Rittal TS8 Freestanding Industrial Enclosures And Accessories 149199 Catalog

2016-10-06

: Pdf 149199-Catalog 149199-Catalog B5 unilog

Open the PDF directly: View PDF PDF.
Page Count: 16

Rittal –The System.
Faster – Better – Worldwide.
Rittal – TS8 Specication Guide
TS8 Freestanding Industrial Enclosures and Accessories
Why Choose Rittal?
The Rittal TS8 is the premier modular enclosure available in the world today.
Engineered with the challenges of real-world applications in mind, the TS8
can protect critical equipment in even the most demanding environments.
The strength and
flexibility of the TS8
come from its robust
16-fold, tubular frame
that features a 25
mm hole pattern that
allows components
and accessories to be
mounted horizontally
or vertically and can
support loads of up to
3,200 lb. Combined
with the included, zinc-
plated mounting panel,
the TS8 provides 15%
more interior mounting
space than unibody,
NEMA-style enclosures.
Due to its modular design, the TS8 is easily adaptable to your unique
requirements. Offered in powder-coated carbon and 304 or 316L stainless
steel, the TS8 delivers the protection and durability you need while a wide
variety of standard accessories ensures your ability to craft your ideal
enclosure solution.
The Rittal Corporation is the U.S. subsidiary of Rittal GmbH & Co. KG and
manufactures the world’s leading industrial and IT enclosures, racks and
accessories, including climate control and power management systems
for industrial, data center, outdoor and hybrid applications. For more
information about Rittal and its products, please visit www.rittal-corp.com
or call 1-800-477-4000.
Patented 16-fold frame prole increases
strength and maximizes exibility
Engineered to handle large load capacities of up to 3,200 lb
Frame-based, modular design—exterior surfaces can be easily
removed for modifications saving time and money
Depth-adjustable, zinc-plated mounting panel
Full-sized for increased mounting surface area—up to
30% more than that typically found in unibody enclosures
Easily slides in and out for greater usability
Instant grounding without scraping paint saves time and money
Enables more components to fit inside a smaller enclosure—
reducing cabinet footprints and preserving valuable floor space
Doors with multi-point, captive hinges
Can hold up to 200 lb and be removed in as little as
30 seconds—98% faster than piano-hinged doors
Seamless foamed-in-place gasket
Provides tight and secure seal against contaminates and
ensures protection ratings
Mid-level EMC shielding out of the box
Standard side and rear wall brackets are ground-ready—
no need for grounding straps
Wide variety of accessories
Readily configurable to meet your unique needs
2TS 8 Specification Guide
3
TS8 Specification Guide
TS8 Freestanding Enclosures
UL Type 12, IP 55, Single and Double Door — See Pages 6 & 7
Conguration:
Enclosure frame with door(s),
mounting panel, gland plates,
rear wall and roof plate
Finish:
Enclosure frame: Dipcoat-primed
Door, roof and rear wall:
Dipcoat-primed, powder-coated in textured RAL
7035 (light gray) on the outside
Mounting panel and gland plates:
Zinc-plated
Material:
Sheet steel
Enclosure frame, roof, rear wall
and gland plates: 16 ga (1.5 mm)
Door(s): 14 ga (2.0 mm)
Mounting panel: 11 ga (3.0 mm)
Protection Ratings:
cULus Type 12
(IP 55 to EN 60 529)
UL file: E76083
Marshalling — See Page 7
Conguration:
Enclosure frame with door (without tubular door
frame), rear wall and roof plate
Finish:
Enclosure frame: Dipcoat-primed
Door, roof and rear wall:
Dipcoat-primed, powder-coated in textured RAL
7035 (light gray) on the outside
Material:
Sheet steel
Enclosure frame, roof and rear wall:
16 ga (1.5 mm)
Door: 14 ga (2.0 mm)
Conguration:
Enclosure frame, front frame (right hinged,
opening angle 130°, held with mechanical snap
fasteners on left), rear door (right hinged, may
be changed to the opposite side), roof, 19” rail
sections and gland plates
Finish:
Enclosure frame: Dipcoat-primed
front frame, rear door and roof:
Powder-coated in RAL 7035
(light gray)
19” rail sections: Conductive,
corrosion-resistant coating
Gland plates: Zinc-plated
Material:
Sheet steel
Enclosure frame: 16 ga (1.5 mm)
Rear door:
14 ga (2.0 mm)
Roof and gland plates:
16 ga (1.5 mm)
19” rail sections: Aluminum
Front frame: Extruded aluminum
sections with die-cast corner pieces
Protection Ratings:
cULus Type 1
(With rack mounted equipment or solid door)
UL file: E76083
Electronic Enclosures, Single Door — See Page 8
Modular Front Design— See Page 8
Conguration:
Enclosure frame, roof, rear panel,
gland plates
Finish:
Enclosure frame:
Dipcoat-primed
Door and rear panel:
Dipcoat-primed, powder-coated
in textured RAL 7035 on the outside
Gland plates: Zinc-plated
Material:
Sheet steel
Enclosure frame, roof, rear panel,
and gland plates: 16 ga (1.5 mm)
Protection Ratings:
NEMA 12
(with partial doors installed)
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
4TS8 Specification Guide
UL Type 3R , Single Door— See Page 8
Conguration:
Enclosure frame with door (without tubular
door frame), rear wall and roof plate
Finish:
Enclosure frame: Dipcoat-primed
and powder coated RAL 7035 (light gray)
Door, trim panel, roof and rear wall:
Dipcoat-primed powder-coated on the outside in
textured RAL 7035 (light gray)
Mounting panel and gland plates:
Zinc-plated
Material:
Sheet steel
Enclosure frame and doors:
14 ga (2 mm)
Rear walls: 16 ga (1.5 mm)
Mounting Panel: 11 ga (3 mm)
zinc-plated
Protection Ratings:
cULus Type 3R, 12 - solid door
cULus Type 3R - vented door
UL file: E170282
UL Type 4, IP55, Single Door — See Page 8
Conguration:
Enclosure frame with door, roof/ base plate,
rear wall, sidewalls, mounting panel
Finish:
Enclosure frame: Dipcoat-primed
and powder coated RAL 7035
(light gray)
Door, roof, base, rear wall,
sidewalls: Dipcoat-primed and powder-coated,
textured RAL 7035 (light gray)
Mounting panel: Zinc-plated
Material:
Sheet steel
Enclosure frame, roof, base,
rear wall, sidewalls: 1.5 mm (16 ga)
Door: 2.0 mm (14 ga)
Mounting panel: 3.0 mm (11 ga)
Protection Ratings:
cULus Type 4
(IP 66 to EN 60 529)
UL file: E76083
TS8 Freestanding Enclosures
Conguration:
Enclosure frame with doors,
12 inch bolt-on leg kit, mounting
panel, roof plate, rear wall,
sidewalls, solid floor panel,
comfort handle with push
button insert
Finish:
Enclosure frame:
Dipcoat-primed
Door, roof and rear wall:
Powder-coated in RAL 7035
(light gray) on the outside
Mounting panel: Zinc-plated
Material:
Sheet steel
Enclosure frame: 16 ga (1.5 mm)
Roof, rear wall, solid floor panel,
door: 14 ga (2.0 mm)
Legs, mounting panel: 11 ga (3.0 mm)
Protection Ratings:
cULus Type 12
UL file: E76083
UL Type 12, Floormount, Double Door— See Page 9
Conguration:
Enclosure frame, door (left hinged), trim panel
(right hinged, with a swing lever at the top
and bottom, with cutout for disconnect handle),
roof, rear wall, mounting panel, three-piece
gland plates. Includes handle interlocking kit
8611.310.
