FCC Report_CISPR22 179119 Certification Magic Control
2016-04-06
: Pdf 179119 Fcc Certification Magic Control 179119_FCC_certification--Magic_Control CertsReports 179119 ProductFiles
Open the PDF directly: View PDF 
.
Page Count: 30
| Download | |
| Open PDF In Browser | View PDF |
FCC TEST REPORT for USB 2.0 Graphic Card Model No.: UVT100 of COPY Applicant: Magic Control Technology Corporation Address: 6F, .#120-11, Chung Shan Rd, Sec. 3, Chung Ho, 235 Taipei, Taiwan, R. O. C. Tested and Prepared by ETS Product Service (Taiwan) Co., Ltd. FCC Registration No.: 930600 Industry Canada filed test laboratory Reg. No. IC 5679 A2LA Accredited No.: 2300.01 PTCRB Accredited Type Certification Test House Report No.: W6M20708-8430-P-15B 6F, NO. 58, LANE 188, RUEY-KUANG RD., NEIHU TAIPEI 114, TAIWAN, R.O.C. TEL: 886-2-66068877 FAX: 886-2-66068879 E-mail: ets@ets-bzt.com.tw Registration number: W6M20708-8430-P-15B TABLE OF CONTENTS 1 General Information 2 1.1 1.2 1.3 Notes Tester Testing laboratory 1.3.1 Location 2 4 5 5 1.3.2 Details of accreditation status 5 1.3.3 Test location, where different from ETS Product Service (Taiwan) Co., Ltd. Details of applicant Application details Test item 1.6.1 Description of test item 5 6 6 6 6 1.6.2 Manufacturer (if different from applicant in point 1.4) 7 1.4 1.5 1.6 COPY 1.6.3 Frequency behavior 1.7 7 Test standards 7 2 Technical test 2.1 2.2 2.3 2.4 Summary of test results Test environment Test equipment utilized Test results 2.4.1 Radiated Emission 8 8 9 11 12 2.4.2 Conducted Emission 13 Test protocols 2.5.1 Radiated Emission 14 14 2.5.2 Conducted Emission 15 Equipment Modification 16 2.5 2.6 3 Normative references 8 17 Appendix : Pictures and diagrams ETS Product Service (Taiwan) Co., Ltd. Page 1 of 17 Registration number: W6M20708-8430-P-15B 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The tests were carried out and passed in accordance to the standards: FCC part 15 : May 2007 COPY The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has Passed all the relevant tests conforms to a specification (only telecommunication products). Neither is there any guarantee that such a test sample will interwork with other genuinely open systems. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that its performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.6. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the ETS Product Service (Taiwan) Co., Ltd. ETS Product Service (Taiwan) Co., Ltd. Page 2 of 17 Registration number: W6M20708-8430-P-15B Important Notes: Proper labeling is required for each device. Devices shall be labeled in accordance with labeling requirements pursuant to section 15.19 and section 2.1074 of the FCC rules. Devices subject to a Declaration of Conformity shall be uniquely identified by the responsible party. This identification shall not be of a format which could be confused with the FCC Identifier required on certified, notified type accepted or type approved equipment. The responsible party shall maintain adequate identification records to facilitate positive identification for each device. The user manual or instruction manual shall included also a warning statement that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Reference Section 15.21 Furthermore an information to