49880 Catalog
128844-Catalog 1 128844-Catalog_1 128844-Catalog_1 Batch9 unilog cesco-content
132656-Catalog 132656-Catalog 132656-Catalog Batch9 unilog cesco-content
2014-07-05
: Pdf 49880-Catalog 49880-Catalog 783310 Batch5 unilog
Open the PDF directly: View PDF 
.
Page Count: 500
| Download | |
| Open PDF In Browser | View PDF |
FULL LINE
PRODUCT
CATALOG
HAND TOOLS
HOLEMAKING
BENDING
FISHING
CABLE PULLING
WIRE & CABLE TERMINATION
COMMUNICATIONS
TESTING & MEASUREMENT
STORAGE & MATERIAL HANDLING
HYDRAULIC PUMPS & MISCELLANEOUS
PLUMBING
MADE FOR THE TRADE!™
MADE FOR THE TRADE!™
Nearly 150 years of tools that are Made for the Trade. Backed by superior, hands-on sales
and technical support, many of whom are former industry professionals themselves.
As the preferred brand of electrical contractors, Greenlee offers the most complete
line-up of tools, equipment and accessories a wire or cable installer needs to
complete the job. As we continue to expand through partnerships and product
introductions, you can depend on Greenlee to deliver customer-focused
innovation that takes shape in rugged, quality tools contractors
rely on daily.
This catalog edition features a greatly expanded selection of
tools for telecommunications, datacommunications and
wiring applications, including more than 100 new products
from Paladin Tools®, Greenlee’s most recent addition
of quality products available. With this extensive
product line, we offer a truly complete mix of
tools to ensure a job done right.
Greenlee…designed to perform and
MADE FOR THE TRADE!
MADE FOR THE TRADE!™
Table of
Contents
New Products
Hand Tools
Holemaking
Bending
Fishing
Cable Pulling
Wire & Cable Termination
Communications
Testing & Measurment
Storage & Material Handling
Hydraulic Pumps & Miscellaneous
Plumbing
Authorized Service Centers
Index
2
3
43
111
131
145
177
233
357
409
427
437
466
471
Hand Tools
PRODUCTS
Holemaking
“L” Series
Knockout Punch Drivers 61
Nail Eater® Extreme 83
Hole Saws with Stops 95
MagnumPRO™ Fish Tapes 132
8’ Glo Stix 136
Fishing
®
Wire & Cable Termination
Gator Li-Ion Battery
Powered Cutting Tools 184
Cable Cutter 187
®
Aviation Snips
19
2-Piece Nut Driver Set
27
Fiberglass
Measuring Tapes
31
7 Pocket Caddy
36
Bending
SITE-RITE® Iron and
Aluminum Hand Benders 113
Cable Pulling
Ultra Cable Feeder™
146
Ultra Tugger 4
155
Cable Pull Force
Estimator
159
®
Communications
ProGrip 5-in-1
Fiber Optic Stripper
276
Classic Tone and
Probe Kit
287
GripPack UTP Essentials 338
Testing & Measurement
Non-Contact Self-Testing
Voltage Detector 362
ESM™ Series
Digital Multimeters 365
Circuit Seeker™
Circuit Tracer 384
Rothenberger
ROPRESS Compact
450
ROPRESS Cordless
451
63TC ROCUT
459
Hand Tools
The success of Greenlee's professional hand tools
continues to grow with an even larger collection of
products. Each Greenlee hand tool is "Made for the
Trade" and each kit and accessory has been
carefully assembled to meet the demanding
requirements of today's professional
electrical contractor.
Contents
Pliers
Cutting, Stripping & Crimping
Screw & Nut Drivers
Wrenches
Insulated Drivers
Cutting Tools
Tape Measures, Levels, Hammers & Flashlights
Tool Bags, Pouches, Belts & Work Gloves
Tool Kits
4
8
11
21
25
27
31
34
40
MADE FOR THE TRADE!™
MADE FOR THE TRADE!™
Pliers
Hand Tools
High Leverage Side-Cutting Pliers
0151-09SM
0151-09SD
0151-09M
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
0151-09D
4
• High leverage pliers design and diamond-serrated jaws for optimum
cutting and gripping performance.
• Forged from chrome vanadium steel for greater durability and strength.
• Precision-machined and laser-hardened blades strengthen cutters and
provide consistent performance.
• Effectively cuts hardened wire, ACSR, bolts, screws and nails.
• Through-hardened steel for longer life.
• Exceeds ASME/ANSI specifications.
• Rugged riveted construction for smooth precise action.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Stripping Only
• Stripping hole allows for easy and convenient wire stripping of #12 AWG
wire (0151-09SM & 0151-09SD only).
• The wire looping hole perfectly forms wire for threaded connections
(0151-09SM & 0151-09SD only).
Crimping Only
• Crimping die for non-insulated connectors, lugs and terminals.
Fish Tape Pulling Only
• Pulls 1/8" and 1/4" fish tape.
Molded Grip Only
• Custom grip allows area for user identification.
• Slip-proof, ergonomic molded grips for increased comfort and reduced
user fatigue.
• Wider grip design provides larger load bearing area.
• Location of handle ridge allows for user to “choke up” for greater control.
Dipped Grip Only
• Double layered vinyl handles for comfort and slip resistance.
• Reduced handle size allows for easy storage of tools in pouches and
tool bags.
MOLDED GRIP
0151-09CM
0151-09CD
Cat. No.
UPC No. Description
0151-09SM
89264
0151-08M
0151-09M
0151-09M-CP
0151-09CM
0151-09FM
54701
54702
95925
13488
89265
SPECIFICATIONS
0151-09FM
Overall Length
Weight
0151-09FD
High Leverage Side-cutting Pliers W/Stripping Hole
9" molded grip
High Leverage Side-cutting Pliers 8" molded grip
High Leverage Side-cutting Pliers 9" molded grip
High Leverage Side-cutting Pliers 9" Counter Pack (Qty 5)
Crimping Pliers 9" molded grip
Fish Tape Pulling Pliers 9" molded grip
8"
9"
8-1/2" (21.6 cm)
.87 lbs. (.04 kg)
9-3/8" (23.8 cm)
1.13 lbs. (.51 kg)
DIPPED GRIP
Cat. No.
UPC No. Description
0151-09SD
89262
0151-08D
0151-09D
0151-09CD
0151-09FD
89263
89250
13487
89262
SPECIFICATIONS
Overall Length
Weight
High Leverage Side-cutting Pliers W/Stripping Hole
9" dipped grip
High Leverage Side-cutting Pliers 8" dipped grip
High Leverage Side-cutting Pliers 9" dipped grip
Crimping Pliers 9" dipped grip
Fish Tape Pulling Pliers 9" dipped grip
8"
9"
8-1/2" (21.6 cm)
.87 lbs. (.04 kg)
9-3/8" (23.8 cm)
1.13 lbs. (.51 kg)
www.greenlee.com
Diagonal Cutting Pliers
Hand Tools
• Forged from chrome vanadium steel for greater durability and strength
• Precision-machined and laser-hardened blades strengthen cutters and
provide consistent performance.
• Effectively cuts most hardened wire, ACSR, bolts, screws and nails.
• Through-hardened steel for longer life.
• Dual cutting edges for optimum cutting performance
• Exceeds ASME/ANSI specifications.
• Rugged riveted construction for smooth precise action.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Molded Grip Only
• Custom grip allows area for user identification.
• Flared handles for added comfort and leverage.
• Wider grip design provides larger load bearing area for user comfort.
Dipped Grip Only
• Double layered vinyl handles for comfort and slip resistance.
• Reduced handle size allows for easy storage of tools in pouches and
tool bags.
MOLDED GRIP
0251-08M
Cat. No.
UPC No.
Description
0251-05M
0251-06M
0251-07M
0251-08M
0251-08M-CP
54736
54737
54738
54739
95926
0251-08AM
54740
Diagonal Cutting Pliers 5" Mini molded grip
Diagonal Cutting Pliers 6" molded grip
High Leverage Diagonal Cutting Pliers 7" molded grip
High Leverage Diagonal Cutting Pliers 8" molded grip
High Leverage Diagonal Cutting Pliers 8" molded grip
Counter Pack (Qty 5)
High Leverage Diagonal Cutting Pliers 8" angled molded grip
0251-08D
SPECIFICATIONS
7"
8"
Overall Length
5-1/2" (14.0 cm)
6-1/8" (15.5 cm)
7" (17.8 cm)
8-3/4" (22.2 cm)
Weight
.28 lbs. (.13 kg)
.35 lbs. (.16 kg)
.57 lbs. (.26 kg)
.85 lbs. (.39 kg)
DIPPED GRIP
0251-08AM
Description
0251-05D
0251-06D
0251-07D
0251-08D
0251-08AD
89257
89256
89255
89254
89258
Diagonal Cutting Pliers 5" Mini dipped grip
Diagonal Cutting Pliers 6" dipped grip
High Leverage Diagonal Cutting Pliers 7" dipped grip
High Leverage Diagonal Cutting Pliers 8" dipped grip
High Leverage Diagonal Cutting Pliers 8" angled dipped grip
0251-08AD
SPECIFICATIONS
5"
6"
7"
8"
Overall Length
5-1/2" (14.0 cm)
6-1/8" (15.5 cm)
7" (17.8 cm)
8-3/4" (22.2 cm)
Weight
.28 lbs. (.13 kg)
.35 lbs. (.16 kg)
.57 lbs. (.26 kg)
.85 lbs. (.39 kg)
= Replacement Part
= Accessory
5
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
USA
6"
Tel: 800.435.0786
Fax: 800.451.2632
5"
MADE FOR THE TRADE!™
Long Nose Side Cutting and Stripping Pliers
Hand Tools
• Forged from chrome vanadium steel for greater durability and strength.
• Effectively cuts both solid & stranded copper wire.
• Serrated jaws and laser-hardened cutting edges for optimum cutting and
gripping performance.
• Through-hardened steel for longer life.
• Exceeds ASME/ANSI specifications.
• Rugged riveted construction for smooth precise action.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Stripping Only
• Stripping hole allows for easy and convenient wire stripping of #12 AWG
wire (0351-08SM & 0351-08SD only).
Molded Grip Only
• Custom grip allows area for user identification.
• Flared handles for added comfort and leverage.
• Wider grip design provides larger load bearing area for user comfort.
Dipped Grip Only
• Double layered vinyl handles for comfort and slip resistance.
• Reduced handle size allows for easy storage of tools in pouches and
tool bags.
0351-08M
MOLDED GRIP
0351-08D
Cat. No.
UPC No.
Description
0351-06M
0351-07M
0351-08M
0351-08SM
54717
54718
54719
20958
Long Nose Pliers/Side Cutting 6" molded grip
Long Nose Pliers/Side Cutting 7" molded grip
Long Nose Pliers/Side Cutting 8" molded grip
Long Nose Pliers/Stripping 8" molded grip
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
6
0351-08SM
0351-08SD
6"
7"
8"
Overall Length
6-5/8" (16.8 cm)
7-1/8" (18.1 cm)
8-9/16" (21.7 cm)
Weight
.27 lbs. (.12 kg)
.30 lbs. (.14 kg)
.64 lbs. (.29 kg)
DIPPED GRIP
Cat. No.
UPC No.
Description
0351-06D
0351-07D
0351-08D
0351-08SD
89253
89252
89251
20957
Long Nose Pliers/Side Cutting 6" dipped grip
Long Nose Pliers/Side Cutting 7" dipped grip
Long Nose Pliers/Side Cutting 8" dipped grip
Long Nose Pliers/Stripping 8" dipped grip
SPECIFICATIONS
6"
7"
8"
Overall Length
6-5/8" (16.8 cm)
7-1/8" (18.1 cm)
8-9/16" (21.7 cm)
Weight
.27 lbs. (.12 kg)
.30 lbs. (.14 kg)
.64 lbs. (.29 kg)
www.greenlee.com
Pump Pliers
MOLDED GRIP
0451-10M
Cat. No.
UPC No.
Description
0451-10M
0451-10M-CP
0451-12M
54709
95927
54744
Pump Pliers 10" molded grip
Pump Pliers 10" molded grip Counter Pack (Qty 5)
Pump Pliers 12" molded grip
SPECIFICATIONS
Overall Length
Weight
Adjustment Grooves
Jaw Capacity
0451-16D
10"
12"
10" (25.4 cm)
.83 lbs. (.38 kg)
7
2" (5.1 cm)
12" (30.5 cm)
1.29 lbs. (.59 kg)
7
2-1/4" (5.7 cm)
Hand Tools
• Precision-machined and through-hardened for consistent
performance and longer life.
• Right-angled teeth for gripping in both directions.
• Riveting process ensures joint integrity.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Molded Grip Only
• Custom grip allows area for user identification.
• Slip-proof, ergonomic molded grip for increased comfort and
reduced user fatigue.
• Wider grip design provides larger load bearing area.
Dipped Grip Only
• Double layered vinyl handles for comfort and slip resistance.
• Reduced handle size allows for easy storage of tools in pouches and
tool bags.
DIPPED GRIP
Description
89259
89260
54707
Pump Pliers 10" dipped grip
Pump Pliers 12" dipped grip
Pump Pliers 16" dipped grip
SPECIFICATIONS
Overall Length
16"
10" (25.4 cm)
.83 lbs. (.38 kg)
7
2" (5.1 cm)
12" (30.5 cm)
1.29 lbs. (.59 kg)
7
2-1/4" (5.7 cm)
16" (40.6 cm)
3 lbs. (1.4 kg)
8
4-1/4" (10.8 cm)
= Replacement Part
= Accessory
7
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
12"
Tel: 800.435.0786
Fax: 800.524.2853
Weight
Adjustment Grooves
Jaw Capacity
10"
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
0451-10D
0451-12D
0451-16D
MADE FOR THE TRADE!™
CUTTING, STRIPPING AND CRIMPING TOOLS
Pro Wire Strippers
• Strips the outer jacket off both solid and stranded wire.
• Machined stripping stations with a positive stop provide precise
stripping diameters.
• Ergonomically designed, extra-long cushioned handles add superior comfort
and reduce hand fatigue.
• Long curved cutter blades reduce force required by 25%
and can cut NM in a single cut.
• Lock tab protects cutting edges during storage.
• Pliers nose for working with small nuts and pulling wire.
• Hole in jaws for looping wires.
• Opening stop prevents spring from disengaging.
• Cuts screws.
• Note: These are not insulated tools.
Hand Tools
1950
1951
1955
Cat. No.
UPC No.
Description
1950
1951
1955
1956
06852
06853
06857
10300
Pro Stripper 10-18 AWG
Pro Wire Stripper 22-32 AWG
Pro Plus Wire Stripper, 10-18 AWG
Pro Plus Stripper 8-16 AWG
SPECIFICATIONS
Strips
1956
Cuts
Overall Length
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Wire Stripper/Cutters
8
• Precision ground blades ensure consistent stripping and cutting.
• Heat-treated for long life.
• Cushioned-grip vinyl handle for comfortable use.
• Serrated nose grip for wire pulling and straightening.
• Stamped from high-carbon tool steel.
• Pivot joints have hardened steel bushings.
• Rust-resistant black oxide finish.
• Note: This is not an insulated tool.
1916
Cat. No.
UPC No.
Description
SPECIFICATIONS
1916
1917
1918
31891
31890
31889
20-10 AWG (0.8 to 2.6 mm dia.) Solid Wire
26-16 AWG (0.4 to 1.3 mm dia.) Solid Wire
30-22 AWG (0.25 to 0.64 mm dia.) Solid Wire
Capacity
V-Notch Wire Stripper/Cutter
1913
SPECIFICATIONS
Capacity
Weight
1950 & 1955 – 10-18 AWG solid, 12-20 AWG stranded;
1951 – 22-32 AWG solid, 20-30 AWG stranded;
1956 – 6-14 AWG solid, 8-16 AWG stranded
#6-32 and #8-32 screws
1950 & 1951 – 7-1/4" (18.4 cm)
1955 & 1956 – 7-3/8" (18.7 cm)
30 - 10 AWG (.25 - 6 mm²) with PVC or THHN insulation
.16 lb. (.07 kg)
PVC or THHN insulation
1916 - 20-10 AWG (0.5-6 mm²)
1917 - 26-16 AWG (0.25-1.5 mm²)
1918 - 30-22 AWG (0.25-.34 mm²)
.2 lb. (.10 kg) All Models
Weight
• Stamped from high-carbon tool steel with black oxide finish.
• Pivot joints have hardened-steel bushings.
• Vinyl cushioned grip.
• Precision-ground blades for consistent stripping and cutting.
• Adjustable settings for various wire size.
• Heat treated for long life.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
1913
1914
31894
31893
The Terminators V-Notch Wire Stripper/Cutter
The Terminators V-Notch Wire Stripper/Cutter with Spring and
Lock function
www.greenlee.com
Automatic Wire Stripper
• Production grade wire stripper strips insulation from most
smaller gauge wire.
• Strips up to 7/8" (22.2 mm) length.
• Strips PVC and THHN insulation.
• For use with solid and stranded wire.
• Note: This is not an insulated tool.
1935
Cat. No.
UPC No.
Description
1935
37600
Automatic Wire Stripper
SPECIFICATIONS
45000
Pro Wire Stripper for NM Cable
Capacity
Weight
20 - 10 AWG (.5 mm² - 6 mm²) with PVC or THHN insulation
.7 lb. (.30 kg)
• 34-10 AWG (.08-6mm²) stripping capacity.
• 12 AWG (4 mm²) solid, 10 AWG (6 mm²) stranded capacity.
• Strips and cuts flat and round cable.
• Self-adjusts to different wire gauges.
• Laminated steel blades minimize the risk of nicking conductors.
• Front entry jaws have an adjustable strip length guide.
• Lightweight reinforced nylon is chemical and corrosion resistant.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
45000
20243
45000
20243
Kwik Stripper Wire Stripper
Blade Cassette
1960
SPECIFICATIONS
Pro Stripper 12/2 & 14/2
Removes
Strips
Cuts
Overall Length
NM Cable Ripper
NM-B outer jacket
#12 and #14 AWG solid
#6-32 and #8-32 screws
7-3/4" (19.7 cm)
Cat. No.
UPC No.
Description
0252-11
56300
NM Cable Ripper
SPECIFICATIONS
Overall Length
Weight
= new product
= Replacement Part
= Accessory
3-5/8" (9.2 cm)
.06 lbs. (.03 kg)
9
INTERNATIONAL
0252-11
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Slits outer jacket of Romex® 10/2, 12/2, 14/2 and other non-metallic (NM)
sheathed cable.
• Wire gauge on handle for identifying #6 to #14 AWG.
• Corrosion-resistant zinc plating.
• Side-entry design for end or mid-run slitting of jacket.
• Note: This is not an insulated tool.
CANADA
Description
06854
USA
UPC No.
1960
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Pliers' nose for working with small nuts and pulling wire.
• Machined stripping stations with a positive stop provide precise
stripping diameters for #14 and #12 AWG.
• Strips outer jacket off 14-2 and 12-2 NM cable.
• Long curved cutter blades reduce force required by 25% and can cut
NM in single cut.
• Hole in jaws for looping wires.
• Extra-long cushioned handles add comfort and reduce hand fatigue.
• Lock tab protects cutting edges during storage.
• Cuts #6-32 & #8-32 screws.
• Note: This is not an insulated tool.
Hand Tools
Kwik Stripper Wire Stripper
®
MADE FOR THE TRADE!™
Stripping/Crimping Combination Tool
• Pliers' nose avoids having to switch tools for gripping tasks.
• Extra-narrow nose for getting into tight boxes.
• Machined stripping stations with a positive stop provide precise
stripping diameters.
• Wire looping holes in jaw.
• Long, curved cutter blades reduce force required by 25% and can cut
NM in single cut.
• Screw cutting stations are collapsed around the pivot – 20% less force
is required.
• Smooth, rounded pivot bolt won’t catch in tool pouch or on other tools.
• Comfortable, cushioned grips.
• Note: This is not an insulated tool.
Hand Tools
1927
Cat. No.
UPC No.
Description
SPECIFICATIONS
1927
06851
Stripping/Crimping Combination Tool
Strips
Crimps
Cuts
Overall Length
Crimping/Stripping Combination Tool
• Up-front cutter for snipping hard-to-reach wires.
• Narrow nose for getting into tight boxes.
• Wire looping holes in jaw.
• Screw cutting stations are collapsed around the pivot – 20% less force
is required.
• Machined stripping stations with a positive stop provide precise
stripping diameters.
• Long, curved cutter blades reduce force required by 25% and can cut
NM in single cut.
• Smooth, rounded pivot bolt won’t catch in tool pouch or on other tools.
• Comfortable, cushioned grips.
• Note: This is not an insulated tool.
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
1923
Cat. No.
UPC No.
Description
SPECIFICATIONS
1923
06850
Crimping/Stripping Combination Tool
Strips
Crimps
Cuts
Overall Length
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
8-18 AWG solid, 10-22 AWG stranded
10-22 AWG insulated and non-insulated terminals
#4-40, #6-32, #8-32, #10-24 and #10-32 screws
8-1/2" (21.6 cm)
Combination Tool
1921
10
10-22 AWG solid and stranded
10-22 AWG insulated and non-insulated terminals
#4-40, #5-40, #6-32, #8-32, #10-24 and #10-32 screws
8-1/8" (20.6 cm)
• Crimp, strip and cut wire with a single tool, also cut and
re-thread screws.
• Hardened alloy steel with black oxide finish.
• Pivot joints have hardened-steel bushings.
• New, softer grips.
• Precision-ground blades for fast, easy and consistent wire
stripping and cutting.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
SPECIFICATIONS
1921
31888
The Terminators Combination Tool
Capacity
Length
Weight
PVC or THHN insulation
Cut – 22 - 10 AWG (.34 mm² - 6 mm²)
Strip – 22 - 10 AWG (.34 mm² - 6 mm²)
Crimp – insulated and non insulated, 22 - 10 AWG (.34 mm² - 6 mm²)
Terminals and Splices; 7 and 8 mm Ignition Terminals
Screws – Cut & Re-thread, 10-24, 10-32, 8-32, 6-32 and 4-40
8-5/8" (22.0 cm)
.5 lb. (.23 kg)
www.greenlee.com
Premium Crimping Tool
• Storage for two sets of crimping dies in the handles.
• No tools needed to change dies.
• Precision machined for smooth crimping cycles.
• Hardened mechanism components for long term durability.
• Cushioned handles for comfort.
• Full cycle mechanism assures complete crimps, but tool can be opened
in mid-cycle if necessary.
• Equipped with 3 crimping die sets for 22-10 AWG insulated terminals
(red, yellow, blue), 22-10 AWG uninsulated terminals, and 26-8 AWG
wire ferrules.
K210
Description
SPECIFICATIONS
K210
10873
10874
10875
10876
10877
Crimping Tool with 10873, 10874 & 10875 die sets
Die set, 22-10 AWG Insulated Terminals
Die set, 22-10 AWG Unisulated Terminals
Die set, 26-8 AWG Wire Ferrules
Die set, RG, 58/59/62/71
Die set, 20-10 AWG Barrel Connectors
Overall Length
Weight
Insulated Terminals & Splices
Uninsulated Terminals & Splices
Wire Ferrules
10872
10873
10874
10875
10876
10877
9" (23 cm)
1.35 lbs. (.6 kg)
22-10 AWG
22-10 AWG
26-8 AWG
Crimping/Stripping Combination Tool
Hand Tools
Cat. No. UPC No.
• Two die positions permit the KP1022 to crimp both insulated and
uninsulated terminals and splices.
• Forged steel and hardened design provides long life.
• Smooth pivot action allows tool to easily be used with one hand.
• Double-cushioned handle grips are easy on the hands.
• Precision machined and hardened cutter blades make wire cutting easy.
KP1022
Cat. No.
UPC No.
Description
KP1022
KP1022D
02155
10633
Terminal Crimping Tool with molded grip
Terminal Crimping Tool with dipped grip
SPECIFICATIONS
screw & nut driverS
5-Piece Screwdriver Set
0153-01C
0153-01C-CP
56303
95930
5-Piece Screwdriver Set
5-Piece Screwdriver Set Counter Pack (Qty 5)
SPECIFICATIONS
0153-01C
Contains
Weight
= new product
= Replacement Part
= Accessory
3/16" x 6" Cabinet, 1/4" x 4" Keystone, 1/4" x 6" Cabinet, 5/16" x 6"
Keystone & #2 x 4" Phillips
1.38 lbs. (.63 kg)
11
INTERNATIONAL
Description
CANADA
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Heavy-duty construction for longer life.
• Handle marked for easy identification of screwdriver size, type and length.
• Precision-machined tips for accurate fastener contact.
• Strong, durable black phosphate tips prevent chipping of plating.
• High-grade, rust resistant, chrome-plated finish.
• Soft, cushioned grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
USA
9-1/2" (241 mm)
1.05 lbs. (.48 kg)
10-22 AWG
10-22 AWG
Tel: 800.435.0786
Fax: 800.451.2632
Overall Length
Weight
Insulated Terminals & Splices
Uninsulated Terminals & Splices
KP1022D
MADE FOR THE TRADE!™
7-Piece Screwdriver Set
Hand Tools
• Heavy-duty construction for longer life.
• Handle marked for easy identification of screwdriver size, type and length.
• Precision-machined tips for accurate fastener contact.
• Strong, durable black phosphate tips prevent chipping of plating.
• High-grade, rust resistant, chrome-plated finish.
• Soft, cushioned grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
0153-02C
54661
7-Piece Screwdriver Set
SPECIFICATIONS
Contains
0153-02C
3/16" x 4" Cabinet, 3/16" x 6" Cabinet, 1/4" x 4" Keystone, 1/4" x 4"
Cabinet, 5/16" x 6" Keystone, #1 x 3" Phillips & #2 x 4" Phillips
1.63 lbs. (.74- kg)
Weight
CANADA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
0153-14C
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
Heavy-Duty Keystone Tip Screwdriver
• Square shank allows use of wrench or pliers for added torque.
• Handle marked for easy identification of screwdriver size, type and length.
• Rugged keystone tip for additional strength.
• Precision-machined tips for accurate fastener contact.
• Strong, durable black phosphate tips prevent chipping of plating.
• Soft, cushioned grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description: Heavy Duty Keystone Tip-
0153-11C
0153-12C
0153-13C
0153-13C-CP
54644
54645
54646
95929
0153-14C
0153-15C
0153-16C
54647
56304
56305
Square Shank 1/4" x 4" Flat Blade Screwdriver
Square Shank 1/4" x 6" Flat Blade Screwdriver
Square Shank 1/4" x 8" Flat Blade Screwdriver
Square Shank 1/4" x 8" Flat Blade Screwdriver
Counter Pack (Qty 10)
Square Shank 1/4" x 10" Flat Blade Screwdriver
Square Shank 5/16" x 6" Flat Blade Screwdriver
Square Shank 3/8" x 8" Flat Blade Screwdriver
USA
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
12
Overall Length
Weight
SPECIFICATIONS
Overall Length
Weight
1/4" x 4"
1/4" x 6"
1/4" x 8"
8-11/32" (21.2 cm)
10-11/32" (26.3 cm)
12-11/32" (31.4 cm)
0.25 lbs. (.11 kg)
0.30 lbs. (.14 kg)
0.35 lbs. (.16 kg)
1/4" x 10"
5/16" x 6"
3/8" x 8"
14-11/32" (36.4 cm)
10-15/16" (27.8 cm)
13-7/16" (34.1 cm)
0.40 lbs. (.18 kg)
0.40 lbs. (.18 kg)
0.55 lbs. (.25 kg)
www.greenlee.com
Heavy-Duty Cabinet Tip Screwdriver
0153-21C
• Narrow cabinet tip for limited access applications.
• Handle marked for easy identification of screwdriver size, type and length.
• Precision-machined tips for accurate fastener contact.
• Strong, durable black phosphate tips prevent chipping of plating.
• Soft, cushioned grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
UPC No.
Description: Heavy Duty Cabinet Tip-
0153-21C
0153-22C
0153-23C
0153-24C
0153-25C
0153-26C
0153-27C
54652
54653
54654
54655
54649
54650
54651
Round Shank 3/16" x 4" Flat Blade Screwdriver
Round Shank 3/16" x 6" Flat Blade Screwdriver
Round Shank 3/16" x 8" Flat Blade Screwdriver
Round Shank 3/16" x 10" Flat Blade Screwdriver
Round Shank 1/4" x 4" Flat Blade Screwdriver
Round Shank 1/4" x 6" Flat Blade Screwdriver
Round Shank 1/4" x 8" Flat Blade Screwdriver
SPECIFICATIONS
Overall Length
Weight
3/16" x 4"
Weight
3/16" x 8"
3/16" x 10"
7-3/4" (19.7 cm) 9-3/4" (24.8 cm) 11-3/4" (29.8 cm) 13-3/4" (34.9 cm)
0.15 lbs. (.07 kg) 0.18 lbs. (.08 kg) 0.20 lbs. (.09 kg) 0.22 lbs. (.10 kg)
SPECIFICATIONS
Overall Length
3/16" x 6"
Hand Tools
Cat. No.
1/4" x 4"
1/4" x 6"
1/4" x 8"
8-11/32" (21.2 cm)
0.25 lbs. (.11 kg)
10-11/32" (26.3 cm)
0.30 lbs. (.14 kg)
12-11/32" (31.4 cm)
0.35 lbs. (.16 kg)
Stubby Screwdriver
SPECIFICATIONS
Overall Length
#2 x 1-1/2"
3" (7.6 cm)
0.10 lbs. (.05 kg)
3" (7.6 cm)
0.10 lbs. (.05 kg)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
= Replacement Part
= Accessory
13
INTERNATIONAL
Weight
1/4" x 1-1/2"
CANADA
Description:
Round Shank 1/4" x 1-1/2" Flat Blade Screwdriver
Heavy Duty Phillips Tip #2 x 1-1/2" Screwdriver
Stubby 2PC Screwdriver Set
USA
UPC No.
54648
54657
13491
Tel: 800.435.0786
Fax: 800.524.2853
0153-28C
Cat. No.
0153-28C
0153-32C
0153-04C
Tel: 800.435.0786
Fax: 800.451.2632
0153-32C
• Precision-machined tips for exact fit.
• Handle marked for easy identification of screwdriver size, type and length.
• Strong, durable black phosphate tips prevent chipping of plating.
• Soft, cushioned grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
MADE FOR THE TRADE!™
Heavy-Duty Phillips Tip Screwdriver
Hand Tools
0153-33C
• Precision-machined tips for exact fit.
• Handle marked for easy identification of screwdriver size, type and length.
• Strong, durable black phosphate tips prevent chipping of plating.
• Soft, cushioned grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
0153-31C
0153-33C
0153-34C
0153-35C
0153-36C
54656
54658
54659
54660
89213
Heavy Duty Phillips Tip #1 x 3" Screwdriver
Heavy Duty Phillips Tip #2 x 4" Screwdriver
Heavy Duty Phillips Tip #2 x 6" Screwdriver
Heavy Duty Phillips Tip #3 x 6" Screwdriver
Heavy Duty Phillips Tip #2 x 10" Screwdriver
SPECIFICATIONS
#1 x 3"
#2 x 4"
#2 x 6"
Overall Length
6-3/4" (17.2 cm)
8-5/16" (21.1 cm)
10-5/16" (26.2 cm)
Weight
0.15 lbs. (.07 kg)
0.25 lbs. (.11 kg)
0.30 lbs. (.14 kg)
SPECIFICATIONS
#3 x 6"
Overall Length
Weight
#2 x 10"
11" (27.9 cm)
14-5/16" (36.4 cm)
0.35 lbs. (.16 kg)
0.40 lbs. (.18 kg)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
0153-51C
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Heavy-Duty Crank Action Screwdriver
14
• Rotary action allows for fast & convenient insertion of fasteners.
• Precision-machined tips for exact fit.
• Handle marked for easy identification of screwdriver size type and length.
• Strong, durable black phosphate tips prevent chipping of plating.
• Soft, cushioned grip for extra comfort and torque.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
0153-51C
0153-52C
0153-53C
0153-54C
0353-52C
0353-53C
89211
89212
89209
89210
89220
89221
Cabinet Tip 3/16" x 6" Flat Blade Screwdriver
Cabinet Tip 1/4" x 6" Flat Blade Screwdriver
Phillips Tip #1 x 6" Screwdriver
Phillips Tip #2 x 6" Screwdriver
Square-Recess Tip Driver - #1 x 6"
Square-Recess Tip Driver - #2 x 6"
SPECIFICATIONS
3/16" x 6"
1/4" x 6"
#1 x 6"
Overall Length
9-3/4" (24.8 cm)
10-1/8" (25.7 cm)
9-11/16" (24.6 cm)
Weight
0.16 lbs. (.07 kg)
0.25 lbs. (.11 kg)
0.17 lbs. (.08 kg)
#2 x 6"
#1 x 6"
#2 x 6"
Overall Length
10-1/4" (26.0 cm)
10-1/8" (25.7 cm)
10-1/8" (25.7 cm)
Weight
0.25 lbs. (.11 kg)
0.25 lbs. (.11 kg)
0.25 lbs. (.11 kg)
SPECIFICATIONS
www.greenlee.com
9-In-1 Multi-Tool Driver
• Versatile multi-bit screwdriver, 9 tools in one.
• Drive hex nuts, Phillips, Square-recess and slotted fasteners.
• High-grade, rust resistant, chrome-plated finish.
• Precision machined, hardened steel bits.
• Soft, cushioned grip for extra comfort and torque.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
UPC No.
Description
0153-43C
13490
9953-15
10628
9-In-1 Multi-tool, Contains bits: #1 & #2 Phillips, #1 &
#2 Square Recess and 3/16" & 1/4" Flat Tip
Socket sizes included: 1/4", 5/16" & 3/8"
Replacement bits 9-In-1
0153-43C
SPECIFICATIONS
Length
8" (203 mm)
.45 lbs. (.2 kg)
#1 & #2 Phillips, #1 & #2 Square Recess, 3/16" & 1/4" Flat Tip
1/4", 5/16" & 3/8"
Weight
Bit Sizes
Socket Sizes
Hand Tools
Cat. No.
6-In-1 Multi-Tool
• Versatile multi-bit screwdriver, 6 tools in one.
• Precision machined, hardened steel bits.
• High-grade, rust resistant, chrome-plated finish.
• Soft, cushioned grip for extra comfort and torque.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
0153-42C
Description
89218
0153-42C
56308
0153-42-CP
9953-13
95933
56310
9953-14
89219
6-In-1 Multi-tool, Contains: #1 & #2 Square Recess,
6mm Flat-Tip & #2 Phillips and 1/4" & 5/16" Hex.
6-In-1 Multi-tool, Contains: 3/16" & 1/4" Flat-Tip,
#1 & #2 Phillips and 5/16 & 1/4" Hex.
6-In-1 Multi-tool Counter Pack (Qty 5)
Replacement bits – 3/16" & 1/4" Flat-tip and
#1 & #2 Phillips
Replacement bits – #1 & #2 Square Recess and 6mm
Flat Tip & #2 Phillips
Weight
Bit Sizes
7-1/8" (20.6 cm)
.42 lbs. (.19 kg)
#1 & #2 Square Recess, 6mm Flat-tip, #2 Phillips and 5/16" & 1/4" Hex
= Replacement Part
= Accessory
15
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
Length
Tel: 800.435.0786
Fax: 800.524.2853
SPECIFICATIONS
USA
UPC No.
0353-41C
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
MADE FOR THE TRADE!™
Mini Screwdriver Set
• Precision machined tips for exact fastener fit.
• Strong durable black phosphate tips to prevent chipping or plating.
• Handle marked for easy identification of screwdriver size and type.
• Soft, cushioned grip for extra comfort and no slipping.
• Designed to meet ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Hand Tools
0153-03C
Cat. No.
UPC No.
Description
0153-03C
13438
4-Piece Mini Screwdriver Set (Round Shank):
Sizes #0 Phillips, 1/16" Keystone, 3/32" Cabinet &
1/8" Cabinet
SPECIFICATIONS
Weight
.16 lbs. (.08 kg)
7-Piece Nut Driver Set
• Rugged hollow shaft for screw clearance.
• Heavy-duty construction for longer life.
• Handle and shaft marked for easy identification of nut driver size.
• Precision 6-point sockets for accurate fastener fit.
• High-grade, rust resistant, chrome-plated finish.
• Soft, cushioned grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
0253-01C
16
STANDARD
Cat. No.
UPC No.
Description
0253-01C
54671
7-Piece Nut Driver Set (3" Shank): Sizes 3/16", 1/4",
5/16", 11/32", 3/8", 7/16" & 1/2"
SPECIFICATIONS
Weight
1.65 lbs. (.75 kg)
METRIC
Cat. No.
UPC No.
Description
0253-02C
89225
7-Piece Nut Driver Set (75mm Shank): Sizes 5mm,
5.5mm, 6mm, 7mm, 8mm, 9mm & 10mm
SPECIFICATIONS
Weight
1.65 lbs. (.75 kg)
www.greenlee.com
Heavy-Duty Nut Drivers
• Rugged hollow shaft for bolt clearance.
• Heavy-duty construction for longer life.
• Handle color marked for easy identification of nut driver size.
• Precision 6-point sockets for accurate fastener fit.
• High-grade, rust resistant, chrome-plated finish.
• Soft, cushioned grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
0253-16C
STANDARD
UPC No.
Description
0253-11C
0253-12C
0253-13C
0253-14C
0253-15C
0253-16C
0253-17C
54664
54665
54666
54667
54668
54669
54670
Heavy-Duty Nut Driver 3/16" x 3"
Heavy-Duty Nut Driver 1/4" x 3"
Heavy-Duty Nut Driver 5/16" x 3"
Heavy-Duty Nut Driver 11/32" x 3"
Heavy-Duty Nut Driver 3/8" x 3"
Heavy-Duty Nut Driver 7/16" x 3"
Heavy-Duty Nut Driver 1/2" x 3"
SPECIFICATIONS
3/16" x 3"
Hand Tools
Cat. No.
1/4" x 3"
5/16" x 3"
Overall Length
7-5/16" (18.6 cm)
7-5/16" (18.6 cm)
7-5/16" (18.6 cm)
Weight
0.20 lbs. (.09 kg)
0.20 lbs. (.09 kg)
0.20 lbs. (.09 kg)
SPECIFICATIONS
11/32" x 3"
3/8" x 3"
7/16" x 3"
1/2" x 3"
Overall Length
7-5/16" (18.6 cm) 7-5/16" (18.6 cm) 7-5/16" (18.6 cm) 7-7/8" (20.0 cm)
Weight
0.20 lbs. (.09 kg) 0.20 lbs. (.09 kg) 0.25 lbs. (.11 kg) 0.33 lbs. (.14 kg)
METRIC
= Accessory
Overall Length
7-5/16" (18.6 cm) 7-5/16" (18.6 cm) 7-5/16" (18.6 cm) 7-5/16" (18.6 cm)
Weight
0.20 lbs. (.09 kg) 0.20 lbs. (.09 kg) 0.20 lbs. (.09 kg) 0.20 lbs. (.09 kg)
SPECIFICATIONS
8.0mm x 75mm
9.0mm x 75mm
10.0mm x 75mm
Overall Length
7-5/16" (18.6 cm)
7-5/16" (18.6 cm)
7-5/16" (18.6 cm)
Weight
0.20 lbs. (.09 kg)
0.20 lbs. (.09 kg)
0.20 lbs. (.09 kg)
12.0mm x 75mm
13.0mm x 75mm
SPECIFICATIONS
11.0mm x 75mm
Overall Length
7-5/16" (18.6 cm)
7-7/8" (20.0 cm)
7-7/8" (20.0 cm)
Weight
0.20 lbs. (.09 kg)
0.33 lbs. (.14 kg)
0.33 lbs. (.14 kg)
17
INTERNATIONAL
= Replacement Part
5.5mm x 75mm 6.0mm x 75mm 7.0mm x 75mm
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
5mm x 75mm
Tel: 800.435.0786
Fax: 800.524.2853
SPECIFICATIONS
CANADA
Description
Heavy-Duty Nut Driver 5mm x 75mm
Heavy-Duty Nut Driver 5.5mm x 75mm
Heavy-Duty Nut Driver 6.0mm x 75mm
Heavy-Duty Nut Driver 7.0mm x 75mm
Heavy-Duty Nut Driver 8.0mm x 75mm
Heavy-Duty Nut Driver 9.0mm x 75mm
Heavy-Duty Nut Driver 10.0mm x 75mm
Heavy-Duty Nut Driver 11.0mm x 75mm
Heavy-Duty Nut Driver 12.0mm x 75mm
Heavy-Duty Nut Driver 13.0mm x 75mm
USA
UPC No.
89228
89229
89230
89231
89232
89233
89234
89235
89236
89237
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
0253-33C
0253-34C
0253-35C
0253-36C
0253-37C
0253-38C
0253-39C
0253-41C
0253-42C
0253-43C
MADE FOR THE TRADE!™
2-Piece Stubby Nut Driver Set
Hand Tools
• Rugged hollow shaft for screw clearance.
• Precision 6-point sockets for accurate fastener fit.
• Handles marked for easy identification of nut driver size.
• High-grade, rust resistant, chrome-plated finish.
• Soft, cushioned grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
0253-05-S
Cat. No.
UPC No.
Description
0253-05-S
13520
2-Piece Stubby Nut Driver Set (1-1/2" Shank): Sizes
1/4" & 5/16"
SPECIFICATIONS
Overall Length
Weight
1/4"
5/16"
3-3/4" (95 mm)
0.13 lbs. (.06 kg)
3-3/4" (95 mm)
0.13 lbs. (.06 kg)
4-Piece Square-Recess Tip Driver Set
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Precision tip for accurate fastener fit.
• Handle marked and color coded for easy identification of screwdriver
size and type.
• Heavy-duty construction for longer life.
• High-grade, rust resistant, chrome-plated finish.
• Soft, cushioned grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
18
0353-01C
Cat. No.
UPC No.
Description
0353-01C
54695
4-Piece Square-Recess Tip Driver Set,
Contains - #0 x 4", #1 x 4", #2 x 4", & #3 x 4"
SPECIFICATIONS
Weight
1.0 lbs. (.45 kg)
Square-Recess Tip Drivers
0353-13C
• Precision tip for accurate fastener fit.
• Handle marked and color coded for easy identification of screwdriver
size and type.
• Heavy-duty construction for longer life.
• High-grade, rust resistant, chrome-plated finish.
• Soft, cushioned grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
SPECIFICATIONS
0353-11C
0353-12C
0353-13C
0353-14C
0353-21C
0353-22C
0353-23C
0353-24C
54688
54689
54691
54693
89214
89215
89216
89217
Square-Recess Tip Driver - #0 x 4"
Square-Recess Tip Driver - #1 x 4"
Square-Recess Tip Driver - #2 x 4"
Square-Recess Tip Driver - #3 x 4"
Square-Recess Tip Driver - #0 x 8"
Square-Recess Tip Driver - #1 x 8"
Square-Recess Tip Driver - #2 x 8"
Square-Recess Tip Driver - #3 x 8"
Overall Length
Weight
SPECIFICATIONS
#0 x 4"
#1 x 4"
#2 x 4"
#3 x 4"
7-3/4" (19.7 cm) 7-3/4" (19.7 cm) 8-1/4" (21.0 cm) 8-1/4" (21.0 cm)
0.20 lbs. (.09 kg) 0.20 lbs. (.09 kg) 0.30 lbs. (.14 kg) 0.30 lbs. (.14 kg)
#0 x 8"
#1 x 8"
#2 x 8"
#3 x 8"
Overall Length
11-3/4" (29.8 cm)
11-3/4" (29.8 cm)
11-3/4" (29.8 cm)
11-3/4" (29.8 cm)
Weight
0.4 lbs. (.18 kg)
0.4 lbs. (.18 kg)
0.4 lbs. (.18 kg)
0.4 lbs. (.18 kg)
www.greenlee.com
Stubby Square-Recess Tip Driver
• Precision tip for accurate fastener fit.
• Handle marked and color coded for easy identification of screwdriver
size and type.
• Heavy-duty construction for longer life.
• High-grade, rust resistant, chrome-plated finish.
• Soft, cushion grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
0353-32C
UPC No.
Description
SPECIFICATIONS
0353-02C
89222
2-Piece Square-Recess Tip Stubby Driver Set,
Contains - #1 & #2
Square-Recess Tip Driver - #1 x 1-1/2"
Square-Recess Tip Driver - #2 x 1-1/2"
Overall Length
0353-32C
0353-33C
89223
89224
Weight
2-Piece Set
#1 x 1 - 1/2"
#2 x 1 - 1/2"
3" (7.6 cm)
3" (7.6 cm)
0.22 lbs. (.1 kg)
0.11 lbs. (.05 kg)
0.11 lbs. (.05 kg)
Screw-Holding Screwdriver
• The industry’s finest screw-holding device, available for either slotted
or Phillips screws.
• Easily holds screw in place when installing in hard-to-reach locations.
• Precision tip for accurate fastener fit.
• Heavy-duty construction for longer life.
• Soft, cushioned grip for extra comfort and torque.
• Handle marked for easy identification of screwdriver size and type.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
0453-15C
0453-11C
0453-12C
0453-13C
0453-14C
0453-15C
0453-16C
0453-17C
0453-18C
56311
56312
56313
56314
56315
56316
56317
56318
Screw-holding Screwdriver 3/32" x 5"
Screw-holding Screwdriver 1/8" x 5"
Screw-holding Screwdriver 5/32" x 5"
Screw-holding Screwdriver 3/16" x 6"
Screw-holding Screwdriver 1/4" x 7"
Screw-holding Screwdriver Phillips Tip #0 x 5"
Screw-holding Screwdriver Phillips Tip #1 x 5"
Screw-holding Screwdriver Phillips Tip #2 x 7"
Overall Length
Weight
SPECIFICATIONS
Overall Length
Weight
3/32"
1/8"
5/32"
3/16"
6-5/8" (16.8 cm) 8-5/8" (21.9 cm) 8-5/8" (21.9 cm) 8-5/8" (21.9 cm)
.10 lbs. (.05 kg) .16 lbs. (.07 kg) .16 lbs. (.07 kg) .16 lbs. (.07 kg)
1/4"
#0
#1
#2
11-1/8" (28.3 cm) 6-5/8" (16.8 cm) 8-5/8" (22.0 cm) 11-1/8" (28.3 cm)
.30 lbs. (.14 kg) .10 lbs. (.05 kg) .16 lbs. (.07 kg) .30 lbs. (.14 kg)
2-Piece Nut Holding Driver Set
UPC No.
Description
SPECIFICATIONS
0253-06NH-6
10629
2-Piece Nut Holding Driver Set (6" Shank):
Sizes 1/4" & 5/16"
Overall Length
= Replacement Part
= Accessory
Weight
1/4"
5/16"
10-1/4" (260 mm)
0.29 lbs. (.13 kg)
10-1/4" (260 mm)
0.29 lbs. (.13 kg)
19
INTERNATIONAL
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
0253-06NH-6
• Precision tapered socket holds nut for one-handed operation.
• Patent pending non-magnetic design will not pick up metal chips.
• Rugged hollow shank for screw clearance.
• Handle marked and color coded for easy identification of nut driver size.
• High-grade, rust resistant, chrome-plated finish.
• Soft, cushioned grip for extra comfort and torque.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
CANADA
SPECIFICATIONS
USA
Description:
Tel: 800.435.0786
Fax: 800.524.2853
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
= new product
Hand Tools
Cat. No.
MADE FOR THE TRADE!™
Conduit Reaming Screwdriver
• Deburs ID and OD of 1/2", 3/4" and 1" thin wall conduit.
• Handle marked for easy identification.
• Hardened blade for longer life.
• Hooded, flat tip driver used to fasten EMT fittings.
• Soft, cushioned grip for extra comfort and torque.
• Replaceable blade.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
9753-11C
Hand Tools
9953-11
Cat. No.
UPC No.
Description
9753-11C
9953-11
54696
56319
Conduit Reaming Screwdriver
Replacement blade, Conduit Reaming Screwdriver
SPECIFICATIONS
Capacity
Weight
Overall Length
1/2", 3/4" and 1"
.49 lbs. (.22 kg)
7-7/16" (18.9 cm)
Scratch Awl
CANADA
Cat. No.
UPC No.
Description
9753-12C
54697
Scratch Awl 3"
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
9753-12C
• Integrated steel endcap for durability and long life.
• Heavy-duty construction for piercing and scribing.
• High-grade, rust resistant, chrome-plated finish.
• Soft, cushioned grip for extra comfort.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Overall Length
Weight
7-7/8" (20.0 cm)
.22 lbs. (.10 kg)
Bottle Opener
• Heavy-duty construction to handle any size job.
• High-grade, stainless steel for repeated use.
• Soft cushion grip for extra comfort during extended use.
• Handle marked for easy identification.
9753-13C
Cat. No.
UPC No.
Description
9753-13C
89249
Bottle Opener
USA
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
20
Overall Length
6-7/8" (17.5 cm)
Weight
0.22 lbs. (.1 kg)
www.greenlee.com
Adjustable & Ratcheting wrenches
Composite Handle Adjustable Wrench
0154-10C
Cat. No.
UPC No.
Description
SPECIFICATIONS
0154-08C
0154-10C
0154-12C
56320
56321
56322
Adjustable Wrench Composite Handle 8"
Adjustable Wrench Composite Handle 10"
Adjustable Wrench Composite Handle 12"
Overall Length
Weight
8"
10"
12"
7-7/8" (20.0 cm)
0.66 lbs. (.24 kg)
9-13/16" (24.6 cm)
1.03 lbs. (.48 kg)
11-13/16" (30.0 cm)
1.36 lbs. (.62 kg)
Hand Tools
• Patented lightweight ergonomic design reduces user fatigue.
• Precision-machined to tight tolerances for professional feel
and smooth operation.
• Wide capacity jaw design provides extra versatility.
• Measuring scale on head for easy sizing.
• Corrosion-resistant finish.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Dipped Handle Adjustable Wrench
0154-10D
Description
0154-06D
0154-08D
0154-10D
0154-12D
89275
89291
89292
89293
Adjustable Wrench Dipped Handle 6"
Adjustable Wrench Dipped Handle 8"
Adjustable Wrench Dipped Handle 10"
Adjustable Wrench Dipped Handle 12"
SPECIFICATIONS
Overall Length
Weight
6"
8"
10"
12"
6-7/16" (16.4 cm) 8-7/16" (21.4 cm) 10-3/8" (26.4 cm) 12-3/8" (31.4 cm)
0.35 lbs. (.16 kg) 0.8 lbs. (.36 kg) 1.17 lbs. (.53 kg) 1.9 lbs. (.86 kg)
Adjustable Wrench
0154-06
0154-08
0154-10
0154-12
89276
55483
55484
55485
Adjustable Wrench 6"
Adjustable Wrench 8"
Adjustable Wrench 10"
Adjustable Wrench 12"
SPECIFICATIONS
Overall Length
Weight
= new product
= Replacement Part
= Accessory
6"
8"
10"
12"
6-7/16" (16.4 cm) 8-7/16" (21.4 cm) 10-3/8" (26.4 cm) 12-3/8" (31.4 cm)
0.35 lbs. (.16 kg) 0.8 lbs. (.36 kg) 1.17 lbs. (.53 kg) 1.9 lbs. (.86 kg)
21
INTERNATIONAL
Description
CANADA
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
0154-10
• Heavy-duty construction to handle any size job.
• Precision-machined to tight tolerances for professional feel
and smooth operation.
• Wide capacity jaw design provides extra versatility.
• Measuring scale on head for easy sizing.
• Corrosion-resistant finish.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
• Heavy-duty construction to handle any size job.
• Double-dipped vinyl handle for user comfort and slip resistance.
• Precision-machined to tight tolerances for professional feel and
smooth operation.
• Wide capacity jaw design provides extra versatility.
• Measuring scale on head for easy sizing.
• Corrosion – resistant finish.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
MADE FOR THE TRADE!™
9-Piece Folding Hex-Key Set - Standard
Hand Tools
0254-11
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Cat. No.
UPC No.
Description
0254-11
56323
9-Piece Folding Hex-key Set: Sizes - 5/64", 3/32", 7/64",
1/8", 9/64", 5/32", 3/16", 7/32" & 1/4"
SPECIFICATIONS
Overall Length
9-Piece Folding Ball-End Hex-Key Set - Standard
• 9 piece set for convenience and versatility (including sizes 5/64", 3/32",
7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4").
• Ball-end design allows for angled use up to 30 degrees.
• One-piece, powder-coated handle/case for corrosion resistance.
• Laser-etched sizes on case for easy identification.
• Heat-treated and tempered for extra strength and durability.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
0254-12
55482
9-Piece Folding Ball-end Hex-key Set: Sizes - 5/64",
3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" & 1/4"
SPECIFICATIONS
Overall Length
4-3/8" (11.1 cm)
0.48 lbs. (.22 kg)
Weight
9-Piece Folding Hex-Key Set - Metric
0254-31
• 9 piece set for convenience and versatility (including sizes 1.5, 2, 2.5, 3, 4, 5,
6, 8 and 10 mm).
• One-piece, powder-coated handle/case for corrosion resistance.
• Laser-etched sizes on case for easy identification.
• Heat-treated and tempered for extra strength and durability.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
0254-31
89267
9-Piece Folding Hex-key Set: Sizes - 1.5, 2, 2.5, 3, 4, 5,
5.5, 6, and 7mm.
SPECIFICATIONS
Overall Length
Weight
22
4-3/8" (11.1 cm)
0.48 lbs. (.22 kg)
Weight
0254-12
Tel: 800.435.0786
Fax: 800.451.2632
• 9 piece set for convenience and versatility (including sizes 5/64", 3/32",
7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4").
• One-piece, powder-coated handle/case for corrosion resistance.
• Laser-etched sizes on case for easy identification.
• Heat-treated and tempered for extra strength and durability.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
4-3/8" (11.1 cm)
0.51 lbs. (.23 kg)
www.greenlee.com
7-Piece Combination Ratcheting Wrench Set - Standard
• Compact reversible switch allows a 15° offset of the box end for
clearance of obstacles.
• “Five-degree” ratcheting design for versatility and ease of use in
tight spaces.
• Polished chrome finish for superior corrosion resistance.
• Precision heads for accurate fastener fit.
• Hardened for durability and longer life.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
UPC No.
Description
55501
7-Piece Combination Ratcheting Wrench Set: Contains Sizes 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" & 5/8"
SPECIFICATIONS
0354-01
Weight
1.25 lbs. (.57 kg)
Hand Tools
Cat. No.
0354-01
Combination Ratcheting Wrenches - Standard
Overall Length
0354-11
0354-12
0354-13
0354-14
0354-15
0354-16
0354-17
0354-18
0354-19
0354-20
0354-21
0354-22
0354-23
0354-24
0354-25
0354-26
55494
55495
55496
55497
55498
55499
55500
89268
89269
89270
89271
89272
89273
13517
13518
13519
Combination Ratcheting Wrench 1/4"
Combination Ratcheting Wrench 5/16"
Combination Ratcheting Wrench 3/8"
Combination Ratcheting Wrench 7/16"
Combination Ratcheting Wrench 1/2"
Combination Ratcheting Wrench 9/16"
Combination Ratcheting Wrench 5/8"
Combination Ratcheting Wrench 11/16"
Combination Ratcheting Wrench 3/4"
Combination Ratcheting Wrench 13/16"
Combination Ratcheting Wrench 7/8"
Combination Ratcheting Wrench 15/16"
Combination Ratcheting Wrench 1"
Combination Ratcheting Wrench 1-1/16
Combination Ratcheting Wrench 1-1/8
Combination Ratcheting Wrench 1-1/4
SPECIFICATIONS
Overall Length
Weight
SPECIFICATIONS
Overall Length
Weight
SPECIFICATIONS
Overall Length
Weight
SPECIFICATIONS
Overall Length
Weight
= new product
= Replacement Part
= Accessory
5-5/16" (13.5 cm) 5-5/16" (13.5 cm) 6-1/8" (15.9 cm) 6-1/2" (16.8 cm)
.09 lbs. (.04 kg) .08 lbs. (.08 kg) .12 lbs. (.05 kg) .16 lbs. (.07 kg)
1/2"
9/16"
5/8"
7" (18 cm)
.22 lbs. (.10 kg)
7-3/8" (19 cm)
.26 lbs. (.12 kg)
8-3/8" (21.6 cm)
.37 lbs. (.17 kg)
11/16"
3/4"
13/16"
9-1/16" (23 cm)
.45 lbs. (.2 kg)
9-3/4" (24.8 cm)
.53 lbs. (.24 kg)
11-1/8" (28.3 cm)
.79 lbs. (.36 kg)
7/8"
15/16"
1"
11-1/8" (28.3 cm)
.79 lbs. (.36 kg)
12-11/16" (32.2 cm)
1.1lbs. (.5 kg)
12-11/16" (32.2 cm)
1.1 lbs. (.5 kg)
1-1/16
1-1/8
1-1/4
14" (35.6 cm)
1.44 lbs. (.55 kg)
16.5" (41.9 cm)
2.05 lbs. (.93 kg)
16.5" (41.9 cm)
2.05 lbs. (.93 kg)
23
INTERNATIONAL
Weight
7/16"
CANADA
Description
3/8"
Tel: +1.815.397.7070
Fax: +1.815.397.9247
UPC No.
5/16"
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
1/4"
USA
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.451.2632
0354-15
• Compact reversible switch allows a 15° offset of the box end for
clearance of obstacles.
• “Five-degree” ratcheting design for versatility and ease of use in
tight spaces.
• Polished chrome finish for superior corrosion resistance.
• Precision heads for accurate fastener fit.
• Hardened for durability and longer life.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
MADE FOR THE TRADE!™
7-Piece Combination Ratcheting Wrench Set - Metric
Hand Tools
• Compact reversible switch allows a 15° offset of the box end for
clearance of obstacles.
• “Five-degree” ratcheting design for versatility and ease of use in
tight spaces.
• Polished chrome finish for superior corrosion resistance.
• Precision heads for accurate fastener fit.
• Hardened for durability and longer life.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
0354-02
89274
7-Piece Combination Ratcheting Wrench Set: Contains Sizes 7, 9, 10, 11, 13, 14, and 15 mm
SPECIFICATIONS
Weight
1.3 lbs. (.60 kg)
0354-02
Combination Ratcheting Wrenches - Metric
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
0354-55
24
• Compact reversible switch allows a 15° offset of the box end for
clearance of obstacles.
• “Five-degree” ratcheting design for versatility and ease of use in tight spaces.
• Polished chrome finish for superior corrosion resistance.
• Precision heads for accurate fastener fit.
• Hardened for durability and longer life.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
SPECIFICATIONS
Overall Length
Cat. No.
UPC No.
Description
Weight
0354-51
0354-52
0354-53
0354-54
0354-55
0354-56
0354-57
0354-58
0354-59
0354-60
0354-61
0354-62
0354-63
0354-64
89277
89278
89279
89280
89281
89282
89283
89284
89285
89286
89287
89288
89289
89290
Combination Ratcheting Wrench 6mm
Combination Ratcheting Wrench 7mm
Combination Ratcheting Wrench 8mm
Combination Ratcheting Wrench 9mm
Combination Ratcheting Wrench 10mm
Combination Ratcheting Wrench 11mm
Combination Ratcheting Wrench 12mm
Combination Ratcheting Wrench 13mm
Combination Ratcheting Wrench 14mm
Combination Ratcheting Wrench 15mm
Combination Ratcheting Wrench 16mm
Combination Ratcheting Wrench 17mm
Combination Ratcheting Wrench 18mm
Combination Ratcheting Wrench 19mm
SPECIFICATIONS
Overall Length
Weight
SPECIFICATIONS
Overall Length
Weight
SPECIFICATIONS
Overall Length
Weight
SPECIFICATIONS
Overall Length
Weight
6mm
7mm
8mm
5-5/16" (13.5 cm)
0.08 lbs. (.04 kg)
5-5/16” (13.5 cm)
0.09 lbs. (.04 kg)
5-5/16” (13.5 cm)
0.08 lbs. (.04 kg)
9mm
10mm
11mm
5-9/16” (14.1 cm)
0.10 lbs. (.05 kg)
6-3/16" (15.7 cm)
0.14 lbs. (.06 kg)
6-9/16" (16.7 cm)
0.16 lbs. (.07 kg)
12mm
13mm
14mm
6-13/16" (17.3 cm)
0.18 lbs. (.08 kg)
7-1/16" (17.9 cm)
0.22 lbs. (.1 kg)
7-7/16" (18.9 cm)
0.27 lbs. (.12 kg)
15mm
16mm
17mm
7-13/16" (19.8 cm)
0.31 lbs. (.14 kg)
8-7/16" (21.4 cm)
0.35 lbs. (.16 kg)
9-1/6" (23 cm)
.44 lbs. (.2 kg)
18mm
19mm
9-3/8" (23.8 cm)
0.47 lbs. (.21 kg)
9-11/16" (24.6 cm)
0.57 lbs. (.26 kg)
www.greenlee.com
insulated Drivers
6-Piece Insulated Screwdriver Set
• Rated to 1000 V AC.
• Meets the IEC 60900 and ASTM F1505 standards.
• Heavy-duty construction for longer life.
• Precision-machined tips for accurate fastener contact.
• Strong, durable black phosphate plating prevents chipping
and reduces slipping.
• Ergonomically designed handle for added comfort and torque.
• Lifetime limited warranty.
0157-01i
UPC No.
Description
56325
6-Piece Insulated Screwdriver Set Contains - 3/32" x 3",
5/32" x 4", 7/32" x 5", 1/4" x 6", #1 x 3-1/8" & #2 x 4"
SPECIFICATIONS
Weight
0.77 lbs. (.35 kg)
Hand Tools
Cat. No.
0157-01i
Insulated Screwdrivers
Description
0157-11i
0157-12i
0157-13i
0157-14i
0157-17i
0157-18i
56326
56327
56328
56329
56332
56333
Insulated Screwdriver 3/32" x 3"
Insulated Screwdriver 5/32" x 4"
Insulated Screwdriver 7/32" x 5"
Insulated Screwdriver 1/4" x 6"
Insulated Screwdriver #1 x 3-1/8"
Insulated Screwdriver #2 x 4"
SPECIFICATIONS
SPECIFICATIONS
Overall Length
Weight
= new product
= Replacement Part
= Accessory
7/32"
5-3/4" (14.6 cm)
.04 lbs. (.02 kg)
7-7/8" (20 cm)
.05 lbs. (.13 kg)
8-7/8" (22.6 cm)
.16 lbs. (.07 kg)
1/4"
#1
#2
10-1/4" (26 cm)
.25 lbs. (.09 kg)
7-1/8" (18.1 cm)
.13 lbs. (.06 kg)
8-1/4" (20.6 cm)
.19 lbs. (.09 kg)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Weight
5/32"
25
INTERNATIONAL
Overall Length
3/32"
CANADA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
USA
0157-11i
Tel: 800.435.0786
Fax: 800.451.2632
• Rated to 1000 V AC.
• Meets the IEC 60900 and ASTM F1505 standards.
• Heavy-duty construction for longer life.
• Precision-machined tips for accurate fastener contact.
• Strong, durable black phosphate plating prevents chipping
and reduces slipping.
• Ergonomically designed handle for added comfort and torque.
• Lifetime limited warranty.
MADE FOR THE TRADE!™
7-Piece Insulated Nut Driver Set
• Rated to 1000 V AC.
• Meets the IEC 60900 and ASTM F1505 standards.
• Heavy-duty construction for longer life.
• Rugged deep well sockets for screw clearance.
• Precision sockets for accurate fastener fit.
• Ergonomically designed handle for added comfort and torque.
• Lifetime limited warranty.
Hand Tools
0257-01i
Cat. No.
UPC No.
Description
0257-01i
54679
7-Piece Insulated Nut Driver Set: Contains - Sizes 3/16",
1/4", 5/16", 11/32", 3/8", 7/16" & 1/2"
SPECIFICATIONS
Weight
1.40 lbs. (.64 kg)
Insulated Nut Drivers
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
0257-11i
• Rated to 1000 V AC.
• Meets the IEC 60900 and ASTM F1505 standards.
• Heavy-duty construction for longer life.
• Rugged deep well sockets for screw clearance.
• Precision sockets for accurate fastener fit.
• Ergonomically designed handle for added comfort and torque.
• Lifetime limited warranty.
Cat. No.
UPC No.
Description
0257-11i
0257-12i
0257-13i
0257-14i
0257-15i
0257-16i
0257-17i
54672
54673
54674
54675
54676
54677
54678
Insulated Nut Driver 3/16" x 5"
Insulated Nut Driver 1/4" x 5"
Insulated Nut Driver 5/16" x 5"
Insulated Nut Driver 11/32" x 5"
Insulated Nut Driver 3/8" x 5"
Insulated Nut Driver 7/16" x 5"
Insulated Nut Driver 1/2" x 5"
SPECIFICATIONS
Overall Length
Weight
SPECIFICATIONS
Overall Length
USA
Tel: 800.435.0786
Fax: 800.451.2632
Weight
26
3/16"
1/4"
5/16"
11/32"
9-1/4" (23.5 cm) 9-1/4" (23.5 cm) 9-1/4" (23.5 cm) 9-1/4" (23.5 cm)
0.20 lbs. (.09 kg) 0.20 lbs. (.09 kg) 0.20 lbs. (.09 kg) 0.20 lbs. (.09 kg)
3/8"
7/16"
1/2"
9-1/4" (23.5 cm)
0.20 lbs. (.09 kg)
9-1/4" (23.5 cm)
0.20 lbs. (.09 kg)
9-1/4" (23.5 cm)
0.20 lbs. (.09 kg)
www.greenlee.com
CUTTING tools
Aviation Snips
• Drop-forged, chrome-moly steel blades with serrated edges.
• Includes left, right and straight-cut versions with color coded grips
green (right), yellow (straight), red (left).
• Cuts up to 18-gauge steel or 24-gauge stainless.
• Auto-release latch for one-handed operation.
• Compund leverage design reduces effort required by user.
• Meets ANSI/ASTM standards.
0653-01L
UPC No.
Description
0653-01L
0653-01R
0653-01S
13393
13394
13395
Left (Red) Aviation Snip molded grip
Right (Green) Aviation Snip molded grip
Straight (Yellow) Aviation Snip molded grip
SPECIFICATIONS
Overall Length
Weight
LEFT
RIGHT
STRAIGHT
10" (25 cm)
0.85 lbs. (.39 kg)
10" (25 cm)
0.85 lbs. (.39 kg)
10" (25 cm)
0.85 lbs. (.39 kg)
Hand Tools
0653-01R
Cat. No.
0653-01S
= new product
= Replacement Part
= Accessory
Cat. No.
UPC No.
Description
1969
23948
Multi-Cable Cutter
27
INTERNATIONAL
Overall Length
Weight
Solid/stranded copper wire up to 8 AWG
Coaxial cable up to RG6 Quadshield
Multi-conductor cable up to 1/2" (13mm) diameter
Holes for shearing #6-32 and #8-32 screws
7" (17.8 cm)
.375 lbs. (.17 kg)
CANADA
Cuts:
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
1969
• Cuts solid/stranded wire, coaxial cable and multi-conductor cable.
• Curved cutting blade reduces force required and provides a clean cut.
• Anvil cutter for solid/stranded copper wire up to 8 AWG.
• Heavy-duty cutting blades for longer life when cutting coaxial cable.
• Ergonomically designed cushioned handles add superior comfort and
reduces hand fatigue.
• Opening stop prevents spring from disengaging.
• Lock tab protects cutting edges during storage.
• Note: This is not an insulated tool.
USA
Tel: 800.435.0786
Fax: 800.451.2632
Multi-Cable Cutter
MADE FOR THE TRADE!™
Cable Cutter
• Easily cuts heavier copper and aluminum cables up to 2/0 (70 mm²).
• Precision-ground, shear-action, curved cutting blades.
• 727 has PVC-covered, high-leverage handles for easier cuts.
• 727M has cushion grip, high-leverage handles for added comfort.
• Heat-treated for long life.
• Made of heavy-duty forged steel.
• Rust-resistant black oxide finish.
• Note: This is not an insulated tool.
Hand Tools
727
727M
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
UPC No.
Description
727
727M
31291
12629
Cable Cutter
Cable Cutter with Molded Grip
SPECIFICATIONS
Copper
Max Capacity
Utility Knife
Aluminum
Comm. Cable
2/0 (70 mm2)
9-1/4" (235 mm)
1 lb. (.45 kg)
100 pair
2/0 (70 mm )
2
Frequent Use Capacity
Overall Length
Weight
#1 AWG (35 mm2)
• Over-molded for secure, comfortable grip.
• Retractable three-position blade for safety and convenience.
• Easy front-loading design provides for quick blade change.
• Blade storage in pop-up holder.
• Packaged with three heavy-duty patented serrated blades (Cat # 9952-11).
• Note: This is not an insulated tool.
0652-11
28
Cat. No.
9952-11
Cat. No.
UPC No.
Description
0652-11
0652-11-CP
9952-11
54729
95928
56301
Utility Knife with blades
Utility Knife with blades Counter Pack (Qty 10)
Blades for 0652-11 Utility Knife, 5 pack
SPECIFICATIONS
Overall Length (closed)
Weight
6-3/16" (15.7 cm)
.44 lb. (.20 kg)
Keyhole Saw
301A
• Integrated blade and handle design provides maximum strength.
• Ergonomic handle with non-slip grip.
• Hardened steel blade with clog-free teeth.
• Pointed tip easily punches through drywall.
• Blade cuts on both push and pull strokes.
• Hole in handle may be used for lanyard or convenient storage.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
301A
23641
6" Keyhole Saw
SPECIFICATIONS
Overall Length
Weight
11-5/8" (29.5 mm)
.27 lb. (.12 kg)
www.greenlee.com
Retractable Saw Set
• 6" blade retracts into the handle for convenience and safety.
• Quickly change blade for added versatility.
• Accepts most 6" (or shorter) standard reciprocating saw blades.
• Ergonomically designed handle allows force to be applied both on the push
and pull stroke.
• Built-in blade storage area can hold 2 additional blades.
• Adjustable blade can be used at any length or the 3 hard stops can be used
for aggressive sawing.
• Jab blade and a bi-metal blade included.
• U.S. Patent #D527,602.
• Note: This is not an insulated tool.
311
SPECIFICATIONS
8-3/8"
1-3/4"
1-1/8"
.35 lbs.
21.3 cm (33.0 cm blade extended)
4.3 cm
2.8 cm
1.6 kg
Cat. No.
UPC No.
Description
311
311-JAB
13110
71945
Retractable Saw Set
Jab Blades
Hand Tools
Overall Length:
Height:
Width:
Weight:
capacity
Jab Blade
Bimetal Blade
Drywall, Ceiling Tile, Wood
Conduit, Metal, PVC, Plastics
12" Heavy Duty Hack Saw
• Over-molded rugged design for heavy-duty use and comfort.
• Fully-adjustable blade tension up to 30,000 psi for longer blade life and
faster, accurate cuts.
• Alternative 45° blade mounting allows for flush cutting.
• Mounting for most reciprocating saw blades for extra versatility.
• Handy blade storage in tubular frame.
• Convenient front grip feature for two-handed sawing.
• Complete with bi-metal blade (12"/24 TPI).
• Lifetime limited warranty.
333A
Weight
Max. Blade Tension
15-3/4" (40.0 cm)
2.15 lbs. (.98 kg)
30 KSI
UPC No.
Description
333A
333-1218
333-1224
333-1232
23635
10037
10038
10039
12" Heavy Duty Hacksaw
12" (30.5 cm) Bi-metal Blades, 18 teeth per inch, 5 pack
12" (30.5 cm) Bi-metal Blades, 24 teeth per inch, 5 pack
12" (30.5 cm) Bi-metal Blades, 32 teeth per inch, 5 pack
UPC No.
00113
00114
00115
00116
SPECIFICATIONS
Overall Length
Weight
= new product
= Replacement Part
= Accessory
blade length
13" (33.0 cm)
18" (45.7 cm)
13" (33.0 cm)
18" (45.7 cm)
Description
PVC Saw
PVC Saw
Blade for 00113
Blade for 00114
13"
18"
18.75" (47.6 cm)
.69 lbs. (.31 kg)
23-3/4" (60.3 cm)
.82 lbs. (.37 kg)
29
INTERNATIONAL
Cat. No.
322-013
322-018
322-113
322-118
Tel: +1.815.397.7070
Fax: +1.815.397.9247
322-013
• “V” tooth design enables straight cuts on both push and pull saw strokes.
• Blade can be resharpened for extended use.
• Pointed blade nose makes drywall surface penetration easy.
• Ergonomic handle is interchangeable with most popular PVC saw brands.
Tel: 800.435.0786
Fax: 800.524.2853
322-018
CANADA
PVC Saws
USA
Overall Length
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
MADE FOR THE TRADE!™
PVC Cutters
• Cuts 3/4” schedule 40 PVC
• Cuts 1/8” - 1-3/8” (3-35mm) O.D. flexible plastic pipe
• Diecast aluminum alloy body for added strength and blade guide
for square cuts.
• Reversible blade for twice the life.
• Handle latch for safety.
862
Cat. No.
UPC No.
Description
862
89806
Plastic Pipe Cutter
Hand Tools
SPECIFICATIONS
Capacity
Weight
Up through 1-3/8" O.D. Flexible Plastic Pipe
0.36 lbs. (0.16 kg)
PVC Cutter for up to 1-1/4"
• Ratchet action for fast, easy cutting.
• Heat-treated, replaceable steel blade for long cutting life.
• Rugged metal alloy frame for durability.
864
Cat. No.
UPC No.
Description
864
00355
04253
00355
PVC Cutter for up to 1-1/4"
Blade Kit
SPECIFICATIONS
PVC Cutter for up to 2"
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
Up thru 1-1/4" PVC
0.8 lbs. (0.4 kg)
• High-leverage compound ratchet action and long handles reduce effort.
• Heavy-duty metal frame for cutting large diameters.
• Replaceable steel blade may be sharpened.
865
30
Capacity
Weight
Cat. No.
UPC No.
Description
865
07978
07982
07987
09865
07978
07982
07987
PVC Cutter for up to 2"
Blade
Pressing Spring
Ratchet Spring
SPECIFICATIONS
Capacity
Weight
Up thru 2" PVC
2.5 lbs. (1.1 kg)
Flex Splitter® MC Flexible Cable/Conduit Cutter
1940
• Cut steel or aluminum metal clad cable or conduit in seconds with a few
turns of the crank.
• Thumb screw allows for easy adjustment for cable sizes from 14-2
thru 10-5.
• Spring loaded cable guide allows for quick repeat cuts.
• Easily adjust for the new MCap tight wound cable.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
1940
1941-1
1941-5
34953
00288
33735
Flex Splitter® Flexible Metal Conduit Cutter
Single Replacement Blade for 1940
5 Pack Replacement Blades for 1940
SPECIFICATIONS
Capacity
Weight
14/2 to 10/4 BX 3/8" flexible metal conduit
1940 - 4 lbs. (1.8 kg)
www.greenlee.com
EMT Conduit Cutter
• Patented cutting wheel scores the conduit allowing the user to snap it in two.
Eliminates the need to debur the ID.
• Simple to use-just tighten the screw, turn the tool around the conduit,
and snap the conduit in two!
• Heavy duty cast body for long life.
• Large smooth spindle knob is easy to grip and doesn’t hurt your hand.
• Replaceable cutter wheel.
8600
UPC No.
Description
8600
11917
11915
11917
Conduit Cutter
Cutter Wheel for 8600
SPECIFICATIONS
Overall Length
Weight
Cutting Capacity
FULLY OPEN - 8-1/4" (21.0 cm) • FULLY CLOSED - 7" (17.8 cm)
1.2 lb. (.55 kg)
Cuts 1/2" and 3/4" diameter EMT electrical conduit
tape measures, levels, Hammers & flashlights
Hand Tools
Cat. No.
Fiberglass Measuring Tapes
• 3/4" extra-wide, heavy-duty fiberglass tape is nonconductive.
• High-impact ABS case with rubber bumpers and grip.
• 3 to 1 gear drive for fast rewinds.
• Heavy-duty end hook with loop.
• 2-sided, 2-color tape features decimal feet and fractional inches.
• Magnetic latch retains end hook for storage.
• Steel-reinforced folding handle.
• Note: This is not an insulated tool.
0155-100
Description
0155-100
0155-200
13483
13484
Fiberglass Measuring Tapes, double sided, 100'
Fiberglass Measuring Tapes, double sided, 200'
SPECIFICATIONS
Overall Length
Weight
100'
200'
12" (30.5 cm)
2.1 lbs. (1 kg)
14" (35.6 cm)
3.1 lbs. (1.4 kg)
0155-16
Tel: 800.435.0786
Fax: 800.524.2853
0155-25
UPC No.
Description
0155-25A
0155-16A
0155-7MA
12479
12478
12477
Power Return Tape Measure, double tang/sided, 25'
Power Return Tape Measure, double tang/sided, 16'
Power Return Tape Measure, double tang/sided, 7.5 meter
0155-7M
SPECIFICATIONS
Tape Width
Weight
Standout
= new product
= Replacement Part
= Accessory
25'
7.5M
16'
1" (2.5 cm)
0.89 lbs. (.40 kg)
6'
1" (2.5 cm)
0.89 lbs. (.40 kg)
6'
1" (2.5 cm)
.64 lbs. (.29 kg)
6'
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
31
INTERNATIONAL
• Compact housing fits easliy in the hand or pouch.
• Easy to use Click Lock holds tape securely.
• Tough ABS case with rubber over mold.
• Rigid 1" wide nylon coated blade is double-sided.
• Multi-riveted double tang foot for strength.
• 16" and 19.2" stud markings.
• 0155-7MA has Metric and English markings.
• Note: This is not an insulated tool.
CANADA
Power-Return Tape Measures
Tel: 800.435.0786
Fax: 800.451.2632
UPC No.
USA
0155-200
Cat. No.
MADE FOR THE TRADE!™
Mini Magnetic Bubble Level
• Professional grade level with bending offset aid.
• Mini torpedo design with handy “no-dog” attachment for bending.
• Three rare earth magnets provide superior holding strength.
• Four vial design - 0°, 90°, 45°, and 30°.
• Machined from aluminum alloy and anodized to aircraft standards.
• Compact size fits easily in tool pouch.
• Cutouts on top of level for easy view of vials.
Hand Tools
L77
Cat. No.
UPC No.
Description
L77
11617
Mini Magnetic Bubble Level
SPECIFICATIONS
Overall Length
Width
Height
Weight
5-1/2" (140 mm)
3/4" (19 mm)
1-1/2" (38 mm)
.22 lbs. (.10 kg)
Mini-Magnet Laser Level
• Professional grade laser level.
• Mini torpedo design with handy “no dog” attachment for bending.
• Three rare earth magnets provide superior holding strength.
• Compact size with 80-plus yard range.
• Laser is capable of working on all planes.
• Four vial design – 0°, 90°, 45° and 30°.
• Cutouts on top of level for easy view of vials.
• Offsets and calculations permanently laser engraved onto level.
• V-groove on bottom for mounting on conduit.
• Requires (2) "N" style batteries
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Cat. No.
UPC No.
Description
L97
03582
Laser Level
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
L97
32
Overall Length
Width
Height
Weight
5-5/8" (14.3 cm)
3/4" (1.9 cm)
1-3/4" (4.6 cm)
.46 lbs. (.21 kg)
Electrician’s Torpedo Level
L107
• Professional grade level.
• Perfect for pipe and conduit work.
• Four rare earth magnets allow for hands-free use on metal surfaces.
• Four vial design – 0°, 30°, 45° and 90°.
• Machined from aluminum alloy and anodized to aircraft standards.
• Cutouts on top of level for easy view of vials.
Cat. No.
UPC No.
Description
L107
03583
Level, Torpedo
SPECIFICATIONS
Overall Length
Width
Height
Weight
8-1/2" (21.6 cm)
3/4" (1.9 cm)
1-1/4" (3.2 cm)
.34 lbs. (.16 kg)
www.greenlee.com
Flexible LED Flashlight
• Small 9/32" head will illuminate tight spaces other flashlights cannot.
• 16" flexible PVC coated cable will bend and hold the desired state.
• Runs up to 100 hours on two AA batteries (included).
• Rugged white LED light source lasts over 50,000 hours.
• Anodized aluminum housing with push-button ON/OFF switch on tail-cap.
• Note: This is not an insulated tool.
Cat. No.
UPC No.
Description
FL2AAF
10220
Flexible LED Flashlight
Overall Length
Weight
21.75" (55.3 cm) Extended
.33 lbs. (.15 kg) With Batteries
FL2AAF
Hand Tools
SPECIFICATIONS
Pocket-Light Flashlight With LEDs
• Made of tough Lexan® polycarbonate.
• Luminous tip so flashlight can be located in the dark.
• Batteries included.
• Lifetime limited warranty.
• Submersible to 500'.
Description
Pocket-Light Flashlight
Lamp Module
O-Ring
46503
= Accessory
Description
46503
46533
46534
46503
46533
46534
Mini Pocket-Light Flashlight
Lamp Module
O-Ring
33
INTERNATIONAL
= Replacement Part
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Includes key ring and handy hat/clothing clip.
• Submersible to 500'.
• Batteries included.
• Made of tough impact resistant ABS.
• Compact pocket and key chain light.
CANADA
Mini Pocket-Light Flashlight
Tel: 800.435.0786
Fax: 800.451.2632
UPC No.
46500
46533
46534
USA
46500
Cat. No.
46500
46533
46534
MADE FOR THE TRADE!™
Electrician’s Hammer
• Elongated neck and narrow striking face for use in boxes
and other confined areas.
• Long straight claws designed for electrical fixture removal.
• Lightweight, durable fiberglass handle for shock resistance.
• Cushioned grip and flared handle end for user comfort
and to reduce slipping.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
Hand Tools
0156-11
Cat. No.
UPC No.
Description
0156-11
54698
18 oz. Electrician’s Hammer
SPECIFICATIONS
Overall Length
Weight
12-1/2" (31.8 cm)
1.70 lbs. (.77 kg)
Straight Claw Hammer
• Universal design perfect for a variety of applications.
• Lightweight, durable fiberglass handle for shock resistance.
• Cushioned grip and flared handle end for user comfort and to
reduce slipping.
• Exceeds ASME/ANSI specifications.
• Lifetime limited warranty.
• Note: This is not an insulated tool.
0156-12
Cat. No.
UPC No.
Description
0156-12
89266
16 oz. Straight Claw Hammer
SPECIFICATIONS
34
INTERNATIONAL
CANADA
12-3/4" (32.4 cm)
1.57 lbs. (.71 kg)
tool bags, pouches, belts & Work Gloves
20" Electrician’s Bag
• Constructed of heavy-duty canvas for durability.
• Sixteen canvas, interior & exterior pockets for additional versatility.
• Full-grain leather bottom, sides and riveted buckle straps.
• Washer rivets for extra strength.
• Wrap around handles with reinforced stitching fully support bag
bottom for heavy load capacity.
• Reinforced bottom helps retain bag shape, while protecting and
supporting tools.
• Large-opening steel-framed mouth with hinge for rugged use
and easy access to contents.
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Overall Length
Weight
Cat. No.
UPC No.
Description
0158-11
56334
20" Electrician’s Canvas Bag
SPECIFICATIONS
0158-11
Dimensions
Weight
L - 20" (50.8 cm), W- 12" (30.5 cm), H - 10" (25.4 cm)
4.25 lbs. (1.93 kg)
www.greenlee.com
18" Heavy-Duty Multi-Pocket Bag
0158-12
• Constructed of heavy-duty nylon for longer life.
• Thirty-one multi-use reinforced pockets, inside and out help organize tools
and accessories.
• Large-opening steel-framed mouth with hinge and zipper for rugged use
and easy access to contents.
• Padded handles and adjustable shoulder strap for comfort and versatility.
• Large interior to easily carry power tools, fish tapes and other large tools.
• Wrap around handles with reinforced stitching fully support bag bottom
for heavy load capacity.
• Elastic straps on outside of bag for levels, hammers and crowbars.
UPC No.
Description
56335
18" Heavy-Duty Multi-pocket Bag
SPECIFICATIONS
Dimensions
L - 18" (45.7 cm), W- 11" (27.9 cm), H - 10" (25.4 cm)
3.55 lbs. (1.61 kg)
Weight
11" Cordura® Open Tool Carrier
• Constructed of a double-layer of rugged, lightweight Cordura® fabric.*
• Versatile thirty-seven pocket and loop design keeps tools organized.
• Large square opening with snap handle allows for easy access to spacious
interior and pockets.
• Box-shaped design and sturdy reinforced bottom with rubber feet prevent
tipping.
• Heavy-duty box stitching with washer riveting at all stress points for extra
strength and longer life.
• Padded handle, adjustable shoulder strap and additional built-in straps for
extra versatility.
• Heavy-duty tape measure holder accepts and holds any size tape securely.
0158-13
Description
0158-13
56336
11" Cordura Open Tool Carrier
SPECIFICATIONS
L - 11" (27.9 cm), W- 9" (22.9 cm), H - 10" (25.4 cm)
4.55 lbs. (2.07 kg)
Weight
*Cordura® is a registered trademark for durable fabric.
UPC No.
Description
0158-19
13388
16" Tool Carrier Bag with Parts Bin
SPECIFICATIONS
Dimensions
Weight
= Replacement Part
= Accessory
H - 10" (25.4 cm), D - 10" (25.4 cm), W - 16" (40.6 cm)
4.1 lbs. (1.9 kg)
35
INTERNATIONAL
Cat. No.
CANADA
0158-19
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Versatile 15-pocket design accommodates a wide variety of hand tools.
• 13" x 9" mult-compartment plastic tray for small parts storage including
connectors, wire nuts, screws, etc.
• Padded shoulder strap and carrying handle.
• Metal tool clip, electrical tape strap, tape measure clip and
4 pencil/punch tubes.
• Main pocket with web loops to accommodate large tools.
• Constructed of heavy-duty fabric for durability.
• Steel-reinforced edges to maintain shape.
Tel: 800.435.0786
Fax: 800.524.2853
16" Tool Carrier with Parts Bin
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
Dimensions
= new product
Hand Tools
Cat. No.
0158-12
MADE FOR THE TRADE!™
Nut Driver Bag
Hand Tools
• Easily carries up to ten nut drivers or similar size hand tools.
• Drawstring top keeps tools secure.
• Carry handle or belt loop for convenience.
• Compact and portable design keeps nut drivers organized and easily
accessible even within a larger tool bag or box..
• Constructed of heavy-duty fabric for durability.
• Reinforced sides to maintain shape.
Cat. No.
UPC No.
Description
0158-18
13387
Nut Driver Bag
SPECIFICATIONS
Dimensions
H - 6-1/2" (16.5 cm), W- 9" (22.9 cm), D - 4" (10.1 cm)
.7 lbs. (.32 kg)
Weight
0158-18
(Nut drivers not included)
3-Piece Pouch/Belt Combo
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Pouch handles allow for easy carrying and storage without spilling tools.
• Design features two versatile pouches that are removable and
interchangeable.
• 3" padded belt features foam core padding for extra comfort and support of
heavy tools.
• Double layer heavy-duty fabric for durability; will not rot, crack or mildew.
• Cordless drill holster.
• Includes electrician's metal tape chain, hammer loop and tool clip for
convenience.
• Made to fit 29"-46" waist.
Cat. No.
UPC No.
Description
0158-16
89205
3-Piece Pouch/Belt Combo
SPECIFICATIONS
Dimensions
0158-16
H - 13" (33 cm), D - 5" (12.7 cm), L - 53" (134.6 cm)
3.3 lbs. (1.5 kg)
Weight
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
Tel: 800.435.0786
Fax: 800.524.2853
7 Pocket Caddy
• Constructed of a double-layer of rugged, lightweight Codura® fabric.
• Versatile seven-pocket design easily accommodates a wide variety of
professional hand tools.
• Large capacity pockets allow for easy access to contents.
• Extra versatile design may be carried using handle or worn on a tool belt.
• Padded handle design for easy storage.
• Heavy-duty electrical tape chain.
• Heavy-duty tape measure holder accepts and holds any size tape securely.
0158-17
Cat. No.
UPC No.
Description
0158-17
13386
7 Pocket Caddy
SPECIFICATIONS
Dimensions
36
Weight
H - 11" (27.9 cm), W - 8" (20.3 cm), D - 4" (10.1 cm)
.95 lbs. (.43 kg)
*Cordura® is a registered trademark for durable fabric.
www.greenlee.com
20-Pocket Tool Caddy
• Constructed of a double-layer of rugged, lightweight Cordura® fabric.*
• Versatile twenty-pocket design easily accommodates a wide variety of
professional hand tools.
• Large capacity pockets allow for easy access to contents.
• Padded handle and shoulder strap design for easy storage and the best way
to carry a loaded tool pouch.
• Heavy-duty tool snap and electrical tape strap.
• Steel hammer holder loop.
• Extra versatile design may be carried using shoulder strap or handle,
or worn on a tool belt.
• Heavy-Duty tape measure holder accepts and holds any size tape securely.
UPC No.
Description
0158-15
56337
20-Pocket Tool Caddy
SPECIFICATIONS
Dimensions
L - 10" (25.4 cm), W- 7" (17.8 cm), H - 13" (33.0 cm)
1.45 lbs. (.66 kg)
Weight
Hand Tools
0158-15
Cat. No.
*Cordura® is a registered trademark for durable fabric.
Heavy-Duty 8-Pocket Leather Pouch
• Large, divided main pocket area designed for easy storage and tool access.
• Four smaller compartments for additional tool organization.
• Washer rivets for extra strength.
• Extra large metal tool clip.
• Tapered compartments for tool stability.
• Tape chain included.
• Fits belts up to 3" wide.
• Top grain leather – won’t fade or stain.
• Heavy-Duty tape measure holder accepts and holds any size tape securely.
Description
Heavy-Duty 8-Pocket Leather Pouch
SPECIFICATIONS
Dimensions
0258-11
UPC No.
Description
56340
Heavy-Duty 5-Pocket Leather Pouch
SPECIFICATIONS
0258-13
Dimensions
Weight
= new product
= Replacement Part
= Accessory
L - 6" (15.2 cm), W- 3-1/2" (8.9 cm), H - 11" (27.9 cm)
1.2 lbs. (.55 kg)
37
INTERNATIONAL
Cat. No.
0258-13
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Large main pocket area designed for easy storage and tool access.
• Four smaller compartments for additional tool organization.
• Washer rivets for extra strength.
• Extra large metal tool clip.
• Tapered compartments for tool stability.
• Tape chain included.
• Fits belts up to 3" wide.
• Top grain leather – won’t fade or stain.
• Heavy-Duty tape measure holder accepts and holds any size tape securely.
Tel: 800.435.0786
Fax: 800.524.2853
Heavy-Duty 5-Pocket Leather Pouch
CANADA
L - 7" (17.8 cm), W- 6" (15.2 cm), H - 10-1/2" (26.7 cm)
1.8 lbs. (.82 kg)
Weight
USA
UPC No.
56339
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
0258-11
MADE FOR THE TRADE!™
Heavy-Duty 4-Pocket Leather Pouch
• Four compact pocket areas designed for easy storage and tool access.
• Washer rivets for extra strength.
• Metal tool clip.
• Tapered compartments for tool stability.
• Tape chain included.
• Fits belts up to 3" wide.
• Top grain leather – won’t fade or stain.
0258-14
Cat. No.
UPC No.
Description
0258-14
56341
Heavy-Duty 4-Pocket Leather Pouch
Hand Tools
SPECIFICATIONS
Dimensions
L - 5" (12.7 cm), W- 2-3/4" (7.1 cm), H - 9" (22.9 cm)
.43 lbs. (.82 kg)
Weight
Heavy-Duty Leather Tool Belt
9858-11
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• 2" wide leather belt
• Steel roller double-pronged buckle
• Can be cut to fit 29" to 52" waist
Cat. No.
UPC No.
Description
9858-11
56347
Heavy Duty Leather Tool Belt
SPECIFICATIONS
Dimensions
Weight
L - 57" (121 cm), H - 2" (5.1 cm)
.68 lbs. (.31 kg)
Padded Tool Belt
• 5" wide padded tool belt.
• Sturdy construction for support of heavy tool pouches.
• Foam core padding for extra comfort.
• Double layer of rugged, lightweight fabric will not rot, crack,
harden or mildew.
• Steel roller double-pronged buckle.
• Made to fit 30" to 46" waist.
Cat. No.
UPC No.
Description
9858-12
56348
5" Padded Tool Belt
SPECIFICATIONS
9858-12
Dimensions
Weight
38
L - 50" (12.7 cm), H - 5" (12.7 cm)
.93 lbs. (.42 kg)
www.greenlee.com
12" Canvas Zipper Bag
• Constructed of heavy-duty canvas for durability.
• Strong zipper for secure closing.
• Stores multiple small items or tools.
Cat. No.
UPC No.
Description
0158-14
56338
12" Canvas Zipper Bag
SPECIFICATIONS
Dimensions
0158-14
L - 12" (30.5 cm), H - 7" (17.8 cm)
.17 lbs. (.08 kg)
Weight
• 2 large pockets to hold a variety of tools and miscellaneous small items.
• Canvas waist ties.
• Double-stitched and reinforced at stress points for extra strength.
• Fits 20"-48" waist.
0258-16
Cat. No.
UPC No.
Description
0258-16
56342
2-Pocket Canvas String Apron
Hand Tools
2-Pocket Canvas Work Apron
SPECIFICATIONS
Dimensions
Weight
L - 19" (48.3 cm), H - 8-1/2" (21.6 cm)
.18 lbs. (.08 kg)
Description
0358-11XL
0358-11L
0358-11M
0358-11L-CP
56343
56344
89204
95932
Gloves, Mechanics XL
Gloves, Mechanics L
Gloves, Mechanics M
Gloves, Mechanics L Counter Pack (Qty 5)
Weight
= new product
= Replacement Part
= Accessory
.20 lbs. (.09 kg)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
39
INTERNATIONAL
UPC No.
CANADA
Cat. No.
USA
0358-11L
Tel: 800.435.0786
Fax: 800.524.2853
• Tough, soft and comfortable to wear – resists shrinking, stretching
and hardening.
• Wing closing wrist strap for perfect adjustments, keeping debris
out and easy-on/easy-off.
• Stretch fabric for flexibility and fit with padded knuckles.
• Textured palm pads for better grip, extra wear and added durability.
• Thumb design for better flexibility and Lycra side panels
for improved dexterity.
• Terry cloth thumb to remove sweat or debris from face.
Tel: 800.435.0786
Fax: 800.451.2632
High Dexterity Gloves
MADE FOR THE TRADE!™
tool Kits
Master Electrician’s Tool Kit
Hand Tools
0159-11
• All-inclusive tool kit designed with the master electrician in mind.
• Kit Includes: 18" Heavy-Duty Multi-pocket Bag, Heavy-Duty
8-Pocket Leather Pouch, 2" Leather Tool Belt, 9" Side-Cutting
Pliers, 8" Diagonal Cutting Pliers, 8" Long Nose Pliers,
10" Pump Pliers, Pro Plus Wire Stripper 10-18 AWG, NM Cable
Ripper, Stripping/Crimping Combination Tool, Cable Cutter, Utility
Knife, 12" Hacksaw, Keystone Tip Square Shank
1/4" x 4" Flat Blade Screwdriver, Keystone Tip Square Shank
5/16" x 6" Flat Blade Screwdriver, Cabinet Tip Round Shank
3/16" x 6" Flat Blade Screwdriver, Cabinet Tip Round Shank
1/4" x 6" Flat Blade Screwdriver, Phillips Tip #1 - 3/16" x 3"
Screwdriver, Phillips Tip #2 - 1/4" x 4" Screwdriver, Screwholding screwdriver 3/16" x 6", 3" Scratch Awl, 10" Adjustable
Wrench, 9-Piece Folding Hex-Key Set, 25' Tape Measure,
Torpedo Level, 18 oz. Electrician’s Hammer, High dexterity
gloves (L) and GT-11 Voltage tester.
• See individual product information for specifications.
Cat. No.
UPC No.
Description
0159-11
56349
Master Electrician’s Tool Kit, 28 pc
SPECIFICATIONS
Weight
19.7 lbs. (8.96 kg)
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Journeyman’s Tool Kit - Standard
0159-12
• Perfect kit for the journeyman electrician.
• Kit Includes: 20-Pocket Tool Caddy, GT-11 Voltage tester,
Torpedo Level, 18 oz. Electrician’s Hammer, 25' Tape Measure,
Keystone Tip Square Shank 1/4" x 4" Flat Blade Screwdriver,
Cabinet Tip Round Shank 3/16" x 6" Flat Blade Screwdriver,
Phillips Tip #1 - 3/16" x 3" Screwdriver, Phillips Tip #2 - 1/4"
x 4" Screwdriver, 9" Side-Cutting Pliers, 8" Diagonal Cutting
Pliers, 8" Long Nose Pliers, 10" Pump Pliers, Pro Plus Wire
Stripper 10-18 AWG, NM Cable Ripper, Stripping/Crimping
Combination Tool and Cable Cutter.
• See individual product information for specifications.
Cat. No.
UPC No.
Description
0159-12
56350
Journeyman’s Tool Kit, 17 pc
USA
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
40
Weight
9.7 lbs. (4.41 kg)
www.greenlee.com
Journeyman’s Tool Kit - Metric
0159-23
Cat. No.
UPC No.
Description
0159-23
89238
Journeyman’s Tool Kit, Metric 21pc
SPECIFICATIONS
Weight
Hand Tools
• Perfect kit for the journeyman electrician.
• Kit Includes: High Leverage Side-cutting pliers 9" molded grip, High Leverage
Diagonal Cutting Pliers 8" molded grip, High Leverage Long Nose Pliers/Side
Cutting 8" molded grip, Pump Pliers 10" molded grip, Dual NM Cable Ripper,
Heavy Duty Keystone Tip, Square Shank 1/4" x 4" Flat Blade Screwdriver,
Heavy Duty Cabinet Tip, Round Shank 3/16" x 6" Flat Blade Screwdriver,
Heavy Duty Phillips Tip #1 - 3/16" x 3" Screwdriver, Heavy Duty Phillips Tip
#2 - 1/4" x 4" Screwdriver, 7.5m/25' Tape measure, 18 oz. Electrician’s
Hammer, 20 Pocket Tool Caddy, Voltage tester (for kits only), Pro Plus Wire
Stripper 10-18 AWG, Stripping/Crimping Combination Tool, Cable Cutter,
Torpedo Level, 4 pc Squaredrive (Robertson) Set, Square Tip Driver #0X4",
Square Tip Driver #1X4", Square Tip Driver #2X4", Square Tip Driver #3X4"
• See individual product information for specifications.
13.7 lbs. (6.21 kg)
Electrician’s Tool Kit - Standard
Cat. No.
UPC No.
Description
0159-13
56351
Electrician’s Tool Kit - Standard, 12 pc
7.75 lbs. (3.52 kg)
Tel: 800.435.0786
Fax: 800.524.2853
Weight
= Replacement Part
= Accessory
41
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
SPECIFICATIONS
USA
0159-13
Tel: 800.435.0786
Fax: 800.451.2632
• Perfect kit for the professional or apprentice electrician.
• Kit Includes: 2" Leather Tool Belt, 8-Pocket Leather Pouch, 25' Tape
Measure, Phillips Tip #1 - 3/16" x 3" Screwdriver, Phillips Tip #2 - 1/4"
x 4" Screwdriver, Cabinet Tip Round Shank 3/16" x 6" Flat Blade
Screwdriver, Keystone Tip Square Shank 1/4" x 4" Flat Blade Screwdriver,
Pro Plus Wire Stripper 10-18 AWG, 8" Long Nose Pliers, 10" Pump Pliers,
8" Diagonal Cutting Pliers and 9" Side-Cutting Pliers.
• See individual product information for specifications.
MADE FOR THE TRADE!™
Electrician’s Tool Kit - Metric
• Perfect kit for the professional or apprentice electrician.
• Kit Includes: High Leverage Side-cutting pliers 9" molded grip, High
Leverage Diagonal Cutting Pliers 8" molded grip, High Leverage Long Nose
Pliers/Side Cutting 8" molded grip, Pump Pliers 10" molded grip, Heavy Duty
Keystone Tip, Square Shank 1/4" x 4" Flat Blade Screwdriver, Heavy Duty
Cabinet Tip, Round Shank 3/16" x 6" Flat Blade Screwdriver, Heavy Duty
Phillips Tip #1 - 3/16" x 3" Screwdriver, Heavy Duty Phillips Tip #2 -
1/4" x 4" Screwdriver, 7.5m/25' Tape measure, Heavy Duty 8 Pocket Leather
Pouch, Heavy Duty Leather Tool Belt, Pro Plus Wire Stripper 10-18 AWG,
4 pc Squaredrive (Robertson) Set, Square Tip Driver #0X4", Square Tip Driver
#1X4", Square Tip Driver #2X4", Square Tip Driver #3X4"
• See individual product information for specifications.
Hand Tools
0159-24
Cat. No.
UPC No.
Description
0159-24
89239
Electrician’s Tool Kit - Metric, 16 pc
SPECIFICATIONS
Weight
16.5 lbs. (7.5 kg)
Starter Electrician’s Tool Kit
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
0159-14
• Perfect kit for the beginner electrician.
• Four-pocket, heavy-duty, leather tool pouch holds an assortment of four
professional grade hand tools.
• Kit Includes: Heavy Duty 4 Pocket Leather Pouch, Phillips Tip #2 - 1/4" x 4"
Screwdriver, Cabinet Tip Round Shank 3/16" x 6" Flat Blade Screwdriver,
Pro Plus Wire Stripper 10-18 AWG and 9” Side-Cutting pliers.
• See individual product information for specifications.
Cat. No.
UPC No.
Description
0159-14
56352
Starter Electrician’s Tool Kit, 5 pc
SPECIFICATIONS
Weight
2.25 lbs. (1.02 kg)
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
Tel: 800.435.0786
Fax: 800.524.2853
Irrigation Tool Kit
42
0259-11
• Perfect kit for the irrigation professional.
• Kit Includes: High Leverage Side-cutting pliers 8" molded grip, 6-in-1 Multitool Screwdriver, 25' Tape measure, 18" Heavy-Duty Bag, 16" Dipped Pump
Pliers, HD Utility Knife, Shatterproof Hack Saw Blades, Heavy-Duty 12" Hack
Saw, Auto Select Digital Multimeter, Rocut 50 TC PVC Shears 1 -1/2, Pro Plus
Strippers 8-16 AWG
• See individual product information for specifications.
Cat. No.
UPC No.
Description
0259-11
89246
Irrigation Tool Kit - 11 pc
SPECIFICATIONS
Weight
15.6 lbs. (7.1 kg)
Holemaking
Year after year, Greenlee delivers holemaking products
that are second-to-none in the industry. And today,
we offer the most complete line of holemaking
solutions for getting through steel, stainless
steel, wood, aluminum, fiberglass, plastic,
drywall, cement board and more. For
holemaking...get through it
with Greenlee.
Contents
Slug-Splitter SC™ Knockout Punches/Kits
Slug-Buster® Knockouts/Kits
Standard Knockout Punches/Kits
Electric & Battery-Powered Knockout Kits
Hydraulic Knockout Kits
Knockout Parts Cabinets
C-Frame Punches
Special Application Punches
Draw Studs For Knockouts
Stud Punches
Drill/Taps
Step Bits
Auger Bits
D’Versibits & Accessories
Steel Hole Cutters
Hole Saws
Recessed Light Hole Saws
Saw Blades
Conduit Cutters
Hand Saws
Band Saws
Anchors & Fasteners
Masonry Bits
46
49
56
61
64
70
71
72
75
79
81
82
83
87
91
95
99
101
102
103
104
105
109
MADE FOR THE TRADE!™
MADE FOR THE TRADE!™
SELECTION GUIDES
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Holemaking
Holemaking Selection Guide
44
material Type
Material
Thickness
Number
of Holes
Steel
8GA
Stainless Steel
Wood
Aluminum
Fiberglass/Plastic
Drywall/Ceiling Tile
Quazite®* Enclosures
Hardyboard Siding
Cement Board
Existing Wall
Non-Round Hole
Non-Conduit Sizes
Metal Studs
10GA
10GA
10GA
10GA
High
10GA
10GA
10GA
9GA
8GA
18"
2–2 x 4’s
2 x 4
16"
1-5/8" or 2 x 4
10GA
10GA
10GA
10GA
10GA
10GA
approx. 1/8"
approx. 1/8"
approx. 1/8"
1-5/8"
7/8"
7/8"
7/8"
approx. 1/8"
Highest
Slug-Splitter SC Punches
High
Slug-Buster® Punches
High
Standard Punches
Medium-High
Ultra Cutters
Carbide-Tipped Hole Cutters
Medium-High
Step Bits
Medium
Hole Saws
Highest
Slug-Splitter SC™ Punches
Medium-High
Quick Change
Carbide-Tipped Cutters
Medium-High
Carbide-Tipped Hole Cutters
High
Nail Eater II® Bits
High
E-Z Bore® Bits
High
Step Bits
Medium
Spade Bits
High
Hole Saws
Highest
Slug-Splitter SC™ Punches
High
Slug-Buster® Punches
High
Standard Punches
High
Ultra Cutters
High
Step Bits
Medium
Hole Saws
Highest
Slug-Splitter SC™ Punches
High
Slug-Buster® Punches
High
Standard Punches
High
Ultra Cutters
Medium-High
Step Bits
Medium
Hole Saws
High
Recessed Light Hole Saws
Medium-Low
Quick Cutter
Medium
Keyhole Saw
High
Slug-Buster® Punches
High
Carbide-Grit Hole Saws
High
Carbide-Grit Hole Saws
High
Carbide-Grit Hole Saws
D’versibits®
High
Non-Round Punches
Medium
Reciprocating Blades
Medium
Jigsaw Blades
High
Standard Punches
Stud Punches
*Quazite is a registered trademark of Strongwell Corporation
16-10GA
20GA
ProductS
™
application Considerations
pages
Maximum durability and universal
material usage
Maximum hole size 2-1/2 inches
Maximum hole size 2-1/2 inches
Maximum hole size 5-5/8 inches
Maximum hole size 2-1/2 inches
Maximum hole size 2-1/2 inches
Maximum hole size 1-3/8 inches
Maximum hole size 6 inches
Maximum durability and universal
material usage
Maximum hole size 2-1/2 inches
Maximum hole size 3 inches, quick change
cutting heads
Maximum hole size 2-1/2 inches
Cuts through nails, good chip removal,
max hole size 1-1/4 inches
Self feed screw for hard or soft woods,
max hole size 4-5/8 inches
Maximum hole size 1-3/8 inches, low chip removal
Maximum hole size 1-1/2 inches
Maximum hole size 6 inches
Maximum durability and universal material usage
Maximum hole size 2-1/2 inches
Maximum hole size 2-1/2 inches
Maximum hole size 5-5/8 inches
Maximum hole size 2-1/2 inches
Maximum hole size 1-3/8 inches
Maximum hole size 6 inches
Maximum durability and universal material usage
Maximum hole size 2-1/2 inches
Maximum hole size 2-1/2 inches
Maximum hole size 5-5/8 inches
Maximum hole size 2-1/2 inches
Maximum hole size 1-3/8 inches
Maximum hole size 6 inches
Replaceable blades
Adjustable or fixed, sprinkler heads or lighting
Non-round holes
Remodeling, phone, cable, alarm installation
Square, rectangular, electronic connector holes
46-48
49-55
56-57
93
92
82
95-100
46-48
91
92
83
85
82
86
95-100
46-48
49-55
56-57
93
82
95-100
46-47
49-55
56-57
93
82
95-100
99
99
103
49-55
96
96
96
87-88
73-74
101
102
56-60
79-80
www.greenlee.com
Knockout Punch and Driver Selection Guide
Punch Type
Drive Method
Capacity
Slug-Splitter SC™
Ratchet, Hydraulic or Battery
Up thru 10 gauge (3.5 mm) .598" through 2.526" dia.
stainless steel or mild steel (15.2 mm through 64 mm)
Slug-Buster®
Manual, Ratchet,
Hydraulic or Battery
Up thru 10 gauge
(3.5 mm) mild steel
Standard Round
Manual, Ratchet,
Hydraulic or Battery
Up thru 10 gauge (3.5 mm) 1/2" through 5-5/8" dia.
mild steel and aluminum
(12.7 through 143.7 mm)
Knockout
Punch
Kits
Pages
Available in kits with driver only or with 61-63
driver and Slug-Buster® knockout
punches.
Available in kits with driver only
or with driver and either standard,
Slug-Buster® or Slug-Splitter SC™
knockout punches.
68
Available in kits with driver only or with 65
driver and either standard, Slug-Buster®
or Slug-Splitter SC™ knockout punches.
63
Available in kits with driver only or with 54
driver and Slug-Buster® knockout
punches.
45
INTERNATIONAL
Available in kits with driver only or with 63
driver and Slug-Buster® knockout
punches.
CANADA
Available in kits with driver only or with 63
driver and Slug-Buster® knockout
punches.
USA
= Accessory
56-60
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Replacement Part
.492" through 2.52" dia.
49-55
(12.5 mm through 64.0 mm)
Tel: 800.435.0786
Fax: 800.524.2853
= new product
Description
• Develops 6.7 tons of hydraulic force.
• Available with a choice of three battery chargers –
115, 230 or 12 volt.
• Punches up through 10 gauge (3.5 mm) mild steel
with Greenlee standard and Slug-Buster® knockout
punches and 12 gauge (2.5 mm) stainless steel with
Greenlee Slug-Splitter SC™ knockout punches.
• Powerful hydraulic ram develops 11 tons of
hydraulic force.
• Punches up thru 10 gauge (3.5 mm) mild steel with
Greenlee standard and Slug-Buster® knockout
punches and 10 gauge (3.5 mm) stainless steel with
Greenlee Slug-Splitter SC™ knockout punches.
• Foot operation frees both hands to operate punch.
• Powerful hydraulic ram develops 11 tons of
hydraulic force.
• Punches up through 10 gauge (3.5 mm) mild steel
with Greenlee Standard and Slug-Buster® knockout
punches and 10 gauge (3.5 mm) stainless steel with
Greenlee Slug-Splitter SC™ knockout punches.
• Allows unlimited driver orientation to simplify access
to work area.
• Develops 8 tons of hydraulic force for easy punching.
• Punches up through 10 gauge (3.5 mm) mild steel
with Greenlee Standard and Slug-Buster® knockout
punches and 10 gauge (3.5 mm) stainless steel with
Greenlee Slug-Splitter SC™ knockout punches.
• Right angle driver head rotates over 180 degrees for
maximum flexibility in tight working areas.
• Develops 8 tons of hydraulic force for easy punching.
• Punches up through 10 gauge (3.5 mm) mild steel
with Greenlee Standard and Slug-Buster® knockout
punches and 10 gauge (3.5 mm) stainless steel with
Greenlee Slug-Splitter SC™ knockout punches.
• Perfect for fast, straight-on front panel punching.
• Develops 8 tons of hydraulic force for easy punching.
• Punches up through 10 gauge (3.5 mm) mild steel
with Greenlee Standard and Slug-Buster® knockout
punches and 10 gauge (3.5 mm) stainless steel with
Greenlee Slug-Splitter SC™ knockout punches.
• Time saving ball bearing head punches faster than
wrench method.
• Punches up through 10 gauge (3.5 mm) mild steel
with Greenlee Standard Slug-Buster® knockout
punches and 16 gauge (1.5 mm) stainless steel with
Greenlee Slug-Splitter SC™ knockout punches.
46-48
Tel: 800.435.0786
Fax: 800.451.2632
Driver Type
Battery-Powered
or Corded
Hydraulic Driver
Hand Pump
Hydraulic Driver
with Ram
Foot Pump
Hydraulic Driver
with Ram
Quick Draw® Flex
Hydraulic Driver
Quick Draw 90®
Hydraulic Driver
Quick Draw®
Hydraulic Driver
High Leverage
Ratchet Driver
Pages
Holemaking
Knockout
Punch Driver
Size Range Available
MADE FOR THE TRADE!™
SLUG-SPLITTER SC™ KNOCKOUTS
Slug-Splitter SC™ (Self-Centering) Knockout Punches 0.598" to 2.520"
Holemaking
Designed for
stainless steel
applications
• Slug-Splitter SC™ heavy-duty punches are designed to punch up through 10
gauge (3.5 mm) stainless steel.
• Unique slug-splitting design and tool steel construction easily punch 10
gauge (3.5 mm) mild steel and stainless steel.
• Self-centering punch aligns itself on pilot hole. (Slug-Splitter SC™)
• No need to draw crosshairs or line up die alignment marks.
(Slug-Splitter SC™)
• Unique punch profile also splits slugs for easier slug removal.
• Heavy-duty dies and stainless steel draw studs for longer life.
• Excellent abrasion resistance for punching fiberglass and plastic.
• Slug-Splitter SC™punch units consist of: punch, die and draw stud.
Check individual punch for specific capacity.
• U.S. Patent No. 4,543,722 for standard Slug-Splitter; Patent Pending for
Self-centering Slug-Splitter SC™.
SPECIFICATIONS
Capacity
Application
Hole Sizes
Unique Slug-Splitter
SC™ punch design
creases slug as the
punch is drawn into
the die.
Slug is split in half as
punching operation is
completed.
Split slugs fall free
from the die and stud.
Stainless steel up through 10 gauge (3.5 mm)
10-gauge stainless steel, mild steel, fiberglass and plastic enclosures.
Conduit Sizes - Hole size is outside diameter of US conduit sizes.
Example: 1/2" conduit size actually makes a 7/8" hole.
Pg Sizes - European standard pipe sizes.
ISO Sizes - International Standards Organization pipe sizes.
Operate with battery, hydraulic or high leverage ratchet driver only.
Operation
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Slug-splitter sc™ (self centering) knockout punches
46
Punch
Cat./UPC No.
28154
28156
36490
28158
28160
28162
28165
Hole Size
Die
Conduit
Actual
Cat./UPC No. & Pipe
ø (inch)
ø (mm)
28155
1/2"
7/8
0.885
22.5
28157
3/4"
-
1.115
28.3
36489
-
1-7/32 1.210
30.5
28159
1"
1-11/32 1.352
34.6
28161
1-1/4" 1-11/16 1.701
43.2
28163
1-1/2" 1-15/16 1.951
49.6
28166
2"
2-3/8 2.416
61.5
Standard Slug-Splitter Knockout Punches
31117
31126
-
-
04599
04598
-
-
31119
31128
-
-
31120
31129
-
-
04602
04601
-
-
04605
04603
-
-
31122
31135
-
-
04608
04607
-
-
31123
31131
-
-
04611
04609
-
-
31124
31132
-
-
31125
31133
-
-
04614
04613
-
-
* 16 ga. stainless steel capacity with ratchet driver.
0.598
0.638
0.732
0.803
1.000
1.280
1.457
1.595
1.850
2.000
2.125
2.362
2.520
15.2
16.2
18.6
20.4
25.4
32.5
37.0
40.5
47.0
50.8
54.0
60.0
64.0
Pg
16
21
-
-
-
-
-
ISO
-
-
-
-
-
-
-
9
-
11
13
-
-
29
-
36
-
42
48
-
-
16
-
20
25
32
-
40
-
50
-
-
63
Capacity
Draw Studs
Stainless Steel Hydraulic Drivers Ratchet Driver*
GA.
(mm) 7804/7904 7646/7625
1904
10
3.5
29451
29451
30227
10
3.5
31872
29452
12099
10
3.5
31872
29452
12099
10
3.5
31872
29452
12099
10
3.5
31872
29452
12099
10
3.5
-
29452
12099
10
3.5
-
29452
12099
12
12
12
12
10
10
10
10
10
10
10
10
10
2.5
2.5
2.5
2.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
29451
29451
29451
29451
31872
31872
31872
31872
-
-
-
-
-
29451
29451
29451
29451
29452
29452
29452
29452
29452
29452
29452
29452
29452
30227
30227
30227
30227
30227
12099
12099
12099
12099
12099
12099
12099
12099
www.greenlee.com
Punch Unit
Punch Unit - Includes
Punch, Die & Draw
Catalog No.
UPC No
Capacity
Stainless Steel
Hole Size
Conduit and
Pipe Size
ø inch
ø mm
GA
mm
Driver
Weight
LBS.
kg
1904
x
7804/7904
LS60*
7646/7625
Draw
Stud
30384
1/2"
7/8
22.5
16
1.5
.6
.27
29560
29563
1/2"
7/8
22.5
10
3.5
.7
.32
x
x
x
29451
30227
-
1-7/32
30.5
10
3.5
1.2
.54
x
x
x
29452
12318
3/4"
1-3/32
28.3
10
3.5
1.26
.57
x
29452
745H-1
12319
1"
1-11/32
34.6
10
3.5
1.51
.68
x
29452
745H-1-1/4
12320
1-1/4"
1-11/16
43.2
10
3.5
1.96
.89
x
29452
745H-1-1/2
12321
1-1/2"
1-15/16
49.6
10
3.5
2.49
1.13
x
29452
745H-2
12322
2"
2-3/8
61.5
10
3.5
3.69
1.67
x
29452
745M-15.2
12323
-
0.598
15.2
12
2.5
.98
.44
x
29451
745M-16.2
12324
-
0.638
16.2
12
2.5
.97
.44
x
29451
745M-18.6
12325
-
0.732
18.6
12
2.5
.98
.45
x
29451
745M-20.4
12326
-
0.803
20.4
12
2.5
.96
.44
x
29451
745M-25.4
12317
-
1.000
25.4
10
3.5
1.05
.48
x
29451
745M-32.5
12327
-
1.280
32.5
10
3.5
1.53
.69
x
29452
745M-37
12328
-
1.457
37
10
3.5
1.68
.76
x
29452
745M-40.5
12329
-
1.595
40.5
10
3.5
1.83
.83
x
29452
745M-47
12330
-
1.850
47
10
3.5
2.3
1.04
x
29452
745M-50.8
12331
-
2.000
50.8
10
3.5
2.91
1.32
x
29452
-
2.125
54
10
3.5
2.90
1.31
x
29452
-
2.362
60
10
3.5
3.63
1.65
x
29452
745M-64
12334
-
2.520
64
10
3.5
3.87
1.75
x
29452
* Battery-Powered or Corded Knockout Punch Driver
= Accessory
47
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Replacement Part
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
= new product
USA
12332
12333
Tel: 800.435.0786
Fax: 800.451.2632
745M-54
745M-60
Holemaking
745R-1/2
745H-1/2
740H-1-7/32
Oil Tight
745H-3/4
MADE FOR THE TRADE!™
SLUG-SPLITTER SC™ KNOCKOUT KITS
Slug-Splitter SC™ Ram and Hand Pump Hydraulic Driver Punch Kits
7506 Punch Kit
Holemaking
Designed for
stainless steel
applications
All Kits Feature:
• Slug-Splitter SC™ (Self Centering) knockout punches with capacities up through 10
gauge (3.5 mm) stainless steel. Refer to individual punch capacity ratings.
• Self-centering punch aligns itself on pilot hole. (Slug-Splitter SC™)
• No need to draw crosshairs or line up die alignment marks. (Slug-Splitter SC™)
7506 Kit Features
• Fast, easy and simple to operate.
• Compact design makes this a perfect choice for use on construction sites and
maintenance jobs.
• Will also drive 751 Cable Cutter head.
• Powerful 11-ton hydraulic ram.
• 3-foot hose.
7307 Punch Kit
(driver not included)
Cat. No.
744
7307
7506
UPC No.
29619
29528
30385
Weight
Description
lbs. kg.
1/2" through 1-1/4" Conduit Size Slug-Splitter SC ™
Knockout Punch Kit
5
2.3
1/2" through 2" Conduit Size Slug-Splitter SC™
Knockout Punch Kit
10.4 4.7
1/2" through 2" Conduit Size Slug-Splitter SC™
Knockout Punch Kit with Hydraulic Ram
and Hand Pump
32
14.5
SPECIFICATIONS
Operation
744 Punch Kit
(driver not included)
7307/29528 - Quick Draw®, Quick Draw 90® and Quick Draw® Flex
Hydraulic Drivers, Battery-Powered Drivers, 7646 and 7625 Ram-Type
Drivers.
744/29619 - Quick Draw®, Quick Draw 90® and Quick Draw® Flex Hydraulic
Drivers, Battery-Powered Drivers, 7646 and 7625 Ram-Type Drivers.
7506/30385 - Hydraulic Ram and Hand Pump included.
48
Punches and Dies
Draw Studs and Misc.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
NOTE: See Slug-Splitter SC™ knockout punch units on page 46 for list of individual punches, dies and draw studs.
Cat. No.
28154
28155
28156
28157
36490
36489
28158
28159
28160
28161
28162
28163
28165
28166
29451
29452
29529
19193
31068
746SS
54167
54168
15908
1924AA
1925AA
1926AA
767
38316
54169
54170
06302
Hole Size
Conduit &
Actual
UPC No. Description
Pipe Size
ø inch
ø mm
28154
1/2" Conduit Size Punch
1/2"
7/8
.885
22.5
28155
1/2" Conduit Size Die
1/2"
7/8
.885
22.5
28156
3/4" Conduit Size Punch
3/4"
—
1.115
28.3
28157
3/4" Conduit Size Die
3/4"
—
1.115
28.3
36490
1-7/32" Punch Oiltight
—
1-7/32
1.210
30.5
36489
1-7/32" Die Oiltight
—
1-7/32
1.210
30.5
28158
1" Conduit Size Punch
1"
1-11/32
1.362
34.6
28159
1" Conduit Size Die
1"
1-11/32
1.362
34.6
28160
1-1/4" Conduit Size Punch
1-1/4"
1-11/16
1.701
43.2
28161
1-1/4" Conduit Size Die
1-1/4"
1-11/16
1.701
43.2
28162
1-1/2" Conduit Size Punch
1-1/2"
1-15/16
1.951
49.6
28163
1-1/2" Conduit Size Die
1-1/2"
1-15/16
1.951
49.6
28165
2" Conduit Size Punch
2"
2-3/8
2.416
61.5
28166
2" Conduit Size Die
2"
2-3/8
2.416
61.5
29451
7/16" x 4-1/4" Draw Stud
29452
3/4" x 5-1/2" Draw Stud
29529
Metal Case
19193
Metal Case
31068
Metal Case
30387
Ram (includes 1 each of the following 3 items)
54167
1/4" Female Coupler
54168
Dust Plug
15908
Spacer Group (includes 1 each of the following 3 items)
03248
Spacer-Short
03249
Spacer-Medium
06904
Spacer-Long
13284
Hydraulic Hand Pump
38316
High Pressure Hose Unit–1/4" x 3' (includes 1 each of the following 3 items)
54169
1/4" Male Coupler
54170
Dust Cap
06302
High Pressure Hose–1/4" x 3'
Capacity
Kit Cat./UPC No.
Stainless Steel 744/
7307/ 7506/
GA
mm
29619 29528 30385
10
3.5
✓
✓
✓
10
3.5
✓
✓
✓
10
3.5
✓
✓
✓
10
3.5
✓
✓
✓
10
3.5
✓
10
3.5
✓
10
3.5
✓
✓
✓
10
3.5
✓
✓
✓
10
3.5
✓
✓
✓
10
3.5
✓
✓
✓
10
3.5
✓
✓
10
3.5
✓
✓
10
3.5
✓
✓
10
3.5
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
www.greenlee.com
SLUG-BUSTER® KNOCKOUTS
Slug-Buster SC® (Self-Centering)
• Save time and ensure accuracy! Self-centering punch aligns itself on pilot hole.
• No need to draw crosshairs or line up die alignment marks.
• Unique punch also splits slugs for easier slug removal.
• US Patent No. 6,973,729
Holemaking
®
weight of
punch unit
lbs.
g
0.3
137
0.8
363
0.9
408
1
454
1.3
590
2.1
953
2.3
1043
-
-
Punch only
cat no.
upc
77P-1/2
11361
77P-1/2P*
11261
77P-3/4
11362
77-3/4P*
11262
11357
11357
77P-1
11363
77P-1P*
11263
77P-1-1/4
11364
77P-1-1/4P* 11264
77P-1-1/2
11365
77P-1-1/2P* 11265
77P-2
11366
77P-2P*
11266
-
-
*POP Packaged
10800 Slug-Buster SC® Knockout Kit Includes
Hole sizes
1/2"
1/2"
3/4"
3/4"
.885
.885
1.115
1.115
77P-1
126AV
77P-1-1/4
128AV
77P-1-1/2
440AV
77P-2
442AV
11363
04011
11364
04013
11365
04061
11366
04063
1" Punch Buster, SC
1" Die Rd.
1-1/4" Punch Buster, SC
1-1/4" Die Rd.
1-1/2" Punch Buster, SC
1-1/2" Die Rd.
2" Punch Buster, SC
2" Die Rd.
1"
1"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
2"
2"
1.362
1.362
1.701
1.701
1.951
1.951
2.416
2.416
= Replacement Part
= Accessory
49
INTERNATIONAL
Conduit Size
1/2" Punch Buster, SC
1/2" Die Rd.
3/4" Punch Buster, SC
3/4" Die Rd.
CANADA
description
11361
14722
11362
06972
Tel: +1.815.397.7070
Fax: +1.815.397.9247
upc no.
77P-1/2
14722
77P-3/4
124AV
stud only
cat no.
upc
00042
00042
00042
00042
249AVBB
04040
249AVBBP* 01987
249AVBB
04040
294AVBB
04040
249AVBBP
01987
249AVBB
04040
249AVBBP* 01987
304AVBB
04042
304AVBBP* 01988
304AVBB
04042
304AVBBP* 01988
-
-
Tel: 800.435.0786
Fax: 800.524.2853
cat no.
= new product
die only
cat no.
upc
14722
14722
14722P*
01992
124AV
06972
124AVP*
01993
36278
36278
126AV
04011
126AVP*
01994
128AV
04013
128AVP*
01995
440AV
04061
440AVP*
01996
442AV
04063
442AVP*
01997
-
-
USA
Hole sizes
inch
mm
.885
22.2
1.115
28.3
1.21
30.5
1.362
34.6
1.701
43.2
1.951
49.6
2.416
61.4
-
-
Tel: 800.435.0786
Fax: 800.451.2632
Conduit &
Punch Unit
Pipe Size
cat no.
upc
77U-1/2*
10801
1/2"
77U-3/4*
10802
3/4"
10807*
10807
-
77U-1*
10803
1"
77U-1-1/4* 10804
1-1/4*
77U-1-1/2* 10805
1-1/2"
77U-2*
10806
2"
10800
10800 1/2"-2" Kit
MADE FOR THE TRADE!™
Slug-Buster® Knockout Punches 0.492" to 2.520"
• The contractor’s choice – worldwide.
• Unique punch profile also splits slugs for easier slug removal.
• Use with battery-powered, hydraulic, ratchet or manual drivers.
• Uses standard Greenlee dies and draw studs.
• Slug Buster® punches available in sizes up thru 2.52" (64.0 mm).
• U.S.Patent #4,543,722 for Slug-Buster®.
Holemaking
SPECIFICATIONS
Capacity
Application
Hole Sizes
Unique Slug-Buster®
punch design creases
slug as the punch is
drawn into the die.
Punch Unit
Punch Unit includes
Punch, Die and Draw Stud Conduit &
CANADA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
06727
12356
12357
7211EBB-15.2
35177
12335
7211EBB-18.6
12307
7211EBB-20.4
7211BB-1/2
12338
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
Cat. No.
p
35178
12341
7211BB-3/4
p
7211EBB-28.3
60246
36508
12308
35179
12344
7211BB-1
p
12304
7211EBB-37
12313
35180
12347
7211BB-1-1/4
12316
USA
Tel: 800.435.0786
Fax: 800.451.2632
p
7211EBB-47
12350
7211BB-1-1/2
p
35181
36171
12351
7211EBB-60
7211BB-2
p
35182
50
UPC No.
Pipe Size
06727
12356
12357
31989
35177
12335
31990
12307
31991
31962
12338
p
35178
12341
31963
p
31993
60246
36508
12308
35179
12344
31964
p
12304
31995
12313
35180
12347
31965
12316
p
31996
12350
31966
p
35181
36171
12351
31998
31967
p
35182
—
—
—
—
—
—
—
—
—
1/2"
—
1/2"
—
—
3/4"
3/4"
—
—
—
—
—
—
1"
1”
—
—
—
—
—
1-1/4"
—
1-1/4"
—
—
1-1/2"
1-1/2"
—
—
—
—
2"
2"
—
Operation
Split slugs fall free from
the die and stud.
Slug is split in half as
punching operation is
completed.
Hole Size
Actual
ø inch
ø mm
—
0.492 12.5
1/2
—
12.7
9/16
—
14.3
—
0.598 15.2
—
0.638 16.2
11/16
—
17.5
—
0.732 18.6
3/4
—
19.1
—
0.803 20.4
7/8 0.885 22.5
15/16
—
23.8
7/8 0.885 22.5
1
1.000 25.4
1-1/16 —
27
—
1.115 28.3
—
1.115 28.3
—
1.115 28.3
1-7/32 1.210 30.5
1-7/32 1.210 30.5
1-1/4
—
31.8
—
1.280 32.5
1-5/16 —
33.4
— 1.362 34.6
—
1.362 34.6
1-3/8
—
34.9
—
1.457 37.0
1-1/2
—
38.1
—
1.595 40.5
1-5/8
—
41.3
—
1.701 43.2
1-3/4
—
44.5
—
1.701 43.2
—
1.850 47.0
1-7/8
—
47.6
—
1.951 49.6
—
1.951 49.6
2
2.000 50.8
2-1/8 2.125 54.0
2-1/4
—
57.2
—
2.362 60.0
2-3/8 2.416 61.5
2-3/8 2.416 61.5
—
2.520 64.0
pIndividually Packaged in Point of Purchase clamshell for display opportunities
Capacity
Mild Steel
Pg
7
7
—
9
—
—
11
—
13
16
—
16
—
—
—
—
21
—
—
—
—
—
—
10
—
29
—
—
—
—
—
—
36
—
—
—
—
42
—
48
—
—
—
ISO
12
—
—
—
16
—
—
—
20
—
—
—
25
—
—
—
—
—
—
—
32
—
—
—
—
—
—
40
—
—
—
—
—
—
—
—
50
—
—
—
—
—
63
GA.
16
16
16
14
14
14
14
14
14
10
14
10
14
14
10
10
14
10
14
16
10
16
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
mm
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
3.5
2.0
3.5
2.0
2.0
3.5
3.5
2.0
3.5
2.0
1.5
3.5
1.5
3.5
3.5
3.0
3.5
3.0
3.5
3.0
3.5
3.0
3.5
3.5
3.0
3.5
3.5
3.5
3.5
3.0
3.5
3.5
3.5
3.5
Weight
lbs.
0.3
0.15
0.16
0.3
0.3
0.3
0.3
0.4
0.3
0.3
0.5
—
0.5
0.6
0.8
—
0.5
0.6
0.6
0.7
0.8
0.7
1
—
1.1
1.2
1.2
1.2
1.3
1.3
1.4
—
1.9
1.8
2.1
—
2.3
2.5
2.9
2.8
3.2
—
3.4
Mild steel up through 10 gauge (3.5 mm).
Punch mild steel, aluminum, fiberglass and plastic.
Conduit Sizes- Hole size is outside diameter of US conduit sizes. i.e 1/2"
conduit actually 7/8".
Pg Sizes-European standard pipe sizes.
ISO Sizes- International Standards Organization pipe sizes.
Battery, hydraulic, ratchet or manual drivers. When used with ratchet,
hydraulic or battery drivers, buy the punch and die only; the draw stud is
part of the driver kit.
REPLACEMENT PARTS
Replacement Punch
Cat. No.
g
137
06728
69
12360
73.5
12357
137
31969
137
35163
177
12337
137
31970
183
12306
137
31971
137
721-1/2
253
12340
—
721-1/2Pp
227
35165
261
12343
363
721-3/4
—
721-3/4Pp
227
31973
273
60237
273
36284
326.5
12309
363
35169
345
12346
454
721-1
—
721-1Pp
507.5
12303
545
31975
559
12312
545
35158
610.25
12349
590
721-1-1/4
661.5
12315
— 721-1-1/4Pp
862
31976
853.5
12354
953
721-1-1/2
—
721-1-1/2Pp
1043
35160
1134
36172
1336
12355
1270
31978
1452
721-2
—
721-2Pp
1542
35167
Replacement Die
Replacement
Manual Draw Stud
UPC No.
Cat. No.
UPC No.
Cat. No.
UPC No.
06728
12360
12357
31969
35163
12337
31970
12306
31971
31756
12340
01980
35165
12343
31757
01981
31973
60237
36284
12309
35169
12346
31758
01982
12303
31975
12312
35158
12349
31759
12315
01983
31976
12354
31760
01984
35160
36172
12355
31978
31761
01985
35167
06729
12358
12361
32002
35162
12336
32003
12305
32004
14722
12339
14722Pp
35164
12342
124AV
124AVPp
32006
36278
36279
12310
35168
12345
126AV
126AVPp
12302
32008
12311
35159
12348
128AV
12314
128AVPp
32009
12352
440AV
440AVPp
35161
36173
12353
32011
442AV
442AVPp
35166
06729
12358
12361
32002
35162
12336
32003
12305
32004
14722
12339
01992
35164
12342
06972
01993
32006
36278
36279
12310
35168
12345
04011
01994
12302
32008
12311
35159
12348
04013
12314
01995
32009
12352
04061
01996
35161
36173
12353
32011
04063
01997
35166
1675AV
1675AV
1675AV
00042
00042
00042
00042
00042
00042
00042
00042
00042P
00042P
00042
249AVBB
249AVBBPp
00042
249AVBB
00042
00042
249AVBB
00042
249AVBB
249AVBBPp
04040
249AVBB
04040
249AVBB
04040
249AVBB
04040
249AVBBPp
304AVBB
04042
304AVBB
304AVBBPp
304AVBB
304AVBB
04042
304AVBB
304AVBB
304AVBBPp
304AVBB
04218
04218
04218
00042
00042
00042
00042
00042
00042
00042
00042
06678
06678
00042
04040
01987
00042
04040
00042
00042
04040
00042
04040
01987
04040
04040
04040
04040
04040
04040
04040
01987
04042
04042
04042
01988
04042
04042
04042
04042
04042
01988
04042
www.greenlee.com
SLUG-BUSTER® KNOCKOUT KITS
Slug-Buster® Manual Knockout Kits
Cat. No. UPC No.
7235BB
Description
Capacity
Mild Steel Weight
GA mm lbs. kg.
7235BB 32013
1 /2" - 1-1/4" Conduit Size Manual 10
Slug-Buster® Knockout Punch Kit
3.5
2.7 1.2
7237BB 32014
1 -1/2" and 2" Conduit Size Manual 10
Slug-Buster® Knockout Punch Kit
3.5
5.2 2.4
• Assortment of commonly used Slug-Buster® knockout
punches, packaged to meet the contractor’s needs.
• High-impact, rugged plastic carrying case.
Cat. No.
721-1/2
14722
00042
UPC No.
31756
14722
00042
721-3/4
124AV
721-1
126AV
721–1-1/4
128AV
31757
06972
31758
04011
31759
04013
249AVBB
31880
04040
31880
Description
1/2" Conduit Size Punch
1/2" Conduit Size Die
Draw Stud–3/8" x 1-5/8"
3/4" Conduit Size Punch
3/4" Conduit Size Die
1" Conduit Size Punch
1" Conduit Size Die
1-1/4" Conduit Size Punch
1-1/4" Conduit Size Die
Draw Stud–3/4" x 2-1/8"
Plastic Case
Hole Size Actual
ø inch ø mm Pg
7/8 .885 22.5 16
7/8 .885 22.5 16
—
—
—
—
—
—
1.115 28.3 —
1.115 28.3 —
1.362 34.6 —
1.362 34.6 —
1.701 43.2 —
Holemaking
7235BB/32013 Slug-Buster® Knockout Punch Kit Includes
1.701 43.2 —
7237BB/32014 Slug-Buster® Knockout Punch Kit Includes
7237BB
32012
32012
Description
1-1/2" Conduit Size Punch
1-1/2" Conduit Size Die
2" Conduit Size Punch
2" Conduit Size Die
Draw Stud–3/4" x 2-15/16"
Plastic Case
Hole Size Actual
ø inch ø mm Pg
— 1.951 49.6 —
— 1.951 49.6 —
2-3/8 2.416 61.5 —
2-3/8 2.416 61.5 —
= Accessory
51
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Replacement Part
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
= new product
USA
UPC No.
31760
04061
31761
04063
04042
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
721-1-1/2
440AV
721-2
442AV
304AVBB
MADE FOR THE TRADE!™
Slug-Buster® Ratchet Punch Driver Kits
• Time-saving ball bearing head punches faster than wrench method.
• Requires less than half the force of conventional ratchet drivers.
• Punches up through 10 gauge (3.5 mm) mild steel with Greenlee Standard
and Slug-Buster® punches; and 16 gauge (1.5 mm) stainless steel with
Greenlee Slug-Splitter SC™ punches.
• Ratchet action allows for use in confined areas.
• Unique design eliminates stud rotation during punching – lowers the
strain on studs.
• Steel carrying case.
1904
Holemaking
Cat. No. UPC No. Description
Basic High Leverage Ratchet Driver with Three
Draw Studs and Case
14 6.4
1906SB
34357
High Leverage Ratchet Driver with 1/2"
through 2" Slug-Buster® Conduit Size Punches,
Dies, Draw Studs and Case
20 9.1
Hole Size
Conduit
& Pipe
Size
Kit Cat./UPC No.
ø mm
0.885
22.5
10
3.5
✓
0.885
22.5
10
3.5
✓
—
1.115
28.3
10
3.5
✓
3/4"
—
1.115
28.3
10
3.5
✓
1" Conduit Size Slug-Buster Punch
1"
—
1.362
34.6
10
3.5
✓
1" Conduit Size Die
1"
—
1.362
34.6
10
3.5
✓
1-1/4" Conduit Size Slug-Buster® Punch
1-1/4"
1-11/16
1.701
43.2
10
3.5
✓
04013
1-1/4" Conduit Size Die
1-1/4"
1-11/16
1.701
43.2
10
3.5
✓
721-1-1/2
31760
1-1/2" Conduit Size Slug-Buster Punch
1-1/2"
1-15/16
1.951
49.6
10 *
3.5
✓
440AV
04061
1-1/2" Conduit Size Die
1-1/2"
1-15/16
1.951
49.6
10 *
3.5
✓
721-2
31761
2" Conduit Size Slug-Buster® Punch
2"
2-3/8
2.416
61.5
10 *
3.5
✓
442AV
04063
2" Conduit Size Die
2"
2-3/8
2.416
61.5
10 *
3.5
✓
12097
12097
Draw Stud – 3/8" x 3 1/2"
✓
✓
12099
12099
Draw Stud – 3/4" x 4-3/4"
✓
✓
30227
30227
Draw Stud – 7/16" x 3-5/8"
✓
30228
30228
Steel Case
✓
✓
20495
20495
Ratchet wrench only
✓
✓
30225
30225
Handle
✓
✓
Actual
ø inch
UPC No. Description
721-1/2
31756
1/2" Conduit Size Slug-Buster® Punch
1/2"
7/8
14722
14722
1/2" Conduit Size Die
1/2"
7/8
721-3/4
31757
3/4" Conduit Size Slug-Buster® Punch
3/4"
124AV
06972
3/4" Conduit Size Die
721-1
31758
126AV
04011
721-1-1/4
31759
128AV
Punches and Dies
Cat. No.
Draw Studs
and Misc.
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
30216
Tel: 800.435.0786
Fax: 800.451.2632
1904
Capacity
Mild Steel
GA
mm
52
Weight
lbs. kg.
®
®
1904/ 1906SB/
30216 34357
www.greenlee.com
Slug-Buster® Knockout Kit with Ratchet Wrench
Cat. No.
7238SB
UPC No. Description
34757 1/2" – 2" Conduit Size
Slug-Buster® Knockout Punch Kit
Capacity
Mild Steel Weight
GA mm lbs. kg.
10
3.5
10 4.54
7238SB/34757 Slug-Buster® Knockout Punch Kit Includes
UPC No.
34941
31756
14722
31757
06972
31758
04011
31759
04013
31760
04061
31761
04063
00042
04042
34758
Hole Size Actual
Description
ø inch
ø mm
Ratchet wrench – 1" Hex
1/2" Conduit Size Punch
7/8 .885
22.5
1/2" Conduit Size Die
7/8 .885
22.5
3/4" Conduit Size Punch
— 1.115
28.3
3/4" Conduit Size Die
— 1.115
28.3
1" Conduit Size Punch
— 1.362
34.6
1" Conduit Size Die
— 1.362
34.6
1-1/4" Conduit Size Punch — 1.701
43.2
1-1/4" Conduit Size Die
43.2
— 1.701
1-1/2" Conduit Size Punch — 1.951
49.6
1-1/2" Conduit Size Die
49.6
— 1.951
2" Conduit Size Punch
61.5
2-3/8 2.416
2" Conduit Size Die
61.5
2-3/8 2.416
Ball Bearing Draw Stud
with 1" Hex Head–3/8" x 1-5/8"
Ball Bearing Draw Stud–3/4" x 2-15/16"
Plastic Case
Pg
16
16
—
—
—
—
—
—
—
—
—
—
Holemaking
• 1" Hex Ratchet Wrench allows use with both 3/8" (9.5 mm)
and 3/4" (19.1 mm) draw studs.
• High-impact, rugged plastic carrying case.
Cat. No.
34941
721-1/2
14722
721-3/4
124AV
721-1
126AV
721-1-1/4
128AV
721-1-1/2
440AV
721-2
442AV
00042
304AVBB
34758
53
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Accessory
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
= Replacement Part
USA
Tel: 800.435.0786
Fax: 800.451.2632
= new product
MADE FOR THE TRADE!™
Slug-Buster® Knockout Kit with Ratchet Wrench - Metric
• 1" (25.4 mm) hex ratchet wrench allows use with both 3/8" (9.5 mm) and
3/4" (19.1 mm) draw studs.
• 3/8" (9.7 mm) Kwik Stepper® step bit included.
• High-impact, rugged plastic carrying case.
54
Cat. No.
36690
36691
36692
UPC No.
36690
36691
36692
Weight
Description
lbs. kg.
Pg-9 through 30.5 mm Manual Slug-Buster®
Metric Knockout Punch Kit
4.7 2.1
Pg-9 through Pg-48 and 30.5 mm
Manual Slug-Buster® Metric Knockout Punch Kit 9
4.1
ISO-16 through ISO-40 Manual Slug-Buster®
Metric Knockout Punch Kit
5.6 2.5
36693
36693
ISO-16 through ISO-63 Manual Slug-Buster®
Metric Knockout Punch Kit
Hole Size
Actual
ø mm
ø inch
ISO
4.1
Capacity
Kit Cat./UPC No.
Mild Steel
mm 36690 36691 36692 36693
GA
Cat. No. UPC No.
Description
31969
31969
Slug-Buster® Punch
—
0.598
15.2
9
—
14
2.0
✓
✓
32002
32002
Die
—
0.598
15.2
9
—
14
2.0
✓
✓
31970
31970
Slug-Buster® Punch
—
0.732
18.6
11
—
14
2.0
✓
✓
32003
32003
Die
—
0.732
18.6
11
—
14
2.0
✓
✓
31971
31971
Slug-Buster® Punch
—
0.803
20.4
13
20
14
2.0
✓
✓
✓
✓
32004
32004
Die
—
0.803
20.4
13
20
14
2.0
✓
✓
✓
✓
721-1/2
31756
Slug-Buster Punch
7/8
0.885
22.5
16
—
10
3.5
✓
✓
14722
14722
Die
7/8
0.885
22.5
16
—
10
3.5
✓
✓
31973
31973
Slug-Buster® Punch
—
1.115
28.3
21
—
14
2.0
✓
✓
32006
32006
Die
—
1.115
28.3
21
—
14
2.0
✓
✓
®
Pg
9
36284
36284
30.5 mm Slug-Buster Punch
1-7/32 1.210
30.5
—
—
14
2.0
✓
✓
36279
36279
30.5 mm Die
1-7/32 1.210
30.5
—
—
14
2.0
✓
✓
31975
31975
Slug-Buster® Punch
—
1.457
37.0
29
—
10
3.5
✓
32008
32008
Die
—
1.457
37.0
29
—
10
3.5
✓
✓
Punches and Dies
®
31976
31976
Slug-Buster Punch
—
1.850
47.0
36
—
10
3.5
32009
32009
Die
—
1.850
47.0
36
—
10
3.5
✓
31978
31978
Slug-Buster® Punch
—
2.362
60.0
48
—
10
3.5
✓
32011
32011
Die
—
2.362
60.0
48
—
10
3.5
✓
35163
35163
ISO-16 Slug-Buster Punch
—
0.638
16.2
—
16
14
2.0
✓
✓
35162
35162
ISO-16 Die
—
0.638
16.2
—
16
14
2.0
✓
✓
35165
35165
ISO-25 Slug-Buster® Punch
1
1.000
25.4
—
25
14
2.0
✓
✓
35164
35164
ISO-25 Die
1
1.000
25.4
—
25
14
2.0
✓
✓
®
®
35169
35169
ISO-32 Slug-Buster Punch
—
1.280
32.5
—
32
10
3.5
✓
✓
35168
35168
ISO-32 Die
—
1.280
32.5
—
32
10
3.5
✓
✓
35158
35158
ISO-40 Slug-Buster® Punch
—
1.595
40.5
—
40
10
3.5
✓
✓
35159
35159
ISO-40 Die
—
1.595
40.5
—
40
10
3.5
✓
✓
®
35160
35160
ISO-50 Slug-Buster Punch
2
2.000
50.8
—
50
10
3.5
✓
35161
35161
ISO-50 Die
2
2.000
50.8
—
50
10
3.5
✓
35167
35167
ISO-63 Slug-Buster® Punch
2-1/2
2.500
63.5
—
63
10
3.5
✓
35166
35166
ISO-63 Die
2-1/2
2.500
63.5
—
63
10
3.5
✓
✓
®
249AVBB 04040
Draw Stud – 3/4" x 2-1/8"
304AVBB 04042
Draw Stud – 3/4" x 2-15/16"
✓
✓
36018
36018
Kwik Stepper® Step Bit 9.7 mm
✓
✓
✓
✓
34941
34941
Ratchet Wrench – 1" Hex
✓
✓
✓
✓
00042
00042
Ball Bearing Drive Nut with 1" Hex Head, 3/8" x 3"
✓
✓
✓
✓
36685
36685
Plastic Case
✓
✓
✓
✓
Draw Studs
and Misc.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Holemaking
36690
www.greenlee.com
Slug-Buster® Knockout Punch Kits for Ratchet/Hydraulic Drivers
• Packaged in carton for easy insertion into your existing case.
• Replacement punch kits for battery-powered, hydraulic and ratchet drivers.
Cat. No. UPC No. Description
1/2"
1/2"
3/4"
3/4"
1"
1"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
2"
2"
Punch
Die
Punch
Die
Punch
Die
ISO-16 Punch
ISO-16 Die
ISO-25 Punch
ISO-25 Die
ISO-32 Punch
ISO-32 Die
ISO-40 Punch
ISO-40 Die
ISO-50 Punch
ISO-50 Die
ISO-63 Punch
ISO-63 Die
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
= Replacement Part
= Accessory
32803
Pg-9 through Pg-48 and 30.5 mm Slug-Buster
Pg Punch Kit
5.1 2.3
35617
35617
ISO-16 through ISO-40 Slug-Buster® ISO Punch Kit 1.6 .7
06892
06892
ISO-16 through ISO-63 Slug-Buster ® ISO Punch Kit 5.5 2.5
Hole Size
Actual
ø inch
ø mm
.885
.885
22.5
22.5
1.115
1.115
1.362
1.362
— 1.701
— 1.701
— 1.951
— 1.951
2-3/8 2.416
2-3/8 2.416
— .598
— .598
— .732
— .732
— .803
— .803
— 1.115
— 1.115
1-7/32 1.210
1-7/32 1.210
— 1.457
— 1.457
— 1.850
— 1.850
— 2.362
— 2.362
— 0.638
— 0.638
1
1.000
1
1.000
— 1.280
— 1.280
— 1.595
— 1.595
2
2.000
2
2.000
— 2.520
— 2.520
28.3
28.3
34.6
34.6
43.2
43.2
49.6
49.6
61.5
61.5
15.2
15.2
18.6
18.6
20.4
20.4
7/8
7/8
—
—
—
—
28.3
28.3
30.5
30.5
37.0
37.0
47.0
47.0
60.0
60.0
16.2
16.2
25.4
25.4
32.5
32.5
40.5
40.5
50.8
50.8
64.0
64.0
Pg
Capacity-
Kit Cat./UPC No.
Mild Steel 7216/ 7214E/ 7215E/
ISO GA mm 32017 32398 32803 35617 06892
16
16
—
—
—
—
—
—
—
—
—
—
9
9
11
11
13
13
21
21
—
—
29
29
36
36
48
48
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
20
20
—
—
—
—
—
—
—
—
—
—
16
16
25
25
32
32
40
40
50
50
63
63
10
10
10
10
10
10
10
10
10
10
10
10
14
14
14
14
14
14
14
14
14
14
10
10
10
10
10
10
14
14
14
14
10
10
10
10
10
10
10
10
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.0
2.0
2.0
2.0
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
55
INTERNATIONAL
—
—
—
—
—
—
—
—
—
—
7215E
CANADA
Punch
Die
Punch
Die
Punch
Die
Punch
Die
30.5 mm Punch
30.5 mm Die
1.3 .6
®
USA
= new product
1/2" Conduit Size Punch
1/2" Conduit Size Die
3/4" Conduit Size Punch
3/4" Conduit Size Die
1" Conduit Size Punch
1" Conduit Size Die
1-1/4" Conduit Size Punch
1-1/4" Conduit Size Die
1-1/2" Conduit Size Punch
1-1/2" Conduit Size Die
2" Conduit Size Punch
2" Conduit Size Die
Pg-9 through 30.5 mm Slug-Buster® Pg Punch Kit
Tel: +1.815.397.7070
Fax: +1.815.397.9247
31756
14722
31757
06972
31758
04011
31759
04013
31760
04061
31761
04063
31969
32002
31970
32003
31971
32004
31973
32006
36284
36279
31975
32008
31976
32009
31978
32011
35163
35162
35165
35164
35169
35168
35158
35159
35160
35161
35167
35166
1/2" - 2" Conduit Size Knockout Punch and Die Kit 5.5 2.5
32398
Tel: 800.435.0786
Fax: 800.524.2853
721-1/2
14722
721-3/4
124AV
721-1
126AV
721-1-1/4
128AV
721-1-1/2
440AV
721-2
442AV
31969
32002
31970
32003
31971
32004
31973
32006
36284
36279
31975
32008
31976
32009
31978
32011
35163
35162
35165
35164
35169
35168
35158
35159
35160
35161
35167
35166
32017
7214E
Tel: 800.435.0786
Fax: 800.451.2632
UPC No. Description
Conduit &
Pipe Size
7216
Holemaking
Cat. No.
Weight
lbs. kg.
MADE FOR THE TRADE!™
STANDARD KNOCKOUT PUNCHES
Standard Round Knockout Punches 0.5" to 6" Conduit and Pipe
• Round standard metal punch units are complete units consisting
of punch, die and draw stud.
• Use with battery-powered, hydraulic, ratchet or manual drivers.
• Properly assembled through pilot holes, they will make clean, fast
and accurate holes.
Holemaking
SPECIFICATIONS
Capacity
Application
Hole Sizes
Operation
Ball Bearing
Nut
Mild steel up through 10 gauge (3.5 mm).
Punch mild steel, aluminum, fiberglass and plastic.
Conduit Sizes - Hole size is outside diameter of US conduit sizes.
Example: 1/2" conduit size punch actually makes a 7/8" hole.
Pg Sizes - European standard pipe sizes.
ISO Sizes - International Standards Organization pipe sizes.
Operate with battery-powered, hydraulic, ratchet or manual drivers.
When used with battery-powered, hydraulic, or ratchet drivers buy the
punch and die only; the draw stud is part of the driver kit.
Bushing
Die
Draw Stud
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Every cut quick and clean
*Cat. No.
3037AV
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Punch
56
UPC No.
O4686
Slug falls free in die.
...Just tip it out.
Description
Bushing for 3-1/2" (conduit hole size) and larger punches with manual operation
www.greenlee.com
Standard Round Knockout Punches
PUNCH UNIT
REPLACEMENT PARTS
Punch Kit-Includes
Punch, Die & Draw Stud Conduit &
UPC No. Pipe Size
Cat. No.
730-1/2
730-9/16
21115
730-5/8
35192
730BB-11/16
730EBB-18.6
730BB-3/4
730EBB - 20.4
02408
02433
21115
02409
35192
25340
18886
20667
18887
—
—
—
—
—
—
—
—
—
730BB-13/16
71BB
730BB-15/16
730BB-1
730BB-1-1/16
72BB
36910
730BB-1-1/8
36506
730BB-1-1/4
24476
20668
22563
25341
20670
25342
22564
36910
20671
36506
20673
24476
—
1/2"
—
—
—
3/4"
3/4"
—
—
—
—
730BB-1-5/16 25344
—
1/2
9/16
—
5/8
—
11/16
—
3/4
—
0.500
0.563
0.598
0.625
0.638
0.688
0.732
0.750
0.803
12.7
14.3
15.2
15.9
16.2
17.5
18.6
19.1
20.4
7
—
9
—
—
—
11
—
13
—
—
—
—
16
—
—
—
20
16
16
14
16
14
14
14
14
14
1.5
1.5
2.0
1.5
2.0
2.0
2.0
2.0
2.0
.1
.1
.3
.2
.3
.3
.3
.3
.3
46
46
137
91
137
137
137
137
137
1760AV
1754AV
21316
1742AV
35193
1752AV
17700
113AV
17697
06996
04230
21316
04223
35193
04228
17700
03998
17697
1759AV
1753AV
32002
1743AV
35162
1751AV
32003
114AV
32004
04235 1675AV 04218
04229 1675AV 04218
32002 00042 00042
04224 1675AV 04218
35162 00042 00042
04227 00042 00042
32003 00042 00042
03999 00042 00042
32004 00042 00042
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
13/16 0.812
7/8 0.885
15/16 0.937
1 1.000
1-1/16 1.063
— 1.115
— 1.115
1-1/8 1.125
1-7/32 1.210
1-1/4 1.250
— 1.280
20.6
22.5
23.8
25.4
27.0
28.3
28.3
28.6
30.5
31.8
32.5
—
16
—
—
—
21
21
—
—
—
—
—
—
—
25
—
—
—
—
—
—
32
14
10
14
14
14
10
14
14
16
16
10
2.0
3.5
2.0
2.0
2.0
3.5
2.0
2.0
1.5
1.5
3.5
.3
.4
.5
.5
.5
.9
.6
.6
.6
.7
1
137
182
227
227
227
409
273
273
273
318
454
1745AV
121AV
1762AV
87AV
1763AV
123AV
36882
91AV
36282
117AV
24459
04226
04006
04238
03986
04240
04008
36882
03990
36282
04002
24459
1744AV
14722
1761AV
35164
1764AV
124AV
32006
92AV
36279
118AV
35168
04225
14722
04237
35164
04242
06972
32006
03991
36279
04003
35168
—
—
1-5/16 1.313 33.4 — — 16 1.5 .7 318 1747AV
00042 00042
00042 00042
00042 00042
00042 00042
00042 00042
249AVBB 04040
00042 00042
00042 00042
00042 00042
00042 00042
249AVBB 04040
—
—
—
—
—
—
—
—
00042 00042
04010 126AV 04011 249AVBB 04040
04734 3206AV 04735 249AVBB 04040
18331 32008 32008 249AVBB 04040
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
06587 1746AV 06586
73BB
22565
1"
— 1.362 34.6 — — 10 3.5 1.1 499 125AV
730BB-1-3/8
730EBB-37
25427
18890
—
—
1-3/8 1.375 34.9 — — 10 3.5 1.1 499 3205AV
— 1.457 37.0 29 — 10 3.5 1 454 18331
730BB-1-1/2 25428
—
1-1/2 1.500 38.1 — — 10 3.5 1.2 545 3207AV 04736 3208AV 07044 249AVBB 04040
24477
730BB-1-5/8
74BB
730BB-1-3/4
24477
25349
22566
25350
730EBB-47 18891
730BB-1-7/8 25351
—
— 1.595 40.5
—
1-5/8 1.625 41.3
1-1/4" 1-11/16 1.701 43.2
—
1-3/4 1.750 44.5
—
—
—
—
—
—
40
—
—
—
10
10
10
10
3.5
3.5
3.5
3.5
1.3
1.4
1.4
1.5
590 24462
636 1794AV
636 127AV
681 1816AV
24462 35159 35159 249AVBB
04251 1793AV 04250 249AVBB
06974 128AV 04013 249AVBB
04257 1815AV 04256 249AVBB
04040
04040
04040
04040
17687 32009 32009 304AVBB 04042
— 1.850 47.0 — — 10 3.5 1.7 772 17687
1-7/8 1.875 47.6 — — 10 3.5 1.9 862 1791AV 04248 1792AV 04249 304AVBB 04042
75BB
22567
730BB-2
20676
—
730BB-2-1/8
730BB-2-1/4
730EBB-60
20678
25360
18892
—
—
—
2-1/8 2.125 54.0 42 —
2-1/4 2.250 57.2 — —
— 2.362 60.0 48 —
76BB
22568
730BB-2-1/2 20679
2"
—
2-3/8 2.416 61.5 — —
2-1/2 2.500 63.5 — 63 10 3.5 3 1361 1758AV 04234 1757AV 04233 304AVBB 04042
= new product
21214
25361
25383
19975
25372
25403
18635
19976
21216
19977
19978
21519
19980
50005
—
—
—
2-1/2"
—
—
—
3"
—
3-1/2"
4"
—
5"
6"
= Replacement Part
2-5/8
2-3/4
—
2-7/8
3
3-1/8
—
3-1/2
3-3/4
4
4-1/2
—
5-5/8
6-3/8
2.000 50.8 — 50
2.625
2.750
2.781
2.914
3.000
3.125
3.228
3.539
3.750
4.044
4.544
4.724
5.675
6.375
= Accessory
66.7
69.9
70.6
74.0
76.2
79.4
82.0
89.9
95.3
102.7
115.4
120.0
144.1
161.9
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
440AV 04061 304AVBB 04042
10 3.5 1.9 862 1756AV 04232 35161 35161 304AVBB 04042
10 3.5 2.2 998 1783AV 04245 36173 36173 304AVBB 04042
10 3.5 2.6 1180 437AV 04058 438AV 04059 304AVBB 04042
10 3.5 2.6 1180 17690 17690 32011 32011 304AVBB 04042
10 3.5 3 1361 441AV 04062 442AV 04063 304AVBB 04042
10
10
10
10
10
10
10
10
10
10
10
10
10
10
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
908
439AV
5.1 2314 1795AV
4.8 2178 1790AV
3.8 1724 730101A
5 2268 1429AV
6.1 2767 1821AV
6 2722 1798AV
6.3 2858 18905
5.9 2677 1431AV
7.7 3493 4640AV
10 4536 2982AV
11.4 5172 2984AV
13 5897 21489
19 8619 5135AV
36 16329 5137AV
06978
04252
04247
02445
04175
04259
06363
18905
04180
05265
04653
04655
21489
05447
50008
1796AV
1789AV
730100A
1430AV
1820AV
1797AV
18906
1432AV
4641AV
2981AV
2983AV
21491
5136AV
5138AV
06997
04246
02443
04177
04258
06362
18906
04183
05266
04652
04654
21491
05448
50006
1434AV
1434AV
304AVBB
1434AV
1434AV
1434AV
1434AV
1434AV
1434AV
3026AV
3026AV
3026AV
3026AV
3026AV
04188
04188
04042
04188
04188
04188
04188
04188
04188
04679
04679
04679
04679
04679
—
—
1433AVBB
1433AVBB
—
1433AVBB
1433AVBB
1433AVBB
1433AVBB
1433AVBB
1433AVBB
3036AVBB
3036AVBB
3036AVBB
3036AVBB
3036AVBB
04187
04187
—
04187
04187
04187
04187
04187
04187
04685
04685
04685
04685
04685
57
INTERNATIONAL
730PBB-2-5/8
730BB-2-3/4
730MBB
738BB
730BB-3
730TBB
730EBB-82
739BB
730PBB-3-3/4
741BB*
742BB*
730EBB-120*
743BB*
744BB
2
2
Tel: +1.815.397.7070
Fax: +1.815.397.9247
1-1/2" 1-15/16 1.951 49.6 — — 10 3.5
CANADA
—
—
USA
—
—
—
Tel: 800.435.0786
Fax: 800.524.2853
—
—
—
—
Tel: 800.435.0786
Fax: 800.451.2632
—
Holemaking
Hole Size
Capacity
Replacement
Replacement
Actual
Mild Steel Weight Replacement Punch Replacement Die
Draw Stud
Ball Bearing Nut
ø inch
ø mm Pg ISO GA. mm lbs. g
Cat. No. UPC No. Cat. No. UPC No. Cat. No. UPC No. Cat. No. UPC No.
MADE FOR THE TRADE!™
STANDARD KNOCKOUT PUNCH KITS
Holemaking
Standard Round Manual Knockout Punch Kits
Cat. No.
735BB
737BB
7304
735BB/19973 Knockout Punch Kit Includes
Hole Size
Actual
Cat. No. UPC No. Description
ø inch
ø mm
721-1/2 31756 1/2" Conduit Size Slug-Buster® Punch 7/8 0.885 22.5
7/8 0.885 22.5
14722
14722 1/2" Conduit Size Die
00042
00042 3/8" x 1-9/16" Draw Stud
123AV
—
1.115 28.3
04008 3/4" Conduit Size Punch
—
1.115 28.3
124AV
06972 3/4" Conduit Size Die
—
1.362 34.6
125AV
04010 1" Conduit Size Punch
—
1.362 34.6
126AV
04011 1" Conduit Size Die
1-11/16 1.701 43.2
127AV
06974 1-1/4" Conduit Size Punch
1-11/16 1.701 43.2
128AV
04013 1-1/4" Conduit Size Die
249AVBB 04040 3/4" x 2-1/8" Draw Stud
31880
31880 Plastic Case
737BB
Wrenches Sold Separately
for kits 737BB, 735BB and 7304BB
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
7304 For 11 Ton
Hydraulic Drivers
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
735BB
58
Capacity
Mild Steel Weight
UPC No. Description
GA mm lbs. kg.
19973 1/2" - 1-1/4" Conduit Size Knockout 10 3.5 2.5 1.1
Punch Kit (Manual Round Standard)
19974 1-1/2" - 2" Conduit Size Knockout
10 3.5 4.4 2.0
Punch Kit (Manual Round Standard)
02815 Standard Punches and Dies (no draw 10 3.5 21 9.5
studs) for 2-1/2" through 4" Conduit,
in Plastic Case
• Assortment of commonly used round standard knockout
punches, packaged to meet the contractor’s needs.
• High-impact, rugged plastic carrying case.
737BB/19974 Knockout Punch Kit Includes
Cat. No. UPC No. Description
439AV 06978
1-1/2" Conduit Size Punch
440AV 04061
1-1/2" Conduit Size Die
441AV 04062
2" Conduit Size Punch
442AV 04063
2" Conduit Size Die
304AVBB 04042
3/4" x 2-15/16" Draw Stud
32012 32012
Plastic Case
Hole Size
Actual
ø inch
ø mm
1-15/16 1.951 49.6
1-15/16 1.951 49.6
2-3/8 2.416 61.5
2-3/8 2.416 61.5
7304/02815 Knockout Punch Kit Includes
Cat. No. UPC No. Description
1429AV 04175
2-1/2" Conduit Size Punch
1430AV 04177
2-1/2" Conduit Size Die
1431AV 04180
3" Conduit Size Punch
1432AV 04183
3" Conduit Size Die
2982AV 04978
3-1/2" Conduit Size Punch
2981AV 04652
3-1/2" Conduit Size Die
2984AV 04655
4" Conduit Size Punch
2983AV 04654
4" Conduit Size Die
30236 30236
Plastic Case
Hole Size
Actual
ø inch
ø mm
2-7/8 2.914 74.0
2-7/8 2.914 74.0
3-1/2 3.539 89.9
3-1/2 3.539 89.9
4
4.044 102.7
4
4.044 102.7
4-1/2 4.544 115.4
4-1/2 4.544 115.4
NOTE: See Standard Round Knockout Punches on pages 56 and 57 for listing of individual punch units, punches, dies and draw studs.
www.greenlee.com
Standard Round Manual Industrial Punch Kit
• Includes most popular sizes for industrial applications.
• Time-saving tool for maintenance, repair and operation applications.
• Convenient steel carrying case.
• Ball bearing drive screw for easy manual operation or use
with ratchet and hydraulic drivers.
Cat. No.
UPC No.
Description
39860
39860
3/4" - 1-1/2" Hole Size Manual Industrial Punch Kit
39860 MANUAL Industrial Knockout Punch Kit Includes
SPECIFICATIONS
Capacity
Operation
1-1/4" Punch - 16 gauge (1.5 mm) mild steel.
3/4", 1", and 1-1/8" Punches - 14 gauge (2.0 mm) mild
steel.
7/8" and 1-1/2" Punches 10 gauge (3.5 mm) mild steel.
Manual - Wrench not included.
Hole Size
Actual
ø inch
ø mm
UPC No.
Description
113AV
114AV
03998
03999
3/4" Punch
3/4" Die
3/4
3/4
0.750
0.750
19.1
19.1
121AV
14722
04006
14722
7/8" Punch
7/8" Die
7/8
7/8
0.885
0.885
22.5
22.5
87AV
35164
03986
35164
1" Punch
1" Die
1
1
1.000
1.000
25.4
25.4
91AV
92AV
03990
03991
1-1/8" Punch
1-1/8" Die
1-1/8
1-1/8
1.125
1.125
28.6
28.6
117AV
118AV
04002
04003
1-1/4" Punch
1-1/4" Die
1-1/4
1-1/4
1.250
1.250
31.8
31.8
3207AV
3208AV
04736
07044
1-1/2" Punch
1-1/2" Die
1-1/2
1-1/2
1.500
1.500
38.1
38.1
00042
249AVBB
00042
04040
3/8" BB Draw Stud
3/4" BB Draw Stud
19193
19193
Steel Storage Box
Holemaking
Wrench Sold Separately
Cat. No.
59
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Accessory
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
= Replacement Part
USA
Tel: 800.435.0786
Fax: 800.451.2632
= new product
MADE FOR THE TRADE!™
Standard Round Manual Knockout Punch Kits - Metric
Holemaking
• 1" (25.4 mm) Hex ratchet wrench allows use with both 3/8" (9.5 mm)
and 3/4" (19.1 mm) draw studs.
• 12.7 mm Kwik Stepper® step bit included.
• Plastic carrying case included.
36687
Operation
Cat. No. UPC No. Description
21316
31969
32002
17700
32003
17697
32004
121AV
14722
36882
32006
36282
36279
18331
32008
17687
32009
17690
32011
35193
35162
87AV
35164
24459
35168
24462
35159
1756AV
35161
1758AV
1757AV
249AVBB
304AVBB
34941
34410
00042
36685
Punches and Dies
Draw Studs
and Misc.
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Weight
lbs. kg.
P g-9 through Pg-48 Manual Round
Standard Knockout Punch Kit
ISO-16 through ISO-40 Manual
Round Standard Knockout Punch Kit
Pg-9 through Pg-48 Standard
Knockout Pg. Punch Kit. Replacement
Kit Packaged in Carton Without
Plastic Case.
8.8
36687 36687
36688 36688
7309E 32804
Manual - Ratchet wrench included
Tel: 800.435.0786
Fax: 800.451.2632
Description
SPECIFICATIONS
60
Cat. No. UPC No.
21316
31969
32002
17700
32003
17697
32004
04006
14722
36882
32006
36282
36279
18331
32008
17687
32009
17690
32011
35193
35162
03986
35164
24459
35168
24462
35159
04232
35161
04234
04233
04040
04042
34941
34410
00042
36685
Hole Size
Actual
ø inch
ø mm Pg
Pg-9 Punch
—
0.598 15.2
Pg-9 Slug-Buster® Punch
—
0.598 15.2
Pg-9 Die
—
0.598 15.2
Pg-11 Punch
—
0.732 18.6
Pg-11 Die
—
0.732 18.6
Pg-13 Punch
—
0.803 20.4
Pg-13 Die
—
0.803 20.4
Pg-16 Punch
7/8 0.885 22.5
Pg-16 Die
7/8 0.885 22.5
Pg-21 Punch
—
1.115 28.3
Pg-21 Die
—
1.115 28.3
30.5 mm Punch
1-7/32 1.210 30.5
30.5 mm Die
1-7/32 1.210 30.5
Pg-29 Punch
—
1.457 37.0
Pg-29 Die
—
1.457 37.0
Pg-36 Punch
—
1.850 47.0
Pg-36 Die
—
1.850 47.0
Pg-48 Punch
—
2.362 60.0
Pg-48 Die
—
2.362 60.0
ISO-16 Punch
—
0.638 16.2
ISO-16 Die
—
0.638 16.2
ISO-25 Punch
1
1.000 25.4
ISO-25 Die
1
1.000 25.4
ISO-32 Punch
—
1.280 32.5
ISO-32 Die
—
1.280 32.5
ISO-40 Punch
—
1.595 40.5
ISO-40 Die
—
1.595 40.5
ISO-50 Punch
2
2.000 50.8
ISO-50 Die
2
2.000 50.8
ISO-63 Punch
2-1/2 2.500 63.5
ISO-63 Die
2-1/2 2.500 63.5
Draw Stud – 3/4" x 2-1/8"
Draw Stud – 3/4" x 2-15/16"
Ratchet Wrench – 1" Hex
Kwik Stepper® Step Bit 1/2" (12.7 mm)
Ball Bearing Draw Stud with 1" Hex Head, 3/8" x 1-5/8"
Plastic Case
9
9
9
11
11
13
13
16
16
21
21
—
—
29
29
36
36
48
48
—
—
—
—
—
—
—
—
—
—
—
—
ISO
—
—
—
—
—
20
20
—
—
—
—
—
—
—
—
—
—
—
—
16
16
25
25
32
32
40
40
50
50
63
63
Capacity
Kit Cat./UPC No.
Mild Steel
7309E
GA mm 36687 36688 32804
14
14
14
14
14
14
14
10
10
10
10
16
16
10
10
10
10
10
10
14
14
14
14
10
10
10
10
10
10
10
10
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.5
3.5
3.5
3.5
1.5
1.5
3.5
3.5
3.5
3.5
3.5
3.5
2.0
2.0
2.0
2.0
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
4
5.2 2.3
8.8
4
www.greenlee.com
ELECTRIC & BATTERY-POWERED KNOCKOUT KITS
LS60L Battery-Powered Knockout Punch Driver Kits
LS60LA11
SPECIFICATIONS
8.8 lbs. (4.0 kg)
11.5 in. (292 mm)
12.5 in. (318 mm)
6.7 tons (60 kN)
2.42 in. dia. (61.5 mm dia)
2-11/16 in. x 2-11/16 in. (68.0 x 68.0 mm)
1.378 x 2.559 in. (35.0 x 65.0 mm)
UPC No.
Description
LS60LA11
LS60LA12
LS60LA22
LS60LB11
LS60LB12
LS60LB22
LS60LA120
LS60LA230
LS60LB120
LS60LB230
52155
52156
52157
52158
52159
52160
52161
52162
52163
52164
Battery Punch Driver -120 Volt Charger
Battery Punch Driver -12 Volt Charger
Battery Punch Driver -230 Volt Charger
Battery Punch Driver -120 Volt Charger
Battery Punch Driver -12 Volt Charger
Battery Punch Driver -230 Volt Charger
Punch Driver - 120 Volt AC Adapter
Punch Driver - 230 Volt AC Adapter
Punch Driver - 120 Volt AC Adapter
Punch Driver - 230 Volt AC Adapter
See page 62 for complete parts list for all kits.
STEEL CAPACITIES FOR CONDUIT SIZES
Standard Punches and Slug-Buster®
1924AA Spacer
31872 3/4" Draw Stud
31872 3/4" Draw Stud
33967 Adapter
1
29451 sold separately. See page 76 for ordering information.
10 Ga. (0.1345" [3.5 mm]) Mild Steel
10 Ga. (0.1345" [3.5 mm]) Stainless Steel
12 Ga. (0.1046" [2.5 mm]) Stainless Steel
16 Ga. (0.0598" [1.5 mm]) Mild Steel and 1/8" Aluminum
= new product
= Replacement Part
= Accessory
61
INTERNATIONAL
1
1924AA Spacer
29451 7/16" Draw Stud
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Electronic Connector Punches
RS-232, 229, 231, 234, 238
1614SS Draw Stud
1924AA Spacer
33967 Adapter
CANADA
1/2"
3/4" 1-7/32"
1"
1-1/4" 1-1/2"
2"
1/2"
3/4" 1-7/32"
1"
1-1/4" 1-1/2"
2"
con.
con.
con.
con.
con.
con.
con.
con.
con.
con.
con.
con.
ø 0.885" ø 1.115" ø 1.210" ø 1.362" ø 1.701" ø 1.951" ø 2.415" ø 0.885" ø 1.115" ø 1.210" ø 1.362" ø 1.701" ø 1.951" ø 2.416"
22.5mm 28.3mm 30.5mm 34.6mm 43.2mm 49.6mm 61.5mm 22.5mm 28.3mm 30.5mm 34.6mm 43.2mm 49.6mm 61.5mm
Tel: 800.435.0786
Fax: 800.524.2853
Stud and
Accessories
Slug-Splitter SC™
USA
0.87 in (22 mm)
Approximately 1 hour
18 V, 3.0Ah, Li-ion
Tel: 800.435.0786
Fax: 800.451.2632
Weight (driver with battery
only)
Overall Length (ram
retracted)
Height
Maximum Punch Force
Maximum Round Punch Size
(in 10 gauge mild steel)
Maximum Square Punch Size
(in 10 gauge mild steel)
Maximum Rectangular
Punch Size (in 10 gauge mild
steel)
Maximum Ram Travel
Charging Time
Battery Voltage
Cat. No.
Holemaking
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles
per charge and faster cycle times.
• LED light provides the operator with the battery charge and tool
maintenance status.
• Forward handle position improves tool balance.
• One trigger controls all tool functions.
• Punching cycle stops automatically when hole is complete to prevent
damage to punch
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger
MADE FOR THE TRADE!™
Battery-Powered Knockout Punch Driver Kits Parts List
Punches and Dies
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Draw Studs
and Misc.
Holemaking
62
Cat. No.
UPC No. Description
721-1/2
14722
721-3/4
124AV
721-1
126AV
721-1-1/4
128AV
721-1-1/2
440AV
721-2
442AV
1614SS
31872
1924AA
33967
01686
MKLS60
31756
14722
31757
06972
31758
04011
31759
04013
31760
04061
31761
04063
30043
31872
03248
33967
01686
05956
1/2" Conduit Size
Slug-Buster® Punch
1/2" Conduit Size Die
3/4" Conduit Size
Slug-Buster® Punch
3/4" Conduit Size Die
1" Conduit Size
Slug-Buster® Punch
1" Conduit Size Die
1-1/4" Conduit Size
Slug-Buster® Punch
1-1/4" Conduit Size Die
1-1/2" Conduit Size
Slug-Buster® Punch
1-1/2" Conduit Size Die
2" Conduit Size
Slug-Buster® Punch
2" Conduit Size Die
Draw Stud–3/8" x 2-13/16"
Draw Stud–3/4" x 4-1/8"
Spacer-Short
Stud Adapter–3/8"
Metal Case
Case for LS60
Conduit
& Pipe
Size
Hole Size
A
ctual
ø inch
ø mm
Pg
Kit Cat./UPC No.
LS60LA11/03557 LS60LB11/04311
LS60LA12/03558 LS60LB12/04661
LS60LA22/03559 LS60LB22/04312
1/2"
1/2"
7/8
7/8
0.885
0.885
22.5
22.5
16
16
✓
✓
3/4"
3/4"
—
—
1.115
1.115
28.3
28.3
21
21
✓
✓
1"
1"
—
—
1.362
1.362
34.6
34.6
—
—
✓
✓
1-1/4"
1-1/4"
1-11/16
1-11/16
1.701
1.701
43.2
43.2
—
—
✓
✓
1-1/2"
1-1/2"
1-15/16
1-15/16
1.951
1.951
49.6
49.6
—
—
✓
✓
2"
2"
2-3/8
2-3/8
2.416
2.416
61.5
61.5
—
—
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Optional Accessories for LS6011B, LS6012B, and LS6022B (not included in kits)
29451
29451
Draw Stud–7/16" x 4-1/2" for Slug Splitter SC™ Stainless Steel Punches
www.greenlee.com
HYDRAULIC KNOCKOUT KITS
Quick Draw® Hydraulic Punch Driver and Kits
7706SB
Flex Driver Kit
7806SB
Quick Draw® Kit
Weight
lbs. kg.
12.1 5.5
17.3 7.9
10
4.5
14
6.4
9.4
4.3
10.3 4.7
11.4 5.2
4.5
14
6.4
11
5.0
11
5.0
12.2 5.5
See page 63 for complete parts list for all kits.
Standard Punches and Slug-Buster®
Required
Draw Stud and
Accessories
1/2"
3/4"
1-7/32"
Oiltight
1"
1-1/4"
1-1/2"
Slug-Splitter SC™
2"
1/2"
3/8" Draw Stud
Spacer & 7/16" Draw Stud
Spacer & 3/4" Draw Stud
3/4"
1-7/32"
Oiltight
1-1/4"
Tel: +1.815.397.7070
Fax: +1.815.397.9247
3/4" Draw Stud
10 GA. Mild Steel
= new product
= Replacement Part
= Accessory
10 GA. Stainless Steel
63
INTERNATIONAL
STEEL CAPACITIES FOR CONDUIT SIZES
CANADA
10
Tel: 800.435.0786
Fax: 800.524.2853
Description
Quick Draw® Flex Driver, 2 Draw Studs,
1 Adapter, 1 Spacer and Case
Standard – Quick Draw® Flex Driver, 1/2" through
2" Slug-Buster® Conduit Size Punches and Dies,
2 Draw Studs, 1 Adapter, 1 Spacer and Case
Quick Draw® Driver, 2 Draw Studs, 1 Adapter,
1 Spacer and Case
Standard – Quick Draw® Driver, 1/2" through 2"
Slug-Buster® Conduit Size Punches and Dies
2 Draw Studs, 1 Adapter, 1 Spacer and Case
Metric – Quick Draw® Driver, 2 Draw Studs,
1 Adapter, 1 Spacer and Case
Metric – Quick Draw® Driver, Slug-Buster® Pg
Punches and Dies 15.2 mm through 30.5 mm,
2 Draw Studs, 1 Adapter, 1 Spacer and Case
Metric – Quick Draw® Driver, Slug-Buster®
ISO Punches and Dies 16.2 mm through 40.5 mm,
2 Draw Studs, 1 Adapter, 1 Spacer and Case
Quick Draw 90® Driver, 2 Draw Studs,
1 Adapter, 1 Spacer and Case
Quick Draw 90® Driver, 1/2" through 2"
Slug-Buster® Conduit Size Punches and Dies,
Draw Studs, 1 Adapter, 1 Spacer and Case
Metric – Quick Draw 90® Driver, 2 Draw Studs,
1 Adapter, 1 Spacer and Case
Metric – Quick Draw 90® Driver, Slug-Buster®
Pg Punches and Dies 15.2 mm through 30.5 mm,
2 Draw Studs, 1 Adapter, 1 Spacer and Case
Metric – Quick Draw 90® Driver, Slug-Buster®
ISO Punches and Dies 16.2 mm through 40.5 mm,
2 Draw Studs, 1 Adapter, 1 Spacer and Case
Plastic Case
USA
7906SB
Quick Draw 90® Kit
UPC No.
10475
10476
34292
34293
34291
35611
35614
33794
34300
34299
35615
35616
34983
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
7704SB
7706SB
7804SB
7806SB
7804E
7804ESB
7804ISO
7904SB
7906SB
7904E
7904ESB
7904ISO
34983
Holemaking
The Quick Draw®, Quick Draw 90®, and Quick Draw® Flex feature:
• Compact, lightweight design for portability and fast, easy
one-person operation.
• Develops 8 tons of hydraulic force for easy punching, even in
10-gauge stainless steel, depending on individual punch capacities.
• Quick Draw® is perfect for fast, straight-on front panel punching.
• Quick Draw 90®’s right angle driver head rotates over 180 degrees
for maximum flexibility in tight working areas.
• Quick Draw® Flex allows unlimited driver orientation to simplify
access to work area.
• Can be used with non-round punches within the capacity of the tool
(adapter may be required).
• U.S. Patent #6,772,521.
MADE FOR THE TRADE!™
Parts List for Quick Draw®, Quick Draw 90® and Quick Draw® Flex Kits
Hole Size
Actual
ø inch
7704SB/ 7706SB/ 7804E/ 7804ESB/ 7804ISO/ 7804SB/ 7806SB/ 7904E/ 7904ESB/ 7904ISO/ 7904SB/ 7906SB/
Cat. No.
