56234 Catalog
2014-09-08
: Pdf 56234-Catalog 56234-Catalog 783166 Batch5 unilog
Open the PDF directly: View PDF .
Page Count: 24
Download | |
Open PDF In Browser | View PDF |
.c om ua ls an tM ar lP ca tri lec .E w ww Contactors, Starters, Two-speed Controllers Table Of Contents Introduction .............................................................2 .c om Reliable Contactors, Starters, and Two-speed Controllers With Broad Industry Acceptance ua ls Definite Purpose Controls-Description .......................................3 Contactors: 20-, 25-, and 30-ampere, One- and Two-pole, Compact Design ..................4 25-, 30-, and 40-ampere, Two-, Three-, and Four-pole .........................5 50- and 60-ampere, Two- and Three-pole ...................................6 75- and 90-ampere, Two- and Three-pole ...................................7 120- and 150-ampere, Two- and Three-pole ... . .. ... . . .. ... ... . ... .. .. .. ....8 an Starters: 25-, 30-, and 40-ampere, Single- and Three-phase ............................9 50- and 60-ampere, Single- and Three-phase ...............................10 Two-speed Controllers: 25-, 30-, and 40-ampere ................................................11 50-, 60-, 75-, and 90-ampere ............................................12 tM Technical Data: Technical Data Table ..................................................13 ULand CSA References ................................................13 Shipping Weights .....................................................13 Heater Selection Information ...........................................14-15 ar Field Installation Kits .....................................................16 Dimensions .........................................................17-22 lP Quality Products For All Your Control Needs .................................23 Introduction : ca Serving industry for over 30 years, GE continues to offer definite purpose control components that provide the depen dability required on today's air conditioning, heating and refrigeration, data processing, power supply, food processing, agricultural, and other industrial equipment.Contactors, tri starters, and 2-speed controllers reflect quality materials and workmanship resulting in products with broad industry accep· tance.Backed by design knowledge and experience, GE definite purpose components offer high reliability for a wide variety of tified by CSA. lec applications.All carry UL component recognition and are cer· Look at these customer-oriented features and benefits: • Universal mounting plate with multiple holes makes it easy to interchange with other manufacturers' devices. .E • Bold, easy-to-read terminal markings simplify installation and field maintenance. • Straight-through wiring helps speed installation. • Wiring time is reduced because it is not necessary to loop or bend leads around the device. w • Connections are further simplified with standard combination ww screw and quick-connect power and coil terminals. 