Finish:
Enclosure frame: Dipcoat-primed
Door, trim panel, roof, and rear
wall: Dipcoat-primed, powder-coated on the
outside in textured RAL 7035 (light gray)
Mounting panel and gland plates: Zinc-plated
Material:
Sheet steel
Enclosure frame, roof, rear wall, and
gland plates: 16 ga (1.5 mm)
Door and trim panel: 14 ga (2.0 mm)
Mounting panel: 11 ga (3.0 mm)
Protection Ratings:
cULus Type 12
(IP 55 to EN 60 529/10.91)
(With disconnect handle installed)
UL file: E76083
B2
UL Type 12, IP 55, Single and Double Door Disconnect— See Pages 9 & 10
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
5
TS8 Specification Guide
Stainless Steel UL Type 12, IP 55 Single and Double Door— Type 304— See Page 10
Conguration:
Enclosure frame with door(s),
mounting panel, gland plates,
rear panel and roof,
2 support strips mounted in the
enclosure depth (only with a
depth of 24” [600 mm]).
Finish:
Enclosure frame and gland plates: Uncoated
Door, roof and rear panel: Brushed on the
outside, grain size 400
Mounting panel: Zinc-plated
Material:
Type 304 stainless steel
Enclosure frame, roof, rear panel
and gland plates: 16 ga (1.5 mm)
Door(s): 14 ga (2.0 mm)
Mounting panel: Sheet steel, 11 ga (3.0 mm)
Protection Ratings:
cULus Type 12
(IP 55 to EN 60 529)
UL file: E76083
TS8 Freestanding Enclosures
Stainless Steel UL Type 12, IP 55 Single and Double Door— Type 316L— See Page 10
Conguration:
Enclosure frame with door(s),
mounting panel, gland plates,
rear panel and roof,
2 support strips mounted in the
enclosure depth (only with a
depth of 24” [600 mm]).
Finish:
Enclosure frame and gland plates: Uncoated
Door, roof and rear panel: Brushed on
the outside, grain size 400
Mounting panel: Zinc-plated
Material:
Type 316L stainless steel
Enclosure frame, roof, rear panel
and gland plates: 16 ga (1.5 mm)
Door(s): 14 ga (2.0 mm)
Mounting panel: Sheet steel, 11 ga (3.0 mm)
Protection Ratings:
cULus Type 12
(IP 55 to EN 60 529)
UL file: E76083
Conguration:
Enclosure frame with door, roof/
base plate, rear wall, mounting panel.
Finish:
Enclosure frame: Type 304
stainless steel, door, roof, base,
rear wall: Brushed
Mounting panel: Zinc-plated
Material:
Type 304 stainless steel
Enclosure frame, roof, base,
rear wall: 16 ga (1.5 mm)
Door: 14 ga (2.0 mm)
Mounting panel: 11 ga (3.0 mm)
Protection Ratings:
cULus Type 4X
(IP 66 to EN 60 529)
UL file: E76083
Stainless Steel UL Type 4X, IP 66 Single Door— Type 304— See Page 11
Conguration:
Enclosure frame, removable center mullion, two
doors (both left hinged), trim panel (right hinged
with swing lever at the top and bottom, with
cut-out for disconnect handle), 12 inch bolt-on
leg kit, mounting panel, roof, rear wall, sidewalls,
solid floor panel, comfort handle with pad lock
hasp and push button insert. Includes handle
interlocking kit (8611.310) for the main door as
well as the adjacent door locking kit (4911.000)
and interlocking rods for the adjacent door.
Finish:
Enclosure frame:
Dipcoat-primered
Door, roof, rear wall and floor panel: Dipcoat-
primered and powder coated in RAL 7035 (light
gray) on the outside
Mounting panel:
Zinc-plated
Material:
Sheet steel
Enclosure frame:
16 ga (1.5 mm)
Roof, door, rear wall, solid floor panel:
14 ga (2.0 mm)
Legs, mounting panel:
11 ga (3.0 mm)
Protection Ratings:
cULus Type 12
UL file: E170282
UL Type 12 Floormount Disconnect, Double Door— See Page 10
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
6 Note: inch measurements are rounded TS8 Specification Guide
Part numbers highlighted in blue are standard stock items. Other items are subject to standard lead times.
TS8 Freestanding Enclosures
UL Type 12, IP 55, Single Door
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8615.500 47x24x20 1200x600x500 8115.235 43x20 1096x499 8601.600 8601.050 8602.600 8602.050
8815.500 47x32x20 1200x800x500 8115.235 43x28 1096x699 8601.800 8601.050 8602.800 8602.050
8645.500 55x24x20 1400x600x500 8145.235 51x20 1296x499 8601.600 8601.050 8602.600 8602.050
8845.500 55x32x20 1400x800x500 8145.235 51x28 1296x699 8601.800 8601.050 8602.800 8602.050
8646.500 55x24x24 1400x600x600 8146.235 51x20 1296x499 8601.600 8601.060 8602.600 8602.060
8846.500 55x32x24 1400x800x600 8146.235 51x28 1296x699 8601.800 8601.060 8602.800 8602.060
8648.500 55x24x32 1400x600x800 8148.235 51x20 1296x499 8601.600 8601.080 8602.600 8602.080
8848.500 55x32x32 1400x800x800 8148.235 51x28 1296x699 8601.800 8601.080 8602.800 8602.080
8665.500 63x24x20 1600x600x500 8165.235 59x20 1496x499 8601.600 8601.050 8602.600 8602.050
8865.500 63x32x20 1600x800x500 8165.235 59x28 1496x699 8601.800 8601.050 8602.800 8602.050
8666.500 63x24x24 1600x600x600 8166.235 59x20 1496x499 8601.600 8601.060 8602.600 8602.060
8866.500 63x32x24 1600x800x600 8166.235 59x28 1496x699 8601.800 8601.060 8602.800 8602.060
8668.500 63x24x32 1600x600x800 8168.235 59x20 1496x499 8601.600 8601.080 8602.600 8602.080
8868.500 63x32x32 1600x800x800 8168.235 59x28 1496x699 8601.800 8601.080 8602.800 8602.080
8684.500 71x24x16 1800x600x400 8184.235 67x20 1696x499 8601.600 8601.040 8602.600 8602.040
8884.500 71x32x16 1800x800x400 8184.235 67x28 1696x699 8601.800 8601.040 8602.800 8602.040
8084.500 71x39x16 1800x1000x400 8184.235 67x35 1696x899 8601.000 8601.040 8602.000 8602.040
8685.500 71x24x20 1800x600x500 8185.235 67x20 1696x499 8601.600 8601.050 8602.600 8602.050
8885.500 71x32x20 1800x800x500 8185.235 67x28 1696x699 8601.800 8601.050 8602.800 8602.050
8085.500 71x39x20 1800x1000x500 8185.235 67x35 1696x899 8601.000 8601.050 8602.000 8602.050
8686.500 71x24x24 1800x600x600 8186.235 67x20 1696x499 8601.600 8601.060 8602.600 8602.060
8886.500 71x32x24 1800x800x600 8186.235 67x28 1696x699 8601.800 8601.060 8602.800 8602.060
8086.500 71x40x24 1800x1000x600 8186.235 67x35 1696x899 8601.000 8601.060 8602.000 8602.060
8688.500 71x24x32 1800x600x800 8188.235 67x20 1696x499 8601.600 8601.080 8602.600 8602.080
8888.500 71x32x32 1800x800x800 8188.235 67x28 1696x699 8601.800 8601.080 8602.800 8602.080
8088.500 71x39x32 1800x1000x800 8188.235 67x35 1696x899 8601.000 8601.080 8602.000 8602.080
8604.500 79x24x16 2000x600x400 8104.235 75x20 1896x499 8601.600 8601.040 8602.600 8602.040
8804.500 79x32x16 2000x800x400 8104.235 75x28 1896x699 8601.800 8601.040 8602.800 8602.040
8405.500 79x16x20 2000x400x500 8105.235 75x12 1896x299 8601.400 8601.050 8602.400 8602.050
8605.500 79x24x20 2000x600x500 8105.235 75x20 1896x499 8601.600 8601.050 8602.600 8602.050
8805.500 79x32x20 2000x800x500 8105.235 75x28 1896x699 8601.800 8601.050 8602.800 8602.050
8406.500 79x16x24 2000x400x600 8106.235 75x12 1896x299 8601.400 8601.060 8602.400 8602.060
8606.500 79x24x24 2000x600x600 8106.235 75x20 1896x499 8601.600 8601.060 8602.600 8602.060
8806.500 79x32x24 2000x800x600 8106.235 75x28 1896x699 8601.800 8601.060 8602.800 8602.060
8006.530 79x39x24 2000x1000x600 8106.235 75x35 1896x899 8601.000 8601.060 8602.000 8602.060
8608.500 79x24x32 2000x600x800 8108.235 75x20 1896x499 8601.600 8601.080 8602.600 8602.080
8808.500 79x32x32 2000x800x800 8108.235 75x28 1896x699 8601.800 8601.080 8602.800 8602.080
8008.530 79x39x32 2000x1000x800 8108.235 75x35 1896x899 8601.000 8601.080 8602.000 8602.080
8625.500 87x24x20 2200x600x500 8125.235 83x20 2096x499 8601.600 8601.050 8602.600 8602.050
8825.500 87x32x20 2200x800x500 8125.235 83x28 2096x699 8601.800 8601.050 8602.800 8602.050
8025.500 87x39x20 2200x1000x500 8125.235 83x35 2096x899 8601.000 8601.050 8602.000 8602.050
8426.500 87x16x24 2200x400x600 8126.235 83x12 2096x299 8601.400 8601.060 8602.400 8602.060
8626.500 87x24x24 2200x600x600 8126.235 83x20 2096x499 8601.600 8601.060 8602.600 8602.060
8826.500 87x32x24 2200x800x600 8126.235 83x28 2096x699 8601.800 8601.060 8602.800 8602.060
8026.500 87x39x24 2200x1000x600 8126.235 83x35 2096x899 8601.000 8601.060 8602.000 8602.060
8628.500 87x24x32 2200x600x800 8128.235 83x20 2096x499 8601.600 8601.080 8602.600 8602.080
8828.500 87x32x32 2200x800x800 8128.235 83x28 2096x699 8601.800 8601.080 8602.800 8602.080
8028.500 87x39x32 2200x1000x800 8128.235 83x35 2096x899 8601.000 8601.080 8602.000 8602.080
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
7
TS8 Specification Guide Note: inch measurements are rounded
Part numbers highlighted in blue are standard stock items. Other items are subject to standard lead times.
