 1 N.O. built-in auxiliary contact –– 2nd stack with permanently fixed 2 N.O. + 2 N.C. auxiliary contact block. The auxiliary contact elements are mechanically linked (side-marked symbol) and the N.C. auxiliary contacts are mirror contacts –– control circuit: AC operated –– a comprehensive range of accessories. Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 22 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage use Uc rating (1) 600 V AC hp 5 A 20 5.5 24 7.5 20 7.5 24 10 20 V 50 Hz V 60 Hz 24 230 400 24 230 400 24 230 400 24 120 230 400 24 120 230 400 24 120 230 400 Auxiliary Type contacts fitted 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 AS09-30-32-20 AS09-30-32-16 AS09-30-32-26 AS09-30-32-28 AS12-30-32-20 AS12-30-32-16 AS12-30-32-26 AS12-30-32-28 AS16-30-32-20 AS16-30-32-16 AS16-30-32-26 AS16-30-32-28 Order code Weight Pkg (1 pce) 1SBL101001R2032 1SBL101001R1632 1SBL101001R2632 1SBL101001R2832 1SBL111001R2032 1SBL111001R1632 1SBL111001R2632 1SBL111001R2832 1SBL121001R2032 1SBL121001R1632 1SBL121001R2632 1SBL121001R2832 kg 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. Main dimensions mm, inches 100.2 3.94" 72.5 2.85" 4/34 | ABB 44.2 1.74" 5.5 0.22" 1SBC101303S0201 AS09, AS12, AS16 7 0.28" 35 mm EN/IEC 60715 68 2.68" 45 1.77" ASL09 ... ASL16 2-stack 3-pole contactors 4 to 7.5 kW DC operated Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 22 UL/CSA 3-phase motor rating 480 V General use rating 600 V AC hp 5 A 20 5.5 24 7.5 20 7.5 24 10 20 Rated control circuit voltage Uc (1) Auxiliary Type contacts fitted Order code 4 Weight Pkg (1 pce) kg V DC 24 48 110 220 24 48 110 220 24 48 110 220 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 ASL09-30-32-81 ASL09-30-32-83 ASL09-30-32-86 ASL09-30-32-88 ASL12-30-32-81 ASL12-30-32-83 ASL12-30-32-86 ASL12-30-32-88 ASL16-30-32-81 ASL16-30-32-83 ASL16-30-32-86 ASL16-30-32-88 1SBL103001R8132 1SBL103001R8332 1SBL103001R8632 1SBL103001R8832 1SBL113001R8132 1SBL113001R8332 1SBL113001R8632 1SBL113001R8832 1SBL123001R8132 1SBL123001R8332 1SBL123001R8632 1SBL123001R8832 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. Main dimensions mm, inches 100.2 3.94" 5.5 0.22" 10 0.39" 1SBC101453S0201 7 0.28" 44.2 1.74" 72.5 2.85" 45 1.77" 35 mm EN/IEC 60715 ASL09-30-32 ASL09 ... ASL16 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with: –– 1st stack with 3 main poles and 1 N.O. built-in auxiliary contact –– 2nd stack with permanently fixed 2 N.O. + 2 N.C. auxiliary contact block. The auxiliary contact elements are mechanically linked (side-marked symbol) and the N.C. auxiliary contacts are mirror contacts –– control circuit: low consumption (3 W at pull-in and holding) DC operated with solid core magnet. Suitable for direct control by PLC outputs (the polarity on the coil terminals A1+ and A2- must be respected) –– a comprehensive range of accessories. 68 2.68" 1SBC101334F0014 Description ASL09, ASL12, ASL16 ABB | 4/35 AS09 ... AS16 and ASL09 ... ASL16 3-pole contactors Main accessories Contactor and main accessories (other accessories available) BEY16C-3 VM3 (optional) BER16C-3 MS116 4 VM3 AS ASL Contactors BEA16-3 AS ASL Contactors RV5, RC5-1 or RT5 T16 AS ASL Contactors T16 TEF3 CA3 Main accessory fitting details Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor types Main poles Built-in Front-mounted accessories auxiliary Auxiliary contact blocks contacts AS09 ... AS16 3 3 3 3 3 3 1 0 3 1 0 3 1-pole CA3 AS09 ... AS16 ASL09 ... ASL16 ASL09 ... ASL16 0 0 0 0 0 0 0 1 2 0 1 2 Side-mounted accessories Electronic timer Mechanical interlock unit (between 2 contactors) TEF3 VM3 Surge suppressors 2 max. or 1 + 1 + RV5 or RC5-1 – 2 max. – or 1 + 1 1 + + RV5 RV5 or RC5-1 or RT5 1 + RV5 or RT5 – – Overload relays fitting details (1) Contactor types AS09 … AS16 ASL09 … ASL16 Thermal overload relays T16 (0.10...16 A) 1SBC101297S0201 The addition of an overload relay on the contactor does not prevent fitting of many other accessories as shown above. (1) Direct mounting - No kit required. 4/36 | ABB AS09 ... AS16 and ASL09 ... ASL16 3-pole contactors Main accessories Front-mounted instantaneous auxiliary contact blocks 1SBC101036F0014 For contactors Auxiliary Type contacts Order code Pkg qty Weight (1 pce) CA3-10 CA3-01 1SBN011010T1010 1SBN011010T1001 10 10 kg 0.011 0.011 Rated control circuit voltage - Uc V Type Order code Pkg qty Weight (1 pce) kg ON-delay AS09 … AS16, ASL09 … ASL16 24...240 V AC/DC TEF3-ON 1SBN021012R1000 1 0.065 OFF-delay AS09 … AS16, ASL09 … ASL16 24...240 V AC/DC TEF3-OFF 1SBN021014R1000 1 0.065 For contactors Type Order code Pkg qty AS09 … AS16, ASL09 … ASL16 VM3 1SBN031005T1000 10 Weight (1 pce) kg 0.002 Type Order code Pkg qty Weight (1 pce) RV5/50 RV5/133 RV5/250 RV5/440 RC5-1/50 RC5-1/133 RC5-1/250 RC5-1/440 RT5/32 RT5/65 RT5/90 RT5/150 RT5/264 1SBN050010R1000 1SBN050010R1001 1SBN050010R1002 1SBN050010R1003 1SBN050100R1000 1SBN050100R1001 1SBN050100R1002 1SBN050100R1003 1SBN050020R1000 1SBN050020R1001 1SBN050020R1002 1SBN050020R1003 1SBN050020R1004 2 2 2 2 2 2 2 2 2 2 2 2 2 kg 0.015 0.015 0.015 0.015 0.012 0.012 0.012 0.012 0.015 0.015 0.015 0.015 0.015 Order code Pkg qty 1SBN081006T1000 10 AS09 … AS16 ASL09 … ASL16 CA3-10 1 0 0 1 Front-mounted electronic timer 1SBC101337F0014 For contactors 1SBC101069F0014 TEF3-ON 4 Mechanical interlock unit 1SBC574001F0301 VM3 RV5 Surge suppressors For contactors AS09 ... AS16, ASL09 ... ASL16 1SBC101034F0014 AS09 ... AS16 ASL09 ... ASL16 BEA16-3 Rated control circuit voltage - Uc V 24...50 50...133 110...250 250...440 24...50 50...133 110...250 250...440 12...32 25...65 50...90 77...150 150...264 AC ● ● ● ● ● ● ● ● – – – – – DC ● ● ● ● – – – – ● ● ● ● ● 1SBC101071F0014 Connecting links with manual motor starters For contactors Manual motor starter Type AS09 … AS16 ASL09 … ASL16 MS116-0.16 ... MS116-16 BEA16-3 MS132-0.16 ... MS132-16 Weight (1 pce) kg 0.019 Connection sets for reversing contactors BER16C-3 For contactors Mechanical interlock unit Type Order code Pkg qty AS09 … AS16, ASL09 … ASL16 with or without VM3 BER16C-3 1SBN081012R1000 1 Weight (1 pce) kg 0.035 BEY16C-3 Connection sets for star-delta starting For contactors Mech. interlock unit between Star & Delta contactors Type Order code Pkg qty Weight (1 pce) AS09 … AS12, ASL09 … ASL12 with or without VM3 BEY16C-3 1SBN081018R2000 1 kg 0.041 Note: BEY16C-3 connection set includes two BB3 fixing clips, and an electrical interlocking when fitted on Star and Delta contactors with built-in N.C. auxiliary contacts. BEY16C-3 can be used with or without VM3 mechanical interlock unit. ABB | 4/37 1SBC101297S0201 1SBC101070F0014 Note: BER16C-3 connection set includes two BB3 fixing clips, and an electrical interlocking when fitted on contactors with built-in N.C. auxiliary contacts. BER16C-3 can be used with or without VM3 mechanical interlock unit. AS09 ... AS16 and ASL09 ... ASL16 3-pole contactors Technical data Main pole - Utilization characteristics according to IEC Contactor types AS09 AS12 ASL09 ASL12 IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 690 V 50 / 60 Hz AS16 ASL16 22 A 2.5 mm² 25 A 4 mm² 25 A 4 mm² 22 A 18 A 15 A 2.5 mm² 24 A 20 A 16 A 24 A 20 A 16 A 220-230-240 V 400 V 415 V 440 V 500 V 690 V 9 9 9 8 8 5 12 A 12 A 12 A 11 A 11 A 7A 15.7 15.5 15.5 13.6 12.5 9A 220-230-240 V 400 V 415 V 440 V 500 V 690 V 2.2 kW 3 kW 4 kW 5.5 kW 4 kW 5.5 kW 4 kW 5.5 kW 4 kW 5.5 kW 4 kW 5.5 kW 10 x Ie AC-3 acc. to IEC 60947-4-1 8 x Ie AC-3 acc. to IEC 60947-4-1 4 kW 7.5 kW 7.5 kW 7.5 kW 7.5 kW 7.5 kW 12 A 5.5 kW 16 A 7.5 kW 22 A 11 kW 25 A 230 A 100 A 65 A 50 A 22 A 250 A 124 A 75 A 55 A 24 A 250 A 124 A 75 A 55 A 24 A 1.2 W 0.3 W 1.2 W 0.5 W AC operated DC operated Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C Ue max. ≤ 690 V, 50/60 Hz θ ≤ 40 °C θ ≤ 60 °C θ ≤ 70 °C With conductor cross-sectional area AC-3 Utilization category For air temperature close to contactor θ ≤ 60 °C Ie / Max. rated operational current AC-3 (1) M 3 3-phase motors A A A A A A A A A A A Rated operational power AC-3 (1) M 3 1500 r.p.m. 50 Hz 1800 r.p.m. 60 Hz 3-phase motors Rated making capacity AC-3 Rated breaking capacity AC-3 AC-8a Utilization category (without thermal overload relay - Ue 400 V 50/60 Hz - θ ≤ 40 °C) Ie / Rated operational current AC-8a Rated operational power AC-8a Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded (2) Ue ≤ 500 V AC - gG type fuse Rated short-time withstand current Icw at 40 °C ambient temperature, in free air from a cold state Maximum breaking capacity cos φ = 0.45 Power dissipation per pole Max. electrical switching frequency 1s 10 s 30 s 1 min 15 min at 440 V at 690 V Ie / AC-1 Ie / AC-3 AC-1 AC-3 AC-4 155 A 90 A 1W 0.16 W 600 cycles/h 1200 cycles/h 300 cycles/h (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". (2) For the protection of motor starters against short circuits, see "Coordination with short-circuit protection devices". 1SBC101489S0201 4 With conductor cross-sectional area AC-1 Utilization category For air temperature close to contactor Ie / Rated operational current AC-1 4/38 | ABB AS09 ... AS16 and ASL09 ... ASL16 3-pole contactors Technical data Main pole - Utilization characteristics according to UL / NEMA / CSA Contactor types AC operated DC operated Standards Max. operational voltage NEMA size Thermal current NEMA continuous amp rating 115 V AC NEMA maximum horse power ratings 1-phase, 60 Hz 230 V AC 200 V AC 230 V AC 460 V AC 575 V AC NEMA maximum horse power ratings 3-phase, 60 Hz UL / CSA general use rating 600 V AC With conductor cross-sectional area UL / CSA maximum 1-phase motor rating Full load current 120 V AC 240 V AC 120 V AC 240 V AC Horse power rating UL / CSA maximum 3-phase motor rating Full load current (1) Horse power rating (1) 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC AS09 ASL09 UL 508, CSA C22.2 N°14 690 V 00 9A 1/3 hp 1 hp 1 1/2 hp 1 1/2 hp 2 hp 2 hp AS12 ASL12 AS16 ASL16 00 9A 1/3 hp 1 hp 1 1/2 hp 1 1/2 hp 2 hp 2 hp 0 18 A 1 hp 2 hp 3 hp 3 hp 5 hp 5 hp 20 A AWG 12 20 A AWG 12 20 A AWG 12 7.2 A 8A 1/3 hp 1 hp 9.8 A 10 A 1/2 hp 1-1/2 hp 13.8 A 12 A 3/4 hp 2 hp 7.8 A 6.8 A 7.6 A 9A 2 hp 2 hp 5 hp 7-1/2 hp 7.8 A 9.6 A 11 A 11 A 2 hp 3 hp 7-1/2 hp 10 hp 11 A 15.2 A 14 A 11 A 3 hp 5 hp 10 hp 10 hp 40 A J 50 A 60 A 4 Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded Fuse rating Fuse type, 600 V Max. electrical switching frequency For general use For motor use 600 cycles/h 1200 cycles/h (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". General technical data AC operated DC operated Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Ambient air temperature close to contactor Operation Fitted with thermal overload relay Without thermal overload relay Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency Shock withstand acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 A A C1 B1 B2 C2 Vibration withstand acc. to IEC 60068-2-6 Shock direction A B1 B2 C1 C2 AS09 ASL09 AS12 ASL12 AS16 ASL16 690 V 600 V 6 kV -25...+60 °C -40...+70 °C -60...+80 °C Category B according to IEC 60947-1 Annex Q 3000 m 10 millions operating cycles 3600 cycles/h 1/2 sinusoidal shock for 11 ms: no change in contact position, closed or open position AS contactors - AC operated ASL contactors - DC operated 20 g 20 g closed position / 10 g open position 10 g closed position / 5 g open position 15 g closed position / 5 g open position 15 g 10 g 20 g closed position / 9 g open position 15 g closed position / 8 g open position 20 g closed position / 14 g open position 14 g closed position / 8 g open position 5...300 Hz / 3 g closed position / 2 g open position ABB | 4/39 1SBC101489S0201 Contactor types AS09 ... AS16 and ASL09 ... ASL16 3-pole contactors Technical data Magnet system characteristics for AS09 … AS16 contactors Contactor types Coil operating limits AC operated AC supply acc. to IEC 60947-4-1 AC control voltage Rated control circuit voltage Uc at 50 Hz at 60 Hz Coil consumption Average pull-in value 50 Hz 60 Hz 50/60 Hz Average holding value 50 Hz 60 Hz 50/60 Hz 4 Drop-out voltage Operating time Between coil energization and: Between coil de-energization and: N.O. contact closing N.C. contact opening N.O. contact opening (1) N.C. contact closing (1) AS09 AS12 AS16 0.85...1.1 x Uc (at θ ≤ 60 °C); Uc (at θ ≤ 70 °C) 24...415 V 24...415 V 33 VA 33 VA 33 VA 6.5 VA / 1.5 W 5 VA / 1.2 W 6.5 VA / 1.5 W Approx. 30...50 % of Uc 9...24 ms 6...18 ms 5...19 ms 7...22 ms (1) The use of RC5-1 surge suppressor increases opening time by a factor of 2 to 3 Magnet system characteristics for ASL09 … ASL16 contactors Contactor types Coil operating limits acc. to IEC 60947-4-1 DC control voltage Drop-out voltage Coil time constant DC operated DC supply ASL09 ASL12 ASL16 0.85...1.1 x Uc (at θ ≤ 60 °C); Uc (at θ ≤ 70 °C) Rated control circuit voltage Uc 12...240 V DC Average pull-in value 3 W Coil consumption Average holding value 3 W Approx. 10...40 % of Uc L/R 12 ms Open L/R 40 ms Closed Operating time Between coil energization and: Between coil de-energization and: N.O. contact closing N.C. contact opening N.O. contact opening (1) N.C. contact closing (1) 36...59 ms 31...53 ms 13...17 ms 15...20 ms (1) The use of RT5 surge suppressor increases opening time by a factor of 1.1 to 1.2 Mounting characteristics and conditions for use Contactor types AC operated DC operated AS09 ASL09 Mounting positions AS12 ASL12 Pos. 2 +30° AS16 ASL16 -30° Pos. 4 Pos. 3 Pos. 1 Pos. 5 The contactors can be assembled side by side. 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally 1SBC101489S0201 Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) Pos. 1 ± 30° 4/40 | ABB AS09 ... AS16 and ASL09 ... ASL16 3-pole contactors Technical data Connecting characteristics Contactor types AC operated DC operated AS09 ASL09 AS12 ASL12 AS16 ASL16 Main terminals Screw terminals with cable clamp Connection capacity (min. ... max.) Main conductors (poles) Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule l L Bars or lugs Connection capacity acc. to UL / CSA Stripping length Tightening torque Recommended Max. Auxiliary conductors (built-in auxiliary terminals + coil terminals) Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule l L Lugs Connection capacity acc. to UL / CSA Stripping length Tightening torque Coil terminals Recommended Max. Built-in auxiliary terminals Recommended Max. Degree of protection 1x 2x 1x 2x 1x 2x L≤ l> 1 or 2 x 0.75...4 mm² 0.75...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 7.7 mm 3.2 mm AWG 18...12 9 mm 1.00 Nm / 9 lb.in 1.20 Nm 1x 2x 1x 2x 1x 2x L≤ l> 1 or 2 x 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 7.7 mm 3.2 mm AWG 18...14 1.00 1.20 1.00 1.20 4 Nm / 9 lb.in Nm Nm / 9 lb.in Nm acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 IP20 Delivered in open position, screws of unused terminals must be tightened M3 Screwdriver type Flat Ø 5.5 / Pozidriv 2 1SBC101489S0201 All terminals Screw terminals All terminals ABB | 4/41 AS09 ... AS16 and ASL09 ... ASL16 3-pole contactors Technical data Built-in auxiliary contacts according to IEC Contactor types AC operated DC operated Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 Making capacity AC-15 Breaking capacity AC-15 Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Non-overlapping time between N.O. and N.C. contacts Power dissipation per pole at 6 A Max. electrical switching frequency 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC for 1.0 s for 0.1 s AC-15 DC-13 Mechanically linked contacts acc. to annex L of IEC 60947-5-1 AS12 ASL12 AS16 ASL16 6A 4A 3A 2A 2A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.27 A / 60 W 0.27 A / 68 W 10 A 100 A 140 A 12 V / 3 mA 10-7 1.5 ms 0.1 W 1200 cycles/h 900 cycles/h Built-in N.O. or N.C. auxiliary contacts and additional N.O. or N.C. auxiliary contacts (CA3 aux. contact blocks) are mechanically linked contacts. Built-in N.C. auxiliary contacts or additional N.C. auxiliary contacts (CA3 aux. contact blocks) are mirror contacts. Mirror contacts acc. to annex F of IEC 60947-4-1 Built-in auxiliary contacts according to UL / CSA Contactor types Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking AC operated DC operated AS09 ASL09 600 V AC, 250 V DC A600, Q300 10 A 7200 VA 720 VA 2.5 A 69 VA AS12 ASL12 AS16 ASL16 1SBC101489S0201 4 24-127 V 50/60 Hz 220-240 V 50/60 Hz 400-440 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz AS09 ASL09 690 V 50 / 60 Hz 10 A 4/42 | ABB Notes N15 4 ABB | 4/43 AS09 ... AS16 and ASL09 ... ASL16 3-pole contactors Electrical durability AS L0 A 9 AS S12 16 , A , A SL SL 12 16 , A AS SL0 16 9, , A AS SL 12 16 , A 4 3 2 1 3 5 7 9 1 0.6 0.5 0.3 0.2 9 7 5 3 1 9 7 9 7 5 3 1 5 3 0.1 1 3 5 7 9 1 2 3 5 9 10 20 30 Breaking current Ic (A) Example: Breaking current = 9 A. On the opposite curve at intersection " " 9 A the corresponding value for the electrical durability is approximately 0.6 millions operating cycles. 1SBC101931S0201 4 AS Millions of operating cycles 09 SL 12 , Electrical durability for AC-1 utilization category - Ue ≤ 690 V Note: AC-1 maximum current is selected according to ambient temperature. Please see technical data. Switching non-inductive or slightly inductive loads. The breaking current Ic for AC-1 is equal to the rated operational current of the load. Maximum electrical switching frequency: 600 cycles / hour. 4/44 | ABB AS09 ... AS16 and ASL09 ... ASL16 3-pole contactors Electrical durability AS Millions of operating cycles 09 AS , A 12 SL , A 09 SL AS 12 16 ,A SL 16 Electrical durability for AC-3 utilization category - Ue ≤ 440 V - Ambient temperature ≤ 60 °C Switching cage motors: starting and switching off running motors. The breaking current Ic for AC-3 is equal to the rated operational current Ie (Ie = motor full load current). Maximum electrical switching frequency: 1200 cycles / hour. 10 4 5 3 9 7 5 3 1 2 9 7 5 3 1 1 0.5 0.3 0.2 1 2 3 4 5 10 3 5 7 9 20 Breaking current Ic (A) 1SBC101930S0201 Example: Breaking current = 4 A. On the opposite curve at intersection " " 4 A the corresponding value for the electrical durability is approximately 3 millions operating cycles. ABB | 4/45 VAS09 ... VAS16 3-pole reversing contactors 4 to 7.5 kW AC operated 1SBC101080F0014 Description VAS09 ... VAS16 reversing contactors are used for controlling 3-phase motors up to 690 V AC. These reversing contactors include 2 AS09 ... AS16 contactors fitted with 1 N.C. auxiliary contact, 1 VM3 mechanical interlock and BER16C-3 reversing connection set including electrical interlocking. Up to 2 add-on CA3 1-pole auxiliary contact blocks can be mounted per contactor. The reversing contactors are available with or without surge suppressor mounted on each contactor. Ordering details VAS09EM 4 IEC Rated operational power 400 V AC-3 kW UL/CSA 3-phase motor rating 480 V Rated control circuit voltage Uc (1) hp V 50 Hz Auxiliary Type contacts fitted Order code Pkg qty V 60 Hz Weight (1 pce) kg Reversing contactors without integrated surge suppressor 4 5 24 24 0 2 VAS09EM-20M 120 0 2 VAS09EM-16M 230 230 0 2 VAS09EM-26M 400 400 0 2 VAS09EM-28M 5.5 7.5 24 24 0 2 VAS12EM-20M 120 0 2 VAS12EM-16M 230 230 0 2 VAS12EM-26M 400 400 0 2 VAS12EM-28M 7.5 10 24 24 0 2 VAS16EM-20M 120 0 2 VAS16EM-16M 230 230 0 2 VAS16EM-26M 400 400 0 2 VAS16EM-28M 1SBK103600M2000 1SBK103600M1600 1SBK103600M2600 1SBK103600M2800 1SBK113600M2000 1SBK113600M1600 1SBK113600M2600 1SBK113600M2800 1SBK123600M2000 1SBK123600M1600 1SBK123600M2600 1SBK123600M2800 18 18 18 18 18 18 18 18 18 18 18 18 0.480 0.480 0.480 0.480 0.480 0.480 0.480 0.480 0.480 0.480 0.480 0.480 Reversing contactors with RC5-1 integrated surge suppressor 4 5 24 24 0 2 VAS09SEM-20M 120 0 2 VAS09SEM-16M 230 230 0 2 VAS09SEM-26M 400 400 0 2 VAS09SEM-28M 5.5 7.5 24 24 0 2 VAS12SEM-20M 120 0 2 VAS12SEM-16M 230 230 0 2 VAS12SEM-26M 400 400 0 2 VAS12SEM-28M 7.5 10 24 24 0 2 VAS16SEM-20M 120 0 2 VAS16SEM-16M 230 230 0 2 VAS16SEM-26M 400 400 0 2 VAS16SEM-28M 1SBK103800M2000 1SBK103800M1600 1SBK103800M2600 1SBK103800M2800 1SBK113800M2000 1SBK113800M1600 1SBK113800M2600 1SBK113800M2800 1SBK123800M2000 1SBK123800M1600 1SBK123800M2600 1SBK123800M2800 18 18 18 18 18 18 18 18 18 18 18 18 0.510 0.510 0.510 0.510 0.510 0.510 0.510 0.510 0.510 0.510 0.510 0.510 (1) Other control voltages see voltage code table. Note: Minimum switchover delay of 50 ms must be introduced between respective opening and closing of AC operated reversing contactors. mm, inches 72.5 2.85" 4/46 | ABB 35 mm EN/IEC 60715 5.5 0.22" 10 0.39" 2x M4 8-32 UNC 80 3.15" ø 4.2 0.17" 1SBC101462S0201 VAS09, VAS12, VAS16 68 2.68" 78.5 3.09" 7 0.28" 50 1.97" 90 3.54" 60 2.36" Main dimensions VASL09 ... VASL16 3-pole reversing contactors 4 to 7.5 kW DC operated 1SBC101082F0014 Description VASL09 ... VASL16 reversing contactors are used for controlling 3-phase motors up to 690 V AC. These reversing contactors include 2 ASL09 ... ASL16 contactors fitted with 1 N.C. auxiliary contact, 1 VM3 mechanical interlock and BER16C-3 reversing connection set including electrical interlocking. Up to 2 add-on CA3 1-pole auxiliary contact blocks can be mounted per contactor. The reversing contactors are available with or without surge suppressor mounted on each contactor. Ordering details IEC Rated operational power 400 V AC-3 kW UL/CSA 3-phase motor rating 480 V Rated control circuit voltage Uc (1) hp V DC Auxiliary Type contacts fitted Order code Pkg qty Weight (1 pce) 4 kg Reversing contactors without integrated surge suppressor 4 5 24 0 2 VASL09EM-81M 48 0 2 VASL09EM-83M 110 0 2 VASL09EM-86M 220 0 2 VASL09EM-88M 5.5 7.5 24 0 2 VASL12EM-81M 48 0 2 VASL12EM-83M 110 0 2 VASL12EM-86M 220 0 2 VASL12EM-88M 7.5 10 24 0 2 VASL16EM-81M 48 0 2 VASL16EM-83M 110 0 2 VASL16EM-86M 220 0 2 VASL16EM-88M 1SBK103700M8100 1SBK103700M8300 1SBK103700M8600 1SBK103700M8800 1SBK113700M8100 1SBK113700M8300 1SBK113700M8600 1SBK113700M8800 1SBK123700M8100 1SBK123700M8300 1SBK123700M8600 1SBK123700M8800 18 18 18 18 18 18 18 18 18 18 18 18 0.600 0.600 0.600 0.600 0.600 0.600 0.600 0.600 0.600 0.600 0.600 0.600 Reversing contactors with RV5 integrated surge suppressor 4 5 24 0 2 VASL09SEM-81M 48 0 2 VASL09SEM-83M 110 0 2 VASL09SEM-86M 220 0 2 VASL09SEM-88M 5.5 7.5 24 0 2 VASL12SEM-81M 48 0 2 VASL12SEM-83M 110 0 2 VASL12SEM-86M 220 0 2 VASL12SEM-88M 7.5 10 24 0 2 VASL16SEM-81M 48 0 2 VASL16SEM-83M 110 0 2 VASL16SEM-86M 220 0 2 VASL16SEM-88M 1SBK103900M8100 1SBK103900M8300 1SBK103900M8600 1SBK103900M8800 1SBK113900M8100 1SBK113900M8300 1SBK113900M8600 1SBK113900M8800 1SBK123900M8100 1SBK123900M8300 1SBK123900M8600 1SBK123900M8800 18 18 18 18 18 18 18 18 18 18 18 18 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 0.630 (1) Other control voltages see voltage code table. mm, inches 72.5 2.85" 35 mm EN/IEC 60715 68 2.68" 7 0.28" 5.5 0.22" 10 0.39" 2x M4 8-32 UNC 80 3.15" ø 4.2 0.17" 1SBC101473S0201 90 3.54" 60 2.36" Main dimensions 78.5 3.09" VASL09EM VASL09, VASL12, VASL16 ABB | 4/47 VAS09 ... VAS16 and VASL09 ... VASL16 3-pole reversing contactors Technical data Main pole - Utilization characteristics according to IEC Contactor types VAS09 VAS12 VASL09 VASL12 IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 690 V 50 / 60 Hz VAS16 VASL16 22 A 2.5 mm² 25 A 4 mm² 25 A 4 mm² 220-230-240 V 400 V 415 V 440 V 500 V 690 V 9 9 9 8 8 5 12 A 12 A 12 A 11 A 11 A 7A 15.7 15.5 15.5 13.6 12.5 9A 220-230-240 V 400 V 415 V 440 V 500 V 690 V 2.2 kW 3 kW 4 kW 5.5 kW 4 kW 5.5 kW 4 kW 5.5 kW 4 kW 5.5 kW 4 kW 5.5 kW 10 x Ie AC-3 acc. to IEC 60947-4-1 8 x Ie AC-3 acc. to IEC 60947-4-1 AC operated DC operated Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C M 3 3-phase motors A A A A A A A A A A A Rated operational power AC-3 (1) M 3 1500 r.p.m. 50 Hz 1800 r.p.m. 60 Hz 3-phase motors Rated making capacity AC-3 Rated breaking capacity AC-3 Short-circuit protection device for contactors 4 kW 7.5 kW 7.5 kW 7.5 kW 7.5 kW 7.5 kW without thermal overload relay - Motor protection excluded (2) Ue ≤ 500 V AC - gG type fuse Rated short-time withstand current Icw at 40 °C ambient temperature, in free air from a cold state Maximum breaking capacity cos φ = 0.45 25 A 230 A 100 A 65 A 1 min 50 A 15 min 22 A 1s 10 s 30 s at 440 V at 690 V 250 A 124 A 75 A 55 A 24 A 250 A 124 A 75 A 55 A 24 A 0.3 W 0.5 W 155 A 90 A Power dissipation per pole Max. electrical switching frequency Ie / AC-3 AC-3 0.16 W 600 cycles/h (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". (2) For the protection of motor starters against short circuits, see "Coordination with short-circuit protection devices". 1SBC101500S0201 4 With conductor cross-sectional area AC-3 Utilization category For air temperature close to contactor θ ≤ 60 °C Ie / Max. rated operational current AC-3 (1) 4/48 | ABB VAS09 ... VAS16 and VASL09 ... VASL16 3-pole reversing contactors Technical data Main pole - Utilization characteristics according to UL / NEMA / CSA Contactor types VAS12 VASL12 VAS16 VASL16 230 V AC 200 V AC 230 V AC 460 V AC 575 V AC VAS09 VASL09 UL 508, CSA C22.2 N°14 690 V 00 9A 1/3 hp 1 hp 1 1/2 hp 1 1/2 hp 2 hp 2 hp 00 9A 1/3 hp 1 hp 1 1/2 hp 1 1/2 hp 2 hp 2 hp 0 18 A 1 hp 2 hp 3 hp 3 hp 5 hp 5 hp 120 V AC 240 V AC 120 V AC 240 V AC 7.2 A 8A 1/3 hp 1 hp 9.8 A 10 A 1/2 hp 1-1/2 hp 13.8 A 12 A 3/4 hp 2 hp 7.8 A 6.8 A 7.6 A 9A 2 hp 2 hp 5 hp 7-1/2 hp 7.8 A 9.6 A 11 A 11 A 2 hp 3 hp 7-1/2 hp 10 hp 11 A 15.2 A 14 A 11 A 3 hp 5 hp 10 hp 10 hp 40 A J 50 A 60 A AC operated DC operated Standards Max. operational voltage NEMA size Thermal current NEMA continuous amp rating 115 V AC NEMA maximum horse power ratings 1-phase, 60 Hz NEMA maximum horse power ratings 3-phase, 60 Hz UL / CSA maximum 1-phase motor rating Full load current Horse power rating UL / CSA maximum 3-phase motor rating Full load current (1) Horse power rating (1) 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC 4 Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded Fuse rating Fuse type, 600 V Max. electrical switching frequency For motor use 600 cycles/h (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". General technical data AC operated DC operated Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Ambient air temperature close to contactor Operation Fitted with thermal overload relay Without thermal overload relay Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency VAS09 VASL09 VAS12 VASL12 VAS16 VASL16 690 V 600 V 6 kV -25...+60 °C -40...+70 °C -60...+80 °C Category B according to IEC 60947-1 Annex Q 3000 m 5 millions operating cycles 1800 cycles/h 1SBC101500S0201 Contactor types ABB | 4/49 VAS09 ... VAS16 and VASL09 ... VASL16 3-pole reversing contactors Technical data Magnet system characteristics for VAS09 … VAS16 contactors Contactor types Coil operating limits AC operated acc. to IEC 60947-4-1 AC control voltage Rated control circuit voltage Uc at 50 Hz at 60 Hz Coil consumption Average pull-in value 50 Hz 60 Hz 50/60 Hz Average holding value 50 Hz 60 Hz 50/60 Hz 4 VAS09 VAS12 VAS16 AC supply Drop-out voltage Operating time Between coil energization and: Between coil de-energization and: N.O. contact closing N.C. contact opening N.O. contact opening (1) N.C. contact closing (1) 0.85...1.1 x Uc (at θ ≤ 60 °C); Uc (at θ ≤ 70 °C) 24...415 V 24...415 V 33 VA 33 VA 33 VA 6.5 VA / 1.5 W 5 VA / 1.2 W 6.5 VA / 1.5 W Approx. 30...50 % of Uc 9...24 ms 6...18 ms 5...19 ms 7...22 ms (1) The use of RC5-1 surge suppressor increases opening time by a factor of 2 to 3. Magnet system characteristics for VASL09 … VASL16 contactors Contactor types Coil operating limits acc. to IEC 60947-4-1 DC control voltage Drop-out voltage Coil time constant DC operated VASL09 VASL12 VASL16 DC supply 0.85...1.1 x Uc (at θ ≤ 60 °C); Uc (at θ ≤ 70 °C) Rated control circuit voltage Uc 12...240 V DC Average pull-in value 3 W Coil consumption Average holding value 3 W Approx. 10...40 % of Uc L/R 12 ms Open L/R 40 ms Closed Operating time Between coil energization and: Between coil de-energization and: N.O. contact closing N.C. contact opening N.O. contact opening (1) N.C. contact closing (1) 36...59 ms 31...53 ms 13...17 ms 15...20 ms (1) The use of RT5 surge suppressor increases opening time by a factor of 1.1 to 1.2 Mounting characteristics and conditions for use Contactor types AC operated DC operated VAS09 VASL09 Mounting positions VAS12 VASL12 Pos. 2 Pos. 4 -30° Pos. 3 Pos. 1 Pos. 1 ± 30° Pos. 5 The reversing contactors can be assembled side by side. 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally 1SBC101500S0201 Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) +30° VAS16 VASL16 4/50 | ABB VAS09 ... VAS16 and VASL09 ... VASL16 3-pole reversing contactors Technical data Connecting characteristics Contactor types AC operated DC operated VAS09 VASL09 VAS12 VASL12 VAS16 VASL16 Main terminals Screw terminals with cable clamp Connection capacity (min. ... max.) Main conductors (poles) Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule Connection capacity acc. to UL / CSA Stripping length Tightening torque Recommended Max. Auxiliary conductors (built-in auxiliary terminals + coil terminals) Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule Connection capacity acc. to UL / CSA Stripping length Tightening torque Coil terminals Recommended Max. Built-in auxiliary terminals Recommended Max. Degree of protection 1x 1x 1x 1x 0.75...4 mm² 0.75...2.5 mm² 0.75...1.5 mm² AWG 18...12 9 mm 1.00 Nm / 9 lb.in 1.20 Nm 1x 1x 1x 1x 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² AWG 18...14 9 mm 1.00 1.20 1.00 1.20 4 Nm / 9 lb.in Nm Nm / 9 lb.in Nm acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 IP20 Delivered in open position, screws of unused terminals must be tightened M3 Screwdriver type Flat Ø 5.5 / Pozidriv 2 1SBC101500S0201 All terminals Screw terminals All terminals ABB | 4/51 AS09 ... AS16 3-pole contactors Terminal marking and positioning AS contactors - AC operated Standard devices without addition of auxiliary contacts 1L1 3L2 5L3 13 NC NO NC 2T1 4T2 6T3 14 2T1 4T2 6T3 22 A2 AS09 ... AS16-30-10 1L1 3L2 5L3 13 A1 A1 1L1 3L2 5L3 13 NO A2 2T1 4T2 6T3 NO 14 A2 AS09 ... AS16-30-01 AS09 ... AS16-30-10 A1 1L1 3L2 5L3 21 NC A2 2T1 4T2 6T3 NC 22 AS09 ... AS16-30-01 A1 NO 21NC 31NC 43NO 53NO NC NC NO NO 22NC 32NC 44NO 54NO NO 2T1 4T2 6T3 14 A1 1L1 3L2 5L3 13 NO 21 NC 31 NC 43 NO 53 NO A2 2T1 4T2 6T3 NO 14 NC 22 NC 32 NO 44 NO 54 A2 AS09 … AS16-30-32 AS09 ... AS16-30-32 Other possible contact combinations with auxiliary contact blocks added by the user 1L1 3L2 5L3 13 1L1 3L2 5L3 13 A1 NO A1 NO 21 2- -1 = NC + 22 2- -2 NO 2T1 4T2 6T3 14 2T1 4T2 6T3 14 A2 = 21 33 NO 22 34 1L1 3L2 5L3 13 A1 3L2 5L3 13 NO 21 NC A2 2T1 4T2 6T3 NO 14 NC 22 + Combination 11 CA3-01 A1 NO 2- 3- -1 = + 2- 3- NO 2T1 4T2 6T3 14 1L1 A2 AS09 ... AS16-30-10 NO NC A1 NO Combination 11 1L1 3L2 5L3 13 NC NC -3 + -2 NO -4 A1 1L1 3L2 5L3 13 NO 21 NC 33 NO A2 2T1 4T2 6T3 NO 14 NC 22 NO 34 NO 2T1 4T2 6T3 14 A2 Combination 21 = A2 AS09 ... AS16-30-10 CA3 1-pole auxiliary contact blocks + CA3-01 + CA3-10 Combination 21 TEF3 front-mounted electronic timer 55 -1 -3 -3 NO -1 NO NC -4 56 NC CA3-10 4/52 | ABB -2 CA3-01 68 NO 55 NC 67 NO NC 56 NO 68 NC -2 -4 67 TEF3 1SBC101404S0201 4 1L1 3L2 5L3 21 A1 NO ASL09 ... ASL16 3-pole contactors Terminal marking and positioning ASL contactors - DC operated (the polarity A1+, A2- must be respected) Standard devices without addition of auxiliary contacts 1L1 3L2 5L3 13 1L1 3L2 5L3 21 A1+ NO NC NO NC 2T1 4T2 6T3 14 2T1 4T2 6T3 22 A2- ASL09 ... ASL16-30-10 A1+ A1+ 1L1 3L2 5L3 13 NO A2- 2T1 4T2 6T3 NO 14 A2- ASL09 ... ASL16-30-01 ASL09 ... ASL16-30-10 A1+ 1L1 3L2 5L3 21 NC A2- 2T1 4T2 6T3 NC 22 ASL09 ... ASL16-30-01 4 1L1 3L2 5L3 13 A1+ NO 21NC 31NC 43NO 53NO NC NC NO NO 22NC 32NC 44NO 54NO NO 2T1 4T2 6T3 14 A1+ 1L1 3L2 5L3 13 NO 21 NC 31 NC 43 NO 53 NO A2- 2T1 4T2 6T3 NO 14 NC 22 NC 32 NO 44 NO 54 A2- ASL09 … ASL16-30-32 ASL09 ... ASL16-30-32 Other possible contact combinations with auxiliary contact blocks added by the user 1L1 3L2 5L3 13 A1+ NO A1+ NO 21 2- -1 = NC + 22 2- -2 NO 2T1 4T2 6T3 14 = 21 33 NO 22 34 A2- 1L1 3L2 5L3 13 A1+ 3L2 5L3 13 NO 21 NC A2- 2T1 4T2 6T3 NO 14 NC 22 A1+ NO 2- 3- -1 = + 2- 3- NO 2T1 4T2 6T3 14 1L1 Combination 11 ASL09 ... ASL16-30-10 + CA3-01 NO NC A1+ NO 2T1 4T2 6T3 14 A2- Combination 11 1L1 3L2 5L3 13 NC NC -3 + -2 NO -4 A1+ 1L1 3L2 5L3 13 NO 21 NC 33 NO A2- 2T1 4T2 6T3 NO 14 NC 22 NO 34 NO 2T1 4T2 6T3 14 A2- Combination 21 = A2- ASL09 ... ASL16-30-10 + CA3-01 CA3 1-pole auxiliary contact blocks + CA3-10 Combination 21 TEF3 front-mounted electronic timer 55 -1 -3 -3 NO -1 NO NC -4 -2 CA3-01 67 68 NO 55 NC 67 NO NC 56 NO 68 NC -2 -4 CA3-10 56 NC 1SBC101404S0201 1L1 3L2 5L3 13 TEF3 ABB | 4/53 AS09 ... AS16 3-pole contactors mm, inches 100.2 100.2 3.94" 3.94" 50 1.97" 35 1.38" 35 1.38" 2x 2x ø 4.2 0.17" M4 8-32 ø 4.2 0.17" M4UNC 8-32 UNC 50 1.97" 60 2.36" 5.5 0.22" 5.5 0.22" 10 10 0.39" 0.39" 60 2.36" 35 mm EN/IEC 60715 7 0.28"7 0.28" 44.2 1.74" 72.5 2.85" 72.5 2.85" 35 mm EN/IEC 60715 60 2.36" 68 2.68" 50 1.97" 35 mm EN/IEC 60715 68 2.68" 5.5 0.22" AS09, AS12, AS16 AS09, AS12, AS16 + CA3 front-mounted 1-pole auxiliary contact block 128.1 5.04" 72.5 2.85" 10 0.39" 2x M4 8-32 UNC 35 1.38" ø 4.2 0.17" 50 1.97" 5.5 0.22" 60 2.36" 1.1 0.05" 44.2 1.74" 68 2.68" 35 mm EN/IEC 60715 7 0.28" 44.4 1.75" 45 1.77" AS09, AS12, AS16 + TEF3 electronic timer 100.2 3.94" 72.5 2.85" 44.2 1.74" 35 mm EN/IEC 60715 5.5 0.22" 35 1.38" ø 4.2 0.17" 50 1.97" 2x M4 8-32 UNC 7 0.28" 60 2.36" 45 1.77" 68 2.68" AS09 ... 16-30-32 1SBC101405S0201 4 35 1.38" 2x 45 1.77" 45 1.77" ø 4.2 0.17" M4 8-32 UNC 10 0.39" 44.2 1.74" 72.5 2.85" 7 0.28" 45 1.77" 68 2.68" Main dimensions 4/54 | ABB AS09 ... AS16 3-pole contactors Main dimensions mm, inches 72.5 2.85" 80 3.15" 4x M4 8-32 UNC 10 0.39" 5.5 0.22" 60 2.36" 68 2.68" 35 mm EN/IEC 60715 7 0.28" ø 4.2 0.17" 50 1.97" 90 3.54" 4 AS09, AS12, AS16 + VM3 mechanical interlock unit including two BB3 fixing clips 72.5 2.85" 2x M4 8-32 UNC 10 0.39" 5.5 0.22" 60 2.36" 35 mm EN/IEC 60715 68 2.68" 78.5 3.09" 7 0.28" 80 3.15" ø 4.2 0.17" 50 1.97" 90 3.54" AS09, AS12, AS16 + BER16C-3 connection set for reversing starter including two BB3 fixing clips 72.5 2.85" 10 0.39" 5.5 0.22" 4x M4 8-32 UNC 125 4.92" ø 4.2 0.17" 50 1.97" 35 mm EN/IEC 60715 68 2.68" 78.5 3.09" 7 0.28" 60 2.36" 135 5.31" 1SBC101405S0201 AS09, AS12, AS16 + BEY16C-3 connection set for star-delta starter including four BB3 fixing clips ABB | 4/55 ASL09 ... ASL16 3-pole contactors mm, inches 100.2 3.94" 72.5 2.85" 35 1.38" ø 4.2 0.17" 60 2.36" 5.5 0.22" 35 1.38" 10 2x 2x 4.2 0.17" 0.39" M4 8-32 UNC M4ø8-32 UNC 60 2.36" 5.5 0.22" 72.5 2.85" 10 0.39" 7 0.28" 44.2 1.74" 7 0.28" 35 mm EN/IEC 60715 45 1.77" 68 2.68" 60 2.36" 68 2.68" 35 mm EN/IEC 60715 68 2.68" 5.5 0.22" ASL09, ASL12, ASL16 ASL09, ASL12, ASL16 + CA3 front-mounted 1-pole auxiliary contact block 128.1 5.04" 72.5 2.85" 10 0.39" 2x M4 8-32 UNC 35 1.38" ø 4.2 0.17" 1.1 0.05" 5.5 0.22" 44.4 1.75" 68 2.68" 35 mm EN/IEC 60715 7 0.28" 60 2.36" 45 1.77" ASL09, ASL12, ASL16 + TEF3 electronic timer 100.2 3.94" 5.5 0.22" 10 0.39" 2x M4 8-32 UNC 35 1.38" ø 4.2 0.17" 60 2.36" 35 mm EN/IEC 60715 7 0.28" 44.2 1.74" 72.5 2.85" 45 1.77" 68 2.68" ASL09 ... 16-30-32 1SBC101406S0201 4 35 1.38" 45 1.77" ø 4.2 0.17" 2x M4 8-32 UNC 10 0.39" 44.2 1.74" 100.2 3.94" 72.5 2.85" 7 0.28" 45 1.77" 35 mm EN/IEC 60715 Main dimensions 4/56 | ABB ASL09 ... ASL16 3-pole contactors Main dimensions mm, inches 72.5 2.85" 7 0.28" 4x M4 8-32 UNC 10 0.39" 5.5 0.22" 80 3.15" ø 4.2 0.17" 60 2.36" 68 2.68" 35 mm EN/IEC 60715 90 3.54" 4 ASL09, ASL12, ASL16 + VM3 mechanical interlock unit including two BB3 fixing clips 90 3.54" 72.5 2.85" 2x M4 8-32 UNC 10 0.39" 5.5 0.22" 80 3.15" ø 4.2 0.17" 60 2.36" 35 mm EN/IEC 60715 68 2.68" 78.5 3.09" 7 0.28" ASL09, ASL12, ASL16 + BER16C-3 connection set for reversing starter including two BB3 fixing clips 72.5 2.85" 35 mm EN/IEC 60715 68 2.68" 78.5 3.09" 7 0.28" 10 0.39" 5.5 0.22" 4x M4 8-32 UNC 125 4.92" ø 4.2 0.17" 60 2.36" 135 5.31" 1SBC101406S0201 ASL09, ASL12, ASL16 + BEY16C-3 connection set for star-delta starter including four BB3 fixing clips ABB | 4/57 VAS09 ... VAS16 reversing contactors mm, inches 72.5 2.85" 4 35 mm EN/IEC 60715 68 2.68" 78.5 3.09" 7 0.28" 2x M4 8-32 UNC 10 0.39" 5.5 0.22" 80 3.15" ø 4.2 0.17" 50 1.97" 90 3.54" 60 2.36" Main dimensions VAS09, VAS12, VAS16 100.2 3.94" 72.5 2.85" 5.5 0.22" 80 3.15" ø 4.2 0.17" 50 1.97" 2x M4 8-32 UNC 10 0.39" 60 2.36" 35 mm EN/IEC 60715 68 2.68" 78.5 3.09" 7 0.28" 44.2 1.74" 90 3.54" 1SBC101407S0201 VAS09, VAS12, VAS16 + CA3 front-mounted 1-pole auxiliary contact block 4/58 | ABB VASL09 ... VASL16 reversing contactors mm, inches 72.5 2.85" 90 3.54" 68 2.68" 35 mm EN/IEC 60715 78.5 3.09" 7 0.28" 2x M4 8-32 UNC 10 0.39" 5.5 0.22" 80 3.15" ø 4.2 0.17" 60 2.36" Main dimensions 4 VASL09, VASL12, VASL16 100.2 3.94" 72.5 2.85" 2x M4 8-32 UNC 10 0.39" 5.5 0.22" 80 3.15" ø 4.2 0.17" 60 2.36" 68 2.68" 35 mm EN/IEC 60715 VASL09, VASL12, VASL16 + CA3 front-mounted 1-pole auxiliary contact block 1SBC101408S0201 78.5 3.09" 7 0.28" 44.2 1.74" 90 3.54" ABB | 4/59 Contactor relays Main accessories NS, NSL Contactor relays 4 4-pole contactor relays 8-pole contactor relays RV5, RT5 or RC5-1 Surge suppressor RV5, RT5 or RC5-1 Surge suppressor CA-3 1-pole auxiliary contact block NS NSL Contactor relays 1SBC101409S0201 NS NSL Contactor relays 4/60 | ABB Contactor relays Screw terminals NSL NS AC control voltage NS22E NS31E NS40E DC control voltage NSL22E NSL31E NSL40E 2 N.O. + 2 N.C. 3 N.O. + 1 N.C. 4 N.O. NS 4 NSL AC control voltage NS44E NS53E NS62E NS71E NS80E DC control voltage NSL44E NSL53E NSL62E NSL71E NSL80E 4 N.O. + 4 N.C. 5 N.O. + 3 N.C. 6 N.O. + 2 N.C. 7 N.O. + 1 N.C. 8 N.O. Control circuit switching Rated operational current AC-15 IEC DC-13 240 V 4A 400 V 3A 690 V 2A 24 V 250 V UL / CSA Pilot Duty 6 A / 144 W 0.27 A / 68 W A600, Q300 Main accessories Auxiliary Front mounting blocks Surge suppressors 1-pole CA3-10 or CA3-01 Side-mounted RV5 (Varistor) AC / DC (without additional RC5-1 (Capacitor) AC width) RT5 (Transil diode) DC 1SBC101409S0201 contact ABB | 4/61 NS contactor relays AC operated 1SBC101012F0014 Description NS22E NS contactor relays are used for switching auxiliary and control circuits. These contactor relays are designed with: –– 4 poles or 8 poles. Contactor relays have mechanically linked auxiliary contact elements (side-marked symbol) –– control circuit: AC operated –– add-on auxiliary contact blocks for front mounting and a comprehensive range of accessories. Ordering details Number of contacts 1st stack Rated control circuit voltage Uc (1) 2nd stack 4 A1 13 NO 21 NC 31 NC 43 NO A2 NO 14 NC 22 NC 32 NO 44 A1 13 NO 21 NC 33 NO 43 NO A2 NO 14 NC 22 NO 34 NO 44 A1 13 NO 23 NO 33 NO 43 NO A2 NO 14 NO 24 NO 34 NO 44 A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 V 50 Hz 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 V 60 Hz 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 Type NS22E-20 NS22E-16 NS22E-26 NS22E-28 NS31E-20 NS31E-16 NS31E-26 NS31E-28 NS40E-20 NS40E-16 NS40E-26 NS40E-28 NS44E-20 NS44E-16 NS44E-26 NS44E-28 NS53E-20 NS53E-16 NS53E-26 NS53E-28 NS62E-20 NS62E-16 NS62E-26 NS62E-28 NS71E-20 NS71E-16 NS71E-26 NS71E-28 NS80E-20 NS80E-16 NS80E-26 NS80E-28 Order code Weight 1SBH101001R2022 1SBH101001R1622 1SBH101001R2622 1SBH101001R2822 1SBH101001R2031 1SBH101001R1631 1SBH101001R2631 1SBH101001R2831 1SBH101001R2040 1SBH101001R1640 1SBH101001R2640 1SBH101001R2840 1SBH101001R2044 1SBH101001R1644 1SBH101001R2644 1SBH101001R2844 1SBH101001R2053 1SBH101001R1653 1SBH101001R2653 1SBH101001R2853 1SBH101001R2062 1SBH101001R1662 1SBH101001R2662 1SBH101001R2862 1SBH101001R2071 1SBH101001R1671 1SBH101001R2671 1SBH101001R2871 1SBH101001R2080 1SBH101001R1680 1SBH101001R2680 1SBH101001R2880 Pkg (1 pce) kg 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. mm, inches 100.2 3.94" 2 x M4 8-32 UNC 72.5 2.85" 35 1.38" NS22E, NS31E, NS40E 4/62 | ABB 5.5 0.22" NS44E, NS53E, NS62E, NS71E, NS80E ø 4.2 0.17" 44.2 1.74" 35 mm EN/IEC 60715 5.5 0.22" 68 2.68" 35 mm EN/IEC 60715 68 2.68" 7 0.28" 50 1.97" 45 1.77" 1SBC101475S0201 72.5 2.85" 7 0.28" 45 1.77" 60 2.36" Main dimensions NSL contactor relays DC operated Ordering details Number of contacts 1st stack A1+ 13 NO 21 NC 31 NC 43 NO NO 14 NC 22 NC 32 NO 44 13 NO 21 NC 33 NO 43 NO NO 14 NC 22 NO 34 NO 44 13 NO 23 NO 33 NO 43 NO NO 14 NO 24 NO 34 NO 44 A1+ 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2- NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A2- NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 A2- A1+ A2- A1+ A2- Rated control circuit voltage Uc (1) V DC 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 2nd stack Type NSL22E-81 NSL22E-83 NSL22E-86 NSL22E-88 NSL31E-81 NSL31E-83 NSL31E-86 NSL31E-88 NSL40E-81 NSL40E-83 NSL40E-86 NSL40E-88 NSL44E-81 NSL44E-83 NSL44E-86 NSL44E-88 NSL53E-81 NSL53E-83 NSL53E-86 NSL53E-88 NSL62E-81 NSL62E-83 NSL62E-86 NSL62E-88 NSL71E-81 NSL71E-83 NSL71E-86 NSL71E-88 NSL80E-81 NSL80E-83 NSL80E-86 NSL80E-88 Order code Weight 1SBH103001R8122 1SBH103001R8322 1SBH103001R8622 1SBH103001R8822 1SBH103001R8131 1SBH103001R8331 1SBH103001R8631 1SBH103001R8831 1SBH103001R8140 1SBH103001R8340 1SBH103001R8640 1SBH103001R8840 1SBH103001R8144 1SBH103001R8344 1SBH103001R8644 1SBH103001R8844 1SBH103001R8153 1SBH103001R8353 1SBH103001R8653 1SBH103001R8853 1SBH103001R8162 1SBH103001R8362 1SBH103001R8662 1SBH103001R8862 1SBH103001R8171 1SBH103001R8371 1SBH103001R8671 1SBH103001R8871 1SBH103001R8180 1SBH103001R8380 1SBH103001R8680 1SBH103001R8880 Pkg (1 pce) kg 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 4 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. mm, inches 100.2 3.94" 2 x M4 8-32 UNC 72.5 2.85" 45 1.77" 35 1.38" NSL22E, NSL31E, NSL40E 5.5 0.22" ø 4.2 0.17" 44.2 1.74" 35 mm EN/IEC 60715 5.5 0.22" 68 2.68" 7 0.28" NSL44E, NSL53E, NSL62E, NSL71E, NSL80E ABB | 4/63 1SBC101479S0201 72.5 2.85" 7 0.28" 45 1.77" 60 2.36" Main dimensions 35 mm EN/IEC 60715 NSL22E NSL contactor relays are used for switching auxiliary and control circuits. These contactor relays are designed with: –– 4 poles or 8 poles. Contactor relays have mechanically linked auxiliary contact elements (side-marked symbol) –– control circuit: low coil consumption (3 W at pull-in and holding) DC operated with solid core magnet. Suitable for direct control by PLC outputs (the polarity on the coil terminals A1+ and A2- must be respected) –– add-on auxiliary contact blocks for front mounting and a comprehensive range of accessories. 68 2.68" 1SBC101018F0014 Description NS and NSL contactor relays Main accessories Contactor relays and main accessories (other accessories available) 4-pole contactor relay RV5, RC5-1 or RT5 4 CA3 NS NSL Contactor relays 8-pole contactor relay RV5, RC5-1 or RT5 TEF3 NS NSL Contactor relays Main accessory fitting details Contactor types Front-mounted accessories Auxiliary contact blocks Main poles Side-mounted accessories Electronic timer 1-pole CA3 2 3 4 4 5 6 7 8 2 3 4 4 5 6 7 8 2 1 0 4 3 2 1 0 2 1 0 4 3 2 1 0 E E E E E E E E E E E E E E E E 2 max. TEF3 or – 2 max. – 1 Surge suppressors + – or 1 – + RV5 or RC5-1 RV5 or RC5-1 RV5 or RT5 RV5 or RT5 1SBC101298S0201 NS.. NS.. NS.. NS.. NS.. NS.. NS.. NS.. NSL.. NSL.. NSL.. NSL.. NSL.. NSL.. NSL.. NSL.. 4/64 | ABB NS and NSL contactor relays Main accessories Front-mounted instantaneous auxiliary contact blocks 1SBC101036F0014 For contactor relays Auxiliary Type contacts NS, NSL 1 0 CA3-10 0 1 CA3-10 CA3-01 Order code Pkg qty Weight (1 pce) 1SBN011010T1010 1SBN011010T1001 10 10 kg 0.011 0.011 Order code Pkg qty Weight (1 pce) kg Front-mounted electronic timer 1SBC574001F0301 TEF3-ON RV5 Rated control circuit voltage - Uc V Type ON-delay NS, NSL 24...240 V AC/DC TEF3-ON 1SBN021012R1000 1 0.065 OFF-delay NS, NSL 24...240 V AC/DC TEF3-OFF 1SBN021014R1000 1 0.065 Type Order code Pkg qty RV5/50 RV5/133 RV5/250 RV5/440 RC5-1/50 RC5-1/133 RC5-1/250 RC5-1/440 RT5/32 RT5/65 RT5/90 RT5/150 RT5/264 1SBN050010R1000 1SBN050010R1001 1SBN050010R1002 1SBN050010R1003 1SBN050100R1000 1SBN050100R1001 1SBN050100R1002 1SBN050100R1003 1SBN050020R1000 1SBN050020R1001 1SBN050020R1002 1SBN050020R1003 1SBN050020R1004 2 2 2 2 2 2 2 2 2 2 2 2 2 Weight (1 pce) kg 0.015 0.015 0.015 0.015 0.012 0.012 0.012 0.012 0.015 0.015 0.015 0.015 0.015 4 Surge suppressors For contactor relays NS, NSL NS NSL Rated control circuit voltage - Uc V AC ● 24...50 ● 50...133 ● 110...250 ● 250...440 ● 24...50 ● 50...133 ● 110...250 ● 250...440 12...32 – 25...65 – 50...90 – 77...150 – 150...264 – DC ● ● ● ● – – – – ● ● ● ● ● 1SBC101298S0201 1SBC101337F0014 For contactors ABB | 4/65 NS and NSL contactor relays Technical data Contact utilization characteristics according to IEC Contactor relay types AC operated DC operated Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 4 24-127 V 50/60 Hz 220-240 V 50/60 Hz 400-440 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz Making capacity AC-15 Breaking capacity AC-15 Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC NS NSL IEC 60947-5-1 and EN 60947-5-1 690 V 50 / 60 Hz 10 A 6 A 4 A 3 A 2 A 2 A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.27 A / 60 W 0.27 A / 68 W Short-circuit protection device for contactors Ue ≤ 500 V AC - gG type fuse Rated short-time withstand current Icw Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Non-overlapping time between N.O. and N.C. contacts Power dissipation per pole at 6 A Max. electrical switching frequency Mechanically linked contacts acc. to annex L of IEC 60947-5-1 10 A 100 A 140 A 12 V / 3 mA 10-7 1.5 ms 0.1 W AC-15 1200 cycles/h DC-13 900 cycles/h Built-in N.O. or N.C. auxiliary contacts and additional N.O. or N.C. auxiliary contacts (CA3 aux. contact blocks) are mechanically linked contacts. for 1.0 s for 0.1 s Contact utilization characteristics according to UL / CSA Contactor relay types NS NSL UL 508, CSA C22.2 N°14 600 V AC, 250 V DC A600, Q300 10 A 7200 VA 720 VA 2.5 A 69 VA 1SBC101502S0201 Standards Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking AC operated DC operated 4/66 | ABB NS and NSL contactor relays Technical data Magnet system characteristics for NS contactor relays Contactor relay types Coil operating limits AC operated NS AC supply acc. to IEC 60947-5-1 AC control voltage Rated control circuit voltage Uc at 50 Hz at 60 Hz Coil consumption Average pull-in value 50 Hz 60 Hz 50/60 Hz Average holding value 50 Hz 60 Hz 50/60 Hz Drop-out voltage Operating time Between coil energization and: Between coil de-energization and: N.O. contact closing N.C. contact opening N.O. contact opening (1) N.C. contact closing (1) 0.85...1.1 x Uc (at θ ≤ 60 °C); Uc (at θ ≤ 70 °C) 24...415 V 24...415 V 33 VA 33 VA 33 VA 6.5 VA / 1.5 W 5 VA / 1.2 W 6.5 VA / 1.5 W Approx. 30...50 % of Uc 4 9...24 ms 6...18 ms 5...19 ms 7...22 ms (1) The use of RC5-1 surge suppressor increases opening time by a factor of 2 to 3. Magnet system characteristics for NSL contactor relays Contactor relay types Coil operating limits acc. to IEC 60947-5-1 DC control voltage Drop-out voltage Coil time constant DC operated DC supply NSL 0.85...1.1 x Uc (at θ ≤ 60 °C); Uc (at θ ≤ 70 °C) Rated control circuit voltage Uc 12...240 V DC Average pull-in value 3 W Coil consumption Average holding value 3 W Approx. 10...40 % of Uc L/R 12 ms Open L/R 40 ms Closed Operating time Between coil energization and: Between coil de-energization and: N.O. contact closing N.C. contact opening N.O. contact opening (1) N.C. contact closing (1) 36...59 ms 31...53 ms 13...17 ms 15...20 ms (1) The use of RT5 surge suppressor increases opening time by a factor of 1.1 to 1.2. Mounting characteristics and conditions for use Contactor relay types AC operated DC operated NS NSL Mounting positions Pos. 2 Pos. 4 Pos. 3 Pos. 1 The contactor relays can be assembled side by side. 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally 1SBC101502S0201 Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) Pos. 5 ABB | 4/67 NS and NSL contactor relays Technical data General technical data Contactor relay types AC operated DC operated acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 A C1 B1 A B2 C2 690 V 600 V 6 kV -40...+70 °C -60...+80 °C Category B according to IEC 60947-1 Annex Q 3000 m Shock direction A B1 B2 C1 C2 Vibration withstand acc. to IEC 60068-2-6 20 millions operating cycles 3600 cycles/h 1/2 sinusoidal shock for 11 ms: no change in contact position, closed or open position NS contactor relays - AC operated NSL contactor relays - DC operated 20 g 20 g closed position / 10 g open position 5 g 15 g closed position / 5 g open position 15 g 10 g 19 g closed position / 8 g open position 19 g closed position / 8 g open position 16 g closed position / 13 g open position 14 g closed position / 8 g open position 5...300 Hz / 3 g closed position / 2 g open position Connecting characteristics Contactor relay types AC operated DC operated NS NSL Main terminals Screw terminals with cable clamp Connection capacity (min. ... max.) Pole and coil terminals Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule l L Lugs Connection capacity acc. to UL / CSA Stripping length Tightening torque Recommended Max. Degree of protection 1x 2x 1x 2x 1x 2x L≤ l> 1 or 2 x 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 7.7 mm 3.2 mm AWG 18...14 9 mm 1.00 Nm / 9 lb.in 1.20 Nm acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 All terminals Screw terminals All terminals IP20 Delivered in open position, screws of unused terminals must be tightened Screwdriver type M3 Flat Ø 5.5 / Pozidriv 2 1SBC101502S0201 4 Rated insulation voltage Ui acc. to IEC 60947-5-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Ambient air temperature close to contactor relay Operation in free air Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency Shock withstand NS NSL 4/68 | ABB Notes N16 4 ABB | 4/69 NS contactor relays Terminal marking and positioning NS contactor relays - AC operated Standard devices without addition of auxiliary contact blocks 13 21 31 43 13 21 33 43 A1 NO NC NC NO 13 23 33 43 A1 NO NC NO NO 13 23 33 43 A1 NO NO NO NO A1 13 NO 21 NC 31 NC 43 NO A2 NO 14 NC 22 NC 32 NO 44 A1 NO NO NO NO 51 61 71 81 NS22E A1 13 NO 21 NC 33 NO 43 NO A2 NO 14 NC 22 NO 34 NO 44 NS31E NC NC NC NC 52 62 72 82 NO NC NC NO 14 22 32 44 14 22 34 44 A2 NS22E NO NO NO NO 14 24 34 44 A2 NS31E 13 23 33 43 14 24 34 44 A2 NS40E 13 23 33 43 A1 NO NO NO NO 13 23 33 43 A1 NS44E NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO 53 61 71 81 53 61 71 83 53 61 73 83 53 63 73 83 NO NC NC NC NO NC NC NO NO NC NO NO NO NO NO NO 54 62 72 82 54 62 72 84 54 62 74 84 54 64 74 84 NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO 14 24 34 44 14 24 34 44 A2 NS53E 14 24 34 44 A2 NS62E 14 24 34 44 A2 NS71E 13 NO 23 NO 33 NO 43 NO A2 NO 14 NO 24 NO 34 NO 44 NS40E 13 23 33 43 A1 A1 A2 A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 NS44E A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 A1 NS53E A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 A2 NS80E NS62E NS71E NS80E Other possible contact combinations with auxiliary contact blocks added by the user 13 21 33 43 13 21 33 43 A1 NO NC NO NO 13 23 33 43 A1 NO NC NO NO 53 5- = NO 54 + 5- NO NC NO NO 14 22 34 44 Combination 41E 13 23 33 43 14 22 34 44 = 51 61 NO NC NC -4 52 62 14 24 34 44 A2 + CA3-10 NO NO NO NO 53 = NO 54 + 5- NO NO NO NO -3 53 63 NO NO NO -4 54 64 NO NO NO NO 14 24 34 44 A2 Combination 50E = 14 24 34 44 NS40E + CA3-10 CA3 1-pole auxiliary contact blocks NO -1 NO NC -4 = CA3-10 4/70 | ABB 13 NO 21 NC 33 NO 43 NO 53 NO A2 NO 14 NC 22 NO 34 NO 44 NO 54 + NC NC Combination 41E -2 A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 A2 + 13 23 33 43 A1 CA3-01 + CA3-01 A1 Combination 42E A1 13 NO 23 NO 33 NO 43 NO 53 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO NO NO NO 5- 6- 5- 6- -3 = + -3 + NO -4 NO 14 24 34 44 A2 Combination 60E = NS40E Combination 50E -4 NO NO NO NO 56 NC A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 A2 + CA3-10 + CA3-10 Combination 60E 67 68 NO 55 NC 67 NO NC 56 NO 68 NC -2 CA3-01 -1 -2 NS40E -2 -4 6- 14 24 34 44 A2 55 -3 A1 TEF3 front-mounted electronic timer -1 -3 5- -1 NO NO NO NO NO NO NO NO A2 6- + NO NO NO NO 5- 5- = Combination 42E 13 23 33 43 A1 A1 NO NO NO NO NO NO NO NO NS31E 13 23 33 43 A1 NO NO NO NO 14 24 34 44 -3 NO NC NO NO A2 13 23 33 43 A1 NO NO NO NO TEF3 1SBC101410S0201 4 NO NC NO NO NSL contactor relays Terminal marking and positioning NSL contactor relays - DC operated (the polarity A1+, A2- must be respected) Standard devices without addition of auxiliary contact blocks A1+ 13 21 31 43 13 21 33 43 A1+ NO NC NC NO 13 23 33 43 A1+ NO NC NO NO 13 23 33 43 A1+ NO NO NO NO A1+ NO NO NO NO A2- 51 61 71 81 13 NO 21 NC 31 NC 43 NO NO 14 NC 22 NC 32 NO 44 A1+ A2- NSL22E 13 NO 21 NC 33 NO 43 NO NO 14 NC 22 NO 34 NO 44 NSL31E NC NC NC NC 52 62 72 82 NO NC NC NO 14 22 32 44 NO NC NO NO 14 22 34 44 A2- NO NO NO NO 14 24 34 44 A2- A1+ NO NO NO NO 14 24 34 44 A2- A2A2- NSL22E NSL31E 13 23 33 43 NSL40E 13 23 33 43 A1+ NSL44E 13 23 33 43 A1+ NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO 53 61 71 81 53 61 71 83 53 61 73 83 53 63 73 83 NO NC NC NC NO NC NC NO NO NC NO NO NO NO NO NO 54 62 72 82 54 62 72 84 54 62 74 84 54 64 74 84 NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO 14 24 34 44 14 24 34 44 A2- NSL53E 14 24 34 44 A2- NSL62E 14 24 34 44 A2- NSL71E 23 NO 33 NO 43 NO NO 14 NO 24 NO 34 NO 44 NSL40E 13 23 33 43 A1+ 13 NO 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A2- NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 NSL80E 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2- NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 4 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 NSL62E NSL53E A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A2- 13 NO NSL44E A1+ A1+ A1+ NSL71E A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 NSL80E Other possible contact combinations with auxiliary contact blocks added by the user 13 21 33 43 A1+ NO NC NO NO 13 23 33 43 A1+ NO NC NO NO 53 5- = NO 54 + 5- NO NC NO NO 14 22 34 44 -3 51 61 NO NC NC -4 52 62 NO NC NO NO 14 22 34 44 A2- 13 23 33 43 A1+ NO NO NO NO 14 24 34 44 5- 6- 5- 6- -1 = NO NO NO NO A2- A1+ NO NO NO NO + -1 + NC -2 NC 14 24 34 44 13 NO 21 NC 33 NO 43 NO 53 NO A2- NO 14 NC 22 NO 34 NO 44 NO 54 Combination 41E -2 A1+ NO NO NO NO A2- A1+ A2A2- Combination 41E 13 23 33 43 = NSL31E 13 23 33 43 A1+ NO NO NO NO + = 54 + 5- NO NO NO NO -3 53 63 NO NO NO -4 54 64 NO NO NO NO 14 24 34 44 A2- Combination 50E = = 14 24 34 44 NSL40E + CA3-10 CA3 1-pole auxiliary contact blocks -3 NO -1 NO NC -4 CA3-10 CA3-01 6- 5- 6- -3 -3 + NO -4 NO 14 24 34 44 A2- Combination 60E = NSL40E 33 NO 43 NO 51 NC 61 NC NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 Combination 50E -4 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 A2- + 23 NO Combination 42E NO NO NO NO CA3-10 + CA3-10 Combination 60E TEF3 front-mounted electronic timer 56 NC 67 68 NO 55 NC 67 NO NC 56 NO 68 NC -2 CA3-01 5- + -2 -4 CA3-01 + A1+ = 55 -1 -3 + NO NO NO NO NO NO NO NO A2- NSL40E 13 23 33 43 A1+ NO NO NO NO 5- NO Combination 42E 13 23 33 43 A1+ NO NO NO NO 53 14 24 34 44 CA3-10 13 NO 1SBC101410S0201 13 21 33 43 TEF3 ABB | 4/71 NS contactor relays Main dimensions mm, inches 4-pole contactor relays 72.5 2.85" ø 4.2 0.17" 50 1.97" 5.5 0.22" 60 2.36" 35 mm EN/IEC 60715 68 2.68" 35 1.38" 2x M4 8-32 UNC 7 0.28" 45 1.77" 4 NS22E, NS31E, NS40E 100.2 3.94" 72.5 2.85" 2x M4 8-32 UNC 5.5 0.22" 60 2.36" 44.2 1.74" 68 2.68" 35 mm EN/IEC 60715 7 0.28" 35 1.38" ø 4.2 0.17" 50 1.97" 45 1.77" NS22E, NS31E, NS40E + CA3 front-mounted 1-pole auxiliary contact block 128.1 5.04" 72.5 2.85" 45 1.77" 10 0.39" 2x M4 8-32 UNC 35 1.38" ø 4.2 0.17" 50 1.97" 60 2.36" 5.5 0.22" 44.4 1.75" 1.1 0.05" 44.2 1.74" 68 2.68" 35 mm EN/IEC 60715 7 0.28" NS22E, NS31E, NS40E + TEF3 electronic timer 8-pole contactor relays 100.2 3.94" 72.5 2.85" 35 1.38" ø 4.2 0.17" 50 1.97" 44.2 1.74" 5.5 0.22" 60 2.36" 2x M4 8-32 UNC 7 0.28" 35 mm EN/IEC 60715 68 2.68" 45 1.77" 1SBC101411S0201 NS44E, NS53E, NS62E, NS71E, NS80E 4/72 | ABB NSL contactor relays Main dimensions mm, inches 4-pole contactor relays 72.5 2.85" 35 mm EN/IEC 60715 5.5 0.22" ø 4.2 0.17" 60 2.36" 68 2.68" 35 1.38" 2x M4 8-32 UNC 7 0.28" 45 1.77" 4 NSL22E, NSL31E, NSL40E 100.2 3.94" 72.5 2.85" 45 1.77" 2x M4 8-32 UNC 5.5 0.22" 35 1.38" ø 4.2 0.17" 60 2.36" 44.2 1.74" 68 2.68" 35 mm EN/IEC 60715 7 0.28" NSL22E, NSL31E, NSL40E + CA3 front-mounted 1-pole auxiliary contact block 128.1 5.04" 72.5 2.85" 45 1.77" 10 0.39" 2x M4 8-32 UNC 35 1.38" ø 4.2 0.17" 50 1.97" 60 2.36" 5.5 0.22" 44.4 1.75" 1.1 0.05" 44.2 1.74" 68 2.68" 35 mm EN/IEC 60715 7 0.28" NSL22E, NSL31E, NSL40E + TEF3 electronic timer 8-pole contactor relays 100.2 3.94" 72.5 2.85" 44.2 1.74" 5.5 0.22" 35 1.38" ø 4.2 0.17" 60 2.36" 2x M4 8-32 UNC 7 0.28" 35 mm EN/IEC 60715 68 2.68" 45 1.77" 1SBC101411S0201 NSL44E, NSL53E, NSL62E, NSL71E, NSL80E ABB | 4/73 Auxiliary contact blocks Accessories 1SBC101036F0014 Description CA3-10 4 The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits. CA3 1-pole auxiliary contact blocks, designed for standard industrial environments, are equipped with: – – N.O. or N.C. contacts. – – Screw-type connecting terminals with cage clamp delivered open. All 1-pole auxiliary contact blocks are protected against accidental direct contact and bear the corresponding function marking. A maximum of two 1-pole auxiliary contact blocks can be front-mounted on 1-stack contactors or 1-stack contactor relays. Ordering details For contactors For contactor relays Contact Type blocks Order code Pkg qty Weight (1 pce) kg 1-pole auxiliary contact blocks with screw terminals AS09 ... AS16 NS, NSL 1 – CA3-10 ASL09 ... ASL16 – 1 CA3-01 Main dimensions 1SBN011010T1010 1SBN011010T1001 10 10 0.011 0.011 mm, inches 100.2 3.94" 4/74 | ABB 5.5 0.22" 10 0.39" 1SBC101492S0201 35 mm EN/IEC 60715 68 2.68" 7 0.28" 44.2 1.74" 72.5 2.85" 45 1.77" Auxiliary contact blocks Technical data Contact utilization characteristics according to IEC 1-pole CA3 IEC 60947-5-1 and EN 60947-5-1 690 V 6 kV 690 V 10 A Types Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated impulse withstand voltage Uimp Rated operational voltage Ue max. Conventional thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 24-127 V 50/60 Hz 220-240 V 50/60 Hz 400-440 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz Making capacity Breaking capacity Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw θ = 40 °C Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Power dissipation per pole at 6 A Mechanical durability Number of operating cycles Max. switching frequency Max. electrical switching frequency Mechanically linked contacts acc. to annex L of IEC 60947-5-1 Mirror contacts acc. to annex F of IEC 60947-4-1 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC for 1.0 s for 0.1 s 6A 4A 3A 2A 2A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.27 A / 60 W 0.27 A / 68 W 10 A 100 A 140 A 12 V / 3 mA 10-7 0.1 W 4 10 millions operating cycles 3600 cycles/h AC-15 1200 cycles/h DC-13 900 cycles/h Additional N.O. or N.C. auxiliary contacts (CA3) are mechanically linked contacts Additional N.C. auxiliary contacts (CA3) are mirror contacts Contact utilization characteristics according to UL / CSA UL 508, CSA C22.2 N°14 690 V AC, 250 V DC A600, Q300 10 A 7200 VA 720 VA 2.5 A 69 VA Standards Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking Connecting characteristics Flexible with non insulated ferrule Flexible with insulated ferrule l L Lugs Connection capacity acc. to UL / CSA Stripping length Recommended Tightening torque Max. Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screw terminals All terminals Screwdriver type 1x 2x 1x 2x 1x 2x L≤ l> 1 or 2 x 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 7.7 mm 3.2 mm AWG 18...14 9 mm 1 Nm / 9 Ib.in 1.20 Nm IP20 Delivered in open position, screws of unused terminals must be tightened M3 Flat Ø 5.5 / Pozidriv 2 1SBC101493S0201 Connection capacity (min. ... max.) Rigid solid ABB | 4/75 Auxiliary contact blocks for AS09 ... AS16, ASL09 ... ASL16 contactors and NS, NSL contactor relays Electrical durability Electrical durability for AC-15 utilization category - Ue ≤ 400 V AC-15 utilization category according to IEC 60947-5-1 / EN 60947-5-1: –– making current: 10 x Ie with cos ϕ = 0.7 and Ue – – breaking current: Ie with cos ϕ = 0.4 and Ue. This curve represents the electrical durability of the built-in or add-on auxiliary contacts in relation to the breaking current. Millions of operating cycles 30 20 10 5 3 2 1 0.5 0.3 0.2 1 0.1 0.02 0.05 0.1 0.2 0.3 0.5 1 3 1.3 5 7 9 2 3 4 5 6 10 Breaking current Ic (A) Example: Breaking current = 1.3 A On the opposite curve at intersection " " 1.3 A the corresponding value for the electrical durability is approximately 2 millions operating cycles. 1SBC101932S0201 4 The curve has been drawn for resistive and inductive loads up to 400 V: – – AS09 ... AS16 and ASL09 ... ASL16 contactor built-in auxiliary contacts –– 1-pole CA3 –– NS and NSL contactor relays. 4/76 | ABB Electronic timers 4 Ordering details For contactors, Time delay contactor relays range Delay type selected by switch Rated control circuit voltage Uc Auxiliary Type contacts Order code 24...240 1 1 TEF3-ON 1SBN021012R1000 kg 0.065 OFF-delay 24...240 1 1 TEF3-OFF 1SBN021014R1000 0.065 V 50/60 Hz or DC TEF3-OFF AS09 ... AS16 ASL09 ... ASL16 NS, NSL 0.1...1 s 1...10 s 10...100 s Main dimensions Weight Pkg (1 pce) ON-delay mm, inches 128.1 5.04" 72.5 2.85" 10 0.39" 2x M4 8-32 UNC 35 1.38" ø 4.2 0.17" 1.1 0.05" 1SBC101504S0201 5.5 0.22" 50 1.97" 35 mm EN/IEC 60715 68 2.68" 7 0.28" 60 2.36" 45 1.77" 44.4 1.75" 1SBC101336F0010 TEF3-ON TEF3 frontal electronic timers are used for realizing timing function and are available in ON-delay and OFFdelay versions. Compact solution in cabinet compared to separate timers TEF3 electronic timers are front-mounted and locked on AS/ASL contactors or NS/NSL contactor relays. A mechanical indicator allows to show the state of the contactor. Safe and cost-reduced wiring TEF3 electronic timers are supplied by a direct plug-in parallel connection to the coil terminals A1 - A2 of the contactor or contactor relay. A varistor is integrated on the timer to offer a built-in protection against surges in the contactor coil. Available for a wide control voltage range 24...240 V AC/DC TEF3-ON or TEF3-OFF allow time-delayed functions up to 100 s in 3 distinct time ranges, independently of the control system. The time delay ranges are selected by a switch and the time delay can be adjusted by means of a rotary switch. The timing function is activated by closing or opening the device on which the timer is mounted. The OFF-delay version operates without additional control supply. 44.2 1.74" 1SBC101337F0010 Description ABB | 4/77 Electronic timers Technical data Contact utilization characteristics according to IEC Types Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated impulse withstand voltage Uimp Rated operational voltage Ue max. Rated frequency (without derating) Conventional thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 24-127 V 50/60 Hz 220-240 V 50/60 Hz Making capacity acc. to IEC 60947-5-1 Breaking capacity acc. to IEC 60947-5-1 Ie / Rated operational current DC-13 TEF3-OFF 3 A 1.5 A 10 x Ie AC-15 10 x Ie AC-15 1 A / 24 W 6 A for 1.0 s 8 A for 0.1 s 8 A 12 V / 3 mA 24 V DC 10-7 0.1 W ON-delay 24 V DC acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw θ = 40 °C Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Power dissipation per pole at 3 A Function diagram OFF-delay 150 ms min. Uc (A1 - A2) 1s min. Uc (A1 - A2) 100 ms min. 100 ms min. N.O. (67 - 68) N.O. (67 - 68) N.C. (55 - 56) N.C. (55 - 56) t t Bistable relay inside. Before use, once apply Uc then switch it off in order to initialize position of the contacts. Control circuit voltage AC control voltage 50/60 Hz DC control voltage Rated control circuit voltage Uc Average consumption Rated control circuit voltage Uc Average consumption Rated frequency limits Supply voltage range Overvoltage protection Time delay range (t) selected by switch 24...240 V AC 1.5 mA RMS 24...240 V DC 1.5 mA 50 / 60 Hz 0.85...1.1 x Uc (at θ ≤ 70 °C) Varistor included 1 mA RMS 1 mA 0.1...1 s 1...10 s 10...100 s On-load reiteration accuracy under constant conditions Minimum ON period Recovery time Ambient air temperature Operation Storage Climatic withstand Maximum operating altitude Mounting positions Shock withstand ≤1% 0.1 s 1 s 0.15 s 0.1 s -25 °C ... +70 °C -40 °C ... +80 °C Category B according to IEC 60947-1 Annex Q 2000 m Mounting positions 1, 1 +/- 30°, 2, 3, 4, 5 1/2 sinusoidal shock for 11 ms: no change in contact position Same as contactor or contactor relay acc. to IEC 60068-2-27 and EN 60068-2-27 (Mounting position 1) Vibration withstand 5...300 Hz 3 g closed position / 2 g open position acc. to IEC 60068-2-6 Mechanical durability Number of operating cycles Max. switching frequency Max. electrical switching frequency 5 millions operating cycles 3600 cycles/h AC-15 DC-13 4/78 | ABB 1200 cycles/h 900 cycles/h 1800 cycles/h 1SBC101505S0201 - Rev. A 4 TEF3-ON IEC 60947-5-1 and EN 60947-5-1 400 V 4 kV 240 V 50 / 60 Hz 5 A Electronic timers Technical data Contact utilization characteristics according to UL / CSA Types Standards Rated insulation voltage Ui acc. to UL / CSA Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking TEF3-ON UL 508, CSA C22.2 N°14 300 V 240 V B300, R300 5A 3600 VA 360 VA 1A 28 VA TEF3-OFF 4 Connecting characteristics Connection capacity (min. ... max.) Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule l L Lugs Connection capacity acc. to UL / CSA Stripping length Tightening torque Recommended Max. 1x 2x 1x 2x 1x 2x L≤ l> 1 or 2 x 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 7.7 mm 3.2 mm AWG 18...14 9 mm 1 N.m / 9 lb.in 1.20 N.m Degree of protection Screw terminals All terminals Screwdriver type Terminal Marking IP20 Delivered in open position, screws of unused terminals should be tightened M3 Flat Ø 5.5 / Pozidriv 2 A1 55 NC 67 NO KM1 A2 A1 55 NC 67 NO 56 NC 68 NO KM1 56 NC 68 NO A2 1SBC101505S0201 - Rev. A acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 ABB | 4/79 Surge suppressors for contactor coils Description (V) 1000 T (µs) 0 1000 0 100 4 100 The operation of inductive circuits causes overvoltages, in particular on opening the contactor coil. The electromagnetic energy stored in the coil during contactor closing is restored on opening in the form of surges, the slope and amplitude of which may rise to several kilovolts. A number of drawbacks are observed ranging from interference on the electronic devices to the breakdown of insulators and even the destruction of certain sensitive components. The graph opposite reproduces the oscillogram showing voltage discharges at the terminals of a 42 V / 50 Hz coil without peak clipping. The coil was switched by 8 series-connected poles of a contactor relay. Following a burst of discharges with a very steep slope, a damped oscillation emerges with a peak value of 3500 V. Overvoltage Factor The overvoltage factor k is defined as the ratio of the maximum overvoltage peak value Ûs to the peak value Ûc of the coil rated control voltage Uc: 1SBC101042F0014 RC5-1 k = For example the following is obtained for the above graph: 3500 ≈ 60 42 √2 To reduce the harmful effects of these overvoltages, ABB has developed a range of surge suppressors designed to reduce the k factor defined above and to limit or even completely eliminate the high pre-damping voltage frequencies. Each case is different, but the technical data tolerances and generous sizing of parts have enabled us to reduce the number of variants. We have chosen the following solutions: transil diodes, varistors and RC blocks. Note: A varistor is a resistor whose value decreases to a very large extent when a certain voltage is applied at its terminals. Ordering details For contactors For contactor relays AS, ASL NS, NSL AS NS ASL NSL Rated control circuit voltage - Uc V 24...50 50...133 110...250 250...440 24...50 50...133 110...250 250...440 12...32 25...65 50...90 77...150 150...264 RT5 Main dimensions AC ● ● ● ● ● ● ● ● – – – – – DC ● ● ● ● – – – – ● ● ● ● ● Type Order code Pkg qty Weight (1 pce) RV5/50 RV5/133 RV5/250 RV5/440 RC5-1/50 RC5-1/133 RC5-1/250 RC5-1/440 RT5/32 RT5/65 RT5/90 RT5/150 RT5/264 1SBN050010R1000 1SBN050010R1001 1SBN050010R1002 1SBN050010R1003 1SBN050100R1000 1SBN050100R1001 1SBN050100R1002 1SBN050100R1003 1SBN050020R1000 1SBN050020R1001 1SBN050020R1002 1SBN050020R1003 1SBN050020R1004 2 2 2 2 2 2 2 2 2 2 2 2 2 kg 0.015 0.015 0.015 0.015 0.012 0.012 0.012 0.012 0.015 0.015 0.015 0.015 0.015 mm, inches 45 1.77" 45 1.77" 68 2.68" 72.5 2.85" 4/80 | ABB Ûs max. in AC k = Uc √2 Easy connection to the coil terminals (parallel mounting) Clip-on for both fixing and connection. No additional space Clipped onto the right side part of the contactor base without changing contactor overall dimensions and keeping a free access to coil terminals. 1SBC101494S0201 1SBC101042F0014 RV5 Ûs max. in DC k = Uc 68 2.68" 1SBC101042F0014 Ûs max. k = Ûc Surge suppressors for contactor coils Technical data Varistor RV5/50 RV5/133 RV5/250 RV5/440 24...50 V AC 50...133 V AC 110...250 V AC 250...440 V AC 24...50 V DC 50...133 V DC 110...250 V DC 250...440 V DC 132 V AC 270 V AC 480 V AC 825 V AC 132 V DC 270 V DC 480 V DC 825 V DC none -20...+70 °C High energy absorption: good damping - Unpolarized system Clipping as from Uvdr*, thus voltage front up to this point *Uvdr = Varistor operating voltage (voltage dependent resistor), tolerance ± 10 % Rated control circuit voltage Uc Residual overvoltage (clipping voltage) Opening time growth factor Operating temperature Advantages Drawback 4 RC type RC5-1/50 RC5-1/133 RC5-1/250 RC5-1/440 24...50 V AC 50...133 V AC 110...250 V AC 250...440 V AC 2 to 3 x Uc max. 2...3 -20...+70 °C Very fast clipping - Attenuation of steep fronts and thus of high frequencies Rated control circuit voltage Uc Residual overvoltage (clipping voltage) Opening time growth factor Operating temperature Advantages Transil diode RT5/32 RT5/65 RT5/90 RT5/150 12...32 V DC 25...65 V DC 50...90 V DC 77...150 V DC 50 V DC 100 V DC 150 V DC 210 V DC 1.1...1.2 -20...+70 °C Good energy absorption - Unpolarized system - Simple, reliable system Delay on drop out which does not however reduce contactor breaking capacity Rated control circuit voltage Uc Residual overvoltage (clipping voltage) Opening time growth factor Operating temperature Advantages Drawback RT5/264 150...264 V DC 390 V DC Wiring diagrams RC type E0734D A2 A2 Transil diode 1SBC101602S0201 Varistor E0735D A2 A1 A1 E0733D A1 ABB | 4/81 Mechanical interlock unit and other accessories Mechanical interlock unit When mounted between two contactors without additional width, the VM3 mechanical interlock unit prevents one of the contactors from closing as long as the other contactor is closed. The mechanical interlock unit includes 2 fixing clips. VM3 Ordering details For contactors Left AS ASL 4 Right AS ASL Type Order code Pkg qty Weight (1 pce) VM3 1SBN031005T1000 10 0.002 Weight (1 pce) kg Note : VM3 mechanical durability, 5 millions of operating cycles on both reversing contactors. Fixing clips BB3 is a set of 50 fixing clips. Ordering details For contactors Type Order code Pkg qty AS, ASL BB3 1SBN111020R1000 1 0.009 kg Test block BDT4 test block is suitable for switching on contactor off-load. Marking on the block indicates the contactor type to fit with. BB3 1SBC100043V0014 Ordering details For contactors Type Order code Pkg qty Weight (1 pce) AS, ASL, NS, NSL BDT4 1SBN110122T1000 10 kg 0.007 Function markers Box of 16 blank cards (16 markers by card) printable on HTP500 thermal transfer printer and AMS 500 marking table to identify your contactors, overload relays or manual motor starters. Marker dimensions: 7 x 20 mm (.276" x .787"). BDT4 1SNC160101F0014 Ordering details For contactors Type Order code Pkg qty AS, ASL, NS, NSL AMS 500 support plate for 8 BA4 HTP500 support plate BA4 SPRC 1 HTP500-BA4 1SNA235156R2700 1SNA360010R1500 1SNA235712R2400 16 1 1 Weight (1 pce) kg 0.011 0.220 0.290 1SBC101496S0201 - Rev. A BA4 4/82 | ABB Connection accessories for starting solutions 1SBC101034F0014 Connecting links The BEA16-3 insulated 3-pole connecting links are used to connect an AC or DC operated contactors with manual motor starters. The connecting links ensure the electrical and mechanical connection between the contactor and the manual motor starter. Ordering details BEA16-3 For contactors Manual motor starter Type AS09 ... AS16 ASL09 ... ASL16 MS116-0.16 ... MS116-16 BEA16-3 MS132-0.16 ... MS132-16 Order code Pkg qty 1SBN081006T1000 10 Weight (1 pce) kg 0.019 4 Connection sets for reversing contactors 1SBC101071F0014 The BER16C-3 connection sets are used for the connections between the main poles of two 3-pole contactors mounted side by side as reversing contactors, including electrical interlocking between built-in N.C. auxiliary contact and coil terminals. The connection sets are made up of: – – 1 upstream and 1 downstream connections: insulated, solid copper bars, – – 2 connections to realize electrical interlocking between contactors equipped with built-in N.C. auxiliary contacts, – – 2 fixing clips. BER16C-3 Ordering details For contactors Mechanical interlock unit Type Order code Pkg qty 2 x AS09 … AS16 2 x ASL09 … ASL16 with or without VM3 BER16C-3 1SBN081012R1000 1 Weight (1 pce) kg 0.035 BEY16C-3 BEY16C-3 connection sets are designed for star-delta starters whose contactors are assembled according to line delta star mounting. The connection sets are made up of: – – L ine contactor / delta contactor: upstream phase-to-phase connection, – – D elta contactor / star contactor: downstream connection in parallel, – – Star contactor: star point upstream, – – A n electrical interlocking between delta and star contactors equipped with built-in N.C. auxiliary contacts, – – 4 fixing clips. Ordering details For contactors Line AS09 AS12 Delta AS09 AS12 Star AS09 AS09 Mech. interlock unit between star & delta contactors with or without VM3 Type Order code Pkg qty Weight (1 pce) kg BEY16C-3 1SBN081018R2000 1 0.041 1SBC101495S0201 1SBC101070F0014 Connection sets for star-delta starting ABB | 4/83 Voltage code table The below tables indicate the available coil voltages and corresponding digits for order codes. When placing an order, please give either type or order code. Select a standard contactor from ordering detail pages. Change the coil voltage code in the type or in the order code according to the table below. Example: for contactor AS09-30-10 and coil 42 V 50/60 Hz, type is AS09-30-10-21 and order code is 1SBL101001R2110. 3-pole contactors Auxiliary contacts N.O. N.C. Type AS16 - 30 - 10 - 26 1SBL121001R 26 10 N.O. N.C. Main contacts Contactor type AS AC operated ASL DC operated 80 81 83 84 86 87 88 89 DC coil code 12 V 24 V 48 V 60 V 110 V 125 V 220 V 240 V 80 81 83 84 86 87 88 89 DC coil code 12 V (1) 24 V 48 V 60 V 110 V 125 V 220 V 240 V 3-pole reversing contactors Type Order code VAS12 S EM - 26 M 1SBK113800M 26 00 Surge suppressor VAS VASL Contactor type AC operated DC operated Contactor relays Type NS 40 E - 26 N.O. N.C. Number contacts Contactor type NS AC operated NSL DC operated 4/84 | ABB Order code 1SBH101001R 26 40 AC coil code 50 Hz 60 Hz 20 24 V 24 V 21 42 V 42 V 22 48 V 48 V 23 110 V 110 V 24 115 V 115 V 16 – 120 V 25 220 V 220 V 26 230 V 230 V 27 240 V 240 V 17 – 277 V 13 380 V – 28 400 V 400 V 29 415 V 415 V AC coil code 50 Hz 60 Hz 20 24 V 24 V 21 42 V 42 V 22 48 V 48 V 23 110 V 110 V 24 115 V 115 V 16 – 120 V 25 220 V 220 V 26 230 V 230 V 27 240 V 240 V 17 – 277 V 13 380 V – 28 400 V 400 V 29 415 V 415 V (1) Not for VASL..SEM 80 81 83 84 86 87 88 89 DC coil code 12 V 24 V 48 V 60 V 110 V 125 V 220 V 240 V 1SBC101600S0201 4 Order code AC coil code 50 Hz 60 Hz 20 24 V 24 V 21 42 V 42 V 22 48 V 48 V 23 110 V 110 V 24 115 V 115 V 16 – 120 V 25 220 V 220 V 26 230 V 230 V 27 240 V 240 V 17 – 277 V 13 380 V – 28 400 V 400 V 29 415 V 415 V Notes N17 4 ABB | 4/85 Summary_5 5 5/0 | ABB AF, EK contactors and NF contactor relays Motor starting solution, in kit form DOL and reversing starters protected by manual motor starters 5/4 DOL starters protected by moulded-case circuit-breakers 5/16 DOL and reversing starters protected by overload relays 5/32 Star-delta starters protected by overload relays 5/56 AF 3-pole contactors Contents 5/79 Overview 3-pole contactors 5/80 Ordering details 3-pole contactors 5/82 Technical data 3-pole contactors 5/120 Terminal marking and positioning 5/141 Main dimensions 5/144 5 AF and EK 4-pole contactors Contents 5/179 Overview 4-pole contactors 5/180 Ordering details 4-pole contactors 5/182 Technical data 4-pole contactors 5/206 Terminal marking and positioning 5/216 Main dimensions 5/220 Contactors for DC switching General description 5/235 AF and EK selection table for DC switching 5/238 Ordering details GA75 ... GAF2050 5/242 Technical data 5/248 Terminal marking and positioning 5/255 Main dimensions 5/256 Contactors for capacitor switching Contents 5/263 Overview 5/264 UA16..RA up to UA110..RA - Unlimited peak Î 5/266 UA16 up to UA110 - Peak current Î ≤ 100 times the rms current 5/276 Other contactor application data 5/287 NF contactor relays Contents 5/303 Ordering details 5/304 Technical data 5/312 Terminal marking and positioning 5/315 Main dimensions 5/317 Accessories NF contactor relays 5/321 Accessories for UA, UA..RA, GA and GAF contactors 5/357 Accessories for EK550, EK1000 contactors 5/381 Voltage code table 5/392 Questionnaire for product specifications 5/396 ABB | 5/1 Summary_5 Accessories for AF09 ... AF2650 contactors and Summary_5-1 5 5/2 | ABB Motor starting solution, in kit form DOL and reversing starters protected by manual motor starters General 5/4 Selection tables 5/6 Wiring diagrams 5/10 Dimension drawings 5/11 DOL starters protected by moulded-case circuit-breakers and overload relays General 5/16 Selection tables 5/18 Wiring diagrams 5/22 5 Dimension drawings, starter protected by MCCB including motor protection 5/23 MCCB (magnetic only) and thermal overload relays 5/25 DOL and reversing starters protected by overload relays General 5/32 Selection tables 5/34 Switching frequency diagrams for overload relays 5/38 Wiring diagrams 5/39 Dimension drawings, starter protected by Thermal overload relays 5/40 Electronic overload relays 5/46 Star-delta starters protected by overload relays General 5/56 Selection tables 5/58 Switching frequency diagrams for overload relays 5/62 Wiring diagrams 5/63 Dimension drawings, starter protected by 5/65 Electronic overload relays 5/70 Summary_5-1 Thermal overload relays ABB | 5/3 DOL and reversing starters protected by manual motor starters With AF contactors - open type version in kit form Application I> Full voltage direct-on-line (DOL) starting and reversing starting for controlling three-phase asynchronous motors is a simple and economic solution characterised by a high starting torque (1.9 to 2.1 times full-speed torque) and a starting current 5.5 to 7 times nominal current. I/In C/Cn 7 6 I 5 I = current C = torque In = nominal current Cn = nominal torque 4 3 2 1SFC101102V0001 5 C 1 0 DOL starter MS132-10 + BEA16-4 + AF09-30-10 10 30 60 80 100 Coordination types The contactor and the manual motor starter control and protect motors against overload and short-circuits according to coordination types 1 and 2 (IEC 60947-4-1 / EN 60947-4-1) defining the anticipated level of service continuity as follow: Type 1: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will not be able to then operate without being repaired or having parts replaced. Type 2: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will be able to operate afterwards. The risk of contacts light welding is acceptable. I> Main Technical Data 1SFC101105V0001 Standards Rated operational voltage Ue max. Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Switching frequency Ambient air temperature Close to the device use with MS116 use with MS132, MS450, MS495 Degree of protection IEC 60947-4-1 / EN 60947-4-1 690 V - 50/60 Hz 690 V 600 V ≤ 15 starts/hour - 80 % max. load factor - with max. 1.5 s starting time ≤ 30 starts/hour - 50 % max. load factor - with max. 1.5 s starting time ≤ 55 °C ≤ 60 °C IP20 Reversing starter MS132-10 + BEA16-4 + BER16-4 + VEM4 + AF09-30-10 Mounting positions +30° -30° -30° Pos. 4 Pos. 4 Pos. 3 Pos. 1 Pos. 1 ± 30° Pos. 5 DOL starters Pos. 1 Pos. 1 ± 30° Pos. 5 Reversing starters 1SBC101917S0201 Pos. 3 5/4 | ABB +30° Pos. 2 Pos. 2 DOL and reversing starters protected by manual motor starters With AF contactors - open type version in kit form Direct-on-line starters Description I> MS Manual motor starter You can easily assemble a direct-on-line starter by using the BEA..-4 connecting link 3-pole insulated. It is used to electrically and mechanically connect MS116 or MS132 manual motor starter and AF09 ... AF38 contactor, AC or DC operated. BEA Connecting link 5 AF09 ... AF38 Contactor Reversing starters Description I> MS Manual motor starter Fixing clip BEA Connecting link You can easily assemble reversing starter thanks to our complete range of accessories: –– BEA..-4 connecting link 3-pole insulated: it is used to electrically and mechanically connect MS116 or MS132 manual motor starter and AF09 ... AF38 contactor, AC or DC operated –– For AF09 ... AF38, use VEM4 mechanical and electrical interlock set for reversing starter in 90 mm width. It includes: -- VM4 mechanical interlock unit including 2 fixing clips -- VE4 electrical interlock block with A2-A2 connection. –– For AF40 ... AF96, use VM96-4 mechanical interlock unit and additional auxiliary contact blocks for electrical interlocking –– BER..-4 connection set: it assures a safe and simple reversing connection between both contactor main terminals. VM4 Mechanical interlock unit AF09 ... AF38 Contactor VE4 Electrical interlock block A2 BER..-4 Connection set Select now easily and quickly your starter in the following pages for coordination type 1 or 2 at 400 V, 50 / 60 Hz, Iq = 16 kA up to 18.5 kW and Iq = 50 kA up to 45 kW. For the full coordination tables: www.abb.com/lowvoltage then go to the right menu: "Support", select: "Online Product Selection Tools" then select "Coordination Tables for motor protection" ABB | 5/5 1SBC101917S0201 A2 DOL starters protected by MS manual motor starters Coordination type 1 Coordination type 1, AC-3, 16 kA or 50 kA, 400 V, 50/60 Hz Contactors Accessories I> 5 BEA..-4 Current setting range Magnetic Rated control circuit tripping voltage current Uc min. ... Uc max. 1SAM350000R1002 A 0.16...0.25 A 2.44 MS132-0.4 1SAM350000R1003 0.25...0.40 3.9 0.44 MS132-0.63 1SAM350000R1004 0.40...0.63 6.14 0.18 0.6 MS132-0.63 1SAM350000R1004 0.40...0.63 6.14 0.25 0.85 MS132-1.0 1SAM350000R1005 0.63...1.00 11.5 0.37 1.1 MS132-1.6 1SAM350000R1006 1.00...1.60 18.4 0.55 1.5 MS132-1.6 1SAM350000R1006 1.00...1.60 18.4 0.75 1.9 MS132-2.5 1SAM350000R1007 1.60...2.50 28.75 1.1 2.7 MS132-4.0 1SAM350000R1008 2.50...4.00 50 1.5 3.6 MS132-4.0 1SAM350000R1008 2.50...4.00 50 2.2 4.9 MS132-6.3 1SAM350000R1009 4.00...6.30 78.75 3 6.5 MS132-10 1SAM350000R1010 6.30...10.0 150 4 8.5 MS132-10 1SAM350000R1010 6.30...10.0 150 5.5 11.5 MS132-12 1SAM350000R1012 8.00...12.0 180 7.5 15.5 MS132-16 1SAM350000R1011 10.0...16.0 240 11 22 MS132-25 1SAM350000R1014 20.0...25.0 375 IEC Type (1) AC-3, 400 V Rated operational power current kW A 0.06 0.2 MS132-0.25 0.09 0.3 0.12 Order code Order code AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF12Z-30-10-21 AF12-30-10-13 AF16Z-30-10-21 AF16-30-10-13 AF26Z-30-00-21 AF26-30-00-13 AF30Z-30-00-21 AF30-30-00-13 AF38Z-30-00-21 AF38-30-00-13 AF52-30-00-11 AF52-30-00-13 AF65-30-00-11 AF65-30-00-13 AF80-30-00-11 AF80-30-00-13 AF80-30-00-11 AF80-30-00-13 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL156001R2110 1SBL157001R1310 1SBL176001R2110 1SBL177001R1310 1SBL236001R2100 1SBL237001R1300 1SBL276001R2100 1SBL277001R1300 1SBL296001R2100 1SBL297001R1300 1SBL367001R1100 1SBL367001R1300 1SBL387001R1100 1SBL387001R1300 1SBL397001R1100 1SBL397001R1300 1SBL397001R1100 1SBL397001R1300 (3) (2) 15 29 MS132-32 1SAM350000R1015 25.0...32.0 480 18.5 35 MS450-40 1SAM450000R1005 28.0…40.0 520 22 41 MS450-50 1SAM450000R1007 36.0…50.0 650 30 55 MS495-63 1SAM550000R1007 45.0…63.0 819 37 66 MS495-75 1SAM550000R1008 57.0…75.0 975 45 80 MS495-90 1SAM550000R1009 70.0…90.0 1170 (1) (2) (3) Type V 50/60 Hz 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24…60 100...250 24…60 100...250 24…60 100...250 24…60 100...250 24…60 100...250 V DC 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20…60 100...250 20…60 100...250 20…60 100...250 20…60 100...250 20…60 100...250 MS116 manual motor starter can be selected according to the current setting range indicated on the coordination line, up to: - 15 kW, 400 V - AC-3 at 16 kA - 4 kW, 400 V - AC-3 at 50 kA. For other control voltages, see "Voltage code table". AF40 3-pole contactor can be selected for coordination type 1, 16 kA and 50 kA, 18.5 kW, 400 V - AC-3. 5/6 | ABB Allowed Type setting current A 0.25 CA4-10 Order code BEA16-4 1SBN081306T1000 BEA38-4 CA4-10 1SBN082306T2000 1SBN010110R1010 CA4-10 1SBN010110R1010 0.4 0.63 0.63 1 1.6 1.6 2.5 4 4 6.3 9 9 12 16 25 + 32 38 50 63 75 80 1SBC101913S0201 - Rev. A Manual motor starters DOL starters protected by MS manual motor starters Coordination type 2 Coordination type 2, AC-3, 16 kA or 50 kA, 400 V, 50/60 Hz Manual motor starters Contactors Accessories I> BEA..-4 Current setting range Magnetic Rated control circuit tripping voltage current Uc min. ... Uc max. 1SAM350000R1002 A 0.16...0.25 A 2.44 MS132-0.4 1SAM350000R1003 0.25...0.40 3.9 0.44 MS132-0.63 1SAM350000R1004 0.40...0.63 6.14 0.18 0.6 MS132-0.63 1SAM350000R1004 0.40...0.63 6.14 0.25 0.85 MS132-1.0 1SAM350000R1005 0.63...1.00 11.5 0.37 1.1 MS132-1.6 1SAM350000R1006 1.00...1.60 18.4 0.55 1.5 MS132-1.6 1SAM350000R1006 1.00...1.60 18.4 0.75 1.9 MS132-2.5 1SAM350000R1007 1.60...2.50 28.75 1.1 2.7 MS132-4.0 1SAM350000R1008 2.50...4.00 50 IEC Type (1) AC-3, 400 V Rated operational power current kW A 0.06 0.2 MS132-0.25 0.09 0.3 0.12 Order code Type Order code AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF26Z-30-00-21 AF26-30-00-13 AF26Z-30-00-21 AF26-30-00-13 AF26Z-30-00-21 AF26-30-00-13 AF26Z-30-00-21 AF26-30-00-13 AF26Z-30-00-21 AF26-30-00-13 AF26Z-30-00-21 AF26-30-00-13 AF30Z-30-00-21 AF30-30-00-13 AF30Z-30-00-21 AF30-30-00-13 AF30Z-30-00-21 AF30-30-00-13 AF38Z-30-00-21 AF38-30-00-13 AF52-30-00-11 AF52-30-00-13 AF65-30-00-11 AF65-30-00-13 AF80-30-00-11 AF80-30-00-13 AF96-30-00-11 AF96-30-00-13 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL236001R2100 1SBL237001R1300 1SBL236001R2100 1SBL237001R1300 1SBL236001R2100 1SBL237001R1300 1SBL236001R2100 1SBL237001R1300 1SBL236001R2100 1SBL237001R1300 1SBL236001R2100 1SBL237001R1300 1SBL276001R2100 1SBL277001R1300 1SBL276001R2100 1SBL277001R1300 1SBL276001R2100 1SBL277001R1300 1SBL296001R2100 1SBL297001R1300 1SBL367001R1100 1SBL367001R1300 1SBL387001R1100 1SBL387001R1300 1SBL397001R1100 1SBL397001R1300 1SBL407001R1100 1SBL407001R1300 (3) (2) 1.5 3.6 MS132-4.0 1SAM350000R1008 2.50...4.00 50 2.2 4.9 MS132-6.3 1SAM350000R1009 4.00...6.30 78.75 3 6.5 MS132-10 1SAM350000R1010 6.30...10.0 150 4 8.5 MS132-10 1SAM350000R1010 6.30...10.0 150 5.5 11.5 MS132-12 1SAM350000R1012 8.00...12.0 180 7.5 15.5 MS132-16 1SAM350000R1011 10.0...16.0 240 11 22 MS132-25 1SAM350000R1014 20.0...25.0 375 15 29 MS132-32 1SAM350000R1015 25.0...32.0 480 18.5 35 MS450-40 1SAM450000R1005 28.0…40.0 520 22 41 MS450-50 1SAM450000R1007 36.0…50.0 650 30 55 MS495-63 1SAM550000R1007 45.0…63.0 819 37 66 MS495-75 1SAM550000R1008 57.0…75.0 975 45 80 MS495-90 1SAM550000R1009 70.0…90.0 1170 V 50/60 Hz 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24…60 100…250 24…60 100…250 24…60 100…250 24…60 100…250 24…60 100…250 V DC 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20…60 100…250 20…60 100…250 20…60 100…250 20…60 100…250 20…60 100…250 Allowed Type setting (4) current A 0.25 CA4-10 Order code BEA16-4 1SBN081306T1000 + BEA26-4 CA4-10 1SBN082306T1000 1SBN010110R1010 + BEA38-4 CA4-10 1SBN082306T2000 1SBN010110R1010 CA4-10 1SBN010110R1010 5 0.4 0.63 0.63 1 1.6 1.6 2.5 4 4 6.3 10 10 12 16 25 32 40 50 63 75 90 1SBC101914S0201 - Rev. A (1) MS116 manual motor starter can be selected according to the current setting range indicated on the coordination line, up to - 15 kW 400V - AC-3 at 16 kA - 4 kW, 400 V - AC-3 at 50 kA. (2) For other control voltages, see "Voltage code table". (3) AF26 3-pole contactor can be selected for coordination type 2, 16 kA, 7.5 kW, 400 V - AC-3. AF40 3-pole contactor can be selected for coordination type 2, 16 kA and 50 kA, 18.5 kW, 400 V - AC-3. (4) BEA26-4 should be selected with MS116-12 … MS116-16 and AF26 … AF38. BEA38-4 can only be selected with MS116-20 … MS116-32. ABB | 5/7 Reversing starters protected by MS manual motor starters Coordination type 1 Coordination type 1, AC-3, 16 kA or 50 kA, 400 V, 50/60 Hz Manual motor starters Contactors Accessories + I> BEA..-4 BER..-4 VEM4 Order code 1SAM350000R1002 Current setting range Magnetic Rated control circuit tripping voltage current Uc min. ... Uc max. A 0.16...0.25 A 2.44 Order code AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF12Z-30-10-21 AF12-30-10-13 AF16Z-30-10-21 AF16-30-10-13 AF26Z-30-00-21 AF26-30-00-13 AF30Z-30-00-21 AF30-30-00-13 AF38Z-30-00-21 AF38-30-00-13 AF52-30-00-11 AF52-30-00-13 AF65-30-00-11 AF65-30-00-13 AF80-30-00-11 AF80-30-00-13 AF80-30-00-11 AF80-30-00-13 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL156001R2110 1SBL157001R1310 1SBL176001R2110 1SBL177001R1310 1SBL236001R2100 1SBL237001R1300 1SBL276001R2100 1SBL277001R1300 1SBL296001R2100 1SBL297001R1300 1SBL367001R1100 1SBL367001R1300 1SBL387001R1100 1SBL387001R1300 1SBL397001R1100 1SBL397001R1300 1SBL397001R1100 1SBL397001R1300 (3) (2) 0.09 0.3 MS132-0.4 1SAM350000R1003 0.25...0.40 3.9 0.12 0.44 MS132-0.63 1SAM350000R1004 0.40...0.63 6.14 0.18 0.6 MS132-0.63 1SAM350000R1004 0.40...0.63 6.14 0.25 0.85 MS132-1.0 1SAM350000R1005 0.63...1.00 11.5 0.37 1.1 MS132-1.6 1SAM350000R1006 1.00...1.60 18.4 0.55 1.5 MS132-1.6 1SAM350000R1006 1.00...1.60 18.4 0.75 1.9 MS132-2.5 1SAM350000R1007 1.60...2.50 28.75 1.1 2.7 MS132-4.0 1SAM350000R1008 2.50...4.00 50 1.5 3.6 MS132-4.0 1SAM350000R1008 2.50...4.00 50 2.2 4.9 MS132-6.3 1SAM350000R1009 4.00...6.30 78.75 3 6.5 MS132-10 1SAM350000R1010 6.30...10.0 150 4 8.5 MS132-10 1SAM350000R1010 6.30...10.0 150 5.5 11.5 MS132-12 1SAM350000R1012 8.00...12.0 180 7.5 15.5 MS132-16 1SAM350000R1011 10.0...16.0 240 11 22 MS132-25 1SAM350000R1014 20.0...25.0 375 15 29 MS132-32 1SAM350000R1015 25.0...32.0 480 18.5 35 MS450-40 1SAM450000R1005 28.0…40.0 520 22 41 MS450-50 1SAM450000R1007 36.0…50.0 650 30 55 MS495-63 1SAM550000R1007 45.0…63.0 819 37 66 MS495-75 1SAM550000R1008 57.0…75.0 975 45 80 MS495-90 1SAM550000R1009 70.0…90.0 1170 (1) (2) (3) Type V 50/60 Hz 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24…60 100…250 24…60 100…250 24…60 100…250 24…60 100…250 24…60 100…250 V DC 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20…60 100…250 20…60 100…250 20…60 100…250 20…60 100…250 20…60 100…250 MS116 manual motor starter can be selected according to the current setting range indicated on the coordination line, up to: - 15 kW, 400 V - AC-3 at 16 kA - 4 kW, 400 V - AC-3 at 50 kA. For other control voltages, see "Voltage code table". AF40 3-pole contactor can be selected for coordination type 1, 16 kA and 50 kA, 18.5 kW, 400 V - AC-3. 5/8 | ABB Allowed Type setting current A 0.25 0.4 Order code BEA16-4 BER16-4 VEM4 1SBN081306T1000 1SBN081311R1000 1SBN030111R1000 BEA38-4 BER38-4 + VEM4 + + 2x CA4-10 1SBN082306T2000 1SBN082311R1000 1SBN030111R1000 1SBN010110R1010 BER38-4 VEM4 CA4-10 BER65-4 VM96-4 + + 2x CA4-10 + 2x CA4-01 1SBN082311R1000 1SBN030111R1000 1SBN010110R1010 1SBN083411R1000 1SBN033405T1000 1SBN010110R1010 1SBN010110R1001 BER96-4 VM96-4 + + 2x CA4-10 + 2x CA4-01 1SBN083911R1000 1SBN033405T1000 1SBN010110R1010 1SBN010110R1001 + + 0.63 0.63 1 1.6 1.6 2.5 4 4 6.3 9 9 12 16 25 32 38 50 63 75 80 + + 2x 1SBC101915S0201 - Rev. A 5 IEC Type (1) AC-3, 400 V Rated operational power current kW A 0.06 0.2 MS132-0.25 CA4-10 Reversing starters protected by MS manual motor starters Coordination type 2 Coordination type 2, AC-3, 16 kA or 50 kA, 400 V, 50/60 Hz Manual motor starters Contactors Accessories + I> BEA..-4 BER..-4 VEM4 IEC Type (1) AC-3, 400 V Rated operational power current kW A 0.06 0.2 MS132-0.25 Order code 1SAM350000R1002 Current setting range Magnetic Rated control circuit tripping voltage current Uc min. ... Uc max. A A 0.16...0.25 2.44 0.09 0.3 MS132-0.4 1SAM350000R1003 0.25...0.40 3.9 0.12 0.44 MS132-0.63 1SAM350000R1004 0.40...0.63 6.14 0.18 0.6 MS132-0.63 1SAM350000R1004 0.40...0.63 6.14 0.25 0.85 MS132-1.0 1SAM350000R1005 0.63...1.00 11.5 0.37 1.1 MS132-1.6 1SAM350000R1006 1.00...1.60 18.4 0.55 1.5 MS132-1.6 1SAM350000R1006 1.00...1.60 18.4 0.75 1.9 MS132-2.5 1SAM350000R1007 1.60...2.50 28.75 1.1 2.7 MS132-4.0 1SAM350000R1008 2.50...4.00 50 1.5 3.6 MS132-4.0 1SAM350000R1008 2.50...4.00 50 2.2 4.9 MS132-6.3 1SAM350000R1009 4.00...6.30 78.75 3 6.5 MS132-10 1SAM350000R1010 6.30...10.0 150 4 8.5 MS132-10 1SAM350000R1010 6.30...10.0 150 5.5 11.5 MS132-12 1SAM350000R1012 8.00...12.0 180 7.5 15.5 MS132-16 1SAM350000R1011 10.0...16.0 240 11 22 MS132-25 1SAM350000R1014 20.0...25.0 375 15 29 MS132-32 1SAM350000R1015 25.0...32.0 480 18.5 35 MS450-40 1SAM450000R1005 28.0…40.0 520 22 41 MS450-50 1SAM450000R1007 36.0…50.0 650 30 55 MS495-63 1SAM550000R1007 45.0…63.0 819 37 66 MS495-75 1SAM550000R1008 57.0…75.0 975 45 80 MS495-90 1SAM550000R1009 70.0…90.0 1170 Type (3) Order code (2) V 50/60 Hz 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24...60 100...250 24…60 100...250 24…60 100...250 24…60 100...250 24…60 100...250 24…60 100...250 V DC 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20...60 100...250 20…60 100...250 20…60 100...250 20…60 100...250 20…60 100...250 20…60 100...250 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF09Z-30-10-21 AF09-30-10-13 AF26Z-30-00-21 AF26-30-00-13 AF26Z-30-00-21 AF26-30-00-13 AF26Z-30-00-21 AF26-30-00-13 AF26Z-30-00-21 AF26-30-00-13 AF26Z-30-00-21 AF26-30-00-13 AF26Z-30-00-21 AF26-30-00-13 AF30Z-30-00-21 AF30-30-00-13 AF30Z-30-00-21 AF30-30-00-13 AF30Z-30-00-21 AF30-30-00-13 AF38Z-30-00-21 AF38-30-00-13 AF52-30-00-11 AF52-30-00-13 AF65-30-00-11 AF65-30-00-13 AF80-30-00-11 AF80-30-00-13 AF96-30-00-11 AF96-30-00-13 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL136001R2110 1SBL137001R1310 1SBL236001R2100 1SBL237001R1300 1SBL236001R2100 1SBL237001R1300 1SBL236001R2100 1SBL237001R1300 1SBL236001R2100 1SBL237001R1300 1SBL236001R2100 1SBL237001R1300 1SBL236001R2100 1SBL237001R1300 1SBL276001R2100 1SBL277001R1300 1SBL276001R2100 1SBL277001R1300 1SBL276001R2100 1SBL277001R1300 1SBL296001R2100 1SBL297001R1300 1SBL367001R1100 1SBL367001R1300 1SBL387001R1100 1SBL387001R1300 1SBL397001R1100 1SBL397001R1300 1SBL407001R1100 1SBL407001R1300 Allowed setting current Order code Type (4) 5 A 0.25 0.4 CA4-10 BEA16-4 BER16-4 VEM4 1SBN081306T1000 1SBN081311R1000 1SBN030111R1000 BEA26-4 BER38-4 + VEM4 + + 2x CA4-10 1SBN082306T1000 1SBN082311R1000 1SBN030111R1000 1SBN010110R1010 BEA38-4 + BER38-4 + VEM4 + 2x CA4-10 1SBN082306T2000 1SBN082311R1000 1SBN030111R1000 1SBN010110R1010 BER65-4 + VM96-4 + 2x CA4-10 + 2x CA4-01 1SBN083411R1000 1SBN033405T1000 1SBN010110R1010 1SBN010110R1001 BER96-4 + VM96-4 + 2x CA4-10 + 2x CA4-01 1SBN083911R1000 1SBN033405T1000 1SBN010110R1010 1SBN010110R1001 + + 0.63 0.63 1 1.6 1.6 2.5 4 4 6.3 10 10 12 16 25 32 40 50 63 75 90 1SBC101916S0201 - Rev. A (1) MS116 manual motor starter can be selected according to the current setting range indicated on the coordination line, up to - 15 kW 400V - AC-3 at 16 kA - 4 kW, 400 V - AC-3 at 50 kA. (2) For other control voltages, see "Voltage code table". (3) AF26 3-pole contactor can be selected for coordination type 2, 16 kA, 7.5 kW, 400 V - AC-3. AF40 3-pole contactor can be selected for coordination type 2, 16 kA and 50 kA, 18.5 kW, 400 V - AC-3. (4) BEA26-4 should be selected with MS116-12 … MS116-16 and AF26 … AF38. BEA38-4 can only be selected with MS116-20 … MS116-32. ABB | 5/9 DOL and reversing starters protected by manual motor starters With AF contactors - open type version in kit form Wiring diagrams Direct-on-line starters 5/L3 AC or DC local control AC or DC remote control KM1:5/L3 KM1:5/L3 33 33 43 44 Us 34 3/L2 1/L1 43 44 5/L3 33 34 3/L2 1-phase 1/L1 Power circuit Q1 34 Us 33 Q1 34 V M 13 13 KM1 KM1 14 I 14 I 43 Q1 KM1 44 Us N A2 Us N KM1 44 V M ~ Q1 KM1:3/L2 KM1:3/L2 U W 43 A2 14 A1 A1 13 5/L3 6/T3 14 A2 U O O 6/T3 3/L2 4/T2 4/T2 2/T1 1/L1 2/T1 5/L3 6/T3 13 3/L2 4/T2 6/T3 1/L1 2/T1 4/T2 I> I> I> A1 KM1 5 I> I> I> 2/T1 Q1 Note: coil Uc 12-20 V DC : A1+, A2- ~ Reversing starters Power circuit AC or DC local control 5/L3 33 43 44 Us 34 3/L2 1/L1 KM2:5/L3 33 Q1 34 O Q1 KM2 II .4 KM1 .4 I .3 .3 6/T3 4/T2 2/T1 I> I> I> 43 Q1 44 KM1 A2 V W M ~ (1) A2 KM1 21 21 KM2 KM2 KM1 A1 A1 A2 A2 KM2 (3) KM2:3/L2 U (2) 22 Us N 01 01 (2) 22 3/L2 1/L1 5/L3 6/T3 4/T2 2/T1 6/T3 4/T2 2/T1 A2 A1 5/L3 3/L2 KM2 A2 KM1 A1 1/L1 With VM With VEM4 AC or DC remote control KM2:5/L3 33 Q1 34 Us O .3 .3 II .4 KM2 .4 KM1 I A2 (1) A2 21 KM2 (3) Note: - VEM4 = VM4 (1) + VE4 (2) with A2-A2 (3) connection (Except for coil Uc 12-20 V DC : use VM4 with CA4). - coil Uc 12-20 V DC : A1+, A2- 5/10 | ABB KM1 KM1 A1 A1 A2 A2 KM2 1SBC101918S0201 KM2:3/L2 KM1 KM2 22 43 Q1 44 (2) 22 Us N 01 01 (2) 21 With VM With VEM4 DOL starters protected by M116 manual motor starters With AF contactors - open type version in kit form Main dimensions mm, inches 70 2.76" Ø 4.5 0.18" M4 8-32UNC 10 0.39" 186.8 7.35" 5.5 0.22" 35 mm EN/IEC 60715 45 1.77" 10 0.39" 75 2.95" 188 7.40" 17.5 0.69" 6 0.24" 80.1 3.15" 26.25 1.03" 5 5 0.20" 5 0.20" Ø 4.2 0.17" M4 8-32UNC 5.5 0.22" 45 1.77" 5 0.20" 77 3.03" 35 1.38" 5 0.20" MS116-0.16 ... MS116-16 + BEA16-4 + AF09, AF12, AF16 Ø 4.5 0.18" M4 8-32UNC 17.5 0.69" 6 0.24" 81.1 3.19"17.5 72.2 2.84" 0.69" 26.25 1.03" 10 0.39" 10 0.39" 186.8 7.35" 186.8 7.35" 45 1.77" 10 0.39" 5.5 0.22" 26.25 1.03" Ø 4.2 0.17" M4 8-32UNC Ø 4.2 0.17" M4 8-32UNC 35 5 0.20" 1.38" 86 3.39" 5.5 0.22" 5 0.20" 5 0.20" 45 1.77" 86 3.39" 5 0.20" 5 0.20" 5.5 0.22" 5 0.20" 45 1.77" Ø 4.5 0.18" M4 8-32UNC 10 0.39" 75 2.95" 35 mm EN/IEC 60715 5.5 0.22" 192 7.56" 188 7.40" 35 mm EN/IEC 60715 45 1.77" 75 2.95" 70 2.76" 6 0.24" 80.1 3.15" 5 0.20" 35 1.38" 5 0.20" 1SBC101919S0201 MS116-0.16 ... MS116-16 + BEA26-4 + AF26, AF30, AF38 Note: contactor lateral distance to grounded component 2 mm 0.08" min. ABB | 5/11 DOL starters protected by M132 manual motor starters With AF contactors - open type version in kit form mm, inches 6 0.24" Ø 4.5 0.18" M4 8-32UNC 10 0.39" 45 1.77" 26.25 1.03" 17.5 0.69" 5.5 0.22" 35 mm EN/IEC 60715 192 7.56" 10 0.39" 186.8 7.35" 5.5 0.22" 35 mm EN/IEC 60715 45 1.77" 81.1 3.19" 72.2 2.84" 10 0.39" 186.8 7.35" Ø 4.5 0.18" M4 8-32UNC 10 0.39" 75 2.95" 188 7.40" 17.5 0.69" 6 0.24" 81.3 3.20" 72.4 2.85" 75 2.95" Main dimensions 26.25 1.03" 5 Ø 4.2 0.17" M4 8-32UNC 5.5 0.22" 77 3.03" 5 0.20" 77 3.03" 5 0.20" 35 1.38" 5 0.20" Ø 4.5 0.18" 17.5 M4 8-32UNC0.69" 26.25 1.03" 10 0.39" 186.8 7.35" 186.8 7.35" 10 0.39" Ø 4.2 0.17" M4 8-32UNC 5.5 0.22" 86 3.39" 5 0.20" 35 1.38" 5 5 0.20" 0.20" 10 0.39" 5 0.20" 5 0.20" 5.5 0.22" 45 1.77" 86 3.39" 35 1.38" 5 0.20" MS132-12 ... MS132-32 + BEA38-4 + AF26, AF30, AF38 Note: contactor lateral distance to grounded component 2 mm 0.08" min. 5/12 | ABB 5 45 1.77" 0.20" 5 0.20" 35 1.38" 5 0.20" 5 0.20" Ø 4.2 0.17" M4 8-32UNC 1SBC101923S0201 86 3.39" 26.25 1.03" Ø 4.2 0.17" M4 8-32UNC 5 0.20" MS132-0.16 ... MS132-10 + BEA26-4 + AF26, AF30, AF38 5.5 0.22" 5 0.20" 45 1.77" Ø 4.5 0.18" M4 8-32UNC 10 0.39" 6 0.24" 17.5 0.69" 5.5 0.22" 35 mm EN/IEC 60715 26.25 1.03" 5.5 0.22" 35 mm EN/IEC 60715 192 7.56" 192 7.56" 10 0.39" 186.8 7.35" 35 mm EN/IEC 60715 5.5 0.22" 81.1 3.19" 72.2 2.84" 6 0.24" 81.1 3.19" 72.2 2.84" 45 1.77" 10 0.39" Ø 4.5 0.18" M4 8-32UNC 45 1.77" 17.5 0.69" 6 0.24" 75 2.95" 72.4 2.85" 45 1.77" 5.5 0.22" MS132-12 ... MS132-25 + BEA16-4 + AF09, AF12, AF16 81.3 3.20" 188 7.40" 5 45 1.77" 0.20" 75 2.95" MS132-0.16 ... MS132-10 + BEA16-4 + AF09, AF12, AF16 35 1.38" 75 2.95" 45 1.77" 5 0.20" 5 0.20" 5 0.20" 5 0.20" Ø 4.2 0.17" M4 8-32UNC Reversing starters protected by M116 manual motor starters With AF contactors - open type version in kit form Main dimensions mm, inches 75 2.95" Ø 4.5 0.18" M4 8-32UNC 45 1.77" 10 0.39" 70 2.76" 186.8 7.35" 5.5 0.22" 35 mm EN/IEC 60715 189.5 7.46" 17.5 0.69" 6 0.24" 97 3.82" 80.1 3.15" 10 0.39" 26.25 1.03" 5 17.5 0.69" 114 4.49" 80.1 3.15" 5 0.20" Ø 4.5 0.18" M4 8-32UNC Ø 4.5 0.18" M4 8-32UNC 10 0.39" 17.5 0.69" 26.25 1.03" 5 0.20" 5 0.20" 10 26.25 0.39" 1.03" 90 3.54" 90 3.54" 5.5 0.22" 5 0.20" 80 3.15" 5 5 0.20" 0.20" 5 0.20" 5 0.20" Ø 4.2 0.17" M4 8-32UNC 5 0.20" 5 0.20" Ø 4.2 0.17" M4 8-32UNC 70 2.76" 70 2.76" 10 0.39" 198 7.80" 5.5 0.22" 198 7.80" 45 1.77" 70 2.76" 35 mm EN/IEC 60715 5.5 0.22" 35 mm EN/IEC 60715 198 7.80" 198 7.80" 45 1.77" 75 2.95" 75 2.95" 114 4.49" 80.1 3.15" 70 2.76" 35 1.38" 10 0.39" MS116-0.16 ... MS116-16 + BEA16-4, BER16-4, VEM4 + AF09, AF12, AF16 5 0.20" 6 0.24" 3,8 0.15" 90 3.54" 6 0.24" 5 0.20" 5 0.20" Ø 4.2 0.17" M4 8-32UNC 80 3.15" 5 0.20" 5.5 0.22" 1SBC101924S0201 MS116-0.16 ... MS116-16 + BEA26-4, BER38-4, VEM4, CA4-10 + AF26, AF30, AF38 Note: contactor lateral distance to grounded component 2 mm 0.08" min. ABB | 5/13 Reversing starters protected by M132 manual motor starters With AF contactors - open type version in kit form mm, inches 81.1 3.19" 17.5 0.69" Ø 4.5 0.18" M4 8-32UNC 10 0.39" 10 0.39" 72.2 2.84" 45 1.77" 10 0.39" 70 2.76" 70 2.76" 5 26.25 1.03" 5 0.20" 26.25 1.03" 5 0.20" 10 0.39" 5.5 0.22" 35 mm EN/IEC 60715 193.5 186.8 7.62" 7.35" 35 mm EN/IEC 60715 5.5 0.22" Ø 4.2 0.17" M4 8-32UNC 5 0.20" 5 0.20" 17.5 17.5 0.69" 0.69" Ø 4.5 Ø 4.5 0.18" 0.18" M4M4 8-32UNC 8-32UNC 72.2 72.2 2.84" 2.84" 45 1.77" 45 1.77" 5 5 0.20" 0.20" 26.25 26.25 1.03" 1.03" 70 70 2.76" 2.76" 10 10 0.39" 0.39" 70 2.76" 5 0.20" 26.25 1.03" 186.8 7.35" 186.8 7.35" 201.5 7.93" 201.5 186.87.93" 7.35" 10 0.39" 5.55.5 0.22" 0.22" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 5,5 0.22" 35 mm EN/IEC 60715 81.1 81.1 3.19" 3.19" 10 0.39" 72.4 2.85" Ø 4.5 0.18" M4 8-32UNC MS132-0.16 ... MS132-10 + BEA26-4, BER38-4, VEM4, CA4-10 + AF26, AF30, AF38 80 3.15" 90 90 3.54" 3.54" 5 0.20" 5.55.5 0.22" 0.22" 5 5 0.20" 0.20" 5 0.20" 5 5 0.20" 0.20" 80 80 3.15" 3.15" 5 5 0.20" 0.20" MS132-12 ... MS132-32 + BEA38-4, BER38-4, VEM4, CA4-10 + AF26, AF30, AF38 Note: contactor lateral distance to grounded component 2 mm 0.08" min. 5/14 | ABB 5 0.20" 5 0.20" 5.5 0.22" 5 5 0.20" 0.20" Ø 4.2 Ø 4.2 0.17" 0.17" M4M4 8-32UNC 8-32UNC Ø 4.2 0.17" M4 8-32UNC 90 3.54" 5 0.20" 10 10 0.39" 0.39" 17.5 0.69" 6 6 0.24" 0.24" 114114 4.49" 4.49" 6 0.24" 75 2.95" 81.3 3.20" 45 1.77" 80 3.15" 5 0.20" MS132-12 ... MS132-25 + BEA16-4, BER16-4, VEM4 + AF09, AF12, AF16 114 4.49" 198 7.80" 5 0.20" 75 75 2.95" 2.95" MS132-0.16 ... MS132-10 + BEA16-4, BER16-4, VEM4 + AF09, AF12, AF16 80 90 3.54" 3.15" 5 0.20" 3.8 0.15" 3.8 0.15" 90 3.54" 5 0.20" 5 0.20" Ø 4.2 0.17" M4 8-32UNC 1SBC101925S0201 45 1.77" 72.4 2.85" 6 0.24" Ø 4.5 0.18" M4 8-32UNC 75 75 2.95" 189.5 7.46" 17.5 0.69" 2.95" 6 0.24" 97 3.82" 97 3.82" 81.3 3.20" 186.8 7.35" Main dimensions N1 5 ABB | 5/15 DOL starters protected by moulded-case circuit-breakers and overload relays With AF contactors - Open type version in kit form Application Full voltage direct-on-line (DOL) starting for controlling three-phase asynchronous motors is a simple and economic solution characterised by a high starting torque (1.9 to 2.1 times full-speed torque) and a starting current 5.5 to 7 times nominal current. I/In C/Cn 7 6 I 5 I = current C = torque In = nominal current Cn = nominal torque 4 3 1SFC101191V0001 2 5 XT2S 160 + BEA140/XT2 + AF140-30-11 C 1 0 10 30 60 80 100 Coordination types The contactor and the moulded-case circuit-breaker control and protect motors against overload and shortcircuits according to coordination types 1 and 2 (IEC 60947-4-1/EN 60947-4-1) defining the anticipated level of service continuity as follow: Type 1: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will not be able to then operate without being repaired or having parts replaced. Type 2: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will be able to operate afterwards. The risk of contacts light welding is acceptable. Main Technical Data Standards IEC 60947-4-1 / EN 60947-4-1 Rated operational voltage Ue max. 400 V - 50/60 Hz Rated insulation voltage Ui acc. to IEC 60947-4-1 690 V acc. to UL / CSA 600 V ≤ 15 starts/hour - 80 % max. load factor - with max. 1.5 s starting time ≤ 30 starts/hour - 50 % max. load factor - with max. 1.5 s starting time Switching frequency Ambient air temperature 1SFC101190V0001 Close to the device < 55 °C IP20 Degree of protection Mounting positions XT2S 160 + BEA140/XT2 + AF140-30-11 + EF146 Pos. 2 +30° -30° Pos. 4 Pos. 3 Pos. 1 Pos. 1 ± 30° Pos. 5 Direct-on-line MCCB + AF 5/16 | ABB Direct-on-line MCCB + AF + OL 1SBC101973S0201 Pos. 1 DOL starters protected by moulded-case circuit-breakers and overload relays With AF contactors - Open type version in kit form Description MCCB Moulded-case circuit-breaker including motor protection You can easily assemble a direct-online starter by using the BEA connection bars. It is used to electrically connect MCCB moulded-case circuit-breaker and AF116 ... AF370 contactor, AC or DC operated. MCCB Moulded-case circuit-breaker (magnetic only) Select now easily and quickly your starter in the following pages for coordination type 1 or 2 at 400 V, 50 / 60 Hz, Iq = 50 kA up to 200 kW. AF116 ... AF370 Contactor BEA Connection bar 5 AF116 ... AF370 Contactor TF Thermal overload relay EF Electronic overload relay 1SBC101973S0201 BEA Connection bar For the full coordination tables: www.abb.com/lowvoltage then go to the right menu: "Support", select: "Online Product Selection Tools" then select "Coordination Tables for motor protection" ABB | 5/17 DOL starters protected by MCCB including motor protection Coordination type 1 or 2 Coordination type 1 or 2, AC-3, 50 kA, 400 V, 50/60 Hz MCCB + 5 Max. allowed thermal setting Base Type Order code 1440 116 XT2S 160 1SDA068164R1 + Ekip M-LIU In160 1SDA067355R1 132 1920 140 XT2S 160 1SDA068164R1 + Ekip M-LIU In160 1SDA067355R1 90 160 2400 190 T4S 250 PR222MP In200 1SDA054527R1 Included - 110 195 2880 205 T5S 400 PR222MP In320 1SDA054553R1 Included - 132 230 3600 265 T5S 400 PR222MP In400 1SDA054554R1 Included - 160 280 4400 305 T5S 400 PR222MP In400 1SDA054554R1 Included - IEC AC-3, 400 V Rated Rated power current kW A Magnetic triping current setting 55 97 75 5/18 | ABB Trip unit Type Order code A Connection bars Control voltage Uc min. ... Uc max. V 50/60 Hz V DC 24...60 20...60 Type Order code Type Order code AF116-30-11-11 1SFL427001R1111 BEA140/XT2 1SFN084206R1000 BEA205/T4 1SFN084806R1001 BEA370/T5 1SFN085406R1000 100...250 100...250 AF116-30-11-13 1SFL427001R1311 24...60 20...60 AF140-30-11-11 1SFL447001R1111 100...250 100...250 AF140-30-11-13 1SFL447001R1311 24...60 20...60 AF190-30-11-11 1SFL487002R1111 100...250 100...250 AF190-30-11-13 1SFL487002R1311 24...60 20...60 AF205-30-11-11 1SFL527002R1111 100...250 100...250 AF205-30-11-13 1SFL527002R1311 24...60 20...60 AF265-30-11-11 1SFL547002R1111 100...250 100...250 AF265-30-11-13 1SFL547002R1311 24...60 20...60 AF305-30-11-11 1SFL587002R1111 100...250 100...250 AF305-30-11-13 1SFL587002R1311 5 1SBC101975S0201 Contactors ABB | 5/19 DOL starters protected by MCCB (magnetic only) and overload relays Coordination type 1 or 2 Coordination type 1 or 2, AC-3, 50 kA, 400 V, 50/60 Hz MCCB Contactors Thermal overload relays 5 IEC AC-3, 400 V Rated Rated power current kW A Magnetic triping current 55 1600 75 90 110 97 132 160 195 Type Order code Control voltage Uc min. ... Uc max. V 50/60 Hz V DC XT2S 160 MA 160 1SDA076530R1 24...60 20...60 AF116-30-11-11 1SFL427001R1111 100...250 100...250 AF116-30-11-13 1SFL427001R1311 A 1920 2250 2720 XT2S 160 MA 160 XT4S 250 Ekip I In250 T4S 320 PR221-I In320 1SDA076530R1 1SDA068480R1 1SDA054126R1 Type Order code 24...60 20...60 AF140-30-11-11 1SFL447001R1111 100...250 100...250 AF140-30-11-13 1SFL447001R1311 24...60 20...60 AF190-30-11-11 1SFL487002R1111 100...250 100...250 AF190-30-11-13 1SFL487002R1311 24...60 20...60 AF205-30-11-11 1SFL527002R1111 100...250 100...250 AF205-30-11-13 1SFL527002R1311 Electronic overload relays 55 75 90 110 132 160 200 97 132 160 195 230 280 350 5/20 | ABB 1600 1920 2250 2720 3200 4000 5040 XT2S 160 MA 160 XT2S 160 MA 160 XT4S 250 Ekip I In250 T4S 320 PR221-I In320 T5S 400 PR221-I In400 T5S 400 PR221-I In400 T5S 630 PR221-I In630 1SDA076530R1 1SDA076530R1 1SDA068480R1 1SDA054126R1 1SDA054335R1 1SDA054335R1 1SDA054405R1 24...60 20...60 AF116-30-11-11 1SFL427001R1111 100...250 100...250 AF116-30-11-13 1SFL427001R1311 24...60 20...60 AF140-30-11-11 1SFL447001R1111 100...250 100...250 AF140-30-11-13 1SFL447001R1311 24...60 20...60 AF190-30-11-11 1SFL487002R1111 100...250 100...250 AF190-30-11-13 1SFL487002R1311 24...60 20...60 AF205-30-11-11 1SFL527002R1111 100...250 100...250 AF205-30-11-13 1SFL527002R1311 24...60 20...60 AF265-30-11-11 1SFL547002R1111 100...250 100...250 AF265-30-11-13 1SFL547002R1311 24...60 20...60 AF305-30-11-11 1SFL587002R1111 100...250 100...250 AF305-30-11-13 1SFL587002R1311 24...60 20...60 AF370-30-11-11 1SFL607002R1111 100...250 100...250 AF370-30-11-13 1SFL607002R1311 Overload relays Max. allowed Type setting current Order code Type Order code 5 A A 80...110 110 TF140DU-110 1SAZ431201R1002 110...142 140 TF140DU-142 1SAZ431201R1004 130...175 175 TA200DU-175 155...200 200 54...150 BEA140/XT2 1SFN084206R1000 1SAZ421201R1005 BEA205/XT4 1SFN084806R1000 TA200DU-200 1SAZ421201R1006 BEA205/T4 1SFN084806R1001 116 EF146-150 1SAX351001R1101 BEA140/XT2 1SFN084206R1000 54...150 140 EF146-150 1SAX351001R1101 63...210 190 EF205-210 1SAX531001R1101 BEA205/XT4 1SFN084806R1000 63...210 205 EF205-210 1SAX531001R1101 BEA205/T4 1SFN084806R1001 115...380 265 EF370-380 1SAX611001R1101 BEA370/T5 1SFN085406R1000 115...380 305 EF370-380 1SAX611001R1101 115...380 350 EF370-380 1SAX611001R1101 1SBC101974S0201 Setting ranges Connection bars ABB | 5/21 DOL starters protected by moulded-case circuit-breakers and overload relays With AF contactors - Open type version in kit form Direct-on-line starters K5 1 Q 5/L3 3/L2 1/L1 Protected by MCCB (magnetic only) and overload relays 5/L3 3/L2 1/L1 Protected by MCCB including motor protection Q1 T1/L1 1> 1> 1> ᶯ 0 1> 6/T3 T1/L2 1> M - L1U 4/T2 E kip 2/T1 5 Y01 13 M-1 E kip KM1 M - LR1U V M W 97 98 U 6/T3 4/T2 2/T1 TEST STOP V M W 1SBC101976S0201 U 6/T3 4/T2 2/T1 14 95 M KM1 96 A1 A RESET A2 14 13 A2 5/L3 3/L2 1/L1 A1 E kip 5/L3 m>3 3/L2 1/L1 1 >>> T1/L3 5/22 | ABB DOL starters protected by MCCB, including motor protection With AF contactors - Open type version in kit form Main dimensions mm, inches 30 1.18" 126 4.96" 8x M4 8-32 UNC 43.2 1.70" 289 11.38" 112 4.41" 90 3.54" 100 3.94" 5 XT2S 160 + Ekip M-LIU In160 + BEA140/XT2 + AF116, AF140, AF146 152 5.98" 35 1.39" 12 x M5 10-24 UNC 39.5 1.56" 1SFC101187C0201 165 6.50" 410 16.14" 176 6.93" 105 4.13" T4S + BEA205/T4 + AF190, AF205 ABB | 5/23 DOL starters protected by MCCB, including motor protection With AF contactors - Open type version in kit form Main dimensions mm, inches 180 7.09" 46.5 1.83" 8x M5 10-24 UNC 176 6.93" 140 5.51" 45 1.77" 187 7.36" 441 17.36" 5 43.75 1.72" 1SFC101188C0201 T5S + BEA370/T5 + AF265, AF305, AF370 5/24 | ABB DOL starters protected by MCCB (magnetic only) and thermal overload relays With AF contactors - Open type version in kit form Main dimensions mm, inches 126 4.96" 30 1.18" 8x M4 8-32 UNC 100 3.94" 5 45 1.77" 398 15.67" 43.2 1.70" 112 4.41" 90 3.54" 82.3 3.24" 4x M5 10-24 UNC 37 1.46" 50 1.97" 1SFC101189C0201 XT2S + BEA140/XT2 + AF116, AF140, AF146 + TF140 thermal overload relay ABB | 5/25 DOL starters protected by MCCB (magnetic only) and thermal overload relays With AF contactors - Open type version in kit form Main dimensions mm, inches 35 1.39" 152 5.98" 4x M4 8-32 UNC 139 5.47" 105 4.13" 165 6.50" 41 1.61" 8x M5 10-24 UNC 82 3.23" 25.5 1.0" 488 19.21" 5 37 1.46" 50 1.97" 1SFC101190C0201 XT4S + BEA205/XT4 + AF190, AF205 + TA200DU thermal overload relay 5/26 | ABB DOL starters protected by MCCB (magnetic only) and thermal overload relays With AF contactors - Open type version in kit form Main dimensions mm, inches 152 5.98" 35 1.39" 12 x M5 10-24 UNC 176 6.93" 105 4.13" 82 3.23" 25.5 1.0" 165 6.50" 527 20.75" 39.5 1.56" 5 37 1.46" 50 1.97" 1SFC101191C0201 T4S + BEA205/T4 + AF190, AF205 + TA200DU thermal overload relay ABB | 5/27 DOL starters protected by MCCB (magnetic only) and electronic overload relays With AF contactors - Open type version in kit form Main dimensions mm, inches 126 4.96" 30 1.18" 10 x M4 8-32 UNC 43.2 1.70" 112 4.41" 90 3.54" 100 3.94" 43.8 1.72" 408 16.06" 5 21.5 94.7 3.73" 0.85" 37 1.46" 2x M5 10-24 UNC 1SFC101192C0201 XT2S + BEA140/XT2 + AF116, AF140, AF146 + EF146 electronic overload relay 5/28 | ABB DOL starters protected by MCCB (magnetic only) and electronic overload relays With AF contactors - Open type version in kit form Main dimensions mm, inches 35 1.39" 152 5.98" 4x M4 8-32 UNC 112 4.42" 20.5 165 6.50" 1.61" 5 0.81" 517.5 20.37" 41 139 5.47" 105 4.13" 8x M5 10-24 UNC 1SFC101193C0201 XT4S + BEA205/XT4 + AF190, AF205 + EF205 electronic overload relay ABB | 5/29 DOL starters protected by MCCB (magnetic only) and electronic overload relays With AF contactors - Open type version in kit form Main dimensions mm, inches 152 5.98" 35 1.39" 12 x M5 10-24 UNC 176 6.93" 105 4.13" 20.5 112 4.42" 0.81" 165 6.50" 556.5 21.91" 39.5 1.56" 5 1SFC101194C0201 T4S + BEA205/T4 + AF190, AF205 + EF205 electronic overload relay 5/30 | ABB DOL starters protected by MCCB (magnetic only) and electronic overload relays With AF contactors - Open type version in kit form Main dimensions mm, inches 180 7.09" 46.5 1.83" 12 x M5 10-24 UNC 176 6.93" 140 5.51" 187 7.36" 112 4.41" 29 1.14" 600.5 23.64" 45 1.77" 5 35 1.38" 43.75 1.72" 1SFC101195C0201 T5S + BEA370/T5 + AF265, AF305, AF370 + EF370 electronic overload relay ABB | 5/31 DOL and reversing starters protected by overload relays With AF contactors - Open type version in kit form Application Full voltage direct-on-line and reversing starting for controlling three-phase asynchronous motors is a simple and economic solution characterised by a high starting torque (1.9 to 2.1 times full-speed torque) and a starting current 5.5 to 7 times nominal current. I/In C/Cn 7 1SBC100058V0014 6 I 5 I = current C = torque In = nominal current Cn = nominal torque 4 3 AF09-30-10 + TF42 2 C 1 5 0 10 30 60 80 100 Coordination Types 1SFC101153V0001 The contactor, the short-circuit protection device and the thermal overload relay control and protect motors against overload and short-circuits according to coordination types 1 and 2 (IEC 60947-4-1 / EN 60947-4-1) defining the anticipated level of service continuity as follow: Type 1: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will not be able to then operate without being repaired or having parts replaced. Type 2: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will be able to operate afterwards. The risk of contacts light welding is acceptable. AF140-30-11 + TF140DU Main Technical Data Standards IEC 60947-4-1 / EN 60947-4-1 Rated operational voltage Ue max. 690 V - 50/60 Hz Rated insulation voltage Ui acc. to IEC 60947-4-1 690 V acc. to UL / CSA 600 V Ambient air temperature 1SBC100059V0014 Close to the device ≤ 60 °C (TF42: 38 A above ≤ 50 °C) Degree of protection IP20 Switching frequency Refer to "Switching frequency diagrams" page AF09-30-10 + BER16-4 + VEM4 + TF42 AF140-30-11 + BER140-4 + VM19 + TF140DU 5/32 | ABB Pos. 1 Direct-on-line Pos. 1 Reversing 1SBC101920S0201 1SFC101152V0001 Mounting positions DOL and reversing starters protected by overload relays With AF contactors - Open type version in kit form Direct-On-Line starters Description Reversing starters for AF09 ... AF38 You can easily assemble a direct-on-line starter by connecting AF contactor and TF thermal overload relay or EF electronic overload relay. Fixing clip A2 AF09 ... AF96 Contactor AF09 ... AF38 Contactors A2 VM4 Mechanical interlock unit VE4 Electrical interlock block TF Thermal overload relay EF Electronic overload relay TF42 Thermal overload relay EF19, EF45 Electronic overload relay BER..-4 Connection set Reversing starters for AF116 ... AF370 BER..-4 Connection set You can also easily assemble reversing starter thanks to our complete range of accessories: –– For AF09 ... AF38, use VEM4 mechanical and electrical interlock set for reversing starter in 90 mm width. It includes: -- VM4 mechanical interlock unit including 2 fixing clips -- VE4 electrical interlock block with A2-A2 connection. –– For AF40 ... AF370, use VM mechanical interlock unit and additional auxiliary contact blocks for electrical interlocking. –– BER..-4 connection set: it assures a safe and simple reversing connection between both contactor main terminals. 5 Select now easily and quickly your starter in the following pages at 400 V, up to 200 kW. For the full coordination tables: www.abb.com/lowvoltage then go to the right menu: "Support", select: "Online Product Selection Tools" then select "Coordination Tables for motor protection" AF contactor with built-in cable clamps VM Mechanical interlock unit AF contactor with built-in cable clamps 1SBC101920S0201 BER..-4 Connection set TF/TA Thermal overload relay EF Electronic overload relay ABB | 5/33 Direct-On-Line starters protected by thermal overload relays With AF contactors - Open type version in kit form Contactors IEC AC-3, 400 V Rated Rated power current Control voltage Uc min. ... Uc max. kW A V 50/60 Hz V DC 4 8.5 24...60 20...60 AF09Z-30-10-21 1SBL136001R2110 100...250 100...250 AF09-30-10-13 24...60 20...60 AF12Z-30-10-21 1SBL156001R2110 100...250 100...250 AF12-30-10-13 24...60 20...60 AF16Z-30-10-21 1SBL176001R2110 100...250 100...250 AF16-30-10-13 24...60 20...60 AF26Z-30-00-21 1SBL236001R2100 100...250 100...250 AF26-30-00-13 24...60 20...60 AF30Z-30-00-21 1SBL276001R2100 100...250 100...250 AF30-30-00-13 24...60 20...60 AF38Z-30-00-21 1SBL296001R2100 100...250 100...250 AF38-30-00-13 1SBL297001R1300 24...60 20...60 AF40-30-00-11 1SBL347001R1100 100...250 100...250 AF40-30-00-13 1SBL347001R1300 24…60 20…60 AF52-30-00-11 1SBL367001R1100 100-250 100-250 AF52-30-00-13 1SBL367001R1300 24…60 20…60 AF65-30-00-11 1SBL387001R1100 100-250 100-250 AF65-30-00-13 1SBL387001R1300 24…60 20…60 AF80-30-00-11 1SBL397001R1100 100-250 100-250 AF80-30-00-13 1SBL397001R1300 24…60 20…60 AF96-30-00-11 1SBL407001R1100 100-250 100-250 AF96-30-00-13 1SBL407001R1300 24…60 20…60 AF116-30-11-11 1SFL427001R1111 100-250 100-250 AF116-30-11-13 1SFL427001R1311 24…60 20…60 AF140-30-11-11 1SFL447001R1111 100-250 100-250 AF140-30-11-13 1SFL447001R1311 24…60 20…60 AF190-30-11-11 1SFL487002R1111 100-250 100-250 AF190-30-11-13 1SFL487002R1311 24…60 20…60 AF205-30-11-11 1SFL527002R1111 100-250 100-250 AF205-30-11-13 1SFL527002R1311 5.5 7.5 11 15 18.5 18.5 22 30 37 45 55 75 90 110 11.5 15.5 22 29 35 35 41 55 66 80 97 132 160 195 Type Order code Setting ranges Type Order code 7.60...10.0 TF42-10 1SAZ721201R1043 10.0...13.0 TF42-13 1SAZ721201R1045 13.0...16.0 TF42-16 1SAZ721201R1047 20.0...24.0 TF42-24 1SAZ721201R1051 29.0...35.0 TF42-35 1SAZ721201R1053 35.0...38.0/40.0 TF42-38 1SAZ721201R1055 30.0...40.0 TF65-40 1SAZ811201R1003 36.00…47.0 TF65-47 1SAZ811201R1004 50.0…60.0 TF65-60 1SAZ811201R1006 57.0…68.0 TF96-68 1SAZ911201R1003 75.0..87.0 TF96-87 1SAZ911201R1005 80…110 TF140DU-110 1SAZ431201R1002 100…135 TF140DU-135 1SAZ431201R1003 130…175 TA200DU-175 1SAZ421201R1005 150…200 TA200DU-200 1SAZ421201R1006 Accessories (1) A 1SBL137001R1310 1SBL157001R1310 1SBL177001R1310 1SBL237001R1300 1SBL277001R1300 (1) For other control voltages, see "Voltage code table". Note : for rated power above 110 kW, refer to "Starters protected by electronic overload relays". 1SBC101921S0201 5 Thermal overload relays 5/34 | ABB Reversing starters protected by thermal overload relays With AF contactors - Open type version in kit form Contactors Thermal overload relays Accessories + BER..-4 VEM4 IEC AC-3, 400 V Rated Rated power current kW A Control voltage Uc min. ... Uc max. 4 24...60 20...60 AF09Z-30-10-21 1SBL136001R2110 100...250 100...250 AF09-30-10-13 24...60 20...60 AF12Z-30-10-21 1SBL156001R2110 100...250 100...250 AF12-30-10-13 24...60 20...60 AF16Z-30-10-21 1SBL176001R2110 100...250 100...250 AF16-30-10-13 24...60 20...60 AF26Z-30-00-21 1SBL236001R2100 100...250 100...250 AF26-30-00-13 24...60 20...60 AF30Z-30-00-21 1SBL276001R2100 100...250 100...250 AF30-30-00-13 24...60 20...60 AF38Z-30-00-21 1SBL296001R2100 100...250 100...250 AF38-30-00-13 1SBL297001R1300 24...60 20...60 AF40-30-00-11 1SBL347001R1100 100...250 100...250 AF40-30-00-13 1SBL347001R1300 24...60 20...60 AF52-30-00-11 1SBL367001R1100 100...250 100...250 AF52-30-00-13 1SBL367001R1300 24...60 20...60 AF65-30-00-11 1SBL387001R1100 100...250 100...250 AF65-30-00-13 1SBL387001R1300 24...60 20...60 AF80-30-00-11 1SBL397001R1100 100...250 100...250 AF80-30-00-13 1SBL397001R1300 24...60 20...60 AF96-30-00-11 1SBL407001R1100 100...250 100...250 AF96-30-00-13 1SBL407001R1300 24...60 20...60 AF116-30-11-11 1SFL427001R1111 100...250 100...250 AF116-30-11-13 1SFL427001R1311 24...60 20...60 AF140-30-11-11 1SFL447001R1111 100...250 100...250 AF140-30-11-13 1SFL447001R1311 24...60 20...60 AF190-30-11-11 1SFL487002R1111 100...250 100...250 AF190-30-11-13 1SFL487002R1311 24...60 20...60 AF205-30-11-11 1SFL527002R1111 100...250 100...250 AF205-30-11-13 1SFL527002R1311 5.5 7.5 11 15 18.5 18.5 22 30 37 45 55 75 90 110 8.5 11.5 15.5 22 29 35 35 41 55 66 80 97 132 160 195 Type Order code Setting ranges Type Order code TF42-10 1SAZ721201R1043 Type CA4-10 Order code (1) V 50/60 Hz V DC A 7.60...10.0 BER16-4 VEM4 1SBN081311R1000 1SBN030111R1000 BER38-4 + VEM4 + 2x CA4-10 1SBN082311R1000 1SBN030111R1000 1SBN010110R1010 BER65-4 + VM96-4 + 2x CA4-10 + 2x CA4-01 1SBN083411R1000 1SBN033405T1000 1SBN010110R1010 1SBN010110R1001 BER96-4 + VM96-4 + 2x CA4-10 + 2x CA4-01 1SBN083911R1000 1SBN033405T1000 1SBN010110R1010 1SBN010110R1001 + 1SBL137001R1310 10.0...13.0 TF42-13 1SAZ721201R1045 13.0...16.0 TF42-16 1SAZ721201R1047 20.0...24.0 TF42-24 1SAZ721201R1051 29.0...35.0 TF42-35 1SAZ721201R1053 35.0...38.0/40.0 TF42-38 1SAZ721201R1055 30.0...40.0 TF65-40 1SAZ811201R1003 36.00…47.0 TF65-47 1SAZ811201R1004 50.0…60.0 TF65-60 1SAZ811201R1006 57.0…68.0 TF96-68 1SAZ911201R1003 75.0..87.0 TF96-87 1SAZ911201R1005 80…110 TF140DU-110 1SAZ431201R1002 5 1SBL157001R1310 1SBL177001R1310 1SBL237001R1300 1SBL277001R1300 100…135 TF140DU-135 1SAZ431201R1003 130…175 TA200DU-175 1SAZ421201R1005 150…200 TA200DU-200 + BER140-4 1SFN084211R1000 VM19 1SFN030300R1000 + BER205-4 1SFN084811R1000 VM19 1SFN030300R1000 1SAZ421201R1006 1SBC101922S0201 (1) For other control voltages, see "Voltage code table". Note : for rated power above 110 kW, refer to "Starters protected by electronic overload relays". ABB | 5/35 Direct-On-Line starters protected by electronic overload relays With AF contactors - Open type version in kit form Contactors IEC AC-3, 400 V Rated Rated power current Control voltage Uc min. ... Uc max. kW A V 50/60 Hz V DC 4 8.5 24...60 20...60 AF09Z-30-10-21 1SBL136001R2110 100...250 100...250 AF09-30-10-13 24...60 20...60 AF12Z-30-10-21 1SBL156001R2110 100...250 100...250 AF12-30-10-13 24...60 20...60 AF16Z-30-10-21 1SBL176001R2110 100...250 100...250 AF16-30-10-13 24...60 20...60 AF26Z-30-00-21 1SBL236001R2100 100...250 100...250 AF26-30-00-13 24...60 20...60 AF30Z-30-00-21 1SBL276001R2100 100...250 100...250 AF30-30-00-13 24...60 20...60 AF38Z-30-00-21 1SBL296001R2100 100...250 100...250 AF38-30-00-13 1SBL297001R1300 24...60 20...60 AF40-30-00-11 1SBL347001R1100 100...250 100...250 AF40-30-00-13 1SBL347001R1300 24…60 20…60 AF52-30-00-11 1SBL367001R1100 100-250 100-250 AF52-30-00-13 1SBL367001R1300 24…60 20…60 AF65-30-00-11 1SBL387001R1100 100-250 100-250 AF65-30-00-13 1SBL387001R1300 24…60 20…60 AF80-30-00-11 1SBL397001R1100 100-250 100-250 AF80-30-00-13 1SBL397001R1300 24…60 20…60 AF96-30-00-11 1SBL407001R1100 100-250 100-250 AF96-30-00-13 1SBL407001R1300 24…60 20…60 AF116-30-11-11 1SFL427001R1111 100-250 100-250 AF116-30-11-13 1SFL427001R1311 24…60 20…60 AF140-30-11-11 1SFL447001R1111 100-250 100-250 AF140-30-11-13 1SFL447001R1311 24…60 20…60 AF190-30-11-11 1SFL487002R1111 100-250 100-250 AF190-30-11-13 1SFL487002R1311 24…60 20…60 AF205-30-11-11 1SFL527002R1111 100-250 100-250 AF205-30-11-13 1SFL527002R1311 24…60 20…60 AF265-30-11-11 1SFL547002R1111 100-250 100-250 AF265-30-11-13 1SFL547002R1311 24…60 20…60 AF305-30-11-11 1SFL587002R1111 100-250 100-250 AF305-30-11-13 1SFL587002R1311 24…60 20…60 AF370-30-11-11 1SFL607002R1111 100-250 100-250 AF370-30-11-13 1SFL607002R1311 5.5 7.5 11 15 18.5 18.5 22 30 37 45 55 75 90 110 132 160 200 11.5 15.5 22 29 35 35 41 55 66 80 97 132 160 195 230 280 350 Type Order code Setting ranges Type Order code 5.70…18.9 EF19-18.9 1SAX121001R1105 5.70…18.9 EF19-18.9 1SAX121001R1105 5.70…18.9 EF19-18.9 1SAX121001R1105 9.00…30.0 EF45-30 1SAX221001R1101 9.00…30.0 EF45-30 1SAX221001R1101 15.0…45.0 EF45-45 1SAX221001R1102 25.0...70.0 EF65-70 1SAX331001R1101 25.0…70.0 EF65-70 1SAX331001R1101 25.0…70.0 EF65-70 1SAX331001R1101 36…100 EF96-100 1SAX341001R1101 36…100 EF96-100 1SAX341001R1101 54…150 EF146-150 1SAX351001R1101 54…150 EF146-150 1SAX351001R1101 63…210 EF205-210 1SAX531001R1101 63…210 EF205-210 1SAX531001R1101 115…380 EF370-380 1SAX611001R1101 115…380 EF370-380 1SAX611001R1101 115…380 EF370-380 1SAX611001R1101 Accessories (1) A 1SBL137001R1310 1SBL157001R1310 1SBL177001R1310 1SBL237001R1300 1SBL277001R1300 (1) For other control voltages, see "Voltage code table". 1SBC101948S0201 5 Electronic overload relays 5/36 | ABB Reversing starters protected by electronic overload relays With AF contactors - Open type version in kit form Contactors Electronic overload relays Accessories + BER..-4 VEM4 IEC AC-3, 400 V Rated Rated power current kW A Control voltage Uc min. ... Uc max. 4 24...60 20...60 AF09Z-30-10-21 1SBL136001R2110 100...250 100...250 AF09-30-10-13 24...60 20...60 AF12Z-30-10-21 1SBL156001R2110 100...250 100...250 AF12-30-10-13 24...60 20...60 AF16Z-30-10-21 1SBL176001R2110 100...250 100...250 AF16-30-10-13 24...60 20...60 AF26Z-30-00-21 1SBL236001R2100 100...250 100...250 AF26-30-00-13 24...60 20...60 AF30Z-30-00-21 1SBL276001R2100 100...250 100...250 AF30-30-00-13 24...60 20...60 AF38Z-30-00-21 1SBL296001R2100 100...250 100...250 AF38-30-00-13 1SBL297001R1300 24...60 20...60 AF40-30-00-11 1SBL347001R1100 100...250 100...250 AF40-30-00-13 1SBL347001R1300 24...60 20...60 AF52-30-00-11 1SBL367001R1100 100...250 100...250 AF52-30-00-13 1SBL367001R1300 24...60 20...60 AF65-30-00-11 1SBL387001R1100 100...250 100...250 AF65-30-00-13 1SBL387001R1300 24...60 20...60 AF80-30-00-11 1SBL397001R1100 100...250 100...250 AF80-30-00-13 1SBL397001R1300 24...60 20...60 AF96-30-00-11 1SBL407001R1100 100...250 100...250 AF96-30-00-13 1SBL407001R1300 24...60 20...60 AF116-30-11-11 1SFL427001R1111 100...250 100...250 AF116-30-11-13 1SFL427001R1311 24...60 20...60 AF140-30-11-11 1SFL447001R1111 100...250 100...250 AF140-30-11-13 1SFL447001R1311 24...60 20...60 AF190-30-11-11 1SFL487002R1111 100...250 100...250 AF190-30-11-13 1SFL487002R1311 24...60 20...60 AF205-30-11-11 1SFL527002R1111 100...250 100...250 AF205-30-11-13 1SFL527002R1311 24...60 20...60 AF265-30-11-11 1SFL547002R1111 100...250 100...250 AF265-30-11-13 1SFL547002R1311 24...60 20...60 AF305-30-11-11 1SFL587002R1111 100...250 100...250 AF305-30-11-13 1SFL587002R1311 24...60 20...60 AF370-30-11-11 1SFL607002R1111 100...250 100...250 AF370-30-11-13 1SFL607002R1311 5.5 7.5 11 15 18.5 18.5 22 30 37 45 55 75 90 110 132 160 200 8.5 11.5 15.5 22 29 35 35 41 55 66 80 97 132 160 195 230 280 350 Type Order code Setting ranges Type Order code EF19-18.9 1SAX121001R1105 Type CA4-10 Order code (1) V 50/60 Hz V DC A 5.70…18.9 BER16-4 VEM4 1SBN081311R1000 1SBN030111R1000 BER38-4 + VEM4 + 2x CA4-10 1SBN082311R1000 1SBN030111R1000 1SBN010110R1010 BER65-4 + VM96-4 + 2x CA4-10 + 2x CA4-01 1SBN083411R1000 1SBN033405T1000 1SBN010110R1010 1SBN010110R1001 BER96-4 + VM96-4 + 2x CA4-10 + 2x CA4-01 1SBN083911R1000 1SBN033405T1000 1SBN010110R1010 1SBN010110R1001 + 1SBL137001R1310 5.70…18.9 EF19-18.9 1SAX121001R1105 5.70…18.9 EF19-18.9 1SAX121001R1105 9.00…30.0 EF45-30 1SAX221001R1101 9.00…30.0 EF45-30 1SAX221001R1101 15.0…45.0 EF45-45 1SAX221001R1102 25.0...70.0 EF65-70 1SAX331001R1101 25.0…70.0 EF65-70 1SAX331001R1101 25.0…70.0 EF65-70 1SAX331001R1101 36…100 EF96-100 1SAX341001R1101 36…100 EF96-100 1SAX341001R1101 54…150 EF146-150 1SAX351001R1101 5 1SBL157001R1310 1SBL177001R1310 1SBL237001R1300 1SBL277001R1300 54…150 EF146-150 1SAX351001R1101 63…210 EF205-210 1SAX531001R1101 63…210 EF205-210 1SAX531001R1101 115…380 EF370-380 1SAX611001R1101 115…380 EF370-380 1SAX611001R1101 115…380 EF370-380 1SAX611001R1101 + BER140-4 1SFN084211R1000 VM19 1SFN030300R1000 + BER205-4 1SFN084811R1000 VM19 1SFN030300R1000 + BER370-4 1SFN085411R1000 VM19 1SFN030300R1000 1SBC101949S0201 (1) For other control voltages, see "Voltage code table". ABB | 5/37 DOL and reversing starters protected by overload relays With AF contactors - Open type version in kit form Switching frequency diagrams General Overload relays cannot be operated at any arbitrary switching frequency in order to avoid tripping. Applications involving up to 15 operations per hour are acceptable. Higher switching frequencies are permitted if the duty ratio and the motor starting time are allowed for and if the motor's making current does not appreciably exceed 6 times the rated operating current. Please refer to the adjacent diagram for guideline values for the permitted switching frequency. Thermal overload relay 140 Example: 120 Starting time of the motor: 1 second - Duty ratio: 40 % means a permitted switching frequency of max. 60 operating cycles per hour. 100 ta = 0.5 80 s ta 20 ta = =1 s ta = 1 ta 40 = 60 .5 3s s 5s 0 0 20 40 60 80 100 Duty ratio (%) ta: motor starting time Electronic overload relay Intermittent periodic duty =0 .5 s 140 120 100 ta = 80 60 ta = 1 .5 s 40 0 20 ta 70 60 80 100 Duty ratio (%) s 50 40 ta = 30 0 4s ta = 6 s ta = 8 s t a = 10 s t a = 12 s 10 40 =2 60 20 ta = 3 s ta = 5 s 20 0 1s 80 Trip class 30E Switching frequency (ops/h) ta 160 Trip class 20E Switching frequency (ops/h) Trip class 10E Switching frequency (ops/h) 0 20 40 50 ta 45 30 25 ta = 20 15 100 Duty ratio (%) 0 10 s ta = 1 5s t a = 20 s t a = 25 s 5 80 s 35 10 60 =5 40 0 20 40 60 80 100 Duty ratio (%) ta: motor starting time Exemple for trip class 10E: Starting time of the motor: 1 second. Duty ratio: 60 % means a permitted switching frequency of max. 60 operating cycles per hour, for a motor breaking current not exceeding 6 x In. 1SBC101954S0201 5 Switching frequency (ops/h) Intermittent periodic duty 5/38 | ABB DOL and reversing starters protected by overload relays With AF contactors - Open type version in kit form Wiring diagrams Direct-on-line starters AC or DC remote control KM1:5/L3 Us KM1:5/L3 Us 96 FR1 A M STOP O 13 KM1 14 97 I M M 5 KM1 Us N KM1:3/L2 KM1:3/L2 ~ ~ A1 14 V KM1 Us N A2 4/T2 U KM1 A1 2/T1 W V 6/T3 6/T3 U 4/T2 2/T1 98 96 TEST STOP I FR1 FR1 A2 M 13 A 95 RESET FR1 14 6/T3 4/T2 2/T1 14 6/T3 4/T2 2/T1 RESET 95 A M 96 13 RESET 95 5/L3 3/L2 1/L1 5/L3 13 A1 AC or DC local control STOP A2 KM1 3/L2 1-phase 1/L1 Power circuit Note: coil Uc 12-20 V DC : A1+, A2- Reversing starters AC or DC local control 3/L2 5/L3 4/T2 6/T3 A M STOP FR1 .4 21 A2 22 KM1 KM1 A1 A1 A2 A2 KM2 (3) KM1:3/L2 AC or DC remote control RESET A 95 KM1:5/L3 Us M 96 STOP FR1 O .3 II .3 KM1 KM2 .4 I A2 (1) KM2 A2 KM1 21 KM1 A1 A1 A2 A2 KM2 1SBC101926S0201 KM1:3/L2 KM1 KM2 22 Us N (2) 21 With VEM4 With VM 01 01 (2) 22 ~ A2 KM2 (1) .4 M KM1 KM2 (2) 22 Us N U VW 01 01 (2) 6/T3 4/T2 2/T1 98 96 With VEM4 21 With VM FR1 TEST STOP KM2 II 97 95 A M .4 KM1 I RESET .3 .3 6/T3 4/T2 2/T1 A2 96 1/L1 2/T1 RESET A1 5/L3 3/L2 KM2 A2 KM1 A1 1/L1 KM1:5/L3 Us 95 Power circuit (3) Note: - VEM4 = VM4 (1) + VE4 (2) with A2-A2 (3) connection (Except for coil Uc 12-20 V DC : use VM4 with CA4). - coil Uc 12-20 V DC : A1+, A2- ABB | 5/39 DOL starters protected by thermal overload relays With AF contactors - open type version in kit form mm, inches 5 0.20" 35 101.38" ø0.39" 4.2 0.17" 80 3.15" 10 0.39" 5.5 0.22" 35 1.38" 2x ø 4.2 0.17" M4 8-32 UNC 2x M4 8-32 UNC 70 2.76" 5.5 0.22" 5.5 0.22" 5 0.20" 9.2 0.36" 6.2 0.24" 5 0.20" 5.5 0.22" 70 2.76" 86 3.39" 80 3.15" 60 2.36" 45 1.77" 5 0.20" 70 2.76" 5.5 0.22" 45 1.77" 35 mm EN/IEC 60715 ø 4.2 0.17" 2x M4 8-32 UNC 158.9 6.26" 35 1.38" 5 0.20" 158.9 6.26" 156.1 6.15" 35 mm EN/IEC 60715 5.5 0.22" 86 3.39" 10 0.39" 60 2.36" 71 2.80" 60 2.36" 77 3.03" 45 1.77" 35 mm EN/IEC 60715 Main dimensions 5 0.20" 9.2 0.36" 5 72.7 2.86" 75.7 2.98" 75.7 2.98" 76.8 3.02" 79.8 3.14" 79.8 3.14" AF09, AF12, AF16 + TF42 thermal overload relay AF26, AF30, AF38 + TF42 thermal overload relay Note: contactor lateral distance to grounded component 2 mm 0.08" min. 111 4.37" 55 2.17" 10 0.39" 116 4.57" 70 2.76" 35 x 15 mm EN/IEC 60715 5.5 0.22" 106.8 4.20" 106.8 4.20" AF80, AF96 + TF96 thermal overload relay 60 2.36" 2x M6 ¼-20 UNC ø 6.4 0.25" 2x M6 ¼-20 UNC 5 0.20" AF80, AF96 + TF96 thermal overload relay 1SBC101927S0201 4.6 0.18" 110 4.33" 4.6 0.18" 5 0.20" AF40, AF52, AF65 + TF65 thermal overload relay 5/40 | ABB 110.9 4.37" 2x M4 8-32 UNC 100 3.94" 110 4.33" ø 4.2 0.17" 110.6 4.35" 100 3.94" 45 1.77" ø 6.4 0.25" 5.5 0.22" 4 0.16" 4 0.16" AF40, AF52, AF65 + TF65 thermal overload relay 10 0.39" 7 0.28" 211 8.31" 208.5 8.21" 35 mm EN/IEC 60715 7 0.28" DOL starters protected by thermal overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 126 4.96" 17 0.67" 30 1.18" 3 0.12" 4x M4 8-32 UNC 45 1.77" 259 10.20" 100 3.94" 90 3.54" 5 82.3 3.24" 6 0.24" 4x M5 10-24 UNC 37 1.46" 8 0.31" 50 1.97" AF116, AF140-30-11(B) + TF140 thermal overload relay AF116, AF140-30-11(B) + TF140 thermal overload relay 152 5.98" 105 4.13" 35.5 1.40" 5 0.20" 8x M5 10-24 UNC 11 0.43" 21 0.83" 82 3.23" 25.5 1.0" 312.5 12.3" 165 6.50" 35 1.39" 20 0.79" 42.5 1.67" AF190, AF205-30-11 + TA200DU thermal overload relay 62 2.44" 4 0.16" 1SFC101156C0201 37 1.46" ø 11 0.43" 50 1.97" 126 4.96" AF190, AF205 + TA200DU thermal overload relay ABB | 5/41 Reversing starters protected by thermal overload relays With AF contactors - open type version in kit form mm, inches 102.5 4.04" 119.5 4.70" 90 3.54" 71 2.80" 70 2.76" 60 2.36" 5.5 0.22" 2x M4 8-32 UNC 80 3.15" ø 4.2 0.17" 6.2 0.24" 5 0.20" 10 0.39" 170 6.69" 166.5 6.56" 35 mm EN/IEC 60715 5.5 0.22" 80 3.15" 5.5 0.22" 35 mm EN/IEC 60715 90 3.54" 5.5 0.22" 80 10 0.39" 60 2.36" Main dimensions ø 4.2 0.17 5 0.20" 9.2 0.36" 5 72.7 2.86" 75.7 2.98" 76.8 3.02" AF09, AF12, AF16 + BER16-4, VEM4 + TF42 thermal overload relay 2x M4 8-32 UNC 60 2.36" 70 2.76" 80 3.15" ø 4.2 0.17" 79.8 3.14" 5 0.20" 10 0.39" AF26, AF30, AF38 + BER38-4, VEM4, CA4-10 + TF42 thermal overload relay 5 0.20" AF09, AF12, AF16, AF26, AF30, AF38 1SBC101928S0201 Note: contactor lateral distance to grounded component 2 mm 0.08" min. 5/42 | ABB Reversing starters protected by thermal overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 144 5.67" 111 4.37" 110 4.33" 10 M6 ¼-20 UNC 100 3.94" 0.39" 4.6 0.18" 5.5 0.22" 100 3.94" 110 4.33" 35 x 15 mm EN/IEC 60715 223 8.78" M4 8-32 UNC ø 4.2 0.17" ø 6.4 0.25" 4 0.16" 5 5 0.20" AF40, AF52, AF65 + BER65-4, VM96-4 + TF65 thermal overload relay 106.8 4.20" 110.6 4.35" AF40, AF52, AF65 + BER65-4, VM96-4 + TF65 thermal overload relay 149 5.87" 140 5.51" 116 4.57" M6 ¼-20 UNC 130 5.12" 10 4.6 0.18" 5.5 0.22" 100 3.94" 110 4.33" 35 x 15 mm EN/IEC 60715 226 8.90" 0.39" ø 6.4 0.25" 4 0.16" 5 0.20" AF80, AF96 + BER96-4, VM96-4 + TF96 thermal overload relay 106.8 4.20" 110.9 4.37" 1SBC101929S0201 AF80, AF96 + BER96-4, VM96-4 + TF96 thermal overload relay ABB | 5/43 Reversing starters protected by thermal overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 180 7.09" 126 4.96" 8x 60 2.36" 30 1.18" M4 8-32 UNC 272 10.71" 100 3.94" 30 1.18" 82.3 3.24" 45 1.77" 5 4x M5 10-24 UNC 37 1.46" 50 1.97" 1SFC101158C0201 AF116, AF140, AF146 + BER140-4, VM19 + TF140 thermal overload relay 5/44 | ABB Reversing starters protected by thermal overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 210 8.27" 152 5.98" 395 15.55" 5 35 35 12 X M5 10-24 UNC 1.38" 1SFC101159C0201 82 3.23" 81.5 3.21" 165 6.50" 1.38" 70 2.76" 37 1.46" 50 1.97" AF190, AF205 + BER205-4, VM19 + TA200DU thermal overload relay ABB | 5/45 DOL starters protected by electronic overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 86 3.39" 77 3.03" 71 2.80" 45 1.77" 45 1.77" 10 0.39" 80 3.15" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 5.5 0.22" 155.2 6.11" 152.4 6.00" 10 0.39" 5.5 0.22" 5.5 0.22" 5.5 0.22" 17.4 0.69" 20.4 0.80" 5 73.3 2.89" 76.3 3.00" 76.8 3.02" 79.8 3.14" AF26, AF30, AF38 + EF19 electronic overload relay AF09, AF12, AF16 + EF19 electronic overload relay 35 1.38" 10 0.39" 5.5 0.22" ø 4.2 0.17" 2x M4 8-32 UNC 70 2.76" 80 3.15" 10 0.39" 5 0.20" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 158.9 6.26" 5.5 0.22" 5.5 0.22" 60 2.36" 80 3.15" 5.5 0.22" 172.3 6.78" 86 3.39" 86 3.39" 45 1.77" 45 1.77" 5 0.20" AF09, AF12, AF16, AF26, AF30, AF38 + EF electronic overload relay 9.2 0.36" 75.7 2.98" 79.8 3.14" 82.5 3.25" 86 3.39" AF26, AF30, AF38 + EF45 electronic overload relay 1SBC101950S0201 Note: contactor lateral distance to grounded component 2 mm 0.08" min. 5/46 | ABB DOL starters protected by electronic overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 111 4.37" 55 2.17" 10 0.39" 116 4.57" 70 2.76" 35 x 15 mm EN/IEC 60715 5.5 0.22" 237 9.33" 35 mm EN/IEC 60715 237 9.33" 10 0.39" 7 0.28" 7 0.28" 5.5 0.22" 5.4 0.21" 5.4 0.21" 5 106.8 4.20" 110.6 4.35" 70 2.76" 106.8 4.20" 110.6 4.35" AF40, AF52, AF65 + EF65 electronic overload relay ø 6.4 0.25" 2x M6 ¼-20 UNC 4.6 0.18" 4.6 0.18" 110 4.33" 2x M4 8-32 UNC 5 0.20" AF40, AF52, AF65 + EF65 electronic overload relay 5 0.20" AF80, AF96 + EF96 electronic overload relay 1SBC101951S0201 100 3.94" 110 4.33" ø 4.2 0.17" 60 2.36" 2x M6 ¼-20 UNC 100 3.94" 45 1.77" ø 6.4 0.25" AF80, AF96 + EF96 electronic overload relay ABB | 5/47 DOL starters protected by electronic overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 126 4.96" 17 0.67" 30 1.18" 3 0.12" 6x M4 8-32 UNC 46 1.81" 21.5 94.7 3.73" 0.85" 105 4.13" 37 1.46" 2x M5 10-24 UNC AF116, AF140, AF146-30-11(B) + EF146 electronic overload relay AF116, AF140, AF146-30-11(B) + EF146 electronic overload relay 152 5.98" 105 4.13" 8x M5 10-24 UNC 5 0.20" 20.5 10 0.39" 112 4.42" 0.81" 165 6.50" 35.5 1.40" 342 13.46" 17.5 0.69" 35 1.38" 35 1.38" 8.5 0.33" AF190, AF205-30-11 + EF205 electronic overload relay 5/48 | ABB 35 1.39" 5 0.20" 123 4.84" AF190, AF205 + EF205 electronic overload relay 1SFC101161C0201 35 1.38" 5 270 10.63" 100 3.94" 90 3.54" DOL starters protected by electronic overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 180 7.09" 35.5 1.40" 8x M5 10-24 UNC 5 0.20" 187 7.36" 140 5.51" ø 11 0.43" 44 1.73" 20 1.79" 43.8 1.72" 14 0.55" 112 4.41" 29 1.14" 385 15.16" 5 35 1.38" 43.75 1.72" 35 1.20" 5 0.20" 123 4.84" 1SFC101157C0201 AF265, AF305, AF370-30-11 + EF370 electronic overload relay ABB | 5/49 Reversing starters protected by electronic overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 102.5 4.04" 119.5 4.70" 90 3.54" 71 2.80" 10 0.39" 5.5 0.22" 5.5 0.22" 5.5 0.22" 166 6.54" 163 6.42" 35 mm EN/IEC 60715 80 3.15" 35 mm EN/IEC 60715 90 3.54" 10 0.39" 5.5 0.22" 20.4 0.80" 17.4 0.69" 5 73.3 2.89" 76.3 3.00" 76.8 3.02" 79.8 3.14" AF09, AF12, AF16 + BER16-4, VEM4 + EF19 electronic overload relay AF26, AF30, AF38 + BER38-4, VEM4, CA4-10 + EF19 electronic overload relay 119.5 4.70" 102.5 4.04" 90 3.54" 80 3.15" 71 2.80" 5.5 0.22" ø 4.2 0.17" 6.2 0.24" 2x M4 8-32 UNC 80 3.15" 70 2.76" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 166.5 6.56" 183.5 7.22" 5.5 0.22" 10 0.39" 5 0.20" 10 5.5 0.22" 0.39" 5.5 0.22" 60 2.36" 90 3.54" 5 0.20" AF09, AF12, AF16, AF26, AF30, AF38 72.7 2.86" 76.8 3.02" 82.5 3.25" 86 3.39" AF26, AF30, AF38 + BER38-4, VEM4, CA4-10 + EF45 electronic overload relay 1SBC101952S0201 Note: contactor lateral distance to grounded component 2 mm 0.08" min. 5/50 | ABB Reversing starters protected by electronic overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 144 5.67" 111 4.37" 117.5 4.63" 10 M6 ¼-20 UNC 100 3.94" 0.39" 100 3.94" 110 4.33" 5.5 0.22" 4.6 0.18" 251 9.88" 35 x 15 mm EN/IEC 60715 M4 8-32 UNC ø 4.2 0.17" 5.4 0.21" ø 6.4 0.25" 5 5 0.20" AF40, AF52, AF65 + BER65-4, VM96-4 + EF65 electronic overload relay 106.8 4.20" 110.6 4.35" AF40, AF52, AF65 + BER65-4, VM96-4 + EF65 electronic overload relay 149 5.87" 140 5.51" 116 4.57" M6 ¼-20 UNC 130 5.12" 10 4.6 0.18" 5.5 0.22" 100 3.94" 110 4.33" 35 x 15 mm EN/IEC 60715 251 9.88" 0.39" 5.4 0.21" ø 6.4 0.25" 5 0.20" AF80, AF96 + BER96-4, VM96-4 + EF96 electronic overload relay 106.8 4.20" 110.6 4.35" 1SBC101953S0201 AF80, AF96 + BER96-4, VM96-4 + EF96 electronic overload relay ABB | 5/51 Reversing starters protected by electronic overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 180 7.09" 126 4.96" 60 2.36" 30 1.18" 10x M4 8-32 UNC 5 43.8 1.72" 281.5 11.08" 100 3.94" 30 1.18" 21.5 94.7 3.73" 0.85" 2x M5 10-24 UNC 37 1.46" 1SFC101162C0201 AF116, AF140, AF146 + BER140-4, VM19 + EF146 electronic overload relay 5/52 | ABB Reversing starters protected by electronic overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 210 8.27" 152 5.98" 425 16.73" 5 35 70 2.76" 35 12 X M5 10-24 UNC 1.38" 1SFC101163C0201 112 4.42" 76 2.99" 165 6.50" 1.38" AF190, AF205 + BER205-4, VM19 + EF205 electronic overload relay ABB | 5/53 Reversing starters protected by electronic overload relays With AF contactors - open type version in kit form Main dimensions mm, inches 280 11.02" 180 7.09" 477.5 18.80" 5 43.75 96.25 3.79" 12 X M5 10-24 UNC 1.72" AF265, AF305, AF370 + BER370-4, VM19 + EF370 electronic overload relay 5/54 | ABB 35 1.38" 1SFC101160C0201 112 4.41" 90.5 3.56" 187 7.36" 1.72" 43.75 Notes N2 5 ABB | 5/55 Star-delta starters protected by overload relays With AF contactors - Open type version in kit form Application L Δ Star-delta starting is the most common method to reduce the starting current of a motor. Y This system can be used on all the squirrel cage motors, which are normally used in delta connection. In this type of starting, it is recommended to choose motors having high starting torque i.e. much higher than the resistive torque in order to reach sufficient high speed when the motor is connected in star. When starting: I/In T/T n 7 1SFC101103V0001 6 5 –– Inrush current is reduced to a third of direct starting current –– Motor torque is reduced to a third or even less of direct starting torque. I (delta) 5 Transient current is generated when switching from star to delta connection. 