Installation Directions

2014-07-04

: Pdf 538016-Installationsheet 538016-InstallationSheet 019813 Batch5 unilog

Open the PDF directly: View PDF PDF.
Page Count: 1

SWIVEL30 INSTALLATION INSTRUCTIONS
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper
grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT
AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining xture. No user serviceable
parts inside.
Thank you for buying RAB lighting xtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments. Call
the Marketing Department at 888-RAB-1000, or email: marketing@rabweb.com
SWIVEL30
30 Degree Swivel for WPLED10, WPLED13 & WPLED20 (Fixtures sold separately).
CAUTION: Follow mounting orientation restrictions on xture instructions.
1. Remove Door from xture. Remove Junction Box from xture.
2. Feed wires from the SWIVEL30 into the xture. Make wiring connections inside the xture using UL approved
connectors.
3. Mount the SWIVEL30 to the xture with four Housing Screws. Use the provided nuts and washers for two of the four
Housing Screws as shown below. Replace Door. Tighten all door screws and check seal of door gasket.
4. Mount Junction Box to the wall. Make supply wiring connection with UL approved connectors.
5. Mount xture with SWIVEL30 to the Junction Box with the four Box Screws. Check Gasket seal all the way around
the Junction Box. To ensure weatherproof seal, apply weatherproof silicon sealant to all unused plugs and holes.
6. Adjust swivel to angle desired and tighten all screws.
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
SWIVEL30 IN 0910
Easy Installation & Product Help
LPACK
(not supplied)
Gasket
Housing
Screws (4)
SWIVEL30
Door
Box
Screws (4)
Nuts and
washer for
Housing
Screws
Junction
Box

Navigation menu