Spec Sheet PVL

: Pdf 483160-Attachment 483160-Attachment 785988 Batch4 unilog

Open the PDF directly: View PDF .
Page Count: 2

Catalog Number Wattage Lamp Type Voltage/Ballast Weight

lbs. kg

HIGH PRESSURE SODIUM

PVL-070S-128 70 None Quad/AL (HPF) 17 7.7

PVL-070S-128LP 70 Clear Mogul Quad/AL (HPF) 17 7.7

PVL-070S-521L 70 Clear Mogul 120/Reactor (NPF) 12 5.4

PVL-100S-128 100 None Quad/AL (HPF) 18 8.2

PVL-100S-128LP 100 Clear Mogul Quad/AL (HPF) 18 8.2

PVL-100S-521L 100 Clear Mogul 120/Reactor (NPF) 12 5.4

PVL-150S-1282150 None Quad/AL (HPF) 18 8.2

PVL-150S-128LP2150 Clear Mogul Quad/AL (HPF) 18 8.2

PVL-150S-521L 150 Clear Mogul 120/Reactor (NPF) 12 5.4

METAL HALIDE

PVL-070H-128L 70 Clear Mogul Quad/AL (HPF) 23 10.4

PVL-100H-128L 100 Clear Mogul Quad/PLA (HPF) 23 10.4

PVL-175H-1281,2 175 None Quad/PLA (HPF) 24 10.9

PVL-175H-128LP1,2 175 Clear Mogul Quad/PLA (HPF) 24 10.9

PULSE START METAL HALIDE

PVL-150P-128-LP 150 Clear Mogul Quad/Pulse Start (HPF) 18 8.2

1 Mercury vapor lamps may be used if desired.

2 Now available in 480V, change

8

to

5

.

NOTE: For Tri-Tap

®

(120/277/347V) change

8

to

6

(for Quad-Tap

®

ballasts, 208 & 240V not CSA).

NOTE: 50 Hz 220/240V available on 70 watt HPS, 150 watt HPS and 175 watt MH.

APPLICATIONS

• Ideally suited for security lighting applications as well as commercial

and architectural exterior wall and area lighting for parking lots, office

buildings, stores, shopping centers, fast food restaurants, banks, ware-

houses, and parking garages.

SPECIFICATIONS

• One-piece polycarbonate front with high performance prismatic

optics. Secures to housing gasket with twin Hubbell Gard®captive fasten-

ers.

• Die cast aluminum housing allows firm mounting over recessed junc-

tion boxes or on flat surfaces for 1/2" surface conduit. Casting dissi-

pates ballast heat for long life. Side hub supplied for field installation of

button photocontrol, ordered separately.

• Specular aluminum reflector with kicker panels drive maximum lamp

lumens to the refractor prisms. Vertical mogul base lamp with these

optics provide six-to-one spacing-to-mounting height ratio for maximum

spacing or better uniformity. Vertical lamp increases both lamp life and

output.

• Available in 70-150 watt HPS and 70-175 watt metal halide. Various

combinations of 120V NPF (HPS only) and QuadTap®, HPF ballasts. 347

volt for Canada and 50 Hz 220/240 volt available. Many listings include

lamp for stocking convenience.

• Dark bronze powder paint finish standard on housing, front is painted inside

the polycarbonate.

LISTINGS

• CSA certified to UL 1598 for use in wet locations.

PERIMALITER®

WALLPACK

PVL POLYCARBONATE SERIES

ORDERING INFORMATION

HUBBELL OUTDOOR LIGHTING SHEET # PVL-SPEC10/05

Outdoor Lighting

A

B

C

1/2" feed thru surface

hub conduit

D

ABCD

147/8" 15" 73/16"7

7/16"

378 mm 381 mm 183 mm 189 mm

Cat. #

Job Type

Approvals

ACCESSORIES

(order as separate part #)

Catalog Number Description

PBT-1 Photocontrol, 120 volt

PBT-234 Photocontrol, 208, 240, 277 volt

PVLV

Full Cutoff Visor, formed aluminum, bronze finish

OPTIONS

(factory installed, add appropriate suffix)

Catalog Number Description

-EM Double Contact Socket for remote power (less lamp) all units

-QSS Quartz Restrike System including relay (less lamp) all units

(double contact bayonet socket)

-RS Hot Restrike System, quickly restores main lamp output after

power outage (HPS only)

Copyright © 2005 HUBBELL LIGHTING All Rights Reserved PVL-SPEC10/05 Printed in USA

Hubbell Outdoor Lighting • 101 Corporate Drive • Spartanburg, SC 29303 • PHONE: 864-599-6000

For more information visit our web site: www.hubbell-ltg.com

Due to our continued efforts to improve our products, product specifications are subject to change without notice.

Outdoor Lighting

PHOTOMETRIC REPORTS

Catalog Number Report #

PVL-175H-12X HP01149.IES

PVL-150S-12X HP01146.IES