Intermatic WP1000C Receptacle Manual Installation Directions

264107-Installation 264107-Installation 264107-Installation 078275 Batch4 unilog cesco-content

2014-06-02

: Pdf 264107-Installationsheet 264107-InstallationSheet 078275 Batch4 unilog

Open the PDF directly: View PDF PDF.
Page Count: 1

DownloadIntermatic WP1000C Receptacle Manual  Installation Directions
Open PDF In BrowserView PDF
8.5”

158WP11822

CORD
OUTLETS

WP1000 SERIES GUARDIAN
WEATHERPROOF RECEPTACLE COVERS

SERIE WP1000 GUARDIAN
CUBIERTAS DE RECEPTÁCULO PARA LA INTEMPERIE

This GUARDIAN weatherproof cover can be used outdoors or in other wet
locations (protects receptacles while in use for unattended applications). The
cover is UL listed and meets the requirements for all outdoor low voltage
landscape lighting as defined by UL 1838. It also meets UL and CSA Cold Impact
Testing at -60°F (-51°C), is CSA certified, NEMA 3R rated and meets National
Electrical Code requirements covered by Article 406.8(B).

Esta cubierta GUARDIAN a prueba de intemperie se puede utilizar en exteriores
y en lugares con humedad (protege los receptáculos en operaciones no atendidas). La cubierta tiene la aprobación UL y cumple los requisitos definidos en UL
1838 para la iluminación de bajo voltaje en jardines. También cumple las pruebas de impacto del frío a -60°F (-51°C) de UL y CSA, con la certificación CSA y
la clasificación NEMA 3R, y cumple lo dispuesto en la sección 406.8(B) del
Código Eléctrico Nacional de EE.UU.

DUPLEX
HORIZONTAL

GFCI
HORIZONTAL

Contents
The following items are included:

SALIDAS
DE CABLE

• Weatherproof cover, base and gasket

Contenido
Se han incluido los siguientes artículos

• Toggle, round, GFCI and duplex inserts

• Cubierta, base y junta para la intemperie

• Baggie assembly with mounting hardware

• Insertos acodado, redondo, GFCI y dúplex

HORIZONTAL
DÚPLEX

HORIZONTAL
GFCI

• Bolsa con tornillos de montaje
Models
These instructions cover these models:
WP1000C Single gang - Vertical
WP1010C Single gang - Vertical
WP1000HC Single gang - Horizontal
WP1010HC Single gang - Horizontal

Modelos
Las instrucciones son aplicables a estos modelos:
WP1000C Multipolar - Vertical
WP1010C Multipolar - Vertical
WP1000HC Multipolar - Horizontal
WP1010HC Multipolar - Horizontal

LOCKABLE
TAB

Installation
Follow the steps listed at right while referring to the illustrations below.

LENGÜETA
BLOQUEABLE

Instalación
Siga los pasos enumerados y consulte las ilustraciones a que hacen referencia.

CAUTION: IF USING A POWER SCREW-DRIVER, BE CAREFUL NOT TO OVERTIGHTEN SCREWS–YOU WILL STRIP THE THREADS ON THE JUNCTION BOX
AND/OR ELECTRICAL DEVICE.

PRECAUCIÓN: SI UTILIZA UN DESTORNILLADOR ELÉCTRICO, TENGA CUIDADO DE NO APRETAR EN EXCESO LOS TORNILLOS O DAÑARÁ LAS ROSCAS EN
LA CAJA DE EMPALMES Y/O EL DISPOSITIVO ELÉCTRICO.

1. DISCONNECT POWER to the receptacle at the circuit breaker panel before
installing.
2. If installing on an existing receptacle, remove the existing cover/gasket and
discard.
3. Select the right insert for the application and press into bass. If you need to
remove the knock-outs on the round insert, grab them from the back with a
pliers and pry down until they break free. If using the round insert, knock
out the appropriate hole size (see Knockout Removal).

CORD
OUTLETS

11”
DUPLEX
VERTICAL

FOLD
LINES
(TYP)

GFCI
VERTICAL

4. The base should be installed on a smooth, flat surface. To ensure a weatherproof seal on surfaces such as brick or cedar siding, a 1/4” bead of nonhardening silicon caulk should be placed between the gasket and mounting
surface.
5. Mount the base/insert assembly and the receptacle(s) to the junction box
using two of the long screws provided. To ensure weatherproof protection,
the hinges must be located at the top with the cord on the bottom. If mounting to an outdoor junction box or FS box, use the remaining long screws to
further secure the base/insert assembly to the junction box, using the existing holes. For specially designed boxes, mounting holes should be drilled to
line up with the holes in the box.

FOR BEST PROTECTION FROM RAIN OR HUMIDITY, BE SURE TO ROUTE THE
CORDS THROUGH THE CORD KNOCKOUTS IN THE COVER AND PRESS THE
COVER FIRMLY UNTIL IT SNAPS CLOSED OVER THE HASP.
DO NOT USE IF INCORRECT CORD KNOCKOUTS ARE REMOVED.
CAUTION: DISCONNECT POWER TO THE
DEVICE AT THE CIRCUIT BREAKER PANEL
BEFORE INSTALLING THIS RECEPTACLE
COVER.

