Industrial Fan Catalogue ENGLISH 136815 Catalog

www.banvil2000.com

industrial

fans

ENVIRO FAN

C

ENVIRO

BREEZE

®

table of contents

industrial fans

planning your room

bronze series

silver series

gold series

platinum series

moisture resistant series

energy star series

control matrix

controls & accessories

fan guard instructions

www.banvil2000.com

ENVIRO FAN

C

ENVIRO

BREEZE

®

30% of your heating cost

50% of your cooling cost

save

An Envirofan System will

Planning your Ceiling Fan System

1. Refer to the specification charts to determine Envirofan model and area coverage.

2. Multiply building length times width to get square footage.

3. To create an energy efficient “air curtain” at shipping doors, plan one fan 15 to 20 feet

in front of each shipping door and allow only about half the recommended area

coverage for these fans.

4. Subtract square footage of shipping door fans from the total and divide the balance

by the area coverage of the Envirofan model to determine the number of fans for

your system.

6. Charts show figures for maximum speed. Your application may require lower speeds

and/or less area coverage, depending on fan height, cooling or heating function and

use of area below fans.

7. Distance from the floor, fan diameter, and the speed at which a fan will run, all affect

the effective area coverage.

8. For best results hang fans over aisles and traffic lanes in storage or warehouse areas.

9. Locate fans over heat generating equipment, such as furnaces, ovens, generators or

welding stations. This keeps the equipment heat circulated back to floor level.

10. For best results call your Envirofan representative for help with your system plan.

5. Example: Using Model 160F-7 (area coverage 2,100 sq. ft.)

• 90' x 390' = 35,100sq.ft.

• 4 shipping doors. 35,100sq.ft. less 4,800sq.ft.

for door area = 30,300 sq.ft.

• 30,300 divided by 2,100 sq.ft. coverage per fan = 14.4 fans.

• Hang 4 fans over shipping doors.

• Using the grid system, hang 14 fans in the remainder of

the area. One fan is positioned in the center of each square.

The illustration above is 90' wide by 390' long, and has 4 shipping doors.

90'

390'

Shipping Doors

X

XX

X

XX

Bronze Line

All Bronze Line HD commercial fans are complete with

corrosion resistant epoxy-coated metal blades.

Commercial Duty

FP36 FP36R FP36R-5W FP48 FP48R FP56 FP56-36 FP56R FP56R-36

FP48R-5W

Wiring

Model

Safety Cable

Cord/Lead Wire

CFM

Area (sq.ft.)

Velocity (ft/m)

Volts

Amps

Watts

RPM (max)

Diameter Sweep

Airflow

Weight

60"60" 60"

60"60" 60" 60"60" 60" 60" 60"60"60"

36"36" 36" 48"48" 48" 56" 56"56"56"

60"60" 60" 60" 60"60"60"

10,50010,500 10,500 18,00018,000 18,000 22,000 22,00022,00022,000

700700 700 1,4001,400 1,400 1,700 1,7001,7001,700

600600 600 600600 600 600 600600600

120120 120 120120 120 120 120120120

0.350.35 0.35

4040 40

0.500.50 0.50

5050 50

0.55 0.55

0.55

65 656565

360360 360 320320 320 280 280280280

plug-in 3+ground 4+ground plug-in 3+ground 4+ground plug-in plug-in 3+ground 3+ground

down only down only down only down only

up & down

9 lbs 9 lbs9 lbs

up & down up & down

11 lbs 11 lbs11 lbs

up & down up & down

13 lbs13 lbs13 lbs 14 lbs

up & down

ENVIRO FAN

C

1

year

Bronze

30% of your heating cost

50% of your cooling cost

save

*requires 106FR 5amp reversing

control

**with 36" downrod

• Downrod diameter 7/8" eg E962-36

• Corrosion-resistant epoxy prime and finish coat on all metal housing & blades

The aerodynamically curved-tip blade results in maximum air delivery.

