Fluke Corporation FLK 075 CLKT C Range IR Window 3 (75mm) Manual Installation Directions

2014-07-05

: Pdf 443467-Installationsheet 443467-InstallationSheet 095969 Batch5 unilog

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadFluke Corporation FLK-075-CLKT C-Range IR Window 3 (75mm) Manual Installation Directions
Open PDF In BrowserView PDF
How to Contact Fluke

CLKT, CLKTO, CLV

Infrared Window
Installation Guide

Introduction

The Infrared Window is a precision made accessory
which, when accurately installed, will give years of trouble
free service. Read and understand these instructions
thoroughly before attempting to install the units.
All of the items in Table 1 are available from Fluke.
Table 1.
Model

Application

Type

Size

CLKT

Outdoor

3, 12

2″, 3″, 4″

CLKTO, CLV

Indoor

1

3″

PN 3783652
June 2010 Rev.1, 3/11
© 2010-11 Fluke Corporation. Product specifications are subject to
change without notice. All rights reserved. Printed in UK.

To contact Fluke, call one of the following telephone
numbers:
●● Technical Support USA: 1-800-44-FLUKE
(1-800-443-5853)
●● Calibration/Repair USA: 1-888-99-FLUKE
(1-888-993-5853)
●● Canada: 1-800-36-FLUKE (1-800-363-5853)
●● Europe: +31 402-675-200
●● Japan: +81-3-3434-0181
●● Singapore: +65-738-5655
●● Anywhere in the world: +1-425-446-5500
Or, visit Fluke’s website at http://www.fluke.com/
irwindows.
To view, print, or download the latest manual supplement,
visit http://us.fluke.com/usen/support/manuals.

Safety Information
 Warning
To prevent damage or injury:
●● Follow these instructions.
●● Comply with local and national safety
requirements when working in hazardous
locations.
●● Wear appropriate eye and ear protection.

Shop for Fluke products online at:

www.

MyFlukeStore.com

1.877.766.5412

Before You Start
The installation may be carried out by using either an
electro-hydraulic hole punch (Figure 1, Item 1) or a
circular hole saw (Figure 2, Item 1).
2

1
1

1

2

Tools required:
1.	 Electro-hydraulic punch (Figure 1) or hole saw
(Figure 2)
2.	 Drilling machine
3.	 Conedrill
4.	 Pozidrive screwdriver
5.	 Center punch
6.	 6 mm (1/4″) high-speed twist drill
7.	 Tapping drill:
	 for 50 mm (2″) units use 2.78 mm (7/64″)
	 for 75 mm (3″) units use 3.57 mm (9/64″)
	 for 100 mm (4″) units use 3.57 mm (9/64″)
8.	 Digital vernier calipers.

2

6.	 Installation instructions (1)
7.	 Mounting frame (1)

3
CLKT

INFRARED
WINDOW

5

6

7

8

9

Step 2: Fit the Drilling Template onto a Flat Surface
Having decided on the correct position for the unit, select
the drilling template. Peel off the back and stick to the
panel with the wording horizontal (Figure 4).

TYPE: 3, 12
INDOOR / OUTDOOR USE
FLK- 075 -CLKT

Step 3: Center Punch
Using the center punch, punch the fixing holes and
center hole as marked (Figure 5).

CLKT, CLKTO, CLV
Infrared Window

Installation Guide

The Infrared Window is a precision made accessory
which, when accurately installed, will give years of trouble
free service. Read and understand these instructions
thoroughly before attempting to install the units.
All of the items in Table 1 are available from Fluke.
Table 1.

TAG NO.

4

Model

Application

Voltage Level

Type

Size

CLKT

Outdoor

All

3, 12

2″, 3″, 4″

CLKTO

Indoor

Medium

1

PN 3783652
June 2010
change without notice. All rights reserved. Printed in UK.

3″

IMPORTANT

CHECK BEHIND BEFORE DRILLING

Getting Started
Step 1: Unpack and Check
When your Infrared Window arrives, carefully unpack the
unit.
Remove the two front security screws and lay out
the components. Check that you have all of the parts
(Figure 3).
1.	 Security screws (2)
2.	 Security cover (1)
3.	 2-hole gasket (1)
4.	 Fixing screws (various)
5.	 Drilling template (1)

Step 4: Drill Center Hole
Using the 6 mm (1/4″) twist drill, drill out the center hole
(B) (Figure 6).
●● For 50 mm (2″) unit, proceed to step 5.
●● For 75 mm (3″) and 100 mm (4″) units, proceed to step 6.
Step 5: Drill Fixing Holes
Using the 2.78 mm (7/64″) twist drill, drill out the fixing
holes (Figure 7).
●● If using hole saws, proceed to step 7(A).
●● If using the hole punch, proceed to step 8(A).
Step 6: Drill Fixing Holes
Using the 3.57 mm (9/64″) twist drill, drill out the fixing
holes (Figure 8).
●● If using hole saws, proceed to step 7(A).
●● If using the hole punch, proceed to step 8(A).

