431815 MSDS
431815-Msds 431815-MSDS 431815-MSDS 662820 Batch5 unilog cesco-content
2014-07-05
: Pdf 431815-Msds 431815-MSDS 754473 Batch5 unilog
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
27/6/2014 Brady Material B499 Technical Data Sheet Technical Data Sheet BRADY B-499 THERMAL TRANSFER / DOT MATRIX PRINTABLE NYLON CLOTH LABEL TDS No. B-499 Effective Date: 27-Jun-2012 Description: GENERAL Print Technology: Thermal transfer Material Type: Polyamide coated nylon cloth Finish: Matte white Adhesive: Permanent acrylic APPLICATIONS Wiremarking and general labeling applications B-499 is not recommended for outdoor use. RECOMMENDED RIBBONS Thermal Transfer Ribbons Brady Series R4300 Brady Series R4900 Brady Series R6000 Brady Series R6000 Halogen Free (previously known as R6000HF) Brady Series R6200 Brady Series R4500 colored (red, blue and green) Dot Matrix Ribbons Brady Series R2000 and Brady Series R5000 REGULATORY/AGENCY APPROVALS UL: B-499 is a UL Recognized Component to UL969 Labelling and Marking Standard when printed with Brady Series R4300, R4900, R6000, R6000 Halogen Free thermal transfer ribbons and R2000 and R5000 dot matrix ribbons. See UL file MH17154 for specific details. UL information can be accessed online at UL.com. Search in Certifications area. CSA: B-499 is CSA Accepted to C22.2 No.0.15-95 Adhesive Labels Standard when printed with Brady Series R4300 thermal transfer ribbon. See CSA file 041833 for specific details. CSA information can be accessed online at directories.csa-international.org. DIN VDE 0472 Part 815: Brady B-499 meets requirements of a halogen-free material per DIN VDE 0472 part 815. (Statement based on review of product construction and confirmation halogen content test run at an independent test laboratory.) Brady B-499 is RoHS compliant to 2005/618/EC MCV amendment to RoHS Directive 2002/95/EC. Details: PHYSICAL PROPERTIES Thickness Adhesion to: -Stainless Steel -Textured ABS TEST METHODS AVERAGE RESULTS ASTM D 1000 -Substrate -Adhesive -Total ASTM D 1000 20 minute dwell 24 hour dwell 45 oz/inch (50 N/100 mm) 80 oz/inch (88 N/100 mm) 20 minute dwell 24 hour dwell 35 oz/inch (39 N/100 mm) 40 oz/inch (44 N/100 mm) 0.0045 inch (0.115 mm) 0.0020 inch (0.051 mm) 0.0065 inch (0.166 mm) -Polypropylene 20 minute dwell 24 oz/inch (26 N/100 mm) 24 hour dwell 24 oz/inch (26 N/100 mm) Tack ASTM D 2979 Polyken™ Probe Tack 29 oz (900 grams) (1 second dwell, 1cm/sec separation) Drop Shear PSTC-7 (except use 1/2" x 1" sample) 9 hours Tensile Strength and Elongation ASTM D 1000 -Machine 80 lb/in (1400 N/100 mm), 50% Performance properties tested on B-499 printed with Series R4300, R4900, R6000, R6000 Halogen Free and R6200 thermal transfer ribbons and R2000 and R5000 dot matrix ribbons. Printed samples of B-499 were laminated to aluminum and allowed to dwell 24 hours before exposure to the indicated environmental conditions. Unless noted, results are the same for all ribbons tested. PERFORMANCE PROPERTIES Short Term High Service Temperature TEST METHOD 5 minutes at 293°F (145°C) Long Term High Service Temperature 30 days at 193°F (90°C) http://www.bradyid.com/bradyid/domino/contentView.do/B499.html TYPICAL RESULTS No visible effect to label at 145°C, slight shrinkage at 180°C but label still functional No visible effect to label at 90°C, slight discoloration 1/3 27/6/2014 Brady Material B499 Technical Data Sheet at 110°C but label still functional, at 120°C label is severely discolored Low Service Temperature Weatherability* No visible effect Material wrinkled and embrittled Humidity Resistance 30 days at -40°F (-40°C) ASTM G155, Cycle 1 30 days in Xenon Arc Weatherometer 30 days at 100°F, 95% R.H. UV Light Resistance 30 days in UV Sunlighter™ 100 No visible effect Abrasion Resistance Taber Abraser, CS-10 grinding wheels, 500 g/arm (Fed. Std. 191A, Method 5306) Print still legible at: 150 cycles with R4300, R4900, R6000, R6000 Halogen Free, R6200, R2000 and R5000 ribbons No visible effect *B-499 is not recommended for long-term outdoor use. PERFORMANCE PROPERTY CHEMICAL RESISTANCE Samples printed with Series R2000 and R5000 ribbons using the I.D.Pro® Plus Wire Marker Printer and IBM Typewriter. Samples wrapped around a 12 AWG, TFE jacketed wire and allowed to dwell 24 hours prior to test. Test was conducted at room temperature except where noted. Testing consisted of 5 cycles of 10 minute immersions in the specified test fluid followed by a 30 minute recovery period. After final immersion, samples rubbed 10 times with cotton swab saturated with test fluid. CHEMICAL REAGENT EFFECT TO LABEL STOCK SUBJECTIVE OBSERVATION OF VISUAL CHANGE R2000 R5000 DOT MATRIX RIBBON DOT MATRIX RIBBON No visible effect No visible effect Methyl Ethyl Ketone Complete unwrap 1,1,1-Trichloroethane Complete unwrap No visible effect No visible effect Isopropyl Alcohol Mineral Spirits Complete unwrap Complete unwrap No visible effect No visible effect No visible effect No visible effect SAE 20 WT Oil at 70°C No unwrap, label stained tan No visible effect No visible effect Mil 5606 Oil Slight unwrap, label stained red No visible effect No visible effect Gasoline Rust Veto® 342 Adhesive failure, label discoloration Moderate unwrap, label discoloration No visible effect No visible effect No visible effect No visible effect Deionized Water No visible effect No visible effect No visible effect 3% Alconox® Detergent No visible effect No visible effect w/o rub, moderate print removal after rub No visible effect w/o rub, moderate print removal after rub 10% Sodium Hydroxide Solution Complete unwrap No visible effect No visible effect 10% Sulfuric Acid Solution No visible effect No visible effect No visible effect Northwoods™ Buzz Saw Degreaser Complete unwrap No visible effect w/o rub, slight print removal after rub No visible effect w/o rub, slight print removal after rub Speedi Kut Cutting Oil 332 No unwrap, label stained red No visible effect No visible effect 5% Salt Solution No visible effect No visible effect No visible effect Samples printed with Series R4300, R4900, R6000, R6000 Halogen Free and R6200 thermal transfer ribbons. Samples laminated to aluminum panels and allowed to dwell 24 hours prior to test. Test performed at room temperature except where noted. Testing consisted of 5 cycles of 10 minute immersions in the specified test fluid followed by a 30 minute recovery period. After final immersion, samples rubbed 10 times with cotton swab saturated with test fluid. CHEMICAL REAGENT Methyl Ethyl Ketone 1,1,1-Trichloroethane Isopropyl Alcohol Mineral Spirits SAE 20 WT Oil at 70°C Mil 5606 Oil Gasoline Rust Veto® 342 Deionized Water SUBJECTIVE OBSERVATION OF VISUAL CHANGE R4300 R4900 R6000 R6000 Halogen Free R6200 THERMAL TRANSFER THERMAL TRANSFER THERMAL TRANSFER THERMAL TRANSFER THERMAL TRANSFER RIBBON RIBBON RIBBON RIBBON RIBBON No visible effect w/o rub, No visible effect w/o rub, No visible effect, No visible effect w/o rub, No visible effect w/o rub, slight print removal after slight print removal after moderate print smear moderate print smear slight print smear after rub rub rub after rub after rub No visible effect No visible effect No visible effect Obsolete No visible effect No visible effect w/o rub, No visible effect w/o rub, No visible effect w/o rub, No visible effect w/o rub, No visible effect w/o rub, moderate print removal complete print removal slight print removal after slight print removal after moderate print removal after rub after rub rub rub after rub No visible effect w/o rub, No visible effect No visible effect No visible effect No visible effect slight print removal after rub No visible effect