UPC No. Description
Size
721-1/2
31756 1/2" Conduit Size
Slug-Buster® Punch
1/2"
7/8
0.885 22.5 16 —
✓
✓
✓
✓
✓
14722
14722 1/2" Conduit Size Die
1/2"
7/8
0.885 22.5 16 —
✓
✓
✓
✓
✓
721-3/4
31757 3/4" Conduit Size
Slug-Buster® Punch
3/4"
—
1.115 28.3 21 —
✓
✓
✓
124AV
06972 3/4" Conduit Size Die
3/4"
—
1.115 28.3 21 —
✓
✓
✓
721-1
31758 1" Conduit Size
Slug-Buster® Punch
1"
—
1.362 34.6 — —
✓
✓
✓
126AV
04011 1" Conduit Size Die
1"
—
1.362 34.6 — —
✓
✓
✓
721-1-1/4 31759 1-1/4" Conduit Size
Slug-Buster® Punch
1-1/4" 1-11/16 1.701 43.2 — —
✓
✓
✓
128AV
04013 1-1/4" Conduit Size Die 1-1/4" 1-11/16 1.701 43.2 — —
✓
✓
✓
721-1-1/2 31760 1-1/2" Conduit Size
Slug-Buster® Punch
1-1/2" 1-15/16 1.951 49.6 — —
✓
✓
✓
440AV
04061 1-1/2" Conduit Size Die 1-1/2" 1-15/16 1.951 49.6 — —
✓
✓
✓
721-2
31761 2" Conduit Size
Slug-Buster® Punch
2"
2-3/8 2.416 61.5 — —
✓
✓
✓
442AV
04063 2" Conduit Size Die
2"
2-3/8 2.416 61.5 — —
✓
✓
✓
31969
31969 Slug-Buster® Punch
—
—
0.598 15.2 9 —
✓
✓
32002
32002 Die
—
—
0.598 15.2 9 —
✓
✓
31970
31970 Slug-Buster® Punch
—
—
0.732 18.6 11 —
✓
✓
ø mm Pg ISO 10475 10476 34291 35611 35614 34292 34293 34299 35615 35616 33794 34300
32003
32003 Die
—
—
0.732 18.6 11 —
✓
✓
31971
31971 Slug-Buster® Punch
—
—
0.803 20.4 13 20
✓
✓
✓
✓
32004
32004 Die
—
—
0.803 20.4 13 20
✓
✓
✓
✓
31973
31973 Slug-Buster® Punch
3/4"
—
1.115 28.3 21 —
✓
✓
32006
32006 Die
3/4"
—
1.115 28.3 21 —
✓
✓
36284
36284 30.5 mm
Slug-Buster® Punch
—
1-7/32 1.210 30.5 — —
✓
✓
36279
36279 30.5 mm Die
—
1-7/32 1.210 30.5 — —
✓
✓
35163
35163 ISO-16
Slug-Buster® Punch
—
—
0.638 16.2 — 16
✓
35162
35162 ISO-16 Die
—
—
0.638 16.2 — 16
✓
✓
35165
35164
35165 ISO-25
Slug-Buster® Punch
35164 ISO-25 Die
—
—
1
1
1.000 25.4 — 25
1.000 25.4 — 25
✓
✓
✓
35169
35168
35169 ISO-32
Slug-Buster® Punch
35168 ISO-32 Die
—
—
—
—
1.280 32.5 — 32
1.280 32.5 — 32
✓
✓
✓
35158
35158 ISO-40
35159
Slug-Buster® Punch
35159 ISO-40 Die
—
—
—
—
1.595 40.5 — 40
1.595 40.5 — 40
✓
✓
✓
34288
34288 Quick Draw® Hydraulic
Punch Driver
✓
✓
✓
✓
✓
33786
33786 Quick Draw 90®
Hydraulic Punch Driver
✓
✓
✓
✓
10383
10383 Quick Draw® Flex Driver
✓
✓
✓
1614SS
30043 Draw Stud–3/8" x 2-13/16"
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
31872
31872 Draw Stud–3/4" x 4-1/8"
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
1924AA
03248 Spacer-Short
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
33967
33967 Stud Adapter–3/8"
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
35202
35202 Plastic Case
✓
✓
✓
✓
✓
✓
34983
34983 Plastic Case
✓
✓
✓
✓
10391
10391 Plastic Case
✓
✓
Optional Accessories for 7806SB, 7804E, 7804ESB, 7804ISO, 7906SB, 7904E, 7904ESB and 7904ISO Kits (not included in kits)
29451
29451 7/16" (11.1 mm) Stainless Steel Draw Stud
Draw Studs and Misc.
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
& Pipe
Punches and Dies
Holemaking
64
Kit Cat./UPC No.
Conduit
www.greenlee.com
Slug-Buster® Ram and Foot Pump Hydraulic Driver Kits
7625
• Foot operation frees both hands to position punch.
• Punches 10 times faster than wrench method.
• Will also drive 751 Cable Cutter head.
• Powerful 11-ton hydraulic ram.
• Can be used with most standard round, Slug-Buster®
and Slug-Splitter SC™ punch sizes. (Not 1/2", 9/16" 5/8")
• Can be used with non-round punches (adapter may be required).
Weight
lbs. kg.
7625
25097
Driver, Foot Pump, Steel Case
37 17
7606SB
7610SB
07173
07174
Driver, Foot Pump, Slug-Buster® Punches, Dies and 42 19
Draw Studs for 1/2" through 2" Conduit, Steel Case
Driver, Foot Pump, Slug-Buster® Punches, Dies & Draw 60 27
Studs for 1/2" through 2" Conduit, Slug-Buster® Punches
and 2 1/2" through 4" Conduit Standard Round Punches
STEEL CAPACITIES FOR CONDUIT SIZES
Required Draw Stud
Standard & Slug-Buster® Punches
Standard
and Accessories
1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4"
3/4" Stud (2113B), 3/8" Stud (20963) & Spacers
3/4" Stud (2113B), Long Spacer
3/4" Stud (2113B), Short Spacer
3/4" Stud (2113B)
3/4" Stud (2113B), & Sleeve (03170)
7/16" Stud (29451)
3/4" Stud (29452)
10 GA. Mild Steel
Slug-Splitter SC™
1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
Holemaking
Cat. No. UPC No. Description
10 GA. Stainless Steel
65
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Accessory
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
= Replacement Part
USA
Tel: 800.435.0786
Fax: 800.451.2632
= new product
MADE FOR THE TRADE!™
Cat. No.
UPC No.
Description
721-1/2
31756
1/2" Conduit Size Slug-Buster® Punch
14722
721-3/4
124AV
721-1
126AV
721-1-1/4
128AV
721-1-1/2
440AV
721-2
442AV
14722
31757
06972
31758
04011
31759
04013
31760
04061
31761
04063
1/2" Conduit Size Die
3/4" Conduit Size Slug-Buster® Punch
3/4" Conduit Size Die
1" Conduit Size Slug-Buster® Punch
1" Conduit Size Die
1-1/4" Conduit Size Slug-Buster® Punch
1-1/4" Conduit Size Die
1-1/2" Conduit Size Slug-Buster® Punch
1-1/2" Conduit Size Die
2" Conduit Size Slug-Buster® Punch
2" Conduit Size Die
1429AV
1430AV
1431AV
1432AV
2982AV
2981AV
2984AV
2983AV
746
2113B
54167
54168
1557AA
20963
15908
1924AA
1925AA
1926AA
34410
1725
37729
54169
54170
23955
25094
04175
04177
04180
04183
04653
04652
04655
04654
17091
10109
54167
54168
03170
20963
15908
03248
03249
06904
34410
31353
37729
54169
54170
23955
25094
Hole Size
Punches and Dies
Draw Studs
and Misc.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Holemaking
Ram and Foot Pump Kits Parts List
Conduit
& Pipe
Size
1/2"
1/2"
3/4"
3/4"
1"
1"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
2"
Kit Cat./UPC No.
Actual
ø inch
ø mm
7/8
7/8
—
—
—
—
1-11/16
1-11/16
1-15/16
1-15/16
2-3/8
0.885
0.885
1.115
1.115
1.362
1.362
1.701
1.701
1.951
1.951
2.416
2.416
22.5
22.5
28.3
28.3
34.6
34.6
43.2
43.2
49.6
49.6
61.5
61.5
2"
2-3/8
2-1/2" Conduit Size Punch
2-1/2" 2-7/8
2.914 74.0
2-1/2" Conduit Size Die
2-1/2" 2-7/8
2.914 74.0
3" Conduit Size Punch
3"
3-1/2
3.539 89.9
3" Conduit Size Die
3"
3-1/2
3.539 89.9
3-1/2" Conduit Size Punch
3-1/2"
4
4.044 102.7
3-1/2" Conduit Size Die
3-1/2"
4
4.044 102.7
4" Conduit Size Punch
4"
4-1/2
4.544 115.4
4" Conduit Size Die
4"
4-1/2
4.544 115.4
(A) Ram (includes 1 ea. of items B, C, and D)
(B) Draw Stud–3/4" x 8"
(C) Female Coupler–1/4"
(D) Dust Plug
(F) Punch Sleeve
(G) Draw stud–3/8"x 7.9"
(H) Spacer Group (includes 1 ea. of items I, J, and K)
(I) Spacer-Short
(J) Spacer-Medium
(K) Spacer-Long
(L) Kwik Stepper® Step Bit 1/2"
(S) Hydraulic Foot Pump (includes 1 ea. – 54167 female coupler and 54168 dust plug)
(T) High Pressure Hose Unit – 1/4" x 10'; filled with hydraulic oil;
(includes the following 2 items)
Couplers
Dust Caps
(U) Steel case
Tray
Ram and Foot Pump Hydraulic Driver Parts Identification
(Match letters above to drawing.)
U
T
S
A
F
C
C
B
D
66
D
H
G
L
Pg
7625/ 7606SB/ 7610SB/
25097
07173 07174
16
16
21
21
—
—
—
—
—
—
—
—
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
—
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
2
2
1
1
2
2
1
1
—
—
—
—
—
—
—
—
www.greenlee.com
Ram and Hand Pump Kits Parts List
Hole Size
UPC No. Description
32011
746
2113B
1557AA
20963
15908
1924AA
1925AA
1926AA
34410
767
06302
30206
18402
25094
32011
17091
10109
03170
20963
15908
03248
03249
06904
34410
13284
06302
30206
18402
25094
Draw Studs
and Misc.
Punches and Dies
Die
Slug-Buster® Punch
Die
Slug-Buster® Punch
Die
Slug-Buster® Punch
Die
30.5 mm Slug-Buster® Punch
30.5 mm Die
Slug-Buster® Punch
Die
Slug-Buster® Punch
Die
Slug-Buster® Punch
= new product
2"
2-3/8
2-1/2" 2-7/8
2-1/2" 2-7/8
3"
3-1/2
3"
3-1/2
3-1/2"
4
3-1/2"
4
4"
4-1/2
4"
4-1/2
—
—
0.598
—
—
0.598
—
—
0.732
—
—
0.732
—
—
0.803
—
—
0.803
3/4"
—
1.115
3/4"
—
1.115
—
1-7/32 1.210
—
1-7/32 1.210
—
—
1.457
—
—
1.457
—
—
1.850
—
—
1.850
—
—
Die
—
—
Ram (includes following item)
Draw Stud–3/4" x 8"
Punch Sleeve
Draw Stud–3/8"x 7.9"
Spacer Group (includes 1 ea. of the following 3 items)
Spacer-Short
Spacer-Medium
Spacer-Long
Kwik Stepper® Step Bit 1/2"
Hydraulic Hand Pump
High Pressure Hose–1/4" x 3'
Plastic Case
Steel Case
Punch Tray
= Replacement Part
= Accessory
2.362
2.362
22.5
22.5
28.3
28.3
34.6
34.6
43.2
43.2
49.6
49.6
61.5
61.5
74.0
74.0
89.9
89.9
102.7
102.7
115.4
115.4
16
16
21
21
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
15.2
15.2
18.6
18.6
20.4
20.4
28.3
28.3
30.5
30.5
37.0
37.0
47.0
47.0
9
9
11
11
13
13
21
21
—
—
29
29
36
36
—
—
—
—
20
20
—
—
—
—
—
—
—
—
1
1
1
1
1
1
1
1
1
1
1
1
1
1
60.0 48 —
60.0 48 —
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
67
INTERNATIONAL
32002
31970
32003
31971
32004
31973
32006
36284
36279
31975
32008
31976
32009
31978
0.885
0.885
1.115
1.115
1.362
1.362
1.701
1.701
1.951
1.951
2.416
2.416
2.914
2.914
3.539
3.539
4.044
4.044
4.544
4.544
CANADA
32002
31970
32003
31971
32004
31973
32006
36284
36279
31975
32008
31976
32009
31978
7/8
7/8
—
—
—
—
1-11/16
1-11/16
1-15/16
1-15/16
2-3/8
USA
1/2"
1/2"
3/4"
3/4"
1"
1"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
2"
Tel: +1.815.397.7070
Fax: +1.815.397.9247
1/2" Conduit Size Slug-Buster® Punch
1/2" Conduit Size Die
3/4" Conduit Size Slug-Buster® Punch
3/4" Conduit Size Die
1" Conduit Size Slug-Buster® Punch
1" Conduit Size Die
1-1/4" Conduit Size Slug-Buster® Punch
1-1/4" Conduit Size Die
1-1/2" Conduit Size Slug-Buster® Punch
1-1/2" Conduit Size Die
2" Conduit Size Slug-Buster® Punch
2" Conduit Size Die
2-1/2" Conduit Size Punch
2-1/2" Conduit Size Die
3" Conduit Size Punch
3" Conduit Size Die
3-1/2" Conduit Size Punch
3-1/2" Conduit Size Die
4" Conduit Size Punch
4" Conduit Size Die
Slug-Buster® Punch
7646/ 7306SB/ 7310SB/ 7646PgSB/
Pg ISO 15906 34360 34361
32799 38520
Tel: 800.435.0786
Fax: 800.524.2853
31756
14722
31757
06972
31758
04011
31759
04013
31760
04061
31761
04063
04175
04177
04180
04183
04653
04652
04655
04654
31969
Actual
ø inch
ø mm
Tel: 800.435.0786
Fax: 800.451.2632
721-1/2
14722
721-3/4
124AV
721-1
126AV
721-1-1/4
128AV
721-1-1/2
440AV
721-2
442AV
1429AV
1430AV
1431AV
1432AV
2982AV
2981AV
2984AV
2983AV
31969
Kit Cat./UPC No.
Holemaking
Cat. No.
Conduit
& Pipe
Size
MADE FOR THE TRADE!™
Ram and Hand Pump Hydraulic Driver Kits (Inch and Metric)
Cat. No. UPC No.
7646
7306
7306SB
7310SB
Holemaking
• Fast, easy and simple to operate.
• Compact design for field use on construction sites
and maintenance jobs.
• Punches 10 times faster than wrench method.
• Will also drive 751 Cable Cutter head.
• Can be used with most standard round Slug-Buster®
and Slug-Splitter SC™ punches (not 1/2", 9/16", 5/8").
• Can be used with non-round punches (adapter may be required).
• 3-foot hose
• Powerful 11-ton hydraulic ram.
STEEL CAPACITIES FOR CONDUIT SIZES
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
3/4"
7310
7310SB
7646Pg
7646PgSB
15910
34361
27433
32799
7304
38456
38520
02815
38456
38520
Standard & Slug-Buster® Punches
Required Draw Stud and Accessories 1/2"
1" 1-1/4" 1-1/2" 2"
Weight
lbs. kg.
Driver with Hand Pump, Draw Studs,
S pacer and Plastic Case
Driver, Hand Pump, Standard Punches,
Dies and Draw Studs for 1/2" through
2" Conduit, Plastic Case
Driver, Hand Pump, Slug-Buster® Punches,
Dies and Draw Studs for 1/2" through 2"
Conduit, Adapter, Spacers, Kwik Stepper®
Step Bit and Plastic Case
Driver, Hand Pump, Standard Punches,
Dies and Draw Studs and Spacers for
1/2" through 4" Conduit, Steel Case
Driver, Hand Pump, Slug-Buster® Punches,
Dies and Draw Studs for 1/2" through 2"
and 2-1/2" through 4" Standard Conduit
Size Punches, Dies and Draw Studs,
Adapter, Spacers, Kwik Stepper® Step Bit
and Steel Case
Metric – Driver, Hand Pump, Standard
Pg Punches, Dies and Draw Studs and
Spacers for 15.2 mm through 60.0 mm,
Plastic Case
Metric – Driver, Slug-Buster® Pg Punches,
Dies and Draw Studs for 15.2 mm through
60.0 mm, Adapter, Spacers, Kwik Stepper®
Step Bit and Plastic Case
Standard Punch and Die Kit (no draw studs)
for 2-1/2" through 4" Conduit, Plastic Case
Driver, Hand Pump, Standard Punches, Dies
and Draw Studs and Spacers for 1/2"
through 3" and 4" Conduit, Steel Case
Driver, Hand Pump, Slug-Buster® Punches
and Draw Studs for 1/2" through 3" and 4"
Conduit, Adapter, Spacers, Kwik Stepper®
Step Bit and Steel Case
20
9.1
24
10.9
24
10.9
54
24.5
54
24.5
24
10.9
24
10.9
21
9.5
48.4
22
48
21.8
Standard
2-1/2"
3"
3-1/2" 4"
Slug-Splitter SC™
1/2"
3/4"
1"
1-1/4" 1-1/2"
3/4" Stud (2113B),
3/8" Stud (20963) & Spacers
3/4" Stud (2113B),
Long Spacer
3/4" Stud (2113B),
Short Spacer
3/4" Stud (2113B)
3/4" Stud (2113B),
& Sleeve (03170)
7/16" Stud (29451)
3/4" Stud (29452)
10 GA. Mild Steel
BB
F
F
10 GA. Stainless Steel
H
H
G
G
L
L
KK JJ
AA
I
R
R
M
M
N
N
68
15906
15909
34360
D
escription
Ram and Hand Pump Hydraulic Driver Parts Identification
Key
Cat./UPC No.
Description
A
746 / 17091
Ram (includes Item B)
B
2113B / 10109
Draw Stud–3/4" x 8"
F
1557AA / 03170
Punch Sleeve
G
20963 / 20963
Draw Stud–3/8" x 7.9"
H
15908
Spacer Group (includes Items I, J and K)
I
1924AA / 03248
Spacer-Short
J
1925AA / 03249
Spacer-Medium
K
1926AA / 06904
Spacer-Long
L
34410
Kwik Stepper® Step Bit 1/2"
M
767 / 13284
Hydraulic Hand Pump
N
06302 / 06302
High Pressure Hose–1/4" x 3'
R
30206
Plastic Case
2"
www.greenlee.com
Ram and Hand Pump Kits Parts List
Hole Size
03249
06904
34410
13284
06302
30206
18402
Spacer-Medium
Spacer-Long
Kwik Stepper® Step Bit 1/2"
Hydraulic Hand Pump
High Pressure Hose–1/4" x 3'
Plastic Case
Steel Case
= new product
= Replacement Part
= Accessory
22.5
22.5
22.5
28.3
28.3
34.6
34.6
43.2
43.2
49.6
49.6
61.5
61.5
74.0
74.0
89.9
89.9
102.7
102.7
115.4
115.4
15.2
15.2
18.6
18.6
20.4
20.4
28.3
28.3
30.5
30.5
37.0
37.0
47.0
47.0
60.0
60.0
16
16
16
21
21
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
9
9
11
11
13
13
21
21
—
—
29
29
36
36
48
48
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
69
INTERNATIONAL
1925AA
1926AA
34410
767
06302
30206
18402
7/8
7/8
7/8
—
—
—
—
1-11/16
1-11/16
1-15/16
1-15/16
2-3/8
2-3/8
2-7/8
2-7/8
3-1/2
3-1/2
4
4
4-1/2
4-1/2
CANADA
0.885
0.885
0.885
1.115
1.115
1.362
1.362
1.701
1.701
1.951
1.951
2.416
2.416
2.914
2.914
3.539
3.539
4.044
4.044
4.544
4.544
Punch
—
—
0.598
Die
—
—
0.598
Punch
—
—
0.732
Die
—
—
0.732
Punch
—
—
0.803
Die
—
—
0.803
Punch
3/4"
—
1.115
Die
3/4"
—
1.115
—
1-7/32 1.210
30.5 mm Punch
—
1-7/32 1.210
30.5 mm Die
Punch
—
—
1.457
Die
—
—
1.457
Punch
—
—
1.850
Die
—
—
1.850
Punch
—
—
2.362
Die
—
—
2.362
Ram (includes following item)
Draw Stud–3/4" x 8"
Punch Sleeve
Draw Stud–3/8" x 7.9"
Spacer Group (includes 1 ea. of the following 3 items)
Spacer-Short
See Slug-Buster Knockout Punches on pages 49 and 50.
1/2"
1/2"
1/2"
3/4"
3/4"
1"
1"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
2"
2"
2-1/2"
2-1/2"
3"
3"
3-1/2"
3-1/2"
4"
4"
USA
31756
04006
14722
04008
06972
04010
04011
06974
04013
06978
04061
04062
04063
04175
04177
04180
04183
04653
04652
04655
04654
21316
32002
17700
32003
17697
32004
36882
32006
36282
36279
18331
32008
17687
32009
17690
32011
17091
10109
03170
20963
15908
03248
Tel: +1.815.397.7070
Fax: +1.815.397.9247
721-1/2
121AV
14722
123AV
124AV
125AV
126AV
127AV
128AV
439AV
440AV
441AV
442AV
1429AV
1430AV
1431AV
1432AV
2982AV
2981AV
2984AV
2983AV
21316
32002
17700
32003
17697
32004
36882
32006
36282
36279
18331
32008
17687
32009
17690
32011
746
2113B
1557AA
20963
15908
1924AA
7646/ 7306/ 7310/ 7646Pg/
Pg 15906 15909 15910 27433 38456
Tel: 800.435.0786
Fax: 800.524.2853
Draw Studs
and Misc.
1/2" Conduit Size Slug-Buster® Punch
1/2" Conduit Size Punch
1/2" Conduit Size Die
3/4" Conduit Size Punch
3/4" Conduit Size Die
1" Conduit Size Punch
1" Conduit Size Die
1-1/4" Conduit Size Punch
1-1/4" Conduit Size Die
1-1/2" Conduit Size Punch
1-1/2" Conduit Size Die
2" Conduit Size Punch
2" Conduit Size Die
2-1/2" Conduit Size Punch
2-1/2" Conduit Size Die
3" Conduit Size Punch
3" Conduit Size Die
3-1/2" Conduit Size Punch
3-1/2" Conduit Size Die
4" Conduit Size Punch
4" Conduit Size Die
Actual
ø inch
ø mm
Tel: 800.435.0786
Fax: 800.451.2632
UPC No. Description
Kit Cat./UPC No.
Holemaking
Cat. No.
Punches & Dies
Conduit
& Pipe
Size
MADE FOR THE TRADE!™
KNOCKOUT PARTS CABINETS
Knockout Punch Parts Assortment Cabinets
• Includes balanced stock of replacement parts in sturdy steel cabinets.
Holemaking
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Description
7360SB
34358
7361SB
34359
Knockout Punch Parts Assortment 1/2" - 2". Includes Metal
Cabinet 14" High, 13" Wide and 14-3/4" Deep, with 4 Drawers.
Knockout Punch Parts Assortment 1/2" - 3". Includes Metal
Cabinet 19-1/2" High, 27" Wide and 15" Deep with 4 Drawers.
Cat. No.
UPC No.
Description
721-1/2
31756
Slug-Buster 1/2" Conduit Punch
18
14722
14722
1/2" Conduit Die
12
721-3/4
31757
Slug-Buster® 3/4" Conduit Punch
6
124AV
06972
3/4" Conduit Die
6
721-1
31758
Slug-Buster 1" Conduit Punch
6
126AV
04011
1" Conduit Die
6
721-1-1/4
31759
Slug-Buster® 1-1/4" Conduit Punch
6
128AV
04013
1-1/4" Conduit Die
6
721-1-1/2
31760
Slug-Buster 1-1/2" Conduit Punch
3
440AV
04061
1-1/2" Conduit Die
3
721-2
31761
Slug-Buster® 2" Conduit Punch
3
442AV
04063
2" Conduit Die
2
1429AV
04175
2-1/2" Conduit Punch
1
1430AV
04177
2-1/2" Conduit Die
1
1431AV
04180
3" Conduit Punch
1
1432AV
04183
3" Conduit Die
1
00042
00042
3/8" Draw Stud
12
249AVBB
04040
3/4" Drive Screw
8
7360SB/34358 Parts Cabinet Includes
304AVBB
04042
3/4" Drive Screw
6
Cat. No.
UPC No. Description
Qty.
1434AV
04188
5-1/2" x 3/4" Drive Screw
1
721-1/2
31756
18
1433AVBB
04187
1" Ball Bearing Nut
1
12
12097
12097
3/8" Adapter Screw
6
6
30227
30227
7/16" Adapter Screw
2
12099
3/4" Ball Bearing Adapter Screw
2
7360SB
Slug-Buster® 1/2" Conduit Punch
14722
14722
1/2" Conduit Die
721-3/4
31757
Slug-Buster 3/4" Conduit Punch
®
Qty.
®
®
®
124AV
06972
3/4" Conduit Die
6
12099
721-1
31758
Slug-Buster® 1" Conduit Punch
3
20963
20963
3/8" Draw Stud
20
3
2113B
10109
3/4" Draw Stud
6
3
1557AA
03170
1-1/8" Punch Sleeve
1
04686
3-1/2", 4" & 5" Conduit Bushing
1
126AV
04011
1" Conduit Die
721-1-1/4
31759
Slug-Buster 1-1/4" Conduit Punch
®
128AV
04013
1-1/4" Conduit Die
3
3037AV
721-1-1/2
31760
Slug-Buster® 1-1/2" Conduit Punch
2
1924AA
03248
Short Spacer
4
2
1925AA
03249
Medium Spacer
4
2
1926AA
06904
Long Spacer
4
1
28154
28154
Punch 1/2" HD Slug-Splitter SC™
1
12
28155
28155
Die 1/2" HD Slug-Splitter SC
1
4
29451
29451
Draw Stud, 7/16" Stainless Steel
1
4
31834
31834
Cabinet A only (top)
1
31849
31849
Cabinet B only (bottom)
1
440AV
04061
1-1/2" Conduit Die
721-2
31761
Slug-Buster 2" Conduit Punch
442AV
Tel: 800.435.0786
Fax: 800.451.2632
UPC No.
7361SB/34359 Parts Cabinet Includes
7361SB
70
Cat. No.
00042
249AVBB
304AVBB
04063
00042
04040
04042
®
2" Conduit Die
3/8" Drive Screw
3/4" Drive Screw
3/4" Drive Screw
12097
12097
3/8" Adapter Screw
4
20963
20963
3/8" Draw Stud
20
2113B
10109
3/4" Draw Stud
4
31832
31832
Cabinet only
1
™
www.greenlee.com
C-FRAME PUNCHES
1731 & 1732 Portable C-Frame Punch Drivers
1731
1732
C-Frame with Ram
Punch Adapter - 3/8" ø x 1/2" (9.5 mm)
Punch Adapter - 3/4" ø x 1" (19.0 mm)
Punch Adapter - 3/8" ø x 1/2" (9.5 mm)
Punch Adapter - 3/4" ø x 1" (19.0 mm)
Punch Adapter - 1-1/8" ø (28.6 mm)
1/2" Conduit Size Punch
3/4" Conduit Size Punch
1" Conduit Size Punch
C-Frame 1/2" Conduit Size Die
C-Frame 3/4" Conduit Size Die
C-Frame 1" Conduit Size Die
1725 Hydraulic Foot Pump
Steel Case
High Pressure Hose Unit - 1/4" x 3'
(includes 1 each of the following 3 items:)
- 1/4" Male Coupler
- Dust Cap
- High Pressure Hose, 1/4" x 3'
Die Adapter - 3/8" ø (9.5 mm)
Die Adapter - 3/4" ø (19.0 mm)
Die Adapter - 1-1/8" ø (28.6 mm)
Hydraulic Hand Pump
Hydraulic Hand Pump
Hydraulic Hose - 1/4" x 10' (3 m)
Hydraulic Hose - 3/8" x 6' (9.5 mm x 1.8)
Metal Case
Nut - 3/4" - 10 (19.0 mm)
Frame
Ram
Quick Disconnect
C-Frame
Packing Kit
Kit Cat/UPC.No.
1731F1725/
25169
1732/
27361
1732H755/
27362
1/2"
3/4"
1"
1/2"
3/4"
1"
16
21
-
16
21
-
22.5
28.3
34.6
22.5
28.3
34.6
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
1731 & 1732 Portable C-Frame Punch Drivers
SPECIFICATIONS
Capacity
1731: Up through 10 gauge (3.0 mm) mild steel with Greenlee
special C-Frame dies and standard punches; 1/2" through 1"
conduit and 15.2 mm through 30.5 mm
1732: Up through 10 gauge (3.0 mm) mild steel with Greenlee
Standard punches and dies; 1/2" through 4" conduit and 15.2 mm
through 115.4 mm.
= new product
= Replacement Part
= Accessory
71
INTERNATIONAL
1732
• Use with 1/2" through 4" conduit size and other round sizes only.
• Use with Greenlee standard round punches and dies (optional).
Weight
Cat. No. UPC No. Description lbs. kg.
1731
15911 Driver with Ram, 1/2" Through
1" Conduit (22.5 mm through 34.6 mm)
Punches and Dies 32 15
1732
27361 Driver with Ram, 3/8", 3/4"
and 1-1/8" Punch and Die Adapters 59 27
1731H767 20486 Same as 1731 with 767
Hydraulic Hand Pump 36 17
1731F1725 25169 Same as 1731 with 1725
Hydraulic Foot Pump 43 20
21316
21316 Pg-9 (15.2 mm) Punch (optional)
18557
18557 Pg-9 (15.2 mm) Die (optional)
17700
17700 Pg-11 (18.6 mm) Punch (optional)
18558
18558 Pg-11 (18.6 mm) Die (optional)
17697
17697 Pg-13 (20.4 mm) Punch (optional)
18559
18559 Pg-13 (20.4 mm) Die (optional)
36282
36282 1-7/32" (30.5 mm) Oil Tight Punch (optional)
37103
37103 1-7/32" (30.5 mm) Oil Tight Die (optional)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Fast, one-shot punching, no predrilling of pilot holes.
• Throat measures 8" (203 mm) deep.
1731
• Great for punching junction boxes and small enclosures.
• Punch can be used with ram inside or outside of the junction box.
• For use with 1/2" – 1" (22.5 mm – 34.6 mm) conduit size and accessory sizes only.
CANADA
13266
13267
13276
13277
13268
04006
04008
04010
12087
12086
12085
25144
16634
38316
54169
54170
06302
11791
11790
11789
13284
15677
37729
11289
27335
50642
12079
15631
37614
11903
13814
1731H767/
20486
USA
13266
13267
13276
13277
13268
121AV
123AV
125AV
12087
12086
12085
1725
16634
38316
54169
54170
06302
11791
11790
11789
767
755
37729
11289
27335
50642
12079
15631
37614
11903
13814
HOle Size
1731/
Pg ø mm 15911
Size
Tel: 800.435.0786
Fax: 800.524.2853
Description
Tel: 800.435.0786
Fax: 800.451.2632
UPC No.
Holemaking
Cat. No.
MADE FOR THE TRADE!™
SPECIAL APPLICATION PUNCHES
Oiltight Punches with Notches
Other oiltight sizes without notches available in standard, Slug-Buster® and Slug-Splitter® designs.
Holemaking
Counter
Nut
Hole Size
A
Inch
B
C
A
mm
B
C
Ball Bearing
Drive Nut
Optional
BB
Minimum
Adapter for
Drive Counter Pilot Hole Weight Hydraulic
Nut
Nut
Inch mm lbs. kg. Drivers
2.0 Hand/Hydr.
60238
60239 60250 60117 60165 60258 .625 15.9 2.1 .95
60167p
1.210 .190 1.380 30.5 4.8 36.0 10
3.5 Hand/Hydr.
60242
60243 60249 60117 60165 60258 .625 15.9 2.7 1.2
60167p
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers.
Key Punches
Hole Size
A
Inch
B
C
A
mm
B
Die
Punch
Draw Stud
Ball Bearing
Drive Nut
Cat./UPC No.
Punch Unit
Optional
Maximum
Capacity
(Includes
BB
Minimum
Adapter for
Mild Steel Operation Punch, Die, Draw
Draw Drive Counter Pilot Hole Weight Hydraulic
C GA mm
Type
Stud and Nuts) Punch Die
Stud Nut
Nut Inch mm lbs. kg. Drivers
0.481 0.055 .030 12.2 1.4 .8
16
1.171 0.123 .097 29.7 3.1 2.5 14
1.265 0.156 .097 32.1 4.0 2.5 14
1.328 0.102 .097 33.7 2.6 2.5 14
1.5
2.0
2.0
2.0
Hand/Hydr.
Hand/Hydr.
Hand/Hydr.
Hand/Hydr.
60101
60104
60107
60110
60102
60105
60108
60111
60103
60106
60109
60112
60115
60166
60166
60166
pFor use with any Greenlee Hydraulic Driver or Battery-Powered Driver. For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
60120
60165
60165
60165
05244
60258
60258
60258
.375
.875
.875
.875
9.5
23.8
23.8
23.8
.88
2.3
2.4
2.4
.4
1.0
1.1
1.1
60114p
60167p
60167p
60167p
720 Keyway Punch
• Eliminates time-consuming hand sawing and filing when making keyways
for push-button switches.
• Use as a nibbler to make wider or deeper keyways.
• Punches 1/8" (3.2 mm) or 3/16" (4.8 mm) keyways for 7/8" (22.5 mm) or
1-7/32" (30.5 mm) push-button holes.
• U.S. Patent No. 4,375,128; Canadian Patent No. 1,172,435.
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
Draw Stud
.875 .125 1.000 22.5 3.2 25.4 14
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Die
Maximum
Cat./UPC No.
Capacity
Punch Unit
Mild Steel Operation (Includes Punch, Die
Draw
GA mm
Type Draw Stud and NUTS) Punch Die
Stud
Counter
Nut
CANADA
Punch
Cat. No.
UPC No. Description
720
26534
26538
26534
26536
26538
Weight
lbs. kg.
Keyway Punch
Punch
Die
2.8 1.27
USA
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
Operation
Capacity
NOTE: Not for Stainless Steel
Manual
10 gauge (3.5 mm) mild steel
3/16"
Cutting Notch
3/16" Key
1/8" Deep
Punch
Cutting Notch
1/8" Key
1/8"
72
Die
3/32" Deep
1. Locate proper cutting notch on the
cutting head.
2. Place cutting notch inside edge of hole and
cut keyway.
3. Withdraw the punch.
4. Use as a nibbler to make wider or
deeper keyways.
www.greenlee.com
“D” Punches
Counter
Nut
Punch
Cat./UPC No.
Maximum
Punch Unit
Capacity
(Includes
Mild Steel Operation Punch, Die, Draw
GA mm
Type Stud and NUTS) Punch
Hole Size
Inch
mm
A
B
A
B
0.469
0.594
0.703
12.7
15.9
19.1
11.9
15.1
17.9
16
14
14
2.0
2.0
2.0
Hand/Hydr.
Hand/Hydr.
Hand/Hydr.
p For use with any Greenlee Hydraulic Driver or Battery-Powered Driver
60077
61080**
61083**
Draw
Stud
Die
60078 60079 60115 60120
34421 34733
34421 34733
Double “D” Punches
Counter
Nut
A
B
A
B
0.769
0.795
0.913
0.913
1.375
0.642
0.697
0.756
0.795
1.125
19.5
20.2
23.2
23.2
34.9
16.3
17.6
19.2
20.2
28.6
05244
04638
04638
.375
.500
.500
60114p
33967p
33967p
9.5 .9 .41
12.7 1.1 .50
12.7 1.2 .50
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
** Sold as Unit only
Optional
BB
Minimum
Adapter for
Drive Counter Pilot Hole Weight Hydraulic
Nut
Nut Inch mm lbs. kg. Drivers
Punch
Die
Draw Stud
Holemaking
0.500
0.625
0.750
Ball Bearing
Drive Nut
Cat./UPC No.
Hole Size
Inch
mm
Maximum
Capacity
Mild Steel Operation
GA mm
Type
14
14
14
14
14
p For use with any Greenlee Hydraulic Driver or Battery-Powered Driver
2.0
2.0
2.0
2.0
2.0
Punch Unit
(Includes
Punch, Die, Draw
Stud and nuts)
61086**
61089**
61092**
61095**
60098**
Hand/Hydr.
Hand/Hydr.
Hand/Hydr.
Hand/Hydr.
Hand/Hydr.
Draw
Stud
BB
Drive
Nut
Counter
Nut
34421
34421
34421
34421
60166
34733
34733
34733
34733
60165
04638
04638
04638
04638
60258
pHand/Hydr.
Ball Bearing
Drive Nut
Draw Stud
Die
16
1.5
15.9 x 15.9
14
2.0
3/4"
19.1 x 19.1
14
2.0
7/8"
0.882 x 0.882
22.4 x 22.4
14
2.0
0.945 x 0.945
24.0 x 24.0
14
2.0
1"
1.000 x 1.000
25.4 x 25.4
14
2.0
1.772 x 1.772
45.0 x 45.0
10
3.5
1-13/16" 1.811 x 1.811
46.0 x 46.0
10
3.5
2.000 x 2.000
50.8 x 50.8
10
3.5
2-11/16" 2.677 x 2.677
68.0 x 68.0
10
3.5
pHydr.
3-5/8" 3.622 x 3.622
92.0 x 92.0
10
4-1/8" 4.125 x 4.125
pHand/Hydr.
pHand/Hydr.
pHand/Hydr.
pHand/Hydr.
60001
60002 60003 60115
60120
05244
.375
9.5 1.1 .50
61004
60005 60006 34421
34733
04638
.500
12.7 1.5 .68
61007**
34421
34733
04638
.500
12.7 1.5 .68
61010**
34421
34733
04638
.500
12.7 1.8 .82
61013**
34421
34733
04638
.500
12.7 2.3 1.0
60114p
33967p
33967p
33967p
33967p
pHand/Hydr.
60016
60017 60018 60117
60165
60258
.625
15.9 2.4 1.1
Only
60287
60288 60289 60118
60235
1.188
30.2 6.0 2.7
Only
60019
60020 60021 60118
60235
1.188
30.2 6.2 2.8
Only
60168
60169 60170 60118
60235
1.188
30.2 6.9 3.1
Only
60171
60172 60173 60118
60235
1.188
30.2 10.1 4.6
p
3.5
*Hydr. Only
60174
60175 60176 60118
60235
1.188
30.2 14.8 6.7
*
104.8 x 104.8 10
3.5
*Hydr. Only
60177
60178 60179 60118
60235
1.188
30.2 18.8 8.5
*
138.0 x 138.0 14
2.0
*Hydr. Only
60234
60023 60024 60118
—
—
—
—
—
—
—
60235
1.188
30.2 20 9.1
*
2.0
Hand/Hydr.
61125**
34733
04638
.500
12.7 .7
pHydr.
pHydr.
pHydr.
60167p
p
p
p
SPECIAL SQUARE
0.886(A)
0.791(B)
22.5 Ø(A) 20.1(B) 14
*For use with with Hand and Foot Pump Hydraulic Drivers with Ram
** Sold as Unit only
= new product
= Replacement Part
p For use with any Greenlee Hydraulic Driver or Battery-Powered Driver
= Accessory
34421
.3
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
33967
73
INTERNATIONAL
12.7 x 12.7
5/8" 0.625 x 0.625
5.433 x 5.433
Punch
Tel: +1.815.397.7070
Fax: +1.815.397.9247
1/2" 0.500 x 0.500
2"
33967p
33967p
33967p
33967p
60167p
Cat./UPC No.
Maximum
Punch Unit
Optional
Capacity
(Includes
BB
Minimum
Adapter for
Mild Steel Operation Punch, Die, Draw
Draw Drive Counter Pilot Hole Weight Hydraulic
GA mm
Type
Stud and Nuts) Punch Die Stud
Nut
Nut
Inch mm lbs. kg
Drivers
0.750 x 0.750
.50
.50
.54
.9
1.1
CANADA
1.1
1.1
1.2
2
2.5
Tel: 800.435.0786
Fax: 800.524.2853
Hole Size
Inch
mm
12.7
12.7
12.7
12.7
23.8
Tel: 800.435.0786
Fax: 800.451.2632
Counter
Nut
Special Square
.500
.500
.500
.500
.875
USA
Square
Optional
Minimum
Adapter for
Pilot Hole Weight Hydraulic
Inch mm lbs. kg. Drivers
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
** Sold as Unit only
Square and Special Square Punches
Ball Bearing
Drive Nut
Draw Stud
Die
MADE FOR THE TRADE!™
Rectangular Punches
Rectangle
Counter
Nut
Holemaking
Hole Size
Inch
mm
0.437 x 0.875
0.670 x 0.749
0.750 x 1.140
0.750 x 1.310
0.861 x 1.018
0.866 x 1.181
0.866 x 1.654
0.990 x 1.140
1.250 x 1.380
1.312 x 2.625
1.378 x 2.047
1.378 x 2.559
1.378 x 3.228
1.378 x 4.409
1.811 x 3.622
2.250 x 3.500
2.677 x 5.433
11.1 x 22.2
17.0 x 19.0
19.1 x 29.0
19.1 x 33.3
21.9 x 25.9
22.0 x 30.0
22.0 x 42.0
25.1 x 29.0
31.8 x 35.1
33.3 x 67.9
35.0 x 52.0
35.0 x 65.0
35.0 x 82.0
35.0 x 112.0
46.0 x 92.0
57.2 x 88.9
68.0 x 138.0
Punch
Die
Cat./UPC No.
Maximum
Punch Unit
Capacity
(Includes
Mild Steel Operation Punch, Die, Draw
Draw
GA mm
Type
Studs AND NUTS) Punch
Die
Stud
16
14
14
14
14
14
14
14
14
10
10
10
14
14
10
10
14
1.5
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.5
3.5
3.5
2.0
2.0
3.5
3.5
2.0
pHand/Hydr.
pHand/Hydr.
pHand/Hydr.
pHand/Hydr.
pHand/Hydr.
pHand/Hydr.
pHand/Hydr.
pHand/Hydr.
pHand/Hydr.
pHydr.
Only
Only
pHydr. Only
*Hydr. Only
*Hydr. Only
*Hydr. Only
*Hydr. Only
*Hydr. Only
pHydr.
60025
61028
60031
60034
60037
60040
60043
60047
60050
60053
60056
60059
60062
60065
60068
60071
60074
*For use with with Hand and Foot Pump Hydraulic Drivers with Ram
pFor use with any Greenlee Hydraulic Driver or Battery-Powered Driver
60026
60029
60032
60035
60038
60041
60045
60048
60051
60054
60057
60060
60063
60066
60069
60072
60075
60027
60030
60033
60036
60039
60042
60046
60049
60052
60055
60058
60061
60064
60067
60070
60073
60076
60115
34421
60117
60117
60117
60117
60117
60117
60117
60118
60118
60118
60118
60118
60118
60118
60118
Draw Stud
Ball Bearing
Drive Nut
Optional
BB
Minimum
Adapter for
Drive Counter Pilot Hole Ø Weight
Hydraulic
Nut
Nut Inch mm lbs. kg
Drivers
60120
34733
60165
60165
60165
60165
60165
60165
60165
—
—
—
—
—
—
—
—
05244
04638
60258
60258
60258
60258
60258
60258
60258
60235
60235
60235
60235
60235
60235
60235
60235
.375
.500
.625
.625
.625
.625
.625
.625
.625
1.188
1.188
1.188
1.188
1.188
1.188
1.188
1.188
9.5 1.2 .5
12.7 1.5 .68
15.9 2.3 1.0
15.9 2.3 1.0
15.9 2.3 1.0
15.9 2.4 1.1
15.9 2.9 1.3
15.9 2.6 1.2
15.9 3.1 1.4
30.2 5.1 2.3
30.2 6.1 2.8
30.2 6.8 3.1
30.2 7.7 3.5
30.2 9.2 4.2
30.2 8.9 4.0
30.2 10.1 4.6
30.2 16.1 7.3
60114p
33967p
60167p
60167p
60167p
60167p
60167p
60167p
60167p
p
p
p
*
*
*
*
*
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
• Cut-out and mounting slots are punched in one operation.
• Drill only one 7/16" (11.1 mm) pilot hole. (See page 82 for Kwik Stepper®
step bits.)
• Fast, accurate panel punching with no sawing or filing required.
• Universal size punches for front or back mount of TRW Cinch and ITT
Cannon-type or equivalent connectors in 9, 15, 25, 37 or 50-pin
configurations.
• U.S. Patent No. 4,899,447
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Electronic Connector Panel Punches
74
SPECIFICATIONS
Capacity
Operation
Punch Unit
No. of
Cat. No.
UPC No. Pins
Dimensions
A
B
C
16 gauge (1.5 mm) mild steel; 10 gauge (3.5 mm) aluminum
Manual with a wrench; Quick Draw® and Quick Draw 90® hydraulic
drivers, Battery Driver, Ram and Pump hydraulic drivers aluminum
Replacement Cat./UPC No.
Weight
Square
Punch Die Unit Draw Stud Counter Nut Drive Nut lbs. kg.
229
34436
9
.787"
(20.0 mm)
.982"
(24.9 mm)
.469"
(11.9 mm)
34441
35196
34421
04638
34733
1.4
.64
231
34437
15
1.127"
(28.6 mm)
1.309"
(33.3 mm)
.469"
(11.9 mm)
34442
35197
34421
04638
34733
1.5
.68
RS232
34420
25
1.655"
(42.0 mm)
1.853"
(47.1 mm)
.469"
(11.9 mm)
34418
35198
34421
04638
34733
2.0
.91
234
34429
37
2.296"
(58.3 mm)
2.497"
(63.4 mm)
.469"
(11.9 mm)
34427
35199
34421
04638
34733
2.0
.91
238
34444
50
2.201"
(55.9 mm)
2.402"
(61.0 mm)
.579"
(14.7 mm)
34443
35200
34421
04638
34733
2.0
.91
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers
www.greenlee.com
DRAW STUDS FOR KNOCKOUTS
Replacement Draw Studs for Manual Drivers
Replacement Draw Stud Selection Guide
Refer to the ACTUAL SIZE pictures and information below when ordering a
replacement draw stud. Sizes given are diameter X length.
Holemaking
304AVBB – 3/4" (19.0 mm) x 2-15/16" (75 mm)
00042 – 3/8" (9.5 mm) x 1-5/8" (41 mm)
= new product
= Replacement Part
= Accessory
1434AV
3/4" (19.0 mm) x
5-1/2" (140 mm)
75
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
1675AV Draw Stud – 1/4" (6.4 mm) x 1-3/8" (35 mm)
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
3026AV –
1-1/8" (28.6 mm) x 7-1/2" (190 mm)
USA
Tel: 800.435.0786
Fax: 800.451.2632
249AVBB – 3/4" (19.0 mm) x 2-1/8" (54 mm)
MADE FOR THE TRADE!™
Replacement Draw Studs for Hydraulic Drivers
Holemaking
Replacement Draw Stud Selection Guide
Refer to the ACTUAL SIZE pictures and information below when ordering a replacement draw stud.
Sizes given are diameter X length.
1557AA– 1-1/8" (28.6 mm) x 3" (76 mm)
60114 (Adapter) – 3/4" (19 mm) x 1/4" (6.35 mm) internal
1614SS– 3/8" (9.5 mm) x 2-13/16" (71 mm)
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
CANADA
60167 (Adapter) – 3/4" (19 mm) x 1/2" (12.7 mm) internal
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
33967 (Adapter) – 3/4" (19 mm) x 3/8" (9.5 mm) internal
76
2113B – 3/4” (19.0 mm)
x 8” (203 mm)
20963 – 3/8" (9.5 mm)
x 7.9" (201 mm)
www.greenlee.com
Replacement Draw Studs for Hydraulic Drivers (continued)
31872 – 3/4" (19 mm) x 4-1/2" (114.3 mm)
Holemaking
29451 – 7/16" (11.1 mm) x 4-1/4" (108 mm)
29452 – 3/4" (19.0 mm) x 5-1/2" (140 mm)
Replacement Draw Studs for Ratchet Drivers
= Replacement Part
= Accessory
77
INTERNATIONAL
12097 – 3/8" (9.5 mm) x 3-1/2" (89 mm)
CANADA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
30227 – 7/16" (11.1 mm) x 3-5/8" (92 mm)
USA
Tel: 800.435.0786
Fax: 800.524.2853
12099 – 3/4" (19.0 mm) x 4-3/4" (121 mm)
= new product
Tel: 800.435.0786
Fax: 800.451.2632
Replacement Draw Stud Selection Guide
Refer to the ACTUAL SIZE pictures and information below when ordering a replacement draw stud.
Sizes given are diameter X length.
MADE FOR THE TRADE!™
Replacement Draw Studs for Special Shape Punches
Replacement Draw Stud Selection Guide
Refer to the ACTUAL SIZE pictures and information below when ordering
a replacement draw stud. Sizes given are diameter X length.
Holemaking
For maximum draw stud life, Greenlee recommends the use of battery or hydraulic drivers.
60166 – 1/2" (12.7 mm) x 4-5/8" (117.5 mm)
60117 – 1/2" (12.7 mm) x 4-5/8" (117.5 mm)
34421 – 3/8" (9.5 mm) x 3-1/2" (88.9 mm)
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
60116 – 1/2" (12.7 mm) x 4-5/8" (117.5 mm)
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
60115 – 1/4" (6.3 mm) x 3-7/16" (87.3 mm)
78
60118 – 3/4" (19 mm)
x 6-3/4" (171.5 mm)
www.greenlee.com
STUD PUNCHES
Structural Stud Punch
Holemaking
• Punch 16 and 18 gauge structural studs in 5 seconds.
• Punch 200 holes per battery charge, 2 batteries & charger included,
eliminating downtime.
• Punches a 1.34 (34.1 mm) diameter hole in 16 (1.5 mm) gauge steel.
For use with Greenlee 712A bushings.
• Swivel head rotates 360° for use in tight corners.
• Pistol grip handle gives better leverage and reduces fatigue.
• Replacement punch and die.
• Lightweight 9.2 lb. tool provides heavy-duty performance.
BATTERY-POWERED STUD PUNCH
actual hole size
CAT. NO.
UPC NO.
ESP710-11
Weight
length
height
capacity
IN.
mm
LBS.
kg
IN.
mm
IN.
mm
GA
mm
BATTERY
CHARGER
10307
1-11/32
34.1
9.2
4.2
15
381
11-3/4
298
16
1.5
12V2.0 Ah NiCd
120 Volt
ESP710-12
10308
1-11/32
34.1
9.2
4.2
15
381
11-3/4
298
16
1.5
12V2.0 Ah NiCd
12 Volt
ESP710-22
10309
1-11/32
34.1
9.2
4.2
15
381
11-3/4
298
16
1.5
12V2.0 Ah NiCd
230 Volt
Description
Cat. No.
UPC No.
Description
12274
07063
MKESP710GL
03046
12274
07063
10303
03046
Carrying Strap
12V NIMH battery
Carrying Case
120V Charger
03048
03047
HE.9055
21297
03048
03047
10344
21297
12V Charger
230V Charger
Replacement Punch
Replacement Die
Plumber Stud Punch
08377
08379
08375
55316
08377
08379
08375
55316
Punch for 713
Die for 713
Link
Pin, Groove .31 x 1.75
PLUMBER STUD PUNCH
actual hole size
CAT. NO.
UPC NO.
713
06430
= new product
Weight
length
height
capacity
IN.
mm
LBS.
kg
IN.
mm
IN.
mm
GA
mm
2-5/8
66.7
10.6
4.8
23-1/2
596
9-3/4
247
24-20
0.9
= Replacement Part
= Accessory
79
INTERNATIONAL
Description
CANADA
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Punches 2-5/8" (66.7 mm) diameter hole in metal studs for
professional-looking installation of 2" water, vent, waste pipes.
• Two-speed lever action for fast, easy punching of 24 to 20 gauge thick
metal studs.
• 2-1/8" (54 mm) throat width fits over most studs and channels.
• High strength alloy aluminum c-frame and handle provides lightweight
tool for easy handling–10.6 lb. (4.8 kg).
• Lever action punch retraction strips punch out of metal stud fast and easy.
Patent #6,647,630
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
MADE FOR THE TRADE!™
Metal Stud Punches
Holemaking
• Punch up through 20 gauge (0.9 mm) steel studs in one stroke.
• Aluminum head provides strength with minimum weight,
reducing operator fatigue.
• Contoured handle design gives better operator leverage and makes
it possible to punch in tight places.
• Self-stripping design eliminates punch hang-ups.
• Automatically centers holes on standard studs.
• Conversion kit available to upgrade early models from 24 gauge to 20
gauge maximum capacity.
SPECIFICATIONS
Capacity
709 - 1-5/8" (41.3 mm) and wider studs.
20 gauge (0.9 mm) steel studs.
710 - 2-1/2" (63.4 mm) and wider studs.
20 gauge (0.9 mm) steel studs.
Bushings for Metal Stud Punches
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
Weight
lbs. kg
709
22280
7/8" (22.2 mm) Diameter Stud Punch
7
3.2
710
21285
1-11/32" (34.1 mm) Diameter Stud Punch
7.5
3.5
30968
30968
Conversion Kit – Upgrades Early Model 709
or 710 from 24 to 20 Gauge Maximum Capacity
121AV
04006
Punch for 709
22286
22286
Die for 709
24823
24823
Punch for 710
21297
21297
Die for 710
06015
06015
Pin Kit
36617
36617
Link
05932
05932
Link and Pin Kit (709/710)
21557
21557
Compression Spring
• Triple lock design holds bushing securely.
• Locks securely into metal studs from 24 gauge to 12 gauge (0.6 mm
to 2.5 mm).
• Helps protect wire insulation from sharp edges of metal studs.
• Makes pulling smooth and easy by preventing hang-ups of cable
on raw metal edges.
¨
80
Cat. No. UPC No. Description
Manual Stud Punch
Cat. No.
UPC No. Description
711C
711M
712A100
712A1000
22288
22289
05927
05928
Weight
lbs. kg
100 Bushings for Hole Punched by 709 for
.5
7/8" (22.2 mm) Diameter Hole
1,000 Bushings for Hole Punched by 709 for
3.7
7/8" (22.2 mm) Diameter Hole
100 Bushings for Pre-Punched Hole or 1-11/32" 1.4
(34.1 mm) Diameter Hole Punched by 710
1,000 Bushings for Pre-Punched Hole or
15.5
1-11/32" (34.1 mm) Diameter Hole Punched by 710
.23
1.7
.64
7.0
• Punch up through 20 gauge (0.9 mm) steel studs in one stroke.
• Unique patented punch rolls the edge over for smooth installation of
armored cable; cable won’t hang up.
• Contoured handle design gives better operator leverage and makes it
possible to punch in tight places.
• Automatically centers holes on standard studs.
manual STUD PUNCH
actual hole size
CAT. NO.
UPC NO.
724
10415
Weight
length
height
capacity
IN.
mm
LBS.
kg
IN.
mm
IN.
mm
GA
mm
1-1/4
31.7
4.0
1.8
16-3/4
426
4-1/2
114
24-20
0.9
Cat. No.
UPC No.
Description
10419
10419
Punch for 724
www.greenlee.com
DRILL/TAPS
Combination Drill/Tap Bits
cat. no.
upc no.
description
DTAPKITM
DTAPKIT
12151
17620
M3-M10 6 Piece Drill/Tap Set
6-32 to 1/4-20 6-piece Drill
Tap Set
DTAP6-32
DTAP8-32
DTAP10-24
DTAP10-32
DTAP12-24
DTAP1/4-20
DTAP5/16-18
DTAP3/8-16
DTAPM3C
DTAPM4C
DTAPM5C
DTAPM6C
DTAPM8C
DTAPM10C
17611
17612
17613
17614
17615
17616
11627
11628
12160
12161
12162
12163
12164
12165
6-32NC Drill/Tap Bit
8-32NC Drill/Tap Bit
10-24NC Drill/Tap Bit
10-32NF Drill/Tap Bit
12-24NC Drill/Tap Bit
1/4-20NC Drill/Tap Bit
5/16-18NC Drill/Tap Bit
3/8-16NC Drill/Tap Bit
M3 X .50 Drill/Tap Bit
M4 X .70 Drill/Tap Bit
M5 X .80 Drill/Tap Bit
M6 X 1.00 Drill/Tap Bit
M8 X 1.25 Drill/Tap Bit
M10 X 1.50 Drill/Tap Bit
Up to 10 gauge
Mild steel, copper, brass, aluminum
Shank
Drill Material
Drill point
1/4" quick change hex
High-speed steel
Split point with web thinning
X
X
X
X
X
X
= Accessory
81
INTERNATIONAL
= Replacement Part
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
NOTE: To extend the life of your tool, see Cutting/Threading Oil on page 435.
USA
DTAPKITM
Material thickness
Material type
X
X
X
X
X
X
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
dtapkit dtapkitM
Holemaking
• Complete hole drilling, tapping and deburring/countersinking in one
operation with power drill saves labor and time.
• Back tapered beyond tap to prevent thread damage from over-drilling.
• Deburr/countersink also provided on bit beyond back taper.
• Made from hardened high-speed steel vs. carbon steel for longer life.
• High quality hex shank to ensure strong connection to drill chuck.
• Designed to tap up to 10-gauge metal.
• Quick change adaptor included in both metric and standard kits.
MADE FOR THE TRADE!™
STEP BITS
Kwik Stepper® Step Bits
• Unique split-tip design penetrates through steel faster.
• Resists walking or skidding, even on round surfaces.
• Balanced, double-flute construction requires less pressure, does the work for you.
• Designed and manufactured in USA.
35884
Holemaking
03607
From 1/8" through 1-3/8" (3.2 - 34.9 mm)
Cut up through 3/8" (9.5 mm) mild steel, copper, brass,
aluminum, wood, plastic and laminates
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
CANADA
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Size
Inches
Tel: 800.435.0786
Fax: 800.451.2632
Description
35884
03607
35884
03607
Kwik Stepper® Step Bit Kit
Kwik Stepper® Step Bit Kit
UPC No.
34401
34403
30008
35936
Description
1/2" Multi-Hole Step Bit
7/8" Multi-Hole Step Bit
1-1/8" Multi-Hole Step Bit
Plastic Case
Single-hole bits are
designed to drill one
indicated hole size
through a series of steps
from bit tip to full size.
Multi-hole bits allow you
to drill a hole in any of
the stated diameters.
82
UPC No.
Cat. No.
34401
34403
30008
35936
SPECIFICATIONS
Hole Sizes
Capacity
Cat. No.
mm
1/8
3.2
5/32"
4.0
3/16"
4.8
7/32"
5.6
1/4"
6.4
9/32"
7.1
5/16"
7.9
11/32"
8.7
3/8"
9.5
0.382"
9.7
13/32"
10.3
7/16"
11.1
15/32"
11.9
0.492"
12.5
1/2"
12.7
9/16"
14.3
0.598"
15.2
5/8"
15.9
0.638"
16.2
11/16"
17.5
0.732"
18.6
3/4"
19.1
0.803"
20.4
13/16"
20.6
7/8"
22.2
0.886"
22.5
1.00"
25.4
1.114"
28.3
1-1/8"
28.6
1.201"
30.5
1-7/32"
31.0
1-1/4"
31.8
1.280"
32.5
1-3/8"
34.9
Overall Length
Minimum
Chuck Size
Maximum Material
Thickness
Bit Extension
03607
•
•
•
35884
•
•
•
•
METRIC
1/2"
(12.7 mm)
Single-Hole
Step Bit
1/2"
(12.7 mm)
Multi-Hole
Step Bit
1/2"
(12.7 mm)
Multi-Hole
Step Bit
13/16"
(20.6 mm)
Multi-Hole
Step Bit
7/8"
(22.2 mm)
Single-Hole
Step Bit
7/8"
1-1/8"
(22.2 mm) Electrician’s
Multi-Hole
Step Bit
Step Bit
1-3/8"
(34.9 mm)
Multi-Hole
Step Bit
9.7 mm
(.382")
Multi-Hole
Step Bit
30.5 mm
(1.201")
Multi-Hole
Step Bit
32.5 mm
(1.280")
34410
34401
36402
30005
✓
✓
✓
✓
✓
✓
✓
✓
✓
30008
36414
36018
36020
36022
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓ Pg-7
✓
✓
✓
1-7/8"
(47.6 mm)
3/8"
(9.5 mm)
10 gauge
(3.5 mm)
3-3/8"
(85.7 mm)
3/8"
(9.5 mm)
10 gauge
(3.5 mm)
✓ Pg-9
✓ Pg-11
✓ Pg-13
✓
✓
✓ Pg-16
✓ ISO-25
✓
✓
✓
✓
✓
✓ISO-32
901
901
Cat./UPC No.
34411
34403
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
3-7/16"
3-7/16"
2-7/16"
3-9/16"
(87.3 mm) (87.3 mm) (61.9 mm) (90.5 mm)
3/8"
3/8"
3/8"
3/8"
9.5 mm) (9.5 mm) (9.5 mm) (9.5 mm)
3/8"
10 gauge 10 gauge 10 gauge
(9.5 mm) (3.5 mm) (3.5 mm) (3.5 mm)
901
901
—
—
2-15/16"
(74.6 mm)
3/8"
(9.5 mm)
10 gauge
(3.5 mm)
—
✓ Pg-21
✓ ISO-16
✓ ISO-20
✓
3-1/8"
1-7/8"
3-3/4"
(79.4 mm) (47.6 mm) (95.3 mm)
3/8"
3/8"
3/8"
(9.5 mm) (9.5 mm) (9.5 mm)
10 gauge 10 gauge
1/4"
(3.5 mm) (3.5 mm) (6.4 mm)
—
901
—
3-3/8"
(85.7 mm)
3/8"
(9.5 mm)
1/4"
(6.4 mm)
—
www.greenlee.com
AUGER BITS
Nail Eater® Extreme
Hole Dia.
Inch mm
1/2 12.7
5/8 15.9
11/16 17.5
3/4 19.1
13/16 20.6
7/8 22.2
15/16 23.8
1
25.4
1-1/8 28.6
1-1/4 31.8
Hex Shank
Inch mm
5/16 7.9
7/16 11.1
7/16 11.1
7/16 11.1
7/16 11.1
7/16 11.1
7/16 11.1
7/16 11.1
7/16 11.1
7/16 11.1
Weight
lbs. g
.3 137
.4 182
.5 227
.8 363
.3 137
.4 182
.5 227
.5 227
.6 273
.7 318
.9 409
1.1 499
Weight
lbs. g
.7 318
.8 363
1 454
1.2 545
1.2 545
1.5 681
1.6 726
1.8 817
2.3 1044
2.8 1270
• Quickly bore through creosoted and salt-treated utility poles.
• Resists wear, eats through nails and staples.
• Self-feeding screw point draws the bit through the wood.
• 7/16" hex shank to fit impact drivers.
• Available in 18" overall length.
= new product
= Replacement Part
= Accessory
37868
37869
37870
37871
9/16
11/16
13/16
15/16
14.3
17.5
20.6
23.8
Overall
Length
Inch mm
Hex
Shank
Inch mm
Weight
lbs. g
5/8
3/4
7/8
1
18
18
18
18
7/16
7/16
7/16
7/16
0.9
1.1
1.4
1.5
15.9
19.1
22.2
25.4
457.2
457.2
457.2
457.2
11.1
11.1
11.1
11.1
409
499
636
681
83
INTERNATIONAL
37868
37869
37870
37871
Hole
Dia.
Inch mm
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Hardware
Dia.
cat. no. UPC No. Inch mm
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Nail Eater® Extreme Impact Bits
USA
Bulk
UPC No.
—
—
—
36659
—
36662
—
36664
—
—
Hex Shank
Inch mm
5/16 7.9
5/16 7.9
5/16 7.9
5/16 7.9
7/16 11.1
7/16 11.1
7/16 11.1
7/16 11.1
7/16 11.1
7/16 11.1
7/16 11.1
7/16 11.1
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
Nail Eater® EXTREME SHORTY
Overall Length
7-5/8" (193.7 mm)
Twist Length
5" (127 mm)
Electric drill required 61 PTS – 5/8 through 61 PTS - 1, minimum
3/8" drill; All Big Shank, 1/2" drill.
Nail Eater® EXTREME
Overall Length
18" (457.2 mm)
Twist Length
15" (381 mm)
Nail Eater® EXTREME
POP
Cat. No.
UPC No.
66PT–1/2
30915
66PT–5/8
30919
66PT–11/16
30921
66PT–3/4
30923
66PT–13/16
30925
66PT–7/8
30927
66PT–15/16
30929
66PT–1
30931
66PT–1-1/8
30935
66PT–1-1/4
30937
Hole Dia.
Inch mm
5/8 15.9
3/4 19.1
7/8 22.2
1
25.4
5/8 15.9
11/16 17.5
3/4 19.1
13/16 20.6
7/8 22.2
1
25.4
1-1/8 28.6
1-1/4 31.8
Holemaking
• Improved cutting edge provides 30% longer life span.
• Patented new design for improved cutting and cleaner holes.
• Self-feeding screw point draws bit through wood.
• Unique patented design cutting angle - smoother starts,
reduced cutting loads.
• Made of super tough, heat-treated steel; cuts through nails
and provides longer life.
• “Shorty” bits - for working in tight places, yet still can go
through three abutting 2 x 4s.
• See “Bit Extensions” if more length is required (see page 84).
• P.O.P packaged
Nail Eater® EXTREME SHORTY
POP
Bulk
Cat. No.
UPC No. UPC No.
61PTS–5/8
30419 —
61PTS–3/4
30423 —
61PTS–7/8
30427 —
61PTS–1
30429 —
62PTS–5/8
31788 —
62PTS–11/16
31790 —
62PTS–3/4
31792 36640
62PTS–13/16
31794 —
62PTS–7/8
31796 36642
62PTS–1
31798 36643
61/62PTS–1-1/8 30431 —
61/62PTS–1-1/4 30433 —
MADE FOR THE TRADE!™
Stubby Auger Wood Bits
Holemaking
60A-3/4
cat. no.
UPC No.
Hole
Dia.
Inch mm
60A-5/8
60A-3/4
60A-7/8
60A-1
12416
12417
12418
10538
5/8
3/4
7/8
1
15.9
19.1
22.2
25.4
Overall
Length
Inch mm
Weight
lbs. g
4.5
4.5
4.5
4.5
0.3
0.3
0.3
0.4
144
144
144
144
118
136
149
199
• Over center single flute design for cleaner holes and less splintering.
• Unique cutting edge design for fast and smooth cutting action.
• Shorter than the top competitor’s bit for better access to tight spaces
between studs and joists.
• Perfect for drilling 2” and 4” joists.
• Augers have self-feeding screw point that draws bit through all wood
types with less operator fatigue.
• Eliminates the need for special tools such as expensive right angle drills
or multiple steps to cut the hole to size.
• 1/4” hex quick change design for fast and easy use in all drill types.
• Clearly marked with bit diameter and catalog number on shank for
easy identification.
Cat. No.
UPC No.
Description
60A-5/8
60A-3/4
60A-7/8
60A-1
12416
12417
12418
10538
5/8" Stubby Auger Wood Bit
3/4" Stubby Auger Wood Bit
7/8" Stubby Auger Wood Bit
1" Stubby Auger Wood Bit
Long Auger Wood Bits
INTERNATIONAL
CANADA
Bit Extensions
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
*Not a Nail Eater – should not be used in wood
with nails or other hard objects
84
• Extend bit lengths - Holesaw arbors, spade bits, Nail Eater II®
bits, Electrician's bits and Step bits.
• Use for boring deeper in wood.
• Patented cutting edge for fast easy drilling of clean holes, especially in salt
treated utility poles.
• Made from hardened alloy steel for added toughness
• The self-feeding threaded screw point draws the bit completely through
the wood – no need to push the bit while drilling
• Over center flute for evacuating chips
• Shaft is straightened for fewer vibrations to the hand and to help control
the quality of the hole
• Cutting edge can be re-sharpened multiple times and continues to self feed
• 7/16" Hex Shank with easy to fit quick change groove for Impact Drivers
Cat. No.
UPC No.
Description
70PT-11/16
71PT-11/16
70PT-13/16
71PT-13/16
70PT-15/16
71PT-15/16
11097
11100
11098
11101
11099
11102
11/16" x 24" Impact Auger Wood Bit
11/16" x 30" Impact Auger Wood Bit
13/16" x 24" Impact Auger Wood Bit
13/16" x 30" Impact Auger Wood Bit
15/16" x 24" Impact Auger Wood Bit
15/16" x 30" Impact Auger Wood Bit
Cat. No.
UPC No.
Description
3713GB
3678GB
3693GB
53892
50962
50753
50765
53892
51376
51376
52144
52144
Set Screw for 901-12/02706
Set Screw for 902-18/02707 and 902-24/02708
Set Screw for 904-5-1/2/34996
Set Screw for 904H-12/34980, 904H-18/35356
and 904H-24/35358
Allen Wrench for use with Set Screws for 901-12/02706,
902-18/02707 and 902-24/02708
Allen Wrench for use with Set Screws for 904-5-1/2/34996
Cat. No.
Length
UPC No. Inch mm
901-12
902-18
902-24
904-5-1/2
904H-12
904H-18
904H-24
02706 12 304.8 1/4 6.4 1/4 6.4 9/16 14.3
02707 18 457.2 5/16 7.9 23/64 9.1 21/32 16.7
02708 24 609.6 5/16 7.9 23/64 9.1 21/32 16.7
34996 5-1/2 139.7 7/16 11.1 1/2 12.7
1 25.4
34980 12 304.8 7/16 11.1 **
23/32 18.3
35356 18 457.2 7/16 11.1 **
23/32 18.3
35358 24 609.6 7/16 11.1 **
23/32 18.3
**For 7/16" Hex or 1/2" Round with 3 Flats, 1/4" Wide
Hex Shank
Inch mm
Hole Dia.
Head Dia.
Weight
Inch mm Inch mm lbs. g
1.4
2.5
3.4
2.1
2.9
4.3
5
636
1134
1543
953
1316
1951
2268
www.greenlee.com
E-Z Bore® Bits
• Double-end replaceable screw point. Choose the right feed for the
material you are drilling. Fine thread for hardwoods, coarse thread for fast,
effortless drilling even in soft, gummy woods.
• Tapered backside for easier removal.
• Open design won’t clog with wood chips.
• Three milled flats for use in portable electric or pneumatic drills and
stationary boring machines.
• Shank size = 7/16"
UPC No. Description
4236AV
05133
18358
149H-3/8
149H-1/4
904H-5-1/2
18358
12639
12640
12641
Cat. No.
Hole Dia. Overall Length
Pipe &
Weight
Inch mm Inch
mm Conduit Size lbs. g
12630
25.4
5
127.0
1/2"
149H–1-1/8
12631 1-1/8 28.6
1
5
127.0
1/2" & 3/4"
.3 137
149H–1-1/4
12632 1-1/4 31.8
5
127.0
3/4"
.3 137
149H–1-3/8
12633 1-3/8 34.9
5
127.0
—
.4 182
149H–1-1/2
12634 1-1/2 38.1
5
127.0
1"
.4 182
149H–1-3/4
12635 1-3/4 44.4
5
127.0
1-1/4"
.5 227
149H–2
12636
50.8
5
127.0
—
.6 273
149H–2-1/8
12637 2-1/8 54.0
5
127.0
1-1/2"
.7 318
149H–2-1/4
12638 2-1/4 57.2
5
127.0
—
.7 318
149H–2-9/16 12639 2-9/16 65.1
5
127.0
2"
.8 363
149H–3
12640
5
127.0
2-1/2"
1.1 499
149H–3-5/8
12641 3-5/8 92.1
6-1/4
158.8
3"
2.1 953
149H–4-5/8
12642 4-5/8 117.5 6-1/4
158.8
4"
2.6 1179
2
3
76.2
.4
18
• Complete assortment of the most commonly used E-Z Bore® bits.
• High-impact, rugged plastic carrying case.
• Full complement of accessories conveniently stored.
= Accessory
Contractor’s Bit Kit
Cat. No.
UPC No.
Description
6
2.72
Kit Cat./UPC No.
1441/34995
149H–1
12630
1" (25.4 mm) E-Z Bore Bit
✓
149H–1-1/8
12631
1-1/8" (28.6 mm) E-Z Bore Bit
✓
149H–1-1/4
12632
1-1/4" (31.8 mm) E-Z Bore Bit
✓
149H–1-1/2
12634
1-1/2" (38.1 mm) E-Z Bore Bit
✓
149H–1-3/4
12635
1-3/4" (44.4 mm) E-Z Bore Bit
✓
149H–2-1/8
12637
2-1/8" (54.0 mm) E-Z Bore Bit
✓
149H–2-9/16
12639
2-9/16" (65.0 mm) E-Z Bore Bit
✓
149H-1/4
12640
1/4" Screw Point
✓
51376
51376
1/8" Allen Wrench
✓
52144
52144
5/32" Allen Wrench
✓
904–5-1/2
34996
5-1/2" Bit Extension
✓
34997
34997
Plastic Case
✓
85
INTERNATIONAL
= Replacement Part
34995
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
149H
Weight
lbs. kg
CANADA
149H
Contractor’s Bit Kit
UPC No. Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
USA
149H–1
Tel: 800.435.0786
Fax: 800.451.2632
Conduit and Pipe Bit Sets
UPC
No.
Screw Point for 149G - 1, 149G - 1-1/8, 149G - 1-1/4, 149G 1-3/8, 149G - 1-1/2, 149G - 1-3/4, 149G - 2, 149G - 2-1/8, 149G
- 2-1/4, 149G - 2-9/16 and 149G - 3
Screw Point for 149G-3-5/8 and 4-5/8
Screw Point
Screw Point
Extension
Holemaking
Cat. No.
MADE FOR THE TRADE!™
Self-Feeding Spade Bits
Spade Bit Kit
Cat. No. UPC No.
34AR-6
03710
34AR6
Weight
lb. g
.83 376.48
Description
Self-Feeding Spade Bit Kit (6PC)
Holemaking
34A Spade Bits – Length 6-1/4" (158.8 mm)
Kit Cat./UPC No.
Hole Dia. HEX SHANK Weight
34AR-6/
Cat. No.
UPC No. Inch mm Inch mm lbs. g
03710
34A–3/8
03711 3/8
9.5
1/4 6.4 .09 40.8
1
34A–1/2
03712 1/2
12.7 1/4 6.4 .1
45.3
1
34A–5/8
03713 5/8
15.9 1/4 6.4 .1
45.3
1
34A–3/4
03714 3/4
19.1 1/4 6.4 .1
45.3
1
34A–7/8
03715 7/8
22.2 1/4 6.4 .12 54.4
1
34A–1
03716 1
25.4 1/4 6.4 .12 54.4
1
Bore hardwood, softwood, plywood and drywall.
• Innovative self-feeding design requires less effort and
reduces vibration.
• Unique tapered design allows existing hole enlargement.
• 1/4" Quick change hex shank.
• Forged and heat treated for long life.
• For use in 1/4" (6.4 mm) or larger power drills.
• Hole in top center of bit for wire pulling.
• See “Bit Extensions” (page 84) if more length required.
• P.O.P. Packaged.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
33A Spade Bits – Length 6-1/4" (158.8 mm)
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Spade Bits
86
Bore hardwood, softwood, plywood and drywall.
• Forged and heat treated for long life.
• For use in 1/4" (6.4 mm) or larger power drills.
• Hole in top center of bit for wire pulling.
• See “Bit Extensions” (page 84) if more length required.
• P.O.P. Packaged.
SPECIFICATIONS
Length
33A Spade Bit - 6-1/4" (158.8 mm)
33L Spade Bit - 16" (406.4 mm)
Spade Bit Kits
Cat. No. UPC No.
33AR-6
20364
Description
Spade Bit Kit (see chart)
Weight
lb. g
0.6 272
Kit Cat./UPC No.
Hole Dia. HEX SHANK Weight
33AR-6/
Cat. No.
UPC No. Inch mm Inch mm lbs. g
20364
33A–1/4
20344 1/4
6.4
1/4 6.4 .05
23.0
33A–3/8
20346 3/8
9.5
1/4 6.4 .09
40.8
1
33A–1/2
20348 1/2
12.7 1/4 6.4 .1
45.3
1
33A–5/8
20350 5/8
15.9 1/4 6.4 .1
45.3
1
33A–3/4
20352 3/4
19.1 1/4 6.4 .1
45.3
1
33A–7/8
20354 7/8
22.2 1/4 6.4 .12
54.4
1
33A–1
20357 1
25.4 1/4 6.4 .12
54.4
1
33A–1-1/8 20358 1-1/8 28.6 1/4 6.4 .15
68.0
33A–1-1/4 20359 1-1/4 31.8 1/4 6.4 .15
68.0
33A–1-3/8 20360 1-3/8 34.9 1/4 6.4 .16
72.6
33A–1-1/2 20361 1-1/2 38.1 1/4 6.4 .16
72.6
33L Spade Bits – Length 16" (406.4 mm)
Hole Dia.
HEX SHANK
Cat. No. UPC No. Inch mm Inch mm
1/4 6.4
33L–1/4 31535 1/4
6.4
33L–3/8
31536 3/8
9.5
1/4 6.4
33L–1/2 31537 1/2
12.7 1/4 6.4
33L–5/8 31539 5/8
15.9 1/4 6.4
33L–3/4 31540 3/4
19.1 1/4 6.4
33L–7/8 31541 7/8
22.2 1/4 6.4
33L–1
31542 1
25.4 1/4 6.4
33L–1-1/8 31543 1-1/8 28.6 1/4 6.4
33L–1-1/4 31544 1-1/4 31.8 1/4 6.4
33L–1-1/2 31545 1-1/2 38.1 1/4 6.4
Weight
lbs.
g
.22
99
.32
145
.33
150
.4
181
.4
181
.55
250
.33
150
.58
263
.56
254
.6
272
www.greenlee.com
D’VERSIBITS & ACCESSORIES
D’VersiBIT® System
A new twist to an old problem.
These flexible steel drill bits are the right tools for installing wire or cable inside
existing walls.
The D’VersiBIT® System makes it possible to
easily accomplish even complex installations. This patented system attaches a quality
drill bit to a long flexible spring steel shaft.
When used with the Placement Tool, this flexibility makes it possible to easily
m
anipulate the bit within walls. After
drilling, attach a D’VersiGRIP to the hole in the drill and pull wire or cable back
through the wall.
Type M, Masonry
Type HS, Wood
Cat. No.
UPC No.
Type HS
High Speed Steel
Cat. No.
UPC No.
304.8
3/16
4.8
—
—
1412D
39913
(6.4 mm)
18
457.2
3/16
4.8
—
—
1418D
38744
Blue
24
609.6
3/16
4.8
—
—
1424D
38745
36
914.4
3/16
4.8
—
—
1436D
38746
3/8"
12
304.8
3/16
4.8
—
—
3812D
39914
(9.5 mm)
24
609.6
3/16
4.8
—
—
3824D
38750
Black
36
914.4
3/16
4.8
—
—
3836D
38751
54
1371.6
3/16
4.8
06-03-54M
38668
3858D
38752
72
1828.8
3/16
4.8
—
—
3872D
38753
1/2"
36
914.4
3/16
4.8
—
—
1236D
38756
(12.7 mm)
54
1371.6
3/16
4.8
—
—
1258D
38757
Green
72
1828.8
3/16
4.8
—
—
1272D
38758
54
1371.6
1/4
6.4
08-04-54M
38678
= new product
= Replacement Part
= Accessory
87
INTERNATIONAL
12
Tel: +1.815.397.7070
Fax: +1.815.397.9247
1/4"
CANADA
Type M
Masonry
USA
Shaft
Dia.
Inch
mm
Tel: 800.435.0786
Fax: 800.524.2853
Shaft
Length
Inch
mm
Tel: 800.435.0786
Fax: 800.451.2632
• Designed for aggressive cutting in
• For drilling in masonry walls and
all types of wood.
through plaster.
• Recommended for use with Abrasion • Made from high-speed steel to
ensure long life.
Shield to reduce friction and abrasion
• Replaces Bellhanger bits on 12",
as the shaft turns against masonry.
18" and 24" lengths.
Bit Diameter
Inch (mm)
Color Code
Holemaking
It bends to meet your needs!
Fishing wire or cable through existing walls used to be frustrating and
time-consuming, but the D’VersiBIT has made it as simple as bowing the spring
steel shaft in the direction you want to drill and turning on the power. Proven in the
field to deliver accurate and professional results in many applications. Bits range
from 3/16" to 1" (4.8 to 25.4 mm) in diameter and in shaft length from 12" to 72"
(304.8 to 1828.8 mm).
MADE FOR THE TRADE!™
D'VersiBIT® System
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Holemaking
Type A, Auger
88
• Wood-type auger bit with
screw point.
• Pulls itself through wood,
avoids walking or skidding.
• Excellent for drilling in
soft woods or through thin
s ections.
• Slow back-taper allows for
easy retrieval.
Type A
Auger
Type B,
Combination with
Screw Point
Type C,
Combination
• For aggressive chip removal • For drilling in tough woods
and thick obstacles.
in many types of woods.
• Screw point for easy starting • Drilling speed relative to
pressure applied.
and pulling through wood.
• Chips can be brought
• With screw point removed,
easily out of the hole.
this bit can be ground to
function like a standard
combination bit.
Bit Dia.
Inch (mm)
Color Code
Shaft
Length
Inch
mm
Shaft
Dia.
Inch
mm
Type B
Combination with Screw Point
Cat. No.
UPC No.
Type C
Combination
Cat. No.
UPC No.
Cat. No.
UPC No.
1/4"
36
914.4
5/32
4.0
—
—
—
—
04-03-36C
38112
(6.4 mm)
54
1371.6
5/32
4.0
—
—
—
—
04-03-54C
38113
Blue
72
1828.8
5/32
4.0
—
—
—
—
04-03-72C
38114
3/8"
36
914.4
3/16
4.8
06-03-36A
38067
06-03-36B
38092
06-03-36C
38117
(9.5 mm)
54
1371.6
3/16
4.8
06-03-54A
38068
06-03-54B
38093
06-03-54C
38118
Black
72
1828.8
3/16
4.8
06-03-72A
38069
06-03-72B
38094
06-03-72C
38119
1/2"
36
914.4
3/16
4.8
08-03-36A
38072
08-03-36B
38097
08-03-36C
38122
(12.7 mm)
54
1371.6
3/16
4.8
08-03-54A
38073
08-03-54B
38098
08-03-54C
38123
Green
72
1828.8
3/16
4.8
08-03-72A
38074
08-03-72B
38099
08-03-72C
38124
9/16"
36
914.4
3/16
4.8
09-03-36A
38077
09-03-36B
38102
—
—
(14.3 mm)
54
1371.6
3/16
4.8
09-03-54A
38078
09-03-54B
38103
09-03-54C
38128
Orange
72
1828.8
3/16
4.8
09-03-72A
38079
09-03-72B
38104
09-03-72C
38129
3/4"
36
914.4
1/4
6.4
12-04-36A
38082
—
—
—
—
(19.1 mm)
54
1371.6
1/4
6.4
12-04-54A
38083
—
—
12-04-54C
38133
Red
72
1828.8
1/4
6.4
12-04-72A
38084
—
—
12-04-72C
38134
1"
36
914.4
1/4
6.4
16-04-36A
38087
—
—
—
—
(25.4 mm)
54
1371.6
1/4
6.4
16-04-54A
38088
—
—
—
—
White
72
1828.8
1/4
6.4
16-04-72A
38089
—
—
—
—
D'VersiBIT® Starter Kit
• All the tools to complete a typical wiring job.
• Includes 09-03-54B bit, 712P placement tool and 150 pulling grip.
Cat. No.
UPC No.
Description
DBITKIT
01630
D'VersiBIT® Kit with 9/16" Bit, Placement Tool and Grip for
Pulling 1/2" OD Wire
www.greenlee.com
Quick Connect Extensions
• Flexible shaft allows easy access to difficult and tight areas
• Convenient 1/4" quick connect receiver accepts most standard quick
change accessories.
• Multiple extensions can be easily joined to create the perfect length for
any job.
• Capacity: Any 1/4" quick change accessory 3/4" diameter and under.
UPC No.
Description
921-12
921-18
921-24
921-36
125Q
150Q
168Q
60A-3/4
921
12412
12413
12414
12415
12791
12792
12793
12417
12411
Extension, Quick Change 3/16x12
Extension, Quick Change 3/16x18
Extension, Quick Change 3/16x24
Extension, Quick Change 3/16x36
Grip, Quick Change 3/8x1/4
Grip, Quick Change 1/2x1/4
Grip, Quick Change 3/4x1/4
Bit, Auger, Quick Change 3/4A
Quick Change Extension System Kit
Holemaking
Cat. No.
SPECIFICATIONS
g
90.72
113.4
136.08
181.44
KIT CAT/UPC NO.
921/12411
g
18.144
22.68
27.216
KIT CAT/UPC NO.
921/12411
1
g
272.16
KIT CAT/UPC NO.
921/12411
1
1
1
89
INTERNATIONAL
= Accessory
LBS.
0.2
0.25
0.3
0.4
LBS.
0.04
0.05
0.06
LBS.
0.6
CANADA
= Replacement Part
WEIGHT
mm
4.8
4.8
4.8
4.8
WEIGHT
MM
–
–
–
WEIGHT
mm
6.4
USA
= new product
INCH
3/16
3/16
3/16
3/16
INCH
1/4
Tel: +1.815.397.7070
Fax: +1.815.397.9247
60A-3/4
SHAFT DIA.
mm
304.8
457.2
609.6
914.4
HEX SHANK
mm
19.1
Tel: 800.435.0786
Fax: 800.524.2853
SHAFT LENGTH
INCH
12
18
24
36
CAPACITY
100lbs
100lbs
100lbs
HOLE DIA.
INCH
3/4
Tel: 800.435.0786
Fax: 800.451.2632
Extension
921-12
921-18
921-24
921-36
Grip
125Q
150Q
168Q
Auger Bit
60A-3/4
MADE FOR THE TRADE!™
Extensions
• Sizes for 3/16" (4.8 mm) and 1/4" (6.4 mm) diameter shafts.
• Connect to chuck end of D’VersiBIT® shaft to increase the length of the bit.
SPECIFICATIONS
Holemaking
Size
3XT 36, 3XT 54, 3XT 72 - connecting end diameter 7/16" (11.1 mm)
4XT 36, 4XT 54, 4XT 72 - connecting end diameter 5/8" (15.9 mm)
Placement Tool
Cat. No.
3XT 36
3XT 54
3XT 72
4XT 36
4XT 54
4XT 72
Use With
UPC No.
38685
38686
38687
38688
38689
38690
Shaft Dia.
3/16" (4.8 mm)
3/16" (4.8 mm)
3/16" (4.8 mm)
1/4" (6.4 mm)
1/4" (6.4 mm)
1/4" (6.4 mm)
Cat. No.
UPC No.
Description
54333
50753
54333
50753
Screws for 3XT
Screws for 4XT
Length
36" (914.4 mm)
54" (1371.6 mm)
72" (1828.8 mm)
36" (914.4 mm)
54" (1371.6 mm)
72" (1828.8 mm)
• Allows placement of the drill bit at any point within the wall.
• Helpful in judging where the bit will be during drilling to avoid
accidentally drilling through the wall.
• Useful for vertical and horizontal placements.
Cat. No.
UPC No.
Description
712P
38350
D'VersiBIT® Placement Tool
SPECIFICATIONS
Function
Use to position all bit and shaft sizes.
• Grip can attach to standard D’Versibit® or to any standard 1/4” Quick
Connect adapter.
• Swivel design reduces twisting.
• Mesh design holds wire or cable during pull.
• Capacity: 100 lbs. pulling force.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Wire and Cable Pulling Grips
UPC No.
Description
125Q
12791
150Q
12792
168Q
12793
Quick Change Grip for Pulling Single Wire with 3/8" to 1/2"
(9.5 mm to 12.7 mm).
Quick Change Grip for Pulling 1/2" (12.7 mm) OD Wire with
1/2" to 9/16" (12.7 to 14.3 mm).
Quick Change Grip for Pulling 3/4" (19.1 mm) OD Wire with
3/4" to 1" (19.1 to 25.4 mm).
SPECIFICATIONS
Function
Pulling Strength
For pulling wire, cable or fish tape through walls.
100 lbs.
Abrasion Shield
• Tube fits both shaft sizes.
• Prevents insulation from wrapping around bit shaft.
• Protects shaft of masonry bits as they turn against masonry walls.
• Protects hand holding shaft during drilling.
SPECIFICATIONS
Function
Length
90
Cat. No.
Protects shaft and hand while drilling with any size
or type D'VersiBIT®.
48" (1219.2 mm)
Cat. No.
UPC No.
Description
606AS
38696
Abrasion Shield
www.greenlee.com
STEEL HOLE CUTTERS
Quick Change Stainless Steel Hole Cutters
INDIVIDUAL CarbidE-Tipped Hole Cutters
660
Cat. No.
Kit Cat. Kit Cat.
Min.
no. 660/ no. 655/
Size
Conduit
Chuck Size UPC No. UPC No.
UPC No. inch mm Size Pg ISO inch mm
05766
05820
645–5/8
05691
3/8
9.5
3/8
9.5
645–3/4
3/4 19.0
11
3/8
9.5
645–13/16 05694 13/16 20.6
13 20 3/8
9.5
05693
645–7/8
05695
645–1
05696
7/8 22.2 1/2"
1
3/8
21
3/8
9.5
3/8
9.5
3/8
9.5
32 3/8
9.5
655
05820
03581
54274
55225
03581
54274
55225
7/8", 1-1/8", 1-3/8", 1-3/4", 2" Cutter
Heads; Arbor, Hex Key and Case
7/8", 1-1/8", 1-3/8" Cutter Heads; Arbor, Hex
Key and Case
3 mm Hex Key
Set Screw
1/2" Ejector Spring
645–1-7/32 05698 1-7/32 31.0
645–1-1/4 05699 1-1/4 31.8
645–1-5/16 05958 1-5/16 33.3
645–1-3/8 05700 1-3/8 34.9
1"
3/8
9.5
645–1-7/16 05959 1-7/16 36.5
27
3/8
9.5
645–1-1/2 05701 1-1/2 38.1
= Replacement Part
= Accessory
✓
✓
9.5
3/8
645–1-3/4 05702 1-3/4 44.4 1-1/4"
3/8
9.5
✓
645–2
50 3/8
9.5
✓
05703
2
50.8 1-1/2"
645–2-1/8 05960 2-1/8 54.0
42
3/8
9.5
645–2-1/4 05704 2-1/4 57.2
48
3/8
9.5
645–2-3/8 05961 2-3/8 60.3
3/8
9.5
645–2-1/2 05705 2-1/2 63.5
2"
645–2-5/8 05706 2-5/8 66.7
3/8
9.5
645–3
3/8
9.5
05707
3
76.2
63 3/8
ARBORS AND PILOT DRILLS
Cat. no. UPC No.
Description
645–011
05752
Quick Change Arbor for sizes
5/8" through 2-1/4", 3/8" shank
645–022
05753
Quick Change Arbor for sizes
2-3/8" through 3", 1/2" shank
645–001
05761
Pilot Drill for sizes 5/8"
through 2-1/4"
645–002
05762
Pilot Drill for sizes 2-3/8"
through 3"
55225
55225
Ejector Spring
NOTE: To extend the life of your tool, see Cutting/Threading Oil on page 435.
= new product
✓
9.5
Kit Cat.
no. 660/
UPC No.
05766
Kit Cat.
no. 655/
UPC No.
05820
✓
✓
✓
✓
91
INTERNATIONAL
05766
✓
9.5
CANADA
660
9.5
✓
USA
Description
25 3/8
25.4
✓
Tel: +1.815.397.7070
Fax: +1.815.397.9247
UPC No.
9.5
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
3/8
Tel: 800.435.0786
Fax: 800.451.2632
kitS
645–1-1/16 05957 1-1/16 27.0
645–1-1/8 05697 1-1/8 28.6 3/4"
• Cuts stainless steel quickly and easily.
• Quick Change arbor allows you to
change cutter heads with a simple
push and a turn. Use the same
arbor for different size cutting
heads.
• Removable cutter heads
available in sizes from 5/8" through 3".
• Flange stop prevents over-drilling.
• Ejector spring on all sizes above 3/4"
makes removal of slug easier.
• Replaceable, cobalt-steel pilot drill with
split-point tip to prevent walking.
• Precision carbide teeth for optimum performance
and durability.
• Minimum chuck size of 3/8"
Holemaking
5/8 15.8
645–11/16 05692 11/16 17.5
MADE FOR THE TRADE!™
Carbide-Tipped Hole Cutters
• Multiple tungsten carbide tips for long life and smooth cutting.
• Cut fast, accurate, high quality holes in stainless steel, copper,
aluminum, steel.
• Flange stop prevents over-drilling.
• Replaceable cobalt steel pilot drill, with split-point tip design, to improve
performance and resist walking; eliminates need for “center punch.”
Holemaking
kit
Tel: +1.815.397.7070
Fax: +1.815.397.9247
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
635
03599
7/8", 1-1/8", 1-3/8" Cutterheads; Pilot Drill, Hex Key and
Case Weight 1.2 lbs. (.54 kg)
Cat. No.
Kit Cat.
Min.
no. 635/
Size
Conduit
Chuck Size Weight UPC No.
UPC No. inch mm Size Pg ISO inch mm lbs. g 03599
625–3/4
38324
3/4 19.0
11
1/4
6.4 .02
9
625–13/16 38325 13/16 20.6
13 20 1/4
6.4 .02
9
1/2"
16
6.4 .33 150
625–1-1/8 38328 1-1/8 28.6
3/4"
21
3/8
9.5 .43 195
625–1-7/32 38329 1-7/32 30.5
3/8
9.5 .44 200
625–1-1/4 38330 1-1/4 31.7
3/8
9.5 .33 150
Replacement Pilot Drills
625–1-3/8 38331 1-3/8 35.0
1"
3/8
9.5 .47 213
Cutter Size Range
Pilot Drill
Inch
mm
Cat. No. UPC No.
625–1-1/2 38332 1-1/2 38.1
3/8
9.5 .37 168
3/8
9.5 .40 182
8 ga. (4 mm)
Hex Set Screw
Wt.
Size Cat./UPC No. lbs. g
625–7/8
38326
625–1
38327
7/8 22.2
1
25.4
625–1-3/4 38333 1-3/4 44.4 1-1/4"
3/4-2 19.0-50.8 625–001 39872◊ 3 mm
54274
.19 86
625–2
2-1/2
54295
.28 127
625–2-1/2 38336 2-1/2 63.5
63.5
◊ Point of Purchase Package
USA
Description
Maximum Cutting Depth
Tel: 800.435.0786
Fax: 800.451.2632
UPC No.
CarbidE-Tipped Hole Cutters
SPECIFICATIONS
92
Cat. No.
625–002
38390
4 mm
38334
2
50.8 1-1/2"
2"
All hole cutters are packaged in Point of Purchase blister pack.
1/4
25 3/8
50 3/8
1/2
9.5 .02
✓
9
9.5 .50 227
12.7 .67 304
✓
✓
www.greenlee.com
Ultra Cutters
kit
Cat. No.
UPC No.
description
930
10214
Ultra Cutter Kit: Includes 7/8" to 2-1/2" Cutters, two Small Arbors for
extended assembly to 7/8" and 1-1/8" Cutters, Large Arbor, Hex Wrench
and Case. For conduit sizes 1/2" through 2".
Ultra cutters
Actual Hole Size
Cat. No. UPC No. In.
mm
925-7/8
Hole Diameter
Pg
ISO
7/8
22.5
1/2"
Pg-16
925-1-1/8 10158
1-1/8
28.6
3/4"
Pg-21
925-1-7/32 01643
1-7/32
30.5
925-1-5/16 04823
1-5/16
33.3
925-1-3/8 10159
1-3/8
35.0
1"
925-1-3/4 10160
1-3/4
44.4
1-1/4"
2
50.8
1-1/2"
ISO-50
2-1/2
63.5
ISO-63
925-2
10157
Conduit
10161
925-2-1/2 10162
Copper Pipe
5/8"
1-1/2"
2"
UPC No.
description
925-011
10163
Small Arbor with Pilot Drill for 7/8" to 1-7/32" Size Cutter
925-022
10185
Large Arbor with Pilot Drill for 1-3/8" to 2-1/2" Size Cutter
925-001
10186
Small Pilot Drill
925-002
10211
Large Pilot Drill
350
1-1/8" (28.6 mm)
270
1-3/8" (35.0 mm)
220
150
2-1/2 (63.5 mm)
120
Hole saw Type
average*
cutting time
(sec/hole)
average*
number
of holes
average*
cost/hole
($)
Bi-Metal
25
50
0.10
Ultra Cutter
10
500
0.10
Carbide-Tipped Cutter
10
500
0.20
*For 7/8" Hole in 14ga Mild Steel
NOTE: To extend the life of your tool, see Cutting/Threading Oil on page 435.
= new product
= Replacement Part
= Accessory
93
INTERNATIONAL
175
2" (50.8 mm)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
1-3/4" (44.4 mm)
CANADA
RPM
7/8" (22.5 mm)
Tel: 800.435.0786
Fax: 800.524.2853
RECOMMENDED cutting SPEEDS
USA
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
arbors and pilot drills
CUTTER SIZE
Holemaking
• Lasts 10 times longer than standard hole saws.
• Precision-ground teeth cut smooth, burr-free holes with ease.
• 1/4" (6.35 mm) capacity.
• Durability and speed provide low cost per hole.
• Split-point pilot drill prevents “walking” – makes accurate hole
placement easy.
• Spring-loaded slug ejector saves time.
• No tool required to change cutter sizes.
• Less chance of broken teeth because the saw body is machined
out of solid, high-speed steel.
MADE FOR THE TRADE!™
Quick Change Hole Saw Kit
Holemaking
02802
Quick Change Arbor Features:
• New arbor allows for rapid mounting or removal of hole saws.
• Faster, easier slug removal.
• Drill pilot hole without saw:
1. Eliminates the “bite” when saw crashes into the steel.
2. Provides better ergonomics - reduces stress on wrist, arm and hand.
3. Eliminates obstructed view from hole saw.
• Only one arbor required from 7/8" to 6" (7/16" shank recommended
for hole saws above 2-1/2").
• Works with recessed light and carbide grit hole saw products as well.
• Adapters re-usable to minimize costs.
• Universal - works with any brand hole saw.
Kit contains Bi-metal hole saws for 1/2" through 2" conduit sizes.
See page 95 for details.
Cat. No.
UPC No.
830Q
02806
02800
02801
02802
02800
02801
02802
02803
02804
02805
826S
02803
02804
02805
12787
Description
Quick Change Hole Saw Kit for 1/2" through 2" Conduit
Sizes, Includes Three Hole Saw Stops
5/16" Arbor, Minimum Chuck Size 3/8"
7/16" Arbor, Minimum Chuck Size 1/2"
Retrofit Kit - upgrade 3 Hole Saws up to 1-9/16" to Quick
Change
Small Adapters for 9/16" to 1-9/16" Saws Qty. 10
Large Adapters for 1-5/8" to 6" Saws Qty. 3
Bushings for 1-1/4" to 1-9/16" Saws Qty. 5
A Hole saw stops
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Shank
Arbor length
Arbor weight
Arbor operation
Arbor pilot drill
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
SPECIFICATIONS
94
Available for 3/8" and heavy duty 1/2" chuck sizes
5-1/2" with pilot drill
0.5 lbs (227 g)
Push collar to lock on saw; pull to release saw
37623, 4-1/8" x 1/4" (104.8 mm x 6.4 mm)
Deburring Tool
Cat. No.
UPC No.
Description
11170
11180
11170
11180
Deburring Tool
Cutter 3-pack
• Cleans burrs from both sides of the hole in seconds,
saving time and labor.
• Works with any hole size or shape 3/4" or larger.
• Use with existing drills, battery or electric-powered.
• Ensures safety, less chance of personnel or equipment
being cut on sharp edges.
• Patent pending.
SPECIFICATIONS
Material thickness
Material type
Shank
Cutter size
Operation
Deburrs up to 10 gauge
Mild and stainless steel, copper, brass, aluminum
Minimum chuck size 3/8"
13/16" diameter
Run tool clockwise to deburr, counterclockwise to clear chips
NOTE: To extend the life of your tool, see Cutting/Threading Oil onpage 435.
www.greenlee.com
HOLE SAWS
Bi-Metal Hole Saws
• Cut through steel, tin, aluminum, fiberglass, wood and plastic.
• Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through
2" x 4" wood studs.
• Extra-tough bi-metal blade – we use the highest grade of tool steel to
outlast competitor's blades. That beats premature saw replacement
and saves you money.
• Steam oxide finish – no paint to gum up and slow cutting. The saw runs
cooler for longer life and better performance.
• Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting.
• Made in USA
Pg-9
Pg-11
Pg-13
Pg-16
Pg-21
Pg-29
Pg-36
Pg-42
Pg-48
ISO
ISO-16
ISO-20
ISO-25
ISO-32
ISO-40
ISO-50
ISO-63
1/8"
1/4"
3/8"
1/2"
1/2"
5/8"
3/4"
3/4"
1"
1-1/4"
1-1/2"
2"
2"
2"
2-1/2"
3-1/2"
3-1/2"
4"
5"
Use with
quick change
arbor no.
02800*
02801*
use with
std.
Arbor No.
37157,
37155,
or 38522
37156 or
37154
37156
37156
Weight
lbs.
.1
.1
.1
.1
.1
.1
.1
.1
.1
.1
.2
.2
.2
.1
.2
.2
.2
.2
.3
.2
.2
.3
.2
.3
.3
.3
.5
.3
.3
.4
.4
.4
.4
.5
.5
.6
.6
.6
.6
.7
.7
.7
.8
.8
.8
.9
1.1
1.2
1.2
1.4
.4
.5
g
46
46
46
46
46
46
46
46
46
46
91
91
91
46
91
91
91
91
137
91
91
137
91
137
137
137
227
137
137
182
182
182
182
227
227
273
273
273
273
318
318
318
363
363
363
409
499
545
545
636
182
227
*See page 94 for Quick Change adapter information.
95
INTERNATIONAL
= Accessory
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
Copper Pipe Size
CANADA
= Replacement Part
14.3
15.9
17.5
19.0
20.6
22.2
23.8
25.4
27.0
28.6
30.2
31.7
33.3
35.0
36.5
38.1
39.7
41.3
42.9
44.4
46.0
47.6
50.8
52.4
54.0
57.2
58.7
60.3
63.5
65.0
66.7
69.8
73.0
76.2
79.4
82.5
85.7
88.9
92.1
95.2
98.4
101.6
104.8
108.0
111.1
114.3
120.6
127.0
139.7
152.4
68.0
70.0
USA
= new product
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
2
2-1/16
2-1/8
2-1/4
2-5/16
2-3/8
2-1/2
2-9/16
2-5/8
2-3/4
2-7/8
3
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
3-7/8
4
4-1/8
4-1/4
4-3/8
4-1/2
4-3/4
5
5-1/2
6
2-5/8
2-7/8
Hole Dia.
Conduit Pg
Tel: +1.815.397.7070
Fax: +1.815.397.9247
19131
19132
19133
19134
19135
19136
19137
19138
19140
19141
19143
19144
19145
19146
19147
19148
19149
19150
19151
19152
19153
19154
19155
19157
19158
19159
19160
19161
19162
19163
19164
19165
19166
19167
19168
19169
19170
19171
19172
19174
19175
19176
19177
19178
19179
19180
19181
19182
19183
19184
36169
36170
Actual Hole Size
Inch
mm
Tel: 800.435.0786
Fax: 800.524.2853
825–9/16
825–5/8
825–11/16
825–3/4
825–13/16
825–7/8
825–15/16
825–1
825–1-1/16
825–1-1/8
825–1-3/16
825–1-1/4
825–1-5/16
825–1-3/8
825–1-7/16
825–1-1/2
825–1-9/16
825–1-5/8
825–1-11/16
825–1-3/4
825–1-13/16
825–1-7/8
825–2
825–2-1/16
825–2-1/8
825–2-1/4
825–2-5/16
825–2-3/8
825–2-1/2
825–2-9/16
825-2-5/8
825–2-3/4
825–2-7/8
825–3
825–3-1/8
825–3-1/4
825–3-3/8
825–3-1/2
825–3-5/8
825–3-3/4
825–3-7/8
825–4
825–4-1/8
825–4-1/4
825–4-3/8
825–4-1/2
825–4-3/4
825–5
825–5-1/2
825–6
825–68
825–74
Tel: 800.435.0786
Fax: 800.451.2632
UPC No.
Holemaking
Cat. No.
MADE FOR THE TRADE!™
Bi-Metal Hole Saws with Stops
Holemaking
• Helps control hole saw drilling depth to max of 1/8
• Easily removeable stop for transfer between hole saws.
• Helps protect hardware, wire and drill during cutting
• Can use one to four stops (depending on diameter of hole saw) based on
personal preference.
• Offered in kits at no additional cost.
Cat. No.
UPC No.
Description
826S
830
830Q
12787
19192
02806
Hole saw stop (Qty. 3)
Hole saw set with 3 stops for 1/2” - 2” conduit
Quick Change Hole Saw Kit with 3 Stops
Carbide-Grit Hole Saws
• Long-lasting tungsten carbide-grit delivers extremely clean,
smooth cuts through tile, cement board, and other abrasive materials.
Perfect for cutting holes in Quazite® enclosure or hardy board siding
for 3-0 box installation.
• Rugged construction for enduring performance.
• Use with Arbors listed on page 94.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Carbide Grit Hole Saws
cat. no.
upc no.
725–7/8
10072
96
pilot drill
Cat. No.
UPC No.
Description
725-001
10082
1/4" Carbide Tipped Pilot Drill
Actual hole size
inch
mm
7/8
22.2
725–1-1/8
725–1-3/8
725–1-1/2
725–1-3/4
725–2
10073
10075
10076
10077
10078
1-1/8
1-3/8
1-1/2
1-3/4
2
28.6
35.0
38.1
44.4
50.8
725–2-1/8
10079
2-1/8
54.0
725–2-1/2
10080
2-1/2
725–3-5/8
10081
3-5/8
725–4-1/8
10687
725–4-1/2
01879
hole diameter
conduit
pg
iso
1/2"
16
3/4"
1"
21
1-1/4"
1-1/2"
50
63.5
2"
63
92.1
3"
4-1/8
104.8
3-1/2"
4-1/2
114.3
4"
www.greenlee.com
Arbors with Replacement High-Speed Steel Pilot Drill Bits
• The best arbor in the industry ensures a solid connection without any gaps or wobbling.
• Arbors include replaceable, high-speed steel pilot drill.
• Pilot drills have unique split-point tip design.
• Use with Greenlee bimetal hole saws, recessed light hole saws and carbide-grit hole saws (carbide-tipped pilot drill sold separately).
• Can be used with Greenlee #901 or #904 bit extensions.
Holemaking
Arbors
Cat./UPC No.
37157
38507
37157B/37630
38522
37155
N/A
37154
37156
38524
38522B/38529
38505
37155B/37628
02801
N/A
38504
37154B/37903
38506
37156B/37626
Round with 3 flats
1/4" (6.4 mm)
1/4" (6.4 mm)
9/16" - 1-3/16"
(14.3 - 30.2 mm)
Hole Saws
.2 lbs (91 g)
Hex
5/16" (7.9 mm)
3/8" (9.5 mm)
9/16" - 1-3/16"
(14.3 - 30.2 mm)
Hole Saws
.2 lbs (91 g)
Hex
7/16" (11.1 mm)
1/2" (12.7 mm)
9/16" - 1-3/16"
(14.3 - 30.2 mm)
Hole Saws
.2 lbs (91 g)
Hex
7/16" (11.1 mm)
1/2" (12.7 mm)
9/16"-6"
(14.3 - 152.4mm)
0.5 lbs. (227 g)
Hex
5/16" (7.9 mm)
3/8" (9.5 mm)
1-1/4" - 2"
(31.8 - 50.8 mm)
Hole Saws
.5 lbs (227 g)
Hex
7/16" (11.1 mm)
1/2" (12.7 mm)
1-1/4" - 6"
(31.8 - 152.4 mm)
Hole Saws
and all Greenlee
Recessed Light
Hole Saws
.5 lbs. (227 g)
Tel: 800.435.0786
Fax: 800.451.2632
Cat./UPC No.
Standard Pack
Cat./UPC No.
37623
38526
Standard Pack
10082
39893
Bulk Pack
Qty: 50 per pack
37624
38991
Diameter
1/4"
(6.4 mm)
4-1/8"
(104.8 mm)
3-1/4"
(82.5 mm)
1/4"
(6.4 mm)
1/4"
(6.4 mm)
Use With
Greenlee
Arbor #’s
37157, 37155,
37156 &
37154
Length
Diameter
Use With
Greenlee
Arbor #’s
Weight
37154, 37155, 37154, 37155,
37156 &
37156 &
37157
38522
.2 lbs (91 g)
= Replacement Part
.2 lbs (91 g)
.2 lbs (91 g)
* Quazite is a registered trademark of Strongwell Corporation.
See page 91 for Quick Change adapter information.
= new product
Weight
4-1/8"
(104.8 mm)
= Accessory
97
INTERNATIONAL
39873
Length
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Point of
Purchase Pack
CANADA
CARBIDE-TIPPED
Pilot
Drills
Tel: 800.435.0786
Fax: 800.524.2853
High-Speed
STEEL Pilot
Drills
USA
Standard Pack
N/A
Point of
Purchase Pack
02800
Bulk Pack
N/A
Shank
Hex
Shank Size
5/16" (7.9 mm)
Min. Chuck Size 3/8" (9.5 mm)
Use With
9/16" - 2"
(14.3 - 50.8 mm)
Weight
0.5 lbs (227 g)
MADE FOR THE TRADE!™
Bi-Metal Hole Saw Kits
• Several electrician’s kits available providing an assortment of the
most commonly used Greenlee variable pitch hole saw sizes and arbors.
• High-impact, rugged plastic carrying case.
• Each kit includes three hole saw stops.
Cat. No.
830
834
835
830Pg
889
890
891
Holemaking
835 / 27538
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
830 / 19192
Cat. No.
UPC No. Description
825–3/4
825–7/8
825–1
825–1-1/8
825–1-3/8
825–1-1/2
825–1-3/4
825–2
825–2-1/4
825–2-1/2
825–3
825–3-1/4
825–3-5/8
825–3-3/4
825–4-1/8
825–4-1/2
825–4-3/4
825–5/8
825–3/4
825–13/16
825–1-3/16
825–1-1/2
825–1-7/8
825–2-3/8
38522
37157
37155
37156
38526
19134
19136
19138
19141
19146
19148
19152
19155
19159
19162
19167
19169
19172
19174
19177
19180
19181
19132
19134
19135
19143
19148
19154
19161
38522
37157
37155
37156
38526
3/4" Hole Saw
7/8" Hole Saw
1" Hole Saw
1-1/8" Hole Saw
1-3/8" Hole Saw
1-1/2" Hole Saw
1-3/4" Hole Saw
2" Hole Saw
2-1/4" Hole Saw
2-1/2" Hole Saw
3" Hole Saw
3-1/4" Hole Saw
3-5/8" Hole Saw
3-3/4" Hole Saw
4-1/8" Hole Saw
4-1/2" Hole Saw
4-3/4" Hole Saw
Pg-9 (15.9 mm) Hole Saw
Pg-11 (19.0 mm) Hole Saw
Pg-13 (20.6 mm) Hole Saw
30.2 mm Hole Saw
Pg-29 (38.1 mm) Hole Saw
Pg-36 (47.6 mm) Hole Saw
Pg-48 (60.3 mm) Hole Saw
Arbor w/Pilot Drill
Arbor w/Pilot Drill
Arbor w/Pilot Drill
Arbor w/Pilot Drill
Pilot Drill
Kit Cat./UPC No.
830/ 834/ 835/ 830Pg/ 889/ 890/ 891/
19192 19913 27538 29209 03478 03479 03480
✓
✓
✓
✓
✓
✓
(2)
✓
✓
890 / 03479
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
889 / 03478
98
✓
✓
Tel: 800.435.0786
Fax: 800.451.2632
CANADA
Weight
Description
lbs. kg
Hole Saw Kit for 1/2" through 2" Conduit Sizes
2.7 1.2
Hole Saw Kit for 2-1/2" through 4" Conduit Sizes 6.2 2.8
Hole Saw Kit for 1/2" through 4" Conduit Sizes
7.7 3.5
Hole Saw Kit for Pg-9 through Pg-48
2.7 1.2
Plumber’s Hole Saw Kit – 3/4" through 2-1/4"
Conduit Sizes
2.3 1.0
Industrial Maintenance Hole Saw Kit – 3/4"
through 4-3/4" Conduit Sizes
9.7 4.4
Electrician’s/Plumber’s Hole Saw Kit - 3/4"
through 2-1/2" Conduit Sizes
3.5 1.6
834 / 19913
USA
UPC No.
19192
19913
27538
29209
03478
03479
03480
891 / 03480
www.greenlee.com
RECESSED LIGHT HOLE SAWS
Recessed Light Hole Saws
• Industry’s only interchangeable replacement blades.
• Strong durable back plate.
• Available in two styles – steel tooth and carbide grit.
• Made and designed in USA by Greenlee.
• Use with a power drill to cut large diameter holes for recessed
lighting fixtures.
• Saws use Greenlee arbor 37156, purchased separately.
Capacity
Cat. No.
UPC No.
Description
35720
35721
35722
35723
35724
35725
35726
35727
35708
35730
35731
35720
35721
35722
35723
35724
35725
35726
35727
35708
35730
35731
Blade for 35712
Blade for 35713
Blade for 35714
Blade for 35715
Blade for 35716
Blade for 35717
Blade for 35718
Blade for 35719
Set of 5 Blade Screws
Blade for 35728
Blade for 35729
Cat./
UPC No.
35712
35716
35713
35717
35714
35718
35715
35719
35728
35729
Steel Toothed Blade - up to 7/8" (22.2 mm) plywood, wood,
acoustical tile and ceiling tile.
Carbide Grit Blade - up to 7/8" (22.2 mm) drywall, plywood,
wood, acoustical tile, ceiling tile, plaster and stucco.
Description
Steel Toothed
Carbide Grit
Steel Toothed
Carbide Grit
Steel Toothed
Carbide Grit
Steel Toothed
Carbide Grit
Steel Toothed
Carbide Grit
Diameter
4-3/8" (111 mm)
4-3/8" (111 mm)
6-3/8" (162 mm)
6-3/8" (162 mm)
6-5/8" (168 mm)
6-5/8" (168 mm)
6-7/8" (175 mm)
6-7/8" (175 mm)
5-3/8 (137 mm)
5-3/8 (137 mm)
Hole Weight
lbs. kg Use For
.76 .34 Mini Juno, Capri,
.74 .34 Marco and Halo
1.2 .54 Halo and Capri
1.1 .50 Halo and Capri
1.3 .59 Juno and Progress
1.3 .59 Juno and Progress
1.3 .59 Lithonia, Marco,
1.4 .64 Lightolier, Progress,
Capri and Precolite
.98 .44 Capri, Juno,
Lightolier, Progress,
and Precolite
.98 .44 Capri, Juno,
Lightolier, Progress,
and Precolite
06923
Quick Cutter Recessed Hole Saw, Adjustable in 1/2"
Increments for Cuts of 2-1/2" to 7"
99
INTERNATIONAL
06923
CANADA
= Accessory
Description
USA
= Replacement Part
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Quickest, most affordable way to cut perfect holes in ceiling tile.
• Cuts clean, precise holes that ensure no light leakage or poor-fitting
installations.
• Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes
in very abrasive materials and still stay sharp.
• Stabilizer spring balances cutting forces and offers more control of the
tool when drilling drywall.
• Dedicated arbor and pilot drill eliminates changeover time.
• Fits a 3/8" drill chuck and can be used with a cordless drill.
• Included dust shield helps eliminate flying dust and debris.
Tel: 800.435.0786
Fax: 800.451.2632
Quick Cutter™ Hole Saws
Holemaking
SPECIFICATIONS
MADE FOR THE TRADE!™
Recommended Hole Saw Cutting Speeds
Hole Saw Size
Inch
mm
9/16
14.3
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Holemaking
100
5/8
RPM
Mild Steel Cast Iron
580
400
Brass Aluminum
790
900
Hole Saw Size
Inch
mm
2-5/16
58.7
RPM
Mild Steel Cast Iron
150
100
Brass Aluminum
195
225
15.9
550
365
730
825
2-3/8
60.3
140
95
190
200
11/16
17.5
500
330
665
750
2-1/2
63.5
135
90
180
205
19.0
460
300
600
690
2-9/16
65.0
130
85
175
200
13/16
20.6
425
280
560
635
2-5/8
66.7
130
85
170
195
3/4
22.2
390
260
520
585
2.677
68.0
125
80
160
185
15/16
7/8
23.8
370
245
495
555
2-3/4
69.8
125
80
160
185
25.4
350
235
470
525
2-7/8
73.0
120
80
160
180
1-1/16
27.0
325
215
435
480
2.913
74.0
115
75
150
170
1-1/8
28.6
300
200
400
450
76.2
115
75
150
170
1-3/16
30.2
285
190
380
425
3-1/8
79.4
110
70
140
165
1-1/4
31.7
275
180
360
410
3-1/4
82.5
105
70
140
155
1-5/16
33.3
260
175
345
390
3-3/8
85.7
100
65
130
150
1-3/8
35.0
250
165
330
375
3-1/2
88.9
95
65
130
145
1-7/16
36.5
240
160
315
360
3-5/8
92.1
95
60
120
140
1-1/2
38.1
230
150
300
345
3-3/4
95.2
90
60
120
135
1-9/16
39.7
220
145
290
330
3-7/8
98.4
90
60
120
135
1-5/8
41.3
210
140
280
315
101.6
85
55
110
130
1-11/16
42.9
205
135
270
305
4-1/8
104.8
80
55
110
120
1-3/4
44.4
195
130
260
295
4-1/4
108.0
80
55
110
120
1-13/16
46.0
190
125
250
285
4-3/8
111.1
80
50
100
120
1-7/8
47.6
180
120
240
270
4-1/2
114.3
75
50
100
105
50.8
170
115
230
255
4-3/4
120.6
75
50
95
95
2-1/16
52.4
165
110
220
245
127.0
65
45
90
90
2-1/8
54.0
160
105
210
240
5-1/2
139.7
60
35
85
85
2-1/4
57.2
150
100
200
225
152.4
55
35
75
75
1
2
3
4
5
6
www.greenlee.com
SAW BLADES
Reciprocating Blades
• Progressive-pitch reciprocating saw blades cut a wide range of standard construction materials quickly and cleanly – regardless of thickness.
• Bi-metal construction provides maximum flexibility and break resistance – plus lasting sharpness.
• Exclusive plunge tip makes starting cuts faster and easier.
• Blades color coded by application.
Reciprocating Saw Blades
EMT conduit
strut
Cat. No. UPC No.
Metal
Type
Application
QTY.
per pk.
09963
09961
09962
09964
09965
09966
09977
09975
09976
6 x 3/4 x .035 152 x 19.05 x .889 Progressive
4 x 5/16 x .035 101 x 7.938 x .889
18
4 x 3/4 x .035 101 x 19.05 x .889
18
6 x 3/4 x .035 152 x 19.05 x .889
14
18
6 x 3/4 x .035 152 x 19.05 x .889
24
6 x 3/4 x .035 152 x 19.05 x .889
8 x 3/4 x .050 203 x 19.05 x 1.27 10/14
8 x 3/4 x .050 203 x 19.05 x 1.27
14
8 x 3/4 x .050 203 x 19.05 x 1.27
18
Bimetal,
Straight
Bimetal,
Scroll
Bimetal,
Straight
Bimetal,
Straight
Bimetal,
Straight
Bimetal,
Straight
Bimetal,
Straight
Bimetal,
Straight
Bimetal,
Straight
Metal
5
Metal
5
Metal
5
Metal
5
Metal
5
Metal
5
Metal
2
Metal
2
Metal
2
353-234
353-656
353-646
353-956
353-156
09991
09967
09968
09969
09970
8 x 3/4 x .050 203 x 19.05 x 1.27 Progressive
6 x 3/4 x .050 152 x 19.05 x 1.27
6
6 x 3.4 x .050 152 x 19.05 x 1.27
6
9 x 3/4 x .050 228 x 19.05 x 1.27
6
12 x 3/4 x .050 304 x 19.05 x 1.2
6
HCS,
Taper
Bimetal,
Taper
Bimetal,
Straight
Bimetal,
Straight
Bimetal,
Straight
Wood Only
5
Wood with Nails
5
Wood with Nails
5
Wood with Nails
5
Wood with Nails
5
353-969 09990
9 x 7/8 x .062 228 x 22.23 x 1.56
353-345 09972
8 x 3/4 x .050 203 x 19.05 x 1.27 Progressive
Specialty
= new product
= Replacement Part
= Accessory
6
Bimetal,
Taper
Wood Demolition
2
8/10
Bimetal,
Taper
Metal Demolition
2
Bimetal,
Taper
General
5
101
INTERNATIONAL
353-966 09979 9 x 7/8 x .062 228 x 22.23 x 1.56
Tel: +1.815.397.7070
Fax: +1.815.397.9247
CANADA
353-123
353-318
353-418
353-614
353-618
353-624
353-804
353-814
353-818
Tel: 800.435.0786
Fax: 800.524.2853
Demolition
Length x Width x Thickness Teeth
Inches
mm
per inch
USA
Wood
rod/rebar
Tel: 800.435.0786
Fax: 800.451.2632
thick wall pipe
Holemaking
16-gauge metal stud
MADE FOR THE TRADE!™
Holemaking
Jig Saw Blades
• Progressive-tooth design delivers faster cutting through a broad range of material types and thicknesses.
• Shatterproof bi-metal construction with high speed cobalt matrix cutting edge.
• For rough and finish cutting in full range of applications including wood (even with nails), metal, plaster, drywall and fiberglass.
• Tungsten Carbide Grit Edge blade style.
- No teeth to snag, cuts efficiently on both up and down strokes for extra smooth finishes.
- Additional cutting application for cast iron, tile, pipe, ceramic.
• Center front tooth makes plunge cuts quick and easy.
Jig Saw Blades
Cat. No.
UPC No.
373-U123
09994
373-U234
09993
373-U345
09995
373-U300
09996
373-T123
10004
373-T234
10003
373-T345
10005
373-TVAR
10006
Description
3-5/8" Univeral Jig Saw Blade
4-1/4" Universal Jig Saw Blade
5" Universal Jig Saw Blade
2-3/4" Universal Jig Saw Blade
4" T-Shank Jig Saw Blade
4-1/2" T-Shank Jig Saw Blade
5-1/4" T-Shank Jig Saw Blade
T-Shank Jig Saw Blade –
Variety Pack
Teeth
Progressive
Progressive
Progressive
Grit
Progressive
Progressive
Progressive
Progressive
Type
High-speed Steel
High-carbon Steel
Bimetal
Carbide Grit
High-speed Steel
High-carbon Steel
Bimetal
373-T123
373-T234
373-T345
Application TEETH PER INCH
Metal
18
Wood
6
General
18
18
Abrasive Materials
18
Metal
Wood
6
General
18
Metal, Wood
6
and General
Qty. per pk.
5
3
5
2
3
5
5
1 ea.
FLEXIBLE CONDUIT CUTTERS
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Cut flexible metal conduit in seconds with a few turns of the crank and an
easy twist of the conduit.
• Ample clearance between handle and body for comfortable operation.
• Set conduit size for multiple cuts of the same size conduit. No need to reset.
• Compact and lightweight. Fits easily in back pocket or tool pouch.
• Set blade adjustment with only a screwdriver.
• Convenient in-handle blade storage – holds up to five spare blades.
• Point-of-purchase packaged. Blades point-of-purchase packaged 1 and 5
blades per package.
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Flex Splitter® MC and Flexible Conduit Cutter
102
SPECIFICATIONS
Capacity
Weight
14/2 to 10/4 BX 3/8" flexible metal conduit
1940 - 4 lbs. (1.8 kg)
Cat. No.
UPC No.
Description
1940
1941-1
1941-5
34949
35145
35889
36301
34953
00288
33735
34949
35145
35889
36301
Flex Splitter® Flexible Metal Conduit Cutter
Single Blade for 1940
5 Pack Blades for 1940
Handle
Screw on Handle
Pawl and Spring Kit
Knob and Screw Unit
www.greenlee.com
HAND SAWS
12" Hack Saw
Tubular back provides
handy blade storage
inside.
Heavy-duty die-cast
aluminum handle is
virtually break-proof.
Convenient adjustment
lever makes blade
tensioning a snap.
Bimetal blade design
for long cutting life
and flexibility.
Cat. No.
UPC No.
Description
Replacement Hack Saw Blades
333A
23635
12" (305 mm) Heavy-Duty Hack Saw
Cat. No.
SPECIFICATIONS
Capacity
Weight
UPC No. Description
Holemaking
Large, 4-1/2" throat
enables deeper cuts,
makes handling easy.
Qty. per pk.
333-1218 10037
12" (305 mm) Bi-metal Blade, 18 Teeth Per Inch
5
333-1224 10038
12" (305 mm) Bi-metal Blade, 24 Teeth Per Inch
5
333-1232 10039
12" (305 mm) Bi-metal Blade, 32 Teeth Per Inch
5
12" (304.8 mm) Blade
1.4 lbs. (0.7 kg)
Keyhole Saw
Cat. No.
UPC No.
Description
301A
23641
Keyhole Saw with 6" Blade (152 mm)
= Replacement Part
= Accessory
blade length
13" (330 mm)
18" (457 mm)
13" (330 mm)
18" (457 mm)
Description
PVC Saw
PVC Saw
Blade for 00113
Blade for 00114
103
INTERNATIONAL
= new product
UPC No.
00113
00114
00115
00116
Tel: +1.815.397.7070
Fax: +1.815.397.9247
322-013
Cat. No.
322-013
322-018
322-113
322-118
CANADA
322-018
• “V” tooth design enables straight cuts on both push and pull saw strokes.
• Resharpenable blade.
• Pointed blade nose makes drywall surface penetration easy.
• Ergonomic handle is interchangeable with most popular PVC saw brands.
Tel: 800.435.0786
Fax: 800.524.2853
PVC Saws
USA
301A
Tel: 800.435.0786
Fax: 800.451.2632
• Ergonomic-style handle with non-slip grip creates a sure
and comfortable feel.
• Hardened steel blade makes cutting drywall, cement board, plastic
and wood quick and easy.
• Blade goes through the handle for maximum support of the cutting blade.
MADE FOR THE TRADE!™
BAND SAWS
Heavy-Duty Band Saw
Holemaking
• Cuts up to 8" pipe and 9-1/2" x 11" (241 x 280 mm) tray or duct.
• Convertible to wet cutting systems with optional accessories.
• Three sawing speeds 76, 141, and 268 feet per minute
(23, 43, and 82 meters per minute).
• Converts to vertical in seconds.
• Automatic shut-off after cut is complete.
• Sturdy wheels for mobility and stability.
• Heavy-duty, adjustable hydraulic feed.
• Heavy-duty, steel bed with welded steel legs.
SPECIFICATIONS
Capacity
Cat. No.
UPC No.
Description
1399
31961
1399-22
32364
32322
32237
32322
32237
9-1/2" x 11: Capacity Mobile Band Saw
(241.3 x 279.4 mm)
9-1/2" x 11" Capacity Mobile Band Saw
(241.3 x 279.4 mm) 220 VAC
Wet Cutting System for 120VAC 1399
Vertical Work Table
Dimensions
Power Source
Weight
Blade Size
Rectangular 9-1/2" x 11" (241.3 x 279.4 mm)
Round 9-1/2" Dia. or 8" Pipe (241.3 mm)
45° Angle 5-1/2" (139.7 x 139.7 mm)
Vertical Work Table 7-5/8" x 10" (193.7 x 254.0 mm)
Throat Height 9-1/2" (241.3 mm)
Throat Depth 6-1/4" (158.8 mm)
52" H. x 47" L. x 27" W. (13208 H. x 11938 L. x 685.8 W. mm)
1399-120 VAC 1/2 Horsepower. 1399-22 - 220 VAC
346 lbs. (157 kg)
1/2" x .025" x 93" (12.7 mm x 0.64 mm x 2362 mm)
Perfect for your mobile or portable band saw, these top-quality, bi-metal
blades feature high-speed steel teeth that can handle even tough metals
like stainless steel with ease. Virtually unbreakable, too.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Band Saw Blades
104
• Bi-metal blades feature high-speed tool steel, bonded to an
extra-tough alloy back for maximum hardness and heat resistance.
• Fits most popular models of portable band saws.
Mobile Band Saw Blades
Cat. No.
UPC NO.
Description
Type
Application
Teeth per inch
399-14A
399-18A
399-24A
389-1014
389-1418
389-24
32336
32337
32338
10044
10045
10043
1/2" x .025" x 93" Mobile Band Saw Blade1
1/2" x .025" x 93" Mobile Band Saw Blade1
1/2" x .025" x 93" Mobile Band Saw Blade1
1/2" x .020" x 44-7/8" Portable Band Saw Blade2
1/2" x .020" x 44-7/8" Portable Band Saw Blade2
1/2" x .020" x 44-7/8" Portable Band Saw Blade2
Bi-metal
Bi-metal
Bi-metal
Bi-metal
Bi-metal
Bi-metal
Metal
Metal
Metal
Metal
Metal
Metal
10.14
18
24
10/14
14/18
24
1
2
Use with 1399 (31961)
Use with 530 (30276)
www.greenlee.com
ANCHORS AND FASTENERS
Anchor and Fastener Selection Guide
Use In
Use With
Made Of
Size Range
General Information
Caulking
Concrete, brick,
stone, block
Machine
screw
or bolts
Zinc alloy
and lead
1/4"- 20 to
3/8"-16
Single unit caulking anchor, can be set shallow (flush) or deep
in hole. Setting tool required (1 provided free in each box of
anchors). For setting in hollow block or to set anchors all at
the same depth, use Greenlee Screw anchor expander.
Drop
Concrete, brick,
stone
Machine
screw
or bolts
Steel
1/4"-20 to
3/8"-16
Heavy-duty use in solid masonry where codes require all steel
bolt anchors. Pre-assembled, internal expander plug. Can be
installed flush with masonry surface or sub-set. Setting tool
required (1 provided free in each box of anchors).
Concrete, block,
brick
No other
fastener
needed
Steel
1/4" x 1" to
1/4" x 2-1/2"
A safe, secure fastener that actually taps concrete and
eliminates the need for concrete inserts with their alignment
problems. Use with Greenlee masonry drill set tool.
Block, wallboard, No other
fastener
plaster, tile
needed
Steel
L3/16" x 3" to
3/8" x 4"
Available in round head and mushroom head. Fully-threaded
machine screw with spring wing toggle head.
Concrete, block,
brick
No other
fastener
needed
Zinc and
Steel
1/4" x 1" to
1/4" x 1-1/2"
Fast, medium-duty. No hole spotting, removable. Use in
hollow or solid base applications.
Concrete,
block, tile,
brick
Sheet metal, Corrosion-
wood, lag
resistant
screws
plastic
#6-8 x 1" to
#10-12 x 1"
Light-duty, multi-size anchor. Has collar for hollow
materials.
Masonry Screw
Holemaking
Anchor/Fastener Type
Toggle Bolts
Zinc Mushroom
Head
Plastic Conical
Screw Anchor Expanders for Caulking Anchors
Use with
Anchor No.
Qty.
Per Box
Weight
lb. kg
866
02667
#10 – 24
84299
1
.3
.1
868
02669
1/4" – 20
84299
1
.4
.2
870
02671
3/8" – 16
84305
1
.6
.3
Cat. No.
UPC No.
Description
4451AV
4457AV
4717AV
1125GB
05191
05197
05300
50423
Anchor Screw for 866
Anchor Screw for 868
Anchor Screw for 870
Roll Pin 1/4" x 1-1/8"
= Replacement Part
= Accessory
105
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
Expansive
Belt Size
USA
2. Strike head of expander
with hammer or mallet until
anchor is held securely in
wall. Unscrew expander.
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
1. Drill hole of required size
and put anchor screw on
expander. Insert screw
anchor into drilled hole.
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Quickly and securely set expansive screw anchors in masonry,
regardless of thickness.
• Hardened alloy steel.
• Patented.
MADE FOR THE TRADE!™
Caulking Anchors
• Zinc alloy and lead caulking anchor can be set flush or subset.
Greenlee setting tool required.
• Rustproof, use interior or exterior.
• For setting in hollow block. To set anchors all same depth,
use Greenlee screw anchor expander.
Lead Caulking Anchors and Setting Tools
Cat./
Thread
Req. Hole
Set
Qty.
Weight
UPC No. Size
Dia. Min. Depth Tool* Per Box lbs. kg
Holemaking
84299 1/4"–20 1/2"
1. Drill hole in
masonry.
2. Insert anchor,
conical end first,
until flush
with surface.
3. Using setting tool,
caulk lead outer
sleeve with sharp
blows. Position
fixture.
4. Insert screw
or bolt and
tighten.
7/8"
84305 3/8"–16 3/4"
Working Load Pullout
lbs.
kg
84329
100
3.8 1.7
125
56.6
1-1/4" 84335
50
7.1 3.2
312.5
141.6
*One Setting Tool included with each box of anchors.
Approvals: Conforms to the description in Federal Specification FFS-325, Group I, Type 1, Class 1.
NOTE: Working load is one fourth the ultimate/maximum capacity. For critical or unusual applications, site testing is recommended.
Drop Anchors
• Heavy-duty steel anchor for use where codes require all steel bolt anchors.
• Pre-assembled, internal expander plug for faster installation.
• Four-way slot design assures firm hold.
Drop Anchors and Setting Tools
cat./
Anchor &
Bolt
Min. Thread Setting Qty. Weight
UPC No. Hole Dia. Thread Size Depth Depth Tool* Per Box lb. kg
To set anchor flush with surfaces
84253
3/8"
1/4"–20
1-1/8"
1/2"
84273
100
3 1.4
84256
1/2"
3/8"–16
1-5/8"
5/8"
84276
50
7 3.2
*One Setting Tool included with each box of anchors.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Cat./UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
SPECIFICATIONS
106
1. Drill hole the same
diameter as anchor
being used.
2. Drive anchor flush
with concrete.
3. Expand anchor with setting tool
provided. Anchor is properly
expanded when shoulder of
setting tool is flush with top
of anchor.
To set anchor below surfaces
1. Drill hole deeper than anchor length. Thread bolt into anchor. Hammer anchor into hole
until bolt head is at desired height. Remove bolt and set anchor with setting tool.
NOTE: The use of a 24 to 40 ounce hammer is recommended for expanding the anchor.
Working Load Shear
kg
lbs.
Working Load Pullout
lbs.
kg
84253
1037
469.8
842.5
381.7
84256
1712.5
775.8
1518.7
688.9
Approvals: Conforms to the description in Federal Specification FFS-325, Group VIII,
Type 1, for concrete expansion shield anchors.
NOTE: Working load is one fourth the ultimate/maximum capacity.
For critical or unusual applications, site testing is recommended.
Zinc Mushroom Head Drive Anchors
• Fast, medium-duty anchor for use in concrete, block and brick.
• No hole spotting.
• Use in hollow or solid material.
• Made of zinc and steel.
1. Drill required diameter
hole in material, to a
minimum depth equal
the overall anchor
minus the thickness
of the object to be
fastened. Clean hole.
2. Insert anchor body
through object to be
fastened, and into the
hole in base material.
3. Tap the nail until it is
flush with the zinc
anchor head.
Cat./
UPC No.
84110
Size
1/4" x 1"
Required
Hole Size
1/4"
Qty
Per Box
100
Weight
lbs.
kg
2
.9
84111
1/4" x 1-1/4"
1/4"
100
2.4
1.1
84112
1/4" x 1-1/2"
1/4"
100
2.6
1.2
NOTE: For critical or unusual applications, site testing is recommended.
www.greenlee.com
Plastic Conical Anchors
• Light-duty, multi-size anchor for use in concrete, block, tile and brick.
• Use with sheet metal, wood and lag screws.
• Has collar for hollow materials.
• Moisture and chemical resistant, for indoor/outdoor use.
• Anchor kits include 100 anchors, 100 screws and one masonry bit.
Anchors Only
B
Cat./
UPC No.
Use with
Screw Sizes
Required
Hole Size
Qty.
Per Box
Weight
lbs.
kg
84003
#6 - #8
3/16"
100
.2
.1
84006
#10, #12
1/4"
100
.2
.1
1. Drill hole full length of
anchor or 1/8” deeper.
2. Tap anchor into hole
flush with surface.
3. Insert screw through
fixture into plastic plug
and tighten.
Anchor Kits
Cat./
Anchor
UPC No.
Size
Size
84009
#6, #8
#8 x 1"
84012
#10, #12
#10 x 1"
84015
#10, #12
#12 x 1"
84019
#10, #12
#10 x 1"
Screw
Type
Bit
Size
Weight
lbs.
kg
C
3/16"
.8
C
1/4"
1
.5
C
1/4"
1.4
.6
B
1/4"
1.1
.5
.4
Holemaking
C
Masonry Screw Anchors
Installation Tools
Cat./
UPC No. Description
Qty.
Per
Wt.
Box lbs. kg
3-1/2" Masonry Screw Drill Bit – for use
with 1" to 1-1/2" long screws
.4
.2
1
NOTE: For use in lightweight, hollow core concrete block, minimum embedment 1-3/8", pullout 715 lbs. Due to
the variance in make-up of cement block, values will vary. It is suggested that the anchor be tested in specific
material being used before installing fixtures.
Wt.
lbs.
kg
84469
1/4" x 1"
3/4"
1180
100
1.2
.5
84472
1/4" x 1-1/4"
3/4"
1180
100
1.4
.6
84475
1/4" x 1-1/2"
1-1/4"
1800
100
1.6
.7
84478
1/4" x 2"
1-1/4"
1800
100
1.8
.8
84481
1/4" x 2-1/2"
1-1/4"
1800
100
2.1
1.0
Masonry Screw Drill Set Kit
Cat./
UPC No. Description
84463
Masonry Screw Drill Set Kit Includes:
84469
50 – 1/4" x 1" Masonry Screws
Material Concrete
3000 PSI
Qty.
Min.
Pullout Per
Wt.
Embedment lbs. Box lbs. kg
3/4"
84472
50 – 1/4" x 1-1/4" Masonry Screws
84466
1– Masonry Screw Drill Set Tool with 84484 Bit
1180
1
1.6
.7
Small Jobs – Use special Greenlee masonry screw drill bit for holes. Screw can be installed with 5/16" wrench, nut driver or socket
with ratchet.
Large Jobs – Use the special Greenlee Masonry Screw Drill Set Tool in kit with 3/8" or larger electric drill for drilling holes and screw
installation.
= new product
= Replacement Part
= Accessory
107
INTERNATIONAL
Masonry Screw Drill Set Tool with 84484 Bit 1
84484
Material Concrete 3000 PSI
Qty.
Min. Embedment Pullout lbs. Per Box
Tel: +1.815.397.7070
Fax: +1.815.397.9247
84466
Size
CANADA
2. Retract bit, insert masonry screw
into socket head of tool and drive
screw into hole.
Cat./
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
1. Use set Tool with bit in drilling
position to drill hole in surface.
Masonry Screw Anchors – Each box of 100 includes 1 bit
USA
Masonry Screw Anchors must be used with Greenlee masonry screw drill bits, numbers
84484 and 84487, which are a special size to insure secure thread engagement. Standard
masonry bit size holes will not provide proper contact with screw threads and may cause
masonry anchor screws to pull out.
Tel: 800.435.0786
Fax: 800.451.2632
• A safe, secure, steel fastener that taps concrete and eliminates the need
for concrete inserts with their alignment problems.
• Use with Greenlee masonry drill set tool.
• Use in concrete, block and brick.
• Quick and easy two-step installation, saves time.
• Made in USA.
MADE FOR THE TRADE!™
Toggle Bolts and Spring Wings
• For light to medium fastening in block, wallboard, plaster and hollow tile.
• Fully threaded machine screw with spring wing toggle head.
• Generous size of toggle head acts to spread the load over a maximum area.
Round Head
Toggle Bolts and Spring Wings
Holemaking
Cat./
UPC No.
Mushroom Head
1. Drill hole completely through wall.
2. Insert bolt through items to be fastened.
Fold wings completely back, then push
through hole until wings spring open.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
3. Pull back to hold wings against inside wall while tightening with screw driver.
108
Toggle Bolt
Size
Head
Required
Qty.
Hole Size Per Box
Weight
lbs.
kg
84405
84409
1/4" x 4"
3/8" x 4"
Round
Round
11/16"
1"
50
25
3.7
4.3
1.7
1.9
84424
84425
3/16" x 3"
3/16" x 4"
Mushroom
Mushroom
1/2"
1/2"
50
50
1.9
2.2
.9
1.0
84428
84429
1/4" x 3"
1/4" x 4"
Mushroom
Mushroom
11/16"
11/16"
50
50
3.3
3.8
1.5
1.7
www.greenlee.com
MASONRY BITS
Masonry Bits
• Steel bit with carbide tip.
• Use in concrete, block, brick, stone, wallboard and plaster.
• Available in two styles: percussion for use in electric hammer
and fast spiral for use in conventional power drills.
• Available in sizes ranging from 3/16" - 1/2" (4.8 - 12.7 mm)
Fast Spiral
Percussion Bits
SPECIFICATIONS
Twist Length
Overall Length
2-1/2" (63 mm)
4" (101 mm)
Hole Dia.
Inch
mm
3/16
4.8
Shank
Inch
mm
3/16
4.8
Weight
lbs.
g
.03
14
84582
1/4
6.4
1/4
6.4
.05
23
84588
5/16
7.9
1/4
6.4
.06
27
84594
3/8
9.5
1/4
6.4
.08
36
84600
1/2
12.7
1/4
6.4
.12
54
Holemaking
Percussion
Cat./
UPC No.
84576
Fast Spiral Bits
Cat./
UPC No.
84526
Hole Dia.
Inch
mm
3/16
4.8
Shank
Inch
mm
3/16
4.8
Weight
lbs.
g
.03
14
84532
1/4
6.4
1/4
6.4
.05
23
84538
5/16
7.9
1/4
6.4
.06
27
84544
3/8
9.5
1/4
6.4
.08
36
84550
1/2
12.7
1/4
6.4
.12
54
TAPCON® Masonry Fasteners and Drill Bits
109
INTERNATIONAL
= Accessory
Qty.
Per Box
100
100
100
100
100
100
100
100
100
CANADA
= Replacement Part
Maximum
Attachment
Thickness
1/4"
3/4"
1-1/4"
1-3/4"
2-1/4"
2-3/4"
1/4"
3/4"
1-1/4"
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
Embedment
Min.
Max.
1"
1-3/4"
1"
1-3/4"
1"
1-3/4"
1"
1-3/4"
1"
1-3/4"
1"
1-3/4"
1"
1-3/4"
1"
1-3/4"
1"
1-3/4"
Tel: 800.435.0786
Fax: 800.524.2853
Tapcon® Masonry Fasteners – Each box of 100 includes 1 bit
Fastener
Cat. No.
UPC No.
Size
Type
LE 405
07405
1/4" x 1-1/4"
A
LE 415
07415
1/4" x 1-3/4"
A
LE 425
07425
1/4" x 2-1/4"
A
LE 435
07435
1/4" x 2-3/4"
A
LE 445
07445
1/4" x 3-1/4"
A
LE 455
07455
1/4" x 3-3/4"
A
LE 300
07300
3/16" x 1-1/4"
A
LE 310
07310
3/16" x 1-3/4"
A
LE 320
07320
3/16" x 2-1/4"
A
USA
A
Slotted Hex
Washer Head
Tel: 800.435.0786
Fax: 800.451.2632
• Corrosion-resistant − All Tapcon® fasteners are protected against
rust and corrosion by the exclusive Stalgard® finish.
• Fast − install two or three Tapcon® fasteners per minute. Simple two-step
operation − drill, then drive − eliminates the need to set anchors.
• Strong − Tapcon® fasteners and the masonry material are mechanically
linked for exceptionally strong pullout strength.
• Removable − Tapcon® fasteners can be removed and reinserted
in the same hole. Great for repairs or adjustments.
• Available in two diameters − 1/4" and 3/16".
• Made in USA.
MADE FOR THE TRADE!™
Multi-Purpose Installation Tool
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Holemaking
• Multi-purpose tool designed to be used with all sizes and styles
of Tapcon® masonry fasteners.
• Tapcon® anchors are easy to install... a simple, two-step operation
− drill the hole, then drive the fastener with the Condrive tool.
110
Cat. No.
UPC No.
Description
LP 100
07100
Condrive 1000 kit consists of: Drill Adapter, Drill Sleeve
Assembly, 5/16" Hex Driver-Magnetic, 1/4" Hex Socket for
3/16" Anchor, Phillips Bit, #2 Phillips Bit, #3 Phillips Bit,
1/8" Hex Key, Set Screw 1/4-28, Drive Sleeve Assembly for
5" & 6" Anchors
Bending
From rugged hand benders to the full-featured Smart
Quad Bender™ which calculates complete layout
measurements, Greenlee benders are the industry
standard for bending EMT, IMC, PVC and rigid
conduit. Refer to our easy-to-use selection
guide for choosing a Greenlee bender or
accessory that will get the job done
right the first time.
Contents
Mechanical Benders
Electrical Benders
Hydraulic Benders
Accessories
PVC Heaters
PVC Accessories
113
116
118
125
128
130
MADE FOR THE TRADE!™
MADE FOR THE TRADE!™
Bending Selection Guide
Cat. No. – Description
Page No. 1/2" 3/4"
1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4"
*Correct
shoe group required
1818 Mechanical Bender (EMT)
1818 Mechanical Bender (IMC)
1818 Mechanical Bender (Rigid)
855 Smart Quad Bender™
854 Quad Bender™
555® Electric Bender Rigid & EMT*
555® Electric Bender IMC*
882 & 882CB Hydraulic Bender
881CT Hydraulic Bender
115
115
115
116
116
117, 118
117, 118
118
120
✓
✓
✓
✓
✓
✓
✓
Cat. No. – Description
Page No. 1/2" 3/4"
Combination
Bending
Rigid,
EMT &
IMC
Conduit
Rigid
Conduit
Bending
Bending
(Steel
&
Aluminum)
See notes below for Stainless Steel
conduit bending.
Rigid
Cat. No. – Description
Hand Benders‑–‑Site-Rite® Aluminum
Hand Benders‑–‑Site-Rite II® Iron
1818 & 1818T Mechanical Bender
855 Smart Quad Bender™
854 Quad Bender™
555E/555EC Electric Bender
882 & 882CB Hydraulic Bender
881CT Hydraulic Bender
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
EMT
Conduit
Bending
112
*
*
*
*
Hand Benders‑–‑Site-Rite® Aluminum
Hand Benders‑–‑Site-Rite® Iron
Hand Benders‑–‑Hickeys
1800 Mechanical Bender
1801 Mechanical Bender
1818 & 1818R Mechanical Bender
855 Smart Quad Bender™
854 Quad Bender™
555R/555RC Electric Bender
882CB Hydraulic Bender
881CT Hydraulic Bender
880 Hydraulic Bender
777 Hydraulic Bender
884 Hydraulic Bender
885 Hydraulic Bender
†
†
†
†
Cat. No. – Description
Hand Benders‑–‑Site-Rite® Aluminum
Hand Benders‑–‑Site-Rite II® Iron
1800 Mechanical Bender
1801 Mechanical Bender
1818 & 1818R Mechanical Bender
855 Smart Quad Bender™
854 Quad Bender™
555I/555IC Electric Bender
882CB Hydraulic Bender
881CT Hydraulic Bender
Cat. No. – Description
IMC
Conduit
Bending
PVC
Coated
Rigid
Conduit
Bending
✓ = One Shot Capability.
S = Segment Bend Only.
See pages 128 and 129 for
PVC Blankets and Heaters
for bending PVC.
855 Smart Quad Bender™
with 01700 PVC Shoe Group
854 Quad Bender™
with 01700 PVC Shoe Group
555®/555C Electric Bender
with 37279 Shoe Group
884PVC Hydraulic Bender
113
113
113
114
114
115
116
116
117
118
120
122
123
124
124
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
113
113
115
116
116
117
118
120
113
113
114
114
115
116
116
117
118
120
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
5"
✓
5"
✓
✓
✓
S
✓
✓
S
✓
✓
S
✓
✓
S
✓
✓
S
1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4"
5"
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4"
841A 842A 843A
841F 842F 843F
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
Page No. 1/2" 3/4"
✓
✓
840A 841A 842A 843A
840F 841F 842F 843F
✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓ ✓ ✓ ✓
✓
Page No. 1/2" 3/4"
✓
1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4"
841A 842A 843A
841F 842F 843F
508 512 516
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
Optional
✓
Page No. 1/2" 3/4"
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
5"
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4"
116
✓
✓
✓
✓
✓
✓
116
✓
✓
✓
✓
✓
✓
117
✓ ✓ ✓ ✓
124 Optional Shoes Required ✓
✓
✓
✓
✓ Optional ✓ Optional ✓
1818, 1818R, 855, 854, 555 & 555C can also bend Stainless Steel Rigid conduit in the same size conduit ranges as steel Rigid conduit using the Rigid shoe group.
*∆ 881CT
can also bend 2-1/2” & 3” Stainless Steel Rigid Conduit using the respective 2-1/2” & 3” shoe groups.
† For Stainless Steel EMT conduit bending 855 & 854 can bend 1/2’, 3/4”, 1-1/2” & 2”; 555 & 555C can bend /2’, 3/4” & 1-1/2”; and 1818 & 1818T can bend 3/4” & 1” with respective EMT
shoe groups.
5"
www.greenlee.com
MECHANICAL BENDERS
SITE-RITE® Hand Benders for ½”-1¼” EMT and ½”-1” Rigid/IMC conduit
SITE-RITE® Aluminum Heads
840A, 841A, 842A, 843A
SITE-RITE® Iron Heads
840F, 841F, 842F, 843F
Superior, patented Site-Rite® sighting system featuring cast-in,
readable markings on the bender heads and a finish that provides
for the best visibility in low-light.
Choice of aluminum or iron alloy construction provides options
depending on the user’s preference for feel and weight.
Strong, stable square hook design.
1-1/2” bender heads both offer the power pedal feature with a larger
foot area on the head for greater control, stability and leverage.
1/2”, 3/4” & 1” bender heads all have enlarged foot pedals and
increased toe room to ensure greater control, stability and leverage.
All the bender handles are a consistent diameter, offering a bigger grip
area, while still straight up and down for fast 30 degree bends.
Lifetime Limited Warranty.
840A
841A
842A
843A
840AH
841AH
842AH
840F
841F
842F
843F
840FH
841FH
842FH
84H1
84H2
84H3
12810
12838
12839
12524
12676
12677
12678
12831
12832
12833
12834
12835
12836
12837
12689
12690
12691
Weight
Aluminum Hand Bender Head for 1/2” EMT
Aluminum Hand Bender Head for 3/4” EMT, 1/2” Rigid/IMC
Aluminum Hand Bender Head for 1” EMT, 3/4” Rigid/IMC
Aluminum Hand Bender Head for 1-1/4” EMT, 1” Rigid/IMC
Aluminum Hand Bender Head with Handle for 1/2” EMT*
Aluminum Hand Bender Head with Handle for 3/4” EMT, 1/2” Rigid/IMC*
Aluminum Hand Bender Head with Handle for 1” EMT, 3/4” Rigid/IMC*
Iron Hand Bender Head for 1/2” EMT 1
Iron Hand Bender Head for 3/4” EMT, 1/2” Rigid/IMC
Iron Hand Bender Head for 1” EMT, 3/4” Rigid/IMC
Iron Hand Bender Head for 1-1/4” EMT, 1” Rigid/IMC
Iron Hand Bender Head with Handle for 1/2” EMT*
Iron Hand Bender Head with Handle for 3/4” EMT, 1/2” Rigid/IMC*
Iron Hand Bender Head with Handle for 1” EMT, 3/4” Rigid/IMC*
Handle for 1/2” & 3/4” Aluminum or Iron Hand Bender Heads
Handle for 1” Aluminum or Iron Hand Bender Heads
Handle for 1-1/4” Aluminum or Iron Hand Bender Heads
1.4 lbs.(0.7 kg)
2.1 lbs. (0.9 kg)
3.5 lbs. (1.6 kg)
8.3 lbs. (3.8 kg)
5.5 lbs. (2.5 kg)
6.4 lbs. (2.9 kg)
11 lbs. (5 kg)
3.1 lbs. (1.4 kg)
4.3 lbs. (2.0 kg)
7.2 lbs. (3.3 kg)
16.2 lbs. (7.3 kg)
7 lbs. (3.2 kg)
9 lbs. (4.1 kg)
15 lbs. (6.8 kg)
4.5 lbs. (2.0 kg)
7.3 lbs. (3.3 kg)
11.5 lbs. (5.2 kg)
Centerline Bending Radii
LINE OF
SIGHT
FOOT PRESSURE
90
60 45 30 22-1/2
1/2"
4-3/16" (106.5 mm) 840A, 840AH
840F, 840FH
3/4"
1/2"
5-1/8" (130.2 mm)
841A, 841AH
841F, 841FH
1"
3/4"
6-1/2" (165.1 mm)
842A, 842AH
842F, 842FH
9-5/8" (244.5 mm)
843A
843F
1-1/4" 1"
10
Aluminum
Iron
HICKEYS with Welded Handles for ½” - 1” Rigid conduit
= Replacement Part
= Accessory
UPC No.
Description
WEIGHT
18102
18103
18104
Hickey for 1/2" Rigid
Hickey for 3/4" Rigid
Hickey for 1" Rigid
6.9 lbs. (3.1 kg).
8 lbs. (3.6 kg).
13 lbs. (5.9 kg)
113
INTERNATIONAL
= new product
Cat. No.
508
512
516
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Heavy-duty cast steel head.
• Welded steel handle.
• Bend tight radius stub-ups.
Tel: 800.435.0786
Fax: 800.524.2853
FLOOR LINE
RIGID Centerline
IMC Radii
CANADA
45
EMT
USA
UPC No. Description
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
Bending
•
•
•
•
•
•
•
MADE FOR THE TRADE!™
Little Kicker® Offset Bender
• Bends offsets in one easy operation. Insert conduit, depress handle,
release and remove conduit.
• Makes identical offsets every time for wall mounted boxes
with exposed conduit.
• Creates offset that matches the knockout in box.
• Maximum offset of .56" (9/16).
Cat. No.
UPC No.
Description
1810
1811
13815
14159
Offset Bender for 1/2" EMT
Offset Bender for 3/4" EMT
Bending
SPECIFICATIONS
Capacity
1810 − 1/2" EMT
1811 − 3/4" EMT
1810 − 8.75 lbs. (4 kg)
1811 − 8.50 lbs. (3.9 kg)
Weight
Mechanical Benders for IMC and Rigid Conduit
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Ratchet action for increased leverage.
• Bypass the ratchet for fast, direct bending on smaller sizes.
• Heavy-duty welded construction for long, reliable service.
• Built-in bending degree indicator and easy to use bending charts for
accurate, consistent bends.
• Does not include handle.
114
Cat. No.
UPC No.
Description
1800
1800G1
24400
24401
1801
08429
19988
24753
08429
19988
Mechanical Bender for 1/2", 3/4", 1" IMC and Rigid conduit
Mechanical Bender without undercarriage, for bench or truck bed
mounting. Bends 1/2", 3/4", 1" IMC and Rigid conduit
Mechanical Bender for 1-1/4", 1-1/2" IMC and Rigid conduit
Undercarriage Unit for 1800 and 1801
Wheel, Non-flat
Use a 5' (1.5 m) length of 1" Rigid conduit for the handle.
SPECIFICATIONS
Capacity
Weight
1800, 1800G1 − 1/2", 3/4" and 1" IMC and Rigid.
1801, − 1-1/4" and 1-1/2" IMC and Rigid
1800 − 81 lbs. (36.7 kg)
1800G1 − 48 lbs. (21.8 kg)
1801 − 104 lbs. (47.2 kg)
Centerline Bending Radii
1800, 1800G1
1801
1/2" Rigid conduit
3/4" Rigid conduit
1" Rigid conduit
1-1/4" Rigid conduit
1-1/2" Rigid conduit
2-5/8"
4-5/8"
5-7/8"
8-1/16"
9-11/16"
(66.7 mm)
(117.5 mm)
(149.2 mm)
(204.8 mm)
(246.1 mm)
www.greenlee.com
Mechanical Benders for EMT, IMC, Rigid and Aluminum Conduit
•
•
•
•
•
•
•
Capacity
EMT: 3/4" - 2"
RIGID: 1/2" - 1-1/2"
IMC: 1/2" - 1-1/4"
ALUMINUM RIGID: 1/2" - 1-1/2"
1818 − 250 lbs. (114 kg)
1818T − 217 lbs. (99 kg)
1818R − 185 lbs. (84 kg)
Weight
Key CAT NO.
UPC No.
Cat. No.
UPC No.
Description
1818
22192
1818R
20231
1818T
20232
08429
1818G1
19988
08429
22220
19988
Mechanical Bender for 3/4" through 2" EMT conduit,
1/2" through 1-1/4" IMC conduit and 1/2" through
1-1/2" Rigid steel, aluminum and stainless steel
conduit
Mechanical Bender for 1/2" through 1-1/4" IMC
conduit and 1/2" through 1-1/2" Rigid steel,
aluminum and stainless steel conduit
Mechanical Bender for 3/4" through 2" EMT conduit
and 3/4" & 1" stainless steel EMT
Under Carriage Assembly
Frame and undercarriage unit only
Wheel, Non-flat
Stainless Steel RIGID:
1/2" - 1-1/2"
Stainless Steel EMT:
3/4" - 1"
Description
1818
BENDERS
1818R 1818T
1818G1
SHOE GROUPS*
36905 36906 36907
22220
Frame and Undercarriage Unit
1
1
1
1
36697
36697
Roller Pin Unit
1
1
1
1
1
1
C
18681
18681
Cushioned Roller Unit
1
1
1
1
1
1
D
18827
18827
1/2, 3/4 & 1" Rigid/IMC Shoe Unit
1
1
1
1
E
18828
18828
1-1/4" Rigid/IMC; 1-1/2" Rigid Shoe Unit
1
1
1
1
G
18830
18830
3/4 & 1" EMT Shoe Unit
1
1
1
1
H
18831
18831
1-1/4 & 1-1/2" EMT Shoe Unit
1
1
1
1
I
18642
18642
1-1/4 & 1-1/2" EMT Follow Bar
1
1
1
1
18832
2" EMT Shoe Unit
1
1
1
1
18636
2" EMT Follow Bar
1
1
1
1
L
36296
36296
Roller Follow Bar Guide
1
1
1
1
N
18772
18772
Retainer Clip
1
1
1
1
1
1
O
F
19988
18829
1723
19988
18829
23818
2
2
2
Wheel, Non-flat
2" Rigid Aluminum Shoe Unit
Steel Storage Box For Shoe Units
Reference chart for ordering bending accessories.
K
I
O
H
E
D
C
J
F
= new product
= Replacement Part
= Accessory
G
B
L
Shoe Size
Inches
mm
1/2" Rigid/IMC
2-21/32"
67.5
3/4" Rigid/IMC
4-5/8"
117.5
3/4" EMT
5-3/32"
129.4
1" Rigid/IMC
5-7/8"
149.2
1" EMT
6-13/32"
162.7
1-1/4" Rigid/IMC
7-3/8"
187.3
1-1/4" EMT
8-9/32"
210.3
1-1/2" Rigid
9"
228.6
1-1/2" EMT
8-9/32"
210.3
2" EMT
9-3/16"
233.4
2" Aluminum
10-15/32"
265.9
Tel: +1.815.397.7070
Fax: +1.815.397.9247
A
Centerline Bending Radii
115
INTERNATIONAL
N
OPTIONAL
CANADA
18832
18636
Tel: 800.435.0786
Fax: 800.524.2853
J
K
USA
1818G1
B
Tel: 800.435.0786
Fax: 800.451.2632
A
* SHOE GROUPS
Bending
SPECIFICATIONS
Bends a wide variety of types and sizes of conduit.
Durable ratchet mechanism for easy bending.
Bypass the ratchet for fast, direct bending on smaller sizes.
Bending degree indicator and charts for fast, easy, accurate bending.
All shoe and bending accessories can be mounted to the frame unit
and secured with a chain and lock.
Heavy-duty undercarriage with wheels.
Does not include handle.
MADE FOR THE TRADE!™
ELECTRICAL BENDERS
Smart Quad Bender™ Electric Conduit Bender for 1/2" to 2" EMT, IMC, Rigid and
Rigid Aluminum
95R7
Bending
01711 - Deluxe Pendant
SPECIFICATIONS
Capacity
Power Source
Weight
1/2"- 2" EMT, IMC, Rigid and Rigid Aluminum conduit
120 VAC; 20 Amp
510 lbs. (231.3 kg)
• Bends a variety of types and sizes of conduit.
• Intelligent pendant controls: Standard (included), digital readout and
programmable bend angles for accurate repeat bends. Deluxe (optional),
interactive control – calculates complete layout measurements for various
types of bends.
• Bends 1/2" to 2" EMT, IMC, Rigid and Rigid aluminum conduit without
any shoe changes. No loose parts to get lost.
• Two operating positions; table top and upright.
• Optional shoes available to bend PVC-coated steel conduit.
• Excellent portability. Convenient lifting eyes and fork tubes.
• Weather-resistant construction.
• Squeeze adjustment to compensate for variations in EMT conduit.
Cat. No.
UPC No.
Description
855
08550
38650
01711
38863
01648
38780
38148
01700
38962
38650
01711
38863
01648
38780
38148
01700
38962
Smart Bender for 1/2" - 2" EMT, IMC and Rigid conduit (Includes
Standard Pendant)
Deluxe Pendant for older bender with serial code ZW
Deluxe Pendant for current bender with serial code ABL & ADY
Standard Pendant for older bender with serial code ZW
Standard Pendant for current bender with serial code ABL & ADY
Shoe Unit, 1/2" - 1-1/4"
Shoe Unit, 1-1/2" - 2"
40 MIL PVC Coated Rigid Shoe Group, 1/2"-2" (Exc. ZW)
Vinyl Rain Cover
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Bends 1/2" to 2" EMT, IMC, Rigid and Rigid Aluminum conduit without
any shoe changes. No loose parts to get lost.
• Two operating positions; tabletop and upright.
• Remote pendant switch and bending data charts for easy, accurate bends.
• Simple setup and easy operation.
• Squeeze adjustment to compensate for variations in EMT conduit.
• Excellent portability. Convenient lifting eyes and fork tubes.
• Optional shoes available to bend PVC coated steel conduit.
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Quad Bender™ Electric Conduit Bender for 1/2" to 2" EMT, IMC, and Rigid Aluminum
116
95R7
Cat. No.
UPC No.
Description
854
03106
38780
38148
01700
38780
38148
01700
Quad Bender for 1/2" - 2" EMT, IMC, Rigid and Rigid Aluminum,
conduit
Shoe Unit, 1/2" - 1-1/4"
Shoe Unit, 1-1/2" - 2"
40 MIL PVC Coated Rigid Shoe Group, 1/2"-2"
SPECIFICATIONS
Capacity
Power Source
Weight
Centerline Bending Radii
Shoe Size
Inches
1/2" EMT
4-5/16"
1/2" IMC/Rigid
4-1/4"
3/4" EMT
5-1/2"
3/4" IMC/Rigid
5-7/16"
mm
109.5
108.0
139.7
138.1
Shoe Size
1" EMT
1" IMC/Rigid
1-1/4" EMT
1-1/4" IMC/Rigid
Inches
7"
6-15/16"
8-13/16"
8-3/4"
1/2"- 2" EMT, IMC, Rigid and Rigid Aluminum conduit
120 VAC; 20 Amp
510 lbs. (231.3 kg)
mm
177.8
176.2
223.8
222.3
Shoe Size
1-1/2" EMT
1-1/2" IMC/Rigid
2" EMT
2" IMC/Rigid
Inches
8-3/8"
8-1/4"
9-1/4"
9"
mm
212.7
209.6
235.0
228.6
www.greenlee.com
555® Series Electric Conduit Benders for 1/2" through 2" Conduit and Pipe
95R7
Description
555
555R
39780
23446
555E
27989
555I
27990
555-22
39971
555R-22
07145
555C
555RC
06900
06901
555EC
06902
555IC
06903
37279
37279
53389
53389
Deluxe Electric Bender power unit without bending accessories
Deluxe Electric Bender with Shoe Group for 1/2" through 2" Rigid
and 1/2" through 1-1/4" IMC conduit and pipe includes 28007 −
1/2" - 2" Rigid Shoe Group
Deluxe Electric Bender with Shoe Group for 1/2" through 2" EMT
conduit includes 23802 − 1/2" - 2" EMT Shoe Group
Deluxe Electric Bender with Shoe Group for 1-1/2" through 2"
IMC conduit includes 26330 − 1-1/2" - 2" IMC Shoe Group
220 VAC 50/60 Cycle Deluxe Electric Bender power unit without
bending accessories
220 VAC 50/60 Cycle Deluxe Electric Bender power unit with
Shoe Group for 1/2" through 2" Rigid and 1/2" through 1-1/4"
IMC conduit and pipe includes 28007 − 1/2" - 2" Rigid Shoe
Group
Classic Electric Bender power unit without bending accessories
Classic Electric Bender with Shoe Group for 1/2" through 2" Rigid
and 1/2" through 1-1/4" IMC conduit and pipe; includes 28007 −
1/2" - 2" Rigid Shoe Group
Classic Electric Bender with Shoe Group for 1/2" through 2" EMT
conduit includes 23802 − 1/2" -2" EMT Shoe Group
Classic Electric Bender with Shoe Group for 1-1/2" through 2"
IMC conduit includes 26330 − 1-1/2" - 2" IMC Shoe Group
40 MIL PVC Coated Rigid 1/2" - 2" Shoe Group (sold separately)
to use with the 555 series benders
PIN-HITCH .437x8.10 – Weight .39
No Flat Tires
555RC Classic
SPECIFICATIONS
Capacity
Power
Source
= new product
= Replacement Part
EMT
4-1/4"
(10.80 cm)
5-3/8" (13.65 cm)
6-3/4"
(17.15 cm)
8-3/4"
(22.22 cm)
8-9/32" (21.03 cm)
9-3/16" (23.33 cm)
= Accessory
RIGID
4-1/4"
(108 mm)
5-7/16" (138 mm)
6-5/16" (176 mm)
8-3/4"
(222 mm)
8-1/4"
(209 mm)
9-1/2"
(241 mm)
IMC
4-1/4"
(108 mm)
5-7/16" (138 mm)
6-5/16" (176 mm)
8-3/4"
(222 mm)
8-9/32" (210 mm
9-3/16" (233 mm)
117
INTERNATIONAL
555 Centerline Bending Radii
Shoe Size
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
Tel: +1.815.397.7070
Fax: +1.815.397.9247
555/555C: 260 lbs. (118 kg)
555R/555RC: 393 lbs. (179 kg)
555E/555EC: 476 lbs. (216 kg)
555l/555IC: 456 lbs. (207 kg)
555 Deluxe Series: 44" (1118 mm)
555 Deluxe Series: 29-5/8" (753 mm)
555 Deluxe Series: 28-1/2" (724 mm)
CANADA
Height
Width
Depth
0-98%
Tel: 800.435.0786
Fax: 800.524.2853
Operating
Temperature
Relative
Humidity
Weight
555R/555RC: 1/2" - 2" Rigid and 1/2" - 1-1/4" IMC conduit
555E/555EC: 1/2" - 2" EMT conduit
555l/555IC: 1-1/2" and 2" IMC conduit
555 Deluxe Series: 120 VAC; 20 Amp GFCI-protected receptacle
555-22/555R-22: 220 VAC 50/60 Cycle; 20 Amp GFCI-protected
receptacle
555C Classic Series: 120 VAC; 20 amp GFCI-protected
receptacle
-5° F to 120° F (-20° C to 49° C)
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
Bending
• Available in four models for Rigid, EMT or IMC conduit, or bender
only without shoes.
• The optional PVC-coated Rigid conduit shoe group can be used
on all 555 series benders.
Deluxe Only
• 555 Deluxe Series features unique electrical controls that reduce
the in-rush current to the relays to minimize contact arcing for
longer life, heavy-duty no flat pneumatic tires and UL/ULC approved.
Classic Only
• The 555C Classic Series features simple relay controls for easy field
repairs, and compact handle design to prevent interference with conduit
when bending.
555R Deluxe
MADE FOR THE TRADE!™
Bending
555® Accessory Shoe Groups
23802
Key
1
2
3
4
5
1/2" - 2" EMT Shoe Group consists of one each:
UPC No.
Cat. NO.
Description
17944
17944
1/2" through 1-1/4" EMT Bending Shoe
17986
17986
1/2" through 1-1/4" Support Roller
23499
23499
1-1/2" EMT Bending Shoe
23505
23505
2" EMT Bending Shoe
23541
23541
1-1/2" through 2" Roller Support Unit
1723
23818
Metal Storage Box (not shown)
23816
Key
3
4
5
1-1/2" AND 2" EMT Shoe Group consists of one each:
UPC No.
Cat. NO.
Description
23499
23499
1-1/2" EMT Bending Shoe
23505
23505
2" EMT Bending Shoe
23541
23541
1-1/2" through 2" Roller Support Unit
26330
Key
6
7
8
1-1/2" and 2" IMC Shoe Group consists of one each:
Cat. NO.
UPC No.
Description
25263
25263
1-1/2" IMC Bending Shoe
25268
25268
2" IMC Bending Shoe
25273
25273
1-1/2" through 2" Roller Support Unit
1723
23818
Metal Storage Box (not shown)
28007
Key
9
10
11
12
1/2" - 2" Rigid Shoe Group consists of one each:
UPC No.
Cat. NO.
Description
00571
00571
1/2" through 1-1/4" Rigid/IMC Bending Shoe
00936
00936
1/2" through 1-1/4" Support Roller
17937
17937
1-1/2" through 2" Rigid Bending Shoe
17984
17984
1-1/2" through 2" Support Roller
37279
Key
13
14
15
16
40 Mil PVC Coated Rigid 1/2" - 2" Shoe Group consists of one each:
UPC No.
Cat. NO.
Description
00946
00946
1/2" through 1-1/4" Roller Support
00573
00573
1/2" through 1-1/4" Shoe
37281
37281
1-1/2" and 2" Shoe
37282
37282
1-1/2" through 2" Roller Support
1723
23818
Metal Storage Box (not shown)
1
3
2
4
5
6
8
7
10
9
14
11
15
12
16
13
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
To use the PVC Shoe Group with 555 SB and 555 SBR benders Adapter Set 32391 is required.
118
HYDRAULIC BENDERS
Flip-Top® Benders for 1-1/4" - 2" EMT, IMC and Rigid
• Choose 882 for EMT or 882CB models for EMT, IMC
and Rigid Conduit.
• Simple, accurate and easy to use.
• Flip-Top hinged frame top plate opens for easy,
fast loading and unloading.
• Ram travel scale and charts for accurate bends,
offsets and saddles.
Flip-Top® Bender Centerline Bending Radii
882, 882CB
882CB
SIZE
EMT
RIGID
IMC
1-1/4" 7-7/32" (183.4 mm) 7-1/4" (184.2 mm) 7-1/4" (184.2 mm)
1-1/2" 8-1/16" (204.8 mm) 8-1/4" (209.5 mm) 8-1/4" (209.5 mm)
2"
9-5/16" (236.5 mm) 8-7/8" (225.4 mm) 8-7/8" (225.4 mm)
Cat. No.
UPC No.
Description
882
15128
882CB
29536
882CBH755
29537
882CBE975
34202
882H755
16460
882E975
34201
882RIG1
29948
Flip-Top Bender for 1-1/4", 1-1/2" and 2" EMT Conduit without
Hydaulic Pump
Flip-Top Bender with shoes for 1-1/4", 1-1/2" and 2" EMT, IMC
and Rigid Conduit without Hydraulic Pump
Flip-Top Bender with shoes for 1-1/4", 1-1/2" and 2" EMT, IMC
and Rigid Conduit with 755 Hand Hydraulic Pump
Flip-Top Bender with shoes for 1-1/4", 1-1/2" and 2" EMT, IMC
and Rigid Conduit with 975 Electric Hydraulic Pump
Flip-Top Bender for 1-1/4", 1-1/2" and 2" EMT Conduit with
755 Hand Hydraulic Pump
Flip-Top Bender for 1-1/4", 1-1/2" and 2" EMT Conduit with
975 Electric Hydraulic Pump
Conversion Attachment Set - Converts 882 to 882CB by adding
the shoes, follow bars and saddles for 1-1/4", 1-1/2" and 2"
IMC and Rigid Conduit
SPECIFICATIONS
Capacity
Weight
882-1-1/4", 1-1/2" and 2" EMT
882-141 lbs (64 kg)
882CB-1-1/4", 1-1/2" and 2" EMT, IMC and Rigid
882H755- 161 lbs (73 kg)
Power Source
882CBH755- 217 lbs (99 kg)
755- Hydraulic Hand Pump
882CBE975- 264 lbs (120 kg)
975- 120 VAC Electric Hydraulic Pump
882E975- 195 lbs (89 kg)
976-22PS- 220 VAC 50/60 Cycle Electric Hydraulic Pump 882CB- 205 lbs (93 kg)
www.greenlee.com
Flip-Top® Benders and Shoe Groups
D
E
I
F
H
L
C
O
A
I
Q
B
Bending
R
BENDERS
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
SHOE GROUP
882RIG1
1
1
1
1
1
1
1
1
1
1
119
INTERNATIONAL
= Accessory
882CB
1
1
1
1
1
1
1
1
2
1
2
1
1
CANADA
= Replacement Part
882
1
1
1
1
1
1
1
1
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
USA
Description
12-Ton Hydraulic Ram with 4018GB female quick Coupler
3/8" x 6' (9.5 x 1829 mm) Hydraulic Hose with two 4033GB male quick couplers
Yoke
Yoke Pin
Frame Unit (includes F thru K)
Upper Connecting Plate Unit
Lower Connecting Plate Unit
Hinge Pin
Retaining Ring
Roller Unit with pin (L)
Anchor Stud
Hitch Pin, 3/8 x 1-1/2
Saddle Pin
Scale Jam Nut
Scale O-Ring
Scale Piston
Steel Storage Box (not shown)
1-1/4" EMT Shoe
1-1/4" EMT Follow Bar
1-1/4" EMT Saddle
1-1/2" EMT Shoe
1-1/2" EMT Follow Bar
1-1/2" EMT Saddle
2" EMT Shoe
2" EMT Follow Bar
2" EMT Saddle
1-1/4" IMC and Rigid Shoe
1-1/4" IMC and Rigid Follow Bar
1-1/4" IMC and Rigid Saddle
1-1/2" IMC and Rigid Shoe
1-1/2" IMC and Rigid Follow Bar
1-1/2" IMC and Rigid Saddle
2" IMC and Rigid Shoe
2" IMC and Rigid Follow Bar
2" IMC and Rigid Saddle
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
UPC No.
15129
11289
15145
04086
16563
15136
15135
15150
50283
38778
15147
54303
29937
50848
52867
21954
23274
11146
11126
11075
14287
11107
11072
11132
11089
14279
29474
29477
29465
29470
29472
29464
29466
29468
29463
Tel: 800.435.0786
Fax: 800.524.2853
CAT NO.
1738
11289
15145
04086
16563
15136
15135
15150
50283
38778
15147
54303
29937
50848
52867
21954
1531
11146
11126
11075
14287
11107
11072
11132
11089
14279
29474
29477
29465
29470
29472
29464
29466
29468
29463
Tel: 800.435.0786
Fax: 800.451.2632
Key
A
B
C
D
E
F
G
H
I
J
K
L
N
O
O
O
P
Q
R
P
Q
R
P
Q
R
P
Q
R
P
Q
R
P
Q
R
P
N
G
K
J
MADE FOR THE TRADE!™
Cam Track® Conduit Benders for 2-1/2" to 4" EMT, IMC and Rigid
Bending
•
•
•
•
•
•
One bender to bend EMT, IMC and Rigid Conduit.
Fast and easy setup on the jobsite.
True One-Shot 90° bends with CT models for quick accurate bends.
Steel reinforced follow bars for long life.
Bend a 90° elbow in 4" Rigid conduit in 95 seconds.
Optional 1813 Bending Table and accessories for easier operation.
Shown with OPTIONAL 1813
Bending Table & optional 980 pump
SPECIFICATIONS
Capacity
Power Source
Weight
2-1/2" - 4" EMT, IMC and Rigid
980: 120 VAC Electric Powered Hydraulic Pump
980-22PS: 220 VAC 50/60 Cycle Electric Powered
Hydraulic Pump
881CTE980: 999 lbs. (454 kg)
881CTDE980: 1026 lbs. (465 kg)
881 BASIC: 358 lbs. (163 kg)
27555: 137 lbs. (62 kg)
31274: 183 lbs. (83 kg)
Cat. No.
UPC No.
Description
881CT
31287
881CTE980
34208
881CTD
38466
881CTDE980
38467
881BASIC
35711
27554
27555
31281
31274
1813
27554
27555
31281
31274
28901
Cam Track Conduit Bender for One-Shot 90° Bends
in 2-1/2", 3", 3-1/2" and 4" EMT, IMC and Rigid
conduit, without hydraulic pump
Cam Track Conduit Bender for One-Shot 90° Bends
in 2-1/2", 3", 3-1/2" and 4" EMT, IMC and Rigid
conduit, with 980 Electric Hydraulic Pump
Cam Track Conduit Bender for One-Shot 90° Bends
in 2-1/2", 3" and 4" EMT, IMC and Rigid conduit,
without hydraulic pump & 3-1/2" shoe group
Cam Track Conduit Bender for One-Shot 90° Bends
in 2-1/2", 3" and 4" EMT, IMC and Rigid conduit,
with 980 Electric Hydraulic Pump, without 3-1/2"
shoe group
Conduit Bender without shoe groups or hydraulic
pump
2-1/2" - One-Shot 90° EMT, IMC, Rigid Shoe Group
3" - One-Shot 90° EMT, IMC, Rigid Shoe Group
3-1/2" - One-Shot 90° EMT, IMC, Rigid Shoe Group
4" - One-Shot 90° EMT, IMC, Rigid Shoe Group
Bending Table for 881 Bender
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cam Track® Bender Centerline Bending Radii
for EMT, IMC and Rigid Conduit
881 CT, 881 CTD, 881 BASIC
Centerline
Radius
Shoe
Group
Degree
of Bend
2-1/2"
13-1/2" (342.9 mm)
27554
90
3"
SIZE
16" (406.4 mm)
27555
90
3-1/2"
18-5/8" (473.1 mm)
31281
90
4"
20-7/8" (530.2 mm)
31274
90
Cam Track® Benders and Shoe Groups
A
B
C
J
G
H
F
USA
Tel: 800.435.0786
Fax: 800.451.2632
F
120
D
E
M
N
T
O
P
F
U
F
www.greenlee.com
BENDERS
Key
cat. no.
UPC No.
Description
A
27416
27416
B
27417
C
30309
D
SHOE GROUPS
881CT
881CTD
40-Ton Hydraulic Ram with 4018GB
female quick coupler. The ram includes
Keys B, G, and two clips from Key F.
1
1
1
27417
Cylinder Block
1
1
1
30309
Yoke
1
1
1
26309
26309
Connecting Bar Unit
2
2
2
E
27364
27364
Roller Unit-The roller unit includes
two clips from Key F
1
1
1
F
50302
50302
Hitch Pin Clips
6
6
6
G
27381
27381
Cylinder Block Pin Unit
2
2
2
27554
27555
31281
31274
Bending
881BASIC
26306
Yoke Pin
1
1
1
26349
26349
Spring Clip (secures Yoke Unit to Ram)
1
1
1
11289
11289
3/8" x 6' (9.5 x 1829 mm)
Hydraulic Hose with two
4033GB male quick couplers
1
1
1
M
26624
26624
Saddle Pin Unit - includes 1 clip
from Key F
1
1
1
N
26297
26297
2-1/2" Shoe 90°
1
1
1
P
26366
26366
2-1/2" Follow Bar 90°
1
1
1
O
26580
26580
2-1/2" Saddle
1
1
1
N
26300
26300
3" Shoe 90°
1
1
1
P
35400
35400
3" Follow Bar 90°
1
1
1
O
26584
26584
3" Saddle
1
1
1
O
26588
26588
3-1/2" Saddle
1
1
T
31882
31882
3-1/2" Shoe 90°
1
1
U
31881
31881
3-1/2" Follow Bar 90°
1
1
O
26594
26594
4" Saddle
1
1
1
T
31884
31884
4" Shoe 90°
1
1
1
U
31883
31883
4" Follow Bar 90°
1
1
1
2460
23363
Steel Storage Box (not shown)
1
1
1
695
30239
Caster Set (not shown)
1
1
1
Bending Table (only) for 881 & 881CT Benders
F
E
G
I
H
J
Cat. No.
UPC No.
Description
WEIGHT
1813
28901
Bending Table for 881 & 881CT
Bender
186 lbs (85 kg)
= new product
= Replacement Part
= Accessory
Key
A
B
C
D
E
F
G
H
I
J
L
cat. no.
21541
28900
28885
29004
29022
1805
53824
51185
29014
53014
21346
1531
51593
50975
51674
UPC No.
21541
28900
28885
29004
29022
21318
53824
51185
29014
53014
21346
23274
51593
50975
51674
Description
Leg Support Unit
Carriage Unit w/vise
Bender Mounting Unit
Pump Table Support
Ram Positioner
Bending Degree Protractor
Pump Bracket
Pump Mounting Screw
90° Coupling Unit
Steel Conduit Clamp
Legs
Steel Storage Box (not shown)
Hex Nut
Cap Screw
Washer
1813/
28901
2
1
1
2
1
1
4
4
1
4
4
1
4
4
Tel: +1.815.397.7070
Fax: +1.815.397.9247
A
L
D
C
4
121
INTERNATIONAL
B
A
PARTS
CANADA
Converts the 881 Bender into a comfortable, bench-high
machine . . . reduces operator fatigue . . . makes loading faster,
easier.
Offset and one-shot bends in all three types of conduit are made
quickly and easily with consistent accuracy.
Pipe vise holds conduit securely for accurate bends. Prevents
conduit from twisting or turning during bend.
Includes 1805 Bending Degree Protractor and metal storage box.
Tel: 800.435.0786
Fax: 800.524.2853
•
•
•
•
USA
26306
J
Tel: 800.435.0786
Fax: 800.451.2632
H
MADE FOR THE TRADE!™
Rigid Conduit Bender for 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2"
• Strong, portable pin-assembled aluminum components.
• Easy-to-use ram travel scale and bending charts.
• Conduit supports index to suit all sizes.
E
B
A
C
D
H
F
Bending
G
C
Cat. No.
UPC No.
Description
Key
880
16480
880H755
16464
1", 1-1/4", 1-1/2" and 2" Rigid Conduit Bender
without hydraulic pump
1", 1-1/4", 1-1/2" and 2" Rigid Conduit Bender
with 755 Hand Hydraulic Pump
1", 1-1/4", 1-1/2" and 2" Rigid Conduit Bender
with 975 Electric Hydraulic Pump
Bending Table (Optional)
Conduit Support Pin for use with 1802 Bending
Table - (2) Required
1/2" Shoe (Optional)
3/4" Shoe (Optional)
A
747
16249
15-Ton Hydraulic Ram with
4018GB female quick coupler,
includes Keys F, G and one H
1
B
03396
03396
Frame Unit
1
880E975
34200
1802
21357
21257
21357
10917
10918
10917
10918
Rigid Shoe Size
1/2" 3/4" 1"
CANADA
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Bending Radius-cm
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
Bending Radius-Inches 4"
Tel: 800.435.0786
Fax: 800.451.2632
K
D
Centerline Bending Radii for 880 & 880 PVC Benders
122
I
1-1/4" 1-1/2" 2"
4-1/2" 5-3/4" 7-1/4" 8-1/4" 9-1/2"
10.16 11.43 14.60 18.41 20.95 24.13
SPECIFICATIONS
Capacity
Power Source
Weight
880: 1" - 2" Rigid Conduit
755: Hydraulic Hand Pump
975: 120 VAC Electric Hydraulic Pump
980: 120 VAC Electric Hydraulic Pump
880: 113 lbs. (52 kg)
880H755: 135 lbs. (61 kg)
880E975: 172 lbs. (78 kg)
cat. no.
