Catalog Connection Technology For Field Devices 2013 187009

2014-05-16

: Pdf 187009-Catalog 187009-Catalog 012596 Batch3 unilog

Open the PDF directly: View PDF .
Page Count: 468 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Connection Technology

for Field Devices

2013 / 2014

PCB connection technology and electronics housing

• PCB terminal blocks and plug-in connectors

• Electronics housing

Connection technology

for field devices

Sensor/actuator cabling and industrial plug-in connectors

• Sensor/actuator cabling

• Cables and connectors

• Plug-in connectors

Marking systems, tools, and mounting material

• Marking and labeling

•Tools

• Installation and mounting material

Surge protection and power supply units

• Lightning monitoring system

• Surge protection and interference filters

• Power supply units and UPS

• Protective devices

Interface technology and switching devices

• Electronic switching devices and motor control

• Measurement and control technology • Monitoring

• Relay modules • System cabling for controllers

Control technology, I/O systems and automation infrastructure

• Ethernet networks • Functional safety • HMIs and industrial PCs • I/O systems

• Industrial lighting and signaling • Industrial communication technology

• Fieldbus components and systems • Wireless data communication

• Process infrastructure • Software • Controllers

Modular terminal blocks

• Modular terminal blocks

Ta b l e o f c o n t e n t s

Connection technology for field devices from

Phoenix Contact

Universal for signal/data and power transmission

Individual connection solutions

Implement your individual connection for devices and field cabling

with the expertise of Phoenix Contact

Overview - connection technology for field devices

The illustrated table of contents will help you find the right product

more quickly.

PLUSCON 14

Rectangular plug-in connectors

Device plug-in connectors with modular contact system for signals,

power, and fiber optics.

PLUSCON device 19

Data plug-in connectors

Plug-in connectors, flush-type plug-in connectors, and cables for

fieldbuses and networks: D-SUB, RJ45, M8, M12, 7/8", SCRJ, and USB.

PLUSCON data 61

M5 to M12 circular plug-in connectors

Flush-type plug-in connectors and plug-in connectors for assembly

from M5 to M12, for signals, data, and power.

PLUSCON circular 223

M17 to M58 circular plug-in connectors

Flush-type plug-in connectors and plug-in connectors for assembly

from M17 to M58, for signals, data, and power.

PLUSCON circular 303

Photovoltaic plug-in connectors

AC and DC connection systems for photovoltaic modules, inverters,

and micro inverters.

PLUSCON solar 417

Charging plug-in connectors

Plug-in charging systems for electromobility up to 400 A and

plug-in connectors for power electronics up to 150 A.

PLUSCON power 431

Technical information

General information on the degree of protection, properties of

plastics, approvals, insulation coordination, etc.

442

Index 454

Housing

Plastic and aluminum electronics

housing: component housing and panel

mounting bases for industrial electronics,

component housing for building installation,

innovative bus connections between

housing.

See Catalog 1

COMBICON power

Connection technology for power

electronics: PCB terminal blocks and

plug-in connectors for currents up to 125

A, screw and spring-cage connection, panel

feed-throughs. See Catalog 1

COMBICON high density & data

Plug-in connectors in miniature format -

fast insulation displacement, spring, and

pierce connection technology, T-branches

for easy bus connections.

See Catalog 1

COMBICON control

Connection technology for

measurement and control technology and

I/O modules: PCB terminal blocks and

plug-in connectors with 2.54 to 7.62 mm

pitch, screw, spring-cage, and insulation

displacement connection, wave soldering.

See Catalog 1

COMBICON compact

Device connections for building

technology and LED applications: PCB

terminal blocks and plug-in connectors with

2.5 to 7.5 mm pitch, screw and spring-cage

connection as well as pin strips.

See Catalog 1

Connection technology for field devices from

Phoenix Contact

PHOENIX CONTACT

PLUSCON power

Plug-in charging systems for

electromobility up to 400 A and plug-in

connectors for power electronics up to

150 A.

See 431

PLUSCON device

Rectangular plug-in connectors with

modular contact system for signals, power,

and fiber optics with IP67 protection and

available in various sizes.

See 19

PLUSCON data

Plug-in connectors, panel feed-throughs,

and cables for fieldbuses and networks.

See 61

PLUSCON circular

Flush-type plug-in connectors, plug-in

connectors for assembly, and cables from

M5 to M58 for signals, data, and power.

For M5 to M12, see 223

For M17 to M58, see 303

PLUSCON solar

AC and DC connection systems for

photovoltaic modules, inverters, and micro

inverters.

See 417

PHOENIX CONTACT

Connection technology for field devices

from Phoenix Contact

Individual connection solutions

Customer-specific adaptation of

standard products

Found a product in our catalogs that

meets your technical requirements, but

you'd prefer a tailored solution? No

problem – our Solution Center will be

happy to provide you with support in

implementing your requirements. Whether

it's individual colors, special printing, a

specific number of contacts or complete

cable assembly – just let us know what you

want.

PHOENIX CONTACT

Phoenix Contact has been producing

high-quality products for worldwide use

for over 80 years.

Benefit from our extensive

development, manufacturing, and process

expertise for your individual solution.

Together with you, we can transform great

ideas into innovative products.

Intelligent solutions in housing and

connection technology increasingly require

custom concepts.

As a manufacturer, you can develop

products with us that meet the

requirements of today's markets, such as

high quality, individual design, and great

customer benefits at a reasonable price.

You will have the entire expertise of the

Phoenix Contact Group at your disposal.

From our own tool shop and machine

building through plastic injection molding

and metal production to expertise in

electronics production, we offer a depth of

manufacturing that enables us to implement

even demanding projects and complex

products within a short development

period.

Our own laboratory carries out testing

throughout the process, handles the

necessary qualifications and, of course,

international approvals.

As a manufacturer, you can focus on

your core competencies and benefit from

our expertise as specialists in connection

and housing technology.

Great products need great ideas and

experience. Together with the expertise of

Phoenix Contact, you can implement your

individual solution - right from the initial

idea to cost-effective series production.

Our products and services range from

customer-specific PCB connection

technology with screw, spring-cage or IDC

fast connection, in all conceivable designs

and colors...

...through corresponding electronics

housing in special designs in the color and

size of your choice, together with the

appropriate connection technology...

...individual field cabling, with plug-in

connectors with shielding for high data

transmission rates, splash-proof housing for

harsh industrial environments...

...to complete solutions consisting of,

for example, splash-proof housing including

the appropriate connection technology for

signal, data, and power transmission, plus

the ideal PCB connection.

Ideas transformed into innovative products

PHOENIX CONTACT

Qatar

Connection technology for field devices

from Phoenix Contact

Our service –

added value for you

Personal consultation and support

As our customer, you are always the

focus of attention at Phoenix Contact,

whether during consultation or as part of

after sales support. Expert and personal

consultation forms the basis of this

approach. Even though we live in the age of

the Internet, personal interaction with our

customers is of great importance to us.

Reliable delivery service

It goes without saying that our products

are delivered reliably and on time. In

addition to our optimized delivery service,

we offer numerous options for making the

purchasing process more efficient and

transparent.

Phoenix Contact doesn't just offer the

right products, it also provides a

professional service for all aspects of

connection technology for field devices and

field cabling. Wherever you are in the world,

Phoenix Contact's global network means

that you can rely on our service. Being at

home all over the world and speaking the

language of the user is what we understand

by customer proximity. Proximity that

ensures the best service for our partners.

We live up to this with more than 40

customer-oriented subsidiaries and around

30 representatives in other countries.

With warehouses in key industrial

locations throughout the world, we ensure

that you receive your products from

Phoenix Contact cost-effectively and within

the required delivery time.

Our team of highly motivated staff are

available to you at locations around the

world.

PHOENIX CONTACT

Online catalog

The online catalog provides

comprehensive, up-to-date information in

7 languages for more than 22,000 products

from Phoenix Contact. Here you can find

product-specific information such as

technical data, notes on approvals,

dimensional drawings, 3D data, etc.

At the click of the mouse, you can easily

generate a product data sheet in PDF

format.

In over 15 countries, e-shop functions

complete the online catalog. Following

successful registration, you can therefore

access your prices and delivery schedules at

any time and you also have the option of

placing orders directly online.

www.phoenixcontact.net/products Quickly find product-specific information in the

online catalog

Online search assistants

Online search assistants help you to

search systematically and quickly for

products from our extensive range of

plug-in connectors. By selecting electrical

values and other product properties, you

are taken directly to the products that meet

your requirements.

–COMBICON select

PCB connection and electronics housing

–PLUSCON field select

Sensor/actuator cabling

–PLUSCON data select

Data plug-in connectors for fieldbuses

and networks

Easy download of 3D data

User-friendly product search with PLUSCON field select

PHOENIX CONTACT

Fast connection technology

from Phoenix Contact

QUICKON - proven fast connection technology

The secret behind QUICKON at

Phoenix Contact is the tried-and-tested

IDC connection technology. The term

“IDC” stands for Insulation Displacement

Connection - a form of insulation

displacement contacting.

The key advantage is the lack of

conductor preparation, which can save

60 - 80% of the usual connection time

compared to spring-cage or screw

connections.

In the field of automotive engineering,

telecommunications, and household

appliances, this type of fast contacting has

been established for many years, but now

Phoenix Contact has made it suitable for

industrial applications. This includes

contacts which can accommodate both

solid and stranded conductors, which cover

a large range of cross sections, which

penetrate various wire insulations, and

which function reliably and permanently

under harsh industrial conditions.

Advantages of QUICKON

– Time-saving connection

– High degree of reliability thanks to

defined contact force

– Can be connected multiple times using

standard tools

Individual conductors are simply inserted

into the wiring space without preparation

and pushed into the IDC terminal block by

a screw or lever mechanism. Here the wire

insulation is displaced without damaging or

weakening the copper litz wires in any

impermissible way, and a force-defined and

thereby user-independent and gas-tight

contact is established. The contact

resistance values lie between the values for

spring-cage or screw connections.

Notes on IDC fast connection

technology

The specified cross section range must be

observed.

If the conductors are too thin, the

insulation will not be correctly displaced

since the contact gap is too large, and if the

conductors are too thick, it will either not

be possible to connect them at all, or the

system may be damaged as a result of

excessive wiring forces.