w/o rub, No visible effect No visible effect No visible effect No visible effect severe print removal after rub No visible effect w/o rub, No visible effect No visible effect No visible effect No visible effect slight print removal after rub No visible effect No visible effect No visible effect No visible effect No visible effect w/o rub, slight print smear after rub No visible effect w/o rub, No visible effect w/o rub, No visible effect No visible effect No visible effect severe print removal after moderate print removal rub after rub No visible effect w/o rub, No visible effect w/o rub, No visible effect No visible effect No visible effect w/o rub, moderate print smear severe print removal after slight print removal after after rub rub rub http://www.bradyid.com/bradyid/domino/contentView.do/B499.html 2/3 27/6/2014 Brady Material B499 Technical Data Sheet 3% Alconox® Detergent No visible effect w/o rub, No visible effect w/o rub, No visible effect w/o rub, No visible effect w/o rub, slight print removal after severe print removal after slight print removal after slight print removal after rub rub rub rub 10% Sodium Hydroxide No visible effect No visible effect No visible effect w/o rub, No visible effect w/o rub, Solution slight print smear after rub slight print smear after rub 10% Sulfuric Acid Solution No visible effect w/o rub, No visible effect w/o rub, No visible effect w/o rub, No visible effect w/o rub, moderate smear after rub moderate print removal sight print removal after slight print removal after after rub rub rub Northwoods™ Buzz Saw No visible effect w/o rub, No visible effect w/o rub, No visible effect w/o No visible effect w/o rub, Degreaser moderate print removal print illegible after rub rub, moderate print moderate print removal after rub removal after rub after rub Speedi Kut Cutting Oil No visible effect No visible effect No visible effect No visible effect 332 5% Salt Solution No visible effect No visible effect No visible effect No visible effect No visible effect w/o rub, slight print removal after rub No visible effect No visible effect w/o rub, slight print removal after rub No visible effect w/o rub, slight print removal after rub No visible effect No visible effect w/o rub, slight print removal after rub Product testing, customer feedback, and history of similar products, support a customer performance expectation of at least two years from the date of receiptfor this product as long as this product is stored in its original packaging in an environment b elow 80 degrees F (27°C) and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications. Trademarks: Alconox® is a registered trademark of Alconox Co. BradyPrinter™ is a trademark of Brady Worldwide, Inc. I.D. Pro® is a registered trademark of Brady Worldwide, Inc. Northwoods™ is a trademark of the Superior Chemical Corporation. Polyken™ is a trademark of Testing Machines Inc. Rust Veto® is a registered trademark of the E.F. Houghton & Co. Sunlighter™ is a trademark of the Test Lab Apparatus Company ASTM: American Society for Testing and Materials (U.S.A.) SAE: Society of Automotive Engineers (U.S.A.) UL: Underwriters Laboratories Inc. (U.S.A.) All S.I. Units (metric) are mathematically derived from the U.S. Conventional Units. Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information. Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information. WARRANTY Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products. Copyright 2013 Brady Worldwide, Inc. | All Rights Reserved Material may not be reproduced or distributed in any form without written permission. Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289 http://www.bradyid.com/bradyid/domino/contentView.do/B499.html 3/3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 3EXIF Metadata provided by EXIF.tools