4 During the initial starting phase ("star" connection), the resistive torque of the driven load must remain, irrespective of speed, less than the "star" motor torque until "star-delta" switching occurs. 3 T∆ (motor) I (star) 2 1 AF16-30-10 + AF16-30-10 + AF09-30-10 + BEY16-4 + VEM4 + TF42 This starting mode is therefore ideal for machines having low starting torque such as pumps, centrifugal compressors, wood-working machines... T (motor) Tr (resistive torque) 0 20 40 60 80 100 Motor speed (%) 1SFC101104V0001 I = current T = torque In = nominal current Tn = nominal torque Precaution –– Motor nominal voltage in delta connection must be equal to that of the mains. Example: a motor for 400 V star-delta starting must be designed for 400 V in "delta" connection. Its usual designation is "400 V / 690 V motor". The motor must be constructed with 6 terminal windings –– In order to prevent a high current peak, at least 85 % of nominal speed must be reached before switching from star to delta Sequence AF140-30-11 + AF140-30-11 + AF140-30-11 + BEY140-4 + VM19 + EF146 Starting is a three-stage process: 1st stage: "Star" connection - Press the "On" button on the control circuit to close the KM2 "Star" contactor. The KM1 "line" contactor then closes and the motor starts. Countdown of programmed starting time (6 to 10 s) then begins. 2nd stage: "Star" to "Delta" switching - when programmed starting time is over, the KM2 "Star" contactor opens. 3rd stage: "Delta" connection - Thanks to AF contactors, a transition time (or dwelling time) of 50 ms is already integrated between the opening of the "star" contactor and closing of the "delta" contactor. Conclusion: An on-delay timer without dwelling time (e.g.: CT-ERS.21S or TEF4-ON) is enough to countdown the programmed starting time (6 to 10 s) during "Star connection". The use of a star-delta timer including a dwelling time is not permitted. Main Technical Data Mounting positions Standards IEC 60947-4-1 / EN 60947-4-1 Rated operational voltage Ue max. 690 V - 50/60 Hz Rated insulation voltage Ui acc. to IEC 60947-4-1 690 V acc. to UL / CSA 600 V Ambient air temperature Pos. 1 5/56 | ABB ≤ 60 °C (TF42: 38 A above ≤ 50 °C) IP20 Switching frequency Refer to "Switching frequency diagrams" page 1SBC101956S0201 Close to the device Degree of protection Star-delta starters protected by overload relays With AF contactors - Open type version in kit form Description Star-delta starters for AF09 ... AF38 L Δ Y A2 A2 Fixing clip 2 KM 3 1 KM KM AF09 ... AF38 Contactors VM4 Mechanical interlock unit VE4 Electrical interlock block You can easily assemble star-delta starter thanks to our complete range of accessories: –– For AF09 ... AF38, use VEM4 mechanical and electrical interlock set without increasing starter width. It includes: -- VM4 mechanical interlock unit and 2 fixing clips -- VE4 electrical interlock block with A2-A2 connection. –– For AF40 ... AF370, use VM mechanical interlock unit and additional auxiliary contact blocks for electrical interlocking. –– BEY..-4 connection set: it assures a safe and simple connection between both contactor main terminals. 5 Select now easily and quickly your starter in the following pages at 400 V, up to 200 kW. BEY..-4 Connection set For the full coordination tables: www.abb.com/lowvoltage then go to the right menu: "Support", select: "Online Product Selection Tools" then select "Coordination Tables for motor protection" TF42 Thermal overload relay EF19, EF45 Electronic overload relay Star-delta starters for AF116 ... AF370 BEY..-4 Connection set 2 KM BEY..-4 Connection set 3 KM AF contactor with built-in cable clamps VM Mechanical interlock unit 1 KM AF contactor with built-in cable clamps BEY..-4 Connection set TF/TA Thermal overload relay EF Electronic overload relay 1SBC101956S0201 L Δ Y ABB | 5/57 Star-delta starters protected by thermal overload relays With AF contactors - Open type version in kit form L Δ Line contactor KM1 Delta contactor KM3 Star contactor KM2 Control voltage Uc min. ... Uc max. (1) Type Type Type Order code 24...60 AF09Z-30-10-21 1SBL136001R2110 AF09Z-30-10-21 1SBL136001R2110 AF09Z-30-10-21 1SBL136001R2110 AF09-30-10-13 AF09-30-10-13 1SBL137001R1310 AF12Z-30-10-21 1SBL156001R2110 AF09Z-30-10-21 1SBL136001R2110 AF12-30-10-13 AF09-30-10-13 1SBL137001R1310 AF16Z-30-10-21 1SBL176001R2110 AF09Z-30-10-21 1SBL136001R2110 AF16-30-10-13 AF09-30-10-13 1SBL137001R1310 AF26Z-30-00-21 1SBL236001R2100 AF26Z-30-00-21 1SBL236001R2100 AF26-30-00-13 AF26-30-00-13 1SBL237001R1300 AF26Z-30-00-21 1SBL236001R2100 AF26Z-30-00-21 1SBL236001R2100 AF26-30-00-13 AF26-30-00-13 1SBL237001R1300 AF30Z-30-00-21 1SBL276001R2100 AF26Z-30-00-21 1SBL236001R2100 Y IEC AC-3 Rated power Order code Order code Rated current 220 V 230/240 V 380 V 400 V 415 V 440 V 500 V 690 V 400 V kW kW kW kW kW kW kW kW A V 50/60 Hz V DC 5 4 4 7.5 7.5 7.5 7.5 9 9 15.5 20...60 100...250 100...250 AF09-30-10-13 5.5 5.5 9 11 11 11 11 11 22 24...60 20...60 AF12Z-30-10-21 1SBL156001R2110 100...250 100...250 AF12-30-10-13 7.5 9 15 15 15 15 15 15 29 24...60 20...60 11 18.5 18.5 25 25 25 25 35 24...60 20...60 11 22 22 25 25 25 25 41 24...60 20...60 15 18.5 18.5 25 30 37 45 55 75 90 25 30 37 45 55 75 90 25 37 45 55 75 90 90 132 160 25 37 45 55 75 90 110 132 160 25 37 45 55 75 90 110 132 160 25 37 45 55 75 90 132 132 160 30 37 45 55 75 90 132 160 200 30 37 45 55 75 90 110 132 200 47 66 80 97 132 160 195 230 280 24...60 20...60 1SBL237001R1300 AF26Z-30-00-21 1SBL236001R2100 100...250 100...250 AF26-30-00-13 11 1SBL177001R1310 AF26Z-30-00-21 1SBL236001R2100 100...250 100...250 AF26-30-00-13 11 1SBL157001R1310 AF16Z-30-10-21 1SBL176001R2110 100...250 100...250 AF16-30-10-13 11 1SBL137001R1310 1SBL237001R1300 AF30Z-30-00-21 1SBL276001R2100 1SBL137001R1310 1SBL157001R1310 1SBL177001R1310 1SBL237001R1300 1SBL237001R1300 100...250 100...250 AF30-30-00-13 1SBL277001R1300 AF30-30-00-13 1SBL277001R1300 AF26-30-00-13 1SBL237001R1300 24...60 AF40-30-00-11 1SBL347001R1100 AF40-30-00-11 1SBL347001R1100 AF40-30-00-11 1SBL347001R1100 100...250 100...250 AF40-30-00-13 1SBL347001R1300 AF40-30-00-13 1SBL347001R1300 AF40-30-00-13 1SBL347001R1300 24...60 20...60 AF52-30-00-11 1SBL367001R1100 AF52-30-00-11 1SBL367001R1100 AF40-30-00-11 1SBL347001R1100 100...250 100...250 AF52-30-00-13 20...60 1SBL367001R1300 AF52-30-00-13 1SBL367001R1300 AF40-30-00-13 1SBL347001R1300 24...60 AF65-30-00-11 1SBL387001R1100 AF65-30-00-11 1SBL387001R1100 AF40-30-00-11 1SBL347001R1100 100...250 100...250 AF65-30-00-13 20...60 1SBL387001R1300 AF65-30-00-13 1SBL387001R1300 AF40-30-00-13 1SBL347001R1300 24...60 AF80-30-00-11 1SBL397001R1100 AF80-30-00-11 1SBL397001R1100 AF52-30-00-11 1SBL367001R1100 100...250 100...250 AF80-30-00-13 1SBL397001R1300 AF80-30-00-13 1SBL397001R1300 AF52-30-00-13 1SBL367001R1300 24...60 AF96-30-00-11 1SBL407001R1100 AF96-30-00-11 1SBL407001R1100 AF65-30-00-11 1SBL387001R1100 100...250 100...250 AF96-30-00-13 1SBL407001R1300 AF96-30-00-13 1SBL407001R1300 AF65-30-00-13 1SBL387001R1300 24...60 20...60 20...60 AF116-30-11-11 1SFL427001R1111 AF116-30-11-11 1SFL427001R1111 AF116-30-11-11 (4) 1SFL427001R1111 100...250 100...250 AF116-30-11-13 1SFL427001R1311 20...60 AF116-30-11-13 1SFL427001R1311 AF116-30-11-13 1SFL427001R1311 24...60 AF140-30-11-11 1SFL447001R1111 AF140-30-11-11 1SFL447001R1111 AF116-30-11-11 1SFL427001R1111 100...250 100...250 AF140-30-11-13 1SFL447001R1311 AF140-30-11-13 1SFL447001R1311 AF116-30-11-13 1SFL427001R1311 24...60 AF190-30-11-11 1SFL487002R1111 AF190-30-11-11 1SFL487002R1111 AF140-30-11-11 1SFL447001R1111 100...250 100...250 AF190-30-11-13 1SFL487002R1311 AF190-30-11-13 1SFL487002R1311 AF140-30-11-13 1SFL447001R1311 20...60 20...60 (1) AF09 ... AF190: ambient temperature ≤ 60 °C. (2) The setting current value is: nominal motor current x 0.58. Overload relay type given for 400 V - AC-3. For other voltage, select overload relay type according to required nominal motor current x 0.58. (3) On-delay timer without dwelling-time (e.g.: side-mounted CT-ERS.21S or front-mounted TEF4-ON) is enough to countdown the programmed starting time during "Star connection". In case of use of front-mounted TEF4-ON on-delay timer, mount on KM1 contactor AF26 ... AF96 a side-mounted CAL4-11 auxiliary contact block instead of CA4-10 auxiliary contact block. (4) AF80 can also be used, but no connection set and mechanical interlock is available for this combination. 5/58 | ABB Thermal overload relays (2) Electronic timers (3) Accessories Auxiliary contact blocks Connection sets BEY..-4 CT-ERS Setting ranges TEF4-ON Uc = 24...240 V 50/60 Hz or DC Mechanical and electrical interlock sets CA4 VEM4 Type Order code Type Order code Type Order code Type Order code 7.60...10.0 TF42-10 1SAZ721201R1043 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY16-4 + VEM4 1SBN081313R2000 1SBN030111R1000 - - 10.0...13.0 TF42-13 1SAZ721201R1045 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY16-4 + VEM4 1SBN081313R2000 1SBN030111R1000 - - 16.0...20.0 TF42-20 1SAZ721201R1049 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY16-4 + VEM4 1SBN081313R2000 1SBN030111R1000 - - 20.0...24.0 TF42-24 1SAZ721201R1051 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY38-4 + VEM4 1SBN082713R2000 1SBN030111R1000 KM1 : 1 x CA4-10 KM2 : 1 x CA4-10 1SBN010110R1010 1SBN010110R1010 20.0...24.0 TF42-24 1SAZ721201R1051 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY38-4 + VEM4 1SBN082713R2000 1SBN030111R1000 KM1 : 1 x CA4-10 KM2 : 1 x CA4-10 1SBN010110R1010 1SBN010110R1010 24.0...29.0 TF42-29 1SAZ721201R1052 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY38-4 + VEM4 1SBN082713R2000 1SBN030111R1000 KM1 : 1 x CA4-10 KM2 : 1 x CA4-10 1SBN010110R1010 1SBN010110R1010 30.0...40.0 TF65-40 1SAZ811201R1003 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY65-4 + VM96-4 1SBN083413R2000 1SBN033405T1000 KM1 : 1 x CA4-10 (3) KM2 : 1 x CA4-10 1 x CA4-01 KM3 : 1 x CA4-01 1SBN010110R1010 1SBN010110R1010 1SBN010110R1001 1SBN010110R1001 36.0...47.0 TF65-47 1SAZ811201R1004 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY65-4 + VM96-4 1SBN083413R2000 1SBN033405T1000 KM1 : 1 x CA4-10 (3) KM2 : 1 x CA4-10 1 x CA4-01 KM3 : 1 x CA4-01 1SBN010110R1010 1SBN010110R1010 1SBN010110R1001 1SBN010110R1001 50.0...60.0 TF65-60 1SAZ811201R1006 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY65-4 + VM96-4 1SBN083413R2000 1SBN033405T1000 KM1 : 1 x CA4-10 (3) KM2 : 1 x CA4-10 1 x CA4-01 KM3 : 1 x CA4-01 1SBN010110R1010 1SBN010110R1010 1SBN010110R1001 1SBN010110R1001 65.0...78.0 TF96-78 1SAZ911201R1004 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY96-4 + VM96-4 1SBN083913R2000 1SBN033405T1000 KM1 : 1 x CA4-10 (3) KM2 : 1 x CA4-10 1 x CA4-01 KM3 : 1 x CA4-01 1SBN010110R1010 1SBN010110R1010 1SBN010110R1001 1SBN010110R1001 84.0...96.0 TF96-96 1SAZ911201R1006 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY96-4 + VM96-4 1SBN083913R2000 1SBN033405T1000 KM1 : 1 x CA4-10 (3) KM2 : 1 x CA4-10 1 x CA4-01 KM3 : 1 x CA4-01 1SBN010110R1010 1SBN010110R1010 1SBN010110R1001 1SBN010110R1001 100...135 TF140DU-135 1SAZ431201R1003 CT-ERS.21S 1SVR730100R0300 BEY140-4 + VM19 1SFN084413R1000 1SFN030300R1000 - - 100...135 TF140DU-135 1SAZ431201R1003 CT-ERS.21S 1SVR730100R0300 BEY140-4 + VM19 1SFN084413R1000 1SFN030300R1000 - - 130...175 TA200DU-175 1SAZ421201R1005 CT-ERS.21S 1SVR730100R0300 BEY190-4 + VM140/190 1SFN084813R1000 1SFN034403R1000 - - A 1SBC101959S0201 5 ABB | 5/59 Star-delta starters protected by electronic overload relays With AF contactors - Open type version in kit form L Δ Line contactor KM1 Delta contactor KM3 Star contactor KM2 Control voltage Uc min. ... Uc max. (1) Type Type Type Order code 24...60 AF09Z-30-10-21 1SBL136001R2110 AF09Z-30-10-21 1SBL136001R2110 AF09Z-30-10-21 1SBL136001R2110 AF09-30-10-13 AF09-30-10-13 1SBL137001R1310 AF12Z-30-10-21 1SBL156001R2110 AF09Z-30-10-21 1SBL136001R2110 AF12-30-10-13 AF09-30-10-13 1SBL137001R1310 AF16Z-30-10-21 1SBL176001R2110 AF09Z-30-10-21 1SBL136001R2110 AF16-30-10-13 AF09-30-10-13 1SBL137001R1310 AF26Z-30-00-21 1SBL236001R2100 AF26Z-30-00-21 1SBL236001R2100 AF26-30-00-13 AF26-30-00-13 1SBL237001R1300 AF26Z-30-00-21 1SBL236001R2100 AF26Z-30-00-21 1SBL236001R2100 AF26-30-00-13 AF26-30-00-13 1SBL237001R1300 AF30Z-30-00-21 1SBL276001R2100 AF26Z-30-00-21 1SBL236001R2100 Y IEC AC-3 Rated power Order code Order code Rated current 220 V 230/240 V 380 V 400 V 415 V 440 V 500 V 690 V 400 V kW kW kW kW kW kW kW kW A V 50/60 Hz V DC 5 4 4 7.5 7.5 7.5 7.5 9 9 15.5 20...60 100...250 100...250 AF09-30-10-13 5.5 5.5 9 11 11 11 11 11 22 24...60 20...60 AF12Z-30-10-21 1SBL156001R2110 100...250 100...250 AF12-30-10-13 7.5 9 15 15 15 15 15 15 29 24...60 20...60 11 18.5 18.5 25 25 25 25 35 24...60 20...60 11 22 22 25 25 25 25 41 24...60 20...60 15 18.5 18.5 25 30 37 45 55 75 90 110 132 160 200 25 30 37 45 55 75 90 110 132 160 200 25 37 45 55 75 90 90 132 160 160 250 315 315 25 37 45 55 75 90 110 132 160 200 250 315 355 25 37 45 55 75 90 110 132 160 200 250 315 355 25 37 45 55 75 90 132 132 160 200 250 355 400 30 37 45 55 75 90 132 160 200 250 315 400 400 30 37 45 55 75 90 110 132 200 250 355 400 500 47 66 80 97 132 160 195 230 280 350 430 540 610 24...60 20...60 1SBL237001R1300 AF26Z-30-00-21 1SBL236001R2100 100...250 100...250 AF26-30-00-13 11 1SBL177001R1310 AF26Z-30-00-21 1SBL236001R2100 100...250 100...250 AF26-30-00-13 11 1SBL157001R1310 AF16Z-30-10-21 1SBL176001R2110 100...250 100...250 AF16-30-10-13 11 1SBL137001R1310 1SBL237001R1300 AF30Z-30-00-21 1SBL276001R2100 1SBL137001R1310 1SBL157001R1310 1SBL177001R1310 1SBL237001R1300 1SBL237001R1300 100...250 100...250 AF30-30-00-13 1SBL277001R1300 AF30-30-00-13 1SBL277001R1300 AF26-30-00-13 1SBL237001R1300 24...60 AF40-30-00-11 1SBL347001R1100 AF40-30-00-11 1SBL347001R1100 AF40-30-00-11 1SBL347001R1100 100...250 100...250 AF40-30-00-13 1SBL347001R1300 AF40-30-00-13 1SBL347001R1300 AF40-30-00-13 1SBL347001R1300 24...60 20...60 AF52-30-00-11 1SBL367001R1100 AF52-30-00-11 1SBL367001R1100 AF40-30-00-11 1SBL347001R1100 100...250 100...250 AF52-30-00-13 20...60 1SBL367001R1300 AF52-30-00-13 1SBL367001R1300 AF40-30-00-13 1SBL347001R1300 24...60 AF65-30-00-11 1SBL387001R1100 AF65-30-00-11 1SBL387001R1100 AF40-30-00-11 1SBL347001R1100 100...250 100...250 AF65-30-00-13 20...60 1SBL387001R1300 AF65-30-00-13 1SBL387001R1300 AF40-30-00-13 1SBL347001R1300 24...60 AF80-30-00-11 1SBL397001R1100 AF80-30-00-11 1SBL397001R1100 AF52-30-00-11 1SBL367001R1100 100...250 100...250 AF80-30-00-13 1SBL397001R1300 AF80-30-00-13 1SBL397001R1300 AF52-30-00-13 1SBL367001R1300 24...60 AF96-30-00-11 1SBL407001R1100 AF96-30-00-11 1SBL407001R1100 AF65-30-00-11 1SBL387001R1100 100...250 100...250 AF96-30-00-13 1SBL407001R1300 AF96-30-00-13 1SBL407001R1300 AF65-30-00-13 1SBL387001R1300 24...60 20...60 20...60 AF116-30-11-11 1SFL427001R1111 AF116-30-11-11 1SFL427001R1111 AF116-30-11-11 (4) 1SFL427001R1111 100...250 100...250 AF116-30-11-13 1SFL427001R1311 20...60 AF116-30-11-13 1SFL427001R1311 AF116-30-11-13 1SFL427001R1311 24...60 AF140-30-11-11 1SFL447001R1111 AF140-30-11-11 1SFL447001R1111 AF116-30-11-11 1SFL427001R1111 100...250 100...250 AF140-30-11-13 1SFL447001R1311 AF140-30-11-13 1SFL447001R1311 AF116-30-11-13 1SFL427001R1311 24...60 AF190-30-11-11 1SFL487002R1111 AF190-30-11-11 1SFL487002R1111 AF140-30-11-11 1SFL447001R1111 100...250 100...250 AF190-30-11-13 1SFL487002R1311 AF190-30-11-13 1SFL487002R1311 AF140-30-11-13 1SFL447001R1311 24...60 AF205-30-11-11 1SFL527002R1111 AF205-30-11-11 1SFL527002R1111 AF190-30-11-11 1SFL487002R1111 100...250 100...250 AF205-30-11-13 1SFL527002R1311 AF205-30-11-13 1SFL527002R1311 AF190-30-11-13 1SFL487002R1311 24...60 AF265-30-11-11 1SFL547002R1111 AF265-30-11-11 1SFL547002R1111 AF205-30-11-11 1SFL527002R1111 100...250 100...250 AF265-30-11-13 1SFL547002R1311 AF265-30-11-13 1SFL547002R1311 AF205-30-11-13 1SFL527002R1311 24...60 AF370-30-11-11 1SFL607002R1111 AF370-30-11-11 1SFL607002R1111 AF265-30-11-11 1SFL547002R1111 100...250 100...250 AF370-30-11-13 1SFL607002R1311 AF370-30-11-13 1SFL607002R1311 AF265-30-11-13 1SFL547002R1311 24...60 AF370-30-11-11 1SFL607002R1111 AF370-30-11-11 1SFL607002R1111 AF305-30-11-11 1SFL587002R1111 100...250 100...250 AF370-30-11-13 1SFL607002R1311 AF370-30-11-13 1SFL607002R1311 AF305-30-11-13 1SFL587002R1311 20...60 20...60 20...60 20...60 20...60 20...60 (1) AF09 ... AF370: ambient temperature ≤ 60 °C. (2) The setting current value is: nominal motor current x 0.58. Overload relay type given for 400 V - AC-3. For other voltage, select overload relay type according to required nominal motor current x 0.58. (3) On-delay timer without dwelling-time (e.g.: side-mounted CT-ERS.21S or front-mounted TEF4-ON) is enough to countdown the programmed starting time during "Star connection". In case of use of front-mounted TEF4-ON on-delay timer, mount on KM1 contactor AF26 ... AF96 a side-mounted CAL4-11 auxiliary contact block instead of CA4-10 auxiliary contact block. (4) AF80 can also be used, but no connection set and mechanical interlock is available for this combination. 5/60 | ABB Electronic overload relays (2) Electronic timers (3) Accessories Auxiliary contact blocks Connection sets BEY..-4 CT-ERS Setting ranges TEF4-ON Uc = 24...240 V 50/60 Hz or DC Mechanical and electrical interlock sets CA4 VEM4 Type Order code Type Order code Type Order code Type Order code 5.70…18.9 EF19-18.9 1SAX121001R1105 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY16-4 + VEM4 1SBN081313R2000 1SBN030111R1000 - - 5.70…18.9 EF19-18.9 1SAX121001R1105 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY16-4 + VEM4 1SBN081313R2000 1SBN030111R1000 - - 5.70…18.9 EF19-18.9 1SAX121001R1105 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY16-4 + VEM4 1SBN081313R2000 1SBN030111R1000 - - 9.00…30.0 EF45-30 1SAX221001R1101 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY38-4 + VEM4 1SBN082713R2000 1SBN030111R1000 KM1 : 1 x CA4-10 KM2 : 1 x CA4-10 1SBN010110R1010 1SBN010110R1010 9.00…30.0 EF45-30 1SAX221001R1101 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY38-4 + VEM4 1SBN082713R2000 1SBN030111R1000 KM1 : 1 x CA4-10 KM2 : 1 x CA4-10 1SBN010110R1010 1SBN010110R1010 9.00…30.0 EF45-30 1SAX221001R1101 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY38-4 + VEM4 1SBN082713R2000 1SBN030111R1000 KM1 : 1 x CA4-10 KM2 : 1 x CA4-10 1SBN010110R1010 1SBN010110R1010 25…70 EF65-70 1SAX331001R1101 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY65-4 + VM96-4 1SBN083413R2000 1SBN033405T1000 KM1 : 1 x CA4-10 (3) KM2 : 1 x CA4-10 1 x CA4-01 KM3 : 1 x CA4-01 1SBN010110R1010 1SBN010110R1010 1SBN010110R1001 1SBN010110R1001 25…70 EF65-70 1SAX331001R1101 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY65-4 + VM96-4 1SBN083413R2000 1SBN033405T1000 KM1 : 1 x CA4-10 (3) KM2 : 1 x CA4-10 1 x CA4-01 KM3 : 1 x CA4-01 1SBN010110R1010 1SBN010110R1010 1SBN010110R1001 1SBN010110R1001 25…70 EF65-70 1SAX331001R1101 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY65-4 + VM96-4 1SBN083413R2000 1SBN033405T1000 KM1 : 1 x CA4-10 (3) KM2 : 1 x CA4-10 1 x CA4-01 KM3 : 1 x CA4-01 1SBN010110R1010 1SBN010110R1010 1SBN010110R1001 1SBN010110R1001 36…100 EF96-100 1SAX341001R1101 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY96-4 + VM96-4 1SBN083913R2000 1SBN033405T1000 KM1 : 1 x CA4-10 (3) KM2 : 1 x CA4-10 1 x CA4-01 KM3 : 1 x CA4-01 1SBN010110R1010 1SBN010110R1010 1SBN010110R1001 1SBN010110R1001 36…100 EF96-100 1SAX341001R1101 CT-ERS.21S or TEF4-ON 1SVR730100R0300 1SBN020112R1000 BEY96-4 + VM96-4 1SBN083913R2000 1SBN033405T1000 KM1 : 1 x CA4-10 (3) KM2 : 1 x CA4-10 1 x CA4-01 KM3 : 1 x CA4-01 1SBN010110R1010 1SBN010110R1010 1SBN010110R1001 1SBN010110R1001 54…150 EF146-150 1SAX351001R1101 CT-ERS.21S 1SVR730100R0300 BEY140-4 + VM19 1SFN084413R1000 1SFN030300R1000 - - 54…150 EF146-150 1SAX351001R1101 CT-ERS.21S 1SVR730100R0300 BEY140-4 + VM19 1SFN084413R1000 1SFN030300R1000 - - 63…210 EF205-210 1SAX531001R1101 CT-ERS.21S 1SVR730100R0300 BEY190-4 + VM140/190 1SFN084813R1000 1SFN034403R1000 - - 63…210 EF205-210 1SAX531001R1101 CT-ERS.21S 1SVR730100R0300 BEY205-4 + VM19 1SFN085213R1000 1SFN030300R1000 - - 115…380 EF370-380 1SAX611001R1101 CT-ERS.21S 1SVR730100R0300 BEY265-4 + VM205/265 1SFN085413R1000 1SFN035203R1000 - - 115…380 EF370-380 1SAX611001R1101 CT-ERS.21S 1SVR730100R0300 BEY370-4 + VM19 1SFN085813R1000 1SFN030300R1000 - - 115…380 EF370-380 1SAX611001R1101 CT-ERS.21S 1SVR730100R0300 BEY370-4 + VM19 1SFN085813R1000 1SFN030300R1000 - - A 1SBC101960S0201 5 ABB | 5/61 Star-delta starters protected by overload relays With AF contactors - Open type version in kit form Switching frequency diagrams General Switching frequency/hour, according to acceleration time and load factor. Respect of the following conditions enables utilization of the starter without excessive overheating of the connections or nuisance tripping of the thermal overload relay. Thermal overload relay Example: 70 60 ta = Starting time of the motor: 7 second (use 8s curve) - Duty ratio: 63 % means a permitted switching frequency of max. 15 operating cycles per hour. 5s 50 40 ta = ta = 30 This corresponds to a 4 minute operating cycle (15 starts/hr) with 7 seconds acceleration, 2.5 minutes operation and 1.5 minutes rest. 8s 10 s ta = 1 2s 20 ta = 15 s ta = 20 s 10 0 0 10 20 30 40 50 60 70 80 90 100 Duty ratio (%) ta: motor starting time Electronic overload relay : please consult us 1SBC101958S0201 5 Switching frequency (ops/h) Intermittent periodic duty 5/62 | ABB Star-delta starters protected by overload relays With AF contactors - Open type version in kit form Wiring diagrams with CT-ERS.21S timer Star-delta starters Power circuit AC or DC local control with CT-ERS.21S timer KM3:5/L3 Us A 95 RESET M 96 5/L3 3/L2 1/L1 I .4 6/T3 4/T2 .3 A2 2/T1 KM1 .3 W1 V1 U1 W2 V2 U2 W1 V1 U1 W2 V2 U2 KM1 KM3 A2 A2 CT-ERS.21S KM2 (2) (1) A2 A2 5 With VM KM3 KM2 21 16 01 01 (2) A1 A1 KM3 22 With VEM4 15 21 6/T3 A1 A1 A2 A2 KM2 Us N KM3:3/L2 L (3) ∆ Y AC or DC remote control with CT-ERS.21S timer KM3:5/L3 Us A 95 RESET M 96 STOP FR1 .3 0 KM1 I .3 .4 KM3 A2 A2 (2) A2 (1) A2 CT-ERS.21S With VM KM2 KM2 KM3 21 16 01 01 (2) A1 A1 KM3 22 KM1 15 21 With VEM4 KT1 22 KM2 .4 A1 A1 A2 A2 KM2 Us N KM3:3/L2 L ∆ (3) Y Note: - VEM4 = VM4 (1) + VE4 (2) with A2-A2 (3) connection (Except for coil Uc 12-20 V DC : use VM4 with CA4). - coil Uc 12-20 V DC : A1+, A2- 1SBC101957S0201 4/T2 2/T1 98 96 KT1 22 .4 97 KM2 FR1 TEST STOP FR1 A1 3/L2 1/L1 5/L3 6/T3 4/T2 2/T1 6/T3 4/T2 2/T1 A2 KM2 A M 95 RESET A1 5/L3 3/L2 KM3 A2 KM1 A1 1/L1 STOP ABB | 5/63 Star-delta starters protected by overload relays With AF contactors - Open type version in kit form Wiring diagrams with TEF4-ON timer Star-delta starters AC or DC local control with TEF4-ON timer Uc = 24...240 V 50/60 Hz or DC KM3:5/L3 95 RESET A M Us 96 Power circuit 5/L3 3/L2 1/L1 I .4 6/T3 4/T2 2/T1 A2 6/T3 4/T2 2/T1 A2 6/T3 KM1 .3 A KM2 97 6/T3 KT1 55 A1 A2 A1 KM1 With VM 01 (2) A2 01 (2) KM2 21 W2 V2 U2 KM3 22 TEF4-ON W1 V1 U1 56 With VEM4 21 4/T2 2/T1 98 TEST STOP .4 FR1 22 M 95 RESET 96 A1 W1 V1 U1 W2 V2 U2 KM3 Us N KM3:3/L2 (1) A2 L ∆ A2 KM2 KM3 A2 A1 (1) A2 KM2 Y (3) AC or DC remote control with TEF4-ON timer Uc = 24...240 V 50/60 Hz or DC KM3:5/L3 96 95 RESET A M Us STOP FR1 .3 O KM1 I I .3 .4 KM2 .4 KT1 55 KM1 A2 01 (2) KM2 21 With VM 01 (2) KM3 22 A2 A1 21 TEF4-ON A1 56 With VEM4 22 A1 KM3 Us N KM3:3/L2 L A2 ∆ (1) (3) A2 KM2 KM3 A2 A1 (1) A2 KM2 Y Note: VEM4 = VM4 (1) + VE4 (2) with A2-A2 (3) connection 1SBC101962S0201 5 4/T2 2/T1 A2 .3 KM2 FR1 A1 5/L3 3/L2 1/L1 5/L3 3/L2 KM3 A1 KM1 A1 1/L1 STOP 5/64 | ABB Star-delta starters protected by thermal overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 102.5 4.04" 71 2.80" 10 0.39" 125 4.92" 4x M4 8-32 UNC 70 2.76" 60 2.36" 5.5 0.22" 166.5 6.55" 35 mm EN/IEC 60715 35 1.38" 5 0.20" 135 5.31" 5 0.20" ø 4.2 0.17" 6.2 0.24" 5 AF09, AF12, AF16 + BEY16-4, VEM4 + TF42 thermal overload relay 72.7 2.86" 76.8 3.02" 119.5 4.70" 80 3.15" 10 0.39" 2x M4 8-32 UNC 171 6.73" 70 2.76" 5.5 0.22" 60 2.36" 35 mm EN/IEC 60715 125 4.92" ø 4.2 0.17" 5 0.20" 135 5.31" 5 0.20" 9.2 0.36" AF26, AF30, AF38 + BEY38-4, VEM4, CA4-10 + TF42 thermal overload relay 125 4.92" 79.8 3.14" 4x M4 8-32 UNC ø 4.2 0.17" 1SBC101963S0201 60 2.36" 70 2.76" 35 1.38" 5 0.20" 10 0.39" 75.7 2.98" 5 0.20" Note: contactor lateral distance to grounded component 2 mm 0.08" min. ABB | 5/65 Star-delta starters protected by thermal overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 144 5.67" 111 4.37" 223 8.78" 35 x 15 mm EN/IEC 60715 165 6.50" 5 10 0.39" 5.5 0.22" 4 0.16" 106.8 4.20" AF40, AF52, AF65 + BEY65-4, VM96-4, CA4-10, CA4-01 + TF65 thermal overload relay 110.6 4.35" 155 6.10" M6 ¼-20 UNC 45 1.78" 4.6 0.18" 100 3.94" 110 4.33" M4 8-32 UNC ø 4.2 0.17" 5 0.20" 1SBC101964S0201 ø 6.4 0.25" 5/66 | ABB Star-delta starters protected by thermal overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 149 5.87" 195 7.68" 226 8.90" 35 x 15 mm EN/IEC 60715 116 4.57" 10 0.39" 5.5 0.22" 5 4 0.16" 106.8 4.20" Line, Delta: AF80, AF96 + Star: AF52, AF65 + BEY96-4, VM96-4, CA4-10, CA4-01 + TF96 thermal overload relay 110.9 4.37" 185 7.28" 45 1.77" 60 2.36" 2x M4 8-32 UNC ø 4.2 0.17" ø 6.4 0.25" ø 6.4 0.25" 4.8 0.19" 100 3.94" M6 ¼-20 UNC 5 0.20" 70 2.76" 1SBC101965S0201 110 4.33" 2x M6 ¼-20 UNC ABB | 5/67 Star-delta starters protected by thermal overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 270 10.63" 272 10.71" 126 4.96" 5 AF116, AF140, AF146 + BEY140-4, VM19 + TF140 thermal overload relay 60 2.36" 30 1.18" 60 2.36" 30 1.18" 12 x M4 8-32 UNC 45 1.77" 100 3.94" 30 1.18" 82.3 3.24" 4x M5 10-24 UNC 37 1.46" 1SFC101170C0201 50 1.97" 5/68 | ABB Star-delta starters protected by thermal overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 152 5.98" 339 13.35" 310 12.20" 5 62 2.44" Line, Delta: AF190, AF205 + Star: AF116, AF140, AF146 + BEY190-4, VM140/190 + TA200 thermal overload relay 12 x M5 10-24 UNC 35 70 2.76" 35 1.38" 75 2.95" 30 4x M4 8-32 UNC 1.18" 82 3.23" 25.5 1.00" 100 3.94" 165 6.50" 1.38" 4 0.16" 126 4.96" 37 1.46" 1SFC101171C0201 50 1.97" ABB | 5/69 Star-delta starters protected by electronic overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 102.5 4.04" 71 2.80" 10 0.39" 5.5 0.22" 163 6.42" 35 mm EN/IEC 60715 135 5.31" 17.4 0.69" 5 73.3 2.89" AF09, AF12, AF16 + BEY16-4, VEM4 + EF19 electronic overload relay 76.8 3.02" 119.5 4.70" 135 5.31" 10 0.39" 5.5 0.22" D 35 mm EN/IEC 60715 80 3.15" A B A B C D EF19 20.4 0.80" 76.3 3.00" 79.8 3.14" 165.9 6.53" EF45 0 0.00" 82.5 3.25" 86 3.39" 183.5 7.22" C AF26, AF30, AF38 + BEY38-4, VEM4, CA4-10 + EF19/EF45 electronic overload relay 125 4.92" 4x M4 8-32 UNC ø 4.2 0.17" 5 0.20" Note: contactor lateral distance to grounded component 2 mm 0.08" min. 5/70 | ABB 1SBC101966S0201 60 2.36" 70 2.76" 35 1.38" 5 0.20" 10 0.39" Star-delta starters protected by electronic overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 144 5.67" 111 4.37" 251 9.88" 35 x 15 mm EN/IEC 60715 173 6.81" 10 0.39" 5.5 0.22" 5.4 0.21" 5 106.8 4.20" AF40, AF52, AF65 + BEY65-4, VM96-4, CA4-10, CA4-01 + EF65 electronic overload relay 110.6 4.35" 155 6.10" M6 ¼-20 UNC 45 1.78" 4.6 0.18" 100 3.94" ø 4.2 0.17" ø 6.4 0.25" 5 0.20" 1SBC101967S0201 110 4.33" M4 8-32 UNC ABB | 5/71 Star-delta starters protected by electronic overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 149 5.87" 195 7.68" 251 9.88" 151 5.94" 35 x 15 mm EN/IEC 60715 116 4.57" 5.5 0.22" 5.4 0.21" 5 106.8 4.20" Line, Delta: AF80, AF96 + Star: AF52, AF65 + BEY96-4, VM96-4, CA4-10, CA4-01 + EF96 electronic overload relay 110.6 4.35" 185 7.28" 45 1.77" 60 2.36" 2x M6 ¼-20 UNC 2x M4 8-32 UNC ø 4.2 0.17" ø 6.4 0.25" ø 6.4 0.25" 4.8 0.19" 100 3.94" M6 ¼-20 UNC 110 4.33" 10 0.39" 5 0.20" 1SBC101968S0201 70 2.76" 5/72 | ABB Star-delta starters protected by electronic overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 126 4.96" 281.5 11.08" 270 10.63" 5 AF116, AF140, AF146 + BEY140-4, VM19 + EF146 electronic overload relay 60 2.36" 30 1.18" 60 2.36" 30 1.18" 14 x M4 8-32 UNC 43.8 1.72" 100 3.94" 30 1.18" 21.5 94.7 3.73" 0.85" 2x M5 10-24 UNC 1SFC101172C0201 37 1.46" ABB | 5/73 Star-delta starters protected by electronic overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 310 12.20" 369 14.53" Line, Delta: AF190, AF205 + Star: AF116, AF140, AF146 + BEY190-4, VM140/190 + EF205 electronic overload relay 12 x M5 10-24 UNC 35 1.38" 70 2.76" 35 75 2.95" 30 1.18" 1.38" 100 3.94" 0.81" 20.5 165 6.50" 4x M4 8-32 UNC 1SFC101173C0201 112 4.42" 5 152 5.98" 5/74 | ABB Star-delta starters protected by electronic overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 152 5.98" 369 14.53" 315 12.40" 5 AF190, AF205 + BEY205-4, VM19 + EF205 electronic overload relay 16 x M5 10-24 UNC 35 70 2.76" 35 1.38" 70 2.76" 35 1.38" 25.5 82 3.23" 1.00" 165 6.50" 1.38" 37 1.46" 1SFC101174C0201 50 1.97" ABB | 5/75 Star-delta starters protected by electronic overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 395 15.55" 417 16.42" Line, Delta: AF265, AF305, AF370 + Star: AF190, AF205 + BEY265-4, VM205/265 + EF370 electronic overload relay 43.75 96.25 3.79" 43.75 1.72" 93.12 3.67" 35 1.38" 16 x M5 10-24 UNC 29 1.14" 187 7.36" 165 6.50" 1.72" 112 4.41" 35 1.38" 1SFC101175C0201 5 180 7.09" 5/76 | ABB Star-delta starters protected by electronic overload relay With AF contactors - Open type version in kit form Main dimensions mm, inches 420 16.54" 180 7.09" 417 16.42" 5 AF205, AF305, AF370 + BEY370-4, VM19 + EF370 electronic overload relay 43.75 96.25 3.79" 43.75 1.72" 96.25 3.79" 43.75 16 x M5 10-24 UNC 1.72" 1SFC101176C0201 112 4.41" 29 1.14" 187 7.36" 1.72" 35 1.38" ABB | 5/77 Summary_5-2 5 5/78 | ABB AF 3-pole contactors Overview 5/80 Ordering details 4 to 45 kW / 5 to 60 hp AF09 … AF38 AC / DC operated 5/82 AF09Z … AF38Z AC / DC operated - low consumption 5/83 AF40 ... AF96 AC / DC operated 5/84 Main accessories 5/86 55 to 200 kW / 75 to 350 hp AF116 ... AF146 AC / DC operated 5/88 AF190 ... AF370 AC / DC operated 5/90 Main accessories 5/92 AF116 ... AF146 AC / DC operated with 1 N.O. + 1 N.C. 5/94 AF190 ... AF370 AC / DC operated with 1 N.O. + 1 N.C. 5/96 Main accessories 5 5/98 200 to 560 kW / 350 to 900 hp AF400 ... AF750 AC / DC operated with 1 N.O. + 1 N.C. AF1250 ... AF2650 AC / DC operated with 1 N.O. + 1 N.C. Main accessories 5/100 5/101 5/102 4 to 45 kW / 5 to 60 hp - 2-stack AF09 ... AF38 AC / DC operated 5/104 AF09Z ... AF38Z AC / DC operated - low consumption 5/105 AF40 ... AF65 AC / DC operated 5/106 AF80 ... AF96 AC / DC operated Main accessories 5/107 5/108 55 to 560 kW / 75 to 900 hp AF116 ... AF146 AC / DC operated with 2 N.O. + 2 N.C. 5/110 AF190 ... AF370 AC / DC operated with 2 N.O. + 2 N.C. 5/112 Main accessories 5/114 AF400 ... AF750 AC / DC operated with 2 N.O. + 2 N.C. 5/116 AF1250 ... AF2650 AC / DC operated with 2 N.O. + 2 N.C. 5/117 Main accessories 5/118 5/120 5/137 Terminal marking and positioning 5/141 Main dimensions 5/144 Voltage code table 5/392 Summary_5-2 Technical data Electrical durability ABB | 5/79 3-pole contactors, for motor control and power switching Type AF09 AF12 AF16 AF26 AF30 AF38 AF40 AF52 AF65 AF80 AF96 220 - 230 - 240 V 380 - 400 V 415 V 440 V 500 V 690 V 1000 V 380 - 400 V θ ≤ 40 °C, 690 V kW kW kW kW kW kW kW A A 2.2 4 4 4 5.5 5.5 — 9 25 3 5.5 5.5 5.5 7.5 7.5 — 12 28 4 7.5 9 9 9 9 — 18 30 6.5 11 11 15 15 15 — 26 45 9 15 15 18.5 18.5 18.5 — 32 50 11 18.5 18.5 22 22 22 — 38 50 11 18.5 22 22 22 22 — 40 70 15 22 30 30 30 30 — 53 100 18.5 30 37 37 37 37 — 65 105 22 37 45 45 45 45 — 80 125 25 45 55 55 55 55 — 96 130 120 V 240 V 200 - 208 V 220 - 240 V 440 - 480 V 550 - 600 V 600 V hp hp hp hp hp hp A 0.75 1.5 2 2 5 7.5 25 00 1 2 3 3 7.5 10 28 0 1.5 3 5 5 10 15 30 — 2 3 7.5 7.5 15 20 45 1 2 5 10 10 20 25 50 — 2 5 10 10 25 30 50 — 3 7.5 10 15 30 40 60 2 3 10 15 20 40 50 80 — 5 15 20 25 50 60 90 — 7.5 15 25 30 60 75 105 3 7.5 20 30 30 60 75 115 — AC / DC Control supply 5 IEC AC-3 Rated operational power θ ≤ 60 °C for AF09 ... AF370 θ ≤ 55 °C for AF400 ... AF2650 Rated operational current AC-1 Rated operational current UL / CSA 1-phase motor rating 3-phase motor rating NEMA General use rating NEMA Size Main accessories Auxiliary contact blocks Front mounting Timers Side mounting Electronic Interlocking units Mechanical CA4-10 (1 x N.O.) CA4-01 (1 x N.C.) CAL4-11 (1 x N.O. + 1 x N.C.) TEF4-ON TEF4-OFF VM4 VM96-4 Mechanical / Electrical For reversing contactors VEM4 BER16-4 BER38-4 Built-in surge protection BER65-4 BER96-4 Thermal relays Class 10 TF42 (0.10…38 A) TF65 (22...67 A) TF96 (40...96 A) Electronic relays Class 10E, 20E, 30E EF19 (0.10…18.9 A) EF65 (20...70 A) EF96 (36...100 A) Thermal / magnetic protection Class 10 MS116 (0.10...32 A) Connection sets Surge suppressors Overload relays (Class 10A for TF140, TA200DU) EF19 (0.10…18.9 A) EF45 (9…45 A) Manual motor starters MS450 (28...50 A) lcs up to 50 kA lcs up to 50 kA for class 10 A MS132 (0.10...32 A) lcs up to 100 kA MS495 (45…100 A) Ics up to 50 kA MS497 (22…100 A) Ics up to 100 kA Magnetic only types MO132 MO496 (0.16...32 A) Ics up to 100 kA (32…100 A) Ics up to 100 kA MO450 (40…50 A) Ics up to 50 kA Accessories 5/80 | ABB For contactor mounting BEA16-4 BEA38-4 MO495 (63…100 A) Ics up to 50 kA AF116 AF140 AF146 AF190 AF205 AF265 AF305 AF370 AF400 AF460 AF580 AF750 AF1250 AF1350 AF1650 AF2050 AF2650 30 55 55 75 75 55 — 116 160 37 75 75 90 90 75 — 140 200 45 75 75 90 90 90 75 146 225 55 90 90 110 110 132 110 190 275 55 110 110 132 132 160 132 205 350 75 132 132 160 160 200 132 265 400 90 160 160 160 200 250 132 305 500 110 200 200 200 250 315 132 370 600 110 200 220 220 250 315 220 400 600 132 250 250 250 315 355 280 460 700 160 315 355 355 400 500 355 580 800 220 400 425 450 520 600 400 750 1050 — — — — — — — — 1260 257 475 500 560 560 750 — 860 1350 315 560 600 670 700 900 — 1050 1650 — — — — — — — — 2050 — — — — — — — — 2650 — — 30 40 75 100 160 — — — 40 50 100 125 200 4 — — 40 50 100 125 200 — — — 50 60 125 150 250 — — — 60 75 150 200 300 — — — 75 100 200 250 350 5 — — 100 125 250 300 400 — — — 125 150 300 350 520 — — — 125 150 350 400 550 — — — 150 200 400 500 650 6 — — 200 250 500 600 750 — — — 250 300 600 700 900 7 — — — — — — 1210 — — — — 400 800 1000 1350 — — — — 450 900 1150 1650 8 — — — — — — 2100 — — — — — — — 2700 — CAL19-11 (1 x N.O. + 1 x N.C.) CAL18-11 (1 x N.O. + 1 x N.C.) VM19 VM750H VM750V (for same size contactors) BER140-4 BER205-4 TF140DU TA200DU θ ≤ 55 °C EF146 (66...142 A) (54...150 A) θ ≤ 55 °C EF205 5 VM1650H BER370-4 BEM460-30 BEM750-30 EF370 EF460 (150…500 A) EF750 (66...200 A) (63...210 A) (115...380 A) (250…800 A) E1250DU (375…1250 A) Short-circuit protection devices 1SBC101908S0201 MCCB and switch-fuses ABB | 5/81 AF09 ... AF38 3-pole contactors 4 to 18.5 kW AC / DC operated 1SBC101011V0014 Description AF09-30-10 AF09 ... AF38 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltage ranges covering 24...500V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening. –– built-in surge suppression –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. Ordering details 1SBC101001V0014 5 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 25 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage Uc min. … Uc max. use rating 600 V AC hp 5 A 25 AF26-30-00 5.5 28 7.5 30 7.5 28 10 30 11 45 15 45 15 50 20 50 18.5 50 25 50 Auxiliary Type contacts (1) fitted V 50/60 Hz 24...60 V DC - 48...130 48...130 100...250 100...250 250...500 250...500 24...60 - 48...130 48...130 100...250 100...250 250...500 250...500 24...60 - 48...130 48...130 100...250 100...250 250...500 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 (2) 48...130 100...250 250...500 (2) 48...130 100...250 250...500 (2) 48...130 100...250 250...500 (2) (2) (2) 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Order code Weight Pkg (1 pce) AF09-30-10-41 AF09-30-01-41 AF09-30-10-12 AF09-30-01-12 AF09-30-10-13 AF09-30-01-13 AF09-30-10-14 AF09-30-01-14 AF12-30-10-41 AF12-30-01-41 AF12-30-10-12 AF12-30-01-12 AF12-30-10-13 AF12-30-01-13 AF12-30-10-14 AF12-30-01-14 AF16-30-10-41 AF16-30-01-41 AF16-30-10-12 AF16-30-01-12 AF16-30-10-13 AF16-30-01-13 AF16-30-10-14 AF16-30-01-14 AF26-30-00-41 AF26-30-00-12 AF26-30-00-13 AF26-30-00-14 AF30-30-00-41 AF30-30-00-12 AF30-30-00-13 AF30-30-00-14 AF38-30-00-41 AF38-30-00-12 AF38-30-00-13 AF38-30-00-14 kg 0.270 0.270 0.270 0.270 0.270 0.270 0.310 0.310 0.270 0.270 0.270 0.270 0.270 0.270 0.310 0.310 0.270 0.270 0.270 0.270 0.270 0.270 0.310 0.310 0.310 0.310 0.310 0.350 0.310 0.310 0.310 0.350 0.310 0.310 0.310 0.350 1SBL137001R4110 1SBL137001R4101 1SBL137001R1210 1SBL137001R1201 1SBL137001R1310 1SBL137001R1301 1SBL137001R1410 1SBL137001R1401 1SBL157001R4110 1SBL157001R4101 1SBL157001R1210 1SBL157001R1201 1SBL157001R1310 1SBL157001R1301 1SBL157001R1410 1SBL157001R1401 1SBL177001R4110 1SBL177001R4101 1SBL177001R1210 1SBL177001R1201 1SBL177001R1310 1SBL177001R1301 1SBL177001R1410 1SBL177001R1401 1SBL237001R4100 1SBL237001R1200 1SBL237001R1300 1SBL237001R1400 1SBL277001R4100 1SBL277001R1200 1SBL277001R1300 1SBL277001R1400 1SBL297001R4100 1SBL297001R1200 1SBL297001R1300 1SBL297001R1400 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. (2) For 24...60 V 50/60 Hz - 20...60 V DC, use AF..-30-..-11 (see voltage code table). AF..-30-..-11 not suitable for direct control by PLC-output. mm, inches 86 3.39" 70 2.76" 5.5 0.22" 10 0.39" AF09, AF12, AF16 5/82 | ABB 5 0.20" AF26, AF30, AF38 35 1.38" 80 3.15" ø 4.2 0.17" 5.5 0.22" 60 2.36" 6 0.24" 3.15" 60802.36" 35 mm EN/IEC 60715 80 3.15" 6 0.24" 5.5 0.22" 2x M4 8-32 UNC 5.5 0.22" 10 0.39" 1SBC101371S0201 - Rev. B 35 1.38" 45 1.77" ø 4.2 0.17" 71 2.80" 35 mm EN/IEC 60715 77 3.03" 45 1.77" 5 0.20" Main dimensions 5 0.20" AF09Z ... AF38Z 3-pole contactors 4 to 18.5 kW AC / DC operated - low consumption 1SBC101011V0014 Description AF09Z-30-10 AF09Z ... AF38Z contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltage ranges covering 24...250 V 50/60 Hz and 12...250 V DC -- can manage large control voltage variations -- allow direct control by PLC-output ≥ 24 V DC 500 mA -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 25 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage Uc min. … Uc max. use rating 600 V AC hp 5 A 25 V 50/60 Hz V DC 12...20 AF26Z-30-00 5.5 28 7.5 30 7.5 28 10 30 11 45 15 45 15 50 20 50 18.5 50 25 50 24...60 20...60 48...130 48...130 100...250 100...250 - 12...20 24...60 20...60 48...130 48...130 100...250 100...250 - 12...20 24...60 20...60 48...130 48...130 100...250 100...250 24...60 48...130 100...250 24...60 48...130 100...250 24...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 Auxiliary Type contacts (1) fitted 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Order code Weight 5 Pkg (1 pce) AF09Z-30-10-20 AF09Z-30-01-20 AF09Z-30-10-21 AF09Z-30-01-21 AF09Z-30-10-22 AF09Z-30-01-22 AF09Z-30-10-23 AF09Z-30-01-23 AF12Z-30-10-20 AF12Z-30-01-20 AF12Z-30-10-21 AF12Z-30-01-21 AF12Z-30-10-22 AF12Z-30-01-22 AF12Z-30-10-23 AF12Z-30-01-23 AF16Z-30-10-20 AF16Z-30-01-20 AF16Z-30-10-21 AF16Z-30-01-21 AF16Z-30-10-22 AF16Z-30-01-22 AF16Z-30-10-23 AF16Z-30-01-23 AF26Z-30-00-20 AF26Z-30-00-21 AF26Z-30-00-22 AF26Z-30-00-23 AF30Z-30-00-20 AF30Z-30-00-21 AF30Z-30-00-22 AF30Z-30-00-23 AF38Z-30-00-20 AF38Z-30-00-21 AF38Z-30-00-22 AF38Z-30-00-23 kg 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.350 0.350 0.350 0.350 0.350 0.350 0.350 0.350 0.350 0.350 0.350 0.350 1SBL136001R2010 1SBL136001R2001 1SBL136001R2110 1SBL136001R2101 1SBL136001R2210 1SBL136001R2201 1SBL136001R2310 1SBL136001R2301 1SBL156001R2010 1SBL156001R2001 1SBL156001R2110 1SBL156001R2101 1SBL156001R2210 1SBL156001R2201 1SBL156001R2310 1SBL156001R2301 1SBL176001R2010 1SBL176001R2001 1SBL176001R2110 1SBL176001R2101 1SBL176001R2210 1SBL176001R2201 1SBL176001R2310 1SBL176001R2301 1SBL236001R2000 1SBL236001R2100 1SBL236001R2200 1SBL236001R2300 1SBL276001R2000 1SBL276001R2100 1SBL276001R2200 1SBL276001R2300 1SBL296001R2000 1SBL296001R2100 1SBL296001R2200 1SBL296001R2300 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. Note: Only AF..Z contactors with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole. mm, inches 86 3.39" 70 2.76" 5.5 0.22" 10 0.39" AF09Z, AF12Z, AF16Z 5 0.20" 35 1.3 80 3.15" ø 4.2 0 5.5 0.22" 60 2.36" 6 0.24" 35 mm EN/IEC 60715 80 3.15" 6 0.24" 5.5 0.22" 2x M4 8-32 UNC 5.5 0.22" 10 0.39" AF26Z, AF30Z, AF38Z ABB | 5/83 1SBC101372S0201 - Rev. B 35 1.38" 45 1.77" ø 4.2 0.17" 71 2.80" 35 mm EN/IEC 60715 77 3.03" 45 1.77" 5 0.20" Main dimensions 3.15" 60802.36" 1SBC101001V0014 Ordering details 5 0 AF40 ... AF96 3-pole contactors 18.5 to 45 kW AC / DC operated Description 1SBC101014V0014 AF40 ... AF96 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltage ranges covering 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening. –– built-in surge suppression –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. AF40-30-00 Ordering details IEC 5 1SBC101016V0014 Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 18.5 70 UL / CSA 3-phase motor rating 480 V Rated control circuit General voltage Uc min. … Uc max. use rating 600 V AC hp 30 A 60 22 100 40 80 30 105 50 90 37 125 60 105 45 130 60 115 V 50/60 Hz 24...60 24...60 48...130 100...250 250...500 24...60 24...60 48...130 100...250 250...500 24...60 24...60 48...130 100...250 250...500 24...60 24...60 48...130 100...250 250...500 24...60 24...60 48...130 100...250 250...500 AF80-30-00 Auxiliary Type contacts (1) fitted V DC 20...60 (2) 48...130 100...250 250...500 20...60 (2) 48...130 100...250 250...500 20...60 (2) 48...130 100...250 250...500 20...60 (2) 48...130 100...250 250...500 20...60 (2) 48...130 100...250 250...500 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Order code Weight Pkg (1 pce) AF40-30-00-41 AF40-30-00-11 AF40-30-00-12 AF40-30-00-13 AF40-30-00-14 AF52-30-00-41 AF52-30-00-11 AF52-30-00-12 AF52-30-00-13 AF52-30-00-14 AF65-30-00-41 AF65-30-00-11 AF65-30-00-12 AF65-30-00-13 AF65-30-00-14 AF80-30-00-41 AF80-30-00-11 AF80-30-00-12 AF80-30-00-13 AF80-30-00-14 AF96-30-00-41 AF96-30-00-11 AF96-30-00-12 AF96-30-00-13 AF96-30-00-14 1SBL347001R4100 1SBL347001R1100 1SBL347001R1200 1SBL347001R1300 1SBL347001R1400 1SBL367001R4100 1SBL367001R1100 1SBL367001R1200 1SBL367001R1300 1SBL367001R1400 1SBL387001R4100 1SBL387001R1100 1SBL387001R1200 1SBL387001R1300 1SBL387001R1400 1SBL397001R4100 1SBL397001R1100 1SBL397001R1200 1SBL397001R1300 1SBL397001R1400 1SBL407001R4100 1SBL407001R1100 1SBL407001R1200 1SBL407001R1300 1SBL407001R1400 kg 0.970 0.970 0.970 0.950 0.950 0.970 0.970 0.970 0.950 0.950 0.970 0.970 0.970 0.950 0.950 1.220 1.220 1.220 1.170 1.170 1.220 1.220 1.220 1.170 1.170 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. (2) AF..-30-..-11 not suitable for direct control by PLC-output. mm, inches 111 111 4.37"4.37" 5/84 | ABB 7 0.28" 7 0.28" 35 x 15 mm EN/IEC 60715 35 x 15 mm EN/IEC 60715 6 0.24" 6 0.24" 119.5 4.70" 119.5 4.70" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 5.5 0.22" 5.5 0.22" 10 0.39" 10 0.39" AF40, AF52, AF65 116 4.57" 116 4.57" 70 2.76" 70 2.76" 7 0.28" 7 0.28" 6 0.24" 119.5 4.70" 119.5 4.70" 6 0.24" 55 2.17" 55 2.17" 5.5 0.22" 5.5 0.22" 1SBC101740S0201 - Rev. A Main dimensions 10 0.39" 10 0.39" AF80, AF96 N1 5 ABB | 5/85 AF09 ... AF96 3-pole contactors Main accessories Contactor and main accessories (other accessories available) AF09 ... AF65 VEM4 mechanical and electrical interlock set including: – VM4 mechanical interlock unit with 2 fixing clips – VE4 electrical interlock block with A2-A2 connection AF contactor (without top mounted coil terminal block) AF09 ... AF96 AF contactor CAT4-11 2-pole auxiliary contact and A1/A2 coil terminal block Fixing clips AF contactor BX4-CA Protective cover 5 TEF4 Electronic timer VM A2 A2 BX4-CA Protective cover CA4 4-pole auxiliary contact block CAL4-11 2-pole auxiliary contact block AF09 ... AF38 BX4-CA Protective cover CA4, CC4 1-pole auxiliary contact block BX4 Protective cover CA4, CC4 1-pole auxiliary contact block TF EF Overload relay VE4 CAL4-11 2-pole auxiliary contact block CA4, CC4 1-pole auxiliary contact block TF42 EF Overload relay Main accessory fitting details Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor types Built-in Front-mounted accessories auxiliary Auxiliary contact blocks contacts Main poles Electronic timer 1-pole CA4 1-pole CC4 2-pole CAT4-11 4-pole CA4 TEF4 Electrical and mechanical interlock set Side-mounted accessories Auxiliary contact blocks (between 2 contactors) Left side VEM4 2-pole CAL4-11 Right side Max. N.C. built-in and add-on N.C. auxiliary contacts: 4 N.C. max. on positions 1, 2, 3, 4 and 3 N.C. max. on positions 1 ±30°, 5 AF09 ... AF16 AF09 ... AF16 AF26 ... AF38 3 3 3 0 0 0 0 1 0 1 0 0 AF40 ... AF65 AF80, AF96 3 3 0 0 0 0 0 0 4 max. 2 max. 3 max. or 1 or 1 – or 1 – – or 1 or 1 – – – + 1 + 1 + 1 + 1 – + 1 or 1 + 1 + 1 + 1 + 1 Max. add-on N.C. auxiliary contacts: 6 N.C. max. on positions 1, 1 ±30°, 2, 3, 4, 5 4 max. 4 max. or 1 – or 1 or 1 or 1 or 1 – – Contactor types AF09 ... AF38 AF26 ... AF38 AF40 ... AF65 AF80, AF96 Thermal overload relays TF42 (0.10...38 A) TF42 (0.10...38 A) TF65 (22...67 A) TF96 (40...96 A) Electronic overload relays EF19 (0.10...19 A) EF45 (9...45 A) EF65 (20...70 A) EF96 (36...100 A) The addition of an overload relay on the contactor does not prevent fitting of many other accessories as shown above. (1) Direct mounting - No kit required. 5/86 | ABB 1SBC101748S0201 - Rev. A Overload relays fitting details (1) AF09 ... AF96 3-pole contactors Main accessories 1SBC100001V0014 Ordering details (1) 1SBC100007V0014 For contactors CA4-10 Auxiliary contacts Type Order code Pkg qty Weight (1 pce) kg Front-mounted instantaneous auxiliary contact blocks AF09 ... AF96 1 0 – – CA4-10 1 0 – – CA4-10-T 0 1 – – CA4-01 0 1 – – CA4-01-T AF09 ... AF16..-30-10 2 2 – – CA4-22M AF26 ... AF96..-30-00 2 2 – – CA4-22E AF09 ... AF16..-30-01 2 2 – – CA4-22U 1SBC100006V0014 CAL4-11 1SBC100002V0014 CA4-22E CAT4-11E 1SBN010110R1010 1SBN010110T1010 1SBN010110R1001 1SBN010110T1001 1SBN010140R1122 1SBN010140R1022 1SBN010140R1322 1 10 1 10 1 1 1 0.014 0.014 0.014 0.014 0.055 0.055 0.055 Front-mounted auxiliary contact blocks with N.O. leading contact and N.C. lagging contact AF09 ... AF96 – – 1 0 CC4-10 1SBN010111R1010 1 – – 0 1 CC4-01 1SBN010111R1001 1 0.014 0.014 Side-mounted instantaneous auxiliary contact blocks AF09 ... AF96 1 1 – – CAL4-11 1 1 – – CAL4-11-T 1 10 0.040 0.040 1 1 1 0.040 0.040 0.040 1SBN030105T1000 1SBN033405T1000 10 10 0.005 0.006 1SBN030111R1000 1 0.035 1SBN010120R1011 1SBN010120T1011 Front-mounted instantaneous auxiliary contact and A1/A2 coil terminal blocks AF09 ... AF16..-30-10 1 1 – – CAT4-11M 1SBN010151R1111 AF26 ... AF65..-30-00 1 1 – – CAT4-11E 1SBN010151R1011 AF09 ... AF16..-30-01 1 1 – – CAT4-11U 1SBN010151R1311 5 Note: CAT4 not suitable for AF..Z contactors with DC control voltage 12...20 V DC. 1SBC100011V0014 Mechanical interlock unit AF09 ... AF38 AF40 ... AF96 Note: VM4 and VM96-4 include 2 fixing clips (BB4) to maintain together both contactors. Mechanical and electrical interlock set AF09 ... AF16 0 2 AF26 ... AF38 VEM4 For contactors KM2 A2 VEM4 Time delay range Delay type Auxiliary Type contacts Order code Pkg qty selected by switch 1SBC100004V0014 Electronic timers AF09 ... AF96 0.1...1 s 1...10 s 10...100 s 1SBC100014V0014 1SBC100016V0014 BEA16-4 Weight (1 pce) kg ON-delay 1 1 TEF4-ON 1SBN020112R1000 1 0.065 OFF-delay 1 1 TEF4-OFF 1SBN020114R1000 1 0.065 BEA16-4 1SBN081306T1000 10 0.025 BEA26-4 1SBN082306T1000 10 0.025 BEA38-4 1SBN082306T2000 10 0.030 Connection sets for reversing contactors AF09 ... AF16 AF26 ... AF38 AF40 ... AF65 AF80 ... AF96 BER16-4 BER38-4 BER65-4 BER96-4 1SBN081311R1000 1SBN082311R1000 1SBN083411R1000 1SBN083911R1000 1 1 1 1 0.045 0.100 0.175 0.250 Connection sets for star-delta starting AF09 ... AF16 With or without VM4 AF26 ... AF38 With or without VM4 AF40 ... AF65 With or without VM96-4 AF80 ... AF96 With or without VM96-4 BEY16-4 BEY38-4 BEY65-4 BEY96-4 1SBN081313R2000 1SBN082713R2000 1SBN083413R2000 1SBN083913R2000 1 1 1 1 0.050 0.110 0.200 0.250 Note: Rated control circuit voltage Uc 24...240 V 50/60 Hz or DC. TEF4-ON BER16-4 VEM4 Note: - VEM4 includes a VM4 mechanical interlock unit with 2 fixing clips (BB4), a VE4 electrical interlock block. VE4 block must be used with A2-A2 connection to respect the electrical connection diagram. - VEM4 not suitable for AF..Z contactors with DC control voltage 12...20 V DC. 01NC KM1 A2 – – Connecting links with manual motor starters AF09 ... AF16 with MS116-0.16 … MS116-25, MS132-0.16 … MS132-25 AF26 ... AF38 with MS116-0.16 … MS116-16, MS132-0.16 ... MS132-10 with MS116-20 … MS116-32, MS132-12 ... MS132-32 (1) For more information, refer to main catalog "Accessories" section. ABB | 5/87 1SBC101749S0201 01 NC VM4 VM96-4 AF116 ... AF146 3-pole contactors 55 to 75 kW AC / DC operated 1SFC101005V0001 Description AF146-30-00 AF116 ... AF140 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC, AF146 up to 1000 V AC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 1SFC101006V0001 5 AF146-30-00B UL / CSA 3-phase motor rating 480 V Rated control General circuit voltage use Uc min. ... Uc max. rating 600 V AC hp A Auxiliary Type contacts (1) fitted Order code Weight Pkg (1 pce) V 50/60 Hz V DC For connection with built-in cable clamps 55 75 24...60 20...60 160 160 48...130 48...130 100...250 100...250 250...500 250...500 75 100 24...60 20...60 200 200 48...130 48...130 100...250 100...250 250...500 250...500 75 100 24...60 20...60 225 200 48...130 48...130 100...250 100...250 250...500 250...500 With bar connections 55 75 160 160 75 200 100 200 75 225 100 200 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 kg 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF116-30-00-11 AF116-30-00-12 AF116-30-00-13 AF116-30-00-14 AF140-30-00-11 AF140-30-00-12 AF140-30-00-13 AF140-30-00-14 AF146-30-00-11 AF146-30-00-12 AF146-30-00-13 AF146-30-00-14 1SFL427001R1100 1SFL427001R1200 1SFL427001R1300 1SFL427001R1400 1SFL447001R1100 1SFL447001R1200 1SFL447001R1300 1SFL447001R1400 1SFL467001R1100 1SFL467001R1200 1SFL467001R1300 1SFL467001R1400 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF116-30-00B-11 AF116-30-00B-12 AF116-30-00B-13 AF116-30-00B-14 AF140-30-00B-11 AF140-30-00B-12 AF140-30-00B-13 AF140-30-00B-14 AF146-30-00B-11 AF146-30-00B-12 AF146-30-00B-13 AF146-30-00B-14 1SFL427002R1100 1SFL427002R1200 1SFL427002R1300 1SFL427002R1400 1SFL447002R1100 1SFL447002R1200 1SFL447002R1300 1SFL447002R1400 1SFL467002R1100 1SFL467002R1200 1SFL467002R1300 1SFL467002R1400 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. 5/88 | ABB 30 1.18" AF116, AF140, AF146-30-00B 19.5 0.77" 1SFC101088C0201 - Rev. C AF116, AF140, AF146-30-00 D 150 5.91" 150 5.91" 30 1.18" SECTION E-E 126 4.96" 90 3.54" D 19.5 4.96" D D E SECTION E-E 126 4.96" 90 3.54" 55.5 0.22" E mm, inches 55.5 2.18" Main dimensions AF116 ... AF146 3-pole contactors with built-in PLC interface 55 to 75 kW AC / DC operated Description 1SFC101182V0001 AF116 ... AF146 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC, AF146 up to 1000 V AC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...500 V AC and DC), only 2 coils to cover control voltages between 100...500 V 50/60 Hz and 100...250 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF146-30-00 Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL / CSA 3-phase motor rating 480 V Rated control General circuit voltage use Uc min. ... Uc max. rating 600 V AC hp A Auxiliary Type contacts (1) fitted Order code Weight 5 Pkg (1 pce) V 50/60 Hz V DC kg 1SFC101185V0001 For connection with built-in cable clamps AF146-30-00B 55 160 75 160 75 200 100 200 75 225 100 200 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 0 0 0 0 0 0 0 0 0 0 0 0 AF116-30-00-33 AF116-30-00-34 AF140-30-00-33 AF140-30-00-34 AF146-30-00-33 AF146-30-00-34 1SFL427001R3300 1SFL427001R3400 1SFL447001R3300 1SFL447001R3400 1SFL467001R3300 1SFL467001R3400 1.750 1.750 1.750 1.750 1.750 1.750 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 0 0 0 0 0 0 0 0 0 0 0 0 AF116-30-00B-33 AF116-30-00B-34 AF140-30-00B-33 AF140-30-00B-34 AF146-30-00B-33 AF146-30-00B-34 1SFL427002R3300 1SFL427002R3400 1SFL447002R3300 1SFL447002R3400 1SFL467002R3300 1SFL467002R3400 1.500 1.500 1.500 1.500 1.500 1.500 With bar connections 55 160 75 160 75 200 100 200 75 225 100 200 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. AF116 ... AF146 are equipped with low voltage inputs for control, for example by a PLC. Control inputs Main dimensions mm, inches E AF116, AF140, AF146-30-00 19.5 0.77" D 55.5 2.18" 142.5 5.61" 1SFC101164C0201 30 1.18" D 150 5.91" 150 5.91" D 19.5 4.96" D 90 3.54" 142.5 5.61" 90 3.54" 55.5 0.22" E 30 1.18" AF116, AF140, AF146-30-00B ABB | 5/89 AF190 ... AF370 3-pole contactors 90 to 200 kW AC / DC operated Description 1SFC101012V0001 AF190 ... AF370 contactors are mainly used for controlling 3-phase motors and power circuits up to 1000 V AC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF205-30-00 Ordering details 1SFC101017V0001 5 AF370-30-00 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 90 275 UL / CSA 3-phase motor rating 480 V Rated control General circuit voltage use Uc min. ... Uc max. rating 600 V AC hp 125 A 250 110 350 150 300 140 400 200 350 160 500 250 400 200 600 300 520 V 50/60 Hz 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 Auxiliary Type contacts (1) fitted V DC 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF190-30-00-11 AF190-30-00-12 AF190-30-00-13 AF190-30-00-14 AF205-30-00-11 AF205-30-00-12 AF205-30-00-13 AF205-30-00-14 AF265-30-00-11 AF265-30-00-12 AF265-30-00-13 AF265-30-00-14 AF305-30-00-11 AF305-30-00-12 AF305-30-00-13 AF305-30-00-14 AF370-30-00-11 AF370-30-00-12 AF370-30-00-13 AF370-30-00-14 Order code Weight Pkg (1 pce) kg 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 4.605 4.605 4.605 4.605 4.605 4.605 4.605 4.605 4.605 4.605 4.605 4.605 1SFL487002R1100 1SFL487002R1200 1SFL487002R1300 1SFL487002R1400 1SFL527002R1100 1SFL527002R1200 1SFL527002R1300 1SFL527002R1400 1SFL547002R1100 1SFL547002R1200 1SFL547002R1300 1SFL547002R1400 1SFL587002R1100 1SFL587002R1200 1SFL587002R1300 1SFL587002R1400 1SFL607002R1100 1SFL607002R1200 1SFL607002R1300 1SFL607002R1400 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. Main dimensions mm, inches A 180 7.09" ø 10.5 0.41" 35.5 1.40" 5 0.20" 33.4 1.31" 94.7 3.73" 5 0.20" 43.75 1.72" AF265, AF305, AF370 1SFC101089C0201 - Rev. D AF190, AF205 19.5 0.77" 225 8.86" 196 7.72" 35 1.38" 35.5 1.40" 29.5 1.16" ø 8.5 0.33" 83.5 3.29" 105 4.13" 5/90 | ABB 140 5.51" SECTION B-B 152 5.98" B AF190 ... AF370 3-pole contactors with built-in PLC interface 90 to 200 kW AC / DC operated 1SFC101167V0001 Description Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 90 275 UL / CSA 3-phase motor rating 480 V Rated control General circuit voltage use Uc min. ... Uc max. rating 600 V AC hp 125 A 250 110 350 150 300 140 400 200 350 160 500 250 400 200 600 300 520 V 50/60 Hz 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 Auxiliary Type contacts (1) fitted V DC 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF190-30-00-33 AF190-30-00-34 AF205-30-00-33 AF205-30-00-34 AF265-30-00-33 AF265-30-00-34 AF305-30-00-33 AF305-30-00-34 AF370-30-00-33 AF370-30-00-34 Order code Weight 5 Pkg (1 pce) kg 3.000 3.000 3.000 3.000 4.605 4.605 4.605 4.605 4.605 4.605 1SFL487002R3300 1SFL487002R3400 1SFL527002R3300 1SFL527002R3400 1SFL547002R3300 1SFL547002R3400 1SFL587002R3300 1SFL587002R3400 1SFL607002R3300 1SFL607002R3400 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. AF190 ... AF370 are equipped with low voltage inputs for control, for example by a PLC. Control inputs Main dimensions mm, inches A 140 5.51" SECTION B-B 19.5 0.77" 195.5 7.70" ø 10.5 0.41" 35.5 1.40" 5 0.20" 169.5 6.67" B AF190, AF205 33.4 1.31" 225 8.86" 94.7 3.73" 5 0.20" 1SFC101165C0201 35 1.38" 35.5 1.40" 29.5 1.16" ø 8.5 0.33" 83.5 3.29" 105 4.13" 196 7.72" 1SFC101132V0001 AF205-30-00 AF370-30-00 AF190 ... AF370 contactors are mainly used for controlling 3-phase motors and power circuits up to 1000 V AC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 2 coils to cover control voltages between 100...500 V 50/60 Hz and 100...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. 43.75 1.72" AF265, AF305, AF370 ABB | 5/91 AF116 ... AF370 3-pole contactors Main accessories Main accessories (other accessories available) CAL19-11 2-pole auxiliary contact block CAL19-11B 2-pole auxiliary contact block LW Terminal enlargement VM Mechanical interlock 5 AF contactor with bar connections CAL19-11 2-pole auxiliary contact block LT Terminal shroud AF contactor with built-in cable clamps CAL19-11B 2-pole auxiliary contact block TF/TA Thermal overload relay EF Electronic overload relay Main accessory fitting details Contactor types Main poles Available auxiliary contacts Side-mounted accessories Auxiliary contact blocks CAL19-11 AF116 ... AF370 3 0 0 0 2 x CAL19-11 + 2 x CAL19-11B AF116 ... AF370 3 0 0 0 2 x CAL19-11 (1) + 2 x CAL19-11B (1) (1) Total number of auxiliary contact blocks for the two contactors. Mechanical interlock units CAL19-11B (between two contactors) – + VM... (2) (2) Interlock type, according to the contactor ratings (see "Accessories"). Contactor types AF116 ... AF140 AF146 AF190, AF205 AF265 ... AF370 Thermal overload relays TF140DU (66...142 A) – TA200DU (66...200 A) – Electronic overload relays EF146 (54...150 A) EF146 (54...150 A) EF205 (63...210 A) EF370 (115...380 A) The addition of a thermal or electronic overload relay on the contactor does not prevent fitting of many other accessories as shown in "Main accessory fitting details" table. (1) Direct mounting - No kit required. 5/92 | ABB 1SFC101135C0201 Overload relays fitting details (1) AF116 ... AF370 3-pole contactors Main accessories Ordering details (1) For contactors Auxiliary contacts Type Order code Pkg qty Weight (1 pce) 1SFC101071V0001 kg Side-mounted instantaneous auxiliary contact blocks 1 1 CAL19-11 AF116 ... AF370 1 1 CAL19-11B 1SFN010820R1011 1SFN010820R3311 2 2 0.050 0.050 Mechanical interlock unit AF116 ... AF370 AF116 ... AF146 and AF190, AF205 AF190, AF205 and AF265 ... AF370 VM19 VM140/190 VM205/265 1SFN030300R1000 1SFN034403R1000 1SFN035203R1000 1 1 1 0.054 0.088 0.090 LT140-30L LT205-30C LT205-30L LT205-30Y 1SFN124203R1000 1SFN124801R1000 1SFN124803R1000 1SFN124804R1000 2 2 2 1 0.070 0.050 0.220 0.050 LT370-30C LT370-30L LT370-30Y 1SFN125401R1000 1SFN125403R1000 1SFN125404R1000 2 2 1 0.035 0.280 0.075 LT370-30D 1SFN125406R1000 1 0.150 Type Order code Pkg Weight qty (1 pce) kg CAL19-11 1SFC101041V0001 VM19 For contactors bar mm Terminal enlargements AF116 ... AF146 AF190 ... AF205 AF265 ... AF370 6.5 10.5 10.5 13 x 3 17.5 x 5 20 x 5 LW140 LW205 LW370 1SFN074207R1000 1SFN074807R1000 1SFN075407R1000 1 1 1 0.115 0.260 0.340 Terminal extension AF116 ... AF146 AF190 ... AF250 AF265 ... AF370 6.5 8.5 10.5 13 x 3 17.5 x 5 20 x 5 LX140 LX205 LX370 1SFN074210R1000 1SFN074810R1000 1SFN075410R1000 1 1 1 0.072 0.180 0.234 1SFC101049V0001 LT370-30C LX140 Dimensions hole Ø mm 5 (1) For more information, refer to "Accessories" section. 1SFC101134C0201 1SFC101035V0001 Terminal shrouds AF116 ... AF146, with compression lugs AF190, AF205, with cable clamps AF190, AF205, with compression lugs AF190, AF205, with shorting bar or between contactor and TOL/EOL in DOL-starters AF265 ... AF370, with cable clamps AF265 ... AF370, with compression lugs AF265 ... AF370, with shorting bar or between contactor and TOL/EOL in DOL-starters AF265 ... AF370, for use with extending cable clamps, ATK300/2 and OZXB4 ABB | 5/93 AF116 ... AF146 3-pole contactors 55 to 75 kW AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts 1SFC101001V0001 Description AF146-30-11 AF116 ... AF140 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC, AF146 up to 1000 V AC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 1SFC101008V0001 5 AF146-30-11B UL / CSA 3-phase motor rating 480 V Rated control ircuit General voltage Uc min. ... Uc max. use rating 600 V AC hp A Auxiliary Type contacts (1) fitted Order code Weight Pkg (1 pce) V 50/60 Hz V DC For connection with built-in cable clamps 55 75 24...60 20...60 160 160 48...130 48...130 100...250 100...250 250...500 250...500 75 100 24...60 20...60 200 200 48...130 48...130 100...250 100...250 250...500 250...500 75 100 24...60 20...60 225 200 48...130 48...130 100...250 100...250 250...500 250...500 With bar connections 55 75 160 160 75 200 100 200 75 225 100 200 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 kg 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AF116-30-11-11 AF116-30-11-12 AF116-30-11-13 AF116-30-11-14 AF140-30-11-11 AF140-30-11-12 AF140-30-11-13 AF140-30-11-14 AF146-30-11-11 AF146-30-11-12 AF146-30-11-13 AF146-30-11-14 1SFL427001R1111 1SFL427001R1211 1SFL427001R1311 1SFL427001R1411 1SFL447001R1111 1SFL447001R1211 1SFL447001R1311 1SFL447001R1411 1SFL467001R1111 1SFL467001R1211 1SFL467001R1311 1SFL467001R1411 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AF116-30-11B-11 AF116-30-11B-12 AF116-30-11B-13 AF116-30-11B-14 AF140-30-11B-11 AF140-30-11B-12 AF140-30-11B-13 AF140-30-11B-14 AF146-30-11B-11 AF146-30-11B-12 AF146-30-11B-13 AF146-30-11B-14 1SFL427002R1111 1SFL427002R1211 1SFL427002R1311 1SFL427002R1411 1SFL447002R1111 1SFL447002R1211 1SFL447002R1311 1SFL447002R1411 1SFL467002R1111 1SFL467002R1211 1SFL467002R1311 1SFL467002R1411 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. mm, inches 5/94 | ABB D D 30 1.18" AF116, AF140, AF146-30-11B 1SFC101090C0201 - Rev. C 30 1.18" AF116, AF140, AF146-30-11 126 4.96" 19.5 0.77" 150 5.91" D SECTION E-E 90 3.54" 55.5 2.18" D E 10 0.39" 150 5.91" SECTION E-E 126 4.96" 90 3.54" 55.5 0.22" 10 0.39" E 19.5 4.96" Main dimensions AF116 ... AF146 3-pole contactors with built-in PLC interface 55 to 75 kW AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts 1SFC101083V0001 Description AF146-30-11 AF116 ... AF140 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC, AF146 up to 1000 V AC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 2 coils to cover control voltages between 100...500 V 50/60 Hz and 100...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL / CSA 3-phase motor rating 480 V Rated control General circuit voltage use Uc min. ... Uc max. rating 600 V AC hp A Auxiliary Type contacts (1) fitted Order code Weight 5 Pkg (1 pce) V 50/60 Hz V DC kg 160 75 160 75 200 100 200 75 225 100 200 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 1 1 1 1 1 1 1 1 1 1 1 1 AF116-30-11-33 AF116-30-11-34 AF140-30-11-33 AF140-30-11-34 AF146-30-11-33 AF146-30-11-34 1SFL427001R3311 1SFL427001R3411 1SFL447001R3311 1SFL447001R3411 1SFL467001R3311 1SFL467001R3411 1.750 1.750 1.750 1.750 1.750 1.750 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 1 1 1 1 1 1 1 1 1 1 1 1 AF116-30-11B-33 AF116-30-11B-34 AF140-30-11B-33 AF140-30-11B-34 AF146-30-11B-33 AF146-30-11B-34 1SFL427002R3311 1SFL427002R3411 1SFL447002R3311 1SFL447002R3411 1SFL467002R3311 1SFL4670023R411 1.500 1.500 1.500 1.500 1.500 1.500 With bar connections 55 160 75 160 75 200 100 200 75 225 100 200 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. AF116 ... AF146 are equipped with low voltage inputs for control, for example by a PLC. Control inputs Main dimensions E 30 1.18" AF116, AF140, AF146-30-11 D D 1SFC101166C0201 D 142.5 5.61" 19.5 0.77" D 90 3.54" 10 0.39" 55.5 2.18" 142.5 5.61" 90 3.54" 150 5.91" 10 0.39" mm, inches 19.5 4.96" E 55.5 0.22" AF146-30-11B 55 150 5.91" 1SFC101186V0001 For connection with built-in cable clamps 30 1.18" AF116, AF140, AF146-30-11B ABB | 5/95 AF190 ... AF370 3-pole contactors 90 to 200 kW AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts Description 1SFC101013V0001 AF190 ... AF370 contactors are mainly used for controlling 3-phase motors and power circuits up to 1000 V AC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF205-30-11 Ordering details 1SFC101018V0001 5 AF370-30-11 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 90 275 UL / CSA 3-phase motor rating 480 V Rated control circuit General voltage Uc min. ... Uc max. use rating 600 V AC hp 125 A 250 110 350 150 300 140 400 200 350 160 500 250 400 200 600 300 520 V 50/60 Hz 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 V DC 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 Auxiliary Type contacts (1) fitted 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Order code Weight Pkg (1 pce) AF190-30-11-11 AF190-30-11-12 AF190-30-11-13 AF190-30-11-14 AF205-30-11-11 AF205-30-11-12 AF205-30-11-13 AF205-30-11-14 AF265-30-11-11 AF265-30-11-12 AF265-30-11-13 AF265-30-11-14 AF305-30-11-11 AF305-30-11-12 AF305-30-11-13 AF305-30-11-14 AF370-30-11-11 AF370-30-11-12 AF370-30-11-13 AF370-30-11-14 kg 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 4.640 4.640 4.640 4.640 4.640 4.640 4.640 4.640 4.640 4.640 4.640 4.640 1SFL487002R1111 1SFL487002R1211 1SFL487002R1311 1SFL487002R1411 1SFL527002R1111 1SFL527002R1211 1SFL527002R1311 1SFL527002R1411 1SFL547002R1111 1SFL547002R1211 1SFL547002R1311 1SFL547002R1411 1SFL587002R1111 1SFL587002R1211 1SFL587002R1311 1SFL587002R1411 1SFL607002R1111 1SFL607002R1211 1SFL607002R1311 1SFL607002R1411 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. Main dimensions mm, inches A SECTION B-B 180 7.09" ø 10.5 0.41" 35.5 1.40" 5 0.20" 33.4 1.31" 94.7 3.73" 5 0.20" 43.75 1.72" AF265, AF305, AF370 1SFC101091C0201 - Rev. D 225 8.86" 196 7.72" 35 1.38" 35.5 1.40" 29.5 1.16" ø 8.5 0.33" 83.5 3.29" 105 4.13" AF190, AF205 5/96 | ABB 140 5.51" 19.5 0.77" 152 5.98" B 10 0.39" 10 0.39" AF190 ... AF370 3-pole contactors with built-in PLC interface 90 to 200 kW AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts Description 1SFC101165V0001 AF190 ... AF370 contactors are mainly used for controlling 3-phase motors and power circuits up to 1000 V AC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 2 coils to cover control voltages between 100...500 V 50/60 Hz and 100...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF205-30-11 UL / CSA 3-phase motor rating 480 V Rated control General circuit voltage use Uc min. ... Uc max. rating 600 V AC hp 125 A 250 110 350 150 300 140 400 200 350 160 500 250 400 200 600 300 520 V 50/60 Hz 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 V DC 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 Auxiliary Type contacts (1) fitted 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Order code Weight 5 Pkg (1 pce) AF190-30-11-33 AF190-30-11-34 AF205-30-11-33 AF205-30-11-34 AF265-30-11-33 AF265-30-11-34 AF305-30-11-33 AF305-30-11-34 AF370-30-11-33 AF370-30-11-34 kg 3.000 3.000 3.000 3.000 4.640 4.640 4.640 4.640 4.640 4.640 1SFL487002R3311 1SFL487002R3411 1SFL527002R3311 1SFL527002R3411 1SFL547002R3311 1SFL547002R3411 1SFL587002R3311 1SFL587002R3411 1SFL607002R3311 1SFL607002R3411 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. AF190 ... AF370 are equipped with low voltage inputs for control, for example by a PLC. Control inputs Main dimensions mm, inches A SECTION B-B 140 5.51" 19.5 0.77" 195.5 7.70" ø 10.5 0.41" 35.5 1.40" 5 0.20" 5 0.20" 35 1.38" AF190, AF205 1SFC101167C0201 225 8.86" 35.5 1.40" 33.4 1.31" ø 8.5 0.33" 94.7 3.73" 105 4.13" 29.5 1.16" 10 0.39" 10 0.39" 169.5 6.67" B 83.5 3.29" AF370-30-11 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 90 275 196 7.72" 1SFC101133V0001 Ordering details 43.75 1.72" AF265, AF305, AF370 ABB | 5/97 AF116 ... AF370 3-pole contactors with 1 N.O. + 1 N.C. auxiliary contacts Main accessories Main accessories (other accessories available) CAL19-11B 2-pole auxiliary contact block LW Terminal enlargement VM Mechanical interlock 5 AF contactor with bar connections LT Terminal shroud CAL19-11B 2-pole auxiliary contact block AF contactor with built-in cable clamps TF/TA Thermal overload relay EF Electronic overload relay Main accessory fitting details Contactor types Main poles Available auxiliary contacts Side-mounted accessories Auxiliary contact blocks CAL19-11 AF116 ... AF370 3 0 1 1 1 x CAL19-11 + 2 x CAL19-11B AF116 ... AF370 3 0 1 1 – + 2 x CAL19-11B (1) (1) Total number of auxiliary contact blocks for the two contactors. Mechanical interlock units CAL19-11B (between two contactors) – + VM... (2) (2) Interlock type, according to the contactor ratings (see "Accessories"). Contactor types AF116 ... AF140 AF146 AF190, AF205 AF265 ... AF370 Thermal overload relays TF140DU (66...142 A) – TA200DU (66...200 A) – Electronic overload relays EF146 (54...150 A) EF146 (54...150 A) EF205 (63...210 A) EF370 (115...380 A) The addition of a thermal or electronic overload relay on the contactor does not prevent fitting of many other accessories as shown in "Main accessory fitting details" table. (1) Direct mounting - No kit required. 5/98 | ABB 1SFC101132C0201 Overload relays fitting details (1) AF116 ... AF370 3-pole contactors with 1 N.O. + 1 N.C. auxiliary contacts Main accessories Ordering details (1) For contactors Auxiliary contacts Type Order code Pkg qty Weight (1 pce) 1SFC101071V0001 kg Side-mounted instantaneous auxiliary contact blocks AF116 ... AF370 1 1 CAL19-11 1 1 CAL19-11B 1SFN010820R1011 1SFN010820R3311 2 2 0.050 0.050 Mechanical interlock unit AF116 ... AF370 AF116 ... AF146 and AF190, AF205 AF190, AF205 and AF265 ... AF370 VM19 VM140/190 VM205/265 1SFN030300R1000 1SFN034403R1000 1SFN035203R1000 1 1 1 0.054 0.088 0.090 LT140-30L LT205-30C LT205-30L LT205-30Y 1SFN124203R1000 1SFN124801R1000 1SFN124803R1000 1SFN124804R1000 2 2 2 1 0.070 0.050 0.220 0.050 LT370-30C LT370-30L LT370-30Y 1SFN125401R1000 1SFN125403R1000 1SFN125404R1000 2 2 1 0.035 0.280 0.075 LT370-30D 1SFN125406R1000 1 0.150 Type Order code Pkg Weight qty (1 pce) kg CAL19-11 1SFC101041V0001 VM19 For contactors bar mm Terminal enlargements AF116...AF146 AF190...AF205 AF265...AF370 6.5 10.5 10.5 13 x 3 17.5 x 5 20 x 5 LW140 LW205 LW370 1SFN074207R1000 1SFN074807R1000 1SFN075407R1000 1 1 1 0.115 0.260 0.340 Terminal extension AF116...AF146 AF190...AF250 AF265...AF370 6.5 8.5 10.5 13 x 3 17.5 x 5 20 x 5 LX140 LX205 LX370 1SFN074210R1000 1SFN074810R1000 1SFN075410R1000 1 1 1 0.072 0.180 0.234 1SFC101049V0001 LT370-30C LX140 Dimensions hole Ø mm 5 (1) For more information, refer to main catalog "Accessories" section. 1SFC101138C0201 1SFC101035V0001 Terminal shrouds AF116 ... AF146, with compression lugs AF190, AF205, with cable clamps AF190, AF205, with compression lugs AF190, AF205, with shorting bar or between contactor and TOL/EOL in DOL-starters AF265 ... AF370, with cable clamps AF265 ... AF370, with compression lugs AF265 ... AF370, with shorting bar or between contactor and TOL/EOL in DOL-starters AF265 ... AF370, for use with extending cable clamps, ATK300/2 and OZXB4 ABB | 5/99 AF400 ... AF750 3-pole contactors 200 to 400 kW AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts Description 1SFC101022V0001 AF400 ... AF750 contactors are mainly used for controlling 3-phase motors and power circuits up to 1000 V AC or 600 V DC (2). These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 48...500 V 50/60 Hz and 24...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltages sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF460-30-11 Ordering details 1SFC101025V0001 5 AF750-30-11 IEC Rated operational power current θ ≤ 40 °C 400 V 690 V AC-3 AC-1 kW A 200 600 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage Uc min. ... Uc max. use rating 600 V AC hp 350 A 550 250 700 400 650 315 800 500 750 400 1050 600 900 V 50/60 Hz 48…130 100…250 250…500 48…130 100…250 250…500 48…130 100…250 250…500 48…130 100…250 250…500 Auxiliary Type contacts fitted V DC 24…60 48…130 100…250 250…500 24…60 48…130 100…250 250…500 24…60 48…130 100…250 250…500 24…60 48…130 100…250 250…500 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Order code Weight Pkg (1 pce) AF400-30-11 AF400-30-11 AF400-30-11 AF400-30-11 AF460-30-11 AF460-30-11 AF460-30-11 AF460-30-11 AF580-30-11 AF580-30-11 AF580-30-11 AF580-30-11 AF750-30-11 AF750-30-11 AF750-30-11 AF750-30-11 kg 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 15.000 15.000 15.000 15.000 15.000 15.000 15.000 15.000 1SFL577001R6811 (1) 1SFL577001R6911 1SFL577001R7011 1SFL577001R7111 1SFL597001R6811 (1) 1SFL597001R6911 1SFL597001R7011 1SFL597001R7111 1SFL617001R6811 (1) 1SFL617001R6911 1SFL617001R7011 1SFL617001R7111 1SFL637001R6811 (1) 1SFL637001R6911 1SFL637001R7011 1SFL637001R7111 (1) The connection polarities indicated close to the coil terminals must be respected: A1 for the positive pole and A2 for the negative pole. (2) Up to 850 V DC for AF580, AF750. AF400 ... AF750 are equipped with low voltage inputs for control, for example by a PLC. Control inputs mm, inches 242 9.53" 48.5 1.91" 6 0.24" 72 2.83" AF580, AF750 E1633D 1SFC101013C0201 - Rev. A E1627D1 278 10.94" E1626D1 22.5 0.89" ø6.5 0.26" ø12.5 0.49" 40 1.57" 6 0.24" 11.5 0.45" 48.5 1.91" 273 10.75" ø 10.5 0.41" 268 10.55" 63 2.48" AF400, AF460 5/100 | ABB 210 8.27" 216 8.5" ø 6.5 0.26" 11.5 0.45" 22.5 0.89" 25 0.98" 283 11.14" 186 7.32" E1632D Main dimensions AF1250 ... AF2650 3-pole contactors 475 to 560 kW and 1260 to 2650 A AC-1 AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts Description 1SFC101027V0001 AF1250 ... AF2050 contactors are mainly used for controlling power circuits up to 1000 V AC or 850 V DC, AF2650 for controlling power up to 1000 V AC. These contactors are of the block type design with 3 main poles. – control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC) - only 4 coils for AF1250 to cover control voltages between 48...500 V 50/60 Hz and 24...500 V DC - only 1 coil for AF1350 ... AF2650 to cover control voltages between 100...250 V 50/60 Hz and 100...250 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltages sags (SEMI F47 conditions of use on request). – built-in surge suppression – add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF1250-30-11 UL/CSA 3-phase motor rating 480 V 475 560 - 800 900 - 1350 1650 2050 2650 hp - Rated control circuit voltage Uc (1) General use rating 600 V AC (2) A V 50/60 Hz 1210 48…130 100…250 250…500 1350 100…250 1650 100…250 2100 100…250 2700 100...250 Auxiliary Type contacts fitted V DC 24…60 48…130 100…250 250…500 100…250 100…250 100…250 100...250 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Order code 5 Weight Pkg (1 pce) AF1250-30-11 AF1250-30-11 AF1250-30-11 AF1250-30-11 AF1350-30-11 AF1650-30-11 AF2050-30-11 AF2650-30-11 kg 16.000 16.000 16.000 16.000 34.000 35.000 35.000 45.000 1SFL647001R6811 (1) 1SFL647001R6911 1SFL647001R7011 1SFL647001R7111 1SFL657001R7011 1SFL677001R7011 1SFL707001R7011 1SFL667001R7011 (1) The connection polarities indicated close to the coil terminals must be respected: A1 for the positive pole and A2 for the negative pole. (2) AF2650: Maximum operational voltage = 1000 V according to UL / CSA. AF1250 ... AF2650 are equipped with low voltage inputs for control, for example by a PLC Control inputs AF1350, AF1650, AF2050 392 mm / 15.43" 47 mm / 1.85" 10 mm / 0.39" A B C mm, inches 40 1.57" 27 ø 13 0.51" 1.06" 13 0.51" 30 1.18" 10 0.39" ø 7 0.28" 13 0.51" AF1350, AF1650 AF1250 40 1.57" 10 0.39" AF2650 244 9.61" 136 5.35" 312 12.3" A 1SFC101125F0001 C 80 3.15" 101 3.98" 136 5.35" ø 9 0.35" 438 17.24" AF1350, AF1650, AF2050, AF2650 ABB | 5/101 1SFC101094C0201 - Rev. A 72 2.83" 210 8.27" 1SFC101124F0001 72 2.83" 8 0.31" 17 0.67" B 249 9.8" 263 10.35" ø7 0.28" 46.5 18.3" 40 1.57" 30 1.18" AF2050 136 5.35" 242 9.53" ø 13 0.51" 17 0.67" 40 72 2.83" 40 1.57" 17 0.67" 50 1.97" 27 AF2650 422 mm / 16.61" 53 mm / 2.09" 25 mm / 0.98" 1.57" Main dimensions 313 12.32" AF2650-30-11 IEC Rated operational power current θ ≤ 40 °C 400 V 690 V AC-3 AC-1 kW A 1260 344 13.54" 1SFC101031V0001 Ordering details AF400 ... AF2650 3-pole contactors with 1 N.O. + 1 N.C. auxiliary contacts Main accessories Main accessories (other accessories available) LW Terminal enlargement LZ Connector terminal CAL18-11B 2-pole auxiliary contact block 5 VM Mechanical interlock LT Terminal shroud AF contactor CAL18-11B 2-pole auxiliary contact block Main accessory fitting details Contactor types Main poles Available auxiliary contacts Side-mounted accessories Auxiliary contact blocks Mechanical interlock units CAL18-11B (3) CAL18-11 (between two contactors) Contactors + auxiliary contact blocks AF400 ... AF2650 3 0 1 1 1 x CAL18-11 + 2 x CAL18-11B – Contactors with mechanical interlocking + auxiliary contact blocks AF400 ... AF2650 3 0 1 1 2 x CAL18-11 (1) + 4 x CAL18-11B (1) + VM...H (2) Overload relays fitting details Contactor types AF400, AF460 AF580, AF750 AF1350, AF1650 Thermal overload relays – – – Electronic overload relays EF460 (150...500 A) (4) EF750 (250...800 A) (4) E1250DU (375...1250 A) (4) The addition of a thermal or electronic overload relay on the contactor does not prevent fitting of many other accessories as shown in "Main accessory fitting details" table. (4) Mounting kit required (see "Motor protection"). 5/102 | ABB 1SFC101126C0201 - Rev. A (1) Total number of auxiliary contact blocks for the two contactors. (2) Interlock type, according to the contactor ratings (see "Accessories"). (3) The CEL18-.. auxiliary contact blocks can replace the CAL18-11 and CAL18-11B. Though, no auxiliary contact block can be mounted outside the CEL18-.. AF400 ... AF2650 3-pole contactors with 1 N.O. + 1 N.C. auxiliary contacts Main accessories Ordering details (1) Auxiliary contacts 1SFC101082V0001 For contactors Type Order code Pkg qty Weight (1 pce) kg 1SFC101089V0001 VM750H Side-mounted instantaneous auxiliary contact blocks AF400 ... AF2650 1 1 CAL18-11 1 1 CAL18-11B 1SFN010720R1011 1SFN010720R3311 2 2 0.050 0.050 Mechanical interlock unit AF400 ... AF1250 AF1350 ... AF2650 VM750H VM1650H 1SFN035700R1000 1SFN036503R1000 1 1 0.200 6.000 Terminal shrouds AF400, AF460 with connectors AF400, AF460 with lugs AF580 ... AF750 with connectors AF580 ... AF750 with lugs LT460-AC LT460-AL LT750-AC LT750-AL 1SFN125701R1000 1SFN125703R1000 1SFN126101R1000 1SFN126103R1000 2 2 2 2 0.100 0.800 0.120 0.825 Type Order code Pkg Weight qty (1 pce) kg For contactors Dimensions hole Ø mm bar mm Terminal enlargements AF400, AF460 AF580, AF750 AF1250 10.5 13 13 25 x 5 40 x 6 50 x 10 LW460 LW750 LW1250 1SFN075707R1000 1SFN076107R1000 1SFN076407R1000 1 1 1 0.730 1.230 2.000 Terminal extension AF400, AF460 AF580, AF750 10.5 13 25 x 5 40 x 6 LX460 LX750 1SFN075710R1000 1SFN076110R1000 1 1 0.500 0.850 LT460-AC 5 (1) For more information, refer to main catalog "Accessories" section. 1SFC101128C0201 1SFC101084V0001 CAL18-11 ABB | 5/103 AF09 ... AF38 2-stack 3-pole contactors 4 to 18.5 kW AC / DC operated 1SBC101002V0014 Description AF09-30-22 AF09 ... AF38 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with 3 main poles (1st stack): –– 2nd stack with permanently fixed auxiliary contact block. The built-in auxiliary contact elements are mechanically linked (side-marked symbol) and the N.C. auxiliary contacts are mirror contacts –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltage ranges covering 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening. –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details 1SBC101003V0014 5 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 25 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage use Uc min. … Uc max. rating 600 V AC hp 5 A 25 5.5 28 7.5 28 7.5 30 10 30 11 45 15 45 1SBC101004V0014 AF26-30-11 AF26-30-22 15 50 18.5 50 20 50 25 50 Auxiliary Type contacts (1) fitted V 50/60 Hz 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 V DC (2) 48...130 100...250 250...500 (2) 48...130 100...250 250...500 (2) 48...130 100...250 250...500 (2) 48...130 48...130 100...250 100...250 250...500 250...500 24...60 - 48...130 48...130 100...250 100...250 250...500 250...500 24...60 - 48...130 48...130 100...250 100...250 250...500 250...500 (2) (2) 2 2 2 2 2 2 2 2 2 2 2 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 Order code Weight Pkg (1 pce) AF09-30-22-41 AF09-30-22-12 AF09-30-22-13 AF09-30-22-14 AF12-30-22-41 AF12-30-22-12 AF12-30-22-13 AF12-30-22-14 AF16-30-22-41 AF16-30-22-12 AF16-30-22-13 AF16-30-22-14 AF26-30-11-41 AF26-30-22-41 AF26-30-11-12 AF26-30-22-12 AF26-30-11-13 AF26-30-22-13 AF26-30-11-14 AF26-30-22-14 AF30-30-11-41 AF30-30-22-41 AF30-30-11-12 AF30-30-22-12 AF30-30-11-13 AF30-30-22-13 AF30-30-11-14 AF30-30-22-14 AF38-30-11-41 AF38-30-22-41 AF38-30-11-12 AF38-30-22-12 AF38-30-11-13 AF38-30-22-13 AF38-30-11-14 AF38-30-22-14 1SBL137001R4122 1SBL137001R1222 1SBL137001R1322 1SBL137001R1422 1SBL157001R4122 1SBL157001R1222 1SBL157001R1322 1SBL157001R1422 1SBL177001R4122 1SBL177001R1222 1SBL177001R1322 1SBL177001R1422 1SBL237001R4111 1SBL237001R4122 1SBL237001R1211 1SBL237001R1222 1SBL237001R1311 1SBL237001R1322 1SBL237001R1411 1SBL237001R1422 1SBL277001R4111 1SBL277001R4122 1SBL277001R1211 1SBL277001R1222 1SBL277001R1311 1SBL277001R1322 1SBL277001R1411 1SBL277001R1422 1SBL297001R4111 1SBL297001R4122 1SBL297001R1211 1SBL297001R1222 1SBL297001R1311 1SBL297001R1322 1SBL297001R1411 1SBL297001R1422 kg 0.320 0.320 0.320 0.360 0.320 0.320 0.320 0.360 0.320 0.320 0.320 0.360 0.350 0.360 0.350 0.360 0.350 0.360 0.390 0.400 0.350 0.360 0.350 0.360 0.350 0.360 0.390 0.400 0.350 0.360 0.350 0.360 0.350 0.360 0.390 0.400 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. (2) For 24...60 V 50/60 Hz - 20...60 V DC, use AF..-30-..-11 (see voltage code table). AF..-30-..-11 not suitable for direct control by PLC-output. 110.5 4.35" 45 35 1.77" 1.38" AF09, AF12, AF16 5/104 | ABB 60 2.36" 6 0.24" 80 3.15" 5.5 0.22" ø 4.2 0.17" 43 1.69" 35 mm EN/IEC 60715 80 3.15" 6 0.24" 5.5 0.22" 119.5 4.70" AF..-30-11 111.5 4.39" 80 3.15" 2x M4 8-32 UNC5.5 0.22" 70 2.76" 10 0.39" 5 0.20" AF26, AF30, AF38 5 0.20" 35 mm EN/IEC 60715 71 2.80" 45 1.77" AF..-30-22 5.5 0.22" 10 0.39" 1SBC101373S0201 - Rev. B mm, inches 43 1.69" Main dimensions AF09Z ... AF38Z 2-stack 3-pole contactors 4 to 18.5 kW AC / DC operated - Low consumption 1SBC101002V0014 Description AF09Z-30-22 AF09Z ... AF38Z contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with 3 main poles (1st stack): –– 2nd stack with permanently fixed auxiliary contact block. The built-in auxiliary contact elements are mechanically linked (side-marked symbol) and the N.C. auxiliary contacts are mirror contacts –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltage ranges covering 24...250 V 50/60 Hz and 12...250 V DC -- can manage large control voltage variations, allow direct control by PLC-output ≥ 24 V DC 500 mA, reduced panel energy consumption, very distinct closing and opening, -- can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage use Uc min. … Uc max. rating 600 V AC hp 5 A 25 5.5 28 7.5 28 7.5 30 10 30 11 45 15 45 1SBC101004V0014 15 50 18.5 50 20 50 25 50 V 50/60 Hz 24...60 48...130 100...250 24...60 48...130 100...250 24...60 48...130 100...250 - V DC 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 24...60 20...60 48...130 48...130 100...250 100...250 - 12...20 24...60 20...60 48...130 48...130 100...250 100...250 - 12...20 24...60 20...60 48...130 48...130 100...250 100...250 2 2 2 2 2 2 2 2 2 2 2 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 Order code Weight 5 Pkg (1 pce) AF09Z-30-22-20 AF09Z-30-22-21 AF09Z-30-22-22 AF09Z-30-22-23 AF12Z-30-22-20 AF12Z-30-22-21 AF12Z-30-22-22 AF12Z-30-22-23 AF16Z-30-22-20 AF16Z-30-22-21 AF16Z-30-22-22 AF16Z-30-22-23 AF26Z-30-11-20 AF26Z-30-22-20 AF26Z-30-11-21 AF26Z-30-22-21 AF26Z-30-11-22 AF26Z-30-22-22 AF26Z-30-11-23 AF26Z-30-22-23 AF30Z-30-11-20 AF30Z-30-22-20 AF30Z-30-11-21 AF30Z-30-22-21 AF30Z-30-11-22 AF30Z-30-22-22 AF30Z-30-11-23 AF30Z-30-22-23 AF38Z-30-11-20 AF38Z-30-22-20 AF38Z-30-11-21 AF38Z-30-22-21 AF38Z-30-11-22 AF38Z-30-22-22 AF38Z-30-11-23 AF38Z-30-22-23 kg 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.390 0.400 0.390 0.400 0.390 0.400 0.390 0.400 0.390 0.400 0.390 0.400 0.390 0.400 0.390 0.400 0.390 0.400 0.390 0.400 0.390 0.400 0.390 0.400 1SBL136001R2022 1SBL136001R2122 1SBL136001R2222 1SBL136001R2322 1SBL156001R2022 1SBL156001R2122 1SBL156001R2222 1SBL156001R2322 1SBL176001R2022 1SBL176001R2122 1SBL176001R2222 1SBL176001R2322 1SBL236001R2011 1SBL236001R2022 1SBL236001R2111 1SBL236001R2122 1SBL236001R2211 1SBL236001R2222 1SBL236001R2311 1SBL236001R2322 1SBL276001R2011 1SBL276001R2022 1SBL276001R2111 1SBL276001R2122 1SBL276001R2211 1SBL276001R2222 1SBL276001R2311 1SBL276001R2322 1SBL296001R2011 1SBL296001R2022 1SBL296001R2111 1SBL296001R2122 1SBL296001R2211 1SBL296001R2222 1SBL296001R2311 1SBL296001R2322 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. Note: Only AF..Z contactors with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole mm, inches 10 0.39" 35 45 1.38" 1.77" AF09Z, AF12Z, AF16Z ø 4.2 0.17" 6 0.24" 5.5 0.22" 70 2.76" 35 mm EN/IEC 60715 6 0.24" 5.5 0.22" 119.5 4.70" AF..-30-11 111.5 4.39" 80 3.15" 2x M4 8-32 UNC 5.5 0.22" 5 0.20" 35 mm EN/IEC 60715 71 2.80" 45 1.77" AF..-30-22 5.5 0.22" 10 0.39" 5 0.20" AF26Z, AF30Z, AF38Z ABB | 5/105 1SBC101374S0201 - Rev. B 110.5 4.35" 43 1.69" Main dimensions 80 3.15" AF26Z-30-22 Auxiliary Type contacts (1) fitted 80 3.15" 60 2.36" AF26Z-30-11 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 25 43 1.69" 1SBC101003V0014 Ordering details AF40 ... AF65 2-stack 3-pole contactors 18.5 to 30 kW AC / DC operated Description 1SBC101005V0014 AF40 ... AF65 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with 3 main poles (1st stack): –– 2nd stack with permanently fixed auxiliary contact block. The built-in auxiliary contact elements are mechanically linked (side-marked symbol) and the N.C. auxiliary contacts are mirror contacts –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltage ranges covering 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening. –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF40-30-11 5 Ordering details 1SBC101006V0014 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 18.5 70 UL / CSA 3-phase motor rating 480 V Rated control circuit General voltage Uc min. … Uc max. use rating 600 V AC hp 30 A 60 AF40-30-22 22 30 100 105 40 80 50 90 Auxiliary Type contacts (1) fitted V 50/60 Hz 24...60 V DC - 24...60 20...60 48...130 48...130 100...250 100...250 250...500 250...500 24...60 - 24...60 20...60 48...130 48...130 100...250 100...250 250...500 250...500 24...60 - 24...60 20...60 48...130 48...130 100...250 100...250 250...500 250...500 (2) (2) (2) 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 Order code Weight Pkg (1 pce) AF40-30-11-41 AF40-30-22-41 AF40-30-11-11 AF40-30-22-11 AF40-30-11-12 AF40-30-22-12 AF40-30-11-13 AF40-30-22-13 AF40-30-11-14 AF40-30-22-14 AF52-30-11-41 AF52-30-22-41 AF52-30-11-11 AF52-30-22-11 AF52-30-11-12 AF52-30-22-12 AF52-30-11-13 AF52-30-22-13 AF52-30-11-14 AF52-30-22-14 AF65-30-11-41 AF65-30-22-41 AF65-30-11-11 AF65-30-22-11 AF65-30-11-12 AF65-30-22-12 AF65-30-11-13 AF65-30-22-13 AF65-30-11-14 AF65-30-22-14 1SBL347001R4111 1SBL347001R4122 1SBL347001R1111 1SBL347001R1122 1SBL347001R1211 1SBL347001R1222 1SBL347001R1311 1SBL347001R1322 1SBL347001R1411 1SBL347001R1422 1SBL367001R4111 1SBL367001R4122 1SBL367001R1111 1SBL367001R1122 1SBL367001R1211 1SBL367001R1222 1SBL367001R1311 1SBL367001R1322 1SBL367001R1411 1SBL367001R1422 1SBL387001R4111 1SBL387001R4122 1SBL387001R1111 1SBL387001R1122 1SBL387001R1211 1SBL387001R1222 1SBL387001R1311 1SBL387001R1322 1SBL387001R1411 1SBL387001R1422 kg 1.010 1.020 1.010 1.020 1.010 1.020 0.990 1.000 0.990 1.000 1.010 1.020 1.010 1.020 1.010 1.020 0.990 1.000 0.990 1.000 1.010 1.020 1.010 1.020 1.010 1.020 0.990 1.000 0.990 1.000 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. (2) AF..-30-..-11 not suitable for direct control by PLC-output. mm, inches 144 144 5.67" 5.67" 111 1114.37" 4.37" 7 70.28" 0.28" 111 111 4.37" 4.37" 5/106 | ABB AF40, AF52, AF65-30-22-.. 43 1.69" 1SBC101741S0201 - Rev. A 6 0.24" 5.5 5.5 0.22" 0.22" 10100.39" 0.39" AF40, AF52, AF65-30-11-.. 10 0.39" 10 0.39" 7 0.28" 7 0.28" 35 mm EN/IEC 60715 119.5 4.70" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 119.5 4.70" 119.5 4.70" 5.5 5.50.22" 0.22" 119.5 4.70" 6 0.24" 6 0.24" 6 0.24" 55 2.17" 55 2.17" 35 mm EN/IEC 60715 55552.17" 2.17" 43 1.69" Main dimensions 12120.47" 0.47" AF80 ... AF96 2-stack 3-pole contactors 37 to 45 kW AC / DC operated 1SBC101017V0014 Description AF80-30-11 AF80 ... AF96 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with 3 main poles (1st stack): –– 2nd stack with permanently fixed auxiliary contact block. The built-in auxiliary contact elements are mechanically linked (side-marked symbol) and the N.C. auxiliary contacts are mirror contacts –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltage ranges covering 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening. –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. 5 Ordering details IEC General use rating 600 V AC A 105 1SBC101007V0014 UL / CSA Rated operational 3-phase power current motor θ ≤ 40 °C rating 480 V 400 V AC-3 AC-1 kW A hp 37 125 60 AF80-30-22 45 130 60 115 Rated control circuit voltage Uc min. … Uc max. Auxiliary Type contacts (1) fitted V 50/60 Hz 24...60 V DC - 24...60 20...60 48...130 48...130 100...250 100...250 250...500 250...500 24...60 - 24...60 20...60 48...130 48...130 100...250 100...250 250...500 250...500 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 (2) (2) 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 Order code Weight Pkg (1 pce) AF80-30-11-41 AF80-30-22-41 AF80-30-11-11 AF80-30-22-11 AF80-30-11-12 AF80-30-22-12 AF80-30-11-13 AF80-30-22-13 AF80-30-11-14 AF80-30-22-14 AF96-30-11-41 AF96-30-22-41 AF96-30-11-11 AF96-30-22-11 AF96-30-11-12 AF96-30-22-12 AF96-30-11-13 AF96-30-22-13 AF96-30-11-14 AF96-30-22-14 kg 1.260 1.270 1.260 1.270 1.260 1.270 1.210 1.220 1.210 1.220 1.260 1.270 1.260 1.270 1.260 1.270 1.210 1.220 1.210 1.220 1SBL397001R4111 1SBL397001R4122 1SBL397001R1111 1SBL397001R1122 1SBL397001R1211 1SBL397001R1222 1SBL397001R1311 1SBL397001R1322 1SBL397001R1411 1SBL397001R1422 1SBL407001R4111 1SBL407001R4122 1SBL407001R1111 1SBL407001R1122 1SBL407001R1211 1SBL407001R1222 1SBL407001R1311 1SBL407001R1322 1SBL407001R1411 1SBL407001R1422 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. (2) AF..-30-..-11 not suitable for direct control by PLC-output. mm, inches 149 5.87"149 5.87" 116 4.57" 116 4.57" 70 2.76" 70 2.76" 10 10 0.39" 0.39" 10 0.39" 10 0.39" AF80, AF96-30-11-.. AF80, AF96-30-22-.. ABB | 5/107 43 1.69" 5.5 0.22"5.5 0.22" 1SBC101742S0201 - Rev. A 6 0.24" 35 x 15 mm EN/IEC 60715 119.5 4.70" 35 x 15 mm EN/IEC 60715 35 x 15 mm EN/IEC 60715 119.5 4.70" 119.5 4.70" 5.5 0.22" 5.5 0.22" 116 4.57"116 4.57" 7 0.28" 7 0.28" 119.5 4.70" 6 0.24" 6 0.24" 6 0.24" 7 0.28"7 0.28" 35 x 15 mm EN/IEC 60715 70 2.76" 70 2.76" 43 1.69" Main dimensions 12 0.47" 12 0.47" AF09 ... AF96 2-stack 3-pole contactors Main accessories Contactor and main accessories (other accessories available) AF09 ... AF96-30-22 AF26 ... AF38-30-11 AF 2-stack contactor 5 BX4-CA Protective cover CAL4-11 2-pole auxiliary contact block TF42 EF Overload relay Main accessory fitting details Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor types Built-in Front-mounted accessories auxiliary Auxiliary contact blocks contacts Main poles Electronic timer 1-pole CA4 1-pole CC4 AF26 AF40 AF80 AF09 AF40 ... ... ... ... ... AF38 AF65 AF96 AF96 AF96 3 3 3 3 3 0 0 0 0 0 1 1 1 2 2 1 1 1 2 2 – 4 max. 4 max. – – 2-pole CAT4-11 – or 1 – – – 4-pole CA4 – or 1 or 1 – – TEF4 – or 1 or 1 – – Electrical and mechanical interlock set Side-mounted accessories Auxiliary contact blocks (between 2 contactors) Left side VEM4 2-pole CAL4-11 – – – – – + 1 – – + 1 + 1 Right side + 1 + 1 + 1 – + 1 Overload relays fitting details (1) Contactor types AF09 ... AF38 AF26 ... AF38 AF40 ... AF65 AF80, AF96 Thermal overload relays TF42 (0.10...38 A) TF42 (0.10...38 A) TF65 (22...67 A) TF96 (40...96 A) Electronic overload relays EF19 (0.10...19 A) EF45 (9...45 A) EF65 (20...70 A) EF96 (36...100 A) 1SBC101750S0201 - Rev. A The addition of an overload relay on the contactor does not prevent fitting of many other accessories as shown above. (1) Direct mounting - No kit required. 5/108 | ABB AF09 ... AF96 2-stack 3-pole contactors Main accessories Ordering Details (1) 1SBC100007V0014 For contactors Auxiliary contacts Type Order code Pkg qty Weight (1 pce) 1SBC100010V0014 kg CAL4-11 Side-mounted instantaneous auxiliary contact blocks AF09 ... AF96 1 1 – – CAL4-11 1 1 – – CAL4-11-T 1SBN010120R1011 1SBN010120T1011 1 10 0.040 0.040 Mechanical interlock unit AF09 ... AF38 AF40 ... AF96 1SBN030105T1000 1SBN033405T1000 10 10 0.005 0.006 Pkg qty Weight (1 pce) VM4 VM96-4 Note: VM4 and VM96-4 include 2 fixing clips (BB4) to maintain together both contactors. VM4 1SBC100014V0014 For contactors Time delay range Delay type Auxiliary Type contacts Order code selected by switch Electronic timers AF40 ... AF96-30-11 0.1...1 s 1...10 s 10...100 s BEA16-4 5 kg ON-delay 1 1 TEF4-ON 1SBN020112R1000 1 0.065 OFF-delay 1 1 TEF4-OFF 1SBN020114R1000 1 0.065 BEA16-4 1SBN081306T1000 10 0.025 BEA26-4 1SBN082306T1000 10 0.025 BEA38-4 1SBN082306T2000 10 0.030 Connection sets for reversing contactors AF09 ... AF16 AF26 ... AF38 AF40 ... AF65 AF80 ... AF96 BER16-4 BER38-4 BER65-4 BER96-4 1SBN081311R1000 1SBN082311R1000 1SBN083411R1000 1SBN083911R1000 1 1 1 1 0.045 0.100 0.175 0.250 Connection sets for star-delta starting AF09 ... AF16 with or without VM4 AF26 ... AF38 with or without VM4 AF40 ... AF65 with or without VM96-4 AF80 ... AF96 with or without VM96-4 BEY16-4 BEY38-4 BEY65-4 BEY96-4 1SBN081313R2000 1SBN082713R2000 1SBN083413R2000 1SBN083913R2000 1 1 1 1 0.050 0.110 0.200 0.250 1SBC100004V0014 Note: Rated control circuit voltage Uc 24...240 V 50/60 Hz or DC. 1SBC100016V0014 TEF4-ON BER16-4 Connecting links with manual motor starters AF09 ... AF16 with MS116-0.16 … MS116-25, MS132-0.16 … MS132-25 AF26 ... AF38 with MS116-0.16 … MS116-16, MS132-0.16 ... MS132-10 with MS116-20 … MS116-32, MS132-12 ... MS132-32 1SBC100018V0014 (1) For more information, refer to "Accessories" section. 1SBC101751S0201 BEY16-4 ABB | 5/109 AF116 ... AF146 3-pole contactors 55 to 75 kW AC / DC operated with 2 N.O. + 2 N.C. auxiliary contacts 1SFC101009V0001 Description AF146-30-22 AF116 ... AF140 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC, AF146 up to 1000 V AC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 1SFC101010V0001 5 AF146-30-22B UL / CSA 3-phase motor rating 480 V Rated control General circuit voltage use Uc min. ... Uc max. rating 600 V AC hp A 160 75 200 100 200 75 225 100 200 Order code Weight Pkg (1 pce) V 50/60 Hz V DC For connection with built-in cable clamps 55 75 24...60 20...60 160 160 48...130 48...130 100...250 100...250 250...500 250...500 75 100 24...60 20...60 200 200 48...130 48...130 100...250 100...250 250...500 250...500 75 100 24...60 20...60 225 200 48...130 48...130 100...250 100...250 250...500 250...500 With bar connections 55 75 160 Auxiliary Type contacts (1) fitted 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 kg 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 AF116-30-22-11 AF116-30-22-12 AF116-30-22-13 AF116-30-22-14 AF140-30-22-11 AF140-30-22-12 AF140-30-22-13 AF140-30-22-13 AF146-30-22-11 AF146-30-22-12 AF146-30-22-13 AF146-30-22-14 1SFL427001R1122 1SFL427001R1222 1SFL427001R1322 1SFL427001R1422 1SFL447001R1122 1SFL447001R1222 1SFL447001R1322 1SFL447001R1422 1SFL467001R1122 1SFL467001R1222 1SFL467001R1322 1SFL467001R1422 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 AF116-30-22B-11 AF116-30-22B-12 AF116-30-22B-13 AF116-30-22B-14 AF140-30-22B-11 AF140-30-22B-12 AF140-30-22B-13 AF140-30-22B-14 AF146-30-22B-11 AF146-30-22B-12 AF146-30-22B-13 AF146-30-22B-14 1SFL427002R1122 1SFL427002R1222 1SFL427002R1322 1SFL427002R1422 1SFL447002R1122 1SFL447002R1222 1SFL447002R1322 1SFL447002R1422 1SFL467002R1122 1SFL467002R1222 1SFL467002R1322 1SFL467002R1422 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. mm, inches 30 1.18" AF116, AF140, AF146-30-22 5/110 | ABB SECTION E-E E 90 3.54" D 126 4.96" D 30 1.18" AF116, AF140, AF146-30-22B 19.5 0.77" 10 0.39" 150 5.91" 150 5.91" D 19.5 4.96" D 126 4.96" 1SFC101092C0201 - Rev. C SECTION E-E 90 3.54" 55.5 0.22" 10 0.39" E 55.5 2.18" Main dimensions AF116 ... AF146 3-pole contactors with built-in PLC interface 55 to 75 kW AC / DC operated with 2 N.O. + 2 N.C. auxiliary contacts 1SFC101184V0001 Description AF146-30-22 AF116 ... AF146 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC, AF146 up to 1000 V AC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 2 coils to cover control voltages between 100...500 V 50/60 Hz and 100...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A UL / CSA 3-phase motor rating 480 V Rated control General circuit voltage use Uc min. ... Uc max. rating 600 V AC hp A Auxiliary Type contacts (1) fitted Order code Weight 5 Pkg (1 pce) V 50/60 Hz V DC kg 160 75 160 75 200 100 200 75 225 100 200 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 2 2 2 2 2 2 2 2 2 2 2 2 AF116-30-22-33 AF116-30-22-34 AF140-30-22-33 AF140-30-22-33 AF146-30-22-33 AF146-30-22-34 1SFL427001R3322 1SFL427001R3422 1SFL447001R3322 1SFL447001R3422 1SFL467001R3322 1SFL467001R3422 1.750 1.750 1.750 1.750 1.750 1.750 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 2 2 2 2 2 2 2 2 2 2 2 2 AF116-30-22B-33 AF116-30-22B-34 AF140-30-22B-33 AF140-30-22B-34 AF146-30-22B-33 AF146-30-22B-34 1SFL427002R3322 1SFL427002R3422 1SFL447002R3322 1SFL447002R3422 1SFL467002R3322 1SFL467002R3422 1.500 1.500 1.500 1.500 1.500 1.500 With bar connections 55 160 75 160 75 200 100 200 75 225 100 200 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. AF116 ... AF146 are equipped with low voltage inputs for control, for example by a PLC. Control inputs mm, inches 142.5 5.61" E 90 3.54" D D 19.5 4.96" 10 0.39" D 150 5.91" D 30 1.18" AF116, AF140, AF146-30-22 142.5 5.61" 1SFC101168C0201 90 3.54" 19.5 0.77" 10 0.39" 55.5 2.18" Main dimensions 55.5 0.22" AF146-30-22B 55 150 5.91" 1SFC101187V0001 For connection with built-in cable clamps 30 1.18" AF116, AF140, AF146-30-22B ABB | 5/111 AF190 ... AF370 3-pole contactors 90 to 200 kW AC / DC operated with 2 N.O. + 2 N.C. auxiliary contacts Description 1SFC101014V0001 AF190 ... AF370 contactors are mainly used for controlling 3-phase motors and power circuits up to 1000 V AC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF205-30-22 Ordering details 1SFC101020V0001 5 AF370-30-22 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 90 275 UL / CSA 3-phase motor rating 480 V Rated control General circuit voltage use Uc min. ... Uc max. rating 600 V AC hp 125 A 250 110 350 150 300 140 400 200 350 160 500 250 400 200 600 300 520 V 50/60 Hz 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 V DC 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 Auxiliary Type contacts (1) fitted 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Order code Weight Pkg (1 pce) AF190-30-22-11 AF190-30-22-12 AF190-30-22-13 AF190-30-22-14 AF205-30-22-11 AF205-30-22-12 AF205-30-22-13 AF205-30-22-14 AF265-30-22-11 AF265-30-22-12 AF265-30-22-13 AF265-30-22-14 AF305-30-22-11 AF305-30-22-12 AF305-30-22-13 AF305-30-22-14 AF370-30-22-11 AF370-30-22-12 AF370-30-22-13 AF370-30-22-14 kg 3.000 3.000 3.000 3.000 3.000 3.000 3.000 3.000 4.675 4.675 4.675 4.675 4.675 4.675 4.675 4.675 4.675 4.675 4.675 4.675 1SFL487002R1122 1SFL487002R1222 1SFL487002R1322 1SFL487002R1422 1SFL527002R1122 1SFL527002R1222 1SFL527002R1322 1SFL527002R1422 1SFL547002R1122 1SFL547002R1222 1SFL547002R1322 1SFL547002R1422 1SFL587002R1122 1SFL587002R1222 1SFL587002R1322 1SFL587002R1422 1SFL607002R1122 1SFL607002R1222 1SFL607002R1322 1SFL607002R1422 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. Main dimensions mm, inches A SECTION B-B 180 7.09" ø 10.5 0.41" 35.5 1.40" 5 0.20" 1SFC101093C0201 - Rev. D 43.75 1.72" AF265, AF305, AF370 33.4 1.31" 94.7 3.73" 225 8.86" 196 7.72" 35 1.38" 5 0.20" 29.5 1.16" 35.5 1.40" ø 8.5 0.33" 83.5 3.29" 105 4.13" AF190, AF205 5/112 | ABB 140 5.51" 19.5 0.77" 152 5.98" B 10 0.39" 10 0.39" AF190 ... AF370 3-pole contactors with built-in PLC interface 90 to 200 kW AC / DC operated with 2 N.O. + 2 N.C. auxiliary contacts Description 1SFC101181V0001 AF190 ... AF370 contactors are mainly used for controlling 3-phase motors and power circuits up to 1000 V AC. These contactors are of the block type design with 3 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 2 coils to cover control voltages between 100...500 V 50/60 Hz and 100...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF205-30-22 UL / CSA 3-phase motor rating 480 V Rated control General circuit voltage use Uc min. ... Uc max. rating 600 V AC hp 125 A 250 110 350 150 300 140 400 200 350 160 500 250 400 200 600 300 520 V 50/60 Hz 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 V DC 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 100...250 250...500 Auxiliary Type contacts (1) fitted 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Order code Weight 5 Pkg (1 pce) AF190-30-22-33 AF190-30-22-34 AF205-30-22-33 AF205-30-22-34 AF265-30-22-33 AF265-30-22-34 AF305-30-22-33 AF305-30-22-34 AF370-30-22-33 AF370-30-22-34 kg 3.000 3.000 3.000 3.000 4.675 4.675 4.675 4.675 4.675 4.675 1SFL487002R3322 1SFL487002R3422 1SFL527002R3322 1SFL527002R3422 1SFL547002R3322 1SFL547002R3422 1SFL587002R3322 1SFL587002R3422 1SFL607002R3322 1SFL607002R3422 (1) For other auxiliary contacts arrangements, please contact your ABB local sales organization. AF190 ... AF370 are equipped with low voltage inputs for control, for example by a PLC. Control inputs Main dimensions mm, inches A SECTION B-B 140 5.51" 19.5 0.77" 195.5 7.70" ø 10.5 0.41" 35.5 1.40" 5 0.20" 5 0.20" 35 1.38" AF190, AF205 1SFC101169C0201 225 8.86" 35.5 1.40" 33.4 1.31" ø 8.5 0.33" 94.7 3.73" 105 4.13" 29.5 1.16" 10 0.39" 10 0.39" 169.5 6.67" B 83.5 3.29" AF370-30-22 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 90 275 196 7.72" 1SFC101169V0001 Ordering details 43.75 1.72" AF265, AF305, AF370 ABB | 5/113 AF116 ... AF370 3-pole contactors with 2 N.O. + 2 N.C. auxiliary contacts Main accessories Main accessories (other accessories available) LW Terminal enlargement CAL19-11B 2-pole auxiliary contact block 5 CAL19-11B 2-pole auxiliary contact block AF contactor with built-in cable clamps TF/TA Thermal overload relay EF Electronic overload relay Main accessory fitting details Contactor types Main poles Available auxiliary contacts Side-mounted accessories Auxiliary contact blocks CAL19-11 AF116 ... AF370 3 0 2 2 – CAL19-11B + 2 x CAL19-11B Mechanical interlock units (between two contactors) – Contactor types AF116 ... AF140 AF146 AF190, AF205 AF265 ... AF370 Thermal overload relays TF140DU (66...142 A) – TA200DU (66...200 A) – Electronic overload relays EF146 (54...150 A) EF146 (54...150 A) EF205 (63...210 A) EF370 (115...380 A) The addition of a thermal or electronic overload relay on the contactor does not prevent fitting of many other accessories as shown in "Main accessory fitting details" table. (1) Direct mounting - No kit required. 5/114 | ABB 1SFC101133C0201 Overload relays fitting details (1) AF116 ... AF370 3-pole contactors with 2 N.O. + 2 N.C. auxiliary contacts Main accessories Ordering details (1) For contactors Type Order code Pkg qty Weight (1 pce) Side-mounted instantaneous auxiliary contact blocks 1 1 CAL19-11B AF116 ... AF370 1SFC101041V0001 LT370-30C Terminal shrouds AF116 ... AF146, with compression lugs AF190, AF205, with cable clamps AF190, AF205, with compression lugs AF190, AF205, with shorting bar or between contactor and TOL/EOL in DOL-starters AF265 ... AF370, with cable clamps AF265 ... AF370, with compression lugs AF265 ... AF370, with shorting bar or between contactor and TOL/EOL in DOL-starters AF265 ... AF370, for use with extending cable clamps, ATK300/2 and OZXB4 1SFC101049V0001 For contactors Dimensions 1SFN010820R3311 2 0.050 LT140-30L LT205-30C LT205-30L LT205-30Y 1SFN124203R1000 1SFN124801R1000 1SFN124803R1000 1SFN124804R1000 2 2 2 1 0.070 0.050 0.220 0.050 LT370-30C LT370-30L LT370-30Y 1SFN125401R1000 1SFN125403R1000 1SFN125404R1000 2 2 1 0.035 0.280 0.075 LT370-30D 1SFN125406R1000 1 0.150 Type Order code Pkg Weight qty (1 pce) kg hole Ø mm bar mm Terminal enlargements AF116...AF146 AF190...AF205 AF265...AF370 6.5 10.5 10.5 13 x 3 17.5 x 5 20 x 5 LW140 LW205 LW370 1SFN074207R1000 1SFN074807R1000 1SFN075407R1000 1 1 1 0.115 0.260 0.340 Terminal extension AF116...AF146 AF190...AF250 AF265...AF370 6.5 8.5 10.5 13 x 3 17.5 x 5 20 x 5 LX140 LX205 LX370 1SFN074210R1000 1SFN074810R1000 1SFN075410R1000 1 1 1 0.072 0.180 0.234 5 (1) For more information, refer to "Accessories" section. 1SFC101139C0201 1SFC101071V0001 kg CAL19-11 LX140 Auxiliary contacts ABB | 5/115 AF400 ... AF750 3-pole contactors 200 to 400 kW AC / DC operated with 2 N.O. + 2 N.C. auxiliary contacts Description 1SFC101081V0001 AF400 ... AF750 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC or 600 V DC (2). These contactors are of the block type design with 3 main poles. – control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 48...500 V 50/60 Hz and 24...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltages sags (SEMI F47 conditions of use on request). – built-in surge suppression – add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF460-30-22 Ordering details 1SFC101091V0001 5 AF750-30-22 IEC Rated operational power current θ ≤ 40 °C 400 V 690 V AC-3 AC-1 kW A 200 600 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage Uc use rating 600 V AC hp 350 A 550 250 700 400 650 315 800 500 750 400 1050 600 900 V 50/60 Hz 48…130 100…250 250…500 48…130 100…250 250…500 48…130 100…250 250…500 48…130 100…250 250…500 Auxiliary Type contacts fitted V DC 24…60 48…130 100…250 250…500 24…60 48…130 100…250 250…500 24…60 48…130 100…250 250…500 24…60 48…130 100…250 250…500 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 AF400-30-22 AF400-30-22 AF400-30-22 AF400-30-22 AF460-30-22 AF460-30-22 AF460-30-22 AF460-30-22 AF580-30-22 AF580-30-22 AF580-30-22 AF580-30-22 AF750-30-22 AF750-30-22 AF750-30-22 AF750-30-22 Order code Weight Pkg (1 pce) kg 12.000 12.000 12.000 12.000 12.000 12.000 12.000 12.000 15.000 15.000 15.000 15.000 15.000 15.000 15.000 15.000 1SFL577001R6822 (1) 1SFL577001R6922 1SFL577001R7022 1SFL577001R7122 1SFL597001R6822 (1) 1SFL597001R6922 1SFL597001R7022 1SFL597001R7122 1SFL617001R6822 (1) 1SFL617001R6922 1SFL617001R7022 1SFL617001R7122 1SFL637001R6822 (1) 1SFL637001R6922 1SFL637001R7022 1SFL637001R7122 (1) The connection polarities indicated close to the coil terminals must be respected: A1 for the positive pole and A2 for the negative pole. (2) Up to 850 V DC for AF580, AF750. AF400...AF750 are equipped with low voltage inputs for control, for example by a PLC. ø12.5 0.49" 242 9.53" 6 0.24" 283 11.14" 48.5 1.91" 72 2.83" AF580, AF750 E1633D E1627D1 1SFC101123F0001 11.5 0.45" 6 0.24" 278 10.94" 1SFC101122F0001 63 2.48" AF400, AF460 5/116 | ABB 48.5 1.91" 210 8.27" ø6.5 22.5 0.89" 0.26" 40 1.57" 216 8.5" ø10.5 0.41" 1SFC101014C0201 - Rev. A mm, inches 268 10.55" 25 0.98" 186 7.32" 22.5 ø6.5 0.26" 0.89" 273 10.75" Main dimensions 11.5 0.45" Control inputs AF1250 ... AF2650 3-pole contactors 475 to 560 kW and 1260 to 2650 A AC-1 AC / DC operated with 2 N.O. + 2 N.C. auxiliary contacts Description 1SFC101092V0001 AF1250 ... AF2050 contactors are mainly used for controlling power circuits up to 1000 V AC or 850 V DC, AF2650 for controlling power up to 1000 V AC. These contactors are of the block type design with 3 main poles. – control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC) - only 4 coils for AF1250 to cover control voltages between 48...500 V 50/60 Hz and 24...500 V DC - only 1 coil for AF1350 ... AF2650 to cover control voltages between 100...250 V 50/60 Hz and 100...250 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltages sags (SEMI F47 conditions of use on request). – built-in surge suppression – add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF1250-30-22 UL/CSA 3-phase motor rating 480 V 475 560 - 800 900 - 1350 1650 2050 2650 hp - Rated control circuit voltage Uc (1) General use rating 600 V AC (2) A V 50/60 Hz 1210 48…130 100…250 250…500 1350 100…250 1650 100…250 2100 100…250 2700 100...250 Auxiliary Type contacts fitted V DC 24…60 48…130 100…250 250…500 100…250 100…250 100…250 100...250 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Order code 5 Weight Pkg (1 pce) AF1250-30-22 AF1250-30-22 AF1250-30-22 AF1250-30-22 AF1350-30-22 AF1650-30-22 AF2050-30-22 AF2650-30-22 kg 16.000 16.000 16.000 16.000 34.000 35.000 35.000 45.000 1SFL647001R6822 (1) 1SFL647001R6922 1SFL647001R7022 1SFL647001R7122 1SFL657001R7022 1SFL677001R7022 1SFL707001R7022 1SFL667001R7022 (1) The connection polarities indicated close to the coil terminals must be respected: A1 for the positive pole and A2 for the negative pole. (2) AF2650 : Maximum operational voltage = 1000 V according to UL / CSA. AF1250 ... AF2650 are equipped with low voltage inputs for control, for example by a PLC. Control inputs AF1350, AF1650, AF2050 392 mm / 15.43" 47 mm / 1.85" 10 mm / 0.39" A B C Main dimensions mm, inches 27 50 1.97" ø 13 0.51" 13 0.51" 72 2.83" 30 1.18" ø 7 0.28" 10 0.39" ø 13 0.51" 13 0.51" AF1350, AF1650 242 9.53" 40 1.57" 17 0.67" 17 0.67" 30 1.18" 40 1.57" 10 0.39" AF2050 136 5.35" AF2650 244 9.61" 136 5.35" 312 12.3" 80 3.15" 101 3.98" 136 5.35" ø 9 0.35" 438 17.24" AF1350, AF1650, AF2050, AF2650 ABB | 5/117 1SFC101095C0201 - Rev. A 8 0.31" 40 46.5 18.3" 1SFC101125F0001 A 72 2.83" 1SFC101124F0001 72 2.83" 210 8.27" AF1250 C 249 9.8" 263 10.35" B ø7 0.28" 40 1.57" 17 0.67" 1.57" 27 AF2650 422 mm / 16.61" 53 mm / 2.11" 25 mm / 0.98" 40 1.57" 1.06" 313 12.32" AF2650-30-22 IEC Rated operational power current θ ≤ 40 °C 400 V 690 V AC-3 AC-1 kW A 1260 344 13.54" 1SFC101032V0001 Ordering details AF400... AF2650 3-pole contactors with 2 N.O. + 2 N.C. auxiliary contacts Main accessories Main accessories (other accessories available) LW Terminal enlargement LZ Connector terminal CAL18-11B 2-pole auxiliary contact block 5 VM Mechanical interlock LT Terminal shroud AF contactor CAL18-11B 2-pole auxiliary contact block Main accessory fitting details Contactor types Main poles Available auxiliary contacts Side-mounted accessories Auxiliary contact blocks CAL18-11 Mechanical interlock units CAL18-11B (2) (between two contactors) 2 x CAL18-11B – Contactors + auxiliary contact blocks AF145 ... AF2650 3 0 2 2 – Contactors with mechanical interlocking + auxiliary contact blocks AF400 ... AF2650 3 0 2 2 – 4 x CAL18-11B + VM...H (1) Overload relays fitting details Contactor types AF400, AF460 AF580, AF750 AF1350, AF1650 Thermal overload relays – – – Electronic overload relays EF460 (150...500 A) (3) EF750 (250...800 A) (3) E1250DU (375...1250 A) (3) The addition of a thermal or electronic overload relay on the contactor does not prevent fitting of many other accessories as shown in "Main accessory fitting details" table. (3) Mounting kit required (see "Motor protection"). 5/118 | ABB 1SFC101127C0201 - Rev. A (1) Interlock type, according to the contactor ratings (see "Accessories"). (2) The CEL18-.. auxiliary contact blocks can replace the CAL18-11 and CAL18-11B. Though, no auxiliary contact block can be mounted outside the CEL18-.. AF400 ... AF2650 3-pole contactors with 2 N.O. + 2 N.C. auxiliary contacts Main accessories Ordering details (1) 1SFC101082V0001 For contactors Auxiliary contacts Type Order code Pkg qty Weight (1 pce) kg 1SFC101089V0001 VM750H Side-mounted instantaneous auxiliary contact blocks 1 1 CAL18-11B AF400 ... AF2650 1SFN010720R3311 2 0.050 Mechanical interlock unit AF400 ... AF1250 AF1350 ... AF2650 VM750H VM1650H 1SFN035700R1000 1SFN036503R1000 1 1 0.200 6.000 Terminal shrouds AF400, AF460 with connectors AF400, AF460 with lugs AF580 ... AF750 with connectors AF580 ... AF750 with lugs LT460-AC LT460-AL LT750-AC LT750-AL 1SFN125701R1000 1SFN125703R1000 1SFN126101R1000 1SFN126103R1000 2 2 2 2 0.100 0.800 0.120 0.825 Type Order code Pkg Weight qty (1 pce) kg For contactors Dimensions hole Ø mm bar mm Terminal enlargements AF400, AF460 AF580, AF750 AF1250 10.5 13 13 25 x 5 40 x 6 50 x 10 LW460 LW750 LW1250 1SFN075707R1000 1SFN076107R1000 1SFN076407R1000 1 1 1 0.730 1.230 2.000 Terminal extension AF400, AF460 AF580, AF750 10.5 13 25 x 5 40 x 6 LX460 LX750 1SFN075710R1000 1SFN076110R1000 1 1 0.500 0.850 LT460-AC 5 (1) For more information, refer to "Accessories" section. 1SFC101140C0201 1SFC101084V0001 CAL18-11 ABB | 5/119 AF09 ... AF38 3-pole contactors Technical data Main pole - Utilization characteristics according to IEC AC / DC operated Contactor types Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C With conductor cross-sectional area AC-1 Utilization category For air temperature close to contactor θ ≤ 40 °C Ie / Rated operational current AC-1 θ ≤ 60 °C Ue max. ≤ 690 V, 50/60 Hz M 3 3-phase motors AF30 AF38 35 A 6 mm² 35 A 6 mm² 35 A 6 mm² 50 A 10 mm² 50 A 10 mm² 50 A 10 mm² 25 A 25 A θ ≤ 70 °C 22 A 4 mm² 28 A 28 A 24 A 6 mm² 30 A 30 A 26 A 6 mm² 45 40 32 10 A A A mm² 50 42 37 10 A A A mm² 50 42 37 10 A A A mm² 12 A 12 A 12 A 12 A 12.5 A 9A 18 A 18 A 18 A 18 A 15 A 10.5 A 26 26 26 26 23 17 A A A A A A 33 32 32 32 28 21 A A A A A A 40 38 38 38 33 24 A A A A A A 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 9A 9A 9A 9A 9.5 A 7A 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 2.2 kW 3 kW 4 kW 4 kW 5.5 kW 7.5 kW 4 kW 5.5 kW 9 kW 4 kW 5.5 kW 9 kW 5.5 kW 7.5 kW 9 kW 5.5 kW 7.5 kW 9 kW 10 x Ie AC-3 acc. to IEC 60947-4-1 8 x Ie AC-3 acc. to IEC 60947-4-1 6.5 kW 11 kW 11 kW 15 kW 15 kW 15 kW 9 kW 15 kW 15 kW 18.5 kW 18.5 kW 18.5 kW 11 kW 18.5 kW 18.5 kW 22 kW 22 kW 22 kW 12 A 5.5 kW Rated operational power AC-3 (1) M 3 1500 r.p.m. 50 Hz 1800 r.p.m. 60 Hz 3-phase motors Rated making capacity AC-3 Rated breaking capacity AC-3 AC-8a Utilization category (without thermal overload relay - Ue 400 V 50/60 Hz - θ ≤ 40 °C) Ie / Rated operational current AC-8a Rated operational power AC-8a Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded (2) Ue ≤ 500 V AC - gG type fuse 1s Rated short-time withstand current Icw 10 s at 40 °C ambient temperature, in free air from a cold state 30 s 25 A 300 A 150 A 80 A 1 min 60 A 15 min 35 A Maximum breaking capacity cos φ = 0.45 Power dissipation per pole Max. electrical switching frequency at 440 V at 690 V Ie / AC-1 Ie / AC-3 AC-1 AC-3 AC-2, AC-4 250 A 106 A 0.8 W 0.1 W 600 cycles/h 1200 cycles/h 300 cycles/h 16 A 7.5 kW 22 A 11 kW 30 A 15 kW 40 A 20 kW 50 A 25 kW 32 A 300 A 150 A 80 A 60 A 35 A 32 A 300 A 150 A 80 A 60 A 35 A 50 A 700 A 350 A 225 A 150 A 50 A 63 A 700 A 350 A 225 A 150 A 50 A 63 A 700 A 350 A 225 A 150 A 50 A 250 A 106 A 1W 0.2 W 250 A 106 A 1.2 W 0.35 W 500 A 200 A 1.8 W 0.6 W 500 A 200 A 2.4 W 0.9 W 500 A 200 A 2.4 W 1.3 W 150 cycles/h (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". (2) For the protection of motor starters against short circuits, see "Coordination with short-circuit protection devices". 1SBC101425S0201 - Rev. A 5 With conductor cross-sectional area AC-3 Utilization category For air temperature close to contactor θ ≤ 60 °C Ie / Max. rated operational current AC-3 (1) AF09 AF12 AF16 AF26 IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 690 V 50 / 60 Hz 5/120 | ABB AF40 ... AF96 3-pole contactors Technical data Main pole - Utilization characteristics according to IEC AC / DC operated Contactor types Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C With conductor cross-sectional area AC-1 Utilization category For air temperature close to contactor Ie / Rated operational current AC-1 θ ≤ 40 °C Ue max. ≤ 690 V, 50/60 Hz θ ≤ 60 °C With conductor cross-sectional area AC-3 Utilization category For air temperature close to contactor θ ≤ 60 °C Ie / Max. rated operational current AC-3 (1) M 3 3-phase motors AF40 AF52 AF65 IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 690 V 50 / 60 Hz AF80 AF96 105 A 35 mm² 70 60 θ ≤ 70 °C 50 25 105 A 35 mm² 105 A 35 mm² 130 A 50 mm² 130 A 50 mm² A A A mm² 100 A 80 A 70 A 35 mm² 105 A 90 A 80 A 35 mm² 125 A 100 A 85 A 50 mm² 130 A 105 A 90 A 50 mm² A A A A A A 53 53 53 53 45 35 - 65 65 65 65 55 39 - 80 80 80 80 65 49 25 96 A 96 A 96 A 96 A 80 A 57 A 30A 5 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 1000 V 40 40 40 40 35 25 - A A A A A A A A A A A A A A A A A A A 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 1000 V 11 kW 15 kW 18.5 kW 22 kW 22 kW 30 kW 22 kW 30 kW 22 kW 30 kW 22 kW 30 kW 10 x Ie AC-3 acc. to IEC 60947-4-1 8 x Ie AC-3 acc. to IEC 60947-4-1 18.5 kW 30 kW 37 kW 37 kW 37 kW 37 kW - 22 kW 37 kW 45 kW 45 kW 45 kW 45 kW 35 kW 25 kW 45 kW 55 kW 55 kW 55 kW 55 kW 40 kW 53 A 25 kW 70 A 37 kW 85 A 45 kW 105 A 55 kW 120 A 65 kW 125 A 1000 A 600 A 350 A 250 A 110 A 160 A 1000 A 600 A 350 A 250 A 110 A 160 A 1200 A 780 A 450 A 300 A 140 A 200 A 1200 A 780 A 450 A 300 A 140 A 950 A 600 A 6.3 W 1.7 W 950 A 600 A 7W 2.7 W 1150 A 750 A 7.6 W 3W 1150 A 750 A 8.2 W 4.5 W Rated operational power AC-3 (1) M 3 1500 r.p.m. 50 Hz 1800 r.p.m. 60 Hz 3-phase motors Rated making capacity AC-3 Rated breaking capacity AC-3 AC-8a Utilization category (without thermal overload relay - Ue 400 V 50/60 Hz - θ ≤ 40 °C) Ie / Rated operational current AC-8a Rated operational power AC-8a Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded (2) Ue ≤ 500 V AC - gG type fuse 1 s Rated short-time withstand current Icw 10 s at 40 °C ambient temperature, 30 s in free air from a cold state 100 A 1000 A 600 A 350 A 1 min 250 A 15 min 110 A Maximum breaking capacity cos φ = 0.45 Power dissipation per pole Max. electrical switching frequency at 440 V at 690 V Ie / AC-1 Ie / AC-3 AC-1 AC-3 AC-2, AC-4 950 A 600 A 3W 1W 600 cycles/h 1200 cycles/h 150 cycles/h 1SBC101743S0201 - Rev. A (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". (2) For the protection of motor starters against short circuits, see "Coordination with short-circuit protection devices". ABB | 5/121 AF116 ... AF370 3-pole contactors Technical data Main pole - Utilization characteristics according to IEC AC / DC operated Contactor types Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C With conductor cross-sectional area AC-1 Utilization category For air temperature close to contactor θ ≤ 40 °C Ie / Rated operational current AC-1 θ ≤ 60 °C Ue max. ≤ 690 V, 50/60 Hz Ie / Rated operational current AC-1 Ue max. ≤ 1000 V, 50/60 Hz 3-phase motors AF305 AF370 1000 V 1000 V 1000 V 160 A 70 mm2 200 A 95 mm2 225 A 95 mm2 275 A 150 mm2 350 A 400 A 240 mm2 (3) 240 mm2 500 A 600 A 300 mm2 (4) 2 x 185 mm2 (4) 160 A 145 A 130 A — — — 70 mm2 200 A 175 A 160 A — — — 95 mm2 225 A 200 A 175 A 225 A 200 A 175 A 95 mm2 275 250 200 250 225 185 150 350 300 240 275 250 200 240 A A A A A A mm2 (3) 400 350 290 350 300 240 240 A A A A A A mm2 500 400 325 375 325 260 300 A A A A A A mm2 (4) 600 A 500 A 400 A 400 A 350 A 290 A 2 x 185 mm2 (4) 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 1000 V 116 A 116 A 116 A 116 A 110 A 65 A — 140 A 140 A 140 A 140 A 130 A 80 A — 146 A 146 A 146 A 146 A 130 A 93 A 60 A 190 A 190 A 190 A 190 A 135 A 135 A 85 A 205 205 205 205 165 165 100 A A A A A A A 265 265 265 265 250 250 100 A A A A A A A 305 305 305 305 290 290 100 A A A A A A A 370 370 370 370 315 315 100 A A A A A A A 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 1000 V 30 kW 37 kW 45 kW 55 kW 75 kW 75 kW 55 kW 75 kW 75 kW 75 kW 90 kW 90 kW 75 kW 90 kW 90 kW 55 kW 75 kW 90 kW — — 75 kW 10 x Ie AC-3 acc. to IEC 60947-4-1 8 x Ie AC-3 acc. to IEC 60947-4-1 55 kW 90 kW 90 kW 110 kW 90 kW 132 kW 110 kW 55 kW 110 kW 110 kW 132 kW 110 kW 160 kW 132 kW 75 kW 132 kW 132 kW 160 kW 200 kW 200 kW 132 kW 90 kW 160 kW 160 kW 160 kW 200 kW 250 kW 132 kW 110 200 200 200 250 315 132 kW kW kW kW kW kW kW 315 A 1460 A 1168 A 674 A 477 A 225 A 355 A 1900 A 1520 A 878 A 621 A 275 A 400 A 2050 A 1640 A 947 A 670 A 350 A 500 A 2650 A 2120 A 1224 A 865 A 400 A 500 A 3050 A 2440 A 1409 A 996 A 500 A 630 A 3700 A 2960 A 1709 A 1208 A 600 A 3000 A 1500 A 23 W 10 W 3300 A 2200 A 15 W 7W 3500 A 2500 A 25 W 8W 3800 A 3300 A 32 W 14 W 4600 A 3800 A 50 W 19 W 5000 A 4000 A 72 W 27 W θ ≤ 70 °C θ ≤ 40 °C θ ≤ 60 °C θ ≤ 70 °C With conductor cross-sectional area AC-3 Utilization category For air temperature close to contactor θ ≤ 60 °C Ie / Max. rated operational current AC-3 (1) M 3 AF265 A A A A A A mm2 Rated operational power AC-3 (1) M 3 1500 r.p.m. 50 Hz 1800 r.p.m. 60 Hz 3-phase motors Rated making capacity AC-3 Rated breaking capacity AC-3 Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded (2) Ue ≤ 500 V AC - gG type fuse 250 A 315 A 1 s 1300 A Rated short-time withstand current Icw 1460 A 10 s 928 A at 40 °C ambient temperature, 1168 A 30 s 536 A in free air from a cold state 674 A 1 min 379 A 477 A 15 min 160 A 200 A Maximum breaking capacity at 440 V 2000 A 3000 A cos φ = 0.45 at 690 V 1000 A 1500 A (cos φ = 0.35 for Ie > 100 A) Ie / AC-1 12 W Power dissipation per pole 18 W Ie / AC-3 6 W 9W AC-1 300 cycles/h Maximum electrical switching frequency AC-3 300 cycles/h AC-2, AC-4 150 cycles/h (1) (2) (3) (4) For For For For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". the protection of motor starters against short circuits, see "Coordination with short-circuit protection devices". currents above 275A use terminal enlargements or terminal extensions. currents above 450A use terminal enlargements or terminal extensions. 1SFC101108C0201 - Rev. A 5 AF116 AF140 AF146 AF190 AF205 IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 690 V 690 V 1000 V 1000 V 1000 V 50 / 60 Hz 5/122 | ABB AF400 … AF2650 3-pole contactors Technical data Main pole - Utilization characteristics according to IEC AC / DC operated Contactor types Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C With conductor cross-sectional area (3) AC-1 Utilization category For air temperature close to contactor Ie / Rated operational current AC-1 θ ≤ 40 °C θ ≤ 55 °C Ue max. ≤ 690 V, 50/60 Hz θ ≤ 70 °C Ie / Rated operational current AC-1 θ ≤ 40 °C θ ≤ 55 °C Ue max. ≤ 1000 V, 50/60 Hz θ ≤ 70 °C With conductor cross-sectional area AC-3 Utilization category For air temperature close to contactor θ ≤ 55 °C Ie / Max. rated operational current AC-3 (1) M 3 3-phase motors 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 1000 V AF400 AF460 AF580 AF750 AF1250 IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 1000 V 50/60 Hz AF1350 600 A 700 A 800 A 1050 A 2x185 mm² 2x240 mm² 2x240 mm² 800 mm² (4) 1260 A 1000 mm² (4) 1350 A 1650 A 2050 A 2650 A 1000 mm² (5) 1500 mm² (5) 2000 mm² (5) 3000 mm² (5) 600 A 500 A 400 A 600 A 500 A 400 A 2x185 mm² 700 A 600 A 480 A 700 A 600 A 480 A 2x240 mm² 800 A 700 A 580 A 800 A 700 A 580 A 2x240 mm² 1050 A 875 A 720 A 1000 A 875 A 720 A 800 mm² (4) 1260 A 1040 A 875 A 1260 A 1040 A 875 A 1000 mm² (4) 1350 A 1150 A 1000 A 1350 A 1150 A 1000 A 1000 mm² (5) 1650 A 1450 A 1270 A 1650 A 1450 A 1270 A 1500 mm² (5) 2050 A 1750 A 1500 A 2050 A 1750 A 1500 A 2000 mm² (5) 2650 A 2350 A 2120 A 2650 A 2350 A 2120 A 3000 mm² (5) 400 400 400 400 400 350 155 460 460 460 460 460 400 200 580 580 580 580 580 500 250 750 750 750 750 750 650 300 A A A A A A A – – – – – – – 860 860 860 860 800 800 – A A A A A A 1060 A 1060 A 1060 A 1060 A 970 A 970 A – 1060 A 1060 A 1060 A 1060 A 970 A 970 A – – – – – – – – kW kW kW kW kW kW kW – – – – – – – 257 475 500 560 560 800 – kW kW kW kW kW kW 315 kW 560 kW 630 kW 710 kW 700 kW 1000 kW – – – 630 kW 710 kW – 1000 kW – – – – – – – – A A A A A A A A A A A A A A A A A A A A A AF1650 AF2050 AF2650 5 Rated operational power AC-3 (1) M 3 1500 r.p.m. 50 Hz 1800 r.p.m. 60 Hz 3-phase motors 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 1000 V Rated making capacity AC-3 Rated breaking capacity AC-3 Short-circuit protection device for contactors without thermal overload relay Motor protection excluded (2) Ue ≤ 500 V AC - gG type fuse 1s Rated short-time withstand current Icw 10 s at 40 °C ambient temperature, in free air from a cold state 30 s 110 kW 132 kW 160 kW 220 200 kW 250 kW 315 kW 400 220 kW 250 kW 355 kW 425 220 kW 250 kW 355 kW 450 250 kW 315 kW 400 kW 520 315 kW 355 kW 500 kW 600 220 kW 280 kW 355 kW 400 10 x Ie AC-3 acc. to IEC 60947-4-1 8 x Ie AC-3 acc. to IEC 60947-4-1 630 A 4600 A 4400 A 3100 A 1 min 2500 A 15 min 840 A Maximum breaking capacity cos φ = 0.45 (cos φ = 0.35 for Ie > 100 A) Power dissipation per pole Max. electrical switching frequency 4000 A 5000 A 3500 A 4500 A 30 W 42 W 16 W 21 W 300 cycles/h 300 cycles/h 60 cycles/h 1000 7000 6400 4500 3500 1300 A A A A A A 1000 7000 6400 4500 3500 1300 A A A A A A 6000 A 7500 A 5000 A 7000 A 32 W 50 W 17 W 28 W 300 cycles/h 300 cycles/h 60 cycles/h Please consult us for coordination with circuit-breaker 8000 A 10000 A 12000 A 12000 A 12000 A 7200 A 8000 A 10000 A 10000 A 10000 A 5200 A 6000 A 7500 A 7500 A 7500 A 4000 A 4500 A 5500 A 5500 A 5500 A 1500 A 1600 A 2200 A 2200 A 2800 A 10000 A – 80 W 80 W – 50 W 300 cycles/h 60 cycles/h – 60 cycles/h – 60 cycles/h 12000 A – 80 W 50 W 8400 A – 125 W – 60 cycles/h – – 8400 A – 200 W – 15 cycles/h – – For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". For the protection of motor starters against short circuits, see "Coordination with short-circuit protection devices". Conductors with preparation. Max. connection bar width 50 mm. Max. connection bar width 100 mm. 1SFC101110C0201 - Rev. C (1) (2) (3) (4) (5) at 440 V at 690 V Ie / AC-1 Ie / AC-3 AC-1 AC-3 AC-2, AC-4 800 A 4600 A 4400 A 3100 A 2500 A 840 A ABB | 5/123 AF09 ... AF38 3-pole contactors Technical data Main pole - Utilization characteristics according to UL / NEMA / CSA Contactor types Standards Max. operational voltage NEMA size NEMA continuous amp rating NEMA maximum horse power ratings 1-phase, 60 Hz NEMA maximum horse power ratings 3-phase, 60 Hz Horse power rating UL / CSA maximum 3-phase motor rating Full load current (1) Horse power rating (1) AF26 AF30 AF38 1 27 A – – 115 V AC 230 V AC 1/3 hp 1 hp 1 hp 2 hp 2 hp 3 hp 200 V AC 230 V AC 460 V AC 575 V AC 1-1/2 hp 1-1/2 hp 2 hp 2 hp 3 3 5 5 7-1/2 hp 7-1/2 hp 10 hp 10 hp 25 A AWG 10 28 A AWG 10 30 A AWG 10 45 A AWG 8 50 A AWG 8 50 A AWG 8 120 V AC 240 V AC 120 V AC 240 V AC 13.8 A 10 A 3/4 hp 1-1/2 hp 16 A 12 A 1 hp 2 hp 20 A 17 A 1-1/2 hp 3 hp 24 A 17 A 2 hp 3 hp 24 A 28 A 2 hp 5 hp 24 A 28 A 2 hp 5 hp 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC 7.8 A 6.8 A 7.6 A 9A 2 hp 2 hp 5 hp 7-1/2 hp 11 A 9.6 A 11 A 11 A 3 hp 3 hp 7-1/2 hp 10 hp 17.5 A 15.2 A 14 A 17 A 5 hp 5 hp 10 hp 15 hp 25.3 A 22 A 21 A 22 A 7-1/2 hp 7-1/2 hp 15 hp 20 hp 32.2 A 28 A 27 A 27 A (2) 10 hp 10 hp 20 hp 25 hp (2) 32.2 A 28 A 34 A (3) 32 A (3) 10 hp 10 hp 25 hp (3) 30 hp (3) 100 kA 30 A J 30 A 60 A 60 A 100 A 100 A Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded High fault current Fuse rating Fuse type, 600 V Max. electrical switching frequency For general use For motor use hp hp hp hp 600 cycles/h 1200 cycles/h (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see “Motor rated operational powers and currents”. (2) For contactors produced since week 49-2011. (3) For contactors produced since week 36-2014. General technical data AC / DC operated Contactor types Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Electromagnetic compatibility Ambient air temperature close to contactor Operation Fitted with thermal overload relay Without thermal overload relay Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency Shock withstand acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 C1 A A B1 B2 C2 Vibration withstand acc. to IEC 60068-2-6 5/124 | ABB Shock direction A B1 B2 C1 C2 AF09 AF12 AF16 AF26 AF30 AF38 690 V 600 V 6 kV Devices complying with IEC 60947-1 / EN 60947-1 - Environment A -25...+60 °C -40...+70 °C -60...+80 °C Category B according to IEC 60947-1 Annex Q 3000 m 10 millions operating cycles 3600 cycles/h 1/2 sinusoidal shock for 11 ms: no change in contact position, closed or open position 30 g 25 g closed position / 5 g open position 15 g 25 g 25 g 5...300 Hz 4 g closed position / 2 g open position 1SBC101426S0201 - Rev. B 5 UL / CSA general use rating 600 V AC With conductor cross-sectional area UL / CSA maximum 1-phase motor rating Full load current AF09 AF12 AF16 UL 508, CSA C22.2 N°60947-4-1 600 V 00 0 – Thermal current 9 A 18 A AC / DC operated AF40 ... AF96 3-pole contactors Technical data Main pole - Utilization characteristics according to UL / NEMA / CSA Contactor types Standards Maximum operational voltage NEMA size NEMA continuous amp rating NEMA maximum horse power ratings 1-phase, 60 Hz NEMA maximum horse power ratings 3-phase, 60 Hz UL / CSA general use rating 600 V AC With conductor cross-sectional area UL / CSA maximum 1-phase motor rating Full load current Horse power rating UL / CSA maximum 3-phase motor rating Full load current (1) Horse power rating (1) AF40 AF52 AF65 UL 60947-4-1, CSA C22.2 N°60947-4-1 600 V 2 Thermal current 45 A - AC / DC operated AF80 AF96 3 90 A - 115 V AC 230 V AC 3 hp 7.5 hp - - - 200 V AC 230 V AC 460 V AC 575 V AC 10 15 25 25 - - 25 30 50 50 60 A AWG 6 80 A AWG 4 90 A AWG 3 105 A AWG 2 115 A AWG 2 34 A 40 A 3 hp 7-1/2 hp 34 A 50 A 3 hp 10 hp 56 A 68 A 5 hp 15 hp 80 A 68 A 7-1/2 hp 15 hp 80 A 88 A 7-1/2 hp 20 hp 32.2 A 42 A 40 A 41 A 10 hp 15 hp 30 hp 40 hp 48.3 A 54 A 52 A 52 A 15 hp 20 hp 40 hp 50 hp 62.1 A 68 A 65 A 62 A 20 hp 25 hp 50 hp 60 hp 78.2 A 80 A 77 A 77 A 25 hp 30 hp 60 hp 75 hp 92 80 77 77 30 30 60 75 100 kA 150 A J 150 A 150 A 200 A 200 A 120 V AC 240 V AC 120 V AC 240 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded High fault current Fuse rating Fuse type, 600 V Maximum electrical switching frequency For general use For motor use hp hp hp hp hp hp hp hp - 5 A A A A hp hp hp hp 600 cycles/h 1200 cycles/h (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". General technical data C1 A A B1 B2 C2 Vibration withstand acc. to IEC 60068-2-6 Shock direction A B1 B2 C1 C2 AF40 AF52 AF65 AF80 AF96 690 V 1000 V 600 V 6 kV 8 kV Devices complying with IEC 60947-1 / EN 60947-1 - Environment A and B -25...+60 °C -40...+70 °C -60...+80 °C Category B according to IEC 60947-1 Annex Q 3000 m 10 millions operating cycles 3600 cycles/h 1/2 sinusoidal shock for 11 ms: no change in contact position, closed or open position 25 g 25 g closed position / 5 g open position 15 g 25 g 25 g 5...300 Hz 3 g closed position / 3 g open position 1SBC101744S0201 - Rev. A AC / DC operated Contactor types Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Electromagnetic compatibility Ambient air temperature close to contactor Operation Fitted with thermal overload relay Without thermal overload relay Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Maximum switching frequency Shock withstand acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 ABB | 5/125 AF116 ... AF370 3-pole contactors Technical data Main pole - Utilization characteristics according to UL / NEMA / CSA Contactor types Standards Maximum operational voltage NEMA size NEMA continuous amp rating NEMA maximum horse power ratings 1-phase, 60 Hz NEMA maximum horse power ratings 3-phase, 60 Hz Horse power rating UL / CSA maximum 3-phase motor rating Full load current (1) Horse power rating (1) AF190 AF205 60947-1 / 60947-4-1A AF265 AF305 AF370 — — — — 5 270 A — — — — 115 V AC 230 V AC — — — — — — — — — — — — — — — — 200 V AC 230 V AC 460 V AC 575 V AC — — — — 40 hp 50hp 100 hp 100 hp — — — — — — — — — — — — 75 hp 100 hp 200 hp 200 hp — — — — — — — — 160 A AWG 2/0 200 A AWG 3/0 200 A AWG 3/0 250 A MCM 250 300 A 350 A MCM 350 (2) MCM 500 400 A 2//AWG 3/0 520 A 2//MCM 300 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 92 A 104 A 96 A 99 A 30 hp 40 hp 75 hp 100 hp 120 A 130 A 124 A 125 A 40 hp 50 hp 100 hp 125 hp 120 A 130 A 124 A 125 A 40 hp 50 hp 100 hp 125 hp 150 A 154 A 156 A 144 A 50 hp 60 hp 125 hp 150 hp 177 A 192 A 180 A 192 A 60 hp 75 hp 150 hp 200 hp 221 A 248 A 240 A 242 A 75 hp 100 hp 200 hp 250 hp 285 312 302 289 100 125 250 300 100 kA 225 A J 250 A 250 A 450 A 400 A 500 A 600 A 120 V AC 240 V AC 120 V AC 240 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded High fault current Fuse rating Fuse type, 600 V Maximum electrical switching frequency For general use For motor use A A A A hp hp hp hp 359 360 361 336 125 150 300 350 A A A A hp hp hp hp 800 A 300 cycles/h 300 cycles/h (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". (2) For conductor cross-sectional area above MCM 300 use terminal enlargements LW205. General technical data AC / DC operated Contactor types Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Electromagnetic compatibility Ambient air temperature close to contactor Operation Fitted with thermal overload relay Without thermal overload relay Storage Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Maximum switching frequency AF116 AF140 AF146 AF190 AF205 AF265 AF305 AF370 1000 V 600 V 8 kV AF contactors comply with IEC 60947-1 / EN 60947-1 - Environment A -25 to +55 °C -40 to +70 °C -40 to +70 °C 3000 m 5 million operating cycles 300 cycles/h 1SFC101109C0201 5 UL / CSA general use rating 600 V AC With conductor cross-sectional area UL / CSA maximum 1-phase motor rating Full load current AF116 AF140 AF146 UL 60947-1 / 60947-4-1A and CSA 600V — 4 — Thermal current — 135 A — AC / DC operated 5/126 | ABB AF400 ... AF2650 3-pole contactors Technical data Main pole - Utilization characteristics according to UL / NEMA / CSA Contactor types Standards Maximum operational voltage NEMA size NEMA maximum horse power ratings 1-phase, 60 Hz AC / DC operated NEMA maximum horse power ratings 3-phase, 60 Hz UL / CSA general use rating 1000 V AC UL / CSA maximum 1-phase motor rating Full load current Horse power rating UL / CSA maximum 3-phase motor rating Full load current (1) Horse power rating (1) AF400 AF460 AF580 UL 508, CSA C22.2 N°14 600 V – 6 – AF750 AF1250 AF1350 AF1650 AF2050 AF2650 7 1000 V – 8 – – – – – – – 300 hp 600 hp 600 hp – – – – – 450 hp 900 hp 900 hp – – – – – – – – 115 V AC 230 V AC – – 200 V AC 230 V AC 460 V AC 575 V AC – – – – 150 200 400 400 550 A 650 A 750 A 900 A 1210 A 1350 A 1650 A 2100 A 2700 A – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 358.8 A 360 A 414 A 382 A 125 hp 150 hp 350 hp 400 hp 414 480 477 472 150 200 400 500 692.3 A 722 A 722 A 672 A 250 hp 300 hp 600 hp 700 hp – – – – – – – – 954 A 954 A 954 A 944 A – 400 A 800 A 1000 A 1030 A 1030 A 1030 A 1050 A – 450 hp 900 hp 1150 hp – – – – – – – – – – – – – – – – 120 V AC 240 V AC 120 V AC 240 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded Fuse rating Fuse type, 600 V Maximum electrical switching frequency For general use For motor use hp hp hp hp A A A A hp hp hp hp 1000 A L 552 604 590 578 200 250 500 600 A A A A hp hp hp hp 1200 A 5 Please consult us for coordination with circuit-breaker 300 cycles/h 300 cycles/h 60 cycles/h 60 cycles/h 15 cycles/h – (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see “Motor rated operational powers and currents”. General technical data AC / DC operated Contactor types Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Electromagnetic compatibility Ambient air temperature close to contactor Operation Fitted with electronic overload relay Without electronic overload relay Storage Maximum operating altitude (without derating) Mechanical durability Number of operating cycles AF400 Max. switching frequency Shock withstand acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 300 cycles/h A ABB A B1 B2 C2 Shock direction A B1 B2 C1 C2 AF580 AF750 AF1250 AF1350 AF1650 AF2050 AF2650 1000 V 600 V 1000 V 8 kV AF contactors complying with IEC 60947-1 / EN 60947-1 - Environment A -25 to +70 °C -40 to +70 °C -40 to +70 °C 3000 m 3 millions operating cycles 0.5 million operating cycles 0.3 million operating cycles 60 cycles/h 1/2 sinusoidal shock for 30 ms: no change in contact position, closed or open position 5g – 5g – 5g – 5g – 5g – 1SFC101111C0201 - Rev. B1 C1 AF460 ABB | 5/127 AF09 ... AF38 3-pole contactors Technical data Magnet system characteristics Contactor types Coil operating limits acc. to IEC 60947-4-1 AC / DC operated AC supply DC supply AC control voltage 50/60 Hz Rated control circuit voltage Uc Coil consumption DC control voltage Rated control circuit voltage Uc Coil consumption PLC-output control Drop-out voltage Voltage sag immunity acc. to SEMI F47-0706 Dips withstand -20 °C ≤ θ ≤ +60 °C Operating time Between coil energization and: Between coil de-energization and: Average pull-in value Average holding value AF26 AF30 AF38 At θ ≤ 60 °C 0.85 x Uc min...1.1 x Uc max. At θ ≤ 70 °C (AF) 0.85 x Uc min...Uc max. - (AF..Z) 0.85 x Uc min...1.1 x Uc max. 24...500 V AC (AF) 50 VA - (AF..Z) 16 VA (AF) 2.2 VA / 2 W - (AF..Z) 1.7 VA / 1.5 W 12...500 V DC (AF) 50 W - (AF..Z) 12...16 W (AF) 2 W - (AF..Z) 1.7 W (AF..Z) ≥ 500 mA 24 V DC ≤ 60 % of Uc min. (AF..Z) conditions of use on request (AF..Z) 22 ms average for Uc ≥ 24 V 50/60 Hz or Uc ≥ 20 V DC N.O. contact closing N.C. contact opening N.O. contact opening N.C. contact closing 40...95 38...90 11...95 13...98 ms ms ms ms Mounting characteristics and conditions for use Contactor types Mounting positions AC / DC operated AF09 AF12 Pos. 2 +30° AF16 AF26 AF30 AF38 -30° Pos. 4 Pos. 3 Pos. 1 Pos. 1 ± 30° Pos. 5 Max. N.C. built-in and add-on N.C. auxiliary contacts: see accessory fitting details for a 3-pole contactor AF09 ... AF38 Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) The contactors can be assembled side by side 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally 1SBC101427S0201 - Rev. A 5 Average pull-in value Average holding value AF09 AF12 AF16 At θ ≤ 60 °C 0.85 x Uc min...1.1 x Uc max. At θ ≤ 70 °C 0.85 x Uc min...Uc max. 5/128 | ABB AF40 ... AF96 3-pole contactors Technical data Magnet system characteristics Contactor types Coil operating limits acc. to IEC 60947-4-1 AC control voltage 50/60 Hz Rated control circuit voltage Uc Coil consumption DC control voltage Rated control circuit voltage Uc Coil consumption PLC-output control Drop-out voltage Voltage sag immunity acc. to SEMI F47-0706 Dips withstand -20 °C ≤ θ ≤ +60°C Operating time Between coil energization and: Between coil de-energization and: AC / DC operated AC supply DC supply AF40 AF52 AF65 At θ ≤ 70 °C 0.85 x Uc min...1.1 x Uc max. At θ ≤ 70 °C 0.85 x Uc min...1.1 x Uc max. AF80 AF96 24...500 V AC Average pull-in value 25 VA Average holding value 4 VA / 2 W Average pull-in value Average holding value 40 VA 20...500 V DC 25 W 2W ≤ 60 % of Uc min. 40 W conditions of use on request 5 24 ms average N.O. contact closing N.C. contact opening N.O. contact opening N.C. contact closing 42...100 ms 38...95 ms 17...100 ms 19...105 ms Mounting characteristics and conditions for use Contactor types Mounting positions AC / DC operated AF40 AF52 Pos. 2 +30° AF65 AF80 AF96 -30° Pos. 4 Pos. 3 Pos. 1 Pos. 1 ± 30° Pos. 5 Max. N.C. built-in and add-on N.C. auxiliary contacts: see accessory fitting details for a 3-pole contactor AF40 ... AF96 The contactors can be assembled side by side 35 x 7.5 mm or 35 x 15 mm 2 x M4 or 2 x M6 screws placed diagonally 35 x 15 mm 1SBC101745S0201 Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) ABB | 5/129 AF116 ... AF370 3-pole contactors Technical data Magnet system characteristics Contactor types Coil operating limits acc. to IEC 60947-4-1 Rated control circuit voltage Uc Coil consumption AC control voltage 50/60 Hz 24...60 V AC 48...130 V AC 100...250 V AC 250...500 V AC DC control voltage 20...60 V DC 48...130 V DC 100...250 V DC 250...500 V DC Drop-out voltage Operating time Coil supply between A1 - A2 Between coil energization and: Between coil de-energization and: AF116 AF140 AF146 AF190 At θ ≤ 70 °C 0.85 x Uc min ... 1.1 x Uc max At θ ≤ 70 °C 0.80 x Uc min ... 