Phoenix Contact 24142 Catalog
2014-05-16
: Pdf 24142-Catalog 24142-Catalog 012596 Batch3 unilog
Open the PDF directly: View PDF 
.
Page Count: 31
- Modular Terminal Blocks
- Micro Terminal Blocks
- 2771146
- 443023
- 444019
- 3006027
- 2771023
- 3104013
- Mini Terminal Blocks
- Universal Terminal Blocks
- UNIVERSAL DOUBLE LEVEL TERMINAL BLOCKS
- 3 and 4-level Terminal Blocks
- Special Terminal Blocks/Special Connections
- Terminal Blocks for Fuse and Component Plugs
- Fused and Component Plugs
- Component Terminal Block
- Side Link Disconnect Terminal Blocks
- KNIFE DISCONNECT TERMINAL BLOCKS
- CLIPLINE Modular Terminal Blocks
- CLIPLINE Spring Cage Terminal Blocks
- Spring Cage Feed Through Terminal Blocks
- Spring Cage Knife Disconnect Terminal Blocks
- Spring Cage Initiator/Actuator Terminal Blocks
- Spring Cage Fuse Terminal Blocks with Disconnect Lever
- Accessories For Terminal Blocks
- Printed Circuit Terminal Blocks
- COMBICON Plug-In Connectors
- COMBICON Plugs and Headers
- Interface Terminal Blocks
- Interface Modules
- Isolation Amplifiers and Power Supply Units
- Instrumentation Products
- Universal Isolator/Converter
- MCR Loop-Powered Isolator with Selectable Input
- MCR Loop-Powered Isolator
- MCR Programmable Temperature Transducers for RTDs and Thermocouples
- MCR Temperature Transducers
- Data Interface Converters and Isolators
- SUBCON Field Bus Connectors
- Varioface Modules for Solid-State Relays
- Varioface Modules for Interface Relays
- PLC Protector MAINS-MODUTRAB
- 24 VDC I/O Signal Protection TERMITRAB
- Surge Protection for Conduit Systems SURGETRAB
- PLUSCON MODULAR PLUG CONNECTORS
- PLUSCON Sensor/Actuator Breakout Boxes
- Interbus
These Micro-Terminal blocks feature compact construction (4.2mm wide), are bridge-
able in the center, have matching ground blocks and mount on NS 15 rails. MT1.5 9not
shown) is a 2 conductor block (1-input, 1-output), MT1.5-TWIN has 1-input, 2 outputs
and MT 15 QUATTRO provides 2-inputs and 2 outputs. MTTB1.5 (not shown) is a dou-
ble level block with two independently bridgeable thru levels. It features universal
mounting for both NS 15 and NS35 rails. Color: gray (blue available); ground blocks
are yellow/green. Connections: clamping screws Flammability Rating: UL94VO.
Approvals: UL recognized, CSA certified. Accessories sold separately. Note: ground
blocks include white labels w/ground symbols.
Modular Terminal Blocks
Micro Terminal Blocks
MT-TWAIN and MT-TWIN-PE
Mfr’s Type Order No. Description AWG
MT 1.5
MT 1.5-TWIN
MT 1.5-QUATTRO
MTTB 1.5
MT 1.5-PE
MT 1.5 TWIN-PE
MT 1.5-QUATTRO-PE
26-16
3100305
3001682
3001679
1414129
3100318
3001705
3001695
00.00
Accessories for Micro Terminal / Blocks
MT-QUATTRO and MT-QUATTRO-PE
Micro Term. Block, 2-Conductor, Gray
Micro Term. Block, 3-Conductor, Gray
Micro Term. Block, 4-Conductor, Gray
Dbl.Lvl. Micro-Term. 4-Conductor, Gray
Micro Ground Term. Block for MT 1.5
Micro Ground Term. Block for MT 1.5-TWIN
Micro Ground Term. Block for MT 1.5-QUATTRO
Rating
400
400
400
400
...
...
...
17.5
17.5
16
17.5
...
...
...
V A W L
4.2
22
28
3.5
44
22
28
33.5
Dimensions (mm) Each
H (NS 35: 7.5/NS 15)
-/23.5
-/30
-/30
41/41
-23.5
-/30
-/30
Mfr’s Type Order No. Description *
D-MT 1.5
D-MT 1.5-TWIN
D-MT 1.5QUATTRO
D-MTTB 1.5
FBRN 10-4N
DG-MTTB 1.5
DP-MTTP 1.5
ZBFM 4
3100321
3002979
3002982
3002665
3001624
3002678
3002681
...
End Cover, Gray, 1mm wide
Fixed Bridge, 10 pos., Breakable
Spacer Cover, Gray, 2mm Thick
Spacer Plate, Gray, 2mm Thick
Marker Strip (order data, see “ Accessories
for Terminal Blocks”)
For Terminal Blocks
MT 1.5
MT 1.5-TWIN
MT 1.5QUATTRO
MTTB 1.5
MT 1.5, MT 1.5-TWIN, MT 1.5QUATTRO, MTTB 1.5
MTTB 1.5
MTTB 1.5
Fits all Terminal Blocks above
00.00
Each
* Spacer cover and plate compensate for level offset if standard terminal blocks are to be aligned.
Mini Terminal Blocks
These Mini-Terminal blocks range in width from 5.2mm to 8.2mm and are
bridgeable for simple and reliable power distribution. They mount on NS 15
DIN rails except MBKKB 2.5 which features universal mounting for both NS
15 and NS 35 DIN Rails. MBK3/E-Z and MBK6/E are single level blocks with
1-input and 1 output. Type MBK5/E is also single level (without label groove)
and snap-fits on to the mounting rail. Type MBKKB2.5 is a double level with
two bridgeable inputs and outputs. Color: gray, but all except MBK6/E are
available with blue housing. Flammability Rating: UL94V2. Connections:
Screw Clamps. Approvals: UL Recognizable, CSA Certified.
Mfr’s Type Order No. Description AWG
MBK 3/E-Z
MBK 6/E
MBK 5/E
MBKKB 2.5
24-12
20-8
24-12
24-12
1413036
0552024
1415076
1413052
00.00
Mini Terminal Block, 2-Conductor, Gray
Mini Terminal Block, 2-Conductor, Gray
Mini Terminal Block, Snap Mnt., 2-Cond.,Gray
Mini Terminal Block, Dbl. Lvl., 4-Cond., Gray
Rating
500
500
500
500
32
57
32
24
V A W L
5.2
8.2
6.2
5.2
28
35
28
62
Dimensions (mm) Each
H (NS 35:7.5/NS 35:15NS/15)
-/-/32
-/-/36
-/-/32
47.5/48/55.5
Accessories for Mini Terminal Blocks
Mfr’s Type Order No. Description *
D-MBK/E
D-MBK 6/E
D-MBKKB 2.5
FBRI 10-5N
FBI 10-8
FBI 10-6
FBRNI 10-5N
EBL 10-5
EB 10-8
EB 10-6
EB 10-5
DP-MBKKB 2.5
ZB5
ZB8
1415021
1413049
1413052
2770642
0203263
0203250
2770639
2303132
0202138
0201139
1401132
1413065
...
...
End Cover, Gray
For Terminal Blocks
00.00
Each
Spacer plate compensates for level offset if standard blocks are to be aligned.
Fixed Bridge, 10-Pos., Breakable
Insertion Bridge, 10-Pos., Breakable
Spacer plate, Gray, 2.5mm Thick
Marker Strip (Order data, See “Accessories
for terminal Blocks”.)
1mm wide
1.5mm wide
2.5mm wide
MBK 3/E-Z, MBK 5/E
MBK 6/E
MBLKB2.5
MBK 3/E-Z
MBK 6/E
MBK 5/E
MBKKB 2.5
MBK 3/E-Z
MBK 6/E
MBK 5/E
MBKKB 2.5
MBKK8 2.5
MBK 3/E-Z, MBKKB 2.5
MBK 6/E
MBK 3/E-Z MBK 6/E MBK 5/E MBKKB 2.5
4.2
5.2
5.2
6.2
8.2
10.2
12.2
15.2
20
25
31
36
500
800
80
800
800
800
800
1000
1000
1000
1000
1000
Universal terminal blocks for many applications can be wired fast and reliably, can be bridged and can be labeled on both sides. these blocks have a universal base
which snaps into NS 32 and NS 35 ( or ) mounting rails. UKH series high current terminal blocks are enclosed and require no end covers. Color: Gray
(Blue available). Connections: Screw Clamps. Flammability Rating: UL94VO (UL94V2 for UK 2.5N, UK 3N, UK 16N). Approvals: UL Recognized, CSA Certified.
European approvals available upon request. A full range of accessories are available (Ordered Separately).
Modular Terminal Blocks
Universal Terminal Blocks
Mfr’s Type Order No. Description AWG
UK 1.5N
UK2.5N
UK 3N
UK5N
UK 6N
UK10N
UK16N
UK 35
UKH 50
UKH 95
UKH150
UKH240
26-16
24-14
24-12
24-10
24-8
20-6
12-4
18-0
6-0
4-000
2-300
00-500
3005837
3003347
3001501
3004362
3004524
3005073
3006043
3008012
3009118
3010013
3010110
3010217
00.00
Accessories for Micro Terminal / Blocks
Universal Terminal Block, Gray
Universal High Current Terminal Block, Gray
Rating
17.5
24
32
41
57
76
101
150
150
232
309
415
V A W L
42.5
42.5
42.5
42.5
42.5
42.5
42.5
50
70.5
83
100
100
Dimensions (mm) Each
H (NS 35: 7.5/NS 15)
42/49.5/47
42/49.5/47
47/54.5/52
47/54.5/52
47/54.5/52
47/54.5/52
54/61.5/59
62/69.5/67
.../83.5/81.5
.../97.5/95.5
.../118.5/116
.../131.5/129.5
Mfr’s Type Order No. Description *
D-UK 2.5
D-UK 4/10
D-DU 16
FBRI 10-4N
FBRI 10-5N
FBI 10-6
FBI 10-8
FBI 10-10
FBI 10-12
FBI 2-15
FBI 3-15
FBI 2-20
FBI 3-20
EBL 10-5
EB 10-6
EB 10-8
EB 10-10
EB 10-12
EB 10-15
EB 2-25 UKH
EB 3-25/UKH
EB 2-31/UKH
EB 3-31/UKH
EB 2-36/UKH
EB 3-36/UKH
ZB 4
ZB 5
ZB 6
ZB 8
ZB 10
3001022
3003020
3006027
3001624
2770642
0203250
0203263
0203276
0203454
0201333
0201278
0201346
0201317
2303132
0201139
0202138
0203137
3006137
0205135
0201362
0201375
0201388
0201391
0201401
0201414
...
...
...
...
...
End Cover, Gray
Fixed Bridge, 10-Pos, Breakable
Fixed Bridge
Insertion Bridge, 10-Pos., Breakable
Insertion Bridge, Snap Fitted
Marker Strips
(Order data, See “Accessories for Terminal
Blocks”)
For Terminal Blocks
UK 1.5N, UK 2.5N
UK 3N, UK5N, UK 6N, UK 10N
UK 16N
UK 1.5 N
UK 2.5, UK 3N
UK5N
UK 6N
UK 10N
UK16N
UK 35
UK 35
UKH 50
UKH 50
UK 2.5N, UK 3N
UK 5N
UK 6N
UK 10
UK 16N
UK 35
UKH 95
UKH 95
UKH 150
UKH 150
UKH 240
UKH 240
UKH1.5N
UK 2.5N, UK 3N
UK 5N
UK 6N
UK 10, UK 16N, UK 35, UKH 50, UKH 95, UKH 150, UKH 240
00.00
Each
Accessories Table
The accessories below are the most common. A wider range f accessories can be found on the page entitled “Accessories for Terminal Blocks” which follows this
section. Fixed Bridge: a 10-position breakable screw strip w/insulated collars for voltage bridging in the Terminal center. Insertion Bridge: a 2,3 or 10-position fully
insulated, breakable strip for voltage bridging at the connection points. Notes: All bridges have a load capacity of at least 70% of nominal current. Marker Strips:
Snap-in Labels (Several variations).
1.5mm wide
1.8mm wide
1.5mm wide
2-Pos.
3-Pos.
2-Pos.
3-Pos.
2-Pos.
3-Pos.
2-Pos.
3-Pos.
2-Pos.
3-Pos.
UK 1.5N
UK 16N UK 35N
UK 2.5N UK 3N
UKH 50 UKH 95
UK 6N
UK 5N
UKH 150 UKH240
UK 10N
4.2
5.2
5.2
6.2
8.2
10.2
12.2
15.2
20
25
...
...
...
...
...
...
...
...
...
...
These Terminal blocks use the mounting rails as a
ground (PE) busbar which makes it possible to posi-
tion directly next to the conductor terminal blocks.
Designed with a universal base which adapts to both
NS 32 and NS 35 ( or ) mounting rails.
Included with each block are white labels printed
w/ground symbols. Colors: Green/Yellow.
Connections: Screw clamps. Flammability Rating:
UL 94VO (UL94V2 for US LKG 50 and USLKG 95).
Approvals: shown above. European approvals avail-
able. Accessories: ZB Series marker strips (order data, see “Accessories for Terminal Blocks).
Modular Terminal Blocks
Universal Ground Terminal Blocks
Mfr’s Type Order No. Description AWG
USLKG 1.5N
USLKG 2.5N
USLKG 3
USLKG 5
USLKG 6N
USLKG 10N
USLKG 16
USLKG 35
USLKG 50
USLKG 95
26-16
24-21
24-12
24-12
24-8
20-6
12-4
18-0
6-0
4-000
3005853
0441119
0441083
0441504
0442079
3003923
0443023
0444019
0443049
0441041
00.00
Universal Ground Terminal Blocks
*Current carrying capacity is determined
by type of rail.
Rating
...
...
...
...
...
76
101
150
150
232
V A* W L
42.5
42.5
42.5
42.5
42.5
42.5
42.5
50
70.5
83
Dimensions (mm) Each
H (NS 35: 7.5/NS 35:15/NS 32)
42/49.5/47
42/49.5/47
47/54.5/52
47/54.5/52
47/54.5/52
47/54.5/52
54/61.5/59
62/69.5/67
-/83.5/81.5
-/99/95.5
UNIVERSAL DOUBLE LEVEL TERMINAL BLOCKS
The UKK Double level Terminal blocks are avail-
able in two versions. the UKKB Types have
bridge shafts in both levels and the UKK types
can only be bridged in the upper level. type UKK
5-PE ground Terminal block is available for con-
necting ground conductors. These blocks have
a universal base which which adapts to both NS
32 and NS 35 mounting rails. Color: Gray (blue
available). Ground (PE) block is green/yellow.
Connections: Screw clamps. Flammability
Rating: UL94V0 (UL94V2 for UKK 5-PE).
Approvals: UL recognized, CSA Certified.
European approvals available upon request. A full range of accessories are available (Order separately).
Accessories for Micro Terminal / Blocks
Mfr’s Type Order No. Description *
D-UKK 3/5
D-UKKB 3/5
DG-UKK 3/5
DG-UKK 3/5
DP-UKK 3/5
DP-UKKB 3/5
FBRNI 10-5N
FBI 10-6
EBL 10-5
EB 10-6
ZB 5
ZB 6
2770024
2771023
2770817
2770273
2770794
2770804
2770639
0203250
0303132
0201139
...
...
End Cover, gray, 2.5mm wide
End Cover, gray, 2.5mm wide
Spacer Cover, gray, 2.5mm thick
Spacer Cover, gray, 2.5mm thick
Spacer Plate, gray, 2..5mm thick
Spacer Plate, gray, 2..5mm thick
Fixed Bridge, 10-pos., breakable
Fixed Bridge, 10-pos., breakable
Insertion Bridge, 10-pos., Breakable
Insertion Bridge, 10-pos., Breakable
Marker Strips
(Order, see “Acces. for Term. Blocks”)
For Terminal Blocks
UKK 3, UKK 5
UKKB 3, UKKB 5
UKK 3, UKK 5
UKKB 3, UKKB5
UKK 3, UKK5
UKKB 3, UKKB5
UKK 3, UKKB 3
UKK 5, UKKB 5
UKK 3, UKKB 3
UK 5, UKKB 5
UKK 3, UKKB3
UK5, UKKB 5, UKK 5-PE
00.00
Each
USLKG 1.5N USLKG 2.5N USLKG 3
USLKG 16N USLKG 35
USLKG 6N
USLKG 5
USLKG 50 USLKG 95
USLKG10N
5.2
5.2
6.2
6.2
6.2
500
500
500
500
...
Mfr’s Type Order No. Description AWG
UKK 3
UKKB 3
UKK 5
UKKB 5
UKK 5-PE
24-12
2770011
2771010
2774017
2771146
2774211
00.00
Universal Double Level Terminal Block
Universal Double Level Ground Term Block
Rating
32
32
32
32
...
V A* W L
56
67
56
67
56
Dimensions (mm) Each
H (NS 35: 7.5/NS 35:15/NS 32)
62/69.5/67
The accessories below are the two most common. A wider range of accessories are available (See
“Accessories for Terminal Blocks”). Space covers and plates compensate for level offset if standard
Terminal blocks are aligned.
Accessory Table
FIG
1
1
2
2
3
3
4
4
5
5
...
...
UKK 3 UKKB 3 UKK 5 UKKB 5 UKK 5-PE
12345
6.2
250
250
250
250
250
400*
400
400*
The DIK 1.5 3-level sensor input block distributes a signal line (top level) as well as - and + potentials (middle and bottom levels) via insertion bridges. DIKD 1.5 is
the same, except with 3 feed -through contacts. DOK 1.5 is a 3-level actuator output block which accommodates a signal line (top level) a bridged negative poten-
tial (middle level) and a grounding busbar (bottom level). VIOK 1.5 is a 4-level combination of the DIK/DOK blocks where only one block is needed for sensors and
actuators. This block distributes a signal line (top level), - and + supplies (middle levels) and grounding busbar (bottom level). VIOK 1.2-2D has a 2 feed-through
and 2 busbar levels. VIOK 1.5-3D/PE is a 4-conductor feed-through block. The 3-conductor DLK 2.5-PE and DLKB 2.5-PE blocks are designed for 3-phase cur-
rent. The DLKB is bridgeable via insertion bridges (bottom and middle levels) and fixed bridges (top level). Color: gray. Connections: screws. Flammability rat-
ing: UL94V2 (UL94V0 for DLK/DLKB blocks) Approvals: UL recognized CSA certified. Call for European approvals. Mounting : for NS 35 ( ) rails only. A
full range of accessories are available.
Modular Terminal Blocks
3 and 4-level Terminal Blocks
Mfr’s Type Order No. Description AWG
DIK 1.5
DIKD 1.5
DOK 1.5
VIOK 1.5
VIOK 1.5-2D
VIOK 1.5-3D/PE
DLK 2.5-PE
DLKB 2.5-PE
24-12
2715966
2715979
2717016
2718015
2718196
2718206
3011041
3011038
00.00
8-lvl Sensor terminal block
as above, but w/3 through contacts
3-lvl. Actuator terminal block
4-lvl. Sensor/Actuator term. Block
as above, but w/2 thru & 2 busbar levels
as above but w/4 feed thru levels
4-lvl., 3- conductor terminal blocks
as above, but bridgeable one side
Rating
26
24
26
26
26
26
26
26
V A* W L
55
72.5
61.5
62.5
73
82.5
83
83.5
Dimensions (mm) Each
H (NS 35:7.5/NS 35:15)
54.5/62
54.5/62
54.5/62
70/77.5
70/77.5
70/77.5
70/77.5
70/77.5
Accessory Table for 3 and 4-Level Terminal Blocks
The UK... Twin Terminal blocks solve the problem of “power distribution.” They have two indepen-
dent conductor connections on the load side, while on the input side they are the same shape as
feed-thru universal terminal blocks UK 3N and UK 5N. The UDK versions feature power distribution
using 2 terminal points on each connection side, as well as two bridging points in the terminal cen-
ter. Both versions include ground terminal blocks in green-yellow closed housings. Color: gray
(blue available). Connections: screws. Flammability Rating: UL94V2. Mounting: Universal.
Approvals: Call.
Accessories for Micro Terminal / Blocks
Mfr’s Type Order No. Description
FBI 10-6
EB 80-DIK BU
EB 80-DIK RD
EB 10-DIK GY
EB 10-DIK RD
EB 10-DIK BU
ZB 6
0203250
2715940
2715953
2715937
2716774
2716680
...
Fixed Bridge, 10-pos., breakable
Insertion Bridge, 80-pos., breakable, blue,
Insertion Bridge, 80-pos., breakable, red
Insertion Bridge, 10-pos., breakable, gray
Insertion Bridge, 10-pos., breakable, red
Insertion Bridge, 10-pos., breakable, blue
Marker strips (order data, see “Accessories for Terminal
Blocks”)
For Terminal Blocks
Fits all of the Term. Blocks above
Fits all except DLK 2.5 PE
Fits all except DLK 2.5 PE
Fits all except DIK 1.5, DIKD 1.5, DLK 2.5-PE
Fits all except DIK 1.5, DIKD 1.5, DLK 2.5-PE
Fits all except DIK 1.5, DIKD 1.5, DLK 2.5-PE
Fits all of the Term. Blocks above
00.00
Each
DIK 1.5 DOK 1.5 VIOK 1.5 VIOK 1.5-3D/PEVIOK 1.5-2D DLK 2.5-PE
Twin Conductor Terminal Block
UK...TWIN
Double Terminal Blocks UDK
*If EB insertion bridge is used, the nominal voltage is reduced to 250V.
Special Terminal Blocks/Special Connections
5.2
6.2
5.2
6.2
5.2
6.2
6.2
400
500
...
...
500
690
...
Mfr’s Type Order No. Description AWG
UK 3-TWIN
UK 5-TWIN
UK 3-TWIN-PE
UK 5-TWIN-PE
UDK 3
UDK 4
UDK 4-PE
24-14
24-12
24-14
24-12
24-12
24-12
24-12
3002225
1923021
1923128
1923076
2775375
2775016
2775184
00.00
Twin Conductor Term Block
Twin Conductor Term Block
Twin Conductor Ground Term Block
Twin Conductor Ground Term Block
Double Term Block
Double Term Block
Double Ground Term Block
Rating
24
32
...
...
32
32
...
V A W L
50.5
50.5
50.5
50.5
63.5
63.5
63.5
Dimensions (mm) Each
H (NS 35:7.5/NS35:15/NS 32
7/54.5/52.5
Note: Ground Blocks include white labels with ground symbols.
Accessory Table for 3 and 4-Level Terminal Blocks
Accessories for Micro Terminal / Blocks
Mfr’s Type Order No. Description
D-UK 5-TWIN
D-UDK 4
FBRI 10-5N
FBI 10-6
EBL 10-5
EB 10-6
ZB 5
ZB 6
1923034
2775113
2770642
0203250
2303132
0201139
...
...
