R 304238 000100 V100480
2016-10-17
: Pdf 304238-000100 V100480 304238-000100_v100480 CertsReports 304238 ProductFiles
Open the PDF directly: View PDF 
.
Page Count: 39
| Download | |
| Open PDF In Browser | View PDF |
Test Report. No. CANEC1605855701 Date: 21 Apr 2016 . Page 1 of 10. HOPERISE CONDUCTOR(DONGGUAN) COMPANY LIMITED . QIAO ZI REGION CHANGPING TOWN,DONGGUAN CITY,GUANGDONG PROVINCE CHINA. . The following sample(s) was/were submitted and identified on behalf of the clients as : TINNED COPPER WIRE. SGS Job No. : CP16-020052 - GZ . Client Ref. Info. : . Sample Description:silvery plating on metal . Material:Base material Cu . Sample Description:silver color plating . Date of Sample Received : . 11 Apr 2016. Testing Period : . 11 Apr 2016 - 18 Apr 2016 . Test Requested : . Selected test(s) as requested by client. . Test Method : . Please refer to next page(s). . Test Results :. Please refer to next page(s). . Conclusion :. Based on the performed tests on submitted sample(s), the results of Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBBs), Polybrominated diphenyl ethers (PBDEs) comply with the limits as set by RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU. . Signed for and on behalf of SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch. Echo Yeung. Approved Signatory . Test Report. No. CANEC1605855701 Date: 21 Apr 2016 . Page 2 of 10. Test Results :. Test Part Description : . Specimen No.. SN1. SGS Sample ID. CAN16-058557.001 Description. Silvery plated metal . Remarks :. (1) 1 mg/kg = 1 ppm = 0.0001% . (2) MDL = Method Detection Limit . (3) ND = Not Detected ( < MDL ) . (4) "-" = Not Regulated . RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU. Test Method : . (1)With reference to IEC 62321-5:2013, determination of Cadmium by ICP-OES. (2)With reference to IEC 62321-5:2013, determination of Lead by ICP-OES. (3)With reference to IEC 62321-4:2013, determination of Mercury by ICP-OES. (4)With reference to IEC 62321-7-1:2015 , determination of Hexavalent Chromium by Colorimetric Method using UV-Vis. (5)With reference to IEC 62321-6:2015, determination of PBBs and PBDEs by GC-MS. . Test Item(s). Limit. Unit. MDL. 001. Cadmium (Cd) . 100 mg/kg. 2 ND Lead (Pb). 1,000 mg/kg. 2 5 Mercury (Hg). 1,000 mg/kg. 2 ND Hexavalent Chromium (Cr(VI))▼ . -. µg/cm². 0.10 ND 1,000 mg/kg. - ND Monobromobiphenyl . - mg/kg. 5 ND Dibromobiphenyl . - mg/kg. 5 ND Tribromobiphenyl . - mg/kg. 5 ND Tetrabromobiphenyl . - mg/kg. 5 ND Pentabromobiphenyl . - mg/kg. 5 ND Hexabromobiphenyl . - mg/kg. 5 ND Heptabromobiphenyl . - mg/kg. 5 ND Octabromobiphenyl . - mg/kg. 5 ND Nonabromobiphenyl . - mg/kg. 5 ND Sum of PBBs . Decabromobiphenyl . Sum of PBDEs . Monobromodiphenyl ether . - mg/kg. 5 ND 1,000 mg/kg. - ND - mg/kg. 5 ND Test Report. No. CANEC1605855701 Date: 21 Apr 2016 . Limit. Unit. MDL. 001. Dibromodiphenyl ether . - mg/kg. 5 ND Tribromodiphenyl ether . - mg/kg. 5 ND Tetrabromodiphenyl ether . - mg/kg. 5 ND Pentabromodiphenyl ether . - mg/kg. 5 ND Hexabromodiphenyl ether . - mg/kg. 5 ND Heptabromodiphenyl ether . - mg/kg. 5 ND Octabromodiphenyl ether . - mg/kg. 5 ND Nonabromodiphenyl ether . - mg/kg. 5 ND Decabromodiphenyl ether . - mg/kg. 5 ND Test Item(s). Page 3 of 10. Notes :. (1) The maximum permissible limit