CHEMMATE3936 361054

: Pdf 361054 361054 Forms

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

Material Safety Data Sheet
POLY-BRITE

Section 1. Chemical product and company identification
: POLY-BRITE
: Bottle wash additive
: Ecolab Food and Beverage
5105 Tomken Road
Mississauga ON L4W 2X5
1-800-352-5326
990283-01
:
: 25-January-2006
EMERGENCY HEALTH INFORMATION: 1-800-328-0026
Outside United States and Canada CALL 1-651-222-5352 (in USA)

Trade name
Product use
Supplier

Code
Date of issue

Section 2. Composition, information on ingredients
Name
polyphosphoric acids, sodium salts
triphosphoric acid, pentasodium salt
disodium metasilicate
sodium phosphate, tribasic

CAS number% by weight
68915-31-1
5- 10
7758-29-4
3-7
6834-92-0
3-7
7601-54-9
1-5

Section 3. Hazards identification
Physical state
Emergency overview

: Liquid. (Liquid.)
: DANGER!
CAUSES EYE AND SKIN BURNS.
CAUSES SEVERE RESPIRATORY TRACT IRRITATION.
HARMFUL IF SWALLOWED.
Do not ingest. Do not get in eyes, on skin or clothing. Avoid breathing vapour or
mist. Keep container closed. Use only with adequate ventilation. Wash thoroughly
after handling.
: Skin contact, Eye contact, Inhalation, Ingestion

Routes of entry
Potential acute health effects
Eyes
:
Skin
:
Inhalation
:
:
Ingestion

Corrosive to eyes.
Corrosive to the skin.

Severely irritating to the respiratory system.
Harmful if swallowed. Causes burns to mouth, throat and stomach.
See toxicological information (section 11)

Section 4. First-aid measures
Eye contact
Skin Contact
Inhalation
Ingestion

: In case of contact, immediately flush eyes with cool running water. Remove contact lenses and
continue flushing with plenty of water for at least 15 minutes. Get medical attention
immediately.
: In case of contact, immediately flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Wash clothing before reuse. Clean shoes
thoroughly before reuse. Get medical attention immediately.
: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical attention immediately.
: Rinse mouth; then drink one or two large glasses of water. Do not induce vomiting. Never give
anything by mouth to an unconscious person. Obtain medical attention immediately.

Page: 2/4

POLY-BRITE

Section 5. Fire-fighting measures
Auto-ignition temperature
Flash point
Flammable limits
Upper:
Lower:
Products of combustion
Fire-fighting media and
instructions

: Not available.
: > 100°C
Not available.
Not available.
: Not available.
: Use an extinguishing agent suitable for the surrounding fire.

Dyke liquid for later disposal.
No specific hazard.
Special protective equipment
: Fire-fighters should wear appropriate protective equipment and self-contained
breathing apparatus (SCBA) with a full face-piece operated in positive pressure
for fire-fighters
mode.
Risk of explosion of the product in the presence of mechanical impact: Not available.
Risk of explosion of the product in the presence of static discharge: Not available.

Section 6. Accidental release measures
Personal
Precautions
Environmental
precautions
Methods for
cleaning up

: Ventilate area of leak or spill. Do not touch damaged containers or spilled material unless
wearing appropriate protective equipment (Section 8). Stop leak if without risk. Do not allow to
enter drains or watercourses.
: Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains and sewers.
: If emergency personnel are unavailable, contain spilt material. For small spills, add absorbent
(soil may be used in the absence of other suitable materials), scoop up material and place in a
sealable, liquid-proof container for disposal. For large spills, dyke spilt material or otherwise
contain material to ensure runoff does not reach a waterway. Place spilt material in an
appropriate container for disposal.

Section 7. Handling and storage
Handling
Storage

: Do not ingest. Do not get in eyes, on skin or on clothing. Keep container closed. Use only with
adequate ventilation. Avoid breathing vapour or mist. Wash thoroughly after handling.
: Keep out of the reach of children. Keep container tightly closed. Keep container in a cool, wellventilated area.
Store between 40 and 0°C

Section 8. Exposure controls, personal protection
: Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of
vapours below their respective occupational exposure limits. Provide eyewash and safety
shower in area if contact or splash hazard exists.
Personal protection
Eyes
: Use chemical splash goggles. For continued or severe exposure wear a face shield over the
goggles.
Use
chemical-resistant, impervious gloves.
Hands
:
Skin
: Use synthetic apron, other protective equipment as necessary to prevent skin contact.
Respiratory
: Wear appropriate respirator when ventilation is inadequate and occupational exposure limits
are exceeded.
Consult local authorities for acceptable exposure limits.
Engineering
controls