End Cover, Gray, 2mm wide
End Cover, Gray, 1.5mm wide
Fixed Bridge, 10-pos., breakable
Fixed Bridge, 10-pos., breakable
Insertion Bridge, 10-pos., breakable
Insertion Bridge, 10-pos., breakable
Marker strip (order data, see “Accessories for Terminal
Blocks”)
For Terminal Blocks
UK 3-TWIN, UK 5-TWIN
UDK 3, UDK 4
UK 3-TWIN, UDK 3
UK 5-TWIN, UDK 4
UK 3-TWIN, UDK 3
UK 5-TWIN, UDK 4
UK 3-TWIN, UK3-TWIN-PE, UDK 3
UK 5-TWIN, UK5-TWIN-PE, UDK 4, UDK 4-PE
00.00
Each
6.2
6.2
6.2
6.2
500
500
690
400*
These fuse or component terminal blocks are
base terminal blocks which accept the fuse or
component plugs listed below. Because these
base blocks have the same shape and dimen-
sions as standard feed-through blocks MBK5,
UK5N, UDK4 and UKKB5, they can be combined
with the standard blocks on one rail to perform
various tasks. Color: Gray. Connections:
Screw clamps. Flammability Rating: UL94V2.
European approvals available. Accessories sold
separately.
Modular Terminal Blocks
Terminal Blocks for Fuse and Component Plugs
Mfr’s Type Order No. Description AWG
MBK 5/E-TG
UK 4-TG
UDK 4-TG
UKK 5-TG
24-12
24-12
24-12
24-12
1415089
2812018
2777014
3007042
00.00
Base Terminal Block, Gray
Rating
16
16
16
16*
V✝A* W L
28
42.5
63.5
80
Dimensions (mm) Each
H(NS35:7.5/NS35:15/NS 32/NS15)
-/-/-/36
47/54.5/52/-
47/54.5/52/-
68.5/76/73/-
MBK5/E UK 4-TG UDK 4-TG UKK 5-TG
300
300
300
-
-
-
-
-
-
Mfr’s Type Order No. Description
ST-SI-UK 4
ST-SILED 24-UK 4
ST-SILA 250-UK 4
ST-BE
ST-BE-LA 24
ST-BE-LA 230
ST-1N4007
ST-BE-VIERPOL
ST-B250 C 1500
0921011
0921037
0921053
2802316
2802374
2802387
2802329
2802332
2802345
00.00
Fuse plug for 5x20 mm fuses, 26.5mm high, color: black
As above, except with 24v light indicator (15-30 v AC/DC)
As above, except with 250v light indicator (110-250v AC/DC)
Single component plug (for 2-position components), 19mm high, gray
As above, except with 24V DC LED
As above, except with 230v AC/DC LED
As above, except with universal diode 1N4007
Double component plug (for 4 position components), 19mm high, gray
As above, except with bridge rectifier B 250 C 1500
Rating
6.3*
6.3*
6.3*
-
-
-
-
-
-
V A Each
Accessory Table
✝Current & Voltage determined by component & fuse plugs *Upper level (lower level 400v, 26A) ** For std block UK 5N
Accessories for Micro Terminal / Blocks
Mfr’s Type Order No. Description *
D-MBK 5/E-T
P-UK 4/10
D-UDK RELG
FBI 10-6
EB 10-6
ZB 6
1413706
3003020
277027
0203250
0201139
End Cover, Gray
Fixed Bridge, 10-pos., breakable
Insertion Bridge, 10-pos., breakable
Marker Strip (order data, see "Accessories for
Terminal blocks")
For Terminal Blocks
MBK 5/E-TG
UK 4-TG
UDK 4-TG
UKK 5-TG
Fits all 4 base blocks
UK 4-TG, UDK 4-TG, UKK 5-TG
00.00
Each
1mm wide
1.8mm wide
1.5mm wide
Fused and Component Plugs
ST-SI-UK 4 ST-BE
Several plug versions are available for use with the base terminal blocks
described above. The ST-SI-UK 4 fuse plugs accommodate 5x20 man fuse car-
tridges, and are available with or without a light indicator. The plug housing
opens on one side to change the fuse. The ST-BE component plugs are avail-
able as single plugs for 2-position components and as double plugs for 4-posi-
tion components with or without inserted components. The component itself is
inserted and clamped at the top. The open design means that larger compo-
nents can be used that protrude above the plug. All fuse and component plugs
are coded to avoid polarity reversal. Color: Fuse plugs (black), component
plugs (gray). Flammability Rating: fuse plugs (UL94V2), Component plugs
(UL94V0).
*UL (CSA 10A)
Component Terminal Block
This terminal block with integrated diode 1N4007 (conducting direction from top to
bottom) is an alternative to using component plugs. It is the same size and shape
as universal double level block UKK 5. Color: gray. Connections: screw clamps.
Flammability Rating: UL94V2. Mounting: Universal. Diode Reverse Voltage:
1300 V; 1A max continuous current.
6.2
500
Mfr’s Type Order No. Description AWG
UKK 5-DIO/O-U 24-122791016 00.00
Term Block w/1N 4007 Diode, Gray
Rating
32
V✝AW L
56
Dimensions (mm) Each
H(NS35:7.5/NS35:15/NS 32
62/69.5/67
Accessories
Mfr’s Type Order No. Description
D-UKK 3/5
DG-UKK 3/5
DD-UKK 3/5
ZB 6
2770024
2770817
2770794
...
00.00
End cover, gray, 2.5 mm wide
Spacer Cover, compensates for level offset if standard blocks are to be aligned
Spacer plate, compensates for level offset if standard blocks are to be aligned, 2.5mm Th.
Marker strip (order data, see "Accessories for terminal blocks")
Each
with diode from top to bottom
8.2
6.2
500
400
These slide link Test disconnect blocks are used extensively in the utilities industry, Each URTK/S-BEN
block has a sliding link which enables the end user to employ a disconnect at the full rated value of the
terminal. the connection screws have a socket cavity to accommodate 4mm Test plugs and 2 and 4-posi-
tion short circuit plugs. the smaller URTL/SS block has the same features, but the connection screws are
recessed with on opening which allows plugs to be inserted directly. Color: gray. mounting: Universal for
plugs on either NS35 or NS 32 DIN rails. Flammability rating: URTK/S-BEN (UL94V0), URTK/SS
(UL94V2).
Modular Terminal Blocks
Side Link Disconnect Terminal Blocks
Mfr’s Type Order No. Description AWG
URTK/S-BEN
URTK/SS 20-8
24-12
0309086
0321019 00.00
Slide Link Disconnect term. Block
Rating
57
26
V✝A* W L
61
56.5
Dimensions (mm) Each
H(NS35:7.5/NS35:15/NS 32)
58.5/66/63.5
40/47.5/45
URTL/S-BEN URTK/SS
Accessories
Accessories for Micro Terminal / Blocks
Mfr’s Type Order No. Description *
D-UTK/S-BEN
D-URTK/SS
FBRNI 10-6 N
EB 10-8
S
KSS-8
KSS 4-8
KSS-6
KSS 3-6
ZB6
ZB8
0308029
0321022
2770626
0202138
0308359
0311540
0309549
0301547
0309523
...
...
End Cover, Gray, 2.2mm wide
End Cover, Gray, 1mm wide
Fixed Bridge, 10-Pos., Breakable
Insertion Bridge, 10-Pos., Breakable
Switch lock (prevents operation of slide link)
2-pos.
Short Circuit Plug 4-pos.
2-pos.
3-pos.
Marker Strip (order data, see “Accessories for termi-
nal Blocks”)
For Terminal Blocks
URTK/S-BEN
URTK/SS
URTK/SS
URTK/S-BEN
URTK/S-BEN
URTK/S-BEN
URTK/S-BEN
URTK/SS
URTK/SS
URTK/SS
URTK/S-BEN
00.00
Each
KNIFE DISCONNECT TERMINAL BLOCKS
UK 5-MTK-P/P
Knife disconnect blocks permit rapid fault isolation
and insertion under zero volt conditions. They fea-
ture space saving construction and high current car-
rying capacity. P/P types have test Socket Screws
(to accommodate 4mm test Plugs) in lieu of standard
screw connections. UDK4-MTK-P/P has double
connection points to accommodate several wires on
each module. Color: Gray (knife disconnects
orange). Flammability Rating: UL92V2. Mounting:
Universal. Approvals: UL Recognized, CSA
Certified.
Accessories
Mfr’s Type Order No. Description
D-MTK
D-UDK4
FBI 10-6
EBL 10-5
EB 10-6
ATS-MTK
ATP-UK 5-MTK
ZB 5
ZB 6
3101029
2775113
0203250
2003132
0201139
3101223
3004210
...
..
00.00
End Cover, Gray 1mm wide
End Cover, Gray, 1.5mm wide
Fixed Bridge, 10Pos., Breakable
Insertion Bridge, 10-Pos., Breakable
Insertion Bridge, 10-Pos., Breakable
Partition Plate, for electrical separation of Terminal Groups
Partition Plate, for electrical separation of Terminal Groups
Marker Strips (order data, see “Accessories for
Terminal Blocks
Each
MTK-P/P UDK 4-MTK-P/P UKK 5-MTK-P/P
5.2
5.2
5.2
5.2
6.2
6.3
6.2
6.2
400
400
400
400
800
690
400
400
Mfr’s Type Order No. Description AWG
MTK-P/P
MTK
MTKD-P/P
MTKD
UK 5-MTK-P/P
UDK 4-MTK-P/P
UKK 5-MTK-P/P
UKK 5-MTKD-P/P
24-12
3104013
3101016
3100020
3100017
3004032
2775210
280004
2800017
00.00
Knife Disconnect Term.Block w/socket screws
As above, except w/standard screws
Feed-thru Block (w/o knife), w/socket screws
As above, except w/standard screws
Knife Disconnect Term. Block w/socket screws
As above, w/double connections points
Dbl. Lvl, knife Disconnect upper Lvl. socket screws
Dbl. Lvl. Feed-thru (w/o knife), w/socket screws
Rating
16
16
16
16
16
16
12*
12*
V A W L
46
46
46
46
51
63.5
80
80
Dimensions (mm) Each
H (NS35:7.5/NS35:15/NS 32)
51.5/59/56
51.5/59/56
51.5/59/56
51.5/59/56
58.5/66/63.5
47/54.5/52
68/76/73
68/76/73
For Terminal Blocks
MTK-P/P, MTK, MTKD-P/P, MTKD
UDK 4-MTK-P/P
UKK 5-MTK-P/P, UKK 5-MTKD-P/P
MTK-P, MTK, MTKD-P/P, MTKD
UK 5-MTK-P/P, UDK 4-MTK-P/P
MTK-P/P, MTK, MTKD-P/P, MTKD
UK 5-MTK-P/P
MTK-P/P, MTK, MTKD-P/P, MTKD
UK 5-MTK-P/P, UDK 4-MTK-P/P, UKK 5-MTK-P/P
UKK 5-MTKD-P/P
*Upper level (lower level 26A) NOTE: Types UK5... and UKK5... have enclosed houses
22
33
500
750*
These compact direct mounted terminal blocks are used primarily with network connections for
electrical and electronic equipment and small terminal boxes. G5 blocks accommodate wires up to
12 AWG and G10 blocks are for wires up to 8 AWG (stranded) and 6 AWG (solid). The housing is
made of shock proof UL94V2 impact resistant plastic. The blocks interlock and are supplied with
two screws each for mounting. Connection points can be labeled with optional marker pins which
insert into notches in the top of each block. Color: Gray.
CLIPLINE Modular Terminal Blocks
Equipment Terminal Blocks
M f r. ’ s Ty p e Order No. D e s c r i p t i o n AW G
G 5/2
G 5/3
G 5/4
G 5/6
G 5/12
G 10/2
G10/3
G10/4
G 10/5
24-12
20-6
2716020
2716033
2716046
2716062
2716127
2716703
2716716
2716729
2716732
1.84
2.63
3.35
4.77
9.04
4.89
7.35
9.80
12.24
Equipment Term. Block
Equipment Term. Block
R a t i n g
32
76
V A 20
31
38
52
92
29
46
57
68
Dimensions (mm) E a c h
H
24
31
G 5/...
Accessories
Accessories for Micro Terminal / Blocks
M f r. ’s Ty p e Order No. D e s c r i p t i o n
BN WH
BNB WH:...*
BN-AS WH
WS-G 5/2
WS-G 5/3
WS-G 5/4
B-STIFT
1401404
1401417
1401420
2720029
2720032
2716499
1051993
Marker pin, unprinted for labeling with a marker pen, white, area 4x4 mm
As above, except printed with 1, 2, or 3 characters, white, area 4x4 mm
Group cover marker, unprinted, white, area: 4x20.5 mm
Warning plate, completely covers terminal surface
Marker pen for labeling unprinted markers. Smear-proof and waterproof.
0.08
0.02
0.18
0.32
0.35
0.36
call
E a c h
1/N/PE Connecting Terminal Blocks
*DIN VDE 0606(800V IEC 947-7-1)
2-pos.
3-pos.
4-pos.
6-pos.
12-pos.
2-pos.
3-pos.
4-pos.
5-pos.
LW
Marker pins are available either in white/unprinted for labeling with a marker pen or white/printed with 1, 2 or 3 characters (must specify characters when ordering).
For G 5/2
For G 5/3
For G 5/4
*Specify marking when ordering.
Neutral (N), ground (PE) or phase conductors (L) are often connected to central busbars and require clear marking of the terminal
blocks to the corresponding circuit. The AKG connecting terminal blocks fulfill this requirement with their blue, green-yellow or black
housings. They fit onto 3x10 mm busbars with a captive pressure plate and non-loosening screws. Three supports made of insulat-
ing material are available to hold the busbars: a single bar support and two offset double bar supports (one 48mm high, the other only
36.8 mm high). Flammability Rating: UL94V2. Approvals: ULRecognized, CSACertified (AKG 16 only).
7
10
41
76
M f r. ’ s Ty p e Order No. D e s c r i p t i o n AW G
AK 4
AKG 4BU
AKG 4 CNYE
AKG 4 BK
AK 16
AKG 16 BU
AKG 16 GNYE
AKG 16 BK
20-10
16-6
0404017
0421016
0421029
0421032
0404033
0423014
0423027
0423030
0.46
0.63
0.63
0.63
0.68
0.92
0.92
0.92
L/N/PE Connecting term block w/o insulating cap
As above, except w/ blue insulating cap (for N)
As above, except w/ green-yellow insulating cap (for PE)
As above, except w/ black insulating cap (for L1,L2,L3)
L/N/PE connecting term block w/o insulating cap
As above, except w/ blue insulating cap (for N)
As above, except w/ green-yellow insulating cap (for PE)
As above, except w/black insulating cap (for L1,L2,L3)
A
23.5
23.5
Dimensions (mm) E a c h
H*
35.5
44.5
Accessories
Accessories for Micro Terminal / Blocks
M f r. ’s Ty p e Order No. D e s c r i p t i o n
NLS-CU 3/10
AB/SS
AB 2/SS
ABN 2/SS
ZB 6
ZB 8
0402174
0404428
0404431
0404460
...
...
Neutral Busbar, 3x10 mm, length: 1m, copper tin-plated, 140 A max.
Support, single bar, insulated, w/retaining screw, for 3x10 mm or 6x6 mm busbars
Support, offset double bar, insulated, for 3x10 mm or 6x6 mm busbars, 48 mm high
Support, offset double bar, insulated, for 3x10 mm or 6x6 mm busbars, 36.8 mm high
Marker strip for AK 4 series (order data, see “Accessories for Terminal Blocks”).
Marker strip for AK 16 Series (order data, see “Accessories for Terminal Blocks”)
11.45
1.03
1.69
1.69
0.91
0.91
E a c h
* Height above mounting surface.
LW
G10/...
CLIPLINE Spring Cage Terminal Blocks
Acomplementary option to screw terminal block technology is spring cage tech-
nology where a spring pulls the conductor tight against the current bar. The pre-
stressed corrosion-proof copper alloy spring is opened using a screwdriver so
the conductor can be inserted into the insertion space through an opening in the
spring leg. The conductor is pulled against the current bar under spring force
when the screwdriver is removed.
ST Series
Phoenix Contact announces the introduction of a new high density spring cage terminal block family (ST). The new “mini spring” design reduces the overall size of
the terminal block without giving up any features. The STproduct has a flexible dual channel push-in jumper system, which can handle and chain bridging using 2,
3, 4, 5, 10 or 20 position jumpers. There is a generous wire entrance which eliminates the need to use a larger termial block when ferrules are used. The ST block
has large center marking for easy access and readability and end marking for labeling each termination point. The housings are made of unbreakable polyamide
6.6. Color: gray (-PE models green-yellow), Connections: spring cage. Flammability Rating: UL94V0. Mounting: EN50022 (NS35) rails.
Spring Cage Feed Through Terminal Blocks
4.2
4.2
5.2
5.2
6.2
6.2
8.2
8.2
300
...
600
...
600
...
600
...
M f r. ’ s Ty p e Order No. D e s c r i p t i o n AW G
ST 1.5
ST 1.5-PE
ST 2.5
ST 2.5-PE
ST 4
ST 4-PE
ST 6
ST 6-PE
26-14
26-14
26-12
26-12
24-10
24-10
20-8
20-8
3031076
3031513
3031212
3031238
3031364
3031380
3031487
3031500
0.86
2.87
0.95
3.40
1.12
3.42
1.67
4.28
Spring cage feed-through terminal, gray
Spring cage ground terminal block, gn/ye
Spring cage feed-through terminal, gray
Spring cage ground terminal block, gn/ye
Spring cage feed-through terminal, gray
Spring cage ground terminal block, gn/ye
Spring cage feed-through terminal, gray
Spring cage ground terminal block, gn/ye
R a t i n g
15
...
20
...
30
...
50
...
V A W L
48.5
48.5
48.5
48.5
56
56
65.5
65.5
Dimensions (mm) E a c h
H (NS35:7.5/NS35:15)
36.5/44
36.5/44
36.5/44
36.5/44
36.5/44
36.5/44
43.5/51
43.5/51
Multi-Conductor Spring Cage Terminals Blocks
4.2
4.2
5.2
5.2
6.2
6.2
4.2
4.2
5.2
5.2
6.2
6.2
300
...
600
...
600
...
300
...
600
...
600
...
M f r. ’ s Ty p e Order No. D e s c r i p t i o n AW G
ST 1.5-Twin
ST 1.5-Twin-PE
ST 2.5-Twin
ST 2.5-Twin-PE
ST 4-Twin
ST 4-Twin-PE
ST 1.5-Quattro
ST 1.5-Quattro-PE
ST 2.5-Quattro
ST 2.5-Quattro-PE
ST 4-Quattro
ST 4-Quattro-PE
26-14
26-14
26-12
26-12
24-10
24-10
26-14
26-14
26-12
26-12
24-10
24-10
3031128
3031144
3031241
3031267
3031393
3031416
3031186
3031209
3031306
3031322
3031445
3031461
0.93
3.58
1.10
3.87
1.17
4.03
1.09
3.80
1.58
5.03
1.96
5.09
Three-conductor spring cage feed through terminal, gray
Three-conductor spring cage ground terminal block, gn/ye
Three-conductor spring cage feed through terminal, gray
Three-conductor spring cage ground terminal block, gn/ye
Three-conductor spring cage feed through terminal, gray
Three-conductor spring cage ground terminal block, gn/ye
Four-conductor spring cage feed through terminal, gray
Four-conductor spring cage ground terminal block, gn/ye
Four-conductor spring cage feed through terminal, gray
Four-conductor spring cage ground terminal block, gn/ye
Four-conductor spring cage feed through terminal, gray
Four-conductor spring cage ground terminal block, gn/ye
R a t i n g
15
...
20
...
30
...
15
...
20
...
30
...
V A W L
60.5
60.5
60.5
60.5
71.5
71.5
72
72
72
72
87
87
Dimensions (mm) E a c h
H (NS35:7.5/NS35:15)
36.5/44
36.5/44
36.5/44
36.5/44
36.5/44
36.5/44
36.5/44
36.5/44
36.5/44
36.5/44
36.5/44
36.5/44
Double Level Spring Cage Terminals Blocks
4.2
5.2
6.2
5.2
300
600
600
600
M f r. ’ s Ty p e Order No. D e s c r i p t i o n AW G
STTB 1.5
STTB 2.5
STTB 4
MZFFKB 1.5
26-14
26-12
24-10
26-14
3031157
3031270
3031429
3005714
1.47
2.24
2.36
2.71
Double level spring cage feed through terminal, gray
Double level spring cage feed through terminal, gray
Double level spring cage feed through terminal, gray
Mini double level spring cage feed through terminal, gray
R a t i n g
15
20
30
15
V A W L
67.5
67.5
83.5
85
Dimensions (mm) E a c h
H (NS35:7.5/NS35:15)
47.5/55
47.5/55
47.5/55
42/42.5
Accessories for ST Series Spring Cage Terminal Blocks are on the next page
Feed-through terminal
blocks ST Multi-conductor spring
cage terminal blocks Spring cage double level
terminal blocks
CLIPLINE Spring Cage Terminal Blocks
Accessories for ST Series Spring Cage Terminal Blocks
(ST Series terminal blocks are on the previous page)
M f r. ’ s Ty p e Order No. D e s c r i p t i o n
D-ST 2.5
D-ST 4
D-ST 6
D-ST 2.5-Twin
D-ST 4-Twin
D-ST 2.5-Quattro
D-ST 4-Quattro
D-STTB 2.5
D-STTB 4
FBS 2-4
FBS 3-4
FBS 4-4
FBS 5-4
FBS 10-4
FBS 20-4
FBS 2-5
FBS 3-5
FBS 4-5
FBS 5-5
FBS 10-5
FBS 20-5
FBS 2-6
FBS 3-6
FBS 4-6
FBS 5-6
FBS 10-6
FBS 20-6
FBS 2-8
FBS 3-8
FBS 4-8
FBS 5-8
FBS 10-8
ATP-ST 4
ATP4-Twin
ATP4-Quattro
ATP-STTB 4
ZBFM 4
ZBFM 5
ZBFM 6
ZBFM 8
ZB 4
ZB 5
ZB 6
3030417
3030420
3030433
3030488
3030491
3030514
3030527
3030459
3030462
3030116
3030129
3030132
3030145
3030158
3030352
3030161
3030174
3030187
3030190
3030213
3030226
3030336
3030242
3030255
3030349
3030271
3030365
3030284
3030297
3030307
3030310
3030323
3030721
3030789
3030815
3030747
*
*
*
*
*
*
*
*
End cover gray, 2mm wide
End cover gray, 2mm wide
End cover gray, 2mm wide
End cover gray, 2mm wide
End cover gray, 2mm wide
End cover gray, 2mm wide
End cover gray, 2mm wide
End cover gray, 2mm wide
End cover gray, 2mm wide
Plug-in bridge 2 position
Plug-in bridge 3 position
Plug-in bridge 4 position
Plug-in bridge 5 position
Plug-in bridge 10 position
Plug-in bridge 20 position
Plug-in bridge 2 position
Plug-in bridge 3 position
Plug-in bridge 4 position
Plug-in bridge 5 position
Plug-in bridge 10 position
Plug-in bridge 20 position
Plug-in bridge 2 position
Plug-in bridge 3 position
Plug-in bridge 4 position
Plug-in bridge 5 position
Plug-in bridge 10 position
Plug-in bridge 20 position
Plug-in bridge 2 position
Plug-in bridge 3 position
Plug-in bridge 4 position
Plug-in bridge 5 position
Plug-in bridge 10 position
Partition plate for seperation of groups 2mm thick
Partition plate for seperation of groups 2mm thick
Partition plate for seperation of groups 2mm thick
Partition plate for seperation of groups 2mm thick
Marker sheets, flat for labeling outer grooves
Marker sheets, flat for labeling outer grooves
Marker sheets, flat for labeling outer grooves
Marker sheets, flat for labeling outer grooves
Marker strip for center of terminal and plug in bridges
Marker strip for center of terminal and plug in bridges
Marker strip for center of terminal and plug in bridges
For Terminal Blocks
ST2.5
ST 4
ST 6
ST2.5-Twin
ST 4-Twin
ST2.5-Quattro
ST4-Quattro
STTB 2.5
STTB 4
ST1.5
ST1.5
ST1.5
ST 1.5
ST 1.5
ST 1.5
ST 2.5
ST 2.5
ST 2.5
ST 2.5
ST 2.5
ST 2.5
ST 4
ST 4
ST 4
ST 4
ST 4
ST 4
ST 6
ST 6
ST 6
ST 6
ST 6
ST 1.5, 2.5, 4, 6
ST 1.5, 2.5, 4 Twin
ST 1.5, 2.5, 4 Quattro
ST1.5, 2.5, 4 STTB
ST 1.5 all series
ST 2.5 all series
ST4 all series
ST 6
ST 1.5 all series
ST2.5 all series
ST 6
0.46
0.49
0.49
0.47
0.48
0.49
0.49
0.51
0.52
0.40
0.80
1.25
1.55
3.25
Call
0.40
0.80
1.25
1.55
3.25
6.50
0.40
0.80
1.25
1.55
3.25
6.50
0.50
1.05
1.70
2.10
4.25
0.43
0.57
0.61
0.61
8.55
8.55
8.55
8.55
0.91
0.91
0.91
E a c h
A m p e r a g e
…
…
…
…
…
…
…
…
…
17.5
17.5
17.5
17.5
17.5
17.5
24
24
24
24
24
24
32
32
32
32
32
32
41
41
41
41
41
…
…
…
…
…
…
…
…
…
…
…
* Order data, see “Accessories for Terminal Blocks”
CLIPLINE Spring Cage Terminal Blocks
Spring Cage Knife Disconnect Terminal Blocks
5.2
5.2
5.2
6.2
6.2
6.2
400
M f r. ’ s Ty p e Order No. D e s c r i p t i o n AW G
24-12
20-10
3001873
3025053
3025011
3005798
3005808
3001857
3.62
4.53
4.22
13.27
13.35
2.17
Knife disconnect terminal block: 1-current
As above, except with 2-circuits
Dbl.level term. blk. W/top disconnect
As above, w/both levels disconnecting
1-input, 2-disconnectable outputs
Base term.blk for fuse/component plugs
R a t i n g
16*
V A W L
71
88.5
104
107
88.5
58.5
Dimensions (mm) E a c h
H (NS 35:7.5/NS 35:15)
37.5/45
37.5/45
49/56.5
55/62.5
55/62.5
40.5/48
These feed-through knife disconnect terminal blocks with 2.3 mm test plugs permit
rapid fault isolation and inspection of work under zero volt conditions. Models ZFK
2.5-MT and ZFDK 2.5-MT (not shown) are single level blocks with one and two dis-
connectable feed-through circuits respectively. Models ZFKK 2.5-MT (not shown) and
ZDMTK 2.5 are double level blocks; ZFKK 2.5-MT disconnects only in the top level and
ZDMTH 2.5-MT on both levels. ZDMTK 2.5-TWIN has one input circuit and two dis-
connectable output circuits. Model ZFK 4-TG is a fuse or component base terminal
block which accepts the ST-SI...fuse plugs and ST-BE component plugs shown on a
previous page. Color: gray (orange disconnects). Flammability Rating: UL94V0.
