Product Detail Manual

2016-10-06

: Pdf 156571-Attachment 156571-Attachment B5 unilog

Open the PDF directly: View PDF PDF.
Page Count: 8

www.tnb.ca A101
Metallic – Aluminum
T&B Cable Tray
Splice Plates
T&B aluminum cable tray is composed of two distinct systems
H-Style and U-Style. These systems are interchangeable.
Snap-In Splice Plate
Designed to lock into place for
easy alignment and installation.
Packaged in pairs with zinc
plated hardware.
Provided as standard with each
straight and fitting.
Cat. No.
Material Siderail Height
ABW-4-SSP
Aluminum
4
ABW-5-SSP
5
ABW-6-SSP
6
ABW-7-SSP
7
Snap-In Expansion Splice Plate
Allows for a 1 in. expansion or
contraction of tray system.
Packaged in pairs with zinc
plated hardware.
Cat. No.
Material Siderail Height
ABW-4-ESP
Aluminum
4
ABW-5-ESP
5
ABW-6-ESP
6
ABW-7-ESP
7
Horizontal Adjustable Plate
Cat. No.
Material Siderail Height (in.) For Tray Width
ABW(*)24HSP
Aluminum
46 in. to 24 in.
inclusive
5
ABW(*)36HSP
630 in. to 36 in.
inclusive
7
Adjustable hinge plates provide maximum horizontal installation flexibility.
Furnished in pairs with hardware..
(*) Insert Siderail Height.
Vertical Adjustable Plate
Cat. No.
Material Siderail Height in.
ABW-4-VSP
Aluminum
4
ABW-5-VSP
5
ABW-6-VSP
6
ABW-7-VSP
7
Hinged vertical plates
provide maximum flexibility
for changes in elevation.
Furnished in pairs
with hardware.
www.tnb.ca
A102
Metallic – Aluminum
T&B Cable Tray
Straight
Offset
Splice Plates
Branch Pivot Connectors
Cat. No.
Material Siderail Height (in.)
ABW-4-BPC
Aluminum
4
ABW-5-BPC
5
ABW-6-BPC
6
ABW-7-BPC
7
Box to Tray Plates
Cat. No.
Material Siderail Height (in.)
ABW-4-BSP
Aluminum
4
ABW-5-BSP
5
ABW-6-BSP
6
ABW-7-BSP
7
Designed to secure tray to electrical panels or boxes, walls or end supports.
Furnished in pairs with hardware.
Closure End Plate
Cat. No.
Material Siderail Height (in.) Widths of Tray (in.)
ABW-4-ESP
Aluminum
406
09
ABW-5-ESP
512
18
ABW-6-ESP
624
30
ABW-7-ESP
736
Provides closure for any tray end. Packaged with hardware. (*) Insert width of Tray.
Reducing Splice Plate
Cat. No.
Material Siderail Height (in.)
ABW-4(*)-RSP
Aluminum
4
ABW-5(*)-RSP
5
ABW-6(*)-RSP
6
ABW-7(*)-RSP
7
Used in pairs to provide a straight reduction or used with a standard splice plate for an offset
reduction. Packaged with hardware.
NOTE: (*) For offset reduction: insert width to be reduced. For straight reduction: insert 1/2 width
to be reduced (2 required). Example: ABW-403-RSP = 3 in. offset reducer.
Step Down Splice Plate
Cat. No.
Material Siderail Height (in.)
ABW(*)(**)SDS
Aluminum 4
(*) Siderail Height 1. (**) Siderail Height 2. NOTE: Siderail Height 1
is greater then Siderail Height 2.
5
6
7
Connects siderails of different heights. Hardware included.
T&B aluminum cable tray is composed of two distinct systems
H-Style and U-Style. These systems are interchangeable.
Allows cables to run from one tray level to another.
www.tnb.ca A103
Metallic – Aluminum
T&B Cable Tray
Features
• Factory pre-drilled side rails for above series easy installation.
• Allows random connexion location.
• Tested loading 160 lb./ft., based on a 20 ft.. simple beam test with 1.5 safety factor
(tested with AH66 series).
• Supplied with stainless steel type 316 hardware.
• Available on ladder, vented or solid tray style.
• Only available in the following series of aluminum tray: AH46, AH56, AH66 and AH76*.
*(20 ft.. Support Span only).
The Splice Plate
Part #: ABW6SSPMS
3/8 in.-16 x 3/4 in.
SS316 carriage bolt and serrated flanged
nuts
Mid-Span Slice Plate
Reinforcing plate
3/8 in.-16 x 1 in.
SS316 carriage blot
and serrated flanged nuts
Cable Tray
Splice Plates
Mid-Span Splice Plate
Aluminum Mid-Span Splice Plate
www.tnb.ca
A104
Metallic – Aluminum
T&B Cable Tray
Straight Section Number Selection
(AMS4-6)-24-L09-6