UPC No.
Description
880
C
03400
03400
Conduit Support
2
D
13679
13679
Conduit Support Pin
2
E
11289
11289
3/8" x 6' (9.5 x 1829 mm)
Hydraulic Hose with two
4033GB male quick couplers
1
F
15829
15829
Cylinder Head Pin Unit with
Spring Clips 2725AA (Key G)
2
G
50302
50302
Spring Clips
2
H
10826
10826
Ram Pin, Shoe Pin
2
I
10939
10939
Shoe Support
1
K
10919
10919
1" Shoe – Rigid
1
K
10920
10920
1-1/4" Shoe – Rigid
1
K
10921
10921
1-1/2" Shoe – Rigid
1
K
10922
10922
2" Shoe – Rigid
1
14909
14909
Steel Storage Box (not shown)
1
www.greenlee.com
Rigid Conduit Bender for 1-1/4" - 2" One-Shot 90°s and 2-1/2" - 4" Segment Bending
• Strong, portable pin-assembled aluminum components.
• Easy-to-use ram travel scale and bending charts.
• Conduit supports index to suit all sizes.
A
D
G
E
J
D
C
I
K
L
G
B
H
Centerline Bending Radii for 777 Benders
Segment Bend only
Rigid Shoe Size
1-1/4" 1-1/2"
2"
2-1/2"
3"
Bending Radius-Inches 7-1/4" 8-1/4" 9-1/2" 11-7/16" 13-3/4"
Bending Radius-mm
184.1 209.5 241.3 290.5
349.3
Weight
1-1/4" - 4" Rigid Conduit
755: Hydraulic Hand Pump
975: 120 VAC Electric Hydraulic Pump
980: 120 VAC Electric Hydraulic Pump
777: 164 lbs. (75 kg)
777HC755: 173 lbs. (79 kg)
777E975: 508 lbs. (231 kg)
16" 18-1/4"
406.4 463.6
777
16491
777HC755
16470
777E975
34198
1802
21359
21257
21359
1-1/4" through 2" One-Shot and 2-1/2" through 4" Segment,
Rigid Conduit Bender without hydraulic pump
1-1/4" through 2" One-Shot and 2-1/2" through 4" Segment,
Rigid Conduit Bender with 755 Hand Hydraulic Pump
1-1/4" through 2" One-Shot and 2-1/2" through 4" Segment,
Rigid Conduit Bender with 975 Electric Hydraulic Pump
Bending Table (Optional)
Conduit Support Pin for use with 1802 Bending Table - (2)
Required
UPC No.
Description
1736
13251
27-Ton Hydraulic Ram with 4018GB female
quick coupler, includes Keys C thru E
1
777
B
11289
11289
3/8" x 6' (9.5 x 1829 mm) Hose with
two 4033GB male quick couplers
1
C
13252
13252
Cylinder Head Pin Unit with Spring Clip
2725AA (Key D)
2
D
50302
50302
Spring Clip
2
E
10826
10826
Ram Pin
1
F
13232
13232
Frame Unit
1
G
13193
13193
Conduit Support
2
H
14496
14496
Conduit Support Pin
2
I
10939
10939
Small Shoe Support 1/2" thru 2"
1
J
10826
10826
Shoe Pin
1
K
90° Aluminum Bending Shoes
10920
10920
1-1/4" Shoe
1
10921
10921
1-1/2" Shoe
1
10922
10922
2" Shoe
1
L
Aluminum Segment Bending Shoes
13208
13208
2-1/2" Shoe
1
13209
13209
3" Shoe
1
13210
13210
3-1/2" Shoe
1
13211
13211
4" Shoe
1
M
13382
13382
Steel Storage Box (not shown)
1
= Replacement Part
= Accessory
123
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
cat. no.
A
Tel: 800.435.0786
Fax: 800.524.2853
Key
Tel: 800.435.0786
Fax: 800.451.2632
Capacity
Power Source
4"
Description
USA
SPECIFICATIONS
3-1/2"
UPC No.
Bending
H
F
C
Cat. No.
MADE FOR THE TRADE!™
Rigid Conduit Benders for One-Shot 90°s in 1-1/4" - 4" (5" with Segment Bending Shoe)
Bending
•
•
•
•
•
•
Strong, yet lightweight, portable, pin-assembled aluminum components.
Easy-to-use ram travel scale and charts for accurate bends.
Make elbows, offsets and saddles.
Both 884 and 885 bend One-Shot 90°s in 1-1/4" - 4" Rigid conduit.
Optional shoes available to bend PVC-coated Rigid conduit.
Optional 1802 Bending Table available for easier operation.
Shown with OPTIONAL 1802
Bending Table & optional 980 pump
SPECIFICATIONS
Capacity
884: 1-1/4" - 4" Rigid conduit.
884PVC: 1-1/4" - 4" 40 mil PVC Coated Rigid Conduit
885: 1-1/4" - 5" Rigid Conduit
980: 120 VAC Electric Powered Hydraulic Pump
980-22PS: 220 VAC 50/60 Cycle Electric Powered
Hydraulic Pump
884: 421 lbs. (191 kg)
884E980: 494 lbs. (225 kg)
884PVC: 388 lbs. (176 kg)
885: 449 lbs. (204 kg)
885E980: 527 lbs. (239 kg)
Power Source
Weight
Cat. No.
UPC No. Description
884
16477
884E980
34209
884PVC
33614
885
16751
885E980
34210
1802
21257
1-1/4" through 4" Rigid Conduit Bender, without hydraulic
pump
1-1/4" through 4" Rigid Conduit Bender, with 980 Electric
Hydraulic Pump
1-1/4", 1-1/2", 2", 3" and 4" PVC Coated Rigid Conduit
Bender without hydraulic pump
1-1/4" through 4" One-Shot and 5" Segment Rigid Conduit
Bender, without hydraulic pump
1-1/4" through 4" One-Shot and 5" Segment Rigid Conduit
Bender, with 980 Electric Hydraulic Pump
Bending Table (0ptional)
Shoes for 40 mil PVC Coated Rigid Conduit on page 125
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Rigid Conduit Benders for One-Shot 90°s in 1-1/4" - 4" (5" with Segment Bending Shoe)
A
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
G
B
D
E
F
K
G
L
C
O
J
D
124
F
I
E
N
H
M
884 & 885 Centerline Bending Radii
SIZE
Rigid
SIZE
1-1/4" 7-1/4" (184.1 mm)
1-1/4"
1-1/2" 8-1/4" (209.5 mm)
1-1/2"
2"
9-1/2" (241.3 mm)
2"
2-1/2" 12-1/2" (317.5 mm)
2-1/2"
3"
15" (381 mm)
3"
3-1/2" 17-1/2" (444.5 mm)
3-1/2"
4"
20" (508 mm)
4"
5"
25" (635 mm) (885 only)
PVC Rigid
7-1/4" (184.1 mm)
8-1/4" (209.5 mm)
9-1/2" (241.3 mm)
11-7/16" (290.5 mm)
13-3/4" (349.3 mm)
16" (406.4 mm)
18-1/4" (463.5 mm)
N
Key
A
B
C
D
E
F
G
H
I
J
K
L
M
N
N
N
N
N
N
N
O
N
N
N
N
N
cat. no.
1737
16754
11289
15671
33454
16747
16753
50302
25184
10946
10939
16741
10963
10826
2050
10920
10921
10922
10923
10924
10925
14265
15669
33459
33463
33462
34340
34344
34329
UPC No.
16752
16754
11289
15671
33454
16747
16753
50302
25184
10946
10939
16741
10963
10826
19811
10920
10921
10922
10923
10924
10925
14265
15669
33459
33463
33462
34340
34344
34329
Description
884 884PVC 885
27-Ton Hydraulic Ram with 4018GB
female quick coupler, includes Keys F thru I. 1
1
1
Frame unit
1
1
1
3/8" x 6' (9.5 x 1829 mm) Hydraulic Hose
with two 4033GB male quick couplers
1
1
1
Conduit Support
2
2
Conduit Support (not shown)
2
Conduit Support pin
2
2
2
Cylinder Head Pin Unit with Spring
Clip 2725AA
2
2
2
Spring Clip
2
2
2
Ram Pin
1
1
1
Large Ram Pin
2
2
2
Small Shoe Support (1/2" through 2")
1
1
1
Large Shoe Support (2-1/2" through 4")
1
1
1
Large Shoe Pin
1
1
1
Small Shoe Pin
1
1
1
Steel Storage Box (not shown)
1
1
1
1-1/4" Shoe – Rigid
1
1
1-1/2" Shoe – Rigid
1
1
2" Shoe – Rigid
1
1
2-1/2" Shoe – Rigid
1
1
3" Shoe – Rigid
1
1
3-1/2" Shoe – Rigid
1
1
4" Shoe – 20" centerline radius – Rigid
1
1
5" Shoe – Rigid
1
1-1/4" Shoe – PVC
1
1-1/2" Shoe – PVC
1
2" Shoe – PVC
1
3" Shoe – PVC
1
1
4" Shoe – PVC
7/8" Wrench (not shown)
1
www.greenlee.com
Accessories for Bending 40 Mil PVC-Coated Rigid Conduit for 880 and 884 Benders
• Special size shoes and supports for bending 40 mil PVC-Coated
Rigid conduit.
• Two conduit supports to fit your bender are required. Shoes for
1-1/2" or larger have a cam device to force the conduit out of the
shoe after bending. This requires a wrench to turn the cam.
SHOE UNITS
BENDERS / PARTS
UPC No. Description
884PVC
33614
An 884 Bender with shoes, supports and wrench
for bending 1-1/4", 1-1/2", 2", 3" and 4" 40 mil
PVC Coated Rigid conduit. In a steel storage box.
(See 884 Conduit Bender for details)
Cat.
No.
33456
33457
33458
33459
33463
33462
34321
34340
34342
34344
33455
33454
34329
UPC
no.
33456
33457
33458
33459
33463
33462
34321
34340
34342
34344
33455
33454
34329
Description
Shoe Unit 4" (101.6 mm) Centerline Radius
Shoe Unit 4-1/2" (114.3 mm) Centerline Radius
Shoe Unit 5-3/4" (146.1 mm) Centerline Radius
Shoe Unit 7-1/4" (184.2 mm) Centerline Radius
Shoe Unit 8-1/4" (209.6 mm) Centerline Radius
Shoe Unit 9-1/2" (241.3 mm) Centerline Radius
Shoe Unit 11-7/16" (290.5 mm) Centerline Radius
Shoe Unit 13-3/4" (349.3 mm) Centerline Radius
Shoe Unit 16" (406.4 mm) Centerline Radius
Shoe Unit 18-1/4" (463.6 mm) Centerline Radius
880 Conduit Support – 2 Required
884 Conduit Support – 2 Required
7/8" Wrench. Use with 1-1/2" and larger shoes
Bending
Cat. No.
40 MIL PVC
Coated Rigid
Conduit Size
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
—
—
—
Bending Table (only) for 777, 880, 884 and 885 Rigid Conduit Benders
1802
21359
21257
21359
21357
21357
F
D
H
I
B
E
G
Key
A
B
C
D
E
F
G
H
I
cat. no.
21541
21545
1805
21542
21543
21544
21360
21413
21346
1531
UPC No.
21541
21545
21318
21542
21543
21544
21360
21413
21346
23274
Description
Leg Support Unit
Bender Bracket Unit
Bending Degree Protractor
Chain Idler Unit
Crank Bracket Unit
Pipe Vise Unit
Pipe Support Pin –
1-1/2" for 884 and 885 Bender
Chain Extension Kit
Legs
Steel Storage Box (not shown)
SPECIFICATIONS
Capacity
Weight
= new product
= Replacement Part
= Accessory
777, 880, 883, 884 and 885 Benders
180 lbs. (82 kg)
1802
2
1
1
1
1
1
2
1
4
1
Tel: +1.815.397.7070
Fax: +1.815.397.9247
A
C
125
INTERNATIONAL
A
PARTS
Tel: 800.435.0786
Fax: 800.524.2853
NOTE: To complete setup as shown two 10-foot (3.04 m) lengths of 2" Rigid conduit and Bender are required (purchased separately).
Typical setup with bender (see note)
Shown with 884 Bender and
980 Pump
CANADA
Bending Table - includes pipe support pins for 884 or 885 Benders
Pipe support Pin for use with 777, 883 and 883-4 Benders, two (2)
are required (Optional)
Pipe Support Pin for use with 880 Bender, two (2) are required
(Optional)
USA
Cat. No. UPC No. Description
Tel: 800.435.0786
Fax: 800.451.2632
• Make bending easier, faster and more accurate.
• Insert conduit to be bent in chain vise, tighten. Turn handle to move the
chain vise and position conduit for bending.
• Use the Bending Degree Protractor and the movable chain vise to advance
conduit while making segment and other multi-shot large sweep bends.
• Includes 1805 Bending Degree Protractor and metal storage box.
MADE FOR THE TRADE!™
BENDER ACCESSORIES
L97 Mini-Magnet Laser Level
Bending
• Professional grade laser level.
• Mini-torpedo design with handy “no-dog” attachment for bending.
• Three rare-earth magnets provide superior holding strength.
• Compact size with 80-plus yard range.
• Laser is capable of working on all planes.
• Four vial design - 0°, 90°, 45°, and 30°.
• V-groove on bottom for mounting on curved surface.
• Offsets and calculations permanently laser-engraved onto level.
• Requires (2) "N" style batteries.
Cat. No.
UPC No.
Description
L97
03582
Laser, Level
SPECIFICATIONS
Length
Width
5-1/16" (143 mm)
Weight
7.3 oz with batteries
3/4" (19 mm) Height 1-13/16" (46 mm)
L77 Mini Magnetic Bubble Level
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Cat. No.
UPC No.
Description
L77
11617
Mini Magnetic Bubble Level
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
• Professional grade level with bending offset aid.
• Mini torpedo design with handy “no-dog” attachment for bending.
• Three rare-earth magnets provide superior holding strength.
• Four vial design - 0°, 90°, 45°, and 30°.
• Machined from aluminum alloy and anodized to aircraft standards.
• Compact size fits easily in tool pouch.
• V-groove on bottom for mounting on curved surface.
126
Length
Width
Height
5-1/2" (140 mm)
3/4" (19 mm)
1-1/2" (38 mm)
L107 Electrician’s Torpedo Level
• Professional grade level.
• Four open vial ports for easy viewing from all sides.
• Perfect for pipe and conduit work.
• Four rare-earth magnets allow for hands-free use on metal surfaces.
• Four vial design - 0°, 30°, 45°, and 90°.
• Machined from aluminum alloy and anodized to aircraft standards.
• V-groove on bottom for mounting on curved surface.
• Offsets and calculations permanently laser-engraved onto level.
Cat. No.
UPC No.
Description
L107
03583
Level, Torpedo
SPECIFICATIONS
Length
Width
8-1/2" (215.9 mm)
Weight
5.5 oz
3/4" (19 mm) Height 1-1/4" (31.8 mm)
www.greenlee.com
Protractor with Magnetic Base
Cat. No.
UPC No.
Description
1895
35905
Angle Protractor with Magnetic Base
SPECIFICATIONS
Weight
0.4 lbs. (0.2 kg)
• Use to make concentric offset or large-radius bends.
• Bender must be mounted on a bending table . . .
and pipe bent in a vertical position.
• Quick-adjusting, chain-type clamp for easy mounting to
all conduit and pipe sizes.
• Face of protractor rotates to compensate for any surface that is not level.
Cat. No.
UPC No.
Description
1805
21318
Bending Degree Protractor
Bending
Bending Degree Protractor for use with 1802 and 1813 Bending Tables
SPECIFICATIONS
Capacity
Weight
Protractor face is graduated in quadrants of 18, 20, 21 and 30 shots
2 lbs. (.91 kg)
Bending Handbook and Slide Rule Bending Calculators
38405
38409
38406
38405
38409
38406
38407
38408
38407
38408
Bending Book, English
Bending Book, French
Slide Rule Calculator for 777, 880, 883, 884
and 885 Benders
Slide Rule Calculator for segment bends
Slide Rule Calculator for 881 and 882 Benders
Conduit Size Chart
Outside Dia.
Inches
mm
.706
.922
1.163
1.510
1.740
2.197
2.875
3.500
4.000
4.500
—
—
.815
1.029
1.290
1.638
1.883
2.360
2.857
3.476
3.971
4.466
—
—
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
= new product
17.9
23.4
29.5
38.4
44.2
55.8
73.0
88.9
101.6
114.3
—
—
.622
.824
1.049
1.380
1.610
2.067
2.731
3.356
3.834
4.334
—
—
= Replacement Part
15.8
20.9
26.6
35.1
40.9
52.5
69.4
85.2
97.4
110.1
—
—
= Accessory
.042
.049
.057
.065
.065
.065
.072
.072
.083
.083
—
—
1.1
1.3
1.5
1.7
1.7
1.7
1.8
1.9
2.1
2.1
—
—
IMC INTERMEDIATE CONDUIT
Inside Dia.
Wall Thickness
Inches
mm
Inches
mm
20.7
26.1
32.8
41.6
47.8
59.9
72.6
88.3
100.9
113.4
—
—
.675
.879
1.120
1.468
1.703
2.170
2.597
3.216
3.711
4.206
—
—
17.1
22.3
28.4
37.3
43.3
55.1
66.0
81.7
94.3
106.8
—
—
.070
.075
.085
.085
.090
.095
.130
.130
.130
.130
—
—
1.8
1.9
2.2
2.2
2.3
2.4
3.3
3.3
3.3
3.3
—
—
RIGID CONDUIT STEEL OR ALUMINUM
Outside Dia.
Inside Dia.
Wall Thickness
Inches
mm
Inches
mm
Inches
mm
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
21.3
26.7
33.4
42.2
48.3
60.3
73.0
88.9
101.6
114.3
141.3
168.3
.622
.824
1.049
1.380
1.610
2.067
2.469
3.068
3.548
4.026
5.047
6.065
15.8
20.9
26.6
35.0
40.9
52.5
62.7
77.9
90.1
102.3
128.2
154.0
.109
.113
.133
.140
.145
.154
.203
.216
.226
.237
.258
.280
2.8
2.9
3.4
3.6
3.7
3.9
5.2
5.5
5.7
6.0
6.5
7.1
127
INTERNATIONAL
EMT ELECTRICAL METALLIC TUBING
Outside Dia.
Inside Dia.
Wall Thickness
Inches
mm
Inches
mm
Inches
mm
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Size
CANADA
Description
USA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Bending information on stub-ups, offsets, saddles and concentric bends.
• Pocket size 3-1/2" x 6-3/4".
• Bending charts for Greenlee Benders.
• Easy to use for fast, accurate bending calculations.
MADE FOR THE TRADE!™
PVC
PVC Heater Selection Guide
849 PVC Heater
Bending
847/ 848
PVC Heater with optional Roller Support
and PVC Plug
851 PVC Heater
PVC HEATING
Cat. No. – Description
Page No.
860-1-1/2 PVC Heating Blanket 128
860-3 PVC Heating Blanket
128
860-4 PVC Heating Blanket
128
849 PVC Heater
129
851 PVC Heater
129
847 / 848 PVC Heater
129
1/2"
✓
✓
✓
✓
3/4"
✓
✓
✓
✓
1"
✓
✓
✓
✓
1-1/4"
✓
✓
✓
✓
1-1/2"
✓
✓
✓
✓
2"
2-1/2"
3"
3-1/2"
4"
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
5"
6"
✓
✓
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
PVC Heating Blankets for up to 4", All Schedules
• Make bends, offsets or saddles in PVC fast and easy.
• Easy to use: wrap blanket around PVC, secure with hook and loop strap.
Built-in stiffeners help keep the blanket tight to the PVC surface.
Remove blanket and form bend by hand.
• Controlled, even heating for uniform bending.
• Heavy-duty cord and thermostat for long life.
• Temperature over 300° F (149° C).
Cat. No.
UPC No.
Description
860-1-1/2
860-3
860-4
31486
31487
31488
PVC Heating Blanket for up to 1-1/2"
PVC Heating Blanket for 2"-3"
PVC Heating Blanket for 3-1/2" and 4"
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
Tel: 800.435.0786
Fax: 800.524.2853
Specifications
128
860-1-1/2
860-3
860-4
Capacity
Up to 1-1/2" PVC
All Schedules
2" - 3" PVC
All Schedules
3-1/2" - 4" PVC
All Schedules
Power Source
120 VAC
120 VAC
120 VAC
Size
13" x 8-1/4"
(330.2 x 209.6 mm)
30" x 13-1/4"
(762.0 x 336.6 mm)
38" x 16-1/4"
(965.2 x 412.8 mm)
Weight
1.7 lbs. (.8 kg)
3.3 lbs. (1.5 kg)
4.9 lbs. (2.2 kg)
Wattage
200
800
1300
www.greenlee.com
Electric PVC Heater for 1/2" - 2", All Schedules
• Easy to use: preheat for 10 minutes, insert PVC, rotate until pliable,
r emove and form bend.
• Sturdy double wall metal with fiberglass insulation and reflective
interior for fast, even heat.
• Full length door for easy PVC loading and removal.
• Other features include on/off switch, pilot light and carrying handle.
• Heats 24" Long section of pipe.
UPC No. Description
849
27811
27395
27811
Electric PVC Heater for 1/2" - 2"
Calrod Heating Element
SPECIFICATIONS
Capacity
Power Source
Weight
1/2" - 2" PVC All Schedules
120 VAC 20 Amp or 3000 Watt Generator
15 lbs. (6.8 kg)
Electric PVC Heater for 1/2" - 4", All Schedules
Bending
120 VAC
20 AMP
Cat. No.
• Easy to use: preheat for 10 minutes, open lid and position PVC, close lid,
rotate until pliable, open lid, remove PVC and form bend.
• Heavy-duty, insulated metal walls and cover with reflective interior
for efficient, even heat.
• Full-length door for easy loading and unloading.
• On/off switch with indicator light.
• Sturdy wheels for easy mobility.
• Use two units in tandem to heat large sweep bends.
• Heats 50" Long section of pipe.
120 VAC
20 AMP
Cat. No.
UPC No.
Description
851
35592
35577
35592
Electric PVC Heater for 1/2" - 4"
Calrod Heating Element
1/2" -4" PVC All Schedules
120 VAC 20 Amp or 3600 Watt Generator
52" (1321 mm)
53 lbs. (24 kg)
2300
See below for 2" - 4" PVC plugs or 859-4 Plug Set.
Capacity
Power Source
Length
Weight
Wattage
= new product
1/2" - 6" PVC All Schedules
230 VAC 30 AMP or 7000 Watt Generator
71" (1803 mm)
847 − 78 lbs. (36 kg) 848 − 80 lbs. (37 kg)
6600
= Replacement Part
= Accessory
Cat. No.
UPC No.
Description
847
848
30866
30867
31092
857
30908
31092
31093
30908
Electric PVC Heater for 1/2"-6" All Schedules
Electric PVC Heater with Motorized PVC Rotation for 1/2"-6" All
Schedules
Motorized PVC rotation kit for 847
PVC Roller Support (Optional)
Calrod Heating Element
129
INTERNATIONAL
SPECIFICATIONS
Tel: +1.815.397.7070
Fax: +1.815.397.9247
230 VAC
30 AMP
Tel: 800.435.0786
Fax: 800.524.2853
• Easy to use: preheat for 10 minutes, open lid and position PVC, close lid,
rotate until pliable, open lid, remove PVC and form bend. 848 model has
motorized rotation.
• Heavy-duty metal construction with reflective interior for fast,
efficient heating.
• Has heating chart, timer, and on/off switch with indicator light for
added convenience.
• Double doors with piano hinges allow heating shorter lengths with
one door open.
• Sturdy wheels for easy mobility.
• Heats 65" Long section of pipe.
CANADA
Electric PVC Heater for 1/2" - 6", All Schedules
USA
Capacity
Power Source
Length
Weight
Wattage
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
MADE FOR THE TRADE!™
PVC ACCESSORIES
PVC Plugs and Plug Set
Bending
• Use with PVC Heating Blankets or Electric Heaters to plug the ends
of the PVC being heated. The trapped air will help keep the PVC from
collapsing while forming the bend.
• Use on Schedule 40 and 80 PVC.
• Available in 2"- 4" set or individual sizes 2"- 6". Order two,
one for each end of the PVC.
Cat. No.
UPC No.
Description
859-4
35740
30976
30977
30978
30979
30980
30981
31228
30976
30977
30978
30979
30980
30981
31228
PVC Plug Set for 2" - 4". Includes 2 each of 2", 2-1/2", 3"
and 4" plugs and carrying case. Case has a place for optional
5" and 6" sizes.
2" PVC Plug
2-1/2" PVC Plug
3" and 3-1/2" PVC Plug
4" PVC Plug
5" PVC Plug
6" PVC Plug
Plastic Carrying Case
SPECIFICATIONS
Capacity
Weight
2" - 6" PVC Schedules 40 and 80
859-4 − 8 lbs. (3.6 kg)
30976 − .3 lbs. (0.2kg)
30977 − .4 lbs. (0.2 kg)
30978 − .4 lbs. (0.2 kg)
30979 − .6 lbs. (3.6 kg)
30980 − 1lbs. (0.5 kg)
30981− 1.3 lbs. (0.6 kg)
PVC Cutter
862
• Cuts 3/4” schedule 40 PVC
• Cuts 1/8” - 1-3/8” (3-35mm) O.D. flexible plastic pipe
• Diecast aluminum alloy body for added strength and blade guide
for square cuts.
• Reversible blade for twice the life.
• Handle latch for safety.
Cat. No.
UPC No.
Description
862
89806
Plastic Pipe Cutter
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
130
PVC Cutter for up to 1-1/4"
Capacity
Weight
Up through 1-3/8" O.D. Flexible Plastic Pipe
0.36 lbs. (0.16 kg)
• Ratchet action for fast, easy cutting.
• Heat-treated, replaceable steel blade for long cutting life.
• Rugged metal alloy frame for durability.
Cat. No.
UPC No.
Description
864
00355
04253
00355
PVC Cutter for up to 1-1/4"
Blade Kit
SPECIFICATIONS
PVC Cutter for up to 2"
Capacity
Weight
Up thru 1-1/4" PVC
0.8 lbs. (0.4 kg)
• High-leverage compound ratchet action and long handles reduce effort.
• Heavy-duty metal frame for cutting large diameters.
• Sharpenable and replaceable tool steel blade.
Cat. No.
UPC No.
Description
865
07978
09865
07978
PVC Cutter for up to 2"
Blade
SPECIFICATIONS
Capacity
Weight
Up thru 2" PVC
2.5 lbs. (1.1 kg)
Fishing
Greenlee has the most innovative fishing systems
designed to perform on the jobsite. Whether you're
going a few short feet or through many walls and
bends, having Greenlee's fishing products
on the jobsite will make the job easier for
any commercial, industrial or utility
application.
Contents
Fish Tapes
Fish Stix®
Glow Stix®
Reachers
CableCaster®
Flashlights
Vacuum/Blower Systems
Measuring Tapes
132
136
136
137
138
138
139
144
MADE FOR THE TRADE!™
MADE FOR THE TRADE!™
FISH TAPES
MagnumPRO™ Oil-Tempered Spring Steel Fish Tapes
Fishing
• Oil-tempered spring steel for excellent fishing performance.
• Dirt-free tape finish keeps hands cleaner during use.
• Advanced comfort handle grip reduces fatigue.
• Superior rapid tape pay-out and rewind.
• Smaller Fish Eye with offset bend for improved fishing ability.
• Improved low profile tip for easy fishing through all sizes of conduit.
• Viewing Port gives visibility to remaining tape and ability to remove
jobsite debris quickly.
• Rugged case design improves drop impact capability.
• Flared case with Grip Ridges for no slip handling.
• Available in 50' (15.2 m), 65' (19.8 m), 125' (38.1 m) and
240' (73.2 m) lengths.
• 1/8", 1/4" and flat steel profiles to accommodate different
fishing situations.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Description
07500
12729
10028
12709
10046
12730
10048
12710
12476
12469
12470
12471
12472
29367
05853
30859
14392
10051
10052
Steel Fish Tape - 50' × 1/8" (15.2 m × 3.2 mm)
Steel Fish Tape - 65' × 1/8" (19.8 m × 3.2 mm)
Steel Fish Tape - 65' × 1/8" (19.8 m × 3.2 mm) 3-PACK
Steel Fish Tape - 125' × 1/8" (38.1 m × 3.2 mm)
Steel Fish Tape - 125' × 1/8" (38.1 m × 3.2 mm) 3-PACK
Steel Fish Tape - 240' × 1/8" (73.2 m × 3.2 mm)
Steel Fish Tape - 240' × 1/8" (73.2 m × 3.2 mm) 3-PACK
Steel Fish Tape - 100' × 1/4" (30.5 m × 6.4 mm)
Steel Fish Tape - 200' × 1/4" (61 m × 6.4 mm)
Replacement Steel Tape - 65' (NO CASE)
Replacement Steel Tape - 125' (NO CASE)
Replacement Steel Tape - 240' (NO CASE)
Replacement Steel Tape - 100' × 1/4" (NO CASE)
Swivel Ball Head for use on 1/8" Steel Fish Tapes
Ball Tip Male Half
12" (305 mm) Flexible Fish Tape Leader
12" (305 mm) SPEED FLEX Leader (solder joints)
8 1/2" Case/Handle Replacement Kit
12" Case/Handle Replacement Kit
Capacity
Weight
FTS438-65
438-5H
132
UPC No.
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
FTS438-125
Cat. No.
438-5H
FTS438-65
FTS438-65BP
FTS438-125
FTS438-125BP
FTS438-240
FTS438-240BP
FTS438W-100
S438W-200
RS438-65
RS438-125
RS438-240
RS438W-100
R438B
R438-BM
439-1
439-2
10051
10052
1/8" (3.2 mm) tape width- 400 lbs. (1.7 kN) maximum design strength
1/4" (6.4 mm) tape width – 400 lbs. (1.7 kN)
maximum design strength.
438-5H - 1/8" (3.2 mm) tape width- 400lbs. (1.7 kN)
maximum design strength.
FTS438-65- 3.1 lbs. (1.4 kg)
S438W-200 – 10.9 lbs. (4.9 kg)
FTS438-125 - 5.5 lbs. (2.5 kg)
438-5H – 2.8 lbs. (1.3 kg
FTS438-240 - 8.5 lbs. (3.9 kg)
438-2X - 1.3 lbs. (.6 kg)
FTS438W-100 – 7.2 lbs. (3.3 kg)
www.greenlee.com
Flat-Steel Fish Tape- 1/4" Wide
• Flat steel tape reaches easily above ceilings, under carpets,
and through walls to install wire.
• 25' (7.6 m) long, extending your reach.
• Winder case with crank handle for easy, compact storage.
Cat. No.
UPC No.
Description
438-2X
01696
25' x 1/4" x 0.030" (7.6 m x 6.4 mm x 0.8 mm) Steel Fish Tape
SPECIFICATIONS
Weight
1.25 lb (0.6 kg)
MagnumPRO™ Stainless Steel Fish Tapes - 1/8" Wide
Cat. No.
UPC No.
Description
FTSS438-100
FTSS438-200
RSS438-100
RSS438-200
439-2
10052
12711
12712
12480
12481
14392
10052
Stainless Steel Fish Tape - 100' × 1/8" (30.5 m × 3.2 mm)
Stainless Steel Fish Tape - 200' × 1/8" (61 m × 3.2 mm)
Replacement Stainless Steel Tape - 100' (NO CASE)
Replacement Stainless Steel Tape - 200' (NO CASE)
12" (305 mm) SPEED FLEX Leader (solder joints)
12" Case/Handle Replacement Kit
Fishing
• Corrosion free stainless steel tape for maximum life.
• Fish further and faster with Speed Flex leader.
• Advanced comfort handle grip reduces fatigue.
• Viewing Port gives visibility to remaining tape and ability to remove
jobsite debris quickly.
• Rugged case design improves drop impact capability.
• Flared case with Grip Ridges for no slip handling.
• Available in 100' (30.5 m) and 200' (61 m) lengths.
• Replacement Speed Flex leader.
SPECIFICATIONS
MagnumPRO™ Flexible Steel Fish Tapes
FTFS439-50
FTFS439-100
FS439-100
12713
12714
12482
10052
10052
Flexible Steel Fish Tape - 50' × 3/16" (15.2 m × 4.8 mm)
Flexible Steel Fish Tape - 50' × 3/16" (30.5 m × 4.8 mm)
Flexible Steel Fish Tape - 50' × 3/16" (15.2 m × 4.8 mm)
Double Tip (NO CASE)
12" Case/Handle Replacement Kit
SPECIFICATIONS
Capacity 3/16" (4.8 mm) tape width – 500 lbs. (2.2 kN) maximum design
strength.
Weight
= new product
= Replacement Part
= Accessory
FTFS439-50 – 5.6 lbs. (2.5 kg);
FTFS439-100 – 8.9 lbs. (4.0 kg);
FS439-100 – 6.2 lbs. (2.8 kg)
133
INTERNATIONAL
Description
CANADA
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Multi-strand steel cable for maximum flexibility.
• Available in 50' (15.2 m) and 100' (30.5 m) lengths.
• Advanced comfort handle grip reduces fatigue.
• Viewing Port gives visibility to remaining tape and ability to remove
jobsite debris quickly.
• Rugged case design improves drop impact capability.
• Flared case with Grip Ridges for no slip handling.
Tel: 800.435.0786
Fax: 800.451.2632
1/8" (3.2 mm) tape width-400 lbs. (1.7 kN) maximum design strength
FTSS438-100 - 4.8 lbs. (2.2 kg);
FTSS438-200 - 7.4 lbs. (3.4 kg)
USA
Capacity
Weight
MADE FOR THE TRADE!™
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Fishing
MagnumPRO™ Fiberglass Fish Tapes
134
• Non-conductive fiberglass tape with patented low-friction coating for faster
and easier fishing.
• Perfect for fishing in conduit with wire or cable present.
• Advanced comfort handle grip reduces fatigue.
• Superior rapid tape pay-out and rewind.
• Smaller Fish Eye with offset bend for improved fishing ability.
• Improved low profile tip for easy fishing through all sizes of conduit.
• Viewing Port gives visibility to remaining tape and ability to remove
jobsite debris quickly.
• Rugged case design improves drop impact capability.
• Flared case with Grip Ridges for no slip handling.
• Available in 50' (15.2 m), 100' (30.5 m) and 250' (76.2 m) lengths.
• Replaceable tips.
• Exclusive, unique, lightweight reel for easy positive feed out and rewind.
• Excellent for installation of telecommunications and data communication
cables in overhead plenums, above suspended ceilings and under floors.
• Fiberglass fish tape is the fastest manual fish tape available. It is intended
for fishing only. Rope or line is recommended for pulling.
Cat. No.
UPC No.
Description
FTF540-50
FTF540-100
542-200
12717
12718
35746
542-250
35747
R540-100
05157
05158
10565
35744
05157
05158
10565
35750
35750
35908
35908
35909
35909
35919
35930
10052
35919
35930
10052
Fiberglass Fish Tape - 50' × 11/64" (15.2 m × 4.3 mm)
Fiberglass Fish Tape - 100' × 11/64" (30.5 m × 4.3 mm)
Fiberglass Fish Tape 200' × 3/16" (61 m × 4.8 mm)
IN REEL STAND
Fiberglass Fish Tape 250' × 3/16" (76.2 m × 4.8 mm)
IN REEL STAND
Replacement Fiberglass Tape - 100' × 11/64" (NO CASE)
Replacement Fiberglass Tape - 200' × 3/16" (NO CASE)
Replacement Fiberglass Tape - 250' × 3/16" (NO CASE)
Pulling Eye Repair Kit for 11/64" (4.3mm) Diameter Fish Tapes
(Includes: pulling eye & adhesive)
Accessory Kit for 3/16" (4.78 mm) Fish Tapes (Includes
flexible pulling leader, flexible pushing leader, pulling eye,
splice ferrule and threaded ferrule)
1/8" (3 mm) Repair Kit (Includes threaded end
ferrule, splice ferrule and pulling eye)
3/16" (4.7 mm) Repair Kit (Includes threaded end
ferrule, splice ferrule and pulling eye)
1/8" (3 mm) Pulling Eye
3/16" (4.7 mm) Pulling Eye
12" Case/Handle Replacement Kit
SPECIFICATIONS
Capacity
Weight
540 Series- 0.175" (4.4 mm) dia. - 300 lbs. (1.3 kN)
maximum design strength
542 Series-3/16" (4.7 mm) dia. - 400 lbs. (1.7 kN)
maximum design strength
FTF540-50 - 2.8 lbs. (1.3 kg)
FTF540-100 - 3.4 lbs. (1.5 kg)
542-200- 16 lbs. (7.2 kg)
542-250- 17 lbs. (7.7 kg)
www.greenlee.com
MagnumPRO™ Nylon Fish Tapes
• Non-conductive, curl resistant nylon tape for fast, clean fishing.
• Good for fishing in conduit with wire or cable present.
• Rugged case design improves drop impact capability.
• Advanced comfort handle grip reduces fatigue.
• Nylon fish tape is intended for fishing only. Rope or line is recommended
for pulling.
UPC No.
Description
FTN536-50
FTN536-100
RN536-50
RN536-100
01664
12715
12716
12483
12484
01664
10052
10052
Nylon Fish Tape 50' × 3/16" (15.2 m × 4.8 mm)
Nylon Fish Tape 100' × 3/16" (30.5 m × 4.8 mm)
Replacement Nylon Fish Tape 50' (NO CASE)
Replacement Nylon Fish Tape 100' NO CASE)
Replacement Tip for 436 Nylong Fish Tape (Requires Greenlee
K05 or K09 series crimper or #6 hex crimp to install.)
12" Case/Handle Replacement Kit
SPECIFICATIONS
Fishing
Cat. No.
Capacity 3/16" (4.8 mm) diameter – 250 lbs. (1.1 kN) maximum design strength
Weight
FTN536-50 – 2.9 lbs. (1.3 kg)
FTN536-100 – 3.6 lbs. (1.6 kg)
Flex-O-Twist® Flexible Fish Tape Leader
• Helps guide 1/8" steel tapes through sharp bends.
• Thread on the end of the fish tape in place of the swivel ball head.
UPC No.
Description
439-1
30859
12" (305 mm) Flexible Fish Tape Leader
Weight
1.3 lbs. (0.6 kg)
= Accessory
Description
439-2
14392
12" (305 mm) SPEED FLEX Leader (solder joint)
SPECIFICATIONS
Weight
1.3 lbs. (0.6 kg)
135
INTERNATIONAL
= Replacement Part
UPC No.
CANADA
= new product
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Silver-solder joint attaches to any 1/8" (3.2 mm) x .060"
(1.5 mm) steel fish tape to provide a slim profile that
fishes farther, faster.
• High-strength stainless steel cable is used for reliability
and long life.
• Beveled edges on the leader reduce the possibility
of hangups when pulling wire.
• Up to (6) #10 wires can be attached to the large pulling eye.
Tel: 800.435.0786
Fax: 800.524.2853
SpeedFlex® Flexible Fish Tape Leader
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
USA
Cat. No.
MADE FOR THE TRADE!™
Fishing
Fish Stix®
• Highly visible green color rods can be easily threaded together
and seen when working above ceilings, down walls, or
under raised floors.
• 1/4" (6.4 mm) diameter fiberglass adds rigidity when
connecting multiple sections.
• 200 lbs. (0.9 kN) maximum pulling strength.
• Two different threaded tips accommodate various
bundles of wire or cable.
• 540-24 includes one 3' (0.9 mm) Glo Stix™ section for
improved tip visibility.
• Optional Whisk Nose Tip is available for fishing over obstacles,
and can be used to guide extended Glo Stix sideways above
ceilings by rotating. Can also be used to fish longer lengths by
providing a tip that can be snagged from the opposite direction
with another extended Fish or Glo Stix with a hook nose tip.
Glo Stix®
• Luminescent fiberglass rods glow in the dark to make fishing
voice, data and video wires easier in dark spaces, such as
above ceilings, in walls, and below sub-floors.
• More flexible for fishing in walls through outlet box holes.
• Sturdy, steel-threaded connectors are interchangeable with
Greenlee 1/4" (6.4 mm) Fish Stix.
• Clear, non-metalic storage tube keeps Glo Stix charged and
ready to use.
• 200 lbs. (0.9 kN) maximum pulling strength.
• Optional Whisk Nose Tip is available for fishing over obstacles,
and can be used to guide extended Glo Stix sideways above
ceilings by rotating. Can also be used to fish longer lengths by
providing a tip that can be snagged from the opposite direction
with another extended Fish or Glo Stix with a hook nose tip.
Cat. No.
UPC No.
Description
540-12
10504
540-24
10506
540-8M
540-15
12918
11422
540-6
86795
540-18
86796
540-20P
12919
10497
10498
11426
11583
11584
12920
11585
11427
12922
89803
10497
10498
11426
11583
11584
12920
11585
11427
12922
89803
Fish Stix Kit: 1/4" x 12' (6.4 mm x 3.6 m) with bullet &
“J” hook nose tips
Fish Stix Kit: 1/4" x 24' (6.4 mm x 7.3 m) with bullet &
“J” hook nose tips
Glo Stix Kit: 3/16" x 8' long with bullet & “J” hook nose tips
Glo Stix Kit: 3/16" x 15' (4.7 mm x 4.6 m) with bullet &
“J” hook nose tips
Glo Stix, single 5/32" x 6' (4.0 mm x 1.8 m) with fixed bullet
nose on both ends
Glo Stix Kit: 5/32" x 18' (4.0 mm x 5.5 m) with bullet &
“J” hook nose tips
Professional Installers Kit: (3)-1/4" x 4' Fish Stix sections,
(2)-3/16" x 2' Glo Stix Sections & (1)-5/32" x 4'
Glo Stix Section, (1) whisk, (1) “J” hook, (1) bullet nose
Hook Nose Tip
Bullet Nose Tip
Whisk Nose Tip
1/4" x 4' (6.4 mm x 1.2 m) Fish Stix Section
1/4" x 6' (6.4 mm x 1.8 m) Fish Stix Section
3/16" x 20" (4.7 mm x .5 m) Glo Stix Section
3/16" x 3' (4.7 mm x 0.9 m) Glo Stix Section
3/16" x 5' (4.7 mm x 1.5 m) Glo Stix Section
5/32" x 4' (4.7 mm x 1.2 m) Glo Stix Section
5/32" x 6' (4.0 mm x 1.8 m) Glo Stix Section
Whisk
Tel: +1.815.397.7070
Fax: +1.815.397.9247
INTERNATIONAL
540-6
540-18
“J” Hook
Bull Nose
540-15
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
Tel: 800.435.0786
Fax: 800.524.2853
540-12
& 540-24
136
SPECIFICATIONS
Overall
Length
Sections
Section
Length
Diameter
Weight
Material
Minimum
Bend Radius
FISH STIX®
GLOW STIX®
540-12
540-24
540-8M
540-15
540-6
540-18
540-20P
12' (3.6 m)
24' (7.3 m)
8' (2.4 m)
15' (4.6 m)
6' (1.8 m)
18' (5.5 m)
6' (1.8 m)
3
5
3
1
3
6
20" (.5 m)
5' (1.5 m)
6' (1.8 m)
6' (1.8 m)
†
1/4" (6.4 mm)
1.04 lbs. (0.5 kg)
Fish Stix
5
(3) 6' (1.8 m), (1) 3'
(0.9 m) & (1) 3' (0.9
m) Glo Stix Section
1/4" (6.4 mm)
1.94 lbs. (0.9 kg)
Fish Stix
3/16" (4.8 mm)
.8 lbs. (0.4 kg)
Glo Stix
3/16" (4.7 mm)
1 lbs. (0.5 kg)
Glo Stix
5/32" (4.0 mm)
.4 lbs. (0.2 kg)
Glo Stix
5/32" (4.0 mm)
.8 lbs. (0.4 kg)
Glo Stix
5/32" (4.0 mm)
.4 lbs. (0.2 kg)
Glo Stix
6 1/2" (165 mm)
6 1/2" (165 mm)
4 1/4" (108 mm)
4 1/4" (108 mm)
3 1/2" (89 mm)
3 1/2" (89 mm)
3 1/2" (89 mm)
4' (1.2 m)
†540-20P includes: (3)-1/4" x 4' Fish Stix sections, (2)-3/16" x 2' Glo Stix Sections & (1)-5/32" x 4' Glo Stix Section.
www.greenlee.com
3' Wire Reacher
• Extends your reach above ceilings and walls.
• Stainless-steel construction for long life.
• Hook can be used to install cables and wires up to 3⁄4" (19 mm) diameter.
• Clip included for easy storage in shirt pocket.
• Self-contained, no loose parts.
Cat. No.
UPC No.
Description
FP3
23902
3' Wire Reacher
SPECIFICATIONS
38" (965 mm)
6-3/8" (162 mm)
3/8" (9.5 mm)
1.6 oz (46 g)
Fishing
Extended length:
Collapsed length:
Diameter:
Weight:
Fish Poles
FP12
FP18
FP24
10453
02268
10442
10443
10453
Fish Pole 12 ft.
Fish Pole 18 ft.
Fish Pole 24 ft.
Replacement Hook
SPECIFICATIONS
= Replacement Part
= Accessory
FP24 FISH POLE
24' (7.31 m)
50" (1270 mm)
2 1/4" (57 mm)
4 1/4 lb. (1.9 kg)
137
INTERNATIONAL
= new product
FP18 FISH POLE
18' (5.48 m)
27" (686 mm)
2" (50 mm)
2 1/2 lb. (1.1 kg)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
FP12 FISH POLE
Extended length:
12' (3.7 m)
Collapsed length: 26" (660 mm)
Diameter: 1 1/4" (32 mm)
Weight: 1.3 lb. (0.6 kg)
CANADA
Description
USA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
Designed specifically for pushing and pulling wires over long distances.
• Push or pull wires over suspended ceilings, under sub-floors or crawl
spaces and in attics.
• Non-conductive, high-impact construction.
• Velcro strap secures pole when in collapsed position.
• Self-contained, no loose parts.
• Lightweight design to minimize fatigue.
• FP12 - Fish Pole 12' collapses to 26" x 1 1/4" and uses friction-locking
system.
• FP18 - Fish Pole 18' collapses to 27" x 2" and uses friction-locking
system.
• FP24 - Fish Pole 24' collapses to 50" x 2 1/4" and uses snap-lock buttons
to maintain extended reach capabilities.
• Install suspension wires for drop ceilings.
• U.S. Patents #6,729,358 & #6,908,250
MADE FOR THE TRADE!™
CableCaster®
Fishing
Significantly speeds up the installation of lightweight communications cable
through hard-to-reach spaces such as suspended ceilings, rafters
and sub-floors.
• 50' (15 m) range allows for faster installations with fewer pulls.
• Bright yellow body reduces chances of leaving the CableCaster behind.
• Glow-in-the-dark darts minimize replacement costs because they
are easy to locate.
• Aerodynamic darts provide high accuracy and fast installation.
• Optional flashlight improves visibility.
Cat. No.
UPC No.
Description
06186
06186
CableCaster Wire Pulling Tool with Three Darts
06259
06259
CableCaster Replacement Darts (Pack of Four)
46500
46500
Pocket-Light Flashlight
Pocket-Light Flashlight
UPC No.
Description
46500
46500
Pocket-Light Flashlight
46533
46533
Lamp Module
46534
46534
O-Ring
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Mini Pocket-Light Flashlight
Cat. No.
UPC No.
Description
46503
46503
Mini Pocket-Light Flashlight
46533
46533
Lamp Module
46534
46534
O-Ring
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
• High intensity Xenon fired lamp. .
• Luminous tip so flashlight can be
located in the dark.
• Lifetime limited warranty.
• Submersible to 500 feet.
• Dust and rust proof
• (2) AAA Batteries included.
138
• High intensity Xenon fired lamp.
• Submersible to 500 feet.
• (2) AAA Batteries included.
• Compact pocket and key chain light.
• Includes key ring and handy hat/clothing clip.
• Dust and rust proof.
www.greenlee.com
690 Vacuum/Blower Power Fishing System
• Rugged, self-contained unit includes everything you need to blow or
vacuum fish line, poly line or measuring tape.
• Durable tank and accessory storage box are corrosion, chemical and
impact-resistant polyethylene.
• Designed for the jobsite, 10' (3.05 m) long hose, large heavy-duty wheels
and removable accessory box.
• Large 11 gallon (41.6 l) tank makes the 690 excellent for vacuuming
water and debris.
NRTL/C
H
UPC No.
Description
690
618
619
16646
31339
16517
16951
16646
Vacuum/Blower Power Fishing System - 120 VAC
Piston for 5" Conduit
Piston for 6" Conduit
Accessory - Adapter for 5" - 6" conduit
key
Cat. No.
*
C
D
E
F
G
H
I
J
25644
25646
25645
34027
23360
32116
34392
38624
25644
25646
25645
34027
23360
32116
34392
38624
K
K
K
31315
31314
37917-10
37918-5
37920-5
31315
31314
06274
06275
06277
A
F
G
K
K
37921-5
37923-5
06278
06280
Fish Line – 85 lbs. (378 N) pulling
strength; 2,150' (655 m) long
Piston set for 1/2"-4" conduit (EMT &
Rigid) see page 142 for replacements
Adapter Cone 1-1/4"-2-1/2" Conduit
Adapter Cone 1/2"-1" Conduit
Adapter Cone 3"-4" Conduit
Storage Box
Adapter Nozzle for tape and line
Blower and Vacuum Unit
Tank with casters
Flexible Hose 1-1/2" x 10'
(38.1mm x 3.05 m)
Outer Filter Bag
Inner Filter Bag
1/2" Conduit x 150' (46 m) Line Pkg.
3/4" Conduit x 200' (61 m) Line Pkg.
3/4" Conduit x 450' (137 m) Line
Pkg.
1" Conduit x 200' (61 m) Line Pkg.
1" Conduit x 450' (137 m) Line Pkg.
D
SPECIFICATIONS
Capacity
= Replacement Part
= Accessory
5
5
139
INTERNATIONAL
= new product
1
1
10
5
5
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Power Source
Weight
Air Flow
Pressure
1/2" - 4" Conduit (5" and 6" with optional foampistons)
see page 142
120 VAC
50 lbs. (22.7 kg)
120 cfm
Will lift 110" (2794 mm) of water
1
1
1
1
1
1
1
1
Tel: 800.435.0786
Fax: 800.524.2853
J
1
CANADA
B
I
32433
USA
595
690/
31339
Tel: 800.435.0786
Fax: 800.451.2632
A
K
E
UPC No. Description
Fishing
B
Cat. No.
MADE FOR THE TRADE!™
Li'l Fisher® 390 Power Fishing System
Cat. No.
UPC. No.
Description
390
38594
392
39051
Li'l Fisher Vacuum/Blower Power Fishing System - Includes only
unit and 38624 hose
Power Fishing System Accessory Kit- Includes all items below
Fishing
392 / 39051 Accessory Kit includes:
390
392
Key Cat. no.
UPC No.
A
595
32433 Fish Line – 85 lbs. (378 N) pulling
strength; 2,150' (655 m) long
Description
QTY.
B
*
Piston for 1/2" Conduit
1
B
*
Piston for 3/4" Conduit
1
B
*
Piston for 1" Conduit
1
B
*
Piston for 1-1/4" Conduit
1
B
*
Piston for 1-1/2" Conduit
1
B
613
16511
Piston for 2" Conduit
1
C
23360
23360
Adapter Nozzle for Measuring Tape
1
D
37917-10
06274
1/2" Conduit x 150' (46 m) Line Pkg.
10
E
37918-5
06275
3/4" Conduit x 200" (91 m) Line Pkg.
5
F
37920-5
06277
3/4" Conduit x 450' (137 m) Line Pkg.
5
G
37921-5
06278
1" Conduit x 200' (61 m) Line Pkg.
5
H
37923-5
06280
1" Conduit x 450' (137 m) Line Pkg.
5
1
J
39063
39063
Accessory Container Lid
1
K
54284
54284
Accessory Container
1
L
25646
25646
1/2"-1" Cone adapter
1
M
25644
25644
1-1/4"-2-1/2" Cone adapter
1
*See page 142 for replacement conduit pistons.
SPECIFICATIONS
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Capacity
140
Power Source
Weight
Air Flow
Vacuum Lift
Blowing a
piston through
conduit using
390 Li’l Fisher™
Power Fishing
System. Can be
used with fish
line, poly line or
measuring tape.
1/2"-2" conduit with optional Accessory Kit (2-1/2"-4" with optional
foam pistons) Liquid Capacity- 1.75 gal. (6.5 l) Use 690 Power
Fishing System for greater liquid capacity requirements
120 VAC, 1/2 H.P.
390-19 lbs. (8.6 kg)
101.2 cfm (2.83 cMm)
137.1" (3482 mm) of Water
Blowing a piston
through conduit
using 390 Li’l
Fisher™ Power
Fishing System
using 691 Blow Gun
with 595 Mighty
Mouser ® Fish Line.
Vacuuming a
piston through
conduit using 390
Li’l Fisher™ Power
Fishing System.
Can be used with
fish line, poly line or
measuring tape.
www.greenlee.com
Portable Blower Power Fishing System
• Powerful, will blow line or measuring tape in up to 6" conduit.
• Portable, lightweight blower has shoulder strap to make it easy to carry
and allow the operator to have both hands free.
• Efficient, includes the Mighty Mouser® blow gun for fast, easy line
blowing.
Cat. No.
UPC No.
Description
591
618
619
16646
32432
16517
16951
16646
Portable Blower Power Fishing System
Piston for 5" Conduit
Piston for 6" Conduit
Adapter for 5" - 6" conduit
Capacity
Power Source
Weight
1/2" - 4" Conduit (5" and 6" with optional foam pistons)
120 VAC 20 Amp
34 lbs. (15.2 kg)
Fishing
SPECIFICATIONS
*See next page for parts list.
Mighty Mouser® Blow Gun Kit
• This compact, self-contained Lexan® thermoplastic blow gun holds
a 2,150' (655 m) package of 85 lb. (378 N) breaking strength fish line.
• Compact self-contained unit leaves one hand free for
more efficient operation.
• Mighty Mouser® Blow Gun and Accessories all fit into a compact
sturdy metal case.
Description
592
32565
691
595
32095
32433
618
619
16646
16517
16951
16646
Mighty Mouser® Blow Gun Kit for 1/2" - 4" Conduit
in metal box
Mighty Mouser Blow Gun (only)
Fish Line - 85 lbs. (378 N) pulling strength; 2,150'
(655 m) long
Piston for 5" Conduit
Piston for 6" Conduit
Adapter for 5" - 6" conduit
1/2"- 4" conduit, through 6" with additional optional accessories
Use with blower power fishing systems
592-20 lbs. (9 kg) 691-1.7 lbs.(0.8 kg)
*See next page for parts list.
Tel: 800.435.0786
Fax: 800.524.2853
Capacity
Power Source
Weight
= Replacement Part
= Accessory
141
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
SPECIFICATIONS
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
MADE FOR THE TRADE!™
Parts List for Models 591 and 592
key
J
C
B
F
Cat. No.
UPC No. Description
A
B
691
595
32095
32433
C
*
D
E
F
G
25644
25646
25645
32104
25644
25646
25645
32104
H
J
K
L
M
33451
32662
23360
590
32431
33451
32662
23360
32422
32431
N
37917-10
06274
N
37918-5
06275
N
37920-5
06277
N
N
37921-5
37923-5
06278
06280
E
N
G, H
D
A
Fishing
592 Mighty Mouser ® Blow Gun Kit
J
L
F
A
D
G, H
E
M
K
B
C
N
591 Portable Blower Power Fishing System
Mighty Mouser Blow Gun
Fish Line – 85 lbs. (378N) pulling
strength; 2,150' (655 m) long
Piston set for 1/2"-4" conduit
(EMT & Rigid)
Adapter Cone 1-1/4"-2-1/2" Conduit
Adapter Cone 1/2"-1" Conduit
Adapter Cone 3"-4" Conduit
Flexible Hose 1-1/2" dia. x 1'
(38.1 mm x 305 mm)
Hose Clamp
Storage Box
Adapter Nozzle for Tape and Line
Portable Blower
Flexible Hose 1-1/2" x 4'
(38.1 mm x 1.2 m)
1/2" Conduit x 150' (46 m)
Line Pkg.
3/4" Conduit x 200' (61 m)
Line Pkg.
3/4" Conduit x 450' (137 m)
Line Pkg.
1" Conduit x 200' (61 m) Line Pkg.
1" Conduit x 450' (137 m) Line Pkg.
®
592
591
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
10
5
5
5
5
5
5
5
5
*See below
• Use with blower or vacuum power fishing system to pioneer
the line through the conduit run.
• Flexible foam body for an air-tight seal.
• Color-coded end disk with embossed size markings for fast,
easy selection.
• Strong steel center rod with loops on both ends.
• Pistons available for all types and sizes of conduit 1/2" through 6".
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Conduit Pistons
142
INDIVIDUAL PISTONS
PISTON SETS
Cat.
No.
S2613
34317
UPC
No.
Conduit Sizes and Type
26777 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2" EMT,
IMC and Rigid
34317
2-1/2", 3", 3-1/2" and 4" EMT
Cat.
No.
608-5
608
609-5
609
610-5
610
611-3
611
612-2
612
613
614
621
615
622
616
646
617
623
618
619
UPC
No.
Package
08263
POP
11038
Bulk
08264
POP
11039
Bulk
08265
POP
11040
Bulk
08266
POP
11041
Bulk
08267
POP
11042
Bulk
16511
16512
19107
16513
19109
16514
24326
16515
19110
16517
16951
Conduit
Size
1/2"
1/2"
3/4"
3/4"
1"
1"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
2"
2-1/2"
2-1/2"
3"
3"
3-1/2"
3-1/2"
4"
4"
5"
6"
Conduit
Type
All
All
All
All
All
All
All
All
All
All
All
IMC, Rigid
EMT
IMC, Rigid
EMT
IMC, Rigid
EMT
IMC, Rigid
EMT
All
All
Color
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Green
Yellow
Green
Yellow
Green
Yellow
Green
Yellow
Green
Green
www.greenlee.com
Fish Line
• Strong, lightweight nylon.
• 595 – Center feed for fast payout without tangling.
Use with Mighty Mouser® blow gun.
• 604, 605, 606 and 607 – Specially wound to payout fast from
outside without tangles.
• Mildew-resistant, can be pulled into the run with the wire
to provide a means to add wires later.
• Combination piston and string all in one.
• Blow or vacuum through, leaving a lightweight line
strong enough to pull a rope.
• 17 lb. breaking strength.
UPC
Strength
No. lbs.
N
595
604
605
606
607
32433
23368
16504
16505
16506
85
85
45
72
90
Length
378
378
200
320
400
m
2150
2200
2750
1700
1350
655
670
838
517
411
BOXED
BAGGED
Conduit Length
CAT.
UPC Per
Size ft. m Color
No.
No. Box
1/2"
3/4"
3/4"
1"
1"
Ft
150
300
450
300
450
46
91
137
91
137
Red
Yellow
Yellow
White
White
—
37909-25
37910-25
37912-25
37913-25
—
06265
06266
06268
06269
—
25
25
25
25
Fishing
Line Packages
Cat.
No.
Qty. Qty.
CAT.
UPC Per
No.
No. Bag
37917-10
37919-5
37920-5
37922-5
37923-5
06274 10
06276 5
06277 5
06279 5
06280 5
Poly Line
Poly Line 6500' (1981 m), Green Tracer
Poly Line 500' (152 m), Green Tracer
Poly Line 5200' (1585 m), Yellow Tracer
Poly Line 2200' (670 m), Red Tracer
SPECIFICATIONS
Capacity
= new product
= Replacement Part
= Accessory
143
INTERNATIONAL
430-500 Poly Line
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Weight
430 and 430-500 - 210 lbs. (934 N) average breaking strength
431 - 240 lbs. (1 kN) average breaking strength
37959 - 500 lbs. (2.2 kN) average breaking strength
430 - 11 lbs. (5 kg)
430-500 - 1 lb. (0.5 kg)
431 - 12 lbs. (5.4 kg)
37959 - 12 lbs. (5.4 kg)
CANADA
Description
21481
12598
21482
37959
USA
UPC No.
430
430-500
431
37959
Tel: 800.435.0786
Fax: 800.524.2853
430
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Ready-to-use, pre-punched hole in lid with resealable cap.
• Use with power fishing systems directly from the container.
• Resists tangling when dispensing.
• Rot and mildew resistant.
• Handy reusable plastic dispenser pail with handle keeps the line dry.
• Use to pull rope through conduit.
MADE FOR THE TRADE!™
MEASURING TAPES
High-Strength Polyaramid Measuring/Pulling Tapes
Fishing
• Pull small cables or install pull rope for large cable pulling jobs.
• Made of Polyaramid (equivalent to Kevlar®*), will not rot or deteriorate.
Can be left in ducts indefinitely for future use.
• Low stretch properties make measurements accurate.
• Printed measurements every foot from zero to 3000' (914 m).
• Use 406 Dispenser (see page 165).
Cat. No.
UPC No.
Description
39243
39244
39245
39243
39244
39245
Conduit Measuring Tape 1/4" × 3000' (6.4 mm × 914 m)
Conduit Measuring Tape 3/8" × 3000' (9.5 mm × 914 m)
Conduit Measuring Tape 1/2" × 3000' (12.7 mm × 914 m)
specifications
Cat. No.
39243
39244
39245
Average Breaking Strength
1250 lbs. (5.56 kN)
1800 lbs. (8.01 kN)
2500 lbs. (11.12 kN)
Length
3000' (914 m)
3000' (914 m)
3000' (914 m)
Weight
10.5 lbs. (4.8 kg)
14.5 lbs. (6.6 kg)
18 lbs. (8.2 kg)
* Kevlar is a registered trademark of E. I. DuPont, Inc.
High-Strength Polyester Measuring/Pulling Tapes
• Durable and stretch-resistant tape for easily pulling and installing wire
and fiber optic cables within PVC and HDPE ducts.
• Factory-lubricated to reduce burn-through in innerduct.
• Easy-to-read footage markings for quick and accurate measurements.
• Available in various tensile strengths for use in any application.
Cat. No. UPC No. Description
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
4435
4436
4437
144
10445
10446
10447
Polyester Measure/Pulling Tape 1/2" x 3,000' (12.7 mm x 914m)
Polyester Measure/Pulling Tape 5/8" x 3,000' (15.9 mm x 914m)
Polyester Measure/Pulling Tape 3/4" x 3,000' (19.1 mm x 914m)
specifications
Cat. No.
4435
4436
4437
Average Breaking Strength
1250 lbs. (5.56 kN)
1800 lbs. (8.01 kN)
2500 lbs. (11.12 kN)
Length
3000' (914 m)
3000' (914 m)
3000' (914 m)
Weight
23.6 lbs. (10.7 kg)
31.2 lbs. (14.2 kg)
39.4 lbs. (17.9 kg)
Polyester Measuring Tape and Dispenser
435 Measuring Tape shown on
434 Dispenser – sold separately.
• Fish and measure conduit runs in one operation.
• Permanently printed measurements every foot from zero to 3000' (914 m).
• Made of strong, waterproof polyester.
• Pay-out dispenser has anti-skid pads, handle and built-in cutter.
Cat. No.
UPC No.
Description
435
434
21562
21875
Conduit Measuring Tape 3/16" × 3000' (4.8 mm × 914 m)
Pay-Out Dispenser for 435 Conduit Measuring Tape
SPECIFICATIONS
Size
Capacity
Weight
3000' (914 m)
170 lbs. (756 kN) average breaking strength
435: 4.4 lbs. (2.0 kg), 434: 3.5 lbs. (1.6 kg)
Cable Pulling
Greenlee offers high-quality and durable cable pulling
equipment designed to get the job done. From simple,
straight shots to pulls with multiple bends and
offsets, having Greenlee's cable pullers on the
jobsite is a sure way to make your job faster,
safer and easier in any application.
Contents
Cable Feeders
Lubrication Systems
Cable Tuggers
Tugger Accessories
Sheaves
Cable Tray Accessories
Rope
Lubricants
Swabs, Brushes, Mandrels & Swivels
Grips
146
147
148
158
160
164
166
167
169
172
MADE FOR THE TRADE!™
® Registered: The color green for manual and power-operated cable pullers is a registered trademark of Greenlee Textron Inc.
MADE FOR THE TRADE!™
ULTRA FEEDER
Cable Pulling
Ultra Cable Feeder™
• Feeds cable at variable speeds to match the speed
of cable puller.
• Accommodates cable ranging in size up to 3.5"
(88.9 mm) in diameter.
• Now with new tires for improved traction with low
friction cables.
• Sets up easily and can be operated by just one person.
• Dual motors drive each wheel for traction on both sides
of the cable.
• Comes with pendant and toggle switch. An optional foot
switch is available to control feeding.
• Two cable loading methods: top-loading and end-loading.
• Patented.
Cat. No.
UPC No.
Description
6810
6810-22
445
05645
05564
12293
24821
05645
Ultra Cable Feeder with Hand Switch 120V
Ultra Cable Feeder with Hand Switch 220V
Foot Switch
Tee (included)
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
146
Power Supply
115 VAC, 15 amps, 60 Hz
230 VAC, 8 amps, 50/0 Hz
Speed
4-36 feet per minute
(1.2-11 meters per minute)
Maximum Tractive Force Single Cable: 200 lbs. (.9 kN)
All Cables: 800 lbs. (3.5 kN)
Cable Capacity
Quantity Size
8 x 250 MCM (120 mm2)
6 x 500 MCM (240 mm2)
5 x 750 MCM (300 mm2)
Reel Weight Capacity 25,000 lbs. total (11,300 kg)
Size
41" long x 27.5" wide x 37.5" high
(1040 mm x 699 mm x 953 mm)
Weight
285 lbs. (130 kg)
Tire Pressure 50psi (2.4 bar)
www.greenlee.com
UG5 Ultra GLIDER™ Cable Pulling Lubrication System
The Greenlee UG5 Ultra Glider™ is the “new way” to effectively apply
cable lube during cable installation. The Ultra GLIDER™ has several
advantages over the manual method used by most contractors today.
10357
10359
10360
UG511
UG512
UGSAK
10354
10358
10252
UGTAK
10253
UGSA150
UGSA200
UGSA250
UGSA300
UGSA350
UGSA400
UGSA500
UGSA600
UGTA075
UGTA100
UGTA125
UGTA150
UGTA200
UGTA250
UGTA300
UGTA350
UGTA400
12656
10287
10289
10291
10293
10295
10297
10304
10311
10284
10285
10286
10278
10279
10280
10281
10282
10283
12656
147
= new product
= Replacement Part
= Accessory
INTERNATIONAL
UG512S
UG512T
UG512ST
ULTRA-GLIDER 120V with UGSAK slip-in applicator kit
ULTRA-GLIDER 120V with UGTAK threaded applicator kit
ULTRA-GLIDER 120V including slip-in applicator kit
UGSAK & threaded applicator kit UGTAK
ULTRA-GLIDER 12V with UGSAK slip-in applicator kit
ULTRA-GLIDER 12V with UGTAK threaded applicator kit
ULTRA-GLIDER 12V including slip-in applicator kit
UGSAK & threaded applicator kit UGTAK
ULTRA-GLIDER 120V ASSEMBLY without applicators
ULTRA-GLIDER 12V ASSEMBLY without applicators
Slip-In Applicator Kit (Includes 2", 2-1/2", 3", 3-1/2"
and 4" applicators with case)
Threaded Applicator Kit (Includes 2", 2-1/2", 3",
3-1/2" and 4" applicators with case)
1-1/2" Slip-In Applicator Assembly
2" Slip-In Applicator Assembly
2-1/2" Slip-In Applicator Assembly
3" Slip-In Applicator Assembly
3-1/2" Slip-In Applicator Assembly
4" Slip-In Applicator Assembly
5" Slip-In Applicator Assembly
6" Slip-In Applicator Assembly
3/4" Threaded Applicator Assembly
1" Threaded Applicator Assembly
1-1/4" Threaded Applicator Assembly
1-1/2" Threaded Applicator Assembly
2" Threaded Applicator Assembly
2-1/2" Threaded Applicator Assembly
3" Threaded Applicator Assembly
3-1/2" Threaded Applicator Assembly
4" Threaded Applicator Assembly
20' Extension Hose (Maximum extension is 20')
Tel: +1.815.397.7070
Fax: +1.815.397.9247
10353
10355
10356
CANADA
Motor (120V unit only)
UG511S
UG511T
UG511ST
Tel: 800.435.0786
Fax: 800.524.2853
Weight
Wheel Diameter
Hose length
Battery (12V unit only)
Depth: 17" (0.43 m)
Width: 18" (0.45 mm)
Height: 39" (1 mm)
24 lbs. (11 kg)
8" (20 cm)
10' (3 m)
Type: Sealed lead acid rechargeable battery
DC output: 12-Volt
Weight: 14.5 lbs. (6.6kg)
Battery Life: Three to four 5 gallon buckets per
charge
AC output: 120-Volt
Amps: 6 Amps
Description
USA
Dimensions
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Specifications
Cat. No.
Cable Pulling
• Applies lube more evenly around the cable and more
consistently than can be done by hand. This reduces the
force required by the cable puller and reduces the chance for
damage to the cable.
• During a cable pull, the person feeding the cable usually can
also operate the Ultra GLIDER™, which reduces the need for
one person on the job.
• Eliminates the need for a person to place their hands near the
point where the cable enters the conduit or duct.
• Eliminates the mess and slippery surfaces associated with
manual cable lubrication.
• Applicators clean easily with water. Power unit and hose do not
require cleaning between jobs.
• 3 pump speeds make it easy to match the lube rate to the
needs of the pull.
MADE FOR THE TRADE!™
CABLE PULLERS
Cable Puller Selection Guide
Cable Pulling
pulling force
Maximum
weight
Cat. No.
Description
6800
Ultra Tugger™ 8 Power Cable Puller
152
6500 lbs.
8000 lbs.
86 lbs.
9 fpm
6501
Ultra Tugger™ 5 Power Cable Puller
153
4000 lbs.
5000 lbs.
84 lbs.
14.5 fpm
6001
Super Tugger® Power Cable Puller
154
4500 lbs.
6500 lbs.
108 lbs.
16.5 fpm
UT4
Ultra Tugger® 4 Power Cable Puller
155
3000 lbs.
4000 lbs.
175 lbs.
26/13 fpm
UT2
Ultra Tugger® 2 Power Cable Puller
156
2000 lbs.
2000 lbs.
67 lbs.
73/41 fpm
766
Hand Crank Wire Puller
157
1500 lbs.
35 lbs.
INTERNATIONAL
3.0 fpm
36.0 fpm
148
power
required rope
1-1/2 HP
electric
7/8" double braid
2000 lbs 4000 lbs 5000 lbs 6000 lbs 8000 lbs
7.5 fpm
7.0 fpm
6.0 fpm
11.0 fpm
9.5 fpm
1-1/2 HP
electric
3/4" double braid
11.0 fpm
7.5 fpm
6.0 fpm
1-1/2 HP
electric
3/4" double braid
20.0 fpm
10.0 fpm
1-1/4 HP
electric
9/16" double
braid
1 HP
electric
9/16" double
braid
22.0 fpm
†
6501
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
CANADA
no load
800
lbs
† – 766 comes with 200 ft. of aircraft-type steel swaged cable.
6800
USA
speed
Page
No. Continuous
UT4
6001
766
UT2
www.greenlee.com
Cable Puller Set-Up (UT8, UT5, 6001)
The equipment used is included in packages 6801,
6501, 6501-22, 6005, 6004, 6001 and 6001-22.
Rope is not included.
Operator is making an upward pull from the box
using the puller and Versi-Boom System attached
to the “T” stand.
Operator is making a downward pull from the box
using the puller with the floor mount anchored to
the floor.
Operator is making an upward pull from the box
using the puller and Versi-Boom Plus System
attached to the mobile carriage.
The "T" stand is an optional accessory for use with
the 6803, 6803B, 6805A, 6805B, 6805A-22, 6805B22, 6503, 6505 and 6505-22. Rope is not included.
The equipment used is included in packages
6805a, 6805a-22, 6805B, 6805B-22, 6802, 680222, 6800, 6800-22, 6505, 6505-22, 6005 and 6004.
Rope is not included.
The equipment used is included in packages 6805a,
6805a-22, 6805B, 6805B-22, 6505, 6505-22, and
6005. Rope is not included.
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
149
= new product
= Replacement Part
= Accessory
INTERNATIONAL
The equipment used is included in packages 6805a,
6805a-22, 6805B, 6805B-22, 6505, 6505-22, 6503,
6005 and 6004. Rope is not included.
CANADA
The equipment used is included in 6805a, 6805A-22,
6805B, 6805B-22, 6505, 6505-22 and 6005.
USA
Operator is making a downward pull from the box
using the puller with the chain mount (or vise chain
unit) mounted onto the conduit.
Tel: 800.435.0786
Fax: 800.451.2632
Operator is making an upward pull from the box
using the puller and Versi-Boom System attached to
the mobile carriage.
Cable Pulling
The Versi-Boom™ Plus System can reach into a
man-hole, yet allow the operator to run the puller
from above.
MADE FOR THE TRADE!™
Package Components
Ultra Tugger 8 - 8,000 lb
110 VAC
Cat. No. UPC No. Description
08000
Ultra Tugger 8 w/ force gauge
120 VAC 60 Hz
UT8-22 07924
Ultra Tugger 8 w/ force gauge
220 VAC 50 Hz
15000
15000
Ultra Tugger 5 w/ force gauge
120 VAC 60 Hz
UT5-22 07924
Ultra Tugger 5 w/ force gauge
120 VAC 60 Hz
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cable Pulling
08000
150
Ultra Tugger 5 - 5,000 lb
220 VAC
110 VAC
220 VAC
6800 6801 6803 6803B 6805A 6805B 6800-22 6805A-22 6805B-22 6500 6501 6503 6505 6500-22 6501-22 6505-22
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
00865
00865
Floor Mount
02846
02846
Chain Mount
00870
00870
Wheeled Carriage
✓
✓
✓
✓
✓
✓
✓
✓
✓
00871
00871
Boom Mount
✓
✓
✓
✓
✓
✓
✓
✓
✓
00864
00864
Nose Unit
✓
✓
✓
✓
✓
✓
✓
✓
✓
00863
00863
Elbow Unit
✓
✓
✓
✓
✓
✓
00835
00835
3' (.9 m) Boom Tube
✓
✓
✓
✓
✓
✓
00791
00791
4' (1.2 m) Boom Tube
✓
✓
✓
✓
✓
✓
✓
✓
✓
00781
00781
2-1/2" Screw-On Coupling
✓
✓
✓
✓
✓
✓
✓
✓
✓
00782
00782
3" Screw-On Coupling
✓
✓
✓
✓
✓
✓
✓
✓
✓
00784
00784
4" Screw-On Coupling
✓
✓
✓
✓
✓
✓
✓
✓
✓
00799
00799
Adapter for Screw-On Coupling
✓
✓
✓
✓
✓
✓
✓
✓
✓
00804
00804
2-1/2" Slip-In Coupling
✓
✓
✓
✓
✓
✓
✓
✓
✓
00811
00811
3" Slip-In Coupling
✓
✓
✓
✓
✓
✓
✓
✓
✓
00820
00820
4" Slip-In Coupling
✓
✓
✓
✓
✓
✓
✓
✓
✓
11152
11152
Storage Trays (2)
✓
✓
✓
✓
✓
✓
✓
✓
✓
3048
23362
Storage Box
✓
✓
✓
603
23405
Casters
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
08000
✓
✓
✓
02846
00865
00870 & 11230
6001
6037
✓
✓
29631
15000
✓
www.greenlee.com
Package Components
Super Tugger - 6,500 lb
110 VAC
Cat. No. UPC No. Description
29627
Cable Puller w/Force Gauge
120 VAC, 60 Hz
6001-22 31466
Cable Puller w/Force Gauge
220 VAC, 50 Hz
6001
4,000 lb. Cable Puller, 120 VAC, 60 Hz
35605
Floor Mount
29631
Vise Chains
11230
11230
11145
6004
6005
✓
✓
✓
6001-22
✓
✓
✓
✓
Wheeled Carriage
✓
✓
11145
Boom Mount
✓
✓
00791
00791
4' (1.2 m) Boom Tube
✓
✓
00864
00864
Nose Unit
✓
✓
00863
00863
Elbow Unit
✓
00835
00835
3' (.9 m) Boom Tube
✓
03661
03661
2" Screw-On Coupling
00781
00781
2-1/2" Screw-On Coupling
✓
✓
✓
✓
00782
00782
3" Screw-On Coupling
✓
00783
00783
3-1/2" Screw-On Coupling
✓
✓
00784
00784
4" Screw-On Coupling
✓
✓
Adapter for Screw-On Coupling
✓
✓
00804
2-1/2" Slip-In Coupling
✓
✓
00811
00811
3" Slip-In Coupling
✓
✓
00815
00815
3-1/2" Slip-In Coupling
✓
✓
00820
00820
4" Slip-In Coupling
✓
✓
11152
11152
Storage Trays (2)
✓
✓
651
15325
12" Hook Sheave
00784
00799
00782
00781
651
00815
00811
00820
00804
00791
00835
00871
151
= new product
= Replacement Part
= Accessory
INTERNATIONAL
00864
Tel: +1.815.397.7070
Fax: +1.815.397.9247
11145
Tel: 800.435.0786
Fax: 800.524.2853
00783
00863
11152
CANADA
03661
USA
00799
Tel: 800.435.0786
Fax: 800.451.2632
00799
00804
✓
Cable Pulling
21552
6037
6001
✓
UT4
29631
220 VAC
MADE FOR THE TRADE!™
Ultra Tugger® 8 (UT8) Cable Puller: 8000 lb. (35.8kN) rated
• 8,000 (35.8 kN) lbs. pulling force.
• Pulling speed ranges from 9 fpm at 2,000 lbs. to
6 fpm at 8,000 lbs.
• Mobile Versi-Boom™ system provides fast set-up with no anchors
to set or chains to mount.
• Boom uses 3" rigid steel conduit for easy length adjustment to pull
10 to 20 feet (3 to 6 m) of cable out of the box fast and easy.
• Direct gear drive
• Easy to move around jobsite with mobile carriage.
• Patented
NRTL/C
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cable Pulling
6805A
Cat. No.
UPC No.
Description
6800
00985
6800-22
6801
03196
00986
6803
12824
6803B
12133
6805a
02565
6805B
12131
6805a-22
6805B-22
03201
12132
00967
445
00867
00815
00783
654
34136
34137
34138
00967
24821
00867
00815
00783
34362
34136
34137
34138
Ultra Tugger 8 Cable Puller with Standard Force
Gauge, and Floor Mount
Same as 6800, except 220 VAC 50 Hz
Ultra Tugger 8 Cable Puller with Standard Force
Gauge, and Conduit Chain Mount
Ultra Tugger 8 Cable Puller Basic Package. Includes
standard force gauge, wheeled carriage, 4 ft. (1.2
m) boom, boom mount and nose unit, 2-1/2", 3"
and 4" slip-in couplings, 2-1/2", 3" and 4" screwon couplings. Rope and storage box are optional.
Same as 6803 plus 3048 Storage Box and 603
Casters
Ultra Tugger 8 Cable Puller Deluxe Package. Same
as 6503 plus 3-ft. (.9 m) boom, elbow unit and floor
mount. Rope and storage box are optional.
Same as 6805A plus 3048 Storage Box and 603
Casters
Same as 6805A, except 220 VAC 50 Hz
Same as 6805A-22 plus 3048 Storage Box and 603
Casters
Deluxe Force Gauge (see page 158)
Foot Switch (see page 159)
“T” Stand
3-1/2" Slip-in Coupling
3-1/2" Screw-on Coupling
Rope Stand
Pull Rope 7/8" x 300' (22.2 mm x 91 m)
Pull Rope 7/8" x 600' (22.2 mm x 182 m)
Pull Rope 7/8" x 1,200' (22.2 mm x 365 m)
SPECIFICATIONS
6803
Pulling Force
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
Tel: 800.435.0786
Fax: 800.524.2853
6800
6801
NOTE: Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection.
152
*See page 150 for UT8 component list
Maximum: 8,000 lbs. (35.8 kN)
Continuous: 6,500 lbs. (28.9 kN
Dimensions
Length: 11.5" (292 mm)
Width: 26" (660 mm)
Height
120V models: 6.75" (172 mm)
220V models: 10.0" (254 mm)
Weight
86 lbs. (39 kg) (08000 only)
Pulling Speed – Feet (Meters) Per Minute
No Load: 9 fpm (2.7 mpm)
At 2000 lbs. (0.9 kN): 8 fpm (2.4 mpm)
At 4000 lbs. (1.8 kN): 7.5 fpm (2.3 mpm)
At 6000 lbs. (2.7 kN): 7 fpm (2.1 mpm)
At 8000 lbs. (3.6 kN): 6 fpm (1.8 mpm)
Drive Motor
1-1/2 HP (1.1 kW)
Power
8000, 6800, 6801, 6803, 6803B, 6805A, 6805B =120 VAC 60Hz 20A
Requirements
UT8-22, 6800-22, 6805A-22, 6805B-22 = 220 VAC 50Hz
Required
7/8" diameter (22.2 mm); Double-Braided Polyester Composite – Rated
Rope
at 32,000 lbs. (142 kN) minimum breaking strength
www.greenlee.com
Ultra Tugger® 5 (UT5) Cable Puller: 5,000 lb. (22.2kN) Rated
• 5,000 lbs. (22.3 kN) pulling force, enough power to pull most
500 kcmil (240 mm2) jobs of 500 feet (152 m) or less.
• Pull speed range of 9 to 14 fpm (2.7 to 4.3 mpm) will complete most
500 ft. (152 m) pulls in 1 hour or less.
• Mobile Versi-Boom™ system provides fast setup with no anchors to set
or chains to mount.
• Boom uses 3" rigid steel conduit for easy length adjustment to pull 10
to 20 feet (3 to 6 m) of cable out of the box fast and easy.
• Use 6501 Ultra Tugger 5,000 lb. (22.3 kN) capacity cable puller power
unit with current 6805A Ultra Tugger wheeled carriage and boom to
pull cable faster.
• Patented.
NRTL/C
Description
6500
12822
6501
11221
6501-22
6503
19232
11222
6505
11223
6505-22
00967
445
00867
00815
00783
654
3048
603
35098
32743
00967
24821
00867
00815
00783
34362
23362
23405
35098
35100
35101
35100
35101
Ultra Tugger® 5 Cable Puller Power Unit only with
standard force gauge and floor mount
Ultra Tugger® 5 Cable Puller Power Unit with
standard force gauge and chain mount and vise chains
Same as 6505, except 220 VAC 50 Hz
Ultra Tugger® 5 Cable Puller Basic Package. Includes standard
force gauge, wheeled carriage, 4 ft. (1.2 m) boom, boom mount
and nose unit, 2-1/2", 3" and 4" slip-in couplings, 2-1/2", 3"
and 4" screw-on couplings. Rope and storage box are optional.
Ultra Tugger® 5 Cable Puller Deluxe Package. Same as
6503 plus 3-ft. (.9 m) boom, elbow unit and floor mount.
Rope and storage box are optional.
Same as 6505, except 220 VAC 50 Hz
Deluxe Force Gauge (See page 158)
Foot Switch (See page 159)
“T” Stand
3-1/2" Slip-in Coupling
3-1/2" Screw-on Coupling
Rope Stand
Storage Box
Casters – 2 Rigid, 2 Swivel
Pull Rope, 3/4" x 300 ft. (19.1 mm x 91 m)
Double-Braided Composite
Pull Rope, 3/4" x 600' (19.1 mm x 182 m)
Pull Rope, 3/4" x 1,200' (19.1 mm x 365 m)
Specifications
Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection.
*See page 150 for UT5 component list
= new product
= Replacement Part
153
= Accessory
INTERNATIONAL
15000, 6501, 6503, 6505 – 120 VAC 60Hz 20A
UT5-22, 6505-22 – 220 VAC 50Hz
3/4" (19.1 mm) Double-Braided Polyester Composite - Rated at 20,000 lb.
(88.8 kN) minimum breaking strength
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Power
Requirements
Required Rope
Tel: 800.435.0786
Fax: 800.524.2853
6501
Maximum: 5,000 lbs. (22.2 kN)
Continuous: 4,000 lbs. (17.8 kN)
Dimensions
Length: 11.5" (292 mm)
Width: 26" (660 mm)
Height: 6.75" (172 mm)
Height
120V models: 6.75" (172 mm)
220V models: 10.0" (254 mm)
Weight
84 lbs. (38 kg) (15000 only)
Pulling Speed – Feet (Meters) Per Minute
No Load: 14.5 fpm (4.4 mpm)
At 4000 lbs. (1.8 kN): 11 fpm (3.4 mpm)
At 5000 lbs. (2.3 kN): 9.5 fpm (2.9 mpm)
Drive Motor
1-1/2 HP (1.1 kW)
CANADA
Pulling Force
6503
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
Cable Pulling
6505
MADE FOR THE TRADE!™
Super Tugger® Cable Puller: 6500 lb. (28.9 kN) rated
• Pull up to 6,500 lbs. (28.9 kN) with less than 27 lbs. (120 N) of operator effort.
• Unique floor mounting attachment for quick, reliable setup.
• Leaf-type mounting chains won't twist when tightening.
• Heat-treated steel serrated gripper feet for secure mounting to conduit.
• Force Gauge included to constantly monitor the pull.
• Right-angle sheave allows the operator to stand out of the direct line of force.
• Audio alarm high force warning and circuit breaker shut off at maximum force
for added safety.
• Tapered capstan and patented rope guidance system for better control of the
rope when feeding onto the capstan.
• Patented.
NRTL/C
INTERNATIONAL
CANADA
Cat. No.
UPC No.
Description
6001
29627
6001-22
6004
31466
56358
6005
56359
35098
35100
35101
445
3048
35098
35100
35101
24821
23362
Super Tugger Cable Puller Power Unit, Includes force gauge
and vise chains
Same as 6001 except 220 VAC 50 HZ
Super Tugger Complete Puller Package, Includes 6001 Super
Tugger, Floor Mount, Mobile Carriage, Boom Mount, 4' Boom Tube,
Nose Unit, 2 1/2", 3", 3 1/2", 4" Slip-in and Screw-On Couplings
and Storage Trays
Super Tugger Complete Puller Package, Includes 6001 Super
Tugger, Floor Mount, Mobile Carriage, Boom Mount, 4' Boom Tube,
Nose Unit, 3' Boom Tube, Elbow Unit, 2 1/2", 3", 3 1/2", 4" Slip-in
and Screw-On Couplings and Storage Trays
Double-Braided Composite Rope 3/4" × 300' (19.1 mm × 91 m)
Double-Braided Composite Rope 3/4" × 600' (19.1 mm × 182 m)
Double-Braided Composite Rope 3/4" × 1,200' (19.1 mm × 365 m)
Foot Switch (See page 159)
Storage Box (See page 410)
SPECIFICATIONS
Pulling Force
Maximum: 6,500 lbs. (28.9 kN)
Continuous: 4,500 lbs. (20 kN)
Dimensions
Length: 20-3/4" (527 mm)
Width: 22-1/2" (572 mm)
Height: 12" (305 mm)
Weight
6001, 6001-22: 108 lbs. (49 kg)
6003: 454 lbs. (206 kg)
6000, 6000-22: 550 lbs. (250 kg)
6006, 6006-22: 612 lbs. (278 kg)
Pulling Speed – Feet (Meters) Per Minute
No Load: 16.5 (5)
At 2000 lbs.: (8.8 kN) – 11 (3.4)
At 4000 lbs.: (17.9 kN) – 7.5 (2.3)
At 6000 lbs.: (26.7 kN) – 6 (1.8)
Drive Motor
1-1/2 HP (1.1 kW)
Power Requirements
6001, 6004, 6005 – 120 VAC 16Hz 20A
6001-22 – 220 VAC 50Hz
Required Rope
3/4" (19.1 mm) Double-Braided Composite
– Rated at 26,000 lbs. (115.6 kN)
6004
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cable Pulling
6005
6001
NOTE: Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection.
154
www.greenlee.com
Ultra Tugger® 4 (UT4) Cable Puller: 4,000 lb. (22.2kN) Rated
UT4
Cable Pulling
Connect for an upward pull
Connect for an downward pull
Connect at floor height
Low Pulling Speeds:
*Pulling Rope:
No Load 26 fpm (8 mpm)
2,000 lbs. (909 kg) 20 fpm (6 mpm)
No Load 13 fpm (4 mpm)
2,000 lbs. (909 kg) 10 fpm (3 mpm)
9/16" diameter double braided composite
(16,000 lbs. minimum breaking strength)
2" to 4"
175 lbs. (80kg)
1-1/4 hp, 120 VAC, 60 Hz
120 V, 15 Amp
Standard
Standard
8' (2.4 m) maximum
12' (3.6 m) maximum
3 x 750 kmil cable 600' with 2 x 90° bends
4 x 350 kmil cable 400' with 4 x 90° bends
3 x 500 kmil cable 400' with 3 x 90° bends
* Greenlee recommends that only low stretch double braided composite rope
be used with the UT4. High stretch ropes can release large amounts of energy
should they break during use.
155
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Conduit Size:
Weight:
Drive Motor:
Electrical Plug:
Force Gauge:
Foot Switch:
Standard Boom
Extension:
Optional Long Boom
Extension:
Pulling Capability:
CANADA
4,000 lb. Cable Puller
Floor Mount for UT4 Cable Puller
12' Long Extension Boom for UT4 Cable Puller
Double-Braided Composite Rope 9/16" × 300' (14.3 mm × 91 m)
Double-Braided Composite Rope 9/16" × 600' (14.3 × 182 m)
Double-Braided Composite Rope 9/16" × 1,200 (14.3 mm × 365 m)
Storage Box
Storage Box (requires boom to be removed from puller)
Continuous Pulling
Force:
High Pulling Speeds:
High Speed 2,000 lbs. (909 kg)
Low Speed 4,000 lbs. (1,818 kg)
Low Speed 3,000 lbs. (1,364 kg)
USA
21552
10014
10015
35283
35284
35285
23362
31651
Maximum Pulling Force
Tel: +1.815.397.7070
Fax: +1.815.397.9247
UT4
10014
10015
35283
35284
35285
3048
2142
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No. UPC No. Description
Optional floor mount
Tel: 800.435.0786
Fax: 800.451.2632
• Two pulling speeds to match the job.
• Quick Latch system attaches to the outside of threaded and
unthreaded conduit without the need for adapters.
• Quick Set-Ups & Tear Downs- roll it to the job, adjust the boom and
nose & attach it to the conduit.
• Boom extends to 8'. A 12' boom extension accessory is available.
• Integral foot operated on/off switch.
• Nose can be turned for up, down & side pulls.
• Rolls easily between job locations.
• Available floor mount accessory for use in tight spaces.
• Patented.
Optional 12' boom extension for
high pulls
MADE FOR THE TRADE!™
Ultra Tugger® 2 Cable Puller: 2000 lb. (8.8 kN) Rated
Cable Pulling
• Quick Latch System attaches to all conduit sizes with no loose parts.
• Adjustable elbow and extendable boom adjust easily to fit your job needs.
• Right Angle Sheave keeps operator out of direct line with the pulling rope.
• Dual Diameter capstan provides 2 pulling speeds.
• Cross Tube provides a solid base for setup and during pull.
• Integral Motor designed specifically for cable pulling applications.
• Circuit Breaker stops the puller motor if it becomes overloaded.
• Wheels provide easy movement around jobsite.
Cat. No.
UPC No. Description
UT2
56362
2448
455
456
445
02010
56362
23273
23774
23777
24821
2,000 LB. Cable Puller Unit
Trailer hitch adapter (fits 2" receiver)
Storage Box
1/2" × 300' (12.7 mm × 91 m) Double Braided Rope
1/2" x 600' (12.7 mm × 182 m) Double Braided Rope
Foot Switch (See page 159)
Specifications
Pulling Force
High Speed Capstan 1,000 lb. (455 kg) continuous
Low Speed Capstan 2,000 lb. (909 kg) continuous
120 VAC, 50/60 Hz, 12 Amps
67 lbs.
High Speed Capstan
No Load: 73 fpm (22 mpm)
500 lb. Load (227 kg) 36 fpm (11 mpm)
1,000 lb. Load (455 kg) 22 fpm (7 mpm)
Drive Motor
Weight
Pulling Speeds
Low Speed Capstan
No Load: 41 fpm (12 mpm)
1,000 lb. Load (455 kg) 36 fpm (11 mpm)
2,000 lb. Load (909 kg) 22 fpm (7 mpm)
1/2" polyester (10,000 lb. minimum breaking strength)
*Greenlee recommends that only low stretch polyester
rope be used with the UT2. High stretch ropes can release
large amounts of energy should they break during use.
1" or larger
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Pulling Capabilities
Up Pull
down Pull
UT2
NOTE: Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection.
156
3 x 500 kcmil cable 500’ with 2 x 90˚ bends
3 x 500 kcmil cable 250’ with 4 x 90˚ bends
8 x 4/0 AWG cable 300’ with 3 x 90˚ bends
side Pull
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Conduit Size
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Pulling Rope
www.greenlee.com
Hand Crank Wire Puller
• Pull up to 1500 lbs. (6.7 kN) with only 30 lbs. (133 N)
of crank handle force.
• Two-speed ratchet winder for fast, efficient operation.
• Has 200' (61 m) of steel aircraft cable.
• Completely self-contained and ready to operate.
Cat. No.
UPC No.
Description
766
50954
13955
28280
18202
50954
14568
28280
Hand Crank Wire Puller
200' (61 m) spool of steel cable
Shear Pin
Crank Handle Assembly
Pulling Force
Size
Weight
Power
Dimensions
Maximum - 1500 lbs. (6.6 kN)
200' (61 m) pulling cable length
38 lbs. (17.2 kg)
Manual - 2-Speed Hand Crank
Length - 52" (1.32 m)
Width - 18" (457 mm)
Height - 10" (254 mm)
Cable Pulling
SPECIFICATIONS
11147 Ultra Tugger® 640/6001 Adapter Package
Description
11147
11147
00863
00835
00815
00827
00781
00783
3048
00863
00835
00815
00827
00781
00783
23362
Ultra Tugger 640/6001 Adapter Package Includes
wheeled carriage, 4 ft. (1.2 m) boom, boom
adapter, nose unit, 2-1/2", 3" and 4" slip-in
couplings and 2", 3" and 4" screw-on couplings
Elbow Unit
3 ft. (.9 m) Boom
Slip-in Coupling, 3-1/2"
Slip-in Coupling, 5"
Screw-on Coupling, 2-1/2"
Screw-on Coupling, 3-1/2"
Storage Box
• Adapt Greenlee 640 Tugger and 6001 Super Tugger to Ultra Tugger
Wheeled Carriage and Boom for faster and easier cable puller setups.
• Wheeled carriage and boom provides fast setup with no anchors
to set or chains to mount.
• Boom uses 3" rigid steel conduit for easy length adjustment to pull 10
feet (3m) of cable out of the box fast and easy.
• Optional Elbow Unit and Boom available to reach into manholes or pull
up to 20 feet (6 m) of cable out of the box.
• Patent pending.
SPECIFICATIONS
= Replacement Part
= Accessory
INTERNATIONAL
157
= new product
CANADA
00863
Tel: +1.815.397.7070
Fax: +1.815.397.9247
11147
198 lbs. (90 kg)
91-1/2" (232 cm)
27" (69 cm)
38-1/2" (98 cm)
Greenlee 640 and 6001 Cable Pullers
6500 lbs. (28.9 kN)
Tel: 800.435.0786
Fax: 800.524.2853
Weight
Length
Width
Height
Use With
Load Rating
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
MADE FOR THE TRADE!™
TUGGER ACCESSORIES
Speed Booster (for UT8 and UT5)
Cable Pulling
• The Speed Booster increases the speed of the Tugger to pull
approximately twice as fast as normal.
• For use with the Greenlee Ultra Tugger 5 and Ultra Tugger 8
cable pullers only.
• Increases productivity on lower force runs and during the initial
phase of a high force pull.
• Automatically switches to low speed at 2,500 lbs. (11.1 kN) to
protect the puller motor.
• Ultra Tugger adapter cord and plug included.
Cat. No.
UPC No.
Des cription
03561
04884
03561
04884
Ultra Tugger Speed Booster
Ultra Tugger Cord and Plug Kit
SPECIFICATIONS
Capacity
Dimensions
Weight
Pulling Speed,
Ultra Tugger 5
Pulling Speed,
Ultra Tugger 8
Power
0 to 2,500 lbs. (11.1 kN) pulling force in high speed mode
Height: 9.5" (241.3 mm); Width 13" (330.2 mm);
Depth: 15.5" (393.7 mm)
46 lbs. (20.9 kg)
No Load - 28 fpm (8.5 mpm);
At 1200 lbs. (5.3 kN) - 25 fpm (7.6 mpm)
No Load - 18 fpm (5.5 mpm);
At 2000 lbs. (8.8 kN) - 16 fpm (4.9 mpm)
115 VAC, 15A Input; 115/230 VAC, 15/6A Output
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Deluxe Force Gauge
158
• Measures tension on the rope, to an accuracy of ± 5%.
• Accuracy is not affected by initial rope size, or the change in
rope size as it is loaded.
• 0-10 VDC Analog output to optional strip chart recorder for
permanent record of pulling force.
• Switchable 120VAC receptacle for chart recorder.
• Use with pulling rope up to 7/8" diameter (22.2 mm)
maximum. Also use with Kevlar® tape.
Cat. No.
UPC No.
Description
00967
33901
22410
22451
00967
33901
22410
22451
Deluxe Force Gauge
Strip Chart Recorder
Fan Fold Chart Paper- 15 pack
Recorder Pens- 5 pack
SPECIFICATIONS
Deluxe Force Gauge
Accuracy ± 5%
• Use with any puller that uses Versi-Boom system.
Including : 6805A, 6805A-22, 6803, 6505, 6505-22, 6503, 6005, 6004, 645 and
643
www.greenlee.com
Cable Pull Force Estimator
• Calculates estimated cable pulling force requirements based on
user inputs
• Simple to follow instructions included on the calculator
• Consists of an Excel based calculator that can be used either from
the supplied CD or downloaded.
• Works with Windows 7, Vista, XP and Mac OS.
Cat. No.
UPC No.
Description
PF8
20956
Cable Pull Force Estimator* (CD-ROM)
Foot Switch for Cable Pullers
• Use with UT2, 640, 6001, 6500 or 6800 cable pullers to add foot control.
• Foot pressure required to operate.
Cat. No.
UPC No.
Description
445
24821
Foot Switch
Cable Pulling
*Microsoft® Excel Required
SPECIFICATIONS
Power Source
Weight
120 VAC
9.5 lbs. (4.3 kg)
Slip-in Couplings
3-1/2"
Optional
Cat. No.
UPC No.
00804
00811
00815
00820
00827
00804
00811
00815
00820
00827
size
2.5"
3"
3.5"
4"
5"
weight
6 lbs (2.7 kg)
7 lbs (3.2 kg)
9 lbs (4.1 kg)
11 lbs (5 kg)
13 lbs (5.8 kg)
2-1/2"
3"
3-1/2"
Adapter
4"
Cat. No.
UPC No.
Description
weight
Cat. No.
UPC No.
size
weight
00799
00877
00799
00877
Adapter
Screw Assembly
7.4 lbs (3.4 kg)
0.5 lbs (0.2 kg)
00868
03661
00781
00782
00783
00784
00868
03661
00781
00782
00783
00784
2-1/2", 3", 3-1/2", and 4"
2"
2-1/2"
3"
3-1/2"
4"
22 lbs (10.0 kg)
2.1 lbs (1.0 kg)
3.1 lbs (1.4 kg)
4.4 lbs (2.2 kg)
5.6 lbs (2.5 kg)
5.7 lbs (2.6 kg)
= new product
= Replacement Part
= Accessory
159
INTERNATIONAL
Screw Assembly
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Use to attach the Versi-Boom™ to the conduit when pulling
from overhead.
• The coupling and adapter threads onto the conduit and pins
to the Versi-Boom.
• The screw-on coupling and adapter must be used together.
One adapter fits all of the screw-on couplings.
CANADA
2"
Tel: 800.435.0786
Fax: 800.524.2853
Screw-on Couplings
Tel: 800.435.0786
Fax: 800.451.2632
2-1/2"
USA
3"
• Use to attach the Versi-Boom™ to the conduit.
• Couplings slip into the conduit and pin to the Versi-Boom.
• For use with the Versi-Boom system only.
5"
4"
MADE FOR THE TRADE!™
Hook Sheaves - 8,000lb Capacity
24"
18"
Sheave
Diameter
Description
Roll Pin
Sheave Pin
Sheave Pin Clip
Sheave Unit
Yoke Frame
Cable Pulling
12"
Specifications
Cat. no. UPC No. Outside Diameter Inside Radius
8012
00872
12" (304.8 mm)
3-7/8" (98.4 mm)
8018
00873
18" (457.2 mm)
7" (177.8 mm)
8024
00874
24" (609.6 mm)
9-7/8" (250.8 mm)
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Maximum Rated Capacity
Weight
4,000 lbs. (17.8 kN)
650 - 8.8 lbs. (4 kg)
651 - 15 lbs. (6.8 kg)
652 - 25 lbs. (11.3 kg)
653 - 35 lbs. (15.9 kg)
Weight
28 lbs (12.7 kg)
44 lbs (19.9 kg)
67 lbs (30.3 kg)
8024
24" (609.6 mm)
Cat. no. UPC No.
50700
50700
00850
00850
50302
50302
00845
00845
00856
00856
Maximum Rated Capacity
8,000 lbs. (35.8 kN)
8,000 lbs. (35.8 kN)
8,000 lbs. (35.8 kN)
Cat. No.
UPC No.
Description
650
15324
651
15325
652
15326
653
15327
6" (152.4 mm) dia. Hook Sheave with 1-1/2" (38.1 mm)
minimum radius
12" (304.8 mm) dia. Hook Sheave with 3-5/16" (84.1 mm)
minimum radius
18" (457.2 mm) dia. Hook Sheave with 7" (177.8 mm)
minimum radius
24" (609.6 mm) dia. Hook Sheave with 9-13/16" (249.2
mm) minimum radius
650
651
652
653
6" (152.4 mm) 12" (304.8 mm) 18" (457.2 mm) 24" (609.6 mm)
Cat. no. UPC No. Cat. no. UPC No. Cat. no. UPC No. Cat. no. UPC No.
Sheave Pin
16797
Sheave Pin Clip (2) 50302
Sheave
15362
Sheave Bushing (2) 16798
Yoke Frame
16799
16797
50302
15362
16798
16799
16797
50302
15358
16798
16800
16797
50302
15358
16798
16800
16797
50302
15363
16798
16801
16797
50302
15363
16798
16801
16797
50302
15364
16798
16802
16797
50302
15364
16798
16802
Right-Angle Twin Yoke Sheave - 4,000lb Capacity
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
SPECIFICATIONS
8018
18" (457.2 mm)
Cat. no. UPC No.
50700
50700
00846
00846
50302
50302
00844
00844
00855
00855
• Strong, welded steel frames.
• Forged steel closure-type hooks with 1" (25.4 mm) opening.
• 5" (127 mm) wide aluminum alloy sheaves with self-lubricating bearings.
• Select a sheave with a maximum rated capacity that meets or exceeds
the cable puller’s maximum pulling force.
Sheave
Diameter
Description
• 9-13/16" (249 mm) minimum radius.
• Strong welded steel yokes.
• Forged steel closure type hook with 1" (25.4 mm) opening.
• 5" (127 mm) wide aluminum alloy sheave with self-lubricating bearings.
• Yokes rotate independently to fit various setups.
• Use with any cable puller whose maximum pulling force is 4,000 lbs.
(17.8 kN) or less.
Tel: 800.435.0786
Fax: 800.451.2632
USA
653
8012
12" (304.8 mm)
Cat. no. UPC No.
50700
50700
00838
00838
50302
50302
00843
00843
00854
00854
Width
5" (127 mm)
6" (152.4 mm)
6-1/2" (165.1 mm)
Hook-Type Sheaves - 4,000lb Capacity
650
SPECIFICATIONS
160
• For use with UT8, UT5, 6001, UT4 and UT2 cable pullers.
• Strong, welded steel frames.
• Forged steel closure type hooks with 1" (25.4 mm) opening.
• All three sheaves are aluminum alloy with self-lubricating bearings.
Maximum Rated Capacity
Weight
4,000 lbs. (17.8 kN)
45 lbs. (20.4 kg)
Cat. No.
UPC No.
Description
639
17265
Right Angle Twin Yoke Sheave with 9-13/16" (249 mm)
minimum radius
Sheave
Description
Sheave Pin
Sheave Pin Clip
Sheave
Sheave Bushing
Yoke Frame
639
Cat. no.
17266
50302
15364
16798
17299
UPC No.
17266
50302
15364
16798
17299
Quantity
1
2
1
2
2
NOTE: Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection.
www.greenlee.com
Conveyor Sheaves - 4,000lb Capacity
• Welded steel frame with a series of sheaves to form a large radius.
• Yokes with cast steel closure-type hooks with a 1" (25.4 mm) opening.
• 5" (127 mm) wide aluminum alloy sheaves.
• Use with any cable puller whose maximum pulling force is 4,000 lbs.
(17.8 kN) or less.
UPC No.
Description
4024
4036
4048
19185
15362
19186
50302
31573
26368
26369
26370
19185
15362
19186
50302
31573
24" (609.6 mm) Conveyor Sheave with 6 sheave wheels
36" (914.4 mm) Conveyor Sheave with 8 sheave wheels
48" (1219 mm) Conveyor Sheave with 10 sheave wheels
Yoke frame
Sheave w/bearings
Sheave Pin
Sheave Pin Clip (2)
Sheave Pin
SPECIFICATIONS
Maximum Pulling Force
Weight
4,000 lbs. (17.8 kN)
4024 - 54 lbs. (24.5 kg)
4036 - 60 lbs. (27 kg)
4048 - 83 lbs. (38 kg)
Cable Pulling
Cat. No.
Triple Sheave Cable Guide - 6,500lb Capacity
Description
6036
31569
Triple Sheave Cable Guide
SPECIFICATIONS
161
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
6,500 lbs. (28.9 kN)
28 lbs. (12.7 kg)
CANADA
UPC No.
Quantity
3
6
1
2
6
3
USA
UPC No.
31573
51434
29600
50302
16798
15362
Sheave Bolt is a 3/8"-24 x 3/4" hex head socket head cap screw (grade 5) and is available at
most hardware stores.
Cat. No.
Maximum Rated Capacity
Weight
6036
Cat. no.
31573
51434
29600
50302
16798
15362
Tel: 800.435.0786
Fax: 800.524.2853
Sheave
Description
Sheave Axle
Sheave Bolt Washer
Sheave Pin
Sheave Pin Clip
Sheave Bushing
Sheave
Tel: 800.435.0786
Fax: 800.451.2632
• Adjustable center sheave for 19-1/2" (495 mm) or 36" (914 mm) radius.
• Forged steel closure type hook with 1-1/2" (38.1 mm) opening.
• Aluminum frames for light weight.
• Steel yoke is pinned for easy removal.
• 21-7/8" (555 mm) high, 24" (610 mm) long, 7-3/8" (187 mm) wide
with 5" (127 mm) wide sheaves.
• Use with any cable puller whose maximum pulling force
is 6,500 lbs. (28.9 kN) or less.
MADE FOR THE TRADE!™
Feeding Sheaves
Cable Pulling
• Yoke frame slides into the end of conduit and holds sheave, allowing the
cable being fed into the conduit to smoothly roll over the sheave.
• 5" (127 mm) wide aluminum alloy sheave with self-lubricating bearings.
• Split tube for easy removal after cable is installed.
• See the Capacity Table (below).
SPECIFICATIONS
Rated Capacity See Capacity Table Below for details.
Weight
Width of Shaft Opening
441-2 – 9 lbs. (4.5 kg)
441-2 – 1.24"
441-2-1/2 – 11 lbs. (5 kg)
441-2-1/2 – 1.37"
441-3 – 14 lbs. (6.4 kg)
441-3 – 1.79"
441-3-1/2 – 17 lbs. (7.7 kg)
441-3-1/2 – 1.75"
441-4 – 19 lbs. (8.6 kg)
441-4 – 1.99"
441-5 – 26 lbs. (11.8 kg)
441-5 – 2.23"
441- 6 – 28 lbs. (12.7 kg)
441- 6 – 2.75"
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Sheave
Conduit Size
Description
Sheave Pin
Sheave Pin Clip (2)
Sheave
162
441-2
2" conduit
Cat. no. UPC No.
25160
25160
50302
50302
15362
15362
UNOCCUPIED MANHOLE
ABOVE GROUND
441-2-1/2
2-1/2" conduit
Cat. no. UPC No.
25160
25160
50302
50302
15362
15362
UNOCCUPIED MANHOLE
UNOCCUPIED MANHOLE
Cat. No.
UPC No.
Description
441-2
441-2-1/2
441-3
441-3-1/2
441-4
441-5
441-6
30183
30358
30188
30363
30347
30193
13460
Feeding Sheave for 2" conduit
Feeding Sheave for 2-1/2" conduit
Feeding Sheave for 3" conduit
Feeding Sheave for 3-1/2" conduit
Feeding Sheave for 4" conduit
Feeding Sheave for 5" conduit
Feeding Sheave for 6" conduit
441-2
441-2-1/2
441-3
3" conduit
Cat. no. UPC No.
25160
25160
50302
50302
15362
15362
441-3
441-3-1/2
441-3-1/2
3-1/2" conduit
Cat. no. UPC No.
25160
25160
50302
50302
15362
15362
Capacity Table
Angle
of Pull 441-2
15°
1750 lbs.
7.7 kN
30°
900 lbs.
4.0 kN
45°
650 lbs.
2.8 kN
60°
500 lbs.
2.2 kN
75°
450 lbs.
2.0 kN
90°
450 lbs.
2.0 kN
441-2-1/2
1900 lbs.
8.4 kN
1000 lbs.
4.4 kN
700 lbs.
3.1 kN
550 lbs.
2.4 kN
500 lbs.
2.2 kN
500 lbs.
2.2 kN
441-4
441-4
4" conduit
Cat. no. UPC No.
25160
25160
50302
50302
15362
15362
441-3
6050 lbs.
26.9 kN
3150 lbs.
14.0 kN
2200 lbs.
9.7 kN
1800 lbs.
8.0 kN
1600 lbs.
7.1 kN
1550 lbs.
6.8 kN
441-3-1/2
6500 lbs.
28.9 kN
5050 lbs.
22.4 kN
3550 lbs.
15.7 kN
2900 lbs.
12.8 kN
2600 lbs.
11.5 kN
2500 lbs.
11.1 kN
441-5
441-6
441-5
5" conduit
Cat. no. UPC No.
25160
25160
50302
50302
15362
15362
441-4
6500 lbs.
28.9 kN
6500 lbs.
28.9 kN
5200 lbs.
23.1 kN
4200 lbs.
18.6 kN
3650 lbs.
16.2 kN
3500 lbs.
15.5 kN
441-5
6500lbs.
28.9 kN
6500 lbs.
28.9 kN
6500 lbs.
28.9 kN
6000 lbs.
26.6 kN
5500 lbs.
24.4 kN
5250 lbs.
23.3 kN
Manhole Sheaves for UT2®, Tugger® and Super Tugger®
• High-strength aluminum alloy frame for easy setup.
• Adjustable, a full range of sheave pin positions over the frame length
to accommodate most manhole setups.
• 18" (457 mm) diameter aluminum alloy sheaves with 7" (178 mm)
minimum radius and 5" (127 mm) width.
• Self-lubricating bearings for easier cable pulling.
SPECIFICATIONS
Maximum Rated Capacity
Weight
6072 - 6,500 lbs. (28.9 kN)
6072 - 190 lbs. (86.2 kN)
Cat. No.
UPC No.
Description
6072
31395
12' (3.7 m) Manhole Sheave
NOTE: Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection.
www.greenlee.com
Nylon Cable Protector
• Fits in the end of conduit to shield the cable from sharp edges
as it is being fed through.
• Rugged nylon resists abrasion.
Cat. No.
UPC No.
Description
488-2
488-3
32928
32929
Nylon Cable Protector for 2" and 2-1/2" conduit
Nylon Cable Protector for 3" - 6" conduit
SPECIFICATIONS
Weight
Cable Guide
• Position where cables are being pulled over sharp edges.
Cat. No.
UPC No.
Description
489
32930
Nylon Cable Guide
SPECIFICATIONS
Weight
Size
Cable Pulling
488-2 - 0.08 lbs. (36 g)
488-3 - 0.2 lbs. (90 g)
489 - .5 lbs. (227 g)
13" L x 3-1/4" W x 12" radius
Light Base Sheave
• Mounts directly to existing square light pole bolt patterns.
• Slotted mounting holes fit a wide range of bolt circle sizes.
• Tall enough to position sheave above most conduits.
• Rugged welded steel base structure.
• Allows user to install wires into outdoor light bases by pulling horizontally.
• Also can be used to feed wires into vertical light base conduit.
Description
459
89800
Light Base Sheave
SPECIFICATIONS
Overall Height
Weight
Bolt Circle Capability
Maximum Mounting Bolt Dia.
= new product
3" (76 mm) square
2 lb. (1 kg)
= Replacement Part
= Accessory
Cat. No.
UPC No.
Description
CR25
12211
Cable Roller Guide
NOTE: Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection.
163
INTERNATIONAL
SPECIFICATIONS
Roller Opening Size
Weight
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Six nylon rollers provide smooth movement of cable and prevent
cable damage.
• Pull pin makes opening and closing to insert and remove cables a simple
one step operation.
• Adjustment clamp allows the CR25 to be swiveled and/or rotated into
any position.
• Heavy duty 12 gauge cold rolled steel construction for durability and zinc
dichromate finish prevents corrosion.
• Up to 20 network cables can be pulled at one time.
• Easily attaches to wooden framing members using a lag bolt and the hole
in the mounting bracket of the CR25.
• May also be used with coax, NM, small size THHN, and similar cables.
CANADA
CR25
Tel: 800.435.0786
Fax: 800.524.2853
Pulling Capacity
14-1/2" (368 mm)
18 lbs. (8.2 kg)
7.8" (198 mm) to 14.8" (376 mm) diameter
1" (25 mm) diameter at 7.8" (198 mm) bolt circle
1-1/2" (38 mm) at 14.8" (376 mm) bolt circle
500 lbs. (227 kg)
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
MADE FOR THE TRADE!™
CABLE TRAY ACCESSORIES
Tray-Type Sheaves
659
Cable Pulling
658
2"
Inside
3-3/8"
2"
Inside
INTERNATIONAL
5-5/8"
Right Angle Rollers
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Radius Cable Rollers
CANADA
658
659
15332
19094
Tray-Type Sheave
Tray-Type Sheave
658 – 12" (304.8 mm) long
658 – 11 lbs. (5 kg)
659 – 22" (558.8 mm) long
659 – 17 lbs. (7.7 kg)
• Installed up through the bottom of the tray for easy removal after
the cable is installed.
• Individual rollers keep rolling with each cable even after several cables
have been installed in the tray.
• Steel ball bearing rollers for long life and less friction.
• Steel welded frame.
• Adjustment slots and universal mounting brackets.
3-3/8"
5-5/8"
Tel: 800.435.0786
Fax: 800.524.2853
Description
Cable Tray Rollers
3-3/8"
USA
UPC No.
Size
Weight
Straight Cable Rollers
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
SPECIFICATIONS
A
164
• Steel frame easily attaches to cable tray up to 2" (50.8 mm) thick.
• Helps roll and guide tray pulls.
• Make tray pulls easier.
• 5" (127 mm) wide aluminum alloy sheaves with self lubricating bearings.
Cat. No.
UPC No.
Description
28170
28170
J-Hook
Cat. No.
UPC No.
Dimension A
2018S
2024S
2030S
2036S
27383
27384
27386
27387
6-5/16" (160.3 mm)
12-1/2" (317.5 mm)
18-11/16" (474.7 mm)
24-7/8" (631.8 mm)
Specifications
Weight 2018S – 8 lbs. (3.6 kg)
2024S – 10 lbs. (4.5 kg)
2030S – 13 lbs. (5.9 kg)
2036S – 15 lbs. (6.8 kg)
20249R – 41 lbs. (18.6 kg)
2018R – 11 lbs. (5 kg)
2024R – 12 lbs. (5.4 kg)
2030R – 13 lbs. (5.9 kg)
2036R – 14 lbs. (6.3 kg)
20369R – 53 lbs. (24 kg)
Cat. No. UPS No. Description
2024s
2018R
20249R
Straight Cable Rollers
2018S
27383
Straight Cable Roller for 12" - 18" (304.8 - 457.2 mm) wide tray
2024S
27384
Straight Cable Roller for 20" - 24" (508 - 609.6 mm) wide tray
2030S
27386
Straight Cable Roller for 24" - 30" (609.6 - 762 mm) wide tray
2036S
27387
Straight Cable Roller for 30" - 36" (762 - 914.4 mm) wide tray
Radius Cable Rollers
2018R
27388
Radius Cable Roller for 12" - 18" (304.8 - 457.2 mm) wide tray
2024R
27389
Radius Cable Roller for 20" - 24" (508 - 609.6 mm) wide tray
2030R
27390
Radius Cable Roller for 24" - 30" (609.6 - 762 mm) wide tray
2036R
27391
Radius Cable Roller for 30" - 36" (762 - 914.4 mm) wide tray
RIGHT ANGLE CABLE ROLLERS
20249R 27392
Right Angle Rollers 24" (609.6 mm) radius 90°
20369R 27393
Right Angle Rollers 36" (914.4 mm) radius 90°
www.greenlee.com
Haines Cable Tray Rollers
Cat. NO.
31931
Description Size
Haines Roller
7" (177.8 mm) wide
6" (152.4 mm) dia.
31925
31925
Expandable
Roller Half
31926
31927
31926
Coupling
3-1/2" (88.9 mm) dia.
3" (76.2 mm) long
31927
Mounting Clip
Steel Conduit
31930
31930
Spindle (includes 1-1/2" Rigid Conduit
End Caps)
x 40" (1016 mm) long
31929
31929
End Cap
Used to make 8" (203.2 mm)
to 48" (1219.2 mm) wide roller
Cable Pulling
• Highly economical system of 1-1/2" steel conduit spindles,
high-impact ABS plastic rollers and simple clips.
• Rollers snap in and out of clips fast and easy.
• Mounting clips fit onto the top of most I-Beam and C-Channel
trays, so existing wire is not disturbed.
• 8" (203.2 mm) to 48" (1219.2 mm) wide rollers are available,
using expandable roller halves and 3" (76.2 mm) PVC conduit.
• Use Greenlee Cable-Cream™ (see p. 172) to lube spindle and
roller. This lubricant is compatible with all cable insulation types.
UPC No.
31931
Use with 1-1/2" Rigid
Fits 1-1/2" Rigid Conduit
Rope Stands
• Use to organize and rewind rope.
• Welded steel with washer and spring clip to hold rope reel on stand.
✓
✓
✓
✓
rope stand model
405
406
644
654
weight
5.2 lbs (2.4 kg)
7.8 lbs (3.5 kg)
11 lbs (5 kg)
32.1 lbs (14.6 kg)
spindle diameter
1.50" (38 mm)
0.62" (16 mm)
1.50" (38 mm)
1.90" (48 mm)
maximum reel diameter
10"
13'
17"
24"
maximum reel width
6"
9"
16"
19"
165
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Specifications
Tel: +1.815.397.7070
Fax: +1.815.397.9247
See page 166
for rope
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
405
7/8"
22.2 mm
USA
654
3/4"
19.1 mm
Tel: 800.435.0786
Fax: 800.451.2632
Rope Diameter
Rope Stand
UPC 3/16" 1/4" 3/8" 1/2" 9/16" 5/8"
Rope Length
NO. 4.8 mm 6.4 mm 9.5 mm 12.7 mm 14.3 mm 15.9 mm
405 Rope Stand
21546
250' (76 m) Rope
✓
✓
600' (182 m) Rope
✓
406 Rope Stand
21550
300' (91 m) Rope
✓
✓
600' (182 m) Rope
✓
1,000' (305 m) Rope
✓
✓
3,000' (914 m)
Conduit Measuring Tape
✓
✓
✓
Measuring Tape Cat./UPC No.
39243 39244 39245
644 Rope Stand
15316
300' (91 m)
✓
✓
600' (182 m)
✓
✓
✓
✓
1,200' (365 m)
✓
654 Rope Stand
34362
300' (91 m)
600' (182 m)
MADE FOR THE TRADE!™
Double-Braided Composite Rope for Cable Pullers
Cable Pulling
• Double-braided inner core with an extra double-braided outer jacket for
added strength and less stretch; white with green tracer.
• Rot and mildew resistant.
• Factory spliced eyes at both ends.
• Lowest stretch.
• Select a rope with a maximum rated capacity that meets or exceeds the
cable puller’s maximum pulling force.
Rope Diameter Rope Length cat. No. upc no.
FOR THE 805 PULLER
300' 91 m
450
23773
600' 182 m
451
23775
(9.5 mm)
1,200' 365 m
452
23776
FOR THE UT2 PULLER
300' 91 m
455
23774
600' 182 m
456
23777
(12.7 mm)
Maximum Rated Average
Capacity
Breaking Strength
Weight Rope
lbs. kg Stand
3/8"
1200 lbs. 3.6 kN
1200 lbs. 3.6 kN
1200 lbs. 3.6 kN
3700 lbs.
3700 lbs.
3700 lbs.
14.3
31.0
60.0
6.5
14.3
27.2
406
644
644
1/2"
2,200 lbs. 8.9 kN
2,200 lbs. 8.9 kN
10,000 lbs. 44.4 kN
10,000 lbs. 44.4 kN
34
75
15.4
34
644
644
FOR THE UT4 & 640 PULLER 300'
600'
1,200'
(14.3 mm)
FOR THE 6001 & 6501 (UT5) PULLER
300'
600'
(19.1 mm)
1,200'
FOR THE 6800 (UT8) PULLER
300'
600'
(22.2 mm)
1,200'
91 m
182 m
365 m
35283
35284
35285
35283
35284
35285
4,000 lbs. 17.8 kN
4,000 lbs. 17.8 kN
4,000 lbs. 17.8 kN
16,000 lbs. 71.1 kN
16,000 lbs. 71.1 kN
16,000 lbs. 71.1 kN
28
63
130
12.7
28.6
59
644
644
†
3/4"
91 m
182 m
365 m
35098
35100
35101
35098
35100
35101
6,500 lbs. 28.9 kN
6,500 lbs. 28.9 kN
6,500 lbs. 28.9 kN
26,000 lbs. 115.6 kN
26,000 lbs. 115.6 kN
26,000 lbs. 115.6 kN
58
113
230
26.3
51.3
104.3
644
654
†
7/8"
91 m
182 m
365 m
34136
34137
34138
34136
34137
34138
8,000 lbs. 35.6 kN
8,000 lbs. 35.6 kN
8,000 lbs. 35.6 kN
32,000 lbs. 142.3 kN
32,000 lbs. 142.3 kN
32,000 lbs. 142.3 kN
90
178
359
40.8
80.7
163.3
654
654
†
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
9/16"
166
16.4 kN
16.4 kN
16.4 kN
† This rope does not fit on a rope stand. Use reel jacks and a spindle to dispense. See pages 424-425
www.greenlee.com
CABLE PULLING LUBRICANTS
Cable Pulling Lubricant Selection Guide
Clear Lube™
Cable-Cream®
Cable-Gel®
Winter-Gel™
Electrical or
datacom use.
Clear and colorless
for easy cleanup.
Electrical use.
Heavy Duty
lubricant adheres
well to cable
without messy
dripping.
Electrical or
datacom use.
Cleans up quickly,
non-staining.
Can be applied by
hand or pump.
Electrical or
datacom use.
Will not freeze
until 25°F. Can be
applied by hand
or pump.
Application Temperature Range (°F)
Application Temperature Range (°C)
Minimum Storage Temperature
Base
Average Coefficient of Friction*
Color
COMPATIBILITY (Cable Type)
Rubber
Neoprene
Nylon
PVC
High-density or cross linked polyethylene
Low-density polyethylene
Semiconducting jacket
Hypalon
20°F - 190°F
-6°C - 88°C
30° F/-1 C
Polymer
0.26
Clear
20°F - 190°F
-6°C - 88°C
30° F/-1 C
Polymer
0.18
Blue/Green
-25°F - 190°F
-31°C - 88°C
-25° F/-31 C
Polymer
0.21
Blue
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
20°F - 190°F
-6°C - 88°C
30° F/-1 C
Wax
0.11
Yellow
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Cable Pulling
Application
Tel: 800.435.0786
Fax: 800.451.2632
Cable Lubricant Quantity Chart
The following equation is a general guideline to determine the amount of cable lubricant
to use for an average cable pull.
Q = 0.0015 X L x D
Pull Length
200'
300'
400'
600'
800'
1000'
= new product
= Replacement Part
1"
0.3 gal.
0.5 gal.
0.6 gal.
0.9 gal.
1.2 gal.
1.5 gal.
= Accessory
2"
0.6 gal.
0.9 gal.
1.2 gal.
1.8 gal.
2.4 gal.
3.0 gal.
3"
0.9 gal.
1.4 gal.
1.8 gal.
2.7 gal.
3.6 gal.
4.5 gal.
4"
1.2 gal.
1.8 gal.
2.4 gal.
3.6 gal.
4.8 gal.
6.0 gal.
167
INTERNATIONAL
SPECIFICATIONS
Tel: +1.815.397.7070
Fax: +1.815.397.9247
If the following situations apply, consider using additional lubricant:
• The cable jacket is hard and/or cable is very stiff.
• The conduit is rough or dirty.
• There are many bends to pull through.
• The percentage of conduit filled by the cable is unusually high.
• The conduit is water filled.
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Where:
Q = Quantity of cable lubricant to use in gallons
L = Length of cable pull in feet
D = Diameter of conduit or duct in inches
USA
*(IEEE 375-2 test procedure) kinetic coefficient of friction tested at 300 lb/ft sidewall bearing pressure
MADE FOR THE TRADE!™
Cable-Cream® Cable Pulling Lubricant
• Advanced formula, light yellow cream makes pulling faster and easier.
• Compatible with all cable insulation types.
• Dries slowly to a thin, non-conductive, non-hardening residue.
• Adheres well to the cable without messy dripping. Reduces waste.
• Cleans up easily. Non-staining.
• Won’t break down or separate after exposure to freezing cold or
blistering heat.
• Environmentally safe/non-hazardous.
Cable Pulling
LISTED
SPECIFICATIONS
Weight
CRM-Q - 2.3 lbs. (1 kg)
CRM-5 - 42 lbs. (19.1 kg)
CRM-1 - 9.5 lbs. (4.3 kg)
30,000 - 45,000 CPS
7.0 - 8.0
0.11
Viscosity
PH Range
Average COF
INTERNATIONAL
CANADA
Viscosity
PH Range
Average COF
GEL-Q - 2.3 lbs. (1 kg)
GEL-1 - 8.5 lbs. (3.9 kg)
GEL-5 - 45 lbs. (20.4 kg)
GEL-55 - 498 lbs. (225.9 kg)
8,000 - 12,000 CPS
7.0 - 8.0
0.18
CRM-Q
CRM-1
CRM-5
35207
35208
35209
Cable-Cream One Quart Squeeze Bottle (.95 l)
Cable-Cream One Gallon (3.79 l)
Cable-Cream 5 Gallons (18.93 l)
Cat. No.
UPC No.
Description
GEL-Q
GEL-1
GEL-5
35211
35212
35213
Cable-Gel One Quart Squeeze Bottle (.95 l)
Cable-Gel One Gallon (3.79 l)
Cable-Gel 5 Gallons (18.93 l)
Winter-Gel™ Cable Pulling Lubricant
• Winter-Gel will not freeze until -25° F (-31° C).
• Reduces friction for easy pulling.
• Compatible with all cable insulation types.
• Cleans up quickly and easily.
• High lubricity.
• Can be used all year long.
• Environmentally safe.
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Weight
USA
Description
• Polymer-based, no silicon lubricant offers lower friction and easier pulling.
• Compatible with all cable insulation types.
• Cleans up quickly. Non-staining.
• Higher lubricity than competitive products.
• Will not cement itself to the pipe.
• Dries slowly.
• Can be applied by hand or pump.
• Will not break down or separate after exposure to heat or cold.
• Environmentally safe/non-hazardous.
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.451.2632
UPC No.
Cable-Gel® Cable Pulling Lubricant
LISTED
168
Cat. No.
SPECIFICATIONS
Weight
Viscosity
PH Range
Average COF
WGEL-Q - 2.3 lbs. (1 kg)
WGEL-1 - 9 lbs. (4.1 kg)
WGEL-5 - 44 lbs. (20 kg)
10,000 - 14,000 CPS
7.0 - 8.0
0.21
Cat. No.
UPC No.
Description
WGEL-Q
WGEL-1
WGEL-5
35215
35216
35217
Winter-Gel Pulling Lube One Quart Squeeze Bottle (.95 l)
Winter-Gel Pulling Lube One Gallon (3.79 l)
Winter-Gel Pulling Lube 5 Gallons (18.93 l)
www.greenlee.com
Clear Lube™
• Designed for use within electrical or datacom cable pulls.
• Clear and colorless for quick, easy clean-up.
• Environmentally safe, non-hazardous, non-toxic and non-corrosive.
• Easy to apply either by hand, brush or pump.
• Polymer base with no silicon additives.
• Three-year shelf life with no deterioration in lubricant.
LISTED
UPC No.
Description
CLR-Q
CLR-1
CLR-5
10437
10438
10439
Clear Lube pulling lubricant, 1 quart (.95 l)
Clear Lube pulling lubricant, 1 gallon (3.79 l)
Clear Lube pulling lubricant, 5 gallon (18.93 l)
SPECIFICATIONS
Weight
Viscosity
PH Range
Average COF
CLR-Q - 2.3 lbs. (1.0 kg)
CLR-1 - 7.6 lbs. (3.5 kg)
CLR-5 - 44.8 lbs. (20.4 kg)
10,000 - 20,000 CPS
6.0 - 8.0
0.26
Cable Pulling
Cat. No.
SWABS, BRUSHES, MANDRELS & SWIVELS
Lube Spreader Swab
• Spreads a coat of wire lubricant in duct before installation of cable.
• Cleans mud, dirt, and light debris from duct before pulling.
• Tapered shape permits bi-directional use.
• Will not damage inner walls of duct.
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Replacement Part
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
169
= new product
USA
UPC No.
16854
16856
16857
16858
16859
17370
17571
Maximum
Maximum Rated
Duct Size
Disk Size
Capacity
Weight
inCH mm inCH mm lbs. kN lbs. kg
2
50.8 1.75
44.5 4800 21.3
.5
.23
2.5
63.5 2.25
57.2 4800 21.3
.6
.27
3
76.2 2.75
69.9 4800 21.3 1.5
.68
3.5
88.9 3.25
82.6 4800 21.3 2.0
.91
4
102
3.75
95.3 4800 21.3 2.5 1.13
5
127
4.75 120.7 4800 21.3 3.5 1.59
6
152
5.75 146.1 4800 21.3 4.0 1.81
Tel: 800.435.0786
Fax: 800.451.2632
cat. no.
16854
16856
16857
16858
16859
17370
17571
MADE FOR THE TRADE!™
Wire Duct Brush
Cable Pulling
• Flat steel bristles for maximum cleaning of sand, grit and light
obstructions from duct.
• Pulling eye on one end and smaller twisted eye on the other end
for tailing line allows bi-directional use.
• Can be pulled to loosen dried material before using mandrels
or spreader swabs.
cat. no.
39274
39276
39278
39280
39282
39284
39286
Flexible Mandrel
UPC No.
39274
39276
39278
39280
39282
39284
39286
Maximum
minimum Rated
Duct Size
Diameter
Capacity
inCH mm inCH mm lbs. kN
2
50.8 1.87 47.5 200 .89
2.5
63.5 2.38 60.5 200 .89
3
76.2 2.87 72.9 200 .89
3.5
88.9 3.38 85.9 200 .89
4
102
3.87 98.3 200 .89
5
127
4.87 123.7 200 .89
6
152
5.87 149.1 200 .89
Weight
lbs. kg
.83 .38
.83 .38
.83 .38
.90 .41
.95 .43
1.15 .52
1.28 .58
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Useful for cleaning out mud, dirt, and light obstacles from ducts before
installation of cable.
• Can be used around tight bends due to convex contacts between disks.
• Tapered profile allows pulling in either direction. Pulling eyes on both ends.
• Polyurethane disks do not damage inner walls of duct.
170
cat. no.
39265
39263
39261
39259
39257
39255
39288
UPC No.
39265
39263
39261
39259
39257
39255
39288
Maximum
maximum Rated
Duct Size disk size
Capacity
Weight
inCH mm inCH mm lbs. kN lbs. kg
2
50.8 1.88
47.7 2330 10.3 1
.45
2.5
63.5 2.19
55.6 2330 10.3 1
.45
3
76.2 2.81
71.4 2330 10.3 1.5
.68
3.5
88.9 3.25
82.5 4800 21.3 3.5 1.59
4
102
3.75
95.3 4800 21.3 4.5 2.04
5
127
4.69 119.1 4800 21.3 6
2.72
6
152
5.81 147.5 4800 21.3 8.5 3.85
Rope-to-Swivel Connectors
• Rope-to-swivel connectors connect the cable pulling rope,
up to 1" (254 mm) in diameter, to the pulling swivel.
• Makes connecting the pulling rope and the pulling swivel easier.
• Connectors feature a removable sheave for rope eye.
• Select the connector with a maximum rated capacity that meets
or exceeds the cable puller’s maximum pulling force.
Max. Rated.
Max. Rated
Capacity
Capacity
in Conduit Overhead
Diameter Length
lbs. kN
lbs. kN
in. mm
in. mm
CAT. No.
UPC No.
39905
39905
5,000 22.2
3,000 13.3
2
50.8
4-11/16 119
7/16 11.12
39904
39904
7,000 31.1
4,200 18.6
2
50.8
4-11/16 119
1/2
12.7
1/2
12.7
39108
39903
39903
10,000 44.4
6,000 26.6
2
50.8
4-11/16 119
9/16
14.3
5/8
15.9
39109
39902
39902
10,000 44.4
6,000 26.6
2
50.8
4-11/16 119
11/16 17.5
11/16 17.5
39110
Cat. No.
UPC No.
Description
39849
39850
39849
39850
Sheave
Sheave Pin
“E”
“F”
Use on
in.
mm
in. mm Swivel
13/32 10.32
39107
"E"
“E”
"F"
“F”
www.greenlee.com
Swivels
• Helps eliminate winding and tangling of rope and cable during pull.
• Connects grip and pulling rope.
• All stainless steel body construction.
• Efficient thrust and roller bearing construction allows smooth rotation,
even under full load.
• Clevis pins are “shoulder bolt” style, so load on both sides of clevis
is taken on the shoulder, not on the thread.
• Select the swivel with a maximum rated capacity that meets or exceeds
the cable puller’s maximum pulling force.
39106
39107
39108
39109
39110
39111
b
a
diameter
Inch mm
39106 2,250 11.1
39107 5,000 22.2
39108 7,000 31.1
39109 10,000 44.4
39110 15,000 66.7
39111 25,000 111.2
7/8
1-1/4
1-3/8
1-5/8
2
2-3/8
22.2
31.8
34.9
41.3
50.8
60.3
Inch
c
mm
2-5/8
66.7
3-1/16
77.8
3-9/32
83.3
3-15/16 100
4-11/16 119.1
5-11/16 144.5
d
Inch
mm
Inch
3-1/2
4-1/8
4-17/32
5-7/16
6-9/16
8-7/16
88.9
104.5
115.1
138.1
166.7
214.3
7/16
17/32
5/8
3/4
15/16
1-3/16
f
diameter
mm Inch mm Inch mm
g
e
11.1
13.5
15.9
19.1
23.8
30.2
3/8
1/2
9/16
5/8
3/4
1
9.5
12.7
14.3
15.9
19.1
25.4
5/16
13/32
1/2
5/8
11/16
7/8
7.9
10.3
12.7
15.9
17.5
22.2
Inch
31/32
1-9/32
1-3/8
1-23/32
2
2-25/32
weight replacement *
pin kit
mm lbs. kg
UPC No.
24.6
32.5
34.9
43.7
50.8
70.6
.4 .16
1.0 .45
1.0 .45
2.0 .91
4.0 1.81
7.0 3.18
39112
39113
39114
39115
39116
39117
Breaking
Color
Point kN
Code
0.9 kN
WHITE
1.8 kN
YELLOW
2.7 kN ORANGE
3.0 kN
BLACK
0.9 kN
WHITE
1.8 kN
YELLOW
2.7 kN ORANGE
3.6 kN
GREY
4.4 kN
RED
Use
With
Cable Pulling
cat. no. uPC No.
maximum
rated
capacity
Lbs.
kN
* Replacement Pin Kits contain two (2) Replacement Pins
Breakaway Swivels
BREAKAWAY PIN KITS
D
E
B
39298
7/8” Swivel
BREAKAWAY SWIVEL BODY ONLY
A
B
C
D
E
F
cat. no. UPC No. Inch mm Inch
mm Inch mm Inch mm Inch mm Inch mm
39290
39290
5/8 15.9 3-7/32 81.8 9/32 7.1 2-23/32 69.1 7/16 11.1 1/4
6.4
39298
39298
7/8 22.2 4-7/32 107.2 3/8 9.5 3-11/32 84.9 17/32 13.5 5/16 7.9
• Pins sold in bags of 10 only. • Breakaway values are ±15%.
For forged eye grips
For forged eye grips
For flexible eye grips
Cat. No.
UPC No.
Description
578
579
678
31910
31905
19524
Rope Clevis
Rope Clevis
Rope Clevis
SPECIFICATIONS
678
= new product
= Replacement Part
Maximum Rated Capacity
578 – 6,500 lbs. (28.9 kN)
579 – 10,000 lbs. (44.4 kN)
678 – 6,500 lbs. (28.9 kN)
= Accessory
Weight Length
0.9 lbs. (408 g)
3.0" (76 mm)
1.3 lbs. (589 g)
3.5" (89 mm)
1.3 lbs. (589 g)
3.5" (89 mm)
Width Inside Diameter
1.406" (36 mm)
1.25" (32 mm)
1.84" (47 mm)
1.5" (38 mm)
1.75" (44 mm)
0.94" (24 mm)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
579
578
171
INTERNATIONAL
• Removable bolt and rope sheave.
• Removable grip eye bolt.
• Select the clevis with a rating that meets or exceeds the cable puller’s
maximum pulling force.
• Removable sheave for rope eye.
CANADA
Rope Clevis
39290
5/8” Swivel
Tel: 800.435.0786
Fax: 800.524.2853
• Acts as a mechanical fuse, breaking away
at a preset load to prevent damage to
expensive cable.
• Breakaway pins can be replaced to change
breakaway values.
Breaking
Point lbs.
200 lbs.
400 lbs.
600 lbs.
675 lbs.
200 lbs.
400 lbs.
600 lbs.
800 lbs.
1000 lbs.
USA
F
A
UPC No.
39294
39295
39296
39297
39302
39303
39304
39306
39308
Tel: 800.435.0786
Fax: 800.451.2632
C
cat. no.
39294
39295
39296
39297
39302
39303
39304
39306
39308
MADE FOR THE TRADE!™
GRIPS
Set Screw Clamp Pulling Grips
• Use to pull in 2" (50.8 mm) or larger conduit.
• Type of pulls: heavy, long runs. (629)
• Type of pull: light and medium. (504)
• Type of grip: Flexible eye 1/4" (6.4 mm-629) (6.3 mm-504) diameter
galvanized steel aircraft cable connected to 2 cable receptacles with 5/8"
(15.9 mm) diameter opening and 2 clamping set screws.
• Select pulling grips with a maximum-rated capacity that meets or exceeds
the cable puller’s maximum pulling force.
• Minimum cable diameter is 3/8".
Cable Pulling
624L
624S
Cat. No.
UPC No.
Description
504
629
23665
31855
624
624S
624L
51208
52352
31908
31866
31867
51208
52352
Set Screw Clamp-Type Pulling Grip
Pulling Grip with Clevis includes 624S, 624L and 678 clevis -
4 clamp
Pulling Grip includes 624S and 624L - 2 clamp each
Short Pulling Grip - 2 Clamp
Long Pulling Grip - 2 Clamp
Grip Allen Wrench
Grip Set Screw (2 per clamp), 629 and 624 - 8 for each grip
624L and 624S - 4 for each grip.
504
SPECIFICATIONS
Each grip has two opposed set screws that provide positive locking. Openings in wire
grip should be 50% filled with wire to assure slip-proof grip.
Maximum Rated Capacity
504 – 6,500 lbs. (28.9 kN)
629 – 6,500 lbs. (28.9 kN)
624 – 6,500 lbs. (28.9 kN)
624S – 3,250 lbs. (14.5 kN)
624L – 3,250 lbs. (14.5 kN)
Weight
504 – 5 lbs. (2.3 kg)
629 – 5 lbs. (2.3 kg)
624 – 3.5 lbs. (1.5 kg)
624S – 2 lbs. (.9 kg)
624L – 2.1 lbs. (1 kg)
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Specifications
172
Capacity
Weight
Size
1,750 lbs. (7.7 kN)
1.2 lbs. (.5 kg)
Receptacle - 5/8" (15.9 mm)
Cable Preparation Instructions for Set Screw Clamp-Type Pulling Grips
Strip cable approximately 3" (76 mm) of insulation off the end of the cable
to be pulled. NOTE: The grip head should not be more than 60% filled nor
less than 40% filled to assure that the set screw does not project above the
surface of the grip body when the set screws are tightened down.
The central core should be clipped away and the outer strands used in the
grip head.
Using the Allen Wrench provided, back out the set screws far enough to
accommodate the stripped cables.
Insert the bare wire strands into the grip head as far as they will go.
Tighten both set screws in each grip securely against the conductors.
CAUTION: If the set screws extend above the surface of the gripping head,
damage to the conduit could result. To prevent this,
wrap the head with electrical tape.
www.greenlee.com
Pulling Grip Selection Guide
How to select correct pulling grip:
1. Select the type of grip needed.
2. Select the size of grip needed (see below).
3. Select a grip with maximum rated capacity that meets or exceeds the cable puller’s maximum pulling force.
1. Select the type of grip needed.
GRIP TYPE
SIZE RANGE
MAX. RATED
DIA. INCHES CAPACITY – lbs.
(mm)
(kN)
USE TO PULL
TYPE
OF EYE
DESCRIPTION
.19-1.24
(4.8-31.5)
708
(3.5)
In conduit or tray – Building wire by hand.
Light Duty Grips Single weave galvanized steel mesh
Flexible
.50-3.99
(12.7-101.3)
2940
(13.1)
In conduit or tray – Light-duty
applications, short easy runs.
T-Type Grips
Double weave galvanized steel mesh
Flexible
.50-3.99
(12.7-101.3)
6200
(27.6)
In conduit or tray – Medium-duty
applications
K-Type Grips
Double weave galvanized steel mesh
Rotating forged
.50-6.99
(12.7-177.5)
9600
(42.7)
In conduit or tray – Heavy-duty
applications, long hard runs.
Multiple Strength
Grips
Triple to double to single weave
Rotating forged
galvanized steel mesh
.25-3.99
(6.4-101.3)
9600 Overhead transmission lines – Bare or
(42.7)
insulated conductors, wire rope.
Slack Grips
Rod Closing
Double weave galvanized steel mesh Flexible
– rod closing – offset eye
.50-3.99
(12.7-101.3)
2400
(10.7)
2. Select the size of grip needed.
After determining the type of grip needed, measure the diameter of the cable
being pulled. If pulling more than one cable “of the same diameter,” refer to
chart below for required grip diameter range. If pulling more than one cable
“of different diameters,” bundle cables together, measure the circumference
Where end of conductor is not available.
Can be pulled straight only, rod will not flex.
Cable Pulling
Junior Grips
Single weave galvanized steel mesh
Flexible
and refer to the chart on bottom of this page for required grip diameter range.
Once the cable diameter or required grip diameter is determined, refer to
individual chart for type of grip chosen to locate Catalog/UPC number.
CABLES WITH THE SAME DIAMETER IN ONE GRIP*
2 CABLES
Dia. each
in./(mm)
3 CABLES
Dia. each
in./(mm)
4 CABLES
Dia. each
in./(mm)
5 CABLES
Dia. each
in./(mm)
6 & 7 CABLES
Dia. each
in./(mm)
8 CABLES
Dia. each
in./(mm)
9 CABLES
Dia. each
in./(mm)
Required
Grip Diameter
in./(mm)
.25-.31/(6.4-7.9)
.22-.27/(5.6-6.9)
.19-.24 /(4.8-6.1)
.17-.22/(4.3-5.6)
.15-.19/(3.8-6.1)
.14-.18/(3.6-4.6)
.50-.61/(12.7-15.5)
.31-.36/(7.9-9.1)
.27-.31/(6.9-7.9)
.24-.29/(6.1-7.4)
.22-.26/(5.6-6.6)
.19-.23/(6.1-5.8)
.18-.21/(4.6-5.3)
.62-.74/(15.7-18.8)
.44-.59/(11.2-15.0)
.36-.49/(9.1-12.4)
.31-.42/(7.9-10.7)
.29-.38/(7.4-9.7)
.26-.34/(6.6-8.6)
.23-.31/(5.8-7.9)
.21-.28/(5.3-7.1)
.75-.99/(19.1-25.1)
.59-.75/(15.0-19.1)
.49-.63/(12.4-16.0)
.42-.54/(10.7-13.7)
.38-.48/(9.7-12.2)
.34-.43/(8.6-10.9)
.31-.39/(7.9-9.9)
.28-.35/(7.1-8.9)
1.00-1.24/(25.4-31.5)
.63-.76/(16.0-19.3)
.54-.65/(13.7-16.5)
.48-.58/(12.2-14.7)
.43-.52/(10.9-13.2)
.39-.46/(9.9-11.7)
.35-.42/(8.9-10.7)
1.25-1.49/(31.8-37.8)
.76-.89/(19.3-22.6)
.65-.77/(16.5-19.6)
.58-.67/(14.7-17.0)
.52-.60/(13.2-15.2)
.46-.54/(11.7-13.7)
.42-.49/(10.7-12.4)
1.50-1.74/(38.1-44.2)
1.07-1.22/(27.2-31.0)
.89-1.02/(22.6-25.9)
.77-.88/(19.6-22.4)
.67-.77/(17.0-19.6)
.60-.69/(15.2-17.5)
.54-.62/(13.7-15.7)
.49-.56/(12.4-14.2)
1.75-1.99/(44.5-50.5)
1.22-1.53/(31.0-39.9)
1.02-1.28/(25.9-32.5)
.88-1.10/(22.4-27.9)
.77-.96/(19.6-24.2)
.69-.86/(17.5-21.8)
.62-.77/(15.7-19.6)
.56-.71/(14.2-18.00)
2.00-2.49/(50.8-63.2)
1.53-1.83 / (38.9-46.5)
1.28-1.53/(32.5-38.9)
1.10-1.32/(27.9-33.5)
.96-1.16/(24.2-29.5)
.86-1.03/(21.8-26.2)
.77-.93/(19.6-23.6)
.71-.85/(18.0-21.6)
2.50-2.99/(63.5-75.9)
1.32-1.54/(33.5-39.1)
1.16-1.35/(29.5-34.3)
1.03-1.20/(26.2-30.5)
.93-1.08/(23.6-27.4)
.85-.99/(21.6-25.1)
3.00-3.49/(76.2-88.6)
1.79-2.05/(45.5-52.0)
1.54-1.76/(39.1-44.7)
1.35-1.54/(34.3-39.1)
1.20-1.37/(30.5-34.8) 1.08-1.24/(27.4-31.5)
.99-1.13/(25.1-28.7)
3.50-3.99/(88.9-101.3)
2.44-2.75/(62.0-69.9)
2.05-2.30/(52.0-58.4)
1.76-1.98/(44.7-50.3)
1.54-1.74/(39.1-44.2)
1.37-1.55/(34.8-39.4) 1.24-1.39/(31.5-35.3) 1.13-1.27/(28.7-32.3)
4.00-4.49/(101.6-114.0)
2.75-3.06/(69.9-77.7)
2.30-2.56/(58.4-65.0)
1.98-2.20/(50.3-55.9)
1.74-1.93/(44.2-49.0)
1.55-1.72/(39.4-43.7) 1.39-1.55/(35.3-39.4) 1.27-1.41/(32.3-35.8)
4.50-4.99/(114.3-126.7)
* Split grips require the next larger size.
Measure the circumference of the wire bundle
1.57- 1.95
39.9- 49.5
.50- .61
12.7- 15.5
1.95- 2.36
49.5- 59.9
.62- .74
15.8- 18.8
2.36- 3.14
59.9- 79.8
.75- .99
19.1- 25.1
3.14- 3.93
79.8- 99.8
1.00-1.24
25.4- 31.5
3.93- 4.71
99.8-119.6
1.25-1.49
31.8- 37.8
4.71- 5.50
119.6-139.7
1.50-1.74
38.1- 44.2
5.50- 6.28
139.7-159.5
1.75-1.99
44.5- 50.5
6.28- 7.85
159.5-199.4
2.00-2.49
50.8- 63.2
7.85- 9.42
199.4-239.3
2.50-2.99
63.5- 75.9
9.42-11.00
239.3-279.4
3.00-3.49
76.2- 88.6
11.00-12.57
279.4-319.3
3.50-3.99
88.9-101.3
12.57-14.14
319.3-359.2
4.00-4.49
101.6-114.0
14.14-15.71
359.2-399.0
4.50-4.99
114.3-126.7
= Replacement Part
= Accessory
mm
NOTE: Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection.
173
INTERNATIONAL
inch
= new product
Circumference Range Required Grip Diameter
mm
inch
Tel: +1.815.397.7070
Fax: +1.815.397.9247
CANADA
1.53-1.79/(38.9-45.5)
Tel: 800.435.0786
Fax: 800.524.2853
1.83-2.14/(46.5-54.4)
2.14-2.44 / (54.4-62.0)
Tel: 800.435.0786
Fax: 800.451.2632
.75-.90/(19.1-22.9)
.90-1.07/(22.9-27.2)
USA
.30-.38/(7.6-9.7)
.38-.44/(9.7-11.2)
MADE FOR THE TRADE!™
Basket-Type Pulling Grip Sets
• Handy set gives you the size range you need.
• Have the correct grip on the job and save time.
Cable Pulling
30758
SPECIFICATIONS
Capacity
Weight
Cat. No.
UPC No.
Description
30758
30758
597
31482
598
31483
599
31484
Building Wire Junior Grip Set - diameter range .25" - 1.24"
(6.4 - 31.5 mm). Consists of 30588, 30590, 30592, and 30594,
30584, 30586.
T-Type Grip Set - diameter range .75" - 1.99" (19 - 50.5 mm).
Consists of 30576, 30578, and 31010.
T-Type Grip Set - diameter range 1.50' - 2.99" (38.1 - 75.9 mm).
Consists of 31010, 30580 and 31012.
T-Type Grip Set - diameter range .75' - 2.99" (19 - 75.9 mm).
Consists of 30576, 30578, 31010, 30580 and 31012.
30758 - (2) #14 to 4-1/0, .25" - 1.24" (6.4 - 31.5 mm) diameter
597 - 3-1/0 to 250 MCM, .75" - 1.99" (1.9 - 50.5 mm) diameter
598 - 3-350 MCM to 3-750 MCM, 1.50" - 2.99" (38.1 - 75.9 mm)
diameter
599 - 3-1/0 to 3-750 MCM, .75" - 2.99" (1.9 - 75.9 mm) diameter
30758 - 1.2 lbs. (.5 kg) 597 - 6 lbs. (2.7 kg)
598 - 9.9 lbs. (4.5 kg) 599 - 13 lbs. (5.9 kg)
Junior Basket-Type Pulling Grips
• Use to pull in: conduit or tray.
• Type of pulls: building wire manually.
• Type of grip: single weave galvanized steel mesh with flexible pulling eye.
• Select the grip with a maximum rated capacity that meets or exceeds
the cable puller’s maximum pulling force.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cable Diameter
Maximum Eye
Mesh
Range Rated Capacity Length Length
174
cat. no.
UPC No.
inch
mm
lbs.
kN
inch
mm
inch
mm
30596
30584
30586
30588
30590
30592
30594
30596
30584
30586
30588
30590
30592
30594
.19 - .24
.25 - .36
.37 - .49
.50 - .61
.62 - .74
.75 - .99
1.00 - 1.24
4.8 - 6.1
6.2 - 9.1
9.2 - 12.6
12.7 - 15.50
15.6 - 18.9
19 - 25.3
25.4 - 31.5
80
90
180
260
390
560
780
.3
.4
.8
1.1
1.7
2.4
3.4
3-1/4
3-1/4
3-3/4
4-1/4
5
5-3/4
6-1/2
82.6
82.6
95.3
108
127
146
165.1
4-1/4
4-1/4
7
8-1/2
10
10
11-1/2
108
108
177.8
215.9
254
254
292.1
Light-Duty Basket-Type Pulling Grips
• Use to pull in: conduit or tray.
• Type of pulls: light-duty, short, easy runs.
• Type of grip: single weave galvanized steel mesh with flexible pulling eye.
• Select the grip with a maximum rated capacity that meets or exceeds
the cable puller’s maximum pulling force.
Cable Diameter
Maximum Eye
Mesh
Range Rated Capacity Length Length
cat. no.
UPC No.
standard
30536
30538
30540
30542
30544
30546
30548
30550
30552
30554
30536
30538
30540
30542
30544
30546
30548
30550
30552
30554
inch
mm
lbs.
kN
inch
mm
inch
mm
.50 - .61
.62 - .74
.75 - .99
1.00 - 1.24
1.25 - 1.49
1.50 - 1.99
2.00 - 2.49
2.50 - 2.99
3.00 - 3.49
3.50 - 3.99
12.7 - 15.5
15.6 - 18.9
19.0 - 25.3
25.4 - 31.5
31.6 - 38
38.1 - 50.7
50.8 - 63.4
63.5 - 76.1
76.2 - 88.8
88.9 - 101.3
560
560
800
1360
1360
1360
1700
2120
2940
2940
2.5
2.5
3.5
6
6
6
7.5
9.4
13
13
5
5
6
7
7
8
9
9
10
10
127
127
152.4
177.8
177.8
203.2
228.6
228.6
254
254
16
16
20
20
21
23
25
27
30
32
406.4
406.4
508
508
533.4
584.2
635
685.8
762
812.8
www.greenlee.com
T-Basket-Type Pulling Grips
• Use to pull in: conduit or tray.
• Type of pulls: medium-duty.
• Type of grip: double weave galvanized steel mesh with flexible pulling eye.
• Select the grip with a maximum rated capacity that meets or exceeds
the cable puller's maximum pulling force.
Cable Diameter
Maximum Eye
Mesh
Range Rated Capacity Length Length
cat. no.
UPC No.
inch
mm
lbs.
kN
inch
mm
inch
mm
sHORT
30558
.50 - .61
12.7 - 15.5
900
4
8
203.2
21
533.4
30560
.62 - .74
15.6 - 18.9
1120
4.9
8
203.2
24
610
30562
30562
.75 - .99
19.0 - 25.3
1360
6
9
228.6
24
610
30564
30564
1.00 - 1.49
25.4 - 38.0
1920
8.7
9
228.6
24
610
30566
30566
1.50 - 1.99
38.1 - 50.7
3280
14.5
11
279.4
24
610
30568
30568
2.00 - 2.49
50.8 - 63.3
3700
16.4
12
304.8
24
610
30570
30570
2.50 - 2.99
63.5 - 76.1
4900
21.7
12
304.8
24
610
30572
30572
3.00 - 3.49
76.2 - 88.8
4900
21.7
14
355.6
24
610
30574
30574
3.50 - 3.99
88.9 - 101.3
6200
27.5
14
355.6
26
660.4
Cable Pulling
30558
30560
STANDARD
30576
30576
.75 - .99
19.0 - 25.3
1360
6
9
228.6
36
914.4
30578
30578
1.00 - 1.49
25.4 - 38.0
1920
8.7
9
228.6
36
914.4
31010
31010
1.50 - 1.99
38.1 - 50.7
3280
14.5
11
279.4
36
914.4
30580
30580
2.00 - 2.49
50.8 - 63.3
3700
16.4
12
304.8
36
914.4
31012
31012
2.50 - 2.99
63.5 - 76.1
4900
21.7
12
304.8
36
914.4
30582
30582
3.00 - 3.49
76.2 - 88.8
4900
21.7
14
355.6
36
914.4
31014
31014
3.50 - 3.99
88.9 - 101.3
6200
27.5
14
355.6
40
1016
K Basket-Type Pulling Grips
mm
lbs.
kN
inch
mm
inch
mm
inch
mm
.50 - .61
12.7 - 15.5
1120
4.9
5
127
16
406.4
7/8
22.2
30998
.62 - .74
15.6 - 18.9
1360
6
5
127
16
406.4
7/8
22.2
30460
30460
.75 - .99
19.0 - 25.3
1920
8.5
6
152.4
32
812.8
1
25.4
31000
31000
1.00 - 1.49
25.4 - 38.0
3280
14.5
7
177.8
33
838.2
1-3/8
34.9
30462
30462
1.50 - 1.99
38.1 - 50.7
3280
14.5
7
177.8
34
863.6
1-3/8
34.9
31002
31002
2.00 - 2.49
50.8 - 63.3
5440
24.1
9
228.6
36
914.4
1-5/8
41.2
30464
30464
2.50 - 2.99
63.5 - 76.1
6600
29.3
10
254
38
965.2
1-7/8
47.6
31004
31004
3.00 - 3.49
76.2 - 88.8
8200
36.5
10
254
39
990.6
1-7/8
47.6
30466
30466
3.50 - 3.99
88.9 - 101.5
9600
42.7
10
254
41
1041.4
1-7/8
47.6
31006
31006
4.00 - 4.49
101.6 - 114.2
9600
42.7
10
254
42
1066.8
1-7/8
47.6
30468
30468
4.50 - 4.99
114.3 - 126
9600
42.7
10
254
58
1473.2
1-7/8
47.6
30470
30470
5.00 - 5.99
127 ‑ 152.3
9600
42.7
10
254
60
1524
1-7/8
47.6
NOTE: Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection.
= new product
= Replacement Part
= Accessory
175
INTERNATIONAL
30442
30998
Tel: +1.815.397.7070
Fax: +1.815.397.9247
30442
CANADA
inch
USA
cat. no. upc no.
standard
Tel: 800.435.0786
Fax: 800.524.2853
Cable Diameter
Maximum Eye
Mesh Rotating
Range Rated Capacity Length Length Eye Dia.
Tel: 800.435.0786
Fax: 800.451.2632
• Use to pull in: conduit or tray.
• Type of pulls: heavy-duty, long, hard runs.
• Type of grip: double-weave galvanized steel mesh with
forged steel swivel eye.
• Select the grip with a maximum rated capacity that meets or exceeds
the cable puller's maximum pulling force.
MADE FOR THE TRADE!™
Multiple Strength Basket-Type Pulling Grips with Rotating Forged Eye
• Use to pull overhead transmission lines, bare or insulated conductors
and wire rope.
• Type of pulls: heavy-duty, long distance.
• Triple, to double, to single weave galvanized steel mesh with
forged steel swivel eye
• Color coded for easy size identification.
• Select the grip with a maximum rated capacity that meets or exceeds
the cable puller’s maximum pulling force.
Cable Pulling
Cable Diameter
Maximum
Range Rated Capacity
cat. no. upc no.
30474
30474
Color Eye
Mesh Rotating
Code Length Length Eye Diameter
inch
mm
lbs.
kN
.25 - .49
12.7 - 15.5
1360
6
inch
mm
inch
Dark Green
5
127
26
660.4
mm
inch
mm
7/8
22.3
30476
30476
.50 - .74
15.6 - 18.9
2000
8.8
Brown
6
152.4
32
812.8
1
25.4
30478
30478
.75 - .99
19.0 - 25.3
2880
12.8
Light Blue
6
152.4
41
1041.4
1
25.4
30480
30480
1.00 - 1.24
25.4 - 31.5
4920
21.8
Gold
8
203.2
52
1320.8
1-3/8
34.9
30482
30482
1.25 - 1.49
31.6 - 38.0
6120
27.2
Black
8
203.2
56
1422.4
1-5/8
41.2
30484
30484
1.50 - 1.74
38.1 - 44.3
6120
27.2
Red
9
228.6
60
1524.0
1-7/8
47.6
30486
30486
1.75 - 2.24
44.4 - 56.9
9600
42.7
Dark Blue
10
254
70
1778.0
1-7/8
47.6
30502
30502
2.00 - 2.49
50.8 - 63.4
9600
42.7
Yellow
10
254
50
1270
1-7/8
47.6
30504
30504
2.50 - 2.99
63.5 - 76.1
9600
42.7
Orange
10
254
52
1320.8
1-7/8
47.6
30506
30506
3.00 - 3.49
76.2 - 88.8
9600
42.7
Aluminum
10
254
54
1371.6
1-7/8
47.6
30508
30508
3.50 - 3.99
88.9 - 101.3
9600
42.7
Light Green
10
254
56
1422.4
1-7/8
47.6
NOTE: Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Split Mesh Rod Closing Basket-Type Slack Pulling Grips
176
• Use to pull when the end of the conductor is not available.
• Type of pulls: light and straight. The rod will not flex around bends.
• Single weave galvanized steel mesh with rod closing and an offset flexible eye.
• Select the grip with a maximum rated capacity that meets or exceeds the
cable puller’s maximum pulling force.
Cable Diameter
Maximum Eye
Mesh
Range Rated Capacity Length Length
cat. no.
UPC No.
inch
mm
lbs.
kN
inch
mm
inch
mm
30658
30658
.50 - .61
12.7 - 15.50
300
1.3
7
177.8
6
152.4
31024
31024
.62 - .74
15.6 - 18.9
360
1.6
7
177.8
8
203.2
30660
30660
.75 - .99
19 - 25.3
440
1.9
7
177.8
10
254
31026
31026
1.00 - 1.24
25.4 - 31.5
680
3
8
203.2
12
304.8
30662
30662
1.25 - 1.49
31.6 - 38.0
900
4
8
203.2
14
355.6
31028
31028
1.50 - 1.74
38.1 - 44.3
1160
5.1
9
228.6
15
381
30664
30664
1.75 - 1.99
44.4 - 50.7
1520
6.7
10
254
16
406.4
31030
31030
2.00 - 2.49
50.8 - 63.4
1800
8
10
254
19
482.6
30666
30666
2.50 - 2.99
63.5 - 76.1
2200
9.7
10
254
20
508
31032
31032
3.00 - 3.49
76.2 - 88.8
2400
10.6
12
304.8
21
533.4
30668
30668
3.50 - 3.99
88.9 -101.3
2400
10.6
12
304.8
24
610
NOTE: Rope is a very critical link in the cable pulling system. See page 166 for proper pulling rope selection.
Wire & Cable Termination
If you need to cut, crimp or strip, Greenlee has the
tool – from manual-style to battery-powered. Use our
cable cutter selection guide and cross-reference
charts to choose the right high-quality, handheld tool that makes your job faster and
easier time after time, cut after cut, crimp
after crimp.
Contents
CCX
Copper & Aluminum Cutting
ACSR, Guy Strand & Steel Cutting
Communications & Underground Power Cable Cutting
Die-Type Crimping
Dieless Crimping
Crimping Dies
Accessories
Crimping Die Cross Reference
Cable Bending Tools
Wire & Cable Stripping Tools
Wire Crimping Tools
Wire Ferrules
Wire Ferrule Crimping Tools
178
181
190
194
197
206
210
213
215
219
220
221
226
229
MADE FOR THE TRADE!™
MADE FOR THE TRADE!™
Feature Legend of Icons
DIELESS
Wire & Cable Termination
IntelliCRIMP™
Technology
18V Lithium-Ion
Battery
Automatic
Retraction
Stop
Retraction
Stop Repeat
LED Work
Light
Battery
LED Monitor
Crimping
Force in
TONS
Crimping Tool
that does not
require die set
CCX
What Is CCX?
The Greenlee CCX three-step, 10-second function changeover.
The easy, quick-release design makes changeovers this simple:
1
Just push the release buttons, and the blades slide right
out of the easy-opening CCX head.
CCX–Exclusive Multipurpose Tools from Greenlee
Get more for your money and carry fewer tools – with CCX. This advanced
line of multipurpose tools is designed to work with a wide variety of
cutting blades and crimping die adapters, and a knockout punch adapter. Buy
just one tool for countless electrical construction and maintenance jobs.
Cut
• Copper, aluminum, copperweld, and ACSR cable
• Guy strand, including EHS
• Threaded rod
• DIN rail
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Crimp – 6-Ton Option
• Greenlee K22 & KA22
• Thomas & Betts 6Ton
• Burndy W
• Blackburn OD
• Kearney O
• Panduit CD2001
• For copper lugs and splices, use Greenlee dies up to 600 kcmil (MCM).
For aluminum lugs & splices, use Greenlee dies up to 350 kcmil (MCM).*
178
2
Alternate die adapters, cutter blades, or knockout punch
adapters slide right in!
Crimp – 12-Ton Option
• Greenlee KC12 & KA12
• Burndy U
• Penn-Union T
• ILSCO ILD
• Thomas & Betts 15500 Series
• Blackburn B & H
• Panduit CD-920
• Huskie HT41
Punch – use the knockout punch adapter with
• Standard Slug-Buster and Slug-Splitter punches
• Non-round punches
3
*UL and cUL classified to 600 kcmil (MCM) with Anderson, Blackburn®, Burndy, ILSCO,
Panduit, Thomas & Betts, and Penn-Union copper color-coded connectors. UL & CUL
classified to 350 kcmil (MCM) with Anderson, Blackburn®, Burndy, ILSCO, Panduit,
Thomas & Betts, and Penn-Union aluminum color-coded connectors.
You’re working again, with no lost time!
E12CCXL & ECCXL Tool Capacities
Crimping
Cutting
Copper Color-Coded Lugs and Splices: 750 kcmil
Aluminum Color-Coded Lugs and Splices: 750 kcmil
5/8" Service Entrance Connectors: 10-1/0 AWG
.840 Service Entrance Connectors: 1/0-4/0 AWG
Aluminum Overhead “H” taps: 6 AWG-500 kcmil
One Piece ACSR Tension Splices: 4 AWG-556.5 kcmil
Two Piece ACSR Tension Splices: 2 AWG-556.5 kcmil
Copper and Aluminum Cable: 1-1/2" (40 mm)
Round: 5-5/8" (144.1 mm) in 10 ga. mild steel
ACSR: 954 kcmil (Cardinal)
Rectangular: 2.677" x 5.433" (68.0 mm x 138.0) mm
Standard Guy Strand: 5/8" (20 mm)
Square: 5.4333" x 5.433" (138.0 mm x 138.0) mm
EHS Guy Strand: 1/2" (13 mm)
Accessories required to punch 4-1/2" through 5-5/8"
Ground Rod: 1/2" (13 mm)
12185 Spacer, 04686 Bushing and 03170 Sleeve
Rebar (schedule 60): 1/2" (13 mm)
Threaded Rod: 1/4", 3/8", 1/2", 4 mm, 5 mm,
6 mm, 8 mm, 10 mm
DIN Rail: 35 x 7.5, 32 x 15 x 9, 35 x 15
Punching
www.greenlee.com
Gator® CCXL Tools
Features
E12CCXL
Wire & Cable Termination
• Intelligent Crimping System Technology includes a pressure sensor that
monitors the crimping force of each crimp and provides the operator a
visual and audible alert if the force is below specifications.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles
per charge and faster cycle times.
• Retraction Stop Repeat (RSR) allows the operator to partially retract the ram
and then the tool repeats the retraction for subsequent crimps.
• LED light provides the operator with the battery charge and tool
maintenance status.
• Two-stage hydraulic system provides fast advance and power speeds,
saving time.
• Forward handle position improves tool balance.
• One trigger controls all tool functions.
• Crimping head rotates 350°
• Tools automatically retract when the crimping or cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger
• Use optional CCX blades and adapters (see page 180
• U.S. Patent #6,206,663, #6,532,790
6-Ton tools
12-Ton tools
cat. no.
upc no.
description
12,000 lb (53 kN)
12-Ton
6-Ton
16-1/2" (419 mm)
15 lbs. (6.8 kg)
18 V, 3.0 Ah, Li-ion
1 hour
16-1/2" (375 mm)
14 lbs. (6.3 kg)
18 V, 3.0 Ah, Li-ion
1 hour
90
300
E12CCXL11
E12CCXL12
E12CCXL22
E12CCXL120
E12CCXL230
ECCXL11
ECCXL12
ECCXL22
ECCXL120
ECCXL230
12274
52176
10122
52178
52179
52180
52037
52038
52039
12856
12857
52040
52041
10134
10139
10140
12274
52176
10122
52178
52179
52180
12-Ton Battery-Powered 12CCX tool, w/120V charger
12-Ton Battery-Powered 12CCX tool, w/12V charger
12-Ton Battery-Powered 12CCX tool, w/230V charger
CCX 12-Ton Tool w/120V AC Adapter
CCX 12-Ton Tool w/230V AC Adapter
6-Ton Battery-Powered CCX tool, w/120V charger
6-Ton Battery-Powered CCX tool, w/12V charger
6-Ton Battery-Powered CCX tool, w/230V charger
CCX 6-Ton Tool w/120V AC Adapter
CCX 6-Ton Tool w/230V AC Adapter
Length
Weight
Battery
Battery Charge
Time
Est. Cycles Per
Charge
Crimping dies on page 210-212.
Carrying Strap
18 V, 3.0 Ah, Li-ion Battery
Carrying Case for E12CCXL & ECCXL
120V Charger
12V Charger
230V Charger
See page 180 for crimping die adapters, cutting blades and knockout punch adapter
= new product
= Replacement Part
= Accessory
179
INTERNATIONAL
ECCXL
24,000 lb. (107 kN)
CANADA
E12CCXL
Crimping Force
Tel: +1.815.397.7070
Fax: +1.815.397.9247
specifications
Tel: 800.435.0786
Fax: 800.524.2853
When used with Greenlee KC12 and KA12 dies in combination with
Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union®
and Thomas & Betts® color-coded connectors, crimps on connections up to
750 kcmil are UL and cUL classified. The tools also accept all industry “U”
type dies. These tools drive knockout punches through 5-5/8" diameter.
USA
ECCXL
Tel: 800.435.0786
Fax: 800.451.2632
When used with Greenlee KC22 and KA22 dies in combination with
Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and
Thomas & Betts® color-coded connectors, connections up to 600 kcmil
(copper) and 350 kcmil (aluminum) are UL and cUL classified. These tools
also accept Greenlee, Burndy®, Kearney®, Blackburn®, Panduit® and Thomas
& Betts® dies used for 6-ton tools. They can drive knockout punches up
through 2" diameter.
MADE FOR THE TRADE!™
CCX Tool Accessories (optional, all in pairs except punch driver)
Wire & Cable Termination
Die Adapters
UA22
Cat. No.
UPC No.
UA22
UAK
07062
07033
UAW
07035
UA12T
20158
Description
Adapter for Greenlee K22 dies
Adapter for Kearney “0”, T&B “6 Ton”,
and Blackburn “OD” dies
Adapter for Burndy “W” and Panduit
“CD-2001” dies (equivalent to “D3” die)
Adapter for “U” dies (included with tool)
ECCXL
E12CCX
✓
✓
✓
✓
Cable cutting blades
Cat. No.
UC26
UC40
UCACSR
UPC No.
06714
07036
07037
Description
Cutter Blades AL & CU 1" capacity
Cutter Blades AL & CU 1-1/2" capacity
Cutter blades for ACSR & guy strand
ECCXL
E12CCX
✓
✓
✓
✓
✓
✓
Threaded rod cutting blades
UAK
Cat. No.
UCUNC14
UCUNC38
UCUNC12
UPC No.
07038
07039
07274
Description
Cutter blades for 1/4" threaded rod
Cutter blades for 3/8" threaded rod
Cutter blades for 1/2" threaded rod
ECCXL E12CCX
✓
✓
✓
✓
✓
✓
UC40
kNOCKOUT PUNCH ADAPTER
Cat. No.
UPC No.
UA12P
11890
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
*U.S. Patent #6,065,326
180
UCUNC38
UA12P
Description
Punch Driver Adapter*
(accepts 3/4" draw stud)
ECCXL E12CCX
✓
✓
www.greenlee.com
COPPER AND ALUMINUM CUTTING
Selection Guide for Copper & Aluminum Cable Cutters
Cable Size
Battery-Powered
Al
E12CCXL,
Cu
ECCXL
ACSR
Al
ES32L
Cu
Al
ES1000
Cu
Al
ES750
Cu
Al
ESG50L
Cu
ESC85L, Al
ESC105
Cu
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
179
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Hydraulic
Al
•
750
Cu
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
o
186
o
•
•
•
•
185/186
o
o
•
o
•
o
186
•
o
•
•
•
o
186
•
•
o
•
•
•
185
o
•
•
•
185
•
o
o
•
•
•
•
o
185
•
•
•
•
o
182
183
183
184
194
Wire & Cable Termination
250
300 350 400 500 600 750 1000 1500 2000
AWG
#8 #6 #4 #2 #1 1/0 2/0 3/0 4/0
kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil kcmil Page
mm2
6 10 16 25 35 40 50 70 95 120
150 150 185 240 300 400
500 800 1000 No.
184
RaTchet
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
o
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
o
•
•
•
•
•
•
•
•
•
•
o
•
•
•
•
•
•
•
•
•
o
o
o
•
•
•
•
•
•
•
•
•
•
•
•
•
•
o
o
•
•
•
•
•
•
o
o
•
•
•
•
o
o
•
•
•
•
•
•
•
•
•
•
o
•
•
•
•
•
•
o
o
•
•
•
•
•
•
•
•
•
•
o
•
•
•
•
•
•
•
•
o
o
Manual
= new product
= Replacement Part
= Accessory
188
187
187
187
187
187
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Note: • = Frequent use capacity o = maximum capacity
•
Tel: 800.435.0786
Fax: 800.524.2853
Al
727,727M
Cu
Al
718, 718F
Cu
Al
718HL
Cu
Al
704
Cu
Al
705
Cu
Al
706
Cu
181
INTERNATIONAL
•
•
CANADA
•
USA
•
•
Tel: 800.435.0786
Fax: 800.451.2632
Al
759
Cu
Al
760, 761
Cu
45206, Al
45206I
Cu
45207, Al
45207I
Cu
Al
773
Cu
Al
774
Cu
Al
756
Cu
MADE FOR THE TRADE!™
Wire & Cable Termination
Gator® ES32L Battery-Powered Cable Cutter
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles
per charge and faster cycle times.
• LED light provides the operator with the battery charge and tool
maintenance status.
• Small size makes the ES32L an excellent tool for use inside panel boxes.
• In line tool style is light weight and very easy to control
• One trigger controls all tool functions.
• Cutting head rotates 350°
• Tools automatically retract when the cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger
SPECIFICATIONS
Capacity
Battery Voltage
Length
Weight
Battery Charge Time
Est. Cycles Per Charge
500 kcmil (240 mm2) Cu or Al cable
18V 1.5 Ah Li-ion
14-5/8" (372 mm)
4.4 lbs. (2.0 kg)
30 minutes
200 (500kcmil cable requires 2 cycles per cut)
Cat. No.
UPC No.
Description
ES32L11
ES32L12
ES32L22
ES32L120
ES32L230
12092
12093
52177
25752
52178
52179
52180
52107
52108
52116
52117
52118
12092
12093
52177
25752
52178
52179
52180
ES32L Battery-Powered Cable Cutter w/120 volt Charger
ES32L Battery-Powered Cable Cutter w/12 volt Charger
ES32L Battery-Powered Cable Cutter w/230 volt Charger
ES32L Cable Cutter w/120V AC Adapter
ES32L Cable Cutter w/ 230V AC Adapter
Movable Blade
Fixed Blade
18V 1.5 Ah Li-ion
Carrying Case
120V Charger
12V Charger
230V Charger
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Designed specifically for cutting fine stranded copper cable
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles
per charge and faster cycle times.
• LED light provides the operator with the battery charge and tool
maintenance status.
• In line tool style is light weight and very easy to control
• One trigger controls all tool functions.
• Cutting head rotates 350°
• Tools automatically retract when the cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Gator® ES32FL Battery-Powered Fine Stranded Copper Cable Cutter
182
SPECIFICATIONS
Capacity
Battery Voltage
Length
Weight
Battery Charge Time
Est. Cycles Per Charge
1-1/4" (32 mm) fine stranded Copper cable
(Not for cutting standard stranded cables)
18V 1.5 Ah Li-ion
14-5/8" (372 mm)
4.4 lbs. (2.0 kg)
Approximately 30 minutes
200 (500kcmil cable requires 2 cycles per cut)
Cat. No.
UPC No.
Description
ES32FL11
ES32FL12
ES32FL22
ES32FL120
ES32FL230
19234
52177
25752
52178
52179
52180
19219
19220
19221
19222
19223
19234
52177
25752
52178
52179
52180
ES32FL Battery-Powered Cable Cutter w/120 V Charger
ES32FL Battery-Powered Cable Cutter w/12 V Charger
ES32FL Battery-Powered Cable Cutter w/230 V Charger
ES32FL Battery-Powered Cable Cutter w/120 V Charger
ES32FL Battery-Powered Cable Cutter w/230 V Charger
Blade Kit
18V 1.5 Ah Li-ion
Carrying Case
120V Charger
12V Charger
230V Charger
www.greenlee.com
Gator® ES1000 Battery-Powered Cable Cutter
Cat. No.
UPC No.
Description
ES100011
ES100022
45378
50017
11856
11841
11856
50013
50015
11851
50017
11856
11841
11856
Battery-powered Cable Cutter, 120 V Charger
Battery-powered Cable Cutter, 230 V Charger
14.4 V NiCd Battery
Blade Set
Carrying Case
120V Charger
230V Charger
SPECIFICATIONS
Capacity
Blade Opening
Length
Weight
Battery
Copper
Aluminum
2-1/8" (54mm)
14-3/4" (375mm)
7.3 lb. (3.3 kg)
14.4 Volt, NiCd
1000 kcmil
1000 kcmil
Wire & Cable Termination
• Compact design permits use in tight locations.
• One hand operation.
• Extra heavy blades for clean cuts and long life.
• Performs approximately 35 cuts in 1000 kcmil copper cable
per battery charge.
• Large 2 1/8" diameter blade opening.
• Easy to switch between forward and reverse direction.
• 14.4 volt battery recharges in one hour.
• Includes two batteries, battery charger, and molded carrying case.
• Choice of 120 volt or 230 volt battery charger.
= Replacement Part
= Accessory
45380
45381
45378
45334
45333
45383
45379
45382
Battery-Powered Cable Cutter, 120 V Charger
Battery-Powered Cable Cutter, 230 V Charger
Extra 12 Volt NiCd Battery
Movable Blade
Fixed Blade
Carrying Case
120V Charger
230V Charger
183
INTERNATIONAL
= new product
ES750-11
ES750-22
45378
45334
45333
45383
45379
45382
CANADA
Length
Weight
Battery
7 50 kcmil (MCM) (400 mm²) copper cable
1000 kcmil (MCM) (500 mm²) aluminum cable
14-1/4" (362 mm)
5.8 lbs. (2.6 kg)
12 Volts NiCd
Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cutting Capacity
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
SPECIFICATIONS
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Cuts 500 kcmil (MCM) copper cable in under 8 seconds.
• Compact design permits use in tight locations.
• Extra-heavy blades for clean cuts and long life.
• Makes approximately 20 cuts in 750 kcmil (MCM) per battery charge.
• Easy to switch between forward and reverse direction.
• 12 volt battery recharges in one hour.
• Includes battery charger, one battery and molded carrying case.
• Not for use on 500 kcmil or larger compact cable.
• Choice of a 120 volt or 230 volt battery charger.
USA
Gator® ES750 Battery-Powered Cable Cutter
MADE FOR THE TRADE!™
INTERNATIONAL
CANADA
• The ESG50L is used for cutting copper and aluminum power cables.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles
per charge and faster cycle times.
• Retraction Stop allows the operator to stop the ram retraction at any point
simply by tapping the trigger, and then starting the next cutting cycle from
that point saving time and energy.
• LED light provides the operator with the battery charge and tool
maintenance status.
• Two-stage hydraulic system provides fast advance and power speeds,
saving time.
• Forward handle position improves tool balance.
• One trigger controls all tool functions.
• Cutting head rotaates 350°
• Tools automatically retract when the cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered cutting tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger
• U.S. Patents #6,206,663 and #6,065,326
specifications
battery powered
cat. no.
upc no.
description
Cutting Capacity
Length
Weight
Height
Battery
Battery Charge Time
Est. Cycles Per Charge
2" (50 mm) diameter Al or Cu cable
15-3/4" (400 mm)
9.8 lbs. (4.4 kg)
13" (330 mm)
18 V, 3.0 Ah, Li-ion
1 hour
300
ESG50L11
ESG50L12
ESG50L22
ESG50L120
ESG50L230
04181
04184
52176
10118
12274
52178
52179
52180
52129
52130
52131
52132
52133
04181
04184
52176
10118
12274
52178
52179
52180
Battery-Powered Cable Cutter, 120 V charger
Battery-Powered Cable Cutter, 12 V charger
Battery-Powered Cable Cutter, 230 V charger
Cable Cutter w/120V AC Adapter
Cable Cutter w/230V AC Adapter
Movable Blade
Fixed Blade
18 V, 3.0 Ah, Li-ion Battery
Carrying Case for ESG50L
Carrying Strap
120V Charger
12V Charger
230V Charger
Hydraulic Cable Cutter
750H767 model with
767 Hand Pump
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Wire & Cable Termination
Gator® Battery-Powered Cable Cutter
184
SPECIFICATIONS
Capacity
Jaw opening
Weight
1000 kcmil (MCM) (500 mm²) copper or aluminum cable
1-15/16" (49 mm)
750 – 25 lbs. (11.3 kg)
750H767 - 29 lbs. (13.2 kg)
750E975 - 84 lbs. (38.1 kg)
• Cuts in 7 seconds. Jaws slide open quickly to save time between cuts.
• 11-ton (97 kN) ram powers cutting jaws. Jaws are specially hardened
and precision-ground to hold sharpness.
• Lightweight and easy to use.
Cat. No.
UPC No.
