4L P D
2017-10-13
: Pdf 4L-P-D 4L-P-D spec products litecontrol
Open the PDF directly: View PDF .
Page Count: 6
Download | |
Open PDF In Browser | View PDF |
4L-P-D MOD™ 4 LED Pendant Direct Fixture Type: Project Name: Ordering Guide Feature Code Options Description Series 4L MOD Mounting P Pendant Fixture distribution D AD Direct Asymmetric Direct Row length (in feet) ___’ Enter in foot increments. Note fixture lengths below. Max length in row 02 03 04 05 06 08 2', 609mm 3’, 914mm 4’, 1219mm 5', 1524mm* 6’, 1829mm 8’, 2438mm *Not available for row mounting Downlight diffuser SOF REG BWO ASYM Soft Diffuse Regressed Diffuse Lens* Blade Baffle with Overlay* Asymmetric Diffuse Lens*/** *Not Available with Patterns **Must be ordered with AD Finish/Color Matte White (Default) Textured Matte White Light Silver Machined Aluminum Carbon Black Textured Camera Black Custom Color C1 C2 C3 C4 C5 C6 CC Color temperature 30K 35K 40K 2230TD 2750T 2765T 3000K 3500K 4000K 2200K-3000K SpectraSync™ Dim-to-Warm* 2700K-5000K SpectraSync™ Tunable White* 2700K-6500K SpectraSync™ Tunable White* *Must be ordered with D05 Driver option; excludes 2' and 3' lengths Direct output/ft (specifiable in 50 lumens/ft increments) 300 1100 D030 D110 Driver NDM D10 D01 D05 LEC LHI LTW DALI Non Dimming 10% Dimming, 0-10V 1% Dimming, 1-10V* 5% Dimming, 0-10V Lutron Ecosystem Dimming Lutron Hi-Lume 3-Wire Dimming Lutron Hi-Lume 2-Wire Dimming DALI *Contact Factory Circuiting 1 Circuit 1C Voltage UNV 120 277 347 Universal Voltage 120 Volt 277 Volt 347 Volt* *Excludes Emergency Battery Pack 'EF' Option. Excludes DALI and Lutron (LTW/LHI/LEC) Dimming Drivers 4.5” (114mm) 4.25" (108mm) 4.43” (113mm) Key Features • Variable Intensity technology provides specifiable lumen output/wattage. • End cap design eliminated visible diffuser seams/gaps • 2 SDCM color variation Performance Nomenclature Lumens/ft W/ft D030 300 2.9 D035 350 3.4 D040 400 3.8 D045 450 4.3 D050 500 4.8 D055 550 5.3 D060 600 5.8 D065 650 6.4 D070 700 6.9 D075 750 7.4 D080 800 7.9 D085 850 8.5 D090 900 9.0 D095 950 9.6 D100 1000 10.2 D105 1050 10.7 D110 1100 11.3 (wattage may vary up to 5% from published) Quick Find litecontrol.com Page 1/6 Rev. 10/10/17 © 2017 Litecontrol, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 65 Spring Street Plympton, MA 02367 / Tel 781.294.0100 / Website www.litecontrol.com Efficacy 104 104 104 104 104 103 103 102 102 101 101 100 100 99 99 98 97 4L-P-D LED / 4L-P-D 4L-P-D MOD™ 4 LED Pendant Direct Ordering Guide (continued) Suspension kit FA1 FA2 FA3 FA4 Suspension Kit, 51” Suspension Kit, 87” Suspension Kit, 219” Suspension Kit, 363” * Add suffix /V to replace all 2" non-feed canopy covers with 5" canopy covers. FA1/V = 51" suspension kit w/ 5" canopies; Stems (where applicable), canopies, and feed cord are supplied in white regardless of fixture color unless otherwise specified Optional Features Description Code Options Nightlight _NL Nightlight Circuit Required. Enter quantity. 2NL = 2 nightlight circuits/row Emergency ICP7 Emergency Battery. Integral-Iota CP-07. Enter quantity. Example: 2ICP7 = 2 Emergency batteries/row. *Not available for 2' or 3' Thru-wiring W1 W2 W3 No Thru Wire Provide Normal and Emergency Thru Wiring* Provide Normal Thru Wiring Only *Only applicable when specified with emergency Patterns PTRN Contact Factory for pattern configurations. Approval drawings required. See page 4. Sensors SD1 SO1 Daylight Sensor Required. Enter quantity. 