is quoted from RoHS Directive (EU) 2015/863. (2) ▼= a. The sample is positive for CrVI if the CrVI concentration is greater than 0.13 μg/cm2. The sample coating is considered to contain CrVI b. The sample is negative for CrVI if CrVI is ND (concentration less than 0.10 μg/cm2). The coating is considered a non-CrVI based coating c. The result between 0.10 μg/cm2 and 0.13 μg/cm2 is considered to be inconclusive unavoidable coating variations may influence the determination Information on storage conditions and production date of the tested sample is unavailable and thus Cr(VI) results represent status of the sample at the time of testing. IEC 62321 series is equivalent to EN 62321 series http://www.cenelec.eu/dyn/www/f? p=104:30:1742232870351101::::FSP_ORG_ID, FSP_LANG_ID:1258637,25 . Polycyclic Aromatic Hydrocarbons (PAHs). Test Method : . With reference to AfPS GS 2014:01 PAK, analysis was performed by GC-MS. . CAS NO. Unit. Naphthalene(NAP) . Test Item(s). 91-20-3. mg/kg. Acenaphthylene(ANY) . 208-96-8. mg/kg. Acenaphthene(ANA) . 83-32-9. mg/kg. Fluorene(FLU) . 86-73-7. mg/kg. Phenanthrene(PHE) . 85-01-8. mg/kg. Anthracene(ANT) . 120-12-7. mg/kg. Fluoranthene(FLT) . 206-44-0. mg/kg. Pyrene(PYR) . 129-00-0. mg/kg. Benzo(a)anthracene(BaA) . 56-55-3. mg/kg. Chrysene(CHR) . 218-01-9. mg/kg. Benzo(b)fluoranthene(BbF) . 205-99-2. mg/kg. MDL. 0.1. 0.1. 0.1. 0.1. 0.1. 0.1. 0.1. 0.1. 0.1. 0.1. 0.1. 001. ND. ND. ND. ND. ND. ND. ND. ND. ND. ND. ND. Test Report. No. CANEC1605855701 Test Item(s). Date: 21 Apr 2016 . CAS NO. Unit. Benzo(j)fluoranthene(BjF) . 205-82-3. mg/kg. Benzo(k)fluoranthene(BkF) . 207-08-9. mg/kg. Benzo(a)pyrene(BaP) . 50-32-8. mg/kg. Benzo(e)pyrene(BeP) . 192-97-2. mg/kg. Indeno(1,2,3-c,d)pyrene(IPY) . 193-39-5. mg/kg. Dibenzo(a,h)anthracene(DBA) . 53-70-3. mg/kg. Benzo(g,h,i)perylene(BPE) . 191-24-2. mg/kg. -. mg/kg. -. mg/kg. Sum of 7 PAHs Acenaphthylene. Acenaphthene, Fluorene, Phenanthrene, Pyrene, Anthracene, Fluoranthene . Sum of 18 PAHs . Page 4 of 10. MDL. 0.1. 0.1. 0.1. 0.1. 0.1. 0.1. 0.1. - - 001. ND. ND. ND. ND. ND. ND. ND. ND. ND. Test Report. No. CANEC1605855701 Date: 21 Apr 2016 . PFOS (Perfluorooctane sulfonates). Test Method : . With reference to CEN/TS15968:2010, analysis was performed by LC-MS. . Page 5 of 10. Test Report. Test Item(s). Perfluorooctane Sulfonates (PFOS)^ . No. CANEC1605855701 Date: 21 Apr 2016 . CAS NO. -. Unit. µg/m². Page 6 of 10. MDL. 1.0. 001. ND. Notes :. (1) ^ PFOS refer to Perfluorooctanesulfonic acid and its derivatives including Perfluoroctanesulfonic acid, Perfluoroctane sulfonamide, N-Methylperfluoroctane sulfonamide, N-Ethylperfluoroctane sulfonamide, N-Methylperfluoroctane sulfonamidoethanol and N-Ethylperfluoroctane sulfonamidoethanol. . Test Report. No. CANEC1605855701 Date: 21 Apr 2016 . Page 7 of 10. ATTACHMENTS Pb/Cd/Hg/Cr6+/PBBs/PBDEs Testing Flow Chart 1) Name of the person who made testing: Bruce Xiao / Sunny Hu 2) Name of the person in charge of testing: Bella Wang / Cutey Yu 3) These samples were dissolved totally by pre-conditioning method according to below flow chart (Cr6+ and PBBs/PBDEs test method excluded ). Sample Preparation Sample Measurement Pb/Cd/Hg Acid digestion with microwave/ hotplate Sample solvent extraction Filtration Concentration/ Dilution of extraction solution Solution Residue Filtration 1) Alkali Fusion / Dry Ashing 2) Acid to dissolve ICP-OES/AAS DATA Cr6+ PBBs/PBDEs GC-MS DATA Nonmetallic material Metallic material Adding digestion reagent Boiling water extraction Heating to 90~95℃ for extraction Filtration and pH adjustment Adding 1,5diphenylcarbazide for color development UV-Vis DATA Adding 1,5diphenylcarbazide for color development UV-Vis DATA Test Report. No. CANEC1605855701 Date: 21 Apr 2016 . ATTACHMENTS PFOA / PFOS Testing Flow Chart 1) Name of the person who made testing: Zhihong Wang 2) Name of the person in charge of testing: Cutey Yu Sample cutting / preparation Sample Measurement Solvent extraction Concentration/Dilution Filtration LC-MS DATA Page 8 of 10. Test Report. No. CANEC1605855701 ATTACHMENTS PAHs Testing Flow Chart 1) Name of the person who made testing: Sunny Hu 2) Name of the person in charge of testing: Cutey Yu Sample cutting / preparation Sample Measurement Solvent extraction Concentration/Dilution Filtration GC-MS DATA Date: 21 Apr 2016 . Page 9 of 10. Test Report. No. CANEC1605855701 Date: 21 Apr 2016 . Sample photo: . CANEC1605855701 CAN16-058557.001 . SGS authenticate the photo on original report only . *** End of Report *** . Page 10 of 10. Test Report No. : CE/2015/92215 Page: 1 of 6 Date : 2015/09/11 *CE/2015/92215* SHINKONG SYNTHETIC FIBERS CORPORATION (SHINKONG INDUSTRY (HANGZHOU) CO., LTD) 8F., NO. 123, SEC. 2, NANKING E. RD., TAIPEI, TAIWAN (NO.1, AVENUE 6, ECONOMY & TECHNOLOGY DEVELOPMENT ZONE, HANGZHOU, CHINA) The following sample(s) was/were submitted and identified by/on behalf of the applicant as : Sample Submitted By Sample Description Style/Item No. Manufacturer/Vendor Country of Origin Sample Receiving Date Testing Period : : : : : : : SHINKONG SYNTHETIC FIBERS CORPORATION THERMOPLASTIC POLYESTER RESIN SHINITE® PBT E202G30BK SHINKONG SYNTHETIC FIBERS CORPORATION TAIWAN 2015/09/08 2015/09/08 TO 2015/09/11 ============================================================================================ Test Requested : As specified by client, with reference to RoHS Directive 2011/65/EU Annex II to determine Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs contents in the submitted sample. Test Method : Please refer to next pages. Test Result(s) : Please refer to next page(s). This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /新北市五股區新北產業園區五權七路25號 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report No. : CE/2015/92215 Page: 2 of 6 Date : 2015/09/11 *CE/2015/92215* SHINKONG SYNTHETIC FIBERS CORPORATION (SHINKONG INDUSTRY (HANGZHOU) CO., LTD) 8F., NO. 123, SEC. 2, NANKING E. RD., TAIPEI, TAIWAN (NO.1, AVENUE 6, ECONOMY & TECHNOLOGY DEVELOPMENT ZONE, HANGZHOU, CHINA) Test Result(s) PART NAME No.1 ： BLACK PLASTIC PELLETS Unit Method MDL Cadmium (Cd) mg/kg With reference to IEC 62321-5: 2013 and performed by ICP-AES. 2 Result No.1 n.d. Lead (Pb) mg/kg With reference to IEC 62321-5: 2013 and performed by ICP-AES. 2 10.2 Mercury (Hg) mg/kg With reference to IEC 62321-4: 2013 and performed by ICP-AES. 2 n.d. Hexavalent Chromium Cr(VI) mg/kg With reference to IEC 62321: 2008 and performed by UV-VIS. 2 n.d. Sum of PBBs Monobromobiphenyl Dibromobiphenyl Tribromobiphenyl Tetrabromobiphenyl Pentabromobiphenyl Hexabromobiphenyl Heptabromobiphenyl Octabromobiphenyl Nonabromobiphenyl Decabromobiphenyl Sum of PBDEs Monobromodiphenyl ether Dibromodiphenyl ether Tribromodiphenyl ether Tetrabromodiphenyl ether Pentabromodiphenyl ether Hexabromodiphenyl ether Heptabromodiphenyl ether Octabromodiphenyl ether Nonabromodiphenyl ether Decabromodiphenyl ether mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. n.d. Test Item(s) With reference to IEC 62321-6: 2015 and performed by GC/MS. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /新北市五股區新北產業園區五權七路25號 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report No. : CE/2015/92215 Date : 2015/09/11 Page: 3 of 6 *CE/2015/92215* SHINKONG SYNTHETIC FIBERS CORPORATION (SHINKONG INDUSTRY (HANGZHOU) CO., LTD) 8F., NO. 123, SEC. 2, NANKING E. RD., TAIPEI, TAIWAN (NO.1, AVENUE 6, ECONOMY & TECHNOLOGY DEVELOPMENT ZONE, HANGZHOU, CHINA) Note： 1. mg/kg = ppm；0.1wt% = 1000ppm 2. n.d. = Not Detected 3. MDL = Method Detection Limit 4. " - " = Not Regulated This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /新北市五股區新北產業園區五權七路25號 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report No. : CE/2015/92215 Date : 2015/09/11 Page: 4 of 6 *CE/2015/92215* SHINKONG SYNTHETIC FIBERS CORPORATION (SHINKONG INDUSTRY (HANGZHOU) CO., LTD) 8F., NO. 123, SEC. 2, NANKING E. RD., TAIPEI, TAIWAN (NO.1, AVENUE 6, ECONOMY & TECHNOLOGY DEVELOPMENT ZONE, HANGZHOU, CHINA) 1) These samples were dissolved totally by pre-conditioning method according to below flow chart. 6+ （Cr test method excluded） 2) Name of the person who made measurement: Climbgreat Yang 3) Name of the person in charge of measurement: Troy Chang Cutting / Preparation Cr6＋ Sample Measurement Hg Pb、Cd Acid digestion by suitable acid depended on different sample material (as below table) Microwave digestion with HNO3/HCl/HF Add appropriate amount of digestion reagent Heat to appropriate temperature to extract Filtration Residue Solution 1) Alkali Fusion 2) HCl to dissolve ICP-AES Sample Material Digestion Acid Steel, copper, aluminum, solder Aqua regia, HNO3, HCl, HF, H2O2 Glass HNO3/HF Gold, platinum, palladium, ceramic Aqua regia Silver HNO3 Plastic H2SO4, H2O2, HNO3, HCl Added appropriate reagent to total digestion Others (Note**) Cool, filter digestate through filter Add diphenyl-carbazide for color development measure the absorbance at 540 nm by UV-VIS Note**：(1) For non-metallic material, add alkaline digestion reagent and heat to 90~95℃. (2) For metallic material, add pure water and heat to boiling. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /新北市五股區新北產業園區五權七路25號 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report No. : CE/2015/92215 Date : 2015/09/11 Page: 5 of 6 *CE/2015/92215* SHINKONG SYNTHETIC FIBERS CORPORATION (SHINKONG INDUSTRY (HANGZHOU) CO., LTD) 8F., NO. 123, SEC. 2, NANKING E. RD., TAIPEI, TAIWAN (NO.1, AVENUE 6, ECONOMY & TECHNOLOGY DEVELOPMENT ZONE, HANGZHOU, CHINA) PBB/PBDE analytical FLOW CHART Name of the person who made measurement: Roman Wong Name of the person in charge of measurement: Troy Chang First testing process Optional screen process Sample Confirmation process Sample pretreatment Screen analysis Sample extraction/ Soxhlet method Concentrate/Dilute Extracted solution Filter Analysis by