Description
750
750H767
29149
17450
750E975
34203
751
22279
746C
23955
17459
17451
23955
17459
Hydraulic Cable Cutter & Ram in Storage Box*
Hydraulic Cable Cutter with 767 Hand Pump, Ram,
Hydraulic Hose in Storage Box
Hydraulic Cable Cutter with 975 Electric Pump, Ram,
Hydraulic Hose in Storage Box
Hydraulic Cable Cutter Head for use with Greenlee 746
Hydraulic Ram. Also order 51385 Elbow
Ram Unit
Steel Storage Box
Cutter Blade
* 1/4" Male hydraulic coupler (54169) is needed to connect a 767 pump with hose to the 750 cutter
www.greenlee.com
Heavy-Duty Ratchet Cable Cutters
• Extra thick blades, ground flat to reduce potential for breakage.
• Ratchet action for heavy-duty cutting.
• Two cutting actions – fast scissor cutting for small cable and insulation;
converts automatically to ratchet mode.
• Anti-slip mechanism for positive ratchet action.
• Rubber boot protects ratchet mechanism.
Description
756
34188
Heavy-Duty Ratchet Cable Cutter with rubber boot.
Cutter Head Unit (Includes 2 Blades)
34081
34188
Two-Hand Ratchet Cable Cutter
• Two-handed operation provides more leverage and makes cutting large
cables easier.
• Short fiberglass handles make it easy to use in tight places and to store
in tool boxes.
• Single-speed ratchet mechanism.
• Blade release allows blades to be opened in mid-cut.
• Heavy-duty forged steel blades provide long life.
761
Cat. No.
UPC No.
Description
761
11768
11761
11768
Two-Hand Ratchet Cable Cutter
Movable Blade (761)
Copper Aluminum
1000 kcmil (MCM) (500 mm2)
1000 kcmil (MCM) (500 mm2)
Communications Cable
1-1/8" dia. (28 mm2)
= Replacement Part
773
774
11256
01876
01878
11256
High Performance Ratchet Cable Cutter, 15-1/2"
High Performance Ratchet Cable Cutter 19-1/8"
Movable & Fixed Blades (773 & 774)
Copper Aluminum
Communications Cable
500 kcmil (MCM) (240 mm2)
350 kcmil (MCM) (150 mm2)
795 kcmil (MCM) (400 mm2)
750 kcmil (MCM) (400 mm2)
1-3/16" dia.
750 kcmil (MCM) (400 mm2)
500 kcmil (MCM) (240 mm2)
795 kcmil (MCM) (400 mm2)
750 kcmil (MCM) (400 mm2)
1-3/16" dia.
= Accessory
185
INTERNATIONAL
= new product
Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
specifications
773
Maximum Capacity*
Frequent Use Capacity*
Length 15-1/2" (394 mm);
Weight 5.3 lbs. (2.4 kg)
774
Maximum Capacity*
Frequent Use Capacity*
Length 19-1/8" (486 mm)
Weight 5.8 lbs. (2.6 kg)
UPC No.
CANADA
774
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
773
• Two-speed mechanism saves cutting time by closing the blades rapidly
and shifting to normal speed to perform the cut.
• No more pushing on stubborn release buttons–the blades open
automatically when the cut is complete.
• Completely new ratchet mechanism improves durability.
• Narrow profile permits use in deep boxes, against walls or on floors.
• Durable, lightweight fiberglass handles.
• U.S. Patent #6,766,581
Tel: 800.435.0786
Fax: 800.451.2632
High Performance Ratchet Cable Cutters
USA
specifications
Cutting Capacity*
Length 10-3/4" (273 mm)
Weight 3.6 lbs. (1.6 kg)
Wire & Cable Termination
Cat. No. UPC No.
specifications
Copper Aluminum
Maximum Capacity 1500 kcmil (MCM) (800 mm2) 1500 kcmil (MCM) (800 mm2)
Frequent Use Capacity 1000 kcmil (MCM) (500 mm2) 1000 kcmil (MCM) (500 mm2)
Length
27-1/2" (698 mm) long
Jaw opening
2" (51 mm)
Weight
11.41 lbs. (5.17 kg)
MADE FOR THE TRADE!™
Ratchet Cable Cutters
Wire & Cable Termination
• Simple, one-hand operation
• Exclusive two-speed ratcheting mechanism adjusts for light/heavy cutting
• Well-suited for tight working spaces
• Blades can be opened mid-cycle
• Available with cushioned handles or with 1000V insulated cushioned handles
45206
45207I
specifications
45206 & 45206I
Maximum Capacity*
Frequent Use Capacity*
Length 10" (254 mm)
Jaw opening 1-7/16" (36.5 mm)
45207 & 45207I
Maximum Capacity*
Frequent Use Capacity*
Length 11" (279 mm)
Jaw opening 2" (51 mm)
Cat. No.
UPC No.
Description
45206
45206I
45207
45207I
45218
45212
12526
45211
45228
05883
45206
12680
45207
12681
45218
45212
12526
45211
45228
05883
Ratchet Cable Cutter (1.5 lbs/.7 kg)
Ratchet Cable Cutter with Insulated Handles (1.5 lbs/.7 kg)
Rachet Cable Cutter (2.4 lbs/1.1 kg)
Rachet Cable Cutter with Insulated Handles (2.4 lbs/1.1 kg)
Movable Blade (45206 & 45206I)
Fixed Blade and Handle (45206)
Fixed Blade and Handle (45206I)
Movable Blade (45207 & 45207I)
Fixed Blade and Handle (45207)
Fixed Blade and Handle (45207I)
Copper Aluminum
Communications Cable
600 kcmil (MCM) (300 mm2)
500 kcmil (MCM) (240 mm2)
600 kcmil (MCM) (300 mm2)
500 kcmil (MCM) (240 mm2)
1-3/8" (35 mm) dia.
750 kcmil (MCM) (400 mm2)
600 kcmil (MCM) (300 mm2)
1000 kcmil (MCM) (500 mm2)
750 kcmil (MCM) (400 mm2)
2" (51 mm) dia.
• Simple, one-hand operation.
• Compact – convenient for working in tight places and stores easily
in tool pouches.
• Single-speed ratchet mechanism.
• Blade release allows blades to be opened in mid-cut.
• Heavy-duty blades provide long life.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Compact Ratchet Cable Cutters
186
760
759
specifications
759
Maximum Capacity*
Frequent Use Capacity*
Length 10-1/2" (262 mm)
Weight 1.4 lbs. (0.6 kg)
760
Maximum Capacity*
Frequent Use Capacity*
Length 11-3/4" (298 mm)
Weight 1.75 lbs. (0.8 kg)
*Capacity may be less for compact and compressed cables
Cat. No.
UPC No.
Description
759
760
45282
45281
09908
09907
45297
45277
17600
45282
45281
09908
09907
45297
Compact Ratchet Cable Cutter
Compact Ratchet Cable Cutter
Movable Blade (759)
Fixed Blade (759)
Movable Blade (760)
Fixed Blade (760)
Handle Spring
Copper Aluminum
Communications Cable
500 kcmil (MCM) (240 mm2)
400 kcmil (MCM) (185 mm2)
750 kcmil (MCM) (400 mm2)
600 kcmil (MCM) (300 mm2)
1-1/8" dia. (28 mm2)
1000 kcmil (MCM) (500 mm2)
750 kcmil (MCM) (400 mm2)
1000 kcmil (MCM) (500 mm2)
1000 kcmil (MCM) (500 mm2)
1-3/4" dia. (42 mm2)
www.greenlee.com
Heavy-Duty Cable Cutters
718F, 704, 705 and 706
• Strong, lightweight fiberglass handles.
• Adjustable pivot bolt provides for blade adjustment.
704, 705 and 706
• Replaceable, forged, heat-treated, and precision ground blades.
• Made in USA.
706
705
718F
UPC No.
Description
718F
704
705
706
24565
24567
05930
06555
22296
10507
24564
05923
22291
24565
24567
05930
06555
22296
Heavy-Duty Cable Cutter, 17-1/2"
Heavy-Duty Cable Cutter, 21"
Heavy-Duty Cable Cutter, 25-1/2"
Heavy-Duty Cable Cutter, 31-1/2"
704 Cutter Unit (Includes 2 Blades)
704 Handle Unit (Includes Handle, Sleeve, Grip)
705 Handle Unit (Includes Handle, Sleeve, Grip)
705 & 706 Cutter Unit (Includes 2 Blades)
706 Handle Unit (Includes Handle, Sleeve, Grip)
Specifications
capacities*
718F
704
Copper
350 kcmil (MCM) (150 mm2)
Maximum Use
350 kcmil (MCM) (150 mm2)
4/0 AWG (95)
250 kcmil (MCM) (120 mm2)
Frequent Use
Aluminum
Maximum Use
500 kcmil (MCM) (240 mm2)
2
350 kcmil (MCM) (150 mm2)
350 kcmil (MCM) (150 mm )
Frequent Use
Communications Cable
Maximum Use
1" (25 mm) dia.
1-1/4" (32 mm) dia.
Frequent Use
Length
Weight
17-1/2" (444 mm)
2.8 lbs. (1.3 kg)
21" (533 mm)
3.01 lbs. (1.37 kg)
705
706
500 kcmil (MCM) (240 mm2)
350 kcmil (MCM) (150 mm2)
750 kcmil (MCM) (400 mm2)
500 kcmil (MCM) (240 mm2)
1000 kcmil (MCM) (500 mm2)
750 kcmil (MCM) (400 mm2)
1000 kcmil (MCM) (500 mm2)
750 kcmil (MCM) (400 mm2)
1-3/4" (44 mm) dia.
1-1/2" (38 mm) dia.
25-1/2" (648 mm)
5.5 lbs. (2.5 kg)
31-1/2" (800 mm)
6.2 lbs. (2.8 kg)
Wire & Cable Termination
704
Cat. No.
*Capacity may be less for compact and compressed cables
Description
30208
Cable Cutter
*Capacity may be less for compact and compressed cables
718HL Cable Cutter
UPC No.
Description
718HL
12847
Cable Cutter
*Capacity may be less for compact and compressed cables
= new product
= Replacement Part
= Accessory
187
INTERNATIONAL
Cat. No.
specifications
Capacity
Copper Aluminum
Maximum Capacity*
500 kcmil
500 kcmil
Frequent Use Capacity* 350 kcmil
500 kcmil
Length 18" (457 mm)
Weight 3.25 lbs. (1.5 kg)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Unique “double joint” reduces handle effort required by 25% and
increases cutting capacity to 500 kcmil
• Fits into tool boxes
• Heat-treated, precision ground, shear action blades
• Strong steel handles with molded grips for good leverage
• Patent Pending
CANADA
UPC No.
718
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
specifications
Copper Aluminum
Capacity
Maximum Capacity*
350 kcmil (MCM) (150mm2)
Frequent Use Capacity* 4/0 (95 mm2)
350 kcmil (MCM) (150 mm2)
Length 18" (457 mm)
Weight 2.78 lbs. (1.3 kg)
Tel: 800.435.0786
Fax: 800.451.2632
• Economical, lightweight, fits easily into tool boxes.
• Heat-treated, precision ground, shear action blades.
• Steel handles with rubber grips for leverage.
• Made in USA.
USA
718 Cable Cutter
MADE FOR THE TRADE!™
Cable Cutter
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Wire & Cable Termination
727
188
• Easily cuts heavier copper and aluminum cables up to 2/0 (70 mm²).
• Precision-ground, shear-action, curved cutting blades.
• 727 has PVC-covered, high-leverage handles for easier cuts.
• 727M has cushion grip, high-leverage handles for added comfort.
• Heat-treated for long life.
• Made of heavy-duty forged steel.
• Rust-resistant black oxide finish.
Cat. No.
UPC No.
Description
727
727M
31291
12629
Cable Cutter
Cable Cutter with Molded Grip
specifications for 727 and 727M
Capacity
Copper Aluminum
Maximum Capacity 2/0 (70 mm2)
Frequent Use Capacity #1 AWG (35 mm2) 2/0 (70 mm2)
Length 9-1/4" (235 mm)
Weight 1 lb. (.45 kg)
727M
Communications Cable
100 pair
ETS12L Battery-Powered Bolt Cutter
• Designed to cut one-time disposable locks, shipping container seals and
small diameter bolts.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles
per charge and faster cycle times.
• LED light provides the operator with the battery charge and tool
maintenance status.
• In line tool style is light weight and very easy to control
• One trigger controls all tool functions.
• Cutting head rotates 350°
• Tools automatically retract when the cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger
specifications
Length
Weight
Battery
Battery Charge Time
Est. Cycles per Charge
13-5/8" (365 mm)
4.4 lbs. (2.0 kg)
18V 1.5 Ah Li-ion
30 Minutes
200
Cutting Capacity
Common Bolt
Grade 5 Bolt
Grade 8 Bolt
Threaded Rod
One-Time
Disposable Lock
Boa Lock
Grade 40 Rebar
Steel Rod
Ground Rod
Copper and
Aluminum Cable
ACSR
Guy Strand
EHS Guy Strand
Aircraft Cable
1/2" diameter
7/16" diameter
5/16" diameter
1/2" diameter
4 AWG Alumoweld
BL-9
3/8" diameter
3/8" diameter (1/2" diameter using two cycles)
3/8" diameter (1/2" diameter using two cycles)
2/0 AWG
3/0 AWG Pigeon (4/0 AWG Pigeon using two cycles)
5/16" diameter (3/8" diameter using two cycles)
5/16" diameter
1/4" diameter
Cat. No.
UPC No.
Description
ETS12L11
ETS12L12
ETS12L22
ETS12L120
ETS12L230
25752
52177
56288
52178
52179
52180
52134
52135
52136
52137
52138
25752
52177
56288
52178
52179
52180
Battery Bolt & Lock Cutter-120 Volt Charger
Battery Bolt & Lock Cutter-12 Volt Charger
Battery Bolt & Lock Cutter-220 Volt charger
Bolt & Lock Cutter w/120V AC Adapter
Bolt & Lock Cutter w/230V AC Adapter
Carrying Case
18V 1.5 Ah Li-ion Battery
Cutter Blade Kit
120V Charger
12V Charger
230V Charger
www.greenlee.com
Gator® ETS8L Cable Tray Cutter
SPECIFICATIONS
CUTTING CAPACITIES
MATERIAL
3/16"
1/4"
5/16"
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
52139
52140
52141
52142
52143
52177
25752
19987
52178
52179
52180
Battery Cable Tray Cutter w/120V charger
Battery Cable Tray Cutter w/12V charger
Battery Cable Tray Cutter w/230V charger
Cable Tray Cutter w/120V AC Adapter
Cable Tray Cutter w/230V AC Adapter
18V 1.5 Ah Li-ion Battery
Carrying Case
Blade Set
120V Charger
12V Charger
230V Charger
= Replacement Part
= Accessory
189
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
1/8"
ETS8L11
ETS8L12
ETS8L22
ETS8L120
ETS8L230
52177
25752
19987
52178
52179
52180
Tel: 800.435.0786
Fax: 800.524.2853
Cable Tray (Mild steel, Zinc Plated)
Cable Tray (Stainless Steel)
Threaded Rods
Threaded Rods, Stainless Steel
Steel Bolts (Grade 2)
Steel Bolts (Grade 8)
Diameter
1/16"
Description
USA
3.3 LBS. (1.5 KG)
12-1/8" (308mm)
18V 1.5 Ah Li-ion
30 Minutes
400
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Weight
Length
Battery
Battery Charge Time
Est. Cycles per Charge
Cat. No.
Wire & Cable Termination
• Cuts basket style cable tray wires in 2 seconds.
• Makes flush cuts.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles
per charge and faster cycle times.
• LED light provides the operator with the battery charge and tool
maintenance status.
• In line tool style is light weight and very easy to control
• One trigger controls all tool functions.
• Cutting head rotates 350°
• Tools automatically retract when the cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger
MADE FOR THE TRADE!™
ACSR, GUY STRAND & STEEL CUTTING
Selection Guide for ACSR, Guy Strand & Steel Cutters
ACSR
Std. Guy Strand
EHS Guy Strand
Ground Rod
Rebar
(schedule 60)
ESG45L
1590.0 kcmil
5/8" (16 mm) dia.
1/2"
5/8" (16 mm) dia.
1/2" (13 mm) dia.
ES25
636 kcmil (except Egret)
Page #
Wire & Cable Termination
BATTERY-POWERED
191
190
HYDRAULIC-TYPE
HK520
336.4 kcmil
1/2" (13 mm) dia.
1/2"(13 mm) dia.
1/2" (13 mm) dia.
1/2" (13 mm) dia.
1/2" (13 mm) dia.
7/16" (11 mm)
191
RATCHET-TYPE
776
757
758
636.0 kcmil*
954.0 kcmil
1/2" (13 mm) dia.
192
192
192
manual
749
2/0 AWG
193
cutter dies
00949
KD6-27
477.0 kcmil
4/0 AWG
5/8" (16 mm) dia.
5/8" (16 mm) dia.
5/8" (16 mm) dia
5/8" (16 mm) dia
193
193
* For core diameters less than 0.32"
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
ES25 Battery-Powered ACSR Cutter
• Cuts ACSR type cables through 636 kcmil (except Egret).
• One-hand operation permits operator to control the cable with a free hand.
• Capable of making approximately 50 cuts of Grosbeak or 120 cuts
of Merlin per battery charge.
• Blades are specially contoured and hardened to cut both aluminum
and steel strands.
• Operator can switch between reverse and forward direction
with one finger.
• Powerful 14.4 volt battery charges in less than one hour.
• Includes two batteries, battery charger, and molded carrying case.
• Choice of 120 volt or 230 volt battery charger.
Cat. No.
UPC No.
Description
ES2511
ES2522
76807
11851
11845
11841
11856
35369
22132
76807
11851
11845
11841
11856
Battery ACSR Cutter, 120 V Charger
Battery ACSR Cutter, 230 V Charger
Blade Kit
14.4 V NiCd Battery
Carrying Case
120V Charger
230V Charger
SPECIFICATIONS
USA
Tel: 800.435.0786
Fax: 800.451.2632
Capacity
190
Length
Weight
Battery
Battery Charge Time
ACSR
Aluminum
14-3/4" (375mm)
7.7 lb. (3.5 kg)
14.4 Volt, NiCd
1 Hour
636 kcmil (except Egret)
1500 kcmil
www.greenlee.com
Gator® Battery-Powered ACSR & Guy Wire Cutters
Wire & Cable Termination
• Designed specifically to cut ACSR, guy strand and ground rods.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per
charge and faster cycle times.
• Retraction Stop allows the operator to stop the ram retraction at any point
simply by tapping the trigger, and then starting the next cutting cycle from
that point saving time and energy.
• LED light provides the operator with the battery charge and tool
maintenance status.
• Two-stage hydraulic system provides fast advance and power speeds,
saving time.
• Forward handle position improves tool balance.
• One trigger controls all tool functions.
• Cutting head rotates 350°
• Tools automatically retract when the cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered cutting tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger
• U.S. Patents #6,206,663 and #6,065,326
SPECIFICATIONS
1/2" diameter (13 mm diameter)
5/8" diameter (16 mm diameter)
1/2" diameter (13 mm diameter)
Wire Rope:
Copper and Aluminum
Cable:
Soft Steel Bolts:
Length
Height
Weight
Battery
5/8" diameter (16 mm diameter)
1500 kcmil (MCM) (800 mm2)
Battery Charge Time
1 hour
Est. Cycles per Charge
90
5/8" diameter (16 mm diameter)
16-5/8" (423 mm)
13" (330 mm)
13 lbs. (5.9 kg)
18V 3.0 Ah Li-ion
upc no.
description
ESG45L11
52124
ESG45L12
52125
ESG45L22
52126
ESG45L120
ESG45L230
ESG45ESI
ESG45EF
52176
10118
12274
52178
52179
52180
52127
52128
10398
10397
52176
10118
12274
52178
52179
52180
Battery-Powered ACSR Cable Cutter,
120 V charger
Battery-Powered ACSR Cable Cutter,
12 V charger
Battery-Powered ACSR Cable Cutter,
230 V charger
Cable Cutter w/120V AC Adapter
Cable Cutter w/230V AC Adapter
Movable Blade
Fixed Blade
18V 3.0 Ah Li-ion Battery
Carrying Case for ESG45L
Carrying Strap
120V Charger
12V Charger
230V Charger
Capacity
Cat. No.
UPC No.
Description
HK520
00336
00301
08031
00336
00301
Hydraulic ACSR Cable Cutter
Cutter Blade
Fixed Cutter Head
= new product
= Replacement Part
= Accessory
Length
Weight
ACSR: 336.4 kcmil (MCM)
Standard Guy Wire, Ground Rod: 1/2" (13 mm)
Soft Steel Bolts: 11/16" (17 mm)
Wire Rope: 3/4" (19 mm)
Rebar: 7/16" dia. (Schedule 60)
14.5" (368 mm)
5.7 lbs. (2.6 kg)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
191
INTERNATIONAL
• Hydraulic cutter takes the effort out of cutting tough cables.
• Flip-open head provides strength while making it easy to cut long lengths.
• Head rotates 180°.
• Thumb release lever for quick blade retraction.
Tel: 800.435.0786
Fax: 800.524.2853
Hydraulic ACSR Cable Cutter
CANADA
EHS Guy Strand:
Ground Rod:
Rebar (schedule 60):
cat. no.
USA
1590 kcmil (MCM), (Falcon 54/19)
5/8" diameter (16 mm diameter)
Tel: 800.435.0786
Fax: 800.451.2632
Capacity
ACSR:
Standard Guy Strand:
MADE FOR THE TRADE!™
High Performance Ratchet ACSR Cable Cutter
Wire & Cable Termination
• Two-speed mechanism saves cutting time by closing the blades
rapidly and shifting to normal speed to perform the cut.
• Patented mechanism opens the blades automatically when the cut
is complete. (U.S. Patent #6,766,581)
• Completely new ratchet mechanism provides excellent durability.
• Short length fits easily into truck bins.
• Durable, lightweight fiberglass handles.
Cat. No.
UPC No.
Description
776
11397
02826
11397
High Performance ACSR Cable Cutter
Movable & Fixed Blade Set
SPECIFICATIONS
Capacity
Cuts ACSR through 636 kcmil with steel core
diameters less than 0.32"
All 336.4 and Smaller ACSR plus:
397.5 - Brant, Chickadee, Ibis
477.0 - Pelican, Flicker, Hawk
556.5 - Osprey, Parakeet
605.0 - Peacock
636.0 - Kingbird, Swift, Rook
20" (508 mm)
6.2 lb. (2.8 kg)
Specifically cuts:
Length
Weight
Ratchet ACSR Cable Cutter
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Extra-thick blades, ground flat to reduce potential for breakage.
• Ratchet action for increased cutting power.
• Two cutting actions – fast scissor cutting for small cable; converts
automatically to ratchet mode.
• Anti-slip mechanism for positive ratchet action.
• Rubber boot protects ratchet mechanism.
192
Cat. No.
UPC No.
Description
757
34187
34084
34187
Ratchet ACSR Cable Cutter
Cutter Head Unit (Includes 2 Blades)
SPECIFICATIONS
Capacity
Length
Jaw opening
Weight
954 kcmil (MCM) ACSR, 1/2" (12.7 mm) soft steel rod
29-1/4" (743 mm)
1.18" (30 mm)
12.22 lbs. (5.54 kg)
EHS Guy Wire Cutter
• Cuts 1/2" Extra High Strength (EHS) and standard guy wire.
• Cuts 1/2" (12.7 mm) mild steel rods and bolts.
• Has two cutting actions – single-motion cutting for small cable,
ratchet action for heavy-duty cutting.
• Anti-slip mechanism for positive ratchet action.
Cat. No.
UPC No.
Description
SPECIFICATIONS
758
03548
01274
03548
Heavy-Duty Ratchet Guy Wire Cutter
Cutter Head Unit (Includes Blades, Blade
Holder, Insert and Hardware)
Capacity
Length
Weight
1/2" EHS and standard Guy Wire, 1/2" Mild Steel Rods and Bolts
27-3/4" (704 mm)
10 lbs. 12 oz. (4.8 kg)
www.greenlee.com
Guy Wire Cutter Dies
Cat. No.
UPC No. Description
00949
00949
SPECIFICATIONS
Cutting dies for 12-ton “U” die type
crimping tools
Capacity
Guy Wire: 5/8" (16 mm) dia.
Ground Rod: 5/8" (16 mm) dia.
EHS Guy Wire: 5/8" (16 mm) dia.
Soft Steel Bolts: 5/8" (16 mm) dia.
Rebar (grade 60): 5/8" (16 mm) dia.
ACSR: 477 kcmil (MCM) (240 mm²)
KD6-27 Cutter Dies
• “W” style dies for cutting ACSR
• Now, with improved steel and heat treatment for better durability
• Can be used with any crimping tool that accepts “W” dies. Including:
Greenlee K425O, K425BG, EK622L, ECCXL (with UAW adapters), and
EK628L (with CJD3 jaws).
• Similar to Burndy W-28K.
Cat. No.
UPC No.
Description
SPECIFICATIONS
KD6-27
10182
“W” Style Cutting Dies for ACSR
Capacity
Wire & Cable Termination
• Works with any crimping tool that accepts 12-ton “U” type dies.
• Less costly than dedicated cutting tools.
• Simple to install in crimping tools.
• Requires no adjustments for cutting different materials.
• Will cleanly cut guy wire (including EHS), grade 60 rebar, ground rod,
soft steel bolts up to 5/8" (16 mm) and up to 477 kcmil (MCM)
(240 mm2) ACSR.
• U.S. Patent Number 5,775,158.
4/0 ACSR
SPECIFICATIONS
Capacity
Description
749
04663
32913
04663
ACSR Cable Cutter
Bolt & Nut Set
Length
Weight
Steel Cable & Wire Rope Cutter
Capacity
Cat. No.
UPC No.
Description
722
19990
Wire Rope & Cable Cutter
= new product
= Replacement Part
= Accessory
Length
Weight
Soft Wire Rope: 1/4" (6 mm) dia.
Aircraft Cable: 3/16" (5 mm) dia.
Hard Steel Wire: 3/16" (5 mm) dia.
Copper/Aluminum Cable: 15/64" (6 mm) dia.
7 7/8" (200 mm)
.75 lbs. (.34 kg)
193
INTERNATIONAL
SPECIFICATIONS
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Cuts small diameter wire rope & wire
• Heavy-duty forged steel blades and handles
• Heat treated, precision ground, shear action cutting blades
• Cushioned handle grips
CANADA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
ACSR Cable: 2/0, 7/16" (11.1 mm)
Piano Wire: 1/8" (3.2 mm)
Copper/Aluminum Cable: 350 kcmil (mcm) (150 mm²)
28" (711 mm)
5.66 lbs. (2.6 kg)
Tel: 800.435.0786
Fax: 800.451.2632
• Precision-machined, forged steel blades.
• Cuts ACSR service entrance cable.
• Steel handles with rubber hand grips.
USA
ACSR Cable Cutter
MADE FOR THE TRADE!™
COMMUNICATIONS AND UNDERGROUND POWER CABLE CUTTING
Wire & Cable Termination
Gator® ESC105 Battery-Powered Cable Cutter
• Two-speed pump advances the ram quickly to start the cut.
• Blades open automatically when a cut is complete.
• By momentarily pulling the trigger, the operator can save time by stopping the blades at any point to prepare for the next cut.
• Scissor-style blades are easy to fit around cables and can pick up cables
on the ground.
• Cutting head rotates 360˚ for making cuts in tight locations.
• Side handle enhances operator control.
• One-hour battery charger, carrying case, and two batteries included.
• Choice of 120V, 12V, or 230V battery charger.
SPECIFICATIONS
Capacity*
Length
Height
Battery
Cycles per Battery Charge
Battery Charge Time
4" dia. (105 mm) Communications,
Cu & Al power cables
13-3/4" (604 mm)
22 lbs. (9.9 kg)
12V, 2.6 Ah, NIMH
40
1 hour
Cat. No.
UPC No.
Description
ESC10511
ESC10512
ESC10522
07063
12861
12862
12274
03046
03048
03047
12858
12859
12860
07063
12861
12862
12274
03046
03048
03047
Cable Cutter w/120V Charger
Cable Cutter w/12V Charger
Cable Cutter w/230V Charger
12V NIMH Battery
Cutting Blade Kit (includes 2 blades)
Carrying Case
Carrying Strap
120V Charger
12V Charger
230V Charger
* Not for cutting ACSR, guy strand, or other cables with steel strands
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Gator® ESC85L Battery-Powered Cable Cutter
194
Cat. No.
UPC No.
Description
ESC85L11
ESC85L12
ESC85L22
ESC85L120
ESC85L230
52176
23483
10118
12274
52178
52179
52180
52119
52120
52121
52122
52123
52176
23483
10118
12274
52178
52179
52180
Cable Cutter w/120V Charger
Cable Cutter w/12V Charger
Cable Cutter w/230V Charger
Cable Cutter w/120V AC Adapter
Cable Cutter w/230V AC Adapter
18V 3.0 Ah Li-ion Battery
Cutting Blade (2/tool)
Carrying Case
Carrying Strap
120V Charger
12V Charger
230V Charger
• For cutting large diameter underground power and communications cables.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per
charge and faster cycle times.
• Retraction Stop allows the operator to stop the ram retraction at any point
simply by tapping the trigger, and then starting the next cutting cycle from
that point saving time and energy.
• LED light provides the operator with the battery charge and tool
maintenance status.
• Two-stage hydraulic system provides fast advance and power speeds,
saving time.
• Scissor-style blades are easy to fit around cables.
• Side handle enhances operator control
• Forward handle position improves tool balance.
• One trigger controls all tool functions.
• Cutting head rotates 350°
• Tools automatically retract when the cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered cutting tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger
SPECIFICATIONS
Capacity
Length
Height
Battery
Battery Charge Time
Est. Cycles per Charge
1
3-3/8" dia. (85 mm)1 Communications,
Cu & Al power cables
21" (533 mm)
14.9 lbs. (6.7 kg)
18V 3.0 Ah Li-ion
1 hour
90
Lead sheathed communications cable: 2-1/2" (64 mm)
www.greenlee.com
Hydraulic Communications and Underground Power Cable Cutter Head
• Easily cuts large diameter communication cable and underground
distribution cable.
• Swiveling handle allows for quick positioning for cuts.
• 3/8" male screw-type coupler.
• See pages 430- 433 for hydraulic hose and pump selection.
UPC No.
Description
SDK202GL
03137
Hydraulic Communications Cable Cutter Head
SPECIFICATIONS
Capacity
Weight
Length
Maximum Operating Pressure
3-1/2" (90 mm) diameter
Al and Cu communications cable
27.5 lb. (12.5 kg).
18-7/8" (480 mm)
10,000 psi (700 bar)
Ratchet Communications Cutter
This versatile cutter has a specially designed moving blade to handle
the larger diameter telephone cable and soft drawn copper and
aluminum.
• Cuts up to 2,700 pair 3" telephone cable.
• Blade release for safety and fast backout.
• Ratchet lock.
• Blades are manufactured from high carbon tool steel and heat-treated
for long life.
• Rust-resistant, black oxide finish.
Description
45240
45241
45242
45240
45241
45242
Telco Ratchet Cutter
Movable Blade
Fixed Blade
SPECIFICATIONS
Length
Weight
11-1/2" (287 mm)
2.8 lbs. (1.3 kg)
Heavy-Duty Manual Communications Cable Cutter
765
05935
06011
05935
Heavy-Duty Communications Cutter
Cutter Blade (765) (2 required)
SPECIFICATIONS
Cutting Capacity
Length
Weight
= new product
= Replacement Part
= Accessory
2-1/4" (57 mm) Communications Cable (900 pair, 24 AWG)
37" (940 mm)
7.2 lbs. (3.3 kg)
195
INTERNATIONAL
Description
CANADA
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Forged and heat-treated blades specially designed
for communications cable.
• Easily cuts cables up to 2-1/4" (57 mm) in diameter.
• Makes clean cuts with minimal distortion on lead, rubber,
PVC and polyethelyne-sheathed cables.
• Blades and handles are replaceable in case of damage.
• Precision-ground, shear-type blades.
• Fiberglass handles with non-slip rubber grips.
Tel: 800.435.0786
Fax: 800.451.2632
UPC No.
USA
Not for use on ACSR
or steel jacketed cable
Cat. No.
Wire & Cable Termination
Cat. No.
MADE FOR THE TRADE!™
Greenlee Crimping Tool Capacities
TOOL TYPE
4 TON 4.5 TON 6 TON
(4)
EK410L K425O
K425BG
12 Ton
(5)
EK628L (6) HK1230
RK1240 RK1550
EK622L
HK1240 EK1550
ECCXL
EK1230L
Rotating
Die (1)
K111
K05-1GL
K09-2GL
K09-3GL
K05-1SPGL K09-2.5SPGL
HKL1232 EK1240L
Wire & Cable Termination
15 Ton
E12CCXL
Quad-Point Dieless
Dieless
RK06AT
RK06FT
HK06AT
HK06FT
1981
1990
EK12IDL
HK12ID
EKO6ATL EK06FTL
º
Connector Type
INDUSTRIAL
Copper Lugs
8-300 8-500
8-600 (2) 8-750
8-750
8-1500
8-1
8-1/0
8-4/0
3/0-400
6-500
6-750
8-250
4-1000 4-1000
Copper Splices
8-300 8-500
8-600 (2) 8-400
8-750
8-1500
8-1
8-1/0
8-4/0
3/0-400
6-500
6-750
8-250
4-1000 4-1000
Aluminum Lugs
8-2/0 8-4/0
8-300 (3) 8-750
8-750
8-1000
6-400
6-750
8-4/0
6-1000 6-1000
Aluminum Splices 8-2/0 8-4/0
8-300 (3) 8-400
8-750
8-1000
6-400
6-750
8-4/0
6-1000 6-1000
Copper “C” Taps
12-2 (4)
12-400
12-400 8-1000
6-500
6-500
6-1000
6-1/0 (3)
6-500
6-750
6-750
6-3 (4)
6-500
6-500
6-500
6-500
6-500
6-500
10-2
Aluminum “H” Taps
Aluminum Pin
Adapters
6-1/0
6-750
GROUNDING
Ground Grid
Connectors
Copper “E” Taps
OVERHEAD
5/8" Service
Ent. Connectors
10-1/0 10-1/0
10-1/0 (4) 10-1/0
10-1/0 10-1/0
8-1/0
8-1/0
4-350
4-350
6-4/0
6-4/0
4-477
4-477
.840 Service Ent.
INTERNATIONAL
Connectors
Tel: +1.815.397.7070
Fax: +1.815.397.9247
1/0-4/0 (4) 1/0-4/0
1/0-4/0 1/0-4/0
Aluminum “H” Taps
6-4/0
6-4/0 (4)
6-500
6-500
Copper “H” Taps
10-2
12-2 (4)
12-4/0
12-4/0 12-4/0
6-2/0
6-2/0 (4)
6-500
6-500
6-4/0
6-4/0 (4)
6-587.5
6-587.5 6-587.5
4-1/0
4-1/0 (4)
4-556.5
4-556.5 4-556.5
2-477
2-4/0 (4)
2-556.5
2-556.5 2-900
4-266.8
4-266.8 (4) 4-556.5
4-556.5 4-795
1/0-4/0 1/0-4/0
Copper Tension
Splice
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
6-500
All Aluminum
Tension Splice
One Piece ACSR
Tension Splice
Two Piece ACSR
Tension Splice
196
6-900
Aluminum Jumper
Splice
Stirrups
2-4/0
6-4/0 (4)
6-500
6-500
Aluminum Lugs
2-1/0
4-4/0 (4)
4-556.5
4-556.5 4-795
6-500
Copper Lugs
6-1/0
1/0-2/0 (4) 1/0-500
1/0-500 1/0-500
NOTES: (1) Die wheels are rotated to match the cable size. Dies are color coded and marked with the cable size.
(2) Capacity using Greenlee KC22 dies.
(3) Capacity using Greenlee KA22 dies.
(4) Capacity using “W” dies.
(5) Capacity using “U” dies.
(6) Not for use with Burndy 400, 500, and 600 kcmil splices and Penn-Union 600 kcmil splices. The EK628L can be used with all sizes of Burndy & Penn-Union lugs from 8AWG to 600 kcmil.
www.greenlee.com
DIE-TYPE CRIMPING
Gator® Battery-Powered 4-Ton Crimping Tool
EK410L
Description
EK410L11
52089
EK410L12
52090
EK410L22
52091
EK410L120
EK410L230
52177
25752
52178
52179
52180
52092
52101
52177
25752
52178
52179
52180
4-Ton Battery-Powered Crimping Tool,
120V Charger
4-Ton Battery-Powered Crimping Tool,
12V Charger
4-Ton Battery-Powered Crimping Tool,
230V Charger
4-Ton Crimping Tool w/120V AC Adapter
4-Ton Crimping Tool w/230V AC Adapter
18V 1.5 Ah Li-ion
Carrying Case
120V Charger
12V Charger
230V Charger
*UL and cUL classified with Anderson®, Blackburn®, Burndy®, ILSCO®, Panduit®, Penn-Union® and
Thomas & Betts® copper and aluminum color-coded connectors. The products listed above are
registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and
Thomas & Betts®.
= new product
= Replacement Part
= Accessory
197
INTERNATIONAL
Crimping dies on page 210
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Crimping Force
Length
Width
Weight
Crimp Cycle Time
Battery
Battery Charge Time
Est. Cycles per Charge
8 AWG to 300 kcmil (MCM) copper color-coded connectors
8 AWG to 2/0 AWG aluminum color-coded connectors
5/8" service entrance connectors
840 service entrance connectors
7,900 lb. (35 kN)
13-1/4" (337 mm)
2-7/8" (73 mm)
4 lbs. (1.8 kg)
~4 seconds
18V 1.5 Ah Li-ion
30 minutes
200
Tel: 800.435.0786
Fax: 800.524.2853
Capacity
CANADA
SPECIFICATIONS
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
Wire & Cable Termination
• Intelligent Crimping System Technology includes a pressure sensor that
monitors the crimping force of each crimp and provides the operator a
visual and audible alert if the force is below specifications.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles
per charge and faster cycle times.
• LED light provides the operator with the battery charge and tool
maintenance status.
• In line tool style is light weight and very easy to control
• One trigger controls all tool functions.
• Crimping head rotates 350°
• Tools automatically retract when the crimping or cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Used with Greenlee KC4, KA4 and KD4 crimping dies.
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger
MADE FOR THE TRADE!™
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Wire & Cable Termination
EK628L Battery-Powered 6-Ton Crimping Tool
198
EK628L
• Intelligent Crimping System Technology includes a pressure sensor that
monitors the crimping force of each crimp and provides the operator a
visual and audible alert if the force is below specifications.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles
per charge and faster cycle times.
• LED light provides the operator with the battery charge and tool
maintenance status.
• In line tool style is light weight and very easy to control
• One trigger controls all tool functions.
• Crimping head rotates 350°
• Tools automatically retract when the crimping or cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger
• Equipped with CJ22 crimping jaws that accept Greenlee KC22 and KA22
series crimping dies.
• When equipped with optional CJD3 crimping jaws, can be used with all
industry "W" style crimping dies & Greenlee KD6 series dies.
• When equipped with optional CJK crimping jaws, can be used with
Thomas & Betts "6-Ton" crimping dies.
Cat. No.
UPC No. Description
EK628L11
EK628L12
EK628L22
EK628L120
EK628L230
K22S1GL
52102
52103
52104
52105
52106
03078
KD06AL
01631
CJD3
CJK
25752
52177
52178
52179
52130
03242
04829
25752
52177
52178
52179
52130
EK628L crimping tool w/120 V battery charger
EK628L crimping tool w/12 V battery charger
EK628L crimping tool w/230 V battery charger
EK628L Crimping Tool w/120V AC Adapter
EK628L Crimping Tool w/230V AC Adapter
Die Kit for 8 AWG-600 kcmil Copper Connectors
(Includes all copper die sets listed below and carrying case)
Die Kit for 8 AWG-350 kcmil Aluminum Connectors
(Includes all aluminum die sets listed below and carrying case)
Crimping jaw unit- “W” dies
Crimping jaw unit- Thomas & Betts “6-Ton” dies
Carrying Case
18V 1.5 Ah Li-ion
120V Charger
12V Charger
230V Charger
SPECIFICATIONS
Capacity*
Crimping Force
Length
Width
Weight
Battery
Crimp Cycle Time
Battery Charge Time
Est. Cycles per Charge
8AWG to 600 kcmil copper color-coded connectors
8AWG to 350 kcmil aluminum color-coded connectors
12,000 lbs (53 kN)
18-1/2" (470 mm)
2-7/8" (73 mm)
6 lbs. (2.7 kg)
18V 1.5 Ah Li-ion
~6 seconds
30 minutes
150
Crimping dies on page 211
*UL and cUL classified from 8 AWG to 600 kcmil with Anderson®, Blackburn®, Burndy®, ILSCO®,
Panduit®, Penn-Union® and Thomas & Betts® copper code color-coded connectors when used
with Greenlee KC22 crimping dies. Not for use with Burndy 400, 500 or 600 kcmil splices
and Penn-Union 600 kcmil splices. UL & cUL classified from 8 AWG to 350 kcmil (MCM) with
Anderson, Blackburn®, Burndy, ILSCO, Panduit, Thomas & Betts, and Penn-Union aluminum code
color-coded connectors when used with Greenlee KA22 crimping dies.
www.greenlee.com
Gator® Battery-Powered and Corded 6-Ton Crimping Tools
EK622L
description
EK622L11
EK622L12
EK622L22
EK622L120
EK622L230
52177
25752
12274
04292
52178
52179
52180
52084
52085
52086
52087
52088
52177
25752
12274
04292
52178
52179
52180
6-Ton Battery-Powered Crimping Tool 120 V charger
6-Ton Battery-Powered Crimping Tool 12 V charger
6-Ton Battery-Powered Crimping Tool 230 V charger
6-Ton Crimping Tool w/120V AC Adapter
6-Ton Crimping Tool w/230V AC Adapter
18V 1.5 Ah Li-ion
EK622L Carrying Case
Carrying Strap
Die Adapter for “W” Type Dies
120V Charger
12V Charger
230V Charger
Capacity
Color-coded copper lugs and splices, 600 kcmil (MCM).
Color-coded aluminum lugs and splices, 350 kcmil (MCM).
For capacity with other types of connectors, see chart on
page 196.
12,000 lb (53 kN)
15-3/4" (438 mm)
6.5 lbs. (3 kg)
18V 1.5 Ah Li-ion)
30 minutes
100
Crimping Force
Length
Weight
Battery
Battery charge time
Est. Cycles per Charge
Crimping dies on page 211
= Replacement Part
= Accessory
199
INTERNATIONAL
= new product
Tel: +1.815.397.7070
Fax: +1.815.397.9247
*UL and cUL classified with Anderson®, Blackburn®, Burndy®, ILSCO®, Panduit®, Penn-Union® and
Thomas & Betts® copper lugs and splices to 600 kcmil (MCM) and with aluminum lugs & splices to
350 kcmil (MCM). The products listed above are registered trademarks of Anderson®, Blackburn®,
FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
CANADA
battery powered
Tel: 800.435.0786
Fax: 800.524.2853
specifications
USA
upc no.
Tel: 800.435.0786
Fax: 800.451.2632
cat. no.
Wire & Cable Termination
• Intelligent Crimping System Technology includes a pressure sensor that
monitors the crimping force of each crimp and provides the operator a
visual and audible alert if the force is below specifications.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles
per charge and faster cycle times.
• LED light provides the operator with the battery charge and tool
maintenance status.
• In line tool style is light weight and very easy to control
• One trigger controls all tool functions.
• Crimping head rotates 350°
• Tools automatically retract when the crimping or cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Accepts Greenlee KC22 and KA22 series crimping dies.
• Includes 04292 die adapters which can be used with all industry "W"
style crimping dies and Greenlee KD6 style dies.
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger
MADE FOR THE TRADE!™
Gator® 12-Ton Battery-Powered Crimping Tools
Wire & Cable Termination
EK1230L
EK1240L
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
EK1240CL
EK1240KL
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
Tel: 800.435.0786
Fax: 800.524.2853
SPECIFICATIONS
200
Capacity*
Crimping Force
Length
Weight
Battery
Est. Cycles per Charge
EK1230L & EK1240L – 8 AWG to 750 kcmil
copper color-coded lugs and splices
See crimping tool capacity chart on page 196,
for additional capacities
EK1240K – ACSR terminals 1033 kcmil (MCM),
ACSR tension fittings 477 kcmil (MCM)
24,000 lb (106 kN)
EK1230L – 15-1/2" (394 mm);
EK1240L – 16-1/4" (413 mm);
EK1230L – 14.5 lbs (6.6 kg)
EK1240L – 15 lbs. (6.8 kg)
EK1240KL – 15 lbs. (6.8 kg)
18V 3.0 Ah Li-ion
90
Crimping dies on page 212
* EK1230 and EK1240 are UL and cUL classified with Anderson®, Blackburn®, Burndy®,
ILSCO®, Panduit®, Penn-Union® and Thomas & Betts® copper and aluminum color-coded
lugs and splices when used with Greenlee KC12 and KA12 crimping dies. The products
listed above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®,
Panduit®, Penn-Union® and Thomas & Betts®.
• Intelligent Crimping System Technology includes a pressure sensor that monitors the
crimping force of each crimp and provides the operator a visual and audible alert if
the force is below specifications.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge
and faster cycle times.
• Automatic Retraction Stop (ARS) which retracts the ram just enough to get ready for
the next cycle saving time and energy.
• LED light provides the operator with the battery charge and tool maintenance status.
• Two-stage hydraulic system provides fast advance and power speeds, saving time.
• Forward handle position improves tool balance.
• One trigger controls all tool functions.
• Crimping head rotates 350°
• Tools automatically retract when the crimping cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded
adapter in place of batteries and charger
• Three crimping head choices: EK1230L with 1.20" (30mm) opening uses
Greenlee KC12, KA12 & KD12 crimping dies plus all industry "U" style crimping
dies, EK1240L with 1.65" (42mm) opening uses Greenlee KC12, KA12 & KD12
crimping dies plus all industry "U" style crimping dies, EK1240KL uses Kearney
PH2 style crimping dies.
• Covered head models have two layers of PVC that total approximately 3/16" (4.8
mm) thick. The outer layer is black and the inner layer is red.
• U.S. Patents #6,206,663 and #6,065,326
Cat. No.
UPC No.
Description
EK1230L11
52068
EK1230L12
52069
EK1230L22
52070
EK1230L120
EK1230L230
EK1240L11
52071
52072
10227
EK1240L12
10229
EK1240L22
10231
EK1240L120
EK1240L230
EK1240CL11
10234
10237
52043
EK1240CL12
52044
EK1240CL22
52045
EK1240CL120
EK1240CL230
EK1240KL11
52046
52047
12566
EK1240KL12
12567
EK1240KL22
12569
EK1240KL120
52176
10118
12274
52178
52179
52180
12568
52176
10118
12274
52178
52179
52180
12-Ton Battery-Powered Crimping Tool, 1.2" (30 mm)
opening, 120 V Charger
12-Ton Battery-Powered Crimping Tool, 1.2" (30 mm)
opening, 12 V Charger
12-Ton Battery-Powered Crimping Tool, 1.2" (30 mm)
opening, 230 V Charger
12-Ton Crimping Tool w/120V AC Adapter
12-Ton Crimping Tool w/230V AC Adapter
12-Ton Battery-Powered Crimping Tool, 1.65" (42 mm)
opening, 120 V Charger
12-Ton Battery-Powered Crimping Tool, 1.65" (42 mm)
opening, 12 V Charger
12-Ton Battery-Powered Crimping Tool, 1.65" (42 mm)
opening, 230 V Charger
12-Ton Crimping Tool w/120V AC Adapter
12-Ton Crimping Tool w/230V AC Adapter
12-Ton Battery-Powered Crimping Tool, 1.65" (42 mm)
opening, PVC covered, 120 V Charger
12-Ton Battery-Powered Crimping Tool, 1.65" (42 mm)
opening, PVC covered, 12 V Charger
12-Ton Battery-Powered Crimping Tool, 1.65" (42 mm)
opening, PVC covered, 230 V Charger
12-Ton Crimping Tool w/120V AC Adapter
12-Ton Crimping Tool w/230V AC Adapter
12-Ton Battery-Powered Crimping Tool, Kearney head,
120 V Charger
12-Ton Battery-Powered Crimping Tool, Kearney head,
12 V Charger
12-Ton Battery-Powered Crimping Tool, Kearney head,
230 V Charger
12-Ton Crimping Tool w/120V AC Adapter
18V 3.0 Ah Li-ion Battery
EK1230L & EK1240L Carrying Case
Carrying Strap
120V Charger
12V Charger
230V Charger
www.greenlee.com
12-Ton Manual Hydraulic Crimping Tools
HK1230
HK1240C
SPECIFICATIONS
Capacity*
Crimping Force
Length
Weight
HK1230 & HK1240 –8 AWG to 750 kcmil copper
color-coded lugs and splices.
See crimping tool capacity chart on pg. 196;
24,000 lbs (106 kN)
HK1230 – 20-3/8" (518 mm);
HK1240 – 21-1/2" (546 mm);
HK1230 – 12.2 lbs (5.5 kg)
HK1240 – 13.2 lbs (6.0 kg)
Cat. No.
UPC No. Description
HK1230
HK1230C
06426
07199
HK1240
HK1240C
06427
07202
12-Ton Hydraulic Crimping Tool, 1.2" (30 mm) opening
12-Ton Hydraulic Crimping Tool, 1.2" (30 mm) opening,
PVC covered
12-Ton Hydraulic Crimping Tool, 1.65" (42 mm) opening
12-Ton Hydraulic Crimping Tool, 1.65" (42 mm) opening,
PVC covered
Wire & Cable Termination
HK1240
• Two crimping head choices: HK1230 with 1.20" (30 mm) opening, and
HK1240 with 1.65" (42 mm) opening.
• Both heads accept Greenlee KC12, KA12 and KD12 crimping dies as well
as industry "U" style dies.
• New head designs result in lower weight and improved durability –
tested to 50,000 crimp cycles.
• Two-speed pump to reduce cycle time.
• Ram automatically retracts when crimp cycle is complete
– a Greenlee exclusive.
• Crimping heads rotate 360°.
• Smaller and lighter than competitive tools.
• Covered head models have two layers of PVC that total approximately
3/16" (4.8 mm) thick. The outer layer is black and the inner layer is red.
• Includes carrying case.
• U.S. Patent #6,206,663.
Crimping dies on page 212
*HK1230 and HK1240 are UL and cUL classified with Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Penn-Union and Thomas & Betts copper and aluminum
color-coded lugs and splices when used with Greenlee KC12 and KA12 crimping dies. The products listed above are registered trademarks of Anderson®,
Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
Capacity
*
UPC No.
Description
HKL1232
23521
12-Ton Hydraulic Crimping Tool, 1.4" (32 mm)
opening
*UL and cUL is classified with Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Penn-Union and Thomas & Betts copper and aluminum color-coded lugs and
splices when used with Greenlee KC12 and KA12 crimping dies. The products listed above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®,
ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
= new product
= Replacement Part
= Accessory
201
INTERNATIONAL
Crimping dies on page 212
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Crimping Force
Length
8 AWG to 750 kcmil copper color-coded lugs
and splices.
See crimping tool capacity chart on page 196
for additional capacities.
24,000 lbs (106 kN)
24-1/4" (616 mm)
Cat. No.
CANADA
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.524.2853
Two-speed ram advances fast and shifts to lower speed to complete the crimp.
Strong, lightweight fiberglass handles.
Push button permits dies to be inserted and removed easily.
The “C” style head has a 1.4" (32 mm) opening for easy placement
on connectors.
• Tool is supplied in a durable, molded plastic carrying case.
• Accepts Greenlee KC12, KA12 and KD12 as well as Industry
“U” style dies.
Tel: 800.435.0786
Fax: 800.451.2632
•
•
•
•
USA
12-Ton Manual Hydraulic Crimping Tool
MADE FOR THE TRADE!™
12-Ton Remote-Powered Crimping Heads
Wire & Cable Termination
RK1240
RK1240C
SPECIFICATIONS
Capacity*
Crimping Force
Length
Weight
Max. Operating
Pressure
8 AWG to 750 kcmil copper color-coded lugs and
splices. See crimping tool capacity chart on pg.
196 for additional capabilities
24,000 lbs (106 kN)
11-7/8" (302 mm)
RK1240 – 9.7 lbs. (4.4 kg)
10,000 psi (700 bar)
• Use Greenlee KC12, KA12 and KD12 crimping dies as well as
industry “U” type dies
• Crimping head has 1.65" (42 mm) opening.
• New head designs result in lower weight and improved durability
– tested to 50,000 crimp cycles.
• Boss included on each crimping head for use with hotsticks.
• Easy to get into tight locations, light weight makes them excellent choices
for hotstick use.
• Single-acting tools require an external hydraulic pump capable of
10,000 psi (700 bar).
• Equipped with a 3/8" male screw-type coupler.
• Capable of crimping a wide range of lugs, C-taps, H-taps and overhead
tension sleeves.
• Covered head models have two layers of PVC that total approximately
3/16" (4.8 mm) thick. The outer layer is black and the inner layer is red.
• Includes carrying case.
• See pages 430- 433 for hydraulic hose and pump selection.
Cat. No.
UPC No.
Des cription
RK1240
05351
RK1240C
07205
12-Ton Remote-Powered Crimping
Head, 1.65" (42 mm) opening
12-Ton Remote-Powered Crimping
Head, 1.65" (42 mm) opening,
PVC covered
Crimping dies on page 212
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
*RK1240 are UL and cUL classified with Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Penn-Union and Thomas & Betts copper and
aluminum color coded lugs and splices when used with Greenlee KC12 and KA12 crimping dies. The products listed above are registered trademarks of Anderson®,
Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
202
www.greenlee.com
Gator® Battery-Powered 15-Ton Crimping Tool
EK1550L11
• Interchangeable adapters permit the use of a wide variety of
crimping dies. Accepts Kearney PH4/P14 dies without adapter.
• Assist handle is included to provide better balance for the tool
description
Capacity
Color-coded copper lugs and splices, 8
AWG to 1000 kcmil (MCM). Color-coded
aluminum lugs and splices, 8 AWG to
1000 kcmil (MCM).
30,000 lb (134 kN)
19-5/8" (498 mm)
15" (381 mm)
19 lbs. (8.5 kg)
18 V, 3.0 Ah, Li-ion
1 hour
50
EK1550L11
EK1550L12
EK1550L22
EK1550L120
52150
52151
52152
52152
EK1550L230
52154
48820
48788
48802
48820
48788
48802
48824
12274
52176
10118
52178
52179
52180
48824
12274
52176
10118
52178
52179
52180
15-Ton Battery-Powered Crimping Tool w/120 V charger
15-Ton Battery-Powered Crimping Tool w/12 V charger
15-Ton Battery-Powered Crimping Tool w/230 V charger
15-Ton Battery-Powered Crimping Tool w/120 V AC
Adapter
15-Ton Battery-Powered Crimping Tool w/230 V AC
Adapter
Die Adapters - Burndy P dies (Y46), Ilsco ILD-P dies
Die Adapters - T&B 15600 dies, Blackburn 15600 dies
Die Adapters - Greenlee 12-Ton dies, Burndy 12-Ton dies,
Ilsco ILD dies, T&B 15500 dies, Blackburn 15500 dies
Die Adapters - Kearney PH2/WH2
Carrying Strap
18 V, 3.0 Ah, Li-ion Battery
Carrying Case
120V Charger
12V Charger
230V Charger
Crimping Force
Length
Height
Weight
Battery
Battery Charge Time
Est, Cycles per Charge
*EK1550L tools are UL and cUL classified with Anderson, Blackburn, Burndy,
ILSCO, Panduit, Penn-Union and Thomas & Betts copper and aluminum color
coded lugs and splices when used with 48802 die adapters and with Greenlee
KC12 and KA12 crimping dies. The products listed above are registered
trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, PennUnion® and Thomas & Betts®.
= Replacement Part
= Accessory
203
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
upc no.
USA
cat. no.
Tel: 800.435.0786
Fax: 800.524.2853
battery powered
Tel: 800.435.0786
Fax: 800.451.2632
specifications
Wire & Cable Termination
• Intelligent Crimping System Technology includes a pressure sensor that
monitors the crimping force of each crimp and provides the operator a visual
and audible alert if the force is below specifications.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per
charge and faster cycle times.
• Automatic Retraction Stop (ARS) which retracts the ram just enough to get
ready for the next cycle saving time and energy.
• LED light provides the operator with the battery charge and tool maintenance
status.
• Two-stage hydraulic system provides fast advance and power speeds,
saving time.
• Forward handle position improves tool balance.
• One trigger controls all tool functions.
• Crimping head rotates 350O
• Tools automatically retract when the crimping cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life
• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded
adapter in place of batteries and charger
MADE FOR THE TRADE!™
Wire & Cable Termination
15-Ton Crimping Tool
• Interchangeable adapters permit the use of a wide variety of die types
for all common crimping applications.
• Accepts Kearney PH4/PH14 dies without adapters.
• Zinc-plated head resists corrosion better than other finishes.
• Hot stick attachment point is standard.
• Operates with most 10,000 psi (700 bar) hydraulic sources.
• Equipped with 3/8" male screw-type 10,000 psi (700 bar) coupler.
• Includes carrying case.
• See pages 430- 433 for hose and pump selection.
SPECIFICATIONS
Capacity*
Crimping Force at 10,000
psi (700 bar)
Length
Width
Height
Weight
Operating Pressure
Color-Coded copper lugs and splices: #8
to 1500 kcmil (MCM) Color-Coded
aluminum lugs and splices: #8 to 1000
kcmil (MCM) For other connector types,
see the capacity chart on page 196
30,000 lbs (133 kN)
Cat. No.
UPC No. Description
RK1550
48820
48788
48802
05353
48820
48788
48802
48824
48824
15-Ton Single-Acting Remote-Powered Crimping Tool
Die Adapters – Burndy P dies (Y46), llsco ILD-P dies
Die Adapters – T&B 15600 dies, Blackburn 15600 dies
Die Adapters – Greenlee U dies, Burndy U dies,
llsco ILD dies, T&B 15500 dies, Blackburn 15500 dies
Die Adapters – Kearney PH2/WH2 dies
15" (380 mm);
3" (76 mm)
5-3/8" (135 mm)
14.1 lbs. (6.4 kg)
10,000 psi (700 bar)
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
*UL and cUL classified with Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Penn-Union and Thomas & Betts copper and aluminum color-coded lugs and splices
up to 750kcmil using 48802 die adapters when used with Greenlee KC12 and KA12 crimping dies. The products listed above are registered trademarks
of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
204
Crimping Tool 8-1 AWG
• Small size and light weight make this an ideal tool for crimping small
lugs and splices.
• Easily fits in tool pouches.
• Full-cycle mechanism assures that crimps are complete.
• Jaws can be opened in mid-cycle if necessary to adjust connector.
• Wide grips make crimping easy on the hands.
Cat. No.
UPC No.
Description
K111
10763
Crimping Tool
SPECIFICATIONS
Capacity*
Length
Weight
8 AWG – 1 AWG copper color-coded connectors
10" (273 mm)
1.4 lbs. (0.6 kg)
*UL and cUL classified with Anderson, Blackburn, Burndy, ILSCO, Panduit, Penn-Union and Thomas & Betts copper color-coded connectors.
The products listed above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
www.greenlee.com
K-Series Crimping Tool 8-1/0 AWG
• Crimps smaller copper connectors.
• Small, light weight, easy to handle.
• Easy to get in tight locations.
• Color-coded, hexagonal rotating dies.
• Full cycle mechanism releases only after full crimp cycle is completed.
UPC No.
Description
SPECIFICATIONS
K05-1GL
K05-1SPGL
02694
02624
02625
02694
Crimping Tool
Crimping Tool, full cycle mechanism
Die Set
Capacity*
Length
Weight
8 AWG – 1/0 AWG Copper
15.4" (390 mm)
2.4 lbs. (1.1 kg)
*UL and cUL classified with Anderson, Blackburn, Burndy, ILSCO, Panduit, Thomas & Betts and Penn-Union copper connectors.
The products listed above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
K-Series Crimping Tool 8-4/0 AWG
• Crimps all the popular small to mid-range copper connector sizes.
• Long length results in low handle efforts.
• Color-coded, hexagonal rotating dies.
• Full cycle mechanism releases only after full crimp cycle is completed.
Cat. No.
UPC No. Description
SPECIFICATIONS
K09-2GL
K09-2SPGL
02912
02628
02629
02912
Capacity*
Length
Weight
Crimping Tool
Crimping Tool, full cycle mechanism
Die Set
8 AWG – 4/0 AWG Copper
25.5" (650 mm)
6.4 lbs. (2.9 kg)
Wire & Cable Termination
Cat. No.
*UL and cUL classified with Anderson, Blackburn, Burndy, ILSCO, Panduit, Thomas & Betts and Penn-Union copper connectors.
The products listed above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
K-Series Crimping Tool 3/0-400
• Crimps the larger copper connector sizes all the way to 400 kcmil (MCM).
• Color-coded, hexagonal rotating dies.
UPC No.
Description
K09-3GL
02913
02630
02913
Crimping Tool
Die Set
3/0 AWG – 400 kcmil (MCM) Copper
25.5" (650 mm)
6.4 lbs. (2.6 kg)
*UL classified and CSA certified with Anderson, Blackburn, Burndy, ILSCO, Panduit, Thomas & Betts and Penn-Union copper connectors.
The products listed above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
Description
K425O
K425BG
K425K58
02064
02065
08160
K425KO
08161
Crimping Tool with D³ and O die grooves
Crimping Tool with D³ and BG die grooves
Crimping Tool with Kearney® O and
5/8 die grooves
Crimping Tool with Kearney® D and
O die grooves
= new product
= Replacement Part
= Accessory
SPECIFICATIONS
Capacity*
Crimping Force
Length
Weight
See capacity chart on page 196
9,000 lb. (40 kN)
25-3/8" (645 mm)
7.1 lbs. (3.2 kg)
205
INTERNATIONAL
UPC No.
CANADA
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
K425BG
• Designed for crimping a wide range of overhead service entrance connections,
overhead splices, and overhead taps.
• Easy-to-use MD-6 type “pop” tool.
• K425 tools are equipped with D³ die groove and either “BG” or “O” die groove.
• K425K tools are equipped with a die groove for Kearney® “O” dies and either
a 5/8" or “O” die groove
• The D³ die groove serves as a die seat for all Greenlee KD6 and industry
“W” type dies. Page 211.
• Bent fiberglass handles provide a solid grip, good leverage and better
durability than wood.
• Teflon-impregnated bushings at pivot joints provide smooth operation
and long life.
• Complete crimps are assured with an over-center cam mechanism.
• Tool can easily be checked visually for proper adjustment and can be
adjusted with Allen wrenches.
Tel: 800.435.0786
Fax: 800.524.2853
Manual Crimping Tool
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
Capacity*
Length
Weight
USA
SPECIFICATIONS
MADE FOR THE TRADE!™
DIELESS CRIMPING
Wire & Cable Termination
Gator® Battery-Powered Quad-Point Dieless Crimping Tools
EK06ATL
DIELESS
.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
EK06FTL
206
specifications
*
Capacity
Crimping Force
Length
Weight
Battery
Battery Charge Time
battery powered
See crimping tool capacity chart on page 196
12,400 lbs (55 kN)
EK06ATL & EK06ATCL – 14"(355 mm)
EK06FTL – 14-7/8" (378 mm)
EK06ATL & EK06ATCL – 12 lbs. (5.4 kg)
EK06FT – 11 lbs. (5 kg)
18V 3.0 Ah Li-ion
1 hour
• Intelligent Crimping System Technology includes a pressure sensor that
monitors the crimping force of each crimp and provides the operator a visual
and audible alert if the force is below specifications.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per
charge and faster cycle times.
• Automatic Retraction Stop (ARS) which retracts the ram just enough to get
ready for the next cycle saving time and energy.
• LED light provides the operator with the battery charge and tool maintenance
status.
• Two-stage hydraulic system provides fast advance and power speeds, saving
time.
• Forward handle position improves tool balance.
• One trigger controls all tool functions.
• Crimping head rotates 350°
• Tools automatically retract when the crimping cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life.
• Utilizes four indentors to make the crimp.
• Flip-top style uses a pull pin to open head for easy removal from the
connector.
• U.S. Patents #6,206,663 and #6,065,326
• Available with 120V, 12V or 230V battery charger or with 120V or 230V
corded adapter in place of batteries and charger.
cat. no.
upc no.
description
EK06ATL11
52053
EK06ATL12
52054
EK06ATL22
52055
EK06ATL120
EK06ATL230
EK06ATCL11
52056
52057
52058
EK06ATCL12
52059
EK06ATCL22
52060
EK06ATCL120
EK06ATCL230
EK06FTL11
52061
52062
52063
EK06FTL12
52064
EK06FTL22
52065
EK06FTL120
EK06FTL230
52176
10118
12274
52178
52179
52180
52066
52067
52176
10118
12274
52178
52179
52180
Quad-Point Battery-Powered Crimping Tool, Open Head
Dieless, 120 V Charger
Quad-Point Battery-Powered Crimping Tool, Open Head
Dieless, 12 V Charger
Quad-Point Battery-Powered Crimping Tool, Open Head
Dieless, 230 V Charger
Quad-Point Crimping Tool w/120V AC Adapter
Quad-Point Crimping Tool w/230V AC Adapter
Quad-Point Battery-Powered Crimping Tool, Open Rubber
Covered Head Dieless,
120 V Charger
Quad-Point Battery-Powered Crimping Tool, Open Rubber
Covered Head Dieless, 12 V Charger
Quad-Point Battery-Powered Crimping Tool, Open Rubber
Covered Head Dieless, 230 V Charger
Quad-Point Crimping Tool w/120V AC Adapter
Quad-Point Crimping Tool w/230V AC Adapter
Quad-Point Battery-Powered Crimping Tool, Flip-Top Head
Dieless, 120 V Charger
Quad-Point Battery-Powered Crimping Tool, Flip-Top Head
Dieless, 12 V Charger
Quad-Point Battery-Powered Crimping Tool, Flip-Top Head
Dieless, 230 V Charger
Quad-Point Crimping Tool w/120V AC Adapter
Quad-Point Crimping Tool w/230V AC Adapter
18V 3.0 Ah Li-ion
Carrying Case
Carrying Strap
120V Charger
12V Charger
230V Charger
*FT tools are UL and cUL classified with #4AWG – 750 kcmil (MCM) copper color-coded connectors and #6AWG – 750 kcmil (MCM) aluminum color-coded
connectors of the following brands: Anderson, Blackburn, FCI Burndy, Ilsco, Panduit, Penn-Union, and Thomas & Betts.
AT tools are UL and cUL classified with #4 – 500 kcmil (MCM) copper color-coded connectors of the following brands: Anderson, Blackburn, FCI Burndy, ILSCO,
Panduit, Penn-Union, & Thomas & Betts.
The products listed above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
www.greenlee.com
Manual Hydraulic Quad-Point Dieless Crimping Tools
Cat. No.
UPC No.
Description
HK06AT
06065
HK06FT
06196
Hydraulic Quad-Point Crimping Tool,
Open Head Dieless
Hydraulic Quad-Point Crimping Tool,
Flip-Top Dieless
HK06FT
SPECIFICATIONS
Capacity*
Length
Weight
See crimping tool capacity chart on page 196.
HK06AT – 20-3/4" (525 mm)
HK06FT – 21-1/16" (535 mm)
9.0 lbs. (4.1 kg)
Wire & Cable Termination
HK06AT
• Utilizes four indentors to make the crimp.
• Two-speed pump advances the ram quickly to start the crimp, reducing
crimp completion time. The ram automatically retracts after the crimp is
complete.
• Flip-top style uses a pull pin to open head for easy removal from the
connector.
• Compact, featuring a 360° rotating head.
• Includes carrying case, test gauge and test slugs.
• U.S. Patents #6,206,663 and #6,065,326.
*FT tools are UL and cUL classified with #4AWG – 750 kcmil (MCM) copper color-coded connectors and #6AWG – 750 kcmil (MCM) aluminum color-coded
connectors of the following brands: Anderson, Blackburn, FCI Burndy, Ilsco, Panduit, Penn-Union, and Thomas & Betts.
AT tools are UL and cUL classified with #4 – 500 kcmil (MCM) copper color-coded connectors of the following brands: Anderson, Blackburn, FCI Burndy, ILSCO,
Panduit, Penn-Union, & Thomas & Betts.
The products listed above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
Quad-Point Dieless Remote-Powered Crimping Heads
Description
06066
RK06FT
06197
Remote Powered Quad-Point Crimping
Tool, Open Head Dieless
Remote Powered Quad-Point Crimping
Tool, Flip-Top Head Dieless
SPECIFICATIONS
*FT tools are UL and cUL classified with #4AWG – 750 kcmil (MCM) copper color-coded connectors and #6AWG – 750 kcmil (MCM) aluminum color-coded
connectors of the following brands: Anderson, Blackburn, FCI Burndy, Ilsco, Panduit, Penn-Union, and Thomas & Betts.
AT tools are UL and cUL classified with #4 – 500 kcmil (MCM) copper color-coded connectors of the following brands: Anderson, Blackburn, FCI Burndy, ILSCO,
Panduit, Penn-Union, & Thomas & Betts.
The products listed above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
= new product
= Replacement Part
= Accessory
207
INTERNATIONAL
See crimping tool capacity chart on page 196.
6.2 tons (55 kN)
RK06AT – 10" (254 mm); RK06FT – 10-1/2" (267 mm)
6.2 lbs. (2.8 kg)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Capacity*
Crimping Force
Length
Weight
RK06AT
CANADA
UPC No.
RK06AT
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
USA
RK06FT
Tel: 800.435.0786
Fax: 800.451.2632
• Utilizes four indentors to make the crimp.
• Operates from 10,000 psi (700 bar) hydraulic pumping sources.
• Small and lightweight for difficult-to-reach locations.
• Equipped with 3/8 in. male screw-type couplers.
• Flip-top style uses a pull pin to open head for easy removal from
the connector.
• Includes carrying case, test gauge and test slugs.
• See pages 430-433 for hose and pump selection.
MADE FOR THE TRADE!™
Wire & Cable Termination
Gator® Dieless Crimping Tools
EK12IDL
DIELESS
SPECIFICATIONS
EK12IDL
Length
16 1/2" (420 mm)
Height
14 1⁄2" (368 mm)
Weight
15 lbs (6.8 kg)
Battery 18V 3.0 Ah Li-ion
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Battery Charge Time: 1 hour
208
Capacity*
• Copper Color Coded Lugs and Splices: 4 AWG to 1000 kcmil*
• Aluminum Color Coded Lugs and Splices: 6 AWG to
1000 kcmil*
• Dieless indent style crimping head does not require interchangeable
crimping dies.
• Intelligent Crimping System Technology includes a pressure sensor that
monitors the crimping force of each crimp and provides the operator a visual
and audible alert if the force is below specifications.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per
charge and faster cycle times.
• Automatic Retraction Stop (ARS) which retracts the ram just enough to get
ready for the next cycle saving time and energy.
• LED light provides the operator with the battery charge and tool maintenance
status.
• Two-stage hydraulic system provides fast advance and power speeds, saving
time.
• Forward handle position improves tool balance.
• One trigger controls all tool functions.
• Crimping head rotates 350°
• Tools automatically retract when the crimping cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more
comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery
temperature to maximize battery life.
• Flip open crimping head will allow crimping of 4 AWG - 1000 kcmil copper or
6 AWG - 1000 kcmil aluminum with no dies to change.
• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded
adapter in place of batteries and charger
Cat. No.
UPC No.
Description
EK12IDL11
EK12IDL12
EK12IDL22
EK12IDL120
EK12IDL230
12274
52178
52179
52180
52176
10118
52048
52049
52050
52051
52052
12274
52178
52179
52180
52176
10118
Battery-Powered Dieless Crimping Tool, 115 V Battery Charger
Battery-Powered Dieless Crimping Tool, 12 V Battery Charger
Battery-Powered Dieless Crimping Tool, 230 V Battery Charger
Crimping Tool w/120V AC Adapter
Crimping Tool w/230V AC Adapter
Carrying Strap
120V Charger
12V Charger
230V Charger
18V 3.0 Ah Li-ion Battery
EK12IDL Carrying Case
*UL and cUL classified with Anderson®, Blackburn®, Burndy®, ILSCO®, Panduit®, Thomas & Betts®, Penn-Union® and Tyco® color-coded connectors.
The products listed above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts® and Tyco®.
Hand Hydraulic Dieless Crimping Tool
• Dieless indent style crimping head does not require interchangeable
crimping dies
• Flip-open Crimping head rotates 350° to get into tight locations
• Two-speed pump provides rapid crimping cycle time.
• Lightweight and strong fiberglass handles
• Comes with a molded carrying case
Cat. No.
UPC No.
Description
HK12ID
10107
Dieless Hydraulic Crimping Tool
SPECIFICATIONS
Capacity*
Length
Weight
Copper – 4 AWG - 1000 kcmil (MCM)
Aluminum – 6 AWG - 1000 kcmil (MCM)
26" (657 mm)
15 lbs. (7 kg)
*UL and cUL classified with Anderson®, Blackburn®, Burndy®, ILSCO®, Panduit®, Thomas & Betts®, Penn-Union® and Tyco® color-coded connectors.
The products listed above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts® and Tyco®.
www.greenlee.com
Dieless Crimping Tool to 1000 kcmil (MCM)
Cat. No.
UPC No.
Description
1990
32891
32489
32891
Dieless Crimping Tool to 1000 kcmil (MCM)
Pressure Test Kit includes 30 test slugs and gauge
SPECIFICATIONS
Capacity*
*UL and cUL classified for use with Anderson, Blackburn, FCI Burndy, ILSCO,
Panduit, Penn-Union and Thomas & Betts copper color-coded connectors
4 AWG-1000 kcmil (MCM) and aluminum color-coded connectors 6 AWG-1000
kcmil (MCM). The products listed above are registered trademarks of Anderson®,
Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
Copper – #4 AWG - 1000 kcmil (MCM)
Aluminum – # 6 AWG - 1000 kcmil (MCM)
For use with connectors up to a maximum of 1.815" (46.10 mm)
diameter
26.5" (673 mm)
16.5 lbs. (7.5 kg)
Length
Weight
Utility Dieless Crimping Tool
UPC No.
Description
44999
32891
44999
32891
Utility Dieless Crimping Tool
Pressure Test Kit includes 30 test slugs and gauge
Indentor Crimping Tool
Copper – 1/0 - 1000 kcmil (MCM)
Aluminum – 1/0 - 1000 kcmil (MCM)
For use with connectors up to a maximum of 1.895" (48 mm) diameter
16.5 lbs. (7.5 kg)
Weight
UPC No.
Description
1981
06894
Indentor Crimping Tool
SPECIFICATIONS
Capacity*
Length
Weight
Copper color-coded connectors: 8 AWG-250 kcmil (MCM)
Aluminum color-coded connectors: 8 AWG-4/0 kcmil (MCM)
22-3/8" (568 mm)
6.8 lbs. (3.1 kg)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
*UL and cUL classified for use with Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Penn-Union, and Thomas & Betts copper and aluminum color-coded lugs and splices.
The products listed above are registered trademarks of Anderson®, Blackburn®, FCI Burndy®, ILSCO®, Panduit®, Penn-Union® and Thomas & Betts®.
= new product
= Replacement Part
= Accessory
209
INTERNATIONAL
• Simple screw adjustment for connector size.
• Forged body and handle for durability.
Tel: 800.435.0786
Fax: 800.524.2853
Capacity*
CANADA
SPECIFICATIONS
USA
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Self-contained hydraulic crimper/press designed to crimp compression
sleeves and lugs in underground applications.
• Dieless crimping head; no dies to lose or replace.
• Automatic pressure setting, easy to use.
• Two-speed pump for rapid ram advance, 15 ton (133.4 kN) maximum
crimping force.
• Hinged head opens for easy loading and unloading.
• Head rotates 180°.
• Includes Pressure Test Kit and carrying case.
Wire & Cable Termination
• Dieless crimping head; no dies to lose or replace.
• Patented pressure system automatically changes crimping force
for each connector size/type. Eliminates errors.
• Seven indent profile requires fewer crimps per connector.
• Automatic two-speed pump for rapid advance.
• 15 ton (133.4 kN) maximum crimping force.
• Swivel head rotates 180° for maximum flexibility.
• Hinged head for easy connector loading and unloading.
• Includes Pressure Test Kit and carrying case.
• Not for use with “C” and “H” taps.
MADE FOR THE TRADE!™
CRIMPING DIES
Crimping Dies for 4-Ton EK410L Tools
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Cat. No. UPC No. Description
KC4CU
02037 Complete Die Set for copper connectors. Includes dies for 8 AWG to
300 kcmil (MCM) copper connectors. (Dies can be stored in tool
carrying case.)
KA4AL
12237
Complete die set for aluminum connectors. Includes dies for 8 AWG
through 2/0 AWG. (Dies can be stored in tool carrying case.)
KC4 Dies for service entrance connectors
cat. no.
upc no.
description
KD4-10 02021 Crimping Dies for 5/8" Service Entrance Connectors
KD4-840 02022 Crimping Dies for 840 Service Entrance Connectors
24163
24163 Blank Crimping Dies
Dies for Crimping Color-Coded Copper & Aluminum Lugs & Splices*
Aluminum
Cable Size
Cat. No. UPC no.
8 AWG
KA4-8
12222
Color
Blue
Copper
Cat. No. UPC no.
KC4-8
02075
Color
Red
6 AWG
KA4-6
12223
Gray
KC4-6
02076
Blue
4 AWG
KA4-4
12225
Green
KC4-4
02077
Gray
2 AWG
KA4-2
12226
Pink
KC4-2
02078
Brown
1 AWG
KA4-1
12227
Gold
KC4-1
02079
Green
1/0 AWG
KA4-1/0
12228
Tan
KC4-1/0
02080
Pink
2/0 AWG
KA4-2/0
12229
Olive
KC4-2/0
02081
Black
3/0 AWG
—
—
—
KC4-3/0
02082
Orange
4/0 AWG
—
—
—
KC4-4/0
02083
Purple
250 kcmil (MCM)
—
—
—
KC4-250
02084
Yellow
300 kcmil (MCM)
—
—
—
KC4-300
10988
White
*Note: Connections are UL and cUL classified for copper and aluminum when used with Anderson, Blackburn, FCI Burndy, ILSCO, Panduit, Thomas & Betts and Penn-Union color-coded lugs and splices.
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Wire & Cable Termination
4-ToN Crimping die Kit*
210
www.greenlee.com
Crimping Dies for 6-Ton Tools
All dies on this page for use with EK628L, ECCXL, and EK622L tools.
6-ToN Crimping Kits*
Dies for Crimping Color-Coded Copper & Aluminum Lugs & Splices*
(Require UA22 adapter when used with ECCXL, HCCX, & RCCX tools)
22 Series Crimping Dies
Aluminum
Cable Size
Cat. No. UPC no.
8 AWG
KA22-8
06744
Color
Blue
Copper
Cat. No. UPC no.
KC22-8
03079
Color
Red
KC22-6
03080
Blue
Green
KC22-4
03081
Gray
2 AWG
KA22-2
06747
Pink
KC22-2
03082
Brown
1 AWG
KA22-1
06749
Gold
KC22-1
03083
Green
1/0 AWG
KA22-1/0
06750
Tan
KC22-1/0
03084
Pink
2/0 AWG
KA22-2/0
06751
Olive
KC22-2/0
03085
Black
3/0 AWG
KA22-3/0
06752
Ruby
KC22-3/0
03086
Orange
4/0 AWG
KA22-4/0
06753
White
KC22-4/0
03087
Purple
250 kcmil (MCM)
KA22-250
06754
Red
KC22-250
03088
Yellow
300 kcmil (MCM)
KA22-300
06755
Blue
KC22-300
03089
White
350 kcmil (MCM)
KA22-350
06756
Brown
KC22-350
03090
Red
400 kcmil (MCM)
—
—
—
KC22-400
03091
Blue
500 kcmil (MCM)
—
—
—
KC22-500
03092
Brown
600 kcmil (MCM)
—
—
—
KC22-600B
03094
Green
*Note: Connections are UL and cUL classified for copper and aluminum, when used with Greenlee tools on Anderson , Blackburn , FCI Burndy®,
ILSCO®, Panduit®, Thomas & Betts® and Penn-Union® color-coded lugs and splices.
®
®
Cat. No. UPC no. burndy no.
KD6-10
10165
W-BG
Cat. No. UPC no. burndy no.
KD6-18
10173
W-166
KD6-11
10166
W-O
KD6-19
10174
W-243
KD6-12
10167
W-C
KD6-20
10175
W-247
KD6-13
10168
W-K840
KD6-21
10176
W-249
KD6-14
10169
W-161
KD6-22
10177
W-164
KD6-15
10170
W-162
KD6-24
10179
W-237
KD6-16
10171
W-163
KD6-25
10180
W-239
KD6-17
10172
W-165
KD6-27
10182
W-28K
= new product
= Replacement Part
= Accessory
Tel: +1.815.397.7070
Fax: +1.815.397.9247
“W”-Style dies
211
INTERNATIONAL
Dies for use with service entrance connectors, c-taps, h-taps, overhead and
underground connectors (Require UAW adapter when used with ECCXL tools, Requires CJD3,
CJD3BG, or CJD30 jaws when used with EK628L tools)
CANADA
Gray
06746
USA
06745
KA22-4
Tel: 800.435.0786
Fax: 800.524.2853
KA22-6
4 AWG
Tel: 800.435.0786
Fax: 800.451.2632
6 AWG
Wire & Cable Termination
Cat. No. UPC No. Description
K22S1GL
03078 Die Kit for 8 AWG to 600 kcmil Copper Connectors –
Includes all copper die sets listed below and
carrying case
KD06AL
01631 Die Kit for 8 AWG to 350 kcmil Aluminum Connectors –
Includes all aluminum die sets listed below and
carrying case
MADE FOR THE TRADE!™
Crimping Dies for 12-Ton Tools
All dies on this page for use with EK1230L, EK1240L, HK1230, HK1240,
RK1240, HKL1232, and E12CCX tools, and RK1550 equipped with 48802 die
adapter.
12-ToN Crimping Kits
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Wire & Cable Termination
“U” style Die Kits
212
Cat. No. UPC No. Description
KD12CU
10260 Die Kit for 6 AWG to 750 kcmil Copper Connectors –
Includes all copper die sets below except KC12-8
KD12AL
10261 Die Kit for 6 AWG to 750 kcmil Aluminum Connectors –
Includes all aluminum die sets below except 35776.
Dies for Crimping Color-Coded Copper & Aluminum Lugs & Splices
“U” Style Dies
Aluminum**
Cable Size
CAT No. UPC no.
8 AWG
KA12-8
22084
Color
Blue
Copper*
CAT No. UPC no.
KC12-8
10996
Color
Gray
6 AWG
KA12-6
22085
Gray
KC12-6
10997
Blue
4 AWG
KA12-4
22086
Green
KC12-4
10998
Gray
2 AWG
KA12-2
22087
Pink
KC12-2
10999
Brown
1 AWG
KA12-1
22088
Gold
KC12-1
11003
Green
1/0 AWG
KA12-1/0
22089
Tan
KC12-1/0
11004
Pink
2/0 AWG
KA12-2/0
22090
Olive
KC12-2/0
11007
Black
3/0 AWG
KA12-3/0
22121
Ruby
KC12-3/0
11010
Orange
4/0 AWG
KA12-4/0
22122
White
KC12-4/0
11011
Purple
250 kcmil (MCM)
KA12-250
22123
Red
KC12-250
11012
Yellow
300 kcmil (MCM)
KA12-300
22124
Blue
KC12-300
11013
White
350 kcmil (MCM)
KA12-350
22125
Brown
KC12-350
11014
Red
400 kcmil (MCM)
KA12-400
22126
Green
KC12-400
11015
Blue
500 kcmil (MCM)
KA12-500
22127
Pink
KC12-500
11016
Brown
600 kcmil (MCM)
KA12-600
22128
Black
KC12-600
11018
Green
750 kcmil (MCM)
KA12-750
22129
Yellow
KC12-750
11020
Black
*Connections are UL and cUL classified for copper connectors when used with Greenlee tools on Anderson®, Blackburn®, FCI Burndy®,
ILSCO®, Panduit®, Thomas & Betts® and Penn-Union® color-coded lugs and splices.
**Connections are UL and cUL classified for aluminum connectors when used with Greenlee tools on Anderson®, Blackburn®, FCI Burndy®,
ILSCO®, Panduit®, Thomas & Betts® and Penn-Union® color-coded lugs and splices.
Dies for use with service entrance connectors, c-taps, h-taps, overhead and
underground connectors
Additional “U”-Style dies
Cat. No. UPC no. burndy no.
KD12-10
10188
U-BG
Cat. No. UPC no. burndy no.
KD12-30
10200
U-D3
KD12-11
10189
U-O
KD12-32
10202
U-F
KD12-12
10190
U-C
KD12-33
10203
U-997
KD12-14
10192
U-161
KD12-35
10205
U-238
KD12-15
10193
U-162
KD12-36
10206
U-654
KD12-17
10195
U-165
KD12-37
10207
U-655
KD12-18
10196
U-166
KD12-38
10208
U-658
KD12-19
10197
U-243
KD12-39
10209
U-659
KD12-20
10198
U-247
KD12-40
10210
U-998
KD12-21
10199
U-249
KA12-500
KC12-250
www.greenlee.com
ACCESSORIES
Crimping Die Carrying Case
• Holds 15 KC22, KA22, KC12, KA12 or “U” style crimping die sets.
UPC No.
Description
01082
01082
Crimping Die Carrying Case (dies not included)
Crimping Tool Load Cell
Wire & Cable Termination
Cat. No.
• Test gauge measures the force output of Greenlee 1230 and 1240
crimping tools.
• Includes test gauge and blank die set.
Cat. No.
UPC No.
Description
35887
35887
Crimping Tool Load Cell – 12 Ton
213
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Accessory
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
= Replacement Part
USA
Tel: 800.435.0786
Fax: 800.451.2632
= new product
MADE FOR THE TRADE!™
Crimping Tool Test Meter
Wire & Cable Termination
• Electronically measures the force output of crimping tools.
• Data can be transferred to computer files to develop tool histories.
• To take measurements, one TC1KIT, one tool adapter and one
sensor are required.
• TC1 is battery powered and can be used in remote locations.
• Includes TC1 measuring unit, battery charger and carrying case.
Cat. No.
UPC No.
Description
TC1S KIT
MA4
MA22
MA50
MA120
MA12ID
TF70
TF130
01340
02086
06576
11798
06577
24054
06574
06575
TC1 Unit
Adapter for EK410L
Adapter for EK622L, EK622L, CCX, EK628L
Adapter for EK210L
Adapter for 1230, 1240, E12CCX, E12CCXL
Adapter for EK12ID, EK12IDL
Sensor for EK210L, EK410L, EK622L, CCX, EK628L
Sensor for 1230, 1240, E12CCX, EK12ID, E12CCXL, EK12IDL
Adapter and sensing unit chart
crimping tool
EK410L
EK622L,
All CCX Tools, EK628L
All 1230 and 1240 Tools
HK12ID, EK12IDL
adapter
MA4
MA22
sensor
TF70
TF70
MA120
MA12ID
TF130
TF130
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
AC Adapters for Battery-Powered Tools
214
• Operates all Greenlee 18V Li-ion battery-powered tools except the
ES750, ES85, ES25 and ES1000.
• Easily converts Greenlee 18V Li-ion battery-powered tools to
corded tools.
• Same physical size and shape as Greenlee18V Li-ion batteries,
providing unlimited run-time without additional weight or bulk.
• Long 16.5 foot cord allows mobility. Can also be used with an
extension cord.
• Provides the same power as a battery for consistent operating
performance.
specifications
EAC120
EAC230
Input 120 V AC 60 Hz 150W
Output 12 V DC 6.5A
Weight 1.6 lb (0.7 kg)
230 V AC 50 Hz 150W
12 V DC 6.5A
1.6 lb (0.7 kg)
Cat. No.
UPC. No.
Description
EAC18120
EAC18230
52191
52192
AC Adapter, 120 V to 18V
AC Adapter, 230 V to 18V
Battery Charger Adapter
• Attaches to 52178, 52179 and 52180 Li-ion battery chargers
• Allows chargers to charge Greenlee NiCd & NiMH 12 V and 9.6 V batteries
Cat. No.
UPC. No.
Description
25766
25766
Battery Charger Adapter
www.greenlee.com
REFERENCE
Competitive Die Compatibility
All Dies Listed may be used with the appropriate Greenlee Tools
T & B ILSCo
—
—
6 TON 9
ND8
—
ND
huskie panduit blackburn
—
—
—
HT58 8
CD-20018
BY 9
HT58
CD-2001
kearney penn-union
—
—
O9
—
—
—
6 TON
15500 SERIES
15500 SERIES
—
15600 SERIES6,
15500 SERIES5
ND
ILD
ILD
—
ILD-P4,
ILD5
HT , HT58
HT41
HT41
HTK
HT614,
HT415
CD-2001
CD-920
CD-920
—
CD-9404,
CD-9205
BY
B, H
B, H
—
15600 SERIES6,
B 5, H 5
O
—
—
PH2
PH27
—
T
T
—
—
—
ND
HT58
CD-2001
—
—
—
3
Notes: BOLD indicates that use of the proper die adapter is needed.
1
2
3
Use UA22 die adapters
UAW die adapters
Use UAK die adapters
8
Use CJD30 or CJD3BG Jaws 9 Use CJK Jaws
2
4
3
Use 48820 die adapters
2
5
2
Use 48802 die adapters
3
6
Use 48788 die adapters
3
7
Use 48824 die adapters
Crimping Die Cross Reference – Copper Color-Coded Lugs and Splices for 6-Ton Crimping Tools
ECCXl, EK622L, EK628L
CD-2001-6
BY17C
6TON29
CD-2001-4
BY19C
6TON33
CD-2001-2
BY21C
6TON37
CD-2001-1
BY53C
6TON42
CD-2001-1/0
BY23C
6TON45
CD-2001-2/0
BY28C
6TON50
CD-2001-3/0
BY25C
6TON54
CD-2001-4/0
BY31C
6TON62
CD-2001-250
BY27C
6TON66
CD-2001-300
BY35C
6TON71
CD-2001-350
BY37C
6TON76
CD-2001-400
6TON87
CD-2001-500
Notes for 6-ton dies: 1 Can be used with 22 Series, CCX and EK628L tools. Use UA22 die adapters with CCX. Use without adapters with 22 Series and EK628L.
2
Can be used with 22 Series, CCX and EK628L tools. Use UAW die adapters with CCX. Use W die adapters with 22 Series. Use with CJ03 jaws with EK628L.
3
Can be used with CCX and EK628L tools only. Cannot be used with 22 Series tools. Use UAK die adapters with CCX. Use with CJK jaws with EK628L.
215
INTERNATIONAL
6TON24
CANADA
Blackburn3
BY15C
USA
= Accessory
Panduit2
CD-2001-8
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Replacement Part
T & B3 ILSCO2 HUSKIE2
6TON21
Tel: 800.435.0786
Fax: 800.524.2853
= new product
Burndy2
W8CVT
W8CRT
X8CRT
W5CVT
W5CRT
X5CRT
X8CART
W5CVT
W5CRT
X5CRT
W4CVT
W4CRT
X4CRT
W3CRT
W2CVT
W2CRT
X2CRT
W1CVT
X1CRT-1
W1CRT-1
W25VT
W25RT
X25RT
W26VT
W26RT
X26RT
W27VT
W27RT
X27RT
W28VT
W28RT
X28RT
W29VT
W29RT
X29RT
W30VT
W30RT
W31VT
W31RT
W32VT
W32RT
W34VT
W34RT
Tel: 800.435.0786
Fax: 800.451.2632
Cable Size
Color Code
Greenlee1
8 AWG
Red
KC22-8
6 AWG
Blue
KC22-6
5 AWG
Blue
NA
4 AWG
Gray
KC22-4
3 AWG
White
NA
2 AWG
Brown
KC22-2
1 AWG
Green
KC22-1
1/O AWG
Pink
KC22-1/0
2/O AWG
Black
KC22-2/0
3/O AWG
Orange
KC22-3/0
4/O AWG
Purple
KC22-4/0
250 kcmil (MCM)
Yellow
KC22-250
300 kcmil (MCM)
White
KC22-300
350 kcmil (MCM)
Red
KC22-350
400 kcmil (MCM)
Blue
KC22-400
500 kcmil (MCM)
Brown
KC22-500
600 kcmil (MCM)
Green
KC22-600
Wire & Cable Termination
tool type greenlee burndy
EK410L
KC4, KA4
—
EK628L
KC22, KA22
W, X8
EK622L,
KC22, KA22, KD6
W, X
EK622L
1
1
2
CCX
KC22 , KA22 , KD6
W 2, X 2
1230
KC12, “U” STYLE, KD12 U
1240, 12CCX KC12, “U” STYLE, KD12 U
1240K
—
—
1550
—
P 4, U 5
K425BG,
K06
W, X
K425O
MADE FOR THE TRADE!™
Crimping Die Cross Reference – Copper Color-Coded Lugs and Splices for 12-Ton Crimping Tools
All 1230, 1240 & E12CCXL tools*
Cable Size
8 AWG
Color Code
Red
Greenlee
KC12-8
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Wire & Cable Termination
6 AWG
Blue
KC12-6
216
5 AWG
Blue
4 AWG
Gray
KC12-4
Burndy
U8CRT
T & B ILSCO HUSKIE
15520
ILD-1
Panduit
CD-920-8
Blackburn penn-union
B71CH
U5CRT
U8CABT
15522
ILD-2
HT41AT
CD-920-6
B73CH
T-7/374
15527
ILD-3
HT41AU
CD-920-4
B74CH
T-8/346
U5CRT
U4CRT
U6CABT
3 AWG
White
NA
U3CRT
2 AWG
Brown
KC12-2
U2CRT
15528
ILD-4
HT41AW
CD-920-2
B75CH
T-9
1 AWG
Green
KC12-1
U1CRT
4UCABT
15513
ILD-4
HT41AX
CD-920-1
B05CH
T-10
1/O AWG
Pink
KC12-1/0
U25RT
U2CABT
15508
ILD-5
HT41AY
CD-920-1/0
B06CHI
T-11/375
2/O AWG
Black
KC12-2/0
U26RT
15526
ILD-6
HT41AZ
CD-920-2/0
B72CH
T-12/348
3/O AWG
Orange
KC12-3/0
U27RT
15530
ILD-9
HT41BA
CD-920-3/0
B08CH
T-13
4/O AWG
Purple
KC12-4/0
U28RT
15511
ILD-10
HT41BC
CD-920-4/0
B09CH
T-14
250 kcmil (MCM)
Yellow
KC12-250
U29RT
15510
ILD-11
HT41BE
CD-920-250
B26CH
T-15
300 kcmil (MCM) White
KC12-300
U30RT
U28ART
15534
ILD-12
HT41BF
CD-920-300
B10CH
T-16
350 kcmil (MCM)
Red
KC12-350
U31RT
U29ART
15512
ILD-13
HT41BJ
CD-920-350
B11CH
T-17
400 kcmil (MCM) Blue
KC12-400
U32RT
U30ART
15512
ILD-14
HT41BK
CD-920-400
B11CH
T-18/324
500 kcmil (MCM) Brown
KC12-500
U34RT
U31ART
15506
ILD-15
HT41BL
CD-920-500
B12CH
T-19/470
600 kcmil (MCM) Green
KC12-600
U36RT
U32ART
ILD-16
HT41BM
CD920-600
B36CH
T-20/299
700 kcmil (MCM)
Pink
NA
U38RT
15505
ILD-16
T-20/299
750 kcmil (MCM)
Black
KC12-750
U39RT
15515
ILD-17
T-22/472
HT41BP
Notes for all 12-ton dies: * All 12-ton dies shown can be used with all 1230, 1240 and 12CCX Greenlee tools up to the capacity limits of the tool.
CD-920-750
B29CH
www.greenlee.com
Crimping Die Cross Reference – Aluminum Color-Coded Lugs and Splices for 6-Ton Tools
ECCXL, EK622L, & EK628L
Cable Size
8 AWG
Color Code
Blue
Greenlee1
KA22-8
Burndy2
X8CART
T & B3 ILSCO2 HUSKIE2
Panduit2
6TON24
Blackburn3
BY17C
Gray
KA22-6
X6CART
6TON29
CD-2001-4
BY19C
Green
KA22-4
X4CART
6TON37
CD-2001-1
BY53C
2 AWG
Pink
KA22-2
X2CART
6TON42
CD-2001-1/0
BY23C
1 AWG
Gold
KA22-1
X1CART
6TON45
CD-2001-2/0
BY24C
1/O AWG
Tan
KA22-1/0
X25ART
6TON50
CD-2001-3/0
BY25C
2/O AWG
Olive
KA22-2/0
X26ART
6TON54
CD-2001-4/0
BY31C
3/O AWG
Ruby
KA22-3/0
X27ART
6TON60
CD-2001-250
BY32C
4/O AWG
White
KA22-4/0
X28ART
6TON66
CD-2001-300
BY35C
250 kcmil (MCM)
Red
KA22-250
6TON71
CD-2001-350
BY37C
300 kcmil (MCM)
Blue
KA22-300
6TON76
CD-2001-400
BY35C
350 kcmil (MCM)
Brown
KA22-350
6TON87
BY37C
Notes for 6-ton dies:
1
Can be used with 22 Series, CCX and EK628L tools. Use UA22 die adapters with CCX. Use without adapters with 22 Series and EK628L.
2
Can be used with 22 Series, CCX and EK628L tools. Use UAW die adapters with CCX. Use with W die adapters with 22 Series. Use CJ03 jaws with EK628L.
3
Can be used with CCX and EK628L tools. Cannot be used with 22 Series tools. Use UAK die adapters with CCX. Use CJK jaws with EK628L.
Wire & Cable Termination
6 AWG
4 AWG
Crimping Die Cross Reference – Aluminum Color-Coded Lugs and Splices for 12-Ton Tools
All 1230, 1240 & 12CCX tools*
Cable Size
8 AWG
Gray
KA12-6
U6CABT
15527
ILD-3
HT41GE
4 AWG
Green
KA12-4
U4CABTQ
15513
ILD-4
HT41GM
2 AWG
Pink
KA12-2
U2CABT
15508
ILD-7
HT41GF
1 AWG
Gold
KA12-2
U1CART
15526
ILD-7
1/O AWG
Tan
KA12-1/0
U25ART
15530
ILD-8
2/O AWG
Olive
KA12-2/0
U26ART
15511
ILD-10
3/O AWG
Ruby
KA12-3/0
U27ART
15532
ILD-10
4/O AWG
White
KA12-4/0
U28ART
15534
ILD-12
Red
KA12-250
U29ART
15514
300 kcmil (MCM)
Blue
KA12-300
U30ART
350 kcmil (MCM)
Brown
KA12-350
U31ART
400 kcmil (MCM)
Green
KA12-400
500 kcmil (MCM)
Pink
600 kcmil (MCM)
Black
700 kcmil (MCM)
Yellow
U39ART
750 kcmil (MCM)
Yellow
U39ART
250 kcmil (MCM)
B74CH
T-8/346
CD-920-1
B05CH
T-11/375
CD-920-1/0
B06CHI
T-12/348
CD-920-2/0
B06CHI
T-471
CD-920-3/0
B06CH
T-296
HT41EY
CD-920-4/0
B09CH
T-297
HT41GW
CD-920-250
B26CH
T-467
HT41EZ
CD-920-300
B10CHI
T-298
ILD-13
HT41FW
CD-920-350
B11CH
T-18/324
15512
ILD-14
HT41GZ
CD-920-400
B11CH
T-19/470
15506
ILD-14
HT41FA
CD-920-500
B12CHI
T-20/299
U32ART
15536
ILD-16
HT41HH
CD-920-600
B36CH
T-22/472
KA12-500
U34ART
15505
ILD-16A
HT41FB
CD-920-500A
B76CH
T-300
KA12-600
U36ART
15515
ILD-17
HT41HG
ILD-17
HT41IJ
ILD-18
HT41IJ
KA12-750
15504
HT41EX
= new product
= Replacement Part
= Accessory
CD920-750
T-24/473
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Notes for all 12-ton dies: * All 12-ton dies shown can be used with all 1230, 1240 and 12CCX Greenlee tools up to the capacity limits of the tool.
CD-920-4
217
INTERNATIONAL
6 AWG
Blackburn penn-union
B73CH
T-7/374
CANADA
T & B ILSCO HUSKIE
Panduit
15522
ILD-2
HT41GL
USA
Burndy
U8CABT
Tel: 800.435.0786
Fax: 800.524.2853
Greenlee
KA12-8
Tel: 800.435.0786
Fax: 800.451.2632
Color Code
Blue
MADE FOR THE TRADE!™
Crimping Die Cross Reference – Copper C-Taps for Copper Cables
CCX, EK622L, EK628L
Wire & Cable Termination
run tap
Greenlee1
10 AWG
10AWG
Burndy2
T & B3 ILSCO2 HUSKIE2
W238
HT58DG
Panduit2
Blackburn3
8 AWG
8 AWG
KD6-15
W162
HT58BZ
BY21
4-6 AWG
8 AWG
KD6-10
WBG
ND-BG
HT58G
CD-2001-BG
BY31
4-6 AWG
6 AWG
KD6-10
WBG
ND-BG
HT58G
CD-2001-BG
BY31
4-6 AWG
4 AWG
KD6-10
WBG
ND-BG
HT58G
CD-2001-BG
BY31
2-3 AWG
4-8 AWG
KD6-12
WC
ND-C
HT58J
CD-2001-C
BY33
ND-C
HT58J
CD-2001-C
BY33
2-3 AWG
2-3 AWG
KD6-12
WC
1/O-2/O AWG
8-2 AWG
KD6-11
WO
HT58AK
KD6-11
WO
HT58AK
OJB
D34
DBL
1/O-2/O AWG
1/0-2/0 AWG
3/O-4/O AWG
6-2 AWG
3/O-4/O AWG
1/0-2/0 AWG
D 34
3/O-4/O AWG
3/0-4/0 AWG
D 34
OJB
Notes for 6-ton dies:
1
Can be used with 22 Series, CCX and EK628L tools. Use UAW die adapters with CCX. Use D3 adapters with 22 Series. Use CJD3 jaws with EK628L.
2
Can be used with 22 Series, CCX and EK628L tools. Use UAW die adapters with CCX. Use D3 die adapters with 22 Series. Use CJD3 jaws with EK628L.
3
Can be used with CCX and EK628L tools. Cannot be used with 22 Series tools. Use UAK die adapters with CCX. Use CJK jaws with EK628L.
4
Die adapters included with EK622L have D3 profile. UAW adapters for CCX tools have D3 profile. CJD3 jaws for EK628L have D3 profile.
Crimping Die Cross Reference – Copper C-Taps for Copper Cables
All 1230,1240 & 12CCX tools*
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
run tap
10 AWG
10 AWG
218
Greenlee
KD12-35
Burndy
T & B ILSCO HUSKIE
U238
HT41DG
Panduit
Blackburn penn-union
8 AWG
8 AWG
KD12-15
U162
HT41BZ
B71AH
4-6 AWG
8 AWG
KD12-10
UBG
HT41G
CD-920-BG
B58CS
T-BG
4-6 AWG
6 AWG
KD12-10
UBG
HT41G
CD-920-BG
B58CS
T-BG
4-6 AWG
4 AWG
KD12-10
UBG
HT41G
CD-920-BG
B58CS
T-BG
2-3 AWG
4-8 AWG
KD12-12
UC
HT41J
CD-920-C
HKBC
2-3 AWG
2-3 AWG
KD12-12
UC
ILD-C
HT41J
CD-920-C
HKBC
1/0-2/0 AWG
8-2 AWG
KD12-11
UO
ILD-O
HT41AK
HO
1/0-2/0 AWG 1/0-2/0 AWG
KD12-11
UO
ILD-O
HT41AK
HO
T-O
3/0-4/0 AWG
KD12-30
UD3
ILD-D3
HT41X
CD-920-D3
HD
T-D3
3/0-4/0 AWG 1/0-2/0 AWG
KD12-30
UD3
ILD-D3
HT41X
CD-920-D3
HD
T-D3
3/0-4/0 AWG 3/0-4/0 AWG
KD12-30
UD3
ILD-D3
HT41X
CD-920-D3
HD
T-D3
6-2 AWG
ILD-C
Notes for all 12-ton dies: * All 12-ton dies shown can be used with all 1230, 1240 and 12CCX Greenlee tools up to the capacity limits of the tool.
T-O
www.greenlee.com
CABLE BENDING TOOLS
Ratchet Cable Bender
Cat. No.
UPC No.
Description
796
22578
22579
22682
22934
30236
22590
22578
22579
22682
22934
30236
Ratchet Cable Bender
Ratchet Wrench with Grip
L-Wrench with Grip
10" (254 mm) Ratchet Extension
Bending Shoe
Storage Box
SPECIFICATIONS
Capacity
Up through 500 kcmil (MCM) (240 mm²), 600 volt, copper
or aluminum cable
8.2 lbs. (3.7 kg)
Weight
Hydraulic Cable Bender
Wire & Cable Termination
• Simplifies and speeds cable installation.
• 10" (254 mm) ratchet extension is furnished to simplify
bending in deep enclosures.
• Includes ratchet wrench, L-wrench, ratchet extension,
bending shoe assembly and storage box.
• One-shot bends up to 90°; automatically unloads cable.
• Compact design bends in tight places.
• Unit with foot pump keeps both hands free to hold cable.
800F1725
Description
800
802
23892
24395
800F1725
23893
37729
1725
23955
37729
31353
23955
Hydraulic Cable Bender only
Hydraulic Cable Bender with High Pressure Hose Unit
and Storage Box
Hydraulic Cable Bender with 1725 Foot Pump, High
Pressure Hose Unit and Storage Box
High Pressure Hydraulic Hose 1/4" x 10' (6.4 mm x 3 m)
Hydraulic Foot Pump
Metal Storage Box
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.524.2853
Weight
350 - 1000 kcmil (MCM) (185-500 mm²), 600 volt
350 - 750 kcmil (MCM) compact cable
800 – 7 lbs. (3.2 kg), 802 – 26 lbs. (11.8 kg)
800F1725 – 36 lbs. (16.4 kg)
= Replacement Part
= Accessory
219
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
Capacity
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
MADE FOR THE TRADE!™
WIRE AND CABLE STRIPPING TOOLS
Wire & Cable Termination
Cable Stripping Tool
• Triple action stripping – rotary, linear, and spiral – “Window”
stripping is accomplished by combining 2 rotary cuts with a spiral
cut in between them.
• Eliminates Cable Scoring. Blade height is adjustable to precisely
match insulation thickness
• Interchangeable cable guides for small and large cable diameters
• Hook on the cable guide is used to start jacket removal without the
need to use a screwdriver or pliers
• Replacement blade storage pocket in the base of the tool
• Long life, high-carbon steel blade
• Ergonomic handle shape
• Suitable for most jacket materials
Cat. No.
UPC No.
Description
SPECIFICATIONS
1903
13544
12679
13544
Cable Stripping Tool
Replacement Blade (2 per package)
Capacity
THHN Cable Size Range: 8AWG to 1250 kcmil (10-625 mm2)
Overall Cable Diameter: 0.18" to 1.57" (4.5-40.0 mm)
Cable Diameter Using Small Cable Guide Hook: 0.18" to 0.98" (4.5-25.0 mm)
Cable Diameter Using Large Cable Guide Hook: 0.79" to 1.57" (20.0-40.0 mm)
Weight
.25 lbs (0.1 g)
Adjustable Cable Stripper
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Cat. No.
UPC No.
Description
1905
21978
21533
21978
Adjustable Cable Stripper
Blade
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
• For mid-span and end termination. Strips TW, THW, THWN, THHN
and similar single-layer insulation.
• Fast-close jaws. Quick size and insulation adjustments.
• Snap action for same cutting depth time after time.
220
Capacity
1/0 - 1000 kcmil (MCM) (50 - 500 mm² diameter);
insulation rated 600 VAC Nominal
.9 lb. (408 g)
Weight
Kwik Stripper® Heavy-Duty Wire Stripper
• 18-6 AWG (1.0-4.1 mm dia.) stripping capacity.
• Front entry jaws for easy access to boxes, panels and tight spaces.
• Quick and easy adjustments.
• Tough metal alloy construction.
Cat. No.
UPC No.
Description
45019
45020
45019
45020
Kwik Stripper Heavy-Duty Wire Stripper
Heavy-Duty Jaws
www.greenlee.com
Kwik Stripper® Wire Stripper
Cat. No.
UPC No.
Description
45000
20243
45000
20243
Kwik Stripper Wire Stripper
Blade Cassette
Automatic Wire Stripper
• Production grade wire stripper strips insulation from
most smaller gauge wire.
• Strips up to 7/8" (22.2 mm) length.
• Strips PVC and THHN insulation.
• For use with solid and stranded wire.
Cat. No.
UPC No.
Description
1935
37600
Automatic Wire Stripper
Wire & Cable Termination
• 34-10 AWG (.08-6mm²) stripping capacity.
• 12 AWG (4 mm²) solid, 10 AWG (6 mm²) stranded cutting capacity.
• Strips and cuts flat and round cable.
• Self-adjusts to different wire gauges.
• Contoured and cushioned handles.
• Front entry jaws have an adjustable strip length guide.
• Lightweight reinforced nylon is chemical and corrosion resistant.
SPECIFICATIONS
Capacity
Weight
20 - 10 AWG (.5 mm² - 6 mm²) with PVC or THHN insulation
.7 lb. (300 g)
WIRE CRIMPING TOOLS
Gator® Terminal Crimping Tool
= Accessory
EK210L11
EK210L12
EK210L22
EK210L120
EK210L230
52177
25752
52178
52179
52180
52079
52080
52081
52082
52083
52177
25752
52178
52179
52180
1.5-Ton Battery-Powered Crimping Tool w/120 volt charger
1.5-Ton Battery-Powered Crimping Tool w/12 volt charger
1.5-Ton Battery-Powered Crimping Tool w/230 volt charger
1.5-Ton Crimping Tool w/120V AC Adapter
1.5-Ton Crimping Tool w/230V AC Adapter
18V 1.5 Ah Li-ion
Carrying Case
120V Charger
12V Charger
230V Charger
221
INTERNATIONAL
= Replacement Part
Description
CANADA
= new product
Uses Kwik Cycle 9 Die Sets
12-3/4" (324 mm)
3-1/2 lb. (1.6 kg)
18V 1.5 Ah Li-ion
2,900 lb. (13kN)
2-7/8" (73 mm)
~2 seconds
30 minutes
400
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Capacity
Length
Weight
Battery
Crimping Force
Width
Crimp Cycle Time
Battery Charge Time
Est. Cycles per Charge
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
SPECIFICATIONS
USA
1.5
Tel: 800.435.0786
Fax: 800.451.2632
• Intelligent Crimping System Technology includes a pressure sensor that monitors the
crimping force of each crimp and provides the operator a visual and audible alert if the
force is below specifications.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and
faster cycle times.
• LED light provides the operator with the battery charge and tool maintenance status.
• In line tool style is light weight and very easy to control
• One trigger controls all tool functions.
• Crimping head rotates 350°
• Tools automatically retract when the crimping or cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery temperature
to maximize battery life
• Uses all Kwik Cycle 9 crimping dies.
• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded adapter
in place of batteries and charger
MADE FOR THE TRADE!™
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Wire & Cable Termination
Kwik Cycle® 9
222
• Frames are manufactured from heat-treated, hardened tool steel for
superior life and function.
• Tools feature a precision, full-cycle ratchet for accurate, repeatable
crimps every cycle.
• Crimping dies are manufactured from hardened, heat-treated tool
steel for superior life.
• Tension adjustment preset at the factory for optimum performance.
• Higher leverage force and ergonomically designed handle for
improved comfort.
• Ideal for field installation of connectors as well as shop use.
• Die sets are easily interchangeable using a screwdriver.
• Uses all Kwik Cycle 9 crimping dies (see below.
Cat. No.
UPC No.
Description
45504
45504
Kwik Cycle 9" Crimp Frame
SPECIFICATIONS
Capacity
Weight
Uses Kwik Cycle 9 Die Sets
1.1 lb. (500 g)
Kwik Cycle® 9
Interchangeable Die Sets for Insulated and Non-Insulated Terminals
Cat./UPC No.
CONNECTION
DESCRIPTION
22-10 awg
Color coded nests for easy identification
Standard insulated terminals, ring tongue, spade lug, slide on and butt splices
- KWIK CYCLE 9
TOOL W/ DIE 45500
- DIE ONLY 45509
KWIK CYCLE 9
- TOOL
W/ DIE 45501
- DIE ONLY 45570
22-10 awg
Color coded nests for easy identification
For fully insulated slide on style connectors
AMP Ultrafast™ style
- DIE ONLY 45565
26-16 awg
For mini insulated terminals with smaller wire barrels
Ring tongue, spade, slide on and butt splices
22-10 awg
For non-insulated terminals and splices
26-10 awg
For non-insulated and insulated wire ferrules
8-4 awg
For non-insulated and insulated wire ferrules
- KWIK CYCLE 9
TOOL W/ DIE 45505
- DIE ONLY 45507
- DIE ONLY 03283
- DIE ONLY 03284
Note: Other dies see page 215.
www.greenlee.com
Premium Terminal Crimping Tool
SPECIFICATIONS
Length
Weight
Crimping Dies
Included
9" (23 cm)
1.35 lbs. (.6 kg)
22-10 AWG Insulated Terminals
22-10 AWG Uninsulated Terminals
26-8 AWG Wire Ferrules
Cat. No.
UPC No.
Description
K210
10873
10874
10875
10876
10877
10872
10873
10874
10875
10876
10877
Crimping Tool with 10873, 10874 and 10875 die sets
Die Set, 22-10 AWG Insulated Terminals
Die Set, 22-10 AWG Uninsulated Terminals
Die Set, 26-8 AWG Wire Ferrules
Die Set, RG 58/59/62/71
Die Set, 20-10 AWG Open Barrel Connectors
Wire & Cable Termination
• Storage for two sets of crimping dies in the handles
• No tools needed to change dies
• Precision mechanism for smooth crimping cycles
• Hardened mechanism components for long term durability
• Cushioned handles for comfort
• Full cycle mechanism assures complete crimps, but tool can be
opened in mid-cycle if necessary
• Equipped with 3 crimping die sets for 22-10 AWG insulated terminals
(red, yellow, blue), 22-10 AWG uninsulated terminals, and
26-8 AWG wire ferrules
Terminal Crimping Tool
KP1022
Cat. No.
UPC No.
Description
KP1022
KP1022D
02155
10633
Terminal Crimping Tool with molded grip
Terminal Crimping Tool with dipped grip
SPECIFICATIONS
Kwik Cycle® Crimping Tool
UPC No.
Description
K2-1BGL
02632
Kwik Cycle Crimping Tool
SPECIFICATIONS
Capacity
Length
Weight
= new product
= Replacement Part
= Accessory
22 AWG - 6 AWG
12.8" (325 mm)
.3 lbs. (136 g)
223
INTERNATIONAL
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• For non-insulated terminals.
• Includes ratchet mechanism which releases only after full crimp cycle
is completed.
CANADA
9-1/2" (241 mm)
1.05 lbs. (.48 kg)
Insulated Terminals & Splices - 10 - 22 AWG
Uninsulated Terminals & Splices - 10 - 22 AWG
Tel: 800.435.0786
Fax: 800.524.2853
Overall Length
Weight
Capacity
USA
KP1022D
Tel: 800.435.0786
Fax: 800.451.2632
• Two die positions permit the KP1022 to crimp both insulated and
uninsulated terminals and splices.
• Forged steel and hardened design provides long life.
• Smooth pivot action allows tool to easily be used with one hand.
• Double-cushioned handle grips on the KP1022 are easy on the hands.
• Standard handle grips on the KP1022D make it easy to slip in/out of tool
pouches.
• Precision machined and hardened cutter blades make wire cutting easy.
MADE FOR THE TRADE!™
Electrical Terminal Crimper
Wire & Cable Termination
• Heavy-duty crimper for D-sub 26-28 AWG pins and sockets; 22-26 AWG
butt-insulated connectors; 22-26 AWG telephone piercing spade lugs; and
14-18, 20-22 AWG open barrel connectors.
• Built-in wire cutter
• Dual-durometer grips for improved comfort and control.
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
Description
PA1176
Electrical Terminal Crimper
SPECIFICATIONS
Weight
8 oz. (227g)
EDAC/ELCO Crimper
Pin locators
224
Cat. No.
Crimp tool for broadcast professionals terminating loose 28-18 AWG (.08-75
mm2) EDAC and ELCO rack and panel open barrel contacts.
• Crimps EDAC pins 516-290-590 & 516-290-591 along with ELCO pins
000-60-8017-03-13
• Embedded pin locators properly align pins to ensure accurate, reliable
crimping
• Fully-ratcheted to prevent under crimping
• Requires low hand force and provides superior crimp force
• True ergonomic design for extreme comfort and performance
• Non-slip, soft rubber handles
• Double-plated for extended long-life and crimping accuracy
• Factory-calibrated and set for precision
Cat. No.
Description
PA1670
EDAC/ELCO Crimper
SPECIFICATIONS
Weight
19 oz. (538 g)
Open Barrel Contact Pin Crimper
Professional crimping tool for open-barrel box and round connector contacts
with a wire range of 30-18AWG (0.05-.75 mm2)
• Precision fixed dual-plate dies for crimp accuracy
• Crimps non-insulated terminal lugs, cable lugs and parallel and serial
splices or “F-Type”
• Works with Molex, Waldom & Leoco-type connectors
• Durable steel construction for long life
• Rubber-embedded ergonomic handles for low-effort operation
Cat. No.
Description
PA1645
Open Barrel Contact Pin Crimper
SPECIFICATIONS
Weight
Range
14 oz. (400 g)
Small: 30-24 AWG (0.05-.20 mm2)
Medium: 22-18 AWG (.34-.75 mm2)
www.greenlee.com
Open Barrel Contact Pin Crimper
SPECIFICATIONS
Weight
Range
14 oz. (400 g)
Small: 24-22 AWG (0.05-.20 mm2)
Medium: 18-14 AWG (.34-.75 mm2)
Cat. No.
Description
PA1631
Open Barrel Contact Pin Crimper
Open Barrel D-Sub Contact Pin Crimper
Professional crimping tool for open-barrel D-sub contacts with a wire
range of 28-20 AWG (.08-0.50 mm2)
• Crimps standard D-sub contacts
• Precision fixed dual-plate dies for crimp accuracy
• Built-in contact locator
• Durable steel construction for long life
• Ergonomic handles for low-effort operation
SPECIFICATIONS
Weight
Range
14 oz. (400 g)
Small: 28-24 AWG (0.08-.20 mm2)
Medium: 22-20 AWG (.34-.50 mm2)
Cat. No.
Description
PA1646
Open Barrel D-Sub Contact Pin Crimper
Wire & Cable Termination
Professional crimping tool for open-barrel box and round connector
contacts with a wire range of 24-14 AWG (0.2-2.5 mm2)
• Precision fixed dual-plate dies for crimp accuracy
• Built-in locator
• Crimps non-insulated terminal lugs, cable lugs and parallel and
serial splices or “F-Type”
• Works with Molex, Waldom & Leoco-type connectors
• Durable steel construction for long life
• Rubber-embedded ergonomic handles for low-effort operation
D-Sub Indent Crimpers
Not for use on hardened steel, brass or phosphor bronze contacts
D-sub 4-Indent crimper (26-20 AWG)
D-sub 4-Indent crimper (20-12 AWG)
D-sub 8-Indent crimper (26-20 AWG)
Non-Insulated Terminal Crimper
Weight
Range
= new product
13.5 oz. (380 g)
Small: 28-24 AWG (0.5 - 1.5 mm2)
Medium: 16-14 AWG (1.5 - 2.5 mm2)
Large: 12-10 AWG (4.0 - 6.0 mm2)
= Replacement Part
= Accessory
Cat. No.
Description
PA1618
HTN 21L Non-Insulated Terminal Crimper
225
INTERNATIONAL
SPECIFICATIONS
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Professional crimping tool for non-insulated terminal lugs with a wire range
of 20-10 AWG (0.5 – 6.0 mm2).
• Fixed steel die system
• Built-in terminal locator
• Crimps non-insulated terminal lugs, cable lugs and parallel and
serial splices
• Durable steel construction for long life
• Ergonomic handles for low-effort operation
CANADA
11 oz. (312 g)
PA1460
PA1461
PA1462
USA
Weight
Description
Tel: 800.435.0786
Fax: 800.524.2853
SPECIFICATIONS
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
Crimping tool for 4- or 8-indent crimping of closed-barrel D-sub contacts.
• Dual-durometer grips provide comfort and control.
• 4-Indent crimper for AWG 26-20 (0.14-0.50 mm2) D-sub contacts (P/N 1460)
• 4-Indent crimper for AWG 20-12 (0.50-4.0 mm2) D-sub contacts (P/N 1461)
• 8-Indent crimper for AWG 26-20 (0.14-0.50 mm2) D-sub contacts (P/N 1462)
• Adjustable pin height locator (P/Ns 1460 and 1462 only)
MADE FOR THE TRADE!™
Non-Insulated Wire Ferrules
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Wire & Cable Termination
• For terminating stranded wire into terminal blocks.
• Electrolytic copper and tin plating provide maximum conductivity
and low contact resistance.
• Meets DIN 46228, part 1, 0.5 - 50 mm2.
226
Specifications
Material Copper
Surface Tin plated
Conductor Size
Catalog UPC Dimension L Recommended
Code
inches (mm) Crimping Tools
AWG (mm2) Number
onductor Size
C
Catalog UPC Dimension L Recommended
Code
inches (mm)
Crimping Tools
AWG (mm2) Number
24 - 23
69 / 5VZ*
04989
.197 (5)
(0.25)
69 / 7VZ*
04990
.276 (7)
K1GL, K32GL,
K30GL,
Die 03283
22
70 / 5VZ*
04991
.197 (5)
(0.34)
70 / 7VZ*
04992
.276 (7)
K1GL, K32GL,
K30GL,
Die 03283
K1GL, K32GL,
K36GL, K30GL,
Die 03283
6
77 / 12VZ
05032
.471 (12)
(16)
77 / 15VZ
05033
.591 (15)
77 / 18VZ
05034
.709 (18)
77 / 20VZ* 05035
.787 (20)
77 / 25VZ
05036
.984 (25)
4
78 / 12VZ* 05038
.471 (12)
(25)
78 / 15VZ
05039
.591 (15)
78 / 20VZ* 05041
.787 (20)
78 / 25VZ
05042
.984 (25)
78 / 28VZ* 05043
1.102 (28)
2
79 / 15VZ* 05044
.591 (15)
(35)
79 / 18VZ
05045
.709 (18)
79 / 22VZ* 05046
.866 (22)
79 / 25VZ
05047
.984 (25)
79 / 30VZ* 05048
1.181 (30)
1/0
80 / 18VZ
05049
.709 (18)
(50)
80 / 22VZ* 05050
.866 (22)
80 / 25VZ
05051
.984 (25)
80 / 30VZ* 05052
1.181 (30)
2/0
81 / 22VZ
05053
.866 (22)
(70)
81 / 25VZ
05054
.984 (25)
81 / 30VZ
05055
1.181 (30)
3/0
82 / 25VZ
05056
.984 (25)
(95)
82 / 30VZ
05057
1.181 (30)
82 / 32VZ
05058
1.260 (32)
82 / 34VZ
05059
1.339 (34)
4/0
83 / 30VZ
05060
1.181 (30)
(120)
83 / 32VZ
05061
1.260 (32)
83 / 34VZ
05062
1.339 (34)
83 / 38VZ
05063
1.496 (38)
83 / 40VZ
05064
1.575 (40)
300 KCMIL
84 / 32VZ
05065
1.260 (32)
(150)
84 / 34VZ
05066
1.339 (34)
84 / 40VZ
05068
1.575 (40)
350 KCMIL
85 / 32VZ
05069
1.260 (32)
(185)
85 / 40VZ
05070
1.575 (40)
20
(0.5)
71S / 6VZ
71S / 8VZ*
71S / 10VZ
04993
04994
04995
.236 (6)
.315 (8)
.394 (10)
18
(0.75)
71 / 6VZ
71 / 8VZ*
71 / 10VZ
71 / 15VZ*
04996
04997
04998
04999
.236 (6)
.315 (8)
.394 (10)
.591 (15)
K1GL, K32GL,
K36GL, K30GL,
Die 03283
18 - 17
(1)
72S / 6VZ
72S / 8VZ*
72S / 10VZ
72S / 12VZ*
72S / 15VZ*
05000
05001
05002
05003
05004
.236 (6)
.315 (8)
.394 (10)
.471 (12)
.591(15)
K1GL, K32GL,
K36GL, K30GL,
Die 03283
16
(1.5)
72 / 7VZ
72 / 10VZ
72 / 12VZ
72 / 15VZ*
72 / 18VZ
72 / 20VZ*
05005
05006
05007
05008
05009
05010
.276 (7)
.394 (10)
.471 (12)
.591 (15)
.709 (18)
.787 (20)
K1GL, K32GL,
K36GL, K30GL,
Die 03283
14
(2.5)
73 / 7VZ
73 / 10VZ
73 / 12VZ
73 / 15VZ*
73 / 18VZ
05011
05012
05013
05014
05015
.276 (7)
.394 (10)
.471 (12)
.591 (15)
.709 (18)
K1GL, K32GL,
K36GL, K30GL,
Die 03283
12
(4)
74 / 9VZ
74 / 12VZ
74 / 15VZ
74 / 18VZ
74 / 20VZ*
05016
05017
05018
05019
05020
.354 (9)
.471 (12)
.591 (15)
.709 (18)
.787 (20)
K32GL, K36GL,
K30GL,
Die 03283
10
(6)
75 / 10VZ
75 / 12VZ
75 / 15VZ
75 / 18VZ
75 / 20VZ*
75 / 25VZ*
05021
05022
05023
05024
05025
05026
.394 (10)
.471 (12)
.591 (15)
.709 (18)
.787 (20)
.984 (25)
K32GL, K34GL,
K36GL, K30GL,
Die 03283
8
(10)
76 / 12VZ
76 / 15VZ
76 / 18VZ
76 / 20VZ*
76 / 25VZ*
05027
05028
05029
05030
05031
.471 (12)
.591 (15)
.709 (18)
.787 (20)
.984 (25)
K28GL, K34GL,
Die 03284
*No applicable standard.
See pages 229-231 for recommended ferrule crimping tools.
K28GL, K34GL,
Die 03283
K28GL,
Die 03284
K28GL
K28GL, K29GL
K29GL
K29GL
22 Series Tool
with AE 22/120
dies
22 Series Tool
with AE 22/150
dies
22 Series Tool
with AE 22/185
dies
www.greenlee.com
Insulated Wire Ferrules
• Terminate stranded wire into terminal blocks.
• Electrolytic copper and tin plating provide maximum conductivity
and low contact resistance.
SPECIFICATIONS
Copper
Tin-plated
Polypropylene Plastic
.471 (12)
.551 (14)
.630 (16)
.236 (6) K1GL, K32GL,
.315 (8) K36GL, K30GL,
.394 (10) Die 03283
18
(0,75)
470 / 6
470 / 8
470 / 10
470 / 12
04551 Gray
04552
04553
04554
.471 (12)
.551 (14)
.630 (16)
.709 (18)
.236 (6) K1GL, K32GL,
.315 (8) K36GL, K30GL,
.394 (10) Die 03283
.471 (12)
18 - 17
(1)
471 / 6
471 / 8
471 / 10
471 / 12
04555
Red
04556
04557
04558
.471 (12)
.551 (14)
.630 (16)
.709 (18)
.236 (6) K1GL, K32GL,
.315 (8) K36GL, K30GL,
.394 (10) Die 03283
.471 (12)
16
(1,5)
472 / 8
472 / 10
472 / 12
472 / 18
04559 Black
04560
04561
04562
.551 (14)
.630 (16)
.709 (18)
.945 (24)
.315 (8) K1GL, K32GL,
.394 (10) K36GL, K30GL,
.471 (12) Die 03283
.709 (18)
14
(2,5)
473 / 8
473 / 12
473 / 18
04563
Blue
04564
04565
.551 (14)
.709 (18)
.945 (24)
.315 (8) K1GL, K32GL,
.471 (12) K36GL, K30GL,
.709 (18) Die 03283
12
(4)
474 / 10
474 / 12
474 / 18
04566 Gray
04567
04568
.699 (17)
.787 (20)
1.024 (26)
.394 (10) K32GL, K36GL,
.471 (12) K30GL,
.709 (18) Die 03283
10
475 / 12 04569 Yellow .787 (20)
(6)
475 / 18 04570
1.024 (26)
.471 (12) K32GL, K34GL,
.709 (18) K36GL, K30GL,
Die 03283
8
(10)
476 / 12
476 / 18
04571
Red
04572
.866 (22)
1.102 (28)
.471 (12) K28GL, K34GL,
.709 (18) Die 03284
6
(16)
477 / 12
477 / 18
04573
Blue
04574
.945 (24)
1.102 (28)
.471 (12) K28GL, K34GL,
.709 (18) Die 03284
4
(25)
478 / 16
478 / 18
478 / 22
04575 Yellow 1.181 (30)
04576
1.181 (30)
04577
1.417 (36)
.630 (16) K28GL,
.709 (18) Die 03284
.866 (22)
2
(35)
479 / 16
479 / 18
479 / 25
04578
Red
04579
04580
1.181 (30)
1.181 (30)
1.535 (39)
.630 (16) K28GL
.709 (18)
.984 (25)
480 / 20
480 / 25
04581
Blue
04582
1.417 (36)
1.575 (40)
.787 (20) K28GL, K29GL
.984 (25)
K1GL, K32GL,
Die 03283
24
167 / H
04837 Light .409 (10.4) .236 (6)
(0.25)
167 / HL 04838
Blue
.488 (12.4) .315 (8)
K1GL, K32GL,
K30GL,
Die 03283
22
168 / T
04839 Turquoise .409 (10.4) .236 (6)
(0.34)
168 / TL 04840
.488 (12.4) .315 (8)
K1GL, K32GL,
K30GL,
Die 03283
20
(0.5)
169 / OK
169 / O
169 / OH
04841 Orange
04842
04843
.471 (12)
.551 (14)
.630 (16)
.236 (6) K1GL, K32GL,
.315 (8) K36GL, K30GL,
.394 (10) Die 03283
18
(0.75)
170 / WK
170 / W
170 / WH
170 / WL
04844 White
04845
04846
04847
.488 (12.4)
.574 (14.6)
.645 (16.4)
.724 (18.4)
.236 (6) K1GL, K32GL,
.315 (8) K36GL, K30GL,
.394 (10) Die 03283
.471 (12)
18 - 17
(1)
171 / GK
171 / G
171 / GH
171 / GL
04848 Yellow
04849
04850
04851
.488 (12.4)
.574 (14.6)
.645 (16.4)
.724 (18.4)
.236 (6) K1GL, K32GL,
.315 (8) K36GL, K30GL,
.394 (10) Die 03283
.471 (12)
16
(1.5)
172 / RO
172 / RH
172 / RL
04852
Red
04853
04854
.574 (14.6) .315 (8) K1GL, K32GL,
.645 (16.4) .394 (10) K36GL, K30GL,
.960 (24.4) .709 (18) Die 03283
14
(2.5)
173 / B
173 / BH
173 / BL
04855
Blue
04856
04857
.598 (15.2) .315 (8) K1GL, K32GL,
.748 (19) .471 (12) K36GL, K30GL,
.984 (25) .709 (18) Die 03283
12
(4)
174 / GR
174 / GRH
174 / GRL
04858 Gray
04859
04860
.649 (16.5) .394 (10) K32GL, K36GL,
.767(19.5) .471 (12) K30GL,
1.003 (25.5) .709 (18) Die 03283
10
175 / S
04861 Black .787 (20)
(6)
175 / SL 04862
1.024 (26)
.471 (12) K32GL, K34GL,
.709 (18) K36GL, K30GL,
Die 03283
8
(10)
176 / E
176 / EL
04863 Ivory
04864
.846 (21.5) .471 (12) K28GL, K34GL
1.082 (27.5) .709 (18)
6
(16)
177 / GR
177 / GRL
04865 Green .870 (22.2) .471 (12) K28GL, K34GL
04866
1.110 (28.2) .709 (18)
4
(25)
178 / BR
178 / BRL
04867 Brown 1.181 (30)
04868
1.377 (35)
.630 (16) K28GL
.866 (22)
2
(35)
179 / B
179 / BL
04869 Beige 1.181 (30)
04870
1.535 (39)
.630 (16) K28GL
.984 (25)
1/0
180 / O
04871
1/0
(50)
See pages 229-231 for recommended ferrule crimping tools.
Olive 1.433 (36.4) .787 (20) K28GL, K29GL
(50)
= new product
= Replacement Part
= Accessory
227
INTERNATIONAL
04548 White
04549
04550
.409 (10.4) .236 (6)
.488 (12.4) .315 (8)
CANADA
469 / 6
469 / 8
469 / 10
04835 Gray
04836
USA
20
(0,5)
166 / GR
166 / GRL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
(0.14)
Tel: 800.435.0786
Fax: 800.524.2853
Color Code: DIN 46228, part 4
Conductor Dimensions
Size
Catalog UPC
inches (mm) Recommended
AWG (mm2) Number Number Color
L1
L2 Crimping Tools
Tel: 800.435.0786
Fax: 800.451.2632
Color Code: Old DIN standard
Conductor Dimensions
Size
Catalog UPC
inches (mm) Recommended
L1
L2 Crimping Tools
AWG (mm2) Number Number Color
Wire & Cable Termination
Material
Surface
Insulated
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Wire & Cable Termination
MADE FOR THE TRADE!™
228
Insulated Wire Ferrules
Insulated Twin Wire Ferrules
• Terminate stranded wire into terminal blocks.
• Electrolytic copper and tin plating provide maximum conductivity
and low contact resistance.
• Use to compress two separate conductors together in one ferrule
to make chain bridges easy to install.
• Electrolytic copper and tin plating provide maximum conductivity
and low contact resistance.
specifications
Material
Copper
Surface
Tin plated
specifications
Insulation Polypropylene plastic
Material
Copper
Surface
Tin plated
Insulation Polypropylene plastic
Color Code: French Standard.
Conductor Dimensions
Size
Catalog UPC
inches (mm) Recommended
L1
L2 Crimping Tools
AWG (mm2) Number Number Color
Conductor Dimensions
Size
Catalog UPC
inches (mm) Recommended
L1
L2 Crimping Tools
AWG (mm2) Number Number Color
26
(0.14)
.409 (10,4) .236 (6)
.488 (12,4) .315 (8)
K1GL, K32GL,
Die 03283
2 x 20
869 / 8
02954 White .591 (15) .315 (8)
(2 x 0.5)
K32GL, K36GL,
K30GL
24
167 / 6
02973 Light .433 (11) .236 (6)
(0.25)
167 / 8
02974 Yellow .511 (13) .315 (8)
K1GL, K32GL,
K30GL,
Die 03283
2 x 18
(2 x 0.75)
870 / 8
870 / 10
02955 Gray
02956
.591 (15) .315 (8)
.669 (17) .394 (10)
K32GL, K36GL,
K30GL
22
168 / 6
02975 Light .433 (11) .236 (6)
(0.34)
168 / 8
02976 Green .511 (13) .315 (8)
K1GL, K32GL,
K30GL,
Die 03283
2 x 17
(2 x 1)
871 / 8
871 / 10
02957
Red
02958
.591 (15) .315 (8)
.669 (17) .394 (10)
K32GL, K36GL,
K30GL
20
169 / 6
02977 White .433 (11) .236 (6)
(0.5)
169 / 8
02978
.511 (13) .315 (8)
K1GL, K32GL,
K30GL,
Die 03283
2 x 15
(2 x 1.5)
872 / 8
872 / 12
02959 Black
02960
.630 (16) .315 (8)
.787 (20) .471 (12)
K32GL, K36GL,
K30GL
18
170 / 6
02979
Blue
.452 (11.5) .236 (6)
(0.75)
170 / 8
02980
.531 (13.5) .315 (8)
K1GL, K32GL,
K36GL, K30GL,
Die 03283
2 x 13
(2 x 2.5)
873 / 10
873 / 13
02961
Blue
02962
.728 (18.5) .394 (10)
.846 (21.5) .512 (13)
K32GL, K36GL,
K30GL
2 x 11
874 / 12 02963 Gray
.906 (23) .471 (12)
(2 x 4)
K28GL, K34GL,
K36GL
18 - 17
171 / 6
02981
Red
.452 (11.5) .236 (6)
(1)
171 / 8
02982
.531 (13.5) .315 (8)
K1GL, K32GL,
K36GL,
Die 03283
2 x 10
(2 x 6)
875 / 14
02964
K28GL, K34GL,
2 x 8
(2 x 10)
876 / 14
02965
Red
1.024 (26) .551 (14)
K28GL
2 x 5
(2 x 16)
877 / 14
02966
Blue
1.181 (30) .551 (14)
K28GL
16
(1.5)
166 / 6
166 / 8
172 / 6
172 / 8
172 / 18
02971 Brown
02972
02983 Black
02984
02985
.452 (11.5) .236 (6)
K1GL, K32GL,
.531 (13.5) .315 (8)
K36GL, K30GL,
.897 (22.8) .688 (17,5) Die 03283
14
173 / 8
02986 Gray
.570 (14.5) .315 (8)
K1GL, K32GL,
(2.5)
173 / 18 02987
.945 (24) .688 (17.5) K36GL, K30GL,
Die 03283
12
174 / 12 02988 Orange .681 (17.3) .452 (11.5) K32GL, K36GL,
(4)
174 / 18 02989
1.003 (25.5) .688 (17.5) K30GL,
Die 03283
10
175 / 12 02990 Green .787 (20) .452 (11.5) K32GL, K34GL,
(6)
175 / 18 02991
1.024 (26) .688 (17.5) K36GL, K30GL,
Die 03283
8
(10)
176 / 12
176 / 18
02992 Brown .843 (21.5) .471 (12) K28GL, K34GL,
02993
1.062 (27) .688 (17.5) Die 03284
6
(16)
177 / 12
177 / 18
02994 Ivory
02995
4
178 / 18 02996 Black 1.181 (30) .688 (17.5) K28GL,
(25)
Die 03284
See pages 229-231 for recommended ferrule crimping tools.
.925 (23.5) .471 (12) K28GL, K34GL,
1.141 (29) .688 (17.5) Die 03284
Yellow 1.024 (26) .551 (14)
See pages 229-231 for recommended ferrule crimping tools.
www.greenlee.com
WIRE FERRULE CRIMPING TOOLS
Wire Ferrule Crimper
Cat. No.
Description
PA1647
PA2681
Wire Ferrule Crimper
Replacement die set
SPECIFICATIONS
Crimper Weight
Die Weight
15.2 oz. (430 g)
2.0 oz. (57 g)
Wire Ferrule Crimper
Professional crimping tool for insulated and non-insulated wire ferrules
with a range of 20-12 AWG (0.5-4 mm2).
• Fixed steel die system
• Ferrules insert from side of the tool
• Ferrule crimp conforms to DIN standards
• Durable steel construction for long life
• Ergonomic handles for low-effort operation
• Single tool for entire wire range
PA1648
Wire Ferrule Crimper
SPECIFICATIONS
Weight
15.2 oz. (430 g)
PA901435
PZ 6 ROTO Wire Ferrule Crimper
SPECIFICATIONS
Weight
= new product
= Replacement Part
= Accessory
13 oz. (368 g)
229
INTERNATIONAL
Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
Professional-quality rotary crimping tool for insulated and non-insulated wire
ferrules with a wire range of 24-10 AWG (0.25-6.0 mm2).
• Rotating die for front or sideferrule insertion
• Crimps conform to EN 60947-1 & DIN 46228 Pt. 1 and 4
• Hardened steel die system for long life
• Single tool for entire wire range (no additional dies are required)
• Durable steel construction for long life
• Ergonomic handles for low-effort operation
CANADA
PZ 6 ROTO Wire Ferrule Crimper
USA
Description
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
Wire & Cable Termination
Professional-quality crimping tool for insulated and non-insulated wire ferrules with a range of 20-10 AWG (0.5-6.0 mm2).
• Ferrules conform to DIN 46228 Pt. 1 and 4
• Ferrule insertion from the side of the tool
• Single tool for entire wire range (no additional dies are required)
• Durable steel construction for long life
• Ergonomic handles for low-effort operation
MADE FOR THE TRADE!™
Wire Ferrule Crimper
Wire & Cable Termination
Professional crimping tool for insulated and non-insulated wire ferrules with a
wire range of 10-6 AWG (6-16 mm2).
• Fixed steel die system
• Ferrules insert from side of the tool
• Ferrule crimp conforms to DIN standards
• Durable steel construction for long life
• Ergonomic handles for low-effort operation
Cat. No.
Description
PA1649
Wire Ferrule Crimper
SPECIFICATIONS
Weight
15.2 oz. (430 g)
Wire Ferrule Crimping Tool 26 - 13 AWG
• Makes trapezoidal crimps.
• Includes cutter and replaceable stripper blade set.
Cat. No.
UPC No.
Description
K1GL
02633
Wire Ferrule Crimper
SPECIFICATIONS
Range
Length
Weight
26 - 13 AWG (.14 - 2.5 mm²)
6.9" (175 mm)
.4 lbs. (0.2 kg)
• Makes trapezoidal crimps with full-cycle ratchet mechanism to assure
complete crimps.
• Crimps single and twin cable wire ferrules.
• Adjusts automatically to correct crimp size.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Wire Ferrule Crimping Tool 26 - 10 AWG
230
Cat. No.
UPC No.
Description
K32GL
02637
Wire Ferrule Crimper
SPECIFICATIONS
Range
Single cable wire ferrules: 26 - 10 AWG (.14 - 6 mm²)
Twin wire ferrules: 2 x 20 - 2 x 13 AWG (2 x .5 - 2 x 2.5 mm²)
8.4" (213 mm)
1.1 lbs. (.4 kg)
Length
Weight
Wire Ferrule Crimping Tool 10 - 6 AWG
• Makes trapezoidal crimp with full-cycle ratchet mechanism to assure
complete crimps.
• Crimps single and twin cable wire ferrules.
• Adjusts automatically to correct crimp size.
Cat. No.
UPC No.
Description
K34GL
02638
Wire Ferrule Crimper
SPECIFICATIONS
Range
Length
Weight
Single cable wire ferrules: 10 - 6 AWG (6 - 16 mm²)
Twin wire ferrules: 2 x 11 - 2 x 10 AWG (2 x 4 - 2 x 6 mm²)
8.9" (225 mm)
1.1 lbs. (0.4 kg)
www.greenlee.com
Wire Ferrule Crimping Tool 25 - 10 AWG
• Makes square-shaped crimps.
• Full-cycle ratchet mechanism assures complete crimps.
• Adjusts automatically to correct crimp size.
Cat. No.
UPC No.
Description
K30GL
02636
Wire Ferrule Crimper
Range
Length
Weight
25 - 10 AWG (0.14 - 6 mm²)
6.9" (175 mm)
1.1 lbs. (0.4 kg)
Wire Ferrule Crimping Tool 7 - 1/0 AWG
• Makes trapezoidal crimps with full-cycle ratchet mechanism to assure
complete crimps.
• Crimps single and twin cable wire ferrules.
Cat. No.
UPC No.
Description
K28GL
02634
Wire Ferrule Crimper
Wire & Cable Termination
SPECIFICATIONS
SPECIFICATIONS
Range
Single cable wire ferrules: 7 - 1/0 AWG (10 - 50 mm²)
Twin wire ferrules: 2 x 11 - 2 x 5 AWG (2 x 4 - 2 x 16 mm²)
13.2" (335 mm)
1.8 lbs. (0.8 kg)
Length
Weight
Cat. No.
UPC No.
Description
K29GL
02635
WIre Ferrule Crimper
1/0 - 3/0 AWG (50 - 90 mm²)
13.2" (335 mm)
1.8 lbs. (0.8 kg)
= Replacement Part
= Accessory
231
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
Range
Length
Weight
Tel: 800.435.0786
Fax: 800.524.2853
SPECIFICATIONS
USA
• Makes trapezoidal crimps with full-cycle ratchet mechanism to assure
complete crimps.
Tel: 800.435.0786
Fax: 800.451.2632
Wire Ferrule Crimping Tool 1/0 - 3/0 AWG
USA
Tel: 800.435.0786
Fax: 800.451.2632
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Wire & Cable Termination
MADE FOR THE TRADE!™
NOTES
232
Communications
For industry-leading tools for datacom, telecom and
fiber optic applications, Greenlee has the complete
product line. Choose from a large line-up of
premium installation tools, tone generators
and telecommunication test sets, network
certification instruments and fiber optic
test equipment – produced and
field-tested to perform from
start to finish.
Contents
Hand Tools
Fiber Optic Tools
Indentification
Testing
Fiber Optic Testing
Locators
Kits
Fiber Optic Kits
234
276
281
291
308
334
338
354
MADE FOR THE TRADE!™
Paladin Tools® is a registered trademark of Greenlee Textron Inc.
MADE FOR THE TRADE!™
Hand TOOLS
Communications
PowerPlay Multi-Tool Family
PT-540
PT-525
PT-510
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
110 Punchdown Tool
66 Punchdown Tool
UTP Round Wire Stripper
Extra Large Wire Cutter (up to 10 AWG Romex®)
Large Wire Cutter (up to 12 AWG Romex®)
Wire Cutter (up to Cat5e UTP cable)
Hard Wire Cutter Notch
18/20/22/24 AWG Wire Strippers
10 AWG Wire Stripper
12 AWG Wire Stripper
14 AWG Wire Stripper
Needle Nose & Gripping Pliers
Drywall Punch
Drywall Saw
24-18 AWG Lug Terminal Crimpers
18-14 AWG Lug Terminal Crimpers
Wire Hook & Spudger
¼” Socket Drive & Hex Bit Adapter
#4 & #6 Slotted Screwdrivers
#1 Philips Screwdriver
SOG Serrated Knife
3-in-1 File & Bottle Opener
7/16” & 3/8” Nut Drives
Ruler & Lanyard
Pivoting Handle Covers
PowerLocks™
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
30 Tools-In-One:
• Needle Nose and Gripping Pliers.
• 110 and 66 Punchdown Tools.
• UTP and Round Wire Stripper.
• Extra Large Wire Cutter – up to 10 AWG Romex®.
• Wire Cutter – up to Cat5e UTP cable.
• 7 Wire Strippers - 10/12/14/18/20/22/24 AWG.
• PowerLocks™ Secure Folding Components.
• Drywall Punch and Saw.
• Hard Wire Cutter Notch.
• 24-18 AWG Lug Terminal Crimpers.
• 18-14 AWG Lug Terminal Crimpers.
• Wire Hook and Spudger.
• #4 and #6 Slotted Screwdrivers.
• #1 Phillips Screwdriver.
• SOG Knife with ½ Serrated BladeA.
• 3-in-1 File and Bottle Opener.
• 7/16” and 3/8” Nut Drivers.
• Ruler and Lanyard.
• Leather Sheath Included.
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
PowerPlay™ PT-540
234
Cat. No.
Description
PA6520
PowerPlay™ PT-540
SPECIFICATIONS
PA4945 PowerPlay Grip Pack Kit
Contains the tools you need to install or
maintain data and voice patch panels
and outlets. See page 338 for details.
Length
Closed
Open
Weight
•
•
•
5” (127 mm)
7.5” (191 mm)
10.4 oz. (295 g)
•
•
•
•
•
•
•
www.greenlee.com
PowerPlay™ PT-525
Bits not
included
PowerPlay™ PT-510
Cat. No.
Description
PA6510
PowerPlay™ PT-525
SPECIFICATIONS
Length
Closed
Open
Weight
4.75” (121 mm)
7” (178 mm)
9.6 oz. (272 g)
PA6500
PowerPlay™ PT-510
Length
Closed
Open
Weight
4.25” (114 mm)
6” (152 mm)
7.5 oz. (227 g)
Cat. No.
Description
PA6511
PA6512
PA6524
PA6514
PA6515
PA6516
PA6518
PA6519
#4 Slotted Screwdriver/Bottle Opener
¼” Drive
StopLock™
Telephone Unwrap Bit
Telephone Wrap Bit
¼” Socket Adapter
PT-510 Leather Sheath
PT-525/PT-540 Leather Sheath
PA6503
PA6504
PA6505
PA6506
PA6507
PA6508
PA6509
= new product
= Replacement Part
= Accessory
235
INTERNATIONAL
Description
110 Punchdown Blade with 18/20/22/24 AWG
Strippers
66 Punchdown Blade with
18/20/22/24 AWG Strippers
Wire Hook and Spudger
SOG Knife with ½ Serrated Blade
Drywall Saw
3-in-1 File/#6 Slotted Screwdriver
Scissors
#1 Phillips Screwdriver
Replacement Handle Cover (1)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
PA6501
CANADA
SPECIFICATIONS
USA
Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
18 Tools-In-One:
• Needle Nose & Gripping Pliers.
• 110 Punchdown Tool.
• Romex® Wire Cutter.
• #4 & #6 Slotted Screwdrivers.
• #1 Phillips Screwdriver.
• SOG Serrated Knife.
• Drywall Punch.
• 4 Wire Strippers - 18/20/22/24 AWG.
• 3-in-1 File.
• Bottle Opener.
• Ruler.
• Leather Sheath included.
PA6502
Communications
24 Tools-In-One:
• Needle Nose & Gripping Pliers.
• 110 & 66 Punchdown Tools.
• Romex® Wire Cutter.
• UTP Stripper.
• 6 Wire Strippers - 12/14/18/20/22/24 AWG.
• Drywall Punch & Saw.
• #4 & #6 Slotted Screwdrivers.
• #1 Phillips Screwdriver.
• 1/4” Square Drive with Hex Bit Adapter.
• SOG Serrated Knife.
• 3-in-1 File.
• Wire Hook & Spudger.
• Bottle Opener.
• Ruler.
• Leather Sheath included.
MADE FOR THE TRADE!™
Round Cable Cutters
• Cuts solid or stranded cable up to AWG 6.
• Precise and effortless cuts.
• Round cutting form won't deform cables.
• Ideal for UTP and Coax, RG58, RG59 and RG6/6Q;
RG7 and RG11 with PA1175.
Communications
PA1175
Cat. No.
Description
PA1175
PA1179
Contour Round Cable Cutter
Dual-Contour Round Cable Cutter
PA1179
Center Conductor Cutter
• Precisely trims the center conductor of coaxial cable to a standard
length of 3/16" (5 mm).
• Cushioned-grip handle for comfortable use.
• Heat-treated for long life.
Cat. No.
45481
UPC No.
45481
Description
Center Conductor Cutter
SPECIFICATIONS
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Stamped from high-carbon tool steel
Rust-resistant black oxide finish
236
Cable Cutter, 8 AWG
• Designed to cut solid, stranded wire up to 8 AWG (10 mm²)
and multi-conductor cable up to 1/2" (12.7 mm) in diameter.
• Curved cutting blades ensure an easy cut.
• Economically priced.
• Cushioned-grip handle for comfortable use.
• Heat-treated for long life.
• Stamped and precision ground from high-carbon tool steel.
• Return spring.
• Locking latch.
• Rust-resistant black oxide finish.
Cat. No.
UPC No.
Description
45482
45482
Cable Cutter
45471 Professional Installation Kit
This complete kit includes our 8 AWG Cable Cutter plus all the tools,
connectors and tests for installing and maintaining most types of
communications cabling. See page 353 for details on
our Professional Installation Kit.
www.greenlee.com
Cable Cutter
• Easily cuts heavier copper and aluminum cables up to 2/0 (70 mm²).
• Plastic coated, high-leverage handles for easier cuts.
• Heat-treated for long life.
• Made of heavy-duty forged steel.
• Precision-ground, shear-action, curved cutting blades.
• Rust-resistant black oxide finish.
• Made in Japan.
UPC No.
Description
727
31291
Cable Cutter
Cable Splicer’s Knife and Splicer's Snips
• Cuts cable, telephone wire and strips insulation.
• Tough, tempered steel knife blade holds its edge longer.
• Full-sized knife handle provides greater comfort.
• Knife has a short, coping-type blade made of the finest cutlery steel.
• Scissors have an upper blade with two stripping notches to strip
most insulations from 19-24 AWG.
PT-K01
Cat. No.
PT-T01
08704
08707
08708
08702
PT-K01
PT-T01
PT-T02
PT-C01
PA1931
PT-T02
UPC No.
Description
Scissors and Knife Kit with Two-Pocket Pouch
Cable Splicer’s Knife
Electrician’s Snips
Two-Pocket Leather Pouch
Datacomm Snips
PA1933
PA1931
Snips & knife in leather pouch
Snips only
SPECIFICATIONS
Kit
Knife
Scissors
Pouch
= Replacement Part
= Accessory
8 oz. (228 g)
3 oz. (85 g)
2 oz. (57 g)
2 oz. (57 g)
237
INTERNATIONAL
Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
CANADA
• Leather pouch slotted to fit 2” (51 mm) belts.
• Datacomm scissors feature an ergonomic design for the professional user.
• Utility knife has a full-size, no-slip textured handle.
• Knife designed to stay sharp and fit comfortably in your hand.
Tel: 800.435.0786
Fax: 800.524.2853
Datacomm Snips & Knife Kit
USA
Tel: 800.435.0786
Fax: 800.451.2632
PA1931
= new product
Communications
Cat. No.
MADE FOR THE TRADE!™
Wire Strippers/Cutter
Communications
• Precision-ground blades ensure consistent stripping and cutting.
• Heat-treated for long life.
• Cushioned-grip vinyl handle for comfortable use.
• Serrated nose grip for wire pulling and straightening.
• Stamped from high-carbon tool steel.
• Pivot joints have hardened steel bushings.
• Rust-resistant black oxide finish.
Cat. No.
UPC No.
Description
1916
1917
1918
31891
31890
31889
20-10 AWG (0.8 to 2.6 mm dia.) Solid Wire
26-16 AWG (0.4 to 1.3 mm dia.) Solid Wire
30-22 AWG (0.25 to 0.64 mm dia.) Solid Wire
*Do not use on live circuits.
Pro Wire Strippers
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
1950
238
1955
• Strips the outer jacket off both solid and stranded wire.
• Machined stripping stations with a positive stop provide
precise stripping diameters.
• Ergonomically designed, extra-long cushioned handles
add superior comfort and reduce hand fatigue.
• Long curved cutter blades reduce force required by 25%
and can cut NM in a single cut.
• Lock tab protects cutting edges during storage.
• Pliers nose for working with small nuts and pulling wire.
• Hole in jaws for looping wires.
• Opening stop prevents spring from disengaging.
• Easy-to-read graphics.
• Cuts screws.
Cat. No.
UPC No.
Description
1950
1951
1955
1956
06852
06853
06857
10300
Pro Wire Stripper 10-18 AWG
Pro Wire Stripper 22-32 AWG
Pro Plus Wire Stripper, 10-18 AWG
Pro Plus Stripper 8-16 AWG
*Do not use on live circuits.
www.greenlee.com
GripP-Strippers 10 & 20
Cat. No.
Description
PA1117
PA1118
PA1123
GripP 10 cutter/stripper (22-10 AWG/.34-6 mm2)
GripP 20 cutter/stripper (30-20 AWG/.05-.5 mm2)
Wire Stipper Bundle, includes both PA1117 and PA1118
SPECIFICATIONS
Dimensions
Weight
7.1" L x 2.25" W x .65" D (180 mm x 57 mm x 17 mm)
6.5 oz. (185 g)
Communications
• Head of tool and handles designed at optimum 22º angle to prevent
awkward wrist bends.
• Spring-loaded open.
• Contoured wire stripping areas precision ground for accuracy.
• Non-scoring strip and smooth wire cutting.
• Features screw cutter and wire loops embedded in frames.
• Built-in safety lock.
• Gripping jaws on front of tool.
• PA1117 will work on Romex household cable.
• Not for use on steel or armored wire and cable.
*Do not use on live circuits.
Flat Cable Cutter
• Cut flat satin cables easily and quickly.
• Gripping pliers at tip of tool.
• Dual-durometer grips for improved comfort and control.
Cat. No.
Description
PA1181
Flat Cable Cutter
Description
Kwik Stripper Flat Telephone Cable Cutter/Stripper
239
= new product
= Replacement Part
= Accessory
INTERNATIONAL
45480
Typically used
for Modular Plug
Connectors
(See page 265)
UPC No.
45480
CANADA
45480
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Designed to cut and strip flat modular telephone cables (Silver Satin).
• Built-in cable stop/guide for consistent strip length.
• Heat-treated for long life.
• Cushioned-grip vinyl handle for comfortable use.
• 2- to 10-conductor capacity.
• Stamped from high-carbon tool steel.
• Rust-resistant black oxide finish.
USA
Tel: 800.435.0786
Fax: 800.451.2632
Kwik Stripper Flat Telephone Cable Cutter/Stripper
MADE FOR THE TRADE!™
Combo UTP/Coax SureStrip™
Communications
• Professional all-in-one cutter/stripper for coaxial and
twisted pair cables.
• Cuts and strips multiple cable types:
– Coax: RG6, RG6 Quad and RG59.
– Twisted Pair (UTP/STP): Cat6, Cat5e and Cat5.
• Easy-to-use combination cutter/stripper.
• Adjustable stripping blade for UTP/STP;
accommodates different insulation thicknesses
without damaging conductors.
• Self-regulating cassette blade prevents nicks.
• Coax blade cassette is removable to adjust stripping
depth of both blades with hex key included.
(Note: Hex key stores securely in bottom of tool)
• Contoured finger grips for cutting power.
• Lanyard hole for wrist strap, key chain, etc.
Cat. No.
Description
PA1119
PA2119
PA2120
Combo UTP/Coax SureStrip™
Coax Blade Cassette
UTP Cut/Strip Blade
SPECIFICATIONS
Weight
Length
2.5 oz. (71 g)
4.53” (115 mm)
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Data SureStrip™
• Cuts and strips multiple cable types:
– 4-, 6- and 8-conductor flat satin cables.
– 4-, 6- and 8-conductor UTP/STP data cables.
– 25-pair UTP/STP data and telephone cables.
• Multi-conductor round bundled cables with a
maximum diameter of .5” (12.7 mm).
• 14-8 AWG (2.5-75mm2) wire.
• Nylon reinforced ABS plastic with stainless steel blade.
• Fully adjustable with simple thumb screw.
• Self-regulating to prevent nicking.
• Contoured finger grips for power cutting.
• Lanyard holes for wrist straps or key chains.
• Small and compact, slips right into a pocket.
• Works left or right handed.
Cat. No.
Description
PA1116
Data SureStrip™
USA
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
240
Weight
Length
2.5 oz. (71 g)
4.53” (115 mm)
www.greenlee.com
CST vario Stripper
• Most flexible coax stripping tool on the market.
• Easy to set up and adjust.
• Two- and three-level stripping.
• Minimum center-to-center strip length is 0.13” (3.2 mm).
• Maximum total strip length is 0.67” (17 mm).
• Adjustable blade positioning in 0.04” (1 mm) increments.
• Lifetime warranty on frame only.
PA3242
Description
PA3240
PA3242
CST vario stripper
Replacement blade holder, blades & allen hex key
SPECIFICATIONS
Weight
Length
2.8 oz. (79 g)
4.57" (116 mm)
*Not recommended for use on LMR or Teflon cables.
Communications
Cat. No.
PA3240
CST Strippers
Common 2- & 3-piece
Y-block –
inserts into tool to tighten up
rollers for smaller cable sizes
CATV "F" connectors
Kings, Amphenol 3-piece
ADC, Amphenol HDTV
PA2245
PA2240
= new product
= Replacement Part
= Accessory
PA2241
PA2248
241
INTERNATIONAL
CST Green - 3 Level (A=.279, B=.201)
Green Blade Cassette only
CST Blue - 2 Level (A=.256)
Blue Blade Cassette only
CST Brown - 3 Level (A=.295, B=.137)
Brown Blade Cassette only
CST Orange - 3 Level (A=.327, B=.146)
Orange Blade Cassette only
CST Black - 3 Level (A=.344, B=.094)
Black Blade Cassette only
CST Frame only
CST Memory Cartridge only
CANADA
PA1240
PA2240
PA1241
PA2241
PA1243
PA2243
PA1247
PA2247
PA1248
PA2248
PA1250
PA2245
USA
COMMon uses
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Fixed blade system that accommodates 0.1"-0.315" (2.5-8.0mm) cable
diameters including RG58/59/62AU, RG6, RG6 Quad, RG174,
Belden 1505A, 1855A and 8281.
• Cam adjustment ensures precise and repeatable hold on cable.
• Memory blocks reduce set-up time and are easy to interchange and mark
for various applications.
• Blades are two-sided for longer use.
• No cable jacket distortion during stripping process.
• Blade cassettes easy to change.
• Lifetime warranty on frame only.
MADE FOR THE TRADE!™
CST Pro Coax Stripper
Communications
• New patent-pending coax stripping system for precision & accuracy
• Works with a wide range of cable diameters from .1”-.315” (2.5-8.0mm)
including: RG58/59/62AU, RG6/6QS, RG174, Belden 1505A, 1855A & 8281
and mini-coax.
• Pre-set for standard 2- and 3-level strip lengths
• Coax stripper designed for pros requiring precision, versatility & ease of use.
• Reversible-rollers easily adjust for various cable sizes including mini-coax.
• Dual roller mechanism perfectly centers cable & applies equal pressure to
eliminate cable distortion.
• Quick-change pre-set blade cassettes.
• Cam adjustment ensures precise hold on cable.
• Fixed blade cassettes pre-set for standard 2- and 3-level strip lengths
• Interchangeable blades reduce set-up time.
• Lifetime warranty on frame only.
PA2282 3 Level
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
PA2284
Reversible Rollers
242
Blade Adjustment Screws
Cat. No.
Description
COMMon uses
PA1280
PA2280
PA1281
PA2281
PA1282
PA2282
PA1283
CST Pro Green 3-level (A=.279, B=.201)
Green Blade Cassette only
CST Pro Orange 3-level (A=.327, B=.146)
Orange Blade Cassette only
CST Pro Black 3-level (A=.344, B=.094)
Black Blade Cassette only
CST Pro Blue 2-level (A=.250)
Common 2- & 3-piece
PA2283
PA1285
PA2284
Blue Blade Cassette only
CST Pro Frame only
CST Pro Rollers only
Kings, Amphenol RFX 3-piece
ADC, Kings, Amphenol HDTV, Mini's
Standard RG6/6QS & RG59,
CATV "F", Mini's
www.greenlee.com
LC CST Strippers
• Self-regulating tension.
• Adjust cutting depth on each blade for varying cable thicknesses with the
included hex key.
• Pre-set for common strip lengths.
• Blades adjust for strip dimensions other than our standard pre-set units*.
Description
PA1255
PA1256
PA1257
PA1258
PA2263
LC CST-58/59 – 2- & 3-Level, Adjustable
LC CST-11 – 2- & 3--Level, Adjustable
LC CST CATV "F" – 2-Level
LC CST-Mini
Replacement Blade
SPECIFICATIONS
PRESET STRIP LENGTHS*
CABLE USAGE
LC CST-58/59
0.315” outer jacket
0.157” inner dielectric
0.315” outer jacket
0.157” inner dielectric
RG58, RG59, RG62 AU & RG6
LC CST CATV “F”
0.236” outer jacket
LC CST-Mini
0.344” outer jacket
0.094” inner dielectric
RG59, RG6 & RG6 QUAD CATV”F”
(preset for RG6 CATV “F”)
RG178, RG179, RG188, AT&T
735(A), NT735, Belden 1855A,
Belden 8218, RG180, RG187,
RG188A, RG405 and more
LC CST-11
RG8, RG11 & RG213
Communications
Cat. No.
*To adjust strip lengths simply change blade locations in the lower jaw to attain the following:
.157” (4 mm), .236” (6 mm), .315” (8 mm), .394” (10 mm) and .472” (12 mm)
Not recommended for use on LMR or Teflon cables.
Kwik Stripper Coax Stripper — 2 level and 3 level
Kwik Stripper Coax Stripper - 2 Level
Kwik Stripper Coax Stripper - 3 Level
Cartridge - 2 Level
Cartridge - 3 Level
45577 3 Level
Typically used for BNC-type connectors
(See page 252).
Frame accepts both 2 and 3 level cartridges.
= new product
= Replacement Part
= Accessory
243
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
45576 2 Level
Typically used for F-type connectors (See pages 251).
Frame accepts only 2 level cartridges.
CANADA
Description
45576
45577
45040
45039
USA
UPC No.
45576
45577
45040
45039
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Designed to provide precise, repeatable strips consistently.
• Prepares RG58, RG59, RG62, RG6 and many other types of coax cable.
• Strips braid and dielectric to 1/4" (6.4 mm).
• Blades are easily replaced in the field.
• Blade adjustment for cutting depth.
• Replaceable and interchangeable blade cassettes.
MADE FOR THE TRADE!™
Kwik Stripper Twisted Pair Stripper
• No tool is better for trimming the jacket from twisted pair cable
without damaging the individual conductors.
• Blade depth adjustment ensures precise cutting depth.
• Blade penetration controlled by tension loop.
• Strip length gauge.
• Made in the USA.
Cat. No.
244
INTERNATIONAL
CANADA
UPC No.
45579
Description
Kwik Stripper Twisted Pair Stripper
45579
Typically used for Modular Plug Connectors (See pages 264-265)
Kwik Stripper CATV Cable Stripper
• Designed for the professional CATV cable installer, this stripper is perfect
for high volume and uses replaceable stripping cartridges for RG6, RG59,
RG11 and RG7 CATV cables.
• Pre-measured stops eliminate time-consuming measuring and trimming.
• No adjustments needed.
• Spare cartridge holder is conveniently built into the tool.
• Included with the tool, the RG6/RG59 cartridge strips
cable jacket and dielectric to 1/4" (6.4 mm).
• Included with the tool, the RG11/RG7 cartridge strips
cable jacket and dielectric to 1/4" (6.4 mm).
• Extra-large finger hole.
• Made in the USA.
Cat. No.
UPC No.
Description
45578
45580
45581
45578
45580
45581
Kwik Stripper CATV Cable Stripper
Cartridge RG6/RG59
Cartridge RG11/RG7
45578
Typically used for F-type Connectors (See pages 264-265)
Kwik Stripper CATV/UTP Stripper
• Used for both unshielded twisted pair (UTP) and coaxial cabling,
this tool reduces the number of tools needed without any adjustments.
• Switching from four pair UTP to RG6 or RG59 is simple –
just change cartridges.
• Cartridges are color-coded for quick identification; blue for UTP
and black for coax.
• Pre-measured stops eliminate time-consuming measuring and trimming.
• UTP cartridge strips four-pair UTP without scoring the
individual conductors.
• Spare cartridge holder is conveniently built into the tool.
• Included with the tool, the RG6/RG59 cartridge strips
the cable jacket and dielectric to 1/4" (6.4 mm).
• Extra-large finger hole.
• Made in the USA.
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Communications
45579
45677
Typically used for F-type connectors (See pages 251)
and Modular Plug connectors (See pages 264-265).
The most versatile stripper in the industry.
Cat. No.
UPC No.
Description
45677
45667
45580
45581
45677
45667
45580
45581
Kwik Stripper CATV/UTP Stripper with Both Cartridges
Cartridge UTP
Cartridge RG6/RG59
Cartridge RG11/RG7
www.greenlee.com
AM 25 Slitter
• Strips and slits 0.18" to 1.0" (4.5-25mm) diameter Round Cables.
• Adjustable cutting depth.
• Swivel blade for circular, longitudinal and spiral cuts.
• Spare blade in handle.
• Cable holding clip with integrated edge for removing slit insulation.
• Laser-trimmed, stainless-steel blade for long use.
• Slits PVC, Teflon and THHN.
• Perfect for armored cable.
Description
AM 25
Replacement blade
SPECIFICATIONS
Weight
Length
4.7 oz. (133 g)
5.3" (135 mm)
NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations
AM 35 Slitter
Communications
Cat. No.
PA1820
PA2109
• Strips and slits 1.0" to 1.4" (25-35mm) diameter Round Cables.
• Adjustable cutting depth for insulation up to 0.18” (4.5 mm) thick.
• Swivel blade for circular, longitudinal and spiral cuts.
• Spare blade in handle.
• Cable holding clip with integrated edge for removing slit insulation.
• Laser-trimmed, stainless-steel blade for long use.
• Slits PVC, Teflon and THHN.
Description
PA1821
PA2109
AM 35
Replacement blade
Weight
Length
5 oz. (141 g)
5.5" (140 mm)
NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations
Universal Slitter
Universal splitter
Replacement blade
SPECIFICATIONS
Weight
Length
7 oz. (200 g)
5.7" (145 mm)
NOTE: Do not use on live circuits. Not for polyethylene, polypropylene or XLP insulations
= new product
= Replacement Part
= Accessory
245
INTERNATIONAL
PA1822
PA2109
CANADA
Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Strips and slits 0.18" to 1.0" (4.5-25mm) diameter Round Cables.
• Precision stripping and slitting of rubber, PVC, nylon and
most insulation materials.
• Adjustable depth of cut.
• Circumferential, longitudinal and spiral cuts.
• Cable is supported during use.
• Cable support arm edge is used to pry off thick insulation.
• Laser-trimmed, stainless-steel blade for long use.
• A perfect tool for mid-point taps.
• Spare blade included.
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
USA
Cat. No.
MADE FOR THE TRADE!™
Pocket Cable Stripper
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Communications
• Specifically designed for stripping power and telecommunications
cables from 3/4" to 1-1/2" in diameter (19 mm to 40 mm).
• Strips solid conductor, stranded conductor and multiple
conductor cables.
• Easy blade depth adjustment.
• Blade rotates for circular, longitudinal and spiral cuts.
246
Cat. No.
UPC No.
Description
1903
07915
12679
07915
Pocket Cable Stripper
Cutting Blade (Pack of 2)
Coax Connector Insertion Tool
• Used in CATV applications, the Insertion Tool holds F- and BNC-style
connectors securely in place allowing the installer to seat the connector
properly on the cable.
• Prevents damage to center conductor.
• Screwdriver bit can be removed to allow the ratcheting screwdriver
to be used with standard bits.
• Screwdriver bit can be purchased separately for use in standard
ratcheting screwdrivers.
• BNC screwdriver bit sold separately for use with BNC connectors.
Cat. No.
UPC No.
Description
45516
45517
45518
45516
45517
45518
Coax Connector Insertion Tool with F-style Connector Bit
Bit, F-style Connector
Bit, BNC-style Connector
45516
Use with F-style and BNC-style Connectors
(See pages 251 - 252).
Cable TV “F” Flaring & Attachment Tool
• Flares RG59, RG6 and RG6 Quad Cable types.
• Works with CATV "F" connectors.
• Save time on cable TV and satellite installations.
• Flare the shield braid back from the dielectric without nicking your finger.
• Make connections faster and easier with properly prepped cable.
• Attachment tool enables you to hold the connector comfortably to insert
onto cable.
Cat. No.
Description
PA1927
Cable TV "F" Flaring & Attachment Tool
www.greenlee.com
Coax 3-Way Tool
• Flares RG6 and RG6 Quad Cable types.
• Flares shield braid back from the dielectric without nicking your fingers.
• Attachment tool enables you to hold the connector comfortably to insert
connector onto cable.
• Extraction tool to assist in coupling connector to port or to assist in
uncoupling from port.
• Works with CATV "F" connectors.
Description
PA1928
Coax 3-Way Tool
BNC Coax Multi-Tool
• Flaring tool for RG59 cables.
• BNC Insertion holder.
• Extraction tool for BNC connectors.
Cat. No.
Description
PA1930
BNC Coax Multi-Tool
Communications
Cat. No.
Cat. No.
Description
PA1917
RG59/6/6QS flaring tool
PA1916
Cat. No.
Description
PA1908
PA1907
PA1916
CATV 8" (203 mm)
BNC 8" (203 mm)
BNC 12" (305 mm)
SPECIFICATIONS
Weight
Length
= new product
= Replacement Part
= Accessory
4 oz. (114 g)
4" - 12" (102 mm - 305 mm)
247
INTERNATIONAL
PA1908
CANADA
PA1907
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Chrome finish.
• Comfortable driver-style plastic handle.
• 1908 CATV “F” is a combination tool. Use the hex socket to easily
remove and insert the connectors. Use the threaded end to hold the
connector while you insert cable for connectors. Helps to prevent finger
injuries.
Tel: 800.435.0786
Fax: 800.524.2853
BNC and CATV “F” Extraction Tools
Tel: 800.435.0786
Fax: 800.451.2632
• Works on RG59 and RG6/6 Quad cable.
• Flares shield away from center dielectric.
• Saves time on CATV and satellite installation
USA
RG59/RG6/RG6 Quad Flaring Tool
MADE FOR THE TRADE!™
SealTite® ProM Coax Crimper
Communications
• Crimps weatherproof linear CATV “F”, BNC, RCA & right- angle
compression-type connectors from all manufacturers.
• Works with RG6, RG6 Quad, RG59 & RG62AU coax cables.
• Versatile tool - accommodates multiple connectors.
• The only tool with a single, reversible head eliminating need for adapters.
• No additional parts, attachments or other tools required to change from
one crimp style to another.
• Quickly & easily adjust crimp height.
• Once properly set, lock with adjustment lock.
Cat. No.
Description
PA1559
SealTite® ProM Coax Crimper
SPECIFICATIONS
Weight
Dimensions (in.)
Dimensions (mm)
Rated Life Cycle
17 oz. (485 g)
7.76" W x 3.26" L x 30.5" D
187 W x 82.8 L x 30.5 D
30,000 (unloaded)
SealTite® 59/6 CATV “F” Compression Crimper
• Performs compression crimping of waterproof CATV “F” connectors for
RG59 and RG6/RG6 Quad 75 ohm coaxial cables.
• Works on Augat/T&B Snap-N-Seal™ connectors, AIM CATV “F” waterproof
connectors and Paladin SealTite™ connectors.
• Fully ratcheting one-cycle crimp function.
Cat. No.
Description
PA901024
SealTite® Crimper
Weight
Dimensions (in.)
Dimensions (mm)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
SPECIFICATIONS
248
15.9 oz. (465 g)
8.5" W x 1.7" L x 1.0" D
216 W x 43 L x 25.4 D
Compression Crimping Tool
• Requires less force than a traditional hex-style crimp.
• Ergonomic Sanoprene grips reduce hand fatigue.
• Terminates most compression-style connectors.
• Fully adjustable for crimping different coax connector types.
Cat. No.
UPC No.
Description
60807
60807
Compression Crimping Tool
www.greenlee.com
SealTite® Cable TV “F” Compression Connectors
• Large hex nut for easy installations.
• Patented design with 360º cable gripping sleeve.
• Solid brass construction with nickel plating to prevent UV degradation.
RG59
RG6 &
RG6 Quad
RG6 Quad
Cat. No.
Cat. No.
Cat. No.
10 Pack Clamshell
20 Pack Clamshell
50 Pack Jar
100 Pack Bulk
PA9642
PA9610
PA9645
N/A
PA9643
PA9611
PA9646
PA9614*
PA9644
PA9612
PA9647
PA9615
*Also available in retail jar pack, PA9687.
SealTite® RCA Compression Connectors
• Patented design with 360º cable gripping sleeve.
• Full gold contacts for low signal loss.
• Includes slip-on color bands for easy cable identification.
A set of bands includes 4 red, 2 green, 2 blue, 2 yellow
and 2 white per ten connectors.
• Constructed from solid brass with nickel plating.
RG59
RG6 &
RG6 Quad
Description
Cat. No.
Cat. No.
10 Pack Clamshell
50 Pack Jar
PA9720
PA9721
PA9714
PA9716
Description
Cat. No.
Cat. No.
10 Pack Clamshell
50 Pack Jar
PA9730
PA9731
PA9715
PA9740
Description
RG59
RG6
RG6 Quad
Cat. No.
Cat. No.
Cat. No.
PA9677
PA9680
PA9704
PA9678
PA9681
N/A
10 Pack Clamshell PA9676
50 Pack Jar
PA9703
100 Pack Bulk
N/A
= new product
= Replacement Part
= Accessory
249
INTERNATIONAL
• Crimp-on style cable TV “F” connectors.
• All-brass with nickel plating for durability.
• Designed for indoor use.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Hex Crimp Cable TV “F” Connectors
CANADA
RG6 &
RG6 Quad
Tel: 800.435.0786
Fax: 800.524.2853
RG59
USA
• Patented design with 360º cable gripping sleeve.
• Full gold contacts for low signal loss.
• Includes slip-on color bands for easy cable identification.
A set of bands includes 4 red, 2 green, 2 blue, 2 yellow
and 2 white per ten connectors.
• Constructed from solid brass with nickel plating.
Tel: 800.435.0786
Fax: 800.451.2632
SealTite® BNC Compression Connectors
Communications
Description
MADE FOR THE TRADE!™
Twist-On Cable TV “F” Connectors
Communications
• Connectors twist onto cable for quick installation.
• Sharp threads firmly grip cable for good connections.
• EZ-SPIN™ hex nut for easy installation.
RG59
RG6
Description
Cat. No.
Cat. No.
10 Pack Clamshell
PA9694
PA9695
Push-On Cable TV “F” Connectors
•
•
•
•
No crimp tool required. Simply strip cable and push connector onto it.
Special knurled nut offers superior grip for strong connection.
All brass, nickel-plated for durability and low signal loss.
For indoor usage only.
RG59
RG6
Description
Cat. No.
Cat. No.
10 Pack Clamshell
50 Pack Jar
PA9682
PA9684
PA9683
PA9685
Other Coaxial Connectors
Connect CATV “F” cables to RCA plugs.
• Eliminate the need for new cabling
• Solid brass with nickel plate
• 75 ohm rating
PA9719
PA901074
250
Description
PA9719
PA901074
Adapter, CATV “F” (female) to RCA (male) (Qty. 10)
Adapter, CATV “F” (female) to BNC (male) (Qty.1)
• Provides a positive ground connection between two coaxial shields
and the ground wire.
• Creates a connection for the dissipation of any unwanted electrical
charges.
• Solid nickel plated zinc alloy.
• High-performance, 360º contact, for up to 3.0 GHz.
• Suitable for satellite or cable TV.
• UL/CSA approved.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Dual Port Ground Block
Cat. No.
Cat. No.
Description
PA9675
Dual Port Grounding Block
Cable TV “F” Terminators
• Solid brass body with nickel plating.
• ½ watt resistor (5% tolerance); 75 ohm.
Cat. No.
Description
PA9686
CATV "F" Terminators (10)
Female Splice Adapter
• Cable TV “F” female-to-female barrel adapter.
• Designed for performance up to 3.0 GHz.
• Gold-plated contacts.
• 2 pack.
Cat. No.
Description
PA9675
Female Splice Adapter
www.greenlee.com
F-Style Coaxial Connectors System
• Nickel plated for corrosion resistance
f-style Connectors
description
connector type cable type
‘F’ Connector Twist-on
‘F’ Connector Crimp
‘F’ Connector Twist-on
‘F’ Connector Crimp
‘F’ Connector Crimp
‘F’ Connector Crimp
RG59
10/Pack
50/Pack
45735
45749
45735
45749
45576
45578
45677
45576
45578
45677
45576
45576
RG59
10/Pack
45734
45734
45578
45578
50/Pack
45748
45748
45677
45677
RG6
10/Pack
50/Pack
45327
45328
45327
45328
45576
45578
45677
46801
46801
46801
46801
46801
46801
46801
46801
45576
45578
45677
45576
45576
RG6
10/Pack
45315
45315
45578
45578
50/Pack
45316
45316
45677
45677
45576
45576
RG59 Quad-shield
10/Pack
45321
45321
45578
45578
50/Pack
45322
45322
45677
45677
45576
45576
RG6 Quad-shield
10/Pack
45323
45323
45578
45578
50/Pack
45324
45324
45677
45677
Communications
recommended tool
stripper crimper
quantity cat. no. upc no. cat. no. upc no. cat. no. upc no.
F-Style adapters
description
‘F’ Female Adapter
5/Pack
45325
45325
‘F’ Terminator
5/Pack
45326
45326
= Accessory
Description
XFC-6-10
XFC-6-50
XFC-6-100
XFC-6Q-10
XFC-6Q-50
XFC-6Q-100
XFC-59-10
XFC-59-50
XFC-59-100
12578
12586
12587
12589
12590
12591
12593
12594
12595
RG6 - 10 Pack
RG6 - 50 Pack
RG6 - 100 Pack
RG6 Quad - 10 Pack
RG6 Quad - 50 Pack
RG6 Quad - 100 Pack
RG59 - 10 Pack
RG59 - 50 Pack
RG59 - 100 Pack
251
INTERNATIONAL
= Replacement Part
UPC No.
CANADA
= new product
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Dual-protection with external sleeve and internal o-ring.
• 360-degree sleeve crimp prevents moisture migration.
• O-ring provides internal seal when the 7/16" nut is tightened.
• Use for both indoor and outdoor applications.
• Color-coded sleeves for easy identification of cable compatibility.
• 70 lbs pull-out strength exceeds SCTE cable retention standard IPS-SP-405.
• Terminates easily using any compression tool.
Tel: 800.435.0786
Fax: 800.524.2853
XFC Series Weatherproof Compression F-Style Connectors
USA
quantity cat. no. upc no.
Tel: 800.435.0786
Fax: 800.451.2632
Adapter/terminator type
MADE FOR THE TRADE!™
BNC Coaxial Connectors
• Gold-plated, captive center contact provides long life
and reliable performance.
• Precision manufactured from machined brass and nickel plated
for corrosion resistance.
BNC Connectors
description
connector type cable type
Communications
recommended tool
stripper crimper
quantity cat. no. upc no. cat. no. upc no. cat. no. upc no.
BNC Crimp Plug
RG58 Thinnet PVC
5/Pack
45730
45730
45577
45577
46800
46800
BNC Crimp Plug
RG58 Thinnet Plenum
5/Pack
45731
45731
45577
45577
46800
46800
BNC Crimp Plug
RG59/62 PVC
5/Pack
45732
45732
45577
45577
46800
46800
BNC Crimp Plug
RG59/62 Plenum
5/Pack
45733
45733
45577
45577
46800
46800
BNC adapters
description
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Adapter type
252
quantity cat. no. upc no.
BNC Tee-style Plug to Jack/Jack
1/Pack
45727
45727
BNC Straight Jack to Jack
1/Pack
45728
45728
BNC terminators
description
Adapter type
quantity cat. no. upc no.
BNC Terminator 93 OHM
1/Pack
45726
45726
www.greenlee.com
Cable TV Splitters
• Split analog and digital cable TV signals to 2 to 4 outlets.
• HDTV compatible and works with cable modems.
• 75 ohm impedence.
• 5-1000 MHz bandwith.
• “F”-style female ports.