1.1 x Uc max 24...500 V AC, 20...500 V DC AF205 AF265 Average pull-in value Average holding value Average pull-in value Average holding value Average pull-in value Average holding value Average pull-in value Average holding value 225 VA 5.5 VA 170 VA 4 VA 130 VA 6 VA 205 VA 16 VA 165 VA 6 VA 175 VA 4 VA 220 VA 7 VA 185 VA 16 VA 475 VA 8.5 VA 340 VA 17 VA 385 VA 17.5 VA 420 VA 21 VA Average pull-in value Average holding value Average pull-in value Average holding value Average pull-in value Average holding value Average pull-in value Average holding value 210 W 2.5 W 130 W 2.5 W 135 W 3W 205 W 4W 55 % of Uc min 205 W 2.5 W 130 W 2.5 W 190 W 2.5 W 190 W 4W 400 W 3.5 W 360 W 2.5 W 410 W 4.5 W 600 W 4.7 W 20...55 ms 40..70 ms 25...60 ms 45...80 ms 30...60 ms 45...80 ms N.O. contact closing N.O. contact opening AF305 AF370 AF305 AF370 Mounting characteristics and conditions for use Contactor types Mounting positions AC / DC operated AF116 AF140 Pos. 2 AF146 +30° AF190 AF205 AF265 -30° Pos. 4 Pos. 3 Pos. 1 Pos. 1 ± 30° Pos. 5 Pos. 6 Max. add-on N.O. or N.C. auxiliary contacts: see accessory fitting details for 3-pole contactor AF116 ... AF370 Mounting distances Fixing On rail acc. to IEC 60715, EN 60715 By screws (not supplied) The contactors can be assembled side by side – 4 x M5 1SFC101112C0201 - Rev. A 5 AC / DC operated AC supply DC supply 5/130 | ABB AF400 ... AF2650 3-pole contactors Technical data Magnet system characteristics Contactor types Coil operating limits acc. to IEC 60947-4-1 Rated control circuit voltage Uc Coil consumption AC control voltage 50/60 Hz 24...60 V AC 48...130 V AC 100...250 V AC 250 … 500 V AC DC control voltage 20...60 V DC 48...130 V DC 100...250 V DC 250 … 500 V DC Drop-out voltage Voltage sag immunity acc. to SEMI F47 Dips withstand Operating time Coil supply between A1 - A2 Between coil energization and: Between coil de-energization and: Control input for PLC's Between coil energization and: Between coil de-energization and: AC / DC operated AC supply DC supply AF400 AF460 AF580 AF750 At θ ≤ 70 °C 0.85 x Uc min ... 1.1 x Uc max At θ ≤ 70 °C 0.80 x Uc min ... 1.1 x Uc max 24...500 V AC, 20...500 V DC AF1250 AF1350 AF1650 AF2050 AF2650 100...250 V AC or DC Average pull-in value Average holding value Average pull-in value Average holding value Average pull-in value Average holding value Average pull-in value Average holding value 900 VA 12 VA 1215 VA 12 VA 955 VA 12 VA 950 VA 12 VA 780 VA 12 VA 1100 VA 12 VA 880 VA 12 VA 985 VA 12 VA 2450 VA 48 VA - Average pull-in value Average holding value Average pull-in value Average holding value Average pull-in value Average holding value Average pull-in value Average holding value 900 VA 785 VA 5 VA 5.5 VA 1150 VA 1020 VA 5 VA 5 VA 895 VA 880 VA 5 VA 5 VA 885 VA 910 VA 7.5 VA 7.5 VA 55 % of Uc min. Conditions of use on request 2290 VA 20.5 VA - 5 ≥ 20 ms Main contact closing Main contact opening 50…120 ms 33…70 ms Main contact closing Main contact opening 40…60 ms 10…30 ms 50…80 ms 35…55 ms 40...90 ms 40…65 ms 10…30 ms Mounting characteristics and conditions for use Contactor types Mounting positions AC / DC operated AF400 AF460 Pos. 2 AF580 +30° AF750 AF1250 AF1350 AF1650 AF2050 AF2650 -30° Pos. 4 Pos. 3 Pos. 1 Pos. 5 Pos. 6 – 4 x M5 4 x M6 4 x M8 1SFC101113C0201 - Rev. A Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) Pos. 1 ± 30° Max. add-on N.O. or N.C. auxiliary contacts: see accessory fitting details for 3-pole contactor AF400 ... AF2650 The contactors can be assembled side by side ABB | 5/131 AF09 ... AF38 3-pole contactors Technical data Connecting characteristics Contactor types Main terminals AC / DC operated AF09 AF12 AF16 AF26 AF30 AF38 Screw terminals with cable clamp Connection capacity (min. ... max.) Main conductors (poles) Rigid Solid (≤ 4 mm²) Stranded (≥ 6 mm²) Flexible with non insulated ferrule Flexible with insulated ferrule L 1...6 mm² 1...6 mm² 0.75...6 mm² 0.75...6 mm² 0.75...4 mm² 0.75...2.5 mm² 9.6 mm 2.5...10 mm² 2.5...10 mm² 1.5...10 mm² 1.5...10 mm² 1.5...10 mm² 1.5...4 mm² 12.5 mm AWG 16...10 10 mm 1.5 Nm / 13 lb.in AWG 14...8 14 mm 2.5 Nm / 22 lb.in 6 Connection capacity acc. to UL/CSA Stripping length Tightening torque Auxiliary conductors (built-in auxiliary terminals + coil terminals) Rigid solid 1 or 2 x Flexible with non insulated ferrule Flexible with insulated ferrule L Lugs 1x 2x 1x 2x 1x 2x L< 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 8 mm 6 1 or 2 x Connection capacity acc. to UL/CSA Stripping length Tightening torque Coil terminals Built-in auxiliary terminals Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Main terminals Coil terminals Built-in auxiliary terminals Screw terminals Main terminals Coil terminals Built-in auxiliary terminals AWG 18...14 10 mm 1.2 Nm / 11 lb.in 1.2 Nm / 11 lb.in IP20 IP20 IP20 Delivered in open position, screws of unused terminals must be tightened M3.5 M4 Screwdriver type Flat Ø 5.5 / Pozidriv 2 Flat Ø 6.5 / Pozidriv 2 M3.5 Screwdriver type Flat Ø 5.5 / Pozidriv 2 M3.5 Screwdriver type Flat Ø 5.5 / Pozidriv 2 1SBC101428S0201 - Rev. A 5 Bars or lugs 1x 2x 1x 2x 1x 2x L< 5/132 | ABB AF40 ... AF96 3-pole contactors Technical data Connecting characteristics Contactor types Main terminals AC / DC operated Connection capacity (min. ... max.) Main conductors (poles) Rigid Solid (≤ 4 mm²) Stranded (≥ 6 mm²) Flexible with non insulated ferrule Flexible with insulated ferrule L Bars or lugs AF40 AF52 AF65 AF80 AF96 Screw terminals with double connector 2 x (9.3 width x 7.9/10.3 depth) Screw terminals with double connector 2 x (12.4 width x 9.3/11.1 depth) 6...35 mm² 6...35 mm² 4...35 mm² 4...35 mm² 4...35 mm² 4...35 mm² 9.2 mm 6...70 mm² 6...50 mm² 6...50 mm² 6...50 mm² 6...50 mm² 6...50 mm² 12.2 mm 1 or 2 x AWG 10...2 16 mm 4 Nm / 35 lb.in AWG 6...1 17 mm 6 Nm / 53 lb.in 1x 2x 1x 2x 1x 2x L< 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 8 mm 1x 2x 1x 2x 1x 2x L< 5 6 Connection capacity acc. to UL/CSA Stripping length Tightening torque Auxiliary conductors (built-in auxiliary terminals + coil terminals) Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule L Lugs 6 1 or 2 x Connection capacity acc. to UL/CSA Stripping length Tightening torque Coil terminals Built-in auxiliary terminals Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Main terminals Coil terminals Built-in auxiliary terminals Screw terminals Main terminals Built-in auxiliary terminals 1.2 Nm / 11 lb.in 1.2 Nm / 11 lb.in IP10 IP20 IP20 Delivered in open position, screws of unused terminals must be tightened M6 M8 Screwdriver type Flat Ø 6.5 / Pozidriv 2 Hexagon socket (s = 4 mm) M3.5 Screwdriver type Flat Ø 5.5 / Pozidriv 2 M3.5 Screwdriver type Flat Ø 5.5 / Pozidriv 2 1SBC101746S0201 Coil terminals AWG 18...14 10 mm ABB | 5/133 AF116 ... AF370 3-pole contactors Technical data Connecting characteristics AC / DC operated AF116 AF140 AF146 AF190 8 Nm – – – 1 x 10...70 mm² LD... included (1) 8 Nm 2 x 10...70 mm² LD... included (1) 1x 8 Nm 22 mm (.866 in) 6 mm (.236 in) LL... included 9 Nm / 80 lb.in 1 x AWG 6…3/0 LD... included (1) 8 Nm / 71 lb.in 2 x AWG 6…3/0 LD... included (1) 8 Nm / 71 lb.in Lugs W≤ Ø> Socket type Tightening torque Connection capacity acc. to UL / CSA Clamp type Tightening torque Connection capacity acc. to UL / CSA Clamp type Tightening torque Auxiliary conductors (coil terminals) Solid / stranded Flexible Flexible with non insulated ferrule Flexible with insulated ferrule l L Lugs 1x 2x 1x 2x 1x 2x 1x 2x L< l> 1 or 2 x Connection capacity acc. to UL / CSA Stripping length Tightening torque Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Main terminals Coil terminals Screw terminals Main terminals AF370 5 10 7 10...95 mm² LD... included (1) 8 Nm 2 x 10...95 mm² LD... included (1) 1x Tightening torque ø L AF305 19.5 5 ø 6.5 Tightening torque Al cable - Stranded Clamp type Tightening torque Cu cable - Flexible Clamp type Tightening torque Cu cable - Flexible Clamp type AF265 17.5 3 Connection capacity (min. ... max.) Main conductors (poles) Cu cable - Stranded Clamp type Tightening torque Cu cable - Stranded Clamp type 5 AF205 13 ø 8.5 ø 10.5 6...150 mm² 1SDA066917R1 14 Nm 50...120 mm² 1SFN074709R1000, LZ185-2C/120 16 Nm 95...185 mm² 1SDA054988R1 31 Nm 6...120 mm² 1SDA066917R1 14 Nm 50...95 mm² 1SFN074709R1000, LZ185-2C/120 16 Nm 24 mm (.945 in) 8 mm (.315 in) LL... included 18 Nm / 160 lb.in 6…300 MCM ATK185 (2) 34 Nm / 301 lb.in – – – 16...300 mm² 1SDA055016R1 25 Nm 70...185 mm² 1SCA022194R0890, OZXB4 22 Nm 185...240 mm² 1SDA055020R1 43 Nm 16...240 mm² 1SDA055016R1 25 Nm 70...185 mm² 1SCA022194R0890, OZXB4 22 Nm 32 mm (1.260 in) 10 mm (.394 in) LL... included 28 Nm / 248 lb.in 4…400 MCM ATK300 (2) 42 Nm / 372 lb.in 4…500 MCM ATK300/2 (2) 42 Nm / 372 lb.in M8 M10 14.3 Contactor types Main terminals Flat type 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 8 mm 3.5 mm AWG 18...14 9 mm 1.00 Nm / 9 lb.in IP00 IP20 M6 Screws and bolts Coil terminals (delivered in open position) M3.5 Screwdriver type Flat Ø 5.5 mm / Pozidriv 2 Screwdriver type 1SFC101114C0201 (1) LD... not included for AF116 ... AF146-30-..B. (2) Available in North America only. 5/134 | ABB AF400 ... AF2650 3-pole contactors Technical data Connecting characteristics Contactor types Main terminals Flat type AC / DC operated AF400 AF460 AF580 AF750 AF1250 AF1350 AF1650 AF2050 AF2650 80 10 (AF2050) 25 (AF2650) ø 12.5 AF580 AF750 40 AF2050 AF2650 17 ø 13 ø 6.5 40 27 10 30 ø 10.5 ø 6.5 6 80 AF1250 10 22.5 8 15.5 6 40 22.5 25 25 17 40 50 27 ø 13 AF1350 AF1650 Connection capacity (min. ... max.) Main conductors (poles) Cu cable - Stranded Clamp type Tightening torque Cu cable - Stranded Clamp type Tightening torque Al cable - Stranded Clamp type Tightening torque 2x 3x 2x 3x ø L Lugs Clamp type Tightening torque W≤ Ø> Tightening torque Connection capacity acc. to UL / CSA 2x Clamp type Tightening torque Connection capacity acc. to UL / CSA Clamp type 3x Tightening torque Auxiliary conductors (coil terminals) Solid / stranded Flexible Flexible with non insulated ferrule Flexible with insulated ferrule l L Lugs 1x 2x 1x 2x 1x 2x 1x 2x L≤ l> 1 or 2 x Connection capacity acc. to UL / CSA Tightening torque Recommended Max. Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Main terminals Coil terminals Screw terminals Main terminals 240 mm² – 1SDA013922R1 – 35 Nm – – 185 mm² – 1SDA013956R1 35 Nm 45 Nm 240 mm² – 1SDA013922R1 – 35 Nm – – 185 mm² – 1SDA013956R1 35 Nm 45 Nm 47 mm 50 mm 10 mm 12 mm 35 Nm / 310 Ib.in 45 Nm / 398 lb.in 250-500 MCM alt. 2/0 – AWG-400 MCM K6TH alt. ATK580 – 275 Ib.in 2/0 AWG-400 MCM K6TJ – 2/0 AWG-500 MCM ATK750/3 275 Ib.in 375 Ib.in 5 – – – – – – 2// 3 x 0.25 in bars, use LW1250 100 mm 4/0 AWG - 500 MCM 4//4 x 0.25 in K7TK K7TK ATK1350/4 375 Ib.in 1/0-750 MCM K8TL, K8TL, K8TM, K8TM, ATK1650/4 ATK1650/4, ATK1650/6 500 Ib.in bars – – – – 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 8 mm 3.7 mm AWG 18...14 1.00 Nm / 9 lb.in 1.20 Nm IP00 IP20 1SFC101115C0201 M10 M12 Screws and bolts Coil terminals (delivered in open position) M3.5 Screwdriver type Flat Ø 5.5 mm / Pozidriv 2 ABB | 5/135 AF09 ... AF96 3-pole contactors Technical data Built-in auxiliary contacts according to IEC Contactor types Rated operational voltage Ue max. Rated frequency (without derating) Conventional free air thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Non-overlapping time between N.O. and N.C. contacts Power dissipation per pole at 6 A Max. electrical switching frequency 24-127 V 50/60 Hz 220-240 V 50/60 Hz 400-440 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC 400 V DC 500 V DC 600 V DC for 1.0 s for 0.1 s AC-15 DC-13 Mechanically linked contacts acc. to annex L of IEC 60947-5-1 Mirror contacts acc. to annex F of IEC 60947-4-1 AF09 AF12 690 V 50 / 60 Hz 16 A AF16 AF26 AF30 AF38 AF40 AF52 AF65 AF80 AF96 6A 4A 3A 2A 2A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.27 A / 60 W 0.27 A / 68 W 0.15 A / 60 W 0.13 A / 65 W 0.1 A / 60 W 10 A 100 A 140 A 12 V / 3 mA 10-7 ≥ 2 ms 0.1 W 1200 cycles/h 900 cycles/h Built-in N.O. or N.C. auxiliary contacts and additional N.O. or N.C. auxiliary contacts (CA4, CAL4, CAT4 aux. contact blocks) are mechanically linked contacts. Built-in N.C. auxiliary contacts or additional N.C. auxiliary contacts (CA4, CAL4, CAT4 aux. contact blocks) are mirror contacts. Built-in auxiliary contacts according to UL / CSA Contactor types Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking AC / DC operated AF09 AF12 AF16 600 V AC, 600 V DC A600, Q600 10 A 7200 VA 720 VA 2.5 A 69 VA AF26 AF30 AF38 AF40 AF52 AF65 AF80 AF96 1SBC101445S0201 - Rev. A 5 Making capacity AC-15 Breaking capacity AC-15 Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 AC / DC operated 5/136 | ABB 3-pole contactors Electrical durability and utilization categories General Utilization categories determine the current making and breaking conditions relating to the characteristics of the loads to be controlled by the contactors. International standard IEC 60947-4-1 and European standard EN 60947-4-1 are the standards to be referred to. If Ic is the current to be broken by the contactor and Ie the rated operational current normally drawn by the load, then: – – Categories AC-1 and AC-3: Ic = Ie –– Category AC-2: Ic = 2.5 x Ie –– Category AC-4: Ic = 6 x Ie Generally speaking Ic = m x Ie where m is a multiple of the load operational current. On next pages, the curves corresponding to categories AC-1, AC-3 and AC-4 represent the electrical durability variation of standard contactors in relation to the breaking current Ic. Electrical durability is expressed in millions of operating cycles. 5 Curve utilization mode Electrical durability forecast and contactor selection for categories AC-1, AC-2, AC-3 or AC-4 • Note the characteristics of the load to be controlled: –– Operational voltage ........................................... Ue – – Current normally drawn . .................................... Ie (Ue / Ie / kW relation for motors, see "Motor rated operational powers and currents"). – – Utilization category ........................................... AC-1, AC-2, AC-3 or AC-4 – – Breaking current ............................................... Ic = Ie for AC-1 and for AC-3 ; Ic = 2.5 x Ie for AC-2 ; Ic = 6 x Ie for AC-4 • Define the number of operating cycles N required. • On the diagram corresponding to the operational category, select the contactor with the curve immediately above the intersection point (Ic ; N). Electrical durability forecast and contactor selection for mixed duty motor control: AC-3 (Ic = Ie) type switching off while "motor running" and, occasionally, AC-4 (Ic = 6 x Ie) type switching off while "motor accelerating" • Note the characteristics of the motor to be controlled: –– Operational voltage ....................................................... Ue – – Current normally drawn while "motor running" . ............... Ie (Ue / Ie / kW relation for motors, see "Motor rated operational powers and currents") – – Breaking current for AC-3 ............................................. Ic = Ie – – Breaking current for AC-4 while "motor accelerating"...... Ic = 6 x Ie – – Percentage of AC-4 operating cycles ............................. K (on the basis of the total number of operating cycles) • Define the total number of operating cycles N required. • Note the smallest contactor rating compatible for AC-3 (Ue / Ie) on Main pole utilization characteristic table (see “Technical data”). • For the selected contactor make a note of the following in relation to the voltage using diagram AC-3 in next pages: –– The number of operating cycles A for Ic = Ie (AC-3) –– The number of operating cycles B for Ic = 6 x Ie (AC-4) • Calculate the estimated number of cycles N’ (N’ is always below A) A N'= 1 + 0.01 K (A/B - 1) • If N' is too low in relation to the target N, calculate the estimated number of cycles for a higher contactor rating. 1SBC101314S0201 Case of uninterrupted duty For uninterrupted duty, some verifications of preventing maintenance are necessary to check the functionality of the concerned product (consult us). The combined effect of environmental conditions and the proper temperature of the product may require some disposals. As a matter of fact, for this duty, the use duration prevails over the number of operating cycles. ABB | 5/137 3-pole contactors Electrical durability Electrical durability for AC-1 utilization category - Ue ≤ 690 V Switching non-inductive or slightly inductive loads. The breaking current Ic for AC-1 is equal to the rated operational current of the load. Ambient temperature and maximum electrical switching frequency: see "Technical data". AF1250, AF1350, AF1650, AF2050: The electrical durability at the rated current is 50000 operating cycles. AF AF 40 AF 0 46 0 20 AF 5 2 AF 65 30 AF 5 37 0 AF AF 6 19 0 0 14 AF 6 11 14 AF AF ,A 80 65 AF 52 AF AF 58 AF 0 75 0 6 F9 8 40 F3 AF AF 26 AF 30 ,A 12 AF 16 09 AF AF Millions of operating cycles 10 5 3 9 7 5 3 1 2 9 7 5 3 1 1 0.5 0.3 9 7 5 3 1 0.2 1 3 5 7 9 0.1 1 2 3 5 10 3 5 7 9 20 1 3 5 7 9 1 59 1 30 26.5 50 100 3 5 7 9 200 1 3 579 300 1 5 9 500 1000 Breaking current Ic (A) Example: Ic / AC-1 = 26.5 A – Electrical durability required = 2 millions operating cycles. Using the AC-1 curves above select the AF26 contactor at intersection " " (26.5 A / 2 millions operating cycles). 1SBC101940S0201 5 5/138 | ABB 3-pole contactors Electrical durability AF1350, AF1650: The electrical durability at the rated current is 50000 operating cycles. AF 75 0 AF 14 AF 0, 19 AF 14 AF 0 6 2 AF 05 26 AF 5 30 AF 5 37 0 AF 4 AF 00 46 0 AF 58 0 AF 11 6 AF 52 AF 65 AF 80 , AF 40 AF 16 AF 26 AF 30 , AF 12 AF 09 AF 38 Millions of operating cycles AF 96 Electrical durability for AC-3 utilization category - Ue ≤ 440 V. Switching cage motors: starting and switching off running motors. The breaking current Ic for AC-3 is equal to the rated operational current Ie (Ie = motor full load current). Ambient temperature and maximum electrical switching frequency: see "Technical data". 10 5 3 5 9 7 5 3 1 2 1.8 9 7 5 3 1 1 0.5 0.3 1 3 5 7 9 1 3 5 7 9 1 3 5 7 9 1 3 5 7 9 1 5 9 1 5 9 1 3 5 7 9 1 3 579 0.2 2 3 5 10 20 30 50 55 100 200 300 500 1000 Breaking current Ic (A) 1SBC101941S0201 Example: Motor power 30 kW for AC-3 - Ue = 400 V and Ie = 55 A utilization – Electrical durability required = 1.8 million operating cycles. For AC-3: Ic = Ie. Select the AF65 contactor at intersection " " (55 A / 1.8 million operating cycles) on the curves (AC-3 - Ue ≤ 440 V). ABB | 5/139 3-pole contactors Electrical durability Electrical durability for AC-3 utilization category - 440 V < Ue ≤ 690 V. Switching cage motors: starting and switching off running motors. The breaking current Ic for AC-3 is equal to the rated operational current Ie (Ie = motor full load current). Ambient temperature and maximum electrical switching frequency: see "Technical data". AF1350, AF1650: The electrical durability at the rated current is 50000 operating cycles. AF AF 37 40 0 AF 0 46 AF 0 58 AF 0 75 0 11 AF 6 14 AF 0 14 6 AF 19 AF 0 20 AF 5 26 AF 5 30 5 AF 5 AF 2 65 AF AF 80 96 AF 40 AF 26 A AF F30 38 AF 1 AF 2 16 AF AF 09 Millions of operating cycles 10 5 5 3 9 7 5 3 1 2 9 7 1.5 5 3 1 1 0.5 0.2 1 1 3 5 7 9 2 3 5 10 3 5 7 9 20 1 3 5 7 9 1 5 9 1 3 5 7 9 0.3 1 1 3 579 30 50 3 5 100 7 9 200 140 1 3 579 300 500 1000 Breaking current Ic (A) 1SBC101955S0201 Example: Motor power 132 kW for AC-3 - Ue = 660 V and Ie = 140 A utilization – Electrical durability required = 1.5 million operating cycles. For AC-3: Ic = Ie. Select the AF265 contactor at intersection " " (140 A / 1.5 million operating cycles) on the curves (AC-3 - 440 V < Ue ≤ 690 V). 5/140 | ABB AF09 ... AF96 3-pole contactors Terminal marking and positioning AF09 ... AF96 contactors - AC / DC operated Standard devices without addition of auxiliary contacts 2T1 4T2 6T3 A1 A2 A1 A2 A1 A2 1L1 3L2 5L3 13 1L1 3L2 5L3 21 NO NC NO NC 14 2T1 4T2 6T3 A1 A2 22 2T1 A1 A2 AF09 ... AF16..-30-10 3L2 1L1 4T2 A1 1L1 3L2 5L3 13 NO A2 2T1 4T2 6T3 NO 14 6T3 AF26 ... AF96..-30-00 A1 A2 1L1 3L2 5L3 5L3 A1 A2 AF09 ... AF16..-30-01 A1 A2 3L2 1L1 AF09 ... AF16..-30-10 13 21 31 43 13 21 31 43 NO NO 3L2 1L1 13 1L1 3L2 5L3 21 NC A2 2T1 4T2 6T3 NC 22 AF09 ... AF16..-30-01 A1 1L1 3L2 5L3 A2 2T1 4T2 6T3 AF26 ... AF96..-30-00 A1 1L1 3L2 5L3 13 NO 21 NC 31 NC 43 NO A1 1L1 3L2 5L3 13 NO 21 NC A2 2T1 4T2 6T3 NO 14 NC 22 NC 32 NO 44 A2 2T1 4T2 6T3 NO 14 NC 22 5 A1 A2 A1 A2 5L3 A1 NO 5L3 3L2 1L1 5L3 13X 21X 21 AF09 ... AF96..-30-22 AF26 ... AF38..-30-11 NC NC NC NO NC NC NO NO 14 22 32 44 14 22 32 44 2T1 2T1 4T2 6T3 4T2 14 6T3 2T1 A1 A2 A1 A2 AF09 ... AF16..-30-22 NC NC 22X 14X 22 4T2 NO 6T3 2T1 AF26 ... AF96..-30-22 4T2 AF26 ... AF38..-30-11 1L1 3L2 5L3 13X 21X NO NC A2 2T1 4T2 6T3 NO NC 14X 22X 6T3 A1 A2 A1 A2 A1 AF40 ... AF96..-30-11 AF40 ... AF96..-30-11 Other possible contact combinations with auxiliary contacts added by the user A1 A2 1L1 3L2 5L3 NO 21 A1 A2 A1 A2 13 13 1L1 NO 2- = NC 22 + 2- NO 2T1 4T2 6T3 3L2 -1 13 21 NC NO NC -2 14 22 A1 A2 5L3 1- 2T1 4T2 6T3 14 14 2T1 A1 A2 4T2 6T3 13 1L1 3L2 5L3 NO 13 NO A1 21 33 + 22 34 A2 NC NO 22 34 A2 NO 2T1 4T2 6T3 2T1 4T2 6T3 14 NC NC NO NO NO 13X 21X = NC 2T1 4T2 6T3 A1 A2 13 NO 21 NC NC A2 2T1 4T2 6T3 NO 14 NC 22 Combination 11 -2 1L1 3L2 5L3 NO 14 A1 1L1 3L2 5L3 13 NO 21 NC 33 NO A2 2T1 4T2 6T3 NO 14 NC 22 NO 34 13 NO = 21 31 43 53 + NC NC NO NO 22 32 44 54 Combination 21 A1 1L1 3L2 5L3 13 NO 21 NC 31 NC 43 53 NO NO A2 2T1 4T2 6T3 NO 14 NC 22 NC 32 NO NO 44 54 NO 2T1 4T2 6T3 14 A1 A2 Combination 32 = AF09 ... AF16..-30-10 + CA4-22M Combination 32 A1 A2 13 NC NO 5L3 6T3 22 32 44 54 2T1 4T2 6T3 A1 A2 22X 14X -1 + A1 A2 13 NO Combination 21 = AF09 ... AF16..-30-10 + CAT4-11M 13X 21X 4T2 NO NO 14 1L1 3L2 5L3 NO -4 2- 21 31 43 53 A1 A2 NO 3L2 Combination 11 = AF26 ... AF96..-30-00 + CA4-10 + CA4-01 1L1 3L2 5L3 = NO 1L1 A1 A2 A1 A2 NC + 2T1 A1 A2 Combination 11 = AF09 ... AF16..-30-10 + CA4-01 A1 21 33 -3 2- = 1- A1 5L3 NO A1 A2 1L1 3L2 5L3 3L2 1L1 NC NC NO 22X 14X 14 NO 1L1 3L2 5L3 13 NO + A1 1L1 3L2 5L3 13 13X 21X NO NO NC A2 2T1 4T2 6T3 NO NO NC 14 14X 22X NO 2T1 4T2 6T3 14 A1 A2 Combination 21 = CAL4-11 + AF09 ... AF16..-30-10 Combination 21 Note: Only AF..Z contactor with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole ABB | 5/141 1SBC101463S0201 - Rev. A 1L1 3L2 5L3 AF116 ... AF370 3-pole contactors Terminal marking and positioning AF116 ... AF370 contactors - AC / DC operated Standard devices without addition of auxiliary contacts 3L2 1L1 A1 A2 2T1 4T2 6T3 AF116 ... AF370-30-00 A1 1L1 3L2 5L3 A2 2T1 4T2 6T3 AF116 ... AF370-30-00 Standard devices with factory mounted auxiliary contacts 3L2 1L1 A1 NO 13X 5L3 A2 3L2 1L1 A1 NO 13X 5L3 A2 43X NO NC 21X 31X NC NC 22X NC 22X 32X NC NO 14X NO 14X 44X NO NC 21X 2T1 4T2 AF116 ... AF370-30-11 6T3 2T1 4T2 AF116 ... AF370-30-22 A1 1L1 3L2 5L3 A2 2T1 4T2 6T3 13X NO 21X NC NO 14X NC 22X A1 1L1 3L2 5L3 13X NO 21X NC 31X NC 43X NO A2 2T1 4T2 6T3 NO 14X NC 22X NC 32X NO 44X 6T3 AF116 ... AF370-30-11 AF116 ... AF370-30-22 1SFC101130C0201 5 5L3 5/142 | ABB AF400 ... AF2650 3-pole contactors Terminal marking and positioning AF400 ... AF1250 contactors - AC / DC operated Standard devices with factory mounted auxiliary contacts 1L1 3L2 5L3 1L1 3L2 5L3 Control with logic signal X5 Logic signal 1 2 3 A2 0V X5 Supply voltage 24V + A1 ON 1 OFF OFF_N 2 NO 13X NO 13X 43X NO NC 21X NC 21X 31X NC NC 22X NC 22X 32X NC NO 14X NO 14X 44X NO 4T2 2T1 6T3 2T1 AF400 ... AF1250-30-11 4T2 AF400 ... AF1250-30-11, AF400 ... AF1250-30-22 6T3 A1 1L1 3L2 5L3 A2 2T1 4T2 6T3 13X NO 21X NC NO 14X NC 22X AF400 ... AF1250-30-11 AF1350 ... AF2650 contactors - AC / DC operated Standard devices with factory mounted auxiliary contacts 3L2 COMMON 3 AF400 ... AF1250-30-22 1L1 A2 Contactor X5 ON A1 1L1 3L2 5L3 13X NO 21X NC 31X NC 43X NO A2 2T1 4T2 6T3 NO 14X NC 22X NC 32X NO 44X AF400 ... AF1250-30-22 Wiring diagrams when used with transistor output 5L3 0V Supply voltage 24V + A1 1 A2 OFF A2 1L1 3L2 2T1 4T2 5L3 6T3 13X 21X NO NC NO 14X NC 22X 2 3 E2139D3 A1 A2 Contactor X5 ON A1 5 ON OFF_N COMMON AF1350, AF1650 AF1350, AF1650-30-11 AF1350 ... AF2650-30-11 NO 13X NC 21X when used with transistor output NO 22X NO 14X 0V 2T1 4T2 3L2 5L3 6T3 A2 AF1350 ... AF2650-30-11 1L1 2T1 4T2 6T3 13X 21X 31X 43X NO NC NC NO NO NC NC NO 14X 22X 32X 44X + A1 X5 ON E2138D3 A1 Supply voltage 24V 1 OFF 2 3 AF1350,...AF1650-30-22 AF1350 AF2650-30-22 A2 Contactor ON OFF_N COMMON AF1350, AF1650 1SFC101131C0201 1 2 3 A1 E1689D2G Logic signal A2 E2693DG A1 ABB | 5/143 AF09, AF12, AF16 3-pole contactors 5.5 0.22" 5.5 0.22" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 6 0.24" 80 3.15" 80 3.15" 6 0.24" 5.5 0.22" 35 1.38" ø 4.2 0.17" 5.5 0.22" 10 0.39" 35 1.38" 2x ø 4.2 0.17" M4 8-32 UNC 2x M4 8-32 UNC 70 2.76" 71 2.80" 5 0.20" 77 3.03" 71 2.80" 70 2.76" 77 3.03" 5 0.20" 45 1.77" 60 2.36" 45 1.77" mm, inches 60 2.36" Main dimensions 10 0.39" 5 0.20" 5 0.20" AF09, AF12, AF16 AF09, AF12, AF16 5 110.5 4.35" 71 2.80" 45 1.77" 77 3.03" 10 0.39" 12 0.47" 71 2.80" 80 3.15" 5.5 0.22" 35 mm EN/IEC 60715 6 0.24" 5.5 0.22" 43 1.69" 80 3.15" 35 mm EN/IEC 60715 6 0.24" 5.5 0.22" 45 1.77" 5.5 0.22" 10 0.39" AF09, AF12, AF16 + CA4, CC4 1-pole auxiliary contact block AF09, AF12, AF16 + CAL4-11 2-pole auxiliary contact block 102.5 4.04" 110.5 4.35" 71 2.80" 10 0.39" 45 1.77" 5.5 0.22" AF09, AF12, AF16 + CA4 4-pole auxiliary contact block 5.5 0.22" AF09, AF12, AF16 + CAT4 2-pole auxiliary contact and coil terminal block 133.5 5.26" 110.5 4.35" 5 0.20" 80 3.15" 70 2.76" 60 2.36" 5.5 0.22" 5 0.20" AF09, AF12, AF16..-30-22 Note: contactor lateral distance to grounded component 2 mm 0.08" min. 5/144 | ABB 10 0.39" 5.5 0.22" 1.1 0.04" 6 0.24" ø 4.2 0.17" 43 1.69" 35 mm EN/IEC 60715 80 3.15" 6 0.24" 5.5 0.22" 71 2.80" 2 x45 1.77" M4 8-32 UNC AF09, AF12, AF16 + TEF4 electronic timer 5.5 0.22" 1SBC101682S0201 - Rev. A 35 1.38" 40.5 1.59" 10 0.39" 35 mm EN/IEC 60715 71 2.80" 45 1.77" 10 0.39" 5.5 0.22" 35 mm EN/IEC 60715 80 3.15" 43 1.69" 80 3.15" 35 mm EN/IEC 60715 6 0.24" 5.5 0.22" 43 1.69" 71 2.80" 45 1.77" AF09, AF12, AF16 3-pole contactors Main dimensions mm, inches 102.5 4.04" 102.5 4.04" 90 90 3.54" 3.54" 71 71 2.80" 2.80" 10 10 0.39" 0.39" 2 x2 x M4M4 8-32 UNC 8-32 UNC 80 80 3.15" 3.15" 70 2.76" 70 2.76" 5 0.20" 5 0.20" 5.55.5 0.22" 0.22" 60 2.36" 60 2.36" 43 1.69" 43 1.69" ø 4.2 0.17" ø 4.2 0.17" AF09, AF12, AF16 + VEM4 mechanical and electrical interlock set 77 3.03" 5.5 0.22" 5 0.20" 2x M4 8-32 UNC 70 2.76" 5.5 0.22" ø 4.2 0.17" ø 4.2 0.17" 2x M4 8-32 UNC 70 2.76" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 156.1 6.15" 80 3.15" 6 0.24" 5.5 0.22" 5 35 1.38" 35 1.38" 60 2.36" 71 2.80" 60 2.36" 45 1.77" 10 5.5 0.22" 0.39" 71 2.80" 5 0.20" 77 3.03" 45 1.77" 5 0.20" 5 0.20" AF09, AF12, AF16 + VEM4 mechanical and electrical interlock set 5 0.20" 91.5 3.60" 91.5 3.60" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 5.55.5 0.22" 0.22" 10 0.39" 5 0.20" 6.2 0.24" AF09, AF12, AF16 + TF42, EF19 72.7 2.86" 76.8 3.02" AF09, AF12, AF16 + TF42 thermal overloard relay 77 3.03" 71 2.80" 45 1.77" 10 0.39" 35 mm EN/IEC 60715 152.4 6.00" 5.5 0.22" 5.5 0.22" 17.4 0.69" 73.3 2.89" 1SBC101682S0201 - Rev. A 76.8 3.02" AF09, AF12, AF16 3-pole contactors + EF19 electronic overload relay Note: contactor lateral distance to grounded component 2 mm 0.08" min. ABB | 5/145 AF26, AF30, AF38 3-pole contactors 5.5 0.22" 10 0.39" 10 0.39" 5 0.20" AF26, AF30, AF38 35 1.38" 2x ø 4.2 0.17" M4 8-32 UNC 2x M4 8-32 UNC 70 2.76" 5.5 0.22" 60 2.36" ø 4.2 0.17" 5 0.20" 35 1.38" 71 2.80" 5.5 0.22" 35 mm EN/IEC 60715 80 3.15" 35 mm EN/IEC 60715 6 0.24" 6 0.24" 5.5 0.22" 80 3.15" 77 3.03" 80 3.15" 45 1.77" 5 0.20" 86 3.39" 45 1.77" 70 2.76" mm, inches 60 2.36" Main dimensions 5 0.20" AF26, AF30, AF38 5 119.5 4.70" 45 1.77" 80 3.15" 86 3.39" 10 0.39" 12 0.47" 80 3.15" 45 1.77" 5.5 0.22" 80 3.15" 35 mm EN/IEC 60715 6 0.24" 5.5 0.22" 43 1.69" 80 3.15" 35 mm EN/IEC 60715 6 0.24" 5.5 0.22" 5.5 0.22" 10 0.39" AF26, AF30, AF38 + CAL4-11 2-pole auxiliary contact block AF26, AF30, AF38 + CA4, CC4 1-pole auxiliary contact block 119.5 4.70" 111.5 4.39" 10 0.39" 45 1.77" 80 3.15" 43 1.69" AF26, AF30, AF38 + CA4 4-pole auxiliary contact block 111.5 4.39" 142.5 5.61" 45 1.77" 10 0.39" 80 3.15" Note: contactor lateral distance to grounded component 2 mm 0.08" min. 5/146 | ABB 1.1 0.04" 35 mm EN/IEC 60715 80 3.15" 6 0.24" AF26, AF30, AF38..-30-11 AF26, AF30, AF38..-30-22 43 1.69" 35 mm EN/IEC 60715 6 0.24" 80 3.15" 5.5 0.22" 10 0.39" 5.5 0.22" 5.5 0.22" AF26, AF30, AF38 + TEF4 electronic timer 5.5 0.22" 1SBC101683S0201 - Rev. A 119.5 4.70" AF..-30-11 80 3.15" 5.5 0.22" AF26, AF30, AF38 + CAT4 2-pole auxiliary contact and coil terminal block AF..-30-22 45 1.77" 10 0.39" 5.5 0.22" 40.5 1.59" 80 3.15" 35 mm EN/IEC 60715 6 0.24" 5.5 0.22" 5.5 0.22" 80 3.15" 43 1.69" 80 3.15" 35 mm EN/IEC 60715 45 1.77" AF26, AF30, AF38 3-pole contactors Main dimensions mm, inches 111.5 111.54.39" 4.39" 90903.54" 3.54" 80803.15" 3.15" 10100.39" 0.39" 2 2x x M48-32 8-32UNC UNC M4 80803.15" 3.15" 5.5 5.50.22" 0.22" 70 2.76" 70 2.76" 5 0.20" 5 0.20" 60 2.36" 60 2.36" 43 1.69" 43 1.69" 91.5 3.60" 91.5 3.60" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 5.5 5.50.22" 0.22" ø ø4.2 4.20.17" 0.17" 5 0.20" 9.2 0.36" 5 2x M4 8-32 UNC 70 2.76" ø 4.2 0.17" 60 2.36" 5.5 0.22" 35 1.38" 210 x 0.39"UNC M4 8-32 70 2.76" 35 mm EN/IEC 60715 5.5 0.22" 158.9 6.26" 158.9 6.26" 35 mm EN/IEC 60715 5.5 0.22" 5 0.20" 86 3.39" 35 1.38" 10 80 3.15" 0.39" 5.5 0.22" ø 4.2 0.17" 45 3.15" 1.77" 80 60 2.36" 86 3.39" 45 1.77" AF26, AF30, AF38 + VEM4 mechanical and electrical interlock set 5 0.20" AF26, AF30, AF38 + VEM4 mechanical and electrical interlock set 5 50.20" 0.20" 5 0.20" 9.2 0.36" AF26, AF30, AF38 + TF42, EF19, EF45 75.7 2.98" 75.7 2.98" 79.8 3.14" 79.8 3.14" AF26, AF30, AF38 + TF42 thermal overload relay 86 3.39" 45 1.77" 80 3.15" 86 3.39" 10 0.39" 45 1.77" 80 3.15" 10 0.39" 35 mm EN/IEC 60715 5.5 0.22" 5.5 0.22" 5.5 0.22" 172.3 6.78" 35 mm EN/IEC 60715 155.2 6.11" 5.5 0.22" 20.4 0.80" 76.3 3.00" 82.5 3.25" 1SBC101683S0201 - Rev. A 79.8 3.14" AF26 3-pole contactors + EF19 electronic overload relay 86 3.39" AF26, AF30, AF38 3-pole contactors + EF45 electronic overload relay Note: contactor lateral distance to grounded component 2 mm 0.08" min. ABB | 5/147 AF40 ... AF65 3-pole contactors Main dimensions 111 4.37" 45 1.77" ø 6.4 0.25" 7 0.28" 6 0.24" 55 2.17" mm, inches 110 4.33" 4.6 0.18" 5.5 0.22" 10 0.39" 5 0.20" AF40, AF52, AF65 AF40, AF52, AF65 144 5.67" 111 4.37" 10 0.39" 12 0.47" 7 0.28" 111 4.37" 55 2.17" 7 0.28" 6 0.24" 6 0.24" 55 2.17" 5.5 0.22" 35 mm EN/IEC 60715 119.5 4.70" 43 1.69" 119.5 4.70" 35 mm EN/IEC 60715 5.5 0.22" 10 0.39" AF40, AF52, AF65 + CA4, CC4 1-pole auxiliary contact block AF40, AF52, AF65-30-00 + CAL4-11 2-pole auxiliary contact block AF40, AF52, AF65-30-11 144 5.67" 111 4.37" 136 5.35" 10 0.39" 111 4.37" 10 0.39" 7 0.28" 55 2.17" 7 0.28" AF40, AF52, AF65 + CA4 4-pole auxiliary contact block 43 1.69" 35 mm EN/IEC 60715 5.5 0.22" 119.5 4.70" 43 1.69" 5.5 0.22" AF40, AF52, AF65 + CAT4 2-pole auxiliary contact and coil terminal block 144 5.67" 167 6.57" 55 2.17" 7 0.28" AF40, AF52, AF65..-30-22 5/148 | ABB 111 4.37" 6 0.24" AF40, AF52, AF65 + TEF4 electronic timer 1.1 0.04" 35 mm EN/IEC 60715 119.5 4.70" 43 1.69" 35 mm EN/IEC 60715 5.5 0.22" 10 0.39" 7 0.28" 5.5 0.22" 40.5 1.59" 10 0.39" 6 0.24" 55 2.17" 111 4.37" 1SBC101731S0201 119.5 4.70" 35 mm EN/IEC 60715 6 0.24" 55 2.17" 119.5 4.70" 5 2x M4 8-32 UNC 100 3.94" 119.5 4.70" 35 mm EN/IEC 60715 ø 4.2 0.17" 2x M6 ¼-20 UNC AF40 ... AF65 3-pole contactors Main dimensions mm, inches 111 4.37" 110 4.33" M6 ¼-20 UNC 100 3.94" 6 0.24" 7 0.28" ø 4.2 0.17" 10 0.39" ø 6.4 0.25" AF40, AF52, AF65 + VM96-4 mechanical interlock unit 10 0.39" 55 2.17" 5 111 4.37" 4 0.16" 10 0.39" 7 0.28" 35 mm EN/IEC 60715 5.5 0.22" 237 9.33" 35 mm EN/IEC 60715 7 0.28" 208.5 8.21" 5 0.20" AF40, AF52, AF65 + VM96-4 mechanical interlock set 111 4.37" 55 2.17" 4.6 0.18" 5.5 0.22" 100 3.94" 110 4.33" 119.5 4.70" 35 x 15 mm EN/IEC 60715 M4 8-32 UNC 5.5 0.22" 5.4 0.21" 106.8 4.20" 110.6 4.35" AF40, AF52, AF65 + TF65 thermal overload relay 70 2.76" 106.8 4.20" 110.6 4.35" AF40, AF52, AF65 + EF65 electronic overload relay 45 1.77" ø 6.4 0.25" 4.6 0.18" 110 4.33" 2x M4 8-32 UNC 100 3.94" ø 4.2 0.17" 2x M6 ¼-20 UNC 5 0.20" 1SBC101731S0201 AF40, AF52, AF65 + TF65, EF65 ABB | 5/149 AF80 ... AF96 3-pole contactors Main dimensions mm, inches 60 2.36" 116 4.57" 70 2.76" ø 6.4 0.25" 2x M6 ¼-20 UNC 110 4.33" 4.6 0.18" 5.5 0.22" 100 3.94" 119.5 4.70" 35 x 15 mm EN/IEC 60715 6 0.24" 7 0.28" 10 0.39" 5 0.20" AF80, AF96 AF80, AF96 5 149 5.87" 116 4.57" 70 2.76" 10 12 0.47" 0.39" 116 4.57" 70 2.76" 7 0.28" 6 0.24" 6 0.24" 7 0.28" 5.5 0.22" 35 x 15 mm EN/IEC 60715 119.5 4.70" 43 1.69" 119.5 4.70" 35 x 15 mm EN/IEC 60715 5.5 0.22" 10 0.39" AF80, AF96-30-00 + CAL4-11 2-pole auxiliary contact block AF80, AF96-30-11 AF80, AF96 + CA4, CC4 1-pole auxiliary contact block 149 5.87" 116 4.57" 10 0.39" 7 0.28" 43 1.69" 119.5 4.70" 35 x 15 mm EN/IEC 60715 6 0.24" 70 2.76" 5.5 0.22" AF80, AF96 + CA4 4-pole auxiliary contact block 172 6.77" 149 5.87" 10 0.39" 5/150 | ABB AF80, AF96 + TEF4 electronic timer 5.5 0.22" 40.5 1.59" 1.1 0.04" 35 x 15 mm EN/IEC 60715 119.5 4.70" 43 1.69" 35 x 15 mm EN/IEC 60715 119.5 4.70" AF80, AF96..-30-22 5.5 0.22" 10 0.39" 7 0.28" 6 0.24" 7 0.28" 116 4.57" 70 2.76" 1SBC101732S0201 116 4.57" 6 0.24" 70 2.76" AF80 ... AF96 3-pole contactors Main dimensions mm, inches 116 4.57" 140 5.51" 7 0.28" M6 ¼-20 UNC 4.6 0.18" 5.5 0.22" 10 0.39" ø 6.4 0.25" AF80, AF96 + VM96-4 mechanical interlock unit 10 0.39" 5 10 0.39" 35 x 15 mm EN/IEC 60715 7 0.28" 5.5 0.22" 237 9.33" 35 x 15 mm EN/IEC 60715 116 4.57" 70 2.76" 7 0.28" 211 8.31" 5 0.20" AF80, AF96 + VM96-4 mechanical interlock set 116 4.57" 70 2.76" 100 3.94" 110 4.33" 119.5 4.70" 35 x 15 mm EN/IEC 60715 6 0.24" 130 5.12" 4 0.16" 5.5 0.22" 5.4 0.21" 106.8 4.20" 110.9 4.37" AF80, AF96 + TF96 thermal overload relay 60 2.36" 2x M6 ¼-20 UNC 4.6 0.18" 110 4.33" 110.6 4.35" AF80, AF96 + EF96 electronic overload relay 100 3.94" ø 6.4 0.25" 106.8 4.20" 5 0.20" 1SBC101732S0201 AF80, AF96 + TF96, EF96 ABB | 5/151 AF116, AF140, AF146 3-pole contactors Main dimensions mm, inches 3 0.12" 14.2 0.56" 20 0.79" 14.2 0.56" SECTION D-D 14.2 0.56" SECTION E-E E 30 1.18" 126 4.96" 90 3.54" D M4 8-32 UNC 100 3.94" 19.5 4.96" 150 5.91" 55.5 0.22" D 30 1.18" AF116, AF140, AF146-30-00 + CAL19 2-pole auxiliary contact block AF116, AF140, AF146-30-11 AF116, AF140, AF146-30-..(B) SECTION D-D 22.8 0.90" 3 0.12" 5.5 0.22" ø 6.5 0.26" 20 0.79" 23.8 0.94" 23.8 0.94" SECTION E-E E 90 3.54" D 30 1.18" AF116, AF140, AF146-30-00B + CAL19 2-pole auxiliary contact block AF116, AF140, AF146-30-11B 5/152 | ABB 1SFC101118C0201 55.5 2.18" D 126 4.96" 19.5 0.77" 10 0.39" 150 5.91" 5 10 0.39" AF116, AF140, AF146 3-pole contactors With built-in PLC interface (coil code 33, 34) Main dimensions mm, inches 3 0.12" 14.2 0.56" 20 0.79" 14.2 0.56" SECTION D-D 14.2 0.56" SECTION E-E E 10 0.39" 30 1.18" 142.5 5.61" 90 3.54" D M4 8-32 UNC 5 100 3.94" 19.5 4.96" 150 5.91" 55.5 0.22" D 30 1.18" AF116, AF140, AF146-30-00 + CAL19 2-pole auxiliary contact block AF116, AF140, AF146-30-11 AF116, AF140, AF146-30-..(B) SECTION D-D 22.8 0.90" 3 0.12" 5.5 0.22" ø 6.5 0.26" 20 0.79" 23.8 0.94" 23.8 0.94" SECTION E-E E 90 3.54" D 1SFC101118C0201 150 5.91" 55.5 2.18" D 142.5 5.61" 19.5 0.77" 10 0.39" 30 1.18" AF116, AF140, AF146-30-00B + CAL19 2-pole auxiliary contact block AF116, AF140, AF146-30-11B ABB | 5/153 180 7.09" 17 0.67" ø 6.4 0.25" 8 0.31" 13 0.51" 126 4.96" 3 0.12" 17 0.67" 126 4.96" 3 0.12" 30 1.18" AF116, AF140, AF146-30-11(B) + LW140(B) terminal enlargement 126 4.96" 8x 126 4.96" 30 1.18" 60 2.36" 30 1.18" M4 8-32 UNC AF116, AF140, AF146-30-11(B) + VM19 mechanical interlocking unit 1SFC101118C0201 AF116, AF140, AF146-30-11(B) + VM19 mechanical interlocking unit 7.5 0.3" 24 0.94" 90 3.54" ø 6 0.24" 226 8.90" 29.5 1.16" 228 8.98" 108 4.25" 15 0.59" 41 1.61" AF116, AF140, AF146-30-11 + LX140 terminal extension 180 7.09" 126 4.96" 3 0.12" 100 3.94" 30 1.18" 233 9.17" ø 6.4 0.25" AF..-30-11 13 0.51" 17 0.67" AF..-30-11B 90 3.54" 226 8.90" 5 mm, inches 8 0.31" 24 0.94" Main dimensions 150 5.91" 150 5.91" AF116, AF140, AF146 3-pole contactors 5/154 | ABB AF116, AF140, AF146 3-pole contactors Main dimensions mm, inches 126 4.96" 17 0.67" 30 1.18" 3 0.12" 4x M4 8-32 UNC 100 3.94" 90 3.54" 45 1.77" 259 10.20" 5 82.3 3.24" 6 0.24" 4x M5 10-24 UNC 37 1.46" 8 0.31" 50 1.97" AF116, AF140-30-11(B) + TF140 thermal overload relay AF116, AF140-30-11(B) + TF140 thermal overload relay 126 4.96" 17 0.67" 6x M4 8-32 UNC 3 0.12" 46 1.81" 270 10.63" 100 3.94" 90 3.54" 30 1.18" 21.5 105 4.13" AF116, AF140, AF146-30-11(B) + EF146 electronic overload relay 37 1.46" 1SFC101118C0201 94.7 3.73" 0.85" 2x M5 10-24 UNC AF116, AF140, AF146-30-11(B) + EF146 electronic overload relay ABB | 5/155 AF190, AF205 3-pole contactors Main dimensions mm, inches SECTION B-B 152 5.98" B 105 4.13" ø 8.5 0.33" 5 0.20" 35 1.38" 165 6.50" 196 7.72" 5 4X M5 10-24 UNC 29.5 1.16" 35.5 1.40" 83.5 3.29" 10 0.39" 35 1.38" AF190, AF205 AF190, AF205-30-00 + CAL19 2-pole auxiliay contact block AF190, AF205-30-11 105 4.13" 125 1524.92" 5.98" 5 0.20" 20 0.79" 152 5.98" ø 10.5 0.41" 27 1.06" 10 0.39" 30.5 1.20" 5 0.20" 45 1.77" AF190, AF205-30-11 + LW185 terminal enlargement 1SFC101119C0201 299 11.77" 299 11.77" 35 1.38" AF190, AF205-30-11 + LX185 terminal extension 5/156 | ABB 30.5 1.20" 10 0.37" ø 8.5 0.33" 27 1.06" 17.5 0.69" AF190, AF205 3-pole contactors With built-in PLC interface (coil code 33, 34) Main dimensions mm, inches SECTION B-B 169.5 6.67" B 35.5 1.40" 5 0.20" 196 7.72" 83.5 3.29" ø 8.5 0.33" 29.5 1.16" 105 4.13" 10 0.39" 5 35 1.38" AF190, AF205-30-00 + CAL19 2-pole auxiliay contact block AF190, AF205-30-11 4X M5 10-24 UNC 165 6.50" 35 1.38" 1SFC101119C0201 AF190, AF205 ABB | 5/157 AF190, AF205 3-pole contactors Main dimensions mm, inches 152 5.98" 196 7.727" 210 8.27" 5 AF190, AF205-30-11 + VM19 mechanical interlocking unit 70 2.76" 35 1.38" 6X M5 10-24 UNC 165 6.50" 35 1.38" 1SFC101119C0201 AF190, AF205 + VM19 mechanical interlocking unit 5/158 | ABB AF190, AF205 3-pole contactors Main dimensions mm, inches 152 5.98" 105 4.13" 35.5 1.40" 5 0.20" 8x M5 10-24 UNC 165 6.50" 35 1.39" 11 0.43" 21 0.83" 82 3.23" 25.5 1.0" 312.5 12.3" 5 37 1.46" 20 0.79" 42.5 1.67" AF190, AF205-30-11 + TA200DU thermal overload relay 62 2.44" 4 0.16" 50 1.97" 126 4.96" AF190, AF205 + TA200DU thermal overload relay 1SFC101119C0201 ø 11 0.43" ABB | 5/159 AF190, AF205 3-pole contactors Main dimensions mm, inches 152 5.98" 105 4.13" 8x M5 10-24 UNC 5 0.20" 165 6.50" 35.5 1.40" 20.5 35 1.38" 10 0.39" 112 4.42" 0.81" 342 13.46" 5 17.5 0.69" 35 1.38" 35 1.38" 8.5 0.33" 5 0.20" 123 4.84" AF190, AF205 + EF205 electronic overload relay 1SFC101119C0201 AF190, AF205-30-11 + EF205 electronic overload relay 35 1.39" 5/160 | ABB AF265, AF305, AF370 3-pole contactors Main dimensions mm, inches A 140 5.51" 180 7.09" 19.5 0.77" 35.5 1.40" 94.7 3.73" ø 10.5 0.41" 5 0.20" 33.4 1.31" 10 0.39" 225 8.86" 5 43.75 1.72" AF265, AF305, AF370-30-00 + CAL19 2-pole contact block AF265, AF305, AF370-30-11 4X M5 10-24 UNC 1SFC101120C0201 187 7.36" 43.75 1.72" AF265, AF305, AF370 ABB | 5/161 AF265, AF305, AF370 3-pole contactors With built-in PLC interface (coil code 33, 34) Main dimensions mm, inches A 140 5.51" 19.5 0.77" 195.5 7.70" 94.7 3.73" ø 10.5 0.41" 5 0.20" 225 8.86" 5 35.5 1.40" 33.4 1.31" 10 0.39" 43.75 1.72" AF265, AF305, AF370-30-00 + CAL19 2-pole contact block AF265, AF305, AF370-30-11 4X M5 10-24 UNC AF265, AF305, AF370 5/162 | ABB 1SFC101120C0201 187 7.36" 43.75 1.72" AF265, AF305, AF370 3-pole contactors mm, inches 165 6.50" 180 7.09" 5 0.79" 0.20" 30.5 1.20"ø 10.5200.41" 20 0.79" 180 7.09" ø 10.5 0.41" 12.5 0.49" 32.0 1.28" 12.5 0.49" 32.0 1.28" ø 10.5 0.41" 31.2 1.23" 25 0.98" 30.5 1.20" 30.5 1.20" 5 0.20" 180 7.09" 5 0.20" 12.5 0.49" Main dimensions AF265, AF305, AF370-30-11 + LX300 terminal extension 43.75 1.72" 43.75 1.72" AF265, AF305, AF370-30-11 + LW300 terminal enlargement 1SFC101120C0201 62 2.44" 354.5 20.02" 354.5 20.02" 354.5 13.96" 5 ABB | 5/163 AF265, AF305, AF370 3-pole contactors Main dimensions mm, inches 180 7.09" AF265, AF305, AF370-30-11 + VM19 mechanical interlocking unit 43.75 1.72" 96.25 3.79" 43.75 1.72" 8X M5 10-24 UNC 187 7.36" AF265, AF305, AF370 + VM19 mechanical interlocking unit 1SFC101120C0201 5 225 8.86" 280 11.02" 5/164 | ABB AF265, AF305, AF370 3-pole contactors Main dimensions mm, inches 180 7.09" 35.5 1.40" 8x M5 10-24 UNC 5 0.20" 5 ø 11 0.43" 44 1.73" 20 1.79" 43.8 1.72" 14 0.55" 112 4.41" 29 1.14" 385 15.16" 187 7.36" 140 5.51" 35 1.38" 43.75 1.72" 35 1.20" 5 0.20" 123 4.84" AF265, AF305, AF370 + EF370 electronic overload relay 1SFC101120C0201 AF265, AF305, AF370-30-11 + EF370 electronic overload relay ABB | 5/165 AF400 and AF460 3-pole contactors Main dimensions ø6.5 0.26" ø10.5 0.41" 216 8.5" 48.5 1.91" 6 0.24" 63 2.48" 248 9.76" 268 10.55" M5 10-24 UNC 63 2.48" AF400, AF460-30-11 AF400, AF460 216 8.5" 181 7.13" ø10 0.39" 44 1.73" 5 0.2" 63 2.48" AF400, AF460-30-11 + LX460 terminal extension 5/166 | ABB 78 3.07" AF400, AF460-30-11 + LW460 terminal enlargement 1SFC101121C0201 472 18.58" 139 5.47" 25 0.98" 12 0.47" 33 1.3" ø 10.5 0.41" 11.5 0.45" 33 1.3" 186 7.32" 25 0.98" 472 18.58" 5 22.5 0.89" 278 10.94" 25 0.98" 11.5 0.45" mm, inches 186 7.32" AF400 and AF460 3-pole contactors Main dimensions mm, inches 216 8.5" 402 15.83" ø10.5 0.41" 48.5 1.91" 30 1.18" 6 0.24" 278 10.94" 268 10.55" 25 0.98" 5 63 2.48" AF400, AF460-30-11 + VM750H mechanical interlock unit 63 2.48" 248 9.76" 216 8.5" M5 10-24 UNC 1SFC101121C0201 AF400, AF460 + VM750H mechanical interlock unit ABB | 5/167 AF400 and AF460 3-pole contactors Main dimensions mm, inches 216 8.5" 186 7.32" 63 2.48" 63 2.48" ø10.5 0.41" 48.5 1.91" 6 0.24" 248 9.76" 25 0.98" 449.5 17.7" 454.5 17.89" 5 M5 10-24 UNC 11.5 0.45" 55 2.17" 6.5 0.26" 83 3.27" 63 2.48" 6.5 0.26" ø10.5 0.41" 63 2.48" 25 0.98" 63 2.48" M5 10-24 UNC 46 1.81" 76 2.99" 5 0.2" 148 5.83" 192 7.56" AF400, AF460 + E500DU electronic O/L relay 1SFC101121C0201 AF400, AF460-30-11 + E500DU electronic O/L relay 5/168 | ABB AF580 and AF750 3-pole contactors mm, inches 210 8.27" 22.5 0.89" ø6.5 0.26" ø12.5 0.49" 242 9.53" 48.5 1.91" 6 0.24" 283 11.14" 273 10.75" 40 1.57" 11.5 0.45" Main dimensions 5 72 2.83" AF580 and AF750-30-11 249 9.8" 72 2.83" M6 1/4-20 UNC 1SFC101122C0201 AF580 and AF750 ABB | 5/169 AF580 and AF750 3-pole contactors Main dimensions mm, inches 210 8.27" 242 9.53" 43 1.69" 6 0.24" 483 19.02" 141.5 5.57" 5 9.6 0.38" 105 4.13" 35.5 1.4" ø13 0.51" 11.5 0.45" 22.5 0.89" 40 1.57" 72 2.83" 1SFC101122C0201 AF580 and AF750-30-11 + LX750 terminal extension 5/170 | ABB AF580 and AF750 3-pole contactors mm, inches 245 9.65" 40 1.57" 242 9.53" 43 1.69" 6 0.24" 9.6 0.38" 35 1.38" ø13 0.51" 11 0.43" Main dimensions 483 19.02" 141.5 5.57" 5 92 3.62" 1SFC101122C0201 AF580 and AF750-30-11 + LW750 terminal enlargement ABB | 5/171 AF580 and AF750 3-pole contactors Main dimensions mm, inches 210 8.27" 72 2.83" ø12.5 0.49" 242 9.53" 48.5 1.91" 6 0.24" 72 2.83" 249 9.8" 40 1.57" 11.5 0.45" 72 2.83" 471.5 18.56" M6 1/4-20 UNC 5 0.2" 11.5 0.45" 80 3.15" 5 0.2" 79 3.11" 466.6 18.37" 5 ø12.5 0.49" 83 3.27" 83 3.27" 40 1.57" M6 1/4-20 UNC 60.5 2.38" 82 3.23" 5 0.2" 190 7.48" 245 9.65" AF580 and AF750 + E800DU electronic O/L relay 1SFC101122C0201 AF580 and AF750-30-11 + E800DU electronic O/L relay 5/172 | ABB AF580 and AF750 3-pole contactors Main dimensions mm, inches 450 25 242 30 48.5 6 283 273 ø12.5 E2042D E2041D 5 72 AF580 and AF750-30-11 + VM 750H mechanical interlock unit 72 249 240 (M6) E2043D (M6) 1SFC101122C0201 AF580 and AF750 + VM 750H mechanical interlock unit ABB | 5/173 AF1250 3-pole contactors Main dimensions mm, inches 50 1.97" 27 72 2.83" ø 7 0.28" 242 9.53" 72 2.83" 210 8.27" 46.5 18.3" 8 0.31" 1SFC101125F0001 72 2.83" ø13 0.51" 1SFC101124F0001 249 9.8" 263 10.35" 313 12.32" AF1250-30-11 72 2.83" AF1250 5/174 | ABB 1SFC101136C0201 M6 1/4-20 UNC 1SFC101130F0001 249 9.8" 5 344 13.54" 1.06" AF1250 3-pole contactors Main dimensions mm, inches 72 2.83" ø13 0.51" 53.8 2.12" 242 9.53" 15 0.59" 50 1.97" 479 18.86" 443 17.44" AF1250-30-11 + LW1250 terminal enlargement 37 1.46" 10 0.39" 1SFC101136C0201 240 9.45" 1SFC101131F0001 95 3.74" 95 3.74" 1SFC101132F0001 34 1.34" 249 9.8" 263 10.35" 5 ABB | 5/175 AF1350, AF1650, AF2050 and AF2650 3-pole contactors Main dimensions 40 1.57" 13 0.51" AF1350, AF1650 136 5.35" 30 1.18" 13 0.51" 10 0.39" AF1350, AF1650 40 1.57" 17 0.67" 10 0.39" ø 13 0.51" 17 0.67" 13 30 1.18" 0.51" 10 0.39" AF2050 136 5.35"136 5.35" 40 1.57" 17 0.67" 136 5.35" 47 30 1.18" 10 0.39" AF2050 244 9.61" 10 0.39" 136 5.35" 10 0.39" 1.85" 136 5.35" 80 ø9 0.35"136 5.35" 3.15" 101 3.98" 438 17.24" 438 17.24" 40 312 12.28" 312 12.28" 392 15.43" 80 3.15" 101 3.98" ø9 0.35" M8 5/16-18 UMC AF1350, AF1650, AF2050 AF1350, AF1650, AF2050-30-11 40 ø 13 0.51" 1.57" 40 1.57" 17 0.67" 17 0.67" 40 1.57" 40 1.57" AF2650 244 9.61" 53 25 0.98" 80 3.15" 101 3.98" 136 5.35" 80 ø9 0.35"136 5.35" 3.15" 101 3.98" 438 17.24" 438 17.24" 136 5.35" 25 0.98" 2.09" 312 12.28" 312 12.28" 422 16.61" 2.09" 244 9.61" 53 312 12.28" 136 5.35" ø9 0.35" 40 136 5.35"136 5.35" 1.57" 136 5.35" 40 AF2650 1.57" ø 13 0.51" 422 16.61" AF2650 M8 5/16-18 UMC AF2650-30-11 1SFC101123C0201 - Rev. B 5 392 15.43" 1.85" 244 9.61" 47 312 12.28" 17 0.67" 13 0.51" 30 1.18" 40 27 ø 13 1.06" 0.51" 1.06" 1.57" 27 1.57" 40 1.57" mm, inches 5/176 | ABB AF1350, AF1650, AF2050 and AF2650 3-pole contactors Main dimensions mm, inches 244 9.61" 438 17.24" M8 5/16-18 UNC 10 0.39" 136 5.35" 93 3.66" 674 26.54" 312 12.28" 47 1.85" 170 6.69" 5 M6 1/4-20 UNC 20 0.79" 80 3.15" 136 5.35" 90 3.54" 395 15.55" 10 0.39" 136 5.35" 252 9.92" 425 16.73" 10 0.39" 30 1.18" 13 0.51" AF1350 and AF1650-30-11 + E1250DU electronic O/L relay 17 0.67" 27 1.06" 40 1.57" 441 17.36" 66.5 2.62" 879 34.61" AF1350, AF1650, AF2050, AF2650-30-11 + VM 1650H mechanical interlock unit 136 5.35" 305 12.01" 72.5 2.85" AF1350, AF1650, AF2050 136 5.35" 25 0.98" 263.5 10.37" AF2650 136 5.35" 1SFC101123C0201 - Rev. B 312 12.28" 136 5.35" 10 0.39" 263.5 10.37" M8 5/16-18 UMC AF1350, AF1650, AF2050, AF2650 + VM 1650H mechanical interlock unit ABB | 5/177 Summary_5-3 5 5/178 | ABB AF and EK 4-pole contactors Overview 5/180 Ordering details 25 to 125 A AC-1 AF09 … AF38 AC / DC operated 5/182 AF09Z … AF38Z AC / DC operated - low consumption 5/183 AF40 … AF80 AC / DC operated 5/184 Main accessories 5/186 160 to 525 A AC-1 AF116 … AF140 AC / DC operated AF190 … AF370 AC / DC operated 5/188 5/189 Main accessories 5/190 AF116 … AF140 AC / DC operated - with 1 N.O. + 1 N.C. 5/192 AF190 … AF370 AC / DC operated - with 1 N.O. + 1 N.C. 5/193 Main accessories 5/194 AF116 … AF140 AC / DC operated - with 2 N.O. + 2 N.C. 5/196 AF190 … AF370 AC / DC operated - with 2 N.O. + 2 N.C. Main accessories 5 5/197 5/198 800 to 1000 A AC-1 EK550, EK1000 AC operated - with 1 N.O. + 1 N.C. EK550, EK1000 DC operated - with 2 N.O. + 1 N.C. 5/201 EK550, EK1000 AC operated - with 2 N.O. + 2 N.C. 5/202 5/200 5/204 Technical data 5/206 Terminal marking and positionning 5/216 Main dimensions 5/220 Voltage code table 5/392 Summary_5-3 Main accessories ABB | 5/179 4-pole contactors IEC UL/CSA 5 A A 25 30 45 55 70 100 125 25 30 45 55 — — — AC / DC Control supply Type AF09 AF16 AF26 AF38 AF40 AF52 AF80 AC Control supply Type AF09 AF16 AF26 AF38 AF40 AF52 AF80 DC Control supply Type AF09 AF16 AF26 AF38 AF40 AF52 AF80 θ ≤ 40 °C A 25 30 45 55 70 100 125 θ ≤ 60 °C (1) A 25 30 40 45 60 80 105 θ ≤ 70 °C A 22 26 32 37 50 70 90 With conductor cross sectional area mm 2 4 6 10 16 35 35 50 Rated operational voltage Ue max. V 690 690 690 690 690 690 690 A 25 30 45 55 — — — IEC UL/CSA AC-1 Rated operational current θ ≤ 40 °C, 690 V General use rating 600 V AC-1 Rated operational current 600 V General use rating (1) θ ≤ 55 °C for EK550, EK1000 contactors Main accessories Front mounting CA4-10 (1 x N.O.), CA4-01 (1 x N.C.) Side mounting CAL4-11 (1 x N.O. + 1 x N.C.) Timers Electronic TEF4-ON TEF4-OFF Interlocking units Mechanical VM4 Mechanical / Electrical VEM4 Varistor + RC (AC / DC) Built-in surge protection Auxiliary contact blocks Surge suppressors 5/180 | ABB VM96-4 160 200 275 350 400 500 525 800 1000 — — — — — — — 540 — AF116 AF140 AF190 AF205 AF265 AF305 AF370 — — AF116 AF140 AF190 AF205 AF265 AF305 AF370 EK550 EK1000 AF116 AF140 AF190 AF205 AF265 AF305 AF370 EK550 EK1000 160 200 250 275 350 375 400 800 1000 145 175 225 250 300 325 350 650 800 130 160 185 200 240 260 290 575 720 70 95 150 240 240 300 2 x 185 2 x 240 2 x 300 690 690 1000 1000 1000 1000 1000 1000 1000 — — — — — — — 540 — CAL19-11 (1 x N.O. + 1 x N.C.) CAL16-11 (1 x N.O. + 1 x N.C.) VM19 (for same size contactors) VH800 5 1SBC101569S0201 - Rev. C RC-EH800 ABB | 5/181 AF09 ... AF38 4-pole contactors 25 to 55 A AC-1 AC / DC operated Description 1SBC101095F0014 AF09 ... AF38 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 690 V AC and 440 V DC. These contactors are of the block type design with 4 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltage ranges covering 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening. –– built-in surge suppression –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. AF09-40-00 Ordering details IEC Rated operational current θ ≤ 40 °C AC-1 A 1SBC101097F0014 5 AF26-40-00 UL/CSA General use rating 600 V AC Rated control circuit voltage Uc min. … Uc max. A V 50/60 Hz V DC 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 (1) 48...130 100...250 250...500 (1) 48...130 100...250 250...500 (1) 48...130 100...250 250...500 (1) 48...130 100...250 250...500 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF09-40-00-41 AF09-40-00-12 AF09-40-00-13 AF09-40-00-14 AF16-40-00-41 AF16-40-00-12 AF16-40-00-13 AF16-40-00-14 AF26-40-00-41 AF26-40-00-12 AF26-40-00-13 AF26-40-00-14 AF38-40-00-41 AF38-40-00-12 AF38-40-00-13 AF38-40-00-14 1SBL137201R4100 1SBL137201R1200 1SBL137201R1300 1SBL137201R1400 1SBL177201R4100 1SBL177201R1200 1SBL177201R1300 1SBL177201R1400 1SBL237201R4100 1SBL237201R1200 1SBL237201R1300 1SBL237201R1400 1SBL297201R4100 1SBL297201R1200 1SBL297201R1300 1SBL297201R1400 0.270 0.270 0.270 0.310 0.270 0.270 0.270 0.310 0.360 0.360 0.360 0.400 0.360 0.360 0.360 0.400 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 (1) 48...130 100...250 250...500 (1) 48...130 100...250 250...500 (1) 48...130 100...250 250...500 (1) 48...130 100...250 250...500 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF09-22-00-41 AF09-22-00-12 AF09-22-00-13 AF09-22-00-14 AF16-22-00-41 AF16-22-00-12 AF16-22-00-13 AF16-22-00-14 AF26-22-00-41 AF26-22-00-12 AF26-22-00-13 AF26-22-00-14 AF38-22-00-41 AF38-22-00-12 AF38-22-00-13 AF38-22-00-14 1SBL137501R4100 1SBL137501R1200 1SBL137501R1300 1SBL137501R1400 1SBL177501R4100 1SBL177501R1200 1SBL177501R1300 1SBL177501R1400 1SBL237501R4100 1SBL237501R1200 1SBL237501R1300 1SBL237501R1400 1SBL297501R4100 1SBL297501R1200 1SBL297501R1300 1SBL297501R1400 0.270 0.270 0.270 0.310 0.270 0.270 0.270 0.310 0.360 0.360 0.360 0.400 0.360 0.360 0.360 0.400 4 N.O. main poles 25 25 30 30 45 45 55 55 2 N.O. + 2 N.C. main poles 25 25 30 30 45 45 55 55 Auxiliary Type contacts fitted Order code Weight Pkg (1 pce) kg (1) For 24...60 V 50/60 Hz - 20...60 V DC, use AF..-..-..-11 (see voltage code table). AF..-..-..-11 not suitable for direct control by PLC-output. mm, inches 10 0.39" 5 0.20" AF09, AF16 5/182 | ABB 5.5 0.22" AF26, AF38 2x M4 8-32 UNC 5 0.20" 1SBC101375S0201 - Rev. A 10 0.39" 35 1.38" ø 4.2 0.17" 70 2.76" 6 0.24" 80 3.15" 60 2.36" 35 mm EN/IEC 60715 6 0.24" 80 3.15" 5.5 0.22" 101 3.98" 95 3.74" 2x 5.5 0.22" M4 8-32 UNC 5 0.20" 35 1.38" 45 1.77" ø 4.2 0.17" 71 2.80" 5.5 0.22" 60 2.36" 77 3.03" 45 1.77" 70 2.76" 35 mm EN/IEC 60715 5 0.20" Main dimensions AF09Z ... AF38Z 4-pole contactors 25 to 55 A AC-1 AC / DC operated - low consumption Description 1SBC101095F0014 AF09Z ... AF38Z 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 690 V AC and 440 V DC. These contactors are of the block type design with 4 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltage ranges covering 24...250 V 50/60 Hz and 12...250 V DC -- can manage large control voltage variations -- allow direct control by PLC-output ≥ 24 V DC 500 mA -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. AF09Z-40-00 IEC Rated operational current θ ≤ 40 °C AC-1 A UL/CSA General use rating 600 V AC Rated control circuit voltage Uc min. … Uc max. A V 50/60 Hz V DC 4 N.O. main poles 25 25 AF26Z-40-00 30 30 45 45 55 55 2 N.O. + 2 N.C. main poles 25 25 30 30 45 45 55 55 Auxiliary Type contacts fitted Order code 5 Weight Pkg (1 pce) kg 24...60 48...130 100...250 24...60 48...130 100...250 24...60 48...130 100...250 24...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF09Z-40-00-20 AF09Z-40-00-21 AF09Z-40-00-22 AF09Z-40-00-23 AF16Z-40-00-20 AF16Z-40-00-21 AF16Z-40-00-22 AF16Z-40-00-23 AF26Z-40-00-20 AF26Z-40-00-21 AF26Z-40-00-22 AF26Z-40-00-23 AF38Z-40-00-20 AF38Z-40-00-21 AF38Z-40-00-22 AF38Z-40-00-23 1SBL136201R2000 1SBL136201R2100 1SBL136201R2200 1SBL136201R2300 1SBL176201R2000 1SBL176201R2100 1SBL176201R2200 1SBL176201R2300 1SBL236201R2000 1SBL236201R2100 1SBL236201R2200 1SBL236201R2300 1SBL296201R2000 1SBL296201R2100 1SBL296201R2200 1SBL296201R2300 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 24...60 48...130 100...250 24...60 48...130 100...250 24...60 48...130 100...250 24...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF09Z-22-00-20 AF09Z-22-00-21 AF09Z-22-00-22 AF09Z-22-00-23 AF16Z-22-00-20 AF16Z-22-00-21 AF16Z-22-00-22 AF16Z-22-00-23 AF26Z-22-00-20 AF26Z-22-00-21 AF26Z-22-00-22 AF26Z-22-00-23 AF38Z-22-00-20 AF38Z-22-00-21 AF38Z-22-00-22 AF38Z-22-00-23 1SBL136501R2000 1SBL136501R2100 1SBL136501R2200 1SBL136501R2300 1SBL176501R2000 1SBL176501R2100 1SBL176501R2200 1SBL176501R2300 1SBL236501R2000 1SBL236501R2100 1SBL236501R2200 1SBL236501R2300 1SBL296501R2000 1SBL296501R2100 1SBL296501R2200 1SBL296501R2300 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.400 0.400 0.400 0.400 0.400 0.400 0.400 0.400 Note: Only AF..Z contactors with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole. mm, inches 10 0.39" 5 0.20" AF09Z, AF16Z 5.5 0.22" 2x M4 8-32 UNC 5 0.20" AF26Z, AF38Z ABB | 5/183 1SBC101376S0201 - Rev. A 10 0.39" 35 1.38" ø 4.2 0.17" 70 2.76" 6 0.24" 80 3.15" 35 mm EN/IEC 60715 6 0.24" 80 3.15" 5.5 0.22" 101 3.98" 95 3.74" 2x 5.5 0.22" M4 8-32 UNC 5 0.20" 35 1.38" 45 1.77" ø 4.2 0.17" 71 2.80" 5.5 0.22" 60 2.36" 77 3.03" 45 1.77" 70 2.76" 35 mm EN/IEC 60715 5 0.20" Main dimensions 60 2.36" 1SBC101097F0014 Ordering details AF40 ... AF80 4-pole contactors 70 to 125 A AC-1 AC / DC operated Description 1SBC101045V0014 AF40 ... AF80 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 690 V AC and 440 V DC. These contactors are of the block type design with 4 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltages ranges covering 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening. –– built-in surge suppression –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. AF40-40-00 Ordering details UL/CSA General use rating 600 V AC Rated control circuit voltage Uc min. … Uc max. A V 50/60 Hz V DC 24...60 24...60 48...130 100...250 250...500 24...60 24...60 48...130 100...250 250...500 24...60 24...60 48...130 100...250 250...500 20...60 (1) 48...130 100...250 250...500 20...60 (1) 48...130 100...250 250...500 20...60 (1) 48...130 100...250 250...500 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF40-40-00-41 AF40-40-00-11 AF40-40-00-12 AF40-40-00-13 AF40-40-00-14 AF52-40-00-41 AF52-40-00-11 AF52-40-00-12 AF52-40-00-13 AF52-40-00-14 AF80-40-00-41 AF80-40-00-11 AF80-40-00-12 AF80-40-00-13 AF80-40-00-14 1SBL347201R4100 1SBL347201R1100 1SBL347201R1200 1SBL347201R1300 1SBL347201R1400 1SBL367201R4100 1SBL367201R1100 1SBL367201R1200 1SBL367201R1300 1SBL367201R1400 1SBL397201R4100 1SBL397201R1100 1SBL397201R1200 1SBL397201R1300 1SBL397201R1400 1.210 1.210 1.210 1.160 1.160 1.210 1.210 1.210 1.160 1.160 1.490 1.490 1.490 1.440 1.440 24...60 24...60 48...130 100...250 250...500 24...60 24...60 48...130 100...250 250...500 20...60 (1) 48...130 100...250 250...500 20...60 (1) 48...130 100...250 250...500 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF40-22-00-41 AF40-22-00-11 AF40-22-00-12 AF40-22-00-13 AF40-22-00-14 AF80-22-00-41 AF80-22-00-11 AF80-22-00-12 AF80-22-00-13 AF80-22-00-14 1SBL347501R4100 1SBL347501R1100 1SBL347501R1200 1SBL347501R1300 1SBL347501R1400 1SBL397501R4100 1SBL397501R1100 1SBL397501R1200 1SBL397501R1300 1SBL397501R1400 1.210 1.210 1.210 1.160 1.160 1.490 1.490 1.490 1.440 1.440 125 - n io 2 N.O. + 2 N.C. Main Poles 70 - at - ar 125 ep - kg pr 100 Weight Pkg (1 pce) er AF80-40-00 Order code nd 4 N.O. Main Poles 70 - Auxiliary Type contacts (1) fitted U 1SBC101048V0014 5 IEC Rated operational current θ ≤ 40 °C AC-1 A (1) AF..-..-..-11 not suitable for direct control by PLC-output. mm, inches 113.5 4.47" 70 2.76" 6 0.24" 5.5 0.22" 5/184 | ABB 5.5 0.22" 10 0.39" AF80 1SBC101987S0201 119.5 4.70" 35 x 15 mm EN/IEC 60715 119.5 4.70" 6 0.24" 7 0.28" 10 0.39" AF40, AF52 116 4.57" 90 3.54" 7 0.28" 35 x 15 mm EN/IEC 60715 Main dimensions N3 5 ABB | 5/185 AF09 ... AF80 4-pole contactors Main accessories Contactor and main accessories (other accessories available) VEM4 mechanical and electrical interlock set including: – VM4 mechanical interlock unit with 2 fixing clips – VE4 electrical interlock block with A2-A2 connection AF contactor (without top mounted coil terminal block) AF contactor Fixing clips CAT4-11 2-pole auxiliary contact and A1/A2 coil terminal block AF contactor BX4-CA Protective cover 5 TEF4 Electronic timer A2 VM4 BX4-CA Protective cover CA4 4-pole auxiliary contact block CAL4-11 2-pole auxiliary contact block BX4 Protective cover A2 BX4-CA Protective cover CA4, CC4 1-pole auxiliary contact block CA4, CC4 1-pole auxiliary contact block CAL4-11 2-pole auxiliary contact block CA4, CC4 1-pole auxiliary contact block VE4 Main accessory fitting details Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor types Built-in Front-mounted accessories auxiliary Auxiliary contact blocks contacts Main poles Electrical and mechanical interlock set (between 2 contactors) Left side TEF4 VEM4 2-pole CAL4-11 1-pole CA4 1-pole CC4 2-pole CAT4-11 4-pole CA4 Side-mounted accessories Auxiliary contact blocks Electronic timer Right side Max. add-on N.C. auxiliary contacts: 4 N.C. max. on positions 1, 2, 3, 4 and 3 N.C. max. on positions 1 ±30°, 5 4 0 0 0 AF26 ... AF38 4 0 0 0 AF40 ... AF52 AF80 4 4 0 0 0 0 0 0 AF09 ... AF16 AF26 ... AF38 2 2 2 2 0 0 0 0 AF40 2 2 2 2 2 2 0 0 0 0 0 0 AF80 5/186 | ABB 4 max. 2 max. 3 max. Max. add-on 4 max. 2 max. 3 max. Max. add-on 4 max. 4 max. Max. add-on 4 max. 2 max. Max. add-on 4 max. 4 max. 4 max. or 1 or 1 – N.C. auxiliary or 1 or 1 – N.C. auxiliary or 1 – N.C. auxiliary or 1 or 1 N.C. auxiliary or 1 – – or 1 – – contacts: 3 N.C. or 1 – – contacts: 6 N.C. or 1 or 1 contacts: 3 N.C. or 1 – contacts: 2 N.C. or 1 or 1 or 1 max. max. max. max. or 1 or 1 – on positions or 1 or 1 – on positions or 1 or 1 on positions or 1 or 1 on positions or 1 or 1 or 1 1, 1, 1, 1, – + 1 – + 1 + 1 + 1 2, 3, 4 and 2 N.C. max. on positions 1 ±30°, 5 – + 1 – + 1 + 1 + 1 1 ±30°, 2, 3, 4, 5 – + 1 – + 1 2, 3, 4 and 2 N.C. max. on positions 1 ±30°, 5 – + 1 – + 1 1 ±30°, 2, 3, 4, 5 – + 1 – + 1 – + 1 – + 1 or 1 – + 1 or 1 + 1 + 1 – + 1 – + 1 + 1 1SBC101392S0201 - Rev. B AF09 ... AF16 AF09 ... AF80 4-pole contactors Main accessories Ordering details (1) 1SBC101112F0014 1SBC101108F0014 For contactors CA4-10 1SBC101120F0014 1SBC101114F0014 CA4-22E 1SBC101130F0014 Order code Front-mounted instantaneous auxiliary contact blocks AF09 ... AF80-40-00 1 0 – – CA4-10 AF09 ... AF80-22-00 1 0 – – CA4-10-T 0 1 – – CA4-01 0 1 – – CA4-01-T 2 2 – – CA4-22E 3 1 – – CA4-31E 4 0 – – CA4-40E AF09 ... AF16..-40-00 0 4 – – CA4-04E AF40 ... AF80-40-00 1SBN010110R1010 1SBN010110T1010 1SBN010110R1001 1SBN010110T1001 1SBN010140R1022 1SBN010140R1031 1SBN010140R1040 1SBN010140R1004 VEM4 Pkg qty Weight (1 pce) 1 10 1 10 1 1 1 1 0.014 0.014 0.014 0.014 0.055 0.055 0.055 0.055 5 Front-mounted auxiliary contact blocks with N.O. leading contact and N.C. lagging contact AF09 ... AF80-40-00 – – 1 0 CC4-10 1SBN010111R1010 1 AF09 ... AF80-22-00 – – 0 1 CC4-01 1SBN010111R1001 1 0.014 0.014 Side-mounted instantaneous auxiliary contact blocks AF09 ... AF80-40-00 1 1 – – CAL4-11 AF09 ... AF80-22-00 1 1 – – CAL4-11-T 1 10 0.040 0.040 1 0.040 1SBN030105T1000 1SBN033405T1000 10 10 0.005 0.006 1SBN030111R1000 1 0.035 1SBN010120R1011 1SBN010120T1011 Front-mounted instantaneous auxiliary contact and A1/A2 coil terminal blocks AF09 ... AF52..-40-00 1 1 – – CAT4-11E 1SBN010151R1011 AF09 ... AF40..-22-00 1SBC101129F0014 1SBC101128F0014 Type kg CAL4-11 CAT4-11E Auxiliary contacts Note: CAT4 not suitable for AF..Z contactors with DC control voltage 12...20 V DC. Mechanical interlock unit AF09 ... AF38..-40-00 AF40 ... AF80..-40-00 VM4 VM96-4 Note: VM4 includes 2 fixing clips (BB4) to maintain together both contactors. 01 NC 01NC Mechanical and electrical interlock set AF09, AF16..-40-00 0 2 AF26, AF38..-40-00 KM2 A2 VEM4 Note: – VEM4 includes a VM4 mechanical interlock unit with 2 fixing clips (BB4), a VE4 electrical interlock block. VE4 block must be used with A2-A2 connection to respect the electrical connection diagram. – VEM4 not suitable for AF..Z contactors with DC control voltage 12...20 V DC. 1SBC101392F0014 For contactors TEF4-ON VEM4 Time delay range Delay type Auxiliary Type contacts Order code Pkg qty selected by switch Electronic timers AF09 ... AF80 0.1...1 s 1...10 s 10...100 s Weight (1 pce) kg ON-delay 1 1 TEF4-ON 1SBN020112R1000 1 0.065 OFF-delay 1 1 TEF4-OFF 1SBN020114R1000 1 0.065 Note: Rated control circuit voltage Uc 24...240 V 50/60 Hz or DC. (1) For more information, refer to main catalog "Accessories" section. 1SBC101393S0201 - Rev. B KM1 A2 – – ABB | 5/187 AF116 … AF140 4-pole contactors 160 to 200 A AC-1 AC / DC operated Description 1SFC101158V0001 AF116 ... AF140 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 690 V AC. These contactors are of the block type design with 4 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF140-40-00 Ordering details 5 1SFC101193V0001 IEC Rated operational current θ ≤ 40 °C AC-1 A AF140-40-00B UL / CSA General use rating 600 V AC Rated control circuit voltage Uc min. ... Uc max. A V 50/60 Hz Auxiliary Type contacts (1) fitted Order code Weight Pkg (1 pce) V DC kg 4 N.O. main poles For connection with built-in cable clamps 160 24...60 20...60 48...130 48...130 100...250 100...250 250...500 250...500 200 24...60 20...60 48...130 48...130 100...250 100...250 250...500 250...500 With bar connections 160 - 200 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 - 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF116-40-00-11 AF116-40-00-12 AF116-40-00-13 AF116-40-00-14 AF140-40-00-11 AF140-40-00-12 AF140-40-00-13 AF140-40-00-14 1SFL427101R1100 1SFL427101R1200 1SFL427101R1300 1SFL427101R1400 1SFL447101R1100 1SFL447101R1200 1SFL447101R1300 1SFL447101R1400 2.250 2.250 2.250 2.250 2.250 2.250 2.250 2.250 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF116-40-00B-11 AF116-40-00B-12 AF116-40-00B-13 AF116-40-00B-14 AF140-40-00B-11 AF140-40-00B-12 AF140-40-00B-13 AF140-40-00B-14 1SFL427102R1100 1SFL427102R1200 1SFL427102R1300 1SFL427102R1400 1SFL447102R1100 1SFL447102R1200 1SFL447102R1300 1SFL447102R1400 2.150 2.150 2.150 2.150 2.150 2.150 2.150 2.150 (1) For other auxiliary contacts arrangements, please contact your ABB local organization. mm, inches 5/188 | ABB 120 4.72" 120 4.72" 30 1.18" 30 1.18" AF116, AF140-40-00B 55.5 2.18" 19.5 0.77" 128 5.04" 128 5.04" 55.5 2.18" 150 5.91" 19.5 4.96" 55.5 0.22" SECTION A-A SECTION A-A A 1SFC101197C0201 AF116, AF140-40-00 19.5 4.96" 55.5 0.22" 150 5.91" 150 5.91" 30 1.18" 30 1.18" A 128 5.04"128 5.04" 120 4.72"120 4.72" 19.5 0.77" SECTION SECTION A-A A-A A 150 5.91" Main dimensions A AF190 … AF370 4-pole contactors 275 to 525 A AC-1 AC / DC operated Description 1SFC101160V0001 AF190 ... AF370 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 1000 V AC. These contactors are of the block type design with 4 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF205-40-00 Ordering details UL / CSA General use rating 600 V AC Rated control circuit voltage Uc min. ... Uc max. A V 50/60 Hz V DC 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 4 N.O. main poles 275 - 350 - 400 - 500 - 525 - AF370-40-00 Auxiliary Type contacts (1) fitted Order code 5 Weight Pkg (1 pce) kg 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 AF190-40-00-11 AF190-40-00-12 AF190-40-00-13 AF190-40-00-14 AF205-40-00-11 AF205-40-00-12 AF205-40-00-13 AF205-40-00-14 AF265-40-00-11 AF265-40-00-12 AF265-40-00-13 AF265-40-00-14 AF305-40-00-11 AF305-40-00-12 AF305-40-00-13 AF305-40-00-14 AF370-40-00-11 AF370-40-00-12 AF370-40-00-13 AF370-40-00-14 1SFL487102R1100 1SFL487102R1200 1SFL487102R1300 1SFL487102R1400 1SFL527102R1100 1SFL527102R1200 1SFL527102R1300 1SFL527102R1400 1SFL547102R1100 1SFL547102R1200 1SFL547102R1300 1SFL547102R1400 1SFL587102R1100 1SFL587102R1200 1SFL587102R1300 1SFL587102R1400 1SFL607102R1100 1SFL607102R1200 1SFL607102R1300 1SFL607102R1400 3.900 3.900 3.900 3.900 3.900 3.900 3.900 3.900 6.360 6.360 6.360 6.360 6.360 6.360 6.360 6.360 6.360 6.360 6.360 6.360 (1) For other auxiliary contacts arrangements, please contact your ABB local organization. Main dimensions mm, inches A 183.75 7.23" 19.5 0.77" SECTION A-A 180 7.09" 35.5 1.40" ø 10.5 0.41" 5 0.20" 152.5 6.00" A 5 0.20" 35 1.38" AF190, AF205 1SFC101198C0201 196 7.72" 225 8.86" 33.4 1.31" 35.5 1.40" 94.7 3.73" ø 8.5 0.33" 83.5 3.29" 140 5.51" 29.5 1.16" 1SFC101197V0001 IEC Rated operational current θ ≤ 40 °C AC-1 A 43.75 1.72" AF265, AF305, AF370 ABB | 5/189 AF116 ... AF370 4-pole contactors Main accessories Main accessories (other accessories available) CAL19-11 2-pole auxiliary contact block CAL19-11B 2-pole auxiliary contact block VM Mechanical interlock 5 AF contactor with bar connections CAL19-11 2-pole auxiliary contact block LT Terminal shroud AF contactor with built-in cable clamps CAL19-11B 2-pole auxiliary contact block Main accessory fitting details Contactor types Main poles Available auxiliary contacts Side-mounted accessories Auxiliary contact blocks CAL19-11 AF116 ... AF370 4 0 0 0 2 x CAL19-11 + 2 x CAL19-11B AF116 ... AF370 4 0 0 0 2 x CAL19-11 (1) + 2 x CAL19-11B (1) (between two contactors) – + VM... (2) (2) Interlock type, according to the contactor ratings (see "Accessories"). 1SFC101203C0201 (1) Total number of auxiliary contact blocks for the two contactors. Mechanical interlock units CAL19-11B 5/190 | ABB AF116 ... AF370 4-pole contactors Main accessories Ordering details (1) 1SFC101071V0001 For contactors 1SFC101035V0001 CAL19-11 Auxiliary contacts Type Order code Pkg qty Weight (1 pce) kg Side-mounted instantaneous auxiliary contact blocks AF116 ... AF370 1 1 CAL19-11 1 1 CAL19-11B 1SFN010820R1011 1SFN010820R3311 2 2 0.050 0.050 Mechanical interlock unit AF116 ... AF370 AF116 ... AF146 and AF190, AF205 AF190, AF205 and AF265 ... AF370 VM19 VM140/190 VM205/265 1SFN030300R1000 1SFN034403R1000 1SFN035203R1000 1 1 1 0.054 0.088 0.090 Terminal shrouds AF116 … AF140, with compression lugs AF190 … AF205, with cable clamps AF190 … AF205, with compression lugs AF265 … AF370, with cable clamps AF265 … AF370, with compression lugs LT140-40L LT205-40C LT205-40L LT370-40C LT370-40L 1SFN124203R2000 1SFN124801R2000 1SFN124803R2000 1SFN125401R2000 1SFN125403R2000 2 2 2 2 2 0.090 0.060 0.290 0.040 0.370 For contactors Type Order code Pkg qty Weight (1 pce) 5 VM19 Terminal enlargements AF190 … AF205 AF265 … AF370 Dimensions hole Ø mm bar mm 10.5 10.5 20 x 5 25 x 5 kg LW205-40 LW370-40 1SFN074807R2000 1SFN075407R2000 1 1 0.306 0.540 1SFC101204C0201 (1) For more information, refer to "Accessories" section. ABB | 5/191 AF116 … AF140 4-pole contactors 160 to 200 A AC-1 AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts 1SFC101154V0001 Description AF140-40-11 AF116 ... AF140 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 690 V AC. These contactors are of the block type design with 4 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details 1SFC101192V0001 5 AF140-40-11B IEC Rated operational current θ ≤ 40 °C AC-1 A UL / CSA General use rating 600 V AC Rated control circuit voltage Uc min. ... Uc max. A V 50/60 Hz Auxiliary Type contacts (1) fitted Order code Weight Pkg (1 pce) V DC kg 4 N.O. main poles For connection with built-in cable clamps 160 24...60 20...60 48...130 48...130 100...250 100...250 250...500 250...500 200 24...60 20...60 48...130 48...130 100...250 100...250 250...500 250...500 With bar connections 160 - 200 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 - 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AF116-40-11-11 AF116-40-11-12 AF116-40-11-13 AF116-40-11-14 AF140-40-11-11 AF140-40-11-12 AF140-40-11-13 AF140-40-11-14 1SFL427101R1111 1SFL427101R1211 1SFL427101R1311 1SFL427101R1411 1SFL447101R1111 1SFL447101R1211 1SFL447101R1311 1SFL447101R1411 2.270 2.270 2.270 2.270 2.270 2.270 2.270 2.270 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AF116-40-11B-11 AF116-40-11B-12 AF116-40-11B-13 AF116-40-11B-14 AF140-40-11B-11 AF140-40-11B-12 AF140-40-11B-13 AF140-40-11B-14 1SFL427102R1111 1SFL427102R1211 1SFL427102R1311 1SFL427102R1411 1SFL447102R1111 1SFL447102R1211 1SFL447102R1311 1SFL447102R1411 2.170 2.170 2.170 2.170 2.170 2.170 2.170 2.170 (1) For other auxiliary contacts arrangements, please contact your ABB local organization. 5/192 | ABB 120 4.72" 120 4.72" 30 1.18" 30 1.18" AF116, AF140-40-11B 19.5 0.77" 128 5.04" 128 5.04" 55.5 2.18" 150 5.91" 55.5 0.22" SECTION SECTION A-A A-A A 1SFC101199C0201 AF116, AF140-40-11 19.5 4.96" 150 5.91" 150 5.91" 30 1.18" 30 1.18" A 10 0.39" 10 0.39" 150 5.91" 128 5.04" 128 5.04" 19.5 0.77" SECTION SECTION A-A A-A 120 4.72" 120 4.72" 55.5 0.22" 10 0.39" 10 0.39" mm, inches A 19.5 4.96" A 55.5 2.18" Main dimensions AF190 … AF370 4-pole contactors 275 to 525 A AC-1 AC / DC operated with 1 N.O. + 1 N.C. auxiliary contacts Description 1SFC101155V0001 AF190 ... AF370 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 1000 V AC. These contactors are of the block type design with 4 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF205-40-11 Ordering details UL / CSA General use rating 600 V AC Rated control circuit voltage Uc min. ... Uc max. A V 50/60 Hz V DC 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 4 N.O. main poles 275 - 350 - 400 - 500 - 525 - AF370-40-11 Auxiliary Type contacts (1) fitted Order code 5 Weight Pkg (1 pce) kg 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 AF190-40-11-11 AF190-40-11-12 AF190-40-11-13 AF190-40-11-14 AF205-40-11-11 AF205-40-11-12 AF205-40-11-13 AF205-40-11-14 AF265-40-11-11 AF265-40-11-12 AF265-40-11-13 AF265-40-11-14 AF305-40-11-11 AF305-40-11-12 AF305-40-11-13 AF305-40-11-14 AF370-40-11-11 AF370-40-11-12 AF370-40-11-13 AF370-40-11-14 1SFL487102R1111 1SFL487102R1211 1SFL487102R1311 1SFL487102R1411 1SFL527102R1111 1SFL527102R1211 1SFL527102R1311 1SFL527102R1411 1SFL547102R1111 1SFL547102R1211 1SFL547102R1311 1SFL547102R1411 1SFL587102R1111 1SFL587102R1211 1SFL587102R1311 1SFL587102R1411 1SFL607102R1111 1SFL607102R1211 1SFL607102R1311 1SFL607102R1411 3.920 3.920 3.920 3.920 3.920 3.920 3.920 3.920 6.380 6.380 6.380 6.380 6.380 6.380 6.380 6.380 6.380 6.380 6.380 6.380 (1) For other auxiliary contacts arrangements, please contact your ABB local organization. Main dimensions mm, inches A 183.75 7.23" 10 0.39" 19.5 0.77" SECTION A-A 180 7.09" 35.5 1.40" ø 10.5 0.41" 5 0.20" 152.5 6.00" A 5 0.20" 35 1.38" AF190, AF205 1SFC101200C0201 196 7.72" 225 8.86" 33.4 1.31" 35.5 1.40" 83.5 3.29" ø 8.5 0.33" 94.7 3.73" 140 5.51" 10 0.39" 29.5 1.16" 1SFC101195V0001 IEC Rated operational current θ ≤ 40 °C AC-1 A 43.75 1.72" AF265, AF305, AF370 ABB | 5/193 AF116 ... AF370 4-pole contactors with 1 N.O. + 1 N.C. auxiliary contacts Main accessories Main accessories (other accessories available) CAL19-11B 2-pole auxiliary contact block 5 VM Mechanical interlock AF contactor with bar connections CAL19-11B 2-pole auxiliary contact block LT Terminal shroud AF contactor with built-in cable clamps Main accessory fitting details Contactor types Main poles Available auxiliary contacts Side-mounted accessories Auxiliary contact blocks CAL19-11 AF116 ... AF370 4 0 1 1 1 x CAL19-11 + 2 x CAL19-11B AF116 ... AF370 4 0 1 1 – + 2 x CAL19-11B (1) (between two contactors) – + VM... (2) (2) Interlock type, according to the contactor ratings (see "Accessories"). 1SFC101205C0201 (1) Total number of auxiliary contact blocks for the two contactors. Mechanical interlock units CAL19-11B 5/194 | ABB AF116 ... AF370 4-pole contactors with 1 N.O. + 1 N.C. auxiliary contacts Main accessories Ordering details (1) 1SFC101071V0001 For contactors 1SFC101035V0001 CAL19-11 Auxiliary contacts Type Order code Pkg qty Weight (1 pce) kg Side-mounted instantaneous auxiliary contact blocks AF116 ... AF370 1 1 CAL19-11 1 1 CAL19-11B 1SFN010820R1011 1SFN010820R3311 2 2 0.050 0.050 Mechanical interlock unit AF116 ... AF370 AF116 ... AF146 and AF190, AF205 AF190, AF205 and AF265 ... AF370 VM19 VM140/190 VM205/265 1SFN030300R1000 1SFN034403R1000 1SFN035203R1000 1 1 1 0.054 0.088 0.090 Terminal shrouds AF116 … AF140, with compression lugs AF190 … AF205, with cable clamps AF190 … AF205, with compression lugs AF265 … AF370, with cable clamps AF265 … AF370, with compression lugs LT140-40L LT205-40C LT205-40L LT370-40C LT370-40L 1SFN124203R2000 1SFN124801R2000 1SFN124803R2000 1SFN125401R2000 1SFN125403R2000 2 2 2 2 2 0.090 0.060 0.290 0.040 0.370 For contactors Type Order code Pkg qty Weight (1 pce) 5 VM19 Terminal enlargements AF190 … AF205 AF265 … AF370 Dimensions hole Ø mm bar mm 10.5 10.5 20 x 5 25 x 5 kg LW205-40 LW370-40 1SFN074807R2000 1SFN075407R2000 1 1 0.306 0.540 1SFC101206C0201 (1) For more information, refer to "Accessories" section. ABB | 5/195 AF116 … AF140 4-pole contactors 160 to 200 A AC-1 AC / DC operated with 2 N.O. + 2 N.C. auxiliary contacts 1SFC101159V0001 Description AF140-40-22 AF116 ... AF140 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 690 V AC. These contactors are of the block type design with 4 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details 1SFC101194V0001 5 AF140-40-22B IEC Rated operational current θ ≤ 40 °C AC-1 A UL / CSA General use rating 600 V AC Rated control circuit voltage Uc min. ... Uc max. A V 50/60 Hz Auxiliary Type contacts (1) fitted Order code Weight Pkg (1 pce) V DC kg 4 N.O. main poles For connection with built-in cable clamps 160 24...60 20...60 48...130 48...130 100...250 100...250 250...500 250...500 200 24...60 20...60 48...130 48...130 100...250 100...250 250...500 250...500 With bar connections 160 - 200 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 - 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 AF116-40-22-11 AF116-40-22-12 AF116-40-22-13 AF116-40-22-14 AF140-40-22-11 AF140-40-22-12 AF140-40-22-13 AF140-40-22-14 1SFL427101R1122 1SFL427101R1222 1SFL427101R1322 1SFL427101R1422 1SFL447101R1122 1SFL447101R1222 1SFL447101R1322 1SFL447101R1422 2.290 2.290 2.290 2.290 2.290 2.290 2.290 2.290 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 AF116-40-22B-11 AF116-40-22B-12 AF116-40-22B-13 AF116-40-22B-14 AF140-40-22B-11 AF140-40-22B-12 AF140-40-22B-13 AF140-40-22B-14 1SFL427102R1122 1SFL427102R1222 1SFL427102R1322 1SFL427102R1422 1SFL447102R1122 1SFL447102R1222 1SFL447102R1322 1SFL447102R1422 2.190 2.190 2.190 2.190 2.190 2.190 2.190 2.190 (1) For other auxiliary contacts arrangements, please contact your ABB local organization. 5/196 | ABB 120 4.72" 120 4.72" 30 1.18" 30 1.18" AF116, AF140-40-11B 19.5 0.77" 128 5.04" 128 5.04" 55.5 2.18" 150 5.91" 55.5 0.22" SECTION SECTION A-A A-A A 1SFC101201C0201 AF116, AF140-40-11 19.5 4.96" 150 5.91" 150 5.91" 30 1.18" 30 1.18" A 10 0.39" 10 0.39" 150 5.91" 128 5.04" 128 5.04" 19.5 0.77" SECTION SECTION A-A A-A 120 4.72" 120 4.72" 55.5 0.22" 10 0.39" 10 0.39" mm, inches A 19.5 4.96" A 55.5 2.18" Main dimensions AF190 … AF370 4-pole contactors 275 to 525 A AC-1 AC / DC operated with 2 N.O. + 2 N.C. auxiliary contacts Description 1SFC101161V0001 AF190 ... AF370 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 1000 V AC. These contactors are of the block type design with 4 main poles. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF205-40-22 Ordering details UL / CSA General use rating 600 V AC Rated control circuit voltage Uc min. ... Uc max. A V 50/60 Hz V DC 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 20...60 48...130 100...250 250...500 4 N.O. main poles 275 - 350 - 400 - 500 - 525 - AF370-40-22 Auxiliary Type contacts (1) fitted Order code 5 Weight Pkg (1 pce) kg 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 AF190-40-22-11 AF190-40-22-12 AF190-40-22-13 AF190-40-22-14 AF205-40-22-11 AF205-40-22-12 AF205-40-22-13 AF205-40-22-14 AF265-40-22-11 AF265-40-22-12 AF265-40-22-13 AF265-40-22-14 AF305-40-22-11 AF305-40-22-12 AF305-40-22-13 AF305-40-22-14 AF370-40-22-11 AF370-40-22-12 AF370-40-22-13 AF370-40-22-14 1SFL487102R1122 1SFL487102R1222 1SFL487102R1322 1SFL487102R1422 1SFL527102R1122 1SFL527102R1222 1SFL527102R1322 1SFL527102R1422 1SFL547102R1122 1SFL547102R1222 1SFL547102R1322 1SFL547102R1422 1SFL587102R1122 1SFL587102R1222 1SFL587102R1322 1SFL587102R1422 1SFL607102R1122 1SFL607102R1222 1SFL607102R1322 1SFL607102R1422 3.940 3.940 3.940 3.940 3.940 3.940 3.940 3.940 6.400 6.400 6.400 6.400 6.400 6.400 6.400 6.400 6.400 6.400 6.400 6.400 (1) For other auxiliary contacts arrangements, please contact your ABB local organization. Main dimensions mm, inches A 183.75 7.23" 10 0.39" 19.5 0.77" SECTION A-A 180 7.09" 35.5 1.40" ø 10.5 0.41" 5 0.20" 152.5 6.00" A 5 0.20" 35 1.38" AF190, AF205 1SFC101202C0201 196 7.72" 225 8.86" 33.4 1.31" 35.5 1.40" 83.5 3.29" ø 8.5 0.33" 94.7 3.73" 140 5.51" 10 0.39" 29.5 1.16" 1SFC101196V0001 IEC Rated operational current θ ≤ 40 °C AC-1 A 43.75 1.72" AF265, AF305, AF370 ABB | 5/197 AF116 ... AF370 4-pole contactors with 2 N.O. + 2 N.C. auxiliary contacts Main accessories Main accessories (other accessories available) CAL19-11B 2-pole auxiliary contact block 5 CAL19-11B 2-pole auxiliary contact block AF contactor with built-in cable clamps Main accessory fitting details Contactor types Main poles Available auxiliary contacts Side-mounted accessories Auxiliary contact blocks CAL19-11 4 0 2 2 – + 2 x CAL19-11B Mechanical interlock units (between two contactors) – 1SFC101207C0201 AF116 ... AF370 CAL19-11B 5/198 | ABB AF116 ... AF370 4-pole contactors with 2 N.O. + 2 N.C. auxiliary contacts Main accessories Ordering details (1) 1SFC101071V0001 For contactors Auxiliary contacts Type Order code Pkg qty Weight (1 pce) kg Side-mounted instantaneous auxiliary contact blocks 1 1 CAL19-11B AF116 ... AF370 1SFN010820R3311 2 0.050 Terminal shrouds AF116 … AF140, with compression lugs AF190 … AF205, with cable clamps AF190 … AF205, with compression lugs AF265 … AF370, with cable clamps AF265 … AF370, with compression lugs 1SFN124203R2000 1SFN124801R2000 1SFN124803R2000 1SFN125401R2000 1SFN125403R2000 2 2 2 2 2 0.090 0.060 0.290 0.040 0.370 CAL19-11 LT140-40L LT205-40C LT205-40L LT370-40C LT370-40L 5 For contactors Terminal enlargements AF190 … AF205 AF265 … AF370 Dimensions Type hole Ø mm bar mm 10.5 10.5 20 x 5 25 x 5 Order code Pkg qty Weight (1 pce) kg LW205-40 LW370-40 1SFN074807R2000 1SFN075407R2000 1 1 0.306 0.540 1SFC101208C0201 (1) For more information, refer to "Accessories" section. ABB | 5/199 EK550, EK1000 4-pole contactors 800 to 1000 A AC-1 AC operated - with 1 N.O. + 1 N.C. auxiliary contacts 1SFC98099-069 Description EK550 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 1000 V AC and 600 V DC, EK1000 up to 1000 V AC. These contactors are of the block type design with: –– 4 main poles –– control circuit: AC operated –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details EK1000-40-11 5 IEC Rated operational current θ ≤ 40 °C AC-1 A 800 UL/CSA General use rating 600 V AC Rated control circuit voltage Uc (1) A 540 1000 - V 50 Hz 48 110 110…115 220 220…230 380 380…400 400…415 48 110 110…115 220 220…230 380 380…400 400…415 Auxiliary Type contacts fitted V 60 Hz 110…120 115…127 220…240 230…255 380…415 400…440 110…120 115…127 220…240 230…255 380…415 400…440 - 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Order code Weight Pkg (1 pce) EK550-40-11 EK550-40-11 EK550-40-11 EK550-40-11 EK550-40-11 EK550-40-11 EK550-40-11 EK550-40-11 EK1000-40-11 EK1000-40-11 EK1000-40-11 EK1000-40-11 EK1000-40-11 EK1000-40-11 EK1000-40-11 EK1000-40-11 kg 17.200 17.200 17.200 17.200 17.200 17.200 17.200 17.200 17.500 17.500 17.500 17.500 17.500 17.500 17.500 17.500 SK827041-AD SK827041-EF SK827041-EG SK827041-EL SK827041-EM SK827041-EP SK827041-ER SK827041-AR SK827044-AD SK827044-EF SK827044-EG SK827044-EL SK827044-EM SK827044-EP SK827044-ER SK827044-AR (1) Other control voltages see voltage code table. mm, inches 11 0.43" 1) 270 10.63" 11 0.43" 1) 244 9.61" 11 0.43"1) 270 10.63" ø 11 0.43" 225.5 8.88" 2) 139.5 5.49" 244 9.61" 23 0.91" ø 11 0.43" 2) (M10) 225.5 8.88" 139.5 5.49" 7/L4 2/T1 4/T2 6/T3 8/T4 1/L1 3/L2 5/L3 7/L4 2/T1 4/T2 6/T3 8/T4 223 8.78" 5/L3 6 0.24" 299 11.77" 3/L2 5) (M10) 5) 223 8.78" 1/L1 272 10.71" 23 0.91"4) 8 0.31" 4) 12.5 0.49" EK550 1) 2) 3) 4) 5) 5/200 | ABB Dimension for extra auxiliary contact block. Screw, nut and washer by-packed. Min. distance to uninsulated wall. Damping elements are included. Earthing screw. 403) 1.57" EK1000 40 1.57" 0.79" 20 67 2.64" E1692D 11 25 0.98" E0264D6 67 2.64" E0263D6 11 40 3) 1.57" E1694D 11 0.43" 1) 1SFC101217C0201 Main dimensions EK550, EK1000 4-pole contactors 800 to 1000 A AC-1 DC operated - with 2 N.O. + 1 N.C. auxiliary contacts 1SFC98099-069 Description EK550 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 1000 V AC and 600 V DC, EK1000 up to 1000 V AC. These contactors are of the block type design with: –– 4 main poles –– control circuit: DC operated –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details IEC Rated operational current θ ≤ 40 °C AC-1 A 800 UL / CSA General use rating 600 V AC Rated control circuit voltage Uc A 540 1000 - V DC 24 36 48 60 75 110 125 220 24 36 48 60 75 110 125 220 Main dimensions Auxiliary Type contacts fitted 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Order code Weight Pkg (1 pce) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 EK550-40-21 EK550-40-21 EK550-40-21 EK550-40-21 EK550-40-21 EK550-40-21 EK550-40-21 EK550-40-21 EK1000-40-21 EK1000-40-21 EK1000-40-21 EK1000-40-21 EK1000-40-21 EK1000-40-21 EK1000-40-21 EK1000-40-21 11 0.43" 1) 5 kg 17.200 17.200 17.200 17.200 17.200 17.200 17.200 17.200 17.500 17.500 17.500 17.500 17.500 17.500 17.500 17.500 SK827041-DB SK827041-DC SK827041-DD SK827041-DT SK827041-DG SK827041-DE SK827041-DU SK827041-DF SK827044-DB SK827044-DC SK827044-DD SK827044-DT SK827044-DG SK827044-DE SK827044-DU SK827044-DF mm, inches 296 11.65" 270 10.63" ø 11 0.43" 270 10.63" 2) 139.5 5.49" 23 0.91" 244 9.61" 2) (M10) 225.5 8.88" 139.5 5.49" 5/L3 7/L4 2/T1 4/T2 6/T3 8/T4 6 0.24" 1/L1 3/L2 5/L3 7/L4 2/T1 4/T2 6/T3 8/T4 223 8.78" 3/L2 8 0.31" 5) (M10) 5) 223 8.78" 1/L1 272 10.71" 23 0.91"4) 299 11.77" ø 11 0.43" 4) 40 3) 1) 2) 3) 4) 5) 12.5 0.49" Dimension for extra auxiliary contact block. Screw, nut and washer by-packed. Min. distance to uninsulated wall. Damping elements are included. Earthing screw. 403) 1.57" 67 2.64" 40 1.57" 20 0.79" EK1000 1SFC101218C0201 EK550 25 0.98" E1693D 67 2.64" E0264D6 1.57" E1694D 11 0.43" 1) 225.5 8.88" 244 9.61" 296 11.65" E0263D8 EK1000-40-21 ABB | 5/201 EK550, EK1000 4-pole Contactors 800 to 1000 A AC-1 AC Operated - with 2 N.O. + 2 N.C. auxiliary contacts 1SFC98099-069 Description EK550 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and for controlling power circuits up to 1000 V AC and 600 V DC, EK1000 up to 1000 V AC. These contactors are of the block type design with: –– 4 main poles –– control circuit: AC operated –– add-on auxiliary contact blocks for side mounting and a wide range of accessories Ordering details EK1000-40-22 5 IEC Rated operational current θ ≤ 40 °C AC-1 A 800 UL/CSA General use rating 600 V AC Rated control circuit voltage Uc (1) A 540 1000 - V 50 Hz 48 110 110…115 220 220…230 380 380…400 400…415 48 110 110…115 220 220…230 380 380…400 400…415 Auxiliary Type contacts fitted V 60 Hz 110…120 115…127 220…240 230…255 380…415 400…440 110…120 115…127 220…240 230…255 380…415 400…440 - 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Order code Weight Pkg (1 pce) EK550-40-22 EK550-40-22 EK550-40-22 EK550-40-22 EK550-40-22 EK550-40-22 EK550-40-22 EK550-40-22 EK1000-40-22 EK1000-40-22 EK1000-40-22 EK1000-40-22 EK1000-40-22 EK1000-40-22 EK1000-40-22 EK1000-40-22 kg 17.200 17.200 17.200 17.200 17.200 17.200 17.200 17.200 17.500 17.500 17.500 17.500 17.500 17.500 17.500 17.500 SK827043-AD SK827043-EF SK827043-EG SK827043-EL SK827043-EM SK827043-EP SK827043-ER SK827043-AR SK827045-AD SK827045-EF SK827045-EG SK827045-EL SK827045-EM SK827045-EP SK827045-ER SK827045-AR (1) Other control voltages see voltage code table. Main dimensions mm, inches 11 0.43" 1) 296 11.65" 270 10.63" 244 9.61" 11 0.43"1) ø 11 0.43" 2) 225.5 8.88" 244 9.61" 139.5 5.49" 225.5 8.88" 139.5 5.49" 4/T2 6/T3 8/T4 67 2.64" EK550 25 0.98" 12.5 0.49" 1) Dimension for extra auxiliary contact block 2) Screw, nut and washer by-packed 3) Min. distance to uninsulated wall 4) Damping elements are included 5) Earthing screw 5/202 | ABB 3/L2 5/L3 7/L4 2/T1 4/T2 6/T3 8/T4 299 11.77" 2/T1 1/L1 403) 1.57" 223 8.78" 7/L4 40 67 2.64" EK1000 40 1.57" 20 0.79" E1693D 5/L3 8 0.31" 4) 6 0.24" 5) 223 8.78" 3/L2 (M10) E0263D6 11 1/L1 272 10.71" 23 0.91" 4) 23 0.91" 5) (M10) E0264D6 ø 11 0.43" 2) 3) 1.57" E1694D 270 10.63" 1SFC101219C0201 11 0.43" 1) Notes N4 5 ABB | 5/203 EK550, EK1000 4-pole contactors with 1 N.O. + 1 N.C. auxiliary contacts and 2 N.O. + 1 N.C. auxiliary contacts Main accessory fitting details Mounting positions of the auxiliary contact Auxiliary contact types and connecting diagrams 13 21 14 22 CAL16-11 A 31 43 32 44 CAL16-11 B 53 61 54 62 CAL16-11 C 71 83 72 84 CAL16-11 D 35 47 36 48 CCL16-11 E (1) (1) Contact 35-36 used for some types of EK... contactors EK 4-pole contactors Contactor types Main poles Available auxiliary contacts Add-on auxiliary contact blocks 5 Mounting and positioning Factory mounted auxiliary contacts 2-pole CAL16-11 ... Add-on CAL16-11 auxiliary contacts AC operated, 50 Hz, 60 Hz or 50/60 Hz EK550, EK1000 4 0 1 1 A + 1 x CAL16-11B + 1 x CAL16-11C + 1 x CAL16-11D + 1 x CAL16-11C CA BD CA E DC operated EK550, EK1000 4 0 2 1 A E EK 4-pole reversing contactors with VH800 mechanical and electrical interlock units "Left hand" contactors Interlocking "Right hand" contactors Add-on auxiliary contact blocks Mounting and positioning Factory mounted auxiliary contacts 2-pole CAL16-11 ... Add-on CAL16-11 auxiliary contacts AC operated, 50 Hz, 60 Hz or 50/60 Hz 1 x CAL16-11C EK550, EK1000 VH800 EK550, EK1000 VH800 EK550, EK1000 + CA BD 1 x CAL16-11D DC operated – E E 1SFC101220C0201 EK550, EK1000 5/204 | ABB EK550, EK1000 4-pole contactors with 1 N.O. + 1 N.C. auxiliary contacts and 2 N.O. + 1 N.C. auxiliary contacts 3 5 7 7 5 3 1 2 4 6 8 8 6 4 2 Ordering details (1) A1 For contactors A2 Auxiliary contacts E0747D A2 1 Order code Pkg qty Weight (1 pce) kg BSS550 ... BSS1000 Side-mounted auxiliary contact blocks EK A078 RC-EH Type 1 1 1 1 1 1 1 1 CAL16-11B CAL16-11C CAL16-11D CCL16-11E (2) SK829002-B SK829002-C SK829002-D SK829002-E 1 1 1 1 0.050 0.050 0.050 0.050 Mechanical interlock unit for two horizontal mounted contactors EK550, EK1000 VH800 SK829070-F 1 6.000 Connecting sets EK550 EK1000 SK829090-E SK829090-H 1 1 3.300 5.500 Order code Pkg qty Weight (1 pce) SK829007-C SK829007-C SK829007-D 1 1 1 kg 0.015 0.015 0.015 BSS550 BSS1000 5 Surge suppressors For contactors EK550, EK1000 EK550, EK1000 EK550, EK1000 Rated control circuit Type voltage Uc V AC DC ● 48...110 – RC-EH800/110 ● RC-EH800/110 24...125 – ● 220...600 – RC-EH800/600 (1) See "Main accessory fitting details" table. (2) Mounting of CCL16-11E blocks does not allow an additional second block to be added on top of it. All DC operated EK contactors are equipped with one CCL16-11E on the right side. 1SFC101220C0201 A1 ABB | 5/205 AF09 ... AF80 4-pole contactors Technical data Main pole - Utilization characteristics according to IEC AC / DC operated Contactor types Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C With conductor cross-sectional area AC-1 Utilization category For air temperature close to contactor θ ≤ 40 °C Ie / Rated operational current AC-1 θ ≤ 60 °C Ue max. ≤ 690 V, 50/60 Hz M 3 3-phase motors AF40 AF52 AF80 35 A 6 mm² 35 A 6 mm² 55 A 16 mm² 55 A 16 mm² 105 A 35 mm² 105 A 35 mm² 125 A 50 mm² 25 A 25 A θ ≤ 70 °C 22 A 4 mm² 30 A 30 A 26 A 6 mm² 45 40 32 10 55 45 37 16 70 60 50 35 A A A mm² 100 A 80 A 70 A 35 mm² 125 A 105 A 90 A 50 mm² 18 A 18 A 18 A 18 A 15 A 10.5 A A A A mm² A A A mm² 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 9A 9A 9A 9A 9.5 A 7A 23.2 A 22 A 21.2 A 20 A 17.6 A 10.5 A 23.2 A 22 A 21.2 A 20 A 17.6 A 10.5 A 40 40 40 40 35 25 A A A A A A 53 53 53 53 45 35 A A A A A A 80 80 80 80 65 49 A A A A A A 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 2.2 kW 4 kW 5.5 kW 4 kW 7.5 kW 4 kW 9 kW 11 kW 4 kW 9 kW 11 kW 5.5 kW 9 kW 11 kW 5.5 kW 9 kW 9 kW 10 x Ie AC-3 acc. to IEC 60947-4-1 8 x Ie AC-3 acc. to IEC 60947-4-1 5.5 kW 11 kW 11 kW 11 kW 9 kW 11 kW 18.5 kW 22 kW 22 kW 22 kW 22 kW 15 22 30 30 30 30 kW kW kW kW kW kW 22 37 45 45 45 45 kW kW kW kW kW kW 32 A 300 A 150 A 80 A 60 A 35 A 250 A 106 A 1.2 W 0.35 W 63 A 450 A 300 A 225 A 150 A 55 A 2.3 W 0.42 W 80 A 1000 A 600 A 350 A 250 A 110 A 950 A 600 A 600 A 300 A 3W 1W 110 A 1000 A 600 A 350 A 250 A 110 A 950 A 600 A 6.3 W 1.7 W Rated operational power AC-3 (1) M 3 1500 r.p.m. 50 Hz 1800 r.p.m. 60 Hz 3-phase motors Rated making capacity AC-3 Rated breaking capacity AC-3 Short-circuit protection device for contactors Without thermal overload relay - Motor protection excluded Ue ≤ 500 V AC - gG type fuse 25 A 1 s 300 A Rated short-time withstand current Icw 10 s 150 A At 40 °C ambient temperature, in free air from a cold state 30 s 80 A 1 min 60 A 15 min 35 A at 440 V 250 A Maximum breaking capacity N.O. main pole cos φ = 0.45 at 690 V 106 A at 440 V N.C. Main pole at 690 V Ie / AC-1 0.8 W Power dissipation per pole Ie / AC-3 0.1 W AC-1 600 cycles/h Max. electrical switching frequency 50 A 450 A 300 A 225 A 150 A 55 A 1.6 W 0.42 W 160 A 1200 A 780 A 450 A 300 A 140 A 1100 A 750 A 900 A 750 A 8W 3.2 W (1) For the corresponding kW/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor Rated Operational Powers and Currents" (2) For the protection of motor starters against short circuits, see "Coordination with Short-circuit Protection Devices". Main pole - Utilization characteristics according to UL / CSA Contactor types Standards Max. operational voltage UL / CSA general use rating 600 V AC With conductor cross-sectional area Max. electrical switching frequency For general use AC / DC operated AF09 AF16 UL 508, CSA C22.2 N°14 600 V AF26 AF38 AF40 AF52 AF80 UL 60947-4-1, CSA-C22.2 No. 60947-4-1 25 A AWG 10 45 A AWG 8 55 A AWG 6 AWG 6 30 A AWG 10 AWG 4 AWG 2 600 cycles/h Note: 4-pole contactors fitted with 2 N.O. + 2 N.C. main poles, see "General technical data". 1SBC101989S0201 5 With conductor cross-sectional area AC-3 Utilization category For air temperature close to contactor θ ≤ 60 °C Ie / Max. rated operational current AC-3 (1) AF09 AF16 AF26 AF38 IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 690 V 50 / 60 Hz 5/206 | ABB AF116 ... AF370 4-pole contactors Technical data Main pole - Utilization characteristics according to IEC AC / DC operated Contactor types Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C With conductor cross-sectional area AC-1 Utilization category For air temperature close to contactor Ie / Rated operational current AC-1 Ue max. ≤ 690 V, 50/60 Hz With conductor cross-sectional area AF370 EK550 EK1000 160 A 70 mm² 200 A 95 mm² 275 A 350 A 400 A 500 A 525 A 150 mm² 240 mm² 240 mm² 300 mm² 2x (3) (4) 185 mm² (4) 800 A 2x 240 mm² 1000 A 2x 300 mm² 160 A 145 A 130 A 70 mm² 200 A 175 A 160 A 95 mm² 275 250 200 250 225 185 150 A A A A A A mm² 350 300 240 275 250 200 240 (3) A A A A A A mm² 400 350 290 350 300 240 240 A A A A A A mm² 500 400 325 375 325 260 300 (4) A A A A A A mm² 525 A 425 A 350 A 400 A 350 A 290 A 2x 185 mm² (4) 800 650 575 2x 240 mm² 1000 A 800 A 720 A 2x 300 mm² 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 1000 V 116 116 116 116 - 140 140 140 140 - 190 190 190 190 - A A A A 205 205 205 205 - A A A A 265 265 265 265 - A A A A 305 305 305 305 - A A A A 370 370 370 370 - A A A A 550 550 550 550 550 550 175 A A A A A A A - 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 1000 V 30 kW 37 kW 55 kW 55 kW 55 kW 75 kW 90 kW 110 kW 55 kW 75 kW 90 kW 110 kW 75 kW 90 kW 110 kW 132 kW 10 x Ie AC-3 acc. to IEC 60947-4-1 8 x Ie AC-3 acc. to IEC 60947-4-1 kW kW kW kW 160 280 315 315 400 500 250 kW kW kW kW kW kW kW - θ ≤ 40 °C θ ≤ 60 °C θ ≤ 70 °C θ ≤ 40 °C θ ≤ 60 °C θ ≤ 70 °C Ue max. ≤ 1000 V, 50/60 Hz AF116 AF140 AF190 AF205 AF265 AF305 IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 690 V 1000 V 50 / 60 Hz A A A 5 AC-3 Utilization category For air temperature close to contactor θ ≤ 60 °C Ie / Max. rated operational current AC-3 (1) M 3 3-phase motors A A A A A A A A Rated operational power AC-3 (1) M 3 1500 r.p.m. 50 Hz 1800 r.p.m. 60 Hz 3-phase motors Rated making capacity AC-3 Rated breaking capacity AC-3 Short-circuit protection device for contactors Without thermal overload relay - Motor protection excluded Ue ≤ 500 V AC - gG type fuse 200 A 250 A 1 s 1300 A Rated short-time withstand current Icw 1460 A 10 s 928 A At 40 °C ambient temperature, 1168 A in free air from a cold state 30 s 536 A 674 A 1 min 379 A 477 A 15 min 160 A 200 A at 440 V 2000 A Maximum breaking capacity 3000 A at 690 V cos φ = 0.45 Ie / AC-1 12 W Power dissipation per pole 18 W Ie / AC-3 AC-1 300 cycles/h Max. electrical switching frequency AC-3 300 cycles/h AC-2, AC4 - 355 A 1900 A 1520 A 878 A 621 A 275 A 3300 A 15 W - 400 A 2050 A 1640 A 947 A 670 A 350 A 3500 A 25 W - 75 kW 132 kW 132 kW 160 kW - 90 kW 160 kW 160 kW 160 kW - 110 200 200 200 - 630 A 2650 A 2120 A 1224 A 865 A 400 A 3800 A 32 W - 630 A 3050 A 2440 A 1409 A 996 A 500 A 4600 A 50 W - 630 A 3700 A 2960 A 1709 A 1208 A 525 A 5000 A 72 W - 800 A 5500 A 5300 A 3700 A 3000 A 1000 A 5400 A 5400 A 60 W 25 W 1000 A 6800 A 6400 A 4400 A 3400 A 1200 A 80 W - 120 cycles/h - (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". (3) For currents above 275 A use terminal enlargements or terminal extensions. (4) For currents above 450 A use terminal enlargements or terminal extensions. Main pole - Utilization characteristics according to UL / CSA AC / DC operated AF116 AF140 UL 60947-4-1 600 V AF190 AF205 AF265 AF305 AF370 EK550 EK1000 UL 508, CSA C22.2 N°14 540 A AWG 2/0 AWG 3/0 MCM 250 MCM 250 MCM 400 MCM 500 2//MCM 300 - 1SFC101209C0201 Contactor types Standards Max. operational voltage UL / CSA general use rating 600 V AC With conductor cross-sectional area Max. electrical switching frequency For general use 300 cycles/h ABB | 5/207 AF09 ... AF80 4-pole contactors Technical data General technical data Contactor types Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Electromagnetic compatibility B2 AF38 AF40 AF52 AF80 1000 V 8 kV Devices complying with IEC 60947-1 / EN 60947-1 - Environments A and B 10 millions operating cycles 3600 cycles/h Shock direction A B1 B2 C1 C2 A B1 B2 C1 C2 C1 B1 AF26 -40...+70 °C -60...+80 °C Category B according to IEC 60947-1 Annex Q 3000 m 4 N.O. Main poles A AF16 690 V 600 V 6 kV Devices complying with IEC 60947-1 / EN 60947-1 Environment A Ambient air temperature close to contactor Operation Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency Shock withstand acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 A AF09 2 N.O. + 2 N.C. Main poles C2 Vibration withstand acc. to IEC 60068-2-6 1/2 sinusoidal shock for 11 ms: no change in contact position, closed or open position 30 g (1) 25 g closed position / 5 g open position (1) 15 g (1) 25 g (1) 25 g (1) 30 g (1) 25 g closed position / 5 g open position (1) 15 g (1) 25 g (1) 25 g (1) 5...300 Hz (1) 4 g closed position / 2 g open position (1) On request Remark for 4-pole contactors fitted with 2 N.O. + 2 N.C. main poles 1 R5 R3 7 These contactors are suitable for controlling 2 separate circuits, i.e. 2 loads with 2 separate supplies, or 1 circuit comprising 2 separate loads with a single supply (see diagrams below). When the contactor operates there is no mechanical overlapping between the N.O. poles and the N.C. poles: BREAK before MAKE. 2 R6 R4 ! 8 These contactors are not suitable for a reversing starter or for controlling a single load from 2 separate supplies. Block diagrams – Single supply and 2 separate loads – 2 separate supplies and 2 separate loads Main supply Supply Back-up supply 5/208 | ABB A1 1 R3 A2 2 R4 R5 7 A1 R6 8 A2 1 R3 2 R4 R5 7 R6 8 Load Load Load Load 1SBC101990S0201 5 AC / DC operated AF116 ... EK1000 4-pole contactors Technical data General technical data AC / DC operated Contactor types Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Electromagnetic compatibility Ambient air temperature close to contactor Operation Storage Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Maximum switching frequency AF116 AF140 AF190 AF205 AF265 AF305 AF370 1000 V 600 V 8 kV AF contactors comply with IEC 60947-1 / EN 60947-1 - Environment A -40 to +70 °C -40 to +70 °C 3000 m 5 million operating cycles 300 cycles/h 5 General technical data AC or DC operated Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL Rated impulse withstand voltage Uimp. Electromagnetic compatibility Ambient air temperature close to contactor Operation Fitted with thermal overload relay Without thermal overload relay Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency Shock withstand acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 Closed or open position C1 ABB A B1 B2 C2 E1862D A Shock direction A B1 B2 C1 C2 EK550 EK1000 1000 V 600 V 8 kV EK contactors complying with IEC 60947-1 / EN 60947-1 - Environment A -25 to +55 °C -40 to +70 °C -50 to +70 °C Category B acc. to IEC 60068-2-30 ≤ 3000 m - 5 millions operating cycles 60 cycles/h 3 millions operating cycles 1/2 sinusoidal shock for 15 ms: no change in contact position, closed or open position 10 g 10 g 10 g 10 g 10 g 1SFC101212C0201 Contactor types ABB | 5/209 AF09 ... AF80 4-pole contactors Technical data Magnet system characteristics Contactor types Coil operating limits acc. to IEC 60947-4-1 AC / DC operated AC supply DC supply AC control voltage 50/60 Hz Rated control circuit voltage Uc Coil consumption DC control voltage Rated control circuit voltage Uc Coil consumption Average pull-in value Average holding value PLC-output control Drop-out voltage Voltage sag immunity acc. to SEMI F47-0706 Dips withstand -20 °C ≤ θ ≤ +60 °C Operating time Between coil energization and: Between coil de-energization and: N.O. contact closing N.C. contact opening N.O. contact opening N.C. contact closing AF40 AF52 AF80 at θ ≤ 70 °C 0.85 x Uc min ... 1.1 x Uc max At θ ≤ 60 °C 0.85 x Uc min...1.1 x Uc max. At θ ≤ 70 °C (AF) 0.85 x Uc min...Uc max. - (AF..Z) 0.85 x Uc min...1.1 x Uc max. at θ ≤ 70 °C 0.85 x Uc min ... 1.1 x Uc max 24...500 V AC (AF) 50 VA - (AF..Z) 16 VA (AF) 2.2 VA / 2 W - (AF..Z) 1.7 VA / 1.5 W 40 VA 4 VA / 2 W 12...500 V DC (AF) 50 W - (AF..Z) 12...16 W (AF) 2 W - (AF..Z) 1.7 W (AF..Z) ≥ 500 mA 24 V DC ≤ 60 % of Uc min. 20...500 V DC 40 W 2 W ≤ 60 % of Uc min. (AF..Z) conditions of use on request conditions of use on request (AF..Z) 22 ms average for Uc ≥ 24 V 50/60 Hz or Uc ≥ 20 V DC 24 ms average 40...95 38...90 11...95 13...98 (1) (1) (1) (1) ms ms ms ms (1) On request. Mounting characteristics and conditions for use Contactor types Mounting positions AF09 AF16 Pos. 2 AF26 +30° AF38 AF40 AF52 AF80 -30° Pos. 4 Pos. 3 Pos. 1 Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) Pos. 1 ± 30° Pos. 5 Max. add-on N.C. auxiliary contacts: see accessory fitting details for a 4-pole contactor AF09 ... AF80 The contactors can be assembled side by side 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally 35 x 15 mm 2 x M4 or 2 x M6 screws placed diagonally 1SBC101991S0201 5 Average pull-in value Average holding value AF09 AF16 AF26 AF38 At θ ≤ 60 °C 0.85 x Uc min...1.1 x Uc max. At θ ≤ 70 °C 0.85 x Uc min...Uc max. 5/210 | ABB AF116 ... AF370 4-pole contactors Technical data Magnet system characteristics Contactor types Coil operating limits acc. to IEC 60947-4-1 Rated control circuit voltage Uc Coil consumption AC control voltage 50/60 Hz 24...60 V AC 48...130 V AC 100...250 V AC 250...500 V AC DC control voltage 20...60 V DC 48...130 V DC 100...250 V DC 250...500 V DC Drop-out voltage Operating time Coil supply between A1 - A2 Between coil energization and: Between coil de-energization and: AF116 AF140 AF190 AF205 At θ ≤ 70 °C 0.85 x Uc min ... 1.1 x Uc max At θ ≤ 70 °C 0.80 x Uc min ... 1.1 x Uc max 24...500 V AC, 20...500 V DC AF265 Average pull-in value Average holding value Average pull-in value Average holding value Average pull-in value Average holding value Average pull-in value Average holding value 225 VA 5.5 VA 170 VA 4 VA 130 VA 6 VA 205 VA 16 VA 165 VA 6 VA 175 VA 4 VA 220 VA 7 VA 185 VA 16 VA 475 VA 8.5 VA 340 VA 17 VA 385 VA 17.5 VA 420 VA 21 VA Average pull-in value Average holding value Average pull-in value Average holding value Average pull-in value Average holding value Average pull-in value Average holding value 210 W 2.5 W 130 W 2.5 W 135 W 3W 205 W 4W 55 % of Uc min 205 W 2.5 W 130 W 2.5 W 190 W 2.5 W 190 W 4W 400 W 3.5 W 360 W 2.5 W 410 W 4.5 W 600 W 4.7 W 20...55 ms 40..70 ms 25...60 ms 45...80 ms 30...60 ms 45...80 ms AC / DC operated AC supply DC supply N.O. contact closing N.O. contact opening AF305 AF370 5 Mounting characteristics and conditions for use Contactor types Mounting positions AC / DC operated AF116 AF140 Pos. 2 AF190 +30° AF205 AF265 AF305 AF370 -30° Pos. 4 Pos. 3 Pos. 1 Pos. 1 ± 30° Pos. 5 Pos. 6 Max. add-on N.O. or N.C. auxiliary contacts: see accessory fitting details for 4-pole contactor AF116 ... AF370 The contactors can be assembled side by side 4 x M5 1SFC101210C0201 Mounting distances Fixing On rail acc. to IEC 60715, EN 60715 By screws (not supplied) ABB | 5/211 EK550 ... EK1000 4-pole contactors Technical data Magnet system characteristics Contactor types Coil operating limits acc. to IEC 60947-4-1 AC control voltage Rated control circuit voltage Coil consumption 50 Hz 60 Hz 50 Hz Average pull-in value 60 Hz 50/60 Hz (1) 50 Hz Average holding value 60 Hz 50/60 Hz (1) Drop-out voltage in % of Uc min. Operating time Between coil energization and: Between coil de-energization and: N.O. contact closing N.C. contact opening N.O. contact opening N.C. contact closing EK550 EK1000 At θ ≤ 70 °C 0.85 x Uc min...1.1 x Uc max. Please also refer to "Mounting characteristics and conditions for use" 48...500 V 110...600 V 3500 VA 4000 VA 3800 / 3400 VA 125 VA / 50 W 140 VA / 60 W 140 VA /60 W approx. 45...65 % 30...60 25...55 10...20 13...23 ms ms ms ms (1) "A" coil voltage: see "Coil voltage code table". Magnet system characteristics Contactor types Coil operating limits acc. to IEC 60947-4-1 DC control voltage Rated control circuit voltage Coil consumption Drop-out voltage Coil time constant Open Closed Operating time Between coil energization and: Between coil de-energization and: DC operated DC supply Average pull-in value Average holding value L/R L/R N.O. contact closing N.C. contact opening N.O. contact opening N.C. contact closing EK550 EK1000 At θ ≤ 70 °C 0.85 x Uc min...1.1 x Uc max. Please also refer to "Mounting characteristics and conditions for use" 24...220 V 1100 W 20 W approx. 15...50 % of Uc min. 12 ms 60 ms 60...80 55...75 10...35 13...38 ms ms ms ms Mounting characteristics and conditions for use Contactor types Mounting positions AC / DC operated EK550 EK1000 Position 2 ABB Position 4 ABB +30 ABB -30 Position 5 Position 3 ABB E1863D1 Position 6 Position 1 Position 1 30 Max. N.O. or N.C. built-in and add-on N.O. or N.C. auxiliary contacts: see accessory fitting details for 4-pole contactor EK550, EK1000 Control voltage / Ambient temperature Mounting 1, 1±30°, 2, 3, 4, 5 positions 6 Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (supplied) (2) Damping elements are supplied. 5/212 | ABB at θ ≤ 70 °C at θ ≤ 70 °C 0.85…1.1 x Uc Unauthorized The contactors can be assembled side by side – 4 x M6 (2) 1SFC101211C0201 5 AC operated AC supply AF09 ... AF38 4-pole contactors Technical data Connecting characteristics Contactor types Main terminals AF09 Connection capacity (min. ... max.) Main conductors (poles) Rigid Solid (≤ 4 mm²) Stranded (≥ 6 mm²) Flexible with non insulated ferrule Flexible with insulated ferrule L Bars or lugs 1x 2x 1x 2x 1x 2x L< AF16 AF26 AF38 AF40 AF52 AF80 Screw terminals with cable clamp Screw terminals with double connector 2 x (5.5 width x 6.8 depth) Screw terminals with double connector 2 x (9.3 width x 7.9/10.3 depth) Screw terminals with double connector 2 x (12.4 width x 9.3/11.1 depth) 1...6 mm² 1...6 mm² 0.75...6 mm² 0.75...6 mm² 0.75...4 mm² 0.75...2.5 mm² 9.6 mm 1.5...16 1.5...16 1.5...16 1.5...16 1.5...16 1.5...16 - 6...35 mm² 6...35 mm² 4...35 mm² 4...35 mm² 4...35 mm² 4...35 mm² 9.2 mm 6...70 mm² 6...50 mm² 6...50 mm² 6...50 mm² 6...50 mm² 6...50 mm² 12.2 mm AWG 16...10 10 mm 1.5 Nm / 13 lb.in AWG 16...6 12 mm 2.5 Nm / 22 lb.in AWG 10...2 16 mm 4 Nm / 35 lb.in AWG 6...1 17 mm 6 Nm / 53 lb.in mm² mm² mm² mm² mm² mm² 5 6 Connection capacity acc. to UL/CSA Stripping length Tightening torque Auxiliary conductors (coil terminals) Rigid solid 1 or 2 x Flexible with non insulated ferrule Flexible with insulated ferrule L Lugs 1x 2x 1x 2x 1x 2x L< 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 8 mm 6 Coil terminals AWG 18...14 10 mm 1.2 Nm / 11 lb.in IP20 IP10 IP20 Delivered in open position, screws of unused terminals must be tightened M3.5 M4.5 M6 Screwdriver type Flat Ø 5.5 / Pozidriv 2 Flat Ø 6.5 / Pozidriv 2 M3.5 Screwdriver type Flat Ø 5.5 / Pozidriv 2 M8 hexagon socket (s = 4 mm) 1SBC101988S0201 1 or 2 x Connection capacity acc. to UL/CSA Stripping length Tightening torque Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Main terminals Coil terminals Screw terminals Main terminals ABB | 5/213 AF116 ... AF370 4-pole contactors Technical data Connecting characteristics AC / DC operated AF116 AF140 AF190 8 Nm – – – 1 x 10...70 mm² LD... included (1) 8 Nm 2 x 10...70 mm² LD... included (1) 1x 8 Nm 22 mm (.866 in) 6 mm (.236 in) LL... included 9 Nm / 80 lb.in 1 x AWG 6…3/0 LD... included (1) 8 Nm / 71 lb.in 2 x AWG 6…3/0 LD... included (1) 8 Nm / 71 lb.in Lugs W≤ Ø> Socket type Tightening torque Connection capacity acc. to UL / CSA Clamp type Tightening torque Connection capacity acc. to UL / CSA Clamp type Tightening torque Auxiliary conductors (coil terminals) Solid / stranded Flexible Flexible with non insulated ferrule Flexible with insulated ferrule l L Lugs 1x 2x 1x 2x 1x 2x 1x 2x L< l> 1 or 2 x Connection capacity acc. to UL / CSA Stripping length Tightening torque Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Main terminals Coil terminals Screw terminals Main terminals AF370 5 10 7 10...95 mm² LD... included (1) 8 Nm 2 x 10...95 mm² LD... included (1) 1x Tightening torque ø L AF305 19.5 5 ø 6.5 Tightening torque Al cable - Stranded Clamp type Tightening torque Cu cable - Flexible Clamp type Tightening torque Cu cable - Flexible Clamp type AF265 17.5 3 Connection capacity (min. ... max.) Main conductors (poles) Cu cable - Stranded Clamp type Tightening torque Cu cable - Stranded Clamp type 5 AF205 13 ø 8.5 ø 10.5 6...150 mm² 1SDA066917R1 14 Nm 50...120 mm² 1SFN074709R1000, LZ185-2C/120 16 Nm 95...185 mm² 1SDA054988R1 31 Nm 6...120 mm² 1SDA066917R1 14 Nm 50...95 mm² 1SFN074709R1000, LZ185-2C/120 16 Nm 24 mm (.945 in) 8 mm (.315 in) LL... included 18 Nm / 160 lb.in 6…300 MCM ATK185 (2) 34 Nm / 301 lb.in – – – 16...300 mm² 1SDA055016R1 25 Nm 70...185 mm² 1SCA022194R0890, OZXB4 22 Nm 185...240 mm² 1SDA055020R1 43 Nm 16...240 mm² 1SDA055016R1 25 Nm 70...185 mm² 1SCA022194R0890, OZXB4 22 Nm 32 mm (1.260 in) 10 mm (.394 in) LL... included 28 Nm / 248 lb.in 4…400 MCM ATK300 (2) 42 Nm / 372 lb.in 4…500 MCM ATK300/2 (2) 42 Nm / 372 lb.in M8 M10 14.3 Contactor types Main terminals Flat type 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 8 mm 3.5 mm AWG 18...14 9 mm 1.00 Nm / 9 lb.in IP00 IP20 M6 Screws and bolts Coil terminals (delivered in open position) M3.5 Screwdriver type Flat Ø 5.5 mm / Pozidriv 2 Screwdriver type 1SFC101213C0201 (1) LD... not included for AF116 ... AF146-30-..B. (2) Available in North America only. 5/214 | ABB EK550 ... EK1000 4-pole contactors Technical data Connecting characteristics AC or DC operated EK550 EK1000 40 15 8 E1864D E1868D 4.5 ø 11 ø 6.6 Connection capacity (min. ... max.) Main conductors (poles) Rigid with connector ø L Cu cable Al/Cu cable Al/Cu cable Bars or lugs Connection capacity acc. to UL/CSA Tightening torque Recommended Max. Auxiliary conductors (coil terminals) Rigid solid Flexible with ferrule l L Bars or lugs 1x 1x 2x L≤ Ø> 1 or 2 x 70...300 mm² 70...300 mm² 35...185 mm² 55 mm 10 mm 3 x 4 - 500 MCM 18 Nm / 160 Ib.in 22 Nm 1x 2x 1x 2x L≤ l> 1 or 2 x 0.5…2.5 mm² 0.5…2.5 mm² 0.5…2.5 mm² 0.5…2.5 mm² 8 mm 3.7 mm 18…14 AWG 1.00 Nm / 9 lb.in 1.20 Nm Connection capacity acc. to UL/CSA Tightening torque Recommended Max. Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Main terminals Coil terminals Screw terminals Main terminals Coil terminals (delivered in open positions) 95...300 mm² 95...300 mm² 5 - IP00 IP20 M10 Screws and bolts M3.5 Screwdriver type Flat Ø 5.5 mm / Pozidriv 2 1SFC101214C0201 Contactor types Main terminals Flat type ABB | 5/215 AF09 ... AF80 4-pole contactors Terminal marking and positioning AF09 ... AF38 contactors - AC / DC operated Standard devices without addition of auxiliary contacts A1 A2 A1 A2 1L1 3L2 5L3 7L4 R3 1 2T1 4T2 6T3 8T4 2 R4 R5 R6 7 AF09 ... AF80..-40-00 1L1 3L2 5L3 7L4 A2 2T1 4T2 6T3 8T4 A1 1 R3 R5 7 A2 2 R4 R6 8 8 A1 A2 A1 A2 A1 AF09 ... AF40..-22-00 AF80-22-00 AF09 ... AF80..-40-00 AF09 ... AF40..-22-00 AF80-22-00 5 Other possible contact combinations with auxiliary contacts added by the user A1 A2 A1 A2 A1 A2 A1 A2 1L1 3L2 5L3 7L4 1L1 3L2 5L3 7L4 1L1 3L2 5L3 7L4 1L1 3L2 5L3 7L4 13 1- = NO 14 + 1- 2T1 4T2 6T3 8T4 2T1 4T2 6T3 8T4 A1 A2 A1 A2 -3 13 21 NO NO -4 14 22 Combination 10 = AF09 ... AF80..-40-00 + CA4-10 1L1 3L2 5L3 7L4 NC A1 13 21 = + 14 22 A2 2T1 4T2 6T3 8T4 NO 2- -3 + 2T1 4T2 6T3 8T4 2T1 4T2 6T3 8T4 A1 A2 A1 A2 NO -1 + NC -4 -2 Combination 11 = AF09 ... AF80..-40-00 + CA4-10 + CA4-01 A1 A2 A1 A2 1L1 3L2 5L3 7L4 1L1 3L2 5L3 7L4 13 21 31 43 NC NO NC 14 22 A2 2T1 4T2 6T3 8T4 3L2 5L3 7L4 13 NO A2 2T1 4T2 6T3 8T4 NO 14 Combination 10 A1 1L1 3L2 5L3 7L4 13 21 NO NC A2 2T1 4T2 6T3 8T4 NO NC 14 22 Combination 11 A1 1L1 3L2 5L3 7L4 13 21 NO NC A2 2T1 4T2 6T3 8T4 NO NC 14 22 13 21 31 43 = + 14 22 32 44 NO NC NC NO 14 22 32 44 2T1 4T2 6T3 8T4 2T1 4T2 6T3 8T4 A1 A2 A1 A2 Combination 22 = AF09 ... AF80..-40-00 + CA4-22E Combination 11 A1 1L1 3L2 5L3 7L4 13 21 NO NC 31 NC 43 NO A2 2T1 4T2 6T3 8T4 NO NC 14 22 NC 32 NO 44 Combination 22 A1 A2 A1 A2 1L1 3L2 5L3 7L4 1L1 3L2 5L3 7L4 NO 13X 21X NC = NC 22X 14X NC NC + 22X 14X 2T1 4T2 6T3 8T4 A1 A2 Combination 11 = NO A1 1L1 3L2 5L3 7L4 13X 21X NO NC A2 2T1 4T2 6T3 8T4 NO NC 14X 22X 2T1 4T2 6T3 8T4 A1 A2 CAL4-11 + AF09 ... AF80..-40-00 Combination 11 Note: Only AF09..Z ... AF38..Z contactor with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole 5/216 | ABB 1SBC101480S0201 - Rev. A 13X 21X NO 1- = NC NO NC Combination 11 = AF09 ... AF80..-40-00 + CAT4-11E NO 2- 1L1 1L1 3L2 5L3 7L4 A1 13 21 NO 1- A1 AF116 ... AF370 4-pole contactors Terminal marking and positioning AF116 ... AF370 contactors - AC / DC operated Standard devices without addition of auxiliary contacts 3L2 1L1 5L3 A1 2T1 7L4 A2 4T2 A1 1L1 3L2 5L3 7L4 A2 2T1 4T2 6T3 8T4 8T4 6T3 AF116 ... AF370-40-00 5 AF116 ... AF370-40-00 Standard devices with factory mounted auxiliary contacts 3L2 A1 NO 13X 5L3 7L4 A2 1L1 3L2 A1 NO 13X 5L3 7L4 A2 43X NO NC 21X 31X NC NC 22X NC 22X 32X NC NO 14X NO 14X 44X NO NC 21X 2T1 4T2 AF116 ... AF370-40-11 6T3 8T4 2T1 4T2 AF116 ... AF370-40-22 6T3 A1 1L1 3L2 5L3 7L4 A2 2T1 4T2 6T3 8T4 13X NO 21X NC NO 14X NC 22X AF116 ... AF370-40-11 A1 1L1 3L2 5L3 7L4 13X NO 21X NC 31X NC 43X NO A2 2T1 4T2 6T3 8T4 NO 14X NC 22X NC 32X NO 44X 8T4 AF116 ... AF370-40-22 1SFC101215C0201 1L1 ABB | 5/217 EK 4-pole contactors Terminal marking and positioning EK550, EK1000 contactors - AC operated Standard devices 13 1L1 3L2 5L3 7L4 13 21 22 14 1L1 3L2 5L3 7L4 21 A1 2T1 4T2 6T3 5 3 1 13 7 14 8T4 A2 EK550, EK1000-40-11 2 6 4 14 8 31 22 21 32 2T1 4T2 6T3 8T4 22 EK550, EK1000-40-11 43 EK550, EK1000-40-22 A1 1 3 5 7 13 21 31 43 A2 2 4 6 8 14 22 32 44 44 EK550, EK1000-40-22 Other possible contact combinations with auxiliary contacts added by the user 53 13 1L1 3L2 5L3 7L4 1L1 3L2 5L3 7L4 43 83 13 43 53 83 61 21 31 71 21 31 61 71 62 22 32 72 22 32 62 72 54 14 44 84 14 44 54 84 2T1 4T2 6T3 8T4 Combination 44 = A1 1 3 5 7 13 21 31 43 53 61 71 83 A2 2 4 6 8 14 22 32 44 54 62 72 84 Combination 44 2T1 4T2 6T3 8T4 EK550, EK1000-40-22 + A1 1 3 5 7 13 21 31 43 A2 2 4 6 8 14 22 32 44 = EK550, EK1000-40-22 CAL16-11C + 53 61 54 62 + CAL16-11C + CAL16-11D 71 83 72 84 CAL16-11D EK550, EK1000 contactors - with multifrequency coil or DC operated Standard devices Resistor only for EK550, EK1000 13 1L1 3L2 5L3 7L4 47 35 21 22 36 14 48 2T1 4T2 6T3 8T4 V DC EK550, EK1000-40-21 { R1 35 A2 A1 36 13 14 21 22 47 48 1 L1 A1 A2 5 3 1 2 7 6 4 13 8 14 47 21 48 22 EK550, EK1000-40-21 2 T1 3 L2 4 T2 5 L3 6 T3 7 L4 8 T4 EK550, EK1000 DC operated Other possible contact combinations with auxiliary contacts added by the user Resistor only for EK550, EK1000 1L1 3L2 5L3 7L4 Resistor only for EK550, EK1000 1L1 3L2 5L3 7L4 47 13 47 53 61 21 35 21 35 61 62 22 36 22 36 62 48 14 48 54 53 13 54 14 2T1 4T2 6T3 8T4 Combination 32 = A1 1 3 5 7 13 21 47 53 61 A2 2 4 6 8 14 22 48 54 62 Combination 32 5/218 | ABB = 2T1 4T2 6T3 8T4 EK550, EK1000-40-21 + A1 1 3 5 7 13 21 47 A2 2 4 6 8 14 22 48 EK550, EK1000-40-21 + CAL16-11C 53 61 54 62 CAL16-11C 1SFC101216C0201 5 Notes N5 5 ABB | 5/219 AF09, AF16 4-pole contactors 5.5 0.22" 10 0.39" 35 1.38" 2x ø 4.2 0.17" M4 8-32 UNC 2x M4 8-32 UNC 70 2.76" ø 4.2 0.17" 5 0.20" 5.5 0.22" 35 1.38" 71 2.80" 5.5 0.22" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 6 0.24" 80 3.15" 6 0.24" 5.5 0.22" 80 3.15" 77 3.03" 71 2.80" 5 0.20" 45 1.77" 60 2.36" 77 3.03" 45 1.77" 70 2.76" mm, inches 60 2.36" Main dimensions 10 0.39" 5 0.20" AF09, AF16 5 0.20" AF09, AF16 5 110.5 4.35" 71 2.80" 77 3.03" 10 0.39" 12 0.47" 71 2.80" 45 1.77" 5.5 0.22" 35 mm EN/IEC 60715 6 0.24" 5.5 0.22" 43 1.69" 80 3.15" 35 mm EN/IEC 60715 6 0.24" 5.5 0.22" 80 3.15" 45 1.77" 5.5 0.22" 10 0.39" AF09, AF16 + CA4, CC4 1-pole auxiliary contact block AF09, AF16 + CAL4-11 2-pole auxiliary contact block 102.5 4.04" 110.5 4.35" 71 2.80" 10 0.39" 45 1.77" Note: contactor lateral distance to grounded component 2 mm 0.08" min. 5/220 | ABB 10 0.39" 5.5 0.22" 43 1.69" 5.5 0.22" AF09, AF16 + CAT4 2-pole auxiliary contact and coil terminal block 1SBC101485S0201 - Rev. A AF09, AF16 + CA4 4-pole auxiliary contact block 80 3.15" 5.5 0.22" 43 1.69" 35 mm EN/IEC 60715 80 3.15" 6 0.24" 5.5 0.22" 35 mm EN/IEC 60715 71 2.80" 45 1.77" AF09, AF16 4-pole contactors mm, inches 133.5 5.26" 45 1.77" 45 1.77" 2x M4 8-32 UNC 70 2.76" 5 0.20" 5.5 0.22" 60 2.36" 5.5 0.22" 35 mm EN/IEC 60715 1.1 0.04" 35 mm EN/IEC 60715 6 0.24" 80 3.15" 6 0.24" 35 1.38" ø 4.2 0.17" 5.5 0.22" 5.5 0.22" 80 3.15" 77 3.03" 710.39" 2.80" 10 71 2.80" 40.5 1.59" Main dimensions 10 0.39" 5 0.20" AF09, AF16 + TEF4 electronic timer AF09, AF16 5 102.5 4.04" 102.5 4.04" 71 71 2.80" 2.80" 10 10 0.39" 0.39" 2 x2 x M4M4 8-32 UNC 8-32 UNC 80 80 3.15" 3.15" 70 2.76" 70 2.76" 5 0.20" 5 0.20" 60 2.36" 60 2.36" 5.55.5 0.22" 0.22" 43 1.69" 43 1.69" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 91.5 3.60" 91.5 3.60" 5.55.5 0.22" 0.22" ø 4.2 0.17" ø 4.2 0.17" AF09..-40-00, AF16..-40-00 + VEM4 mechanical and electrical interlock set 5 0.20" 5 0.20" AF09..-40-00, AF16..-40-00 + VEM4 mechanical and electrical interlock set 1SBC101485S0201 - Rev. A 90 90 3.54" 3.54" Note: contactor lateral distance to grounded component 2 mm 0.08" min. ABB | 5/221 AF26, AF38 4-pole contactors mm, inches 5.5 0.22" ø 4.2 0.17" 5.5 0.22" 35 1.38" 2x M4 8-32 UNCø 4.2 0.17" 10 0.39" 10 0.39" 5 0.20" 2x M4 8-32 UNC 70 2.76" 35 mm EN/IEC 60715 80 3.15" 6 0.24" 35 mm EN/IEC 60715 6 0.24" 35 1.38" 5.5 0.22" 5 0.20" 95 3.74" 5.5 0.22" 80 3.15" 101 3.98" 95 3.74" 70 2.76" 45 1.77" 5 0.20" 60 2.36" 101 3.98" 45 1.77" 60 2.36" Main dimensions 5 0.20" AF26, AF38 AF26, AF38 5 101 3.98" 134.5 5.30" 95 3.74" 45 1.77" 12 0.47" 10 0.39" 95 3.74" 45 1.77" 5.5 0.22" 5.5 0.22" 35 mm EN/IEC 60715 6 0.24" 80 3.15" 43 1.69" 80 3.15" 35 mm EN/IEC 60715 6 0.24" 5.5 0.22" 5.5 0.22" 10 0.39" AF26, AF38 + CAL4-11 2-pole auxiliary contact block AF26, AF38 + CA4, CC4 1-pole auxiliary contact block 134.5 5.30" 126.5 4.98" 10 0.39" 45 1.77" Note: contactor lateral distance to grounded component 2 mm 0.08" min. 5/222 | ABB 80 3.15" 10 0.39" 5.5 0.22" 5.5 0.22" AF26, AF38 + CAT4 2-pole auxiliary contact and coil terminal block 1SBC101486S0201 - Rev. A AF26, AF38 + CA4 4-pole auxiliary contact block 43 1.69" 35 mm EN/IEC 60715 80 3.15" 6 0.24" 5.5 0.22" 5.5 0.22" 95 3.74" 43 1.69" 95 3.74" 35 mm EN/IEC 60715 45 1.77" AF26, AF38 4-pole contactors mm, inches 101 3.98" 157.5 6.20" 3.74" 10950.39" 45 1.77" 95 3.74" 45 1.77" ø 4.2 0.17" 2x M4 8-32 UNC 10 0.39" AF26, AF38 + TEF4 electronic timer 70 2.76" 5.5 0.22" 5 0.20" 35 mm EN/IEC 60715 5.5 0.22" 60 2.36" 1.1 0.04" 6 0.24" 35 mm 80 EN/IEC 3.15" 60715 6 0.24" 80 3.15" 35 1.38" 5.5 0.22" 5.5 0.22" 40.5 1.59" Main dimensions 5 0.20" AF26, AF38 5 126.5 4.98" 126.5 4.98" 80 3.15" 60 2.36" ø 4.2 0.17" ø 4.2 0.17" 5 0.20" AF26..-40-00, AF38..-40-00 + VEM4 mechanical and electrical interlock set 5 0.20" AF26..-40-00, AF38..-40-00 + VEM4 mechanical and electrical interlock set 1SBC101486S0201 - Rev. A 5.5 0.22" 2x 2x M4 8-32 UNC M4 8-32 UNC 70 2.76" 80 3.15" 5 0.20" 10 0.39" 5 0.20" 10 0.39" 60 2.36" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 91.5 3.60" 91.5 3.60" 5.5 0.22" 95 3.74" 5.5 0.22" 70 2.76" 95 3.74" 5.5 0.22" 43 1.69" 90 3.54" 43 1.69" 90 3.54" Note: contactor lateral distance to grounded component 2 mm 0.08" min. ABB | 5/223 AF40, AF52 4-pole contactors Main dimensions mm, inches 60 2.36" 113.5 4.47" 70 2.76" 2x M6 ¼-20 UNC ø 6.4 0.25" 110 4.33" 4.6 0.18" 5.5 0.22" 100 3.94" 119.5 4.70" 35 x 15 mm EN/IEC 60715 6 0.24" 7 0.28" 10 0.39" 5 0.20" AF40, AF52 AF40, AF52 5 147 5.79" 113.5 4.47" 70 2.76" 10 12 0.47" 0.39" 113.5 4.47" 70 2.76" 7 0.28" 6 0.24" 6 0.24" 7 0.28" 5.5 0.22" 35 x 15 mm EN/IEC 60715 119.5 4.70" 43 1.69" 119.5 4.70" 35 x 15 mm EN/IEC 60715 5.5 0.22" 10 0.39" AF40, AF52 + CAL4-11 2-pole auxiliary contact block AF40, AF52 + CA4, CC4 1-pole auxiliary contact block 147 5.79" 113.5 4.47" 139 5.47" 10 70 2.76" 0.39" 7 0.28" 113.5 4.47" 10 0.39" 7 0.28" 5.5 0.22" 43 1.69" 35 x 15 mm EN/IEC 60715 6 0.24" AF40, AF52 + CAT4 2-pole auxiliary contact and coil terminal block 1SBC101977S0201 AF40, AF52 + CA4 4-pole auxiliary contact block 119.5 4.70" 5.5 0.22" 43 1.69" 35 x 15 mm EN/IEC 60715 119.5 4.70" 6 0.24" 70 2.76" 5/224 | ABB AF40, AF52 4-pole contactors Main dimensions mm, inches 169.7 6.68" 113.5 4.47" 70 2.76" 60 2.36" 10 0.39" 6 0.24" 7 0.28" 2x M6 ¼-20 UNC ø 6.4 0.25" 4.6 0.18" 110 4.33" 5.5 0.22" 100 3.94" 40.5 1.59" 119.5 4.70" 35 x 15 mm EN/IEC 60715 1.1 0.04" 5 0.20" AF40, AF52 + TEF4 electronic timer AF40, AF52 5 113.5 4.47" 140 5.51" 2x M6 ¼-20 UNC 130 5.12" 110 4.33" 4.6 0.18" 5.5 0.22" 100 3.94" 119.5 4.70" 6 0.24" 7 0.28" 10 0.39" ø 6.4 0.25" 5 0.20" AF40, AF52 + VM96-4 mechanical interlock unit 1SBC101977S0201 AF40, AF52 + VM96-4 mechanical interlock unit ABB | 5/225 AF80 4-pole contactors Main dimensions mm, inches 80 3.15" 116 4.57" 90 3.54" 2x M6 ¼-20 UNC ø 6.4 0.25" 110 4.33" 4.6 0.18" 5.5 0.22" 100 3.94" 119.5 4.70" 35 x 15 mm EN/IEC 60715 6 0.24" 7 0.28" 10 0.39" 5 0.20" AF80 AF80 5 149 5.87" 116 4.57" 90 3.54" 10 12 0.47" 0.39" 116 4.57" 90 3.54" 7 0.28" 6 0.24" 6 0.24" 7 0.28" 5.5 0.22" 35 x 15 mm EN/IEC 60715 119.5 4.70" 43 1.69" 119.5 4.70" 35 x 15 mm EN/IEC 60715 5.5 0.22" 10 0.39" AF80 + CAL4-11 2-pole auxiliary contact block AF80 + CA4, CC4 1-pole auxiliary contact block 149 5.87" 171.8 6.76" 10 90 3.54" 0.39" 1.1 0.04" 35 x 15 mm EN/IEC 60715 119.5 4.70" 5.5 0.22" AF80 + TEF4 Electronic timer 1SBC101978S0201 43 1.69" 35 x 15 mm EN/IEC 60715 119.5 4.70" AF80 + CA4 4-pole auxiliary contact block 5.5 0.22" 10 0.39" 7 0.28" 6 0.24" 7 0.28" 116 4.57" 40.5 1.59" 116 4.57" 6 0.24" 90 3.54" 5/226 | ABB AF80 4-pole contactors Main dimensions mm, inches 116 4.57" 180 7.09" 2x M6 ¼-20 UNC 170 6.69" 110 4.33" 4.6 0.18" 5.5 0.22" 100 3.94" 119.5 4.70" 6 0.24" 7 0.28" AF80 + CA4, CC4 1-pole auxiliary contact block ø 6.4 0.25" 5 0.20" AF80 + VM96-4 mechanical interlock unit 5 1SBC101978S0201 10 0.39" ABB | 5/227 AF116, AF140 4-pole contactors Main dimensions mm, inches SECTION A-A A 150 5.91" 5 19.5 4.96" 128 5.04" 55.5 0.22" 120 4.72" 60 2.36" M4 8-32 UNC 100 3.94" 10 0.39" 30 1.18" AF116, AF140-40-00 + CAL19 2-pole auxiliary contact block AF116, AF140-40-11 AF116, AF140-40-..(B) SECTION A-A A 120 4.72" 150 5.91" 19.5 0.77" 128 5.04" 55.5 2.18" 10 0.39" 30 1.18" 1SFC101228C0201 AF116, AF140-40-00B + CAL19 2-pole auxiliary contact block AF116, AF140-40-11B 5/228 | ABB AF190, AF205 4-pole contactors Main dimensions mm, inches SECTION A-A 70 2.76" 152.5 6.00" A 35.5 1.40" 4X M5 10-24 UNC 5 0.20" 196 7.72" 165 6.50" 83.5 3.29" ø 8.5 0.33" 29.5 1.16" 140 5.51" 10 0.39" 5 35 1.38" AF190, AF205-40 1SFC101229C0201 AF190, AF205-40-00 + CAL19 2-pole auxiliary contact block AF190, AF205-40-11 ABB | 5/229 AF265, AF370 4-pole contactors Main dimensions mm, inches A 183.75 7.23" 180 7.09" 19.5 0.77" 35.5 1.40" 5 0.20" 225 8.86" 94.7 3.73" ø 10.5 0.41" 33.4 1.31" 10 0.39" 5 43.75 1.72" AF265, AF370-40-00 + CAL19 2-pole auxiliary contact block AF265, AF370-40-11 4X M5 10-24 UNC 187 7.36" 87.5 3.44" 1SFC101230C0201 AF265, AF370-40 5/230 | ABB EK550, EK1000 4-pole contactors AC operated Main dimensions 111) 0.43" mm, inches 111) 0.43" 270 10.63" 244 9.61" 225.5 8.88" ø 11 0.43" 2) 139.5 5.49" 5/L3 7/L4 2/T1 4/T2 6/T3 8/T4 200 7.87" 3/L2 6 0.24" M10 5) 3/8-16 UNC 223 8.78" 1/L1 272 10.71" 23 4) 0.91" 5 40 1.57" 3) 12.5 0.49" 25 0.98" 67 2.64" ø 6.2 0.24" 220 8.66" EK550 1) 11 0.43" 1) 270 10.63" 11 0.43" 244 9.61" ø11 0.43" 225.5 8.88" 2) 139.5 5.49" 8 0.31" 4) 23 0.91" M10 5) 3/8-16 UNC 5/L3 7/L4 2/T1 4/T2 6/T3 8/T4 20 0.79" 67 2.64" Dimension for extra auxiliary contact block Screw, nut and washer by-packed Min. distance to uninsulated wall Damping elements are included Earthing screw 223 8.78" 3/L2 299 11.77" 1/L1 1) 2) 3) 4) 5) 40 1.57" 3) 40 1.57" EK1000 200 7.87" F1 220 8.66" M6 1/4-20 UNC b) 271 10.67" - 282 11.1" - 293 11.54" c) 1SBC101651S0201 - Rev. A a) a) Min. dim Makes distance F1 = 70 b) Includes space for three auxiliary contact blocks between the contactors c) Includes space for four auxiliary contact blocks between the contactors EK1000 ABB | 5/231 EK550, EK1000 4-pole contactors DC operated Main dimensions mm, inches 296 11.65" 111) 0.43" 270 10.63" 244 9.61" ø 11 0.43" 225.5 8.88" 2) 139.5 5.49" 5/L3 7/L4 2/T1 4/T2 6/T3 8/T4 200 7.87" 3/L2 6 0.24" M10 5) 3/8-16 UNC 223 8.78" 1/L1 272 10.71" 23 4) 0.91" 5 40 1.57" 3) ø 6.2 0.24" 12.5 0.49" 25 0.98" 67 2.64" 220 8.66" EK550 1) 11 0.43" 296 11.65" 270 10.63" 244 9.61" ø 11 0.43" 225.5 8.88" 2) 139.5 5.49" 8 0.31" 4) 23 0.91" M105) 3/8-16 UNC 5/L3 7/L4 2/T1 4/T2 6/T3 8/T4 20 0.79" 67 2.64" Dimension for extra auxiliary contact block Screw, nut and washer by-packed Min. distance to uninsulated wall Damping elements are included Earthing screw 223 8.78" 3/L2 299 11.77" 1/L1 1) 2) 3) 4) 5) 3) 40 1.57" 40 1.57" EK1000 F1 220 8.66" M6 1/4-20 UNC a) 297 11.69" - 308 12.13" EK1000 5/232 | ABB b) 1SBC101653S0201 - Rev. A 200 7.87" a) Min. dim. b) Includes space for two auxiliary contact blocks and the dc-unit between the contactors Notes N10 5 ABB | 5/233 Summary_5-4 5 5/234 | ABB Contactors for DC switching General description 5/236 Selection table for DC switching AF09 ... AF96 contactors 5/238 AF116 ... AF2050 contactors 5/239 EK110 ... EK1000 contactors 5/240 Ordering details 100 A DC-1 GA75 AC operated 5/242 GAE75 DC operated 5/243 AC / DC operated 5/244 AC / DC operated 5/245 GAF1250 ... GAF2050 AC / DC operated 5/246 Main accessories 5/247 Technical data 5/248 Terminal marking and positionning 5/255 Main dimensions 5/256 Voltage code table 5/392 250 to 400 A DC-1 GAF185 ... GAF300 5 600 to 875 A DC-1 GAF460 ... GAF750 Summary_5-4 1040 to 1750 A DC-1 ABB | 5/235 Contactors for DC switching applications DC-1, DC-3, DC-5 applications according to IEC 60947-4-1 The circuit switching on DC is more difficult than on AC, as alternating current go to zero according to the frequency of the supply source while DC current has a continuous value. The main parameters to be considered for selecting a contactor are the current, the voltage and the L/R time constant of the controlled load. Time constant and utilization categories In DC applications, the nature of load to switch (resistor, inductance or a combination) is characterized by the ratio of the inductance to the resistance (L (inductance of operated circuit) / R (resistance of operated circuit) = mH/Ω = ms) This ratio L/R is called the time constant of the circuit. The higher the time constant value is, the more difficult it is to break the arc. The addition of a resistor in parallel with an inductive winding helps in the elimination of the arcs, by reducing the time constant. Operational voltage – – The higher the operational voltage value is, the more difficult it is to break the arc. – – The use of main poles connected in series will allow to increase the value of switched voltage. However, the maximum switched voltage must be within the max operational voltage of the contactor. All the poles required for breaking must be connected in series between the load and the source polarity not linked to earth (or chassis) (see recommended connection diagrams). ABB offer a large choice of possibilities for DC switching applications (see selection tables): – – Standard 3-pole or 4-pole contactors with either 1- pole breaking or breaking with poles connected in series. –– Special contactors designed for DC breaking with permanent magnets fitted on the main poles for use with the 3 poles connected in series and considered as 1-pole devices: -- GA75 and GAE75 contactors: the 3 poles are connected in series via two supplied and fitted insulated connections (25 mm²) - - GAF145 … GAF2050 contactors: the 3 poles must be connected in series by the user according to conductor cross-sectional area (refer to main pole technical data) or by using LP connection bars to be ordered separately. Selection tables The enclosed selection tables will guide your choice through all contactor variants according to utilization category, for operational voltage up to 1000 V DC-1 and operational current up to 2050 A in ambient temperatures from -25 °C up to 40 °C. For higher values of current or voltage or heavy DC switching applications see bar mounted R contactors. 1SBC101980S0201 5 DC current utilization categories are defined according to IEC 60947-4-1: –– DC-1 non inductive or slightly inductive loads, resistance furnaces (L/R ≤ 1 ms) –– DC-3 shunt motors: starting, plugging, inching, dynamic breaking of DC motors (L/R ≤ 2 ms) – – DC-5 series motors: starting, plugging, inching, dynamic breaking of DC motors (L/R ≤ 7.5 ms). 5/236 | ABB Connection diagrams Recommended connection In the example below, the 3 poles are connected in series without the load in between. This connection is recommended in systems according to the following configurations. + - Load Indirect earthed system (isolated system) Direct earthed system Centre earthed system 5 Alternative connection (not possible for GA75, GAE75) The load could be placed in between the contacts in a indirect earthed system. If not connected according to the configuration below, a fault to earth could result in one or two contacts breaking the full load which the contactor is not approved for. Load + - Indirect earthed system (isolated system) Points to consider The above relates to power circuit switching. The SCPD (Short Circuit Protection Device) must comply with applicable protection rules. 1SBC101980S0201 Polarity: For all GA, GAE, GAF types, connection polarities must be respected. (See instruction leaflet and see markings on the main terminals or the contactor front) ABB | 5/237 AF09 ... AF96 contactors DC circuit switching General The arc switching on DC is more difficult than on AC. –– For selecting a contactor it is essential to determine the current, the voltage and the L/R time constant of the controlled load –– For information, typical time constant values are quoted hereafter: non inductive loads such as resistance furnaces (L/R ≈ 1 ms), inductive loads such as shunt motors (L/R ≈ 2 ms) or series motors (L/R ≈ 7.5 ms) –– The addition of a resistor in parallel with an inductive winding helps in the elimination of the arcs –– All the poles required for breaking must be connected in series between the load and the source polarity not linked to earth (or chassis). Technical data –– The tables indicate for the standard contactors the Ie max. operating currents depending on: the utilization category (i.e. L/R) DC-1, DC-3, DC-5 as defined in the IEC 60947-4-1 publication, the operating voltage Ue and the pole coupling details. Ampere values quoted in these tables are valid for a -25…+70 °C temperature close to the contactors, as long as these values do not exceed the AC-1 Ampere values for the corresponding ambient temperature –– Max. switching frequency: 300 cycles/h. Selection table Contactor types AF09 AF12 3 or 4-pole AF26 3-pole 4-pole AF30 3-pole AF38 3-pole 4-pole AF40 3-pole AF52 3-pole AF65 3-pole AF80 3-pole AF96 3-pole A 45 45 45 45 45 45 45 45 45 - 50 50 50 50 50 50 - A 50 50 50 50 50 50 - A 55 55 55 55 55 55 55 55 55 - 70 70 70 70 70 70 - A 100 100 100 100 100 100 - A 105 105 105 105 105 105 - A 125 125 125 125 125 125 - A 130 130 130 130 130 130 - A A A A A A A A A A A 45 45 45 45 45 45 - Utilization category DC-3, L/R ≤ 2 ms ≤ 72 V 25 A 27 A 110 V 6 A 7A 220 V ≤ 72 V 25 A 27 A 110 V 25 A 27 A 220 V 6 A 7A ≤ 72 V 25 A 27 A 110 V 25 A 27 A 220 V 25 A 27 A ≤ 72 V 25 A 110 V 25 A 220 V 25 A 440 V 6 A - 30 A 8A 30 A 30 A 8A 30 A 30 A 30 A 30 A 30 A 30 A 8A 45 45 45 45 45 45 - A - 50 50 50 50 50 50 - A 50 50 50 50 50 50 - A - 70 70 70 70 70 70 - A 100 100 100 100 100 100 - A 105 105 105 105 105 105 - A 125 125 125 125 125 125 - A 130 130 130 130 130 130 - A Utilization category DC-5, L/R ≤ 7.5 ms ≤ 72 V 9 A 12 A 110 V 4 A 4A 220 V ≤ 72 V 25 A 27 A 110 V 10 A 15 A 220 V 4 A 4A ≤ 72 V 25 A 27 A 110 V 25 A 27 A 220 V 9 A 12 A ≤ 72 V 25 A 110 V 25 A 220 V 10 A 440 V 4 A - 16 A 4A 30 A 20 A 4A 30 A 30 A 16 A 30 A 30 A 20 A 4A 20 45 45 45 45 20 - A - 25 50 50 50 50 25 - A 25 50 50 50 50 25 - A - 70 70 70 70 70 70 - A 100 100 100 100 100 100 - A 105 105 105 105 105 105 - A 125 125 125 125 125 125 - A 130 130 130 130 130 130 - A Utilization category DC-1, L/R ≤ 72 V 25 110 V 10 220 V ≤ 72 V 25 110 V 25 220 V 10 ≤ 72 V 25 110 V 25 220 V 25 ≤ 72 V 25 110 V 25 220 V 25 440 V 10 ≤ 1 ms A 27 A 15 A 27 A 27 A 15 A 27 A 27 A 27 A A A A - For additional ratings ≥ 440 V, please consult us. 5/238 | ABB A A A A A A A A AF16 30 20 30 30 20 30 30 30 30 30 30 20 A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A 1SBC101911S0201 5 AF116 ... AF2050 contactors DC circuit switching 5 Selection table Contactor types AF116 AF140 AF190 AF205 AF265 AF305 AF370 AF400 AF460 AF580 AF750 AF1250 AF1350 AF1650 AF2050 3-pole Utilization category DC-1, L/R ≤ 1 ms ≤ 72 V 110 V ≤ 72 V 110 V 220 V ≤ 72 V 110 V 220 V 440 V 600 V 850 V 145 145 145 145 145 - A A A A A 160 160 160 160 160 - A A A A A 250 250 250 250 250 - A A A A A 275 275 275 275 275 - A A A A A 350 350 350 350 350 - A A A A A 400 400 400 400 400 - A A A A A 450 450 450 450 450 - A A A A A 600 600 600 600 600 600 600 600 600 600 - A A A A A A A A A A 700 700 700 700 700 700 700 700 700 700 - A A A A A A A A A A 800 800 800 800 800 800 800 800 800 800 800 A A A A A A A A A A A 1050 1050 1050 1050 1050 1050 1050 1050 1050 1050 1050 A A A A A A A A A A A 1250 1250 1250 1250 1250 1250 1250 1250 1250 1250 A A A A 600 600 600 600 600 600 600 600 600 600 A A A A A A A A A A 700 700 700 700 700 700 700 700 700 700 A A A A A A A A A A 800 800 800 800 800 800 800 800 800 800 A A A A A A A A A A 1050 1050 1050 1050 1050 1050 1050 1050 1050 1050 A A A A A A A A A A - - - - 600 600 600 600 600 600 600 600 600 600 A A A A A A A A A A 700 700 700 700 700 700 700 700 700 700 A A A A A A A A A A 800 800 800 800 800 800 800 800 800 800 A A A A A A A A A A 1050 1050 1050 1050 1050 1050 1050 1050 1050 1050 A A A A A A A A A A - - - - A A A A A A 1350 1350 1350 1350 1350 1350 1350 1350 1350 1350 A A A A A A A A A A 1650 1650 1650 1650 1650 1650 1650 1650 1650 1650 A A A A A A A A A A 2050 2050 2050 2050 2050 2050 2050 2050 2050 2050 A A A A A A A A A A Utilization category DC-3, L/R ≤ 2 ms ≤ 72 V 110 V ≤ 72 V 110 V 220 V ≤ 72 V 110 V 220 V 440 V 600 V 145 145 145 145 145 - A A A A A 160 160 160 160 160 - A A A A A 250 250 250 250 250 - A A A A A 275 275 275 275 275 - A A A A A 350 350 350 350 350 - A A A A A 400 400 400 400 400 - A A A A A 450 450 450 450 450 - A A A A A Utilization category DC-5, L/R ≤ 7.5 ms ≤ 72 V 110 V ≤ 72 V 110 V 220 V ≤ 72 V 110 V 220 V 440 V 600 V 145 145 145 145 145 - A A A A A 160 160 160 160 160 - A A A A A 250 250 250 250 250 - A A A A A 275 275 275 275 275 - A A A A A 350 350 350 350 350 - A A A A A 400 400 400 400 400 - A A A A A 450 450 450 450 450 - A A A A A 1SBC101944S0201 For additional ratings ≥ 440 V, please consult us. ABB | 5/239 EK110 ... EK1000 contactors DC circuit switching Selection table Contactor types EK150 EK175 EK210 EK370 EK550 EK1000 120 120 200 200 200 200 200 200 – – 200 200 200 200 – 145 145 200 200 200 200 200 200 – – 200 200 200 200 – 210 210 300 300 300 300 300 300 210 – 300 300 300 260 260 210 210 300 300 300 300 300 300 210 – 300 300 300 260 260 370 370 550 550 550 550 550 550 450 450 550 550 550 450 450 550 550 800 800 800 800 800 800 650 650 800 800 800 650 650 – – – – – – – – – – – – – – – 120 135 135 135 135 135 135 – – 135 135 135 135 – 145 145 135 135 145 135 135 – – 145 135 135 135 – 210 210 210 210 210 210 210 210 – 210 210 210 210 170 210 210 210 210 210 210 210 210 – 210 210 210 210 210 370 450 450 450 450 450 450 450 450 450 450 450 450 450 550 650 650 650 650 650 650 650 650 650 650 650 650 650 – – – – – – – – – – – – – – 135 135 135 135 135 135 – – 135 135 135 135 – 145 135 135 145 135 135 – – 145 135 135 135 – 210 210 210 210 210 210 210 – 210 210 210 210 170 210 210 210 210 210 210 210 – 210 210 210 210 210 450 450 450 450 450 450 450 450 450 450 450 450 450 650 650 650 650 650 650 650 650 650 650 650 650 650 – – – – – – – – – – – – – A 832D A 831D A 830D A 829D Utilization category DC-1, L/R ≤ 1 ms ≤ 72 V 110 V ≤ 72 V 110 V 220 V ≤ 72 V 110 V 220 V 440 V 600 V ≤ 72 V 110 V 220 V 440 V 600 V A A A A A A A A A A A A A A A A 832D A 831D A 830D A 829D Utilization category DC-3, L/R ≤ 2 ms ≤ 72 V ≤ 72 V 110 V 220 V ≤ 72 V 110 V 220 V 440 V 600 V ≤ 72 V 110 V 220 V 440 V 600 V A A A A A A A A A A A A A A 5/240 | ABB ≤ 72 V 110 V 220 V ≤ 72 V 110 V 220 V 440 V 600 V ≤ 72 V 110 V 220 V 440 V 600 V A A A A A A A A A A A A A 1SBC101986S0201 A 831D A 830D Utilization category DC-5, L/R ≤ 7.5 ms A 832D 5 EK110 Notes N6 5 ABB | 5/241 GA75 1-pole contactors 100 A DC-1 AC operated 1SBC586544F0301 Description GA75-10-11 GA75 contactors are designed for controlling shunt or series motors and resistive or slightly inductive loads up to 1000 V DC. These contactors are of the block type design with 3 main poles connected in series. –– main poles arc chutes fitted with permanent magnets specially designed for DC breaking. The connection polarities must be respected. –– control circuit: AC operated –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details IEC Rated operational current θ ≤ 55 °C 440 V DC-1 A 100 5 UL / CSA Rated control circuit General use rating voltage Uc (1) 440 V DC A 100 Auxiliary Type contacts fitted V 50 Hz 24 V 60 Hz 24 48 48 110 110…120 220…230 230…240 230…240 240…260 380…400 400…415 400…415 415…440 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 GA75-10-00 GA75-10-11 GA75-10-00 GA75-10-11 GA75-10-00 GA75-10-11 GA75-10-00 GA75-10-11 GA75-10-00 GA75-10-11 GA75-10-00 GA75-10-11 GA75-10-00 GA75-10-11 Order code Weight Pkg (1 pce) 1SBL411025R8100 1SBL411025R8111 1SBL411025R8300 1SBL411025R8311 1SBL411025R8400 1SBL411025R8411 1SBL411025R8000 1SBL411025R8011 1SBL411025R8800 1SBL411025R8811 1SBL411025R8500 1SBL411025R8511 1SBL411025R8600 1SBL411025R8611 kg 1.220 1.260 1.220 1.260 1.220 1.260 1.220 1.260 1.220 1.260 1.220 1.260 1.220 1.260 (1) Other control voltages see voltage codes table. 35 mm x15 EN/IEC 60715 mm, inches 70 2.76" 110 4.33" 6 0.24" 6.5 0.26" GA75-10-11 10 0.39" 72 2.83" 10 0.39" 1SBC101423S0201 11 0.43" 12 0.47" 5/242 | ABB 108 4.25" 72 2.83" 4 0.16" 75 mm EN/IEC 60715 11 0.43" Main dimensions GAE75 1-pole contactors 100 A DC-1 DC operated Description Ordering details IEC Rated operational current θ ≤ 55 °C 440 V DC-1 A 100 UL/CSA Rated control circuit General use rating voltage Uc (1) 440 V DC A 100 Auxiliary Type contacts fitted V DC 12 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 24 48 60 110 125 220 240 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 GAE75-10-00 GAE75-10-11 GAE75-10-00 GAE75-10-11 GAE75-10-00 GAE75-10-11 GAE75-10-00 GAE75-10-11 GAE75-10-00 GAE75-10-11 GAE75-10-00 GAE75-10-11 GAE75-10-00 GAE75-10-11 GAE75-10-00 GAE75-10-11 Order code Weight Pkg (1 pce) 1SBL419025R8000 1SBL419025R8011 1SBL419025R8100 1SBL419025R8111 1SBL419025R8300 1SBL419025R8311 1SBL419025R8400 1SBL419025R8411 1SBL419025R8600 1SBL419025R8611 1SBL419025R8700 1SBL419025R8711 1SBL419025R8800 1SBL419025R8811 1SBL419025R8900 1SBL419025R8911 5 kg 1.260 1.300 1.260 1.300 1.260 1.300 1.260 1.300 1.260 1.300 1.260 1.300 1.260 1.300 1.260 1.300 (1) Other control voltages see voltage codes table. mm, inches 35 mm x15 EN/IEC 60715 Main dimensions 82 3.23" 108 4.25" 72 2.83" 6 0.24" 6.5 0.26" 12 0.47" 10 0.39" 72 2.83" 1SBC101424S0201 11 0.43" 4 0.16" 75 mm EN/IEC 60715 11 0.43" GAE75-10-11 These contactors are of the block type design with 3 main poles connected in series. –– main poles arc chutes fitted with permanent magnets specially designed for DC breaking. The connection polarities must be respected. –– control circuit: DC operated with double winding coil (and factory mounted lagging contact for "holding" winding insertion) –– add-on auxiliary contact blocks for side mounting and a wide range of accessories 110 4.33" 1SBC586554F0301 GAE75 contactors are designed for controlling shunt or series motors and resistive or slightly inductive loads up to 1000 V DC. 10 0.39" GAE75-10-11 ABB | 5/243 GAF185 ... GAF300 3-pole contactors 250 to 400 A DC-1 AC / DC operated with 1 N.O. + 1 N.C. auxiliary contact Description GAF185 ... GAF300 contactors are designed for controlling resistive or slightly inductive loads up to 1000 V DC. 1SFC101098F0001 These contactors are of the block type design with 3 main poles for connection in series by the user according to conductor cross-sectional area or by using LP connection bars to be ordered separately. –– main poles arc chutes fitted with permanent magnets specially designed for DC breaking. The connection polarities must be respected. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 3 coils to cover control voltages between 48...250 V 50/60 Hz and 20...250 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. GAF185-10-11 5 1SFC101099F0001 Ordering details GAF300-10-11 IEC Rated operational current θ ≤ 55 °C 1000 V DC-1 A 250 UL / CSA General use rating θ ≤ 40 °C 1000 V DC Rated control circuit voltage Uc A 250 (2) 400 400 V 50/60 Hz 48…130 100…250 48…130 100…250 V DC 20…60 48…130 100…250 20…60 48…130 100…250 Auxiliary Type contacts fitted 1 1 1 1 1 1 1 1 1 1 1 1 Order code Weight Pkg (1 pce) GAF185-10-11 (1) GAF185-10-11 GAF185-10-11 GAF300-10-11 (1) GAF300-10-11 GAF300-10-11 kg 3.600 3.600 3.600 6.200 6.200 6.200 1SFL497025R7211 1SFL497025R6911 1SFL497025R7011 1SFL557025R7211 1SFL557025R6911 1SFL557025R7011 (1) The connection polarities indicated close to the coil terminals must be respected: A1 for the positive pole and A2 for the negative pole. (2) At 660 V DC. Main dimensions mm, inches 12 0.47" 111.5 4.39" 105 4.13" ø 8.5 0.33" 160 6.3" 35.5 1.4" 140 5.51" 17.5 0.69" 180.5 7.11" ø 10.2 0.4" 35.5 1.4" 5 0.2" 5 0.2" GAF185 5/244 | ABB 43.75 1.72" GAF300 1SFC101023C0201 - Rev. A 35 1.38" 227 8.94" 219 8.62" 196 7.72" 187 7.36" 14 0.55" 17.5 0.69" 10 0.39" 12 0.47" GAF460 ... GAF750 3-pole contactors 600 to 875 A DC-1 AC / DC operated with 1 N.O. + 1 N.C. auxiliary contact Description GAF460 ... GAF750 contactors are designed for controlling resistive or slightly inductive loads up to 1000 V DC. 1SFC101100F0001 These contactors are of the block type design with 3 main poles for connection in series by the user according to conductor cross-sectional area or by using LP connection bars to be ordered separately. –– main poles arc chutes fitted with permanent magnets specially designed for DC breaking. The connection polarities must be respected. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 48...500 V 50/60 Hz and 24...