Mounting: NS 35 rails.
M f r. ’ s Ty p e Order No. D e s c r i p t i o n
D-ZFK 2.5-TWIN
D-ZFKD 2.5-MT
D-ZFKK 2.5-MT
D-ZFK 4
FBRI 10-5N
FBSTB 2-5
FBSTB 3-5
FBSTB 10-5
ATP-ZFKKB 4
ZBFM 5
ZBFM 6
ZB 5
3002801
3024216
3024151
3002791
2770642
3024643
3024656
3024724
3005772
...
...
...
End cover, gray, 2 mm wide
Fixed Bridge, 10 Position, Breakable
Plug-in bridge for term.center,
can be labeled
Partition plate, for separation of terminal block
groups, 2 mm thick
Marker sheets, flat, for labeling outer grooves
(order data, see “Accessories for Terminal
Blocks”)
Marker strips for term. center & plug-in bridges
(order data, see “Accessories for Terminal
Blocks”)
For Terminal Blocks
ZFK 2.5-MT
ZFDK 2.5-MT
ZFKK 2.5-MT
ZFK 4-TG
ZFK 2.5-MT, ZFKK 2.5-MT
ZFK 2.5-MT, ZFKK 2.5-MT
ZFK 2.5-MT, ZFKK 2.5-MT
ZFK 2.5-MT, ZFKK 2.5-MT
ZDMTK 2.5, ZDMTK 2.5-TWIN
ZFK 2.5-MT, ZFDK 2.5-MT, ZFKK 2.5-MT
ZDMTK 2.5, ZDMTK 2.5-TWIN, ZFK 4-TG
ZFK 2.5-MT, ZFDK 2.5-MT, ZFKK 2.5-MT
0.55
0.57
0.59
0.54
5.52
0.62
1.15
4.55
0.55
8.55
8.55
0.91
E a c h
ZFK 2.5-MT
ZFDK 2.5-MT
ZFKK 2.5-MT
ZDMTK 2.5
ZDMTK 2.5-TWIN
ZFK 4-TG
Accessories
1752
Benjamin Franklin is the first to define positive and negative electrical charges. Lacking terminology, he invents new words such
as positive, negative, battery, condenser, charge, discharge, electrical shock, electrician, armature, brush and conductor.
ZFK 2.5-MT ZDMTK 2.5-TWIN ZDMTK 2.5 ZFK 4-TG Approvals: (ZFDK 2.5-MT, ZFK 4-TG); (ZFK 2.5-MT)
*ZFKK 2.5-MT upper level 16 A, lower level 26 A
2-pos.
3-pos.
10-pos
Spring Cage Initiator/Actuator Terminal Blocks
The ZDIK wires 3-conductor initiators on 3-levels. The lower level can be used to connect the +or ground
potentials and the middle level connects the -potential. Once power is fed in, it is distributed in the lower
and middle levels via color-coded plug-in bridges, which can also be labeled. The upper level is used to
loop in the signal lines and can be interconnected using a screw bridge (FBRI) or a plug-in bridge
(FBSTB). The ZVIOK is a 4-level block. It uses the lower level for grounding, the middle levels for +and
-supply, and the upper level for the signal lines. Color: gray. Flammability Rating: UL94V0.
Mounting: NS 35 rails.
5.2
5.2
17.5
17.5
M f r. ’ s Ty p e Order No. D e s c r i p t i o n AW G
26-14
26-14
3006470
3006506 3.18
4.09
3-lvl. Initiator/Actuator term. block
4-lvl. Initiator/Actuator term. block
R a t i n g
250
250
V A W L
73.5
90
Dimensions (mm) E a c h
H (NS 35:7.5/NS 35:15)
48.5/56.5
48.5/56.5
ZDIK 1.5
ZVIOK 1.5
M f r. ’ s Ty p e Order No. D e s c r i p t i o n
D-ZDIK 1.5
D-ZVIOK 1.5
FBRI 10-5N
FBST 2-5
FBST 3-5
FBST 10-5
FBSTB 10-ZDIK GY
FBSTB 10-ZDIK RD
FBSTB 10-ZDIK BU
FBSTB 10-ZDIK GNYE
ZBFM 5
ZB 5
3006593
3006603
2770642
3025066
3025079
3025147
3006535
3006551
3006548
3006771
...
...
End cover, gray, 2 mm wide
End cover, gray, 1 mm wide
Fixed bridge, 10-pos., breakable
Plug-in bridge for term.center, can
be labeled
Plug-in bridge, color-coded
10-pos., can be labeled
Marker sheet, flat, for labeling outer grooves
(order data, see “Accessories for Terminal
Blocks”)
Marker strips for term. center & plug-in
bridges (order data, see “Accessories for
Terminal Blocks”)
For Terminal Blocks
ZDIK 1.5
ZVIOK 1.5
ZDIK 1.5, ZVIOK 1.5
ZDIK 1.5, ZVIOK 1.5
ZDIK 1.5, ZVIOK 1.5
ZDIK 1.5, ZVIOK 1.5
ZDIK 1.5, ZVIOK 1.5
0.88
0.93
5.50
0.59
1.10
4.35
1.77
1.77
1.77
1.77
8.55
.91
E a c h
Accessories
2-pos.
3-pos.
10-pos.
gray
red
blue
green-yellow
CLIPLINE Spring Cage Terminal Blocks
Spring Cage Fuse Terminal Blocks with Disconnect Lever
8.2
8.2
400
400
M f r. ’ s Ty p e Order No. D e s c r i p t i o n AW G
20-10
20-10
3025451
3025367
3025370
3025464
3025383
3025396
5.72
14.61
14.10
6.75
16.49
15.19
Fuse term. block for 5 x 20 mm fuses
As above, except w/24 V light indicator
As above, except with 250 V light indicator
Fuse term. block for 6.3 x 32 fuses
As above, except w/24 V light indicator
As above, except w/250 V light indicator
R a t i n g
6.3
6.3
V * A * W L
82
82
Dimensions (mm) E a c h
H (NS 35:7.5/NS 35:15)
65.5/73
65.5/73
Spring cage fuse terminal blocks from Phoenix Contact satisfy two important basic tasks of connection systems.
First, they hold fuses and secondly, they take on the task of power distribution using fixed bridges. Each block
features a hinged disconnect lever for quick and safe fuse exchanges. These terminal blocks are available for
either 5 x 20 or 6.3 x 32 mm fuses, and a light indicator option which glows when the fuse is blown. Color: black.
Flammability Rating: UL94V0. Mounting: NS 35 rails.
M f r. ’ s Ty p e Order No. D e s c r i p t i o n
ZBFM 8 ... Marker sheet, flat, for labeling marker grooves
(order data, see “Accessories for Terminal
Blocks”)
For Terminal Blocks
Fits all the terminal blocks above 8.55
E a c h
ZFK 4-HESI (5 X 20)
ZFK 4-HESILED24 (5 X 20)
ZFK 4-HESILA250 (5 X 20)
ZFK 4-HESI (6.3 X 32)
ZFK 4-HESILED24 (6.3 X 32)
ZFK 4-HESIL250 (6.3 X 32)
Accessories
ZFK 4-HESI (5 X 20) ZDK 4-HESI (6.3 X 32)
Accessories For Terminal Blocks
Each ZB marker strip consists of 10 white tear-apart markers which are pushed into the label grooves of the terminal blocks.
Three versions are listed below - unprinted (for use with a marking pen) and consecutive numbers labeled horizontally or verti-
cally. Other available options include colored markers, decade labeling ( 10, 20, 30 - 100), identical numbers, larger 100 piece
sections and custom printing. Call for details on these and other options.
*The current is determined by the fuse; the voltage by the light indicator
Zack (“Quick”) Marking Strips
M f r. ’ s Ty p e Order No. D e s c r i p t i o n
ZB 4: unprinted
ZB 4, LGS: 1-10
ZB 4, QR: 1-10
ZB 5: unprinted
ZB 5, LGS: 1-10
ZB 5, QR: 1-10
ZB 6: unprinted
ZB 6, LGS: 1-10
ZB 6, QR: 1-10
ZB 8: unprinted
ZB 8, LGS: 1-10
ZB 8, QR: 1-10
ZB 10: unprinted
ZB 10, LGS: 1-10
ZB 10, QR: 1-10
0805001
0805739
0805807
1050004
1050017
1050020
1051003
1051016
1051029
1052002
1052015
1052028
1053001
1053014
1053027
10 pc. marker strip, unprinted
10-pc. marker strip, labeled horizontally, w/consecutive numbers 1-10, etc. (specify*)
As above, except labeled vertically
10 pc. marker strip, unprinted
10-pc. marker strip, labeled horizontally, w/consecutive numbers 1-10, etc. (specify*)
As above, except labeled vertically
10 pc. marker strip, unprinted
10-pc. marker strip, labeled horizontally, w/consecutive numbers 1-10, etc. (specify*)
As above, except labeled vertically
10 pc. marker strip, unprinted
10-pc. marker strip, labeled horizontally, w/consecutive numbers 1-10, etc. (specify*)
As above, except labeled vertically
10 pc. marker strip, unprinted
10-pc. marker strip, labeled horizontally, w/consecutive numbers 1-10, etc. (specify*)
As above, except labeled vertically
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
P e r
S t r i p
For Te r m .
Wi d t h
4.2 mm
5.2 mm
6.2 mm
8.2 mm
10.2 mm
*Specify consecutive numbers. For example: ZB 4, LGS: 1-10 (or ZB 4, QR: 1-10) ZB 4 ZB 4, LGS: 1-20 etc. up to ZB 4, LGS: 991-1000
Zack (“Quick”) Marking Sheets
Each ZBFM marker sheet consists of 50, 100 or 120 white tear-apart markers for marking terminal blocks and small-
er modules with marker grooves. Three versions are listed below: unprinted for use with a marking pen: with con-
secutive numbers (1-50, 1-100 or 1-120) labeled horizontally: and with 10 identical strips of consecutive numbers (ie
1-10, 11-20, etc.). Special marker sheets are also available per customer specifications. Call for details.
M f r. ’ s Ty p e Order No. D e s c r i p t i o n
ZBFM 4/WH: UNPRINTED
ZBFM 4/WH, LGS: 1-100
ZBFM 4/WH, LGS: 1-10
ZBFM 5/WH: UNPRINTED
ZBFM 5/WH, LGS: 1-120
ZBFM 5/WH, LGS: 1-12
ZBFM 6/WH: UNPRINTED
ZBFM 6/WH, LGS: 1-100
ZBFM 6/WH, LGS: 1-10
ZBFM 8/WH: UNPRINTED
ZBFM 8/WH,LGS: 1-50
ZBFM 8/WH, LGS: 1-5
0803579
0800268
0803582
0803595
0800271
0803605
0803618
0800284
0803621
0800734
0804918
0804921
100-pc. marker sheet, unprinted
100-pc. marker sheet, labeled horizontally w/consecutive number 1-100
As above, except w/10 identical strips of consecutive numbers 1-10, etc. Specify
120-pc. marker sheet, unprinted
120-pc. marker sheet, labeled labeled horizontally, w/consecutive numbers 1-120
As above, except w/10 identical strips of consecutive numbers 1-12, etc. Specify
100-pc. marker sheet, unprinted
100-pc. marker sheet labeled horizontally w/consecutive numbers 1-100
As above, except w/10 identical strips of consecutive numbers 1-10, etc. Specify
50-pc. marker sheet, unprinted
50-pc. marker sheet, labeled horizontally w/consecutive numbers 1-50
As above, except w/10 identical strips of consecutive numbers 1-5, etc. Specify
8.55
8.55
8.55
8.55
8.55
8.55
8.55
8.55
8.55
8.55
8.55
8.55
P e r
S h e e t
For Te r m .
W i d t h
4.2 mm
5.2 mm
6.2 mm
8.2 mm
ZBFM 4/ or 6/WH, LGS: 1-10, 11-20, etc. up to 91-100. ZBFM 5/WH, LGS: 1-12, 13-24, etc. up to 109-120. ZBFM 8/WH, LGS: 1-5, 6-10, etc. up to
46-50.
Accessories for CLIPLINE Terminal Blocks
Marker Pens
For manually labeling unprinted marker strips and
sheets. Smear-proof and waterproof. Black
Mfr.’s Type
M-PEN
M-PEN 0-8
Order No.
1051993
1051728
Tip Size
0.5 mm
0.8 mm
Each
9.03
9.03
M f r. ’ s Ty p e Order No. Fits Block E a c h
0.89
0.72
1.08
1.11
0.91
1.02
0.76
1.45
0.54
3008096
3003224
2778521
2771065
1413272
1413285
1413227
0308223
0321226
UK35
UK1.5, UK2.5N,UK3N, UK5N,
UK6N, UK10N, UK16N, UK4-TG
UKK3, UKK5
UKKB3, UKKB5
DIK1.5
DIKD1.5, DOK1.5
MBK3/E-Z, MBK6/E, MBK5/E
URTK/S-BEN
URTK/SS
TP-UK 35
ATP-UK
ATP-UKK 3/5
ATP-UKKB 3
ATP-DIK 1.5
ATP-DIKD 1.5
ATS-MBK
ATS-ATK-BEN
ATP-URTK/SS
Partition Plates
ATP partition plates extend on all sides above the
terminal profile for a clear visual and electrical sep-
aration of terminal block groups.
TS Separating Plates
These plates guarantee electric and visual isolation in
the cases of bridges in the terminal center which are in
direct contact with one another. It’s designed to be
inserted later and snap locks into place. A separation
plate should be used on both sides for all bridges in
the terminal center.
M f r. ’ s Ty p e Order No. Fits Block E a c h
0.17
0.23
0.84
0.44
2770215
1302215
0308210
0321213
UK2.5N,UKK3, UKKB3, UKK5,
UKKB5,UDK3, UDK4, MBK3/E-7,
MBK6/E MBK5/E, MBKKB2.5,
MZFKKB1.5, ZDIK1.5, ZVIOK1.5
UK3N, UK5N, UK6N, UK10N,
UK16N, UK35, UK3-TWIN, UK5-
TWIN
URTK/S-BEN
URTK/SS
TS-KK 3
TS-K
TS-RTK-BEN
TS-URTK/SS
Mounting Rails
The design of these mounting rails complies with
European standard EN 50045 (NS 15) and EN 50022
(NS 35), and feature outstanding accuracy and sur-
face tempering. The steel rails are galvanized and yel-
low chromated. A line of dots is marked along the cen-
ter of the rail to simplify drilling of mounting holes.
Length: 2m (6’6”).
M f r. ’ s Ty p e Order No. Dimensions (mm) E a c h
9.00
10.00
11.00
12.00
22.00
23.00
1401695
1401682
0801681
0801733
1201714
1201730
NS 15 UNPERFORATED
NS 15 PERFORATED
NS 35/7.5 UNPERFORATED
NS 35/7.5 PERFORATED
NS 35/15 UNPERFORATED
NS 35/15 PERFORATED
15
35
35
5.5
7.5
15
1
1
1.5
W H T
End Brackets for Mounting Rails
E/UK
Mounts to end of terminal block assembly to prevent
blocks from being pushed along mounting rail. Flammability
Rating: UL94V0. Color: gray
M f r. ’s Ty p e O r d e r
N o . Description E a c h
.59
.83
.88
.69
.86
1421659
1201442
1201413
3022218
0800886
Snaps on NS 15 mounting rail, 6 mm wide.
For NS 32 or NS 35 rail, 9.5 mm wide.
As above, except for 2 and 3-level blocks.*
Toolless for NS 35 rail, 9.5 mm wide
One screw for NS 32 or NS 35 rail, 9.5mm
wide.
E/MK 1
E/UK
E/UK 1
Clipfix 35
E/NS 35N
*10 mm wide
Reducing plug
Reducing plug for connecting a 4 mm
test plug to a 2.3 mm test plug socket. Gray.
Mfr.’s Type RPS (Order No. 0201647)... 5.45 Each
Test Plug Sockets
4 mm test plug sockets for
UK-terminal blocks.
Material: Silver-plated brass
E/UK
M f r. ’ s Ty p e Order No. Fits Block E a c h
.32
.49
.85
0601292
0303299
0205290
UK2.5N, UK3N, UK5N
UK6N, UK10N, UK16N
UK35
PSB 3/10/4
PSB 4/7/6
PSB 6/5/6
Stripping Tools
These stripping tools "automatically" adjust to the proper AWG depth. QUICK-
WIREFOX 6 has an AWG range of 30-10 and QUICK-WIREFOX 16 has a
range of AWG 10-6.
50.00
93.00
22.00
32.00
QUICK-WIREFOX 6
QUICK-WIREFOX 16
QUICK-WIREFOX 6 EM
QUICK-WIREFOX 16 EM
1204384
1205105
1204371
1204944
Mfr.’s Type Order No. Description Each
Stripping Tool, AWG 30-10
Stripping Tool, AWG 10-6
Repl. Blade for WIREFOX 6
Repl. Blade for WIREFOX 16
QUICK-WIREFOX 6 QUICK-WIREFOX 16
Tempered steel to ensure high cutting efficiency over
a long period of time. Conductors can be cut easily
and cleanly due to the specific design of the blades.
For copper and aluminum conductors and fixed
bridges FBI10-6, FBI10-8, FBI10-10, FBI10-12.
Cutting capacity (solid strand/multi-strand/fine
strand): 10/8/4 AWG.
41.00
Cutfox FB 1205985
Mfr.’s Type Order No. Length Each
175mm (6.9")
Cable Cutter
Ideal for ZFK and ST Series spring cage terminal
blocks.
l Ergonomically designed
l Fully insulated blade shaft
l Flat tips
SZF0-0.4X2.5
SZF1-0.6X3.5
SZF2-0.8X4.0
1204504
1204517
1204520
Mfr.’s Type Order No. Blade Size (mm) Each
0.4Tx 2.5W x 75
0.6T x 3.5W x 100
0.8T x 4.0W x 100
Screwdrivers for Spring Cage Terminal Blocks
Length (mm)
160
180
230
1907
The word TELEVISION first appeared In print in
SCIENTIFIC AMERICAN Magazine.
