Brochure
2016-09-04
: Pdf 162844-Brochure 162844-Brochure B4 unilog
Open the PDF directly: View PDF .
Page Count: 2
![](asset-1.png)
Scotchlok™Terminals
MU18-6RHT/S thru MU4-38RHT
Ring Tongue, High Temperature, Non-Insulated, Butted Seam
Data Sheet
Specifications
Wire Size: See Table Above
Barrel Seam: Butted
Max. Operating Temp.: 900˚F (482˚C)
Max. Current: Same as Wire
Terminal Material: Steel
Terminal Plating: Nickel
Installation Information
For use on stranded copper (AWG) wire only.
Strip away the end 3/8 inch of wire insulation.
Make the crimp in the proper station of a recommended
3M crimp tool: TH-440, TH-450 (scissor style), or
TR-490 (ratchet style) hand tools. For larger gauges use
TH-450 (for 8 and 6 AWG): (T & B) WT 115-A,
Burndy MY29-3.
Barrel Crimp (Electrical)
L
W
EC
tcudorP rebmuN
eriW egnaR )GWA( dutS eziSWCLE ssenkcihT lerraB htgneL lerraB .D.I
S/THR6-81UM81-22652.022.006.074.0030.052.0070.0
THR01-81UM81-220133.092.007.045.0030.052.0070.0
S/THR6-41UM41-61652.022.006.074.0030.052.0090.0
THR01-41UM41-610133.092.007.045.0030.052.0090.0
THR41-41UM41-61 ₄⁄¹ 65.004.039.056.0030.052.0090.0
THR01-01UM01-210183.092.037.045.0040.052.0090.0
THR41-01UM01-21 ₄⁄¹ 95.044.099.096.0040.052.0531.0
S/THR41-8UM8
₄⁄¹ 74.004.059.017.0050.013.0581.0
THR83-6UM6
₈⁄³ 36.025.022.119.0050.093.0552.0
THR83-4UM4
₈⁄³ 86.035.043.100.1570.074.0582.
0
WARNING
Turn power off before installing or removing terminal. All electrical
work should be done according to appropriate electrical codes.
![](asset-2.png)
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd Litho in USA.
© 3M 2002 78-8126-0515-8-A
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be,
at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will
not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential
regardless of the legal theory asserted.
3M and Scotchlok are trademarks of 3M
Engineering Specification
Crimp-type terminals shall, electrically and
mechanically, connect to a pre-stripped end of a
stranded copper wire: and have a flat tongue portion
with a central opening for mounting around a screw or
stud.
The high temperature non-insulated, butted seam ring
tongue terminal shall be nickel-plated, steel, with the
tongue having a specified stud slot (size 6 thru 3/8 in.)
and a butted seam barrel with a beveled I.D. for ease of
stranded wire entry, sized for a specified (AWG) wire
range (22-18, 16-14, 12-10, 8, 6, 4).