510 0019 Power Tune Duals 2009 Up Instructions
User Manual: Pdf Instruction Sheets | S&S Cycle
Open the PDF directly: View PDF
.
Page Count: 3

S&S® Cycle, Inc.
14025 County Highway G PO Box 215
Viola, Wisconsin 54664
Technical Service Phone: 608-627-TECH (8324)
Technical Service Email: sstech@sscycle.com
Website: www.sscycle.com
S&S Power Tune Duals for Touring Models
2009–Up (PN 550-0004 and 550-0143)
IMPORTANT NOTICE:
WARNING
CAUTION
NOTE
WARRANTY:
ADDITIONAL WARRANTY PROVISIONS:
SAFE INSTALLATION AND OPERATION RULES:
DISCLAIMER:
Instruction 510-0019
01-04-13

2
ATTENTION INSTALLER (if other than owner):
INTRODUCTION
NOTES:
This system may not be compatible with swing arm pivot suspension stabilizers.
Right side oorboard must be mounted in the lowest position.
2010 Street Glide®/Road Glide® Custom models with OEM 2-1 exhaust system will require the purchase of the following Harley-Davidson® components:
65296-95A (hanger bracket), 65724-85 (rubber isolator), 65723-85 (exhaust clamp)
Ground and cornering clearance may be reduced. Clearance will be reduced when bikes are tted with shorter shocks.
TOOLS REQUIRED
PROCEDURE
2
2
New conical port gaskets (H-D 65324-83B) (S&S 106-5029) must be used to avoid leaks.
To ensure there are no leaks and the system is properly aligned the front and rear port nuts must be evenly torqued.
WARNING
CAUTION
CAUTION

3
Carefully read the enclosed Important Notice sheet. Re-jetting and or recalibration may be required.
Check all mounting hardware to be sure it is tight before and after rst operation of motorcycle. Periodically, check tightness of all
mounting hardware.
USE AND CARE:
Cover ends of muers when washing motorcycle. Muers may internally corrode if saturated with water and allowed to sit.
CONTENTS
Description ........................................ Qty
1
1
1
1
1
1
10
1
4
4
2
2
22
22
22
22
2
2
To change up your
look, replaement
Heat Sheilds are
also available!
CAUTION
WARNING
CAUTION