NS 35/7.5
6.00
7.00
8.00
Printed Circuit Terminal Blocks
M f r. ’ s Ty p e Order No. Dimensions (mm) E a c h
.64
.96
1.28
1.59
1.92
2.23
2.55
2.88
3.19
3.15
3.84
.71
1.06
1.40
1.76
2.11
2.82
2.46
3.17
3.51
3.87
4.22
.54
.82
1.09
1.36
1.63
1.91
2.17
2.45
2.72
2.99
3.26
.63
.95
1.26
1.57
1.89
2.21
2.52
2.84
3.16
3.47
3.78
.64
.97
1.30
2.58
3.23
3.88
.67
1.01
1.35
1.68
2.02
2.36
2.69
3.03
3.36
3.69
4.03
1.02
1.53
2.04
4.55
6.24
1727010
1727023
1727036
1727049
1727052
1727065
1727078
1727081
1727094
1727104
1727117
1728284
1728297
1728307
1728310
1728323
1728336
1728349
1728352
1728365
1728378
1728381
1729128
1729131
1729144
1729157
1729160
1729173
1729186
1729199
1729209
1729212
1729225
1869211
1869224
1869237
1869240
1869253
1869266
1869279
1869282
1869295
1869305
1869318
1715721
1715734
1715747
1715789
1715802
1715828
1733570
1733583
1733596
1733606
1733619
1733622
1733635
1733648
1733651
1733664
1733677
1711725
1711738
1712805
1712708
1714308
MKDS1/2-3.81
MKDS1/3-3.81
MKDS1/4-3.81
MKDS1/5-3.81
MKDS1/6-3.81
MKDS1/7-3.81
MKDS1/8-3.81
MKDS1/9-3.81
MKDS1/10-3.81
MKDS1/11-3.81
MKDS1/12-3.81
SMKDS1/2-3.81
SMKDS1/3-3.81
SMKDS1/4-3.81
SMKDS1/5-3.81
SMKDS1/6-3.81
SMKDS1/7-3.81
SMKDS1/8-3.81
SMKDS1/9-3.81
SMKDS1/10-3.81
SMKDS1/11-3.81
SMKDS1/12-3.81
MKDSN1.5/2-5.08
MKDSN1.5/3-5.08
MKDSN1.5/4-5.08
MKDSN1.5/5-5.08
MKDSN1.5/6-5.08
MKDSN1.5/7-5.08
MKDSN1.5/8-5.08
MKDSN1.5/9-5.08
MKDSN1.5/10-5.08
MKDSN1.5/11-5.08
MKDSN1.5/12-5.08
SMKDSN1.5/2-5.08
SMKDSN1.5/3-5.08
SMKDSN1.5/4-5.08
SMKDSN1.5/5-5.08
SMKDSN1.5/6-5.08
SMKDSN1.5/7-5.08
SMKDSN1.5/8-5.08
SMKDSN1.5/9-5.08
SMKDSN1.5/10-5.08
SMKDSN1.5/11-5.08
SMKDSN1.5/12-5.08
MKDS1.5/2-5.08
MKDS1.5/3-5.08
MKDS1.5/4-5.08
MKDS1.5/8-5.08
MKDS1.5/10-5.08
MKDS1.5/12-5.08
SMKDSP1.5/2-5.08
SMKDSP1.5/3-5.08
SMKDSP1.5/4-5.08
SMKDSP1.5/5-5.08
SMKDSP1.5/6-5.08
SMKDSP1.5/7-5.08
SMKDSP1.5/8-5.08
SMKDSP1.5/9-5.08
SMKDSP1.5/10-5.08
SMKDSP1.5/11-5.08
SMKDSP1.5/12-5.08
MKDS3/2-5.08
MKDS3/3-5.08
MKDS3/4-5.08
MKDS3/8-5.08
MKDS3/12-5.08
7.3
10
8.1
12
9.8
13.4
11.2
8.5
9.5
10
11
13.8
15.3
18
7.61
11.42
15.23
19.04
22.85
26.66
30.47
34.28
38.09
41.89
45.69
7.61
11.42
15.23
19.04
22.85
26.66
30.47
34.28
38.09
41.89
45.69
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
11.16
16.24
21.33
26.40
31.48
36.56
41.64
46.72
51.80
56.88
61.96
10.16
15.24
20.32
40.64
50.80
60.96
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
10.16
15.24
20.32
40.64
60.96
W H L
Multi-Position PCB Terminal Blocks
These terminal blocks are fully enclosed and feature screw connections and nickel-plated copper alloy clamping parts. Both mini and standard versions are avail-
able, with straight or angled connections. The four standard versions also feature interlocking design for perfect alignment and pitch retention. Model SMKDSP1.5
incorporates test connections for 2.3mm test plugs. Color: green (black or gray available). Approvals: ULRecognized, CSACertified.
MKDS 1
SMKDS 1
MKDSN 1.5
SMKDSN 1.5
MKDS 1.5
SMKDSP1.5
MKDS 3
2
3
4
5
6
7
8
9
10
11
12
2
3
4
5
6
7
8
9
10
11
12
2
3
4
5
6
7
8
9
10
11
12
2
3
4
5
6
7
8
9
10
11
12
2
3
4
8
10
12
2
3
4
5
6
7
8
9
10
11
12
2
3
4
8
12
No.of Pos.
Mini PC terminal block
W/straight connections
Pitch: 3.81 mm
Specifications:
UL: 300 V@ 10 A, 30-16 AWG
IEC: 100 V @ 12 A, 26-16 AWG
Above, except with
55oangled connections
Standard PC terminal block
W/straight connections
Pitch: 5.08 mm
Specifications:
UL: 300 V @ 10 A, 30-14 AWG
IEC: 250 V @ 13.5 A, 26-16 AW G
As above, except with
55oangled connections
Standard PC terminal block
W/straight connections
Pitch: 5.08 mm
Specifications:
UL: 300 V @ 10 A, 30-14 AWG
IEC: 250 V @ 22 A, 26-14 AW G
As above, except with
35oangled connections
and test connections
Standard PC terminal block
W/straight connections
Pitch: 5.08 mm
Specifications:
UL: 300 V @ 15 A, 30-12 AWG
IEC: 250 V @ 28 A, 24-12 AW G
Note
To label, optional self-adhesive marker cards are available: SK3.81/2.8.. .for blocks with 3.81 mm pitch or SK5.08/3.8... for blocks with 5.08 mm pitch. To order,
see “Accessories”.
1830
Joseph Henry discovers self-inductance, an efficient electromagnet. The unit of inductance, the Henry, is named for Henry in 1893.
D e s c r i p t i o n
COMBICON Plug-In Connectors
M f r. ’s Ty p e Order No. Dimensions (mm) E a c h
1803578
1803581
1803594
1803604
1803617
1803620
1803633
1803646
1803659
1803662
1803675
1803688
1803691
1803701
1803714
1803277
1803280
1803293
1803303
1803316
1803329
1803332
1803345
1803358
1803361
1803374
1803387
1803390
1803400
1803413
1803426
1803439
1803442
1803455
1803468
1803471
1803484
1803497
1803507
1803510
1803523
1803536
1803549
1803552
1803565
1734634
MC1.5/2-ST-3.81
MC1.5/3-ST-3.81
MC1.5/4-ST-3.81
MC1.5/5-ST-3.81
MC1.5/6-ST-3.81
MC1.5/7-ST-3.81
MC1.5/8-ST-3.81
MC1.5/9-ST-3.81
MC1.5/10-ST-3.81
MC1.5/11-ST-3.81
MC1.5/12-ST-3.81
MC1.5/13-ST-3.81
MC1.5/14-ST-3.81
MC1.5/15-ST-3.81
MC1.5/16-ST-3.81
MC1.5/2-G-3.81
MC1.5/3-G-3.81
MC1.5/4-G-3.81
MC1.5/5-G-3.81
MC1.5/6-G-3.81
MC1.5/7-G-3.81
MC1.5/8-G-3.81
MC1.5/9-G-3.81
MC1.5/10-G-3.81
MC1.5/11-G-3.81
MC1.5/12-G-3.81
MC1.5/13-G-3.81
MC1.5/14-G-3.81
MC1.5/15-G-3.81
MC1.5/16-G-3.81
MCV1.5/2-G-3.81
MCV1.5/3-G-3.81
MCV1.5/4-G-3.81
MCV1.5/5-G-3.81
MCV1.5/6-G-3.81
MCV1.5/7-G-3.81
MCV1.5/8-G-3.81
MCV1.5/9-G-3.81
MCV1.5/10-G-3.81
MCV1.5/11-G-3.81
MCV1.5/12-G-3.81
MCV1.5/13-G-3.81
MCV1.5/14-G-3.81
MCV1.5/15-G-3.81
MCV1.5/16-G-3.81
CP-MSTB
15.5 11.1
8.41
12.22
16.03
19.30
23.65
27.46
31.27
35.08
38.89
42.70
46.51
50.32
54.13
57.94
61.75
9.01
12.82
16.63
20.44
24.25
28.06
31.87
35.68
39.49
43.30
47.11
50.92
54.73
58.54
62.35
9.01
12.82
16.63
20.44
24.25
28.06
31.87
35.68
39.49
43.30
47.11
50.92
54.73
58.54
62.35
W H L
MINI-COMBICON Plugs and Headers
The Mini-Combicon Series is a low profile connector with a generous wire range and is available from 2 to 20 positions. It features a unique design where each
plug can be keyed specifically to a corresponding header to prevent mismatched connections in close proximity. The keying is accomplished by the combination of
cutting away molded elements on the plugs, and inserting optional key tabs in the corresponding grooves of the header. Color: green (black or gray available).
Approvals: ULRecognized, CSACertified. Optional self-adhesive marker cards SK3.81/2.8... are used for labeling. To order, see “Accessories”.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
No. of Pos.
MINI-COMBICON plug w/straight
plug-in
Pitch: 3.81 mm
Specifications:
UL: 300 V @ 8 A, 30-14 AWG
IEC: 160 V @ 8 A, 28-16 AW G
MINI-COMBICON header
w/straight plug-in
Pitch: 3.81mm
Specifications:
UL: 300 V @ 8 A
IEC: 160 V @ 8 A
MINI-COMBICON header w/ verti-
cal plug-in
Pitch: 3.81 mm
Specifications:
UL: 300 V @ 8 A
IEC: 160 V @ 8 A
D e s c r i p t i o n
Insertable key tabs, red (100 piece package). Inserts into the slots on
Mini-Combicon headers.
COMBICON Plugs and Headers
Standard COMBICON plugs
and headers are available in 2
to 24 positions with and without
screw flanges and in 5.08 mm
pitch (5.0 mm pitch also avail-
able). They feature generous
connection space and higher
voltage and current ratings
than the MINI-COMBICON
series. Plugs with 2.3 mm test
connections are also available
(call for details). Color: Green
(black or gray availble on
request). Approvals: ULrecog-
nized, CSAcertified. Optional
self-adhesive marker cards
SK5.08/3.8... are used for
labeling. To order, see
“Accessories”.
MC1.5/...-ST-...
MC1.5/...-G-...
MCV1.5...-G-...
M f r. ’s Ty p e Order No. Dimensions (mm) E a c h
1.04
1.55
2.06
2.57
3.09
3.60
4.11
4.64
5.15
5.66
6.17
7.58
8.17
8.75
9.33
9.91
10.50
11.09
11.67
12.25
12.83
13.41
13.99
1757019
1757022
1757035
1757048
1757051
1757064
1757077
1757080
1757093
1757103
1757116
1757129
1757132
1757145
1757158
1757161
1757174
1757187
1757190
1757200
1757213
1757226
1757239
MSTB2.5/2-ST-5.08
MSTB2.5/3-ST-5.08
MSTB2.5/4-ST-5.08
MSTB2.5/5-ST-5.08
MSTB2.5/6-ST-5.08
MSTB2.5/7-ST-5.08
MSTB2.5/8-ST-5.08
MSTB2.5/9-ST-5.08
MSTB2.5/10-ST-5.08
MSTB2.5/11-ST-5.08
MSTB2.5/12-ST-5.08
MSTB2.5/13-ST-5.08
MSTB2.5/14-ST-5.08
MSTB2.5/15-ST-5.08
MSTB2.5/16-ST-5.08
MSTB2.5/17-ST-5.08
MSTB2.5/18-ST-5.08
MSTB2.5/19-ST-5.08
MSTB2.5/20-ST-5.08
MSTB2.5/21-ST-5.08
MSTB2.5/22-ST-5.08
MSTB2.5/23-ST-5.08
MSTB2.5/24-ST-5.08
18.2 15
10.16
15.24
20.36
25.40
30.48
35.56
40.14
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
86.36
91.44
96.52
101.60
106.68
111.76
116.84
121.92
W H L
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
No. of Pos.
COMBICON plug w/straight plug-in
Pitch: 5.08 mm
Specifications:
UL: 300 V @ 10 A, 30-12 AWG
IEC: 250 V @ 12 A, 24-12 AW G
D e s c r i p t i o n
COMBICON Plugs and
Headers (Continued on
next page)
9.2
7.25
11.1
9.2
1.21
1.81
2.41
3.04
3.62
4.22
4.82
5.43
6.03
6.63
7.23
7.84
8.44
9.04
9.64
.42
.63
.84
1.05
1.26
1.47
1.67
1.89
2.10
2.30
2.52
2.73
2.93
3.14
3.36
.42
.63
.84
1.05
1.26
1.47
1.67
1.89
2.10
2.30
2.52
2.73
2.89
3.14
3.36
.05
COMBICON Plug-In Connectors
M f r. ’ s Ty p e Order No. Dimensions (mm) E a c h
1.32
1.96
2.60
3.23
3.88
4.52
5.16
5.79
6.44
7.08
7.72
8.35
9.00
9.64
10.26
10.91
11.56
12.20
12.84
1.19
1.77
2.37
2.96
3.56
4.15
4.74
5.34
5.92
6.52
7.11
8.73
9.40
10.07
10.74
11.41
12.09
12.76
13.42
14.10
14.77
15.44
16.12
1.19
1.77
2.37
2.96
3.56
4.15
4.74
5.34
5.92
6.52
7.11
8.73
9.40
10.07
10.74
11.41
12.09
12.76
13.42
14.10
14.77
15.44
16.12
.36
.54
.72
.90
1.07
1.25
1.43
1.61
1.79
1.97
2.15
2.64
2.85
3.04
3.24
3.45
3.65
3.86
4.06
4.26
4.47
4.66
4.88
1777989
1777992
1778001
1778014
1778027
1778030
1778043
1778056
1778069
1778072
1778085
1778098
1778108
1778111
1778124
1778137
1778140
1778153
1778166
1792249
1792252
1792265
1792278
1792281
1792294
1792304
1792317
1792320
1792333
1492346
1792359
1792362
1792375
1792388
1792391
1792401
1792414
1792427
1792430
1792443
1792456
1792469
1792757
1792760
1792773
1792786
1792799
1792809
1792812
1792825
1792838
1792841
1792854
1792867
1792870
1792883
1792896
1792906
1792919
1792922
1792935
1792948
1792951
1792964
1792977
1759017
1759020
1759033
1759046
1759059
1759062
1759075
1759088
1759091
1759101
1759114
1759127
1759130
1759143
1759156
1759169
1759172
1759185
1759198
1759208
1759211
1759224
1759237
MSTB2.5/2-STF-5.08
MSTB2.5/3-STF-5.08
MSTB2.5/4-STF-5.08
MSTB2.5/5-STF-5.08
MSTB2.5/6-STF-5.08
MSTB2.5/7-STF-5.08
MSTB2.5/8-STF-5.08
MSTB2.5/9-STF-5.08
MSTB2.5/10-STF-5.08
MSTB2.5/11-STF-5.08
MSTB2.5/12-STF-5.08
MSTB2.5/13-STF-5.08
MSTB2.5/14-STF-5.08
MSTB2.5/15-STF-5.08
MSTB2.2/16-STF-5.08
MSTB2.5/17-STF-5.08
MSTB2.5/18-STF-5.08
MSTB2.5/19-STF-5.08
MSTB2.5/20-STF-5.08
MVSTBR2.5/2-ST-5.08
MVSTBR2.5/3-ST-5.08
MVSTBR2.5/4-ST-5.08
MVSTBE2.5/5-ST-5.08
MVSTBR2.5/6-ST-5.08
MVSTBR2.5/7-ST-5.08
MVSTBE2.5/8-ST-5.08
MVSTBR2.5/9-ST-5.08
MVSTBR2.5/10-ST-5.08
MVSTBR2.5/11-ST-5.08
MVSTBR2.5/12-ST-5.08
MVSTBR2.5/13-ST-5.08
MVSTBR2.5/14-ST-5.08
MVSTBR2.5/15-ST-5.08
MVSTBR2.5/16-ST-5.08
MVSTBR2.5/17-ST-5.08
MVSTBR2.5/18-ST-5.08
MVSTBR2.5/19-ST-5.08
MVSTBR2.5/20-ST-5.08
MVSTBR2.5/21-ST-5.08
MVSTBR2.5/22-ST-5.08
MVSTBR2.5/23-ST-5.08
MVSTBR2.5/24-ST-5.08
MVSTBW2.5/2-ST-5.08
MVSTBW2.5/3-ST-5.08
MVSTBW2.5/4-ST-5.08
MVSTBW2.5/5-ST-5.08
MVSTBW2.5/6-ST-5.08
MVSTBW2.5/7-ST-5.08
MVSTBW2.5/8-ST-5.08
MVSTBW2.5/9-ST-5.08
MVSTBW2.5/10-ST-5.08
MVSTBW2.5/11-ST-5.08
MVSTBW2.5/12-ST-5.08
MVSTBW2.5/13-ST-5.08
MVSTBW2.5/14-ST-5.08
MVSTBW2.5/15-ST-5.08
MVSTBW2.5/16-ST-5.08
MVSTBW2.5/17-ST-5.08
MVSTBW2.5/18-ST-5.08
MVSTBW2.5/19-ST-5.08
MVSTBW2.5/20-ST-5.08
MVSTBW2.5/21-ST-5.08
MVSTBW2.5/22-ST-5.08
MVSTBW2.5/23-ST-5.08
MVSTBW2.5/24-ST-5.08
MSTB2.5/2-G-5.08
MSTB2.5/3-G-5.08
MSTB2.5/4-G-5.08
MSTB2.5/5-G-5.08
MSTB2.5/6-G-5.08
MSTB2.5/7-G-5.08
MSTB2.5/8-G-5.08
MSTB2.5/9-G-5.08
MSTB2.5/10-G-5.08
MSTB2.5/11-G-5.08
MSTB2.5/12-G-5.08
MSTB2.5/13-G-5.08
MSTB2.5/14-G-5.08
MSTB2.5/15-G-5.08
MSTB2.5/16-G-5.08
MSTB2.5/17-G-5.08
MSTB2.5/18-G-5.08
MSTB2.5/19-G-5.08
MSTB2.5/20-G-5.08
MSTB2.5/21-G-5.08
MSTB2.5/22-G-5.08
MSTB2.5/23-G-5.08
MSTB2.5/24-G-5.08
18.2
12.6
12.6
12
15
26
26
8.6
19.96
25.04
30.12
35.30
40.28
45.36
50.44
55.52
60.60
65.68
70.76
75.84
80.92
86.00
91.08
96.16
101.24
106.32
111.40
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
86.36
91.44
96.52
101.60
106.68
111.76
116.84
121.92
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
86.36
91.44
96.52
101.60
106.68
111.76
116.84
121.92
10.16
15.24
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
86.36
91.44
96.52
101.60
106.68
111.76
116.84
121.92
W H L
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
No. of Pos.
COMBICON plug w/straight plug-in
and screw flanges
Pitch: 5.08 mm
Specifications:
UL: 300 V @ 10 A, 30-12 AWG
IEC: 250 V @ 12 A, 24-12 AW G
Note: Length includes screw
flanges
COMBICON plug w/plug-in direc-
tion vertical to the conductor axis
and connection point facing the
smooth wall of the header.
Pitch: 5.08 mm
Specifications:
UL: 300 V @ 10 A, 30-12 AWG
IEC: 250 V @ 12 A, 24-12 AW G
Note: Can be key-coded using
optional coding tabs CP-MSTB (for
the plug) and CR-MSTB (for the
corresponding header). To order,
see “Accessories”.
As above, except connection point
faces the rippled wall of the head-
er.
Pitch: 5.08 mm
Specifications:
UL: 300 V @ 10 A, 30-12 AWG
IEC: 250 V @ 12 A, 24-12 AW G
Note: Can be key-coded using
optional coding tabs CP-MSTB (for
the plug) and CR-MSTB (for the
corresponding header). To order,
see “Accessories”.
C O M B I C O N h e a d e r, open end
w/right angled contact/solder pins.
Pitch: 5.08 mm
Specifications:
UL: 300 V @ 10 A
IEC: 250 V @ 12 A
D e s c r i p t i o n
MSTB2.5/...-STF
MVSTBR2.5/...-ST
MVSTBW2.5/...-ST
COMBICON Plugs and Headers (Continued from previous page)
MSTB2.5/...-G
COMBICON Plugs and Headers (Continued on next page)
COMBICON Plug-In Connectors
M f r. ’ s Ty p e Order No. Dimensions (mm) E a c h
.36
.54
.72
.90
1.07
1.25
1.43
1.61
1.71
1.97
2.15
2.64
2.85
3.04
3.24
3.45
3.65
3.86
4.06
4.26
4.47
4.66
4.88
1.41
1.63
1.85
2.06
2.28
2.50
2.71
2.94
3.15
3.37
3.59
3.80
4.02
4.23
4.46
4.90
5.11
5.32
.36
.54
72
.90
1.07
1.23
1.43
1.61
1.79
1.97
2.15
2.64
2.85
3.04
3.24
3.45
3.65
3.86
4.06
4.26
4.47
4.66
4.88
.36
.54
.72
.90
1.07
1.23
1.43
1.61
1.79
1.97
2.15
2.64
2.85
3.04
3.24
3.45
3.65
3.86
4.06
4.26
4.47
4.66
4.88
1757242
1757255
1757268
1757271
1757284
1757297
1757307
1757310
1757323
1757336
1757349
1757352
1757365
1757378
1757381
1757394
1757404
1757417
1757420
1757433
1757446
1757459
1757462
1776508
1776511
1776524
1776537
1776540
1776553
1776566
1776579
1776582
1776595
1776605
1776618
1776621
1776634
1776647
1776663
1776676
1776689
1758018
1758021
1758034
1758047
1758050
1758063
1758076
1758089
1758092
1758102
1758115
1758128
1758131
1758144
1758157
1758160
1758173
1758186
1758199
1758209
1758212
1758225
1758238
1755736
1755749
1755752
1755765
1755778
1755781
1755794
1755804
1755817
1755820
1755833
1755846
1755859
1755862
1755875
1755888
1755891
1755901
1755914
1755927
1755930
1755943
1755956
MSTBA2.5/2-G-5.08
MSTBA2.5/3-G-5.08
MSTBA2.5/4-G-5.08
MSTBA2.5/5-G-5.08
MSTBA2.5/6-G-5.08
MSTBA2.5/7-G-5.08
MSTBA2.5/8-G-5.08
MSTBA2.5/9-G-5.08
MSTBA2.5/10-G-5.08
MSTBA2.5/11-G-5.08
MSTBA2.5/12-G-5.08
MSTBA2.5/13-G-5.08
MSTBA2.5/14-G-5.08
MSTBA2.5/15-G-5.08
MSTBA2.5/16-G-5.08
MSTBA2.5/17-G-5.08
MSTBA2.5/18-G-5.08
MSTBA2.5/19-G-5.08
MSTBA2.5/20-G-5.08
MSTBA2.5/21-G-5.08
MSTBA2.5/22-G-5.08
MSTBA2.5/23-G-5.08
MSTBA2.5/24-G-5.08
MSTB2.5/2-GF-5.08
MSTB2.5/3-GF-5.08
MSTB2.5/4-GF-5.08
MSTB2.5/5-GF-5.08
MSTB2.5/6-GF-5.08
MSTB2.5/7-GF-5.08
MSTB2.5/8-GF-5.08
MSTB2.5/9-GF-5.08
MSTB2.5/10-GF-5.08
MSTB2.5/11-GF-5.08
MSTB2.5/12-GF-5.08
MSTB2.5/13-GF-5.08
MSTB2.5/14-GF-5.08
MSTB2.5/15-GF-5.08
MSTB2.5/16-GF-5.08
MSTB2.5/18-GF-5.08
MSTB2.5/19-GF-5.08
MSTB2.5/20-GF-5.08
MSTBV2.5/2-G-5.08
MSTBV2.5/3-G-5.08
MSTBV2.5/4-G-5.08
MSTBV2.5/5-G-5.08
MSTBV2.5/6-G-5.08
MSTBV2.5/7-G-5.08
MSTBV2.5/8-G-5.08
MSTBV2.5/9-G-5.08
MSTBV2.5/10-G-5.08
MSTBV2.5/11-G-5.08
MSTBV2.5/12-G-5.08
MSTBV2.5/13-G-5.08
MSTBV2.5/14-G-5.08
MSTBV2.5/15-G-5.08
MSTBV2.5/16-G-5.08
MSTBV2.5/17-G-5.08
MSTBV2.5/18-G-5.08
MSTBV2.5/19-G-5.08
MSTBV2.5/20-G-5.08
MSTBV2.5/21-G-5.08
MSTBV2.5/22-G-5.08
MSTBV2.5/23-G-5.08
MSTBV2.5/24-G-5.08
MSTBVA2.5/2-G-5.08
MSTBVA2.5/3-G-5.08
MSTBVA2.5/4-G-5.08
MSTBVA2.5/5-G-5.08
MSTBVA2.5/6-G-5.08
MSTBVA2.5/7-G-5.08
MSTBVA2.5/8-G-5.08
MSTBVA2.5/9-G-5.08
MSTBVA2.5/10-G-5.08
MSTBVA2.5/11-G-5.08
MSTBVA2.5/12-G-5.08
MSTBVA2.5/13-G-5.08
MSTBVA2.5/14-G-5.08
MSTBVA2.5/15-G-5.08
MSTBVA2.5/16-G-5.08
MSTBVA2.5/17-G-5.08
MSTBVA2.5/18-G-5.08
MSTBVA2.5/19-G-5.08
MSTBVA2.5/20-G-5.08
MSTBVA2.5/21-G-5.08
MSTBVA2.5/22-G-5.08
MSTBVA2.5/23-G-5.08
MSTBVA2.5/24-G-5.08
12
12
8.6
8.6
8.6
8.6
12
12
12.16
17.24
22.32
27.40
32.48
37.56
42.64
47.72
52.80
57.88
62.96
68.04
73.12
78.20
83.28
88.36
93.44
98.52
103.60
108.68
113.76
118.84
123.92
20.32
25.40
30.48
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
86.36
91.44
101.60
106.68
111.76
10.16
15.24
20.22
25.40
30.28
35.56
40.64
45.72
50.80
55.88
60.96
66.04
71.12
76.20
81.28
86.36
91.44
96.52
101.60
106.68
111.76
116.84
121.92
12.16
17.24
22.32
27.40
32.48
37.56
42.64
47.72
52.80
57.88
62.96
68.04
73.12
78.20
83.28
88.36
93.44
98.52
103.60
108.68
113.76
118.84
123.92
W H L
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
19
20
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
No. of Pos.