2SD1=2 daylight sensors/row Occupancy Sensor Required. Enter quantity. 2SO1=2 occupany sensors/row T-Bar Clips CB1 CB2 CB3 T-bar clip - 15/16" T-bar clip - 9/16" T-bar clip - 9/16" SS *To be ordered with Luminaire Canopy Box, see page 3 for details Output Exceptions: Value Direct OutputTotal lm/ft D030 300 2' fixture lengths: Excludes LEC, LHI, LTW, D01, DALI Dimming Drivers, and 347V 3' fixture lengths: Excludes DALI Dimming Drivers, D01, and 347V 4' fixture lengths: Excludes D01 D035 350 2' fixture lengths: Excludes LEC, LHI, LTW, D01, DALI Dimming Drivers, and 347V 3' fixture lengths: Excludes D01, DALI Dimming Drivers, and 347V D040 400 2' fixture lengths: Excludes LEC, LHI, LTW, D01, DALI Dimming Drivers, and 347V 3' fixture lengths: Excludes D01 D045 450 2' fixture lengths: Excludes DALI Dimming Drivers, D01, and 347V 3' fixture lengths: Excludes D01 D050 500 2' fixture lengths: Excludes D01, DALI Dimming Drivers, and 347V D055 550 2' fixture lengths: Excludes D01, DALI Dimming Drivers, and 347V D060 600 2' fixture lengths: Excludes D01 D065 650 2' fixture lengths: Excludes D01 Direct Drivers Quick Find litecontrol.com Page 2/6 Rev. 10/10/17 © 2017 Litecontrol, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 65 Spring Street Plympton, MA 02367 / Tel 781.294.0100 / Website www.litecontrol.com 4L-P-D LED / 4L-P-D 4L-P-D MOD™ 4 LED Pendant Direct Details Construction: Housing-extruded aluminum with extruded aluminum end headers. End caps- Die cast aluminum with magnetic interface. Overlaps diffuser at each fixture end to eliminate gaps/ LED visibility. Field accessibility: LED boards and drivers can be accessed an removed from above fixture, while installed. LED boards can be replaced either individually or as part of 2’ module. Downlight diffuser: SOF- Soft diffuse acrylic lens. REG- Regressed softglo lens with painted steel inserts. Output multiplier (.77") BWO-White blade baffle with softglo lens overlay. Output multiplier (.70") 3', 4', 6', & 8' lengths available. ASYM- Highly transmissive diffuse acrylic lens with linear patterns Circuiting: 1C (1 Circuit) Fixture wired for a single circuit. Finish/Color: Visit www.litecontrol.com/finishes for details. CCT: 30K-3000K output multiplier (.975) 35K-3500K output multiplier (1.0) 40K-4000K output multiplier (1.05) Y Canopy covers: Non-feed-2” diameter (unless 5” non-feed cover is specified). Feed-5” diameter. Feed cord: 4-wire, 7 amps max; 5-wire, 5 amps max. Nightlight: See separate LC-Nightlight spec sheet for additional details. 0.43 Emergency: Inverter-Compatible. Provided by others. Integral-IOTA CP7 See separate LC-Emergency spec sheet for additional details. .40 ANSI 3000K Thru wiring: See separate LC-Thruwire spec sheet for additional details. ANSI 3500K ANSI 4000K .35 .35 .40 .45 .50 X Color Variation: 2 step MacAdam ellipse Output (VI technology): Variable Intensity (VI) technology allows precise specification of fixture output/wattage. Fixture will be programmed and labeled to specification. Specify each in 50 lumen increments/ft with the below range: Min: Max: Suspension Kit: 3/64” diameter field-adjustable aircraft cable. Ship separately. Suspension required at every row joint. Low profile cable gripper limits visibility while providing maximum horizontal balance adjustment. Lumens/ft 300 1100 Nomenclature D030 D110 Sensors: Daylight