PA9688
PA9689
Description
PA9688
PA9689
PA9690
2-Way Cable TV Splitter
3-Way Cable TV Splitter
4-Way Cable TV Splitter
PA9690
Satellite TV Splitters
• Split satellite and digital signals to multiple outlets.
• Compatible with most digital satellite brands, digital cable TV and HDTV.
• 75 ohm impedence.
• 5-2400 MHz bandwith.
• “F”-style female ports.
PA9669
PA9670
Cat. No.
Description
PA9669
PA9670
PA9671
2-Way Satellite TV Splitter
3-Way Satellite TV Splitter
4-Way Satellite TV Splitter
Communications
Cat. No.
Description
PA9673
Satellite Diplexer
= new product
= Replacement Part
= Accessory
Cat. No.
Description
PA9672
In-Line Amplifier
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Boost signals to multiple outlets or on long cable runs.
• Works with satellite dish or terrestrial antenna installations with over 50’ of
cable.
• Digital TV ready.
• 20 dB gain.
• DC 12-18V.
• 950-2400 MHz maximum bandwidth.
253
INTERNATIONAL
In-Line Amplifier
CANADA
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Combines signal from satellite dish and UHF/VHF antenna into single coax
cable output.
• 5-860 MHz antenna and 950-2450 satellite power pass.
• For RG6 or RG6 Quad.
• An additional diplexer can be used to split signals again for connection to
satellite and antenna ports on receivers.
• Diplexed signals can be distributed through an amplifier to send signal to
multiple outlets.
Tel: 800.435.0786
Fax: 800.451.2632
Satellite Diplexer
USA
PA9671
MADE FOR THE TRADE!™
VS1 Series Splitters
Communications
• Designed for digital broadcast television, digital cable television,
off-air antennas and RF distribution.
• Bandwidth - 5 MHz to 1 GHz.
• Power Passive Port - designed to pass RF and DC power from one input to
one output.
• Nickel-plated, zinc die-cast housing for excellent anti-corrosive protection.
• 100% solder-sealed tin backplate provides EMI/RFI shielding > -120dB.
• Low insertion loss.
• Printed circuit board construction ensures consistent RF performance
and excellent port-to-port isolation.
• Precision machine threaded “F” ports for perfect connector fit.
• F-Ports spaced at 1" on center to allow application of security sleeves
and window filters.
• F-Ports comply with SCTE outdoor standards.
• Mounting screws included.
Cat. No.
UPC No.
Description
VS1-2
VS1-3
VS1-4
45326
46241
46242
46243
45326
2-Way 1 GHz Splitter (1)
3-Way 1 GHz Splitter (1)
4-Way 1 GHz Splitter (1)
F-Terminator, 75 ohm (5)
SPECIFICATIONs
ELECTRICAL
I SPECIFICATIONS
Insertion Loss
In-Out
(max dB)
Return
Loss In
(min dB)
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Return
Loss Out
(min dB)
Isolation
Out-Out
(min dB)
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
VS1-2, 2-Way
3.6
4.0
VS1-3, 3-Way
4.0-7.2
4.1-7.8
VS1-4, 4-Way
7.5
8.0
470-750
750-1000
4.3
4.5
4.3/8.2
4.5/8.5
8.5
8.5
5-47
15.0
15.0
15.0
47-470
470-750
750-1000
16.0
15.0
15.0
17.0
15.0
15.0
17.0
15.0
15.0
5-47
15.0
15.0
15.0
47-470
470-750
750-1000
16.0
15.0
15.0
17.0
15.0
15.0
17.0
15.0
15.0
5-47
20.0
20.0
20.0
47-470
470-750
750-1000
21.0
20.0
20.0
21.0
20.0
20.0
21.0
20.0
20.0
Length:
Width:
254
Frequency - Range (MHz)
5-47
47-470
Height:
Housing:
RF CONNECTOR
2.3" (58mm) 3.0" (76mm) 3.0" (76mm)
1.9" (48mm) 1.9" (48mm) 1.9" (48mm)
0.6" (15mm) 0.6" (15mm) 0.6" (15mm)
Nickel Plated Zinc Die Cast
F-Type Female 75OHM
www.greenlee.com
stripax® Pro 6 & Pro 16
Now for THHN and THHW industrial insulations. The original stripax set the
industry standard for precision stripping for a decade. The new stripax®
Pro 6 and Pro 16 perform powerful stripping of standard and industrial insulations for a wire range of 28-10 AWG (.08-6 mm2) and 10-6 AWG
(6-16 mm2) respectively. The ergonomically designed, contoured handles
let you hold the tool in a natural position so stripping is comfortable and
requires less effort.
68 spring- compression
blades on Pro 6†
Adjustable wire stop to set
strip lengths
Cat. No.
Description
PA1113
PA2113
stripax® Pro 6 (28-10 AWG) (.08-6.0 mm2)
stripax® Pro 6 replacement stripping blade set
Communications
• Consistently strips heavy-duty and industrial insulations including
THHN & THHW.
• Strips standard insulations including PVC, rubber and silicone.
• Provides nick-free stripping of insulation with no damage to conductors.
• Built-in cutter provides a smooth, straight cut without distorting
the conductor.
• Fine adjustment slider on top of tool lets you adjust to the
insulation thickness.
• Handles designed for comfort and require low hand force.
• Not for Teflon or Kapton hard insulations (use part number PA1115P
mini-stripax Plus with a Teflon blade for these insulations).
• Perfect companion for any of our wire ferrule crimpers.
• Strippers carry a lifetime warranty; blade warranty is one year
for defects only.
SPECIFICATIONS
Weight
Length
5.5 oz. (156 g)
7.25" (185 mm)
*Do not use on live circuits
† 68 spring- compression blades precisely adjust to the insulation.
SureStrip® 4.0
SureStrip® 4.0
Replacement stripping blade set
SPECIFICATIONS
Weight
Length
5.2 oz. (147 g)
7.9" (200 mm)
*Do not use on live circuits.
= new product
= Replacement Part
= Accessory
255
INTERNATIONAL
PA904893
PA901022
CANADA
Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
High-quality wire stripping and cutting tool for
20-12 AWG (0.5-4.0 mm2).
• Strips stranded and solid conductors with PVC insulation.
• Strips multiple conductors and thin, ribbon-cable conductors
simultaneously.
• Built-in wire cutter.
• Precision self-adjusting blades prevent wire damage.
• Strips double-insulated cables in two work cycles.
• User-replaceable stripping blades.
• Adjustable wire stop to set strip lengths.
• Value stripper to prepare wire for wire and ferrule terminaion.
USA
Round stripping blades on
Pro 16 cut insulation cleanly
Tel: 800.435.0786
Fax: 800.451.2632
Cutter on bottom means less
hand force required
MADE FOR THE TRADE!™
mini-stripax® plus
Communications
• Strips flexible and solid conductors with PVC, Teflon, silicone and other
special insulations.
• Strips multiple conductors and thin ribbon-cable conductors simultaneously.
• Adjustable wire stop and built-in wire cutter.
• 28-18 AWG (0.80-1.0 mm2) PVC blade included.
• See replacement blades in next section.
Cat. No.
Description
PA1115P
mini-stripax® plus
SPECIFICATIONS
Weight
Length
4.0 oz. (114 g)
5.3" (135 mm)
*Strips PVC only. Do not use on live circuits.
For Teflon, order blades separately see below in mini-stripax plus Replacement Blades Section.
mini-stripax® plus Replacement Blades
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Easy to install using quick pull pins in the mini-stripax jaw.
• Includes top and bottom blades, spring and wire stop.
• Specially formed stripping blades ensure no damage to the conductor.
256
Cat. No.
Description:
PA2108
PA2140
PA2141
PA2142
PA2143
PA2144
AWG 28-18 (0.8-1.0 mm2) PVC only - White
AWG 18 (0.8 mm2) Teflon - Black
AWG 20 (0.5 mm2) Teflon - Blue
AWG 24-22 (0.22-0.34 mm2) Teflon - Green
AWG 28-26 (0.8-0.1 mm2) Teflon - Red
AWG 32-30 (0.032-0.05 mm2) Teflon - Yellow
Adjustable Wire Stripper & Cutter
• Adjustable blades from 30-10 AWG (.05-6 mm2).
• Economical tool for multiple cables.
Cat. No.
Description
PA1161
Adjustable wire stripper & cutter
SPECIFICATIONS
Weight
Length
3 oz. (86 g)
5" (127 mm)
*Do not use on live circuits.
www.greenlee.com
SurePunch® Pro Punchdown Tool
Cat. No.
PA3590
PA3584
PA3587
PA3588
PA3596
PA3597
PA3598
PA3599
PA4599
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
257
= new product
CANADA
PA3594
PA3595
Tel: 800.435.0786
Fax: 800.524.2853
PA3593
Tools without lights
SurePunch Pro PDT handle (no blade)
SurePunch Pro PDT with Double 110 blade
SurePunch Pro PDT with 110 & 66 reversible cut & punch/
punch-only blades
SurePunch Pro PDT with 1110/66 combination cut-only blade
SurePunch Pro PDT with 110 reversible cut & punch/punchonly blade
SurePunch Pro PDT with 66 reversible cut & punch/
punch-only blade
SurePunch Pro PDT with BIX™ cut-only (scissors type) blade
SurePunch Pro PDT with Krone® LSA cut-only
(scissors type) blade
SurePunch Pro PDT detachable light and batteries
USA
PA3591
PA3592
Tools with lights
SurePunch Pro PDT handle (no blade) and light
SurePunch Pro PDT with Double 110 blade and light
SurePunch Pro PDT with 110 & 66 reversible cut & punch/
punch-only blades and light
SurePunch Pro PDT with 1110/66 combination cut-only
blade and light
SurePunch Pro PDT with 110 reversible cut & punch/punchonly blade and light
SurePunch Pro PDT with 66 reversible cut & punch/punch-only
blade and light
SurePunch Pro PDT with BIX™ cut-only (scissors type)
blade and light
SurePunch Pro PDT with Krone® LSA cut-only (scissors type)
blade and light
Tel: 800.435.0786
Fax: 800.451.2632
PA3589
PA3585
PA3586
Description
Communications
• Terminate cable in single punch - including 23 AWG Cat6.
• Detachable light with long-life LED specially designed to focus the
light on the panel work area.
• Luminous intesity of the LED is 2200 mcd.
• Finger grips and non-slip rubber-embedded cushioned handle
for comfort.
• Multi-use spudger that can be used as a screwdriver or an IDC
contact insertion tool.
• Hook to feed wires through holes.
• Pick to separate bonded twisted-pair cables or to strip insulation
and cut wire.
• Adjustable HI/LO spring compression for all cable types.
LO= 27.5 lbs (122 N), HI= 37.5 lbs (167 N)
• Uses twist-and-lock style blades.
• Blade storage area in end of handle with comfortable latch cover.
MADE FOR THE TRADE!™
SurePunch® Punchdown Tools
Communications
• Cushion grip, molded to the shape of your hand, for comfort and a
sure, non-slip hold.
• Increased HI/LO impact force to meet demands of new cable
types and AWG sizes: LO= 30 lbs (133 N), HI= 40 lbs (178 N).
• For 28-22 AWG (0.08 - 0.34 mm2), solid or stranded wire.
• Uses twist-and-lock style blades.
• Cushioned heel for comfort in the palm of your hand.
• New latch cover blade storage area in end of handle.
• Lanyard holes in end.
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
PA3570
PA3571
PA3572
SurePunch PDT handle (no blade)
SurePunch PDT with 110/66 combination cut-only blade
SurePunch PDT with 110 reversible cut & punch/punch-only
blade
SurePunch PDT with 66 reversible cut & punch/punch-only
blade
SurePunch PDT with BIX™ cut-only (scissors type) blade
SurePunch PDT with Krone® :SA (scissors type) blade
SurePunch PDT with Double - 110 blade
SurePunch PDT with both 110 and 66 reversible cut & punch/
punch-only blades
SurePunch 110/66 combination cut-only blade
SurePunch 110 reversible blade
SurePunch 66 reversible blade
SurePunch BIX™ cut-only blade
SurePunch Krone® LSA cut-only blade
SurePunch Double - 110 blade
Telephone Unwrap Bit
Telephone Wrap Bit
PA3574
PA3575
PA3576
PA3579
PA4575
SPECIFICATIONS
TOOL ONLY
TOOL with Blade
Weight
Overall Length
7 oz. (200 g)
7" (196 mm)
8 oz. (242 g)
8" (203 mm)
PA6515
PA4571
PA4572
PA4573
PA4574
PA4575
PA4591
PA6514
PA6515
Impact Punchdown Tools
• For 28-24 AWG Solid or Stranded conductor.
• Standard impact compression design.
• Adjustable HI/LO settings for compression force.
• Impact force: HI= 35 lbs. (110 N), LO= 25 lbs. (155 N).
• Reversible clip-in blades (except BIX & Krone).
• Punches down with or without cut function
(except BIX & Krone).
• Spare blade stores in handle of tool (except BIX & Krone).
• Impact handle and blades available separately.
• Leather holster available to attach to belt.
PA3528
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
Description
PA3573
PA4591 PA4573 PA6514 PA4571 PA4574 PA4572
258
Cat. No.
PA4527
PA4528
PA4529
PA4530
PA4531
SPECIFICATIONS
TOOL ONLY
TOOL with Blade
Weight
Overall Length
5 oz. (142 g)
6.2" (158 mm)
6 oz. (170 g)
7.2" (183 mm)
Cat. No.
Description
PA3526
PA3527
PA3528
PA3535
PA3536
PA3532
PA4527
PA4528
PA4529
PA4530
PA4531
PA4535
Impact punchdown (tool handle only)
Impact punchdown w/66 blade
Impact punchdown w/110 blade
Impact punchdown w/630 blade
Impact punchdown w/BIX™-type blade
Impact punchdown w/Krone™-type blade
Replacement 66 blade
Replacement 110 blade
Replacement 630 blade
Replacement BIX™-type blade4530
Replacement Krone®-type blade
Replacement Krone®-LSA plus blade
www.greenlee.com
ProPunch™ 110 Multi-pair Punchdown
Cat. No.
Description
PA3560
PA3561
PA4560
PA4561
PA4562
PA4563
ProPunch 110 with 5-pair head
ProPunch 110 with 4-pair head
Replacement 5-pair head
Replacement 4-pair head
Replacement 5-pair blade cassette
Replacement 4-pair blade cassette
Communications
Terminates and cuts up to five pairs of data/voice cable at the same time!
We designed it to perform over 30,000 cycle punches and to terminate most
23 AWG cable pairs in one punch! This tool delivers more than one and a
half times the force of other multi-punchdown tools on the market today.
The rugged “no-slip” handle fits comfortably in your hand with the handle
end contoured to the heel of your hand.
• Fewer punches saves time.
• Smooth operation and rugged, comfortable handle absorbs punch recoil.
• Terminates 28-22 AWG (.08 - .34 mm2) solid or stranded wires with
single insulation.
• Cut and punch blade cassette or switch blades for punch only.
• Designed to work with 23 AWG CAT 6 cable.
SPECIFICATIONS
Dimensions
10.3” L x 1.5” W x 2” D
261 mm L x 39 mm W x 52 mm D
15.5 oz. (400 g)
Weight
Pocket Probe Pick
Probe pick for pulling wire, slicing, stripping cable and cleaning debris off
terminal panels. Small and lightweight—pen-sized with clip for carrying
in pocket.
closed
Cat. No.
Description
PA1915
Pocket probe pick
Untwist Tool
Description: Heavy Duty Keystone Tip-
PA1923
Untwist Tool
SPECIFICATIONS
= new product
= Replacement Part
= Accessory
Overall Length
3.6" (91.5 mm)
Weight
1.2 oz.(.34 g)
259
INTERNATIONAL
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Saves time by quickly and easily straightening and separating
individual conductors.
• Designed with a flat tip to insert between pairs and round edge to pull
cable through.
• Will not nick insulation or conductors.
• Handy tool can be attached to your key ring through the lanyard hole.
Tel: 800.435.0786
Fax: 800.524.2853
3 oz. (86 g)
6.5” (166 mm)
Weight
Overall Length
CANADA
SPECIFICATIONS
USA
open
Tel: 800.435.0786
Fax: 800.451.2632
• Spudger tip.
• Wire hook.
• Wire stripper and slitting tooth.
• Non-conductive scraping tip.
MADE FOR THE TRADE!™
Can Wrench
Communications
• Strips PVC insulation.
• Strips outer jacket of AWG 22/4 and 24/4 telephone cable.
• Strips insulation of AWG 22 (.34 mm2) and AWG 24 (.20 mm2) wire.
• 3/8” (9.5 mm) and 7/16” (11 mm) hex sockets for accessing panels.
• Durable shock-resistant design.
Cat. No.
Description: Heavy Duty Keystone Tip-
PA1900
Can Wrench
SPECIFICATIONS
Overall Length
7.87" (200 mm)
Weight
5 oz.(.140 g)
Punchdown Stripper
• Self-regulating strip depth.
• Fast and easy to use.
• Great for CAT-5, CAT-5e, and CAT-6 data cable.
• Built-in 110 punchdown (punch only).
Cat. No.
Description
PA1913
Punchdown stripper
SPECIFICATIONS
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
2 oz. (57 g)
4” (102 mm)
Length
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Weight
260
Non-Impact Punchdown Tools with Fixed Blades
PA3580
PA3581
• Non-impact, low-cost punchdown tools for 110, 66 & BIX.
• Works with 28-22 AWG (.08 - .5 mm2).
• Solid or stranded, single insulation wire.
• Comfortable rubber handle grip.
• Performs both cut and punch functions.
• Perfect for small jobs and the do-it-yourself installer.
• Fits in the palm of your hand.
• Typically lower in cost than replacement blades for
punchdown tools.
Cat. No.
Description
PA3580
PA3581
PA3582
110 Punchdown Tool
66 Punchdown Tool
BIX™ Punchdown Tool
SPECIFICATIONS
PA3582
Weight
Length
3 oz. (86 g)
4” (102 mm)
www.greenlee.com
Punchdown Tool
Cat. No.
46020
46021
46023
46023
UPC No.
46020
46021
46023
Description
Punchdown Tool Only
Punchdown Tool w/66 Blade
Punchdown Tool w/110 Blade
Communications
• Inserts wire for a corrosion-resistant termination and trims off
excess wire.
• Terminates 66, 110, BIX and Krone cross-connect and wall jacks.
• Spring-loaded for fast, low-effort wire seating and termination.
• Internal impact mechanism eliminates jamming for longer,
trouble-free service life.
• Adjustable low- and high-impact force settings.
• Bayonet-style blade locking mechanism.
• Neoprene pad for shock absorption.
• Spare blade storage in the handle.
• Color-coded yellow on the cut side of tool.
Replacement Blades for the Punchdown Tool
• Cut side labeled to eliminate costly punching errors.
• Made of high-carbon tool steel, heat-treated and precision-ground
for long life.
• Reversible blades for seating/cut or seating only for jumper wires.
• Rust-resistant finish.
46022
Description
46022
46024
46025
46026
46022
46024
46025
46026
66 Style Blade
110 Style Blade
BIX Style Blade
Krone Style Blade
46024
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
261
= new product
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
46010 Clip-On Twisted Pair Kit
Our Clip-On Twisted Pair Kit comes with all
the tools necessary for terminating voice
and data cable including a Punchdown Tool
with 110 blade. See page 350 for details.
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
MADE FOR THE TRADE!™
Telecom Splice Crimpers
• Side cutter for AWG 19-26 copper.
• Non-slip grips for precision control.
• Crimp capacity
– UR: AWG 19-26
– UY: AWG 22-26
– UG: AWG 19-26
PA1180 only
• Stripping cavity for AWG 22 wire.
• Needle-nose with knurled surface for gripping, wrapping and looping.
Communications
PA1180
Cat. No.
Description
PA1180
PA1178
4-in-1 Telecom Splice Crimper
Telecom Splice Crimper
PA1178
• Combination tool terminates 8-position, 6-position and 4-position
(45575 only) modular style plugs.
• No need to change crimping dies.
• Full-cycle ratchet mechanism provides consistent,
quality terminations every cycle.
• Straight action ensures uniform crimp.
• Small, compact design.
• Built-in wire cutter and stripper for flat cable.
• All-steel frame has rust-resistant, black oxide finish.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Telephone Ratchet Crimper
262
Cat. No.
45553
45575
UPC No.
45553
45575
Description
Telephone Ratchet Crimper
Telephone Ratchet Crimper
45553
Typically used for Modular Plug Connectors
(See page 264 & 265).
45469 Voice and Category 5 Data Termination Kit
This kit includes our Telephone Ratchet Crimper plus other
tools and connectors necessary for installing a voice and data
network. Everything is conveniently organized in a durable
zipper case. See page 346 for details on our Voice and
Category 5 Data Termination Kit.
45575
Typically used for Modular Plug Connectors
(See page 264 & 265). Our Telephone Ratchet
Crimper was designed with a compact head to
fit into tight spaces and ergonomic handles for
operator comfort.
www.greenlee.com
All-in-One UTP Snagless Crimper
• Cuts and strips round or flat cable.
• All metal construction.
• Dual-durometer grips for improved comfort and control.
• For standard and "snagless" RJ45 connectors.
• Also crimps RJ11/22 and RJ22 WE/SS style plugs.
Cat. No.
Description
PA1561
All-in-One UTP Snagless Crimper
• 4 crimp functions with a single tool without changing dies.
• Crimps 4-position RJ22 handset.
• Crimps 4- and 6-position RJ11/RJ12 connectors.
• Crimps 8-position RJ45 (non-keyed).
• Embedded cable cutter and stripper.
• Crimps 28-24 AWG (.08 - .20 mm2) telephone and data cables
• Advanced ratchet system.
• Precision die-cast aluminum head.
• Crimps 6-position RJ11-DEC offset type connectors (P/N 901014).
PA901014
PA901016
PA2530
All-in-One Ultra Telephone Tool AMP (Tyco)
All-in-One Ultra Telephone Tool AMP (WE/SS)
Replacement blade kit
SPECIFICATIONS
Weight
Length
19 oz. (525 g)
8.07" (205 mm)
PA1540
PA1530R
PA2530
All-in-One Pro Telephone Tool AMP (Tyco)
All-in-One Pro Telephone Tool AMP (WE/SS)
Replacement blade kit
SPECIFICATIONS
Weight
Length
= new product
= Replacement Part
= Accessory
19 oz. (525 g)
8.07" (205 mm)
263
INTERNATIONAL
Description
CANADA
PA1530R
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Crimps 4-position RJ22 connectors.
• Crimps 4- and 6-position RJ11/RJ12 connectors.
• Crimps 8-position RJ45 (non-keyed) connectors.
• Embedded cable cutter and stripper.
• Crimps 28-24 AWG (.08 - .20 mm2) telephone and data cables.
• Comfortable rubber-embedded handles.
• Built-in safety ratchet release.
Tel: 800.435.0786
Fax: 800.524.2853
All-in-One Pro Telephone Tools
USA
Description
Tel: 800.435.0786
Fax: 800.451.2632
PA901014
Cat. No.
Communications
All-in-One Ultra Telephone Tools
MADE FOR THE TRADE!™
Modular Plug Connectors
RJ45
• RJ45 8-conductor modular plugs.
• 50 micron gold plating.
• Meets or exceeds EIA/TIA specifications.
Communications
RJ11
• RJ11 6-conductor modular plugs.
• For use with stranded wire.
• 50 micron gold plating.
WE/SS-style 8P8C Connectors
RJ45
description
connector
type cable type
quantity cat. no.
10/Pack
PA9546
Cat5e, Solid or Stranded
50/Pack
PA9655
RJ45
Round, Flat or Oval
100/Pack
PA9549
RJ45
Cat3, Stranded, Round
10/Pack
PA9521
SNAGLESS Connectors
SNAGLESS
description
connector
type cable type
quantity cat. no.
RJ45
Solid or Stranded
Round, Flat or Oval
10/Pack
40/Pack
PA9588
PA9589
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
WE/SS-style 6P6C Connectors
264
RJ11
description
connector
type cable type
quantity cat. no.
RJ11
Solid or Stranded
Round, Flat or Oval
10/Pack
50/Pack
PA9520
PA9654
www.greenlee.com
Modular Plugs
We offer modular plugs for a wide variety of installations – from simple
tasks like connecting a telephone handset cord to the most demanding
requirements of Category 5 wiring.
• Gold-plated contacts provide long life and reliable performance.
• Manufactured to comply with FCC 68 guidelines.
description
recommended tool
stripper crimper combo
cat. no. upc no.
quantity cat. no. upc no. cat. no. upc no. cat. no. upc no.
45737
45750
45770
45737
45750
45770
45480
45480
RJ11 6 Contact
Flat Cable
Stranded Wire
25/Pack
50/Pack
100/Pack
45738
45751
45771
45738
45751
45771
45480
45480
DEC MMJ 6 Contact
Flat Cable
Stranded Wire
25/Pack
45739
45739
45480
45480
RJ45 8 Contact
Flat Cable
Stranded Wire
25/Pack
50/Pack
100/Pack
45740
45753
45773
45740
45753
45773
45480
45480
Handset 4 Contact
Round Cable
Solid Wire
25/Pack
50/Pack
100/Pack
45742
45755
45775
45742
45755
45775
45579
45579
RJ11 6 Contact
Round Cable
Solid Wire
25/Pack
50/Pack
100/Pack
45743
45756
45776
45743
45756
45776
45579
45579
DEC MMJ 6 Contact
Round Cable
Solid Wire
25/Pack
45744
45744
45579
RJ45 8 Contact
Round Cable
Solid Wire
25/Pack
50/Pack
100/Pack
45745
45758
45778
45745
45758
45778
RJ45 Cat 5 8 Contact
Round Cable
Solid Wire
25/Pack
50/Pack
100/Pack
45747
45760
45780
45747
45760
45780
(2 Piece)
45504 w/die 45504 w/die
45566
45566
45575
45575
45553
45575
45553
45575
45553
45575
45553
45575
45575
45575
45553
45575
45553
45575
45579
45553
45575
45553
45575
45579
45579
45553
45575
45553
45575
45579
45579
45553
45575
45553
45575
45541
45541
45504 w/die 45504 w/die
45504 w/die 45504 w/die
45566
45566
45541
45541
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
265
= new product
CANADA
25/Pack
50/Pack
100/Pack
USA
Flat Cable
Stranded Wire
Tel: 800.435.0786
Fax: 800.524.2853
Handset 4 Contact
Tel: 800.435.0786
Fax: 800.451.2632
Communications
connector type cable type
MADE FOR THE TRADE!™
CrimpALL® 8000 Series Crimpers
Communications
• Ultra-smooth, fully ratcheting crimp cycle with built-in safety release.
• Interchangeable die sets of heat-treated steel for long life.
• Soft, rubber-embedded handles.
• Long-lasting tool that delivers over 50,000 crimp cycles.
• Rugged, double-plated jaw design to increase life span.
• Lifetime warranty on tool; one-year on die sets.
• Angled head to prevent awkward wrist bending during operation.
• Reduced handle grip distance makes it easy for both small and large hands.
• Higher crimp force produced with less hand force so hand doesn’t
tire as quickly.
• No breakover hand force – the effort required by most crimpers to make the
last click at the end of the cycle to complete the crimp – the CrimpALL
does the work.
• Manufactured using the newest fine blanking technologies.
• EZI-Change™ die screws make changing dies quick and easy – no screwdriver
required.
Cat. No.
Description
PA8000
PA2303
PA2306
CrimpALL® tool frame
Replacement EZI-Change™ die screws (2)
Replacement fixed die screws (2)
SPECIFICATIONS
Weight
Length
CrimpALL® tool frame
die set
21 oz. (600 g)
9.84" (250 mm)
2 oz. (57 g)
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
1300 Series Crimpers
266
• Fully-ratcheting cycle with built-in safety release.
• Interchangeable die sets of heat-treated steel for long life.
• Easy to use and maintain.
• Available as complete tool with die set inserted or separate tool frame and
individual die sets.
• Foam-lined case available to hold frame and 6 die sets together.
• Lifetime warranty on tool; one-year on die sets.
• EZI-Change™ die screws make changing dies quick and easy –
no screwdriver required.
• Most precise and tightest tolerances on die sets in the industry.
• Six ratchet gear settings for optimum crimp performance.
Cat. No.
Description
PA1302
PA2303
PA2306
PA901013
Crimp tool frame
Replacement EZI-Change™ die screws (2)
Replacement fixed die screws (2)
1300 crimp case
SPECIFICATIONS
Weight
Length
CrimpALL® tool frame
die set
10.4 oz. (296 g)
8.9" (255 mm)
2 oz. (57 g)
www.greenlee.com
CrimpALL® Interchangeable Die Sets for Coaxial Connectors
description
CAT. no.
CAT. no..
TOOL
cable type connection
CRIMP SIZES with die die only
manufacturerS
or remarks
HDTV SMA, True 75-ohm
BNC/TNC, Mini-UHF
0.255" (6.5mm), 0.197" (5.0mm), 0.178"
(4.5mm), 0.068" (1.7mm) HEX & 0.042"
(1.0mm) SQ
PA8002
PA1366
PA2648
Common 2-piece and
3-piece BNC/TNC (Kings,
ADC, Amphenol, etc.)
RG59, RG6, Belden 8281,
Belden 1694A
HDTV BNC/TNC/CATV "f"
True 75-ohm
0.324" (8.2mm), 0.255" (6.5mm), 0.068"
(1.7mm) HEX & 0.052" (1.3mm), 0.042"
(1.0mm) SQ
PA8003
PA1367
PA2649
Common 2-piece and
3-piece BNC/TNC (Kings,
ADC, Amphenol, etc.)
RG6, Belden 1694,
Bleden 1694A
HDTV BNC/TNC True 75-ohm
0.278" (7.0mm), 0.275" (6.9mm), 0.068"
(1.7mm) HEX & 0.042" (1.0mm) SQ
PA8004
PA1368
PA2657
Common 3-piece BNC/TNC
(Kings & ADC HDTV)
RG58, Mini-59, RG-174,
small coaxial
SMA, SMB, Mini-59 BNC/TNC,
Mini-UHF
0.128" (3.2mm), 0.213" (5.4mm), 0.197"
(5.0mm), 0.178" (4.5mm), 0.068" (1.7mm)
HEX & 0.042" (1.0mm ) SQ
PA8005
PA1363
PA2653
Common 2-piece and
3-piece SMA/SMB/BNC/TNC
& Mini-UHF
RG58, RG174, AT&T 735, 50
and 75-ohm
Thinnet, BNC/TNC, Mini-UHF
0.213" (5.4mm), 0.178" (4.5mm) 0.068"
(1.7mm) HEX & 0.042" (1.0mm) SQ
PA8006
PA1335
PA2046
50/75 ohm small 2-piece
& 3-piece BNC/TNC (Kings,
ADC, etc.)
RG59, RG62, Belden 8281,
50 and 75-ohm
BNC/TNC and Mini-UHF
0.315" (8.0mm), 0.252" (6.4mm), 0.068"
(1.7mm), HEX 0.042" (1.0mm) SQ
PA8007
PA1336
PA2047
75 ohm 2-piece & 3-piece
BNC/TNC (Kings, ADC,
Amphenol, etc.)
RG174, RG179 and
Small Cable Connection
BNC/TNC
0.178" (4.5mm), 0.128" (3.2mm), 0.068"
(1.7mm) HEX
PA8008
PA1338
PA2051
Common 2-piece and
3-piece BNC/TNC/SMA/SMB
RG58, RG59, RG62AU,
RG6 Teflon/Plenum
BNC/TNC
0.325" (8.2mm), 0.215" (5.46mm), 0.065"
(1.7mm) HEX
PA8009
PA1347
PA2075
2-piece and 3-piece BNC/
TNC AIM/Cambridge
RG6, RG58
BNC/TNC
0.320" (8.13mm), 0.210" (5.33mm),
0.185" (4.7mm) HEX
PA8010
PA1348
PA2076
2-piece BNC/TNC AIM/
Cambridge, Kings, Amphenol
Belden 1694A, Belen 1695A
BNC/TNC
0.315" (8.0mm), 0.68" (1.7mm) HEX
PA8011
PA1349
PA2082
Common 2-piece and
3-piece BNC/TNC
RG6 and RG6 Quad,
Belden 1694A
BNC and CATV "F" Type
& HDTV
0.360" (9.1mm), 0.324" (8.2mm), 0.068"
(1.7mm) HEX
PA8012
PA1356
PA2045
Common 2-piece and
3-piece BNC/TNC and CATV
"F" 2-piece
RG59, RG6 Video Cable
CATV "F" Type
0.346" (8.8mm)m 0.319" (8.2mm), 0.256"
(6.5mm) HEX
PA8013
PA1328
PA2042
Crimps Ferrules or Sleeves
Only
RG8, RG11, RG213
N-Type
0.429" (10.9mm), 0.100" (2.54mm),
0.080" (2.03mm) HEX
PA8014
PA1365
PA2656
Common 2-piece and
3-piece "N"-Type (Kings,
ADC, Amphenol, etc.)
RG8, RG11, RG213, RG216
N-Type, MS39012 Type
0.415" (10.5mm), 0.095" (2.4mm) HEX
PA8015
PA1319
PA2039
Crimps Pins and Ferrules
RG8, RG213
BNC/TNC
0.402" (10.2mm), 0.094" (2.4mm), 0.079"
(2.0mm) HEX
PA8016
PA1337
PA2050
Common 2-piece and
3-piece BNC/TNC
Belden 1855A, 1865A,
1505A, 1505F, 1694A,
1694F, 179DT
HDYV BNC/TNC True 75-ohm
0.178" (4.5mm), 0.255" (6.5mm), 0.278"
(7.0mm), 0.068" (1.7mm), 0.041" (1.0) HEX
PA8049
PA1389
PA2699
Kings, ADC, B&L, Trompeter,
Amphenol, Switchcraft
267
= new product
= Replacement Part
= Accessory
INTERNATIONAL
RG174, RG59/62,
mini-coaxial 75-ohm
CANADA
Common 2-piece and
3-piece BNC/TNC
USA
PA2034
Tel: +1.815.397.7070
Fax: +1.815.397.9247
PA8001
PA1317
Tel: 800.435.0786
Fax: 800.524.2853
0.256" (6.5mm, 0.213" (5.4mm),
0.068" (1.7mm) HEX
Tel: 800.435.0786
Fax: 800.451.2632
BNC/TNC and 3 Piece
Communications
RG58, RG59, RG62AU
MADE FOR THE TRADE!™
CrimpALL® Interchangeable Die Sets for Modular Plugs
description
CAT. no.
CAT. no..
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Communications
TOOL
cable type connection
CRIMP SIZES with die die only
268
manufacturerS
or remarks
RJ45 - 8P8C (8 Pin)
Flat/Round, Solid/Stranded
RJ45 Unkeyed WE and SS
PA8030
PA1307
PA2061
Western Electric (WE)/
Stewart Connector (SS)
RJ11 & RJ12 - 6P6C, 6P4C,
6P2C
Flat/Round, Solid/Stranded
RJ11 & RJ12 Unkeyed WE and SS
PA8031
PA1340
PA2062
Western Electric (WE)/
Stewart Connector (SS)
RJ22 Handset - 4P4C (4 Pin)
Flat/Round, Solid/Stranded
4 Pin Handset WE and SS
PA8032
PA2063
Western Electric (WE)/
Stewart Connector (SS)
RJ45 - 8P8C (8 Pin)
Flat/Round, Solid/Stranded
RJ45 Unkeyed AMP
PA8033
PA1342
PA2064
AMP (Tyco) Inc.
Connectors Only
RJ11 & RJ12 (6P6C, 6P4C,
6P2C
Flat/Round, Solid/Stranded
RJ11 & RJ12 Unkeyed AMP
PA8034
PA2065
AMP (Tyco) Inc.
Connectors Only
RJ11 DEC-MMJ OFFSET6P6C
Flat/Round, Solid/Stranded
RJ11 DEC/MMJ OFFSET
PA8035
PA1344
PA2067
AMP (Tyco) Inc.
Connectors Only
RJ50 - 10P10C (10 Pin)
Flat/Round, Solid/Stranded
RJ50 Unkeyed WE and SS
PA8036
PA1345
PA2068
Virginia Plastics (VP)
British Telecom 6 Pole Plug
Flat/Round, Solid/Stranded
BT 6 Pole
PA2032
British Telecom Plugs
Only
RJ45, Stewart Connector
Short Body
Rounded, Shielded (STP)
RJ45, STP Stewart Connector,
Short Body
PA2670
Stewart Connector
RJ45, Hirose Connectors,
Long Body
Rounded, Shielded (STP)
RJ45 STP Hirose Connector,
Long Body
PA8041
PA2671
Hirose
RJ45, Hirose Connectors,
Short Body
Rounded, Shielded (STP)
RJ45 STP Hirose Connectors,
Short Body
PA8042
PA2672
Hirose
RJ45, Molex Connectors for
5.0 dia. Cable
5.0mm Dia. Round, Shielded (STP)
RJ45 STP Molex Connectors,
5.0mm dia. cable
PA1373
PA2673
Molex
RJ45, AMP/Molex
Connectors for dia. Cable
6.0mm Dia. Round, Shielded (STP)
RJ45 STP AMP & Molex,
6.0mm dia. cable
PA8044
PA2674
AMP (Tyco) Inc. & Molex
CrimpALL® Interchangeable Die Sets for Specialty Crimpers
description
CAT. no.
CAT. no..
TOOL
cable type connection
CRIMP SIZES with die die only
RJ45 WE/SS &
RG6/RG6 Quad CATV "F"
UTP 4-Pair & RG6/RG6 Quad
RJ45 WE/SS 8-pin &
0.360" (9.1mm) HEX/0.324"
(8.2mm) HEX
PA8045
PA1387
PA2687
manufacturerS
or remarks
For standard RJ45 WE/
SS Modular Plugs &
1-piece RG6/RG6 Quad
CATV "F" conns.
www.greenlee.com
CrimpALL® Interchangeable Die Sets for Insulated Terminal Crimpers
description
CAT. no.
CAT. no..
TOOL
cable type connection
CRIMP SIZES with die die only
Solid or Stranded Wire,
22-10 AWG (.34 - 6 mm2)
12-10 (Yellow), 16-14 (Blue), 22-18
(Red), (6-4 / 2.5 - 1.5 / .34 - .75 mm2)
PA8021
PA1305
PA2035
Insulated Terminals
and Lugs
Solid or Stranded Wire,
22-12 AWG (.34 - 4 mm2)
12-10 (Yellow), 16-14 (Blue), 22-18
(Red), (4/1.5 - 2.5 / .34 - .75 mm2)
PA8022
PA1308
PA2040
Insulated Terminals
and Lugs
Solid or Stranded Wire,
26-14 AWG (.10 - 2.5 mm2)
16-14 (Blue), 22-18 (Red), 22-26
(Yellow) (1.5 - 2.5 / .34 - .75 / .34 .10 mm2)
PA8023
PA1334
PA2029
For Smaller Wire Barrel
Terminals
CrimpALL® Interchangeable Die Sets for Non-Insulated Terminal Crimpers
description
CAT. no.
CAT. no..
TOOL
cable type connection
CRIMP SIZES with die die only
Non-Insulated Terminals
and Lugs
Solid or Stranded Wire,
22-8 AWG (.34 - .10 mm2)
10-8 / 14-12 / 18-16 / 22-20
(6 - 10 / 2.5 - 4 / .75 - 1.5 / .34 - .50
mm2)
PA8024
PA1322
PA2031
Communications
Insulated Terminals
and Lugs
manufacturerS
or remarks
For Large Professional
Terminals (Panduit,
T & B, etc.)
For Standard
Commercial Terminals
(Hardware Store Brands)
manufacturerS
or remarks
For Standard
Commercial Terminals
CrimpALL® Interchangeable Die Sets for Open Barrel, Box and Terminal Systems
CAT. no.
CAT. no..
Insulated & Non-Insulated
Wire Ferruls
Solid or Stranded Wire,
22-10 AWG (.34 - 6 mm2)
22-20 / 18-16 / 14-12 / 10
(.34 - .55 / .75 - 1.5 / 2.5 - 4 / 6
mm2)
PA8025
PA1360
PA2095
manufacturerS
or remarks
For DIN or US Type
Wire Ferrules
269
= new product
= Replacement Part
= Accessory
INTERNATIONAL
CAT. no..
CANADA
CAT. no.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
description
TOOL
cable type connection
CRIMP SIZES with die die only
Tel: 800.435.0786
Fax: 800.524.2853
CrimpALL® Interchangeable Die Sets for Wire Ferrules
Tel: 800.435.0786
Fax: 800.451.2632
TOOL
manufacturerS
cable type connection
CRIMP SIZES with die die only
or remarks
22-18 / 16-14 / 12-10
Open Barrel Non-Insulated
Solid or Stranded Wire,
PA8026
For Standard
(.34 - .75 / 1.5 - 2.5 /
Terminals, Narrow Lugs and
PA2033
22-10 AWG (.34 - 6 mm2), F Type*
PA1306
Commercial Terminals
2
4-6 mm )
Power Contacts
Open Barrel Non-Insulated
Solid or Stranded Wire,
16-14 / 22-18
For Standard
Terminals, Wide Lugs and
22-14 AWG (.34 - 2.5 mm2), F
PA8027
PA2096
(1.5 - 2.5 / .34 - .75 mm2)
Commercial Terminals
Power Contacts
Type*
Solid or Stranded Wire,
28-24 / 22-20
Open Barrel D-Sub Contact
PA8029
For Standard D-sub Pins
28-20 AWG (.08 - .50 mm2), F
PA2097
(.08 - .2 / .34 - .5 mm2)
Pins RS-232
PA1359
Only; not for HD D-subs
Type*
USA
description
MADE FOR THE TRADE!™
1600 Series Crimpers
Communications
• Precision-calibrated crimp profiles.
• Finest-quality tool steel.
• Long-lasting tool that delivers over 75,000 crimp cycles.
• Ultra-smooth, advanced ratcheting system with built-in safety release.
• Rugged, double-plated jaw design for increased life span.
• Smallest grip hand tool on the market with the longest life span available.
• Lowest hand-force of the long-life crimp tools on the market without
compromising superior crimp force.
• True ergonomic rubber handles that are soft and won’t quickly
wear out or break.
• No breakover hand force – the effort required by most crimpers to make
the last click at the end of the cycle to complete the crimp –
the tool does the work.
• Interchangeable die sets.
• Fiber optic die sets manufactured using secondary precision 3-D CNC grinding
process to ensure +/- .002 tolerances for crimping profiles.
Cat. No.
Description
PA1600
PA2307
Crimp tool frame
Thumb screws (1 set)
SPECIFICATIONS
Weight
Length
19 oz. (538 g)
8" (203.2 mm)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
description
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
1600 Series Interchangeable Die Sets for Coaxial Connectors
270
CAT. no.
CAT. no..
TOOL
cable type connection
CRIMP SIZES with die die only
Belden 8281 & 7505
BNC/TNC and 3 Piece HDTV
0.324" (8.2mm, 0.068" (1.7mm) HEX &
0.042" (1.0mm) SQ
RG59, Belden 1505A,
Belden 8241
BNC/TNC and 3 Piece HDTV
0.255" (6.5mm), 0.068" (1.7mm) HEX &
0.042" (1.0mm) SQ
RG6, Belden 1694A,
Belden 1855A
BNC/TNC and 3 Piece HDTV
0.275" (6.9mm), 0.178" (4.5mm) HEX &
0.042" (1.0mm) SQ
Belden 1694A, NT735,
Belden 8218
BNC/TNC and 3 Piece HDTV
0.278" (7.0mm), 0.197" (5.0mm) HEX &
0.042" (1.0mm) SQ
RG174/RG179/RG188 and
Small Cable Connectors
BNC/TNC
0.178" (4.5mm), 0.068" (1.7mm) HEX &
0.042" (1.0mm) SQ
RG58, RG59, RG62AU
BNC/TNC
0.255" (6.5mm), 0.213" (5.4mm),
0.068" (1.7mm) HEX
RG59, RG62AU,
Belden 8281/8241
BNC/TNC
0.324" (8.2mm), 0.255" (6.5mm),
0.068" (1.7mm) HEX
Belden 1855A, 1865A,
1505A, 1505F, 1694A,
1694F, 179DT
BNC/TNC and 3 Piece HDTV
0.255" (6.5mm), 0.278" (7.0mm),
0.178" (4.5mm), 0.041" (1.0mm) HEX
manufacturerS
or remarks
PA2660
Kings, ADC,
Amphenol HDTV
PA1611
PA2661
Kings, ADC,
Trompeter, Amphenol
HDTV
PA1612
PA2662
Kings HDTV
PA2663
ADC HDTV
PA1616
PA2003
Crimps Pins, Ferrules
& Sleeve
PA1617
PA2005
Crimps Pins, Ferrules
& Sleeve
PA2019
Crimps Pins, Ferrules
& Sleeve
PA2683
Kings, ADC, B&L,
Trompeter, Amphenol,
Switchcraft
PA1669
www.greenlee.com
1600 Series Interchangeable Die Sets for Insulated Terminal Crimpers
description
CAT. no.
CAT. no..
TOOL
cable type connection
CRIMP SIZES with die die only
Insulated Terminals
and Lugs
Solid or Stranded Wire,
22-14 AWG (.34 - 2.5 mm2)
16-14 (Blue), 22-18 (Red) Terminal Elliptical
(1.5 - 2.5 / .34 - .75 mm2)
PA1605*
N/A
manufacturerS
or remarks
For Standard
Commercial Terminals
description
CAT. no.
CAT. no..
TOOL
cable type connection
CRIMP SIZES with die die only
Non-Insulated Terminals
and Lugs
Solid or Stranded Wire,
20-10 AWG (.5 - 6 mm2)
12-10 / 16-14 / 20-18 Indent
(4 - 6 / 1.5 -2.5 / .5 - .75 mm2)
PA1618*
N/A
manufacturerS
or remarks
For Standard
Commercial Terminals
Communications
1600 Series Interchangeable Die Sets for Non-Insulated Terminal Crimpers
1600 Series Interchangeable Die Sets for Open Barrel and Terminal Systems
description
CAT. no.
CAT. no..
TOOL
cable type connection
CRIMP SIZES with die die only
manufacturerS
or remarks
N/A
Molex/Waldom/Leoco
Type Conn.
Open Barrel Contact Pins
Solid or Stranded Wire,
30-18 AWG (.05 - .75 mm2)
30-24 / 22-18 F-Type
(.05 - .20 / .34 - .75 mm2)
PA1645*
N/A
Molex/Waldom/Leoco
Type Conn.
Open Barrel D-Submissions
Solid or Stranded Wire,
28-20 AWG (.08 - .5 mm2)
28-24 / 22-20 F-Type
(.08 - .2 / .34 - .5 mm2)
PA1646*
N/A
Standard D-sub
Contacts
Open Barrel EDAC Contacts
Solid or Stranded Wire,
28-18 AWG (.08 - .75 mm2)
28-24 / 22-18
(.08 - .2 / .34 - .75 mm2)
PA1670
N/A
EDAC/ELCO Rack &
Panel Contacts
CAT. no.
CAT. no..
1600 Series Interchangeable Die Sets for Wire Ferrules
description
Insulated & Non-Insulated
Wire Ferruls
Solid or Stranded Wire,
20-10 AWG (.5 - 6 mm2)
20-10 Trapezoid
(.50 - 6 mm2)
PA1647
PA2681
For DIN or US Type
Wire Ferrules
Insulated & Non-Insulated
Wire Ferruls
Solid or Stranded Wire,
20-12 AWG (.5 - 4 mm2)
20-12 Trapezoid
(.50 - 4 mm2)
PA1648*
N/A
For DIN or US Type
Wire Ferrules
*The die sets for these tools are NOT removable or interchangeable. Removal of the die sets will void the warranty and cause the tool to lose calibration.
271
= new product
= Replacement Part
= Accessory
INTERNATIONAL
manufacturerS
or remarks
Tel: +1.815.397.7070
Fax: +1.815.397.9247
TOOL
cable type connection
CRIMP SIZES with die die only
CANADA
PA1631*
USA
24-22 / 18-14 F-Type
(.20 - .34 / .75 - 2.5 mm2)
Tel: 800.435.0786
Fax: 800.524.2853
Solid or Stranded Wire,
24-14 AWG (.20 - 2.5 mm2)
Tel: 800.435.0786
Fax: 800.451.2632
Open Barrel Contact Pins
MADE FOR THE TRADE!™
INTERNATIONAL
CANADA
• Intelligent Crimping System Technology includes a pressure sensor that monitors the
crimping force of each crimp and provides the operator a visual and audible alert if the
force is below specifications.
• State of the art 18V lithium ion (Li-ion) battery provides 70% more cycles per charge and
faster cycle times.
• LED light provides the operator with the battery charge and tool maintenance status.
• In line tool style is light weight and very easy to control
• One trigger controls all tool functions.
• Crimping head rotates 350°
• Tools automatically retract when the crimping or cutting cycle is complete
• Overmolded tacky grip areas make gripping the tool easier and more comfortable.
• LED work light illuminates dark work areas.
• Greenlee battery-powered crimping tools now use bio-degradable oil.
• Smart chargers control the charging current, charging voltage and battery temperature
to maximize battery life
• Uses all Kwik Cycle 9 crimping dies.
• Available with 120V, 12V or 230V battery charger or with 120V or 230V corded adapter
in place of batteries and charger
SPECIFICATIONS
Capacity
Length
Weight
Battery
Crimping Force
Width
Crimp Cycle Time
Battery Charge Time
Est. Cycles per Charge
Uses Kwik Cycle 9 Die Sets
12-3/4" (324 mm)
3-1/2 lb. (1.6 kg)
18V 1.5 Ah Li-ion
2,900 lb. (13kN)
2-7/8" (73 mm)
~2 seconds
30 minutes
400
272
Cat. No.
UPC No.
Description
EK210L11
EK210L12
EK210L22
EK210L120
EK210L230
52177
25752
52178
52179
52180
52079
52080
52081
52082
52083
52177
25752
52178
52179
52180
1.5-Ton Battery-Powered Crimping Tool w/120 volt charger
1.5-Ton Battery-Powered Crimping Tool w/12 volt charger
1.5-Ton Battery-Powered Crimping Tool w/230 volt charger
1.5-Ton Crimping Tool w/120V AC Adapter
1.5-Ton Crimping Tool w/230V AC Adapter
18V 1.5 Ah Li-ion
Carrying Case
120V Charger
12V Charger
230V Charger
Kwik Cycle® 9" Crimp Frame
• Used to manually crimp a wide variety of connectors
and terminals to factory specifications.
• Frame features a precision full-cycle ratchet for accurate,
repeatable crimps every cycle.
• Crimp release lever improves throughput by eliminating rejected
terminations due to improper connector positioning.
• Frame features a tension adjustment preset at the factory
for optimum performance.
• High-leverage force and ergonomically-designed handle provides
comfortable use.
• Frame and dies are manufactured from heat-treated, hardened tool steel
for superior function and long life.
• All die sets are easily interchangeable with a simple screwdriver.
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Communications
Gator® Terminal Crimping Tool
45504
See our comprehensive line of connectors on pages 249-252.
Cat. No.
UPC No.
Description
45504
45504
Kwik Cycle 9" Crimp Frame
www.greenlee.com
Kwik Cycle® 9" Interchangeable Die Sets for Coaxial Connectors
crimp Profile cat. upc cat upc
description
& dimensions no. no. no. no.
0.315 0.068
RG22B/U Twinax & others Twinax
45574 45574
0.429 0.075 0.075
46826 46826
RG58/RG174/8218
BNC/TNC 50 and
75 OHM
0.213 0.178 0.068 0.042
BNC/TNC & F, 50 and 45545 45545 46830 46830
RG6/RG59 & 8281
75 OHM. Also 1695,
1505, 9259 and 9231
0.324 0.255 0.068 0.042
46800 46800 46824 46824
RG58/RG59/62AU
BNC/TNC
0.256 0.213 0.068
RG59, RG6
CATV F
Communications
Center TOOL
cable type connection
braid crimp contact with die die only
45562 45562
RG58/RG59/
BNC/TNC Cambridge/
Rg59TFE/RG6
AIM, 2-piece
0.320 0.210 0.185
45563 45563
Belden 1694A
BNC/TNC
46801 46801 46808 46808
= Accessory
INTERNATIONAL
= Replacement Part
CANADA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
273
= new product
USA
45559 45559
Tel: 800.435.0786
Fax: 800.524.2853
RG58/59/62 Teflon
BNC/TNC from
Cambridge/AIM
0.325 0.215 0.065
Tel: 800.435.0786
Fax: 800.451.2632
0.360 0.324 0.255
45556 45556
RG58, RG59 Plenum
BNC/TNC 50/75 OHM
& Non-Plenum Thinwire
0.213 0.190 0.068 0.042
45582 45582 45557 45557
RG6, RG174, 8281,
BNC/TNC/F
AT&T 728
0.324 0.178 0.068
45558 45558
RG58/141/142/58 Teflon/ BNC/TNC/F
58 Thinney/RG59 0.100
0.255 0.213 0.068 0.052
MADE FOR THE TRADE!™
Kwik Cycle® 9" Interchangeable Die Sets for Open Barrel Contacts System
description cat. no. upc no. cat. no. upc no.
connection features
22-10 AWG
(0.3 to 6 mm2)
tool with die die only
Open barrel, non-insulated terminals,
ring tongue, spade and slide-on style
45508
45508
Communications
Kwik Cycle® 9" Interchangeable Die Sets for Modular Plugs
description cat. no. upc no. cat. no. upc no.
connection features
tool with die die only
RJ11
2-, 4- and 6-position
Western Electric and Stewart style connectors
46116
46116
RJ45
8-position
AMP modular plug connectors
45540
45540
46117
46117
RJ11
4- and 6-position
AMP modular plug connectors
45541
45541
46118
46118
RJ45
10-position
Modular plug connectors
45571
45571
Hand set plug
4-position
45566
45566
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Kwik Cycle® 9" Interchangeable Die Sets for Insulated and Non-Insulated Terminals
274
description cat. no. upc no. cat. no. upc no.
connection features
22-10 AWG
22-10 AWG
26-16 AWG
22-8 AWG
Color coded nests for easy identification
Standard insulated terminals, ring tongue,
spade lug, slide on and butt splices
Color coded nests for easy identification
For fully insulated slide-on syle connectors
™
AMP Ultrafast style
tool with die die only
45500
45500
45509
45509
45501
45501
45570
45570
45565
45565
45507
45507
For mini insulated terminals with smaller wire
barrels. Ring tongue, spade, slide on and
butt splices
For non-insulated terminals and splices
45505
45505
www.greenlee.com
Heat Gun
• Electronic variable heat control ranging from 250-1100º F (120-590º C).
• Two speeds: high & low.
• Double insulation safeguards injury from possible electrical failure inside gun.
• Comfortable, lightweight design reduces operator fatigue.
• Three nozzles included: window nozzle, deflection nozzle and .47” (12 mm)
focusing nozzle.
• UL listed.
Description
PA1873
Heat gun
SPECIFICATIONS
Weight
Power reqs.
Current draw
Power cons.
Desoldering Tools
2 lbs. (0.9 Kg)
120VAC 60 Hz
7.5 amps max.
1200 watts max.
• Removes solder with simple push-button operation.
• Standard (regular & anti-static) replacement tips available.
• Repair kits come complete with replacement spring and suction rods.
• Durable metal frame.
Cat. No.
Description: Desoldering Tools
PA1700
PA2712
Desoldering tool (standard)
Standard replacement tip
Communications
Cat. No.
PA1828-1
Cable tie gun
Note: Leaves 1 mm tab of lock after cut is made.
Kwik Cycle® Cable Tie Guns
UPC No.
Description
45306
45300
45306
45300
Standard Cable Tie Gun
Heavy-Duty Cable Tie Gun
275
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Tension adjustment allows the user to adapt the tool to the size of the tie.
• Automatic cut-off eliminates sharp edges on ties.
CANADA
Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• For use with plastic cable ties up to 0.25” (6.35 mm) in width.
• Neatly fastens and cuts in one action.
• Adjustable tension for changing cable bundle pressure.
• Automatic cable tie cut off.
USA
Cable Tie Gun
MADE FOR THE TRADE!™
FIBER OPTIC TOOLS
Communications
ProGrip 5-in-1 Fiber Optic Stripper
• Precision ground stripping cavities for:
– 2.0 - 2.4 mm outer jacket
– 2.0 - 3.0 mm loose tube
– 2.8 - 3.0 mm outer jacket
– 900 µm buffer insulation
– 900/125 µm and 250/125 µm buffer/acrylate
• Factory calibrated.
• Dual-durometer grips for improved comfort and control
Cat. No.
Description
PA1171
ProGrip 5-in-1 Fiber Optic Stripper
ProGrip 3-in-1 Fiber Optic Stripper
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Precision ground stripping cavities for:
– 2.0 mm outer jacket
– 900 µm buffer insulation
– 250 µm buffer/acrylate
• Factory calibrated.
276
Cat. No.
Description
PA1177
ProGrip 3-in-1 Fiber Optic Stripper
Fiber Optic Buffer Stripper
• Easily removes the buffer from both 250 and 900 micron cables.
• Preset at the factory – no adjustments required.
• Cushioned-grip ergonomic handles for comfortable use.
• Will not scratch or nick glass or fiber.
• 1.0 mm diameter stripping hole strips most fiber jackets.
• Made in the USA.
Cat. No.
UPC No.
Description
45589
45589
Fiber Optic Buffer Stripper
Pro-Plus Wire Stripper
• Strips the outer jacket off fiber optic cable.
• Extra-long, curved and cushioned handles add comfort and reduce
hand fatigue.
• Lock tab protects cutting edges during storage.
• Made in the USA.
Cat. No.
UPC No.
Description
1955
06857
Pro-Plus Wire Stripper, 10-18 AWG
www.greenlee.com
Economy Kevlar® Cutter
• Cut protective Kevlar strands in fiber optic cable.
• Hard-chromed serrated edges to easily cut through Kevlar.
• Comfortable handles with large finger openings.
Cat. No.
Description
PA1511
Economy Kevlar Cutter
Kevlar is a registered trademark of E.I. Dupont, Inc.
Weight
Length
2 oz. (57 g)
7.75" (197 mm)
Economy Fiber Optic Stripper
Communications
SPECIFICATIONS
• Pre-calibrated and factory set to ensure precision.
• Bright orange rubber dipped handles.
• Lock closure for safety and transport.
• Tool is for stripping 2.0-3.0 mm Fiber Optic cable, micron-cladded core.
Cat. No.
Description
PA1162
Economy Fiber Optic Stripper
3 oz. (86 g)
5" (127 mm)
Description
1903
07915
12679
07915
Pocket Cable Stripper
Cutting Blade (Pack of 2)
277
= new product
= Replacement Part
= Accessory
INTERNATIONAL
UPC No.
CANADA
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Specifically designed for stripping power and telecommunications
cables from 3/4" to 1-1/2" in diameter (19 mm to 40 mm).
• Strips solid conductor, stranded conductor and multiple
conductor cables.
• Easy blade depth adjustment.
• Blade rotates for circular, longitudinal and spiral cuts.
Tel: 800.435.0786
Fax: 800.524.2853
Pocket Cable Stripper
Tel: 800.435.0786
Fax: 800.451.2632
Weight
Length
USA
SPECIFICATIONS
MADE FOR THE TRADE!™
Fiber Optic Scribe
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Communications
• Pen-type scribe with screw-in non-reversible carbide tip.
• Wedge shaped tip.
• Pocket-clip.
• Stainless steel barrel.
278
Cat. No.
Description
PA1922-1
Fiber Optic Scribe
SPECIFICATIONS
Weight
Length
2 oz. (57 g)
5.25" (197 mm)
www.greenlee.com
Fiber Optic Polishing Pucks
• Manufactured from aluminum with tungsten coating.
• Cleaner than conventional plastic pucks because less debris left behind.
• Double the lifetime of conventional plastic pucks.
Description
PA1920-1
PA1926-1
SC, ST, FC Polishing Puck
LC Polishing Puck
SPECIFICATIONS
Weight
Length
2 oz. (57 g)
7.75" (197 mm)
Fiber Optic Co-Polymer Polishing Puck
• Used for standard ST, SC and FC connectors with 2.5 mm ferrules.
Cat. No.
UPC No.
Description
45598
45598
Fiber Optic Co-Polymer Polishing Puck
Communications
Cat. No.
UPC No.
Description
45599
45599
Fiber Optic Stainless Steel Polishing Puck
Tel: 800.435.0786
Fax: 800.524.2853
Fiber Optic Polishing Pad
UPC No.
Description
45612
45612
Fiber Optic Polishing Pad
279
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Resilient pad is perfect for PC (physical contact) pre-radiused ferrules.
• 3" x 8" (7.6 x 203.2 mm)
• 70 durometer.
CANADA
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Used for standard ST, SC and FC connectors with 2.5 mm ferrules.
• Made of stainless steel to last for years of termination.
• Precision hole prevents even the slightest misalignment.
• Grooves in the puck’s surface eliminate “sticking” during wet polishes.
USA
Fiber Optic Stainless Steel Polishing Puck
MADE FOR THE TRADE!™
Fiber Optic Inspection Microscope
Communications
• High-powered microscope is used to check a connector’s endface for
excess epoxy, core or cladding chips or other irregularities that degrade
optical performance of the connector.
• Laser safety filter protects eyesight.
• Rubber eyecup for comfortable use.
• Rugged aluminum housing.
• 200X magnification.
• Universal adapter works with ST, SC or FC connectors.
• Includes padded nylon carrying case.
Cat. No.
UPC No.
Description
45651
45651
Fiber Optic Inspection Microscope
Connector Cleaning Systems
• Special lint-free fabric-on-a-reel quickly cleans ferrule endfaces of dust,
oil and other contaminants.
• Cleaning system is completely self-contained.
• No need for alcohol.
• A single cleaning reel can be used for over 400 ferrule cleanings.
• ReelCleaner™ can be used on all connector types including MTP and MT-RJ.
Cat. No.
UPC No.
Description
948
948/2
945/ESD/1
60692
10792
24053
ReelCleaner™ Connector Cleaning System
Reel Set, 2/Package
Reel Set, 1/Package
• Specially-created, lint-free materials clean hard-to-reach fiber optic
interfaces, bulkhead adapters and ferrule alignment sleeves.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Adapter Cleaning Wands
280
Cat. No.
UPC No.
Description
946
946K
947
947K
60571
60689
60690
60691
2.5 mm Cleaning Wands, 10/Package
2.5 mm Cleaning Wands, 200/Box
1.25 mm Cleaning Wands, 10/Package
1.25 mm Cleaning Wands, 200/Box
Fiber Optic Consumables Kit
• Contains the most commonly used consumables for epoxy and polish
fiber optic terminations.
Cat. No.
UPC No.
Description
45656
45656
Fiber Optic Consumables Kit
www.greenlee.com
WIRE & CABLE IDENTIFICATION
Classic 77 Series Tone Generators
features / specifications
Selectable Warble Tone
Continuity Testing
77HP-G
77HP-G/6A
77M-G
✔
✔
✔
LED
LED & Beeper
✔
✔
✔
Talk Battery Supply
✔
✔
✔
Two-line Modular Test Lead (RJ-11)
✔
✔
Three-color LED (identifies AC ring voltage)
✔
✔
✔
Weather-Resistant Design
✔
✔
✔
Bent Nose Clips with Bed-of-Nails Penetrator
✔
RJ11 & RJ45 socket
✔
✔
Lanyard
✔
✔
Battery Operated (9V not included)
✔
✔
Communications
LED & Beeper
Polarity Testing
✔
77HP-G
77HP-G/6A
77M-G
Classic 77 Series Tone Generators
Permits technicians to identify the conductor within a bundle, at a
cross-connect point or at the remote end. Can be used on twisted pair wiring
(telecom, datacom, etc.), single conductors, coaxial cables, de-energized
AC wiring and most other wiring.
Cat. No.
UPC No.
Description
77HP-G
49991
77H-GP Tone Generator
77HP-G/6A
49992
77HP-G/6A Tone Generator (ABN clips)
77M-G
49993
77M-G Tone Generator (basic)
Note: Not for use on energized AC wiring
UPC No.
Description
77CS
08686 Leather Belt Holster for Classic 77 Series
Tone Generators
77HP-G
77CS
Cat. No.
UPC No.
Description
RPC
08710
Piercing Clips
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• These traditional telco-style clips can be used with almost any
style cordsets.
• Clips feature bent nose design for use on 66 style punchdown
blocks and bed-of-nails penetrator for use on insulated wires.
• Package of two clips with red and black boots.
281
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Replacement Piercing Clips
CANADA
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
MADE FOR THE TRADE!™
Professional GX Series Tone Generators
Communications
77GX
• Microprocessor controlled circuitry for increased reliability.
• Two-line polarity indication for fast outlet identification.
• Automatic shutoff to prevent battery drain.
• Snag-proof boot prevents broken plug tabs.
• Convenient wrist/hanging lanyard.
• Three distinct, selectable tone signal outputs for multiple
line identification.
• Two selectable tone power outputs for use on open and shorted pairs.
• Independent continuity test function.
• Independent talk battery supply with higher output voltage.
• Fixed alligator clips and removable modular plug for multiple
connection options.
• 77GX2 includes premium telco-style bent nose clips with piercing pin and
bed-of-nails connectors.
Cat. No.
UPC No.
Description
77GX
77GX2
60556
60560
77GX Tone Generator
77GX2 Tone Generator
Note: Not for use on energized AC wiring
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
AdapToner Modular Breakout Tone Generator
282
• The AT8 Tone Generator makes it simple to test continuity, polarity,
send tone and even supply talk battery to any configuration of
pairs in 8-position modular jacks and plugs.
• Combines the features of our tone generators and a modular
breakout adapter.
• In-line testing is made simple with both a modular plug and jack
on each unit.
• 8-position “snag-proof” modular plug.
• 8-position jack with protective cover.
• Quick reference guide with common wiring configurations.
• Selectable solid/warble tone signal.
• Tone, continuity and talk battery supply using alligator clips.
• Weather-resistant design.
• Battery operated (9V not included).
Cat. No.
UPC No.
Description
AT8
08693
AdapToner Modular Breakout Tone Generator
Note: Not for use on energized AC wiring
www.greenlee.com
LAN Toner with HUB Blink and Detect
• The LAN Toner is designed for the network installation and maintenance
professional and can be used on any wiring system including datacom,
telecom, security/alarm, audio and CATV.
• Blinks HUB, Switch Port, and PC activity lights for fast identification.
• Detect LAN hubs & switches.
• Provides tone signaling, continuity testing and telephone line polarity
indication combined with a modular breakout adapter.
• Selectable tone outputs for identifying multiple cable runs.
• Includes multiple connection options.
UPC No.
Description
AT8L
60583
LAN Toner
Note: Not for use on energized AC wiring
Communications
Cat. No.
Tone Test Set
UPC No.
Description
600LS
600CS
08680
08679
Tone Test Set
Leather Belt Holster for 600LS Test Set
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
283
= new product
CANADA
600CS
Tel: 800.435.0786
Fax: 800.524.2853
Note: Not for use on energized AC wiring
USA
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Our most comprehensive tone test set.
• Traditional alternating tone signal for wire identification.
• Audible line condition testing (level) indicates dead,
working and off-hook lines.
• Line 1 and 2 polarity testing using 4-conductor modular plug.
• Improved talk battery supply for communication over inactive pairs.
• Tone and test functions using either modular plug or 24" alligator
clip leads.
• Audible resistance level measurement.
• Audible capacitance level measurement.
• Battery operated (9V not included).
MADE FOR THE TRADE!™
Alarm Loop Verifier/Tone Generator
Communications
• Designed specifically for the security and alarm industry, the PE620 can
be connected to a Normally Open or Normally Closed loop pair
and provides a distinct audible tone when the alarm condition occurs.
• Latching feature provides a simple method for identifying intermittent
failures (“swingers”) and confirming operation of switches at
remote locations.
• In the latching mode, the unit will catch the alarm condition
and continue sounding until the tester is reset.
• As a tone generator, the unit provides a traditional variable tone that
can be applied using the 24" red and black test leads or a convenient
6-position modular plug.
• Convenient magnetic back plate allows the PE620 to be mounted
directly to the control panel cabinet or door.
• Battery operated (9V not included).
Cat. No.
UPC No.
Description
PE620
08665
Alarm Loop Verifier/Tone Generator
Note: Not for use on energized AC wiring
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Trace wire or cable without interfering with digital two-way cable
or ADSL services.
• The model 7780 Data Mate Precision Tone Generator is intended to
provide tone for tracing and troubleshooting communication circuits without
disrupting digital traffic on the line or adjacent lines.
• The high purity of the tracing tones combined with internal isolating filters
allows safe tracing on circuits that carry digital services above the baseband
(two-way cable and ADSL).
• The high-power differential output of the 7780 makes tones easy to find,
even over long distances. Also useful for continuity testing and polarity
testing, the 7780 provides the standard warble tone and talk battery supply.
284
• Two-way Broadband Compatible.
• Modular and Telco Pro Alligator
Leads.
• ADSL Service Compatible.
• Long Range.
• Popular, Standard Warble Tone
Frequencies Continuity Testing
• Compatible with existing tone.
• High Power Tone Output.
• Line Voltage and Polarity
Indication.
• High Purity Tone Signal.
• Low Crosstalk.
• Low Battery Indicator.
• Filter-isolated Circuitry.
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Data Mate® Precision Tracing Tone Generator
Cat. No.
UPC No.
Description
PE7780
60777
Data Mate Tone Generator
Note: Not for use on energized AC wiring
SPECIFICATIONS
Electrical
Output Power
Output Signal Frequency
Output Impedence
Mechanical
Length 5.5" (140 mm)
Width 2.25" (57 mm)
+9dBm
877/982 Hz alternating
3,500 ohms minimum, 25kHz to 1.1 MHz
Depth 1.0" (25 mm)
Weight 0.38 lbs. (0.17 kg)
www.greenlee.com
200 Series Tone Probes
model no.
200EP-G
200GX
200FP
200XP
✔
✔
✔
✔
✔
One-button Operation
✔
✔
✔
✔
✔
Adjustable Volume Control
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
LED Flashlight
✔
Noise Filtration
Replaceable Tip
✔
✔
✔
✔
✔
✔
✔
Five-Minute Auto Shutoff
✔
✔
Low-battery Indicator
✔
✔
Battery Operated (9V not included)
✔
✔
Patented
✔
✔
LED for Visual Signal Strength Indication
Recessed Tabs for Telephone Test or Headset Connection
Headset Jack (audio shock protected)
✔
200B-G
200EP-G
200GX
200FP
Communications
200B-G
Powerful 2" Rear-fire Speaker
200XP
Tone Probe Amplifiers
Tone Probe, Basic
Tone Probe, Standard
Tone Probe, Standard, with Headset Jack & Flashlight
Leather Belt Holster for 200 Series Tone Probe Amplifiers
285
= new product
= Replacement Part
= Accessory
INTERNATIONAL
49986
60557
49987
08670
CANADA
200B-G
200GX
200EP-G
200C
USA
Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
200EP-G
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
200C
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Used in conjunction with any tone generator, Tone Probe Amplifiers permit
wire and cable identification without having to make direct metallic
contact with the conductor.
• All models feature a powerful speaker for noisy environments,
recessed on/off button control and high gain for accurate wire
identification in congested cable bundles and equipment rooms.
• The 200B-G also includes adjustable volume control for precise
identification.
• The 200GX also includes an LED for visual signal strength indication and
recessed telephone test set connectors.
• The 200EP-G also includes a headset jack (audio shock protected) and an
LED Flashlight for working safely behind furniture, inside racks or in dim
lighting conditions.
MADE FOR THE TRADE!™
Filter Tone Probe
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Communications
• By selectively filtering out 60Hz (or 50Hz) and its harmonics, the 200FP
can be used with any tone generator for faster, more accurate,
cable and wire identification.
• Slim, comfortable design for use in limited-space areas.
• Recessed on/off push-button control to conserve battery life.
• Adjustable sensitivity/volume control to increase accuracy.
• Blended carbon/plastic tip to reduce the risk of shorting terminals.
• Patented.
286
Cat. No.
UPC No.
Description
200FP
200FP/50
08672
60467
Filter Tone Probe (60Hz mains)
Filter Tone Probe (50Hz mains)
Multi-Filter Tone Probe
• Single button selects between default mode and two kinds of
powerful noise filters.
• Filtering means faster, more accurate pair tracing.
• Digital signal processor for accuracy and sensitivity.
• Durable, light weight.
• Audible and visible signal detection.
• Continuous, wide-range volume control.
• Butt set terminals.
• Field replaceable tip, spare tip included.
• Uses a single 9 V battery.
• One probe for many applications.
• Works with any tone generator.
• The narrowband filter mode is especially well suited for 577Hz Telco tone
sources and a version is available for 1kHz systems (983Hz).
Cat. No.
UPC No.
Description
200XP
200XP/50
60887
60888
Multi-Filter Tone Probe (60Hz mains, 577Hz narrowband)
Multi-Filter Tone Probe (50Hz mains, 983Hz narrowband)
Replacement Plastic Tips for 200 Series Probes
• Plastic tips perform much the same as traditional metal tips while
reducing the risk of shorting terminals.
• Specially formulated with a carbon powder and carbon fiber
blended plastic.
• Tips fit 200B, 200EP, 200GX, 200FP and 200XP probes.
• RPT-1 comes with two pencil-style tips and two spade-style tips.
RPT-2
RPT-1
Cat. No.
UPC No.
Description
RPT-1
RPT-2
08711
60561
Plastic Tips for 200B, 200EP, 200FP and 200XP
Plastic Tips for 200GX
Replacement Metal Tips for 200B and 200EP Probes
• Metal tips provide maximum performance when probing
insulated wires or making direct metallic contact.
• Made of nickel-plated brass.
• Tips fit 200B and 200EP probes.
• Package contains two pencil-style tips.
Cat. No.
UPC No.
Description
RMT-1
08709
Metal Tips for 200B and 200EP Probes
www.greenlee.com
Classic Tone and Probe Kits
• 701K-G Kits include the 77HP-G High Power Tone Generator and the 200EP
Tone Probe Amplifier in a rugged, woven nylon carrying case (700C).
• 601K-G Kit is a more basic version of the 701K-G kit, and includes the
77M-G Tone Generator and the 200B-G Tone Probe amplifier in a zippered
nylon pouch.
UPC No.
Description
601K-G
701K-G
701K-G/6A
49989
49990
35775
Classic Tone and Probe Kit, Basic
Classic Tone and Probe Kit, Standard
Classic Tone and Probe Kit, Standard with ABN clips
Premium Tone and Probe Kit
• Designed for more accurate wire identification, the 801K virtually
eliminates power-related noise from the tone and probe operation.
• Kit includes the 77HP/6A High Power Tone Generator and 200 FP Filter
Probe in a convenient Cordura® case (700C).
Cat. No.
UPC No.
Description
801K
801K/50
08690
60466
Premium Tone and Probe Kit
Premium Tone and Probe Kit (50Hz)
Communications
701K-G
Cat. No.
Xpert Tone and Probe Kit
Description
811K
811K/6A-BOX
36001
26375
Tone and Probe Kit, Xpert
Tone and Probe Kit, Xpert with ABN clips
UPC No.
Description
AT8K
08694
AdapToner Kit
287
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Designed for fast, accurate wire identification by combining the features
of our tone generators and modular breakout adapter.
• Kit includes the AT8 Modular Breakout Tone Generator and 200EP
Inductive Amplifier in a convenient carrying case (700C).
Tel: 800.435.0786
Fax: 800.524.2853
AdapToner Kit
CANADA
UPC No.
USA
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• The Xpert Tone and Pobe Kit includes the 77GX (or 77GX2) Tone Generator
and 200XP Multi-Filter Tone Probe Amplifier in a rugged, woven nylong
carrying case.
• Especially suited for tracing in noisy environments.
MADE FOR THE TRADE!™
802K Digital LAN Tracing Kit
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Communications
• The 802K Digital LAN Tracing Kit is a powerful, unique troubleshooting
and tracing solution for LANs and other types of VDV wiring. The industry
standard 200FP filter probe (60Hz) is designed to eliminate hum from
fluorescent lights and AC power wiring that can obscure tracing tones.
• The AT8L LAN Toner not only generates multiple tracing tones
and provides basic wiring tests, but indicates the presence of
10/100Base-T network service.
288
Cat. No.
UPC No.
Description
802K
36000
Digital LAN Tracing Kit
LAN Toner Kit
• Designed for the network installation and maintenance professional,
the LAN Toner sends tone and blinks HUB, Switch Port, and PC activity
lights for fast identification. This kit can be used on any wiring system
including Datacom, Telecom, security/alarm, audio and CATV.
• Kit includes the AT8L LAN Toner and the 200GX Inductive Amplifier
in a rugged, woven nylon carrying case (700C).
Cat. No.
UPC No.
Description
AT8LK
60584
LAN Toner Kit
CATV Cable Tone Test Kit
• Designed specifically for the CATV industry, this kit allows you to tone through
splitters, directional couplers and traps.
• Simple to use, the 402K provides accurate results and will eliminate long
delays trying to figure out non-tagged or mis-tagged cable drops.
• Kit includes one transmitter, one receiver, one male F-to-F connector adapter
cable, one male F-to-alligator clip adapter cable and a carrying case (700C).
• Transmitter and receiver are equipped with female F-connectors.
• Three methods of signal reception: electrostatic pickup for non-terminated
cables, electromagnetic pickup for terminated or shorted cables and direct
connection when identifying in the presence of passive devices.
• In continuity mode, provides both audible tone and LED display.
• Identifies the presence of AC or DC voltage on the cable under test.
• Four selectable tone outputs for multiple line identification.
Cat. No.
UPC No.
Description
402K
402T
402R
CS9
CS19
08677
60376
60377
60374
60378
CATV Cable Tone Test Set
Transmitter
Receiver
Male to male F-connector adapter cable
F-connector to alligator clip
www.greenlee.com
Security and Alarm Kit
• Designed specifically for the security and alarm industry, the 620K
provides a simple method for identifying intermittent failures (swingers)
and confirming operation of switches at remote locations.
• To better satisfy industry requirements, we’ve combined the Model PE620
Tone Generator with the popular Model 200EP Inductive Amplifier
in a durable woven nylon pouch (700C).
UPC No.
Description
620K
08682
Security and Alarm Kit
Tone and Probe Plus Cable-Check™
Description
PA1573
Tone & Probe Plus Cable-Check Kit
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Replacement Part
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
289
= new product
USA
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
RJ45 LAN Tester
• True cable mapping function identifies:
– Good connection, opens, shorts and crosses.
– Connector and cable pin-out.
– Clear LED display for each pin and shield.
– Shielded RJ45 modular plug socket.
• Automatic display of mapping with dual speeds: slow or fast.
• Tests RJ11 and RJ45 cables with runs up to 600’.
• Check polarity of telephone line.
• View telephone line status: dial tone, ringing or busy line.
• Provides talk power for telephone lines and butt set use.
• Selectable dual/single tone application for balanced and
unbalanced circuits.
• Four tone generator patterns.
• Test continuity of wires, cables and loads.
• Tone generator features auto-off function.
• Jack for headset.
• Audible speaker with adjustable volume control.
Communications
Cat. No.
MADE FOR THE TRADE!™
Cabling Pouch
Communications
• Designed to hold a complete set of wiring tools including: any (one)
77 Series Tone Generator, any (one) 200 Series Inductive Amplifier,
a punchdown tool, a cabling knife and scissors.
• Convenient loop to hold most telephone test sets.
• Removable “parts pouch” allows you to keep small components
in reach.
• Made of a durable woven nylon.
• Fits belts up to 5" wide.
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
UPC No.
Description
750C
08685
Cabling Pouch
Tone and Probe Carrying Case
• Allows you to build your own kit using any tone generator
and 200 Series probe.
• Durable woven nylon.
• Fits belts up to 3" wide.
700C
290
Cat. No.
Cat. No.
UPC No.
Description
700C
711CS
08683
60559
Tone and Probe Carrying Case
Tone and Probe Carrying Case with belt hook
www.greenlee.com
STRUCTURED WIRING TESTERS
NETcat® Pro 2 NC-500
NC-500
Cat. No.
UPC No.
Description
NC-500
NC-510
23639
23640
NETcat Pro 2 Digital VDV Wiring Troubleshooter
NETcat Pro 2 Accessory Kit w/carry case
Communications
• Test and troubleshoot telephone, data and coax wiring.
• NETcat Pro 2 New Features:
– Gigabit device capability detection (still detects 10baseT and 100baseT too).
– Cable type, velocity of propagation library, user editable.
– Power over Ethernet (PoE) detection.
– Memo pad.
• Detect split pairs, short circuits, broken and crossed wires.
• Step TDR technology shows length to open or short of all pairs.
• Test shielded twisted-pair (STP), unshielded twisted-pair (UTP) & coaxial cables.
• Test patch cords and remote jacks.
• Touch-screen control, included stylus slots into main unit.
• Large icons ensure easy use with your finger too.
• Large 3" (76mm) backlit high-contrast (user adjustable) monochrome display is
highly visible in dark or brightly lit areas.
• Remote test and ID unit stores in base of main unit.
• Can identify up to 8 remote test ID units (7 extra available in NC-510 accessory
kit along with carrying case).
• Tone generator with four selectable precision frequency tones, compatible with
Greenlee advanced digital signal processing probes.
• Operates on single 9V battery with low battery indication.
SPECIFICATIONS
Dot Pixels: 128 x 128 dots
60.0 x 58.4
White LED
LCD touch-screen, Single
momentary contact push button
Environmental
358 ft (100 meters) maximum distance
291
= new product
= Replacement Part
= Accessory
INTERNATIONAL
2000 ft. (609.6 meters) maximum distance
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Interface
Connections
TDR
Calibration
TDR Range
Resolution
Accuracy to
Open/Short
Remote
Identifier
Wiremap
Operating
0°C to 50°C
Temperature
Storage
-20°C to 70°C
Temperature
RJ45 shielded jacks
F-type threaded female coaxial connectors
User selectable based on a known cable length.
40% to 100% in steps of 1%
0 to 2000 ft. 1 ft. (0.3 m)
±4% or 2 ft. (0.6 m) whichever is greater
CANADA
NC-510 NETcat Pro 2 Accessory Kit Contents:
• Seven additional remote jack test and ID units,
RJ45 and F (male)
• Carrying case to hold additional remote test ID units
and content of NC-500 main kit
Display LCD
Viewing Area
Backlight
Buttons
Tel: 800.435.0786
Fax: 800.524.2853
NC-500 Contents:
• NETcat Pro 2 main unit with stylus
• Removable remote jack and patch lead test and ID unit
• Twisted-pair (modular RJ45), coax (F) and alligator clip
test cords
• 9V alkaline battery
USA
NC-510
(NC-500 not included)
3.3" x 1.4" x 6.7" (8.5 cm x 3.5 cm x 17 cm)
0.45 lb. (200 g)
9V Alkaline battery (PP3)
Tel: 800.435.0786
Fax: 800.451.2632
Dimensions
Weight
Power
Requirements
User Interface
MADE FOR THE TRADE!™
Communications
NETcat® Micro NC-100
• Tests shielded twisted pair (STP), unshielded twisted pair (UTP) and coaxial cables.
• TIA/EIA standard wiring pair verification.
• Detects shorts, opens, reversed polarity, crossed and split pairs.
• Generates three distinct, selectable digital tone patterns for cable tracing
and troubleshooting.
• Tracing modes can be adjusted for high performance LAN cables.
• Complete set of connector types standard (telephone, LAN and coax).
• Nested remote allows end-to-end testing of all wiring types.
• Simple testing of LAN wiring and phone lines.
• Detection of common wiring and connector errors.
• Warning of hazardous voltages.
• Checks for reversed telephone wires.
Cat. No.
UPC No.
Description
NC-100
23636
NETcat® Micro Digital Voice Data and Video Wiring Tester
SPECIFICATIONS
Dimensions
Weight
Power Source
User Interface
150 x 70 x 33mm
220g including remote unit and battery
9V Alkaline battery (PP3)
Display LCD
Backlight
Buttons
Icon and seven segment type
Green LED
Four momentary contact push button
Environmental
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Interface
Connections
292
Operating
0°C to 50°C
Temperature
Storage
-10°C to 60°C
Temperature
Humidity
up to 95% non-condensing
RJ45 shielded socket
RJ12 6-way socket
F-type threaded female coaxial connectors
Network Split
Pair Detection
Pair Tracing
Tones
Minimum
2 to 3 meters (5 to 10 ft.) depending on cable type
cable length
Alternating frequencies of 577Hz and 983Hz are produced at three
user selectable rates. Designed for standard tone probes, but
compatible with precision digital Greenlee tone probes.
www.greenlee.com
LAN ProNavigator™ Tester & Remote
Remote
Cat. No.
Description
PA1543
LAN ProNavigator™ test set (main & remote),
2 RJ45 patch cords, 2 belt clips, 12 oz.(342 g)
LAN ProNavigator™ test set (main & remote),
2 RJ45 patch cords, 2 BNC coaxial cables,
2 CATV “F”-to-BNC adapters, 1 BNC/BNC adapter,
1 shielded RJ45 coupler, 2 belt clips in durable case
Adapter, CATV “F” (female) to BNC (male)
PA901066
PA901074
Communications
• Simple PASS/FAIL test results in one second allows technicians to quickly
move on to the next test site.
• Generates oscillating audio tone for use with tone probes to locate cables.
• Tests data and telephone cables up to 320 feet (100 meters) for proper
pairing for EIA/TIA-568A, EIA/TIA-568B, Token Ring, 10 Base T, and
common Category 5 configurations.
• Tests unshielded UTP and shielded STP data cable.
• Detects good connections, open connections, crossed wires and split pairs.
• Tests common BNC connected 50 and 75 ohm coaxial cables up to 320
feet (100 meters) for continuity.
• Tests coaxial cable types RG58, RG59, RG6, RG6 Quad, Belden 8281, RG8,
RG11 and more.
• Belt clips provided and lanyard holes embedded in case to attach
to belt or wrist.
• Features low battery test and auto-off function to preserve battery life.
• Includes standard 9V battery.
Main
NOTE: May not be compatible with CAT-6 flat or oval cable, or bonded cable.
PA901066
SPECIFICATIONS
MAIN
REMOTE
2 oz. (57 g)
3.45" x 1.6" x 0.9"
87 mm x 41 mm x 24 mm
KIT
2 oz. (1140 g)
8.5" x 7.6" x 3"
216 mm x 193 mm x 76 mm
Description
PM-400K
11877
PairMapper® Wiremap Kit
293
= new product
= Replacement Part
= Accessory
INTERNATIONAL
UPC No.
CANADA
PM-400K
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Use to identify various wiring faults found in 10 BASE-T and other
four-pair, twisted pair cables per TIA/EIA 568A and 568B.
• Tests and identifies up to four cables with unique Remote Terminators.
• Easy to use, compact.
• Checks twisted pair cable for shorts, opens, crossed pairs, reversed pairs
and split pairs.
• Battery operated (4 x AAA not included).
Tel: 800.435.0786
Fax: 800.524.2853
PairMapper® Wiremap Kit
USA
8 oz. (228 g)
5.25" x 6.75" x 2.25"
133 mm x 171 mm x 57 mm
Tel: 800.435.0786
Fax: 800.451.2632
Weight
Dimensions
MADE FOR THE TRADE!™
Sure Signal®
Communications
• Designed for cable installers and communications technicians for testing
four-pair data/voice cable links terminated with standard, modular
eight-position RJ45-style jacks.
• Simplest tester available for identifying common wiring faults such as shorts,
opens and miswires.
• Diagnosis can be completed at one end.
• Sequentially-lighting LEDs correspond to each wire allowing easier diagnosis
of miswires than testers that check pairs.
• Can test more wiring configurations than other testers due to sequential wiremap testing.
• Shielded test ports allow extra versatility to test shielded and screened twisted pair.
• Optional patch cords allow the Sure Signal to be used as a coax tester, eliminating
the need for a second tester.
• Optional remote unit can be used to check patch cords for wiring errors.
• Optional Accessory Kit includes two RJ45 patch cords, two RJ45 to BNC adapter
cords, two RJ45 to RJ11 snap-in adapters and one BNC plug to BNC plug adapter.
• Battery operated (9V not included).
46060
Cat. No.
UPC No.
Description
46060
46070
45276
46065
CSI0
46060
46070
45276
46065
60381
Sure Signal Line Verifier and Patch Cord Tester
Sure Signal Remote
Carrying Case
Sure Signal Accessory Kit
Modular Adapter cable
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Wiremap Tester
294
• Quickly identifies opens, shorts, reversals and transposed pairs.
• Economical tester includes all the basic functions.
• Connecting the receiver unit automatically activates the test process.
• Sequencing red and green LEDs provide fast, accurate
and simple-to-understand results.
• Alerts the technician if connected to an active circuit without harming the unit.
• Connect any eight-position modular plug to the appropriate jack on the
transmitter and a sweeping tone signal is applied to all pairs.
• At the far end of the cable, use any Tempo inductive amplifier (probe)
to locate the corresponding plug or jack.
• Battery operated (9V not included).
468
Cat. No.
UPC No.
Description
468
468C
468T
468R
CSI0
08661
60382
60379
60380
60381
Wiremap Tester
Carrying Case for the Wiremap Tester
Transmitter
Receiver
Modular Adapter Cable
Data/Link ID and Cable-Check™
• Cable mapping function tests data & phone connection schemes including
patch cords and installed cables.
• Identifies cross-over telephone connections.
• Detects PC (NIC) & HUB data transmissions and PC (NIC) & HUB NLP or FLP
link pulse.
• Identify data & link transmission speeds with real time detection: 100/10 MB.
• Automatically scans with choice of slow or fast speeds.
• Low battery detection on LAN ID tester.
• Includes 9V battery, 2 RJ45 patch cords and durable nylon carrying case
with belt loop.
Cat. No.
Description
PA1576
Data/Link ID and Cable-Check™
www.greenlee.com
LAN Cable-Check™
• Identifies cross-over telephone connections.
• Automatically scans when cables connected and unit turned on.
• Two scan speeds: fast or slow.
• Maps connector and cable pin-out.
• Tests cables up to 1,650’ or 500 m.
• Also tests RJ11 connections using an RJ11 adapter (not included).
• 2, RJ45 patch cords and 9V battery included.
• Contained in a durable nylon carrying case with belt loop.
Description
PA1574
LAN Cable-Check™ Tester
LAN and A/V Cable-Check™
Description
PA1594
LAN and A/V Cable-Check™
= Accessory
PA1577
PC Cable-Check® Pro
295
INTERNATIONAL
= Replacement Part
Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Quickly & easily troubleshoot cables to eliminate the cable as the source
of a problem.
• True cable mapping for over 20 different cable types: BNC coax & S-Video,
VGA, Firewire, USB & Mini-USB, PS/2, parallel printer, RS-232 serial and
Cat5e or Cat6 LAN.
• Supports these connectors: male and female DB9, DB15, DB25 and
HDB15; 36-pin Centronics printer; RJ11, RJ12, RJ45 shielded &
unshielded; BNC coax female; male and female mini-DIN6; female miniDIN4; USB-A and USB-B; mini-USB 5-pin; IEEE 1394 FireWire 4- and 6-pin
• Tests 50 ohm cables up to 1000’ (305 m) & 75 ohm cables up to
600’ (183 m).
• Easy to read and understand LED indicator lights.
• New rugged case with built-in handle for easy transport.
• Auto scan or manual scan modes.
• Rubber feet grip to desk or bench to prevent slipping.
• Auto-off after 30 seconds of non-use to extend battery life.
• 9V battery included.
CANADA
PC Cable-Check® PRO
USA
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
Network
• Tests RJ45 patch cords and network installations to identify good
connections, opens, shorts or cross-connections.
• Identifies data and telephone connection schemes.
• Maps cable pin-out.
Coax
• Tests continuity of cords and installed cable runs.
• Identifies good connections, opens and shorts.
Features and Benefits:
• Automatic scanning.
• User selectable slow or fast speeds.
• Quickly check cable installations and patch cords.
• Easy-to-use with clear LED read-outs.
Includes:
• 2 RJ45 patch cords
• 9V battery
• 75-ohm male terminator
• Durable, nylon carrying case
• Cable TV “F” female adapter •RCA to CATV "F" adapter.
Communications
Cat. No.
MADE FOR THE TRADE!™
Coaxial Cable Tester
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
296
Cat. No.
UPC No.
Description
45055
45055
Coaxial Cable Tester
CABLE & SERVICE TESTING
Nautilus Range Telephone Test Sets
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Communications
• Provides quick verification of opens or shorts in either the conductor
or the shield of coax cable.
• Simple one-button operation provides pass/fail indication.
• Remote terminator allows testing of cables before or after installation.
• Clear red/green LED indication of short or open conditions.
• Standard BNC- and F-type female connectors.
• Battery operated (9V included).
• Waterproof tested to an IEC IP67 rating, these test sets are so impervious
to water they can actually withstand submersion.
• The PE961 features our DigAlert™ over-voltage alarm and lock-out
function to eliminate the danger of damaging or knocking out digital
service lines.
• Built-in ADSL Filter.
• Ten-number speed dial memory (32 digits each).
• Last number redial.
• Precise hook flash.
• Microphone mute.
• Audible and visual mode indicators.
• Polarity test in any mode.
• Unique quick-release belt clip.
• Premium cord set with bed-of-nails and piercing pin clips.
• Luminescent Keymat.
PE961
Feature
Cat. No.
UPC No.
Description
PE930
PE945
PE961
PE901
PE902
60487
60489
60511
60492
60493
Telephone Test Set
Test Set with Two-Way Hands Free
Test Set with Two-Way Hands Free and DigAlert
Ground Start Cord Set
Cord Set
PE930
PE945
Monitor safe for data
✔
✔
PE961
✔
Adjustable Ringer
✔
✔
✔
Waterproof Design
✔
✔
✔
Loud Speaker Listening
✔
✔
✔
✔
✔
Two-Way Hands Free
DigAlert™ Data Lock-out
✔
ADSL Compatible
✔
✔
✔
www.greenlee.com
Tele-Mate® Telephone Test Sets
PE810
Description
PE810
PE830
PE909
60298
60299
60785
Tele-Mate® Telephone Test Set
Tele-Mate® Pro Telephone Test Set
Belt Clip
RPC
Replacement Piercing Clips (see page 248)
Feature
Monitor safe for data
PE810
✔
PE830
✔
Loud Speaker Listening
✔
DigAlert™ Data Lock-out
✔
297
= new product
= Replacement Part
= Accessory
INTERNATIONAL
✔
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Adjustable Ringer
CANADA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
USA
PE830
Tel: 800.435.0786
Fax: 800.451.2632
PE830
• The Tele-Mate Pro Telephone Test Set will help you deal with
the increasing complexity of telecom installation and maintenance.
• Complete telephone set with ringer.
• Phone-to-phone intercom with "SmartIntercom" alert feature.
• Modular or alligator clip connection.
• LCD Display in English, Spanish, German or French.
• Caller ID with name display.
• Call waiting Caller ID.
• Missed call indication.
• Line voltage and current display
• Ringing frequency display
• menu selectable ring tone, DTMF level, "flash" time,
pluse radio, and language.
• High voltage detect and lockout.
• High current detect and lockout.
• Amplified loudspeaker line monitor.
• Headset or handset operation.
• Tone and pulse dialing.
• Large 10-location speed dialing memory.
• Multi-memory redial; Last 5 numbers dialed or received are stored.
Communications
PE810
• Designed for communications wiring installation and repair to quickly
verify the quality of a new installation.
• Affordable.
• Headset for hands-free operation.
• Rugged design for demanding use.
• Compact design and durable belt clip make it easy to carry.
• Adjustable volume.
• Built-in ringer.
• Tone/Pulse dialing.
• Last number redial.
• Line polarity indication.
• Microphone mute.
• Monitor safe for data.
• Replaceable premium cord set with telco-style clips.
MADE FOR THE TRADE!™
Butt Set
Communications
• Phone line powered eliminates need for external power source.
• Provides DTMF (touch tone) and dial pulse output.
• Talk, ring and monitor modes.
• High impedance monitor does not interfere with data, conversation or
signaling.
• LED identifies polarity.
• Last number redial.
• Memory storage for 10 frequently dialed numbers.
• Field replaceable spring-loaded belt clip and line cord.
Cat. No.
Description
PA1780
PA1785
Butt Set
Cordset Accessory with Bed-of-nails Alligator Clips
4-6-8 Modular Adapters
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
CANADA
USA
Description
PA1902
PA1903
PA1904
RJ45 Modular Adapter (8-way)
RJ11 Modular Adapter (6-way)
RJ22 Modular Adapter (4-way)
• Use with tone generators, test sets and other test devices to troubleshoot
and isolate problems with telephone circuits.
• Two jacks allow in-line testing without service interruption.
• The TurTEL 6 has two six-position, six-wire jacks.
• The TurTEL 8 has two eight-position, eight-wire jacks.
• Simple, push button operation to check polarity and power.
• Reduced chance of shorting adjacent alligator clips due to unique shape.
• Test contacts are perforated to provide sure grip for alligator clips or use
of probes.
• The TurTEL 6 has an internal circuit to allow testing of polarity for either
of two lines (pairs 4 to 5 or 3 to 6) – circuit allows verification of power
and phone number assignments.
• Patch cord included.
• Heavy-duty stainless steel belt clip.
46040
46050
298
Cat. No.
TurTEL Modular Adapters/Polarity Tester
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Nylon-reinforced ABS plastic body.
• Easy-to-read wire layout.
• Removable/replaceable patch cord.
• Inline adapters.
• Snagless plugs.
• Belt clip.
• Notched copper contacts keep alligator clips attached during testing.
Cat. No.
UPC No.
Description
46040
46050
46040
46050
TurTEL 6 Modular Adapter/Polarity Tester
TurTEL 8 Modular Adapter
www.greenlee.com
ToneRanger
Cat. No.
UPC NO. Description
10101-50000
10101-51000
10101-51100
10101-51200
10101-51300
10101-51400
27345
02066
02028
27338
27321
20191
TF1A Kit, ToneRanger Aerial
TF1ABL Kit, ToneRanger Aerial and Buried
TF1AP Kit, ToneRanger Aerial with Pair ID
TF1AB Kit, ToneRanger Aerial with Buried Wand
TF1AL Kit, ToneRanger Aerial with Layup Stick
TF1ABLP Kit, ToneRanger with Aerial, Buried & Pair ID
Communications
• Direct buried fault location, it gives an exact location to the fault.
• Locates open shield and open bond faults.
• Locates twisted-pair resistance faults in aerial, underground, and direct
buried cable.
• Locates splits, opens and bridge taps.
• Uses low voltage and does not damage cable, circuit cards, C.O. or
subscriber equipment.
• Sends Pair ID tone through wet pulp and saves service outage time on
small count section throws.
• Locates open shields and shield to earth faults.
• Does not interfere with DSL, IPTV or digital services on adjacent lines.
• NEW easy user interface.
Throwmaster® Paragon
29019
Throwmaster® Paragon 519 Kit
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
299
= new product
CANADA
0529-0001
USA
UPC NO. Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Used by construction cable splicers all around the world.
• Transfer telephone/broadband services during normal working hours.
• Does not interrupt important customers.
• Simple to follow interface and process for successful transfer of circuits.
• LED's on the cords aid in telling the user in the cut, transfer and splice.
• Compatible with T-1, HDSL, HDSL-2, HDSL-4, ADSL and other services
less than 10Mb/s.
• Each step is automatically tested and verifies the circuit is complete at the
end of the transfer.
MADE FOR THE TRADE!™
Throwmaster® Cable Test Set
Communications
• Test non-working pairs for all DC defects including opens, shorts, crosses,
grounds, splits, balance and high resistance faults.
• Tests working pairs for busy status, polarity and voltage.
• Measures DC voltage from 0 to 100 volts.
• Measures resistance from 0 to 10 megohms.
• Locates opens, shorts, grounds, crosses and splits.
• Supplies talk battery and signaling functions for technician
communication.
• Sends simple 577 Hz tone for pair identification which is silent to
subscribers.
• Performs cut-closed cable transfers or section throws on working cables
without service interruption.
• Tests and transfers metallic and pairgain circuits without interruption.
Cat. No.
UPC NO. Description
0105-0001-5
0105-0023
16674
16681
Throwmaster® 105
Throwmaster® 105 Conversion (102A to 105)
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Throwmaster® Splicer's Test Set
300
• Performs conformance testing on twisted-pair cable.
• Rapidly tests 25 pair in 4 seconds.
• Tests modular splices when they are completed, identify splicing errors.
• Locate opens, shorts, grounds, crosses, and splits using either analog or
digital meters.
• Send simple 577 Hz tone for pair identification.
• Provides talk battery.
Cat. No.
UPC NO. Description
0108-0001
02035
Throwmaster® 108
www.greenlee.com
1155 Fault Loop Simulator
Cat. No.
UPC NO. Description
1155-7001
57691
Communications
• Simulates 8 fualts that can be used individually, or in a combination:
– Cross battery.
– Resistive 5 kohm load to ground.
– Resistive 500 ohm short.
– Two balanced bridge taps.
– 60 ohm series resistance fault.
– 60 Hz Power Influence.
– High frequency noise.
• 1910 foot cable length.
• Battery operated.
• Rugedized case.
• Convenient Test Lead connections.
• Three access locations in the span for custom faults.
• Train users on real twisted-pair faults.
• Test multiple test set functions such as RFL, TDR, Power Influence, Stress,
Leakage, Resistance, impulse noise and others.
• Verify results from the field in a controlled environment.
• Demonstrates how noise increases with pair imbalances.
• Show differences between shorts, bridge taps, series faults and opens
with a TDR.
Test Set
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Accessory
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
= Replacement Part
USA
Tel: 800.435.0786
Fax: 800.451.2632
301
= new product
MADE FOR THE TRADE!™
Communications
Sidekick® Plus Advanced Cable Maintenance Test Set
1155-5001
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Dimensions
Weight
Resistance
Leakage
DC Voltage
AC Voltage
Stress Balance
RFL
TDR Range
Operating Temp.
Power
11 x 4.75 x 3 inches
3 lbs.
100 megohm max
100 megohm max
0 to 300 Volts DC
0 to 250 Vrms
0 to 82 dBrnC
20 megohm, distance to 2 megohm
33 kilofeet
14°F to +120°F
Rechargeable Battery Pack or Six AA batteries
Cat. No.
UPC No.
Description
1155-5001
1155-5002
1155-5003
1155-5004
1155-5005
1155-5105
04346
05435
58799
58805
13048
57684
Sidekick Plus Kit
SK Plus, Impulse Noise, US
Sidekick Plus CE Kit, International
Sidekick Plus CE IMP Noise Kit, International
Kit, SK Plus with Impulse Noise & Step TDR
SK Plus Step TDR Upgrade
Sidekick® T&N
1137-5002
• Five transmission and noise tests.
• Determines the stressed noise susceptibility of dry and working pairs.
• Measures resistance, AC/DC volts, and capacitive kick.
• Provides tone for twisted pair or crossed conductor identification.
• Single setup for testing Tip-Ring, Tip-Ground, and Ring-Ground.
• Minimal drying effect in all ranges.
• Field replaceable leads.
• Softcase with adjustable strand hook.
• Low battery indicator light.
Cat. No.
UPC No.
Description
1137-5002
1134-1002S
1131-0202
60526
60752
60751
Sidekick T&N
Case
Test Leads
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
• Complete metering of voltage, current and resistance on copper cables.
• Patented stress balance test.
• Measurement of distance to opens.
• Line quality tests for noise, loss and power influence.
• Multimode wire tracing tone.
• Resistance fault locator (RFL) and calculator.
• Powerful Time Domain Reflectometer (TDR).
• Built-in loudspeaker dialing with phone book memory.
• Auto-test mode with Pass/Fail.
• USB download of test results and upload of software.
• Analog meter or digital display selectable.
• Big, easy-to-read display with backlight.
• Rechargeable (included) or replaceable batteries.
• Advanced cable diagnosis and troubleshooting in a single test set.
• Quick testing and fast repairs.
• Test data capture for sharing and records.
• Easy to learn, especially for Sidekick family users.
• Field upgradeable software.
• Grounding Resistance Testing.
• Optional Impulse Noise Testing to 30MHz.
• Optional Step Time Domain Reflectometer.
Dimensions
Weight
Resistance
302
Leakage
DC Voltage
AC Voltage
SPECIFICATIONS
10.75" x 4.25" x 2.5"
2 lbs.
Rx1: Reads 0 to 2000 Ω
Rx1K: Reads 0 to 2 MΩ
Rx10K: Reads 0 to 20 MΩ
0 to 300 volts DC
0 to 300 Vrms
Stress Test
Loop Current
Circuit Noise
Circuit Loss
Power Influence
Operating Temp.
Power
0 to 82 dBrnC
0 to 100 mA
0 to 75 dBrnC
-15 to +1 dB
50 to 100 dBrnC
-4°F to +140°F
Four AA batteries
www.greenlee.com
Sidekick® T&ND
SPECIFICATIONS
Cat. No.
UPC No.
Description
1144-5000
1134-1002S
60853
60752
Sidekick T&ND Test Set
Case
Weight
Dimensions
AC Volts
DC Volts
Resistance
Leakage
Stress
2 lbs.
10.75" X 4.25" X 2.5"
300 Vrms max.
± 300 Volts max.
1 Megohm max.
100 Megohm max.
0 to 82 dBrnC
Opens
Loop Current
Load Coil
Circuit Loss
Power Influence
Circuit Noise
Power
0 to 60 kft.
0 to 100 mA
up to 4
+1 to -15 dB
40 to 100 dBrnC
0 to 75 dBrnC
Four AA Batteries
Sidekick® V.O.C.
Communications
• Easy-to-read digital LCD display.
• Internal Dialer for making Transmission Test connections.
• Autotest – performs 22 individual tests at the touch of a button.
• Determines the stressed noise susceptibility of dry and working pairs.
• Measures AC/DC Volts, Leakage, resistance, and loop current.
• Performs circuit loss, circuit noise (metallic noise), and power influence tests.
• Built-in open meter.
• Locates up to 4 load coils.
• Single set up for Tip-Ring, Tip-Ground, and Ring-Ground tests.
• Field replaceable test leads.
• On-screen display of “LOW BATTERY” when batteries are near failure.
1144-5000
• Identifies defective inside wire and jacks.
• Measures resistance, AC/DC volts, quasi square wave, and pair balance.
• Identifies shorts, opens, crosses and grounds.
• Replaces the need for other meters.
• Provides tone for twisted pair or crossed conductor identification.
• Single set-up for testing Tip-Ring, Tip-Ground, and Ring-Ground with
ground connection.
• Field replaceable leads.
• Softcase with adjustable hook.
• Low battery indicator light.
SPECIFICATIONS
Description
1143-5000
1134-1002S
60527
60752
Sidekick V.O.C.
Case
Sidekick® 7B
1134-5029
Cat. No.
UPC No.
Description
1134-5029
1134-1002S
1131-0202
60525
60752
60751
Sidekick 7B
Case
Test Leads
= new product
= Replacement Part
= Accessory
Dimensions
Weight
Resistance
Leakage
DC Voltage
AC Voltage
Stress Test
10.75" x 4.25" x 2.5"
2 lbs.
Rx1: Reads 0 to 2000 Ω; Rx1K: Reads 0 to 2 MΩ
Rx10K: Reads 0 to 20 MΩ
0 to 100 Volts DC
0 to 200 Vrms
0 to 82 dBrnC
303
INTERNATIONAL
SPECIFICATIONS
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Determines the stressed noise susceptibility of dry and working pairs.
• Measures resistance, AC/DC volts, and capacitive kick.
• Provides tone for twisted pair or crossed conductor identification.
• Single setup for testing Tip-Ring, Tip-Ground, and Ring-Ground.
• Minimal drying effect in all ranges.
• Field replaceable leads.
• Softcase with adjustable strand hook.
• Low battery indicator light.
CANADA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Leakage
DC Voltage
AC Voltage
Stress Test
Operating Temp.
Power
USA
1143-5000
10.75 x 4.25 x 2.5 inches
2 lbs.
Rx1: Reads 0 to 2000 Ω
Rx1K: Reads 0 to 2 Megohms
Rx10K: Reads 0 to 20 Megohms
0 to 100 Volts DC
0 to 200 Vrms
0 to 82 dBrnC
-4°F to +140°F
Four AA batteries
Tel: 800.435.0786
Fax: 800.451.2632
Dimensions
Weight
Resistance
MADE FOR THE TRADE!™
Precision Tone Generator
Communications
• Used in the telecommunications industry for pair identification and fault locating.
• Supplies a precise 577.5Hz crystal controlled signal frequency.
• Variable output allows technicians to adjust signal strength to suit field
conditions and improve accuracy.
• Designed to work with any common amplifier and exploring coil for
aerial fault locating.
• For communications over inactive pairs, the unit supplies talk battery to power
two telephone test sets (buttsets).
• Each of the three test leads is equipped with traditional bent nose piercing
clips with “bed-of-nails” insulation piercing pins.
• The tone generator and test leads fit neatly in a durable, protective woven
polyester carrying case with shoulder strap.
• Battery-operated (1 – 6V lantern included).
Cat. No.
UPC No.
Description
177
08657
Precision Tone Generator
SPECIFICATIONS
Power Requirements
Battery Life
Transmitter
Frequency
Output Voltage
Output Signal Level
Construction
Dimensions
Weight
One 6V lantern battery
40 hours nominal
577.5Hz pulsed at 1Hz, crystal controlled
0.1 to 80Vp-p
0 to +30dBm
High impact ABS plastic in woven polyester case
7.25" x 5.5" x 4.5" in case
3 lbs. with battery
• Designed for the telecommunications market, the 88 Load Coil Detector will identify
the presence and count the number of load coils on an active or inactive circuit.
• No complicated screens or test instructions to decipher.
• Designed to withstand the rigors of daily use, the tester speeds troubleshooting
dedicated data circuits. Simply connect the test leads and turn the switch.
• While gradually turning the control, the display will “kick” to signify each coil
detected on the pair.
• Accurately identifies and counts up to four load coils on the circuit under test.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Load Coil Detector
304
SPECIFICATIONS
Power Requirements
Battery Life
Construction
Dimensions
Weight
Cat. No.
UPC No.
Description
88
08656
Load Coil Detector
One 9V battery
100 hours nominal
High impact ABS plastic
4 x 2.25 x 1.5"
5.8 oz. with battery
www.greenlee.com
T-Bug® Digital Signal Identifier
Cat. No.
UPC No.
Description
0134-0500
60764
T-Bug® Digital Signal Identifier
TelScout® TS100
= new product
= Replacement Part
= Accessory
Specifications
Physical
Dimensions
in.
mm
Height
Width
Depth
12
10
3.5
30
25
9
Weight
lb.
kg
Net
6.4
3
305
INTERNATIONAL
Mains Operation –
Voltage Ranges: 110 V, 220 V, 240 V with appropriate AC
to DC adapter.
Battery Operation –
Operating Time: 6 hrs. continuous.
Battery Saver: Selectable for 5 to 30 minutes or disabled.
TelScout® TS100-01 Metallic TDR
TelScout® TDR English 220V Europe
TelScout® TDR French 220V EU
TelScout® TDR German 220V Europe
TelScout® TDR Spanish 120V US
AC Adapter 120V (US)
Vehicle Adapter/DC Adapter
Rechargeable Internal Battery
Leads
CANADA
Power
60520
02110
02141
05701
05619
17350
16407
21638
60754
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Temperature –
Operating: 17° F to 92°F (-15° C to +60° C).
Non-operating: 12° F to 97° F (-20° C to +65° C).
Humidity – 95% RH, non-condensing.
Shock (test specification) – Survives drop of 2 m to
concrete in standard soft case.
Safety – EN 61010-1 and EN61010-031.
EMC – EN61326.
TS100-01
TS100-01E
TS100-01F
TS100-01G
TS100-01S
TS100-0C
174173401
146009800
650391700
USA
Environmental
UPC No. Description
Tel: 800.435.0786
Fax: 800.524.2853
Specifications
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Twisted Pair and Coax Testing in a Single Unit (optional).
• One-Step Setup.
• Automatic and Manual Instrument Control Mode.
• 45 kilofeet Fault Location Capability.
• Rugged – Survives 6 foot (2m) Drop.
• Powered from AC Mains or Rechargeable Internal Battery.
• Single-Button Zoom Function.
• Short Pulse Width Option (Includes Coax Testing Capability).
• Pair Comparison Mode.
• Splits/Crosstalk Mode.
• Intermittent Fault Location.
• Measures Distance to Fault in Feet, Meters, or Time.
• Configurable for Any Cable Type and Vp (0.300 to 1.000).
• Internal Memory Waveform Storage and Trace Upload to PC Software
(MCTAP-Option).
• Serial Printer Output for Stored or Displayed Waveforms.
• Accurate (±3 ft. at 10,000 ft.)
• On-line Tutorials.
• Large Backlit Display.
Communications
• Used to detect digital signals on twisted pair cables, identify and isolate digital
pairs for special handling and help technicians avoid accidentally putting pairs
out of service.
• Operation is non-invasive and does not involve metallic contact so there’s
no risk of service interruption.
• Simple to use – just place the probe between the pairs in question.
• Differential amplifier saves time by allowing the technician to determine
whether the signal is truly present or is an induced signal from adjacent pairs.
• False readings due to noise are virtually eliminated.
• Continuous self test ensures that the unit is functioning properly.
• Emits both visible and audible indication when digital signals are present.
• Patented.
MADE FOR THE TRADE!™
CANADA
• Two Pair Test Capability.
• One-Step Setup.
• Automatic Instrument Control Mode.
• 45,000' (15 km) Fault Location Capability.
• Splash and Drip Proof.
• Single-Button Zoom Function.
• Pair Comparison Mode.
• Splits/Crosstalk Mode.
• Intermittent Fault Location.
• Measures Distance to Fault in Feet, Meters, or Time.
• Configurable for Any Cable Type and Vp (0.300 to 1.000).
• Accurate (±3 ft. at 10,000 ft.).
• On-line Tutorials.
• Large Backlit Display.
Cat. No.
UPC No.
Description
TS90
012154500
THM5BAT
60522
60740
60756
TelScout® TS90
Leads
Rechargeable Battery Pack
Specifications
Environmental
Temperature –
Operating: 32° F to 77°F (0° C to +45° C).
Non-operating: 12° F to 92°F (-20° C to +60° C).
Humidity – 95% RH, non-condensing.
EMI Emissions –
EN55011 class A.
EN60555-2.
Power
Battery Operation –
Battery Type: Six AA Alkaline.
Operating Time: >4.5 hrs. with backlight off.
Battery Saver:
Selectable for 5 to 30 minutes or disabled.
Physical
Dimensions
in.
mm
Height
Width
Depth
5.6
8.3
1.8
141
211
43
Weight
lb.
kg
Net
2.2
1
Tel: +1.815.397.7070
Fax: +1.815.397.9247
CableScout™ TV90
• High performance easy to use, Time Domain Reflectometer for Coaxial
testing applications.
• Employs optimized pulsing and sampling, coupled with advanced
filtering and signal-processing techniques to ensure clean waveform
and easy identification.
• Context-sensitive help screens for all functions.
• Small, portable and lightweight 2.2 lbs. (1kg).
• Includes rechargeable battery pack.
• Includes twisted pair adapter and test probe.
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
Communications
TelScout® TS90
Cat. No.
UPC No.
Description
TV90
THM5BAT
THM5AC
TS90-0350
12600
60756
17299
17398
TV90 CableScout™ TDR
Rechargeable Battery Pack
AC Adapter 110V
Soft Carrying Case
USA
Tel: 800.435.0786
Fax: 800.451.2632
Specifications
306
• Easy to operate (help screens available for all functions)
• Fast fault finding with automatic gain and vertical waveform positioning
• One-button Expand/Full View Function and zoom control.
• Precision accuracy 0-200 ft +- 2 ft. 1% beyond.
• Range up to 4000 ft.
• High-resolution with optimizing pulse and sampling and advanced filtering
• Input Protection: 200 VDC + Peak AC.
• Rugged - designed for harsh environments
• Large 7.2-in. high-resolution backlit display.
• International power supply options
Environmental
Temperature:
Operating:
Non-Operating:
Durability:
Power:
Battery type:
32° F to 77°F (0° C to +45° C).
12° F to 92°F (-20° C to +60° C).
Survives Drop test of 6 foot (2m) to concrete in soft case
110 V, 220 V, 240 V with appropriate power adapter
6 AA Alkaline and NiCad rechargeable pack. 4.5 hours
continuous operation with adjustable battery saver modes
Standards
Compliant:
UL, FCC EMI, CAN/CSA, EN, and CE
www.greenlee.com
CableScout™ TV220TDR
• CableScout TV220: High Performance Time Domain Reflectometer
for Coaxial Applications.
• The TV220 is designed to quickly locate faults that effect digital services
in the Cable TV Network.
• High Frequency acquisition system exposes faults invisible to other TDR’s.
• High signal-to-noise ration (SNR) allows for precision multiple fault
location accuracy.
UPC No.
Description
12599
17404
16407
16414
CableScout™ TV220TDR
Soft Carrying Case
Vehicle DC Adapter/Charger
Replacement Power Cord
Specifications
Easy to operate with on-board Tutorials
Automatic or manual test features
One-button zoom control.
Trace comparison mode
Intermittent Fault location
Automatic event return loss
Input protection to 400 VDC + Peak AC
Internal memory waveform storage and trace upload to PC
Software (MCTAP- Option).
Serial output connector - print directly from unit
Precision accuracy to +- 4 ft. at 12,000'
High-resolution 1 (ns) short pulse width.
Rugged - designed for harsh environments
Large 7.2-in. high-resolution backlit display.
International language and power supply options
Environmental
Temperature:
Operating:
Non-Operating:
Durability:
Power:
Battery type:
Standards Compliant:
22° F to 72°F (-10° C to +40° C).
12° F to 92°F (-20° C to +60° C).
Survives Drop test of 6 foot (2m) to concrete
in soft case
110 V, 220 V, 240 V with appropriate power adapter
Internal Lead Acid rechargeable. 8 hours continuous
operation with adjustable battery saver modes
UL, FCC EMI, CAN/CSA, EN and CE
Communications
Cat. No.
TV220
TV220-0350
174173401
174326900
MCTAP Waveform Analysis Software for TS100/TV220
UPC No.
Description
MCTAP
60755
MCTAP Software
Specifications
• Must have a RS232 port or USB/RS232 convertor to use
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
307
= new product
CANADA
• Waveform data can be exported as BMP, JPEG, and TIF file formats for easy
communication of data
• Waveform data can be exported as text or spreadsheet compatible files for use in word
processors or spreadsheet programs
Tel: 800.435.0786
Fax: 800.524.2853
• TDR waveforms that are saved in the field can be uploaded to a computer for data
management and analysis
USA
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Metallic Cable Trace Analysis Package (MCTAP) is a Windows based program
for viewing and analyzing wave forms acquired by the Tempo TV220 and
TS100 TDR. MCTAP may be installed on computers running Windows
95/98, Windows NT, Windows ME, 2000, XP.
MADE FOR THE TRADE!™
525-90 PON Optical Loss Test Set
Communications
•
•
•
•
•
•
•
•
•
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
UPC No.
Description
525-90
20945
PON Optical Loss Test Set (1310/1490/1550nm)
SPECIFICATIONS
SPECIFICATIONS
308
1310/1490/1550nm.
Automated Insertion/Return Loss measurements.
One button AUTOTEST.
Stores 1000 measurement results.
Cable acceptance software for report generation and
fiber optic cable management.
Optical power meter.
Optical return loss meter.
Rechargeable batteries.
Rugged package for outside plant environment.
POWER METER
Detector Type
InGaAs
Display Range
+10dBm to -70 dBm
Calibrated Wavelengths 850, 980, 1300, 1310, 1490, 1550, 1625
Absolute Accuracy
<±0.25 dB
Resolution
0.01 dB
Measurement Units
dBm, dB
SOURCE
Center Wavelength
1310nm ±30nm 1490nm ±30nm 1550nm ±30nm
Spectral Width
<5
<5
<5
Output Power
>-10dBm
>-10dBm
>-10dBm
Output Stability
<±0.15dB/8 hrs <±0.15dB/8 hrs <±0.15dB/8 hrs
Bulkhead Type
UCI-APC polish adapter 9-125 SM Soc Adapter
See page 329 for available adapters.
AUTOTEST INSERTION LOSS
Test Port
Measurement Range
Calibrated Wavelengths
RETURN LOSS
Measurement Range
Accuracy
GENERAL SPECIFICATIONS
Display Type
Fiber Type
Standard Adapter Type
Laser Classification
Operating Temperature
Storage Temperature
Relative Humidity
Size
Weight
Power
Battery Life
40dB
1310, 1490, 1550nm
10 to 45dB
.5dB
Graphics Liquid Crystal with Backlight
Singlemode 9/125 um
FC, SC, ST other adapter options available
Class 1 CFR 1040
0° C to +50° C
-20° C to +60° C
0 to 95% RH non-condensing
7.6 x 4.3 x 2.3 in. (19.3 x 10.9 x 5.8 cm)
2.2 lbs. (1.0 kg)
Internal rechargeable NiMH
> 8 hours
www.greenlee.com
525-60 Smart Optical Loss Test Set
Cat. No.
UPC No. Description
525-60-PCX
525-60-APC
525-60RL-APC
20942
20943
20944
1310/1550nm Smart Optical Loss Test Set - PC Connectors
1310/1550nm Smart Optical Loss Test Set - APC Connectors
1310/1550nm Smart Optical Loss Test Set - APC Connectors
SPECIFICATIONS
InGaAs
+10dBm to -70dBm
850, 980, 1300, 1310,
1550, 1480, 1625
±0.25dB
0.01dB
dBm, dB, W
UCI-APC polish
adapter 9/125 SM
1310nm ±30nm 1550nm ±30nm
<5
<5
>-10 dBm
>-10 dBm
±0.15dB/
±0.15dB
8 hours
8 hours
1310nm ±30nm 1550nm ±30nm
<5
<5
>-10 dBm
>-10 dBm
±0.15dB/
±0.15dB
8 hours
8 hours
1310nm ±30nm 1550nm ±30nm
<5
<5
>-10 dBm
>-10 dBm
±0.15dB/
±0.15dB
8 hours
8 hours
40dB
1310, 1550nm
40dB
1310, 1550nm
40dB
1310, 1550nm
10 to 45dB
.5dB
10 to 65dB
.5dB
10 to 65dB
.5dB
Graphics Liquid Crystal
with Backlight
Singlemode 9/125 um
FC, SC, ST other adapter
options available
Class 1 CFR 1040
0°C to +50°C
-20°C to +60°C
0 to 95% RH non-condensing
19.3 x 10.9 x 5.8 cm
(7.6 x 4.3 x 2.3 in)
1.0kg (2.2 lbs)
Internal rechargeable NiMH
>8 hours
Graphics Liquid Crystal
with Backlight
Singlemode 9/125 um
FC, SC, ST other adapter
options available
Class 1 CFR 1040
0°C to +50°C
-20°C to +60°C
0 to 95% RH non-condensing
19.3 x 10.9 x 5.8 cm
(7.6 x 4.3 x 2.3 in)
1.0kg (2.2 lbs)
Internal rechargeable NiMH
>8 hours
Graphics Liquid Crystal
with Backlight
Singlemode 9/125 um
FC, SC, ST other adapter
options available
Class 1 CFR 1040
0°C to +50°C
-20°C to +60°C
0 to 95% RH non-condensing
19.3 x 10.9 x 5.8 cm
(7.6 x 4.3 x 2.3 in)
1.0kg (2.2 lbs)
Internal rechargeable NiMH
>8 hours
309
= new product
= Replacement Part
= Accessory
INTERNATIONAL
InGaAs
+10dBm to -70dBm
850, 980, 1300, 1310,
1550, 1480, 1625
±0.25dB
0.01dB
dBm, dB, W
UCI-APC polish
adapter 9/125 SM
CANADA
InGaAs
+10dBm to -70dBm
850, 980, 1300, 1310,
1550, 1480, 1625
±0.25dB
0.01dB
dBm, dB, W
UCI-UPC flat polish
adapter 9/125SM
USA
525-60RL-APC
Singlemode Smart Loss
Test Set
APC Connector Interface
AUTOTEST performs
Insertion and Return
Loss in one Test
Tel: +1.815.397.7070
Fax: +1.815.397.9247
525-60-APC
Singlemode Smart Loss
Test Set
APC Connector Interface
AUTOTEST performs
Insertion Loss Test
and Manual Return Loss
Tel: 800.435.0786
Fax: 800.524.2853
Source Specifications
Center Wavelength
Spectral Width
Output Power
Output Stability
Autotest Insertion Loss Specifications
Test Port Measurement Range
Calibrated Wavelengths
Return Loss Specifications
Measurement Range
Accuracy
General Descriptions
Display Type
Fiber Type
Standard Adapter Type
Laser Classification
Operating Temperature
Storage Temperature
Relative Humidity
Size
Weight
Power
Battery Life
525-60-PCX
Singlemode Smart Loss
Test Set
PC Connector Interface
AUTOTEST performs
Insertion Loss Test
and Manual Return Loss
Tel: 800.435.0786
Fax: 800.451.2632
Instrument Type
Interface Connector
AUTOTEST
measurements
Power Meter Specifications
Detector Type
Display Range
Calibrated Wavelengths
Absolute Accuracy
Resolution
Measurement Units
Adapter Type
Communications
• Automated bi-directional testing.
• Optical return loss measurements.
• Dual wavelength insertion loss measurements.
• Multi-mode and Single-mode models feature user settable
PASS/FAIL thresholds.
• Communications between units via messaging.
• Wide dynamic range optical power meter.
• Test record storage and data management software.
• Rugged outside plant instrument package.
• Universal connector interface.
MADE FOR THE TRADE!™
Communications
525-30 Smart Optical Loss Test Set
• Automated bi-directional testing.
• Optical return loss measurements.
• Dual wavelength insertion loss measurements.
• Multi-mode and Single-mode models feature user settable
PASS/FAIL thresholds.
• Communications between units via messaging.
• Wide dynamic range optical power meter.
• Test record storage and data management software.
• Rugged outside plant instrument package.
• Universal connector interface.
SPECIFICATIONS
POWER METER
Dector Type
InGaAs
Display Range
+10dBm to -70dBm
Calibrated Wavelengths 850, 980, 1300, 1310, 1550, 1480, 1625
Absolute Accuracy
<±0.25 dB
Resolution
0.01 dB
Measurement Units
dBm, dB, W
SOURCE
Center Wavelength
850nm ±30nm 1300nm ±30nm
Spectral Width
<170
<170
Output Power
>-21dBm
>-21dBm
Output Stability
<±0.10dB/8 hrs <±0.10dB/8 hrs
HOMP
0.03dB to 0.80dB
Adapter Type
UCI-APC flat polish adapter 62.5/125 SM
See page 329 for available adapters.
Cat. No.
UPC No.
Description
525-30-PCX
49981
850/1300nm Smart Optical Loss Test Set - PC Connectors
AUTOTEST INSERTION LOSS
Test Port
Measurement Range
Calibrated Wavelengths
GENERAL SPECIFICATIONS
Display Type
Fiber Type
Standard Adapter Type
Operating Temperature
Storage Temperature
Relative Humidity
Size
Weight
Power
Battery Life
25dB
850, 1300nm
Graphics Liquid Crystal with Backlight
Multimode 62.5/125 um
FC, SC, ST or other adapter options available
0° C to +50° C
-20° C to +60° C
0 to 95% RH non-condensing
7.6 x 4.3 x 2.3 in. (19.3 x 10.9 x 5.8 cm)
2.2 lbs. (1.0 kg)
Internal rechargeable NiMH
> 8 hours
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Easy to use - three buttons control all functions.
• Loss measurements in (dB); power measurements in (dBm).
• 0.01dB measurement resolution.
• Multi-wavelength storage - store and recall reference power levels
for faster, more efficient measurements.
• Snap-On connector interface adapts to FC, SC and ST connectors.
• Long battery life.
• User selectable auto shut-off.
• Rugged and splash-proof.
• Economically priced.
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Fiber Optic Power Meter
310
Cat. No.
UPC No.
Description
560XL
84485
Fiber Optic Power Meter
SPECIFICATIONS
SPECIFICATIONS
EnviroNmental
Operating temperature
Storage temperature
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Optical
Calibration Wavelengths
Power Range
Accuracy
Linearity
+3dBm to -3dBm
-3dBm to -50dBm
-50dBm to -60dBm
Resolution
Power Requirements
Connector interface
850nm, 1300nm,
1310nm and 1550nm
+3 dBm to -60 dBm
± 0.25dB
±0.5dB
±0.05dB
±0.5dB
0.01dB
Two AA size 1.5V batteries
(approx. 100 hours continuous operation)
FC, SC or ST Soc Adapter
www.greenlee.com
850/1300nm LED Source
• 850/1300nm wavelengths.
• Stable calibrated output.
• Easy to use.
• Continuous wave and modulated output.
• Fixed connector interface FC, SC or ST.
• Long battery life - approx. 80 hours.
• User selectable auto shut-off.
• Rugged and splash-proof.
• Economically priced.
UPC No.
Description
570XL-FC
570XL-SC
570XL-ST
84486
84487
84488
850/1300nm LED source w/FC interface
850/1300nm LED source w/SC interface
850/1300nm LED source w/ST interface
SPECIFICATIONS
SPECIFICATIONS
EnviroNmental
Operating temp.
Storage temp.
Humidity
Dimensions
Weight
CE
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Optical
Center Wavelengths
Range (typical)
Max. spectral width
Stability (1 hour)
Typical power output
100/140um
62.5/125um
50/125um
Modulation frequency
Power Requirements
850nm
840nm to 880nm
55nm
±0.05dB
1300nm
1270nm to 1345nm
150nm
±0.05dB
-13dBm
-13dBm
-14dBm
-20dBm
-20dBm
-21dBm
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
(approx. 80 hours continuous operation)
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
Connector interface
FC, SC or ST
FC, SC or ST
Communications
Cat. No.
1310/1550nm Laser Source
Description
84489
84490
84491
1310/1550nm Laser source w/FC interface
1310/1550nm Laser source w/SC interface
1310/1550nm Laser source w/ST interface
SPECIFICATIONS
= new product
-15° C to +55° C
-35° C to +70° C
0 to 95% non-condensing
7.2 x 14.2 x 3.5 cm (2.8 x 5.6 x 1.4 in.)
241g (8.5 oz.)
EN61010; EN50081-1: 1992; EN55011,
Group 1, Class A EN50082-1:
1992 IEC 801-2, -3, -4
Class 1
= Replacement Part
= Accessory
1550nm
1520nm to 1580nm
<5nm
±0.05dB
-8dBm
-7dBm
-8dBm
-7dBm
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
(approx. 80 hours continuous operation)
270 kHz, 1 kHz and 2 kHz
Two AA size 1.5V batteries
Connector interface
FC, SC or ST
FC, SC or ST
311
INTERNATIONAL
EnviroNmental
Operating temp.
Storage temp.
Humidity
Dimensions
Weight
CE
CDRH Laser Class
1310nm
1280nm to 1340nm
<5nm
±0.05dB
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
Optical
Center Wavelengths
Range (typical)
Max. spectral width
Stability (1 hour)
Typical power output (9/125)
Minimum
Typical
Modulation frequency
Power Requirements
CANADA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
580XL-FC
580XL-SC
580XL-ST
USA
Tel: 800.435.0786
Fax: 800.451.2632
• 1310/1550nm wavelengths.
• Stable calibrated output.
• Easy to use.
• Continuous wave and modulated output.
• Fixed connect interface FC, SC or ST.
• Long battery life - approx. 80 hours.
• User selectable auto shut-off.
• Rugged and splash-proof.
• Economically priced.
MADE FOR THE TRADE!™
Visual Fault Finder
Communications
• Continuous wave output mode for steady fault location.
• Find breaks to 5km.
• Blinking output mode increases viewing contrast.
• Easy to use quick interface fits all 2.5mm connector interfaces (FC, SC, ST).
• 1.0mW output power.
• Ergonomic rotary switch permits easy one-handed operation.
• Rugged, compact and splash-proof aluminum design.
• Two AA batteries provide 48 hours continuous operation.
• Nylon belt holster included.
Cat. No.
UPC No.
Description
170XL
84501
Visual Fault Finder
SPECIFICATIONS
SPECIFICATIONS
EnviroNmental
Operating temp.
Storage temp.
Humidity
Dimensions
Weight
CDRH Laser Class:
CE
-10° C to +50° C
-40° C to +60° C
0 to 95% non-condensing
Length: 22 cm (9.0 in.);
Diameter: 2.54 cm (1 in.)
200g (7 oz.)
Class IIIa
IEC 60-1-2 portion of the EN50082-1 ESD
immunity requirement EN50082-1:
1992 IEC 801-2, -3, -4
Optical
Light source type
635nm red laser diode
Center wavelength
Nominal
635nm
Range (typical)
630nm to 640nm
Spectral width (FWHM) <2nm
Typical output power
1.0mW (0dBm) into Single Mode (SMF-28) fiber
Blink frequency in
MOD mode
<3hz approximate)
Power Requirements
Two AA size 1.5V batteries
(Battery life Approx. 48 hours continuous operation)
Connector interface
Standard “Quick Connect” universal
2.5 mm receptacle
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Multimode Fiber Optic Test Set
312
•
•
•
•
•
•
Insertion loss test set for multimode fiber.
850/1300nm loss measurements.
Connector for FC, SC or ST.
Rugged package design.
Easy to use portable package.
Economically priced.
Cat. No.
UPC No.
Description
5670-FC
5670-SC
5670-ST
84492
84493
84494
Multimode Fiber Optic Test Set w/FC interface
Multimode Fiber Optic Test Set w/SC interface
Multimode Fiber Optic Test Set w/ST interface
KIT SPECIFICATIONS
5670-FC Includes:
560xl Optical Power Meter
570xl-fc 850/1300nm Led Source w/fc Connector
T1020 Fc/pc Soc Adapter
914B Carrying Case
5670-SC Includes:
560xl Optical Power Meter
570xl-sc 850/1300nm Led Source w/sc Connector
1062 Sc/pc Soc Adapter
914b Carrying Case
5670-ST Includes:
560XL Optical Power Meter
570XL-ST 850/1300nm LED Source w/ST Connector
T1030 ST/PC SOC Adapter
914B Carrying Case
www.greenlee.com
Singlemode Fiber Optic Test Set
•
•
•
•
•
•
Insertion loss test set for singlemode fiber.
1310/1550nm loss measurements.
Connector for FC, SC or ST.
Rugged package design.
Easy to use portable package.
Economically priced.
UPC No.
Description
5680-FC
5680-SC
5680-ST
84495
84496
84497
Singlemode Fiber Optic Test Set w/FC interface
Singlemode Fiber Optic Test Set w/SC interface
Singlemode Fiber Optic Test Set w/ST interface
KIT SPECIFICATIONS
5680-FC Includes:
560XL Optical Power Meter
580XL-FC 1310/1550nm Laser Source w/FC Connector
T1020 FC/PC SOC Adapter
914B Carrying Case
5680-SC Includes:
560XL Optical Power Meter
580XL-SC 1310/1550nm Laser Source w/SC Connector
1062 SC/PC SOC Adapter
914B Carrying Case
5680-ST Includes:
560XL Optical Power Meter
580XL-ST 1310/1550nm Laser Source w/ST Connector
T1030 ST/PC SOC Adapter
914B Carrying Case
Communications
Cat. No.
Multimode and Singlemode Fiber Optic Test Set
5890-FC
5890-SC
5890-ST
84498
84499
84500
Multimode and Singlemode Fiber Optic Test Set w/FC interface
Multimode and Singlemode Fiber Optic Test Set w/SC interface
Multimode and Singlemode Fiber Optic Test Set w/ST interface
KIT SPECIFICATIONS
= Replacement Part
= Accessory
313
INTERNATIONAL
= new product
Tel: +1.815.397.7070
Fax: +1.815.397.9247
5890-FC Includes:
560XL Optical Power Meter
570XL-FC 850/1300nm LED Source w/FC Connector
580XL-FC 1310/1550nm Laser Source w/FC Connector
T1020 FC/PC SOC Adapter
915B Carrying Case
5890-SC Includes:
560XL Optical Power Meter
570XL-SC 850/1300nm LED Source w/SC Connector
580XL-SC 1310/1550nm Laser Source w/SC Connector
1062 SC/PC SOC Adapter
915B Carrying Case
5890-ST Includes:
560XL Optical Power Meter
570XL-ST 850/1300nm LED Source w/ST Connector
580XL-ST 1310/1550nm Laser Source w/ST Connector
T1030 ST/PC SOC Adapter
915B Carrying Case
CANADA
Description
USA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Insertion loss test set for multimode and singlemode fiber.
• 850/1300nm Loss measurements.
• 1310/1550nm Loss measurements.
• Connector for FC, SC or ST.
• Rugged package design.
• Easy to use portable package.
• Economically priced.
MADE FOR THE TRADE!™
920xc Handheld Multimode otdr
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Communications
•
•
•
•
•
•
•
•
•
•
Economical.
Compact handheld design.
Easy to use.
Fast automated testing.
Up to 22db dynamic range.
Large backlight LCD display.
Measure length and defects of coiled fiber.
Fiber analysis software for data management and report generation.
RS-232/USB interface.
NiMH batteries for 8 hours continuous use.
Cat. No.
UPC No.
920XC-20M PC FC
920XC-20M PC SC
920XC-20M PC ST
946
948
20988
20989
20990
AC-CONN-FC-L2
AC-CONN-ST-L2
AC-CONN-SC-L2
AC-ADPT-20-UNIV
920XC-QR
20999
1155-0526
920XC-SM-MM
MULTIMODE specifications
Fiber Type
Wavelength (± 20nm)
Dynamic Range (dB)
Event deadzone (m)
Attenuation Deadzone (m)
Emitter Type
Pulsewidth (ns)
Selectable Ranges (km)
Average Time
Distance measurement accuracy
Connector Type
25688
25689
25690
60571
60692
20988
20989
20990
20996
20997
20998
25691
25692
20999
10582
26307
850
18
7
20
LED
12/30/100/275/1us
0.1/0.3/0.5/1.3/2.5/5/10
Description
Handheld OTDR, 850/1300nm, FC/PC
Handheld OTDR, 850/1300nm, SC/PC
Handheld OTDR, 850/1300nm, ST/PC
Cleaning Wand 10/PK
REEL Cleener CONN Cleaner (948)
Soft Carrying Case
USB Cable for OTDR
RS-232 Cable
FC Connector (for UPC & APC)
ST Connector (for UPC only)
SC Connector (for UPC & APC)
Power Supply Universal
Quick Reference Guide - UN
NiMH Battery (9.6V)
Car Adapter
OTDR Kit - Single and Multimode OTDR Kit.
920XC-20M
1300
22
30/100/275/1us/2us
0.1/0.3/0.5/1.3/2.5/5/10/20/40/80
15s/30s/1 min/2 min/3 min
±(1m + 5 X 105 x distance + sampling space)
PC (interchangeable FC, SC, ST)
Fiber Analysis Software
Reflection detect accuracy
Attenuation detect accuracy
Measurement data storage
Data transmission
±4 dB
±0.05 dB/dB
1,000 test curves
RS-232/USB port
USA
Tel: 800.435.0786
Fax: 800.451.2632
General
314
Power Supply
Battery Life
Operating Temperature
Storage Temperature
Relative Humidity
Weight
Dimensions
NiMH chargeable battery/AC adapter
Support over 8 hours operating on one charge or over 20 hours standby
-10° to 50° C
-20° to 60° C
0 to 95% (non-condensing)
1.9 lbs. (0.87 kg)
7.7" H x 3.9" W x 2.4" L (196mm x 100mm x 64mm)
www.greenlee.com
920xc Handheld Singlemode otdr
•
•
•
•
•
•
Up to 38db dynamic range.
Large backlight LCD display.
Measure length and defects of coiled fiber.
Fiber analysis software for data management and report generation.
1625 nm operation for live fiver testing.
RS-232/USB interface.
Cat. No.
UPC No.
Handheld OTDR, 1310/1550nm, SC/UPC
Handheld OTDR, 1310/1550nm, FC/UPC
Handheld OTDR, 1310/1550nm, ST/UPC
Handheld OTDR, 1310/1550nm, SC/APC
Handheld OTDR, 1310/1550nm, FC/APC
Handheld OTDR, 1310/1490/1550nm, SC/UPC
Handheld OTDR, 1310/1490/1550nm, FC/UPC
Handheld OTDR, 1310/1490/1550nm, ST/UPC
Handheld OTDR, 1310/1490/1550nm, SC/APC
Handheld OTDR, 1310/1490/1550nm, FC/APC
Handheld OTDR, 1310/1550/1625nm, SC/UPC
Handheld OTDR, 1310/1550/1625nm, FC/UPC
Handheld OTDR, 1310/1550/1625nm, ST/UPC
Handheld OTDR, 1310/1550/1625nm, SC/APC
Handheld OTDR, 1310/1550/1625nm, FC/APC
Cleaning Wand 10/PK
REEL Cleener CONN Cleaner (948)
Soft Carrying Case
USB Cable for OTDR
RS-232 Cable
FC Connector (for UPC & APC)
ST Connector (for UPC only)
SC Connector (for UPC & APC)
Power Supply Universal
Quick Reference Guide - UN
NiMH Battery (9.6V)
Car Adapter
OTDR Kit - Single and Multimode OTDR Kit.
920XC-30P
1310/1490/1550
38
2.5
14
n/a
n/a
n/a
±4 dB
±0.05 dB/dB
1,000 test curves
RS-232/USB port
General
Power Supply
Battery Life
Operating Temperature
Storage Temperature
Relative Humidity
Weight
Dimensions
= new product
= Replacement Part
NiMH chargeable battery/AC adapter
Support over 8 hours operating on one charge or over 20 hours standby
-10° to 50° C
-20° to 60° C
0 to 95% (non-condensing)
1.9 lbs. (0.87 kg)
7.7" H x 3.9" W x 2.4" L (196mm x 100mm x 64mm)
= Accessory
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Fiber Analysis Software
Reflection detect accuracy
Attenuation detect accuracy
Measurement data storage
Data transmission
315
INTERNATIONAL
650 nm
3 mw
(interchangeable FC, SC, ST)
CANADA
Visual Fault Locator
Wavelength
Peak power output
Connector interface
Tel: 800.435.0786
Fax: 800.524.2853
920XC-30F
1310/1550/1625
38
1.5
10
Laser
5, 10, 30, 100, 300, 1us, 2.5us, 10us, 20us
0.3/1.3/2.5/5/10/20/40/80/120/160/240
15s/30s/1 min/2 min/3 min
±(1m + 5 X 105 x distance + sampling space)
PC or APC (interchangeable FC, SC, ST)
USA
920XC-20C
1310/1550
35
2.5
14
Description
Tel: 800.435.0786
Fax: 800.451.2632
SINGLEMODE specifications
Fiber Type
Wavelength (± 20nm)
Dynamic Range (dB)
Event deadzone (m)
Attenuation Deadzone (m)
Emitter Type
Pulsewidth (ns)
Selectable Ranges (km)
Average Time
Distance measurement accuracy
Connector Type
89882
89872
89877
89892
89887
19237
19238
19239
19240
19252
19247
19248
19251
19249
19250
60571
60692
20988
20989
20990
20996
20997
20998
25691
25692
20999
10582
26307
Communications
920XC-20C UPC SC
920XC-20C UPC FC
920XC-20C UPC ST
920XC-20C APC SC
920XC-20C APC FC
920XC-30P UPC SC
920XC-30P UPC FC
920XC-30P UPC ST
920XC-30P APC SC
920XC-30P APC FC
920XC-30F UPC SC
920XC-30F UPC FC
920XC-30F UPC ST
920XC-30F APC SC
920XC-30F APC FC
946
948
20988
20989
20990
AC-CONN-FC-L2
AC-CONN-ST-L2
AC-CONN-SC-L2
AC-ADPT-20-UNIV
920XC-QR
20999
1155-0526
920XC-SM-MM
MADE FOR THE TRADE!™
Communications
Optical Fiber Monitors
OFM1020
• mm Resolution.
• Zero Deadzone.
• 90dB Return loss dynamic range.
• 850/1300 nm operation.
• Measure optical components, cables and sensors.
• Monitor bend loss and fiber stress.
• Universal optical interface.
• Ruggedized for field deployment.
• AC/DC operation.
• Custom configurations available (fiber, outputs, wavelengths).
OFM1020
OFM130
• mm Resolution.
• Zero Deadzone.
• 85dB Return loss dynamic range.
• 1310/1490/1550/1625 nm operation.
• Measure optical components, cables and sensors.
• Analyze optical amplifiers.
• Monitor bend loss and fiber stress.
• Custom configurations available (fiber, outputs, wavelengths).
OFM130
specifications
Fiber Type
Cat. No.
UPC No.
Description
OFM1020-85M10
21100
TFM150-C
3030-013
25894
10110
Ruggedized Short Wavelength Hi-Res OTDR
with Cal-Kit
Tunable C-Band Hi-Res OTDR
Long Wavelength Hi-Res OTDR
OFM1020
OFM130
TFM150
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Distance
Range
Accuracy
Single Point Resolution
Two Point Resolution
0-20 km (65,000 ft.)
0.02% + 2.5cm (1")
5 mm (0.2")
10 cm (4")
Deadzone
Event
Attenuation
12 cm typical (5")
38 cm typical (15")
Return Loss
Dynamic Range
Accuracy
90dB
85dB
±1.0dB
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Insertion loss, fresnel
Dynamic Range
Accuracy
40dB
35dB
±0.3dB
insertion loss, rayleigh
Dynamic Range
Accuracy
20dB
15dB
±0.02 dB
wavelength
Accuracy
Spectral Width
40 nm
20 nm
40 nm
20 nm
0.12 nm
<0.3 nm
36 cm x 48 cm x 20 cm
(14.2"x18.9"x7.9")
11 kg (24 lb.)
35 cm x 39 cm x 20 cm
(13.8"x15.3"x7.9")
9.5 kg (21 lb.)
57 cm x 47 cm x 19 cm
(22.4"x18.5"x7.5")
16 kg (36 lb.)
24V
110/220V, 60/400Hz
n/a
n/a
USA
Tel: 800.435.0786
Fax: 800.451.2632
Mechanical
316
Size
Weight
power
AC
DC
www.greenlee.com
Optical Loss Test Sets
523B-13/15
105202K
6052B2K
60556MT
253B+557B
PACKAGE
Handheld
Palm-sized
Palm-sized
Palm-sized
Palm-sized
SOURCE TYPE
Laser
Laser
LED
LED
LED
CALIBRATION WAVELENGTHS (nm)
1310/1550
1310/1550
850/1300
850/1300
650
MEASUREMENT RANGE
+3 to -75dBm
+3 to -60dBm
+3 to -60dBm
+3 to -60dBm
+3 to -60dBm
MEASUREMENT UNITS
dB, dBm, W
dB, dBm
dB, dBm
dB, dBm
dB, dBm
Storage Capability
✔
Single-mode
✔
✔
✔
✔
Multimode (glass)
Multimode (POF)
✔
Talk Function
523B-13/15
105202K
6052B2K
60556MT
Communications
model no.
253B + 557B
Advanced Single-Mode Optical Loss Test Set
Advanced Single-Mode Optical Loss Test Set
R equires one SOC and one UCI connector adapter (See pages 329 and 330). Source output is directly compatible with PC connectors.
For APC use hybrid cable approach (See page 331).
317
= new product
= Replacement Part
= Accessory
INTERNATIONAL
60550
CANADA
523B-13/15
USA
Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Incorporates a stable dual 1310nm/1550nm laser source and optical
power meter in a convenient self-contained package to perform insertion
loss and link loss testing.
• Large, backlit LCD makes it easy to view power levels and
calibration wavelengths.
• Operation is simple due to the user-friendly keypad and intuitive controls.
• Remote operation permits the automation of tedious or
repetitive measurements.
• Rubber boot protects against dropping.
• Rugged and splashproof.
• Indium-gallium-arsenide (InGaAs) photodetector.
• 1310/1550nm dual laser source.
• +3dBm to -75dBm measurement range.
• PASS/FAIL testing with audible signal.
• Manual or timer-driven data logging for periods from
one second to one hour.
• Data storage for 1,000 measurements.
• RS232 interface for instrument configuration and data transfer
to a PC-compatible workstation or serial printer.
• Powered by a rechargeable nickel-metal hydride (NiMH) battery pack,
four alkaline batteries or AC adapter.
• Built-in NiMH battery charger with external power supply.
MADE FOR THE TRADE!™
fiberTOOLS® Single-Mode Optical Loss Test Sets
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Communications
• These conveniently packaged test sets are used to test, troubleshoot
and maintain Telco, CATV, LAN and other single-mode network
applications. The Basic Set can be used to measure output power
and certify end-to-end attenuation on deployed fiber spans.
• Easy to use, all-in-one prepackaged kit.
• Dual wavelength 1310/1550nm source covers all requirements.
• Source has stable, calibrated output.
• Rugged, splashproof instruments.
• Water- and air-tight hard carrying case.
• Meets the link certification requirements of TIA-568B and ISO/IEC-11801.
• 0.01dB measurement resolution.
• Two AA batteries provide power for over 100 hours in the optical power
meters, over 50 hours in the LED sources and over 48 hours in the visual
fault finder.
Basic Sets Include:
• 555B Optical Power Meter plus adapter.
• 262A Dual Wavelength 1310/1550nm Laser Source plus adapters.
• Hard carrying case (900B).
Deluxe Sets Include:
• Basic Set contents.
• Visual fault finder T160.
• Connector cleaner.
• Cleaning wands.
318
Cat. No.
Basic Single-Mode Test Sets
10520E2
105202K
105203K
105206K
1052011
Deluxe Single-Mode Test Sets
11520E2
115202K
115203K
115206K
115201U
90ACK
To accommodate other connector types, see
our SOC/UCI adapters on pages 329 and 330
and reference cables on page 333.
UPC No.
60611
60608
60609
60610
60607
Description
Basic SM Test Set E2000-PC
Basic SM Test Set, FC-PC
Basic SM Test Set, ST-PC
Basic SM Test Set, SC-PC
Basic SM Test Set, DIN
60618
Deluxe SM Test Set E2000-PC
60615
Deluxe SM Test Set, FC-PC
60616
Deluxe SM Test Set, ST-PC
60617
Deluxe SM Test Set, SC-PC
60614
Deluxe SM Test Set, DIN
60686 AC/Main Power Converter 120V
(one required per handheld unit)
www.greenlee.com
fiberTOOLS® Multimode Optical Loss Test Sets
Cat. No.
UPC No.
Description
Cat. No.
MM 50/125 Basic Multimode Test Sets
UPC No.
MM 50/125
Description
Deluxe Multimode Test Sets
5052BE2
60627
Basic MM Test Set, E2000-PC
5152BE2
60635
Deluxe MM Test Set E2000-PC
5052B2K
60624
Basic MM Test Set, FC-PC
5152B2K
60632
Deluxe MM Test Set, FC-PC
5052B3K
60625
Basic MM Test Set, ST-PC
5152B3K
60633
Deluxe MM Test Set, ST-PC
5052B6K
60626
Basic MM Test Set, SC-PC
5152B6K
60634
Deluxe MM Test Set, SC-PC
5052BIU
60623
Basic MM Test Set, DIN
5152BIU
60631
Deluxe MM Test Set DIN
90ACK
60686
AC/Main Power Converter 120V
90ACK
60686
(one required per handheld unit)
AC/Main Power Converter 120V
(one required per handheld unit)
60576MT
60727
Basic MM Test Set, 850nm
Dual Wavelength 850/1300nm MT-RJ Test Sets
90ACK
60686
= new product
AC/Main Power Converter 120V
(one required per handheld unit)
= Replacement Part
= Accessory
319
INTERNATIONAL
Basic MM Test Set, 1300nm
CANADA
60555
USA
60556MT
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Description
Tel: 800.435.0786
Fax: 800.524.2853
UPC No.
Single Wavelength MT-RJ Test Sets
• Our MT-RJ Test Sets provide all the equipment required to test,
troubleshoot and certify multimode optical links.
• Easy to use, all-in-one prepackaged kit.
• Both 850 and 1300nm LED sources available.
• Rugged, splashproof instruments.
• Conveniently packaged in a water- and air-tight hard case.
• Meets the link certification requirements of TIA-568B and ISO/IEC-11801.
• 0.01dB measurement resolution.
• Two AA batteries provide power for over 100 hours in the optical power
meters, over 24 hours in the LED sources and over 48 hours in the visual
fault finder.
Basic Single Wavelength Test Sets Include:
• 556MT Optical Power Meter plus MT-RJ adapter.
• 255MT (1300nm) or 257MT (850nm) LED Source.
• Hard carrying case (900B).
Dual Wavelength Deluxe Test Sets Include:
• 556MT Optical Power Meter plus MT-RJ adapter.
• 255MT 1300nm MT-RJ LED Source.
• 257MT 850nm MT-RJ LED Source.
• MTRJ connector cleaner.
• Hard carrying case (901B).
• 263MT MT-RJ visual fault finder.
• Cleaning wands.
Tel: 800.435.0786
Fax: 800.451.2632
fiberTOOLS® MT-RJ Optical Loss Test Sets
Cat. No.
Communications
• These conveniently packaged test sets are used to test,
troubleshoot and maintain LAN and other network applications.
• Easy to use, all-in-one prepackaged kit.
• Dual wavelength 850/1300nm LED source(s) covers all requirements.
• Rugged, splashproof instruments.
• Water- and air-tight hard carrying case.
• Meet the link certification requirements of TIA-568B and ISO/IEC-11801.
• 0.01dB measurement resolution.
• Two AA batteries provide power for over 100 hours in the optical power
meters, over 24 hours in the LED sources and over 48 hours in the visual
fault finder.
Basic Sets Include:
• 555B Optical Power Meter plus adapter.
• 252B Dual Wavelength 850/1300nm LED Source plus 2x adapters.
• Hard carrying case (900B).
Deluxe Sets Include:
• Basic Set contents.
• Visual fault finder T160L.
• Connector cleaner.
• Cleaning wands.
MADE FOR THE TRADE!™
Optical Power Meters
model no.
522B
PACKAGE
555B
556MT
Handheld
Handheld
Palm-sized
Palm-sized
1 mm InGaAs
Filtered 2 mm InGaAs
1 mm InGaAs
3 mm Ge
850/980/1310/
1480/1550/1625
850/980/1310/
1480/1550/1625
MEASUREMENT RANGE
+3 to -75dBm
+25 to -53dBm
+3 to -60dBm
MEASUREMENT UNITS
dB, dBm, mW
dB, dBm, mW
dB, dBm
OPTICAL POWER METER
INTERFACE TYPE
SOC Adapter
SOC Adapter
User-Selectable Auto Shutoff
✔
✔
Storage Capability
✔
✔
detector TYPE
CALIBRATION
WAVELENGTHS (nm)
Communications
522B-HP
522B-HP
522B
850/1300/1310/1550 850/1300/1550
557B
558B
Palm-sized
Palm-sized
3 x 3.5 mm Silicon Filtered 2 mm InGaAs
635/780/850
980/1310/1550
+3 to -40dBm
+3 to -60dBm
+25 to -30dBm
dB, dBm
dB, dBm
dB, dBm
SOC Adapter
SOC Adapter
SOC Adapter
SOC Adapter
✔
✔
✔
✔
557B
558B
556MT
555B
CANADA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Designed for insertion loss and link loss measurements using an external
light source.
• Large, backlit LCD makes it easy to view power levels
and calibration wavelengths.
• Operation is simple due to the user-friendly keypad and intuitive controls.
• Remote operation permits the automation of tedious
or repetitive measurements.
• Rubber boot protects against dropping.
• Rugged and splashproof.
• 850nm, 980nm, 1310nm, 1480nm, 1550nm and 1625nm
calibration wavelengths.
• InGaAs photodetector.
• +3dBm to -75dBm measurement range.
• PASS/FAIL testing with audible signal.
• Manual or timer-driven data logging for periods from one second to one hour.
• Data storage for 1,000 measurements.
• RS232 interface for instrument configuration and data transfer
to a PC-compatible workstation or serial printer.
• Powered by a rechargeable nickel-metal hydride (NiMH) battery pack,
four alkaline batteries or AC adapter.
• Built-in NiMH battery charger with external power supply.
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
Advanced Optical Power Meters
USA
Tel: 800.435.0786
Fax: 800.451.2632
522B
320
To accommodate other connector types, see
our SOC/UCI adapters on pages 329 and 330
and reference cables on page 333.
Cat. No.
UPC No.
Description
522B
522B-HP
60548
60549
Advanced Optical Power Meter, Medium Power to +3dBm
Advanced Optical Power Meter, High Power to +27dBm
Requires one Snap-On Connector (SOC) interface (See pages 329 and 330). Compatible with both PC and APC connectors.
www.greenlee.com
InGaAs Optical Power Meter
Cat. No.
UPC No.
Description
555B
90ACK
60567
60686
InGaAs Optical Power Meter
AC/Main Power Converter 120V (one required per handheld unit)
Communications
• Suitable for power measurements on both laser and LED based
single-mode and multimode fiber optic systems.
• Easy to use; three buttons control all essential functions.
• Multi-wavelength reference stores and recalls reference power levels
for faster, more efficient measurement.
• Rubber boot protects against dropping.
• Rugged and splashproof.
• 850nm, 1300nm, 1310nm and 1550nm calibration wavelengths.
• InGaAs detector.
• +3 to -60dBm measurement range.
• 0.01dB measurement resolution.
• Relative logarithmic dB and absolute logarithmic dBm units.
• User-selectable auto shutoff.
• Two AA batteries provide power for over 100 hours.
• Optional AC power converter/adapter is available for prolonged
or benchtop use.
Requires one Snap-On Connector (SOC) interface (See pages 329 and 330). Compatible with both PC and APC connectors.
Ge MT-RJ Optical Power Meter
321
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Requires one T13A2 for MT-RJ Snap-On Connector (SOC) adapter (See page 330).
Compatible with both PC and APC connectors.
CANADA
Ge MT-RJ Optical Power Meter
AC/Main Power Converter 120V (one required per handheld unit)
USA
Description
60552
60686
Tel: +1.815.397.7070
Fax: +1.815.397.9247
UPC No.
556MT
90ACK
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Pair with an LED source to test insertion loss of multimode MT-RJ fiber
optic cables and connectors or use independently to perform link loss
testing of installed cable plants.
• Easy to use; three buttons control all essential functions.
• Multi-wavelength reference storage capability permits convenient
insertion and link loss testing at different transmission windows.
• Wide area detector allows for testing of each channel individually,
simultaneously or alternating between the two channels.
• Rubber boot protects against dropping.
• Rugged and splashproof.
• 850nm, 1300nm and 1550nm NIST traceable calibration wavelengths.
• Special extra-large area germanium detector.
• +3 to -40dBm measurement range.
• -0.01dB measurement resolution.
• Relative logarithmic dB and absolute logarithmic dBm units.
• User-selectable auto shutoff.
• Two AA batteries provide power for over 100 hours.
• Optional AC power converter/adapter is available for prolonged or
benchtop use.
MADE FOR THE TRADE!™
Communications
Silicon Optical Power Meter
• Optimized for power measurements on fiber optic systems based
on single-mode, multimode, plastic or large core glass optical fibers
and using near-infrared or visible light sources.
• Easy to use; three buttons control all essential functions.
• Multi-wavelength reference stores and recalls reference power
levels for faster, more efficient measurement.
• Rubber boot protects against dropping.
• Rugged and splashproof.
• 635nm, 780nm and 850nm calibration wavelengths.
• 3 x 3.5 mm Silicon detector.
• +3 to -60dBm measurement range.
• 0.01dB measurement resolution.
• Relative logarithmic dB and absolute logarithmic dBm units.
• User-selectable auto shutoff.
• Two AA batteries provide power for over 100 hours.
• Optional AC power converter/adapter is available for prolonged
or benchtop use.
Cat. No.
UPC No.
Description
557B
90ACK
60553
60686
Silicon Optical Power Meter
AC/Main Power Converter 120V
(one required per handheld unit)
Requires one Snap-On Connector (SOC) interface (See pages 329 and 330). Compatible with both PC and APC connectors.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
High Intensity InGaAs Optical Power Meter
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
To accommodate other connector types, see
our SOC/UCI adapters on pages 329 and 330
and reference cables on page 333.
322
• Suitable for power measurements on high power single-mode and DWDM
fiber optic systems.
• Easy to use; three buttons control all essential functions.
• Multi-wavelength reference stores and recalls reference power levels
for faster, more efficient measurement.
• Rubber boot protects against dropping.
• Rugged and splashproof.
• 980nm, 1310nm and 1550nm calibration wavelengths.
• +25 to -30dBm measurement range at 1310/1550nm.
• 0.01dB measurement resolution.
• Relative logarithmic dB and absolute logarithmic dBm units.
• User-selectable auto shutoff.
• Two AA batteries provide power for over 100 hours.
• Optional AC power converter/adapter is available for prolonged
or benchtop use.
Cat. No.
UPC No.
Description
558B
90ACK
60568
60686
High Intensity InGaAs Optical Power Meter
AC/Main Power Converter 120V (one required per handheld unit)
Requires one Snap-On Connector (SOC) interface (See pages 329 and 330). Compatible with both PC and APC connectors.
www.greenlee.com
Fault Locators and Light Detectors
model
type
wavelength (nm)
distance
life / battery type
optical interface
TYPE
170XL
263LX
263MT
510 LS SensoLITE®
Visible Laser
Visible Laser
Visible Laser
Light Detector (Ge)
630 to 1600nm
635nm (red)
635nm (red)
635nm (red)
Up to 5 km (very bright)
Up to 3 km (very bright)
Up to 1 km (bright)
48 hours (2 AA)
40 hours (2 AA)
24 hours (2 AA)
2.5 mm
Fixed FC-PC Interface
Fixed MT-RJ Interface
Universal Interface
✔
170XL
✔
✔
✔
263LX
263MT
✔
510LS
Communications
Single-mode
Multimode
1 year (2 AA)
Universal Interface
FC-PC and MT-RJ Visual Fault Finders
60538
60539
60686
Visual Fault Finder
MT-RJ Visual Fault Finder
AC/Main Power Converter 120V (one required per handheld unit)
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
323
= new product
CANADA
263LX
263MT
90ACK
USA
UPC No. Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Used to quickly locate bending loss and breaks in optical fibers,
and to identify bad connectors.
• 635nm red laser makes fiber breaks and bending losses easily visible.
• Stable, calibrated output.
• Continuous wave output mode for steady fault illumination.
• Blinking output mode increases viewing contrast.
• Optional AC power converter/adapter is available for prolonged
or benchtop use.
• Proven, reliable and compact design.
• Economically priced.
• Rugged and splashproof.
• 263LX model includes fixed FC-PC interface, for use with optional
FoPro® Adapter Cable or user-supplied hybrid cable (See page 333).
• 263MT model is designed for MT-RJ duplex connectors to test both
fibers simultaneously.
• LX model has a range up to 3 km. MT model has a range up to 1 km.
• More than 40 hours of continuous operation.
MADE FOR THE TRADE!™
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Communications
SensoLITE® Visible/Invisible Light Detector
324
• Identifies live multimode and single-mode fibers.
• Helps prevent accidental eye exposure to hazardous laser radiation.
• Simple one-button test.
• Patented light baffle accepts all standard fiber optic connector types,
bare fiber and even fiber loop.
• Includes both audible and visible indicators.
• Unique design permits testing in bright light conditions.
• Wide sensitivity from +25dBm to -55dBm.
• Detects visible and invisible light wavelengths from 630nm to 1600nm.
• Operates for approximately one year on two AA batteries.
• Automatic battery check.
Cat. No.
UPC No.
Description
510LS
60566
SensoLITE® Visible/Invisible Light Detector
Bare Fiber Adapter
• Allows temporary connection of 125 micron multimode or single-mode fiber
to measuring equipment such as Sources, Optical Power Meters and Fault
Locators with an FC-style connector. Connection to other common fiber
optic connector styles can be accomplished with a hybrid test jumper.
• Short 5 mm minimum strip length provides easy insertion into the capillary
and avoids fiber breakage.
• Reusable.
• Includes a durable 2.5 mm tungsten carbide ferrule and a ferrule cleaning tool.
Cat. No.
UPC No.
Description
55456
55456
Bare Fiber Adapter (125µm, FC-style connector)
www.greenlee.com
LED Sources
model
252B
253B
255MT
257MT
Source type
LED
LED
LED
LED
wavelengths (nm)
650
1300
850
SOC Universal
SOC Universal
Fixed MT-RJ
Fixed MT-RJ
Continuous and Modulated
Output Modes
✔
✔
✔
✔
User-selectable Auto Shutoff
✔
✔
✔
✔
Single-mode
✔
✔
Multimode (glass)
✔
✔
Multimode (plastic)
252B
✔
✔
253B
255MT
Communications
850/1300
optical interface type
257MT
Dual Wavelength LED Source
Dual 850/1300nm LED Source
AC/Main Power Converter 120V (one required per handheld unit)
Requires two Snap-On Connector (SOC) adapters (See pages 329 and 330).
325
= new product
= Replacement Part
= Accessory
INTERNATIONAL
60530
60686
CANADA
252B
90ACK
USA
Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Perform multimode insertion loss and link loss measurements
on Local Area Networks (LAN), premises networks and Fiber
Distributed Data Interface (FDDI) installations.
• Stable, calibrated output.
• Proven, reliable and compact design.
• Easy to use; three buttons control all essential functions.
• Rubber boot protects against dropping.
• Rugged and splashproof.
• Single unit combines 850nm and 1300nm calibrated wavelengths.
• Nominal output for 62.5/125 is -13dBm for 850nm and -20dBm
for 1300nm.
• Continuous and modulated output modes.
• User-selectable auto shutoff.
• TIA-568B compliant.
• Two AA batteries provide power for over 24 hours.
• Optional AC power converter/adapter is available for prolonged
or benchtop use.
MADE FOR THE TRADE!™
Single Wavelength 650nm LED Source
Communications
• Performs multimode insertion loss and link loss measurements when
paired with an optical power meter for POF testing.
• Stable, calibrated output.
• Proven, reliable and compact design.
• Easy to use; two buttons control all essential functions.
• Rubber boot protects against dropping.
• Rugged and splashproof.
• Nominal output into 200/230 is -15dBm.
• Continuous and modulated output modes.
• User-selectable auto shutoff.
• Two AA batteries provide power for over 24 hours.
• Optional AC power converter/adapter is available for prolonged
or benchtop use.
Cat. No.
UPC No.
Description
253B
90ACK
60531
60686
650nm LED Source
AC/Main Power Converter 120V (one required per handheld unit)
Requires one Snap-On Connector (SOC) adapter (See pages 329 and 330).
To accommodate other connector
types, see our UCI adapters on pages
329 and 330 and reference cables on
page 333.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Test insertion loss of multimode MT-RJ fiber optic cables and
connectors, or pair with an optical power meter for link loss testing
of installed cable plants.
• Stable, calibrated output.
• Proven, reliable and compact design.
• Easy to use; two buttons control all essential functions.
• Rubber boot protects against dropping.
• Rugged and splashproof.
• 255MT model has a 1300nm wavelength.
• 257MT model has an 850nm wavelength.
• Nominal output for 62.5/125 is -20dBm for both 850nm and 1300nm.
• Continuous and alternating output modes.
• Fixed MT-RJ interface.
• User-selectable auto shutoff.
• Two AA batteries provide power for over 24 hours.
• Optional AC power converter/adapter is available for prolonged
or benchtop use.
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
MT-RJ Dual Channel LED Sources
326
255MT
Cat. No.
UPC No.
Description
255MT
257MT
90ACK
60533
60536
60686
MT-RJ Dual Channel LED Source 1300nm
MT-RJ Dual Channel LED Source 850nm
AC/Main Power Converter 120V (one required per handheld unit)
www.greenlee.com
Laser Sources
model
Source type
wavelengths (nm)
262A
265A
Fabry-Perot Laser
Fabry-Perot Laser
1310
UCI
UCI
Continuous and Modulated
Output Modes
✔
✔
User-selectable Auto Shutoff
✔
✔
Single-mode
✔
✔
262A
265A
Communications
1310/1550
optical interface type
1310/1550 Dual Wavelength Laser Source
262A
90ACK
60564
60686
Dual Laser Source
AC/Main Power Converter 120V (one required per handheld unit)
Requires one UCI adapter (See pages 329 and 330). For PC polished connectors only.
For APC connectors, use hybrid reference cables (See page 333).
327
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
To accommodate other connector types, see
our UCI adapters on pages 329 and 330 and
reference cables on page 333.
CANADA
Description
USA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Performs single-mode insertion loss and link loss measurements when
paired with an optical power meter.
• Single output interface simplifies dual wavelength measurements.
• Stable, calibrated output.
• Proven, reliable and compact design.
• Easy to use; three buttons control all essential functions.
• Rubber boot protects against dropping.
• Rugged and splashproof.
• Single unit toggles between 1310nm and 1550nm wavelengths.
• Fabry-Perot laser diodes.
• Calibrated output power is nominal -7.0dBm.
• Continuous and modulated output modes.
• User-selectable auto shutoff.
• Two AA batteries provide power for over 50 hours.
• Optional AC power converter/adapter is available for prolonged
or benchtop use.
MADE FOR THE TRADE!™
Single Wavelength Laser Sources
Communications
• Performs single-mode insertion loss and link loss measurements
when paired with an optical power meter.
• Stable, calibrated output.
• Proven, reliable and compact design.
• Easy to use; two buttons control all essential functions.
• Rubber boot protects against dropping.
• Rugged and splashproof.
• 265A has a 1310nm wavelength and -7dBm output for single-mode testing.
• Continuous and modulated output modes.
• User-selectable auto shutoff.
• The 265A model operates for over 36 hours on two AA batteries.
• AC power converter/adapter is available for prolonged or benchtop use.
Cat. No.
UPC No.
Description
265A
90ACK
60565
60686
1310nm Laser Source, SM
AC/Main Power Converter 120V
(one required per handheld unit)
Requires one UCI adapter (See pages 329 and 330). For PC polished connectors only.
For APC connectors, use hybrid reference cables (See page 333).
265A
INTERNATIONAL
CANADA
fiberTOOLS® Carrying Cases
Carry Case only
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
To accommodate other connector types,
see our UCI adapters on pages 329 and 330 and
reference cables on page 306.
328
900B
Instruments and accessories
not included
Designed to hold Tempo handheld instruments and a full range
of test accessories.
900B and 901B Hard Carrying Cases
• Top tray holds up to 3 (900B) or 4 (901B) handheld instruments
and a 170XL Visual Fault Finder.
• Bottom compartment of both models stores additional instruments
and test accessories.
• Compact, waterproof and lockable.
• Molded from black structural foam resin.
Cat. No.
UPC No.
Description
900B
901B
60684
60579
Hard Carrying Case, Holds 3 Handhelds
Hard Carrying Case, Holds 4 Handhelds
www.greenlee.com
Fiber Optic Instrument Adapters – SOC and UCI
• Our SOC and UCI adapters provide direct connectivity for
Tempo fiberTOOLS® to a wide range of industry-standard fiber
optic connectors.
• Adapter design ensures maximum accuracy and repeatability
when performing critical measurements on fiber optic systems.
• Easy to clean and use.
• Single-mode and multimode compatible.
• SOC adapters are compatible with both PC and Angled APC
physical contact interfaces.
• UCI adapters feature durable phosphor bronze alignment sleeve.
• SOC (Snap-On Connector) adapter is used on all power meters
and 250 “B” series LED Sources.
• UCI (Universal Connector Interface) adapter is used on all 250/260
“A” Series Sources and 330 Series Variable Optical Attenuators.
Connector Type SOC Adapter
Description
UCI Adapter
Cat. no. upc no. cat. no. upc no.
Blank Adapter (for custom applications)
T1001
60585
N/A
D4
T1089
60597
Use hybrid cable only *
DIN 47256
T1010
60586
AD-108
60697
E-2000
T10E2
60599
AE2-10
60698
EC-Radiall
T10E0
60598
Use hybrid cable only *
FC
T1020
60576
APC-108
60572
HMS-0
T1050
60592
AMS-00
60700
HMS-10/A (SMA-2.5 mm)
T1086
60595
AMT-10
60701
HMS-10/HP
T1040
60590
AHP-10
60699
LC
T10LC
60600
x
FoPro ferrule options include 2.5 mm, 1.57 mm (MIL-style 16AWG optical contacts) and 1.25 mm.
AU-250
60703
Use hybrid cable * or FoPro® x
‑
*
When using a Hybrid Adapter Cable, the instrument UCI adapter and one end of the Hybrid Adapter
Cable should be a commonly available connector type. (i.e. FC, SC or ST)
= new product
= Replacement Part
= Accessory
329
INTERNATIONAL
60587
CANADA
T1025
USA
2.5 mm SOC Quick-Connect Adapter
(E2000, FC, SC, ST, etc.)
Use hybrid cable only *
Tel: +1.815.397.7070
Fax: +1.815.397.9247
60588
Tel: 800.435.0786
Fax: 800.524.2853
T1026
Tel: 800.435.0786
Fax: 800.451.2632
1.25 mm Quick-Connect Universal Adapter
(LC, MU, etc.)
Communications
Fiber Optic Instrument Adapters – SOC and UCI
MADE FOR THE TRADE!™
Fiber Optic Instrument Adapters – SOC and UCI
Connector Type SOC Adapter
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Communications
Description
USA
Tel: 800.435.0786
Fax: 800.451.2632
Cat. no. upc no.
MIL-T-29504/4 & /5 Termini
T1038
60589
Use hybrid cable * or FoPro® x
Mini-BNC
T1047
60591
Use hybrid cable only *
MT-RJ
T13A2
60605
Use hybrid cable only *
T13AF
60606
MU
T10MU
60601
SC
1062
60575
ASC-108
60574
SMA 905/906
T1087
60596
ASM-90
60702
ST
T1030
60577
ATS-108
60573
STRATOS 430/ HOLTEK 38000
T1057
60593
Use hybrid cable only *
TOSLINK – Simplex
T10TB
60602
Use hybrid cable only *
TOSLINK – Duplex (Set of 2)
T10TD
60603
Use hybrid cable only *
Versatile Link – V/Z PIN
T10ZP
60604
Use hybrid cable only *
VFO – Radiall
T1081
60594
Use hybrid cable only *
Æ
MT-RJ Ferrule Only
x
330
UPI-PC Adapter
Cat. no. upc no.
Æ
Æ
Æ
Use hybrid cable only *
Use hybrid cable * or FoPro® x
FoPro ferrule options include 2.5 mm, 1.57 mm
(MIL-style 16AWG optical contacts) and 1.25 mm.
using a Hybrid Adapter Cable, the instrument
* WUCIhenadapter
and one end of the Hybrid Adapter Cable
should be a commonly available connector type.
(i.e. FC, SC or ST)
SOC adapter for use only with the 556MT Optical
ÆPower
Meter on page 321.
90SOC (60687)
SOC adapter tool for easy installation
and removal of SOC adapters from
instrument interfaces.
www.greenlee.com
fiberSAFE™ USA/Canada Telecom Adapter Kit — SOC and UCI
Cat. No.
UPC No.
Description
956US
60695
USA/Canada Adapter Kit
Communications
Conveniently combines the most popular SOC, UCI and bulkhead
mating adapters used in the North American telecommunications market.
Enables direct connectivity for Tempo fiberTOOLS® to industry-standard
fiber optic connectors.
USA/Canada Telecom Adapter Kit includes:
• FC-PC/APC (wide key) bulkhead/mating adapter.
• ST-PC/APC bulkhead/mating adapter.
• SC-PC/APC bulkhead/mating adapter.
• E2000-PC/APC bulkhead/mating adapter.
• FC/SC hybrid bulkhead adapter.
• FC/ST hybrid bulkhead adapter.
• FC/E2000 hybrid bulkhead adapter.
• Universal 2.5 mm Quick Connect SOC adapter.
fiberSAFE™ Worldwide Telecom Adapter Kit — SOC and UCI
UPC No.
Description
956WW
60696
Worldwide Adapter Kit
Description
956LN
60694
LAN Adapter Kit
331
= new product
= Replacement Part
= Accessory
INTERNATIONAL
UPC No.
CANADA
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Conveniently combines the most popular SOC, UCI and bulkhead mating
adapters used for Local Area Networks (LAN). Enables direct connectivity for
Tempo fiberTOOLS to industry-standard fiber optic connectors.
LAN Adapter Kit includes:
• FC-PC/APC (wide key) bulkhead/mating adapter.
• ST-PC/APC bulkhead/mating adapter.
• SC-PC/APC bulkhead/mating adapter.
• SMA 905/906 bulkhead/mating adapter.
• FC/ST hybrid bulkhead adapter.
• ST/SC hybrid bulkhead adapter.
• Universal 2.5 mm Quick Connect SOC Adapter.
Tel: 800.435.0786
Fax: 800.524.2853
fiberSAFE™ LAN Adapter Kit — SOC and UCI
USA
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
Conveniently combines the most popular SOC, UCI and bulkhead mating
adapters used outside the USA and Canada. Enables direct connectivity
for Tempo fiberTOOLS to industry-standard fiber optic connectors.
Worldwide Telecom Adapter Kit includes:
• DIN 47256-PC/APC bulkhead/mating adapter.
• FC-PC/APC (wide key) bulkhead/mating adapter.
• SC-PC/APC bulkhead/mating adapter.
• E2000-PC/APC bulkhead/mating adapter.
• FC/DIN hybrid bulkhead adapter.
• FC/SC hybrid bulkhead adapter.
• FC/E2000 hybrid bulkhead adapter.
• Universal 2.5 mm Quick Connect SOC adapter.
MADE FOR THE TRADE!™
Quick Reference Charts for Fiber Testing Applications
Fiber optics measurements matrix
Communications
application
single-mode page no.
multimode (glass fiber) page no.
Visual Fault Location
263LX
323
263LX
323
170XL
312
170XL
312
Visual Continuity
263LX
170XL
323
312
263LX
170XL
323
312
Measure Optical Power
(to +3dBm)
(to +27dBm)
522B / 555B
522B-HP / 558B
560XL
320, 321
522B / 555B / 557B
320, 322
310
560XL
Measure Insertion Loss / Attenuation
(Dual Wavelength)
262A + 555B
523B-13/15
560XL +580XL
327, 321
317
310, 311
Data Storage Capability
522B / 522B-HP
523B-13/15
320
317
320,321, 322
310
252B + 555B
325, 321
560XL +570XL
310, 311
522B / 522B-HP
320
special test equipment for mt-rj interconnections
application
single-mode page no.
multimode (glass fiber) page no.
Visual Fault Location
263MT
323
263MT
323
Visual Continuity
263MT
323
263MT
323
Measure Optical Power
556MT
321
556MT
321
255MT / 257MT + 556MT
60576MT / 60556MT
326, 321
319
Measure Insertion Loss
262A + 556MT
327, 321
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
special test equipment for plastic optical fiber (POF)
332
application
multimode (1 mm POF) page no.
Visual Fault Location
253B
326
Visual Continuity
253B
326
Measure Optical Power
557B
322
Measure Insertion Loss
253B + 557B
326, 322
www.greenlee.com
TIA-568B and FOTP-171A Certified Reference Cables
Ensures accurate measurements for repeatable and reproducible testing to
the latest industry standards.
Meets and/or exceeds the latest industry standards including:
• TIA/EIA-455-171 (FOTP-171A), issued June, 2001.
• TIA-568B, TIA-562-7 (OFSTP-7) and TIA-526-14 (OFSTP-14) for optical
link testing.
• TIA-455-171 (FOTP-171, Attenuation) and TIA-455-8 (FOTP-8,
Return Loss) for cable assembly testing.
• Corresponding IEC measurement standards.
Ferrule OD
Fiber to Ferrule
Eccentricity
Insertion Loss
Return Loss
Beam Exit Angle
Standard Length
572J
2.4990 ±0.0005 mm
< 0.25µm (SM) and < 3µm (MM)
< 0.15dB (SM, 1310/1550nm) and < 0.25dB (MM, 850/1300nm)
> 55dB (SM, 1310/1550nm) and > 40dB (MM, 850/1300nm)
< 0.25° (SM) and < 0.5° (MM)
3m
Communications
SPECIFICATIONS
Standard Reference Cables (Type A to Type B)
Description
Single-mode Reference Cables:
FC-PC to FC-PC
Cat No.
UPC No.
60658
Description
Cat No.
UPC No.
Multimode Reference Cables:
50/125
FC-PC to FC-PC
562K-105
60659
Cat No. UPC No.
62.5/125
562K-106 60660
562K-101
ST-PC to ST-PC
563K-101
SC-PC to SC-PC
566K-101
60661
ST-PC to ST-PC
563K-105
60662
563K-106
60663
60664
SC-PC to SC-PC
566K-105
60665
566K-106
E2000-PC to E2000-PC
60666
56E2-101
60667
E2000-PC to E2000-PC
56E2-105
60668
56E2-106
60669
LC-PC to LC-PC
56LC-LSM
60670
LC-PC to LC-PC
56LC-LM5
60671
56LC-LM6
60672
MU-PC to MU-PC
56MU-LFM
60676
MU-PC to MU-PC
56MU-LM5
60674
56MU-LM6
60675
Description
Multimode Reference Cables:
Cat No.
UPC No.
50/125
Cat No.
UPC No.
62.5/125
572J-101
60680
FC-PC to SC-APC
576J-101
60681
FC-PC to E2000-APC
57E8-101
60682
FC-PC to LC-PC
57LC-LSM
60733
FC-PC to LC-PC
57LC-LM5
60734
57LC-LM6
60735
FC-PC to MU-PC
57MU-LFM
60736
FC-PC to MU-PC
57MU-LM5
60737
57MU-LM6
60738
262A
333
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
To measure attenuation of SM links with APC polished connectors, use
our 262A Dual Wavelength Laser Source (see page 327) with the APC108 FC UCI Adapter (see page 329) and a Hybrid Reference Cable. Use
same hybrid reference cable approach for LC-PC and MO-PC connectors.
CANADA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Cat No.
USA
Description
Single-mode Reference Cables:
FC-PC to FC-APC
Tel: 800.435.0786
Fax: 800.451.2632
Hybrid Reference Cables (FC-PC to Type A)
MADE FOR THE TRADE!™
BURIED FACILITY LOCATION AND MARKING
Communications
Tracker II
HS-1 (08695)
Optional headset is available
for use in high-traffic areas or
other noisy environments.
CAT. No.
UPC No.
Description
501
501T
501R
IC1
CS16
500CA
08662
60353
60352
60354
60355
60351
Tracker II
Transmitter
Receiver
Inductive Clamp
Transmitter Cord Set
Case with Antenna
• Traces the path and determines the depth of wires and metallic pipes on active
or dead systems without having to deactivate the system.
• Lightweight receiver provides audible and visual indications of signal strength.
• Transmitter output and receiver sensitivity are fully adjustable for maximum accuracy.
• Transmitter offers three methods of connection: direct, inductive coupler and
inductive antenna.