TS8 Freestanding Enclosures
UL Type 12, IP 55, Double Door
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8215.500 47x47x20 1200x1200x500 8115.235 43x43 1096x1099 8601.200 8601.050 8602.200 8602.050
8245.500 55x47x20 1400x1200x500 8145.235 51x43 1296x1099 8601.200 8601.050 8602.200 8602.050
8246.500 55x47x24 1400x1200x600 8146.235 51x43 1296x1099 8601.200 8601.060 8602.200 8602.060
8248.500 55x47x32 1400x1200x800 8148.235 51x43 1296x1099 8601.200 8601.080 8602.200 8602.080
8265.500 63x47x20 1600x1200x500 8165.235 59x43 1496x1099 8601.200 8601.050 8602.200 8602.050
8266.500 63x47x24 1600x1200x600 8166.235 59x43 1496x1099 8601.200 8601.060 8602.200 8602.060
8268.500 63x47x32 1600x1200x800 8168.235 59x43 1496x1099 8601.200 8601.080 8602.200 8602.080
8080.500 71x39x16 1800x1000x400 8184.235 67x35 1696x899 8601.000 8601.040 8602.000 8602.040
8284.500 71x47x16 1800x1200x400 8184.235 67x43 1696x1099 8601.200 8601.040 8602.200 8602.040
8901.210 71x63x16 1800x1600x400 8184.235 67x59 1696x1499 8601.920 8601.040 8602.920 8602.040
8901.250 71x71x16 1800x1800x400 8184.235 67x67 1696x1699 8901.920 8601.040 8901.930 8602.040
8880.500 71x32x20 1800x800x500 8185.235 67x28 1696x699 8601.800 8601.050 8602.800 8602.050
8285.500 71x47x20 1800x1200x500 8185.235 67x43 1696x1099 8601.200 8601.050 8602.200 8602.050
8901.220 71x63x20 1800x1600x500 8185.235 67x59 1696x1499 8601.920 8601.050 8602.920 8602.050
8901.260 71x71x20 1800x1800x500 8185.235 67x67 1696x1699 8901.920 8601.050 8901.930 8602.050
8881.500 71x32x24 1800x800x600 8186.235 67x28 1696x699 8601.800 8601.060 8602.800 8602.060
8286.500 71x47x24 1800x1200x600 8186.235 67x43 1696x1099 8601.200 8601.060 8602.200 8602.060
8901.230 71x63x24 1800x1600x600 8186.235 67x59 1696x1499 8601.920 8601.060 8602.920 8602.060
8901.270 71x71x24 1800x1800x600 8186.235 67x67 1696x1699 8901.920 8601.060 8901.930 8602.060
8288.500 71x47x32 1800x1200x800 8188.235 67x43 1696x1099 8601.200 8601.080 8602.200 8602.080
8901.240 71x63x32 1800x1600x800 8188.235 67x59 1696x1499 8601.920 8601.080 8602.920 8602.080
8901.280 71x71x32 1800x1800x800 8188.235 67x67 1696x1699 8901.920 8601.080 8901.930 8602.080
8004.500 79x39x16 2000x1000x400 8104.235 75x35 1896x899 8601.000 8601.040 8602.000 8602.040
8204.500 79x47x16 2000x1200x400 8104.235 75x43 1896x1099 8601.200 8601.040 8602.200 8602.040
8005.500 79x39x20 2000x1000x500 8105.235 75x35 1896x899 8601.000 8601.050 8602.000 8602.050
8205.500 79x47x20 2000x1200x500 8105.235 75x43 1896x1099 8601.200 8601.050 8602.200 8602.050
8901.290 79x63x20 2000x1600x500 8105.235 75x59 1896x1499 8601.920 8601.050 8602.920 8602.050
8901.420 79x71x20 2000x1800x500 8105.235 75x67 1896x1699 8901.920 8601.050 8901.930 8602.050
8006.500 79x39x24 2000x1000x600 8106.235 75x35 1896x899 8601.000 8601.060 8602.000 8602.060
8206.500 79x47x24 2000x1200x600 8106.235 75x43 1896x1099 8601.200 8601.060 8602.200 8602.060
8901.400 79x63x24 2000x1600x600 8106.235 75x59 1896x1499 8601.920 8601.060 8602.920 8602.060
8901.430 79x71x24 2000x1800x600 8106.235 75x67 1896x1699 8901.920 8601.060 8901.930 8602.060
8008.500 79x39x32 2000x1000x800 8108.235 75x35 1896x899 8601.000 8601.080 8602.000 8602.080
8208.500 79x47x32 2000x1200x800 8108.235 75x43 1896x1099 8601.200 8601.080 8602.200 8602.080
8901.410 79x63x32 2000x1600x800 8108.235 75x59 1896x1499 8601.920 8601.080 8602.920 8602.080
8901.440 79x71x32 2000x1800x800 8108.235 75x67 1896x1699 8901.920 8601.080 8901.930 8602.080
8225.500 87x47x20 2200x1200x500 8125.235 83x43 2096x1099 8601.200 8601.050 8602.200 8602.050
8226.500 87x47x24 2200x1200x600 8126.235 83x43 2096x1099 8601.200 8601.060 8602.200 8602.060
8228.500 87x47x32 2200x1200x800 8128.235 83x43 2096x1099 8901.920 8601.080 8901.930 8602.080
Marshalling Enclosures
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8485.510 71x16x20 1800x400x500 8185.235 – – 8601.400 8601.050 8602.400 8602.050
8486.510 71x16x24 1800x400x600 8186.235 – – 8601.400 8601.060 8602.400 8602.060
8405.510 79x16x20 2000x400x500 8105.235 – – 8601.400 8601.050 8602.400 8602.050
8406.510 79x16x24 2000x400x600 8106.235 – – 8601.400 8601.060 8602.400 8602.060
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
8 Note: inch measurements are rounded TS8 Specification Guide
Part numbers highlighted in blue are standard stock items. Other items are subject to standard lead times.