QUICKON connections should not be

installed at extremely low or high ambient

temperatures.

Furthermore, the specified wire

insulation must be observed or approved by

Phoenix Contact on request. Extremely

hard insulation materials, such as Teflon, or

very viscoplastic insulation, such as silicone,

can only be wired with IDC contacts

specifically designed for this purpose. Solid

and stranded conductors make very good

contact. In the case of highly stranded

Category 6 conductors, the minimum litz

wire diameter must be observed.

For geometric reasons, two different

types of contact have emerged:

2. Tube contacts cover an even

greater cross section range.

1. Flat contacts are characterized by their

space-saving and cost-effective design.

Screw QUICKON Spring-cage

> 500 N

75 N

40 N

40 75 F [N] 

R [m]

Contact resistance

Contact force

PHOENIX CONTACT

The positive properties and strong

market acceptance of QUICKON have

encouraged Phoenix Contact to develop a

whole range of different products. This

range covers numerous modular terminal

blocks, PCB plugs, industrial plug-in

connectors, and various customer-specific

integrations within a cross section range

from 0.14 mm to 6.0 mm.

Time savings with

QUICKON fast connection

Heavy-duty plug-in connectors

M8 and M12 plug-in connectors

Modular terminal blocks

Special solutions T-distributors RJ45 plug-in connectors

A series plug-in connectors

PCB plug-in connectors

Power distributors

Sensor/actuator boxes

PHOENIX CONTACT

Complete product range

The following pages contain a complete

range of SPEEDCON products, consisting

of molded cables, plug-in connectors for

assembly, flush-type plug-in connectors,

adapters, and passive distributor boxes.

I/O modules with SPEEDCON connection

can be found in the AUTOMATION catalog.

SPEEDCON system partners

A number of well-known and

international companies have been won

over by the advantages and benefits of the

SPEEDCON rapid interlock system and are

now fully reliant on the new standard in the

M12 world.

SPEEDCON is the logical development

of the M12 plug-in connector system that

has been established and accepted for many

years. Following the principle of “Plug &

Turn”, the connection time for M12 plug-in

connectors is reduced by 90%.

The SPEEDCON rapid interlock system is

100% compatible with all M12 connections

available on the market. It goes without

saying that the SPEEDCON plug-in

connectors meet all accepted standards and

requirements for current M12 plug-in

connector systems.

PHOENIX CONTACT

Rapid interlock system

from Phoenix Contact

Fast assembly

Just half a turn and SPEEDCON creates

a perfect plug-in connection. The assembly

time is reduced by 90% as a result.

Compatibility

SPEEDCON is 100% compatible with all

current M12 plug-in connector systems.

The user does not have to learn anything

new, since the “Plug & Turn” principle has

been retained.

Safe operation

SPEEDCON has all the electrical

and mechanical properties required of

conventional M12 plug-in connector

systems.

– Pin assignment, requirements, and testing

according to IEC 61076-2-101

– IP65/IP67/IP69K protection according to

EN 60529

– Vibration and shock resistance according

to IEC 60512-6d

Your advantages of using the SPEEDCON rapid interlock system

Classic – SPEEDCON Insert Temperature

SPEEDCON – Classic 1/2 turn Vibration and shock

SPEEDCON – SPEEDCON Done! Noxious gases

PHOENIX CONTACT

Classic

SPEEDCON

Classic

Screw connection

The screw connection is the most univer-

sal and globally accepted conductor connec-

tion technology. An important characteris-

tic is the maintenance-free conductor

contact. It is not necessary to tighten the

terminal screw again. All kinds of copper ca-

bles can be clamped without pretreatment,

thereby making gas-tight and reliable con-

tact. The wire protector, which protects the

individual litz wires from damage, is located

between the screw and the conductor. It

also performs a screw locking function to

prevent release due to vibrations and tem-

perature fluctuations. Splicing protection

can be implemented in the form of ferrules.

With a screw connection, several wires may

also be clamped under one screw. The cur-

rent-carrying parts of the screw connec-

tions are made of high-grade, strain-crack,

and corrosion-proof copper alloys.

Crimp connection

The crimp connection impresses with its

small space requirements and its cost-effec-

tive creation in series production. For a re-

liable connection, it is essential that the

conductor cross section, the crimp contact,

and the crimping tool are compatible.

Furthermore, the crimping process must be

monitored during large-scale production as

the crimping tools are subject to a certain

degree of wear.

Crimp connections can be established

with the aid of crimping pliers or crimp ma-

chines through specific deformation of the

crimping ranges of the contact. The require-

ments for crimp connections are defined in

DIN EN 60352-2. Proof of the quality of a

crimp connection can be seen in the tensile

strength of the connection and crack-free

deformation of the crimp contact. Crimping

must not result in impermissible elongation

of crimp contacts, as this would prevent

them from latching correctly in the contact

carrier. The contact is released using a con-

tact removal tool. Assembly tools are also

available for very thin conductors.

Axial screw connection

With this method, the wire end to be

contacted is guided into the connection

area of the pin or socket contact. A cone-

shaped prong (part of the contact) is then

screwed into the stranded wire from the

front. The strands of the wire are radially

pressed against the contact wall. This re-

sults in a gas-tight connection with long-

term stability between the wire and con-

tact. It is important that the specified tight-

ening torque is observed. The prong is

pressed in using a hexagon key which is ap-

plied to the front of the contact. This con-

nection technology combines the advantag-

es of screw and crimp connection. It

requires very little space, is easy to execute,

and only requires a standard Allen key.

PHOENIX CONTACT

Connection technology for field devices

Connection solutions from Phoenix Contact

For additional information, visit www.phoenixcontact.net/products

Spring-cage connection

The spring-cage connection contains a

steel spring which pushes the stripped con-

ductor against a power rail. The terminal

point is opened with a standard screwdriver.

After the conductor has been inserted into

the clamping space, the screwdriver is re-

moved and the conductor automatically

makes contact. The contact force is inde-

pendent of the user and a vibration-proof,

gas-tight connection with long-term stabili-

ty is established. The front connection pro-

vides an additional advantage. The conduc-

tor and screwdriver come in parallel from

the same direction and are always within the

user's field of vision. Contact inserts can

thereby also be connected or re-wired even

when mounted. All kinds of copper cables

can be clamped without pretreatment,

thereby making gas-tight and reliable con-

tact. Splicing protection can also be imple-

mented in the form of a ferrule.

Push-in connection

Stranded conductors with ferrules or sol-

id conductors can be quickly and easily in-

serted directly into the connection without

tools. The contact spring is formed in such

a way that it opens automatically when the

conductor is pushed in and thereby pro-

vides the required pressure force against

the current bar for a gas-tight, vibration and

shock-proof connection. With the aid of

the orange pusher, the terminal block can

be opened manually so that conductors

with smaller cross sections can also be se-

curely connected. To release the conductor,

the orange pusher features a confusion-free

and defined operating element. The con-

ductive metals are made from high-grade

copper alloys. All metal parts of the connec-

tion are made of corrosion-resistant mate-

rials.

QUICKON fast connection for

single wires

The QUICKON connection is equipped

with an IDC insulation displacement con-

tact. The term “IDC” stands for Insulation

Displacement Connection. With this con-

nection method, a non-stripped wire with

insulation is positioned in front of the gap of

the insulation displacement contact and

then pushed into the blade gap through in-

sulation displacement. In so doing, the wire

insulation is severed and a gas-tight contact

is made between the wire and the contact.

This can save at least 60% of connection

time.

The connection force is independent of

the user and completely reliable provided

the permitted conductor cross sections and

connection conditions are observed. Solid

and stranded conductors can be rewired up

to 10 times. However, the wire end should

be cut off before connecting again.

QUICKON connections have proven

themselves in numerous applications for

Phoenix Contact over recent years, such as

plug-in connectors, for COMBICON, and

modular terminal blocks to CEE plug-in

equipment from 0.14 to 6.0 mm.