2 • Moisture-resistant coils protect contactors from dirt and moisture. • Precision, self-aligning magnets add to quiet, dependable • • operation. Inspection of durable, double-break contacts is performed easily without removal of contactor. Housing design offers high arc tracking resistance and dielectric strength. • Corrosion-resistant materials used throughout. • Arc confining cover (except CR353C compact design). • • Replaceable contacts and coils (except for CR353C compact design). New Class B coil for higher ambient operation on contactors up to 60 FLA. This bulletin provides detailed technical information for easy, accurate selection of all GE definite purpose controls. Simplified charts for all basic models include all available fac tory modification for your exact requirements.Field modifica tion kits and replacement parts are also included for easy selection. • 20 through 150 ampere. • 600-volt rated. .c om Contactors • Silver cadmium oxide contacts for dependable service and long life. • Molded coils to protect against damage and resist moisture.CD ua ls • Arc confining cover also protects against contimants. CD • Standard terminations: - Binding head screw with double quick connect terminals on 20·, 25·, and 30-ampere ratings. -Box lugs with double quick connect terminals on 40· through 90-ampere ratings. -Pressure connectors on 120- and 150-ampere ratings. an • Replaceable coil and contacts. CD • Clearly visible nameplates. • Enclosure kits available.CD CD Does not apply to CR353C contactors. tM Starters • 25- through 50-ampere. • 600-volt rated. ar • Single- and 3-phase forms. • Standard or ambient compensated overload relays. • 25- through 90-ampere. • 600-volt rated. • For single- or two-winding motor application. • Standard features include mechanical and cross-electrical interlocking. ww w .E lec Two-speed Controllers tri ca lP • Straight through wiring. • Enclosure kit available. 3 .c om 20-, 25-, and 30-ampere, 1- and 2-pole Compact Design - Open Type ua ls CR353 1-pole Standard Open Type Ampere Ratings Inductive Full Load 277V 480V 600V Resistive Per Pole 20 25 30 120 150 150 100 125 125 80 100 100 30 35 40 Catalog Number CR353CA1A*1 CR353CB1A*1 CR353CC1A*1 an Locked RotorCD 1-pole Plus Shunted Pole Ampere Ratings 20 25 30 277V 480V 600V Resistive Per Pole 120 150 150 100 125 125 80 100 100 30 35 40 Standard Open Type Catalog Number 2-pole Ampere Ratings CR353CA3A*1 CR353CB3A*1 CR353CC3A*1 277V 480V 600V Resistive Per Pole 20 25 30 120 150 180 100 125 150 80 100 120 30 35 40 lP * Insert letter from Coil Selection Table below. CD Refer to page 13 for stalled rotor recycle ratings. Locked RotorCD Inductive Full Load ar Inductive Full Load Locked RotorCD tM * Insert letter from Coil Selection Table below. CD Refer to page 13 for stalled rotor recycle ratings. Standard Open Type Catalog Number CR353CA2A*1 CR353CB2A*1 CR353CC2A*1 * Insert letter from Coil Selection Table below. CD Refer to page 13 for stalled rotor recycle ratings. Inrush VA (Nominal) Voltage Letter Code c 50Hz 24 110-120 208-240 277 440-480 24 110 208-220 Sealed VA (Nominal) Sealed Watts (Nominal) 60Hz 50Hz 60Hz 50Hz 60Hz 50Hz 35 42 42 42 42 42 50 50 50 50 7.0 8.5 8.5 8.5 8.5 8.5 10.2 10.2 10.2 10.2 3.0 3.6 3.6 3.6 3.6 3.2 3.85 3.85 tri A B F 60Hz - 380-440 lec H ca AC Coil Selection Table - 3.85 Resistance Ohms ± 10% 11 210 790 1240 3550 Factory Modifications .E Terminals: Change letter in 9th position (CR353CA2AH1) Binding Head Screw With Quick Connect Terminals ......................A Screw with Pressure Plate w With Quick Connect Terminals . . . . . . . . . . . . . . .. . . . .. . E Auxiliary Contacts: Letter "A" in 12th position (CR353CA2AH1A) Indicates no auxiliary contacts. If auxiliary contacts are re quired, refer to CR353A forms. Omit "A" if customer part number is not required. Customer Part Number: Add letter in 13th position (CR353CA2AH1AB) ww Terminal Markings: Number "1" in 