TS8 Freestanding Enclosures
Electronic Enclosures, Single Door
Part
Number UHxWxD
inches
HxWxD
mm
Sidewalls
(Pair)
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8410.510 33 63x24x24 1600x600x600 8166.235 8601.600 8601.060 8602.600 8602.060
8418.510 33 63x24x32 1600x600x800 8168.235 8601.600 8601.080 8602.600 8602.080
8430.510 42 79x24x24 2000x600x600 8106.235 8601.600 8601.060 8602.600 8602.060
8438.510 42 79x24x32 2000x600x800 8108.235 8601.600 8601.080 8602.600 8602.080
Modular Front Design
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8606.512 79x24x24 2000x600x600 8106.512 – – 8601.600 8601.060 8602.600 8602.060
8806.512 79x32x24 2000x800x600 8106.512 – – 8601.800 8601.060 8602.800 8602.060
See page 15 for Modular Front Design accessories
UL Type 4, IP65, Single Door
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8686.540 71x24x24 1800x600x600 Included 67x20 1696x499 8601.600 8601.060 8602.600 8602.060
8886.540 71x32x24 1800x800x600 Included 67x28 1696x699 8601.800 8601.060 8602.800 8602.060
8606.540 79x24x24 2000x600x600 Included 75x20 1896x499 8601.600 8601.060 8602.600 8602.060
8806.540 79x32x24 2000x800x600 Included 75x28 1896x699 8601.800 8601.060 8602.800 8602.060
UL Type 3R, Single Door
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8606.547 79x24x24 2000x600x600 8106.235 75x20 1896x499 8601.600 8601.060 8602.600 8602.060
8608.547 79x24x32 2000x600x800 8108.235 75x20 1896x499 8601.600 8601.080 8602.600 8602.080
8806.547 79x32x24 2000x800x600 8106.235 75x28 1896x699 8601.800 8601.060 8602.800 8602.060
8808.547 79x32x32 2000x800x800 8108.235 75x28 1896x699 8601.800 8601.080 8602.800 8602.080
8006.547 79x39x24 2000x1000x600 8106.235 75x35 1896x899 8601.000 8601.060 8602.000 8602.060
8008.547 79x39x32 2000x1000x800 8108.235 75x35 1896x899 8601.000 8601.080 8602.000 8602.080
8606.548 79x24x24 2000x600x600 8106.235 75x20 1896x499 8601.600 8601.060 8602.600 8602.060
8608.548 79x24x32 2000x600x800 8108.235 75x20 1896x499 8601.600 8601.080 8602.600 8602.080
8806.548 79x32x24 2000x800x600 8106.235 75x28 1896x699 8601.800 8601.060 8602.800 8602.060
8808.548 79x32x32 2000x800x800 8108.235 75x28 1896x699 8601.800 8601.080 8602.800 8602.080
8006.548 79x39x24 2000x1000x600 8106.235 75x20 1896x499 8601.000 8601.060 8602.000 8602.060
8008.548 79x39x32 2000x1000x800 8108.235 75x35 1896x899 8601.000 8601.080 8602.000 8602.080
8626.547 87x24x24 2200x600x600 8126.235 83x20 2096x499 8601.600 8601.060 8602.600 8602.060
8628.547 87x24x32 2200x600x800 8128.235 83x20 2096x499 8601.600 8601.080 8602.600 8602.080
8826.547 87x32x24 2200x800x600 8126.235 83x28 2096x699 8601.800 8601.060 8602.800 8602.060
8828.547 87x32x32 2200x800x800 8128.235 83x28 2096x699 8601.800 8601.080 8602.800 8602.080
8026.547 87x39x24 2200x1000x600 8126.235 83x35 2096x899 8601.000 8601.060 8602.000 8602.060
8028.547 87x39x32 2200x1000x800 8128.235 83x35 2096x899 8601.000 8601.080 8602.000 8602.080
8626.548 87x24x24 2200x600x600 8126.235 83x20 2096x499 8601.600 8601.060 8602.600 8602.060
8628.548 87x24x32 2200x600x800 8128.235 83x20 2096x499 8601.600 8601.080 8602.600 8602.080
8826.548 87x24x24 2200x600x600 8126.235 83x20 2096x499 8601.600 8601.060 8602.600 8602.060
8828.548 87x32x32 2200x800x800 8128.235 83x28 2096x699 8601.800 8601.080 8602.800 8602.080
8026.548 87x39x24 2200x1000x600 8126.235 83x35 2096x899 8601.000 8601.060 8602.000 8602.060
8028.548 87x39x32 2200x1000x800 8128.235 83x35 2096x899 8601.000 8601.080 8602.000 8602.080
.547 part numbers are vented enclosures; .548 part numbers are non-vented enclosures
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
9
TS8 Specification Guide Note: inch measurements are rounded
Part numbers highlighted in blue are standard stock items. Other items are subject to standard lead times.
TS8 Freestanding Enclosures
UL Type 12, Floormount, Double Door
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
TSFM634712NC 63x47x12 1600x1200x300 Included 59x43 1496x1099 Not Required Not Required Not Required Not Required
TSFM636312NC 63x63x12 1600x1600x300 Included 59x59 1496x1499 Not Required Not Required Not Required Not Required
TSFM716312NC 71x63x12 1800x1600x300 Included 67x59 1696x1499 Not Required Not Required Not Required Not Required
TSFM717112NC 71x71x12 1800x1800x300 Included 67x67 1696x1699 Not Required Not Required Not Required Not Required
TSFM634716NC 63x47x16 1600x1200x400 Included 59x43 1496x1099 Not Required Not Required Not Required Not Required
TSFM636316NC 63x63x16 1600x1600x400 Included 59x59 1496x1499 Not Required Not Required Not Required Not Required
TSFM716316NC 71x63x16 1800x1600x400 Included 67x59 1696x1499 Not Required Not Required Not Required Not Required
TSFM717116NC 71x71x16 1800x1800x400 Included 67x67 1696x1699 Not Required Not Required Not Required Not Required
TSFM634720NC 63x47x20 1600x1200x500 Included 59x43 1496x1099 Not Required Not Required Not Required Not Required
TSFM716320NC 71x63x20 1800x1600x500 Included 67x59 1696x1499 Not Required Not Required Not Required Not Required
TSFM717120NC 71x71x20 1800x1800x500 Included 67x67 1696x1699 Not Required Not Required Not Required Not Required
TSFM634724NC 63x47x24 1600x1200x600 Included 59x43 1496x1099 Not Required Not Required Not Required Not Required
TSFM636324NC 63x63x24 1600x1600x600 Included 59x59 1496x1499 Not Required Not Required Not Required Not Required
TSFM716324NC 71x63x24 1800x1600x600 Included 67x59 1696x1499 Not Required Not Required Not Required Not Required
TSFM717124NC 71x71x24 1800x1800x600 Included 67x67 1696x1699 Not Required Not Required Not Required Not Required
UL Type 12, IP 55, Disconnect, Single Door
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8945.580 55x32x20 1400x800x500 8145.235 51x28 1296x699 8601.800 8601.050 8602.800 8602.050
8945.500 55x39x20 1400x1000x500 8145.235 51x35 1296x899 8601.000 8601.050 8602.000 8602.050
8965.500 63x32x20 1600x800x500 8165.235 59x28 1496x699 8601.800 8601.050 8602.800 8602.050
8966.500 63x32x24 1600x800x600 8166.235 59x28 1496x699 8601.800 8601.060 8602.800 8602.060
8984.500 71x32x16 1800x800x400 8184.235 67x28 1696x699 8601.800 8601.040 8602.800 8602.040