PHOENIX CONTACT

Connection technology for field devices

Connection solutions from Phoenix Contact

PHOENIX CONTACT

Connection technology for field devices

Product range overview

Circular plug-in connectors – PLUSCON device

Panel mounting plug-in connectors

Page 24

Sleeve plug-in connectors

Page 32

Contact carriers and contacts

Page 38

Screw connections and accessories

Page 42

Data plug-in connectors - PLUSCON data

RJ45 plug-in connectors for Industrial

Ethernet with IP20/IP67 protection

Page 78

M12 plug-in connector for Industrial Ethernet

Page 88

Assembled network cables

Page 97

Patch panels, terminal outlets

Page 114

Power plug-in connectors for

network cabling

Page 124

Fiber optic network plug-in connectors

Page 126

Assembled fiber optic cables

Page 138

D-SUB-based fieldbus plug-in connectors

Page 184

M12 flush-type plug-in connectors, plugs,

and cables for fieldbuses

Page 186

Cable range

Page 194

IP20/IP67 USB plug-in connector

Page 205

D-SUB-based plug-in connectors

Page 185

For additional information, visit www.phoenixcontact.net/products

15PHOENIX CONTACT

Connection technology for field devices

Product range overview

M5 - M12 circular plug-in connectors - PLUSCON circular

M5 device plug-in connectors

Front mounting Page 224

Rear mounting Page 224

M8 device plug-in connectors

Front mounting Page 225

Rear mounting Page 226

M12 device plug-in connectors with litz wire

Front mounting Page 232

Rear mounting Page 242

M12 device plug-in connectors with square

flange

Page 236



M12 device plug-in connectors for PCB

mounting, wave soldering processes

Page 246

M12 device plug-in connectors for

PCB mounting, THR

Page 256

7/8" device plug-in connectors with litz wire

Front mounting Page 265

Rear mounting Page 266

M12 device plug-in connectors, stainless

steel design

Page 268

M8 plug-in connectors for assembly with

insulation displacement connection

Page 272

M8 plug-in connectors for assembly with

screw and solder connection

Page 273

M12 plug-in connectors for assembly with

Piercecon

connection

Page 275

M12 plug-in connectors for assembly with

insulation displacement connection

Page 278

M12 plug-in connectors for assembly, screw

and spring-cage connection, shielded and

unshielded

Page 279

7/8" plug-in connectors for assembly with

screw connection

Page 285

M12 power device plug-in connectors

Page 286

M12 power plug-in connectors and cables

for assembly

Page 283

PHOENIX CONTACT

Connection technology for field devices

Product range overview

M17 - M58 circular plug-in connectors - PLUSCON circular

M17 - signal plug-in connectors

Page 308

M23 - signal plug-in connectors

Page 324

M23 - feedback plug-in connectors

Page 340

M17 - power plug-in connectors

Page 352



M23 - power plug-in connectors

Page 368

M40 - power plug-in connectors

Page 380

M58 - power plug-in connectors

Page 390

Signal/power plug-in connectors,

plastic molded

Page 394

Tools and accessories

Page 404

For additional information, visit www.phoenixcontact.net/products

17PHOENIX CONTACT

Connection technology for field devices

Product range overview

Photovoltaic plug-in connectors - PLUSCON solar

SUNCLIX panel feed-throughs and

DC plug-in connectors

Page 420

SUNCLIX assembled cables

Page 425

SUNCLIX mini - plug-in connectors and

module junction boxes

Page 426

Spring-cage terminal blocks for

PCB connection

Page 428

Charging plug-in connector systems - PLUSCON power

Combined AC/DC charging system

Page 435

Type 2 charging cables

Page 436

Type 2 and GB sockets

Page 438

GB charging cables

Page 440

PHOENIX CONTACT

Product range overview 20

System configuration 22

Panel mounting plug-in connectors 

Panel feed-throughs with screw connection 24

Panel feed-throughs with PCB connection 26

Panel feed-throughs with power crimp connection 28

Supporting base elements with screw connection 30

Sleeve plug-in connectors 

Sleeve frames and contact inserts 32

Sleeve housing 34

Contact carriers and contacts 

Fiber optic contact insert modules with screw connection 36

Contact carriers for turned and rolled crimp contacts 38

Crimp contacts 40

Screw connections and accessories 

Full screw connections 42

Half screw connections 44

Protective covers and adapter plates 48

Accessories 49

Hybrid plug-in connectors 52

Derating diagrams and dimensional drawings 54

PHOENIX CONTACT

Direct PCB connection and elimination of

a panel mounting base – these are some of

the outstanding features of the modular,

compact, IP67 plug-in connector system.

This range is particularly suitable for use

in devices, as well as terminal boxes and

control cabinets in harsh industrial environ-

ments. Thanks to the modular structure

and the numerous contact inserts, from

signal to power connections with 70A,

VARIOCON provides proven solutions,

particularly in the field of electrical drive

technology.

The modular contact inserts with screw

and PCB connection form the basis of the

range, in addition to fixed contact inserts

with crimp connection for turned and rolled

contacts. The universal screw connections

feature a high degree of reliability, low con-

tact resistance, and a compact design. The

contact insert modules are consistently

touch proof and can be coded to prevent

incorrect connection. The direct PCB con-

nection saves you a complete jumpering lev-

el and enables controlled and space-saving

device assembly.

Sleeve housing is available in plastic and

seawater-resistant die-cast aluminum. The

robust screw locking prevents the plug-in

connectors from being unintentionally

opened and protects them against mechan-

ical disturbances such as shock and vibra-

tion.

Note:

VDE0100/1.97§411.1.3.2 and

DINEN60204/11.98§14.1.3 are

applicable when combining several circuits

in a cable and/or a plug-in connector.

Rectangular plug-in connectors

VARIOCON is suitable for use in devices,

terminal boxes, and control cabinets.

Thanks to its modular structure and the

variety of contact inserts from fiber optics

to power connections, the range offers vir-

tually unlimited application possibilities.

The range is based on modular contact in-

serts with screw and PCB connection, as

well as fixed contact inserts with crimp con-

nection for turned and rolled contacts. The

variable structure enables the optimum and

therefore inexpensive customization of the

plug-in connector to suit individual applica-

tions.

The advantages Yo u r b e n e f i t s

1. Modularity of the contact inserts and housing – Tailored solution for contact inserts by combining power up

to 70 A, signal up to 40 positions, and fiber optics

– Space savings thanks to compact design

– Free choice of housing designs: plastic, metal, and EMC

protection

2. No panel mounting base required – Reduced assembly time

– IP67 protection with just one housing seal

– Outstanding EMC protection

3. Robust housing screw locking for startup

and servicing

– Resistant to mechanical disturbances (vibration, shock)

– Protected against unintentional opening of the plug-in

connection

– Space savings compared to levers

4. COMBICON screw connection technology – High degree of reliability

– Touch-proof

– Low contact resistance

–Compact design

– Can be coded to prevent incorrect connection

– Can be used universally

5. Direct PCB connection in the device – Jumpering level eliminated

– Controlled assembly by means of soldering-in

– Space-saving installation

6. Power crimp connection – Easiest means of wall mounting by snapping-in

– Cost-effective as no panel mounting frame or panel mounting

flange required

– Controlled factory installation

Six good reasons to use VARIOCON

device plug-in connectors in industrial applications

Housing for direct wall mounting is avail-

able in various versions:

Plastic housing made of tough polyamide

and aluminum housing with seawater-resis-

tant surface and conductive seal. Together

with EMC cable glands, these housings offer

outstanding protection against electromag-

netic interference fields.

PHOENIX CONTACT

Rectangular plug-in connectors

Product range overview

For additional information, visit www.phoenixcontact.net/products

The product range

Modular contact inserts

VARIOCON Modular enables power and

signal transmission to be combined in a sin-

gle plug-in connector.

The contact system is based on the prov-

en COMBICON connection technology

with tension sleeve principle and coding op-

tions. The panel mounting side can be sup-

plied with screw connection or alternatively

with direct PCB connection.

The connection capacity ranges from

4-pos./70 A/690 V to 40-pos./10 A/160 V.

For data transmission, additional fiber

optic modules are available.

Crimp contact carriers

The crimp contact carriers are available as

pin or socket contact carriers and meet the

requirements for high-position plug-in con-

nections.

Turned and rolled crimp contacts from

the proven HEAVYCON D series

(EN 175301-801) are available for 15, 30,

50, and 65-pos. crimp contact carriers, plus

2 leading PE connections each.

All the advantages of crimp technology,

such as machine pre-assembly or partial

assembly, are available with VARIOCON

Crimp.

Sleeve housing and supporting base elements

Sleeve housing is available in plastic and

seawater-resistant die-cast aluminum:

VARIOCON sleeve housing is sealed di-

rectly to the mounting panel with two locking

screws. This locking method saves space, is

easily accessible from above, is vibration-re-

sistant, and meets the requirements of

IP65/IP66/IP67 protection (IP68 on request).

Versions with an easy-grip knurled screw are

available for tool-free attachment.

Accessories

Half cable glands with Pg16 and Pg21

threads are available for VARIOCON hous-

ing. Alternatively, housing is also available

with M20 and M25 threads.

With the VC adapter plates, VARIOCON

plug-in connectors can also be easily used in

standard panel cutouts for heavy-duty in-

dustrial plug-in connectors.

Protective covers protect the contact in-

serts when they are not plugged in.

from page 24

from page 38

from page 31

from page 42

PHOENIX CONTACT

Rectangular plug-in connectors

Product range overview

Modular plug-in connector

The key advantage of VARIOCON plug-

in connectors is that a panel mounting base

with mounting brackets is not required.

The panel mounting plug-in connector is

mounted directly on the device panel as a

panel feed-through without a panel mount-

ing base. Optional contact inserts with

screw connection, crimp connection, and

PCB connection are available. The PCB

versions are available for parallel (180°) and

perpendicular positioning (90°) of the PCB

to the housing panel. The sleeve plug-in

connector consists of sleeve housing,

sleeve contact inserts, and sleeve frame.

Sleeve housing is available in plastic and

seawater-resistant die-cast aluminum. The

aluminum housings have an electrically

conductive seal. In combination with the

EMC cable glands, they possess outstand-

ing shield attenuation. The easy and secure

mounting principle applies to both the

sleeve and housing side. The contact insert

modules are snapped into the frame in the

desired order and then screwed to the

housing or the sleeve.

Contact carriers for turned and rolled contacts

Page 38.

Aluminum sleeve housing

Page 34.

Screw connections

Page 42.

Sleeve frames

Page 33.

Modular contact inserts

from page 32.

Panel mounting frame

Page 25.

Modular contact inserts

from page 24.

Panel mounting flange

Page 25.

PHOENIX CONTACT

Rectangular plug-in connectors

System overview

For additional information, visit www.phoenixcontact.net/products

Rectangular plug-in connector configurator

The VARIOCON Select software enables

rapid and targeted configuration of modular

contact inserts to form a plug-in connector

system. The contact inserts are available

with different numbers of positions and rat-

ed data. They can also be combined in any

order. The modularity of the contact inserts

and housing allow you to configure tailored

combinations of power up to 70 A, signal up

to 40 positions, and fiber optics to form a

modular plug-in connector. There is a

choice of plastic and aluminum housing. In

combination with EMC screw connections,

the aluminum housing offers safe protection

against electromagnetic interference fields.

PHOENIX CONTACT

Rectangular plug-in connectors

System overview

PHOENIX CONTACT

Panel feed-through

with screw connection

Notes:

For dimensional drawings, refer to page 54

For drilling diagrams, see page 55

For accessories, refer to page 50

– One panel mounting frame and two panel

mounting flanges are required for each

connector

– Contact insert sets make logistics easier

– Positions are consecutively marked with

PE and from 1 to n.

– On the panel mounting frame, each

module position is labeled from A-E

Advantages:

– Proven COMBICON technology

– Can be coded to prevent confusion of

connectors

– Suitable for universal connection

–Compact design

Notes:

– The hinged cover on the power contact

inserts must be closed after assembly to

maintain insulation data

– VARIOCON contact insert modules

meet the requirements of DIN EN 61984

(connectors without switching capacity)

– They should, therefore, only be operated

under no load condition

– All inserts are protected against finger

contact according to DIN EN 60529

– They fulfil the requirements of BGV A2

accident prevention regulations

– An insertion bridge EB3-10/ST (Order

No. 5020823) is available for the power

contact insert modules

– The power contact inserts cannot be

used in VC supporting elements for space

reasons

Technical data

VC-AR...S2... VC-AR...S6... VC-AR...S8...