the user regarding to the interference potential of the device and about simple measures that can be taken to correct interference is required. Reference Section 15.105 The responsible party must warrant that each unit of equipment marketed under a Declaration of Conformity is identical to the unit tested and found acceptable with the standards and that the records maintained by the responsible party continue to reflect the equipment being produced under the Declaration of Conformity within the variation that can be expected due to quantity production and testing on a statistical basis. COPY ETS Product Service (Taiwan) Co., Ltd. Page 3 of 17 Registration number: W6M20708-8430-P-15B 1.2 Tester September 04, 2007 Jay Chaing ___________________________________________________________________ Date ETS-Lab. Test Engineer Signature COPY Technical responsibility for area of testing: September 04, 2007 Steven Chuang ____________________________________________________________________ Date ETS ETS Product Service (Taiwan) Co., Ltd. Name Signature Page 4 of 17 Registration number: W6M20708-8430-P-15B 1.3 Testing laboratory 1.3.1 Location OATS No.5-1, Shuang Sing Village, LiShuei Rd., Wanli Township, Taipei County 207, Taiwan (R.O.C.) Company ETS Product Service (Taiwan) Co., Ltd. 6F, NO. 58, LANE 188, RUEY-KUANG RD. NEIHU, TAIPEI 114, TAIWAN R.O.C. Tel : 886-2-66068877 Fax : 886-2-66068875 1.3.2 Details of accreditation status COPY Accredited testing laboratory A2LA accredited number: 2300.01 FCC filed test laboratory Reg. No. 930600 Industry Canada filed test laboratory Reg. No. IC 5679 PTCRB Accredited Type Certification Test House 1.3.3 Test location, where different from ETS Product Service (Taiwan) Co., Ltd. Name: Street: Town: Country: Telephone: Fax: Teletex: ./. ./. ./. ./. ./. ./. ./. ETS Product Service (Taiwan) Co., Ltd. Page 5 of 17 Registration number: W6M20708-8430-P-15B 1.4 Details of applicant Name Street City Country Telephone Fax Teletex : : : : : : : Magic Control Technology Corporation 6F,.#120-11,Chung Shan Rd, Sec. 3, Chung Ho, 235 Taipei, Taiwan, R. O. C. +886-2-3234-6616 +886-2-3234-6606 ./. : : August 20, 2007 from August 21, 2007 to August 31, 2007 1.5 Application details Date of receipt of test item Date of test COPY 1.6 Test item 1.6.1 Description of test item Type of product : USB 2.0 Graphic Card Type identification : UVT100 Multi-listing model number : ./. Brand Name : ./. Photos : Please find in Appendix. ETS Product Service (Taiwan) Co., Ltd. Page 6 of 17 Registration number: W6M20708-8430-P-15B 1.6.2 Manufacturer (if different from applicant in point 1.4) Name Street Town Country Contact Phone 1.6.3 : ./. : ./. : ./. : ./. : ./. : ./. Frequency behavior Highest clock Frequency < 200 MHz COPY 1.7 Test standards FCC part 15 : May 2007 ETS Product Service (Taiwan) Co., Ltd. Page 7 of 17 Registration number: W6M20708-8430-P-15B 2 Technical test 2.1 Summary of test results : No deviations from the technical specification(s) were ascertained in the course of the tests performed. Or The deviations as specified in 2.4 were ascertained in the course of the tests performed. 2.2 Test environment Temperature: COPY 18 ... 25 oC Relative humidity content 20 ... 75 % Air pressure: 860 ... 