• All metal, no plastic.

• Permanent lubricated sealed TPI ball bearings.

• Totally enclosed impedance protected motor. Non-polar, extra heavy duty capacitor.

• Use solid state infinite speed motor controls or church quiet control (WC103)

• Heavy cast yoke for easy infield downrod change.

• Customized downrod lengths over 36" available.

Also 16' cord with plug part# Cord-Wh16.

• For church quiet control use WC103 Control

for one fan only

**

** **

56"

48" or

36"

17.16"

15.16"

all Bronze models are curved tip

for easy infield downrod change

Silver Line

All Silver Line HD industrial fans are complete with

corrosion resistant epoxy-coated metal blades.

60F-9 60F-7

Wiring

Model

Safety Cable

Cord/Lead Wire

CFM

Area (sq.ft.)

Velocity (ft/m)

Volts

Amps

Watts

RPM (max)

Diameter Sweep

Airflow

Weight

60" 60"

56" 56"

27,500 27,500

1,800 1,800

600 600

120 120

0.70 0.70

75 75

320 320

3+ground plug-in

up & down

13 lbs

down only

13 lbs

• Downrod diameter 7/8" eg. E962-36

• Corrosion-resistant epoxy prime and finish

coat on all metal housing & blades

The aerodynamically curved-tip blade

results in maximum air delivery.

• All metal, no plastic.

• Permanent lubricated sealed TPI ball bearings.

• Totally enclosed impedance protected motor.

• Non-polar, weatherproof encapsulated,

extra heavy-duty capacitor.

• Use solid state infinite speed motor controls

or church quiet control. (WC103)

• Heavy cast yoke for easy infield

downrod change.

• Customized downrod lengths

over 36" available.

Also 16' cord with plug part# Cord-Wh16.

Silver

30% of your heating cost

50% of your cooling cost

save

Heavy Duty Industrial

3

year

ENVIRO FAN

C

Silver

for heavy duty industrial use

heavy duty motor application

more airflow - higher RPM`s

higher performance heavy duty fan

56"

48" or

36"

17.16"

15.16"

Silver Line features curve tip blades.

160F7-220V 160C7* 136C-10*

136F-10

Wiring

Safety Cable

Cord/Lead Wire

CFM

Area (sq.ft.)

Velocity (ft/m)

Volts

Amps

Watts

RPM (max)

Diameter Sweep

Airflow

Weight

38" - 39" 38" - 39" 38" - 39"

38" - 39"

16" 16" 16"16" 16" 16" 16"

56" 56" 56"56" 56" 36" 36"

38" - 39" 38" - 39" 38" - 39"

34,500 34,500 34,50034,500 34,500 12,000 12,000

2,100 2,100 2,1002,100 2,100 800 800

650 650 650650 650 650 650

120 120 220-240120 120 120 120

0.70 0.70 0.370.70

75 75 7575

0.70 0.36 0.36

75 35 35

350 350 350320 350 400 400

plug-in plug-in 2+groundplug-in plug-in plug-in 3+ground

down only

24 lbs

down only

24 lbs

down only

24 lbs

down only

24 lbs

down only

24 lbs

down only

17 lbs

up & down

17 lbs

*straight blade model

Gold

Extra Heavy Duty Industrial

• Downrod diameter 7/8" eg. E961-36

• Corrosion-resistant epoxy prime and finish coat on all metal housing & blade.

The aerodynamically curved-tip aluminum blade results in maximum air delivery.

• Customized downrod lengths over 36" available. Also 16' cord with plug part# Cord-Wh16.

• Pre-wired with 16" cord and built-in strain relief

• Use solid state infinite speed motor controls or church quiet control for one fan only (WC103)

• 9.5 mfd non-polar, weatherproof encapsulated, extra heavy-duty capacitor. (136F-10 has 4.0 uf capacitor)

• Permanent lubricated sealed TPI ball bearings.