8985.500 71x32x20 1800x800x500 8185.235 67x28 1696x699 8601.800 8601.050 8602.800 8602.050
8980.500 71x39x20 1800x1000x500 8185.235 67x35 1696x899 8601.000 8601.050 8602.000 8602.050
8905.500 79x32x20 2000x800x500 8105.235 75x28 1896x699 8601.800 8601.050 8602.800 8602.050
8995.500 79x39x20 2000x1000x500 8105.235 75x35 1896x899 8601.000 8601.050 8602.000 8602.050
8906.500 79x31x24 2000x800x600 8106.235 75x28 1896x699 8601.800 8601.060 8602.800 8602.060
8996.500 79x39x24 2000x1000x600 8106.235 75x35 1896x899 8601.000 8601.060 8602.000 8602.060
8908.500 79x31x31 2000x800x800 8108.235 75x28 1896x699 8601.800 8601.080 8602.800 8602.080
8925.500 87x31x20 2200x800x500 8125.235 83x28 2096x699 8601.800 8601.050 8602.800 8602.050
8958.500 87x39x20 2200x1000x500 8125.235 83x35 2096x899 8601.000 8601.050 8602.000 8602.050
8926.500 87x31x24 2200x800x600 8126.235 83x28 2096x699 8601.800 8601.060 8602.800 8602.060
UL Type 12, IP 55, Disconnect, Double Door
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8901.600 71x63x16 1800x1600x400 8184.235 67x59 1696x1499 8601.920 8601.040 8602.920 8602.040
8901.620 71x71x16 1800x1800x400 8184.235 67x67 1696x1699 8901.920 8601.040 8901.930 8602.040
8901.610 71x63x20 1800x1600x500 8185.235 67x59 1696x1499 8601.920 8601.050 8602.920 8602.050
8901.630 71x71x20 1800x1800x500 8185.235 67x59 1696x1699 8901.920 8601.050 8901.930 8602.050
8901.650 79x63x20 2000x1600x500 8105.235 75x59 1896x1499 8601.920 8601.050 8602.920 8602.050
8901.680 79x71x20 2000x1800x500 8105.235 75x59 1896x1699 8901.920 8601.050 8901.930 8602.050
8901.640 71x71x24 1800x1800x600 8186.235 67x67 1696x1699 8901.920 8601.060 8901.930 8602.060
8901.660 79x63x24 2000x1600x600 8106.235 75x67 1896x1499 8601.920 8601.060 8602.920 8602.060
8901.690 79x71x24 2000x1800x600 8106.235 75x67 1896x1699 8901.920 8601.060 8901.930 8602.060
8901.670 79x63x31 2000x1600x800 8108.235 75x59 1896x1499 8601.920 8601.080 8602.920 8602.080
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
10 Note: inch measurements are rounded TS8 Specification Guide
Part numbers highlighted in blue are standard stock items. Other items are subject to standard lead times.
TS8 Freestanding Enclosures
UL Type 12 Floormount Disconnect, Double Door
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
TSFM634716XC 63x47x16 1600x1200x400 Included 59x43 1496x109 Not Required Not Required Not Required Not Required
TSFM636316XC 63x63x16 1600x1600x400 Included 59x59 1496x1499 Not Required Not Required Not Required Not Required
TSFM716316XC 71x63x16 1800x1600x400 Included 67x59 1696x1499 Not Required Not Required Not Required Not Required
TSFM717116XC 71x71x16 1800x1800x400 Included 67x67 1696x1699 Not Required Not Required Not Required Not Required
TSFM634720XC 63x47x20 1600x1200x500 Included 59x43 1496x1099 Not Required Not Required Not Required Not Required
TSFM636320XC 63x63x20 1600x1600x500 Included 59x59 1496x1499 Not Required Not Required Not Required Not Required
TSFM716320XC 71x63x20 1800x1600x500 Included 67x59 1696x1499 Not Required Not Required Not Required Not Required
TSFM717120XC 71x71x20 1800x1800x500 Included 67x67 1696x1699 Not Required Not Required Not Required Not Required
TSFM634724XC 63x47x24 1600x1200x600 Included 59x43 1496x1099 Not Required Not Required Not Required Not Required
TSFM636324XC 63x63x24 1600x1600x600 Included 59x59 1496x1499 Not Required Not Required Not Required Not Required
TSFM717124XC 71x71x24 1800x1800x600 Included 67x67 1696x1699 Not Required Not Required Not Required Not Required
Stainless Steel, UL Type 12, IP 55, Single Door – Type 304
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8454.600 71x32x16 1800x800x400 8700.840 67x28 1696x699 8701.800 8701.040 8702.800 8702.040
8457.600 71x24x20 1800x600x500 8700.850 67x20 1696x499 8701.600 8701.050 8702.600 8702.050
8455.600 71x32x20 1800x800x500 8700.850 67x28 1696x699 8701.800 8701.050 8702.800 8702.050
8452.600 79x24x24 2000x600x600 8700.060 75x20 1896x499 8701.600 8701.060 8702.600 8702.060
8450.600 79x32x24 2000x800x600 8700.060 75x28 1896x699 8701.800 8701.060 8702.800 8702.060
Stainless Steel, UL Type 12, IP 55, Double Door – Type 304
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8456.600 71x47x16 1800x1200x400 8700.840 67x43 1696x1099 8701.200 8701.040 8702.200 8702.040
8453.600 71x47x20 1800x1200x500 8700.850 67x43 1696x1099 8701.200 8701.050 8702.200 8702.050
8451.600 79x47x24 2000x1200x600 8700.060 75x43 1896x1099 8701.200 8701.060 8702.200 8702.060
Stainless Steel, UL Type 12, IP 55, Single Door – Type 316L
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8454.500 71x32x16 1800x800x400 8700.840 67x28 1696x699 8701.800 8701.040 8702.800 8702.040
8457.500 71x24x20 1800x600x500 8700.850 67x20 1696x499 8701.600 8701.050 8702.600 8702.050
8455.500 71x32x20 1800x800x500 8700.850 67x28 1696x699 8701.800 8701.050 8702.800 8702.050
8452.500 79x24x24 2000x600x600 8700.060 75x20 1896x499 8701.600 8701.060 8702.600 8702.060
8450.500 79x32x24 2000x800x600 8700.060 75x28 1896x699 8701.800 8701.060 8702.800 8702.060
Stainless Steel, UL Type 12, IP 55, Double Door – Type 316L
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8456.500 71x47x16 1800x1200x400 8700.840 67x43 1696x1099 8701.200 8701.040 8702.200 8702.040
8453.500 71x47x20 1800x1200x500 8700.850 67x43 1696x1099 8701.200 8701.050 8702.200 8702.050
8451.500 79x47x24 2000x1200x600 8700.060 75x43 1896x1099 8701.200 8701.060 8702.200 8702.060
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
11
TS8 Specification Guide Note: inch measurements are rounded
Part numbers highlighted in blue are standard stock items. Other items are subject to standard lead times.
Stainless Steel UL Type 4X, IP 66 Single Door – Type 304
Part
Number
H xWxD
inches
HxWxD
mm
Sidewalls
(Pair)
Mounting
Panel
HxW
inches
Mounting
Panel
HxW
mm
4” (100 mm)
High Plinth,
Front &
Rear
4” (100 mm)
High Plinth,
Sides
8” (200 mm)
High Plinth,
Front &
Rear
8” (200 mm)
High Plinth,
Sides
8450.680 79x32x28 2000x800x600 8700.680 75x20 1896x699 8701.800 8701.060 8702.800 8702.060
Common Accessories for External Use
Description PU Part. No. Description PU Part. No.