1030 hPa Details of power supply battery: 5 VDC ( power on PC ) Other parameters: without ETS Product Service (Taiwan) Co., Ltd. Page 8 of 17 Registration number: W6M20708-8430-P-15B 2.3 Test equipment utilized No. Cal. Manufacturer Cal. Date Next Date Test equipment Type Serial No. ETSTW-CE 001 EMI TEST RECEIVER ESHS10 842121/013 ETSTW-CE 002 PREREULATOR MODE DC POWER SUPPLY None None ETSTW-CE 003 AC POWER SOURCE APS-9102 D161137 GW ETSTW-CE 004 ZWEILEITER-VNETZNACHBILDUNG TWOLINE V-NETWORK ESH3-Z5 840731/011 R&S 2006/10/16 2007/10/15 ETSTW-CE 005 Line-Impedance Stabilisation Network NNBM 8126D 137 Schwarzbeck 2006/10/16 2007/10/15 ETSTW-CE 006 IMPULSBEGRENZER PULSE LIMITER ESH3-Z2 100226 R&S ETSTW-CE 008 ABSORBING CLAMP MDS 21 3469 Schwarzbeck 2005/10/24 2007/10/23 MAA0305-009 GIANT FORCE 2007/8/2 2008/8/1 20242 FCC 2005/12/8 2007/12/7 ETSTW-CE 009 TEMP.&HUMIDITY CHAMBER GTH-225-40-1P-U ETSTW-CE 013 CISPR 22 TWO BALANCED TELECOM PAIRS IMPEDANCE FCC-TLISN-T4-02 STABILIZATION NETWORK R&S 2006/10/16 2007/10/15 Function Test Function Test In House Certificate CISPR 22 TWO BALANCED COPY ETSTW-CE 014 TELECOM PAIRS IMPEDANCE FCC-TLISN-T2-02 20241 FCC 2005/12/7 2007/12/6 20307 FCC 2006/11/7 2008/11/6 STABILIZATION NETWORK CISPR 22 TWO BALANCED ETSTW-CE 015 TELECOM PAIRS IMPEDANCE FCC-TLISN-T8-02 STABILIZATION NETWORK ETSTW-CE 016 TWO-LINE V-NETWORK ENV216 100050 R&S 2006/11/21 2007/11/20 Function Generator 33220A MY43004982 Agilent 2005/10/14 2007/10/13 EMI TEST RECEIVER ESI 26 831438/001 R&S 2006/10/20 2007/10/19 EMI TEST RECEIVER ESI 40 832427/004 R&S 2006/10/30 2007/10/29 ETSTW-RE 005 EMI TEST RECEIVER ESVS10 843207/020 R&S 2006/10/12 2007/10/11 ETSTW-RE 010 PROGRAMMABLE LINEAR POWER SUPPLY LPS-305 30503070181 MOTECH Function Test ETSTW-RE 011 PROGRAMMABLE LINEAR POWER SUPPLY LPS-305 30503070165 MOTECH Function Test ETSTW-RE 017 Log-Periodic Antenna HL025 352886/001 R&S 2006/5/4 2008/5/3 ETSTW-RE 018 MICROWAVE HORN ANTENNA AT4560 27212 AR 2004/11/8 2007/11/7 ETSTW-RE 020 MICROWAVE HORN ANTENNA AT4002A 306915 AR ETSTW-RE 021 SWEEP GENERATOR SWM05 835130/010 R&S ETSTW-RE 027 Passive Loop Antenna 6512 00034563 EMCO ETSTW-RE 028 Log-Periodic DipoleArray Antenna 3148 34429 EMCO 2006/5/26 2008/5/25 ETSTW-RE 029 Biconical Antenna 3109 33524 EMCO 2006/5/26 2008/5/25 ETSTW-RE 030 Double-Ridged Guide Horn Antenna 3117 00035224 EMCO 2006/5/3 2008/5/2 ETSTW-RE 032 Millivoltmeter URV 55 849086/013 R&S 2006/10/11 2007/10/10 ETSTW-RE 034 Power Sensor URV5-Z4 839313/006 R&S 2005/10/17 2007/10/16 ETSTW-RE 042 Biconical Antenna HK116 100172 R&S 2007/1/11 2009/1/10 ETSTW-RE 043 Log-Periodic Dipole Antenna HL223 100166 R&S 2006/5/8 2008/5/7 ETSTW-RE 044 Log-Periodic Antenna HL050 100094 R&S 2006/5/29 2008/5/28 ETSTW-RE 002 ETSTW-RE 003 ETSTW-RE 004 ETS Product Service (Taiwan) Co., Ltd. Function Test 2006/10/11 2007/10/10 In House Certificate Page 9 of 17 Registration number: W6M20708-8430-P-15B ETSTW-RE 048 Triple Loop Antenna HXYZ 9170 HXYZ 9170-134 Schwarzbeck 2005/3/22 2008/3/21 ETSTW-RE 049 TRILOG Super Broadband test Antenna VULB 9160 9160-3185 Schwarzbeck 2007/5/2 2009/5/1 ETSTW-RE 055 SPECTRUM ANALYZER FSU-26 200074 R&S 2007/7/16 2008/7/15 ETSTW-RE 064 Bluetooth Test Set MT8852B-042 6K00005709 Anritsu ETSTW-RE 072 CELL SITE TEST SET 8921A 3339A00375 HP Function Test 2007/7/2 2009/7/1 COPY ETS