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. GAF460-10-11 5 UL / CSA General use rating θ ≤ 40 °C 1000 V DC Rated control circuit voltage Uc A 650 875 900 V 50/60 Hz 48…130 100…250 250…500 48…130 100…250 250…500 V DC 24…60 48…130 100…250 250…500 24…60 48…130 100…250 250…500 Auxiliary Type contacts fitted 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Order code Weight Pkg (1 pce) GAF460-10-11 (1) GAF460-10-11 GAF460-10-11 GAF460-10-11 GAF750-10-11 (1) GAF750-10-11 GAF750-10-11 GAF750-10-11 kg 12.000 12.000 12.000 12.000 15.000 15.000 15.000 15.000 1SFL597025R6811 1SFL597025R6911 1SFL597025R7011 1SFL597025R7111 1SFL637025R6811 1SFL637025R6911 1SFL637025R7011 1SFL637025R7111 (1) The connection polarities indicated close to the coil terminals must be respected: A1 for the positive pole and A2 for the negative pole. GAF460 ... GAF750 are equipped with low voltage inputs for control, for example by a PLC. Control inputs mm, inches 210 8.27" 216 8.5" 48.5 1.91" 40 1.57" 6 0.24" 63 2.48" GAF460 22.5 0.89" ø6.5 0.26" ø12.5 0.49" 242 9.53" 48.5 1.91" 6 0.24" 1SFC101024C0201 - Rev. A ø10.5 0.41" 11.5 0.45" ø6.5 0.26" 283 11.14" 22.5 0.89" 273 10.75" 186 7.32" 25 0.98" 11.5 0.45" Main dimensions 278 10.94" GAF750-10-11 IEC Rated operational current θ ≤ 55 °C 1000 V DC-1 A 600 268 10.55" 1SFC101102F0001 Ordering details 72 2.83" GAF750 ABB | 5/245 GAF1250 ... GAF2050 3-pole contactors 1040 to 1750 A DC-1 AC / DC operated with 1 N.O. + 1 N.C. auxiliary contact Description GAF1250 ... GAF2050 contactors are designed for controlling resistive or slightly inductive loads up to 1000 V DC. 1SFC101004F0201 These contactors are of the block type design with 3 main poles for connection in series by the user according to conductor cross-sectional area or by using LP connection bars to be ordered separately. –– main poles arc chutes fitted with permanent magnets specially designed for DC breaking. The connection polarities must be respected. –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 coils to cover control voltages between 48...500 V 50/60 Hz and 24...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. GAF1250-10-11 5 1SFC101004F0201 Ordering details GAF1650-10-11 IEC Rated operational current θ ≤ 55 °C 1000 V DC-1 A 1040 UL / CSA General use rating θ ≤ 40 °C 1000 V Rated control circuit voltage Uc A 1210 1450 1750 1650 2050 V 50/60 Hz 48…130 100…250 250…500 100…250 100…250 Auxiliary Type contacts fitted V DC 24…60 48…130 100…250 250…500 100…250 100…250 1 1 1 1 1 1 1 1 1 1 1 1 Order code Weight Pkg (1 pce) GAF1250-10-11 GAF1250-10-11 GAF1250-10-11 GAF1250-10-11 GAF1650-10-11 GAF2050-10-11 kg 16.000 16.000 16.000 16.000 35.000 35.000 1SFL647025R6811 1SFL647025R6911 1SFL647025R7011 1SFL647025R7111 1SFL677025R7011 1SFL707025R7011 GAF1250 ... AF2050 are equipped with low voltage inputs for control, for example by a PLC Control inputs 40 1.57" 27 27 27 1.06" 1.06" 13 0.51" 13 0.51" ø 13.5 ø 13.540 0.53" 0.53"1.57" 17 0.67" 17 0.67" 40 1.57" 17 0.67" 17 0.67" AF2050 GAF1650 GAF2050 40 1.57" 40 1.57" 136 5.35" 136 5.35" 3 0.12" 136 5.35" 136 5.35" 136 5.35" 136 5.35" 242 9.53" 3 3 0.12" 0.12" GAF1250 5/246 | ABB 210 8.27" 72 2.83" 46.5 18.3" 8 0.31" 1SFC101125F0001 72 2.83" ø13 0.51" 1SFC101124F0001 312 12.28" 80 3.15" 104 4.09" 80 80 136 5.35" 136 5.35"ø9 0.35" ø9 0.35" 3.15" 3.15" 104 104 4.09" 4.09" 438 17.24" 438 17.24" GAF1650, GAF2050 312 12.28" 312 12.28" 392 15.43" 392 15.43" 249 9.8" 263 10.35" 313 12.32" 344 13.54" 392 15.43" 1.06" 136 5.35" ø9 0.35" 47 1.85" 438 17.24" 47 1.85" 47 10 0.39" 10 0.39" 1.85" 244 9.61" 244 9.61" 10 0.39" 1SFC101025C0201 - Rev. A ø 7 0.28" 72 2.83" 17 0.67" 30 1.18" AF2050AF2050 AF1350,AF1350, AF1650AF1650 50 1.97" 27 40 1.57" 10 0.39" AF1350, AF1650 10 0.39" 10 0.39" mm, inches 40 1.57" 17 0.67" 13 0.51" 30 1.18" 30 1.18" Main dimensions ø 13.5 0.53" 1.06" 40 1.57" 40 1.57" 244 9.61" 1SFC101114F0001 GAF185 ... GAF2050 3-pole contactors Main accessories Ordering details For contactors Auxiliary Type contacts Order code Pkg qty LP185 kg Auxiliary contact blocks, low energy microswitch 0.1 A, N.O. or N.C. GAF185 ... GAF2050 0 1 CEL18-01 1SFN010716R1001 1 0 CEL18-10 1SFN010716R1010 Connection bar for contactor GAF185 GAF300 GAF460 GAF750 GAF1250 GAF1650, GAF2050 LP185 LP300 LP460 LP750 LP1250 LP2050 1SFN074712R1000 1SFN075112R1000 1SFN075712R1000 1SFN076112R1000 1SFN076412R1000 1SFN076512R1000 0.050 0.050 2 2 4 4 2 4 0.300 0.400 0.550 0.950 1.900 2.900 5 1SFC101185C0201 1SFC101117F0001 LP2050 Weight (1 pce) ABB | 5/247 GA75 ... GAF2050 contactors Technical data Main pole - Utilization characteristics according to IEC Contactor types AC operated DC operated AC / DC operated Standards Rated operational voltage Ue max. Rated frequency (without derating) DC-1 Utilization category, L/R ≤ 1 ms For air temperature close to contactor Ie / Rated operational current DC-1 θ ≤ 40 °C θ ≤ 55 °C 5 θ ≤ 70 °C DC-5 Utilization category, L/R ≤ 7.5 ms Ie / Rated operational current DC-5 θ ≤ 55 °C GAF185 GAF300 GAF460 GAF750 IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 1000 V DC 50 / 60 Hz 220 V 440 V 600 V 1000 V 220 V 440 V 600 V 1000 V 220 V 440 V 600 V 1000 V 120 A 100 A 75 A 35 A 100 A 100 A 75 A 35 A 85 A 85 A 75 A 35 A (1) 275 250 180 150 220 V 440 V 100 A 85 A - 220 V 440 V 85 A 35 A 300 cycles/h With conductor cross-sectional area DC-3 Utilization category, L/R ≤ 2 ms Ie / Rated operational current DC-3 θ ≤ 55 °C GA75 GAE75 Maximum electrical switching frequency GAF1250 GAF1650 GAF250 A 500 A 700 A 1050 A 1250 A 1650 A 2050 A A 400 A 600 A 875 A 1040 A 1450 A 1750 A A mm² 325 A 300 mm² (2) 480 A 2x 240 mm² 720 A 2x 50x8 mm² 875 A 1270 A 1500 A 2x 3x 4x 100x5 mm² 100x5 mm² 100x5 mm² (1) Refer to IEC 60947-1, table 9. (2) For currents above 450 A, use 300 mm² and terminal extension/enlargement pieces (LX300/LW300). Main pole - Utilization characteristics according to UL / CSA Contactor types Standards Maximum operational voltage UL / CSA DC general use rating θ ≤ 40 °C Maximum electrical switching frequency AC operated DC operated AC / DC operated 440 V 600 V 1000 V GA75 GAE75 GAF185 GAF300 GAF460 GAF750 GAF1250 UL 508, CSA C22.2 N°14 UL 60947-4-1, CSA C22.2 N°60947.4-1 1000 V DC 100 A 75 A 250 A 35 A (3) 300 cycles/h 400 A 400 A 650 A 900 A 1210 A GAF1650 GAF250 1650 A 2050 A 1SBC101982S0201 (3) On request. 5/248 | ABB GA75 and GAE75 contactors Technical data General technical data AC operated DC operated Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL Rated impulse withstand voltage Uimp. Ambient air temperature close to contactor Operation Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency Shock withstand acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 C1 A A B1 B2 C2 GA75 GAE75 1000 V 600 V 8 kV -40…+70 °C -60...+80 °C acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II 3000 m 10 millions operating cycles (5 millions for GAE75) 3600 cycles/h Shock direction A B1 B2 C1 C2 5 1/2 sinusoidal shock for 11 ms: no change in contact position, closed or open position 20 g 10 g closed position / 5 g open position 15 g 20 g 20 g 1SBC101983S0201 Contactor types ABB | 5/249 GAF185 ... GAF2050 contactors Technical data General technical data C1 A ABB A B1 B2 C2 Shock direction A B1 B2 C1 C2 GAF185 GAF300 GAF460 GAF750 GAF1250 GAF1650 GAF2050 1000 V 600 V 8 kV -40 to +70 °C -40 to +70 °C acc. to IEC 60068-2-30 3000 m 5 millions operating cycles 300 cycles/h 0.5 millions operating cycles 60 cycles/h 1/2 sinusoidal shock for 30 ms: no change in contact position, closed or open position 5g 5g 5g 5g 5g - 1SFC101178C0201 5 AC / DC operated Contactor types Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL Rated impulse withstand voltage Uimp. Ambient air temperature close to contactor Operation Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency Shock withstand acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 5/250 | ABB GA75 and GAE75 contactors Technical data Magnet system characteristics Contactor types Coil operating limits acc. to IEC 60947-4-1 AC control voltage Rated control circuit voltage Uc Coil consumption AC operated AC supply Average pull-in value Average holding value Drop-out voltage Operating time Between coil energization and: at 50 Hz at 60 Hz 50 Hz 60 Hz 50/60 Hz (1) 50 Hz 60 Hz 50/60 Hz (1) N.O. contact closing N.C. contact opening N.O. contact opening N.C. contact closing Between coil de-energization and: GA75 At θ ≤ 55 °C 0.85...1.1 x Uc Please also refer to "Mounting characteristics and conditions for use" 24…690 V 24…690 V 180 VA 210 VA 190 VA / 180 VA 18 VA / 5.5 W 18 VA / 5.5 W 18 VA / 5.5 W Approx. 40...65 % of Uc 8…27 7…22 4…11 7…14 5 ms ms ms ms (1) 50/60 Hz coils: see "Voltage code table". Magnet system characteristics Contactor types Coil operating limits acc. to IEC 60947-4-1 DC control voltage Rated control circuit voltage Uc Coil consumption DC operated AC supply Average pull-in value Average holding value Drop-out voltage Coil time constant Open Closed Operating time Between coil energization and: L/R L/R N.O. contact closing N.C. contact opening Between coil de-energization and: N.O. contact opening (1) N.C. contact closing (1) GAE75 At θ ≤ 55 °C 0.85...1.1 x Uc Please also refer to "Mounting characteristics and conditions for use" 12…250 V DC 200 W 4W Approx. 15...40 % of Uc 3 ms 15 ms 13…30 ms 10…27 ms 5…15 ms 8…18 ms (1) The use of surge suppressors increases the opening time with a factor of 1.1 to 1.5 for a RV5 surge suppressor and a factor of 1.5 to 3 for RT5 surge suppressor. Mounting characteristics and conditions for use Contactor types AC operated DC operated GA75 GAE75 Mounting positions Pos. 2 +30° -30° Pos. 4 Pos. 3 Pos. 1 6 at θ ≤ 55 °C at θ ≤ 70 °C at θ ≤ 55 °C at θ ≤ 70 °C Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) Pos. 5 Pos. 6 0.85…1.1 x Uc Uc 0.95...1.1 x Uc Unauthorized The contactors can be assembled side by side 1SBC101981S0201 Control voltage / Ambient temperature Mounting 1, 1±30°, 2, 3, 4, 5 positions Pos. 1 ± 30° 35 x 15 mm or 75 x 25 mm 2 x M6 screws placed diagonally ABB | 5/251 GAF185 ... GAF2050 contactors Technical data Magnet system characteristics Contactor types Coil operating limits acc. to IEC 60947-4-1 AC control voltage 50/60 Hz Rated control circuit voltage Uc Coil consumption DC control voltage Rated control circuit voltage Uc Coil consumption Between coil de-energization and: Control input for PLC's Between coil energization and: Between coil de-energization and: AC or DC supply Average pull-in value Average holding value Average pull-in value Average holding value GAF185 GAF300 GAF460 GAF750 GAF1250 At θ ≤ 70 °C 0.85 x Uc min...1.1 x Uc max. Please also refer to "Mounting characteristics and conditions for use" GAF1650 GAF2050 48...250 V AC 48…500 V AC 430 VA 470 VA 890 VA 850 VA 12 VA / 3.5 W 10 VA / 2.5 W 12 VA / 4 W 12 VA / 4.5 W 100…250 V AC 1900 VA 48 VA / 17 W 20…250 V DC 500 W 520 W 2W 55 % of Uc min. 24…500 V DC 990 W 950 W 4W 4.5 W 100…250 V DC 1700 W 16 W 50…80 50…80 35…55 35…55 ms ms ms ms 40…65 40…65 10…30 10…30 ms ms ms ms ≥ 20 ms N.O. contact closing N.C. contact opening N.O. contact opening N.C. contact closing 30…115 ms 30…115 ms 25…80 ms 25…80 ms 50…120 ms 50…120 ms 33…70 ms 33…70 ms N.O. contact closing N.C. contact opening N.O. contact opening N.C. contact closing - 40…60 40…60 10…30 10…30 ms ms ms ms 40...90 ms 40...90 ms Mounting characteristics and conditions for use Contactor types Mounting positions AC / DC operated GAF185 GAF300 Pos. 2 +30° GAF460 GAF750 GAF1250 GAF1650 GAF2050 -30° Pos. 4 Pos. 3 Pos. 1 Control voltage / Ambient temperature Mounting 1, 1±30°, 2, 3, 4, 5 positions 6 Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) at θ ≤ 70 °C Pos. 1 ± 30° Pos. 5 Pos. 6 0.85 x Uc min…1.1 x Uc max. Unauthorized The contactors can be assembled side by side – 4 x M5 4 x M6 4 x M8 1SFC101177C0201 5 Drop-out voltage Dips withstand -20 °C ≤ θ ≤ +60 °C Operating time Coil supply between A1 - A2 Between coil energization and: AC / DC operated 5/252 | ABB GA75 and GAE75 contactors Technical data Connecting characteristics Contactor types AC operated DC operated GA75 GAE75 Main terminals Screw terminals with single connector (13 x 10 mm) Connection capacity (min. ... max.) Main conductors (poles) Rigid Solid (≤ 4 mm²) Stranded (≥ 6 mm²) Flexible with ferrule Bars or lugs Connection capacity acc. to UL/CSA Tightening torque Recommended Max. Auxiliary conductors (coil terminals) Rigid solid Flexible with ferrule l L Lugs 6...50 mm² 6...25 mm² 6...35 mm² 6...16 mm² – – AWG 8…1 4.00 Nm / 35 lb.in 4.50 Nm 1x 2x 1x 2x L≤ l> 1 or 2 x 1…4 mm² 1…4 mm² 1…2.5 mm² 0.75…2.5 mm² 8 mm 3.7 mm AWG 18...14 Connection capacity acc. to UL / CSA Tightening torque Coil terminals Recommended Max. Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Main terminals Coil terminals Screw terminals Main terminals Coil terminals 5 1.00 Nm / 9 lb.in 1.20 Nm IP10 IP20 Delivered in open position, screws of unused terminals must be tightened M6 Screwdriver type Flat Ø 6.5 / Pozidriv 2 M3.5 Screwdriver type Flat Ø 5.5 / Pozidriv 2 1SBC101984S0201 l L 1x 2x 1x 2x L≤ l> 1 or 2 x ABB | 5/253 GAF185 ... GAF2050 contactors Technical data Connecting characteristics Contactor types Main terminals Flat type AC / DC operated GAF185 GAF300 GAF460 GAF750 GAF1250 GAF1650 GAF2050 80 10 40 17 40 50 27 15.5 8 AF2050 25 ø 13 80 40 5 6 25 6 22.5 ø 6.5 ø 10.2 ø 8.5 Connection capacity (min. ... max.) Main conductors (poles) Rigid with Single for Cu cable connector Single for Al/Cu cable Double for Al/Cu cable L≤ Bars or lugs ø L Connection capacity acc. to UL/CSA Tightening torque Recommended Max. Auxiliary conductors (coil terminals) Rigid solid Flexible with ferrule l L Lugs 6…185 mm² 25…150 mm² – 24 mm Ø > 8 mm 1 or 2 x 6 - 250 MCM 18 Nm / 160 Ib.in 20 Nm 1x 2x 1x 2x L≤ l> 1 or 2 x 16…240 mm² 120…240 mm² 2 x 95…120 mm² 32 mm 10 mm 4 - 500 MCM (1) 28 Nm / 247 lb.in 30 Nm 17 40 22.5 10 17.5 5 5 20 10 30 AF1250 27 ø 12.5 AF750 ø 10.5 ø 6.5 240 mm² 240 mm² 2 x 240 mm² 47 mm 10 mm 2//250 - 500 MCM 35 Nm / 310 Ib.in 40 Nm 300 mm² 300 mm² 3 x 185 mm² 52 mm 12 mm 3// 2/0 - 500 MCM 45 Nm / 398 lb.in 49 Nm M10 M12 ø 13 AF1650 – – – 100 mm 12 mm 1/0 - 750 MCM 45 Nm / 398 lb.in 49 Nm 1…4 mm² 1…4 mm² 0.75…2.5 mm² 0.75…2.5 mm² 8 mm 3.7 mm AWG 18…14 1.00 Nm / 9 lb.in 1.20 Nm Connection capacity acc. to UL/CSA Tightening torque Recommended Max. Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Main terminals IP00 Coil terminals IP20 Screw terminals Main terminals M8 M10 Screws and bolts Coil terminals (delivered in open position) M3.5 Screwdriver type Flat Ø 5.5 mm / Pozidriv 2 1SFC101179C0201 (1) With LW110 enlargement piece: see "Accessories". 5/254 | ABB GA75 ... GAF2050 contactors Terminal marking and positioning GA75 contactors - AC operated Standard devices without addition of auxiliary contacts A1 A2 A1 1L1 + A2 1L1 + NO 13X 1L1 + 1L1 + A1 NC 21X 13X 21X 14X 22X A1 NC 22X NO 14X 2T1 – 2T1 – A2 A2 GA75-10-00 A2 A2 2T1 – GA75-10-11 2T1 – GA75-10-00 GA75-10-11 5 GAE75 contactors - DC operated Standard devices without addition of auxiliary contacts A1 A2 A1 1L1 + A2 1L1 + 35X 35X NO 13X C D L 5 C D L 5 NC 21X NC 22X NO 14X 36X 35X 1L1 + 1L1 + 13X 21X 14X 22X A1 36X 2T1 – 2T1 – A3 A3 GAE75-10-00 35X A1 A2 36X GAE75-10-11 GAF185 ... GAF2050 contactors - A2 A3 GAE75-10-00 A3 36X 2T1 – 2T1 – GAE75-10-11 AC / DC operated + GAF2050-10 Ith=2050A Ui = 1000V DC Ie DC-1 = 2050A Ue = 1000V DC IEC 60947-4-1 1G1129 EN 60947-4-1 All 3 poles must be connected in series Device equipped with permmanent magnets 1L1 + 13X 21X 14X 22X A1 GAF185 ... GAF2050-10-11 A2 2T1 – GAF185 ... GAF2050-10-11 1SBC101985S0201 Connection bars are sold separately ABB | 5/255 GA75 1-pole contactor GAE75 1-pole contactor 75 mm EN/IEC 60715 11 0.43" 100 3.94" ø 6.2 0.24" M6 1/4-20 UNC 6.5 0.26" 90 3.54" 10 0.39" 72 2.83" 10 0.39" 5 0.2" 60 2.36" 5 0.2" 110 4.33" 82 3.23" 108 4.25" 72 2.83" 6 0.24" 10 0.39" 72 2.83" 10 0.39" 5 0.2" 60 2.36" 5 0.2" GAE75 1SBC101491S0201 GAE75-10-11 75 mm EN/IEC 60715 11 0.43" 11 0.43" 4 0.16" 12 0.47" ø 6.2 0.24" M6 1/4-20 UNC 6.5 0.26" 90 3.54" 35 mm x15 EN/IEC 60715 GA75 100 3.94" 11 0.43" 11 0.43" 11 0.43" 110 4.33" GAE75-10-00 6 0.24" GA75-10-11 GA75-10-00 82 3.23" 108 4.25" 72 2.83" 4 0.16" 11 0.43" 110 4.33" 110 4.33" 70 2.76" 12 0.47" 70 2.76" 5 35 mm x15 EN/IEC 60715 mm, inches 11 0.43" Main dimensions 5/256 | ABB GAF185, GAF300 3-pole contactor Main dimensions mm, inches 111.5 4.39" 105 4.13" ø 8.5 0.33" 160 6.3" 35.5 1.4" 5 0.2" 35 1.38" 165 6.5" 196 7.72" 187 7.36" 17.5 0.69" 10 0.39" 12 0.47" 5 M5 10-24 UNC 35 1.38" GAF185-30-11 12 0.47" GAF185-30-11 140 5.51" 180.5 7.11" ø 10.2 0.4" 35.5 1.4" 5 0.2" 43.75 1.72" 187 7.36" 227 8.94" 219 8.62" 14 0.55" 17.5 0.69" M5 10-24 UNC 43.75 1.72" GAF300-30-11 1SFC101180C0201 GAF300-30-11 ABB | 5/257 GAF460 3-pole contactor mm, inches 186 7.32" ø6.5 0.26" ø10.5 0.41" 268 10.55" 216 8.5" 48.5 1.91" 6 0.24" 63 2.48" GAF460-30-11 63 2.48" 248 9.76" M5 10-24 UNC 1SFC101181C0201 5 22.5 0.89" 278 10.94" 25 0.98" 11.5 0.45" Main dimensions 5/258 | ABB GAF750 3-pole contactor Main dimensions 210 8.27" 22.5 0.89" ø6.5 0.26" ø12.5 0.49" 242 9.53" 48.5 1.91" 6 0.24" 283 11.14" 273 10.75" 40 1.57" 11.5 0.45" mm, inches 5 72 2.83" GAF750-30-11 249 9.8" 72 2.83" 1SFC101182C0201 M6 1/4-20 UNC ABB | 5/259 GAF1250 3-pole contactor Main dimensions mm, inches 50 1.97" 27 72 2.83" ø 7 0.28" 242 9.53" 72 2.83" 210 8.27" 46.5 18.3" 8 0.31" 1SFC101125F0001 72 2.83" ø13 0.51" 1SFC101124F0001 249 9.8" 263 10.35" 313 12.32" GAF1250-30-11 72 2.83" 1SFC101183C0201 M6 1/4-20 UNC 1SFC101130F0001 249 9.8" 5 344 13.54" 1.06" 5/260 | ABB GAF1650, GAF2050 3-pole contactor Main dimensions mm, inches 40 1.57" 40 1.57" 27 27 ø 13.5 1.06" 0.53" 1.06" 40 ø 13.5 0.53" 1.57" 17 0.67" 13 0.51" 30 1.18" 13 0.51" 10 0.39" GAF1650 AF1350, AF1650 17 0.67" 17 0.67" 17 0.67" 30 1.18" 40 1.57" 10 0.39" 40 1.57" GAF2050 AF2050 AF1350, AF1650 136 5.35" 136 5.35" 40 1.57" AF2050 136 5.35" 136 5.35" 3 3 0.12" 0.12" 80 3.15" 104 4.09" 136 5.35" 438 17.24" ø9 80 0.35" 3.15" 104 4.09" 0.39" 136 5.35" 47 ø910 0.35" 1.85" 244 9.61" 312 12.28" 312 12.28" 392 15.43" 392 15.43" 5 47 1.85" 10 0.39" 244 9.61" 438 17.24" GAF1650, GAF2050-30-11 1SFC101184C0201 312 12.28" 136 5.35" M8 5/16-18 UMC ABB | 5/261 Summary_5-5 5 5/262 | ABB Contactors for capacitor switching Overview 5/264 UA16..RA up to UA110..RA - Unlimited peak Î Ordering details 5/266 Main accessories 5/269 Technical data 5/270 Terminal marking and positioning 5/272 Main dimensions 5/273 UA16 up to UA110 - Peak current Î ≤ 100 times the rms current Ordering details 5/276 Main accessories 5/281 5/282 Terminal marking and positioning 5/284 Main dimensions 5/285 Voltage code table 5/392 5 Summary_5-5 Technical data ABB | 5/263 Contactors for capacitor switching AC-6b utilization category according to IEC 60947-4-1 Capacitor transient conditions In Low Voltage industrial installations, capacitors are mainly used for reactive energy correction (raising the power factor). When these capacitors are energized, overcurrents of high amplitude and high frequencies (3 to 15 kHz) occur during the transient period (1 to 2 ms). The amplitude of these current peaks, also known as "inrush current peaks", depends on the following factors: –– The network inductances. –– The transformer power and short-circuit voltage. –– The type of power factor correction. There are 2 types of power factor correction: fixed or automatic. Fixed power factor correction consists of inserting, in parallel on the network, a capacitor bank whose total power is provided by the assembly of capacitors of identical or different ratings. The bank is energized by a contactor that simultaneously supplies all the capacitors (a single step). An electronic device automatically determines the power of the steps to be energized and activates the relevant contactors. The inrush current peak, in the case of automatic correction, depends on the power of the steps already on duty, and can reach 100 times the nominal current of the step to be energized. Single-step capacitor bank scheme Use the A/AF... contactor ranges. E1179D E1178D Multi-step capacitor bank scheme Use the UA... or UA..RA contactor ranges. Steady state condition data The presence of harmonics and the network's voltage tolerance lead to a current, estimated to be 1.3 times the nominal current In of the capacitor, permanently circulating in the circuit. Taking into account the manufacturing tolerances, the exact power of a capacitor can reach 1.15 times its nominal power. Standard IEC 60831-1 Edition 2002 specifies that the capacitor must therefore have a maximum thermal current IT of: IT = 1.3 x 1.15 x In = 1.5 x In Consequences for the contactors To avoid malfunctions (welding of main poles, abnormal temperature rise, etc.), contactors for capacitor bank switching must be sized to withstand: –– A permanent current that can reach 1.5 times the nominal current of the capacitor bank. –– The short but high peak current on pole closing (maximum permissible peak current Î ). Contactor selection tool for capacitor switching In a given application, if the user does not know the value of the inrush current peak, this value can be approximately calculated using the formulas given on the pages "Calculation and dimensioning". Alternatively by the CAPCAL selection tool, available on the ABB Website: www.abb.com/lowvoltage right hand side menu search: "Online product selection tools" select: "Contactors: AC-6b capacitor switching" This program allows the calculation of these peaks and gives the references of the ABB contactors according to the installation specifications. This calculation is valid for one or several capacitor banks. 5/264 | ABB 1SBC101603S0201 5 The inrush current peak, in the case of fixed correction, can reach 30 times the nominal current of the capacitor bank. An automatic power factor correction system, on the other hand, consists of several capacitor banks of identical or different ratings (several steps), energized separately according to the value of the power factor to be corrected. Contactors for capacitor switching The ABB solutions ABB offers 2 contactor versions according to the value of the inrush current peak and the power of the capacitor bank. UA..RA contactors for capacitor switching (UA16..RA to UA110..RA) with insertion of damping resistors 1SBC587764F0301 1SBC587774F0301 1SBC587794F0301 1SBC591444F0302 The insertion of damping resistors protects the contactor and the capacitor from the highest inrush currents. 5 UA contactors for capacitor switching (UA16 to UA110) 1SBC101604S0201 - Rev. A 1SBC580105F0303 1SBC580783F0303 1SBC580093F0303 1SBC591694F0303 Maximum permissible peak current Î ≤ 100 times the nominal rms current of the switched capacitor. ABB | 5/265 UA16..RA … UA30..RA 3-pole contactors for capacitor switching 12.5 to 30 kvar - Unlimited peak current Î AC operated Description UA..RA contactors for capacitor switching can be used for installations in which the peak current far exceeds 100 times nominal rms current. The contactors are delivered complete with their damping resistors and must be used without additional inductances. 1SBC587794F0301 The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. These contactors are of the block type design with: –– 3 main poles and 1 built-in auxiliary contact –– the UA..RA contactors are fitted with a special front-mounted block, which ensures the serial insertion of 3 damping resistors into the circuit to limit the current peak on energization of the capacitor bank -- their connection also ensures capacitor precharging in order to limit the second current peak occurring upon making of the main poles -- the insertion of resistors allows to damp the highest current peak of the capacitor when switching on, whatever its level. –– control circuit: AC operated –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. UA16-30-10RA 5 1SBC587774F0301 Ordering details IEC Rated operational power θ ≤ 40 °C 400 V AC-6b kvar 12.5 UL/CSA Rated operational power θ ≤ 40 °C 480 V Rated control circuit voltage Uc (1) kvar 16 22 22 30 28 V 50 Hz 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 UA30-30-10RA V 60 Hz 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 Auxiliary Type contacts fitted 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Order code Weight Pkg (1 pce) UA16-30-10RA UA16-30-10RA UA16-30-10RA UA16-30-10RA UA16-30-10RA UA16-30-10RA UA16-30-10RA UA26-30-10RA UA26-30-10RA UA26-30-10RA UA26-30-10RA UA26-30-10RA UA26-30-10RA UA26-30-10RA UA30-30-10RA UA30-30-10RA UA30-30-10RA UA30-30-10RA UA30-30-10RA UA30-30-10RA UA30-30-10RA kg 0.460 0.460 0.460 0.460 0.460 0.460 0.460 0.710 0.710 0.710 0.710 0.710 0.710 0.710 0.810 0.810 0.810 0.810 0.810 0.810 0.810 1SBL181024R8110 1SBL181024R8310 1SBL181024R8410 1SBL181024R8010 1SBL181024R8810 1SBL181024R8510 1SBL181024R8610 1SBL241024R8110 1SBL241024R8310 1SBL241024R8410 1SBL241024R8010 1SBL241024R8810 1SBL241024R8510 1SBL241024R8610 1SBL281024R8110 1SBL281024R8310 1SBL281024R8410 1SBL281024R8010 1SBL281024R8810 1SBL281024R8510 1SBL281024R8610 (1) Other control voltages see voltage code table. Main dimensions mm, inches 126.3 4.97" 141 5.55" 87.3 3.44" 107 4.21" 68 2.68" 102 4.02" 9 0.35" 9 0.35" UA16..RA 5/266 | ABB UA26..RA 54 2.13" UA30..RA +.394" 47 1.85" 130 +10 5.12" 35 mm EN/IEC 60715 90 3.54" 4.72" +.394" 47 1.85" 120 4 0.16" 4 0.16" 54 2.13" 1SBC101507S0201 4 0.16" 44 1.73" +10 35 mm EN/IEC 60715 90 3.54" 47 1.85" 120 +10 4.72" +.394" 74 2.91" 35 mm EN/IEC 60715 5.5 0.22" UA50..RA … UA75..RA 3-pole contactors for capacitor switching 40 to 60 kvar - Unlimited peak current Î AC operated Description These contactors are of the block type design with: –– 3 main poles –– the UA..RA contactors are fitted with a special front-mounted block, which ensures the serial insertion of 3 damping resistors into the circuit to limit the current peak on energization of the capacitor bank -- their connection also ensures capacitor precharging in order to limit the second current peak occurring upon making of the main poles -- the insertion of resistors allows to damp the highest current peak of the capacitor when switching on, whatever its level. –– control circuit: AC operated –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. 5 Ordering details IEC Rated operational power θ ≤ 40 °C 400 V AC-6b kvar 40 UL/CSA Rated operational power θ ≤ 40 °C 480 V Rated control circuit voltage Uc (1) kvar 50 50 55 60 64 V 50 Hz 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 Auxiliary Type contacts fitted V 60 Hz 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 UA50-30-00RA UA50-30-00RA UA50-30-00RA UA50-30-00RA UA50-30-00RA UA50-30-00RA UA50-30-00RA UA63-30-00RA UA63-30-00RA UA63-30-00RA UA63-30-00RA UA63-30-00RA UA63-30-00RA UA63-30-00RA UA75-30-00RA UA75-30-00RA UA75-30-00RA UA75-30-00RA UA75-30-00RA UA75-30-00RA UA75-30-00RA Order code Weight Pkg (1 pce) 1SBL351024R8100 1SBL351024R8300 1SBL351024R8400 1SBL351024R8000 1SBL351024R8800 1SBL351024R8500 1SBL351024R8600 1SBL371024R8100 1SBL371024R8300 1SBL371024R8400 1SBL371024R8000 1SBL371024R8800 1SBL371024R8500 1SBL371024R8600 1SBL411024R8100 1SBL411024R8300 1SBL411024R8400 1SBL411024R8000 1SBL411024R8800 1SBL411024R8500 1SBL411024R8600 kg 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 1.350 (1) Other control voltages see voltage code table. Main dimensions mm, inches 101.5 4" +10 1SBC101508S0201 150 75 mm EN/IEC 60715 4 0.16" 5.91" +10" 10 0.39" 47 1.85" 35 mm x 15 EN/IEC 60715 140.4 5.53" 114 4.49" UA75-30-00 RA The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. 110 4.33" 1SBC587764F0301 UA..RA contactors for capacitor switching can be used for installations in which the peak current far exceeds 100 times nominal rms current. The contactors are delivered complete with their damping resistors and must be used without additional inductances. 6 0.24" 70 2.76" UA50..RA, UA63..RA, UA75..RA ABB | 5/267 UA95..RA … UA110..RA 3-pole contactors for capacitor switching 70 to 80 kvar - Unlimited peak current Î AC operated Description 1SBC591444F0302 UA..RA contactors for capacitor switching can be used for installations in which the peak current far exceeds 100 times nominal rms current. The contactors are delivered complete with their damping resistors and must be used without additional inductances. UA110-30-00 RA 5 The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. These contactors are of the block type design with: –– 3 main poles –– the UA..RA contactors are fitted with a special front-mounted block, which ensures the serial insertion of 3 damping resistors into the circuit to limit the current peak on energization of the capacitor bank -- their connection also ensures capacitor precharging in order to limit the second current peak occurring upon making of the main poles -- the insertion of resistors allows to damp the highest current peak of the capacitor when switching on, whatever its level. –– control circuit: AC operated –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details IEC Rated operational power θ ≤ 40 °C 400 V AC-6b 70 UL/CSA Rated operational power θ ≤ 40 °C 480 V 80 95 80 Rated control circuit voltage Uc (1) V 50 Hz 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 Auxiliary Type contacts fitted V 60 Hz 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 UA95-30-00RA UA95-30-00RA UA95-30-00RA UA95-30-00RA UA95-30-00RA UA95-30-00RA UA95-30-00RA UA110-30-00RA UA110-30-00RA UA110-30-00RA UA110-30-00RA UA110-30-00RA UA110-30-00RA UA110-30-00RA Order code Weight Pkg (1 pce) 1SFL431024R8100 1SFL431024R8300 1SFL431024R8400 1SFL431024R8000 1SFL431024R8800 1SFL431024R8500 1SFL431024R8600 1SFL451024R8100 1SFL451024R8300 1SFL451024R8400 1SFL451024R8000 1SFL451024R8800 1SFL451024R8500 1SFL451024R8600 kg 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 (1) Other control voltages see voltage code table. Main dimensions mm, inches 155.6 6.13" 10 0.39" 90 3.54" UA95..RA, UA100..RA 5/268 | ABB 1SBC101553S0201 47 1.85" 75 mm EN/IEC 60715 148 5.83" 155.3 6.11" 6 0.24" 170 +10 6.69" +10" 114.4 4.5" UA..RA 3-pole contactors for capacitor switching Unlimited peak current Î Main accessory fitting details Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Main poles Available Front-mounted accessories auxiliary Auxiliary contact blocks contacts UA16-30-10RA UA26-30-10RA UA30-30-10RA UA50-30-00RA UA63-30-00RA UA75-30-00RA UA95-30-00RA UA110-30-00RA 3 3 3 3 3 3 3 3 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Side-mounted accessories Auxiliary contact blocks 1-pole CA5-.. 2-pole CAL... – 1 x CA5-... 1 to 2 x CA5-... + + 1 1 1 1 1 to 2 x CA5-... + 1 to 2 x CAL18-11 – x CAL5-11 to 2 x CAL5-11 to 2 x CAL5-11 to 2 x CAL5-11 5 1SBC101509S0201 Contactor types ABB | 5/269 UA16..RA … UA110..RA 3-pole contactors for capacitor switching Unlimited peak current Î Technical data Main pole - Utilization characteristics according to IEC Contactor types Standards Rated operational voltage Ue max. Rated frequency (without derating) AC-6b Utilization category Rated operational power AC-6b For air temperature close θ ≤ 40 °C to contactor AC operated 230-240 V 400-415 V 440 V 500-550 V 690 V 230-240 V 400-415 V 440 V 500-550 V 690 V 230-240 V 400-415 V 440 V 500-550 V 690 V θ ≤ 55 °C Multi-step capacitor bank scheme θ ≤ 70 °C Max. permissible peak current Î Short-circuit protection device for contactors UA75..RA UA95..RA UA110..RA 8 kvar 12.5 kvar 15 kvar 18 kvar 22 kvar 7.5 kvar 12.5 kvar 13 kvar 16 kvar 21 kvar 6 kvar 10 kvar 11 kvar 12.5 kvar 17 kvar Unlimited 35 kvar 60 kvar 65 kvar 75 kvar 100 kvar 30 kvar 50 kvar 53 kvar 65 kvar 80 kvar 25 kvar 41 kvar 45 kvar 55 kvar 70 kvar 40 kvar 70 kvar 75 kvar 85 kvar 120 kvar 35 kvar 60 kvar 65 kvar 75 kvar 105 kvar 30 kvar 53 kvar 58 kvar 70 kvar 85 kvar 45 kvar 80 kvar 85 kvar 95 kvar 130 kvar 40 kvar 70 kvar 75 kvar 82 kvar 110 kvar 35 kvar 60 kvar 70 kvar 78 kvar 100 kvar 12.5 kvar 22 kvar 24 kvar 30 kvar 35 kvar 11.5 kvar 20 kvar 20 kvar 25 kvar 31 kvar 9 kvar 15.5 kvar 17 kvar 20 kvar 26 kvar 16 kvar 30 kvar 32 kvar 34 kvar 45 kvar 16 kvar 27.5 kvar 30 kvar 34 kvar 45 kvar 11 kvar 19.5 kvar 20.5 kvar 25 kvar 32 kvar 25 40 50 55 72 24 40 43 50 65 20 35 37 46 60 kvar kvar kvar kvar kvar kvar kvar kvar kvar kvar kvar kvar kvar kvar kvar 30 kvar 50 kvar 55 kvar 65 kvar 80 kvar 27 kvar 45 kvar 48 kvar 60 kvar 75 kvar 23 kvar 39 kvar 42.5 kvar 50 kvar 65 kvar 80 A 125 A 200 A 240 cycles/h Ue ≤ 440 V 250 000 operating cycles 500 V ≤ Ue ≤ 690 V 100 000 operating cycles gG type fuse (1) Max. electrical switching frequency Electrical durability AC-6b 250 A (1) The fuse ratings given represent the maximum ratings ensuring type 1 coordination according to the definition of standard IEC 60947-4-1. Main pole - Utilization characteristics according to UL / CSA Contactor types Power - 60 Hz For air temperature close to contactor AC operated UA16..RA UA26..RA UA30..RA UA50..RA UA63..RA UA75..RA UA95..RA UA110..RA 240 V 480 V 600 V 8 kvar 16 kvar 20 kvar Unlimited 11 kvar 22 kvar 27 kvar 14 kvar 28 kvar 35 kvar 25 kvar 50 kvar 62 kvar 27.5 kvar 55 kvar 70 kvar 32 kvar 64 kvar 80 kvar 40 kvar 80 kvar 100 kvar 45 kvar 95 kvar 120 kvar θ ≤ 40 °C Max. permissible peak Current Î Operating principle The front-mounted block mechanism of the UA..RA contactors ensures: –– early making of the auxiliary "PA" poles with respect to the main "PP" poles –– automatic return to the open position of the auxiliary "PA" poles after the main poles are closed. When the coil is energized, the early making auxiliary poles connect the capacitor to the network via the set of 3 resistors. The damping resistors attenuate the first current peak and the second inrush current when the main contacts begin to make. Once the main poles are in the closed position, the auxiliary poles automatically break. When the coil is de-energized, the main poles break ensuring the breaking of the capacitor bank. The contactor can then begin a new cycle. Coil voltage Uc R A1 PP A2 PA R C Aux. poles PA Main poles PP Total closing time The insertion of resistors allows to damp the highest current peak of the capacitor when switching on, whatever its level. 5/270 | ABB 1SBC101510S0201 5 UA16..RA UA26..RA UA30..RA UA50..RA UA63..RA IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 690 V 50 / 60 Hz UA16..RA … UA110..RA 3-pole contactors for capacitor switching Unlimited peak current Î Technical data Connecting characteristics Contactor types Connection capacity (min. ... max.) Main conductors (poles) Rigid Solid (≤ 4 mm²) Stranded (≥ 6 mm²) Flexible with ferrule l L Bars or lugs Connection capacity acc. to UL/CSA Tightening torque Recommended Max. Auxiliary conductors (built-in auxiliary terminals + coil terminals) Rigid solid Flexible with ferrule l L UA16..RA UA26..RA UA30..RA UA50..RA UA63..RA UA75..RA UA95..RA UA110..RA 1x 2x 1x 2x L≤ l> 1 or 2 x 1...4 mm² 0.75...2.5 mm² 7.7 mm 3.7 mm AWG 18...10 1 Nm / 9 Ib.in 1.2 Nm 1.5...6 mm² 1.5...4 mm² 10 mm 4.2 mm AWG 12...8 1.7 Nm / 15 Ib.in 2.2 Nm 2.5...16 mm² 2.5...16 + 2.5...6 mm² 2.5...10 mm² 2.5...10 + 2.5...4 mm² AWG 8...4 2.3 Nm / 20 Ib.in 2.6 Nm 6...50 mm² 6…25 + 6…16 mm² 6...35 mm² 6...16 + 6...10 mm² AWG 8...1 4 Nm / 35 Ib.in 4.5 Nm 10...95 mm² 6...35 mm² 10...70 mm² 6...35 mm² AWG 6...2/0 8 Nm / 53 Ib.in 9 Nm 1x 2x 1x 2x L≤ l> L≤ l> 1 or 2 x 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 8 mm 3.7 mm 7.7 mm 3.7 mm AWG 18...14 1…2.5 mm² 0.75…2.5 mm² 0.75…2.5 mm² 0.75…2.5 mm² - - AC operated Lugs Coil terminals Built-in auxiliary terminals Connection capacity acc. to UL/CSA Tightening torque Coil terminals Recommended Max. Built-in auxiliary terminals Recommended Max. Degree of protection 10 mm 4.2 mm 8 mm 3.7 mm 5 1 Nm / 9 Ib.in 1.2 Nm 1 Nm / 9 Ib.in 1.2 Nm acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Main terminals Coil terminals Built-in auxiliary terminals Screw terminals Main terminals Coil terminals IP20 IP10 IP20 IP20 Delivered in open position, screws of unused terminals must be tightened M 3.5 M4 M5 M6 Screwdriver type Flat Ø 5.5 / Pozidriv 2 Flat Ø 6.5 / Pozidriv 2 M 3.5 Flat Ø 5.5 / Pozidriv 2 M 3.5 M4 Screwdriver type Flat Ø 5.5 / Pozidriv 2 M8 Hexagon socket (s = 4 mm) Screwdriver type Built-in auxiliary terminals M 3.5 - - 1SBC101513S0201 Other technical characteristics are the same as those of standard A contactors. ABB | 5/271 UA..RA contactors Terminal marking and positioning UA..RA contactors - AC operated Standard devices without addition of auxiliary contacts A2 A1 A1 1L1 3L2 5L3 13 27 37 NO 47 27 37 NO 47 5- NO NO NO NO NO NO 28 38 48 NO 28 38 48 5NO 2T1 4T2 6T3 14 A2 1- A1 3L2 27 37 47 NO NO 28 38 48 14 A2 27 37 47 NO NO NO 28 38 48 2T1 4T2 6T3 14 UA30-30-10 RA 2T1 4T2 6T3 UA16 ... 30-30-10 RA 1L1 3L2 5L3 5L3 NO 13 NO A2 A1 1L1 1L1 3L2 5L3 A2 UA16-30-10 RA UA26-30-10 RA 5- A1 27 37 47 NO NO NO 1- 2T1 4T2 5- 28 38 48 A2 6T3 A2 UA50 ... 110-30-00 RA 2T1 4T2 6T3 UA50 ... 110-30-00 RA 1SBC101574S0201 5 A2 1L1 3L2 5L3 13 5/272 | ABB UA..RA 3-pole contactors for capacitor switching Unlimited peak current Î Main dimensions mm, inches 107 4.21" 68 2.68" ø 4.5 0.18" M4 8-32 UNC 60 2.36" 50 1.97" 47 1.85" 120 +10 4.72" +.394" 35 1.38" 35 mm EN/IEC 60715 74 2.91" 5.5 0.22" 4 0.16" 44 1.73" 4.5 0.18" 4.5 0.18" UA16..RA 5 126.3 4.97" 87.3 3.44" 45 1.77" ø 4.2 0.17" M4 8-32 UNC 4 0.16" 80 3.15" 120 54 2.13" 70 2.76" 4.72" +.394" 47 1.85" +10 35 mm EN/IEC 60715 90 3.54" 9 0.35" 4.5 0.18" 4.5 0.18" UA26..RA 141 5.55" 102 4.02" ø 4.2 0.17" M4 8-32 UNC 80 3.15" 4 0.16" 54 2.13" 70 2.76" 47 1.85" 130 +10 5.12" +.394" 45 1.77" 35 mm EN/IEC 60715 90 3.54" 9 0.35" 4.5 0.18" 4.5 0.18" UA30..RA 10 0.39" 5 0.2" 60 2.36" 1SBC101575S0201 100 3.94" 150 6 0.24" 90 3.54" 5.91" +10" +10 75 mm EN/IEC 60715 4 0.16" 70 2.76" ø 6.2 0.24" M6 1/4-20 UNC 47 1.85" 35 mm x 15 EN/IEC 60715 114 4.49" 110 4.33" 140.4 5.53" 101.5 4" 5 0.2" UA50..RA, UA63..RA, UA75..RA ABB | 5/273 UA..RA 3-pole contactors for capacitor switching Unlimited peak current Î Main dimensions mm, inches 155.6 6.13" 90 3.54" 136 5.35" 126 4.96" 170 +10 6.69" +10" 47 1.85" 10 0.39" ø 6.2 0.24" M6 1/4-20 UNC 6 0.24" 6 0.24" UA95..RA, UA110..RA 1SBC101575S0201 5 78 3.07" 6 0.24" 75 mm EN/IEC 60715 148 5.83" 155.3 6.11" 114.4 4.5" 5/274 | ABB Notes N7 5 ABB | 5/275 UA16 … UA30 3-pole contactors for capacitor switching 12.5 to 27.5 kvar - peak current Î ≤ 100 times the rms current AC operated Description UA contactors can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. 1SBC591694F0304 The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. These contactors are of the block type design with: –– 3 main poles and 1 built-in auxiliary contact –– control circuit: AC operated –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. UA16-30-10 Ordering details 1SBC580093F0303 5 IEC Rated operational power θ ≤ 40 °C 400 V AC-6b kvar 12.5 UL/CSA Rated operational power θ ≤ 40 °C 480 V Rated control circuit voltage Uc (1) Î kA 1.8 kvar - 20 3 25 27.5 3.5 32 V 50 Hz 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 Max peak current UA30-30-10 V 60 Hz 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 Auxiliary Type contacts fitted 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Order code Weight Pkg (1 pce) UA16-30-10 UA16-30-10 UA16-30-10 UA16-30-10 UA16-30-10 UA16-30-10 UA16-30-10 UA26-30-10 UA26-30-10 UA26-30-10 UA26-30-10 UA26-30-10 UA26-30-10 UA26-30-10 UA30-30-10 UA30-30-10 UA30-30-10 UA30-30-10 UA30-30-10 UA30-30-10 UA30-30-10 1SBL181022R8110 1SBL181022R8310 1SBL181022R8410 1SBL181022R8010 1SBL181022R8810 1SBL181022R8510 1SBL181022R8610 1SBL241022R8110 1SBL241022R8310 1SBL241022R8410 1SBL241022R8010 1SBL241022R8810 1SBL241022R8510 1SBL241022R8610 1SBL281022R8110 1SBL281022R8310 1SBL281022R8410 1SBL281022R8010 1SBL281022R8810 1SBL281022R8510 1SBL281022R8610 kg 0.340 0.340 0.340 0.340 0.340 0.340 0.340 0.600 0.600 0.600 0.600 0.600 0.600 0.600 0.710 0.710 0.710 0.710 0.710 0.710 0.710 (1) Other control voltages see voltage code table. Main dimensions mm, inches 93.6 3.69" 74 2.91" 9 0.35" 68 2.68" 6.3 0.25" 44 1.73" 35 mm EN/IEC 60715 90 3.54" 74 2.91" 35 mm EN/IEC 60715 5.5 0.22" 4 0.16" 10 0.39" 54 2.13" UA16 4 0.16" 10 0.39" UA26 108.3 4.26" UA30 4 0.16" 10 0.39" 1SBC101514S0201 90 3.54" 54 2.13" 5/276 | ABB 6.3 0.25" 35 mm EN/IEC 60715 9 0.35" UA50 … UA75 3-pole contactors for capacitor switching 33 to 50 kvar - peak current Î ≤ 100 times the rms current AC operated Description These contactors are of the block type design with: –– 3 main poles –– control circuit: AC operated –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. Ordering details IEC Rated operational power θ ≤ 40 °C 400 V AC-6b kvar 33 UL/CSA Rated operational power θ ≤ 40 °C 480 V Rated control circuit voltage Uc (1) Î kA 5 kvar 40 45 6.5 - 50 7.5 55 V 50 Hz 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 Max peak current V 60 Hz 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 Auxiliary Type contacts fitted 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 UA50-30-00 UA50-30-00 UA50-30-00 UA50-30-00 UA50-30-00 UA50-30-00 UA50-30-00 UA63-30-00 UA63-30-00 UA63-30-00 UA63-30-00 UA63-30-00 UA63-30-00 UA63-30-00 UA75-30-00 UA75-30-00 UA75-30-00 UA75-30-00 UA75-30-00 UA75-30-00 UA75-30-00 Order code Weight Pkg (1 pce) 1SBL351022R8100 1SBL351022R8300 1SBL351022R8400 1SBL351022R8000 1SBL351022R8800 1SBL351022R8500 1SBL351022R8600 1SBL371022R8100 1SBL371022R8300 1SBL371022R8400 1SBL371022R8000 1SBL371022R8800 1SBL371022R8500 1SBL371022R8600 1SBL411022R8100 1SBL411022R8300 1SBL411022R8400 1SBL411022R8000 1SBL411022R8800 1SBL411022R8500 1SBL411022R8600 5 kg 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 1.160 (1) Other control voltages see voltage code table. mm, inches 35 mm x15 EN/IEC 60715 Main dimensions 108 4.25" 6 0.24" 6.5 0.26" 70 2.76" 10 0.39" 1SBC101521S0201 4 0.16" 75 mm EN/IEC 60715 UA50-30-00 The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. 110 4.33" 1SBC580783F0303 UA contactors can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. 10 0.39" UA50, UA63, UA75 ABB | 5/277 UA50 … UA75 3-pole contactors for capacitor switching 33 to 50 kvar - Peak current Î < 100 Times the rms current AC operated - with 1 N.O. + 1 N.C. auxiliary contacts Description UA contactors can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms current. 1SBC101381F0014 The capacitors must be discharged (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. UA50-30-11 These contactors are of the block type design with: –– 3 main poles –– control circuit: AC operated –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. Ordering details IEC Rated operational power θ ≤ 40 °C 400 V AC-6b kvar 33 5 UL/CSA Rated operational power θ ≤ 40 °C 400 V Rated control circuit voltage Uc (1) Î kA 5 kvar 40 45 6.5 - 50 7.5 55 V 50 Hz 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 Max peak current Auxiliary Type contacts fitted V 60 Hz 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 UA50-30-11 UA50-30-11 UA50-30-11 UA50-30-11 UA50-30-11 UA50-30-11 UA50-30-11 UA63-30-11 UA63-30-11 UA63-30-11 UA63-30-11 UA63-30-11 UA63-30-11 UA63-30-11 UA75-30-11 UA75-30-11 UA75-30-11 UA75-30-11 UA75-30-11 UA75-30-11 UA75-30-11 Order code Weight Pkg (1 pce) 1SBL351022R8111 1SBL351022R8311 1SBL351022R8411 1SBL351022R8011 1SBL351022R8811 1SBL351022R8511 1SBL351022R8611 1SBL371022R8111 1SBL371022R8311 1SBL371022R8411 1SBL371022R8011 1SBL371022R8811 1SBL371022R8511 1SBL371022R8611 1SBL411022R8111 1SBL411022R8311 1SBL411022R8411 1SBL411022R8011 1SBL411022R8811 1SBL411022R8511 1SBL411022R8611 kg 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 1.200 (1) Other control voltages see voltage code table. 35 mm x15 EN/IEC 60715 6.5 0.26" 10 0.39" 10 0.39" UA50, UA63, UA75 with 1 N.O. + 1 N.C. auxiliary contacts 5/278 | ABB 1SBC101529S0201 70 2.76" 108 4.25" 6 0.24" 4 0.16" 75 mm EN/IEC 60715 74 2.91" 12 0.47" mm, inches 110 4.33" Main dimensions UA95 ... UA110 3-pole contactors for capacitor switching 65 to 75 kvar - peak current Î ≤ 100 times the rms current AC operated Description Ordering details IEC Rated operational power θ ≤ 40 °C 400 V AC-6b kvar 65 75 UL/CSA Rated operational power θ ≤ 40 °C 480 V Rated control circuit voltage Uc (1) Î kA 9.3 kvar 70 10.5 80 V 50 Hz 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 Max peak current V 60 Hz 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 Auxiliary Type contacts fitted 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 UA95-30-00 UA95-30-00 UA95-30-00 UA95-30-00 UA95-30-00 UA95-30-00 UA95-30-00 UA110-30-00 UA110-30-00 UA110-30-00 UA110-30-00 UA110-30-00 UA110-30-00 UA110-30-00 Order code Weight Pkg (1 pce) 1SFL431022R8100 1SFL431022R8300 1SFL431022R8400 1SFL431022R8000 1SFL431022R8800 1SFL431022R8500 1SFL431022R8600 1SFL451022R8100 1SFL451022R8300 1SFL451022R8400 1SFL451022R8000 1SFL451022R8800 1SFL451022R8500 1SFL451022R8600 5 kg 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 2.000 (1) Other control voltages see voltage code table. Main dimensions mm, inches 123.5 4.86" 6.5 0.26" 6 0.24" 1SFC101059C0201 20 0.79" 10 0.39" E0784D1 90 3.54" E0783D UA110-30-00 These contactors are of the block type design with: –– 3 main poles –– control circuit: AC operated –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. 148 5.83" 1SBC580105F0303 UA contactors can be used for the switching of capacitor banks whose inrush current peaks are less or equal to 100 times nominal rms current. The capacitors must be discharges (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. UA95, UA110 ABB | 5/279 UA95 ... UA110 3-pole contactors for capacitor switching 65 to 75 kvar - peak current Î < 100 times the rms current AC operated with 1 N.O. + 1 N.C. auxiliary contacts 1SBC580105F0303 Description UA110-30-11 UA contactors can be used for the switching of capacitor banks whose inrush current peaks are less or equal to 100 times nominal rms current. The capacitors must be discharges (maximum residual voltage at terminals ≤ 50 V) before being re-energized when the contactors are making. These contactors are of the block type design with: - 3 main poles - control circuit: AC operated - add-on auxiliary contact blocks for front or side mounting and a wide range of accessories Ordering details IEC Rated operational power AC-6b θ ≤ 40 °C 400 V kvar 65 5 75 Max peak current UL/CSA Rated operational power Î kA 9.3 40 °C 400 V kvar 70 10.5 80 Rated control circuit voltage Uc (1) V 50 Hz 24 48 110 220…230 230…240 380…400 400…415 24 48 110 220…230 230…240 380…400 400…415 Auxiliary Type contacts fitted V 60 Hz 24 48 110…120 230…240 240…260 400…415 415…440 24 48 110…120 230…240 240…260 400…415 415…440 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 UA95-30-11 UA95-30-11 UA95-30-11 UA95-30-11 UA95-30-11 UA95-30-11 UA95-30-11 UA110-30-11 UA110-30-11 UA110-30-11 UA110-30-11 UA110-30-11 UA110-30-11 UA110-30-11 Order code Weight Pkg (1 pce) 1SFL431022R8111 1SFL431022R8311 1SFL431022R8411 1SFL431022R8011 1SFL431022R8811 1SFL431022R8511 1SFL431022R8611 1SFL451022R8111 1SFL451022R8311 1SFL451022R8411 1SFL451022R8011 1SFL451022R8811 1SFL451022R8511 1SFL451022R8611 kg 2.040 2.040 2.040 2.040 2.040 2.040 2.040 2.040 2.040 2.040 2.040 2.040 2.040 2.040 (1) Other control voltages see voltage code table. Main dimensions mm, inches 123.5 4.86" 6.5 0.26" 5/280 | ABB 20 0.79" E0788D1 10 0.39" 1SFC101060C0201 UA95, UA110 148 5.83" 90 3.54" E0787D 74 2.91" 12 0.47" 6 0.24" UA... 3-pole contactors for capacitor switching Peak current Î ≤ 100 times the rms current Main accessory fitting details Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor types Main poles Available Front-mounted accessories auxiliary Auxiliary contact blocks contacts UA16-30-10 UA26-30-10 UA30-30-10 3 0 3 0 3 0 1 0 1 0 1 0 1 to 4 x CA5-.. 1 to 4 x CA5-.. 1 to 5 x CA5-.. or 1 x CA5-.. (4-pole) or 1 x CA5-.. (4-pole) or 1 x CA5-.. (4-pole) UA50-30-00 UA63-30-00 UA75-30-00 UA95-30-00 UA110-30-00 3 3 3 3 3 0 0 0 0 0 1 to 6 x CA5-.. or 1 x CA5-.. (4-pole) 4-pole CA5-.. + 1 x 1-pole CA5-.. 0 0 0 0 0 0 0 0 0 0 + 2 x 1-pole CA5-.. 1 to 6 x CA5-.. or 1 x CA5-.. (4-pole) TP.. A or 1 x TP.. A or 1 x TP.. A or 1 x TP.. A 2-pole CAL... + + + 1 to 2 x CAL5-11 1 to 2 x CAL5-11 1 to 2 x CAL5-11 + 1 to 2 x CAL5-11 + 1 to 2 x CAL18-11 + 1 x CA5-.. (1-pole) or 1 x TP.. A + 2 x CA5-.. (1-pole) – 5 + 2 x 1-pole CA5-.. 1SBC101533S0201 1-pole CA5-.. Side-mounted accessories Auxiliary contact blocks Pneumatic timer ABB | 5/281 UA16 … UA110 3-pole contactors for capacitor switching Peak current Î ≤ 100 times the rms current Technical data Main pole - Utilization characteristics according to IEC Contactor types Standards Rated operational voltage Ue max. Rated frequency (without derating) AC-6b Utilization category Rated operational power AC-6b (1) For air temperature close θ ≤ 40 °C to contactor θ ≤ 55 °C Multi-step capacitor bank scheme θ ≤ 70 °C Max. permissible peak current Î 230-240 V 400-415 V 440 V 500-550 V 690 V 230-240 V 400-415 V 440 V 500-550 V 690 V 230-240 V 400-415 V 440 V 500-550 V 690 V Ue ≤ 500 V Ue > 500 V UA16 UA26 UA30 UA50 UA63 IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 690 V 50 / 60 Hz UA75 UA95 UA110 7.5 kvar 12.5 kvar 13.7 kvar 15.5 kvar 21.5 kvar 6.7 kvar 11.7 kvar 13 kvar 14.7 kvar 20 kvar 6 kvar 10 kvar 11 kvar 12.5 kvar 17 kvar 1.8 kA 1.6 kA 30 kvar 50 kvar 55 kvar 62 kvar 75 kvar 30 kvar 50 kvar 53 kvar 62 kvar 75 kvar 22 kvar 39 kvar 43 kvar 47.5 kvar 65 kvar 7.5 kA 6.75 kA 35 kvar 65 kvar 65 kvar 70 kvar 80 kvar 35 kvar 65 kvar 65 kvar 70 kvar 80 kvar 30 kvar 55 kvar 55 kvar 60 kvar 70 kvar 9.3 kA 8 kA 40 kvar 75 kvar 75 kvar 80 kvar 90 kvar 40 kvar 70 kvar 75 kvar 80 kvar 90 kvar 35 kvar 65 kvar 70 kvar 75 kvar 85 kvar 10.5 kA 9 kA 12 kvar 20 kvar 22 kvar 22 kvar 30 kvar 11 kvar 18.5 kvar 20 kvar 22 kvar 30 kvar 8.5 kvar 14.5 kvar 16 kvar 19.5 kvar 25 kvar 3 kA 2.7 kA 16 kvar 27.5 kvar 30 kvar 34 kvar 45 kvar 16 kvar 27.5 kvar 30 kvar 34 kvar 45 kvar 11 kvar 19 kvar 20 kvar 23.5 kvar 32 kvar 3.5 kA 3.1 kA 20 kvar 33 kvar 36 kvar 40 kvar 55 kvar 20 kvar 33 kvar 36 kvar 40 kvar 55 kvar 19 kvar 32 kvar 35 kvar 40 kvar 52 kvar 5 kA 4.5 kA 25 kvar 45 kvar 50 kvar 50 kvar 70 kvar 25 kvar 43 kvar 48 kvar 50 kvar 70 kvar 21 kvar 37 kvar 41 kvar 45 kvar 60 kvar 6.5 kA 5.8 kA Short-circuit protection device for contactors gG type fuse Max. electrical switching frequency Electrical durability AC-6b sized 1.5…1.8 In of the capacitor 240 cycles/h Ue ≤ 690 V 100 000 operating cycles (1) For 220 V and 380 V, multiply by 0.9 the rated values at 230 V and 400 V respectively. Example: 50 kvar / 400 V corresponding to 0.9 x 50 = 45 kvar/380 V. If, in an application, the current peak is greater than the maximum peak current Î specified in the tables above, select a higher rating, refer to the UA..RA contactors, or add inductances. (see application guide "Contactors for capacitor switching"). Main pole - Utilization characteristics according to UL / CSA Contactor types Power - 60 Hz For air temperature close to contactor AC operated θ ≤ 40 °C 240 V 480 V 600 V UA16 UA26 UA30 UA50 UA63 UA75 UA95 UA110 - 12.5 kvar 25 kvar 30 kvar 16 kvar 32 kvar 40 kvar 20 kvar 40 kvar 50 kvar - 27.5 kvar 55 kvar 70 kvar 35 kvar 70 kvar 75 kvar 40 kvar 80 kvar 85 kvar If, in an application, the current peak is greater than the maximum peak current Î specified in the tables above, select a higher rating, refer to the UA..RA contactors, or add inductances. (see application guide "Contactors for capacitor switching"). 1SBC101536S0201 5 AC operated 5/282 | ABB UA16 … UA110 3-pole contactors for capacitor switching Peak current Î ≤ 100 times the rms current Technical data Connecting characteristics Contactor types Connection capacity (min. ... max.) Main conductors (poles) Rigid Solid (≤ 4 mm²) Stranded (≥ 6 mm²) Flexible with ferrule l L Bars or lugs Connection capacity acc. to UL/CSA Tightening torque Recommended Max. Auxiliary conductors (built-in auxiliary terminals + coil terminals) Rigid solid Flexible with ferrule l L UA16 UA26 UA30 UA50 UA63 UA75 UA95 UA110 1x 2x 1x 2x L≤ l> 1 or 2 x 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 7.7 mm 3.7 mm AWG 18...10 1 Nm / 9 Ib.in 1.2 Nm 1.5...6 mm² 1.5...6 mm² 0.75...4 mm² 0.75...4 mm² 10 mm 4.2 mm AWG 12...8 1.7 Nm / 15 Ib.in 2.2 Nm 2.5...16 mm² 2.5...16 mm² 2.5...10 mm² 2.5...10 mm² AWG 8...4 2.3 Nm / 20 Ib.in 2.6 Nm 6...50 mm² 6...25 mm² 6...35 mm² 6...16 mm² AWG 8...1 4 Nm / 35 Ib.in 4.5 Nm 10...95 mm² 6...35 mm² 10...70 mm² 6...35 mm² AWG 6...2/0 8 Nm / 71 Ib.in 9 Nm 1x 2x 1x 2x L≤ l> L≤ l> 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 8 mm 3.7 mm 7.7 mm 3.7 mm AWG 18...14 1…2.5 mm² 0.75…2.5 mm² 0.75…2.5 mm² 0.75…2.5 mm² - - AC operated Lugs Coil terminals Built-in auxiliary terminals Connection capacity acc. to UL/CSA Tightening torque Coil terminals Recommended Max. Built-in auxiliary terminals Recommended Max. Degree of protection 10 mm 4.2 mm 8 mm 3.7 mm 5 1 Nm / 9 Ib.in 1.2 Nm 1 Nm / 9 Ib.in 1.2 Nm acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Main terminals Coil terminals Built-in auxiliary terminals Screw terminals Main terminals Coil terminals IP20 IP10 IP20 IP20 Delivered in open position, screws of unused terminals must be tightened M3.5 M4 M5 M6 Screwdriver type Flat Ø 5.5 / Pozidriv 2 Flat Ø 6.5 / Pozidriv 2 M3.5 Flat Ø 5.5 / Pozidriv 2 M3.5 M4 Screwdriver type Flat Ø 5.5 / Pozidriv 2 M8 Hexagon socket (s = 4 mm) Screwdriver type Built-in auxiliary terminals M3.5 - - 1SBC101537S0201 Other technical characteristics are the same as those of standard A contactors. ABB | 5/283 UA... contactors Terminal marking and positioning UA... contactors - AC operated Standard devices without addition of auxiliary contacts A2 A1 1L1 3L2 5L3 13 NO A1 1L1 3L2 5L3 A2 2T1 4T2 6T3 13 NO NO 2T1 4T2 6T3 14 A2 UA16 ... UA30-30-10 UA16 ... UA30-30-10 A2 A1 3L2 1L1 NO 14 5L3 5 2T1 4T2 A1 1L1 3L2 5L3 A2 2T1 4T2 6T3 6T3 A2 UA50 ... UA110-30-00 UA50 ... UA110-30-00 Standard devices with factory mounted auxiliary contacts A1 1L1 3L2 A2 5L3 NO 13X NC 21X NC 22X A1 1L1 3L2 5L3 A2 2T1 4T2 6T3 NO 14X 2T1 4T2 6T3 A2 21X NC NO 14X NC 22X UA50 ... UA110-30-11 1SBC101571S0201 UA50 ... UA110-30-11 13X NO 5/284 | ABB UA.. 3-pole contactors for capacitor switching Main dimensions mm, inches 74 2.91" 68 2.68" 50 1.97" 35 mm EN/IEC 60715 74 2.91" 44 1.73" 4 0.16" ø 4.5 0.18" M4 8-32 UNC 60 2.36" 35 1.38" 5.5 0.22" 4.5 0.18" 4.5 0.18" 10 0.39" UA16 UA16 drilling plan 5 108.3 4.26" 35 mm EN/IEC 60715 90 3.54" 54 2.13" 10 0.39" 4 0.16" 10 0.39" UA30 70 2.76" UA50, UA63, UA75-30-00 12 0.47" 70 2.76" 4.5 0.18" 108 4.25" 6 0.24" ø 6.2 0.24" M6 1/4-20 UNC 6.5 0.26" 90 3.54" 35 mm x15 EN/IEC 60715 UA26, UA30 drilling plan 4 0.16" 75 mm EN/IEC 60715 110 4.33" 74 2.91" 110 4.33" UA26 4.5 0.18" 10 0.39" 10 0.39" UA50, UA63, UA75-30-11 5 0.2" 60 2.36" 5 0.2" Drilling plan 78 3.07" 90 3.54" UA95, UA110-30-00 12 0.47" 90 3.54" UA95, UA110-30-11 6 0.24" 10 0.39" 20 0.79" ø 6.2 0.24" M6 1/4-20 UNC 136 5.35" 126 4.96" 148 5.83" 74 2.91" 148 5.83" 123.5 4.86" 6.5 0.26" 6 0.24" 1SBC101572S0201 4 0.16" ø 4.2 0.17" M4 8-32 UNC 100 3.94" 35 mm EN/IEC 60715 90 3.54" 54 2.13" 45 1.77" 6.3 0.25" 80 3.15" 9 0.35" 6.3 0.25" 70 2.76" 93.6 3.69" 9 0.35" 6 0.24" Drilling plan ABB | 5/285 Summary_5-6 5 5/286 | ABB Other contactor application data Contactor selection Control of three-phase slip-ring motors 5/288 Autotransformer starters 5/290 Three-phase transformer switching 5/291 Lighting circuit switching 5/293 Parallel connection of main poles 5/300 Temporary or intermittent duty 5/301 Summary_5-6 5 ABB | 5/287 Control of three-phase slip-ring motors Contactor selection General Three kinds of contactors are used to control three-phase slip-ring motors: the stator contactor, the acceleration contactor(s) and the rotor shortcircuit contactor. Refer to the diagram opposite. The selection tables below concern complete smooth starting, excluding specific cases, such as: intermittent operation, regenerative current, controlled slipping, etc. for which you need to consult our specialised departments. The starting and breaking technical data for slip-ring motors are defined in standard IEC 60947-4-1 in the AC-2 utilization category. The load factor is defined by the equation: Operating cycle L.F. (%) = x 100 Cycle time (Operating cycle + Rest cycle) Stator contactor Contactor types Load factor 15 % Ie / AC-2 25 % Ie / AC-2 40 % Ie / AC-2 60 % Ie / AC-2 S7 acc. to IEC 60034-1: periodical continuous duty with electrical breaking A A A A A AF09 18 15 13 11 9 AF12 24 20 17 14 12 AF16 33 31 26 22 18 AF26 52 44 38 31 26 AF30 64 54 46 38 32 AF38 76 65 55 46 38 AF40 79 68 58 48 40 AF52 106 90 77 64 53 AF65 124 111 94 78 65 AF80 154 136 116 96 80 AF96 184 163 139 115 96 Acceleration contactors The sizing of these contactors is based on the AC-1 rated operational current (see "Technical data") that we recall below for the maximum ambient temperature of 60 °C for AF09 to AF370 and 55 °C for AF400 to AF1650. The table below lists the factors to be applied to the AC-1 current of the contactors in order to obtain the maximal permissible value of the rotor current after contactor closing for star connection. If delta connection is used, increase by 50 % this current. This table takes into account the number of cycles an hour (without inching) and the current flow time per cycle, in the contactor. Number of cycles an hour Current flow time per cycle 5s 10 s 20 s 30 s 40 s 60 s Contactors Rated operational current Ie / AC-1 for air temperature near the contactor ≤ 60 °C A 1 3 6 Factors applicable to Ie / AC-1 5.2 4.9 4.7 3.8 3.6 3.4 2.8 2.7 2.6 2.4 2.3 2.2 2.2 2.1 2.0 1.9 1.8 1.8 12 20 30 60 120 4.3 3.1 2.5 2.1 1.9 1.7 4.0 3.0 2.4 2.1 1.9 1.7 3.7 2.8 2.2 1.9 1.7 1.5 3.4 2.6 2.0 1.7 1.5 - 2.8 2.2 1.6 - AF09 25 AF26 40 AF30 42 AF38 42 AF40 60 AF52 80 AF12 28 AF16 30 AF65 90 AF80 100 AF96 105 Rotor short-circuit contactor The duty of this contactor is characterized by small closing stresses. The decisive factor is the thermal stress. Delta connection of the contactor is considered (reduce currents by 35 % if star connection is used). The following table gives the permissible values of the rated operational rotor current, as a function of load factor. Temperature: 60 °C for AF09 to AF370 and 55 °C for AF400 to AF1650 maximum near the contactor. Contactor types Load factor 15 % Ie / AC-2 25 % Ie / AC-2 40 % Ie / AC-2 60 % Ie / AC-2 S7 acc. to IEC 60034-1: periodical continuous duty with electrical breaking Rated operational rotor voltage: – Maximum values for starting and breaking – Maximum values for starting and electrical braking 5/288 | ABB A A A A A AF09 63 57 49 43 36 AF12 71 64 55 48 41 AF16 76 69 59 51 44 V 1380 (1600 in star connection) V 690 (730 in star connection) AF26 102 92 78 68 58 AF30 107 96 82 72 61 AF38 107 96 82 72 61 AF40 152 137 117 103 87 AF52 203 183 157 137 116 AF65 228 206 176 154 131 AF80 254 229 196 171 145 AF96 266 241 206 180 152 2000 (2300 in star connection) 690 (730 in star connection) 1SBC101969S0201 5 Closing of the starting current, conditioned by the value of the rotor resistances: it may reach 1.5 to 4 times rated motor operational current. Breaking of the rated operational current, or of the starting current, with possible regenerative current. The following table gives the permissible values of the Ie / AC-2 rated operational stator current, as a function of load factor. Temperature of 60 °C for AF09 ... AF370 and 55 °C for AF400 ... AF1650 maximum near the contactor. Maximum switching frequency and electrical durability in AC-2 category: see "Technical data". Control of three-phase slip-ring motors Contactor selection Example of a three-stroke starter –– The first stroke corresponds to energization of the motor by the stator contactor: all the resistances are operational in the rotor circuit –– At the second stroke, the acceleration contactor short-circuits the first resistance stack –– At the third stroke, the rotor short-circuit contactor is activated by eliminating the last resistance stack, thus completing the starting period. Rotor short-circuit contactor Stator contactor Acceleration contactor R2 R1 M 3 5 Contactors Rated operational current Ie / AC-1 for air temperature near the contactor ≤ 60 °C (AF116-AF370) ≤ 55 °C (AF400-AF1650) Contactor types Load factor 15 % Ie / AC-2 25 % Ie / AC-2 40 % Ie / AC-2 60 % Ie / AC-2 S7 acc. to IEC 60034-1: periodical continuous duty with electrical breaking Rated operational rotor voltage: –M aximum values for starting and breaking –M aximum values for starting and electrical braking A A A A A AF116 220 185 150 135 116 AF140 335 270 215 180 140 AF370 750 620 515 430 370 AF400 850 680 580 480 400 AF460 950 780 650 550 460 AF580 1150 975 800 700 580 AF750 1500 1250 1050 900 750 AF1350 1720 1430 1200 1030 860 A AF116 AF140 AF190 AF205 AF265 AF305 AF370 145 175 250 300 350 400 500 AF400 500 AF460 600 AF580 700 AF750 800 AF1350 AF1650 1150 1450 A A A A A AF116 330 300 260 230 200 AF400 1200 1050 950 810 700 AF460 1400 1250 1100 975 840 AF580 1650 1450 1300 1150 980 AF750 1900 1650 1450 1300 1150 AF1350 2400 2100 1850 1650 1500 AF140 540 490 425 375 300 AF190 360 300 250 220 190 AF190 580 530 460 400 350 2200 (2600 in star connection) V 690 (730 in star connection) V AF205 425 350 300 255 210 AF205 750 650 575 500 380 AF265 530 440 370 315 265 AF265 830 725 630 575 480 AF305 625 515 430 370 305 AF305 950 830 720 650 550 AF370 1050 915 800 700 640 AF1650 2100 1750 1470 1250 1050 AF1650 2800 2500 2200 1950 1800 3000 (3600 in star connection) 1SBC101969S0201 Contactor types Load factor 15 % Ie / AC-2 25 % Ie / AC-2 40 % Ie / AC-2 60 % Ie / AC-2 S7 acc. to IEC 60034-1: periodical continuous duty with electrical breaking ABB | 5/289 Autotransformer starters Contactor selection Electrical distribution KM2 KM1 T1 Autotransformer KM3 Selection Table (Id starting current / In nominal current < 8 - Acceleration time ≤ 20s - 30 cycles / h max.) kW motor ratings 50/60 Hz 220/240 V 4 6.5 11 15 18.5 22 25 30 37 45 55 55 75 90 110 132 160 220 257 315 380/400 V 7.5 11 18.5 22 30 37 45 55 75 75 90 110 132 160 200 250 315 400 475 560 Contactors KM1 line 415 V 7.5 11 18.5 30 37 45 55 55 75 75 90 110 132 160 200 250 355 425 500 600 440 V 7.5 11 18.5 30 37 45 55 75 90 90 110 132 160 160 200 250 355 450 560 670 690 V 9 15 22 30 37 45 55 55 75 90 132 160 200 250 315 355 500 600 - AF16 AF26 AF38 AF52 AF65 AF80 AF96 AF116 AF140 AF146 AF190 AF205 AF265 AF305 AF370 AF460 AF580 AF750 AF1350 AF1650 KM2 autotransformer taps: 90 % 80 % AF16 AF12 AF26 AF16 AF30 AF26 AF52 AF38 AF52 AF40 AF65 AF52 AF80 AF65 AF116 AF80 AF140 AF96 AF140 AF96 AF146 AF116 AF190 AF140 AF265 AF190 AF265 AF205 AF370 AF265 AF400 AF305 AF580 AF400 AF750 AF580 AF750 AF580 AF1350 AF750 KM3 star 70 % AF09 AF16 AF26 AF30 AF30 AF40 AF52 AF65 AF80 AF80 AF96 AF116 AF140 AF190 AF190 AF265 AF305 AF400 AF460 AF580 60 % AF09 AF09 AF16 AF26 AF26 AF30 AF38 AF52 AF65 AF65 AF65 AF80 AF96 AF116 AF140 AF190 AF205 AF305 AF400 AF460 AF09 AF16 AF26 AF30 AF38 AF40 AF52 AF65 AF65 AF65 AF80 AF96 AF116 AF140 AF190 AF205 AF305 AF400 AF460 AF580 1SBC101699S0201 - Rev. A 5 General An autotransformer starter allows to start a squirel cage motor with a reduced starting current due to the reduced voltage within the accelerating duration. Unlike the star-delta wiring, this autotransformer starting method needs three wires and three terminals on the motor. At the starting period, the motor is wired to the autotransformer taps: the star contactor "KM3" and the autotransformer contactor "KM2" are closed, the motor is under reduced voltage. Consequently, the torque is reduced as the square of the applied voltage. The autotransformers are generally equipped of three taps at each phase in order to adapt the starting parameters to the field requirements. When the motor reaches 80...95 % of its nominal speed, the star contactor opens. Then, the line contactor "KM1" is making and the autotransformer contactor is opening. This starting process is done without any network interruption. 5/290 | ABB Three-phase transformer switching Contactor selection AC-6a Utilization category according to IEC 60947-4-1 General Switching the primary of 3-phase transformers, on energization of the transformer, is characterized by high current peaks due to the magnetization phenomena. Selection Table The tables below show the operational ratings for: –– current peaks up to 20 to 30 times the transformer nominal current –– maximum switching frequency of 60 operating cycles per hour –– air ambient temperature ≤ 40 °C. AC / DC operated contactors AF09 AF12 AF16 AF26 AF30 AF38 AF40 AF52 AF65 AF80 AF96 Operational power at Ue: 50/60 Hz - according to AC-6a 220 / 240 V kVA 4 5 6 10 13 14 15 19 21 23 25 380 / 400 V kVA 7 8 10 17 22 25 26 33 36 39 44 415 / 440 V kVA 8 9 11 18 24 27 28.5 36 40 43 48 500 V kVA 9 11 13 22 28 32 34.5 43 48 52 57 660 / 690 V kVA 12.5 14 18 29 37 43 45.5 57 64 68 75 A 350 400 500 800 1000 1200 1250 1550 1750 1900 2100 Max. permissible Îpeak AC / DC operated contactors 5 AF116 AF140 AF190 AF205 AF265 AF370 AF400 AF460 AF580 AF750 AF1250 AF1350 AF1650 220 / 240 V kVA 26 30 42 45 55 63 76 95 100 110 130 160 190 380 / 400 V kVA 46 52 73 75 94 108 132 165 170 190 240 275 350 415 / 440 V kVA 50 57 80 80 103 118 144 180 190 210 270 325 390 500 V kVA 60 68 96 100 124 143 173 220 230 250 320 – – 660 / 690 V kVA 80 90 127 130 164 188 228 290 300 310 410 – – 2100 2400 3300 3500 4300 4900 6000 7700 8400 9300 12000 – – Max. permissible Îpeak A 1SBC101970S0201 Operational power at Ue: 50/60 Hz - according to AC-6a ABB | 5/291 Notes N8 5 5/292 | ABB Lighting circuit switching Contactor selection General Contactor selection criteria for control of lighting circuits are as follows: – – type, power rating and number of lamps –– connection mode –– current values on closing and in steady state –– power factor –– presence or not of correction capacitors. Lighting circuits In a given circuit, the number and power rating of lamps are defined and cannot result in overload. Only short-circuit protection has to be provided. gG fuses or modular circuit-breakers will be chosen for this purpose. The lamps have very specific technical data, according to their construction type. –– Incandescent lamps have a very high current on closing: more than 15 times nominal current. They do not introduce a large phase displacement between current and voltage – – Fluorescent tubes are equipped with a ballast whose purpose is two-fold: contribute to ignition and limit current to nominal value once steady state is reached. This ballast is a reactor that considerably lowers the power factor. It may or may not be compensated. Individual compensation (parallel compensation) 5 Serial compensation in dual mounting S S S Selection of contactors The following tables indicate, for each contactor type, the maximum permissible number of lamps per phase. Air temperature, near the contactor, must be limited to 60 °C. Numbers are given for a 230 V voltage distributed between phase and neutral: single-phase (phase + neutral) or three-phase (3 phases + neutral) distribution, lamps are wired in star connection. In the case of a three-phase supply without neutral, 230 V phase-to-phase, the permissible number of lamps per phase will be that given in the tables multiplied by 0.58. 1SBC101961S0201 Example: 120 x 100 W / 230 V incandescent lamps - 400 V three-phase network with distributed neutral. Calculate the number of lamps per phase: 120 : 3 = 40. On the 100 W line of the incandescent lamp table, contactor AF09 is limited to 38 lamps per phase, you must thus select contactor AF12 which accepts up to 43 lamps per phase. ABB | 5/293 Lighting circuit switching Contactor selection AF09 ... AF146 Selection table 3-pole AC / DC operated contactors AF09 Lamp characteristics Maximum permissible number of lamps per phase W A AF12 AF16 AF26 AF30 AF38 AF40 AF52 AF65 AF80 AF96 AF116 AF140 AF146 μF Incandescent and halogen lamps Voltage: 220/240 V AC 60 0.27 64 72 77 103 129 148 177 207 233 259 277 430 519 541 100 43 46 62 77 89 106 124 140 155 166 258 311 324 0.45 - 38 according to AC-5b 200 0.91 - 19 21 23 30 38 44 52 61 69 77 82 127 154 160 300 1.37 - 12 14 15 20 25 29 35 41 46 51 54 85 102 107 500 2.28 - 7 8 9 12 15 17 21 24 27 30 33 51 61 64 1000 4.55 - 3 4 4 6 7 8 10 12 13 15 16 25 31 32 5 Fluorescent lamps without compensation - Fluorescent lamps with electronic starter Voltage: 220/240 V AC 20 0.38 46 51 55 73 84 92 126 147 157 184 210 305 368 384 40 133 155 177 258 311 324 0.45 - 38 43 46 62 71 77 106 124 according to AC-5a 65 0.70 - 25 27 30 40 45 50 68 80 85 100 114 166 200 209 80 0.80 - 21 24 26 35 40 43 60 70 75 87 100 145 175 183 100 1.15 - 15 16 18 24 27 30 41 48 52 60 69 101 122 127 110 1.20 - 14 16 17 23 26 29 40 46 50 58 66 97 117 122 Fluorescent lamps with parallel compensation Voltage: 220/240 V AC 20 0.18 5 53 53 53 155 168 176 266 309 325 388 444 644 778 811 40 107 123 134 184 215 230 269 307 446 538 562 0.26 5 53 53 53 according to AC-5a 65 0.42 7 37 37 37 66 76 83 114 133 142 166 190 276 333 348 80 0.52 7 33 37 37 53 61 67 92 107 115 134 153 223 269 281 100 0.65 16 16 16 16 43 49 53 73 86 92 107 123 178 215 225 110 0.70 18 14 14 14 40 45 49 68 80 85 100 114 166 200 209 Fluorescent lamps in dual mounting Voltage: 220/240 V AC 2 x 20 2 x 0.14 62 69 75 100 114 125 171 200 214 250 285 414 500 521 2 x 40 39 42 56 64 70 96 112 120 140 160 232 280 292 183 2 x 0.25 - 35 according to AC-5a 2 x 65 2 x 0.40 - 21 24 26 35 40 43 60 70 75 87 100 145 175 2 x 80 2 x 0.48 - 18 20 21 29 33 36 50 58 62 72 83 121 146 152 2 x 100 2 x 0.60 - 14 16 17 23 26 29 40 46 50 58 66 97 117 122 2 x 110 2 x 0.65 - 13 15 16 21 24 26 36 43 46 53 61 89 108 112 Compact fluorescent lamps Voltage: 220/240 V AC 5 0.045 - 388 433 466 622 711 777 1066 1244 1333 1555 1777 2578 3111 3244 7 233 260 280 373 426 466 640 746 800 933 1066 1547 1867 1947 0.075 - according to AC-5a 11 0.105 - 166 185 200 266 304 333 457 533 571 666 761 1105 1333 1390 15 0.135 - 129 144 155 207 237 259 355 414 444 518 592 859 1037 1081 0.160 - 109 121 131 175 200 218 300 350 375 437 500 725 875 913 0.180 - 97 108 116 155 177 194 266 311 333 388 444 644 778 811 1SBC101961S0201 20 23 5/294 | ABB Lighting circuit switching Contactor selection AF190 ... AF2650 Selection table 3-pole AC / DC operated contactors AF190 Lamp characteristics Maximum permissible number of lamps per phase W A AF205 AF265 AF305 AF370 AF400 AF460 AF580 AF750 AF1250 AF1350 AF1650 AF2050 AF2650 μF Incandescent and halogen lamps Voltage: 220/240 V AC 60 0.27 704 759 981 1130 1370 1481 1704 2148 2778 3009 3250 3972 4935 6380 100 456 589 678 822 889 1022 1289 1667 1806 1950 2383 2961 3828 0.45 - 422 according to AC-5b 200 0.91 - 209 225 291 335 407 440 505 637 824 893 964 1179 1464 1893 300 1.37 - 139 150 193 223 270 292 336 423 547 593 641 783 973 1257 500 2.28 - 83 90 116 134 162 175 202 254 329 356 385 470 584 755 1000 4.55 - 42 45 58 67 81 88 101 127 165 179 193 236 293 379 5 Fluorescent lamps without compensation - Fluorescent lamps with electronic starter Voltage: 220/240 V AC 20 0.38 500 539 697 803 974 1053 1211 1526 1974 2138 2309 2822 3507 4533 40 1667 1806 1950 2383 2961 3828 0.45 - 422 456 589 678 822 889 1022 1289 according to AC-5a 65 0.70 - 271 293 379 436 529 571 657 829 1071 1161 1254 1532 1904 2461 80 0.80 - 238 256 331 381 463 500 575 725 938 1016 1097 1341 1666 2153 100 1.15 - 165 178 230 265 322 348 400 504 652 707 763 933 1159 1498 110 1.20 - 158 171 221 254 308 333 383 483 625 677 731 894 1110 1435 Fluorescent lamps with parallel compensation Voltage: 220/240 V AC 20 0.18 5 1056 1139 1472 1694 2056 2222 2556 3222 4167 4514 4875 5958 7403 9569 40 1173 1423 1538 1769 2231 2885 3125 3375 4125 5125 6625 0.26 5 731 788 1019 according to AC-5a 65 0.42 7 452 488 631 726 881 952 1095 1381 1786 1935 2089 2554 3173 4101 80 0.52 7 365 394 510 587 712 769 885 1115 1442 1563 1688 2063 2563 3313 100 0.65 16 292 315 408 469 569 615 708 892 1154 1250 1350 1650 2050 2650 110 0.70 18 271 293 379 436 529 571 657 829 1071 1161 1254 1532 1904 2461 Fluorescent lamps in dual mounting Voltage: 220/240 V AC 2 x 20 2 x 0.14 679 732 946 1089 1321 1429 1643 2071 2679 2902 3134 3830 4759 6152 2 x 40 410 530 610 740 800 920 1160 1500 1625 1755 2145 2665 3445 2153 2 x 0.25 - 380 according to AC-5a 2 x 65 2 x 0.40 - 238 256 331 381 463 500 575 725 938 1016 1097 1341 1666 2 x 80 2 x 0.48 - 198 214 276 318 385 417 479 604 781 846 914 1117 1388 1794 2 x 100 2 x 0.60 - 158 171 221 254 308 333 383 483 625 677 731 894 1110 1435 2 x 110 2 x 0.65 - 146 158 204 235 285 308 354 446 577 625 675 825 1025 1325 Compact fluorescent lamps Voltage: 220/240 V AC 5 0.045 - 4222 4556 5889 6778 8222 8889 10222 12889 16667 18056 19500 23833 29611 38278 7 2533 2733 3533 4067 4933 5333 6133 7733 10000 10833 11700 14300 17767 22967 0.075 - according to AC-5a 11 0.105 - 1810 1952 2524 2905 3524 3810 4381 5524 7143 7738 8357 10214 12690 16405 15 0.135 - 1407 1519 1963 2259 2741 2963 3407 4296 5556 6019 6500 7944 9870 12759 0.160 - 1188 1281 1656 1906 2313 2500 2875 3625 4688 5078 5484 6703 8328 10766 0.180 - 1056 1139 1472 1694 2056 2222 2556 3222 4167 4514 4875 5958 7403 9569 1SBC101961S0201 20 23 ABB | 5/295 Lighting circuit switching Contactor selection AF09 ... AF146 Selection table 3-pole AC / DC operated contactors AF09 Lamp characteristics Maximum permissible number of lamps per phase 5 A AF16 AF26 AF30 AF38 AF40 AF52 AF65 AF80 AF96 AF116 AF140 AF146 μF Low pressure sodium vapour lamps without compensation Voltage: 220/240 V AC 35 1.4 9 10 12 15 15 16 23 31 35 39 42 70 85 89 55 15 16 23 31 35 39 42 70 85 89 1.4 - 9 10 12 15 90 2.1 - 6 7 8 10 10 10 15 20 23 26 28 47 57 59 135 3.1 - 4 4 5 6 7 7 10 14 15 17 19 32 38 40 180 3.1 - 4 4 5 6 7 7 10 14 15 17 19 32 38 40 Low pressure sodium vapour lamps with parallel compensation Voltage: 220/240 V AC 35 0.6 20 12 12 12 35 36 38 55 73 81 91 100 164 198 207 55 38 55 73 81 91 100 164 198 207 0.6 20 12 12 12 35 36 90 0.9 25 10 10 10 23 24 25 36 48 55 61 66 110 132 138 135 0.9 45 5 5 5 18 18 19 34 34 36 57 59 110 132 138 180 0.9 45 5 5 5 18 18 19 34 34 36 57 59 110 132 138 High pressure sodium vapour lamps without compensation Voltage: 220/240 V AC 150 1.8 7 8 9 11 12 12 18 24 27 30 33 45 54 57 250 7 7 11 14 16 18 20 27 33 34 3.0 - 4 5 5 7 400 4.4 - 3 3 3 4 5 5 7 10 11 12 13 18 22 23 600 6.2 - 2 2 2 3 3 3 5 7 7 8 9 13 16 16 1000 10.3 - 1 1 1 2 2 2 3 4 4 5 5 8 10 10 High pressure sodium vapour lamps with parallel compensation Voltage: 220/240 V AC 150 1.0 20 12 12 12 21 22 23 33 43 49 55 60 93 112 117 250 15 22 29 33 36 40 62 75 78 1.5 36 7 7 7 14 14 400 2.5 48 5 5 5 8 8 9 13 17 19 22 24 37 45 47 600 3.3 65 3 3 3 6 6 6 10 13 15 16 18 28 34 35 1000 6.2 100 2 2 2 3 3 3 5 7 7 8 9 15 18 19 214 High pressure mercury vapour lamps without compensation Voltage: 220/240 V AC 50 0.60 22 25 28 35 36 38 55 73 82 91 100 152 190 80 0.80 - 16 18 21 26 27 28 41 55 61 68 75 114 143 160 125 1.15 - 11 13 14 18 19 20 28 38 43 47 52 79 99 112 250 2.15 - 6 6 7 9 10 10 15 20 23 25 27 42 53 60 400 3.25 - 4 4 5 6 6 7 10 13 15 16 18 28 35 39 700 5.40 - 2 2 3 3 4 4 6 8 9 10 11 17 21 24 1000 7.50 - 1 2 2 2 2 3 4 5 6 7 8 12 15 17 Voltage: 380/415 V AC 2000 8.00 - 1 1 2 2 2 2 4 5 6 6 7 11 14 16 High pressure mercury vapour lamps with compensation Voltage: 220/240 V AC 50 0.28 7 36 36 36 75 78 82 117 157 176 196 214 326 407 458 80 51 53 76 102 115 127 139 212 265 298 0.43 8 31 31 31 48 125 0.66 10 20 22 25 31 33 34 50 66 75 83 90 138 173 194 250 1.28 18 10 11 13 16 17 17 25 34 38 42 46 71 89 100 400 2.05 25 6 7 8 10 10 11 16 21 24 26 29 44 56 63 700 3.55 40 3 4 4 5 6 6 9 12 13 15 16 26 32 36 1000 4.83 60 2 3 3 4 4 4 6 9 10 11 12 19 24 27 Voltage: 380/415 V AC 2000 5.45 35 2 2 3 3 4 4 6 8 9 10 11 17 21 24 5/296 | ABB 1SBC101961S0201 W AF12 Lighting circuit switching Contactor selection AF190 ... AF2650 Selection table 3-pole AC / DC operated contactors AF190 Lamp characteristics Maximum permissible number of lamps per phase A AF265 AF305 AF370 AF400 AF460 AF580 AF750 AF1250 AF1350 AF1650 AF2050 AF2650 μF Low pressure sodium vapour lamps without compensation Voltage: 220/240 V AC 35 1.4 115 124 161 185 225 243 279 352 455 493 533 651 809 1046 55 225 243 279 352 455 493 533 651 809 1046 1.4 - 115 124 161 185 90 2.1 - 77 83 107 123 150 162 186 235 304 329 355 434 539 697 135 3.1 - 52 56 73 84 101 110 126 159 206 223 241 294 365 472 180 3.1 - 52 56 73 84 101 110 126 159 206 223 241 294 365 472 Low pressure sodium vapour lamps with parallel compensation Voltage: 220/240 V AC 35 0.6 20 269 290 375 432 524 567 652 822 1063 1151 1243 1519 1888 2440 55 0.6 20 269 290 375 432 524 567 652 822 1063 1151 1243 1519 1888 2440 90 0.9 25 179 194 250 288 349 378 434 548 708 767 829 1013 1258 1627 135 0.9 45 179 194 250 288 349 378 434 548 708 767 829 1013 1258 1627 180 0.9 45 179 194 250 288 349 378 434 548 708 767 829 1013 1258 1627 High pressure sodium vapour lamps without compensation Voltage: 220/240 V AC 150 1.8 74 80 103 119 144 156 179 226 292 313 338 413 513 663 250 86 93 107 135 175 188 203 248 308 398 3.0 - 44 48 62 71 400 4.4 - 30 33 42 49 59 64 73 92 119 128 138 169 210 271 600 6.2 - 21 23 30 34 42 45 52 65 85 91 98 120 149 192 1000 10.3 - 13 14 18 21 25 27 31 39 51 55 59 72 90 116 High pressure sodium vapour lamps with parallel compensation Voltage: 220/240 V AC 150 1.0 20 152 164 212 244 296 320 368 464 600 625 675 825 1025 1325 250 213 245 309 400 417 450 550 683 883 1.5 36 101 109 141 163 197 400 2.5 48 61 66 85 98 118 128 147 186 240 250 270 330 410 530 600 3.3 65 46 50 64 74 90 97 112 141 182 189 205 250 311 402 1000 6.2 100 25 26 34 39 48 52 59 75 97 101 109 133 165 214 2518 High pressure mercury vapour lamps without compensation Voltage: 220/240 V AC 50 0.60 261 333 380 475 570 570 665 760 998 1188 1283 1568 1948 80 0.80 - 196 249 285 356 428 428 499 570 748 891 962 1176 1461 1888 125 1.15 - 136 173 198 248 297 297 347 397 520 620 669 818 1016 1313 250 2.15 - 73 93 106 133 159 159 186 212 278 331 358 437 543 703 400 3.25 - 48 61 70 88 105 105 123 140 184 219 237 289 360 465 700 5.40 - 29 37 42 53 63 63 74 84 111 132 143 174 216 280 1000 7.50 - 21 27 30 38 46 46 53 61 80 95 103 125 156 201 Voltage: 380/415 V AC 2000 8.00 - 20 25 29 36 43 43 50 57 75 89 96 118 146 189 High pressure mercury vapour lamps with compensation Voltage: 220/240 V AC 50 0.28 7 560 713 814 1018 1221 1221 1425 1629 2138 2545 2748 3359 4173 5395 80 795 795 928 1060 1392 1657 1790 2187 2717 3513 0.43 8 365 464 530 663 125 0.66 10 238 302 345 432 518 518 605 691 907 1080 1166 1425 1770 2289 250 1.28 18 122 156 178 223 267 267 312 356 468 557 601 735 913 1180 400 2.05 25 76 97 111 139 167 167 195 222 292 348 375 459 570 737 700 3.55 40 44 56 64 80 96 96 112 128 169 201 217 265 329 425 1000 4.83 60 32 41 47 59 71 71 83 94 124 148 159 195 242 313 Voltage: 380/415 V AC 2000 5.45 35 29 37 42 52 63 63 73 84 110 131 141 173 214 277 ABB | 5/297 5 1SBC101961S0201 W AF205 Lighting circuit switching Contactor selection AF09 ... AF146 Selection table 3-pole AC / DC operated contactors AF09 Lamp characteristics Maximum permissible number of lamps per phase W AF16 AF26 AF30 AF38 AF40 AF52 AF65 AF80 AF96 AF116 AF140 AF146 μF Metal halide vapour lamps without compensation Voltage: 220/240 V AC 250 3 4 5 5 7 7 7 11 14 16 18 20 27 33 38 400 5 5 5 8 11 12 13 15 20 25 28 4 - 3 3 4 1000 9.5 - 1 1 1 2 2 2 3 4 5 5 6 8 11 12 2000 16.5 - 0 0 1 1 1 1 2 2 3 3 3 5 6 7 Voltage: 380/415 V AC 2000 10.5 - 1 1 1 2 2 2 3 4 4 5 5 8 10 11 Metal halide vapour lamps with compensation Voltage: 220/240 V AC 250 1.32 33 7 7 7 15 16 17 25 33 37 41 45 69 86 97 400 9 9 10 14 19 22 24 27 41 51 58 2.22 45 5 5 5 1000 5.14 85 2 2 3 4 4 4 6 8 9 10 11 18 22 25 2000 11.5 148 1 1 1 1 1 2 2 3 4 4 5 8 10 11 2 2 2 3 3 3 5 7 8 9 9 15 19 21 Voltage: 380/415 V AC 2000 6.10 60 1SBC101961S0201 5 A AF12 5/298 | ABB Lighting circuit switching Contactor selection AF190 ... AF2650 Selection table 3-pole AC / DC operated contactors AF190 Lamp characteristics Maximum permissible number of lamps per phase W A AF205 AF265 AF305 AF370 AF400 AF460 AF580 AF750 AF1250 AF1350 AF1650 AF2050 AF2650 μF Metal halide vapour lamps without compensation Voltage: 220/240 V AC 250 3 46 58 67 83 100 100 117 133 175 208 225 275 342 442 400 63 75 75 88 100 131 156 169 206 256 331 4 - 34 44 50 1000 9.5 - 14 18 21 26 32 32 37 42 55 66 71 87 108 139 2000 16.5 - 8 11 12 15 18 18 21 24 32 38 41 50 62 80 13 17 19 24 29 29 33 38 50 60 64 79 98 126 Voltage: 380/415 V AC 2000 10.5 - 5 Metal halide vapour lamps with compensation Voltage: 220/240 V AC 250 1.32 33 119 151 173 216 259 259 302 345 453 540 583 713 885 1144 400 128 154 154 180 205 270 321 347 424 526 680 2.22 45 71 90 103 5.14 85 30 39 44 55 67 67 78 89 116 139 150 183 227 294 11.5 148 14 17 20 25 30 30 35 40 52 62 67 82 102 131 26 33 37 47 56 56 65 75 98 117 126 154 192 248 Voltage: 380/415 V AC 2000 6.10 60 1SBC101961S0201 1000 2000 ABB | 5/299 Parallel connection of main poles General Purpose: Increasing the AC resistive load by wiring connection of main poles in parallel. Remarks: –– Parallel connection of main poles to increase the DC resistive load is not acceptable –– Parallel connection of main poles does not increase the breaking capacity. The table below shows the uprating factor for Ie / AC-1 max. in relation to the number of poles wired connected in parallel and for a maximum switching frequency. Note: The poles can be connected in parallel via following connecting strips. See details and permissible current in "Accessory" part. –– LP, LH, LY and LF for parallel connection of 2 or 3 poles –– LG for parallel connection of 4 poles. L1 L2 L3 2 poles in parallel N 3 poles in parallel N A827D L1 L2 L3 A826D N A825D L1 L2 L3 5 4 poles in parallel Contactors AC operated DC operated Cycles / h Factor to be applied to the rated operational current Ie / AC-1 to obtain the permissible current Ie / AC-1 with "n" poles in parallel 3-pole contactors AF09 ... AF96 AF116 … AF1250 AF1350 … AF2650 AF09 ... AF96 AF116 … AF1250 AF1350 … AF2650 600 300 30 1.6 1.6 1.6 2.2 2.2 2.2 – – – AF09 ... AF38 600 1.6 2.2 2.6 AE45 ... AE75 TAE45 ... TAE75 AF45 ... AF75 EK 300 1.6 2.2 2.6 300 1.6 2.2 2.8 4-pole contactors AF09 ... AF38 A45 ... A75 AF45 ... AF75 1SBC101972S0201 EK 5/300 | ABB Temporary or intermittent duty Utilization of contactors for temporary / intermittent duty The table below shows the factor (known as "On-load factor") to be applied to the rated operational current Ie / AC-1 to obtain the permissible operational current Ie / AC-1 in relation to the switching frequency and the current flow time per cycle. Operating cycles per hour 1 2 3 6 12 20 30 60 120 Prefered classes acc. to IEC 60947-4-1 1 – 3 – 12 – 30 – 120 Current flow time per cycle Factors applicable to Ie / AC-1 5 4.9 4.7 4.3 4.0 3.7 3.4 2.8 10 s 3.8 5 s 5.2 3.7 3.6 3.4 3.1 3.0 2.8 2.6 2.2 20 s 2.8 2.7 2.7 2.6 2.5 2.4 2.2 2.0 1.5 30 s 2.4 2.3 2.3 2.2 2.1 2.1 1.9 1.7 – 40 s 2.2 2.1 2.1 2.0 1.9 1.9 1.7 1.5 – 60 s 1.9 1.8 1.8 1.8 1.7 1.7 1.5 – – 5 Example: AF09 contactor (intermittent duty, resistive load) (see "Technical data: main pole utilization characteristics") 25 A Switching frequency 2 operating cycles/h Current flow time per cycle 20 s Factor to be applied to the current Ie / AC-1 2.7 Permissible current: 2.7 x 25 = 67 A 1SBC101971S0201 Rated operational current Ie / AC-1 at 60 °C ABB | 5/301 Summary_5-7 5 5/302 | ABB NF 4-pole and 8-pole contactor relays Ordering details 4-pole contactor relays NF AC / DC operated 5/304 NFZ AC / DC operated - low consumption 5/305 Main accessories 5/306 Ordering details 8-pole contactor relays NF AC / DC operated 5/308 NFZ AC / DC operated - low consumption 5/309 5/310 Technical data 5/312 Terminal marking and positioning 5/315 Main dimensions 5/317 Voltage code table 5/392 5 Summary_5-7 Main accessories ABB | 5/303 NF 4-pole contactor relays AC / DC operated Description 1SBC101104F0014 NF contactor relays are used for switching auxiliary and control circuits. NF22E These contactor relays are of the block type design with: –– 4 poles. Contactor relays have mechanically linked auxiliary contact elements (side-marked symbol) –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC) -- can manage large control voltage variations -- only 4 control voltage ranges covering 24...500 V 50/60 Hz and 20...500 V DC -- reduced panel energy consumption -- very distinct closing and opening. –– built-in surge suppression –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. Ordering details Number of contacts 5 A1 13 NO 21 NC 31 NC 43 NO A2 NO 14 NC 22 NC 32 NO 44 A1 13 NO 21 NC 33 NO 43 NO A2 NO 14 NC 22 NO 34 NO 44 A1 13 NO 23 NO 33 NO 43 NO A2 NO 14 NO 24 NO 34 NO 44 Rated control circuit voltage Uc min. ... Uc max. V 50/60 Hz 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 V DC 48...130 100...250 250...500 48...130 100...250 250...500 48...130 100...250 250...500 Type Order code Weight Pkg (1 pce) (1) NF22E-41 NF22E-12 NF22E-13 NF22E-14 (1) NF31E-41 NF31E-12 NF31E-13 NF31E-14 (1) NF40E-41 NF40E-12 NF40E-13 NF40E-14 1SBH137001R4122 1SBH137001R1222 1SBH137001R1322 1SBH137001R1422 1SBH137001R4131 1SBH137001R1231 1SBH137001R1331 1SBH137001R1431 1SBH137001R4140 1SBH137001R1240 1SBH137001R1340 1SBH137001R1440 kg 0.270 0.270 0.270 0.310 0.270 0.270 0.270 0.310 0.270 0.270 0.270 0.310 (1) For 24...60 V 50/60 Hz - 20...60 V DC, use NF..E-11 (see voltage code table). NF..E-11 not suitable for direct control by PLC-output. Main dimensions mm, inches 77 3.03" 35 1.38" 10 0.39" 5 0.20" NF22E, NF31E, NF40E 5/304 | ABB 1SBC101558S0201 - Rev. A 60 2.36" 35 mm EN/IEC 60715 6 0.24" 80 3.15" 5.5 0.22" 2x M4 8-32 UNC 70 2.76" ø 4.2 0.17" 5.5 0.22" 5 0.20" 71 2.80" 45 1.77" NFZ 4-pole contactor relays AC / DC operated - low consumption Description Ordering details Number of contacts A1 13 NO 21 NC 31 NC 43 NO A2 NO 14 NC 22 NC 32 NO 44 A1 13 NO 21 NC 33 NO 43 NO A2 NO 14 NC 22 NO 34 NO 44 A1 13 NO 23 NO 33 NO 43 NO A2 NO 14 NO 24 NO 34 NO 44 Rated control circuit voltage Uc min. ... Uc max. V 50/60 Hz – 24...60 48...130 100...250 – 24...60 48...130 100...250 – 24...60 48...130 100...250 Type Order code 5 Weight Pkg (1 pce) V DC 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 NFZ22E-20 NFZ22E-21 NFZ22E-22 NFZ22E-23 NFZ31E-20 NFZ31E-21 NFZ31E-22 NFZ31E-23 NFZ40E-20 NFZ40E-21 NFZ40E-22 NFZ40E-23 1SBH136001R2022 1SBH136001R2122 1SBH136001R2222 1SBH136001R2322 1SBH136001R2031 1SBH136001R2131 1SBH136001R2231 1SBH136001R2331 1SBH136001R2040 1SBH136001R2140 1SBH136001R2240 1SBH136001R2340 kg 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 Note: Only NFZ contactor relays with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole. mm, inches 77 3.03" 35 1.38" 60 2.36" 35 mm EN/IEC 60715 5.5 0.22" 2x M4 8-32 UNC 70 2.76" ø 4.2 0.17" 5.5 0.22" 1SBC101559S0201 - Rev. A 71 2.80" 45 1.77" 5 0.20" Main dimensions 6 0.24" NFZ22E These contactor relays are of the block type design with: –– 4 poles. Contactor relays have mechanically linked auxiliary contact elements (side-marked symbol) –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC) -- can manage large control voltage variations -- only 4 control voltage ranges covering 24...250 V 50/60 Hz and 12...250 V DC -- allow direct control by PLC-output ≥ 24 V DC 500 mA -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. 80 3.15" 1SBC101104F0014 NFZ contactor relays are used for switching auxiliary and control circuits. 10 0.39" 5 0.20" NFZ22E, NFZ31E, NFZ40E ABB | 5/305 NF 4-pole contactor relays Main accessories Contactor relays and main accessories (other accessories available) NF contactor relay TEF4 Electronic timer BX4-CA Protective cover 5 CAL4-11 2-pole auxiliary contact block CA4 4-pole auxiliary contact block BX4 Protective cover BX4-CA Protective cover CA4, CC4 1-pole auxiliary contact block Main accessory fitting details Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor relay types Front-mounted accessories Auxiliary contact blocks Main poles Electronic timer Side-mounted accessories Auxiliary contact blocks TEF4 2-pole CAL4-11 1-pole CA4 1-pole CC4 Left side 4-pole CA4 Right side Max. add-on N.C. auxiliary contacts: 3 N.C. max. on positions 1, 2, 3, 4 and 2 N.C. max. on positions 1 ±30°, 5 NF 2 3 2 1 E E 4 max. 2 max. 4 0 E 4 max. 2 max. or 1 – or 1 or 1 + + 1 1 + – 1 + – 1 Max. add-on N.C. auxiliary contacts: 4 N.C. max. on positions 1, 2, 3, 4 and 3 N.C. max. on positions 1 ±30°, 5 or 1 – or 1 or 1 + + 1 1 1SBC101518S0201 - Rev. A NF 5/306 | ABB NF 4-pole contactor relays Main accessories Ordering details (1) 1SBC101108F0014 For contactor relays Auxiliary contacts Type Order code Pkg qty Weight (1 pce) kg CA4-10 1SBC101123F0014 Front-mounted instantaneous auxiliary contact blocks 4-pole NF 1 0 – – CA4-10 1 0 – – CA4-10-T 0 1 – – CA4-01 0 1 – – CA4-01-T 4 0 – – CA4-40N 3 1 – – CA4-31N 2 2 – – CA4-22N 1 3 – – CA4-13N NF..40E 0 4 – – CA4-04N 1SBC101112F0014 CA4-22N CAL4-11 1SBN010110R1010 1SBN010110T1010 1SBN010110R1001 1SBN010110T1001 1SBN010140R1240 1SBN010140R1231 1SBN010140R1222 1SBN010140R1213 1SBN010140R1204 1 10 1 10 1 1 1 1 1 Front-mounted auxiliary contact blocks with N.O. leading contact and N.C. lagging contact 4-pole NF – – 1 0 CC4-10 1SBN010111R1010 1 – – 0 1 CC4-01 1SBN010111R1001 1 0.014 0.014 Side-mounted instantaneous auxiliary contact blocks NF 1 1 – – CAL4-11 1 1 – – CAL4-11-T 1SBN010120R1011 1SBN010120T1011 1 10 0.040 0.040 For contactors Order code Pkg qty Weight (1 pce) Time delay range Delay type Auxiliary Type contacts 1SBC101392F0014 selected by switch 1SBC101133F0014 TEF4-ON 0.014 0.014 0.014 0.014 0.055 0.055 0.055 0.055 0.055 Electronic timers NF 0.1...1 s 1...10 s 10...100 s 5 kg ON-delay 1 1 TEF4-ON 1SBN020112R1000 1 0.065 OFF-delay 1 1 TEF4-OFF 1SBN020114R1000 1 0.065 Additional coil terminal block NF LDC4 1SBN070156T1000 10 0.010 Protective covers All 1-stack contactor relays 4-pole CA4 auxiliary contact blocks and TEF4 electronic timer BX4 BX4-CA 1SBN110108T1000 1SBN110109W1000 10 50 0.006 0.001 Note: Rated control circuit voltage Uc 24...240 V 50/60 Hz or DC. (1) For more information, refer to main catalog "Accessories" section. 1SBC101136F0014 LDC4 1SBC101519S0201 - Rev. A 1SBC101138F0014 BX4 BX4-CA ABB | 5/307 NF 8-pole contactor relays AC / DC operated Description 1SBC101029V0014 NF contactor relays are used for switching auxiliary and control circuits. NF44E These contactor relays are of the block type design with: –– 8 poles with a permanently fixed 4-pole auxiliary contact block. Contactor relays have mechanically linked auxiliary contact elements (side-marked symbol) except for NF33/11 and NF51/11 variants –– overlapping of lagging / leading contacts for NF33/11 and NF51/11 variants –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC) -- can manage large control voltage variations -- only 4 coils to cover control voltages between 24...500 V 50/60 Hz and 20...500 V DC -- reduced panel energy consumption -- very distinct closing and opening –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details 5 Number of contacts 1SBC101042V0014 1st stack Rated control circuit voltage Uc min. ... Uc max. 2nd stack 1SBC101043V0014 V DC 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 48...130 100...250 250...500 48...130 100...250 250...500 48...130 100...250 250...500 48...130 100...250 250...500 48...130 100...250 250...500 Order code Weight Pkg (1 pce) kg 8-pole contactor relays A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 NF33/11 NF51/11 V 50/60 Hz Type (1) NF44E-41 NF44E-12 NF44E-13 NF44E-14 (1) NF53E-41 NF53E-12 NF53E-13 NF53E-14 (1) NF62E-41 NF62E-12 NF62E-13 NF62E-14 (1) NF71E-41 NF71E-12 NF71E-13 NF71E-14 (1) NF80E-41 NF80E-12 NF80E-13 NF80E-14 8-pole contactor relays with overlapping of lagging / leading contacts 24...60 (1) NF33/11-41 A1 41 13 23 33 51 61 75 87 NO NO NO NC NC NC NC NO 48...130 48...130 NF33/11-12 100...250 100...250 NF33/11-13 NO NO NO NC NC NC NC NO 14 24 34 42 52 62 76 88 A2 250...500 250...500 NF33/11-14 24...60 (1) NF51/11-41 A1 43 13 23 33 53 61 75 87 NO NO NO NO NO NC NC NO 48...130 48...130 NF51/11-12 100...250 100...250 NF51/11-13 NO NO NO NO NO NC NC NO 14 24 34 44 54 62 76 88 A2 250...500 250...500 NF51/11-14 1SBH137001R4144 1SBH137001R1244 1SBH137001R1344 1SBH137001R1444 1SBH137001R4153 1SBH137001R1253 1SBH137001R1353 1SBH137001R1453 1SBH137001R4162 1SBH137001R1262 1SBH137001R1362 1SBH137001R1462 1SBH137001R4171 1SBH137001R1271 1SBH137001R1371 1SBH137001R1471 1SBH137001R4180 1SBH137001R1280 1SBH137001R1380 1SBH137001R1480 0.320 0.320 0.320 0.360 0.320 0.320 0.320 0.360 0.320 0.320 0.320 0.360 0.320 0.320 0.320 0.360 0.320 0.320 0.320 0.360 1SBH137001R4139 1SBH137001R1239 1SBH137001R1339 1SBH137001R1439 1SBH137001R4159 1SBH137001R1259 1SBH137001R1359 1SBH137001R1459 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 (1) For 24...60 V 50/60 Hz - 20...60 V DC, use NF..-11 (see voltage code table). NF..-11 not suitable for direct control by PLC-output. Main dimensions mm, inches 110.5 4.35" 35 1.38" NF44E, NF53E, NF62E, NF71E, NF80E, NF33/11, NF51/11 5/308 | ABB 2x M4 8-32 UNC 70 2.76" 60 2.36" 43 1.69" 35 mm EN/IEC 60715 6 0.24" 80 3.15" 5.5 0.22" ø 4.2 0.17" 5 0.20" 1SBC101560S0201 - Rev. B 10 0.39" 5.5 0.22" 5 0.20" 71 2.80" 45 1.77" NFZ 8-pole contactor relays AC / DC operated Description 1SBC101029V0014 NFZ contactor relays are used for switching auxiliary and control circuits. NFZ44E These contactor relays are of the block type design with: –– 8 poles with a permanently fixed 4-pole auxiliary contact block. Contactor relays have mechanically linked auxiliary contact elements (side-marked symbol) except for NFZ33/11 and NFZ51/11 variants –– overlapping of lagging / leading contacts for NFZ33/11 and NFZ51/11 variants –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC) -- can manage large control voltage variations -- only 4 coils to cover control voltages between 24 ... 250 V 50/60 Hz and 12 ... 250 V DC -- allow direct control by PLC-output ≥ 24 V DC 500 mA -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. 5 Ordering details 1st stack Rated control circuit voltage Uc min. ... Uc max. 2nd stack A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 V DC 24...60 48...130 100...250 24...60 48...130 100...250 24...60 48...130 100...250 24...60 48...130 100...250 24...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 Order code Weight Pkg (1 pce) kg NFZ44E-20 NFZ44E-21 NFZ44E-22 NFZ44E-23 NFZ53E-20 NFZ53E-21 NFZ53E-22 NFZ53E-23 NFZ62E-20 NFZ62E-21 NFZ62E-22 NFZ62E-23 NFZ71E-20 NFZ71E-21 NFZ71E-22 NFZ71E-23 NFZ80E-20 NFZ80E-21 NFZ80E-22 NFZ80E-23 8-pole contactor relays with overlapping of lagging / leading contacts 12...20 NFZ33/11-20 A1 41 13 23 33 51 61 75 87 NO NO NO NC NC NC NC NO 24...60 20...60 NFZ33/11-21 48...130 48...130 NFZ33/11-22 NO NO NO NC NC NC NC NO 14 24 34 42 52 62 76 88 A2 100...250 100...250 NFZ33/11-23 12...20 NFZ51/11-20 A1 43 13 23 33 53 61 75 87 NO NO NO NO NO NC NC NO 24...60 20...60 NFZ51/11-21 48...130 48...130 NFZ51/11-22 NO NO NO NO NO NC NC NO 14 24 34 44 54 62 76 88 A2 100...250 100...250 NFZ51/11-23 1SBH136001R2044 1SBH136001R2144 1SBH136001R2244 1SBH136001R2344 1SBH136001R2053 1SBH136001R2153 1SBH136001R2253 1SBH136001R2353 1SBH136001R2062 1SBH136001R2162 1SBH136001R2262 1SBH136001R2362 1SBH136001R2071 1SBH136001R2171 1SBH136001R2271 1SBH136001R2371 1SBH136001R2080 1SBH136001R2180 1SBH136001R2280 1SBH136001R2380 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 1SBH136001R2039 1SBH136001R2139 1SBH136001R2239 1SBH136001R2339 1SBH136001R2059 1SBH136001R2159 1SBH136001R2259 1SBH136001R2359 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 Note: Only NFZ contactor relays with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole Main dimensions mm, inches 110.5 4.35" 35 1.38" 2x M4 8-32 UNC 70 2.76" 60 2.36" 6 0.24" 35 mm EN/IEC 60715 5.5 0.22" ø 4.2 0.17" 1SBC101561S0201 - Rev. B 10 0.39" 5.5 0.22" 5 0.20" 71 2.80" 45 1.77" 80 3.15" 1SBC101043V0014 NFZ33/11 NFZ51/11 V 50/60 Hz Type 8-pole contactor relays 43 1.69" 1SBC101042V0014 Number of contacts 5 0.20" NFZ44E, NFZ53E, NFZ62E, NFZ71E, NFZ80E, NFZ33/11, NFZ51/11 ABB | 5/309 NF 8-pole contactor relays Main accessories Contactor relays and main accessories (other accessories available) NF contactor relay 5 BX4-CA Protective cover 2-pole CAL4-11 Main accessory fitting details Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor relay types Front-mounted accessories Auxiliary contact blocks Main poles Side-mounted accessories Auxiliary contact blocks 1-pole CA4 4 5 6 7 8 3 5 4 3 2 1 0 3 1 E E E E E / / 4-pole CA4 – – Right side 2-pole CAL4-11 + 1 – 1 1 1 1 1SBC101598S0201 - Rev. B NF Left side 1-pole CC4 5/310 | ABB NF 8-pole contactor relays Main accessories Ordering details (1) 1SBC101112F0014 For contactor relays Type Order code Pkg qty Weight (1 pce) kg Side-mounted instantaneous auxiliary contact blocks NF 1SBC101133F0014 CAL4-11 LDC4 Auxiliary contacts 1 1 1 1 – – – – CAL4-11 CAL4-11-T 1SBN010120R1011 1SBN010120T1011 1 10 0.040 0.040 LDC4 1SBN070156T1000 10 0.010 BX4-CA 1SBN110109W1000 50 0.001 Additional coil terminal block NF Protective covers NF 5 1SBC101138F0014 (1) For more information, refer to "Accessories" section. 1SBC101654S0201 - Rev. A BX4-CA ABB | 5/311 NF contactor relays Technical data Contact utilization characteristics according to IEC AC / DC operated Contactor relay types Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith θ ≤ 40 °C Ie / Rated operational current AC-15 24-127 V 50/60 Hz acc. to IEC 60947-5-1 220-240 V 50/60 Hz 400-440 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz Short-circuit protection device gG type fuse Rated short-time withstand current Icw 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC 400 V DC 500 V DC 600 V DC for 1.0 s for 0.1 s Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Non-overlapping time between N.O. and N.C. contacts Power dissipation per pole at 6 A AC-15 Max. electrical switching frequency DC-13 Mechanically linked contacts acc. to annex L of IEC 60947-5-1 6A 4A 3A 2A 2A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.27 A / 60 W 0.27 A / 68 W 0.15 A / 60 W 0.13 A / 65 W 0.1 A / 60 W 10 A 100 A 140 A 12 V / 3 mA 10-7 ≥ 2 ms 0.1 W 1200 cycles/h 900 cycles/h Built-in N.O. or N.C. auxiliary contacts and additional N.O. or N.C. auxiliary contacts (CA4, CAL4 aux. contact blocks) are mechanically linked contacts. Contact utilization characteristics according to UL / CSA AC / DC operated Contactor relay types Standards Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking NF UL 508, CSA C22.2 N°14 600 V AC, 600 V DC A600, Q600 10 A 7200 VA 720 VA 2.5 A 69 VA 1SBC101562S0201 - Rev. A 5 Rated making capacity AC-15 Rated breaking capacity AC-15 Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 NF IEC 60947-1 / 60947-5-1 and EN 60947-1 / 60947-5-1 690 V 50 / 60 Hz 16 A 5/312 | ABB NF contactor relays Technical data General technical data AC / DC operated Contactor relay types Rated insulation voltage Ui acc. to IEC 60947-5-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Electromagnetic compatibility Ambient air temperature close to contactor relay Operation in free air Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency Shock withstand NF 690 V 600 V 6 kV Devices complying with IEC 60947-1 / EN 60947-1 - Environment A -40...+70 °C -60...+80 °C Category B according to IEC 60947-1 Annex Q 3000 m 20 millions operating cycles 6000 cycles/h 5 acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 C1 A A B1 Shock direction A B1 B2 C1 C2 B2 C2 Vibration withstand acc. to IEC 60068-2-6 1/2 sinusoidal shock for 11 ms: no change in contact position, closed or open position 30 g 25 g closed position / 5 g open position 15 g 25 g 25 g 5...300 Hz 4 g closed position / 2 g open position Magnet system characteristics Contactor relay types Coil operating limits NF At θ At θ DC supply At θ At θ AC / DC operated AC supply acc. to IEC 60947-5-1 AC control voltage 50/60 Hz Rated control circuit voltage Uc Coil consumption DC control voltage Rated control circuit voltage Uc Coil consumption PLC-output control Drop-out voltage Voltage sag immunity acc. to SEMI F47-0706 Dips withstand -20 °C ≤ θ ≤ +60 °C Operating time Between coil energization and: Between coil de-energization and: Average pull-in value Average holding value Average pull-in value Average holding value ≤ ≤ ≤ ≤ 60 70 60 70 °C °C °C °C 0.85 x Uc min...1.1 x Uc max. 0.85 x Uc min...Uc max. 0.85 x Uc min...1.1 x Uc max. (AF) 0.85 x Uc min...Uc max. - (NFZ) 0.85 x Uc min...1.1 x Uc max. 24...500 V AC (NF) 50 VA - (NFZ) 16 VA (NF) 2.2 VA / 2 W - (NFZ) 1.7 VA / 1.5 W 12...500 V DC (NF) 50 W - (NFZ) 12...16 W (NF) 2 W - (NFZ) 1.7 W (NFZ) ≥ 500 mA 24 V DC ≤ 60 % of Uc min. (NFZ) conditions of use on request (NFZ) 22 ms average for Uc ≥ 24 V 50/60 Hz or Uc ≥ 20 V DC N.O. contact closing N.C. contact opening N.O. contact opening N.C. contact closing 40...95 38...90 11...95 13...98 ms ms ms ms Mounting characteristics Contactor relay types Mounting positions AC / DC operated NF Pos. 2 +30° -30° Pos. 4 Pos. 3 Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) Pos. 1 ± 30° Pos. 5 1SBC101563S0201 - Rev. A Pos. 1 Max. add-on N.C. auxiliary contacts: see accessory fitting details for a NF contactor relay The contactor relays can be assembled side by side. 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally ABB | 5/313 NF contactor relays Technical data Connecting characteristics Contactor relay types Main terminals AC / DC operated NF Screw terminals with cable clamp Connection capacity (min. ... max.) Pole and coil terminals Rigid Flexible with non insulated ferrule Flexible with insulated ferrule L 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 8 mm 6 1 or 2 x Connection capacity acc. to UL/CSA Stripping length Tightening torque Pole terminals Coil terminals Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 All terminals Screw terminals All terminals AWG 18...14 10 mm 1.2 Nm / 11 lb.in 1.2 Nm / 11 lb.in IP20 Delivered in open position, screws of unused terminals must be tightened M3.5 Screwdriver type Flat Ø 5.5 / Pozidriv 2 1SBC101564S0201 - Rev. A 5 Lugs 1x 2x 1x 2x 1x 2x L< 5/314 | ABB NF contactor relays Terminal marking and positioning Standard devices without addition of auxiliary contacts 13 A1 A2 21 31 13 43 A1 A2 21 33 43 13 NO NC NO NO NO NC NC NO A1 A2 23 33 43 13 NO NO NO NO A1 A2 23 33 NO NO NO NO 51 61 71 81 NO NC NC NO NO NC NO NO NO NO NO NO 52 62 72 82 NO NO NO NO 14 14 14 14 32 A1 A2 44 NF..22E 13 22 34 A1 A2 44 NF..31E A1 A2 23 33 43 13 24 34 A1 A2 44 NF..40E A1 A2 23 33 43 13 24 34 A1 A2 A2 23 33 43 13 A1 A2 23 33 NO NO NO NO 53 61 73 83 NO NO NO NO 53 63 73 83 NO NC NC NC NO NC NC NO NO NC NO NO NO NO NO NO 54 62 72 82 NO NO NO NO 54 62 72 84 NO NO NO NO 54 62 74 84 NO NO NO NO 54 64 74 84 NO NO NO NO 14 14 14 14 34 A2 44 NF..53E 13 24 34 A1 A2 44 A2 23 33 41 13 A1 A2 23 33 NO NO NO NO 53 61 75 87 NC NC NC NO NO NC NC NO 52 62 76 88 NO NO NO NC 54 62 76 88 NO NO NO NO 14 14 24 34 A2 42 NF..33/11 A2 44 24 34 A1 A2 A2 NO 14 NC 22 NC 32 NO 44 24 34 A1 A2 A1 13 NO 21 NC 33 NO 43 NO A2 NO 14 NC 22 NO 34 NO 44 NF..31E A1 13 NO 23 NO 33 NO 43 NO A2 NO 14 NO 24 NO 34 NO 44 A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 NF..44E A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 5 NF..53E NF..62E A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 44 NF..71E NF..80E NF..80E A1 13 NO 23 NO 33 NO 41 NC 51 NC 61 NC 75 NC 87 NO A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 75 NC 87 NO A2 NO 14 NO 24 NO 34 NC 42 NC 52 NC 62 NC 76 NO 88 A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 76 NO 88 43 NO NO NO NC 51 61 75 87 A1 34 A1 NF..71E NF..62E A1 24 43 NO 43 NO NO NO NO 53 61 71 83 24 31 NC NF..40E NO NO NO NO 53 61 71 81 A1 21 NC 44 NF..44E A1 13 NO NF..22E NC NC NC NC 22 A1 43 NF..51/11 NF..33/11 44 NF..51/11 Other possible contact combinations with auxiliary contacts added by the user A1 A2 21 33 43 13 A2 21 33 13 43 NO NC NO NO 5- NO NC NO NO 53 NO A1 = + 54 NO NC NO NO 5NO NC NO NO 14 14 22 34 A1 A2 44 22 34 A1 A2 A1 A2 23 33 + A2 23 33 5- 6NO NO NO NO 14 14 CA4-10 A1 A2 23 33 NO NO NO NO 5- 6= 24 34 A1 A2 44 24 34 A2 NO NO NO NO NC NC 13 A1 A2 23 33 A2 23 33 = + 54 62 72 84 NO NO NO NO NO NO NO NO 14X 14X 14 14 14 34 A2 44 Combination 51 = CAL4-11 + 24 34 A1 A2 NF..40E 44 24 34 A1 A2 44 -2 24 34 A1 A2 Combination 62 = NF..40E 61 71 83 NO NC NC NO 54 NO NO NO NO 24 NC + CA4-01+CA4-01 53 22X NO A1 21 NC 33 NO 43 NO 53 NO A2 NO 14 NC 22 NO 34 NO 44 NO 54 Combination 41 E A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 Combination 42 E A1 13 NO 23 NO 33 NO 43 NO 13X NO 21X NC A2 NO 14 NO 24 NO 34 NO 44 NO 14X NC 22X 43 22X NO NO NO NO NO 14 NC -2 + A1 -1 NO NO NO NO NO NO NO NO 53 61 71 83 NO NC NC NO + 13 43 13 NO 44 Combination 42 = NF..40E 43 -1 + A1 A1 43 52 62 NO NO NO NO NO 21X NC A1 -4 NO NO NO NO NO 21X = 13 NC NC 13 NC 43 NO 13X 13 33 NO NO NO NO 51 61 43 13X A2 23 -3 44 Combination 41 = NF..31E A1 62 72 84 Combination 51 E A1 13 NO 23 NO 33 NO 43 NO 53 61 NO NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO NC 54 62 NC 72 NO 84 44 + CA4-22N Combination 62 E Note: Only NFZ contactor relays with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole ABB | 5/315 1SBC101582S0201 - Rev. A 13 NF add-on auxiliary contacts Terminal marking and positioning 1-pole auxiliary contacts -1 -3 NO NC -4 -2 CA4-01 -5 -7 NO NC CA4-10 -8 -6 CC4-01 CC4-10 2-pole auxiliary contacts 31X 22X / 43X CAL4-11 (Left side-mounted) 31X / NC 32X / 21X NC 43X / NO 44X / 13X 44X 14X / 32X 21X / NO 22X 13X / 14X CAL4-11 (Right side-mounted) 4-pole auxiliary contacts 53 NO 54 61 71 81 NC NC NC 62 72 82 CA4-13N 53 NO 54 63 NO 73 NO 64 83 NO 84 74 CA4-40N 53 NO 54 61 73 NC NO 62 74 83 NO 84 CA4-31N 53 NO 54 61 71 NC NC 62 72 83 NO 84 CA4-22N 51 61 71 81 NC NC NC NC 52 62 72 82 CA4-04N 1SBC101582S0201 - Rev. A 5 5/316 | ABB NF contactor relays 35 mm EN/IEC 60715 35 mm EN/IEC 60715 6 0.24" 80 3.15" 6 0.24" 80 3.15" 5.5 0.22" 35 1.38" ø 4.2 0.17" 5.5 0.22" 5.5 0.22" 10 0.39" 35 1.38" 2x 2x ø 4.2 0.17" M4 8-32 UNC M4 8-32 UNC 70 2.76" 71 2.80" 5.5 0.22" 5 0.20" 77 3.03" 71 2.80" 70 2.76" 77 3.03" 5 0.20" 45 1.77" 60 2.36" 45 1.77" mm, inches 60 2.36" Main dimensions 10 0.39" 5 0.20" NF..22E, NF..31E, NF..40E 5 0.20" NF 5 110.5 4.35" 71 2.80" 45 1.77" 77 3.03" 10 0.39" 12 0.47" 71 2.80" 45 1.77" 5.5 0.22" 35 mm EN/IEC 60715 80 3.15" 6 0.24" 5.5 0.22" 43 1.69" 80 3.15" 35 mm EN/IEC 60715 6 0.24" 5.5 0.22" 5.5 0.22" 10 0.39" NF..22E, NF..31E, NF..40E + CA4, CC4 1-pole auxiliary contact block NF..22E, NF..31E, NF..40E + CAL4-11 2-pole auxiliary contact block 110.5 4.35" 110.5 4.35" 71 2.80" 45 1.77" 10 0.39" 35 1.38" NF..44E, NF..53E, NF..62E, NF..71E, NF..80E, NF..33/11, NF..51/11 NF..22E, NF..31E, NF..40E + CA4 4-pole auxiliary contact block 60 2.36" 5.5 0.22" ø 4.2 0.17" 43 1.69" 5.5 0.22" 35 mm EN/IEC 60715 80 3.15" 6 0.24" 5.5 0.22" 43 1.69" 80 3.15" 35 mm EN/IEC 60715 6 0.24" 5.5 0.22" 2x M4 8-32 70 2.76" 10 0.39" 5 0.20" 133.5 5.26" 71 2.80" 45 1.77" 10 0.39" 1SBC101583S0201 - Rev. B 5.5 0.22" 40.5 1.59" 1.1 0.04" 35 mm EN/IEC 60715 80 3.15" 6 0.24" 5.5 0.22" NF..22E, NF..31E, NF..40E + TEF4 electronic timer Note: Contactor relay lateral distance to grounded component 2 mm 0.08" min. ABB | 5/317 5 0.20" 71 2.80" 45 1.77" Summary_5-8 5 5/318 | ABB Accessories Accessories for AF09 … AF2650 3-pole contactors, AF09 ... AF370 4-pole contactors and NF contactor relays 5/321 Auxiliary contact blocks 5/322 Electronic timers 5/335 Interlocks 5/338 Impulse contact blocks 5/340 Mechanical latching units 5/342 Other accessories 5/344 Additional terminal blocks 5/346 Terminal shrouds 5/347 Connections 5/348 Terminal connecting strips and shorting bars 5/349 Connection accessories for starting solutions 5/350 Connection sets for star-delta starter 5/351 Connection bars 5/352 Mounting plates 5/353 Adapter plates 5/354 Contactor coils, main contact sets and arc chutes 5/355 Accessories for UA, UA..RA, GA75, GAE75, GAF contactors 5/357 Auxiliary contact blocks 5/358 Electronic timers 5/365 Mechanical and electrical interlock units 5/368 CA5, CE5, CAL5 and TEF5 fitting details 5/370 Function markers - Mounting piece 5/371 Surge suppressors for contactor coils 5/372 Interface relays 5/374 Mechanical latching units 5/376 Additional terminal blocks and others accessories 5/378 Terminals for control lead connections 5/379 Contactor coils and main contact sets 5/380 Accessories for EK550, EK1000 4-pole contactors 5/381 Auxiliary contact blocks 5/382 5 Mechanical interlock units, terminal shrouds and connection sets 5/386 5/388 Main contact sets - Arc chutes 5/390 Contactor coils 5/391 Summary_5-8 Surge suppressors for contactor coils ABB | 5/319 Summary_5-9 5 5/320 | ABB Accessories for AF09 … AF2650 3-pole contactors, AF09 ... AF370 4-pole contactors and NF contactor relays Auxiliary contact blocks 5/322 Electronic timers 5/335 Interlocks 5/338 Impulse contact blocks 5/340 Mechanical latching units 5/342 Other accessories 5/344 Additional terminal blocks 5/346 Terminal shrouds 5/347 Connections 5/348 Terminal connecting strips and shorting bars 5/349 Connection accessories for starting solutions 5/350 5/351 Connection bars 5/352 Mounting plates 5/353 Adapter plates 5/354 Contactor coils, main contact sets and arc chutes 5/355 5 Summary_5-9 Connection sets for star-delta starter ABB | 5/321 Auxiliary contact blocks for AF09 ... AF96 contactors and NF contactor relays Description 1SBC100001V0014 The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits for standard industrial environments. Types of auxiliary contact blocks for front mounting: –– CA4 1 or 4-pole block, with instantaneous N.O., N.C. contacts –– CC4 1-pole block, with N.O. leading contact or N.C. lagging contact –– CAT4 2-pole block, with instantaneous N.O. + N.C. contacts and A1 / A2 coil terminal connection on front face. 1SBC100007V0014 CA4-10 Types of auxiliary contact blocks for side mounting: –– CAL4 2-pole block, with instantaneous N.O. + N.C. contacts. For clipping onto the right- and/or left-hand side of the contactors. CAL4-11 The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking. 1SBC100006V0014 5 Select the 4-pole auxiliary contact blocks CA4-..E, CA4-..M, CA4-..U or CA4-..N type, according to the contactor or contactor relay type for compliance with the standard requirements (see "Terminal marking and positioning"). Ordering details (1) For contactors Auxiliary contacts Type Order code Pkg qty 1SBC100002V0014 CAT4-11E Front-mounted instantaneous auxiliary contact blocks AF09 ... AF96 1 0 – – CA4-10 4-pole NF 1 0 – – CA4-10-T 0 1 – – CA4-01 0 1 – – CA4-01-T AF09 ... AF16..-30-10 2 2 – – CA4-22M 3 1 – – CA4-31M 1 3 – – CA4-13M 0 4 – – CA4-04M AF26 ... AF96..-30-00 2 2 – – CA4-22E AF09 ... AF80..-40-00 3 1 – – CA4-31E AF09 ... AF80..-22-00 4 0 – – CA4-40E AF26 ... AF96..-30-00 0 4 – – CA4-04E AF09 ... AF16..-40-00 AF40 ... AF80..-40-00 AF09 ... AF16..-30-01 2 2 – – CA4-22U 3 1 – – CA4-31U 4 0 – – CA4-40U 4-pole NF 2 2 – – CA4-22N 3 1 – – CA4-31N 4 0 – – CA4-40N 1 3 – – CA4-13N NF..40E 0 4 – – CA4-04N 1SBN010110R1010 1SBN010110T1010 1SBN010110R1001 1SBN010110T1001 1SBN010140R1122 1SBN010140R1131 1SBN010140R1113 1SBN010140R1104 1SBN010140R1022 1SBN010140R1031 1SBN010140R1040 1SBN010140R1004 1 10 1 10 1 1 1 1 1 1 1 1 0.014 0.014 0.014 0.014 0.055 0.055 0.055 0.055 0.055 0.055 0.055 0.055 1SBN010140R1322 1SBN010140R1331 1SBN010140R1340 1SBN010140R1222 1SBN010140R1231 1SBN010140R1240 1SBN010140R1213 1SBN010140R1204 1 1 1 1 1 1 1 1 0.055 0.055 0.055 0.055 0.055 0.055 0.055 0.055 Front-mounted auxiliary contact blocks with N.O. leading contact and N.C. lagging contact AF09 ... AF96 – – 1 0 CC4-10 1SBN010111R1010 1 4-pole NF – – 0 1 CC4-01 1SBN010111R1001 1 0.014 0.014 Side-mounted instantaneous auxiliary contact blocks AF09 ... AF96 1 1 – – CAL4-11 NF 1 1 – – CAL4-11-T 1 10 0.040 0.040 Front-mounted instantaneous auxiliary contact and A1/A2 coil terminal blocks AF09 ... AF16..-30-10 1 1 – – CAT4-11M 1SBN010151R1111 AF26 ... AF65..-30-00 1 1 – – CAT4-11E 1SBN010151R1011 AF09 ... AF52..-40-00 AF09 ... AF40..-22-00 1 1 0.040 0.040 AF09 ... AF16..-30-01 1 0.040 1 1 – – CAT4-11U 1SBN010120R1011 1SBN010120T1011 1SBN010151R1311 (1) For each contactor or contactor relay type, refer to "Accessory fitting details" table. Note: CAT4 not suitable for AF..Z contactors with DC control voltage 12…20 V DC. 1SBC101573S0201 - Rev. A kg CA4-22E 5/322 | ABB Weight (1 pce) Auxiliary contact blocks for AF09 ... AF96 contactors and NF contactor relays Technical data Contact utilization characteristics according to IEC Types Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated impulse withstand voltage Uimp. Rated operational voltage Ue max. Conventional thermal current Ith - θ ≤ 40 °C Rated frequency (without derating) Ie / Rated operational current AC-15 24-127 V 50/60 Hz acc. to IEC 60947-5-1 220-240 V 50/60 Hz 400-440 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz Making capacity acc. to IEC 60947-5-1 Breaking capacity acc. to IEC 60947-5-1 Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw θ = 40 °C Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Power dissipation per pole at 6 A Mechanical durability Number of operating cycles Max. switching frequency Max. electrical switching frequency 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC 400 V DC 500 V DC 600 V DC for 1.0 s for 0.1 s AC-15 DC-13 Mechanically linked contacts acc. to annex L of IEC 60947-5-1 Mirror contacts acc. to annex F of IEC 60947-4-1 1-pole CA4, 1-pole CC4, 4-pole CA4, 2-pole CAT4, 2-pole CAL4 IEC 60947-5-1 and EN 60947-5-1 690 V 6 kV 24...690 V 16 A 50/60 Hz 6A 4A 3A 2A 2A 10 x Ie AC-15 10 x Ie AC-15 5 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.27 A / 60 W 0.27 A / 68 W 0.15 A / 60 W 0.13 A / 65 W 0.1 A / 60 W 10 A 100 A 140 A 12 V / 3 mA 10-7 0.1 W 10 millions operating cycles 3600 cycles/h 1200 cycles/h 900 cycles/h Additional N.O. or N.C. auxiliary contacts (CA4, CAL4, CAT4) are mechanically linked contacts Additional N.C. auxiliary contacts (CA4, CAL4, CAT4) are mirror contacts Contact utilization characteristics according to UL / CSA 1-pole CA4, 1-pole CC4, 4-pole CA4, 2-pole CAT4, 2-pole CAL4 UL 508, CSA C22.2 N°14 600 V AC, 600 V DC A600, Q600 10 A 7200 VA 720 VA 2.5 A 69 VA Types Standards Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking Connecting characteristics Types Connection capacity (min. ... max.) Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule L Lugs 1-pole CA4, 1-pole CC4, 4-pole CA4, 2-pole CAT4, 2-pole CAL4 1x 2x 1x 2x 1x 2x L< 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 8 mm 6 AWG 18...14 10 mm 1.2 Nm / 11 lb.in 1SBC101593S0201 - Rev. A 1 or 2 x Connection capacity acc. to UL/CSA Stripping length Tightening torque Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screw terminals All terminals Screwdriver type IP20 Delivered in open position, screws of unused terminals must be tightened M3.5 Flat Ø 5.5 / Pozidriv 2 ABB | 5/323 Auxiliary contact blocks for severe industrial environments for AF09 ... AF96 contactors and NF contactor relays 1SBC101030V0014 Description CE5-10W The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits for severe industrial environments. Types of auxiliary contact blocks for front mounting: –– CE5 1-pole block, instantaneous with N.O. contact or N.C. contact, available in 2 IP degrees -- CE5 D with built-in microswitch IP40, degree of protection (IP20 on terminals) -- CE5 W with built-in microswitch IP67, degree of protection (IP20 on terminals). The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protectedagainst accidental direct contact and bear the corresponding function marking. Ordering details (1) For contactors Auxiliary contacts Type Order code Pkg qty Weight (1 pce) CE5-10D0.1 CE5-01D0.1 CE5-10D2 CE5-01D2 CE5-10W0.1 CE5-01W0.1 CE5-10W2 CE5-01W2 1SBN010015R1010 1SBN010015R1001 1SBN010017R1010 1SBN010017R1001 1SBN010016R1010 1SBN010016R1001 1SBN010018R1010 1SBN010018R1001 1 1 1 1 1 1 1 1 kg 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.020 5 AF09 ... AF96 NF 1 – 1 – 1 – 1 – – 1 – 1 – 1 – 1 – – – – – – – – – – – – – – – – (1) For each contactor type, refer to "Accessory fitting details" table. mm, inches 47 1.85" A 5/324 | ABB 1-pole CE5 on AF09 ... AF16..-30-xx 1 stack AF09, AF16..-40/22-00 NF..E 1-stack AF26 ... AF38..-30-00 AF26, AF38..-40/22-00 AF40 ... AF65-30-00 AF40 ... AF65-40/22-00 AF80 ... AF96-30-00 AF80-40/22-00 A 103.5 mm / 4.07" 112.5 mm / 4.43" 127.5 mm / 5.02" 137 mm / 5.39" 140 mm / 5.51" 142 mm / 5.59" 142 mm / 5.59" 1SBC101905S0201 - Rev. A Main dimensions Auxiliary contact blocks for severe industrial environments Technical data Front mounted 1-pole CE5-..0.1 Types 1-pole CE5-..2 Contact utilization characteristics according to IEC Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated operational voltage Ue max. Conventional thermal current Ith - θ ≤ 40 °C Rated frequency (without derating) Ie / Rated operational current 24-127 V 50/60 Hz acc. to IEC 60947-5-1 Making capacity Breaking capacity Ie / Rated operational current DC-12 acc. to IEC 60947-5-1 IEC 60947-5-1 and EN 60947-5-1 250 V 125 V 0.1 A 50 / 60 Hz AC-14 0.1 A 220-240 V 50/60 Hz – 6 x Ie AC-14 acc. to IEC 60947-5-1 6 x Ie AC-14 acc. to IEC 60947-5-1 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC Short-circuit protection device FF type fuse (1) Minimum switching capacity AF09 … AF38 contactors with failure rate acc. to IEC 60947-5-4 Mechanical durability Number of operating cycles Max. switching frequency Electrical durability Number of operating cycles 0.1 0.1 0.1 0.1 – – 0.1 A A A A A 250 V 2A AC-15 2A 2A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 5 2A 1A 0.3 A 0.2 A 0.2 A 0.1 A 10 A 3 V / 1 mA – 17 V / 1 mA ≤ 10-7 5 millions for CE5-..D0.1 2.5 millions for CE5-..W0.1 3600 cycles/h 5 millions for CE5-..D2 2.5 millions for CE5-..W2 2.5 millions for CE5-..D0.1 0.7 millions for CE5-..W0.1 1 million for CE5-..D2 0.3 millions for CE5-..W2 Max. electrical switching frequency AC-14 AC-15 DC-12 1200 cycles/h 1200 cycles/h 900 cycles/h Contact utilization characteristics according to UL / CSA Standards Max. operational voltage Pilot duty AC thermal rated current UL 508, CSA C22.2 N°14 125 V AC / 110 V DC 250 V AC / 220 V DC 0.1 A 2A Connecting characteristics Flexible with ferrule l L Lugs Connecting capacity acc. to UL / CSA Tightening torque Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screw terminals All terminals Screwdriver type 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 7.7 mm 3.7 mm AWG 18...14 1 Nm Terminals IP20 Microswitches IP40 for CE5-..D0.1 IP40 for CE5-..D2 IP67 for CE5-..W0.1 IP67 for CE5-..W2 Delivered in open position, screws of unused terminals must be tightened M3.5 Flat Ø 5.5 / Pozidriv 2 1x 2x 1x 2x L≤ l> 1 or 2 x 1SBC101906S0201 Connection capacity (min. ... max.) Rigid solid (1) HRC fuses for very fast action (6.3 x 32 mm size). ABB | 5/325 Auxiliary contact blocks for severe industrial environments For AF contactors Main accessory fitting details Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor types Main poles Built-in auxiliary contacts Front-mounted accessories Auxiliary contact blocks 1-pole CE5 Side-mounted accessories Electrical and Auxiliary contact blocks mechanical interlock set 1-pole CA4 (Between 2 contactors) Left side 1-pole CC4 VEM4 2-pole CAL4-11 Right side 3-pole contactors AF09 ... AF38 Max. N.C. built-in and add-on N.C. auxiliary contacts (CA4, CC4, CAL4, VEM4): 2 max. with 1 CE5, none with 2 CE5 on positions 1, 2, 3, 4 3 0 3 0 3 0 0 1 1 0 0 0 1 2 1 1 1 + + + + + 3 2 3 1 2 max. max. max. max. max. – – – – + 1 + 1 – + 1 + 1 + 1 + – – – 1 – Max. N.C. built-in or add-on N.C. auxiliary contacts (CA4, CC4, CAL4, VEM4): 1 max. with 1 CE5 on positions 1 ±30°, 5 AF09 ... AF16 AF09 ... AF16 AF26 ... AF38 3 0 3 0 3 0 0 1 1 0 0 0 1 1 1 + + + 3 max. 3 max. 2 max. – – + 1 – + 1 – – – – Max. add-on N.C. auxiliary contacts (CA4, CC4, CAL4): 4 max. with 1 CE5, 2 max. with 2 CE5 on positions 1, 1 ±30°, 2, 3, 4, 5 AF40 ... AF96 3 0 0 0 2 1 + + – – + 1 + 1 – – – + 1 – + 1 + 1 + 1 2 max. 3 max. + + 1 1 4-pole contactors AF09 ... AF80 Max. add-on N.C. auxiliary contacts (CA4, CC4, CAL4, VEM4): 2 max. with 1 CE5, none with 2 CE5 on positions 1, 2, 3, 4 AF09, AF16 4 0 0 0 2 1 1 1 + + + + 2 3 1 2 max. max. max. max. + – – 1 – Max. add-on N.C. auxiliary contacts (CA4, CC4, CAL4, VEM4): 1 max. with 1 CE5 on positions 1, 2, 3, 4 AF26, AF38 4 0 0 0 AF09, AF16 AF26, AF38 2 2 0 0 1 1 1 + + + 3 max. 2 max. 3 max. – + 1 – + 1 – + 1 – – – – + 1 + 1 – – – – – – Max. add-on N.C. auxiliary contacts (CA4, CC4, CAL4, VEM4): 1 max. with 1 CE5 on positions 1 ±30°, 5 AF09, AF16 4 0 0 0 AF26, AF38 AF09, AF16 AF26, AF38 4 0 2 2 2 2 0 0 0 0 0 0 1 1 + + 3 max. 2 max. No add-on N.C. auxiliary contacts on positions 1 ±30°, 5 1 + 3 max. Max. add-on N.C. auxiliary contacts (CA4, CC4, CAL4): 4 max. with 1 CE5, 2 max. with 2 CE5 on positions 1, 1 ±30°, 2, 3, 4, 5 AF40 ... AF80 4 0 0 0 AF40, AF80 2 2 0 0 2 1 + + 2 max. 3 max. – – + 1 + 1 + + 1 1 No add-on N.C. auxiliary contacts on positions 1, 1 ±30°, 2, 3, 4, 5 1 + 3 max. – – – 1SBC101907S0201 - Rev. A 5 AF09 ... AF16 AF09 ... AF16 AF26 ... AF38 5/326 | ABB Auxiliary contact blocks for severe industrial environments For NF contactor relays Main accessory fitting details Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor relay types Main poles Front-mounted accessories Auxiliary contact blocks 1-pole CE5 Side-mounted accessories Auxiliary contact blocks 1-pole CA4 Left side 1-pole CC4 2-pole CAL4-11 Right side Max. add-on N.C. auxiliary contacts (CA4, CC4, CAL4): 1 max. with 1 CE5 on positions 1, 2, 3, 4 NF 2 2 3 1 E E 1 + NF 4 0 E 2 1 1 + + + 3 max. – + 1 – Max. add-on N.C. auxiliary contacts (CA4, CC4, CAL4): 2 max. with 1 CE5, none with 2 CE5 on positions 1, 2, 3, 4 2 max. 3 max. 1 max. – – – + + – 1 1 + – – 1 5 Max. add-on N.C. auxiliary contacts (CA4, CC4): none with 1 CE5 on positions 1 ±30°, 5 NF 2 2 3 1 E E 1 + NF 4 0 E 1 + 3 max. – – – Max. add-on N.C. auxiliary contacts (CA4, CC4, CAL4): 1 max. with 1 CE5 on positions 1 ±30°, 5 – + 1 – 1SBC101907S0201 - Rev. A 3 max. ABB | 5/327 Auxiliary contact blocks for AF116 ... AF2650 contactors 1SFC101071V0001 Description CAL19-11 The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits for standard industrial environments. Types of auxiliary contact blocks for side mounting: – – CAL 2-pole block, with instantaneous N.O. + N.C. contacts. For clipping onto the right- and/or left-hand side of the contactors. The CAL ...-11B is a second block for mounting in addition to a first CAL ...-11 block, right- and/or lefthand of the AF116 ... AF2650 contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking. Ordering details For contactors Auxiliary Type contacts Order code Pkg qty 5 Weight (1 pce) 1SFC101082V0001 kg CAL18-11 Side-mounted instantaneous auxiliary contact blocks AF116 ... AF370 AF400 ... AF2650 1 1 1 1 1 1 1 1 CAL19-11 CAL19-11B CAL18-11 CAL18-11B 1SFN010820R1011 1SFN010820R3311 1SFN010720R1011 1SFN010720R3311 2 2 2 2 0.040 0.040 0.050 0.050 1SFC101097C0201 (1) For each contactor type, refer to "Accessory fitting details" table. 5/328 | ABB Auxiliary contact blocks for AF116 ... AF2650 contactors Technical data Types CAL18 CAL19 Contact utilization characteristics according to IEC Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated impulse withstand voltage Uimp. Rated operational voltage Ue max. Conventional thermal current Ith - θ ≤ 40 °C Rated frequency (without derating) Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 IEC 60947-5-1 and EN 60947-5-1 690 V 6 kV 24...690 V AC 16 A 50/60 Hz 24-127 V 50/60 Hz 220-240 V 50/60 Hz 380-440 V 50/60 Hz 500-690 V 50/60 Hz Making capacity acc. to IEC 60947-5-1 Breaking capacity acc. to IEC 60947-5-1 Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw θ = 40 °C Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Power dissipation per pole at 6 A Mechanical durability Number of operating cycles Max. switching frequency Max. electrical switching frequency 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC for 1.0 s for 0.1 s AC-15 DC-13 Mechanically linked contacts acc. to annex L of IEC 60947-5-1 Mirror contacts acc. to annex F of IEC 60947-4-1 6A 4A 3A 2A 10 x Ie AC-15 10 x Ie AC-15 5 6 A / 144 W 3 A / 72 W 2.8 A / 134 W 1.5 A / 72 W 1 A / 72 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 60 W 0.55 A / 69 W 0.55 A / 69 W 0.3 A / 66 W 0.3 A / 69 W 0.3 A / 75 W 0.3 A / 75 W 10 A 100 A 140 A 24 V / 50 mA (0.5 million of operating cycles) 24 V / 50 mA ≤ 10-6 0.15 W 3 millions (A/AF400 ... AF750) 0.5 million (AF1250 ... AF2050) 5 millions operating cycles 3600 cycles/h 300 cycles/h 1200 cycles/h 300 cycles/h 900 cycles/h 300 cycles/h N.O. or N.C. auxiliary contacts are mechanically linked contacts N.C. auxiliary contacts are mirror contacts Contact utilization characteristics according to UL / CSA UL 508, CSA C22.2 N°14 600 V AC, 250 V DC A600, Q300 10 A 7200 V A 720 V A 2.5 A 69 V A Standards Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking Connecting characteristics 1x 2x 1x 2x 1x Flexible with non insulated ferrule Flexible with insulated ferrule 2x l L Lugs L≤ l> 1 or 2 x Connection capacity acc. to UL/CSA Stripping length Tightening torque Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screw terminals All terminals Screwdriver type 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 8 mm 3.7 mm AWG18...14 9 mm 1 Nm IP20 Delivered in open position, screws of unused terminals must be tightened M3.5 Flat Ø 5.5 / Pozidriv 2 1SFC101116C0201 Connection capacity (min. ... max.) Solid / stranded ABB | 5/329 Auxiliary contact blocks for AF400 ... AF2650 contactors for severe industrial environments 1SFC101083V0001 Description CEL18 The auxiliary contact blocks are used for the operation of auxiliary and control circuits for severe industrial environments. Types of auxiliary contact blocks for side mounting: –– CEL18 1-pole block, with built-in microswitch IP67 degree of protection (IP20 on terminals). Instantaneous N.O. or N.C. contact. For clipping onto the right- and/or lef-thand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking. Ordering details (1) For contactors Auxiliary contacts Type Order code Pkg qty Weight (1 pce) kg 5 Side-mounting instantaneous auxiliary contact blocks AF400 ... AF2650 1 0 CEL18-10 0 1 CEL18-01 1SFN010716R1010 1SFN010716R1001 1 1 0.050 0.050 1SFC101125C0201 (1) For each contactor type, refer to "Accessory fitting details" table. 5/330 | ABB Auxiliary contact blocks for AF400 ... AF2650 contactors for severe industrial environments Technical data Types CEL18 Contact utilization characteristics according to IEC Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated operational voltage Ue max. Conventional thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-14 acc. to IEC 60947-5-1 Making capacity acc. to IEC 60947-5-1 Breaking capacity acc. to IEC 60947-5-1 Ie / Rated operational current DC-12 acc. to IEC 60947-5-1 Short-circuit protection device Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Mechanical durability Number of operating cycles Max. switching frequency Electrical durability Number of operating cycles Max. switching frequency IEC 60947-5-1 and EN 60947-5-1 250 V 125 V 0.1 A 24-127 V 50/60 Hz 24 V DC 48 V DC 72 V DC 110 V DC 220 V DC 0.1 A 6 x Ie AC-14 6 x Ie AC-14 0.1 0.1 0.1 0.1 – 0.1 A A A A 5 A (FF type fuses) (1) 3 V / 1 mA 1 million 1200 cycles/h 0.7 millions AC-14, AC15 1200 cycles/h DC-12 900 cycles/h Contact utilization characteristics according to UL / CSA UL 508, CSA C22.2 N°14 125 V Standards Max. operational voltage Pilot duty AC thermal rated current 0.1 A Connecting characteristics Connection capacity (min. ... max.) Rigid solid 1...4 mm² 1...4 mm² Flexible with ferrule 0.75...2.5 mm² 0.75...2.5 mm² Lugs 7.7 mm l L 3.7 mm Connection capacity acc. to UL/CSA 1 or 2 x AWG 18...14 Tightening torque 1 Nm Terminals IP20 Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Microswitches IP67 Screw terminals Delivered in open position, screws of unused terminals must be tightened All terminals M3.5 Screwdriver type Flat Ø 5.5 / Pozidriv 2 1x 2x 1x 2x L≤ l> 1SFC101129C0201 (1) or HRC fuses for very fast action (6.3 x 32 mm size). ABB | 5/331 Auxiliary contact blocks for AF09 ... AF96 contactors and NF contactor relays Electrical durability Electrical durability for AC-15 utilization category AC-15 utilization category according to IEC 60947-5-1 / EN 60947-5-1: –– making current: 10 x Ie with cos ϕ = 0.7 and Ue – – breaking current: Ie with cos ϕ = 0.4 and Ue. These curves represent the electrical durability of the built-in or add-on auxiliary contacts in relation to the breaking current. The curves have been drawn for resistive and inductive loads up to 690 V, 40...60 Hz. 30 20 –– AF09 ... AF96 contactor built-in auxiliary contacts –– 1-pole and 4-pole CA4, 2-pole CAT4, 1-pole CC4, 2-pole CAL4 add-on auxiliary contacts. 10 3 2 1 0.5 0.3 0.2 0.1 0.02 0.05 0.1 0.2 0.3 0.5 1 2 3 4 5 6 10 Example: Breaking current = 1 A On the opposite curve at intersection "O" 1 A the corresponding value for the electrical durability is approximately 2 millions operating cycles. Breaking current (A) 30 20 NF contactor relays. (For add on auxiliary contacts see curve above). 10 Million operating cycles 5 3 2 1 0.5 0.3 0.2 0.1 0.02 0.05 0.1 0.2 0.3 0.5 1 2 3 4 5 6 10 Breaking current (A) Electrical durability for DC-13 utilization category DC-13 utilization category according to IEC 60947-5-1 / EN 60947-5-1: making and breaking current Ie and Ue. 100 70 50 6 1.10 cycles 6 3.10 cycles – – AF09 ... AF96 contactor built-in auxiliary contacts 1-pole and 4-pole CA4, 2-pole CAT4, 1-pole CC4, – – 2-pole CAL4 add-on auxiliary contacts, – – NF contactor relays. 20 6 10.10 cycles 10 5 2 1 10 20 24 50 72 100 200 250 Voltage (V) 5/332 | ABB 500 Example: Control of DC electro-magnet: Ue voltage = 72 V DC and breaking power = 70 W. On the opposite curve at intersection "O" 72 V / 70 W the corresponding value for the electrical durability is approximately 2 millions operating cycles. 1SBC101641S0201 - Rev. A Breaking power (W) 5 Million operating cycles 5 Auxiliary contacts for AF116 ... AF2650 contactors Electrical durability Electrical durability for AC-15 utilization category AC-15 utilization category according to IEC 60947-5-1 / EN 60947-5-1: – – making current: 10 x Ie with cos ϕ = 0.7 and Ue – – breaking current: Ie with cos ϕ = 0.4 and Ue. This curves represent the electrical durability of the add-on auxiliary contacts, in relation to the breaking current. The curves have been drawn for resistive and inductive loads up to 690 V, 40...60 Hz. 30 20 –– –– 10 2.7 Example: Breaking current = 1.2 A On the opposite curve at intersection "O" 1.2 A the corresponding value for the electrical durability is approximately 2.7 millions operating cycles. 3 2 1 0.5 0.3 0.2 0.1 0.02 0.05 0.1 0.2 0.3 0.5 1 2 3 4 5 6 1.2 Breaking current (A) 5 10 1SFC101117C0201 Million operating cycles 5 AF116 ... AF2650 contactors auxiliary contacts 2-pole CAL18 and CAL19 add-on auxiliary contacts ABB | 5/333 Add-on auxiliary contacts Terminal marking and positioning 1-pole auxiliary contacts -1 -5 -3 NO NC -2 -8 -6 -4 CA4-01 -7 NO NC CA4-10 CC4-01 CC4-10 2-pole auxiliary contacts 54X / 13X 21X 31X CAL18-11, CAL19-11 (Right-side mounted) 83X 44X / 61X / 71X / NC NO 62X / -2 -4 CAT4-11U 83X / NO NC 72X / 71X 53X / -1 NC CAL18-11B, CAL19-11B (Left-side mounted) 61X 32X 32X / 44X 43X CAL18-11, CAL19-11 (Left-side mounted) 22 CAT4-11E NO NC -3 NO 84X / 53X 22X 22X / 43X / 14X 14X / 31X / NC 21 NC 14 CAT4-11M 84X 21X / NO 34 22 CAL4-11 (Right-side mounted) 13 NO 72X 43X 13X / 44X / 33 NO 62X 31X 32X / CAL4-11 (Left-side mounted) 21 NC NO 21X 22X / 43X / NC 54X NC 13X 44X 14X / 31X / 32X 21X / NO 22X 13X / 14X CAL18-11B, CAL19-11B (Right-side mounted) 4-pole auxiliary contacts 13 NO 14 23 NO 33 NO 24 43 NO 34 44 CA4-40E 13 NO 14 21 NC 22 33 NO 34 13 14 21 31 NC NC 22 32 31 41 NC NC NC 22 32 42 53 NO 54 CA4-13M 43 NO 44 CA4-31E NO 21 21 NC 22 33 NO 34 43 NO 44 43 44 CA4-22E 21 31 NC NC 22 32 43 NO 44 53 NO 54 53 NO 54 4 3 NO 4 3 NO 4 1 NC 3 2 3 NO 4 21 31 41 21 31 41 51 NC NC NC NC NC NC NC NC 12 22 32 42 22 32 42 52 53 NO 4 54 61 71 81 NC NC NC 62 72 82 CA4-13N NO 4 3 NO 53 NO 4 54 73 63 NO NO 64 84 74 1 1 NC 2 2 3 NO 4 53 NO 54 61 73 NC NO 62 74 83 NO 84 CA4-31N 53 NO 54 61 71 NC NC 62 72 83 NO 84 CA4-22N 51 61 71 NC NC NC NC 52 62 72 82 CA4-04N 5/334 | ABB 83 NO CA4-40N NC CA4-22U 11 CA4-04M 3 NO CA4-31U CA4-22M CA4-04E 4 3 NO CA4-40U CA4-31M NO 3 NO 81 1SBC101660S0201 - Rev. A 5 Electronic timers 1sbc100004V0014 Description TEF4-ON TEF4 frontal electronic timers are used for realizing timing function and are available in ON-delay and OFFdelay versions. Compact solution in cabinet compared to separate timers TEF4 electronic timers are front-mounted and locked on AF contactors or NF contactor relays. A mechanical indicator allows to show the state of the contactor. Safe and cost-reduced wiring TEF4 electronic timers are supplied by a direct plug-in parallel connection to the coil terminals A1 - A2 of the contactor or contactor relay. A varistor is integrated on the timer to offer a built-in protection against surges in the contactor coil. Available for a wide control voltage range 24...240 V AC/DC TEF4-ON or TEF4-OFF allow time-delayed functions up to 100 s in 3 distinct time ranges, independently of the control system. The time delay ranges are selected by a switch and the time delay can be adjusted by means of a rotary switch. The timing function is activated by closing or opening the device on which the timer is mounted. The OFF-delay version operates without additional control supply. 5 TEF4-OFF For contactors, contactor relays Time delay range Delay type selected by switch Rated control circuit voltage Uc Auxiliary Type contacts Order code Pkg (1 pce) 24...240 1 1 TEF4-ON 1SBN020112R1000 kg 0.065 OFF-delay 24...240 1 1 TEF4-OFF 1SBN020114R1000 0.065 V 50/60 Hz or DC AF09 ... AF96 NF 0.1...1 s 1...10 s 10...100 s Weight ON-delay 1SBC101669S0201 - Rev. A 1SBC100012V0014 Ordering details ABB | 5/335 Electronic timers Technical data Contact utilization characteristics according to IEC Types Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated impulse withstand voltage Uimp Rated operational voltage Ue max. Rated frequency (without derating) Conventional thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 24-127 V 50/60 Hz 220-240 V 50/60 Hz Making capacity acc. to IEC 60947-5-1 Breaking capacity acc. to IEC 60947-5-1 Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw θ = 40 °C Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Power dissipation per pole at 3 A Function diagram TEF4-OFF 3 A 1.5 A 10 x Ie AC-15 10 x Ie AC-15 1 A / 24 W 6 A for 1.0 s 8 A for 0.1 s 8 A 12 V / 3 mA 24 V DC 10-7 0.1 W ON-delay 24 V DC OFF-delay 150 ms min. Uc (A1 - A2) 1s min. Uc (A1 - A2) 100 ms min. 100 ms min. N.O. (67 - 68) N.O. (67 - 68) N.C. (55 - 56) N.C. (55 - 56) t t Bistable relay inside. Before use, once apply Uc then switch it off in order to initialize position of the contacts. Control circuit voltage AC control voltage 50/60 Hz DC control voltage Rated control circuit voltage Uc Average consumption Rated control circuit voltage Uc Average consumption Rated frequency limits Supply voltage range Overvoltage protection Time delay range (t) selected by switch 24...240 V AC 1.5 mA RMS 24...240 V DC 1.5 mA 50 / 60 Hz 0.85...1.1 x Uc (at θ ≤ 70 °C) Varistor included 1 mA 0.1...1 s 1...10 s 10...100 s On-load reiteration accuracy under constant conditions Minimum ON period Recovery time Ambient air temperature Operation Storage Climatic withstand Maximum operating altitude Mounting positions Shock withstand acc. to IEC 60068-2-27 and EN 60068-2-27 (Mounting position 1) Vibration withstand acc. to IEC 60068-2-6 Mechanical durability Number of operating cycles Max. switching frequency Max. electrical switching frequency ≤1% 0.1 s 1 s 0.15 s 0.1 s -25 °C ... +70 °C -40 °C ... +80 °C Category B according to IEC 60947-1 Annex Q 2000 m Mounting positions 1, 1 +/- 30°, 2, 3, 4, 5 1/2 sinusoidal shock for 11 ms: no change in contact position Same as contactor or contactor relay 5...300 Hz 3 g closed position / 2 g open position 5 millions operating cycles 3600 cycles/h AC-15 DC-13 5/336 | ABB 1 mA RMS 1200 cycles/h 900 cycles/h 1800 cycles/h 1SBC101670S0201 - Rev. A 5 TEF4-ON IEC 60947-5-1 and EN 60947-5-1 400 V 4 kV 240 V 50 / 60 Hz 5 A Electronic timers Technical data Contact utilization characteristics according to UL / CSA Types Standards Rated insulation voltage Ui acc. to UL / CSA Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking TEF4-ON UL 508, CSA C22.2 N°14 300 V 240 V B300, R300 5A 3600 VA 360 VA 1A 28 VA TEF4-OFF Connecting characteristics Flexible with non insulated ferrule Flexible with insulated ferrule l L Lugs 1x 2x 1x 2x 1x 2x L≤ l> 1 or 2 x Connection capacity acc. to UL / CSA Stripping length Tightening torque Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screw terminals All terminals Screwdriver type Terminal Marking 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 8 mm 3.7 mm AWG 18...14 10 mm 1.2 N.m / 11 lb.in 5 IP20 Delivered in open position, screws of unused terminals should be tightened M3.5 Flat Ø 5.5 / Pozidriv 2 A1 55 NC 67 NO KM1 A2 A1 55 NC 67 NO 56 NC 68 NO KM1 56 NC 68 NO A2 1SBC101670S0201 - Rev. A Connection capacity (min. ... max.) Rigid solid ABB | 5/337 1SBC100010V0014 Interlocks Mechanical interlock units Description The VM mechanical interlock units are designed for the interlocking of two AF contactors. When mounted between two contactors, the VM mechanical interlock unit prevents one of the contactors from closing as long as the other contactor is closed. The mechanical interlock units VM4 and VM96-4 include 2 fixing clips (BB4). VM4 Ordering details For contactors Type Order code Mechanical interlock units for two contactors mounted side by side AF09 ... AF38..-30-.. VM4 1SBN030105T1000 AF09 ... AF38..-40-00 AF40 ... AF96-30-.. VM96-4 1SBN033405T1000 AF40 ... AF80-40-00 For same size contactors: VM19 1SFN030300R1000 AF116 ... AF146 AF190, AF205 AF265 ... AF370 VM140/190 1SFN034403R1000 AF116 ... AF146 and AF190, AF205 AF190, AF205 and VM205/265 1SFN035203R1000 AF265 ... AF370 AF400 ... AF1250 PN.. mounting plate to be ordered VM750H 1SFN035700R1000 separately AF1350 ... AF2650 Plate included VM1650H 1SFN036503R1000 1SFC101035V0014 5 Mounting VM19 Mechanical interlock units for two contactors mounted one above the other AF400 ... AF1250 Additional plate (not supplied) VM750V 1SFN035701R1000 Pkg qty Weight (1 pce) kg 10 0.005 10 0.006 1 0.054 1 0.088 1 0.090 1 0.200 1 6.000 1 0.200 Mechanical and electrical interlock sets 1SBC100011V0014 Description VEM4 Ordering details 01NC For contactors KM1 Auxiliary Type contacts Order code Pkg qty KM2 A2 1SBC100013V0014 VEM4 BB4 5/338 | ABB Weight (1 pce) kg A2 Mechanical and electrical interlock set For same size contactors: AF09 ... AF16..-30-.. AF26 ... AF38..-30-00 AF09, AF16..-40-00 AF26, AF38..-40-00 Fixing clips AF09 ... AF96 0 2 VEM4 1SBN030111R1000 1 0.035 BB4 1SBN110120W1000 50 0.002 Note: VEM4 not suitable for AF..Z contactors with DC control voltage 12...20 V DC. 1SBC101595S0201 - Rev. A 01 NC VEM4 mechanical and electrical interlock set for the interlocking of two AF contactors. VEM4 set includes a mechanical interlock unit VM4 with 2 fixing clips (BB4) and a VE4 electrical interlock block with A2-A2 connection. Fixing the electrical interlock block to the contactor front face connects the 2 built-in N.C. interlocking contacts with the two coils. VE4 block must be used with A2-A2 connection to respect the electrical connection diagram. Interlocks Technical data Mechanical interlock unit Types Mechanical durability Number of operating cycles Max. mechanical switching frequency VM4, VM96 5 millions operating cycles 1800 cycles/h VM19 ... VM750 1 million operating cycles 300 cycles/h VM1650H 500 000 operating cycles Mechanical and electrical interlock set Contact utilization characteristics according to IEC Types Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated impulse withstand voltage Uimp. Rated control circuit voltage Uc VEM4 IEC 60947-5-1 and EN 60947-5-1 690 V 6 kV AC 50/60 Hz control voltage DC control voltage Conventional thermal current Ith - θ ≤ 40 °C Mechanical durability Number of operating cycles Max. mechanical switching frequency Electrical durability Max. electrical switching frequency 5 24...500 V AC 20...500 V DC 16 A 5 millions operating cycles 1800 cycles/h 1200 cycles/h Contact utilization characteristics according to UL / CSA Types Standards Max. operational voltage VEM4 UL 508, CSA C22.2 N°14 500 V AC, 500 V DC Connecting characteristics Types Connection capacity (min. ... max.) Rigid solid Flexible with ferrule Flexible with insulated ferrule L Lugs VEM4 1x 2x 1x 2x 1x 2x L< 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 8 mm 6 AWG 18...14 10 mm 1.2 Nm / 11 lb.in IP20 Delivered in open position, screws of unused terminals must be tightened M3.5 Flat Ø 5.5 / Pozidriv 2 1SBC101594S0201 - Rev. A 1 or 2 x Connection capacity acc. to UL / CSA Stripping length Tightening torque Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screw terminals All terminals Screwdriver type ABB | 5/339 Impulse contact blocks 1SBC100039V0014 Description CB5 Impulse contact blocks are designed for use in enclosures, in association with an adjustable mechanical pushbutton. Two types are available: –– CB5-10: N.O. contact with a black actuator ("ON" function) –– CB5-01: N.C. contact with a light grey actuator ("OFF" function). These blocks are equipped with 2 connecting leads 0.5 mm2 with end, approximately 18 cm long. Mounting: Clipped onto the front face of the contactors. Ordering details For contactors Contacts Type Order code Pkg qty Weight (1 pce) kg 5 AF09 ... AF38 1 – – 1 CB5-10 CB5-01 1SBN010013R1010 1SBN010013R1001 1 1 0.012 0.012 Note: For AF40 ... AF96 mounting: please consult us. 22.9 0.90" 10 0.39" 9.8 0.39" CB5-10 5/340 | ABB 21.6 0.85" 36 1.42" 36 1.42" 9.8 0.39" mm, inches CB5-01 5 0.2" 1SBC101655S0201 - Rev. B Main dimensions Notes N9 5 ABB | 5/341 Mechanical latching units 1SBC100040V0014 Description WB75-A E1 E2 E2676D 5 Terminal marking For converting standard contactors into latched contactors. The WB75-A block contains a mechanical latching device with electromagnetic impulse unlatching (AC or DC) or manual unlatching. Captive screw type connecting terminals, built-in cable clamps, M3.5 (+,-) pozidriv 2 screw with screwdriver guidance; delivered untightened and protected against accidental direct c ontact. Operation After closing, the contactor continues to be held in the closed position by the latching mechanism should the supply voltage fail at the contactor coil terminals. Contactor opening can be controlled: – – electrically by an impulse (AC or DC) on the WB75-A block coil. (the coil is not designed to be permanently energized) –– manually by pressing the pushbutton on the front face of the WB75-A block. Mounting The WB75-A block is clipped onto the front face of the 1-stack contactor where it takes up two slots (see dimension drawing). The two other slots do not accept CA4 single pole auxiliary contacts. Up to 2 CAL4-11 auxiliary contact blocks can be side-mounted on contactors (except NF22E and AF..