Rated voltage [V] 400 250 160 690 400 250 160 -

Rated current [A]201010 70 201010 -

Connection cross section [mm

] 0.2 ... 4 0.14 ... 1.5 0.14 ... 1.5 0.5 mm² ... 16 mm² 0.2 ... 4 0.14 ... 1.5 0.14 ... 1.5 -

Insertion/withdrawal cycles  100  100  100

Ordering data

Description Design Module

slots

Number of

positions

Incl. PE

Type Order No. Pcs. /

Pkt.

Contact insert set, consisting of: frame, four mounting screws and

pre-assembled 2-pos. modules with screw connection,

six coding profiles

VC1 2 4 VC-AR1/2M-S22-SET 1607298 5

VC2 3 6 VC-AR2/3M-S222-SET 1607311 5

VC3 4 8 VC-AR3/4M-S2222-SET 1607322 5

VC4 5 10 VC-AR4/5M-S22222-SET 1607335 5

Contact insert set, consisting of: frame, four mounting screws and

pre-assembled 6-pos. modules with screw connection,

six coding profiles

VC1 212 VC-AR1/2M-S66-SET 1607346 5

VC2 318 VC-AR2/3M-S666-SET 1607359 5

VC3 424 VC-AR3/4M-S6666-SET 1607370 5

VC4 530 VC-AR4/5M-S66666-SET 1607383 5

Contact insert set, consisting of: frame, four mounting screws and

pre-assembled 8-pos. modules with screw connection,

six coding profiles

VC1 2 16 VC-AR1/2M-S88-SET 1607394 5

VC2 3 24 VC-AR2/3M-S888-SET 1607407 5

VC3 4 32 VC-AR3/4M-S8888-SET 1607418 5

VC4 5 40 VC-AR4/5M-S88888-SET 1607431 5

Power contact insert module, for panel mounting frame,

with screw connection

VC2 3 4

VC3 4 5

VC4 5 7

Contact insert module, marking on screw connection:

PE, 2 1 2

PE, 2 ... 6 1 6

PE, 2 ... 8 1 8

Panel mounting frame, for panel feed-throughs and for

VARIOCON supporting base elements at voltages < 42 V

VC1 2

VC2 3

VC3 4

VC4 5

EMC shield adapter, for EMC connectors

VC1 2

VC2 3

VC3 4

VC4 5

Panel-mounting flange for screw locking, for wall thicknesses of

1-5 mm, 2 pcs. per panel feed-through required, not for supporting

base element

Rectangular plug-in connectors

Panel mounting plug-in connectors

Contact insert sets Power contact insert modules Contact insert modules Panel mounting frame,

For additional information, visit www.phoenixcontact.net/products

25PHOENIX CONTACT

Technical data Technical data Technical data

VC-AMS 2VC-AMS 6VC-AMS 8

Rated voltage [V] 400 250 160 690 400 250 160 -

Rated current [A]201010 70 201010 -

] 0.2 ... 4 0.14 ... 1.5 0.14 ... 1.5 0.5 mm² ... 16 mm² 0.2 ... 4 0.14 ... 1.5 0.14 ... 1.5 -

 500  100  100  100 -

Ordering data Ordering data Ordering data

Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

VC-AMS 4 1607745 5

VC-AMS 5 1607748 5

VC-AMS 7 1607751 5

VC-AMS 2 1853528 50

VC-AMS 6 1854019 50

VC-AMS 8 1854022 50

VC-AMS 2-PE 1583542 50

VC-AMS 6-PE 1583555 50

VC-AMS 8-PE 1583568 50

VC-AR1/2M 1852972 5

VC-AR2/3M 1852985 5

VC-AR3/4M 1852998 5

VC-AR4/5M 1853007 5

VC-AR1-EMV 1853214 5

VC-AR2-EMV 1853227 5

VC-AR3-EMV 1853230 5

VC-AR4-EMV 1853243 5

VC-AF 1852862 50

Rectangular plug-in connectors

Panel mounting plug-in connectors

Contact insert sets Power contact insert modules Contact insert modules Panel mounting frame,

panel mounting flange

Technical data



Rated voltage [V] 690

Rated current [A] 63

Insertion/withdrawal cycles  50

Ordering data

Description Design Module

slots

Number

of positions

Incl. PE

Type Order No. Pcs. /

Pkt.

Power contact insert module

VC2 3 4 VC-AML 4 1607509 10

VC3 4 5 VC-AML 5 1607523 5

VC4 5 7 VC-AML 7 1607537 5

Power contact insert module, with capacitive PE contact

VC2 3 4 VC-AML 4-PEA 1607516 5

VC3/-4 5VC-AML 5-PEA 1607530 5

VC4 7VC-AML 7-PEA 1607544 5

Contact insert module, marking on screw connection:

1 2

1 6

1 8

Panel mounting frame, for panel feed-throughs and for

VARIOCON supporting base elements at voltages < 42 V

VC1 2

VC2 3

VC3 4

VC4 5

EMC shield adapter, for EMC connectors

VC1 2

VC2 3

VC3 4

VC4 5

Panel-mounting flange for screw locking, for wall thicknesses of

1-5 mm, 2 pcs. per panel feed-through required, not for supporting

base element

PHOENIX CONTACT

– One panel mounting frame and two panel

mounting flanges are required for each

connector

– Panel mounting plug-in connector for two

to five contact insert modules

– Module positions are labeled from A - E

Advantages:

– Proven COMBICON technology

– Can be coded to prevent confusion of

connectors

– Direct PCB connection

–Compact design

Notes:

– VARIOCON contact insert modules

meet the requirements of DIN EN 61984

(connectors without switching capacity)

– They should, therefore, only be operated

under no load condition

– All inserts are protected against finger

contact according to DIN EN 60529

– They fulfil the requirements of BGV A2

accident prevention regulations

Panel feed-through

with PCB connection

Rectangular plug-in connectors

Panel mounting plug-in connectors

Notes:

For dimensional drawings, refer to page 54

For drilling diagrams, see page 55

For accessories, refer to page 50

Power contact insert modules 90° Contact insert modules 90° Contact insert modules 180° Panel mounting frame,

For additional information, visit www.phoenixcontact.net/products

Technical data Technical data Technical data

VC-AML 2 VC-AML 6 VC-AML 8 VC-AMLV 2 VC-AMLV 6 VC-AMLV 8

400 250 160 400 250 160 -

20 10 10 20 10 10 -

 100  100  100  100  100  100 -

Ordering data Ordering data Ordering data

Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

VC-AML 2 1852859 50

VC-AML 6 1853531 50

VC-AML 8 1852833 50

VC-AMLV 2 1884979 50

VC-AMLV 6 1884872 50

VC-AMLV 8 1884885 50

VC-AR1/2M 1852972 5

VC-AR2/3M 1852985 5

VC-AR3/4M 1852998 5

VC-AR4/5M 1853007 5

VC-AR1-EMV 1853214 5

VC-AR2-EMV 1853227 5

VC-AR3-EMV 1853230 5

VC-AR4-EMV 1853243 5

VC-AF 1852862 50

27PHOENIX CONTACT

Rectangular plug-in connectors

Panel mounting plug-in connectors

Power contact insert modules 90° Contact insert modules 90° Contact insert modules 180° Panel mounting frame,

panel mounting flange

Technical data



Rated voltage [V] 690

Rated current [A] 70

Insertion/withdrawal cycles  50

Ordering data

Description Design

Number of

positions

Incl. PE

Type Order No. Pcs. /

Pkt.

Contact carriers for pin crimp contacts,

for snapping into mounting panel

VC2 4 VC-AMC 4 1583877 5

VC3 5 VC-AMC 5 1583878 5

Crimp contacts, for conductor cross section:

4 mm²

10 mm²

16 mm²

Crimp contacts, taped, for conductor cross section:

4 mm²

10 mm²

Crimping tool, for crimp contacts

IPCC 16-4... 1

IPCC 16-10... 1

PHOENIX CONTACT

Advantages:

– No need for panel mounting frame

– No need for panel mounting flange

– Simply snap into the VC-AR... panel

cutout and you're done!

– Crimp contacts are released using

flat-bladed screwdriver

Typical applications

– Motors

– Inverter AC output

– Power supplies

Notes:

– VARIOCON contact insert modules

meet the requirements of DIN EN 61984

(connectors without switching capacity)

– They should, therefore, only be operated

under no load condition

– All inserts are protected against finger

contact according to DIN EN 60529

– They fulfil the requirements of BGV A2

accident prevention regulations

– Combination with other VC modules is

not possible

Panel feed-through

with power crimp connection

Rectangular plug-in connectors

Panel mounting plug-in connectors

Notes:

16mm² contacts can only be crimped by machine.

For mounting cutout, see page 56

For accessories, refer to page 50

POWER crimp contact inserts Power crimp contacts Crimping tool

For additional information, visit www.phoenixcontact.net/products

Technical data Technical data

4mm² 10mm² 16mm²

--- -

32 50 60 -

>= 25 >= 25  50 -

Ordering data Ordering data

Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

IPCC 16- 4-MT 1733385 100

IPCC 16-10-MT 1733372 100

IPCC 16-16-MT 1733367 100

IPCC 16- 4-MT BAND 1761467 3800

IPCC 16-10-MT BAND 1761470 2700

CRIMPFOX PCC 16 CS 4QMM 1743427 1

CRIMPFOX PCC 16 CS 10QMM 1743430 1

29PHOENIX CONTACT

Rectangular plug-in connectors

Panel mounting plug-in connectors

POWER crimp contact inserts Power crimp contacts Crimping tool

Technical data Technical data

VC-AMS 2 VC-AMS 6 VC-AMS 8

Rated voltage [V] 400 250 160 -

Rated current [A] 20 10 10 -

Material data

Housing material --- -

Housing surface material - - - -

Degree of protection - - - -

Connection cross section [mm

] 0.2 ... 4 0.14 ... 1.5 0.14 ... 1.5 0.5 mm² ... 4 mm² (for PE conductor) - - -

Insertion/withdrawal cycles  100  100  100 -

Ordering data Ordering data

Description Design Module

slots

Number of

positions

Incl. PE

Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

Contact insert module, marking on screw connection:

12VC-AMS 2 1853528 50

16VC-AMS 6 1854019 50

18VC-AMS 8 1854022 50

Contact insert module, marking on screw connection:

PE, 2 1 2 VC-AMS 2-PE 1583542 50

PE, 2 ... 6 1 6 VC-AMS 6-PE 1583555 50

PE, 2 ... 8 1 8 VC-AMS 8-PE 1583568 50

Panel mounting frame, with PE, for VARIOCON supporting

base elements with voltages > 42 V

VC1 2 VC-AR1/2M-PEA 1607761 1

VC2 3 VC-AR2/3M-PEA 1607774 1

VC3 4 VC-AR3/4M-PEA 1607787 1

VC4 5 VC-AR4/5M-PEA 1607790 1

Housing, metal, powder-coated

VC1 2

VC2 3

VC3 4

VC4 5

Accessories Accessories

Marker labels, unprinted, 5-section, for individual labeling with

B-STIFT or CMS system (25 labels per pack), white

PHOENIX CONTACT

Contact insert modules Panel mounting frames with PE Panel mounting base

– The panel mounting bases are designed

for panel feed-throughs and create space

in the interior of the device.