Product Service (Taiwan) Co., Ltd. Page 10 of 17 Registration number: W6M20708-8430-P-15B 2.4 Test results : 1st test test after modification Test production test Done Test Emission / Immunity Test passed failed Emission Radiated Emission FCC part 15.109 Class B : : Emission Conducted Emission FCC part 15.107 Class B : : COPY Note: According to FCC part 15.109 (g), digital devices may be shown to comply with the standards contained in Third Edition of the International Special Committee on Radio Interference (CISPR), Pub. 22, “Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement”. ETS Product Service (Taiwan) Co., Ltd. Page 11 of 17 Registration number: W6M20708-8430-P-15B 2.4.1 Radiated Emission 2.4.1.1 Test Equipment a) Biconical Antenna (HK116) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-RE 042 b) Log-Periodic Dipole Antenna (HL223) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-RE 043 c) EMI TEST RECEIVER (ESI-26) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-RE 003 d) EMI TEST RECEIVER (ESI 40) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-RE 004 e) Log-Periodic Antenna (HL025) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-RE 017 f) Log-Periodic DipoleArray Antenna (3148) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-RE 028 g) Biconical Antenna (3109) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-RE 029 h) Double-Ridged Waveguide Horm Antenna (3117) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-RE 030 i) Log-Periodic Antenna (HL050) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-RE 044 COPY 2.4.1.2 Test Procedures • Test configuration The test configuration corresponds to the standard CISPR 22. The equipment under test is placed on a non metallic table with 0,8m height. The power supply and the RF connection points are close to the equipment under test at the floor inside a connection box. The cables to this connection box are shielded and below the double floor. The receiving antenna is placed in a height at 1,0 to 4,0m, in a distance of 10m. The measurement receiver are placed in a special room. The observation of the equipment under test is realized by 3 video cameras and by a microphone. • Test parameters and marginal conditions The test are carried out with horizontal and vertical polarization of the antenna in a frequency range of 30 MHz to 1000 MHz . Further information please find in the test protocol. ETS Product Service (Taiwan) Co., Ltd. Page 12 of 17 Registration number: W6M20708-8430-P-15B 2.4.2 2.4.2.1 Conducted Emission Test Equipment a) ZWEILEITER-V-NETZNACHBILDUNG TWO-LINE V-NETWORK (ESH3-Z5) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-CE 004 b) IMPULS-BEGRENZER PULSE LIMITER (ESH3-Z2) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-CE 006 c) EMI TEST RECEIVER (ESHS10) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-CE 001 d) AC Power Source (APS-9102) For your reference please find it in our test equipment list at page 9 to 10 as number : ETSTW-CE 003 • Test configuration The test configuration is contained inside of a shielded chamber and corresponds to the standard CISPR 22. The equipment under test is placed in the facility on a wooden table 0.8m high. The equipment under test is connected with the artificial mains network (AMN) in