1 1th position (CR353CA2AH 1) Indicates Line ("L") markings at Top/Load ("T") markings at bottom 4 Customer Part Number on device and carton label . . . .B .c om 20-, 30-, and 40-ampere, 2-, 3- and 4-pole Open Type Ampere Ratings Inductive Full Load Locked Rotor Standard Open Type Number Of Poles CD Resistive Per Pole ua ls - Catalog Number 480V 600V 25 150 125 100 35 2 3 4 CR353AB2A*1 CR353AB3A*1 CR353AB4A*1 30 180 150 120 40 2 3 4 CR353AC2A*1 CR353AC3A*1 CR353AC4A*1 40 240 200 160 50 2 3 4 CR353AD2B*1 CR353AD3B*1 CR353AD4B*1 tM 240V an CR353A * Insert letter from Coil Selection Tables below. information on 5-pole Forms, refer to your nearest GE Electrical Distribution & Control sales office. G) For 50Hz 60Hz 24 (2, 3-pole) 24 24 24 (4-pole) 110-120 110-120 208-240 208-240 277 416-480 416-480 550 575-600 A B F c D DC Coil Selection Table® 68 87 87 87 - 87 87 60Hz 50 Hz 60Hz 50 Hz 7 10 10 10 10 10 10 7.4 12 12 12 2.3 4.0 4.0 4.0 4.0 4.0 4.0 2.7 4.6 4.6 4.6 - 12 12 5.61 3.9 4 89.5 366.0 713.0 1872.0 29 83.0 - 4.6 4.6 Resistance Ohms ±10% Inrush VA (Nominal) Sealed VA (Nominal) Sealed Watts (Nominal) Inrush Sealed 12-14 VDC 24-28 VDC 120 VDC 54 54 140 2.34 2.34 5.16 2.34 2.34 5.16 2.9 8 12.6 9 8.4 61.6 283.0 2783.0 tri p lec R Resistance Ohms ±10% Voltage Letter Code s 60 77 77 77 77 77 77 ca H H 50 Hz lP 60Hz Sealed Watts (Nominal) Sealed VA (Nominal) Inrush VA (Nominal) Voltage Letter Code ar AC Coil Selection Table ® Includes factory wired coil switch. Factory Modifications .E Terminals: Auxiliary Contacts: Change letter in 9th position (CR353AC3AH1} Add letter in 12th position (CR353AC3AH1B) Binding Head Screw With Quick Connect Terminals ...................... A Without Quick Connect Terminals . . . .C Box Lug With Quick Connect Terminals . . .. . . . . B Without Quick Connect Terminals . . . . . .. D . . . . . w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . None 10 Amp, 250 Vac SPDT® on left side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Customer Part Number: ww No terminal markings . . . . . . 00 Line ("L") markings at Top/Load ("T") markings at bottom .. 1 Load ("T") markings at Top/Line ("L") markings at bottom 2 0 Omit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . A® . .B 600-volt rating, select a device with additional power pole. Add letter in 13th position (CR353AC3AH1BB) . . . Change number in 1 1th position (CR353AC3AH1) . . . ®Omit "A" if additional modification is not required. ® For Terminal Markings: . . . Customer Part Number on device and carton label . . . . . . . . B . "0" if additional modifications are not required. 5 .c om 50- and 60-ampere, 2- and 3-pole Open Type Ampere Ratings Inductive Full Load Locked Rotor Standard Open Type Number Of Poles Resistive Per Pole ua ls - Catalog Number 240V 480V 600V 50 300 250 200 62 2 3 CR353FE2B*1 CR353FE3B*1 60 360 300 240 75 2 3 CR353FF2B*1 CR353FF3B*1 an CR353F AC Coil Selection Table A B F c D 60Hz 50Hz 60Hz 24 110-120 208-240 277 440-480 575-600 24 110-120 208-240 100 100 100 100 100 100 - 380-416 550 Voltage p s CD Includes factory wired coil switch. Terminals: 60Hz 50Hz 60Hz 50Hz 11 11 11 11 11 11 14 14 14 8 8 8 8 8 8 9.4 9.4 9 .4 - 14 14 Inrush VA (Nominal) Sealed VA (Nominal) Sealed Watts (Nominal) 110 110 110 3.8 3.8 3.8 3.8 3.8 3.8 lec Factory Modifications - 119 119 Sealed Watts (Nominal) - 9.4 9.4 Resistance Ohms .E . Sealed 1.85 37.6 153.0 2519.0 5.2 133.0 . . . . . . . . . None............................... ..A(j) 10 Amp, 250 Vac SPDT on left side .. . ..... . . .. .. . B 10 Amp, 600 Vac, 1-NO on left side . .... . .... . ...G . . (j) Omit "A" . . . . . . . . if additional modification is not required. . Terminal Markings: Customer Part Number: Change number in 1 1th position (CR353FE3BH1) Add letter in 13th position (CR353FE3BH1BB) w No terminal markings .. . . . . . . .. . . .. . . .. .... . .... 