– Box mounting elements make it possible

for the plug-in wiring to be directly on the

device panel.

– Coupling housings are suitable for free-

hanging connections where jumpering is

necessary in the field.

Notes:

For dimensional drawings, refer to page 54

For drilling diagrams, see page 55

For accessories, refer to page 50

Supporting base elements and

contact inserts with screw connection

Rectangular plug-in connectors

Panel mounting plug-in connectors

For additional information, visit www.phoenixcontact.net/products

Technical data Technical data Technical data

VC-MP-A... VC-MP-S... VC-MP-K...

---

Zinc die-cast Zinc die-cast Zinc die-cast

Powder coating Powder coating Powder coating

IP65/IP66/IP67 IP65/IP66/IP67 IP65/IP66/IP67

] 0.2 ... 4 0.14 ... 1.5 0.14 ... 1.5 0.5 mm² ... 4 mm² (for PE conductor) - - -

---

Ordering data Ordering data Ordering data

Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

VC-MP-A1 1884403 5VC-MP-S1 1884720 5VC-MP-K1 1884568 5

VC-MP-A2 1884416 5VC-MP-S2 1884733 5VC-MP-K2 1884571 5

VC-MP-A3 1884429 5VC-MP-S3 1884746 5VC-MP-K3 1884584 5

VC-MP-A4 1884432 5VC-MP-S4 1884759 5VC-MP-K4 1884597 5

Accessories Accessories Accessories

VC-BZS WH 1852875 5VC-BZS WH 1852875 5VC-BZS WH 1852875 5

31PHOENIX CONTACT

Contact insert modules Panel mounting frames with PE Panel mounting base

with open bottom

Box mounting base

with fixing holes

Coupling housing

with enclosed bottom

Rectangular plug-in connectors

Panel mounting plug-in connectors

PHOENIX CONTACT

Sleeve frames and contact inserts

Notes:

For dimensional drawings, refer to page 54

For accessories, refer to page 50

– Contact insert sets make logistics easier

– Positions are consecutively marked with

PE and from 1 to n.

– On the panel mounting frame, each

module position is labeled from A-E

Advantages:

– Proven COMBICON technology

– Can be coded to prevent confusion of

connectors

– Suitable for universal connection

–Compact design

Notes:

– The hinged cover on the power contact

inserts must be closed after assembly to

maintain insulation data

– VARIOCON contact insert modules

meet the requirements of DIN EN 61984

(connectors without switching capacity)

– They should, therefore, only be operated

under no load condition

– All inserts are protected against finger

contact according to DIN EN 60529

– They fulfil the requirements of BGV A2

accident prevention regulations

– An insertion bridge EB3-10/ST (Order

No. 5020823) is available for the power

contact insert modules

– The power contact inserts cannot be

used in VC supporting elements for space

reasons

Technical data

VC-TR...S2... VC-TR...S6... VC-TR...S8...

Rated voltage [V] 400 250 160 690 400 250 160 -

Rated current [A]201010 70 201010 -

Connection cross section [mm

] 0.2 ... 4 0.14 ... 1.5 0.14 ... 1.5 0.5 mm² ... 16 mm² 0.2 ... 4 0.14 ... 1.5 0.14 ... 1.5 0.5 mm² ... 4 mm² (for PE conductor)

Insertion/withdrawal cycles  100  100  100

Ordering data

Description Design Module

slots

Number of

positions

Incl. PE

Type Order No. Pcs. /

Pkt.

Contact insert set, consisting of: frame, four mounting screws and

pre-assembled 2-pos. modules with screw connection,

six coding profiles

VC1 2 4 VC-TR1/2M-PEA-S22-SET 1607143 5

VC2 3 6 VC-TR2/3M-PEA-S222-SET 1607154 5

VC3 4 8 VC-TR3/4M-PEA-S2222-SET 1607167 5

VC4 5 10 VC-TR4/5M-PEA-S22222-SET 1607178 5

Contact insert set, consisting of: frame, four mounting screws and

pre-assembled 6-pos. modules with screw connection,

six coding profiles

VC1 212 VC-TR1/2M-PEA-S66-SET 1607191 5

VC2 318 VC-TR2/3M-PEA-S666-SET 1607202 5

VC3 424 VC-TR3/4M-PEA-S6666-SET 1607215 5

VC4 530 VC-TR4/5M-PEA-S66666-SET 1607226 5

Contact insert set, consisting of: frame, four mounting screws and

pre-assembled 8-pos. modules with screw connection,

six coding profiles

VC1 2 16 VC-TR1/2M-PEA-S88-SET 1607239 5

VC2 3 24 VC-TR2/3M-PEA-S888-SET 1607250 5

VC3 4 32 VC-TR3/4M-PEA-S8888-SET 1607263 5

VC4 5 40 VC-TR4/5M-PEA-S88888-SET 1607274 5

Sleeve contact insert module, with PE conductor connection

to the metal sleeve housing and integrated sleeve frame

VC2 4

VC3 5

VC4 7

Sleeve contact insert module, with PE conductor connection

to the metal sleeve housing

One extra module VC3 3 4

Two extra modules VC4 3 4

One extra module VC4 4 5

Contact insert module, marking on screw connection:

1 ... 2 1 2

1 ... 6 1 6

1 ... 8 1 8

Contact insert module, marking on screw connection:

PE, 2 1 2

PE, 2 ... 6 1 6

PE, 2 ... 8 1 8

Sleeve frame, with PE, for contact insert modules in metal sleeves

and operating voltages > 42 V

VC1 2

VC2 3

VC3 4

VC4 5

Rectangular plug-in connectors

Sleeve plug-in connectors

Contact insert sets Power contact insert modules Contact insert modules Hood frames with PE

For additional information, visit www.phoenixcontact.net/products

33PHOENIX CONTACT

Technical data Technical data Technical data

VC-TFS 2VC-TFS 6VC-TFS 8

Rated voltage [V] 400 250 160 690 400 250 160 -

Rated current [A]201010 70 201010 -

] 0.2 ... 4 0.14 ... 1.5 0.14 ... 1.5 0.5 mm² ... 16 mm² 0.2 ... 4 0.14 ... 1.5 0.14 ... 1.5 0.5 mm² ... 4 mm² (for PE conductor)

 50  100  100  100 -

Ordering data Ordering data Ordering data

Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

VC-TFS 4-PEA 1607467 5

VC-TFS 5-PEA 1607474 5

VC-TFS 7-PEA 1607481 5

VC-TFS 4/1M-PEA 1607488 5

VC-TFS 4/2M-PEA 1607495 5

VC-TFS 5/1M-PEA 1607502 5

VC-TFS 2 1852846 50

VC-TFS 6 1853476 50

VC-TFS 8 1852820 50

VC-TFS 2-PE 1583513 50

VC-TFS 6-PE 1583526 50

VC-TFS 8-PE 1583536 50

VC-TR1/2M-PEA 1607059 5

VC-TR2/3M-PEA 1607062 5

VC-TR3/4M-PEA 1607075 5

VC-TR4/5M-PEA 1607088 5

Rectangular plug-in connectors

Sleeve plug-in connectors

Contact insert sets Power contact insert modules Contact insert modules Hood frames with PE

PHOENIX CONTACT

Sleeve housing

Notes:

For dimensional drawings, see from page 58

For cable glands, see from page 42

– There is no need for a panel mounting

base with standard panel feed-throughs.

– Seal housing directly to the wall with two

attachment screws.

This screw locking is:

–Space-saving

– Easily accessible from above

– Vibration-resistant

– Conformant with requirements for

protection up to IP69K

– Knurled head screw for fixing without

tools

– Cylinder head screw for operation with

standard bladed screwdriver

Advantages:

– Angled cable outlet so the cable can be

routed as desired, from the side and

straight

– Aluminum housing with extended cabling

space for high-position and power

contact inserts

– This allows space for M32 cable glands

– Housings with two cable inlets are

available

For EMC applications:

–Conductive seals

– Mounting panel must also be conductive

Technical data

Cylinder head locking Knurled head locking Cylinder head locking Knurled head locking Cylinder head locking Knurled head locking Powe

Degree of protection IP65/IP68/IP69K IP65/IP68/IP69K IP65 IP65 IP67 IP67 IP65, IP67, IP68 IP54

Seal material NBR, conductive NBR, conductive EPDM EPDM EPDM EPDM NBR EPDM

Ordering data

Description Design Screw

connection Order No. Pcs. / Pkt. Order No. Pcs. / Pkt.