sensor(Wattstopper part #FD301). Installs between diffusers. Occupancy sensor(Wattstopper FS-305 with FS-L6 lens). Installs between diffusers. See separate LC-Controls spec sheet for additioanl details. Luminaire Canopy Box: See separate LC instructions for additional details *For use with Grid Ceilings only T-Bar Clips: See separate LC instructions for additional details *For use with Grid Ceilings only SpectraSync™ Color Tuning Technology: Control your space based on the needs of the application, specific activities throughout the day and preferences of the occupants with two distinct SpectraSync™ Color Tuning Technology. Dim to Warm: Dim to Warm mimics the familiar warming effect that occurs with traditional incandescent sources as they are dimmed. (Available with 2200K-3000K). Tunable White: Tunable White offers users the ability to tailor CCT to their personal preference, enhancing task visibility, material and colors or the aesthetics of the space. (Available with 2700K-5000K or 2700K-6500K). See separate SpectraSync™ Tech Sheet for additional details. See separate NX™ Solutions Guide for additional details. Color Tuning Technology Driver: NDM: Non-dimming. Fixture will be wired for fixed light output. D10: 100%-10% dimming range. Fixture will be wired for low voltage 0-10V dimming control. D01: 100%-1% dimming range. Fixture will be wired for low voltage 0-10V dimming control. Contact factory. D05: Osram 5% Dimming, 0-10V. Only option if either 2230TD, 2750T or 2765T is selected. LEC: Lutron Ecosystem compatible using Lutron A-Series driver. 100%-1% dimming range. LHI: Lutron Hi-Lume 3 wire dimming compatible using Lutron A-Series driver. 100%-1% dimming range. LTW: Lutron Hi-Lume 2-Wire dimming using Lutron A-Series driver. DALI: DALI compatible. *See driver limitations in Output section above. Quick Find litecontrol.com Page 3/6 Rev. 10/10/17 © 2017 Litecontrol, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 65 Spring Street Plympton, MA 02367 / Tel 781.294.0100 / Website www.litecontrol.com 4L-P-D LED / 4L-P-D 4L-P-D MOD™ 4 LED Pendant Direct Details (continued) System Connectors: 90° corners available. One piece construction, ready to install, with diffusers that match adjoining fixtures. Corner system connectors must be used to form patterns. The length of each outside or inside lighted 90° corners is 12". 8 Rated Life (Driver): Standard = 100,000 hours Lutron = 50,000 hours Fixture weight: 3 lbs/ft. Rated Life (LED Board): Tested in accordance to LM79-2008 & derived from EPA TM-21 calculator L70: 280,000 (calculated per TM-21 extrapolated curve) L70: >61,000 (reported per TM-21/LM80 6x’s limitation) L90: 72,000 (calculated per TM-21 extrapolated curve) 5 6 4 7 L90: >61,000 (reported per TM-21/LM80 6x's limitation) Ratings: CSA listed for damp locations. IBEW. AF of L. 2 3 Warranty: 5 years. See www.litecontrol.com for details. Planning for installation : Suspension Mounting Locations Pendant locations at ends of rows (or individual fixtures) are 3/8" from fixture ends. Pendant attachment allows for horizontal adjustment to "finetune" side-to-side leveling. 1 D Individual Mounting: 1/2" PG. P-D & S-D-0200 ODUCT IN ANY WAY, OR INSTALL IN ANY FASHION FIXTURE ASSEMBLY UCTIONS CONTAINED HEREIN. _______ ARDING THIS PRODUCT OR THE INSTALLATION OF IT, 4 7/16" PG. 1 OF 2 EERING AT 781-294-0100. INSTALL IN ANY FASHION HEREIN. OR THE INSTALLATION OF IT, 0. 