• All metal, no plastic.

• Totally enclosed impedance protected cast motor.

• High grade cool steel motor laminations for maximum

energy efficiency & heat dissipation for longer life.

56"

48" or

36"

17.16"

15.16"

Gold Line

All Gold Line HD industrial fans are complete with

corrosion resistant epoxy-coated aluminum blades.

30% of your heating cost

50% of your cooling cost

save

ENVIRO FAN

C

Gold

for extra heavy duty industrial use

• rugged industrial application

• ideal for high ceilings

• longer life

• the fan specified most by engineers!

for easy infield downrod change

160F7 160F7-BRN 160F7-BK

Model

5

year

190A-7S 190A-18S

Wiring

Model

Safety Cable

Cord/Lead Wire

CFM

Area (sq.ft.)

Velocity (ft/m)

Volts

Amps

Watts

RPM (max)

Diameter Sweep

Airflow

Weight

N/A N/A N/A

16" 16" 16"

60" 60" 60"

43,500 43,500 43,500

2,400 2,400 2,400

740 740 740

120 120 220/240

0.78 0.78 0.38

90 90 90

285 285 285

plug-in cord plug-in cord plug-in cord

down only

23 lbs

down only

23 lbs

down only

23 lbs

Platinum

• High heat bearings -30°C to 175°C

• Neoprene deflection boot helps keep out

moisture and dust

• Neoprene sealed motor case and heavy

duty neoprene seals.

• Cold roll steel motor laminations for maximum

energy efficiency & heat dissipation.

• Sealed downrod for complete motor

moisture protection.

• Corrosion-resistant epoxy prime and finish

coat on all metal housing & blade. The

aerodynamically curved-tip aluminun blade

results in maximum air delivery.

• 9.5 mfd non-polar, weatherproof encapsulated,

extra heavy-duty capacitor.

• Totally enclosed .95 amp extra heavy duty, impedance

protected motor.

• Use solid state infinite speed motor controls or church

quiet control for one fan only (WC103)

• Permanent lubricated sealed TPI ball bearings.

• 7" or 18" downrod, 36" is available.

• Pre-wired with 16" cord and built-in strain relief

• All metal, no plastic.

• Cast iron motor casing.

Platinum Line

Severe Industrial Service

save

30% of your heating cost

50% of your cooling cost

All Platinum Line extra HD industrial fans are complete

with corrosion resistant epoxy-coated aluminum blades.

Spray proof, rust proof, heat & corrosion resistant.

for severe service

in damp locations

qualifies for IP55 - Rating

high heat bearings -30°C to 175°C

highest performance heavy duty fan

Platinum

ENVIRO

BREEZE

®

rating

qualifies for

IP55

3

year

for easy infield downrod exchange

190A-7S 220/240V

56"

48" or

36"

17.16"

15.16"

Platinum line features curve tipped blades.

180C-MR 180C-NM 180C-240NM 180C-277NM 185C-MR 185C-NM

Wiring

Model

Safety Cable

Cord/Lead Wire

CFM

Area (sq.ft.)

Velocity (ft/m)

Volts

Amps

Watts

RPM (max)

Diameter Sweep

Airflow

Weight

60" 60" 60" 60"

60" 60"

60" 60" 60" 60"

60" 60"

56" 56" 60" 60"

56" 56"

34,500 34,500 34,500 34,500

34,500 34,500

2,100 2,100 2,100 2,100

2,100 2,100

650 650 650 650

650 650

240 277 120 120

120 120

0.30 0.36 0.70 0.70

0.70 0.70

85 85 90 90

85 85

320 320 320 320

320 320

3+ground 3+ground 3+ground 3+ground 3+ground 3+ground

16 lbs 16 lbs 27 lbs 17 lbs

up & down up & down up & down up & down up & down up & down

16 lbs 16 lbs

MR = moisture resistant

NM = non-moisture resistant

Agricultural

Industrial/Commercial

Agricultural

All Agricultural industrial fans are complete with

corrosion resistant epoxy-coated metal blades.