a distance of 0,8m and also 0,8m from other subassembly and metallic area. The measurement receiver are placed in a special room adjacent to the chamber. The observation of the equipment under test is realized by 3 video cameras and by a microphone. COPY • Test parameters and marginal conditions The test are carried out with a nominal impedance by 50Ω / 50μH of the AMN in a frequency range 150 kHz to 30 MHz. This measurement was transact first with instrumentation using an average and peak detector and a 10 kHz bandwidth. If the peak detector achieves a calculated level, the measurement is repeated by an instrumentation using a quasi-peak detector, Further information please find in test report. ETS Product Service (Taiwan) Co., Ltd. Page 13 of 17 Registration number: W6M20708-8430-P-15B 2.5 Test protocols 2.5.1 Radiated Emission Radio Noise Field Strength Emission Model: UVT100 Mode: Polarization: Horizontal Frequency (MHz) Date: Temperature: Humidity: Reading Factor Detector (dB) (dBuV) 2007/8/28 26 °C 60 % Engineer: Result Limit Margin (dBuV/m) (dBuV/m) (dB) Evan Table Degree (Deg.) 110 120 50 330 90 120 Ant. High (cm) 340 335 310 244 250 229 Table Degree (Deg.) 120 90 320 120 90 0 Ant. High (cm) 120 155 190 285 299 310 COPY 164.128 204.770 287.174 410.160 656.313 779.178 13.09 13.19 20.51 13.68 7.88 10.18 QP QP QP QP QP QP 15.26 12.23 14.98 18.00 22.82 24.82 28.35 25.42 35.49 31.68 30.7 35 30 30 37 37 37 37 -1.65 -4.58 -1.51 -5.32 -6.3 -2 Polarization: Vertical Frequency (MHz) 164.188 246.433 287.555 532.866 716.633 913.026 Note Reading Factor Detector (dBuV) (dB) 8.84 14.77 15.67 12.79 8.98 5.72 peak peak peak peak peak peak 15.25 13.73 14.99 20.36 23.89 26.54 Result Limit Margin (dBuV/m) (dBuV/m) (dB) 24.09 28.5 30.66 33.15 32.87 32.26 30 37 37 37 37 37 -5.91 -8.5 -6.34 -3.85 -4.13 -4.74 1. Correction Factor = Antenna factor + Cable loss - Preamplifier 2. The formula of measured value as: Test Result = Reading + Correction Factor 3. Detector function in the form : PK = Peak, QP = Quasi Peak, AV = Average 4. All not in the table noted test results are more than 20 dB below the relevant limits. 5. See attached diagrams as appendix. ETS Product Service (Taiwan) Co., Ltd. Page 14 of 17 Registration number: W6M20708-8430-P-15B 2.5.2 Conducted Emission Conducted Emission Emission Model: UVT100 Date: 2007/8/21 Mode: Temperature: 26 °C Polarization: N Humidity: 60 % Frequency Reading Factor Result (dBuV) (dB) (dBuV) (MHz) QP Ave. Corr. QP Ave. 0.201 41.17 35.06 10.10 51.27 45.16 0.2659 33.49 27.71 10.10 43.59 37.81 0.333 32.77 29.67 10.10 42.87 39.77 1.805 25.73 23.37 10.10 35.83 33.47 5.1944 10.55 -5.76 10.10 20.65 4.34 19.7719 13.62 -0.73 10.10 23.72 9.37 Engineer: Catey Limit (dBuV) QP Ave. 63.57 53.57 61.25 51.25 59.38 49.38 56 46 60 50 60 50 Margin Limit (dBuV) QP Ave. 63.59 53.59 61.21 51.21 59.3 49.3 57.8 47.8 56 46 60 50 Margin (dB) -8.41 -13.44 -9.61 -12.53 -39.35 -36.28 COPY Polarization: L1 Frequency (MHz) 0.2004 0.267 0.336 0.4026 1.4003 5.4747 Reading (dBuV) QP Ave. 43.3 36.33 35.22 29.09 33.92 30.21 31.07 26.43 26.72 22.48 24.38 21.53 Factor (dB) Corr. 10.10 10.10 10.10 10.10 10.10 10.10 Result (dBuV) QP Ave. 53.4 46.43 45.32 39.19 44.02 40.31 41.17 36.53 36.82 32.58 34.48 31.63 (dB) -7.16 -12.02 -8.99 -11.27 -13.42 -18.37 Note 1. The formula of measured value as: Test Result = Reading + Correction Factor 2. The Correction Factor = Cable Loss + LISN Insertion Loss + Pulse Limit Loss 3. Detector function in the form : PK = Peak, QP = Quasi Peak, AV = Average 4. All not in the table noted test results are more than 20 dB below the relevant limits. 