Base Doors/Locks (continued)
Plinth bolt-down brackets 10 2817.000 Enclosure key, double-bit no. 5 1 2531.000
Replacement cover cap for 4” (100 mm) plinth 4 8601.130 Enclosure lock-out/tag-out, for 6 locks 2 2493.500
Replacement cover cap for 8” (200 mm) plinth 4 8601.140 Single interface ap, plastic 1 2482.300
Leveling feet, 1 – 2” (18 – 43 mm),
660 lb (300 kg) per leveling foot, M12 thread 44612.000 Double interface ap, plastic 1 2482.310
Twin casters, 265 lb (120 kg) per caster, black 4 7495.000 Single interface ap, metal, UL 1 2482.320
Walls Double interface ap, metal, UL 1 2482.330
Hinges for sidewalls, RAL 7035 6 8800.110 Interface ap insert, NEMA 5-15 plug 1 2482.420
Roof Interface ap insert, fused NEMA 5-15 plug 1 2482.430
Roof spacers, 0.4” (10 mm) height 4 2422.000 Interface ap Insert, 2x USB A 1 2482.540
Roof spacers, 0.8” (20 mm) height 4 2423.000 Interface ap insert, USB A, RJ 45, SUB-D9 1 2482.570
Roof spacers, 2.0” (50 mm) height 4 7967.000 Interface ap insert, blank plate 1 2482.590
Replacement eyebolts, M12 thread 4 4568.000 USB interface extension, 118” (3 meters) 1 2482.230
Button-head screws, M12 thread 20 4198.000 RJ45 interface extension, 118” (3 meters) 1 2482.720
Anti-tip wall bracket for anchoring enclosure to wall 4 4595.000 External data pocket,
16Hx14Wx3D” (409x356x76 mm) RAL7035 1 EDP1614C
Doors/Locks External data pocket,
14Hx19Wx3D” (356x487x76 mm) RAL7035 1 EDP1419C
Handle adaptor for viewing door, RAL 7035 1 8611.080 External fold-down shelf,
12Hx12Wx2D” (305x305x51 mm) 1 FDS1212C
Replacement lock catches, die-cast zinc 4 8800.040 External fold-down shelf,
18Hx18Wx2D” (457x457x51 mm) 1 FDS1818C
Replacement 130° hinges, die-cast zinc 4 8800.020 Internal fold-down shelf for
600 mm wide doors, 16Wx16D” (413x400 mm) 14638.600
180° hinges, RAL 7035 4 8800.190 Internal fold-down shelf for
800 mm wide doors, 24Wx16D” (613x400 mm) 14638.800
180° hinges, nickel plated 4 8701.180 Baying Hardware
Comfort handle, RAL 7035 1 8611.020 External baying brackets, plated sheet steel 6 8800.490
Comfort handle, padlockable, RAL 7035 1 8611.290 External baying brackets, stainless steel 6 8700.000
Key lock insert (for key #3524E) for comfort handle 1 8611.180 Eyebolt interconnection brackets, plated sheet steel 4 4540.000
Comfort handle, nickle-plated 1 8611.330 Paint
Push-button insert for comfort handle 1 8611.190 Touch-up paint, 12 oz. aerosol can, RAL 7035 1 9093.006
Key locking push-button insert
(for key #12321) for comfort handle 18611.200 Touch-up paint, 1 qt. can, RAL 7035 1 9094.006
Screwdriver lock insert for comfort handle 1 8611.140 Touch-up paint, 0.6 oz. bottle, RAL 7035 1 9095.006
TS8 Freestanding Enclosures & Accessories
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
12 Note: inch measurements are rounded TS8 Specification Guide
Part numbers highlighted in blue are standard stock items. Other items are subject to standard lead times.
Common Accessories for Internal Use
Description PU Part No. Description PU Part. No.
Door Hardware Enclosure Lights and Hardware (continued)
Door roller, for lifting a loaded door 10 4538.000 Compact light, 24V DC, 8W, 17.9” (455 mm)” 1 4140.110
Door stop 5 4583.000 Compact light, 24V DC, 14W, 28” (705 mm) 1 4140.120
Replacement spring washers for lockrods 100 8800.070 Door switch with cable, for compact light, UL 1 4315.720
Print pocket, plastic, A3 1 2513.000 Enclosure light, UL, 120V, 60Hz, 15W,
18” (455 mm) with receptacle 19968.111
Flange Mount Disconnect Enclosure light, UL, 120V, 60Hz,
18W, 24” (600 mm) with receptacle 19968.112
Interconnecting rods for 24” (600 mm) wide cabinets 10 4916.000 Door switch, without cable 1 4127.000
Interconnecting rods for 32” (800 mm) wide cabinets 10 4918.000 Universal light, UL, 110-240V, 50/60Hz,
26W, 13.5” (345 mm) 14155.500
Interconnecting rods for 47” (1200 mm) wide cabinets 10 4920.000 Power cable for universal light, UL, 118” (3000 mm) 1 4315.150
Electrical door interlock, 120V 1 2419.000 Through connection cable, UL, 24” (600 mm) 1 4315.450
Interlock activator, for main door 1 4912.000 Frame adaptor bracket, for lights or cable duct 6 8800.360
Slave-door defeater kit 1 4911.000 Magnetic mounting kit for the Compact light 2 4140.000
Replacement FMD enclosure interlock kit 1 8611.310 Grounding
Mounting Panel Hardware Ground straps, AWG 11, 6.7” (170 mm) 5 2564.000
Width divider, for 47” (1200 mm) wide enclosure* 1 8800.200 Ground straps, AWG 11, 11.8” (300 mm) 5 2567.000
Side-mount mounting panel hardware 10 8800.090 Ground straps, AWG 5, 6.7” (170 mm) 5 2565.000
Mounting panel brackets, for back to back panels 2 8800.280 Ground straps, AWG 5, 11.8” (300 mm) 5 2568.000
Full size mounting panel hinge kit* 1 8800.810 Ground straps, AWG 3, 6.7” (170 mm) 5 2566.000
Partial mounting panel hinge kit* 1 8614.100 Ground straps, AWG 3, 11.8” (300 mm) 5 2569.000
Baying Hardware Grounding rail, with isolators, 17.7” (450 mm) 200A 1 7113.000
Quick t baying clamps 6 8800.500 Cable Management
Angular/corner baying brackets 4 8800.430 Cable ties, for use with round frame holes 100 2597.000
Flat baying brackets 4 4582.500 General Hardware
Baying brackets, for use with divider wall 8 8800.470 Cage nuts, M6 50 4164.000
Suiting kit, UL type 4, RAL 7035, 70.9Hx23.6D” (1800Hx600D mm) 1 8186.504 Cage nuts, M8 50 4165.000
Suiting kit, UL type 4, RAL 7035, 78.7Hx23.6D” (2000Hx600D mm) 1 8106.504 Threaded blocks with tab, M6 50 4162.000
Suiting kit, UL type 4X, SS, 70.9Hx23.6D” (1800Hx600D mm) 1 8700.864 Threaded blocks with tab, M8 50 4163.000
Suiting kit, UL type 4X, SS, 78.7Hx23.6D” (2000Hx600D mm) 1 8700.064 M6x12 mm screws 300 2504.500
Enclosure Lights and Hardware Captive nuts, M6, for 19” (482.6 mm) rails 50 2092.200
Compact light, UL 110-240V, 50/60Hz, 8W, 17.9” (455 mm) 1 4140.210 Assembly screws, M6, T30, for 19” (482.6 mm) rails 100 7094.600
Compact light, UL 110-240V, 50/60Hz, 14W, 27.8” (705 mm) 1 4140.220 Torx head screws, M5.5x13, for use on frame 300 2486.500
*Additional parts required
TS8 12” (305 mm) Floor Stands & Solid Base Pans
Description PU 16” D (400 mm) 20” D (500 mm) 24” D (600 mm)
TS Floor Stand Kit, 12”H (305 mm), carbon steel 2 9963.522 9963.523 9963.524
TS Floor Stand Kit, 12”H (305 mm), 304 stainless steel 2 9963.525 9963.526 9963.527
TS Floor Stand Kit, 12”H (305 mm), 316L stainless steel 2 9963.528 9963.529 9963.530
TS Solid Base Pan, 48”W (1200 mm), Carbon steel 1 9963.531 9963.532 9963.533
TS Solid Base Pan, 63”W (1600 mm), Carbon steel 1 9963.534 9963.535 9963.536
TS Solid Base Pan, 71”W (1800 mm), Carbon steel 1 9963.537 9963.538 9963.539
TS Solid Base Pan, 48”W (1200 mm), 304 stainless steel 1 9963.540 9963.541 9963.542
TS Solid Base Pan, 48”W (1200 mm), 316L stainless steel 1 9963.543 9963.544 9963.545
TS8 Accessories
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
13
TS8 Specification Guide Note: inch measurements are rounded
Part numbers highlighted in blue are standard stock items. Other items are subject to standard lead times.