COMBICON headers with side
panels with right angled
contact/solder pins
Pitch: 5.08 mm
Specifications:
UL: 150 V @ 15 A & 300 V @10 A
IEC: 250 V @ 12A
COMBICON header w/screw
flanges,with right angled
contact/solder pins
Pitch: 5.08 mm
Specifications:
UL: 150 V @ 15 A & 300 V @ 10 A
IEC: 250 V @ 12 A
COMBICON header, open-end,
with vertical plug-in
Pitch: 5.08 mm
Specifications:
UL: 150 V @ 15 A & 300 V @ 10 A
IEC: 250 V @ 12 A
COMBICON header with side
panels,
with vertical plug-in
Pitch: 5.08 mm
Specifications:
UL: 150 V @ 15 A & 300 V @ 10 A
IEC: 250 V @ 12 A
D e s c r i p t i o n
MSTBA2.5/...-G
MSTB2.5/...-GF
MSTBV2.5/...-G
COMBICON Plugs and Headers (Continued from previous page)
MSTBVA2.5/...-G
Power-COMBICON Plugs and Headers
POWER-COMBICON plug with straight
Plug-in
Pitch: 7.62 mm
AWG: 24-10
Rating: 400 V, 20 A
POWER-COMBICON header with
Right angled contact/solder pins
Pitch: 7.62 mm
Rating: 400 V, 20 A
Insertable key tabs (100 piece package). Inserts into the slots
On the POWER-COMBICON plugs and headers.
Double-level COMBICON header, open-
end, with offset levels and right angled
contact/solder pins. Pitch: 5.08 mm
Specifications:
UL: 150 V @ 15 A & 300 V @ 10 A
IEC: 250 V @ 10 A
Optional side element for lateral sealing of MDSTB2.5/...-G
Optional ejector, assembles on each side of MDSTB2.5/...-G
Double-level COMBICON header with
Side panels, without offset levels,
W / right angled contact / solder pins
Pitch: 5.08 mm
Rating: 250 V, 10 A
COMBICON Plug-In Connectors
M f r. ’ s Ty p e Order No. Dimensions (mm) E a c h
1.31
1.96
.25
2.10
2.22
2.79
4.46
5.20
5.94
6.68
7.43
8.17
8.91
9.65
10.39
11.14
11.88
12.63
13.36
14.11
14.85
1762062
1762075
1786679
1806588
1762376
1736713
1762415
1762428
1762431
1762444
1762457
1762460
1762703
1762473
1762486
1762499
1762509
1762512
1762525
1762538
1762680
MDSTB2.5/2-G-5.08
MDSTB2.5/3-G-5.08
MDSTB-SE
MDSTB2.5-AS
MDSTB2.5/3-G1-5.08
MDSTB2.5/4-G1-5.08
MDSTB2.5/6-G1-5.08
MDSTB2.5/7-G1-5.08
MDSTB2.5/8-G1-5.08
MDSTB2.5/9-G1-5.08
MDSTB2.5/10-G1-5.08
MDSTB2.5/11-G1-5.08
MDSTB2.5/12-G1-5.08
MDSTB2.5/13-G1-5.08
MDSTB2.5/14-G1-5.08
MDSTB2.5/15-G1-5.08
MDSTB2.5/16-G1-5.08
MDSTB2.5/17-G1-5.08
MDSTB2.5/18-G1-5.08
MDSTB2.5/19-G1-5.08
MDSTB2.5/20-G1-5.08
22.32*
22.32*
22
23.5
23.5
28.5
12.70
17.79
17.24
22.32
32.48
37.56
42.64
47.72
52.80
57.88
62.96
68.04
73.12
78.20
83.28
88.36
93.44
98.52
103.60
W H L
2
3
3
4
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
No.
of Pos. D e s c r i p t i o n
MDSTB2.5/...G
MDSTB2.5/...G1
Double-Level COMBICON Headers
The MDSTB2.5/...-G-double-level headers are offset by 10 mm in the plug-in direction and by half a pitch (2.54 mm) to improve visibility of and accessibility to the
bottom level. By fitting the 2-and 3-position double-level blocks in rows so that they interlock, any number of straight plug-in positions can be created.
The levels of MDSTB2.5/...-G1 are not offset. They are supplied in blocks with 3, 4, 6, or up to 20 fixed positions per level and always have side panels to prevent
incorrect plug insertion. Color: green (black or gray available on request). Approvals: ULRecognized, CSACertified. Optional self-adhesive marker
cards SK5.08/3.08 mm are used for labeling. To order, see “accessories” below.
*lower level width
POWER-COMBICON is a new improved version of the “standard” COMBICON connectors. It features a higher current capacity, an extended wire range and a
small pitch of 7.62 mm. Both the plugs and headers can be key coded using optional CP-HCC4 coding tabs. Color: green. Approvals: ULRecognized, CSA
Certified. Optional self-adhesive marker cards SK 7.62/3.8 mm are used for labeling. To order, see “Accessories” below.
M f r. ’ s Ty p e Order No. Dimensions (mm) E a c h
2.83
4.23
5.65
7.06
8.48
9.88
11.30
12.71
14.13
15.53
16.94
2.83
4.23
5.65
7.06
8.48
9.88
11.30
12.71
14.13
15.53
16.74
0.05
1804904
1804917
1804920
1804933
1804946
1804959
1804962
1804975
1804988
1804991
1805000
1804797
1804907
1804810
1804823
1804836
1804849
1804852
1804865
1804878
1804981
1804894
1600027
PC4/2-ST-7.62
PC4/3-ST-7.62
PC4/4-ST-7.62
PC4/5-ST-7.62
PC4/6-ST-7.62
PC4/7-ST-7.62
PC4/8-ST7.62
PC4/9-ST-7.62
PC4/10-ST-7.62
PC4/11-ST-7.62
PC4/12-ST-7.62
PC4/2-G-7.62
PC4/3-G-7.62
PC4/4-G-7.62
PC4/5-G-7.62
PC4/6-G-7.62
PC4/7-G-7.62
PC4/8-G-7.62
PC4/9-G-7.62
PC4/10-G-7.62
PC4/11-G-7.62
PC4/12-G-7.62
CP-HCC4
30.7
29
18
14.3
15.22
22.84
30.46
38.08
45.70
53.32
60.94
68.57
76.18
83.80
91.42
15.22
22.84
30.46
38.08
45.70
53.32
60.94
68.57
76.18
83.80
91.42
W H L
2
3
4
5
6
7
8
9
10
11
12
2
3
4
5
6
7
8
9
10
11
12
No.
of Pos. D e s c r i p t i o n
Features
lHigh Current Capacity
lExpanded conductor size
lOptional key-coding
M f r. ’s Ty p e Order
N o . E a c h
3.73
3.73
3.20
3.20
3.20
3.20
5.45
0.05
0.05
5527698
5600009
5527740
5600014
5527779
5600017
0201647
1734634
1734401
SK3.81/2.8 :UNPRINTED
SK3.81/2.8:1-10
SK5.08/3.8: UNPRINTED
SH5.08/3.8:1-10
SK7.62/3.8:UNPRINTED
SK7.62/3.8:1-10
RPS
CP-MSTB
CR-MSTB
140 pc. Marker card, unprinted, 14 rows of 10 w/pitch division marks
140 pc. Marker card, 14 rows of 10 identical consec. nos. 1-10, 11-20, etc: up to 91-100 (specify)
120 pc. Marker card, unprinted, 12 rows of 10 w/pitch division marks
120 pc. Marker card, 12 rows of 10 identical consec. nos. 1-10, 11-20, etc: up to 91-100 (specify)
120 pc. Marker card, unprinted, 12 rows of 10 w/pitch division marks
120 pc. Marker card, 12 rows of 10 identical consec. nos. 1-10,11-20, etc: up to 91-100 (specify)
Test plug for SMKDSP1.5 for connecting a 4 mm test plug to a 2.3 mm test socket, gray
Insertable key tabs, red (100 pc. package)
Insertable key tabs, red (100 pc. package)
D e s c r i p t i o n
Accessories for PCB Terminal Blocks and COMBICON Connectors
The PLC interface provides all the advantages of proven modular terminal block technology. As an interface between an automated device and the system periph-
erals, it is equipped with either a plug-in miniature relay (PLC-R) or optocoupler (PLC-O) which is easily removed with the built-in ejector latch. Additional options
are provides by the actuators (...ACT) and sensor (...SEN) versions, which accept all connections directly at the interface without additional power distribution blocks.
Insulated, color-coded plug-in jumpers (32A) permit bridging of modules. The jumper, which can be used on the input and output sides, is a continuous bridge which
can be cut to length. Input terminal block (PLC-ESK is the same shape as the PLC interface terminal blocks. It is used to feed bridging potentials and has a nom-
inal current of 32 A. When total current is less than or equal to 6 A, the inputs can take place directly at the PLC interface terminal blocks. Separating plate PLC-
ATP, is always required at the start and end of each terminal strip. It can be used for visual separation of groups, separation of neighboring bridges or separation
of PLC interfaces with voltages greater than 250 V. PLC-ATP has pre-scored breakout points at the bridging positions so that individual bridges can pass through
if needed. Relays and optocouplers are hermetically sealed (IP67). Mounting: NS35 rails. Flammability Rating: UL94V0. AWG Range: 26-14. Connections:
screw. Color: green. Dimensions: (W x L x H): 6.2 x 80 x 94 mm (terminal width of PLC-R.../21-21 and PLC-RI.../1-1ACTis 14 mm). Marker strips for labeling
are available.
Interface Terminal Blocks
PLC Series
M f r. ’ s Ty p e Order No. D e s c r i p t i o n
PLC-RSC-24DC/21AU
PLC-RSC-24UC/21AU
PLC-RSC-120UC/21AU
PLC-RSC- 230UC/21AU
PLC-RSC-24DC/21
PLC-RSC-24UC/21
PLC-RSC-120UC/21
PLC-RSC-230UC/21
PLC-OSC-24DC/48DC/100
PLC-OSC-120UC/48DC/100
PLC-OSC-230UC/48DC/100
PLC-OSC-24DC/24DC/2
PLC-OSC-120UC/24DC/2
PLC-OSC-230UC/24DC/2
PLC-RSC-24DC/1/ACT
PLC-OSC-24DC/24DC/2/ACT
PLC-RSC-24DC/1AU/SEN
PLC-RSC-120UC/1AU/SEN
PLC-RSC-230UC/1AU/SEN
PLC-OSC-24DC/48DC/100/SEN
PLC-OSC-120UC/48DC/100/SEN
PLC-OSC-230UC/48DC/100/SEN
PLC-RSC-24DC/21-21AU
PLC-RSC-24UC/21-21AU
PLC-RSC-120UC/21-21AU
PLC-RSC-230UC/21-21AU
PLC-RSC-24DC/21-21
PLC-RSC-24UC/21-21
PLC-RSC-120UC/21-21
PLC-RSC-230UC/21-21
PLC-RSC-24DC/1-1/ACT
2966265
2966278
2966281
2966294
2966171
2966184
2966197
2966207
2966728
2966744
2966757
2966634
2966650
2966663
2966210
2966676
2966317
2966320
2966333
2966773
2966799
2966809
2967125
2967112
2967138
2967141
2967060
2967073
2967086
2967099
2967109
19.00
22.00
24.00
28.00
14.00
21.50
16.00
26.00
27.00
34.00
34.00
40.00
44.00
44.00
17.00
40.00
18.00
24.00
27.00
26.00
33.00
34.00
27.00
28.00
36.00
36.00
19.00
26.00
23.00
34.00
26.00
PLC standard series w/plugable relay (S P D T): AgSnO + gold plated contacts
As above, except w/ AgSnO contacts
PLC standard series w/plugable input optical coupler
As above, except w/power optical coupler
PLC actuator w/plugable relay (1 N/O): W/AgSnO Contacts
PLC actuator w/plugable power optical coupler
PLC sensor w/plugable relay (1 N/O), w/AgSnO contacts
PLC sensor w/plugable input optical coupler
PLC standard series w/plugable relay (2 P D T ), w/AgNi + gold plated contacts
As above, except AgNi contacts
PLC actuator w/plugable relay (2 N/O), w/AgNi contacts
E a c h
24 VDC
24 VAC/DC
120VAC/110VDC
230VAC/220VDC
24 VDC
24 VAC/DC
120 VAC/110 VDC
230 VAC/220 VDC
24 VDC
120 VAC/110 VDC
230 VAC/220 VDC
24 VDC
120 VAC/110 VDC
230 VAC/220 VDC
24 VDC
24 VDC
24 VDC
120 VAC/110 VDC
230 VAC/220 VDC
24 VDC
120 VAC/110 VDC
230 VAC/220 VDC
24 VDC
24 VAC/DC
120 VAC/110 VDC
230 VAC/220 VDC
24 VDC
24 VAC/DC
120 VAC/110 VDC
230 VAC/220 VDC
24 VDC
PLC-R.../21
Approvals: CE, VDE, CSA(CE only for PLC-R.../21-21 and PLC-R.../1-1/ACT; VDE, UL, CSAapplied for)
PLC-O... PLC-R...ACT PLC-O...ACT PLC-R...SEN PLC-O...SEN PLC-R.../21-21 PLC-R.../1-1/ACT
Input Vo l t a g e
Accessories for PLC Series
PLC-ESK GY
PLC-ATP BK
FBST500-PLC RD
FBST500-PLC BU
FBST500-PLC GY
ZB 6
ZB 10
M f r. ’ s Ty p e Order No. D e s c r i p t i o n
2966508
2966841
2966786
2966692
2966838
...
...
15.00
1.49
16.00
16.00
16.00
.91
.91
Input terminal block, 9 mm wide, AWG 24-10, 250 V, 32 A, gray
Separating plate, 2 mm thick, black
Plug-in jumper, 500 mm (19.7”) long, 32 A max., cuttable,
Marker strips (order data, see “Accessories for Terminal
Blocks” in Modular Terminal Block section)
E a c h
All PLC blocks
All PLC Blocks
All PLC Blocks
All PLC blocks, except
PLC-R.../21-21, PLC-R...1-1/ACT
PLC-R.../21-21, PLC-R.../1-1/ACT
For Terminal Blocks
Red
Blue
Gray
Varioface modules are universal interface elements that simplify system wiring between the peripherals and input-output levels of automation devices. They are
electrically connected, position by position, on the input and output sides. These modules are available with either ribbon or D-Sub connectors, with or without a
light indicator in each signal path. The ribbon connector modules offer a compact 2-level version with 2.3 mm test connections (FLK), a standard 2-level version
(FLKM), and a 3-level version (FLKMS). The D-Sub connector modules offer a compact 3-level version with test connections (FLK-D...SUB), a standard 2-level
version (FLKM-D...SUB) and a 2-level version with a light indicator for each connection point (FLKM-D...SUB/LA). Each module
includes a PMB marker carrier for labeling the module. Connections: screw. Color: green. Mounting: universal.
Interface Modules
VARIOFACE modules with Ribbon Cable or D-Sub Plug Connectors
M f r. ’ s Ty p e Order No. D e s c r i p t i o n
FLK 10
FLK 16
FLK 20
FLK 26
FLKM 10
FLKM 14
FLKM 16
FLKM 20
FLKM 26
FLKM 34
FLKM 40
FLKM 50
FLKM 60
FLKM 64
FLKMS 16
FLKMS 20
FLKMS 26
FLKMS 34
FLKMS 40
FLKMS 50
FLKMS 60
FLKMS 64
FLK-D25 SUB/S
FLK-D37 SUB/S
FLK-D50 SUB/S
FLK-D25 SUB/B
FLK-D37 SUB/B
FLK-D50 SUB/B
FLKM-D9 SUB/S
FLKM-D15 SUB/S
FLKM-D25 SUB/S
FLKM-D37 SUB/S
FLKM-D50 SUB/S
FLKM-D9 SUB/B
FLKM-D15 SUB/B
FLKM-D25 SUB/B
FLKM-D37 SUB/B
FLKM-D50 SUB/B
FLKM-D9 SUB/S/LA
FLKM-D15 SUB/S/LA
FLKM-D25 SUB/S/LA
FLKM-D37 SUB/S/LA
FLKM-D50 SUB/S/LA
FLKM-D9 SUB/B/LA
FLKM-D15 SUB/B/LA
FLKM-D25 SUB/B/LA
FLKM-D37 SUB/B/LA
FLKM-D50 SUB/B/LA
2280077
2280080
2280019
2280051
2281018
2281021
2281034
2281047
2281050
2281063
2281076
2281089
2281092
2281102
2281542
2281555
2281568
2281571
2281584
2281597
2281607
2281610
2283621
2283634
2283647
2283650
2283663
2283676
2281128
2281131
2281144
2281115
2281157
2281186
2281199
2281209
2281212
2281225
2281623
2281636
2281649
2281652
2281665
2281678
2281681
2281694
2281704
2281717
32.00
42.00
41.00
52.00
28.00
32.00
36.00
39.00
44.00
53.00
62.00
71.00
98.00
103.00
43.00
54.00
65.00
83.00
95.00
108.00
132.00
142.00
65.00
79.00
102.00
65.00
79.00
102.00
33.00
43.00
48.00
66.00
89.00
33.00
47.00
51.00
66.00
89.00
64.00
81.00
116.00
157.00
179.00
65.00
82.00
117.00
158.00
182.00
Ribbon cable pin strip module, compact 2-level w/test
connections
AWG: 24-12
Rating: 60 VAC, 1A
Ribbon cable pin strip module, standard 2-level
AWG: 24-12
Rating: 60 VAC, 1A
Ribbon cable pin strip module, standard 3-level
AWG: 24-12
Rating: 60 VAC, 1A
D-SUB pin strip module, compact 3-level w/test
connections AWG: 24-12
Rating: 125 VAC/DC, 2.5 A
D-SUB socket strip module, compact standard 3-level
AWG: 24-12
Rating: 125 VAC, 2.5 A
D-SUB pin strip module, standard 2-level
AWG: 24-12
Rating: 125 VAC/DC, 2.5 A
D-SUB socket strip module, standard 2-level
AWG: 24-12
Rating: 125 VAC/DC, 2.5 A
D-Sub pin strip module, 2-level w/light indicator
AWG: 24-12
Rating: 24 VDC, 2.5 A*
D-Sub socket strip module, 2-level w/light indicator
AWG: 24-12
Rating: 24 VDC, 2.5 A*
E a c h
50
77
77
51.6
51.6
71.0
51.6
51.6
71.0
77
77
77
77
FLK 10...26
FLKM 10...64
FLKMS 16...64
FLK-D...SUB
FLKM-D...SUB
FLKM-D...SUB/LA
Dimensions (mm)
Accessories
ES/LP-BW
RPS
M f r. ’ s Ty p e Order No. D e s c r i p t i o n
1003446
0201647
.78
5.45
25-pc. perforated blank insert labels for PMB marker carrier
Test plug, for connecting a 4 mm test plug to a 2.3 mm test socket
E a c h
10
16
20
26
10
14
16
20
26
34
40
50
60
64
16
20
26
34
40
50
60
64
25
37
50
25
37
50
9
15
25
37
50
9
15
25
37
50
9
15
25
37
50
9
15
25
37
50
No. of
p o s . W
56.6
58.5
72
51.7
51.7
61.5
51.7
51.7
61.5
58.5
58.5
58.5
58.5
H60.0
60.0
60.0
75.5
45.0
45.0
67.5
67.5
90.0
112.5
112.5
135.0
180.0
180.0
45.0
56.5
67.5
79.0
79.0
101.5
112.5
124.0
71.0
96.0
86.0
71.0
96.0
86.0
45.0
67.5
90.0
112.5
112.5
45.0
67.5
90.0
112.5
112.5
45.0
67.5
90.0
112.5
157.5
45.0
67.5
90.0
112.5
157.5
L
*50 position module: A=0.5
1835
Joseph Henry invents the relay to overcome the resistance of long telegraph lines.
Henry did not patent his ideas, thus setting the stage for Samuel Morse.
With these MCR (passive) loop-powered isola-
tors, a standard signal of 0 (4) - 20 mAcan be
isolated, filtered and amplified in one conver-
sion step. Since the isolator requires no exter-
nal power, installation time and cost is greatly
reduced. These components guarantee poten-
tial separation between the control electronics
and peripherals. In addition, interference sig-
nals above 75 Hz are suppressed. These mod-
ules snap onto 35 mm wide DIN-rails and are available in 1, 2 and 4-channel
versions. Dimensions: 99 x 114.5 x 12.5 mm (1 and 2 channel models), 99 x
114.5 x 22.5 mm (4-channel model). Max. input: 30 V, 100 mA. Color: green.