SALIDAS
DE CABLE

2. Si la instalación fuera sobre un receptáculo existente, retire la cubierta/junta
actual y deséchela.
3. Seleccione el inserto adecuado a su aplicación y presiónelo dentro de la base.
Si tiene que extraer las tapas de cables del inserto redondo, presiónelas hacia
abajo con unos alicates en la parte trasera hasta que se suelten. Si va a
instalar el inserto redondo, extraiga la tapa del orificio del tamaño correcto
(véase Extracción de tapa de cables).

VERTICAL
DÚPLEX
VERTICAL
GFCI

4. La base se debe situar en una superficie plana y nivelada. Para garantizar la
selladura a prueba de intemperie sobre superficies como el ladrillo o los
rodapiés de madera, es necesario colocar un cordón de 1/4” pulg de pasta de
silicona no endurecedora entre la junta y la superficie de montaje.
5. Monte el conjunto de base/inserto y uno o varios receptáculos dentro de la
caja de empalmes utilizando los dos tornillos largos suministrados. Para
garantizar la selladura a prueba de intemperie, los goznes deben estar
situados hacia arriba mientras que el cable debe estar debajo. Si desea
montar el conjunto en una caja de empalmes en exteriores o en una caja FS,
utilice los tornillos largos restantes para fijar la base/inserto en la caja a
través de los orificios existentes. En el caso de cajas de empalmes con un
diseño especial, habrá que perforar orificios que se alineen con los de esas
cajas.

Includes these inserts
Vertical or horizontal installation
Only for use with GUARDIAN Weatherproof covers

Knockout removal

7. Be sure all screws are secure but not over-tightened. Install the remaining
short screws into the receptacle as required
8. To open, bend back the plastic latch while lifting the cover. A hasp is
provided for padlocking (see right).

1. DESCONECTE LA ALIMENTACIÓN del receptáculo en el panel de interruptores
general antes de instalarlo.

Limited One Year Warranty
If within one (1) year from the date of purchase, this product fails due to a defect in material or workmanship,
Intermatic Incorporated will repair or replace it, at its sole option, free of charge This warranty is extended to
the original household purchaser only and is not transferable Th s warranty does not apply to (a) damage to
un ts caused by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units which have
been subject to unauthorized repair, opened, taken apart or otherwise modified; (c) units not used in accordance
with instructions; (d) damages exceeding the cost o the product; (e) sealed lamps and/or lamp bulbs, LED’s
and batteries; (f) the finish on any portion of the product, such as surface and/or weathering, as this is
considered normal wear and tear; (g) transit damage, initial installation costs, removal costs, or reinstallation
costs

7. Compruebe que todos los tornillos estén bien apretados, no los apriete en
exceso. Instale los tornillos cortos restantes en el receptáculo como se
requiera.
8. Para abrir la cubierta, doble hacia atrás el enganche de plástico y levántela.
Se proporciona una lengüeta de cierre bloqueable (véase a la derecha).

INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU THIS WARRANTY IS
IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES ALL IMPLIED WARRANTIES, INCLUDING
THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND
SHALL BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE SOME STATES DO
NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU

PARA UNA ÓPTIMA PROTECCIÓN CONTRA LA LLUVIA Y LA HUMEDAD, LOS
CABLES DEBEN CONDUCIRSE A TRAVÉS DE LAS TAPAS EN LA CUBIERTA,
PRESIONANDO ÉSTA FIRMEMENTE HASTA CERRARLA SOBRE LA LENGÜETA.
NO UTILIZAR SI SE HAN EXTRAÍDO LAS TAPAS DE CABLES INCORRECTAS.

This warranty service is available by either (a) retu ning the product to the dealer from whom the unit was
purchased, or (b) mailing the product, along with proof of purchase, postage prepa d to the authorized service
center listed below This warranty is made by Intermatic Incorporated/After Sales Service/7777 Winn Rd ,
Spring Grove, Illinois 60081 9698/815 675 7000 http //www intermatic com Please be sure to wrap the product
securely to avoid shipping damage

INTERM
MATIC
C IN
NCORP
PORA
ATED
D,

SPRING GROVE, ILLINOIS 60081-9698

PRECAUCIÓN: DESCONECTAR LA ALIMENTACIÓN
DEL DISPOSITIVO EN EL PANEL DE INTERRUPTORES GENERAL ANTES DE INSTALAR LA
CUBIERTA DEL RECEPTÁCULO.