Material Series Siderail Depth Width Bottom Type Length
AMS • Mid-Span Splice 4 • Series 4
5 • Series 5
6 • Series 6
7 • Series 7
6 • (6 in.) 06 • (6 in.)
09 • (9 in.)
12 • (12 in.)
18 • (18 in.)
24 • (24 in.)
30 • (30 in.)
36 • (36 in.)
L06 • 6 in. rung spacing
L09 • 9 in. rung spacing
L12 • 12 in. rung spacing
V • Ventilated
S • Solid Trough
6 •(6 meters)
288 •(24 ft.)
To order straight sections with Mid-Span Splice Plate, replace “AH” in the standard part number with “AMS”.
Example: AH6624L12-6
AMS6624L12-6
Prefix
Splice Plates
Mid-Span Splice Plate
Typical Installation of Mid-Span Splice Plate
These heavy-duty splice plates are designed to allow random splice location,
including the midspan for 20 ft.. support spans. These splices are available
for all long-span, ladder, vented or solid tray style.
www.tnb.ca A105
Metallic – Aluminum
T&B Cable Tray
Splice Plates
Over Support Splice Adaptor
Over Support
Splice Adaptor
(Beam Installation)
• Place splices directly over supports
• No additional support required
www.tnb.ca
A106
Metallic – Aluminum
T&B Cable Tray
Over Support Splice Adaptor
Beam Installation – ABW46-OSS-B
2
3
4
5
4
3
6Required on
anchored joint only
Required on
expansion
joint only
BOTTOM VIEW
1. Bonding jumper
2. Splice plate
3. Over support splice adaptor
4. Beam clamp
5. Hold down clamp
6. Structural beam
7. Strut (see right page)
Installation Components
Standard 1/4 Span
Typical Installation
Supports are placed at 1/4
span (25%).
Expansion joints need extra
support at 1/2 span to prevent
excessive deformation of the
tray under heavy loads.
New Over Support
Typical Installation
Supports are placed right
under the joints of the
installation.
The splice adaptor allows a
wider distribution of the
support, therefore minimizing
the stress and deflection of
the assembly.
Over Support
Splice Adaptor
Span
Span
25% Span 25% Span
Expansion
Splice Plate
Standard
Splice Plate
Standard Splice Plate
NOTE: Independent of the installation method chosen, AU/AH46 straight
sections are CSA approved for Class E loading. (100%)
Splice Plates
Over Support Splice Adaptor
1
www.tnb.ca A107
Metallic – Aluminum
T&B Cable Tray
Over Support Splice Adaptor
Strut Installation – ABW46-OSS-S
12
3
5
5
Required on
anchored joint only
Required on
expansion
joint only
INSIDE VIEW
• Everysecondsplicemustbeanexpansionjoint.
• Forgapsettingatexpansionjoint,refertoNEMA
chart on next page.
• ForusewithT&BCableTrayseriesAH46.
• Max.loadof80lb/ft,20ft.span.
• Everyjointmusthaveapairofoversupport
splice adaptors (both standard splices and
expansion splices)
Cable Tray Installation
Extra Support Required
Over Support
Splice Adaptor
Over Support
Splice Adaptor
25% Span 25% Span
Standard
Splice Plate
Expansion
Splice Plate Standard Splice Plate
NEMA VE2: Splice joints should be designed and placed so as to maximize the rigidity of the cable tray over support. Splice
plates and adaptors are part of a system specifically designed for placement directly over supports.
7
www.tnb.ca
A108
Metallic – Aluminum
T&B Cable Tray
ABW46-OSS-S
Over Support Splice Adaptor –
Strut Installation
Expansion Plate Gap Chart
Gap Settings po (mm)
Metal Temperature at Time for Installation
ABW46-OSS-B
Over Support Splice Adaptor –
Beam Installation
Splice Plates
Over Support Splice Adaptor
Expansion over support beam 29 in.
SHW-CTC, Heavy-Duty hold down clamp (complete with mounting hardware)
SHW-HEC, Standard hold down clamp
E142-3/8x100EG,3/8in.-16x1in.hexcapscrews
AC100-3/8EGC,3/8in.strutnut
NOTE:EveryexpansionjointrequirestheuseofabondingjumpersuchasFBD16-1(16in.,600amps)
Expansion over support beam 29 in.
SHW-HEC, Standard hold down clamp
E142-3/8x100EG,3/8in.-16x1in.hexcapscrews
AC100-3/8EGC,3/8in.strutnut
NOTE:EveryexpansionjointrequirestheuseofabondingjumpersuchasFBD16-1(16in.,600amps)

Navigation menu