1/2" KO 1/4" FIXTURE LENGTH +1/2” P-D & S-D-0200 FIXTURE ASSEMBLY 3 1/4" FIXTURE TYPE_______ 1 OF 2 C 5/8" KO Row Mounting: 1/4" FAI/ACC FAI/ACC/F SIDE VIEW - INDIVIDUAL MOUNTED PENDANT MOUNTED FIXTURE 1/2" 1/2" FAI/ACC FAI/ACC/F SIDE VIEW - INDIVIDUAL MOUNTED PENDANT MOUNTED FIXTURE 1/2" B 1/2" END CAP 24",36",48",60",72",96" END CAP 24",36",48",60",72",96" PART NUMBER: 4L-P-D-04 4' DESCRIPTION 1/2" FIXTURE LENGTH MINUS 1/2" FIXTURE LENGTH FIXTURE LENGTH FIXTURE LENGTH MINUS 1/2" FAI/ACC FAI/ACC/F 1/2" FIXTURE LENGTH MINUS 1/2" FIXTURE LENGTH FIXTURE LENGTH FIXTURE LENGTH MINUS 1/2" A 65 SPRING STREET PLYMPTON, MA 02367 7 8 6 INT FIXTURE FIXTURE AT4END OF ROW INT FIXTURE 5 SIZE UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES FAI/ACC FIXTURE AT END OF ROW ANGULAR: DECIMAL: ± 1 ° .XX 3 MATERIAL APPROVED CONFIDENTIAL - THIS PRINT IS THE PROPERTY OF LITECONTROL CORP AND IS LOANED ON CONDITION THAT IT WILL NOT BE USED IN ANY WAY DETRIMENTAL TO OUR INTERESTS AND IS SUBJECT TO RETURN UPON DEMAND. THIRD ANGLE PROJECTION FAI/ACC/F DRAWN ± .01 .XXX B ± .005 FINISH DWG. NO. INITIAL ECN: REV 4L-P SHEET 1 OF 1 SCALE: 1:4 2 1 END CAP Patterns: SIDE VIEW - ROW MOUNTED PENDANT MOUNTED FIXTURES FIXTURE AT END OF ROW INT FIXTURE FIXTURE AT END OF ROW INT FIXTURE END CAP SIDE VIEW - ROW MOUNTED PENDANT MOUNTED FIXTURES suspension cable location on female end surface mount location on the linear fixture 2 5/16" 12 12 11 21/32" FORM B520140-4 12 12 12 11/32" 3 3/16" (3L) 4 7/16" (4L) 6 7/16" (6L) female end of row 3 3/16" (3L) 4 7/16" (4L) 6 7/16" (6L) FORM B520140-4 male end of row suspension cable location on male end SCREW DIRECTION LABEL Page 4/6 Rev. 10/10/17 © 2017 Litecontrol, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 65 Spring Street Plympton, MA 02367 / Tel 781.294.0100 / Website www.litecontrol.com Quick Find litecontrol.com 4L-P-D LED / 4L-P-D 4L-P-D SPECTRAL POWER DISTRIBUTION COMPARISON 30K 35K 40K 100% MOD™ 4 LED Pendant Direct Details (continued) 40% 20% Color Characteristics: Value 60% Ordering Code Spectral Distribution: SPECTRAL POWER DISTRIBUTION COMPARISON 0% 380 430 30K 35K 40K Rf 83 82 82 Rg 96 96 96 CCT (K) 3009 3494 3975 Duv -0.0009 -0.0004 -0.0003 x 0.435 0.4052 0.3814 y 0.4012 0.3898 0.3768 CIE Ra 83 83 84 Color Vector Graphic: 30K: 480 530 580 630 680 100% Wavelength (nm) 730 30K 35K 40K 780 80% Relative Power Relative Power 80% 60% 40% 20% 0% 380 430 480 530 580 630 Wavelength (nm) 680 730 780 Color Gamut/Fidelity Plot Rf-Rg Plot 140 Approx. limits for sources on 2 1 1 the Planckian locus. 2 Approx. limits for practical light sources. 130 120 Gamut Index, R g 110 35K: 100 90 80 Rf-Rg Pl 140 70 30K 35K 40K 1 2 60 50 60 70 80 90 100 130 Fidelity Index, Rf 40K: CRI: 80 minimum 120 CCT CRI R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 110 Gamut Index, R g 30K 83 82 91 97 81 82 89 84 62 13 79 79 69 84 99 35K 83 81 89 95 81 81 85 86 65 13 73 79 62 83 97 100 40K 84 82 90 94 82 82 85 87 68 17 74 80 60 84 97 90 Quick Find litecontrol.com Page 5/6 Rev. 10/10/17 © 2017 Litecontrol, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 65 Spring Street Plympton, MA 02367 / Tel 781.294.0100 / Website www.litecontrol.com 80 70 4L-P-D LED / 4L-P-D REPORT NUMBER: 16.00100_D PAGE: 3 OF 7 ISSUE DATE: 03/07/16 PREPARED FOR: Litecontrol CATALOG NUMBER: 4L-P-ID-STD-4-04-SOF-IND-C1-35K-D133 LUMINAIRE: 4"x4’ white extruded aluminum