158WP11822

Incluye estos insertos
Instalación vertical u horizontal
Para utilizar con cubiertas GUARDIAN
para la intemperie solamente

Extracción de tapa
de cables
Garantía limitada de 1 año
Si en el plazo de un (1) año contado desde la fecha de compra, el producto fal a debido a un defecto de material
o mano de obra, Intermatic Incorporated lo reparará o reemplazará, a su juicio, sin costo alguno La garantía
se otorga al comprador original y no es transferible Esta garantía no se aplica en los s guientes casos (a)
daños en las unidades causados por accidentes, caídas o el uso indebido; causas de fuerza mayor o uso
negligente; (b) unidades que hayan sido sometidas a una reparación no autorizada, abiertas, desmontadas o
mod ficadas de otra forma; (c) unidades no utilizadas según las instrucciones; (d) daños que excedan del costo
del producto; (e) lámparas selladas y/o bombi las de lámparas, indicadores LED y baterías; (f) el acabado de
cualquier parte del producto, como su superficie y/o por exposición a la intemperie, ya que esto se cons dera
un desgaste normal; (g) daños durante el transporte, costos de instalación inicial, costos de retirada, o costos
de reinstalación
INTERMATIC INCORPORATED NO ASUME RESPONSABILIDAD ALGUNA POR DAÑOS INDIRECTOS O
CONSECUENTES ALGUNOS ESTADOS NO PERMITEN EXCLUIR O LIMITAR LOS DAÑOS INDIRECTOS
O CONSECUENTES, POR LO QUE LA LIMITACIÓN O EXCLUSIÓN ANTERIOR PUDIERA NO SER VÁLIDA
EN SU CASO ESTA GARANTÍA SUSTITUYE A CUALQUIER OTRA GARANTÍA EXPRESA O IMPLÍCITA
TODAS LAS GARANTÍAS IMPLÍCITAS, INCLUIDA LA GARANTÍA DE IDONEIDAD COMERCIAL O DE
IDONEIDAD PARA UN DETERMINADO FIN, SE MODIFICAN PARA QUEDAR INCLUIDAS EN LA PRESENTE
GARANTÍA LIMITADA, Y TENDRÁN LA MISMA DURACIÓN QUE EL PERIODO DE GARANTÍA
MENCIONADO ALGUNOS ESTADOS NO PERMITEN LIMITAR LA DURACIÓN DE UNA GARANTÍA
IMPLÍCITA, POR LO QUE LA LIMITACIÓN ANTERIOR PUDIERA NO SER APLICABLE EN SU CASO
El servicio de garantía está disponible (a) mediante devolución del producto al distribuidor al que se adquirió,
o (b) enviando el producto, acompañado de su prueba de compra, por correo postal prepagado a un centro de
servicio autorizado enumerado en la lista Esta garantía es concedida por Intermatic Incorporated/After Sales
Service/7777 Winn Rd , Spring Grove, Illinois 60081 9698/815 675 7000 http //www intermatic com
Asegúrese de envolver bien el producto para evitar daños durante el transporte

IN
NTER
RMATIC
C IN
NCORPORATED
D,

SPRING GROVE, ILLINOIS 60081-9698

158WP11822

BACK

FRONT

SEE B/M FOR ALL PART NUMBERS & QUANTITIES
ITEM

CHKD.: MCzyz 11/16/2004
SCALE

NOTES:
ALL PRINTING TO BE AS PER INTERMATIC
APPROVED ARTWORK.

3
2
1
LET.

SRB

6/1/2005
REV DRWG TO SHOW SPANISH (NO ECO)
SRB
5/1/2005
REV DRWG TO ADD FOLD LINES
RELEASED TO ELECT. DATA

APPROVED
3-DAE 6/1/2005

PT. NO.

DESC.

INTERMATIC INCORPORATED

DR.: SRB 11/16/2004
NAME:
MATL.:
FINISH:

INST SHT - WP1000
WHITE PAPER STOCK
BLACK PRINTING INK

HEAT TREAT:
DIM
TOL

:

FRACTIONS + .010 . DECIMALS AS SPECIFIED - ANGLES + 1/2˚
ALL DIMENSIONS MUST BE MET BEFORE PLATING.

QUAN.



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Intermatic WP1000C Receptacle Manual
Title (x-repair)                : Intermatic WP1000C Receptacle Manual
Description                     : Buy Intermatic WP1000C weatherproof receptacle cover. Ensure your outlets are secure even in harsh weather. Great prices and fast shipping at 1000Bulbs.com!
Description (x-repair)          : Buy Intermatic WP1000C weatherproof receptacle cover. Ensure your outlets are secure even in harsh weather. Great prices and fast shipping at 1000Bulbs.com!
Creator                         : 1000bulbs.com
Subject                         : intermatic wp1000c, weatherproof receptacle cover, single gang cover, 7827502251, receptacle cover, outlet cover, outlet plug cover, electrical outlet cover, power outlet cover
Producer                        : iTextSharp 4.1.6 by 1T3XT
Keywords                        : intermatic wp1000c, weatherproof receptacle cover, single gang cover, 7827502251, receptacle cover, outlet cover, outlet plug cover, electrical outlet cover, power outlet cover
Create Date                     : 2013:07:25 10:23:20-05:00
Modify Date                     : 2013:11:19 15:01:11-06:00
Metadata Date                   : 2013:11:19 15:01:11-06:00
Document ID                     : uuid:6e8d4c98-7cf5-4775-8630-05c3269ac997
Instance ID                     : uuid:f26298b3-42d9-4867-85de-ac264d2e09b2
Page Count                      : 1
Author                          : 1000bulbs.com
EXIF Metadata provided by EXIF.tools

Navigation menu