5

year

ENVIRO FAN

C

Moisture Resistant

for agricultural use

• high performance application

• ideal where moisture resistance is necessary

• longer life

• Downrod diameter 7/8"

• Corrosion-resistant epoxy prime and finish coat on all metal housing & blade. The aerodynamically

curved-tip blade results in maximum air delivery.

• Customized downrod lengths over 36" available. Also 16' cord with plug part# Cord-Wh16.

• Pre-wired with 16" cord and built-in strain relief

• Use solid state infinite speed motor controls or church quiet control for one fan only (WC103)

• 9.5 mfd non-polar, weatherproof encapsulated, extra heavy-duty capacitor.

• Permanent lubricated sealed TPI ball bearings.

• All metal, no plastic.

• Totally enclosed impendance protected motor.

• Heavy cast yoke for easy infield downrod change.

Moisture Resistant, High Performance

moisture save

save30% of your heating cost

50% of your cooling cost

17.16"

15.16"

56"

48"

for easy infield downrod change

Moisture Resistant Line features straight blades.

Energy Star Line

All Energy Star HD industrial fans are complete with

corrosion resistant epoxy-coated metal blades.

Industrial Duty

Es56

Wiring

Model

Safety Cable

Cord/Lead Wire

CFM

Area (sq.ft.)

Velocity (ft/m)

Volts

Amps

Watts

RPM (max)

Diameter Sweep

Airflow

Weight

60"

56"

60"

22,000

1,700

600

120

0.55

61

320

plug-in

down only

13 lbs

Energy Star

30% of your heating cost

50% of your cooling cost

save

R

• 56" Energy Star Industrial ceiling fan

• white finish

• 3 curve blades

• 10" downrod with 60" pre-wire

& safety cable

• simple J-Hook mount

• double ball sealed bearing

• heavy cast yoke

• quiet operation

• silicon motor

U

L

R

CUS

1

year

Speed Wattage CFM CFM/W

High

Speed

Medium

Speed

Low

Speed

61 W

32 W

16 W

6,106

4846

3361

99

151

208

• wall control included

• 3 speed wall control

• 7 + 8uF/250V 100W max.

56"

48" or

36"

17.16"

15.16"

Energy Star Line features curve tipped blades.

Bonus

BANVIL KB MODEL (SC#) 2.5 3 5 8 10 15 120 240 277 6" 12" BULK KIT BOXED BRACKET DIAL PLATE BAG KNOB NUT

INDIVIDUAL

WALL

MOUNT HARDWARE MOUNTING

KB/BANVIL Speed Control Matrix Chart Amperage Capacity Input Voltage Pre-Set Voltage Lead Wires Accessories

Control Matrix Banvil2000

100B (H3535F) YES YES 86V +/- 3 YES YES NO A76041 NONE A36901 A44006 A36302

100S (H3599) YES YES 85V +/- 3 YES YES NONE NONE NONE NONE NONE A36302

100SP (H3617A) YES YES 86V +/- 3 YES YES NONE NONE NONE NONE NONE A36302

105B (H3745A) YES YES 65V +/- 3 YES YES NONE Assembled NONE NONE A44006 Not Available

105F (H3426C) YES YES 36V +/- 3 YES NO YES Assembled A28080 A36901 A44006 Not Available

105FR (H4400C) YES YES 36V +/- 3 YES NO YES Assembled A28091 B555012A A44006 Not Available

106FR (H6373) YES YES 36V +/- 3 YES NO YES Assembled A28091 B55003C A44006 Not Available

150F (3487A) YES YES 65V +/- 3 YES NO YES NONE A28079 A36903 Inlay A44010 N ot Available

105SP (H4482A) YES YES 65V +/- 3 YES YES YES NONE Assembled NONE NONE A44006 Not Available