-22-00, refer to main accessory fitting details table in main accessories section). Ordering details For contactors AF09 ... AF65 NF Rated control circuit voltage Uc V 50 Hz or DC V 60 Hz 24 24...28 42 42...48 48 48...55 110 110...127 220...230 220...255 230...240 230...277 380...415 380...440 415...440 440...480 Type Order code Pkg qty Weight (1 pce) WB75-A WB75-A WB75-A WB75-A WB75-A WB75-A WB75-A WB75-A FPTN372726R1001 FPTN372726R1002 FPTN372726R1003 FPTN372726R1004 FPTN372726R1006 FPTN372726R1005 FPTN372726R1007 FPTN372726R1008 1 1 1 1 1 1 1 1 kg 0.120 0.120 0.120 0.120 0.120 0.120 0.120 0.120 1SBC101634S0201 - Rev. B Note: For WB75-A produced since week 06-2012. WB75-A can not be used on AF80, AF96. 5/342 | ABB Mechanical latching units Technical data Type WB75-A Utilization characteristics according to IEC Rated insulation voltage Ui acc. to IEC 60947-1 Max. electrical impulse time On AC coil (with load factor 5 %) On DC coil (with load factor 3 %) Min. electrical impulse time For latching (energizing of the contactor coil) For pull-out (energizing of the WB block coil) Coil operating limits AC control voltage 50/60 Hz Rated control circuit voltage Uc Coil consumption DC control voltage Rated control circuit voltage Uc Coil consumption 690 V 20 s 8s AC DC AC DC AC or DC supply 120 ms 120 ms 30 ms 50 ms 0.85…1.1 x Uc Average pull-in value Average holding value 24…480 V AC 90 VA 60 VA Average pull-in value Average holding value 24…440 V DC 110 W 110 W 5 Operating time On contactor closing (latching) Between coil energization and: N.O. contact closing N.C. contact opening No difference with the operation of a contactor without mechanical latching unit No difference with the operation of a contactor without mechanical latching unit N.O. contact opening N.C. contact closing 5…25 ms 7…28 ms On contactor opening (unlatching) Between WB coil energization and: Mechanical durability Number of operating cycles Max. switching frequency 1 million operating cycles 3600 cycles/h with on-load factor of 8 % Connecting characteristics Flexible with ferrule l L Lugs Tightening torque Recommended Max. Screw terminals All terminals Screwdriver type 1x 2x 1x 2x L< l> 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 8 mm 3.5 mm 1 Nm 1.2 Nm Delivered in open position, screws of unused terminals must be tightened M3.5 Flat Ø 5.5 / Pozidriv 2 1SBC101676S0201 - Rev. A Connection capacity (min. ... max.) Rigid solid ABB | 5/343 1SBC100020V0014 Other accessories Ordering details For contactors Type Order code Pkg qty 1SBC100021V0014 LDC4 BX4 Additional coil terminal blocks Additional coil terminal blocks for a bottom access to the coil terminals of contactors or contactor relays. AF09 ... AF96, NF LDC4 1SBN070156T1000 10 0.010 Protective covers 1SBC100023V0014 Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact. AF09 ... AF96 1-stack contactors and NF contactor relays 4-pole CA4, 2-pole CAT4 auxiliary contact blocks and TEF4 electronic timer BX4-CA BX4 BX4-CA 1SBN110108T1000 1SBN110109W1000 10 50 0.006 0.001 1SNC160101F0014 Note: BX4 produced since 13045 (day 045 - year 2013) are suitable for AF40 ... AF96. BA4 1SBC100044V0014 BA5-50 Function markers AF09 ... AF370 Box of 16 blank cards (16 markers by card) printable on HTP500 thermal transfer printer and AMS 500 marking table to identify your contactors, overload relays or manual motor starters. Marker dimensions: 7 x 20 mm (.276" x .787"). AF09 ... AF370 contactors, TF thermal overload relays, EF electronic overload relays and MS116, MS132 manual motor starters AMS 500 support plate for 8 BA4 HTP500 support plate BA4 1SNA235156R2700 16 0.011 SPRC 1 HTP500-BA4 1SNA360010R1500 1SNA235712R2400 1 1 0.220 0.290 Function markers AF400 ... AF2650 Set of 50 function markers designed to be clipped onto the front face of devices. Details can be added to these markers using a ball point pen, indelible felt-tip pen or pentel white. Self-adhesive labels (not supplied) can also be added to them. Marker dimensions: 7 x 19 mm (.276" x .748"). AF400 ... AF2650 and accessories Main dimensions BA5-50 1SBN110000R1000 1 0.017 mm, inches 44.8 1.76" BX4 5/344 | ABB 1SBC101733S0201 6 0.24" 28 1.10" 5 Weight (1 pce) kg 1SBC100022V0014 Other accessories Ordering details For contactors Type Order code Pkg qty Weight (1 pce) kg 10 10 10 0.003 0.004 0.005 BP38-4 Mounting pieces 1SBC100041V0014 Mounting piece for replacing installed contactors fixed by screws by AF contactors. BDT4 For AF09 ... AF65, NF From contactor A26 ... A40, AL26 ... AL40 A40 ... A75, AE50 ... AE75, AF50 ... AF75 A95, A110, AE95, AE110, AF95, AF110 To contactor AF09 ... AF38 AF40 ... AF65 AF80 ... AF96 BP38-4 BP65-4 BP96-4 1SBN112303T1000 1SBN113403T1000 1SBN113903T1000 Test block 5 BDT4 test block is suitable for switching on contactor off-load. 1SBC100042V0014 Marking on the block indicates the contactor type to fit with. AF09 ... AF96, NF BDT4 1SBN110122T1000 10 0.007 BDT4 For AF80 ... AF96 Main dimensions mm, inches 78 3.07" 13 0.51" 60 2.36" 10 0.39" 4.6 0.18" M6 1/4-20 UNC 5 0.20" ø 6.2 0.24" 5 0.20" 5 0.20" 54 2.13" BP38-4 M6 1/4-20 UNC 90 3.54" 70 2.76" BP65-4 BP96-4 ABB | 5/345 1SBC101752S0201 4.6 0.18" 126 4.96" 136 5.35" 147.7 5.81" 90 3.54" 100 3.94" 119.5 4.70" ø 6.2 0.24" ø 4.2 0.17" M4 8-32 UNC 5 0.20" 70 2.76" 80 3.15" 90 3.54" 45 1.77" 1SBC100038V0014 Additional terminal blocks Description The LD terminal block is designed to increase the connecting capacity of 3-pole AF26 ... AF38 contactors on which it is fitted and for preparation of the wiring before final connection to the contactor. LD38-4 blocks are 3-pole terminal blocks with tunnel terminals. LD38-4 Ordering details 5 For contactors Type Order code Pkg qty Weight (1 pce) AF26 ... AF38 LD38-4 1SBN072308R1000 2 kg 0.070 Technical data Types Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Main terminals LD38-4 690 V 600 V Screw terminals with double connector 2 x (7 width x 5.8/9.2 depth) Connection capacity (min. ... max.) Rigid Solid (≤ 4 mm²) Stranded (≥ 6 mm²) Flexible with non insulated ferrule Flexible with insulated ferrule Connection capacity acc. to UL / CSA 1x 2.5...25 mm² 1x 2.5...25 mm² + 1x 2.5...16mm² 1x 2.5...16 mm² 1x 2.5...16mm² + 1x 2.5...10mm² 1x 2.5...16mm² 1x 2.5...16mm² + 1x 2.5...10mm² 1x AWG 8-4 2x AWG 8-6 14 mm 2.5 Nm / 22 lb.in Stripping length Tightening torque Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 IP20 Screw terminals Delivered in closed position, screws of unused terminals must be tightened Main terminals M5 Screwdriver type Flat Ø 6.5 / Pozidriv 2 Note: The utilization of LD38-4 additional terminal blocks does not allow the use of BER and BEY connection sets. Main dimensions mm, inches 102 4.02" 5/346 | ABB 1SBC101734S0201 125 4.92" 30 1.18" Terminal shrouds Description 1SFC101038V0001 Main terminal protection for AF116 ... AF1250 contactors. The auxiliary contact blocks and coils are designed to provide an IP 20 degree of protection. The main terminals, equipped with compression lugs or cable clamps, can be protected against accidental direct contact after wiring (EN 50274) by the addition of terminal shrouds (see table below). Ordering details LT140-30L 1SFC101041V0001 For contactors 1SFC101089V0001 LT370-30C 4-pole contactors AF116 … AF140, with compression lugs AF190 … AF205, with cable clamps AF190 … AF205, with compression lugs AF265 … AF370, with cable clamps AF265 … AF370, with compression lugs Order code Pkg qty Weight (1 pce) kg LT140-30L LT205-30C LT205-30L LT205-30Y 1SFN124203R1000 1SFN124801R1000 1SFN124803R1000 1SFN124804R1000 2 2 2 1 0.070 0.050 0.220 0.050 LT370-30C LT370-30L LT370-30Y 1SFN125401R1000 1SFN125403R1000 1SFN125404R1000 2 2 1 0.035 0.280 0.075 LT370-30D 1SFN125406R1000 1 0.15 LT460-AC LT460-AL LT750-AC LT750-AL 1SFN125701R1000 1SFN125703R1000 1SFN126101R1000 1SFN126103R1000 2 2 2 2 0.100 0.800 0.120 0.825 LT140-40L LT205-40C LT205-40L LT370-40C LT370-40L 1SFN124203R2000 1SFN124801R2000 1SFN124803R2000 1SFN125401R2000 1SFN125403R2000 2 2 2 2 2 0.090 0.060 0.290 0.040 0.370 5 1SFC101199V0001 LT460-AC 3-pole contactors AF116 ... AF146, with compression lugs AF190, AF205, with cable clamps AF190, AF205, with compression lugs AF190, AF205, with shorting bar or between contactor and TOL/EOL in DOL starters AF265 ... AF370, with cable clamps AF265 ... AF370, with compression lugs AF265 ... AF370, with shorting bar or between contactor and TOL/EOL in DOL starters AF265 ... AF370, for use with extending cable clamps, ATK300/2 and OZXB4 AF400, AF460 with cable clamps AF400, AF460 with compression lugs AF580, AF750 with cable clamps AF580, AF1250 with compression lugs Type 1SFC101099C0201 - Rev. A LT205-40 ABB | 5/347 Connections 1SFC101050V0001 Terminal enlargements Description Enlargement pieces designed to increase the width of the contactor terminal pads in order to allow larger connections to be mounted. Ordering details LW140 For contactors 3-pole contactors AF116 ... AF146 AF190, AF205 AF265 ... AF370 AF400, AF460 AF580, AF750 AF1250 4-pole contactors AF190 … AF205 AF265 … AF370 5 LW205-40 Dimensions Type Order code Pkg qty Weight (1 pce) hole Ø mm bar mm 6.5 10.5 10.5 10.5 13 13 13 x 3 17.5 x 5 20 x 5 25 x 5 40 x 6 50 x 10 LW140 LW205 LW370 LW460 LW750 LW1250 1SFN074207R1000 1SFN074807R1000 1SFN075407R1000 1SFN075707R1000 1SFN076107R1000 1SFN076407R1000 1 1 1 1 1 1 0.115 0.260 0.340 0.730 1.230 2.000 10.5 10.5 20 x 5 25 x 5 LW205-40 LW370-40 1SFN074807R2000 1SFN075407R2000 1 1 0.306 0.540 kg Terminal extension Description Extension pieces designed to extend the main terminals of contactors for combined mounting of contactors and connection sets. 1SFC101049V0001 Ordering details For 3-pole contactors Dimensions AF116 ... AF146 AF190, AF205 AF265 ... AF370 AF400, AF460 AF580, AF750 hole Ø mm 6.5 8.5 10.5 10.5 13 bar mm 13 x3 17.5 x 5 20 x 5 25 x 5 40 x 6 Type Order code Pkg qty Weight (1 pce) LX140 LX205 LX370 LX460 LX750 1SFN074210R1000 1SFN074810R1000 1SFN075410R1000 1SFN075710R1000 1SFN076110R1000 1 1 1 1 1 kg 0.072 0.180 0.234 0.500 0.850 Connection sockets LX140 Description Connection socket can be used to replace built-in cable clamps in AF116 ... AF146. Ordering details 1SFC101073V0001 For contactor LL146-30 3-pole contactors AF116 ... AF146 4-pole contactors AF116 … AF140 AF190 … AF205 AF265 … AF370 Type Order code Pkg qty Weight (1 pce) kg LL146-30 1SFN074211R1000 6 0.102 LL146-40 LL205-40 LL370-40 1SFN074211R2000 1SFN074811R2000 1SFN075411R2000 8 2 2 0.132 0.216 0.224 Pkg Weight qty (1 pce) kg Connection module Description Connection module can be fixed on AF116 ... AF146 delivered with bar terminals. 1SFC101046V0001 For contactor LD146-30 5/348 | ABB 3-pole contactors AF116 ... AF146 4-pole contactors AF116 … AF140 Type Order code LD146-30 1SFN074208R1000 2 0.165 LD146-40 1SFN074208R2000 2 0.225 1SFC101100C0201 Rev. A Ordering details 1SBC100024V0014 Terminal connecting strips and shorting bars Description 1SFC101088V0001 LY16-4 LY185 Parallel and series connection of 3-pole contactors: –– To obtain a star point (3 parallel-connected poles) –– To connect poles in parallel and thus increase the AC load passing through the flow path made up of the parallel-connected poles: LP, LY, LH, LF, LG. The relevant cable cross-sectional area may limit the maximum permissible current. Consult information in table below –– To connect poles in series and thus increase the DC load controlled by the poles: LP, LY (only LY16-4 and LY38-4 secable strips). Types LP LY for connection of "n" poles n=2 n = 2 (secable LY16-4, LY38-4 connecting strips) n=3 n=2 n=3 n=4 LH LF LG with terminal no no no yes yes yes insulated no (1) yes yes (1) no yes yes 5 1SBC100035V0014 (1) LP460 ... LP750, LY185 ... LY750 not insulated. Use terminal shrouds. Ordering details For contactors LG16-4 Cable Type crosssectional area mm² 6 10 – – – – – – – – – 10 10 16 25 25 16 25 25 35 50 25 25 25 Order code Pkg qty Weight (1 pce) LY16-4 1SBN071303T1000 10 kg 0.006 LY38-4 LY140 LY185 LY300 LY460 LY750 LP185 LP300 LP460 LP750 LH38-4 1SBN072303T1000 1SFN074203R1000 1SFN074703R1000 1SFN075103R1000 1SFN075703R1000 1SFN076103R1000 1SFN074712R1000 1SFN075112R1000 1SFN075712R1000 1SFN076112R1000 1SBN072304R1000 10 1 1 1 1 1 2 2 2 2 2 0.012 0.055 0.200 0.300 0.450 0.800 0.300 0.400 0.550 0.950 0.012 LF16-4 1SBN071305R1000 2 0.020 LF38-4 1SBN072305R1000 2 0.040 LG16-4 1SBN071306R1000 2 0.025 C mm 22 16 23 31 23 inch 0.87" 0.63" 0.91" 1.22" 0.91" Main dimensions Type LH38-4 C LF16-4 LF38-4 LG16-4 For contactors Dimensions AF09 AF26 AF09 AF26 AF09 A mm 111.20 114 121 135.20 124.20 ... ... ... ... ... AF16 AF38 AF16 AF38 AF16 inch 4.38" 4.49" 4.76" 5.32" 4.89" B mm 83 86 87 103 87 inch 3.27" 3.39" 3.43" 4.06" 3.43" 1SBC101735S0201 1SBC100036V0014 LF16-4 max. nominal continuous current with "n" poles in parallel in series 2 poles 3 poles 4 poles 2 poles A AF09 30 33 – 25 AF12 32 36 – 27 AF16 34 40 – 30 AF26 50 60 – 45 AF116 … AF146 – 240 – AF190, AF205 – 400 – AF265 … AF370 – 670 – AF400, AF460 – 1000 – AF580, AF750 – 1650 – AF190, AF205 300 – – AF265 … AF370 475 – – AF400, AF460 725 – – AF580, AF750 1200 – – AF09 45 – – AF12 50 – – AF16 54 – – AF26 81 – – AF30, AF38 90 – – AF09 62 – AF12 70 – AF16 75 – AF26 112 – AF30, AF38 125 – AF09 – – 70 – AF12 – – 78 – AF16 – – 84 – A 1SBC100037V0014 LH38-4 B ABB | 5/349 Connection accessories for starting solutions 1SBC100014V0014 Connecting links with manual motor starters Description The BEA insulated 3-pole connecting links are used to connect AF09 ... AF38 contactors with the MS116 or MS132 manual motor starters. The BEA insulated 3-pole connecting links ensure the electrical and mechanical connection between the contactor and the associated manual motor starter. BEA16-4 1SBC100016V0014 Ordering details 5 For 3-pole contactors Manual motor starter Type Order code Pkg qty AF09 ... AF16 MS116-0.16 … MS116-25, MS132-0.16… MS132-25 MS116-0.16 … MS116-16, MS132-0.16 ... MS132-10 MS116-20 … MS116-32, MS132-12 ... MS132-32 BEA16-4 1SBN081306T1000 10 Weight (1 pce) kg 0.025 BEA26-4 1SBN082306T1000 10 0.025 BEA38-4 1SBN082306T2000 10 0.030 AF26 ... AF38 BER16-4 Connection sets for reversing contactors Description A1 A2 1 3 5 1 3 5 2 4 6 2 4 6 The BER and BEM connection sets are used to connect the main poles of two 3-pole contactors mounted side by side. The BER connection sets are made up of 1 upstream and 1 downstream connections. The BEM connection sets are made up of 3 upstream and 3 downstream connections. BER and BEM connection sets are insulated and made of solid copper bars. A1 A2 Ordering details 1SFC101052V0001 BER, BEM Reversing connections BEP140-30 For 3-pole contactors Type Order code Pkg qty AF09 ... AF16 AF26 ... AF38 AF40 ... AF65 AF80, AF96 AF116 ... AF146 AF190, AF205 AF265 ... AF370 AF400, AF460 AF580, AF750 BER16-4 BER38-4 BER65-4 BER96-4 BER140-4 BER205-4 BER370-4 BEM460-30 BEM750-30 1SBN081311R1000 1SBN082311R1000 1SBN083411R1000 1SBN083911R1000 1SFN084211R1000 1SFN084811R1000 1SFN085411R1000 1SFN085701R1000 1SFN086101R1000 1 1 1 1 1 1 1 1 1 Weight (1 pce) kg 0.045 0.100 0.175 0.250 0.615 1.237 2.140 4.400 7.300 Phase to phase connections Description A1 A2 1 3 5 1 3 5 2 4 6 2 4 6 The BEP and BES connection sets are used to connect phase to phase the main poles of two contactors mounted side by side. 4-pole contactors will then operate as source reversing contactors. The BEP connection sets are made up of 1 upstream or downstream connections. The BES connection sets are made up of 3 upstream or downstream connections. BEP and BES connection sets are insulated and made of solid copper bars. A1 A2 A1 3 5 7 1 3 5 7 2 4 6 8 2 4 6 8 A1 A2 E0743D A2 1 BEP 4-pole changeover connections 5/350 | ABB For contactors Type Order code Pkg qty Weight (1 pce) kg 3-pole contactors AF116 … AF146 AF190, AF205 AF265 … AF370 AF400, AF460 AF580, AF750 BEP140-30 BEP205-30 BEP370-30 BES460 BES750 1SFN084214R1000 1SFN084814R1000 1SFN085414R1000 1SFN085704R1000 1SFN086104R1000 1 1 1 1 1 0.320 0.534 0.926 2.200 3.700 4-pole contactors AF116 ... AF140 AF190 ... AF205 AF265 ... AF370 BEP140-40 BEP205-40 BEP370-40 1SFN084214R2000 1SFN084814R2000 1SFN085414R2000 1 1 1 0.420 0.710 1.230 1SBC101736S0201 Rev. A Ordering details BEP, BES 3-pole phase to phase connections Connection sets for star-delta starter 1SBC100018V0014 Description BEY16-4 The BEY and BED connection sets are used to connect the main poles of the Line, Delta and Star contactors of a star-delta starter. The connection sets are made up of: –– Line contactor / delta contactor: -- BEY: upstream phase-to-phase connection -- BED: upstream connection in parallel –– Delta contactor / star contactor: downstream connection in parallel –– Star contactor: star point upstream –– Insulated, solid copper bar. Ordering details A2 1 3 5 2 4 6 A1 A2 1 3 5 2 4 6 A1 A2 1 3 5 2 4 6 AF09 ... AF370 Line-delta-star connection A1 A2 1 3 5 2 4 6 A1 A2 1 3 5 2 4 6 A1 A2 1 3 5 2 4 6 AF400 ... AF750 Star-delta-line connection Interlock unit between delta & star contactors Type Order code Pkg qty AF09 ... AF16 AF26 ... AF38 AF40 ... AF65 AF80, AF96 AF116 ... AF146 AF190 ... AF205 (line and delta) AF140 ... AF146 (star) AF190, AF205 AF265 ... AF370 (line and delta) AF190 ... AF205 (star) AF265 ... AF370 AF400 ... AF460 AF580 ... AF750 (line and delta) AF400 ... AF460 (star) AF580 ... AF750 With or without VM4 or VEM4 With or without VM4 or VEM4 With or without VM96-4 With or without VM96-4 With or without VM19 With or without VM140/190 BEY16-4 BEY38-4 BEY65-4 BEY96-4 BEY140-4 BEY190-4 1SBN081313R2000 1SBN082713R2000 1SBN083413R2000 1SBN083913R2000 1SFN084413R1000 1SFN084813R1000 1 1 1 1 1 1 Weight (1 pce) kg 0.050 0.110 0.200 0.250 1.040 1.154 With or without VM19 With or without VM205/265 BEY205-4 BEY265-4 1SFN085213R1000 1SFN085413R1000 1 1 1.205 2.020 With or without VM19 With or without VM750H With or without VM750H BEY370-4 BED460 BED580 1SFN085813R1000 1SFN085703R1000 1SFN085903R1000 1 1 1 2.110 4.700 6.300 With or without VM750H BED750 1SFN086103R1000 1 7.700 5 1SBC101737S0201 A1 For 3-pole line, delta & star contactors ABB | 5/351 Connection bars 1SFC101061V0001 Connection bars between contactors and MCCB Description Connection between contactors/starters and moulded case circuit breakers. These connection sets are solid copper bars. Ordering details BEA140/XT2 1SFC101064V0001 For 3-pole contactors BEA205/T4 1SFC101065V0001 5 BEA370/T5 MCCB Type Order code Pkg qty Weight (1 pce) kg Vertical assembly AF116 ... AF146 AF116 ... AF146 AF190, AF205 AF190, AF205 AF265 ... AF370 AF400 ... AF750 AF400 ... AF750 XT2 XT4 XT4 T4 T5 BEA140/XT2 BEA140/XT4 BEA205/XT4 BEA205/T4 BEA370/T5 1SFN084206R1000 1SFN084206R1001 1SFN084806R1000 1SFN084806R1001 1SFN085406R1000 1 1 1 1 1 T6 T5 BEA750/T6 BEA750/T5 1SFN086106R1000 1SFN086106R1001 1 1 0.058 0.068 0.200 0.190 0.350 0.410 0.410 Vertical assembly with control wire terminals (also suitable when using busbar kits for starter combinations) AF400 ... AF750 T5 BEA750D/T5 1SFN086106R1003 1 0.720 AF400 ... AF750 T6 BEA750D/T6 1SFN086106R1002 1 0.720 Horizontal assembly (also suitable when using busbar kits for starter combinations) AF400, AF460 T4 BEA460H/T4 1SFN085907R1000 1 2.450 Pkg qty Weight (1 pce) Connection bars between contactors and switch fuse Description Connection between contactors/starters and moulded case circuit breakers. These connection sets are solid copper bars. Ordering details For 3-pole contactors Switch fuse Type Order code kg Vertical assembly AF400, AF460 AF460 ... AF750 OESA400 OESA630 to OESA800 Horizontal assembly AF400, AF460 OESA400...LR BEF460/OESA400 BEF750/OESA800 1SFN085708R1000 1SFN086108R1000 1 1 0.340 0.740 OESA460H/OESA400 1SFN085709R1000 1 1.250 1SFC101103C0201 Rev. A Note: The BEF connection bars provided for the A145 ... A300 contactors can be used for the AF145 ... AF300 contactors. 5/352 | ABB Mounting plates Description 1SFC101087V0001 Mounting plates with fixing holes for the specified 3-pole contactors and overload relays. Ordering details For 3-pole contactors For overload relays Type Order code Pkg qty Weight (1 pce) kg PN460 Mounting plates for Direct on line starters E500DU AF400, AF460 E800DU AF580, AF750 For two contactors side by side with space for mechanical interlock For one or two overload relays PN460-11 PN750-11 1SFN095705R1000 1SFN096105R1000 1 1 2.120 2.500 Type Order code Pkg qty Weight (1 pce) 5 kg Mounting plates for mechanical interlocked contactors, reversing starters and two speed starters for double windings E500DU PN460-21 1SFN095701R1000 1 3.490 AF400, AF460 E800DU PN750-21 1SFN096101R1000 1 4.230 AF580, AF750 For main and delta contactors For star contactor (1) For overload relays Type Order code Pkg qty Weight (1 pce) kg Mounting plates for star-delta starters and two speed starters for single windings AF400, AF460 A300, AF400 E500DU PN460-41 1SFN095703R1000 AF580, AF750 AF400 ... AF580 E800DU PN750-41 1SFN096103R1000 1 1 5.310 6.320 1SFC101106C0201 (1) Space for mechanical interlock included. ABB | 5/353 Adapter plates Description 1SFC101048V0001 Adapter plates with fixing holes for replacing installed contactors. Ordering details From contactors To contactor Type Order code Pkg qty Weight (1 pce) A95, AF95, A110, AF110 EH150, EH160, EH175, EH210, EG160 EH250, EH260, EH300 EH370, EH550, EG315 EH700, EH800 OKYM150, OKYM175 OKYM200, OKYM250 OKYM315 OKYM400 OKYM500 EH550, EG630, OKYM630 AF116, AF140, AF146 AF190, AF205 AF265, AF305, AF370 AF400, AF460, AF580 AF750 AF190 AF265, AF305, AF370 AF400, AF460 AF400, AF460 AF580 AF580, AF750 PR146-1 PR210-1 PR300-1 PR460-1 PR750-1 PR185-2 PR300-2 PR400-2 PR460-2 PR580-2 PR750-2 1SFN094200R1000 1SFN094900R1000 1SFN095300R1000 1SFN095700R1000 1SFN096100R1000 1SFN095100R1001 1SFN095300R1001 1SFN095700R1002 1SFN095700R1001 1SFN096100R1002 1SFN096100R1001 1 1 1 1 1 1 1 1 1 1 1 kg 0.300 0.440 0.560 0.900 0.500 0.500 0.500 0.820 0.800 0.700 1.100 PR146-1 5 l Dimensions (mm) h E2119D L Type of the plate Dimensions PR146-1 PR210-1 PR300-1 PR460-1 PR750-1 PR185-2 PR300-2 PR400-2 PR460-2 PR580-2 PR750-2 L 150 200 200 278 283 202 202 278 278 283 283 Fixing holes I 90 132 172 198 244 152 152 151 176 176 255 h 15 11.5 11.5 11.5 11.5 11.2 11.2 11.5 11.5 11.5 11.5 mm 4 x ø 6.5 4xø7 4xø7 4xø7 4xø7 4 x ø 11 4 x ø 11 4 x ø 11 4 x ø 11 4 x ø 11 4 x ø 14 1SFC101107C0201 Fixing holes according to the plate types 5/354 | ABB Contactor coils, main contact sets and arc chutes Contactor coils 1SFC101007F0201 Ordering details For contactors ZAF1650 AF1350 ... AF2050 Rated control circuit voltage Uc min. ... Uc max. V 50/60 Hz V DC 24…60 48…130 48…130 100…250 100…250 250…500 250…500 24…60 48…130 48…130 100…250 100…250 250…500 250…500 100…250 100…250 AF2650 100...250 AF400, AF460 AF580 ... AF1250 100...250 Type Order code Pkg qty Weight (1 pce) ZAF460 ZAF460 ZAF460 ZAF460 ZAF750 ZAF750 ZAF750 ZAF750 ZAF1650 (1) ZP1650 (2) ZAF2650 (1) ZP2650 (2) 1SFN155770R6806 1SFN155770R6906 1SFN155770R7006 1SFN155770R7106 1SFN156170R6806 1SFN156170R6906 1SFN156170R7006 1SFN156170R7106 1SFN156570R7026 1SFN166521R1070 1SFN156670R7026 1SFN166621R1070 1 1 1 1 1 1 1 1 1 set 1 1 set 1 kg 0.525 0.525 0.525 0.525 1.335 1.335 1.335 1.335 0.900 0.300 0.900 0.300 5 (1) One set of two coil. (2) Printed circuit board. Main contact sets The contact sets for 3-pole contactors consists of six fixed contacts, three moving contacts, springs and the required screws. Ordering details For 3-pole contactors Type Order code Pkg qty AF400 AF460 AF580 AF750 AF1250 AF1350 AF1650 AF2050 AF2650 ZL400 ZL460 ZL580 ZL750 ZL1250 ZL1350 ZL1650 ZL2050 ZL2650 1SFN165703R1000 1SFN165903R1000 1SFN166103R1000 1SFN166303R1000 1SFN166403R1000 1SFN166503R1000 1SFN166703R1000 1SFN167003R1000 1SFN166603R1000 1 1 1 1 1 1 1 1 1 For contactors Type Order code Pkg qty AF400, AF460 AF580, AF750, AF1250 AF1350, AF1650, AF2050 AF2650 ZW460 ZW750 ZW1650 ZW2650 1SFN165710R1000 1SFN166110R1000 1SFN166510R1000 1SFN166610R1000 1 1 1 1 ZL1650 Weight (1 pce) kg 1.320 1.320 1.840 1.840 1.840 2.500 3.500 3.500 1.200 Arc chutes Ordering details Weight (1 pce) kg 1.380 1.500 4.000 4.000 1SFC101137C0201 Rev. A 1SFC101009F0201 Description ABB | 5/355 Summary_5-10 5 5/356 | ABB Accessories for UA, UA..RA contactors and GA75, GAE75, GAF contactors Auxiliary contact blocks 5/358 Electronic timers 5/365 Mechanical and electrical interlock units 5/368 CA5, CE5, CAL5 and TEF5 fitting details 5/370 Function markers - Mounting piece 5/371 Surge suppressors for contactor coils 5/372 Interface relays 5/374 Mechanical latching units 5/376 Additional terminal blocks and others accessories 5/378 Terminals for control lead connections 5/379 Contactor coils and main contact sets 5/380 Summary_5-10 5 ABB | 5/357 Auxiliary contact blocks 1SBC580992F0301 Description 1SBC573794F0302 CA5-10 5 The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits for standard industrial environments. Types of auxiliary contact blocks for front mounting: –– CA5 1 or 4-pole block, instantaneous with N.O., N.C. contacts –– CC5 1-pole block, with N.O. leading contact or N.C. lagging contact. Select the 4-pole auxiliary contact blocks CA5 type, according to the contactor type for compliance with the standard requirements (see "Terminal Marking and Positioning"). Types of auxiliary contact blocks for side mounting: –– CAL 2-pole block instantaneous N.O. + N.C. contacts. For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking. Ordering details (1) CA5-40E For contactors Auxiliary contacts Type Order code Pkg qty Weight (1 pce) 1SBC573752F0301 kg 1SFC101033F0201 CAL5-11 1SBN010010R1010 1SBN010010R1001 1SBN010011R1010 1SBN010011R1001 10 10 10 10 0.014 0.014 0.014 0.014 Front-mounted instantaneous auxiliary contact blocks, 4-pole UA16 ... UA30 2 2 – – CA5-22M 3 1 – – CA5-31M 1 3 – – CA5-13M 0 4 – – CA5-04M 1 1 1 1 CA5-11/11M UA50 ... UA110 2 2 – – CA5-22E 3 1 – – CA5-31E 4 0 – – CA5-40E 0 4 – – CA5-04E 1 1 1 1 CA5-11/11E 1SBN010040R1122 1SBN010040R1131 1SBN010040R1113 1SBN010040R1104 1SBN010040R1118 1SBN010040R1022 1SBN010040R1031 1SBN010040R1040 1SBN010040R1004 1SBN010040R1018 2 2 2 2 2 2 2 2 2 2 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 Side-mounted instantaneous auxiliary contact blocks, 2-pole 1 1 – – CAL5-11 UA16 ... UA75 UA95, UA110 1 1 – – CAL18-11 1SBN010020R1011 1SFN010720R1011 2 2 0.050 0.050 (1) For each contactor type, refer to "Accessory fitting details" table. Note: –– The front-mounted auxiliary contact blocks provided for the UA75 contactors can be used with the GA and GAE types –– The CAL auxiliary contact blocks can be used with GA contactors: GA75-10-00: 2 x CAL5-11 blocks GA75-10-11: 1 x CAL5-11 block GAE75-10-00: 1 x CAL5-11 block GAE75-10-11: no add-on block. –– The CAL auxiliary contact blocks can be used with UA..RA contactors. See "Accessory fitting details" for this contactor type. 1SBC101520S0201 - Rev. B CAL18-11 Front-mounted instantaneous auxiliary contact blocks, 1-pole UA16 ... UA110 1 0 – – CA5-10 0 1 – – CA5-01 – – 1 0 CC5-10 – – 0 1 CC5-01 5/358 | ABB Auxiliary contact blocks Technical data Types Front mounted Side mounted 1-pole CA5, 1-pole CC5, 4-pole CA5 CAL5-11 CAL18-11, CAL18-11B Contact utilization characteristics according to IEC IEC 60947-5-1 and EN 60947-5-1 690 V 24...690 V AC 16 A Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated operational voltage Ue max. Conventional thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 24-127 V 50/60 Hz 220-240 V 50/60 Hz 380-440 V 50/60 Hz 500-690 V 50/60 Hz acc. to IEC 60947-5-1 Making capacity acc. to IEC 60947-5-1 Breaking capacity acc. to IEC 60947-5-1 Ie / Rated operational current DC-13 5 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.3 A / 66 W 0.3 A / 75 W 10 A for 1.0 s 100 A for 0.1 s 140 A 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw θ = 40 °C Minimum switching capacity A40 … A75 contactors with failure rate acc. to IEC 60947-5-4 A95 … A110 contactors with failure rate acc. to IEC 60947-5-4 Power dissipation per pole at 6 A Mechanical durability Number of operating cycles Electrical durability 6A 4A 3A 2A 10 x Ie AC-15 10 x Ie AC-15 Max. switching frequency Number of operating cycles Max. switching frequency 17 V / 1 mA ≤ 10-7 24 V / 50 mA – 0.1 W 10 millions (UA16 … UA75) 3 millions (UA95 … UA110) – – 10 millions – – 24 V / 50 mA (0.5 million of operating cycles) ≤ 10-6 0.15 W 5 millions (UA95 ... UA110) 3 millions (GAF185 ... GAF750) 0.5 million (GAF1250 ... GAF2050) 3600 cycles/h see "Electrical durability" curves AC-15 1200 cycles/h DC-13 900 cycles/h Contact utilization characteristics according to UL / CSA UL 508, CSA C22.2 N°14 600 V AC, 250 V DC A600, Q300 10 A Standards Max. operational voltage Pilot duty AC thermal rated current Connecting characteristics Connection capacity (min. ... max.) Rigid solid Flexible with ferrule l L Lugs Tightening torque Degree of protection 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 7.7 mm 3.7 mm 1 Nm Terminals IP20 1x 2x 1x 2x L≤ l> 8 mm 3.7 mm acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Delivered in open position, screws of unused terminals must be tightened M3.5 Flat Ø 5.5 / Pozidriv 2 1SBC101522S0201 - Rev. B Screw terminals All terminals Screwdriver type ABB | 5/359 Auxiliary contact blocks for severe industrial environments Description 1SBC581011F0301 The auxiliary contact blocks are used for the operation of auxiliary and control circuits for severe industrial environments. CE5-01W Types of auxiliary contact blocks for front mounting: –– CE5 1-pole block, instantaneous with N.O. contact or N.C. contact, designed in 2 protection versions: -- CE5-.. D with built-in microswitch IP40, degree of protection (IP20 on terminals) -- CE5-.. W with built-in microswitch IP67, degree of protection (IP20 on terminals). Types of auxiliary contact blocks for side mounting: –– CEL18 1-pole block with built-in microswitch IP67 degree of protection (IP20 on terminals). Instantaneous N.O. or N.C. contact. For clipping onto the right- and/or left-hand side of the contactors. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact and bear the corresponding function marking. 5 Ordering details (1) For contactors Auxiliary contacts Type Order code Pkg qty Weight (1 pce) kg Front-mounting instantaneous auxiliary contact blocks, 1-pole UA16 ... UA75 1 – – – CE5-10D0.1 – 1 – – CE5-01D0.1 1 – – – CE5-10D2 – 1 – – CE5-01D2 1 – – – CE5-10W0.1 – 1 – – CE5-01W0.1 1 – – – CE5-10W2 – 1 – – CE5-01W2 1SBN010015R1010 1SBN010015R1001 1SBN010017R1010 1SBN010017R1001 1SBN010016R1010 1SBN010016R1001 1SBN010018R1010 1SBN010018R1001 1 1 1 1 1 1 1 1 0.020 0.020 0.020 0.020 0.020 0.020 0.020 0.020 Side-mounting instantaneous auxiliary contact blocks, 1-pole microswitch auxiliary contact N.O. or N.C. UA95, UA110 1 0 – – CEL18-10 1SFN010716R1010 1 0.050 UA95, UA110 0 1 – – CEL18-01 1SFN010716R1001 1 0.050 1SBC101577S0201 - Rev. B (1) For each contactor type, refer to "Accessory fitting details" table. Note: The front-mounted auxiliary contact blocks provided for the UA contactors can be used with the GA and GAE types. The side-mounted auxiliary contact blocks provided for the UA95, UA110 contactors can be used with the GAF types. 5/360 | ABB Auxiliary contact blocks Technical data Front-mounted 1-pole CE5-..0.1 Types Side-mounted 1-pole CE5-..2 CEL18-10, CEL18-01 Contact utilization characteristics according to IEC Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated operational voltage Ue max. Conventional thermal current Ith - θ ≤ 40 °C Ie / Rated operational current 24-127 V 50/60 Hz 220-240 V 50/60 Hz acc. to IEC 60947-5-1 Making capacity acc. to IEC 60947-5-1 Breaking capacity acc. to IEC 60947-5-1 Ie / Rated operational current 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC acc. to IEC 60947-5-1 Short-circuit protection device Minimum switching capacity A40 … A75 contactors With failure rate acc. to IEC 60947-5-4 A95 … A110 contactors With failure rate acc. to IEC 60947-5-4 Mechanical durability Number of operating cycles Electrical durability Max. switching frequency Number of operating cycles Max. switching frequency IEC 60947-5-1 and EN 60947-5-1 250 V 125 V 250 V 0.1 A 2A AC-14 AC-15 0.1 A 2A – 2A 6 x Ie AC-14 10 x Ie AC-15 6 x Ie AC-14 10 x Ie AC-15 DC-12 0.1 A 2A 0.1 A 1A 0.1 A 0.3 A 0.1 A 0.2 A – 0.2 A – 0.1 A 0.1 A (FF type fuses) (1) 10 A (FF type fuses) (1) 3 V / 1 mA – 3 V / 1 mA – 5 millions for CE5-..D0.1 2.5 millions for CE5-..W0.1 3600 cycles/h 2.5 millions for CE5-..D0.1 0.7 millions for CE5-..W0.1 AC-14, 1200 cycles/h AC-15 DC-12 17 V / 1 mA ≤ 10-7 17 V / 1 mA ≤ 10-7 5 millions for CE5-..D2 2.5 millions for CE5-..W2 1 million for CE5-..D2 0.3 millions for CE5-..W2 125 V 0.1 A AC-14 0.1 A – 6 x Ie AC-14 6 x Ie AC-14 0.1 0.1 0.1 0.1 – – 0.1 A A A A 5 A (FF type fuses) (1) 3 V / 1 mA – – – 1 million – 1200 cycles/h 0.7 millions 900 cycles/h Contact utilization characteristics according to UL / CSA Standards Max. operational voltage Pilot duty AC thermal rated current UL 508, CSA C22.2 N°14 125 V AC / 110 V DC 250 V AC / 220 V DC 125 V 0.1 A 2 A 0.1 A Connecting characteristics Connection capacity (min. ... max.) Rigid solid Flexible with ferrule l L Bars or lugs Connection capacity acc. to UL/CSA Tightening torque Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screw terminals All terminals Screwdriver type 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 7.7 mm 3.7 mm 1 or 2 x AWG 18...14 1 Nm Terminals IP20 Microswitches IP40 for CE5-..D0.1 IP40 for CE5-..D2 IP67 IP67 for CE5-..W0.1 IP67 for CE5-..W2 Delivered in open position, screws of unused terminals must be tightened M3.5 Flat Ø 5.5 / Pozidriv 2 1x 2x 1x 2x L≤ l> 1SBC101584S0201 (1) or HRC fuses for very fast action (6.3 x 32 mm size). ABB | 5/361 Auxiliary contacts Electrical durability Electrical durability for AC-15 utilization category AC-15 utilization category according to IEC 60947-5-1 / EN 60947-5-1: –– making current: 10 x Ie with cos ϕ = 0.7 and Ue – – breaking current: Ie with cos ϕ = 0.4 and Ue. These curves represent the electrical durability of the built-in or add-on auxiliary contacts, in relation to the breaking current. The curves have been drawn for resistive and inductive loads up to 690 V, 40...60 Hz. 30 20 –– 1-pole and 4-pole CA5, 1-pole CC5, 2-pole CAL5 and CAL18 add-on auxiliary contacts. 10 3 Example: Breaking current = 1.2 A On the opposite curve at intersection "O" 1.2 A the corresponding value for the electrical durability is approximately 2.7.106 operating cycles. 2 1 0.5 0.3 0.2 0.1 0.02 0.05 0.1 0.2 0.3 0.5 1 2 3 4 5 6 1.2 Breaking current (A) 10 Electrical durability for DC-13 utilization category DC-13 utilization category according to IEC 60947-5-1 / EN 60947-5-1: making and breaking current = Ie with Ue value. 100 70 50 6 1.10 cycles –– 1-pole and 4-pole CA5, 1-pole CC5, 2-pole CAL5 and CAL18 add-on auxiliary contacts. 6 Breaking power (W) 3.10 cycles 20 6 10.10 cycles 10 5 2 1 10 20 24 50 72 100 200 250 Example: Control of DC electro-magnet: Ue voltage = 72 V DC and breaking power = 70 W. On the opposite curve at intersection "O" 72 V / 70 W the corresponding value for the electrical durability is approximately 2.106 operating cycles. 500 Voltage (V) 1SBC101588S0201 - Rev. A 5 Million operating cycles 5 2.7 5/362 | ABB Add-on auxiliary contacts Terminal marking and positioning 1-pole auxiliary contacts -3 -1 -1 NC NO NC -2 -3 NO -4 -4 -2 CE5-01, CEL18-01 CA5-10 CA5-01 -5 CE5-10, CEL18-10 -7 NO NC -8 -6 CC5-10 CC5-01 5 2-pole auxiliary contacts 32X / NO 44X / 21X 31X 22X / 43X / NC 13X 32X 44X 43X 14X / 31X / NC 22X 21X / NO 14X 13X / CAL5-11, CAL18-11 (Left-side mounted) CAL5-11, CAL18-11 (Right-side mounted) 17X / 35X / 36X / 48X / 25X 35X 26X / 48X 47X CCL5-11 (Left-side mounted) NO NC 17X 36X 18X / 47X / 26X NC 18X 25X / NO CCL5-11 (Right-side mounted) 4-pole auxiliary contacts 11 21 31 41 21 31 41 51 NC NC NC NC NC NC NC NC 12 22 32 42 22 32 42 52 CA5-04M CA5-04E 14 21 31 NC NC 22 32 43 NO 44 CA5-22E 13 NO 14 21 NC 22 13 14 23 NO 24 33 NO 34 43 NO 44 13 14 NC 22 32 43 NO 53 NO 54 44 21 NC 22 33 NO 34 43 53 NO NO 44 54 CA5-31M 33 NO 34 43 NO 44 CA5-40E NO 31 NC CA5-22M CA5-31E NO 21 21 31 41 NC NC NC 22 32 42 53 NO 54 1SBC101586S0201 - Rev. A 13 NO CA5-13M 21 35 NC NC 22 36 CA5-11/11E 47 NO 48 21 NC 22 33 NO 34 45 NC 57 NO 46 58 CA5-11/11M ABB | 5/363 Notes N11 5 5/364 | ABB Electronic timers TEF5-OFF TEF5 frontal electronic timers are used for realizing timing function and are available in ON-delay and OFFdelay versions. Compact solution in cabinet compared to separate timers TEF5 electronic timers are front-mounted and locked on contactors. A mechanical indicator allows to show the state of the contactor. TEF5 electronic timers are supplied by direct wiring to the coil terminals A1 - A2 of the contactor or contactor relay. A varistor is integrated on the timer to offer a built-in protection against surges in the contactor coil. Available for a wide control voltage range 24...240 V AC/DC TEF5-ON or TEF5-OFF allow time-delayed functions up to 100 s in 3 distinct time ranges, independently of the control system. The time delay ranges are selected by a switch and the time delay can be adjusted by means of a rotary switch. The timing function is activated by closing or opening the device on which the timer is mounted. The OFF-delay version operates without additional control supply. 5 Ordering details For contactors, contactor relays Time delay range Delay type selected by switch Rated control circuit voltage Uc Auxiliary Type contacts Order code Pkg (1 pce) 24...240 1 1 TEF5-ON 1SBN020312R1000 kg 0.065 OFF-delay 24...240 1 1 TEF5-OFF 1SBN020314R1000 0.065 V 50/60 Hz or DC UA16 ... UA75 GA75, GAE75 0.1...1 s 1...10 s 10...100 s Weight ON-delay 1SBC101675S0201 - Rev. B 1SBC101396F0014 Description ABB | 5/365 Electronic timers Technical data Contact utilization characteristics according to IEC Types Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated impulse withstand voltage Uimp Rated operational voltage Ue max. Rated frequency (without derating) Conventional thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 24-127 V 50/60 Hz acc. to IEC 60947-5-1 220-240 V 50/60 Hz TEF5-OFF 400 V 4 kV 240 V 50 / 60 Hz 5 A 3 A 1.5 A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 1 A / 24 W 6 A for 1.0 s 8 A for 0.1 s 8 A 12 V / 3 mA 24 V DC 10-7 0.1 W ON-delay 24 V DC OFF-delay 150 ms min. Uc (A1 - A2) 1s min. Uc (A1 - A2) 100 ms min. N.O. (67 - 68) 100 ms min. N.O. (67 - 68) N.C. (55 - 56) N.C. (55 - 56) t t Bistable relay inside. Before use, once apply Uc then switch it off in order to initialize position of the contacts. Control circuit voltage AC control voltage 50/60 Hz DC control voltage Rated control circuit voltage Uc Average consumption Rated control circuit voltage Uc Average consumption Rated frequency limits Supply voltage range Overvoltage protection Time delay range (t) selected by switch 24...240 V AC 1.5 mA RMS 24...240 V DC 1.5 mA 50 / 60 Hz 0.85...1.1 x Uc (at θ ≤ 70 °C) Varistor included 1 mA RMS 1 mA 0.1...1 s 1...10 s 10...100 s On-load reiteration accuracy under constant conditions Minimum ON period Recovery time Ambient air temperature Operation Storage Climatic withstand Maximum operating altitude Mounting positions Shock withstand acc. to IEC 60068-2-27 and EN 60068-2-27 (Mounting position 1) Mechanical durability Number of operating cycles Max. switching frequency Max. electrical switching frequency AC-15 DC-13 ≤1% 0.1 s 1 s 0.15 s 0.1 s -25 °C ... +70 °C -40 °C ... +80 °C Category B according to IEC 60947-1 Annex Q 2000 m Acc. to mounting positions permitted on contactors or contactor relays 1/2 sinusoidal shock for 11 ms: no change in contact position Same as contactor or contactor relay 5 millions operating cycles 3600 cycles/h 1800 cycles/h 1200 cycles/h 900 cycles/h 1SBC101674S0201 5 Making capacity Breaking capacity Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw θ = 40 °C Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Power dissipation per pole at 3 A Function diagram TEF5-ON IEC 60947-5-1 and EN 60947-5-1 5/366 | ABB Electronic timers Technical data Contact utilization characteristics according to UL / CSA Types Standards Rated insulation voltage Ui acc. to UL / CSA Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking TEF5-ON UL 508, CSA C22.2 N°14 TEF5-OFF 300 V 240 V B300, R300 5A 3600 VA 360 VA 1A 28 VA Connecting characteristics Connection capacity (min. ... max.) Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule l L Lugs 1x 2x 1x 2x 1x 2x L≤ l> 1 or 2 x 5 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 8 mm 3.7 mm AWG 18...14 10 mm 1 N.m / 9 lb.in Connection capacity acc. to UL / CSA Stripping length Tightening torque Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 IP20 Screw terminals Delivered in open position, screws of unused terminals should be tightened All terminals M3.5 Screwdriver type Flat Ø 5.5 / Pozidriv 2 Terminal Marking 55 NC 67 NO 55 NC 67 NO A1 A1 A2 KM1 56 NC 68 NO A2 56 NC 68 NO 1SBC101674S0201 KM1 ABB | 5/367 Mechanical and electrical interlock units 1SBC101429F0014 Description When mounted between two contactors, the mechanical interlock unit prevents one of the contactors from closing as long as the other contactor is closed. VE interlock units are used for mechanical and electrical interlocking of two AC or DC operated contactors mounted side by side. Ordering details VE5-2 For contactors Mounting Type Order code Mechanical and electrical interlock units for two horizontal mounted contactors GA75, GAE75 Rail mounting VE5-2 1SBN030210R1000 Pkg qty Weight (1 pce) kg 1 0.146 1SBC101525S0201 - Rev. B 5 5/368 | ABB Mechanical and electrical interlock units Technical data Types VE5-2 Contact utilization characteristics according to IEC Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated operational voltage Ue max. Conventional thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 Making capacity acc. to IEC 60947-5-1 Breaking capacity acc. to IEC 60947-5-1 Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 Short-circuit protection device - gG type fuse Rated short-time withstand current Icw θ = 40 °C Power dissipation per pole at 6 A Mechanical durability Number of operating cycles Max. switching frequency IEC 60947-5-1 and EN 60947-5-1 690 V 24...690 V 16 A 24-127 V 50/60 Hz 220-240 V 50/60 Hz 380-440 V 50/60 Hz 500-690 V 50/60 Hz 6A 4A 3A 2A 10 x Ie AC-15 10 x Ie AC-15 5 6A 2.8 A 1A 0.55 A 0.3 A 10 A for 1.0 s 100 A for 0.1 s 140 A 0.15 W 24 V DC 48 V DC 72 V DC 125 V DC 250 V DC 5 millions operating cycles 600 cycles/h Utilization characteristics according to UL/CSA UL 508, CSA C22.2 N°14 600 V Standards Max. operational voltage Connecting characteristics Flexible with ferrule l L Lugs Tightening torque Recommended Max. Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screw terminals All terminals Screwdriver type Terminal marking 1x 2x 1x 2x L< l> 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 8 mm 3.5 mm 1 Nm 1.2 Nm IP20 delivered in open position, screws of unused terminals must be tightened M3.5 Flat Ø 5.5 / Pozidriv 2 01 01 NC NC 02 02 E0085D1 Connection capacity (min. ... max.) Rigid solid 1SBC101331S0201 - Rev. B Technical note: when, during switching, the arc time is estimated to more than 40 ms, the closing signal of one of the two contactors must be delayed with respect to the opening signal of the other contactor in order to prevent a short-circuit. Use a TEF5 electronic timer according to application use with time lapse for GA75, GAE75 contators. ABB | 5/369 CA5, CE5, CAL, CEL18 and TEF5 fitting details Many configurations are possible depending on whether these are front-mounted or side-mounted. Contactor types Main poles Built-in auxiliary contacts Front-mounted accessories Auxiliary contact blocks Electronic timer 1-pole CA5 2-pole CAL 1-pole CE5 UA contactors UA16 ... UA26 UA30 UA50 ... UA75 3 0 3 0 3 0 3 0 UA95, UA110 3 0 3 0 1 0 0 0 1 1 0 0 1 1 UA..RA contactors UA16-30-10RA 3 0 UA26-30-10RA 3 0 UA30-30-10RA 3 0 1 0 1 0 1 0 UA50-30-00RA UA63-30-00RA UA75-30-00RA UA95-30-00RA UA110-30-00RA 0 0 0 0 0 3 3 3 3 3 0 0 0 0 0 GA75, GAE75 contactors GA75 1 0 1 0 GAE75 1 0 1 0 0 0 0 0 0 0 0 1 1 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 to to to to to to to to to to to to 4 2 5 3 6 5 6 5 6 5 6 5 x x x x x x x x x x x x CA5 CE5 max. CA5 CE5 max. CA5 CE5 max. CA5 CE5 max. CA5 CE5 max. CA5 CE5 max. (1) (1) (2) (2) (2) (2) – 4-pole CA5 TEF5 1-pole CEL18 or 1 x 4-pole CA5 or 1 x TEF5 + 1 to 2 x CAL5-11 – + 1 to 2 x CAL5-11 – + 1 to 2 x CAL5-11 – + 1 x CAL5-11 – + 1 to 2 x CAL18-11 or 1 to 2 x CEL18 + 1 x CAL18-11 or 1 x CEL18 – + 1 x 1-pole CA5 or CE5 (1) or 1 x 4-pole CA5 + 1 x 1-pole CA5 or CE5 (1) or 1 x 4-pole CA5 + 2 x 1-pole CA5 or CE5 (1) or 1 x 4-pole CA5 + 2 x 1-pole CA5 or CE5 (1) or 1 x 4-pole CA5 + 1 x 1-pole CA5 or 1 x TEF5 + 1 x 1-pole CA5 or 1 x TEF5 + 2 x 1-pole CA5 or 1 x TEF5 + 2 x 1-pole CA5 – + 2 x 1-pole CA5 or CE5 (1) or 1 x 4-pole CA5 VE5 – + 2 x 1-pole CA5 or CE5 (1) – – – + 1 x CAL5-11 – x CA5 x CE5 to 2 x CA5 to 2 x CE5 – – + 1 to 2 x CAL5-11 – – – + 1 to 2 x CAL5-11 – 1 to 2 x CA5 1 to 2 x CE5 – – + 1 to 2 x CAL18-11 or 1 to 2 x CEL18 – 1 1 1 1 1 1 1 1 1 1 1 1 to to to to to to to to 6 5 6 5 6 5 6 5 x x x x x x x x CA5 CE5 max. CA5 CE5 max. CA5 CE5 max. CA5 CE5 max. (2) (2) (2) (2) or 1 x 4-pole CA5 + 2 x 1-pole CA5 or CE5 (2) or 1 x 4-pole CA5 + 2 x 1-pole CA5 or CE5 (2) or 1 x 4-pole CA5 + 2 x 1-pole CA5 or CE5 (2) or 1 x 4-pole CA5 + 2 x 1-pole CA5 or CE5 (2) or 1 x TEF5 + 1 to 2 x CAL5-11 + 1 x CAL5-11 or 1 x VE5-2 + 1 x CAL5-11 or 1 x VE5-2 + 1 x CAL5-11 or 1 x VE5-2 + 2 x 1-pole CA5 or 1 x TEF5 + 2 x 1-pole CA5 or 1 x TEF5 + 2 x 1-pole CA5 or 1 x TEF5 – – + 2 x 1-pole CA5 Notes regarding combination of CE5 with other accessories: (1) The total number of N.O. or N.C. CE5 and other additional N.C. CA5 auxiliary contacts is limited to 3. CES auxiliary contacts not allowed in mounting position 5. (2) The total number of N.O. or N.C. CE5 and other additional N.C. CA5 auxiliary contacts is limited to 5. 1SBC101585S0201 - Rev. A 5 1 0 Side-mounted accessories Auxiliary contact blocks Interlock unit 5/370 | ABB Function markers Mounting piece BA5-50 Function markers 1SBC575874F0301 Description BA5-50 Set of 50 function markers designed to be clipped onto the front face of devices. Details can be added to these markers using a ball point pen, indelible felt-tip pen or pentel white. Self-adhesive labels (not supplied) can also be added to them. Marker dimensions: 7 x 19 mm (0.276" x 0.748"). Ordering details For contactors Type Order code Pkg qty UA, UA..RA and accessories GA75, GAE75 BA5-50 1SBN110000R1000 1 Weight (1 pce) kg 0.017 5 1SBC586724F0302 BP16 Mounting piece Description Mounting piece for screw fixing (M4, not supplied) of UA, UA..RA series contactors indicated in the table below. Easy handling of screwdrivers and screw driving. Add-on mounting piece on contactor's rear face, offering a wide fixing facility. Ordering details Type Order code Pkg qty UA16, UA16..RA BP16 1SBN111403R1000 100 35 1.38" Weight (1 pce) kg 0.141 ø 4.5 0.18" M4 8-32 UNC 4.5 0.18" 1SBC101531S0201 - Rev. B 84 3.31" BP16 For contactors 4.5 0.18" Drilling plan for UA16, UA16..RA contactors with BP16 ABB | 5/371 Surge suppressors for contactor coils Description (V) 1000 T (µs) 0 100 1000 100 1SBC574001F0301 A 884D 0 5 1SBC573891F0301 RV5/50 RC5-1/50 The operation of inductive circuits causes overvoltages, in particular on opening of the contactor coil. The electromagnetic energy stored in the coil during contactor closing is restored on opening in the form of surges, the slope and amplitude of which may rise to several kilovolts. A number of drawbacks are observed ranging from interference on the electronic devices to breakdown of insulators and even destruction of certain sensitive components. The graph opposite reproduces the oscillogram showing voltage discharges at the terminals of a 42 V / 50 Hz coil without peak clipping. The coil was switched by 8 series-connected poles of a contactor relay. Following a burst of discharges with a very steep slope a damped oscillation emerges with a peak value of 3500 V. Overvoltage Factor The overvoltage factor k is defined as the ratio of the maximum overvoltage peak value Ûs to the peak value Ûc of the coil rated control voltage Uc: Ûs max. Ûs max. Ûs max. k = in DC: k = or in AC: k = Ûc Uc Uc√2 3500 For example the following is obtained for the above graph: k = ≈ 60 42 √2 To reduce the harmful effects of these overvoltages, ABB has developed a range of surge suppressors designed to reduce the k factor defined above and to limit or even completely eliminate the high pre-damping voltage frequencies. Each case is different, but the technical data tolerances and the generous sizing of parts have enabled us to reduce the number of variants. We have chosen the following solutions: transil diodes, varistors and RC blocks. Note: A varistor is a resistor whose value decreases to a very large extent when a certain voltage is applied at its terminals. Ordering details For contactors UA, UA..RA GA75, GAE75 UA, UA..RA GA75 Type Order code Pkg qty Weight (1 pce) V 24...50 AC ● DC ● RV5/50 1SBN050010R1000 2 kg 0.015 50...133 ● ● RV5/133 1SBN050010R1001 2 0.015 110...250 ● ● RV5/250 1SBN050010R1002 2 0.015 250...440 ● ● RV5/440 1SBN050010R1003 2 0.015 24...50 50...133 110...250 250...440 12...32 25...65 50...90 77...150 150...264 ● ● ● ● – – – – – – – – – ● ● ● ● ● RC5-2/50 RC5-2/133 RC5-2/250 RC5-2/440 RT5/32 RT5/65 RT5/90 RT5/150 RT5/264 1SBN050200R1000 1SBN050200R1001 1SBN050200R1002 1SBN050200R1003 1SBN050020R1000 1SBN050020R1001 1SBN050020R1002 1SBN050020R1003 1SBN050020R1004 2 2 2 2 2 2 2 2 2 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 1SBC101527S0201 - Rev. B GAE75 Rated control circuit voltage Uc 5/372 | ABB Surge suppressors for contactor coils Technical data Varistor RV5/50 RV5/133 RV5/250 RV5/440 24...50 V AC 50...133 V AC 110...250 V AC 250...440 V AC 24...50 V DC 50...133 V DC 110...250 V DC 250...440 V DC 132 V AC 270 V AC 480 V AC 825 V AC 132 V DC 270 V DC 480 V DC 825 V DC 1.1...1.5 -20...+70 °C Clip-on for both fixing and connection. Clipped onto the top part of the contactor base without change in contactor overall dimensions. High energy absorption: good damping - Unpolarized system. Clipping as from Uvdr*, thus voltage front up to this point. *Uvdr = Varistor operating voltage (voltage dependent resistor), tolerance ± 10 %. Rated control circuit voltage Uc Residual overvoltage (clipping voltage) Opening time growth factor Operating temperature Connection to the coil terminals (parallel mounting) Fixing Advantages Drawback 5 RC type RC5-2/50 RC5-2/133 RC5-2/250 RC5-2/440 24...50 V AC 50...133 V AC 110...250 V AC 250...440 V AC 2 to 3 x Uc max. 1.2...1.3 -20...+70 °C Clip-on for both fixing and connection. Clipped onto the top part of the contactor base without change in contactor overall dimensions. Very fast clipping - Attenuation of steep fronts and thus of high frequencies. No operating delays. Rated control circuit voltage Uc Residual overvoltage (clipping voltage) Opening time growth factor Operating temperature Connection to the coil terminals (parallel mounting) Fixing Advantages Transil diode RT5/32 RT5/65 RT5/90 RT5/150 RT5/264 12...32 V DC 25...65 V DC 50...90 V DC 77...150 V DC 150...264 V DC 50 V DC 100 V DC 150 V DC 210 V DC 390 V DC 1.5...3 -20...+70 °C Clip-on for both fixing and connection. Clipped onto the top part of the contactor base without change in contactor overall dimensions. Good energy absorption - Unpolarized system - Simple, reliable system. A certain delay on drop out which does not however reduce contactor breaking capacity. Rated control circuit voltage Uc Residual overvoltage (clipping voltage) Opening time growth factor Operating temperature Connection to the coil terminals (parallel mounting) Fixing Advantages Drawback Wiring diagrams E0734D A2 Varistor A2 RC type A2 E0733D A1 A1 E0735D A1 Transil diode E0844D The add-on block does not increase the contactor overall dimensions 1SBC101335S0201 - Rev. A Dimensions RV5, RC5, RT5 ABB | 5/373 1SBC101005F0014 Interface relays RA5-1 5 Description RA5-1 interface relay is designed to receive 24 V DC signals delivered by PLC’s or other sources with a low output power and to restore them with sufficient power to operate the coils of the relevant contactors. RA5-1 interface relay is made up of a miniature electromechanical relay equipped with a N.O. contact and with a low consumption 24 V DC coil. The interface relay coil is controlled by the PLC while the N.O. contact ensures switching of the power contactor. Coil switching gives rise to overvoltages which have adverse effects on the electronic devices, insulators and, more generally, on component lifetime. The RA5-1 is equipped with surge suppressors: – – on the 24 V DC relay coil via a diode, – – on the power contactor coil via a varistor. Furthermore, the RA5-1 is protected against relay pole reversal by a diode inserted between the E1 and E2 input terminals. Ordering details For contactors V 50/60 Hz 24...250 Rated control circuit voltage Uc V DC 24 Type Order code Pkg qty Weight (1 pce) RA5-1 RA5-1 1SBN060300R1000 1SBN060300T1000 1 10 kg 0.050 0.050 1SBC101528S0201 - Rev. B UA, UA..RA GA75 Coil voltages 5/374 | ABB Interface relays Technical data Type RA5-1 Utilization characteristics according to IEC Standards IEC 60255-5 Rated insulation voltage Ui acc. to IEC 60947-4-1 250 V AC Ambient air temperature at Uc = 24 V DC (between E1 and E2) -25…+70 °C In free air operation from 0.85 to 1.1 x Uc -25…+55 °C Storage -40…+70 °C Climatic withstand Complies with that of associated contactors Maximum operating altitude 3000 m Mounting positions No limitation Fixing Using the contactor A1 and A2 teminal connecting parts Connecting characteristics Connection capacity (min. ... max.) Rigid solid 1x 2x 1x 2x L< l> Flexible with ferrule l L Lugs Tightening torque Recommended Max. Degree of protection 5 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 8 mm 3.5 mm 1 Nm 1.2 Nm Protection against direct contact in acc. with EN 50274 RA5-1 wired and mounted on the associated contactor Delivered in open position, screws of unused terminals must be tightened M3.5 Flat Ø 5.5 / Pozidriv 2 acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screw terminals All terminals Screwdriver type Working data Surge suppression For contactor coil For interface relay coil Protection against polarity reversal between terminals E1 and E2 Interface relay operating time Total operating time, interface relay + contactor N.O. contact closing Between energization and: N.C. contact opening N.O. contact opening N.C. contact closing Between de-energization and: Varistor Diode Diode Closing and drop-out ≤ 10 ms 20…37 17…32 17…25 20…28 ms ms ms ms Electrical input data Control voltage (E1 and E2 terminals) Uc Rated value Max. range at ambient temperature 20 °C Max. consumption for Uc = 24 V DC, θ = 20 °C "0" status (relay open) "1" status (relay closed) Max. short supply interruption immunity time 24 V DC 19…30 V DC 0.3 W for Uc ≤ 2.4 V DC for Ic < 1 mA for Uc ≥ 19 V DC 2 ms Electrical output data Switching voltage (A0 and A2 terminals) Electrical durability Number of operating cycles ≤ 250 V AC 2 millions (600 cycles/h) on UA16(RA) ... UA75(RA), GA75, GAE75 contactors 0.5 million (600 cycles/h) on UA95(RA) and UA110(RA) contactors The "E1+" and "E2-" input terminals must be connected, according to their polarity, to the PLC output. The RA5-1 is equipped with two terminal pads for connection to the A1 and the A2 terminals of the contactor coil. This coil is supplied between the A0 and the A2 terminals of the RA 5-1. Mounting: terminals pads clamped inside the contactor coil terminals. PLC Output Uc ≤ 250 V AC – A2 E2 – A0 24 V DC + E1 + RA 5-1 KM1 A2 E0742DG A1 ABB | 5/375 1SBC101337S0201 Rev. A Connection Mechanical latching units 1SBC565483F0301 Description WB75-A E1 E2 E2676D 5 Terminal marking For converting standard contactors into latched contactors. The WB75-A block contains a mechanical latching device with electromagnetic impulse unlatching (AC or DC) or manual unlatching. Captive screw type connecting terminals, built-in cable clamps, M3.5 (+,-) pozidriv 2 screw with screwdriver guidance; delivered untightened and protected against accidental direct c ontact. Operation After closing, the contactor continues to be held in the closed position by the latching mechanism should the supply voltage fail at the contactor coil terminals. Contactor opening can be controlled: – – electrically by an impulse (AC or DC) on the WB75-A block coil. (the coil is not designed to be permanently energized) –– manually by pressing the pushbutton on the front face of the WB75-A block. Mounting The WB75-A block is clipped onto the front face of the 1-stack contactor where it takes up two slots. The two other slots may accept CA5... single pole auxiliary contacts (1 block on each side of the mechanical latch). Ordering details For contactors Type Order code Pkg qty Weight (1 pce) WB75-A WB75-A WB75-A WB75-A WB75-A WB75-A WB75-A WB75-A FPTN372726R1001 FPTN372726R1002 FPTN372726R1003 FPTN372726R1004 FPTN372726R1006 FPTN372726R1005 FPTN372726R1007 FPTN372726R1008 1 1 1 1 1 1 1 1 kg 0.120 0.120 0.120 0.120 0.120 0.120 0.120 0.120 1SBC101526S0201 - Rev. B UA16 ... UA75, GA75, GAE75 Rated control circuit voltage Uc V 50 Hz or DC V 60 Hz 24 24...28 42 42...48 48 48...55 110 110...127 220...230 220...255 230...240 230...277 380...415 380...440 415...440 440...480 5/376 | ABB Mechanical latching units Technical data Type WB75-A Utilization characteristics according to IEC Rated insulation voltage Ui acc. to IEC 60947-1 Max. electrical impulse time On AC coil (with load factor 5 %) On DC coil (with load factor 3 %) Min. electrical impulse time For latching (energizing of the contactor coil) 690 V 20 s 8s AC DC AC For pull-out (energizing of the WB block coil) DC AC or DC supply Coil operating limits AC control voltage 50/60 Hz Rated control circuit voltage Uc Coil consumption 50 ms (UA, GA contactors) 50 ms (GAE contactors) 30 ms (UA, GA contactors) 50 ms (GAE contactors) 0.85…1.1 x Uc 5 24…480 V AC Average pull-in value 90 VA Average holding value 60 VA DC control voltage Rated control circuit voltage Uc Coil consumption Average pull-in value Average holding value 24…440 V DC 110 W 110 W Operating time On contactor closing (latching) Between coil energization and: N.O. contact closing N.C. contact opening No difference with the operation of a contactor without mechanical latching unit No difference with the operation of a contactor without mechanical latching unit N.O. contact opening N.C. contact closing 5…25 ms 7…28 ms On contactor opening (unlatching) Between WB coil energization and: Mechanical durability Number of operating cycles Max. switching frequency 1 million operating cycles 3600 cycles/h with on-load factor of 8 % Connecting characteristics 1x 2x 1x 2x L< l> Flexible with ferrule l L Lugs Tightening torque Screw terminals All terminals Screwdriver type Recommended Max. 1...4 mm² 1...4 mm² 0.75...2.5 mm² 0.75...2.5 mm² 8 mm 3.5 mm 1 Nm 1.2 Nm Delivered in open position, screws of unused terminals must be tightened M3.5 Flat Ø 5.5 / Pozidriv 2 1SBC101333S0201 - Rev. B Connection capacity (min. ... max.) Rigid solid ABB | 5/377 1SBC580742F0301 Additional terminal blocks and other accessories Terminal blocks Description The LD terminal blocks are designed to increase the connecting capacity of the contactor on which they are fitted and for preparation of the wiring before final connection on the contactor. The LD blocks are 3-pole terminal blocks with tunnel terminals. The LD75 terminal blocks are fixed in the 3 independent slots located above the built-in connectors. LD75 Ordering details 5 For contactors Type Order code Pkg qty UA50(RA) ... UA75(RA) LD75 1SBN073508R1000 1 Weight (1 pce) kg 0.115 Technical data Types Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Main terminals LD75 690 V 600 V Screw terminals with single connector 10x11 mm Connection capacity (min. ... max.) Rigid Solid (≤ 4 mm²) Stranded (≥ 6 mm²) Flexible with ferrule Bars Tightening torque Degree of protection 1x 2x 1x 2x 6...50 mm² 6...25 mm² 6...35 mm² 6...16 mm² 10 mm 4 Nm IP10 acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Delivered in closed position M6 Screwdriver type pozidriv 2 Screw terminals Note: The utilization of LD additional terminal blocks leaves the possibility to connect the following cables directly into the contactor main terminals. Possible cross section of rigid cable in the contactor terminals LD75 50 mm² 1SFT98000-011C3 Terminal enlargements Description Enlargement pieces designed to increase the width of the contactor terminal pads in order to allow larger connections to be mounted. Sets containing 3 tin plated copper bars fixed by an isolating spacer. 5/378 | ABB For contactors Dimensions UA95, UA110 hole Ø mm 6.5 bar mm 15 x 3 Type Order code Pkg qty Weight (1 pce) LW110 1SFN074307R1000 1 kg 0.100 1SBC101534S0201 - Rev. B Ordering details LW Terminals for control lead connections 1SBC575763F0301 Description 1SBC575773F0301 LK75-L Terminals designed to connect the control conductors to the main poles of the UA and GA contactors and derivative versions. Accessories clipped into the slots placed above each power terminal connector. The LK75 are fitted with a pin designed to hold them in place until the connector has been fully clamped with its power cable. – – Degree of protection IP20 – – Connecting terminal delivered in open position: cable clamp and M3.5 (+,-) pozidriv 2 screw. – – Cable cross-sectional area: -- 1 or 2 rigid conductors...........................................1...4 mm² -- 1 or 2 flexible conductors with cable end................0.75...2.5 mm² – – Tightening torque for the LK screw: -- recommended........................................................1.00 Nm -- maxi.......................................................................1.20 Nm 5 LK75-F Ordering details For contactors Type Order code Pkg qty Right and left on: UA50(RA) ... UA75(RA) GA75, GAE75 LK75-L 1SBN073552R1003 2 Weight (1 pce) kg 0.006 Opposite on: UA50(RA) ... UA75(RA) GA75, GAE75 LK75-F 1SBN073552R1002 2 0.006 Note: The LK terminals provided for the UA contactors can be used with the AM types. LK positioning 19 0.75" 11 0.43" 13 0.51" 13 0.51" 13 0.51" mm, inches LK75-L LK75-F 19 0.75" 1SBC101535S0201 - Rev. B Main dimensions ABB | 5/379 Contactor coils and main contact sets Contactor coils 1SBC573802F0302 Ordering details ZA16 For contactors UA16, UA16..RA UA26, UA30, UA26..RA, UA30..RA 5 UA50 … UA75 UA50..RA ... UA75..RA GA75 UA95, UA110 UA95..RA, UA110..RA Rated control circuit voltage Uc V 50 Hz V 60 Hz 24 24 48 48 110 110…120 220…230 230…240 230...240 240…260 380…400 400…415 400…415 415…440 24 24 48 48 110 110…120 220…230 230…240 230...240 240…260 380…400 400…415 400…415 415…440 24 24 48 48 110 110…120 220…230 230…240 230...240 240…260 380…400 400…415 400…415 415…440 24 24 48 48 110 110…120 220…230 230…240 230...240 240…260 380…400 400…415 400…415 415…440 Type Order code Pkg qty Weight (1 pce) ZA16 ZA16 ZA16 ZA16 ZA16 ZA16 ZA16 ZA40 ZA40 ZA40 ZA40 ZA40 ZA40 ZA40 ZA75 ZA75 ZA75 ZA75 ZA75 ZA75 ZA75 ZA110 ZA110 ZA110 ZA110 ZA110 ZA110 ZA110 1SBN151410R8106 1SBN151410R8306 1SBN151410R8406 1SBN151410R8006 1SBN151410R8806 1SBN151410R8506 1SBN151410R8606 1SBN152410R8106 1SBN152410R8306 1SBN152410R8406 1SBN152410R8006 1SBN152410R8806 1SBN152410R8506 1SBN152410R8606 1SBN153510R8106 1SBN153510R8306 1SBN153510R8406 1SBN153510R8006 1SBN153510R8806 1SBN153510R8506 1SBN153510R8606 1SFN154310R8106 1SFN154310R8306 1SFN154310R8406 1SFN154310R8006 1SFN154310R8806 1SFN154310R8506 1SFN154310R8606 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 kg 0.093 0.093 0.093 0.093 0.093 0.093 0.093 0.148 0.148 0.148 0.148 0.148 0.148 0.148 0.166 0.166 0.166 0.166 0.166 0.166 0.166 0.170 0.170 0.170 0.170 0.170 0.170 0.170 Main contact sets Description The contact sets for 3-pole contactors consists of six fixed contacts, three moving contacts, springs and the required screws. Ordering details Type Order code Pkg qty UA50 UA63 UA75 UA95 UA110 ZLU50 ZLU63 ZLU75 ZLU95 ZLU110 1SBN163502R1000 1SBN163702R1000 1SBN164102R1000 1SFN164302R1000 1SFN164502R1000 1 1 1 1 1 Weight (1 pce) kg 0.115 0.145 0.145 0.190 0.190 1SFC101143C0201 - Rev A For contactors 5/380 | ABB Accessories for EK550, EK1000 contactors Auxiliary contact blocks 5/382 Mechanical interlock units, terminal shrouds and connection sets 5/386 Surge suppressors for contactor coils 5/388 Main contact sets - Arc chutes 5/390 Contactor coils 5/391 Summary_5-11 5 ABB | 5/381 Auxiliary contact blocks Description E2074D The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits. Mounting positions of the CAL16-11 Types of auxiliary contact blocks for standard industrial environments: –– CAL instantaneous with N.O. + N.C. contacts –– CCL N.O. leading contact + N.C. lagging contact. The auxiliary contact blocks are equipped with screw type connecting terminals delivered open, protected against accidental direct contact, and bear the corresponding function m arking. Mounting: Screwed onto the right and / or lefthand side of the EK550, EK1000 contactors. Ordering details For contactors Number of blocks Auxiliary contacts Type Order code Pkg qty Weight (1 pce) kg 5 2-pole auxiliary contacts N.O. + N.C. 1 1 1 EK 1 1 1 1 1 1 1 1 1 1 1 – – – – – – – – – – 1 CAL16-11A CAL16-11B CAL16-11C CAL16-11D CCL16-11E (1) SK829002-A SK829002-B SK829002-C SK829002-D SK829002-E 1 1 1 1 1 0.050 0.050 0.050 0.050 0.050 1SFC101221C0201 (1) Mounting of CCL16-11E blocks does not allow an additional second block to be added on top of it. All DC operated EK contactors are equipped with one CCL16-11E on the right side. 5/382 | ABB Auxiliary contact blocks Technical data 2-pole CAL 16-11, 2-pole CCL 16-11 Types Contact utilization characteristics according to IEC IEC 60947-5-1 and EN 60947-5-1 690 V 24...690 V 10 A 50/60 Hz Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated operational voltage Ue max. Conventional thermal current Ith - θ ≤ 40 °C Rated frequency (without derating) Ie / Rated operational current AC-15 24-127 V 220-240 V 380-440 V 500-690 V acc. to IEC 60947-5-1 Making capacity acc. to IEC 60947-5-1 Breaking capacity acc. to IEC 60947-5-1 Ie / Rated operational current DC-13 6A 6A 4A 1A 10 x Ie AC-15 10 x Ie AC-15 5 6A 6A 4A 1.8 A 0.6 A 10 A for 1.0 s 50 A for 0.1 s 100 A 0.25 VA / 12 V or 0.25 VA / 5 mA 24 V DC 48 V DC 72 V DC 125 V DC 250 V DC acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw θ = 40 °C Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Power dissipation per pole at 6 A Mechanical durability Number of operating cycles Max. switching frequency Electrical durability Number of operating cycles Max. switching frequency 0.2 W 10 millions operating cycles 3600 cycles/h see "Electrical durability" curves 1200 cycles/h Contact utilization characteristics according to UL / CSA 600 V A600 Max. operational voltage Pilot duty Connecting characteristics Connection capacity (min. ... max.) Rigid solid Flexible with ferrule Flexible with insulated ferrule L Lugs 6 Tightening torque Recommended Max. Degree of protection 1x 2x 1x 2x 1x 2x L≤ l> 0.5...2.5 mm² 0.5...2.5 mm² 0.5...2.5 mm² 0.5...2.5 mm² 0.5...1.5 mm² 0.5...1.5 mm² 8 mm 3.7 mm 1.00 Nm 1.20 Nm IP20 acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Delivered in open position, screws of unused terminals must be tightened M3.5 Pozidriv 2 1SBC101656S0201 Screw terminals All terminals Screwdriver type ABB | 5/383 Auxiliary contacts Electrical durability Electrical Durability for AC-15 Utilization Category AC-15 utilization category according to IEC 60947-5-1 / EN 60947-5-1: –– making current: 10 x Ie with cos ϕ = 0.7 and Ue – – breaking current: Ie with cos ϕ = 0.4 and Ue. This curve represents the electrical durability of the auxiliary contacts in relation to the breaking current. The curve has been drawn for resistive and inductive loads up to 690 V, 40...60 Hz. 30 20 10 3 2 1 0.5 0.3 0.2 0.1 0.02 0.05 0.1 0.2 0.3 0.5 1 2 3 4 5 6 10 Breaking current (A) 2-pole CAL16... and CCL16... auxiliary contact blocks Electrical Durability for DC-13 Utilization Category DC-13 utilization category according to IEC 60947-5-1 / EN 60947-5-1: –– making and breaking current = Ie with Ue value. 100 70 50 6 1.10 cycles 6 Breaking power (W) 3.10 cycles 20 6 10.10 cycles 10 Example: Control of d.c. electro-magnet: Ue voltage = 72 V d.c. and breaking power = 70 W. On the opposite curve at intersection "O" 72 V / 70 W the correspon-ding value for the electrical durability is approximately 2.106 cycles. 5 2 1 10 20 24 50 72 100 200 250 500 Voltage (V) 2-pole CAL16... and CCL16... auxiliary contact blocks 1SBC101657S0201 5 Million operating cycles 5 5/384 | ABB Add-on auxiliary contacts Terminal marking and positioning 2-pole auxiliary contacts 14 21 31 NC NC 22 32 CAL16-11A 43 NO 44 CAL16-11B 53 NO 54 61 71 83 35 47 NC NC NO NC NO 62 72 84 36 48 CAL16-11C CAL16-11 D CAL16-11E 5 1SBC101687S0201 13 NO ABB | 5/385 Mechanical interlock units, terminal shrouds and connection sets Mechanical interlock units A090C4 Description The mechanical interlock unit prevents one of the contactors from closing as long as the other contactor is closed. VH800 interlock unit is used for the mechanical interlocking of two horizontal mounted EK550, EK1000 contactors. Mounting plate is included. Ordering details For contactors Type Order code Mechanical interlock unit for two horizontal mounted contactors EK550, EK1000 VH800 SK829070-F 5 Pkg qty Weight (1 pce) kg 1 6.000 Terminal shrouds Description The use of terminal shrouds on the main terminals of EK contactors is required in electrical panels or cubicles to be built in compliance with the rules for protection against direct contact with live parts in acc. with EN 50274. On EK550, EK1000 contactors: – – The auxiliary contact blocks and coils are designed to provide an IP20 degree of protection – – The main terminals, equipped with lugs or connectors, can be protected against accidental direct contact after wiring (EN 50274) by the addition of terminal shrouds (see table below). Each terminal shroud protects all the terminals on one side of the contactor. Two terminal shrouds should be provided for each separate contactor. Ordering details A1 3 5 7 7 5 3 1 4 6 8 8 6 4 2 BSS550, BSS1000 Type Order code Pkg qty EK550 EK1000 LT550-EK LT1000-EK SK178001-LB SK178001-MB 1 1 Weight (1 pce) kg 0.190 0.200 Connection sets A1 Description A2 E0747D A2 1 2 For contactors Connection between the main poles of two 4-pole contactors mounted side by side so that they operate as source reversing contactors. These sets are made up of four downstream connections. BSS550, BSS1000 – Bare, solid copper bars. For contactors Type Order code Mechanical and electrical interlock units for two horizontal mounted contactors EK550 BSS550 SK829090-E EK1000 BSS1000 SK829090-H 5/386 | ABB Pkg qty Weight (1 pce) kg 1 1 3.300 5.500 1SFC101222C0201 Ordering details Mechanical interlocks units Mechanical and electrical interlock units Technical data Types VH145 VH300 Contact utilization characteristics according to IEC IEC 60947-5-1 and EN 60947-5-1 690 V 600 V 24 ... 690 V 10 A Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated insulation voltage Ui acc. to UL / CSA Rated operational voltage Ue max. Conventional thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 24-127 V 50/60 Hz 220-240 V 50/60 Hz 380-440 V 50/60 Hz 500-690 V 50/60 Hz Making capacity acc. to IEC 60947-5-1 Breaking capacity acc. to IEC 60947-5-1 Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 Short-circuit protection device - gG type fuse Rated short-time withstand current Icw θ = 40 °C Power dissipation per pole at 6 A Mechanical durability Number of operating cycles Max. switching frequency 6A 6A 4A 1A 10 x Ie AC-15 10 x Ie AC-15 5 6A 6A 4A 1.8 A 0.6 A 10 A for 1.0 s 100 A for 0.1 s 140 A 0.15 W 24 V DC 48 V DC 72 V DC 125 V DC 250 V DC 1 million operating cycles 600 cycles/h Connecting characteristics Connection capacity (min. ... max.) Rigid solid Flexible with ferrule l L Bars or lugs Tightening torque Recommended Max. Degree of protection 1x 2x 1x 2x L< l> 1 ... 2.5 mm² 1 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 8 mm 3.7 mm 1 Nm 1.2 Nm IP20 acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screw terminals All terminals Screwdriver type Delivered in open position, screws of unused terminals must be tightened M3.5 Flat Ø 5.5 / Pozidriv 2 1SFC101073C0201 Technical note: when, during switching, the arc time is estimated to more than 40 ms, the closing signal of one of the two contactors must be delayed with respect to the opening signal of the other contactor in order to prevent a short-circuit. Use a TP40 pneumatic timer or TE5S electronic timer with time lapse, as applicable. ABB | 5/387 Surge suppressors for contactor coils Description (V) 1000 T (s) 100 0 1000 100 A078 A 884D 0 RC-EH Ordering details For contactors EK550, EK1000 EK550, EK1000 EK550, EK1000 Rated control circuit voltage Uc V AC ● 48...110 24...125 – ● 220...600 Type DC – ● – RC-EH800/110 RC-EH800/110 RC-EH800/600 Order code SK829007-C SK829007-C SK829007-D Pkg qty 1 1 1 Weight (1 pce) kg 0.015 0.015 0.015 1SFC101223C0201 5 The operation of inductive circuits causes overvoltages, in particular on opening of the contactor coil. The electromagnetic energy stored in the coil during contactor closing is restored on opening in the form of surges, the slope and amplitude of which may rise to several kilovolts. A number of drawbacks are observed ranging from interference on the electronic devices to breakdown of insulators and even destruction of certain sensitive components. The graph opposite reproduces the oscillogram showing voltage discharges at the terminals of a 42 V / 50 Hz coil without peak clipping. The coil was switched by 8 series-connected poles of a contactor relay. Following a burst of discharges with a very steep slope a damped oscillation emerges with a peak value of 3500 V. Overvoltage Factor The overvoltage factor k is defined as the ratio of the maximum overvoltage peak value Ûs to the peak value Ûc of the coil rated control voltage Uc: Ûs max. Ûs max. Ûs max. k = in DC: k = or in AC: k = Ûc Uc Uc√2 3500 For example the following is obtained for the above graph: k = ≈ 60 42 √2 To reduce the harmful effects of these overvoltages, ABB has developed a range of surge suppressors designed to reduce the k factor defined above and to limit or even completely eliminate the high pre-damping voltage frequencies. Each case is different, but the technical data tolerances and the generous sizing of parts have enabled us to reduce the number of variants. We have chosen the following solutions: transil diodes, varistors and RC blocks. Note: A varistor is a resistor whose value decreases to a very large extent when a certain voltage is applied at its terminals. 5/388 | ABB Surge suppressors for contactor coils Technical data Varistor + RC RC-EH800/110 RC-EH800/600 48...110 V AC 220...600 V AC 24...125 V DC – 205 V AC 1100 V AC 205 V DC – 1.1 ... 1.15 -20 ... +70 °C Flexible, accessible leads, equipped with forked lugs Glued to the top part of the contactor base - High energy absorption: good damping - Unpolarized system - The RC system damps the voltage front under the Uvdr (1) threshold. Rated control circuit voltage Uc Residual overvoltage (clipping voltage) Opening time growth factor Operating temperature Connection to the coil terminals (parallel mounting) Fixing Advantages (1) Uvdr = Varistor operating (voltage dependant resistor), tolerance ±10 %. 5 Wiring diagrams A2 E0736D U A1 Varistor + RC mm 30 Main dimensions 57.5 15 E0845D 175 1SFC101224C0201 RC-EH ABB | 5/389 Main contact sets Arc chutes Main contact sets 1SBC586473F0304 Description KZK The contact sets for 4-pole contactors consist of eight fixed contacts, four moving contacts, springs and the necessary screws. In addition, the sets include four moving arcing contacts for EK550, EK1000 contactors. Ordering details For contactors Type Order code Pkg qty EK550 EK1000 KZK550 KZK1000 SK827204-B SK827204-F 1 1 Weight (1 pce) kg 2.400 3.000 5 Arc chutes Description The arc chutes sets for EK 4-pole contactors contain 8 pieces. Ordering details Type Order code Pkg qty EK550 EK1000 KWK550 KWK1000 5223351-Z 5223351-AN 1 1 Weight (1 pce) kg 3.170 3.170 1SFC101226C0201 For contactors 5/390 | ABB Contactor coils For AC operated coil Coils for EK550, EK1000 - AC operated. Ordering details For contactors KH300 EK550, EK1000 Rated control circuit voltage Uc (1) V 50 Hz V 60 Hz 48 110 110...120 110...115 115...127 220 220...240 220...230 230...255 380 380...415 380…400 400...440 400…415 - Type Order code Pkg qty Weight (1 pce) KH800 KH800 KH800 KH800 KH800 KH800 KH800 KH800 SK828100-AD SK828100-EF SK828100-EG SK828100-EL SK828100-EM SK828100-EP SK828100-ER SK828100-AR 1 1 1 1 1 1 1 1 kg 0.950 0.950 0.950 0.950 0.950 0.950 0.950 0.950 5 (1) Other control voltages, see voltage code table. For DC operated coil Description Coils for EK550, EK1000 - DC operated with sets including a DC coil, an economy resistor and a insertion contact. Ordering details For contactors Rated control circuit voltage Uc Type Order code Pkg qty Weight (1 pce) KP800 KP800 KP800 KP800 KP800 KP800 KP800 KP800 SK828150-DB SK828150-DC SK828150-DD SK828150-DT SK828150-DG SK828150-DE SK828150-DU SK828150-DF 1 set 1 set 1 set 1 set 1 set 1 set 1 set 1 set kg 1.060 1.060 1.060 1.060 1.060 1.060 1.060 1.060 (1) EK550, EK1000 V DC 24 36 48 60 75 110 125 220 (1) Other control voltages, see voltage code table. 1SFC101227C0201 1SBC273813F0302 Description ABB | 5/391 Voltage code table The below tables indicate the available coil voltages and corresponding digits for order codes. When placing an order, please give the order code. Select a standard contactor from ordering detail pages. Change the coil voltage code in the order code according to the table below. Example: for contactor AF400-30-11 and coil 100...250 V 50/60 Hz, the order code is 1SFL577001R7011. AF09 ... AF370 3-pole contactors AF09 ... AF370 4-pole contactors Auxiliary contacts N.O. N.C. Type AF09 - 30 - 10 - 13 Order code 1SBL137001R 13 10 AC coil code 50/60 Hz 41 24...60 V 11 24...60 V 12 48...130 V 13 100...250 V 14 250...500 V N.O. N.C. Main contacts 5 AF.. Contactor type AC / DC operated DC coil code 20...60 V 48...130 V 100...250 V 250...500 V Coil 41: not available for AF116 ... AF370 AF116 ... AF370 3-pole contactors with built-in PLC interface AC coil code 50/60 Hz 33 100...250 V 34 250...500 V DC coil code AC coil code 50/60 Hz 68 - 69 48...130 V 70 100...250 V 71 250...500 V DC coil code 100...250 V 250...500 V AF400 ... AF2650 3-pole contactors Auxiliary contacts N.O. N.C. Type AF400 - 30 - 11 Order code 1SFL577001R 69 11 N.O. N.C. Main contacts AF.. Contactor type AC / DC operated 24...60 V 48...130 V 100...250 V 250...500 V Coil 68, 69, 71: not available for AF1350 ... AF2650 AF09 ... AF38 3- and 4-pole contactors - low consumption Low coil consumption AF09 Z - 30 - 10 - 21 N.O. N.C. Main contacts AF.. Contactor type AC / DC operated 5/392 | ABB Order code 1SBL136001R 21 10 AC coil code 50/60 Hz 20 - 21 24...60 V 22 48...130 V 23 100...250 V DC coil code 12...20 V 20...60 V 48...130 V 100...250 V 1SBC101601S0201 - Rev. C Auxiliary contacts N.O. N.C. Type Voltage code table NF contactor relays Type Order code 1SBH137001R 13 22 NF 22 E - 13 AC coil code 50/60 Hz 41 24...60 V 11 24...60 V 12 48...130 V 13 100...250 V 14 250...500 V N.O. N.C. Number contacts Contactor type AC / DC operated NF DC coil code 20...60 V 48...130 V 100...250 V 250...500 V 5 NF contactor relays with overlapping of lagging / leading contacts N.O. leading contacts N.C. lagging contacts Type NF 33 / 11 - 13 Order code 1SBH137001R 13 39 N.O. N.C. Number contacts NF Contactor type AC / DC operated AC coil code 50/60 Hz 41 24...60 V 11 24...60 V 12 48...130 V 13 100...250 V 14 250...500 V DC coil code AC coil code 50/60 Hz 20 - 21 24...60 V 22 48...130 V 23 100...250 V DC coil code 20...60 V 48...130 V 100...250 V 250...500 V NF contactor relays - low consumption Low coil consumption Type Order code NF Z 22 E - 21 1SBH136001R 21 22 N.O. N.C. Number contacts NF Contactor type AC / DC operated 12...20 V 20...60 V 48...130 V 100...250 V NF contactor relays with overlapping of lagging / leading contacts - low consumption Low coil consumption N.O. leading contacts NF Z 33 / 11 E - 21 N.O. N.C. Number contacts NF Contactor type AC / DC operated Order code 1SBH136001R 21 39 AC coil code 50/60 Hz 20 - 21 24...60 V 22 48...130 V 23 100...250 V 1SBC101601S0201 - Rev. C N.C. lagging contacts Type DC coil code 12...20 V 20...60 V 48...130 V 100...250 V ABB | 5/393 Voltage code table GA contactors UA, UA..RA contactors GA contactors Auxiliary contacts N.O. N.C. Type GA75 - 10 - 00 Order code 1SBL411025R 82 00 N.O. N.C. Main contacts 5 GA GAE Contactor type DC switching - AC operated DC switching - DC operated Contactors: UA, UA..RA, GA AC coil code 50 Hz 60 Hz 81 24 V 24 V 16 26 V 28 V 17 28 V 32 V 82 42 V 42 V 20 42 V 48 V 83 48 V 48 V 73 60 V 60 V 74 100 V 100...110 V 26 105 V 110...127 V 84 110 V 110...120 V 89 110...115 V 115...127 V 29 120 V 140 V 30 125...127 V 150 V 34 175 V 208 V 36 190 V 220 V 40 210 V 240 V 80 220...230 V 230...240 V 88 230...240 V 240...260 V 42 230...240 V 277 V 85 380...400 V 400...415 V 86 400...415 V 415...440 V 50 400 V 440 V 51 400...415 V 480 V 87 415...440 V 440...460 V 53 440 V 500 V 55 500 V 600 V 56 550 V 58 660...690 V 59 - 690 V Contactors: GAE DC coil code 80 81 82 83 21 84 85 86 87 88 89 38 12 V 24 V 42 V 48 V 50 V 60 V 75 V 110 V 125 V 220 V 240 V 250 V Codes in bold for dual frequency coils. EK550, EK1000 contactors EK550 - 40 - 11 N.O. N.C. Main contacts Contactor type EK AC operated or DC operated 5/394 | ABB Order code SK827041 - AD AD AE AF AG AZ AH AK AL AM AN AP AR AS AT AU AV AC coil code 50 Hz 48 V - 110 V 127 V - 190 V - 220...230 V 230...240 V - 380...400 V 400...415 V - 440 V 500 V - 60 Hz 110 V 120 V 208 V 220 V 240 V 240 V 380 V 440 V 480 V 600 V EF EG EL EM EP ER Dual frequency coil code 50 Hz 60 Hz 110 V 110...120 V 110...115 V 115...127 V 220 V 220...240 V 220...230 V 230...255 V 380 V 380...415 V 380...400 V 400...440 V 2 auxiliary contact blocks maximum per contactor, ambient temperature ≤ 55 °C and mounting positions 2 and 6 excluded. DC coil code DB DC DD DT DG DE DU DF 24 V 36 V 48 V 60 V 75 V 110 V 125 V 220 V 1SBC101601S0201 - Rev. C Auxiliary contacts N.O. N.C. Type Voltage code table GAF185 ... GAF300 contactors Type Auxiliary contacts N.O. N.C. GAF185 - 10 - 11 Order code 1SFL497025R 69 11 N.O. N.C. Main contacts GAF AC coil code 50/60 Hz 72 - 69 48...130 V 70 100...250 V DC coil code AC coil code 50/60 Hz 68 - 69 48...130 V 70 100...250 V 71 250...500 V DC coil code AC coil code 50/60 Hz 70 100...250 V DC coil code 20...60 V 48...130 V 100...250 V 5 Contactor type AC / DC operated GAF460 ... GAF1250 contactors Type Auxiliary contacts N.O. N.C. GAF460 - 10 - 11 Order code 1SFL597025R 69 11 N.O. N.C. Main contacts GAF Contactor type AC / DC operated 24...60 V 48...130 V 100...250 V 250...500 V GAF1650, GAF2050 contactors Auxiliary contacts N.O. N.C. GAF1650 - 10 - 11 N.O. N.C. Main contacts GAF Order code 1SFL677025R 70 11 100...250 V Contactor type AC / DC operated 1SBC101601S0201 - Rev. C Type ABB | 5/395 Questionnaire for product specifications: Block contactors Tel.: .......................................................... e-mail: .................................................. Segments: ................................................................................................................ Application Control circuit Type: .. .............................................. No of phases: ...... Utilisation category (AC/DC): ............ % AC4 if any: ....... Rated operational voltage Ue: .......... V Cos j:............ Frequency:.......... Hz L/R: . ......... ms Nominal current In:........................... A Making current:................. A Breaking current: ......... A continuous temporary intermittent Duty: Load factor (% of ON time): . ............. % Number of cycles per hour: .............. or per year: . ......... Expected durability: ......................... operating cycles Number of main poles N.O.: . ............ N.C.: ................... Other information: .. ....................................................... Rated control Uc voltage:......... V DC AC f: ...... Hz Minimum / maximum: ................... V to .................... V Surge suppressor: ........................ type:....................... Interface with PLC: ....................... mA .............. V DC Accessories: ................................................................. Number of auxiliary contacts: N.O.: .......... N.C.: .......... AC Low level contacts: ............... mA .......... V DC Short circuit protection: ................................................ Circuit breaker Manual motor starter Type: Fuse Max short circuit current: ........................................... A Manual Motor Motor protection: Overload relay Starter Electronic overload relay Installation Ambient temperature: ................................................... Ambient environment: ................................................... Humidity: .................................................................. % Chemical pollution: ....................................................... Other: .......................................................................... Mounting position, see drawing below (Position 6: please consult factory): ................................................. Pos. 2 +30° Logistic and packaging Quantity by batch: ........................................................ Delivery order: .............................................................. Expected quantity: ........................................... per year Expected first delivery date: ............... and Qty: ............. Quantity on first 6 month: ............. on first year: ............. -30° Pos. 4 Approvals and other requirements Pos. 3 Pos. 1 Protection Pos. 1 ± 30° Pos. 5 Pos. 6 Wiring: Clamping screws or cage connectors Cable lugs (ring tongue) Other:........................................... Cross section:......... Additional comments:.................................................... Reference standards: .................................................... Required approvals: ...................................................... Customer specifications: ............................................... Shock and vibrations: ................................................... Specific quality assurance clauses: ................................ Other comments: .......................................................... 1SBC101701S0201 5 Tel.: .......................................................... e-mail: ...................................... . Date: ...................................................... 5/396 | ABB Questionnaire for product specifications: Block contactors Other comments: .. ......................................................................................................................................................... ..................................................................................................................................................................................... ..................................................................................................................................................................................... ..................................................................................................................................................................................... ..................................................................................................................................................................................... ..................................................................................................................................................................................... ..................................................................................................................................................................................... ..................................................................................................................................................................................... ..................................................................................................................................................................................... User Guide for the questionnaire 5 This document is used to define the contactor specifications according to the complete information on the application. Do not hesitate to join some complementary documents if necessary (schemes, tables, customer specification…). Please see below some definitions to help you : Operating cycle Includes one making operation and one breaking operation. Electrical Durability Number of on-load operating cycles that the contactor is able to carry out. It depends on the utilization category. Mechanical Durability Number of no-current operating cycles that the contactor is able to carry out Load Factor Ratio of the on-load operating time to the total cycle time x 100 (%). Intermittent Duty Duty during which the contactor is successively closed or open for periods which are too short to enable the contactor to achieve thermal balance. Temporary Duty Duty in which the main contacts of the contactor remain closed for periods insufficient to allow the equipment to reach stabilized temperature, the unload periods being separated by off-load periods of sufficient duration to restore the ambient temperature Continuous Duty Duty in which the main contacts of the contactor remain closed, with a continuous current during enough time to reach thermal stabilization, but no more than eight hours without interruption. Ambient Temperature Air temperature close to the contactor. Mounting Position Comply with the manufacturer's instructions. Restrictions could be taken into account for certain mounting positions. A contactor's duty is characterized by the utilization category together with the rated operational voltage and current indicated: Utilization categories for contactors according to IEC 60947-4-1 Utilization categories for contactor relays according to IEC 60947-5-1 See our catalog p7/8 Making and breaking current Current at contactor closing or at contactor opening 1SBC101701S0201 Time constant L/R (for DC circuit) Ratio of the inductance to the resistance (L/R = mH/Ω = ms) ABB | 5/397 Summary_6 6 6/0 | ABB AS..S, AF..S 3-pole contactors and NS..S, NF..S contactor relays with spring terminals AS..S 3-pole contactors - with spring terminals 6/3 Ordering details 6/4 Technical data 6/10 Electrical durability 6/16 Terminal marking and postioning 6/18 Main dimensions 6/20 Accessories 6/34 Voltage code table 6/41 NS..S contactor relays - with spring terminals Ordering details 6/3 6/22 Technical data 6/26 Terminal marking and postioning 6/30 Main dimensions 6/32 Accessories 6/34 Voltage code table 6/41 AF..S 3-pole contactors - with spring terminals 6/43 Overview 6/44 Ordering details 6/46 Technical data 6/52 Electrical durability 6/57 Terminal marking and postioning 6/61 Main dimensions 6/62 Accessories 6/80 Voltage code table 6/88 NF..S contactor relays - with spring terminals 6/43 Overview 6/66 Ordering details 6/68 Technical data 6/74 Terminal marking and postioning 6/77 6/78 Accessories 6/80 Voltage code table 6/88 Summary_6 Main dimensions 6 ABB | 6/1 Summary_6-1 6 6/2 | ABB AS..S 3-pole contactors and NS..S contactor relays with spring terminals AS..S 3-pole contactors - with spring terminals AS09..S ... AS16..S AC operated 6/4 ASL09..S ... ASL16..S DC operated 6/5 AS09..S ... AS16..S AC operated - 2-stack 6/6 ASL09..S ... ASL16..S DC operated - 2-stack 6/7 Main accessories 6/8 Technical data 6/10 Electrical durability 6/16 Terminal marking and postioning 6/18 Main dimensions 6/20 NS..S contactors relays - with spring terminals NS..S AC operated 6/22 NSL..S DC operated 6/23 Main accessories 6 6/24 Technical data 6/26 Terminal marking and postioning 6/30 Main dimensions 6/32 Accessories 6/34 Surge suppressors for contactor coils 6/38 Connecting links for starting solution and other accessories 6/40 Voltage code table 6/41 Summary_6-1 Auxiliary contact blocks - with spring terminals ABB | 6/3 AS09..S ... AS16..S 3-pole contactors 4 to 7.5 kW AC operated - with spring terminals 1SBC101009F0014 Description AS09-30-10S AS09 ... AS16 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with: –– spring terminals –– 3 main poles and 1 built-in auxiliary contact –– control circuit: AC operated –– add-on auxiliary contact blocks for front mounting and a comprehensive range of accessories. Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 20 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage use Uc rating (1) 600 V AC hp 5 A 12 6 5.5 7.5 22 22 7.5 12 10 15.2 V 50 Hz V 60 Hz 24 24 - 120 230 230 400 400 24 24 - 120 230 230 400 400 24 24 - 120 230 230 400 400 Auxiliary Type contacts fitted 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Order code Weight Pkg (1 pce) AS09-30-10S-20 AS09-30-01S-20 AS09-30-10S-16 AS09-30-01S-16 AS09-30-10S-26 AS09-30-01S-26 AS09-30-10S-28 AS09-30-01S-28 AS12-30-10S-20 AS12-30-01S-20 AS12-30-10S-16 AS12-30-01S-16 AS12-30-10S-26 AS12-30-01S-26 AS12-30-10S-28 AS12-30-01S-28 AS16-30-10S-20 AS16-30-01S-20 AS16-30-10S-16 AS16-30-01S-16 AS16-30-10S-26 AS16-30-01S-26 AS16-30-10S-28 AS16-30-01S-28 1SBL101004R2010 1SBL101004R2001 1SBL101004R1610 1SBL101004R1601 1SBL101004R2610 1SBL101004R2601 1SBL101004R2810 1SBL101004R2801 1SBL111004R2010 1SBL111004R2001 1SBL111004R1610 1SBL111004R1601 1SBL111004R2610 1SBL111004R2601 1SBL111004R2810 1SBL111004R2801 1SBL121004R2010 1SBL121004R2001 1SBL121004R1610 1SBL121004R1601 1SBL121004R2610 1SBL121004R2601 1SBL121004R2810 1SBL121004R2801 kg 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. mm, inches 72.5 2.85" AS09..S, AS12..S, AS16..S 6/4 | ABB 2x M4 8-32 UNC 35 1.38" ø 4.2 0.17" 50 1.97" 5.5 0.22" 10 0.39" 60 2.36" 7 0.28" 35 mm EN/IEC 60715 68 2.68" 45 1.77" 1SBC101454S0201 Main dimensions ASL09..S ... ASL16..S 3-pole contactors 4 to 7.5 kW DC operated - with spring terminals Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 20 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage use Uc rating (1) 600 V AC hp 5 A 12 V DC 24 48 110 220 5.5 22 7.5 12 24 48 110 220 7.5 22 10 15.2 24 48 110 220 Auxiliary Type contacts fitted Order code Weight Pkg (1 pce) kg 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 ASL09-30-10S-81 ASL09-30-01S-81 ASL09-30-10S-83 ASL09-30-01S-83 ASL09-30-10S-86 ASL09-30-01S-86 ASL09-30-10S-88 ASL09-30-01S-88 ASL12-30-10S-81 ASL12-30-01S-81 ASL12-30-10S-83 ASL12-30-01S-83 ASL12-30-10S-86 ASL12-30-01S-86 ASL12-30-10S-88 ASL12-30-01S-88 ASL16-30-10S-81 ASL16-30-01S-81 ASL16-30-10S-83 ASL16-30-01S-83 ASL16-30-10S-86 ASL16-30-01S-86 ASL16-30-10S-88 ASL16-30-01S-88 1SBL103004R8110 1SBL103004R8101 1SBL103004R8310 1SBL103004R8301 1SBL103004R8610 1SBL103004R8601 1SBL103004R8810 1SBL103004R8801 1SBL113004R8110 1SBL113004R8101 1SBL113004R8310 1SBL113004R8301 1SBL113004R8610 1SBL113004R8601 1SBL113004R8810 1SBL113004R8801 1SBL123004R8110 1SBL123004R8101 1SBL123004R8310 1SBL123004R8301 1SBL123004R8610 1SBL123004R8601 1SBL123004R8810 1SBL123004R8801 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 6 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. mm, inches 72.5 2.85" 7 0.28" 5.5 0.22" 10 0.39" 2x M4 8-32 UNC 35 1.38" ø 4.2 0.17" 60 2.36" 45 1.77" 1SBC101455S0201 Main dimensions 35 mm EN/IEC 60715 ASL09-30-10S ASL09..S ... ASL16..S contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with: –– spring terminals –– 3 main poles and 1 built-in auxiliary contact –– control circuit: low consumption (3 W at pull-in and holding) DC operated with solid core magnet. Suitable for direct control by PLC outputs (the polarity on the coil terminals A1+ and A2- must be respected) –– add-on auxiliary contact blocks for front mounting and comprehensive range of accessories. 68 2.68" 1SBC101011F0014 Description ASL09..S, ASL12..S, ASL16..S ABB | 6/5 AS09..S ... AS16..S 2-stack 3-pole contactors 4 to 7.5 kW AC operated - with spring terminals 1SBC101333F0014 Description AS09-30-32S AS09..S ... AS16..S contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with: –– spring terminals –– 1st stack with 3 main poles and 1 N.O. built-in auxiliary contact –– 2nd stack with permanently fixed 2 N.O. + 2 N.C. auxiliary contact block –– the auxiliary contact elements are mechanically linked (side-marked symbol) and the N.C. auxiliary contacts are mirror contacts –– control circuit: AC operated –– a comprehensive range of accessories. Ordering details 6 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 20 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage use Uc rating (1) 600 V AC hp 5 A 12 5.5 22 7.5 12 7.5 22 10 15.2 V 50 Hz V 60 Hz 24 230 400 24 230 400 24 230 400 24 120 230 400 24 120 230 400 24 120 230 400 Auxiliary Type contacts fitted 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 AS09-30-32S-20 AS09-30-32S-16 AS09-30-32S-26 AS09-30-32S-28 AS12-30-32S-20 AS12-30-32S-16 AS12-30-32S-26 AS12-30-32S-28 AS16-30-32S-20 AS16-30-32S-16 AS16-30-32S-26 AS16-30-32S-28 Order code Weight Pkg (1 pce) 1SBL101004R2032 1SBL101004R1632 1SBL101004R2632 1SBL101004R2832 1SBL111004R2032 1SBL111004R1632 1SBL111004R2632 1SBL111004R2832 1SBL121004R2032 1SBL121004R1632 1SBL121004R2632 1SBL121004R2832 kg 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. Main dimensions mm, inches 110.8 4.36" 72.5 2.85" 45 1.77" 10 0.39" 6/6 | ABB 1SBC101456S0201 AS09..S, AS12..S, AS16..S 5.5 0.22" 35.4 1.39" 35 mm EN/IEC 60715 68 2.68" 7 0.28" ASL09..S ... ASL16..S 2-stack 3-pole contactors 4 to 7.5 kW DC operated - with spring terminals Ordering details IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 20 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage use Uc rating (1) 600 V AC hp 5 A 12 5.5 22 7.5 12 7.5 22 10 15.2 Auxiliary Type contacts fitted Order code Weight Pkg (1 pce) 6 kg V DC 24 48 110 220 24 48 110 220 24 48 110 220 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 ASL09-30-32S-81 ASL09-30-32S-83 ASL09-30-32S-86 ASL09-30-32S-88 ASL12-30-32S-81 ASL12-30-32S-83 ASL12-30-32S-86 ASL12-30-32S-88 ASL16-30-32S-81 ASL16-30-32S-83 ASL16-30-32S-86 ASL16-30-32S-88 1SBL103004R8132 1SBL103004R8332 1SBL103004R8632 1SBL103004R8832 1SBL113004R8132 1SBL113004R8332 1SBL113004R8632 1SBL113004R8832 1SBL123004R8132 1SBL123004R8332 1SBL123004R8632 1SBL123004R8832 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. Main dimensions mm, inches 110.8 4.36" 72.5 2.85" 45 1.77" 10 0.39" 1SBC101457S0201 5.5 0.22" 35.4 1.39" 7 0.28" 35 mm EN/IEC 60715 ASL09-30-32S ASL09..S ... ASL16..S contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with: –– spring terminals –– 1st stack with 3 main poles and 1 N.O. built-in auxiliary contact –– 2nd stack with permanently fixed 2 N.O. + 2 N.C. auxiliary contact block –– the auxiliary contact elements are mechanically linked (side-marked symbol) and the N.C. auxiliary contacts are mirror contacts –– control circuit: low consumption (3 W at pull-in and holding) DC operated with solid core magnet. Suitable for direct control by PLC outputs (the polarity on the coil terminals A1+ and A2- must be respected) –– a comprehensive range of accessories. 68 2.68" 1SBC101335F0014 Description ASL09..S, ASL12..S, ASL16..S ABB | 6/7 AS09..S ... AS16..S and ASL09..S ... ASL16..S 3-pole contactors - with spring terminals Main accessories Contactor and main accessories (other accessories available) VM3 CA3..S AS..S ASL..S Contactors RV5, RC5-1 or RT5 6 CA3..S AS..S ASL..S Contactors Main accessory fitting details Contactor types Main poles Built-in auxiliary contacts Front-mounted accessories Auxiliary contact blocks Side-mounted accessories Mechanical interlock unit (between 2 contactors) 1-pole CA3..S 3 3 3 3 3 3 0 0 0 0 0 0 1 0 3 1 0 3 0 1 2 0 1 2 VM3 Surge suppressors 2 max. + 1 + RV5 or RC5-1 – 2 max. + 1 1 + + RV5 RV5 or RC5-1 or RT5 1 + RV5 or RT5 – 1SBC101412S0201 AS09..S ... AS16..S AS09..S ... AS16..S AS09..S … AS16..S ASL09..S ... ASL16..S ASL09..S ... ASL16..S ASL09..S … ASL16..S 6/8 | ABB AS09..S ... AS16..S and ASL09..S ... ASL16..S 3-pole contactors - with spring terminals Main accessories 1SBC101037F0014 Front-mounted instantaneous auxiliary contact blocks For contactors CA3-10S Auxiliary Type contacts Order code Pkg qty Weight (1 pce) CA3-10S CA3-01S 1SBN011019T1010 1SBN011019T1001 10 10 kg 0.011 0.011 For contactors Type Order code Pkg qty AS09..S … AS16..S, ASL09..S … ASL16..S VM3 1SBN031005T1000 10 1 0 1SBC101069F0014 AS09..S … AS16..S ASL09..S … ASL16..S 0 1 Mechanical interlock unit VM3 Weight (1 pce) kg 0.002 6 1SBC574001F0301 Surge suppressors For contactors AS09..S ... AS16..S, ASL09..S ... ASL16..S RV5 AS09..S ... AS16..S AC ● ● ● ● ● ● ● ● – – – – – DC ● ● ● ● – – – – ● ● ● ● ● Order code Pkg qty Weight (1 pce) RV5/50 RV5/133 RV5/250 RV5/440 RC5-1/50 RC5-1/133 RC5-1/250 RC5-1/440 RT5/32 RT5/65 RT5/90 RT5/150 RT5/264 1SBN050010R1000 1SBN050010R1001 1SBN050010R1002 1SBN050010R1003 1SBN050100R1000 1SBN050100R1001 1SBN050100R1002 1SBN050100R1003 1SBN050020R1000 1SBN050020R1001 1SBN050020R1002 1SBN050020R1003 1SBN050020R1004 2 2 2 2 2 2 2 2 2 2 2 2 2 kg 0.015 0.015 0.015 0.015 0.012 0.012 0.012 0.012 0.015 0.015 0.015 0.015 0.015 Order code Pkg qty 1SBN081020R1000 1 Connecting links with manual motor starters For contactors Manual motor starter Type AS09..S ... AS16..S ASL09..S ... ASL16..S MS116-0.16 ... MS116-16 BEA16-3U MS132-0.16 ... MS132-16 Weight (1 pce) kg 0.045 1SBC101412S0201 BEA16-3U V 24...50 50...133 110...250 250...440 24...50 50...133 110...250 250...440 12...32 25...65 50...90 77...150 150...264 Type 1SBC101384F0010 ASL09..S ... ASL16..S Rated control circuit voltage - Uc ABB | 6/9 AS09..S ... AS16..S and ASL09..S ... ASL16..S 3-pole contactors - with spring terminals Technical data Main pole - Utilization characteristics according to IEC Contactor types AS09..S AS12..S ASL09..S ASL12..S IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 690 V 50 / 60 Hz AS16..S ASL16..S 20 A 2.5 mm² 22 A 2.5 mm² 22 A 2.5 mm² 20 A 15 A 12 A 2.5 mm² 22 A 17 A 14 A 22 A 17 A 14 A 220-230-240 V 400 V 415 V 440 V 500 V 690 V 9 A 9 A 9 A 8 A 8 A 5 A 12 A 12 A 12 A 11 A 11 A 7 A 15.7 A 15.5 A 15.5 A 13.6 A 12.5 A 9 A 220-230-240 V 400 V 415 V 440 V 500 V 690 V 2.2 kW 3 kW 4 kW 5.5 kW 4 kW 5.5 kW 4 kW 5.5 kW 4 kW 5.5 kW 4 kW 5.5 kW 10 x Ie AC-3 acc. to IEC 60947-4-1 8 x Ie AC-3 acc. to IEC 60947-4-1 4 kW 7.5 kW 7.5 kW 7.5 kW 7.5 kW 7.5 kW 12 A 5.5 kW 16 A 7.5 kW 22 A 11 kW 250 A 124 A 75 A 55 A 22 A 250 A 124 A 75 A 55 A 22 A 1.1 W 0.33 W 1.1 W 0.55 W AC operated DC operated Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C With conductor cross-sectional area AC-1 Utilization category For air temperature close to contactor Ie / Rated operational current AC-1 Ue max. ≤ 690 V, 50/60 Hz With conductor cross-sectional area AC-3 Utilization category For air temperature close to contactor θ ≤ 60 °C Ie / Max. rated operational current AC-3 (1) M 3 3-phase motors Rated operational power AC-3 (1) M 3 1500 r.p.m. 50 Hz 1800 r.p.m. 60 Hz 3-phase motors Rated making capacity AC-3 Rated breaking capacity AC-3 AC-8a Utilization category (without thermal overload relay - Ue 400 V 50/60 Hz - θ ≤ 40 °C) Ie / Rated operational current AC-8a Rated operational power AC-8a Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded (2) Ue ≤ 500 V AC - gG type fuse Rated short-time withstand current Icw at 40 °C ambient temperature, in free air from a cold state Maximum breaking capacity cos φ = 0.45 Power dissipation per pole Max. electrical switching frequency 25 A 230 A 100 A 65 A 1 min 50 A 15 min 20 A 1 s 10 s 30 s at 440 V at 690 V Ie / AC-1 Ie / AC-3 AC-1 AC-3 AC-4 155 A 90 A 0.9 W 0.18 W 600 cycles/h 1200 cycles/h 300 cycles/h (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". (2) For the protection of motor starters against short circuits, see "Coordination with short-circuit protection devices". 1SBC101490S0201 6 θ ≤ 40 °C θ ≤ 60 °C θ ≤ 70 °C 6/10 | ABB AS09..S ... AS16..S and ASL09..S ... ASL16..S 3-pole contactors - with spring terminals Technical data Main pole - Utilization characteristics according to UL / NEMA / CSA Contactor types AC operated DC operated Standards Max. operational voltage NEMA size Thermal current NEMA continuous amp rating 115 V AC NEMA maximum horse power ratings 1-phase, 60 Hz NEMA maximum horse power ratings 3-phase, 60 Hz UL / CSA General use rating 600 V AC With conductor cross-sectional area UL / CSA maximum 1-phase motor rating Full load current Horse power rating UL / CSA maximum 3-phase motor rating Full load current (1) Horse power rating (1) 230 V AC 200 V AC 230 V AC 460 V AC 575 V AC 120 V AC 240 V AC 120 V AC 240 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC AS09..S ASL09..S UL 508, CSA C22.2 N°14 690 V 00 9 A 1/3 hp 1 hp 1-1/2 hp 1-1/2 hp 2 hp 2 hp AS12..S ASL12..S AS16..S ASL16..S 00 00 1/3 hp 1 hp 1-1/2 hp 1-1/2 hp 2 hp 2 hp 1/3 hp 1 hp 1-1/2 hp 1-1/2 hp 2 hp 2 hp 12 A AWG 14 12 A AWG 14 15.2 A AWG 12 7.2 A 8 A 1/3 hp 1 hp 9.8 A 10 A 1/2 hp 1-1/2 hp 13.8 A 12 A 3/4 hp 2 hp 7.8 A 6.8 A 7.6 A 9 A 2 hp 2 hp 5 hp 7-1/2 hp 7.8 A 9.6 A 11 A 11 A 2 hp 3 hp 7-1/2 hp 10 hp 11 A 15.2 A 14 A 11 A 3 hp 5 hp 10 hp 10 hp 40 A J 50 A 60 A 6 Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded Fuse rating Fuse type, 600 V Max. electrical switching frequency For general use For motor use 600 cycles/h 1200 cycles/h (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". General technical data AC operated DC operated Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Ambient air temperature close to contactor Operation Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency Shock withstand acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 C1 A A B1 B2 C2 Vibration withstand acc. to IEC 60068-2-6 AS09..S ASL09..S AS12..S ASL12..S AS16..S ASL16..S 690 V 600 V 6 kV -40...+70 °C -60...+80 °C Category B according to IEC 60947-1 Annex Q 3000 m 10 millions operating cycles 3600 cycles/h 1/2 sinusoidal shock for 11 ms: no change in contact position, closed or open position Shock direction A B1 B2 C1 C2 AS contactors - AC operated ASL contactors - DC operated 20 g 20 g 10 g closed position / 5 g open position 15 g 15 g 10 g 20 g closed position / 9 g open position 15 g 20 g closed position / 14 g open position 14 g 5...300 Hz / 3 g closed position / 2 g open position closed position / 10 g open position closed position / 5 g open position closed position / 8 g open position closed position / 8 g open position ABB | 6/11 1SBC101490S0201 Contactor types AS09..S ... AS16..S and ASL09..S ... ASL16..S 3-pole contactors - with spring terminals Technical data Magnet system characteristics for AS09..S … AS16..S contactors Contactor types Coil operating limits AC operated AS09..S AS12..S AS16..S AC supply acc. to IEC 60947-4-1 AC control voltage Rated control circuit voltage Uc at 50 Hz at 60 Hz Coil consumption Average pull-in value 50 Hz 60 Hz 50/60 Hz Average holding value 50 Hz 60 Hz 50/60 Hz Drop-out voltage Operating time Between coil energization and: Between coil de-energization and: 6 N.O. contact closing N.C. contact opening N.O. contact opening (1) N.C. contact closing (1) 0.85...1.1 x Uc (at θ ≤ 60 °C); Uc (at θ ≤ 70 °C) 24...415 V 24...415 V 33 VA 33 VA 33 VA 6.5 VA / 1.5 W 5 VA / 1.2 W 6.5 VA / 1.5 W Approx. 30...50 % of Uc 9...24 ms 6...18 ms 5...19 ms 7...22 ms (1) The use of RC5-1 surge suppressor increases opening time by a factor of 2 to 3. Magnet system characteristics for ASL09..S … ASL16..S contactors Contactor types Coil operating limits acc. to IEC 60947-4-1 DC control voltage Drop-out voltage Coil time constant DC operated ASL09..S ASL12..S ASL16..S DC supply 0.85...1.1 x Uc (at θ ≤ 60 °C); Uc (at θ ≤ 70 °C) Rated control circuit voltage Uc 12...240 V DC Average pull-in value 3 W Coil consumption Average holding value 3 W Approx. 10...40 % of Uc L/R 12 ms Open L/R 40 ms Closed Operating time Between coil energization and: Between coil de-energization and: N.O. contact closing N.C. contact opening N.O. contact opening (1) N.C. contact closing (1) 36...59 ms 31...53 ms 13...17 ms 15...20 ms (1) The use of RT5 surge suppressor increases opening time by a factor of 1.1 to 1.2 Mounting characteristics and conditions for use Contactor types AC operated DC operated AS09..S ASL09..S Mounting positions AS12..S ASL12..S Pos. 2 +30° AS16..S ASL16..S -30° Pos. 4 Pos. 3 Pos. 1 Pos. 5 The contactors can be assembled side by side. 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally 1SBC101490S0201 Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) Pos. 1 ± 30° 6/12 | ABB AS09..S ... AS16..S and ASL09..S ... ASL16..S 3-pole contactors - with spring terminals Technical data Connecting characteristics Contactor types AC operated DC operated AS09..S ASL09..S AS12..S ASL12..S AS16..S ASL16..S Main terminals Spring terminals Connection capacity (min. ... max.) Main conductors (poles) Rigid Flexible with non insulated ferrule Flexible with insulated ferrule Connection capacity acc. to UL / CSA Stripping length Auxiliary conductors (built-in auxiliary terminals + coil terminals) Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule Connection capacity acc. to UL / CSA Stripping length Degree of protection 1x 2x 1x 2x 1x 2x 1 or 2 x 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 0.75...1.5 mm² AWG 18...12 10 mm 1x 2x 1x 2x 1x 2x 1 or 2 x 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 0.75...1.5 mm² AWG 18...14 10 mm 6 acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 IP20 Flat Ø 3.5 1SBC101490S0201 All terminals Screwdriver type ABB | 6/13 AS09..S ... AS16..S and ASL09..S ... ASL16..S 3-pole contactors - with spring terminals Technical data Built-in auxiliary contacts according to IEC Contactor types AC operated DC operated Rated operational voltage Ue max. Rated frequency (without derating) Conventional free air thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 24-127 V 50/60 Hz 220-240 V 50/60 Hz 400-440 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz Making capacity AC-15 Breaking capacity AC-15 Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 6 Short-circuit protection device gG type fuse Rated short-time withstand current Icw 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC for 1.0 s for 0.1 s Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Non-overlapping time between N.O. and N.C. contacts Power dissipation per pole at 6 A Max. electrical switching frequency AC-15 DC-13 Mechanically linked contacts acc. to annex L of IEC 60947-5-1 Mirror contacts acc. to annex F of IEC 60947-4-1 AS09..S ASL09..S 690 V 50 / 60 Hz 10 A AS12..S ASL12..S AS16..S ASL16..S 6 A 4 A 3 A 2 A 2 A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.27 A / 60 W 0.27 A / 68 W 10 A 100 A 140 A 12 V / 3 m 10-7 1.5 ms 0.1 W 1200 cycles/h 900 cycles/h Built-in N.O. or N.C. auxiliary contacts and additional N.O. or N.C. auxiliary contacts (CA3 aux. contact blocks) are mechanically linked contacts. Built-in N.C. auxiliary contacts or additional N.C. auxiliary contacts (CA3 aux. contact blocks) are mirror contacts. Built-in auxiliary contacts according to UL / CSA Contactor types AS09..S ASL09..S 600 V AC, 250 V DC A600, Q300 10 A 7200 VA 720 VA 2.5 A 69 VA AS12..S ASL12..S AS16..S ASL16..S 1SBC101490S0201 Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking AC operated DC operated 6/14 | ABB Notes 1SBC101490S0201 6 ABB | 6/15 AS09..S ... AS16..S and ASL09..S ... ASL16..S 3-pole contactors - with spring terminals Electrical durability AS L0 A 9. AS S12 .S 16 ..S ..S , A , A SL SL 12 16 ..S ..S , AS 09 ..S Millions of operating cycles A AS SL0 16 9. ..S .S, , A AS SL 12 16 ..S ..S , A S L1 2. .S , Electrical durability for AC-1 utilization category - Ue ≤ 690 V Note: AC-1 maximum current is selected according to ambient temperature. Please see technical data. Switching non-inductive or slightly inductive loads. The breaking current Ic for AC-1 is equal to the rated operational current of the load. Maximum electrical switching frequency: 600 cycles / hour. 4 3 2 6 1 3 5 7 9 1 0.6 0.5 0.3 0.2 9 7 5 3 1 9 7 9 7 5 3 1 5 3 0.1 1 3 5 7 9 1 2 3 5 9 10 20 30 Breaking current Ic (A) 1SBC101946S0201 Example: Breaking current = 9 A. On the opposite curve at intersection " " 9 A the corresponding value for the electrical durability is approximately 0.6 millions operating cycles. 6/16 | ABB AS09..S ... AS16..S and ASL09..S ... ASL16..S 3-pole contactors - with spring terminals Electrical durability AS Millions of operating cycles 09 AS ..S 12 , A ..S SL , A 09 AS S ..S 16 ..S L12 ..S ,A SL 16 ..S Electrical durability for AC-3 utilization category - Ue ≤ 440 V - Ambient temperature ≤ 60 °C Switching cage motors: starting and switching off running motors. The breaking current Ic for AC-3 is equal to the rated operational current Ie (Ie = motor full load current). Maximum electrical switching frequency: 1200 cycles / hour. 10 5 3 9 7 5 3 1 2 6 9 7 5 3 1 1 0.5 0.3 0.2 1 2 3 4 5 10 3 5 7 9 20 Breaking current Ic (A) 1SBC101945S0201 Example: Breaking current = 4 A. On the opposite curve at intersection " " 4 A the corresponding value for the electrical durability is approximately 3 millions operating cycles. ABB | 6/17 AS09..S ... AS16..S 3-pole contactors - with spring terminals Terminal marking and positioning AS..S contactors - AC operated Standard devices without addition of auxiliary contacts 1L1 3L2 5L3 13 1L1 3L2 5L3 21 A1 NO NC NO NC 2T1 4T2 6T3 14 2T1 4T2 6T3 22 A2 AS09 ... AS16-30-10S 1L1 3L2 5L3 13 A1 A1 1L1 3L2 5L3 13 NO A2 2T1 4T2 6T3 NO 14 A2 AS09 ... AS16-30-01S AS09 ... AS16-30-10S A1 1L1 3L2 5L3 21 NC A2 2T1 4T2 6T3 NC 22 AS09 ... AS16-30-01S A1 NO 21NC 31NC 43NO 53NO NC NC NO NO 22NC 32NC 44NO 54NO NO 2T1 4T2 6T3 14 A1 1L1 3L2 5L3 13 NO 21 NC 31 NC 43 NO 53 NO A2 2T1 4T2 6T3 NO 14 NC 22 NC 32 NO 44 NO 54 A2 AS09 … AS16-30-32S AS09 ... AS16-30-32S Other possible contact combinations with auxiliary contact blocks added by the user 1L1 3L2 5L3 13 1L1 3L2 5L3 13 A1 NO A1 NO 21 2- -1 = NC 22 + 2- -2 NO 2T1 4T2 6T3 14 2T1 4T2 6T3 14 A2 = 21 33 NO 22 34 1L1 3L2 5L3 13 A1 + 3L2 5L3 13 NO 21 NC A2 2T1 4T2 6T3 NO 14 NC 22 CA3-01S Combination 11 A1 NO 2- 3- -1 = + 2- NO 2T1 4T2 6T3 14 1L1 A2 AS09 ... AS16-30-10S NO NC A1 NO Combination 11 1L1 3L2 5L3 13 NC 3- NC -3 + -2 NO -4 A1 1L1 3L2 5L3 13 NO 21 NC 33 NO A2 2T1 4T2 6T3 NO 14 NC 22 NO 34 NO 2T1 4T2 6T3 14 A2 Combination 21 = A2 AS09 ... AS16-30-10S + CA3-01S + CA3-10S Combination 21 CA3..S 1-pole auxiliary contact blocks -1 -3 -3 NO -1 NO NC -4 NC -2 -4 CA3-10S 6/18 | ABB -2 CA3-01S 1SBC101413S0201 6 ASL09..S ... ASL16..S 3-pole contactors - with spring terminals Terminal marking and positioning ASL..S contactors - DC operated (the polarity A1+, A2- must be respected) Standard devices without addition of auxiliary contacts 1L1 3L2 5L3 13 1L1 3L2 5L3 21 A1+ NO NC NO NC 2T1 4T2 6T3 14 A1+ 2T1 4T2 6T3 22 A2- ASL09 ... ASL16-30-10S A1+ 1L1 3L2 5L3 13 NO A2- 2T1 4T2 6T3 NO 14 A2- ASL09 ... ASL16-30-01S ASL09 ... ASL16-30-10S A1+ 1L1 3L2 5L3 21 NC A2- 2T1 4T2 6T3 NC 22 ASL09 ... ASL16-30-01S 1L1 3L2 5L3 13 A1+ NO 21NC 31NC 43NO 53NO NC NC NO NO 22NC 32NC 44NO 54NO NO 2T1 4T2 6T3 14 A1+ 1L1 3L2 5L3 13 NO 21 NC 31 NC 43 NO 53 NO A2- 2T1 4T2 6T3 NO 14 NC 22 NC 32 NO 44 NO 54 A2- ASL09 … ASL16-30-32 6 ASL09 ... ASL16-30-32S Other possible contact combinations with auxiliary contact blocks added by the user 1L1 3L2 5L3 13 1L1 3L2 5L3 13 A1+ NO A1+ NO 21 2- -1 = NC 22 + 2- -2 NO 2T1 4T2 6T3 14 = 21 33 NO 22 34 A2- ASL09 ... ASL16-30-10S + CA3-01S 1L1 3L2 5L3 13 A1+ NO NC 1L1 3L2 5L3 13 NO 21 NC A2- 2T1 4T2 6T3 NO 14 NC 22 Combination 11 A1+ NO 2- 3- -1 = + 2- NO 2T1 4T2 6T3 14 A1+ NO 2T1 4T2 6T3 14 A2- Combination 11 1L1 3L2 5L3 13 NC 3- NC -2 -3 + NO -4 A1+ 1L1 3L2 5L3 13 NO 21 NC 33 NO A2- 2T1 4T2 6T3 NO 14 NC 22 NO 34 NO 2T1 4T2 6T3 14 A2- Combination 21 = A2- ASL09 ... ASL16-30-10S + CA3-01S + CA3-10S Combination 21 CA3..S 1-pole auxiliary contact blocks -1 NO -1 NO NC -4 -2 -4 CA3-10S NC 1SBC101413S0201 -3 -3 -2 CA3-01S ABB | 6/19 AS09..S ... AS16..S 3-pole contactors - with spring terminals Main dimensions mm, inches 72.5 2.85" 2x M4 8-32 UNC 10 0.39" 5.5 0.22" 35 1.38" ø 4.2 0.17" 50 1.97" 68 2.68" 35 mm EN/IEC 60715 7 0.28" 60 2.36" 45 1.77" AS09..S, AS12..S, AS16..S 110.8 4.36" 10 0.39" 2x M4 8-32 UNC 5.5 0.22" 35.4 1.39" 68 2.68" 35 mm EN/IEC 60715 7 0.28" 35 1.38" ø 4.2 0.17" 50 1.97" 45 1.77" 60 2.36" 6 72.5 2.85" AS09..S, AS12..S, AS16..S + CA3..S front-mounted 1-pole auxiliary contact block 110.8 4.36" 10 0.39" 35.4 1.39" 35 mm EN/IEC 60715 68 2.68" 5.5 0.22" 35 1.38" ø 4.2 0.17" 50 1.97" 2x M4 8-32 UNC 7 0.28" 60 2.36" 72.5 2.85" 45 1.77" AS09...16-30-32S 6/20 | ABB 1SBC101414S0201 AS09..S, AS12..S, AS16..S + VM3 mechanical interlock unit including two BB3 fixing clips 80 3.15" ø 4.2 0.17" 50 1.97" 35 mm EN/IEC 60715 68 2.68" 5.5 0.22" 4x M4 8-32 UNC 60 2.36" 72.5 2.85" 7 0.28" 10 0.39" 90 3.54" ASL09..S ... ASL16..S 3-pole contactors - with spring terminals Main dimensions mm, inches 72.5 2.85" 45 1.77" 2x M4 8-32 UNC 10 0.39" 5.5 0.22" 35 1.38" ø 4.2 0.17" 60 2.36" 68 2.68" 35 mm EN/IEC 60715 7 0.28" ASL09..S, ASL12..S, ASL16..S 110.8 4.36" 10 0.39" 72.5 2.85" 2x M4 8-32 UNC 5.5 0.22" 35.4 1.39" 68 2.68" 35 mm EN/IEC 60715 7 0.28" 6 35 1.38" ø 4.2 0.17" 60 2.36" 45 1.77" ASL09..S, ASL12..S, ASL16..S + CA3..S front-mounted 1-pole auxiliary contact block 110.8 4.36" 72.5 2.85" 10 0.39" 2x M4 8-32 UNC 5.5 0.22" 35.4 1.39" 35 mm EN/IEC 60715 68 2.68" 7 0.28" 35 1.38" ø 4.2 0.17" 60 2.36" 45 1.77" ASL09...16-30-32S 72.5 2.85" 4x M4 8-32 UNC 5.5 0.22" 80 3.15" ø 4.2 0.17" 1SBC101414S0201 35 mm EN/IEC 60715 68 2.68" 10 0.39" 60 2.36" 7 0.28" 90 3.54" ASL09..S, ASL12..S, ASL16..S + VM3 mechanical interlock unit including two BB3 fixing clips ABB | 6/21 NS..S contactor relays - with spring terminals AC operated 1SBC101015F0014 Description NS22ES 6 NS..S contactor relays are used for switching auxiliary and control circuits. These contactor relays are designed with: –– spring terminals –– 4 poles or 8 poles. Contactor relays have mechanically linked auxiliary contact elements (side-marked symbol) –– control circuit: AC operated –– add-on auxiliary contact blocks for front mounting and a comprehensive range of accessories. Ordering details Number of contacts 1st stack A1 13 NO 21 NC 31 NC 43 NO A2 NO 14 NC 22 NC 32 NO 44 A1 13 NO 21 NC 33 NO 43 NO A2 NO 14 NC 22 NO 34 NO 44 Rated control circuit voltage Uc (1) 2nd stack A1 13 NO 23 NO 33 NO 43 NO A2 NO 14 NO 24 NO 34 NO 44 A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 V 50 Hz 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 24 230 400 V 60 Hz 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 24 120 230 400 Type NS22ES-20 NS22ES-16 NS22ES-26 NS22ES-28 NS31ES-20 NS31ES-16 NS31ES-26 NS31ES-28 NS40ES-20 NS40ES-16 NS40ES-26 NS40ES-28 NS44ES-20 NS44ES-16 NS44ES-26 NS44ES-28 NS53ES-20 NS53ES-16 NS53ES-26 NS53ES-28 NS62ES-20 NS62ES-16 NS62ES-26 NS62ES-28 NS71ES-20 NS71ES-16 NS71ES-26 NS71ES-28 NS80ES-20 NS80ES-16 NS80ES-26 NS80ES-28 Order code Weight 1SBH101004R2022 1SBH101004R1622 1SBH101004R2622 1SBH101004R2822 1SBH101004R2031 1SBH101004R1631 1SBH101004R2631 1SBH101004R2831 1SBH101004R2040 1SBH101004R1640 1SBH101004R2640 1SBH101004R2840 1SBH101004R2044 1SBH101004R1644 1SBH101004R2644 1SBH101004R2844 1SBH101004R2053 1SBH101004R1653 1SBH101004R2653 1SBH101004R2853 1SBH101004R2062 1SBH101004R1662 1SBH101004R2662 1SBH101004R2862 1SBH101004R2071 1SBH101004R1671 1SBH101004R2671 1SBH101004R2871 1SBH101004R2080 1SBH101004R1680 1SBH101004R2680 1SBH101004R2880 Pkg (1 pce) kg 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.220 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 0.260 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. mm, inches 110.8 4.36" 72.5 2.85" 6/22 | ABB 35 mm EN/IEC 60715 7 0.28" 5.5 0.22" NS44ES, NS53ES, NS62ES, NS71ES, NS80ES 1SBC101481S0201 NS22ES, NS31ES, NS40ES 68 2.68" 5.5 0.22" 72.5 2.85" 45 1.77" 7 0.28" 35 mm EN/IEC 60715 68 2.68" 45 1.77" 35.4 1.39" Main dimensions NSL..S contactor relays - with spring terminals DC operated 1SBC101021F0014 Description NSL..S contactor relays are used for switching auxiliary and control circuits. These contactor relays are designed with: –– spring terminals –– 4 poles or 8 poles. Contactor relays have mechanically linked auxiliary contact elements (side-marked symbol) –– control circuit: low coil consumption (3 W at pull-in and holding) DC operated with solid core magnet. Suitable for direct control by PLC outputs (the polarity on the coil terminals A1+ and A2- must be respected) –– add-on auxiliary contact blocks for front mounting and a comprehensive range of accessories. Ordering details Number of contacts 1st stack Rated control circuit voltage 2nd stack Type Order code Weight 1SBH103004R8122 1SBH103004R8322 1SBH103004R8622 1SBH103004R8822 1SBH103004R8131 1SBH103004R8331 1SBH103004R8631 1SBH103004R8831 1SBH103004R8140 1SBH103004R8340 1SBH103004R8640 1SBH103004R8840 1SBH103004R8144 1SBH103004R8344 1SBH103004R8644 1SBH103004R8844 1SBH103004R8153 1SBH103004R8353 1SBH103004R8653 1SBH103004R8853 1SBH103004R8162 1SBH103004R8362 1SBH103004R8662 1SBH103004R8862 1SBH103004R8171 1SBH103004R8371 1SBH103004R8671 1SBH103004R8871 1SBH103004R8180 1SBH103004R8380 1SBH103004R8680 1SBH103004R8880 Pkg (1 pce) kg 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.280 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 0.320 Uc (1) A1+ 13 NO 21 NC 31 NC 43 NO NO 14 NC 22 NC 32 NO 44 13 NO 21 NC 33 NO 43 NO NO 14 NC 22 NO 34 NO 44 13 NO 23 NO 33 NO 43 NO NO 14 NO 24 NO 34 NO 44 A1+ 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2- NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A2- NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 A2- A1+ A2- A1+ A2- V DC 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 24 48 110 220 NSL22ES-81 NSL22ES-83 NSL22ES-86 NSL22ES-88 NSL31ES-81 NSL31ES-83 NSL31ES-86 NSL31ES-88 NSL40ES-81 NSL40ES-83 NSL40ES-86 NSL40ES-88 NSL44ES-81 NSL44ES-83 NSL44ES-86 NSL44ES-88 NSL53ES-81 NSL53ES-83 NSL53ES-86 NSL53ES-88 NSL62ES-81 NSL62ES-83 NSL62ES-86 NSL62ES-88 NSL71ES-81 NSL71ES-83 NSL71ES-86 NSL71ES-88 NSL80ES-81 NSL80ES-83 NSL80ES-86 NSL80ES-88 6 Note: for multiple packaging, please contact your ABB local sales organization. (1) Other control voltages see voltage code table. mm, inches 110.8 4.36" 72.5 2.85" 5.5 0.22" 1SBC101482S0201 NSL22ES, NSL31ES, NSL40ES 7 0.28" 68 2.68" 35 mm EN/IEC 60715 7 0.28" 5.5 0.22" 72.5 2.85" 45 1.77" 35 mm EN/IEC 60715 45 1.77" 35.4 1.39" Main dimensions 68 2.68" NSL22ES NSL44ES, NSL53ES, NSL62ES, NSL71ES, NSL80ES ABB | 6/23 NS..S and NSL..S contactor relays - with spring terminals Main accessories Contactor relays and main accessories 4-pole contactor relay RV5, RC5-1 or RT5 NS..S NSL..S Contactor relays 8-pole contactor relay CA3..S RV5, RC5-1 or RT5 6 NS..S NSL..S Contactor relays Main accessory fitting details Contactor types Front-mounted accessories Auxiliary contact blocks Main poles Side-mounted accessories 1-pole CA3..S 2 3 4 4 5 6 7 8 2 3 4 4 5 6 7 8 2 1 0 4 3 2 1 0 2 1 0 4 3 2 1 0 E E E E E E E E E E E E E E E E 2 max. Surge suppressors + – 2 max. – + RV5 or RC5-1 RV5 or RC5-1 RV5 or RT5 RV5 or RT5 1SBC101415S0201 NS..S NS..S NS..S NS..S NS..S NS..S NS..S NS..S NSL..S NSL..S NSL..S NSL..S NSL..S NSL..S NSL..S NSL..S 6/24 | ABB NS..S and NSL..S contactor relays - with spring terminals Main accessories Front mounted instantaneous auxiliary contact blocks Auxiliary Type contacts NS..S, NSL..S 1SBC574001F0301 CA3-10S 1 0 0 1 Order code Pkg qty Weight (1 pce) CA3-10S CA3-01S 1SBN011019T1010 1SBN011019T1001 10 10 kg 0.011 0.011 Type Order code Pkg qty Surge suppressors For contactor relays Rated control circuit voltage - Uc Weight (1 pce) RV5 NS..S, NSL..S NS..S NSL..S V 24...50 50...133 110...250 250...440 24...50 50...133 110...250 250...440 12...32 25...65 50...90 77...150 150...264 AC ● ● ● ● ● ● ● ● – – – – – DC ● ● ● ● – – – – ● ● ● ● ● RV5/50 RV5/133 RV5/250 RV5/440 RC5-1/50 RC5-1/133 RC5-1/250 RC5-1/440 RT5/32 RT5/65 RT5/90 RT5/150 RT5/264 1SBN050010R1000 1SBN050010R1001 1SBN050010R1002 1SBN050010R1003 1SBN050100R1000 1SBN050100R1001 1SBN050100R1002 1SBN050100R1003 1SBN050020R1000 1SBN050020R1001 1SBN050020R1002 1SBN050020R1003 1SBN050020R1004 2 2 2 2 2 2 2 2 2 2 2 2 2 kg 0.015 0.015 0.015 0.015 0.012 0.012 0.012 0.012 0.015 0.015 0.015 0.015 0.015 6 1SBC101415S0201 1SBC101037F0014 For contactor relays ABB | 6/25 NS..S and NSL..S contactor relays - with spring terminals Technical data Contact utilization characteristics according to IEC Contactor relay types AC operated DC operated Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 24-127 V 50/60 Hz 220-240 V 50/60 Hz 400-440 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz Making capacity AC-15 Breaking capacity AC-15 Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 6 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC NS..S NSL..S IEC 60947-5-1 and EN 60947-5-1 690 V 50 / 60 Hz 10 A 6 A 4 A 3 A 2 A 2 A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.27 A / 60 W 0.27 A / 68 W Short-circuit protection device for contactors Ue ≤ 500 V AC - gG type fuse Rated short-time withstand current Icw at 40 °C ambient temperature,in free air from a cold state Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Non-overlapping time between N.O. and N.C. contacts Power dissipation per pole at 6 A Max. electrical switching frequency Mechanically linked contacts acc. to annex L of IEC 60947-5-1 10 A 100 A 140 A 12 V / 3 mA 10-7 1.5 ms 0.1 W AC-15 1200 cycles/h DC-13 900 cycles/h Built-in N.O. or N.C. auxiliary contacts and additional N.O. or N.C. auxiliary contacts (CA3..S aux. contact blocks) are mechanically linked contacts. for 1.0 s for 0.1 s Contact utilization characteristics according to UL / CSA Contactor relay types NS..S NSL..S UL 508, CSA C22.2 N°14 600 V AC, 250 V DC A600, Q300 10 A 7200 VA 720 VA 2.5 A 69 VA 1SBC101503S0201 Standards Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking AC operated DC operated 6/26 | ABB NS..S and NSL..S contactor relays - with spring terminals Technical data Magnet system characteristics for NS..S contactor relays Contactor relay types Coil operating limits AC operated acc. to IEC 60947-5-1 AC control voltage NS..S AC supply Rated control circuit voltage Uc at 50 Hz at 60 Hz Coil consumption Average pull-in value 50 Hz 60 Hz 50/60 Hz Average holding value 50 Hz 60 Hz 50/60 Hz Drop-out voltage Operating time Between coil energization and: Between coil de-energization and: N.O. contact closing N.C. contact opening N.O. contact opening (1) N.C. contact closing (1) 0.85...1.1 x Uc (at θ ≤ 60 °C); Uc (at θ ≤ 70 °C) 24...415 V 24...415 V 33 VA 33 VA 33 VA 6.5 VA / 1.5 W 5 VA / 1.2 W 6.5 VA / 1.5 W Approx. 30...50 % of Uc 9...24 ms 6...18 ms 5...19 ms 7...22 ms (1) The use of RC5-1 surge suppressor increases opening time by a factor of 2 to 3. 6 Magnet system characteristics for NSL..S contactor relays Contactor relay types Coil operating limits DC operated 0.85...1.1 x Uc (at θ ≤ 60 °C); Uc (at θ ≤ 70 °C) acc. to IEC 60947-5-1 DC control voltage Rated control circuit voltage Uc Coil consumption Average pull-in value Average holding value Drop-out voltage L/R Coil time constant Open L/R Closed Operating time N.O. contact closing Between coil energization and: Between coil de-energization and: NSL..S DC supply N.C. contact opening N.O. contact opening (1) N.C. contact closing (1) 12...240 V DC 3 W 3 W Approx. 10...40 % of Uc 12 ms 40 ms 36...59 ms 31...53 ms 13...17 ms 15...20 ms (1) The use of RT5 surge suppressor increases opening time by a factor of 1.1 to 1.2. Mounting characteristics and conditions for use Contactor relay types AC operated DC operated NS..S NSL..S Mounting positions Pos. 2 Pos. 4 Pos. 3 Pos. 1 Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) Pos. 5 The contactor relays can be assembled side by side. 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally 1SBC101503S0201 ABB | 6/27 NS..S and NSL..S contactor relays - with spring terminals Technical data General technical data Contactor relay types AC operated DC operated Rated insulation voltage Ui acc. to IEC 60947-5-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Ambient air temperature close to contactor relay Operation in free air Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency Shock withstand acc. to IEC 60068-2-27 and EN 60068-2-27 690 V 600 V 6 kV -40...+70 °C -60...+80 °C Category B according to IEC 60947-1 Annex Q 3000 m 20 millions operating cycles 3600 cycles/h 1/2 sinusoidal shock for 11 ms: no change in contact position, closed or open position Shock direction Mounting position 1 6 C1 A A B1 B2 C2 NS..S NSL..S A B1 B2 C1 C2 Vibration withstand acc. to IEC 60068-2-6 NS contactor relays - AC operated 20 g 5 g 15 g 19 g closed position / 8 g open position 16 g closed position / 13 g open position 5...300 Hz 3 g closed position / 2 g open position NSL contactor relays - DC operated 20 g closed position / 10 g open position 15 g closed position / 5 g open position 10 g 19 g closed position / 8 g open position 14 g closed position / 8 g open position Connecting characteristics Contactor relay types AC operated DC operated NS..S NSL..S Main terminals Spring terminals Connection capacity (min. ... max.) Pole and coil terminals Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule Connection capacity acc. to UL / CSA Stripping length Degree of protection 1x 2x 1x 2x 1x 2x 1 or 2 x 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 0.75...1.5 mm² AWG 18...14 10 mm acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 All terminals IP20 Flat Ø 3.5 1SBC101503S0201 Screwdriver type 6/28 | ABB Notes 1SBC101503S0201 6 ABB | 6/29 NS..S contactor relays - with spring terminals Terminal marking and positioning NS..S contactor relays - AC operated Standard devices without addition of auxiliary contact blocks 13 21 31 43 13 21 33 43 A1 NO NC NC NO 13 23 33 43 A1 NO NC NO NO 13 23 33 43 A1 NO NO NO NO A1 13 NO 21 NC 31 NC 43 NO A2 NO 14 NC 22 NC 32 NO 44 A1 NO NO NO NO 51 61 71 81 NS22ES A1 13 NO 21 NC 33 NO 43 NO A2 NO 14 NC 22 NO 34 NO 44 NS31ES NC NC NC NC 52 62 72 82 NO NC NC NO 14 22 32 44 NO NC NO NO 14 22 34 44 A2 NS22ES 14 24 34 44 A2 NS31ES 13 23 33 43 14 24 34 44 A2 NS40ES 13 23 33 43 A1 NO NO NO NO 13 23 33 43 A1 NS44ES NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO 53 61 71 81 53 61 71 83 53 61 73 83 53 63 73 83 NO NC NC NC NO NC NC NO NO NC NO NO NO NO NO NO 54 62 72 82 54 62 72 84 54 62 74 84 54 64 74 84 NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO 14 24 34 44 14 24 34 44 A2 NS53ES 14 24 34 44 A2 NS62ES 14 24 34 44 A2 NS71ES 13 NO 23 NO 33 NO 43 NO A2 NO 14 NO 24 NO 34 NO 44 NS40ES 13 23 33 43 A1 A1 A2 A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 NS44ES A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 A1 NS53ES A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 A2 NS80ES NS62ES NS71ES NS80ES Other possible contact combinations with auxiliary contact blocks added by the user 13 21 33 43 13 21 33 43 A1 NO NC NO NO 13 23 33 43 A1 NO NC NO NO 53 NO NO NO NO 5- = NO 54 + 5- NO NC NO NO 14 22 34 44 Combination 41E 13 23 33 43 14 22 34 44 = 51 61 NO NC NC -4 52 62 14 24 34 44 A2 + CA3-10S 53 = NO 54 + 5- NO NO NO NO -3 53 63 NO NO NO -4 54 64 NO NO NO NO 14 24 34 44 A2 Combination 50E = 14 24 34 44 NS40ES + CA3-10S 5- 6- -1 + 14 24 34 44 A2 = -1 + NC NC -2 A1 13 NO 21 NC 33 NO 43 NO 53 NO A2 NO 14 NC 22 NO 34 NO 44 NO 54 Combination 41E -2 A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 A2 NS40ES 13 23 33 43 A1 + CA3-01S + CA3-01S A1 Combination 42E A1 13 NO 23 NO 33 NO 43 NO 53 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO NO NO NO 5- 6- 5- 6- -3 = NO NO NO NO A2 6- NO NO NO NO NO NO NO NO 5- 5- = Combination 42E 13 23 33 43 A1 NO NO NO NO A1 NO NO NO NO NO NO NO NO NS31ES 13 23 33 43 A1 NO NO NO NO 14 24 34 44 -3 NO NC NO NO A2 13 23 33 43 A1 + NO -3 + NO -4 -4 NO NO NO NO 14 24 34 44 A2 Combination 60E = NS40ES Combination 50E A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 A2 + CA3-10S + CA3-10S Combination 60E CA3..S 1-pole auxiliary contact blocks -1 -3 -3 NO -1 NO NC -4 NC -2 -4 CA3-10S 6/30 | ABB -2 CA3-01S 1SBC101416S0201 6 NO NO NO NO NSL..S contactor relays - with spring terminals Terminal marking and positioning NSL..S contactor relays - DC operated (the polarity A1+, A2- must be respected) Standard devices without addition of auxiliary contact blocks A1+ 13 21 31 43 13 21 33 43 A1+ NO NC NC NO 13 23 33 43 A1+ NO NC NO NO 13 23 33 43 A1+ NO NO NO NO A1+ NO NO NO NO A2- 51 61 71 81 13 NO 21 NC 31 NC 43 NO NO 14 NC 22 NC 32 NO 44 A1+ A2- NSL22ES 13 NO 21 NC 33 NO 43 NO NO 14 NC 22 NO 34 NO 44 NSL31ES NC NC NC NC 52 62 72 82 NO NC NC NO 14 22 32 44 NO NC NO NO 14 22 34 44 A2- NO NO NO NO 14 24 34 44 A2- A1+ NO NO NO NO 14 24 34 44 A2- A2A2- NSL22ES NSL31ES 13 23 33 43 NSL40ES 13 23 33 43 A1+ NSL44ES 13 23 33 43 A1+ NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO 53 61 71 81 53 61 71 83 53 61 73 83 53 63 73 83 NO NC NC NC NO NC NC NO NO NC NO NO NO NO NO NO 54 62 72 82 54 62 72 84 54 62 74 84 54 64 74 84 NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO 14 24 34 44 14 24 34 44 A2- NSL53ES 14 24 34 44 A2- NSL62ES 14 24 34 44 A2- NSL71ES 23 NO 33 NO 43 NO NO 14 NO 24 NO 34 NO 44 NSL40ES 13 23 33 43 A1+ 13 NO 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A2- NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 NSL80ES 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2- NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 NSL62ES NSL53ES A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A2- 13 NO NSL44ES A1+ A1+ A1+ NSL71ES A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 6 NSL80ES Other possible contact combinations with auxiliary contact blocks added by the user 13 21 33 43 13 21 33 43 A1+ NO NC NO NO 13 23 33 43 A1+ NO NC NO NO 53 NO NO NO NO 5- = NO 54 + 5- NO NC NO NO 14 22 34 44 -3 51 61 NO NC NC -4 52 62 NO NC NO NO 14 22 34 44 A2- 13 23 33 43 A1+ NO NO NO NO 14 24 34 44 5- 6- 5- 6- -1 = NO NO NO NO A2- A1+ + NC -1 + NC -2 14 24 34 44 13 NO 21 NC 33 NO 43 NO 53 NO A2- NO 14 NC 22 NO 34 NO 44 NO 54 Combination 41E -2 A1+ NO NO NO NO A2- A1+ A2A2- Combination 41E 13 23 33 43 = NSL31ES 13 23 33 43 A1+ NO NO NO NO + = 54 + 5- NO NO NO NO -3 53 63 NO NO NO -4 54 64 NO NO NO NO 14 24 34 44 A2- Combination 50E = = 14 24 34 44 NSL40ES + CA3-10S + CA3-01S + CA3-01S A1+ 5- 6- 5- 6- -3 = + NO -3 + NO -4 14 24 34 44 Combination 60E = NSL40ES CA3-10S 43 NO 51 NC 61 NC NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 13 NO 23 NO 33 NO 43 NO 53 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 Combination 50E -4 A1+ 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO A2- NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 A2- + 33 NO A1+ NO NO NO NO A2- 23 NO Combination 42E NO NO NO NO NO NO NO NO A2- NS4L0ES 13 23 33 43 A1+ NO NO NO NO 5- NO Combination 42E 13 23 33 43 A1+ NO NO NO NO 53 14 24 34 44 CA3-10S 13 NO + CA3-10S Combination 60E CA3..S 1-pole auxiliary contact blocks -1 NO NC -4 NC -2 -4 CA3-10S 1SBC101416S0201 -1 -3 -3 NO -2 CA3-01S ABB | 6/31 NS..S contactor relays - with spring terminals Main dimensions mm, inches 4-pole contactor relays 72.5 2.85" 5.5 0.22" 60 2.36" 35 mm EN/IEC 60715 68 2.68" 2x M4 8-32 UNC 7 0.28" 35 1.38" ø 4.2 0.17" 50 1.97" 45 1.77" NS22ES, NS31ES, NS40ES 110.8 4.36" 2x M4 8-32 UNC 5.5 0.22" 35.4 1.39" 68 2.68" 35 mm EN/IEC 60715 7 0.28" 35 1.38" ø 4.2 0.17" 50 1.97" 45 1.77" 60 2.36" 6 72.5 2.85" NS22ES, NS31ES, NS40ES + CA3..S front-mounted 1-pole auxiliary contact block 8-pole contactor relays 110.8 4.36" 72.5 2.85" 35.4 1.39" 35 mm EN/IEC 60715 68 2.68" 5.5 0.22" 35 1.38" ø 4.2 0.17" 50 1.97" 2x M4 8-32 UNC 7 0.28" 60 2.36" 45 1.77" 1SBC101417S0201 NS44ES, NS53ES, NS62ES, NS71ES, NS80ES 6/32 | ABB NSL..S contactor relays - with spring terminals Main dimensions mm, inches 4-pole contactor relays 72.5 2.85" 45 1.77" 35 mm EN/IEC 60715 5.5 0.22" 35 1.38" ø 4.2 0.17" 60 2.36" 68 2.68" 2x M4 8-32 UNC 7 0.28" NSL22ES, NSL31ES, NSL40ES 110.8 4.36" 72.5 2.85" 2x M4 8-32 UNC 5.5 0.22" 35.4 1.39" 68 2.68" 35 mm EN/IEC 60715 7 0.28" 6 35 1.38" ø 4.2 0.17" 60 2.36" 45 1.77" NSL22ES, NSL31ES, NSL40ES + CA3..S front-mounted 1-pole auxiliary contact block 8-pole contactor relays 110.8 4.36" 72.5 2.85" 2x M4 8-32 UNC 5.5 0.22" 35.4 1.39" 35 mm EN/IEC 60715 35 1.38" ø 4.2 0.17" NSL44ES, NSL53ES, NSL62ES, NSL71ES, NSL80ES 1SBC101417S0201 68 2.68" 7 0.28" 60 2.36" 45 1.77" ABB | 6/33 Auxiliary contact blocks - with spring terminals Accessories 1SBC101037F0014 Description CA3-10S The auxiliary contact blocks are used for the operation of auxiliary circuits and control circuits. CA3 1-pole auxiliary contact blocks, designed for standard industrial environments, are equipped with: – – N.O. or N.C. contacts. – – spring-type connecting terminals. All 1-pole auxiliary contact blocks are protected against accidental direct contact and bear the corresponding function marking. A maximum of two 1-pole auxiliary contact blocks can be front-mounted on 1-stack contactors or 1-stack contactor relays. Ordering details For contactors For contactor relays Contact Type blocks Order code Pkg qty Weight (1 pce) kg 1-pole auxiliary contact blocks with spring terminals AS09..S ... AS16..S NS..S, NSL..S 1 – CA3-10S ASL09..S ... ASL16..S – 1 CA3-01S 6 Main dimensions 1SBN011019T1010 1SBN011019T1001 10 10 0.011 0.011 mm, inches 110.8 4.36" 5.5 0.22" 10 0.39" 1SBC101497S0201 35 mm EN/IEC 60715 68 2.68" 6/34 | ABB 7 0.28" 35.4 1.39" 72.5 2.85" 45 1.77" Auxiliary contact blocks - with spring terminals Front mounting Technical data 1-pole CA3..S Types Contact utilization characteristics according to IEC IEC 60947-5-1 and EN 60947-5-1 690 V 6 kV 690 V 10 A Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated impulse withstand voltage Uimp Rated operational voltage Ue max. Conventional thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 24-127 V 50/60 Hz 220-240 V 50/60 Hz 400-440 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz acc. to IEC 60947-5-1 Making capacity Breaking capacity Ie / Rated operational current DC-13 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.27 A / 60 W 0.27 A / 68 W 10 A for 1.0 s 100 A for 0.1 s 140 A 12 V / 3 mA 10-7 0.1 W 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw θ = 40 °C Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Power dissipation per pole at 6 A Mechanical durability Number of operating cycles Max. switching frequency Max. electrical switching frequency Mechanically linked contact 6 A 4 A 3 A 2 A 2 A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 acc. to annex L of IEC 60947-5-1 Mirror contacts acc. to annex F of IEC 60947-4-1 6 10 millions operating cycles 3600 cycles/h AC-15 1200 cycles/h AC-13 900 cycles/h Additional N.O. or N.C. auxiliary contacts (CA3..S aux. contact blocks) are mechanically linked contacts Additional N.C. auxiliary contacts (CA3..S aux. contact blocks) are mirror contacts Contact utilization characteristics according to UL / CSA UL 508, CSA C22.2 N°14 690 V AC, 250 V DC A600, Q300 10 A 7200 VA 720 VA 2.5 A 69 VA Standards Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking Connecting characteristics Flexible with non insulated ferrule Flexible with insulated ferrule Connection capacity acc. to UL / CSA Stripping length Degree of protection 1x 2x 1x 2x 1x 2x 1 or 2 x 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 0.75...1.5 mm² AWG 18…14 10 mm acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 IP20 Screw terminals All terminals Screwdriver type Spring terminals Flat Ø 3.5 1SBC101498S0201 Connection capacity (min. ... max.) Rigid solid ABB | 6/35 Auxiliary contact blocks for AS09..S ... AS16..S, ASL09..S ... ASL16..S contactors and NS, NSL contactor relays - with spring terminals Electrical durability Electrical durability for AC-15 utilization category - Ue ≤ 400 V AC-15 utilization category according to IEC 60947-5-1 / EN 60947-5-1: –– making current: 10 x Ie with cos ϕ = 0.7 and Ue – – breaking current: Ie with cos ϕ = 0.4 and Ue. This curve represents the electrical durability of the built-in or add-on auxiliary contacts in relation to the breaking current. The curve has been drawn for resistive and inductive loads up to 400 V: – – AS09..S ... AS16..S and ASL09..S ... ASL16..S contactor built-in auxiliary contacts –– 1-pole CA3..S –– NS..S and NSL..S contactor relays. Millions of operating cycles 30 20 10 5 3 2 1 0.5 0.3 0.2 1 0.1 0.02 0.05 0.1 0.2 0.3 0.5 1 3 1.3 5 7 9 2 3 4 5 6 10 Breaking current Ic (A) Example: Breaking current = 1.3 A On the opposite curve at intersection " " 1.3 A the corresponding value for the electrical durability is approximately 2 millions operating cycles. 