• Includes transmitter assembly, receiver assembly, inductive coupler (clamp),
built-in inductive antenna, two 8' (2.4 m) test leads with heavy-duty alligator clips
and durable polyethylene case.
• High frequency transmitter provides range up to 4,000' (1,219 m) and depths up to
7' (2 m).
• Receiver is 32" long (813 mm).
• Battery operated (eight AA and one 9V battery is included).
• Molded carrying case included.
SPECIFICATIONS
Power Requirements
Battery Life
Transmitter Frequency
Transmitter Power
Voltage Protection
Automatic Shut Off
Construction
Dimensions
Weight
Transmitter – (8) AA batteries; Receiver – (1) 9V battery
Transmitter – 30 hours nominal; Receiver – 10 hours nominal
447.5kHz
40Vp-p (140mW) maximum
240VAC/500VDC
90 Min. Transmitter and Receiver
Transmitter/Receiver – powder coated aluminum
Case – vacuum formed polyethylene
Transmitter – 4.25" x 3" x 3.25" (108 x 76.2 x 82.6 mm)
Receiver – 32" x 2.75" x 4" (812.8 x 69.9 x 101.6 mm)
Case – 33.5" x 8.25" x 3.75" (850.9 x 209.6 x 95.3 mm)
6.7 lbs. complete kit (3.04 kg)
•
•
•
•
•
•
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Buried Line Locator
334
•
•
•
•
LED and LCD signal strength indicators make it quick and easy to find exact line location.
Lightweight and ergonomically balanced.
Automatic signal boost makes it easy to trace lines, even those with very weak signals.
Receiver may be used in active or passive mode.
Receiver locates multiple passive frequencies with a single setting.
Receiver automatically locks out passive range when it detects a transmitter signal,
reducing the chance of tracing other lines carrying weaker signals.
Microprocessor-based circuitry delivers increased accuracy and features auto-gain
control in all environments.
Traces 20' (6 m) underground and provides depth readings up to 15' (4.57 m).
Transmitter can be connected to live lines up to 600V.
Molded carrying case included.
Specifications
Transmitter
Cat. No.
UPC No.
Description
BLL-200
07796
Buried Line Locator
Operating Voltage
Current
Receiver
0-600VAC,
0-300 VDC
13mA (open line)
150mA (live or shorted line)
Frequency
33.3kHz
Depth Range Measures:
0-15 ft.
Traces:
0-20 ft.
±(10% reading + 0.2 ft.)
Depth Resolution ‑ 0.1 ft. increments
Passive Trace Frequency ‑ 12Hz-24kHz
Operating Temperature 0°F to 120°F
(-17°C to 50°C)
Size
7.5" x 4" x 2.1"
(190.5 mm x 101.6 mm x 53 mm)
Operating Temperature ‑ 0°F to 120°F
Power
Power
6 VDC (4 AA batteries)
Weight
1 lb. 12 oz. (794 g)
6 VDC (4 AA batteries)
Weight
15 oz. (425 g)
(with batteries and clamp)
(-17°C to 50°C)
Size 4.1" x 8.5" x 38" (104.1 mm x
215.9 mm x 965.2 mm)
www.greenlee.com
Pulser Fault Locator
PE2003
Great complement to any
buried line cable locator.
SPECIFICATIONS
Power Requirements
CAT. No.
UPC No.
Description
PE2003
2000H
2000R
AF2
CH1
CH2
08666
60357
60358
60482
60360
60361
Pulser
Transmitter (Includes CH1 & CH2)
Receiver
A-Frame
AC Charger
DC Charger
Battery Life
Transmitter Power
Voltage Protection
Construction
Dimensions
Weight
Transmitter: (1) 12V rechargeable battery
Receiver: (1) 9V battery
Transmitter: 23 hours per charge; Receiver: 200 hours
2400VDC peak
240VAC/400VDC
Transmitter – aluminum housing in polyethylene case
Receiver – powder coated aluminum
Transmitter – 17" x 8.5" x 6.5" (421 mm x 215 mm x
160 mm) in case
Receiver – 33.5" x 21.75" x 3.25" (840 mm x 550 mm x
8 mm) on A-Frame
12.5 lbs. (5.7 kg) complete
Communications
• Identifies the exact location of even the smallest breaks in insulation
by “pulsing” a high-voltage signal that radiates into the earth at the location
of the faults. With the A-frame mounted receiver, a visual analog meter
points the way to the source of the voltage.
• Multiple faults on a single wire can be identified indicating the need
to replace instead of repair.
• Extra-long test leads feature heavy-duty alligator clips for use on multiple
cable types.
• Includes a rechargeable transmitter, receiver, A-frame, ground stake,
120V charger and a 12V DC (cigarette lighter) adapter.
• Battery operated (one 12V and one 9V battery are included).
• Molded carrying case included.
Wire Finder/Mini Locator
08678
60363
60364
60366
60367
Wire Finder/Mini Locator
Transmitter
Receiver
Alligator Clip Cord set
AC Outlet Cord set
Dimensions
Weight
335
= new product
= Replacement Part
= Accessory
INTERNATIONAL
508S
508ST
508SR
CS14
CS15
CANADA
Description
USA
UPC. No
(1) 9V each (transmitter and receiver, included)
Transmitter 35 hours nominal; Receiver 20 hours nominal
447.5kHz
9Vp-p (11mW)
240VAC/500VDC
Transmitter/Receiver – high-impact ABS plastic,
Case – vacuum-formed polyethylene
Transmitter – 4" x 2.3" x 1" (101.6 x 58.4 x 25.4 mm),
Receiver – 6" x 2.35" x 1" (152.4 x 59.7 x 25.4 mm),
Case – 9.5" x 8" x 3"(241.3 x 203.2 x 76.2 mm)
2.6 lbs. (1.2 kg)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
CAT. No.
Power Requirements
Battery Life
Transmitter Frequency
Transmitter Power
Voltage Protection
Construction
Tel: 800.435.0786
Fax: 800.524.2853
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.451.2632
• Traces energized or degenerated wires in walls and drop ceilings.
• Provides reliable results on buried cables to depths of 3' (1 m)
and lengths up to 1000' (308 m).
• Determines the approximate depth of the wire before digging.
• Compact design and easy-to-understand operations.
• Fully adjustable transmitter and receiver for accurate locating.
• Quick change test leads for use in any industry, even international power outlets.
• Voltage protection to allow use on live AC circuits.
• Automatic shut-off to prevent accidental battery discharge.
• Housed in a durable, molded carrying case with a quick reference operation
guide on the inside of the lid.
• Battery-operated: (2) 9V batteries included.
MADE FOR THE TRADE!™
Communications
Wire and Valve Locator
• Adjustable transmit power allows you to select the best signal for maximum
performance.
• Transmitter’s high power output offers extended range and use on higher
resistance wire paths that other locators can’t touch.
• Receiver provides both audible and visual indications of signal strength.
• Lightweight receiver wand makes it easy for you to move along quickly
to locate even the longest wire path.
• Rugged headphones block ambient noise and improve “feel” for the signal.
• Includes transmitter, receiver, headset, ground stake, and complete instructions.
• Battery-operated: (8) “D” Cells and (1) 9V.
SPECIFICATIONS
Power Requirements
Transmitter: (8) “D” Cell;
Receiver: (1) 9V battery
Transmitter: 50 hours nominal
Receiver: 100 hours nominal
1748Hz
750Vp-p 285Vrms
120VAC/250VDC
Powder-coated aluminum housing in polyethylene case
33.5" x 8.25" x 3.75"
12 lbs. complete
Battery Life
CAT. No.
UPC No.
Description
521A
521T
521R
HS1
GS1
86788
60368
60352
08695
60362
Wire and Valve Locator
Transmitter
Receiver
Headset
Ground Stake
Transmitter Frequency
Transmitter Power
Voltage Protection
Construction
Case Dimensions
Weight
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Marker-Mate®
336
• Designed to locate buried electronic markers, including Omni Marker®,
and Uni Marker™
• Five+ foot depth range
• Detects up to seven different marker types
• Scan mode provides simultaneous detection of all marker types
• User-adjustable Detection Threshold
• Digital signal processor accuracy
• Large-character display is easy to read
• Bar graph, numeric & audible signal strength indicators
• Speaker volume adjust
• Headphone jack
• Battery level indicator
• Low battery warning
• Adjustable time out feature prolongs battery life (and can be turned off)
• Weather resistant
• Rugged construction
Cat. No.
UPC No.
Description
EML100
60798
Marker-Mate Electronic Marker Locator
SPECIFICATIONS
Electrical:
Environment:
Operating Temperature:
Storage Temperature:
Weather Resistant
Physical:
Length:
Width
Height:
Weight:
Twelve AA batteries
Battery Life: 20 hours typical
-4°F to 122°F (-20°C to 50°C)
-40°F to 158°F (-40°C to 70°C)
30.7 in. (780 mm)
7.8 in. (198 mm)
12.8 in. (325 mm)
4.5 lbs. with batteries (2 kg)
www.greenlee.com
Omni Marker®
Application
Power
Color
Red
Frequency
169.8kHz
Cat no.
0160-0001-1
UPC No.
60765
Water
Blue
145.7kHz
0161-0001-1
60766
Sanitary
Green
121.6kHz
0162-0001-1
60767
Telephone
Orange
101.4kHz
0163-0001-1
60768
Gas
Yellow
83.0kHz
0164-0001-1
60769
Cable TV
Orange/Black
77.0kHz
0165-0001-1
60770
66.35kHz
0168-0001-1
11050
Non-Potable Water Purple
Communications
• Electronically marks and relocates buried facilities.
• Unique design produces a uniform, spherical RF field in every direction.
• Easily located up to 5' away with any modern marker locator.
• Wider field with a signal peak directly above the marker provides
precise location.
• Requires no particular orientation when buried.
• Greater range than standard 4" ball markers.
• High-reliability design lasts as long as your buried plant.
• Color coded by utility application.
• Patented.
Uni Marker™
Cat no.
0170-0001-1
UPC No.
60771
Water
Blue
145.7kHz
0171-0001-1
60772
Sanitary
Green
121.6kHz
0172-0001-1
60773
Telephone
Orange
101.4kHz
0173-0001-1
60774
Gas
Yellow
83.0kHz
0174-0001-1
60775
Cable TV
Orange/Black
77.0kHz
0175-0001-1
60776
66.35kHz
0178-0001-1
11059
Non-Potable/Gen I Purple
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
337
= new product
CANADA
Frequency
169.8kHz
USA
Color
Red
Tel: 800.435.0786
Fax: 800.524.2853
Application
Power
Tel: 800.435.0786
Fax: 800.451.2632
• Electronically marks buried facilities for later relocation.
• Rugged polyethylene case ensures years of useful life.
• Small size and flat design attach easily to non-metallic utility box lids,
hand holes and other buried enclosures.
• Location is simple with any modern marker locator.
• Range is 25% more than other similar-style markers.
• Signal peak ensures location within inches of the marker.
• Color coded by utility application.
MADE FOR THE TRADE!™
COMMUNICATIONS KITS
GripPack Quick-Release Tool Holster
Communications
• Easy-on, easy off with new quick-release belt clip.
• Belt clip swivels so the holster moves with you and the
tools stay out of your way.
• Form fitted PVC material ensures that tools don’t fall out -
even if you drop your kit or they are upside down.
• Molded specifically to hold the following Paladin Tools: Data SureStrip®
UTP/STP & flat satin phone cutter/stripper, Datacomm scissors with
serrated blades & ergonomic handles, Punchdown tool - either the
ergonomic SurePunch® Pro or the original SurePunch® PDT, MiniMagLite® or SurePunch® Pro detachable LED, and a Sharpie® marker.
Cat. No.
Description
PA4940
PA4941
PA4942
PA4943
PA4945
PA4946
GripPack Quick-Release Tool Holster
GripPack SurePunch® Pro Technician's Kit
GripPack SurePunch® Pro Installer's Kit
GripPack SurePunch® Technician's Kit
PowerPlay GripPack
GripPack UTP Essentials
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
Dimensions
8.25” H x 2.8” W x 3.43” D
210mm H x 72mm W x 87mm D
Weight
PA4940
15 oz. (428 g)
PA4941
30.4 oz. (862 g)
PA4942
27.2 oz. (771 g)
PA4943
31.2 oz. (885 g)
PA4945
20.8 oz. (590 g)
PA4946
20.8 oz. (590 g)
338
Grip Pack Kits
PA4945
Description
GripPack Tool Holster
Model
PA4941
PA4942
PA4943
PA4940
✓
✓
✓
PA4945
PA4946
✓
✓
Data SureStrip UTP/STP & flat satin cutter/stripper
PA1116
✓
✓
✓
Datacomm scissors
PA1931
✓
✓
✓
✓
✓
✓
✓
®
✓
Reversible 110/66 blade
PA4571
✓
✓
SurePunch® Pro PDT punchdown tool handle
PA3589
✓
✓
SurePunch® PDT punchdown tool handle
PA3570
SurePunch® Pro detachable LED light & batteries
PA4599
✓
✓
MagLite® with 2 AA batteries
N/A
✓
✓
✓
Black Sharpie® pen
N/A
✓
✓
✓
PowerPlay™ PT-540
PA6520
✓
www.greenlee.com
Ultimate Technician Kit
PA4932 Ultimate Technician Kit Includes
Description
PA4932
Ultimate Technician Kit
SPECIFICATIONS
Dimensions
11” W x 8.5” L x 6” D
279 mm W x 216 mm L x 152 mm D
7.2 lbs. (3.3 Kg)
Weight
KT8 round cable cutter
Data SureStrip® UTP/STP & flat satin cutter/stripper
LC-CST CATV “F” coax stripper
Untwist tool
CATV “F” flaring & attachment tool - RG6/RG6 QS
SealTite® Pro compression crimper
All-in-One Phone/Data tool
SurePunch® Pro punchdown tool
SurePunch® Pro detachable LED light
110 blade
Double 110 blade
66 blade
BIX blade
Krone LSA blade
LAN ProNavigator® tester & remote
Telephone Test Set & LAN Cable-Check™
RJ45 adapter
Can wrench
(10) RJ22 handset plugs
(10) RJ11/12 plugs, stranded, flat cable
(10) RJ45 plugs, Cat5e, solid, round cable
(10) CATV “F” RG6/RG6 QS connectors
(2) BNC-to-CATV “F” adapters
Ultimate Tool Bag
Plano® plastic tackle box
Communications
Cat. No.
PA900265
PA1116
PA1257
PA1923
PA1927
PA1555
PA1556
PA3589
PA4599
PA4572
PA4591
PA4573
PA4574
PA4575
PA1543
PA1573
PA1902
PA1900
N/A
PA9520
PA9546
PA9644
PA901074
PA4923
N/A
Ultimate Premise Service Kit
Ultimate Premise Service Kit
SPECIFICATIONS
Dimensions
Weight
= new product
11” W x 8.5” L x 6” D
279 mm W x 216 mm L x 152 mm D
6.1 lbs. (2.8 Kg)
339
= Replacement Part
= Accessory
INTERNATIONAL
PA4933
CANADA
Description
Die Sets: RJ11/12 WE/SS-style
Die Sets: RJ45 WE/SS-style & RG6/RG6 QS CATV “F”
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
KT8 round cable cutter
Data SureStrip® UTP/STP & flat satin cutter/stripper
LC-CST CATV “F” coax stripper
CrimpALL® crimp frame with EZI-CHANGE™ thumb screws
SurePunch® Pro punchdown tool
110 blade
66 blade
LAN ProNavigator® tester & remote
Telephone Test Set & LAN Cable-Check™
RJ45 adapter
(2) BNC-to-CATV “F” adapters
Ultimate Tool Bag
Plano® plastic tackle box
Tel: 800.435.0786
Fax: 800.524.2853
PA900265
PA1116
PA1257
PA8000
PA3589
PA4572
PA4573
PA1543
PA1573
PA1902
PA901074
PA4923
N/A
Die Sets:
PA2062
PA2687
USA
PA4932 Ultimate Premise Service Kit Includes
Tel: 800.435.0786
Fax: 800.451.2632
This kit is designed for today’s on-the-go LAN professional. It provides
all the tools and testers you need to maintain your data, voice and video
networks all in our Ultimate Tool Bag that’s always ready.
MADE FOR THE TRADE!™
Ultimate Coax Compression Tool Kit
This kit is for installing home theaters, HDTV, satellite and digital cable
TV systems. It contains everything needed for new home construction
or retrofitting sophisticated A/V solutions.
Communications
PA4939 Ultimate COAX compression tool pro Kit Includes
Cat. No.
Description
PA4939
Ultimate Coax Compression Tool Kit
SPECIFICATIONS
PA1821
PA900265
PA1119
PA1280
PA2280
PA2281
PA2282
PA2283
PA2284
PA1927
PA1555
PA1907
PA1908
PA1594
N/A
PA4923
PA9645
PA9720
PA9730
PA906002
AM 35 Slitter
KT8 Cutter
UTP/Coax Cutter/Stripper
CST Pro Coax tool
CST Pro GRN Cassette
CST Pro OG – Kings & Amphenol BNC
CST Pro BK – ADC, Amphenol HDTV BNC
CST Pro BL – CATV “F”
CST Pro Rollers
CATV “F” Flaring & Insertion Tool
SealTite® Pro Compression Crimper
BNC Extraction Tool
CATV “F” Extraction Tool
LAN & A/V Cable-Check™ Tester
Plano® Tackle Box
Ultimate Tool Bag
(50) SealTite™ CATV “F” – RG59
(10) SealTite™ RCA – RGX
(10) SealTite™ BNC – RGX
(30) Connector & Adapter Assortment Pack
11” W x 8.5” L x 6” D
279 mm W x 216 mm L x 152 mm D
8.25 lbs. (3.7 Kg)
Dimensions
Weight
Tel: +1.815.397.7070
Fax: +1.815.397.9247
If you’re an installer or technician needing a data cable tool kit solution,
this is it. It includes all the tools you need for Cat5, Cat5e and Cat6
installation or maintenance in our rugged Ultimate Tool Bag.
PA4932 Ultimate Dataready® pro Kit Includes
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Ultimate DataReady® Pro Kit
Cat. No.
Description
PA4934
Ultimate DataReady® Pro Kit
SPECIFICATIONS
Dimensions
340
Weight
11” W x 8.5” L x 6” D
279 mm W x 216 mm L x 152 mm D
5.15 lbs. (2.3 Kg)
PA1116
PA1923
PA8000
PA3589
PA4599
PA4571
PA4591
PA1543
PA4923
N/A
Die Sets:
PA2061
PA2062
PA2063
PA2064
PA2067
Data SureStrip® UTP/STP & flat satin cutter/stripper
Untwist tool
CrimpALL® crimp frame with EZI-CHANGE™ thumb screws
SurePunch® Pro punchdown tool
SurePunch® Pro detachable LED light
110/ 66 blade
Double 110 blade
LAN ProNavigator® tester & remote
Ultimate Tool Bag
Plano® plastic tackle box
RJ45 WE/SS-style
RJ11/12 WE/SS-style
RJ22 handset
RJ45 AMP-style
RJ11 DEC-MMJ
www.greenlee.com
Ultimate Data/Voice Pro Kit
This complete kit is for data and voice installation and maintenance
stored in the new versatile Ultimate Tool Bag.
PA4935 Ultimate Data/Voice Pro Kit Includes
Cat. No.
Description
PA4935
Ultimate Data/Voice Pro Kit
Data SureStrip® UTP/STP & flat satin cutter/stripper
Untwist tool
All-in-One Phone/Data tool
SurePunch® Pro punchdown tool
110 blade
66 blade
Double 110 blade
Telephone Test Set & LAN Cable-Check™
Can wrench
Ultimate Tool Bag
Plano® plastic tackle box
Communications
PA1116
PA1923
PA1556
PA3589
PA4572
PA4573
PA4591
PA1573
PA1900
PA4923
N/A
SPECIFICATIONS
Dimensions
Weight
11” W x 8.5” L x 6” D
279 mm W x 216 mm L x 152 mm D
4.5 lbs. (2.0 Kg)
Ultimate Tool Bag
Ultimate Tool Bag with Plano® tackle box
341
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Tools and bits not included
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
Dimensions
Main Bag (closed)
11" H x 8.5" W x 6" D
279.4mm H x 215.9mm W x 152.4mm D
Inner Tote (closed)
6" H x 6" W x 4.35" D
152.4mm H x 152.4mm W x 110.5mm D
Weight
2.20 lbs. (1 Kg)
CANADA
PA4923
USA
Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Main compartment features removable inner tote and 3
additional pockets.
• Removable inner tote with 8 adjustable storage slots keeps
smaller tools handy.
• Detachable shoulder strap with 3 anchor points to carry bag horizontally
or vertically.
• Deep Velcro pockets holds large tools or test equipment.
• Plano® divided tackle box neatly stores dies, blades & connectors.
Fits into all outer pockets.
• Sturdy bottom prevents bag from flopping over when sitting upright.
MADE FOR THE TRADE!™
SealTite® Pro A/V Kit
The new SealTite® Pro A/V kit is all you need to make custom-length
digital and analog audio and component video cables using compression
RCA, BNC and cable TV "F" connectors.
Cat. No.
Description
PA4915
SealTite® Pro A/V Kit
SPECIFICATIONS
Communications
Dimensions
Weight
9.86” W x 9.25” L x 1.52” D
250 mm W x 235 mm L x 39 mm D
46 oz. (1.03 Kg)
Sealtite® PRO A/V Kit IncludeS
Combination UTP/Coax Data SureStrip
PA1119
SealTite Pro Compression Crimper
PA1555
2 sets of color bands for RCA & BNC Connectors
N/A
6 BONUS RG6/RG6 QS Compression Connectors
(2) RCA
PA9714
(2) BNC
PA9715
(2) Cable TV “F”
PA9643
SealTite® Pro Cable TV "F" Kit
Tackle all of your compression crimping jobs with the complete SealTite®
Pro Kit. Includes all the tools you need to prepare the cable and
terminate any compression connector using RG59, RG6 or RG6 Quad
shield cables.
Cat. No.
Description
PA4910
SealTite® Pro Kit
SPECIFICATIONS
Dimensions
CANADA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Sealtite® Pro Kit Includes
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
Weight
8” W x 4” L x 2” D
203 mm W x 102 mm L x 51 mm D
46 oz. (1.03 Kg)
PA900265
PA1257
PA1917
PA1555
N/A
KT8 round cable cutter
LC CST CATV “F” coax stripper
RG6/RG6 Quad shield flaring tool
SealTite® Pro compression crimper
RG6/RG6 Quad SealTite® connectors (10)
SealTite® Cable TV "F" Compression Tool Kit
This kit is designed for applications requiring weatherproof CATV "F"
connections including satellite dish and CATV installations. The crimper
works with Paladin's connectors as well as Augat/T&B Snap-n-Seal™.
All of the tools are packed in a nylon zipper case.
Cat. No.
Description
PA4906
SealTite® Waterproof Connector Kit
USA
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
342
Dimensions
Weight
11” W x 6” L x 3.5” D
279 mm W x 152 mm L x 89 mm D
2.25 lb. (1.02 Kg)
Sealtite® COMPRESSION TOOL Kit Includes
PA900265
PA1257
PA1927
PA901024
PA9643
N/A
KT8 Cutter
LC CST 2-Level Coax Stripper
CATV "F" Flaring & Insertion Tool
SealTite® Compression Crimper
RG6/6 QS SealTite® CATV "F" connectors (10)
Compact Zipper case
www.greenlee.com
CoaxReady™ Compression Tool Kit
Adding to our CoaxReady solutions, this kit has everything you will need
to terminate any manufacturers' cable TV "F", RCA or BNC compression
connectors using RG6, RG6 Quad or RG59 cable sizes.
• 12 piece kit
• Includes zippered cordura portfolio case
Coaxready™ COMPRESSION TOOL Kit Includes
Description
PA906003
CoaxReady™ Compression Tool Kit
SPECIFICATIONS
Dimensions
Weight
10” H x 7.5” W x 2” D
254 mm W x 191 mm L x 51 mm D
3.5 lbs. (1.6 Kg)
AM 35 Slitter
KT8 Cutter
Data & A/V UTP & Coax Cutter/Stripper
CST Pro Coax tool
CST Pro GRN 3-Level Strip Blade Cartridge
CST Pro OG 3-Level Strip Blade Cartridge
CST Pro BK 3-Level Strip Blade Cartridge
CST Pro Rollers
CATV “F” Flaring & Insertion Tool
SealTite® Pro Compression Crimper
Zippered Cordura® Portfolio Case
CoaxReady™ Deluxe Kit
Communications
Cat. No.
PA1821
PA900265
PA1119
PA1280
PA2280
PA2283
PA2282
PA2284
PA1927
PA1555
N/A
Perfect for LAN/Ethernet or video & CATV installation. For a wide variety
of coaxial connectors including mini-coax and HDTV applications,
CoaxReady™ Deluxe combines our most popular tools for a complete
coax solution in a handy zipper case.
• Kit also includes terminators and adapters
SPECIFICATIONS
Dimensions
Weight
10” H x 7.5” W x 2” D
254 mm W x 191 mm L x 51 mm D
3 lbs. (1370 g)
Description
CoaxReady™ Deluxe Kit
With this kit a technician is set to tackle most coaxial cabling challenges.
Perfect for the LAN/Ethernet or video installation installer. For a
wide variety of coaxial connectors including mini-coax applications,
CoaxReady™ combines our most popular tools with the new LC CST
coax stripper in a handy zippered case.
Coaxready™ Kit Includes
Cat. No.
Description
PA901054
CoaxReady™ Kit
= new product
= Replacement Part
PA900265
PA1255
PA1302
Die sets:
PA2034
PA2075
PA2653
= Accessory
KT8 round cable cutter
LC CST-58/59 coax stripper
1300 crimp tool frame with EZI-CHANGE™ thumb screws
BNC/TNC - RG58/59/62AU
BNC/TNC - RG58/59/62AU RG6 Teflon/Plenum
SMA/SMB/Mini 59 BNC & TNC/Mini-UHF
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Weight
10” H x 7.5” W x 2” D
254 mm W x 191 mm L x 51 mm D
2.5 lbs. (1140 g)
343
INTERNATIONAL
SPECIFICATIONS
Dimensions
CANADA
BNC/TNC - RG58/59/62AU
BNC/TNC - CATV “F” RG59/6/Belden 8281/1694A and 1505A
SMA/SMB/Mini 59 BNC & TNC/Mini-UHF
Tel: 800.435.0786
Fax: 800.524.2853
CoaxReady™ Kit
KT8 round cable cutter
LC CST-58/59 coax stripper
SoHo Cable Check™
1300 crimp tool frame with EZI-CHANGE™ thumb screws
USA
Cat. No.
PA901081
PA900265
PA1255
PA1578
PA1302
Die sets:
PA2034
PA2649
PA2653
Tel: 800.435.0786
Fax: 800.451.2632
Coaxready™ DELUXE Kit Includes
MADE FOR THE TRADE!™
Telco Technician Tool Kit
Cat. No.
Description
PA4938
Telco Technician Kit
SPECIFICATIONS
Dimensions
Weight
10.6” W x 10.4” L x 9.6” D
269 mm W x 264 mm L x 244 mm D
7.6 lbs. (3.45 Kg)
Communications
Broadcastready® pro Kit Includes
PA1116
PA1933
PA3570
PA4571
PA4599
N/A
N/A
PA4940
PA1561
PA9655
PA9654
PA1902
PA1903
PA1573
PA1780
PA6500
N/A
PA4923
Data SureStrip® UTP/STP Cutter/Stripper
Datacomm Scissors
SurePunch® Pro Punchdown Tool
110/66 blade
SurePunch® Pro Detachable LED Light
Mini-MagLite®
Sharpie® Black Marker
GripPack Quick Release PDT Holster
All-in-One Phone/Data Crimp Tool
(50) RJ45 Cat5e Modular Plugs
(50) RJ11 Modular Plugs
RJ45 Adapter
RJ11 Adapter
Tone Probe Plus Cable-Check™
Butt Set
PowerPlay™ PT-510
Plano® Tackle Box
Ultimate Tool Bag
Tel: +1.815.397.7070
Fax: +1.815.397.9247
The BroadcastReady™ Kit includes professional tools for cutting, stripping,
crimping and testing coaxial cable connections for HDTV, video and RF
communications. Protected by a padded, zipper case. Also includes a
screwdriver to change out die sets.
Broadcastready® pro Kit Includes
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
BroadcastReady® Kit
Cat. No.
Description
PA901083
BroadcastReady® Kit
SPECIFICATIONS
Dimensions
Weight
344
10.5” W x 2.75” L x 3.25” D
267 mm W x 197 mm L x 83 mm D
3 lbs. (1.4 Kg)
PA900265
PA1280
PA2280
PA2281
PA2282
N/A
PA1543
PA1600
Die Sets:
PA2003
PA2005
PA2660
PA2661
PA2662
PA2663
KT8 round cable cutter
CST Pro Coax tool
CST Pro GRN – common connectors
CST Pro OG – Kings & Amphenol 3-piece
CST Pro BK – ADC, Amphenol HDTV
Screwdriver to change dies
LAN ProNavigator® tester & remote
1600 Series crimp frame
BNC/TNC RG174 & other small cable
BNC/TNC - RG58/59 & other small cable
BNC/TNC HDTV - Belden 8281 & 7505
BNC/TNC HDTV - RG59, & Belden 1505 & 8241
BNC/TNC HDTV - RG6, Belden 1694A & 1855A
BNC/TNC HDTV – Belden 1694A & 8281 & NT735
www.greenlee.com
DataComm Pro Starter Kit Max with PT-510 PowerPlay Tool
This kit is the perfect solution for the new data installer. It includes all of the
standard tools required for basic jobs and the PowerPlay™ PT-510 multi-tool
for those unexpected needs.
• 17 piece kit
• Includes the complete solution for cutting, crimping, and terminating
• All the tools included come in a compact zipper case
• Includes PT-510 PowerPlay
Description
PA4919
DataComm Pro Starter Kit Max with PT510 PowerPlay Tool
SPECIFICATIONS
Dimensions
Weight
11.2“ W x 6.2” L x 3.6” D
284 mm W x 157 mm L x 91 mm D
2.3 lbs. (1.04 Kg)
DataComm pro starter Kit max Includes
PA1116
PA1931
PA3570
PA4528
PA1561
PA6500
PA9520
N/A
Data SureStrip® UTP/STP Cutter/Stripper
Datacomm Scissors
SurePunch® Pro Punchdown Tool
110 Reversible blade
All-in-One Phone/Data Crimp Tool
PT-510 PowerPlay™ 18-Tools-in-One
(10) RJ45 Cat5e Modular Plugs
Compact Zipper Case
Communications
Cat. No.
PA4908
DataComm Pro Starter Kit
SPECIFICATIONS
Dimensions
Weight
9.8“ W x 4.9” L x 2.7” D
249 mm W x 124 mm L x 69 mm D
1.8 lbs. (0.82 Kg)
Data SureStrip® UTP/STP Cutter/Stripper
Datacomm Scissors
SurePunch® Pro Punchdown Tool
110 Reversible blade
All-in-One Phone/Data Crimp Tool
(10) RJ45 Cat5e Modular Plugs
(50) RJ11 Modular Plugs
Compact Zipper Case
Tel: +1.815.397.7070
Fax: +1.815.397.9247
PA1116
PA1931
PA3570
PA4528
PA1561
PA9520
PA9654
N/A
345
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Datacomm pro starter Kit Includes
CANADA
Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
This kit is also a starter kit for datacomm professionals but excludes the
PowerPlay™ PT-510 to make it even more budget friendly.
• 66 piece kit
• Includes the complete solution for cutting, crimping, and terminating
• All the tools included come in a compact zipper case
USA
DataComm Pro Starter Kit
MADE FOR THE TRADE!™
DataReady™ Pro Kit
A complete data cable installation kit providing everything to support the
installer using commonly-available connectors, and punchdown termination
blocks. All tools contained in a professional-quality, soft-sided zipper case with
heavy-duty wrist strap.
Cat. No.
Description
PA901378
PA9013781
DataReady™ PRO Kit
DataReady™ PRO Kit - Krone*
Communications
SPECIFICATIONS
Dimensions
Weight
10 “W x 7.5” L x 2” D
254 mm W x 191 mm L x 51 mm D
4 lbs. (1.83 Kg)
DataReady™ Pro Kits Include
PA1116
PA1923
PA3589
PA4599
PA4591
PA4571
PA1543
PA8000
Die Sets:
PA2061
PA2062
PA2063
PA2064
PA2067
Data SureStrip® UTP/STP & flat satin cutter/stripper
Untwist Tool
SurePunch® Pro punchdown tool
SurePunch® Pro detachable LED light
Double 110 blade
110/ 66 blade**
LAN ProNavigator® UTP/STP continuity tester & remote
CrimpALL® crimp frame with EZI-CHANGE™ thumb screws
RJ45 WE/SS-style
RJ11/12 WE/SS-style
RJ22 handset
DRJ45 AMP-style
RJ11 DEC-MMJ
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
* Additional 110 blade included in PA9013781 Kit
** Replaced with Krone blade PA4575 (only with PA9013781 Kit)
346
DataReady™ Kit
The complete Category 5 datacomm tool set in a handy zipper case.
Everything needed for a CAT-5 installation except the cable.
Cat. No.
Description
PA901053
PA9010531
DataReady™ Kit
DataReady™ Kit - AMP/Krone*†
SPECIFICATIONS
Dimensions
Weight
10” W x 7.5” L x 2” D
254 mm W x 191 mm L x 51 mm D
3 lbs. (1.4 Kg)
DateReady™ Kits Include
PA1116
PA1556
PA3570
PA4571
PA1576
N/A
N/A
Data SureStrip® UTP/STP & flat satin cutter/stripper
All-in-One Phone/Data tool*
SurePunch® Impact Punchdown Tool
110/ 66 blade**
Data Link/ID and Cable-Check™ Tester
(20) RJ45 plugs, Cat5e, solid/stranded; flat/round cable
Zipper Case with Carrying Strap
* WE/SS - style replaced with AMP - style #1557
* * Contains 110 & Krone blades PA4575 (only with PA9010531 Kit)
www.greenlee.com
Premise Service Kit
Our biggest data, voice, and coaxial LAN installation kit provides everything for
twisted pair and coaxial cable installation. All tools contained in a professional
blow-mold case complete with form-fitting foam.
Cat. No.
Description
PA901039
PA9010391
Premise Service Kit
Premise Service Kit - AMP/Krone*
Dimensions
Weight
17” W x 13.4” L x 4.5” D
432 mm W x 341 mm L x 115 mm D
7.6 lbs. (3.5 Kg)
Premise Service KitS Include
PA900265
PA1257
PA1116
PA8000
PA3589
PA4599
PA4578
PA4573
PA1543
PA1573
PA1902
Die Sets:
PA2062
PA2687
KT8 round cable cutter
LC-CST CATV “F” coax stripper*
Data SureStrip® UTP/STP & flat satin cutter/stripper
CrimpALL® crimp frame with EZI-CHANGE™ thumb screws
SurePunch® Pro punchdown tool
SurePunch® Pro detachable LED light
110 blade
66 blade***
LAN ProNavigator® UTP/STP continuity tester & remote
Telephone Test Set & LAN Cable-Check™
RJ45 8-way adapter
Communications
SPECIFICATIONS
RJ11/12 WE/SS-style**
RJ45 WE/SS-style & RG6/RG6 QS CATV “F”**
* Replaced with LC CST-58/59 coax stripper PA1255
** Replaced with RJ45 AMP-style & RG58/59 BNC/TNC dies PA2034, PA2064, PA2065
*** Replaced with BIX or Krone blade #PA4575 (only with PA9010391 Kit)
PA4929
Basic LAN Tool Kit
SPECIFICATIONS
Dimensions
Weight
7.75 “W x 11” L x 2” D
197 mm W x 280 mm L x 51 mm D
1.85 lbs. (.85 Kg)
Data SureStrip® UTP/STP & flat satin cutter/stripper
All-in-One Phone/Data Crimper
Non-Impact 110 Punchdown Tool
(20) RJ45 plugs, Cat5e, solid/stranded; flat/round cable
Zipper Case with Carrying Strap
347
= new product
= Replacement Part
= Accessory
INTERNATIONAL
PA1116
PA1556
PA3580
N/A
N/A
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Basic lan tool Kit Includes
CANADA
Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
USA
This convenient kit is perfect for small offices or for students just starting out.
It includes esential tools needed to easily maintain your network or to make
quick repairs.
Tel: 800.435.0786
Fax: 800.451.2632
Basic LAN Tool Kit
MADE FOR THE TRADE!™
LAN Pro Starter Kit
Communications
If you are a student looking for a basic datacomm kit, an electrician just
starting out or an IT mManager who needs to occasionally make repairs,
this kit is for you.
• 14 piece kit
• All the tools included come in a compact zipper case
Cat. No.
Description
PA4918
Basic LAN Kit
SPECIFICATIONS
Weight
1.85 lbs. (.85 Kg)
Basic lan Kit Includes
Data SureStrip® UTP/STP & flat satin cutter/stripper
All-in-One Phone/Data Crimper
Non-Impact 110 Punchdown Tool
(10) RJ45 Cat5e modular plugs
Compact Zipper Case
PA1116
PA1556
PA3580
N/A
N/A
Network Tool Bundle
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
This new bundle provides the perfect solution for DIYers that want
to use professional tools or for small contractors just starting out
installing networks. It includes everything you need but the cable to
get the job done.
348
Cat. No.
Description
PA4909
Network Tool Bundle
SPECIFICATIONS
Dimensions
Weight
9.86” H x 9.25” W x 1.52” D
250 mm H x 235 mm W x 38.6 mm D
18.4 oz. (39 g)
PA4909 Network Tool Bundle Includes
PA1116
PA1556
PA3580
PA9546
PA9520
Data SureStrip® UTP/STP & flat satin cutter/stripper
All-in-One Phone & Data Tool
Non-impact 110 punchdown
10, RJ45 Cat5e plugs
10, RJ11 plugs
www.greenlee.com
Computer Service Kit
Cat. No.
Description
PA4370
Computer service kit
SPECIFICATIONS
Dimensions
11" x 11.2" x 2.3"
(279 mm x 285 mm x 59mm)
4.5 lbs. (2 kg)
Weight
Communications
• 3.6V cordless screwdriver, battery & charger.
• ESD wrist strap.
• 30-watt soldering iron.
• Desolderer & soldering aid with pick & scraper/cutter tip.
• Needle nose pliers (2).
• Angled-head lead cutter.
• Insulated tweezers.
• Component gripper & IC extractor.
• 10-piece driver socket set.
• 24-piece driver bit set: Torx, Hex, Phillips, Pozidrive, Slotted, and
Square-Head.
• Socket adapter/extender & socket bit holder/extender.
Cordless Screwdriver & Socket Set
Cordless screwdriver & socket set
Replacement battery)
Battery Charger
SPECIFICATIONS
9.52" (242 mm)
3.6V NiCd battery
Approx. 600 cycles
3-6 hours
120VAC 50-60Hz
170 rpm
3.6VDC
21.7 in-lbs. (2.4 N-m)
* Not for use on precision torque screw requirements.
349
= new product
= Replacement Part
= Accessory
INTERNATIONAL
1.38 lbs. (.63 kg)
Length
Power Requirements
Battery Life
Charging Time
AC adapter input
No-load Speed
Motor
Max. torque
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Weight
CANADA
PA4336
PA6000
PA6001
USA
Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Adjustable torque up to 21.7in-lbs (2.4 N-m).
• Includes 3.6V rechargeable battery.
• AC adapter/battery charger & bit holder included.
• Forward/reverse direction.
• One-hand operation.
• Handle swings easily from pistol to rod form.
• Includes 14-piece socket set: 6-12 mm; 3/16”-1/2”.
• Includes 26-piece driver bits: 3 slotted, 5 Torx,
3 Phillips, 3 Robertson, 12 hex.
• Accepts 1/4” bits.
MADE FOR THE TRADE!™
TERMINATION & TESTING
Clip-On Twisted Pair Kit
Communications
• Provides the most essential tools for terminating voice and data cabling
right at the installer’s side.
• Rugged Cordura® pouch is built to last, lowering replacement costs.
• Heavy-duty metal clip snaps over the installer’s belt so that the kit can
be removed without removing the belt.
• Side holsters allow the installer to carry a flashlight and a favorite
screwdriver.
Cat. No.
UPC No.
Description
46010
46010
Clip-On Twisted Pair Kit
Kit contents may be purchased separately:
46023
46023
Punchdown Tool with 110 Blade
PA1931
Electrician’s Scissors
45579
45579
Twisted Pair Stripper
46500
46500
Pocket-Light Flashlight
45272
45272
Pouch
Replacement Tools and Blades are also available:
46020
46020
Punchdown Tool
46021
46021
Punchdown Tool with 66 Blade
46022
46022
66 Style Punchdown Blade
46024
46024
110 Style Punchdown Blade
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cable TV Coax Termination Kit
350
• Contains the tools and connectors necessary for installing a
Cable TV system.
• Durable Cordura Plus zipper case protects and organizes tools and
includes a see-through pouch for storing connectors.
• Outside pockets provide convenient storage of instruction manuals or
worksite documents.
Cat. No.
UPC No. Description
45466
45466
Cable TV Coax Termination Kit
Kit contents may be purchased separately:
45482
45482
45578
45578 Kwik Stripper® CATV Stripper, 2 Level Stripper for RG6,
RG59, RG7, RG11
Cable Cutter
46801
46801 Kwik Cycle® 9" Crimp Frame with Die Set for F-style
Connectors on RG6 and RG59 Cable
45516
45516
F Connector Insertion Tool
45324
45324
F-style Crimp-on Connectors for Quad-shield RG6 (Qty. 50)
45476
45476
Zipper Case
www.greenlee.com
Cable TV Coax Termination and Test Kit
• Contains the tools, connectors and tester for installing and testing a Cable
TV system.
• Cable TV tone test set uses both electromagnetic and electrostatic pickup
to tone through splitters, directional couplers and taps.
• Durable Cordura® Plus zipper case protects and organizes tools
and includes a see-through pouch for storing connectors.
• Outside pockets provide convenient storage of instruction manuals
or worksite documents.
Cat. No.
UPC No.
Description
45467
45467
Cable TV Coax Termination and Test Kit
Kit contents may be purchased separately:
45482
45578
45482
Cable Cutter
45578 Kwik Stripper® CATV Stripper, 2 level stripper for RG6,
RG59, RG7, RG11
46801
45516
45323
402T
402R
45477
46801 Kwik Cycle® 9" Crimp Frame with Die Set for F-style
Connectors on RG6 and RG59 Cable
45516
F Connector Insertion Tool
45323 F-style Crimp-on Connectors for Quad-shield RG6 (Qty. 25)
60376 Cable TV Tone Generator
60377 Cable TV Tone Receiver
45477 Zipper Case
Communications
Coax/Twisted Pair LAN Termination and Test Kit
Cat. No.
UPC No.
Description
45468
45468
Coax/Twisted Pair LAN Termination and Test Kit
Kit contents may be purchased separately:
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
351
= new product
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
45482
45482
Cable Cutter
45579
45579
Kwik Stripper® Twisted Pair Stripper
46023
46023
Punchdown Tool with 110 Blade
46022
46022
66 Style Punchdown Blade
45575
45575 Telephone Ratchet Crimper for 4-, 6- and
8-position Modular Plugs
45577
45577
Kwik Stripper Coax Stripper, 3 Level
46800
46800 Kwik Cycle 9" Crimp Frame with Die Set for
BNC-style Connectors on Thinnet RG8 Cable
45481
45481
Center Conductor Cutter for Coax Cable
AT8
08693
AdapToner Modular Breakout Tone Generator
200EP
08671
Inductive Amplifier Probe
45760
45760
Category 5 Connectors RJ45, 8-Position (Qty. 50)
45478
45478
Carrying Case
USA
Tel: 800.435.0786
Fax: 800.451.2632
• Provides the essential tools, connectors and testers necessary for
maintaining a Local Area Network (LAN), twisted pair cabling and coax
Ethernet (Thinnet) cabling.
• Durable Cordura Plus carrying case protects and organizes tools
and includes a see-through pouch for storing connectors.
• Outside pockets provide convenient storage of instruction manuals
or worksite documents.
MADE FOR THE TRADE!™
Voice and Category 5 Data Termination Kit
Communications
• Includes the tools and connectors necessary for installing a voice
and data network.
• Durable Cordura® Plus zipper case protects and organizes tools
and includes a see-through pouch for storing connectors.
• Outside pockets provide convenient storage of instruction manuals
or worksite documents.
Cat. No. UPC No. Description
45469
Kit contents may be purchased separately:
45482 45482
Cable Cutter
45579
46023
46022
45575
45760
45751
45479
45469
Voice and Category 5 Data Termination Kit
45579
Kwik Stripper® Twisted Pair Stripper
46023
Punchdown Tool with 110 Blade
46022
66 Style Punchdown Blade
45575 Telephone Ratchet Crimper for 4-, 6- and 8-Position
Modular Plugs
45760
Category 5 Connectors RJ45, 8-Position (Qty. 50)
45751
Flat Cable Connectors RJ12, 6-Position, 6-Conductor (Qty. 50)
45479
Zipper Case
Category 5 Data Termination and Test Kit
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Includes the tools, connectors and testers necessary for installing
a Cat 5 data network.
• Durable Cordura® Plus zipper case protects and organizes tools
and includes a see-through pouch for storing connectors.
• Outside pockets provide convenient storage of instruction manuals
or worksite documents.
352
Cat. No.
UPC No.
Description
45470
45470
Category 5 Data Termination and Test Kit
Kit contents may be purchased separately:
45482
45482
Cable Cutter
45579
45579
Kwik Stripper® Twisted Pair Stripper
46023
46023
Punchdown Tool with 110 Blade
45575
45575 Telephone Ratchet Crimper for 4-, 6- and 8-Position
Modular Plugs
45760
45760
Category 5 Connectors RJ45, 8-Position (Qty. 50)
468T
60379
Modular Cable Tester Transmitter with Tone Generator
468R
60380
Modular Cable Tester Receiver
45485
45485
Zipper Case
www.greenlee.com
Professional Installation Kit
• Includes all the tools, connectors and testers for installing and maintaining
most types of communications cabling including voice, data, cable TV and
coax Ethernet networks.
• Durable Cordura® Plus carrying case protects and organizes tools and
includes see-through pouches for storing connectors.
• Outside pockets provide convenient storage of instruction manuals or
worksite documents.
Cat. No.
UPC No.
Description
45471
45471
Professional Installation Kit
Kit contents may be purchased separately:
45482
45482
Cable Cutter
45579
45579
Kwik Stripper® Twisted Pair Stripper
46023
46023
Punchdown Tool with 110 Blade
46022
46022
66 Style Punchdown Blade
45575
45575 Telephone Ratchet Crimper for 4-, 6- and 8-position
Modular Plugs
AT8
08693
AdapToner Modular Breakout Tone Generator
200EP
08671
Inductive Amplifier Probe
PM-400K
11877
PairMapper® with Remotes 1-4
45577
45577
Kwik Stripper Coax Stripper, 3 Level
45040
45040
Kwik Stripper 2-Level Coax Cartridge
46801
46801 Kwik Cycle® 9" Crimp Frame with Die Set for
Communications
F-style Connectors on RG6 and RG59 Cable
46824 Kwik Cycle Die Set for BNC-style Coax Connectors on
Thinnet RG58 Cable
45481
45481
Center Conductor Cutter for Coax Cable
45516
45516
F Connector Insertion Tool
45324
45324 F-style Crimp-on Connectors for Quad-shield RG6
(Qty. 50)
45760
45760
45751
45751 Flat Cable Connectors RJ12, 6-Position, 6-Conductor
(Qty. 50)
45486
45486
Category 5 Connectors RJ45, 8-Position (Qty. 50)
Carrying Case
Telecom Technician Kit
Description
45472
Telecom Technician Kit
Kit contents may be purchased separately:
46023
46023
Punchdown Tool with 110 Blade
46022
46022
66 Style Punchdown Blade
PT-T02
08708
Electrician’s Scissors
PT-T01
08707
Cable Splicer’s Knife
77HP
08687
Tone Generator
200EP
08671
Inductive Amplifier Probe
PE930
60487
Telephone Test Set
750C
08685
Cabling Pouch
353
= new product
= Replacement Part
= Accessory
INTERNATIONAL
UPC No.
45472
CANADA
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
• Contains all the essential tools and testers to install and maintain
the voice network.
• Durable woven nylon pouch fits any belt up to 5" wide and keeps
all the tools conveniently accessible.
USA
46824
Tel: 800.435.0786
Fax: 800.451.2632
MADE FOR THE TRADE!™
Telecom Field Technician Kit
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Cat. No.
UPC No. Description
45473
45473
Kit contents may be purchased separately:
45482
45482 Cable Cutter
46023
46023
Punchdown Tool with 110 Blade
46022
46022
66 Style Punchdown Blade
PT-T02
08708
Electrician’s Scissors
PT-T01
08707
Cable Splicer’s Knife
77HP
08687
Tone Generator
200EP
08671
Inductive Amplifier Probe
PE930
60487
Telephone Test Set
46040
46040
TurTEL6 Modular Adapter and Polarity Tester
DM-800
07549
Digital Multimeter
46500
46500
Pocket-Light Flashlight
1955
06857
Wire Strippers/Cutter, 10-18 AWG Solid, 12-20 AWG Stranded
47439
47439
Screwdrivers, 6-piece Set.
45487
45487
Carrying Case
Telecom Field Technician Kit
FIBER OPTIC KITS
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Communications
• Contains all the essential tools and testers to maintain a
telecommunications network.
• Top quality digital multimeter and telephone test set make
troubleshooting a voice network easy.
• DMM features an industry-leading lifetime warranty.
• Insulated screwdrivers protect the technician up to 10,000V.
• Durable Cordura® Plus carrying case protects and organizes
tools and includes see-through pouches for storing connectors.
• Outside pockets provide convenient storage of instruction
manuals or worksite documents.
354
Fiber Optic Hand Tools Kit
• Contains the most commonly used fiber optic termination tools
in a durable Cordura® Plus zipper case.
Cat. No.
UPC No.
Description
45655
45655
Fiber Optic Hand Tools Kit
Kit contents may be purchased separately:
1955
06857
Pro-Plus Wire Stripper, 10-18 AWG
45589
45589
Fiber Optic Buffer Stripper
45593
45593
Carbide-tipped Scribe
45637
45637 Kwik Cycle® 8" Crimp Frame with 0.151", 0.178", 0.213"
Hex Cavities
45651
45651
Fiber Optic Inspection Microscope
45599
45599
Stainless Steel Polishing Puck
45612
45612
Resilient Polishing Pad, 3" x 8" (7.6 x 203.2 mm)
45644
45644
Zipper Case
www.greenlee.com
Fiber Optic Termination Kit
• Contains all of the tools and consumable materials necessary for epoxy
and polish connector terminations.
• Durable Cordura® Plus carrying case protects and organizes tools
and includes see-through pouches for storing connectors.
• Outside pockets provide convenient storage of instruction manuals
or worksite documents.
Cat. No.
UPC No.
Description
45658
45658
Fiber Optic Termination Kit
Kit contents may be purchased separately:
45586
45586
Fiber Optic Kevlar® Shears
1955
06857
Pro-Plus Wire Stripper, 10-18 AWG
45589
45589
Fiber Optic Buffer Stripper
45593
45593
Carbide-Tipped Scribe
45637
45637 Kwik Cycle® 8" Crimp Frame with 0.151", 0.178", 0.213"
Hex Cavities
45651
45651
Fiber Optic Inspection Microscope
45599
45599
Stainless Steel Polishing Puck
45612
45612
Resilient Polishing Pad, 3" x 8" (7.6 x 203.2 mm)
45639
45639
Carrying Case
Kit includes the following consumable items which are not sold separately:
50 Sheets Polishing Paper, 0.3 micron
100 Lint-free Wipes
50 Sheets Polishing Paper, 1 micron
10 Alcohol Wipes
50 Sheets Polishing Paper, 5 micron
1 Alcohol Bottle
10 ml (0.34 oz.) Opticure Adhesive
1 Water Bottle
26 ml (0.9 oz.) Opticure Primer
1 Fiber Debris Disposal Container
1 Pair Safety Glasses
10 Syringes
1 Plastic Utility Box
10 Needle Tips
1 Felt-tipped Marker
Communications
Ultimate Fiber Tool Kit
Description
PA4924
Ultimate Fiber Tool Kit
Ultimate fiber tool Kit Includes
= Replacement Part
= Accessory
355
INTERNATIONAL
= new product
Kevlar® Cutter
ProGrip 5-in-1 Fiber Optic Stripper
Economy Fiber Optic Stripper
Adjustable Jacket Stripper
AM 25 Slitter
AM 35 Slitter
LC CST-mini Stripper
1600 Series Crimp Frame
STII Type Die Set
SMA/SMB/FC/BICONIC Die Set
SC & ST Die Set
Fiber Optic Scribe
SC/ST/FC Polishing Puck
LC Polishing Puck
Plano® Tackle Box
Ultimate Tool Bag
Tel: +1.815.397.7070
Fax: +1.815.397.9247
PA1511
PA1171
PA1162
PA1161
PA1820
PA1821
PA1258
PA1600
PA2044
PA2664
PA2668
PA1922-1
PA1920-1
PA1926-1
N/A
PA4923
Tel: 800.435.0786
Fax: 800.524.2853
Weight
10.5“ W x 10.5” L x 9.5” D
267 mm W x 267 mm L x 241 mm D
5.65 lbs. (2.56 Kg)
CANADA
SPECIFICATIONS
Dimensions
USA
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
This Ultimate Kit contains all the slitters, strippers, and Kevlar® cutters you
will need to start your fiber optic terminations. Also included is the premium
1600 Series Crimper with 3 interchangeable dies. The Ultimate Tool Bag
has plenty of room for you to add your consumables.
MADE FOR THE TRADE!™
FiberReady Tool Kit
This kit contains an assortment of cable sliters, strippers and Kevlar®
cutters to prep fiber optic cable along with our 1600 Series premium
crimper with interchangeable dies.
Cat. No.
Description
PA906001
FiberReady Tool Kit
SPECIFICATIONS
Communications
Dimensions
Weight
11.7 “W x 8.2” L x 3.3” D
297 mm W x 208 mm L x 84 mm D
3.1 lbs. (1.41 Kg)
FIBERREADY Tool Kit Includes
PA1511
PA1171
PA1822
PA1600
PA2044
PA2664
PA2668
N/A
Kevlar® Cutter
ProGrip 5-in-1 Fiber Optic Stripper
Universal Cable Stripper
1600 Series Crimp Frame
STII Type Die Set
SMA/SMB/FC/BICONIC Die Set
SC & ST Die Set
Zippered Portfolio Case with Handles
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Kevlar is a registered trademark of E.I. Dupont, Inc.
356
Storage & Material Handling
Greenlee storage systems protect the tools you’ve
invested in and use day in and day out.
From our smallest chests to our large field office,
our storage boxes are as tough as the trade.
With our patented, dual-recessed lock
enclosures, you’ll prevent theft. And
newly-designed ergonomic features
make Greenlee’s storage and
handling systems easy to use
and easy to move around
the jobsite.
Contents
Chests
Slant Top Boxes
Flat Top Boxes
Utility Cabinets
Mobile Workbench
Welder’s Boxes
Field Office
Casters
Wire And Cable Handling
Caddys
Carts
Dispensers
Stands
Reel Rollers
410
411
412
413
415
415
416
417
418
418
421
424
425
426
MADE FOR THE TRADE!™
® Registered: The color green for job boxes is a registered trademark of Greenlee Textron Inc.
MADE FOR THE TRADE!™
STORAGE
Chests
2448
Storage & Handling
1332
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
2460
410
• Recessed and concealed lock protectors for maximum security against drilling
and cutting lock. (Model 1332 one lock protector only.)
• Enhanced lid bolster for added support and durability.
• Finger-groove lid handle for easy opening.
• Convenient storage tray on back wall for small items (except Models 1332,
1636 and 2142).
• Steel support arm(s) to hold lid in open position.
• Heavy-duty piano hinges with non-removable pin.
• Patented, ergonomically designed fold-down recessed handles.
• New angled 3-1/2" high support skids feature threaded holes for
easy caster installation.
• Recommend #1 and #5 Masterlock padlocks or equivalent.
CAPACITY
CAT. No. UPC NO. Ft3
A
Optional casters available for
increased mobility.
See page 368 for options
B
C
DIMENSIONS
D
E
F
G
H
WEIGHT
lbs.
kg
1332
38717
4.9
14"
32"
19"
—
29.5"
—
—
14.5"
78
35
1636
38718
6.7
17"
36"
19"
—
33.5"
—
—
14.5"
101
46
2142
31651
9.7
20"
42"
20"
—
39.5"
—
—
15.5"
124
56
2448
23273
16
25"
48"
24"
4"
45.5"
4"
17.5" 15.5"
159
72
2460
23363
20
25"
60"
24"
4"
57.5"
4"
17.5"
15.5"
184
83
3048
23362
25
30"
48"
30"
4"
45.5"
4"
23.5"
21.5"
200
91
2472
07483
24
25"
72"
24"
4"
69.5"
4"
17.5" 15.5"
214
97
www.greenlee.com
Slant-Top Boxes
3660
2260
D
B
CAPACITY
CAT. No. UPC NO. Ft3
A
B
C
DIMENSIONS
D
E
F
G
H
WEIGHT
lbs.
kg
2260
23270
32
22"
60"
32"
36"
12"
12"
21"
—
273
124
3648
23276
34
36"
48"
30"
48"
5"
12"
27"
11"
270
123
3660
23196
44
36"
60"
30"
48"
5"
12"
27"
11"
314
142
= new product
= Replacement Part
= Accessory
Optional casters available for
increased mobility.
See page 368 for options
Tel: +1.815.397.7070
Fax: +1.815.397.9247
C
411
INTERNATIONAL
G
A
CANADA
F
USA
H
Tel: 800.435.0786
Fax: 800.524.2853
E
• Large capacity storage with traditional slant-top design.
• Recessed and concealed lock protectors provide maximum security against
drilling and cutting locks.
• Channel reinforcements on lid, lock side panels into lid for added security
when closed.
• Hinged lower shelf enables storage of larger items.
• Hemmed (reinforced) high-strength shelves.
• Continuous, non-removable hinge pins help prevent theft.
• Strategically located, easily accessible, durable gas-shocks provide for ease in
opening lid (except Model 2260).
• New angled 3-1/2” high support skids feature threaded holes for
easy caster installation.
• Angled handle recess prevents pinch points.
• Features two reinforced steel shelves with large lip to prevent items from
rolling off (Model 2260, one shelf only).
• Double-hinged cover on Models 3648 and 3660 folds up and out of the way.
• Model 2260 comes with lid support to form waist-high, flat work area.
• Patented, ergonomically designed fold-down recessed handles.
• Recommend #1 and #5 Masterlock padlocks or equivalent.
Tel: 800.435.0786
Fax: 800.451.2632
Hinged Lower Shelf
Storage & Handling
3648
MADE FOR THE TRADE!™
Flat-Top Boxes
4860
Storage & Handling
3360
4848
4872
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Hinged Lower Shelf
412
• Flat-top design provides more storage capacity for tall, bulky items,
plus a large work surface for jobsite plans.
• Recessed and concealed lock protector inhibits forced entry
and corrosion to lock.
• Channel reinforcements on lid, lock side panels into lid for added
security when closed.
• Hinged lower shelf allows for easy storage of larger objects
(except Model 3360).
• Angled handle recess prevents pinch points.
• Hemmed (reinforced) high-strength shelves.
• Continuous, non-removable hinge pins help prevent theft.
• Side-wall storage (except Model 3360).
• Strategically located, easily accessible, durable gas springs provide
for ease in opening lid.
• Double hinge cover folds up and out of the way.
• New angled 3-1/2” high support skids feature threaded holes for
easy caster installation.
• Patented, ergonomically designed fold-down recessed handles.
• Recommend #1 and #5 Masterlock padlocks or equivalent.
Optional casters
available for increased mobility.
See page 368 for
options
CAPACITY
CAT. No. UPC NO. Ft3 A
B C
D
DIMENSIONS
E
F
G H I
J
34.5 33" 60" 30" — 12.5" 12" 20" — —
WEIGHT
lbs . kg
3360
38719
—
256
116
4848
35043
40
48" 48" 30" 11"
7"
12" 27" 2" 3" 17"
283
128
4860
35057
50
48" 60" 30" 11"
7"
12" 27" 2" 3" 17"
358
162
4872
07487
60
48" 72" 30" 11"
7"
12" 27" 2" 3" 17"
373
169
www.greenlee.com
Utility Cabinets
2-Door Utility Cabinet
Half-Storage/Half Cabinet Box
Storage & Handling
5660LH
5660L
2-DOOR, 30" DEPTH STORAGE CABINET
5760TD
D
E
F
G
DIMENSIONS
H
I
J
K
L
M
N
O
WEIGHT
lbs.
kg
38659
46
56"
60"
24"
15" 10.5" 11.5" 10"
10"
2"
14"
3"
23.5" 20.5" 50.5” 24"
389
5660LH 07486
46
56"
60"
24"
15" 10.5" 11.5" 10"
10"
2"
14"
3"
23.5" 20.5" 50.5" 24"
375
176
170
5760TD 07969
59.3
56"
60"
30"
15" 10.5" 11.5" 10" 10"
2"
14"
3"
23.5" 26.5" 50.5” 24"
441
200
413
= new product
= Replacement Part
= Accessory
INTERNATIONAL
C
CANADA
5660L
B
USA
CAPACITY
CAT. No. UPC NO. Ft3
A
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Optional casters available
for increased mobility.
See page 368 for options
Tel: 800.435.0786
Fax: 800.524.2853
• Recessed and concealed lock protector inhibits forced entry
and corrosion to lock.
• Flush-mounted doors.
• Finger-groove door handles.
• Front-door storage.
• Hemmed (reinforced) high-strength shelves.
• Large, lower storage areas for bigger items.
• Continuous, non-removable hinge pins to prevent theft.
• New angled 3-1/2” high support skids feature threaded holes for
easy caster installation.
• Three 3-1/2" high support skids.
• Weather-resistant design.
• Open storage for shovels, picks, brooms and other long-handled
tools. (Model 5660LH only.)
• Patented, ergonomically designed fold-down recessed handles.
• Recommend #1 and #5 Masterlock padlocks or equivalent.
Tel: 800.435.0786
Fax: 800.451.2632
5660L
MADE FOR THE TRADE!™
Mesh Cabinet
Storage & Handling
• High-visibility mesh screen on three (3) sides.
• Forty-eight (48) smaller, individual compartments, enabling storage
of smaller tools and accessories.
• Platform for shovels, picks, brooms and other long-handle tools.
• Sturdy handle for mobility.
• Supplied with two (2) swivel casters and two (2) rigid
4" (102 mm) casters for easy mobility (Model 696).
• Recommend #1 and #5 Masterlock padlocks or equivalent.
5060MESH
Included
CAT. No.
CAPACITY
UPC NO. Ft3
A B C
D
E
DIMENSIONS
F G H I J K L M N O P R S
T
U
V W X Y Z
WEIGHT
lbs. kg
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Bi-Fold Cabinet
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
5060MESH 04460 37.3 52" 48" 28" 22" 10.5" 10" 2" 4" 5" 35" 5.5" 23" 11.5" 4" 3" 5.5" 6" 23" 5.5" 1.5" 3.5" 5" 3" 9" 2" 401 182
414
5860
• Maximum storage capacity with minimum floor space requirements.
• Four (4) individual 15" d. x 14-1/2" h. x 60" w. (381 x 368 x 1524 mm) storage
compartments on each side.
• Reinforced steel shelves welded in place for added strength and durability.
• All shelves feature large front lip to keep small items from rolling off.
• Each bi-fold section is mounted on four casters for easy opening and closing.
• Six (6) swivel and two (2) rigid 6" (152 mm) casters included for easy mobility
(Models 503 and 603).
• Recommend #1 and #5 Masterlock padlocks or equivalent.
CAPACITY
CAT. No. UPC NO. Ft3
A
5860
35068
60.4
B
DIMENSIONS
C D E F G
H
I
WEIGHT
lbs. kg
58" 60" 15" 13" 13" 12" 1" 57" 14.5" 549 249
Included
www.greenlee.com
Mobile Workbench
3548
CAPACITY
CAT. No. UPC NO. Ft3
A
3548
31229
20
B
C
D
E
DIMENSIONS
F G H I
J
K
L
M
Storage & Handling
• Tough composition board work surface on top with built-in chain vise and telescoping
wrench stop.
• Removable self-stored shelf enables storage of larger items.
• Supplied with two (2) locking swivel casters and two (2) rigid
6" (152 mm) casters for easy mobility (Model 703).
• Recessed and concealed lock protector inhibits forced entry and corrosion to lock.
• Flush-mounted doors.
• Finger-groove door handles.
• Front door storage.
• Hemmed (reinforced) high-strength shelves.
• Large lower storage areas for bigger items.
• Continuous, non-removable hinge pins to prevent theft.
• Angled handle recess to prevent pinch points.
• Patented, ergonomically designed fold-down recessed handles.
• Recommend #1 and #5 Masterlock padlocks or equivalent.
WEIGHT
lbs. kg
30" 48" 24" 11" 20.5" 17.5" 15" 9.5" 2" 13" 3" 17" 27" 293 133
Included
Tel: 800.435.0786
Fax: 800.451.2632
1531
1230
= Accessory
Capacity
HEIGHT
WIDTH
DEPTH
lbs.
kg
3.3
12"
30"
16"
42
19
4.8
15"
31"
18"
52
24
Cat. No. UPC No.
Ft3
1230
31510
1531
23274
Weight
415
INTERNATIONAL
= Replacement Part
Dimensions
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
• Protects small tools and supplies.
Single lock hasp for use with padlock.
• Compact side handles for easy portability.
• Heavy-duty hinges, plus chain connector
to hold lid in open position.
• Recommend #1 and #5 Masterlock padlocks or equivalent.
USA
Welder’s Boxes
MADE FOR THE TRADE!™
Storage & Handling
Field Office
Tamper-proof lock
protectors (for upper
and lower doors).
8060 DLX
Slanted work surface with
lockable, concealed
storage area.
Door grooves provide
a gripping surface for
convenient opening.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
416
Top door opens with a gas
spring and is supported by
a locking arm.
• Slanted work surface with lockable, concealed storage area.
• Concealed lock protectors protect locks from drilling and cutting.
• Weather stripping on doors to help protect documents and tools
from the elements.
• Lid with heavy-duty gas spring and a locking arm for ease
of opening and safety.
• Shelving throughout, for organizing and storing jobsite tools
and supplies.
• Grooved front doors for ease of opening and storage compartment
access.
• Patented, ergonomically designed fold-down recessed handles.
• Continuous, non-removable pin hinges.
• Overlapping corners, rolled edges, and strategically placed
reinforcements for added strength.
• Recommend #1 and #5 Masterlock padlocks or equivalent.
• Welded 16-gauge steel construction for durability.
• Transportable with forklift.
• Optional casters available for increased mobility.
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
(Tools sold seperately)
Optional casters available for
increased mobility.
See page 368 for options
CAPACITY
CAT. No. UPC NO. Ft3
A
B
C
D
DIMENSIONS
E
F
G
H
8060 DLX 04719 116.5 80" 41.6" 55.6" 20.6" 26.8" 19.2" 60"
I
WEIGHT
J
k lbs. kg
14" 15.5" 24" 42"
683
310
www.greenlee.com
Casters
503/603
696/697
7-1/2"
5-5/8"
Cat.
No.
503*
603*
703†
696*
697*
UPC
No.
28044
23405
08420
15341
89189
Wheel
Dia. Tread
Ship
in.
in. Capacity Weight
Description (mm) (mm) lbs. kg lbs. kg
4 Swivel
6
2 2000 907 22 10
(152) (51)
2 Rigid,
2
6
2 Swivel
(152) (51) 2000 907 20 9
2 Rigid,
6
2 2000 907 20 9
2 Locking Swivel (152) (51)
2 Rigid,
2 1600 726 13 6
4
2 Swivel
(102) (51)
4 Swivel
2 1600 726 15 7
4
(102) (51)
696
697
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Included
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Storage & Handling
• Caster bolt pattern 2-7/8" x 3-1/4".
• Polyolefin-injected molded hard casters: stain-resistant,
chemical-resistant, and non-marking.
caster selection chart
storage
caster
box
cat no.
cat. No.
503
603
703
1332
✓
✓
1636
✓
✓
2142
✓
✓
2448
✓
✓
2460
✓
✓
3048
✓
✓
2472
✓
✓
1230
1531
5060MESH
✓
✓
3360
✓
✓
4848
✓
✓
4860
✓
✓
4872
✓
✓
2260
✓
✓
3648
✓
✓
3660
✓
✓
5660L
✓
✓
5660LH
✓
✓
5760TD
✓
✓
5860
Included
Included
3548
✓
✓
Included
8060DLX
✓
✓
*Each caster set includes (16) 3/8-16 x 1" self-threading mounting screws.
†Each caster set includes (16) 3/8-16 x 1" carriage bolts; (16) 3/8-16 hex nuts; (16) 3/8 lockwashers.
Note: Screw/washer kit p/n 50062913 is necessary for mounting 703/803 casters on boxes other than 3548.
Replacement Parts
22618
22618
13 oz. (384 ml) Aerosol Can of Greenlee
Green Spray Paint
1.2
.5
10378
10378
13 oz. (384 ml) Aerosol Can of Greenlee
Flat Green Spray Paint*
1.2
.5
NOTE: The color green is a registered trademark for Test Instruments, Job Boxes, Benders and Pulling Equipment.
*For Storage Boxes
= new product
= Replacement Part
= Accessory
Weight
lbs. kg
417
INTERNATIONAL
Description
CANADA
UPC No.
USA
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Closely matches Greenlee painted products.
Tel: 800.435.0786
Fax: 800.524.2853
Greenlee Green Spray Touch-up Paint
Tel: 800.435.0786
Fax: 800.451.2632
REPLACEMENT PARTS
Cat. No. UPC No. Description
06291
06291 Box Caster Bolt Set (16-Bolt Kit)
08426
08426 Box Caster Bolt Set 16-Bolt Kit (3548, 5860 only)
52025978 20965 Lid Support – (L) Side
52025979 20966 Lid Support – (R) Side
08428
08428 10 mm Gas Spring Ball Stud Replacement Kit
(all Slant/Flat-Tops)
53950
53950 Gas Springs for 2260
53904
53904 Gas Springs for 3360, 4848 and 4860 Storage Boxes
53951
53951 Gas Springs for 3648 and 3660
04339
04339 Latch Repair Kit (5860)
54997
54997 Latch (5860)
54998
54998 Strike (5860)
55124
55124 Latch Threaded Rod (5860)
08427
08427 13 mm Gas Spring Ball Stud Replacement Kit (8060 DLX)
55294
55294 Replacement Gas Spring Kit – Shock and (2) Clips (8060 DLX)
01886
01886 Replacement Gas Spring Kit for 4872
MADE FOR THE TRADE!™
WIRE AND CABLE HANDLING
Folding Hand Caddy
Storage & Handling
• Holds up to 6 spools of #10 wire.
• Folds down to 2-1/2" (63.5 mm) for easy storage.
• Pinless design eliminates loose parts.
Cat. No.
UPC No.
Description
9501
01202
Folding Hand Caddy
SPECIFICATIONS
Size
Capacity
10" (254 mm) H x 18-1/2" (470 mm) W
Six 500' (152.4 m) spools of #10 AWG
Maximum Spool Diameter: 7.5" (190 mm)
Maximum Spool Diameter (top spindle, with empty bottom spindle);
12.5" (317 mm)
Maximum Spool Width: 8.5" (215 mm)
5 lbs. (2 kg)
Weight
Hand Caddy
• Holds four 500' (152.4 m) spools of #10 AWG (7" dia. by 6"–10" wide)
• Holds up to eight 500' (152.4 m) spools of #12 AWG (7" dia. x 5" wide)
• 3/8" (9.5 mm) diameter solid steel spool support spindles.
• Spool retaining washers on spindles.
• Pinless design eliminates loose parts.
Cat. No.
UPC No.
Description
9502
08187
Hand Caddy
SPECIFICATIONS
Size
10-1/2" (267 mm) H x 14" (356 mm) W x
22.5" (572 mm) L
Eight 500' (152.4 m) spools of #12 AWG; Four
500' (152.4 m) spools of #10 AWG
Maximum Spool Diameter: 9" (229 mm)
Maximum Spool Width: 10.5" (266 mm)
5 lbs. (2 kg)
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Capacity
418
Data Cable Caddy
Weight
• Width is ideal for large diameter spools of coax,
data and communications cable.
• Especially handy for 6" (152 mm) wide and up to
19" (483 mm) diameter spools.
• Folds down for easy storage.
• Pinless design eliminates loose parts.
Cat. No.
UPC No.
Description
9520
01228
Data Cable Caddy
SPECIFICATIONS
Size
Capacity
Weight
21" (533 mm) L x 28-1/2" (724 mm) W x 11-1/2" (292 mm) H
Maximum Total Spool Weight: 100 lbs. (45 kg)
Maximum Spool Diameter: 19" (483 mm)
Maximum Spool Width: 24.50" (622 mm)
11 lbs. (5 kg)
www.greenlee.com
Wire Reel Support Frame
• 914 consists of one frame with 2 wheels only; 2 or more 914’s and a
spindle made of 1" rigid conduit are required to make a reel support setup.
• Easy to set up. Insert spindle in one 914 support frame, tighten locking
screw, slide reels on spindle, insert spindle in second 914 support frame,
tighten thumb screw and you’re ready to go.
• Casters swivel and lock for ease of use.
UPC No.
Description
914
26438
Wire Reel Support Frame
SPECIFICATIONS
(2 Shown)
Size
Capacity
17-1/2" (444 mm) W x 14" (355 mm) H
1" Rigid Conduit for spindle; hold 500' (152.4 m) to 2500' (762 m)
spools up to 18" (457 mm) in diameter
8.4 lbs. (3.8 kg)
Weight
Deluxe Wire Caddy
• All welded steel frame.
• 6 wire spool axles with spring clip locks.
• Collapsible wire guide.
• Swivel caster set with two (2) locking casters for easy use.
Cat. No.
UPC No.
Description
906
33405
50303
33026
33405
50303
Wire Caddy with Casters and Wire Guide
Caster Set (2 swivel, 2 swivel lock)
Hitch Clip
16" (406 mm) L x 26" (660 mm) W x 17-1/2" (444 mm) H
Six 500' (152 m) spools up to 8" (203 mm) in diameter of #6
thru #10 AWG
Maximum Spool Width: 2 x 8.5" (215 mm), 4 x 12.13" (308 mm)
14.8 lbs. (6.7 kg)
Weight
Description
909
52284
52285
22875
52284
52285
Wire Dispenser
Swivel Caster (1)
Wheel (2)
SPECIFICATIONS
Size
Capacity
Weight
39" (990 mm) L x 30" (762 mm) W x 31" (787 mm) H.
Six 2,500' (762 m) spools up to 18" (457 mm) in diameter.
Maximum Spool Width: 13" (330 mm)
88 lbs. (40 kg)
419
= new product
= Replacement Part
= Accessory
INTERNATIONAL
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• All steel welded frame with 6 reel spindles and feeding eye.
• Angled spindles keep reels in place without locks and help brake
the reel while paying out.
• Mobile, two (2) fixed wheels and one (1) that swivels and locks,
allow easy movement and control.
• Fits through a 30" (762 mm) doorway.
CANADA
6-Spindle Wire Caddy
USA
Size
Capacity
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
Storage & Handling
Cat. No.
MADE FOR THE TRADE!™
6-Reel Caddy
Storage & Handling
• Spindle sleeves to facilitate easier pay-out of wire.
• Holds up to six (6) 2,500' (762 m) spools of #14, #12, or #10 AWG wire.
• Folds for easy storage.
• Two (2) fixed and two (2) locking swivel casters for easy portability.
• Pinless design eliminates loose parts.
Cat. No.
UPC No.
Description
9517
01221
01220
01225
01221
01220
6-Reel Caddy
Replacement Caster
Replacement Wheel
SPECIFICATIONS
Size
Capacity
41" (1041 mm) H x 32" (813 mm) W
Six (6) 2500' (762 m) spools of #10 AWG wire
Maximum Total Spool Weight: 450 lbs. (204 kg)
Maximum Spool Diameter: 15" (380 mm)
Maximum Spool Width: 14.75" (375 mm)
75 lbs. (34 kg)
Weight
10-Reel Caddy
• Spindle sleeves to facilitate easier pay-out of wire.
• Holds up to ten (10) 2,500' (762 m) spools of #10 AWG wire.
• Folds down for easy storage.
• Two (2) fixed and two (2) locking swivel casters for easy portability.
• Pinless design eliminates loose parts.
Cat. No.
UPC No.
Description
9516
01221
01220
01222
01221
01220
10-Reel Caddy
Replacement Caster
Replacement Wheel
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
Size
Capacity
Weight
Wire Dispenser
• All welded steel construction.
• Includes two (2) fixed and two (2) swivel locking heavy-duty casters.
• The spool rack consists of ten (10) spindles and an adjustable guide loop,
and can be turned 360° independent of the base.
• Spindles are angled to contain reels and act as a brake while paying out wire.
• Fits through a 36" (915 mm) opening.
Cat. No.
UPC No.
Description
910
51488
53259
21982
51488
53259
Wire Dispenser
Caster (Rigid)
Caster (Swivel)
SPECIFICATIONS
Size
Capacity
420
48" (1219 mm) H x 32" (813 mm) W
Maximum Total Spool Quanity - Ten (10) 2500' (762 m)
spools of #10 AWG wire
Maximum Total Spool Weight: 750 lbs. (340 kg)
Maximum Spool Diameter: 15" (380 mm)
Maximum Spool Width: 14.63" (370 mm)
101 lbs. (46 kg)
Weight
36-1/4" (921 mm) L x 31-1/2" (800 mm) W x
59" (1499 mm) H.
Ten (10) 2500' (762 m) spools up to
18" (457 mm) in diameter.
Maximum Spool Width: 14.18" (360 mm)
196 lbs. (89 kg)
www.greenlee.com
Hand Truck / Wire Cart
• Holds up to twelve (12) spools of #12 AWG wire or eight (8) spools
of #10 AWG wire.
• 10" (254 mm) diameter pneumatic tires for jobsite portability.
• Pinless design eliminates loose parts.
• Four (4) solid steel 1/2" (13 mm) spindles included.
• Lay cart flat when dispensing wire. Upright for use as hand truck.
UPC No.
Description
9505
01207
01205
01207
Hand Truck Caddy
Spindle (9505/9510)
SPECIFICATIONS
Size
Capacity
48" (1219 mm) H x 28-1/4" (718 mm) W
Maximum Total Spool Weight: 200 lbs (90.7 kg)
4000' (1219 m) # 10 AWG wire
Maximum Spool Diameter: 7.5" (190 mm)
Dolly Lift (Maximum): 250 lbs. (113 kg)
Maximum Spool Width: 18" (457 mm)
32 lbs. (14 kg)
Weight
Deluxe A-Frame Wire Cart
Storage & Handling
Cat. No.
• Holds up to twenty for (24) spools of #12 AWG wire
or sixteen (16) spools of #10 AWG wire.
• Folds for easy storage.
• 10" (254 mm) diameter pneumatic tires for jobsite portability.
• Pinless design eliminates loose parts.
• Eight (8) solid steel 1/2" (12.7 mm) spindles included.
• Optional Basket Caddy available to dispense metal-clad cable
(see page 363).
Description
9510
01207
01214
01207
Deluxe A-Frame Mobile Caddy
Spindle (9505/9510)
SPECIFICATIONS
Size
Capacity
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
421
= new product
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Weight
48" (1219 mm) H x 28-1/4" (718 mm) W
Maximum Total Spool Weight: 400 lbs. (181 kg)
Maximum Spool Diameter: 7.5" (190 mm)
Maximum Spool Width: 18" (457 mm)
47 lbs. (21 kg)
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
MADE FOR THE TRADE!™
Hand Truck / Wire Cart
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
38733
38733
With 10462 Expander Kit
Cat. No.
UPC No.
Description
38733
10462
50303
38774
38733
10462
50303
38774
Hand Truck Wire Cart
Expander Kit
Hitch Clip
Spindle (38733)
SPECIFICATIONS
Size
38733 46" (1168 mm) H x 23" (584 mm) W × 22-1/2" (571 mm) D
10462 41" (1041 mm) H x 12-5/8" (321 mm) W
38733 58 lbs. (26 kg)
10462 15.7 lbs. (7 kg)
Weight
10462
wire capacity chart
Number of spools
38733 With
Maximum
Wire
10462
Spool
Cart Expander Diameter
15
24
7" (178 mm)
10
16
7" (178 mm)
3
5
12" (305 mm)
3
3
14" (356 mm)
2
2
22" (559 mm)
Maximum
Typical
Spool
Wire
Width Length
5-3/8" (137 mm) 500 ft. (152 m)
8" (203 mm) 500 ft. (152 m)
16-3/8" (416 mm) 2,500 ft. (762 m)
16-3/8" (416 mm) 2,500 ft. (762 m)
16-3/8" (416 mm) 1,000 ft. (305 m)
Wire Cart
• Large capacity, excellent for storing, transporting or feeding wire.
• Save space, use and store vertically or horizontally.
• Five (5) strong reel axles with spring clip retainers plus
two (2) positions for axle
storage allows you to configure for large reels with no loose parts.
• Strong, yet lightweight, tubular steel welded construction with rugged
8" (203 mm) wheels.
• Built-in wire guide for horizontal dispensing.
• Will pass through a 28" (711 mm) opening.
Cat. No.
UPC No.
Description
911
31523
50303
31518
31523
50303
Wire Cart
Reel Shaft for 911 Wire Cart
Hitch Clip
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Storage & Handling
• Heavy-duty wheels for durability and easy transporting.
• Dual heavy-duty wire guides for dispensing multiple wires in all directions.
• Only 23" (584 mm) wide to fit through narrow doorways.
• Comes with five 5/8" (16 mm) diameter reel spindles for storing and
dispensing up to fifteen spools of #14 THHN wire.
• Storage space for three (3) spindles and clips eliminates loose parts
when they are not in use.
• Expander kit available to increase capacity by 60%.
Capacity
422
Weight
SPECIFICATIONS
Size
54-1/2" (1384 mm) L x 27" (685 mm) W x 26-1/2" (673 mm) H
when horizontal
Six (6) 2,500' (762 m) spools up to 16" (406 mm) in diameter
Fifteen (15) 500' (152 m) spools up to 8" (203 mm) in diameter
Max. Spool Weight: 550 lbs.
Maximum Spool Width: 24" (610 mm)
62 lbs. (28 kg)
www.greenlee.com
Cable Reel Transporter
• All steel welded frame with heavy-duty wheels.
• Unique design provides easy setup for cable payout.
• Handle folds to save space when using as a dispenser.
916
Cat. No.
UPC No.
Description
916
33035
52466
32935
33035
52466
Cable Reel Transporter
Spindle for 916 Transporter
Wheel Kit (2)
Size
63" (1600 mm) L x 29-7/8" (759 mm) W x 26-3/4" (679 mm) H
when horizontal
Reels of cable or BX up to 20" (508 mm) W and 40" (1016 mm)
in diameter maximum total reel weight 300 lbs. (136 kg)
110 lbs. (50 kg)
Capacity
Weight
Conduit and Pipe Storage Rack
• 7 individual bins allow you to sort by size and type.
• Folds down for storage.
• No. 603 Casters included.
Cat. No.
UPC No.
Description
668
503
603
15343
28044
23405
Mobile Conduit and Pipe Rack with 603 casters
6" (152 mm) Diameter Caster Set, 4 Swivel
6" (152 mm) Diameter Caster Set, 2 Swivel and 2 Rigid
Storage & Handling
SPECIFICATIONS
SPECIFICATIONS
Capacity
Dimensions
36745
02182
36745
02182
Pipe Cart
Wheel Replacement Kit (1)
SPECIFICATIONS
Capacity
20" (508 mm) Diameter − 1000 lbs. (454 kg)
423
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Description
CANADA
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Easy, one-person operation saves time and money.
• Move standard 20 ft. (6.1 m) lengths of pipe.
• Large 4.80" x 8" (122 mm x 203 mm) wheels with 4-ply pneumatic tires.
• Heavy-duty steel construction for long service life.
USA
Pipe Cart
Tel: 800.435.0786
Fax: 800.451.2632
Folded Down
Weight
1000 lbs. (454 kg)
58-1/2" (1486 mm) long × 34" (864 mm) wide × 63-1/2" (1613 mm)
high
58-1/2" (1486 mm) long × 34" (864 mm) wide × 19" (483 mm) high
113 lbs. (51 kg)
MADE FOR THE TRADE!™
BX-Armored Coiled Cable Dispenser
Storage & Handling
• Dispense armored cable, flexible conduit, Greenfield® or NM-B cable
fast and easy without twists or tangles.
• Base with adjustable tension control rotates to dispense the cable
without overpulling.
• Large pulling eye rotates freely and can be used as a carrying handle
when the dispenser is empty.
Cat. No.
UPC No.
Description
37218
37218
Armored Cable Dispenser
SPECIFICATIONS
Size
Capacity
13-1/2" (343 mm) H x 26" (660 mm) diameter
One 250' (76 m) coil of 14/2, 14/3, 12/2, or 12/3 armored
cable or romex.
32 lbs. (14 kg)
Weight
Armored Coiled Cable Dispenser/Transporter
• Dispense one (1) coil of armored cable, flexible conduit,
Greenfield® or NM-B cable fast and easy without twists or tangles.
• Base with adjustable tension control rotates to dispense the cable
without overpulling.
• Large pulling eye rotates freely.
• Transport up to three coils.
Cat. No.
UPC No.
Description
37202
37202
Armored Cable Dispenser/Transporter
INTERNATIONAL
CANADA
45" (1143 mm) H x 28-1/2" (724 mm) W x 29" (736 mm) D
Dispense - One 250' (76.2 m) coil of 14/2, 14/3, 12/2, or 12/3
armored cable or romex.
Transport - Three (3) Coils, maximum capacity 250 lbs. (113 kg).
55 lbs. (25 kg)
Weight
Caddy Basket Cable Dispenser
Tel: 800.435.0786
Fax: 800.524.2853
USA
Size
Capacity
STUD MOUNT CADDY (9525F)
• Fits both 2x4 and 2x6 studs.
• Dispense coils of NM-B or armored cable.
• Swivel eyelet eliminates tangles.
• Add 9529F basket to double capacity.
• Folds for easy storage.
Tel: 800.435.0786
Fax: 800.451.2632
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
Cat. No.
9525F
424
9525F
UPC No.
02070
Description
Folding Stud Mount Caddy
SPECIFICATIONS
9525F
Maximum Capacity 100 lbs. (45.4 kg)
Weight 10.5 lbs. (4.8 kg)
Size 29-1/2" (749 mm) H x 20-3/4"
(527 mm) W
www.greenlee.com
Hanging Cable Dispenser
• Hangs virtually anywhere
• Rugged aluminum, steel, and nylon construction
• Quick set-up and take down
• Collapses for easy storage
• Storage bag included
Cat. No.
UPC No.
Description
9522
12671
Hanging Cable Dispenser
Length Set Up
Width Set Up
Capacity
Weight
37-1/2" (953 mm)
23-1/2" (597 mm)
250' of NM or MC cable up to 75 lb
3-1/2 lbs. (1.6 kg)
Screw-Type Reel Stands
• Wide, welded steel base for added stability with 5/8" holes.
• Roller bearings fit in the spindle groove to keep the spindle in place
and turning freely.
• Two stands and a spindle are required for a complete setup.
683
687
Cat. No.
UPC No.
Description
683
687
684
647
25591
15372
17076
15375
15321
25591
Reel Stand 22" - 54" (559 - 1372 mm)
Reel Stand 13" - 28" (330 - 711 mm)
Spindle for 683 Reel Stand
Spindle for 687 Reel Stand
Stop Pin (683 - 2; 687 - 1)
Storage & Handling
SPECIFICATIONS
SPECIFICATIONS
Capacity
Weight
Description
21979
21980
30291
Ratchet Reel Stand 28" - 46-5/8" (711 mm - 1184 mm)
Spindle for 656 Reel Stand
Handle with Grip
SPECIFICATIONS
Size
Capacity
Weight
= new product
= Replacement Part
= Accessory
24-1/2" × 23" (622 mm × 584 mm) base;
46-5/8" (1184 mm) maximum height
3,750 lbs. (1701 kg) each
58" - 90" (1473 mm - 2286 mm) reel diameter
87 lbs. (39 kg)
425
INTERNATIONAL
UPC No.
656
657
30291
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cat. No.
CANADA
• Ratchet mechanism to easily raise or lower the height.
• Roller bearings fit in the spindle groove to keep the spindle in place
and turning freely.
• Two stands and a spindle are required for a complete setup.
Tel: 800.435.0786
Fax: 800.524.2853
Ratchet-Type Reel Stand
Tel: 800.435.0786
Fax: 800.451.2632
683 - 24" × 21" (610 × 533 mm) base;
54" (1372 mm) maximum height
687 - 15" × 15" (381 × 381 mm) base;
28" (711 mm) maximum height
683 - 2,500 lbs. (1134 kg) each,
46" - 96" (1168 × 2438 mm) reel diameter
687 - 2,500 lbs. (1134 kg) each,
28" - 56" (711 × 1422 mm) reel diameter
683 - 42 lbs. (19 kg)
687 - 22 lbs. (10 kg)
USA
Size
MADE FOR THE TRADE!™
Reel Stand Spindles
• Steel spindles with grooves to fit reel stand rollers.
SPECIFICATIONS
Size
647 - 2-3/8" diameter x 62" (60 x 1575 mm)
657 - 3-1/2" diameter x 100" (89 x 2540 mm)
684 - 2-3/8" diameter x 76" (60 x 1930 mm)
647 - 5,000 lbs. (2268 kg) 59" (1500 mm) between grooves
657 - 7,500 lbs. (2388 kg) 94" (2540 mm) between grooves
684 - 5,000 lbs. (2268 kg) 73" (1854 mm) between grooves
647 - 42 lbs. (19 kg)
657 - 124 lbs. (56 kg)
684 - 50 lbs. (23 kg)
Storage & Handling
Capacity
Cat. No.
UPC No.
Description
647
657
684
15321
21980
15375
Spindle for 687 Reel Stand
Spindle for 656 Reel Stand (only)
Spindle for 683 Reel Stand
Weight
Reel Rollers
• Heavy-duty welded steel construction.
• Built-in loading ramps.
• Adjustable to various reel widths and diameters. (21" dia. min.)
• Roller locks for unloading.
• Side ball rollers for centering.
• Fast, convenient ground-level setup for paying out large cable reels.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
39660
426
Cat. No.
UPC No.
Description
39660
39661
39664
39666
39660
39661
39664
39666
Reel Roller, single platform roller
Reel Roller, single (two required)
Spreader Kit, two 48" spreader bars
Reel Roller Kit, (includes two 39661 rollers and
one 39664 spreader kit)
SPECIFICATIONS
Size
39666
Capacity
39660 - 32" (813 mm) L × 34" (864 mm) W, 87 lbs. (39 kg)
39661 - 32" (813 mm) L × 11" (279 mm) W, 45 lbs. (20 kg)
39664 - 48" (1067 mm) L, 9 lbs. (4 kg)
39666 - 32" (813 mm) L × 48" (1219 mm) W, 99 lbs. (45 kg)
39660 - 2,500 lbs. (1134 kg) 30" (762 mm) max reel width
39661 - 2,000 lbs. (902 kg) per pair, 42" (1067 mm) max reel width
39666 - 2,000 lbs. (902 kg) 42" (1067 mm) max reel width
Testing & Measurement
Greenlee is the leader in electrical testing and
measurment – and has been for more than fifteen
years. Our innovative products are designed
to withstand the rigorous tasks and harsh
elements known to be found on the jobsite.
This means with Greenlee, you have
tough and reliable tools that make
your job faster, safer and easier.
Contents
Electrical Testers
Multimeters
Multimeter Accessories
Clamp-On Meters
Circuit Tracing
Sensors & Scanners
Locators
Basic Electrical Kits
Circuit Verifying
Insulation Testing
Motor Rotation & Phase Sequence
Temperature
Specialty Testers
Accessories
359
363
371
373
383
386
388
392
392
394
395
397
398
400
MADE FOR THE TRADE!™
MADE FOR THE TRADE!™
Meeting today’s stringent safety standards is essential.
Greenlee’s certification of selected instruments to both the most recent IEC and UL requirements brings you assurance of the
highest level of protection currently available.
Testing & Measurement
What you should know about Measurement Category ratings.
IEC Category standards specify protection levels that are far above a system’s rated capacity. Without this additional protection,
transient overvoltages, which are becoming increasingly common, can lead to serious injury or death.
Measurement Category I is the signal level for telecommunications and electronic equipment.
Measurement Category II is the local level for fixed or nonfixed powered devices – everything from lighting to appliances to
office equipment such as copiers. May also be used in Category I areas.
Measurement Category III is the distribution level – fixed primary feeders or branch circuits. These circuits are usually
separated from Category IV (whether utility service or other high-voltage source) by a minimum of one level of transformer
isolation. May also be used in Category II and Category I areas.
Measurement Category IV is the primary supply level. Greenlee is leading the way in offering protection certified to conform
with the highest level of protection as specified by UL & IEC standards. May be used in all Category environments.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Greenlee Instruments – Independently tested
and certified to meet the standards.
358
Throughout this catalog, you’ll see Category
designations for many Greenlee instruments
indicating that they comply with UL & IEC
Category II, III, IV. All of these designations
reflect third-party testing by independent
testing organizations such as UL and TUV –
added assurance for you. While there is no
requirement for independent verification, we
believe you deserve it.
Get the right protection for the job.
Wherever you need overvoltage protection,
choose at least the rating appropriate to the
type of work you expect to be doing. If you
have any questions on using Greenlee test
instruments to help ensure user safety, please
contact Greenlee.
www.greenlee.com
ELECTRICAL TESTERS
Electrical Testers Comparison Guide
2010
GT-16
GT-12
gt-15
1000
1000
1000
90
•
•
•
•
•
LED
LED
LED
III, 1000V IV, 1000V IV, 1000V
•
•
•
•
•
•
•
LED
III, 300V
•
•
GT-95 Voltage Tester
•
•
•
•
AC/DC voltage and polarity measurement.
LCD and dual color LEDs for convenience.
Selectable SHAKER feature when measuring AC voltage.
Overvoltage warning gives user visual notification that voltage levels have
exceeded 1000V AC/ 380V DC.
• Auto-hold automatically activates when tester is removed from voltage reading.
• Continuity test and single probe detection of live conductors for added flexibility.
• Safe, non-contact voltage detection.
• GFCI test capability eliminates the need for additional testers.
• Visual and audible continuity.
• Accessories included: (2) 1.5V AAA batteries, test leads and carrying case
• Lifetime Limited Warranty.
LISTED
Description
GT-95
TSG-3
TC-5
09027
12034
07588
Voltage Tester, LCD & GFCI
Sure-Grip Test Leads
Carrying Case
SPECIFICATIONS
LISTED
UPC No.
Description
GT-65
TSG-3
09025
12034
Voltage Tester
Sure-Grip Test Leads
SPECIFICATIONS
= new product
= Replacement Part
= Accessory
Voltage Detection
Continuity Verification
Frequency
Measurement Category
19 to 1000V AC, 5 to 1000V DC
0 to 50 kΩ
DC, 45-65 Hz
CAT IV, 600V; CAT III, 1000V
359
INTERNATIONAL
CAT. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• AC/DC voltage and polarity measurement.
• Continuity test and single probe detection of live conductors for added flexibility.
• Overvoltage warning gives user visual notification that voltage levels have
exceeded 1000V AC/ 380V DC.
• Safe, non-contact voltage detection.
• Auto-hold automatically activates when tester is removed from voltage reading.
• Visual and audible continuity.
• Accessories included: (2) 1.5V AAA batteries and test leads
• Lifetime Limited Warranty.
CANADA
19 to 1000V AC, 5 to 1000V DC
0 to 50 kΩ
DC, 45-65 Hz
7.5 mA nominal at 120V AC
CAT IV, 600V; CAT III, 1000V
Tel: 800.435.0786
Fax: 800.524.2853
GT-65 Voltage Tester
Voltage Detection
Continuity Verification
Frequency
GFCI
Measurement Category
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
CAT. No.
Testing & Measurement
FEATURE
GT-95
Gt-65
GT-540 gt-220 CSJ-100 CMT-90 CMT-80
VDC (V max)
1000
1000
1000
1000
1000
1000
600
VAC (V max)
1000
1000
1000
1000
1000
1000
600
AAC (A max)
200
600
400
Continuity and beeper
•
•
•
•
•
•
•
Resistance
•
•
•
•
•
Data hold
•
•
•
•
•
GFCI test
•
Non-contact voltage detection •
•
•
•
Adjustable sensitivity
Display type
Digital
LED
Digital
Digital
Digital
Digital
Digital
Measurement Category
IV, 600V IV, 600V IV, 1000V IV, 1000V IV, 600V IV, 600V III, 600V
III, 1000V III, 1000V
III, 1000V III, 1000V
UL/cUL
•
•
•
•
•
•
•
CE
•
•
•
•
•
•
•
MADE FOR THE TRADE!™
Electrical Tester
Testing & Measurement
LISTED
GT-540
GT-540
GT-220 features:
• Hassle-free, automatic measurement of voltage and resistance.
• Low impedance eliminates stray or “ghost” voltage readings.
• AC/DC voltage measurements.
• Autoranging for quick, convenient measurements.
• Non-contact voltage detection for identifying live lines without contacting
conductors.
• Auto off for longer battery life.
• Low battery indicator.
• Resistance measurement.
• Audible continuity test.
• Data hold to capture measurements.
• U.S. Patent D491,084.
• Accessories included: (1) 9V battery, test leads and carrying case.
• Lifetime Limited Warranty.
GT-540 also features:
• High impedance AC/DC voltage measurement capability for load-sensitive circuits.
• Capacitance measurement.
• Diode test.
• Low resistance range with fast continuity test.
• Enhanced accuracy.
• Auto and manual range selection.
CAT. No.
UPC No.
Description
GT-540
GT-220
TSG-3
TC-40
07749
07748
12034
19216
Multifunction Electrical Tester
Electrical Tester
Sure-Grip Test Leads
Carrying Case
SPECIFICATIONS
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
GT-220
360
AC Open Jaw Clamp Meter
LISTED
Voltage Measurement
Resistance Measurement
Capacitance
Display
Measurement Category
6.000, 60.00, 600.0, 1000V
6.0, 60.00, 600.0kΩ; 6.000 MΩ
100.0, 1000.0 nF; 10.00, 100.0, 2000 µF
6000-count LCD
CAT IV, 1000V
• AC amperage, AC/DC voltage measurement.
• Open jaw design eases AC current measurement.
• Slim profile with build-in probe storage on back.
• Measures resistance up to 20MΩ.
• Audible continuity and diode test.
• Bright LED and audible alarm for non-contact voltage detection.
• Auto power off for longer battery life.
• Data hold to capture measurements.
• 2000 count LCD.
• Accessories included: (2) 1.5V AAA batteries, test leads and carrying case.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
CSJ-100
11372
TC-5
87136
11372
07588
Clamp, Open Jaw
Test Leads
Carrying Case
SPECIFICATIONS
Amperage Measurement
Voltage Measurement Range
Resistance Measurement
Display
Jaw Opening
Measurement Category
200.0 AC
200.0, 1000V
200.0Ω; 2.000, 20.00, 200.0 KΩ; 2.000, 20.00 MΩ
2000-count LCD
0.63" (16mm)
CAT IV 600V, CAT III 1000V
www.greenlee.com
Automatic Electrical Tester
LISTED
CAT. No.
UPC No.
Description
CMT-90
TSG-3
TC-10
12123
12034
07534
Electrical Tester, 1000V, 600A
Test Leads
Carrying case
SPECIFICATIONS
Automatic Electrical Tester
Amperage Measurement
Voltage Measurement
Resistance
Display
Jaw Opening
Measurement Category
•
•
•
•
•
•
•
•
LISTED
AC A 0.6 to 600.0
AC V: 1.3 to 999.9; DC V; 1.8 to 999.9; -0.6 to -999.9
2000Ω
10,000-count LCD
1.34" (34 mm)
CAT IV, 600 V; CAT III, 1000 V
Hassle-free, automatic measurement of amperage, voltage, and resistance.
Low impedance eliminates stray or “ghost” voltage readings.
Compact design for measuring in tight spaces.
400A AC, 600V AC/DC measurement.
Data hold to capture important readings.
Auto off for longer battery life.
Accessories included: (1) 9 V battery, test leads, carrying case.
Lifetime Limited Warranty.
Description
07735
11372
07588
Electrical Tester
Test Leads
Carrying case
LISTED
UPC No.
Description
2010
34470
Touchless AC Voltage Indicator
SPECIFICATIONS
Voltage Measurement
Frequency
Measurement Category
= new product
= Replacement Part
= Accessory
AC V 24-1000
50-500Hz
CAT III, 1000V
361
INTERNATIONAL
CAT. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Bright LED and audible alarm if voltage is present.
• Fast, easy, non-contact voltage detection.
• Adjustable sensitivity.
• Identifies hot and neutral conductors.
• Checks individual breakers for power.
• Accessories included: (1) 9V battery.
• Lifetime Limited Warranty.
CANADA
0.6 - 400.0A AC
AC V: 1.3-600.0V; DC V: 1.8-600.0; -0.6 to -600.0V
2000Ω with continuity beeper
6000-count LCD
1.06" (27 mm)
CAT III, 600V
Tel: 800.435.0786
Fax: 800.524.2853
Amperage Measurement
Voltage Measurement
Resistance
Display
Jaw Opening
Measurement Category
USA
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
CAT. No.
CMT-80
11372
TC-5
SPECIFICATIONS
Touchless AC Voltage Indicator
Testing & Measurement
• Hassle-free, automatic measurement of amperage, voltage and resistance.
• Low impedance eliminates stray or “ghost” voltage readings.
• True RMS for the most accurate measurement when harmonics are present.
• High resolution, auto-illuminating LCD backlit display.
• Auto off for longer battery life.
• Resistance measurement.
• Audible continuity test.
• Data hold to capture measurements.
• Accessories included: (1) 9 V battery, test leads and carrying case.
• Lifetime Limited Warranty.
MADE FOR THE TRADE!™
Adjustable Non-Contact Voltage Detector
• Adjustable to safely detect power and low voltage.
• Safely detects AC voltage without touching the bare conductor.
• Adjustable for use on power wiring plus lighting, thermostats and other low
voltage circuits.
• Use to detect voltage in outlets, lighting fixtures, wires and cables.
• Finds breaks in wires.
• Identifies hot and neutral conductors.
• Low battery indication.
• Accessories included: (1) 1.5V AAA battery.
• Lifetime Limited Warranty.
Testing & Measurement
LISTED
INTERNATIONAL
Description
GT-16
12727
Adjustable Non-Contact Voltage Detector
Voltage Detection:
Frequency:
Measurement Category:
AC V 5-1000
50-500Hz
CAT IV, 1000V
Non-Contact Self Testing Voltage Detector
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
UPC No.
SPECIFICATIONS
LISTED
362
CAT. No.
• Designed and assembled in USA.
• Automatic self-test verifies the integrity of the unit.
• Bright LEDs and audible alarm sound if voltage is present.
• Silent-mode feature for use in quiet settings.
• Safe, non-contact voltage detection.
• Use to detect voltage in outlets, lighting fixtures, circuit breakers, wires, and
cables or to find a break in a wire.
• Automatically turns off after five minutes of non-use to conserve battery life.
• Low battery indicator.
• (2) 1.5V AAA batteries included.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
GT-12
20947
Non-Contact Self-Testing Voltage Detector
SPECIFICATIONS
Voltage Detection:
Frequency:
Measurement Category:
AC V 50-1000
50-500Hz
CAT IV, 1000V
Non-Contact Low Voltage Detector
LISTED
• Use to detect voltage in low voltage applications ranging from 12-90 volts AC.
• Safe, non-contact voltage detection.
• Bright LED and audible alarm if voltage is present.
• ON/OFF switch for longer battery life.
• Convenient pen-size device easily fits into pockets or tool pouches.
• Accessories included: (2) 1.5 V AAA batteries.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
GT-15
09023
Non-Contact Low Voltage Detector
SPECIFICATIONS
Voltage Detection:
Frequency:
Measurement Category:
12-90VAC
50-500Hz
CAT III, 300V
www.greenlee.com
MULTIMETERS
DMM Comparison Guide
FEATURE
DML-430A
DM-860
DM-830A
DM-820A
DM-810A
DM-510A
True RMS
AC+DC
AC+DC
AC+DC
•
•
•
DM-210A
DM-200A
10
10
10
10
10
8
8
8
Maximum resolution (μA)
0.1
0.01
0.1
0.1
0.1
0.1
0.1
0.1
Best accuracy (%)
0.2
0.1
0.2
0.2
0.2
0.5
0.5
0.5
ACA (A max)
10
10
10
10
10
8
8
8
Maximum resolution (μA)
0.1
0.01
0.1
0.1
0.1
0.1
0.1
0.1
Best accuracy (%)
DCV (V max)
0.6
0.5
0.6
0.6
0.6
1.0
1.0
1.0
1000
1000
1000
1000
1000
1000
1000
1000
Maximum resolution (μV)
10
1
10
10
10
10
10
10
Best accuracy (%)
0.06
0.02
0.06
0.06
0.06
0.2
0.2
0.2
ACV (V max)
1000
1000
1000
1000
1000
1000
1000
1000
Maximum resolution (μV)
10
10
10
10
10
10
10
10
Best accuracy (%)
0.5
0.3
0.5
0.5
0.5
1.0
1.0
1.0
Resistance (MΩ)
60
50
60
60
60
60
60
60
Maximum resolution (mΩ)
100
10
100
100
100
100
100
100
Best accuracy (%)
0.1
0.07
0.1
0.1
0.1
0.5
0.5
0.5
•
•
Conductance
•
Continuity and beeper
•
•
•
•
•
•
•
•
Diode Test
•
•
•
•
•
•
•
•
Capacitance
•
•
•
•
•
•
•
Frequency
•
•
•
•
•
•
•
•
40-500
20-100k
40-500
40-500
40-500
50-400
50-400
50-400
Frequency Response (Hz)
Temperature measurement
Dual
Single
Single
Single
Dual Digital
Dual Digital
Dual Digital
Digital
Digital
Digital
10,000
50,000/500,000
10,000
10,000
10,000
6,000
6,000
6,000
Backlight
•
•
•
•
•
•
•
•
Display update X/sec
5
5
5
5
5
5
5
5
Analog bar graph segments
41
42
41
41
41
24
24
24
Display counts
Analog update X/sec
60
60
60
60
60
40
40
40
Computer Interface
USB
RS-232
USB
USB
USB
USB, RS-232
USB, RS-232
USB, RS-232
Auto and manual ranging
•
•
•
•
•
•
•
•
Intelligent Auto Power Off
•
•
•
•
•
•
•
Auto Power Off
Non-Contact Voltage Detection
•
•
•
•
Peak (crest) Hold - Max, Min
•
•
•
•
Data Hold
Max/Min/Avg
•
•
•
•
•
max, min
•
•
•
•
•
•
Process loop measurement
•
•
•
•
•
•
•
•
max, min
Relative offset mode ( Δ )
•
•
•
•
•
•
•
max, min
•
•
43,000
Duty cycle
•
•
•
•
•
IV, 1000
IV, 600V
III, 1000V
IV, 1000
IV, 1000
IV, 1000
IV, 300
III, 600
II, 1000
IV, 300
III, 600
II, 1000
IV, 300
III, 600
II, 1000
UL
•
•
•
•
•
•
•
•
cUL or CSA
•
•
•
•
•
•
•
•
CE
•
•
•
•
•
•
•
•
Measurement Category Rating
= new product
= Replacement Part
= Accessory
363
INTERNATIONAL
87,000
Data logging (points stored, dual channel)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Data logging (points stored, single channel)
CANADA
•
•
•
Tel: 800.435.0786
Fax: 800.524.2853
Low Impedance AutoCheck™ mode
Beep-Jack™ Input error warning
•
•
USA
Dual
Digital
Tel: 800.435.0786
Fax: 800.451.2632
Dual
Dual Digital
Display Type
Testing & Measurement
DCA (A max)
MADE FOR THE TRADE!™
DMM Comparison Guide
Testing & Measurement
FEATURE
DM-310 DM-300
DM-60
DM-40
DM-20 PDMM-20
AM-6
200mA
200mA
500mA
•
•
DCA (A max)
10
10
Maximum resolution (µA)
0.1
1000
1000
0.1
10
1
Best accuracy (%)
0.9
0.9
0.9
1.0
1.5
2.5
•
10 10
ACA (A max)
10
10
10
10
Maximum resolution (µA)
0.1
1000
1000
0.1
Best accuracy (%)
1.2
1.2
DCV (V max)
1000
1000
1000
1000
600
600
300
450
Maximum resolution (µV)
100
100
100
100
100
100
100
1000
Best accuracy (%)
0.5
0.5
0.5
0.5
0.5
0.8
1.2
0.5
ACV (V max)
1000
1000
1000
1000
600
600
300
450
Maximum resolution (µV)
100
100
100
100
100
0.1V
0.1V
1000
Best accuracy (%)
1.0
1.0
1.0
1.0
1.0
1.2
1.5
1.5
Resistance (MΩ)
60
60
60
60
20
20
2
6
Maximum resolution (mΩ)
100
100
100
100
100
100
100
1000
Best accuracy (%)
0.7
0.7
0.7
0.7
0.8
0.8
1.5
1.0
1.2
1.0
Continuity and beeper
•
•
•
•
•
•
•
•
Diode test
•
•
•
•
•
•
•
Capacitance
•
•
•
300
300
1
Conductivity
Frequency response (Hz)
•
•
•
•
50-500
50-500
50-500
50-500
•
40-400
40-400
•
•
45-400
50-60
Temperature measurement
Single
Display type
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Display counts
6000
6000
6000
6000
2000
2000
2000
6000
2.5
5
Backlight
•
Display update X/sec
5
5
5
5
2.5
Analog
•
2.5
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Analog bar graph
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
DM-330
True RMS
Frequency
CANADA
DM-350
Analog update X/sec
Computer interface
Auto and manual ranging
•
•
•
•
Intelligent Auto power off
•
•
•
•
•
•
•
•
•
•
Low Impedance AutoCheck™ mode
•
Auto power off
Non-contact voltage detection
Beep-Jack™ Input error warning
•
•
•
Peak (crest) Hold - Max, Min
Data hold
Min/Max/Avg
•
•
•
•
•
min,
min,
min,
min,
max only
•
max only max only max only max only
Relative offset mode ( Δ )
USA
Tel: 800.435.0786
Fax: 800.451.2632
Process loop measurement
364
Data logging (points stored, single channel)
Data logging (points stored, dual channel)
Duty cycle
Measurement Category Rating
IV, 600V IV, 600V IV, 600V IV, 600V
III, 1000V III, 1000V III, 1000V III, 1000V
III, 300V
II, 600V
III, 300V II, 300V
II, 600V
III, 300V
II, 450V
II, 300V
UL
•
•
•
•
•
•
•
•
•
cUL or CSA
•
•
•
•
•
•
•
•
•
CE
•
•
•
•
•
•
•
•
www.greenlee.com
ESM™ Digital Logging Meter
LISTED
CAT. No.
UPC No.
Description
DML-430A
DML-430A-C*
TC-20
TSG-3
TPB
08746
35771*
07535
12034
07592
Digital Logging Meter (43,000 data points)
Digital Logging Meter (43,000 data points)
Carrying Case (included)
Sure-Grip Test Leads
Bead Temperature Probe
* Includes Certificate of Calibration
FEATURING:
SPECIFICATIONS
Voltage Measurement
Amperage Measurement
Resistance
Conductance
Capacitance
Frequency
Temperature
Measurement Category
60.00, 600.0 mV; 9.999, 99.99, 999.9 V
600.0, 6000μA; 60.00, 600.0mA; 6.000, 10.00A
600.0Ω; 6.000, 60.00, 600.0 kΩ; 6.000, 60.00 MΩ
99.99nS
60.00, 600.0nF; 6.000, 60.00, 600.0μF; 6.000, 25.00 mF
15Hz-50kHz sine wave; 5Hz-1MHz logic level square wave
K type, -58 to 1832 °F (-50 to 1000 °C)
CAT IV, 1000V
Testing & Measurement
• Datalogging capability – stores 87,000 single-channel or 43,000 dual-channel
measurements. Use optional USB interface DMSC-9U to transfer data to PC or for
direct-to-PC logging.
• AC+DC True RMS gives accurate readings on complex waveforms
• Low impedance AutoCheck™ mode – automatically selects AC or DC volts, resistance or
continuity. Low impedance masks “ghost” voltage pickup.
• Backlit LCD displays 2 readings with 10,000 count resolution
• BeepJack™ warns when test leads are incorrectly inserted in current measurement
terminals
• Measures voltage, current, resistance, conductance, frequency and capacitance..
• Checks continuity and tests diodes
• Two temperature measurements using type K thermocouples
• Accessories included: (1) 9V battery, bead temperature probe (400°F / 204°C max.),
test leads, protective boot, carrying case.
• Lifetime Limited Warranty.
Industrial 500,000-Count Digital Multimeter
SPECIFICATIONS
= new product
= Replacement Part
= Accessory
Voltage Measurement
Amperage Measurement
Resistance
Capacitance
Frequency
Temperature
Measurement Category
500.00mV; 5.0000, 50.000, 500.00, 1000.0V
500.00, 5000.0µA; 50.000, 500.00mA; 5.0000, 10.000A
500.00Ω; 5.0000, 50.000, 500.00kΩ; 5.0000, 50.000MΩ
50.00; 500.0nF; 5.000, 50.00, 500.0, 9999µF
5Hz-200kHz sine wave; 5Hz-2MHz logic level square wave
K type, -58°F to 1832°F (-50°C to 1000°C)
CAT IV, 600V; CAT III, 1000V
365
INTERNATIONAL
Industrial 500,000-Count Digital Mulitmeter
Industrial 500,000-Count Digital Multimeter
Carrying Case (included)
Sure-Grip Test Leads
Bead Temperature Probe
CANADA
Description
07797
07658
07535
12034
07592
Tel: +1.815.397.7070
Fax: +1.815.397.9247
UPC No.
DM-860
DM-860-C
TC-20
TSG-3
TPB
Tel: 800.435.0786
Fax: 800.524.2853
CAT. No.
USA
LISTED
Tel: 800.435.0786
Fax: 800.451.2632
True RMS, 5-5/6-digit, 500,000-count display for greater accuracy.
Audible input alert helps avoid damage to meter.
Record max, min, and max-min and data hold.
Crest capture (peak hold) max, min and max-min readings.
Relative offset display mode makes monitoring relative measurement
changes simple.
• Performs frequency, temperature and capacitance measurements,
plus diode and continuity tests.
• Measures temperatures up to 1832°F.
• Autoranging for convenient operation – and to save you time.
• 42-segment analog bar graph display capability makes it easy to view quick changes.
• Bright, backlit display is easy to read under any light condition.
• RS-232 capable, may be connected to a PC for extended measurement
capability with optional interface DMSC-9.
• Accessories included: (1) 9V battery, bead temperature probe
(400°F/ 204°C max.), test leads, protective boot, carrying case.
• Lifetime Limited Warranty.
•
•
•
•
•
MADE FOR THE TRADE!™
ESM™ Series Digital Multimeters
DM-810A features:
• True RMS for no-compromise accuracy
• Measures voltage, current, resistance, capacitance and frequency.
• Tests continuity and diodes.
• Backlit LCD with dual 10,000 count displays
• BeepJack™ warns when test leads are incorrectly inserted in current
measurement terminals
• Automatic and manual range selection
• Relative offset mode to see changes in measurements
• Data hold
• Use optional USB interface DMSC-9U for direct-to-PC logging.
• Lifetime Limited Warranty
INTERNATIONAL
CANADA
DM-820A also features:
• Crest capture (peak hold) plus recording of max, min, max-min
and average
• Two voltage detection modes – non-contact or using a single test lead
• One temperature measurement using a type K thermocouple
• Conductance measurement
FEATURING:
DM-830A has all DM-810A features plus:
• AC+DC True RMS gives accurate readings on complex waveforms
• Low impedance AutoCheck™ mode – automatically selects AC or DC
volts, resistance or continuity. Low impedance masks “ghost” voltage
pickup.
• dBm function with 20 selectable reference impedance values
• Crest capture (peak hold) plus recording of max, min, max-min and
average
• Two voltage detection modes – non-contact or using a single test lead
• Two temperature measurements using type K thermocouples
• Conductance measurement
DM-830A
Accessories included: (1) 9V battery, bead temperature probe
(DM-820A, DM-830A only, 400°F/204°C max), test leads, protective
boot, carrying case.
DM-820A
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Testing & Measurement
LISTED
USA
Tel: 800.435.0786
Fax: 800.451.2632
UPC No. Description
DM-830A
DM-830A-C*
DM-820A
DM-820A-C*
DM-810A
DM-810A-C*
TC-20
TSG-3
TPB
08745
35770*
08744
35760*
08743
35759*
07535
12034
07592
Digital Multimeter
Digital Multimeter
Digital Multimeter
Digital Multimeter
Digital Multimeter
Digital Multimeter
Carrying Case
Sure-Grip Test Leads
Bead Temperature Probe (included with DM-820A, DM-830A)
* Includes Certificate of Calibration
SPECIFICATIONS
DM-810A
366
CAT. No.
Voltage Measurement
Amperage Measurement
Resistance
Conductance
Capacitance
Frequency
Temperature
Measurement Category
60.00, 600.0 mV; 9.999, 99.99, 999.9 V
600.0, 6000μA; 60.00, 600.0mA; 6.000, 10.00A
600.0Ω; 6.000, 60.00, 600.0 kΩ; 6.000, 60.00 MΩ
99.99nS
60.00, 600.0nF; 6.000, 60.00, 600.0μF; 6.000, 25.00 mF
15Hz-50kHz sine wave; 5Hz-1MHz logic level square wave
K type, -58 to 1832 °F (-50 to 1000 °C)
CAT IV, 1000V
www.greenlee.com
ESM™ Series Digital Multimeters
LISTED
DM-210A also features:
• Measures capacitance
• Measures temperature using a type K thermocouple
DM-510A has all DM-200A features plus:
• True RMS for no-compromise accuracy
• Crest capture (peak hold) plus recording of max, min, max-min and average
• Low impedance AutoCheck™ mode – automatically selects AC or DC volts, resistance or
continuity. Low impedance masks “ghost” voltage pickup.
• Measures capacitance
• Measures temperature using a type K thermocouple
Accessories included: (2) 1.5V AAA batteries, bead temperature probe (DM-210A, DM-510A
only, 400°F/204°C max), test leads, protective boot.
DM-510A
CAT. No.
UPC No.
Description
DM-510A
DM-510A-C*
DM-210A
DM-210A-C*
DM-200A
DM-200A-C*
TSG-3
08742
35758*
08741
35757*
08740
35756*
12034
Professional Plant Digital Multimeter
Professional Plant Digital Multimeter
Digital Multimeter
Digital Multimeter
Digital Multimeter
Digital Multimeter
Sure-Grip Test Leads
Testing & Measurement
DM-200A features:
• Measures voltage, current, resistance and frequency.
• Tests continuity and diodes.
• Backlit LCD with 6,000 count display
• Two voltage detection modes – non-contact or using a single test lead
• BeepJack™ warns when test leads are incorrectly inserted in current measurement terminals
• Automatic and manual range selection
• Relative offset mode to see changes in measurements
• Data hold
• Use optional USB / RS-232 interface DMSC-2U for direct-to-PC logging.
• Lifetime Limited Warranty
* Includes Certificate of Calibration
DM-210A
60.00, 600.0 mV; 6.000, 60.00, 600.0, 1000V
600.0, 6000μA; 60.00, 600.0mA; 6.000, 8.00A
600.0Ω; 6.000, 60.00, 600.0 kΩ; 6.000, 60.00 MΩ
60.00, 600.0nF; 6.000, 60.00, 600.0, 3000μF
10Hz-50kHz sine wave; 5Hz-999.9kHz logic level square wave
K type, -58 to 1832 °F (-50 to 1000 °C)
CAT IV 300V; CAT III 600V; CAT II 1000V
Tel: 800.435.0786
Fax: 800.451.2632
Voltage Measurement
Amperage Measurement
Resistance
Capacitance
Frequency
Temperature
Measurement Category
= Accessory
367
INTERNATIONAL
= Replacement Part
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
DM-200A
USA
SPECIFICATIONS
MADE FOR THE TRADE!™
TRMS Digital Multimeter
LISTED
•
•
•
•
Testing & Measurement
•
•
•
•
•
•
•
•
•
•
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
CAT. No.
UPC No.
Description
DM-350
DM-350-C*
TSG-3
TC-40
11871
22897*
12034
19216
DMM, 1000V 10A RMS BL
DMM, 1000V 10A RMS BL
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance Measurement
Frequency Measurement
Capacitance
Display
Measurement Category
TRMS Digital Multimeter
368
True RMS for no-compromise accuracy when harmonics are present.
Large LCD with backlight for easy viewing.
AC/DC voltage, AC/DC amperage measurement.
Non-contact voltage detection for identifying live lines
without contacting conductors.
Auto shut-off for longer battery life plus low battery indicator.
Resistance measurement.
Audible continuity and diode tests.
Frequency measurement.
Capacitance measurement.
Data hold to capture measurement.
6000-count LCD for high resolution.
Min/Max feature for added versatility.
Audible input alert warns user if leads are in incorrect position.
Lifetime Limited Warranty.
LISTED
•
•
•
•
•
•
•
•
•
•
•
•
•
•
600.0, 2000 μA; 6.000, 10.00 A
600.0 mV; 6.000, 60.00, 600.0, 1000V
600.0 Ω; 6.000, 60.00, 600.0 kΩ; 6.000, 60.00 MΩ
40 Hz minimum, 100 Hz to 60 kHz maximum,
depending on function and range
600.0 nF; 6.000, 60.00, 600.0, 2000 μF
6000-count LCD
CAT IV, 600V; CAT III, 1000V
True RMS for no-compromise accuracy when harmonics are present.
Large LCD for easy viewing.
AC/DC voltage, AC/DC amperage measurement.
Non-contact voltage detection for identifying live lines
without contacting conductors.
Auto shut-off for longer battery life plus low battery indicator.
Resistance measurement.
Audible continuity and diode tests.
Frequency measurement.
Capacitance measurement.
Data hold to capture measurement.
6000-count LCD for high resolution.
Min/Max feature for added versatility.
Audible input alert warns user if leads are in incorrect position.
Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
DM-330
DM-330-C*
TSG-3
TC-40
11870
22895*
12034
19216
DMM, 1000V 10A RMS
DMM, 1000V 10A RMS
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance Measurement
Frequency Measurement
Capacitance
Display
Measurement Category
6.000, 10.00 A
600.0 mV; 6.000, 60.00, 600.0, 1000V
600.0 Ω; 6.000, 60.00, 600.0 kΩ; 6.000, 60.00 MΩ
40 Hz minimum, 100 Hz to 60 kHz maximum,
depending on function and range
600.0 nF; 6.000, 60.00, 600.0, 2000 μF
6000-count LCD
CAT IV, 600V; CAT III, 1000V
www.greenlee.com
Averaging Digital Multimeter
LISTED
CAT. No.
UPC No.
Description
DM-310
DM-310-C*
TSG-3
TC-40
11869
22894*
12034
19216
DMM, 1000V 10A AVG
DMM, 1000V 10A AVG
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance Measurement
Frequency Measurement
Capacitance
Display
Measurement Category
6.000, 10.00 A
600.0 mV; 6.000, 60.00, 600.0, 1000V
600.0 Ω; 6.000, 60.00, 600.0 kΩ; 6.000, 60.00 MΩ
40 Hz minimum, 100 Hz to 60 kHz maximum,
depending on function and range
600.0 nF; 6.000, 60.00, 600.0, 2000 μF
6000-count LCD
CAT IV, 600V; CAT III, 1000V
Testing & Measurement
• Use to measure voltage, resistance, current and continuity.
• Excellent for measuring AC voltage of electrical circuits.
• AC/DC voltage, AC/DC amperage measurement.
• Non-contact voltage detection for identifying live
lines without contacting conductors.
• Auto shut-off for longer battery life plus low battery indicator.
• Resistance measurement.
• Audible continuity and diode tests.
• Frequency measurement.
• Capacitance measurement.
• Data hold to capture measurement.
• 6000-count LCD for high resolution.
• Min/Max feature for added versatility.
• Audible input alert warns user if leads are in incorrect position.
• Lifetime Limited Warranty.
TRMS Digital Multimeter
11868
22893*
12034
19216
DMM, 1000V RMS
DMM, 1000V RMS
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Voltage Measurement
Resistance Measurement
Frequency Measurement
Display
Measurement Category
= new product
= Replacement Part
= Accessory
600.0 mV; 6.000, 60.00, 600.0, 1000V
600.0 Ω; 6.000, 60.00, 600.0 kΩ; 6.000, 60.00 MΩ
40 Hz minimum, 100 Hz to 60 kHz maximum,
depending on function and range
6000-count LCD
CAT IV, 600V; CAT III, 1000V
369
INTERNATIONAL
DM-300
DM-300-C*
TSG-3
TC-40
CANADA
Description
USA
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
CAT. No.
Tel: 800.435.0786
Fax: 800.524.2853
Use to measure voltage, resistance, and continuity.
Excellent for measuring AC voltage of electrical circuits.
AC/DC voltage measurement.
Non-contact voltage detection for identifying
live lines without contacting conductors.
True RMS for the most accurate measurement when harmonics are present.
Auto shut-off for longer battery life.
Low battery indicator.
Resistance measurement.
Audible continuity and diode tests.
Data hold to capture measurement.
Frequency measurement.
6000-count LCD for high resolution.
Min/Max feature for added versatility.
Lifetime Limited Warranty.
Tel: 800.435.0786
Fax: 800.451.2632
LISTED
•
•
•
•
•
•
•
•
•
•
•
•
•
•
MADE FOR THE TRADE!™
Manual Ranging Multimeter
Testing & Measurement
LISTED
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
CAT. No.
UPC No.
Description
DM-60
TSG-3
12040
12034
DMM, 600V AC/DC
Sure-Grip Test Leads
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance Measurement
Frequency Measurement
Measurement Category
Manual Ranging Multimeter
LISTED
370
• A perfect choice for residential and light commercial use.
• Includes elastomer boot to protect meter from damage.
• AC/DC voltage, AC/DC amperage measurement.
• Resistance measurement.
• Audible continuity and diode tests.
• Frequency measurement in voltage mode.
• Data hold to capture measurement.
• Max feature for added versatility.
• Lifetime Limited Warranty.
200.0 µA; 2.000, 20.00, 200.0 mA; 10.00 A
200.0 mV; 2.000, 20.00, 200.0, 600V
200.0 W; 2.000, 20.00, 200.0 kW; 2.000, 20.00 MW
2 k to 10 MHz
CAT III, 300V; CAT II, 600V
• Multi-purpose meter for most electrical needs.
• Includes elastomer boot to protect meter from damage.
• AC/DC voltage, DC amperage measurement.
• Temperature measurement using type K thermocouple.
• Audible continuity and diode tests.
• Tests 1.5V and 9V batteries.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
DM-40
TSG-3
12039
12034
DMM, 600V AC/DC w/ temp
Sure-Grip Test Leads
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance Measurement
Temperature Measurement
Measurement Category
Manual Ranging Multimeter
LISTED
DC A: 20.00, 200.0 mA
AC V: 200.0, 600 V; DC V: 200.0, 2000 mV; 20.00, 200.0, 600 V
200.0, 2000 W,, 20.00, 200.0 kW,; 20.00 MW
-40 to 1832˚ F (-40 to 1000˚ C)
CAT III, 300V; CAT II, 600V
• Use to measure voltage and check batteries.
• Great for measuring current of small electronic circuits.
• Includes elastomer boot to protect meter from damage.
• AC/DC voltage, DC amperage measurement.
• Resistance measurement.
• Audible continuity and diode tests.
• Tests 1.5V and 9V batteries.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
DM-20
12037
DMM, 300V AC/DC
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance Measurement
Measurement Category
DC A: 2000 µA; 20.00, 200.0 mA
AC V: 200.0, 300 V; DC V: 200.0, 2000 mV; 20.00, 200.0, 300 V
200.0, 2000 W; 20.00, 200.0, 2000 kW
CAT II, 300V
www.greenlee.com
PDMM-20 Pocket Multimeter
LISTED
SPECIFICATIONS
Voltage Measurement
Resistance Measurement
Capacitance
Display
Measurement Category
6.000, 60.00, 450.0 V
600.0Ω; 6.000, 60.00, 600.0 kΩ; 6.000 MΩ
100.0, 1000 nF; 10.00, 100.0 µF
6000-count LCD
CAT II, 450 V; CAT III, 300 V
CAT. No.
UPC No.
Description
PDMM-20
11689
Pocket Multimeter
Analog Multimeter
• Easy to read, multi-function display.
• AC/DC voltage, DC amperage measurement.
• Built-in test leads, no loose parts to lose.
• Resistance measurement.
• Tests 1.5 V and 9 V batteries.
• Accessories included: (1) 1.5 V AA battery.
• Lifetime Limited Warranty.
LISTED
SPECIFICATIONS
CAT. No.
UPC No.
Description
AM-6
12725
Analog Multimeter
MULTIMETER ACCESSORIES
Interface Kits
DMSC-2U
35772
DMSC-9U
35773
DMSC-9
07755
For DM-200 and 200A Series and DM-510A
Digital Multimeters
For DM-800A Series and DML-430A Digital
Multimeters
For DM-860 Digital Multimeter
SPECIFICATIONS
Software Requirements
Hardware Requirements
DMSC-2U
DMSC-9
= Replacement Part
= Accessory
Windows 7/Vista/XP/2000/NT4 or Windows ME/98/95
CPU and memory – minimum Windows requirement
Monitor – at least 640 x 480, 800 x 600 recommended.
Hard disk – at least 20 megabytes free space.
Connection – DMSC-9U: free USB port; DMSC-2U: free
USB or 9-pin serial port; DMSC-9: free 9-pin serial port.
371
INTERNATIONAL
Description
CANADA
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
DMSC-9U
See both digital and analog meter readouts onscreen, plus a large, easy-to-read graph of logged
values – in this case, a thermocouple monitoring
air temperature in a forced-air furnace duct.
CAT. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Connects to a PC for data storage and retrieval from Greenlee
digital multimeters.
• Allows retrieval of stored data and real-time logging and
graphing.
• Retrieve stored data log from DML-Series.
• Export data to disk for analysis with any spreadsheet.
• Lifetime Limited Warranty.
USA
DC A: 30, 500 mA
AC V: 15, 50, 150, 300 V; DC V: 5, 15, 50, 150, 300 V
10, 100K W, 1 MW
CAT II, 300V per UL; 61010B-1
Tel: 800.435.0786
Fax: 800.451.2632
Amperage Measurement
Voltage Measurement
Resistance Measurement
Measurement Category
= new product
Testing & Measurement
• Auto-select mode for hassle-free use.
• Low impedance eliminates stray or “ghost” voltage readings.
• AC/DC voltage measurement.
• Hassle-free, automatic measurement of voltage and resistance.
• Autoranging for quick, convenient measurements.
• Non-contact voltage detection for identifying live lines without
contacting conductors.
• Intelligent Auto-Off for longer battery life.
• Low battery indicator.
• Resistance measurement.
• Audible continuity test.
• Frequency measurement in voltage mode.
• Capacitance measurement.
• 6000-count LCD for high resolution.
• Accessories included: (1) 3 V battery (CR2032), carrying case.
• Lifetime Limited Warranty.
MADE FOR THE TRADE!™
MULTIMETER ACCESSORIES
3000A Clamp-on Adapter
Testing & Measurement
LISTED
•
•
•
•
•
•
Flexible clamp for easy “fishing” around a conductor.
3000A AC current measuring accessory.
24" long.
Perfect for any multimeter that reads AC millivolts.
Accessories included: (1) 9V battery.
Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
CMAF-3000
CMAF-3000-C*
07533
07608*
3000A Clamp-on Adapter
3000A Clamp-on Adapter
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Output
AC/DC Clamp-on Current Adapter
LISTED
Clamp Length
Measurement Category
•
•
•
•
•
300, 3000A
300A – 10mV output per 1 amp input
3000A – 1mV output per 1 amp input
24" (610 mm)
CAT III, 1000V
AC/DC current measuring accessory.
Measure up to 600 amps.
Perfect for any multimeter that reads AC and DC millivolts.
Accessories included: (1) 9V battery.
Lifetime Limited Warranty.
CAT. No.
UPC. No.
Description
CMA-60
07531
AC/DC Clamp-on Current Adapter
SPECIFICATIONS
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Amperage Measurement
Voltage Output
372
Clamp-on Current Adapter
LISTED
Jaw Opening
Measurement Category
•
•
•
•
0-600A
100 amp range – 10mV output per 1 amp input
600 amp range – 1mV output per 1 amp input
1.38" (35 mm)
CAT III, 300V; CAT II, 600V
AC current measuring accessory.
Measures up to 400A AC.
Perfect for any multimeter that reads AC millivolts.
Lifetime Limited Warranty.
CAT. No.
UPC. No.
Description
CMA-40
07530
Clamp-on Current Adapter
SPECIFICATIONS
Multimeter Hanging Strap
Amperage Measurement
Voltage Output
Jaw Opening
Measurement Category
0.1-400A
1mV per 1 amp input
1.18" (30 mm)
CAT III, 300V; CAT II, 600V
• Hanging accessory fits many digital multimeters
• Strong magnet for use on steel panels
• Nylon strap loops around pipes
• Includes magnet, strap, and mounting tab
CAT. No.
UPC No.
Description
DMHS-1
35774
Multimeter Hanging Strap
www.greenlee.com
CLAMP-ON METERS
Clamp-on Meter Comparison Guide
FEATURE
CMGRT-100 CMP-200
CMI-200
CMI-100
True RMS
•
•
•
DCA (A max)
2000
2500
1000
CM-1550
CM-1500
•
1000
CM-1350
•
1000
0.1
0.1
0.1
0.1
0.1
1.5
1.5
2.0
1.2
1.2
30
2000
2100
1000
1000
1000
1000
Maximum resolution (A)
1mA
0.1
0.1
0.1
0.1
0.1
0.1
0.1
Best accuracy (%)
2.5
1.5
1.5
2.0
1.9
1.9
1.9
1.9
600
600
600
1000
1000
1000
1000
DCV (V max)
1000
Maximum resolution (V)
0.1
0.1mV
0.1mV
0.1
0.1
0.1
0.1
Best accuracy (%)
1.5
1.5
0.75
0.7
0.7
0.7
0.7
ACV (V max)
600
600
600
750
750
750
750
Maximum resolution (V)
0.1
0.1mV
0.1mV
0.1
0.1
0.1
0.1
Best accuracy (%)
1.5
1.5
1.2
1.0
1.0
1.0
1.0
40M
40M
400
400
400
400
Resistance (Ω)
1200
Maximum resolution (Ω)
0.01
0.1
0.1
0.1
0.1
0.1
0.1
Best accuracy (%)
1.5
1.5
1.0
1.0
1.0
1.0
1.0
•
•
•
•
Continuity and beeper
•
•
Diode test
•
•
Testing & Measurement
Maximum resolution (A)
Best accuracy (%)
ACA (A max)
CM-1300
Capacitance
Frequency
Frequency response (Hz)
47-800
•
•
•
•
•
•
•
40-400
40-1k
40-450
50-500
50-500
50-500
50-500
Temperature (T1)
2.17"
(55 mm)
2.17"
(55 mm)
1.81"
(46 mm)
2.0"
(51 mm)
2.0"
(51 mm)
1.85"
(47 mm)
1.85"
(47 mm)
Display type
Digital
Dual Digital
Digital
Digital
Digital
Digital
Digital
Digital
2
2
2
2.5
2.5
2.5
2.5
4000
4000
4000
4000
4000
4000
4000
Analog bar graph
40
segments
40
segments
42
segments
Analog update X/sec
20
20
13
Display update X/sec
Count
3000
42
42
segments segments
13
13
42
segments
13
Zoom analog bar graph
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Auto power off
•
•
•
•
•
•
•
Peak hold
Data hold
•
•
•
•
•
•
•
•
•
•
•
•
Min, max
•
•
•
•
•
•
•
Data logging
Apparent Power (kVA)
1200
Measurement Category
III, 150V III, 600V
III, 600V
III, 600V
UL
IV, 600V
III, 1000V
IV, 600V
III, 1000V
IV, 600V
III, 1000V
IV, 600V
III, 1000V
•
•
•
•
•
•
•
•
cUL or CSA
•
•
•
•
•
•
•
CE
•
•
•
•
•
•
•
= new product
•
= Replacement Part
= Accessory
373
INTERNATIONAL
•
1200
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Power factor
True power (kW)
CANADA
•
Autoranging
Tel: 800.435.0786
Fax: 800.524.2853
Low battery indicator
USA
1.25"
(32 mm)
Tel: 800.435.0786
Fax: 800.451.2632
Jaw opening
MADE FOR THE TRADE!™
Clamp-on Meter Comparison Guide
FEATURE
True RMS
Testing & Measurement
DCA (A max)
CM-950 CM-900
•
600
CM-850
CM-800
CM-600
•
CMT-90
CMT-80
CM-450
•
CM-410
CM-330
•
600
Maximum resolution (A)
0.1
0.1
Best accuracy (%)
1.2
1.2
ACA (A max)
600
600
600
600
600
600
400 600
400
400
Maximum resolution (A)
0.1
0.1
0.1
0.1
0.1
0.1
0.1 0.01
0.1
0.01
2.0
Best accuracy (%)
1.9
1.9
1.9
1.9
1.9
1.9
1.8 1.5
1.9
DCV (V max)
600
600
600
600
600
1000
600 600
600
Maximum resolution (V)
0.1
0.1
0.1
0.1
1
0.1
0.1 0.1mV
0.1
Best accuracy (%)
0.7
0.7
0.7
0.7
0.8
1.0
1.0 0.3
1.0
600
ACV (V max)
600
600
600
600
600
1000
600 600
Maximum resolution (V)
0.1
0.1
0.1
0.1
1
0.1
0.1 1mV
0.1
Best accuracy (%)
1.0
1.0
1.0
1.0
1.2
1.5
1.5 1.5
1.5
Resistance (Ω)
400
400
400
400
2000
2000
2000 40M
20M
Maximum resolution (Ω)
0.1
0.1
0.1
0.1
1
0.1
1 0.1
0.1
Best accuracy (%)
1.0
1.0
1.0
1.0
1.5
2.0
2.0 0.6
0.7
•
•
•
•
•
•
Continuity and beeper
•
•
Diode test
•
•
Capacitance
Frequency
Frequency response (Hz)
•
•
•
50-500
50-500
50-400
•
50-400
40-500
50-500
•
50-60 50-60
50-500
50-60
Temperature (T1)
Jaw opening
Display type
Display update X/sec
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Count
374
Analog bar graph
Analog update X/sec
1.38"
1.38"
(35 mm) (35 mm)
Digital
Digital
1.34"
(34 mm)
1.34"
(34 mm)
1.38"
(35 mm)
1.34"
(34 mm)
1.06" 1.02"
(27 mm) (26 mm)
1.06"
(27 mm)
1.18"
(30 mm)
Digital
Digital
Digital
Digital
Digital Digital
Digital
Digital
2.5
2.5
2.5
2.5
4000
4000
4000
4000
42
42
42
segments segments segments
13
13
13
4
2000
10,000
1 to 4
3
6000 4000
1.5
25
2000
2000
42
segments
13
Zoom analog bar graph
Low battery indicator
•
•
•
•
•
•
•
•
• •
Autoranging
•
•
•
•
•
•
Auto power off
•
•
•
•
•
•
•
• •
•
•
•
Peak hold
•
•
•
•
Data hold
•
•
•
•
Min, max
•
•
•
•
•
•
•
max only
Data logging
Power factor
True power (kW)
Apparent Power (kVA)
Measurement Category
III, 600V III, 600V
III, 600V
III, 600V
III, 600V
IV, 600V
III, 600V III, 600V
III, 1000V
III, 600V
III, 600V
UL
•
•
•
•
•
•
•
•
• •
cUL or CSA
•
•
•
•
•
•
•
•
• •
CE
•
•
•
•
•
•
•
•
• •
www.greenlee.com
Ground Resistance Tester
• Reads ground resistance down to 0.10Ω.
• Fully autoranging with data hold to capture readings.
• Convenient alarm and 99-point memory functions.
• Measures up to 30A RMS ground or leakage current.
• Measures currents down to 1mA.
• Accessories included: (1) 9V battery, molded carrying case, test resistance loop.
• Lifetime Limited Warranty.
LISTED
UPC No.
Description
CMGRT-100
CMGRT-100-C*
07653
07730*
Ground Resistance Tester
Ground Resistance Tester
* Includes Certificate of Calibration
SPECIFICATIONS
Ground Resistance Measurement
Ground/Leakage Current Measurement
Display
Jaw Opening
Measurement Category
0.10 to 1200Ω
299mA; 2.999A, 29.99A
3-3/4-digit LCD, 2999-count
1.25" (32 mm)
CAT III, 150V
Testing & Measurement
CAT. No.
2000A Power Clamp
LISTED
CMP-200
CMP-200-C*
TSG-3
TC-55
07568
07635*
12034
07747
2000A Power Clamp
2000A Power Clamp
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
= Replacement Part
= Accessory
375
INTERNATIONAL
= new product
99.99, 999.9, 1200kW
99.99, 999.9, 1200kVAR
499.9, 2000A
499.9, 600V
10Hz-1000Hz
2.17" (55 mm)
CAT III, 600V
Tel: +1.815.397.7070
Fax: +1.815.397.9247
True Power
Reactive Power
Amperage Measurement
Voltage Measurement
Frequency
Jaw Opening
Measurement Category
CANADA
Description
USA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
CAT. No.
Tel: 800.435.0786
Fax: 800.451.2632
• True RMS for accurate measurement when harmonics are present.
• Extra high capacity 2000A measurement.
• Measures True Power, Apparent Power, Reactive Power, Power Factor,
voltage, current and frequency.
• Calculates total power and power factor on 3-phase, 3-wire, and 3-phase,
4-wire, and 1-phase, 3-wire circuits using stored measurement.
• Stores up to 4 sets of measurements for calculation on multi-phase
and multi-wire circuits.
• Large, easy-to-read, dual 4-digit, 4000-count LCD display for high
resolution.
• Instantly recall the calculated Power Factor.
• Accessories included: (1) 9V battery, test leads, carrying case.
• Lifetime Limited Warranty.
MADE FOR THE TRADE!™
2500A Industrial Clamp Meter
Testing & Measurement
LISTED
• True RMS for accurate measurement when harmonics are present.
• High capacity 2500A DC, 2100A AC amperage measurement.
• 600V AC/DC voltage, frequency, and resistance measurements for
maximum versatility.
• Peak hold, min-max, relative offset and analog bar graph to help monitor
power changes.
• Produces 1mV per amp output to allow use as a remote transducer, linked
to a multimeter or oscilloscope.
• Auto power off for longer battery life.
• Accessories included: (1) 9V battery, test leads, carrying case.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
CMI-200
CMI-200-C*
TSG-3
TC-55
07567
07634*
12034
07747
2500A Industrial Clamp Meter
2500A Industrial Clamp Meter
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Display
Frequency
Resistance
Jaw Opening
Voltage Output
Measurement Category
AC – 400.0, 2100A; DC – 400.0, 2500A
AC – 4.000, 40.00, 400.0, 600V
DC – 400.0mV; 4.000, 40.00, 400.0, 600V
3-3/4-digit, 4000-count (9999 for frequency)
99.99, 999.9Hz; 9.999, 99.99, 999.9kHz
400.0Ω; 4.000, 40.00, 400.0kΩ; 4.000, 40.00MΩ
2.17" (55 mm)
1mV output per 1 amp input
CAT III, 600V
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Industrial Clamp Meter
376
LISTED
• High capacity 1000A AC/DC amperage measurement.
• 600V AC/DC voltage, frequency, and resistance measurements
for maximum versatility.
• Continuity and diode tests with audible and visual indicators.
• Accessories included: (1) 9V battery, test leads, carrying case.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
CMI-100
CMI-100-C*
TSG-3
TC-50
07564
07631*
12034
07746
Industrial Clamp Meter
Industrial Clamp Meter
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Display
Frequency
Resistance
Jaw Opening
Measurement Category
400.0, 1000A
AC - 4.000, 40.00, 400.0, 600V
DC - 400.0mV; 4.000, 40.00, 400.0, 600V
3-3/4-digit, 4000-count (9999 for frequency)
Voltage Mode - 99.99, 999.9Hz; 9.999, 99.99, 800.0kHz
Current Mode - 99.99, 999.9Hz
400.0Ω; 4.000, 40.00, 400.0kΩ; 4.000, 40.00MΩ
1.81" (46 mm)
CAT III, 600V
www.greenlee.com
1000A AC/DC True RMS Clamp Meter
LISTED
CAT. No.
UPC No.
Description
CM-1550
CM-1550-C*
TSG-3
TC-30
07799
10863*
12034
07536
True RMS Clamp Meter
True RMS Clamp Meter
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance
Frequency
Display
Jaw Opening
Measurement Category
400.0, 1000A
AC V: 400.0, 750V; DC V: 400.0, 1000V
400.0Ω
0.400kHz
4000-count LCD display
2.0" (51 mm)
CAT IV, 600V
CAT III, 750V AC/1000V DC
Testing & Measurement
• True RMS for the most accurate measurement when harmonics are present.
• AC/DC amperage, AC/DC voltage, frequency and resistance measuring capability.
• Dual Hall sensor for the most accurate measurements.
• Easy-to-read backlit display for use in low light conditions.
• Peak and data hold to capture measurement.
• MIN/MAX feature for added versatility.
• Analog bar graph to view quick changes.
• Audible continuity test.
• Selectable Auto Off for longer battery life.
• Accessories included: (1) 9V battery, test leads, carrying case.
• Lifetime Limited Warranty.
LISTED
07798
10862*
12034
07536
Clamp Meter
Clamp Meter
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance
Frequency
Display
Jaw Opening
Measurement Category
= new product
= Replacement Part
= Accessory
400.0, 1000A
AC V: 400.0, 750V; DC V: 400.0, 1000V
400.0Ω
0.400kHz
4000-count LCD display
2.0" (51 mm)
CAT IV, 600V per IEC 61010-1
CAT III, 750V AC/1000V DC
377
INTERNATIONAL
CM-1500
CM-1500-C*
TSG-3
TC-30
CANADA
Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
CAT. No.
Tel: 800.435.0786
Fax: 800.451.2632
• AC/DC amperage, AC/DC voltage, frequency and resistance
measuring capability.
• Dual Hall sensor for the most accurate measurements.
• Easy-to-read backlit display for use in low light conditions.
• Peak and data hold to capture measurement.
• MIN/MAX feature for added versatility.
• Analog bar graph to view quick changes.
• Audible continuity test.
• Selectable Auto Off for longer battery life.
• Accessories included: (1) 9V battery, test leads, carrying case.
• Lifetime Limited Warranty.
USA
1000A AC/DC Clamp Meter
MADE FOR THE TRADE!™
1000A AC True RMS Clamp Meter
Testing & Measurement
LISTED
• True RMS for the most accurate measurement when harmonics are present.
• AC amperage, AC/DC voltage, frequency and resistance measuring capability.
• Easy-to-read backlit display for use in low light conditions.
• Peak and data hold to capture measurement.
• MIN/MAX feature for added versatility.
• Analog bar graph to view quick changes.
• Audible continuity test.
• Selectable Auto Off for longer battery life.
• Accessories included: (1) 9V battery, test leads, carrying case.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
CM-1350
CM-1350-C*
TSG-3
TC-30
07733
10861*
12034
07536
True RMS Clamp Meter
True RMS Clamp Meter
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance
Frequency
Display
Jaw Opening
Measurement Category
0- 400.0, 1000A
AC V: 400.0, 750V
DC V: 400.0, 1000V
0-400.0Ω
0.400kHz
4000-count LCD display
1.85" (47 mm)
CAT IV, 600V
CAT III, 750V AC/1000V DC
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
1000A AC Clamp Meter
378
LISTED
• AC amperage, AC/DC voltage, frequency and resistance measuring capability.
• Easy-to-read backlit display for use in low light conditions.
• Peak and data hold to capture measurement.
• MIN/MAX feature for added versatility.
• Analog bar graph to view quick changes.
• Audible continuity test.
• Selectable Auto Off for longer battery life.
• Accessories included: (2) 1.5 V AA batteries, test leads, carrying case.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
CM-1300
CM-1300-C*
TSG-3
TC-30
07732
10860*
12034
07536
Clamp Meter
Clamp Meter
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance
Frequency
Display
Jaw Opening
Measurement Category
0- 400.0, 1000A
AC V: 400.0, 750 V
DC V: 400.0, 1000V
0-400.0Ω
0.400kHz
4000-count LCD display
1.85" (47 mm)
CAT IV, 600V
CAT III, 750V AC/1000V DC
www.greenlee.com
600A AC/DC True RMS Clamp Meter
LISTED
CAT. No.
UPC No.
Description
CM-950
CM-950-C*
TSG-3
TC-10
07700
10859*
12034
07534
AC/DC True RMS Clamp Meter
AC/DC True RMS Clamp Meter
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance
Frequency
Display
Jaw Opening
Measurement Category
400.0, 600A
400.0, 600V
400.0Ω
0.400kHz
4000-count LCD
1.38" (35 mm)
CAT III, 600V
Testing & Measurement
• True RMS for the most accurate measurement when harmonics are present
• AC/DC amperage, AC/DC voltage, frequency and resistance measuring capability.
• Dual Hall sensor for DC amperage accuracy.
• Easy-to-read backlit display for use in low light conditions.
• Peak and data hold to capture measurement.
• MIN/MAX feature for added versatility.
• Analog bar graph to view quick changes.
• Auto zero for DCA measurement.
• Selectable Auto Off for longer battery life.
• Accessories included: (1) 9V battery, test leads, carrying case.
• Lifetime Limited Warranty.
600A AC/DC Clamp Meter
CM-900
CM-900-C*
TSG-3
TC-10
07699
10858*
12034
07534
AC/DC Clamp Meter
AC/DC Clamp Meter
Sure-Grip Test Leads
Carrying Case
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance
Frequency
Display
Jaw Opening
Measurement Category
= new product
= Replacement Part
= Accessory
400.0, 600A
400.0, 600V
400.0Ω
0.400kHz
4000-count LCD display
1.38" (35 mm)
CAT III, 600V
Tel: +1.815.397.7070
Fax: +1.815.397.9247
* Includes Certificate of Calibration
379
INTERNATIONAL
Description
CANADA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
CAT. No.
USA
LISTED
Tel: 800.435.0786
Fax: 800.451.2632
• AC/DC amperage, AC/DC voltage, frequency and resistance measuring capability.
• Dual Hall sensor for DC amperage accuracy.
• Easy-to-read backlit display for use in low light conditions.
• Peak and data hold to capture measurement.
• MIN/MAX feature for added versatility.
• Analog bar graph to view quick changes.
• Auto zero for DCA measurement.
• Selectable Auto Off for longer battery life.
• Accessories included: (1) 9V battery, test leads, carrying case.
• Lifetime Limited Warranty.
MADE FOR THE TRADE!™
600A AC True RMS Clamp Meter
Testing & Measurement
LISTED
• True RMS for the most accurate measurement when harmonics are present.
• AC amperage, AC/DC voltage, frequency and resistance measuring capability.
• Easy-to-read backlit display for use in low light conditions.
• Peak and data hold to capture measurement.
• MIN/MAX feature for added versatility.
• Analog bar graph to view quick changes.
• Selectable Auto Off for longer battery life.
• Accessories included: (1) 9V battery, test leads, carrying case.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
CM-850
CM-850-C*
TSG-3
TC-10
07666
10857*
12034
07534
True RMS Clamp Meter
True RMS Clamp Meter
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance
Frequency
Display
Jaw Opening
Measurement Category
AC - 400.0, 600A
400.0, 600V
400.0Ω
0.400kHz
4000-count LCD
1.34" (34mm)
CAT III, 600V
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
600A AC Clamp Meter
380
LISTED
• AC amperage, AC/DC voltage, frequency and resistance measuring capability.
• Easy-to-read backlit display for use in low light conditions.
• Peak and data hold to capture measurement.
• MIN/MAX feature for added versatility.
• Analog bar graph to view quick changes.
• Selectable Auto Off for longer battery life.
• Accessories included: (2) 1.5 V AA batteries, test leads, carrying case.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
CM-800
CM-800-C*
TSG-3
TC-10
07664
10856*
12034
07534
Clamp Meter
Clamp Meter
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Resistance
Frequency
Display
Jaw Opening
Measurement Category
AC - 400.0, 600A
400.0, 600V
400.0Ω
0.400kHz
4000-count LCD display
1.34" (34mm)
CAT III, 600V
www.greenlee.com
AC Clamp-on Meter
CM-600 features:
• Both AC amperage and AC/DC voltage measurement.
• Resistance measurement up to 2000Ω.
• Auto power off for longer battery life.
• Accessories included: (1) 9V battery, test leads, carrying case.
• Lifetime Limited Warranty.
LISTED
UPC No.
Description
07593
07625*
12034
07534
AC Clamp-on Meter
AC Clamp-on Meter
Sure-Grip Test Leads
Carrying Case
* Includes Certificate of Calibration
SPECIFICATIONS
Amperage Measurement
Voltage Measurement
Display
Resistance
Jaw Opening
Measurement Category
600A AC
600V
3-1/2-digit LCD, 2000-count
2000Ω
1.38" (35 mm)
CAT III, 600V
Testing & Measurement
CAT. No.
CM-600
CM-600-C*
TSG-3
TC-10
True RMS Clamp Meter
Description
CM-450
TSG-3
TC-5
12726
12034
07588
AC Clamp-on Meter, True RMS
Sure-Grip Test Leads
Carrying Case
Resistance
Measurement Category
= new product
= Replacement Part
= Accessory
40.00, 400.0, 600 A AC
1.02" (26 mm)
LCD, 4000-count
4.000, 40.00, 400.0, 600 V AC
400.0 mV, 4.000, 40.00, 400.0, 600V DC
400.0Ω; 4.000, 40.00, 400.0kΩ; 4.000, 40.00MΩ
CAT III, 600V per UL 61010-1
381
INTERNATIONAL
Amperage Measurement
Jaw Opening
Display
Voltage
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
CANADA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
CAT. No.
USA
LISTED
Tel: 800.435.0786
Fax: 800.451.2632
• AC amperage, AC/DC voltage measurement.
• True RMS for the most accurate measurement where harmonics are present.
• Quick, easy operation.
• Auto power off for longer battery life.
• Resistance measurement.
• Audible continuity and diode tests.
• Frequency measurement.
• Data hold to capture measurement.
• 4000 count LCD.
• Accessories included: Test leads, 3V Standard button battery
(IEC-CR 2032; ANSI-NEDA 54004LC)
• Lifetime Limited Warranty.
MADE FOR THE TRADE!™
AC Clamp-on Meter
Testing & Measurement
LISTED
• Measures to 600 volts AC and DC, and 400 amps AC.
• Data hold to capture important readings.
• Audible continuity test.
• Auto power off for longer battery life.
• Accessories included: (2) 1.5V AAA batteries, test leads, carrying case.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
CM-410
TSG-3
TC-5
73420
12034
07588
AC Clamp-on Meter, 400A
Sure-Grip Test Leads
Carrying Case
SPECIFICATIONS
Amperage Measurement
Jaw Opening
Display
Voltage
Resistance
Measurement Category
200.0, 400A AC
1.06" (27 mm)
3-1/2-digit LCD, 2000-count
200.0, 600V
200.0Ω; 2.000, 20.00, 200.0kΩ; 2.000, 20.00MΩ
CAT III, 600V
Clamp-on Meter
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
LISTED
382
• AC current measuring capability up to 400 amps.
• Compact size, fits easily into tool pouch.
• Data hold and Max hold to capture important readings.
• 2000-Count LCD.
• Lifetime Limited Warranty.
• Accessories included: (1) 9V battery, carrying case.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
CM-330
TC-5
11865
07588
Clampmeter, 400A AC
Carrying Case
SPECIFICATIONS
Amperage Measurement
Display
Jaw Opening
Measurement Category
20.00, 200.0, 400 A AC
2000-count LCD
1.18" (30 mm)
CAT III, 600 V per UL 61010B-1
www.greenlee.com
CIRCUIT TRACING
Circuit Tracer Application Guide
finder
circuit
seeker
OPEN
Circuit
closed
CIRCUIT
breaker
FINDER
BREAKER
finder
2008
2007
CS-2072
CS-2072K
•
• 1
•
•
•
Locate and identify fuses
•
• 1
•
•
•
Locate and identify blown fuses
•
•
Trace concealed wiring in walls and floors
•
•
•
Locate junction box relays and transformers
•
•
•
Locate switch gear
•
•
•
Find shorts to ground
•
•
•
Trace wires in PVC (nonmetallic conduit)
•
•
•
Find opens in a circuit
•
•
Localize power and lighting panels
•
•
Operate on energized circuits
Operate on low voltage circuits
•
•
1
•
•
•
•
•
•
Operate on high voltage circuits (600VAC)
•
Operate on unenergized circuits
•
•
•
• 3
Trace shielded cable
•
Trace metal conduit
•
Sort wires and trace coax cable
•
Auto gain circuitry for improved accuracy
•
2
•
•
0-480V
9-300V
0-750V
0-480V
9-300V
300 ft.-4 mi.5
(915 m-6.5 km)
3000-4000 ft.
(915 m-1220 m)
(2) AA
(2) AA
110-120V
80-277V
3-4 miles
(4.9 km-6.5 km)
300 ft.
(91.4 m)
300 ft.
(91.4 m)
9V
—
—
—
9V
9V
9V
9V
Transmitter battery
Receiver battery
1. Will operate on energized circuits in limited applications. Will not locate and identify a particular breaker or fuse, but will identify breakers or fuses that share a common bus.
2. Good earth ground required. Attach one prong of transmitter to shield of the cable and the other prong to a good earth ground (such as water pipe, metal building frame, etc.).
3. For circuits without power, hook-up a 9V battery in series with the circuit and transmitter to power the line.
4. Closed circuit applications only.
5. Depends on application – shorter distances for open circuit tracing, longer distances for closed circuit tracing applications.
= Accessory
383
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Replacement Part
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
= new product
USA
0-750V
DC voltage range
Tel: 800.435.0786
Fax: 800.451.2632
AC voltage range
Distance – receiver from transmitter
•
Testing & Measurement
CS-8000
Locate and identify breakers
MADE FOR THE TRADE!™
CS-8000 Circuit Seeker™ Circuit Tracer
Testing & Measurement
LISTED
Features:
• Advanced patented non-directional sensing technology.
• Superior sensitivity and functionality providing for accurate tracing & locating.
• Ergonomic receiver with information-rich full-color graphical LCD.
• Graphics and audible signal provide quick and easy to understand
tracing feedback.
• Traces concealed wiring, locates junction boxes, and finds breakers for live
or open circuits.
• Locates and identifies blown fuses.
• Finds shorts and breaks in conductors.
• Low pitch, high volume audible indicator.
• User-selectable automatic or manual gain capability for fast, convenient use.
• Can be used on GFCI protected circuits.
• Automatic backlight on receiver maximizes battery life.
• Supports transmitter-to-receiver distances up to 4 miles for closed circuit tracing.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
CS-8000
12849
12850
10057
10054
12852
12853
12851
12126
12849
12850
10057
10054
12852
12853
12851
Circuit Seeker
Transmitter
Receiver
Alligator Clips (2)
AC Blade
AC Plug Adapter
Extension Leads (2)
Carrying Case
SPECIFICATIONS
Capacity
Frequency
Receiver Range
0 to 750V AC/DC
15.15 kHz
up to 20' (6 m) Live Line Mode; up to 10' (3 m) Open Line with
metallic connection to ground; 1-3' (.3-.9 m) with capacitive
ground reference
4.3 lbs. (1950 g)
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Weight
384
Power Finder® Open Circuit Tracer
Features:
• Fast, simple, unenergized circuit tracing.
• Traces concealed wiring.
• Supports transmitter-to-receiver distances up to 4000 feet (1220 m).
• Accessories included: transmitter plug, (2) receptacle blades, extension
leads, (2) 9V batteries, carrying case.
• Lifetime Limited Warranty.
CAT. No.
UPC No.
Description
2008
38787
38788
36928
36929
38789
36930
38786
38787
38788
36928
36929
38789
36930
Power Finder Open Circuit Tracer
Receiver
Transmitter
Transmitter Plug
Receptacle Blades (2), AC
Plastic Case
Test Lead
SPECIFICATIONS
Capacity
Case Size
Weight
Distance
0 to 480V AC/DC
12" x 8-3/4" x 2" (305 mm x 222 mm x 51 mm)
2.4 lbs. (1089 g)
3000 ft. - 4000 ft. (915 m-1220 m)
www.greenlee.com
Power Finder® Closed Circuit Tracer
CAT. No.
UPC No.
Description
2007
38583
36925
36926
36928
36929
36930
36927
36924
38583
36925
36926
36928
36929
36930
36927
Power Finder Closed Circuit Tracer
High Voltage Adapter
Receiver*
Transmitter*
Transmitter Plug*
Receptacle Blades (2), AC*
Test Lead*
Plastic Case*
* 2007/36924 includes these items
SPECIFICATIONS
Capacity
2007 - 9 to 300V AC/DC
38583 - 9 to 680 VAC, 9 to 1000 VDC
12" x 8-3/4" x 2" (305 mm x 222 mm x 51 mm)
2.4 lbs. (1089 g)
3000 ft. - 4000 ft. (915m - 1220m)
Case Size
Weight
Distance
Testing & Measurement
• Fast, simple energized circuit tracing.
• Traces circuits in nonmetallic conduit.
• Finds shorts to ground.
• Supports transmitter-to-receiver distances up to 4 miles (6.5 km).
• Accessories included: transmitter plug, (2) receptacle blades, test leads, (1)
9V battery, carrying case.
• Lifetime Limited Warranty.
Breaker Finder
UPC No.
Description
CS-2072
CS-2072K
12135
12136
Breaker Finder
Kit, Breaker Finder
Transmitter
Voltage Range (CS-2072)
Voltage Range (CS-2072K)
Measurement Category:
Receiver
Audible/Visual circuit indicator
Power indicating LED
On/Off switch
Belt clip
CS-2072K
= new product
= Replacement Part
= Accessory
110-120V AC, 60 Hz
80-277V AC, 50-60 Hz
CAT II (transmitter only)
✓
✓
✓
✓
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SPECIFICATIONS
385
INTERNATIONAL
CAT. No.
CANADA
CS-2072
Tel: 800.435.0786
Fax: 800.524.2853
CS-2072 features:
• Transmitter and receiver snap together for convenient storage.
• Compact receiver accurately locates AC breakers.
• Receiver belt clip for easy transport.
• Accessories included: (1) 9V battery.
• Lifetime Limited Warranty.
USA
LISTED
Tel: 800.435.0786
Fax: 800.451.2632
CS-2072K features:
• Convenient kit for residential circuit finding applications.
• Use with 50-60 Hz service from 80-277 Volts.
• Accessories for connecting transmitter to different outlet types.
• Compact receiver accurately locates AC breakers.
• Receiver belt clip for easy transport.
• Accessories included: (1) 120 VAC adapter plug, (1) light socket
adapter, (2) blades, (2) clips, (1) 9V battery, (1) carrying case.
• Lifetime Limited Warranty.
MADE FOR THE TRADE!™
SENSORS & SCANNERS
SF-420AC Stud Sensor with AC Detection
Testing & Measurement
• Reliable way to detect the presence of AC voltage and to find wood
or metal studs.
• Finds the edges of wood or metal studs up to 3/4" (19 mm) deep,
through typical drywall construction.
• DeepScan® mode finds the edges of wood or metal studs up to 1-1/2" (38 mm)
deep for thick construction such as plywood, paneling, or tile over drywall.
• Non-contact detection of AC voltage.
• Senses the changes in subsurface densities to pinpoint studs and joists,
while detecting unshielded AC voltage.
• Dual scanning for more flexibility.
• Accessories included: (1) 9V battery.
• 1 Year Limited Warranty
CAT. No.
UPC No.
Description
SF-420AC
12137
Stud Finder
SPECIFICATIONS
Battery Type
Position Accuracy
Detection Depth
AC Position Accuracy
AC Sensing Depth
9 V alkaline (included)
Stud Scan Mode: Typically within 1/8" (3 mm) using the dual
scan and mark procedure.
DeepScan Mode: Typically within 3/16" (5 mm) using the dual
scan and mark procedure.
Stud Scan Mode: Typically up to 3/4" (19 mm)
DeepScan Mode: Up to 1-1/2" (38 mm)
Typically 90 V to 250 V at 50 Hz to 60 Hz within 6" (150 mm) of
a hot unshielded wire
In typical drywall with Romex® wiring, wires can be detected up
to 3" (76 mm) deep.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SF-530 Multiscanner
• Reliable way to detect the presence of AC voltage, find wood or metal studs,
metal pipes and rebar.
• Finds both wood and metal studs.
• AC scanning to trace hot wires.
• Metal scanning for finding pipes.
• Backlit display for easy viewing.
• Accessories included: (1) 9V battery.
• 1 Year Limited Warranty
CAT. No.
UPC No.
Description
SF-530
12138
Multiscanner
SPECIFICATIONS
Battery Type
Position Accuracy
Detection Depth
AC Position Accuracy
AC Sensing Depth
386
9 V alkaline (included)
Stud Scan Mode: Typically within 1/8" (3 mm) using the dual
scan and mark procedure.
DeepScan Mode: Typically within 3/16" (5 mm) using the dual
scan and mark procedure.
Metal Scan Mode: Typically within 1/2" (13 mm)
Stud Scan Mode: Typically up to 3/4" (19 mm)
DeepScan Mode: Up to 1-1/2" (38 mm)
Metal Scan Mode: Up to 1-1/2" (38 mm) for copper; up to 3" (76 mm)
for rebar.
Typically 90 V to 250 V at 50 Hz to 60 Hz within 6" (150 mm) of
a hot unshielded wire
Typically 2" (50 mm)
www.greenlee.com
SF-780 Metal Locator
CAT. No.
UPC No.
Description
SF-780
12139
Locator, Metal
SPECIFICATIONS
Battery Type
Position Accuracy
Detection Depth
9 V alkaline (included)
Center of 1/2" (#4) rebar or 1/2" (13 mm) copper pipe
at a minimum grid spacing of 6" (152 mm), typically within
1/2" (13 mm).
Up to 6" ± 1" (152 mm ± 25 mm)
Testing & Measurement
• Save time by eliminating rework, needless holes and broken bits
and sawblades.
• Finds both ferrous and non-ferrous metal and indicates depth up
to 6" (152 mm) deep.
• Easy to read LCD identifies target location and depth.
• Scans through concrete and most metallic materials.
• Indicates depth to nearest 1/2" (13 mm).
• Automatically indicates whether target is steel rebar or copper pipe
(or any magnetic vs. non-magnetic material).
• Easy to use - simple two button operation.
• Accessories included: (1) 9V battery, carrying case.
• 1 Year Limited Warranty
387
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Accessory
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
= Replacement Part
USA
Tel: 800.435.0786
Fax: 800.451.2632
= new product
MADE FOR THE TRADE!™
LOCATORS
Locators Application Guide
BLL-200
Testing & Measurement
Trace concealed wiring in walls and floors
501
•
•
Find shorts to ground
Trace wires in PVC (nonmetallic conduit)
•
Find opens in a circuit
Tel: +1.815.397.7070
Fax: +1.815.397.9247
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
•2
•
•1
•
•2
•
Localize power and lighting panels
•
•
•
Operate on energized circuits
•
•
•
Operate on low voltage circuits
•
•
•
•
Operate on high voltage circuits (600VAC)
•
Operate on unenergized circuits
•
•
•
•
•
Trace shielded cable
•
•3
•3
•3
Trace buried metal conduit
Trace coax cable
Auto gain circuitry for improved accuracy
•
•5
•5
•4
•
AC voltage range
0-600V
0-240V
0-240V
0-240V
0-120V
DC voltage range
0-300V
0-500V
0-400V
0-500V
0-250V
5,000 ft.
•7
5000 ft.
1000 ft.
•6
Receiver battery
USA
521A
•
Locate switch gear
Transmitter battery
(4) AA
(8) AA
Tel: 800.435.0786
Fax: 800.451.2632
508S
Locate junction box relays and transformers
Distance–receiver from transmitter
388
PE2003
•
(4) AA
(1) 9V
12V
(1) 9V
(8) D
rechargeable
(1) 9V
(1) 9V
(1) 9V
1. 10,000 ohms and less–both ends isolated from grounds.
4. Will trace coax providing the bOnd is in place at the remote end–will disrupt service.
2. Does not locate the path–has to be predetermined and only in direct burial applications. 5,000,000 and less.
5. No sorting (high RF bleeds) can trace coax if transmitter connected to braid.
3. Transmitter connected to metallic shield.
6. Low frequency locators need a “path to earth” (dirt), 5000 ft. on an open conductor and 2500 ft. on a metallic pipe at 3
ft. deep.
7. Direct Connection 4,000 ft at 7 ft deep
Inductive Coupler 1,000 ft at 3 ft deep
Inductive Antenna 700 ft at 3 ft deep
www.greenlee.com
Buried Line Locator
•
•
•
•
•
•
•
•
•
•
Specifications
Transmitter
CAT. No.
UPC No.
Description
BLL-200
07796
Buried Line Locator
Operating Voltage
Current
Receiver
0-600VAC,
0-300 VDC
13mA (open line)
150mA (live or shorted line)
Frequency
33.3kHz
Depth Range Measures:
0-15 ft.
Traces:
0-20 ft.
±(10% reading + 0.2 ft.)
Depth Resolution
0.1 ft. increments
Passive Trace Frequency 12Hz-24kHz
Operating Temperature 0°F to 120°F
(-17°C to 50°C)
Size
7.5" x 4" x 2.1"
(190.5 mm x 101.6 mm x 53 mm)
Operating Temperature
Power
Power
6 VDC (4 AA batteries)
Weight
1 lb. 12 oz. (794 g)
Weight
6 VDC (4 AA batteries)
15 oz. (425 g)
(with batteries and clamp)
0°F to 120°F
Testing & Measurement
•
LED and LCD signal strength indicators make it quick and easy to find exact line location.
Lightweight and ergonomically balanced.
Automatic signal boost makes it easy to trace lines, even those with very weak signals.
Receiver may be used in active or passive mode.
Receiver locates multiple passive frequencies with a single setting.
Receiver automatically locks out passive range when it detects a transmitter signal,
reducing the chance of tracing other lines carrying weaker signals.
Microprocessor-based circuitry delivers increased accuracy and features auto-gain
control in all environments.
Traces 20' (6 m) underground and provides depth readings up to 15' (4.57 m).
Transmitter can be connected to live lines up to 600V.
Lifetime limited warranty.
Molded carrying case included.
(-17°C to 50°C)
Size 4.1" x 8.5" x 38" (104.1 mm x
215.9 mm x 965.2 mm)
Tracker II
08662
60353
60352
60354
60355
60351
Tracker II
Transmitter
Receiver
Inductive Clamp
Transmitter Cord Set
Case with Antenna
= new product
= Replacement Part
= Accessory
Dimensions
Weight
Transmitter – (8) AA batteries; Receiver – (1) 9V battery
Transmitter – 30 hours nominal; Receiver – 10 hours nominal
447.5kHz
40Vp-p (140mW) maximum
240VAC/500VDC
90 Min. Transmitter and Receiver
Transmitter/Receiver – powder-coated aluminum
Case – vacuum formed polyethylene
Transmitter – 4.25" x 3" x 3.25"; Receiver – 32" x 2.75" x 4"
Case – 33.5" x 8.25" x 3.75"
6.7 lbs. (complete kit)
389
INTERNATIONAL
501
501T
501R
IC1
CS16
500CA
Power Requirements
Battery Life
Transmitter Frequency
Transmitter Power
Voltage Protection
Automatic Shut Off
Construction
CANADA
Description
USA
UPC No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
CAT. No.
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.524.2853
Headset (accessory)
CAT. No. HS-1
UPC No. 08695
Tel: 800.435.0786
Fax: 800.451.2632
• Traces the path and determines the depth of wires and metallic pipes on active
or dead systems without having to deactivate the system.
• Lightweight receiver provides audible and visual indications of signal strength.
• Transmitter output and receiver sensitivity are fully adjustable for maximum
accuracy.
• Transmitter offers three methods of connection: direct, inductive coupler and
inductive antenna.
• Includes transmitter assembly, receiver assembly, inductive coupler (clamp),
built-in inductive antenna, two 8' (2.4 m) test leads with heavy-duty alligator clips
and durable polyethylene case.
• High frequency transmitter provides range up to 4,000' (1,219 m) and depths
up to 7' (2 m).
• Receiver is 32" long (813 mm).
• Battery operated (eight AA and one 9V battery is included).
• Molded carrying case included.
• 1-year limited warranty.
MADE FOR THE TRADE!™
Testing & Measurement
Pulser Fault Locator
• Identifies the exact location of even the smallest breaks in insulation by
“pulsing” a high-voltage signal that radiates into the earth at the location
of the faults. With the A-frame mounted receiver, a visual analog meter
points the way to the source of the voltage.
• Multiple faults on a single wire can be identified, indicating the need
to replace instead of repair.
• Extra-long test leads feature heavy-duty alligator clips for use on multiple
cable types.
• Includes a rechargeable transmitter, receiver, A-frame, ground stake,
120V charger and a 12V DC (cigarette lighter) adapter.
• Battery-operated: (1) 12V and (1) 9V battery included.
• Molded carrying case included.
• 1-year limited warranty.
SPECIFICATIONS
Power Requirements
Battery Life
Transmitter Power
Voltage Protection
Construction
CAT. No.
UPC No.
Description
PE2003
2000H
2000R
AF2
CH1
CH2
08666
60357
60358
60482
60360
60361
Pulser
Transmitter
Receiver
A-Frame
AC Charger
DC Charger
Dimensions
Weight
Transmitter: (1) 12V rechargeable battery;
Receiver: (1) 9V battery
Transmitter: 23 hours per charge; Receiver: 200 hours
2400VDC peak
240VAC/400VDC
Transmitter – aluminum housing in polyethylene case;
Receiver – powder-coated aluminum
Transmitter – 17" x 8.5" x 6.5"
(421 mm x 215 mm x 160 mm)
in case Receiver – 33.5 x 21.75" x 3.25"
(840 mm x 550 x 8 mm) on A-Frame
12.5 lbs. complete
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Traces energized or de-energized wires in walls and drop ceilings.
• Provides reliable results on buried cables to depths of 3' (1 m)
and lengths up to 1000' (308 m).
• Determines the approximate depth of the wire before digging.
• Compact design.
• Easy-to-understand operations.
• Fully adjustable transmitter and receiver for accurate locating.
• Quick change test leads for use in any industry, even international
power outlets.
• Voltage protection to allow use on live AC circuits.
• Automatic shut-off to prevent accidental battery discharge.
• Housed in a durable, molded carrying case with a quick reference
operation guide on the inside of the lid.
• Battery-operated: (2) 9V batteries included.
• 1-year limited warranty.
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Wire Finder/Mini Locator
390
SPECIFICATIONS
CAT. No.
UPC. No
Description
508S
508ST
508SR
CS14
CS15
08678
60363
60364
60366
60367
Wire Finder/Mini Locator
Transmitter
Receiver
Alligator Clip Cord set
AC Outlet Cord set
Power Requirements
Battery Life
Transmitter Frequency
Transmitter Power
Voltage Protection
Construction
Dimensions
Weight
(1) 9V each (transmitter and receiver, included)
Transmitter 35 hours nominal; Receiver 20
hours nominal
447.5kHz
9Vp-p (11mW)
240VAC/500VDC
Transmitter/Receiver – high-impact ABS plastic,
Case – vacuum-formed polyethylene
Transmitter – 4" x 2.3" x 1"
Receiver – 6" x 2.35" x 1"
Case – 9.5" x 8" x 3"
2.6 lbs.
www.greenlee.com
Wire and Valve Locator
SPECIFICATIONS
Power Requirements
CAT. No.
UPC No.
Description
521A
521T
521R
HS1
GS1
86788
60368
60352
08695
60362
Wire and Valve Locator
Transmitter
Receiver
Headset
Ground Stake
Transmitter: (8) “D” Cell;
Receiver: (1) 9V battery
Transmitter: 50 hours nominal
Receiver: 100 hours nominal
1748Hz
750Vp-p 285Vrms
120VAC/250VDC
Powder-coated aluminum housing in polyethylene case
33.5" x 8.25" x 3.75"
12 lbs. complete
Battery Life
Transmitter Frequency
Transmitter Power
Voltage Protection
Construction
Case Dimensions
Weight
Testing & Measurement
• Adjustable transmit power allows you to select the best signal for maximum
performance.
• Transmitter’s high power output offers extended range and use on higher
resistance wire paths that other locators can’t touch.
• Receiver provides both audible and visual indications of signal strength.
• Lightweight receiver wand makes it easy for you to move along quickly
to locate even the longest wire path.
• Rugged headphones block ambient noise and improve “feel” for the signal.
• Includes transmitter, receiver, headset, ground stake, and complete instructions.
• Battery-operated: (8) “D” Cells and (1) 9V.
• 1-year limited warranty.
Station Master™ Pro
24B
24BK
700C
86786
86787
08683
Station Master Pro
Station Master Pro Kit
Carrying Case
SPECIFICATIONS
Power Source
Battery Life
Operating/Storage Temp.
= new product
= Replacement Part
= Accessory
10.5 VDC
28 VAC
2.5 seconds
12 AWG Loop 3000-13000 feet
14 AWG Loop 2000-8500 feet
18 AWG Loop 500-3000 feet
9V alkaline batteries
3 hours continuous
32°F - 122°F (0° - 50°C)
391
INTERNATIONAL
24BK
15 VAC (LED intensity increases as voltage increases)
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Minimum Voltage for Clock
LED
Minimum Battery while
Testing
Maximum Input Voltage
between Test Leads
Solenoid Circuit Recharge
Time
Maximum Distance Range to
Activate one Solenoid
CANADA
Description
USA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
24B
CAT. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Troubleshoot irrigation systems.
• Activate and cycle solenoids.
• Test solenoids for continuity.
• Send tone to identify wires.
• Measure clock voltage.
• Low battery indication.
• Easy-to-understand LEDs.
• Test leads with “Bed-of-Nails” and piercing Pin Clips.
• 1-year limited warranty.
MADE FOR THE TRADE!™
BASIC ELECTRICAL KITS
Basic Electrical Kit
Testing & Measurement
TK-30GFI
DM-20
GT-10GFI
GT-11
TK-30
DM-20
GT-11
GT-10
DM-20
• Use to measure voltage and check 1.5 V and 9 V batteries.
• AC/DC voltage, DC amperage measurement.
• Built-in test leads, no loose parts to lose.
• Resistance measurement.
• Audible continuity and diode tests.
• Lifetime Limited Warranty.
GT-11
• Use to detect voltage in outlets, lighting fixtures, circuit breakers, wires and cables
or to find a break in a wire.
• Measurement catagory IV. Application range 50-1000 volts AC.
GT-15
• Use to detect voltage in low voltage applications ranging from 12-90 volts AC.
GT-11 AND GT-15
• Safe, non-contact voltage detection.
• Bright LED and audible alarm sound if voltage is present.
• On/Off switch for longer battery life.
• Convenient pen-size device easily fits into pockets or tool pouches.
• Lifetime Limited Warranty
GT-10 AND GT-10GFI
• Use to troubleshoot 120V AC grounded outlets.
• Light sequence indicates correct / incorrect wiring.
• GT-10GFI also tests GFCI receptacles.
• Lifetime Limited Warranty.
Cat. No.
UPC No.
Description
TK-30
TK-30IR
TK-30GFI
12127
89799
10268
Electrical Kit, Basic
Electrical Kit, Low Voltage
Electrical Kit, GFCI
SPECIFICATIONS
TK-30IR
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
See Page 370
See Below
See Below
See Page 362
GT-15
CIRCUIT VERIFYING
Polarity Cubes
GT-10GFI
LISTED
GT-10
• Use to troubleshoot 120 V AC grounded outlets.
• Light sequence indicates correct/incorrect wiring.
• Lifetime Limited Warranty
GT-10GFI
• Use to troubleshoot 120 V AC grounded outlets and test GFCI receptacles.
• Light sequence indicates correct/incorrect wiring.
• Lifetime Limited Warranty
GT-10
392
DM-20
GT-10
GT-10GFI
GT-15
GT-10GFI
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
DM-20
CAT. No.
UPC No.
Description
GT-10
GT-10GFI
12124
12125
Cube, Polarity
Tester, Circuit Gfi
www.greenlee.com
Inspector GFCI and Circuit Tester
• Allows instant testing of GFCI receptacles or GFCI circuit breaker protected circuits.
• Indicates whether a GFCI will trip at 3, 5, 7 or 10mA.
• Checks 120VAC grounded outlets for correct/incorrect wiring.
• LED indicators signal correct wiring, open ground, open neutral, open hot,
hot/ground reversed and hot/neutral reversed.
• Lifetime Limited Warranty
UPC No.
Description
5708i
5708i-C*
34524
07641*
Inspector GFCI and Ciruit Tester
Inspector GFCI and Circuit Tester
* Includes Certificate of Calibration
Specifications
Capacity
120VAC, 3-wire systems
Test Duration
Current (mA)
3
5
6
7
10
Size
Time Duration (Sec.)
15
5
4
3
2
5-3/8" x 2-5/8" x 1-3/4" (137 mm x 67 mm x 44 mm)
Cord Length
16" (406 mm)
Weight
0.5 lb. (227 g)
Accuracy
Current: 10% at nominal voltage; time: 1.5%
Measurement Category CAT II, 150V
Testing & Measurement
CAT. No.
GFCI and Circuit Tester
UPC No.
Description
5708
5708-C*
34523
07640*
GFCI and Circuit Tester
GFCI and Circuit Tester
* Includes Certificate of Calibration
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
= Replacement Part
= Accessory
393
INTERNATIONAL
120VAC, 3-wire systems
4-second interval between mA test impulses; 200 ms pulse duration
5-3/8" x 2-5/8" x 1-3/4" (137 mm x 67 mm x 44 mm)
16" (406 mm)
0.5 lb. (227g)
Current: 10% at nominal voltage; Time: approx. 12%
CAT II, 150V
CANADA
Capacity
Time
Size
Cord length
Weight
Accuracy
Measurement Category
Tel: 800.435.0786
Fax: 800.524.2853
SPECIFICATIONS
USA
CAT. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Allows instant testing of GFCI receptacles or GFCI circuit breaker
protected circuits.