100P (H3536D) YES YES 36V +/- 3 YES NO YES Assembled A28080 A36901 A44006 Assembled

100F (H3350C) YES YES 36V +/- 3 YES NO YES Assembled NONE A36901 B44101B Assembled

100F220V (H9051) YES YES 120V +/- 3 YES NO YES Assembled A28080 A36901 A44006 Assembled

KBMC-13BV BULK Silver Inlay Pal Nut

KBMS-13BV Pal Nut

KBWC-15 Silver Inlay

KBWC-15K Banvil Dial Silver Inlay

KBWC-15SK Silver Inlay

KBWC-15SK Banvil Silver Inlay

KBWC-110K PKG.D Dial Plate Hub w Silver

KBWC-15 Silver Inlay

KBWC-13K Banvil Dial Silver Inlay

KBMC-13K Black

KBWC-23K Silver Inlay

5-WIRE

Custom

Banvil Extended

BANVIL KB MODEL (SC#) 2.5 3 5 8 10 15 120 240 277 6" 12" BULK KIT BOXED BRACKET DIAL PLATE BAG KNOB NUT

INDIVIDUAL

WALL

MOUNT HARDWARE MOUNTING

KB/BANVIL Speed Control Matrix Chart Amperage Capacity Input Voltage Pre-Set Voltage Lead Wires Accessories

Control Matrix Banvil2000

150B (H4187A) YES YES 65V +/- 3 YES YES NO NONE NONE A36903 Inlay A44006 Not Available

KBNH-23BV (H1483A) YES YES 120V +/- 3 YES YES NO NONE NONE NONE NONE A36207

KBWC-13 (H3879D) YES YES 86V +/- 3 YES YES NO Assembled NONE A36901 A44006 Assembled

KBWC-35K (H9785B) YES YES 138V +/- 6 YES NO YES Assembled A28001 A36901 A44006 Not Available

KBMC-13BV (H4256A) YES YES 86V +/- 3 YES YES NO NONE NONE NONE NONE A36302

KBNH-13B (H3906) YES YES 65V +/- 3 YES YES NO NONE NONE NONE NONE A36207

KBMS-23BV (H4069) YES YES 172V +/- 3 YES YES NO NONE NONE NONE NONE A36302

200F-120 (H3488) YES YES 65V +/- 3 YES NO YES YES A28027A A36903 Inlay A44006 Not Available

KBWC-18 Hub w Silver

KBNH-23BV Hex Nut

KBWC-13 Silver Inlay

Dial A Temp Not Not Not

KBWC-35K Silver Inlay

KBMC-13BV Pal Nut

KBNH-13BVNSR Hex Nut

KBMS-23BV Pal Nut

200F-240 (H9007S) YES YES 120V +/- 6 YES NO YES Assembled A280278A NONE A44010

Not Available

KBWC-215K Silver Inlay

KBWC-115K Hub w Silver

Extended

200F-277 (H9781A) YES YES 138V +/-6 YES NO YES Assembled A28027A A36903 Inlay A44006 Not Available

KBWC-315K Hub w Silver

Extended

DIAL A TEMP (H9980) YES YES 65V +/- 3 NO WIRES NO YES Available Available Available A44011 Not Available

Refer to our website for installation and specification information. www.banvil2000.com

106FR

FACE PLATE

• industrial fan wall control

• 5 amp forward and reverse

• use for 5 wire fans

150F

• industrial fan wall control

• 10 amp

• also available 8 amp, 277volt

100B

• industrial fan wall control

• 2.5 amp

Controls & Accessories

100P

100F

• industrial fan wall control

• 2.5 amp

• also available 240 Volt

• industrial fan wall control

• 2.5 amp

new

106FR

105F

• industrial fan wall control

• 5 amp

• also available 277 Volt

200F

• industrial fan wall control

• 15 amp

200F/240V

105FR

• industrial fan wall control

• 5 amp forward and reverse

100S

• industrial fan wall control

• 3 amp

ROHS

•industrial fan wall control

•240 volt

•industrial fan wall control

•277 volt

200F/277V

ROHS

KNOB-SI

KNOB-WH

KNOB-150

KNOB-BK

A44108

Controls & Accessories

WC103

• church quiet control

• 3 speed capacitor

• one fan only

DSLOPEMOUNT

• 45" sloping canopy

SCAK

•slope ceiling adaptor

WC100WH

• 1.5 amp fan control

• 300W light

SM-KIT

• mounting plate with 1/2"

