5.3.1.2 Packet Tracer Skills Integration Challenge Instructions

5.3.1.2%20Packet%20Tracer%20-%20Skills%20Integration%20Challenge%20Instructions

User Manual: Pdf

Open the PDF directly: View PDF PDF.
Page Count: 2

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 2
Packet Tracer - Skills Integration Challenge
Topology
Addressing Table
Device
Interface
IP Address
Subnet Mask
S1
VLAN 1
10.10.10.2
255.255.255.0
PC1
NIC
10.10.10.10
255.255.255.0
PC2
NIC
10.10.10.11
255.255.255.0
Scenario
The network administrator asked you to configure a new switch. In this activity, you will use a list of
requirements to configure the new switch with initial settings, SSH, and port security.
Requirements
Configure S1 with the following initial settings:
- Hostname
- Banner that includes the word warning
- Console port login and password cisco
- Encrypted enable password of class
- Encrypt plain text passwords
- Management interface addressing
Configure SSH to secure remote access with the following settings:
- Domain name of cisco.com
- RSA key-pair parameters to support SSH version 2
- Set SSH version 2
- User admin with secret password ccna
- VTY lines only accept SSH connections and use local login for authentication
Configure the port security feature to restrict network access:
- Disable all unused ports.
Packet Tracer - Skills Integration Challenge
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 2
- Set the interface mode to access.
- Enable port security to allow only two hosts per port.
- Record the MAC address in the running configuration.
- Ensure that port violations disable ports.

Navigation menu