5. See attached diagrams as appendix. ETS Product Service (Taiwan) Co., Ltd. Page 15 of 17 Registration number: W6M20708-8430-P-15B 2.6 Equipment Modification No modification was made to pass all tests. COPY ETS Product Service (Taiwan) Co., Ltd. Page 16 of 17 Registration number: W6M20708-8430-P-15B 3 Normative references /1/ FCC part 15 Radio Frequency Devises /2/ CISPR 22 Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment COPY ETS Product Service (Taiwan) Co., Ltd. Page 17 of 17 Registration number: W6M20708-8430-P-15B Appendix A Measurement diagrams Radiated Emission 1. ( The measurement diagrams plots attached below are preliminary wideband scan with a peak detector and for reference only. The final test results are listed on section 2.5.1) 2. Conducted Emission ( The measurement diagrams plots attached below are preliminary wideband scan with a peak and average detector for reference only. The final test results are listed on section 2.5.2) B COPY Photos 1. 2. 3. 4. External Photos Internal Photos Set Up Photo of Radiated Emission Set Up Photo of Conducted Emission ETS Product Service (Taiwan) Co., Ltd. Appendix page 1 of 12 Registration number: W6M20708-8430-P-15B Radiated Emission Antenna Polarization H COPY ETS Product Service (Taiwan) Co., Ltd. Appendix page 2 of 12 Registration number: W6M20708-8430-P-15B Antenna Polarization V COPY ETS Product Service (Taiwan) Co., Ltd. Appendix page 3 of 12 Registration number: W6M20708-8430-P-15B Conducted Emission LISN N LISN L1 COPY ETS Product Service (Taiwan) Co., Ltd. Appendix page 4 of 12 Registration number: W6M20708-8430-P-15B External Photos COPY ETS Product Service (Taiwan) Co., Ltd. Appendix page 5 of 12 Registration number: W6M20708-8430-P-15B COPY ETS Product Service (Taiwan) Co., Ltd. Appendix page 6 of 12 Registration number: W6M20708-8430-P-15B COPY ETS Product Service (Taiwan) Co., Ltd. Appendix page 7 of 12 Registration number: W6M20708-8430-P-15B Internal Photos COPY ETS Product Service (Taiwan) Co., Ltd. Appendix page 8 of 12 Registration number: W6M20708-8430-P-15B COPY ETS Product Service (Taiwan) Co., Ltd. Appendix page 9 of 12 Registration number: W6M20708-8430-P-15B COPY ETS Product Service (Taiwan) Co., Ltd. Appendix page 10 of 12 Registration number: W6M20708-8430-P-15B Set Up Photo of Radiated Emission COPY ETS Product Service (Taiwan) Co., Ltd. Appendix page 11 of 12 Registration number: W6M20708-8430-P-15B Set Up Photo of Conducted Emission COPY ETS Product Service (Taiwan) Co., Ltd. Appendix page 12 of 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2007:09:05 13:19:48+08:00 Create Date : 2007:09:04 09:30:12+08:00 Metadata Date : 2007:09:05 13:19:48+08:00 Format : application/pdf Title : Microsoft Word - FCC report_CISPR22.doc Creator : Anite Document ID : uuid:9a8d349c-7b73-4e9f-84ef-824026b8755d Instance ID : uuid:13646a1e-22e5-4276-a034-bd6bc098e67c Has XFA : No Page Count : 30 Author : AniteEXIF Metadata provided by EXIF.tools