Approvals: CE.
Isolation Amplifiers and Power Supply Units
MCR Loop-Powered Isolator
M f r. ’ s Ty p e Order No. I n p u t
VA C
QUINT-PS-120AC/24DC/1
QUINT-PS-120AC/24DC/2.5
QUINT-PS-120AC/24DC/2.5/F
QUINT-PS-120AC/24DC/5
QUINT-PS-120AC/24DC/5/F
QUINT-PS-120AC/24DC/10
QUINT-PS-120AC/24DC/10/F
QUINT-PS-3X207AC/24DC/20
QUINT-PS-3X207AC/24DC/20/F
QUINT-PS-3X400AC/24DC/20
QUINT-PS-3X400AC/24DC/20/F
QUINT-PS-3X207AC/24DC/30
QUINT-PS-3X207AC/24DC/30/F
QUINT-PS-3X400AC/24DC/30
QUINT-PS-3X400AC/24DC/30/F
QUINT-PS-3X207AC/24DC/40
QUINT-PS-3X207AC/24DC/40/F
QUINT-PS-3X400AC/24DC/40
QUINT-PS-3X400AC/24DC/40/F
2939247
2939056
2939250
2939069
2939263
2939072
2939276
2939454
2939551
2939467
2939564
2939098
2939292
2939195
2939399
2939645
2939742
2939849
2939946
120.00
163.00
200.00
253.00
290.00
380.00
425.00
500.00
550.00
500.00
550.00
650.00
700.00
650.00
700.00
770.00
820.00
770.00
820.00
120
120
120
120
120
120
120
3x207
3x297
3x400
3x400
3x207
3x207
3x400
3x400
3x207
3x207
3x400
3x400
E a c h
107
141
141
180
180
180
180
240
230
286
MCR...CLP-I/1-00
Dimensions (mm)
W
78
78
78
78
78
115
115
115
156
156
H
87
87
87
87
87
125
125
125
150
150
L
lWith analog signal isolation
lNo additional supply
lCE Mark
M f r. ’ s Ty p e Order No.
MCR-1CLP-I/I-00
MCR-2CLP-I/I-00
MCR-4CLP-I/I-00
2814016
2814029
2814045
280.00
365.00
645.00
E a c h
0(4)-20 mA
I n p u t /
O u t p u t
1 channel
2-channel
4-channel
O u t p u t
S i g n a l
This outlet is fully enclosed, shock proof and
the ground prongs are reversed for greater protection. It snaps onto 35 mm
wide DIN-rails and can be mounted either vertically or horizontally. Screw clamp
terminal block, VDFK4 provides reliable connections. Three versions are avail-
able: 15 A, 20 A, or 15 A with ground fault interruption. (GFI).
Dual Utility Outlet
M f r. ’ s Ty p e Order No.
EM-DUO-120/15
EM-DUO-120/15-GFI
EM-DUO-120/20
5600461
5600462
5600525
35.00
58.00
35.00
E a c h
Dual outlet, 15 A
Dual outlet w/GFI, 15 A
Dual outlet, 20 A
Output Signal
General Specifications
Technical Data
Rated voltage . . . . . . . . . . . . . 120 V ac
Rated Current . . . . . . . . . . . . . 15/20 amps
Maximum wire size . . . . . . . . . #10 AWG
Housing Data
Color . . . . . . . . . . . . . . . . . . . . Ivory
Material . . . . . . . . . . . . . . . . . . PVC 94V-0
Maximum temperature . . . . . . . 70oC
Dimensions
Length . . . . . . . . . . . . . . . . . . . 5.33 in.
Width . . . . . . . . . . . . . . . . . . . . 3.25 in.
Depth . . . . . . . . . . . . . . . . . . . 2.45 in.
Compact Primary Switched-Mode Power Supply Units
QUINT Series
The QUINT series power supplies are industrial single voltage types with primary switched-mode regulator tech-
nology and power factor correction option. This technology means the units are lightweight and operate with a
high level of efficiency. They are suitable for supplying power to electrical and electronic components in sys-
tems throughout automation engineering, plant constructions, process engineering, machine building and con-
troller production. Connections to and from the supplies are made with COMBICON connectors for wiring ease.
The output is electronically protected against overload and short circuits. Output characteristics of 1, 2.5 and
5A units: The units can be overloaded for approximately 80 ms without switching off. After this, the units switch
off and attempt to switch back on after approximately 1 second. This process repeats itself until the short cir-
cuit on the secondary side has been eliminated. Output characteristics of 10, 20, 30 and 40A units: The
unit cuts back the voltage if the current limit is exceeded by 10% of the nominal current and remains constant
at this level. This ensures that down-circuit fuses are blown selectively.
Surge Voltage Protection: varistor. Housing: steel plate, sealed: sides ABS UL94V0. Function Display:
LED. Color: green. Mounting: 35 mm wide DIN-rails.
1/25/5/10 A Models 20/30/40 A Models
V D C
24
A m p s
1
2.5
2.5
5
5
10
10
20
30
40
P o w e r
F a c t o r
0.6
0.6
0.7
0.6
0.7
0.65
0.75
0.4
0.8
0.4
0.8
0.4
0.7
0.4
0.7
0.4
0.7
0.4
0.7
O u t p u t
I n p u t
24-12
O u t p u t
24-12
24-12
24-12
24-12
24-12
24-10
24-10
24-10
20-6
20-6
AW G
The MCR-C-UI-UI-DCI modules are used for
isolation and conversion of analog signals.
Primary applications are to provide ground
loop isolation and to convert one analog sig-
nal to another.
The Universal Isolator/Converter requires a
DC supply voltage of between 18 and 30
volts. A green LED on the top of the module
indicates when power is applied. A 24V DC
650mA power supply, part number MCR-PS-
120AC/24DC/650, is available in the same
housing shape (call Carlton-Bates for details
and ordering information).
Two sealed potentiometers on top allow
zero/span adjustments. The unique housing provides easy access to the uni-
versal DIP switches, which allow you to change the inputs and outputs so that
more than 200 signal variations are possible. The module snaps onto 35 mm
wide DIN-rails. The signal and power lines are securely connected to the mod-
ules via removable COMBICON connections. Approvals: UL Recognized
(U.S. and Canada), Class 1, Div. 2, CE. Dimensions: (Lx H x W): 99 x 114.5
x 17.5 mm. Max. Input: 30 V or 50 mA. Max. Output: 15 V or 30 mA.
Instrumentation Products
Universal Isolator/Converter
Configuration via DIPswitch
M f r. ’ s Ty p e Order No.
MCR-C-UI-UI-DCI... 2810913 275.00
E a c h
Selectable*
I n p u t /
O u t p u t
24-14
AW G
*The modules will be delivered with these “standard” settings: 0-10 V/0-10 V
(input/output). The user then has the option of changing the setting (via the DIP
switches) to suit system requirements. Call if more details are required.
This loop powered isolator is used when an
active or powered PLC card must interface to a
4-wire transmitter. It provides signal conversion,
amplification and filtering. On the output side of
the isolator, the 4-20 mA loop provides power
for the module which then provides isolation
and signal conversion. Two zero/span poten-
tiometers on top allow fine adjustment of +2 %.
The signal and power lines are securely con-
nected to the module via removable COMBI-
CON connectors. The MCR loop-powered iso-
lator is particularly suitable for the electrical iso-
lation of active PLC input cards from the
process peripherals. A p p r o v a l s: CE.
Dimensions:(Lx H x W): 99 x 114.5x 17.5 mm. Mounting: 35 mm wide DIN-
rails.
MCR Loop-Powered Isolator with Selectable Input
M f r. ’ s Ty p e Order No.
MCR-CLP-UI-I-4 2814058 230.00
E a c h
Selectable*/
4-20 mA
I n p u t /
O u t p u t
24-14
AW G
*The modules will be delivered with the “standard” settings: 4-20 mA/4-20 mA
(input/output). The user then has the option of changing the input settings (via
the DIPswitches) to suit system requirements. Call if more details are required.
With these MCR (passive) loop-powered isola-
tors, a standard signal of 0 (4) - 20 mA can be
isolated and filtered in one module. Since the
isolator requires no external power, installation
time and cost is greatly reduced. These compo-
nents guarantee potential separation between
the control electronics and process peripherals.
In addition, EMI/RFI interference is suppressed. These modules snap onto 35
mm wide DIN-rails and are available in 1, 2 and 4-channel versions.
Dimensions: 99 x 114.5 x 12.5 mm (1 and 2 channel models), 99 x 114.5 x 22.5
mm (4-channel model). Max.Input: 30 V, 120 mA. Color: green. Approvals:
CE.
MCR Loop-Powered Isolator
MCR...CLP-1/1-00
M f r. ’ s Ty p e Order No.
MCR-1CLP-I/I-00
MCR-2CLP-I/I-00
MCR-4CLP-I/I-00
2814016
2814029
2814045
200.00
365.00
645.00
E a c h
0 (4) -
20 mA
I n p u t /
O u t p u t
1-channel
2-channel
4-channel
O u t p u t
S i g n a l
lWith analog signal isolation
lNo additional supply
lCE Mark
The programmable MCR-T module converts
and isolates temperature signals from resis-
tance thermometers (RTDs), thermocouples
and sensors with linear mV characteristics
into standard industrial analog signals. The
module, which has an electronic switching
PNP transistor output (100 mA/24V), is facto-
ry-configured for thermocouple sensors and
RTDs in 2, 3, or 4-wire systems. The config-
uration, (which includes characteristic curve
connection system, lower and upper mea-
surement ranges, unit of measure and out-
put). must be specified when ordering. The
output options are 0-20 mA, 4-20 mA, 0-5 V,
0-10V, + 5 V or +10 V. Call Carlton-Bates for
complete ordering information. A p p r o v a l s: CE, UL, Class 1, Div. 2.
Dimensions: (L x H x W): 99 x 114.5 x 17.5 mm. Mounting: 35 mm wide
DIN-rails.
MCR Programmable Temperature Transducers for
RTDs and Thermocouples
MCR-T-UI/
M f r. ’ s Ty p e Order No.
MCR-T-UI-E 2814113 299.00
E a c h
Specify
C o n f i g u r a t i o n
24-14
AW G
These modules convert signals from PT-100 RTD sensors and Type J or K thermocouples into electrically standardized analog
signals. They are connected via insertable COMBICON plugs and include two zero/span potentiometers on top for fine adjust-
ment of + 5%. 2, 3 or 4-conductor connections, sensor type, cold points (thermocouples), temperature ranges and output signals
are selectable via DIP switches. The desired settings can be indicated when ordering (call Carlton-Bates for ordering informa-
tion). If the desired setting are not provided, the modules will be supplied with the “standard” settings shown below. Approvals:
CE. Dimensions (Lx H x W): 99 x 114.5 x 17.5 mm. Mounting: 35 mm wide DIN-rails. AWG: 24-14
MCR Temperature Transducers
MCR-PT-100-
M f r. ’ s Ty p e Order No.
MCR-PT-100-U/...
MCR-PT-100-I/...
MCR-PT-100-U/DC/...
MCR-PT-100-I/DC/...
MCR-TE-JK-U/...
MCR-TE-JK-I/...
MCR-TE-JK-U-E/...
MCR-TE-JK-I-E/...
2810340
2810353
2810311
2810337
2810531
2810544
2810515
2810528
180.00
180.00
227.00
227.00
E a c h
For PT-100, 2, 3, 4-conductor technology
For PT-100, 2, 3, 4-conductor technology
As above, except auxiliary power galvanically isolated
As above, except auxiliary power galvanically isolated
For thermocouples type J, K
For thermocouples type J, k
As above except with isolated input
As above except with isolated input
D e s c r i p t i o n
3-conductor, 0-100oC,
Type K, 0-1000oC,
Standard Settings
Dip Switch Selectable
0-10 V output
4-20 mAoutput
0-10 V output
4-20 mAoutput
0-10 V output
4-20 mAoutput
0-10 V output
4-20 mAoutput
200.00
200.00
270.00
270.00
Industrial data conversion needs industrial, not office grade converters. These isolators and converters feature 2000V elec-
trical isolation and surge suppression, built in as standard. The modules are DIN-rail mountable and require 24VDC power.
Cable shielding is maintained and removeable wire terminal blocks reduce installation time. DIPswitches allow customiza-
tion for specific applications. Approvals: CE, UL, Class 1. Div. 2. Dimensions (LxHxW): 99x119x22.5mm.
Instrumentation Products
Data Interface Converters and Isolators
M f r. ’ s Ty p e Order
N o .
SUBCON 9/F-SH
SUBCON 9/M-SH
SUBCON 15/F-SH
SUBCON15/M-SH
SUBCON 25/F-SH
SUBCON 25/M-SH
SUBCON PLUS PROFIB
2761499
2761509
2761596
2761606
2761619
2761622
2744348
41.00
41.00
45.00
45.00
50.00
50.00
35.00
E a c h
9-pin female
9-pin male
15-pin female
15-pin male
25-pin female
25-pin male
PROFIBUS
M f r. ’s Ty p e Order No.
PSM-ME-RS485/RS485-P
PSM-ME-RS232/RS232-P
PSM-ME-RS485/TTY-P
PSM-ME-RS232/RS485-P
2744429
2744461
2744458
2744416
330.00
300.00
300.00
300.00
E a c h
RS485 repeater for MODBUS, PROFIBUS and others
Isolator for RS232 systems
Convertor for RS 232 to TTY protocol
Convertor for RS 232 to RS485 equipment
D e s c r i p t i o n
The SUBCON D-SUB connectors
(with screw connection) can be con-
nected quickly and conveniently in the
field without soldering or crimping
tools. The plug-in contacts are con-
nected to clearly numbered screw ter-
minals blocks. The 9-position version
is especially suited to INTERBUS and
a special version with terminating resistor is avail-
able for PROFIBUS. Both male and female con-
nectors are available in 9, 15 and 25-pin versions.
AWG: 26-16
SUBCON Field Bus Connectors
D e s c r i p t i o n
44.5
44.5
49.5
44.0
Dimensions (mm)
A
36.0
44.3
58.0
36.0
B
56.4
64.7
78.7
60.0
CM f r. ’ s Ty p e Order
N o .
FLKM-I/O
FLKM-2-I/O
FLKM-4-I/O
2282075
2282088
2282091
18.00
28.00
52.00
E a c h
Module for 1-relay
Module for 2-relays
Module for 4-relays
These modules allow for DIN-rail
mounting of standard solid state
relays in a high density, self-con-
tained package. The screw terminal
blocks on both sides of the module
can hold a wide range of conductor
sizes (AWG 26-14). It is available for
screw-down mounting of 1, 2 or 4
relays. A fuse and indicator for each
relay is located on the base. The
relays are ordered separately. Call
Carlton-Bates for details. Rating:
250 VDC, 5 A. Dimensions (Lx H):
77 x 40.6 mm.
Varioface Modules for Solid-State Relays
D e s c r i p t i o n Width (mm)
45.0
67.5
135.0
Varioface Modules for Interface Relays
Interface relays are used in industrial applications where low-capacity input control signals control high-capacity
output signals. The two-position changeover version allows a load resistor to be switched with one single control
signal. The DC versions are provided with an LED status indicator and contain a damping diode to protect the
control circuit. With the AC versions, the switching status is indicated with a glow lamp and does not have a damp-
ing diode. The relay supplied with the units is SPDT, hermetically encapsulated with 10 A contacts. AWG: 26-14.
Rating: determined by the relay. Mounting: 35 mm wide DIN-rail.
M f r. ’ s Ty p e Order No.
UMK22-REL 24/21-ST
UMK22-REL 120/21-ST
UMK22-REL24/21-21-ST
UMK22-REL 120/21-21-ST
5520695
5520705
5520734
5520721
27.00
35.00
35.00
41.00
E a c h
Single position change-over switch, w/light indicator and damping diode
As above, except with glow lamp, without damping diode
Two-position change-over switch, w/light indicator and damping diode
As above, except with glow lamp, without damping diode
D e s c r i p t i o n
Input Vo l t s
1800
Alessandro Volta develops the battery, the first source of continuous electric current.
It consisted of a number of copper and zinc discs arranged alternately in a vertical stack, separated by paper moistened in acid.
The practical unit of potential difference, the volt, is named for Volta.
WIRE STRIP
LENGTH 8MM (.03”)
22mm
.87”
77mm.
3.03”
50mm
1.97”
24 VDC
120 VAC
24 VDC
120 VAC
Call for quantity pricing!
Instrumentation Products
The MAINS-MODUTRAB mounts on standard DIN-rails and interfaces with terminal blocks to provide surge voltage pro-
tection for single-phase power supplies. Features a thermal detection device, which disconnects the protection path from
the power supply in the event of varistors overheating. Includes two indicator lamps: green monitors input voltage: red indi-
cates power to the source has been disconnected. Black, enclosed housing is rated IP20. Also available without light indi-
cators (MT...OLA).
PLC Protector MAINS-MODUTRAB
Mfr.’s Type Order No. Each
AWG
With light indicators
MT-2PE/S-24AC
MT-2PE/S-60AC
MT-2PE/S-120AC
MT-2PE/S-230AC
Without light indicators
MT-2PE/S-120AC-OLA
MT-2PE/S-230AC-OLA
2748072
2748085
2788935
2798802
1788948
2788757
Input Voltage
24V AC/DC
60 V AC/DC
120 V AC/DC
230 V AC/DC
120 V AC/DC
230 V AC/DC
24-12
24-12
90.00
90.00
96.00
96.00
75.00
75.00
TERMITRAB provides 3 stage protection (diode, MOV, gas tube) for 24 VDC signals. The narrow 6.2mm housing provides
high density protection and is rated for 5000 amps of 8 x 20 Msecond surge current. The analog model protects one loop
while the digital model protects two digital signals. Grounding is accomplished via a metal grounding foot. IP20 housing,
accepts wire sizes 24 AWG to18 AWG, CE approved.
24 VDC I/O Signal Protection TERMITRAB
Mfr.’s Type Order No. Each
TT-2PE-24DC
TT-2/2-24DC 2838186
2838173
Description
Analog (4-20mA, 0-10 VDC)
Digital signal protection 74.00
79.15
Phoenix Surge Voltage Protection TRABTECH (Transient Absorption Technology)
— The All-round Protection Concept
- Lightning Current Arresters and
Mains Surge Voltage Protection
- Surge Voltage Protection
Analog Digital I/O
- Surge Voltage Protection for
Data Interfaces
- Telecommunication Protection
- Testers
- Surge Voltage Protection for
Special Applications
- Material for Equipotential Bonding
and TRABTECH Housings
Housing width: 50 mm
Surge Protection for Conduit Systems SURGETRAB
The surge protector SURGETRAB-S-PT1-2PE-24DC is designed specifically for installation in conduit systems. The protective circuit is on a small PCB housed
inside a 4.72” long pipe with two 3/4” threaded ends. The pipe has a screw cover on one end, and, with a T-
adapter, this device can be integrated into any conduit system. The 2-stage protective circuit provides protection
for conductor pairs in floating signal circuits. A powerful gas-filled 3-electrode surge arrester and a low limiting
diode are decoupled by resistors, providing both fine and coarse protection. Two terminal blocks on the PCB
clearly marked “IN” and “OUT” provide secure connections. The PCB grounding wire is connected to a washer
on one end of the pipe. The ground is completed when the pipe screw cover is tightened. Nominal voltage: 24
VDC. Max. voltage: 28 VDC. Nominal Current: 250 mA. AWG: 26-16. Max. response time: normal mode,
1 ns: common mode, 100ns.
Mfr.’s Type Order No. Each
S-PT1-2PE-24DC
S-PT1-2PE-24DC/P 2818122
2818216
Description
Pipe stub w/integrated PCB
PCB only without pipe stub 85.00
48.00
PLUSCON MODULAR PLUG CONNECTORS
VARICON is a range of modular plug connectors designed for industrial applications.
Each connector set consists of the following components: either a plastic or metal
hood, hood frame, panel mounting frame, panel mounting flanges, marker tag and
shield adapter (for EMC series). The modular contact inserts must be ordered sepa-
rately and are listed below.
Three series, with four housing sizes each are available, and feature IP 65-IP 69K
protection, and can be either PCB or panel mounted. The plastic housings are made
of high-impact industrial plastic and can withstand most mechanical and chemical
influences. The corrosion resistant metal housings are made of tin and copper-plat-
ed zinc die casts. The hoods of all the series have the same shape and dimensions.
Two screws ensure a tight connection. Optional glands are listed below.
VARIOCON Series Connector Sets
Mfr.’s Type Order
No. Each
Description
VC-K-KV-PG16 (4-6.5)
VC-K-KV-PG16 (5-8)
VC-K-KV-PG16 (6.5-9.5)
VC-K-KV-PG16 (7-10.5)
VC-K-KV-PG16 (9-13)
VC-K-KV-PG16 (11.5-15.5)
VC-K-KV-PG21 (7-10.5)
VC-K-KV-PG21 (9-13)
VC-K-KV-PG21 (11.5-15.5)
VC-K-KV-PG21 (14-18)
VC-K-KV-PG21 (17-20.5)
VC-M-KV-PG16 (4-6.5)
VC-M-KV-PG16 (5-8)
VC-M-KV-PG16 (6.5-9.5)
VC-M-KV-PG16 (7-10.5)
VC-M-KV-PG16 (9-13)
VC-M-KV-PG16 (11.5-15.5)
1854459
1853735
1853748
1853751
1853764
1854844
1853890
1853900
1853913
1853926
1853939
1853942
1853955
1953968
1853971
1853984
1854857
Cable Dia.
(mm)
4-6.5
5-8
6.5-9.5
7-10.5
9-13
11.5-15.5
7-10.5
9-13
11.5-15.5
14-18
17-20.5
4-6.5
5-8
6.5-9.5
7-10.5
9-13
11.5-15.5
Plastic series
for size 1
hoods
Plastic series
for sizes 2-4
hoods
Metal series
for size 1
hoods
3.19
5.25
4.18
Mfr.’s Type Order
No.
VC-K1/2M-SET
VC-K2/3M-SET
VC-K3/4M-SET
VC-K4/5M-SET
VC-M1/2M-SET
VC-M2/3M-SET
VC-M3/4M-SET
VC-M4/5M-SET
VC-EMV1/2M-SET
VC-EMV2/3M-SET
VC-EMV3/4M-SET
VC-EMV4/5M-SET
1854116
1854145
1854187
1854226
1854268
1854284
1853780
1854310
1854336
1854352
1854378
1854381
Hood Size
1
2
3
4
1
2
3
4
1
2
3
4
Description
Connector set, plastic series
Connector set, metal series
Connector set, metal, shielded EMC series
For Number of
Modules
2
3
4
5
2
3
4
5
2
3
4
5
Each
20.59
22.83
24.63
27.79
34.57
39.51
41.45
46.13
37.90
43.69
46.29
52.06
Hood Dimensions (mm)
73.3
72.2
79.3
76.3
73.3
72.2
79.3
76.3
73.3
72.2
79.3
76.3
64.8
64.8
74.9
75.0
64.8
64.8
74.9
75.0
64.8
64.8
74.9
75.0
59
74
89
104
59
74
89
104
59
74
89
104
66
81
96
111
66
81
96
111
66
81
96
111
A B C D
VC-K...-SET Dimensional drawing of hood
Modular Contact Inserts
Fig. 1
Contact Inserts for Plugs Fig. 2
Contact Inserts for Mating Side
These modular contact inserts are based on proven COMBICON technology and are available
in three versions. The inserts for the plug connector sets above snap into the mounting frame
and can be inserted quickly into the hood. They feature screw connections and socket contacts.