Cylinder head locking Knurled head locking

Sleeve housing, with metric cable outlet and screw locking

VC1 M20 x 1.5 1583597 51583610 5

VC1 M25 x 1.5 1583607 51583623 5

VC2 M20 x 1.5 1583636 51583652 5

VC2 M25 x 1.5 1583649 51583665 5

VC3 M25 x 1.5 1583678 51583704 5

VC3 M25/M20 x 1.5 1583681 51583717 5

VC3 M32 x 1.5 1583694 51583720 5

VC4 M25 x 1.5 1583733 51583762 5

VC4 M25/M20 x 1.5 1583746 51583775 5

VC4 M32 x 1.5 1583759 51583788 5

Sleeve housing, with metric cable outlet and screw locking

VC1 M20

VC2 M25

VC3 M25

VC4 M25

Sleeve housing , with Pg screw connection gland and

screw locking

VC1 Pg16

VC2 Pg21

VC3 Pg21

VC4 Pg21

Sleeve housing, black, locking screws with Allen screw head,

housing material:

PA VC2 Pg29

PBT VC3 Pg29

Sleeve housing, plastic, locking screws with plus/minus head

VC2 6 x 20.5 mm

VC2 7.5 x 29.5 mm

VC2 6 x 24 mm

VC2 9 x 35 mm

Rectangular plug-in connectors

Sleeve plug-in connectors

Die-cast aluminum sleeve housing

with metric cable outlet

For additional information, visit www.phoenixcontact.net/products

 

PHOENIX CONTACT

Technical data Technical data Technical data

Cylinder head locking Knurled head locking Cylinder head locking Knurled head locking Cylinder head locking Knurled head locking Power sleeve housing Flat-ribbon cable

sleeve housing

Degree of protection IP65/IP68/IP69K IP65/IP68/IP69K IP65 IP65 IP67 IP67 IP65, IP67, IP68 IP54

Seal material NBR, conductive NBR, conductive EPDM EPDM EPDM EPDM NBR EPDM

Ordering data Ordering data Ordering data

Order No. Pcs. / Pkt. Order No. Pcs. / Pkt. Order No. Pcs. / Pkt. Order No. Pcs. / Pkt. Order No. Pcs. / Pkt. Order No. Pcs. / Pkt.

Cylinder head locking Knurled head locking Cylinder head locking Knurled head locking Power sleeve housing Flat-ribbon cable

sleeve housing

1852935 51855097 5

1852948 51855107 5

1852961 51855120 5

1852974 51855133 5

1852930 51855092 5

1852943 51855102 5

1852956 51855115 5

1852969 51855128 5

1583880 1

1424368 1

1607703 10

1607680 10

1607677 10

1607693 10

Rectangular plug-in connectors

Sleeve plug-in connectors

Polyamide sleeve housing

with metric cable outlet

Polyamide sleeve housing,

with Pg screw connection gland

Special types

Technical data



Material data

Contact material Nickel silver

Contact carrier material PA

Inflammability class in acc. with UL 94 V0

Mechanical data

Connection profile F-SMA type 905, IEC 874-2 F-SMA type 905, IEC 874-2 F-SMA type 905, IEC 874-2 F-SMA type 905, IEC 874-2

Torque value knurled screw 0.1 Nm (hand tight)

Connection data

Stripping length [mm] 12

Cable type Polymer fiber (980 / 1000 µm) Polymer fiber (980 / 1000 µm

Insertion/withdrawal cycles > 100

Attenuation < 3 dB

Temperature data

Ambient temperature (operation) -20 °C ... 70 °C

Ordering data

Description Type Order No. Pcs. /

Pkt.

Contact insert module, for sleeve frames

VC-TFOS 2 1855814 10

Contact insert module, for panel mounting frames for

accommodating VC-FSMA-M ... quick mounting connectors

FSMA connector, for polymer fiber cable, for contact carrier

module VC-AFOS 2, (2 pcs. each as set)

FSMA connector set, with bend protection sleeve for polymer

fiber cable, for contact carrier module VC-AFOS 2,

(2 pcs. each as set)

Accessories

Stripping tool for FO cables PSM-FO-STRIP 2744199 1

Polisher, metal, for repeated preparation of VARIOCON fiber optic

ferrules

VC-POLISHER/M FSMA 1884982 1

Polymer fiber polishing set for quick mounting connectors,

comprising polishing pads and polishing disks

PSM-SET-FSMA-POLISH 2799348 1

PHOENIX CONTACT

FO contact insert modules

with screw connection

The fiber optic modules of VARIOCON

enable optical signal transmission over dis-

tances of up to 50 m by using polymer fiber

optic cables.

Quick-assembly on the connector side

and passive panel feed-through make assem-

bly possible in 2 minutes, even in the field.

The single core is stripped, fixed in the

ferrule with the knurled screw and then

polished for the optical connection.

Coding:

The FO contact insert modules can be ad-

ditionally protected against incorrect plug-

ging with the red CP-HCC 4 coding profiles

(Order No. 1600027).

Instructions for the fiber optic module

– Do not exceed the permissible bending

radii for fiber optics

– Follow the instructions on the package

slip when handling individual conductors

– Using a passive coupling reduces the

transmission range by approx. 10m

Rectangular plug-in connectors

Contact carriers and contacts

Notes:

Other fiber optic accessories and cables can be found

from page 126

Contact insert module ferrules

with F-SMA screw connection

For additional information, visit www.phoenixcontact.net/products



Technical data Technical data Technical data

Nickel silver Nickel silver Nickel silver

PA - -

V0 - -

Connection profile F-SMA type 905, IEC 874-2 F-SMA type 905, IEC 874-2 F-SMA type 905, IEC 874-2 F-SMA type 905, IEC 874-2

0.1 Nm (hand tight) 0.1 Nm (hand tight) 0.1 Nm (hand tight)

12 12 -

Cable type Polymer fiber (980 / 1000 µm) Polymer fiber (980 / 1000 µm) Polymer fiber (980 / 1000 µm) Polymer fiber (980 / 1000 µm)

> 100 > 100 > 100

< 3 dB < 3 dB < 3 dB

-20 °C ... 70 °C -20 °C ... 70 °C -20 °C ... 70 °C

Ordering data Ordering data Ordering data

Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

VC-AFOS 2 1885240 10

VC-FSMA-M-2 SET 1855432 1

VC-FSMA-M-KT-2 SET 1855703 1

Accessories Accessories Accessories

PSM-FO-STRIP 2744199 1PSM-FO-STRIP 2744199 1

VC-POLISHER/M FSMA 1884982 1VC-POLISHER/M FSMA 1884982 1

PSM-SET-FSMA-POLISH 2799348 1PSM-SET-FSMA-POLISH 2799348 1

37PHOENIX CONTACT

Rectangular plug-in connectors

Contact carriers and contacts

Mounting contact insert F-SMA quick mounting plug

for polymer fiber cables

F-SMA quick mounting plug

for polymer fiber cables

a+6

34,5

Ø4,3/M4

Ø3,5





Technical data



Electrical data in acc. with IEC 61076-2-101

Rated voltage [V] 250

Rated surge voltage [kV] 4

Rated current [A] 10

Surge voltage category / pollution degree III / 2

Material data

Contact carrier material PA-GF

Connection data

Stripping length [mm] 8

Connection cross section [mm

] 0.14 mm² ... 1.5 mm² (stranded) 0.14 mm² ... 1.5 mm² (stranded) 0.14 mm² ... 1.5 mm² (stranded)

Connection cross section AWG 22 ... 16

Temperature data

Ambient temperature (operation) -40 °C ... 125 °C

Ordering data

Description Design

Number of

positions

Incl. PE

Type Order No. Pcs. /

Pkt.

Contact carrier, with four ST 2,9 fastening screws

VC1 15 VC-D1-ST15-PE 1855018 10

VC2 30 VC-D2-ST30-PE 1855021 10

VC3 50 VC-D3-ST50-PE 1855034 10

VC4 65 VC-D4-ST65-PE 1855047 10

Mounting flange, to screw the contact insert to the housing panel

VC-D-AF 1855319 20

Coding pins, with ST2,9 thread for sleeve housings, to prevent

identical plug-in connectors from being confused

VC-CB-T 1607884 10

Coding pins, with M3 thread for VC panel mounting bases,

to prevent identical plug-in connectors from being confused

VC-CB-A 1607888 10

PHOENIX CONTACT

VC-D...-ST...-PE

Design Number of

positions

[mm]

VC 1 15 42.8 31.5 40.0

VC 2 30 57.8 46.5 55.0

VC 3 50 72.8 61.5 70.0

VC 4 65 87.8 76.5 85.0

Dimensions table Mounting cutout for VC-D...-PE

Contact carriers for turned

and rolled crimp contacts

– 15, 30, 50, and 65 positions are available,

in accordance with housing sizes

VC 1 - VC 4

– Pin and socket contacts can be used

on both the connector and device sides

– Contact carriers additionally have two

pre-mating protective ground contacts

– Connection data is 250 V/10 A and corre-

sponds to that of the HEAVYCON DD

series.

– Use of turned and even rolled contacts

– Contact types meet the requirements of

IEC 60352/DIN EN 60352

Safety note:

– PE conductor must always be connected

to the directly opposite positions

– Connectors may only be operated when

not under load.

Rectangular plug-in connectors

Contact carriers and contacts

Pin contact carrier

for turned and rolled contacts

a+6

25,4

a+6

25,4

For additional information, visit www.phoenixcontact.net/products

  

Technical data Technical data

250 250

10 10

III / 2 III / 2

PA-GF PA-GF

] 0.14 mm² ... 1.5 mm² (stranded) 0.14 mm² ... 1.5 mm² (stranded) 0.14 mm² ... 1.5 mm² (stranded)

22 ... 16 22 ... 16

-40 °C ... 125 °C -40 °C ... 125 °C

Ordering data Ordering data

Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

VC-D1-BU15-PE 1855050 10 VC-D1-BU15-PE-R 1884801 10

VC-D2-BU30-PE 1855063 10 VC-D2-BU30-PE-R 1884791 10

VC-D3-BU50-PE 1855076 10 VC-D3-BU50-PE-R 1884788 10

VC-D4-BU65-PE 1855089 10 VC-D4-BU65-PE-R 1884775 10

VC-D-AF 1855319 20 VC-D-AF 1855319 20

VC-CB-T 1607884 10 VC-CB-T 1607884 10

VC-CB-A 1607888 10 VC-CB-A 1607888 10

39PHOENIX CONTACT

VC-D...-BU-PE VC-D...-BU...-PE-R

Rectangular plug-in connectors

Contact carriers and contacts

Socket contact carrier,

for turned contacts

Socket carrier,

for rolled contacts



  

Technical data Technical data

Material data Hard silver-plated Hard gold-plated CK1,6-BR-0,5... CK1,6-BR-1,5...