1SBC101947S0201 6 6/36 | ABB Notes N12 6 ABB | 6/37 Surge suppressors for contactor coils Accessories Description (V) 1000 T (µs) 0 100 1000 0 100 The operation of inductive circuits causes overvoltages, in particular on opening the contactor coil. The electromagnetic energy stored in the coil during contactor closing is restored on opening in the form of surges, the slope and amplitude of which may rise to several kilovolts. A number of drawbacks are observed ranging from interference on the electronic devices to the breakdown of insulators and even the destruction of certain sensitive components. The graph opposite reproduces the oscillogram showing voltage discharges at the terminals of a 42 V / 50 Hz coil without peak clipping. The coil was switched by 8 series-connected poles of a contactor relay. Following a burst of discharges with a very steep slope, a damped oscillation emerges with a peak value of 3500 V. Overvoltage Factor The overvoltage factor k is defined as the ratio of the maximum overvoltage peak value Ûs to the peak value Ûc of the coil rated control voltage Uc: 1SBC101042F0014 Ûs max. k = Ûc k = 3500 ≈ 60 42 √2 To reduce the harmful effects of these overvoltages, ABB has developed a range of surge suppressors designed to reduce the k factor defined above and to limit or even completely eliminate the high pre-damping voltage frequencies. Each case is different, but the technical data tolerances and generous sizing of parts have enabled us to reduce the number of variants. We have chosen the following solutions: transil diodes, varistors and RC blocks. Note: A varistor is a resistor whose value decreases to a very large extent when a certain voltage is applied at its terminals. 1SBC101042F0014 RV5 Ordering details For contactors For contactor relays AS..S, ASL..S NS..S, NSL..S AS..S NS..S ASL..S NSL..S Rated control circuit voltage - Uc V 24...50 50...133 110...250 250...440 24...50 50...133 110...250 250...440 12...32 25...65 50...90 77...150 150...264 RT5 Main dimensions AC ● ● ● ● ● ● ● ● – – – – – Order code Pkg qty Weight (1 pce) RV5/50 RV5/133 RV5/250 RV5/440 RC5-1/50 RC5-1/133 RC5-1/250 RC5-1/440 RT5/32 RT5/65 RT5/90 RT5/150 RT5/264 1SBN050010R1000 1SBN050010R1001 1SBN050010R1002 1SBN050010R1003 1SBN050100R1000 1SBN050100R1001 1SBN050100R1002 1SBN050100R1003 1SBN050020R1000 1SBN050020R1001 1SBN050020R1002 1SBN050020R1003 1SBN050020R1004 2 2 2 2 2 2 2 2 2 2 2 2 2 kg 0.015 0.015 0.015 0.015 0.012 0.012 0.012 0.012 0.015 0.015 0.015 0.015 0.015 mm, inches 45 1.77" 68 2.68" 72.5 2.85"45 1.77" 68 2.68" 72.5 2.85" DC ● ● ● ● – – – – ● ● ● ● ● Type 45 1.77" Easy connection to the coil terminals (parallel mounting) Clip-on for both fixing and connection. No additional space Clipped onto the right side part of the contactor base without changing contactor overall dimensions and keeping a free access to coil terminals. 1SBC101499S0201 1SBC101042F0014 RC5-1 6/38 | ABB Ûs max. in AC k = Uc √2 For example the following is obtained for the above graph: 68 2.68" 6 Ûs max. in DC k = Uc Surge suppressors for contactor coils Technical data Varistor RV5/50 RV5/133 RV5/250 RV5/440 24...50 V AC 50...133 V AC 110...250 V AC 250...440 V AC 24...50 V DC 50...133 V DC 110...250 V DC 250...440 V DC 132 V AC 270 V AC 480 V AC 825 V AC 132 V DC 270 V DC 480 V DC 825 V DC none -20...+70 °C High energy absorption: good damping - Unpolarized system. Clipping as from Uvdr*, thus voltage front up to this point. *Uvdr = Varistor operating voltage (voltage dependent resistor), tolerance ± 10 %. Rated control circuit voltage Uc Residual overvoltage (clipping voltage) Opening time growth factor Operating temperature Advantages Drawback RC type RC5-1/50 RC5-1/133 RC5-1/250 RC5-1/440 24...50 V AC 50...133 V AC 110...250 V AC 250...440 V AC 2 to 3 x Uc max. 2...3 -20...+70 °C Very fast clipping - Attenuation of steep fronts and thus of high frequencies. Rated control circuit voltage Uc Residual overvoltage (clipping voltage) Opening time growth factor Operating temperature Advantages Transil diode RT5/32 RT5/65 RT5/90 RT5/150 12...32 V DC 25...65 V DC 50...90 V DC 77...150 V DC 50 V DC 100 V DC 150 V DC 210 V DC 1.1...1.2 -20...+70 °C Good energy absorption - Unpolarized system - Simple, reliable system. Delay on drop out which does not however reduce contactor breaking capacity. Rated control circuit voltage Uc Residual overvoltage (clipping voltage) Opening time growth factor Operating temperature Advantages Drawback 6 RT5/264 150...264 V DC 390 V DC Wiring diagrams RC type E0734D A2 A2 Transil diode 1SBC101602S0201 Varistor E0735D A2 A1 A1 E0733D A1 ABB | 6/39 Connecting links for starting solutions and other accessories Connecting links 1SBC101384F0010 The BEA16-3U insulated connecting links are used to connect an AS..S AC operated contactor or an ASL..S DC operated contactor with a manual motor starter. The connecting link ensure the electrical and mechanical connection between the contactor and the manual motor starter. BEA16-3U Manual motor starter Type AS09..S ... AS16..S ASL09..S ... ASL16..S MS116-0.16 ... MS116-16 BEA16-3U MS132-0.16 ... MS132-16 Order code Pkg qty 1SBN081020R1000 1 Weight (1 pce) kg 0.045 BDT4 test block is suitable for switching on contactor off-load. Marking on the block indicates the contactor type to fit with. Ordering details 1SNC160101F0014 BDT4 BA4 For contactors Test block 1SBC100043V0014 For contactors Type Order code Pkg qty AS..S, ASL..S, NS..S, NSL..S BDT4 1SBN110122T1000 10 Weight (1 pce) kg 0.007 Function markers Box of 16 blank cards (16 markers by card) printable on HTP500 thermal transfer printer and AMS 500 marking table to identify your contactors, overload relays or manual motor starters. Marker dimensions: 7 x 20 mm (.276" x .787"). Ordering details For contactors Type Order code Pkg qty AS..S, ASL..S, NS..S, NSL..S AMS 500 support plate for 8 BA4 HTP500 support plate BA4 SPRC 1 HTP500-BA4 1SNA235156R2700 1SNA360010R1500 1SNA235712R2400 16 1 1 Weight (1 pce) kg 0.011 0.220 0.290 1SBC101782S0201 6 Ordering details 6/40 | ABB Voltage code table The below tables indicate the available coil voltages and corresponding digits for order codes. When placing an order, please give either type or order code. Select a standard contactor from ordering detail pages. Change the coil voltage code in the type or in the order code according to the table below. Example: for contactor AS09-30-10S and coil 42 V 50/60 Hz, type is AS09-30-10S-21 and order code is 1SBL101004R2110. 3-pole contactors - with spring terminals Type Order code AS16 - 30 - 10 S - 26 1SBL121004R 26 10 N.O. N.C. Main contacts Contactor with spring terminal AS ASL Contactor type AC operated DC operated Contactor relays - with spring terminals Contactor with spring terminal Type NS 40 E S - 26 N.O. N.C. Number contacts NS NSL Contactor type AC operated DC operated Order code 1SBH101004R 26 40 AC coil code 50 Hz 60 Hz 20 24 V 24 V 21 42 V 42 V 22 48 V 48 V 23 110 V 110 V 24 115 V 115 V 16 – 120 V 25 220 V 220 V 26 230 V 230 V 27 240 V 240 V 17 – 277 V 13 380 V – 28 400 V 400 V 29 415 V 415 V AC coil code 50 Hz 60 Hz 20 24 V 24 V 21 42 V 42 V 22 48 V 48 V 23 110 V 110 V 24 115 V 115 V 16 – 120 V 25 220 V 220 V 26 230 V 230 V 27 240 V 240 V 17 – 277 V 13 380 V – 28 400 V 400 V 29 415 V 415 V 80 81 83 84 86 87 88 89 DC coil code 12 V 24 V 48 V 60 V 110 V 125 V 220 V 240 V 6 80 81 83 84 86 87 88 89 DC coil code 12 V 24 V 48 V 60 V 110 V 125 V 220 V 240 V 1SBC101621S0201 - Rev. A Auxiliary contacts N.O. N.C. ABB | 6/41 Summary_6-2 6 6/42 | ABB AF..S 3-pole contactors and NF..S contactor relays with spring terminals AF..S 3-pole contactors - with spring terminals Overview 6/44 1-stack contactors AF09..S … AF26..S AC / DC operated 6/46 AF09Z..S … AF26Z..S AC / DC operated - low consumption 6/47 2-stack contactors AF09..S … AF26..S AC / DC operated 6/48 AF09Z..S … AF26Z..S AC / DC operated - low consumption 6/49 Main accessories 6/50 Technical data 6/52 Electrical durability 6/57 Terminal marking and positioning 6/61 Main dimensions 6/62 6 NF..S contactor relays - with spring terminals Overview 6/66 4-pole contactor relays NF..S AC / DC operated 6/68 NFZ..S AC / DC operated - low consumption 6/69 8-pole contactor relays NF..S AC / DC operated 6/70 NFZ..S AC / DC operated - low consumption 6/71 Main accessories 6/72 Technical data 6/74 Terminal marking and positioning 6/77 Main dimensions 6/78 Accessories 6/80 Electronic timers - with spring terminals 6/84 Other accessories 6/87 Voltage code table 6/88 Summary_6-2 Auxiliary contact blocks - with spring terminals ABB | 6/43 3-pole contactors - with spring terminals Main accessories AF09..S ... AF16..S 3-pole contactors AF26..S 3-pole contactors 6 Main accessories for contactors AF..S contactor (without top mounted coil terminal block) AF..S contactor Fixing clips CAT4-11..S 2-pole auxiliary contact and A1/A2 coil terminal block AF..S contactor BX4-CA Protective cover VM4 TEF4S Electronic timer CA4..S 4-pole auxiliary contact block CAL4-11S 2-pole auxiliary contact block BX4 Protective cover CA4..S 1-pole auxiliary contact block 1SBC101677S0201 Top or bottom mounted coil terminal block BX4-CA Protective cover 6/44 | ABB 3-pole contactors - with spring terminals Spring terminals AC / DC Control voltage AF09..S AF12..S AF16..S AF26..S Switching of 3-phase cage motors Rated operational power 33 M 3 Rated operational current 400 V 4 kW 5.5 kW 7.5 kW 11 kW θ ≤ 60 °C 400 V 9A 12 A 18 A 26 A θ ≤ 60 °C 415 V 9A 12 A 18 A 26 A 7A 5 hp 9A 7.5 hp 10.5 A 10 hp 17 A – 00 0 – – IEC AC-3 UL/CSA 690 V θ ≤ 60 °C 440-480 V 3-phase motor rating NEMA size 6 Switching of resistive circuits 33 R R IEC UL/CSA θ ≤ 40 °C 690 V 22 A 24 A 24 A 35 A θ ≤ 60 °C 690 V 18 A 20 A 20 A 30 A 690 V θ ≤ 70 °C With conductor cross-sectional area 15 A 16 A 16 A 25 A 2.5 mm 2 20 A 2.5 mm 2 20 A 2.5 mm 2 20 A 4 mm 2 – AWG 12 AWG 12 AWG 12 – AC-1 Rated operational current General use rating 600 V AC With conductor cross-sectional area Main accessories Front mounting 1-pole CA4-10S or CA4-01S 4-pole CA4..S 2-pole CAT4-11..S (with coil front connection) Interlock Side mounting 2-pole CAL4-11S Mechanical VM4 Including 2 fixing clips Additional coil terminal block LDC4S Protective covers BX4 For all 1-stack contactors BX4-CA For 4-pole CA4..S and 2-pole CAT4..S auxiliary contact blocks 1SBC101677S0201 Auxiliary contact blocks ABB | 6/45 AF09..S ... AF26..S 3-pole contactors - with spring terminals 4 to 11 kW AC / DC operated 1SBC101099F0014 Description AF09-30-10S AF09..S ... AF26..S contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with 3 main poles: –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltage ranges covering 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening. –– built-in surge suppression –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. Ordering details 1SBC101100F0014 6 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 22 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage use Uc min. … Uc max. rating 600 V AC hp 5 A 20 AF26-30-00S 5.5 7.5 11 24 24 35 7.5 20 10 20 – – Auxiliary Type contacts fitted V 50/60 Hz 24...60 V DC - 48...130 48...130 100...250 100...250 250...500 250...500 24...60 - 48...130 48...130 100...250 100...250 250...500 250...500 24...60 - 48...130 48...130 100...250 100...250 250...500 250...500 24...60 48...130 100...250 250...500 (1) 48...130 100...250 250...500 (1) (1) (1) 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 0 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 0 AF09-30-10S-41 AF09-30-01S-41 AF09-30-10S-12 AF09-30-01S-12 AF09-30-10S-13 AF09-30-01S-13 AF09-30-10S-14 AF09-30-01S-14 AF12-30-10S-41 AF12-30-01S-41 AF12-30-10S-12 AF12-30-01S-12 AF12-30-10S-13 AF12-30-01S-13 AF12-30-10S-14 AF12-30-01S-14 AF16-30-10S-41 AF16-30-01S-41 AF16-30-10S-12 AF16-30-01S-12 AF16-30-10S-13 AF16-30-01S-13 AF16-30-10S-14 AF16-30-01S-14 AF26-30-00S-41 AF26-30-00S-12 AF26-30-00S-13 AF26-30-00S-14 Order code Weight Pkg (1 pce) 1SBL137004R4110 1SBL137004R4101 1SBL137004R1210 1SBL137004R1201 1SBL137004R1310 1SBL137004R1301 1SBL137004R1410 1SBL137004R1401 1SBL157004R4110 1SBL157004R4101 1SBL157004R1210 1SBL157004R1201 1SBL157004R1310 1SBL157004R1301 1SBL157004R1410 1SBL157004R1401 1SBL177004R4110 1SBL177004R4101 1SBL177004R1210 1SBL177004R1201 1SBL177004R1310 1SBL177004R1301 1SBL177004R1410 1SBL177004R1401 1SBL237004R4100 1SBL237004R1200 1SBL237004R1300 1SBL237004R1400 kg 0.270 0.270 0.270 0.270 0.270 0.270 0.310 0.310 0.270 0.270 0.270 0.270 0.270 0.270 0.310 0.310 0.270 0.270 0.270 0.270 0.270 0.270 0.310 0.310 0.320 0.320 0.320 0.360 (1) For 24...60 V 50/60 Hz - 20...60 V DC, use AF..-30-..S-11 (see voltage code table). AF..-30-..S-11 not suitable for direct control by PLC-output. mm, inches 86 3.38" 77 3.03" 45 1.77" 80 3.15" 45 1.77" 71 2.79" 5.5 0.22" 5.5 0.22" 10 0.39" AF09..S, AF12..S, AF16..S 6/46 | ABB 35 mm EN/IEC 60715 10 0.39" 82.5 3.24" 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" 5.5 0.22" 5.5 0.22" 10 0.39" AF26..S 1SBC101688S0201 - Rev. A Main dimensions AF09Z..S ... AF26Z..S 3-pole contactors - with spring terminals 4 to 11 kW AC / DC operated - low consumption 1SBC101099F0014 Description AF09Z-30-10S AF09Z..S ... AF26Z..S contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with 3 main poles: –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltage ranges covering 24...250 V 50/60 Hz and 12...250 V DC -- can manage large control voltage variations -- allow direct control by PLC-output ≥ 24 V DC 500 mA -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 22 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage use Uc min. … Uc max. rating 600 V AC hp 5 A 20 AF26Z-30-00S 5.5 7.5 11 24 24 35 7.5 20 10 20 – – V 50/60 Hz – V DC 12...20 24...60 20...60 48...130 48...130 100...250 100...250 – 12...20 24...60 20...60 48...130 48...130 100...250 100...250 – 12...20 24...60 20...60 48...130 48...130 100...250 100...250 – 24...60 48...130 100...250 12...20 20...60 48...130 100...250 Auxiliary Type contacts fitted 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 0 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0 0 0 AF09Z-30-10S-20 AF09Z-30-01S-20 AF09Z-30-10S-21 AF09Z-30-01S-21 AF09Z-30-10S-22 AF09Z-30-01S-22 AF09Z-30-10S-23 AF09Z-30-01S-23 AF12Z-30-10S-20 AF12Z-30-01S-20 AF12Z-30-10S-21 AF12Z-30-01S-21 AF12Z-30-10S-22 AF12Z-30-01S-22 AF12Z-30-10S-23 AF12Z-30-01S-23 AF16Z-30-10S-20 AF16Z-30-01S-20 AF16Z-30-10S-21 AF16Z-30-01S-21 AF16Z-30-10S-22 AF16Z-30-01S-22 AF16Z-30-10S-23 AF16Z-30-01S-23 AF26Z-30-00S-20 AF26Z-30-00S-21 AF26Z-30-00S-22 AF26Z-30-00S-23 Order code Weight Pkg (1 pce) 1SBL136004R2010 1SBL136004R2001 1SBL136004R2110 1SBL136004R2101 1SBL136004R2210 1SBL136004R2201 1SBL136004R2310 1SBL136004R2301 1SBL156004R2010 1SBL156004R2001 1SBL156004R2110 1SBL156004R2101 1SBL156004R2210 1SBL156004R2201 1SBL156004R2310 1SBL156004R2301 1SBL176004R2010 1SBL176004R2001 1SBL176004R2110 1SBL176004R2101 1SBL176004R2210 1SBL176004R2201 1SBL176004R2310 1SBL176004R2301 1SBL236004R2000 1SBL236004R2100 1SBL236004R2200 1SBL236004R2300 6 kg 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.360 0.360 0.360 0.360 Note: Only AF..Z..S contactors with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole. mm, inches 86 3.38" 77 3.03" 45 1.77" 80 3.15" 45 1.77" 71 2.79" 5.5 0.22" 5.5 0.22" 10 0.39" AF09Z..S, AF12Z..S, AF16Z..S 35 mm EN/IEC 60715 10 0.39" 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" 5.5 0.22" 5.5 0.22" 10 0.39" AF26Z..S ABB | 6/47 1SBC101709S0201 - Rev. A Main dimensions 82.5 3.24" 1SBC101100F0014 Ordering details AF09..S ... AF26..S 2-stack 3-pole contactors - with spring terminals 4 to 11 kW AC / DC operated 1SBC101101F0014 Description AF09-30-22S AF09..S ... AF26..S contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with 3 main poles (1st stack): –– 2nd stack with permanently fixed auxiliary contact block. The built-in auxiliary contact elements are mechanically linked (side-marked symbol) and the N.C. auxiliary contacts are mirror contacts –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC) only 4 control voltage ranges covering 24...500 V 50/60 Hz and 20...500 V DC -- can manage large control voltage variations -- reduced panel energy consumption -- very distinct closing and opening. –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details Rated control circuit General voltage use Uc min. … Uc max. rating 600 V AC hp 5 A 20 5.5 24 7.5 20 7.5 24 10 20 11 35 – – 1SBC101103F0014 AF26-30-22S V 50/60 Hz 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 V DC (1) 48...130 100...250 250...500 (1) 48...130 100...250 250...500 (1) 48...130 100...250 250...500 (1) - 48...130 48...130 100...250 100...250 250...500 250...500 Auxiliary Type contacts fitted 2 2 2 2 2 2 2 2 2 2 2 2 1 2 1 2 1 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 1 2 1 2 1 2 AF09-30-22S-41 AF09-30-22S-12 AF09-30-22S-13 AF09-30-22S-14 AF12-30-22S-41 AF12-30-22S-12 AF12-30-22S-13 AF12-30-22S-14 AF16-30-22S-41 AF16-30-22S-12 AF16-30-22S-13 AF16-30-22S-14 AF26-30-11S-41 AF26-30-22S-41 AF26-30-11S-12 AF26-30-22S-12 AF26-30-11S-13 AF26-30-22S-13 AF26-30-11S-14 AF26-30-22S-14 Order code Pkg (1 pce) kg 0.320 0.320 0.320 0.360 0.320 0.320 0.320 0.360 0.320 0.320 0.320 0.360 0.360 0.380 0.360 0.380 0.360 0.380 0.400 0.420 1SBL137004R4122 1SBL137004R1222 1SBL137004R1322 1SBL137004R1422 1SBL157004R4122 1SBL157004R1222 1SBL157004R1322 1SBL157004R1422 1SBL177004R4122 1SBL177004R1222 1SBL177004R1322 1SBL177004R1422 1SBL237004R4111 1SBL237004R4122 1SBL237004R1211 1SBL237004R1222 1SBL237004R1311 1SBL237004R1322 1SBL237004R1411 1SBL237004R1422 (1) For 24...60 V 50/60 Hz - 20...60 V DC, use AF..-30-..S-11 (see voltage code table). AF..-30-..S-11 not suitable for direct control by PLC-output. Main dimensions mm, inches 111 4.37" 45 1.77" 71 2.79" 113 4.45" 120 4.72" 10 0.39" 5.5 0.22" AF26..S 35 mm EN/IEC 60715 10 0.39" 82.5 3.24" 45 1.77" 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" AF09..S, AF12..S, AF16..S 5.5 0.22" AF26-30-11S AF26-30-22S 80 3.15" 45 1.77" 10 0.39" 5.5 0.22" 6/48 | ABB Weight 5.5 0.22" 45 1.77" AF26-30-11S UL/CSA 3-phase motor rating 480 V 1SBC101710S0201 - Rev. A 1SBC101102F0014 6 IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 22 AF09Z..S ... AF26Z..S 2-stack 3-pole contactors - with spring terminals 4 to 11 kW AC / DC operated - low consumption 1SBC101101F0014 Description AF09Z-30-22S AF09Z..S ... AF26Z..S contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are of the block type design with 3 main poles (1st stack): –– 2nd stack with permanently fixed auxiliary contact block. The built-in auxiliary contact elements are mechanically linked (side-marked symbol) and the N.C. auxiliary contacts are mirror contacts –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC), only 4 control voltage ranges covering 24...250 V 50/60 Hz and 12...250 V DC -- can manage large control voltage variations -- allow direct control by PLC-output ≥ 24 V DC 500 mA -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. IEC Rated operational power current θ ≤ 40 °C 400 V AC-3 AC-1 kW A 4 22 UL/CSA 3-phase motor rating 480 V Rated control circuit General voltage use Uc min. … Uc max. rating 600 V AC hp 5 A 20 5.5 24 7.5 20 7.5 24 10 20 11 35 – – AF26Z-30-22S V DC 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 24...60 20...60 48...130 48...130 100...250 100...250 Auxiliary Type contacts fitted 2 2 2 2 2 2 2 2 2 2 2 2 1 2 1 2 1 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 1 2 1 2 1 2 AF09Z-30-22S-20 AF09Z-30-22S-21 AF09Z-30-22S-22 AF09Z-30-22S-23 AF12Z-30-22S-20 AF12Z-30-22S-21 AF12Z-30-22S-22 AF12Z-30-22S-23 AF16Z-30-22S-20 AF16Z-30-22S-21 AF16Z-30-22S-22 AF16Z-30-22S-23 AF26Z-30-11S-20 AF26Z-30-22S-20 AF26Z-30-11S-21 AF26Z-30-22S-21 AF26Z-30-11S-22 AF26Z-30-22S-22 AF26Z-30-11S-23 AF26Z-30-22S-23 Order code Weight Pkg (1 pce) 6 kg 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.400 0.420 0.400 0.420 0.400 0.420 0.400 0.420 1SBL136004R2022 1SBL136004R2122 1SBL136004R2222 1SBL136004R2322 1SBL156004R2022 1SBL156004R2122 1SBL156004R2222 1SBL156004R2322 1SBL176004R2022 1SBL176004R2122 1SBL176004R2222 1SBL176004R2322 1SBL236004R2011 1SBL236004R2022 1SBL236004R2111 1SBL236004R2122 1SBL236004R2211 1SBL236004R2222 1SBL236004R2311 1SBL236004R2322 Note: Only AF..Z..S contactors with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole. mm, inches 111 4.37" 71 2.79" 80 3.15" 45 1.77" 10 0.39" 35 mm EN/IEC 60715 10 0.39" 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" AF09Z..S, AF12Z..S, AF16Z..S 10 0.39" 5.5 0.22" 5.5 0.22" 5.5 0.22" 113 4.45" 120 4.72" 5.5 0.22" AF26Z..S ABB | 6/49 1SBC101711S0201 - Rev. A 45 1.77" AF26-30-11S AF26-30-22S 45 1.77" Main dimensions 82.5 3.24" 1SBC101103F0014 AF26Z-30-11S V 50/60 Hz – 24...60 48...130 100...250 – 24...60 48...130 100...250 – 24...60 48...130 100...250 – 45 1.77" 1SBC101102F0014 Ordering details AF09..S ... AF26..S 3-pole contactors - with spring terminals Main accessories Contactor and main accessories (other accessories available) AF..S contactor (without top mounted coil terminal block) AF..S contactor Fixing clips CAT4-11..S 2-pole auxiliary contact and A1/A2 coil terminal block AF..S contactor BX4-CA Protective cover 6 VM4 TEF4S Electronic timer CA4..S 4-pole auxiliary contact block CAL4-11S 2-pole auxiliary contact block Top or bottom mounted coil terminal block BX4 Protective cover BX4-CA Protective cover CA4..S 1-pole auxiliary contact block Main accessory fitting details Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor types Built-in Front-mounted accessories auxiliary Auxiliary contact blocks contacts Main poles 1-pole CA4..S 2-pole CAT4-11..S 4-pole CA4..S Side-mounted accessories Auxiliary contact blocks Electronic timer Mechanical interlock unit (between 2 contactors) Left side TEF4S VM4 2-pole CAL4-11S Right side Max. N.C. built-in and add-on N.C. auxiliary contacts: 4 N.C. max. on positions 1, 2, 3, 4 and 3 N.C. max. on positions 1 ±30°, 5 0 0 1 AF09..S ... AF16..S 3 AF26..S 3 0 0 1 0 0 0 AF26..S 3 AF09..S ... AF26..S 3 0 0 1 2 1 2 4 2 3 4 2 3 – – max. max. max. max. max. max. or 1 – – or 1 or 1 – – – or 1 – – or 1 – – – – or 1 or 1 – or 1 or 1 – – – – – + 1 – – + 1 – – + + + + + + 1 1 1 1 1 1 1 1 – + 1 or 1 – + 1 or 1 + 1 – 1SBC101661S0201 AF09..S ... AF16..S 3 6/50 | ABB AF09..S ... AF26..S 3-pole contactors - with spring terminals Main accessories Ordering details (1) Auxiliary Type contacts 1SBC101110F0014 For contactors Pkg qty Weight (1 pce) kg CA4-10S Front-mounted instantaneous auxiliary contact blocks 1 1 0 0 2 3 2 3 4 1SBC101125F0014 AF09..S ... AF26..S CA4-22MS AF09 ... AF16..-30-10S 1SBC101113F0014 AF26..S 0 0 1 1 2 1 2 1 0 CA4-10S CA4-10S-T CA4-01S CA4-01S-T CA4-22MS CA4-31MS CA4-22ES CA4-31ES CA4-40ES 1SBN010119R1010 1SBN010119T1010 1SBN010119R1001 1SBN010119T1001 1SBN010145R1122 1SBN010145R1131 1SBN010145R1022 1SBN010145R1031 1SBN010145R1040 1 10 1 10 1 1 1 1 1 0.016 0.016 0.016 0.016 0.060 0.060 0.060 0.060 0.060 1SBN010130R1011 1 0.045 1 1 1 0.045 0.045 0.045 Pkg qty Weight (1 pce) Side-mounted instantaneous auxiliary contact blocks AF09..S ... AF26..S CAL4-11S 1 1 CAL4-11S 6 1SBC101117F0014 Front-mounted instantaneous auxiliary contact and A1/A2 coil terminal blocks CAT4-11ES AF09 ... AF16..-30-10S AF26..S AF09 ... AF16..-30-01S 1 1 1 CAT4-11MS 1SBN010153R1111 CAT4-11ES 1SBN010153R1011 CAT4-11US 1SBN010153R1311 Ordering details (1) Time delay range Delay type 1SBC101393F0014 selected by switch Rated control circuit voltage Uc Auxiliary Type contacts Order code V 50/60 Hz or DC kg Front-mounted electronic timer AF09..S ... AF26..S 1SBC101128F0014 TEF4S-OFF VM4 0.1...1 s 1...10 s 10...100 s ON-delay 24...240 1 1 TEF4S-ON 1SBN020113R1000 1 0.065 OFF-delay 24...240 1 1 TEF4S-OFF 1SBN020115R1000 1 0.065 Type Pkg qty Weight (1 pce) 1SBC101135F0014 Ordering details (1) 1SBC101136F0014 For contactors LDC4S 1 1 1 Note: CAT4 not fittable on AF..Z contactors with DC control voltage 12…20 V DC. For contactors 1SBC101138F0014 Order code Order code kg Mechanical interlock unit AF09..S ... AF26..S VM4 1SBN030105T1000 10 0.005 LDC4S 1SBN070157T1000 10 0.010 BX4 BX4-CA 1SBN110108T1000 1SBN110109W1000 10 50 0.006 0.001 Note: VM4 includes 2 fixing clips (BB4) to maintain together both contactors. BX4 Additional coil terminal block AF09..S ... AF26..S BX4-CA Protective covers All 1-stack contactors For 4-pole CA4..S and 2-pole CAT4..S auxiliary contact blocks 1SBC101703S0201 - Rev. A (1) See "Main accessory fitting details" table. Note: Following accessories can be used on 3-pole contactors AF09 ... AF96 with screw terminals : - 1 or 4-pole CA4...S auxiliary contact blocks - 2-pole CAL4-11S auxiliary contact blocks - TEF4S electronic timer - LDC4S coil terminal block. ABB | 6/51 AF09..S ... AF26..S 3-pole contactors - with spring terminals Technical data Main pole - Utilization characteristics according to IEC Contactor types Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith AF09..S AF12..S AF16..S IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1 690 V 50/60 Hz AF26..S 24 A 2.5 mm² 24 A 2.5 mm² 24 A 2.5 mm² 35 A 4 mm² 22 A 18 A 15 A 2.5 mm² 24 A 20 A 16 A 2.5 mm² 24 A 20 A 16 A 2.5 mm² 35 A 30 A 25 A 4 mm² 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 9A 9A 9A 9A 9.5 A 7A 12 A 12 A 12 A 12 A 12.5 A 9A 18 A 18 A 18 A 18 A 15 A 10.5 A 26 26 26 26 23 17 220-230-240 V 380-400 V 415 V 440 V 500 V 690 V 2.2 kW 3 kW 4 kW 5.5 kW 4 kW 5.5 kW 4 kW 5.5 kW 5.5 kW 7.5 kW 5.5 kW 7.5 kW 10 x Ie AC-3 acc. to IEC 60947-4-1 8 x Ie AC-3 acc. to IEC 60947-4-1 4 kW 7.5 kW 9 kW 9 kW 9 kW 9 kW 6.5 kW 11 kW 11 kW 15 kW 15 kW 15 kW 12 A 5.5 kW 16 A 7.5 kW 22 A 11 kW 30 A 15 kW 25 A 300 A 150 A 80 A 60 A 24 A 25 A 300 A 150 A 80 A 60 A 24 A 40 A 700 A 350 A 225 A 150 A 35 A 250 A 106 A 1.1 W 0.3 W 250 A 106 A 1.1 W 0.6 W 500 A 200 A 1.8 W 1W AC / DC operated acc. to IEC 60947-4-1, open contactors, θ ≤ 40 °C With conductor cross-sectional area AC-1 Utilization category For air temperature close to contactor Ie / Rated operational current AC-1 Ue max. ≤ 690 V, 50/60 Hz θ ≤ 40 °C θ ≤ 60 °C θ ≤ 70 °C With conductor cross-sectional area AC-3 Utilization category For air temperature close to contactor θ ≤ 60 °C Ie / Max. rated operational current AC-3 (1) M 3 3-phase motors A A A A A A Rated operational power AC-3 (1) M 3 1500 r.p.m. 50 Hz 1800 r.p.m. 60 Hz 3-phase motors Rated making capacity AC-3 Rated breaking capacity AC-3 AC-8a Utilization category (without thermal overload relay - Ue 400 V 50/60 Hz - θ ≤ 40 °C) Ie / Rated operational current AC-8a Rated operational power AC-8a Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded (2) Ue ≤ 500 V AC - gG type fuse Rated short-time withstand current Icw at 40 °C ambient temperature, in free air from a cold state Maximum breaking capacity cos φ = 0.45 Power dissipation per pole Max. electrical switching frequency 25 A 300 A 150 A 80 A 1 min 60 A 15 min 24 A 1 s 10 s 30 s at 440 V at 690 V Ie / AC-1 Ie / AC-3 AC-1 AC-3 AC-2, AC-4 250 A 106 A 0.9 W 0.15 W 600 cycles/h 1200 cycles/h 300 cycles/h 150 cycles/h (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". (2) For the protection of motor starters against short circuits, see "Coordination with short-circuit protection devices". 1SBC101689S0201 - Rev. A 6 6/52 | ABB AF09..S ... AF26..S 3-pole contactors - with spring terminals Technical data Main pole - Utilization characteristics according to UL / NEMA / CSA AC / DC operated Contactor types Standards Max. operational voltage NEMA size Thermal current NEMA continuous amp rating 115 V AC NEMA maximum horse power ratings 1-phase, 60 Hz NEMA maximum horse power ratings 3-phase, 60 Hz UL / CSA General use rating 600 V AC With conductor cross-sectional area UL / CSA maximum 1-phase motor rating Full load current Horse power rating UL / CSA maximum 3-phase motor rating Full load current (1) Horse power rating (1) 230 V AC 200 V AC 230 V AC 460 V AC 575 V AC 120 V AC 240 V AC 120 V AC 240 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC 200-208 V AC 220-240 V AC 440-480 V AC 550-600 V AC AF09..S AF12..S UL 508, CSA C22.2 N°14 690 V 00 0 9A 18 A 1/3 hp 1 hp 1 hp 2 hp 1-1/2 hp 3 hp 1-1/2 hp 3 hp 2 hp 5 hp 2 hp 5 hp AF16..S AF26..S – – – – – – – – – – – – – – – – – 20 A AWG 12 20 A AWG 12 20 A AWG 12 – – 13.8 A 10 A 3/4 hp 1 1/2 hp 16 A 12 A 1 hp 2 hp 16 A 12 A 1 hp 2 hp – – – – 7.8 A 6.8 A 7.6 A 9A 2 hp 2 hp 5 hp 7.5 hp 11 A 9.6 A 11 A 11 A 3 hp 3 hp 7.5 hp 10 hp 11 A 15.2 A 14 A 11 A 3 hp 5 hp 10 hp 10 hp – – – – – – – – 30 J 30 J 60 J – – 600 cycles/h 1200 cycles/h 600 cycles/h 1200 cycles/h 600 cycles/h 1200 cycles/h – – 6 Short-circuit protection device for contactors without thermal overload relay - Motor protection excluded Fuse rating Fuse type, 600 V Max. electrical switching frequency For general use For motor use (1) For the corresponding kW/A or hp/A values of 1500 r.p.m, 50 Hz or 1800 r.p.m, 60 Hz, 3-phase motors, see "Motor rated operational powers and currents". General technical data acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 C1 A A B1 B2 C2 Vibration withstand acc. to IEC 60068-2-6 AC / DC operated AF09..S AF12..S AF16..S 690 V 600 V 6 kV Devices complying with IEC 60947-1 / EN 60947-1 - Environment A AF26..S – -40...+70 °C -60...+80 °C Category B according to IEC 60947-1 Annex Q 3000 m 10 millions operating cycles 3600 cycles/h Shock direction A B1 B2 C1 C2 1/2 sinusoidal shock for 11 ms: no change in contact position, closed or open position 30 g 25 g closed position / 5 g open position 15 g 25 g 25 g 5...300 Hz 4 g closed position / 2 g open position ABB | 6/53 1SBC101689S0201 - Rev. A Contactor types Rated insulation voltage Ui acc. to IEC 60947-4-1 acc. to UL / CSA Rated impulse withstand voltage Uimp. Electromagnetic compatibility Ambient air temperature close to contactor Operation without thermal overload relay Storage Climatic withstand Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency Shock withstand AF09..S ... AF26..S 3-pole contactors - with spring terminals Technical data Magnet system characteristics Contactor types Coil operating limits AC / DC operated AC supply acc. to IEC 60947-4-1 AF09..S AF12..S At θ ≤ 60 °C 0.85 x Uc min...1.1 x Uc max. At θ ≤ 70 °C 0.85 x Uc min...Uc max. AF16..S AF26..S At θ ≤ 60 °C 0.85 x Uc min...1.1 x Uc max. At θ ≤ 70 °C (AF) 0.85 x Uc min...Uc max. - (AF..Z) 0.85 x Uc min...1.1 x Uc max. AC control voltage Rated control circuit voltage Uc 24...500 V AC Average pull-in value (AF) 50 VA - (AF..Z) 16 VA 50/60 Hz Coil consumption Average holding value (AF) 2.2 VA / 2 W - (AF..Z) 1.7 VA / 1.5 W DC control voltage Rated control circuit voltage Uc 12...500 V DC Average pull-in value (AF) 50 W - (AF..Z) 12...16 W Coil consumption Average holding value (AF) 2 W - (AF..Z) 1.7 W PLC-output control (AF..Z) ≥ 500 mA 24 V DC Drop-out voltage ≤ 60 % of Uc min. Voltage sag immunity (AF..Z) conditions of use on request DC supply acc. to SEMI F47-0706 (AF..Z) 22 ms average for Uc ≥ 24 V 50/60 Hz or Uc ≥ 20 V DC Dips withstand -20 °C ≤ θ ≤ +60°C Operating time Between coil energization and: Between coil de-energization and: N.O. contact closing N.C. contact opening N.O. contact opening N.C. contact closing 40...95 38...90 11...95 13...98 ms ms ms ms Mounting characteristics and conditions for use Contactor types Mounting positions AC / DC operated AF09..S AF12..S Pos. 2 +30° AF16..S AF26..S -30° Pos. 4 Pos. 3 Pos. 1 Pos. 1 ± 30° Pos. 5 Max. N.C. built-in and add-on N.C. auxiliary contacts: see accessory fitting details for a 3-pole contactor AF09..S ... AF26..S Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) The contactors can be assembled side by side 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally 1SBC101689S0201 - Rev. A 6 6/54 | ABB AF09..S ... AF26..S 3-pole contactors - with spring terminals Technical data Connecting characteristics Contactor types Main terminals AC / DC operated AF09..S AF12..S AF16..S AF26..S Spring terminals Connection capacity (min. ... max.) Main conductors (poles) Rigid Solid (≤ 4 mm²) Flexible with non insulated ferrule Flexible with insulated ferrule Connection capacity acc. to UL/CSA Stripping length Auxiliary conductors (built-in auxiliary terminals + coil terminals) Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule Connection capacity acc. to UL/CSA Stripping length Degree of protection 1x 2x 1x 2x 1x 2x 1 or 2 x 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 0.75...1.5 mm² AWG 18...12 10 mm 1x 2x 1x 2x 1x 2x 1 or 2 x 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 0.75...1.5 mm² AWG 18...14 10 mm 1.5...4 mm² 1.5...4 mm² 1.5...4 mm² 1.5...4 mm² 1.5...4 mm² 1.5...4 mm² – 14 mm 6 – acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screwdriver type IP20 IP20 IP20 Flat Ø 3.5 1SBC101689S0201 - Rev. A Main terminals Coil terminals Built-in auxiliary terminals ABB | 6/55 AF09..S ... AF26..S 3-pole contactors - with spring terminals Technical data Built-in auxiliary contacts according to IEC AC / DC operated Contactor types Rated operational voltage Ue max. Rated frequency (without derating) Conventional free air thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 24-127 V 50/60 Hz 220-240 V 50/60 Hz 400-440 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz Making capacity AC-15 Breaking capacity AC-15 Ie / Rated operational current DC-13 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC 400 V DC 500 V DC 600 V DC acc. to IEC 60947-5-1 6 Short-circuit protection device gG type fuse Rated short-time withstand current Icw for 1.0 s for 0.1 s Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Non-overlapping time between N.O. and N.C. contacts Power dissipation per pole at 6 A Max. electrical switching frequency AC-15 DC-13 Mechanically linked contacts (according to annex L of IEC 60947-5-1) Mirror contacts (according to annex F of IEC 60947-4-1) AF09..S 690 V 50/60 Hz 16 A AF12..S AF16..S AF26..S 6A 4A 3A 2A 2A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.27 A / 60 W 0.27 A / 68 W 0.15 A / 60 W 0.13 A / 65 W 0.1 A / 60 W 10 A 100 A 140 A 12 V / 3 mA 10-7 ≥ 2 ms 0.1 W 1200 cycles/h 900 cycles/h Built-in N.O. or N.C. auxiliary contacts and additional N.O. or N.C. auxiliary contacts (CA4..S, CAL4..S, CAT4..S aux. contact blocks) are mechanically linked contacts. Built-in N.C. auxiliary contacts or additional N.C. auxiliary contacts (CA4..S, CAL4..S, CAT4..S aux. contact blocks) are mirror contacts. Built-in auxiliary contacts according to UL / CSA AC / DC operated AF09..S 600 V AC, 600 V DC A600, Q600 10 A 7200 VA 720 VA 2.5 A 69 VA AF12..S AF16..S AF26..S – – – – – – – 1SBC101689S0201 - Rev. A Contactor types Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking 6/56 | ABB AF09..S ... AF26..S 3-pole contactors - with spring terminals Contactor electrical durability and utilization categories General Utilization categories determine the current making and breaking conditions relating to the characteristics of the loads to be controlled by the contactors. International standard IEC 60947-4-1 and European standard EN 60947-4-1 are the standards to be referred to. If Ic is the current to be broken by the contactor and Ie the rated operational current normally drawn by the load, then: –– Categories AC-1 and AC-3: Ic = Ie –– Category AC-2: Ic = 2.5 x Ie –– Category AC-4: Ic = 6 x Ie Generally speaking Ic = m x Ie where m is a multiple of the load operational current. On next pages, the curves corresponding to categories AC-1, AC-3, AC-2 and AC-4 represent the electrical durability variation of standard contactors in relation to the breaking current Ic. Electrical durability is expressed in millions of operating cycles. Curve utilization mode Electrical durability forecast and contactor selection for categories AC-1, AC-2, AC-3 or AC-4 • Note the characteristics of the load to be controlled: –– Operational voltage ........................................................................... Ue –– Current normally drawn ..................................................................... Ie (Ue / Ie / kW relation for motors, see "Motor rated operational powers and currents"). –– Utilization category ............................................................................ AC-1, AC-2, AC-3 or AC-4 –– Breaking current ................................................................................ Ic = Ie for AC-1 and for AC-3 ; Ic = 2.5 x Ie for AC-2 ; Ic = 6 x Ie for AC-4 • Define the number of operating cycles N required. • On the diagram corresponding to the operational category, select the contactor with the curve immediately above the intersection point (Ic ; N). 6 Electrical durability forecast and contactor selection for mixed duty motor control: AC-3 (Ic = Ie) type switching off while "motor running" and, occasionally, AC-4 (Ic = 6 x Ie) type switching off while "motor accelerating" • Note the characteristics of the motor to be controlled: –– Operational voltage ........................................................................... Ue –– Current normally drawn while "motor running" .................................. Ie (Ue / Ie / kW relation for motors, see "Motor rated operational powers and currents") –– Breaking current for AC-3 .................................................................. Ic = Ie –– Breaking current for AC-4 while "motor accelerating" ........................ Ic = 6 x Ie –– Percentage of AC-4 operating cycles ................................................ K (on the basis of the total number of operating cycles) • Define the total number of operating cycles N required. • Note the smallest contactor rating compatible for AC-3 (Ue / Ie) on Main pole utilization characteristic table (see “Technical data”). • For the selected contactor make a note of the following in relation to the voltage using diagram AC-3 in next pages: –– The number of operating cycles A for Ic = Ie (AC-3) –– The number of operating cycles B for Ic = 6 x Ie (AC-4) • Calculate the estimated number of cycles N’ (N’ is always below A) A 1 + 0.01 K (A/B - 1) N'= • If N' is too low in relation to the target N, calculate the estimated number of cycles for a higher contactor rating. Case of uninterrupted duty 1SBC101933S0201 For uninterrupted duty, some verifications of preventing maintenance are necessary to check the functionality of the concerned product (consult us). The combinated effect of environmental conditions and the proper temperature of the product may require some disposals. As a matter of fact, for this duty, the use duration prevails over the number of operating cycles. ABB | 6/57 AF09..S ... AF26..S 3-pole contactors - with spring terminals Electrical durability Millions of operating cycles ..S 26 AF . AF .S 16 ..S 12 AF AF 09 ..S Electrical durability for AC-1 utilization category - Ue ≤ 690 V. Ambient temperature ≤ 60 °C Switching non-inductive or slightly inductive loads. The breaking current Ic for AC-1 is equal to the rated operational current of the load. Maximum electrical switching frequency: see "Technical data". 10 5 3 9 7 5 3 1 2 9 7 5 6 3 1 1 0.5 0.3 9 7 5 3 1 0.2 1 3 5 7 9 1 0.1 2 3 5 3 5 7 10 9 20 1 3 5 79 30 50 100 Breaking current Ic (A) 1SBC101934S0201 AF09..S … AF26..S 3-pole contactors AC-1 electrical durability 6/58 | ABB AF09..S ... AF26..S 3-pole contactors - with spring terminals Electrical durability Electrical durability for AC-3 utilization category Switching cage motors: starting and switching off running motors. The breaking current Ic for AC-3 is equal to the rated operational current Ie (Ie = motor full load current). Maximum electrical switching frequency: see "Technical data". Millions of operating cycles ..S ..S 26 AF AF 16 ..S 12 AF AF 09 ..S AC-3 - Ue ≤ 440 V - Ambient temperature ≤ 60 °C 10 5 3 9 7 5 3 1 2 9 7 6 5 3 1 1 0.5 0.3 0.2 1 3 5 7 9 1 3 5 7 9 1 2 3 5 3 5 7 10 9 20 30 50 100 Breaking current Ic (A) AF09..S … AF26..S 3-pole contactors AC-3 electrical durability for Ue ≤ 440 V ..S 26 AF AF Millions of operating cycles AF 09 . .S 12 AF ..S 16 ..S AC-3 - 440 V < Ue ≤ 690 V - Ambient temperature ≤ 60 °C 10 5 3 9 7 5 3 1 2 9 7 5 3 1 1 0.5 0.2 1 3 5 7 9 1 2 3 5 10 3 5 7 1SBC101935S0201 0.3 9 20 30 50 100 Breaking current Ic (A) AF09..S … AF26..S 3-pole contactors AC-3 electrical durability for 440 V < Ue ≤ 690 V ABB | 6/59 AF09..S ... AF26..S 3-pole contactors - with spring terminals Electrical durability Electrical durability for AC-2 or AC-4 utilization category Switching cage motors: starting, reverse operation and step-by-step operation. The breaking current Ic is equal to 2.5 x Ie for AC-2 and 6 x Ie for AC-4, keeping in mind that Ie is the motor rated operational current (Ie = motor full-load current). Maximum electrical switching frequency: see "Technical data". AF 09 AF ..S 12 ..S AF 16 .. AF S 26 ..S AC-2 or AC-4 - Ue ≤ 440 V - Ambient temperature ≤ 60 °C 10 Millions of operating cycles 5 3 9 7 5 3 1 2 9 7 5 3 1 1 0.5 6 0.3 9 7 5 3 1 9 7 5 3 1 0.1 0.05 0.03 9 7 5 3 1 0.02 9 7 5 3 1 0.01 1 3 5 7 9 1 0.005 2 3 5 3 5 7 10 9 1 20 30 50 100 3 5 7 9 200 1000 Breaking current Ic (A) AF09..S … AF26..S 3-pole contactors AC-2 or AC-4 electrical durability for 440 V < Ue ≤ 690 V Millions of operating cycles AF ..S 16 AF ..S 26 ..S 12 AF AF 0 9. .S AC-2 or AC-4 - 440 V < Ue ≤ 690 V - Ambient temperature ≤ 60 °C 10 5 3 9 7 5 3 1 2 9 7 5 3 1 1 0.5 0.3 9 7 5 3 1 9 7 5 3 1 0.1 0.05 0.03 9 7 5 3 1 9 7 5 3 1 0.01 1 3 5 7 9 1 0.005 2 3 5 10 3 5 7 9 20 30 50 100 200 1000 Breaking current Ic (A) AF09..S … AF26..S 3-pole contactors AC-2 or AC-4 electrical durability for 440 V < Ue ≤ 690 V 6/60 | ABB 1SBC101936S0201 0.02 AF09..S ... AF26..S 3-pole contactors - with spring terminals Terminal marking and positioning AF09..S ... AF26..S contactors - AC / DC operated Standard devices without addition of auxiliary contacts 2T1 4T2 6T3 13 1L1 3L2 5L3 NC NO NC 14 2T1 4T2 6T3 22 2T1 A1 A2 3L2 13 21 31 43 13 2T1 2T1 4T2 6T3 1L1 NO 22 4T2 AF09 ... AF16..-30-22S 3L2 5L3 13 NO A2 2T1 4T2 6T3 NO 14 6T3 AF09 ... AF16..-30-10S 3L2 A1 1L1 3L2 5L3 21 NC A2 2T1 4T2 6T3 NC 22 AF09 ... AF16..-30-01S A1 1L1 3L2 5L3 A2 2T1 4T2 6T3 AF26..-30-00S 5L3 NC NC NO 14 22 32 44 2T1 6T3 A1 A2 A1 A2 1L1 13 21 31 43 NC 14 A1 A1 A2 5L3 21 NO NO 14 22 32 44 4T2 5L3 AF26..-30-00S A1 A2 1L1 3L2 A1 A2 AF09 ... AF16..-30-01S 1L1 3L2 5L3 NC 1L1 A1 A2 AF09 ... AF16..-30-10S NC 21 NO A1 A2 NO A1 A2 A1 A2 A1 A2 1L1 3L2 5L3 4T2 1L1 3L2 5L3 13 NO 21 NC 31 NC 43 NO A1 1L1 3L2 5L3 13 NO 21 NC A2 2T1 4T2 6T3 NO 14 NC 22 NC 32 NO 44 A2 2T1 4T2 6T3 NO 14 NC 22 6T3 A1 A2 AF26..-30-11S A1 AF26..-30-22S AF09 ... AF26..-30-22S 6 AF26..-30-11S Other possible contact combinations with auxiliary contacts added by the user A1 A2 1L1 3L2 5L3 NO 21 A1 A2 A1 A2 13 13 1L1 NO 2- = NC 22 + 2- NO 2T1 4T2 6T3 3L2 -1 13 21 NC NO NC -2 14 22 A1 A2 5L3 1- A1 A2 14 2T1 A1 A2 4T2 6T3 NC 13 1L1 3L2 5L3 NO A1 A2 13 NO A1 21 33 + 22 34 A2 NC NO 22 34 A2 NO 2T1 4T2 6T3 NO 13X 21X = NC 2T1 4T2 6T3 A1 A2 13 NO 21 NC A2 2T1 4T2 6T3 NO 14 + NC NC 22 Combination 11 -2 A1 A2 13 1L1 3L2 5L3 NC NC NO NO 14 A1 1L1 3L2 5L3 13 NO 21 NC 33 NO A2 2T1 4T2 6T3 NO 14 NC 22 NO 34 13 NO = 21 31 43 53 + NC NC NO NO 22 32 44 54 Combination 21 A1 1L1 3L2 5L3 13 NO 21 NC 31 NC 43 53 NO NO A2 2T1 4T2 6T3 NO 14 NC 22 NC 32 NO NO 44 54 NO 2T1 4T2 6T3 14 A1 A2 Combination 32 = AF09 ... AF16..-30-10S + CA4-22MS Combination 32 A1 A2 13 NO NC NO 5L3 6T3 22 32 44 54 2T1 4T2 6T3 A1 A2 22X 14X 3L2 A1 A2 NO A1 A2 1L1 3L2 5L3 4T2 NO 14 Combination 21 = AF09 ... AF16..-30-10S + CAT4-11MS NO NO -1 -4 2- 21 31 43 53 NO 2T1 4T2 6T3 14 13X 21X 1L1 Combination 11 = AF26..-30-00S + CA4-10S + CA4-01S 1L1 3L2 5L3 = NO + 2T1 A1 A2 A1 21 33 -3 2- = 1- A1 5L3 NO 2T1 4T2 6T3 14 Combination 11 = AF09 ... AF16..-30-10S + CA4-01S 1L1 3L2 5L3 3L2 1L1 NC NC NO 22X 14X 14 NO 1L1 3L2 5L3 13 NO + A1 1L1 3L2 5L3 13 13X 21X NO NO NC A2 2T1 4T2 6T3 NO NO NC 14 14X 22X NO 2T1 4T2 6T3 14 A1 A2 Combination 21 = CAL4-11S + AF09 ... AF16..-30-10S Combination 21 Note: Only AF..Z contactor with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole. ABB | 6/61 1SBC101693S0201 1L1 3L2 5L3 AF09..S ... AF16..S 3-pole contactors - with spring terminals mm, inches 77 3.03" 35 1.38" 71 2.80" 5.5 0.22" 5.5 0.22" 2x M4 8-32 UNC 70 2.76" ø 4.2 0.17" 5.5 0.22" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 80 3.15" 6 0.24" 11.5 0.45" 80 3.15" 45 1.77" 5.5 0.22" 71 2.79" 5 0.20" 77 3.03" 45 1.77" 60 2.36" Main dimensions 10 0.39" 10 0.39" 5 0.20" AF09..S, AF12..S, AF16..S 6 77 3.03" 111 4.37" 45 1.77" 71 2.79" 10 0.39" 12 0.47" 71 2.79" 45 1.77" 35 mm EN/IEC 60715 5.5 0.22" 11.5 0.45" 80 3.15" 5.5 0.22" 45 1.77" 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" 5.5 0.22" 5.5 0.22" 10 0.39" AF09..S, AF12..S, AF16..S + CA4..S 1-pole auxiliary contact block AF09..S, AF12..S, AF16..S + CAL4-11S 2-pole auxiliary contact block 111 4.37" 104 4.09" 10 0.39" 71 2.79" Note: contactor lateral distance to grounded component 2 mm 0.08" min. 6/62 | ABB 5.5 0.22" 10 0.39" AF09..S, AF12..S, AF16..S + CAT4..S 2-pole auxiliary contact and coil terminal block 1SBC101663S0201 - Rev. A AF09..S, AF12..S, AF16..S + CA4..S 4-pole auxiliary contact block 80 3.15" 5.5 0.22" 5.5 0.22" 45 1.77" 45 1.77" 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" 5.5 0.22" 45 1.77" 71 2.79" 35 mm EN/IEC 60715 45 1.77" AF26..S 3-pole contactors - with spring terminals mm, inches 77 3.03" 35 1.38" 71 2.80" ø 4.2 0.17" 5.5 0.22" 5.5 0.22" 5.5 0.22" 2x M4 8-32 UNC 70 2.76" 5.5 0.22" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 6 0.24" 80 3.15" 10 0.39" 82.5 3.24" 45 1.77" 80 3.15" 5 0.20" 86 3.38" 45 1.77" 60 2.36" Main dimensions 10 0.39" 5 0.20" 10 0.39" AF26..S 6 120 4.72" 80 3.15" 45 1.77" 86 3.38" 12 0.47" 10 0.39" 80 3.15" 45 1.77" 5.5 0.22" 5.5 0.22" 35 mm EN/IEC 60715 10 0.39" 82.5 3.24" 45 1.77" 82.5 3.24" 35 mm EN/IEC 60715 10 0.39" 5.5 0.22" 5.5 0.22" 10 0.39" AF26..S + CA4..S 1-pole auxiliary contact block AF26..S + CAL4-11S 2-pole auxiliary contact block 113 4.45" 80 3.15" 10 0.39" 35 mm EN/IEC 60715 10 0.39" 5.5 0.22" AF26..S + CAT4..S 2-pole auxiliary contact and coil terminal block 1SBC101664S0201 - Rev. A AF26..S + CA4..S 4-pole auxiliary contact block 82.5 3.24" 5.5 0.22" 5.5 0.22" 45 1.77" 45 1.77" 35 mm EN/IEC 60715 82.5 3.24" 10 0.39" 5.5 0.22" 45 1.77" 120 4.72" 80 3.15" 45 1.77" Note: contactor lateral distance to grounded component 2 mm 0.08" min. ABB | 6/63 AF09..S ... AF26..S 3-pole contactors - with spring terminals mm, inches 133.5 5.26" 77 3.03" 10 0.39" 71 2.80" 35 1.38" ø 4.2 0.17" 5.5 0.22" 2x M4 8-32 UNC 70 2.76" 5.5 0.22" 60 2.36" 5.5 0.22" 5 0.20" 1.1 0.04" 35 mm EN/IEC 60715 80 3.15" 71 2.79" 45 1.77" 5.5 0.22" 6 0.24" 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" 45 1.77" 41.3 1.63" Main dimensions 10 0.39" 5 0.20" AF09..S, AF12..S, AF16..S + TEF4S 6 142.5 5.61" 77 3.03" 10 0.39" 71 2.80" 35 1.38" ø 4.2 0.17" 5.5 0.22" 2x M4 8-32 UNC 70 2.76" 5.5 0.22" 60 2.36" 5.5 0.22" 5 0.20" 1.1 0.04" 41.3 1.63" 80 3.15" 6 0.24" 35 mm EN/IEC 60715 82.5 3.24" 10 0.39" 45 1.77" 5.5 0.22" 80 3.15" 35 mm EN/IEC 60715 45 1.77" 10 0.39" 5 0.20" Note: contactor lateral distance to grounded component 2 mm 0.08" min. 6/64 | ABB 1SBC101702S0201 AF26..S + TEF4S AF09..S ... AF26..S 2-stack 3-pole contactors - with spring terminal mm, inches 110.5 4.35" 10 0.39" 71 2.80" 10 0.39" 35 1.38" 5.5 0.22" 2x M4 8-32 UNC 70 2.76" 5.5 0.22" 60 2.36" ø 4.2 0.17" 43 1.69" 5.5 0.22" 35 mm EN/IEC 60715 6 0.24" 35 mm EN/IEC 60715 80 3.15" 11.5 0.45" 80 3.15" 45 1.77" 5.5 0.22" 71 2.79" 5 0.20" 111 4.37" 45 1.77" 45 1.77" Main dimensions 5 0.20" AF09, AF12, AF16..-30-22S 6 113 4.45" 80 3.15" 45 1.77" 10 0.39" 45 1.77" 82.5 3.24" 35 mm EN/IEC 60715 10 0.39" 5.5 0.22" 5.5 0.22" AF26..-30-11S 120 4.72" 80 3.15" 45 1.77" 10 0.39" 5.5 0.22" 45 1.77" 35 mm EN/IEC 60715 82.5 3.24" 10 0.39" 5.5 0.22" 1SBC101665S0201 AF26..-30-22S Note: contactor lateral distance to grounded component 2 mm 0.08" min. ABB | 6/65 Contactor relays - with spring terminals Main accessories NF22ES, NF31ES and NF40ES 4-pole contactor relays NF44ES, NF53ES, NF62ES, NF71ES and NF80ES 8-pole contactor relays 6 Main accessories for contactor relays NF..S contactor relay TEF4S Electronic timer Top or bottom mounted coil terminal block CA4..S 4-pole auxiliary contact block CAL4-11S 2-pole auxiliary contact block BX4-CA Protective cover CA4..S 1-pole auxiliary contact block 1SBC101678S0201 BX4 Protective cover 6/66 | ABB Contactor relays - with spring terminals Spring terminals AC / DC Control voltage NF22ES NF31ES NF40ES 2N.O. + 2N.C. 3N.O. + 1N.C. 4N.O. 6 AC / DC Control supply NF44ES NF53ES NF62ES NF71ES NF80ES 4N.O. + 4N.C. 5N.O. + 3N.C. 6N.O. + 2N.C. 7N.O. + 1N.C. 8N.O. Control circuit switching IEC AC-15 Rated operational current DC-13 Rated operational current 240 V 4A 400 V 3A 690 V 2A 6 A / 144 W 24 V 250 V UL/CSA Pilot Duty 0.27 A / 68 W A600, Q600 Main accessories Front mounting 1-pole CA4-10S or CA4-01S 4-pole CA4..S Side mounting 2-pole CAL4-11S Additional coil terminal block LDC4S Protective covers BX4 For all 1-stack contactor relays BX4-CA For 4-pole CA4..S auxiliary contact blocks 1SBC101678S0201 Auxiliary contact blocks ABB | 6/67 NF..S 4-pole contactor relays - with spring terminals AC / DC operated Description 1SBC101106F0014 NF..S contactor relays are used for switching auxiliary and control circuits. NF22ES These contactors relays are of the block type design with: –– 4 poles. Contactor relays have mechanically linked auxiliary contact elements (side-marked symbol) –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC) -- can manage large control voltage variations -- only 4 control voltage ranges covering 24...500 V 50/60 Hz and 20...500 V DC -- reduced panel energy consumption -- very distinct closing and opening. –– built-in surge suppression –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. Ordering details Number of contacts Rated control circuit voltage Uc min. ... Uc max. 6 A1 13 NO 21 NC 31 NC 43 NO A2 NO 14 NC 22 NC 32 NO 44 A1 13 NO 21 NC 33 NO 43 NO A2 NO 14 NC 22 NO 34 NO 44 A1 13 NO 23 NO 33 NO 43 NO A2 NO 14 NO 24 NO 34 NO 44 V 50/60 Hz 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 Type V DC 48...130 100...250 250...500 48...130 100...250 250...500 48...130 100...250 250...500 (1) (1) (1) NF22ES-41 NF22ES-12 NF22ES-13 NF22ES-14 NF31ES-41 NF31ES-12 NF31ES-13 NF31ES-14 NF40ES-41 NF40ES-12 NF40ES-13 NF40ES-14 Order code Weight 1SBH137004R4122 1SBH137004R1222 1SBH137004R1322 1SBH137004R1422 1SBH137004R4131 1SBH137004R1231 1SBH137004R1331 1SBH137004R1431 1SBH137004R4140 1SBH137004R1240 1SBH137004R1340 1SBH137004R1440 Pkg (1 pce) kg 0.270 0.270 0.270 0.310 0.270 0.270 0.270 0.310 0.270 0.270 0.270 0.310 (1) For 24...60 V 50/60 Hz - 20...60 V DC, use NF..ES-11 (see voltage code table). NF..ES-11 not suitable for direct control by PLC-output. Main dimensions mm, inches 77 3.03" 45 1.77" 71 2.79" 5.5 0.22" 10 0.39" NF22ES, NF31ES, NF40ES 6/68 | ABB 1SBC101691S0201 - Rev. A 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" 5.5 0.22" NFZ..S 4-pole contactor relays - with spring terminals AC / DC operated - low consumption Description Ordering details Number of contacts A1 13 NO 21 NC 31 NC 43 NO A2 NO 14 NC 22 NC 32 NO 44 A1 13 NO 21 NC 33 NO 43 NO A2 NO 14 NC 22 NO 34 NO 44 A1 13 NO 23 NO 33 NO 43 NO A2 NO 14 NO 24 NO 34 NO 44 Rated control circuit voltage Uc min. ... Uc max. V 50/60 Hz – 24...60 48...130 100...250 – 24...60 48...130 100...250 – 24...60 48...130 100...250 Type V DC 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 NFZ22ES-20 NFZ22ES-21 NFZ22ES-22 NFZ22ES-23 NFZ31ES-20 NFZ31ES-21 NFZ31ES-22 NFZ31ES-23 NFZ40ES-20 NFZ40ES-21 NFZ40ES-22 NFZ40ES-23 Order code Weight 1SBH136004R2022 1SBH136004R2122 1SBH136004R2222 1SBH136004R2322 1SBH136004R2031 1SBH136004R2131 1SBH136004R2231 1SBH136004R2331 1SBH136004R2040 1SBH136004R2140 1SBH136004R2240 1SBH136004R2340 Pkg (1 pce) kg 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 0.310 6 Note: Only NFZ..S contactor relays with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole. Main dimensions mm, inches 77 3.03" 45 1.77" 71 2.79" 1SBC101712S0201 - Rev. A 35 mm EN/IEC 60715 5.5 0.22" 11.5 0.45" NFZ22ES These contactors relays are of the block type design with: –– 4 poles. Contactor relays have mechanically linked auxiliary contact elements (side-marked symbol) –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC) -- can manage large control voltage variations -- only 4 control voltage ranges covering 24...250 V 50/60 Hz and 12...250 V DC -- allow direct control by PLC-output ≥ 24 V DC 500 mA -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. 80 3.15" 1SBC101106F0014 NFZ..S contactor relays are used for switching auxiliary and control circuits. 5.5 0.22" 10 0.39" NFZ22ES, NFZ31ES, NFZ40ES ABB | 6/69 NF..S 8-pole contactor relays - with spring terminals AC / DC operated Description 1SBC101107F0014 NF..S contactor relays are used for switching auxiliary and control circuits. NF44ES These contactors relays are of the block type design with: –– 8 poles with a permanently fixed 4-pole auxiliary contact block. Contactor relays have mechanically linked auxiliary contact elements (side-marked symbol) –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC) -- can manage large control voltage variations -- only 4 control voltage ranges covering 24...500 V 50/60 Hz and 20...500 V DC -- reduced panel energy consumption -- very distinct closing and opening. –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. Ordering details Number of contacts 1st stack Rated control circuit voltage Uc min. ... Uc max. 2nd stack 6 A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 V 50/60 Hz 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 24...60 48...130 100...250 250...500 Type V DC 48...130 100...250 250...500 48...130 100...250 250...500 48...130 100...250 250...500 48...130 100...250 250...500 48...130 100...250 250...500 (1) (1) (1) (1) (1) NF44ES-41 NF44ES-12 NF44ES-13 NF44ES-14 NF53ES-41 NF53ES-12 NF53ES-13 NF53ES-14 NF62ES-41 NF62ES-12 NF62ES-13 NF62ES-14 NF71ES-41 NF71ES-12 NF71ES-13 NF71ES-14 NF80ES-41 NF80ES-12 NF80ES-13 NF80ES-14 Order code Weight 1SBH137004R4144 1SBH137004R1244 1SBH137004R1344 1SBH137004R1444 1SBH137004R4153 1SBH137004R1253 1SBH137004R1353 1SBH137004R1453 1SBH137004R4162 1SBH137004R1262 1SBH137004R1362 1SBH137004R1462 1SBH137004R4171 1SBH137004R1271 1SBH137004R1371 1SBH137004R1471 1SBH137004R4180 1SBH137004R1280 1SBH137004R1380 1SBH137004R1480 Pkg (1 pce) kg 0.320 0.320 0.320 0.360 0.320 0.320 0.320 0.360 0.320 0.320 0.320 0.360 0.320 0.320 0.320 0.360 0.320 0.320 0.320 0.360 (1) For 24...60 V 50/60 Hz - 20...60 V DC, use NF..ES-11 (see voltage code table). NF..ES-11 not suitable for direct control by PLC-output. Main dimensions mm, inches 111 4.37" 45 1.77" 71 2.79" 10 0.39" NF44ES, NF53ES, NF62ES, NF71ES, NF80ES 6/70 | ABB 1SBC101713S0201 - Rev. A 5.5 0.22" 45 1.77" 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" 5.5 0.22" NFZ..S 8-pole contactor relays - with spring terminals AC / DC operated - low consumption Description Ordering details Number of contacts 1st stack Rated control circuit voltage Uc min. ... Uc max. 2nd stack A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 V 50/60 Hz – 24...60 48...130 100...250 – 24...60 48...130 100...250 – 24...60 48...130 100...250 – 24...60 48...130 100...250 – 24...60 48...130 100...250 Type V DC 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 12...20 20...60 48...130 100...250 NFZ44ES-20 NFZ44ES-21 NFZ44ES-22 NFZ44ES-23 NFZ53ES-20 NFZ53ES-21 NFZ53ES-22 NFZ53ES-23 NFZ62ES-20 NFZ62ES-21 NFZ62ES-22 NFZ62ES-23 NFZ71ES-20 NFZ71ES-21 NFZ71ES-22 NFZ71ES-23 NFZ80ES-20 NFZ80ES-21 NFZ80ES-22 NFZ80ES-23 Order code Weight 1SBH136004R2044 1SBH136004R2144 1SBH136004R2244 1SBH136004R2344 1SBH136004R2053 1SBH136004R2153 1SBH136004R2253 1SBH136004R2353 1SBH136004R2062 1SBH136004R2162 1SBH136004R2262 1SBH136004R2362 1SBH136004R2071 1SBH136004R2171 1SBH136004R2271 1SBH136004R2371 1SBH136004R2080 1SBH136004R2180 1SBH136004R2280 1SBH136004R2380 Pkg (1 pce) kg 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 0.360 6 Note: Only NFZ..S contactor relays with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole. Main dimensions mm, inches 111 4.37" 45 1.77" 71 2.79" 10 0.39" 1SBC101714S0201 - Rev. A 5.5 0.22" 45 1.77" 35 mm EN/IEC 60715 5.5 0.22" 11.5 0.45" NFZ44ES These contactors relays are of the block type design with: –– 8 poles with a permanently fixed 4-pole auxiliary contact block. Contactor relays have mechanically linked auxiliary contact elements (side-marked symbol) –– control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 100...250 V AC and DC) -- can manage large control voltage variations -- only 4 control voltage ranges covering 24...250 V 50/60 Hz and 12...250 V DC -- allow direct control by PLC-output ≥ 24 V DC 500 mA -- reduced panel energy consumption -- very distinct closing and opening -- can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). –– built-in surge suppression –– add-on auxiliary contact blocks for side mounting and a wide range of accessories. 80 3.15" 1SBC101107F0014 NFZ..S contactor relays are used for switching auxiliary and control circuits. NFZ44ES, NFZ53ES, NFZ62ES, NFZ71ES, NFZ80ES ABB | 6/71 NF..S contactor relays - with spring terminals Main accessories Contactor relays and main accessories (other accessories available) NF..S contactor relay TEF4S Electronic timer Top or bottom mounted coil terminal block CA4..S 4-pole auxiliary contact block CAL4-11S 2-pole auxiliary contact block BX4-CA Protective cover 6 BX4 Protective cover CA4..S 1-pole auxiliary contact block Main accessory fitting details Many configurations of accessories are possible depending on whether these are front-mounted or side-mounted. Contactor relay types Front-mounted accessories Auxiliary contact blocks Main poles Electronic timer Side-mounted accessories Auxiliary contact blocks TEF4S 2-pole CAL4-11S Left side 1-pole CA4..S 4-pole CA4..S Right side Max. add-on N.C. auxiliary contacts: 3 N.C. max. on positions 1, 2, 3, 4 and 2 N.C. max. on positions 1 ±30°, 5 NF.. 2 2 ES 3 1 ES 4 max. 2 max. or 1 – or 1 or 1 + + 1 1 + – 1 + – 1 Max. add-on N.C. auxiliary contacts: 4 N.C. max. on positions 1, 2, 3, 4 and 3 N.C. max. on positions 1 ±30°, 5 NF.. 4 5 6 7 8 4 3 2 1 0 ES ES ES ES ES 4 max. 2 max. – or 1 – or 1 or 1 – – + + 1 1 1 – 1SBC101666S0201 NF.. 4 0 ES 6/72 | ABB NF..S contactor relays - with spring terminals Main accessories Ordering details (1) 1SBC101110F0014 For contactor relays Auxiliary Type contacts Order code Pkg qty Weight (1 pce) kg Front-mounted instantaneous auxiliary contact blocks CA4-10S 1SBC101125F0014 NF..S 1 1 0 0 2 3 4 NF..S CA4-22MS 0 0 1 1 2 1 0 CA4-10S CA4-10S-T CA4-01S CA4-01S-T CA4-22NS CA4-31NS CA4-40NS 1SBN010119R1010 1SBN010119T1010 1SBN010119R1001 1SBN010119T1001 1SBN010145R1222 1SBN010145R1231 1SBN010145R1240 1 10 1 10 1 1 1 0.016 0.016 0.016 0.016 0.060 0.060 0.060 1SBN010130R1011 1 0.045 Order code Pkg qty Weight (1 pce) Side-mounted instantaneous auxiliary contact blocks 1SBC101113F0014 NF..S 1 For contactor relays Time delay Delay range type 1SBC101393F0014 selected by switch 1SBC101135F0014 Rated control circuit voltage Uc Auxiliary Type contacts 6 kg V 50/60 Hz or DC Front-mounted electronic timer NF..S TEF4S-OFF 0.1...1 s 1...10 s 10...100 s ON-delay 24...240 1 1 TEF4S-ON 1SBN020113R1000 1 0.065 OFF-delay 24...240 1 1 TEF4S-OFF 1SBN020115R1000 1 0.065 Type Pkg qty Weight (1 pce) Ordering details (1) BX4 Order code kg Additional coil terminal block NF..S LDC4S 1SBN070157T1000 10 0.010 BX4 BX4-CA 1SBN110108T1000 1SBN110109W1000 10 50 0.006 0.001 Protective covers All 1-stack contactor relays For 4-pole CA4..S auxiliary contact blocks (1) See "Main accessory fitting details" table. 1SBC101706S0201 1SBC101136F0014 For contactors LDC4S 1SBC101138F0014 CAL4-11S Ordering details (1) CAL4-11S BX4-CA 1 ABB | 6/73 NF..S contactor relays - with spring terminals Technical data Contact utilization characteristics according to IEC AC / DC operated Contactor relay types Standards Rated operational voltage Ue max. Rated frequency (without derating) Conventional free-air thermal current Ith θ ≤ 40 °C Ie / Rated operational current AC-15 NF..S IEC 60947-1 / 60947-5-1 and EN 60947-1 / 60947-5-1 690 V 50/60 Hz 16 A acc. to IEC 60947-5-1 6A 4A 3A 2A 2A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 24-127 V 50/60 Hz 220-240 V 50/60 Hz 400-440 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz Rated making capacity AC-15 Rated breaking capacity AC-15 Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC 400 V DC 500 V DC 600 V DC 6 Short-circuit protection device gG type fuse Rated short-time withstand current Icw for 1.0 s for 0.1 s Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Non-overlapping time between N.O. and N.C. contacts Power dissipation per pole at 6 A Max. electrical switching frequency AC-15 DC-13 Mechanically linked contacts (acc. to annex L of IEC 60947-5-1) 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.27 A / 60 W 0.27 A / 68 W 0.15 A / 60 W 0.13 A / 65 W 0.1 A / 60 W 10 A 100 A 140 A 12 V / 3 mA 10-7 ≥ 2 ms 0.1 W 1200 cycles/h 900 cycles/h Built-in N.O. or N.C. auxiliary contacts and additional N.O. or N.C. auxiliary contacts (CA4..S, CAL4..S aux. contact blocks) are mechanically linked contacts Contact utilization characteristics according to UL / CSA AC / DC operated NF..S UL 508, CSA C22.2 N°14 600 V AC, 600 V DC A600, Q600 10 A 7200 VA 720 VA 2.5 A 69 VA 1SBC101695S0201 - Rev. A Contactor relay types Standards Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking 6/74 | ABB NF..S contactor relays - with spring terminals Technical data General technical data Contactor relay types Rated insulation voltage Ui acc. to IEC 60947-5-1 acc. to UL/CSA Rated impulse withstand voltage Uimp. Electromagnetic compatibility Ambient air temperature close to contactor relay Operation in free air Storage Climatic withstand AC / DC operated NF..S 690 V 600 V 6 kV Devices complying with IEC 60947-1 / EN 60947-1 - Environment A -40...+70 °C -60...+80 °C Category B according to IEC 60947-1 Annex Q Maximum operating altitude (without derating) Mechanical durability Number of operating cycles Max. switching frequency Shock withstand 3000 m 20 millions operating cycles 6000 cycles/h acc. to IEC 60068-2-27 and EN 60068-2-27 Mounting position 1 C1 A A B1 B2 C2 Shock direction A B1 B2 C1 C2 Vibration withstand acc. to IEC 60068-2-6 1/2 sinusoidal shock for 11 ms: no change in contact position, closed or open position 30 g 25 g closed position / 5 g open position 15 g 25 g 25 g 5...300 Hz 4 g closed position / 2 g open position 6 Magnet system characteristics Contactor relay types Coil operating limits AC / DC operated AC supply acc. to IEC 60947-5-1 DC supply NF..S at θ ≤ 60 °C 0.85 x Uc min...1.1 x Uc max. at θ ≤ 70 °C 0.85 x Uc min...Uc max. at θ ≤ 60 °C 0.85 x Uc min...1.1 x Uc max. at θ ≤ 70 °C (NF) 0.85 x Uc min...Uc max - (NFZ) 0.85 x Uc min...1.1 x Uc max. AC control voltage Rated control circuit voltage Uc 24...500 V AC Average pull-in value (NF) 50 VA - (NFZ) 16 VA 50/60 Hz Coil consumption Average holding value (NF) 2.2 VA / 2 W - (NFZ) 1.7 VA / 1.5 W DC control voltage Rated control circuit voltage Uc 12...500 V DC Average pull-in value (NF) 50 W - (NFZ) 12...16 W Coil consumption Average holding value (NF) 2 W - (NFZ) 1.7 W PLC-output control (NFZ) ≥ 500 mA 24 V DC Drop-out voltage ≤ 60 % of Uc min. Voltage sag immunity acc. to SEMI F47-0706 (NFZ) conditions of use on request Dips withstand (NFZ) 22 ms average for Uc ≥ 24 V 50/60 Hz or Uc ≥ 20 V DC -20 °C ≤ θ ≤ +60 °C Operating time N.O. contact closing 40...95 ms Between coil energization and: N.C. contact opening 38...90 ms N.O. contact opening 11...95 ms Between coil de-energization and: N.C. contact closing 13...98 ms Mounting characteristics Contactor relay types Mounting positions AC / DC operated NF..S Pos. 2 +30° -30° Pos. 4 Pos. 3 Pos. 1 ± 30° Pos. 5 1SBC101695S0201 - Rev. A Pos. 1 Max. add-on N.C. auxiliary contacts: see accessory fitting details for a NF..S contactor relay Mounting distances Fixing On rail according to IEC 60715, EN 60715 By screws (not supplied) The contactor relays can be assembled side by side. 35 x 7.5 mm or 35 x 15 mm 2 x M4 screws placed diagonally ABB | 6/75 NF..S contactor relays - with spring terminals Technical data Connecting characteristics Contactor relay types Main terminals AC / DC operated NF..S Spring terminals Connection capacity (min. ... max.) Pole and coil terminals Rigid Flexible with non insulated ferrule Flexible with insulated ferrule Connection capacity acc. to UL/CSA Stripping length Degree of protection 1x 2x 1x 2x 1x 2x 1 or 2 x 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 0.75...1.5 mm² AWG 18...12 10 mm acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 All terminals Screwdriver type IP20 Flat Ø 3.5 1SBC101695S0201 - Rev. A 6 6/76 | ABB NF..S contactor relays - with spring terminals Terminal marking and positioning Standard devices without addition of auxiliary contacts 13 A1 A2 21 31 13 43 A1 A2 21 33 43 13 NO NC NO NO NO NC NC NO A1 A2 23 33 43 13 NO NO NO NO A1 A2 23 33 NO NO NO NO 51 61 71 81 NO NC NC NO NO NC NO NO NO NO NO NO 52 62 72 82 NO NO NO NO 14 14 14 14 32 A1 A2 44 NF..22ES 13 A1 A2 23 33 22 34 A1 A2 44 NF..31ES 43 13 NO NO NO NO 53 61 71 81 A1 A2 23 33 34 A2 44 NF..40ES 43 13 NO NO NO NO 53 61 71 83 NO NC NC NC 24 A1 A1 A2 23 33 34 A2 43 13 A1 A2 23 33 54 62 74 84 NO NO NO NO 54 64 74 84 NO NO NO NO 14 14 14 14 34 A2 44 NF..53ES 24 34 A1 A2 44 24 34 A1 A2 44 NF..71ES NF..62ES 24 34 A1 A2 A2 NO 14 NC 22 NC 32 NO 44 A1 13 NO 21 NC 33 NO 43 NO A2 NO 14 NC 22 NO 34 NO 44 NF..31ES A1 13 NO 23 NO 33 NO 43 NO A2 NO 14 NO 24 NO 34 NO 44 A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 NC 72 NC 82 NF..44ES A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 81 NC A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NC 82 NF..53ES NO NO NO NO 54 62 72 84 NO NO NO NO 24 43 NO A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NC 72 NO 84 43 54 62 72 82 NO NO NO NO A1 31 NC NF..40ES NO NO NO NO 53 63 73 83 NO NC NO NO 21 NC 44 NF..44ES NO NO NO NO 53 61 73 83 NO NC NC NO 24 A1 13 NO NF..22ES NC NC NC NC 22 A1 43 NF..62ES 6 A1 13 NO 23 NO 33 NO 43 NO 53 NO 61 NC 73 NO 83 NO A1 13 NO 23 NO 33 NO 43 NO 53 NO 63 NO 73 NO 83 NO NO 14 NO 24 NO 34 NO 44 NO 54 NC 62 NO 74 NO 84 A2 NO 14 NO 24 NO 34 NO 44 NO 54 NO 64 NO 74 NO 84 44 A2 NF..71ES NF..80ES NF..80ES Other possible contact combinations with auxiliary contacts added by the user A1 A2 21 33 43 13 A2 21 33 13 43 NO NC NO NO 5- NO NC NO NO 53 NO A1 = + 54 NO NC NO NO 5NO NC NO NO 14 14 22 34 A1 A2 44 22 34 A1 A2 A1 A2 23 33 + 33 14 14 CA4-10S A1 A2 23 33 43 NC 24 34 A2 44 13 A1 A2 23 33 13 43 24 34 A1 A2 A1 A2 23 33 = + 14X 14X 14 14 14 44 Combination 51 = CAL4-11S + 24 34 A1 A2 NF..40ES 44 24 34 A1 A2 44 -2 24 34 A1 A2 Combination 62 = NF..40ES 61 71 83 NO NC NC NO 54 NO NO NO NO 34 NC + -2 53 54 62 72 84 NO NO NO NO A2 21 NC 33 NO 43 NO 53 NO A2 NO 14 NC 22 NO 34 NO 44 NO 54 Combination 41E A1 13 NO 23 NO 33 NO 43 NO 51 NC 61 NC A2 NO 14 NO 24 NO 34 NO 44 NC 52 NC 62 Combination 42E A1 13 NO 23 NO 33 NO 43 NO 13X NO 21X NC A2 NO 14 NO 24 NO 34 NO 44 NO 14X NC 22X 43 NO NO NO NO 24 NC + CA4-01S+CA4-01S 22X NO A1 -1 NO NO NO NO NO NO NO NO 53 61 71 83 13 NO 44 22X NO NO NO NO NO 14 -1 + Combination 42 = NF..40ES NO NC NC NO + NO NO NO NO 5- 6= A1 A1 43 5- 6NO NO NO NO NO NO NO NO NC A2 23 52 62 NO NO NO NO NO 21X = A1 -4 NO NO NO NO NO 21X NC 13 NC NC 13 NC 43 NO 13X 13 33 NO NO NO NO 51 61 43 13X A2 23 -3 44 Combination 41 = NF..31ES A1 62 72 84 Combination 51E A1 13 NO 23 NO 33 NO 43 NO 53 61 NO NC 71 NC 83 NO A2 NO 14 NO 24 NO 34 NO 44 NO NC 54 62 NC 72 NO 84 44 + CA4-22NS Combination 62E Note: Only NFZ contactor relays with DC control voltage 12...20 V DC need to respect the connection polarities indicated close to the coil terminals: A1+ for the positive pole and A2- for the negative pole. ABB | 6/77 1SBC101694S0201 13 NF..S contactor relays - with spring terminals mm, inches ø 4.2 0.17" 5.5 0.22" 35 mm EN/IEC 60715 35 mm EN/IEC 60715 6 0.24" 80 3.15" 11.5 0.45" 35 1.38" 71 2.80" 5.5 0.22" 5.5 0.22" 2x M4 8-32 UNC 70 2.76" 45 1.77" 5.5 0.22" 80 3.15" 77 3.03" 71 2.79" 5 0.20" 77 3.03" 45 1.77" 60 2.36" Main dimensions 10 0.39" 10 0.39" 5 0.20" NF..22ES, NF..31ES, NF..40ES 6 111 4.37" 45 1.77" 71 2.79" 77 3.03" 10 0.39" 12 0.47" 71 2.79" 45 1.77" 35 mm EN/IEC 60715 80 3.15" 5.5 0.22" 11.5 0.45" 5.5 0.22" 45 1.77" 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" 5.5 0.22" 5.5 0.22" 10 0.39" NF..22ES, NF..31ES, NF..40ES + CA4..S 1-pole auxiliary contact block NF..22ES, NF..31ES, NF..40ES + CAL4-11S 2-pole auxiliary contact block 111 4.37" 111 4.37" 45 1.77" 10 0.39" 71 2.79" NF..22ES, NF..31ES, NF..40ES + CA4..S 4-pole auxiliary contact block Note: Contactor relay lateral distance to grounded component 2 mm 0.08" min. 6/78 | ABB 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" 5.5 0.22" 10 0.39" 5.5 0.22" 45 1.77" 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" 5.5 0.22" 5.5 0.22" NF..44ES, NF..53ES, NF..62ES, NF..71ES, NF..80ES 1SBC101668S0201 71 2.79" 45 1.77" 45 1.77" NF..S contactor relays - with spring terminals mm, inches 133.5 5.26" 77 3.03" 10 0.39" 71 2.80" 35 1.38" ø 4.2 0.17" 5.5 0.22" 2x M4 8-32 UNC 70 2.76" 5.5 0.22" 60 2.36" 5.5 0.22" 5 0.20" 1.1 0.04" 35 mm EN/IEC 60715 80 3.15" 71 2.79" 45 1.77" 5.5 0.22" 6 0.24" 35 mm EN/IEC 60715 11.5 0.45" 80 3.15" 45 1.77" 41.3 1.63" Main dimensions 10 0.39" 5 0.20" NF..22ES, NF..31ES, NF..40ES + TEF4S 1SBC101704S0201 6 Note: Contactor relay lateral distance to grounded component 2 mm 0.08" min. ABB | 6/79 Auxiliary contact blocks - with spring terminals 1SBC101110F0014 Description The auxiliary contact blocks are used for the operation of auxiliary and control circuits for standard industrial environments. Types of auxiliary contact blocks for front mounting: –– CA4..S 1 or 4-pole block, with instantaneous N.O., N.C. contacts –– CAT4..S 2-pole block, front-mounted, instantaneous N.O. + N.C. contacts with A1 / A2 coil terminal connection on front face –– CAL4..S 2-pole block, with instantaneous N.O. + N.C. contacts clipped onto the right and/or left side of the contactors. 1SBC101113F0014 CA4-10S CAL4-11S Select the type of 2 or 4-pole auxiliary contact blocks CAT4 or CA4 (-..ES, -..MS, -..US or -..NS) according to the device type for compliance with the standard requirements (see terminal and marking positioning). The auxiliary contact blocks are equipped with spring terminals protected against accidental direct contact and bear the corresponding function marking. Ordering details (1) For contactors Auxiliary contacts Type Order code Pkg qty 6 Weight (1 pce) 1SBC101125F0014 kg Front-mounted instantaneous auxiliary contact blocks AF09..S ... AF38..S 4-pole NF..S CA4-22MS AF09 ... AF16..-30-10S 1SBC101117F0014 AF26..S 4-pole NF..S 1 1 0 0 2 3 2 3 4 2 3 4 0 0 1 1 2 1 2 1 0 2 1 0 – – – – – – – – – – – – – – – – – – – – – – – – CA4-10S CA4-10S-T CA4-01S CA4-01S-T CA4-22MS CA4-31MS CA4-22ES CA4-31ES CA4-40ES CA4-22NS CA4-31NS CA4-40NS 1SBN010119R1010 1SBN010119T1010 1SBN010119R1001 1SBN010119T1001 1SBN010145R1122 1SBN010145R1131 1SBN010145R1022 1SBN010145R1031 1SBN010145R1040 1SBN010145R1222 1SBN010145R1231 1SBN010145R1240 1 10 1 10 1 1 1 1 1 1 1 1 0.016 0.016 0.016 0.016 0.060 0.060 0.060 0.060 0.060 0.060 0.060 0.060 1SBN010130R1011 1 0.045 1 1 1 0.045 0.045 0.045 CAT4-11ES Side-mounted instantaneous auxiliary contact blocks AF09..S ... AF26..S NF..S 1 1 – – CAL4-11S Front-mounted instantaneous auxiliary contact and A1/A2 coil terminal blocks AF09 ... AF16..-30-10S AF26..S AF09 ... AF16..-30-01S 1 1 1 1 1 1 – – – – – – CAT4-11MS CAT4-11ES CAT4-11US 1SBN010153R1111 1SBN010153R1011 1SBN010153R1311 1SBC101705S0201 (1) For each contactor or contactor relay type, refer to "Accessory fitting details" table. Note: CAT4..S not fittable on AF..Z contactors with DC control voltage 12…20 V DC. 6/80 | ABB Auxiliary contact blocks - with spring terminals Technical data 1-pole CA4..S, 4-pole CA4..S, 2-pole CAT4..S, 2-pole CAL4..S Types Contact utilization characteristics according to IEC IEC 60947-5-1 and EN 60947-5-1 690 V 6 kV 24...690 V 16 A 50/60 Hz Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated impulse withstand voltage Uimp. Rated operational voltage Ue max. Conventional thermal current Ith - θ ≤ 40 °C Rated frequency (without derating) Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 24-127 V 50/60 Hz 220-240 V 50/60 Hz 400-440 V 50/60 Hz 500 V 50/60 Hz 690 V 50/60 Hz Making capacity Breaking capacity Ie / Rated operational current DC-13 acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw θ = 40 °C Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Power dissipation per pole at 6 A Mechanical durability Number of operating cycles Max. switching frequency Max. electrical switching frequency 24 V DC 48 V DC 72 V DC 110 V DC 125 V DC 220 V DC 250 V DC 400 V DC 500 V DC 600 V DC for 1.0 s for 0.1 s AC-15 DC-13 Mechanically linked contacts acc. to annex L of IEC 60947-5-1 Mirror contacts acc. to annex F of IEC 60947-4-1 6A 4A 3A 2A 2A 10 x Ie AC-15 acc. to IEC 60947-5-1 10 x Ie AC-15 acc. to IEC 60947-5-1 6 A / 144 W 2.8 A / 134 W 1 A / 72 W 0.55 A / 60 W 0.55 A / 69 W 0.27 A / 60 W 0.27 A / 68 W 0.15 A / 60 W 0.13 A / 65 W 0.1 A / 60 W 10 A 100 A 140 A 12 V / 3 mA 10-7 0.1 W 10 millions operating cycles 3600 cycles/h 1200 cycles/h 900 cycles/h Additional N.O. or N.C. auxiliary contacts (CA4..S, CAL4..S, CAT4..S) are mechanically linked contacts Additional N.C. auxiliary contacts (CA4..S, CAL4..S, CAT4..S) are mirror contacts 6 Contact utilization characteristics according to UL / CSA UL 508, CSA C22.2 N°14 600 V AC, 600 V DC A600, Q600 10 A 7200 VA 720 VA 2.5 A 69 VA Standards Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking Connecting characteristics Flexible with ferrule Flexible with insulated ferrule Connection capacity acc. to UL/CSA Stripping length Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screwdriver type 1x 2x 1x 2x 1x 2x 1 or 2 x 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² AWG 18...14 10 mm IP20 Flat Ø 3.5 1SBC101717S0201 Connection capacity (min. ... max.) Rigid solid ABB | 6/81 Auxiliary contact blocks for AF09..S ... AF26..S contactors and NF..S contactor relays - with spring terminals Electrical durability Electrical durability for AC-15 utilization category AC-15 utilization category according to IEC 60947-5-1 / EN 60947-5-1: –– making current: 10 x Ie with cos ϕ = 0.7 and Ue – – breaking current: Ie with cos ϕ = 0.4 and Ue. These curves represent the electrical durability of the built-in or add-on auxiliary contacts in relation to the breaking current. The curves have been drawn for resistive and inductive loads up to 690 V, 40...60 Hz. 30 20 – – AF09..S ... AF26..S contactor built-in auxiliary contacts – – 1-pole and 4-pole CA4..S, 2-pole CAT4..S, 2-pole CAL4..S add-on auxiliary contacts. 10 3 Example: Breaking current = 1 A On the opposite curve at intersection "O" 1 A the corresponding value for the electrical durability is approximately 2 millions operating cycles. 2 1 0.5 0.3 0.2 0.1 0.02 0.05 0.1 0.2 0.3 0.5 1 2 3 4 5 6 10 Breaking current (A) 30 20 NF..S contactor relays. (For add on auxiliary contacts see curve above). 10 Million operating cycles 5 3 2 1 0.5 0.3 0.2 0.1 0.02 0.05 0.1 0.2 0.3 0.5 1 2 3 4 5 6 10 Breaking current (A) Electrical durability for DC-13 utilization category DC-13 utilization category according to IEC 60947-5-1 / EN 60947-5-1: making and breaking current Ie and Ue. 100 70 50 6 1.10 cycles 6 3.10 cycles – – AF09..S ... AF26..S contactor built-in auxiliary contacts 1-pole and 4-pole CA4..S, 2-pole CAT4..S, 2-pole CAL4..S add-on auxiliary contacts, –– NF..S contactor relays. 20 6 10.10 cycles 10 5 2 1 10 20 24 50 72 100 200 250 Voltage (V) 6/82 | ABB 500 Example: Control of DC electro-magnet: Ue voltage = 72 V DC and breaking power = 70 W. On the opposite curve at intersection "O" 72 V / 70 W the corresponding value for the electrical durability is approximately 2 millions operating cycles. 1SBC101937S0201 Breaking power (W) 6 Million operating cycles 5 Add-on auxiliary contacts - with spring terminals Terminal marking and positioning 1-pole auxiliary contacts -1 -3 NO NC -4 -2 CA4-01S CA4-10S 2-pole auxiliary contacts 31X 43X 21 32X / 13 -3 -1 NC NO 22 14 CAT4-11MS 6 21 NC NO 34 22 44X / CAL4-11S (Right side-mounted) 33 NO NC NO 21X 44X 22X / CAL4-11S (Left side-mounted) 43X / NC 13X 32X 14X / 31X / NC 22X 21X / NO 14X 13X / -2 -4 CAT4-11ES CAT4-11US 4-pole auxiliary contacts 54 63 NO 73 NO 64 74 83 NO 84 53 54 61 73 NC NO 62 74 83 NO 84 53 54 61 71 NC NC 62 72 CA4-22NS 33 NO 24 34 43 53 NO NO 44 54 13 NO 14 21 NC 22 33 NO 34 83 NO 84 13 NO 14 21 31 NC NC 22 32 CA4-22ES 63 NO 73 NO 64 74 83 NO 84 CA4-40NS 43 NO 44 CA4-31ES CA4-31NS NO 14 23 NO CA4-40ES CA4-40NS NO 13 NO 21 NC 22 33 NO 34 43 NO 44 53 NO 54 CA4-31MS 43 NO 44 21 31 NC NC 22 32 43 NO 44 CA4-22MS 53 NO 54 61 73 NC NO 62 74 83 NO 84 CA4-31NS 53 NO 54 53 NO 54 61 71 NC NC 62 72 83 NO 84 CA4-22NS 1SBC101681S0201 53 NO ABB | 6/83 Electronic timers - with spring terminals 1SBC101394F0014 Description TEF4S-ON TEF4S frontal electronic timers are used for realizing timing function and are available in ON-delay and OFF-delay versions. Compact solution in cabinet compared to separate timers TEF4S electronic timers are front-mounted and locked on AF..S contactors or NF..S contactor relays. A mechanical indicator allows to show the state of the contactor. Safe and cost-reduced wiring TEF4S electronic timers are supplied by a direct plug-in parallel connection to the coil terminals A1 - A2 of the contactor or contactor relay. A varistor is integrated on the timer to offer a built-in protection against surges in the contactor coil. Available for a wide control voltage range 24...240 V AC/DC TEF4S-ON or TEF4S-OFF allow time-delayed functions up to 100 s in 3 distinct time ranges, independently of the control system. The time delay ranges are selected by a switch and the time delay can be adjusted by means of a rotary switch. The timing function is activated by closing or opening the device on which the timer is mounted. The OFF-delay version operates without additional control supply. Ordering details 1SBC101393F0014 6 For contactors, contactor relays Time delay range Delay type selected by switch Rated control circuit voltage Uc Auxiliary Type contacts Order code Pkg (1 pce) 24...240 1 1 TEF4S-ON 1SBN020113R1000 kg 0.065 OFF-delay 24...240 1 1 TEF4S-OFF 1SBN020115R1000 0.065 V 50/60 Hz or DC AF09..S ... AF26..S NF..S 0.1...1 s 1...10 s 10...100 s ON-delay 1SBC101671S0201 TEF4S-OFF Weight 6/84 | ABB Electronic timers - with spring terminals Technical data Contact utilization characteristics according to IEC Types Standards Rated insulation voltage Ui acc. to IEC 60947-5-1 Rated impulse withstand voltage Uimp Rated operational voltage Ue max. Rated frequency (without derating) Conventional thermal current Ith - θ ≤ 40 °C Ie / Rated operational current AC-15 acc. to IEC 60947-5-1 TEF4S-ON IEC 60947-5-1 and EN 60947-5-1 400 V 4 kV 240 V 50 / 60 Hz 5 A 24-127 V 50/60 Hz 220-240 V 50/60 Hz Making capacity acc. to IEC 60947-5-1 Breaking capacity acc. to IEC 60947-5-1 Ie / Rated operational current DC-13 TEF4S-OFF 3 A 1.5 A 10 x Ie AC-15 10 x Ie AC-15 1 A / 24 W 6 A for 1.0 s 8 A for 0.1 s 8 A 12 V / 3 mA 24 V DC 10-7 0.1 W ON-delay 24 V DC acc. to IEC 60947-5-1 Short-circuit protection device gG type fuse Rated short-time withstand current Icw θ = 40 °C Minimum switching capacity with failure rate acc. to IEC 60947-5-4 Power dissipation per pole at 3 A Function diagram 6 OFF-delay 150 ms min. Uc (A1 - A2) 1s min. Uc (A1 - A2) 100 ms min. 100 ms min. N.O. (67 - 68) N.O. (67 - 68) N.C. (55 - 56) N.C. (55 - 56) t t Bistable relay inside. Before use, once apply Uc then switch it off in order to initialize position of the contacts. Control circuit voltage AC control voltage 50/60 Hz DC control voltage Rated control circuit voltage Uc Average consumption Rated control circuit voltage Uc Average consumption Rated frequency limits Supply voltage range Overvoltage protection Time delay range (t) selected by switch 24...240 V AC 1.5 mA RMS 24...240 V DC 1.5 mA 50 / 60 Hz 0.85...1.1 x Uc (at θ ≤ 70 °C) Varistor included 1 mA RMS 1 mA 0.1...1 s 1...10 s 10...100 s On-load reiteration accuracy under constant conditions Minimum ON period Recovery time Ambient air temperature Operation Storage Climatic withstand Maximum operating altitude Mounting positions Shock withstand ≤1% 0.1 s 1 s 0.15 s 0.1 s -25 °C ... +70 °C -40 °C ... +80 °C Category B according to IEC 60947-1 Annex Q 2000 m Mounting positions 1, 1 +/- 30°, 2, 3, 4, 5 1/2 sinusoidal shock for 11 ms: no change in contact position Same as contactor or contactor relay acc. to IEC 60068-2-27 and EN 60068-2-27 (Mounting position 1) Vibration withstand 5...300 Hz 3 g closed position / 2 g open position acc. to IEC 60068-2-6 Mechanical durability 5 millions operating cycles 3600 cycles/h AC-15 DC-13 1800 cycles/h 1200 cycles/h 900 cycles/h 1SBC101672S0201 Number of operating cycles Max. switching frequency Max. electrical switching frequency ABB | 6/85 Electronic timers - with spring terminals Technical data Contact utilization characteristics according to UL / CSA Types Standards Rated insulation voltage Ui acc. to UL / CSA Max. operational voltage Pilot duty AC thermal rated current AC maximum volt-ampere making AC maximum volt-ampere breaking DC thermal rated current DC maximum volt-ampere making-breaking TEF4S-ON UL 508, CSA C22.2 N°14 300 V 240 V B300, R300 5A 3600 VA 360 VA 1A 28 VA TEF4S-OFF Connecting characteristics Connection capacity (min. ... max.) Rigid solid Flexible with non insulated ferrule Flexible with insulated ferrule Connection capacity acc. to UL / CSA Stripping length Degree of protection acc. to IEC 60947-1 / EN 60947-1 and IEC 60529 / EN 60529 Screwdriver type Terminal Marking 1...2.5 mm² 1...2.5 mm² 0.75...2.5 mm² 0.75...2.5 mm² 0.75...1.5 mm² 0.75...1.5 mm² AWG 18...14 10 mm IP20 Flat Ø 3.5 A1 55 NC 67 NO KM1 A2 A1 55 NC 67 NO 56 NC 68 NO KM1 56 NC 68 NO A2 1SBC101672S0201 6 1x 2x 1x 2x 1x 2x 1 or 2 x 6/86 | ABB 1SBC101128F0014 Other accessories Ordering details For contactors Type Order code Pkg qty Weight (1 pce) kg VM4 1SBC101127F0014 Mechanical interlock unit VM4 mechanical interlock unit for the interlocking of two AF contactors. When mounted between two contactors without additional width, the VM4 mechanical interlock unit prevents one of the contactors from closing as long as the other contactor is closed. The mechanical interlock unit includes 2 fixing clips (BB4). BB4 1SBC101135F0014 AF09..S ... AF26..S VM4 1SBN030105T1000 10 0.005 BB4 1SBN110120W1000 50 0.002 Fixing clips AF09..S ... AF26..S LDC4S Additional coil terminal block - with spring terminals 1SBC101136F0014 Additional coil terminal block for a bottom access to the coil terminals of contactors or contactor relays. AF09..S ... AF26..S and NF..S LDC4S 1SBN070157T1000 10 6 0.010 Protective covers Sealable and transparent protective covers BX4 and non-removable BX4-CA to protect the devices against accidental contact. BX4 1SBC101138F0014 All 1-stack contactors and contactor relays For 4-pole CA4 and 2-pole CAT4 auxiliary contact blocks BX4 BX4-CA 1SBN110108T1000 1SBN110109W1000 10 50 0.006 0.001 Mounting piece Mounting piece for replacement of A / AL26 ... A / AL40 contactors fixed by screws by AF contactors in 45 mm width. 1SBC101383F0014 BX4-CA AF09..S ... AF26..S BP38-4 1SBN112303T1000 10 0.003 Function markers Box of 16 blank cards (16 markers by card) printable on HTP500 thermal transfer printer and AMS 500 marking table to identify your contactors, overload relays or manual motor starters. Marker dimensions: 7 x 20 mm (.276" x .787"). BP38-4 1SNC160101F0014 Box of 16 blank cards AMS 500 support plate for 8 BA4 HTP500 support plate BA4 SPRC 1 HTP500-BA4 1SNA235156R2700 1SNA360010R1500 1SNA235712R2400 16 1 1 0.011 0.220 0.290 1SBN110122T1000 10 0.007 Test block BDT4 test block is suitable for switching on contactor off-load. Marking on the block indicates the contactor type to fit with. BA4 BDT4 1SBC100041V0014 AF..S, NF..S Main dimensions mm, inches 45 1.77" 44.8 1.76" 1SBC101708S0201 - Rev. A ø 4.2 0.17" M4 8-32 UNC 5 0.20" 70 2.76" 80 3.15" 90 3.54" 6 0.24" 28 1.10" BDT4 5 0.20" 54 2.13" BX4 BP38-4 ABB | 6/87 Voltage code table The below tables indicate the available coil voltages and corresponding digits for order codes. 3-pole contactors - with spring terminals Auxiliary contacts N.O. N.C. Type Order code 1SBL137004R 12 10 AF09 - 30 - 10 S - 12 AC coil code 50/60 Hz 11 24...60 V 12 48...130 V 13 100...250 V 14 250...500 V N.O. N.C. Main contacts Contactor with spring terminal Contactor type AC / DC operated AF.. DC coil code 20...60 V 48...130 V 100...250 V 250...500 V 6 3-pole contactors - low consumption - with spring terminals Low coil consumption Auxiliary contacts N.O. N.C. Type Order code AF09 Z - 30 - 10 S - 21 1SBL136004R 21 10 N.O. N.C. Main contacts Contactor with spring terminal AF.. Contactor type AC / DC operated AC coil code 50/60 Hz 20 – 21 24...60 V 22 48...130 V 23 100...250 V DC coil code AC coil code 50/60 Hz 11 24...60 V 12 48...130 V 13 100...250 V 14 250...500 V DC coil code 12...20 V 20...60 V 48...130 V 100...250 V Contactor relays - with spring terminals Contactor with spring terminal Type NF 22 E S - 12 Order code 1SBH137004R 12 22 N.O. N.C. Number contacts NF Contactor type AC / DC operated 20...60 V 48...130 V 100...250 V 250...500 V Contactor relays - low consumption - with spring terminals Low coil consumption NF Z 22 E N.O. N.C. Number contacts NF Contactor type AC / DC operated 6/88 | ABB S - 21 Order code 1SBH136004R 21 22 AC coil code 50/60 Hz 20 – 21 24...60 V 22 48...130 V 23 100...250 V DC coil code 12...20 V 20...60 V 48...130 V 100...250 V 1SBC101729S0201 Contactor with spring terminal Type Notes N13 6 ABB | 6/89 Summary_7 7 7/0 | ABB Overload relays Overview Thermal and electronic overload relays 7/2 Thermal overload relays T16 (0.10 … 16 A) Ordering details Technical data 7/4 7/5 TF42 (0.10 … 38 A) Ordering details Technical data 7/8 7/9 TF65 (22 ... 67 A) Ordering details Technical data 7/12 7/13 TF96 (40 ... 96 A) Ordering details Technical data 7/16 7/17 TF140DU (66 … 142 A) Ordering details Technical data 7/20 7/21 TA200DU (66 … 200 A) Ordering details 7/24 Technical data 7/25 7 Electronic overload relays E16DU, E45DU, E80DU, E140DU (0.10 ... 140 A) Ordering details Technical data Accessories 7/28 7/29 7/32 EF19, EF45 (0.10 ... 45 A) Ordering details Technical data 7/33 7/34 EF65, EF96, EF146 (20 ... 150 A) Ordering details Technical data 7/37 7/38 EF205, EF370 (63 ... 380 A) Ordering details Technical data 7/41 7/42 EF460, EF750 (150 ... 800 A) Ordering details Technical data 7/45 7/46 E1250DU (375 ... 1250 A) Ordering details 7/48 Technical data 7/49 General accessories WRB, WRH 7/51 Summary_7 Ordering details ABB | 7/1 Thermal and electronic overload relays Thermal overload relays 7 IEC: rated operational power AC-3 400 V 0.03 … 4.0 kW 0.03 … 4.0 kW 4.0 … 18.5 kW 18.5 … 30 kW UL/CSA: 3-phase hp-ratings 480 V 1/2 … 5 hp 1/2 … 10 hp 5 … 20 hp 30 … 60 hp Fitting to contactors B6, B7 AS09 … AS16 AF09 ... AF38 AF40, AF52, AF65 Type T16 T16 TF42 TF65 Current range 0.10 … 16 A 0.10 … 16 A 0.10 … 38 A 22 … 67 A Trip class 10 10 10 10 Single mounting kit DB16 DB16 DB42 - 0.03 … 4.0 kW 4 … 7.5 kW 4.0 … 18.5 kW 18.5 … 30 kW Electronic overload relays with integrated CT IEC: rated operational power AC-3 400 V UL/CSA: 3-phase hp-ratings 480 V 1 … 5 hp 5 … 10 hp 5 … 20 hp 30 … 60 hp Fitting to contactors B6, B7 AF09 … AF16 AF26 ... AF38 AF40, AF52, AF65 Type E16DU EF19 EF45 EF65 Current range 0.10 … 18.9 A 0.10 … 18.9 A 9 … 45 A 20 … 70 A DB16E DB19EF Trip class 10E, 20E, 30E selectable Single mounting kit - Electronic overload relays with external separate CT IEC: rated operational power AC-3 400 V UL/CSA: 3-phase hp-ratings 480 V 200 … 250 kW 315 … 400 kW 350 … 400 hp 500 … 600 hp Fitting to contactors AF400, AF460 AF580, AF750, AF1250 Type EF460 EF750 Current range 150 … 500 A 250 … 800 A Trip class 7/2 | ABB 10E, 20E, 30E selectable - 37 … 45 kW 55 … 75 kW 90 … 110 kW 60 hp 75 … 100 hp 125 … 150 hp AF80, AF96 AF116, AF140 AF190, AF205 TF96 TF140DU TA200DU 40 … 96 A 66 … 142 A 66 … 200 A 10 10A 10A - - DB200 7 37 … 45 kW 55 … 75 kW 90 … 110 kW 132 … 200 kW 60 hp 75 … 100 hp 125 … 150 hp 200 … 350 hp AF80, AF96 AF116, AF140, AF146 AF190, AF205 AF265, AF305, AF370 EF96 EF146 EF205 EF370 36 … 100 A 54 … 150 A 63 … 210 A 115 … 380 A - - 10E, 20E, 30E selectable - - 475 … 560 kW 800 … 900 hp AF1350, AF1650 2CDC106062C0201 E1250DU 375 … 1250 A 10E, 20E, 30E selectable ABB | 7/3 T16 thermal overload relays 0.10 to 16.0 A 2CDC231009F0013 Description T16 The T16 thermal overload relays are economic electromechanical protection devices for the main circuit. They offer reliable protection for motors in the event of overload or phase failure. The devices have trip class 10. The thermal overload relays are three pole relays with bimetal tripping elements. The motor current flows through the bimetal tripping elements and heats them directly and indirectly. In case of an overload (over current), the bimetal elements bent as a result of the heating. This leads to a release of the relay and a change of the contacts switching position (95-96 / 97-98). – – Manual or automatic reset selectable – – Phase loss sensitive acc. to IEC/EN 60947-4-1 – – TEST and STOP function – Trip indication on the front – – Temperature compensation – – Suitable for three- and single-phase applications Ordering details 2CDC231025F0013 Setting range 1SFC151402F0001 T16 + DB16 KPR-101L 2CDC231002F0011 DB16 Trip class Type Order code 0.5 A, fuse type T 1.0 A, fuse type T 1.0 A, fuse type T 1.0 A, fuse type T 2.0 A, fuse type gG 2.0 A, fuse type gG 4.0 A, fuse type gG 6.0 A, fuse type gG 6.0 A, fuse type gG 10.0 A, fuse type gG 10.0 A, fuse type gG 10.0 A, fuse type gG 20.0 A, fuse type gG 20.0 A, fuse type gG 35.0 A, fuse type gG 35.0 A, fuse type gG 40.0 A, fuse type gG 40.0 A, fuse type gG 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 T16-0.13 T16-0.17 T16-0.23 T16-0.31 T16-0.41 T16-0.55 T16-0.74 T16-1.0 T16-1.3 T16-1.7 T16-2.3 T16-3.1 T16-4.2 T16-5.7 T16-7.6 T16-10 T16-13 T16-16 1SAZ711201R1005 1SAZ711201R1008 1SAZ711201R1009 1SAZ711201R1013 1SAZ711201R1014 1SAZ711201R1017 1SAZ711201R1021 1SAZ711201R1023 1SAZ711201R1025 1SAZ711201R1028 1SAZ711201R1031 1SAZ711201R1033 1SAZ711201R1035 1SAZ711201R1038 1SAZ711201R1040 1SAZ711201R1043 1SAZ711201R1045 1SAZ711201R1047 Weight (1 pce) kg 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.104 0.104 0.104 Ordering details accessories Suitable for Description Type Order code T16 T16 Single mounting kit Reset push button* DB16 KPR-101L 1SAZ701901R0001 1SFA616162R1014 Weight (1 pce) kg 0.032 0.027 *Note: for more information see cataloge 1SFC151004C0201 Main dimensions 8.6 9.1 0.34" 0.36" 36.9 0.05" 1.45" 2.4 0.09" 3.02" 1.2 mm, inches 14.4 45 T16 7/4 | ABB 12.35 0.36" 0.32" 1.77" 0.57" 0.49" 35.6 1.4" 48.2 1.9" 53.5 2.11" 2CDC106036C0201 9.1 8.1 2CDC232008F0008 76.7 7 A 0.10 ... 0.13 0.13 ... 0.17 0.17 ... 0.23 0.23 ... 0.31 0.31 ... 0.41 0.41 ... 0.55 0.55 ... 0.74 0.74 ... 1.00 1.00 ... 1.30 1.30 ... 1.70 1.70 ... 2.30 2.30 ... 3.10 3.10 ... 4.20 4.20 ... 5.70 5.70 ... 7.60 7.60 ... 10.0 10.0 ... 13.0 13.0 ... 16.0 Short-circuit protective device T16 thermal overload relays Technical data Main circuit – Utilization characteristics according to IEC/EN Type Standards Rated operational voltage Ue T16 IEC/EN 60947–4–1, IEC/EN 60947-5-1, IEC/EN 60947-1 690 V AC - V DC 50/60 Hz 10 3 100 % Up to 15 operations/h, see "Technical diagram – Intermittent periodic duty" 6 kV 690 V AC Rated frequency Trip class Number of poles Duty time Operating frequency without early tripping Rated impulse withstand voltage Uimp Rated insulation voltage Ui Auxiliary circuit according to IEC/EN Type Rated operational voltage Ue Conventional free air thermal current Ith Rated frequency Number of poles Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 110-120 V 220-230-240 V 440 V 480-500 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 24 V 60 V 110-120-125 V 250 V Minimum switching capacity Short-circuit protective device Rated impulse withstand voltage Uimp Rated insulation voltage Ui T16 600 V N.C., 95-96 6 A N.O., 97-98 4 A DC, 50/60 Hz 1 N.O. + 1 N.C. 3.00 0.75 3.00 0.75 0.75 0.75 N.C., 95-96 0.75 N.O., 97-98 0.75 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 7 A A A A A A A A 1.25 A 1.25 A 0.55 A 0.55 A 0.55 A 0.55 A 0.27 A 0.27 A 17 V / 3 mA N.C., 95-96 6 A, fuse type gG N.O., 97-98 4 A, fuse type gG 6 kV 690 V N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 Technical diagram – Intermittent periodic duty (Op/h) 140 120 s 0.5 80 ta ta = .5 3s s 5s 0 0 20 40 60 80 duty ratio 100 (%) 2CDC106036C0201 20 =1 s ta = 1 ta 40 2CDC232004F0214 60 = switching frequency ta = 100 ta: Motor starting time ABB | 7/5 T16 thermal overload relays Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Trip rating Full load amps (FLA) Short-circuit rating RMS symmetrical Short-circuit protective device T16 UL 508, CSA 22.2 No. 14 600 V AC 125 % of FLA See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" Auxiliary circuit according to UL/CSA Type Contact rating N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 Conventional thermal current T16 B600, Q300 D300, Q300 5A 2.5 A Full load amps and short-circuit protective device Type T16-0.13 T16-0.17 T16-0.23 T16-0.31 T16-0.41 T16-0.55 T16-0.74 T16-1.0 T16-1.3 T16-1.7 T16-2.3 T16-3.1 T16-4.2 T16-5.7 T16-7.6 T16-10 T16-13 T16-16 0.13 0.17 0.23 0.31 0.41 0.55 0.74 1.00 1.30 1.70 2.30 3.10 4.20 5.70 7.60 10.0 13.0 16.0 A A A A A A A A A A A A A A A A A A Short-circuit protective device 480 / 600 V AC Short circuit rating RMS Fuse type symmetrical 18 kA 1 A, K5 18 kA 1 A, K5 18 kA 1 A, K5 18 kA 3 A, K5 18 kA 3 A, K5 18 kA 3 A, K5 18 kA 3 A, K5 18 kA 6 A, K5 18 kA 6 A, K5 18 kA 6 A, K5 18 kA 10 A, K5 18 kA 10 A, K5 18 kA 15 A, K5 18 kA 20 A, K5 18 kA 25 A, K5 18 kA 35 A, K5 18 kA 40 A, K5 18 kA 60 A, K5 480 / 600 V AC Short circuit rating RMS symmetrical 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA Fuse type 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 45 45 45 A, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A, A, Class Class Class Class Class Class Class Class Class Class Class Class Class Class Class Class Class Class J J J J J J J J J J J J J J J J J J 2CDC106036C0201 7 Full load amps (FLA) 7/6 | ABB T16 thermal overload relays Technical data General technical data Type Pollution degree Phase loss sensitive Ambient air temperature Operation T16 3 Yes Open - compensated Open -25 ... +60 °C -25 ... +60 °C -50 ... +80 °C Acc. to IEC/EN60947-4-1 2000 m 25g / 11 ms 3g / 3 ... 150 Hz Position 1-5 Mount on the contactor and tighten the screws of the main circuit terminals or with single mounting kit on DIN rail (35 mm) IP20 IP10 Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 Mounting position Mounting Housing Main circuit terminals Degree of protection Electrical connection Main circuit Type Connecting capacity T16 Rigid Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA 1x 2x 1 x or 2 x 1 x or 2 x 1 x or 2 x Stripping length Tightening torque Recommended screw driver 7 1) Only connect two different "conductor/wire" cross-sections, if they are within the indicated ranges Auxiliary circuit Type Connecting capacity T16 Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Stripping length Tightening torque Recommended screw driver 1 x or 2 x 1 x or 2 x 1x 2x 1 x or 2 x 1 x or 2 x 1 x or 2 x 0.75 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 1.5 mm² 0.75 ... 1 mm² or 1 ... 2.5 mm² AWG 18-12 AWG 18-12 9 mm 1.1 ... 1.5 Nm / 9 … 13 Ib.in M3 (Pozidriv 2) 2CDC106036C0201 1) 0.75 ... 4 mm² 0.75 ... 1.5 mm² or 1.5 ... 4 mm² 0.75 ... 4 mm² AWG 18-10 AWG 18-10 12 mm 1.1 ... 1.5 Nm / 9 … 13 Ib.in M4 (Pozidriv 2) ABB | 7/7 TF42 thermal overload relays 0.10 to 38.0 A 2CDC231006F0013 Description TF42 The TF42 thermal overload relays are economic electromechanical protection devices for the main circuit. They offer reliable protection for motors in the event of overload or phase failure. The devices have trip class 10. The thermal overload relays are three pole relays with bimetal tripping elements. The motor current flows through the bimetal tripping elements and heats them directly and indirectly. In case of an overload (over current), the bimetal elements bent as a result of the heating. This leads to a release of the relay and a change of the contacts switching position (95-96 / 97-98). – – Manual or automatic reset selectable – – Phase loss sensitive acc. to IEC/EN 60947-4-1 – – TEST and STOP function – Trip indication on the front – – Temperature compensation – – Suitable for three- and single-phase applications Ordering details 2CDC231001F0011 Setting range DB42 2CDC231026F0013 7 1SFC151402F0001 TF42 + DB42 KPR-101L A 0.10 ... 0.13 0.13 ... 0.17 0.17 ... 0.23 0.23 ... 0.31 0.31 ... 0.41 0.41 ... 0.55 0.55 ... 0.74 0.74 ... 1.00 1.00 ... 1.30 1.30 ... 1.70 1.70 ... 2.30 2.30 ... 3.10 3.10 ... 4.20 4.20 ... 5.70 5.70 ... 7.60 7.60 ... 10.0 10.0 ... 13.0 13.0 ... 16.0 16.0 ... 20.0 20.0 ... 24.0 24.0 ... 29.0 29.0 ... 35.0 35.0 ... 38.0/40.0 Short-circuit protective device Trip class Type Order code 0.5 A, fuse type T 1.0 A, fuse type T 1.0 A, fuse type T 1.0 A, fuse type T 2.0 A, fuse type gG 2.0 A, fuse type gG 4.0 A, fuse type gG 6.0 A, fuse type gG 6.0 A, fuse type gG 10.0 A, fuse type gG 10.0 A, fuse type gG 10.0 A, fuse type gG 20.0 A, fuse type gG 20.0 A, fuse type gG 35.0 A, fuse type gG 35.0 A, fuse type gG 40.0 A, fuse type gG 40.0 A, fuse type gG 63.0 A, fuse type gG 63.0 A, fuse type gG 63.0 A, fuse type gG 80.0 A, fuse type gG 80.0 A, fuse type gG 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 TF42-0.13 TF42-0.17 TF42-0.23 TF42-0.31 TF42-0.41 TF42-0.55 TF42-0.74 TF42-1.0 TF42-1.3 TF42-1.7 TF42-2.3 TF42-3.1 TF42-4.2 TF42-5.7 TF42-7.6 TF42-10 TF42-13 TF42-16 TF42-20 TF42-24 TF42-29 TF42-35 TF42-38 1SAZ721201R1005 1SAZ721201R1008 1SAZ721201R1009 1SAZ721201R1013 1SAZ721201R1014 1SAZ721201R1017 1SAZ721201R1021 1SAZ721201R1023 1SAZ721201R1025 1SAZ721201R1028 1SAZ721201R1031 1SAZ721201R1033 1SAZ721201R1035 1SAZ721201R1038 1SAZ721201R1040 1SAZ721201R1043 1SAZ721201R1045 1SAZ721201R1047 1SAZ721201R1049 1SAZ721201R1051 1SAZ721201R1052 1SAZ721201R1053 1SAZ721201R1055 Weight (1 pce) kg 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.130 0.145 0.145 0.145 0.145 0.145 Ordering details accessories Suitable for Description Type Order code TF42 TF42 Single mounting kit Reset push button* DB42 KPR-101L 1SAZ701902R0001 1SFA616162R1014 Weight (1 pce) kg 0.087 0.027 *Note: for more information see cataloge 1SFC151004C0201 Main dimensions 0.64" 2.3 0.09" mm, inches 11.7 0.46" 50.25 2.7 0.11" 1.98" TF42 7/8 | ABB 12.35 0.49" 14.4 0.57" 45 1.77" 52.6 2.07" 66.4 70.5 2.61" 2.78" 2CDC106046C0201 9.1 0.36" 8.1 0.32" 2CDC232005F0009 88.3 3.48" 16.2 TF42 thermal overload relays Technical data Main circuit – Utilization characteristics according to IEC/EN Type Standards Rated operational voltage Ue Rated frequency Trip class Number of poles Duty time Operating frequency without early tripping Rated impulse withstand voltage Uimp Rated insulation voltage Ui TF42 IEC/EN 60947–4–1, IEC/EN 60947-5-1, IEC/EN 60947-1 690 V AC 50/60 Hz 10 3 100 % Up to 15 operations/h, see "Technical diagram – Intermittent periodic duty" 6 kV 690 V AC Auxiliary circuit according to IEC/EN Type Rated operational voltage Ue Conventional free air thermal current Ith Rated frequency Number of poles Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 110-120 V 220-230-240 V 440 V 480-500 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 24 V 110-120-125 V 250 V Minimum switching capacity Short-circuit protective device Rated impulse withstand voltage Uimp Rated insulation voltage Ui TF42 600 V N.C., 95-96 6 A N.O., 97-98 4 A DC, 50/60 Hz 1 N.O. + 1 N.C. 3.00 0.75 3.00 0.75 0.75 0.75 N.C., 95-96 0.75 N.O., 97-98 0.75 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 A A A A A A A A 7 1.25 A 1.25 A 0.55 A 0.55 A 0.27 A 0.27 A 17 V / 3 mA N.C., 95-96 6 A, fuse type gG N.O., 97-98 4 A, fuse type gG 6 kV 690 V N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 Technical diagram – Intermittent periodic duty (Op/h) 140 120 s 0.5 80 ta 20 ta = =1 s ta = 1 ta 40 .5 3s s 5s 0 0 20 40 60 80 duty ratio 100 (%) 2CDC232004F0214 60 = switching frequency ta = 100 2CDC106046C0201 ta: Motor starting time ABB | 7/9 TF42 thermal overload relays Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Trip rating Full load amps (FLA) Short-circuit rating RMS symmetrical Short-circuit protective device TF42 UL 508, CSA 22.2 No. 14 600 V AC 125 % of FLA See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" Auxiliary circuit according to UL/CSA Type Contact rating N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 Conventional thermal current TF42 B600, Q300 D300, Q300 5A 2.5 A Full load amps and short-circuit protective device Type TF42-0.13 TF42-0.17 TF42-0.23 TF42-0.31 TF42-0.41 TF42-0.55 TF42-0.74 TF42-1.0 TF42-1.3 TF42-1.7 TF42-2.3 TF42-3.1 TF42-4.2 TF42-5.7 TF42-7.6 TF42-10 TF42-13 TF42-16 TF42-20 TF42-24 TF42-29 TF42-35 TF42-38 0.13 0.17 0.23 0.31 0.41 0.55 0.74 1.00 1.30 1.70 2.30 3.10 4.20 5.70 7.60 10.0 13.0 16.0 20.0 24.0 29.0 35.0 38.0 A A A A A A A A A A A A A A A A A A A A A A A Short-circuit protective device 480 / 600 V AC Short circuit rating RMS Fuse type symmetrical 18 kA 1 A, K5 18 kA 1 A, K5 18 kA 1 A, K5 18 kA 3 A, K5 18 kA 3 A, K5 18 kA 3 A, K5 18 kA 3 A, K5 18 kA 6 A, K5 18 kA 6 A, K5 18 kA 6 A, K5 18 kA 10 A, K5 18 kA 10 A, K5 18 kA 15 A, K5 18 kA 20 A, K5 18 kA 25 A, K5 18 kA 35 A, K5 18 kA 40 A, K5 18 kA 60 A, K5 18 kA 80 A, K5 18 kA 80 A, K5 18 kA 100 A, K5 18 kA 150 A, K5 18 kA 150 A, K5 480 / 600 V AC Short circuit rating RMS symmetrical 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA Fuse type 30 A, Class J 30 A, Class J 30 A, Class J 30 A, Class J 30 A, Class J 30 A, Class J 30 A, Class J 30 A, Class J 30 A, Class J 30 A, Class J 30 A, Class J 30 A, Class J 30 A, Class J 30 A, Class J 30 A, Class J 45 A, Class J 45 A, Class J 45 A, Class J 60 A, Class J 60 A, Class J 100 A, Class J 175 A, Class J 175 A, Class J 2CDC106046C0201 7 Full load amps (FLA) 7/10 | ABB TF42 thermal overload relays Technical data General technical data Type Pollution degree Phase loss sensitive Ambient air temperature Operation TF42 3 Yes Open - compensated Open -25 ... +60 °C -25 ... +60 °C -50 ... +80 °C Acc. to IEC/EN60947-4-1 2000 m 25g / 11 ms 3g / 3 ... 150 Hz Position 1-5 Mount on the contactor and tighten the screws of the main circuit terminals or with single mounting kit on DIN rail (35 mm) IP20 IP10 Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 Mounting position Mounting Housing Main circuit terminals Degree of protection Electrical connection Main circuit Type TF42 (TF42-0.13 … TF42-16) TF42 (TF42-20 … TF42-38) 0.75 ... 4 mm² 0.75 ... 4 mm² AWG 18-10 AWG 18-10 12 mm 1.5 - 2.5 Nm / 13 … 22 Ib.in M4 (Pozidriv 2) 1.5 ... 2.5 mm² or 2.5 ... 10 mm² 2.5 ... 4 mm² or 4 ... 6 mm² AWG 14-6 AWG 14-6 7 Connecting capacity Rigid Flexible with insulated ferrule Stranded acc. to UL/CSA Flexible acc. to UL/CSA 1 x or 2 x 1 x or 2 x 1 x or 2 x 1 x or 2 x Stripping length Tightening torque Recommended screw driver 2.5 - 2.7 Nm / 22 Ib.in Only connect two different "conductor/wire" cross-sections, if they are within the indicated ranges Auxiliary circuit Type Connecting capacity TF42 Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Stripping length Tightening torque Recommended screw driver 1 x or 2 x 1 x or 2 x 1x 2x 1 x or 2 x 1 x or 2 x 1 x or 2 x 0.75 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 1.5 mm² 0.75 ... 1 mm² or 1 ... 2.5 mm² AWG 18-12 AWG 18-12 9 mm 1.1 ... 1.5 Nm / 9 … 13 Ib.in M3 (Pozidriv 2) 2CDC106046C0201 1) 1) ABB | 7/11 TF65 thermal overload relays 22.0 to 67.0 A 2CDC231004F0013 Description TF65 The TF65 thermal overload relays are economic electromechanical protection devices for the main circuit. They offer reliable protection for motors in the event of overload or phase failure. The devices have trip class 10. The thermal overload relays are three pole relays with bimetal tripping elements. The motor current flows through the bimetal tripping elements and heats them directly and indirectly. In case of an overload (over current), the bimetal elements bent as a result of the heating. This leads to a release of the relay and a change of the contacts switching position (95-96 / 97-98). – – Manual or automatic reset selectable – – Phase loss sensitive acc. to IEC/EN 60947-4-1 – – TEST and STOP function – Trip indication on the front – – Temperature compensation – – Suitable for three- and single-phase applications 1SFC151402F0001 Ordering details KPR-101L 7 Setting range A 22.0 ... 28.0 25.0 ... 33.0 30.0 ... 40.0 36.0 ... 47.0 44.0 ... 53.0 50.0 ... 60.0 57.0 ... 67.0 Short-circuit protective device Trip class Type Order code 80 A, gG Type Fuses 80 A, gG Type Fuses 100 A, gG Type Fuses 125 A, gG Type Fuses 125 A, gG Type Fuses 125 A, gG Type Fuses 160 A, gG Type Fuses 10 10 10 10 10 10 10 TF65-28 TF65-33 TF65-40 TF65-47 TF65-53 TF65-60 TF65-67 1SAZ811201R1001 1SAZ811201R1002 1SAZ811201R1003 1SAZ811201R1004 1SAZ811201R1005 1SAZ811201R1006 1SAZ811201R1007 Weight (1 pce) kg 0.456 0.456 0.456 0.456 0.456 0.466 0.466 Ordering details accessories Suitable for Description Type Order code TF65 Reset push button* KPR-101L 1SFA616162R1014 Weight (1 pce) kg 0.027 *Note: for more information see cataloge 1SFC151004C0201 Main dimensions mm, inches 34.8 1.37" 10.1 0.40" 55.7 2.19" 4 0.08" 10.4 37.4 54.9 TF65 7/12 | ABB 0.41" 1.47" 2.16" 6T3 83.5 3.29" 102.8 4.05" 106.1 4.18" 106.9 4.21" 2CDC106063C0201 4T2 2CDC232005F0009 2T1 18.9 0.74" 65 2.56" 16.6 0.65" 46 1.81" 67.8 2.67" 101.4 87.7 3.45" 3.45" 7 0.28" TF65 thermal overload relays Technical data Main circuit – Utilization characteristics according to IEC/EN Type Standards Rated operational voltage Ue Rated frequency Trip class Number of poles Duty time Operating frequency without early tripping Rated impulse withstand voltage Uimp Rated insulation voltage Ui TF65 IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1 690 V AC 50/60 Hz 10 3 100 % Up to 15 operations/h, see "Technical diagram – Intermittent periodic duty" 8 kV 690 V Auxiliary circuit according to IEC/EN Type Rated operational voltage Ue Conventional free air thermal current Ith Rated frequency Number of poles Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 110-120 V 220-230-240 V 440 V 480-500 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 24 V 110-120-125 V 250 V Minimum switching capacity Short-circuit protective device Rated impulse withstand voltage Uimp Rated insulation voltage Ui TF65 600 V N.C., 95-96 6 A N.O., 97-98 4 A DC, 50/60 Hz 1 N.O. + 1 N.C. 3.00 0.75 3.00 0.75 0.75 0.75 N.C., 95-96 0.75 N.O., 97-98 0.75 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 A A A A A A A A 7 1.25 A 1.25 A 0.55 A 0.55 A 0.27 A 0.27 A 17 V / 3 mA N.C., 95-96 6 A, gG Type Fuses N.O., 97-98 4 A, gG Type Fuses 6 kV 690 V N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 Technical diagram – Intermittent periodic duty (Op/h) 140 120 s 0.5 80 ta 20 ta = =1 s ta = 1 ta 40 .5 3s s 5s 0 0 20 40 60 80 duty ratio 100 (%) 2CDC232004F0214 60 = switching frequency ta = 100 2CDC106063C0201 ta: Motor starting time ABB | 7/13 TF65 thermal overload relays Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Trip rating Full load amps (FLA) Short-circuit rating RMS symmetrical Short-circuit protective device TF65 UL 60947-1, UL 60947-4-1 600 V AC 125 % of FLA See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" Auxiliary circuit according to UL/CSA Type Contact rating N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 Conventional thermal current TF65 B600, Q600 D300, Q600 6A 4A Full load amps and short-circuit protective device Type TF65-28 TF65-33 TF65-40 TF65-47 TF65-53 TF65-60 TF65-67 28 33 40 47 53 60 67 A A A A A A A Short-circuit protective device 480 / 600 V AC Short circuit rating RMS Fuse type symmetrical 5 kA 100 A, K5 5 kA 100 A, K5 5 kA 100 A, K5 5 kA 125 A, K5 10 kA 125 A, K5 10 kA 150 A, K5 10 kA 150 A, K5 / / / / / / / RK5 RK5 RK5 RK5 RK5 RK5 RK5 480 / 600 V AC Short circuit rating RMS symmetrical 18 kA 18 kA 18 kA 18 kA 18 kA 18 kA 18 kA Fuse type 110 110 110 125 125 150 150 A, A, A, A, A, A, A, Class Class Class Class Class Class Class J J J J J J J 2CDC106063C0201 7 Full load amps (FLA) 7/14 | ABB TF65 thermal overload relays Technical data General technical data Type Pollution degree Phase loss sensitive Ambient air temperature Operation TF65 3 Yes Open - compensated Open -25 ... +60 °C -25 ... +60 °C -50 ... +80 °C Acc. to IEC/EN 60947-4-1 2000 m 25g / 11 ms 5g / 3 ... 150 Hz Position 1 Mount on the contactor and tighten the screws of the main circuit terminals or with single mounting kit on DIN rail (35 mm) IP20 IP10 Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 Mounting position Mounting Housing Main circuit terminals Degree of protection Electrical connection Main circuit Type Connecting capacity TF65 Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA 1 x or 2 x 1x 1 x or 2 x 1x 1 x or 2 x 1x 1 x or 2 x 1x 1x 2x 1x 2x Stripping length Tightening torque Recommended screw driver Only connect two different "conductor/wire" cross-sections, if they are within the indicated ranges Auxiliary circuit Type Connecting capacity TF65 Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Stripping length Tightening torque Recommended screw driver 1 x or 2 x 1 x or 2 x 1x 2x 1 x or 2 x 1 x or 2 x 1 x or 2 x 0.75 ... 4 mm² 0.75 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 1.5 mm² 0.75 ... 1 mm² or 1 ... 2.5 mm² AWG 18 ... 12 AWG 18 ... 12 9 mm 1.1 ... 1.5 Nm / 9 … 13 Ib.in M3 (Pozidriv 2) 2CDC106063C0201 1) 7 2.5 ... 16 mm² 2.5 ... 35 mm² 2.5 ... 10 mm² 2.5 ... 35 mm² 2.5 ... 4 mm² 2.5 ... 35 mm² 2.5 ... 16 mm² 2.5 ... 35 mm² AWG 12 ... 2 AWG 12 ... 6 AWG 12 ... 2 AWG 12 ... 6 17 mm 4.0 - 4.5 Nm / 35 ... 40 Ib.in M6 (Pozidriv 2) ABB | 7/15 TF96 thermal overload relays 40.0 to 96.0 A 2CDC231005F0013 Description TF96 The TF96 thermal overload relays are economic electromechanical protection devices for the main circuit. They offer reliable protection for motors in the event of overload or phase failure. The devices have trip class 10. The thermal overload relays are three pole relays with bimetal tripping elements. The motor current flows through the bimetal tripping elements and heats them directly and indirectly. In case of an overload (over current), the bimetal elements bent as a result of the heating. This leads to a release of the relay and a change of the contacts switching position (95-96 / 97-98). – – Manual or automatic reset selectable – – Phase loss sensitive acc. to IEC/EN 60947-4-1 – – TEST and STOP function – Trip indication on the front – – Temperature compensation – – Suitable for three- and single-phase applications 1SFC151402F0001 Ordering details KPR-101L 7 Setting range A 40.0 ... 51.0 48.0 ... 60.0 57.0 ... 68.0 65.0 ... 78.0 75.0 ... 87.0 84.0 ... 96.0 Short-circuit protective device Trip class Type Order code 125 A, gG Type Fuses 160 A, gG Type Fuses 160 A, gG Type Fuses 200 A, gG Type Fuses 200 A, gG Type Fuses 250 A, gG Type Fuses 10 10 10 10 10 10 TF96-51 TF96-60 TF96-68 TF96-78 TF96-87 TF96-96 1SAZ911201R1001 1SAZ911201R1002 1SAZ911201R1003 1SAZ911201R1004 1SAZ911201R1005 1SAZ911201R1006 Weight (1 pce) kg 0.620 0.620 0.620 0.620 0.620 0.630 Ordering details accessories Suitable for Description Type Order code TF96 Reset push button* KPR-101L 1SFA616162R1014 Weight (1 pce) kg 0.027 *Note: for more information see cataloge 1SFC151004C0201 Main dimensions 12.1 0.47" mm, inches 45.8 1.80" 58.5 2.30" 67.5 2.66" 54.9 44.9 1.77" 69.9 7/16 | ABB 2.16" 2.75" 83.5 3.29" 102.8 4.05" 106.1 4.18" 106.9 4.21" 2CDC106064C0201 17.9 0.70" 6T3 2CDC232005F0009 4T2 18.9 0.74" 2T1 TF96 2.5 0.10" 16.6 0.65" 46 1.81" 70.3 2.77" 106.3 60.6 3.57" 4.19" 10 0.39" TF96 thermal overload relays Technical data Main circuit – Utilization characteristics according to IEC/EN Type Standards Rated operational voltage Ue Rated frequency Trip class Number of poles Duty time Operating frequency without early tripping Rated impulse withstand voltage Uimp Rated insulation voltage Ui TF96 IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1 690 V AC 50/60 Hz 10 3 100 % Up to 15 operations/h, see "Technical diagram – Intermittent periodic duty" 8 kV 690 V Auxiliary circuit according to IEC/EN Type Rated operational voltage Ue Conventional free air thermal current Ith Rated frequency Number of poles Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 110-120 V 220-230-240 V 440 V 480-500 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 24 V 110-120-125 V 250 V Minimum switching capacity Short-circuit protective device Rated impulse withstand voltage Uimp Rated insulation voltage Ui TF96 600 V N.C., 95-96 6 A N.O., 97-98 4 A DC, 50/60 Hz 1 N.O. + 1 N.C. 3.00 0.75 3.00 0.75 0.75 0.75 N.C., 95-96 0.75 N.O., 97-98 0.75 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 A A A A A A A A 7 1.25 A 1.25 A 0.55 A 0.55 A 0.27 A 0.27 A 17 V / 3 mA N.C., 95-96 6 A, fuse type gG N.O., 97-98 4 A, fuse type gG 6 kV 690 V N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 Technical diagram – Intermittent periodic duty (Op/h) 140 120 s 0.5 80 ta 20 ta = =1 s ta = 1 ta 40 .5 3s s 5s 0 0 20 40 60 80 duty ratio 100 (%) 2CDC232004F0214 60 = switching frequency ta = 100 2CDC106064C0201 ta: Motor starting time ABB | 7/17 TF96 thermal overload relays Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Trip rating Full load amps (FLA) Short-circuit rating RMS symmetrical Short-circuit protective device TF96 UL 60947-1, UL 60947-4-1 600 V AC 125 % of FLA See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" Auxiliary circuit according to UL/CSA Type Contact rating N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 Conventional thermal current TF96 B600, Q600 D300, Q600 6A 4A Full load amps and short-circuit protective device Type 51 60 68 78 87 96 A A A A A A Short-circuit protective device 480 / 600 V AC Short circuit rating RMS Fuse type symmetrical 5 kA 150 A, K5 10 kA 150 A, K5 10 kA 150 A, K5 10 kA 175 A, K5 10 kA 200 A, K5 10 kA 250 A, K5 / / / / / / RK5 RK5 RK5 RK5 RK5 RK5 480 / 600 V AC Short circuit rating RMS symmetrical 18 kA 18 kA 18 kA 18 kA 18 kA 18 kA Fuse type 125 150 150 175 200 200 A, A, A, A, A, A, Class Class Class Class Class Class J J J J J J 2CDC106064C0201 7 TF96-51 TF96-60 TF96-68 TF96-78 TF96-87 TF96-96 Full load amps (FLA) 7/18 | ABB TF96 thermal overload relays Technical data General technical data Type Pollution degree Phase loss sensitive Ambient air temperature Operation TF96 3 Yes Open - compensated Open -25 ... +60 °C -25 ... +60 °C -50 ... +80 °C Acc. to IEC/EN60947-4-1 2000 m 25g / 11 ms 5g / 3 ... 150 Hz Position 1 Mount on the contactor and tighten the screws of the main circuit terminals or with single mounting kit on DIN rail (35 mm) IP20 IP10 Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 Mounting position Mounting Housing Main circuit terminals Degree of protection Electrical connection Main circuit Type Connecting capacity TF96 Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA 1 x or 2 x 1x 1 x or 2 x 1x 1 x or 2 x 1x 1 x or 2 x 1x 1x 2x 1x 2x Stripping length Tightening torque Recommended screw driver 7 Only connect two different "conductor/wire" cross-sections, if they are within the indicated ranges Auxiliary circuit Type Connecting capacity TF96 Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Stripping length Tightening torque Recommended screw driver 1 x or 2 x 1 x or 2 x 1x 2x 1 x or 2 x 1 x or 2 x 1 x or 2 x 0.75 ... 4 mm² 0.75 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 1.5 mm² 0.75 ... 1 mm² or 1 ... 2.5 mm² AWG 18 ...12 AWG 18 ... 12 9 mm 1.1 ... 1.5 Nm / 9 … 13 Ib.in M3 (Pozidriv 2) 2CDC106064C0201 1) 6 ... 35 mm² 6 ... 50 mm² 6 ... 35 mm² 6 ... 50 mm² 6 ... 16 mm² 6 ... 50 mm² 6 ... 35 mm² 6 ... 50 mm² AWG 8 ... 1 AWG 8 ... 3 AWG 8 ... 1 AWG 8 ... 3 22 mm 6.5 - 9 Nm / 57 ... 80 Ib.in M8 (Hexagon) ABB | 7/19 TF140DU thermal overload relays 66 to 142 A 2CDC231012F0012 Description 1SFC151402F0001 TF140DU KPR-101L 7 The TF140DU thermal overload relays are economic electromechanical protection devices for the main circuit. They offer reliable protection for motors in the event of overload or phase failure. The devices have trip class 10A. The thermal overload relays are three pole relays with bimetal tripping elements. The motor current flows through the bimetal tripping elements and heats them directly and indirectly. In case of an overload (over current), the bimetal elements bent as a result of the heating. This leads to a release of the relay and a change of the contacts switching position (95-96 / 97-98). – – Manual or automatic reset selectable – – Phase loss sensitive acc. to IEC/EN 60947-4-1 – – TEST and STOP function – Trip indication on the front – – Temperature compensation – – Suitable for three- and single-phase applications Ordering details Setting range A 66 ... 90 80 ... 110 100 ... 135 110 ... 142 Short-circuit protective device Trip class Type Order code 200 A, fuse type gG 224 A, fuse type gG 224 A, fuse type gG 250 A, fuse type gG 10A 10A 10A 10A TF140DU-90 TF140DU-110 TF140DU-135 TF140DU-142 1SAZ431201R1001 1SAZ431201R1002 1SAZ431201R1003 1SAZ431201R1004 Weight (1 pce) kg 0.820 0.820 0.820 0.820 Ordering details accessories Suitable for Description Type Order code TF140DU Reset push button* KPR-101L 1SFA616162R1014 Weight (1 pce) kg 0.027 *Note: for more information see cataloge 1SFC151004C0201 Main dimensions mm, inches 89 3.5" 29.75 1.17" 37 19.9 0.78" 29.75 1.17" 6.4 3.5" 1.46" 5.5 0.22" 51 2.01" 4 0.16" 96 67.3 2.65" 95 4/T2 25 0.98" 6/T3 25 0.98" 6 0.24" 8 0.31" 126 TF140DU 7/20 | ABB 5.3 0.21" 50 1.97" 58.8 2.31" 4.96" 68 2.68" 80 3.15" 84.2 3.31" 2CDC106054C0201 2/T1 2CDC232008F0012 97 73.8 2.91" 98 82.3 3.24" 140 5.51" 13.45 0.53" TF140DU thermal overload relays Technical data Main circuit – Utilization characteristics according to IEC/EN Type Standards Rated operational voltage Ue Rated frequency Frequency range Trip class Number of poles Duty time Operating frequency without early tripping Rated impulse withstand voltage Uimp Rated insulation voltage Ui TF140DU IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1 690 V AC DC, 50/60 Hz 0 ... 400 Hz 10A 3 100 % Up to 15 operations/h, see "Technical diagram – Intermittent periodic duty" 8 kV 690 V Auxiliary circuit according to IEC/EN Type Rated operational voltage Ue Conventional free air thermal current Ith Rated frequency Number of poles Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 110-120 V 220-230-240 V 440 V 480-500 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 24 V 60 V 110-120-125 V 250 V Minimum switching capacity Short-circuit protective device Rated impulse withstand voltage Uimp Rated insulation voltage Ui TF140DU 500 V AC, 440 V DC N.C., 95-96 10 A N.O., 97-98 6 A DC, 50/60 Hz 1 N.O. + 1 N.C. 3.00 1.50 1.50 1.50 1.00 1.00 N.C., 95-96 1.00 N.O., 97-98 1.00 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 7 A A A A A A A A 1.25 A 1.25 A 0.25 A 0.25 A 0.25 A 0.25 A 0.12 A 0.04 A 17 V / 3 mA N.C., 95-96 10 A, fuse type gG N.O., 97-98 6 A, fuse type gG 6 kV 690 V N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 Technical diagram – Intermittent periodic duty (Op/h) 140 120 0.5 80 s ta .5 3s s 5s 0 0 20 40 60 80 duty ratio 100 (%) 2CDC106054C0201 20 ta = =1 s ta = 1 ta 40 2CDC232004F0214 60 = switching frequency ta = 100 ta: Motor starting time ABB | 7/21 TF140DU thermal overload relays Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Trip rating Full load amps (FLA) Short-circuit rating RMS symmetrical Short-circuit protective device TF140DU UL 508, CSA 22.2 No. 14, UL 600 V AC 125 % of FLA See table "Full load amps and See table "Full load amps and See table "Full load amps and 60947-4-1A short-circuit protective device" short-circuit protective device" short-circuit protective device" Auxiliary circuit according to UL/CSA Type Contact rating Conventional thermal current N.C., 95-96 N.O., 97-98 N.C./N.O. TF140DU B600 C300 10 A / 6 A Full load amps and short-circuit protective device Type TF140DU-90 TF140DU-110 TF140DU-135 TF140DU-142 / / / / RK5 RK5 RK5 RK5 480 / 600 V AC Short circuit rating RMS symmetrical 100 kA 100 kA 100 kA 100 kA Fuse type 250 250 250 250 A, A, A, A, Class Class Class Class J J J J 480 / 600 V AC Short circuit rating RMS symmetrical 100 kA 100 kA 100 kA 100 kA Listed circuit breaker 250 250 250 250 A A A A 2CDC106054C0201 7 Full load amps (FLA) Short-circuit protective device 480 / 600 V AC Short circuit rating Fuse type RMS symmetrical 90 A 10 kA 250 A, K5 110 A 10 kA 250 A, K5 135 A 10 kA 250 A, K5 142 A 10 kA 250 A, K5 7/22 | ABB TF140DU thermal overload relays Technical data General technical data Type Pollution degree Phase loss sensitive Ambient air temperature Operation TF140DU 3 Yes Open - compensated Open -25 ... +55 °C -25 ... +55 °C -40 ... +70 °C Acc. to IEC/EN 60947-4-1 2000 m 12g / 11 ms Position 1-5 Mount on the contactor and tighten the screws of the main circuit terminals IP20 IP00 Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Mounting position Mounting Degree of protection Housing Main circuit terminals Electrical connection Main circuit Type Connecting capacity TF140DU Rigid Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA 1x 2x 1x 2x 1 x or 2 x 1 x or 2 x Stripping length Tightening torque Recommended screw driver Auxiliary circuit Type Connecting capacity 16 ... 70 mm² 16 ... 70 mm² AWG 6-2/0 AWG 6-2/0 25 mm 8 ... 10 Nm / 77 ... 88 Ib.in M8 (Hexagon) 7 TF140DU Stripping length Tightening torque Recommended screw driver 1 x or 2 x 1 x or 2 x 1 x or 2 x 1 x or 2 x 1 x or 2 x 1 x or 2 x 0.75 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² AWG 18-14 AWG 18-14 9 mm 0.8 ... 1.3 Nm / 12 Ib.in M3.5 (Pozidriv 2) 2CDC106054C0201 Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA ABB | 7/23 TA200DU thermal overload relays 66 to 200 A 2CDC231016F0013 Description 1SFC151402F0001 TA200DU KPR-101L 7 The TA200DU thermal overload relays are economic electromechanical protection devices for the main circuit. They offer reliable protection for motors in the event of overload or phase failure. The devices have trip class 10A. The thermal overload relays are three pole relays with bimetal tripping elements. The motor current flows through the bimetal tripping elements and heats them directly and indirectly. In case of an overload (over current), the bimetal elements bent as a result of the heating. This leads to a release of the relay and a change of the contacts switching position (95-96 / 97-98). – – Manual or automatic reset selectable – – Phase loss sensitive acc. to IEC/EN 60947-4-1 – – TEST and STOP function – Trip indication on the front – – Temperature compensation – – Suitable for three- and single-phase applications Ordering details Setting range A 66 ... 90 80 ... 110 100 ... 135 110 ... 150 130 ... 175 150 ... 200 Short-circuit protective device Trip class Type Order code 200 A, fuse type gG / 125 A aM 224 A, fuse type gG / 160 A aM 224 A, fuse type gG / 200 A aM 250 A, fuse type gG / 200 A aM 315 A, fuse type gG / 250 A aM 315 A, fuse type gG / 250 A aM 10A 10A 10A 10A 10A 10A TA200DU-90 TA200DU-110 TA200DU-135 TA200DU-150 TA200DU-175 TA200DU-200 1SAZ421201R1001 1SAZ421201R1002 1SAZ421201R1003 1SAZ421201R1004 1SAZ421201R1005 1SAZ421201R1006 Weight (1 pce) kg 0.755 0.760 0.760 0.760 0.770 0.785 Ordering details accessories Suitable for Description Type Order code TA200DU TA200DU TA200DU Terminal shroud Single mounting kit Reset push button* LT200/A DB200 KPR-101L 1SAZ401901R1001 1SAZ401110R0001 1SFA616162R1014 Weight (1 pce) kg 0.090 0.225 0.027 *Note: for more information see cataloge 1SFC151004C0201 Main dimensions mm, inches 35 1.38" 35 1.38" 37 1.46" 23 0.91" 26 1.02" Ø8.5 Ø0.33" 3 0.12" 6 0.24" 42 1.65" 4.96" 2CDC106038C0201 4 0.16" 126 50 1.97" 42 1.65" 6 0.24" 61 2.4" 2CDC232021F0011 10 0.39" 8 0.31" Ø 5.3 Ø 0.21" Ø 11 Ø 0.43" 20 0.79" TA200DU 4 0.16" 82.3 3.24" 49.9 22.1 0.87" 80 3.15" 7/24 | ABB 32 1.26" 11 0.43" 68 2.68" 151 5.94" 30.9 1.22" 2" 5.5 0.22" TA200DU thermal overload relays Technical data Main circuit – Utilization characteristics according to IEC/EN Type Standards Rated operational voltage Ue Rated frequency Frequency range Trip class Number of poles Duty time Operating frequency without early tripping Rated impulse withstand voltage Uimp Rated insulation voltage Ui TA200DU IEC/EN 60947-1, IEC/EN 60947-4-1 690 V AC DC, 50/60 Hz 0 ... 400 Hz 10A 3 100 % Up to 15 operations/h, see "Technical diagram – Intermittent periodic duty" 6 kV 690 V AC Auxiliary circuit according to IEC/EN Type Rated operational voltage Ue Conventional free air thermal current Ith Rated frequency Number of poles Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 110-120 V 220-230-240 V 440 V 480-500 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 24 V 60 V 110-120-125 V 250 V Minimum switching capacity Short-circuit protective device Rated impulse withstand voltage Uimp Rated insulation voltage Ui TA200DU 500 V AC, 440 V DC N.C., 95-96 10 A N.O., 97-98 6 A DC, 50/60 Hz 1 N.O. + 1 N.C. 3.00 1.50 3.00 1.50 1.00 1.00 N.C., 95-96 1.00 N.O., 97-98 1.00 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 7 A A A A A A A A 1.25 A 1.25 A 0.25 A 0.25 A 0.25 A 0.25 A 0.12 A 0.04 A 17 V / 3 mA N.C., 95-96 10 A, fuse type gG N.O., 97-98 6 A, fuse type gG 6 kV 690 V N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 N.C., 95-96 N.O., 97-98 Technical diagram – Intermittent periodic duty (Op/h) 140 120 0.5 80 s ta .5 3s s 5s 0 0 20 40 60 80 duty ratio 100 (%) 2CDC106038C0201 20 ta = =1 s ta = 1 ta 40 2CDC232004F0214 60 = switching frequency ta = 100 ta: Motor starting time ABB | 7/25 TA200DU thermal overload relays Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Trip rating Full load amps (FLA) Short-circuit rating RMS symmetrical Short-circuit protective device TA200DU UL 508, CSA 22.2 No. 14 600 V AC 125 % of FLA See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" Auxiliary circuit according to UL/CSA Type Contact rating N.C., 95-96 N.O., 97-98 Conventional thermal current TA200DU C600 B600 5A Full load amps and short-circuit protective device Type TA200DU-90 TA200DU-110 TA200DU-135 TA200DU-150 TA200DU-175 TA200DU-200 90 A 110 A 135 A 150 A 175 A 200 A Short-circuit protective device 480 / 600 V AC Short circuit rating RMS symmetrical 10 kA 10 kA 10 kA 10 kA 10 kA 10 kA Fuse type 250 250 300 300 300 400 A, A, A, A, A, A, K5 K5 K5 K5 K5 K5 / / / / / / RK5 RK5 RK5 RK5 RK5 RK5 Listed circuit breaker 225 A 225 A 225 A 225 A 225 A 400 A Short circuit rating RMS symmetrical 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA Fuse type 250 250 250 250 300 400 A, A, A, A, A, A, Class Class Class Class Class Class J J J J J J Short circuit rating RMS symmetrical 100 kA 100 kA 100 kA 100 kA 100 kA 100 kA Listed circuit breaker 250 A 250 A 250 A 250 A 300 A 400 A 2CDC106038C0201 7 Full load amps (FLA) 7/26 | ABB TA200DU thermal overload relays Technical data General technical data Type Pollution degree Phase loss sensitive Ambient air temperature Operation TA200DU 3 Yes Open - compensated Open -25 ... +55 °C -25 ... +55 °C -40 ... +70 °C Acc. to IEC/EN60947-4-1 2000 m 12g / 15 ms Position 1-6 Mount on the contactor and tighten the screws of the main circuit terminals or with single mounting kit IP20 IP00 Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Mounting position Mounting Housing Main circuit terminals Degree of protection Electrical connection Main circuit Type Connecting capacity TA200DU Rigid Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Lugs 1x 1x 1x 1x Tightening torque Recommended screw driver Auxiliary circuit Type Connecting capacity 25 ... 120 mm² 25 ... 120 mm² AWG 4 ... 0000 AWG 4 ... 0000 L > 10 mm 25 Nm / 220 lb.in Open bars 7 TA200DU Stripping length Tightening torque Recommended screw driver 1 x or 2 x 1 x or 2 x 1 x or 2 x 1 x or 2 x 1 x or 2 x 1 x or 2 x 0.75 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² AWG 18 ... 14 AWG 18 ... 14 9 mm 0.8 ... 1.3 Nm / 12 Ib.in M3.5 (Pozidriv 2) 2CDC106038C0201 Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA ABB | 7/27 E16DU, E45DU, E80DU, E140DU electronic overload relays 0.10 to 140 A 2CDC231001F0007 Description The E16DU up to E140DU are self-supplied electronic overload relays, which means no extra external supply is needed. It offers reliable protection for motors in the event of overload or phase failure. Easy to use like a thermal overload relay and compatible with standard motor applications, the electronic overload relay is convincing, above all, due to its wide setting range, high accuracy, high operational temperature range and the possibility to select a trip class (10E, 20E, 30E). Further features are the temperature compensation, trip contact (N.C.), signal contact (N.O.), automatic or manual reset selectable, trip-free mechanism, STOP and TEST function and a trip indication. The overload relays are connected directly to the contactors. Ordering details E16DU-1.0 Setting range Short-circuit protective device Trip class Type Order code Weight (1 pce) kg E16DU electronic overload relays 0.10 … 0.32 1 A, fuse type gG 0.30 … 1.00 4 A, fuse type gG 0.80 … 2.70 10 A, fuse type gG 1.90 … 6.30 20 A, fuse type gG 5.70 … 18.9 50 A, fuse type gG 10E, 20E, 30E 10E, 20E, 30E 10E, 20E, 30E 10E, 20E, 30E 10E, 20E, 30E E16DU-0.32 E16DU-1.0 E16DU-2.7 E16DU-6.3 E16DU-18.9 1SAX111001R1101 1SAX111001R1102 1SAX111001R1103 1SAX111001R1104 1SAX111001R1105 0.150 0.150 0.150 0.150 0.150 E45DU electronic overload relays 9.00 … 30.0 160 A, fuse type gG 15.0 … 45.0 160 A, fuse type gG 10E, 20E, 30E 10E, 20E, 30E E45DU-30 E45DU-45 1SAX211001R1101 1SAX211001R1102 0.350 0.350 E80DU electronic overload relay 27.0 ... 80.0 A 250 A 10E, 20E, 30E E80DU-80 1SAX311001R1101 0.770 E140DU electronic overload relay 50.0 ... 140.0 A 400 A 10E, 20E, 30E E140DU-140 1SAX321001R1101 0.915 Weight (1 pce) kg 0.225 0.027 2CDC231002F0006 A 2CDC231003F0006 E80DU-80 Ordering details accessories Suitable for Description Type Order code E16DU, E45DU, E80DU. E140DU E16DU, E45DU, E80DU. E140DU Single mounting kit Reset push button* DB200 KPR-101L 1SAZ401110R0001 1SFA616162R1014 *Note: for more information see cataloge 1SFC151004C0201 mm, inches 2CDC231004F0006 Main dimensions 43.7 1.72" 37 1.46" 66.4 3 0.12" 2.61" 2.4 0.37” 36.3 1.43” 8 0.32" 14 0.55" 0.71" 1.04" 18 0.37” 0.59" 9.3 0.37” 15 9.3 26.5 42 1.65" 8 0.32" 3 0.12" 1.2 0.5” 0.32” 14 0.55” 10.3 0.41” 37.5 1.48” 5.65 0.22” 44.4 1.75” 53 57 2.09” 2.24” E16DU 3.71" 94.2 2.92" 74.2 16 0.63" 37 1.46" 58 2.28" 70 2.76" 5.5 3 0.12" 0.22" 74.5 2.93" 99 104.4 3.90" 4.11" E80DU KPR-101L 76 2.30“ E45DU 3.35" 18 0.71“ 16 0.63“ 3 1.46“ 58 2.28“ 70 2.76“ E140DU 5.5 0.22“ 3 0.12“ 74.5 2.93“ 99 3.90“ 104.4 4.11“ 2CDC107030C0201 85.1 94.2 3.71“ 38.4 1.51“ 85.2 3.35“ 79.7 3.14" 3 0.12“ 8 0.12“ 1.42" 57 2.24" 5 0.20“ 0.21“ 36 23.6 0.93" 38.4 1.51" 5.7 0.22" 2.66“ 2CDC232008F0011 45 1.77" 5.5 2CDC232009F0011 14 0.55" 61 2.40" 29.2 10.3 0.41" 8.5 0.33" 53.5 2.11" 1.15" 9.6 0.38" 2.5 0.10" 14 0.55“ 59.4 2.39" 27.3 1.07“ 6.8 0.27" 2 0.08“ 17 0.67" 4 0.16" 15 0.59“ 0.08" 67.6 74.2 2.92“ 2 49 1.93“ 59.7 2.35“ 37 1.46“ 13 0.51“ 7/28 | ABB 2CDC232010F0011 8.2 2CDC232007F0011 74.6 2.94” 85.2 3.35" 38.4 1.51" E140DU-140 1SFC151402F0001 7 E45DU-30 E16DU, E45DU, E80DU, E140DU electronic overload relays Technical data Main circuit – Utilization characteristics according to IEC/EN Type Standards Rated operational voltage Ue Rated frequency Trip class Number of poles Duty time Operating frequency without early tripping Rated impulse withstand voltage Uimp Rated insulation voltage Ui E16DU E45DU E80DU E140DU IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1 690 V AC 1000 V AC 50/60 Hz – not suitable for DC applications 10E, 20E, 30E, selectable 3 100 % Up to 15 operations/h, see "Technical diagram – Intermittent periodic duty" 6 kV 690 V AC 1000 V AC Auxiliary circuit according to IEC/EN Type Rated operational voltage Ue Conventional free air thermal current Ith Rated frequency Number of poles Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category E16DU 600 V AC / DC 6A DC, 50/60 Hz 1 N.C. + 1 N.O. 110-120 V 220-230-240 V 440 V 480-500 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 24 V 60 V 110-120-125 V 250 V Minimum switching capacity Short-circuit protective device Rated impulse withstand voltage Uimp Rated insulation voltage Ui 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 3.00 3.00 1.10 0.72 E45DU E80DU E140DU A A A A 7 1.50 A 0.55 A 0.55 A 0.27 A 12 V / 3 mA 6 A, fuse type gG 6 kV 690 V Technical diagram – Intermittent periodic duty 120 60 switching frequency 70 100 ta = 80 60 ta = 1 .5 s 40 ta = 3 s ta = 5 s 20 0 1s 0 20 40 60 duty ratio Trip class 10E 80 100 (%) ta =2 50 45 s ta = 30 ta = 8 s t a = 10 s t a = 12 s 10 0 4s ta = 6 20 0 20 =5 s 40 50 40 ta s 40 60 duty ratio Trip class 20E 80 100 (%) 35 30 25 ta = 20 15 ta = 1 5s t a = 20 s t a = 25 s 10 5 0 10 s 0 20 40 60 duty ratio 80 100 (%) Trip class 30E 2CDC107030C0201 80 s 140 Trip class 30E (Op/h) 2CDC232003F0214 .5 Trip class 20E (Op/h) 2CDC232001F0214 switching frequency =0 switching frequency ta 160 2CDC232002F0214 Trip class 10E (Op/h) ABB | 7/29 E16DU, E45DU, E80DU, E140DU electronic overload relays Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Trip rating Full load amps (FLA) Short-circuit rating RMS symmetrical Short-circuit protective device E16DU E45DU E80DU UL 508, CSA 22.2, No. 14 600 V AC 125 % of FLA See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" E140DU E16DU B600,Q300 5A E140DU Auxiliary circuit according to UL/CSA Type Contact rating Conventional thermal current E45DU E80DU Short-circuit protective device 480 V AC SCCR Fuse type 50 kA 2 A, Class J 50 kA 2 A, K5 / RK5 50 kA 4 A, K5 / RK5 50 kA 15 A, K5 / RK5 50 kA 30 A, K5 / RK5 600 V AC SCCR 5 kA 5 kA 5 kA 5 kA 5 kA Fuse type 2 A, K5 / RK5 2 A, K5 / RK5 4 A, K5 / RK5 15 A, K5 / RK5 30 A, K5 / RK5 Short-circuit protective device 600 V AC SCCR Fuse type 18 kA 150 A, K5 / RK5 18 kA 200 A, K5 / RK5 SCCR 100 kA 100 kA Fuse type 150 A, Class J 200 A, Class J Full load amps and short-circuit protective device Type E16DU-0.32 E16DU-1.0 E16DU-2.7 E16DU-6.3 E16DU-18.9 0.32 A 1.00 A 2.70 A 6.30 A 18.90 A Type Full load amps (FLA) E45DU-30 E45DU-45 30 A 45 A Type Full load amps (FLA) E80DU-80 80 A Type Full load amps (FLA) E140DU-140 140 A SCCR 100 kA 100 kA 100 kA 100 kA 100 kA Fuse type 2 A, Class J 2 A, Class J 4 A, Class J 15 A, Class J 30 A, Class J Short-circuit protective device 600 V AC SCCR Fuse type 18 kA 300 A, K5 / RK5 Short-circuit protective device 600 V AC SCCR Fuse type 18 kA 400 A, K5 / RK5 2CDC107030C0201 7 Full load amps (FLA) 7/30 | ABB E16DU, E45DU, E80DU, E140DU electronic overload relays Technical data General data E16DU 3 Yes Type Pollution degree Phase loss sensitive Ambient air temperature Operation Open - compensated Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 Mounting position Mounting E80DU E140DU -25 ... +70 °C -50 ... +85 °C Acc. to IEC/EN60947-4-1 2000 m 15g / 11 ms 5g / 3 … 150 Hz Position 1-6 Mount on the contactor and tighten the screws of the main circuit terminals or with single mounting kit IP20 IP20 Housing Main circuit terminals Degree of protection E45DU Electrical connection Rigid Flexible with insulated ferrule Stranded acc. to UL/CSA Flexible acc. to UL/CSA 1x 2x 1x 2x 1x 2x 1x 2x Stripping length Tightening torque Recommended screw driver Auxiliary circuit Type Connecting capacity Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Stripping length Tightening torque Recommended screw driver 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x E16DU E45DU E80DU 1 ... 4 mm² 1 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² AWG 16-10 AWG 16-10 AWG 16-10 AWG 16-10 9 mm 0.8 - 1.5 Nm / 7 Ib.in M3.5 (Pozidriv 2) 2.5 ... 16 mm² 6 ... 95 mm² 2.5 ... 16 mm² 6 ... 35 mm² 2.5 ... 10 mm² 6 ... 70 mm² 2.5 ... 10 mm² 6 ... 35 mm² AWG 14-6 AWG 10-0 AWG 14-6 AWG 14-6 AWG 10-0 AWG 14-6 13 mm 2.3 - 2.6 Nm / 22 Ib.in 6 - 6.5 Nm / 53 Ib.in M5 (Pozidriv 2) M8 (inbus 4) E16DU E45DU E80DU E140DU 6 ... 95 mm² 6 ... 35 mm² 6 ... 70 mm² 6 ... 35 mm² AWG 8-0 AWG 8-0 6 - 6.5 Nm / 53 Ib.in M8 (inbus 4) 7 E140DU 1 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² AWG 16-10 AWG 16-10 9 mm 0.8 ... 1.2 Nm / 7 Ib.in M3.5 (Pozidriv 2) 2CDC107030C0201 Main circuit Type Connecting capacity ABB | 7/31 E16DU, E45DU, E80DU, E140DU electronic overload relays Accessories Description 2CDC231003F0010 Single mounting kits are available as accessory for E16DU, E45DU, E80DU, and E140DU. The single mounting kits offer the possibility to mount the overload relay separately from the contactor. Ordering details Description Type Order code Weight (1 pce) kg Single mounting kits E16DU E45DU E80DU E140DU Single mounting kit Single mounting kit Single mounting kit Single mounting kit DB16E DB45E DB80E DB140E 1SAX101110R0001 1SAX201110R1001 1SAX301110R1001 1SAX301110R1002 0.035 0.090 0.145 0.145 2CDC231004F0010 DB16E Suitable for DB45E 2CDC231005F0010 7 DB80E mm, inches 98.5 3.88" 90.2 3.55" 35 1.38" 3 0.12" 2CDC231006F0010 Main dimensions 5.5 0.22" 4.5 0.18" 69.5 2.74" 65.2 2.57" 64.5 2.54" DB16E 5.5 0.22" 35 1.38" 45 1.77" 10.5 0.41" 94.2 3.70" 95.6 3.76" 99 3.90" 81.5 3.21" 37 1.46" 5.5 0.22" 139.5 5.50" DB140E 5.5 0.22" 4.3 0.17" 103 4.06" 104.4 4.11" 2CDC107030C0201 85.2 3.35" 62.5 2.46" 21.1 0.83" 37 1.46" 43.7 1.72" 70 2.76" 2CDC232029F0011 103 4.06" 104.4 4.11" 4.2 0.17" 94.2 3.71" 133.5 5.26" 85.2 3.35" 68.5 2.70" 4.3 0.17" 5 0.20" 5.5 0.22" 29.6 1.17" 2CDC232028F0011 5 0.20" 21.1 0.83" 62.5 2.46" 94.2 3.71" 4.2 0.17" 4.3 0.17" 68.5 2.70" 4.3 0.17" 29.6 1.17" 37 1.46" 43.7 1.72" 70 2.76" 33.7 1.33" 99 3.90" 33.7 1.33" 5.5 0.22" 7/32 | ABB 2CDC232027F0011 51 2.01" 57 2.44" 20.2 0.80" 3 0.12" 14 0.55" 14 0.55" DB45E 37 1.46" DB80E 61 2.40" 125.5 4.94" 4.2 0.17" 12.5 0.49" 68.5 2.70" 4.8 0.19" 5.5 0.22" 44.3 1.74" 29.6 1.17" 91 3.59" 50 1.97" 64.4 2.54" 14 0.55" 2CDC232030F0011 14 0.55" 41.7 1.64" 35.7 1.41" 4.2 0.17" 82.6 3.25" 113 4.45" DB140E 102.5 4.04" 14.5 0.57" EF19, EF45 electronic overload relays 0.10 to 45.0 A 1SBC101147F0010 Description The EF19 and EF45 are self-supplied electronic overload relays, which means no extra external supply is needed. It offers reliable protection for motors in the event of overload or phase failure. Easy to use like a thermal overload relay and compatible with standard motor applications, the electronic overload relay is convincing, above all, due to its wide setting range, high accuracy, high operational temperature range and the possibility to select a trip class (10E, 20E, 30E). Further features are the temperature compensation, trip contact (N.C.), signal contact (N.O.), automatic or manual reset selectable, trip-free mechanism, STOP and TEST function and a trip indication. The overload relays are connected directly to the contactors. Ordering details EF19-18.9 Setting range Short-circuit protective device Trip class Type Order code Weight (1 pce) kg EF19 electronic overload relays 0.10 … 0.32 1 A, fuse type gG 10E, 20E, 30E EF19-0.32 1SAX121001R1101 0.158 0.30 … 1.00 4 A, fuse type gG 10E, 20E, 30E EF19-1.0 1SAX121001R1102 0.158 0.80 … 2.70 10 A, fuse type gG 10E, 20E, 30E EF19-2.7 1SAX121001R1103 0.158 1.90 … 6.30 20 A, fuse type gG 10E, 20E, 30E EF19-6.3 1SAX121001R1104 0.158 5.70 … 18.9 50 A, fuse type gG 10E, 20E, 30E EF19-18.9 1SAX121001R1105 0.158 EF45 electronic overload relays 9.00 … 30.0 160 A, fuse type gG 10E, 20E, 30E EF45-30 1SAX221001R1101 0.362 15.0 … 45.0 10E, 20E, 30E EF45-45 1SAX221001R1102 0.362 Weight (1 pce) kg 0.042 0.019 1SBC101148F0010 A EF45-30 160 A, fuse type gG 7 2CDC231024V0013 Ordering details accessories Suitable for Description Type Order code EF19 EF19, EF45 Single mounting kit Reset push button* DB19EF KPR-101L 1SAX101910R1001 1SFA616162R1014 *Note: for more information see cataloge 1SFC151004C0201 1SFC151402F0001 DB19EF KPR-101L Main dimensions mm, inches 14 0.55" 14 0.55" 2 0.08" 38.8 1.53" 59.5 3.4 0.13" 2.34" 2.3 0.09" 104.7 4.12" 11.78 0.46" 1.2 0.05" 0.62" EF19 5.65 0.22" 37.5 1.48" 55.4 2.18" 29.3 2.33" 10.3 0.41" 8.5 0.33" 14 0.55" 45 1.77" 5.65 0.22" 56.5 2.22" 82.1 86 3.23" 3.39" 2CDC232008F0009 14 0.55" 44.4 1.75" EF45 ABB | 7/33 2CDC107032C0201 10.3 0.41" 8.2 0.32" 2CDC232007F0009 85 3.35" 15.73 EF19, EF45 electronic overload relays Technical data Main circuit – Utilization characteristics according to IEC/EN Type Standards Rated operational voltage Ue Rated frequency Trip class Number of poles Duty time Operating frequency without early tripping Rated impulse withstand voltage Uimp Rated insulation voltage Ui EF19 EF45 IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1 690 V AC 50/60 Hz – not suitable for DC applications 10E, 20E, 30E, selectable 3 100 % Up to 15 operations/h, see "Technical diagram – Intermittent periodic duty" 6 kV 690 V AC Auxiliary circuit according to IEC/EN EF19 600 V AC / DC 6A DC, 50/60 Hz 1 N.C. + 1 N.O. 