Height Specic Accessories
Description PU 55” (1400 mm) 63” (1600 mm) 71” (1800 mm) 79” (2000 mm) 87” (2200 mm)
Mounting panel joining piece 1 9968.448 4589.700 4590.700 4591.700 4592.700
TS to PS adaptor rail 4 – – 8800.380 8800.300 8800.320
System bars, 0.9x0.9” (23x23 mm)* 6 4393.000 4175.000 4176.000 4177.000 4178.000
System chassis, 0.9x2.9” (23x73 mm)* 4 – – 4379.000 4380.000 4381.000
Cable duct, 1.6” (50 mm) width 8 – 8800.570 8800.520 – –
Cable duct, 3.9” (100 mm) width 4 – 8800.540 8800.510 – –
19” rails, C-shaped* 2 7827.140 7827.160 7827.180 7827.200 7827.220
19” rails, L-shaped* 2 7827.141 7827.161 7827.181 7827.201 7827.221
19” rails, extruded aluminum 4 –8613.060 8613.080 8613.000 8613.020
*Additional parts required
Width Specic Accessories
Description PU 16” (400 mm) 20” (500 mm) 24” (600 mm) 32” (800 mm) 40” (1000 mm) 48” (1200 mm)
Door Support Rails 20 4594.000 4309.000 4596.000 4598.000 4599.000 –
Folding desk panel, internal, door-mount 1 – – 4638.600 4638.800 – –
Print pocket, sheet steel, RAL 7035 1 4114.000 4115.000 4116.000 4118.000 4124.000 –
Mounting panel support rails 2 –––– 4333.120
Partial mounting panel, 20Hx12W” (500x300 mm) 1 8614.640 –8614.640 –––
Partial mounting panel, 20Hx16W” (500x400 mm) 1 – – 8614.650 –––
Partial mounting panel, 20Hx20W” (500x500 mm) 1 – – 8614.660 –––
Partial mounting panel, 20Hx28W” (500x700 mm) 1 – – 8614.680 8614.680
Partial mounting panel, 20Hx31W” (500x775 mm) 1 – – 8614.675 –––
Partial mounting panel, 28Hx12W” (700x300 mm) 1 8614.840 – – 8614.840 – –
Partial mounting panel, 28Hx16W” (700x400 mm) 1 –––8614.850 – –
Partial mounting panel, 28Hx28W” (700x700 mm) 1 –––8614.880 – –
Partial mounting panel, 35Hx12W” (900x300 mm) 1 8614.040 – – – 8614.040 –
Partial mounting panel, 35Hx16W” (900x400 mm) 1 ––––8614.050 –
Partial mounting panel, 35Hx20W” (900x500 mm) 1 – – 8614.060 –8614.060 –
Partial mounting panel, 43Hx12W” (1100x300 mm) 1 8614.240 – – – – 8614.240
Partial mounting panel, 43Hx16W” (1100x400 mm) 1 –––––8614.250
Partial mounting panel, 43Hx20W” (1100x500 mm) 1 – – 8614.260 – – 8614.260
TS system chassis with ange, for outer level 4 8612.140 8612.150 8612.160 8612.180 8612.100 8612.120
TS system chassis with ange, for inner level 4 8612.040 8612.050 8612.060 8612.080 8612.000 8612.020
TS system chassis with ange (PS hole pattern) 4 –8612.550 8612.560 8612.580 8612.500 8612.520
System bars, 0.9x0.9” (23x23 mm)* 12 4169.000 4170.000 4171.000 4172.000 4173.000 4174.000**
PS system chassis without ange 4 4374.000 4375.000 4376.000 4377.000 4382.000 4378.000
PS system chassis with ange 4 8800.640 8800.650 4364.000 4365.000 4373.000 4367.000
HD punched rails 1.0x1.5” (25x38 mm) 2 8612.740 8612.750 8612.760 8612.780 – –
HD system chassis without ange 2 –8612.650 8612.660 8612.680 – –
System support rails, with T-head screws 2 – – 4361.000 4362.000 4347.000 4363.000
Heavy duty support rails, with holes 4 4394.000 4395.000 4396.000 4398.000 – –
Cable duct, 1.6” (40 mm) width 20 – – 8800.731 8800.736 8800.741 8800.746
Cable duct, 3.9” (100 mm) width 12 – – 8800.734 8800.739 8800.744 8800.749
Partial swing frame, 12U 1 – – 2377.090 2377.120 – –
Partial swing frame installation kit 1 – – 2377.860 2377.880 – –
130° full height swing frame installation kit 1– – 1994.835 1995.235 – 1996.535
180° full height swing frame installation kit –––1997.235 – –
Door interlocking rods, FMD 10 – – 4916.000 4918.000 –4920.000
*Additional parts required
**6 PU
TS8 Accessories
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
14 Note: inch measurements are rounded TS8 Specification Guide
Part numbers highlighted in blue are standard stock items. Other items are subject to standard lead times.
Depth Specic Accessories
Description PU 16” (400 mm) 20” (500 mm) 24” (600 mm) 32” (800 mm)
Top baying cover, RAL 7035 1 8800.840 8800.850 8800.860 8800.880
Top baying cover, 304SS 1 8700.140 8700.150 8700.160 –
Partial mounting panel, 20Hx12W” (500 x 300 mm) 1 8614.640 –8614.640 –
Partial mounting panel, 20Hx16W” (500 x 400 mm) 1 –8614.650 8614.650 –
Partial mounting panel, 20Hx20W” (500 x 500 mm) 1 – – 8614.660 –
Partial mounting panel, 20Hx28W” (500 x 700 mm) 1 – – 8614.680 8614.680
Partial mounting panel, 20Hx31W” (500 x 775 mm) 1 – – 8614.675 –
Partial mounting panel, 28Hx12W” (700 x 300 mm) 1 8614.840 – – 8614.840
Partial mounting panel, 28Hx16W” (700 x 400 mm) 1 –8614.850 –8614.850
Partial mounting panel, 28Hx28W” (700 x 700 mm) 1 –––8614.880
Partial mounting panel, 35Hx12W” (900 x 300 mm) 1 8614.040 – – –
Partial mounting panel, 35Hx16W” (900 x 400 mm) 1 –8614.050 – –
Partial mounting panel, 35Hx20W” (900 x 500 mm) 1 – – 8614.060 –
Partial mounting panel, 35Hx12W” (900 x 300 mm) 1 8614.240 – – –
Partial mounting panel, 35Hx16W” (900 x 400 mm) 1 –8614.250 – –
Partial mounting panel, 35Hx20W” (900 x 500 mm) 1 – – 8614.260 –
TS system chassis with ange, for outer level 4 8612.140 8612.150 8612.160 8612.180
TS system chassis with ange, for inner level 4 8612.040 8612.050 8612.060 8612.080
TS system chassis with ange (PS hole pattern) 4 –8612.550 8612.560 8612.580
System bars, 0.9x0.9” (23x23 mm)* 12 4169.000 4170.000 4171.000 4172.000
PS system chassis without ange 4 4374.000 4375.000 4376.000 4377.000
PS system chassis with ange* 4 8800.640 8800.650 4364.000 4365.000
HD punched rails 1.0x1.5” (25x38 mm) 2 8612.740 8612.750 8612.760 8612.780
HD system chassis without ange 2 –8612.650 8612.660 8612.680
Top-mounted transformer rails 2 – 9960.644 9960.643 9960.645
Heavy duty support rails, with holes 4 4394.000 4395.000 4396.000 4398.000
*Additional parts required
Shelves
Description PU 24Wx20”D
(600x500 mm)
24Wx24”D
(600x600 mm)
24Wx32”D
(600x800 mm)
32Wx20”D
(800x500 mm)
32Wx24”D
(800x600 mm)
32Wx32”D
(800x800 mm)
Shelf, 110 lb. (50 kg), vented
(mounted with system chassis)* 17164.035 7165.035 7166.735 7184.035 7185.035 7186.735
Shelf, 110 lb. (50 kg), solid
(mounted with system chassis)* 17264.035 7265.035 – – – –
Shelf, 220 lb. (100 kg), vented
(mounted with system chassis)* 17464.035 7465.035 7466.735 7484.035 7485.035 7486.735
Telescopic slides, for 110 lb. (50 kg)
chassis mounted shelves 27061.000 7081.000 7161.700 7061.000 7081.000 7161.700
Telescopic slides, for 220 lb. (100 kg)
chassis mounted shelves 27064.000 7065.000 7066.700 7064.000 7065.000 7066.700
Shelf, 165 lb. (75 kg), xed, vented
(frame mounted) 1–7828.660 7829.680 – 7828.680 7828.880
Rack/panel mounted shelf, 9.8” (250 mm) depth 1 7119.250 7119.250 7119.250 7119.250 7119.250 7119.250
Rack/panel mounted shelf, 15.8” (400 mm) depth 1 7119.400 7119.400 7119.400 7119.400 7119.400 7119.400
Rack/door mount shelf/writing table,
17.7x11.6” (450x295 mm) 17183.100 7183.100 7183.100 7183.100 7183.100 7183.100
*Additional parts required
TS8 Accessories
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
15
TS8 Specification Guide Note: inch measurements are rounded
Part numbers highlighted in blue are standard stock items. Other items are subject to standard lead times.
