Product Detail Manual
2014-07-05
: Pdf 479082-Attachment 479082-Attachment 783250 Batch5 unilog
Open the PDF directly: View PDF .
Page Count: 4
Download | |
Open PDF In Browser | View PDF |
VDV PRO & IENet™ PRO Cable Testers n VDV PRO is perfect for Voice, Data and Video applications n VDV PRO supports RJ-11/12, RJ-45, Coax F, BNC and RCA connectors n IENet™ PRO supports RJ-45 and M12 connections n Both models measure cable length n IENet™ PRO is designed specifically to test Industrial Ethernet cabling n Wide, bright backlit screen n Easy-to-read Pass/Fail results n Displays wire errors including: Open, Short, Miswire and Split Pair and Length n Multi-tone support for cable tracing and fault isolation n Blink network link LED for visual cable tracing n NEW Integrated coax - F-connection n NEW IENet™ PRO tests to Profinet® Industrial Ethernet cabling requirements VDV PRO Cable Tester Designed to Support a Full Range of Voice, Data and Video (VDV) Applications The VDV PRO Cable Tester is an easy-to-use cable testing and verification device that can quickly test all wiring requirements found throughout today’s residential and commercial environments. n Voice – tests 3-pair USOC and 6-position RJ-11/12 jacks for voice cable testing n Data – tests wire map of shielded and unshielded cable to T568A/B standard n Video – tests coax cable for opens, shorts and length with F-Connector interface VDV PRO Tester n Larger backlit LCD screen for better test results readability n Displays PASS and sounds beep (selectable) for T568A/B n Selectable backlight n Will display wire map for 10Base-T and Token Ring with remote connected n Network link LED blink for visual cable tracing n UTP, STP, and Coax length measurement in feet or meters using cable capacitance method n Coax mapping with up to eight color coded coax remotes. n Voice testing capability detects RJ-11 (1, 2, or 3 pair) n Voice test also shows Normal or Reverse for pins 1 through 6 n Length measurement is shown during initial test results for convenience and time savings n Eight remotes have RJ-45, RJ-11 and Coax F-jacks for increased testing capabilities n Tests for shield continuity, shorts, opens, miswires, reversals and split pairs with remote connected n Full dot-matrix LCD display for user convenience to read display results n Tone generator mode sends four different tones on all conductors, selected pair or selected pin n Auto-off in any mode and low power consumption for long battery life n Low battery symbol indicates when to change battery n 9V battery included and easy to change in the future as needed n Identifies presence of voltage on cables n One-ended testing for shorts, opens and split pairs (no remote needed) n Test results displayed in wire map format with message line for shorts and split pairs Integrated RJ-11/12 (phone) RJ-45 (UTP/STP) and Coax (F-Connector) interfaces on top of the unit Compact ergonomic design puts full-featured VDV functionality in the palm of your hand. Remote ID number on display. UTP indicated as “No Shield” and STP as “Shield.” Large backlit LCD displays current test mode, test results and all faults for the various cable types. Simple four button operation Display automatically warns of voltage on lines and shows a “PASS” or “Miswire” message after each test. Dockable remote with RJ-11/12, RJ-45, and Coax (F-Connector) interfaces. Description Cat. No. VDV PRO w/one remote and terminator 33-770 Remote #1 stores securely in the base of the main unit for ready availablity and easy patch cable testing VDV PRO w/eight remotes and terminators 33-771 VDV PRO Eight Remote Kit (ID 1-8) 33-774 Eight Coax Terminator Kit 33-775 VDV Pro w/one remote and probe 33-780 IENet™ PRO Cable Tester IENet™ PRO - the choice for Industrial Ethernet cable testing The tester features a unique easy-to-use cable test for 2 pair and 4 pair Industrial Ethernet cabling. With shielded 2 pair, M12 and RJ-45 ports, the IENet™ PRO is compatible with most Industrial Ethernet cabling. Test results are displayed in the PROFINET® Industrial Ethernet required format. Instantly Verify Wiring Integrity The IENet™ PRO tester makes it a snap to quickly verify wiring integrity and assure proper terminations for diverse types of industrial cabling. n Simple selection between Voice, 2 and 4 pair