The contact inserts for the mating side feature pin contacts and are available in PCB or panel
mount options. The panel mount inserts are like the PCB inserts except they are connected via
screw terminal blocks. All three versions are 15 mm wide and are offered with 2, 6 or 8 posi-
tions. The individual contacts can be keyed with optional key tabs, preventing mismating when
several connectors are in close proximity. Approvals: ULrecognized (U.S. and Canada).
Mfr.’s Type Order No.
VC-TFS-2
VC-TFS-6
VC-TFS-8
VC-AML-2
VC-AML-6
VC-AML-8
VC-AMS-2
VC-AMS-6
VC-AMS-8
CP-HCC 4
CP-MSTB
1852846
1853476
1852820
1852859
1853531
1852833
1853528
1854019
1854022
1600027
1734634
Fig.
1
2
3
No. of Pos.
2
6
8
2
6
8
2
6
8
Description
Contact insert for plug connector
Contact insert for mating side-PCB mount
Contact insert for mating side-panel mount
Each
3.85
5.37
7.23
3.07
3.83
6.28
3.41
5.00
7.16
5.00/pkg.
5.00/pkg.
Pitch
(mm) AWG Rating
7.5
5.0
3.5
7.5
5.0
3.5
7.5
5.0
3.5
24-10
28-16
28.16
...
...
...
24.10
28.16
28.16
400V, 20A
250V, 8A
125V, 8A
400V, 20A
250V, 8A
125V, 8A
400V, 20A
250V, 8A
125V, 8A
Keytabs, red, 100 pc. pkg., for all 2-pos. contact inserts
Keytabs, red, 100 pc. pkg., for VC-AM6, VC-AML8, VC-AMS6, VC-AMS8
Cable glands made of plastic, metal and metal/shielded are available. Plastic
and metal glands consist of a rubber seal and pressure screw, which also
serves as a strain relief. The shielded version, used with the EMC series con-
nectors, also includes an iris spring and two conical washers, that slip over
and contact the braided shielding.
Cable Glands
Mfr.’s Type Order
No. Each
Description
V C - M - K V-PG21 (7-10.5)
V C - M - K V-PG21 (9-13)
V C - M - K V-PG21 (11 . 5 - 1 5 . 5 )
V C - M - K V-PG21 (14-18)
V C - M - K V-PG21 (17-20.5)
V C - E M V- K V -PG16 (6.5-9.5/6.5)
V C - E M V- K V -PG16 (7-10.5/8.5)
V C - E M V- K V -PG16 (9-13/10.5)
V C - E M V- K V-PG21 (9-13/9.5)
V C - E M V- K V -PG21 (9-13/12)
V C - E M V- K V -PG21 (11 . 5 - 1 5 . 5 / 1 3 . 5 )
V C - E M V- K V -PG21 (14-18/14.5)
1853997
1854006
1854035
1854048
1854051
1854132
1854161
1854174
1854200
1854213
1854242
1854255
Cable Dia.
(mm)
7-10.5
9-13
11.5-15.5
14-18
17-20.5
6.5-9.5
7-10.5
9-13
9-13
9-13
11.5-15.5
14-18
Metal series
for size 2-4
hoods
Metal shield-
ed series for
size 1 hoods
Metal shield-
ed series for
size 2-4
hoods
7.59
16.93
22.55
Note (metal shielded series): The cable shield dia. Is indicated in the part
number. For example, VC-EMC-KV-PG21 (9-13/12), the /12 indicates a cable
shield dia of 12 mm.
Fig. 3
VC-K-KV...
VC-EMV-KV...
VC-M-KV...
PLUSCON Sensor/Actuator Breakout Boxes
The SACB...PUR/SC sensor/actuator boxes are available with 4, 6 or 8 M12 sockets, feature IP67 protection and can be supplied with the standard single-occu-
pied sockets or double-occupied sockets, that double the number of sensors that can be connected (when used with the double plugs below). One version comes
with a pre-wired master control cable and another version uses spring cage terminal block connections, allowing the user to quickly assemble a cable as desired.
Status LEDs show the operating status of the I/O’s. The smaller SACB-8/... box features 8 M8 sockets per box, IP65 protection and control inputs via either mas-
ter cable or a round plug connection. Normal voltage: 24 VDC. Max. operating voltage: 30 VDC. All of the boxes below include marker strips (replacement
strips available). Protective caps are available for unoccupied M 12 sockets.
Sensor/Actuator Breakout Boxes with M 12 or M 8 Sockets
Mfr.’s Type Order No.
SACB-4/8-L-5.0 PUR
SACB-4/8-L-10.0 PUR
SACB-6/12-L-5.0 PUR
SACB-6/12-L-10.0 PUR
SACB-8/16-L-5.0 PUR
SACB-8/16-L-10.0 PUR
SACB-4/4-L-5.0 PUR
SACB-4/4-L-10.0 PUR
SACB-6/6-L-5.0 PUR
SACB-6/6-L-10.0 PUR
SACB-8/8-L-5.0 PUR
SACB-8/8-L-10.0 PUR
SACB-4/4-L-SC
SACB-6/6-L-SC
SACB-8/8-L-SC
SACB-8/3P-5.0 PUR-M8
SACB-8/3P-10.0 PUR-M8
SACB-8/4P-5.0 PUR-M8
SACB-8/4P-10.0 PUR M8
SACB-8/3P-12CON-M8
SACB-8/4P-19CON-M8
PROT M12
ZBN 18:unprinted
ZB5:unprinted
1695074
1695087
1695139
1695142
1695197
1695207
1695045
1695058
1695100
1695113
1695168
1695171
1671221
1671234
1671247
1680050
1680063
1680076
1680089
1680092
1680102
1680539
2809128
1050004
Description
Sensor/actuator box w/master cable,
double-occupied M12 sockets
Sensor/actuator box w/master cable,
single-occupied M12 sockets
Sensor/actuator box w/spring cage terminal blocks,
single-occupied M12 sockets
Sensor/actuator box w/master cable,
single-occupied M8 sockets
Box w/12-pos. plug, single-occupied M8 sockets
Box w/19-pos. plug, single-occupied M8 sockets
Plastic protective caps for M12 sockets (5-pc. pkg.)
10 pc. perforated unprinted marker strip for SACB...PUR/SC boxes
10 pc. perforated unprinted marker strips for SACB-8 boxes
No. of
Sockets
4
4
6
6
8
8
4
4
6
6
8
8
4
6
8
8
8
8
8
8
8
Each
97.76
130.66
139.10
176.72
150.40
188.00
79.80
108.10
103.40
136.30
117.50
150.40
57.82
73.50
87.22
148.96
174.44
164.64
198.94
117.60
131.32
0.75
0.78
0.65
Dimensions (mm)
116.5
116.5
128.5
128.5
155.0
155.0
82
82
100
100
126.5
126.5
116.5
128.5
155.5
77
95
54
54
54
48
48
18.5
18.5
32
25
25
L W H
SACB...SC
Mfr.’s Type Order
No. Each
No. of
Pins
SACC-M12MS-4CON-PG7-M
SACC-M12MS-5CON-PG7-M
SACC-M12MS-5CON-PG7
SACC-M12MR-5CON-PG7-M
SACC-M12MR-5CON-PG7
SACC-M12MS-5CON-PG11-DUO
SACC-M12FS-5CON-PG7
SACC-M12FS-5CON-PG7-M
SACC-M12FR-5CON-PG7
1662528
1663116
1662256
1663129
1662269
1662285
1662298
1662968
1662308
Description
Plug, straight
Plug, angled
Double-plug
Socket, straight
Socket, angled
4
5
5
5
5
5
5
5
5
9.68
12.03
11.66
12.03
11.66
13.54
11.66
12.03
11.66
SACB...PUR
Sensor/actuator boxes with M 12 slots
1 + 24 VDC
2 input/output A
3 0V
4 input/output B
5 PE
Pin assignment of the slots
SACB-8/...CON-M8
SACB-8/...PUR-M8
Sensor/actuator boxes with M 8 slots
No. of
Pins
5
5
5
3
3
4
4
3
4
Cable
Length
5m
10m
5m
10m
5m
10m
5m
10m
5m
10m
5m
10m
---
---
---
5m
10m
5m
5m
---
---
M 12 Sensor/Actuator Plugs and Sockets
M 12 plugs M 12 sockets
4-position
5-position
These plastic connectors offer IP67 protection. The
double plug can be used with the double-occupied
sockets on the boxes above, as 2 initiater cables
can be inserted via the PG11 cable gland. Nominal
voltage: 30 VAC, 36 VDC
W/metal knurl
W/metal knurl
W/plastic knurl
W/metal knurl
W/plastic knurl
straight w/plastic knurl
W/plastic knurl
W/metal knurl
W/plastic knurl
SACB...Q...PUR SACB...Q...SC
These boxes have the same features as the ones listed above except they feature the QUICKON quick
connection system. Simply remove the cable sheath (approx. 15 mm), slide on the union nut, the cap and
rubber seal, insert the conductor ends into the feed though of the splice ring (labeled 1, 2, 3 and 4) and
cut off the projecting ends. Next, insert the splice ring into the contact carrier and tighten the union nut
that creates the contact and strain relief when tightened, without any extra tools or stripping of the conduc-
tors. Protective caps are available for unused sockets. Marker strips ZBN 18: unprinted are included.
Protection type: IP67. Nominal/max. voltage: 24/30 VDC.
Sensor/Actuator Boxes with Quick Connection System Quickon
Mfr.’s Type Order No.
SACB-4Q/4P-L-5.0 PUR
SACB-4Q/4P-L-10.0 PUR
SACB-6Q/4P-L-5.0 PUR
SACB-6Q/4P-L-10.0 PUR
SACB-8Q/4P-L-5.0 PUR
SACB-8Q/4P-L-10.0 PUR
SACB-4Q/4P-L-SC
SACB-6Q/4P-L-SC
SACB-8Q/4P-L-SC
QPROT
1695223
1695236
1695252
1695265
1695281
1695294
1662939
1662942
1662955
1670222
Description
Sensor/actuator box w/master cable,
4-position QUICKON connections
Sensor/actuator box w/spring cage terminal blocks
and 4-position QUICKON connections
Plastic protective caps for QC sockets (10 pc. pkg.)
No. of
Sockets
4
4
6
6
8
8
4
6
8
Each
95.88
128.78
124.08
156.98
141.00
173.00
65.58
88.20
104.66
24.40
Dimensions (mm)
97
97
134
134
170
170
132
168
205
60
60
44
44
L W H
No. of
Pins
4
4
Cable
Length
5 mm
10 mm
5 mm
10 mm
5 mm
10 mm
...
...
...
3-pos. socket12-pos. plug connection
4-pos. socket19-pos. plug connection
Interbus
The INTERBUS ST (Smart Terminal Block) family of
products is a compact class of I/O modules that commu-
nicates over an INTERBUS sensor/actuator network.
Components and assemblies that make up the module
are identified in Figure 1. The three main structural com-
ponents are the DIN-rail mounted base terminal block
unit, pluggable electronics module and the STlocal bus
cable assembly. The base terminal block unit contains
the wire-clamp assemblies, connectors and fuses. The
electronics module contains all the actual circuitry.
INTERBUS ST
Mfr.’s Type &
Order No. Description I/O Data
Features of the INTERBUS ST Module
Bus Terminal Modules - Copper and Fiber Optic
Analog Input Modules
IBS ST 24 BKM-T
2750154
IBS ST 24 BK-T
2754341
IBS ST 24 BK RB-T
2753504
IBS ST 24 BK LB-T
2753232
IBS ST 24 BK DIO 8/8/3-T
2752411
IBS ST 24 BKM-LK
2750963
IBS ST 24 BK-LK
2754435
IBS ST 24BK DIO 8/8/3-LK
2751218
IBS ST 24 BK RB-T DIO 8/8/3-LK
2723453
IBS ST 24 BK RB-LK DIO 8/8/3-LK
2721662
Bus Terminal Module with fixed electronics: copper remote bus,
COMBICON remote bus connection.
Bus Terminal Module: copper remote bus, 9-pin D-Sub remote bus
connection.
Bus Terminal Module: copper remote bus, 9-pin D-Sub remote bus
connection, plus an additional 15-pin D-Sub local bus connection.
Bus Terminal Module with I/O: copper remote bus, 9-pin D-Sub
remote bus connection, FLK connection.
Bus Terminal Module with fixed electronics: fiber optic remote bus,
FSMAremote bus connection.
Bus Terminal Module: fiber optic remote bus, FSMAremote bus
connection.
Bus Terminal Module with I/O: fiber optic remote bus, FSMA
remote bus connection, FLK connection.
Bus Terminal Module with I/O: fiber optic remote bus, FSMA
remote bus connection, 9-pin branch remote bus connection, FLK
connection.
Bus Terminal Module with I/O: fiber optic remote bus, FSMAremote
bus connection, FSMAbranch remote bus connection, FLK connec-
tion.
Bus Terminal Module: copper remote bus, 9-pin D-Sub remote bus
connection, 9-pin branch remote bus connection.
Not Applicable
Not applicable
Not Applicable
Not Applicable
8 inputs: 24 VDC, 5 mA, 1ms filter.
8 outputs: 24 VDC, 0.5 A.
Not Applicable
Not Applicable
8 inputs: 24 VDC, 5 mA, 1ms filter.
8 outputs: 24 VDC, 0.5 A.
8 inputs: VDC, 5 mA, 3 ms filter
8 outputs: 24 VDC, 0.5 A.
8 inputs: 24 VDC, 5 mA, 3 ms filter.
8 outputs: 24 VDC, 0.5 A.
Configurable per channel. Voltage ranges: 0 to +5
VDC, 0 to +10 VDC, 0 to +25 VDC, 0 to +50 VDC, 8-
or 12- bit resolution modes (39 or 2.44 mV/step).
Voltages range: 0 to +10 VDC (2.44 mV/step).
Current ranges: 0 to +20 mA(4.88 µA/step), +4 to +20
m A (3.91 µA/step). 12-bit resolution.
Voltage range: 0 to +10 VDC (2.44 mV/step).
Current ranges: 0 to +20 mA(4.88 µA/step). 12-bit
r e s o l u t i o n .
Voltage range: 0 to +10 VDC (4.88 mV/step).
Current ranges: +4 to +20 mA(3.91µA/step). 12-bit
r e s o l u t i o n .
Voltage range: -10 to +10 VDC (4.88 mV/step).
Current ranges: -20 to +20 mA(9.75 µA/step). 12- bit
r e s o l u t i o n .
Voltage range: -10 to +10 VDC (4.88 mV/step).
Current ranges: +4 to +20 mA(7.81 µA/step). 12- bit
r e s o l u t i o n .
Configurable per channel. Voltage: 0 to +10 VDC
(2.44 mV/step). Current: 0 to +20 mA(4.88 µA/step),
+4 to +20 mA(3.91 µA/step). 12- bit resolution.
Configurable per channel. Current ranges: 0 to +20
mA, +4 to +20 mA, 0 to +40 mA, 0 to +60 mA, 8-bit
(62.7 µA/step) or 12- bit (3.9 µA/step) resolution.
Measuring range: -273.1 to +3276.7oC or -459.6 to
+ 3 2 7 6 . 7oF. 16-bit resolution: 0.1oC or 0.1 K for
Celsius, 0.1oF or 0.056 K for Fahrenheit.
J- or K-type thermocouples. 16-bit resolution.
Configurable per channel. Voltage ranges: 0 to +100,
0 to +200, 0 to +500 mVDC. Also 0 to +1 VDC.
Resolution: 8- or 12- bit (781.25 or 48.83 µV/step).
Analog Input Module: 24 VDC, 8 voltage inputs (single ended).
Analog Input Module: 24 VDC, 2 voltage or current inputs
(differential).
Analog Input Module: 24 VDC, 4 voltage or current inputs
(differential).
Analog Input Module: 24 VDC, 4 voltage or current inputs
(differential).
Analog Input Module: 24 VDC, 2 voltage or current inputs
(differential).
Analog Input Module: 24 VDC, 4 voltage or current inputs
(differential).
Analog Input Module: 24 VDC, 4 voltage or current inputs
(differential and isolated per channel).
Analog Input Module: 24 VDC, 8 current inputs (single ended).
Analog Input Module: 24 VDC, 4 RTD inputs.
Analog Input Module: 24 VDC, 8 thermocouple inputs.
Analog Input Module: 24 VDC, 8 voltage inputs (single ended).
IB ST 24 BAI 8/U
2721015
IB ST 24 BAI 2/SF
2722771
IB ST 24 AI 4/SF
2754309
IB ST 24 AI 4/SF4
2750565
IB ST 24 BAI 2/BP
2725888
IB ST 24 AI 4/BP
2751564
IB ST 24 AI 4/I
2719629
IB ST 24 BAI 8/I
2721028
IB ST 24 PT 100 4/4
2752767
IB ST 24 UTH 8
2724902
IB ST 24 BAI 8/U-MV
2724986
Wire Entry Hole (typical)
DIN-rail (not supplied)
Access Hole for Wire
Clamp Screw (typical)
ST Local Bus Cable
Locking Clips (typical both sides)
Keying Tab (typical)
Positive Latch
Diagnostics
LED Bank
(red & green)
Module
Identification
Status LED Bank (amber)
Pluggable
Electronic Module
0823A002
Pullout Marking
Field
ST Local Bus
Cable Assembly
Base Terminal
Block Unit
DIN-Rail
Release Tab
ST Local Bus Cable
Storage Area (typi-
cal both sides)
Metal Grounding Strap
Insertion Bridge Bar Groove
Optional Wire Termination
Markers (typical)
(Continued on
Fig. 1
Process understanding is the key to choosing the correct I/O modules. The
ST table below is organized to help you find the modules that meet your con-
trol needs. After choosing those modules that meet your current and future
requirements, you will have to determine the complimentary products and
accessories needed to complete your system. A list of accessories is provided
with each module data sheet. Data sheets are available for most modules and
may be obtained through Phoenix Contact’s FAX-ON-DEMAND system (800-
944-9901) or calling Carlton-Bates. Connection Data:AWG 24-12.
Operating Temperature: 0 to +55oC. Wide temperature range modules (-20o
to +55oC) are available upon request.
Features Power Requirements Local Bus
Current
Slim design. Network connectors included. Supports up to four ST local bus I/O
modules (observe local bus current capacity).
Alarm output. Reconfiguration input. Supports up to eight ST local bus I/O modules
(observe local bus current capacity).
Alarm output. Reconfiguration input. Supports up to eight STlocal bus I/O modules
(observe local bus current capacity). Provides two remote bus outputs.
Alarm output. Reconfiguration input. Supports up to eight STor Flat Pack local bus
I/O modules (observe local bus current capacity).
Reconfiguration input. Supports up to four ST local bus I/O modules (observe local
bus current capacity). Accepts two- and three-wire I/O devices.
Slim design. Supports up to four STlocal bus I/O modules (observe local bus current
capacity). Electrical isolation between communication and supply voltage.
Alarm output. Reconfiguration input. Supports up to eight STlocal bus I/O modules
(observe local bus current capacity),
Reconfiguration input. Supports up to four ST local bus I/O modules (observe local
bus current capacity). Accepts two- and three-wire I/O devices.
Reconfiguration input. Supports up to four ST local bus I/O modules (observe local
bus current capacity). Accepts two- and three-wire devices. Provides two remote bus
outputs.
Reconfiguration input. Supports up to four ST local bus I/O modules (observe local
bus current capacity). Accepts two-and three-wire I/O devices. Provides two remote
bus outputs.
24 VDC
350 mAmax.
24 VDC
650 mAmax.
24 VDC
650 mAmax.
24 VDC
450 mAmax.
24 VDC
300 mAmax.
24 VDC
350 mAmax.
24 VDC
450 mAmax.
24 VDC
500 mAmax.
24 VDC
500 mAmax.
24 VDC
650 mAmax.
500 mAmax.
supply
800 mAmax.
supply
800 mAmax.
supply
800 mAmax.
supply
500 mAmax.
supply
500 mAmax.
supply
800 mAmax.
supply
500 mAmax.
supply
500 mAmax.
supply
500 mAmax.
supply
135 mAmax.
draw
140 mAmax.
draw
150 mAmax.
draw
150 mAmax.
draw
140 mAmax.
draw
150 mAmax.
draw
100 mAmax.
draw
150 mAmax.
draw
100 mAmax.
draw
150 mAmax.
draw
135 mAmax.
draw
24 VDC
68 mAtyp. (no passive sensors)
160 mAtyp. (at max. load)
24 VDC
24 VDC
125 mAtyp. (no passive sensors)
300 mAtyp. (at max. load)
24 VDC
125 mAtyp. (no passive sensors)
300 mAtyp. (at max. load)
24 VDC
24 VDC
125 mAtyp. (no passive sensors)
300 mAtyp. (at max. load)
24 VDC
80 mAmax.
24 VDC
68 mAtyp. (no passive sensors)
160 mA(at max. load)
24 VDC
65 mAmax.
24 VDC
65 mAmax.
24 VDC
68 mAtyp. (no passive sensors)
160 mAtyp. (at max. load)
Process data update time: 350 µs/channel. Fault indication: failure of +24 V I/O sup-
ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.
Process data update time: 0.55 ms/channel.
Process data update time: .075 ms/channel. Fault indication: failure of +24 V I/O sup-
ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.
Process data update time: 0.75 ms/channel. Fault indication: failure of +24 V I/O sup-
ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.
Process data update time: 0.55 ms/channel.
Process data update time: 1 ms/channel. Fault indication: failure of +24 V I/O
supply voltage, failure of +15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.
Process data update time: 0.55 ms/channel. Fault indication: failure of +24 V I/O sup-
ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.
Process data update time: 0.4 ms/channel. Fault indication: failure of +24 V I/O sup-
ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.
Process data update time: 258 ms/channel.
Process data update time: 3 s/channel.
Process data update time: 350 µs/channel. Fault indication: failure of +24 V I/O sup-
ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.
Modules
Module Family •Electronics packaged in a
removable module
Pullout marking field for channel
identification on most modules
•Optional wire termination markers
available.
•Screw-clamp terminations for both
module power and I/O power.
Spring-clamp terminations are
available for most modules upon
request.
•Electrical isolation
•IP20 housing rating
•I/O modules accept 2, 3- or 4-wire
I/O devices, depending on module
type
•I/O modules have from 2 to 32 I/O
points depending on module type.
•Each local bus can support up to
256 I/O points
•Each local bus can support both
digital and analog signals
•Diagnostic and status LEDs on
each module
•Module diagnostics over INTER-
BUS network.