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 3.00 3.00 1.10 0.75 EF45 A A A A 1.50 A 0.55 A 0.55 A 0.27 A 12 V / 3 mA 6 A, fuse type gG 6 kV 690 V Technical diagram – Intermittent periodic duty .5 80 s 70 120 60 switching frequency 140 100 ta = 80 60 ta = 3 s ta = 5 s 0 20 40 60 duty ratio 100 (%) ta =2 50 s ta = 30 0 4s ta = 8 s t a = 10 s t a = 12 s 10 0 20 =5 s 40 ta = 6 20 ta 45 50 40 Trip class 30E (Op/h) s 40 60 duty ratio Trip class 20E 80 100 (%) 35 30 25 ta = 20 15 ta = 1 5s t a = 20 s t a = 25 s 10 5 0 10 s 0 20 40 60 duty ratio 80 100 (%) Trip class 30E 2CDC107032C0201 Trip class 10E 80 2CDC232001F0214 .5 s 20 0 1s ta = 1 40 Trip class 20E (Op/h) 2CDC232003F0214 =0 switching frequency ta 160 2CDC232002F0214 Trip class 10E (Op/h) switching frequency 7 Type Rated operational voltage Ue Conventional free air thermal current Ith Rated frequency Number of poles Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 110-120 V 220-230-240 V 440 V 480-500 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 24 V 60 V 110-120-125 V 250 V Minimum switching capacity Short-circuit protective device Rated impulse withstand voltage Uimp Rated insulation voltage Ui 7/34 | ABB EF19, EF45 electronic overload relays Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Trip rating Full load amps (FLA) Short-circuit rating RMS symmetrical Short-circuit protective device EF19 EF45 UL 508, CSA 22.2 No. 14 600 V AC 125 % of FLA See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" See table "Full load amps and short-circuit protective device" Auxiliary circuit according to UL/CSA Type Contact rating N.C., 95-96 N.O., 97-98 Conventional thermal current EF19 B600, Q600 B600, Q600 5A EF45 Full load amps and short-circuit protective device Full load amps (FLA) EF19-0.32 EF19-1.0 EF19-2.7 EF19-6.3 EF19-18.9 0.32 A 1.00 A 2.70 A 6.30 A 18.90 A Type Full load amps (FLA) EF45-30 EF45-45 30 kA 45 kA Short-circuit protective device 480 V AC SCCR Fuse type 50 kA 2 A, Class J 50 kA 2 A, K5 / RK5 50 kA 4 A, K5 / RK5 50 kA 15 A, K5 / RK5 50 kA 30 A, K5 / RK5 600 V AC SCCR 5 kA 5 kA 5 kA 5 kA 5 kA Fuse type 2 A, K5 / RK5 2 A, K5 / RK5 4 A, K5 / RK5 15 A, K5 / RK5 30 A, K5 / RK5 SCCR 100 kA 100 kA 100 kA 100 kA 100 kA Fuse type 2 A, Class J 2 A, Class J 4 A, Class J 15 A, Class J 30 A, Class J Short-circuit protective device 480 V AC SCCR Fuse type 18 kA 150 A, K5 / RK5 18 kA 200 A, K5 / RK5 600 V AC SCCR 18 kA 18 kA Fuse type 150 A, K5 / RK5 200 A, K5 / RK5 SCCR 100 kA 100 kA Fuse type 150 A, Class J 200 A, Class J 7 2CDC107032C0201 Type ABB | 7/35 EF19, EF45 electronic overload relays Technical data General data Type Pollution degree Phase loss sensitive Ambient air temperature Operation Open - compensated Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 Mounting position Mounting Degree of protection Housing Main circuit terminals EF19 3 Yes EF45 -25 ... +70 °C -50 ... +85 °C Acc. to IEC/EN60947-4-1 2000 m 15g / 11 ms 1g / 3 … 150 Hz Position 1-6 Mount on the contactor and tighten the screws of the main circuit terminals IP20 IP20 Electrical connection Main circuit Type Connecting capacity Rigid Flexible with insulated ferrule Stranded acc. to UL/CSA Flexible acc. to UL/CSA 7 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x Stripping length Tightening torque Recommended screw driver Auxiliary circuit Type Connecting capacity Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA EF45 1 ... 4 mm² 0.75 ... 2.5 mm² AWG 16-10 AWG 16-10 9 mm 0.8 ... 1.5 Nm / 7 … 13 Ib.in M3.5 (Pozidriv 2) 2.5 ... 16 mm² 2.5 ... 10 mm² AWG 14-6 AWG 14-6 13 mm 2.3 ... 2.6 Nm / 20 … 22 Ib.in EF19 EF45 1 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² AWG 18-10 AWG 18-10 9 mm 0.8 ... 1.2 Nm / 7 ... 11 Ib.in M3 (Pozidriv 2) 2CDC107032C0201 Stripping length Tightening torque Recommended screw driver 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x EF19 7/36 | ABB EF65, EF96, EF146 electronic overload relays 20 to 150 A 2CDC231001F0012 Description The EF65, EF96 and EF146 are self-supplied electronic overload relays, which means no extra external supply is needed. It offers reliable protection for motors in the event of overload or phase failure. Easy to use like a thermal overload relay and compatible with standard motor applications, the electronic overload relay is convincing, above all, due to its wide setting range, high accuracy, high operational temperature range and the possibility to select a trip class (10E, 20E, 30E). Further features are the temperature compensation, trip contact (N.C.), signal contact (N.O.), automatic or manual reset selectable, trip-free mechanism, STOP and TEST function and a trip indication. The overload relays are connected directly to the contactors. Ordering details EF65-70 2CDC231002F0012 Setting range EF96-100 Trip class Type Order code A 20 ... 56 Short-circuit protective device 160 A, fuse type gG 10E, 20E, 30E EF65-56 1SAX331001R1102 Weight (1 pce) kg 0.821 25 ... 70 160 A, fuse type gG 10E, 20E, 30E EF65-70 1SAX331001R1101 0.821 36 ... 100 200 A, fuse type gG 10E, 20E, 30E EF96-100 1SAX341001R1101 0.802 54 ... 150 315 A, fuse type gG 10E, 20E, 30E EF146-150 1SAX351001R1101 0.879 Weight (1 pce) kg 0.019 Ordering details accessories Suitable for Description Type Order code EF65, EF96, EF146 Reset push button* KPR-101L 1SFA616162R1014 7 2CDC231003F0012 *Note: for more information see cataloge 1SFC151004C0201 EF146-150 Main dimensions mm, inches 55 2.17" 43.7 1.72" 34.65 1.36" 56.6 2.23" 8 0.31" 8 0.31" 53.3 2.1" 3 0.12" 3 0.12" 17.2 0.68" 25.4 1" 2.91" 101.4 3.99" 105.2 4.14" EF65-56 / EF65-70 89.05 3.51" 60.1 2.37" 13 4.06" 38.4 1.51" 11 0.43" 103.2 74.2 2.92" 5.5 0.22" 3 0.12" 74 2.91" 101.4 3.99" 105.2 4.14" 0.5" 15.5 0.61" 10 0.39" 4 0.16" 5.5 0.22" 3 0.12" 74 2.91" 101.4 3.99" 105.2 4.14" 2CDC107038C0201 16 0.63" 37 1.46" 58 2.28" 70 2.76" 2CDC232003F0012 11 0.43" 103.7 4.08" 38.4 1.51" 88.9 3.5" 85.2 3.35" 74.2 2.92" 4.69" 5" 127 139.4 5.49" 70 2.76" EF96-100 6.6 0.26" 119.25 16 0.63" 37 1.46" 58 2.28" 2CDC232002F0012 74 70 2.76" 105.2 4.14" 121.7 4.79" 3 0.12" 5.5 0.22" 2CDC232001F0012 11 0.43" 16 0.63" 37 1.46" 58 2.28" 85.2 3.35" 10 0.39" 25.4 1" 10 0.39" 103.2 4.06" 120.2 4.73" 38.4 1.51" 3.35" 105.2 4.14" 2.92" 74.2 85.2 KPR-101L 117.4 4.62" 1SFC151402F0001 17.2 0.68" EF146-150 ABB | 7/37 EF65, EF96, EF146 electronic overload relays Technical data Main circuit – Utilization characteristics according to IEC/EN Type Standards Rated operational voltage Ue Rated frequency Trip class Number of poles Duty time Operating frequency without early tripping Rated impulse withstand voltage Uimp Rated insulation voltage Ui EF65, EF96, EF146 IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1 1000 V AC 50/60 Hz – not suitable for DC applications 10E, 20E, 30E, selectable 3 100 % Up to 15 operations/h, see "Technical diagram – Intermittent periodic duty" 8 kV 1000 V Auxiliary circuit according to IEC/EN EF65, EF96, EF146 600 V AC / DC 6A DC, 50/60 Hz 1 N.C. + 1 N.O. 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 3.00 3.00 1.10 0.75 A A A A 1.50 A 0.55 A 0.55 A 0.27 A 12 V / 3 mA 6 A, fuse type gG 6 kV 690 V Technical diagram – Intermittent periodic duty .5 80 s 70 120 60 switching frequency 140 100 ta = 80 60 ta = 3 s ta = 5 s 0 20 40 60 duty ratio 100 (%) ta =2 50 s ta = 30 0 4s ta = 8 s t a = 10 s t a = 12 s 10 0 20 =5 s 40 ta = 6 20 ta 45 50 40 Trip class 30E (Op/h) s 40 60 duty ratio Trip class 20E 80 100 (%) 35 30 25 ta = 20 15 ta = 1 5s t a = 20 s t a = 25 s 10 5 0 10 s 0 20 40 60 duty ratio 80 100 (%) Trip class 30E 2CDC107038C0201 Trip class 10E 80 2CDC232001F0214 .5 s 20 0 1s ta = 1 40 Trip class 20E (Op/h) 2CDC232003F0214 =0 switching frequency ta 160 2CDC232002F0214 Trip class 10E (Op/h) switching frequency 7 Type Rated operational voltage Ue Conventional free air thermal current Ith Rated frequency Number of poles Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 110-120 V 220-230-240 V 400 V 480-500 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 24 V 60 V 110-120-125 V 250 V Minimum switching capacity Short-circuit protective device Rated impulse withstand voltage Uimp Rated insulation voltage Ui 7/38 | ABB EF65, EF96, EF146 electronic overload relays Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Trip rating Full load amps (FLA) Short-circuit rating RMS symmetrical Short-circuit protective device EF65, EF96, EF146 UL 508, CSA 22.2 No. 14, UL 600 V AC 125 % of FLA See table "Full load amps and See table "Full load amps and See table "Full load amps and 60947-4-1A short-circuit protective device" short-circuit protective device" short-circuit protective device" Auxiliary circuit according to UL/CSA Type Contact rating N.C., 95-96 N.O., 97-98 Conventional thermal current EF65, EF96, EF146 B600, Q600 B600, Q600 6A Full load amps and short-circuit protective device EF65-56 EF65-70 EF96-100 EF146-150 Full load amps (FLA) 56 A 70 A 100 A 150 A Short-circuit protective device 480 V AC SCCR Fuse type 10 kA 150 A, R5/RK5 10 kA 150 A, R5/RK5 10 kA 200 A, R5/RK5 10 kA 250 A, R5/RK5 600 V AC SCCR 10kA 10kA 10kA 10kA Fuse type 150 A, R5/RK5 150 A, R5/RK5 200 A, R5/RK5 250 A, R5/RK5 SCCR 100 kA 100 kA 100 kA 100 kA Fuse type 175 A, J 175 A, J 225 A, J 350 A, J 7 2CDC107038C0201 Type ABB | 7/39 EF65, EF96, EF146 electronic overload relays Technical data General data Type Pollution degree Phase loss sensitive Ambient air temperature Operation Open - compensated Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 Mounting position Mounting Degree of protection Housing Main circuit terminals EF65, EF96, EF146 3 Yes -25 ... +70 °C -50 ... +85 °C Acc. to IEC/EN 60947-4-1 2000 m 15g / 11 ms 5g / 3 … 150 Hz Position 1-6 Mount on the contactor and tighten the screws of the main circuit terminals IP20 IP10 Electrical connection Main circuit Type Connecting capacity EF65 EF96 EF146 4 ... 35 mm² 4 ... 35 mm² 4 ... 35 mm² 4 ... 35 mm² AWG 10-2 6 ... 70 mm² 6 ... 35 mm² 6 ... 50 mm² 6 ... 35 mm² AWG 8-2 AWG 10-2 AWG 8-2 Stripping length Tightening torque Recommended screw driver 20 mm 4 Nm / 35 lb.in M8 (Pozidriv 2) 20 mm 6 Nm / 55 lb.in M8 (Hexagon 4) 10 ... 95 mm² 10 ... 35 mm² 10 ... 70 mm² 10 ... 35 mm² AWG 6-00 AWG 6-2 AWG 6-00 AWG 6-2 20 mm 8 Nm / 70 lb.in M8 (Hexagon 4) Auxiliary circuit Type Connecting capacity EF65, EF96, EF146 Rigid 7 Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² AWG 18-10 AWG 18-10 9 mm 0.8 ... 1.2 Nm / 7 ... 11 Ib.in M3.5 (Pozidriv 2) 2CDC107038C0201 Stripping length Tightening torque Recommended screw driver 1x 2x 1x 2x 1x 2x 1x 2x 7/40 | ABB EF205, EF370 electronic overload relays 63 to 380 A 2CDC231004F0012 Description The EF205 and EF370 are self-supplied electronic overload relays, which means no extra external supply is needed. It offers reliable protection for motors in the event of overload or phase failure. Easy to use like a thermal overload relay and compatible with standard motor applications, the electronic overload relay is convincing, above all, due to its wide setting range, high accuracy, high operational temperature range and the possibility to select a trip class (10E, 20E, 30E). Further features are the temperature compensation, trip contact (N.C.), signal contact (N.O.), automatic or manual reset selectable, trip-free mechanism, STOP and TEST function and a trip indication. The overload relays are connected directly to the contactors. Ordering details EF205-210 Setting range Trip class Type Order code A 63 ... 210 Short-circuit protective device 1250 A, fuse type gG 10E, 20E, 30E EF205-210 1SAX531001R1101 Weight (1 pce) kg 1.210 115 ... 380 1600 A, fuse type gG 10E, 20E, 30E EF370-380 1SAX611001R1101 1.430 Weight (1 pce) kg 0.027 2CDC231005F0012 Ordering details accessories Suitable for Description Type Order code EF205, EF370 Reset push button* KPR-101L 1SFA616162R1014 7 *Note: for more information see cataloge 1SFC151004C0201 1SFC151402F0001 Main dimensions mm, inches 122.8 105 4.13" 7.4 0.29" 17.9 116.5 10 0.39" EF370-380 0.7" 30 1.18" 4.83" 4.59" 5 0.2" 151 5.9" 122 4.8" 5 0.2" 17.5 0.69" Ø 0.33" 35 1.38" 35 1.38" 35 1.38" 2CDC232004F0012 Ø 8.5 10 0.39" 18.5 0.73" 11 0.43" KPR-101L 5 0.2" 121.7 4.79" EF205-210 122.8 10 0.39" 5 0.2" 43.8 1.72" 20 0.79" 43.8 1.72" 35 1.38" 5 0.2" 121.7 4.79" 2CDC107040C0201 Ø 0.43" 2CDC232005F0012 Ø 11 14 0.55" 22.8 0.9" 122 5 0.2" 30 1.18" 6.4" 0.7" 4.83" 4.59" 163.6 17.9 93.8 3.69" 0.29" 11 0.43" 7.4 116.5 4.13" 0.4' 105 EF370-380 ABB | 7/41 EF205, EF370 electronic overload relays Technical data Main circuit – Utilization characteristics according to IEC/EN Type Standards Rated operational voltage Ue Rated frequency Trip class Number of poles Duty time Operating frequency without early tripping Rated impulse withstand voltage Uimp Rated insulation voltage Ui EF205, EF370 IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1 1000 V AC 50/60 Hz – not suitable for DC applications 10E, 20E, 30E, selectable 3 100 % Up to 15 operations/h, see "Technical diagram – Intermittent periodic duty" 8 kV 1000 V Auxiliary circuit according to IEC/EN EF205, EF370 600 V AC / DC 6A DC, 50/60 Hz 1 N.C. + 1 N.O. 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 3.00 3.00 1.10 0.75 A A A A 1.50 A 0.55 A 0.55 A 0.27 A 12 V / 3 mA 6 A, fuse type gG 6 kV 690 V Technical diagram – Intermittent periodic duty .5 80 s 70 120 60 switching frequency 140 100 ta = 80 60 ta = 3 s ta = 5 s 0 20 40 60 duty ratio 100 (%) ta =2 50 s ta = 30 0 4s ta = 8 s t a = 10 s t a = 12 s 10 0 20 =5 s 40 ta = 6 20 ta 45 50 40 Trip class 30E (Op/h) s 40 60 duty ratio Trip class 20E 80 100 (%) 35 30 25 ta = 20 15 ta = 1 5s t a = 20 s t a = 25 s 10 5 0 10 s 0 20 40 60 duty ratio 80 100 (%) Trip class 30E 2CDC107040C0201 Trip class 10E 80 2CDC232001F0214 .5 s 20 0 1s ta = 1 40 Trip class 20E (Op/h) 2CDC232003F0214 =0 switching frequency ta 160 2CDC232002F0214 Trip class 10E (Op/h) switching frequency 7 Type Rated operational voltage Ue Conventional free air thermal current Ith Rated frequency Number of poles Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 110-120 V 220-230-240 V 400 V 480-500 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 24 V 60 V 110-120-125 V 250 V Minimum switching capacity Short-circuit protective device Rated impulse withstand voltage Uimp Rated insulation voltage Ui 7/42 | ABB EF205, EF370 electronic overload relays Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Trip rating Full load amps (FLA) Short-circuit rating RMS symmetrical Short-circuit protective device EF205, EF370 UL 508, CSA 22.2 No. 14, UL 600 V AC 125 % of FLA See table "Full load amps and See table "Full load amps and See table "Full load amps and 60947-4-1A short-circuit protective device" short-circuit protective device" short-circuit protective device" Auxiliary circuit according to UL/CSA Type Contact rating N.C., 95-96 N.O., 97-98 Conventional thermal current EF205, EF370 B600, Q600 B600, Q600 6A Full load amps and short-circuit protective device EF205-210 EF370-380 Full load amps (FLA) 210 A 380 A Short-circuit protective device 480 V AC SCCR Fuse type 10 kA 400 A, R5/RK5 18 kA 800 A, L/T 600 V AC SCCR 10kA 18kA Fuse type 400 A, R5/RK5 800 A, L/T SCCR 100 kA - Fuse type 400 A, J - 7 2CDC107040C0201 Type ABB | 7/43 EF205, EF370 electronic overload relays Technical data General data Type Pollution degree Phase loss sensitive Ambient air temperature Operation Open - compensated Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 Mounting position Mounting Degree of protection EF205 3 Yes EF370 -25 ... +70 °C -50 ... +85 °C Acc. to IEC/EN 60947-4-1 2000 m 25g / 11 ms 5g / 3 … 150 Hz Position 1-6 Mount on the contactor and tighten the screws of the main circuit terminals IP20 IP20 Housing Main circuit terminals Electrical connection Main circuit Type Connecting capacity Rigid 7 Flexible Lugs Bars Stranded acc. to UL/CSA Flexible acc. to UL/CSA 1x 2x 1x 2x L≤ Ø> 1x 2x 1x 2x Stripping length Tightening torque Recommended screw driver Auxiliary circuit Type Connecting capacity EF370 16 ... 185 mm² 16 ... 120 mm² 16 ... 185 mm² 16 ... 120 mm² 24 mm 8 mm AWG 6-0000 AWG 6-0000 AWG 6-0000 AWG 6-0000 18 Nm / 160 lb.in M8 50 ... 240 mm² 50 ... 150 mm² 50 ... 240 mm² 50 ... 150 mm² 32 mm 10 mm AWG 1-500 kcmil AWG 1-500 kcmil AWG 1-500 kcmil AWG 1-500 kcmil 28 Nm / 247 lb.in M10 EF205, EF370 Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² AWG 18-10 AWG 18-10 9 mm 0.8 ... 1.2 Nm / 7 ... 11 Ib.in M3.5 (Pozidriv 2) 2CDC107040C0201 Stripping length Tightening torque Recommended screw driver EF205 7/44 | ABB EF460, EF750 electronic overload relays 150 to 800 A 2CDC231013F0013 Description The EF460 and EF750 are self-supplied electronic overload relays, which means no extra external supply is needed. It offers reliable protection for motors in the event of overload or phase failure. Easy to use like a thermal overload relay and compatible with standard motor applications, the electronic overload relay is convincing, above all, due to its wide setting range, high accuracy, high operational temperature range and the possibility to select a trip class (10E, 20E, 30E). Further features are the temperature compensation, trip contact (N.C.), signal contact (N.O.), automatic or manual reset selectable, trip-free mechanism, STOP and TEST function and a trip indication. Busbar kits are available as accessory for contactor mounting. Ordering details 2CDC231014F0013 EF460-500 EF750-800 Setting range A Short-circuit protective device Trip class Type Order code Weight (1 pce) kg EF460 electronic overload relay 150 ... 500 690 V: 630 A, Type gG 1000 V: 1600 A, Type gG 10E, 20E, 30E EF460-500 1SAX721001R1101 1.170 EF750 electronic overload relay 250 ... 800 690 V: 800 A, Type gG 1000 V: 1600 A, Type gG 10E, 20E, 30E EF750-800 1SAX821001R1101 3.905 Ordering details accessories 1SFC151402F0001 Suitable for Description EF460, EF750 Reset push button* Type Order code KPR-101L 1SFA616162R1014 Weight (1 pce) kg 0.027 7 *Note: for more information see cataloge 1SFC151004C0201 KPR-101L 184.4 7.26" 187.9 7.4" 48.04 1.89" 103 4.06" 110.5 4.35" 186.8 7.35" 22 0.87" 149.9 5.9" 76 2.99" 74 2.91" 153.4 6.04" 38.8 1.53" mm, inches 28.4 1.12" 152.3 6" Main dimensions 41.5 1.63" 83 3.27" 21 0.83" 58 2.28" 32 1.26" 53.3 2.1" 40.5 1.59" 83 3.27" 82 3.23" 28 1.1" 2CDC232009F0013 19.5 0.77" 25.5 1" 2CDC232008F0013 247 9.72" " 7 0.28" 13 0.51" .2" .28 Ø0 Ø0 EF460-500 .2 Ø7 192 7.56" Ø5 EF750-800 ABB | 7/45 2CDC107045C0201 60 2.36" 80 3.15" 100 3.94" 76 2.99" 5.6 0.22" 55 2.17" 30.9 1.22" 58 2.28" EF460, EF750 electronic overload relays Technical data Main circuit – Utilization characteristics according to IEC/EN Type Standards Rated operational voltage Ue Rated frequency Trip class Number of poles Duty time Operating frequency without early tripping Rated impulse withstand voltage Uimp Rated insulation voltage Ui EF460 EF750 IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1 1000 V AC 50/60 Hz – not suitable for DC applications 10E, 20E, 30E, selectable 3 100 % Up to 15 operations/h, see "Technical diagram – Intermittent periodic duty" 8 kV 1000 V AC Auxiliary circuit according to IEC/EN EF460 600 V AC / DC 6A DC, 50/60 Hz Number of poles Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 110-120 V 220-230-240 V 400 V 480-500 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 24 V 60 V 110-120-125 V 250 V Minimum switching capacity Short-circuit protective device Rated impulse withstand voltage Uimp Rated insulation voltage Ui 1 N.C. + 1 N.O. 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 3.00 3.00 1.10 0.75 EF750 A A A A 1.50 A 0.55 A 0.55 A 0.27 A 12 V / 3 mA 6 A, fuse type gG 6 kV 690 V Technical diagram – Intermittent periodic duty .5 80 s 70 120 60 switching frequency 140 100 ta = 80 60 ta = 3 s ta = 5 s 0 20 40 60 duty ratio 100 (%) ta =2 50 ta = 30 0 4s ta = 8 s t a = 10 s t a = 12 s 10 0 20 =5 s 40 ta = 6 20 ta 45 s 50 40 Trip class 30E (Op/h) s 40 60 duty ratio Trip class 20E 80 100 (%) 35 30 25 ta = 20 15 ta = 1 5s t a = 20 s t a = 25 s 10 5 0 10 s 0 20 40 60 duty ratio 80 100 (%) Trip class 30E 2CDC107045C0201 Trip class 10E 80 2CDC232001F0214 .5 s 20 0 1s ta = 1 40 Trip class 20E (Op/h) 2CDC232003F0214 =0 switching frequency ta 160 2CDC232002F0214 Trip class 10E (Op/h) switching frequency 7 Type Rated operational voltage Ue Conventional free air thermal current Ith Rated frequency 7/46 | ABB EF460, EF750 electronic overload relays Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Trip rating EF460 UL60947-1, UL60947-4-1 600 V AC 125 % of FLA EF750 EF460 B600, Q300 B600, Q300 5A EF750 EF460 3 Yes EF750 Auxiliary circuit according to UL/CSA Type Contact rating N.C., 95-96 N.O., 97-98 Conventional thermal current General data Type Pollution degree Phase loss sensitive Ambient air temperature Operation Open - compensated Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 Degree of protection Housing Main circuit terminals -25 ... +70 °C -25 ... +70 °C Acc. to IEC/EN60947-4-1 2000 m 25g / 11 ms 3g / 3 … 150 Hz IP20 IP00 7 Electrical connection EF460 Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Stripping length Tightening torque Recommended screw driver 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x EF750 1 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² AWG 18-10 AWG 18-10 9 mm 0.8 ... 1.2 Nm / 7 ... 11 Ib.in M3.5 (Pozidriv 2) 2CDC107045C0201 Auxiliary circuit Type Connecting capacity ABB | 7/47 E1250DU electronic overload relays 375 to 1250 A 1SFC101025F0201 Description The E1250DU are self-supplied electronic overload relays, which means no extra external supply is needed. It offers reliable protection for motors in the event of overload or phase failure. Easy to use like a thermal overload relay and compatible with standard motor applications, the electronic overload relay is convincing, above all, due to its wide setting range, high accuracy, high operational temperature range and the possibility to select a trip class (10E, 20E, 30E). Further features are the temperature compensation, trip contact (N.C.), signal contact (N.O.), automatic or manual reset selectable, trip-free mechanism, STOP and TEST function and a trip indication. Busbar kits are available as accessory for contactor mounting. Ordering details Setting range E1250DU-1250 A Short-circuit protective device E1250DU electronic overload relay 375 ... 1250 - Trip class Type Order code Weight (1 pce) kg 10E, 20E, 30E E1250DU-1250 1SFA739001R1000 12.181 2CDC107031C0201 7 7/48 | ABB E1250DU electronic overload relays Technical data Main circuit – Utilization characteristics according to IEC/EN Type Standards Rated operational voltage Ue Rated frequency Trip class Number of poles Duty time Operating frequency without early tripping Rated impulse withstand voltage Uimp Rated insulation voltage Ui E1250DU IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1 1000 V AC 50/60 Hz – not suitable for DC applications 10E, 20E, 30E, selectable 3 100 % Up to 15 operations/h, see "Technical diagram – Intermittent periodic duty" 8 kV 1000 V AC Auxiliary circuit according to IEC/EN Type Rated operational voltage Ue Conventional free air thermal current Ith Rated frequency E1250DU 600 V AC / DC 6A DC, 50/60 Hz Number of poles Ie / Rated operational current AC-15 acc. to IEC/EN 60947-5-1 for utilization category 110-120 V 220-230-240 V 440 V 480-500 V Ie / Rated operational current DC-13 acc. to IEC/EN 60947-5-1 for utilization category 24 V 60 V 110-120-125 V 250 V Minimum switching capacity Short-circuit protective device Rated impulse withstand voltage Uimp Rated insulation voltage Ui 1 N.C. + 1 N.O. 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 3.00 3.00 1.10 0.72 A A A A 7 1.50 A 0.55 A 0.55 A 0.27 A 12 V / 3 mA 6 A, fuse type gG 8 kV 690 V Technical diagram – Intermittent periodic duty 120 60 switching frequency 70 100 ta = 60 ta = 1 .5 s 40 ta = 3 s ta = 5 s 20 0 1s 0 20 40 60 duty ratio Trip class 10E 80 100 (%) ta =2 50 ta = 30 0 4s ta = 8 s t a = 10 s t a = 12 s 10 0 20 =5 s 40 ta = 6 20 ta 45 s 50 40 Trip class 30E (Op/h) s 40 60 duty ratio Trip class 20E 80 100 (%) 35 30 25 ta = 20 15 ta = 1 5s t a = 20 s t a = 25 s 10 5 0 10 s 0 20 40 60 duty ratio 80 100 (%) Trip class 30E 2CDC107031C0201 80 s 140 80 Trip class 20E (Op/h) 2CDC232003F0214 .5 2CDC232001F0214 switching frequency =0 switching frequency ta 160 2CDC232002F0214 Trip class 10E (Op/h) ABB | 7/49 E1250DU electronic overload relays Technical data Main circuit – Utilization characteristics according to UL/CSA Type Standards Maximum operational voltage Trip rating E1250DU UL 508, CSA 22.2 No. 14 600 V AC 125 % of FLA Auxiliary circuit according to UL/CSA Type Contact rating N.C., 95-96 N.O., 97-98 Conventional thermal current E1250DU B600, Q300 B600, Q300 5A General data E1250DU 3 Yes -25 ... +70 °C -50 ... +85 °C Acc. to IEC/EN60947-4-1 2000 m 15g / 11 ms 5g / 3 … 150 Hz IP20 IP20 Electrical connection Auxiliary circuit Type Connecting capacity E1250DU Rigid Flexible with ferrule Flexible with insulated ferrule Flexible Stranded acc. to UL/CSA Flexible acc. to UL/CSA Stripping length Tightening torque Recommended screw driver 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 or 2 x 1 ... 4 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² 0.75 ... 2.5 mm² AWG 16-10 AWG 16-10 9 mm 0.8 ... 1.2 Nm / 7 Ib.in M3.5 (Pozidriv 2) 2CDC107031C0201 7 Type Pollution degree Phase loss sensitive Ambient air temperature Operation Open - compensated Storage Ambient air temperature compensation Maximum operating altitude permissible Resistance to shock acc. to IEC 60068-2-27 Resistance to vibrations acc. to IEC 60068-2-6 Degree of protection Housing Main circuit terminals 7/50 | ABB Thermal and electronic overload relays General accessories 2CDC231028F0013 Description WRB-400 The wire reset is a general accessory for thermal and electronic overloads relays. In installations which are difficult to access, like a motor control centre or compact cubical, the accessory allows the user to remotely reset the overload relays. The wire reset consists of two parts, the bowden wire with actuator and the holder. The actuator should be mounted into a door of a panel. The holder will be mounted on the overload relay. The actuator and holder are connected via the bowden wire. Ordering details Length Type Order code Weight Pkg (1 pce) kg WRH-F 1SAZ701903R1001 0.006 WRB-400 WRB-600 WRB-1000 1SAZ701903R1011 1SAZ701903R1012 1SAZ701903R1013 0.030 0.040 0.060 WRBG 1SAZ701903R1030 0.037 mm Holder TF42, TF65, TF96, Holder for tool less direct mounting EF19, EF45, EF65, EF96, EF146, EF205, EF370, EF460, EF750 Bowden wire with actuator WRH-F Bowden wire with actuator, hole diameter: 7.3 mm, maximum panel thickness: 12 mm IP54 gasket WRB-400 WRB-600 WRB-1000 IP54 Panel seal gasket 400 600 1000 7 Overload relays with accessory wire reset (WRH, WRB) EF19 ... EF750 WRB-400/600/1000 TF42 ... TF96 WRH-F 2CDC131059C0201 WRH-F Description 2CDC232015F0013 2CDC231027F0013 Suitable for ABB | 7/51 Summary_8 8 8/0 | ABB DRAS enclosed starter DRAS enclosed starter Ordering details Control supply wiring versions Wiring diagram Main dimensions 8/2 8/3 8/3 8/3 Voltage code table 8/4 Summary_8 8 ABB | 8/1 DRAS09 … DRAS16 enclosed direct-on-line starters 4 to 7.5 kW, protected by thermal overload relays AC or DC operated Description Enclosed direct-on-line (DOL) starters are used for controlling 3-phase asynchronous motors up to 690 V AC. 1SBC133003V0014 Each starter is delivered assembled and wired. It contains: –– IP65 compact plastic enclosure with double insulation, equipped with: -- 1 green flush "I" ON button and 1 red protruding "O" OFF/RESET button -- 2 quarter-turn, quick fastening screws and a base with 6 cable inlets and outlets via knockouts. –– 1 AS or ASL 3-pole contactor with holding contact –– 1 PE and 1 neutral terminal. DRAS + T16 to be ordered separately 3 versions of control supply wiring are available: phase-to-phase, separate supply or phase-to-neutral. T16 thermal overload relay has to be ordered separately and choses according to motor's nominal current (see table below). DRAS, DRASL enclosed DOL starters IEC - AC-3 Rated operational power 220 V 400 V 500 V 230 V 240 V kW kW kW Rated control circuit Control supply voltage wiring Uc DC operated with ASL 3-pole contactors 2.2 4 4 9 24 48 3 5.5 5.5 12 24 48 4 7.5 7.5 15.5 24 48 Pkg (1 pce) kg Separate supply Phase-to-neutral Phase-to-neutral Phase-to-phase Phase-to-phase Separate supply Phase-to-neutral Phase-to-neutral Phase-to-phase Phase-to-phase Separate supply Phase-to-neutral Phase-to-neutral Phase-to-phase Phase-to-phase DRAS09-20S DRAS09-26N DRAS09-27N DRAS09-28P DRAS09-29P DRAS12-20S DRAS12-26N DRAS12-27N DRAS12-28P DRAS12-29P DRAS16-20S DRAS16-26N DRAS16-27N DRAS16-28P DRAS16-29P 1SBK104235R2000 1SBK104135R2600 1SBK104135R2700 1SBK104035R2800 1SBK104035R2900 1SBK114235R2000 1SBK114135R2600 1SBK114135R2700 1SBK114035R2800 1SBK114035R2900 1SBK124235R2000 1SBK124135R2600 1SBK124135R2700 1SBK124035R2800 1SBK124035R2900 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 0.650 Separate supply DRASL09-81S DRASL09-83S DRASL12-81S DRASL12-83S DRASL16-81S DRASL16-83S 1SBK104335R8100 1SBK104335R8300 1SBK114335R8100 1SBK114335R8300 1SBK124335R8100 1SBK124335R8300 0.700 0.700 0.700 0.700 0.700 0.700 Weight (1 pce) kg 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.100 0.104 0.104 0.104 Separate supply Separate supply Setting range 1SBC133001V0014 A 0.10…0.13 0.13…0.17 0.17…0.23 0.23…0.31 0.31…0.41 0.41…0.55 0.55…0.74 0.74…1.00 1.00…1.30 1.30…1.70 1.70…2.30 2.30…3.10 3.10…4.20 4.20…5.70 5.70…7.60 7.60…10.0 10.0…13.0 13.0…16.0 Short-circuit protective device Trip class Type Order code 0.5 A, Fuse type T 1.0 A, Fuse type T 10 T16-0.13 T16-0.17 T16-0.23 T16-0.31 T16-0.41 T16-0.55 T16-0.74 T16-1.0 T16-1.3 T16-1.7 T16-2.3 T16-3.1 T16-4.2 T16-5.7 T16-7.6 T16-10 T16-13 T16-16 1SAZ711201R1005 1SAZ711201R1008 1SAZ711201R1009 1SAZ711201R1013 1SAZ711201R1014 1SAZ711201R1017 1SAZ711201R1021 1SAZ711201R1023 1SAZ711201R1025 1SAZ711201R1028 1SAZ711201R1031 1SAZ711201R1033 1SAZ711201R1035 1SAZ711201R1038 1SAZ711201R1040 1SAZ711201R1043 1SAZ711201R1045 1SAZ711201R1047 - FR16AS-12VARS 1SBN101035R1000 2.0 A, Fuse type gG 4.0 A, Fuse type gG 6.0 A, Fuse type gG 10.0 A, Fuse type gG 20.0 A, Fuse type gG 35.0 A, Fuse type gG 40.0 A, Fuse type gG Empty enclosure with push-button - - To be completed with AS or ASL contactor, T16 thermal overload relay and MCB-10B (1SFA611610R2001) contact block. 0.394 1SBC133001S0201 2CDC231009V0013 8/2 | ABB Weight T16 thermal overload relays to be ordered separately T16 Empty enclosure with push-button Order code max. Other control current voltages see θ ≤ 40 °C voltage code table Ue=400 V A V 50/60 Hz V DC AC operated with AS 3-pole contactors 2.2 4 4 9 24 230 240 400 415 3 5.5 5.5 12 24 230 240 400 415 4 7.5 7.5 15.5 24 230 240 400 415 - 8 Type DRAS09 … DRAS16 and DRASL09 … DRASL16 enclosed direct-on-line starters L1 L2 L3 N V Control supply wiring versions L1 L2 L3 N V 1 3 5 L1 L2 L3 Uc = N U DRAS..S, DRASL..S V Uc I Separate supply A1 1 3 5 U L1 L2 L3 DRAS Uc = O 1 3 5 L1 L2 L3 Uc I O I DRAS..P Phase-to-neutral Phase-to-phase Us A1 A1 Uc = Us 2 4 6 T1 T2 T3 A1 Uc = V Uc = A2 U A2 A1 Uc = V 2 4 6 T1 T2 T3 R Us A2 DRAS..N A2 A2 DRAS R O R DRAS Uc A1 DA.Cod1 L1 L2 L3 U A1 A2 Uc = V 2 4 6 T1 T2 T3 A2 + KM1: 5/L3 8 Us M 96 A1+ -4 A1 1-phase KM1 A2- KM1: 3/L2 A2 DRAS..P - AC local control DRAS09 ... DRAS16 + T16 DC local control DRASL09 ... DRASL16..S + T16 mm, inches 131.5 5.18" 92 3.62" 126.5 4.98" 7.5 0.30" Main dimensions KM1 I 14 96 Power circuit Us N 13 -3 KM1 DRAS..S DRAS..N FR1 STOP 14 -4 6/T3 2/T1 4/T2 FR1 6/T3 4/T2 2/T1 98 TEST STOP 96 FR1 FR1 KM1 I 97 95 A M M 13 6/T3 4/T2 2/T1 6/T3 4/T2 2/T1 STOP -3 RESET RESET 14 14 A2 RESET A 95 13 KM1 A 95 5/L3 DRAS..P DRAS..N DRAS..S 13 3/L2 1/L1 5/L3 3/L2 A1 1/L1 Wiring diagram 5.5 0.22" M5 1SBC133002S0201 ø 20.5mm - ø 0.81" for ISO M20 ø 25.5mm - ø 1.00" for ISO M25 7.5 0.30" M5 5.5 0.22" DRAS09, DRAS12, DRAS16 DRASL09, DRASL12, DRASL16 160 6.30" 171.5 6.75" Cable inlets Cable outlet Enclosure top Enclosure back Enclosure bottom 2 x ø 20.5/25.5 mm 2 x ø 20.5 mm 2 x ø 20.5/25.5 mm 2 x ø 0.81/1.00" 2 x ø 0.81" 2 x ø 0.81/1.00" ABB | 8/3 Voltage code table DRAS09 ... DRAS16 and DRASL09 ... DRASL16 enclosed DOL starters Type DR AS16 - 26N AS ASL Contactor type AC operated DC operated AS contactors AC coil code 50 Hz 60 Hz 20 S 21 S 22 S 24 V 42 V 48 V 24 V 42 V 48 V 16 23 24 25 26 27 N N N N N N 110 V 115 V 220 V 230 V 240 V 13 17 28 29 P P P P 380 V 400 V 415 V ASL contactors DC coil code 81 S 83 S 24 V 48 V Control supply wiring S Separate supply 120 V 110 V 115 V 220 V 230 V 240 V N Phase-to-neutral 380 V 277 V 400 V 415 V P Phase-to-phase 1SBC133003S0201 8 8/4 | ABB Notes N18 8 ABB | 8/5 Summary_9 9 9/0 | ABB R contactors Presentation 9/2 Overview R contactors for the AC circuits switching 9/4 R contactors for the DC circuits switching 9/6 Questionnaire 9/8 Summary_9 9 ABB | 9/1 R contactors 85 to 5000 A R contactors with variable number of poles and their variants (contactors with N.C. + N.O. poles, couplers...) are used for controlling power circuits up to 1000 V AC or 1500 V DC. They are designed with common standard components. With the combination of these elements and the adaptation possibilities, special versions can be provided. Designed for long-lasting operation and demanding applications, the ABB R contactors are used for many applications all over the world. Flexibility of design –– Variable number of poles –– Adjustable number of auxiliary contacts –– Optional combination of N.O. and N.C. poles –– Mechanical or magnetic latching available. Easy maintenance –– Direct access to all the components of the contactor –– Complete and didactic instruction manual –– Spare parts available –– Dedicated service for bar contactors. Exceptional durability – – Mechanical durability up to 10 millions operating cycles – – Mechanical switching frequency up to 1200 cycles per hour – – Electrical durability up to 350 000 operating cycles. Ideal for heavy duty applications – – High making and breaking capacity –– Fully compatible with the requirements of utilization categories AC-3, DC-3 and DC-5 (control of AC / DC motors for mining, iron and steel industries...). Custom-made solutions – – More than 60 years' experience in dealing with customers projects – – Development of solutions from specifications – – Pre-sales support to identify and define customer requirements – – Specialists available to help you, select your product or optimize your configuration. 1SBC104003S0201 9 9/2 | ABB R contactors For heavy duty applications R contactors meet the particular requirements of each AC / DC control application up to 5000 A, where the demands are increasing: –– Power distribution –– Photovoltaic, hydroelectric power stations –– Batteries –– Mining –– Railway networks and rolling stock –– Induction furnaces –– Pump stations –– Travelling cranes. Control your AC applications up to 5000 A AC-1 Rated operational current up to 5000 A AC-3 Rated power up to 1500 kW (1520 A - 440 V) Control your DC applications up to 5000 A DC-1 Rated operational current up to 5000 A DC-3 / DC-5 Rated operational current up to 2000 A 1500 V with poles in series 9 1SBC104003S0201 Special applications AC / DC coupling: LOR.. contactors Slip ring motor control: FOR.. contactors AC / DC switching (N.C. / N.O. main poles): NOR & JOR.. contactors Latching contactors for energy saving and safety requirements: AMA or AME contactors Field discharge: AM(F)-CC-JORE.. contactors ABB | 9/3 R contactors for the AC circuits switching 1000 V AC Current Ie up to 4500 A Voltage Ue up to Contactor type AC control circuit IORR63..-MT IORR125..-MT IORR200..-MT IORR400..-MT IORR500..-MT IORR800..-MT DC control circuit IORE63..-MT IORE125..-MT IORE200..-MT IORE400..-MT IORE500..-MT IORE800..-MT 170 A 260 A 400 A 550 A 800 A Categories AC-1 Ue at 40 °C AC-3 Ie 85 A 690 V AC Ie 85 A 160 A 260 A 400 A 550 A 800 A 1000 V AC max. Ie 56 A 105 A 180 A 280 A 380 A 580 A 150 kW 240 kW 400 kW 540 kW 780 kW 690 V AC AC-3 Power 80 kW 9 500 V AC Current Ie up to 5000 A Voltage Ue up to AC control circuit – IORR800 DC control circuit – IORE800 Categories AC-1 Ue at 40 °C AC-3 380-415-440 V AC 500 V AC max. AC-3 400 V AC Ie From 85 A to 550 A, select above IOR..-MT 900 A Ie – 800 A Ie – 800 A Power – 450 kW Recap: All contactors fulfill the IEC 60947-4-1 / EN 60947-4-1 standards. Utilization category AC-1: max. breaking current = 1.5 x Ie, max. making current = 1.5 x Ie. Utilization category AC-3: max. breaking current = 8 x Ie, max. making current = 10 x Ie. 9/4 | ABB Contactors with NC poles, magnetic or mechanical latching devices on request. 1SBC104002S0201 Contactor type IORR1400..-MT IORR1700..-MT IORR2100..-MT IORR2500..-MT IORR3200..-MT IORR3800..-MT IORR4500..-MT IORR5100..-MT IORE1400..-MT IORE1700..-MT IORE2100..-MT IORE2500..-MT IORE3200..-MT IORE3800..-MT IORE4500..-MT IORE5100..-MT 1250 A 1650 A 1850 A 2200 A 3000 A 3500 A 4000 A 4500 A 970 A 1170 A 1270 A – – – – – 610 A 680 A 810 A – – – – – 1000 kW 1200 kW 1300 kW – – – – – 9 IORR1400 IORR1700 IORR2100 IORR2500 IORR3200 IORR3800 IORR4500 IORR5100 IORE1000 IORE1400 IORE1700 IORE2100 IORE2500 IORE3200 IORE3800 IORE4500 IORE5100 1000 A 1350 A 1650 A 2000 A 2400 A 3200 A 3800 A 4500 A 5000 A 800 A 1060 A 1260 A 1520 A – – – – – 800 A 1080 A 1220 A 1340 A – – – – – 450 kW 630 kW 750 kW 900 kW – – – – – 1SBC104002S0201 IORR1000 ABB | 9/5 R contactors for the DC circuits switching 1500 V DC Current Ie up to 5000 A Voltage Ue up to Contactor type AC control circuit IORR63 ..-CC IORR125 ..-CC IORR200 ..-CC IORR400 ..-CC IORR500 ..-CC DC control circuit IORE63 ..-CC IORE125 ..-CC IORE200 ..-CC IORE400 ..-CC IORE500 ..-CC Number of poles Categories in series* 1 pole 2 poles 3 poles Ue max. DC-1 500 V DC Ie 85 A 170 A 275 A 400 A 550 A DC-3 / DC-5 500 V DC Ie 68 A 140 A 205 A 350 A 500 A DC-1 1000 V DC Ie 85 A 170 A 275 A 400 A 550 A DC-3 / DC-5 1000 V DC Ie 68 A 140 A 205 A 350 A 500 A DC-1 1500 V DC Ie 85 A** 170 A** 275 A** 400 A** 550 A** DC-3 / DC-5 1500 V DC Ie 68 A** 140 A** 205 A** 350 A** 500 A** *Number of poles to be fitted in series according to the operational voltage and the utilization categories. **Version with increased insulation for 1000 V DC < Ue ≤ 1500 V DC, please consult us. 9 Contactors UL / CSA approved Voltage Ue up to Current Ie up to Contactor type 600 V DC 2000 A AC control circuit IORR800-10-CC IORR1000-10-CC IORR1400-10-CC IORR1700-10-CC IORR2100-10-CC DC control circuit IORE800-10-CC IORE1000-10-CC IORE1400-10-CC IORE1700-10-CC IORE2100-10-CC 1000 A 1300 A 1700 A 2000 A 1 pole General use 600 V DC Ie 800 A Recap: All contactors fulfill the IEC 60947-4-1 / EN 60947-4-1 standards. Utilization category DC-1: max. breaking current = 1.5 x Ie, max. making current = 1.5 x Ie. Utilization categories DC-3 / DC-5: max. breaking current = 4 x Ie, max. making current = 4 x Ie. 9/6 | ABB Contactors with NC poles, magnetic or mechanical latching devices on request. 1SBC104001S0201 U max. IORR800..-CC IORR1000..-CC IORR1400..-CC IORR1700..-CC IORR2100..-CC IORR2500..-CC IORR3200..-CC IORR3800..-CC IORR4500..-CC IORR5100..-CC IORE800..-CC IORE1000..-CC IORE1400..-CC IORE1700..-CC IORE2100..-CC IORE2500..-CC IORE3200..-CC IORE3800..-CC IORE4500..-CC IORE5100..-CC Ue max. 750 V DC 800 A 1000 A 1250 A 1600 A 2000 A 2300 A 3200 A 3800 A 4500 A 5000 A 600 V DC 720 A 1000 A 1250 A 1600 A 2000 A On request On request On request On request On request 1500 V DC 800 A 1000 A 1250 A 1600 A 2000 A 2300 A 3200 A 3800 A 4500 A 5000 A 1000 V DC 720 A 1000 A 1250 A 1600 A 2000 A On request On request On request On request On request 1500 V DC 800 A 1000 A 1250 A 1600 A 2000 A 2300 A 3200 A 3800 A 4500 A 5000 A 1500 V DC 720 A 1000 A 1250 A 1600 A 2000 A On request On request On request On request On request 9 Product overview CA15.. auxiliary contacts 1 N.O. + 1 N.C. fitted as standard (extra auxiliary contacts on request) 2 N.O. main poles with arc chutes Auxiliary frame for auxiliary contacts Main frame for contactor fixing Connecting terminals for coil supply Lower terminal plate for power circuit (utilization) Electro-magnet (RR type), laminated magnetic circuit, AC coil, direct supply 1SBC104001S0201 Upper terminal plate for power circuit (network) ABB | 9/7 Questionnaire Specification for R contactors Customer .................................................................................................................. Contact person ....................................................... Date ............................... Tel. ........................................................... e-mail ................................................... ABB .............................................................................................................................. Contact person ..................................................................................................... Tel. ................................................................................................................................ Quantity .................... Requested delivery date ...................................... Project / Application ............................................................................................................................................................................................................................................ Power circuit Auxiliary contacts AC switching Application type AC-1 (resistive load) AC-3 (direct starting, switching off running motors) No load breaking Other............................................................................................... Number of poles: N.O. ...................... N.C. ..................... Rated operational current Ie ................... A Max. making current ............................. A Max. breaking current .......................... A Rated operational voltage Ue ................ V ................ Hz Number of N.O. auxiliary contacts ............. Number of N.C. auxiliary contacts .............. or Operating conditions Switching frequency .............................................. cycles/h Mech. durability required (millions of operating cycles) ............... Remarks ........................................................................................... Control circuit (coil) AC Voltage .. .................... V ................ Hz .. .................... V DC DC Voltage Options Magnetical latching Mechanical latching Accessories .............................................................................................................................................................................................................................................. Please add any other useful documents for further information e.g. technical specification, drawing, wiring diagram, etc. Replacement of an existing contactor F D W Please photocopy and forward. Questionnaire also available on the ABB Website: www.abb.com/lowvoltage Section: Our offering Select: Control Products > Contactors > Bar mounted contactors 9/8 | ABB 1SBC104004S0201 Brand . . ............................................................... Type ................................................................... Fixing dimension F = . ............... mm Overall dimensions W = . ............... mm H = . ............... mm D = . ............... mm H 9 DC switching Application type DC-1 (resistive load) DC-3 (shunt motors) DC-5 (series motors) No load breaking Other ........................................ L/R ............... ms Number of poles: N.O. ...................... N.C. ..................... Rated operational current Ie ................... A Making current ......................................... A ........... A Breaking current min. ........... A max. Rated operational voltage Ue ................ V DC Questionnaire Specification for R contactors Other information / Application type 9 Please photocopy and forward. Questionnaire also available on the ABB Website: www.abb.com/lowvoltage Section: Our offering Select: Control Products > Contactors > Bar mounted contactors ABB | 9/9 1SBC104004S0201 This document is used to define the contactor specification according to the complete information on the application 2CDC135025C0201 10 10/0 | ABB Motor control and protection Motor control and protection Benefits and advantages 10/2 Technical data 10/3 2CDC135025C0201 10 ABB | 10/1 Motor control and protection Benefits and advantages UMC100-FBP is a flexible, modular and expandable motor management system for constant-speed low-voltage range motors. It's most important tasks include motor protection, prevention of plant standstills and the reduction of down time. This is made possible by early information relating to possible motor problems which avoids unplanned plant standstills. Even if a motor trips, quick diagnosis of the cause of the fault serves to reduce downtime. UMC100-FBP combines in a very compact unit: Motor protection Overload, underload Overvoltage, undervoltage Blocked rotor, low / high current Phase failure, imbalance, phase sequence Earth leakage Thermistor protection Limitation of starts per time One single version with integrated measuring system covers the rated motor current from 0,24 to 63 A Motor control Integrated and easy to parametrize motor starter functions like direct, reverse, star-delta,... Additionally free programmable logic for application specific control functions Expansion modules DX111, DX122 for more I/Os Expansion modules VI150, VI155 for 3-phase voltage measuring Typical application segments Oil & gas Cement Paper Mining Steel Chemical industry Motor diagnostics Quick and comprehensive access to all relevant data via fieldbus and/or operator panel Current, thermal load Phase voltages Power factor Energy Further information UMC & FBP Catalogue UMC & FBP Brochure 2CDC 190 022 D0204 2CDC 135 011 B0202 2CDC135025C0201 10 Communication Communication-independent basic device Freely selectable fieldbus protocol with FieldBusPlug Profibus DP DeviceNet Modbus CANopen Ethernet Modbus TCP 10/2 | ABB Motor control and protection Technical data Basic device UMC100-FBP UMC100-FBP allows the connection of one I/O-expansion module DX111 or DX122, and one voltage module VI150 or VI155. Expansion modules are connected via 2-wire bus, the max. distance to UMC100-FBP is 3 m. Main power Voltage Frequency Rated motor current max 1000 V AC 45 to 65 Hz 0.24 to 63 A, without accessories Greater currents with transformer 11 mm (max 25 mm²) 5, 10, 20, 30, 40 in accordance with EN/IEC 60947-4-1 Separate fuse on network side Transformer diameter Tripping classes Short-circuit protection Control unit Supply voltage Reverse polarity protection Inputs Parametric assignment Addressing LEDs 24 V DC yes 6 digital inputs 24 V DC 1 PTC input 3 relay outputs relay 1 digital output transistor 1 for ABB FieldBusPlug 1 for UMC100-PAN control station 1 for expansion module via fieldbus, control station and / or software Control station or addressing set 3 LEDs: green, yellow, red Environment and mechanical data Fastening Dimensions (W x H x D) Weight Terminal cross-section on DIN busbar (EN50022-35) or with 4 screws x M4 70 x 105 x 110 mm (incl. FieldBusPlug and control panel) 0.39 kg max. 2.5 mm² or 2 x 1.5 mm² Outputs Interfaces 10 I/O-expansion modules DX111 / DX122 Expansion modules to increase the number of I/Os of a UMC100-FBP. Easy use of inputs by parametrizing for fault or warning; individual message on operator panel configurable. Outputs Fastening Dimensions (W x H x D) DX111 DX122 24 V DC 8 digital inputs 24 V DC 8 digital inputs 110/230 V AC 4 relay outputs relay 1 analogue output, 0/4 to 20 mA / 0 to 10 V configurable on DIN busbar (EN50022-35) 45 x 77 x 100 mm (without terminal block) 2CDC135025C0201 Supply voltage Inputs ABB | 10/3 Motor control and protection Technical data NEW Voltage expansion modules Measures the 3 phase voltages of a motor. Different versions for use in grounded and ungrounded networks. Supply voltage Inputs VI150 VI155 Outputs Fastening Dimensions (W x H x D) 24 V DC 3 analogue inputs 150 - 690 V AC For use in grounded networks Maximum operation altitude 2000 m 3 analogue inputs 150 - 690 V AC For use in all networks Maximum operation altitude > 2000 m 1 relay output on DIN busbar (EN50022-35) 22.5 x 77 x 100 mm (without terminal block) Control panel UMC100-PAN Installation on the device or on the switching cabinet door Graphics-enabled and backlit display, 3 LEDs for status indication Freely configurable error messages Multilingual: German, English, French, Italian, Portuguese, Spanish, Russian 10 MTQ22 - UMC100 and Ethernet 2CDC135025C0201 Ethernet connectivity for up to four UMC100 Modbus TCP protocol Supports all network topologies Star Bus Ring with redundancy (MRP protocol) No special Ethernet connectors requried in MCCs Easy to use in widthdrawable applications 10/4 | ABB Notes 2CDC135025C0201 10 ABB | 10/5 Summary_11 11 11/0 | ABB Self resetting current limiting module S800-SCL-SR Ordering details 11/2 Technical data 11/3 Summary_11 11 ABB | 11/1 2CCC413380F0001 S800-SCL-SR Self-resetting current limiting module S800S-SCL-SR Description S800-SCL-SR is ABB’s innovative self-resetting current limiting module which considerably increases the short-circuit breaking capacity of downstream manual motor starters and high performance MCBs. S800-SCL-SR is a self resetting current limiting module based on the S800 technology. It limits the short-circuit current until the downstream means of protection trips. Its current continuity makes it as the ideal solution for group protection: All parallel branches remain operative. This leads to an Expanded application range of the low voltage switchgear whose short-circuit capabilities are usually limited. S800-SCL-SR can be combined with S800S high performance MCB or with manual motor starters. S800-SCL-SR can also back up a single circuit breaker or a group of circuit breakers or motor starters (group protection). Terminals and outside dimensions are identical to the S800 range. 2CCC413381F0001 Ordering details S803W-SCL-SR 11 Self-resetting Type designation Product number EAN number short-circuit limiter IEC version [A] 7612271 1-pole 32 S801S-SCL32-SR 2CCS801901R0539 412012 63 S801S-SCL63-SR 2CCS801901R0599 412036 100 S801S-SCL100-SR 2CCS801901R0639 411992 Weight Pack. [kg] unit 0.25 0.25 0.25 1 1 1 2-pole 32 63 100 S802S-SCL32-SR 2CCS802901R0539 412074 S802S-SCL63-SR 2CCS802901R0599 412098 S802S-SCL100-SR 2CCS802901R0639 412050 0.5 0.5 0.5 1 1 1 3-pole 32 63 100 S803S-SCL32-SR 2CCS803901R0539 411930 S803S-SCL63-SR 2CCS803901R0599 411947 S803S-SCL100-SR 2CCS803901R0639 411954 0.75 0.75 0.75 1 1 1 Self-resetting Type designation Product number EAN number short-circuit limiter IEC/UL version [A] 7612271 3-pole 32 S803W-SCL32-SR 2CCS803917R0539 412319 63 S803W-SCL63-SR 2CCS803917R0599 412326 100 S803W-SCL100-SR 2CCS803917R0639 412302 Weight Pack. [kg] unit 0.75 0.75 0.75 1 1 1 Main dimensions mm, inches 76.50 26.50 53 79.50 6 35 46 S800S-SCL-SR/S803S-SCL S803W-SCL-SR 11/2 | ABB 46 76.50 2CCC413012B0201 6 45 95 142 79.50 45 95 53 35 26.50 S800S-SCL-SR/S803W-SCL-SR Technical data S800S-SCL-SR [A] 32, 63, 100 Rated operational current Ie Pole 1, 2, 3 Rated operational voltage Ue (AC) according to IEC 60947-2 50/60 Hz [V] 400/690 (AC) according to UL 508 50/60 Hz [V] [V] 690 Rated insulation voltage U i [kV] 8 Rated impulse withstand voltage Uimp Rated ultimate short-circuit breaking capacity Icu = Ics according to IEC 60947-2 * (AC) 50/60 Hz 240/415 V [kA] 100 (AC) 50/60 Hz 254/440 V [kA] 100 (AC) 50/60 Hz 277/480 V [kA] 65 (AC) 50/60 Hz 289/500 V [kA] 65 (AC) 50/60 Hz 346/600 V [kA] 65 (AC) 50/60 Hz 400/690 V [kA] 50 Short-circuit rating according to UL 508, CSA 22.2 * (AC) 50/60 Hz 480 V [kA] 65 (AC) 50/60 Hz 600 V [kA] 65 S803W-SCL-SR 32, 63, 100 3 690 600 690 8 100 100 65 65 65 50 65 65 *) Valid only for approved combinations Rated frequency [Hz] 50/60 Mounting position any Connections Cu 1 … 50 rigid (solid/stranded) [mm 2] 1 … 70 flexible [mm2] Tightening torque [Nm] min. 3 / max. 4 [in. lbs.] Feeding optional Mouting on DIN top hat rail EN 60715 Ambient air temperature [°C] –40 … +70 Storage temperature [°C] –40 … +85 Degree of protection IP20 Classification acc. to NF F 16-101, NF F 16-102 I3, F2 Damp Heat IEC 60068-2-30, 55 °C / 95 % r.h. Vibration IEC 60068-2-6, 5–10 Hz / 3 mm and 10–500 Hz / 2 g at 0.5 x Ie Random Vibration IEC 60068-2-64, 5–500 Hz / 2 g at 0.5 x Ie 0.5 x Ie Resistance to climatic conditions IEC 60068-2-1 /-2-2 /-2-30 Standard IEC 60947-2 IEC 60947-4-1 50/60 any 1 … 50 rigid (solid/stranded) 1 … 70 flexible 14–1 AWG min. 3 / max. 4 min. 26.5 / max. 25 optional EN 60715 –40 … +70 –40 … +85 IP20 I3, F2 IEC 60068-2-30, 55 °C / 95 % r.h. IEC 60068-2-6, 5–10 Hz / 3 mm and 10–500 Hz / 2 g at 0.5 x Ie IEC 60068-2-64, 5–500 Hz / 2 g at 11 IEC 60068-2-1 /-2-2 /-2-30 IEC 60947-2 IEC 60947-4-1 UL 508, CSA 22.2 No. 14 Internal resistance at 25°C ambient temperature and nominal power losses Rated current In Internal resistance R i Power losses Pvn [A] [mΩ/pole] [W/pole] 32 2.8 3.6 63 1.3 5.7 100 0.7 7.8 Rated current In [A] 10°C 15°C 20°C 25°C 30°C 35°C 40°C 45°C 50°C 55°C 60°C 65°C 70°C 32 38.2 37.2 35.8 35.2 34.2 33.3 32 30.7 29.8 28.8 27.8 26.5 25.1 63 75.3 73.2 70.6 69.3 67.4 65.5 63 60.5 58.6 56.7 54.8 52.3 49.8 100 119.5 116.2 112 110 107 104 100 96 93 90 87 84 80 ABB | 11/3 2CCC413012B0201 Influence of ambient temperature – single mounted devices S800-SCL-SR Technical data Short circuit breaking capacity S800S-SCL-SR S803W-SCL-SR Rated ultimate short-circuit breaking capacity I cu = Ics according to IEC 60947-2 (AC) 50/60 Hz 240/415 V [kA] 100 100 (AC) 50/60 Hz 254/440 V [kA] 100 100 (AC) 50/60 Hz 277/480 V [kA] 65 65 (AC) 50/60 Hz 289/500 V [kA] 65 65 (AC) 50/60 Hz 346/600 V [kA] 65 65 (AC) 50/60 Hz 400/690 V [kA] 50 50 Short-circuit rating according to UL 508, CSA 22.2 (AC) 50/60 Hz 480 V [kA] 65 (AC) 50/60 Hz 600 V [kA] 65 Coordination Type 500 V AC 690 V AC Fuse Current Limiter Fuse Current Limiter Ics Icu gG, aM S803x-SCL-SR Ics Icu gG, aM S803x-SCL-SR kA kA kA A kA A kA kA kA A kA A MS132-0.16 MS132-0.25 MS132-0.4 MS132-0.63 MS132-1.0 No back-up required No back-up required MS132-1.6 MS132-2.5 20 20 100 35 65* 32, 63,100 3 3 80 35 50** 32, 63,100 MS132-4.0 20 20 100 63 65* 32, 63,100 3 3 80 63 50** 32, 63,100 MS132-6.3 20 20 100 100 65* 32, 63,100 3 3 80 100 50** 32, 63,100 MS132-10 20 20 100 100 65* 32, 63,100 3 3 80 100 50** 32, 63,100 MS132-12 20 20 100 125 65* 32, 63,100 3 3 80 125 50** 32, 63,100 MS132-16 20 20 100 125 65* 32, 63,100 3 3 80 125 50** 32, 63,100 MS132-20 20 20 100 125 65* 32, 63,100 3 3 80 125 50** 32, 63,100 MS132-25 10 10 100 125 65* 63,100 3 3 80 125 50** 63,100 MS132-32 10 10 100 125 65* 63,100 3 3 80 125 50** 63,100 * 100 kA on request ** 80 kA on request 11/4 | ABB 2CCC413012B0201 11 Type 230 V AC 400 V AC 440 V AC Fuse Current Limiter Fuse Current Limiter Fuse Current Limiter Ics Icu gG, aM S803x-SCL-SR Ics Icu gG, aM S803x-SCL-SR Ics Icu gG, aM S803x-SCL-SR kA kA kA A kA A kA kA kA A kA A kA kA kA A kA A MS132-0.16 MS132-0.25 MS132-0.4 MS132-0.63 MS132-1.0 No back-up required No back-up required No back-up required MS132-1.6 MS132-2.5 20 20 100 35 100 32, 63,100 MS132-4.0 20 20 100 63 100 32, 63,100 MS132-6.3 20 20 100 100 100 32, 63,100 MS132-10 20 20 100 100 100 32, 63,100 MS132-12 20 20 100 125 100 32, 63,100 MS132-16 20 20 100 125 100 32, 63,100 MS132-20 20 20 100 125 100 32, 63,100 MS132-25 50 50 100 125 100 63,100 50 50 100 125 100 63,100 20 20 100 125 100 63,100 MS132-32 25 50 100 125 100 63,100 25 50 100 125 100 63,100 20 20 100 125 100 63,100 S800-SCL-SR and S803S-SCL Technical data Installation requirements The total sum of the rated currents of all downstream motor starters or circuit breakers shall not exceed the rated current of the S800-SCL-SR. Furthermore the sum of all load currents including inrush currents shall not exceed the maximum permissible load of the S800-SCL-SR. Maximum load 10 000 1000 10 1 11 0.1 0.01 1 10 n x Ie 100 Multiple of the rated operational current Ie 2CCC413012B0201 Time in s time [s] 100 ABB | 11/5 Summary_12 12 12/0 | ABB General technical data General technical data Coordination with short-circuit protection devices 12/2 Standards, specifications and certifying organizations 12/4 Terms and technical definitions 12/6 Standards and utilization categories 12/8 Degrees of protection 12/10 Climatic withstand of devices 12/11 Summary_12 12 ABB | 12/1 Coordination with short-circuit protection devices In compliance with standards IEC 60947-4-1 and EN 60947-4-1, we define for the contactors and starters the type, rating and characteristics of the short-circuit protection devices SCPD which allow selective protection against overloads and ensure protection against short circuits. Basic functions Any starter is designed to: –– start motors, –– ensure continuous functioning of motors, –– disconnect motors from the supply line, –– guarantee protection of motors against overloads. The starter is typically made up of a switching device (contactor) and an overload protection device (thermal overload relay or electronic overload relay). These two devices MUST be coordinated with equipment capable of providing protection against short circuit (SCPD: short circuit protective device): typically a circuit breaker with magnetic release only or a switch fuse. These are not necessarily part of the starter. Applicable standards IEC 60947-4-1 (EN 60947-4-1) precisely defines the different points to be considered in order to carry out correct coordination. Complete coordination for a combination includes the following points: –– Selectivity test between the overload relay and the short-circuit protection device SCPD. –– Short-circuit condition tests: -- at prospective "r" currents - These currents depend on the rated operational current of the starter (Ie AC-3) and are given by the standard (Table 13). For example: r = 1kA for Ie AC-3 < 16 A r = 3 kA for 16 A < Ie AC-3 < 63 A r = 5 kA for 63 A < Ie AC-3 < 125 A etc. -- at the rated conditional short-circuit current "Iq" - This is the maximum prospective current that the combination can withstand, for example 50 kA. Types of coordination IEC 60947-4-1 (EN 60947-4-1) defines two types of coordination according to the expected level of service continuity. Acceptable extreme damage for the switchgear is divided into two types. Type 1: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will not be able to then operate without being repaired or having parts replaced. Type 2: In short-circuit conditions, the contactor or starter does not endanger persons or installations and will be able to operate afterwards. The risk of contacts light welding is acceptable. In this case, the manufacturer must stipulate the measures to be taken with respect to maintenance of the equipment. The complete ABB offer ABB has acquired years of experience with respect to problems of coordination and is able to make a complete offer based on tests performed in its qualified laboratories. This offer includes 400 V, 500 V, 690 V networks. A complete data base of coordination tables, according to IEC 60947-4-1 (EN 60947-4-1), is available on the ABB Website. In the coordination tables the following short-circuit protection devices are recommended: –– Moulded case circuit-breakers (MCCBs) –– Miniature circuit-breakers (MCBs) –– Switch-disconnector-fuses (aM, gG and BS) –– Manual Motor Starters (MMS). General remarks applicable to all tables –– Each table is defined for a maximum ambient temperature of 40 °C. For higher temperatures, apply a derating factor according to the following rules: -- Fuses: factor of 0.8 applied to In for an ambient temperature of 70 °C -- MCCBs and MCBs: factor of 0.8 applied to In for an ambient temperature of 60 °C -- The starter derating factor depends on the operating conditions of thermal overload relays: Factor of 0.9 applied to In for an ambient temperature of 70 °C. –– Each table is defined for motor currents: 3-phase motors, 4-pole –– Normal starting means a starting time < 2 s. - Difficult starting means an accelerating time 10 s < ts < 30 s Tripping classes of thermal overload relays according to IEC 60947-4-1 (EN 60947-4-1): 10A and 10 Tripping classes of electronic overload relays according to IEC 60947-4-1 (EN 60947-4-1): 10E, 20E, 30E selectable –– In the tables with MCCBs, these are fitted with the magnetic relay alone. Setting is always carried out at > 12.3 Ie AC-3 so that the transient current peak occurring during starting does not lead to tripping. 12/2 | ABB 1SBC101590S0201 - Rev. A 12 Coordination with short-circuit protection devices A complete data base of coordination tables, according to IEC 60947-4-1 (EN 60947-4-1) or UL 508 / UL 60947-4-1, is available on the ABB Website: see below. Selection Simple or multiple selections all from the same screen. Short-circuit protection devices –– Air circuit breakers –– Fuses "gG" or "aM" –– Miniature circuit breaker –– Moulded case circuit breaker –– Manual motor starter Starter type –– Direct-on-line normal start –– Direct-on-line heavy duty –– Star-delta normal start –– Soft starter normal start Coordination –– IEC type 1 or type 2 –– UL type A to Type F Results –– Search results displayed at the bottom of the selection page. –– Only the most appropriate solutions to your application, will be displayed at the bottom of the page. "Enable Smart Current Search" function featured for the short-circuit current where "near to" selected values also are included in the result. –– Possible to print the page to a pdf file or from your printer. –– "Clear selection" function to deselect all selected. Access To find the coordination tables for motor protection, please see: www.abb.com/lowvoltage then go to the right menu: "Support", select: "Online Product Selection Tools" then select "Coordination Tables for motor protection" ABB | 12/3 1SBC101591S0201 - Rev. A 12 Standards, specifications and certifying organizations Definitions ABB low voltage devices are developed and manufactured in accordance with the applicable regulations as stated in the international IEC standards, the European EN standards and the national ones such as NF, DIN, GB and BS. For devices installed in ships, an approval issued by independent classification societies is demanded by the maritime insurance companies. CE Marking: CE marking indicates that the marked equipment conforms to the relevant EU directive. CE marking is part of an administrative procedure and guarantees free movement of the product within the European Community. Standards in Canada and the USA Certification Body certificates (CB certificates) are available to prove the complete conformity to standards The IEC CB (Certification Body) scheme is multilateral agreement between the National Certification Bodies to allow international certification of electrical and electronic products so that a single certification allows worldwide market access. The CB Scheme was established by the International Electrotechnical Committee for conformity testing to standards for electrical equipment (IECEE). Canadian and American specifications are more or less equivalent but differ greatly from IEC standards. UL Underwriters Laboratories USA CSA Canadian Standard Association Canada UL (USA) specifications make the following distinction between devices: Listed Product A product that has been produced under UL's listing and follow-up service program in accordance with the terms of UL's service agreement and that bears the UL listing mark as the manufacturer's declaration that the product complies with UL's requirements. Certified products In some cases, products are validated and tested according to a standard by a certification body and the manufacturer is regularly visited by this body in order to check the respect of the design and the materials used. This process creates a certified product. This is the case of UL (Underwriters Laboratories) and CSA (Canadian Standard Association) for instance (see below). Recognized Component A part or subassembly covered under UL's recognition service and intended for factory installation in listed (or other) products. Recognized components are incomplete in certain construction features or restricted in performance capabilities and not intended for separate installation in the field, rather they are intended for use as components of incomplete equipment submitted for investigation by UL. Final acceptance of the component in the complete equipment is dependent upon its installation and use in accordance with all applicable use conditions and ratings noted in the component report issued by UL, in the guide information and in the individual client's Recognized Component information page. Specifications International Specifications The International Electrotechnical Commission, IEC, which is part of the International Standards Organization, ISO, publishes IEC publications which act as a basis for the world market. European Specifications and National Specifications The European committee for electrotechnical standardization (CENELEC), which groups together European countries, publishes EN standards. 12 These European standards may differ very little from IEC international standards and have similar numbering. The same applies for national standards which use, without exception, the same numbering and reproduce the texts of these unified standards in their entirety. Contradicting national standards are withdrawn. European Directives The guarantee of the free movement of goods within the European Community means that any regulatory differences between member states have been eliminated. The European directives set up common rules that are included in the legislation of each state while contradictory regulations are cancelled. Three directives are essential: –– Low Voltage Directive 2006/95/EC concerns electrical equipment from 0 to 1000 V AC and from 0 to 1500 V DC. This specifies that compliance with the requirements that it sets out is acquired if the equipment conforms to the standards harmonized on an European level. EN 60947-1 and EN 60947-4-1 for contactors. –– Machinery Directive 2006/42/EC for safety specifications of machines and equipment on complete machines. –– Electromagnetic Compatibility Directive 2004/108/EC which concerns all devices able to create electromagnetic disturbance. 12/4 | ABB The combined UL signs for the USA and Canada are recognized by the authorities of both countries. Compulsory China Certification (CCC): The CCC mark is a compulsory certification mark in the field of safety for products sold on the Chinese market. GOST / EAC: Russia (please consult your local ABB sales office) C-Tick: The C-Tick mark certifies compliance with the Australian EMC requirements. The mark is also recognized in New Zealand ANCE: Mexico Marine Approvals The following specifications must be respected when these devices are used on ships: BV Bureau Veritas France DNV Det Norske Veritas Norway GL Germanischer LIoyd Germany LRS LIoyd's Register of Shipping Great Britain ABS America Bureau of Shipping RMRS Russian Maritime Register of Shipping RMRS RRR Russian River Register MRS Maritime Register of Shipping Russia PRS Polski Rejestr Statkow Poland RINA Registro Italiano Navale Italy 1SBC101630S0201 - Rev. A CB scheme Standards, specifications and certifying organizations Specifications (cont.) International Standards IEC 60947-1 Low-voltage switchgear and controlgear – Part 1: General rules IEC 60947-4-1 Low-voltage switchgear and controlgear – Part 4: Contactors and motor starters – Section 1: Electromechanical contactors and motor starters IEC 60947- 5-1 Low-voltage switchgear and controlgear – Part 5: Control circuit devices and switching elements – Section 1: Electromechanical control circuit devices IEC 60947-5-4 Low-voltage switchgear and controlgear – Part 5-4: Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests IEC 60947- 6-1 Low-voltage switchgear and controlgear – Part 6: Multiple function equipment – Section 1: Automatic transfer switching equipment IEC 60204-1 Electrical equipment of industrial machines – Part 1: General requirements IEC 60715 Dimensions of low-voltage switchgear and controlgear. Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations European Standards EN 50 005 Low-voltage switchgear and controlgear for industrial use – Terminal marking and distinctive number: General rules (Annex L of IEC 60947-1). EN 50 011 Low-voltage switchgear and controlgear for industrial use – Terminal marking, distinctive number and distinctive letter for particular contactor relays (Annex M of IEC 60947-5-1) EN 60947-1 Low-voltage switchgear and controlgear – Part 1: General rules. EN 60947-4-1 Low-voltage switchgear and controlgear – Part 4: Contactors and motor starters – Section 1: Electromechanical contactors and motor starters. EN 60947-5-1 Low-voltage switchgear and controlgear – Part 5: Control circuit devices and switching elements – Section 1: Electromechanical control circuit devices. EN 60947-5-4 Low-voltage switchgear and controlgear – Part 5-4: Control circuit devices and switching elements. Method of assessing the performance of low-energy contacts. Special tests. 12 EN 60947- 6-1 Low-voltage switchgear and controlgear – Part 6: Multiple function equipment – Section 1: Automatic transfer switching equipment. EN 60204-1 Electrical equipment of industrial machines – Part 1: General requirements. EN 60 715 Dimensions of low-voltage switchgear and controlgear. Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations. National Standards European countries national standards reproduce the corresponding EN... standards. Codification is built by addition of a prefix to EN numbering. 1SBC101630S0201 - Rev. A For instance: –– France NF EN... –– Germany DIN EN... –– Great Britain BS EN... –– Italy CEI EN... –– Sweden SS EN... ABB | 12/5 Terms and technical definitions Circuits Coordination of protections against short circuit –– auxiliary circuit: All the conductive parts of a contactor designed to be inserted in a different circuit from the main circuit and the contactor control circuits. –– control circuit: All the conductive parts of a contactor (other than the main circuit and the auxiliary circuit) used to control the contactor's closing operation or opening operation or both. –– main circuit: All the conductive parts of a contactor designed to be inserted in the circuit that it controls. The goal here is to protect electromechanical starters and softstarters. IEC 60947-4-1 defines tripping classes 10 A, 10, 20 and 30. Types 10 A, 10, etc. correspond to the maximum tripping time for a making current at 7.2 times the setting current. Furthermore, for each class the standard specifies the tripping time for 1.5 times the setting current and sets the non tripping condition at 1.05 times the setting current. 10 A 10 20 30 s 120 240 480 720 overload release: overload relay or release which operates in the case of overload and also in case of loss of phase. s 2 - 10 4 - 10 6 - 20 9 - 30 Extract from IEC 60947-4-1: Tripping class Max. tripping time for 1.5 times Tripping time for 7.2 times the setting current (cold state) For 1.05 times the setting current No tripping Electromagnetic compatibility AF... contactors comply with IEC 60947-1, 60947-4-1 and EN 60947-1, 60947-4-1 standards. Definitions: Environment A: "Mainly relates to low-voltage non public or industrial networks/locations/installations (EN 50082-2 article 4) including highly disturbing sources". Environment B: "Mainly relates to low-voltage public networks (EN 50082-1 article 5) such as residential, commercial and light industrial locations/installations. Highly disturbing sources such as arc welders are not covered by this environment". 12 The characteristics of the starter must comply with the international standard IEC 60947-4-1 which defines the above items as follows: contactor: a mechanical switching device having only one position of rest, operated otherwise than by hand, capable of making, carrying and breaking currents under normal circuit conditions including overload conditions. All these data are summarized in the table below. the setting current (warm state) The starter is typically made up of a switching device (contactor) and an overload protection device (thermal overload relay or electronic overload relay). These two devices MUST be coordinated with equipment capable of providing protection against short circuit (SCPD: short circuit protective device): typically a circuit breaker with magnetic release only or a switch fuse. These are not necessarily part of the starter. Notice for AF09 ... AF38, AF116 ... AF2650 contactors and NF contactor relays: these products have been designed for environment A. Use of this product in environment B may cause unwanted electromagnetic disturbances in wich case the user may be required to take adequate mitigation measures. circuit-breaker: defined by IEC 60947-2 as a mechanical switching device, capable of making, carrying and breaking currents under normal circuit conditions and also making, carrying for a specified time and breaking currents under specified abnormal circuit conditions. IEC publication 60947-4-1 defines coordination types "1" and "2": –– Type "1" coordination requires that, in the event of a short-circuit, the contactor or starter does not endanger persons or installations and will not then be able to operate without being repaired or parts being replaced. –– Type "2" coordination requires that, in short-circuit conditions, the contactor or starter does not endanger persons or installations and will be able to operate afterwards. The risk of contacts being light welded is acceptable. In this case, the manufacturer must stipulate the measures to be taken with respect to maintenance of the equipment. Rated operational current Ie. Current rated by the manufacturer. It is mainly based on the rated operational voltage Ue, the rated frequency, the utilization category, the rated duty and the type of protective enclosure, if necessary. AF40 ... AF96 have been designed for environment B. Conventional free air thermal current Ith Definitions according to SEMI F47-0706 Current that the contactor can withstand in free air for a duty time of 8 hours without the temperature rise of its various parts exceeding the maximum values given by the standard. SEMIF47-0706 defines the voltage sag immunity required for semiconductor processing, metrology and automated test equipment, and on subsystems and components which are used in the construction of semiconductor processing equipment including but not limited to: –– Power supplies –– Generators –– Robots and factory interface –– Chillers, pumps, blowers –– AC operated contactors and contactor relays –– ... voltage sag: an rms reduction in the AC voltage, at the power frequency, for durations from a half cycle to a few seconds. The IEC terminology for this phenomenon is voltage dip. voltage sag immunity: the ability of equipment to withstand momentary electrical power interruptions or sags 12/6 | ABB Operating cycle or cycle Includes one making operation and one breaking operation. Cycle time This is the sum of the current flow time and the no-current time for given cycle. Electrical durability Number of on-load operating cycles that the contactor is able to carry out. It depends on the operational current, the operational voltage and the utilization category. 1SBC101625S0201 - Rev. A Thermal overload relay tripping classes Any starter is designed to: –– start motors, –– ensure continuous functioning of motors, –– disconnect motors from the supply line, –– guarantee protection of motors against overloads. Terms and technical definitions Mechanical durability Ambient temperature Number of no-current operating cycles that a contactor is able to carry out. Air temperature close to the contactor. Assessed failure rate –– Time constant: Ratio of the inductance to the resistance (L/R = mH/Ω = ms). –– Short-time withstand current: Current that the contactor is able to withstand in closed position for a short time interval and in specified conditions. –– Closing time: Time interval between the coil energization and the instant the contacts touch on all the poles. –– Opening time: Time interval between the coil de-energization and the instant the contacts separate on all the poles. Defined according to IEC 60947-5-4. This rate is given in standard industrial environments for the contactor relays and for the built-in auxiliary contact of contactors. Load factor Ratio of the on-load operating time to the total cycle time x 100. Time Switching frequency Number of switching cycles per hour. Rated control voltage Uc Control voltage value for which the control circuit is sized. Plugging Stopping or fast reversal in rotation direction of a motor by two supply leads being interchanged while the motor is running. Rated operational voltage Ue Voltage to which the contactor's utilization characteristics refer. In three-phase it is the phase-to-phase voltage. Inching Energization of a motor's circuit repeatedly or for short periods with the aim of obtaining small movements of the driven mechanism. Rated insulation voltage Ui Coil operating limits Rated impulse withstand voltage Uimp Expressed in multiples of the nominal control circuit voltage Uc for the upper and lower limits. Mounting position Comply with the manufacturer's instructions. Restrictions are to be taken into account for certain mounting positions. Reference voltage for dielectric tests and creepage distances. Peak value of an impulse voltage, having a specified form and polarity, which does not cause breakdown in specific test conditions. Shock withstand Requirement for vehicles, crane drives, installations on board ships and plug-in equipment. For the acceptable "g" values, the contacts must not change position and the thermal overload relays must not trip. Rated breaking or making capacity Root mean square (r.m.s.) value of the current that the contactor is able to break or make at a given voltage according to the conditions specified by standards and for a given utilization category. Resistance to vibrations Requirements for vehicles, boats and other means of transport. For the specified vibration amplitude and frequency values the device must remain able to operate. 12 Intermittent duty 1SBC101625S0201 - Rev. A Duty during which the contactor is successively closed or open for periods which are too short to enable the contactor to achieve thermal balance. ABB | 12/7 Standards and utilization categories Utilization categories: A contactor's duty is characterised by the utilization category together with the rated operational voltage and current indicated. Utilization categories for contactors according to IEC 60947-4-1: Alternating current: Direct current: AC-1 AC-2 AC-3 AC-4 AC-5a AC-5b AC-6a AC-6b AC-8a AC-8b DC-1 DC-3 DC-5 DC-6 Non-inductive or slightly inductive loads, resistance furnaces. Slip-ring motors: starting, switching off. Cage motors: starting, switching off running motors. Cage motors: starting, plugging, inching. Discharge lamp switching. Incandescent lamp switching. Transformer switching. Capacitor bank switching. Hermetic refrigeration compressor motor control with manual resetting of overload releases. Hermetic refrigeration compressor motor control with automatic resetting of overload releases. Non inductive or slightly inductive loads, resistance furnaces. Shunt motors: starting, plugging, inching, dynamic breaking of DC motors. Series motors: starting, plugging, inching, dynamic breaking of DC motors. Incandescent lamp switching. Utilization categories for contactor relays according to IEC 60947-5-1: Alternating current: Direct current: AC-12 AC-13 AC-14 AC-15 DC-12 DC-13 DC-14 Control Control Control Control Control Control Control of of of of of of of resistive loads and static loads with opto-coupler isolation. static loads with transformer isolation. weak electromagnetic loads (≤ 72 VA). electromagnetic loads (> 72 VA). resistive loads and static loads with opto-coupler isolation. DC electromagnets. DC electromagnets having economy resistors. In fact some applications, and the specific criteria characterizing the various loads controlled by contactors, may modify the utilization characteristics of the contactors. The main applications concerned are: Capacitor bank switching Account must be taken of high peaks when the current is made and of harmonic currents during continuous duty. For this application, IEC publication 60947-4-1 stipulates utilization category AC-6b. The operational currents or powers acceptable for the contactors are determined by our electrical tests; IEC publication 60947-4-1 gives the calculating formula for determining the operational current (Table 9). Transformer switching Account must be taken of the peaks due to magnetization phenomena when the current is made. For this application, IEC publication 60947-4-1 stipulates utilization category AC-6a. The operational currents or powers acceptable for the contactors are determined using the values obtained for AC-3 or AC-4 category tests and the calculating formula given in IEC 60947-4-1 (Table 9). Lighting circuit switching The current peaks occurring on energization of the circuit and the power factor depend on the type of lamps, the connection mode and whether or not there is compensation. For this application, IEC publication 60947-4-1 stipulates two standard utilization categories: –– AC-5a for discharge lamp switching. –– AC-5b for incandescent lamp switching. Slip-ring motor switching The contactors used for short-circuiting rotor resistors can be used for rotor voltages up to 2 times the rated operational voltage. The conditions of use of rotor contactors depend on the connection mode of the main poles. IEC 60947-4-1 stipulates AC-2 utilization category for startor contactor. 1SBC101626S0201 - Rev. A 12 12/8 | ABB Standards and utilization categories Utilization categories (cont.) DC power circuit switching Arc suppression is more difficult in direct current than in alternating current. Higher the time constant and voltage, heavier the breaking conditions: consequently several poles have to be connected in series. AC high current circuit switching Possibility of increasing performances by connecting poles in parallel. Circuit switching during temporary and intermittent duty In these cases higher operational currents are acceptable. Influence of the length of the conductors used in the contactor control circuit According to the operational voltages, the cross-sectional areas, the coil consumption and the control layout, difficulties due to line resistances and capacitances may appear during contactor closing and opening orders. Making and breaking conditions for utilization categories Utilization category Durability test conditions Making conditions I/Ie U/Ue Cos. ϕ or L/R (ms) Breaking conditions I/Ie U/Ue Cos. ϕ or L/R (ms) Occasional operation Making and breaking capacities - 50 operating cycles Making conditions Breaking conditions Ic/Ie Ur/Ue Ic/Ie Ur/Ue Cos. ϕ or L/R (ms) Cos. ϕ or L/R (ms) Contactors for AC circuit switching AC-1 AC-2 AC-3 AC-4 Ie 17 < Ie Ie Ie 17 < Ie Ie < 17 < 100 > 100 < 17 < 100 > 100 A A A A A A 1 2.5 6 6 6 6 6 6 1 1 1 1 1 1 1 1 0.95 0.65 0.65 0.35 0.35 0.65 0.35 0.35 1 2.5 1 1 1 6 6 6 1 1 0.17 0.17 0.17 1 1 1 0.95 0.65 0.65 0.35 0.35 0.65 0.35 0.35 1.5 4 10 10 10 12 12 12 1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.05 0.8 0.65 0.45 0.45 0.35 0.45 0.45 0.35 1.5 4 8 8 8 10 10 10 1.05 1.05 1.05 1.05 1.05 1.05 1.05 1.05 0.8 0.65 0.45 0.45 0.35 0.45 0.45 0.35 1 1 1 1 2 7.5 1 2.5 2.5 1 1 1 1 2 7.5 1.5 4 4 1.05 1.05 1.05 1 2.5 15 1.5 4 4 1.05 1.05 1.05 1 2.5 15 – 0.7 – 1 – 1 – 0.4 6 10 1.1 1.1 0.7 0.3 6 10 1.1 1.1 0.7 0.3 T0.95 6 P(1) – Occasional operation Making and breaking capacities - 50 operating cycles Making conditions Breaking conditions Ic/Ie Ur/Ue T0.95 Ic/Ie Ur/Ue 1.1 1.1 6 P(1) 1.1 1.1 10 1.1 15 ms 10 1.1 Contactors for DC circuit switching 1 2.5 2.5 DC-1 DC-3 DC-5 12 Contactor relays for AC circuit switching AC-14 AC-15 (≤ 72 VA) (> 72 VA) – 10 – 1 Contactor relays for AC circuit switching Utilization category Standard operation DC-13 DC-14 Making conditions I/Ie U/Ue 1 1 – – T0.95 6 P(1) – Breaking conditions I/Ie U/Ue 1 1 – – T0.95 6 P(1) 15 ms Key: U (I) = applied voltage (current) Ur = recovery voltage L/R = test circuit time constant Ue (Ie) = rated operational voltage (current) Ic =m aking and breaking current expressed in DC or in AC like the r.m.s. value of the symmetrical components T0.95 = t ime required to reach 95% of the current in steady-state conditions, expressed in milliseconds ABB | 12/9 1SBC101626S0201 - Rev. A (1) T he value "6 x P" is the result of an empirical relation which is estimated to represent most DC magnetic loads up to the highest limit of P = 50 W (6 x P = 300 ms). It is accepted that loads having drawn energy above 50 W are made up of weaker loads in parallel. As a consequence, the 300 ms value must form the highest limit whatever the value of the power drawn. Degrees of protection General In an installation, the degree of protection required for electrical equipment depends on the environmental characteristics. The degree of protection, ensured by the enclosure of equipment or by the cubicle containing the equipment is expressed by the IP code which gives the level of protection against access to hazardous parts, the ingress of foreign bodies and/or the ingress of water, in compliance with IEC 60529, IEC 60947-1. Besides the IP symbol, the complete code has two figures followed (optionally) by two additional letters. A short description of the elements used in IP coding is given below. IP... code Figures or letters Specifications for installation protection Protection of persons 0 1 2 3 4 5 6 Against ingress of foreign bodies No protection Diameter > 50 mm Diameter > 12.5 mm Diameter > 2.5 mm Diameter > 1 mm Limited protection against dust Total protection against dust Against access to hazardous parts with: No protection Back of hand Finger Tool Wire Wire Wire 0 1 2 3 4 5 6 7 8 Against entrance of water having a harmful effect No protection Vertical dripping Dripping at a vertical angle of < 15° Rain at a vertical angle of < 60° Splashing Low pressure water jet Powerful water jets Temporary immersion Permanent immersion A B C D Against ingress of foreign bodies Stopped by a barrier with a 50 mm Ø sphere Entrance of test finger limited to 80 mm Wire with 2.5 mm Ø and length of 100 mm Wire with 1 mm Ø and length of 100 mm H M S W Specific additional information High voltage apparatus Moving parts which are moving during water test Moving parts which are stationary during water test Specified atmospheric conditions First figure Second figure Additional letter (optional) for use with: First figure 0 First figure 0 or 1 First figure 1 or 2 First figure 2 or 3 Additional letter (optional) Against access to hazardous parts with: Back of hand Finger Tool Wire – Note: The type of enclosure or cubicle in which the equipment must be installed prevails with respect to the degree of protection. 1SBC101627S0201 12 12/10 | ABB Climatic withstand of devices The life time of devices are mainly influenced by series of climatic factors which cause their corrosion. In practice, besides climatic conditions, there are other factors which may damage equipment such as fungi, insects (termites), dust, work site dirt and aggressive environment (salty or sulphurous atmosphere, etc.) which can often only be identified at the place of installation. Climatic stress, definitions and test conditions are dealt with in national publications such as the DIN 50 series and UTE 63-100 publication which are attached to international publications such as IEC 60068. The test conditions are: Description Symbolization Time of one cycle Cycle phase time Humidity and variable temperature IEC 60068-2-30 Test Db 24 hours 12 hours including rise in temperature 12 hours including cooling (open device) Temperature in test chamber 40 °C Relative humidity 25 °C 95 % 95 % ABB contactors have been used for many years in the most countries, with hot and humid climates for example: Brazil, Indonesia, India or on ships. Experience has shown that ABB devices can be used in most countries throughout the world. The climate of the country in which the apparatus is installed is not the determining choice factor. Account must be taken of: –– the immediate environment of the devices (sheltered, ventilated, temperature), –– the aggressivity of the immediate atmosphere at the place of installation, –– the length and frequency of non operating periods. In the case of frequent condensation (i.e. the formation of condensation caused by rapid changes in temperature), heating resistors must be installed in cubicles (100 to 250 W per m³ of enclosure). The table below gives the cases where heating is necessary. Environment Inside premises Outside, sheltered Outside or by the seaside No running water no condensation With running water No running water no condensation With running water Operating conditions Climate Internal heating Continuous or not All climates of enclosure Without Continuous Frequent or long stops All climates Temperate Tropical Temperate Tropical All climates Temperate Tropical Without Without With Without With Without Without With Continuous or not Continuous Frequent or long stops 12 1SBC101628S0201 The entrance of dust, insects, dirt, etc. in devices may be prevented if the appropriate degree of protection according to IEC 60529 is chosen (See "Degree of protection" table). ABB | 12/11 Index Order code classification 13 Type Page 1SAM101923R0002 MSMN 2/38 1SAM101923R0012 MSMNO 2/38 1SAM201901R1001 HKF1-11 2/15 1SAM201901R1002 HKF1-20 2/15 1SAM201902R1001 HK1-11 2/15 1SAM201902R1002 HK1-20 2/15 1SAM201902R1003 HK1-02 2/15 1SAM201902R1004 HK1-20L 2/15 1SAM201903R1001 SK1-11 2/15 1SAM201903R1002 SK1-20 2/15 1SAM201903R1003 SK1-02 2/15 1SAM201904R1001 UA1-24 2/16 1SAM201904R1002 UA1-48 2/16 1SAM201904R1003 UA1-60 2/16 1SAM201904R1004 UA1-110 2/16 1SAM201904R1005 UA1-230 2/16 1SAM201904R1006 UA1-400 2/16 1SAM201904R1007 UA1-415 2/16 1SAM201904R1008 UA1-208 2/16 1SAM201904R1009 UA1-575 2/16 1SAM201904R1010 UA1-20 2/16 1SAM201906R1102 PS1-2-0-65 2/20 1SAM201906R1103 PS1-3-0-65 2/20 1SAM201906R1104 PS1-4-0-65 2/20 1SAM201906R1105 PS1-5-0-65 2/20 1SAM201906R1112 PS1-2-1-65 2/20 1SAM201906R1113 PS1-3-1-65 2/20 1SAM201906R1114 PS1-4-1-65 2/20 1SAM201906R1115 PS1-5-1-65 2/20 1SAM201906R1122 PS1-2-2-65 2/20 1SAM201906R1123 PS1-3-2-65 2/20 1SAM201906R1124 PS1-4-2-65 2/20 1SAM201906R1125 PS1-5-2-65 2/20 1SAM201907R1101 S1-M1-25 2/20 1SAM201907R1102 S1-M2-25 2/20 1SAM201907R1103 S1-M3-25 2/20 1SAM201908R1001 BS1-3 2/20 1SAM201909R1001 FS116 2/20 1SAM201909R1021 MSAH1 2/38 1SAM201910R1001 AA1-24 2/16 1SAM201910R1002 AA1-110 2/16 1SAM201910R1003 AA1-230 2/16 1SAM201910R1004 AA1-400 2/16 1SAM201911R1010 IB132-G 2/22 1SAM201911R1011 IB132-Y 2/22 1SAM201912R1010 DMS132-G 2/22 1SAM201912R1011 DMS132-Y 2/22 1SAM201913R1103 S1-M3-35 2/20 1SAM201914R1001 PB1-1-32 2/20 1SAM201914R1002 S1-PB1-25 2/20 1SAM201916R1103 PS1-3-0-100 2/20 1SAM201916R1104 PS1-4-0-100 2/20 1SAM201916R1105 PS1-5-0-100 2/20 1SAM201916R1113 PS1-3-1-100 2/20 1SAM201916R1114 PS1-4-1-100 2/20 1SAM201916R1115 PS1-5-1-100 2/20 1SAM201916R1123 PS1-3-2-100 2/20 1SAM201920R1000 MSH-AR 2/38 1SAM201920R1001 MSHD-LB 2/38 1SAM201920R1002 MSHD-LY 2/38 1SAM201920R1011 MSHD-LTB 2/38 1SAM201920R1012 MSHD-LTY 2/38 1SAM250000R1001 MS116-0.16 2/4 1SAM250000R1002 MS116-0.25 2/4 1SAM250000R1003 MS116-0.4 2/4 1SAM250000R1004 MS116-0.63 2/4 1SAM250000R1005 MS116-1.0 2/4 1SAM250000R1006 MS116-1.6 2/4 1SAM250000R1007 MS116-2.5 2/4 1SAM250000R1008 MS116-4.0 2/4 1SAM250000R1009 MS116-6.3 2/4 1SAM250000R1010 MS116-10 2/4 1SAM250000R1011 MS116-16 2/4 1SAM250000R1012 MS116-12 2/4 1SAM250000R1013 MS116-20 2/4 1SAM250000R1014 MS116-25 2/4 1SAM250000R1015 MS116-32 2/4 1SAM250005R1001 MS116-0.16-HKF1-11 2/4 1SAM250005R1002 MS116-0.25-HKF1-11 2/4 1SAM250005R1003 MS116-0.4-HKF1-11 2/4 1SAM250005R1004 MS116-0.63-HKF1-11 2/4 1SAM250005R1005 MS116-1.0-HKF1-11 2/4 1SAM250005R1006 MS116-1.6-HKF1-11 2/4 1SAM250005R1007 MS116-2.5-HKF1-11 2/4 1SAM250005R1008 MS116-4.0-HKF1-11 2/4 1SAM250005R1009 MS116-6.3-HKF1-11 2/4 1SAM250005R1010 MS116-10.0-HKF1-11 2/4 1SAM250005R1011 MS116-16.0-HKF1-11 2/4 1SAM250005R1012 MS116-12.0-HKF1-11 2/4 1SAM250005R1013 MS116-20-HKF1-11 2/4 13/0 | ABB Order code Type Page 1SAM250005R1014 MS116-25-HKF1-11 2/4 1SAM250005R1015 MS116-32-HKF1-11 2/4 1SAM301901R1001 CK1-11 2/15 1SAM301901R1002 CK1-20 2/15 1SAM301901R1003 CK1-02 2/15 1SAM340000R1001 MS132-0.16T 2/7 1SAM340000R1002 MS132-0.25T 2/7 1SAM340000R1003 MS132-0.4T 2/7 1SAM340000R1004 MS132-0.63T 2/7 1SAM340000R1005 MS132-1.0T 2/7 1SAM340000R1006 MS132-1.6T 2/7 1SAM340000R1007 MS132-2.5T 2/7 1SAM340000R1008 MS132-4.0T 2/7 1SAM340000R1009 MS132-6.3T 2/7 1SAM340000R1010 MS132-10T 2/7 1SAM340000R1011 MS132-16T 2/7 1SAM340000R1012 MS132-12T 2/7 1SAM340000R1013 MS132-20T 2/7 1SAM340000R1014 MS132-25T 2/7 1SAM350000R1001 MS132-0.16 2/5 1SAM350000R1002 MS132-0.25 2/5 1SAM350000R1003 MS132-0.4 2/5 1SAM350000R1004 MS132-0.63 2/5 1SAM350000R1005 MS132-1.0 2/5 1SAM350000R1006 MS132-1.6 2/5 1SAM350000R1007 MS132-2.5 2/5 1SAM350000R1008 MS132-4.0 2/5 1SAM350000R1009 MS132-6.3 2/5 1SAM350000R1010 MS132-10 2/5 1SAM350000R1011 MS132-16 2/5 1SAM350000R1012 MS132-12 2/5 1SAM350000R1013 MS132-20 2/5 1SAM350000R1014 MS132-25 2/5 1SAM350000R1015 MS132-32 2/5 1SAM350005R1001 MS132-0.16-HKF1-11 2/5 1SAM350005R1002 MS132-0.25-HKF1-11 2/5 1SAM350005R1003 MS132-0.4-HKF1-11 2/5 1SAM350005R1004 MS132-0.63-HKF1-11 2/5 1SAM350005R1005 MS132-1.0-HKF1-11 2/5 1SAM350005R1006 MS132-1.6-HKF1-11 2/5 1SAM350005R1007 MS132-2.5-HKF1-11 2/5 1SAM350005R1008 MS132-4.0-HKF1-11 2/5 1SAM350005R1009 MS132-6.3-HKF1-11 2/5 1SAM350005R1010 MS132-10.0-HKF1-11 2/5 1SAM350005R1011 MS132-16.0-HKF1-11 2/5 1SAM350005R1012 MS132-12.0-HKF1-11 2/5 1SAM350005R1013 MS132-20-HKF1-11 2/5 1SAM350005R1014 MS132-25-HKF1-11 2/5 1SAM350005R1015 MS132-32-HKF1-11 2/5 1SAM360000R1001 MO132-0.16 2/6 1SAM360000R1002 MO132-0.25 2/6 1SAM360000R1003 MO132-0.4 2/6 1SAM360000R1004 MO132-0.63 2/6 1SAM360000R1005 MO132-1.0 2/6 1SAM360000R1006 MO132-1.6 2/6 1SAM360000R1007 MO132-2.5 2/6 1SAM360000R1008 MO132-4.0 2/6 1SAM360000R1009 MO132-6.3 2/6 1SAM360000R1010 MO132-10 2/6 1SAM360000R1011 MO132-16 2/6 1SAM360000R1012 MO132-12 2/6 1SAM360000R1013 MO132-20 2/6 1SAM360000R1014 MO132-25 2/6 1SAM360000R1015 MO132-32 2/6 1SAM401901R1001 HK4-11 2/32 1SAM401901R1002 HK4-W 2/32 1SAM401902R1001 HKS4-11 2/32 1SAM401902R1002 HKS4-20 2/32 1SAM401902R1003 HKS4-02 2/32 1SAM401904R1001 SK4-11 2/32 1SAM401905R1001 UA4-110 2/32 1SAM401905R1002 UA4-230 2/32 1SAM401905R1003 UA4-400 2/32 1SAM401905R1004 UA4-24 2/32 1SAM401906R1001 UA4-HK-230 2/32 1SAM401906R1002 UA4-HK-400 2/32 1SAM401907R1001 AA4-24 2/32 1SAM401907R1002 AA4-110 2/32 1SAM401907R1003 AA4-230 2/32 1SAM401907R1004 AA4-400 2/32 1SAM401908R1001 KA450 2/35 1SAM401910R1001 TB450 2/35 1SAM401911R1001 PS4-2-0 2/35 1SAM401911R1002 PS4-3-0 2/35 1SAM401911R1003 PS4-4-0 2/35 1SAM401911R1004 PS4-2-2 2/35 1SAM401911R1005 PS4-3-2 2/35 1SAM401911R1006 PS4-4-2 2/35 1SAM401911R1007 S4-M1 2/35 1SAM401911R1008 BS4-3 2/35 Order code Type 1SAM401912R1001 DX495 1SAM450000R1005 MS450-40 1SAM450000R1006 MS450-45 1SAM450000R1007 MS450-50 1SAM460000R1005 MO450-40 1SAM460000R1006 MO450-45 1SAM460000R1007 MO450-50 1SAM501901R1001 KA495 1SAM501902R1001 KA495C 1SAM550000R1007 MS495-63 1SAM550000R1008 MS495-75 1SAM550000R1009 MS495-90 1SAM550000R1010 MS495-100 1SAM560000R1007 MO495-63 1SAM560000R1008 MO495-75 1SAM560000R1009 MO495-90 1SAM560000R1010 MO495-100 1SAM580000R1004 MS497-32 1SAM580000R1005 MS497-40 1SAM580000R1006 MS497-50 1SAM580000R1007 MS497-63 1SAM580000R1008 MS497-75 1SAM580000R1009 MS497-90 1SAM580000R1010 MS497-100 1SAM590000R1004 MO496-32 1SAM590000R1005 MO496-40 1SAM590000R1006 MO496-50 1SAM590000R1007 MO496-63 1SAM590000R1008 MO496-75 1SAM590000R1009 MO496-90 1SAM590000R1010 MO496-100 1SAX101110R0001 DB16E 1SAX101910R1001 DB19EF 1SAX111001R1101 E16DU-0.32 1SAX111001R1102 E16DU-1.0 1SAX111001R1103 E16DU-2.7 1SAX111001R1104 E16DU-6.3 1SAX111001R1105 E16DU-18.9 1SAX121001R1101 EF19-0.32 1SAX121001R1102 EF19-1.0 1SAX121001R1103 EF19-2.7 1SAX121001R1104 EF19-6.3 1SAX121001R1105 EF19-18.9 1SAX201110R1001 DB45E 1SAX211001R1101 E45DU-30 1SAX211001R1102 E45DU-45 1SAX221001R1101 EF45-30 1SAX221001R1102 EF45-45 1SAX301110R1001 DB80E 1SAX301110R1002 DB140E 1SAX311001R1101 E80DU-80 1SAX321001R1101 E140DU-140 1SAX331001R1101 EF65-70 1SAX331001R1102 EF65-56 1SAX341001R1101 EF96-100 1SAX351001R1101 EF146-150 1SAX531001R1101 EF205-210 1SAX611001R1101 EF370-380 1SAX721001R1101 EF460-500 1SAX821001R1101 EF750-800 1SAZ401110R0001 DB200 1SAZ401901R1001 LT200/A 1SAZ421201R1001 TA200DU-90 1SAZ421201R1002 TA200DU-110 1SAZ421201R1003 TA200DU-135 1SAZ421201R1004 TA200DU-150 1SAZ421201R1005 TA200DU-175 1SAZ421201R1006 TA200DU-200 1SAZ431201R1001 TF140DU-90 1SAZ431201R1002 TF140DU-110 1SAZ431201R1003 TF140DU-135 1SAZ431201R1004 TF140DU-142 1SAZ701901R0001 DB16 1SAZ701902R0001 DB42 1SAZ701903R1001 WRH-F 1SAZ701903R1011 WRB-400 1SAZ701903R1012 WRB-600 1SAZ701903R1013 WRB-1000 1SAZ701903R1030 WRBG 1SAZ711201R1005 T16-0.13 1SAZ711201R1008 T16-0.17 1SAZ711201R1009 T16-0.23 1SAZ711201R1013 T16-0.31 1SAZ711201R1014 T16-0.41 1SAZ711201R1017 T16-0.55 1SAZ711201R1021 T16-0.74 1SAZ711201R1023 T16-1.0 1SAZ711201R1025 T16-1.3 1SAZ711201R1028 T16-1.7 1SAZ711201R1031 T16-2.3 Page 2/35 2/23 2/23 2/23 2/27 2/27 2/27 2/35 2/35 2/23 2/23 2/23 2/23 2/27 2/27 2/27 2/27 2/23 2/23 2/23 2/23 2/23 2/23 2/23 2/27 2/27 2/27 2/27 2/27 2/27 2/27 7/32 7/33 7/28 7/28 7/28 7/28 7/28 7/33 7/33 7/33 7/33 7/33 7/32 7/28 7/28 7/33 7/33 7/32 7/32 7/28 7/28 7/37 7/37 7/37 7/37 7/41 7/41 7/45 7/45 7/24 7/24 7/24 7/24 7/24 7/24 7/24 7/24 7/20 7/20 7/20 7/20 7/4 7/8 7/51 7/51 7/51 7/51 7/51 7/4 7/4 7/4 7/4 7/4 7/4 7/4 7/4 7/4 7/4 7/4 Index Order code Index Order code classification Type 1SAZ711201R1033 T16-3.1 1SAZ711201R1035 T16-4.2 1SAZ711201R1038 T16-5.7 1SAZ711201R1040 T16-7.6 1SAZ711201R1043 T16-10 1SAZ711201R1045 T16-13 1SAZ711201R1047 T16-16 1SAZ721201R1005 TF42-0.13 1SAZ721201R1008 TF42-0.17 1SAZ721201R1009 TF42-0.23 1SAZ721201R1013 TF42-0.31 1SAZ721201R1014 TF42-0.41 1SAZ721201R1017 TF42-0.55 1SAZ721201R1021 TF42-0.74 1SAZ721201R1023 TF42-1.0 1SAZ721201R1025 TF42-1.3 1SAZ721201R1028 TF42-1.7 1SAZ721201R1031 TF42-2.3 1SAZ721201R1033 TF42-3.1 1SAZ721201R1035 TF42-4.2 1SAZ721201R1038 TF42-5.7 1SAZ721201R1040 TF42-7.6 1SAZ721201R1043 TF42-10 1SAZ721201R1045 TF42-13 1SAZ721201R1047 TF42-16 1SAZ721201R1049 TF42-20 1SAZ721201R1051 TF42-24 1SAZ721201R1052 TF42-29 1SAZ721201R1053 TF42-35 1SAZ721201R1055 TF42-38 1SAZ811201R1001 TF65-28 1SAZ811201R1002 TF65-33 1SAZ811201R1003 TF65-40 1SAZ811201R1004 TF65-47 1SAZ811201R1005 TF65-53 1SAZ811201R1006 TF65-60 1SAZ811201R1007 TF65-67 1SAZ911201R1001 TF96-51 1SAZ911201R1002 TF96-60 1SAZ911201R1003 TF96-68 1SAZ911201R1004 TF96-78 1SAZ911201R1005 TF96-87 1SAZ911201R1006 TF96-96 1SBH101001R1622 NS22E-16 1SBH101001R1631 NS31E-16 1SBH101001R1640 NS40E-16 1SBH101001R1644 NS44E-16 1SBH101001R1653 NS53E-16 1SBH101001R1662 NS62E-16 1SBH101001R1671 NS71E-16 1SBH101001R1680 NS80E-16 1SBH101001R2022 NS22E-20 1SBH101001R2031 NS31E-20 1SBH101001R2040 NS40E-20 1SBH101001R2044 NS44E-20 1SBH101001R2053 NS53E-20 1SBH101001R2062 NS62E-20 1SBH101001R2071 NS71E-20 1SBH101001R2080 NS80E-20 1SBH101001R2622 NS22E-26 1SBH101001R2631 NS31E-26 1SBH101001R2640 NS40E-26 1SBH101001R2644 NS44E-26 1SBH101001R2653 NS53E-26 1SBH101001R2662 NS62E-26 1SBH101001R2671 NS71E-26 1SBH101001R2680 NS80E-26 1SBH101001R2822 NS22E-28 1SBH101001R2831 NS31E-28 1SBH101001R2840 NS40E-28 1SBH101001R2844 NS44E-28 1SBH101001R2853 NS53E-28 1SBH101001R2862 NS62E-28 1SBH101001R2871 NS71E-28 1SBH101001R2880 NS80E-28 1SBH101004R1622 NS22ES-16 1SBH101004R1631 NS31ES-16 1SBH101004R1640 NS40ES-16 1SBH101004R1644 NS44ES-16 1SBH101004R1653 NS53ES-16 1SBH101004R1662 NS62ES-16 1SBH101004R1671 NS71ES-16 1SBH101004R1680 NS80ES-16 1SBH101004R2022 NS22ES-20 1SBH101004R2031 NS31ES-20 1SBH101004R2040 NS40ES-20 1SBH101004R2044 NS44ES-20 1SBH101004R2053 NS53ES-20 1SBH101004R2062 NS62ES-20 1SBH101004R2071 NS71ES-20 Page Order code 7/4 7/4 7/4 7/4 7/4 7/4 7/4 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/12 7/12 7/12 7/12 7/12 7/12 7/12 7/16 7/16 7/16 7/16 7/16 7/16 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 4/62 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 1SBH101004R2080 NS80ES-20 1SBH101004R2622 NS22ES-26 1SBH101004R2631 NS31ES-26 1SBH101004R2640 NS40ES-26 1SBH101004R2644 NS44ES-26 1SBH101004R2653 NS53ES-26 1SBH101004R2662 NS62ES-26 1SBH101004R2671 NS71ES-26 1SBH101004R2680 NS80ES-26 1SBH101004R2822 NS22ES-28 1SBH101004R2831 NS31ES-28 1SBH101004R2840 NS40ES-28 1SBH101004R2844 NS44ES-28 1SBH101004R2853 NS53ES-28 1SBH101004R2862 NS62ES-28 1SBH101004R2871 NS71ES-28 1SBH101004R2880 NS80ES-28 1SBH103001R8122 NSL22E-81 1SBH103001R8131 NSL31E-81 1SBH103001R8140 NSL40E-81 1SBH103001R8144 NSL44E-81 1SBH103001R8153 NSL53E-81 1SBH103001R8162 NSL62E-81 1SBH103001R8171 NSL71E-81 1SBH103001R8180 NSL80E-81 1SBH103001R8322 NSL22E-83 1SBH103001R8331 NSL31E-83 1SBH103001R8340 NSL40E-83 1SBH103001R8344 NSL44E-83 1SBH103001R8353 NSL53E-83 1SBH103001R8362 NSL62E-83 1SBH103001R8371 NSL71E-83 1SBH103001R8380 NSL80E-83 1SBH103001R8622 NSL22E-86 1SBH103001R8631 NSL31E-86 1SBH103001R8640 NSL40E-86 1SBH103001R8644 NSL44E-86 1SBH103001R8653 NSL53E-86 1SBH103001R8662 NSL62E-86 1SBH103001R8671 NSL71E-86 1SBH103001R8680 NSL80E-86 1SBH103001R8822 NSL22E-88 1SBH103001R8831 NSL31E-88 1SBH103001R8840 NSL40E-88 1SBH103001R8844 NSL44E-88 1SBH103001R8853 NSL53E-88 1SBH103001R8862 NSL62E-88 1SBH103001R8871 NSL71E-88 1SBH103001R8880 NSL80E-88 1SBH103004R8122 NSL22ES-81 1SBH103004R8131 NSL31ES-81 1SBH103004R8140 NSL40ES-81 1SBH103004R8144 NSL44ES-81 1SBH103004R8153 NSL53ES-81 1SBH103004R8162 NSL62ES-81 1SBH103004R8171 NSL71ES-81 1SBH103004R8180 NSL80ES-81 1SBH103004R8322 NSL22ES-83 1SBH103004R8331 NSL31ES-83 1SBH103004R8340 NSL40ES-83 1SBH103004R8344 NSL44ES-83 1SBH103004R8353 NSL53ES-83 1SBH103004R8362 NSL62ES-83 1SBH103004R8371 NSL71ES-83 1SBH103004R8380 NSL80ES-83 1SBH103004R8622 NSL22ES-86 1SBH103004R8631 NSL31ES-86 1SBH103004R8640 NSL40ES-86 1SBH103004R8644 NSL44ES-86 1SBH103004R8653 NSL53ES-86 1SBH103004R8662 NSL62ES-86 1SBH103004R8671 NSL71ES-86 1SBH103004R8680 NSL80ES-86 1SBH103004R8822 NSL22ES-88 1SBH103004R8831 NSL31ES-88 1SBH103004R8840 NSL40ES-88 1SBH103004R8844 NSL44ES-88 1SBH103004R8853 NSL53ES-88 1SBH103004R8862 NSL62ES-88 1SBH103004R8871 NSL71ES-88 1SBH103004R8880 NSL80ES-88 1SBH136001R2022 NFZ22E-20 1SBH136001R2031 NFZ31E-20 1SBH136001R2039 NFZ33/11-20 1SBH136001R2040 NFZ40E-20 1SBH136001R2044 NFZ44E-20 1SBH136001R2053 NFZ53E-20 1SBH136001R2059 NFZ51/11-20 1SBH136001R2062 NFZ62E-20 1SBH136001R2071 NFZ71E-20 Type Page 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 6/22 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 4/63 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 6/23 5/305 5/305 5/309 5/305 5/309 5/309 5/309 5/309 5/309 Order code Type Page 1SBH136001R2080 NFZ80E-20 1SBH136001R2122 NFZ22E-21 1SBH136001R2131 NFZ31E-21 1SBH136001R2139 NFZ33/11-21 1SBH136001R2140 NFZ40E-21 1SBH136001R2144 NFZ44E-21 1SBH136001R2153 NFZ53E-21 1SBH136001R2159 NFZ51/11-21 1SBH136001R2162 NFZ62E-21 1SBH136001R2171 NFZ71E-21 1SBH136001R2180 NFZ80E-21 1SBH136001R2222 NFZ22E-22 1SBH136001R2231 NFZ31E-22 1SBH136001R2239 NFZ33/11-22 1SBH136001R2240 NFZ40E-22 1SBH136001R2244 NFZ44E-22 1SBH136001R2253 NFZ53E-22 1SBH136001R2259 NFZ51/11-22 1SBH136001R2262 NFZ62E-22 1SBH136001R2271 NFZ71E-22 1SBH136001R2280 NFZ80E-22 1SBH136001R2322 NFZ22E-23 1SBH136001R2331 NFZ31E-23 1SBH136001R2339 NFZ33/11-23 1SBH136001R2340 NFZ40E-23 1SBH136001R2344 NFZ44E-23 1SBH136001R2353 NFZ53E-23 1SBH136001R2359 NFZ51/11-23 1SBH136001R2362 NFZ62E-23 1SBH136001R2371 NFZ71E-23 1SBH136001R2380 NFZ80E-23 1SBH136004R2022 NFZ22ES-20 1SBH136004R2031 NFZ31ES-20 1SBH136004R2040 NFZ40ES-20 1SBH136004R2044 NFZ44ES-20 1SBH136004R2053 NFZ53ES-20 1SBH136004R2062 NFZ62ES-20 1SBH136004R2071 NFZ71ES-20 1SBH136004R2080 NFZ80ES-20 1SBH136004R2122 NFZ22ES-21 1SBH136004R2131 NFZ31ES-21 1SBH136004R2140 NFZ40ES-21 1SBH136004R2144 NFZ44ES-21 1SBH136004R2153 NFZ53ES-21 1SBH136004R2162 NFZ62ES-21 1SBH136004R2171 NFZ71ES-21 1SBH136004R2180 NFZ80ES-21 1SBH136004R2222 NFZ22ES-22 1SBH136004R2231 NFZ31ES-22 1SBH136004R2240 NFZ40ES-22 1SBH136004R2244 NFZ44ES-22 1SBH136004R2253 NFZ53ES-22 1SBH136004R2262 NFZ62ES-22 1SBH136004R2271 NFZ71ES-22 1SBH136004R2280 NFZ80ES-22 1SBH136004R2322 NFZ22ES-23 1SBH136004R2331 NFZ31ES-23 1SBH136004R2340 NFZ40ES-23 1SBH136004R2344 NFZ44ES-23 1SBH136004R2353 NFZ53ES-23 1SBH136004R2362 NFZ62ES-23 1SBH136004R2371 NFZ71ES-23 1SBH136004R2380 NFZ80ES-23 1SBH137001R1222 NF22E-12 1SBH137001R1231 NF31E-12 1SBH137001R1239 NF33/11-12 1SBH137001R1240 NF40E-12 1SBH137001R1244 NF44E-12 1SBH137001R1253 NF53E-12 1SBH137001R1259 NF51/11-12 1SBH137001R1262 NF62E-12 1SBH137001R1271 NF71E-12 1SBH137001R1280 NF80E-12 1SBH137001R1322 NF22E-13 1SBH137001R1331 NF31E-13 1SBH137001R1339 NF33/11-13 1SBH137001R1340 NF40E-13 1SBH137001R1344 NF44E-13 1SBH137001R1353 NF53E-13 1SBH137001R1359 NF51/11-13 1SBH137001R1362 NF62E-13 1SBH137001R1371 NF71E-13 1SBH137001R1380 NF80E-13 1SBH137001R1422 NF22E-14 1SBH137001R1431 NF31E-14 1SBH137001R1439 NF33/11-14 1SBH137001R1440 NF40E-14 1SBH137001R1444 NF44E-14 1SBH137001R1453 NF53E-14 1SBH137001R1459 NF51/11-14 5/309 5/305 5/305 5/309 5/305 5/309 5/309 5/309 5/309 5/309 5/309 5/305 5/305 5/309 5/305 5/309 5/309 5/309 5/309 5/309 5/309 5/305 5/305 5/309 5/305 5/309 5/309 5/309 5/309 5/309 5/309 6/69 6/69 6/69 6/71 6/71 6/71 6/71 6/71 6/69 6/69 6/69 6/71 6/71 6/71 6/71 6/71 6/69 6/69 6/69 6/71 6/71 6/71 6/71 6/71 6/69 6/69 6/69 6/71 6/71 6/71 6/71 6/71 5/304 5/304 5/308 5/304 5/308 5/308 5/308 5/308 5/308 5/308 5/304 5/304 5/308 5/304 5/308 5/308 5/308 5/308 5/308 5/308 5/304 5/304 5/308 5/304 5/308 5/308 5/308 ABB | 13/1 13 Index Order code Index Order code classification 13 Type 1SBH137001R1462 NF62E-14 1SBH137001R1471 NF71E-14 1SBH137001R1480 NF80E-14 1SBH137001R4122 NF22E-41 1SBH137001R4131 NF31E-41 1SBH137001R4139 NF33/11-41 1SBH137001R4140 NF40E-41 1SBH137001R4144 NF44E-41 1SBH137001R4153 NF53E-41 1SBH137001R4159 NF51/11-41 1SBH137001R4162 NF62E-41 1SBH137001R4171 NF71E-41 1SBH137001R4180 NF80E-41 1SBH137004R1222 NF22ES-12 1SBH137004R1231 NF31ES-12 1SBH137004R1240 NF40ES-12 1SBH137004R1244 NF44ES-12 1SBH137004R1253 NF53ES-12 1SBH137004R1262 NF62ES-12 1SBH137004R1271 NF71ES-12 1SBH137004R1280 NF80ES-12 1SBH137004R1322 NF22ES-13 1SBH137004R1331 NF31ES-13 1SBH137004R1340 NF40ES-13 1SBH137004R1344 NF44ES-13 1SBH137004R1353 NF53ES-13 1SBH137004R1362 NF62ES-13 1SBH137004R1371 NF71ES-13 1SBH137004R1380 NF80ES-13 1SBH137004R1422 NF22ES-14 1SBH137004R1431 NF31ES-14 1SBH137004R1440 NF40ES-14 1SBH137004R1444 NF44ES-14 1SBH137004R1453 NF53ES-14 1SBH137004R1462 NF62ES-14 1SBH137004R1471 NF71ES-14 1SBH137004R1480 NF80ES-14 1SBH137004R4122 NF22ES-41 1SBH137004R4131 NF31ES-41 1SBH137004R4140 NF40ES-41 1SBH137004R4144 NF44ES-41 1SBH137004R4153 NF53ES-41 1SBH137004R4162 NF62ES-41 1SBH137004R4171 NF71ES-41 1SBH137004R4180 NF80ES-41 1SBK103600M1600 VAS09EM-16M 1SBK103600M2000 VAS09EM-20M 1SBK103600M2600 VAS09EM-26M 1SBK103600M2800 VAS09EM-28M 1SBK103700M8100 VASL09EM-81M 1SBK103700M8300 VASL09EM-83M 1SBK103700M8600 VASL09EM-86M 1SBK103700M8800 VASL09EM-88M 1SBK103800M1600 VAS09SEM-16M 1SBK103800M2000 VAS09SEM-20M 1SBK103800M2600 VAS09SEM-26M 1SBK103800M2800 VAS09SEM-28M 1SBK103900M8100 VASL09SEM-81M 1SBK103900M8300 VASL09SEM-83M 1SBK103900M8600 VASL09SEM-86M 1SBK103900M8800 VASL09SEM-88M 1SBK104035R2800 DRAS09-28P 1SBK104035R2900 DRAS09-29P 1SBK104135R2600 DRAS09-26N 1SBK104135R2700 DRAS09-27N 1SBK104235R2000 DRAS09-20S 1SBK104335R8100 DRASL09-81S 1SBK104335R8300 DRASL09-83S 1SBK113600M1600 VAS12EM-16M 1SBK113600M2000 VAS12EM-20M 1SBK113600M2600 VAS12EM-26M 1SBK113600M2800 VAS12EM-28M 1SBK113700M8100 VASL12EM-81M 1SBK113700M8300 VASL12EM-83M 1SBK113700M8600 VASL12EM-86M 1SBK113700M8800 VASL12EM-88M 1SBK113800M1600 VAS12SEM-16M 1SBK113800M2000 VAS12SEM-20M 1SBK113800M2600 VAS12SEM-26M 1SBK113800M2800 VAS12SEM-28M 1SBK113900M8100 VASL12SEM-81M 1SBK113900M8300 VASL12SEM-83M 1SBK113900M8600 VASL12SEM-86M 1SBK113900M8800 VASL12SEM-88M 1SBK114035R2800 DRAS12-28P 1SBK114035R2900 DRAS12-29P 1SBK114135R2600 DRAS12-26N 1SBK114135R2700 DRAS12-27N 1SBK114235R2000 DRAS12-20S 1SBK114335R8100 DRASL12-81S 13/2 | ABB Page 5/308 5/308 5/308 5/304 5/304 5/308 5/304 5/308 5/308 5/308 5/308 5/308 5/308 6/68 6/68 6/68 6/70 6/70 6/70 6/70 6/70 6/68 6/68 6/68 6/70 6/70 6/70 6/70 6/70 6/68 6/68 6/68 6/70 6/70 6/70 6/70 6/70 6/68 6/68 6/68 6/70 6/70 6/70 6/70 6/70 4/46 4/46 4/46 4/46 4/47 4/47 4/47 4/47 4/46 4/46 4/46 4/46 4/47 4/47 4/47 4/47 8/2 8/2 8/2 8/2 8/2 8/2 8/2 4/46 4/46 4/46 4/46 4/47 4/47 4/47 4/47 4/46 4/46 4/46 4/46 4/47 4/47 4/47 4/47 8/2 8/2 8/2 8/2 8/2 8/2 Order code Type 1SBK114335R8300 DRASL12-83S 1SBK123600M1600 VAS16EM-16M 1SBK123600M2000 VAS16EM-20M 1SBK123600M2600 VAS16EM-26M 1SBK123600M2800 VAS16EM-28M 1SBK123700M8100 VASL16EM-81M 1SBK123700M8300 VASL16EM-83M 1SBK123700M8600 VASL16EM-86M 1SBK123700M8800 VASL16EM-88M 1SBK123800M1600 VAS16SEM-16M 1SBK123800M2000 VAS16SEM-20M 1SBK123800M2600 VAS16SEM-26M 1SBK123800M2800 VAS16SEM-28M 1SBK123900M8100 VASL16SEM-81M 1SBK123900M8300 VASL16SEM-83M 1SBK123900M8600 VASL16SEM-86M 1SBK123900M8800 VASL16SEM-88M 1SBK124035R2800 DRAS16-28P 1SBK124035R2900 DRAS16-29P 1SBK124135R2600 DRAS16-26N 1SBK124135R2700 DRAS16-27N 1SBK124235R2000 DRAS16-20S 1SBK124335R8100 DRASL16-81S 1SBK124335R8300 DRASL16-83S 1SBL101001R1601 AS09-30-01-16 1SBL101001R1610 AS09-30-10-16 1SBL101001R1632 AS09-30-32-16 1SBL101001R2001 AS09-30-01-20 1SBL101001R2010 AS09-30-10-20 1SBL101001R2032 AS09-30-32-20 1SBL101001R2601 AS09-30-01-26 1SBL101001R2610 AS09-30-10-26 1SBL101001R2632 AS09-30-32-26 1SBL101001R2801 AS09-30-01-28 1SBL101001R2810 AS09-30-10-28 1SBL101001R2832 AS09-30-32-28 1SBL101004R1601 AS09-30-01S-16 1SBL101004R1610 AS09-30-10S-16 1SBL101004R1632 AS09-30-32S-16 1SBL101004R2001 AS09-30-01S-20 1SBL101004R2010 AS09-30-10S-20 1SBL101004R2032 AS09-30-32S-20 1SBL101004R2601 AS09-30-01S-26 1SBL101004R2610 AS09-30-10S-26 1SBL101004R2632 AS09-30-32S-26 1SBL101004R2801 AS09-30-01S-28 1SBL101004R2810 AS09-30-10S-28 1SBL101004R2832 AS09-30-32S-28 1SBL103001R8101 ASL09-30-01-81 1SBL103001R8110 ASL09-30-10-81 1SBL103001R8132 ASL09-30-32-81 1SBL103001R8301 ASL09-30-01-83 1SBL103001R8310 ASL09-30-10-83 1SBL103001R8332 ASL09-30-32-83 1SBL103001R8601 ASL09-30-01-86 1SBL103001R8610 ASL09-30-10-86 1SBL103001R8632 ASL09-30-32-86 1SBL103001R8801 ASL09-30-01-88 1SBL103001R8810 ASL09-30-10-88 1SBL103001R8832 ASL09-30-32-88 1SBL103004R8101 ASL09-30-01S-81 1SBL103004R8110 ASL09-30-10S-81 1SBL103004R8132 ASL09-30-32S-81 1SBL103004R8301 ASL09-30-01S-83 1SBL103004R8310 ASL09-30-10S-83 1SBL103004R8332 ASL09-30-32S-83 1SBL103004R8601 ASL09-30-01S-86 1SBL103004R8610 ASL09-30-10S-86 1SBL103004R8632 ASL09-30-32S-86 1SBL103004R8801 ASL09-30-01S-88 1SBL103004R8810 ASL09-30-10S-88 1SBL103004R8832 ASL09-30-32S-88 1SBL111001R1601 AS12-30-01-16 1SBL111001R1610 AS12-30-10-16 1SBL111001R1632 AS12-30-32-16 1SBL111001R2001 AS12-30-01-20 1SBL111001R2010 AS12-30-10-20 1SBL111001R2032 AS12-30-32-20 1SBL111001R2601 AS12-30-01-26 1SBL111001R2610 AS12-30-10-26 1SBL111001R2632 AS12-30-32-26 1SBL111001R2801 AS12-30-01-28 1SBL111001R2810 AS12-30-10-28 1SBL111001R2832 AS12-30-32-28 1SBL111004R1601 AS12-30-01S-16 1SBL111004R1610 AS12-30-10S-16 1SBL111004R1632 AS12-30-32S-16 1SBL111004R2001 AS12-30-01S-20 1SBL111004R2010 AS12-30-10S-20 1SBL111004R2032 AS12-30-32S-20 Page Order code 8/2 4/46 4/46 4/46 4/46 4/47 4/47 4/47 4/47 4/46 4/46 4/46 4/46 4/47 4/47 4/47 4/47 8/2 8/2 8/2 8/2 8/2 8/2 8/2 4/32 4/32 4/34 4/32 4/32 4/34 4/32 4/32 4/34 4/32 4/32 4/34 6/4 6/4 6/6 6/4 6/4 6/6 6/4 6/4 6/6 6/4 6/4 6/6 4/33 4/33 4/35 4/33 4/33 4/35 4/33 4/33 4/35 4/33 4/33 4/35 6/5 6/5 6/7 6/5 6/5 6/7 6/5 6/5 6/7 6/5 6/5 6/7 4/32 4/32 4/34 4/32 4/32 4/34 4/32 4/32 4/34 4/32 4/32 4/34 6/4 6/4 6/6 6/4 6/4 6/6 1SBL111004R2601 AS12-30-01S-26 6/4 1SBL111004R2610 AS12-30-10S-26 6/4 1SBL111004R2632 AS12-30-32S-26 6/6 1SBL111004R2801 AS12-30-01S-28 6/4 1SBL111004R2810 AS12-30-10S-28 6/4 1SBL111004R2832 AS12-30-32S-28 6/6 1SBL113001R8101 ASL12-30-01-81 4/33 1SBL113001R8110 ASL12-30-10-81 4/33 1SBL113001R8132 ASL12-30-32-81 4/35 1SBL113001R8301 ASL12-30-01-83 4/33 1SBL113001R8310 ASL12-30-10-83 4/33 1SBL113001R8332 ASL12-30-32-83 4/35 1SBL113001R8601 ASL12-30-01-86 4/33 1SBL113001R8610 ASL12-30-10-86 4/33 1SBL113001R8632 ASL12-30-32-86 4/35 1SBL113001R8801 ASL12-30-01-88 4/33 1SBL113001R8810 ASL12-30-10-88 4/33 1SBL113001R8832 ASL12-30-32-88 4/35 1SBL113004R8101 ASL12-30-01S-81 6/5 1SBL113004R8110 ASL12-30-10S-81 6/5 1SBL113004R8132 ASL12-30-32S-81 6/7 1SBL113004R8301 ASL12-30-01S-83 6/5 1SBL113004R8310 ASL12-30-10S-83 6/5 1SBL113004R8332 ASL12-30-32S-83 6/7 1SBL113004R8601 ASL12-30-01S-86 6/5 1SBL113004R8610 ASL12-30-10S-86 6/5 1SBL113004R8632 ASL12-30-32S-86 6/7 1SBL113004R8801 ASL12-30-01S-88 6/5 1SBL113004R8810 ASL12-30-10S-88 6/5 1SBL113004R8832 ASL12-30-32S-88 6/7 1SBL121001R1601 AS16-30-01-16 4/32 1SBL121001R1610 AS16-30-10-16 4/32 1SBL121001R1632 AS16-30-32-16 4/34 1SBL121001R2001 AS16-30-01-20 4/32 1SBL121001R2010 AS16-30-10-20 4/32 1SBL121001R2032 AS16-30-32-20 4/34 1SBL121001R2601 AS16-30-01-26 4/32 1SBL121001R2610 AS16-30-10-26 4/32 1SBL121001R2632 AS16-30-32-26 4/34 1SBL121001R2801 AS16-30-01-28 4/32 1SBL121001R2810 AS16-30-10-28 4/32 1SBL121001R2832 AS16-30-32-28 4/34 1SBL121004R1601 AS16-30-01S-16 6/4 1SBL121004R1610 AS16-30-10S-16 6/4 1SBL121004R1632 AS16-30-32S-16 6/6 1SBL121004R2001 AS16-30-01S-20 6/4 1SBL121004R2010 AS16-30-10S-20 6/4 1SBL121004R2032 AS16-30-32S-20 6/6 1SBL121004R2601 AS16-30-01S-26 6/4 1SBL121004R2610 AS16-30-10S-26 6/4 1SBL121004R2632 AS16-30-32S-26 6/6 1SBL121004R2801 AS16-30-01S-28 6/4 1SBL121004R2810 AS16-30-10S-28 6/4 1SBL121004R2832 AS16-30-32S-28 6/6 1SBL123001R8101 ASL16-30-01-81 4/33 1SBL123001R8110 ASL16-30-10-81 4/33 1SBL123001R8132 ASL16-30-32-81 4/35 1SBL123001R8301 ASL16-30-01-83 4/33 1SBL123001R8310 ASL16-30-10-83 4/33 1SBL123001R8332 ASL16-30-32-83 4/35 1SBL123001R8601 ASL16-30-01-86 4/33 1SBL123001R8610 ASL16-30-10-86 4/33 1SBL123001R8632 ASL16-30-32-86 4/35 1SBL123001R8801 ASL16-30-01-88 4/33 1SBL123001R8810 ASL16-30-10-88 4/33 1SBL123001R8832 ASL16-30-32-88 4/35 1SBL123004R8101 ASL16-30-01S-81 6/5 1SBL123004R8110 ASL16-30-10S-81 6/5 1SBL123004R8132 ASL16-30-32S-81 6/7 1SBL123004R8301 ASL16-30-01S-83 6/5 1SBL123004R8310 ASL16-30-10S-83 6/5 1SBL123004R8332 ASL16-30-32S-83 6/7 1SBL123004R8601 ASL16-30-01S-86 6/5 1SBL123004R8610 ASL16-30-10S-86 6/5 1SBL123004R8632 ASL16-30-32S-86 6/7 1SBL123004R8801 ASL16-30-01S-88 6/5 1SBL123004R8810 ASL16-30-10S-88 6/5 1SBL123004R8832 ASL16-30-32S-88 6/7 1SBL136001R2022 AF09Z-30-22-20 5/105 1SBL136001R2122 AF09Z-30-22-21 5/105 1SBL136001R2222 AF09Z-30-22-22 5/105 1SBL136001R2322 AF09Z-30-22-23 5/105 1SBL136004R2001 AF09Z-30-01S-20 6/47 1SBL136004R2010 AF09Z-30-10S-20 6/47 1SBL136004R2022 AF09Z-30-22S-20 6/49 1SBL136004R2101 AF09Z-30-01S-21 6/47 1SBL136004R2110 AF09Z-30-10S-21 6/47 1SBL136004R2122 AF09Z-30-22S-21 6/49 1SBL136004R2201 AF09Z-30-01S-22 6/47 1SBL136004R2210 AF09Z-30-10S-22 6/47 Type Page Index Order code Index Order code classification Type Page 1SBL136004R2222 AF09Z-30-22S-22 6/49 1SBL136004R2301 AF09Z-30-01S-23 6/47 1SBL136004R2310 AF09Z-30-10S-23 6/47 1SBL136004R2322 AF09Z-30-22S-23 6/49 1SBL136201R2000 AF09Z-40-00-20 5/183 1SBL136201R2100 AF09Z-40-00-21 5/183 1SBL136201R2200 AF09Z-40-00-22 5/183 1SBL136201R2300 AF09Z-40-00-23 5/183 1SBL136501R2000 AF09Z-22-00-20 5/183 1SBL136501R2100 AF09Z-22-00-21 5/183 1SBL136501R2200 AF09Z-22-00-22 5/183 1SBL136501R2300 AF09Z-22-00-23 5/183 1SBL137001R1201 AF09-30-01-12 5/82 1SBL137001R1210 AF09-30-10-12 5/82 1SBL137001R1222 AF09-30-22-12 5/104 1SBL137001R1301 AF09-30-01-13 5/82 1SBL137001R1310 AF09-30-10-13 5/82 1SBL137001R1322 AF09-30-22-13 5/104 1SBL137001R1401 AF09-30-01-14 5/82 1SBL137001R1410 AF09-30-10-14 5/82 1SBL137001R1422 AF09-30-22-14 5/104 1SBL137001R4101 AF09-30-01-41 5/82 1SBL137001R4110 AF09-30-10-41 5/82 1SBL137001R4122 AF09-30-22-41 5/104 1SBL137004R1201 AF09-30-01S-12 6/46 1SBL137004R1210 AF09-30-10S-12 6/46 1SBL137004R1222 AF09-30-22S-12 6/48 1SBL137004R1301 AF09-30-01S-13 6/46 1SBL137004R1310 AF09-30-10S-13 6/46 1SBL137004R1322 AF09-30-22S-13 6/48 1SBL137004R1401 AF09-30-01S-14 6/46 1SBL137004R1410 AF09-30-10S-14 6/46 1SBL137004R1422 AF09-30-22S-14 6/48 1SBL137004R4101 AF09-30-01S-41 6/46 1SBL137004R4110 AF09-30-10S-41 6/46 1SBL137004R4122 AF09-30-22S-41 6/48 1SBL137201R1200 AF09-40-00-12 5/182 1SBL137201R1300 AF09-40-00-13 5/182 1SBL137201R1400 AF09-40-00-14 5/182 1SBL137201R4100 AF09-40-00-41 5/182 1SBL137501R1200 AF09-22-00-12 5/182 1SBL137501R1300 AF09-22-00-13 5/182 1SBL137501R1400 AF09-22-00-14 5/182 1SBL137501R4100 AF09-22-00-41 5/182 1SBL156001R2022 AF12Z-30-22-20 5/105 1SBL156001R2122 AF12Z-30-22-21 5/105 1SBL156001R2222 AF12Z-30-22-22 5/105 1SBL156001R2322 AF12Z-30-22-23 5/105 1SBL156004R2001 AF12Z-30-01S-20 6/47 1SBL156004R2010 AF12Z-30-10S-20 6/47 1SBL156004R2022 AF12Z-30-22S-20 6/49 1SBL156004R2101 AF12Z-30-01S-21 6/47 1SBL156004R2110 AF12Z-30-10S-21 6/47 1SBL156004R2122 AF12Z-30-22S-21 6/49 1SBL156004R2201 AF12Z-30-01S-22 6/47 1SBL156004R2210 AF12Z-30-10S-22 6/47 1SBL156004R2222 AF12Z-30-22S-22 6/49 1SBL156004R2301 AF12Z-30-01S-23 6/47 1SBL156004R2310 AF12Z-30-10S-23 6/47 1SBL156004R2322 AF12Z-30-22S-23 6/49 1SBL157001R1201 AF12-30-01-12 5/82 1SBL157001R1210 AF12-30-10-12 5/82 1SBL157001R1222 AF12-30-22-12 5/104 1SBL157001R1301 AF12-30-01-13 5/82 1SBL157001R1310 AF12-30-10-13 5/82 1SBL157001R1322 AF12-30-22-13 5/104 1SBL157001R1401 AF12-30-01-14 5/82 1SBL157001R1410 AF12-30-10-14 5/82 1SBL157001R1422 AF12-30-22-14 5/104 1SBL157001R4101 AF12-30-01-41 5/82 1SBL157001R4110 AF12-30-10-41 5/82 1SBL157001R4122 AF12-30-22-41 5/104 1SBL157004R1201 AF12-30-01S-12 6/46 1SBL157004R1210 AF12-30-10S-12 6/46 1SBL157004R1222 AF12-30-22S-12 6/48 1SBL157004R1301 AF12-30-01S-13 6/46 1SBL157004R1310 AF12-30-10S-13 6/46 1SBL157004R1322 AF12-30-22S-13 6/48 1SBL157004R1401 AF12-30-01S-14 6/46 1SBL157004R1410 AF12-30-10S-14 6/46 1SBL157004R1422 AF12-30-22S-14 6/48 1SBL157004R4101 AF12-30-01S-41 6/46 1SBL157004R4110 AF12-30-10S-41 6/46 1SBL157004R4122 AF12-30-22S-41 6/48 1SBL176001R2022 AF16Z-30-22-20 5/105 1SBL176001R2122 AF16Z-30-22-21 5/105 1SBL176001R2222 AF16Z-30-22-22 5/105 1SBL176001R2322 AF16Z-30-22-23 5/105 1SBL176004R2001 AF16Z-30-01S-20 6/47 1SBL176004R2010 AF16Z-30-10S-20 6/47 Order code Type Page 1SBL176004R2022 AF16Z-30-22S-20 6/49 1SBL176004R2101 AF16Z-30-01S-21 6/47 1SBL176004R2110 AF16Z-30-10S-21 6/47 1SBL176004R2122 AF16Z-30-22S-21 6/49 1SBL176004R2201 AF16Z-30-01S-22 6/47 1SBL176004R2210 AF16Z-30-10S-22 6/47 1SBL176004R2222 AF16Z-30-22S-22 6/49 1SBL176004R2301 AF16Z-30-01S-23 6/47 1SBL176004R2310 AF16Z-30-10S-23 6/47 1SBL176004R2322 AF16Z-30-22S-23 6/49 1SBL176201R2000 AF16Z-40-00-20 5/183 1SBL176201R2100 AF16Z-40-00-21 5/183 1SBL176201R2200 AF16Z-40-00-22 5/183 1SBL176201R2300 AF16Z-40-00-23 5/183 1SBL176501R2000 AF16Z-22-00-20 5/183 1SBL176501R2100 AF16Z-22-00-21 5/183 1SBL176501R2200 AF16Z-22-00-22 5/183 1SBL176501R2300 AF16Z-22-00-23 5/183 1SBL177001R1201 AF16-30-01-12 5/82 1SBL177001R1210 AF16-30-10-12 5/82 1SBL177001R1222 AF16-30-22-12 5/104 1SBL177001R1301 AF16-30-01-13 5/82 1SBL177001R1310 AF16-30-10-13 5/82 1SBL177001R1322 AF16-30-22-13 5/104 1SBL177001R1401 AF16-30-01-14 5/82 1SBL177001R1410 AF16-30-10-14 5/82 1SBL177001R1422 AF16-30-22-14 5/104 1SBL177001R4101 AF16-30-01-41 5/82 1SBL177001R4110 AF16-30-10-41 5/82 1SBL177001R4122 AF16-30-22-41 5/104 1SBL177004R1201 AF16-30-01S-12 6/46 1SBL177004R1210 AF16-30-10S-12 6/46 1SBL177004R1222 AF16-30-22S-12 6/48 1SBL177004R1301 AF16-30-01S-13 6/46 1SBL177004R1310 AF16-30-10S-13 6/46 1SBL177004R1322 AF16-30-22S-13 6/48 1SBL177004R1401 AF16-30-01S-14 6/46 1SBL177004R1410 AF16-30-10S-14 6/46 1SBL177004R1422 AF16-30-22S-14 6/48 1SBL177004R4101 AF16-30-01S-41 6/46 1SBL177004R4110 AF16-30-10S-41 6/46 1SBL177004R4122 AF16-30-22S-41 6/48 1SBL177201R1200 AF16-40-00-12 5/182 1SBL177201R1300 AF16-40-00-13 5/182 1SBL177201R1400 AF16-40-00-14 5/182 1SBL177201R4100 AF16-40-00-41 5/182 1SBL177501R1200 AF16-22-00-12 5/182 1SBL177501R1300 AF16-22-00-13 5/182 1SBL177501R1400 AF16-22-00-14 5/182 1SBL177501R4100 AF16-22-00-41 5/182 1SBL181022R8010 UA16-30-10 5/276 1SBL181022R8110 UA16-30-10 5/276 1SBL181022R8310 UA16-30-10 5/276 1SBL181022R8410 UA16-30-10 5/276 1SBL181022R8510 UA16-30-10 5/276 1SBL181022R8610 UA16-30-10 5/276 1SBL181022R8810 UA16-30-10 5/276 1SBL181024R8010 UA16-30-10RA 5/266 1SBL181024R8110 UA16-30-10RA 5/266 1SBL181024R8310 UA16-30-10RA 5/266 1SBL181024R8410 UA16-30-10RA 5/266 1SBL181024R8510 UA16-30-10RA 5/266 1SBL181024R8610 UA16-30-10RA 5/266 1SBL181024R8810 UA16-30-10RA 5/266 1SBL236001R2011 AF26Z-30-11-20 5/105 1SBL236001R2022 AF26Z-30-22-20 5/105 1SBL236001R2111 AF26Z-30-11-21 5/105 1SBL236001R2122 AF26Z-30-22-21 5/105 1SBL236001R2211 AF26Z-30-11-22 5/105 1SBL236001R2222 AF26Z-30-22-22 5/105 1SBL236001R2311 AF26Z-30-11-23 5/105 1SBL236001R2322 AF26Z-30-22-23 5/105 1SBL236004R2000 AF26Z-30-00S-20 6/47 1SBL236004R2011 AF26Z-30-11S-20 6/49 1SBL236004R2022 AF26Z-30-22S-20 6/49 1SBL236004R2100 AF26Z-30-00S-21 6/47 1SBL236004R2111 AF26Z-30-11S-21 6/49 1SBL236004R2122 AF26Z-30-22S-21 6/49 1SBL236004R2200 AF26Z-30-00S-22 6/47 1SBL236004R2211 AF26Z-30-11S-22 6/49 1SBL236004R2222 AF26Z-30-22S-22 6/49 1SBL236004R2300 AF26Z-30-00S-23 6/47 1SBL236004R2311 AF26Z-30-11S-23 6/49 1SBL236004R2322 AF26Z-30-22S-23 6/49 1SBL236201R2000 AF26Z-40-00-20 5/183 1SBL236201R2100 AF26Z-40-00-21 5/183 1SBL236201R2200 AF26Z-40-00-22 5/183 1SBL236201R2300 AF26Z-40-00-23 5/183 1SBL236501R2000 AF26Z-22-00-20 5/183 1SBL236501R2100 AF26Z-22-00-21 5/183 Order code Type Page 1SBL236501R2200 AF26Z-22-00-22 1SBL236501R2300 AF26Z-22-00-23 1SBL237001R1200 AF26-30-00-12 1SBL237001R1211 AF26-30-11-12 1SBL237001R1222 AF26-30-22-12 1SBL237001R1300 AF26-30-00-13 1SBL237001R1311 AF26-30-11-13 1SBL237001R1322 AF26-30-22-13 1SBL237001R1400 AF26-30-00-14 1SBL237001R1411 AF26-30-11-14 1SBL237001R1422 AF26-30-22-14 1SBL237001R4100 AF26-30-00-41 1SBL237001R4111 AF26-30-11-41 1SBL237001R4122 AF26-30-22-41 1SBL237004R1200 AF26-30-00S-12 1SBL237004R1211 AF26-30-11S-12 1SBL237004R1222 AF26-30-22S-12 1SBL237004R1300 AF26-30-00S-13 1SBL237004R1311 AF26-30-11S-13 1SBL237004R1322 AF26-30-22S-13 1SBL237004R1400 AF26-30-00S-14 1SBL237004R1411 AF26-30-11S-14 1SBL237004R1422 AF26-30-22S-14 1SBL237004R4100 AF26-30-00S-41 1SBL237004R4111 AF26-30-11S-41 1SBL237004R4122 AF26-30-22S-41 1SBL237201R1200 AF26-40-00-12 1SBL237201R1300 AF26-40-00-13 1SBL237201R1400 AF26-40-00-14 1SBL237201R4100 AF26-40-00-41 1SBL237501R1200 AF26-22-00-12 1SBL237501R1300 AF26-22-00-13 1SBL237501R1400 AF26-22-00-14 1SBL237501R4100 AF26-22-00-41 1SBL241022R8010 UA26-30-10 1SBL241022R8110 UA26-30-10 1SBL241022R8310 UA26-30-10 1SBL241022R8410 UA26-30-10 1SBL241022R8510 UA26-30-10 1SBL241022R8610 UA26-30-10 1SBL241022R8810 UA26-30-10 1SBL241024R8010 UA26-30-10RA 1SBL241024R8110 UA26-30-10RA 1SBL241024R8310 UA26-30-10RA 1SBL241024R8410 UA26-30-10RA 1SBL241024R8510 UA26-30-10RA 1SBL241024R8610 UA26-30-10RA 1SBL241024R8810 UA26-30-10RA 1SBL276001R2011 AF30Z-30-11-20 1SBL276001R2022 AF30Z-30-22-20 1SBL276001R2111 AF30Z-30-11-21 1SBL276001R2122 AF30Z-30-22-21 1SBL276001R2211 AF30Z-30-11-22 1SBL276001R2222 AF30Z-30-22-22 1SBL276001R2311 AF30Z-30-11-23 1SBL276001R2322 AF30Z-30-22-23 1SBL277001R1200 AF30-30-00-12 1SBL277001R1211 AF30-30-11-12 1SBL277001R1222 AF30-30-22-12 1SBL277001R1300 AF30-30-00-13 1SBL277001R1311 AF30-30-11-13 1SBL277001R1322 AF30-30-22-13 1SBL277001R1400 AF30-30-00-14 1SBL277001R1411 AF30-30-11-14 1SBL277001R1422 AF30-30-22-14 1SBL277001R4100 AF30-30-00-41 1SBL277001R4111 AF30-30-11-41 1SBL277001R4122 AF30-30-22-41 1SBL281022R8010 UA30-30-10 1SBL281022R8110 UA30-30-10 1SBL281022R8310 UA30-30-10 1SBL281022R8410 UA30-30-10 1SBL281022R8510 UA30-30-10 1SBL281022R8610 UA30-30-10 1SBL281022R8810 UA30-30-10 1SBL281024R8010 UA30-30-10RA 1SBL281024R8110 UA30-30-10RA 1SBL281024R8310 UA30-30-10RA 1SBL281024R8410 UA30-30-10RA 1SBL281024R8510 UA30-30-10RA 1SBL281024R8610 UA30-30-10RA 1SBL281024R8810 UA30-30-10RA 1SBL296001R2011 AF38Z-30-11-20 1SBL296001R2022 AF38Z-30-22-20 1SBL296001R2111 AF38Z-30-11-21 1SBL296001R2122 AF38Z-30-22-21 1SBL296001R2211 AF38Z-30-11-22 1SBL296001R2222 AF38Z-30-22-22 1SBL296001R2311 AF38Z-30-11-23 1SBL296001R2322 AF38Z-30-22-23 5/183 5/183 5/82 5/104 5/104 5/82 5/104 5/104 5/82 5/104 5/104 5/82 5/104 5/104 6/46 6/48 6/48 6/46 6/48 6/48 6/46 6/48 6/48 6/46 6/48 6/48 5/182 5/182 5/182 5/182 5/182 5/182 5/182 5/182 5/276 5/276 5/276 5/276 5/276 5/276 5/276 5/266 5/266 5/266 5/266 5/266 5/266 5/266 5/105 5/105 5/105 5/105 5/105 5/105 5/105 5/105 5/82 5/104 5/104 5/82 5/104 5/104 5/82 5/104 5/104 5/82 5/104 5/104 5/276 5/276 5/276 5/276 5/276 5/276 5/276 5/266 5/266 5/266 5/266 5/266 5/266 5/266 5/105 5/105 5/105 5/105 5/105 5/105 5/105 5/105 ABB | 13/3 13 Index Order code Index Order code classification 13 Type 1SBL296201R2000 AF38Z-40-00-20 1SBL296201R2100 AF38Z-40-00-21 1SBL296201R2200 AF38Z-40-00-22 1SBL296201R2300 AF38Z-40-00-23 1SBL296501R2000 AF38Z-22-00-20 1SBL296501R2100 AF38Z-22-00-21 1SBL296501R2200 AF38Z-22-00-22 1SBL296501R2300 AF38Z-22-00-23 1SBL297001R1200 AF38-30-00-12 1SBL297001R1211 AF38-30-11-12 1SBL297001R1222 AF38-30-22-12 1SBL297001R1300 AF38-30-00-13 1SBL297001R1311 AF38-30-11-13 1SBL297001R1322 AF38-30-22-13 1SBL297001R1400 AF38-30-00-14 1SBL297001R1411 AF38-30-11-14 1SBL297001R1422 AF38-30-22-14 1SBL297001R4100 AF38-30-00-41 1SBL297001R4111 AF38-30-11-41 1SBL297001R4122 AF38-30-22-41 1SBL297201R1200 AF38-40-00-12 1SBL297201R1300 AF38-40-00-13 1SBL297201R1400 AF38-40-00-14 1SBL297201R4100 AF38-40-00-41 1SBL297501R1200 AF38-22-00-12 1SBL297501R1300 AF38-22-00-13 1SBL297501R1400 AF38-22-00-14 1SBL297501R4100 AF38-22-00-41 1SBL347001R1100 AF40-30-00-11 1SBL347001R1111 AF40-30-11-11 1SBL347001R1122 AF40-30-22-11 1SBL347001R1200 AF40-30-00-12 1SBL347001R1211 AF40-30-11-12 1SBL347001R1222 AF40-30-22-12 1SBL347001R1300 AF40-30-00-13 1SBL347001R1311 AF40-30-11-13 1SBL347001R1322 AF40-30-22-13 1SBL347001R1400 AF40-30-00-14 1SBL347001R1411 AF40-30-11-14 1SBL347001R1422 AF40-30-22-14 1SBL347001R4100 AF40-30-00-41 1SBL347001R4111 AF40-30-11-41 1SBL347001R4122 AF40-30-22-41 1SBL347201R1100 AF40-40-00-11 1SBL347201R1200 AF40-40-00-12 1SBL347201R1300 AF40-40-00-13 1SBL347201R1400 AF40-40-00-14 1SBL347201R4100 AF40-40-00-41 1SBL347501R1100 AF40-22-00-11 1SBL347501R1200 AF40-22-00-12 1SBL347501R1300 AF40-22-00-13 1SBL347501R1400 AF40-22-00-14 1SBL347501R4100 AF40-22-00-41 1SBL351022R8000 UA50-30-00 1SBL351022R8011 UA50-30-11 1SBL351022R8100 UA50-30-00 1SBL351022R8111 UA50-30-11 1SBL351022R8300 UA50-30-00 1SBL351022R8311 UA50-30-11 1SBL351022R8400 UA50-30-00 1SBL351022R8411 UA50-30-11 1SBL351022R8500 UA50-30-00 1SBL351022R8511 UA50-30-11 1SBL351022R8600 UA50-30-00 1SBL351022R8611 UA50-30-11 1SBL351022R8800 UA50-30-00 1SBL351022R8811 UA50-30-11 1SBL351024R8000 UA50-30-00RA 1SBL351024R8100 UA50-30-00RA 1SBL351024R8300 UA50-30-00RA 1SBL351024R8400 UA50-30-00RA 1SBL351024R8500 UA50-30-00RA 1SBL351024R8600 UA50-30-00RA 1SBL351024R8800 UA50-30-00RA 1SBL367001R1100 AF52-30-00-11 1SBL367001R1111 AF52-30-11-11 1SBL367001R1122 AF52-30-22-11 1SBL367001R1200 AF52-30-00-12 1SBL367001R1211 AF52-30-11-12 1SBL367001R1222 AF52-30-22-12 1SBL367001R1300 AF52-30-00-13 1SBL367001R1311 AF52-30-11-13 1SBL367001R1322 AF52-30-22-13 1SBL367001R1400 AF52-30-00-14 1SBL367001R1411 AF52-30-11-14 1SBL367001R1422 AF52-30-22-14 1SBL367001R4100 AF52-30-00-41 1SBL367001R4111 AF52-30-11-41 1SBL367001R4122 AF52-30-22-41 1SBL367201R1100 AF52-40-00-11 13/4 | ABB Page 5/183 5/183 5/183 5/183 5/183 5/183 5/183 5/183 5/82 5/104 5/104 5/82 5/104 5/104 5/82 5/104 5/104 5/82 5/104 5/104 5/182 5/182 5/182 5/182 5/182 5/182 5/182 5/182 5/84 5/106 5/106 5/84 5/106 5/106 5/84 5/106 5/106 5/84 5/106 5/106 5/84 5/106 5/106 5/184 5/184 5/184 5/184 5/184 5/184 5/184 5/184 5/184 5/184 5/277 5/278 5/277 5/278 5/277 5/278 5/277 5/278 5/277 5/278 5/277 5/278 5/277 5/278 5/267 5/267 5/267 5/267 5/267 5/267 5/267 5/84 5/106 5/106 5/84 5/106 5/106 5/84 5/106 5/106 5/84 5/106 5/106 5/84 5/106 5/106 5/184 Order code Type 1SBL367201R1200 AF52-40-00-12 1SBL367201R1300 AF52-40-00-13 1SBL367201R1400 AF52-40-00-14 1SBL367201R4100 AF52-40-00-41 1SBL371022R8000 UA63-30-00 1SBL371022R8011 UA63-30-11 1SBL371022R8100 UA63-30-00 1SBL371022R8111 UA63-30-11 1SBL371022R8300 UA63-30-00 1SBL371022R8311 UA63-30-11 1SBL371022R8400 UA63-30-00 1SBL371022R8411 UA63-30-11 1SBL371022R8500 UA63-30-00 1SBL371022R8511 UA63-30-11 1SBL371022R8600 UA63-30-00 1SBL371022R8611 UA63-30-11 1SBL371022R8800 UA63-30-00 1SBL371022R8811 UA63-30-11 1SBL371024R8000 UA63-30-00RA 1SBL371024R8100 UA63-30-00RA 1SBL371024R8300 UA63-30-00RA 1SBL371024R8400 UA63-30-00RA 1SBL371024R8500 UA63-30-00RA 1SBL371024R8600 UA63-30-00RA 1SBL371024R8800 UA63-30-00RA 1SBL387001R1100 AF65-30-00-11 1SBL387001R1111 AF65-30-11-11 1SBL387001R1122 AF65-30-22-11 1SBL387001R1200 AF65-30-00-12 1SBL387001R1211 AF65-30-11-12 1SBL387001R1222 AF65-30-22-12 1SBL387001R1300 AF65-30-00-13 1SBL387001R1311 AF65-30-11-13 1SBL387001R1322 AF65-30-22-13 1SBL387001R1400 AF65-30-00-14 1SBL387001R1411 AF65-30-11-14 1SBL387001R1422 AF65-30-22-14 1SBL387001R4100 AF65-30-00-41 1SBL387001R4111 AF65-30-11-41 1SBL387001R4122 AF65-30-22-41 1SBL397001R1100 AF80-30-00-11 1SBL397001R1111 AF80-30-11-11 1SBL397001R1122 AF80-30-22-11 1SBL397001R1200 AF80-30-00-12 1SBL397001R1211 AF80-30-11-12 1SBL397001R1222 AF80-30-22-12 1SBL397001R1300 AF80-30-00-13 1SBL397001R1311 AF80-30-11-13 1SBL397001R1322 AF80-30-22-13 1SBL397001R1400 AF80-30-00-14 1SBL397001R1411 AF80-30-11-14 1SBL397001R1422 AF80-30-22-14 1SBL397001R4100 AF80-30-00-41 1SBL397001R4111 AF80-30-11-41 1SBL397001R4122 AF80-30-22-41 1SBL397201R1100 AF80-40-00-11 1SBL397201R1200 AF80-40-00-12 1SBL397201R1300 AF80-40-00-13 1SBL397201R1400 AF80-40-00-14 1SBL397201R4100 AF80-40-00-41 1SBL397501R1100 AF80-22-00-11 1SBL397501R1200 AF80-22-00-12 1SBL397501R1300 AF80-22-00-13 1SBL397501R1400 AF80-22-00-14 1SBL397501R4100 AF80-22-00-41 1SBL407001R1100 AF96-30-00-11 1SBL407001R1111 AF96-30-11-11 1SBL407001R1122 AF96-30-22-11 1SBL407001R1200 AF96-30-00-12 1SBL407001R1211 AF96-30-11-12 1SBL407001R1222 AF96-30-22-12 1SBL407001R1300 AF96-30-00-13 1SBL407001R1311 AF96-30-11-13 1SBL407001R1322 AF96-30-22-13 1SBL407001R1400 AF96-30-00-14 1SBL407001R1411 AF96-30-11-14 1SBL407001R1422 AF96-30-22-14 1SBL407001R4100 AF96-30-00-41 1SBL407001R4111 AF96-30-11-41 1SBL407001R4122 AF96-30-22-41 1SBL411022R8000 UA75-30-00 1SBL411022R8011 UA75-30-11 1SBL411022R8100 UA75-30-00 1SBL411022R8111 UA75-30-11 1SBL411022R8300 UA75-30-00 1SBL411022R8311 UA75-30-11 1SBL411022R8400 UA75-30-00 1SBL411022R8411 UA75-30-11 1SBL411022R8500 UA75-30-00 1SBL411022R8511 UA75-30-11 Page 5/184 5/184 5/184 5/184 5/277 5/278 5/277 5/278 5/277 5/278 5/277 5/278 5/277 5/278 5/277 5/278 5/277 5/278 5/267 5/267 5/267 5/267 5/267 5/267 5/267 5/84 5/106 5/106 5/84 5/106 5/106 5/84 5/106 5/106 5/84 5/106 5/106 5/84 5/106 5/106 5/84 5/107 5/107 5/84 5/107 5/107 5/84 5/107 5/107 5/84 5/107 5/107 5/84 5/107 5/107 5/184 5/184 5/184 5/184 5/184 5/184 5/184 5/184 5/184 5/184 5/84 5/107 5/107 5/84 5/107 5/107 5/84 5/107 5/107 5/84 5/107 5/107 5/84 5/107 5/107 5/277 5/278 5/277 5/278 5/277 5/278 5/277 5/278 5/277 5/278 Order code Type 1SBL411022R8600 UA75-30-00 1SBL411022R8611 UA75-30-11 1SBL411022R8800 UA75-30-00 1SBL411022R8811 UA75-30-11 1SBL411024R8000 UA75-30-00RA 1SBL411024R8100 UA75-30-00RA 1SBL411024R8300 UA75-30-00RA 1SBL411024R8400 UA75-30-00RA 1SBL411024R8500 UA75-30-00RA 1SBL411024R8600 UA75-30-00RA 1SBL411024R8800 UA75-30-00RA 1SBL411025R8000 GA75-10-00 1SBL411025R8011 GA75-10-11 1SBL411025R8100 GA75-10-00 1SBL411025R8111 GA75-10-11 1SBL411025R8300 GA75-10-00 1SBL411025R8311 GA75-10-11 1SBL411025R8400 GA75-10-00 1SBL411025R8411 GA75-10-11 1SBL411025R8500 GA75-10-00 1SBL411025R8511 GA75-10-11 1SBL411025R8600 GA75-10-00 1SBL411025R8611 GA75-10-11 1SBL411025R8800 GA75-10-00 1SBL411025R8811 GA75-10-11 1SBL419025R8000 GAE75-10-00 1SBL419025R8011 GAE75-10-11 1SBL419025R8100 GAE75-10-00 1SBL419025R8111 GAE75-10-11 1SBL419025R8300 GAE75-10-00 1SBL419025R8311 GAE75-10-11 1SBL419025R8400 GAE75-10-00 1SBL419025R8411 GAE75-10-11 1SBL419025R8600 GAE75-10-00 1SBL419025R8611 GAE75-10-11 1SBL419025R8700 GAE75-10-00 1SBL419025R8711 GAE75-10-11 1SBL419025R8800 GAE75-10-00 1SBL419025R8811 GAE75-10-11 1SBL419025R8900 GAE75-10-00 1SBL419025R8911 GAE75-10-11 1SBN010010R1001 CA5-01 1SBN010010R1010 CA5-10 1SBN010011R1001 CC5-01 1SBN010011R1010 CC5-10 1SBN010013R1001 CB5-01 1SBN010013R1010 CB5-10 1SBN010015R1001 CE5-01D0.1 1SBN010015R1010 CE5-10D0.1 1SBN010016R1001 CE5-01W0.1 1SBN010016R1010 CE5-10W0.1 1SBN010017R1001 CE5-01D2 1SBN010017R1010 CE5-10D2 1SBN010018R1001 CE5-01W2 1SBN010018R1010 CE5-10W2 1SBN010020R1011 CAL5-11 1SBN010040R1004 CA5-04E 1SBN010040R1018 CA5-11/11E 1SBN010040R1022 CA5-22E 1SBN010040R1031 CA5-31E 1SBN010040R1040 CA5-40E 1SBN010040R1104 CA5-04M 1SBN010040R1113 CA5-13M 1SBN010040R1118 CA5-11/11M 1SBN010040R1122 CA5-22M 1SBN010040R1131 CA5-31M 1SBN010110R1001 CA4-01 1SBN010110R1010 CA4-10 1SBN010110T1001 CA4-01-T 1SBN010110T1010 CA4-10-T 1SBN010111R1001 CC4-01 1SBN010111R1010 CC4-10 1SBN010119R1001 CA4-01S 1SBN010119R1010 CA4-10S 1SBN010119T1001 CA4-01S-T 1SBN010119T1010 CA4-10S-T 1SBN010120R1011 CAL4-11 1SBN010120T1011 CAL4-11-T 1SBN010130R1011 CAL4-11S 1SBN010140R1004 CA4-04E 1SBN010140R1022 CA4-22E 1SBN010140R1031 CA4-31E 1SBN010140R1040 CA4-40E 1SBN010140R1104 CA4-04M 1SBN010140R1113 CA4-13M 1SBN010140R1122 CA4-22M 1SBN010140R1131 CA4-31M 1SBN010140R1204 CA4-04N 1SBN010140R1213 CA4-13N 1SBN010140R1222 CA4-22N Page 5/277 5/278 5/277 5/278 5/267 5/267 5/267 5/267 5/267 5/267 5/267 5/242 5/242 5/242 5/242 5/242 5/242 5/242 5/242 5/242 5/242 5/242 5/242 5/242 5/242 5/243 5/243 5/243 5/243 5/243 5/243 5/243 5/243 5/243 5/243 5/243 5/243 5/243 5/243 5/243 5/243 5/358 5/358 5/358 5/358 5/340 5/340 5/360 5/360 5/360 5/360 5/360 5/360 5/360 5/360 5/358 5/358 5/358 5/358 5/358 5/358 5/358 5/358 5/358 5/358 5/358 5/87 5/87 5/87 5/87 5/322 5/322 6/51 6/51 6/51 6/51 5/322 5/322 6/51 5/187 5/87 5/187 5/187 5/322 5/322 5/87 5/322 5/307 5/307 5/307 Index Order code Index Order code classification Type 1SBN010140R1231 CA4-31N 1SBN010140R1240 CA4-40N 1SBN010140R1322 CA4-22U 1SBN010140R1331 CA4-31U 1SBN010140R1340 CA4-40U 1SBN010145R1022 CA4-22ES 1SBN010145R1031 CA4-31ES 1SBN010145R1040 CA4-40ES 1SBN010145R1122 CA4-22MS 1SBN010145R1131 CA4-31MS 1SBN010145R1222 CA4-22NS 1SBN010145R1231 CA4-31NS 1SBN010145R1240 CA4-40NS 1SBN010151R1011 CAT4-11E 1SBN010151R1111 CAT4-11M 1SBN010151R1311 CAT4-11U 1SBN010153R1011 CAT4-11ES 1SBN010153R1111 CAT4-11MS 1SBN010153R1311 CAT4-11US 1SBN011010T1001 CA3-01 1SBN011010T1010 CA3-10 1SBN011019T1001 CA3-01S 1SBN011019T1010 CA3-10S 1SBN020112R1000 TEF4-ON 1SBN020113R1000 TEF4S-ON 1SBN020114R1000 TEF4-OFF 1SBN020115R1000 TEF4S-OFF 1SBN020312R1000 TEF5-ON 1SBN020314R1000 TEF5-OFF 1SBN021012R1000 TEF3-ON 1SBN021014R1000 TEF3-OFF 1SBN030105T1000 VM4 1SBN030111R1000 VEM4 1SBN030210R1000 VE5-2 1SBN031005T1000 VM3 1SBN033405T1000 VM96-4 1SBN050010R1000 RV5/50 1SBN050010R1001 RV5/133 1SBN050010R1002 RV5/250 1SBN050010R1003 RV5/440 1SBN050020R1000 RT5/32 1SBN050020R1001 RT5/65 1SBN050020R1002 RT5/90 1SBN050020R1003 RT5/150 1SBN050020R1004 RT5/264 1SBN050100R1000 RC5-1/50 1SBN050100R1001 RC5-1/133 1SBN050100R1002 RC5-1/250 1SBN050100R1003 RC5-1/440 1SBN050200R1000 RC5-2/50 1SBN050200R1001 RC5-2/133 1SBN050200R1002 RC5-2/250 1SBN050200R1003 RC5-2/440 1SBN060300R1000 RA5-1 1SBN060300T1000 RA5-1 1SBN070156T1000 LDC4 1SBN070157T1000 LDC4S 1SBN071303T1000 LY16-4 1SBN071305R1000 LF16-4 1SBN071306R1000 LG16-4 1SBN072303T1000 LY38-4 1SBN072304R1000 LH38-4 1SBN072305R1000 LF38-4 1SBN072308R1000 LD38-4 1SBN073508R1000 LD75 1SBN073552R1002 LK75-F 1SBN073552R1003 LK75-L 1SBN080906R1001 BEA7/325 1SBN080906R1002 BEA7/132 1SBN081006T1000 BEA16-3 1SBN081012R1000 BER16C-3 1SBN081018R2000 BEY16C-3 1SBN081020R1000 BEA16-3U 1SBN081306T1000 BEA16-4 1SBN081311R1000 BER16-4 1SBN081313R2000 BEY16-4 1SBN082306T1000 BEA26-4 1SBN082306T2000 BEA38-4 1SBN082311R1000 BER38-4 1SBN082713R2000 BEY38-4 1SBN083411R1000 BER65-4 1SBN083413R2000 BEY65-4 1SBN083911R1000 BER96-4 1SBN083913R2000 BEY96-4 1SBN101035R1000 FR16AS-12VARS 1SBN110000R1000 BA5-50 1SBN110108T1000 BX4 1SBN110109W1000 BX4-CA 1SBN110120W1000 BB4 1SBN110122T1000 BDT4 Page 5/307 5/307 5/87 5/322 5/322 6/51 6/51 6/51 6/51 6/51 6/73 6/73 6/73 5/87 5/87 5/87 6/51 6/51 6/51 4/37 4/37 6/9 6/9 5/87 6/51 5/87 6/51 5/365 5/365 4/37 4/37 5/87 5/87 5/368 4/37 5/87 4/37 4/37 4/37 4/37 4/37 4/37 4/37 4/37 4/37 4/37 4/37 4/37 4/37 5/372 5/372 5/372 5/372 5/374 5/374 5/307 6/51 5/349 5/349 5/349 5/349 5/349 5/349 5/346 5/378 5/379 5/379 3/39 3/39 4/37 4/37 4/37 6/9 5/87 5/87 5/87 5/87 5/87 5/87 5/87 5/87 5/87 5/87 5/87 8/2 3/39 5/307 5/307 5/338 4/82 Order code Type Page 1SBN111020R1000 BB3 4/82 1SBN111403R1000 BP16 5/371 1SBN112303T1000 BP38-4 5/345 1SBN113403T1000 BP65-4 5/345 1SBN113903T1000 BP96-4 5/345 1SBN151410R8006 ZA16 5/380 1SBN151410R8106 ZA16 5/380 1SBN151410R8306 ZA16 5/380 1SBN151410R8406 ZA16 5/380 1SBN151410R8506 ZA16 5/380 1SBN151410R8606 ZA16 5/380 1SBN151410R8806 ZA16 5/380 1SBN152410R8006 ZA40 5/380 1SBN152410R8106 ZA40 5/380 1SBN152410R8306 ZA40 5/380 1SBN152410R8406 ZA40 5/380 1SBN152410R8506 ZA40 5/380 1SBN152410R8606 ZA40 5/380 1SBN152410R8806 ZA40 5/380 1SBN153510R8006 ZA75 5/380 1SBN153510R8106 ZA75 5/380 1SBN153510R8306 ZA75 5/380 1SBN153510R8406 ZA75 5/380 1SBN153510R8506 ZA75 5/380 1SBN153510R8606 ZA75 5/380 1SBN153510R8806 ZA75 5/380 1SBN163502R1000 ZLU50 5/380 1SBN163702R1000 ZLU63 5/380 1SBN164102R1000 ZLU75 5/380 1SCA101647R1001 OXS6X85 2/38 1SCA101655R1001 OXS6X130 2/38 1SCA101659R1001 OXS6X180 2/38 1SCA108043R1001 OXS6X105 2/38 1SFA616162R1014 KPR-101L 7/4 1SFA739001R1000 E1250DU-1250 7/48 1SFL427001R1100 AF116-30-00-11 5/88 1SFL427001R1111 AF116-30-11-11 5/94 1SFL427001R1122 AF116-30-22-11 5/110 1SFL427001R1200 AF116-30-00-12 5/88 1SFL427001R1211 AF116-30-11-12 5/94 1SFL427001R1222 AF116-30-22-12 5/110 1SFL427001R1300 AF116-30-00-13 5/88 1SFL427001R1311 AF116-30-11-13 5/94 1SFL427001R1322 AF116-30-22-13 5/110 1SFL427001R1400 AF116-30-00-14 5/88 1SFL427001R1411 AF116-30-11-14 5/94 1SFL427001R1422 AF116-30-22-14 5/110 1SFL427001R3300 AF116-30-00-33 5/89 1SFL427001R3311 AF116-30-11-33 5/95 1SFL427001R3322 AF116-30-22-33 5/111 1SFL427001R3400 AF116-30-00-34 5/89 1SFL427001R3411 AF116-30-11-34 5/95 1SFL427001R3422 AF116-30-22-34 5/111 1SFL427002R1100 AF116-30-00B-11 5/88 1SFL427002R1111 AF116-30-11B-11 5/94 1SFL427002R1122 AF116-30-22B-11 5/110 1SFL427002R1200 AF116-30-00B-12 5/88 1SFL427002R1211 AF116-30-11B-12 5/94 1SFL427002R1222 AF116-30-22B-12 5/110 1SFL427002R1300 AF116-30-00B-13 5/88 1SFL427002R1311 AF116-30-11B-13 5/94 1SFL427002R1322 AF116-30-22B-13 5/110 1SFL427002R1400 AF116-30-00B-14 5/88 1SFL427002R1411 AF116-30-11B-14 5/94 1SFL427002R1422 AF116-30-22B-14 5/110 1SFL427002R3300 AF116-30-00B-33 5/89 1SFL427002R3311 AF116-30-11B-33 5/95 1SFL427002R3322 AF116-30-22B-33 5/111 1SFL427002R3400 AF116-30-00B-34 5/89 1SFL427002R3411 AF116-30-11B-34 5/95 1SFL427002R3422 AF116-30-22B-34 5/111 1SFL427101R1100 AF116-40-00-11 5/188 1SFL427101R1111 AF116-40-11-11 5/192 1SFL427101R1122 AF116-40-22-11 5/196 1SFL427101R1200 AF116-40-00-12 5/188 1SFL427101R1211 AF116-40-11-12 5/192 1SFL427101R1222 AF116-40-22-12 5/196 1SFL427101R1300 AF116-40-00-13 5/188 1SFL427101R1311 AF116-40-11-13 5/192 1SFL427101R1322 AF116-40-22-13 5/196 1SFL427101R1400 AF116-40-00-14 5/188 1SFL427101R1411 AF116-40-11-14 5/192 1SFL427101R1422 AF116-40-22-14 5/196 1SFL427102R1100 AF116-40-00B-11 5/188 1SFL427102R1111 AF116-40-11B-11 5/192 1SFL427102R1122 AF116-40-22B-11 5/196 1SFL427102R1200 AF116-40-00B-12 5/188 1SFL427102R1211 AF116-40-11B-12 5/192 1SFL427102R1222 AF116-40-22B-12 5/196 1SFL427102R1300 AF116-40-00B-13 5/188 Order code Type Page 1SFL427102R1311 AF116-40-11B-13 5/192 1SFL427102R1322 AF116-40-22B-13 5/196 1SFL427102R1400 AF116-40-00B-14 5/188 1SFL427102R1411 AF116-40-11B-14 5/192 1SFL427102R1422 AF116-40-22B-14 5/196 1SFL431022R8000 UA95-30-00 5/279 1SFL431022R8011 UA95-30-11 5/280 1SFL431022R8100 UA95-30-00 5/279 1SFL431022R8111 UA95-30-11 5/280 1SFL431022R8300 UA95-30-00 5/279 1SFL431022R8311 UA95-30-11 5/280 1SFL431022R8400 UA95-30-00 5/279 1SFL431022R8411 UA95-30-11 5/280 1SFL431022R8500 UA95-30-00 5/279 1SFL431022R8511 UA95-30-11 5/280 1SFL431022R8600 UA95-30-00 5/279 1SFL431022R8611 UA95-30-11 5/280 1SFL431022R8800 UA95-30-00 5/279 1SFL431022R8811 UA95-30-11 5/280 1SFL431024R8000 UA95-30-00RA 5/268 1SFL431024R8100 UA95-30-00RA 5/268 1SFL431024R8300 UA95-30-00RA 5/268 1SFL431024R8400 UA95-30-00RA 5/268 1SFL431024R8500 UA95-30-00RA 