Data, and Coax testing functions (Voice and Video/Security tests via optional adapters) n Tests for opens, shorts, miswires, reversals, split pair (user selectable) and length n Indicates correct wiremap to T568A/B standards for shielded and unshielded cabling n Easy-to-read LCD display with “PASS” or “Miswire” indicator for each test n Identifies presence of voltages on cables Description Cat. No. IENet™ PRO w/single remote 33-772 n Integrated remote unit to make storage and carrying easier IENet™ Pro w/eight remotes 33-773 n Can support additional optional remotes making it efficient for one Eight Coax Terminator Kit 33-775 IENet™ Pro Eight Remote Kit (ID 1-8) 33-776 RJ-45 to RJ-11 jack adapter (2/card) LA-4233 comply with industrial ethernet PROFINET® requirements RJ-45 to F-Connector adapter (2/card) LA-4234 PROFINET® is a registered trademark of PROFIBUS InternationaL. F to BNC Adapter Kit LA-4173 n Tone generator supports four different tones making fault isolation easier person testing n Network LED blink for visual cable tracing n Numerical indication for UTP “No Shield” and STP - “Shield” to Integrated RJ-45 (UTP/STP) and shielded M12 interfaces on top of the unit Compact ergonomic design puts fullfeatured Industrial Ethernet cable testing in the palm of your hand. Large backlit LCD displays user current test mode, test results and all faults for the various cable types. Display automatically warns of voltage on lines and shows a Pass or Miswire message after each test. Remote ID number indicated on display, UTP indicated as “No Shield” and STP as “Shield” A single button push immediately selects between VOICE, 2 and 4 pair DATA or VIDEO testing functions. Detachable remote with RJ-45 and shielded M12 Coax interfaces. Testers SecuriTEST™ PRO CCTV/Security Tester VDV Multimedia Cable Tester Easy-to-use tester for installers working with voice, data and video applications. One tester for all applications! n V oice – supports 3-pair USOC and 6-position RJ-11/12 jacks for telephone cable testing n D ata – supports both shielded and unshielded cable testing to T568A/B (RJ-45) n V ideo – tests coax cable for opens and shorts with F-connector interface n T ests for opens, shorts, miswires, reversals and split pairs. Plus tone and voltage detection. S even Essential CCTV Tools combine a CCTV video tester, PTZ camera controller, digital multimeter, UTP cable tester, video test pattern generator, PTZ protocol analyzer and camera programmer in a single compact package. n P eak to Peak voltage (IRE) and audio level n S ave Time & Money – Test, aim, focus and program cameras when working alone. Save time by not having to walk back to the control center to verify functionality of each camera. n Description Cat. No. VDV Multimedia Cable Tester 33-856 n SIGNALTEK™-FO Multimedia Qualification Tester SIGNALTEK™-FO is the first qualification tester that offers both copper and fiber optic testing. F iber Optic and Copper Gigabit Qualification to IEEE 802.3 standards n E asy reporting and no software required n M ultimode and Single Mode capability – Qualify short and long range fiber cabling up to 10km n n n P TZ Protocol Analyzer – Compatible with 20+ PTZ protocols to test and program cameras in the field. Decodes and identifies output from PTZ console to aid in troubleshooting. Description Cat. No. SecuriTEST™ PRO CCTV/Security Tester and Case 33-892 LanTEK® II Series Cable Certifier n n B ERT and Optical Attenuation Measurements— Perform Bit Error Rate Testing and decibel (dB) loss measurements of optical links n n A ctive Port Interface – DHCP, PING and ARP functions to verify set speed and connected devices Description Cat. No. SIGNALTEK™-FO w/850 Modules 33-981 SINGALTEK™-FO w/13X0 Modules 33-982 SIGNALTEK™-FO w/850 & 13X0 Modules 33-983 SIGNALTEK™-FO w/o Modules (Fiber-Ready) 33-987 SIGNALTEK™ Kit (Copper Only) 33-974 OTDR Models ranging from 350 MHz to 1000 MHz for Category 6/ISO E through Category 7A/ISO FA certification High speed testing saves time and money Stores over 1700 Category 6/ISO E tests with graphs Eliminates expensive permanent link adapters and test with patch cords for most installation n Extraordinary fast fiber testing with FiberTEK® FDX - the first dual wavelength, bidirectional fiber certification tool n Large, ultra-bright