Contact material Copper alloy Copper alloy Copper alloy Copper alloy Copper alloy Copper alloy Nickel silver

Stripping length of the individual wire 8 mm (6 mm in case of 2.5 mm

) 8 mm (6 mm in case of 2.5 mm

) 3 mm +1 3.5 mm +1 3 mm +0.5 3.5 mm +1 -

Insertion/withdrawal cycles  500  500  500  500

Ambient temperature (operation) -40 °C ... 125 °C -40 °C ... 125 °C -40 °C ... 125 °C -40 °C ... 125 °C -40 °C ... 125 °C -40 °C ...

Ordering data Ordering data

Description Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

Turned socket contacts, silver-plated contact surface,

for conductor cross section:

0.14 mm

... 0.37 mm

/26 ... 22 AWG CK1,6-ED-0,37BU AG 1663394 100

0.50 mm

/ AWG 20 CK1,6-ED-0,50BU AG 1663404 100

0.75 mm

/ AWG 18 CK1,6-ED-0,75BU AG 1663417 100

0.75 mm

... 1.00 mm

/ AWG 18 CK1,6-ED-1,00BU AG 1663420 100

1.50 mm

/ AWG 16 CK1,6-ED-1,50BU AG 1663433 100

2.50 mm

/ AWG 14 CK1,6-ED-2,50BU AG 1663446 100

Turned pin contacts, silver-plated contact surface,

for conductor cross section:

0.14 mm

... 0.37 mm

/ AWG 26 ... 22 CK1,6-ED-0,37ST AG 1663336 100

0.50 mm

/ AWG 20 CK1,6-ED-0,50ST AG 1663349 100

0.75 mm

/ AWG 18 CK1,6-ED-0,75ST AG 1663352 100

0.75 mm

... 1.00 mm

/ AWG 18 CK1,6-ED-1,00ST AG 1663365 100

1.50 mm

/ AWG 16 CK1,6-ED-1,50ST AG 1663378 100

2.50 mm

/ AWG 14 CK1,6-ED-2,50ST AG 1663381 100

Turned socket contacts, gold-plated contact surface,

for conductor cross section:

0.14 mm

... 0.37 mm

/26 ... 22 AWG CK1,6-ED-0,37BU AU 1674969 100

0.50 mm

/ AWG 20 CK1,6-ED-0,50BU AU 1674480 100

0.75 mm

/ AWG 18 CK1,6-ED-0,75BU AU 1672440 100

0.75 mm

... 1.00 mm

/ AWG 18 CK1,6-ED-1,00BU AU 1674943 100

1.50 mm

/ AWG 16 CK1,6-ED-1,50BU AU 1674930 100

2.50 mm

/ AWG 14 CK1,6-ED-2,50BU AU 1674985 100

Turned pin contacts, gold-plated contact surface,

for conductor cross section:

0.14 mm

... 0.37 mm

/ AWG 26 ... 22 CK1,6-ED-0,37ST AU 1674901 100

0.50 mm

/ AWG 20 CK1,6-ED-0,50ST AU 1672453 100

0.75 mm

/ AWG 18 CK1,6-ED-0,75ST AU 1674914 100

0.75 mm

... 1.00 mm

/ AWG 18 CK1,6-ED-1,00ST AU 1674888 100

1.50 mm

/ AWG 16 CK1,6-ED-1,50ST AU 1674875 100

2.50 mm

/ AWG 14 CK1,6-ED-2,50ST AU 1674927 100

Rolled pin contacts, silver-plated contact surface,

for conductor cross section:

0.14 mm

... 0.50 mm

/ AWG 26 ... 20 CK1,6-BR-0,50ST AG 1884157 2000

0.50 mm

... 1.50 mm

/ AWG 20 ... 16 CK1,6-BR-1,50ST AG 1884144 2000

Rolled socket contacts, silver-plated contact surface,

for conductor cross section:

0.14 mm

... 0.50 mm

/ AWG 26 ... 20 CK1,6-BR-0,50BU AG 1884186 2000

0.50 mm

... 1.50 mm

/ AWG 20 ... 16 CK1,6-BR-1,50BU AG 1884173 2000

POF fiber optic contact, turned, for VC-D contact carriers

Socket

Plug

PHOENIX CONTACT

Turned crimp contacts,

Ø 1.6 mm, for VC-D contact carriers

Rolled crimp contacts, taped,

Ø 1.6 mm, for VC-D...R contact carriers,

contact entry from left

The quality of a crimp connection is spec-

ified in DIN EN 60352 Part 2. The single

most important criterion for the reliability

of a crimp connection is the holding force of

the litz wires in the crimp contact.

DIN EN 60352-2 describes the extraction

force of the cores from the crimp contact in

relation to the conductor cross section.

Notes:

For voltages less than 5 V and currents less than 5 mA, gold-plated

contacts are recommended.

Crimping pliers can be found in Catalog 4, in the “Heavy-duty plug-

in connectors” section.

Crimp contacts

Rectangular plug-in connectors

Contact carriers and contacts

For additional information, visit www.phoenixcontact.net/products

  

Technical data Technical data

CK1,6-ER-0,5... CK1,6-ER-1,5...

y Copper alloy Copper alloy Copper alloy Nickel silver

) 3 mm +1 3.5 mm +1 3 mm +0.5 3.5 mm +1 -

 500  500  500

Ambient temperature (operation) -40 °C ... 125 °C -40 °C ... 125 °C -40 °C ... 125 °C -40 °C ... 125 °C -40 °C ... 125 °C -40 °C ... 125 °C -

Ordering data Ordering data

Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

CK1,6-ER-0,50ST AG 1884092 100

CK1,6-ER-1,50ST AG 1884089 100

CK1,6-ER-0,50BU AG 1884128 100

CK1,6-ER-1,50BU AG 1884115 100

CK1,6-ED-BU-POF 1885004 50

CK1,6-ED-ST-POF 1884995 50

41PHOENIX CONTACT

Rolled crimp contacts, single contacts,

Ø 1.6 mm, for VC-D...R contact carriers

Crimp contacts for fiber optic cables,

polymer fibers (POF)

Rectangular plug-in connectors

Contact carriers and contacts



PHOENIX CONTACT

Plastic cable screw connections are easy

to install and cover a wide range of conduc-

tor diameters, thanks to the clamping cage

principle combined with excellent strain re-

lief. They are suitable for universal applica-

tion in mechanical and plant engineering, in

measuring and control technology, in auto-

mation and electrical engineering and in

robot construction.

– Full screw connection for use in housing

with thread

– High strain relief forces and high cable

diameter ranges thanks to clamping cage

principle

– Brass screw connections for especially

high demands in terms of stability and

safety

– EMC screw connections offer an easy way

of connecting shielded cables

– Easy to assemble thanks to highly elastic

contact springs

– AS-Interface screw connections are

available for inserting AS-Interface cables

Full cable glands

Technical data

Material data

Cable gland material Polyamide

Material, insert -

Seal material Neoprene

Material, O-ring -

Inflammability class according to UL 94 V2

Mechanical data

Degree of protection IP68, to 5 bar

Temperature data

Ambient temperature (operation) -20 °C ... 100 °C

Ordering data

Description Thread type Type Order No. Pcs. /

Pkt.

Plastic gland, gray,

for cable diameter [mm]:

8 mm ... 13 mm M20 HC-K-KV-M20(8-13) 1690626 25

11 mm ... 17 mm M25 HC-K-KV-M25(11-17) 1690639 25

15 mm ... 21 mm M32 HC-K-KV-M32(15-21) 1690642 10

Metal gland,

for conductor diameter [mm]:

9 mm ... 13 mm M20

11 mm ... 16 mm M20

11 mm ... 16 mm M25

14 mm ... 21 mm M25

14 mm ... 21 mm M32

19 mm ... 27 mm M32

EMC screw connection,

for conductor diameter [mm]:

7 mm ... 12.5 mm M20

9 mm ... 16.5 mm M25

11 mm ... 21 mm M32

Metal gland,

for AS-Interface flat-ribbon conductor

Thread type: M20 M20

Thread type: M25 M25

Special cable screw connection M25, brass

With 10 mm and 11 mm hole M25

Rectangular plug-in connectors

Screw connections and accessories

Plastic gland Metal gland EMC gland

For additional information, visit www.phoenixcontact.net/products

Dimensions

[mm]

Thread

Type B C M D

HC-K-KV-M20... 8 13.5 20 24

HC-K-KV-M25... 817.5 25 29

HC-K-KV-M32... 10 21.5 32 36

Dimensional drawing: HC-K-KV-M...

Dimensions

[mm]

Thread

Type B C M D

HC-M-KV-M20(9-13) 6 13.3 20 22

HC-M-KV-M20(11-16 616.2 20 27

HC-M-KV-M25(11-16) 7 17.3 25 27

HC-M-KV-M25(14-21) 721.2 25 34

HC-M-KV-M32(14-21) 8 21.3 32 34

HC-M-KV-M32(19-27) 827.5 32 43

HC-M-KV-M20(1ASI) 6 - 20 22

HC-M-KV-M25(1ASI) 7 - 25 27

HC-M-KV-M25(1X10X11)

7 - 25 34

Dimensional drawing: HC-M-KV-M...

Dimensions

[mm]

Type B C M MS

HC-EMV-KV-M20... 8 12.5 20 5 24

HC-EMV-KV-M25... 816.5 25 7.5 29

HC-EMV-KV-M32... 9 21.0 32 9 36

Minimum shield diameter

Dimensional drawing: HC-EMV-KV-M...