or 3/4" ball plus U bracket

for hanging on pipe

JB-KIT

• mounting plate

WSC 500W

• 500W variable

speed control

DZ-1

• hook

E961

E962

• extension and safety cable

• available in 18", 24" & 36"

UP-CANOPY

• comes with casting bracket

J-Hook

• hook

Mount

• easy mount

1/2 TOP COVER

FAN SHAFT

NUTS

1/2 TOP COVER

BRACKET

FAN SHAFT

HOUSING

SEE DETAIL "A"

FOUR BOLTS

HEXAGONAL NUT

BACK COVER

BOLT

CLIP

DETAIL "A"

Install the two 1/2 top covers onto the fan shaft housing with 4 bolts

(1 3/4") and two brackets, also attach two small clips.

Attach the two 1/2 bottom covers together with 6 small clips as

shown.

Place the assembled bottom cover onto the assembled top cover.

Line up the looped wire ends and attach the 10 bolts, washers

and hexagonal nuts.

3 Safety Cables are required & supplied with necessary hardware.

1.

2.

3.

4.

5.

ASSEMBLY INSTRUCTIONS

MODEL FG 36F/60F TOP COVER

FAN MOUNT APPLICATION

1 of 2

DIAMETER 40" (60")

1/2 BOTTOM

COVER

1/2 BOTTOM

COVER

WIDTH 12"

CLIP

SIX (6) PLACES

SEE

DETAIL "A"

HEXAGONAL NUT

BACK COVER

BOLT

CLIP

DETAIL "A"

HARDWARE MODEL F/36 or 60

ITEMS Qty

Top Cover 2

Bottom Cover 2

1 3/4" x 1/4-20 Bolts 4

1/4" Bolts 8

Clips 8

1" x 1/4-20 Bolts 10

1/4" Washer 1 0

1/4" - 20 Nuts 2 2

MODEL FG 36F/60F BOTTOM COVER

FAN MOUNT APPLICATION

2 of 2

HEXAGONAL NUT

BACK COVER

BOLT

CLIP

DETAIL "A"

MODEL FG36C/FG60C

HARDWARE MODEL C36 or 60

ITEMS Qty

Ceiling Cover Half 2

Clips 6

1" x 1/4 - 20 Bolts 6

1/4" Washer 6

1/4 x 20 Nuts 6

DIAMETER 40" (60")

1/2 CEILING

COVER

1/2 CEILING

COVER

WIDTH 24"

CLIP

SIX (6) PLACES

SEE

DETAIL -A

CEILING MOUNT APPLICATION

HARDWARE FOR MOUNTING

COVER TO BE SUPPLIED BY

INSTALLER.

1 of 1

www.banvil2000.com

Newfoundland:

B. Davis Agencies

Phone: 709-747-5805 • Fax: 709-747-5807

Blair Davis

Cell: 709-682-8682

b.davis@nf.sympatico.ca

New Brunswick / Nova Scotia / P.E.I:

AFS Lighting Agency

Phone: 902-483-1885 • Fax: 888-316-5855

Mark Sadofsky President

afs.agency@gmail.com

Lighting Showrooms & Electrical Wholesalers

9204-5467 Quebec Inc.