GC/MS Issue Report This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /新北市五股區新北產業園區五權七路25號 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report No. : CE/2015/92215 Page: 6 of 6 Date : 2015/09/11 *CE/2015/92215* SHINKONG SYNTHETIC FIBERS CORPORATION (SHINKONG INDUSTRY (HANGZHOU) CO., LTD) 8F., NO. 123, SEC. 2, NANKING E. RD., TAIPEI, TAIWAN (NO.1, AVENUE 6, ECONOMY & TECHNOLOGY DEVELOPMENT ZONE, HANGZHOU, CHINA) #PIC * The tested sample / part is marked by an arrow if it's shown on the photo. * ** End of Report ** This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Termse-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of client’s instruction, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced, except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. SGS Taiwan Ltd. 台灣檢驗科技股份有限公司 25, Wu Chyuan 7th Road, New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan /新北市五股區新北產業園區五權七路25號 t+886 (02)2299 3939 f+886 (02)2299 3237 www.sgs.tw Member of the SGS Group Test Report Page 1 of 4 Report No. SCL01I004140008 Applicant Address TONG BAO METAL & PLATING FACTORY NIU QUN PU INDUSTRIAL ZONE ,CHANG SHOU ROAD , JIU TAN , YUAN ZHOU TOWN, BO LUO COUNTY,HUIZHOU CITY, GUANGDONG PROVINCE, P,R,CHINA The following sample(s) and sample information was/were submitted and identified by/on the behalf of the client Sample Name Nickel -Plate Color Sample Received Date Testing Period Silvery gray Jan. 16, 2016 Jan. 16, 2016 to Jan. 20, 2016 Test Requested As specified by client, to test Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent Chromium(Cr(VI)), Perfluorooctane Sulfonates(PFOS), Perfluorooctanoic Acid(PFOA) in the submitted sample(s). Test Method Test Item(s) Test Method Measured Equipment(s) Lead (Pb) Refer to IEC 62321-5:2013 Ed.1.0 ICP-OES Cadmium (Cd) Refer to IEC 62321-5:2013 Ed.1.0 ICP-OES Mercury (Hg) Refer to IEC 62321-4:2013 Ed.1.0 ICP-OES Hexavalent Chromium(Cr(VI)) IEC 62321-7-1:2015 UV-Vis Perfluorooctane Sulfonates(PFOS) Refer to US EPA 3550C:2007 & US EPA 8321B:2007 LC-MS-MS Perfluorooctanoic Acid(PFOA) Refer to US EPA 3550C:2007 & US EPA 8321B:2007 LC-MS-MS Test Result(s) Please refer to the following page(s). Jan. 20, 2016 No. R169562068 Test Report Report No. Page 2 of 4 SCL01I004140008 Test Result(s) Tested Item(s) Lead (Pb) Result N.D. MDL 2 mg/kg Cadmium (Cd) N.D. 2 mg/kg Mercury (Hg) N.D. 2 mg/kg N.D. (Negative) 0.02 µg/cm2 Result N.D. MDL 0.5 µg/m² N.D. 0.5 µg/m² Hexavalent Chromium(Cr(VI)) Tested Item(s) Perfluorooctane Sulfonates(PFOS) Perfluorooctanoic Acid(PFOA) Tested Sample/Part Description Remark: Silvery plating The sample(s) had been dissolved totally tested for Lead, Cadmium, Mercury. -MDL = Method Detection Limit -N.D. = Not Detected (
Source Exif Data:File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : xwl Create Date : 2016:10:14 11:48:27+08:00 Modify Date : 2016:10:14 13:58:13+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 11.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2016:10:14 13:58:13+08:00 Format : application/pdf Title : R:\各部門參考圖紙\A安達康\IC USA\304238-000100 Model (1) Creator : xwl Document ID : uuid:e7b9fd04-f612-4320-9867-a10b652cb4a5 Instance ID : uuid:8e15ea79-fd0f-45cd-87ba-b4b9d823f77c Page Count : 39EXIF Metadata provided by EXIF.tools