Page: 3/4

POLY-BRITE

Section 9. Physical and chemical properties
Physical state
Colour
Odour
pH
Boiling/condensation point
Melting/freezing point
Specific gravity
Vapour pressure
Vapour density
Odour threshold
Evaporation rate
LogKow

:
:
:
:
:
:
:
:
:
:
:
:

Liquid. (Liquid.)
Clear.
Faint odour.
12.98 (100%)
Not available.
Not available.
1.18 (Water = 1)
Not applicable.
Not available.
Not available.
Not available.
Not available.

Section 10. Stability and reactivity
: The product is stable.
: Not available.
: Highly reactive with acids.
Slightly reactive to reactive with metals.
Incompatibility with various : Not available.
substances
Hazardous Decomposition : Not available.
Products
Stability
Conditions of instability
Reactivity

Section 11. Toxicological information
Potential acute health effects
: Corrosive to eyes.
Eyes
Skin
: Corrosive to the skin.
: Severely irritating to the respiratory system.
Inhalation
: Harmful if swallowed. Causes burns to mouth, throat and stomach.
Ingestion
Irritancy of Product
: Hazardous by WHMIS criteria.
Potential chronic health effects
: No known significant effects or critical hazards.
Carcinogenic effects
Mutagenic effects
: No known significant effects or critical hazards.
Teratogenic effects
: No known significant effects or critical hazards.
Reproductive effects
: No known significant effects or critical hazards.
Sensitization to Product
: No known significant effects or critical hazards.
Synergistic products
: Not available.
(toxicologically)
Toxicity data
Ingredient name
Test
Result
Route
Species
polyphosphoric acids, sodium
LD50
3053 mg/kg
Oral
Rat
salts
LD50
7572 mg/kg
Oral
Mouse
Rat
Oral
3120 mg/kg
triphosphoric acid, pentasodium LD50
Mouse
Oral
3100 mg/kg
salt
LD50
Rabbit
Dermal
>4640 mg/kg
LD50
1153 mg/kg
disodium metasilicate
LD50
Rat
Oral
770 mg/kg
LD50
Mouse
Oral
250 mg/kg
LDLo
Dog
Oral
250 mg/kg
LDLo
Oral
pig
: Not available.
Target organs

Page: 4/4

POLY-BRITE

Section 12. Ecological information
Products of degradation

: These products are phosphates. Some metallic oxides.

Section 13. Disposal considerations
Waste disposal

: The generation of waste should be avoided or minimised wherever possible. Avoid dispersal of
spilt material and runoff and contact with soil, waterways, drains and sewers. Disposal of this
product, solutions and any by-products should at all times comply with the requirements of
environmental protection and waste disposal legislation and any regional local authority
requirements.
Consult your local or regional authorities.

Section 14. Transport information
Regulatory
information

TDG
Classification

UN number Proper shipping name Class

Packing
group

Additional information

UN3253

III

Explosive Limit and Limited Quantity
Index
5

DISODIUM
TRIOXOSILICATE

8

Passenger Carrying Road or Rail
Index
25
APPLIES ONLY DURING ROAD TRANSPORT
Any variation of the shipping description based on the packaging is not addressed.

Section 15. Regulatory information
WHMIS
: Class E: Corrosive material.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the
MSDS contains all the information required by the Controlled Products Regulations.

Section 16. Other information
Date of issue
: 25-January-2006.
Responsible name
: Regulatory Affairs
Date of previous issue
: 25-January-2006.
Notice to reader
The above information is believed to be correct with respect to the formula used to manufacture the product
in the country of origin. As data, standards, and regulations change, and conditions of use and handling are
beyond our control, NO WARRANTY, EXPRESS OR IMPLIED, IS MADE AS TO THE COMPLETENESS OR
CONTINUING ACCURACY OF THIS INFORMATION.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2006:01:30 15:12:43-06:00
Modify Date                     : 2006:01:30 15:12:43-06:00
Page Count                      : 4
Creation Date                   : 2006:01:30 21:12:43Z
Mod Date                        : 2006:01:30 21:12:43Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : EHST ADMIN
Metadata Date                   : 2006:01:30 21:12:43Z
Creator                         : EHST ADMIN
Title                           : CHEMMATE3936.pdf

EXIF Metadata provided by EXIF.tools