Phone: 514-816-1012 • Fax: 450-240-0264

Andrea Lafontaine

Phone: 514-816-1012

Fax: 450-240-0264

info@lumivet.com

Lumina Lighting Sales

Phone: 905-847-9550 • Fax: 905-847-3577

Peter Saiolla

Cell: 416-873-9953

saiolla@aol.com

Electrical Wholesalers

Intralec Electrical Products Ltd.

Phone: 905-670-0970 • Fax: 905-670-3098

postmaster@intralec.com

Operations: Murray Chamney

Phone: 416-881-7638

mchamney@intralec.com

Sales Manager: Ted Doherty Ext. 306

Cell: 416-881-7646

tdoherty@intralec.com

Commercial Products

dealing with Towns, Cities, and Municipalities

QSM

Peter Quigley

Office: 866-289-5348 • Fax: 866-658-0639

qssi@qsm.ca

D.I.Y & Hardware Market

Bond Industries

Phone: 905-854-2214 • Fax: 905-854-0615

Toll Free Phone: 1-888-610-0999

President: Harvey Shoemaker

harveylshoemaker@aol.com

Hi-Tech Sales (1989) Limited

Phone: 204-694-0000 • Fax: 204-694-0433

President: Garry Pestaluky

204-694-0000 Ext: 4

Cell: 204-794-8843

GPestaluky@Hi-TechSales.ca

ATLANTIC

ONTARIO

MANITOBA

QUEBEC

Hi-Tech Sales (1989) Limited

Phone: 306-771-2500 • Fax: 306-771-4789

Jason Rathgeber

Cell: 306-527-1120

hitech.regina@sasktel.net

Prolite Agencies

John Stam

Phone: 604-250-8425 • Fax: 604-852-8171

john@proliteagencies.ca

Alliance Marketing

Phone: 604-205-5284

B.C. Toll Free Only: 1-888-992-2992

President: Sandy Macpherson

Cell: 604-816-3915

smacpherson@alliancemarketing.ca

Sales: Peggy Norman

pnorman@alliancemarketing.ca

Patty Pinksen

ppinksen@alliancemarketing.ca Outside Sales

SASKATCHEWAN

ALBERTA

BRITISH COLUMBIA

HEAD OFFICE

Sales Manager: Curtis Fieber

204-694-0000 Ext: 2

Cell: 204-299-6546

CFieber@Hi-TechSales.ca

Prolite Agencies

John Stam

Phone: 604-250-8425 • Fax: 604-852-8171

john@proliteagencies.ca

775 Main St E., Milton ON L9T 3Z3

Ph: 1-888-8BANVIL (22-6845) • 905-878-1080

Fx: 1-888-4BANVIL (22-6845) • 905-878-0272

President: Everret Wills Ext. 222

ewills@banvil2000.com

V.P. of Operations: Larry Agla Ext. 223

lagla@banvil2000.com

Order Desk: Lea Hiltz Ext 231

lhiltz@banvil2000.com

Order Desk: Cindy Hayes Ext 229

csr2@banvil2000.com

Bilingual Order Desk: Hugo Lavallee Ext. 221

csr1@banvil2000.com

Order Desk: Kristy McAlister Ext. 225

kmcalister@banvil2000.com

agents

BANVIL NATIONAL CUSTOMER SERVICE

Toll Free:1-888-8BA-NVIL (1-888-822-6845)

775 Main St. E., Milton ON L9T 3Z3

Ph: 905-878-1080 Fax: 905-878-0272

E-mail: info@banvil2000.com

www.banvil2000.com

Industrial Fan Catalogue ENGLISH 136815 Catalog

54863-Catalog 54863-Catalog 54863-Catalog 811706 Batch10 unilog cesco-content

72843-Catalog 72843-Catalog 72843-Catalog 811706 Batch10 unilog cesco-content

94664-Catalog 94664-Catalog 94664-Catalog 811706 Batch10 unilog cesco-content

53810-Catalog 53810-Catalog 53810-Catalog 811706 Batch10 unilog cesco-content

Navigation menu

Versions of this User Manual:

Views

Navigation