Shop for Fluke products online at:

www.

MyFlukeStore.com

1.877.766.5412

10

11

16

Step 7(B): Enlarging the Center Hole (Hole Saw)
Using the 6 mm (1/4″) hole as a pilot hole, enlarge the
center hole using the selected hole saw (Figure 9). Deburr all of the holes and treat as required. Proceed to
step 9.

17
CLKT

ED
INFRARW
WINDO

: 3, 12
TYPE OOR USE
/ OUTD
-CLKT
INDOOR
FLK- 075

Step 8(A): Enlarging the Center Hole (Hole Punch)
Refer to the hole punch manual and follow all safety
procedures.
12

13

18

From Table 3, select the correct drawbar/punch/die/kwik
stepper combination.
CLKT

Using the Kwik Stepper, enlarge the 6mm center hole
(Figure 10) to the size shown in Table 3. Proceed to step
8(B).

ED
INFRARW
WINDO

: 3, 12
TYPE OOR USE
/ OUTD
-CLKT
INDOOR
FLK- 075

Table 3.

14

15

Size

K/Step

Greenlee
Punch/Die/PN

50 mm (2″)

43.2 mm/1.7″

20 mm/0.8″

06974/04013

75 mm (3″)

69.9 mm/2.75″

20 mm/0.8″

04247/04246

100 mm (4″)

92 mm/3.62″

20 mm/0.8″

Hole Saw Only

Infrared
Window Size

Step 7(A): Enlarging the Center Hole (Hole Saw)
From Table 2, select the correct size of hole saw. Proceed
to step 7(B).
Table 2.
Infrared Window Size

Hole Saw Size

50 mm (2″)

43 mm (1‑3/4″)

75 mm (3″)

68 mm (2‑5/8″)

100 mm (4″)

93 mm (3‑5/8″)

Shop for Fluke products online at:

www.

MyFlukeStore.com

1.877.766.5412

Step 8(B): Enlarging the Center Hole (Hole Punch)
Referring to Table 3, and following the instructions in the
hole punch manual, punch out the center hole (Figure 11).

Step 9: De-Burr the Holes, Remove any Shavings and
the Self Adhesive Template
Degrease the front panel.
Step 10: Fix Infrared Window
Peel off the protective cover from the rear panel gasket on
the Infrared Window’s mounting frame (Figure 12).

Gasket Compression Table
Tighten taptite screws until gasket compresses as listed
in Table 4.
Note
Take all measurements with digital vernier calipers.
Table 4.

Align the fixing holes and firmly press the Infrared Window
into place (Figure 13).
Using the correct sized screwdriver and the countersunk
screws provided, fix back the Infrared Window
(Figure 14).
Gradually advance each fixing until the gasket is seen to
compress evenly. Refer to Table 4.
Step 11 - Fitting Security Cover
Peel off the cover from the 2‑hole gasket (Figure 15).
Align the gasket with the two fixing holes positioned
vertically and press the gasket into position (Figure 16).
Fit the security cover using the two security screws
provided (Figure 17).
The Infrared Window is ready to use. Remember to
remove the cover before imaging (Figure 18).

2″ Compression Table
Standard Gasket

Premier Gasket

U/C

C

U/C

C

16.8 mm

16.3 mm

16.3 mm

15.0 mm

0.663″

0.643″

0.643″

0.591″

3″ Compression Table
16.8 mm

16.3 mm

16.3 mm

15.0 mm

0.663″

0.643″

0.643″

0.591″

4″ Compression Table
20.4 mm

19.9 mm

N/A

N/A

0.805″

0.784″

N/A

N/A

U/C = 	 Overall dimension - Exterior of security
cover to front face of the panel with gasket
uncompressed.
C 	 =	 Overall dimension - Exterior of security cover to
front face of the panel with gasket compressed.

Shop for Fluke products online at:

www.