Dimensions
W x H x D
118 x 116 x 117
(mm
81 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
81 x 116 x 117
(mm)
118 x 116x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
Each
44 x 116 x 117
(mm)
81 x 116 x 117
(mm)
81 x 116 x 117
(mm)
81 x 116 x 117
(mm)
118 x 116 x 117
(mm)
44 x 116 x 117
(mm)
81 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
next page)
Features
190.00
340.00
550.00
550.00
680.00
680.00
298.00
430.50
798.00
980.00
825.00
450.00
820.00
815.00
450.00
925.00
1110.00
830.00
780.00
1000.00
1250.00
Interbus
INTERBUS ST
Mfr.’s Type &
Order No. Description I/O Data
Digital Input Modules
IB ST 24 DI 32/2
2754927
IB ST 24 BDI 8/4
2750808
IB ST 24 BDI 16/4
2750170
IB ST 24 DI 16/4
2754338
IB ST 48 DI 16/2
2721109
IB ST 120 DI 16/3
2719276
IB ST 230 DI 16/3
2721099
Digital Input Module: 24 VDC, 32 inputs. Accepts two-wire I/O
devices.
Digital Input Module: 24 VDC, 8 inputs. Accepts two-, three-, and
four- wire I/O devices.
Digital Input Module: 24 VDC, 16 inputs. Accepts two-, three-, and
four- wire I/O devices
Digital Input Module: 48 VDC, 16 inputs. Accepts two- wire I/O
devices.
Digital Input Module: 120 VAC, 16 inputs. Accepts two- and three-
wire I/O devices.
Digital Input Module: 230 VAC, 16 inputs. Accepts two- and three-
wire I/O devices.
Digital Input Module: 24 VDC, 16 inputs. Accepts two-, three-, and
four- wire I/O devices.
32 inputs, 24 VDC, 5 mA, 3ms filter
8 inputs, 24 VDC, 6 mA, 0 ms filter
16 inputs, 24 VDC, 6 mA, 0 ms filter
16 inputs, 24 VDC, 7 mA, 3 ms filter
16 inputs, 48 VDC, 7 mA, 3 ms filter
16 inputs, 120 VAC, 4.8 mA, 30 ms filter
16 inputs, 230 VAC, 7 mA, 30 ms filter
IB ST 24 DIO 8/8/3-2A
2753708
IB ST 24 DIO 8/8/3-2A-S
2753449
IB ST 24 DIO 8/8R/3
2751849
Digital Input/Output Module: 24 VDC, 8 inputs, 8 outputs. Accepts
three-wire I/O devices.
Digital Input/Output Module: 24 VDC, 8 inputs, 8 outputs with output
logic control. Accepts three- wire I/O devices.
Digital Input/Output Module: 24 VDC, 8 inputs, 8 relay outputs
(SPDT). Accepts three- wire I/O devices.
8 inputs: 24 VDC, 5 mA, 3 ms filter.
8 outputs: 24 VDC, 2.0 A.
8 inputs: 24 VDC, 5 mA, 3 ms filter.
8 outputs: 24 VDC, 2.0 A.
8 inputs: 24 VDC, 5 mA, 3 ms filter.
8 relay outputs (SPDT): up to 230 VAC and 3.0 A.
Digital Input and Output Modules
Digital Output Modules
IB ST 24 BDO 32/2
2750824
IB ST 24 DO 32/2
2754325
IB ST 24 BDO 8/3
2750811
IB ST 24 BDO 16/3-250
2750167
IB ST 24 BDO 16/3-500
2724931
IB ST 24 DO 16/3
2754914
IB ST 24 DO 16 R/S
2721112
Digital Output Module: 24 VDC, 32 outputs. Accepts two- wire I/O
devices.
Digital Output Module: 24 VDC, 32 outputs. Accepts two- wire I/O
devices.
Digital Output Module: 24 VDC, 16 outputs. Accepts two- and three-
wire I/O devices.
Digital Output Module: 24 VDC, 16 outputs. Accepts two- and three-
wire I/O devices.
Digital Output Module: 24 VDC, 16 outputs. Accepts two- and three-
wire I/O devices.
Digital Output Module: 24 VDC, 16 relay outputs (SPST). Accepts
two- and three- wire I/O devices.
Digital Output Module: 24 VDC, 8 outputs. Accepts two- and three-
wire I/O devices.
32 outputs: 24 VDC, 0.5 A.
32 outputs: 24 VDC, 0.5 A.
8 outputs: 24 VDC, 0.25 A.
16 outputs: 24 VDC, 0.25 A.
16 outputs: 24 VDC, 0.5 A.
16 outputs: 24 VDC, 0.5 A.
16 relay outputs (SPST): up to 230 VAC and 3.0 A.
IB ST 24 DO 8/3-2A
2754891
IB ST 120/230 DO 8/3-1A
2719263
Digital Output Module: 24 VDC, 8 outputs. Accepts two- and three-
wire I/O devices.
Digital Output Module: 120 or 230 VAC, 8 outputs. Accepts two-
and three- wire I/O devices.
8 outputs: 24 VDC, 2.0 A.
8 outputs: 120 or 230 VAC, 1.0 A.
IB ST V.24
2725480
IB ST 24 CNT
2750400
IB ST 24 INC/2
2751975
RS-232/V.24 Communication Module
Counter Modules with 4 Counters
Two-channel Positioning Module
Configurable baud rate (110 to 19200) via PCP
channel.
16- bit resolution, pulse generator .01 to 10 kHz.
Measuring range: 0 to 90 kHz (typ), 0 to 300 kHz
(with one channel in use).
Incremental encoder inputs: 0 to 25 kHz (24 V sig-
nals), 0 to 500 kHz (5V signals). Refer to module
data sheet no. 0614 for more information.
Special Function modules
Analog Output Modules
IB ST 24 BAO 8/U-8B
2721031
IB ST 24 AO 4/BP
2752521
IB ST 24 BAO 8/U
2721044
IB ST 24 AO 4/SF
2754312
IB ST 24 AO 4/SF4
2750578
Analog Output Module: 24 VDC, voltage outputs.
Analog Output Module: 24 VDC, 4 voltage outputs.
Analog Output Module: 24 VDC, 4 voltage or current outputs.
Analog Output Module: 24 VDC, 4 voltage or current outputs.
Analog Output Module: 24 VDC, 8 voltage outputs.
Voltage range: 0 to +10 VDC (39 mV/step), 8- bit
resolution.
Voltage range: -10 to +10 VDC (4.88 mV/step), 12-
bit resolution
Voltage range: -10 to +10 VDC (2.44 mV/step) or -
12 to +12 VDC (2.93 mV/step). 13- bit resolution.
Voltage range: 0 to +10 VDC (2.44 mV/step).
Current range: 0 to +20 mA(4.88 µA/step). 12 bit-
resolution.
Voltage range: 0 to +10 VDC (2.44 mV/step).
Current range: +4 to +20 mA(3.91 µA/step). 12- bit
resolution.
Modules
Module Family (continued)
Features Power
Requirements Local Bus Current
One isolated group. Fault indication: failure of +24 V I/O supply voltage
One isolated group. Fault indication: failure of +24 V I/O supply voltage, blown fuse at
I/O supply voltage
One isolated group. Fault indication: failure of +24 V I/O supply voltage failure, blown
fuse at I/O supply voltage
Four isolated groups. Fault indication: failure of +24 V I/O supply voltage, short circuit
or overload of initiator supply voltage, over-temperature of an output driver.
One isolated group.
One isolated group.
One isolated group.
24 VDC
2.0 A
24 VDC
200 mA
24 VDC
800 mA
48 VDC
120 VAC
1.0A
230 VAC
24 VDC
1.0A
100 mAmax. draw
50 mA max. draw
100 mAmax. draw
100 mAmax. draw
100 mAmax. draw
100 mAmax. draw
100 mAmax. draw
Fault indication: blown fuse at I/O supply voltage (indicated only is the other fuse in
isolated group is OK).
Fault indication: blown fuse at I/O supply voltage (indicated only is the other fuse in
isolated group is OK).
24 VDC
16 A max.
24 VDC
16 A max.
24 VDC
100 mAmax. draw
100 mAmax. draw
100 mAmax. draw
One isolated group. Electronic over-circuit protection per group of four channels.
Fault indication: short circuit or overload of an output.
Four isolated groups. Electronic over-circuit protection per point. Fault indication:
short circuit or overload of an output, over temperature of an output driver.
One isolated group. Electronic over-circuit protection per point. Fault indication: short
circuit of an output.
One isolated group. Electronic over-circuit protection per group of four channels.
One isolated group. Electronic over-circuit protection per group of four channels.
Four isolated groups. Electronics over-circuit protection per point. Fault indication:
short circuit of an output.
Four isolated groups.
24 VDC
16 A max.
24 VDC
8A max.
24 VDC
3.2 A max.
24 VDC
8A max.
24 VDC
8A max.
24 VDC
24 VDC
1.6 A max.
100 mAmax. draw
100 mAmax. draw
50 mAmax. draw
100 mAmax. draw
100 mAmax. draw
100 mAmax. draw
100 mAmax. draw
Two isolated groups. Electronic over-circuit protection per point. Fault indication:
short circuit of an output.
Two isolated groups.
24 VDC
8A max.
120 oe 230 VAC
8A max.
100 mAmax. draw
100 mAmax. draw
PCPsupported. 3964 R-mode supported. 4 k byte buffer in send/receive direction.
PCP supported. Refer to module data sheet no. 0615 for further details. Fault indica-
tion: failure of +24 V I/O supply voltage, blown fuse at I/O supply voltage.
PCP supported. Refer to module data sheet no. 0614 for further details.
24 VDC
400 mAtypical
24 VDC
4A max.
24 VDC
130 mAmax. draw
220 mAmax. draw
280 mAmax. draw
Process data uptime: 2.5 ms per channel. Fault indication: failure of +24 V I/O supply
voltage, failure of a ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.
Process data update time: 1 ms per channel. Fault indication: failure of +24 V I/O
supply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.
Process data update time: 3 ms per channel. Fault indication: failure of +24 I/O sup-
ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.
Process data update time: 1 ms per channel. Fault indication: failure of +24 I/O sup-
ply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.
Process data update time: 1 ms per channel. Fault indication: failure of +24 V I/O
supply voltage, failure of ±15 V or +5 V I/O voltage, blown fuse at I/O supply voltage.
24 VDC
80 mAmax.
24 VDC
0.15 A max.
24 VDC
0.25 A max.
24 VDC
0.25 A max.
24 VDC
80 mAmax.
120 mAmax. draw
130 mAmax. draw
120 mAmax. draw
130 mAmax. draw
130 mAmax. draw
Dimensions
(W x H x D)
118 x 116 x 117
(mm)
81 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
81 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
81 x 116 x 117
(mm)
118 x 116 x 117
(mm)
44 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
118 x 116 x 117
(mm)
Each
525.00
210.00
245.00
320.00
480.00
385.00
480.00
505.00
650.00
400.00
480.00
660.00
270.00
290.00
395.00
360.00
610.00
340.00
400.00
549.00
700.00
1290.00
875.00
825.00
975.00
825.00
825.00
INTERBUS Inline System
INTERBUS Inline Components
Mfr.’s Type Order No. Description
IBSIL 24BK-T
IBIL 24BK-RB-T
IBIL 24L2
IBIL 24SEG
IBIL 24SEG/F
IBIL 24PWRIN
IBIL 24DI2
IBIL 24DI4
IBIL 24DI8
IBIL 24DI16
IBIL 24DO2-2A
IBIL 24DO4
IBIL 24DO8
IBIL 24D016
IBILAI2/SF
IBILAO1/U/SF
IBILAO1/SF
IBILTEMP2UTH
IBIL TEMP2RTD
2726188
2727941
2724886
2726324
2727747
2726311
2726201
2726214
2726227
2726230
2726243
2726256
2726269
2726272
2726285
2727776
2726298
2727763
2726308
INTERBUS Bus terminal, 24 VDC
Remote bus branch terminal, 24 VDC
Loop 2 branch terminal, 24 VDC
Segment terminal, 24 VDC, without fuse
Segment terminal, 24 VDC, with 6.3 A fuse
Power terminal, 24 VDC
Digital input terminal, 2-inputs, 24 VDC, 4-wire connection (PNPsensor)
Digital input terminal, 4-inputs, 24 VDC, 3-wire connection (PNPsensor)
Digital input terminal, 8-inputs, 24 VDC, 4-wire connection (PNPsensor)
Digital input terminal, 16-inputs, 24 VDC, 4-wire connection (PNPsensor)
Digital output terminal, 2-outputs, 24 VDC, 2 A, 4-wire connection
Digital output terminal, 4-outputs, 24 VDC, 500 mA, 3-wire connection
Digital output terminal, 8-outputs, 24 VDC, 500 mA, 4-wire connection
Digital output terminal, 16-outputs, 24 VDC, 500 mA, 3-wire connection
Analog input terminal, 2-inputs, 0 to 20 mA, 4 to 20 mA, -20 to +20 mA, 0
to 10 V, -10 to +10 V, 2-wire connection
Analog output terminal, 1 output, 0 to 10 V, 2- wire connection
Analog output terminal, 1 output, 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2-wire
connection
Thermocouple terminal, 2 inputs, 2- wire connection
RTD terminal, 2 inputs, 2-, 3- or 4- wire connections
Use Connector
Type
1
2
4 (4-required)
5 or 6
5 or 6
5 or 6
3 or 4
7 or 8
3 or 4 (4-required)
7 or 8 (4-required)
3 or 4
8 or 9
3 or 4 (4-required)
8 or 9 (4-required)
2 or 4
2 or 4
2 or 4
2 or 4
2 or 4
Each
230.00
150.00
210.10
16.00
24.00
18.75
32.00
48.50
90.00
180.00
68.00
64.00
118.00
218.00
262.00
145.00
168.00
295.00
295.00
The information on this page is an overview of the components in an Inline Automation Station. Detailed information is contained in data sheets for the listed ter-
minals or in the user manual INTERBUS Inline System Manual (order no. 2743048). Data sheets may be obtained through Phoenix Contact’s FAX-0N-DEMAND
System (800-944-9901) or by calling Carlton-Bates Company.
The INTERBUS Inline product family is a modular automation system that is integrated into an INTERBUS system. Inline modules are joined together to create
functional units which meet the requirements of the application. The control cabinet layout is designed by grouping the various I/O modules according to function.
Both communication and power routing is accomplished automatically with the physical interconnection between the I/O modules. Additional networking options
permit the network to branch to either a remote bus segment or Loop 2 segment.
Bus Terminals can accommodate up to 63 modules. A copper cable is used to couple it to INTERBUS, DeviceNet or Profibus networks.ARemote Bus Branch
Terminal is used for creating a remote bus branch and can only be inserted directly after the bus terminal. A Loop 2 Branch Terminal is used to extend the
Inline station via a Loop 2 segment. It is recommended that a Loop 2 branch terminal module be electrically isolated from the other Inline station components via
a power terminal (IRIL24PWRIN). I/O voltage is supplied to the I/O module via the integrated power bus built into each of the I/O modules. Segment Terminals
provide the ability to segment this I/O power for an individual module or group of I/O modules. Note that the maximum current allowed through the integrated
power bus is 8 amps. The Power Terminals provide power to the I/O circuit and allows electrical isolation. Power Terminals are also used when the current of
the integrated power bus could exceed 8 amps. Approvals: ULRecognized (U.S. and Canada).
Terminal Modules (connectors must be ordered separately)
Width
(mm)
48.8
12.2
48.8
12.2
12.2
12.2
12.2
12.2
48.8
48.8
12.2
12.2
48.8
48.8
12.2
12.2
24.4
12.2
12.2
Mfr.’s Type Order No. Description
IBILBK-PLSET
IBILSCN-6SHIELD
IBILSCN-8-CP
IBILSCN-8
IBILSCN-PWRIN-CP
IBILSCN-PWRIN
IBILSCN-12-ICP
IBILSCN-12
IBILSCN-12-OCP
IBILFIELD 2
IBILFIELD 8
ZBFM6-...
2727792
2726353
2727608
2726337
2727637
2727462
2727611
2726340
2727624
2727501
2727515
...
Connector set (4-connectors: 2-shielded,1-standard,1-power, black)
I/O shielded connector
I/O standard connector. color coded*
I/O standard connector, without color code
Power connector, black, color coded*
Power connector, black, without color code
I/O extended double signal connector, color coded**
I/O extended double signal connector, without color code
I/O extended double signal connector, color coded †
Connector
Type
1
2
3
4
5
6
7
8
9
Each
25.00
8.50
4.50
4.00
4.50
4.00
7.50
7.00
7.50
6.00
10.00
...
Connectors and Accessories
Labeling field for terminals with 12.2 mm or 24.4 mm widths
Labeling field for terminals with 48.8 mm widths
100 pc. marker sheet, several versions available (to order, see “Accessories for Terminal Blocks”)
*Color codes for standard and power connectors (1st row: w/o color print, 2nd row: red, 3rd row: blue, 4th row: green/yellow). **Color codes for extended -ICP
connectors (1st row: w/o color print (signals), 2nd row: red, 3rd row: blue, 4th row: w/o color print (signals), 5th row: red, 6th row: blue). † Color codes for extend-
ed -OCP connectors (1st row: w/o color print (signals), 2nd row: blue, 3rd row: green/yellow, 4th row: w/o color print (signals), 5th row: blue, 6th row: green/yellow).
System diagnostics LED
and status LED
Zach strip labeling
Snap-on labeling field
I/O connector
Potential routing
Communications
power routing
INTERBUS data routing
C o n n e c t i o n
D a t a : s p r i n g
clamps
AWG: 24-16
Module Height: 71.5 mm
Length: 116.1 mm (141.1mm
w/extended connector)
Legend
1 Bus Terminal
2 Remote Bus Branch Terminal
3 Segment Terminal
4 I/O Modules
5 Power Terminal
6 Loop 2 Branch Terminal
1 2 3 4 3 4 5 6
INTERBUS Inline Station
INTERBUS Loop 2 System
Mfr.’s Type Order No. Description
IBSL2IP24BK-T
IBL2BOX24PWRINDI4/4-M12
IBIL24L2
IBL2BOX24DI4/4M12
IBL2BOX24DI4/4M12-D
IBL2BOX24DI8/4M12
IBL2BOX24DO4/4M12-2A
IBL2BOX24DO4/4M12-2A-D
IBL2BOX24DIO2/2/4M12-2A
IBL2BOX24DIO2/2/4M12-2A-D
IBL2BOXAI2/2M12
IBL2BOXAO1/2/UM12
IBL2BOXAO1/2/IM12
IBL2BOXTEMP2/2M12
IBL2IP500MLR4-6A
2732376
2732392
2727886
2731982
2732761
2731995
2732347
2732774
2732004
2732787
2731908
2731940
2731937
2731924
2732389
Bus terminal with Loop 2 branch (data sheet 5880)
Power in module w/4 digital inputs, 24 VDC, 4-
wire, connection for additional power supply (data
sheet 5881)
Inline Loop 2 branch terminal, 24 VDC (data sheet
5662)
Digital input module, 4- inputs, 24 VDC, 4-wire
(data sheet 5870)
Same as above with internally cross-wired inputs
(data sheet 5989)
Digital input module, 8- inputs, 24 VDC, 4- wire
(data sheet 5873)
Digital output module, 4- outputs, 24 VDC, 2 A, 3-
wire (data sheet 5871)
Same as above with internally cross-wired outputs
(data sheet 5988)
Digital I/O module, 2-inputs, 24 VDC, 4- wire; 2-
outputs, 24 VDC, 2 A, 3-wire (data sheet 5872)
Same as above with internally, cross-wired inputs
and outputs (data sheet 5990)
Analog input module, 2- inputs, 0-10 VDC, 2-10
VDC, 0-20 mA, 4-20 mA, 2- wire (data sheet 5874)
Analog output module, 1- output, -10 VDC to +10
VDC, 2- wire (data sheet 5877)
Analog output module, 1- output, 0-20 mA, 4-20
mA, 2- wire (call for data sheet)
Analog input thermocouple/RTD module, 2-inputs,
RTD, TC, 2, 3 and 4- conductor sensors, 2- wire
(data sheet 5875)
Motor starter, machine mounted, 4- channels, 500
VAC, 6 A (call for data sheet)
Each
585.00
198.00
210.00
138.00
138.00
198.00
182.00
182.00
174.00
174.00
360.00
290.00
290.00
360.00
1512.00
The information on this page is an overview of the components that make up
the Loop 2 product family. Detailed information is contained in data sheets or
in the INTERBUS Loop 2 System Manual (order no. 2743491). Data sheets
may be obtained from either Phoenix Contact’s Website INLINEIO.com, FAX-
ON-DEMAND System (800-944-9901) or by calling Carlton-Bates.
INTERBUS Loop 2 products combine user data signals with power for bus
devices and transmit both signals through an unshielded 2-wire cable.
Additionally, INTERBUS Loop 2 modules with IP67 protection, can be directly
integrated into an Inline station by means of a branch terminal. Circuits are
displayed with built-in diagnostic LED’s and all modules use the solderless
QUICKON connectors, eliminating the need for tools and striping of the con-
ductors.
The machine mountable Bus Terminal can support up to 63 devices. In the
event the minimum voltage for a device (19.2V) is not achievable or the maxi-
mum current load (1.8 A) is exceeded, the Power In Module should be used
to re-establish these power requirements. The Inline Loop 2 Branch
Terminal permits a seamless integration of the Loop 2 product offering into an
Inline station. Approvals: ULRecognized (U.S. and Canada).
Loop 2 Components
Fig.
1
2
*
3
3
3
2
2
2
2
4
4
4
4
5
System Parameters
Cable length between 2 devices. . . . .20 m (65.6 ft) max.
Cable length in a loop. . . . . . . . . . . . .200 m (656.2 ft) max.
Current load in a loop. . . . . . . . . . . . . 1.8 A max.
Voltage on a device. . . . . . . . . . . . . . .19.2 V min.
Number of devices in a loop. . . . . . . . 63 max.
Legend
1- Loop 2
2- Loop 2 network cable
3- Loop 2 connector set
Mfr.’s Type Order No. Description
IBSLSLCCU2/1.5-METER
IBSLPSCCU3/1.5-METER
IBSINBCMETER
SABCG/PG9
IBSIPPROTI/O
IBSLMLRPLSET4-6A
2721620
2722137
2723136
1662133
2759919
2724533
Loop 2 network cable, green, 2-cond., AWG 16 (priced per
meter)
Loop 2 actuator supply cable, black, 3- cond., AWG 16 (priced
per meter)
INTERBUS network with power cable (priced per meter)
Cable gland set (PG9), threaded, for INTERBUS connections
on Loop 2 bus terminal (2 pcs./pkg.)
Protective caps for unused M12 sockets
Loop 2 connector set (includes PG glands) for motor starter
Each
1 . 6 0 / m t r
2 . 3 0 / m t r.
7 . 8 0 / m t r.
5 . 9 5 / m t r.
1.63
95.00
Accessories
*not shown. For information on this product see “INTERBUS Inline System”.
Legend
1. Bus terminal
2. Loop 2 network cable
3. Loop 2 actuator supply cable
4. Cable gland set ( 2 x PG9)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Legend
1 Field Mountable Bus Terminal
2 Machine Mountable I/O Modules
• Analog
• Digital
•Temperature
3 Machine Mountable Motor
Starter
4 Power Distribution Module with
Digital Inputs