PHOENIX CONTACT

Technical data Technical data

Nickel-plated brass Nickel-plated brass Nickel-plated brass

PA PA PA

Neoprene TPE Neoprene

NBR NBR NBR

-- -

IP68, to 5 bar IP65 IP68, to 5 bar

-20 °C ... 100 °C -20 °C ... 100 °C -20 °C ... 100 °C

Ordering data Ordering data

Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

HC-M-KV-M20(9-13) 1690561 25

HC-M-KV-M20(11-16) 1645998 25

HC-M-KV-M25(11-16) 1690574 25

HC-M-KV-M25(14-21) 1646007 25

HC-M-KV-M32(14-21) 1690587 10

HC-M-KV-M32(19-27) 1646010 10

HC-EMV-KV-M20(7-12,5) 1690503 25

HC-EMV-KV-M25(9-16,5) 1690516 25

HC-EMV-KV-M32(11-21) 1690529 25

HC-M-KV-M20(1ASI) 1584017 10

HC-M-KV-M25(1ASI) 1584020 10

HC-M-KV-M25(1X10/1X11) 1580228 10

Rectangular plug-in connectors

Screw connections and accessories

Plastic gland Metal gland EMC gland

PG16

M25x1,5

SW28 SW27

PG16

M25x1,5

2428



Technical data Technical data



Material data

Sealing material TPE TPE

Cable gland material - -

Material, pressure screw Polyamide Nickel-plated brass

Degree of protection IP67 IP67

Torque [Nm] 5.00 7.50

Ambient temperature (operation) -20 °C ... 100 °C -40 °C ... 125 °C

Ordering data Ordering data

Description Cable Ø [mm] Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

Cable screw connection gland, for adapting the Pg half screw

connections to metric cable entry, M25

VC-M-KV-PG16/M25 ST 1644407 10 VC-M-KV-PG16/M25 ST 1644407 10

Half screw connection Pg16, consisting of rubber seal with

a hole and a pressure screw, for type VC1 housing

4 ... 6.5 VC-K-KV-PG16( 4- 6,5) 1854459 5VC-M-KV-PG16( 4- 6,5) 1853942 5

5 ... 8 VC-K-KV-PG16( 5- 8) 1853735 5VC-M-KV-PG16( 5- 8) 1853955 5

6,5 ... 9.5 VC-K-KV-PG16( 6,5- 9,5) 1853748 5VC-M-KV-PG16( 6,5- 9,5) 1853968 5

7 ... 10.5 VC-K-KV-PG16( 7-10,5) 1853751 5VC-M-KV-PG16( 7-10,5) 1853971 5

9 ... 13 VC-K-KV-PG16( 9-13) 1853764 5VC-M-KV-PG16( 9-13) 1853984 5

11,5 ... 15.5 VC-K-KV-PG16(11,5-15,5) 1854844 5VC-M-KV-PG16(11,5-15,5) 1854857 5

Elongated hole 7 x 14 VC-K-KV-PG16 7/14 1607664 5VC-M-KV-PG16 2X6/1X7 1885512 5

3 x 7 VC-K-KV-PG16 3X7 1885444 5VC-M-KV-PG16 3X7 1885525 5

EMC half screw connection Pg16, for metal housing,

consisting of rubber seal, iris spring, cone disc and pressure screw,

for type VC1 housing, shield diameter:

6.5 mm 6.5 ... 9.5 VC-EMV-KV-PG16( 6,5- 9,5/ 6,5) 1854132 1

8.5 mm 7 ... 10.5 VC-EMV-KV-PG16( 7-10,5/ 8,5) 1854161 1

10.5 mm 9 ... 13 VC-EMV-KV-PG16( 9-13/10,5) 1854174 1

Closing cap, for closing unused bore holes in multiple seals

and cable glands

Ø 3 mm SEALING PLUG 3X12 RD 1400238 10 SEALING PLUG 3X12 RD 1400238 10

Ø 5 mm SEALING PLUG 5X12 RD 1400253 10 SEALING PLUG 5X12 RD 1400253 10

Ø 6 mm SEALING PLUG 6X16 RD 1400254 10 SEALING PLUG 6X16 RD 1400254 10

Ø 7 mm SEALING PLUG 7X16 RD 1400255 10 SEALING PLUG 7X16 RD 1400255 10

Ø 8 mm SEALING PLUG 8X16 RD 1400257 10 SEALING PLUG 8X16 RD 1400257 10

Ø 12 mm SEALING PLUG 12X22 RD 1400260 10 SEALING PLUG 12X22 RD 1400260 10

VC-M-KV-PG16/M25 ST / VC-K-KV-PG16... VC-M-KV-PG16/M25 ST / VC-M-KV-PG16...

PHOENIX CONTACT

Rectangular plug-in connectors

Screw connections and accessories

Screw connection

with plastic pressure screw

Screw connection

with brass pressure screw,

EMC screw connections with iris spring

Pg16 cable glands for one cable

M32x1,5

PG21

35 33

M32x1,5

PG21

35 30

For additional information, visit www.phoenixcontact.net/products



Technical data Technical data



Material data

Sealing material TPE TPE

Cable gland material - -

Material, pressure screw Polyamide Nickel-plated brass

Degree of protection IP67 IP67

Torque [Nm] 7.50 10.00

Ambient temperature (operation) -20 °C ... 100 °C -40 °C ... 125 °C

Ordering data Ordering data

Description Cable Ø [mm] Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

Cable screw connection gland, for adapting the Pg half screw

connections to metric cable entry, M32

VC-M-KV-PG21/M32 ST 1644397 10 VC-M-KV-PG21/M32 ST 1644397 10

Half screw connection Pg21, consisting of rubber seal with

a hole and a pressure screw, for type VC2 ... VC4 housing

7 ... 10.5 VC-K-KV-PG21( 7-10,5) 1853890 5VC-M-KV-PG21( 7-10,5) 1853997 5

9 ... 13 VC-K-KV-PG21( 9-13) 1853900 5VC-M-KV-PG21( 9-13) 1854006 5

11.5 ... 15.5 VC-K-KV-PG21(11,5-15,5) 1853913 5VC-M-KV-PG21(11,5-15,5) 1854035 5

14 ... 18 VC-K-KV-PG21(14-18) 1853926 5VC-M-KV-PG21(14-18) 1854048 5

17 ... 20.5 VC-K-KV-PG21(17-20,5) 1853939 5VC-M-KV-PG21(17-20,5) 1854051 5

Elongated hole 20 x 7 VC-K-KV-PG21(20X7) 1885198 5VC-M-KV-PG21(20X 7) 1885305 5

EMC half screw connection Pg21, for metal housing,

consisting of rubber seal, iris spring, cone disc and pressure screw,

for type VC2 ... VC4 housing, shield diameter:

9.5 mm 9 ... 13 VC-EMV-KV-PG21( 9-13/ 9,5) 1854200 1

12 mm 9 ... 13 VC-EMV-KV-PG21( 9-13/12) 1854213 1

13.5 mm 11.5 ... 15.5 VC-EMV-KV-PG21(11,5-15,5/13,5) 1854242 1

14.5 mm 14 ... 18 VC-EMV-KV-PG21(14-18/14,5) 1854255 1

Dummy screw connection, rubber seal without hole

VC-K-KV-PG21-O 1885363 5VC-M-KV-PG21- 0 1854983 5

Closing cap, for closing unused bore holes in multiple seals

and cable glands

Ø 3 mm SEALING PLUG 3X12 RD 1400238 10 SEALING PLUG 3X12 RD 1400238 10

Ø 5 mm SEALING PLUG 5X12 RD 1400253 10 SEALING PLUG 5X12 RD 1400253 10

Ø 6 mm SEALING PLUG 6X16 RD 1400254 10 SEALING PLUG 6X16 RD 1400254 10

Ø 7 mm SEALING PLUG 7X16 RD 1400255 10 SEALING PLUG 7X16 RD 1400255 10

Ø 8 mm SEALING PLUG 8X16 RD 1400257 10 SEALING PLUG 8X16 RD 1400257 10

Ø 12 mm SEALING PLUG 12X22 RD 1400260 10 SEALING PLUG 12X22 RD 1400260 10

Ø 13 mm SEALING PLUG 13X22 RD 1400265 10 SEALING PLUG 13X22 RD 1400265 10

VC-M-KV-PG21/M32 ST / VC-K-KV-PG21... VC-M-KV-PG21/M32 ST / VC-M-KV-PG21...

PHOENIX CONTACT

Rectangular plug-in connectors

Screw connections and accessories

Screw connection

with plastic pressure screw

Screw connection

with brass pressure screw,

EMC screw connections with iris spring

Pg21 cable glands for one cable

PG16

M25x1,5

SW28 SW27

PG16

M25x1,5

2428



Technical data Technical data

VC-K-KV.../... VC-M-KV...ST VC-M-KV.../... VC-M-KV...ST

Material data

Material - Brass, nickel-plated Brass, nickel-plated Brass, nickel-plated

Sealing material TPE - TPE -

Material, O-ring - NBR - NBR

Degree of protection IP65 - IP65 -

Temperature data

Ambient temperature (operation) -20 °C ... 100 °C - -40 °C ... 125 °C -

Ordering data Ordering data

Description Cable Ø [mm] Type Order No. Pcs. /

Pkt. Type Order No. Pcs. /

Pkt.

Cable screw connection gland, for adapting the Pg half screw

connections to metric cable entry, M25

VC-M-KV-PG16/M25 ST 1644407 10 VC-M-KV-PG16/M25 ST 1644407 10

Half screw connection Pg16, consisting of rubber seal with

several holes and a pressure screw, for type VC1 housing

and HEAVYCON, further types upon request

1 x 3 / 1 x 8 VC-K-KV-PG16 1X3/1X8 1885376 5VC-M-KV-PG16 1X3/1X8 1885457 5

1 x 3 / 1 x 9 VC-K-KV-PG16 1X3/1X9 1885389 5VC-M-KV-PG16 1X3/1X9 1885460 5

1 x 6 / 1 x 8 VC-K-KV-PG16 1X6/1X8 1885392 5VC-M-KV-PG16 1X6/1X8 1885473 5

1 x 5 / 1 x 9 VC-K-KV-PG16 1X5/1X9 1885402 5VC-M-KV-PG16 1X5/1X9 1885486 5

1 x 3 / 2 x 8 VC-K-KV-PG16 1X3/2X8 1885415 5VC-M-KV-PG16 1X3/2X8 1885499 5

1 x 5 / 2 x 6 VC-K-KV-PG16 1X5/2X6 1885428 5VC-M-KV-PG16 1X5/2X6 1885509 5

2 x 6 / 1 x 7 VC-K-KV-PG16 2X6/1X7 1885431 5VC-M-KV-PG16 2X6/1X7 1885512 5