MyFlukeStore.com

1.877.766.5412
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : http://www.myflukestore.com/product/fluke_flk_075_clkt_c_range_ir_window_3_75mm
Creator                         : Adobe InDesign CS4 (6.0)
Modify Date                     : 2011:02:25 09:03:20-08:00
Keywords                        : fluke corporation, flk-075-clkt, infrared window, manual
Title                           : Fluke Corporation Fluke FLK-075-CLKT C-Range IR Window 3" (75mm) Manual
Subject                         : Fluke Corporation Fluke FLK-075-CLKT C-Range IR Window 3" (75mm) Manual
Create Date                     : 2011:02:25 09:03:13-08:00
Page Count                      : 4
XMP Toolkit                     : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18
Instance ID                     : uuid:6bff7e05-3298-4783-8945-e7ce91d66950
Document ID                     : adobe:docid:indd:5e37e09c-6ffb-11de-be94-e276d2f52162
Original Document ID            : adobe:docid:indd:5e37e09c-6ffb-11de-be94-e276d2f52162
Rendition Class                 : proof:pdf
Derived From Instance ID        : f03e4075-2454-11de-bc63-fb88fd086e56
Derived From Document ID        : adobe:docid:indd:2114116e-f5fd-11dc-8484-b090b3759c6f
History Action                  : saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:5C6245A25338E011A71F98E17949B73E, xmp.iid:5D6245A25338E011A71F98E17949B73E, xmp.iid:5E6245A25338E011A71F98E17949B73E, xmp.iid:656245A25338E011A71F98E17949B73E, xmp.iid:479D7C815C38E011A71F98E17949B73E, xmp.iid:EF6B7819AC3AE0119933955C705B6D68, xmp.iid:F06B7819AC3AE0119933955C705B6D68
History When                    : 2011:02:14 08:01:07-08:00, 2011:02:14 08:01:07-08:00, 2011:02:14 08:21:04-08:00, 2011:02:14 09:02:19-08:00, 2011:02:14 09:04:38-08:00, 2011:02:17 07:39:25-08:00, 2011:02:17 07:43:09-08:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:BFE295E06949DF119173AFCB4F1056E6, uuid:C0E295E06949DF119173AFCB4F1056E6, uuid:1B26F1FD8258DF118CC9CCDAF10B5BFA, uuid:AC5EA1531F44DF11A967A50E749340F4, uuid:AD5EA1531F44DF11A967A50E749340F4, uuid:AE5EA1531F44DF11A967A50E749340F4, uuid:25E347732144DF11A967A50E749340F4, uuid:27E347732144DF11A967A50E749340F4, uuid:26E347732144DF11A967A50E749340F4, xmp.iid:B1460FAA716EDF11956DF810F126C4C6, uuid:28E347732144DF11A967A50E749340F4, uuid:29E347732144DF11A967A50E749340F4, uuid:2AE347732144DF11A967A50E749340F4, uuid:2CE347732144DF11A967A50E749340F4, uuid:2DE347732144DF11A967A50E749340F4, uuid:BDE295E06949DF119173AFCB4F1056E6, uuid:7D791ED04B46DF11A14AE22BD150B6AA, uuid:1F7B55662544DF11A967A50E749340F4, uuid:207B55662544DF11A967A50E749340F4
Manifest Reference Document ID  : uuid:7CAC2D562B43DF11AEC0857D98B8E649, uuid:7AAC2D562B43DF11AEC0857D98B8E649, uuid:1A26F1FD8258DF118CC9CCDAF10B5BFA, uuid:5E25D9ED6341DF11B4B88BB0FB9C9F4A, uuid:852F24A53841DF11B4B88BB0FB9C9F4A, uuid:ED200B192E43DF11AEC0857D98B8E649, uuid:0ABFFB115B43DF119D0182EB5674B5EA, uuid:0DBFFB115B43DF119D0182EB5674B5EA, uuid:C72638A25E43DF119D0182EB5674B5EA, xmp.did:B1460FAA716EDF11956DF810F126C4C6, uuid:872F24A53841DF11B4B88BB0FB9C9F4A, uuid:90D929806343DF119D0182EB5674B5EA, uuid:CE36F02DF73BDF11BCB0C1609EA4237A, uuid:C936F02DF73BDF11BCB0C1609EA4237A, uuid:FADE65D6E943DF11A967A50E749340F4, uuid:CA0DC73F8D3CDF11BCB0C1609EA4237A, uuid:D00DC73F8D3CDF11BCB0C1609EA4237A, uuid:A06811952042DF11A619A09C0C787DCE, uuid:A66811952042DF11A619A09C0C787DCE
Metadata Date                   : 2011:02:25 09:03:20-08:00
Creator Tool                    : Adobe InDesign CS4 (6.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 7310 bytes, use -b option to extract)
Doc Change Count                : 118
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
EXIF Metadata provided by EXIF.tools

Navigation menu