5/268 1SFL431024R8600 UA95-30-00RA 5/268 1SFL431024R8800 UA95-30-00RA 5/268 1SFL447001R1100 AF140-30-00-11 5/88 1SFL447001R1111 AF140-30-11-11 5/94 1SFL447001R1122 AF140-30-22-11 5/110 1SFL447001R1200 AF140-30-00-12 5/88 1SFL447001R1211 AF140-30-11-12 5/94 1SFL447001R1222 AF140-30-22-12 5/110 1SFL447001R1300 AF140-30-00-13 5/88 1SFL447001R1311 AF140-30-11-13 5/94 1SFL447001R1322 AF140-30-22-13 5/110 1SFL447001R1400 AF140-30-00-14 5/88 1SFL447001R1411 AF140-30-11-14 5/94 1SFL447001R1422 AF140-30-22-13 5/110 1SFL447001R3300 AF140-30-00-33 5/89 1SFL447001R3311 AF140-30-11-33 5/95 1SFL447001R3322 AF140-30-22-33 5/111 1SFL447001R3400 AF140-30-00-34 5/89 1SFL447001R3411 AF140-30-11-34 5/95 1SFL447001R3422 AF140-30-22-33 5/111 1SFL447002R1100 AF140-30-00B-11 5/88 1SFL447002R1111 AF140-30-11B-11 5/94 1SFL447002R1122 AF140-30-22B-11 5/110 1SFL447002R1200 AF140-30-00B-12 5/88 1SFL447002R1211 AF140-30-11B-12 5/94 1SFL447002R1222 AF140-30-22B-12 5/110 1SFL447002R1300 AF140-30-00B-13 5/88 1SFL447002R1311 AF140-30-11B-13 5/94 1SFL447002R1322 AF140-30-22B-13 5/110 1SFL447002R1400 AF140-30-00B-14 5/88 1SFL447002R1411 AF140-30-11B-14 5/94 1SFL447002R1422 AF140-30-22B-14 5/110 1SFL447002R3300 AF140-30-00B-33 5/89 1SFL447002R3311 AF140-30-11B-33 5/95 1SFL447002R3322 AF140-30-22B-33 5/111 1SFL447002R3400 AF140-30-00B-34 5/89 1SFL447002R3411 AF140-30-11B-34 5/95 1SFL447002R3422 AF140-30-22B-34 5/111 1SFL447101R1100 AF140-40-00-11 5/188 1SFL447101R1111 AF140-40-11-11 5/192 1SFL447101R1122 AF140-40-22-11 5/196 1SFL447101R1200 AF140-40-00-12 5/188 1SFL447101R1211 AF140-40-11-12 5/192 1SFL447101R1222 AF140-40-22-12 5/196 1SFL447101R1300 AF140-40-00-13 5/188 1SFL447101R1311 AF140-40-11-13 5/192 1SFL447101R1322 AF140-40-22-13 5/196 1SFL447101R1400 AF140-40-00-14 5/188 1SFL447101R1411 AF140-40-11-14 5/192 1SFL447101R1422 AF140-40-22-14 5/196 1SFL447102R1100 AF140-40-00B-11 5/188 1SFL447102R1111 AF140-40-11B-11 5/192 1SFL447102R1122 AF140-40-22B-11 5/196 1SFL447102R1200 AF140-40-00B-12 5/188 1SFL447102R1211 AF140-40-11B-12 5/192 1SFL447102R1222 AF140-40-22B-12 5/196 1SFL447102R1300 AF140-40-00B-13 5/188 1SFL447102R1311 AF140-40-11B-13 5/192 1SFL447102R1322 AF140-40-22B-13 5/196 1SFL447102R1400 AF140-40-00B-14 5/188 1SFL447102R1411 AF140-40-11B-14 5/192 1SFL447102R1422 AF140-40-22B-14 5/196 1SFL451022R8000 UA110-30-00 5/279 1SFL451022R8011 UA110-30-11 5/280 1SFL451022R8100 UA110-30-00 5/279 1SFL451022R8111 UA110-30-11 5/280 ABB | 13/5 13 Index Order code Index Order code classification 13 Type Page 1SFL451022R8300 UA110-30-00 5/279 1SFL451022R8311 UA110-30-11 5/280 1SFL451022R8400 UA110-30-00 5/279 1SFL451022R8411 UA110-30-11 5/280 1SFL451022R8500 UA110-30-00 5/279 1SFL451022R8511 UA110-30-11 5/280 1SFL451022R8600 UA110-30-00 5/279 1SFL451022R8611 UA110-30-11 5/280 1SFL451022R8800 UA110-30-00 5/279 1SFL451022R8811 UA110-30-11 5/280 1SFL451024R8000 UA110-30-00RA 5/268 1SFL451024R8100 UA110-30-00RA 5/268 1SFL451024R8300 UA110-30-00RA 5/268 1SFL451024R8400 UA110-30-00RA 5/268 1SFL451024R8500 UA110-30-00RA 5/268 1SFL451024R8600 UA110-30-00RA 5/268 1SFL451024R8800 UA110-30-00RA 5/268 1SFL467001R1100 AF146-30-00-11 5/88 1SFL467001R1111 AF146-30-11-11 5/94 1SFL467001R1122 AF146-30-22-11 5/110 1SFL467001R1200 AF146-30-00-12 5/88 1SFL467001R1211 AF146-30-11-12 5/94 1SFL467001R1222 AF146-30-22-12 5/110 1SFL467001R1300 AF146-30-00-13 5/88 1SFL467001R1311 AF146-30-11-13 5/94 1SFL467001R1322 AF146-30-22-13 5/110 1SFL467001R1400 AF146-30-00-14 5/88 1SFL467001R1411 AF146-30-11-14 5/94 1SFL467001R1422 AF146-30-22-14 5/110 1SFL467001R3300 AF146-30-00-33 5/89 1SFL467001R3311 AF146-30-11-33 5/95 1SFL467001R3322 AF146-30-22-33 5/111 1SFL467001R3400 AF146-30-00-34 5/89 1SFL467001R3411 AF146-30-11-34 5/95 1SFL467001R3422 AF146-30-22-34 5/111 1SFL467002R1100 AF146-30-00B-11 5/88 1SFL467002R1111 AF146-30-11B-11 5/94 1SFL467002R1122 AF146-30-22B-11 5/110 1SFL467002R1200 AF146-30-00B-12 5/88 1SFL467002R1211 AF146-30-11B-12 5/94 1SFL467002R1222 AF146-30-22B-12 5/110 1SFL467002R1300 AF146-30-00B-13 5/88 1SFL467002R1311 AF146-30-11B-13 5/94 1SFL467002R1322 AF146-30-22B-13 5/110 1SFL467002R1400 AF146-30-00B-14 5/88 1SFL467002R1411 AF146-30-11B-14 5/94 1SFL467002R1422 AF146-30-22B-14 5/110 1SFL467002R3300 AF146-30-00B-33 5/89 1SFL467002R3311 AF146-30-11B-33 5/95 1SFL467002R3322 AF146-30-22B-33 5/111 1SFL467002R3400 AF146-30-00B-34 5/89 1SFL467002R3422 AF146-30-22B-34 5/111 1SFL487002R1100 AF190-30-00-11 5/90 1SFL487002R1111 AF190-30-11-11 5/96 1SFL487002R1122 AF190-30-22-11 5/112 1SFL487002R1200 AF190-30-00-12 5/90 1SFL487002R1211 AF190-30-11-12 5/96 1SFL487002R1222 AF190-30-22-12 5/112 1SFL487002R1300 AF190-30-00-13 5/90 1SFL487002R1311 AF190-30-11-13 5/96 1SFL487002R1322 AF190-30-22-13 5/112 1SFL487002R1400 AF190-30-00-14 5/90 1SFL487002R1411 AF190-30-11-14 5/96 1SFL487002R1422 AF190-30-22-14 5/112 1SFL487002R3300 AF190-30-00-33 5/91 1SFL487002R3311 AF190-30-11-33 5/97 1SFL487002R3322 AF190-30-22-33 5/113 1SFL487002R3400 AF190-30-00-34 5/91 1SFL487002R3411 AF190-30-11-34 5/97 1SFL487002R3422 AF190-30-22-34 5/113 1SFL487102R1100 AF190-40-00-11 5/189 1SFL487102R1111 AF190-40-11-11 5/193 1SFL487102R1122 AF190-40-22-11 5/197 1SFL487102R1200 AF190-40-00-12 5/189 1SFL487102R1211 AF190-40-11-12 5/193 1SFL487102R1222 AF190-40-22-12 5/197 1SFL487102R1300 AF190-40-00-13 5/189 1SFL487102R1311 AF190-40-11-13 5/193 1SFL487102R1322 AF190-40-22-13 5/197 1SFL487102R1400 AF190-40-00-14 5/189 1SFL487102R1411 AF190-40-11-14 5/193 1SFL487102R1422 AF190-40-22-14 5/197 1SFL497025R6911 GAF185-10-11 5/244 1SFL497025R7011 GAF185-10-11 5/244 1SFL497025R7211 GAF185-10-11 5/244 1SFL527002R1100 AF205-30-00-11 5/90 1SFL527002R1111 AF205-30-11-11 5/96 1SFL527002R1122 AF205-30-22-11 5/112 1SFL527002R1200 AF205-30-00-12 5/90 1SFL527002R1211 AF205-30-11-12 5/96 13/6 | ABB Order code Type 1SFL527002R1222 AF205-30-22-12 1SFL527002R1300 AF205-30-00-13 1SFL527002R1311 AF205-30-11-13 1SFL527002R1322 AF205-30-22-13 1SFL527002R1400 AF205-30-00-14 1SFL527002R1411 AF205-30-11-14 1SFL527002R1422 AF205-30-22-14 1SFL527002R3300 AF205-30-00-33 1SFL527002R3311 AF205-30-11-33 1SFL527002R3322 AF205-30-22-33 1SFL527002R3400 AF205-30-00-34 1SFL527002R3411 AF205-30-11-34 1SFL527002R3422 AF205-30-22-34 1SFL527102R1100 AF205-40-00-11 1SFL527102R1111 AF205-40-11-11 1SFL527102R1122 AF205-40-22-11 1SFL527102R1200 AF205-40-00-12 1SFL527102R1211 AF205-40-11-12 1SFL527102R1222 AF205-40-22-12 1SFL527102R1300 AF205-40-00-13 1SFL527102R1311 AF205-40-11-13 1SFL527102R1322 AF205-40-22-13 1SFL527102R1400 AF205-40-00-14 1SFL527102R1411 AF205-40-11-14 1SFL527102R1422 AF205-40-22-14 1SFL547002R1100 AF265-30-00-11 1SFL547002R1111 AF265-30-11-11 1SFL547002R1122 AF265-30-22-11 1SFL547002R1200 AF265-30-00-12 1SFL547002R1211 AF265-30-11-12 1SFL547002R1222 AF265-30-22-12 1SFL547002R1300 AF265-30-00-13 1SFL547002R1311 AF265-30-11-13 1SFL547002R1322 AF265-30-22-13 1SFL547002R1400 AF265-30-00-14 1SFL547002R1411 AF265-30-11-14 1SFL547002R1422 AF265-30-22-14 1SFL547002R3300 AF265-30-00-33 1SFL547002R3311 AF265-30-11-33 1SFL547002R3322 AF265-30-22-33 1SFL547002R3400 AF265-30-00-34 1SFL547002R3411 AF265-30-11-34 1SFL547002R3422 AF265-30-22-34 1SFL547102R1100 AF265-40-00-11 1SFL547102R1111 AF265-40-11-11 1SFL547102R1122 AF265-40-22-11 1SFL547102R1200 AF265-40-00-12 1SFL547102R1211 AF265-40-11-12 1SFL547102R1222 AF265-40-22-12 1SFL547102R1300 AF265-40-00-13 1SFL547102R1311 AF265-40-11-13 1SFL547102R1322 AF265-40-22-13 1SFL547102R1400 AF265-40-00-14 1SFL547102R1411 AF265-40-11-14 1SFL547102R1422 AF265-40-22-14 1SFL557025R6911 GAF300-10-11 1SFL557025R7011 GAF300-10-11 1SFL557025R7211 GAF300-10-11 1SFL577001R6811 AF400-30-11 1SFL577001R6822 AF400-30-22 1SFL577001R6911 AF400-30-11 1SFL577001R6922 AF400-30-22 1SFL577001R7011 AF400-30-11 1SFL577001R7022 AF400-30-22 1SFL577001R7111 AF400-30-11 1SFL577001R7122 AF400-30-22 1SFL587002R1100 AF305-30-00-11 1SFL587002R1111 AF305-30-11-11 1SFL587002R1122 AF305-30-22-11 1SFL587002R1200 AF305-30-00-12 1SFL587002R1211 AF305-30-11-12 1SFL587002R1222 AF305-30-22-12 1SFL587002R1300 AF305-30-00-13 1SFL587002R1311 AF305-30-11-13 1SFL587002R1322 AF305-30-22-13 1SFL587002R1400 AF305-30-00-14 1SFL587002R1411 AF305-30-11-14 1SFL587002R1422 AF305-30-22-14 1SFL587002R3300 AF305-30-00-33 1SFL587002R3311 AF305-30-11-33 1SFL587002R3322 AF305-30-22-33 1SFL587002R3400 AF305-30-00-34 1SFL587002R3411 AF305-30-11-34 1SFL587002R3422 AF305-30-22-34 1SFL587102R1100 AF305-40-00-11 1SFL587102R1111 AF305-40-11-11 1SFL587102R1122 AF305-40-22-11 1SFL587102R1200 AF305-40-00-12 1SFL587102R1211 AF305-40-11-12 1SFL587102R1222 AF305-40-22-12 Page 5/112 5/90 5/96 5/112 5/90 5/96 5/112 5/91 5/97 5/113 5/91 5/97 5/113 5/189 5/193 5/197 5/189 5/193 5/197 5/189 5/193 5/197 5/189 5/193 5/197 5/90 5/96 5/112 5/90 5/96 5/112 5/90 5/96 5/112 5/90 5/96 5/112 5/91 5/97 5/113 5/91 5/97 5/113 5/189 5/193 5/197 5/189 5/193 5/197 5/189 5/193 5/197 5/189 5/193 5/197 5/244 5/244 5/244 5/100 5/116 5/100 5/116 5/100 5/116 5/100 5/116 5/90 5/96 5/112 5/90 5/96 5/112 5/90 5/96 5/112 5/90 5/96 5/112 5/91 5/97 5/113 5/91 5/97 5/113 5/189 5/193 5/197 5/189 5/193 5/197 Order code Type 1SFL587102R1300 AF305-40-00-13 1SFL587102R1311 AF305-40-11-13 1SFL587102R1322 AF305-40-22-13 1SFL587102R1400 AF305-40-00-14 1SFL587102R1411 AF305-40-11-14 1SFL587102R1422 AF305-40-22-14 1SFL597001R6811 AF460-30-11 1SFL597001R6822 AF460-30-22 1SFL597001R6911 AF460-30-11 1SFL597001R6922 AF460-30-22 1SFL597001R7011 AF460-30-11 1SFL597001R7022 AF460-30-22 1SFL597001R7111 AF460-30-11 1SFL597001R7122 AF460-30-22 1SFL597025R6811 GAF460-10-11 1SFL597025R6911 GAF460-10-11 1SFL597025R7011 GAF460-10-11 1SFL597025R7111 GAF460-10-11 1SFL607002R1100 AF370-30-00-11 1SFL607002R1111 AF370-30-11-11 1SFL607002R1122 AF370-30-22-11 1SFL607002R1200 AF370-30-00-12 1SFL607002R1211 AF370-30-11-12 1SFL607002R1222 AF370-30-22-12 1SFL607002R1300 AF370-30-00-13 1SFL607002R1311 AF370-30-11-13 1SFL607002R1322 AF370-30-22-13 1SFL607002R1400 AF370-30-00-14 1SFL607002R1411 AF370-30-11-14 1SFL607002R1422 AF370-30-22-14 1SFL607002R3300 AF370-30-00-33 1SFL607002R3311 AF370-30-11-33 1SFL607002R3322 AF370-30-22-33 1SFL607002R3400 AF370-30-00-34 1SFL607002R3411 AF370-30-11-34 1SFL607002R3422 AF370-30-22-34 1SFL607102R1100 AF370-40-00-11 1SFL607102R1111 AF370-40-11-11 1SFL607102R1122 AF370-40-22-11 1SFL607102R1200 AF370-40-00-12 1SFL607102R1211 AF370-40-11-12 1SFL607102R1222 AF370-40-22-12 1SFL607102R1300 AF370-40-00-13 1SFL607102R1311 AF370-40-11-13 1SFL607102R1322 AF370-40-22-13 1SFL607102R1400 AF370-40-00-14 1SFL607102R1411 AF370-40-11-14 1SFL607102R1422 AF370-40-22-14 1SFL617001R6811 AF580-30-11 1SFL617001R6822 AF580-30-22 1SFL617001R6911 AF580-30-11 1SFL617001R6922 AF580-30-22 1SFL617001R7011 AF580-30-11 1SFL617001R7022 AF580-30-22 1SFL617001R7111 AF580-30-11 1SFL617001R7122 AF580-30-22 1SFL637001R6811 AF750-30-11 1SFL637001R6822 AF750-30-22 1SFL637001R6911 AF750-30-11 1SFL637001R6922 AF750-30-22 1SFL637001R7011 AF750-30-11 1SFL637001R7022 AF750-30-22 1SFL637001R7111 AF750-30-11 1SFL637001R7122 AF750-30-22 1SFL637025R6811 GAF750-10-11 1SFL637025R6911 GAF750-10-11 1SFL637025R7011 GAF750-10-11 1SFL637025R7111 GAF750-10-11 1SFL647001R6811 AF1250-30-11 1SFL647001R6822 AF1250-30-22 1SFL647001R6911 AF1250-30-11 1SFL647001R6922 AF1250-30-22 1SFL647001R7011 AF1250-30-11 1SFL647001R7022 AF1250-30-22 1SFL647001R7111 AF1250-30-11 1SFL647001R7122 AF1250-30-22 1SFL647025R6811 GAF1250-10-11 1SFL647025R6911 GAF1250-10-11 1SFL647025R7011 GAF1250-10-11 1SFL647025R7111 GAF1250-10-11 1SFL657001R7011 AF1350-30-11 1SFL657001R7022 AF1350-30-22 1SFL667001R7011 AF2650-30-11 1SFL667001R7022 AF2650-30-22 1SFL677001R7011 AF1650-30-11 1SFL677001R7022 AF1650-30-22 1SFL677025R7011 GAF1650-10-11 1SFL707001R7011 AF2050-30-11 1SFL707001R7022 AF2050-30-22 1SFL707025R7011 GAF2050-10-11 Page 5/189 5/193 5/197 5/189 5/193 5/197 5/100 5/116 5/100 5/116 5/100 5/116 5/100 5/116 5/245 5/245 5/245 5/245 5/90 5/96 5/112 5/90 5/96 5/112 5/90 5/96 5/112 5/90 5/96 5/112 5/91 5/97 5/113 5/91 5/97 5/113 5/189 5/193 5/197 5/189 5/193 5/197 5/189 5/193 5/197 5/189 5/193 5/197 5/100 5/116 5/100 5/116 5/100 5/116 5/100 5/116 5/100 5/116 5/100 5/116 5/100 5/116 5/100 5/116 5/245 5/245 5/245 5/245 5/101 5/117 5/101 5/117 5/101 5/117 5/101 5/117 5/246 5/246 5/246 5/246 5/101 5/117 5/101 5/117 5/101 5/117 5/246 5/101 5/117 5/246 Index Order code Index Order code classification Type Page 1SFN010716R1001 CEL18-01 5/247 1SFN010716R1010 CEL18-10 5/247 1SFN010720R1011 CAL18-11 5/103 1SFN010720R3311 CAL18-11B 5/103 1SFN010820R1011 CAL19-11 5/93 1SFN010820R3311 CAL19-11B 5/93 1SFN030300R1000 VM19 5/93 1SFN034403R1000 VM140/190 5/93 1SFN035203R1000 VM205/265 5/93 1SFN035700R1000 VM750H 5/103 1SFN035701R1000 VM750V 5/338 1SFN036503R1000 VM1650H 5/103 1SFN074203R1000 LY140 5/349 1SFN074207R1000 LW140 5/93 1SFN074208R1000 LD146-30 5/348 1SFN074208R2000 LD146-40 5/348 1SFN074210R1000 LX140 5/93 1SFN074211R1000 LL146-30 5/348 1SFN074211R2000 LL146-40 5/348 1SFN074307R1000 LW110 5/378 1SFN074703R1000 LY185 5/349 1SFN074712R1000 LP185 5/247 1SFN074807R1000 LW205 5/93 1SFN074807R2000 LW205-40 5/191 1SFN074810R1000 LX205 5/93 1SFN074811R2000 LL205-40 5/348 1SFN075103R1000 LY300 5/349 1SFN075112R1000 LP300 5/247 1SFN075407R1000 LW370 5/93 1SFN075407R2000 LW370-40 5/191 1SFN075410R1000 LX370 5/93 1SFN075411R2000 LL370-40 5/348 1SFN075703R1000 LY460 5/349 1SFN075707R1000 LW460 5/103 1SFN075710R1000 LX460 5/103 1SFN075712R1000 LP460 5/247 1SFN076103R1000 LY750 5/349 1SFN076107R1000 LW750 5/103 1SFN076110R1000 LX750 5/103 1SFN076112R1000 LP750 5/247 1SFN076407R1000 LW1250 5/103 1SFN076412R1000 LP1250 5/247 1SFN076512R1000 LP2050 5/247 1SFN084206R1000 BEA140/XT2 5/352 1SFN084206R1001 BEA140/XT4 5/352 1SFN084211R1000 BER140-4 5/350 1SFN084214R1000 BEP140-30 5/350 1SFN084214R2000 BEP140-40 5/350 1SFN084413R1000 BEY140-4 5/351 1SFN084806R1000 BEA205/XT4 5/352 1SFN084806R1001 BEA205/T4 5/352 1SFN084811R1000 BER205-4 5/350 1SFN084813R1000 BEY190-4 5/351 1SFN084814R1000 BEP205-30 5/350 1SFN084814R2000 BEP205-40 5/350 1SFN085213R1000 BEY205-4 5/351 1SFN085406R1000 BEA370/T5 5/352 1SFN085411R1000 BER370-4 5/350 1SFN085413R1000 BEY265-4 5/351 1SFN085414R1000 BEP370-30 5/350 1SFN085414R2000 BEP370-40 5/350 1SFN085701R1000 BEM460-30 5/350 1SFN085703R1000 BED460 5/351 1SFN085704R1000 BES460 5/350 1SFN085708R1000 BEF460/OESA400 5/352 1SFN085709R1000 OESA460H/OESA400 5/352 1SFN085813R1000 BEY370-4 5/351 1SFN085903R1000 BED580 5/351 1SFN085907R1000 BEA460H/T4 5/352 1SFN086101R1000 BEM750-30 5/350 1SFN086103R1000 BED750 5/351 1SFN086104R1000 BES750 5/350 1SFN086106R1000 BEA750/T6 5/352 1SFN086106R1001 BEA750/T5 5/352 1SFN086106R1002 BEA750D/T6 5/352 1SFN086106R1003 BEA750D/T5 5/352 1SFN086108R1000 BEF750/OESA800 5/352 1SFN094200R1000 PR146-1 5/354 1SFN094900R1000 PR210-1 5/354 1SFN095100R1001 PR185-2 5/354 1SFN095300R1000 PR300-1 5/354 1SFN095300R1001 PR300-2 5/354 1SFN095700R1000 PR460-1 5/354 1SFN095700R1001 PR460-2 5/354 1SFN095700R1002 PR400-2 5/354 1SFN095701R1000 PN460-21 5/353 1SFN095703R1000 PN460-41 5/353 1SFN095705R1000 PN460-11 5/353 1SFN096100R1000 PR750-1 5/354 1SFN096100R1001 PR750-2 5/354 Order code Type Page 1SFN096100R1002 PR580-2 5/354 1SFN096101R1000 PN750-21 5/353 1SFN096103R1000 PN750-41 5/353 1SFN096105R1000 PN750-11 5/353 1SFN124203R1000 LT140-30L 5/93 1SFN124203R2000 LT140-40L 5/191 1SFN124801R1000 LT205-30C 5/93 1SFN124801R2000 LT205-40C 5/191 1SFN124803R1000 LT205-30L 5/93 1SFN124803R2000 LT205-40L 5/191 1SFN124804R1000 LT205-30Y 5/93 1SFN125401R1000 LT370-30C 5/93 1SFN125401R2000 LT370-40C 5/191 1SFN125403R1000 LT370-30L 5/93 1SFN125403R2000 LT370-40L 5/191 1SFN125404R1000 LT370-30Y 5/93 1SFN125406R1000 LT370-30D 5/93 1SFN125701R1000 LT460-AC 5/103 1SFN125703R1000 LT460-AL 5/103 1SFN126101R1000 LT750-AC 5/103 1SFN126103R1000 LT750-AL 5/103 1SFN154310R8006 ZA110 5/380 1SFN154310R8106 ZA110 5/380 1SFN154310R8306 ZA110 5/380 1SFN154310R8406 ZA110 5/380 1SFN154310R8506 ZA110 5/380 1SFN154310R8606 ZA110 5/380 1SFN154310R8806 ZA110 5/380 1SFN155770R6806 ZAF460 5/355 1SFN155770R6906 ZAF460 5/355 1SFN155770R7006 ZAF460 5/355 1SFN155770R7106 ZAF460 5/355 1SFN156170R6806 ZAF750 5/355 1SFN156170R6906 ZAF750 5/355 1SFN156170R7006 ZAF750 5/355 1SFN156170R7106 ZAF750 5/355 1SFN156570R7026 ZAF1650 5/355 1SFN156670R7026 ZAF2650 5/355 1SFN164302R1000 ZLU95 5/380 1SFN164502R1000 ZLU110 5/380 1SFN165703R1000 ZL400 5/355 1SFN165710R1000 ZW460 5/355 1SFN165903R1000 ZL460 5/355 1SFN166103R1000 ZL580 5/355 1SFN166110R1000 ZW750 5/355 1SFN166303R1000 ZL750 5/355 1SFN166403R1000 ZL1250 5/355 1SFN166503R1000 ZL1350 5/355 1SFN166510R1000 ZW1650 5/355 1SFN166521R1070 ZP1650 5/355 1SFN166603R1000 ZL2650 5/355 1SFN166610R1000 ZW2650 5/355 1SFN166621R1070 ZP2650 5/355 1SFN166703R1000 ZL1650 5/355 1SFN167003R1000 ZL2050 5/355 1SNA235156R2700 BA4 4/82 1SNA235712R2400 HTP500-BA4 4/82 1SNA360010R1500 SPRC 1 4/82 2CCS801901R0539 S801S-SCL32-SR 11/2 2CCS801901R0599 S801S-SCL63-SR 11/2 2CCS801901R0639 S801S-SCL100-SR 11/2 2CCS802901R0539 S802S-SCL32-SR 11/2 2CCS802901R0599 S802S-SCL63-SR 11/2 2CCS802901R0639 S802S-SCL100-SR 11/2 2CCS803901R0539 S803S-SCL32-SR 11/2 2CCS803901R0599 S803S-SCL63-SR 11/2 2CCS803901R0639 S803S-SCL100-SR 11/2 2CCS803917R0539 S803W-SCL32-SR 11/2 2CCS803917R0599 S803W-SCL63-SR 11/2 2CCS803917R0639 S803W-SCL100-SR 11/2 FPTN372726R1001 WB75-A 5/342 FPTN372726R1002 WB75-A 5/342 FPTN372726R1003 WB75-A 5/342 FPTN372726R1004 WB75-A 5/342 FPTN372726R1005 WB75-A 5/342 FPTN372726R1006 WB75-A 5/342 FPTN372726R1007 WB75-A 5/342 FPTN372726R1008 WB75-A 5/342 GHV2501902R0002 RV-BC6/60 3/39 GHV2501902R0003 RV-BC6-F/60 3/39 GHV2501903R0002 RV-BC6/250 3/39 GHV2501903R0003 RV-BC6-F/250 3/39 GHV2501904R0002 RV-BC6/380 3/39 GHV2501904R0003 RV-BC6-F/380 3/39 GJF1101903R0001 SA1 2/20 GJF1101903R0002 SA2 2/20 GJF1101903R0003 SA3 2/20 GJH1211001R0221 K6-22Z-01 3/15 GJH1211001R0222 K6-22Z-02 3/15 GJH1211001R0223 K6-22Z-03 3/15 Order code Type Page GJH1211001R0311 K6-31Z-01 GJH1211001R0312 K6-31Z-02 GJH1211001R0313 K6-31Z-03 GJH1211001R0401 K6-40E-01 GJH1211001R0402 K6-40E-02 GJH1211001R0403 K6-40E-03 GJH1211001R8220 K6-22Z-80 GJH1211001R8224 K6-22Z-84 GJH1211001R8225 K6-22Z-85 GJH1211001R8310 K6-31Z-80 GJH1211001R8314 K6-31Z-84 GJH1211001R8315 K6-31Z-85 GJH1211001R8400 K6-40E-80 GJH1211001R8404 K6-40E-84 GJH1211001R8405 K6-40E-85 GJH1211003R0221 K6-22Z-F-01 GJH1211003R0222 K6-22Z-F-02 GJH1211003R0223 K6-22Z-F-03 GJH1211003R0311 K6-31Z-F-01 GJH1211003R0312 K6-31Z-F-02 GJH1211003R0313 K6-31Z-F-03 GJH1211003R0401 K6-40E-F-01 GJH1211003R0402 K6-40E-F-02 GJH1211003R0403 K6-40E-F-03 GJH1211003R8220 K6-22Z-F-80 GJH1211003R8224 K6-22Z-F-84 GJH1211003R8225 K6-22Z-F-85 GJH1211003R8310 K6-31Z-F-80 GJH1211003R8314 K6-31Z-F-84 GJH1211003R8315 K6-31Z-F-85 GJH1211003R8400 K6-40E-F-80 GJH1211003R8404 K6-40E-F-84 GJH1211003R8405 K6-40E-F-85 GJH1211009R0221 K6-22Z-P-01 GJH1211009R0222 K6-22Z-P-02 GJH1211009R0223 K6-22Z-P-03 GJH1211009R0311 K6-31Z-P-01 GJH1211009R0312 K6-31Z-P-02 GJH1211009R0313 K6-31Z-P-03 GJH1211009R0401 K6-40E-P-01 GJH1211009R0402 K6-40E-P-02 GJH1211009R0403 K6-40E-P-03 GJH1211009R8220 K6-22Z-P-80 GJH1211009R8224 K6-22Z-P-84 GJH1211009R8225 K6-22Z-P-85 GJH1211009R8310 K6-31Z-P-80 GJH1211009R8314 K6-31Z-P-84 GJH1211009R8315 K6-31Z-P-85 GJH1211009R8400 K6-40E-P-80 GJH1211009R8404 K6-40E-P-84 GJH1211009R8405 K6-40E-P-85 GJH1213001R0221 KC6-22Z-01 GJH1213001R0223 KC6-22Z-03 GJH1213001R0224 KC6-22Z-04 GJH1213001R0225 KC6-22Z-05 GJH1213001R0227 KC6-22Z-07 GJH1213001R0311 KC6-31Z-01 GJH1213001R0313 KC6-31Z-03 GJH1213001R0314 KC6-31Z-04 GJH1213001R0315 KC6-31Z-05 GJH1213001R0317 KC6-31Z-07 GJH1213001R0401 KC6-40E-01 GJH1213001R0403 KC6-40E-03 GJH1213001R0404 KC6-40E-04 GJH1213001R0405 KC6-40E-05 GJH1213001R0407 KC6-40E-07 GJH1213001R1226 KC6-22Z-16 GJH1213001R1316 KC6-31Z-16 GJH1213001R1406 KC6-40E-16 GJH1213001R5311 KC6-31Z-2.4-51 GJH1213001R5401 KC6-40E-2.4-51 GJH1213001R7221 K6S-22Z-1.7-71 GJH1213001R7222 K6S-22Z-2.8-72 GJH1213001R7311 K6S-31Z-1.7-71 GJH1213001R7312 K6S-31Z-2.8-72 GJH1213001R7401 K6S-40E-1.7-71 GJH1213001R7402 K6S-40E-2.8-72 GJH1213001R8311 KC6-31Z-1.4-81 GJH1213001R8401 KC6-40E-1.4-81 GJH1213003R0221 KC6-22Z-F-01 GJH1213003R0224 KC6-22Z-F-04 GJH1213003R0225 KC6-22Z-F-05 GJH1213003R0227 KC6-22Z-F-07 GJH1213003R0311 KC6-31Z-F-01 GJH1213003R0314 KC6-31Z-F-04 GJH1213003R0315 KC6-31Z-F-05 GJH1213003R0317 KC6-31Z-F-07 GJH1213003R0401 KC6-40E-F-01 GJH1213003R0404 KC6-40E-F-04 GJH1213003R0405 KC6-40E-F-05 3/15 3/15 3/15 3/15 3/15 3/15 3/15 3/15 3/15 3/15 3/15 3/15 3/15 3/15 3/15 3/36 3/36 3/36 3/36 3/36 3/36 3/36 3/36 3/36 3/36 3/36 3/36 3/36 3/36 3/36 3/36 3/36 3/36 3/25 3/25 3/25 3/25 3/25 3/25 3/25 3/25 3/25 3/25 3/25 3/25 3/25 3/25 3/25 3/25 3/25 3/25 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/16 3/17 3/17 3/17 3/17 3/17 3/17 3/17 3/17 3/17 3/17 3/37 3/37 3/37 3/37 3/37 3/37 3/37 3/37 3/37 3/37 3/37 ABB | 13/7 13 Index Order code Index Order code classification 13 Type GJH1213003R1226 KC6-22Z-F-16 GJH1213003R1316 KC6-31Z-F-16 GJH1213003R1406 KC6-40E-F-16 GJH1213003R5311 KC6-31Z-F-51 GJH1213003R5401 KC6-40E-F-51 GJH1213003R8311 KC6-31Z-F-1.4-81 GJH1213003R8401 KC6-40E-F-1.4-81 GJH1213009R0221 KC6-22Z-P-01 GJH1213009R0224 KC6-22Z-P-04 GJH1213009R0225 KC6-22Z-P-05 GJH1213009R0227 KC6-22Z-P-07 GJH1213009R0311 KC6-31Z-P-01 GJH1213009R0314 KC6-31Z-P-04 GJH1213009R0315 KC6-31Z-P-05 GJH1213009R0401 KC6-40E-P-01 GJH1213009R0404 KC6-40E-P-04 GJH1213009R0405 KC6-40E-P-05 GJH1213009R0407 KC6-40E-P-07 GJH1213009R1226 KC6-22Z-P-16 GJH1213009R1316 KC6-31Z-P-16 GJH1213009R1406 KC6-40E-P-16 GJH1213009R5311 KC6-31Z-P-2.4-51 GJH1213009R5401 KC6-40E-P-2.4-51 GJH1213009R8311 KC6-31Z-P-1.4-81 GJH1213009R8401 KC6-40E-P-1.4-81 GJH1213061R5221 TKC6-22Z-51 GJH1213061R5225 TKC6-22Z-55 GJH1213061R5311 TKC6-31Z-51 GJH1213061R5315 TKC6-31Z-55 GJH1213061R5401 TKC6-40E-51 GJH1213061R5405 TKC6-40E-55 GJH1213061R6222 TKC6-22Z-62 GJH1213061R6228 TKC6-22Z-68 GJH1213061R6312 TKC6-31Z-62 GJH1213061R6318 TKC6-31Z-68 GJH1213061R6402 TKC6-40E-62 GJH1213061R6408 TKC6-40E-68 GJL1201317R0001 CA6-11K GJL1201317R0002 CA6-11E GJL1201317R0003 CA6-11M GJL1201317R0004 CA6-11N GJL1201318R0001 CA6-11K-F GJL1201318R0002 CA6-11E-F GJL1201318R0003 CA6-11M-F GJL1201318R0004 CA6-11N-F GJL1201319R0001 CA6-11K-P GJL1201319R0002 CA6-11E-P GJL1201319R0003 CA6-11M-P GJL1201319R0004 CA6-11N-P GJL1201330R0001 CAF6-11K GJL1201330R0002 CAF6-11E GJL1201330R0003 CAF6-11M GJL1201330R0004 CAF6-11N GJL1201330R0005 CAF6-20K GJL1201330R0006 CAF6-20E GJL1201330R0007 CAF6-20M GJL1201330R0008 CAF6-20N GJL1201330R0009 CAF6-02K GJL1201330R0010 CAF6-02E GJL1201330R0011 CAF6-02M GJL1201330R0012 CAF6-02N GJL1201902R0001 LB6 GJL1201903R0001 LB6-CA GJL1201906R0001 LT6-B GJL1201907R0001 LP6 GJL1201908R0001 BSM6-30 GJL1211001R0011 B6-30-01-01 GJL1211001R0012 B6-30-01-02 GJL1211001R0013 B6-30-01-03 GJL1211001R0101 B6-30-10-01 GJL1211001R0102 B6-30-10-02 GJL1211001R0103 B6-30-10-03 GJL1211001R8010 B6-30-01-80 GJL1211001R8014 B6-30-01-84 GJL1211001R8015 B6-30-01-85 GJL1211001R8100 B6-30-10-80 GJL1211001R8104 B6-30-10-84 GJL1211001R8105 B6-30-10-85 GJL1211003R0011 B6-30-01-F-01 GJL1211003R0012 B6-30-01-F-02 GJL1211003R0013 B6-30-01-F-03 GJL1211003R0101 B6-30-10-F-01 GJL1211003R0102 B6-30-10-F-02 GJL1211003R0103 B6-30-10-F-03 GJL1211003R8010 B6-30-01-F-80 GJL1211003R8014 B6-30-01-F-84 GJL1211003R8015 B6-30-01-F-85 GJL1211003R8100 B6-30-10-F-80 GJL1211003R8104 B6-30-10-F-84 GJL1211003R8105 B6-30-10-F-85 13/8 | ABB Page Order code 3/37 3/37 3/37 3/38 3/38 3/38 3/38 3/26 3/26 3/26 3/26 3/26 3/26 3/26 3/26 3/26 3/26 3/26 3/26 3/26 3/26 3/28 3/28 3/28 3/28 3/18 3/18 3/18 3/18 3/18 3/18 3/18 3/18 3/18 3/18 3/18 3/18 3/40 3/39 3/39 3/39 3/40 3/39 3/39 3/39 3/40 3/39 3/39 3/39 3/40 3/39 3/39 3/39 3/40 3/39 3/39 3/39 3/40 3/39 3/39 3/39 3/39 3/39 3/39 3/39 3/39 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/29 3/29 3/29 3/29 3/29 3/29 3/29 3/29 3/29 3/29 3/29 3/29 GJL1211009R0011 B6-30-01-P-01 GJL1211009R0012 B6-30-01-P-02 GJL1211009R0013 B6-30-01-P-03 GJL1211009R0101 B6-30-10-P-01 GJL1211009R0102 B6-30-10-P-02 GJL1211009R0103 B6-30-10-P-03 GJL1211009R8010 B6-30-01-P-80 GJL1211009R8014 B6-30-01-P-84 GJL1211009R8015 B6-30-01-P-85 GJL1211009R8100 B6-30-10-P-80 GJL1211009R8104 B6-30-10-P-84 GJL1211009R8105 B6-30-10-P-85 GJL1211201R0001 B6-40-00-01 GJL1211201R0002 B6-40-00-02 GJL1211201R0003 B6-40-00-03 GJL1211201R8000 B6-40-00-80 GJL1211201R8004 B6-40-00-84 GJL1211501R0001 B6-22-00-01 GJL1211501R0002 B6-22-00-02 GJL1211501R0003 B6-22-00-03 GJL1211501R8000 B6-22-00-80 GJL1211501R8004 B6-22-00-84 GJL1211901R0011 VB6-30-01-01 GJL1211901R0012 VB6-30-01-02 GJL1211901R0013 VB6-30-01-03 GJL1211901R0101 VB6-30-10-01 GJL1211901R0102 VB6-30-10-02 GJL1211901R0103 VB6-30-10-03 GJL1211901R8010 VB6-30-01-80 GJL1211901R8014 VB6-30-01-84 GJL1211901R8015 VB6-30-01-85 GJL1211901R8100 VB6-30-10-80 GJL1211901R8104 VB6-30-10-84 GJL1211901R8105 VB6-30-10-85 GJL1211909R0011 VB6-30-01-P-01 GJL1211909R0012 VB6-30-01-P-02 GJL1211909R0013 VB6-30-01-P-03 GJL1211909R0101 VB6-30-10-P-01 GJL1211909R0102 VB6-30-10-P-02 GJL1211909R0103 VB6-30-10-P-03 GJL1211909R8010 VB6-30-01-P-80 GJL1211909R8014 VB6-30-01-P-84 GJL1211909R8015 VB6-30-01-P-85 GJL1211909R8100 VB6-30-10-P-80 GJL1211909R8104 VB6-30-10-P-84 GJL1211909R8105 VB6-30-10-P-85 GJL1211911R0011 VB6A-30-01-01 GJL1211911R0012 VB6A-30-01-02 GJL1211911R0013 VB6A-30-01-03 GJL1211911R0101 VB6A-30-10-01 GJL1211911R0102 VB6A-30-10-02 GJL1211911R0103 VB6A-30-10-03 GJL1211911R8010 VB6A-30-01-80 GJL1211911R8014 VB6A-30-01-84 GJL1211911R8015 VB6A-30-01-85 GJL1211911R8100 VB6A-30-10-80 GJL1211911R8104 VB6A-30-10-84 GJL1211911R8105 VB6A-30-10-85 GJL1211919R0011 VB6A-30-01-P-01 GJL1211919R0012 VB6A-30-01-P-02 GJL1211919R0013 VB6A-30-01-P-03 GJL1211919R0101 VB6A-30-10-P-01 GJL1211919R0102 VB6A-30-10-P-02 GJL1211919R0103 VB6A-30-10-P-03 GJL1211919R8010 VB6A-30-01-P-80 GJL1211919R8014 VB6A-30-01-P-84 GJL1211919R8015 VB6A-30-01-P-85 GJL1211919R8100 VB6A-30-10-P-80 GJL1211919R8104 VB6A-30-10-P-84 GJL1211919R8105 VB6A-30-10-P-85 GJL1213001R0011 BC6-30-01-01 GJL1213001R0013 BC6-30-01-03 GJL1213001R0014 BC6-30-01-04 GJL1213001R0015 BC6-30-01-05 GJL1213001R0017 BC6-30-01-07 GJL1213001R0101 BC6-30-10-01 GJL1213001R0103 BC6-30-10-03 GJL1213001R0104 BC6-30-10-04 GJL1213001R0105 BC6-30-10-05 GJL1213001R0107 BC6-30-10-07 GJL1213001R1016 BC6-30-01-16 GJL1213001R1106 BC6-30-10-16 GJL1213001R5011 BC6-30-01-2.4-51 GJL1213001R5101 BC6-30-10-2.4-51 GJL1213001R7011 B6S-30-01-1.7-71 GJL1213001R7012 B6S-30-01-2.8-72 GJL1213001R7101 B6S-30-10-1.7-71 GJL1213001R7102 B6S-30-10-2.8-72 GJL1213001R8011 BC6-30-01-1.4-81 GJL1213001R8101 BC6-30-10-1.4-81 Type Page Order code 3/19 3/19 3/19 3/19 3/19 3/19 3/19 3/19 3/19 3/19 3/19 3/19 3/12 3/12 3/12 3/12 3/12 3/12 3/12 3/12 3/12 3/12 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/21 3/21 3/21 3/21 3/21 3/21 3/21 3/21 3/21 3/21 3/21 3/21 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/23 3/23 3/23 3/23 3/23 3/23 3/23 3/23 3/23 3/23 3/23 3/23 3/5 3/5 3/5 3/5 3/5 3/5 3/5 3/5 3/5 3/5 3/5 3/5 3/10 3/10 3/10 3/10 3/10 3/10 3/10 3/10 GJL1213003R0011 BC6-30-01-F-01 3/30 GJL1213003R0013 BC6-30-01-F-03 3/30 GJL1213003R0014 BC6-30-01-F-04 3/30 GJL1213003R0015 BC6-30-01-F-05 3/30 GJL1213003R0017 BC6-30-01-F-07 3/30 GJL1213003R0101 BC6-30-10-F-01 3/30 GJL1213003R0103 BC6-30-10-F-03 3/30 GJL1213003R0104 BC6-30-10-F-04 3/30 GJL1213003R0105 BC6-30-10-F-05 3/30 GJL1213003R0107 BC6-30-10-F-07 3/30 GJL1213003R1016 BC6-30-01-F-16 3/30 GJL1213003R1106 BC6-30-10-F-16 3/30 GJL1213003R5011 BC6-30-01-F-2.4-51 3/35 GJL1213003R5101 BC6-30-10-F-2.4-51 3/35 GJL1213003R8011 BC6-30-01-F-1.4-81 3/35 GJL1213003R8101 BC6-30-10-F-1.4-81 3/35 GJL1213009R0011 BC6-30-01-P-01 3/20 GJL1213009R0013 BC6-30-01-P-03 3/20 GJL1213009R0014 BC6-30-01-P-04 3/20 GJL1213009R0015 BC6-30-01-P-05 3/20 GJL1213009R0017 BC6-30-01-P-07 3/20 GJL1213009R0101 BC6-30-10-P-01 3/20 GJL1213009R0103 BC6-30-10-P-03 3/20 GJL1213009R0104 BC6-30-10-P-04 3/20 GJL1213009R0105 BC6-30-10-P-05 3/20 GJL1213009R0107 BC6-30-10-P-07 3/20 GJL1213009R1016 BC6-30-01-P-16 3/20 GJL1213009R1106 BC6-30-10-P-16 3/20 GJL1213009R5011 BC6-30-01-P-2.4-51 3/27 GJL1213009R5101 BC6-30-10-P-2.4-51 3/27 GJL1213009R8011 BC6-30-01-P-1.4-81 3/27 GJL1213009R8101 BC6-30-10-P-1.4-81 3/27 GJL1213109R0101 BC6-21-10-P-01 3/20 GJL1213109R0103 BC6-21-10-P-03 3/20 GJL1213109R0104 BC6-21-10-P-04 3/20 GJL1213109R0105 BC6-21-10-P-05 3/20 GJL1213109R1106 BC6-21-10-P-16 3/20 GJL1213501R0001 BC6-22-00-01 3/13 GJL1213501R0002 BC6-22-00-02 3/13 GJL1213501R0003 BC6-22-00-03 3/13 GJL1213501R0004 BC6-22-00-04 3/13 GJL1213501R0005 BC6-22-00-05 3/13 GJL1213501R0007 BC6-22-00-07 3/13 GJL1213501R1006 BC6-22-00-16 3/13 GJL1213901R0011 VBC6-30-01-01 3/7 GJL1213901R0013 VBC6-30-01-03 3/7 GJL1213901R0014 VBC6-30-01-04 3/7 GJL1213901R0015 VBC6-30-01-05 3/7 GJL1213901R0017 VBC6-30-01-07 3/7 GJL1213901R0101 VBC6-30-10-01 3/7 GJL1213901R0103 VBC6-30-10-03 3/7 GJL1213901R0104 VBC6-30-10-04 3/7 GJL1213901R0105 VBC6-30-10-05 3/7 GJL1213901R0107 VBC6-30-10-07 3/7 GJL1213901R1016 VBC6-30-01-16 3/7 GJL1213901R1106 VBC6-30-10-16 3/7 GJL1213909R0011 VBC6-30-01-P-01 3/22 GJL1213909R0013 VBC6-30-01-P-03 3/22 GJL1213909R0014 VBC6-30-01-P-04 3/22 GJL1213909R0015 VBC6-30-01-P-05 3/22 GJL1213909R0016 VBC6-30-06-P-06 3/22 GJL1213909R0017 VBC6-30-01-P-07 3/22 GJL1213909R0101 VBC6-30-10-P-01 3/22 GJL1213909R0103 VBC6-30-10-P-03 3/22 GJL1213909R0104 VBC6-30-10-P-04 3/22 GJL1213909R0105 VBC6-30-10-P-05 3/22 GJL1213909R0106 VBC6-30-10-P-06 3/22 GJL1213909R0107 VBC6-30-10-P-07 3/22 GJL1213911R0011 VBC6A-30-01-01 3/9 GJL1213911R0013 VBC6A-30-01-03 3/9 GJL1213911R0014 VBC6A-30-01-04 3/9 GJL1213911R0015 VBC6A-30-01-05 3/9 GJL1213911R0017 VBC6A-30-01-07 3/9 GJL1213911R0101 VBC6A-30-10-01 3/9 GJL1213911R0103 VBC6A-30-10-03 3/9 GJL1213911R0104 VBC6A-30-10-04 3/9 GJL1213911R0105 VBC6A-30-10-05 3/9 GJL1213911R0107 VBC6A-30-10-07 3/9 GJL1213911R1016 VBC6A-30-01-16 3/9 GJL1213911R1106 VBC6A-30-10-16 3/9 GJL1311001R0011 B7-30-01-01 3/4 GJL1311001R0012 B7-30-01-02 3/4 GJL1311001R0013 B7-30-01-03 3/4 GJL1311001R0101 B7-30-10-01 3/4 GJL1311001R0102 B7-30-10-02 3/4 GJL1311001R0103 B7-30-10-03 3/4 GJL1311001R8010 B7-30-01-80 3/4 GJL1311001R8014 B7-30-01-84 3/4 GJL1311001R8015 B7-30-01-85 3/4 GJL1311001R8100 B7-30-10-80 3/4 Type Page Index Order code Index Order code classification Type GJL1311001R8104 B7-30-10-84 GJL1311001R8105 B7-30-10-85 GJL1311003R0011 B7-30-01-F-01 GJL1311003R0012 B7-30-01-F-02 GJL1311003R0013 B7-30-01-F-03 GJL1311003R0101 B7-30-10-F-01 GJL1311003R0102 B7-30-10-F-02 GJL1311003R0103 B7-30-10-F-03 GJL1311003R8010 B7-30-01-F-80 GJL1311003R8014 B7-30-01-F-84 GJL1311003R8015 B7-30-01-F-85 GJL1311003R8100 B7-30-10-F-80 GJL1311003R8104 B7-30-10-F-84 GJL1311003R8105 B7-30-10-F-85 GJL1311009R0011 B7-30-01-P-01 GJL1311009R0012 B7-30-01-P-02 GJL1311009R0013 B7-30-01-P-03 GJL1311009R0101 B7-30-10-P-01 GJL1311009R0102 B7-30-10-P-02 GJL1311009R0103 B7-30-10-P-03 GJL1311009R8010 B7-30-01-P-80 GJL1311009R8014 B7-30-01-P-84 GJL1311009R8015 B7-30-01-P-85 GJL1311009R8100 B7-30-10-P-80 GJL1311009R8104 B7-30-10-P-84 GJL1311009R8105 B7-30-10-P-85 GJL1311201R0001 B7-40-00-01 GJL1311201R0002 B7-40-00-02 GJL1311201R0003 B7-40-00-03 GJL1311201R8000 B7-40-00-80 GJL1311201R8004 B7-40-00-84 GJL1311501R0001 B7-22-00-01 GJL1311501R0002 B7-22-00-02 GJL1311501R0003 B7-22-00-03 GJL1311501R8000 B7-22-00-80 GJL1311501R8004 B7-22-00-84 GJL1311901R0011 VB7-30-01-01 GJL1311901R0012 VB7-30-01-02 GJL1311901R0013 VB7-30-01-03 GJL1311901R0101 VB7-30-10-01 GJL1311901R0102 VB7-30-10-02 GJL1311901R0103 VB7-30-10-03 GJL1311901R8010 VB7-30-01-80 GJL1311901R8014 VB7-30-01-84 GJL1311901R8015 VB7-30-01-85 GJL1311901R8100 VB7-30-10-80 GJL1311901R8104 VB7-30-10-84 GJL1311901R8105 VB7-30-10-85 GJL1311903R0011 VB7-30-01-F-01 GJL1311903R0012 VB7-30-01-F-02 GJL1311903R0013 VB7-30-01-F-03 GJL1311903R0101 VB7-30-10-F-01 GJL1311903R0102 VB7-30-10-F-02 GJL1311903R0103 VB7-30-10-F-03 GJL1311903R8010 VB7-30-01-F-80 GJL1311903R8014 VB7-30-01-F-84 GJL1311903R8015 VB7-30-01-F-85 GJL1311903R8100 VB7-30-10-F-80 GJL1311903R8104 VB7-30-10-F-84 GJL1311903R8105 VB7-30-10-F-85 GJL1311909R0011 VB7-30-01-P-01 GJL1311909R0012 VB7-30-01-P-02 GJL1311909R0013 VB7-30-01-P-03 GJL1311909R0101 VB7-30-10-P-01 GJL1311909R0102 VB7-30-10-P-02 GJL1311909R0103 VB7-30-10-P-03 GJL1311909R8010 VB7-30-01-P-80 GJL1311909R8014 VB7-30-01-P-84 GJL1311909R8015 VB7-30-01-P-85 GJL1311909R8100 VB7-30-10-P-80 GJL1311909R8104 VB7-30-10-P-84 GJL1311909R8105 VB7-30-10-P-85 GJL1311911R0011 VB7A-30-01-01 GJL1311911R0012 VB7A-30-01-02 GJL1311911R0013 VB7A-30-01-03 GJL1311911R0101 VB7A-30-10-01 GJL1311911R0102 VB7A-30-10-02 GJL1311911R0103 VB7A-30-10-03 GJL1311911R8010 VB7A-30-01-80 GJL1311911R8014 VB7A-30-01-84 GJL1311911R8015 VB7A-30-01-85 GJL1311911R8100 VB7A-30-10-80 GJL1311911R8104 VB7A-30-10-84 GJL1311911R8105 VB7A-30-10-85 GJL1311913R0011 VB7A-30-01-F-01 GJL1311913R0012 VB7A-30-01-F-02 GJL1311913R0013 VB7A-30-01-F-03 GJL1311913R0101 VB7A-30-10-F-01 GJL1311913R0102 VB7A-30-10-F-02 GJL1311913R0103 VB7A-30-10-F-03 Page Order code 3/4 3/4 3/29 3/29 3/29 3/29 3/29 3/29 3/29 3/29 3/29 3/29 3/29 3/29 3/19 3/19 3/19 3/19 3/19 3/19 3/19 3/19 3/19 3/19 3/19 3/19 3/12 3/12 3/12 3/12 3/12 3/12 3/12 3/12 3/12 3/12 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/6 3/31 3/31 3/31 3/31 3/31 3/31 3/31 3/31 3/31 3/31 3/31 3/31 3/21 3/21 3/21 3/21 3/21 3/21 3/21 3/21 3/21 3/21 3/21 3/21 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/33 3/33 3/33 3/33 3/33 3/33 GJL1311913R8010 VB7A-30-01-F-80 3/33 GJL1311913R8014 VB7A-30-01-F-84 3/33 GJL1311913R8015 VB7A-30-01-F-85 3/33 GJL1311913R8100 VB7A-30-10-F-80 3/33 GJL1311913R8104 VB7A-30-10-F-84 3/33 GJL1311913R8105 VB7A-30-10-F-85 3/33 GJL1311919R0011 VB7A-30-01-P-01 3/23 GJL1311919R0012 VB7A-30-01-P-02 3/23 GJL1311919R0013 VB7A-30-01-P-03 3/23 GJL1311919R0101 VB7A-30-10-P-01 3/23 GJL1311919R0102 VB7A-30-10-P-02 3/23 GJL1311919R0103 VB7A-30-10-P-03 3/23 GJL1311919R8010 VB7A-30-01-P-80 3/23 GJL1311919R8014 VB7A-30-01-P-84 3/23 GJL1311919R8015 VB7A-30-01-P-85 3/23 GJL1311919R8100 VB7A-30-10-P-80 3/23 GJL1311919R8104 VB7A-30-10-P-84 3/23 GJL1311919R8105 VB7A-30-10-P-85 3/23 GJL1313001R0011 BC7-30-01-01 3/5 GJL1313001R0013 BC7-30-01-03 3/5 GJL1313001R0014 BC7-30-01-04 3/5 GJL1313001R0015 BC7-30-01-05 3/5 GJL1313001R0017 BC7-30-01-07 3/5 GJL1313001R0101 BC7-30-10-01 3/5 GJL1313001R0104 BC7-30-10-04 3/5 GJL1313001R0105 BC7-30-10-05 3/5 GJL1313001R0107 BC7-30-10-07 3/5 GJL1313001R1016 BC7-30-01-16 3/5 GJL1313001R1103 BC7-30-10-03 3/5 GJL1313001R1106 BC7-30-10-16 3/5 GJL1313001R5011 BC7-30-01-2.4-51 3/10 GJL1313001R5101 BC7-30-10-2.4-51 3/10 GJL1313001R7011 B7S-30-01-1.7-71 3/10 GJL1313001R7012 B7S-30-01-2.8-72 3/10 GJL1313001R7101 B7S-30-10-1.7-71 3/10 GJL1313001R7102 B7S-30-10-2.8-72 3/10 GJL1313001R8011 BC7-30-01-1.4-81 3/10 GJL1313001R8101 BC7-30-10-1.4-81 3/10 GJL1313003R0011 BC7-30-01-F-01 3/30 GJL1313003R0013 BC7-30-01-F-03 3/30 GJL1313003R0014 BC7-30-01-F-04 3/30 GJL1313003R0015 BC7-30-01-F-05 3/30 GJL1313003R0017 BC7-30-01-F-07 3/30 GJL1313003R0101 BC7-30-10-F-01 3/30 GJL1313003R0103 BC7-30-10-F-03 3/30 GJL1313003R0104 BC7-30-10-F-04 3/30 GJL1313003R0105 BC7-30-10-F-05 3/30 GJL1313003R0107 BC7-30-10-F-07 3/30 GJL1313003R1016 BC7-30-01-F-16 3/30 GJL1313003R1106 BC7-30-10-F-16 3/30 GJL1313003R5011 BC7-30-01-F-2.4-51 3/35 GJL1313003R5101 BC7-30-10-F-2.4-51 3/35 GJL1313003R8011 BC7-30-01-F-1.4-81 3/35 GJL1313003R8101 BC7-30-10-F-1.4-81 3/35 GJL1313009R0011 BC7-30-01-P-01 3/20 GJL1313009R0013 BC7-30-01-P-03 3/20 GJL1313009R0014 BC7-30-01-P-04 3/20 GJL1313009R0015 BC7-30-01-P-05 3/20 GJL1313009R0017 BC7-30-01-P-07 3/20 GJL1313009R0101 BC7-30-10-P-01 3/20 GJL1313009R0103 BC7-30-10-P-03 3/20 GJL1313009R0104 BC7-30-10-P-04 3/20 GJL1313009R0105 BC7-30-10-P-05 3/20 GJL1313009R0107 BC7-30-10-P-07 3/20 GJL1313009R1016 BC7-30-01-P-16 3/20 GJL1313009R1106 BC7-30-10-P-16 3/20 GJL1313009R5011 BC7-30-01-P-2.4-51 3/27 GJL1313009R5101 BC7-30-10-P-2.4-51 3/27 GJL1313009R8011 BC7-30-01-P-1.4-81 3/27 GJL1313009R8101 BC7-30-10-P-1.4-81 3/27 GJL1313061R5011 TBC7-30-01-51 3/11 GJL1313061R5015 TBC7-30-01-55 3/11 GJL1313061R5101 TBC7-30-10-51 3/11 GJL1313061R5105 TBC7-30-10-55 3/11 GJL1313061R6012 TBC7-30-01-62 3/11 GJL1313061R6018 TBC7-30-01-68 3/11 GJL1313061R6102 TBC7-30-10-62 3/11 GJL1313061R6108 TBC7-30-10-68 3/11 GJL1313461R5005 TBC7-31-00-55 3/14 GJL1313461R6002 TBC7-31-00-62 3/14 GJL1313461R6008 TBC7-31-00-68 3/14 GJL1313561R5005 TBC7-22-00-55 3/14 GJL1313561R6002 TBC7-22-00-62 3/14 GJL1313561R6008 TBC7-22-00-68 3/14 GJL1313901R0011 VBC7-30-01-01 3/7 GJL1313901R0013 VBC7-30-01-03 3/7 GJL1313901R0014 VBC7-30-01-04 3/7 GJL1313901R0015 VBC7-30-01-05 3/7 GJL1313901R0017 VBC7-30-01-07 3/7 GJL1313901R0101 VBC7-30-10-01 3/7 Type Page Order code Type Page GJL1313901R0103 VBC7-30-10-03 3/7 GJL1313901R0104 VBC7-30-10-04 3/7 GJL1313901R0105 VBC7-30-10-05 3/7 GJL1313901R0107 VBC7-30-10-07 3/7 GJL1313901R1016 VBC7-30-01-16 3/7 GJL1313901R1106 VBC7-30-10-16 3/7 GJL1313903R0011 VBC7-30-01-F-01 3/32 GJL1313903R0013 VBC7-30-01-F-03 3/32 GJL1313903R0014 VBC7-30-01-F-04 3/32 GJL1313903R0015 VBC7-30-01-F-05 3/32 GJL1313903R0017 VBC7-30-01-F-07 3/32 GJL1313903R0101 VBC7-30-10-F-01 3/32 GJL1313903R0103 VBC7-30-10-F-03 3/32 GJL1313903R0104 VBC7-30-10-F-04 3/32 GJL1313903R0105 VBC7-30-10-F-05 3/32 GJL1313903R0107 VBC7-30-10-F-07 3/32 GJL1313903R1016 VBC7-30-01-F-16 3/32 GJL1313903R1106 VBC7-30-10-F-16 3/32 GJL1313909R0011 VBC7-30-01-P-01 3/22 GJL1313909R0013 VBC7-30-01-P-03 3/22 GJL1313909R0014 VBC7-30-01-P-04 3/22 GJL1313909R0015 VBC7-30-01-P-05 3/22 GJL1313909R0017 VBC7-30-01-P-07 3/22 GJL1313909R0101 VBC7-30-10-P-01 3/22 GJL1313909R0103 VBC7-30-10-P-03 3/22 GJL1313909R0104 VBC7-30-10-P-04 3/22 GJL1313909R0105 VBC7-30-10-P-05 3/22 GJL1313909R0107 VBC7-30-10-P-07 3/22 GJL1313909R1016 VBC7-30-01-P-16 3/22 GJL1313909R1106 VBC7-30-10-P-16 3/22 GJL1313911R0011 VBC7A-30-01-01 3/9 GJL1313911R0013 VBC7A-30-01-03 3/9 GJL1313911R0014 VBC7A-30-01-04 3/9 GJL1313911R0015 VBC7A-30-01-05 3/9 GJL1313911R0016 VBC7A-30-01-16 3/9 GJL1313911R0017 VBC7A-30-01-07 3/9 GJL1313911R0101 VBC7A-30-10-01 3/9 GJL1313911R0103 VBC7A-30-10-03 3/9 GJL1313911R0104 VBC7A-30-10-04 3/9 GJL1313911R0105 VBC7A-30-10-05 3/9 GJL1313911R0107 VBC7A-30-10-07 3/9 GJL1313911R1106 VBC7A-30-10-16 3/9 GJL1313913R0011 VBC7A-30-01-F-01 3/34 GJL1313913R0013 VBC7A-30-01-F-03 3/34 GJL1313913R0014 VBC7A-30-01-F-04 3/34 GJL1313913R0015 VBC7A-30-01-F-05 3/34 GJL1313913R0017 VBC7A-30-01-F-07 3/34 GJL1313913R0101 VBC7A-30-10-F-01 3/34 GJL1313913R0103 VBC7A-30-10-F-03 3/34 GJL1313913R0104 VBC7A-30-10-F-04 3/34 GJL1313913R0105 VBC7A-30-10-F-05 3/34 GJL1313913R0107 VBC7A-30-10-F-07 3/34 GJL1313913R1016 VBC7A-30-01-F-16 3/34 GJL1313913R1106 VBC7A-30-10-F-16 3/34 GJL1313919R0011 VBC7A-30-01-P-01 3/24 GJL1313919R0013 VBC7A-30-01-P-03 3/24 GJL1313919R0014 VBC7A-30-01-P-04 3/24 GJL1313919R0015 VBC7A-30-01-P-05 3/24 GJL1313919R0017 VBC7A-30-01-P-07 3/24 GJL1313919R0101 VBC7A-30-10-P-01 3/24 GJL1313919R0103 VBC7A-30-10-P-03 3/24 GJL1313919R0104 VBC7A-30-10-P-04 3/24 GJL1313919R0105 VBC7A-30-10-P-05 3/24 GJL1313919R0107 VBC7A-30-10-P-07 3/24 GJL1313919R1016 VBC7A-30-01-P-16 3/24 GJL1313919R1106 VBC7A-30-10-P-16 3/24 GJL1317001R0011 B7D-30-01-01 3/5 GJL1317001R0015 B7D-30-01-05 3/5 GJL1317001R0101 B7D-30-10-01 3/5 GJL1317001R0105 B7D-30-10-05 3/5 GJL1317201R0001 B7D-40-00-01 3/13 GJL1317201R0005 B7D-40-00-05 3/13 13 Index Order code ABB | 13/9 Index Type classification Type Page Type Order code Page Type Order code Page Index 13 Order code AA1-110 1SAM201910R1002 2/16 AF116-30-22-13 1SFL427001R1322 5/110 AF140-30-00B-11 1SFL447002R1100 5/88 AA1-230 1SAM201910R1003 2/16 AF116-30-22-14 1SFL427001R1422 5/110 AF140-30-00B-12 1SFL447002R1200 5/88 AA1-24 1SAM201910R1001 2/16 AF116-30-22-33 1SFL427001R3322 5/111 AF140-30-00B-13 1SFL447002R1300 5/88 AA1-400 1SAM201910R1004 2/16 AF116-30-22-34 1SFL427001R3422 5/111 AF140-30-00B-14 1SFL447002R1400 5/88 AA4-110 1SAM401907R1002 2/32 AF116-30-22B-11 1SFL427002R1122 5/110 AF140-30-00B-33 1SFL447002R3300 5/89 AA4-230 1SAM401907R1003 2/32 AF116-30-22B-12 1SFL427002R1222 5/110 AF140-30-00B-34 1SFL447002R3400 5/89 AA4-24 1SAM401907R1001 2/32 AF116-30-22B-13 1SFL427002R1322 5/110 AF140-30-11-11 1SFL447001R1111 5/94 AA4-400 1SAM401907R1004 2/32 AF116-30-22B-14 1SFL427002R1422 5/110 AF140-30-11-12 1SFL447001R1211 5/94 AF09-22-00-12 1SBL137501R1200 5/182 AF116-30-22B-33 1SFL427002R3322 5/111 AF140-30-11-13 1SFL447001R1311 5/94 AF09-22-00-13 1SBL137501R1300 5/182 AF116-30-22B-34 1SFL427002R3422 5/111 AF140-30-11-14 1SFL447001R1411 5/94 AF09-22-00-14 1SBL137501R1400 5/182 AF116-40-00-11 1SFL427101R1100 5/188 AF140-30-11-33 1SFL447001R3311 5/95 AF09-22-00-41 1SBL137501R4100 5/182 AF116-40-00-12 1SFL427101R1200 5/188 AF140-30-11-34 1SFL447001R3411 5/95 AF09-30-01-12 1SBL137001R1201 5/82 AF116-40-00-13 1SFL427101R1300 5/188 AF140-30-11B-11 1SFL447002R1111 5/94 AF09-30-01-13 1SBL137001R1301 5/82 AF116-40-00-14 1SFL427101R1400 5/188 AF140-30-11B-12 1SFL447002R1211 5/94 AF09-30-01-14 1SBL137001R1401 5/82 AF116-40-00B-11 1SFL427102R1100 5/188 AF140-30-11B-13 1SFL447002R1311 5/94 AF09-30-01-41 1SBL137001R4101 5/82 AF116-40-00B-12 1SFL427102R1200 5/188 AF140-30-11B-14 1SFL447002R1411 5/94 AF09-30-01S-12 1SBL137004R1201 6/46 AF116-40-00B-13 1SFL427102R1300 5/188 AF140-30-11B-33 1SFL447002R3311 5/95 AF09-30-01S-13 1SBL137004R1301 6/46 AF116-40-00B-14 1SFL427102R1400 5/188 AF140-30-11B-34 1SFL447002R3411 5/95 AF09-30-01S-14 1SBL137004R1401 6/46 AF116-40-11-11 1SFL427101R1111 5/192 AF140-30-22-11 1SFL447001R1122 5/110 AF09-30-01S-41 1SBL137004R4101 6/46 AF116-40-11-12 1SFL427101R1211 5/192 AF140-30-22-12 1SFL447001R1222 5/110 AF09-30-10-12 1SBL137001R1210 5/82 AF116-40-11-13 1SFL427101R1311 5/192 AF140-30-22-13 1SFL447001R1322 5/110 1SFL447001R1422 5/110 AF09-30-10-13 1SBL137001R1310 5/82 AF116-40-11-14 1SFL427101R1411 5/192 AF140-30-22-33 1SFL447001R3322 5/111 AF09-30-10-14 1SBL137001R1410 5/82 AF116-40-11B-11 1SFL427102R1111 5/192 1SFL447001R3422 5/111 AF09-30-10-41 1SBL137001R4110 5/82 AF116-40-11B-12 1SFL427102R1211 5/192 AF140-30-22B-11 1SFL447002R1122 5/110 AF09-30-10S-12 1SBL137004R1210 6/46 AF116-40-11B-13 1SFL427102R1311 5/192 AF140-30-22B-12 1SFL447002R1222 5/110 AF09-30-10S-13 1SBL137004R1310 6/46 AF116-40-11B-14 1SFL427102R1411 5/192 AF140-30-22B-13 1SFL447002R1322 5/110 AF09-30-10S-14 1SBL137004R1410 6/46 AF116-40-22-11 1SFL427101R1122 5/196 AF140-30-22B-14 1SFL447002R1422 5/110 AF09-30-10S-41 1SBL137004R4110 6/46 AF116-40-22-12 1SFL427101R1222 5/196 AF140-30-22B-33 1SFL447002R3322 5/111 AF09-30-22-12 1SBL137001R1222 5/104 AF116-40-22-13 1SFL427101R1322 5/196 AF140-30-22B-34 1SFL447002R3422 5/111 AF09-30-22-13 1SBL137001R1322 5/104 AF116-40-22-14 1SFL427101R1422 5/196 AF140-40-00-11 1SFL447101R1100 5/188 AF09-30-22-14 1SBL137001R1422 5/104 AF116-40-22B-11 1SFL427102R1122 5/196 AF140-40-00-12 1SFL447101R1200 5/188 AF09-30-22-41 1SBL137001R4122 5/104 AF116-40-22B-12 1SFL427102R1222 5/196 AF140-40-00-13 1SFL447101R1300 5/188 AF09-30-22S-12 1SBL137004R1222 6/48 AF116-40-22B-13 1SFL427102R1322 5/196 AF140-40-00-14 1SFL447101R1400 5/188 AF09-30-22S-13 1SBL137004R1322 6/48 AF116-40-22B-14 1SFL427102R1422 5/196 AF140-40-00B-11 1SFL447102R1100 5/188 AF09-30-22S-14 1SBL137004R1422 6/48 AF12-30-01-12 1SBL157001R1201 5/82 AF140-40-00B-12 1SFL447102R1200 5/188 AF09-30-22S-41 1SBL137004R4122 6/48 AF12-30-01-13 1SBL157001R1301 5/82 AF140-40-00B-13 1SFL447102R1300 5/188 AF09-40-00-12 1SBL137201R1200 5/182 AF12-30-01-14 1SBL157001R1401 5/82 AF140-40-00B-14 1SFL447102R1400 5/188 AF09-40-00-13 1SBL137201R1300 5/182 AF12-30-01-41 1SBL157001R4101 5/82 AF140-40-11-11 1SFL447101R1111 5/192 AF09-40-00-14 1SBL137201R1400 5/182 AF12-30-01S-12 1SBL157004R1201 6/46 AF140-40-11-12 1SFL447101R1211 5/192 AF09-40-00-41 1SBL137201R4100 5/182 AF12-30-01S-13 1SBL157004R1301 6/46 AF140-40-11-13 1SFL447101R1311 5/192 AF09Z-22-00-20 1SBL136501R2000 5/183 AF12-30-01S-14 1SBL157004R1401 6/46 AF140-40-11-14 1SFL447101R1411 5/192 AF09Z-22-00-21 1SBL136501R2100 5/183 AF12-30-01S-41 1SBL157004R4101 6/46 AF140-40-11B-11 1SFL447102R1111 5/192 AF09Z-22-00-22 1SBL136501R2200 5/183 AF12-30-10-12 1SBL157001R1210 5/82 AF140-40-11B-12 1SFL447102R1211 5/192 AF09Z-22-00-23 1SBL136501R2300 5/183 AF12-30-10-13 1SBL157001R1310 5/82 AF140-40-11B-13 1SFL447102R1311 5/192 AF09Z-30-01S-20 1SBL136004R2001 6/47 AF12-30-10-14 1SBL157001R1410 5/82 AF140-40-11B-14 1SFL447102R1411 5/192 AF09Z-30-01S-21 1SBL136004R2101 6/47 AF12-30-10-41 1SBL157001R4110 5/82 AF140-40-22-11 1SFL447101R1122 5/196 AF09Z-30-01S-22 1SBL136004R2201 6/47 AF12-30-10S-12 1SBL157004R1210 6/46 AF140-40-22-12 1SFL447101R1222 5/196 AF09Z-30-01S-23 1SBL136004R2301 6/47 AF12-30-10S-13 1SBL157004R1310 6/46 AF140-40-22-13 1SFL447101R1322 5/196 AF09Z-30-10S-20 1SBL136004R2010 6/47 AF12-30-10S-14 1SBL157004R1410 6/46 AF140-40-22-14 1SFL447101R1422 5/196 AF09Z-30-10S-21 1SBL136004R2110 6/47 AF12-30-10S-41 1SBL157004R4110 6/46 AF140-40-22B-11 1SFL447102R1122 5/196 AF09Z-30-10S-22 1SBL136004R2210 6/47 AF12-30-22-12 1SBL157001R1222 5/104 AF140-40-22B-12 1SFL447102R1222 5/196 AF09Z-30-10S-23 1SBL136004R2310 6/47 AF12-30-22-13 1SBL157001R1322 5/104 AF140-40-22B-13 1SFL447102R1322 5/196 AF09Z-30-22-20 1SBL136001R2022 5/105 AF12-30-22-14 1SBL157001R1422 5/104 AF140-40-22B-14 1SFL447102R1422 5/196 AF09Z-30-22-21 1SBL136001R2122 5/105 AF12-30-22-41 1SBL157001R4122 5/104 AF146-30-00-11 1SFL467001R1100 5/88 AF09Z-30-22-22 1SBL136001R2222 5/105 AF12-30-22S-12 1SBL157004R1222 6/48 AF146-30-00-12 1SFL467001R1200 5/88 AF09Z-30-22-23 1SBL136001R2322 5/105 AF12-30-22S-13 1SBL157004R1322 6/48 AF146-30-00-13 1SFL467001R1300 5/88 AF09Z-30-22S-20 1SBL136004R2022 6/49 AF12-30-22S-14 1SBL157004R1422 6/48 AF146-30-00-14 1SFL467001R1400 5/88 AF09Z-30-22S-21 1SBL136004R2122 6/49 AF12-30-22S-41 1SBL157004R4122 6/48 AF146-30-00-33 1SFL467001R3300 5/89 AF09Z-30-22S-22 1SBL136004R2222 6/49 AF1250-30-11 1SFL647001R6811 5/101 AF146-30-00-34 1SFL467001R3400 5/89 AF09Z-30-22S-23 1SBL136004R2322 6/49 1SFL647001R6911 5/101 AF146-30-00B-11 1SFL467002R1100 5/88 AF09Z-40-00-20 1SBL136201R2000 5/183 1SFL647001R7011 5/101 AF146-30-00B-12 1SFL467002R1200 5/88 AF09Z-40-00-21 1SBL136201R2100 5/183 1SFL647001R7111 5/101 AF146-30-00B-13 1SFL467002R1300 5/88 AF09Z-40-00-22 1SBL136201R2200 5/183 AF1250-30-22 1SFL647001R6822 5/117 AF146-30-00B-14 1SFL467002R1400 5/88 AF09Z-40-00-23 1SBL136201R2300 5/183 1SFL647001R6922 5/117 AF146-30-00B-33 1SFL467002R3300 5/89 AF116-30-00-11 1SFL427001R1100 5/88 1SFL647001R7022 5/117 AF146-30-00B-34 1SFL467002R3400 5/89 AF116-30-00-12 1SFL427001R1200 5/88 1SFL647001R7122 5/117 AF146-30-11-11 1SFL467001R1111 5/94 AF116-30-00-13 1SFL427001R1300 5/88 AF12Z-30-01S-20 1SBL156004R2001 6/47 AF146-30-11-12 1SFL467001R1211 5/94 AF116-30-00-14 1SFL427001R1400 5/88 AF12Z-30-01S-21 1SBL156004R2101 6/47 AF146-30-11-13 1SFL467001R1311 5/94 AF116-30-00-33 1SFL427001R3300 5/89 AF12Z-30-01S-22 1SBL156004R2201 6/47 AF146-30-11-14 1SFL467001R1411 5/94 AF116-30-00-34 1SFL427001R3400 5/89 AF12Z-30-01S-23 1SBL156004R2301 6/47 AF146-30-11-33 1SFL467001R3311 5/95 AF116-30-00B-11 1SFL427002R1100 5/88 AF12Z-30-10S-20 1SBL156004R2010 6/47 AF146-30-11-34 1SFL467001R3411 5/95 AF116-30-00B-12 1SFL427002R1200 5/88 AF12Z-30-10S-21 1SBL156004R2110 6/47 AF146-30-11B-11 1SFL467002R1111 5/94 AF116-30-00B-13 1SFL427002R1300 5/88 AF12Z-30-10S-22 1SBL156004R2210 6/47 AF146-30-11B-12 1SFL467002R1211 5/94 AF116-30-00B-14 1SFL427002R1400 5/88 AF12Z-30-10S-23 1SBL156004R2310 6/47 AF146-30-11B-13 1SFL467002R1311 5/94 AF116-30-00B-33 1SFL427002R3300 5/89 AF12Z-30-22-20 1SBL156001R2022 5/105 AF146-30-11B-14 1SFL467002R1411 5/94 AF116-30-00B-34 1SFL427002R3400 5/89 AF12Z-30-22-21 1SBL156001R2122 5/105 AF146-30-11B-33 1SFL467002R3311 5/95 AF116-30-11-11 1SFL427001R1111 5/94 AF12Z-30-22-22 1SBL156001R2222 5/105 AF146-30-22-11 1SFL467001R1122 5/110 AF116-30-11-12 1SFL427001R1211 5/94 AF12Z-30-22-23 1SBL156001R2322 5/105 AF146-30-22-12 1SFL467001R1222 5/110 AF116-30-11-13 1SFL427001R1311 5/94 AF12Z-30-22S-20 1SBL156004R2022 6/49 AF146-30-22-13 1SFL467001R1322 5/110 AF116-30-11-14 1SFL427001R1411 5/94 AF12Z-30-22S-21 1SBL156004R2122 6/49 AF146-30-22-14 1SFL467001R1422 5/110 AF116-30-11-33 1SFL427001R3311 5/95 AF12Z-30-22S-22 1SBL156004R2222 6/49 AF146-30-22-33 1SFL467001R3322 5/111 AF116-30-11-34 1SFL427001R3411 5/95 AF12Z-30-22S-23 1SBL156004R2322 6/49 AF146-30-22-34 1SFL467001R3422 5/111 AF116-30-11B-11 1SFL427002R1111 5/94 AF1350-30-11 1SFL657001R7011 5/101 AF146-30-22B-11 1SFL467002R1122 5/110 AF116-30-11B-12 1SFL427002R1211 5/94 AF1350-30-22 1SFL657001R7022 5/117 AF146-30-22B-12 1SFL467002R1222 5/110 AF116-30-11B-13 1SFL427002R1311 5/94 AF140-30-00-11 1SFL447001R1100 5/88 AF146-30-22B-13 1SFL467002R1322 5/110 AF116-30-11B-14 1SFL427002R1411 5/94 AF140-30-00-12 1SFL447001R1200 5/88 AF146-30-22B-14 1SFL467002R1422 5/110 AF116-30-11B-33 1SFL427002R3311 5/95 AF140-30-00-13 1SFL447001R1300 5/88 AF146-30-22B-33 1SFL467002R3322 5/111 AF116-30-11B-34 1SFL427002R3411 5/95 AF140-30-00-14 1SFL447001R1400 5/88 AF146-30-22B-34 1SFL467002R3422 5/111 AF116-30-22-11 1SFL427001R1122 5/110 AF140-30-00-33 1SFL447001R3300 5/89 AF16-22-00-12 1SBL177501R1200 5/182 AF116-30-22-12 1SFL427001R1222 5/110 AF140-30-00-34 1SFL447001R3400 5/89 13/10 | ABB Index Type classification Order code Page AF16-22-00-13 1SBL177501R1300 5/182 AF16-22-00-14 1SBL177501R1400 5/182 AF16-22-00-41 1SBL177501R4100 5/182 AF16-30-01-12 1SBL177001R1201 5/82 AF16-30-01-13 1SBL177001R1301 5/82 AF16-30-01-14 1SBL177001R1401 5/82 AF16-30-01-41 1SBL177001R4101 5/82 AF16-30-01S-12 1SBL177004R1201 6/46 AF16-30-01S-13 1SBL177004R1301 6/46 AF16-30-01S-14 1SBL177004R1401 6/46 AF16-30-01S-41 1SBL177004R4101 6/46 AF16-30-10-12 1SBL177001R1210 5/82 AF16-30-10-13 1SBL177001R1310 5/82 AF16-30-10-14 1SBL177001R1410 5/82 AF16-30-10-41 1SBL177001R4110 5/82 AF16-30-10S-12 1SBL177004R1210 6/46 AF16-30-10S-13 1SBL177004R1310 6/46 AF16-30-10S-14 1SBL177004R1410 6/46 AF16-30-10S-41 1SBL177004R4110 6/46 AF16-30-22-12 1SBL177001R1222 5/104 AF16-30-22-13 1SBL177001R1322 5/104 AF16-30-22-14 1SBL177001R1422 5/104 AF16-30-22-41 1SBL177001R4122 5/104 AF16-30-22S-12 1SBL177004R1222 6/48 AF16-30-22S-13 1SBL177004R1322 6/48 AF16-30-22S-14 1SBL177004R1422 6/48 AF16-30-22S-41 1SBL177004R4122 6/48 AF16-40-00-12 1SBL177201R1200 5/182 AF16-40-00-13 1SBL177201R1300 5/182 AF16-40-00-14 1SBL177201R1400 5/182 AF16-40-00-41 1SBL177201R4100 5/182 AF1650-30-11 1SFL677001R7011 5/101 AF1650-30-22 1SFL677001R7022 5/117 AF16Z-22-00-20 1SBL176501R2000 5/183 AF16Z-22-00-21 1SBL176501R2100 5/183 AF16Z-22-00-22 1SBL176501R2200 5/183 AF16Z-22-00-23 1SBL176501R2300 5/183 AF16Z-30-01S-20 1SBL176004R2001 6/47 AF16Z-30-01S-21 1SBL176004R2101 6/47 AF16Z-30-01S-22 1SBL176004R2201 6/47 AF16Z-30-01S-23 1SBL176004R2301 6/47 AF16Z-30-10S-20 1SBL176004R2010 6/47 AF16Z-30-10S-21 1SBL176004R2110 6/47 AF16Z-30-10S-22 1SBL176004R2210 6/47 AF16Z-30-10S-23 1SBL176004R2310 6/47 AF16Z-30-22-20 1SBL176001R2022 5/105 AF16Z-30-22-21 1SBL176001R2122 5/105 AF16Z-30-22-22 1SBL176001R2222 5/105 AF16Z-30-22-23 1SBL176001R2322 5/105 AF16Z-30-22S-20 1SBL176004R2022 6/49 AF16Z-30-22S-21 1SBL176004R2122 6/49 AF16Z-30-22S-22 1SBL176004R2222 6/49 AF16Z-30-22S-23 1SBL176004R2322 6/49 AF16Z-40-00-20 1SBL176201R2000 5/183 AF16Z-40-00-21 1SBL176201R2100 5/183 AF16Z-40-00-22 1SBL176201R2200 5/183 AF16Z-40-00-23 1SBL176201R2300 5/183 AF190-30-00-11 1SFL487002R1100 5/90 AF190-30-00-12 1SFL487002R1200 5/90 AF190-30-00-13 1SFL487002R1300 5/90 AF190-30-00-14 1SFL487002R1400 5/90 AF190-30-00-33 1SFL487002R3300 5/91 AF190-30-00-34 1SFL487002R3400 5/91 AF190-30-11-11 1SFL487002R1111 5/96 AF190-30-11-12 1SFL487002R1211 5/96 AF190-30-11-13 1SFL487002R1311 5/96 AF190-30-11-14 1SFL487002R1411 5/96 AF190-30-11-33 1SFL487002R3311 5/97 AF190-30-11-34 1SFL487002R3411 5/97 AF190-30-22-11 1SFL487002R1122 5/112 AF190-30-22-12 1SFL487002R1222 5/112 AF190-30-22-13 1SFL487002R1322 5/112 AF190-30-22-14 1SFL487002R1422 5/112 AF190-30-22-33 1SFL487002R3322 5/113 AF190-30-22-34 1SFL487002R3422 5/113 AF190-40-00-11 1SFL487102R1100 5/189 AF190-40-00-12 1SFL487102R1200 5/189 AF190-40-00-13 1SFL487102R1300 5/189 AF190-40-00-14 1SFL487102R1400 5/189 AF190-40-11-11 1SFL487102R1111 5/193 AF190-40-11-12 1SFL487102R1211 5/193 AF190-40-11-13 1SFL487102R1311 5/193 AF190-40-11-14 1SFL487102R1411 5/193 AF190-40-22-11 1SFL487102R1122 5/197 AF190-40-22-12 1SFL487102R1222 5/197 AF190-40-22-13 1SFL487102R1322 5/197 AF190-40-22-14 1SFL487102R1422 5/197 AF2050-30-11 1SFL707001R7011 5/101 AF2050-30-22 1SFL707001R7022 5/117 AF205-30-00-11 1SFL527002R1100 5/90 Type Order code Page AF205-30-00-12 1SFL527002R1200 5/90 AF205-30-00-13 1SFL527002R1300 5/90 AF205-30-00-14 1SFL527002R1400 5/90 AF205-30-00-33 1SFL527002R3300 5/91 AF205-30-00-34 1SFL527002R3400 5/91 AF205-30-11-11 1SFL527002R1111 5/96 AF205-30-11-12 1SFL527002R1211 5/96 AF205-30-11-13 1SFL527002R1311 5/96 AF205-30-11-14 1SFL527002R1411 5/96 AF205-30-11-33 1SFL527002R3311 5/97 AF205-30-11-34 1SFL527002R3411 5/97 AF205-30-22-11 1SFL527002R1122 5/112 AF205-30-22-12 1SFL527002R1222 5/112 AF205-30-22-13 1SFL527002R1322 5/112 AF205-30-22-14 1SFL527002R1422 5/112 AF205-30-22-33 1SFL527002R3322 5/113 AF205-30-22-34 1SFL527002R3422 5/113 AF205-40-00-11 1SFL527102R1100 5/189 AF205-40-00-12 1SFL527102R1200 5/189 AF205-40-00-13 1SFL527102R1300 5/189 AF205-40-00-14 1SFL527102R1400 5/189 AF205-40-11-11 1SFL527102R1111 5/193 AF205-40-11-12 1SFL527102R1211 5/193 AF205-40-11-13 1SFL527102R1311 5/193 AF205-40-11-14 1SFL527102R1411 5/193 AF205-40-22-11 1SFL527102R1122 5/197 AF205-40-22-12 1SFL527102R1222 5/197 AF205-40-22-13 1SFL527102R1322 5/197 AF205-40-22-14 1SFL527102R1422 5/197 AF26-22-00-12 1SBL237501R1200 5/182 AF26-22-00-13 1SBL237501R1300 5/182 AF26-22-00-14 1SBL237501R1400 5/182 AF26-22-00-41 1SBL237501R4100 5/182 AF26-30-00-12 1SBL237001R1200 5/82 AF26-30-00-13 1SBL237001R1300 5/82 AF26-30-00-14 1SBL237001R1400 5/82 AF26-30-00-41 1SBL237001R4100 5/82 AF26-30-00S-12 1SBL237004R1200 6/46 AF26-30-00S-13 1SBL237004R1300 6/46 AF26-30-00S-14 1SBL237004R1400 6/46 AF26-30-00S-41 1SBL237004R4100 6/46 AF26-30-11-12 1SBL237001R1211 5/104 AF26-30-11-13 1SBL237001R1311 5/104 AF26-30-11-14 1SBL237001R1411 5/104 AF26-30-11-41 1SBL237001R4111 5/104 AF26-30-11S-12 1SBL237004R1211 6/48 AF26-30-11S-13 1SBL237004R1311 6/48 AF26-30-11S-14 1SBL237004R1411 6/48 AF26-30-11S-41 1SBL237004R4111 6/48 AF26-30-22-12 1SBL237001R1222 5/104 AF26-30-22-13 1SBL237001R1322 5/104 AF26-30-22-14 1SBL237001R1422 5/104 AF26-30-22-41 1SBL237001R4122 5/104 AF26-30-22S-12 1SBL237004R1222 6/48 AF26-30-22S-13 1SBL237004R1322 6/48 AF26-30-22S-14 1SBL237004R1422 6/48 AF26-30-22S-41 1SBL237004R4122 6/48 AF26-40-00-12 1SBL237201R1200 5/182 AF26-40-00-13 1SBL237201R1300 5/182 AF26-40-00-14 1SBL237201R1400 5/182 AF26-40-00-41 1SBL237201R4100 5/182 AF2650-30-11 1SFL667001R7011 5/101 AF2650-30-22 1SFL667001R7022 5/117 AF265-30-00-11 1SFL547002R1100 5/90 AF265-30-00-12 1SFL547002R1200 5/90 AF265-30-00-13 1SFL547002R1300 5/90 AF265-30-00-14 1SFL547002R1400 5/90 AF265-30-00-33 1SFL547002R3300 5/91 AF265-30-00-34 1SFL547002R3400 5/91 AF265-30-11-11 1SFL547002R1111 5/96 AF265-30-11-12 1SFL547002R1211 5/96 AF265-30-11-13 1SFL547002R1311 5/96 AF265-30-11-14 1SFL547002R1411 5/96 AF265-30-11-33 1SFL547002R3311 5/97 AF265-30-11-34 1SFL547002R3411 5/97 AF265-30-22-11 1SFL547002R1122 5/112 AF265-30-22-12 1SFL547002R1222 5/112 AF265-30-22-13 1SFL547002R1322 5/112 AF265-30-22-14 1SFL547002R1422 5/112 AF265-30-22-33 1SFL547002R3322 5/113 AF265-30-22-34 1SFL547002R3422 5/113 AF265-40-00-11 1SFL547102R1100 5/189 AF265-40-00-12 1SFL547102R1200 5/189 AF265-40-00-13 1SFL547102R1300 5/189 AF265-40-00-14 1SFL547102R1400 5/189 AF265-40-11-11 1SFL547102R1111 5/193 AF265-40-11-12 1SFL547102R1211 5/193 AF265-40-11-13 1SFL547102R1311 5/193 AF265-40-11-14 1SFL547102R1411 5/193 AF265-40-22-11 1SFL547102R1122 5/197 Type Order code Page AF265-40-22-12 1SFL547102R1222 5/197 AF265-40-22-13 1SFL547102R1322 5/197 AF265-40-22-14 1SFL547102R1422 5/197 AF26Z-22-00-20 1SBL236501R2000 5/183 AF26Z-22-00-21 1SBL236501R2100 5/183 AF26Z-22-00-22 1SBL236501R2200 5/183 AF26Z-22-00-23 1SBL236501R2300 5/183 AF26Z-30-00S-20 1SBL236004R2000 6/47 AF26Z-30-00S-21 1SBL236004R2100 6/47 AF26Z-30-00S-22 1SBL236004R2200 6/47 AF26Z-30-00S-23 1SBL236004R2300 6/47 AF26Z-30-11-20 1SBL236001R2011 5/105 AF26Z-30-11-21 1SBL236001R2111 5/105 AF26Z-30-11-22 1SBL236001R2211 5/105 AF26Z-30-11-23 1SBL236001R2311 5/105 AF26Z-30-11S-20 1SBL236004R2011 6/49 AF26Z-30-11S-21 1SBL236004R2111 6/49 AF26Z-30-11S-22 1SBL236004R2211 6/49 AF26Z-30-11S-23 1SBL236004R2311 6/49 AF26Z-30-22-20 1SBL236001R2022 5/105 AF26Z-30-22-21 1SBL236001R2122 5/105 AF26Z-30-22-22 1SBL236001R2222 5/105 AF26Z-30-22-23 1SBL236001R2322 5/105 AF26Z-30-22S-20 1SBL236004R2022 6/49 AF26Z-30-22S-21 1SBL236004R2122 6/49 AF26Z-30-22S-22 1SBL236004R2222 6/49 AF26Z-30-22S-23 1SBL236004R2322 6/49 AF26Z-40-00-20 1SBL236201R2000 5/183 AF26Z-40-00-21 1SBL236201R2100 5/183 AF26Z-40-00-22 1SBL236201R2200 5/183 AF26Z-40-00-23 1SBL236201R2300 5/183 AF30-30-00-12 1SBL277001R1200 5/82 AF30-30-00-13 1SBL277001R1300 5/82 AF30-30-00-14 1SBL277001R1400 5/82 AF30-30-00-41 1SBL277001R4100 5/82 AF30-30-11-12 1SBL277001R1211 5/104 AF30-30-11-13 1SBL277001R1311 5/104 AF30-30-11-14 1SBL277001R1411 5/104 AF30-30-11-41 1SBL277001R4111 5/104 AF30-30-22-12 1SBL277001R1222 5/104 AF30-30-22-13 1SBL277001R1322 5/104 AF30-30-22-14 1SBL277001R1422 5/104 AF30-30-22-41 1SBL277001R4122 5/104 AF305-30-00-11 1SFL587002R1100 5/90 AF305-30-00-12 1SFL587002R1200 5/90 AF305-30-00-13 1SFL587002R1300 5/90 AF305-30-00-14 1SFL587002R1400 5/90 AF305-30-00-33 1SFL587002R3300 5/91 AF305-30-00-34 1SFL587002R3400 5/91 AF305-30-11-11 1SFL587002R1111 5/96 AF305-30-11-12 1SFL587002R1211 5/96 AF305-30-11-13 1SFL587002R1311 5/96 AF305-30-11-14 1SFL587002R1411 5/96 AF305-30-11-33 1SFL587002R3311 5/97 AF305-30-11-34 1SFL587002R3411 5/97 AF305-30-22-11 1SFL587002R1122 5/112 AF305-30-22-12 1SFL587002R1222 5/112 AF305-30-22-13 1SFL587002R1322 5/112 AF305-30-22-14 1SFL587002R1422 5/112 AF305-30-22-33 1SFL587002R3322 5/113 AF305-30-22-34 1SFL587002R3422 5/113 AF305-40-00-11 1SFL587102R1100 5/189 AF305-40-00-12 1SFL587102R1200 5/189 AF305-40-00-13 1SFL587102R1300 5/189 AF305-40-00-14 1SFL587102R1400 5/189 AF305-40-11-11 1SFL587102R1111 5/193 AF305-40-11-12 1SFL587102R1211 5/193 AF305-40-11-13 1SFL587102R1311 5/193 AF305-40-11-14 1SFL587102R1411 5/193 AF305-40-22-11 1SFL587102R1122 5/197 AF305-40-22-12 1SFL587102R1222 5/197 AF305-40-22-13 1SFL587102R1322 5/197 AF305-40-22-14 1SFL587102R1422 5/197 AF30Z-30-11-20 1SBL276001R2011 5/105 AF30Z-30-11-21 1SBL276001R2111 5/105 AF30Z-30-11-22 1SBL276001R2211 5/105 AF30Z-30-11-23 1SBL276001R2311 5/105 AF30Z-30-22-20 1SBL276001R2022 5/105 AF30Z-30-22-21 1SBL276001R2122 5/105 AF30Z-30-22-22 1SBL276001R2222 5/105 AF30Z-30-22-23 1SBL276001R2322 5/105 AF370-30-00-11 1SFL607002R1100 5/90 AF370-30-00-12 1SFL607002R1200 5/90 AF370-30-00-13 1SFL607002R1300 5/90 AF370-30-00-14 1SFL607002R1400 5/90 AF370-30-00-33 1SFL607002R3300 5/91 AF370-30-00-34 1SFL607002R3400 5/91 AF370-30-11-11 1SFL607002R1111 5/96 AF370-30-11-12 1SFL607002R1211 5/96 AF370-30-11-13 1SFL607002R1311 5/96 ABB | 13/11 13 Index Type Index Type classification 13 Order code Page Type Order code Page Type Order code Page AF370-30-11-14 1SFL607002R1411 5/96 AF460-30-11 1SFL597001R6811 5/100 AF96-30-11-12 1SBL407001R1211 5/107 AF370-30-11-33 1SFL607002R3311 5/97 1SFL597001R6911 5/100 AF96-30-11-13 1SBL407001R1311 5/107 AF370-30-11-34 1SFL607002R3411 5/97 1SFL597001R7011 5/100 AF96-30-11-14 1SBL407001R1411 5/107 AF370-30-22-11 1SFL607002R1122 5/112 1SFL597001R7111 5/100 AF96-30-11-41 1SBL407001R4111 5/107 AF370-30-22-12 1SFL607002R1222 5/112 AF460-30-22 1SFL597001R6822 5/116 AF96-30-22-11 1SBL407001R1122 5/107 AF370-30-22-13 1SFL607002R1322 5/112 1SFL597001R6922 5/116 AF96-30-22-12 1SBL407001R1222 5/107 AF370-30-22-14 1SFL607002R1422 5/112 1SFL597001R7022 5/116 AF96-30-22-13 1SBL407001R1322 5/107 AF370-30-22-33 1SFL607002R3322 5/113 1SFL597001R7122 5/116 AF96-30-22-14 1SBL407001R1422 5/107 AF370-30-22-34 1SFL607002R3422 5/113 AF52-30-00-11 1SBL367001R1100 5/84 AF96-30-22-41 1SBL407001R4122 5/107 AF370-40-00-11 1SFL607102R1100 5/189 AF52-30-00-12 1SBL367001R1200 5/84 AS09-30-01-16 1SBL101001R1601 4/32 AF370-40-00-12 1SFL607102R1200 5/189 AF52-30-00-13 1SBL367001R1300 5/84 AS09-30-01-20 1SBL101001R2001 4/32 AF370-40-00-13 1SFL607102R1300 5/189 AF52-30-00-14 1SBL367001R1400 5/84 AS09-30-01-26 1SBL101001R2601 4/32 AF370-40-00-14 1SFL607102R1400 5/189 AF52-30-00-41 1SBL367001R4100 5/84 AS09-30-01-28 1SBL101001R2801 4/32 AF370-40-11-11 1SFL607102R1111 5/193 AF52-30-11-11 1SBL367001R1111 5/106 AS09-30-01S-16 1SBL101004R1601 6/4 AF370-40-11-12 1SFL607102R1211 5/193 AF52-30-11-12 1SBL367001R1211 5/106 AS09-30-01S-20 1SBL101004R2001 6/4 AF370-40-11-13 1SFL607102R1311 5/193 AF52-30-11-13 1SBL367001R1311 5/106 AS09-30-01S-26 1SBL101004R2601 6/4 AF370-40-11-14 1SFL607102R1411 5/193 AF52-30-11-14 1SBL367001R1411 5/106 AS09-30-01S-28 1SBL101004R2801 6/4 AF370-40-22-11 1SFL607102R1122 5/197 AF52-30-11-41 1SBL367001R4111 5/106 AS09-30-10-16 1SBL101001R1610 4/32 AF370-40-22-12 1SFL607102R1222 5/197 AF52-30-22-11 1SBL367001R1122 5/106 AS09-30-10-20 1SBL101001R2010 4/32 AF370-40-22-13 1SFL607102R1322 5/197 AF52-30-22-12 1SBL367001R1222 5/106 AS09-30-10-26 1SBL101001R2610 4/32 AF370-40-22-14 1SFL607102R1422 5/197 AF52-30-22-13 1SBL367001R1322 5/106 AS09-30-10-28 1SBL101001R2810 4/32 AF38-22-00-12 1SBL297501R1200 5/182 AF52-30-22-14 1SBL367001R1422 5/106 AS09-30-10S-16 1SBL101004R1610 6/4 AF38-22-00-13 1SBL297501R1300 5/182 AF52-30-22-41 1SBL367001R4122 5/106 AS09-30-10S-20 1SBL101004R2010 6/4 AF38-22-00-14 1SBL297501R1400 5/182 AF52-40-00-11 1SBL367201R1100 5/184 AS09-30-10S-26 1SBL101004R2610 6/4 AF38-22-00-41 1SBL297501R4100 5/182 AF52-40-00-12 1SBL367201R1200 5/184 AS09-30-10S-28 1SBL101004R2810 6/4 AF38-30-00-12 1SBL297001R1200 5/82 AF52-40-00-13 1SBL367201R1300 5/184 AS09-30-32-16 1SBL101001R1632 4/34 AF38-30-00-13 1SBL297001R1300 5/82 AF52-40-00-14 1SBL367201R1400 5/184 AS09-30-32-20 1SBL101001R2032 4/34 AF38-30-00-14 1SBL297001R1400 5/82 AF52-40-00-41 1SBL367201R4100 5/184 AS09-30-32-26 1SBL101001R2632 4/34 AF38-30-00-41 1SBL297001R4100 5/82 AF580-30-11 1SFL617001R6811 5/100 AS09-30-32-28 1SBL101001R2832 4/34 AF38-30-11-12 1SBL297001R1211 5/104 1SFL617001R6911 5/100 AS09-30-32S-16 1SBL101004R1632 6/6 AF38-30-11-13 1SBL297001R1311 5/104 1SFL617001R7011 5/100 AS09-30-32S-20 1SBL101004R2032 6/6 AF38-30-11-14 1SBL297001R1411 5/104 1SFL617001R7111 5/100 AS09-30-32S-26 1SBL101004R2632 6/6 AF38-30-11-41 1SBL297001R4111 5/104 AF580-30-22 1SFL617001R6822 5/116 AS09-30-32S-28 1SBL101004R2832 6/6 AF38-30-22-12 1SBL297001R1222 5/104 1SFL617001R6922 5/116 AS12-30-01-16 1SBL111001R1601 4/32 AF38-30-22-13 1SBL297001R1322 5/104 1SFL617001R7022 5/116 AS12-30-01-20 1SBL111001R2001 4/32 AF38-30-22-14 1SBL297001R1422 5/104 1SFL617001R7122 5/116 AS12-30-01-26 1SBL111001R2601 4/32 AF38-30-22-41 1SBL297001R4122 5/104 AF65-30-00-11 1SBL387001R1100 5/84 AS12-30-01-28 1SBL111001R2801 4/32 AF38-40-00-12 1SBL297201R1200 5/182 AF65-30-00-12 1SBL387001R1200 5/84 AS12-30-01S-16 1SBL111004R1601 6/4 AF38-40-00-13 1SBL297201R1300 5/182 AF65-30-00-13 1SBL387001R1300 5/84 AS12-30-01S-20 1SBL111004R2001 6/4 AF38-40-00-14 1SBL297201R1400 5/182 AF65-30-00-14 1SBL387001R1400 5/84 AS12-30-01S-26 1SBL111004R2601 6/4 AF38-40-00-41 1SBL297201R4100 5/182 AF65-30-00-41 1SBL387001R4100 5/84 AS12-30-01S-28 1SBL111004R2801 6/4 AF38Z-22-00-20 1SBL296501R2000 5/183 AF65-30-11-11 1SBL387001R1111 5/106 AS12-30-10-16 1SBL111001R1610 4/32 AF38Z-22-00-21 1SBL296501R2100 5/183 AF65-30-11-12 1SBL387001R1211 5/106 AS12-30-10-20 1SBL111001R2010 4/32 AF38Z-22-00-22 1SBL296501R2200 5/183 AF65-30-11-13 1SBL387001R1311 5/106 AS12-30-10-26 1SBL111001R2610 4/32 AF38Z-22-00-23 1SBL296501R2300 5/183 AF65-30-11-14 1SBL387001R1411 5/106 AS12-30-10-28 1SBL111001R2810 4/32 AF38Z-30-11-20 1SBL296001R2011 5/105 AF65-30-11-41 1SBL387001R4111 5/106 AS12-30-10S-16 1SBL111004R1610 6/4 AF38Z-30-11-21 1SBL296001R2111 5/105 AF65-30-22-11 1SBL387001R1122 5/106 AS12-30-10S-20 1SBL111004R2010 6/4 AF38Z-30-11-22 1SBL296001R2211 5/105 AF65-30-22-12 1SBL387001R1222 5/106 AS12-30-10S-26 1SBL111004R2610 6/4 AF38Z-30-11-23 1SBL296001R2311 5/105 AF65-30-22-13 1SBL387001R1322 5/106 AS12-30-10S-28 1SBL111004R2810 6/4 AF38Z-30-22-20 1SBL296001R2022 5/105 AF65-30-22-14 1SBL387001R1422 5/106 AS12-30-32-16 1SBL111001R1632 4/34 AF38Z-30-22-21 1SBL296001R2122 5/105 AF65-30-22-41 1SBL387001R4122 5/106 AS12-30-32-20 1SBL111001R2032 4/34 AF38Z-30-22-22 1SBL296001R2222 5/105 AF750-30-11 1SFL637001R6811 5/100 AS12-30-32-26 1SBL111001R2632 4/34 AF38Z-30-22-23 1SBL296001R2322 5/105 1SFL637001R6911 5/100 AS12-30-32-28 1SBL111001R2832 4/34 AF38Z-40-00-20 1SBL296201R2000 5/183 1SFL637001R7011 5/100 AS12-30-32S-16 1SBL111004R1632 6/6 AF38Z-40-00-21 1SBL296201R2100 5/183 1SFL637001R7111 5/100 AS12-30-32S-20 1SBL111004R2032 6/6 AF38Z-40-00-22 1SBL296201R2200 5/183 AF750-30-22 1SFL637001R6822 5/116 AS12-30-32S-26 1SBL111004R2632 6/6 AF38Z-40-00-23 1SBL296201R2300 5/183 1SFL637001R6922 5/116 AS12-30-32S-28 1SBL111004R2832 6/6 AF400-30-11 1SFL577001R6811 5/100 1SFL637001R7022 5/116 AS16-30-01-16 1SBL121001R1601 4/32 1SFL577001R6911 5/100 1SFL637001R7122 5/116 AS16-30-01-20 1SBL121001R2001 4/32 1SFL577001R7011 5/100 AF80-22-00-11 1SBL397501R1100 5/184 AS16-30-01-26 1SBL121001R2601 4/32 1SFL577001R7111 5/100 AF80-22-00-12 1SBL397501R1200 5/184 AS16-30-01-28 1SBL121001R2801 4/32 AF400-30-22 1SFL577001R6822 5/116 AF80-22-00-13 1SBL397501R1300 5/184 AS16-30-01S-16 1SBL121004R1601 6/4 1SFL577001R6922 5/116 AF80-22-00-14 1SBL397501R1400 5/184 AS16-30-01S-20 1SBL121004R2001 6/4 1SFL577001R7022 5/116 AF80-22-00-41 1SBL397501R4100 5/184 AS16-30-01S-26 1SBL121004R2601 6/4 1SFL577001R7122 5/116 AF80-30-00-11 1SBL397001R1100 5/84 AS16-30-01S-28 1SBL121004R2801 6/4 AF40-22-00-11 1SBL347501R1100 5/184 AF80-30-00-12 1SBL397001R1200 5/84 AS16-30-10-16 1SBL121001R1610 4/32 AF40-22-00-12 1SBL347501R1200 5/184 AF80-30-00-13 1SBL397001R1300 5/84 AS16-30-10-20 1SBL121001R2010 4/32 AF40-22-00-13 1SBL347501R1300 5/184 AF80-30-00-14 1SBL397001R1400 5/84 AS16-30-10-26 1SBL121001R2610 4/32 AF40-22-00-14 1SBL347501R1400 5/184 AF80-30-00-41 1SBL397001R4100 5/84 AS16-30-10-28 1SBL121001R2810 4/32 AF40-22-00-41 1SBL347501R4100 5/184 AF80-30-11-11 1SBL397001R1111 5/107 AS16-30-10S-16 1SBL121004R1610 6/4 AF40-30-00-11 1SBL347001R1100 5/84 AF80-30-11-12 1SBL397001R1211 5/107 AS16-30-10S-20 1SBL121004R2010 6/4 AF40-30-00-12 1SBL347001R1200 5/84 AF80-30-11-13 1SBL397001R1311 5/107 AS16-30-10S-26 1SBL121004R2610 6/4 AF40-30-00-13 1SBL347001R1300 5/84 AF80-30-11-14 1SBL397001R1411 5/107 AS16-30-10S-28 1SBL121004R2810 6/4 AF40-30-00-14 1SBL347001R1400 5/84 AF80-30-11-41 1SBL397001R4111 5/107 AS16-30-32-16 1SBL121001R1632 4/34 AF40-30-00-41 1SBL347001R4100 5/84 AF80-30-22-11 1SBL397001R1122 5/107 AS16-30-32-20 1SBL121001R2032 4/34 AF40-30-11-11 1SBL347001R1111 5/106 AF80-30-22-12 1SBL397001R1222 5/107 AS16-30-32-26 1SBL121001R2632 4/34 AF40-30-11-12 1SBL347001R1211 5/106 AF80-30-22-13 1SBL397001R1322 5/107 AS16-30-32-28 1SBL121001R2832 4/34 AF40-30-11-13 1SBL347001R1311 5/106 AF80-30-22-14 1SBL397001R1422 5/107 AS16-30-32S-16 1SBL121004R1632 6/6 AF40-30-11-14 1SBL347001R1411 5/106 AF80-30-22-41 1SBL397001R4122 5/107 AS16-30-32S-20 1SBL121004R2032 6/6 AF40-30-11-41 1SBL347001R4111 5/106 AF80-40-00-11 1SBL397201R1100 5/184 AS16-30-32S-26 1SBL121004R2632 6/6 AF40-30-22-11 1SBL347001R1122 5/106 AF80-40-00-12 1SBL397201R1200 5/184 AS16-30-32S-28 1SBL121004R2832 6/6 AF40-30-22-12 1SBL347001R1222 5/106 AF80-40-00-13 1SBL397201R1300 5/184 ASL09-30-01-81 1SBL103001R8101 4/33 AF40-30-22-13 1SBL347001R1322 5/106 AF80-40-00-14 1SBL397201R1400 5/184 ASL09-30-01-83 1SBL103001R8301 4/33 AF40-30-22-14 1SBL347001R1422 5/106 AF80-40-00-41 1SBL397201R4100 5/184 ASL09-30-01-86 1SBL103001R8601 4/33 AF40-30-22-41 1SBL347001R4122 5/106 AF96-30-00-11 1SBL407001R1100 5/84 ASL09-30-01-88 1SBL103001R8801 4/33 AF40-40-00-11 1SBL347201R1100 5/184 AF96-30-00-12 1SBL407001R1200 5/84 ASL09-30-01S-81 1SBL103004R8101 6/5 AF40-40-00-12 1SBL347201R1200 5/184 AF96-30-00-13 1SBL407001R1300 5/84 ASL09-30-01S-83 1SBL103004R8301 6/5 AF40-40-00-13 1SBL347201R1300 5/184 AF96-30-00-14 1SBL407001R1400 5/84 ASL09-30-01S-86 1SBL103004R8601 6/5 AF40-40-00-14 1SBL347201R1400 5/184 AF96-30-00-41 1SBL407001R4100 5/84 ASL09-30-01S-88 1SBL103004R8801 6/5 AF40-40-00-41 1SBL347201R4100 5/184 AF96-30-11-11 1SBL407001R1111 5/107 ASL09-30-10-81 1SBL103001R8110 4/33 13/12 | ABB Index Type Index Type classification Order code Page ASL09-30-10-83 1SBL103001R8310 4/33 ASL09-30-10-86 1SBL103001R8610 4/33 ASL09-30-10-88 1SBL103001R8810 4/33 ASL09-30-10S-81 1SBL103004R8110 6/5 ASL09-30-10S-83 1SBL103004R8310 6/5 ASL09-30-10S-86 1SBL103004R8610 6/5 ASL09-30-10S-88 1SBL103004R8810 6/5 ASL09-30-32-81 1SBL103001R8132 4/35 ASL09-30-32-83 1SBL103001R8332 4/35 ASL09-30-32-86 1SBL103001R8632 4/35 ASL09-30-32-88 1SBL103001R8832 4/35 ASL09-30-32S-81 1SBL103004R8132 6/7 ASL09-30-32S-83 1SBL103004R8332 6/7 ASL09-30-32S-86 1SBL103004R8632 6/7 ASL09-30-32S-88 1SBL103004R8832 6/7 ASL12-30-01-81 1SBL113001R8101 4/33 ASL12-30-01-83 1SBL113001R8301 4/33 ASL12-30-01-86 1SBL113001R8601 4/33 ASL12-30-01-88 1SBL113001R8801 4/33 ASL12-30-01S-81 1SBL113004R8101 6/5 ASL12-30-01S-83 1SBL113004R8301 6/5 ASL12-30-01S-86 1SBL113004R8601 6/5 ASL12-30-01S-88 1SBL113004R8801 6/5 ASL12-30-10-81 1SBL113001R8110 4/33 ASL12-30-10-83 1SBL113001R8310 4/33 ASL12-30-10-86 1SBL113001R8610 4/33 ASL12-30-10-88 1SBL113001R8810 4/33 ASL12-30-10S-81 1SBL113004R8110 6/5 ASL12-30-10S-83 1SBL113004R8310 6/5 ASL12-30-10S-86 1SBL113004R8610 6/5 ASL12-30-10S-88 1SBL113004R8810 6/5 ASL12-30-32-81 1SBL113001R8132 4/35 ASL12-30-32-83 1SBL113001R8332 4/35 ASL12-30-32-86 1SBL113001R8632 4/35 ASL12-30-32-88 1SBL113001R8832 4/35 ASL12-30-32S-81 1SBL113004R8132 6/7 ASL12-30-32S-83 1SBL113004R8332 6/7 ASL12-30-32S-86 1SBL113004R8632 6/7 ASL12-30-32S-88 1SBL113004R8832 6/7 ASL16-30-01-81 1SBL123001R8101 4/33 ASL16-30-01-83 1SBL123001R8301 4/33 ASL16-30-01-86 1SBL123001R8601 4/33 ASL16-30-01-88 1SBL123001R8801 4/33 ASL16-30-01S-81 1SBL123004R8101 6/5 ASL16-30-01S-83 1SBL123004R8301 6/5 ASL16-30-01S-86 1SBL123004R8601 6/5 ASL16-30-01S-88 1SBL123004R8801 6/5 ASL16-30-10-81 1SBL123001R8110 4/33 ASL16-30-10-83 1SBL123001R8310 4/33 ASL16-30-10-86 1SBL123001R8610 4/33 ASL16-30-10-88 1SBL123001R8810 4/33 ASL16-30-10S-81 1SBL123004R8110 6/5 ASL16-30-10S-83 1SBL123004R8310 6/5 ASL16-30-10S-86 1SBL123004R8610 6/5 ASL16-30-10S-88 1SBL123004R8810 6/5 ASL16-30-32-81 1SBL123001R8132 4/35 ASL16-30-32-83 1SBL123001R8332 4/35 ASL16-30-32-86 1SBL123001R8632 4/35 ASL16-30-32-88 1SBL123001R8832 4/35 ASL16-30-32S-81 1SBL123004R8132 6/7 ASL16-30-32S-83 1SBL123004R8332 6/7 ASL16-30-32S-86 1SBL123004R8632 6/7 ASL16-30-32S-88 1SBL123004R8832 6/7 B6-22-00-01 GJL1211501R0001 3/12 B6-22-00-02 GJL1211501R0002 3/12 B6-22-00-03 GJL1211501R0003 3/12 B6-22-00-80 GJL1211501R8000 3/12 B6-22-00-84 GJL1211501R8004 3/12 B6-30-01-01 GJL1211001R0011 3/4 B6-30-01-02 GJL1211001R0012 3/4 B6-30-01-03 GJL1211001R0013 3/4 B6-30-01-80 GJL1211001R8010 3/4 B6-30-01-84 GJL1211001R8014 3/4 B6-30-01-85 GJL1211001R8015 3/4 B6-30-01-F-01 GJL1211003R0011 3/29 B6-30-01-F-02 GJL1211003R0012 3/29 B6-30-01-F-03 GJL1211003R0013 3/29 B6-30-01-F-80 GJL1211003R8010 3/29 B6-30-01-F-84 GJL1211003R8014 3/29 B6-30-01-F-85 GJL1211003R8015 3/29 B6-30-01-P-01 GJL1211009R0011 3/19 B6-30-01-P-02 GJL1211009R0012 3/19 B6-30-01-P-03 GJL1211009R0013 3/19 B6-30-01-P-80 GJL1211009R8010 3/19 B6-30-01-P-84 GJL1211009R8014 3/19 B6-30-01-P-85 GJL1211009R8015 3/19 B6-30-10-01 GJL1211001R0101 3/4 B6-30-10-02 GJL1211001R0102 3/4 B6-30-10-03 GJL1211001R0103 3/4 B6-30-10-80 GJL1211001R8100 3/4 Type Order code Page Type Order code Page B6-30-10-84 GJL1211001R8104 3/4 BC6-22-00-03 GJL1213501R0003 3/13 B6-30-10-85 GJL1211001R8105 3/4 BC6-22-00-04 GJL1213501R0004 3/13 B6-30-10-F-01 GJL1211003R0101 3/29 BC6-22-00-05 GJL1213501R0005 3/13 B6-30-10-F-02 GJL1211003R0102 3/29 BC6-22-00-07 GJL1213501R0007 3/13 B6-30-10-F-03 GJL1211003R0103 3/29 BC6-22-00-16 GJL1213501R1006 3/13 B6-30-10-F-80 GJL1211003R8100 3/29 BC6-30-01-01 GJL1213001R0011 3/5 B6-30-10-F-84 GJL1211003R8104 3/29 BC6-30-01-03 GJL1213001R0013 3/5 B6-30-10-F-85 GJL1211003R8105 3/29 BC6-30-01-04 GJL1213001R0014 3/5 B6-30-10-P-01 GJL1211009R0101 3/19 BC6-30-01-05 GJL1213001R0015 3/5 B6-30-10-P-02 GJL1211009R0102 3/19 BC6-30-01-07 GJL1213001R0017 3/5 B6-30-10-P-03 GJL1211009R0103 3/19 BC6-30-01-1.4-81 GJL1213001R8011 3/10 B6-30-10-P-80 GJL1211009R8100 3/19 BC6-30-01-16 GJL1213001R1016 3/5 B6-30-10-P-84 GJL1211009R8104 3/19 BC6-30-01-2.4-51 GJL1213001R5011 3/10 B6-30-10-P-85 GJL1211009R8105 3/19 BC6-30-01-F-01 GJL1213003R0011 3/30 B6-40-00-01 GJL1211201R0001 3/12 BC6-30-01-F-03 GJL1213003R0013 3/30 B6-40-00-02 GJL1211201R0002 3/12 BC6-30-01-F-04 GJL1213003R0014 3/30 B6-40-00-03 GJL1211201R0003 3/12 BC6-30-01-F-05 GJL1213003R0015 3/30 B6-40-00-80 GJL1211201R8000 3/12 BC6-30-01-F-07 GJL1213003R0017 3/30 B6-40-00-84 GJL1211201R8004 3/12 BC6-30-01-F-1.4-81 GJL1213003R8011 3/35 B6S-30-01-1.7-71 GJL1213001R7011 3/10 BC6-30-01-F-16 GJL1213003R1016 3/30 B6S-30-01-2.8-72 GJL1213001R7012 3/10 BC6-30-01-F-2.4-51 GJL1213003R5011 3/35 B6S-30-10-1.7-71 GJL1213001R7101 3/10 BC6-30-01-P-01 GJL1213009R0011 3/20 B6S-30-10-2.8-72 GJL1213001R7102 3/10 BC6-30-01-P-03 GJL1213009R0013 3/20 B7-22-00-01 GJL1311501R0001 3/12 BC6-30-01-P-04 GJL1213009R0014 3/20 B7-22-00-02 GJL1311501R0002 3/12 BC6-30-01-P-05 GJL1213009R0015 3/20 B7-22-00-03 GJL1311501R0003 3/12 BC6-30-01-P-07 GJL1213009R0017 3/20 B7-22-00-80 GJL1311501R8000 3/12 BC6-30-01-P-1.4-81 GJL1213009R8011 3/27 B7-22-00-84 GJL1311501R8004 3/12 BC6-30-01-P-16 GJL1213009R1016 3/20 B7-30-01-01 GJL1311001R0011 3/4 BC6-30-01-P-2.4-51 GJL1213009R5011 3/27 B7-30-01-02 GJL1311001R0012 3/4 BC6-30-10-01 GJL1213001R0101 3/5 B7-30-01-03 GJL1311001R0013 3/4 BC6-30-10-03 GJL1213001R0103 3/5 B7-30-01-80 GJL1311001R8010 3/4 BC6-30-10-04 GJL1213001R0104 3/5 B7-30-01-84 GJL1311001R8014 3/4 BC6-30-10-05 GJL1213001R0105 3/5 B7-30-01-85 GJL1311001R8015 3/4 BC6-30-10-07 GJL1213001R0107 3/5 B7-30-01-F-01 GJL1311003R0011 3/29 BC6-30-10-1.4-81 GJL1213001R8101 3/10 B7-30-01-F-02 GJL1311003R0012 3/29 BC6-30-10-16 GJL1213001R1106 3/5 B7-30-01-F-03 GJL1311003R0013 3/29 BC6-30-10-2.4-51 GJL1213001R5101 3/10 B7-30-01-F-80 GJL1311003R8010 3/29 BC6-30-10-F-01 GJL1213003R0101 3/30 B7-30-01-F-84 GJL1311003R8014 3/29 BC6-30-10-F-03 GJL1213003R0103 3/30 B7-30-01-F-85 GJL1311003R8015 3/29 BC6-30-10-F-04 GJL1213003R0104 3/30 B7-30-01-P-01 GJL1311009R0011 3/19 BC6-30-10-F-05 GJL1213003R0105 3/30 B7-30-01-P-02 GJL1311009R0012 3/19 BC6-30-10-F-07 GJL1213003R0107 3/30 B7-30-01-P-03 GJL1311009R0013 3/19 BC6-30-10-F-1.4-81 GJL1213003R8101 3/35 B7-30-01-P-80 GJL1311009R8010 3/19 BC6-30-10-F-16 GJL1213003R1106 3/30 B7-30-01-P-84 GJL1311009R8014 3/19 BC6-30-10-F-2.4-51 GJL1213003R5101 3/35 B7-30-01-P-85 GJL1311009R8015 3/19 BC6-30-10-P-01 GJL1213009R0101 3/20 B7-30-10-01 GJL1311001R0101 3/4 BC6-30-10-P-03 GJL1213009R0103 3/20 B7-30-10-02 GJL1311001R0102 3/4 BC6-30-10-P-04 GJL1213009R0104 3/20 B7-30-10-03 GJL1311001R0103 3/4 BC6-30-10-P-05 GJL1213009R0105 3/20 B7-30-10-80 GJL1311001R8100 3/4 BC6-30-10-P-07 GJL1213009R0107 3/20 B7-30-10-84 GJL1311001R8104 3/4 BC6-30-10-P-1.4-81 GJL1213009R8101 3/27 B7-30-10-85 GJL1311001R8105 3/4 BC6-30-10-P-16 GJL1213009R1106 3/20 B7-30-10-F-01 GJL1311003R0101 3/29 BC6-30-10-P-2.4-51 GJL1213009R5101 3/27 B7-30-10-F-02 GJL1311003R0102 3/29 BC7-30-01-01 GJL1313001R0011 3/5 B7-30-10-F-03 GJL1311003R0103 3/29 BC7-30-01-03 GJL1313001R0013 3/5 B7-30-10-F-80 GJL1311003R8100 3/29 BC7-30-01-04 GJL1313001R0014 3/5 B7-30-10-F-84 GJL1311003R8104 3/29 BC7-30-01-05 GJL1313001R0015 3/5 B7-30-10-F-85 GJL1311003R8105 3/29 BC7-30-01-07 GJL1313001R0017 3/5 B7-30-10-P-01 GJL1311009R0101 3/19 BC7-30-01-1.4-81 GJL1313001R8011 3/10 B7-30-10-P-02 GJL1311009R0102 3/19 BC7-30-01-16 GJL1313001R1016 3/5 B7-30-10-P-03 GJL1311009R0103 3/19 BC7-30-01-2.4-51 GJL1313001R5011 3/10 B7-30-10-P-80 GJL1311009R8100 3/19 BC7-30-01-F-01 GJL1313003R0011 3/30 B7-30-10-P-84 GJL1311009R8104 3/19 BC7-30-01-F-03 GJL1313003R0013 3/30 B7-30-10-P-85 GJL1311009R8105 3/19 BC7-30-01-F-04 GJL1313003R0014 3/30 B7-40-00-01 GJL1311201R0001 3/12 BC7-30-01-F-05 GJL1313003R0015 3/30 B7-40-00-02 GJL1311201R0002 3/12 BC7-30-01-F-07 GJL1313003R0017 3/30 B7-40-00-03 GJL1311201R0003 3/12 BC7-30-01-F-1.4-81 GJL1313003R8011 3/35 B7-40-00-80 GJL1311201R8000 3/12 BC7-30-01-F-16 GJL1313003R1016 3/30 B7-40-00-84 GJL1311201R8004 3/12 BC7-30-01-F-2.4-51 GJL1313003R5011 3/35 B7D-30-01-01 GJL1317001R0011 3/5 BC7-30-01-P-01 GJL1313009R0011 3/20 B7D-30-01-05 GJL1317001R0015 3/5 BC7-30-01-P-03 GJL1313009R0013 3/20 B7D-30-10-01 GJL1317001R0101 3/5 BC7-30-01-P-04 GJL1313009R0014 3/20 B7D-30-10-05 GJL1317001R0105 3/5 BC7-30-01-P-05 GJL1313009R0015 3/20 B7D-40-00-01 GJL1317201R0001 3/13 BC7-30-01-P-07 GJL1313009R0017 3/20 B7D-40-00-05 GJL1317201R0005 3/13 BC7-30-01-P-1.4-81 GJL1313009R8011 3/27 B7S-30-01-1.7-71 GJL1313001R7011 3/10 BC7-30-01-P-16 GJL1313009R1016 3/20 B7S-30-01-2.8-72 GJL1313001R7012 3/10 BC7-30-01-P-2.4-51 GJL1313009R5011 3/27 B7S-30-10-1.7-71 GJL1313001R7101 3/10 BC7-30-10-01 GJL1313001R0101 3/5 B7S-30-10-2.8-72 GJL1313001R7102 3/10 BC7-30-10-03 GJL1313001R1103 3/5 BA4 1SNA235156R2700 4/82 BC7-30-10-04 GJL1313001R0104 3/5 BA5-50 1SBN110000R1000 3/39 BC7-30-10-05 GJL1313001R0105 3/5 BB3 1SBN111020R1000 4/82 BC7-30-10-07 GJL1313001R0107 3/5 BB4 1SBN110120W1000 5/338 BC7-30-10-1.4-81 GJL1313001R8101 3/10 BC6-21-10-P-01 GJL1213109R0101 3/20 BC7-30-10-16 GJL1313001R1106 3/5 BC6-21-10-P-03 GJL1213109R0103 3/20 BC7-30-10-2.4-51 GJL1313001R5101 3/10 BC6-21-10-P-04 GJL1213109R0104 3/20 BC7-30-10-F-01 GJL1313003R0101 3/30 BC6-21-10-P-05 GJL1213109R0105 3/20 BC7-30-10-F-03 GJL1313003R0103 3/30 BC6-21-10-P-16 GJL1213109R1106 3/20 BC7-30-10-F-04 GJL1313003R0104 3/30 BC6-22-00-01 GJL1213501R0001 3/13 BC7-30-10-F-05 GJL1313003R0105 3/30 BC6-22-00-02 GJL1213501R0002 3/13 BC7-30-10-F-07 GJL1313003R0107 3/30 ABB | 13/13 13 Index Type Index Type classification Type Page Type Order code Page Type Order code Page Index 13 Order code BC7-30-10-F-1.4-81 GJL1313003R8101 3/35 CA4-22M 1SBN010140R1122 5/87 DB200 1SAZ401110R0001 7/24 BC7-30-10-F-16 GJL1313003R1106 3/30 CA4-22MS 1SBN010145R1122 6/51 DB42 1SAZ701902R0001 7/8 BC7-30-10-F-2.4-51 GJL1313003R5101 3/35 CA4-22N 1SBN010140R1222 5/307 DB45E 1SAX201110R1001 7/32 BC7-30-10-P-01 GJL1313009R0101 3/20 CA4-22NS 1SBN010145R1222 6/73 DB80E 1SAX301110R1001 7/32 BC7-30-10-P-03 GJL1313009R0103 3/20 CA4-22U 1SBN010140R1322 5/87 DMS132-G 1SAM201912R1010 2/22 BC7-30-10-P-04 GJL1313009R0104 3/20 CA4-31E 1SBN010140R1031 5/187 DMS132-Y 1SAM201912R1011 2/22 BC7-30-10-P-05 GJL1313009R0105 3/20 CA4-31ES 1SBN010145R1031 6/51 DRAS09-20S 1SBK104235R2000 8/2 BC7-30-10-P-07 GJL1313009R0107 3/20 CA4-31M 1SBN010140R1131 5/322 DRAS09-26N 1SBK104135R2600 8/2 BC7-30-10-P-1.4-81 GJL1313009R8101 3/27 CA4-31MS 1SBN010145R1131 6/51 DRAS09-27N 1SBK104135R2700 8/2 BC7-30-10-P-16 GJL1313009R1106 3/20 CA4-31N 1SBN010140R1231 5/307 DRAS09-28P 1SBK104035R2800 8/2 BC7-30-10-P-2.4-51 GJL1313009R5101 3/27 CA4-31NS 1SBN010145R1231 6/73 DRAS09-29P 1SBK104035R2900 8/2 BDT4 1SBN110122T1000 4/82 CA4-31U 1SBN010140R1331 5/322 DRAS12-20S 1SBK114235R2000 8/2 BEA140/XT2 1SFN084206R1000 5/352 CA4-40E 1SBN010140R1040 5/187 DRAS12-26N 1SBK114135R2600 8/2 BEA140/XT4 1SFN084206R1001 5/352 CA4-40ES 1SBN010145R1040 6/51 DRAS12-27N 1SBK114135R2700 8/2 BEA16-3 1SBN081006T1000 4/37 CA4-40N 1SBN010140R1240 5/307 DRAS12-28P 1SBK114035R2800 8/2 BEA16-3U 1SBN081020R1000 6/9 CA4-40NS 1SBN010145R1240 6/73 DRAS12-29P 1SBK114035R2900 8/2 BEA16-4 1SBN081306T1000 5/87 CA4-40U 1SBN010140R1340 5/322 DRAS16-20S 1SBK124235R2000 8/2 BEA205/T4 1SFN084806R1001 5/352 CA5-01 1SBN010010R1001 5/358 DRAS16-26N 1SBK124135R2600 8/2 BEA205/XT4 1SFN084806R1000 5/352 CA5-04E 1SBN010040R1004 5/358 DRAS16-27N 1SBK124135R2700 8/2 BEA26-4 1SBN082306T1000 5/87 CA5-04M 1SBN010040R1104 5/358 DRAS16-28P 1SBK124035R2800 8/2 BEA370/T5 1SFN085406R1000 5/352 CA5-10 1SBN010010R1010 5/358 DRAS16-29P 1SBK124035R2900 8/2 BEA38-4 1SBN082306T2000 5/87 CA5-11/11E 1SBN010040R1018 5/358 DRASL09-81S 1SBK104335R8100 8/2 BEA460H/T4 1SFN085907R1000 5/352 CA5-11/11M 1SBN010040R1118 5/358 DRASL09-83S 1SBK104335R8300 8/2 BEA7/132 1SBN080906R1002 3/39 CA5-13M 1SBN010040R1113 5/358 DRASL12-81S 1SBK114335R8100 8/2 BEA7/325 1SBN080906R1001 3/39 CA5-22E 1SBN010040R1022 5/358 DRASL12-83S 1SBK114335R8300 8/2 BEA750/T5 1SFN086106R1001 5/352 CA5-22M 1SBN010040R1122 5/358 DRASL16-81S 1SBK124335R8100 8/2 BEA750/T6 1SFN086106R1000 5/352 CA5-31E 1SBN010040R1031 5/358 DRASL16-83S 1SBK124335R8300 8/2 BEA750D/T5 1SFN086106R1003 5/352 CA5-31M 1SBN010040R1131 5/358 DX495 1SAM401912R1001 2/35 BEA750D/T6 1SFN086106R1002 5/352 CA5-40E 1SBN010040R1040 5/358 E1250DU-1250 1SFA739001R1000 7/48 BED460 1SFN085703R1000 5/351 CA6-11E GJL1201317R0002 3/39 E140DU-140 1SAX321001R1101 7/28 BED580 1SFN085903R1000 5/351 CA6-11E-F GJL1201318R0002 3/39 E16DU-0.32 1SAX111001R1101 7/28 BED750 1SFN086103R1000 5/351 CA6-11E-P GJL1201319R0002 3/39 E16DU-1.0 1SAX111001R1102 7/28 BEF460/OESA400 1SFN085708R1000 5/352 CA6-11K GJL1201317R0001 3/40 E16DU-18.9 1SAX111001R1105 7/28 BEF750/OESA800 1SFN086108R1000 5/352 CA6-11K-F GJL1201318R0001 3/40 E16DU-2.7 1SAX111001R1103 7/28 BEM460-30 1SFN085701R1000 5/350 CA6-11K-P GJL1201319R0001 3/40 E16DU-6.3 1SAX111001R1104 7/28 BEM750-30 1SFN086101R1000 5/350 CA6-11M GJL1201317R0003 3/39 E45DU-30 1SAX211001R1101 7/28 BEP140-30 1SFN084214R1000 5/350 CA6-11M-F GJL1201318R0003 3/39 E45DU-45 1SAX211001R1102 7/28 BEP140-40 1SFN084214R2000 5/350 CA6-11M-P GJL1201319R0003 3/39 E80DU-80 1SAX311001R1101 7/28 BEP205-30 1SFN084814R1000 5/350 CA6-11N GJL1201317R0004 3/39 EF146-150 1SAX351001R1101 7/37 BEP205-40 1SFN084814R2000 5/350 CA6-11N-F GJL1201318R0004 3/39 EF19-0.32 1SAX121001R1101 7/33 BEP370-30 1SFN085414R1000 5/350 CA6-11N-P GJL1201319R0004 3/39 EF19-1.0 1SAX121001R1102 7/33 BEP370-40 1SFN085414R2000 5/350 CAF6-02E GJL1201330R0010 3/39 EF19-18.9 1SAX121001R1105 7/33 BER140-4 1SFN084211R1000 5/350 CAF6-02K GJL1201330R0009 3/40 EF19-2.7 1SAX121001R1103 7/33 BER16-4 1SBN081311R1000 5/87 CAF6-02M GJL1201330R0011 3/39 EF19-6.3 1SAX121001R1104 7/33 BER16C-3 1SBN081012R1000 4/37 CAF6-02N GJL1201330R0012 3/39 EF205-210 1SAX531001R1101 7/41 BER205-4 1SFN084811R1000 5/350 CAF6-11E GJL1201330R0002 3/39 EF370-380 1SAX611001R1101 7/41 BER370-4 1SFN085411R1000 5/350 CAF6-11K GJL1201330R0001 3/40 EF45-30 1SAX221001R1101 7/33 BER38-4 1SBN082311R1000 5/87 CAF6-11M GJL1201330R0003 3/39 EF45-45 1SAX221001R1102 7/33 BER65-4 1SBN083411R1000 5/87 CAF6-11N GJL1201330R0004 3/39 EF460-500 1SAX721001R1101 7/45 BER96-4 1SBN083911R1000 5/87 CAF6-20E GJL1201330R0006 3/39 EF65-56 1SAX331001R1102 7/37 BES460 1SFN085704R1000 5/350 CAF6-20K GJL1201330R0005 3/40 EF65-70 1SAX331001R1101 7/37 BES750 1SFN086104R1000 5/350 CAF6-20M GJL1201330R0007 3/39 EF750-800 1SAX821001R1101 7/45 BEY140-4 1SFN084413R1000 5/351 CAF6-20N GJL1201330R0008 3/39 EF96-100 1SAX341001R1101 7/37 BEY16-4 1SBN081313R2000 5/87 CAL18-11 1SFN010720R1011 5/103 FR16AS-12VARS 1SBN101035R1000 8/2 BEY16C-3 1SBN081018R2000 4/37 CAL18-11B 1SFN010720R3311 5/103 FS116 1SAM201909R1001 2/20 BEY190-4 1SFN084813R1000 5/351 CAL19-11 1SFN010820R1011 5/93 GA75-10-00 1SBL411025R8000 5/242 1SBL411025R8100 5/242 BEY205-4 1SFN085213R1000 5/351 CAL19-11B 1SFN010820R3311 5/93 1SBL411025R8300 5/242 BEY265-4 1SFN085413R1000 5/351 CAL4-11 1SBN010120R1011 5/322 1SBL411025R8400 5/242 BEY370-4 1SFN085813R1000 5/351 CAL4-11S 1SBN010130R1011 6/51 1SBL411025R8500 5/242 BEY38-4 1SBN082713R2000 5/87 CAL4-11-T 1SBN010120T1011 5/322 1SBL411025R8600 5/242 BEY65-4 1SBN083413R2000 5/87 CAL5-11 1SBN010020R1011 5/358 1SBL411025R8800 5/242 BEY96-4 1SBN083913R2000 5/87 CAT4-11E 1SBN010151R1011 5/87 GA75-10-11 1SBL411025R8011 5/242 BP16 1SBN111403R1000 5/371 CAT4-11ES 1SBN010153R1011 6/51 1SBL411025R8111 5/242 BP38-4 1SBN112303T1000 5/345 CAT4-11M 1SBN010151R1111 5/87 1SBL411025R8311 5/242 BP65-4 1SBN113403T1000 5/345 CAT4-11MS 1SBN010153R1111 6/51 1SBL411025R8411 5/242 BP96-4 1SBN113903T1000 5/345 CAT4-11U 1SBN010151R1311 5/87 1SBL411025R8511 5/242 BS1-3 1SAM201908R1001 2/20 CAT4-11US 1SBN010153R1311 6/51 1SBL411025R8611 5/242 BS4-3 1SAM401911R1008 2/35 CB5-01 1SBN010013R1001 5/340 1SBL411025R8811 5/242 BSM6-30 GJL1201908R0001 3/39 CB5-10 1SBN010013R1010 5/340 GAE75-10-00 1SBL419025R8000 5/243 BX4 1SBN110108T1000 5/307 CC4-01 1SBN010111R1001 5/322 1SBL419025R8100 5/243 BX4-CA 1SBN110109W1000 5/307 CC4-10 1SBN010111R1010 5/322 1SBL419025R8300 5/243 CA3-01 1SBN011010T1001 4/37 CC5-01 1SBN010011R1001 5/358 1SBL419025R8400 5/243 CA3-01S 1SBN011019T1001 6/9 CC5-10 1SBN010011R1010 5/358 1SBL419025R8600 5/243 CA3-10 1SBN011010T1010 4/37 CE5-01D0.1 1SBN010015R1001 5/360 1SBL419025R8700 5/243 CA3-10S 1SBN011019T1010 6/9 CE5-01D2 1SBN010017R1001 5/360 1SBL419025R8800 5/243 CA4-01 1SBN010110R1001 5/87 CE5-01W0.1 1SBN010016R1001 5/360 1SBL419025R8900 5/243 CA4-01S 1SBN010119R1001 6/51 CE5-01W2 1SBN010018R1001 5/360 GAE75-10-11 1SBL419025R8011 5/243 CA4-01S-T 1SBN010119T1001 6/51 CE5-10D0.1 1SBN010015R1010 5/360 1SBL419025R8111 5/243 CA4-01-T 1SBN010110T1001 5/87 CE5-10D2 1SBN010017R1010 5/360 1SBL419025R8311 5/243 CA4-04E 1SBN010140R1004 5/187 CE5-10W0.1 1SBN010016R1010 5/360 1SBL419025R8411 5/243 CA4-04M 1SBN010140R1104 5/322 CE5-10W2 1SBN010018R1010 5/360 1SBL419025R8611 5/243 CA4-04N 1SBN010140R1204 5/307 CEL18-01 1SFN010716R1001 5/247 1SBL419025R8711 5/243 CA4-10 1SBN010110R1010 5/87 CEL18-10 1SFN010716R1010 5/247 1SBL419025R8811 5/243 CA4-10S 1SBN010119R1010 6/51 CK1-02 1SAM301901R1003 2/15 1SBL419025R8911 5/243 CA4-10S-T 1SBN010119T1010 6/51 CK1-11 1SAM301901R1001 2/15 GAF1250-10-11 1SFL647025R6811 5/246 CA4-10-T 1SBN010110T1010 5/87 CK1-20 1SAM301901R1002 2/15 1SFL647025R6911 5/246 CA4-13M 1SBN010140R1113 5/322 DB140E 1SAX301110R1002 7/32 1SFL647025R7011 5/246 CA4-13N 1SBN010140R1213 5/307 DB16 1SAZ701901R0001 7/4 1SFL647025R7111 5/246 CA4-22E 1SBN010140R1022 5/87 DB16E 1SAX101110R0001 7/32 GAF1650-10-11 1SFL677025R7011 5/246 CA4-22ES 1SBN010145R1022 6/51 DB19EF 1SAX101910R1001 7/33 13/14 | ABB Index Type classification Type Order code Page Type Order code Page Type Order code Page KA495 1SAM501901R1001 2/35 GAF185-10-11 1SFL497025R6911 5/244 LT205-30L 1SFN124803R1000 5/93 KA495C 1SAM501902R1001 2/35 1SFL497025R7011 5/244 LT205-30Y 1SFN124804R1000 5/93 KC6-22Z-01 GJH1213001R0221 3/16 1SFL497025R7211 5/244 LT205-40C 1SFN124801R2000 5/191 KC6-22Z-03 GJH1213001R0223 3/16 GAF2050-10-11 1SFL707025R7011 5/246 LT205-40L 1SFN124803R2000 5/191 KC6-22Z-04 GJH1213001R0224 3/16 GAF300-10-11 1SFL557025R6911 5/244 LT370-30C 1SFN125401R1000 5/93 KC6-22Z-05 GJH1213001R0225 3/16 1SFL557025R7011 5/244 LT370-30D 1SFN125406R1000 5/93 KC6-22Z-07 GJH1213001R0227 3/16 1SFL557025R7211 5/244 LT370-30L 1SFN125403R1000 5/93 KC6-22Z-16 GJH1213001R1226 3/16 GAF460-10-11 1SFL597025R6811 5/245 LT370-30Y 1SFN125404R1000 5/93 KC6-22Z-F-01 GJH1213003R0221 3/37 1SFL597025R6911 5/245 LT370-40C 1SFN125401R2000 5/191 KC6-22Z-F-04 GJH1213003R0224 3/37 1SFL597025R7011 5/245 LT370-40L 1SFN125403R2000 5/191 KC6-22Z-F-05 GJH1213003R0225 3/37 1SFL597025R7111 5/245 LT460-AC 1SFN125701R1000 5/103 KC6-22Z-F-07 GJH1213003R0227 3/37 GAF750-10-11 1SFL637025R6811 5/245 LT460-AL 1SFN125703R1000 5/103 KC6-22Z-F-16 GJH1213003R1226 3/37 1SFL637025R6911 5/245 LT6-B GJL1201906R0001 3/39 KC6-22Z-P-01 GJH1213009R0221 3/26 1SFL637025R7011 5/245 LT750-AC 1SFN126101R1000 5/103 KC6-22Z-P-04 GJH1213009R0224 3/26 1SFL637025R7111 5/245 LT750-AL 1SFN126103R1000 5/103 KC6-22Z-P-05 GJH1213009R0225 3/26 HK1-02 1SAM201902R1003 2/15 LW110 1SFN074307R1000 5/378 KC6-22Z-P-07 GJH1213009R0227 3/26 HK1-11 1SAM201902R1001 2/15 LW1250 1SFN076407R1000 5/103 KC6-22Z-P-16 GJH1213009R1226 3/26 HK1-20 1SAM201902R1002 2/15 LW140 1SFN074207R1000 5/93 KC6-31Z-01 GJH1213001R0311 3/16 HK1-20L 1SAM201902R1004 2/15 LW205 1SFN074807R1000 5/93 KC6-31Z-03 GJH1213001R0313 3/16 HK4-11 1SAM401901R1001 2/32 LW205-40 1SFN074807R2000 5/191 KC6-31Z-04 GJH1213001R0314 3/16 HK4-W 1SAM401901R1002 2/32 LW370 1SFN075407R1000 5/93 KC6-31Z-05 GJH1213001R0315 3/16 HKF1-11 1SAM201901R1001 2/15 LW370-40 1SFN075407R2000 5/191 KC6-31Z-07 GJH1213001R0317 3/16 HKF1-20 1SAM201901R1002 2/15 LW460 1SFN075707R1000 5/103 KC6-31Z-1.4-81 GJH1213001R8311 3/17 HKS4-02 1SAM401902R1003 2/32 LW750 1SFN076107R1000 5/103 KC6-31Z-16 GJH1213001R1316 3/16 HKS4-11 1SAM401902R1001 2/32 LX140 1SFN074210R1000 5/93 KC6-31Z-2.4-51 GJH1213001R5311 3/17 HKS4-20 1SAM401902R1002 2/32 LX205 1SFN074810R1000 5/93 KC6-31Z-F-01 GJH1213003R0311 3/37 HTP500-BA4 1SNA235712R2400 4/82 LX370 1SFN075410R1000 5/93 KC6-31Z-F-04 GJH1213003R0314 3/37 IB132-G 1SAM201911R1010 2/22 LX460 1SFN075710R1000 5/103 KC6-31Z-F-05 GJH1213003R0315 3/37 IB132-Y 1SAM201911R1011 2/22 LX750 1SFN076110R1000 5/103 KC6-31Z-F-07 GJH1213003R0317 3/37 K6-22Z-01 GJH1211001R0221 3/15 LY140 1SFN074203R1000 5/349 KC6-31Z-F-1.4-81 GJH1213003R8311 3/38 K6-22Z-02 GJH1211001R0222 3/15 LY16-4 1SBN071303T1000 5/349 KC6-31Z-F-16 GJH1213003R1316 3/37 K6-22Z-03 GJH1211001R0223 3/15 LY185 1SFN074703R1000 5/349 KC6-31Z-F-51 GJH1213003R5311 3/38 K6-22Z-80 GJH1211001R8220 3/15 LY300 1SFN075103R1000 5/349 KC6-31Z-P-01 GJH1213009R0311 3/26 K6-22Z-84 GJH1211001R8224 3/15 LY38-4 1SBN072303T1000 5/349 KC6-31Z-P-04 GJH1213009R0314 3/26 K6-22Z-85 GJH1211001R8225 3/15 LY460 1SFN075703R1000 5/349 KC6-31Z-P-05 GJH1213009R0315 3/26 K6-22Z-F-01 GJH1211003R0221 3/36 LY750 1SFN076103R1000 5/349 KC6-31Z-P-1.4-81 GJH1213009R8311 3/28 K6-22Z-F-02 GJH1211003R0222 3/36 MO132-0.16 1SAM360000R1001 2/6 KC6-31Z-P-16 GJH1213009R1316 3/26 K6-22Z-F-03 GJH1211003R0223 3/36 MO132-0.25 1SAM360000R1002 2/6 KC6-31Z-P-2.4-51 GJH1213009R5311 3/28 K6-22Z-F-80 GJH1211003R8220 3/36 MO132-0.4 1SAM360000R1003 2/6 KC6-40E-01 GJH1213001R0401 3/16 K6-22Z-F-84 GJH1211003R8224 3/36 MO132-0.63 1SAM360000R1004 2/6 KC6-40E-03 GJH1213001R0403 3/16 K6-22Z-F-85 GJH1211003R8225 3/36 MO132-1.0 1SAM360000R1005 2/6 KC6-40E-04 GJH1213001R0404 3/16 K6-22Z-P-01 GJH1211009R0221 3/25 MO132-1.6 1SAM360000R1006 2/6 KC6-40E-05 GJH1213001R0405 3/16 K6-22Z-P-02 GJH1211009R0222 3/25 MO132-10 1SAM360000R1010 2/6 KC6-40E-07 GJH1213001R0407 3/16 K6-22Z-P-03 GJH1211009R0223 3/25 MO132-12 1SAM360000R1012 2/6 KC6-40E-1.4-81 GJH1213001R8401 3/17 K6-22Z-P-80 GJH1211009R8220 3/25 MO132-16 1SAM360000R1011 2/6 KC6-40E-16 GJH1213001R1406 3/16 K6-22Z-P-84 GJH1211009R8224 3/25 MO132-2.5 1SAM360000R1007 2/6 KC6-40E-2.4-51 GJH1213001R5401 3/17 K6-22Z-P-85 GJH1211009R8225 3/25 MO132-20 1SAM360000R1013 2/6 KC6-40E-F-01 GJH1213003R0401 3/37 K6-31Z-01 GJH1211001R0311 3/15 MO132-25 1SAM360000R1014 2/6 KC6-40E-F-04 GJH1213003R0404 3/37 K6-31Z-02 GJH1211001R0312 3/15 MO132-32 1SAM360000R1015 2/6 KC6-40E-F-05 GJH1213003R0405 3/37 K6-31Z-03 GJH1211001R0313 3/15 MO132-4.0 1SAM360000R1008 2/6 KC6-40E-F-1.4-81 GJH1213003R8401 3/38 K6-31Z-80 GJH1211001R8310 3/15 MO132-6.3 1SAM360000R1009 2/6 KC6-40E-F-16 GJH1213003R1406 3/37 K6-31Z-84 GJH1211001R8314 3/15 MO450-40 1SAM460000R1005 2/27 KC6-40E-F-51 GJH1213003R5401 3/38 K6-31Z-85 GJH1211001R8315 3/15 MO450-45 1SAM460000R1006 2/27 KC6-40E-P-01 GJH1213009R0401 3/26 K6-31Z-F-01 GJH1211003R0311 3/36 MO450-50 1SAM460000R1007 2/27 KC6-40E-P-04 GJH1213009R0404 3/26 K6-31Z-F-02 GJH1211003R0312 3/36 MO495-100 1SAM560000R1010 2/27 KC6-40E-P-05 GJH1213009R0405 3/26 K6-31Z-F-03 GJH1211003R0313 3/36 MO495-63 1SAM560000R1007 2/27 KC6-40E-P-07 GJH1213009R0407 3/26 K6-31Z-F-80 GJH1211003R8310 3/36 MO495-75 1SAM560000R1008 2/27 KC6-40E-P-1.4-81 GJH1213009R8401 3/28 K6-31Z-F-84 GJH1211003R8314 3/36 MO495-90 1SAM560000R1009 2/27 KC6-40E-P-16 GJH1213009R1406 3/26 K6-31Z-F-85 GJH1211003R8315 3/36 MO496-100 1SAM590000R1010 2/27 KC6-40E-P-2.4-51 GJH1213009R5401 3/28 K6-31Z-P-01 GJH1211009R0311 3/25 MO496-32 1SAM590000R1004 2/27 KPR-101L 1SFA616162R1014 7/4 K6-31Z-P-02 GJH1211009R0312 3/25 MO496-40 1SAM590000R1005 2/27 LB6 GJL1201902R0001 3/39 K6-31Z-P-03 GJH1211009R0313 3/25 MO496-50 1SAM590000R1006 2/27 LB6-CA GJL1201903R0001 3/39 K6-31Z-P-80 GJH1211009R8310 3/25 MO496-63 1SAM590000R1007 2/27 LD146-30 1SFN074208R1000 5/348 K6-31Z-P-84 GJH1211009R8314 3/25 MO496-75 1SAM590000R1008 2/27 LD146-40 1SFN074208R2000 5/348 K6-31Z-P-85 GJH1211009R8315 3/25 MO496-90 1SAM590000R1009 2/27 LD38-4 1SBN072308R1000 5/346 K6-40E-01 GJH1211001R0401 3/15 MS116-0.16 1SAM250000R1001 2/4 LD75 1SBN073508R1000 5/378 K6-40E-02 GJH1211001R0402 3/15 MS116-0.16-HKF1-11 1SAM250005R1001 2/4 LDC4 1SBN070156T1000 5/307 K6-40E-03 GJH1211001R0403 3/15 MS116-0.25 1SAM250000R1002 2/4 LDC4S 1SBN070157T1000 6/51 K6-40E-80 GJH1211001R8400 3/15 MS116-0.25-HKF1-11 1SAM250005R1002 2/4 LF16-4 1SBN071305R1000 5/349 K6-40E-84 GJH1211001R8404 3/15 MS116-0.4 1SAM250000R1003 2/4 LF38-4 1SBN072305R1000 5/349 K6-40E-85 GJH1211001R8405 3/15 MS116-0.4-HKF1-11 1SAM250005R1003 2/4 LG16-4 1SBN071306R1000 5/349 K6-40E-F-01 GJH1211003R0401 3/36 MS116-0.63 1SAM250000R1004 2/4 LH38-4 1SBN072304R1000 5/349 K6-40E-F-02 GJH1211003R0402 3/36 MS116-0.63-HKF1-11 1SAM250005R1004 2/4 LK75-F 1SBN073552R1002 5/379 K6-40E-F-03 GJH1211003R0403 3/36 MS116-1.0 1SAM250000R1005 2/4 LK75-L 1SBN073552R1003 5/379 K6-40E-F-80 GJH1211003R8400 3/36 MS116-1.0-HKF1-11 1SAM250005R1005 2/4 LL146-30 1SFN074211R1000 5/348 K6-40E-F-84 GJH1211003R8404 3/36 MS116-1.6 1SAM250000R1006 2/4 LL146-40 1SFN074211R2000 5/348 K6-40E-F-85 GJH1211003R8405 3/36 MS116-1.6-HKF1-11 1SAM250005R1006 2/4 LL205-40 1SFN074811R2000 5/348 K6-40E-P-01 GJH1211009R0401 3/25 MS116-10 1SAM250000R1010 2/4 LL370-40 1SFN075411R2000 5/348 K6-40E-P-02 GJH1211009R0402 3/25 MS116-10.0-HKF1-11 1SAM250005R1010 2/4 LP1250 1SFN076412R1000 5/247 K6-40E-P-03 GJH1211009R0403 3/25 MS116-12 1SAM250000R1012 2/4 LP185 1SFN074712R1000 5/247 K6-40E-P-80 GJH1211009R8400 3/25 MS116-12.0-HKF1-11 1SAM250005R1012 2/4 LP2050 1SFN076512R1000 5/247 K6-40E-P-84 GJH1211009R8404 3/25 MS116-16 1SAM250000R1011 2/4 LP300 1SFN075112R1000 5/247 K6-40E-P-85 GJH1211009R8405 3/25 MS116-16.0-HKF1-11 1SAM250005R1011 2/4 LP460 1SFN075712R1000 5/247 K6S-22Z-1.7-71 GJH1213001R7221 3/17 MS116-2.5 1SAM250000R1007 2/4 LP6 GJL1201907R0001 3/39 K6S-22Z-2.8-72 GJH1213001R7222 3/17 MS116-2.5-HKF1-11 1SAM250005R1007 2/4 LP750 1SFN076112R1000 5/247 K6S-31Z-1.7-71 GJH1213001R7311 3/17 MS116-20 1SAM250000R1013 2/4 LT140-30L 1SFN124203R1000 5/93 K6S-31Z-2.8-72 GJH1213001R7312 3/17 MS116-20-HKF1-11 1SAM250005R1013 2/4 LT140-40L 1SFN124203R2000 5/191 K6S-40E-1.7-71 GJH1213001R7401 3/17 MS116-25 1SAM250000R1014 2/4 LT200/A 1SAZ401901R1001 7/24 K6S-40E-2.8-72 GJH1213001R7402 3/17 MS116-25-HKF1-11 1SAM250005R1014 2/4 LT205-30C 1SFN124801R1000 5/93 KA450 1SAM401908R1001 2/35 MS116-32 1SAM250000R1015 2/4 Index 13 ABB | 13/15 Index Type classification Type Page Type Order code Page Type Order code Page Index 13 Order code MS116-32-HKF1-11 1SAM250005R1015 2/4 NF33/11-41 1SBH137001R4139 5/308 NFZ51/11-21 1SBH136001R2159 5/309 MS116-4.0 1SAM250000R1008 2/4 NF40E-12 1SBH137001R1240 5/304 NFZ51/11-22 1SBH136001R2259 5/309 MS116-4.0-HKF1-11 1SAM250005R1008 2/4 NF40E-13 1SBH137001R1340 5/304 NFZ51/11-23 1SBH136001R2359 5/309 MS116-6.3 1SAM250000R1009 2/4 NF40E-14 1SBH137001R1440 5/304 NFZ53E-20 1SBH136001R2053 5/309 MS116-6.3-HKF1-11 1SAM250005R1009 2/4 NF40E-41 1SBH137001R4140 5/304 NFZ53E-21 1SBH136001R2153 5/309 MS132-0.16 1SAM350000R1001 2/5 NF40ES-12 1SBH137004R1240 6/68 NFZ53E-22 1SBH136001R2253 5/309 MS132-0.16-HKF1-11 1SAM350005R1001 2/5 NF40ES-13 1SBH137004R1340 6/68 NFZ53E-23 1SBH136001R2353 5/309 MS132-0.16T 1SAM340000R1001 2/7 NF40ES-14 1SBH137004R1440 6/68 NFZ53ES-20 1SBH136004R2053 6/71 MS132-0.25 1SAM350000R1002 2/5 NF40ES-41 1SBH137004R4140 6/68 NFZ53ES-21 1SBH136004R2153 6/71 MS132-0.25-HKF1-11 1SAM350005R1002 2/5 NF44E-12 1SBH137001R1244 5/308 NFZ53ES-22 1SBH136004R2253 6/71 MS132-0.25T 1SAM340000R1002 2/7 NF44E-13 1SBH137001R1344 5/308 NFZ53ES-23 1SBH136004R2353 6/71 MS132-0.4 1SAM350000R1003 2/5 NF44E-14 1SBH137001R1444 5/308 NFZ62E-20 1SBH136001R2062 5/309 MS132-0.4-HKF1-11 1SAM350005R1003 2/5 NF44E-41 1SBH137001R4144 5/308 NFZ62E-21 1SBH136001R2162 5/309 MS132-0.4T 1SAM340000R1003 2/7 NF44ES-12 1SBH137004R1244 6/70 NFZ62E-22 1SBH136001R2262 5/309 MS132-0.63 1SAM350000R1004 2/5 NF44ES-13 1SBH137004R1344 6/70 NFZ62E-23 1SBH136001R2362 5/309 MS132-0.63-HKF1-11 1SAM350005R1004 2/5 NF44ES-14 1SBH137004R1444 6/70 NFZ62ES-20 1SBH136004R2062 6/71 MS132-0.63T 1SAM340000R1004 2/7 NF44ES-41 1SBH137004R4144 6/70 NFZ62ES-21 1SBH136004R2162 6/71 MS132-1.0 1SAM350000R1005 2/5 NF51/11-12 1SBH137001R1259 5/308 NFZ62ES-22 1SBH136004R2262 6/71 MS132-1.0-HKF1-11 1SAM350005R1005 2/5 NF51/11-13 1SBH137001R1359 5/308 NFZ62ES-23 1SBH136004R2362 6/71 MS132-1.0T 1SAM340000R1005 2/7 NF51/11-14 1SBH137001R1459 5/308 NFZ71E-20 1SBH136001R2071 5/309 MS132-1.6 1SAM350000R1006 2/5 NF51/11-41 1SBH137001R4159 5/308 NFZ71E-21 1SBH136001R2171 5/309 MS132-1.6-HKF1-11 1SAM350005R1006 2/5 NF53E-12 1SBH137001R1253 5/308 NFZ71E-22 1SBH136001R2271 5/309 MS132-1.6T 1SAM340000R1006 2/7 NF53E-13 1SBH137001R1353 5/308 NFZ71E-23 1SBH136001R2371 5/309 MS132-10 1SAM350000R1010 2/5 NF53E-14 1SBH137001R1453 5/308 NFZ71ES-20 1SBH136004R2071 6/71 MS132-10.0-HKF1-11 1SAM350005R1010 2/5 NF53E-41 1SBH137001R4153 5/308 NFZ71ES-21 1SBH136004R2171 6/71 MS132-10T 1SAM340000R1010 2/7 NF53ES-12 1SBH137004R1253 6/70 NFZ71ES-22 1SBH136004R2271 6/71 MS132-12 1SAM350000R1012 2/5 NF53ES-13 1SBH137004R1353 6/70 NFZ71ES-23 1SBH136004R2371 6/71 MS132-12.0-HKF1-11 1SAM350005R1012 2/5 NF53ES-14 1SBH137004R1453 6/70 NFZ80E-20 1SBH136001R2080 5/309 MS132-12T 1SAM340000R1012 2/7 NF53ES-41 1SBH137004R4153 6/70 NFZ80E-21 1SBH136001R2180 5/309 MS132-16 1SAM350000R1011 2/5 NF62E-12 1SBH137001R1262 5/308 NFZ80E-22 1SBH136001R2280 5/309 MS132-16.0-HKF1-11 1SAM350005R1011 2/5 NF62E-13 1SBH137001R1362 5/308 NFZ80E-23 1SBH136001R2380 5/309 MS132-16T 1SAM340000R1011 2/7 NF62E-14 1SBH137001R1462 5/308 NFZ80ES-20 1SBH136004R2080 6/71 MS132-2.5 1SAM350000R1007 2/5 NF62E-41 1SBH137001R4162 5/308 NFZ80ES-21 1SBH136004R2180 6/71 MS132-2.5-HKF1-11 1SAM350005R1007 2/5 NF62ES-12 1SBH137004R1262 6/70 NFZ80ES-22 1SBH136004R2280 6/71 MS132-2.5T 1SAM340000R1007 2/7 NF62ES-13 1SBH137004R1362 6/70 NFZ80ES-23 1SBH136004R2380 6/71 MS132-20 1SAM350000R1013 2/5 NF62ES-14 1SBH137004R1462 6/70 NS22E-16 1SBH101001R1622 4/62 MS132-20-HKF1-11 1SAM350005R1013 2/5 NF62ES-41 1SBH137004R4162 6/70 NS22E-20 1SBH101001R2022 4/62 MS132-20T 1SAM340000R1013 2/7 NF71E-12 1SBH137001R1271 5/308 NS22E-26 1SBH101001R2622 4/62 MS132-25 1SAM350000R1014 2/5 NF71E-13 1SBH137001R1371 5/308 NS22E-28 1SBH101001R2822 4/62 MS132-25-HKF1-11 1SAM350005R1014 2/5 NF71E-14 1SBH137001R1471 5/308 NS22ES-16 1SBH101004R1622 6/22 MS132-25T 1SAM340000R1014 2/7 NF71E-41 1SBH137001R4171 5/308 NS22ES-20 1SBH101004R2022 6/22 MS132-32 1SAM350000R1015 2/5 NF71ES-12 1SBH137004R1271 6/70 NS22ES-26 1SBH101004R2622 6/22 MS132-32-HKF1-11 1SAM350005R1015 2/5 NF71ES-13 1SBH137004R1371 6/70 NS22ES-28 1SBH101004R2822 6/22 MS132-4.0 1SAM350000R1008 2/5 NF71ES-14 1SBH137004R1471 6/70 NS31E-16 1SBH101001R1631 4/62 MS132-4.0-HKF1-11 1SAM350005R1008 2/5 NF71ES-41 1SBH137004R4171 6/70 NS31E-20 1SBH101001R2031 4/62 MS132-4.0T 1SAM340000R1008 2/7 NF80E-12 1SBH137001R1280 5/308 NS31E-26 1SBH101001R2631 4/62 MS132-6.3 1SAM350000R1009 2/5 NF80E-13 1SBH137001R1380 5/308 NS31E-28 1SBH101001R2831 4/62 MS132-6.3-HKF1-11 1SAM350005R1009 2/5 NF80E-14 1SBH137001R1480 5/308 NS31ES-16 1SBH101004R1631 6/22 MS132-6.3T 1SAM340000R1009 2/7 NF80E-41 1SBH137001R4180 5/308 NS31ES-20 1SBH101004R2031 6/22 MS450-40 1SAM450000R1005 2/23 NF80ES-12 1SBH137004R1280 6/70 NS31ES-26 1SBH101004R2631 6/22 MS450-45 1SAM450000R1006 2/23 NF80ES-13 1SBH137004R1380 6/70 NS31ES-28 1SBH101004R2831 6/22 MS450-50 1SAM450000R1007 2/23 NF80ES-14 1SBH137004R1480 6/70 NS40E-16 1SBH101001R1640 4/62 MS495-100 1SAM550000R1010 2/23 NF80ES-41 1SBH137004R4180 6/70 NS40E-20 1SBH101001R2040 4/62 MS495-63 1SAM550000R1007 2/23 NFZ22E-20 1SBH136001R2022 5/305 NS40E-26 1SBH101001R2640 4/62 MS495-75 1SAM550000R1008 2/23 NFZ22E-21 1SBH136001R2122 5/305 NS40E-28 1SBH101001R2840 4/62 MS495-90 1SAM550000R1009 2/23 NFZ22E-22 1SBH136001R2222 5/305 NS40ES-16 1SBH101004R1640 6/22 MS497-100 1SAM580000R1010 2/23 NFZ22E-23 1SBH136001R2322 5/305 NS40ES-20 1SBH101004R2040 6/22 MS497-32 1SAM580000R1004 2/23 NFZ22ES-20 1SBH136004R2022 6/69 NS40ES-26 1SBH101004R2640 6/22 MS497-40 1SAM580000R1005 2/23 NFZ22ES-21 1SBH136004R2122 6/69 NS40ES-28 1SBH101004R2840 6/22 MS497-50 1SAM580000R1006 2/23 NFZ22ES-22 1SBH136004R2222 6/69 NS44E-16 1SBH101001R1644 4/62 MS497-63 1SAM580000R1007 2/23 NFZ22ES-23 1SBH136004R2322 6/69 NS44E-20 1SBH101001R2044 4/62 MS497-75 1SAM580000R1008 2/23 NFZ31E-20 1SBH136001R2031 5/305 NS44E-26 1SBH101001R2644 4/62 MS497-90 1SAM580000R1009 2/23 NFZ31E-21 1SBH136001R2131 5/305 NS44E-28 1SBH101001R2844 4/62 MSAH1 1SAM201909R1021 2/38 NFZ31E-22 1SBH136001R2231 5/305 NS44ES-16 1SBH101004R1644 6/22 MSH-AR 1SAM201920R1000 2/38 NFZ31E-23 1SBH136001R2331 5/305 NS44ES-20 1SBH101004R2044 6/22 MSHD-LB 1SAM201920R1001 2/38 NFZ31ES-20 1SBH136004R2031 6/69 NS44ES-26 1SBH101004R2644 6/22 MSHD-LTB 1SAM201920R1011 2/38 NFZ31ES-21 1SBH136004R2131 6/69 NS44ES-28 1SBH101004R2844 6/22 MSHD-LTY 1SAM201920R1012 2/38 NFZ31ES-22 1SBH136004R2231 6/69 NS53E-16 1SBH101001R1653 4/62 MSHD-LY 1SAM201920R1002 2/38 NFZ31ES-23 1SBH136004R2331 6/69 NS53E-20 1SBH101001R2053 4/62 MSMN 1SAM101923R0002 2/38 NFZ33/11-20 1SBH136001R2039 5/309 NS53E-26 1SBH101001R2653 4/62 MSMNO 1SAM101923R0012 2/38 NFZ33/11-21 1SBH136001R2139 5/309 NS53E-28 1SBH101001R2853 4/62 NF22E-12 1SBH137001R1222 5/304 NFZ33/11-22 1SBH136001R2239 5/309 NS53ES-16 1SBH101004R1653 6/22 NF22E-13 1SBH137001R1322 5/304 NFZ33/11-23 1SBH136001R2339 5/309 NS53ES-20 1SBH101004R2053 6/22 NF22E-14 1SBH137001R1422 5/304 NFZ40E-20 1SBH136001R2040 5/305 NS53ES-26 1SBH101004R2653 6/22 NF22E-41 1SBH137001R4122 5/304 NFZ40E-21 1SBH136001R2140 5/305 NS53ES-28 1SBH101004R2853 6/22 NF22ES-12 1SBH137004R1222 6/68 NFZ40E-22 1SBH136001R2240 5/305 NS62E-16 1SBH101001R1662 4/62 NF22ES-13 1SBH137004R1322 6/68 NFZ40E-23 1SBH136001R2340 5/305 NS62E-20 1SBH101001R2062 4/62 NF22ES-14 1SBH137004R1422 6/68 NFZ40ES-20 1SBH136004R2040 6/69 NS62E-26 1SBH101001R2662 4/62 NF22ES-41 1SBH137004R4122 6/68 NFZ40ES-21 1SBH136004R2140 6/69 NS62E-28 1SBH101001R2862 4/62 NF31E-12 1SBH137001R1231 5/304 NFZ40ES-22 1SBH136004R2240 6/69 NS62ES-16 1SBH101004R1662 6/22 NF31E-13 1SBH137001R1331 5/304 NFZ40ES-23 1SBH136004R2340 6/69 NS62ES-20 1SBH101004R2062 6/22 NF31E-14 1SBH137001R1431 5/304 NFZ44E-20 1SBH136001R2044 5/309 NS62ES-26 1SBH101004R2662 6/22 NF31E-41 1SBH137001R4131 5/304 NFZ44E-21 1SBH136001R2144 5/309 NS62ES-28 1SBH101004R2862 6/22 NF31ES-12 1SBH137004R1231 6/68 NFZ44E-22 1SBH136001R2244 5/309 NS71E-16 1SBH101001R1671 4/62 NF31ES-13 1SBH137004R1331 6/68 NFZ44E-23 1SBH136001R2344 5/309 NS71E-20 1SBH101001R2071 4/62 NF31ES-14 1SBH137004R1431 6/68 NFZ44ES-20 1SBH136004R2044 6/71 NS71E-26 1SBH101001R2671 4/62 NF31ES-41 1SBH137004R4131 6/68 NFZ44ES-21 1SBH136004R2144 6/71 NS71E-28 1SBH101001R2871 4/62 NF33/11-12 1SBH137001R1239 5/308 NFZ44ES-22 1SBH136004R2244 6/71 NS71ES-16 1SBH101004R1671 6/22 NF33/11-13 1SBH137001R1339 5/308 NFZ44ES-23 1SBH136004R2344 6/71 NS71ES-20 1SBH101004R2071 6/22 NF33/11-14 1SBH137001R1439 5/308 NFZ51/11-20 1SBH136001R2059 5/309 NS71ES-26 1SBH101004R2671 6/22 13/16 | ABB Index Type classification Type Order code Page Type Order code Page Type Order code Page PR400-2 1SFN095700R1002 5/354 NS71ES-28 1SBH101004R2871 6/22 T16-1.3 1SAZ711201R1025 7/4 PR460-1 1SFN095700R1000 5/354 NS80E-16 1SBH101001R1680 4/62 T16-1.7 1SAZ711201R1028 7/4 PR460-2 1SFN095700R1001 5/354 NS80E-20 1SBH101001R2080 4/62 T16-10 1SAZ711201R1043 7/4 PR580-2 1SFN096100R1002 5/354 NS80E-26 1SBH101001R2680 4/62 T16-13 1SAZ711201R1045 7/4 PR750-1 1SFN096100R1000 5/354 NS80E-28 1SBH101001R2880 4/62 T16-16 1SAZ711201R1047 7/4 PR750-2 1SFN096100R1001 5/354 NS80ES-16 1SBH101004R1680 6/22 T16-2.3 1SAZ711201R1031 7/4 PS1-2-0-65 1SAM201906R1102 2/20 NS80ES-20 1SBH101004R2080 6/22 T16-3.1 1SAZ711201R1033 7/4 PS1-2-1-65 1SAM201906R1112 2/20 NS80ES-26 1SBH101004R2680 6/22 T16-4.2 1SAZ711201R1035 7/4 PS1-2-2-65 1SAM201906R1122 2/20 NS80ES-28 1SBH101004R2880 6/22 T16-5.7 1SAZ711201R1038 7/4 PS1-3-0-100 1SAM201916R1103 2/20 NSL22E-81 1SBH103001R8122 4/63 T16-7.6 1SAZ711201R1040 7/4 PS1-3-0-65 1SAM201906R1103 2/20 NSL22E-83 1SBH103001R8322 4/63 TA200DU-110 1SAZ421201R1002 7/24 PS1-3-1-100 1SAM201916R1113 2/20 NSL22E-86 1SBH103001R8622 4/63 TA200DU-135 1SAZ421201R1003 7/24 PS1-3-1-65 1SAM201906R1113 2/20 NSL22E-88 1SBH103001R8822 4/63 TA200DU-150 1SAZ421201R1004 7/24 PS1-3-2-100 1SAM201916R1123 2/20 NSL22ES-81 1SBH103004R8122 6/23 TA200DU-175 1SAZ421201R1005 7/24 PS1-3-2-65 1SAM201906R1123 2/20 NSL22ES-83 1SBH103004R8322 6/23 TA200DU-200 1SAZ421201R1006 7/24 PS1-4-0-100 1SAM201916R1104 2/20 NSL22ES-86 1SBH103004R8622 6/23 TA200DU-90 1SAZ421201R1001 7/24 PS1-4-0-65 1SAM201906R1104 2/20 NSL22ES-88 1SBH103004R8822 6/23 TB450 1SAM401910R1001 2/35 PS1-4-1-100 1SAM201916R1114 2/20 NSL31E-81 1SBH103001R8131 4/63 TBC7-22-00-55 GJL1313561R5005 3/14 PS1-4-1-65 1SAM201906R1114 2/20 NSL31E-83 1SBH103001R8331 4/63 TBC7-22-00-62 GJL1313561R6002 3/14 PS1-4-2-65 1SAM201906R1124 2/20 NSL31E-86 1SBH103001R8631 4/63 TBC7-22-00-68 GJL1313561R6008 3/14 PS1-5-0-100 1SAM201916R1105 2/20 NSL31E-88 1SBH103001R8831 4/63 TBC7-30-01-51 GJL1313061R5011 3/11 PS1-5-0-65 1SAM201906R1105 2/20 NSL31ES-81 1SBH103004R8131 6/23 TBC7-30-01-55 GJL1313061R5015 3/11 PS1-5-1-100 1SAM201916R1115 2/20 NSL31ES-83 1SBH103004R8331 6/23 TBC7-30-01-62 GJL1313061R6012 3/11 PS1-5-1-65 1SAM201906R1115 2/20 NSL31ES-86 1SBH103004R8631 6/23 TBC7-30-01-68 GJL1313061R6018 3/11 PS1-5-2-65 1SAM201906R1125 2/20 NSL31ES-88 1SBH103004R8831 6/23 TBC7-30-10-51 GJL1313061R5101 3/11 PS4-2-0 1SAM401911R1001 2/35 NSL40E-81 1SBH103001R8140 4/63 TBC7-30-10-55 GJL1313061R5105 3/11 PS4-2-2 1SAM401911R1004 2/35 NSL40E-83 1SBH103001R8340 4/63 TBC7-30-10-62 GJL1313061R6102 3/11 PS4-3-0 1SAM401911R1002 2/35 NSL40E-86 1SBH103001R8640 4/63 TBC7-30-10-68 GJL1313061R6108 3/11 PS4-3-2 1SAM401911R1005 2/35 NSL40E-88 1SBH103001R8840 4/63 TBC7-31-00-55 GJL1313461R5005 3/14 PS4-4-0 1SAM401911R1003 2/35 NSL40ES-81 1SBH103004R8140 6/23 TBC7-31-00-62 GJL1313461R6002 3/14 PS4-4-2 1SAM401911R1006 2/35 NSL40ES-83 1SBH103004R8340 6/23 TBC7-31-00-68 GJL1313461R6008 3/14 RA5-1 1SBN060300R1000 5/374 NSL40ES-86 1SBH103004R8640 6/23 TEF3-OFF 1SBN021014R1000 4/37 1SBN060300T1000 5/374 NSL40ES-88 1SBH103004R8840 6/23 TEF3-ON 1SBN021012R1000 4/37 RC5-1/133 1SBN050100R1001 4/37 NSL44E-81 1SBH103001R8144 4/63 TEF4-OFF 1SBN020114R1000 5/87 RC5-1/250 1SBN050100R1002 4/37 NSL44E-83 1SBH103001R8344 4/63 TEF4-ON 1SBN020112R1000 5/87 RC5-1/440 1SBN050100R1003 4/37 NSL44E-86 1SBH103001R8644 4/63 TEF4S-OFF 1SBN020115R1000 6/51 RC5-1/50 1SBN050100R1000 4/37 NSL44E-88 1SBH103001R8844 4/63 TEF4S-ON 1SBN020113R1000 6/51 RC5-2/133 1SBN050200R1001 5/372 NSL44ES-81 1SBH103004R8144 6/23 TEF5-OFF 1SBN020314R1000 5/365 RC5-2/250 1SBN050200R1002 5/372 NSL44ES-83 1SBH103004R8344 6/23 TEF5-ON 1SBN020312R1000 5/365 RC5-2/440 1SBN050200R1003 5/372 NSL44ES-86 1SBH103004R8644 6/23 TF140DU-110 1SAZ431201R1002 7/20 RC5-2/50 1SBN050200R1000 5/372 NSL44ES-88 1SBH103004R8844 6/23 TF140DU-135 1SAZ431201R1003 7/20 RT5/150 1SBN050020R1003 4/37 NSL53E-81 1SBH103001R8153 4/63 TF140DU-142 1SAZ431201R1004 7/20 RT5/264 1SBN050020R1004 4/37 NSL53E-83 1SBH103001R8353 4/63 TF140DU-90 1SAZ431201R1001 7/20 RT5/32 1SBN050020R1000 4/37 NSL53E-86 1SBH103001R8653 4/63 TF42-0.13 1SAZ721201R1005 7/8 RT5/65 1SBN050020R1001 4/37 NSL53E-88 1SBH103001R8853 4/63 TF42-0.17 1SAZ721201R1008 7/8 RT5/90 1SBN050020R1002 4/37 NSL53ES-81 1SBH103004R8153 6/23 TF42-0.23 1SAZ721201R1009 7/8 RV5/133 1SBN050010R1001 4/37 NSL53ES-83 1SBH103004R8353 6/23 TF42-0.31 1SAZ721201R1013 7/8 RV5/250 1SBN050010R1002 4/37 NSL53ES-86 1SBH103004R8653 6/23 TF42-0.41 1SAZ721201R1014 7/8 RV5/440 1SBN050010R1003 4/37 NSL53ES-88 1SBH103004R8853 6/23 TF42-0.55 1SAZ721201R1017 7/8 RV5/50 1SBN050010R1000 4/37 NSL62E-81 1SBH103001R8162 4/63 TF42-0.74 1SAZ721201R1021 7/8 RV-BC6/250 GHV2501903R0002 3/39 NSL62E-83 1SBH103001R8362 4/63 TF42-1.0 1SAZ721201R1023 7/8 RV-BC6/380 GHV2501904R0002 3/39 NSL62E-86 1SBH103001R8662 4/63 TF42-1.3 1SAZ721201R1025 7/8 RV-BC6/60 GHV2501902R0002 3/39 NSL62E-88 1SBH103001R8862 4/63 TF42-1.7 1SAZ721201R1028 7/8 RV-BC6-F/250 GHV2501903R0003 3/39 NSL62ES-81 1SBH103004R8162 6/23 TF42-10 1SAZ721201R1043 7/8 RV-BC6-F/380 GHV2501904R0003 3/39 NSL62ES-83 1SBH103004R8362 6/23 TF42-13 1SAZ721201R1045 7/8 RV-BC6-F/60 GHV2501902R0003 3/39 NSL62ES-86 1SBH103004R8662 6/23 TF42-16 1SAZ721201R1047 7/8 S1-M1-25 1SAM201907R1101 2/20 NSL62ES-88 1SBH103004R8862 6/23 TF42-2.3 1SAZ721201R1031 7/8 S1-M2-25 1SAM201907R1102 2/20 NSL71E-81 1SBH103001R8171 4/63 TF42-20 1SAZ721201R1049 7/8 S1-M3-25 1SAM201907R1103 2/20 NSL71E-83 1SBH103001R8371 4/63 TF42-24 1SAZ721201R1051 7/8 S1-M3-35 1SAM201913R1103 2/20 NSL71E-86 1SBH103001R8671 4/63 TF42-29 1SAZ721201R1052 7/8 S1-PB1-25 1SAM201914R1002 2/20 NSL71E-88 1SBH103001R8871 4/63 TF42-3.1 1SAZ721201R1033 7/8 S4-M1 1SAM401911R1007 2/35 NSL71ES-81 1SBH103004R8171 6/23 TF42-35 1SAZ721201R1053 7/8 S801S-SCL100-SR 2CCS801901R0639 11/2 NSL71ES-83 1SBH103004R8371 6/23 TF42-38 1SAZ721201R1055 7/8 S801S-SCL32-SR 2CCS801901R0539 11/2 NSL71ES-86 1SBH103004R8671 6/23 TF42-4.2 1SAZ721201R1035 7/8 S801S-SCL63-SR 2CCS801901R0599 11/2 NSL71ES-88 1SBH103004R8871 6/23 TF42-5.7 1SAZ721201R1038 7/8 S802S-SCL100-SR 2CCS802901R0639 11/2 NSL80E-81 1SBH103001R8180 4/63 TF42-7.6 1SAZ721201R1040 7/8 S802S-SCL32-SR 2CCS802901R0539 11/2 NSL80E-83 1SBH103001R8380 4/63 TF65-28 1SAZ811201R1001 7/12 S802S-SCL63-SR 2CCS802901R0599 11/2 NSL80E-86 1SBH103001R8680 4/63 TF65-33 1SAZ811201R1002 7/12 S803S-SCL100-SR 2CCS803901R0639 11/2 NSL80E-88 1SBH103001R8880 4/63 TF65-40 1SAZ811201R1003 7/12 S803S-SCL32-SR 2CCS803901R0539 11/2 NSL80ES-81 1SBH103004R8180 6/23 TF65-47 1SAZ811201R1004 7/12 S803S-SCL63-SR 2CCS803901R0599 11/2 NSL80ES-83 1SBH103004R8380 6/23 TF65-53 1SAZ811201R1005 7/12 S803W-SCL100-SR 2CCS803917R0639 11/2 NSL80ES-86 1SBH103004R8680 6/23 TF65-60 1SAZ811201R1006 7/12 S803W-SCL32-SR 2CCS803917R0539 11/2 NSL80ES-88 1SBH103004R8880 6/23 TF65-67 1SAZ811201R1007 7/12 S803W-SCL63-SR 2CCS803917R0599 11/2 OESA460H/OESA400 1SFN085709R1000 5/352 TF96-51 1SAZ911201R1001 7/16 SA1 GJF1101903R0001 2/20 OXS6X105 1SCA108043R1001 2/38 TF96-60 1SAZ911201R1002 7/16 SA2 GJF1101903R0002 2/20 OXS6X130 1SCA101655R1001 2/38 TF96-68 1SAZ911201R1003 7/16 SA3 GJF1101903R0003 2/20 OXS6X180 1SCA101659R1001 2/38 TF96-78 1SAZ911201R1004 7/16 SK1-02 1SAM201903R1003 2/15 OXS6X85 1SCA101647R1001 2/38 TF96-87 1SAZ911201R1005 7/16 SK1-11 1SAM201903R1001 2/15 PB1-1-32 1SAM201914R1001 2/20 TF96-96 1SAZ911201R1006 7/16 SK1-20 1SAM201903R1002 2/15 PN460-11 1SFN095705R1000 5/353 TKC6-22Z-51 GJH1213061R5221 3/18 SK4-11 1SAM401904R1001 2/32 PN460-21 1SFN095701R1000 5/353 TKC6-22Z-55 GJH1213061R5225 3/18 SPRC 1 1SNA360010R1500 4/82 PN460-41 1SFN095703R1000 5/353 TKC6-22Z-62 GJH1213061R6222 3/18 T16-0.13 1SAZ711201R1005 7/4 PN750-11 1SFN096105R1000 5/353 TKC6-22Z-68 GJH1213061R6228 3/18 T16-0.17 1SAZ711201R1008 7/4 PN750-21 1SFN096101R1000 5/353 TKC6-31Z-51 GJH1213061R5311 3/18 T16-0.23 1SAZ711201R1009 7/4 PN750-41 1SFN096103R1000 5/353 TKC6-31Z-55 GJH1213061R5315 3/18 T16-0.31 1SAZ711201R1013 7/4 PR146-1 1SFN094200R1000 5/354 TKC6-31Z-62 GJH1213061R6312 3/18 T16-0.41 1SAZ711201R1014 7/4 PR185-2 1SFN095100R1001 5/354 TKC6-31Z-68 GJH1213061R6318 3/18 T16-0.55 1SAZ711201R1017 7/4 PR210-1 1SFN094900R1000 5/354 TKC6-40E-51 GJH1213061R5401 3/18 T16-0.74 1SAZ711201R1021 7/4 PR300-1 1SFN095300R1000 5/354 TKC6-40E-55 GJH1213061R5405 3/18 T16-1.0 1SAZ711201R1023 7/4 PR300-2 1SFN095300R1001 5/354 TKC6-40E-62 GJH1213061R6402 3/18 Index 13 ABB | 13/17 Index Type classification 13 Order code Page Type Order code Page Type Order code Page TKC6-40E-68 GJH1213061R6408 3/18 1SBL351024R8400 5/267 VAS16EM-16M 1SBK123600M1600 4/46 UA110-30-00 1SFL451022R8000 5/279 1SBL351024R8500 5/267 VAS16EM-20M 1SBK123600M2000 4/46 1SFL451022R8100 5/279 1SBL351024R8600 5/267 VAS16EM-26M 1SBK123600M2600 4/46 1SFL451022R8300 5/279 1SBL351024R8800 5/267 VAS16EM-28M 1SBK123600M2800 4/46 1SFL451022R8400 5/279 UA50-30-11 1SBL351022R8011 5/278 VAS16SEM-16M 1SBK123800M1600 4/46 1SFL451022R8500 5/279 1SBL351022R8111 5/278 VAS16SEM-20M 1SBK123800M2000 4/46 1SFL451022R8600 5/279 1SBL351022R8311 5/278 VAS16SEM-26M 1SBK123800M2600 4/46 1SFL451022R8800 5/279 1SBL351022R8411 5/278 VAS16SEM-28M 1SBK123800M2800 4/46 UA110-30-00RA 1SFL451024R8000 5/268 1SBL351022R8511 5/278 VASL09EM-81M 1SBK103700M8100 4/47 1SFL451024R8100 5/268 1SBL351022R8611 5/278 VASL09EM-83M 1SBK103700M8300 4/47 1SFL451024R8300 5/268 1SBL351022R8811 5/278 VASL09EM-86M 1SBK103700M8600 4/47 1SFL451024R8400 5/268 UA63-30-00 1SBL371022R8000 5/277 VASL09EM-88M 1SBK103700M8800 4/47 1SFL451024R8500 5/268 1SBL371022R8100 5/277 VASL09SEM-81M 1SBK103900M8100 4/47 1SFL451024R8600 5/268 1SBL371022R8300 5/277 VASL09SEM-83M 1SBK103900M8300 4/47 1SFL451024R8800 5/268 1SBL371022R8400 5/277 VASL09SEM-86M 1SBK103900M8600 4/47 UA110-30-11 1SFL451022R8011 5/280 1SBL371022R8500 5/277 VASL09SEM-88M 1SBK103900M8800 4/47 1SFL451022R8111 5/280 1SBL371022R8600 5/277 VASL12EM-81M 1SBK113700M8100 4/47 1SFL451022R8311 5/280 1SBL371022R8800 5/277 VASL12EM-83M 1SBK113700M8300 4/47 1SFL451022R8411 5/280 UA63-30-00RA 1SBL371024R8000 5/267 VASL12EM-86M 1SBK113700M8600 4/47 1SFL451022R8511 5/280 1SBL371024R8100 5/267 VASL12EM-88M 1SBK113700M8800 4/47 1SFL451022R8611 5/280 1SBL371024R8300 5/267 VASL12SEM-81M 1SBK113900M8100 4/47 1SFL451022R8811 5/280 1SBL371024R8400 5/267 VASL12SEM-83M 1SBK113900M8300 4/47 UA1-110 1SAM201904R1004 2/16 1SBL371024R8500 5/267 VASL12SEM-86M 1SBK113900M8600 4/47 UA1-20 1SAM201904R1010 2/16 1SBL371024R8600 5/267 VASL12SEM-88M 1SBK113900M8800 4/47 UA1-208 1SAM201904R1008 2/16 1SBL371024R8800 5/267 VASL16EM-81M 1SBK123700M8100 4/47 UA1-230 1SAM201904R1005 2/16 UA63-30-11 1SBL371022R8011 5/278 VASL16EM-83M 1SBK123700M8300 4/47 UA1-24 1SAM201904R1001 2/16 1SBL371022R8111 5/278 VASL16EM-86M 1SBK123700M8600 4/47 UA1-400 1SAM201904R1006 2/16 1SBL371022R8311 5/278 VASL16EM-88M 1SBK123700M8800 4/47 UA1-415 1SAM201904R1007 2/16 1SBL371022R8411 5/278 VASL16SEM-81M 1SBK123900M8100 4/47 UA1-48 1SAM201904R1002 2/16 1SBL371022R8511 5/278 VASL16SEM-83M 1SBK123900M8300 4/47 UA1-575 1SAM201904R1009 2/16 1SBL371022R8611 5/278 VASL16SEM-86M 1SBK123900M8600 4/47 UA1-60 1SAM201904R1003 2/16 1SBL371022R8811 5/278 VASL16SEM-88M 1SBK123900M8800 4/47 UA16-30-10 1SBL181022R8010 5/276 UA75-30-00 1SBL411022R8000 5/277 VB6-30-01-01 GJL1211901R0011 3/6 1SBL181022R8110 5/276 1SBL411022R8100 5/277 VB6-30-01-02 GJL1211901R0012 3/6 1SBL181022R8310 5/276 1SBL411022R8300 5/277 VB6-30-01-03 GJL1211901R0013 3/6 1SBL181022R8410 5/276 1SBL411022R8400 5/277 VB6-30-01-80 GJL1211901R8010 3/6 1SBL181022R8510 5/276 1SBL411022R8500 5/277 VB6-30-01-84 GJL1211901R8014 3/6 1SBL181022R8610 5/276 1SBL411022R8600 5/277 VB6-30-01-85 GJL1211901R8015 3/6 1SBL181022R8810 5/276 1SBL411022R8800 5/277 VB6-30-01-P-01 GJL1211909R0011 3/21 UA16-30-10RA 1SBL181024R8010 5/266 UA75-30-00RA 1SBL411024R8000 5/267 VB6-30-01-P-02 GJL1211909R0012 3/21 1SBL181024R8110 5/266 1SBL411024R8100 5/267 VB6-30-01-P-03 GJL1211909R0013 3/21 1SBL181024R8310 5/266 1SBL411024R8300 5/267 VB6-30-01-P-80 GJL1211909R8010 3/21 1SBL181024R8410 5/266 1SBL411024R8400 5/267 VB6-30-01-P-84 GJL1211909R8014 3/21 1SBL181024R8510 5/266 1SBL411024R8500 5/267 VB6-30-01-P-85 GJL1211909R8015 3/21 1SBL181024R8610 5/266 1SBL411024R8600 5/267 VB6-30-10-01 GJL1211901R0101 3/6 1SBL181024R8810 5/266 1SBL411024R8800 5/267 VB6-30-10-02 GJL1211901R0102 3/6 UA26-30-10 1SBL241022R8010 5/276 UA75-30-11 1SBL411022R8011 5/278 VB6-30-10-03 GJL1211901R0103 3/6 1SBL241022R8110 5/276 1SBL411022R8111 5/278 VB6-30-10-80 GJL1211901R8100 3/6 1SBL241022R8310 5/276 1SBL411022R8311 5/278 VB6-30-10-84 GJL1211901R8104 3/6 1SBL241022R8410 5/276 1SBL411022R8411 5/278 VB6-30-10-85 GJL1211901R8105 3/6 1SBL241022R8510 5/276 1SBL411022R8511 5/278 VB6-30-10-P-01 GJL1211909R0101 3/21 1SBL241022R8610 5/276 1SBL411022R8611 5/278 VB6-30-10-P-02 GJL1211909R0102 3/21 1SBL241022R8810 5/276 1SBL411022R8811 5/278 VB6-30-10-P-03 GJL1211909R0103 3/21 UA26-30-10RA 1SBL241024R8010 5/266 UA95-30-00 1SFL431022R8000 5/279 VB6-30-10-P-80 GJL1211909R8100 3/21 1SBL241024R8110 5/266 1SFL431022R8100 5/279 VB6-30-10-P-84 GJL1211909R8104 3/21 1SBL241024R8310 5/266 1SFL431022R8300 5/279 VB6-30-10-P-85 GJL1211909R8105 3/21 1SBL241024R8410 5/266 1SFL431022R8400 5/279 VB6A-30-01-01 GJL1211911R0011 3/8 1SBL241024R8510 5/266 1SFL431022R8500 5/279 VB6A-30-01-02 GJL1211911R0012 3/8 1SBL241024R8610 5/266 1SFL431022R8600 5/279 VB6A-30-01-03 GJL1211911R0013 3/8 1SBL241024R8810 5/266 1SFL431022R8800 5/279 VB6A-30-01-80 GJL1211911R8010 3/8 UA30-30-10 1SBL281022R8010 5/276 UA95-30-00RA 1SFL431024R8000 5/268 VB6A-30-01-84 GJL1211911R8014 3/8 1SBL281022R8110 5/276 1SFL431024R8100 5/268 VB6A-30-01-85 GJL1211911R8015 3/8 1SBL281022R8310 5/276 1SFL431024R8300 5/268 VB6A-30-01-P-01 GJL1211919R0011 3/23 1SBL281022R8410 5/276 1SFL431024R8400 5/268 VB6A-30-01-P-02 GJL1211919R0012 3/23 1SBL281022R8510 5/276 1SFL431024R8500 5/268 VB6A-30-01-P-03 GJL1211919R0013 3/23 1SBL281022R8610 5/276 1SFL431024R8600 5/268 VB6A-30-01-P-80 GJL1211919R8010 3/23 1SBL281022R8810 5/276 1SFL431024R8800 5/268 VB6A-30-01-P-84 GJL1211919R8014 3/23 UA30-30-10RA 1SBL281024R8010 5/266 UA95-30-11 1SFL431022R8011 5/280 VB6A-30-01-P-85 GJL1211919R8015 3/23 1SBL281024R8110 5/266 1SFL431022R8111 5/280 VB6A-30-10-01 GJL1211911R0101 3/8 1SBL281024R8310 5/266 1SFL431022R8311 5/280 VB6A-30-10-02 GJL1211911R0102 3/8 1SBL281024R8410 5/266 1SFL431022R8411 5/280 VB6A-30-10-03 GJL1211911R0103 3/8 1SBL281024R8510 5/266 1SFL431022R8511 5/280 VB6A-30-10-80 GJL1211911R8100 3/8 1SBL281024R8610 5/266 1SFL431022R8611 5/280 VB6A-30-10-84 GJL1211911R8104 3/8 1SBL281024R8810 5/266 1SFL431022R8811 5/280 VB6A-30-10-85 GJL1211911R8105 3/8 UA4-110 1SAM401905R1001 2/32 VAS09EM-16M 1SBK103600M1600 4/46 VB6A-30-10-P-01 GJL1211919R0101 3/23 UA4-230 1SAM401905R1002 2/32 VAS09EM-20M 1SBK103600M2000 4/46 VB6A-30-10-P-02 GJL1211919R0102 3/23 UA4-24 1SAM401905R1004 2/32 VAS09EM-26M 1SBK103600M2600 4/46 VB6A-30-10-P-03 GJL1211919R0103 3/23 UA4-400 1SAM401905R1003 2/32 VAS09EM-28M 1SBK103600M2800 4/46 VB6A-30-10-P-80 GJL1211919R8100 3/23 UA4-HK-230 1SAM401906R1001 2/32 VAS09SEM-16M 1SBK103800M1600 4/46 VB6A-30-10-P-84 GJL1211919R8104 3/23 UA4-HK-400 1SAM401906R1002 2/32 VAS09SEM-20M 1SBK103800M2000 4/46 VB6A-30-10-P-85 GJL1211919R8105 3/23 UA50-30-00 1SBL351022R8000 5/277 VAS09SEM-26M 1SBK103800M2600 4/46 VB7-30-01-01 GJL1311901R0011 3/6 1SBL351022R8100 5/277 VAS09SEM-28M 1SBK103800M2800 4/46 VB7-30-01-02 GJL1311901R0012 3/6 1SBL351022R8300 5/277 VAS12EM-16M 1SBK113600M1600 4/46 VB7-30-01-03 GJL1311901R0013 3/6 1SBL351022R8400 5/277 VAS12EM-20M 1SBK113600M2000 4/46 VB7-30-01-80 GJL1311901R8010 3/6 1SBL351022R8500 5/277 VAS12EM-26M 1SBK113600M2600 4/46 VB7-30-01-84 GJL1311901R8014 3/6 1SBL351022R8600 5/277 VAS12EM-28M 1SBK113600M2800 4/46 VB7-30-01-85 GJL1311901R8015 3/6 1SBL351022R8800 5/277 VAS12SEM-16M 1SBK113800M1600 4/46 VB7-30-01-F-01 GJL1311903R0011 3/31 UA50-30-00RA 1SBL351024R8000 5/267 VAS12SEM-20M 1SBK113800M2000 4/46 VB7-30-01-F-02 GJL1311903R0012 3/31 1SBL351024R8100 5/267 VAS12SEM-26M 1SBK113800M2600 4/46 VB7-30-01-F-03 GJL1311903R0013 3/31 1SBL351024R8300 5/267 VAS12SEM-28M 1SBK113800M2800 4/46 VB7-30-01-F-80 GJL1311903R8010 3/31 13/18 | ABB Index Type Index Type classification Order code Page VB7-30-01-F-84 GJL1311903R8014 3/31 VB7-30-01-F-85 GJL1311903R8015 3/31 VB7-30-01-P-01 GJL1311909R0011 3/21 VB7-30-01-P-02 GJL1311909R0012 3/21 VB7-30-01-P-03 GJL1311909R0013 3/21 VB7-30-01-P-80 GJL1311909R8010 3/21 VB7-30-01-P-84 GJL1311909R8014 3/21 VB7-30-01-P-85 GJL1311909R8015 3/21 VB7-30-10-01 GJL1311901R0101 3/6 VB7-30-10-02 GJL1311901R0102 3/6 VB7-30-10-03 GJL1311901R0103 3/6 VB7-30-10-80 GJL1311901R8100 3/6 VB7-30-10-84 GJL1311901R8104 3/6 VB7-30-10-85 GJL1311901R8105 3/6 VB7-30-10-F-01 GJL1311903R0101 3/31 VB7-30-10-F-02 GJL1311903R0102 3/31 VB7-30-10-F-03 GJL1311903R0103 3/31 VB7-30-10-F-80 GJL1311903R8100 3/31 VB7-30-10-F-84 GJL1311903R8104 3/31 VB7-30-10-F-85 GJL1311903R8105 3/31 VB7-30-10-P-01 GJL1311909R0101 3/21 VB7-30-10-P-02 GJL1311909R0102 3/21 VB7-30-10-P-03 GJL1311909R0103 3/21 VB7-30-10-P-80 GJL1311909R8100 3/21 VB7-30-10-P-84 GJL1311909R8104 3/21 VB7-30-10-P-85 GJL1311909R8105 3/21 VB7A-30-01-01 GJL1311911R0011 3/8 VB7A-30-01-02 GJL1311911R0012 3/8 VB7A-30-01-03 GJL1311911R0013 3/8 VB7A-30-01-80 GJL1311911R8010 3/8 VB7A-30-01-84 GJL1311911R8014 3/8 VB7A-30-01-85 GJL1311911R8015 3/8 VB7A-30-01-F-01 GJL1311913R0011 3/33 VB7A-30-01-F-02 GJL1311913R0012 3/33 VB7A-30-01-F-03 GJL1311913R0013 3/33 VB7A-30-01-F-80 GJL1311913R8010 3/33 VB7A-30-01-F-84 GJL1311913R8014 3/33 VB7A-30-01-F-85 GJL1311913R8015 3/33 VB7A-30-01-P-01 GJL1311919R0011 3/23 VB7A-30-01-P-02 GJL1311919R0012 3/23 VB7A-30-01-P-03 GJL1311919R0013 3/23 VB7A-30-01-P-80 GJL1311919R8010 3/23 VB7A-30-01-P-84 GJL1311919R8014 3/23 VB7A-30-01-P-85 GJL1311919R8015 3/23 VB7A-30-10-01 GJL1311911R0101 3/8 VB7A-30-10-02 GJL1311911R0102 3/8 VB7A-30-10-03 GJL1311911R0103 3/8 VB7A-30-10-80 GJL1311911R8100 3/8 VB7A-30-10-84 GJL1311911R8104 3/8 VB7A-30-10-85 GJL1311911R8105 3/8 VB7A-30-10-F-01 GJL1311913R0101 3/33 VB7A-30-10-F-02 GJL1311913R0102 3/33 VB7A-30-10-F-03 GJL1311913R0103 3/33 VB7A-30-10-F-80 GJL1311913R8100 3/33 VB7A-30-10-F-84 GJL1311913R8104 3/33 VB7A-30-10-F-85 GJL1311913R8105 3/33 VB7A-30-10-P-01 GJL1311919R0101 3/23 VB7A-30-10-P-02 GJL1311919R0102 3/23 VB7A-30-10-P-03 GJL1311919R0103 3/23 VB7A-30-10-P-80 GJL1311919R8100 3/23 VB7A-30-10-P-84 GJL1311919R8104 3/23 VB7A-30-10-P-85 GJL1311919R8105 3/23 VBC6-30-01-01 GJL1213901R0011 3/7 VBC6-30-01-03 GJL1213901R0013 3/7 VBC6-30-01-04 GJL1213901R0014 3/7 VBC6-30-01-05 GJL1213901R0015 3/7 VBC6-30-01-07 GJL1213901R0017 3/7 VBC6-30-01-16 GJL1213901R1016 3/7 VBC6-30-01-P-01 GJL1213909R0011 3/22 VBC6-30-01-P-03 GJL1213909R0013 3/22 VBC6-30-01-P-04 GJL1213909R0014 3/22 VBC6-30-01-P-05 GJL1213909R0015 3/22 VBC6-30-01-P-07 GJL1213909R0017 3/22 VBC6-30-06-P-06 GJL1213909R0016 3/22 VBC6-30-10-01 GJL1213901R0101 3/7 VBC6-30-10-03 GJL1213901R0103 3/7 VBC6-30-10-04 GJL1213901R0104 3/7 VBC6-30-10-05 GJL1213901R0105 3/7 VBC6-30-10-07 GJL1213901R0107 3/7 VBC6-30-10-16 GJL1213901R1106 3/7 VBC6-30-10-P-01 GJL1213909R0101 3/22 VBC6-30-10-P-03 GJL1213909R0103 3/22 VBC6-30-10-P-04 GJL1213909R0104 3/22 VBC6-30-10-P-05 GJL1213909R0105 3/22 VBC6-30-10-P-06 GJL1213909R0106 3/22 VBC6-30-10-P-07 GJL1213909R0107 3/22 VBC6A-30-01-01 GJL1213911R0011 3/9 VBC6A-30-01-03 GJL1213911R0013 3/9 VBC6A-30-01-04 GJL1213911R0014 3/9 VBC6A-30-01-05 GJL1213911R0015 3/9 Type Order code Page Type Order code Page VBC6A-30-01-07 GJL1213911R0017 3/9 VM96-4 1SBN033405T1000 5/87 VBC6A-30-01-16 GJL1213911R1016 3/9 WB75-A FPTN372726R1001 5/342 FPTN372726R1002 5/342 VBC6A-30-10-01 GJL1213911R0101 3/9 FPTN372726R1003 5/342 VBC6A-30-10-03 GJL1213911R0103 3/9 FPTN372726R1004 5/342 VBC6A-30-10-04 GJL1213911R0104 3/9 FPTN372726R1005 5/342 VBC6A-30-10-05 GJL1213911R0105 3/9 FPTN372726R1006 5/342 VBC6A-30-10-07 GJL1213911R0107 3/9 FPTN372726R1007 5/342 VBC6A-30-10-16 GJL1213911R1106 3/9 FPTN372726R1008 5/342 VBC7-30-01-01 GJL1313901R0011 3/7 WRB-1000 1SAZ701903R1013 7/51 VBC7-30-01-03 GJL1313901R0013 3/7 WRB-400 1SAZ701903R1011 7/51 VBC7-30-01-04 GJL1313901R0014 3/7 WRB-600 1SAZ701903R1012 7/51 VBC7-30-01-05 GJL1313901R0015 3/7 WRBG 1SAZ701903R1030 7/51 VBC7-30-01-07 GJL1313901R0017 3/7 WRH-F 1SAZ701903R1001 7/51 VBC7-30-01-16 GJL1313901R1016 3/7 ZA110 1SFN154310R8006 5/380 VBC7-30-01-F-01 GJL1313903R0011 3/32 1SFN154310R8106 5/380 VBC7-30-01-F-03 GJL1313903R0013 3/32 1SFN154310R8306 5/380 VBC7-30-01-F-04 GJL1313903R0014 3/32 1SFN154310R8406 5/380 VBC7-30-01-F-05 GJL1313903R0015 3/32 1SFN154310R8506 5/380 VBC7-30-01-F-07 GJL1313903R0017 3/32 1SFN154310R8606 5/380 VBC7-30-01-F-16 GJL1313903R1016 3/32 1SFN154310R8806 5/380 VBC7-30-01-P-01 GJL1313909R0011 3/22 ZA16 1SBN151410R8006 5/380 VBC7-30-01-P-03 GJL1313909R0013 3/22 1SBN151410R8106 5/380 VBC7-30-01-P-04 GJL1313909R0014 3/22 1SBN151410R8306 5/380 VBC7-30-01-P-05 GJL1313909R0015 3/22 1SBN151410R8406 5/380 VBC7-30-01-P-07 GJL1313909R0017 3/22 1SBN151410R8506 5/380 VBC7-30-01-P-16 GJL1313909R1016 3/22 1SBN151410R8606 5/380 VBC7-30-10-01 GJL1313901R0101 3/7 1SBN151410R8806 5/380 VBC7-30-10-03 GJL1313901R0103 3/7 ZA40 1SBN152410R8006 5/380 VBC7-30-10-04 GJL1313901R0104 3/7 1SBN152410R8106 5/380 VBC7-30-10-05 GJL1313901R0105 3/7 1SBN152410R8306 5/380 VBC7-30-10-07 GJL1313901R0107 3/7 1SBN152410R8406 5/380 VBC7-30-10-16 GJL1313901R1106 3/7 1SBN152410R8506 5/380 VBC7-30-10-F-01 GJL1313903R0101 3/32 1SBN152410R8606 5/380 VBC7-30-10-F-03 GJL1313903R0103 3/32 1SBN152410R8806 5/380 VBC7-30-10-F-04 GJL1313903R0104 3/32 ZA75 1SBN153510R8006 5/380 VBC7-30-10-F-05 GJL1313903R0105 3/32 1SBN153510R8106 5/380 VBC7-30-10-F-07 GJL1313903R0107 3/32 1SBN153510R8306 5/380 VBC7-30-10-F-16 GJL1313903R1106 3/32 1SBN153510R8406 5/380 VBC7-30-10-P-01 GJL1313909R0101 3/22 1SBN153510R8506 5/380 VBC7-30-10-P-03 GJL1313909R0103 3/22 1SBN153510R8606 5/380 VBC7-30-10-P-04 GJL1313909R0104 3/22 1SBN153510R8806 5/380 VBC7-30-10-P-05 GJL1313909R0105 3/22 ZAF1650 1SFN156570R7026 5/355 VBC7-30-10-P-07 GJL1313909R0107 3/22 ZAF2650 1SFN156670R7026 5/355 VBC7-30-10-P-16 GJL1313909R1106 3/22 ZAF460 1SFN155770R6806 5/355 VBC7A-30-01-01 GJL1313911R0011 3/9 1SFN155770R6906 5/355 VBC7A-30-01-03 GJL1313911R0013 3/9 1SFN155770R7006 5/355 VBC7A-30-01-04 GJL1313911R0014 3/9 1SFN155770R7106 5/355 VBC7A-30-01-05 GJL1313911R0015 3/9 ZAF750 1SFN156170R6806 5/355 VBC7A-30-01-07 GJL1313911R0017 3/9 1SFN156170R6906 5/355 VBC7A-30-01-16 GJL1313911R0016 3/9 1SFN156170R7006 5/355 VBC7A-30-01-F-01 GJL1313913R0011 3/34 1SFN156170R7106 5/355 VBC7A-30-01-F-03 GJL1313913R0013 3/34 ZL1250 1SFN166403R1000 5/355 VBC7A-30-01-F-04 GJL1313913R0014 3/34 ZL1350 1SFN166503R1000 5/355 VBC7A-30-01-F-05 GJL1313913R0015 3/34 ZL1650 1SFN166703R1000 5/355 VBC7A-30-01-F-07 GJL1313913R0017 3/34 ZL2050 1SFN167003R1000 5/355 VBC7A-30-01-F-16 GJL1313913R1016 3/34 ZL2650 1SFN166603R1000 5/355 VBC7A-30-01-P-01 GJL1313919R0011 3/24 ZL400 1SFN165703R1000 5/355 VBC7A-30-01-P-03 GJL1313919R0013 3/24 ZL460 1SFN165903R1000 5/355 VBC7A-30-01-P-04 GJL1313919R0014 3/24 ZL580 1SFN166103R1000 5/355 VBC7A-30-01-P-05 GJL1313919R0015 3/24 ZL750 1SFN166303R1000 5/355 VBC7A-30-01-P-07 GJL1313919R0017 3/24 ZLU110 1SFN164502R1000 5/380 VBC7A-30-01-P-16 GJL1313919R1016 3/24 ZLU50 1SBN163502R1000 5/380 VBC7A-30-10-01 GJL1313911R0101 3/9 ZLU63 1SBN163702R1000 5/380 VBC7A-30-10-03 GJL1313911R0103 3/9 ZLU75 1SBN164102R1000 5/380 VBC7A-30-10-04 GJL1313911R0104 3/9 ZLU95 1SFN164302R1000 5/380 VBC7A-30-10-05 GJL1313911R0105 3/9 ZP1650 1SFN166521R1070 5/355 VBC7A-30-10-07 GJL1313911R0107 3/9 ZP2650 1SFN166621R1070 5/355 VBC7A-30-10-16 GJL1313911R1106 3/9 ZW1650 1SFN166510R1000 5/355 VBC7A-30-10-F-01 GJL1313913R0101 3/34 ZW2650 1SFN166610R1000 5/355 VBC7A-30-10-F-03 GJL1313913R0103 3/34 ZW460 1SFN165710R1000 5/355 VBC7A-30-10-F-04 GJL1313913R0104 3/34 ZW750 1SFN166110R1000 5/355 VBC7A-30-10-F-05 GJL1313913R0105 3/34 VBC7A-30-10-F-07 GJL1313913R0107 3/34 VBC7A-30-10-F-16 GJL1313913R1106 3/34 VBC7A-30-10-P-01 GJL1313919R0101 3/24 VBC7A-30-10-P-03 GJL1313919R0103 3/24 VBC7A-30-10-P-04 GJL1313919R0104 3/24 VBC7A-30-10-P-05 GJL1313919R0105 3/24 VBC7A-30-10-P-07 GJL1313919R0107 3/24 VBC7A-30-10-P-16 GJL1313919R1106 3/24 VE5-2 1SBN030210R1000 5/368 VEM4 1SBN030111R1000 5/87 VM140/190 1SFN034403R1000 5/93 VM1650H 1SFN036503R1000 5/103 VM19 1SFN030300R1000 5/93 VM205/265 1SFN035203R1000 5/93 VM3 1SBN031005T1000 4/37 VM4 1SBN030105T1000 5/87 VM750H 1SFN035700R1000 5/103 VM750V 1SFN035701R1000 5/338 13 Index Type ABB | 13/19 Marketing material www.abb.com/connecttocontrol 14 14/0 | ABB Videos, prints, technical presentations and more New The AF range in your pocket The eBinder gives you all the information you need about the AF range. Videos Always updated DemacLenko Fabricant de canons à neige Prolonger la saison Distributeur Réduire les stocks pour une meilleure productivité 1SFC101008L0301 Always available 1SFC101009L0301 ADL et Free Tech Chauffage, Ventilation, Climatisation Gagner en flexibilité pour plus de rentabilité Le client De nombreuses stations de ski d'Europe, d'Amérique du Nord et d'Asie font confiance aux produits DemacLenko, pour maintenir leur domaine skiable ouvert, que la neige soit au rendez-vous ou non. La société offre des solutions de gestion d'enneigement clés en main, du plan directeur à la mise en service et la maintenance, en passant par les infrastructures, les stations de pompage et le stockage de l'eau. Ses canons à neige haute capacité peuvent générer jusqu'à 105 m3 de neige par heure. Sauf en cas de coupure de courant, bien entendu… La solution d'ABB DemacLenko s'est tourné vers ABB qui a pu trouver une solution simple et efficace : remplacer la technologie de contacteur classique par les contacteurs AF et leur technologie avancée. Les résultats ont été immédiats. Les pannes de contacteurs provoquées par les fluctuations de Le client tension ont pratiquement disparu. DemacLenko a en outre Une belle réussite entraîne son lot de contraintes. été impressionné par la qualité globale du produit, capable Une clientèle plus nombreuse implique des stocks de résister aux vibrations et au climat rigoureux, qui lui a plus importants, des stocks plus importants impliquent permis de réaliser des économies substantielles de temps une logistique plus complexe et une logistique et d'argent en termes d'entretien et de gestion. Autre complexe engendre des délais de livraison et des coûts avantage : un fabricant unique pour une gamme complète supplémentaires. Les grands distributeurs de composants d'équipements de démarrage moteur, ce qui simplifie la électriques doivent stocker, distribuer et gérer des quantités Le défi maintenance et rationalise l'assemblage. Compatibles à considérables de produits, notamment des dizaines de C'est ce qui est arrivé bien trop souvent à la station de ski la fois avec le courant AC et DC, sur réseau 50 ou 60 Hz, milliers de contacteurs. Ils doivent ainsi composer avec suédoise Funäsdal. Les conditions hivernales rigoureuses les contacteurs AF peuvent être utilisés partout dans le de fortes contraintes en termes d'espace et de logistique, exercent évidemment des contraintes extrêmes sur les monde. Leur plage de tension de commande plus large et pour garantir une distribution rapide et efficace. équipements d'enneigement : taux d'humidité élevé, leurs valeurs d'accrochage et de décrochage plus franches températures très basses et vibrations constantes. De plus, garantissent un fonctionnement stable, même en cas de Le défi Le client La solution la longueur démesurée de certains câbles provoquait des fluctuations de tension. Pour les distributeurs de produits électriques, les livraisons La division Produits Basse Tension d'ABB dispose de plus Les tableaux MNS d'ABB intègrent les technologies fluctuations de tension endommageant les contacteurs, doivent absolument être rapides et efficaces. Le succès est de 40 ans d'expérience dans lacool, construction decontrôle. tableaux de tableaux les plus avancées du marché. La réduction des ce qui engendrait des interruptions de service et des arrêts Pour rester prenez le source d'expansion, d'élargissement de la clientèle et de basse tension. Une collaboration étroite avec un large éventail pertes d'énergie au sein des tableaux peut atteindre jusqu'à coûteux pour la station. Que faire ? de clients nous a permis de concevoir une solution adaptée 28 %. Le contacteur AF, doté d'une bobine à commande croissance exponentielle des commandes. Une bonne chose, ABB France à tous les besoins.Division Les nouveaux tableaux MNS, équipés électronique, a démontré ses nombreux avantages par certes, mais également un défi à relever. La grande variété Produits Basse Tension de la gamme de contacteurs AF, permettent une réduction rapport aux technologies de contacteurs classiques. Ces de contacteurs disponibles implique en effet une gestion plus Activité Basse Tension lourde, une logistique plus complexe et une augmentation des pertes d'énergie pouvant atteindre 28 %, tout en offrant avantages se traduisent par une fonctionnalité accrue La solution d'ABB des fonctionnalitéswww.abb.fr et une durée de vie accrues. du système MNS comparé aux technologies équivalentes des stocks. À ces nombreux produits viennent s’ajouter SSAB cherchait à disposer d'une alimentation constante disponibles aujourd'hui. La réduction des pertes d'énergieles accessoires supplémentaires, participant à leur tour à et stable, sans devoir recourir à des systèmes d'alimentation l’augmentation des stocks. Tous ces paramètres peuvent Le défi entraîne une prolongation de la durée de vie et de la sans interruption (UPS) ou de secours sur batterie. Il arrivait Dans l'industrie, le temps, c'est de l'argent. Les tendances disponibilité de tous les composants du système MNS. compromettre l'efficacité des distributeurs en termes de que les contacteurs classiques restent soudés en position récentes sur le marché des tableaux basse tension indiquent En résumé, le système MNS, équipé de contacteurs AF, délais de livraison. Les contacteurs AF d'ABB contribuent à fermée suite à des coupures de tension résultant de l'instabilité résoudre ce problème. une orientation vers des complexes industriels plus vastes. permet d'économiser de l'énergie, du temps, et donc, du réseau électrique. Ne pouvant s'affranchir des coupures L'efficacité énergétique est importante pour rester compétitif de l'argent. elles-mêmes, SSAB s'est tournée vers ABB, qui lui a tout en se développant. Les clients d'ABB cherchent ainsi proposé une solution en conformité avec la norme SEMI-F47 à améliorer l'efficacité énergétique de chaque aspect de leur Pour mieux gérer votre énergie, prenez le contrôle. d'immunité à ces coupures de tension : les contacteurs AF à activité. ABB a identifié qu'il était possible d'économiser une commande électronique. quantité importante d'énergie, et donc d'argent, en réduisant ABB France Division Produits Basse Tension les pertes directement au sein des tableaux. C'est dans cette Activité Basse Tension optique qu'a été développé le nouveau tableau MNS, équipé Pour une alimentation sans interruption, prenez le contrôle. du contacteur AF. www.abb.fr ABB France Division Produits Basse Tension Activité Basse Tension 1SFC101013L0301 Le client Important producteur d'acier, SSAB est leader sur le marché de niche de l'acier haute résistance. Avec des usines en Suède et aux États-Unis, ainsi que des opérations de finition en Chine, l'entreprise compte plus de 9 000 employés, répartis dans 45 pays. Les hauts fourneaux et les fourneaux électriques de SSAB consomment énormément d'électricité et imposent des contraintes extrêmes sur la fourniture d'énergie en termes de performance et de fiabilité. Pour garantir la continuité du fonctionnement de ses générateurs, SSAB exige que ses équipements de commande moteur soient certifiés SEMI-F47 (résistance aux coupures de tension). ABB est l'un des rares fournisseurs capables de satisfaire les exigences strictes de cette norme. Le défi La défaillance des contacteurs suite à des coupures de tension (contacteur soudé en position fermée) engendrait des temps d'arrêt non planifiés, des pertes de production et des coûts importants liés à leur remplacement. Cela mettait en danger la production ainsi que la sécurité des opérateurs. En effet, la transformation du minerai en fusion à une température d'environ 1 300 °C rend toute interruption potentiellement dangereuse et un arrêt trop long risque de figer la matière à l'intérieur des fours. SSAB devait trouver une solution offrant des performances constantes et flexibles, y compris dans ces conditions extrêmes. Stay connected! 1SFC101011L0301 SSAB Production d’acier Quand la fiabilité devient la norme 1SFC101006L0301 ABB – Tableaux et Systèmes Construction de tableaux Fonctionnalité et durée de vie accrues La solution d'ABB Grâce à sa bobine électronique, le contacteur AF fonctionne sur une plage de tension élargie, sur les réseaux 50 et 60 Hz, en AC ou en DC. En outre, le limiteur de surtension est intégré au contacteur. En combinant autant de fonctionnalités dans un seul et même contacteur, la gamme AF offre non seulement des performances techniques exceptionnelles, mais permet également une réduction considérable, jusqu'à 90 %, du nombre de variantes nécessaires. L'offre est passée Le client de 45 références de bobines pour couvrir toute la plage les OEM du secteur CVC (chauffage, de tension à seulement 4Bonne avec lanouvelle gammepour de contacteurs ventilation, Russie, l'un de nos principaux AF. Ces contacteurs permettent uneclimatisation). réduction desEnfrais marchés, la profite croissance rapide d'administration et de logistique qui à la fois auxdu secteur entraîne des conséquences difficiles à maîtriser distributeurs et aux utilisateurs finaux. L'extension de la : explosion du niveau des stocks et des coûts administratifs. C'est le problème auquel ont clientèle n'est ainsi plus synonyme d'augmentation ingérable été confrontés et Freedes Tech, deux fournisseurs moscovites et coûteuse des stocks. Plus besoin de ADL proposer CVC. produits spécifiques pourdu lessecteur tensions non standard : avec seulement quatre bobines, la technologie AF gère toutes les Le20 défi tensions de commande de à 500 V AC/DC. fil de et la leur croissance marché CVC russe, les entreprises Avec leur technologie de Au bobine gammedu complète comme et Free dans Tech ont d’accessoires, les contacteurs AFADL se situent uneété contraintes de gonfler considérablement afin de pouvoir répondre à catégorie à part, répondant aux besoins deleurs tousstocks les clients. la forte demande. L'accroissement et la diversification de la ont par ailleurs entraîné la nécessité de proposer Besoin de plus d'espaceclientèle et de simplicité, prenez le contrôle. toujours plus de produits. Il est donc devenu de plus en plus difficile d'assurer les livraisons sous 48 heures. L'augmentation ABB France des stocks a, en outre, été accompagnée d'une augmentation Division Produits Basse Tension Activité Basse Tension des frais administratifs. Pour pouvoir continuer à servir efficacement leur large clientèle, ADL et Free Tech ont ainsi dû résoudre le problème posé par leurs stocks excessivement www.abb.fr volumineux. La solution d'ABB : le contacteur AF. La solution d'ABB Intégrant la toute dernière technologie de contrôle moteurs issue de notre expérience de leader du secteur de l'énergie et de l'automatisation, la nouvelle gamme de contacteurs AF redéfinit la norme en termes de contrôle industriel. Compatible à la fois avec les alimentations AC et DC, le contacteur AF fonctionne sur une plage de tension de commande considérablement plus large que les contacteurs classiques. Grâce à sa bobine électronique (limiteur de surtension intégré), un seul contacteur est capable de fonctionner sur une plage de 100-250 V. Il est en outre compatible avec les réseaux 50 et 60 Hz. En 2011, en adoptant les contacteurs AF d'ABB, ADL et Free Tech ont pu réduire leurs stocks de contacteurs de plus de 60 % et les frais de gestion associés de 40 %. Le respect de délais de livraison n'est pour eux désormais plus un problème, ce qui a permis à ces deux entreprises de rester en tête du marché en pleine croissance. La gamme AF offre de nombreux avantages, des années de recherche et de développement ont permis à ABB de réduire le nombre de variantes de produits de 90 %, tout en continuant à proposer un contacteur pour chaque application. Grâce à cette technologie, les fluctuations de tension ou les tensions de commande non standard ne sont plus un problème. Tools Vous avez besoin de plus de flexibilité, prenez le contrôle. ABB France Division Produits Basse Tension Activité Basse Tension www.abb.fr www.abb.fr Success stories Short-form control tactors tection and Motor pro tor starters, con Manual mo d relays rloa and ove Main catalog Main catalog Motor protection and control Manual motor starters, contactors and overload relays Cadenas portal: Download 2D or 3D files according to your needs (STEP, IGES...) Main catalog : 1SBC100192C0201 Short form catalog : 1SBC100180C0201 Panorama : 1SBC100191L0201 SOC II: Select the Optimized Coordination tables for your starter according to IEC or UL standard ABB | 14/1 1SBC101912S0201 For direct product details information, use product type or order code, ex: - www.abb.com/productdetails/AF09-30-10-13 or - www.abb.com/productdetails/1SBL137001R1310 14 ABB France Low Voltage Products Division 3, rue Jean Perrin F-69687 Chassieu cedex / France ABB STOTZ-KONTAKT GmbH Eppelheimer Straße 82 D-69123 Heidelberg / Germany Note We reserve the right to make technical changes or modify the contents of this document without prior notice. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB. Copyright© 2014 ABB - All rights reserved ABB AB Control Products Low Voltage Products SE-721 61 Västerås / Sweden You can find the address of your local sales organisation on the ABB home page www.abb.com/connecttocontrol www.abb.com/lowvoltage 1SBC100192C0201 - Printed in France (07.2014 PDF) Contact us
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Create Date : 2014:07:08 13:53:14+02:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2014:08:25 16:22:07+02:00 Subject : Title : Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Instance ID : uuid:e8f94876-e907-489f-bf5e-62b9b800be5d Original Document ID : adobe:docid:indd:82079db4-7336-11e0-9087-f8d7817714c2 Document ID : xmp.id:DD7DFE549606E411AEE4AA8530B18048 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:14FB8014D305E411B763E087A8D6481F Derived From Document ID : xmp.did:3729744E9219E111A18EA175AA3450C6 Derived From Original Document ID: adobe:docid:indd:82079db4-7336-11e0-9087-f8d7817714c2 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:07:08 13:53:14+02:00 Metadata Date : 2014:08:25 16:22:07+02:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Layout : TwoColumnRight Page Mode : UseOutlines Page Count : 792EXIF Metadata provided by EXIF.tools