• Checks 120VAC grounded outlets for correct/incorrect wiring.
• LED indicators signal correct wiring, open ground, open neutral,
open hot, hot/ground reversed and hot/neutral reversed.
• Lifetime Limited Warranty
MADE FOR THE TRADE!™
INSULATION TESTING
Insulation Testing Comparison Chart
Testing & Measurement
5990
5882
5880
5778
Test voltage 250V
•
•
500V
•
•
•
•
1000V
•
•
•
•
2500V
•
5000V
•
Range 250V
50k-2000MΩ
0-25MΩ
500V
500k-500GΩ
100k-2000MΩ
100k-2000MΩ
0-50MΩ
1000V
700k-500GΩ
200k-2000MΩ
200k-2000MΩ
0-100MΩ
2500V
5M-500GΩ
5000V
20M-500GΩ
Continuity
0-20Ω
0-20Ω
Resistance
0-400kΩ
0-400kΩ
Digital
Digital
Backlit
•
•
Count
4000
4000
Display type
Analog
Analog bar graph
•
•
II, 300V
II, 300V
UL
•
•
CE
•
•
Measurement Category
III, 600V
•
Analog
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
5kV Megohmmeter
394
• Four test voltages: 500V, 1000V, 2500V, and 5000V.
• Resistance measurement range up to 500GΩ.
• Extra-large analog display for easy viewing.
• Accessories included: (4) 1.5V D batteries, integrated carrying case, test leads,
probes, snap-on test lead pouch.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
5990
87121
86999
07665
87121
86999
5kV Megohmmeter
Probes
Leads
SPECIFICATIONS
Insulation Tests
Test Voltage
Range
Voltage Test Range
Measurement Category
500, 1000, 2500, 5000V
500k to 500GΩ
600V AC/DC
CAT III, 600V
www.greenlee.com
Digital/Analog Megohmmeter
LISTED
SPECIFICATIONS
5883
CAT. No.
UPC No.
Description
5882
5882-C*
5880
5880-C*
5883
87073
07573
07639*
07572
07638*
07591
87073
Digital/Analog Megohmmeter
Digital/Analog Megohmmeter
Digital/Analog Megohmmeter
Digital/Analog Megohmmeter
Remote Probe
Test Lead Kit
* Includes Certificate of Calibration
Manual-Crank Megohmmeter
Insulation Tests
Test Voltage
Range
Automatic Discharge
Continuity Range
Resistance Range
Voltage Test Range
Display
Measurement Category
5882: 250, 500, 1000V
5880: 500, 1000V
250V: 50k – 2000MΩ
500V: 100k – 2000MΩ
1000V: 200k – 2000MΩ
1.5 sec/µF, 300 KΩ impedance
0-20Ω
0-400kΩ
0-600V AC/DC
4000-count, backlit 34-segment analog bar graph
CAT II, 300V
UPC No.
Description
5778
5778-C*
5778TL
34555
07636*
34727
Manual-Crank Megohmmeter
Manual-Crank Megohmmeter
6' (1.83 m) Ext. Leads with Alligator Clamps
Capacity
Megohm Ranges: 25, 50, 100
DC Voltage Ranges: 250, 500, 1000V
MOTOR ROTATION & PHASE SEQUENCE
Non-contact Phase Sequence Indicator
UPC No.
Description
5712
07575
Non-contact Phase Sequence Indicator
SPECIFICATIONS
= new product
= Replacement Part
= Accessory
Frequency Required
Phase Lock
50/60Hz
Holds phase for 12 seconds from last indications.
395
INTERNATIONAL
CAT. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Non-contact detection of phase sequence.
• Self-adjusting to correct phase if line frequency varies.
• Auto shutoff for maximum battery life.
• Proximity sensor means safe, non-contact sequence.
• Accessories included: (1) 9V battery, case.
• Lifetime Limited Warranty
Tel: 800.435.0786
Fax: 800.524.2853
SPECIFICATIONS
CANADA
* Includes Certificate of Calibration
USA
CAT. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Compact, field-ready – does not require batteries or AC power.
• Hand-crank meter designed for non-destructive insulation tests of electrical
installations, machines, equipment, transformers and electric motors.
• Features (3) test voltages and (3) measuring ranges.
• Leather case and leads included.
• Lifetime Limited Warranty
Testing & Measurement
5880 features:
• Auto-ranging AC/DC default voltmeter with test inhibitor and warnings
for enhanced user safety.
• Extra-large digital display with backlight and analog bar graph.
• Weather resistant against dust and water to IP44.
• Multiple test voltage ranges.
• Measure up to 2000MΩ resistance.
• Accessories included: (6) 1.5V AA batteries, test leads, case.
• Lifetime Limited Warranty
5882 adds:
• Tests three voltage ranges: 250, 500, and 1000V.
• Timer function for dielectric absorption and polarization index measurements.
5883 (optional accessory):
• Remote probe, pushbutton and flashlight for added convenience.
MADE FOR THE TRADE!™
Motor Rotation and Phase Sequence Indicator Kit
• Assists in correct motor installation by identifying the phases of a three-phase
circuit and the rotation of an unenergized motor to prevent damage to motor
or electrical system.
• Identifies L1, L2, L3 phases and motor leads and indicates rotation of the motor
before installation.
• Easy clockwise and counterclockwise indication.
• Accessories included: (1) 9V battery, carrying case.
• Lifetime Limited Warranty
LISTED
Testing & Measurement
5702
CAT. No.
UPC No.
Description
5779
TC-20
07576
07535
Motor Rotation and Phase Sequence Indicator Kit
Carrying Case
Specifications
Phase Sequence Indicator (CAT. No. 5702)
Overvoltage Protection CAT III, 600V
5123
Motor Rotation Indicator (CAT. No. 5123)
Two LEDs indicate motor rotation
Do not use Motor Rotation Indicator on live circuits.
Motor Rotation Indicator
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Tests unenergized 3-phase motor to determine sequence for desired
motor rotation.
• Lifetime Limited Warranty
396
CAT. No.
UPC No.
Description
5123
34514
Motor Rotation Indicator
SPECIFICATIONS
Indicators
Two LEDs
Do not use Motor Rotation Indicator on live circuits.
Phase Sequence Indicator
LISTED
• Identifies L1, L2, L3 phases and indicates phase rotation
before installation.
• Clockwise and counterclockwise indication via neon lamps.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
5702
07574
Phase Sequence Indicator
SPECIFICATIONS
Live Phase Indicators
Motor Rotation
Indicators
Measurement Category
Three neon lamps
Two neon lamps
CAT III, 600V
www.greenlee.com
TEMPERATURE
TG-600 Infrared Thermometer
CAT. No.
UPC No. Description
TG-600
09031
Infrared Thermometer
SPECIFICATIONS
Optical Resolution
Target Temperature Range:
Accuracy:
Repeatability:
Response Time:
Emissivity:
12:1 at focus point
-4°F to 932°F (-20°C to 500°C)
±2% or 4°F (±2°C)
Within ±1% of reading or ±2°F (1°C)
500 ms, 95% response
Preset at 0.98
Testing & Measurement
• Safe, non-contact temperature measurement.
• Laser indicates approximate center of the target area.
• Displays temperatures in either Fahrenheit or Celsius.
• Auto power off for longer battery life.
• Easy-to-read backlit display for use in low light conditions.
• Accessories included: (1) 9V battery and carrying case.
• Lifetime Limited Warranty
397
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Accessory
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
= Replacement Part
USA
Tel: 800.435.0786
Fax: 800.451.2632
= new product
MADE FOR THE TRADE!™
Immersion Temperature Probe
Testing & Measurement
• Suitable for liquids and gels.
• Measurement range: -40°F to 1472°F (-40°C to 800°C).
• Probe length: 4.72" ±0.2" (120 mm ±5 mm).
• Accuracy: ±2.2°C (4°F) or 0.75%, whichever is greater.
• Type K thermocouple.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TPI-1
06569
Immersion Temperature Probe
Bead Temperature Probe
• For surface and air/gas temperature measurement.
• Not suitable for liquids.
• Measurement range: -40°F to 399°F (-40°C to 204°C).
• Probe length: 39.4" ±0.2" (1 m ±5 mm).
• Type K thermocouple.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TPB
07592
Bead Temperature Probe
• For flat or slightly convex surfaces, perfect for measurement of hot rollers
and plates.
• Measurement range: -40°F to 932°F (-40°C to 500°C).
• Probe length: 4.72" ±0.2" (120 mm ±5 mm).
• Accuracy: ±2.2°C (4°F) or 0.75%, whichever is greater.
• Type K thermocouple.
• Lifetime Limited Warranty
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Surface Temperature Probe
398
CAT. No.
UPC No.
Description
TPSFC
06570
Surface Temperature Probe
SPECIALTY TESTERS
Sound Level Meter
• Noise measurement adapted to dB(A) weighting.
• Compact and light, easy to take to any site.
• Accessories included: (1) 9V battery.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
93-20
34451
Sound Level Meter
SPECIFICATIONS
Capacity
Audible Range
Frequency
Weight
Size
Low – 35 to 80dB; High – 75 to 120dB
“A” Scale
20-20,000Hz
8 oz. (227g)
6-3/8" x 2-1/2" x 1-1/2" (162 mm x 64 mm x 38 mm)
www.greenlee.com
Digital Light Meter
• Measures incandescent, fluorescent, metal halide, high-pressure sodium
and halogen lamp output.
• Color and cosine-corrected for enhanced accuracy.
• Measures up to 50,000 lux.
• Peak and data hold means no lost measurements.
• Accessories included: (1) 9V battery and carrying case.
• Lifetime Limited Warranty
UPC No.
Description
93-172
93-172-C*
06200
06061
06083
06060
07084*
06200
06061
06083
Digital Light Meter
Digital Light Meter
Carrying Case
Sensor
Sensor Case
* includes Certificate of Calibration
SPECIFICATIONS
Ranges
Foot Candles
Lux
Accuracy
Incandescent Light Source
Other Light Sources
Temperature Range
Sampling Rate
Gas Lamp Tester
0.01-5,000Fc (20/200/2,000/5,000)
0.1-50,000 lux (200/2,000/20,000/50,000)
± 4%
± 7%
0° to 40° C (32° to 104° F)
2.5 times per second
Testing & Measurement
CAT. No.
Weight
Batteries
5715
5713
35450
5710
5786
5783
34529
34528
35450
34525
34574
34556
Gas Lamp Tester
Holster
Battery Door
Antenna
Small Alligator Clamps (2)
Push-on Probes (2)
Lamp Tester
CAT. No.
UPC No.
Description
LT-100
TC-10
07541
07534
Lamp Tester
Deluxe Carrying Case
SPECIFICATIONS
= new product
= Replacement Part
= Accessory
Live Conductor Indication
Continuity Verification
Lamp Tester Voltage
Measurement Category
60-250VAC, 40-60Hz
0-5MΩ (test current: <7µA)
3kV/160kHz (test current:<200µA)
CAT II, 250V
399
INTERNATIONAL
LISTED
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Tests HID and fluorescent lamps.
• Live conductor sensing.
• Compact, rugged housing with carrying case (included).
• Accessories included: (1) 9V Battery
• Lifetime Limited Warranty
CANADA
Size
Description
Tel: 800.435.0786
Fax: 800.524.2853
Voltage – up to 500 VAC & VDC;
Continuity – to 300 kΩ
6" x 2-3/4" x 1-3/4" (152 x 70 x 45 mm);
Antenna – 27" (686 mm)
2.4 lbs. (1.1 kg)
2–9V, included
Capacity
UPC No.
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
CAT. No.
USA
• Test most fluorescent lamps, low pressure sodium vapor, high pressure
sodium discharge lamps, neon tubes, mercury vapor and metal halide
lamps.
• Checks starters, resistors, ignitors, capacitors and photo cells.
• Indicates AC/DC voltage and continuity.
• Includes detachable antenna, batteries, leads, probes, clamps and holster.
• Lifetime Limited Warranty
MADE FOR THE TRADE!™
ACCESSORIES
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Testing & Measurement
Fused Test Leads
400
• High breaking capacity fuse in each lead for safety.
• 39" (1 m) long flexible silicon insulated wire.
• Right angle meter plugs.
• Set of 2 leads, one black, one red.
• Measurement Category III, 1000V and CAT IV, 600V per CAN/CSA C22.2
No. 61010-1 and 61010-031, and UL-61010-1 and 61010-031.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TFL-1
TFL-1R
12028
12848
Fused Test Leads
(2) Replacement Fuses
Deluxe Electrical Test Lead Kit
• Kit contains: (2) modular test probes with sharp stainless steel tip, (2) 48"
(1.2 m) flexible test leads with straight and right angle meter plugs, two each
of Grabber clips with alligator tips (TGA-2), pincer tips (TGP-2), hook tips
(TGH-2),large alligator clips, and a nylon carrying case.
• Measurement Category: CAT III, 1000V per IEC 61010.
• Maximum current 10 amps.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TDTLK
07524
Deluxe Electrical Test Kit
Industrial Test Lead Kit
• Kit contains: (2) modular test probes with sharp stainless steel tip, (2) 48"
flexible test leads with straight and right angle meter plugs, Grabber clips
with alligator tips (TGA-2), and a nylon carrying case.
• Measurement Category: CAT III, 1000V per IEC 61010.
• Maximum current 10 amps.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TITLK
07523
Industrial Test Lead Kit
Test Lead Kit
LISTED
• Kit contains: (1) 48" (1.2 m) long insulated test leads (TTL-3),
(2) modular test probes.
• Measurement Category: CAT III, 1000V; CAT IV, 600V per UL 61010.
• Maximum current 10 amps.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TLK-1
12035
Test Lead Kit
www.greenlee.com
Medium Alligator Clips
LISTED
CAT. No.
UPC No.
Description
TMA-3
12031
Medium Alligator Clips
Extra-Large Alligator Clips
• Insulated clip with sheathed receptacle.
• For use with test leads and test lead kits, CAT. Nos. TTL-3, TLK-1,
TITLK, and TDTLK.
• Set of 2 clips, one black, one red.
• Jaw opens to 1" (25.4 mm).
• Measurement Category IV, 600V; Category III, 1000V per UL-61010.
• Maximum current 10 amps.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TLA-3
12032
Extra-Large Alligator Clips
Testing & Measurement
• Insulated clip with sheathed receptacle.
• For use with test leads and test lead kits, CAT. Nos. TTL-3, TLK-1, TITLK,
and TDTLK.
• Set of 2 clips, one black, one red.
• Jaw opens to 0.71" (18 mm).
• Measurement Category III, 600V per UL-61010
• Maximum current 10 amps.
• Lifetime Limited Warranty
Grabber with Alligator Tip
TGA-2
07516
Grabber with Alligator Tip
Grabber with Hook Tip
= Replacement Part
= Accessory
UPC No.
Description
TGH-2
07519
Grabber with Hook Tip
401
INTERNATIONAL
= new product
CAT. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Sheathed receptacle for protection.
• For use with test lead and test kits, CAT. Nos. TTL-3, TLK-1, TITLK, and TDTLK.
• Set of 2 clips, one black, one red.
• Overall length 5.98" (152 mm).
• Hooks onto terminals up to 0.08" (2.2 mm) in diameter.
• Measurement Category III, 1000V per IEC 61010.
• Maximum current 10 amps.
• Lifetime Limited Warranty
CANADA
Description
USA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
CAT. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Sheathed receptacle for protection.
• For use with test lead and test kits, CAT. Nos. TTL-3, TLK-1, TITLK,
and TDTLK.
• Set of 2 clips, one black, one red.
• Overall length 6.2" (158 mm).
• Attaches to terminals up to 0.375" (9.5 mm) in diameter.
• Measurement Category III, 1000V per IEC 61010.
• Maximum current 10 amps.
• Lifetime Limited Warranty
MADE FOR THE TRADE!™
Insulated Test Leads
Testing & Measurement
LISTED
INTERNATIONAL
UPC No.
Description
TTL-2
07520
Insulated Test Leads
• 39" (1 m) long flexible silicon insulated wire.
• Right-angle meter plugs.
• Comfort-grip overmolded probes.
• Gold plated tips for low contact resistance.
• Set of 2 leads, one black, one red.
• Measurement Category IV, 1000V per UL-61010
• Maximum current 10 amps.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TSG-3
12034
Sure-Grip Test Leads
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
CANADA
CAT. No.
Sure-Grip Test Leads
LISTED
USA
• 48" (1.2 m) long flexible silicon insulated wire.
• Straight and right-angle meter plugs.
• Set of 2 leads, one black, one red.
• For use with T-series Greenlee Test Instrument accessories.
• Measurement Category III, 1000V; CAT IV, 600V per UL-61010.
• Maximum current 10 amps.
• Lifetime Limited Warranty
402
Thermocouple Adapter
• Allows temperature probes with miniconnectors to be used with DMMs
or clamp meters that are designed with a temperature measurement function
via a banana jack input.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TA
07525
Thermocouple Adapter
www.greenlee.com
93-30 Line Splitter (NEMA 5-15)
• For use with all models of clamp-on meters.
• Splits lines for independent testing with clamp-on meter.
• Lifetime Limited Warranty.
CAT. No.
UPC. No.
Description
93-30
34452
93-30 Line Splitter (NEMA 5-15)
SPECIFICATIONS
4-5/8" x 1-3/4" (118 mm x 45 mm)
0.1 lb. (45g)
Deluxe Carrying Case
• Durable nylon carrying case.
• Inside pocket for test leads.
• With carry strap and double-stitched belt loop.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TC-5
07588
Deluxe Carrying Case
Testing & Measurement
Size
Weight
SPECIFICATIONS
Size
7-3/4" x 3" x 1-1/2" (196.9 mm x 76.2 mm x 38.1 mm)
Deluxe Carrying Case
UPC No.
Description
TC-10
07534
Deluxe Carrying Case
9-3/8" x 3-1/8" x 1-3/4" (240 mm x 80 mm x 45 mm)
= Replacement Part
= Accessory
403
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
Size
Tel: 800.435.0786
Fax: 800.524.2853
SPECIFICATIONS
USA
CAT. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Durable nylon carrying case.
• Inside pocket for test leads.
• With carry strap and double-stitched belt loop.
• Lifetime Limited Warranty
MADE FOR THE TRADE!™
Deluxe Carrying Case
Testing & Measurement
• Durable nylon carrying case.
• Inside pocket for test leads.
• With carry strap and double-stitched belt loop.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TC-15
07595
Deluxe Carrying Case
SPECIFICATIONS
Size
11-1/4" x 3" x 2" (285.8 mm x 76.2 mm x 50.8 mm)
Deluxe Carrying Case
• Durable nylon carrying case.
• Inside pocket for test leads.
• With carry strap.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TC-30
07536
Deluxe Carrying Case
SPECIFICATIONS
Size
11-1/4" x 4-1/2" x 2 1/8" (285 mm x 115 mm x 55 mm)
• Durable nylon carrying case.
• Inside pocket for test leads.
• Elastic straps inside to hold multiple instruments.
• With carry strap.
• Lifetime Limited Warranty
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Deluxe Carrying Case
404
CAT. No.
UPC No.
Description
TC-20
07535
Deluxe Carrying Case
SPECIFICATIONS
Size
7-3/4" x 6-1/4" x 2" (196.9 mm x 158.8 x 50.8 mm)
Deluxe Carrying Case
• Durable nylon carrying case.
• Inside pocket for test leads.
• With carry strap.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TC-40
19216
Deluxe Carrying Case
SPECIFICATIONS
Size
7-1/4" x 5-1/2" x 2 3/4" (185 mm x 132 mm x 70 mm)
www.greenlee.com
Deluxe Carrying Case
• Durable nylon carrying case.
• Inside pocket for test leads.
• Elastic straps inside to hold multiple instruments.
• With carry strap.
• Lifetime Limited Warranty
UPC No.
Description
TC-28
07715
Deluxe Carrying Case
SPECIFICATIONS
Size
9" x 6-1/4" x 2" (228.6 mm x 158.8 mm x 50.8 mm)
Deluxe Carrying Case
• Durable nylon carrying case.
• Velcro open/close flap for easy access.
• Inside pocket for test leads.
• With carry strap and double-stitched belt loop.
• Lifetime Limited Warranty
CAT. No.
UPC No.
Description
TC-50
07746
Deluxe Carrying Case
Testing & Measurement
CAT. No.
SPECIFICATIONS
Size
8-1/4" x 6" x 2" (210 mm x 152 mm x 51 mm)
UPC No.
Description
TC-55
07747
Deluxe Carrying Case
Size
11-1/2" x 6" x 2" (292.1 mm x 152.4 mm x 51 mm)
Tel: 800.435.0786
Fax: 800.524.2853
SPECIFICATIONS
= Replacement Part
= Accessory
405
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
CAT. No.
Tel: 800.435.0786
Fax: 800.451.2632
• Durable nylon carrying case.
• Velcro open/close flap for easy access.
• Inside pocket for test leads.
• With carry strap and double-stitched belt loop.
• Lifetime Limited Warranty
USA
Deluxe Carrying Case
MADE FOR THE TRADE!™
406
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
0.63 A
500 V
150,000
0.63 A
660 V
30,000
10 A
250 V
200
Bussman GDA-500mA
Littelfuse 216.500
Bussman DMM-B-44/100
Littelfuse FLU.44
Ferraz FSM44/100
Ferraz 500V FA 0.63A 6,3x32
Siba 189 020.0.630
Ferraz 660V FA 0,63A 6,3x32
Bussman AGC-10
Catalog numbers TTL-3, TSG-3, TFL-1, TLK-1, TITLK, and TDTLK are compatible with all Greenlee
instruments with IEC-compliant shrouded banana jacks. Note: Need to make sure Replacement leads
match Category ratings.
11372
✓
✓
10 A
600 V
100,000
11 A
1000 V
10,000
12.5 A
500 V
20,000
15 A
600 V
100,000
Bussman KTK-15
Littelfuse KLK-15
0.44 A
1000 V
10,000
Ferraz 500V FA 12,5A 6,3x32
Siba 189 020.12.5
500 mA
250 V
1,500
Bussman DMM-B-11-A
Littelfuse FLU011
Ferraz FSM11
315 mA
250 V
1,500
Bussman KTK-10
Littelfuse KLK-10
160 mA
250 V
1,500
Bussman GDA-315mA
Littelfuse 216.315
•
•
•
Test Lead Kit CompatibIlity
CMT-80
CSJ-100
•
•
Bussman GDA-160mA
Littelfuse 216.160
AM-6
DM-20
DM-40
DM-60
DM-200
DM-200A
DM-210
DM-210A
DM-310
DM-330
DM-350
DM-500
DM-510
DM-510A
DM-800
DM-810
DM-810A
DM-820
DM-820A
DM-830A
DM-860
DML-430
DML-430A
DML-54
5878
5880
5882
FUSE RATINGS
AMPERAGE
VOLTAGE
INTERRUPTING
RATING (AMPS)
SUITABLE
FUSES
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Testing & Measurement
Fuse Selection Guide
software Compatibility
DM-200
DM-200A
DM-210
DM-210A
DM-510A
DM-800
DM-810
DM-810A
DM-820
DM-820A
DM-830A
DM-860
DML-54
DML-430
DML-430A
DMSC-2U
•
•
•
•
•
DMSC-9U
DMSC-2
•
DMSC-9
•
•
•
•
•
•
•
•
•
•
•
www.greenlee.com
Instrument Case Compatibility
Case Catalog No.
Case UPC No.
TC-5
07588
CM-330
•
CM-410
•
CM-450
•
TC-10
07534
•
CM-800 Series
•
CM-900 Series
•
TC-28
07715
TC-30
07536
CM-1300 Series
•
CM-1500 Series
•
CMA-40
TC-40
19216
TC-50
07746
TC-55
07747
•
CMA-60
•
CMAF Series
•
•
CMI-100
•
•
CMI-200
•
•
CMP-200
•
•
CMT-80
•
CMT-90
•
CSJ-100
•
DM-20
•
DM-40
•
DM-200 Series
•
•
DM-300 Series
•
•
DM-500 Series
•
•
DM-800 Series
•
•
DML Series
•
•
GT-65
•
GT-95
•
•
GT-540
•
•
LT-100
•
2010
•
5702
•
•
•
5708i
•
•
•
5779
•
= Replacement Part
= Accessory
Tel: +1.815.397.7070
Fax: +1.815.397.9247
5723
407
INTERNATIONAL
5708
CANADA
•
Tel: 800.435.0786
Fax: 800.524.2853
GT-220
USA
•
Tel: 800.435.0786
Fax: 800.451.2632
DM-60
= new product
Testing & Measurement
CM-600 Series
TC-20
07535
USA
Tel: 800.435.0786
Fax: 800.451.2632
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Testing & Measurement
MADE FOR THE TRADE!™
NOTES
408
Hydraulic Pumps &
Miscellaneous
The professional contractor looks to Greenlee for
exceptional bolt cutters, hydraulic pumps,
accessories and a variety of rope. Each product is
designed to make your job faster, safer
and easier – get the job done right with
Greenlee. To choose the right tool for your
job, contact customer service or see
your local Greenlee distributor.
Contents
Bolt Cutters
Hydraulic Pumps
Accessories
Touch-up Paint
Hydraulic Oil
Rope
Cutting/Threading Oil
428
430
433
434
434
434
435
MADE FOR THE TRADE!™
MADE FOR THE TRADE!™
BOLT CUTTERS
Hydraulic Pumps & Miscellaneous
Heavy-Duty Bolt Cutters with Fiberglass Handles
• Unique cam bolt blade adjustment for easy cutter alignment.
• Forged steel blades for long life.
• Clevis-mounted blades for greater strength.
• Custom rubber grips for maximum power.
• Fiberglass handles are tough and lightweight.
SPECIFICATIONS
Capacity Rb85* Rc40*
5/16" (7.9 mm)
HDFBC18
7/32" (5.6 mm)
3/8" (9.5 mm)
HDFBC24
9/32" (7.1 mm)
1/2" (12.7 mm)
HDFBC30
5/16" (7.9 mm)
5/8" (15.9 mm)
HDFBC36
11/32" (8.7 mm)
*Indicates bolt hardness in Rockwell units
Cat. No.
UPC No. Description
HDFBC18
11277
HDFBC24
11278
HDFBC30
11279
HDFBC36
11280
11367
11342
11344
11346
11367
11342
11344
11346
Heavy-Duty Bolt Cutter with Fiberglass Handles
18 in. (457 mm) Long
Heavy-Duty Bolt Cutter with Fiberglass Handles
24 in. (610 mm) Long
Heavy-Duty Bolt Cutter with Fiberglass Handles
30 in. (762 mm) Long
Heavy-Duty Bolt Cutter with Fiberglass Handles
36 in. (914 mm) Long
Blade Unit for HDFBC18
Blade Unit for HDFBC24
Blade Unit for HDFBC30
Blade Unit for HDFBC36
Weight
HDFBC18 – 3.4 lbs. (1.5 kg); HDFBC24 – 10.3 lbs. ( 4.7 kg)
HDFBC30 – 4.9 lbs. (2 kg); HDFBC36 – 7.6 lbs. (3.4 kg)
Heavy-Duty Bolt Cutters
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Unique cam bolt blade adjustment for easy cutter alignment.
• Forged steel blades for long life.
• Clevis-mounted blades for greater strength.
• Custom rubber grips for maximum power.
428
SPECIFICATIONS
Capacity Rb85* Rc40*
HDBC24
3/8" (9.5 mm)
9/32" (7.1 mm)
HDBC30
1/2" (12.7 mm)
5/16" (7.9 mm)
HDBC36
5/8" (15.9 mm)
11/32" (8.7 mm)
HDBC42
3/4" (19.1 mm)
3/8" (9.5 mm)
*Indicates bolt hardness in Rockwell units
Weight
HDBC24 – 5.8 lbs. (2.6 kg); HDBC30 – 8.9 lbs. (4 kg);
HDBC36 – 13.3 lbs. (6 kg); HDBC42 – 19.8 lbs. (9 kg)
Cat. No.
UPC No.
Description
HDBC24
HDBC30
HDBC36
HDBC42
11342
11344
11346
11348
11273
11274
11275
11276
11342
11344
11346
11348
Heavy-Duty Bolt Cutter - 24 in. (610 mm) Long
Heavy-Duty Bolt Cutter - 30 in. (762 mm) Long
Heavy-Duty Bolt Cutter - 36 in. (914 mm) Long
Heavy-Duty Bolt Cutter - 42 in. (1067 mm) Long
Blade Unit for HDBC24
Blade Unit for HDBC30
Blade Unit for HDBC36
Blade Unit for HDBC42
www.greenlee.com
Bolt Cutters
• Unique cam bolt blade adjustment for easy cutter alignment.
• Forged steel blades for long life.
• Clevis-mounted blades for greater strength.
• Custom rubber grips for maximum power.
UPC No.
Description
BC14
BC18
BC24
BC30
BC36
11281
11301
11306
11316
11321
11267
11268
11269
11270
11271
11281
11301
11306
11316
11321
Standard Bolt Cutter - 14 in. (356 mm) Long
Standard Bolt Cutter - 18 in. (457 mm) Long
Standard Bolt Cutter - 24 in. (610 mm) Long
Standard Bolt Cutter - 30 in. (762 mm) Long
Standard Bolt Cutter - 36 in. (914 mm) Long
Blade Unit for BC14
Blade Unit for BC18
Blade Unit for BC24
Blade Unit for BC30
Blade Unit for BC36
Weight
BC14 – 2.4 lbs. (1.1 kg); BC18 – 3.4 lbs. (1.5 kg);
BC24 – 5.8 lbs. (2.6 kg); BC30 – 8.9 lbs. (4 kg);
BC36 – 13.3 lbs. (6 kg)
Threaded Rod Cutter
Capacity
Description
36587
37186
37187
36587
37186
37187
Threaded Rod Cutter
1/4" - 20 Cutting Die Set
3/8" - 16 Cutting Die Set
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
429
= new product
CANADA
UPC No.
Tel: 800.435.0786
Fax: 800.524.2853
Weight
1/4" - 20 soft steel rod (6.4 mm);
3/8" - 16 soft steel rod (9.5 mm)
14.1 lbs. (6.4 kg)
Cat. No.
USA
SPECIFICATIONS
Tel: 800.435.0786
Fax: 800.451.2632
• One stroke cuts through threaded rod.
• Cuts clean, eliminating the need to grind or file before threading
a nut onto cut end.
• Wide base for stable cutting. Includes mounting hole for fast and easy
permanent mounting to work surface.
• Strong forged steel cutting head with tool steel cutting die for long life.
• Includes: Threaded Rod Cutter, 1/4"- 20 Cutting Die Set,
3/8"- 16 Cutting Die Set.
Hydraulic Pumps & Miscellaneous
SPECIFICATIONS
Capacity Rb85* Rc40*
BC14
1/4" (6.4 mm)
3/16" (4.8 mm)
BC18
5/16" (7.9 mm)
1/4" (6.4 mm)
BC24
3/8" (9.5 mm)
5/16" (7.9 mm)
BC30
1/2" (12.7 mm)
11/32" (8.7 mm)
BC36
5/8" (15.9 mm)
3/8" (9.5 mm)
*Indicates bolt hardness in Rockwell units
Cat. No.
MADE FOR THE TRADE!™
HYDRAULIC PUMPS
Hydraulic Pumps & Miscellaneous
High-Pressure Hydraulic Hand Pump
• Portable and powerful, for use with Greenlee Benders.
• Versatile, operates in any position.
• Steel pump body and handle with rubber grip.
• Wide base for stability.
• Mounting holes for permanent positioning.
• Includes 3/8" (9.5 mm) female hydraulic connector and dust cap.
Weight
Cat. No. UPC No. Description lbs.
kg
SPECIFICATIONS
755
15677
High-Pressure Hydraulic Hand Pump
Operation
Capacity
Length
Width
Height
18272
18272
Seal Kit
Manual – Hand
10,000 psi (700 bar), .161 in³ (26 mm³) per stroke
25-1/2" (648 mm)
7" (178 mm)
6" (152 mm)
18
8.2
NOTE: See page 433 to select the proper hydraulic hose for this pump.
Hydraulic Hand Pump
• Lightweight and portable, for use with Greenlee Punch Drivers.
• Versatile, operates in any position.
• Single speed.
• Rugged steel pump body/reservoir with cast aluminum handle.
• Has mounting holes for easy, permanent mounting.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Weight
Cat. NO.
UPC No.
Description lbs. kg
430
767
13284
Hydraulic Hand Pump
04343
04343
Seal Kit Repair for Serial Code ABM
13800
13800
*Seal Kit Repair for Serial Code 55D & Up
30242
30242
*Seal Kit Repair for Serial Code 68BG TO BG33181628,
BG331816 & Up
30241
30241
Reservoir Follower
*NOTE: Must also purchase 30241 Follower
SPECIFICATIONS
Operation
Capacity
Length
Width
Height
Manual – Hand
6,500 psi (448 bar), .0823 in³ (13 mm³) per stroke
13" (330 mm)
4" (102 mm)
4" (102 mm)
NOTE: See page 433 to select the proper hydraulic hose for this pump.
6
2.7
www.greenlee.com
Hydraulic Foot Pump
Weight
Cat. NO.
UPC No.
Description lbs.
kg
1725
31353
Hydraulic Foot Pump
24496
24496
Seal Kit w/ RD Serial Code
25214
25214
Seal Kit w/ RU Serial Code
33336
33336
Seal Kit w/ VK Serial Code
11
5
SPECIFICATIONS
Operation
Capacity
Length
Height
Width
Hand-Operated Hydraulic Pump
Manual – Foot
6,500 psi (448 bar), .117 in³ (19 mm³) per stroke
16" (406 mm)
Pedal down 6" (152 mm), Pedal up 12" (305 mm)
8" (203 mm)
NOTE: See page 433 to select the proper hydraulic hose for this pump.
• Two-speed hydraulic pump. Ideal for use with remote cutting and
crimping tools.
• Compact and lightweight – easy to move around jobsites.
• Solid base with wide legs provides for good stability during operation.
• Built-in carrying handle.
• Large, easy-to-grasp, retraction wheel.
• Equipped with 3/8" female screw-type hydraulic coupler.
Hydraulic Pumps & Miscellaneous
• Free both hands to position and hold the working tool.
• Foot activated release lever.
• Hold-down pin keeps pedal down for storage and transport.
• Angled base bar keeps the pump upright and stable.
• Includes 1/4" (6.4 mm) female coupler with dust cap.
Weight
Cat. No.
UPC No.
Description lbs. kg
7475H
07475
Hand-Operated Hydraulic Pump
18 8.2
07829
07829
Seal Kit
Weight
Cat. No.
UPC No.
Description lbs. kg
975
33516
Electric Hydraulic Pump
51
23
34369
34369
Seal Kit
SPECIFICATIONS
Operation
Capacity
Length
Width
Height
= new product
= Replacement Part
= Accessory
120 VAC 1/2 HP (.375 kW)
10,000 psi (700 bar); 250 inch³ (4 L) per minute rapid advance;
18 inch³ (.32 L) per minute at full pressure
12" (305 mm)
10" (254 mm)
15-1/2" (394 mm)
NOTE: See page 433 to select the proper hydraulic hose for this pump.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
431
INTERNATIONAL
• Useable oil volume: 3 quarts (2.8 liters).
• For use with Greenlee 2" capacity benders.
• Automatic or manual ram-return selector valve provides more control from
the pendant switch.
• Molded enclosure protects pump, motor and circuitry in tough working
environments.
• Use with single-hose hydraulic systems with spring-return rams.
CANADA
NOTE: See page 433 to select the proper hydraulic hose for this pump.
Tel: 800.435.0786
Fax: 800.524.2853
Electric Hydraulic Pump
10,000 psi (700 bar)
0.75 quart (0.74 liter)
0.82 cu in/stroke
0.16 cu in/stroke
25" (635 mm)
5-5/8" (143 mm)
5-1/2" (140 mm)
USA
Max output pressure
Useable oil capacity
1st stage oil volume (200 psi)
2nd stage oil volume (10,000 psi)
Length (including coupler)
Width
Height
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
MADE FOR THE TRADE!™
Electric Hydraulic Pump
Hydraulic Pumps & Miscellaneous
• Useable oil volume: 6-1/4 quarts (5.9 liters)
• For use with all Greenlee benders.
• Solid state controls for added reliability.
• Low pressure for fast ram advance, automatically changes to low volume
high pressure.
• Pendant control for advance, valve on pump for release.
• Use with single-hose hydraulic systems with spring-return rams.
• Equipped with four swivel casters.
• Cast aluminum reservoir for long life.
Weight
Cat. No.
UPC No.
Description lbs. kg
960 SAPS
18297
Electric Hydraulic Pump
92
42
18416
18416
Seal Kit
SPECIFICATIONS
Operation
Capacity
120 VAC 1-1/2 HP (1.12 kW)
10,000 psi (700 bar); 300 inch³ (4.8 L) per minute rapid advance;
54 inch³ (.9 L) per minute at full pressure
12" (305 mm)
10-3/4" (223 mm)
22-5/16" (567 mm)
Length
Width
Height
NOTE: See page 433 to select the proper hydraulic hose for this pump.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Electric Hydraulic Pump
• Useable oil volume: 6 quarts (5.7 liters).
• For use with all Greenlee benders.
• Handy pendant advance control on 980 and 980-22PS.
• Low voltage pendant coupled to solid state motor controls eliminates
contact arcing for greater reliability and longer life.
• Automatic or manual ram return selector valve provides
more control from the pendant switch.
• Molded enclosure protects pump, motor and circuitry
in tough working environments.
• Use with single-hose hydraulic systems with spring-return rams.
Weight
Cat. No.
UPC No. Description lbs. kg
980
33515
Electric Hydraulic Pump with Pendant
71
32
980-22
36314
Electric Hydraulic Pump
71
32
980-22PS
36313
Electric Hydraulic Pump with Pendant Switch 71
32
34369
34369
Seal Kit
Note: 980-22 is 220V pump only, no control switch
USA
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
Operation
Capacity
Length
Width
Height
980 – 120 VAC 1-1/2 Hp (1.12 kW)
980-22PS – 220 VAC 50Hz 1-1/2 Hp (1.12 kW)
10,000 psi (700 bar); 250 inch³ (4 L) per minute rapid
advance; 54 inch³ (.9 L) per minute at full pressure
12" (305 mm)
12" (305 mm)
17-1/2" (445 mm)
NOTE: See page 433 to select the proper hydraulic hose for this pump.
432
www.greenlee.com
ACCESSORIES
Hydraulic Hose Selection Guide
Pump Cat. No. Hose Cat./UPC No.
767
38316
1725
37729
975
17707
755, 975, 980 or 960SAPS
11289
755 or 975
11289
1725
37729
755 or 975
11289
755 or 975
11289
980 or 960SAPS
11289
980 or 960SAPS
11289
767
38316
1725
37729
755 or 975
11289
7475H, 975 or 980
05850, 05851
7475H, 975 or 980
05850, 05851
7475H, 975 or 980
05850, 05851
7475H, 975 or 980
05850, 05851
7475H, 975 or 980
05850, 05851
Hydraulic Hose Units
• High pressure hydraulic hose units for use with Greenlee hydraulic
pumps.
• Equipped with couplers and dust caps.
11289*
17707*
11289
17707
37729*
38316
37729
38316
06302
06302
Description
1 0' X 1/4" Hose With (1) 3/8" Male Coupler and (1) 3/8" Female Coupler
10' X 1/4" Non-Conductive Hose with (1) 3/8" Male Coupler and
(1) 3/8" Female Coupler
6' X 3/8" Hose with (2) 3/8" Male Couplers
10' X 1/4" Hose with (1) 3/8" Male Coupler and
(1) 1/4" Male Coupler
10' X 1/4" Hose with (2) 1/4" Male Couplers
3' X 1/4" Hose with (1) 1/4" Male Coupler and
(1) 1/4" NPT Swivel Threaded Fitting
3' X 1/4" Hose with (1) 1/4" NPT Male Threaded Fitting
and (1) 1/4" NPT Swivel Threaded Fitting
433
= new product
= Replacement Part
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
38316
1
1
Coupler Set
Cat./UPC No.
3548GB/
37614 20573
1
1
1
1
1
1
Tel: 800.435.0786
Fax: 800.524.2853
Hose Unit Cat./UPC No.
Cat. No. UPC No. Description
05850 05851 11289 17707 37729
54167
54167
1/4" (6.4 mm) Female Coupler without Dust Cap
54168
54168
1/4" (6.4mm) Dust Cap for Female Coupler
54169
54169
1/4" (6.4 mm) Male Coupler without Dust Cap
1
2
1
2
54170
54170
1/4" (6.4 mm) Dust Cap for Male Coupler
4018GB 50807
3/8" (9.6 mm) Female Coupler with Dust Cap
2
1
4033GB 50823
3/8" (9.6 mm) Male Coupler with Dust Cap
41877
41877
3/8" (9.6 mm) Female Coupler without Dust Cap
1
1
1
1
41941
41941
3/8" (9.6 mm) Male Coupler without Dust Cap
41834
41834
3/8" (9.6 mm) Dust Cap for 41941/41877 Couplers
2
2
CANADA
* Filled with hydraulic oil.
USA
UPC No.
0 5850
05851
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
05850*
05851*
Hydraulic Pumps & Miscellaneous
Tool Cat. No./Description Tool Coupler
750 Cable Cutter
1/4" Female Coupler
750 Cable Cutter
1/4" Female Coupler
750 Cable Cutter
1/4" Female Coupler
777 Bender
3/8" Female Coupler
782 Bender
3/8" Female Coupler
800 Cable Bender
1/4" Female Coupler
880 Bender
3/8" Female Coupler
882 Bender
3/8" Female Coupler
884 Bender
3/8" Female Coupler
885 Bender
3/8" Female Coupler
1731 C-Frame Punch Driver
1/4" Female Coupler
1731 C-Frame Punch Driver
1/4" Female Coupler
1731 C-Frame Punch Driver
1/4" Female Coupler
SDK202GL Cable Cutter
3/8" Male Coupler
RK06AT, RK06FT
3/8" Male Coupler
RK1230, RK1240, RK1240K
3/8" Male Coupler
RCCX
3/8" Male Coupler
RK1550
3/8" Male Coupler
MADE FOR THE TRADE!™
Greenlee Green Spray Touch-up Paint
Hydraulic Pumps & Miscellaneous
• Closely matches Greenlee painted products.
Cat. No.
UPC No.
Weight
Description lbs. kg
22618
22618
13 oz. (384 ml) Aerosol Can of Greenlee
Green Spray Paint
1.2
.5
10378
10378
13 oz. (384 ml) Aerosol Can of Greenlee
Flat Green Spray Paint*
1.2
.5
NOTE: The color green is a registered trademark for Test Instruments, Job Boxes, Benders and Pulling Equipment.
*Storage Box
Hydraulic Oil
• Greenlee-approved hydraulic oil.
• Specially compounded for use with Greenlee hydraulic equipment.
• Refinery-filtered to give you the finest oil available.
Cat. No.
UPC No.
Weight
Description lbs.
kg
4016 GB
51059
Hydraulic Oil – 1 Gallon (3.8 l)
8.5
3.9
4017 GB
50806
Hydraulic Oil – 1 Quart (.9 l)
2.25
1.02
NOTE: For best operation of your Greenlee hydraulic-powered equipment, use Greenlee hydraulic oil only. (Do not use hydraulic brake
fluid, shock absorber fluid, alcohol, glycerine, caster oil or other non-specified fluid–as they reduce performance and can cause damage
to pumps and equipment.) Use of improper fluids waives the guarantee on Greenlee hydraulic equipment.
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
434
• Not for cable pulling. See the ropes listed with cable pullers
for recommended cable pulling ropes.
• Highly-visible, bright yellow with green tracer, excellent for roping
off areas on construction sites.
• Rot and mildew resistant.
• Weather resistant.
• Economical general purpose rope.
405 Rope Stand
sold separately.
See page 165.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
Polypro General Purpose Rope
Rope Length
3/16"
(4.8 mm)
1/4"
(6.4 mm)
3/8"
(9.5 mm)
1/2"
(12.7 mm)
Cat. NO.
Average Weight
UPC No. Breaking Strength lbs.
kg.
250'
76 m
408
21467
720 lbs.
3.2 kN
3
1.4
600'
182 m
409
21468
720 lbs.
3.2 kN
6
2.7
250'
76 m
412
21471
1130 lbs.
5.0 kN
4
1.8
600'
182 m
413
21472
1130 lbs.
5.0 kN
9
4.1
1,000' 304 m
414
21474
1130 lbs.
5.0 kN
13
5.9
250'
76 m
417
21477
2430 lbs.
10.8 kN
9
4.1
600'
182 m
418
21520
2430 lbs.
10.8 kN
19
8.6
250'
76 m
421
21480
3780 lbs.
16.8 kN
15
6.8
600'
182 m
422
21521
3780 lbs.
16.8 kN
35
15.9
www.greenlee.com
Chain-Type Pipe Vise
Cat. No.
UPC No.
Description
467
27318
Chain-Type Pipe Vise
SPECIFICATIONS
Capacity
1/8" - 5" (3.2 mm x 127 mm) pipe
Weight
17 lbs. (7.7 kg)
Cutting/Threading Oil
• Premium quality, high lubricity for easier cutting and long tool life.
• Choice of light or dark.
Cat. No.
UPC No.
Description
462B
462-Q
462-1
463-Q
463-1
11412
28237
26096
28238
28239
Dark Cutting/Threading Oil - 1 Pt.
Dark Cutting/Threading Oil - 1 Qt.
Dark Cutting/Threading Oil - 1Gal
Light Cutting/Threading Oil - 1 Qt
Light Cutting/Threading Oil - 1 Gal
Weight
462-Q, 463-Q
1 Qt. (.9 l)
2.3 lbs. (1 kg)
462-1, 463-1
1 Gal. (3.8 l)
8.7 lbs. (4 kg)
= Accessory
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Replacement Part
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
435
= new product
USA
Cat. No. Size
Tel: 800.435.0786
Fax: 800.451.2632
SPECIFICATIONS
Hydraulic Pumps & Miscellaneous
• Use with a wide range of sizes of pipe or conduit.
• Built-in pipe rest.
• To prevent marring of plastic or plastic coated pipe, vise jaws can be
rotated with smooth side up. Use serrated side for harder materials.
• Chain design holds pipe securely to prevent it from twisting or turning
during threading.
USA
Tel: 800.435.0786
Fax: 800.451.2632
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Hydraulic Pumps & Miscellaneous
MADE FOR THE TRADE!™
NOTES
436
Plumbing
Greenlee offers a full mix of plumbing and pipe-fitting
tools through their joint venture with Rothenberger,
a recognized global leader of tools and equipment
to the plumbing industry. From sharp hand-held
PVC cutters like the ROCUT to powerful
pipe threaders like the SuperTronic
2000, Rothenberger and Greenlee
have teamed up to offer the best
selection of tools for the job.
Contents
Power Benders
Hand Threaders
Portable Power Threaders
Accessories - Hand & Power Threaders
Power Drives
Compact Threading Machines
Threading Accessories
Vises & Stands
Production Cutting Machines
Press Tools
Pliers & Pipe Wrenches
Tube Cutters
Deburring & Reaming Tools
Installation Tools
Pipe Freezing
Soldering & Brazing Torches
Pipe & Drain Inspection Systems
Drain Cleaning Equipment
Test Pumps
438
439
440
441
442
443
447
448
449
450
454
456
460
460
461
461
463
464
465
MADE FOR THE TRADE!™
MADE FOR THE TRADE!™
POWER BENDERS
ROBEND® 3000
Tough, portable power bender. Universal applications in plumbing, heating,
refrigeration, climate control, and industrial systems. Eliminates purchase
and storage of fittings.
Plumbing
Cold bending up to 180°, manually or automatically, of tubes made of:
– Soft, semi-hard, hard copper, DIN EN 1057, dia. 1/2” – 1-1/8”
(12 mm – 28 mm)
– Coated copper, precision steel, dia. 1/2” – 1-1/8” (12 mm – 28 mm)
– Soft, half-hard, hard precision steel, DIN 2391/2393/2394,
dia. 1/2” – 1-1/8” (12 mm – 28 mm)
– Threaded steel, DIN 2440/2441, dia. 1/2” – 1-1/8” (12 mm – 28 mm)
– Seamless stainless steel GW 541, wall thickness 0.04” – 0.05”
(1.0mm – 1.2mm), dia. 1/2” – 1-1/8” (12 mm – 28 mm)
– Coated steel tubes MPS-H heating type, DIN EN 2394, dia. 1/2” – 1-1/8”
(14 mm – 30 mm)
• Forged aluminum former with bending radius scale
• Special ROLUB guide shoe reduces friction for bending without deformation
and wrinkles
• Powerful 1010 W motor: Ideal for use on construction sites
• Automatically shuts off when preset bending angle is obtained for
fast batch production
Cat. No. Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
25001
Bending radius
lb
30.0
1.77”
2.20”
3.15”
3.46”
4.41”
4.41”
5.0
5.0
5.0
6.0
5.0
6.0
0.5
16.5
• Body made of diecast steel: Tough and long-lasting
• Plastic bending formers and supports with low friction for optimum
bending results
• Open bending frame for production of repeated alternate angled bends
• Universal supports for bending of copper or non-coated tubes
• Pliers with bayonet catch: bending formers easily changeable
Cat. No. Description
23022X
23064
23000
23001
23010
Set includes basic tool (23000),
bending support (23001), bending
formers, and steele case.
23011
23012
23013
23022X
438
25652R
25616
25619
25622
25625
25626
25120
58182
ROBEND® 3000 Set 1/2", 5/8", 3/4",
7/8", 1 1/8"
Bending Formers: 1/2" O.D. Copper
Bending Formers: 5/8" O.D. Copper
Bending Formers: 3/4" O.D. Copper
Bending Formers: 7/8" O.D. Copper
Bending Formers: 1" O.D. Copper
Bending Formers: 1 1/8" O.D. Copper
Bending spray 5.3oz (150 ml)
Tripod
Tube Bender Maxi
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Set includes basic ROBEND®
unit, guide shoe axle (25743),
bending formers and guide
shoes for corresponding tube
diameters, adapter for tri-pod
base, plastic case.
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
25001
23014
MAXI BENDER Set 3/2", 1/2", 5/8",
3/4", 7/8"
MAXI BENDER MSR Set 1/2”, 3/4”, 1”,
Viega FostaPex
MAXI BENDER Tool only
MAXI BENDER Support with R/L Formers
Bending Formers:
3/8" O.D. Copper/Aluminum
Bending Formers:
1/2" O.D. Copper/Aluminum
Bending Formers:
5/8" O.D. Copper/Aluminum
Bending Formers:
3/4” O.D. Copper/Aluminum
Bending Formers:
7/8” O.D. Copper/Aluminum
Bending radius
lb
8.5
8.5
2.1
1.2
1.38”
0.2
1.38”
0.2
1.93”
0.3
2.91
0.3
3.43
0.4
www.rothenberger-usa.com
ROFLARE®
• Made from long-lasting, high quality steel
• Mold available in metric and English measurements
• “Multiblock” multi-clamping calipers provide firm, quick, off-center clamping
of the tube and automatic self-centering; tubes don’t slip
• Hardened and polished flare cone: high quality flare sealing surface
• Special screw thread allows smooth, efficient deformation of material
Cat. No.
Description
lb
26038
26022
Single 6 - 8 - 10 - 12 - 14 - 16 mm O.D.
Double 6 - 8 - 10 - 12 - 15 - 16 mm O.D.
requires 26023 to create double flares
Single 3/16” - 1/4” - 5/16” - 3/8” - 1/2” - 5/8” O.D.
37º Single 3/16” - 1/4” - 5/16” - 3/8” - 1/2” - 5/8” O.D.
Single/Double 3/16” - 1/4” - 5/16” - 3/8” - 1/2” - 5/8” O.D.
requires 26034 to create double flares
3.0
3.0
26036
26032
26033
3.0
3.0
3.0
Plumbing
HAND THREADERS
SUPER CUT Ratchet Threader
• Convenient, lockable ratchet direction reversal
• Secure hold with locking retainer - simple insertion and
removal of die heads
• Slim, compact shape with excellent overall size for difficult to
reach positions
• Offset lever provides high leverage
• Fits all ROTHENBERGER hand and electric threaders
• Precision thread cutting to approved standards of NPT dia. 1/4”- 2”
70903X
70901X
SUPER CUT Set, 1/2", 3/4", 1" NPT
SUPER CUT Set, 1/2", 3/4", 1", 1 1/4" NPT
SUPER CUT Set, 1/2", 3/4", 1", 1 1/4",
1 1/2", 2" NPT
SUPER CUT Set, 1/2", 3/4", 1", 1 1/4",
1 1/2", 2" NPT for plastic-coated pipe
Ratchet handle No. 1 1/4" - 1 1/4"
Ratchet handle No. 2 1 1/2" - 2"
Die Head Adapter for die heads up to 1 1/4"
RONOL® Cutting Fluid, 6.7 oz (200 ml)
9.3
15.0
70905X
P70905C
70905X
70840X
71272
71273
65018
20.0
20.0
4.0
4.0
2.0
0.8
SUPER CUT Deluxe Threading Kit
= Replacement Part
= Accessory
Description
lb
70614
SUPER CUT Deluxe Threading Kit
21.0
439
INTERNATIONAL
= new product
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
70614
Set includes SUPER CUT Ratchet Handle (70840X), Quick Change die
heads NPT (1/2" 70912X, 3/4" 70913X, 1" 70914X), SUPER 1-1/4"
Steel pipe cutter (70040), Water Pump pliers 10" (70522), 14" Heavy
Duty Pipe Wrench (70153), Teflon tape, plastic case
CANADA
lb
USA
Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
Sets include ratchet handle, die heads, plastic case
MADE FOR THE TRADE!™
PORTABLE POWER THREADERS
SUPERTRONIC 1250 Portable Compact Threader
Plumbing
• Fast and steady production threading of up to NPT dia. 1-1/4”
• Electronic push-button forward/reverse control
• Compact dimensions and small head for use in hard to reach areas
• Lightweight, easy to handle
• Durable fiberglass-reinforced aluminum motor housing
• Motor: 34 rpm, 5 axle
Cat. No.
Description
lb
71453
65018
71279
70040
70753
SUPERTRONIC 1250, 1/2", 3/4", 1", 1-1/4” NPT
RONOL® Cutting Fluid, 6.7 oz (200 ml)
Forged Pipe Clamp, max. 1 1/4"
Steel Pipe Cutter, 1-1/4”
Bucket Oiler
9.4
0.8
3.5
2.5
20.0
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
• Quick and effortless production of safe precision threaded joints
to approved standards up to 2”
• Compact dimensions for use in difficult to reach positions
• Dust tight casing with sealed lubrication - Long lifespan,
low maintenance
• High reduction gears with spur wheel teeth; 7 parallel gear
shafts, each ball bearing mounted - High, consistent power
transmission level when fully loaded
• Optimized gearing - High performance output with minimal
energy consumption
• Motor: 1010 W Universal, double insulated with
VDE and CEE, interference free
• Threading Speed: 15-25 rpm, 60 rpm rapid reverse
Cat. No.
71259L
P71259C
71259L
SUPERTRONIC 2000 Set 1/2" - 2"
includes SUPERTRONIC 2000, forged pipe clamp (71280), ROFIX
Adapter (71271), Precision Die Heads, plastic case
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
SUPERTRONIC 2000
440
Inserting the die heads
Fits into tight spaces
Gearing
65018
71280
70045
70753
71273
71271
71259
Description
SUPERTRONIC 2000 Set, 1/2", 3/4", 1",
1 1/4", 1 1/2", 2" NPT
SUPERTRONIC 2000 Set for plastic-coated pipe,
1/2", 3/4", 1", 1 1/4", 1 1/2", 2" NPT
RONOL® Cutting Fluid 6.7 oz (200 ml)
Forged Pipe Clamp, max. 2”
Steel Pipe Cutter, 2”
Bucket Oiler
Monoblock adapter
ROFIX Adapter with locking ring
SUPERTRONIC 2000 machine only
lb
42.1
42.1
0.8
3.8
5.5
20.0
2.0
2.3
2.0
www.rothenberger-usa.com
ACCESSORIES FOR HAND AND POWER THREADERS
Precision Die Heads And Dies
Precision Die Heads
For Supertronic 1250, 2000, 2000 Ecomony and SUPER CUT
models. Feature enlarged shaving discharge chambers for faster
threading, strengthened locking plate and precise die seating.
FOR PLASTIC COATED PIPE, NPT
Cat. No.
SIZE
lb
70907X
70908X
70912X
70913X
70914X
70915X
70849X
70850X
–
–
P70912C
P70913C
970914C
P70915C
P70849C
P70850C
1/4"
3/8"
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
1.3
1.3
1.5
1.5
2.0
2.3
5.5
6.0
Cat. No.
Description
70916X
70917X
70918X
70919X
70920X
70921X
70945X
70946X
1/4" NPT
3/8" NPT
1/2" NPT
3/4" NPT
1" NPT
1 1/4" NPT
1 1/2" NPT
2" NPT
lb
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.4
Plumbing
Precision Threading Dies
Gentle first cut, extreme long life, 4 pieces/pack. Achieve
optimal results with Original ROTHENBERGER threading fluid!
NPT
Cat. No.
NOTE: Die Head and Dies for sizes 1/4” - 1 1/4” are compatible
with the RIDGID® 111-R Die Head.
441
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Accessory
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
= Replacement Part
USA
Tel: 800.435.0786
Fax: 800.451.2632
= new product
MADE FOR THE TRADE!™
POWER DRIVES
MINI-COLLINS®/Pneumatic MINI COLLINS® Power Drive
Plumbing
MINI-COLLINS®
Puts power back into power threading — thread up to 2" pipe or
conduit, 1" bolt or rod, in seconds!
00074
• Lightweight and engineered to go anywhere — requires only
1-3/4" clearance for working in trenches, overhead, and in
tight quarters where only hand tools could be used before
• Built-in fill plug eliminates disassembly of gearbox for oiling
• Tightens nuts, drives cable pullers, turns hoists and jacks,
opens and closes valves, or drives up to 6" geared threaders
• Shock-resistant handle and durable construction provide years
of safe, dependable operation
PNEUMATIC MINI-COLLINS®
ROTHENBERGER’s Pneumatic MINI-COLLINS weighs only 27
pounds and is the most portable air-powered threader available!
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
00078
442
• For complete safety in hazardous environments such as
petroleum and chemical plants, mines or tunnels
• Reversible, non-sparking air motor develops 500 foot-pounds
of torque in either direction
• Cannot be damaged by overload, even when operated to
point of stall
MINI-COLLINS® PNEUMATIC MINI-COLLINS®
Threading Range:
• Pipe or conduit
• Bolt or rod
• With adapters &
geared threader
1/8" to 2"
1/4" to 1"
1/8" to 2"
1/4" to 1"
2-1/2" to 6"
2-1/2" to 6"
Motor:
115V, 15 amp or
230V, 9 amp,
universal AC-DC
reversible,
50-60 Hz
Switches:
• On/Off
Deadman
Forward, reverse
• Directional
Dimensions:
• Overall length
• Cord length
28”
80”
Reversible air motor
develops 500 ft/lbs,
forward and reverse;
requires 90-120 PSI
(at 60-80 CFM) input
pressure
Safety lever throttle
(shuts off when released)
Forward, reverse
27”
–
Cat. No.
Description
lb
00074
00078
13950
00119
00077
13158
00110
00111
—
00116R
MINI-COLLINS® Drive, 115V
Pneumatic MINI-COLLINS® Drive
MINI-COLLINS® Drive, 230V
Steel carrying case
Safevise
Adapter SUPER CUT
Adapter Ridgid®* 00-R
Adapter Ridgid®* 111-R
Ridgid®* 12-R (No adaptor needed)
Adapter Square shaft 7/8"
Adapter Square shaft 1"
(for geared threader)
Adapter Square shaft 1-1/4"
27.0
29.0
27.0
5.0
5.0
3.0
3.5
3.0
00117
00118
13158
00077
3.0
4.5
3.0
00117
www.rothenberger-usa.com
COMPACT THREADING MACHINES
SUPERTRONIC 2SE/ROPOWER 50R
ROTHENBERGER’s portable 2” threading machines offer fast and steady,
precision threading, cutting, de-burring, and grooving. The powerful 750-watt
(1 HP) motor provides strong turning power with consistent torque for swift,
effortless production of accurate, standard pipe and bolt threads. The optional
foldable, wheeled workbench makes transport easy, whether on site or in
the workshop.
Check out this product
on YouTube! under
Rothenberger
Supertronic
SUPERTRONIC 2SE
The SUPERTRONIC 2SE uses quick-change dies with a ball-detent feature
that makes aligning replacement dies in the die head fast and easy. The
2SE die head and dies are compatible with the SUPERTRONIC 4SE threading
machine.
63004
97.0
56051
56511
04510R
97.0
70.0
4.0
0.5
2se die head & die selection chart
50R die head & RIDGID® Compatible die selection chart
die head type die head size NO.
Automatic
1/2" - 2"
56265
Manual
1/4" - 3/8"
00121
= new product
= Replacement Part
= Accessory
NPT DIE SIZE ALLoY NO. High speed steel no.
1/2" - 3/4"
89162
00125
1" - 2"
89163
00126
1/4" - 3/8"
56383
stainless steel
00218
00219
443
INTERNATIONAL
NPT DIE SIZE ALLoY NO.
1/2" - 3/4"
89101
1" - 2"
89102
1/4" - 3/8"
89100
1/2" - 3/4"
89101
1" - 2"
89102
Tel: +1.815.397.7070
Fax: +1.815.397.9247
die head type die head size
NO.
Automatic
1/2" - 2"
52500
Manual
1/4" - 3/8"
00121
1/2" - 2"
20162
CANADA
63005
Supertronic 2SE with automatic die head 1/2" - 2",
1/2” - 3/4” NPT dies (89101), 1” - 2” NPT dies (89102)
ROPOWER 50R with automatic die head with NPT Alloy dies
1/2"-2", 1/2” - 3/4” NPT dies (89162), 1” - 2” NPT dies (89163)
Wheeled folding stand
Mounting kit for RoGROOVer
Cutter Wheel
USA
lb
Tel: 800.435.0786
Fax: 800.524.2853
Automatic die head with quick
adjustment of thread size, thread
lengths and fine thread depths
without recentering.
Cat. No. Description
Tel: 800.435.0786
Fax: 800.451.2632
• Motor is double insulated for increased safety
• Stable high torque motor provides constant power
• Offset spindle lubrication: Easy to maintain
• Geared oil pump with filter system and adjustable fluid level ensures constant oil flow
• Large plastic chip collection tray is easy to clean
• Machine slightly angled: Reduced oil consumption, oil moistening in pipe
interior is avoided
• NPT dia.: 1/4"-2" capacity
• Motor Strength: 750 watts (1 HP)
• Speed: 40 rpm (No load)
• Dimensions: 21"x17"x13" (L x W x H)
Plumbing
ROPOWER 50R
The ROPOWER 50R uses RIDGID®*-compatible dies with the new quickchange ball detent feature. While other manufacturers’ RIDGID®* style dies
may be used in the 50R die head (56265), only ROTHENBERGER’s dies snap
into position.
MADE FOR THE TRADE!™
SUPERTRONIC 4SE 1/2” to 4” Threading Machine
Plumbing
ROTHENBERGER’s SUPERTRONIC 4SE offers fast and steady threading,
cutting and de-burring up to 4 inches. The powerful, 2-speed, 1-1/2 HP.
motor provides strong turning power with consistent torque for swift,
consistent production of accurate pipe threads either on site or in the shop.
The machine includes 2 automatic die heads, 3 sets of dies, safety foot
switch, oil, and set of 4 legs.
• Easy access to all components for quick repair
• Ball detent feature allows quick and easy replacement of dies without
removing the die head
• Smooth action impact hammer chuck: Powerful, no-slip grip
• Chuck jaws are quick and easy to change
• Robust oil pump with flow adjustment and filter system:
Keeps oil free of impurities
• Motor: 1140 watts (1 1/2 HP), Universal Single Phase, 115 Volt
• Threading Speed: 48/18 rpm (2 speed)
• Dimensions: 31"x21"x19" (L x W x H)
• Machine Capacity: Pipe 1/2"-4"; Bolt 3/8"-2"
INTERNATIONAL
63006
52500
64350
89101
89102
59912
Supertronic 4SE 1/2" - 4" NPT
Automatic die head 1/2” - 2”
Automatic die head 2 1/2"-4"
Alloy die set 1/2"-3/4" NPT
Alloy die set 1” - 2” NPT
Alloy die set for Die Head 64350 only
2 1/2"-4" NPT
Rocool Thread Cutting Oil 1 gallon
Superjack Pipe Stand for 1/2" - 8" pipe
Rogroover Mounting Kit for 4SE
Cutter wheel
Enclosed, wheeled cabinet
Open wheeled stand (with tool tray)
232.0
18.0
18.0
2.0
2.0
3.0
01922R
10640
56512
04510R
E-239
00548A
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
lb
Tel: 800.435.0786
Fax: 800.451.2632
USA
Description
Tel: +1.815.397.7070
Fax: +1.815.397.9247
E-239
Cat. No.
444
*RiDgid is a registered trademark of Ridge Tool Co.
8.0
25.0
9.0
0.5
165.0
56.0
www.rothenberger-usa.com
COLLINS® Classic 22A
This top-of-the-range threading machine is suitable for the most
demanding pipework applications, on-site threading, prefabrication work,
or even production applications. Completely versatile – handles even
difficult make-on or breakdown of fittings. High performance output in
every way, the result from over 40 years producing the tried and tested
Collins® pipe threaders.
Standard Supply: Threading machine (00579) with built-in pipe cutter
and reamer, foot-operated safety switch, 2 snap-o-matic die heads
(00063,00066), 2 sets of HHS dies (00028, 00031), 1 gallon oil (01922).
Cat. No.
Description
445
INTERNATIONAL
= Accessory
2.0
CANADA
= Replacement Part
2.0
USA
= new product
240.0
240.0
240.0
240.0
240.0
240.0
220.0
5.5
5.5
6.0
0.3
1.0
11.0
4.0
54.0
165.0
5.0
7.0
10.0
0.3
Tel: +1.815.397.7070
Fax: +1.815.397.9247
00031
240.0
Tel: 800.435.0786
Fax: 800.524.2853
00579
00587
00592
00596
00597
00575A
00575R
00585
01623
20533
00160
00157
00158
00159
00155
00045
E-239
00154
45001
01297
1221-H
00028
lb
Tel: 800.435.0786
Fax: 800.451.2632
COLLINS Classic 22A with
Snap-O-Matic® die head & dies, 72 rpm, 115V
Snap-O-Matic® die head & dies, 100 rpm, 115V
Snap-O-Matic® die head & dies, 230V
UNIQUAD® die head & dies, 72 rpm, 115V
Automatic die head & dies, 72 rpm, 115V
Automatic ball-detent die head & Dies
RIDGID® compatible automatic head & dies
Basic 22A unit without die head/dies
Replacement jaws (set 8)
Low indent jaws for plastic-coated pipe (set 8)
Reamer, 1/8” - 2” conical, 5-blade
Spare cutter wheel (1)
Spare cutter wheel (6)
Cutter assembly, wheel type
Oil sump baffle
Open wheel stand with tool tray
Threader storage cabinet with wheels
Waterproof cover
Mounting Kit for ROGROOVER
Switch Assembly
Switch Handle
Dies, Automatic, Snap-O-Matic®, UNIQUAD®
1/2” - 3/4” NPT Set
Dies, Automatic, Snap-O-Matic®, UNIQUAD®
1” - 2” NPT Set
®
Plumbing
• Motor: Heavy-duty, 115V, universal AC/DC, 50/60 Hz.
Develops up to 2.3/4 HP
• Left and Right hand optional
• 84db on A scale noise level
• Dual guide precision pipe cutter; 5-blade conical reamer
• 72 rpm No-Load spindle; Optional 54 and 100 rpm
• Collins® SUPER GRIP chucking system with 4 heavy duty jaws at
both front and rear
• Long-life HSS precision dies
• Automatic oil feed for optimal lubrication and cooling of dies
• Threading range: Pipe or Conduit 1/8" to 2", Bolt or Rod 1/4" to 2-1/4"
• Safety foot switch
• Optional Open Wheel Stand with tool tray and Closed Wheel Stand
with locking tool cabinet
MADE FOR THE TRADE!™
RHINO® 1/2" to 4" Heavy Duty Threading Machine
Plumbing
• Motor: Heavy Duty, 115 V, AC/DC 50/60 Hz. Develops up to 3 HP
• High speed threading — 25 rpm
• 85db max. noise level
• Collins® SUPER GRIP chucking system with 4 heavy duty jaws at both
front and rear.
• Automatic die heads 2 1/2" to 4"
• Automatically adjusted thread length
• “Quick Shot” lubricating system
• 2-gallon oil reservoir
• Threading range with optional package: Pipe or conduit 1/2"
to 4", Bolt or rod 5/8" to 2 1/4"
• Standard Supply: threading machine with built-in pipe cutter, reamer, foot
operated safety switch, 2 1/2”- 4” die heads & dies
Top-quality threading machine for standard use by plumbing
and electrical contractors.
Cat. No.
Description
lb
00550
RHINO® Threading Machine with
2 1/2" - 4" automatic die heads
RHINO® Threading Machine with 2 1/2" - 4" automatic die
heads & dies for plastic-coated pipe
RHINO® optional 1/2" - 2" package with 1/2" - 2" automatic
die heads and dies with 1/2" - 2" conical reamer
Reamer 1/8" to 2" conical, 5-blade
reamer assembly
1/8" to 2" reamer cone only
2 1/2" - 4" twin-edged blade
2 1/2" - 4" reamer assembly
Cutter assembly
Spare cutter wheel, 1 pack
Spare cutter wheel, 3 pack
Open wheel stand (with tool tray)
Threader storage cabinet with wheels
Mounting kit for Rogroover
340.0
P00551C
00561
00097
446
INTERNATIONAL
CANADA
27.0
5.5
5.5
5.0
5.0
40.0
1.0
1.0
56.0
165.0
14.0
Nipple Chucks
Check out this product
on YouTube!
under Rothenberger
Nipple Chucks
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
01894
00107
00551
00106
00104
00105
00548R
E-239
45004
340.0
1/2” - 2”
Nipple chucks convert unthreaded or short pipe lengths into useful
close-threaded nipples. Faster and more economical to use than nipple
chuck adapter systems
2-1/2” to 4” and 5” to 6”
Patented mechanism expands and self-locks pipe from inside for work on
short pipe lengths. 5” to 6” nipple chuck assembly can be used on both conduit and pipe (00073)
Cat. No. Description
00073
00088
00089
00190
00191
00192
00193
00194
00195
00199
00089
01850
00073
For use with PANTHER, 1SE, 2SE, 50R, 4SE:
NIPPLE MAX Set, 1/2" - 2"
For use with RHINO®, 22A, 33A, 44A, 66A:
Nipple Chuck, 1/2”
Nipple Chuck, 3/4”
Nipple Chuck, 1”
Nipple Chuck, 1-1/4”
Nipple Chuck, 1-1/2”
Nipple Chuck, 2”
External Nipple Chuck, 1/2” - 2” Sch. 80 pipe
NIPPLE MAX Set, 1/2” - 2”, extension bar
NIPPLE MAX Set, 1/2” - 2”
For use with all Collins machines:
Nipple Chuck Assembly for 5”- 6”
lb
16.0
20.0
0.9
1.2
1.6
2.2
2.6
4.3
16.0
15.0
50.0
www.rothenberger-usa.com
THREADING ACCESSORIES
RONOL® and RONOL SYN®
RONOL® High-performance cutting oil
• Mineral oil basis For threading of all materials, including stainless steel.
Mineral-based threading oils may not be permissible in drinking water
installations – Please check the pertinent standards in your area.
RONOL® SYN High-performance cutting fluid
• No mineral oils, purely synthetic. Developed and approved for drinking
water and plumbing installations.
65008
65013
Cat. No. Description
65018
65008
65013
RONOL Spray 6.8 oz (200 ml)
RONOL® Spray Can 20.3 oz (600 ml)
RONOL® SYN Spray Can 20.3 oz (600 ml)
®
lb
0.6
1.7
1.7
Plumbing
ROCOOL® Cutting Oil
Special blend of sulfo-chlorinated mineral oil assures long die life
and superior quality threads. ROCOOL® cutting oil and automatic
through-the-die-head oil flow makes it impossible to cut a dry thread.
Cat. No.
Description
lb
01922R
00001
00002
00003
70753
ROCOOL Cutting Oil (1 gallon)
ROCOOL® Cutting Oil (six 1 gallon containers)
ROCOOL® Cutting Oil (5 gallons)
ROCOOL® Cutting Oil (55 gallons)
Bucket Oiler
8.0
48.0
40.0
480.0
20.0
®
Tel: 800.435.0786
Fax: 800.524.2853
= Replacement Part
= Accessory
447
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
70753
USA
Tel: 800.435.0786
Fax: 800.451.2632
00002
01922
MADE FOR THE TRADE!™
VISES AND STANDS
Tri-Bench with 6" Chain Vise
Plumbing
• Collapsible, stable frame: Compact size
• Holes and slots: For attaching various tools
• With recesses: For bending tubes 3/8", 1/2", 3/4" O.D.
• Ceiling brace for overhead support of the stand: Secure frame
even during difficult work
Cat. No.
Description
lb
70752
Tri-Bench with Chain Vise (1/8" - 6")
68.0
Top Screw Cam Lock Vise
Tough, powerful, bending device and tube support, forged and hardened,
wear-resistant jaws, powerful chain
• V-shaped support: Prevents bending during clamping
• Universal vice attachment
• Interchangeable jaws: works with Ridgid® 460 model
• Offset lever and pre-tensioning screw: Quick fastening
Cat. No.
Description
lb
70716
Vise (1/8" - 6" O.D.)
20.5
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
SUPERJACK Pipe Stands
10640
Supports full lengths of pipe, 1/2"-8", when using pipe
threading machines
10641
• Height capacity: 27"-50"
• Weight capacity: 2,500 lb. max
• Folding stand includes carrying handle
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
Tel: 800.435.0786
Fax: 800.524.2853
Ball Transfer Head
448
Cat. No. Description
lb
10640
00101
10641
10642
00100
25.0
29.0
26.0
30.0
2.45
SUPERJACK with V-Head
SUPERJACK with Ball Transfer Head
Folding SUPERJACK with V-Head
Folding SUPERJACK with Ball Transfer Head
(1) Set of Ball Transfer Head
Bench Yoke Vise
Foldable, with automatic closing hook, milled and hardened upper and lower
support jaw, powerful smooth-running spindle.
Cat. No.
Description
lb
70711
Bench Yoke Vise (1/8" - 4" O.D.)
25.0
www.rothenberger-usa.com
PRODUCTION CUTTING MACHINES
COLLINS® E-Z Cutter®
• Universal AC/DC motor provides a full 1/2 HP for all-day production needs
• Gear-driven rollers turn the work for true perpendicular cutting
• Ball-bearing assembled cutter wheel revolves freely for even wear
• High-speed tool-steel cutter wheels provide thousands of cuts with no
external burr — so clean that no further finishing is needed before
applying fittings
• Foot switch provides operator safety while freeing both hands for highvolume production demands
• Drive Type: Gear-driven rollers
• Motor: 2-3/4 HP Universal AC/DC, 50-60 Hz; Optional 230V motor
• Dimensions: 19” x 10” x 19” (L x W x H)
FOR FLOOR MOUNTING:
• E-Z CUTTER® Stand #00037 bolts to the floor for stationary support
• Pipe Support fitting #00071 (with 1" pipe legs) mounts onto 1 1/4" pipe
also using the Roller Bearing Support on support pipe
• SUPERJACK Pipe Stand with Ball Transfer Head #00101 replaces
complicated system of support pipe and fittings.
Cat. No. Description
= Replacement Part
= Accessory
449
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
CANADA
1.0
1.0
1.0
3.0
40.0
3.0
1.0
8.0
8.0
USA
All models include a heavy-duty footswitch and one pipe cutter wheel.
C versions include two heavy-duty rollers and two stationary supports.
121.0
121.0
125.0
125.0
1.0
Tel: 800.435.0786
Fax: 800.524.2853
This high-volume, production cutter makes quick work of
1/4"- 4" pipe and 5/8"- 4 1/2" tubing. The lightweight
E-Z Cutter® is built to withstand everyday use.
00035R
00535
00536
00036R
00037
00069
00071
00079
02350
E-Z CUTTER Model A, 115V
E-Z CUTTER® Model A, 230V
E-Z CUTTER® Model C, 115V
E-Z CUTTER® Model C, 230V
Steel pipe cutter wheel for galvanized, black, and
stainless steel
Copper tube cutter wheel
Soil pipe cutter wheel
Plastic pipe cutter wheel
Stationary support
E-Z CUTTER® Stand
Roller bearing support
Pipe support fitting
Foot switch, 115V
Foot switch, 230V
lb
Tel: 800.435.0786
Fax: 800.451.2632
00032
00533
00033
00534
00034R
®
Plumbing
FOR BENCH MOUNTING:
• Stationary Support #00036 mounts your 1 1/4" support pipe to the
workbench surface
• Roller Bearing Support #00069 slides onto the support pipe and provides
easy travel and rotation of work.
MADE FOR THE TRADE!™
PRESS TOOLS
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Plumbing
ROPRESS Compact
450
The ROPRESS Compact lightweight, battery-powered press tool weighs only
3.7 lbs. and connects 1/2”, 3/4” and 1” copper tubing or 3/8”–1-1/4” PEX
tubing in about 6 seconds. A slim profile allows for one hand operation of the
tool while the other hand is free to hold and position the fitting. Its straight
design is like an extension of your arm that easily reaches into tight spaces.
When a press is complete, the jaws automatically release signaling that the
tool is ready for the next press.
• Interchangeable crimping jaws: Flexible and cost effective
• Jaw fixture rotates 350º and easily fits into tight spaces
• Secure grips and innovative 2-component housing allows
easy 1-handed operation
• Lightweight and compact: Easy access in hard-to-reach areas. Ergonomic
design makes for effortless crimping
• LED display shows tool information
• Illumination for safety when working
• Hydraulic jaw release button opens press jaws before crimp is completed,
if needed
• High-quality, powerful, long lasting Makita Li-ion battery
• Crimp Force: 5,400 lbs.
• Length: 18-1/4” (465 mm)
• Width (jaws open): 4-1/2” (108 mm)”
• Weight: 3.7 lbs. (1.68 kg)
• Battery: 9.6 Volt, 1.3 Ah
• Crimp cycle time: Approx. 6 seconds
• 12 Minute Quick Charge
Cat. No.
Description
lb
16001
16002
15031V
15032V
15033V
15930
15931
15932
15933
15934
15935
52176
52177
52178
14486
ROPRESS Compact Press Tool, No Jaws
ROPRESS Compact Press Tool, 1/2”-1” jaws, Battery, charger
Compact Press Jaw, 1/2” copper
Compact Press Jaw, 3/4” copper
Compact Press Jaw, 1” copper
Compact Press Jaw, 3/8” PEX
Compact Press Jaw, 1/2” PEX
Compact Press Jaw, 5/8” PEX
Compact Press Jaw, 3/4” PEX
Compact Press Jaw, 1” PEX
Compact Press Jaw, 1-1/4” PEX
18V Lithium Battery, 3 amp
18V Lithium Battery, 1.5 amp
18V Lithium Battery, Charger, 120V
GO/NO GO Calibration Gauge
3/8”, 1/2”, 5/8”, 3/4” ASTM F1807 PEX
GO/NO GO Calibration Gauge
3/8”, 1/2”, 3/4”, 1” ASTM F1807 PEX
3.7
16.0
4.4
4.4
4.4
4.4
4.4
4.4
4.4
4.4
5.4
1.5
1.5
1.5
1.0
14487
1.0
www.rothenberger-usa.com
ROPRESS Cordless
State-of-the-art crimping tool.
The ROPRESS Cordless combines the simplicity of joining copper pipes
without soldering and brazing, with the ease, features, and portability of
battery power.
Description
lb
16101
16102
15222X
15223X
15224X
15225X
15226X
15227X
15251X
15252X
15253X
15254X
15255X
15256X
52176
52177
52178
14486
ROPRESS Cordless Tool, No Jaws
ROPRESS Cordless Tool, 1/2” - 2” jaws, Battery, charger
Press Jaw, 1/2” copper
Press Jaw, 3/4” copper
Press Jaw, 1” copper
Press Jaw, 1-1/4” copper
Press Jaw, 1-1/2” copper
Press Jaw, 2” copper
Press Jaw, 3/8” PEX
Press Jaw, 1/2” PEX
Press Jaw, 5/8” PEX
Press Jaw, 3/4” PEX
Press Jaw, 1” PEX
Press Jaw, 1-1/4” PEX
18V Lithium Battery, 3 amp
18V Lithium Battery, 1.5 amp
18V Lithium Battery, Charger, 120V
GO/NO GO Calibration Gauge
3/8”, 1/2”, 5/8”, 3/4” ASTM F1807 PEX
GO/NO GO Calibration Gauge
3/8”, 1/2”, 3/4”, 1” ASTM F1807 PEX
18.8
22.8
4.4
4.4
4.4
4.4
4.4
4.4
4.4
4.4
4.4
4.4
4.4
5.4
1.5
1.5
1.5
1.0
14487
Plumbing
• Interchangeable crimping jaws: Flexible and cost effective
• Secure grips and innovative 2-component housing allows
easy 1-handed operation
• LED display shows tool information
• Illumination for safety when working
• High-quality, powerful, long lasting Makita Li-ion battery
• Effortless crimping: Lightweight Pistol Design
• Linear Sheaer Force: Aprrox. 32kN
• Crimping per battery charge: Approx. 300 (at NS20)
• Battery: Makita 3.0 Ah Li-Ion
• Battery Charge Time: 22 minutes
Cat. No.
1.0
ROPRESS Corded
16.6
20.6
4.4
4.4
4.4
4.4
4.4
4.4
4.4
4.4
4.4
4.4
4.4
5.4
1.0
14487
1.0
451
INTERNATIONAL
ROPRESS Corded Tool, No Jaws
ROPRESS Corded Tool, 1/2” - 2” jaws, Battery, charger
Press Jaw, 1/2” copper
Press Jaw, 3/4” copper
Press Jaw, 1” copper
Press Jaw, 1-1/4” copper
Press Jaw, 1-1/2” copper
Press Jaw, 2” copper
Press Jaw, 3/8” PEX
Press Jaw, 1/2” PEX
Press Jaw, 5/8” PEX
Press Jaw, 3/4” PEX
Press Jaw, 1” PEX
Press Jaw, 1-1/4” PEX
GO/NO GO Calibration Gauge
3/8”, 1/2”, 5/8”, 3/4” ASTM F1807 PEX
GO/NO GO Calibration Gauge
3/8”, 1/2”, 3/4”, 1” ASTM F1807 PEX
CANADA
= Accessory
16201
16202
15222X
15223X
15224X
15225X
15226X
15227X
15251X
15252X
15253X
15254X
15255X
15256X
14486
USA
= Replacement Part
lb
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
Description
Tel: 800.435.0786
Fax: 800.524.2853
• Interchangeable crimping jaws: Flexible and cost effective
• Secure grips and innovative 2-component housing allows
easy 1-handed operation
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
State-of-the-art crimping tool.
The ROPRESS Cordless combines the simplicity of joining copper pipes
without soldering and brazing, with the ease, features, and portability of
battery power.
MADE FOR THE TRADE!™
Press Jaws
Plumbing
ROTHENBERGER press clamps are suitable for all press tools with a
compatible press jaw fixture and a constant axial shearing force of
32 to 34 kN.
NOTE: Press jaws are subject to wear like all tools and should be examined
periodically for damage. In order to ensure proper functionality of the
jaws, we recommend regular maintenance at the time of annual press tool
inspection, or every 10,000 crimps. If damage is evident, the press jaw
should not be used until it can be sent to your nearest authorized press tool
service center for inspection and any necessary repairs.
Cat. No. Description
15222X
15223X
15224X
15225X
15226X
15227X
15251X
15252X
15253X
15254X
15255X
15256X
15013V
Press Jaw, 1/2" copper
Press Jaw, 3/4" copper
Press Jaw, 1" copper
Press Jaw, 1 1/4" copper
Press Jaw, 1 1/2" copper
Press Jaw, 2" copper
Press Jaw, 3/8" PEX
Press Jaw, 1/2" PEX
Press Jaw, 5/8" PEX
Press Jaw, 3/4" PEX
Press Jaw, 1" PEX
Press Jaw, 1 1/4" PEX
Case for ROPRESS jaws only - holds 6
lb
4.4
4.4
4.4
5.8
7.4
10.0
4.4
4.4
4.4
4.4
4.4
5.8
4.4
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
15031
452
Press Rings
ROTHENBERGER Press Rings with proven material and manufacturing quality.
Suitable for confined spaces through the catch adjustment.
Cat. No. Description
lb
93667
93677
93682
93687
93692
28.0
6.0
7.0
7.0
5.0
Press Ring Set (2-1/2”, 3”, 4” rings), actuator, case
Press Ring XL 2-1/2”
Press Ring XL 3”
Press Ring XL 4”
Press Ring Acutator
www.rothenberger-usa.com
PEX Hand Crimper
Constructed of hardened steel for durability with an Ultra-Lite fiberglass
reinforced composite handle, Rothenberger Pex Crimpers are ideal for
making copper crimp ring connections in potable water and radiant heating
applications.
• Crimps meet ASTM F1807 Specificiations.
• Each tool is supplied with a go/no-go gauge.
• Crimp Cavity does not skive the copper ring or cause it to fishtail during
crimping process.
• Glass-filled composite handles reduce fatigue especially when
working overhead.
• Properly maintained crimpers are expected to make over 100,000 crimps
in their life cycle.
• Minimal Calibration Adjustments.
Cat. No. Description
1” PEX Crimper
1/2” & 3/4” PEX Crimper Combo
Go/No-Go Gauge, for 3/8”, 1/2”, 5/8”, 3/4” crimps
Go/No-Go Gauge, for 3/8”, 1/2”, 3/4”, 1” crimps
4.0
3.3
1.0
1.0
PEX Medium Handle Crimper
Time-tested by the professional plumbing contractor, this medium handle
crimper is considered the standard of the industry. Its crimp eliminates the
unsightly appearance of tool marks and distortion of crimped rings.
Effortless crimping action as loads are dramatically reduced with this
innovative design. The longer length on this tool promotes productivity and
minimizes user fatigue.
lb
12431
4.0
1” PEX Crimper, 16” Handle
lb
12430
1.3
PEX Ring Removal Tool
= new product
= Replacement Part
= Accessory
Cat. No. Description
lb
12429
1.0
PEX Stainless Clamp Pincer Ratchet Tool
Tel: +1.815.397.7070
Fax: +1.815.397.9247
• Only one tool is required for 3/8”, 1/2”, 3/4” or 1” Clamps.
• Ratchet mechanism assures complete crimps.
• A tool calibration gage is provided to verify the tool is in adjustment.
• Made in the USA from heat treated steel which provides durability
and longevity.
• Tool length is 11”.
453
INTERNATIONAL
Clamp Pincer Ratchet Tools
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No. Description
CANADA
• Suitable for use on 1/2”, 5/8”, 3/4” and 1” Pex Pipe Sizes.
• Cutting blade only pentrates the ring and Pex pipe. No fitting damage is
possible with this tool.
• Two cuts on the ring allow the user to reclaim the fitting.
• Cushioned grips create comfort.
• Replacement blades readily available.
Tel: 800.435.0786
Fax: 800.451.2632
Ring Removal Tool
USA
Cat. No. Description
Plumbing
12427
12428
14486
14487
Go/No-Go Gauge
lb
MADE FOR THE TRADE!™
PLIERS & PIPE WRENCHES
Plumbing
ROGRIP® Self-Adjusting Multi-Purpose Pliers
For use on various forms of material. With a perfect grip and improved
leverage, the ROGRIP® offers many advantages over conventional pliers.
Made of drop forged chrome vanadium steel.
• High quality Duramant® surface coating
• Double hardened teeth
• Improved leverage compared to conventional pliers
• Automatic fit on various forms of material up to 1-5/8” (42 mm) dia.
Grips hexagonal shapes
Grips pipes
Grips sheets
Grips fittings
Cat. No. Description
70558
ROGRIP 10"
®
lb
1.0
ROLOCK®
A professional-grade water pump pliers with jaw locking system, provides a
secure grip on round, square or hex-shaped items with the push of a button.
Cat. No. Description
lb
ROLOCK 7”
ROLOCK® 9"
ROLOCK® 12"
0.5
0.8
1.0
70531
70532
70533
®
Water Pump Pliers
• Adjustable for 7 sizes, stable, tough
• Induction hardened teeth with high wear resistance
• Crush & clamp guard
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Complies with DIN 5231 D, with heavy duty box joint, chrome vanadium steel,
drop forged, tempered, polished head and joint.
454
Cat. No.
Description
lb
70521
70522
70523
70522D
7" (Max. O.D. 1")
10" (Max. O.D. 1 1/4")
12" (Max. O.D. 1 1/2")
10" Counter Display (12 pieces)
0.5
0.8
1.1
10.0
Heavy Duty Pipe Wrench
Monoblock cast body with high strength, double T profile, forged jaw and
hook, fine-polished teeth set against turning direction, induction hardened,
tempered, and anti-slip adjustment screw. Complies with US standard
GGG-W-651 Type I Class A.
• Spring-supported hook: One-handed ratchet-like use, self-clamping
• Quick preset of tube diameter using scale on hook
Cat. No. Description
lb
70150
70151
70152
70153
70154
70155
70156
70157
1.0
2.0
3.5
4.5
6.5
10.5
20.0
37.0
8" (Max. O.D. 1")
10" (Max. O.D. 1 1/2")
12" (Max. O.D. 2")
14" (Max. O.D. 2")
18" (Max. O.D. 2 1/2")
24" (Max. O.D. 3")
36" (Max. O.D. 5")
48" (Max. O.D. 6")
www.rothenberger-usa.com
Aluminum Pipe Wrench
Features similar to HEAVY DUTY
Complies with US standard GGG-W-651 Type I Class B
• Extremely light aluminum alloy with high strength:
Approx. 40% lighter than steel
• ALUMINUM Pipe Wrench for PVC Coated Conduit has specially designed
jaws for gripping coated pipe. Protects plastic coating
Cat. No.
Description
70159
70160
70161
70162
70163
70164
10" (Max. O.D. 1 1/2")
14" (Max. O.D. 2")
18" (Max. O.D. 2 1/2")
24" (Max. O.D. 3")
36" (Max. O.D. 5")
48" (Max. O.D. 6")
P70159C
10" Aluminum Pipe Wrench for PVC Coated Conduit
(Max. O.D. 1 1/2")
14" Aluminum Pipe Wrench for PVC Coated Conduit
(Max. O.D. 2")
18" Aluminum Pipe Wrench for PVC Coated Conduit
(Max. O.D. 2 1/2")
24" Aluminum Pipe Wrench for PVC Coated Conduit
(Max. O.D. 3")
lb
CONDUIT
2.0
3.0
4.0
6.0
11.5
20.0
FOR PVC COATED CONDUIT
P70161C
P70162C
3.0
4.0
6.0
Heavy Duty End Pipe Wrench
Plumbing
P70160C
2.0
Features similar to HEAVY DUTY
Complies with US standard GGG-W-651 Type IV
• Offset wrench head: Ideal for work in confined spaces or close to walls
lb
70166
70167
10" (Max. O.D. 1 1/2")
14" (Max. O.D. 2")
1.7
3.2
Aluminum Offset Pipe Wrench
Complies with US standard GGG-W-651 Type I Class B
Description
lb
70115
70116
14" (Max. O.D. 2")
18" (Max. O.D. 2 1/2")
3.0
4.0
• Double-sided teeth surface set against the turning direction:
Works in both directions without re-inserting
= new product
= Replacement Part
= Accessory
Cat. No.
Description
lb
70235
12" (Max. O.D. 4")
2.0
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Profile handle made of drop forged, chrome vanadium steel, polished head
and powerful chain made of tempered special steel.
455
INTERNATIONAL
Chain Pipe Wrench 4"
CANADA
Cat. No.
Tel: 800.435.0786
Fax: 800.524.2853
• Extremely light aluminum alloy with high strength:
Approx. 40% lighter than steel
• Offset wrench head: Ideal for work in confined spaces or close to walls
USA
Description
Tel: 800.435.0786
Fax: 800.451.2632
Cat. No.
MADE FOR THE TRADE!™
Heavy Duty Chain Pipe Wrench
Very tough design for the most demanding applications, tried and tested in
pipeline construction. Forged jaws and handle; replaceable jaws.
• Strong chain made of tempered steel: Fits every cross-section
• Double-sided tooth system for ratchet-like use: For right and
left-handed motion
Plumbing
Cat. No. Description
70243
70244
70245
70246
70247
27" (Max. O.D. 2 1/2")
37" (Max. O.D. 4")
44" (Max. O.D. 6")
50" (Max. O.D. 8")
63" (Max. O.D. 12")
lb
6.0
12.0
25.0
33.0
62.0
TUBE CUTTERS
35 PRO / 42 PRO Tube Cutter
Cuts tubes made of:
• copper, brass, aluminum, thin-walled steel
• PE, PP, PVDF, plastic-coated tubes
• stainless steel
Cat. No.
Description
lb
70027
70029
70017B
70017D
21652B
21652
70041
PRO 35 (O.D. 1/4" - 1 3/8")
PRO 42 (O.D. 1/4" - 1 5/8")
Cutter Wheel, 2 pack
Cutter Wheel, 5 pack
Deburring Blades, 10 pack
Deburring Blades, 1 pack
Axle and screw
1.0
1.2
0.3
0.3
0.3
0.1
0.1
Tube cutter for copper tubes. Ergonomic design of body and knob
with seating surface for the hand during turning.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
MINICUT 2000
456
• Large knurled knob, handy design: Fatigue-free pressure control
• Two guide rollers with recess: Cuts close to flares
• Handy design with small working radius of 1-3/4" (45 mm): Ideal for hard
to reach places
Cat. No. Description
lb
70105
70017B
70017D
70041
0.4
0.3
0.6
0.1
MINICUT 2000 (O.D. 1/8" - 7/8")
Cutter Wheel, 2 pack
Cutter Wheel, 5 pack
Axle and screw
MINI MAX
Tube cutter for copper tubes. Ergonomic design of body and knob
with seating surface for the hand during turning.
• Large knurled knob, handy design: Fatigue-free pressure control
• Two guide rollers with recess: Cuts close to flares
• Handy design with small working radius of 1-3/4" (45 mm): Ideal for hard
to reach places
Cat. No.
Description
lb
70015
70017B
70017D
70041
MINI MAX (O.D. 1/8" - 1 1/8")
Cutter Wheel, 2 pack
Cutter Wheel, 5 pack
Axle and screw
0.8
0.3
0.6
0.1
www.rothenberger-usa.com
Tube Cutter 30 / Tube Cutter 50
Tube cutter for copper tubes.
• Retractable internal deburrer and spare cutter wheel in handle: Always
within reach
• Two guide rollers with recess: For cuts close to flares
71019
Automatic Tube Cutter
Cat. No.
Description
lb
71019
70065
70017B
70017D
70056D
70041
Tube Cutter 30 (O.D. 1/8" - 1 1/8")
Tube Cutter 50 (O.D. 1/2" - 2")
Cutter Wheel, 2 pack
Cutter Wheel, 5 pack
Stainless Steel Cutter Wheel, 5 pack
Axle and screw
0.7
0.8
0.3
0.6
0.6
0.1
Ratchet telescopic cutter for copper, brass, aluminum, thin-walled steel, and
plastic coated tubes.
Cat. No.
Description
lb
70030
70017B
70017D
70142
70143
70057D
21652B
50049
Automatic size 1 (O.D. 1/8" - 2 5/8")
Cutter Wheel, 2 pack
Size 1 Cutter Wheel, 5 pack
Automatic size 2 (O.D. 2" - 5")
Automatic size 3 (O.D. 4" - 6 5/8")
Spare cutter wheel sizes 2/3, 2 pack
Spare deburring blade sizes 1/2/3, 10 pack
Axle and screw
2.0
0.3
0.3
3.5
4.0
0.1
0.3
0.1
Plumbing
• Ratchet telescopic guide with automatic spring-driven withdrawal: Quick
adjustment, fast opening
• Retractable internal deburring tool and spare cutter wheel in handle:
Always within reach
lb
88807
88810
88808
88802
88814
88806
88803
Pipeslice 1 (Nominal dia. 3/8"; O.D. 1/2")
Pipeslice 2 (Nominal dia. 1/2"; O.D. 5/8")
Pipeslice 3 (Nominal dia. 5/8"; O.D. 3/4")
Pipeslice 4 (Nominal dia. 3/4"; O.D. 7/8")
Pipeslice 5 (Nominal dia. 1"; O.D. 1 1/8")
Spare cutter wheel for 1/2/3
Spare cutter wheel for 4/5
0.6
0.6
0.6
0.6
1.0
0.1
0.1
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= new product
= Replacement Part
= Accessory
457
INTERNATIONAL
Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
CANADA
• Cut tubes with less turns
• Self-clamping and self-alignment: No re-adjustment necessary
• Less space required: Ideal for hard to reach places
• Cast aluminum casing
Tel: 800.435.0786
Fax: 800.451.2632
Cutting copper tubing has never been easier! Simply snap the cutter onto
the tube and turn.
USA
PIPESLICE
MADE FOR THE TRADE!™
ROTRAC Tube Cutters
High precision tube cutter for copper tubes.
• Smooth-running telescopic action for consistent working radius,
blade advances faster
• ROTRAC Plus Cutters feature a large knurled knob
• Rolling stop protects cutter wheel
• Protected screw spindle prevents dirt ingress and jamming
• Cast aluminum design is compact and light
Plumbing
70010
70020
Cat. No.
Description
lb
70010
70011
70007B
70007X
70020
70021
70012
70013
70018
90007
ROTRAC 28 (O.D. 1/8" - 1 1/8")
ROTRAC 42 (O.D. 1/4" - 1 5/8")
Cutter Wheel, 2 pack
Cutter Wheel, 10 pack
ROTRAC 28 Plus (O.D. 1/8" - 1 1/8")
ROTRAC 42 Plus (O.D. 1/4" - 1 5/8")
ROTRAC 20PL for plastic pipe (O.D. 1/8" - 3/4")
ROTRAC 32PL for plastic pipe (O.D. 3/16" - 1 1/4")
ROTRAC 42 for flexible gas pipe (O.D. 1/4" - 1 5/8")
Cutter Wheel, stainless steel
1.0
1.0
0.3
0.1
1.0
1.0
1.0
1.0
1.0
0.1
ROTHENBERGER
Cutter Wheel Part No.
70007B 2-Pack
fits Rothenberger cutters
70010, 70011, 70020,
70021
70017B 2-Pack
fits Rothenberger cutters
70401, 70402, 70105,
70019, 70065, 70027,
70030
FITS CUTTERS FROM
Lenox®
RIDGID®
101, 118, 150, 151, 152,
153, 205
replaces #33185
10, 15, 20
replaces #33160
21010, 21011,
21012, 21012
replaces #21192, 21017
Ridgid® is a Registered Trademark of The Ridgid Tool Co. Lenox® is a Registered Trademark of NewellRubbermaid.
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Steel Pipe Cutters
458
• Hardened cutter wheel made of high alloy steel: Long service life
• Burr-free external cutting: Immediate thread cutting possible
• Optional cutter wheel for cast iron pipes
70040
70060
Cat. No.
Description
lb
70040
70046D
70045
70051D
70054
P70045C
70060
70061D
P70060C
1 1/4" Pipe Cutter (O.D. 1/8" - 1 1/4")
Cutter Wheel, 1 1/4", 3 pack
2" Pipe Cutter (O.D. 1/8" - 2")
Cutter Wheel, 2", 3 pack
Cutter Wheel for cast iron, 2"
2" Pipe Cutter for Plastic Coated Pipe (O.D. 1/8" - 2")
4" Pipe Cutter (O.D. 2" - 4")
Cutter Wheel, 4", 2 pack
4" Pipe Cutter for Plastic Coated Pipe
2.5
0.5
5.5
0.5
0.3
5.5
17.0
0.5
17.0
ROCUT® 26TC PEX Cutter
New direct cut action shear with a stainless steel blade for fast and accurate
cuts on PEX, PE, PP, and CPVC plastic pipe.
Cat. No.
Description
lb
52005
ROCUT 26TC (Max O.D. 1")
0.8
www.rothenberger-usa.com
Chain Tube Cutter
For copper, brass, aluminum, thin-walled steel tubes, & plastic coated tubes.
• Stable chain with 15 mini cutter wheels, two-step adjustment:
Ideal for working in confined spaces such as parallel-running tubes
• Chrome-plated with PVC handles
Cat. No.
Description
lb
70285
70286
MULTICUT 65 (O.D. 1" - 2")
Cutter Wheel Chain
1.3
0.4
ROCUT® 32TC PEX Cutter
New light and sturdy cutter for PEX, PE, PP, CPVC, and multi-layer pipe. Blade
is flat to “turn and cut.”
Cat. No.
Description
lb
52040
52041
ROCUT 32TC (Max O.D. 1 1/4")
Replacement Blade
1.6
0.3
52000
52010R
52000
52010R
52030
52015
52042
52011
52031
52016
80205
5685004
5687504
ROCUT 42TC (Max O.D. 1 5/8", Sch. 40 PVC 1 1/4”)
ROCUT® 50TC (Max O.D. 2" Sch. 40 PVC 1 1/2”)
ROCUT® 63TC Teflon Coated Blade (Max O.D. 2 1/2”, 40 PVC 2”)
ROCUT® 75TC (Max O.D. 3" Sch. 40 PVC 2 1/2”)
Replacement blade, 42TC
Replacement blade, 50TC
Replacement blade, 63TC
Replacement blade, 75TC
Replacement axle and nut
Replacement spring (42TC, 50TC, 63TC)
Replacement spring (75TC)
1.0
1.4
1.4
3.6
0.3
0.4
0.4
0.5
0.1
0.3
0.3
ROCUT® Economy Plastic Pipe Shears
= Replacement Part
= Accessory
Description
lb
55090E
55091E
55095E
50032
50042
50063
ROCUT 32 (Max O.D. 1 1/8", Sch. 40 PVC 1”)
ROCUT® 42 (Max O.D. 1 5/8" Sch. 40 PVC 1 1/4”)
ROCUT® 63 (Max O.D. 2 3/8” Sch. 40 PVC 2”)
Replacement blade, 32
Replacement blade, 42
Replacement blade, 63
1.2
1.6
3.5
0.5
0.8
1.5
®
459
INTERNATIONAL
= new product
Cat. No.
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Standard action cutters provide a fast, clean cut on most types
of plastic pipes.
CANADA
lb
®
Tel: 800.435.0786
Fax: 800.524.2853
Description
USA
52015
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
52030
For precise cutting of PVC, PP, PE, PEX, PB, and PVDF pipes.
• Double-sided blade and ratchet support: Precise force transfer and precise
guided cutter feed
• Stainless steel blade with V-edge: Pin-point precision without deformation
• Releasing lever: Automatic, controlled opening of the blade at the push of
a button
• Wide pipe support: Precise, right-angled cut
• Ideally meshed cutting curve: Minimum effort during cutting
• Safety lock
Plumbing
ROCUT® Professional PVC Shears
MADE FOR THE TRADE!™
DEBURRING & REAMING TOOLS
Universal Internal/External Deburring Tools
Plumbing
Quick and easy deburring. For copper, steel and stainless steel, with polished
cutting bit made of hardened special steel, smooth-running.
11006X
70075
Cat. No.
Description
lb
70075
11006X
11006R
For copper and stainless steel (O.D. 1/8" - 2")
Heavy Duty, For copper and stainless steel (O.D. 1/8" - 1 3/8")
For copper and plastic (O.D. 1/8" - 1 3/8")
0.4
0.3
0.3
11006R
Ratchet Pipe Reamer 1/4" - 2"
Rapid and clean deburring of steel tubes, with smooth-running ratchet;
cutting bit made of tempered steel.
Cat. No. Description
lb
70289
70296
5.9
0.5
Ratchet internal reamer (O.D. 1/4" - 2")
Reamer blade
Deburring Tools
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: +1.815.397.7070
Fax: +1.815.397.9247
For fast deburring of edges, tubes and sheets; replaceable blades.
21660
21655
21652
Cat. No. Description
lb
21660
0.1
21655
21652
21652B
Deburring tool with HSS deburing blade
(blade not replaceable)
Deburring tool with deburing blade no. 1
HSS deburring blade no. 1 universal, 1 pack
HSS deburring blade no. 1 universal, 10 pack
0.2
0.3
0.2
*HSS = High Speed Steel
INSTALLATION TOOLS
Strap and Fitting Wrench
USA
Tel: 800.435.0786
Fax: 800.451.2632
Made of special aluminum alloy, with replaceable nylon strap.
460
• Safe to use on chrome-plated fittings: No damage to polished surfaces
Cat. No.
Description
lb
70240
70241
12" Strap Wrench (Max O.D. 3")
12" Strap Wrench (Max O.D. 8")
1.0
1.3
www.rothenberger-usa.com
PIPE FREEZING
Freeze-Pak Instant Pipe Freezing Kit
Foam sleeves
wrap pipe and
are fastened with
plastic ties.
Check out this product
on YouTube!
under Rothenberger
FREEZE-PAK
The FREEZE-PAK is the ideal way to make quick repairs without draining or
interruption of water supply. Quick Freeze spray produces a temporary ice
plug in plumbing and heating systems that will last up to 30 minutes.
• Produces an ice plug in 10 minutes
• Works on copper, iron, lead or plastic pipes
• Works vertically and horizontally
• Safe to use - CFC free
• Size range: 1/4" - 1" O.D.
Quick Freeze is
sprayed into center
of foam wraps until
frost appears on
outside, indicating
pipe section is
frozen.
Cat. No.
Description
lb
64004
64002
64001
FREEZE-PAK Kit
Foam pipe jacket replacement, 2 pieces
Quick Freeze Spray replacement, 17.5 oz. (500 g)
1.7
0.3
1.4
Repair is made
between 2 frozen
pipe sections.
Plumbing
Kit includes 1 can Quick Freeze spray (64001), 2 foam pipe jackets, 4 plastic ties
SOLDERING AND BRAZING TORCHES
ROFIRE Hand Torch
ROFIRE with Cyclone Burner
Self-igniting piezo ignition: Immediate flame at the push of a button!
ROFIRE Hand Torch
SUPERFIRE3 Torch
Pin-point burner
Standard burner
Swirl-flame burner
Hot-air burner
Soft-flame burner
Flame reflector
0.9
1.5
0.2
0.2
0.2
0.5
0.8
0.2
Burner Tips
35455
Flame type
Tip diameter, in. (mm)
Soft soldering (750°F/400°C) max. pipe dia.
Brazing (1320°F/720°C) max. pipe dia.
Length, in.
= new product
= Replacement Part
= Accessory
Pin-point
0.59" (15mm)
3/8" (10mm)
—
5.8"
Check out this product
on YouTube!
under Rothenberger
SUPERFIRE3 Torch
35456
Standard
0.63" (16mm)
3/4" (18mm)
—
5.8"
35457
Swirl-flame
0.63" (16mm)
1 1/2" (40mm)
3/4" (18mm)
7.4"
35458
35459
Hot-air
1.50" (38mm)
—
—
10.5"
Soft
0.95" (24mm)
7/8" (22mm)
—
0.3"
461
INTERNATIONAL
35415
35431
35455
35456
35457
35458
35459
31043
The SUPERFIRE3
Designed to provide convenience and
safety to the user. The gas adjustment
offers a precise flame adjustment and the
swirl-flame “wraps” around the fitting for
quick and even heating with MAP-Pro™
or propane. A built in regulator gives a
consistent flame in all positions, even
upside down!
CANADA
lb
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Description
Tel: 800.435.0786
Fax: 800.524.2853
Cat. No.
USA
Provides fast burner exchange with a flick of the wrist.
Tel: 800.435.0786
Fax: 800.451.2632
• High-performance Piezo ignition: Reliable lighting up to 30,000 ignitions
• High-impact fiber-reinforced body
• Fine regulating valve: allows for precise flame adjustment
• Trigger on/off: Lights instantly; shuts off if dropped or released
• Trigger guard
• Locking button: Provides continuous flame for hands-free use
• Longer skirt for stability on the bottle: this reduces thread damage
MADE FOR THE TRADE!™
SWEATBOX™ II
A handy kit that includes all the tools needed to sweat copper.
Plumbing
• SUPERFIRE3 Heavy Duty Torch (35431)
Swirl-flame burner tip
Reliable Piezo ignition
MAP-Pro™/propane anti-flare
• PRO 35 Tube Cutter (70027)
Cuts 1/4" - 1-3/8" O.D. copper
Bearing designed for smooth action
Spare cutter wheel in handle
Retractable reamer
• MINI MAX Tube Cutter (70015)
Cuts 1/4" - 1-1/8" O.D. copper
Compact design
Smooth actuation
Small working radius for confined spaces
• Carry case
Cat. No.
Description
lb
P20023
SWEATBOX™ II
2.8
Torch Reflector
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
USA
Cat. No.
Description
lb
31043R
Torch Reflector (Mounting Dia. 5/8" - 7/8")
0.2
ROFIRE Swivel Torches
Tel: 800.435.0786
Fax: 800.451.2632
INTERNATIONAL
Protects surrounding materials or walls when soldering pipes.
• Mounts onto most burner tips: Nothing separate to hold or attach to pipe
• Evenly heats pipe: Saves energy and time
• Durable stainless steel
• 2-1/2" wide
462
Torch heads swivel 360° to make reaching the soldering area easier.
• Fast and easy soldering
• Cyclone burner
• Targeted, efficient heat output
35016
35012
35014
Cat. No.
Description
lb
35016
35014
35012
ROFIRE Swivel PRO Cyclone Piezo
ROFIRE Swivel PRO Cyclone
ROFIRE Swivel PRO Double Barrel
1.0
1.0
1.0
MAPP® and Propane Gas
• Extremely high flame temperature, utmost burning performance
• Guaranteed constant top burner performance
• Poses no health risks (contains no BUTADIENE)
• Easy to use
• Increased user safety
• Longer periods of use
50012
50010
Cat. No.
Description
lb
50012
50010
MAP-Pro™
Propane
2.0
2.0
www.rothenberger-usa.com
Plumber’s 7-piece Repair Kit
All the tools you need for a typical repair job in a sturdy carrying case. Kit
Includes: Heavy-duty tool bag (40231), ROTRAC 42 Plus (70021), 18” aluminum pipe wrench (70161), ROCUT 50TC shear (52010), ROFIRE swivel torch
(35016), 10” plumber’s pliers (70522), basin wrench (70225).
Cat. No.
Description
lb
70615
40231
Plumber’s 7-piece repair kit
Tool bag
17.8
4.0
PIPE AND DRAIN INSPECTION SYSTEMS
ROCAM® Mobile Cordless Drain Inspection Camera
36.0
2.3
0.65
2.0
2.0
0.3
7.5
ROCAM® Camera Locator
12.0 ft
= new product
= Replacement Part
7.6 ft
= Accessory
463
INTERNATIONAL
ROCAM Mobile color with Transmitter and distance counter
Replacement cable
Replacement Head, color, with Transmitter
Replacement battery
Replacement power supply
Guide ball
ROCAM® Camera Locator
Recording device
CANADA
Distance counter
69635NT
69480
69506NT
69550
H88953
74628
69001
69002
USA
Distance counter
Union nut with edge
protection
lb
®
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Scratch-resistant
sapphire lens
Description
Tel: 800.435.0786
Fax: 800.524.2853
Reinforced push cable
Cat. No.
Tel: 800.435.0786
Fax: 800.451.2632
ROCAM® Cordless models listed below include 2 guide skids, electrical adapter, cable.
Plumbing
• Flexible camera head for excellent maneuverability
• One-man, single-handed device
• Continuously adjustable LED brightness
• Integrated storage compartment
• For hollow spaces and drains of 2” to 6" (50 to 150 mm)
• Camera head diameter 1-1/4" (33 mm)
• Push cable diameter 3/16" (4.5 mm)
• Push cable length 118 ft (36 m)
• Main operation 110 V / 50 - 60 Hz or 24 V battery
• On-board battery charger with charge status indicator: Battery is
always charged
• Easy battery disconnect: Conserves battery power
• Fold down monitor cover: Acts as sun visor for best viewing of image
• Digital metering readout: For determining exact location of blockages
• Video In / Video Out: For optional video recording and playback
• Rugged tubular frame acts as handle: Stable positioning on any surface
Easy to carry
• ABS housing: Impact and splash resistant. Perfect for use on building sites
• Pinhole lens with LED illumination: Brilliant, clear image for easy diagnosis
MADE FOR THE TRADE!™
DRAIN CLEANING EQUIPMENT
R600 Drain Cleaning Machine
For pipes 3/4" - 6" diameter, the R600 is ideal for installation and
maintenance work in hospitals and municipal buildings.
Plumbing
• Reinforced guide hose sheathing with precision quick coupling:
Safe, kink-free cable feed; prevents dirt ingress
• Die-cast aluminum frame and fiberglass reinforced side panels:
Extremely light and sturdy
• Clamping device: For secure lengthening/shortening of cables
• Lockable drive lever: Serves as carrying handle
• Optional tri-pod stand: Provides safe, non-slip, higher position of machine
when working on toilets and inspection holes
• Cable size 7/8" (22 mm) and 5/8" (16 mm)
• For pipe sizes: 3/4" - 6" (20 - 150 mm) dia.
• Maximum working length: 200 ft. (61 m) with 7/8" cables,
165 ft. (50 m) with 5/8" cables
• Rating: 0.4 kW (0.55 HP) RH and LH drive
• Speed: 467 rpm
58182
Tel: 800.435.0786
Fax: 800.524.2853
INTERNATIONAL
CANADA
lb
72869V
72676
R600V machine only
R600 with accessories
Includes: 5 x cables 7/8" dia. (72441), cable basket (72112),
guide hose (72541), guide glove (72120), separating pin
(72101), straight auger (72221), bulb auger (72263), spade
head cutter (72261), funnel auger (72222), serrated forked
cutter (72250)
Guide Hose, 13 ft.
Clutch Jaws with springs, R600
Tri-pod Stand, collapsible
Separating Pin, 7/8", 1 1/4"
Cable Basket for 7/8” cables, 74 ft. max
Cable Guide Glove, left
Cable Guide Glove, right
Cable, 7/8” dia., 15’
46.0
105.0
72541
72638
58182
72101
72112
72120
72121
72441
72112
Cables not included
464
Description
Manual feed is done by means of a
working loop bend
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Drive lever locked in stop position — serves
as carrying handle
Cat. No.
6.0
2.0
16.5
0.1
3.6
0.5
0.5
9.5
www.rothenberger-usa.com
TEST PUMPS
RP50-S Precision Test Pump
For quick and exact compression testing and leak testing on pipe systems
and containers in plumbing and heating installation, and
in boiler and pressure vessel manufacture. Ideal for filling solar systems.
Indispensable testing device for every installer. Fill and compression test in
one work session, with water or oil.
Cat. No.
Description
lb
60200
60201
RP50-S Test Pump
RP50-S Repair Kit
16.0
0.2
Plumbing
• Twin valve system in monoblock design: constant pressure levels and
reduction of leak-prone connections
• Steel reinforced test hose: no false reading from hose buldging
• Distortion proof handle with lockable arm and ergonomic rubber grip
doubles as a carrying handle
• High performance: long-stroke for quick filling
• Testing and pressure range:
0-60 bar, 1 bar steps
0-860 psi, 20 psi steps
0-6 MPa, 0.1 MPa steps
• 3.2 gallon tank capacity
• 1.5 oz/stroke suction capacity
• Dimensions: 28-1/2” L x 6-5/8” W x 10-1/4” H
• R 1/2” connection
465
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
= Accessory
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
= Replacement Part
USA
Tel: 800.435.0786
Fax: 800.451.2632
= new product
MADE FOR THE TRADE!™
USA Authorized Service Centers*
ALABAMA
BIRMINGHAM
Alabama Jack Co.
1140 5th Ave. N 35203-1502
Telephone: 205-251-8156
Service Centers
DeWALT Factory Service
321 Valley Ave., Suite B 35209
Telephone: 205-942-0537
MOBILE
Bay City Tool & Repair Co.
4405 Halls Mill Rd., Ste. F4 36693
Telephone: 251-666-8406
ALASKA
FAIRBANKS
Aero Services Inc.
1915 ADA St. 99706
Telephone: 907-479-6666
ARIZONA
PHOENIX
Arizona Armature Service
4641 S. 33rd St. 85040-2850
Telephone: 602-276-4434
Glendale Industrial Supply
2224 N. 23rd Ave. 85009
Telephone: 602-254-4666
Glenn‘s Tool Service
2149 East Indian School Rd. 85016
Telephone: 602-264-6203
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
TUCSON
Glendale Industrial Supply
3232 E. 36th St. 85713
Telephone: 520-620-1000
466
Western Tool
702 South Campbell St. 85719-6515
Telephone: 520-884-0504
ARKANSAS
LITTLE ROCK
Clark Hydraulic Service
2901 Confederate Blvd. 72206-3300
Telephone: 501-375-1252
CALIFORNIA
ANAHEIM
Jack-X-Change
1609 N. Orangethorpe Way 92801
Telephone: 714-871-4966
Westside Building Material Corp.
1111 E. Howell Ave. 92805-6407
Telephone: 714-385-1644
GARDENA
B & G Industrial Rentals
1627 W. 130th St. 90249
Telephone: 310-327-0804
HAYWARD
California Service Tool
26250 F Corporate Ave. 94545-3900
Telephone: 510-782-1000
SAN DIEGO
South Coast Equip. Repair
9660 Chesapeake Dr. 92123
Telephone: 858-569-0929
Tool Depot
3799 Gaines St. 92110
Telephone: 619-220-7111
S. SAN FRANCISCO
C.H. Bull Co.
233 Utah Ave. 94080
Telephone: 650-871-8440
COLORADO
BRIGHTON
Quest
812 Baseline Pl. #4 80603
Telephone: 720-685-9091
DENVER
Aviation Industrial Supply
3900 Ulster St. 80207-1729
Telephone: 303-355-2391
Hydraulic Energy Products
6800 Stapleton Dr. South 80216
Telephone: 303-333-7442
CONNECTICUT
EAST HARTFORD
Jossam Tool
411 Burnham St. 06108
Telephone: 860-289-4064
NEW HAVEN
Colony Hardware Supply
15 Stiles St. 06512-1710
Telephone: 203-466-5252
FLORIDA
CLEARWATER
Atlas Construction Equipment
12001 49th St. North, Suite 201 33762
Telephone: 727-299-0700
COCOA
EHS Electric & Hydraulic Solutions
150 North Wilson Ave. 32922
Telephone: 321-632-5767
BAKERSFIELD
Bakersfield Tool Repair
210 Sumner St., Suite B 93305
Telephone: 661-327-2820
FT. LAUDERDALE
Broward Hydraulic Jack Service
3907 S.W. 12th Ct. 33312-3483
Telephone: 954-583-2504
CORONA
We-Do Equipment Repair
299 E. Harrison 92879
Telephone: 951-808-9167
JACKSONVILLE
B C Industrial Supply
10592 Balmoral Cr. E. 32218
Telephone: 904-355-1935
World Electric Service
569 Stuart Lane 32254
Telephone: 904-356-5288
ORLANDO
Contractors Tool Service
5409 Edgewater Dr. 32810
Telephone: 407-292-2808
TAMPA
Gator Repair
5128 Nebraska Ave. 33603-2364
Telephone: 813-234-8831
GEORGIA
ATLANTA
Power Tool Service Co.
1420 Collier Rd, NW 30318-2814
Telephone: 404-605-0101
HAWAII
HONOLULU
Air & Hydraulic Service
842 Ilaniwai St. 96813-5223
Telephone: 808-597-8051
IDAHO
BOISE
CPM Precision Machine
8455 Westpark St. Suite A 83704
Telephone: 208-375-0757
ILLINOIS
BERWYN
Jack’s Inc.
6642 W. 26th St. 60402-2698
Telephone: 708-788-4300
BROADVIEW
Chicago Jack Service
2000 S. 25th Ave. 60155
Telephone: 708-681-1800
DECATUR
S & K Air Power Tool and Supply
2202 N. 40th St. 62526-5519
Telephone: 217-424-8500
ELK GROVE VILLAGE
Brock Tool Co.
1475 Louis Ave. 60007-2393
Telephone: 800-332-7625
LOVES PARK
Moline Service Center
7308 Forest Hills Rd. 61111-3984
Telephone: 815-877-1777
MATTOON
HD Supply
45-55 South Rte. 45 61938
Telephone: 217-235-0546
MC COOK
Recco Tool & Supply
8805 Joliet Rd. 60525-3218
Telephone: 708-442-7850
* List is accurate as of 6/10
www.greenlee.com
PEORIA
Midwest Hydra-Line
817 N.E. Adams 61603-3901
Telephone: 309-682-1380
BALTIMORE
Brock Tool & Supply
1200 66th St. 21237-2541
Telephone: 410-483-4300
SCHAUMBURG
All Power Tool
2130 Palmer Dr. 60173
Telephone: 847-301-4000
UPPER MARLBORO
Diamond Tool Co.
8051 Penn Randall Place 19146
Telephone: 301-967-2844
INDIANA
MASSACHUSETTS
MEDWAY
Marathon Tool Industrial Supply
106 D Main St. 02053
Telephone: 800-821-4927
INDIANAPOLIS
Anderson Brothers Tool Repair
3531 Southeastern Ave. 46203-1528
Telephone: 317-356-6381
NEWTON
NEFCO
281 Newtonville Ave. 02460
Telephone: 617-464-4100
Eskew Enterprises
1447 N. Harding St. 46202
Telephone: 317-264-9028
IOWA
DES MOINES
3E Service Center
1808 Delaware Ave. 50317-6341
Telephone: 515-266-8890
The Tool Hospital
1631 2nd Ave. 50314-3406
Telephone: 515-282-3323
WOBURN
New England Hydraulic Service
21-B 6th Rd. 01801-1757
Telephone: 781-932-8880
ST. CHARLES
Tool Service Center
2431 Raymond Dr. 63301
Telephone: 636-940-2525
MICHIGAN
ANN ARBOR
McCally Tool & Supply
2445 S. Industrial Hwy. #1 48104
Telephone: 734-747-8332
KINGSFORD
IDG
1021 Pyle Dr. 49802
Telephone: 906-774-3991
ANNAPOLIS JUNCTION
Tools & Accessories
8975 Henkels Ln., Ste. 710 20701
Telephone: 410-735-8800
MINNESOTA
ST. PAUL
Total Tool Supply
315 N. Pierce St. 55104-5229
Telephone: 800-444-4899
The Tool Hospital
1720 Adams St. 68521-1823
Telephone: 402-435-2996
OMAHA
The Tool Hospital
9950 S 134th St. 68138-6199
Telephone: 402-592-5220
NEVADA
LAS VEGAS
Tool Service
3239 Industrial Rd. 89109-1140
Telephone: 702-734-9161
RENO
Titan Construction Supply
250 Edison Way 89502
Telephone: 775-351-2201
NEW JERSEY
EAST ORANGE
Von Rohr Equipment
2 New Main St. 07018-4238
Telephone: 973-673-6700
467
INTERNATIONAL
MARYLAND
WARREN
H & P Technologies
21251 Ryan Rd. 48091-4666
Telephone: 586-758-0100
LINCOLN
Total Tool
800 Q St. 68508-1388
Telephone: 402-476-6673
Tel: +1.815.397.7070
Fax: +1.815.397.9247
NEW ORLEANS
Beerman Precision, Inc.
4206 Howard Ave. 70125-1327
Telephone: 504-207-6000
NUNICA
Grand Valley Hydraulics
12259 D Cleveland St. 49448
Telephone: 800-621-1316
NEBRASKA
CANADA
MIDLAND
Mid-Michigan Repair Service
680 Poseyville Rd. 48640
Telephone: 989-835-6014
ST. LOUIS
Authorized Equipment Service
1735 Delmar Ave. 63103
Telephone: 314-772-8024
Tel: 800.435.0786
Fax: 800.524.2853
LOUISVILLE
Bailey Tools & Supply Co.
1338 S. Shelby St. 40217-1107
Telephone: 502-635-6348
Unlimited Supply
17820 Sotile Dr. 70809
Telephone: 225-752-3660
Shaw Supply Co.
1066 E. 16th St. 64108-1553
Telephone: 816-221-0060
MARYLAND HEIGHTS
Frost Electric Supply
2429 Schuetz Rd. 63043
Telephone: 314-567-4004
LIVONIA
Brock Tool
31090 Industrial Rd. 48150-2033
Telephone: 734-261-9333
BATON ROUGE
The Tool Shed
1856 Woodale Ct. 70806
Telephone: 225-926-6500
KANSAS CITY
Heath Sales & Service
518-20 E. 16th St. 64108-1543
Telephone: 816-421-3330
WESTFIELD
Toomey Associates
1100 Russell Rd. 01086-0577
Telephone: 413-562-5192
LEXINGTON
Bluegrass Tool Warehouse
1175 Brock McVey Dr. 40509-4116
Telephone: 859-252-1849
LOUISIANA
CUBA
Hoyt’s Hydraulic
1019 Basham Hills Dr. 65453
Telephone: 573-885-3379
Tel: 800.435.0786
Fax: 800.451.2632
KENTUCKY
MISSOURI
USA
SIOUX CITY
Triple H International
1658 Hwy 20 51106
Telephone: 712-202-0977
JACKSON
Stuart C. Irby
815 S. President St. 39201-5806
Telephone: 601-969-1811
Service Centers
EVANSVILLE
Bailey Tools & Supply Co.
5716 E. Morgan Ave. 47715
Telephone: 812-475-1618
MISSISSIPPI
MADE FOR THE TRADE!™
KEYPORT
Semcor Equipment & Mfg. Corp.
18 Madison St. 07735-1194
Telephone: 732-264-6080
WANTAGH
Ace Tool Repair
2201 Wantagh Ave. 11793-3917
Telephone: 516-783-8899
NEWARK
Metro Hydraulic Jack
1271 McCarter Hwy. 07104-3711
Telephone: 973-350-0111
WOODSIDE
Bryant Tool & Supply
61-10 34th Ave. 11377-2228
Telephone: 718-672-1300
Service Centers
NEW MEXICO
ALBUQUERQUE
Power Tool & Saw
2800 Richmond Dr. NE 87107
Telephone: 505-856-2158
NEW YORK
AMHERST
Philipps Bros. Supply
2525 Kensington Ave. 14226-4999
Telephone: 716-839-4800
CLEVELAND
A & A Hydraulic Repair
5301 W. 161st St. 44142
Telephone: 216-362-4000
INTERNATIONAL
Tel: +1.815.397.7070
Fax: +1.815.397.9247
GARDEN CITY PARK
Eastern Industrial Equipment
2231 Jericho Tpke. 11040-4797
Telephone: 516-741-3198
HUNTINGTON STATION
A & T Power Tools
515 E Jericho Tpke. 11746-7311
Telephone: 631-271-2141
NEW YORK
T. P. Rental Service
417 W. 50th St. 10019-6527
Telephone: 212-713-1999
RENSSELAER
Albany Hydraulic & Lube Service
98 A Columbia Tpke. 12144-3412
Telephone: 518-462-5425
SYRACUSE
Ace Hydraulic & Pneumatic
6720 V.I.P. Pkwy. 13211-7326
Telephone: 315-454-8989
ROCHESTER
Hanes Supply Co.
10 Cairn St. 14611-2416
Telephone: 585-235-0160
Charles Haller Enterprises
4079 New Court Ave. 13206-1640
Telephone: 315-433-0011
M.W. Bevins Co.
9903 E. 54th St. 74146
Telephone: 918-627-1273
OREGON
BEAVERTON
Karn Repair Service, Inc.
1800 N.W. 169th Place, Suite D300 97006
Telephone: 503-690-9500
EUGENE
Les’s Hydraulic
2550 W. 5th Ave. 97402-2628
Telephone: 541-343-4041
PENNSYLVANIA
OHIO
BUFFALO
Buffalo Hydraulic Jack Service
488 Walden Ave. 14211-2498
Telephone: 716-893-6510
Tel: 800.435.0786
Fax: 800.524.2853
CANADA
RICHFIELD
Horizon Hydraulic Sales & Service
37615 Paul’s Crossing Rd. 28137
Telephone: 704-463-1070
CINCINNATI
Contractors Choice
2070 Schappelle Lane 45240-2713
Telephone: 513-851-9070
Tel: 800.435.0786
Fax: 800.451.2632
USA
DURHAM
Payne’s Tool & Supply
5010 Hwy 55 27713
Telephone: 919-544-9134
BROOKLYN
J & A Repair Shop
6206 20th Ave. 11204-3023
Telephone: 718-232-5746
CHADWICKS
Mohawk Ltd.
1 Newell Lane 13319
Telephone: 315-737-7328
468
NORTH CAROLINA
TULSA
Mac’s Hydraulic Jack Service
10312 E. 52nd St. 74146-5809
Telephone: 918-627-5505
Ohio Hydraulic Jack Service
1408 E. 25th St. 44114-2123
Telephone: 216-298-6900
COLUMBUS
J. J. Hammond Service
1037 McKinley Ave. 43222-1136
Telephone: 614-228-8448
U.S. Hydraulic Services
2355 Refugee Park 43207
Telephone: 614-443-1433
ELIDA
Aircraft Dynamics
418 E. Kiracope Ave. 45807
Telephone: 419-331-0371
HARRISON
Brenco Inc.
7780 Willey Rd. 45030-9764
Telephone: 513-738-1808
F & M Mafco
9149 Dry Fork Rd. 45030-1901
Telephone: 513-367-2151
YOUNGSTOWN
Pennsylvania Tool Sales & Service
625 Bev Rd. 44512-6421
Telephone: 330-758-0845
OKLAHOMA
OKLAHOMA CITY
Whitton Supply
1419 W. Reno 73106
Telephone: 405-236-5561
BETHLEHEM
Albarell Electric
1523 Easton Ave. 18017-5934
Telephone: 610-691-7030
MECHANICSBURG
Drivekore
101 Wesley Dr. 17055
Telephone: 717-697-8233
PHILADELPHIA
Auto Wheel and Rim
2731 E. Castor Ave. 19134-5593
Telephone: 215-288-9222
PITTSBURGH
CTS, Inc.
3500 Liberty Ave. 15201-1325
Telephone: 412-681-6673
RHODE ISLAND
WARWICK
Tri-Power Sales & Service
64 Minnesota Ave. 02888-6011
Telephone: 401-732-3390
SOUTH CAROLINA
CHARLESTON
Baldwin Brothers, Inc.
2132 Spruill Ave. 29405
Telephone: 843-744-6323
TENNESSEE
KNOXVILLE
Lubrication Equipment Service
2501 Mitchell St. 37917-6139
Telephone: 865-525-8401
MEMPHIS
Authorized Equipment Service
812 Polk Ave. 38126-4198
Telephone: 901-774-0850
NASHVILLE
DeWALT Factory Service
746 Fesslers Ln. 37210
Telephone: 615-242-1633
* List is accurate as of 6/10
www.greenlee.com
Reeves Power Tool Repair
108 Lafayette St. 37210-3435
Telephone: 615-256-8817
TEXAS
AUSTIN
Austin Tool
210 Industrial 78745
Telephone: 512-447-4905
DALLAS
Hydraulic Service & Supply
100 Howell St. 75207
Telephone: 214-748-6015
Southwestern Jack Corp.
149 Yorktown St. 75208-2135
Telephone: 214-748-2844
FT. WORTH
FWB Rentals
920 Foch St. 76107
Telephone: 817-335-2895
HOUSTON
Hydraulic Equipment Service
1011 Rothwell St. 77002-1162
Telephone: 713-228-4073
J & T Tool Supply
5317 Inker 77007
Telephone: 713-880-8013
UTAH
RICHMOND
Staley Co.
1000 W. Roberts St. 23220
Telephone: 804-321-6595
SALEM
Capital Equipment Sales
1451 Lakeside Circle 24153-4144
Telephone: 540-387-0473
WASHINGTON
SEATTLE
Universal Repair Shop
1611 Boylston Ave. 98122-2217
Telephone: 206-322-2726
SPOKANE
Edge Construction Supply
1503 E. Riverside 99202
Telephone: 509-535-9841
WISCONSIN
CAMBRIDGE
C & M Hydraulic Tool Supply
203 Commerce Ave. 53523-9133
Telephone: 608-423-3507
GREEN BAY
Bay Verte Machinery Co.
975 Parkview Rd. 54304-5556
Telephone: 920-336-7440
PEWAUKEE
Jensen Equipment Co.
N27 W23015 Roundy Dr. 53072
Telephone: 262-547-5548
PUERTO RICO
SALT LAKE CITY
Gustin Hydraulics
151 W. Commonwealth Ave. 84115
Telephone: 801-487-0624
SAN JUAN
Ferreteria Abraham
Calle 16 So. 1534 Caparra Terr. 00922
Telephone: 787-782-6033
469
INTERNATIONAL
RIO PIEDRAS
Isla Supply Corp.
Carretera 181, KM. 1.8 00929
Telephone: 787-761-7355
Tel: +1.815.397.7070
Fax: +1.815.397.9247
MURRAY
Johnson Hydraulics
4370 S. 500 West 84123
Telephone: 801-972-0909
CANADA
Tool Mart
10568 Sentinel 78217
Telephone: 210-655-6116
NORFOLK
HyVal Industries, Inc.
898 Widgeon Rd. 23513
Telephone: 757-855-2026
Tel: 800.435.0786
Fax: 800.524.2853
SAN ANTONIO
Mueller Hydraulic & Tool Repair
515 N. Hackberry St. 78202-2222
Telephone: 210-224-5271
ALEXANDRIA
D & S Repair Service
20 S. Dove St. 22314-4699
Telephone: 703-683-0009
USA
LUBBOCK
Hydraulic Equipment Service
328 Buddy Holly Ave. 79401-1434
Telephone: 806-763-7621
VIRGINIA
Tel: 800.435.0786
Fax: 800.451.2632
Tool Mart
2412 Texas Ave. 77003-3196
Telephone: 713-222-8665
ESSEX JUNCTION
Burlington Tool Repair
3 Kellogg Rd. 05452-2801
Telephone: 802-872-0051
Service Centers
CARROLLTON
FWB Rentals
1419 Hutton Dr. 75006
Telephone: 972-245-6017
VERMONT
MADE FOR THE TRADE!™
Canada Authorized Service Centers*
Service Centers
ALBERTA
SASKATCHEWAN
CALGARY
Western Utility Equipment
3347 58th Ave. SE T2C 0B4
Telephone: 403-291-1121
SASKATOON
Ted’s Power Tool Repair Ltd.
426 44th St. East S7K 0W1
Telephone: 306-934-6155
EDMONTON
Celtic Industrial Supply
OK Power Tool
5736 103A St. T6H 2J5
Telephone: 780-431-0970
Test Instruments Only
BRITISH COLUMBIA
SURREY
Trydor Industries Ltd.
19275 25th Ave. V3S 3X1
Telephone: 604-542-4773
VANCOUVER
Hymach Industries Ltd.
90 E 3rd Ave. V5T 1C3
Telephone: 604-879-5418
MANITOBA
WINNIPEG
Athena Small Equipment Repair
1125 Empress St. R3E 3H1
Telephone: 204-786-1900
(Appareil de contrôle seulement)
ONTARIO
WOODBRIDGE
Cal - Lab Instrumentation Co.
4120 Steeles Ave. West, Unit 5 L4L 4V2
Telephone: 905-850-8826
QUEBEC
STE-ANNE-DE-BELLEVUE
ITM Instruments Inc.
20800 Industriel Boulevard H9X 0A1
Telephone: 514-457-7280
ONTARIO
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
HAMILTON
Hydraulic Equipment Sales
495 Rennie L8H 3P6
Telephone: 905-545-8211
470
KITCHENER
The Tool Doctor Ltd.
30 Manitou Dr. N2C 1L3
Telephone: 519-748-4780
LONDON
AC Jenkins Electric Repair Ltd.
1188 Frances St. N5W 2M1
Telephone: 519-451-4020
MISSISSAUGA
All Trade Equipment
1145 Westport Cres. L5T 1E8
Telephone: 416-798-4881
SCARBOROUGH
The Tool Doctor Ltd.
70 Milner Ave. Unit 2 M1S 3P8
Telephone: 416-292-2290
THUNDER BAY
Equipment World Inc.
988 Alloy Dr. P7B 6A5
Telephone: 807-623-9561
QUEBEC
MONTREAL
Inolec, Inc.
100 Port-Royal St. East H3L 1H7
Telephone: 514-384-9021
QUEBEC
Service D’Outillage, Inc.
2410 Boul Central G1P 3N8
Telephone: 418-682-0560
* List is accurate as of 6/10
www.greenlee.com
Alphabetical Product Index
A
D
CANADA
INTERNATIONAL
471
USA
Data Cable Caddy............................... 418
DataComm Pro Starter Kit................... 345
DataComm Pro Starter Kit Max
with PT-510 PowerPlay Tool............... 345
Datacomm Snips & Knife Kit............... 237
Data/Link ID and Cable-Check............ 294
Data Mate® Precision Tracing
Tone Generator................................... 284
DataReady™ Kit................................. 346
DataReady™ Pro Kit.......................... 346
Data SureStrip™................................ 240
Deburring & Reaming Tools/
Basin Wrenches.................................. 460
Deburring Tools............................ 94, 460
Deluxe A-Frame Wire Cart.................. 421
Deluxe Carrying Case.................. 403-405
Deluxe Electrical Test Lead Kit............ 400
Deluxe Force Gauge............................ 158
Deluxe Wire Caddy............................. 419
Desoldering Tools............................... 275
Diagonal Cutting Pliers........................... 5
Dieless Crimping Tools................. 206-209
Die Sets for Coaxial
Connectors......................... 267, 270, 273
Die Sets for Insulated Terminal
Crimpers..................................... 269, 271
Die Sets for Modular Plugs................. 268
Die Sets for Non-Insulated Terminal
Crimpers..................................... 269, 271
Die Sets for Open Barrel and Terminal
Systems............................................. 271
Die Sets for Open Barrell.................... 269
Die Sets for Specialty Crimpers.......... 268
Die Sets for Wire Ferrules........... 269, 271
Die-Type Crimping.............................. 197
Digital/Analog Megohmmeter.............. 395
Digital Light Meter.............................. 399
Digital Multimeter, 500, 000-Count....... 365
Digital Signal Identifier........................ 305
Double-Braided Composite Rope
for High Force Cable Pullers............... 166
Double “D” Punches............................. 73
“D” Punches......................................... 73
Drain Cleaning Equipment.................. 464
Draw Studs For Knockouts................... 75
Drill/Taps.............................................. 81
Drop Anchors...................................... 106
D-Sub Indent Crimpers....................... 225
Dual NM Cable Ripper............................ 9
Dual Port Ground Block....................... 250
Dual Wavelength Laser Source........... 327
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Cabinet Tip Screwdriver........................ 13
Cable Bending Tools........................... 219
CableCaster®...................................... 138
Cable-Check™................................... 289
Cable-Cream®.................................... 167
Cable-Cream® Cable Pulling
Lubricant............................................ 168
Cable Cutter................... 27-28, 187-188,
.................................................236-237
Cable Cutters for ACSR, Guy Strand
& Steel Selection Guide, .................... 190
Cable-Gel® Cable Pulling
Lubricant..................................... 167-168
Cable Guide................................ 161, 163
Cable Lubricant Quantity Chart........... 167
Cable Preparation Instructions for
Set Screw Clamp-Type Pulling Grips... 172
Cable Puller Set-Up............................ 149
Cable Puller Selection Guide . ............ 148
Cable Pull Force Estimator.................. 159
Cable Pulling...................................... 145
Cable Pulling Lubricants..................... 167
Cable Reel Transporter........................ 423
Cable Ripper........................................... 9
CableScout™ TV90............................ 306
CableScout™ TV220TDR.................... 307
Cable Splicer’s Knife........................... 237
Cable Stripping Tool............................ 220
Cable Test Set..................................... 300
Cable Tie Gun..................................... 275
Cable Tray Accessories....................... 164
Cable Tray Rollers............................... 164
Cable TV Coax Termination
and Test Kit........................................ 351
Cable TV Coax Termination Kit............ 350
Cable TV “F” Flaring &
Attachment Tool.................................. 246
Cable TV “F” Terminators.................... 250
Cable TV Splitters............................... 253
Cabling Pouch.................................... 290
Caddy, 10-Reel . .................................. 420
Caddy, 6-Reel . .................................... 420
Caddy, 7 Pocket...................................... 36
Caddy Basket Cable Dispenser........... 424
Cam Track® Benders and
Shoe Groups....................................... 120
Canada Authorized Service Centers.... 470
Canvas Bag, 20” Electrician’s ................ 34
Canvas Work Apron, 2 Pocket ................ 39
CrimpALL® Interchangeable Die Sets
for Non-Insulated Terminal Crimpers.. 269
CrimpALL® Interchangeable Die Sets
for Open Barrell.................................. 269
CrimpALL® Interchangeable Die Sets
for Specialty Crimpers........................ 268
CrimpALL® Interchangeable Die Sets
for Wire Ferrules................................. 269
Crimping Die Carrying Case................ 213
Crimping Dies for 4-Ton EK410L Tools. 210
Crimping Dies for 6-Ton Tools............. 211
Crimping Dies for 12-Ton Tools........... 212
Crimping Heads, 12-Ton
Remote-Powered . ............................... 202
Crimping/Stripping
Combination Tool............................. 10-11
Crimping Tool, 15-Ton ......................... 204
Crimping Tools, 12-Ton
Manual Hydraulic ................................ 201
Crimping Tool 8-1 AWG....................... 204
Crimping Tool Capacities.................... 196
Crimping Tool Load Cell...................... 213
Crimping Tool Test Meter.................... 214
Cutting Oil.......................................... 447
Cutting/Threading Oil.......................... 435
Tel: 800.435.0786
Fax: 800.524.2853
Ball-end Set......................................... 22
Band Saw Blades............................... 104
Band Saws......................................... 104
Bare Fiber Adapter.............................. 324
Basic Electrical Kit.............................. 392
Basic LAN Tool Kit............................... 347
Basket-Type Pulling Grip Sets............. 174
Battery Charger Adapter..................... 214
Battery-Powered 4-Ton Crimping Tool. 197
Battery-Powered 6-Ton
Crimping Tools............................. 198-199
Battery-Powered 12-Ton
Crimping Tools.................................... 200
Battery-Powered 15-Ton
Crimping Tool........................................ 203
Battery-Powered ACSR &
Guy Wire Cutters................................. 191
Battery-Powered Bolt Cutter............... 188
Battery-Powered
Cable Cutter........................ 182-184, 194
Battery-Powered Fine Stranded
Copper Cable Cutter........................... 182
Battery-Powered Knockout Punch
Driver Kits Parts List............................. 62
Battery-Powered Quad-Point
Dieless Crimping Tools........................ 206
Bead Temperature Probe.................... 398
Bench Yoke Vice................................. 448
Benders, Electrical.........................116-117
Benders, Hydraulic.........................118-124
Benders, Mechanical.....................113-115
Benders, SITE-RITE® Hand.................. 113
Bending....................................... 111-127
C
Canvas Zipper Bag, 12”........................ 39
Can Wrench........................................ 260
Carbide-Grit Hole Saws........................ 96
Carbide-Tipped Hole Cutters................. 92
Casters............................................... 417
Category 5 Data Termination and
Test Kit............................................... 352
CATV Cable Stripper............................ 244
CATV Cable Tone Test Kit.................... 288
CATV/UTP Stripper.............................. 244
Caulking Anchors................................ 106
CCX.................................... 178, 215, 218
CCXL Tools.......................................... 179
CCX Tool Accessories.......................... 180
Center Conductor Cutter..................... 236
Certified Reference Cables................. 333
C-Frame Punches................................. 71
C-Frame Punch Drivers, ........................ 71
Chain Pipe Wrench 4”......................... 455
Chain Tube Cutter............................... 459
Chain-Type Pipe Vise.......................... 435
Chests................................................ 410
Circuit Tracing............................. 383-385
Circuit Seeker™ Circuit
Tracer, CS-8000........................... 383-384
Circuit Verifying.................................. 392
Clamp-on Adapter, 3000A . .................. 372
Clamp-on Current Adapter.................. 372
Clamp-on Meters......................... 373-382
Clamp-on Meter, 1000A AC ................. 378
Clamp-on Meter, 1000A AC/DC . .......... 377
Clamp-on Meter, 600A AC.................... 380
Clamp-on Meter, 600A AC/DC . ............ 379
Clamp Pincer Ratchet Tools................ 453
Classic 77 Series Tone Generators...... 281
Classic Tone and Probe Kit.................. 287
Clear Lube™.............................. 167, 169
Clip-On Twisted Pair Kit...................... 350
Coax 3-Way Tool................................. 247
Coax Connector Insertion Tool............. 246
Coaxial Cable Tester........................... 296
CoaxReady™ Kits.............................. 343
Coax Stripper............................... 242-243
Coax/Twisted Pair LAN
Termination and Test Kit..................... 351
COLLINS® Classic 22A........................ 445
COLLINS E-Z Cutter®.......................... 449
Combination Drill/Tap Bits.................... 81
Combination Ratcheting
Wrenches........................................ 23-24
Combination Tool.................................. 10
Combo UTP/Coax SureStrip™............ 240
Communications................................. 233
Communications And Underground
Power Cable Cutting........................... 194
Communications Kits.......................... 338
Compact Ratchet Cable Cutters.......... 186
Compact Threading Machines............. 443
Compression Crimping Tool................ 248
Computer Service Kit.......................... 349
Conduit and Pipe Bit Sets..................... 85
Conduit and Pipe Storage Rack.......... 423
Conduit Pistons................................... 142
Conduit Reaming Screwdriver............... 20
Connector Cleaning Systems.............. 280
Copper And Aluminum Cutting............ 181
Copper & Aluminum Cable Cutting
Selection Guide, ................................ 181
Cordless Screwdriver & Socket Set..... 349
Crank Action Screwdriver..................... 14
CrimpALL® 8000 Series Crimpers....... 266
CrimpALL® Interchangeable Die Sets
for Coaxial Connectors........................ 267
CrimpALL® Interchangeable Die Sets
for Insulated Terminal Crimpers.......... 269
CrimpALL® Interchangeable Die Sets
for Modular Plugs............................... 268
Tel: 800.435.0786
Fax: 800.451.2632
B
Bending Degree Protractor.................. 127
Bending Handbook and
Slide Rule Bending Calculators........... 127
Bending Selection Guide..................... 112
Bending Table............................. 121, 125
Bi-Fold Cabinet................................... 414
Bi-Metal Hole Saw Kits......................... 98
Bi-Metal Hole Saws......................... 95-96
Bit Extensions....................................... 84
BNC and CATV “F”
Extraction Tools.................................. 247
BNC Coaxial Connectors..................... 252
BNC Coax Multi-Tool........................... 247
Bolt Cutters................................. 428-429
Bottle Opener....................................... 20
Box and Terminal Systems.................. 269
Breakaway Swivels............................. 171
Breaker Finder.................................... 385
BroadcastReady® Kit.......................... 344
Bubble Level......................................... 32
Buried Facility Location
And Marking....................................... 334
Buried Line Locator.................... 334, 389
Bushings for Metal Stud Punches......... 80
Butt Set.............................................. 298
BX-Armored Coiled Cable Dispenser... 424
Index
Abrasion Shield.................................... 90
AC Adapters for
Battery-Powered Tools........................ 214
Accessories, Crimping........................ 213
Accessories For Hand And
Power Threaders................................ 441
AC Clamp-on Meter..................... 381-382
AC/DC Clamp-on Current Adapter....... 372
ACSR Cable Cutter.............................. 193
ACSR, Guy Strand & Steel Cutting....... 190
Adapter Cleaning Wands..................... 280
AdapToner Kit..................................... 287
AdapToner Modular Breakout
Tone Generator................................... 282
Adjustable Cable Stripper................... 220
Adjustable Non-Contact
Voltage Detector................................. 362
Adjustable Wire Stripper & Cutter....... 256
Adjustable Wrenches............................ 21
Adjustable Wrench with
Composite Handle................................ 21
Advanced Optical Power Meters......... 320
Advanced Single-Mode
Optical Loss Test Set.......................... 317
Alarm Loop Verifier/Tone Generator.... 284
All-in-One Pro Telephone Tools........... 263
All-in-One Ultra Telephone Tools......... 263
All-in-One UTP Snagless Crimper....... 263
Aluminum Offset Pipe Wrench............ 455
Aluminum Pipe Wrench....................... 455
Analog Multimeter.............................. 371
Anchors and Fasteners....................... 105
Arbors with Replacement High-Speed
Steel Pilot Drill Bits............................... 97
Armored Coiled Cable
Dispenser/Transporter........................ 424
Auger Bits............................................. 83
Automatic Electrical Tester.................. 361
Automatic Tube Cutter........................ 457
Automatic Wire Stripper.......... 9, 221, 338
Averaging Digital Multimeter............... 369
Aviation Snips....................................... 27
MADE FOR THE TRADE!™
Dual Wavelength LED Source.............. 325
D’VersiBIT® Starter Kit.......................... 88
D’VersiBIT® System......................... 87-88
Index
E
Economy Fiber Optic Stripper............. 277
Economy Kevlar® Cutter..................... 277
EDAC/ELCO Crimper........................... 224
EHS Guy Wire Cutter........................... 192
Electrical Benders............................... 116
Electrical Terminal Crimper................. 224
Electrical Testers......................... 359-360
Electric & Battery-Powered
Knockout Kits....................................... 61
Electric Hydraulic Pump............... 431-432
Electrician’s Hammer............................ 34
Electrician’s Scissors.......................... 237
Electrician’s Tool Kit......................... 41-42
Electrician’s Torpedo Level.................... 32
Electric PVC Heater............................. 129
Electronic Connector Panel Punches..... 74
EMT Conduit Cutter.............................. 31
ESM™ Digital Logging Meter............. 365
ESM™ Series
Digital Multimeters...................... 366-367
Extensions............................................ 90
Extra-Large Alligator Clips.................. 401
E-Z Bore® Bits...................................... 85
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
F
472
Fault Locators and Light Detectors..... 323
Fault Loop Simulator, 1155 . ................ 301
FC-PC and MT-RJ Visual Fault Finders. 323
Feeding Sheaves................................ 162
Female Splice Adapter........................ 250
Fiberglass Fish Tapes.......................... 134
Fiberglass Measuring Tapes.................. 31
Fiber Optic Buffer Stripper.................. 276
Fiber Optic Consumables Kit............... 280
Fiber Optic Co-Polymer
Polishing Puck.................................... 279
Fiber Optic Hand Tools Kit.................... 354
Fiber Optic Inspection Microscope...... 280
Fiber Optic Instrument Adapters.. 329-330
Fiber Optic Kits................................... 354
Fiber Optic Polishing Pad.................... 279
Fiber Optic Polishing Pucks................. 279
Fiber Optic Power Meter..................... 310
Fiber Optic Scribe............................... 278
Fiber Optic Termination Kit.................. 355
Fiber Optic Tools................................. 276
FiberReady Tool Kit............................. 356
fiberSAFE™ LAN Adapter Kit.............. 331
fiberSAFE™ USA/Canada
Telecom Adapter Kit............................ 331
fiberSAFE™ Worldwide
Telecom Adapter Kit............................ 331
Fiber Testing Applications................... 332
fiberTOOLS™ Carrying Cases............. 328
fiberTOOLS™ MT-RJ Optical Loss
Test Sets............................................ 319
fiberTOOLS™ Multimode
Optical Loss Test Sets......................... 319
fiberTOOLS™ Single-Mode
Optical Loss Test Sets......................... 318
Field Office......................................... 416
Filter Tone Probe................................. 286
Fishing................................................ 131
Fish Line............................................. 143
Fish Poles........................................... 137
Fish Stix®........................................... 136
Fishing System, 690 Vacuum/
Blower Power ...................................... 139
Flat Cable Cutter................................. 239
Flat-Steel Fish Tape............................ 133
Flat Telephone Cable Cutter/Stripper... 239
Flat-Top Boxes.................................... 412
Flexible Conduit Cutters...................... 102
Flexible Fish Tape Leader.................... 135
Flexible LED Flashlight.......................... 33
Flexible Mandrel................................. 170
Flex-O-Twist® Flexible Fish
Tape Leader........................................ 135
Flex Splitter® BX and Flexible
Conduit Cutter.............................. 30, 102
Flip-Top® Benders and
Shoe Groups................................ 118-119
Folding Ball-end Set, 9 Piece.................. 22
Folding Hand Caddy............................ 418
Folding Hex Key Set, 9 Piece ................. 22
Foot Switch for Cable Pullers.............. 159
Freeze-Pak Instant Pipe Freezing Kit... 461
F-Style Coaxial Connectors................. 251
Fused Test Leads................................ 400
Fuse Selection Guide.......................... 406
G
Gas Lamp Tester................................. 399
Gator® ES32FL Battery-Powered Fine
Stranded Copper Cable Cutter............ 182
Gator® ES32L Battery-Powered
Cable Cutter....................................... 182
Gator® ES750 Battery-Powered
Cable Cutter....................................... 183
Gator® ES1000 Battery-Powered
Cable Cutter....................................... 183
Gator® ESC85L Battery-Powered
Cable Cutter....................................... 194
Gator® ETS8L Cable Tray Cutter.......... 189
Gator® 12-Ton Battery-Powered
Crimping Tools.................................... 200
Gator® Battery-Powered
4-Ton Crimping Tool............................ 197
Gator® Battery-Powered
15-Ton Crimping Tool.......................... 203
Gator® Battery-Powered ACSR
& Guy Wire Cutters............................. 191
Gator® Battery-Powered and Corded 6-Ton
Crimping Tools.................................... 199
Gator® Battery-Powered and Corded
Quad-Point Dieless Crimping Tools..... 208
Gator® Battery-Powered
Cable Cutters...................................... 184
Gator® Battery-Powered Quad-Point Dieless
Crimping Tools.................................... 206
Gator® Terminal Crimping Tool............ 221
Gator® CCXL Tools.............................. 179
GFCI and Circuit Tester....................... 393
Glo Stix®. ........................................... 136
Gloves.................................................. 39
Grabber with Alligator Tip................... 401
Grabber with Hook Tip........................ 401
Greenlee Green Spray Touch-up Paint. 434
Grip Pack Kits..................................... 338
GripP-Strippers 10 & 20..................... 239
Grips................................................... 172
Ground Resistance Tester................... 375
Guy Wire Cutter Dies........................... 193
H
Hack Saw, 12”.............................. 29, 103
Haines Cable Tray Rollers................... 165
Hand Caddy........................................ 418
Hand Crank Wire Puller....................... 157
Hand Hydraulic Dieless Crimping Tool. 208
Hand-Operated Hydraulic Pump.......... 431
Hand Saws.............................. 28-29, 103
Hand Threaders.................................. 439
Hand Tools.............................. 3, 234, 428
Hand Truck / Wire Cart................. 421-422
Hanging Cable Dispenser.................... 425
Heat Gun............................................ 275
Hex Crimp Cable TV “F” Connectors... 249
Hex Key Set.......................................... 22
HICKEYS with Welded Handles..... 112-113
High Dexterity Gloves............................ 39
High Leverage Side-Cutting Pliers.......... 4
High Performance Ratchet ACSR
Cable Cutter....................................... 192
High-Speed Installation Tool................ 110
Holemaking.......................................... 43
Holemaking Selection Guide ................ 44
Hole Saws............................................ 95
Hook Sheaves..................................... 160
Hook-Type Sheaves............................ 160
Hydraulic ACSR Cable Cutter............... 191
Hydraulic Benders.............................. 118
Hydraulic Cable Bender...................... 219
Hydraulic Cable Cutters...................... 184
Hydraulic Communications and
Underground Power Cable
Cutter Head........................................ 195
Hydraulic Foot Pump........................... 431
Hydraulic Hand Pump......................... 430
Hydraulic Hose Selection Guide.......... 433
Hydraulic Hose Units........................... 433
Hydraulic Knockout Kits........................ 63
Hydraulic Oil....................................... 434
Hydraulic Pumps........................ 427, 430
I
Immersion Temperature Probe............ 398
Impact Punchdown Tools.................... 258
Indentor Crimping Tool........................ 209
Industrial Clamp Meter....................... 376
Industrial Test Lead Kit....................... 400
Infrared Thermometer......................... 397
InGaAs Optical Power Meter............... 321
In-Line Amplifier................................. 253
Inspector GFCI and Circuit Tester........ 393
Installation Tools................................. 460
Insulated Nut Driver.............................. 26
Insulated Nut Driver Set, 7 Piece.......... 26
Insulated Screwdriver........................... 25
Insulated Screwdriver Set, 6 Piece....... 25
Insulated Test Leads........................... 402
Insulated Twin Wire Ferrules............... 228
Insulated Wire Ferrules................ 227-228
Insulation Testing................................ 394
Interchangeable Die Sets for Coaxial
Connectors, 1600 Series ..................... 270
Interchangeable Die Sets for
Insulated Terminal Crimpers,
1600 Series . ....................................... 271
Interchangeable Die Sets for
Non-Insulated Terminal Crimpers,
1600 Series . ....................................... 271
Interchangeable Die Sets for
Open Barrel and Terminal Systems,
1600 Series . ....................................... 271
Interchangeable Die Sets for
Wire Ferrules, 1600 Series .................. 271
Interface Kits...................................... 371
J
Jig Saw Blades................................... 102
Journeyman’s Tool Kit...................... 40-41
Junior Basket-Type Pulling Grips........ 174
K
K Basket-Type Pulling Grips................ 175
Keyhole Saw................................. 28, 103
Key Punches......................................... 72
Keyway Punch........................................ 72
Keystone Tip Screwdriver..................... 12
Knockout Punch Driver Kits.................. 61
Knockout Punch Kits............................. 58
Knockout Punch Parts
Assortment Cabinets............................. 70
Knockout Punch and Driver
Selection Guide, .................................. 45
K-Series Crimping Tools...................... 205
Kwik Cycle® 9..................................... 222
Kwik Cycle® 9” Crimp Frame.............. 272
Kwik Cycle® 9” Interchangeable
Die Sets....................................... 273-274
Kwik Cycle® Cable Tie Guns................ 275
Kwik Cycle® Crimping Tool.................. 223
Kwik Stepper® Step Bits....................... 82
Kwik Stripper®. ................... 239, 243-244
Kwik Stripper® CATV/UTP Stripper...... 244
Kwik Stripper® Heavy-Duty
Wire Stripper...................................... 220
Kwik Stripper® Wire Stripper........... 9, 221
L
Lamp Tester........................................ 399
LAN and A/V Cable-Check™.............. 295
LAN Cable-Check™........................... 295
LAN ProNavigator™ Tester & Remote. 293
LAN Pro Starter Kit............................. 348
LAN Toner........................................... 283
LAN Toner Kit...................................... 288
LAN Tracing Kit, 802K Digital ............... 288
Laser Sources............................. 311, 327
Leather Pouch................................. 37-38
Leather Pouch, 4 Pocket....................... 38
Leather Pouch, 5 Pocket....................... 37
Leather Pouch, 8 Pocket....................... 37
Leather Tool Belt................................... 38
LED Source, 850/1300nm ................... 311
LED Sources................................ 325-326
Levels........................................... 32, 126
Light Base Sheave.............................. 163
Light-Duty Basket-Type Pulling Grips.. 174
Li’l Fisher® 390 Power
Fishing System................................... 140
Line Packages.................................... 143
Line Splitter . ....................................... 403
Little Kicker® Offset Bender................ 114
Load Coil Detector.............................. 304
Locators............................................. 388
Long Auger Wood Bits........................... 84
Long Nose Pliers/Side Cutting................. 6
Lube Spreader Swab.......................... 169
M
MagnumPRO™ Fish Tapes.......... 132-135
MagnumPRO™ Fiberglass
Fish Tapes.......................................... 134
MagnumPRO™ Flexible Steel
Fish Tapes.......................................... 133
MagnumPRO™ Oil-Tempered
Spring Steel Fish Tapes...................... 132
MagnumPRO™ Nylon Fish Tapes....... 135
MagnumPRO™ Stainless Steel
Fish Tapes.......................................... 133
Manhole Sheaves for UT2®. ............... 162
Manual-Crank Megohmmeter............. 395
Manual Crimping Tool......................... 205
Manual Communications
Cable Cutter....................................... 195
Manual Hydraulic Quad-Point
Dieless Crimping Tools................. 207-208
Manual Ranging Multimeter................ 370
Manual Stud Punch.............................. 80
MAPP® and Propane Gas.................... 462
Marker-Mate®.................................... 336
Masonry Bits...................................... 109
Masonry Screw Anchors..................... 107
Master Electrician’s Tool Kit.................. 40
Material Handling............................... 409
Measuring Tapes................................ 144
Mechanical Benders........................... 113
Mechanical Benders for EMT, IMC,
Rigid and Aluminum Conduit............... 115
Mechanical Benders for IMC and
Rigid Conduit...................................... 114
Medium Alligator Clips........................ 401
Megohmmeter, 5kV ............................. 394
Mesh Cabinet..................................... 414
Metal Stud Punches.............................. 80
Meter, 600A AC True RMS Clamp........ 380
www.greenlee.com
N
473
INTERNATIONAL
R600 Drain Cleaning Machine............ 464
Ram and Foot Pump Kits...................... 66
Ram and Hand Pump Hydraulic
Driver Kits (Inch and Metric)................. 68
Ram and Hand Pump Kits............... 67, 69
Ratchet ACSR Cable Cutter................. 192
Ratchet Cable Bender......................... 219
Ratchet Cable Cutters......................... 186
Ratchet Communications Cutter......... 195
Ratcheting Wrenches....................... 23-24
Ratchet Pipe Reamer.......................... 460
Ratchet-Type Reel Stand.................... 425
Recessed Light Hole Saws.................... 99
Reciprocating Blades.......................... 101
Rectangular Punches............................ 74
Reel Rollers........................................ 426
Reel Stand Spindles............................ 426
Replacement Blades for the
Punchdown Tool................................. 261
Replacement Draw Studs for
Hydraulic Drivers............................. 76-77
Replacement Draw Studs for
Manual Drivers..................................... 75
Replacement Draw Studs for
Ratchet Drivers..................................... 77
Replacement Draw Studs for
Special Shape Punches........................ 78
Replacement Metal Tips..................... 286
Replacement Piercing Clips................ 281
Replacement Plastic Tips for
200 Series Probes.............................. 286
Retractable Saw................................... 29
RG59/RG6/RG6 Quad Flaring Tool....... 247
RHINO® 1/2” to 4” Threading
Machine............................................. 446
Right-Angle Twin Yoke Sheave............ 160
Rigid Conduit Benders................. 122-124
Ring Removal Tool.............................. 453
ROBEND® 3000.................................. 438
ROCAM® Mobile Cordless
Drain Inspection Camera.................... 463
ROCOOL® Cutting Oil......................... 447
ROCUT® 26TC PEX Cutter................... 458
ROCUT® 32TC PEX Cutter................... 459
ROCUT® Economy Plastic Pipe Shears. 459
ROCUT® Professional PVC Shears....... 459
ROFIRE Hand Torch............................. 461
ROFIRE Swivel Torches....................... 462
ROFLARE®.......................................... 439
ROGRIP® Self-Adjusting
Multi-Purpose Pliers........................... 454
ROLOCK®. .......................................... 454
RONOL® and RONOL SYN®................ 447
Rope Clevis......................................... 171
Rope Stands....................................... 165
Rope-to-Swivel Connectors................ 170
ROPOWER 50R................................... 443
ROPRESS Compact............................. 450
ROPRESS Corded................................ 451
ROPRESS Cordless............................. 451
Satellite Diplexer................................ 253
Satellite TV Splitters............................ 253
Saw Blades........................................ 101
Scratch Awl.......................................... 20
Screw Anchor Expanders for
Caulking Anchors................................ 105
Screwdrivers................................... 11-16
Screwdriver Sets............................. 11-12
Screw-Holding Screwdrivers................. 19
Screw-Type Reel Stands..................... 425
SealTite® 59/6 CATV “F”
Compression Crimper......................... 248
SealTite® BNC Compression
Connectors......................................... 249
SealTite® Cable TV “F”
Compression Connectors.................... 249
SealTite® Cable TV “F”
Compression Tool Kit.......................... 342
SealTite® Pro A/V Kit........................... 342
SealTite® Pro Cable TV “F” Kit............ 342
SealTite® Pro Compression Crimper.... 248
SealTite® RCA Compression
Connectors......................................... 249
Security and Alarm Kit........................ 289
Self-Feeding Spade Bits....................... 86
SensoLITE® Visible/Invisible
Light Detector..................................... 324
Sensors & Scanners........................... 386
Set Screw Clamp Pulling Grips........... 172
Shoe Groups, 555® Accessory ............. 118
Side-Cutting Pliers.................................. 4
Sidekick® 7B...................................... 303
Sidekick® Plus.................................... 302
Sidekick® T&N.................................... 302
Sidekick® T&ND.................................. 303
Sidekick® V.O.C................................... 303
Silicon Optical Power Meter................ 322
Singlemode Fiber Optic Test Set......... 313
Singlemode OTDR,
920XC Handheld . ................................ 314
Single Wavelength 650nm
LED Source......................................... 326
Single Wavelength Laser Sources....... 328
SITE-RITE® Hand Benders................... 113
SITE-RITE® Heat-Treated Aluminum.... 112
SITE-RITE II® Malleable Iron
Hand Benders..................................... 112
Slant-Top Boxes................................. 411
Slip-in Couplings................................ 159
Slug-Buster® Knockout Kits.................. 51
Slug-Buster® Knockout Kit with Ratchet
Wrench................................................. 53
Slug-Buster® Knockout Kit with Ratchet
Wrench - Metric................................... 54
Slug-Buster® Knockout Punches........... 50
Slug-Buster® Knockouts....................... 49
Slug-Buster Manual Knockout Kits........ 51
Slug-Buster® Ram and Foot Pump
Hydraulic Driver Kits............................. 65
Slug-Buster Ratchet Punch Driver Kits.. 52
Slug-Buster SC®................................... 49
Slug-Splitter SC™ Knockouts............... 46
Slug-Splitter SC™ Ram and Hand Pump
Hydraulic Driver Punch Kits.................. 48
Slug-Splitter SC™ Knockout Punches.. 46
Smart Optical Loss Test Set......... 309-310
Smart Quad Bender™ Electric Conduit
Bender for EMT, IMC, Rigid and Rigid
Aluminum........................................... 116
Snagless Modular Plugs..................... 264
SOC............................................. 329-331
Software, MCTAP Waveform
Analysis for TV220.............................. 307
Soldering and Brazing Torches............ 461
CANADA
Padded Tool Belt................................... 38
R
S
USA
P
Quad Bender™ Electric Conduit Bender,
EMT, IMC, and Rigid Aluminum........... 116
Quad-Point Dieless Remote-Powered
Crimping Heads.................................. 207
Quick Change Hole Saw Kit.................. 94
Quick Change Stainless Steel
Hole Cutters.......................................... 91
Quick Connect Extensions..................... 89
Quick Cutter™ Hole Saws.................... 99
Quick Draw®................................... 63-64
Quick Draw 90®.............................. 63-64
Quick Draw® Flex............................ 63-64
Quick Draw® Hydraulic Punch Driver
and Kits................................................ 63
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Oiltight Punches with Notches.............. 72
Omni Marker™.................................. 337
Open Barrel Contact
Pin Crimper................................. 224-225
Open Barrel D-Sub Contact
Pin Crimper........................................ 225
Optical Fiber Monitor.......................... 316
Optical Loss Test Sets......................... 317
Optical Power Meters.................. 320-321
Other Coaxial Connectors................... 250
Q
ROTRAC Tube Cutters......................... 458
Round Cable Cutters........................... 236
RP50-S Precision Test Pump.............. 465
Tel: 800.435.0786
Fax: 800.524.2853
O
PZ 6 ROTO Wire Ferrule Crimper......... 229
Tel: 800.435.0786
Fax: 800.451.2632
Nail Eater® Extreme.............................. 83
Nail Eater® Extreme Impact Bits........... 83
Nail Eater® Extreme Shorty................... 83
Nautilus Range Telephone Test Sets.... 296
NETcat® Micro NC-100....................... 292
NETcat® Pro NC-500.......................... 291
Network Tool Bundle........................... 348
Nipple Chucks.................................... 446
Non-Contact Voltage Detectors.... 361-362
Non-Contact Phase Sequence
Indicator............................................. 395
Non-Contact Self Testing
Voltage Detector................................. 362
Non-Impact Punchdown Tools
with Fixed Blades............................... 260
Non-Insulated Terminal Crimper......... 225
Non-Insulated Wire Ferrules................ 226
Nut Driver Bag...................................... 36
Nut Drivers..................................... 17, 26
Nut Driver Sets.......................... 16-18, 26
Nut Driver Set, 7 Piece .......................... 16
Nut Driver, 2-Piece Holding Driver Set.... 19
Nut Driver, 2-Piece Stubby Set .............. 18
Nylon Cable Protector......................... 163
PairMapper® Wiremap Kit................... 293
Paragon.............................................. 299
PC Cable-Check® PRO........................ 295
PDMM-20 Pocket Multimeter...... 364, 371
PEX Hand Crimper.............................. 453
PEX Medium Handle Crimper.............. 453
Phase Sequence Indicator.................. 396
Phillips Tip Screwdriver........................ 14
Pipe and Drain Inspection Systems .... 463
Pipe Cart............................................ 423
Pipe Freezing...................................... 461
PIPESLICE........................................... 457
Placement Tool..................................... 90
Plastic Conical Anchors....................... 107
Pliers...................................................... 4
Pliers & Pipe Wrenches................ 454-456
Plumber’s 7-piece Repair Kit.............. 463
Plumber Stud Punch............................. 79
PNEUMATIC MINI-COLLINS®............... 442
Pocket Cable Stripper......................... 277
Pocket-Light Flashlight................. 33, 138
Pocket Probe Pick............................... 259
Polarity Cubes.................................... 392
Polyester Measuring Tape
and Dispenser.................................... 144
Poly Line............................................. 143
Polyaramid Measuring/Pulling Tapes... 144
Polypro General Purpose Rope............ 434
PON Optical Loss Test Set................... 308
Portable Blower Power
Fishing System................................... 141
Portable Power Threaders................... 440
Pouch/Belt Combo, 3-Piece.................... 36
Power Benders................................... 438
Power Clamp, 2000A . ......................... 375
Power Drives...................................... 442
Power Finder® Closed Circuit Tracer... 385
Power Finder® Open Circuit Tracer...... 384
PowerPlay™ PT-525.......................... 235
PowerPlay™ PT-540.......................... 234
Power-Return Tape Measure................. 31
Precision Die Heads And Dies............. 441
Precision Tone Generator.................... 304
Precision Tracing Tone Generator........ 284
Premise Service Kit............................ 347
Press Jaws......................................... 452
Press Rings........................................ 452
Press Tools......................................... 450
Production Cutting Machines.............. 449
Professional GX Series Tone
Generators.......................................... 282
Professional Installation Kit................. 353
ProGrip 3-in-1 Fiber
Optic Stripper..................................... 276
ProGrip 5-in-1 Fiber
Optic Stripper..................................... 276
Pro-Plus Wire Stripper........................ 276
ProPunch™ 110 Multi-pair
Punchdown........................................ 259
Protractor with Magnetic Base............ 127
Pro Wire Stripper for NM Cable............... 9
Pro Wire Strippers........................... 8, 238
Pulling Grip Selection Guide .............. 173
Pulser Fault Locator.................... 335, 390
Pump Pliers - 10” and 12”..................... 7
Punchdown Stripper........................... 260
Punchdown Tool................................. 261
Push-On Cable TV “F” Connectors...... 250
PVC, Bending...................................... 128
PVC Bending Accessories................... 130
PVC Cutter for up to 1”................. 30, 130
PVC Cutter for up to 1-1/4”.......... 30, 130
PVC Cutter for up to 2”................. 30, 130
PVC Heating Blankets......................... 128
PVC Heaters Selection Guide.............. 128
PVC Plugs and Plug Set...................... 130
PVC Saws..................................... 29, 103
Index
Mighty Mouser® Blow Gun Kit............. 141
MINI-COLLINS® and
Pneumatic MINI COLLINS®. ................ 442
MINICUT 2000.................................... 456
Mini Magnetic Bubble Level.................. 32
Mini-Magnet Laser Level...................... 32
MINI MAX........................................... 456
Mini Pocket-Light Flashlight......... 33, 138
Mini Screwdriver Set............................ 16
mini-stripax® plus............................... 256
mini-stripax® plus
Replacement Blades........................... 256
Mobile Workbench.............................. 415
Modular Adapters, 4-6-8 ..................... 298
Modular Plug Connectors.................... 264
Modular Plugs.................................... 265
Motor Rotation and Phase Sequence
Indicator Kit........................................ 396
Motor Rotation Indicator..................... 396
Motor Rotation & Phase
Sequence.................................... 395-396
Multi-Cable Cutter................................ 27
Multi-Filter Tone Probe........................ 286
Multi-Pocket Bag, 18” Heavy-Duty.......... 35
Multimeter Accessories................ 371-372
Multimeter Hanging Strap................... 372
Multimeters................................. 363-371
Multimode and Singlemode
Fiber Optic Test Set............................. 313
Multimode Fiber Optic Test Set........... 312
Multimode OTDR,
920XC Handheld . ................................ 314
Multiple Strength Basket-Type Pulling
Grips with Rotating Forged Eye........... 176
Multi-Pocket Bag.................................. 35
Multi-Purpose Installation Tool............ 110
Multi-Tool, 6-in-1.................................. 15
Multi-Tool, 9-in-1.................................. 15
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Index
MADE FOR THE TRADE!™
474
Sound Level Meter.............................. 398
Spade Bits............................................ 86
Special Application Punches................. 72
Specialty Testers................................. 398
Speed Booster.................................... 158
Speed Drive Screwdriver...................... 14
SpeedFlex® Flexible Fish Tape Leader. 135
Splicer’s Test Set................................ 300
Split Mesh Rod Closing Basket-Type
Slack Pulling Grips.............................. 176
Square and Special Square Punches.... 73
Square-Recess Tip Drivers.................... 18
Square-Recess Tip Driver Set, 4 Piece . . 18
Standard Knockout Punch Kits.............. 58
Standard Round
Knockout Punches........................... 56-57
Standard Round Manual
Industrial Punch Kit............................... 59
Standard Round Manual
Knockout Punch Kits............................. 58
Standard Round Manual
Knockout Punch Kits - Metric............... 60
Starter Electrician’s Tool Kit.................. 42
Station Master™ Pro.......................... 391
Steel Fish Tapes.................................. 132
Steel Hole Cutters................................. 91
Steel Pipe Cutters............................... 458
Step Bits............................................... 82
Storage............................................... 409
Straight Claw Hammer......................... 34
stripax® Pro 6 & Pro 16...................... 255
Strippers, LC CST................................. 243
Stripping/Crimping
Combination Tool.......................... 10, 258
Structural Stud Punch........................... 79
Structured Wiring Testers.................... 291
Stubby, Nut Driver Set.......................... 18
Stubby Auger Wood Bits....................... 84
Stubby, Screwdriver Set........................ 13
Stubby Square-Recess Tip Driver.......... 19
Stud Punches....................................... 79
Stud Sensor with AC Detection........... 386
SUPER CUT Deluxe Threading Kit........ 439
SUPER CUT Rachet Threader.............. 439
SUPERJACK Pipe Stands..................... 448
SUPERTRONIC 2SE............................. 443
SUPERTRONIC 2SE/ROPOWER 50R..... 443
SUPERTRONIC 4SE............................. 444
SUPERTRONIC 1250 Portable
Compact Threader.............................. 440
SUPERTRONIC 2000 Economy
Power Threader.................................. 440
Super Tugger® Cable Puller................. 154
Sure-Grip Test Leads.......................... 402
SurePunch® Pro Punchdown Tool....... 257
Sure Signal®. ..................................... 294
SureStrip® 4.0.................................... 255
Surface Temperature Probe................ 398
Swabs, Brushes, Mandrels & Swivels. 169
SWEATBOX™ II.................................. 462
Swivels............................................... 171
T
TAPCON® Masonry Fasteners
and Drill Bits....................................... 109
Tape Measures and Levels................... 31
T-Basket-Type Pulling Grips................ 175
T-Bug® Digital Signal Identifier........... 305
Telco Technician Tool Kit..................... 344
Telecom Field Technician Kit............... 354
Telecom Splice Crimpers.................... 262
Telecom Technician Kit....................... 353
Tele-Mate® Communication Test Set... 297
Telephone Ratchet Crimper................. 262
Telephone Test Sets............................ 297
TelScout® TS90................................... 306
TelScout® TS100................................. 305
Temperature....................................... 397
Terminal Crimping Tool............... 223, 272
Testing & Measurement...................... 357
Test Lead Kit....................................... 400
Test Pumps......................................... 465
Thermocouple Adapter........................ 402
Threaded Rod Cutter........................... 429
Threading Accessories........................ 447
Throwmaster®............................. 299-300
Toggle Bolts and Spring Wings............ 108
Tone and Probe Carrying Case............ 290
Tone and Probe Plus Cable-Check™.. 289
Tone Generators.......................... 281-282
Tone Probe Amplifiers......................... 285
Tone Probes................................. 285-287
Tone Ranger....................................... 299
Tone Test Set...................................... 283
Tool Bags.............................................. 34
Tool Belt............................................... 38
Tool Caddy, 20-Pocket ........................... 37
Tool Carrier, 11” Cordura® Open ............ 35
Tool Carrier, 16” with Parts Bin . .......... 35
Tool Kits................................................ 40
Top Screw Cam Lock Vice.................. 448
Torch Reflector................................... 462
Torpedo Level....................................... 32
Touchless AC Voltage Indicator........... 361
Tracker II.................................... 334, 389
Tray-Type Sheaves............................. 164
Tri-Bench with 6” Chain Vise.............. 448
Triple Sheave Cable Guide.................. 161
TRMS Digital Multimeter............. 368, 369
True RMS Clamp Meter....................... 381
True RMS Clamp Meter, 1000A AC .... 378
True RMS Clamp Meter, 1000A AC/DC .377
True RMS Clamp Meter, 600A AC ...... 380
True RMS Clamp Meter, 600A AC/DC ... 379
Tube Bender Maxi............................... 438
Tube Cutter 30/50.............................. 457
Tube Cutters....................................... 456
Tube Cutter, 35 PRO / 42 PRO ............. 456
Tugger Accessories............................. 158
Tugger® and Super Tugger®. .............. 162
TurTEL Modular Adapters/Polarity
Tester................................................. 298
Twisted Pair Stripper........................... 244
Twist-On Cable TV “F” Connectors...... 250
Two-Hand Ratchet Cable Cutter.......... 185
U
UG5 Ultra GLIDER™ Cable Pulling
Lubrication System............................. 147
Ultimate Coax Compression Tool Kit.... 340
Ultimate DataReady® Pro Kit............... 340
Ultimate Data/Voice Pro Kit................. 341
Ultimate Fiber Tool Kit......................... 355
Ultimate Premise Service Kit............... 339
Ultimate Technician Kit....................... 339
Ultimate Tool Bag................................ 341
Ultra Cable Feeder™.......................... 146
Ultra Cutters......................................... 93
Ultra Feeder........................................ 146
Ultra Tugger® 2 Cable Puller............... 156
Ultra Tugger® 4 Cable Puller............... 155
Ultra Tugger® 5 Cable Puller............... 152
Ultra Tugger® 8 Cable Puller............... 152
Ultra Tuggers...................................... 148
Ultra Tugger® Screw-on Couplings...... 159
Ultra Tugger® Speed Booster.............. 158
Uni Marker™..................................... 337
Universal Internal/External
Deburring Tools.................................. 460
Universal Slitter.................................. 245
Untwist Tool........................................ 259
USA Authorized Service Centers......... 466
Utility Cabinets................................... 413
Utility Dieless Crimping Tool................ 209
Utility Knife........................................... 28
V
Vises And Stands................................ 448
Visual Fault Finder.............................. 312
V-Notch Wire Stripper/Cutter................... 8
Voltage Detectors......................... 359, 407
Voltage Detectors,
Non-Contact..........................361-362, 407
Voice and Category 5
Data Termination Kit........................... 352
VS1 Series Splitters............................ 254
W
Water Pump Pliers.............................. 454
Welder’s Boxes................................... 415
Winter-Gel™...................................... 167
Winter-Gel™ Cable Pulling Lubricant. 168
Wire and Cable Handling.................... 418
Wire and Cable Pulling Grips................. 90
Wire and Cable Stripping Tools........... 220
Wire and Valve Locator............... 336, 391
Wire & Cable Identification.................. 281
Wire & Cable Termination................... 177
Wire Caddy, 6-Spindle ......................... 419
Wire Cart............................................ 422
Wire Crimping Tools............................ 221
Wire Dispenser................................... 420
Wire Duct Brush................................. 170
Wire Ferrule Crimpers......................... 229
Wire Ferrule Crimping Tools......... 229-231
Wire Finder/Mini Locator............. 335, 390
Wiremap Tester.................................. 294
Wire Reacher, 3’ .................................. 137
Wire Reel Support Frame.................... 419
Wire Strippers...................................... 8-9
Wire Stripper/Cutters.............................. 8
Wire Strippers/Cutter.......................... 238
Wrenches............................................. 21
X
XFC Series Weatherproof Compression
F-Style Connectors............................. 251
Xpert Tone and Probe Kit.................... 287
Z
Zinc Mushroom Head Drive Anchors... 106
Zipper Bag, 12” Canvas.......................... 39
www.greenlee.com
Alfanumeric Index by Catalog/UPC Number
A
B
BC14.................................................... 429
BC18.................................................... 429
BC24.................................................... 429
BC30.................................................... 429
BC36.................................................... 429
BLL-200.............................. 334, 388-389
C
D
E
CANADA
INTERNATIONAL
475
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
E12CCXL............. 178-179, 181, 196, 216
E12CCXL11.......................................... 179
E12CCXL12.......................................... 179
E12CCXL22.......................................... 179
E12CCXL120........................................ 179
E12CCXL230........................................ 179
E-239.......................................... 445-446
EAC18120............................................ 214
EAC18230............................................ 214
ECCXL......... 178-179, 181, 196, 215, 217
ECCXL11.............................................. 179
ECCXL12.............................................. 179
ECCXL22.............................................. 179
ECCXL120............................................ 179
ECCXL230............................................ 179
EK06ATCL11......................................... 206
EK06ATCL12......................................... 206
EK06ATCL22......................................... 206
EK06ATCL120....................................... 206
EK06ATCL230....................................... 206
EK06ATL11........................................... 206
EK06ATL12........................................... 206
EK06ATL22........................................... 206
EK06ATL120......................................... 206
EK06ATL230......................................... 206
EK06FTL............................................... 196
EK06FTL11........................................... 206
EK06FTL12........................................... 206
EK06FTL22........................................... 206
EK06FTL120......................................... 206
EK06FTL230......................................... 206
EK12IDL............................................... 206
EK12IDL11........................................... 208
EK12IDL12........................................... 208
EK12IDL22........................................... 208
EK12IDL120......................................... 208
EK12IDL230......................................... 208
EK22GL....................... 214-215, 217-218
EK210L11............................................. 221
EK210L12............................................. 221
EK210L22............................................. 221
EK210L120........................................... 221
EK210L230........................................... 221
EK410L................................................. 196
EK410L11............................................. 197
EK410L12............................................. 197
EK410L22............................................. 197
EK410L120........................................... 197
EK410L230........................................... 197
EK622L................................................. 196
EK622L11............................................. 199
EK622L12............................................. 199
EK622L22............................................. 199
EK622L120........................................... 199
EK622L230........................................... 199
EK628L....................................... 196, 215
EK628L11............................................. 198
EK628L12............................................. 198
EK628L22............................................. 198
EK628L120........................................... 198
EK628L230........................................... 198
EK1230L............................................... 196
EK1230L11........................................... 200
EK1230L12........................................... 200
EK1230L22........................................... 200
EK1230L120......................................... 200
EK1230L230......................................... 200
EK1240CL11........................................ 200
EK1240CL12........................................ 200
EK1240CL22........................................ 200
EK1240CL120...................................... 200
EK1240CL230...................................... 200
EK1240KL11......................................... 200
EK1240KL12......................................... 200
EK1240KL22......................................... 200
EK1240KL120....................................... 200
EK1240L............................................... 196
EK1240L11........................................... 200
EK1240L12........................................... 200
EK1240L22........................................... 200
EK1240L120......................................... 200
EK1240L230......................................... 200
EK1550................................................ 196
EK1550L120......................................... 203
EK1550L230......................................... 203
EK21011.............................................. 272
EK21012.............................................. 272
EK21022.............................................. 272
EK155011............................................ 203
EK155012............................................ 203
EK155022............................................ 203
EKO6ATL............................................... 196
EML100................................................ 336
ES25.................................................... 190
ES32FL11............................................. 182
ES32FL12............................................. 182
ES32FL22............................................. 182
ES32FL120........................................... 182
ES32FL230........................................... 182
ES32L................................................... 181
ES32L11............................................... 182
ES32L12............................................... 182
ES32L22............................................... 182
ES32L120............................................. 182
ES32L230............................................. 182
ES750........................................ 181, 183
ES750-11............................................. 183
ES750-22............................................. 183
ES2511................................................ 190
ES2522................................................ 190
ES100011............................................ 183
ES100022............................................ 183
ESC85L................................................ 181
ESC85L11............................................ 194
ESC85L12............................................ 194
ESC85L22............................................ 194
ESC85L120.......................................... 194
ESC85L230.......................................... 194
ESC10511............................................ 194
ESC10512............................................ 194
ESC10522............................................ 194
ESG45EF.............................................. 191
ESG45ESI............................................. 191
ESG45L................................................ 190
ESG45L11............................................ 191
ESG45L12............................................ 191
ESG45L22............................................ 191
ESG45L120.......................................... 191
ESG45L230.......................................... 191
ESG50L................................................ 181
Tel: 800.435.0786
Fax: 800.524.2853
DBITKIT.................................................. 88
DM-20.......................................... 406-407
DM-40.......................................... 406-407
DM-60.......................................... 406-407
DM-200................................................ 406
DM-200A............................ 363, 367, 406
DM-200A-C.......................................... 367
DM-200 Series..................................... 407
DM-210...................................... 364, 406
DM-210A............................ 363, 367, 406
DM-210A-C.......................................... 367
DM-300...................................... 364, 369
DM-300-C............................................ 369
DM-300 Series..................................... 407
DM-310.............................. 364, 369, 406
DM-310-C............................................ 369
DM-330.............................. 364, 368, 406
DM-330-C............................................ 368
DM-350.............................. 364, 368, 406
DM-350-C............................................ 368
DM-500................................................ 406
DM-500 Series..................................... 407
DM-510................................................ 406
DM-510A............................ 363, 367, 406
DM-510A-C.......................................... 367
DM-800....................................... 354, 406
DM-800 Series..................................... 407
DM-810................................................ 406
DM-810A............................ 363, 366, 406
DM-810A-C.......................................... 366
DM-820................................................ 406
DM-820A............................ 363, 366, 406
DM-820A-C.......................................... 366
DM-830A............................ 363, 366, 406
DM-830A-C.......................................... 366
DM-860.............................. 363, 365, 406
DM-860-C............................................ 365
DMHS-1............................................... 372
DML-54................................................ 406
DML-430.............................................. 406
DML-430A.......................... 363, 365, 406
DML-430A-C........................................ 365
DML Series........................................... 407
DMSC-2................................................ 406
DMSC-2U................................... 371, 406
DMSC-9...................................... 371, 406
DMSC-9U................................... 371, 406
DTAP1/4-20............................................ 81
DTAP3/8-16............................................ 81
DTAP5/16-18.......................................... 81
DTAP6-32............................................... 81
DTAP8-32............................................... 81
DTAP10-24............................................. 81
DTAP10-32............................................. 81
DTAP12-24............................................. 81
DTAPKIT.................................................. 81
DTAPKITM............................................... 81
DTAPM3C............................................... 81
DTAPM4C............................................... 81
DTAPM5C............................................... 81
DTAPM6C............................................... 81
DTAPM8C............................................... 81
DTAPM10C............................................. 81
Tel: 800.435.0786
Fax: 800.451.2632
C12CCX................................................ 216
CH1............................................ 335, 390
CH2............................................ 335, 390
CJD3.................................................... 198
CJK...................................................... 198
CLR-1................................................... 169
CLR-5................................................... 169
CLR-Q................................................... 169
CM-330.............................. 374, 382, 407
CM-400................................................ 382
CM-410................................................ 407
CM-450...................................... 381, 407
CM-600...................................... 374, 381
CM-600-C............................................ 381
CM-600 Series..................................... 407
CM-800...................................... 374, 380
CM-800-C............................................ 380
CM-800 Series..................................... 407
CM-850...................................... 374, 380
CM-850-C............................................ 380
CM-900...................................... 374, 379
CM-900-C............................................ 379
CM-900 Series..................................... 407
CM-950...................................... 374, 379
CM-950-C............................................ 379
CM-1300.................................... 373, 378
CM-1300-C.......................................... 378
CM-1300 Series................................... 407
CM-1350.................................... 373, 378
CM-1350-C.......................................... 378
CM-1500.................................... 373, 377
CM-1500-C.......................................... 377
CM-1500 Series................................... 407
CM-1550.................................... 373, 377
CM-1550-C.......................................... 377
CMA-40...................................... 372, 407
CMA-60...................................... 372, 407
CMAF-3000.......................................... 372
CMAF-3000-C...................................... 372
CMAF Series......................................... 407
CMGRT-100................................ 373, 375
CMGRT-100-C...................................... 375
CMI-100............................. 373, 376, 407
CMI-100-C........................................... 376
CMI-200............................. 373, 376, 407
CMI-200-C........................................... 376
CMP-200............................ 373, 375, 407
CMP-200-C.......................................... 375
CMT-80.............. 359, 361, 374, 406, 407
CMT-90...................... 359, 361, 374, 407
CR25.................................................... 163
CRM-1.................................................. 168
CRM-5.................................................. 168
CRM-Q................................................. 168
CS9...................................................... 288
CS14........................................... 335, 390
CS15........................................... 335, 390
CS16........................................... 334, 389
CS19.................................................... 288
CS-2072....................................... 383, 385
CS-2072K..................................... 383, 385
CS-8000 Circuit Seeker™ . .......................