Replacement Doors and Mounting Panels
Description PU 55”Hx24”W
(1400x600 mm)
55”Hx32” W
(1400x800 mm)
55Hx47”W
(1400x1200 mm) –––
Single door 1 8645.593 8845.593 – – – –
Left door 1 – – 8245.592 – – –
Right door 1 – – 8245.593 – – –
Mounting panel 1 8645.791 8845.791 8245.791 – – –
Description PU 63”Hx24”W
(1600x600 mm)
63”Hx32”W
(1600x800 mm)
63”Hx47”W
(600x1200 mm) –––
Single door 1 8665.593 8865.593 – – – –
Left door 1 – – 8265.592 – – –
Right door 1 – – 8265.593 – – –
Mounting panel 1 8665.791 8865.791 8265.791 – – –
Description PU 71”Hx24”W
(1800x600 mm)
71”Hx32”W
(1800x800 mm)
71”Hx39”W
(1800x1000 mm)
71”Hx47”W
(1800x1200 mm)
71”Hx63”W
(1800x1600 mm)
71”Hx71”W
(1800x1800 mm)
Single door 1 8684.593 8884.593 8084.593 – – –
Left door 1 – 8880.592 8080.592 8284.592 8901.800 8901.820
Right door 1 – 8880.593 8080.593 8284.593 8901.810 8901.830
Viewing door 1 8610.680 8610.880 ––––
Mounting panel 1 8684.791 8880.791 8080.791 8284.791 8901.960 8901.970
Description PU 79”Hx24”W
(2000x600 mm)
79”Hx32”W
(2000x800 mm)
79”Hx39”W
(2000x1000 mm)
79”Hx47”W
(2000x1200 mm)
79”Hx63”W
(2000x1600 mm)
79”Hx71”W
(2000x1800 mm)
Single door 1 8604.593 8804.593 8006.596 –––
Left door 1 – – 8005.592 8204.592 8901.840 8901.860
Right door 1 – – 8005.593 8204.593 8901.850 8901.870
Viewing door 1 8610.600 8610.800 ––––
Mounting panel 1 8604.791 8804.791 8005.791 8204.791 8901.980 8901.990
Description PU 87”Hx24”W
(2200x600 mm)
87”Hx32”W
(2200x800 mm)
87”Hx39”W
(2200x1000 mm)
87”Hx47”W
(2200x1200 mm) –– ––
Single door 1 8626.593 8826.593 8026.593 –––
Left door 1 – – – 8226.592 – –
Right door 1 – – – 8226.593 – –
Viewing door 1 8610.620 8610.820 – – –
Mounting panel 1 8626.791 8826.791 8026.791 8226.791 – –
Modular Front (MC) Accessories
Description PU 24” W (600 mm) 32” W (800 mm)
Trim piece, 11.8” (300 mm) height, hinged at top 1 8801.230 8801.240
Door stay, for hinged trim piece 2 8801.260 8801.260
Trim panel set, 3.9” (100 mm) height 1 8801.510 8801.110
Cross mullion/member 5 8801.630 8801.830
Partial door, 7.9” (200 mm) height 1 8801.520 8801.120
Partial door, 15.7” (400 mm) height 1 8801.540 8801.140
Partial door, 23.6” (600 mm) height 1 8801.560 8801.160
Partial door, 31.5” (800 mm) height 1 8801.580 8801.180
Partial door, 39.4” (1000 mm) height 1 8801.500 8801.100
Partial viewing door, 15.7” (400 mm) height 1 8801.550 –
Partial viewing door, 23.6” (600 mm) height 1 8801.570 8801.170
Partial viewing door, 31.5” (800 mm) height 1 8801.590 –
Keyboard drawer, 7.9” (200 mm) height 1 8801.715 8801.915
External desk/writing unit, 7.9” (200 mm) height 1 8801.705 –
MC sidewalls, 78.7” (2000 mm) height 2 8106.512 8108.512
TS8 Accessories
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
7/10 • US176
Precision Modications to Suit Your Needs
Because Rittal produces the most flexible standard lineup of modular
freestanding, wallmount and junction box enclosures and accessories available
in the world today, there is an excellent chance you may find what you’re
looking for right off the shelf—in a wide variety of construction materials and
protection ratings. If you decide that a more customized product is right for
you, you can choose to modify any of our standard products or start from
scratch with a newly designed, comprehensive solution.
Rittal’s Focus Factory is an independent production and assembly operation
located in our Urbana, Ohio facility that is dedicated solely to creating
customer-specific products. Assembly and integration of Rittal parts into
custom solutions can be completed and shipped in as little as 4 weeks.
Quote-to-order, custom-engineered products including those with cutouts and
special paint colors or finishes are evaluated on a case-by-case basis and we
will be happy to provide you with an estimated production time for your specific
situation.
Rittal — TS Specication Guide
Want to nd out more about Rittal’s industrial cabinets and our complete line of industrial products?
Visit www.rittal-corp.com/industrial to see how Rittal can help turn your vision into reality.
Learn More About Rittal Industrial Enclosures and Climate Control Products
Rittal offers industrial enclosures, climate control products, and related accessories –
go to www.rittal-corp.com/literature to order or download these publications:
Industrial Buyer’s Guide
Rittal's comprehensive overview
of industrial and climate control
products and accessories.
JB and WM Specication Guide
Rittal’s WM and JB enclosures meet the
needs of the North American market and
are readily available in all of the most
popular sizes, protection categories and
configurations.
Rittal Corporation • 1 Rittal Place • Urbana, Ohio 43078 USA • Phone: 937-399-0500 • Fax: 800-477-4003 • Toll-free: 800-477-4000
Email: rittal@rittal-corp.com • Online: www.rittal-corp.com
Rittal Systems Ltd. • 7320 Pacic Circle • Mississauga, Ontario L5T 1V1 • Canada • Phone: 905-795-0777 • Fax: 905-795-9548
Toll-free: 800-399-0748
The Rittal Corporation is the U.S. subsidiary of Rittal GmbH & Co. KG and manufactures the world’s leading industrial and
IT enclosures, racks and accessories, including climate control and power management systems for industrial, data center,
outdoor and hybrid applications. For more information about Rittal and its products, please visit www.rittal-corp.com or
call 1-800-477-4000.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Navigation menu