display - 4.3” wide screen display with white LED backlighting provides easy viewing of high-frequency data plots n 350 MHz & 500 MHz models are fully upgradable to 1000 MHz n Smart lithium-ion battery technology - 18 hour battery life Description Cat. No. LanTEK II-350: TIA/EIA Cat6, ISO Class E certifier w/Cat6 adapters 33-991 n Short Attenuation and Event Dead Zones – for accurate location and characterization of events n Autotest Function – provides simple one-button operation n Fast Data Acquisition – important for troubleshooting intermittent problems n Interchangeable Fiber Adapters – easy on-site replacement n USB port – convenient data transfer to PC LanTEK® II-500: TIA/EIA Cat6A, ISO Class EA certifier w/Cat6A adapters 33-992 LanTEK® II-1000: TIA/EIA Cat7A, ISO Class F/FA certifier w/Cat6A adapters 33-993 Multimode (850/1300nm) kit with LED light sources for standard multi-mode fiber, 850nm LED, 1300nm LED 33-990-FA01 Multimode (850/1300nm) kit with VCSEL/laser light sources for laser optimized fiber, 850nm VCSEL, 1300nm FP laser 33-990-FA02 Single mode (1310/1550nm) kit with laser light sources for single mode fiber, 1310nm FP laser, 1550nm FP laser 33-990-FA03 n Certifying OTDR Option – for tier-2 certification Combination MM/SM kit with LED MM sources and laser SM sources (33-990-FA01 & 33-990-FA03) 33-990-FA04 Combination MM/SM kit with VCSEL/laser MM sources and laser SM sources (33-990-FA02 & 33-990-FA03) 33-990-FA05 ® n Includes Macro Bend detection – accurately detects macro bends in singlemode fiber n Fiber Inspection Probe ready – includes port for video inspection probes Description Cat. No. MM OTDR Kit with Macro Bend Detection 33-960-10MB Quad OTDR Kit with Macro Bend Detection 33-960-30MB IDEAL INDUSTRIES, INC. Becker Place, Sycamore, IL 60178, USA / 815-895-5181 • 800-435-0705 in USA International offices: Australia • Brazil • Canada • China • Germany • Mexico • UK For complete sales office contact information, visit us at: www.idealindustries.com Form No. P-5002 ©2009 IDEAL INDUSTRIES, INC. 1/10 Printed in U.S.A.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Creator : Adobe InDesign CS3 (5.0.4) Modify Date : 2012:06:19 22:51:00+08:00 Create Date : 2010:01:14 10:33:35-06:00 Page Count : 4 XMP Toolkit : XMP Core 4.1.1 Instance ID : uuid:bfac341c-012a-11df-813a-001451111306 Document ID : adobe:docid:indd:0addb44c-d50c-11de-995d-a48c2e628231 Rendition Class : proof:pdf Derived From Instance ID : 0addb44b-d50c-11de-995d-a48c2e628231 Derived From Document ID : adobe:docid:indd:ed3fa078-a2a2-11de-8dde-ba80171546c0 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 240.00, 240.00, 72.00, 240.00, 240.00, 240.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 240.00, 240.00, 72.00, 240.00, 240.00, 240.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:B97979C99CD611DBBE64C23A44F73EC6, uuid:C0E47F4BA9F1DC11B370A6A2B8480F69, uuid:E5928E3EA53011DEB1BBE678582686D5, uuid:89A5D1F2572011DEA83184531900B7EE, uuid:aaf3122a-7f19-11d8-8a5f-f59774701c39, uuid:870415C5CAC611DEA79E8C17DE87AE49, uuid:a23bb4bf-a100-11d9-8b69-e7ef189ccdfa, uuid:304E2BD8CAAB11DEA79E8C17DE87AE49, uuid:E5A0662CCAAB11DEA79E8C17DE87AE49, uuid:116A2656EBC411DEAA74A9EF99F1AA75, uuid:E5A0662FCAAB11DEA79E8C17DE87AE49, uuid:304E2BD8CAAB11DEA79E8C17DE87AE49, uuid:304E2BD2CAAB11DEA79E8C17DE87AE49 Manifest Reference Document ID : uuid:B97979C89CD611DBBE64C23A44F73EC6, uuid:BFE47F4BA9F1DC11B370A6A2B8480F69, uuid:0EE05B52A50B11DEB1BBE678582686D5, uuid:AA318FD4792FDE11B22D96D565CBE4A7, adobe:docid:photoshop:5cbca2ef-79c2-11d8-b89a-99fdba524813, uuid:870415C4CAC611DEA79E8C17DE87AE49, adobe:docid:photoshop:a23bb4be-a100-11d9-8b69-e7ef189ccdfa, adobe:docid:photoshop:a7b37a3c-c89f-11de-bc3f-f92471bd80c8, adobe:docid:photoshop:9d754c9f-c8a2-11de-bc3f-f92471bd80c8, uuid:116A2655EBC411DEAA74A9EF99F1AA75, adobe:docid:photoshop:c6f158c8-c8bb-11de-bc3f-f92471bd80c8, adobe:docid:photoshop:a7b37a3c-c89f-11de-bc3f-f92471bd80c8, adobe:docid:photoshop:c6f158c8-c8bb-11de-bc3f-f92471bd80c8 Metadata Date : 2010:01:14 10:34:55-06:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 15592 bytes, use -b option to extract) Format : application/pdf Trapped : False Producer : PDF-XChange Viewer [Version: 2.0 (Build 42.7) (Oct 27 2009; 19:39:53)]EXIF Metadata provided by EXIF.tools