Circuit Tracer............................... 383-384
CSI0..................................................... 294
CSJ-100.............................. 360, 406-407
CST Pro Coax Stripper.......................... 242
CST Strippers....................................... 241
CST vario Stripper................................ 241
Index
AC-ADPT-20-UNIV....................... 314-315
AC-CONN-FC-L2.......................... 314-315
AC-CONN-SC-L2.......................... 314-315
AC-CONN-ST-L2.......................... 314-315
AD-108................................................. 329
AE2-10................................................. 329
AE 22/120............................................ 226
AE 22/150............................................ 226
AE 22/185............................................ 226
AF2............................................. 335, 390
AHP-10................................................. 329
AM-6.................................. 364, 371, 406
AM 25 Slitter........................................ 245
AM 35 Slitter........................................ 245
AMS-00................................................ 329
AMT-10................................................ 329
APC-108............................................... 329
ASC-108............................................... 330
ASM-90................................................ 330
AT8..................................... 282, 351, 353
AT8K..................................................... 287
AT8L..................................................... 283
AT8LK................................................... 288
ATS-108............................................... 330
AU-250................................................. 329
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Index
MADE FOR THE TRADE!™
476
ESG50L11............................................ 184
ESG50L12............................................ 184
ESG50L22............................................ 184
ESG50L120.......................................... 184
ESG50L230.......................................... 184
ESP710-11............................................. 79
ESP710-12............................................. 79
ESP710-22............................................. 79
ETS8L11............................................... 189
ETS8L12............................................... 189
ETS8L22............................................... 189
ETS8L120............................................. 189
ETS8L230............................................. 189
ETS12L11............................................. 188
ETS12L12............................................. 188
ETS12L22............................................. 188
ETS12L120........................................... 188
ETS12L230........................................... 188
F
FL2AAF................................................... 33
FOTP-171A........................................... 333
FP3....................................................... 137
FP12..................................................... 137
FP18..................................................... 137
FP24..................................................... 137
FS439-100........................................... 133
FTF540-50........................................... 134
FTF540-100......................................... 134
FTFS439-50......................................... 133
FTFS439-100....................................... 133
FTN536-50........................................... 135
FTN536-100......................................... 135
FTS438-65........................................... 132
FTS438-65BP....................................... 132
FTS438-125......................................... 132
FTS438-125BP..................................... 132
FTS438-240......................................... 132
FTS438-240BP..................................... 132
FTS438W-100...................................... 132
FTSS438-100....................................... 133
FTSS438-200....................................... 133
G
GEL-1................................................... 168
GEL-5................................................... 168
GEL-Q................................................... 168
Ge MT-RJ............................................. 321
GS1............................................ 336, 391
GT-10................................................... 392
GT-10GFI.............................................. 392
GT-11................................................... 359
GT-12......................................... 359, 362
GT-15......................................... 359, 362
GT-16......................................... 359, 362
GT-65 Voltage Tester................... 359, 407
GT-95 Voltage Tester................... 359, 407
GT-220....................................... 359, 407
GT-540................................ 359-360, 407
H
H88953................................................ 463
HDBC24................................................ 428
HDBC30................................................ 428
HDBC36................................................ 428
HDBC42................................................ 428
HDFBC18.............................................. 428
HDFBC24.............................................. 428
HDFBC30.............................................. 428
HDFBC36.............................................. 428
HE.9055................................................. 79
HK06AT...................................... 196, 207
HK06FT...................................... 196, 207
HK12ID............................... 196, 208, 214
HK520........................................ 190, 191
HK1230...................................... 196, 201
HK1230C.............................................. 201
HK1240...................................... 196, 201
HK1240C.............................................. 201
HKL1232.................................... 196, 201
HS1............................................ 336, 391
I
IC1............................................. 334, 389
K
K05-1GL..................................... 196, 205
K05-1SPGL................................. 196, 205
K09-2.5SPGL........................................ 196
K09-2GL..................................... 196, 205
K09-2SPGL........................................... 205
K09-3GL..................................... 196, 205
K22S1GL.............................................. 198
K29GL................................. 226-227, 231
K111.......................................... 196, 204
K210............................................ 11, 223
K425BG.............................. 196, 205, 215
K425K58.............................................. 205
K425KO................................................ 205
K425O................................ 196, 205, 215
KA4...................................................... 215
KA4-1................................................... 210
KA4-1/0................................................ 210
KA4-2................................................... 210
KA4-2/0................................................ 210
KA4-4................................................... 210
KA4-6................................................... 210
KA4-8................................................... 210
KA4AL.................................................. 210
KA12-1................................................. 212
KA12-1/0.................................... 212, 217
KA12-2....................................... 212, 217
KA12-2/0.................................... 212, 217
KA12-3/0.................................... 212, 217
KA12-4....................................... 212, 217
KA12-4/0.................................... 212, 217
KA12-6....................................... 212, 217
KA12-8....................................... 212, 217
KA12-250................................... 212, 217
KA12-300................................... 212, 217
KA12-350................................... 212, 217
KA12-400................................... 212, 217
KA12-500................................... 212, 217
KA12-600................................... 212, 217
KA12-750................................... 212, 217
KA22.................................................... 215
KA22-1....................................... 211, 217
KA22-1/0.................................... 211, 217
KA22-2....................................... 211, 217
KA22-2/0.................................... 211, 217
KA22-3/0.................................... 211, 217
KA22-4....................................... 211, 217
KA22-4/0.................................... 211, 217
KA22-6....................................... 211, 217
KA22-8....................................... 211, 217
KA22-250................................... 211, 217
KA22-300................................... 211, 217
KA22-350................................... 211, 217
KC4...................................................... 215
KC4CU.................................................. 210
KC12.................................................... 215
KC12-1....................................... 212, 216
KC12-1/0.................................... 212, 216
KC12-2....................................... 212, 216
KC12-2/0.................................... 212, 216
KC12-3/0.................................... 212, 216
KC12-4....................................... 212, 216
KC12-4/0.................................... 212, 216
KC12-6....................................... 212, 216
KC12-8....................................... 212, 216
KC12-250................................... 212, 216
KC12-300............................................. 216
KC12-350................................... 212, 216
KC12-400................................... 212, 216
KC12-500................................... 212, 216
KC12-600................................... 212, 216
KC12-750................................... 212, 216
KC22.................................................... 215
KC22-1....................................... 211, 215
KC22-1/0.................................... 211, 215
KC22-2....................................... 211, 215
KC22-2/0.................................... 211, 215
KC22-3/0.................................... 211, 215
KC22-4....................................... 211, 215
KC22-4/0.................................... 211, 215
KC22-6....................................... 211, 215
KC22-8....................................... 211, 215
KC22-250................................... 211, 215
KC22-300................................... 211, 215
KC22-350................................... 211, 215
KC22-400................................... 211, 215
KC22-500................................... 211, 215
KC22-600............................................. 215
KC22-600B........................................... 211
KD4-10................................................. 210
KD4-840............................................... 210
KD6...................................................... 215
KD6-10....................................... 211, 218
KD6-11....................................... 211, 218
KD6-12....................................... 211, 218
KD6-13................................................. 211
KD6-14................................................. 211
KD6-15....................................... 211, 218
KD6-16................................................. 211
KD6-17................................................. 211
KD6-18................................................. 211
KD6-19................................................. 211
KD6-20................................................. 211
KD6-21................................................. 211
KD6-22................................................. 211
KD6-24................................................. 211
KD6-25................................................. 211
KD6-27................................................. 190
KD6-27 Cutter Dies.............................. 193
KD06AL................................................ 198
KD12.................................................... 215
KD12-10..................................... 212, 218
KD12-11..................................... 212, 218
KD12-12..................................... 212, 218
KD12-14............................................... 212
KD12-15..................................... 212, 218
KD12-16............................................... 212
KD12-17............................................... 212
KD12-18............................................... 212
KD12-19............................................... 212
KD12-20............................................... 212
KD12-30..................................... 212, 218
KD12-31............................................... 212
KD12-32............................................... 212
KD12-33............................................... 212
KD12-35..................................... 212, 218
KD12-36............................................... 212
KD12-37............................................... 212
KD12-38............................................... 212
KD12AL................................................ 212
KD12CU................................................ 212
KK35SGL.............................................. 272
KP1022........................................ 11, 223
KP1022D...................................... 11, 223
L
L77............................................... 32, 126
L97............................................... 32, 126
L107............................................. 32, 126
LE 300.................................................. 109
LE 310.................................................. 109
LE 320.................................................. 109
LE 405.................................................. 109
LE 415.................................................. 109
LE 425.................................................. 109
LE 435.................................................. 109
LE 445.................................................. 109
LE 455.................................................. 109
LP 100.................................................. 110
LS60LA11............................................... 61
LS60LA12............................................... 61
LS60LA22............................................... 61
LS60LA120............................................. 61
LS60LA230............................................. 61
LS60LB120............................................. 61
LS60LB230............................................. 61
LS60L..................................................... 61
LS60LA11............................................... 62
LS60LA12............................................... 62
LS60LA22............................................... 62
LS60LB11........................................ 61-62
LS60LB12........................................ 61-62
LS60LB22........................................ 61-62
LT-100........................................ 399, 407
M
MA4..................................................... 214
MA12ID................................................ 214
MA22................................................... 214
MA50................................................... 214
MA120................................................. 214
MCTAP.................................................. 307
MKESP710GL......................................... 79
MKLS60.................................................. 62
MM 50/125.......................................... 319
N
NC-100................................................. 292
NC-500................................................. 291
NC-510................................................. 291
O
O4686.................................................... 56
OFM130............................................... 316
OFM1020............................................. 316
OFM1020-85M10................................. 316
P
P00551C.............................................. 446
P20023................................................ 462
P70045C.............................................. 458
P70060C.............................................. 458
P70159C.............................................. 455
P70160C.............................................. 455
P70161C.............................................. 455
P70162C.............................................. 455
P70849C.............................................. 441
P70850C.............................................. 441
P70905C.............................................. 439
P70912C.............................................. 441
P70913C.............................................. 441
P70915C.............................................. 441
P71259C.............................................. 440
PA1113................................................. 255
PA1115P............................................... 256
PA1116........ 240, 338-341, 344-347, 348
PA1117................................................. 239
PA1118................................................. 239
PA1119................ 240, 340, 342-343, 348
PA1123................................................. 239
PA1161....................................... 256, 355
PA1162....................................... 277, 355
PA1171................................ 276, 355-356
PA1175................................................. 236
PA1176................................................. 224
PA1177................................................. 276
PA1178................................................. 262
PA1179................................................. 236
PA1180................................................. 262
PA1181................................................. 239
PA1240................................................. 241
PA1241................................................. 241
PA1243................................................. 241
www.greenlee.com
CANADA
INTERNATIONAL
477
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
PA4560................................................. 259
PA4561................................................. 259
PA4562................................................. 259
PA4563................................................. 259
PA4571............... 258, 338, 340, 344, 346
PA4572....................... 258, 339, 341, 347
PA4573....................... 258, 339, 341, 347
PA4574....................................... 258, 339
PA4575....................................... 258, 339
PA4591........................ 258, 339-341, 346
PA4599........ 257, 338-340, 344, 346-347
PA4906................................................. 342
PA4908................................................. 345
PA4909................................................. 348
PA4910................................................. 342
PA4915................................................. 342
PA4918................................................. 348
PA4919................................................. 345
PA4923........................ 339-341, 344, 355
PA4924................................................. 355
PA4929................................................. 347
PA4932................................................. 339
PA4933................................................. 339
PA4934................................................. 340
PA4935................................................. 341
PA4938................................................. 344
PA4939................................................. 340
PA4940....................................... 338, 344
PA4941................................................. 338
PA4942................................................. 338
PA4943................................................. 338
PA4945....................................... 234, 338
PA4946................................................. 338
PA6000................................................. 349
PA6001................................................. 349
PA6500....................................... 235, 345
PA6501................................................. 235
PA6502................................................. 235
PA6503................................................. 235
PA6504................................................. 235
PA6505................................................. 235
PA6506................................................. 235
PA6507................................................. 235
PA6508................................................. 235
PA6509................................................. 235
PA6510................................................. 235
PA6511................................................. 235
PA6512................................................. 235
PA6514....................................... 235, 258
PA6515....................................... 235, 258
PA6516................................................. 235
PA6518................................................. 235
PA6519-3............................................. 235
PA6520....................................... 234, 338
PA6524................................................. 235
PA8000................ 266, 339-340, 346-347
PA8001................................................. 267
PA8002................................................. 267
PA8003................................................. 267
PA8004................................................. 267
PA8005................................................. 267
PA8006................................................. 267
PA8007................................................. 267
PA8008................................................. 267
PA8009................................................. 267
PA8010................................................. 267
PA8011................................................. 267
PA8012................................................. 267
PA8013................................................. 267
PA8014................................................. 267
PA8015................................................. 267
PA8016................................................. 267
PA8021................................................. 269
PA8022................................................. 269
PA8023................................................. 269
PA8024................................................. 269
Tel: 800.435.0786
Fax: 800.524.2853
PA2263................................................. 243
PA2280........................ 242, 340, 343-344
PA2281............................... 242, 340, 344
PA2282........................ 242, 340, 343-344
PA2283............................... 242, 340, 343
PA2284............................... 242, 340, 343
PA2303................................................. 266
PA2306................................................. 266
PA2307................................................. 270
PA2530................................................. 263
PA2648................................................. 267
PA2649....................................... 267, 343
PA2653....................................... 267, 343
PA2656................................................. 267
PA2657................................................. 267
PA2660....................................... 270, 344
PA2661....................................... 270, 344
PA2662....................................... 270, 344
PA2663....................................... 270, 344
PA2664....................................... 355, 356
PA2668....................................... 355, 356
PA2670................................................. 268
PA2671................................................. 268
PA2672................................................. 268
PA2673................................................. 268
PA2674................................................. 268
PA2681....................................... 229, 271
PA2683................................................. 270
PA2687............................... 268, 339, 347
PA2699................................................. 267
PA2712................................................. 275
PA3240................................................. 241
PA3242................................................. 241
PA3526................................................. 258
PA3527................................................. 258
PA3528................................................. 258
PA3532................................................. 258
PA3535................................................. 258
PA3536................................................. 258
PA3560................................................. 259
PA3561................................................. 259
PA3570........................ 258, 338, 344-346
PA3571................................................. 258
PA3572................................................. 258
PA3573................................................. 258
PA3574................................................. 258
PA3575................................................. 258
PA3576................................................. 258
PA3579................................................. 258
PA3580................................ 260, 347-348
PA3581................................................. 260
PA3582................................................. 260
PA3584................................................. 257
PA3585................................................. 257
PA3586................................................. 257
PA3587................................................. 257
PA3588................................................. 257
PA3589................ 257, 338-341, 346-347
PA3590................................................. 257
PA3591................................................. 257
PA3592................................................. 257
PA3593................................................. 257
PA3594................................................. 257
PA3595................................................. 257
PA3596................................................. 257
PA3597................................................. 257
PA3598................................................. 257
PA3599................................................. 257
PA4336................................................. 349
PA4370................................................. 349
PA4527................................................. 258
PA4528....................................... 258, 345
PA4529................................................. 258
PA4530................................................. 258
PA4531................................................. 258
PA4535................................................. 258
Tel: 800.435.0786
Fax: 800.451.2632
PA1670....................................... 224, 271
PA1700................................................. 275
PA1780....................................... 298, 344
PA1785................................................. 298
PA1820....................................... 245, 355
PA1821....................... 245, 340, 343, 355
PA1822....................................... 245, 356
PA1828-1............................................. 275
PA1873................................................. 275
PA1900............................... 260, 339, 341
PA1902....................... 298, 339, 344, 347
PA1903....................................... 298, 344
PA1904................................................. 298
PA1907....................................... 247, 340
PA1908....................................... 247, 340
PA1913................................................. 260
PA1915................................................. 259
PA1916................................................. 247
PA1917....................................... 247, 342
PA1920-1................................... 279, 355
PA1922-1................................... 278, 355
PA1923........................ 259, 339-341, 347
PA1925................................................. 350
PA1926-1................................... 279, 355
PA1927............... 246, 339, 340, 342, 343
PA1928................................................. 247
PA1930................................................. 247
PA1931............................... 237, 338, 345
PA1933....................................... 237, 344
PA2003....................................... 270, 344
PA2005....................................... 270, 344
PA2019................................................. 270
PA2029................................................. 269
PA2031................................................. 269
PA2032................................................. 268
PA2033................................................. 269
PA2034....................................... 267, 343
PA2035................................................. 269
PA2039................................................. 267
PA2040................................................. 269
PA2042................................................. 267
PA2044........................................ 355-356
PA2045................................................. 267
PA2046................................................. 267
PA2047................................................. 267
PA2050................................................. 267
PA2051................................................. 267
PA2061............................... 268, 340, 346
PA2062................ 268, 339-340, 346-347
PA2063............................... 268, 340, 346
PA2064............................... 268, 340, 346
PA2065................................................. 268
PA2067............................... 268, 340, 346
PA2068................................................. 268
PA2075....................................... 267, 343
PA2076................................................. 267
PA2082................................................. 267
PA2095................................................. 269
PA2096................................................. 269
PA2097................................................. 269
PA2108................................................. 256
PA2109................................................. 245
PA2113................................................. 255
PA2119................................................. 240
PA2120................................................. 240
PA2140................................................. 256
PA2141................................................. 256
PA2142................................................. 256
PA2143................................................. 256
PA2144................................................. 256
PA2240................................................. 241
PA2241................................................. 241
PA2243................................................. 241
PA2245................................................. 241
PA2247................................................. 241
PA2248................................................. 241
Index
PA1247................................................. 241
PA1248................................................. 241
PA1250................................................. 241
PA1255....................................... 243, 343
PA1256................................................. 243
PA1257....................... 243, 339, 342, 346
PA1258....................................... 243, 355
PA1280....................... 242, 340, 343, 344
PA1281................................................. 242
PA1282................................................. 242
PA1283................................................. 242
PA1285................................................. 242
PA1302....................................... 266, 343
PA1305................................................. 269
PA1306................................................. 269
PA1307................................................. 268
PA1308................................................. 269
PA1317................................................. 267
PA1319................................................. 267
PA1322................................................. 269
PA1328................................................. 267
PA1334................................................. 269
PA1335................................................. 267
PA1336................................................. 267
PA1337................................................. 267
PA1338................................................. 267
PA1340................................................. 268
PA1342................................................. 268
PA1344................................................. 268
PA1345................................................. 268
PA1347................................................. 267
PA1348................................................. 267
PA1349................................................. 267
PA1356................................................. 267
PA1359................................................. 269
PA1360................................................. 269
PA1363................................................. 267
PA1365................................................. 267
PA1366................................................. 267
PA1367................................................. 267
PA1368................................................. 267
PA1373................................................. 268
PA1387................................................. 268
PA1389................................................. 267
PA1460................................................. 225
PA1461................................................. 225
PA1462................................................. 225
PA1511................................ 277, 355-356
PA1530R.............................................. 263
PA1540................................................. 263
PA1543........ 293, 339-340, 344, 346-347
PA1555........................ 339-340, 342-343
PA1556........................ 339, 341, 346-348
PA1559................................................. 248
PA1561................................ 263, 344-345
PA1565................................................. 344
PA1573............... 289, 339, 341, 344, 347
PA1574................................................. 295
PA1576....................................... 294, 346
PA1577................................................. 295
PA1578................................................. 343
PA1594....................................... 295, 340
PA1600........................ 270, 344, 355-356
PA1605................................................. 271
PA1611................................................. 270
PA1612................................................. 270
PA1616................................................. 270
PA1617................................................. 270
PA1618....................................... 225, 271
PA1631....................................... 225, 271
PA1645....................................... 224, 271
PA1646....................................... 225, 271
PA1647....................................... 229, 271
PA1648....................................... 229, 271
PA1649................................................. 230
PA1669................................................. 270
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Index
MADE FOR THE TRADE!™
478
PA8025................................................. 269
PA8026................................................. 269
PA8027................................................. 269
PA8029................................................. 269
PA8030................................................. 268
PA8031................................................. 268
PA8032................................................. 268
PA8034................................................. 268
PA8035................................................. 268
PA8036................................................. 268
PA8041................................................. 268
PA8042................................................. 268
PA8044................................................. 268
PA8045................................................. 268
PA8049................................................. 267
PA9520....................... 264, 339, 345, 348
PA9521................................................. 264
PA9546............................... 264, 339, 348
PA9549................................................. 264
PA9588................................................. 264
PA9610................................................. 249
PA9611................................................. 249
PA9612................................................. 249
PA9614................................................. 249
PA9615................................................. 249
PA9642................................................. 249
PA9643....................................... 249, 342
PA9644....................................... 249, 339
PA9645....................................... 249, 340
PA9646................................................. 249
PA9647................................................. 249
PA9654................................ 264, 344-345
PA9655....................................... 264, 344
PA9669................................................. 253
PA9670................................................. 253
PA9671................................................. 253
PA9672................................................. 253
PA9673................................................. 253
PA9675................................................. 250
PA9676................................................. 249
PA9677................................................. 249
PA9678................................................. 249
PA9680................................................. 249
PA9681................................................. 249
PA9682................................................. 250
PA9683................................................. 250
PA9684................................................. 250
PA9685................................................. 250
PA9686................................................. 250
PA9687................................................. 249
PA9688................................................. 253
PA9689....................................... 253, 264
PA9690................................................. 253
PA9694................................................. 250
PA9695................................................. 250
PA9703................................................. 249
PA9704................................................. 249
PA9714....................................... 249, 342
PA9715....................................... 249, 342
PA9716................................................. 249
PA9719................................................. 250
PA9720....................................... 249, 340
PA9721................................................. 249
PA9730....................................... 249, 340
PA9731................................................. 249
PA9740................................................. 249
PA900265............ 339-340, 342-344, 347
PA901013............................................. 266
PA901014............................................. 263
PA901016............................................. 263
PA901022............................................. 255
PA901024................................... 248, 342
PA901039............................................. 347
PA901053............................................. 346
PA901054............................................. 343
PA901066............................................. 293
PA901074................... 250, 293, 339, 347
PA901081............................................. 343
PA901083............................................. 344
PA901378............................................. 346
PA901435............................................. 229
PA904893............................................. 255
PA906001............................................. 356
PA906002............................................. 340
PA906003............................................. 343
PA9010391........................................... 347
PA9010531........................................... 346
PA9013781........................................... 346
PE620................................................... 284
PE810................................................... 297
PE830................................................... 297
PE901................................................... 296
PE902................................................... 296
PE909................................................... 297
PE930................................... 296, 353-354
PE945................................................... 296
PE961................................................... 296
PE2003............................... 335, 388, 390
PE7780................................................. 284
PF8....................................................... 159
PM-400K.................................... 293, 353
PT-510....................................... 234, 235
PT-525....................................... 234, 235
PT-540................................................. 234
PT-C01................................................. 237
PT-K01................................................. 237
PT-T01............................... 237, 353, 354
PT-T02............................... 237, 353, 354
R
R438B.................................................. 132
R438-BM.............................................. 132
R540-100............................................. 134
RAM1................................................... 272
RCCX.................................................... 433
RJ11..................................................... 264
RJ45..................................................... 264
RK06AT.............................. 196, 207, 433
RK06FT.............................. 196, 207, 433
RK1230................................................ 433
RK1240.............................. 196, 202, 433
RK1240C.............................................. 202
RK1240K.............................................. 433
RK1550.............................. 196, 204, 433
RMT-1.................................................. 286
RN536-50............................................. 135
RN536-100........................................... 135
RPC...................................................... 281
RPT-1................................................... 286
RPT-2................................................... 286
RS232.................................................... 74
RS438-65............................................. 132
RS438-125........................................... 132
RS438-240........................................... 132
RS438W-100........................................ 132
RSS438-100......................................... 133
RSS438-200......................................... 133
S
S438W-200.......................................... 132
S2613.................................................. 142
SDK202GL.................................. 195, 433
SF-420AC............................................. 386
SF-530................................................. 386
SF-780................................................. 387
T
T10E0................................................... 329
T10E2................................................... 329
T10LC................................................... 329
T10MU................................................. 330
T10TB.................................................. 330
T10TD.................................................. 330
T10ZP................................................... 330
T13A2.................................................. 330
T13AF................................................... 330
T1001................................................... 329
T1010................................................... 329
T1020................................................... 329
T1025................................................... 329
T1026................................................... 329
T1030................................................... 330
T1038................................................... 330
T1040................................................... 329
T1047................................................... 330
T1050................................................... 329
T1057................................................... 330
T1081................................................... 330
T1086................................................... 329
T1087................................................... 330
T1089................................................... 329
TA 402
TC1S KIT.............................................. 214
TC-5............ 359-361, 381-382, 403, 407
TC-10.......... 361, 379-381, 399, 403, 407
TC-15................................................... 404
TC-20.................. 365-366, 396, 404, 407
TC-28......................................... 405, 407
TC-30.......................... 377-378, 404, 407
TC-40.................. 360, 368-369, 404, 407
TC-50................................. 376, 405, 407
TC-55.......................... 375-376, 405, 407
TDTLK.................................................. 400
TF70..................................................... 214
TF130................................................... 214
TFL-1................................................... 400
TFL-1R................................................. 400
TFM150-C............................................ 316
TG-600................................................. 397
TGA-2................................................... 401
TGH-2................................................... 401
THM5AC............................................... 306
THM5BAT............................................. 306
TIA-568B.............................................. 333
TITLK.................................................... 400
TK-30................................................... 392
TK-30GFI.............................................. 392
TK-30IR................................................ 392
TLA-3................................................... 401
TLK-1................................................... 400
TMA-3.................................................. 401
TPB..................................... 365-366, 398
TPI-1.................................................... 398
TPSFC.................................................. 398
TS90.................................................... 306
TS100.................................................. 305
TS100-0C............................................. 305
TS100-01............................................. 305
TS100-01E........................................... 305
TS100-01F........................................... 305
TS100-01G........................................... 305
TS100-01S........................................... 305
TSG-3.......................... 359-361, 365-370,
.........................................375-382, 402
TTL-3................................................... 402
TV90..................................................... 306
TV220................................................... 307
TV220-350........................................... 307
TV220TDR............................................ 307
U
UA12P.................................................. 180
UA12T.................................................. 180
UA22.................................................... 180
UAK...................................................... 180
UAW..................................................... 180
UC26.................................................... 180
UC40.................................................... 180
UCACSR................................................ 180
UCI.............................................. 329-331
UCUNC12.............................................. 180
UCUNC14.............................................. 180
UCUNC38.............................................. 180
UG511.................................................. 147
UG511S................................................ 147
UG511ST.............................................. 147
UG511T................................................ 147
UG512.................................................. 147
UG512S................................................ 147
UG512ST.............................................. 147
UG512T................................................ 147
UGSA150.............................................. 147
UGSA200.............................................. 147
UGSA250.............................................. 147
UGSA300.............................................. 147
UGSA350.............................................. 147
UGSA400.............................................. 147
UGSA500.............................................. 147
UGSA600.............................................. 147
UGSAK.................................................. 147
UGTA075.............................................. 147
UGTA100.............................................. 147
UGTA125.............................................. 147
UGTA150.............................................. 147
UGTA200.............................................. 147
UGTA250.............................................. 147
UGTA300.............................................. 147
UGTA350.............................................. 147
UGTA400.............................................. 147
UGTAK.................................................. 147
UT2............................................ 148, 156
UT4...................................................... 155
UT5-22................................................. 150
UT8-22................................................. 150
V
VS1-2................................................... 254
VS1-3................................................... 254
VS1-4................................................... 254
W
WGEL-1................................................ 168
WGEL-5................................................ 168
WGEL-Q................................................ 168
X
XFC-6-10.............................................. 251
XFC-6-50.............................................. 251
XFC-6-100............................................ 251
XFC-6Q-10........................................... 251
XFC-6Q-50........................................... 251
XFC-6Q-100......................................... 251
XFC-59-10............................................ 251
XFC-59-50............................................ 251
XFC-59-100.......................................... 251
NUMERIC
00001................................................ 447
00002................................................ 447
00003................................................ 447
00028................................................ 445
00031................................................ 445
00032................................................ 449
00033................................................ 449
00034R.............................................. 449
00035R.............................................. 449
00036R.............................................. 449
00037................................................ 449
00042.......... 49-51, 53-54, 57-60, 70, 75
00042P................................................ 50
00045................................................ 445
00069................................................ 449
00071................................................ 449
00073................................................ 446
00074................................................ 442
00077................................................ 442
www.greenlee.com
CANADA
INTERNATIONAL
479
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
02021................................................ 210
02022................................................ 210
02024................................................ 272
02025................................................ 272
02026................................................ 272
02028................................................ 299
02035................................................ 300
02037................................................ 210
02064................................................ 205
02065................................................ 205
02066................................................ 299
02070................................................ 424
02071................................................ 424
02086................................................ 214
02155.......................................... 11, 223
02178................................................ 272
02180................................................ 272
02182................................................ 423
02268................................................ 137
02350................................................ 449
02408.................................................. 57
02409.................................................. 57
02433.................................................. 57
02443.................................................. 57
02445.................................................. 57
0251-05M.............................................. 5
0251-06M.............................................. 5
0251-07M.............................................. 5
0251-08AD............................................. 5
0251-08AM............................................ 5
0251-08M.............................................. 5
0252-11................................................. 9
0253-01C............................................. 16
0253-02C............................................. 16
0253-05-S........................................... 18
0253-06NH-6....................................... 19
0253-11C............................................. 17
0253-12C............................................. 17
0253-13............................................... 17
0253-14C............................................. 17
0253-15C............................................. 17
0253-16C............................................. 17
0253-17C............................................. 17
0253-33C............................................. 17
0253-34C............................................. 17
0253-35C............................................. 17
0253-36C............................................. 17
0253-41C............................................. 17
0253-42C............................................. 17
0253-43C............................................. 17
0254-11............................................... 22
0254-12............................................... 22
02565................................................ 152
0257-01I.............................................. 26
0257-11I.............................................. 26
0257-12I.............................................. 26
0257-13I.............................................. 26
0257-14I.............................................. 26
0257-15I.............................................. 26
0257-16I.............................................. 26
0257-17I.............................................. 26
0258-11............................................... 37
0258-13............................................... 37
0258-14............................................... 38
0258-16............................................... 39
02624................................................ 205
02625................................................ 205
02628................................................ 205
02629................................................ 205
02630................................................ 205
02632................................................ 223
02633................................................ 230
02634................................................ 231
02635................................................ 231
02636................................................ 231
02637................................................ 230
Tel: 800.435.0786
Fax: 800.524.2853
0154-12C............................................. 21
0154-12D............................................. 21
0155-100............................................. 31
0155-16A............................................. 31
0155-200............................................. 31
0155-25A............................................. 31
0155-7MA............................................ 31
0156-11............................................... 34
0157-01I.............................................. 25
0157-11I.............................................. 25
0157-12I.............................................. 25
0157-13I.............................................. 25
0157-14I.............................................. 25
0157-17I.............................................. 25
0157-18I.............................................. 25
0158-11............................................... 34
0158-12............................................... 35
0158-13............................................... 35
0158-14............................................... 39
0158-15............................................... 37
0158-16............................................... 36
0158-17............................................... 36
0158-18............................................... 36
0158-19............................................... 35
0159-11............................................... 40
0159-12.......................................... 40-41
0159-13.......................................... 41-42
0159-14............................................... 42
0160-0001-1...................................... 337
0161-0001-1...................................... 337
0162-0001-1...................................... 337
01623................................................ 445
0163-0001-1...................................... 337
01630.................................................. 88
01631........................................ 198, 211
0164-0001-1...................................... 337
01643.................................................. 93
01648................................................ 116
0165-0001-1...................................... 337
01664................................................ 135
0168-0001-1...................................... 337
01686.................................................. 62
01696................................................ 133
0170-0001-1...................................... 337
01700........................................ 112, 116
0171-0001-1...................................... 337
01711................................................ 116
0172-0001-1...................................... 337
0173-0001-1...................................... 337
0174-0001-1...................................... 337
0175-0001-1...................................... 337
0178-0001-1...................................... 337
01850................................................ 446
01876................................................ 185
01878................................................ 185
01879.................................................. 96
01886................................................ 417
01894................................................ 446
01922R...................................... 444, 447
01975................................................ 272
01980.................................................. 50
01981.................................. 50, 196, 209
01982.................................................. 50
01983.................................................. 50
01984.................................................. 50
01985.................................................. 50
01987............................................. 49-50
01988............................................. 49-50
01992............................................. 49-50
01993............................................. 49-50
01994............................................. 49-50
01995............................................. 49-50
01996............................................. 49-50
01997............................................. 49-50
02010................ 156, 180, 359, 361, 407
02019................................................ 272
Tel: 800.435.0786
Fax: 800.451.2632
00949........................................ 190, 193
00967................................. 152-153, 158
00985................................................ 152
00986................................................ 152
0105-0001-5...................................... 300
0105-0023......................................... 300
0108-0001......................................... 300
01082................................................ 213
01202................................................ 418
01205................................................ 421
01207................................................ 421
01214................................................ 421
012154500........................................ 306
01220................................................ 420
01221................................................ 420
01222................................................ 420
01225................................................ 420
01228................................................ 418
012412................................................ 89
012413................................................ 89
012414................................................ 89
012415................................................ 89
012417.......................................... 84, 89
01274................................................ 192
012791........................................... 89-90
012792........................................... 89-90
012793........................................... 89-90
01297................................................ 445
0134-0500......................................... 305
01340................................................ 214
0151-08D............................................... 4
0151-08M.............................................. 4
0151-09CD............................................. 4
0151-09CM............................................ 4
0151-09D............................................... 4
0151-09FD............................................. 4
0151-09FM............................................ 4
0151-09M.............................................. 4
0151-09M-CP........................................ 4
0151-09SD............................................. 4
0153-01C............................................. 11
0153-02C............................................. 12
0153-03C............................................. 16
0153-04C............................................. 13
0153-11C............................................. 12
0153-12C............................................. 12
0153-13C............................................. 12
0153-14C............................................. 12
0153-15C............................................. 12
0153-16C............................................. 12
0153-21C............................................. 13
0153-22C............................................. 13
0153-23C............................................. 13
0153-24C............................................. 13
0153-25C............................................. 13
0153-26C............................................. 13
0153-27C............................................. 13
0153-28C............................................. 13
0153-31C....................................... 14, 19
0153-32C............................................. 13
0153-33C....................................... 14, 19
0153-34C....................................... 14, 19
0153-35C............................................. 14
0153-36C............................................. 14
0153-42-CP......................................... 15
0153-42C............................................. 15
0153-42CP........................................... 15
0153-43C............................................. 15
0154-06............................................... 21
0154-08............................................... 21
0154-08C............................................. 21
0154-08D............................................. 21
0154-10............................................... 21
0154-10C............................................. 21
0154-10D............................................. 21
0154-12............................................... 21
Index
00078................................................ 442
00079................................................ 449
00089................................................ 446
00097................................................ 446
00100................................................ 448
00101................................................ 448
00104................................................ 446
00105................................................ 446
00106................................................ 446
00107................................................ 446
00110................................................ 442
00111................................................ 442
00113.......................................... 29, 103
00114.......................................... 29, 103
00115.......................................... 29, 103
00116.......................................... 29, 103
00116R.............................................. 442
00117................................................ 442
00118................................................ 442
00119................................................ 442
00154................................................ 445
00155................................................ 445
00157................................................ 445
00158................................................ 445
00159................................................ 445
00160................................................ 445
00190................................................ 446
00191................................................ 446
00192................................................ 446
00193................................................ 446
00194................................................ 446
00195................................................ 446
00199................................................ 446
00288.......................................... 30, 102
00336................................................ 191
00355.......................................... 30, 130
00533................................................ 449
00534................................................ 449
00535................................................ 449
00536................................................ 449
00548A.............................................. 444
00548R.............................................. 446
00550................................................ 446
00551................................................ 446
00561................................................ 446
00571................................................ 118
00573................................................ 118
00575A.............................................. 445
00575R.............................................. 445
00585................................................ 445
00587................................................ 445
00596................................................ 445
00781......................... 150-151, 157, 159
00782......................... 150-151, 159, 433
00783......................... 151-153, 157, 159
00784................................. 150-151, 159
00791......................................... 150-151
00799................................. 150-151, 159
00804................................. 150-151, 159
00811................................. 150-151, 159
00815......................... 151-153, 157, 159
00820................................. 150-151, 159
00827........................................ 157, 159
00838................................................ 160
00844................................................ 160
00850................................................ 160
00856................................................ 160
00863................................. 150-151, 157
00867......................................... 152-153
00871................................................ 150
00872................................................ 160
00873................................................ 160
00874................................................ 160
00877................................................ 159
00936................................................ 118
00946......................... 118, 280, 314-315
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Index
MADE FOR THE TRADE!™
480
02638................................................ 230
02667................................................ 105
02669................................................ 105
02670................................................ 417
02671................................................ 105
02694................................................ 205
02706.................................................. 84
02707.................................................. 84
02708.................................................. 84
02800....................................... 94-95, 97
02801....................................... 94-95, 97
02802.................................................. 94
02803.................................................. 94
02804.................................................. 94
02805.................................................. 94
02806............................................ 94, 96
02815............................................ 58, 68
02826................................................ 192
02846................................................ 150
02912................................................ 205
02913................................................ 205
02954................................................ 228
02955................................................ 228
02956................................................ 228
02957................................................ 228
02958................................................ 228
02959................................................ 228
02960................................................ 228
02961................................................ 228
02962................................................ 228
02963................................................ 228
02964................................................ 228
02965................................................ 228
02966................................................ 228
02971................................................ 228
02972................................................ 228
02973................................................ 228
02974................................................ 228
02975................................................ 228
02976................................................ 228
02977................................................ 228
02978................................................ 228
02979................................................ 228
02980................................................ 228
02981................................................ 228
02982................................................ 228
02983................................................ 228
02984................................................ 228
02985................................................ 228
02986................................................ 228
02987................................................ 228
02988................................................ 228
02989................................................ 228
02990................................................ 228
02991................................................ 228
02992................................................ 228
02993................................................ 228
02994................................................ 228
02995................................................ 228
02996................................................ 228
02999................................................ 194
03046.......................................... 79, 194
03047.......................................... 79, 194
03048.......... 79, 153, 157, 194, 410, 417
03078........................................ 198, 211
03079................................................ 211
03080................................................ 211
03081................................................ 211
03082................................................ 211
03083................................................ 211
03084................................................ 211
03085................................................ 211
03086................................................ 211
03087................................................ 211
03088................................................ 211
03089................................................ 211
03090................................................ 211
03091................................................ 211
03092................................................ 211
03094................................................ 211
03106................................................ 116
03137................................................ 195
03170.................... 65, 66, 67, 68, 69, 70
03196................................................ 152
03201................................................ 152
03242................................................ 198
03248........................... 48, 62, 64, 66-70
03249....................................... 48, 66-70
03283......................................... 226-228
03284................................................ 226
03396................................................ 122
03400................................................ 122
03478.................................................. 98
03479.................................................. 98
03480.................................................. 98
0351-06M.............................................. 6
0351-07M.............................................. 6
0351-08M.............................................. 6
0351-08SD............................................. 6
0351-08SM............................................ 6
0353-01C............................................. 18
0353-11C............................................. 18
0353-12C............................................. 18
0353-13C............................................. 18
0353-14C............................................. 18
0353-52C............................................. 14
0353-53C............................................. 14
0354-01.......................................... 23-24
0354-11.......................................... 23-24
0354-12.......................................... 23-24
0354-13.......................................... 23-24
0354-14.......................................... 23-24
0354-15.......................................... 23-24
0354-16.......................................... 23-24
0354-17.......................................... 23-24
0354-18............................................... 23
0354-19............................................... 23
0354-20............................................... 23
0354-21............................................... 23
0354-22............................................... 23
0354-23............................................... 23
0354-24............................................... 23
0354-25............................................... 23
0354-26............................................... 23
0354-58............................................... 24
0354-59............................................... 24
0354-60............................................... 24
0354-61............................................... 24
0354-62............................................... 24
0354-63............................................... 24
0354-64............................................... 24
03548................................ 192, 415, 417
03557.................................................. 62
03558.................................................. 62
03559.................................................. 62
03561................................................ 158
0358-11L............................................. 39
0358-11L-CP........................................ 39
0358-11M............................................ 39
0358-11XL........................................... 39
03581.................................................. 91
03582.......................................... 32, 126
03583.......................................... 32, 126
03599.................................................. 92
03607.................................................. 82
03661........................................ 151, 159
03710.................................................. 86
03711.................................................. 86
03712.................................................. 86
03713.................................................. 86
03714.................................................. 86
03715.................................................. 86
03716.................................................. 86
03986...................................... 57, 59, 60
03990............................................ 57, 59
03991............................................ 57, 59
03998............................................ 57, 59
03999............................................ 57, 59
04-03-36C........................................... 88
04-03-54C........................................... 88
04-03-72C........................................... 88
04002............................................ 57, 59
04003............................................ 57, 59
04006.................... 57, 59, 60, 69, 71, 80
04008................................. 57-58, 69, 71
04010................................. 57-58, 69, 71
04011.............. 49-53, 55, 57-58, 62, 64,
04013.............. 49-53, 55, 57-58, 62, 64,
04040..................... 49-51, 54, 57-60, 70
04042.......... 49-51, 53-54, 57-58, 60, 70
04058.................................................. 57
04059.................................................. 57
04061.............. 49-53, 55, 57-58, 62, 64,
04062...................................... 57, 58, 69
04063.............. 49-53, 55, 57-58, 62, 64,
04086................................................ 119
04175...................... 57-58, 66-67, 69-70
04177...................... 57-58, 66-67, 69-70
04180...................... 57-58, 66-67, 69-70
04181................................................ 184
04183...................... 57-58, 66-67, 69-70
04184................................................ 184
04187............................................ 57, 70
04188............................................ 57, 70
04218............................................ 50, 57
04223.................................................. 57
04224.................................................. 57
04225.................................................. 57
04226.................................................. 57
04227.................................................. 57
04228.................................................. 57
04229.................................................. 57
04230.................................................. 57
04232............................................ 57, 60
04233............................................ 57, 60
04234............................................ 57, 60
04235.................................................. 57
04237.................................................. 57
04238.................................................. 57
04240.................................................. 57
04242.................................................. 57
04245.................................................. 57
04246.................................................. 57
04247.................................................. 57
04248.................................................. 57
04249.................................................. 57
04250.................................................. 57
04251.................................................. 57
04252.................................................. 57
04253.......................................... 30, 130
04256.................................................. 57
04257.................................................. 57
04258.................................................. 57
04259.................................................. 57
04292................................................ 199
04311.................................................. 62
04312.................................................. 62
04339................................................ 417
04343................................................ 430
04346................................................ 302
04460................................................ 414
0451-10M.............................................. 7
0451-10M-CP........................................ 7
0451-12D............................................... 7
0451-12M.............................................. 7
0451-16D............................................... 7
04510R....................................... 443-444
0453-11C............................................. 19
04548................................................ 227
04549................................................ 227
04550................................................ 227
04551................................................ 227
04552................................................ 227
04553................................................ 227
04554................................................ 227
04555................................................ 227
04556................................................ 227
04557................................................ 227
04558................................................ 227
04559................................................ 227
04560................................................ 227
04561................................................ 227
04562................................................ 227
04563................................................ 227
04564................................................ 227
04565................................................ 227
04566................................................ 227
04567................................................ 227
04568................................................ 227
04569................................................ 227
04570................................................ 227
04571................................................ 227
04572................................................ 227
04573................................................ 227
04574................................................ 227
04575................................................ 227
04576................................................ 227
04577................................................ 227
04578................................................ 227
04579................................................ 227
04580................................................ 227
04581................................................ 227
04582................................................ 227
04598.................................................. 46
04599.................................................. 46
04601.................................................. 46
04602.................................................. 46
04603.................................................. 46
04605.................................................. 46
04607.................................................. 46
04608.................................................. 46
04609.................................................. 46
04611.................................................. 46
04613.................................................. 46
04614.................................................. 46
04638............................................. 73-74
04652........................... 57-58, 66-67, 69
04653................................. 57, 66-67, 69
04654........................... 57-58, 66-67, 69
04655........................... 57-58, 66-67, 69
04661.................................................. 62
04663................................................ 193
04679.................................................. 57
04685.................................................. 57
04686.................................................. 70
04719................................................ 416
04734.................................................. 57
04735.................................................. 57
04736............................................ 57, 59
04823.................................................. 93
04829................................................ 198
04835................................................ 227
04836................................................ 227
04837................................................ 227
04838................................................ 227
04839................................................ 227
04840................................................ 227
04841................................................ 227
04842................................................ 227
04843................................................ 227
04844................................................ 227
04845................................................ 227
04846................................................ 227
04847................................................ 227
www.greenlee.com
CANADA
INTERNATIONAL
481
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
06752................................................ 211
06753................................................ 211
06754................................................ 211
06755................................................ 211
06756................................................ 211
06850.................................................. 10
06851.................................................. 10
06852............................................ 8, 238
06853............................................ 8, 238
06854.................................................... 9
06857............................. 8, 276, 354-355
06892.................................................. 55
06894................................................ 209
06900................................................ 117
06901................................................ 117
06902................................................ 117
06903................................................ 117
06904....................................... 48, 66-70
06923.................................................. 99
06972.............. 49-53, 55, 57-58, 62, 64,
06974....................................... 57-58, 69
06978....................................... 57-58, 69
06996.................................................. 57
06997.................................................. 57
07033................................................ 180
07035................................................ 180
07036................................................ 180
07037................................................ 180
07038................................................ 180
07039................................................ 180
07044............................................ 57, 59
07062................................................ 180
07063.................................................. 79
07084................................................ 399
07100................................................ 110
07145................................................ 117
07173............................................. 65-66
07174............................................. 65-66
07199................................................ 201
07202................................................ 201
07205................................................ 202
07274................................................ 180
07300................................................ 109
07310................................................ 109
07320................................................ 109
07405................................................ 109
07415................................................ 109
07425................................................ 109
07435................................................ 109
07445................................................ 109
07455................................................ 109
07475................................................ 431
07483................................................ 410
07486................................................ 413
07487................................................ 412
07500................................................ 132
07516................................................ 401
07519................................................ 401
07520................................................ 402
07523................................................ 400
07524................................................ 400
07525................................................ 402
07530................................................ 372
07531................................................ 372
07533................................................ 372
07534......... 361, 379-381, 399, 403, 407
07535................. 365-366, 396, 404, 407
07536......................... 377-378, 404, 407
07541................................................ 399
07549................................................ 354
07559................................................ 382
07564................................................ 376
07567................................................ 376
07568................................................ 375
07572................................................ 395
07573................................................ 395
Tel: 800.435.0786
Fax: 800.524.2853
05928.................................................. 80
05930................................................ 187
05932.................................................. 80
05935................................................ 195
05956.................................................. 62
05957.................................................. 91
05958.................................................. 91
05959.................................................. 91
05960.................................................. 91
05961.................................................. 91
06-03-36A........................................... 88
06-03-36B........................................... 88
06-03-36C........................................... 88
06-03-54A........................................... 88
06-03-54B........................................... 88
06-03-54C........................................... 88
06-03-54M........................................... 87
06-03-72A........................................... 88
06-03-72B........................................... 88
06-03-72C........................................... 88
06011................................................ 195
06015.................................................. 80
06060................................................ 399
06061................................................ 399
06065................................................ 207
06066................................................ 207
06083................................................ 399
06186................................................ 138
06196................................................ 207
06197................................................ 207
06200................................................ 399
06259................................................ 138
06265................................................ 143
06266................................................ 143
06268................................................ 143
06269................................................ 143
06274......................... 139-140, 142-143
06275................................. 139-140, 142
06276................................................ 143
06277......................... 139-140, 142-143
06278................................. 139-140, 142
06279................................................ 143
06280......................... 139-140, 142-143
06291................................................ 417
06302......................... 48, 67-69, 71, 433
06362.................................................. 57
06363.................................................. 57
06426................................................ 201
06427................................................ 201
06430.................................................. 79
0652-11............................................... 28
0652-11-CP......................................... 28
0653-01L............................................. 27
0653-01R............................................. 27
0653-01S............................................. 27
06555................................................ 187
06569................................................ 398
06570................................................ 398
06574................................................ 214
06575................................................ 214
06576................................................ 214
06577................................................ 214
06586.................................................. 57
06587.................................................. 57
06678.................................................. 50
06714................................................ 180
06727.................................................. 50
06728.................................................. 50
06729.................................................. 50
06744................................................ 211
06745................................................ 211
06746................................................ 211
06747................................................ 211
06749................................................ 211
06750................................................ 211
06751................................................ 211
Tel: 800.435.0786
Fax: 800.451.2632
05041................................................ 226
05042................................................ 226
05043................................................ 226
05044................................................ 226
05045................................................ 226
05046................................................ 226
05047................................................ 226
05048................................................ 226
05049................................................ 226
05050................................................ 226
05051................................................ 226
05052................................................ 226
05053................................................ 226
05054................................................ 226
05055................................................ 226
05056................................................ 226
05057................................................ 226
05058................................................ 226
05059................................................ 226
05060........................................ 226, 417
05061................................................ 226
05062................................................ 226
05063................................................ 226
05064................................................ 226
05065................................................ 226
05066................................................ 226
05068................................................ 226
05069................................................ 226
05070................................................ 226
05133.................................................. 85
05157................................................ 134
05158................................................ 134
05191................................................ 105
05197................................................ 105
05244............................................. 72-74
05265.................................................. 57
05266.................................................. 57
0529-0001......................................... 299
05300................................................ 105
05351................................................ 202
05353................................................ 204
05435................................................ 302
05447.................................................. 57
05448.................................................. 57
05564................................................ 146
05619................................................ 305
05645................................................ 146
05691.................................................. 91
05692.................................................. 91
05693.................................................. 91
05694.................................................. 91
05695.................................................. 91
05696.................................................. 91
05697.................................................. 91
05698.................................................. 91
05699.................................................. 91
05700.................................................. 91
05701.......................................... 91, 305
05702.................................. 91, 396, 407
05703.................................................. 91
05704.................................................. 91
05705.................................................. 91
05706.................................................. 91
05707.................................................. 91
05752.................................................. 91
05753.................................................. 91
05761.................................................. 91
05762.................................................. 91
05766.................................................. 91
05820.................................................. 91
05850................................................ 433
05851................................................ 433
05853................................................ 132
05883........................................ 186, 395
05923................................................ 187
05927.................................................. 80
Index
04848................................ 227, 412, 417
04849................................................ 227
04850................................................ 227
04851................................................ 227
04852................................................ 227
04853................................................ 227
04854................................................ 227
04855................................................ 227
04856................................................ 227
04857................................................ 227
04858................................................ 227
04859................................................ 227
04860................................ 227, 412, 417
04861................................................ 227
04862................................................ 227
04863................................................ 227
04864................................................ 227
04865................................................ 227
04866................................................ 227
04867................................................ 227
04868................................................ 227
04869................................................ 227
04870................................................ 227
04871................................................ 227
04884................................................ 158
04978.................................................. 58
04989................................................ 226
04990................................................ 226
04991................................................ 226
04992................................................ 226
04993................................................ 226
04994................................................ 226
04995................................................ 226
04996................................................ 226
04997................................................ 226
04998................................................ 226
04999................................................ 226
05000................................................ 226
05001................................................ 226
05002................................................ 226
05003................................................ 226
05004................................................ 226
05005................................................ 226
05006................................................ 226
05007................................................ 226
05008................................................ 226
05009................................................ 226
05010................................................ 226
05011................................................ 226
05012................................................ 226
05013................................................ 226
05014................................................ 226
05015................................................ 226
05016................................................ 226
05017................................................ 226
05018................................................ 226
05019................................................ 226
05020................................................ 226
05021................................................ 226
05022................................................ 226
05023................................................ 226
05024................................................ 226
05025................................................ 226
05026................................................ 226
05027................................................ 226
05028................................................ 226
05029................................................ 226
05030................................................ 226
05031................................................ 226
05032................................................ 226
05033................................................ 226
05034................................................ 226
05035................................................ 226
05036................................................ 226
05038................................................ 226
05039................................................ 226
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Index
MADE FOR THE TRADE!™
482
07574................................................ 396
07575................................................ 395
07576................................................ 396
07588......... 359-361, 381-382, 403, 407
07591................................................ 395
07592................................. 365-366, 398
07593................................................ 381
07595................................................ 404
07608................................................ 372
07631................................................ 376
07634................................................ 376
07635................................................ 375
07636................................................ 395
07638................................................ 395
07639................................................ 395
07640................................................ 393
07641................................................ 393
07653................................................ 375
07658................................................ 365
07664................................................ 380
07665................................................ 394
07666................................................ 380
07699................................................ 379
07700................................................ 379
07715........................................ 405, 407
07730................................................ 375
07732................................................ 378
07733................................................ 378
07735................................................ 361
07746................................ 376, 405, 407
07747......................... 375-376, 405, 407
07749................................................ 360
07755................................................ 371
07796........................................ 334, 389
07797................................................ 365
07798................................................ 377
07799................................................ 377
07829................................................ 431
07915................................................ 277
07924................................................ 150
07969................................................ 413
07978.......................................... 30, 130
07982.................................................. 30
07987.................................................. 30
08-03-36A........................................... 88
08-03-36B........................................... 88
08-03-36C........................................... 88
08-03-54A........................................... 88
08-03-54B........................................... 88
08-03-54C........................................... 88
08-03-72A........................................... 88
08-03-72B........................................... 88
08-03-72C........................................... 88
08-04-54M........................................... 87
08000................................................ 150
08031................................................ 191
08160................................................ 205
08161................................................ 205
08187................................................ 418
08263................................................ 142
08264................................................ 142
08265................................................ 142
08266................................................ 142
08267................................................ 142
08375.................................................. 79
08377.................................................. 79
08379.................................................. 79
08420................................................ 417
08426................................................ 417
08427................................................ 417
08428................................................ 417
08429......................................... 114-115
08550................................................ 116
08656................................................ 304
08657................................................ 304
08662........................................ 334, 389
08665................................................ 284
08666........................................ 335, 390
08670................................................ 285
08671................................. 351, 353-354
08672................................................ 286
08677................................................ 288
08678........................................ 335, 390
08679................................................ 283
08680................................................ 283
08682................................................ 289
08683........................................ 290, 391
08685.............................................. , 353
08686................................................ 281
08687......................................... 353-354
08690................................................ 287
08693........................................ 351, 353
08694................................................ 287
08695........................................ 336, 391
08702................................................ 237
08704................................................ 237
08707......................................... 353-354
08708......................................... 353-354
08709................................................ 286
08710................................................ 281
08711................................................ 286
08740................................................ 367
08741................................................ 367
08742................................................ 367
08743................................................ 366
08744................................................ 366
08745................................................ 366
08746................................................ 365
09-03-36A........................................... 88
09-03-36B........................................... 88
09-03-54A........................................... 88
09-03-54B........................................... 88
09-03-54C........................................... 88
09-03-72A........................................... 88
09-03-72B........................................... 88
09-03-72C........................................... 88
09023................................................ 362
09025................................................ 359
09027................................................ 359
09031................................................ 397
09865.......................................... 30, 130
09907................................................ 186
09908................................................ 186
09961................................................ 101
09962................................................ 101
09963................................................ 101
09964................................................ 101
09965................................................ 101
09966................................................ 101
09967................................................ 101
09968................................................ 101
09969................................................ 101
09970................................................ 101
09972................................................ 101
09975................................................ 101
09976................................................ 101
09977................................................ 101
09979................................................ 101
09990................................................ 101
09991................................................ 101
09993................................................ 102
09994................................................ 102
09995................................................ 102
09996................................................ 102
10003................................................ 102
10004................................................ 102
10005................................................ 102
10006................................................ 102
10014................................................ 155
10015................................................ 155
10028................................................ 132
10037.......................................... 29, 103
10038.......................................... 29, 103
10039.......................................... 29, 103
10043................................................ 104
10044................................................ 104
10045................................................ 104
10046................................................ 132
10048................................................ 132
10051................................................ 132
10052......................................... 132-135
10054................................................ 384
10057................................................ 384
10072.................................................. 96
10073.................................................. 96
10075.................................................. 96
10076.................................................. 96
10077.................................................. 96
10078.................................................. 96
10079.................................................. 96
10080.................................................. 96
10081.................................................. 96
10082............................................. 96-97
10101-50000..................................... 299
10101-51000..................................... 299
10101-51100..................................... 299
10101-51200..................................... 299
10101-51300..................................... 299
10101-51400..................................... 299
10107................................................ 208
10109............................................. 66-70
10110................................................ 316
10118....................... 184, 191, 194, 200,
10122................................................ 179
10134................................................ 179
10139................................................ 179
10140................................................ 179
10157.................................................. 93
10158.................................................. 93
10159.................................................. 93
10160.................................................. 93
10161.................................................. 93
10162.................................................. 93
10163.................................................. 93
10165................................................ 211
10166................................................ 211
10167................................................ 211
10168................................................ 211
10169................................................ 211
10170................................................ 211
10171................................................ 211
10172................................................ 211
10173................................................ 211
10174................................................ 211
10175................................................ 211
10176................................................ 211
10177................................................ 211
10179................................................ 211
10180................................................ 211
10182........................................ 193, 211
10185.................................................. 93
10186.................................................. 93
10188................................................ 212
10189................................................ 212
10190................................................ 212
10192................................................ 212
10193................................................ 212
10195................................................ 212
10196................................................ 212
10197................................................ 212
10198................................................ 212
10199................................................ 212
10200................................................ 212
10202................................................ 212
10203................................................ 212
10205................................................ 212
10206................................................ 212
10207................................................ 212
10208................................................ 212
10209................................................ 212
10210................................................ 212
10211.................................................. 93
10214.................................................. 93
10220.................................................. 33
10227................................................ 200
10229................................................ 200
10231................................................ 200
10234................................................ 200
10237................................................ 200
10252................................................ 147
10253................................................ 147
10260................................................ 212
10261................................................ 212
10268................................................ 392
10278................................................ 147
10279................................................ 147
10280................................................ 147
10281................................................ 147
10282................................................ 147
10283................................................ 147
10284................................................ 147
10285................................................ 147
10286................................................ 147
10287................................................ 147
10289................................................ 147
10291................................................ 147
10293................................................ 147
10295................................................ 147
10297................................................ 147
10300............................................ 8, 238
10303.................................................. 79
10304................................................ 147
10307.................................................. 79
10308.................................................. 79
10309.................................................. 79
10311................................................ 147
10344.................................................. 79
10353................................................ 147
10354................................................ 147
10355................................................ 147
10356................................................ 147
10357................................................ 147
10358................................................ 147
10359................................................ 147
10360................................................ 147
10378........................................ 417, 434
10383.................................................. 64
10391.................................................. 64
10397................................................ 191
10398................................................ 191
10415.................................................. 80
10419.................................................. 80
10437................................................ 169
10438................................................ 169
10439................................................ 169
10442................................................ 137
10443................................................ 137
10445................................................ 144
10446................................................ 144
10447................................................ 144
10453................................................ 137
10462................................................ 422
10475............................................. 63-64
10476............................................. 63-64
10497................................................ 136
10498................................................ 136
10504................................................ 136
10506................................................ 136
10507................................................ 187
1052011............................................ 318
105202K..................................... 317-318
105203K............................................ 318
105206K............................................ 318
10520E2............................................. 318
www.greenlee.com
CANADA
INTERNATIONAL
483
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
12162.................................................. 81
12163.................................................. 81
12164.................................................. 81
12165.................................................. 81
121AV...................... 57, 59-60, 69, 71, 80
1221-H............................................... 445
12211................................................ 163
12222................................................ 210
12223................................................ 210
12225................................................ 210
12226................................................ 210
12227................................................ 210
12228................................................ 210
12229................................................ 210
12237................................................ 210
12274................. 79, 179, 184, 191, 194,
1230........................... 214-218, 415, 417
12302.................................................. 50
12303.................................................. 50
12304.................................................. 50
12305.................................................. 50
12306.................................................. 50
12307.................................................. 50
12308.................................................. 50
12309.................................................. 50
12310.................................................. 50
12311.................................................. 50
12312.................................................. 50
12313.................................................. 50
12314.................................................. 50
12315.................................................. 50
12316.................................................. 50
12317.................................................. 47
12318.................................................. 47
12319.................................................. 47
12320.................................................. 47
12321.................................................. 47
12322.................................................. 47
12323.................................................. 47
12324.................................................. 47
12325.................................................. 47
12326.................................................. 47
12327.................................................. 47
12328.................................................. 47
12329.................................................. 47
12330.................................................. 47
12331.................................................. 47
12332.................................................. 47
12333.................................................. 47
12334.................................................. 47
12335.................................................. 50
12336.................................................. 50
12337.................................................. 50
12338.................................................. 50
12339.................................................. 50
12340.................................................. 50
12341.................................................. 50
12342.................................................. 50
12343.................................................. 50
12344.................................................. 50
12345.................................................. 50
12346.................................................. 50
12347.................................................. 50
12348.................................................. 50
12349.................................................. 50
12350.................................................. 50
12351.................................................. 50
12352.................................................. 50
12353.................................................. 50
12354.................................................. 50
12355.................................................. 50
12356.................................................. 50
12357.................................................. 50
12358.................................................. 50
12360.................................................. 50
12361.................................................. 50
Tel: 800.435.0786
Fax: 800.524.2853
11520E2............................................. 318
1155-0526.................................. 314-315
1155-5001......................................... 302
1155-5002......................................... 302
1155-5003......................................... 302
1155-5004......................................... 302
1155-5005......................................... 302
1155-5006......................................... 302
1155-7001......................................... 301
11583................................................ 136
11584................................................ 136
11585................................................ 136
11617.......................................... 32, 126
11627.................................................. 81
11628.................................................. 81
11689................................................ 371
11761................................................ 185
11768................................................ 185
11789.................................................. 71
11790.................................................. 71
11791.................................................. 71
11798................................................ 214
117AV............................................. 57, 59
11841........................................ 183, 190
11845................................................ 190
11851........................................ 183, 190
11856........................................ 183, 190
11865................................................ 382
11868................................................ 369
11869................................................ 369
11870................................................ 368
11871................................................ 368
11877........................................ 293, 353
11890................................................ 180
118AV............................................. 57, 59
11903.................................................. 71
11915.................................................. 31
11917.................................................. 31
12-04-36A........................................... 88
12-04-54A........................................... 88
12-04-54C........................................... 88
12-04-72A........................................... 88
12-04-72C........................................... 88
12028................................................ 400
12031................................................ 401
12032................................................ 401
12034........................ 359-361, 365-370,
.........................................375-382, 402
12035................................................ 400
12037................................................ 370
12039................................................ 370
12040................................................ 370
12079.................................................. 71
12085.................................................. 71
12086.................................................. 71
12087.................................................. 71
12092................................................ 182
12093................................................ 182
12097...................................... 52, 70, 77
12099................................ 46, 52, 70, 77
12123................................................ 361
12124................................................ 392
12125................................................ 392
12126................................................ 384
12127................................................ 392
12131................................................ 152
12132................................................ 152
12133................................................ 152
12135................................................ 385
12136................................................ 385
12137................................................ 386
12138................................................ 386
12139................................................ 387
12151.................................................. 81
12160.................................................. 81
12161.................................................. 81
Tel: 800.435.0786
Fax: 800.451.2632
11097.................................................. 84
11098.................................................. 84
11099.................................................. 84
11100.................................................. 84
11101.................................................. 84
11102.................................................. 84
11107................................................ 119
11126................................................ 119
11132................................................ 119
11145................................................ 151
11146................................................ 119
11147................................................ 157
11152......................................... 150-151
11170.................................................. 94
11180.................................................. 94
11221................................................ 153
11222................................................ 153
11223................................................ 153
11230................................................ 151
11256................................................ 185
1125GB.............................................. 105
11261.................................................. 49
11262.................................................. 49
11263.................................................. 49
11264.................................................. 49
11265.................................................. 49
11266.................................................. 49
11267................................................ 429
11268................................................ 429
11269................................................ 429
11270................................................ 429
11271................................................ 429
11273................................................ 428
11274................................................ 428
11275................................................ 428
11276................................................ 428
11277................................................ 428
11278................................................ 428
11279................................................ 428
11280................................................ 428
11281................................................ 429
11289................... 71, 119, 121-124, 433
11301................................................ 429
11306................................................ 429
1131-0202.................................. 302-303
11316................................................ 429
11321................................................ 429
1134-1002S................................ 302-303
1134-5029......................................... 303
11342................................................ 428
11344................................................ 428
11346................................................ 428
11348................................................ 428
11357.................................................. 49
11361.................................................. 49
11362.................................................. 49
11363.................................................. 49
11364.................................................. 49
11365.................................................. 49
11366.................................................. 49
11367................................................ 428
1137-5002......................................... 302
11372................................................ 361
11397................................................ 192
113AV............................................. 57, 59
11412................................................ 435
11422................................................ 136
11426................................................ 136
11427................................................ 136
1143-5000......................................... 303
1144-5000......................................... 303
114AV............................................. 57, 59
115201U............................................ 318
115202K............................................ 318
115203K............................................ 318
115206K............................................ 318
Index
10538.................................................. 84
10565................................................ 134
10582......................................... 314-315
1062.................................................. 330
10628.................................................. 15
10629.................................................. 19
10633.......................................... 11, 223
10640........................................ 444, 448
10641................................................ 448
10642................................................ 448
10687.................................................. 96
10763................................................ 204
10792................................................ 280
10800.................................................. 49
10801.................................................. 49
10802.................................................. 49
10803.................................................. 49
10804.................................................. 49
10805.................................................. 49
10806.................................................. 49
10807.................................................. 49
10826......................................... 122-124
10856................................................ 380
10857................................................ 380
10858................................................ 379
10859................................................ 379
10860................................................ 378
10861................................................ 378
10862................................................ 377
10863................................................ 377
10872.......................................... 11, 223
10873.......................................... 11, 223
10874.......................................... 11, 223
10875.......................................... 11, 223
10876.......................................... 11, 223
10877.......................................... 11, 223
10917................................................ 122
10918................................................ 122
10919................................................ 122
10920......................................... 122-124
10921......................................... 122-124
10922......................................... 122-124
10923................................................ 124
10924................................................ 124
10925................................................ 124
10939......................................... 122-124
10946................................................ 124
10963................................................ 124
10996................................................ 212
10997................................................ 212
10998................................................ 212
10999................................................ 212
11003................................................ 212
11004................................................ 212
11006R.............................................. 460
11006X.............................................. 460
11007................................................ 212
11010................................................ 212
11011................................................ 212
11012................................................ 212
11013................................................ 212
11014................................................ 212
11015................................................ 212
11016................................................ 212
11018................................................ 212
11020................................................ 212
11038................................................ 142
11039................................................ 142
11040................................................ 142
11041................................................ 142
11042................................................ 142
11050................................................ 337
11059................................................ 337
11072................................................ 119
11075................................................ 119
11089................................................ 119
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Index
MADE FOR THE TRADE!™
484
1236D.................................................. 87
123AV.................................. 57-58, 69, 71
1240........................................... 214-218
1240K................................................ 215
12411.................................................. 89
12416.................................................. 84
12418.................................................. 84
12427................................................ 453
12428................................................ 453
12429................................................ 453
12430................................................ 453
12431................................................ 453
12469................................................ 132
12470................................................ 132
12471................................................ 132
12472................................................ 132
12476................................................ 132
12477.................................................. 31
12478.................................................. 31
12479.................................................. 31
12480................................................ 133
12481................................................ 133
12482................................................ 133
12483................................................ 135
12484................................................ 135
124AV............... 49-53, 55, 57-58, 62, 64,
124AVP........................................... 49, 50
12524................................................ 113
12526................................................ 186
12566................................................ 200
12567................................................ 200
12568................................................ 200
12569................................................ 200
12578................................................ 251
12586................................................ 251
12587................................................ 251
12589................................................ 251
1258D.................................................. 87
12590................................................ 251
12591................................................ 251
12593................................................ 251
12594................................................ 251
12595................................................ 251
12598................................................ 143
12599................................................ 307
125AV.................................. 57-58, 69, 71
125Q............................................... 89-90
12600................................................ 306
12629.......................................... 28, 188
12630.................................................. 85
12631.................................................. 85
12632.................................................. 85
12633.................................................. 85
12634.................................................. 85
12635.................................................. 85
12636.................................................. 85
12637.................................................. 85
12638.................................................. 85
12639.................................................. 85
12640.................................................. 85
12641.................................................. 85
12642.................................................. 85
12656................................................ 147
12671................................................ 425
12676................................................ 113
12677................................................ 113
12678................................................ 113
12679........................................ 246, 277
12680................................................ 186
12681................................................ 186
12689................................................ 113
12690................................................ 113
12691................................................ 113
126AV............... 49-53, 55, 57-58, 62, 64,
126AVP................................................. 50
12709................................................ 132
12710................................................ 132
12711................................................ 133
12712................................................ 133
12713................................................ 133
12714................................................ 133
12715................................................ 135
12716................................................ 135
12717................................................ 134
12718................................................ 134
12725................................................ 371
12726................................................ 381
12727................................................ 362
12729................................................ 132
1272D.................................................. 87
12730................................................ 132
12787............................................ 94, 96
127AV....................................... 57, 58, 69
12810................................................ 113
12824................................................ 152
12831................................................ 113
12832................................................ 113
12833................................................ 113
12834................................................ 113
12835................................................ 113
12836................................................ 113
12837................................................ 113
12838................................................ 113
12839................................................ 113
12847................................................ 187
12848................................................ 400
12849................................................ 384
12850................................................ 384
12851................................................ 384
12852................................................ 384
12853................................................ 384
12856................................................ 179
12857................................................ 179
12858................................................ 194
12859................................................ 194
12860................................................ 194
12861................................................ 194
12862................................................ 194
128AV............... 49-53, 55, 57-58, 62, 64,
128AVP............................................ 49-50
12918................................................ 136
12919................................................ 136
12920................................................ 136
12922................................................ 136
12CCX................................. 215, 217-218
13048................................................ 302
1310.................................................. 327
1310/1550nm.................................... 311
13110.................................................. 29
13158................................................ 442
13193................................................ 123
13208................................................ 123
13209................................................ 123
13210................................................ 123
13211................................................ 123
13232................................................ 123
13251................................................ 123
13252................................................ 123
13266.................................................. 71
13267.................................................. 71
13268.................................................. 71
13276.................................................. 71
13277.................................................. 71
13284......................... 48, 67-69, 71, 430
1332.......................................... 410, 417
13382................................................ 123
13386.................................................. 36
13387.................................................. 36
13388.................................................. 35
13393.................................................. 27
13394.................................................. 27
13395.................................................. 27
13438.................................................. 16
13460................................................ 162
13483.................................................. 31
13484.................................................. 31
13487.................................................... 4
13488.................................................... 4
13490.................................................. 15
13491.................................................. 13
13517.................................................. 23
13518.................................................. 23
13519.................................................. 23
13520.................................................. 18
13679................................................ 122
13800................................................ 430
13814.................................................. 71
13815................................................ 114
13950................................................ 442
13955................................................ 157
1399.................................................. 104
1399-22............................................. 104
1412D.................................................. 87
14159................................................ 114
1418D.................................................. 87
1424D.................................................. 87
14265................................................ 124
14279................................................ 119
14287................................................ 119
1429AV..................... 57-58, 66-67, 69-70
1430AV..................... 57-58, 66-67, 69-70
1431AV..................... 57-58, 66-67, 69-70
1432AV..................... 57-58, 66-67, 69-70
1433AVBB...................................... 57, 70
1434AV..................................... 57, 70, 75
1436D.................................................. 87
14392................................. 132-133, 135
14486................................. 450-451, 453
14487................................. 450-451, 453
14496................................................ 123
14568................................................ 157
146009800........................................ 305
14722.......................... 49-55, 57-60, 62,
14722P........................................... 49-50
14909................................................ 122
149H.................................................... 85
149H-1/4.............................................. 85
149H-3/8.............................................. 85
149H–1................................................ 85
149H–1-1/2.......................................... 85
149H–1-1/4.......................................... 85
149H–1-1/8.......................................... 85
149H–1-3/4.......................................... 85
149H–1-3/8.......................................... 85
149H–2................................................ 85
149H–2-1/4.......................................... 85
149H–2-1/8.......................................... 85
149H–2-9/16........................................ 85
149H–3................................................ 85
149H–3-5/8.......................................... 85
149H–4-5/8.......................................... 85
150.................................................... , 90
15000................................................ 150
15013V............................................... 452
15031V............................................... 450
15032V............................................... 450
15033V............................................... 450
150Q.................................................... 89
15128................................................ 118
15129................................................ 119
15135................................................ 119
15136................................................ 119
15145................................................ 119
15147................................................ 119
15150................................................ 119
15222X....................................... 451-452
15223X....................................... 451-452
15224X....................................... 451-452
15225X....................................... 451-452
15226X....................................... 451-452
15227X....................................... 451-452
15251X....................................... 451-452
15252X....................................... 451-452
15253X....................................... 451-452
15254X....................................... 451-452
15255X....................................... 451-452
15256X....................................... 451-452
1531.................................. 121, 415, 417
15316................................................ 165
15321......................................... 425-426
15324................................................ 160
15325........................................ 151, 160
15326................................................ 160
15327................................................ 160
15332................................................ 164
15341................................................ 417
15343................................................ 423
15358................................................ 160
15362......................................... 160-162
15363................................................ 160
15364................................................ 160
15372................................................ 425
15375......................................... 425-426
1550.......................................... 215, 327
1557AA..................................... 66-70, 76
15631.................................................. 71
15669................................................ 124
15671................................................ 124
15677.......................................... 71, 430
15829................................................ 122
15906............................................. 67-69
15908....................................... 48, 66-69
15909............................................. 68-69
15910............................................. 68-69
15911.................................................. 71
15930................................................ 450
15931................................................ 450
15932................................................ 450
15933................................................ 450
15934................................................ 450
15935................................................ 450
16-04-36A........................................... 88
16-04-54A........................................... 88
16-04-72A........................................... 88
16001................................................ 450
16002................................................ 450
16101................................................ 451
16102................................................ 451
16249................................................ 122
1636.......................................... 410, 417
16407........................................ 305, 307
16414................................................ 307
16460................................................ 118
16464................................................ 122
16470................................................ 123
16477................................................ 124
16480................................................ 122
16491................................................ 123
16504................................................ 143
16505................................................ 143
16506................................................ 143
16511........................................ 140, 142
16512................................................ 142
16513................................................ 142
16514................................................ 142
16515................................................ 142
16517................................. 139, 141-142
16563................................................ 119
16634.................................................. 71
16646........................................ 139, 141
16674................................................ 300
16681................................................ 300
16741................................................ 124
16747................................................ 124
www.greenlee.com
CANADA
INTERNATIONAL
485
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
1941-5......................................... 30, 102
1950.............................................. 8, 238
1951.............................................. 8, 238
19524................................................ 171
1955............................... 8, 276, 354-355
1956.............................................. 8, 238
1960...................................................... 9
1969.................................................... 27
19811................................................ 124
1990.......................................... 196, 209
19913.................................................. 98
19973.................................................. 58
19974.................................................. 58
19975.................................................. 57
19976.................................................. 57
19977.................................................. 57
19978.................................................. 57
19980.................................................. 57
19987................................................ 189
19988......................................... 114-115
19990................................................ 193
2000H........................................ 335, 390
2000R........................................ 335, 390
2007.......................................... 383, 385
2008........................................... 383-384
200B-G............................................... 285
200C.................................................. 285
200EP.................................. 351, 353-354
200EP-G............................................. 285
200FP.......................................... 285-286
200FP/50........................................... 286
200GX................................................ 285
200XP......................................... 285-286
20158................................................ 180
2018R................................................ 164
2018S.............................................. , 164
20191................................................ 299
20231................................................ 115
20232................................................ 115
20243............................................ 9, 221
20249R.............................................. 164
2024R................................................ 164
2024S................................................ 164
2030R................................................ 164
2030S................................................ 164
20344.................................................. 86
20346.................................................. 86
20348.................................................. 86
20350.................................................. 86
20352.................................................. 86
20354.................................................. 86
20357.................................................. 86
20358.................................................. 86
20359.................................................. 86
20360.................................................. 86
20361.................................................. 86
20364.................................................. 86
20369R.............................................. 164
2036R................................................ 164
2036S................................................ 164
20486.................................................. 71
20495.................................................. 52
2050.................................................. 124
20533................................................ 445
20573................................................ 433
20667.................................................. 57
20668.................................................. 57
20670.................................................. 57
20671.................................................. 57
20673.................................................. 57
20676.................................................. 57
20678.................................................. 57
20679.................................................. 57
20942................................................ 309
20943................................................ 309
20944................................................ 309
Tel: 800.435.0786
Fax: 800.524.2853
1914...................................................... 8
19140.................................................. 95
19141............................................ 95, 98
19143............................................ 95, 98
19144.................................................. 95
19145.................................................. 95
19146............................................ 95, 98
19147.................................................. 95
19148............................................ 95, 98
19149.................................................. 95
19150.................................................. 95
19151.................................................. 95
19152............................................ 95, 98
19153.................................................. 95
19154............................................ 95, 98
19155............................................ 95, 98
19157.................................................. 95
19158.................................................. 95
19159............................................ 95, 98
1916...................................................... 8
19160.................................................. 95
19161............................................ 95, 98
19162............................................ 95, 98
19163.................................................. 95
19164.................................................. 95
19165.................................................. 95
19166.................................................. 95
19167............................................ 95, 98
19168.................................................. 95
19169............................................ 95, 98
1917...................................................... 8
19170.................................................. 95
19171.................................................. 95
19172............................................ 95, 98
19174............................................ 95, 98
19175.................................................. 95
19176.................................................. 95
19177............................................ 95, 98
19178.................................................. 95
19179.................................................. 95
1918...................................................... 8
19180............................................ 95, 98
19181............................................ 95, 98
19182.................................................. 95
19183.................................................. 95
19184.................................................. 95
19185................................................ 161
19186................................................ 161
19192............................................ 96, 98
19193............................................ 48, 59
1921.................................................... 10
19216................. 360, 368-369, 404, 407
19219................................................ 182
19220................................................ 182
19221................................................ 182
19222................................................ 182
19223................................................ 182
1923.................................................... 10
19232................................................ 153
19234................................................ 182
19237................................................ 315
19238................................................ 315
19239................................................ 315
19240................................................ 315
19247................................................ 315
19248................................................ 315
19249................................................ 315
19250................................................ 315
19251................................................ 315
19252................................................ 315
1925AA..................................... 48, 66-70
1926AA..................................... 48, 66-70
1927.................................................... 10
1935.............................................. 9, 221
1940............................................ 30, 102
1941-1......................................... 30, 102
Tel: 800.435.0786
Fax: 800.451.2632
17700................................ 57, 60, 69, 71
17707................................................ 433
1783AV................................................. 57
1789AV................................................. 57
1790AV................................................. 57
1791AV................................................. 57
1792AV................................................. 57
17937................................................ 118
1793AV................................................. 57
17944................................................ 118
1794AV................................................. 57
1795AV................................................. 57
1796AV................................................. 57
1797AV................................................. 57
17984................................................ 118
17986................................................ 118
1798AV................................................. 57
1800G1.............................................. 114
1802........................................... 122-125
1805.................................................. 121
1810.................................................. 114
18102................................................ 113
18103................................................ 113
18104................................................ 113
1811.................................................. 114
1813.................................................. 121
1815AV................................................. 57
1816AV................................................. 57
1818G1.............................................. 115
18202................................................ 157
1820AV................................................. 57
1821AV................................................. 57
18272................................................ 430
18297................................................ 432
18331...................................... 57, 60, 69
18358.................................................. 85
18402............................................ 67, 69
18416................................................ 432
18557.................................................. 71
18558.................................................. 71
18559.................................................. 71
18635.................................................. 57
18636................................................ 115
18642................................................ 115
18681................................................ 115
18772................................................ 115
18827................................................ 115
18828................................................ 115
18829................................................ 115
18830................................................ 115
18831................................................ 115
18832................................................ 115
18886.................................................. 57
18887.................................................. 57
18890.................................................. 57
18891.................................................. 57
18892.................................................. 57
18905.................................................. 57
18906.................................................. 57
1895.................................................. 127
1903.......................................... 246, 277
1905.................................................. 220
1906SB................................................ 52
19094................................................ 164
19107................................................ 142
19109................................................ 142
19110................................................ 142
1913...................................................... 8
19131.................................................. 95
19132............................................ 95, 98
19133.................................................. 95
19134............................................ 95, 98
19135............................................ 95, 98
19136............................................ 95, 98
19137.................................................. 95
19138............................................ 95, 98
Index
16751................................................ 124
16752................................................ 124
16753................................................ 124
16754................................................ 124
1675AV..................................... 50, 57, 75
16797................................................ 160
16798......................................... 160-161
16799................................................ 160
168...................................................... 90
16800................................................ 160
16801................................................ 160
16802................................................ 160
16854................................................ 169
16856................................................ 169
16857................................................ 169
16858................................................ 169
16859................................................ 169
168Q.................................................... 89
16951................................. 139, 141-142
17076................................................ 425
17091............................................. 66-69
170XL................................. 312, 323, 332
1723.......................................... 115, 118
1725...................... 66, 71, 219, 431, 433
17265................................................ 160
17266................................................ 160
17299........................................ 160, 306
1731............................................ 71, 433
1731F1725........................................... 71
1731H767............................................ 71
1732.................................................... 71
1732H755............................................ 71
17350................................................ 305
1736.................................................. 123
1737.................................................. 124
17370................................................ 169
1738.................................................. 119
17398................................................ 306
17404................................................ 307
174173401................................ 305, 307
1742AV................................................. 57
174326900........................................ 307
1743AV................................................. 57
1744AV................................................. 57
17450................................................ 184
17451................................................ 184
17459................................................ 184
1745AV................................................. 57
1746AV................................................. 57
1747AV................................................. 57
1751AV................................................. 57
1752AV................................................. 57
1753AV................................................. 57
1754AV................................................. 57
1756AV........................................... 57, 60
17571................................................ 169
1757AV........................................... 57, 60
1758AV........................................... 57, 60
1759AV................................................. 57
17600................................................ 186
1760AV................................................. 57
17611.................................................. 81
17612.................................................. 81
17613.................................................. 81
17614.................................................. 81
17615.................................................. 81
17616.................................................. 81
1761AV................................................. 57
17620.................................................. 81
1762AV................................................. 57
1763AV................................................. 57
1764AV................................................. 57
17687...................................... 57, 60, 69
17690...................................... 57, 60, 69
17697................................ 57, 60, 69, 71
177.................................................... 304
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Index
MADE FOR THE TRADE!™
486
20945................................................ 308
20947................................................ 362
20956................................................ 159
20957.................................................... 6
20958.................................................... 6
20963....................................... 65-70, 76
20965................................................ 417
20966................................................ 417
20988......................................... 314-315
20988......................................... 314-315
20989......................................... 314-315
20989......................................... 314-315
20990......................................... 314-315
20990......................................... 314-315
20996......................................... 314-315
20997......................................... 314-315
20998......................................... 314-315
20999......................................... 314-315
20999......................................... 314-315
2110.................................................. 305
21100................................................ 316
21115.................................................. 57
2113B....................................... 65-70, 76
21214.................................................. 57
21216.................................................. 57
21257......................................... 122-125
21285.................................................. 80
21297............................................. 79-80
21316................................ 57, 60, 69, 71
21318................................ 121, 125, 127
21346........................................ 121, 125
21357........................................ 122, 125
21359........................................ 123, 125
21360................................................ 125
2141.................................................. 305
21413................................................ 125
2142.................................. 155, 410, 417
21467................................................ 434
21468................................................ 434
21471................................................ 434
21472................................................ 434
21474................................................ 434
21477................................................ 434
21480................................................ 434
21481................................................ 143
21482................................................ 143
21489.................................................. 57
21491.................................................. 57
21519.................................................. 57
21520................................................ 434
21521................................................ 434
21533................................................ 220
21541........................................ 121, 125
21542................................................ 125
21543................................................ 125
21544................................................ 125
21545................................................ 125
21546................................................ 165
21550................................................ 165
21552................................................ 155
21557.................................................. 80
21562................................................ 144
21638................................................ 305
21652........................................ 456, 460
21652B............................... 456-457, 460
21655................................................ 460
21660................................................ 460
21875................................................ 144
21954................................................ 119
21978................................................ 220
21979................................................ 425
21980......................................... 425-426
21982................................................ 420
22084................................................ 212
22085................................................ 212
22086................................................ 212
22087................................................ 212
22088................................................ 212
22089................................................ 212
22090................................................ 212
22121................................................ 212
22122................................................ 212
22123................................................ 212
22124................................................ 212
22125................................................ 212
22126................................................ 212
22127................................................ 212
22128................................................ 212
22129................................................ 212
22132................................................ 190
22192................................................ 115
22220................................................ 115
22279................................................ 184
22280.................................................. 80
22286.................................................. 80
22288.................................................. 80
22289.................................................. 80
22291................................................ 187
22296................................................ 187
22410................................................ 158
22451................................................ 158
22563.................................................. 57
22564.................................................. 57
22565.................................................. 57
22566.................................................. 57
22567.................................................. 57
22568.................................................. 57
22578................................................ 219
22579................................................ 219
22590................................................ 219
2260.......................................... 411, 417
22618........................................ 417, 434
22682................................................ 219
22875................................................ 419
22893................................................ 369
22894................................................ 369
22895................................................ 368
22897................................................ 368
229...................................................... 74
22934................................................ 219
23000................................................ 438
23001................................................ 438
23010................................................ 438
23011................................................ 438
23012................................................ 438
23013................................................ 438
23014................................................ 438
23022X.............................................. 438
23064................................................ 438
23076................................................ 272
231...................................................... 74
23196................................................ 411
23270................................................ 411
23273........................................ 156, 410
23274........................ 119, 121, 125, 415
23276................................................ 411
23360................................. 139-140, 142
23362......................... 153-154, 157, 410
23363........................................ 121, 410
23368................................................ 143
234...................................................... 74
23405................................ 153, 417, 423
23446................................................ 117
23483................................................ 194
23499................................................ 118
23505................................................ 118
23521................................................ 201
23541................................................ 118
23635.......................................... 29, 103
23636................................................ 292
23639................................................ 291
23640................................................ 291
23641.......................................... 28, 103
23665................................................ 172
23773................................................ 166
23774........................................ 156, 166
23775................................................ 166
23776................................................ 166
23777........................................ 156, 166
238...................................................... 74
23818........................................ 115, 118
23892................................................ 219
23893................................................ 219
23902................................................ 137
23948.................................................. 27
23955.................................. 66, 184, 219
24053.............................................. , 280
24054................................................ 214
24163................................................ 210
24326................................................ 142
24395................................................ 219
24400................................................ 114
24401................................................ 114
24459............................................ 57, 60
24462............................................ 57, 60
24476.................................................. 57
24477.................................................. 57
2448.................................. 156, 410, 417
24496................................................ 431
24564................................................ 187
24565................................................ 187
24567................................................ 187
2460.................................. 121, 410, 417
2472.......................................... 410, 417
24753................................................ 114
24821................. 146, 152-154, 156, 159
24823.................................................. 80
249AVBB........... 49-51, 54, 57-60, 70, 75
249AVBBP.......................................... , 50
249AVBBP*........................................... 49
24B.................................................... 391
24BK.................................................. 391
25001................................................ 438
25094............................................. 66-67
25097............................................. 65-66
25120................................................ 438
25144.................................................. 71
25160................................................ 162
25169.................................................. 71
25184................................................ 124
25214................................................ 431
25263................................................ 118
25268................................................ 118
25273................................................ 118
252B.......................................... 325, 332
25340.................................................. 57
25341.................................................. 57
25342.................................................. 57
25344.................................................. 57
25349.................................................. 57
25350.................................................. 57
25351.................................................. 57
25360.................................................. 57
25361.................................................. 57
25372.................................................. 57
25383.................................................. 57
253B........................... 317, 325-326, 332
25403.................................................. 57
25427.................................................. 57
25428.................................................. 57
25591................................................ 425
255MT................................. 325-326, 332
25616................................................ 438
25619................................................ 438
25622................................................ 438
25625................................................ 438
25626................................................ 438
25644................................. 139-140, 142
25645........................................ 139, 142
25646................................. 139-140, 142
25652R.............................................. 438
25688................................................ 314
25689................................................ 314
25690................................................ 314
25691......................................... 314-315
25692......................................... 314-315
25752......... 182, 188-189, 197-199, 221
25766................................................ 214
257MT................................. 325-326, 332
25894................................................ 316
26022................................................ 439
26032................................................ 439
26033................................................ 439
26036................................................ 439
26038................................................ 439
26096................................................ 435
26297................................................ 121
262A................................... 327, 332-333
26300................................................ 121
26306................................................ 121
26307......................................... 314-315
26309................................................ 121
26349................................................ 121
26366................................................ 121
26368................................................ 161
26369................................................ 161
26370................................................ 161
26375................................................ 287
263LX......................................... 323, 332
263MT........................................ 323, 332
26438................................................ 419
26534.................................................. 72
26536.................................................. 72
26538.................................................. 72
26580................................................ 121
26584................................................ 121
26588................................................ 121
26594................................................ 121
265A.......................................... 327, 328
26624................................................ 121
26777................................................ 142
27318................................................ 435
27321................................................ 299
27335.................................................. 71
27338................................................ 299
27345................................................ 299
27361.................................................. 71
27362.................................................. 71
27364................................................ 121
27381................................................ 121
27383................................................ 164
27384................................................ 164
27386................................................ 164
27387................................................ 164
27388................................................ 164
27389................................................ 164
27390................................................ 164
27391................................................ 164
27392................................................ 164
27393................................................ 164
27395................................................ 129
27416................................................ 121
27417................................................ 121
27433............................................. 68-69
27538.................................................. 98
27554................................................ 120
27555................................................ 120
27811................................................ 129
27989................................................ 117
27990................................................ 117
28044........................................ 417, 423
28154...................................... 46, 48, 70
28155...................................... 46, 48, 70
28156............................................ 46, 48
www.greenlee.com
CANADA
INTERNATIONAL
487
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
31543.................................................. 86
31544.................................................. 86
31545.................................................. 86
31569................................................ 161
31573................................................ 161
31651........................................ 155, 410
31756.... 50-55, 58, 62, 64, 66-67, 69-70
31757......... 50-53, 55, 62, 64, 66-67, 70
31758......... 50-53, 55, 62, 64, 66-67, 70
31759......... 50-53, 55, 62, 64, 66-67, 70
31760......... 50-53, 55, 62, 64, 66-67, 70
31761......... 50-53, 55, 62, 64, 66-67, 70
31788.................................................. 83
31790.................................................. 83
31792.................................................. 83
31794.................................................. 83
31796.................................................. 83
31798.................................................. 83
31832.................................................. 70
31834.................................................. 70
31849.................................................. 70
31855................................................ 172
31866................................................ 172
31867................................................ 172
31872........................... 46, 61-62, 64, 77
31880............................................ 51, 58
31881................................................ 121
31882................................................ 121
31883................................................ 121
31884................................................ 121
31888.................................................. 10
31889.................................................... 8
31890.................................................... 8
31891.................................................... 8
31893.............................................. 8, 28
31894.................................................... 8
31905................................................ 171
31908................................................ 172
31910................................................ 171
31925................................................ 165
31926................................................ 165
31927................................................ 165
31929................................................ 165
31930................................................ 165
31931................................................ 165
31961................................................ 104
31962.................................................. 50
31963.................................................. 50
31964.................................................. 50
31965.................................................. 50
31966.................................................. 50
31967.................................................. 50
31969..................... 50, 54-55, 60, 64, 67
31970........................... 50, 54-55, 64, 67
31971........................... 50, 54-55, 64, 67
31973........................... 50, 54-55, 64, 67
31975................................. 50, 54-55, 67
31976................................. 50, 54-55, 67
31978................................. 50, 54-55, 67
31989.................................................. 50
31990.................................................. 50
31991.................................................. 50
31993.................................................. 50
31995.................................................. 50
31996.................................................. 50
31998.................................................. 50
32002......... 50, 54-55, 57, 60, 64, 67, 69
32003......... 50, 54-55, 57, 60, 64, 67, 69
32004......... 50, 54-55, 57, 60, 64, 67, 69
32006......... 50, 54-55, 57, 60, 64, 67, 69
32008............... 50, 54-55, 57, 60, 67, 69
32009............... 50, 54-55, 57, 60, 67, 69
32011............... 50, 54-55, 57, 60, 67, 69
32012............................................ 51, 58
32013.................................................. 51
32014.................................................. 51
Tel: 800.435.0786
Fax: 800.524.2853
30923.................................................. 83
30925.................................................. 83
30927.................................................. 83
30929.................................................. 83
30931.................................................. 83
30935.................................................. 83
30937.................................................. 83
30968.................................................. 80
30976................................................ 130
30977................................................ 130
30978................................................ 130
30979................................................ 130
30980................................................ 130
30981................................................ 130
30998................................................ 175
31000................................................ 175
31002................................................ 175
31004................................................ 175
31006................................................ 175
31010................................................ 175
31012................................................ 175
31014................................................ 175
31024................................................ 176
31026................................................ 176
31028................................................ 176
31030................................................ 176
31032................................................ 176
31043................................................ 461
31043R.............................................. 462
31068.................................................. 48
31092................................................ 129
31093................................................ 129
311...................................................... 29
311-JAB............................................... 29
31117.................................................. 46
31119.................................................. 46
31120.................................................. 46
31122.................................................. 46
31123.................................................. 46
31124.................................................. 46
31125.................................................. 46
31126.................................................. 46
31128.................................................. 46
31129.................................................. 46
31131.................................................. 46
31132.................................................. 46
31133.................................................. 46
31135.................................................. 46
31228................................................ 130
31229................................................ 415
31274................................................ 120
31281................................................ 120
31287................................................ 120
31291.................................. 28, 188, 237
31314................................................ 139
31315................................................ 139
31339................................................ 139
31353.................................. 66, 219, 431
31395................................................ 162
31466........................................ 151, 154
31482................................................ 174
31483................................................ 174
31484................................................ 174
31486................................................ 128
31487................................................ 128
31488................................................ 128
31510................................................ 415
31518................................................ 422
31523................................................ 422
31535.................................................. 86
31536.................................................. 86
31537.................................................. 86
31539.................................................. 86
31540.................................................. 86
31541.................................................. 86
31542.................................................. 86
Tel: 800.435.0786
Fax: 800.451.2632
30363................................................ 162
3036AVBB............................................ 57
3037AV........................................... 56, 70
30384.................................................. 47
30385.................................................. 48
30387.................................................. 48
30419.................................................. 83
30423.................................................. 83
30427.................................................. 83
30429.................................................. 83
30431.................................................. 83
30433.................................................. 83
30442................................................ 175
30460................................................ 175
30462................................................ 175
30464................................................ 175
30466................................................ 175
30468................................................ 175
30470................................................ 175
30474................................................ 176
30476................................................ 176
30478................................................ 176
30480................................................ 176
30482................................................ 176
30484................................................ 176
30486................................................ 176
304AVBB............................ 49-51, 53, 54,
304AVBBP...................................... 49, 50
30502................................................ 176
30504................................................ 176
30506................................................ 176
30508................................................ 176
30536................................................ 174
30538................................................ 174
30540................................................ 174
30542................................................ 174
30544................................................ 174
30546................................................ 174
30548................................................ 174
30550................................................ 174
30552................................................ 174
30554................................................ 174
30558................................................ 175
30560................................................ 175
30562................................................ 175
30564................................................ 175
30566................................................ 175
30568................................................ 175
30570................................................ 175
30572................................................ 175
30574................................................ 175
30576................................................ 175
30578................................................ 175
30580................................................ 175
30582................................................ 175
30584................................................ 174
30586................................................ 174
30588................................................ 174
30590................................................ 174
30592................................................ 174
30594................................................ 174
30596................................................ 174
30658................................................ 176
30660................................................ 176
30662................................................ 176
30664................................................ 176
30666................................................ 176
30668................................................ 176
30758................................................ 174
30859........................................ 132, 135
30866................................................ 129
30867................................................ 129
30908................................................ 129
30915.................................................. 83
30919.................................................. 83
30921.................................................. 83
Index
28157............................................ 46, 48
28158............................................ 46, 48
28159............................................ 46, 48
28160............................................ 46, 48
28161............................................ 46, 48
28162............................................ 46, 48
28163............................................ 46, 48
28165............................................ 46, 48
28166............................................ 46, 48
28170................................................ 164
28237................................................ 435
28238................................................ 435
28239................................................ 435
28280................................................ 157
28885................................................ 121
28900................................................ 121
28901......................................... 120-121
29004................................................ 121
29014................................................ 121
29019................................................ 299
29022................................................ 121
29149................................................ 184
29209.................................................. 98
29367................................................ 132
29451.... 46-48, 61-62, 64-65, 68, 70, 77
29452........................... 46-48, 65, 68, 77
29463................................................ 119
29464................................................ 119
29465................................................ 119
29466................................................ 119
29468................................................ 119
29470................................................ 119
29472................................................ 119
29474................................................ 119
29477................................................ 119
294AVBB.............................................. 49
29528.................................................. 48
29529.................................................. 48
29536................................................ 118
29537................................................ 118
29560.................................................. 47
29563.................................................. 47
29600................................................ 161
29619.................................................. 48
29627........................................ 151, 154
29631................................................ 151
2981AV.......................... 57-58, 66-67, 69
2982AV.......................... 57-58, 66-67, 69
2983AV.......................... 57-58, 66-67, 69
2984AV.......................... 57-58, 66-67, 69
29937................................................ 119
29948................................................ 118
30005.................................................. 82
30008.................................................. 82
30043............................................ 62, 64
301.................................................... 191
30183................................................ 162
30188................................................ 162
30193................................................ 162
301A............................................ 28, 103
30206............................................. 67-69
30208................................................ 187
30216.................................................. 52
30225.................................................. 52
30227........................... 46-47, 52, 70, 77
30228.................................................. 52
30236.......................................... 58, 219
30239................................................ 121
30241.................................................. 430
30242................................................ 430
3026AV................................................. 57
30291................................................ 425
3030-013............................................. 316
30309................................................ 121
30347................................................ 162
30358................................................ 162
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Index
MADE FOR THE TRADE!™
488
32017.................................................. 55
3205AV................................................. 57
3206AV................................................. 57
3207AV........................................... 57, 59
3208AV........................................... 57, 59
32095......................................... 141-142
32104................................................ 142
32116................................................ 139
322-013....................................... 29, 103
322-018....................................... 29, 103
322-113....................................... 29, 103
322-118....................................... 29, 103
32237................................................ 104
32322................................................ 104
32336................................................ 104
32337................................................ 104
32338................................................ 104
32364................................................ 104
32398.................................................. 55
32422................................................ 142
32431................................................ 142
32432................................................ 141
32433......................................... 139-143
32489................................................ 209
32565................................................ 141
32662................................................ 142
32743................................................ 153
32799............................................. 67-68
32803.................................................. 55
32804.................................................. 60
32891................................................ 209
32913................................................ 193
32928................................................ 163
32929................................................ 163
32930................................................ 163
32935................................................ 423
33026................................................ 419
33035................................................ 423
333-1218..................................... 29, 103
333-1224..................................... 29, 103
333-1232..................................... 29, 103
33336................................................ 431
333A............................................ 29, 103
33405................................................ 419
33451................................................ 142
33454......................................... 124-125
33455................................................ 125
33456................................................ 125
33457................................................ 125
33458................................................ 125
33459......................................... 124-125
33462......................................... 124-125
33463......................................... 124-125
33515................................................ 432
33516................................................ 431
3360.......................................... 412, 417
33614......................................... 124-125
33735.......................................... 30, 102
33786.................................................. 64
33794............................................. 63-64
33901................................................ 158
33967..................... 61-62, 64, 73-74, 76
33A–1.................................................. 86
33A–1-1/2............................................ 86
33A–1-1/4............................................ 86
33A–1-1/8............................................ 86
33A–1-3/8............................................ 86
33A–1/2............................................... 86
33A–1/4............................................... 86
33A–3/4............................................... 86
33A–3/8............................................... 86
33A–5/8............................................... 86
33A–7/8............................................... 86
33AR-6................................................. 86
33L–1................................................... 86
33L–1-1/2............................................ 86
33L–1-1/4............................................ 86
33L–1-1/8............................................ 86
33L–1/2............................................... 86
33L–1/4............................................... 86
33L–3/4............................................... 86
33L–3/8............................................... 86
33L–5/8............................................... 86
33L–7/8............................................... 86
34027................................................ 139
34081................................................ 185
34084................................................ 192
34136........................................ 152, 166
34137................................ 152, 154, 166
34138........................................ 152, 166
34187................................................ 192
34188................................................ 185
34198................................................ 123
34200................................................ 122
34201................................................ 118
34202................................................ 118
34203................................................ 184
34208................................................ 120
34209................................................ 124
34210................................................ 124
34288.................................................. 64
34291............................................. 63-64
34292............................................. 63-64
34293............................................. 63-64
34299............................................. 63-64
34300............................................. 63-64
34317................................................ 142
34321................................................ 125
34329......................................... 124-125
34340......................................... 124-125
34342................................................ 125
34344......................................... 124-125
34357.................................................. 52
34358.................................................. 70
34359.................................................. 70
34360............................................. 67-68
34361............................................. 67-68
34362........................................ 152, 153
34369......................................... 431-432
34392................................................ 139
34401.................................................. 82
34403.................................................. 82
34410................................. 60, 66-69, 82
34411.................................................. 82
34418.................................................. 74
34420.................................................. 74
34421....................................... 73-74, 78
34427.................................................. 74
34429.................................................. 74
34436.................................................. 74
34437.................................................. 74
34441.................................................. 74
34442.................................................. 74
34443.................................................. 74
34444.................................................. 74
34451................................................ 398
34452................................................ 403
34470................................................ 361
3448.................................................. 417
34514................................................ 396
34523................................................ 393
34524................................................ 393
34525................................................ 399
34528................................................ 399
34529................................................ 399
34555................................................ 395
34556................................................ 399
34574................................................ 399
34727................................................ 395
34733............................................. 73-74
34757.................................................. 53
34758.................................................. 53
34941....................................... 53-54, 60
34949................................................ 102
34953.......................................... 30, 102
34980.................................................. 84
34983............................................. 63-64
34995.................................................. 85
34996............................................. 84-85
34997.................................................. 85
34A–1.................................................. 86
34A–1/2............................................... 86
34A–3/4............................................... 86
34A–3/8............................................... 86
34A–5/8............................................... 86
34A–7/8............................................... 86
34AR-6................................................. 86
35012................................................ 462
35014................................................ 462
35016................................................ 462
35043................................................ 412
35057................................................ 412
35068................................................ 414
35098................................. 153-154, 166
35100................................. 153-154, 166
35101................................. 153-154, 166
35145................................................ 102
35158................................. 50, 54-55, 64
35159..................... 50, 54-55, 57, 60, 64
35160....................................... 50, 54-55
35161........................... 50, 54-55, 57, 60
35162..................... 50, 54-55, 57, 60, 64
35163................................ 50, 54, 55, 64
35164............... 50, 54-55, 57, 59-60, 64
35165................................. 50, 54-55, 64
35166....................................... 50, 54-55
35167....................................... 50, 54-55
35168..................... 50, 54-55, 57, 60, 64
35169................................. 50, 54-55, 64
35177.................................................. 50
35178.................................................. 50
35179.................................................. 50
35180.................................................. 50
35181.................................................. 50
35182.................................................. 50
35192.................................................. 57
35193............................................ 57, 60
35196.................................................. 74
35197.................................................. 74
35198.................................................. 74
35199.................................................. 74
35200.................................................. 74
35202.................................................. 64
35207................................................ 168
35208................................................ 168
35209................................................ 168
35211................................................ 168
35212................................................ 168
35213................................................ 168
35215................................................ 168
35216................................................ 168
35217................................................ 168
35283........................................ 155, 166
35284........................................ 155, 166
35285........................................ 155, 166
353-123............................................. 101
353-156............................................. 101
353-234............................................. 101
353-318............................................. 101
353-345............................................. 101
353-418............................................. 101
353-614............................................. 101
353-618............................................. 101
353-624............................................. 101
353-646............................................. 101
353-656............................................. 101
353-804............................................. 101
353-814............................................. 101
353-818............................................. 101
353-956............................................. 101
353-966............................................. 101
353-969............................................. 101
35356.................................................. 84
35358.................................................. 84
35369................................................ 190
35400................................................ 121
35415................................................ 461
35431................................................ 461
35450................................................ 399
35455................................................ 461
35456................................................ 461
35457................................................ 461
35458................................................ 461
35459................................................ 461
3548GB.............................................. 433
35577................................................ 129
35592................................................ 129
35605................................................ 151
35611............................................. 63-64
35614............................................. 63-64
35615............................................. 63-64
35616............................................. 63-64
35617.................................................. 55
35708.................................................. 99
35711................................................ 120
35712.................................................. 99
35713.................................................. 99
35714.................................................. 99
35715.................................................. 99
35716.................................................. 99
35717.................................................. 99
35718.................................................. 99
35719.................................................. 99
35720.................................................. 99
35721.................................................. 99
35722.................................................. 99
35723.................................................. 99
35724.................................................. 99
35725.................................................. 99
35726.................................................. 99
35727.................................................. 99
35728.................................................. 99
35729.................................................. 99
35730.................................................. 99
35731.................................................. 99
35740................................................ 130
35744................................................ 134
35746................................................ 134
35747................................................ 134
35750................................................ 134
35756................................................ 367
35757................................................ 367
35758*............................................... 367
35759*............................................... 366
35760*............................................... 366
35770*............................................... 366
35771................................................ 365
35772................................................ 371
35773................................................ 371
35774................................................ 372
35775................................................ 287
35884.................................................. 82
35887................................................ 213
35889................................................ 102
35905................................................ 127
35908................................................ 134
35909................................................ 134
35919................................................ 134
35930................................................ 134
35936.................................................. 82
36000................................................ 288
36001................................................ 287
36018............................................ 54, 82
36020.................................................. 82
www.greenlee.com
CANADA
INTERNATIONAL
489
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
39115................................................ 171
39116................................................ 171
39117................................................ 171
392.................................................... 140
39243................................................ 144
39244................................................ 144
39245................................................ 144
39255................................................ 170
39257................................................ 170
39259................................................ 170
39261................................................ 170
39263................................................ 170
39265................................................ 170
39274................................................ 170
39276................................................ 170
39278................................................ 170
39280................................................ 170
39282................................................ 170
39284................................................ 170
39286................................................ 170
39288................................................ 170
39290................................................ 171
39294................................................ 171
39295................................................ 171
39296................................................ 171
39297................................................ 171
39298................................................ 171
39302................................................ 171
39303................................................ 171
39304................................................ 171
39306................................................ 171
39308................................................ 171
39660................................................ 426
39661................................................ 426
39664................................................ 426
39666................................................ 426
39780................................................ 117
39849................................................ 170
39850................................................ 170
39860.................................................. 59
39872.................................................. 92
39873.................................................. 97
39893.................................................. 97
399-14A............................................. 104
399-18A............................................. 104
399-24A............................................. 104
39902................................................ 170
39903................................................ 170
39904................................................ 170
39905................................................ 170
39913.................................................. 87
39914.................................................. 87
39971................................................ 117
3XT 36................................................. 90
3XT 54................................................. 90
3XT 72................................................. 90
4016 GB............................................. 434
4017 GB............................................. 434
4018GB.............................................. 433
40231................................................ 463
4024.................................................. 161
402K.................................................. 288
402R.................................................. 351
402T................................................... 351
4033GB.............................................. 433
4036.................................................. 161
4048.................................................. 161
405.................................................... 165
406.................................................... 165
408.................................................... 434
409.................................................... 434
412.................................................... 434
413.................................................... 434
414.................................................... 434
417.................................................... 434
418.................................................... 434
Tel: 800.435.0786
Fax: 800.524.2853
38350.................................................. 90
3836D.................................................. 87
38390.................................................. 92
38405................................................ 127
38406................................................ 127
38407................................................ 127
38408................................................ 127
38409................................................ 127
38456............................................. 68-69
38466................................................ 120
38467................................................ 120
38504.................................................. 97
38505.................................................. 97
38506.................................................. 97
38507.................................................. 97
38520............................................. 67-68
38522....................................... 95, 97-98
38522B................................................ 97
38524.................................................. 97
38526............................................. 97-98
38529.................................................. 97
38583................................................ 385
3858D.................................................. 87
38594................................................ 140
38624................................................ 139
38650................................................ 116
38659................................................ 413
38668.................................................. 87
38678.................................................. 87
38685.................................................. 90
38686.................................................. 90
38687.................................................. 90
38688.................................................. 90
38689.................................................. 90
38690.................................................. 90
38696.................................................. 90
38717................................................ 410
38718................................................ 410
38719................................................ 412
3872D.................................................. 87
38733................................................ 422
38744.................................................. 87
38745.................................................. 87
38746.................................................. 87
38750.................................................. 87
38751.................................................. 87
38752.................................................. 87
38753.................................................. 87
38756.................................................. 87
38757.................................................. 87
38758.................................................. 87
38774................................................ 422
38778................................................ 119
38780................................................ 116
38786................................................ 384
38787................................................ 384
38788................................................ 384
38789................................................ 384
38863................................................ 116
389-1014........................................... 104
389-1418........................................... 104
389-24............................................... 104
38962................................................ 116
38991.................................................. 97
390.................................................... 140
39051................................................ 140
39063................................................ 140
39106................................................ 171
39107................................................ 171
39108................................................ 171
39109................................................ 171
39110................................................ 171
39111................................................ 171
39112................................................ 171
39113................................................ 171
39114................................................ 171
Tel: 800.435.0786
Fax: 800.451.2632
37624.................................................. 97
37626.................................................. 97
37628.................................................. 97
37630.................................................. 97
37729............................ 66, 71, 219, 433
37868.................................................. 83
37869.................................................. 83
37870.................................................. 83
37871.................................................. 83
37903.................................................. 97
37909-25........................................... 143
37910-25........................................... 143
37912-25........................................... 143
37913-25........................................... 143
37917-1............................................. 143
37917-10.................... 139-140, 142-143
37918-5.............................. 139-140, 142
37919-5............................................. 143
37920-5...................... 139-140, 142-143
37921-5.............................. 139-140, 142
37922-5............................................. 143
37923-5...................... 139-140, 142-143
37959................................................ 143
38067.................................................. 88
38068.................................................. 88
38069.................................................. 88
38072.................................................. 88
38073.................................................. 88
38074.................................................. 88
38077.................................................. 88
38078.................................................. 88
38079.................................................. 88
38082.................................................. 88
38083.................................................. 88
38084.................................................. 88
38087.................................................. 88
38088.................................................. 88
38089.................................................. 88
38092.................................................. 88
38093.................................................. 88
38094.................................................. 88
38097.................................................. 88
38098.................................................. 88
38099.................................................. 88
38102.................................................. 88
38103.................................................. 88
38104.................................................. 88
38112.................................................. 88
38113.................................................. 88
38114.................................................. 88
38117.................................................. 88
38118.................................................. 88
38119.................................................. 88
38122.................................................. 88
38123.................................................. 88
38124.................................................. 88
38128.................................................. 88
38129.................................................. 88
3812D.................................................. 87
38133.................................................. 88
38134.................................................. 88
38148................................................ 116
3824D.................................................. 87
38316.................................... 48, 71, 433
38324.................................................. 92
38325.................................................. 92
38326.................................................. 92
38327.................................................. 92
38328.................................................. 92
38329.................................................. 92
38330.................................................. 92
38331.................................................. 92
38332.................................................. 92
38333.................................................. 92
38334.................................................. 92
38336.................................................. 92
Index
36022.................................................. 82
36169.................................................. 95
36170.................................................. 95
36171.................................................. 50
36172.................................................. 50
36173............................................ 50, 57
36278............................................. 49-50
36279......... 50, 54-55, 57, 60, 64, 67, 69
36282................................ 57, 60, 69, 71
36284........................... 50, 54-55, 64, 67
36296................................................ 115
36301................................................ 102
36313................................................ 432
36314................................................ 432
36402.................................................. 82
36414.................................................. 82
3648.......................................... 411, 417
36489............................................ 46, 48
36490............................................ 46, 48
36506.................................................. 57
36508.................................................. 50
36587................................................ 429
3660.......................................... 411, 417
36617.................................................. 80
36640.................................................. 83
36642.................................................. 83
36643.................................................. 83
36659.................................................. 83
36662.................................................. 83
36664.................................................. 83
36685............................................ 54, 60
36687.................................................. 60
36688.................................................. 60
36689.................................................. 60
36690.................................................. 54
36691.................................................. 54
36692.................................................. 54
36693.................................................. 54
36697................................................ 115
36745................................................ 423
36882...................................... 57, 60, 69
36910.................................................. 57
36924................................................ 385
36925................................................ 385
36926................................................ 385
36927................................................ 385
36928......................................... 384-385
36929......................................... 384-385
36930......................................... 384-385
37103.................................................. 71
37154............................................ 95, 97
37154B................................................ 97
37155....................................... 95, 97-98
37155B................................................ 97
37156....................................... 95, 97-98
37156B................................................ 97
37157....................................... 95, 97-98
37157B................................................ 97
37186................................................ 429
37187................................................ 429
37202................................................ 424
37218................................................ 424
37279........................................ 112, 117
37281................................................ 118
37282................................................ 118
373-T123........................................... 102
373-T234........................................... 102
373-T345........................................... 102
373-TVAR........................................... 102
373-U123........................................... 102
373-U234........................................... 102
373-U300........................................... 102
373-U345........................................... 102
37600............................................ 9, 221
37614.......................................... 71, 433
37623.................................................. 97
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Index
MADE FOR THE TRADE!™
490
41834................................................ 433
41877................................................ 433
41941................................................ 433
421.................................................... 434
422.................................................... 434
4236AV................................................. 85
430.................................................... 143
430-500............................................. 143
431.................................................... 143
434.................................................... 144
435.................................................... 144
437AV................................................... 57
438-5H............................................... 132
438AV................................................... 57
439-1................................................. 135
439-2.................................. 132-133, 135
439AV........................................ 57-58, 69
440AV............... 49-53, 55, 57-58, 62, 64,
440AVP............................................ 49-50
441-2................................................. 162
441-2-1/2.......................................... 162
441-3................................................. 162
441-3-1/2.......................................... 162
441-4................................................. 162
441-5................................................. 162
441-6................................................. 162
441AV........................................ 57-58, 69
442AV............... 49-53, 55, 57-58, 62, 64,
442AVP........................................... 49, 50
4435.................................................. 144
4436.................................................. 144
4437.................................................. 144
445..................................... 152-153, 159
4451AV............................................... 105
4457AV............................................... 105
44999................................................ 209
450.................................................... 166
45000............................................ 9, 221
45001................................................ 445
45004................................................ 446
45019................................................ 220
45020................................................ 220
45039.............................................. , 243
45040........................................ 243, 353
45055................................................ 296
451.................................................... 166
452.................................................... 166
45206........................................ 181, 186
45206I................................................ 186
45207........................................ 181, 186
45207I................................................ 186
45211................................................ 186
45212................................................ 186
45218................................................ 186
45228................................................ 186
45240................................................ 195
45241................................................ 195
45242................................................ 195
45272................................................ 350
45276................................................ 294
45277................................................ 186
45281................................................ 186
45282................................................ 186
45297................................................ 186
45300................................................ 275
45306................................................ 275
45315................................................ 251
45316................................................ 251
45321................................................ 251
45322................................................ 251
45323........................................ 251, 351
45324................................ 251, 350, 353
45325................................................ 251
45326........................................ 251, 254
45327................................................ 251
45328................................................ 251
45333................................................ 183
45334................................................ 183
45378................................................ 183
45379................................................ 183
45380................................................ 183
45381................................................ 183
45382................................................ 183
45383................................................ 183
45466................................................ 350
45467................................................ 351
45468................................................ 351
45469................................................ 352
45470................................................ 352
45471................................................ 353
45472................................................ 353
45473................................................ 354
45476................................................ 350
45477................................................ 351
45478................................................ 351
45479................................................ 352
45480........................................ 239, 265
45481........................................ 351, 353
45482......................................... 350-354
45485................................................ 352
45486................................................ 353
45487................................................ 354
455............................................ 156, 166
45504................................ 222, 265, 272
45516................................. 350-351, 353
45517................................................ 246
45518................................................ 246
45541................................................ 265
45545................................................ 273
45553................................................ 265
45556................................................ 273
45557................................................ 273
45558................................................ 273
45559................................................ 273
45562................................................ 273
45563................................................ 273
45566................................................ 265
45574................................................ 273
45575................................. 265, 351-353
45576........................................ 243, 251
45577........................ 243, 252, 351, 353
45578......................... 244, 251, 350-351
45579......................... 244, 265, 350-353
45580................................................ 244
45581................................................ 244
45582................................................ 273
45586.............................................. , 355
45589................................. 276, 354-355
45593......................................... 354-355
45598.............................................. , 279
45599................................. 279, 354-355
456............................................ 156, 166
45612................................. 279, 354-355
45637................................. 278, 354-355
45639................................................ 355
45644................................................ 354
45651................................. 280, 354-355
45655................................................ 354
45656................................................ 280
45658................................................ 355
45667................................................ 244
45677........................................ 244, 251
45726................................................ 252
45727................................................ 252
45728................................................ 252
45730................................................ 252
45731................................................ 252
45732................................................ 252
45733................................................ 252
45734................................................ 251
45735................................................ 251
45737................................................ 265
45738................................................ 265
45739................................................ 265
45740................................................ 265
45742................................................ 265
45743................................................ 265
45744................................................ 265
45745................................................ 265
45747................................................ 265
45748................................................ 251
45749................................................ 251
45750................................................ 265
45751................................. 265, 352-353
45753................................................ 265
45755................................................ 265
45756................................................ 265
45758................................................ 265
45760................................. 265, 351-353
45770................................................ 265
45771................................................ 265
45773................................................ 265
45775................................................ 265
45776................................................ 265
45778................................................ 265
45780................................................ 265
459.................................................... 163
46010........................................ 261, 350
46020........................................ 261, 350
46021........................................ 261, 350
46022................................. 261, 350-354
46023................................. 261, 350-354
46024........................................ 261, 350
46025................................................ 261
46026................................................ 261
46040........................................ 298, 354
46050................................................ 298
46060................................................ 294
46065................................................ 294
46070................................................ 294
462 1................................................. 435
462 B................................................. 435
462 Q................................................. 435
46241................................................ 254
46242................................................ 254
46243.............................................. , 254
463 1................................................. 435
463 Q................................................. 435
4640AV................................................. 57
4641AV................................................. 57
46500.......................... 33, 138, 350, 354
46503................................................ 138
46533.......................................... 33, 138
46534.......................................... 33, 138
467.................................................... 435
46800................................ 252, 273, 351
46801................. 251, 273, 350-351, 353
46808................................................ 273
46824........................................ 273, 353
46826................................................ 273
46830................................................ 273
468R.................................................. 352
468T................................................... 352
4717AV............................................... 105
47439................................................ 354
4872.......................................... 412, 417
4872R........................................ 412, 417
48788......................................... 203-204
488-2................................................. 163
488-3................................................. 163
48802......................................... 203-204
48820......................................... 203-204
48824......................................... 203-204
489.................................................... 163
49981................................................ 310
49986................................................ 285
49987................................................ 285
49989................................................ 287
49990................................................ 287
49991................................................ 281
49992................................................ 281
49993................................................ 281
4XT 36................................................. 90
4XT 54................................................. 90
4XT 72................................................. 90
50005.................................................. 57
50006.................................................. 57
50008.................................................. 57
50010................................................ 462
50012................................................ 462
50013................................................ 183
50015................................................ 183
50017................................................ 183
50032................................................ 459
50042................................................ 459
50049................................................ 457
50063................................................ 459
500CA........................................ 334, 389
501..................................... 334, 388-389
501R.......................................... 334, 389
501T........................................... 334, 389
50283................................................ 119
503............................................ 417, 423
50302......................... 121-124, 160-162
50303........................................ 419, 422
50386................................................ 433
504.................................................... 172
50423................................................ 105
5052B2K............................................ 319
5052B3K............................................ 319
5052B6K............................................ 319
5052BE2............................................ 319
5052BIU............................................. 319
5060MESH......................................... 414
50642.................................................. 71
50700................................................ 160
50753............................................ 84, 90
50765.................................................. 84
50806................................................ 434
50807................................................ 433
50823................................................ 433
50848................................................ 119
508S.................................. 335, 388, 390
508SR........................................ 335, 390
508ST........................................ 335, 390
50954................................................ 157
50962.................................................. 84
50975................................................ 121
51059................................................ 434
510LS.......................................... 323-324
51185................................................ 121
51208................................................ 172
5123.................................................. 396
51376............................................. 84-85
5137AV................................................. 57
5138AV................................................. 57
51434................................................ 161
51488................................................ 420
5152B2K............................................ 319
5152B3K............................................ 319
5152B6K............................................ 319
5152BE2............................................ 319
5152BIU............................................. 319
51593................................................ 121
51674................................................ 121
52000................................................ 459
52005................................................ 458
52010R.............................................. 459
52011................................................ 459
52015................................................ 459
52016................................................ 459
52025978.......................................... 417
52025979.......................................... 417
52030................................................ 459
www.greenlee.com
CANADA
INTERNATIONAL
491
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
55498.................................................. 23
55499.................................................. 23
55500.................................................. 23
55501.................................................. 23
555B................................... 320-321, 332
555C.................................................. 117
555EC................................................ 117
555IC................................................. 117
555R-22............................................. 117
555RC................................................ 117
556MT................................. 320-321, 332
557B.......................... 317, 320, 322, 332
558B.................................. 320, 322, 332
56051................................................ 443
560XL......................................... 310, 332
56288................................................ 188
562K-101........................................... 333
562K-105........................................... 333
562K-106........................................... 333
56300.................................................... 9
56303.................................................. 11
56304.................................................. 12
56305.................................................. 12
56310.................................................. 15
56311.................................................. 19
56312.................................................. 19
56313.................................................. 19
56314.................................................. 19
56315.................................................. 19
56316.................................................. 19
56317.................................................. 19
56318.................................................. 19
56319.................................................. 20
56320.................................................. 21
56321.................................................. 21
56322.................................................. 21
56323.................................................. 22
56325.................................................. 25
56326.................................................. 25
56327.................................................. 25
56328.................................................. 25
56329.................................................. 25
56332.................................................. 25
56333.................................................. 25
56334.................................................. 34
56335.................................................. 35
56336.................................................. 35
56337.................................................. 37
56338.................................................. 39
56339.................................................. 37
56340.................................................. 37
56341.................................................. 38
56342.................................................. 39
56343.................................................. 39
56344.................................................. 39
56347.................................................. 38
56348.................................................. 38
56349.................................................. 40
56350.................................................. 40
56351.................................................. 41
56352.................................................. 42
56358................................................ 154
56359................................................ 154
56362................................................ 156
563K-101........................................... 333
563K-105........................................... 333
563K-106........................................... 333
56511................................................ 443
56512................................................ 444
5660L......................................... 413, 417
5660LH...................................... 413, 417
566K-101........................................... 333
566K-105........................................... 333
566K-106........................................... 333
5670-FC............................................. 312
5670-SC............................................. 312
Tel: 800.435.0786
Fax: 800.524.2853
54303................................................ 119
54333.................................................. 90
54644.................................................. 12
54645.................................................. 12
54646.................................................. 12
54647.................................................. 12
54648.................................................. 13
54649.................................................. 13
54650.................................................. 13
54651.................................................. 13
54652.................................................. 13
54653.................................................. 13
54654.................................................. 13
54655.................................................. 13
54656.................................................. 14
54657.................................................. 13
54658.................................................. 14
54659.................................................. 14
54660.................................................. 14
54661.................................................. 12
54664.................................................. 17
54665.................................................. 17
54666.................................................. 17
54667.................................................. 17
54668.................................................. 17
54669.................................................. 17
54670.................................................. 17
54671.................................................. 16
54672.................................................. 26
54673.................................................. 26
54674.................................................. 26
54675.................................................. 26
54676.................................................. 26
54677.................................................. 26
54678.................................................. 26
54679.................................................. 26
54688.................................................. 18
54689.................................................. 18
54691.................................................. 18
54693.................................................. 18
54695.................................................. 18
54696.................................................. 20
54697.................................................. 20
54698.................................................. 34
54701.................................................... 4
54702.................................................... 4
54707.................................................... 7
54709.................................................... 7
54717.................................................... 6
54718.................................................... 6
54719.................................................... 6
54729.................................................. 28
54736.................................................... 5
54737.................................................... 5
54738.................................................... 5
54739.................................................... 5
54740.................................................... 5
54744.................................................... 7
54997................................................ 417
54998................................................ 417
55090E............................................... 459
55091E............................................... 459
55095E............................................... 459
55124................................................ 417
55225.................................................. 91
55294................................................ 417
55316.................................................. 79
55456................................................ 324
55482.................................................. 22
55483.................................................. 21
55484.................................................. 21
55485.................................................. 21
55494.................................................. 23
55495.................................................. 23
55496.................................................. 23
55497.................................................. 23
Tel: 800.435.0786
Fax: 800.451.2632
52133................................................ 184
52134................................................ 188
52135................................................ 188
52136................................................ 188
52137................................................ 188
52138................................................ 188
52139................................................ 189
52140................................................ 189
52141................................................ 189
52142................................................ 189
52143................................................ 189
52144............................................. 84-85
52150................................................ 203
52151................................................ 203
52152................................................ 203
52154................................................ 203
52155.................................................. 61
52156.................................................. 61
52157.................................................. 61
52158.................................................. 61
52159.................................................. 61
52160.................................................. 61
52161.................................................. 61
52162.................................................. 61
52163.................................................. 61
52164.................................................. 61
52176....................... 179, 184, 191, 194,
52177....................... 182, 188, 189, 197,
52178........................ 182, 184, 188-189,
52179................ 179, 182, 184, 188-189,
52180........................ 182, 184, 188-189,
52191................................................ 214
52192................................................ 214
521A.................................. 336, 388, 391
521R.......................................... 336, 391
521T........................................... 336, 391
52284................................................ 419
52285................................................ 419
522B.......................................... 320, 332
522B-HP..................................... 320, 332
52352................................................ 172
523B-13/15................................ 317, 332
52466................................................ 423
525-30............................................... 310
525-30-PCX....................................... 310
525-60............................................... 309
525-60-APC....................................... 309
525-60-PCX....................................... 309
525-60RL-APC................................... 309
525-90............................................... 308
52500................................................ 444
52867................................................ 119
53014................................................ 121
53259................................................ 420
53389................................................ 117
53824................................................ 121
53892.................................................. 84
53904................................................ 417
53950................................................ 417
53951................................................ 417
540-12............................................... 136
540-15............................................... 136
540-18............................................... 136
540-20P............................................. 136
540-24............................................... 136
540-6................................................. 136
540-8M.............................................. 136
54167.................................... 48, 66, 433
54168.................................... 48, 66, 433
54169.............................. 48, 66, 71, 433
54170.............................. 48, 66, 71, 433
542-200............................................. 134
542-250............................................. 134
54274............................................ 91, 92
54284................................................ 140
54295.................................................. 92
Index
52031................................................ 459
52037................................................ 179
52038................................................ 179
52039................................................ 179
52040........................................ 179, 459
52041........................................ 179, 459
52042................................................ 459
52043................................................ 200
52044................................................ 200
52045................................................ 200
52046................................................ 200
52047................................................ 200
52048................................................ 208
52049................................................ 208
52050................................................ 208
52051................................................ 208
52052................................................ 208
52053................................................ 206
52054................................................ 206
52055................................................ 206
52056................................................ 206
52057................................................ 206
52058................................................ 206
52059................................................ 206
52060................................................ 206
52061................................................ 206
52062................................................ 206
52063................................................ 206
52064................................................ 206
52065................................................ 206
52066................................................ 206
52067................................................ 206
52068................................................ 200
52069................................................ 200
52070................................................ 200
52071................................................ 200
52072................................................ 200
52079................................................ 221
52080................................................ 221
52081................................................ 221
52082................................................ 221
52083................................................ 221
52084................................................ 199
52085................................................ 199
52086................................................ 199
52087................................................ 199
52088................................................ 199
52089................................................ 197
52090................................................ 197
52091................................................ 197
52092................................................ 197
52101................................................ 197
52102................................................ 198
52103................................................ 198
52104................................................ 198
52105................................................ 198
52106................................................ 198
52107................................................ 182
52108................................................ 182
52116................................................ 182
52117................................................ 182
52118................................................ 182
52119................................................ 194
52120................................................ 194
52121................................................ 194
52122................................................ 194
52123................................................ 194
52124................................................ 191
52125................................................ 191
52126................................................ 191
52127................................................ 191
52128................................................ 191
52129................................................ 184
52130........................................ 184, 198
52131................................................ 184
52132................................................ 184
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Index
MADE FOR THE TRADE!™
492
5670-ST............................................. 312
5680-FC............................................. 313
5680-SC............................................. 313
5680-ST............................................. 313
5685004............................................ 459
5687504............................................ 459
5690-FC............................................. 313
5690-SC............................................. 313
5690-ST............................................. 313
56E2-101........................................... 333
56E2-105........................................... 333
56E2-106........................................... 333
56LC-LFM.......................................... 333
56LC-LM5.......................................... 333
56LC-LM6.......................................... 333
56MU-LFM......................................... 333
56MU-LM5......................................... 333
56MU-LM6......................................... 333
5708.......................................... 393, 407
5708-C............................................... 393
5708i.......................................... 393, 407
5708i-C.............................................. 393
570XL................................................. 332
570XL-FC........................................... 311
570XL-SC........................................... 311
570XL-ST........................................... 311
5710.................................................. 399
5712.................................................. 395
5713.................................................. 399
5715.................................................. 399
5723.................................................. 407
572J-101........................................... 333
5760TD...................................... 413, 417
57684................................................ 302
57691................................................ 301
576J-101........................................... 333
5778.......................................... 394, 395
5778-C............................................... 395
5778TL............................................... 395
5779.......................................... 396, 407
578.................................................... 171
5783.................................................. 399
5786.................................................. 399
579............................................ 171, 445
57E8-101........................................... 333
57LC-LFM.......................................... 333
57LC-LM5.......................................... 333
57LC-LM6.......................................... 333
57MU-LFM......................................... 333
57MU-LM5......................................... 333
57MU-LM6......................................... 333
580XL................................................. 332
580XL-FC........................................... 311
580XL-SC........................................... 311
580XL-ST........................................... 311
58182........................................ 438, 464
5860.......................................... 414, 417
5878.................................................. 406
58799................................................ 302
5880.................................................. 406
5880-C............................................... 395
58805................................................ 302
5882.................................................. 406
5882-C............................................... 395
5890-FC............................................. 313
5890-SC............................................. 313
5890-ST............................................. 313
590.................................................... 142
591............................................. 141-142
592..................................... 141-142, 445
595..................................... 139, 141-143
597............................................ 174, 445
598.................................................... 174
599.................................................... 174
5990.................................................. 394
59912................................................ 444
60001.................................................. 73
60002.................................................. 73
60003.................................................. 73
60005.................................................. 73
60006.................................................. 73
6001........................... 148-149, 151, 154
6001-22..................................... 151, 154
60016.................................................. 73
60017.................................................. 73
60018.................................................. 73
60019.................................................. 73
60020.................................................. 73
60021.................................................. 73
60023.................................................. 73
60024.................................................. 73
60025.................................................. 74
60026.................................................. 74
60027.................................................. 74
60029.................................................. 74
60030.................................................. 74
60031.................................................. 74
60032.................................................. 74
60033.................................................. 74
60034.................................................. 74
60035.................................................. 74
60036.................................................. 74
60037.................................................. 74
60038.................................................. 74
60039.................................................. 74
6004.................................. 149, 151, 154
60040.................................................. 74
60041.................................................. 74
60042.................................................. 74
60043.................................................. 74
60045.................................................. 74
60046.................................................. 74
60047.................................................. 74
60048.................................................. 74
60049.................................................. 74
6005.................................. 149, 151, 154
60050.................................................. 74
60051.................................................. 74
60052.................................................. 74
60053.................................................. 74
60054.................................................. 74
60055.................................................. 74
60056.................................................. 74
60057.................................................. 74
60058.................................................. 74
60059.................................................. 74
60060.................................................. 74
60061.................................................. 74
60062.................................................. 74
60063.................................................. 74
60064.................................................. 74
60065.................................................. 74
60066.................................................. 74
60067.................................................. 74
60068.................................................. 74
60069.................................................. 74
60070.................................................. 74
60071.................................................. 74
60072.................................................. 74
60073.................................................. 74
60074.................................................. 74
60075.................................................. 74
60076.................................................. 74
60077.................................................. 73
60078.................................................. 73
60079.................................................. 73
60098.................................................. 73
600CS................................................ 283
600LS................................................. 283
60101.................................................. 72
60102.................................................. 72
60103.................................................. 72
60104.................................................. 72
60105.................................................. 72
60106.................................................. 72
60107.................................................. 72
60108.................................................. 72
60109.................................................. 72
60110.................................................. 72
60111.................................................. 72
60112.................................................. 72
60114....................................... 72-74, 76
60115....................................... 72-74, 78
60116.................................................. 78
60117...................................... 72,-74, 78
60118....................................... 73-74, 78
60120............................................. 72-74
60165............................................. 72-74
60166....................................... 72-73, 78
60167............................................. 72-74
60168.................................................. 73
60169.................................................. 73
60170.................................................. 73
60171.................................................. 73
60172.................................................. 73
60173.................................................. 73
60174.................................................. 73
60175.................................................. 73
60176.................................................. 73
60177.................................................. 73
60178.................................................. 73
60179.................................................. 73
601K-G............................................... 287
60200................................................ 465
60201................................................ 465
60234.................................................. 73
60235............................................. 73-74
60237.................................................. 50
60238.................................................. 72
60239.................................................. 72
60242.................................................. 72
60243.................................................. 72
60246.................................................. 50
60249.................................................. 72
60250.................................................. 72
60258............................................. 72-74
60287.................................................. 73
60288.................................................. 73
60289.................................................. 73
60298................................................ 297
60299................................................ 297
603.................................... 153, 417, 423
60351........................................ 334, 389
60352........................ 334, 336, 389, 391
60353........................................ 334, 389
60354........................................ 334, 389
60355........................................ 334, 389
60357........................................ 335, 390
60358........................................ 335, 390
6036.................................................. 161
60360........................................ 335, 390
60361........................................ 335, 390
60362........................................ 336, 391
60363........................................ 335, 390
60364........................................ 335, 390
60366........................................ 335, 390
60367........................................ 335, 390
60368........................................ 336, 391
6037.................................................. 151
60374................................................ 288
60376................................................ 351
60377................................................ 351
60378................................................ 288
60379................................................ 352
60380................................................ 352
60381................................................ 294
604.................................................... 143
60466................................................ 287
60467................................................ 286
60482........................................ 335, 390
60487................................. 296, 353-354
60489................................................ 296
60492................................................ 296
60493................................................ 296
605.................................................... 143
60511................................................ 296
60520................................................ 305
60522................................................ 306
60525................................................ 303
60526................................................ 302
60527................................................ 303
6052B2K............................................ 317
60530................................................ 325
60531................................................ 326
60533................................................ 326
60536................................................ 326
60538................................................ 323
60539................................................ 323
60548................................................ 320
60549................................................ 320
60550................................................ 317
60552................................................ 321
60553................................................ 322
60555................................................ 319
60556................................................ 282
60556MT............................ 317, 319, 332
60557................................................ 285
60559................................................ 290
60560................................................ 282
60561................................................ 286
60564................................................ 327
60565................................................ 328
60566................................................ 324
60567................................................ 321
60568................................................ 322
60570................................................ 280
60571................................................ 280
60571......................................... 314-315
60572................................................ 329
60573................................................ 330
60574................................................ 330
60575................................................ 330
60576................................................ 329
60576MT.................................... 319, 332
60577................................................ 330
60579................................................ 328
60583................................................ 283
60585................................................ 329
60586................................................ 329
60587................................................ 329
60588................................................ 329
60589................................................ 330
60590................................................ 329
60591................................................ 330
60592................................................ 329
60593................................................ 330
60594................................................ 330
60595................................................ 329
60596................................................ 330
60597................................................ 329
60598................................................ 329
60599................................................ 329
606.................................................... 143
60600................................................ 329
60601................................................ 330
60602................................................ 330
60603................................................ 330
60604................................................ 330
60605................................................ 330
60605................................................ 330
60606................................................ 330
60607................................................ 318
60608................................................ 318
60609................................................ 318
www.greenlee.com
CANADA
INTERNATIONAL
493
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
6805.................................................. 152
6805-22............................................. 152
6805a................................................. 149
6805A......................................... 149-150
6805a-22........................................... 149
6805A-22.................................... 149-150
6805B........................................ 149, 152
6805B-22................................... 149, 152
6810-22............................................. 146
683.................................................... 425
684............................................. 425-426
687.................................................... 425
690.................................................... 139
69001................................................ 463
69002................................................ 463
691.................................................... 141
69480................................................ 463
695.................................................... 121
69506NT............................................ 463
69550................................................ 463
696.................................................... 417
69635NTF.......................................... 463
697.................................................... 417
70007B.............................................. 458
70007X.............................................. 458
70010................................................ 458
70011................................................ 458
70012................................................ 458
70013................................................ 458
70015................................................ 456
70017B....................................... 456-457
70017D....................................... 456-457
70018................................................ 458
70020................................................ 458
70021................................................ 458
70027................................................ 456
70029................................................ 456
70030................................................ 457
70040........................................ 440, 458
70041......................................... 456-457
70045........................................ 440, 458
70046D.............................................. 458
70051D.............................................. 458
70054................................................ 458
70056D.............................................. 457
70057D.............................................. 457
70060................................................ 458
70061D.............................................. 458
70065................................................ 457
70075................................................ 460
700C.......................................... 290, 391
70105................................................ 456
70115................................................ 455
70116................................................ 455
70142................................................ 457
70143................................................ 457
70150................................................ 454
70151................................................ 454
70152................................................ 454
70153................................................ 454
70154................................................ 454
70155................................................ 454
70156................................................ 454
70157................................................ 454
70159................................................ 455
70160................................................ 455
70161................................................ 455
70162................................................ 455
70163................................................ 455
70164................................................ 455
70166................................................ 455
70167................................................ 455
701K-G............................................... 287
701K-G/6A......................................... 287
70235................................................ 455
70240................................................ 460
Tel: 800.435.0786
Fax: 800.524.2853
62PTS–3/4........................................... 83
62PTS–5/8........................................... 83
62PTS–7/8........................................... 83
63004................................................ 443
63005................................................ 443
63006................................................ 444
635...................................................... 92
639.................................................... 160
64001................................................ 461
64002................................................ 461
64004................................................ 461
64350................................................ 444
644.................................................... 165
645–001.............................................. 91
645–002.............................................. 91
645–011.............................................. 91
645–022.............................................. 91
645–1-1/16.......................................... 91
645–1-1/2............................................ 91
645–1-1/4............................................ 91
645–1-1/8............................................ 91
645–1-3/4............................................ 91
645–1-3/8............................................ 91
645–1-5/16.......................................... 91
645–1-7/16.......................................... 91
645–1-7/32.......................................... 91
645–11/16........................................... 91
645–13/16........................................... 91
645–2-1/2............................................ 91
645–2-1/4............................................ 91
645–2-1/8............................................ 91
645–2-3/8............................................ 91
645–2-5/8............................................ 91
645–3.................................................. 91
645–3/4............................................... 91
645–5/8............................................... 91
645–7/8............................................... 91
646.................................................... 142
647............................................. 425-426
650.................................................... 160
6500.................................................. 150
6500-22............................................. 150
65008................................................ 447
6501................................... 148-150, 153
6501-22.............................. 149-150, 153
65013................................................ 447
65018................................. 439-440, 447
6503................................... 149-150, 153
650391700........................................ 305
6505................................... 149-150, 153
6505-22.............................. 149-150, 153
651.................................................... 151
652.................................................... 160
653.................................................... 160
654..................................... 152-153, 165
655...................................................... 91
660...................................................... 91
668.................................................... 423
66PT–1................................................ 83
66PT–1-1/4.......................................... 83
66PT–1-1/8.......................................... 83
66PT–1/2............................................. 83
66PT–11/16......................................... 83
66PT–13/16......................................... 83
66PT–15/16......................................... 83
66PT–3/4............................................. 83
66PT–5/8............................................. 83
66PT–7/8............................................. 83
678.................................................... 171
6800................................... 148-150, 152
6800-22.............................. 149-150, 152
6801................................... 149-150, 152
6802.......................................... 149, 152
6802-22............................................. 149
6803........................................... 149-150
6803B......................................... 149-152
Tel: 800.435.0786
Fax: 800.451.2632
60768................................................ 337
60769................................................ 337
60770................................................ 337
60771................................................ 337
60772................................................ 337
60773................................................ 337
60774................................................ 337
60775................................................ 337
60776................................................ 337
60777................................................ 284
60785................................................ 297
60798................................................ 336
608.................................................... 142
608-5................................................. 142
60807................................................ 248
60853................................................ 303
60887................................................ 286
609.................................................... 142
609-5................................................. 142
60A-1................................................... 84
60A-3/4.......................................... 84, 89
60A-5/8................................................ 84
60A-7/8................................................ 84
61/62PTS–1-1/4................................... 83
61/62PTS–1-1/8................................... 83
610.................................................... 142
610-5................................................. 142
61004.................................................. 73
61007.................................................. 73
61010.................................................. 73
61013.................................................. 73
61028.................................................. 74
61080.................................................. 73
61083.................................................. 73
61086.................................................. 73
61089.................................................. 73
61092.................................................. 73
61095.................................................. 73
611.................................................... 142
61125.................................................. 73
612.................................................... 142
612-2................................................. 142
613.................................................... 142
614.................................................... 142
615.................................................... 142
616.................................................... 142
617.................................................... 142
618..................................... 139, 141-142
619..................................... 139, 141-142
61PTS–1.............................................. 83
61PTS–3/4........................................... 83
61PTS–5/8........................................... 83
61PTS–7/8........................................... 83
620K.................................................. 289
621.................................................... 142
622.................................................... 142
623.................................................... 142
624.................................................... 172
624L................................................... 172
624S.................................................. 172
625–001.............................................. 92
625–002.............................................. 92
625–1-1/2............................................ 92
625–1-1/4............................................ 92
625–1-1/8............................................ 92
625–1-3/4............................................ 92
625–1-3/8............................................ 92
625–1-7/32.......................................... 92
625–13/16........................................... 92
625–2-1/2............................................ 92
625–3/4............................................... 92
625–7/8............................................... 92
629.................................................... 172
62PTS–1.............................................. 83
62PTS–11/16....................................... 83
62PTS–13/16....................................... 83
Index
60610................................................ 318
60611................................................ 318
60614................................................ 318
60615................................................ 318
60616................................................ 318
60617................................................ 318
60618................................................ 318
60623................................................ 319
60624................................................ 319
60625................................................ 319
60626................................................ 319
60627................................................ 319
60631................................................ 319
60632................................................ 319
60633................................................ 319
60634................................................ 319
60635................................................ 319
60658................................................ 333
60659................................................ 333
60660................................................ 333
60661................................................ 333
60662................................................ 333
60663................................................ 333
60664................................................ 333
60665................................................ 333
60666................................................ 333
60667................................................ 333
60668................................................ 333
60669................................................ 333
60670................................................ 333
60671................................................ 333
60672................................................ 333
60673................................................ 333
60674................................................ 333
60675................................................ 333
60680................................................ 333
60681................................................ 333
60682................................................ 333
60684................................................ 328
60686.......... 318-319, 321-323, 325-328
60687................................................ 330
60689................................................ 280
60690................................................ 280
60691................................................ 280
60692................................................ 280
60692......................................... 314-315
60694................................................ 331
60695................................................ 331
60696................................................ 331
60697................................................ 329
60698................................................ 329
60699................................................ 329
606AS.................................................. 90
607.................................................... 143
60700................................................ 329
60701................................................ 329
60702................................................ 330
60703................................................ 329
6072.................................................. 162
60727................................................ 319
60733................................................ 333
60734................................................ 333
60735................................................ 333
60736................................................ 333
60737................................................ 333
60738................................................ 333
60740................................................ 306
60751.......................................... 302-303
60752......................................... 302-303
60754................................................ 305
60755................................................ 307
60756................................................ 306
60764................................................ 305
60765................................................ 337
60766................................................ 337
60767................................................ 337
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Index
MADE FOR THE TRADE!™
494
70241................................................ 460
70243................................................ 456
70244................................................ 456
70245................................................ 456
70246................................................ 456
70247................................................ 456
70285................................................ 459
70286................................................ 459
70289................................................ 460
70296................................................ 460
703.................................................... 417
704.................................................... 181
705.................................................... 181
70521................................................ 454
70522................................................ 454
70522D.............................................. 454
70523................................................ 454
70531................................................ 454
70532................................................ 454
70533................................................ 454
70558................................................ 454
706.................................................... 181
70614................................................ 439
70615................................................ 463
70716................................................ 448
70752................................................ 448
70753........................................ 440, 447
70840X.............................................. 439
70849X.............................................. 441
70850X.............................................. 441
709...................................................... 80
70901X.............................................. 439
70903X.............................................. 439
70905X.............................................. 439
70907X.............................................. 441
70908X.............................................. 441
70912X.............................................. 441
70913X.............................................. 441
70914X.............................................. 441
70915X.............................................. 441
70916X.............................................. 441
70917X.............................................. 441
70918X.............................................. 441
70919X.............................................. 441
70920X.............................................. 441
70921X.............................................. 441
70945X.............................................. 441
70946X.............................................. 441
70PT-11/16.......................................... 84
70PT-13/16.......................................... 84
70PT-15/16.......................................... 84
710...................................................... 80
71019................................................ 457
711C.................................................... 80
711CS................................................ 290
711M.................................................... 80
71259................................................ 440
71259L............................................... 440
71271................................................ 440
71272................................................ 439
71273......................................... 439-440
71279................................................ 440
71280................................................ 440
712A100.............................................. 80
712A1000............................................ 80
713...................................................... 79
71453................................................ 440
718F........................................... 181, 187
718HL........................................ 181, 187
71945.................................................. 29
71BB.................................................... 57
71PT-11/16.......................................... 84
71PT-13/16.......................................... 84
71PT-15/16.......................................... 84
720...................................................... 72
721-1.......... 50-53, 55, 62, 64, 66-67, 70
721-1-1/2... 50-53, 55, 62, 64, 66-67, 70
721-1-1/2P.......................................... 50
721-1-1/4.................... 50-53, 55, 62, 64,
721-1-1/4P.......................................... 50
721-1/2........................ 50-55, 58, 62, 64,
721-1/2P.............................................. 50
721-1P................................................. 50
721-2........................... 50-53, 55, 62, 64,
721-2P................................................. 50
721-3/4........................ 50-53, 55, 62, 64,
721-3/4P.............................................. 50
721–1-1/4............................................ 51
72101................................................ 464
72112................................................ 464
7211BB-1............................................. 50
7211BB-1-1/2...................................... 50
7211BB-1-1/4...................................... 50
7211BB-1/2.......................................... 50
7211BB-2............................................. 50
7211BB-3/4.......................................... 50
7211EBB-15.2...................................... 50
7211EBB-18.6...................................... 50
7211EBB-20.4...................................... 50
7211EBB-28.3...................................... 50
7211EBB-37......................................... 50
7211EBB-47......................................... 50
7211EBB-60......................................... 50
72120................................................ 464
72121................................................ 464
7214E................................................... 55
7215E................................................... 55
7216.................................................... 55
722.................................................... 193
7235BB................................................ 51
7237BB................................................ 51
7238SB................................................ 53
724...................................................... 80
72441................................................ 464
725–1-1/2............................................ 96
725–1-1/8............................................ 96
725–1-3/4............................................ 96
725–1-3/8............................................ 96
725–2.................................................. 96
725–2-1/2............................................ 96
725–2-1/8............................................ 96
725–3-5/8............................................ 96
725–4-1/2............................................ 96
725–4-1/8............................................ 96
725–7/8............................................... 96
72541................................................ 464
72638................................................ 464
72676................................................ 464
727.............................................. 28, 237
727M.................................... 28, 181, 188
72869V............................................... 464
72BB.................................................... 57
730-1/2................................................ 57
730-5/8................................................ 57
730-9/16.............................................. 57
730100A.............................................. 57
730101A.............................................. 57
7304.............................................. 58, 68
7306.............................................. 68, 69
7306SB.......................................... 67, 68
7307.................................................... 48
7309E................................................... 60
730BB-1............................................... 57
730BB-1-1/16...................................... 57
730BB-1-1/2........................................ 57
730BB-1-1/4........................................ 57
730BB-1-1/8........................................ 57
730BB-1-3/4........................................ 57
730BB-1-3/8........................................ 57
730BB-1-5/16...................................... 57
730BB-1-5/8........................................ 57
730BB-1-7/8........................................ 57
730BB-11/16........................................ 57
730BB-13/16........................................ 57
730BB-15/16........................................ 57
730BB-2............................................... 57
730BB-2-1/2........................................ 57
730BB-2-1/4........................................ 57
730BB-2-1/8........................................ 57
730BB-2-3/4........................................ 57
730BB-3............................................... 57
730BB-3/4............................................ 57
730EBB - 20.4...................................... 57
730EBB-120......................................... 57
730EBB-18.6........................................ 57
730EBB-37........................................... 57
730EBB-47........................................... 57
730EBB-60........................................... 57
730EBB-82........................................... 57
730MBB............................................... 57
730PBB-2-5/8...................................... 57
730PBB-3-3/4...................................... 57
730TBB................................................ 57
7310SB........................................... 67-68
735BB.................................................. 58
7360SB................................................ 70
7361SB................................................ 70
737BB.................................................. 58
738BB.................................................. 57
739BB.................................................. 57
73BB.................................................... 57
740H-1-7/32........................................ 47
741BB.................................................. 57
742BB.................................................. 57
744...................................................... 48
744BB.................................................. 57
745H-1................................................. 47
745H-1-1/2.......................................... 47
745H-1-1/4.......................................... 47
745H-1/2.............................................. 47
745H-2................................................. 47
745H-3/4.............................................. 47
745M-15.2........................................... 47
745M-16.2........................................... 47
745M-18.6........................................... 47
745M-20.4........................................... 47
745M-25.4........................................... 47
745M-32.5........................................... 47
745M-37.............................................. 47
745M-40.5........................................... 47
745M-47.............................................. 47
745M-50.8........................................... 47
745M-54.............................................. 47
745M-60.............................................. 47
745M-64.............................................. 47
745R-1/2.............................................. 47
746................................................. 66-69
74628................................................ 463
746C.................................................. 184
746SS.................................................. 48
747.................................................... 122
7475H........................................ 431, 433
749.................................................... 190
74BB.................................................... 57
750.................................... 181, 184, 433
7506.................................................... 48
750C.................................................. 353
750E975............................................. 184
750H767............................................ 184
751.................................................... 184
755...................................... 71, 430, 433
756............................................ 181, 185
757............................................ 190, 192
758.................................................... 190
75BB.................................................... 57
7606SB........................................... 65-66
761.................................................... 185
7610SB........................................... 65-66
7625.................................................. 381
7646Pg............................................ 68-69
7646PgSB....................................... 67-68
765.................................................... 195
766............................................ 148, 157
767..................... 48, 67-69, 71, 430, 433
76807................................................ 190
76BB.................................................... 57
77-3/4P................................................ 49
7704SB........................................... 63-64
7706SB........................................... 63-64
773.................................................... 185
774.................................................... 185
776............................................ 190, 192
777.................................................... 433
777E975............................................. 123
777HC755.......................................... 123
77CS.................................................. 281
77GX.................................................. 282
77GX2................................................ 282
77HP........................................... 353-354
77HP-G............................................... 281
77M-G................................................ 281
77P-1................................................... 49
77P-1-1/2............................................ 49
77P-1-1/2P.......................................... 49
77P-1-1/4............................................ 49
77P-1-1/4P.......................................... 49
77P-1/2................................................ 49
77P-1/2P.............................................. 49
77P-1P................................................. 49
77P-2................................................... 49
77P-2P................................................. 49
77P-3/4................................................ 49
77U-1................................................... 49
77U-1-1/2............................................ 49
77U-1-1/4............................................ 49
77U-1/2................................................ 49
77U-2................................................... 49
77U-3/4................................................ 49
7804E.............................................. 63-64
7804ESB......................................... 63-64
7804ISO.......................................... 63-64
7804SB........................................... 63-64
7806SB........................................... 63-64
7904E.............................................. 63-64
7904ESB......................................... 63-64
7904ISO.......................................... 63-64
7904SB........................................... 63-64
7906SB........................................... 63-64
796.................................................... 219
800............................................ 219, 433
800F1725........................................... 219
8012.................................................. 160
8018.................................................. 160
801K.................................................. 287
801K/50............................................. 287
802.................................................... 219
80205................................................ 459
8024.................................................. 160
802K.................................................. 288
803.................................................... 417
8060 DLX.................................... 416-417
811K.................................................. 287
811K/6A-BOX..................................... 287
825–68................................................ 95
825–74................................................ 95
826S.............................................. 94, 96
830................................................ 96, 98
830P.................................................... 98
830Pg................................................... 98
830Q.............................................. 94, 96
834...................................................... 98
835............................... 98, 150-151, 157
84003................................................ 107
84006................................................ 107
www.greenlee.com
CANADA
INTERNATIONAL
495
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
904H-18............................................... 84
904H-24............................................... 84
904H-5-1/2.......................................... 85
906.................................................... 419
909.................................................... 419
90ACK.......... 318-319, 321-323, 325-328
90SOC.............................................. , 330
910.................................................... 420
911.................................................... 422
914.................................................... 419
914B.................................................. 313
915B.................................................. 313
916.................................................... 423
91AV............................................... 57, 59
920XC-20C......................................... 315
920XC-20C-APC-FC............................ 315
920XC-20C-APC-SC........................... 315
920XC-20C-UPC-FC........................... 315
920XC-20C-UPC-SC........................... 315
920XC-20C-UPC-ST........................... 315
920XC-20M........................................ 314
920XC-20M-UPC-FC........................... 314
920XC-20M-UPC-SC.......................... 314
920XC-20M-UPC-ST........................... 314
920XC-30F......................................... 315
920XC-30F-APC-FC............................ 315
920XC-30F-APC-SC............................ 315
920XC-30F-UPC-FC............................ 315
920XC-30F-UPC-SC............................ 315
920XC-30P......................................... 315
920XC-30P-APC-SC........................... 315
920XC-30P-UPC-FC............................ 315
920XC-30P-UPC-SC........................... 315
920XC-30P-UPC-ST............................ 315
920XC-QR................................... 314-315
920XC-SM-MM............................ 314-315
921...................................................... 89
921-12................................................. 89
921-18................................................. 89
921-24................................................. 89
921-36................................................. 89
92335.................................................. 17
925-001............................................... 93
925-002............................................... 93
925-011............................................... 93
925-022............................................... 93
925-1-1/8............................................ 93
925-1-3/4............................................ 93
925-1-3/8............................................ 93
925-1-5/16.......................................... 93
925-1-7/32.......................................... 93
925-2-1/2............................................ 93
925-7/8................................................ 93
92AV............................................... 57, 59
93-172............................................... 399
93-172-C........................................... 399
93-20................................................. 398
93-30................................................. 403
930...................................................... 93
934-125............................................. 324
93667................................................ 452
93677................................................ 452
93682................................................ 452
93687................................................ 452
93692................................................ 452
945/1................................................. 280
945/ESD/1.......................................... 280
946K.................................................. 280
947.................................................... 280
947K.................................................. 280
948..................................... 280, 314-315
948/2................................................. 280
9501.................................................. 418
9502.................................................. 418
9505.................................................. 421
9510.................................................. 421
Tel: 800.435.0786
Fax: 800.524.2853
89225.................................................. 16
89228.................................................. 17
89229.................................................. 17
89230.................................................. 17
89231.................................................. 17
89232.................................................. 17
89233.................................................. 17
89234.................................................. 17
89235.................................................. 17
89236.................................................. 17
89237.................................................. 17
89238.................................................. 41
89239.................................................. 42
89246.................................................. 42
89249.................................................. 20
89250.................................................... 4
89251.................................................... 6
89252.................................................... 6
89253.................................................... 6
89254.................................................... 5
89255.................................................... 5
89256.................................................... 5
89257.................................................... 5
89258.................................................... 5
89259.................................................... 7
89260.................................................... 7
89262.................................................... 4
89263.................................................... 4
89264.................................................... 4
89265.................................................... 4
89266.................................................. 34
89267.................................................. 22
89268.................................................. 23
89269.................................................. 23
89270.................................................. 23
89271.................................................. 23
89272.................................................. 23
89273.................................................. 23
89274.................................................. 24
89275.................................................. 21
89276.................................................. 21
89277.................................................. 24
89278.................................................. 24
89279.................................................. 24
89280.................................................. 24
89281.................................................. 24
89282.................................................. 24
89283.................................................. 24
89284.................................................. 24
89285.................................................. 24
89286.................................................. 24
89287.................................................. 24
89288.................................................. 24
89289.................................................. 24
89290.................................................. 24
89291.................................................. 21
89292.................................................. 21
89293.................................................. 21
89799................................................ 392
89800................................................ 163
89803................................................ 136
89806.......................................... 30, 130
89872................................................ 315
89877................................................ 315
89882................................................ 315
89887................................................ 315
89892................................................ 315
90007................................................ 458
900B.................................................. 328
901-12................................................. 84
901B.................................................. 328
902-18................................................. 84
902-24................................................. 84
904-5-1/2............................................ 84
904–5-1/2............................................ 85
904H-12............................................... 84
Tel: 800.435.0786
Fax: 800.451.2632
84H1.................................................. 113
84H2.................................................. 113
84H3.................................................. 113
851.................................................... 129
854.................................................... 160
855.................................................... 160
857.................................................... 129
859-4................................................. 130
860-1-1/2.......................................... 128
860-3................................................. 128
860-4................................................. 128
8600.................................................... 31
861.................................................... 130
862.............................................. 30, 130
864............................... 30, 130, 150-151
865...................................... 30, 130, 150
866.................................................... 105
86786................................................ 391
86787................................................ 391
86788........................................ 336, 391
86795................................................ 136
86796................................................ 136
868............................................ 105, 159
86999................................................ 394
870............................................ 105, 150
87073................................................ 395
87121................................................ 394
87136................................................ 360
87AV.................... 57, 59-60, 88, 304, 446
880.................................................... 433
880E975............................................. 122
880H755............................................ 122
881BASIC........................................... 120
881CTDE980...................................... 120
881CTE980........................................ 120
882.................................................... 433
882-E975........................................... 118
882-H755........................................... 118
882CB-E975....................................... 118
882CB-H755...................................... 118
882RI-G1............................................ 118
884.................................................... 433
884E980............................................. 124
884PVC....................................... 124-125
885.................................................... 433
885E980............................................. 124
88802................................................ 457
88803................................................ 457
88806................................................ 457
88807................................................ 457
88808................................................ 457
88810................................................ 457
88814................................................ 457
889...................................................... 98
890...................................................... 98
891...................................................... 98
89101................................................ 444
89102................................................ 444
89204.................................................. 39
89205.................................................. 36
89209.................................................. 14
89210.................................................. 14
89211.................................................. 14
89212.................................................. 14
89213.................................................. 14
89214.................................................. 18
89215.................................................. 18
89216.................................................. 18
89217.................................................. 18
89218.................................................. 15
89219.................................................. 15
89220.................................................. 14
89221.................................................. 14
89222.................................................. 19
89223.................................................. 19
89224.................................................. 19
Index
84009................................................ 107
84012................................................ 107
84015................................................ 107
84019................................................ 107
840A........................................... 112-113
840AH................................................ 113
840F............................................ 112-113
840FH................................................ 113
84110................................................ 106
84111................................................ 106
84112................................................ 106
841A........................................... 112-113
841AH................................................ 113
841F............................................ 112-113
841FH................................................ 113
84253................................................ 106
84256................................................ 106
84273................................................ 106
84276................................................ 106
84299........................................ 105, 106
842A........................................... 112-113
842AH................................................ 113
842F............................................ 112-113
842FH................................................ 113
843.................................................... 160
84305........................................ 105, 106
84329................................................ 106
84335................................................ 106
843A........................................... 112-113
843F............................................ 112-113
84405................................................ 108
84409................................................ 108
84424................................................ 108
84425................................................ 108
84428................................................ 108
84429................................................ 108
84463................................................ 107
84466................................................ 107
84469................................................ 107
84472................................................ 107
84475................................................ 107
84478................................................ 107
84481................................................ 107
84484................................................ 107
84485................................................ 310
84486................................................ 311
84487................................................ 311
84488................................................. 311
84489................................................ 311
84490................................................ 311
84491................................................ 311
84492................................................ 312
84493................................................ 312
84494................................................ 312
84495................................................ 313
84496................................................ 313
84497................................................ 313
84498................................................ 313
84499................................................ 313
845.................................................... 160
84500................................................ 313
84501................................................ 312
84526................................................ 109
84532................................................ 109
84538................................................ 109
84544................................................ 109
84550................................................ 109
84576................................................ 109
84582................................................ 109
84588................................................ 109
84594................................................ 109
846.................................................... 160
84600................................................ 109
847.................................................... 129
848.................................................... 129
849.................................................... 129
INTERNATIONAL
CANADA
Tel: 800.435.0786
Fax: 800.524.2853
Tel: 800.435.0786
Fax: 800.451.2632
USA
Tel: +1.815.397.7070
Fax: +1.815.397.9247
Index
MADE FOR THE TRADE!™
496
9516.................................................. 420
9517.................................................. 420
9520.................................................. 418
9522.................................................. 425
9525F................................................. 424
9529F................................................. 424
956LN................................................ 331
956US................................................ 331
956WW.............................................. 331
95925.................................................... 4
95927.................................................... 7
95928.................................................. 28
95929.................................................. 12
95930.................................................. 11
95932.................................................. 39
95933.................................................. 15
960 SAPS.................................... 432-433
970914C............................................ 441
975............................................ 431, 433
9753-11C............................................. 20
9753-12C............................................. 20
9753-13C............................................. 20
976.................................................... 433
980............................................. 432-433
980-22............................................... 432
980-22PS........................................... 432
9858-11............................................... 38
9858-12............................................... 38
9952-11............................................... 28
9953-11............................................... 20
9953-13............................................... 15
9953-15............................................... 15
Greenlee Textron Inc. warrants to the original
purchaser of these goods for use, that these
products will be free from defects in workmanship
and material for their useful life, excepting normal
wear and abuse. This warranty is subject to the same
terms and conditions contained in Greenlee Textron
Inc.’s standard one-year limited warranty.
*See below for information regarding product returns.
Limited Warranty
Greenlee Textron Inc. extends the following warranty to the original purchaser of these goods for use, subject to the qualifications indicated. Greenlee Textron Inc.
warrants to the original purchaser for use that the products sold by it will be free from defects in workmanship and material for a period of one year (three years for
Gator® battery-powered and corded tools, not including batteries) from the date of purchase, provided such goods are installed, operated, maintained, and used in
accordance with Greenlee Textron Inc.’s written instructions.
Ordinary wear and tear, and damage from abuse, neglect or alterations are not covered by this warranty. This warranty is null and void if instructions and operating
procedures are not followed.
Greenlee Textron Inc.’s sole liability and Purchaser’s sole remedy for a failure of goods under this limited warranty, and for any and all claims arising out of the
purchase and use of the goods, shall be limited to the repair or replacement of the goods that do not conform to this warranty, and shall be in lieu of any other
liability or remedy, including, without limitation, any causes of action in negligence and strict liability.
To obtain repair or replacement service under this limited warranty, the purchaser must return the product to a Greenlee Authorized Service Center, transportation
prepaid. Do not send any warranty/repair product directly to Greenlee, as it will be returned to the sender. Only Test Instruments will be warranted, repaired, replaced, or
calibrated at Greenlee with prior authorization.
Tools found defective will be replaced or repaired at no charge and returned. There are no express warranties covering these goods other than as set forth above. The
implied warranties of merchantability and fitness for a particular purpose are specifically excluded. Greenlee Textron Inc. assumes no liability in connection with the
installation or use of this product, except as stated in this limited warranty. Greenlee Textron Inc. will in no event be liable for incidental or consequential damages.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow either limitations on
implied warranties, or exclusions from incidental or consequential damages, so the above limitation and exclusion may not apply to you.
Any questions pertaining to this limited warranty should be addressed to:
Greenlee / A Textron Company
4411 Boeing Drive, Rockford, IL 61109-2988 USA
Greenlee Textron Inc. has elected not to make available the informal dispute settlement mechanism which is specified in the Magnuson-Moss Warranty Act.
Note: Rental units and demonstrators used for income producing purposes are warranted for 90 days. Rental units and demonstrators which are resold are not covered
under warranty by Greenlee Textron Inc. Any warranty, whether expressed or implied, rests solely with the seller.
Lifetime Limited Warranty on Greenlee Electrical Test Instruments, Hand Benders, select Hand Tools and Paladin® branded items.
Greenlee Textron Inc. warrants to the original purchaser of these goods for use that these products will be free from defects in workmanship and material for their
useful life, excepting normal wear and abuse. This warranty is subject to the same terms and conditions contained in Greenlee Textron Inc.’s standard one year limited
warranty.
Greenlee Electrical Test Instrument Repair and Calibration
For all Greenlee Electrical Test Instrument repairs, contact Customer Service at 1-800-435-0786 and request a Return Authorization. An approved Authorization including
shipping label and instructions will be sent.
For items not covered under warranty (such as items dropped, abused, etc.), a repair cost quote is available upon request.
Note: Prior to returning any test instrument, please check replaceable batteries or make sure the battery is at full charge.
Many end user customers require assurance of product performance. Proof of accuracy and precision of an instrument is often required. This requirement may be a
result of ISO procedures or customer quality audit requirements. Greenlee Textron Inc. can provide calibration service for specifically marked hand-held electrical test
equipment. Calibration assures the customer that the instrument has been checked and/or calibrated using equipment that is checked and calibrated to standards that
are traceable to the National Institute for Standards and Technology (NIST). Products currently included are all clamp meters, professional series Digital Multimeters and
megohmmeters. A certificate will be provided.
To obtain this calibration service, call Customer Service at 1-800-435-0786 and request a Return Authorization.
NEED MORE INFORMATION?
USA & CANADA: 1.800.435.0786
INTERNATIONAL: +1.815.397.7070
www.greenlee.com
4455 BOEING DRIVE, ROCKFORD, IL 61109-2988 USA
GENERAL OFFICES: (815) 397.7070
CUSTOMER SERVICE AND FIELD SERVICE
TELEPHONE
USA & CANADA
800.435.0786
INTERNATIONAL
+1.815.397.7070
FAX (24 HOUR)
USA
CANADA
INTERNATIONAL
800.451.2632 OR 815.397.1865
800.524.2853
+1.815.397.9247
©2010 Greenlee Textron
An ISO 9001 Company
MA-1024 rev6/10
Printed in USA
Greenlee Textron Inc. is a
subsidiary of Textron Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2010:07:07 09:35:06-05:00 Creator : Adobe InDesign CS4 (6.0.5) Modify Date : 2012:07:27 14:27:29-04:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Instance ID : uuid:ff57ce14-2046-4f50-9f31-2ba1f97955f0 Document ID : adobe:docid:indd:85741a49-7147-11df-ac59-c59196abd496 Rendition Class : proof:pdf Derived From Instance ID : 48117d03-70b2-11df-ba04-a44ee4355f2f Derived From Document ID : adobe:docid:indd:79c4d1c7-4deb-11df-92d8-f82d39575f2a Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Y Resolution : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : xmp.iid:6AA693547E226811871FC6294CEDB9ED, xmp.iid:621F0DCB7D226811871FC6294CEDB9ED, xmp.iid:F4046C138F226811871FC6294CEDB9ED, xmp.iid:0780117407206811871FC6294CEDB9ED, xmp.iid:5E1F0DCB7D226811871FC6294CEDB9ED, xmp.iid:0580117407206811871FC6294CEDB9ED, xmp.iid:0980117407206811871FC6294CEDB9ED, uuid:6F8FCED13B3FDF11B5BCF20B3FCB5165, uuid:71a1eded-2c2b-11d9-aeaf-d48fba45618e, uuid:12361AA2F434DF11A24E804DF2F54FE2, uuid:2696316134D311DF8A57B54E55106187, uuid:97825299503411DDB29E9A7277C2C0B4, uuid:920B43532121DF11ABEFD9DD7C35348A, uuid:4E914CFEA41EDF11A3C0E60823AA7AAA, uuid:D36F929E2ED111DF89D1DE0C2C080077, uuid:05944E6A7E5E11DC88CAE508F3F13CF9, uuid:FB11712BD52EDF11B12DEEDB5B99EA15, uuid:EF13D52F8D39DF1187589A5448FFB613, uuid:1389069B654BDC118CDE84EE478B64A8, uuid:499BD37DF534DF11B86FE5FBAB1A1371, uuid:ED5C0DD4F134DF1186E5A8553CEB3F18, uuid:174FA6ABF234DF11BB3CB0915CE25074, uuid:CC0CF504F434DF11BB3CB0915CE25074, uuid:F0AD4F0C2542DF11B692EAD1A9E2319F, uuid:138FF8B37AB5DE11AD5FB15464FF86A3, uuid:4CC2EAC3CE2EDF11A41AF23F33FE3DEC, uuid:B5F6A431D52EDF118DEE8CE17ED11DBC, uuid:97C33E884B6ADF118CE19077B7EEA78E, uuid:D36F929E2ED111DF89D1DE0C2C080077, uuid:819C58616E54DF11A711F0B003C53EE8, uuid:80032F1043B911DF97A7854A7B4D8C8C, uuid:326C1B1CDA38DF11BD65FBFB5C113376, uuid:C49DFE184D42DF11846D976518249271, uuid:5154EF327C53DF11B9198DFFFE8DFFF7, uuid:B1A268B6CB3CDF11B178E0E964890A61, uuid:0ED826BEB359DF119FD6A04D8ED68736, uuid:97825299503411DDB29E9A7277C2C0B4, uuid:AB0B6976503411DDB29E9A7277C2C0B4, uuid:21A705D9F65B11DCA77BF538FFCC5580, uuid:0BC72E0F75CFDE11930DCBC2290A4EEC, uuid:D721967EAB0311DC93BFD1CF54B1EDE7, uuid:DADE1459C661DF11BEE5F60661475DE5, uuid:A77F81EA8139DF11B07DF17A5A1A59B0, uuid:4E914CFEA41EDF11A3C0E60823AA7AAA, uuid:6A348B23FD6ADF11AB14D825876ED930, uuid:88ABCB44653111DBBC37E53C9ECDE46C, xmp.iid:6AA693547E226811871FC6294CEDB9ED, xmp.iid:68A693547E226811871FC6294CEDB9ED, xmp.iid:66A693547E226811871FC6294CEDB9ED, xmp.iid:0380117407206811871FC6294CEDB9ED, xmp.iid:671F0DCB7D226811871FC6294CEDB9ED, xmp.iid:651F0DCB7D226811871FC6294CEDB9ED, xmp.iid:62A693547E226811871FC6294CEDB9ED Manifest Reference Document ID : xmp.did:69A693547E226811871FC6294CEDB9ED, uuid:0A07F601DC31DF118F63A7FF4AF99078, uuid:02B9BF6951EDDE11889EBD2DD50AA204, uuid:46485293B83CDF11B178E0E964890A61, uuid:6694A319B33CDF11B178E0E964890A61, uuid:FCFA567CB93CDF11B178E0E964890A61, uuid:57A4FC4AB83CDF11B178E0E964890A61, uuid:6E8FCED13B3FDF11B5BCF20B3FCB5165, adobe:docid:photoshop:71a1edec-2c2b-11d9-aeaf-d48fba45618e, uuid:11361AA2F434DF11A24E804DF2F54FE2, uuid:2696316034D311DF8A57B54E55106187, uuid:97825298503411DDB29E9A7277C2C0B4, uuid:910B43532121DF11ABEFD9DD7C35348A, uuid:4D914CFEA41EDF11A3C0E60823AA7AAA, uuid:D36F929D2ED111DF89D1DE0C2C080077, uuid:0F5ACF8D36E111DCB9EEA25DF6D2A31C, uuid:FA11712BD52EDF11B12DEEDB5B99EA15, uuid:EE13D52F8D39DF1187589A5448FFB613, adobe:docid:photoshop:64de8ae1-84ac-11db-9658-cb09f7e9d9b0, uuid:489BD37DF534DF11B86FE5FBAB1A1371, uuid:EC5C0DD4F134DF1186E5A8553CEB3F18, uuid:164FA6ABF234DF11BB3CB0915CE25074, uuid:CB0CF504F434DF11BB3CB0915CE25074, uuid:EFAD4F0C2542DF11B692EAD1A9E2319F, uuid:128FF8B37AB5DE11AD5FB15464FF86A3, uuid:4BC2EAC3CE2EDF11A41AF23F33FE3DEC, uuid:B4F6A431D52EDF118DEE8CE17ED11DBC, uuid:56F6AFEFC5FADE11AFB394DCA6FED2FB, uuid:D36F929D2ED111DF89D1DE0C2C080077, uuid:1F0418426E54DF11A711F0B003C53EE8, uuid:80032F0F43B911DF97A7854A7B4D8C8C, uuid:316C1B1CDA38DF11BD65FBFB5C113376, uuid:C39DFE184D42DF11846D976518249271, uuid:5054EF327C53DF11B9198DFFFE8DFFF7, uuid:B0A268B6CB3CDF11B178E0E964890A61, uuid:241ED0AEB359DF119FD6A04D8ED68736, uuid:97825298503411DDB29E9A7277C2C0B4, uuid:AB0B6975503411DDB29E9A7277C2C0B4, uuid:21A705D8F65B11DCA77BF538FFCC5580, uuid:AEE38DAC65CFDE11930DCBC2290A4EEC, uuid:5CC11310AAE911DC93BFD1CF54B1EDE7, uuid:D7DE1459C661DF11BEE5F60661475DE5, uuid:A67F81EA8139DF11B07DF17A5A1A59B0, uuid:4D914CFEA41EDF11A3C0E60823AA7AAA, uuid:69348B23FD6ADF11AB14D825876ED930, uuid:88ABCB40653111DBBC37E53C9ECDE46C, xmp.did:69A693547E226811871FC6294CEDB9ED, uuid:285771128165DF11B6DF870CDB13B624, uuid:6E8FCED13B3FDF11B5BCF20B3FCB5165, uuid:4AAB0E93BA3CDF11B178E0E964890A61, uuid:C4B851B0755811DBA0A391E57154AF3B, uuid:0A789FA60407DD118197E935863D8306, uuid:AAE041D7755711DBA0A391E57154AF3B Metadata Date : 2012:07:27 14:27:29-04:00 Creator Tool : Adobe InDesign CS4 (6.0.5) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 11486 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 500 Signing Date : 2012:07:27 14:27:24-04:00 Signing Authority : ARE Acrobat Product v8.0 P23 0002337 Document Usage Rights : FullSave Form Usage Rights : Add, FillIn, Delete, SubmitStandaloneEXIF Metadata provided by EXIF.tools