housing. Direct Reflector with 2 rows of LED boards LAMP CAT. NO.: 757DRT-V1 LAMP: 192- Nichia 3500K LEDs BALLAST CAT. NO.: OT50W/PRG1400D/UNV/DIM/L BALLAST: 1- OSRAM - Programmed to 1400mA REFLECTOR: Std. PPO MOUNTING: Pendant REFRACTOR: White Acrylic NOTE: DATA SHOWN IS ABSOLUTE FOR THE SAMPLE PROVIDED. CANDELA DISTRIBUTION 0.0 22.5 45.0 0 2091 2091 2091 5 2119 2072 2063 15 2017 1971 1960 25 1832 1783 1767 35 1577 1534 1515 45 1281 1247 1223 55 972 942 924 65 644 633 621 Fixture: 4L-P-D-XX-XX-SOF-CX-35K-D100 75 330 325 321 85 70 70 75 CCT: 3500K 90 0 0 0 Photometry 67.5 2091 2077 1968 1761 1496 1201 897 601 311 73 0 90.0 2091 2078 1963 1756 1489 1194 891 593 310 75 0 MOD™ 4 LED Pendant Direct FLUX 197 556 818 950 947 826 701 Millennium Blvd Greenville, 610 SC 29607 339 www.hubbelllighting.com 88 90˚ Output: D100 ZONAL LUMEN SUMMARY ZONE LUMENS %FIXT Nominal lumens: 1000 lumens/ft 0- 30NUMBER: 17.00695 1570 29.5 REPORT PAGE: 0- 40 2520 47.3 750 Efficacy: 98 lm/W ISSUE DATE: 03/10/17 0- 60 FOR: LITECONTROL 4293 80.5 PREPARED 0- 90 5330 100.0 Test report: 4L-P-D-04-SOF-X-CX-35K-D100.IES CATALOG NUMBER: RP-AD-04L-04-SOF-35K-D05-CWM-IND-D10-1CWQ-120 90-180 0-180 0 5330 4L-P-D 75˚ 3 OF 9 60˚ 0.0 100.0 TOTAL INPUT WATTS = 56.5 1500 CANDELA DISTRIBUTION FLUX EFFICACY 0.0= 94.3 45.0 Lm/W 90.0 135.0 180.0 45˚ CIE 0 TYPE 764- DIRECT 764 764 764 764 PLANE 0-DEG 733 90-DEG 5 811 801 : 772 716 73 SPACING CRITERIA 15 899 853 : 7381.2 637 1.2 610 210 PLANE 0-DEG 537 90-DEG 25 920 862 : 665 520 320 LUMINOUS 35 809LENGTH 794 :48.000 563 4474.000 444 379 2250 45 596 639 445 358 362 371 LUMINANCE DATA IN CANDELA/SQ METER 55 384 446 319 269 267 306 0˚ 15˚ 30˚ ANGLE AVERAGE 65 220 269AVERAGE 201 AVERAGE 182 170 212 LEGEND: IN 90-DEG 0-deg: 75DEG 1070-DEG 130 45-DEG 101 98 87 114 45-deg: 45 14620. 13958. 13627. 85 28 32 22 26 22 31 90-deg: 12536. 90 55 13676. 0 0 13000. 0 0 0 65 12297. 11858. 11323. 75 10289. 10009. 9666. ZONAL LUMEN SUMMARY 6482. 6944. 6944. ZONE85 LUMENS %FIXT 0- 30 602 29.9 040 982 48.7 Fixture: 4L-R-AD-XX-XX-ASYM-CX-35K-D050 THIS REPORT IS BASED ON PUBLISHED INDUSTRY PROCEDURES. 0- 60 1658 82.3 FIELD PERFORMANCE MAY DIFFER FROM LABORATORY PERFORMANCE. 90˚ 0- 90 2016 100.0 CCT: 3500K 90-180 0 0.0 Output: D050 0-180 2016 100.0 Nominal lumens: 500 lumens/ft EFFICACY = 107.8 lm/W CIE TYPE - DIRECT Efficacy: 107.8 lm/W PLANE : 0-DEG 90-DEG SPACING CRITERIA : 1.53 1.20 Test report: 4L-R-AD-XX-XX-ASYM-CX-35K-D050.IES LUMINOUS LENGTH : 4.500 48.000 HEIGHT OF SIDE : 5.000 75˚ 180-DEG 0.95 300 60˚ 5.000 LUMINANCE DATA IN CANDELA/SQ M ANGLE AVERAGE AVERAGE AVERAGE IN DEG 0-DEG 90-DEG 180-DEG 45 2865. 4090. 1740. 55 1857. 3474. 1291. 65 1104. 2790. 853. 75 576. 2016. 469. 85 168. 827. 132. Zone 0-40 0-60 0-90 90-180 0-180 Zonal Lumens Lumens Lamp % 1885.8 47.1% 3214.6 80.4% 4000.1 100.0% 0.0 0.0% 4000.1 100.0% Zone 0-40 0-60 0-90 90-180 0-180 Zonal Lumens Lumens Lamp % 982 48.7% 1658 82.3% 2016 100.0% 0 0.0% 2016 100.0% 600 45˚ 900 0˚ LEGEND 0-deg 90-deg 180-deg 15˚ 30˚ THIS REPORT WITH THE USE OF THE NVLAP LOGO SHALL NOT BE USED BY THE CLIENT TO CLAIM PRODUCT CERTIFICATION, APPROVAL, OR ENDORSEMENT BY NVLAP, NIST, OR ANY AGENCY OF THE FEDERAL GOVERNMENT. Quick Find litecontrol.com Page 6/6 Rev. 10/10/17 © 2017 Litecontrol, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 65 Spring Street Plympton, MA 02367 / Tel 781.294.0100 / Website www.litecontrol.com 4L-P-D LED / 4L-P-D