0® Line ("L") markings at Top/ Load ("T") markings at bottom . 1 Load ("T") markings at Top/Line ("L") markings at bottom .2 ww + 10% Inrush Add letter in 12th position (CR353FE3BH1B) Binding Head Screw With Quick Connect Terminals . ....... . . . . . .. ..A Without Quick Connect Terminals ..... .... . . .. . . ..C Box Lug With Quick Connect Terminals . . ....... . ... .... . .. B Without Quick Connect Terminals ... . .... . . . . .......D 6 2.75 64.3 241.0 389.0 9 7 2.0 2074.0 Auxiliary Contacts: Change letter in 9th position (CR353FE3BH1) 0 Omit Resistance Ohms ±10% tri 12 VDC 24 VDC 115 VDC R 119 119 119 ca DC Coil Selection Table CD Letter Code 50Hz lP H Sealed VA (Nominal) Inrush VA (Nominal) Voltage ar Letter Code tM * Insert letter from Coil Selection Tables below. "0" if additional modifications are not required. . . . . . . . I Customer Part Number on device and carton label . . . ... . . B .c om 75- and 90-ampere, 2- and 3-pole Open Type Ampere Ratings Inductive Full Load Standard Open Type Number Of Poles Resistive Per Pole Catalog Number 240V 480V 600V 75 450 375 300 90 2 3 CR353EG2B*1 CR353EG3B*1 90 540 450 360 90 2 3 CR353EH2B*1 CR353EH3B*1 Insert letter from Coil Selection Tables below. AC Coil Selection Table D 110 220 - 440 550 Voltage p 12 VDC 24 VDC 115 VDC s CD 263 263 - 263 263 50Hz 60Hz 50Hz 40 40 40 40 40 40 16 16 16 16 16 16 - 51 51 - 51 51 Resistance Ohms ±10% 1.46 28.7 109 .0 169.0 547.0 655.0 - 19 19 - 19 19 Resistance Ohms ± 1 0% Inrush VA (Nominal) Sealed VA (Nominal) Sealed Watts (Nominal) Inrush Sealed 275 275 275 11.5 11.5 11.5 11.5 11.5 11.5 .54 2.13 47.1 12.7 51.9 1133.0 tri R 60Hz - ca DC Coil Selection TableCD Letter Code 50Hz 233 233 233 233 233 233 - lP c 60Hz 50Hz 24 115-120 208-240 277 460 600 ar 60Hz H A B F Sealed Watts (Nominal) Sealed VA (Nominal) Inrush VA (Nominal) Voltage Letter Code tM * Locked Rotor ua ls - an CR353E Includes factory wired coil switch. Terminals: lec Factory Modifications Auxiliary Contacts: Change letter in 9th position (CR353EG3BH1) Binding Head Screw With Quick Connect Terminals Without Quick Connect Terminals Box Lug With Quick Connect Terminals Without Quick Connect Terminals .E . . . . Add letter in 12th position (CR353EG3BH1B) None 10 Amp, 250 Vac SPOT on left side 10 Amp, 600 Vac, 1-NO, 1-NC on left side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A C B D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Add letter in 13th position (CR353EG3BH1BB) w Customer Part Number: Change number in 1 1th position (CR353EG3BH1) . . . . . . . . . . . . . . . . . ww (2) Omit "0" if additional modifications are not requ1red . . . . . . . . . . . . . . . . . . 0® 1 2 B 0 ®Omit "A" if additional modification is not required. Terminal Markings: No terminal markings Line ("L") markings at Top/Load ("T") markings at bottom Load ("T") markings at Top/Line ("L") markings at bottom A® . . Customer Part Number on device and carton label . . . . . . . . B 7 .c om 120- and 150-ampere, 2- and 3-pole Open Type Ampere Ratings Locked Rotor Inductive Full Load * Resistive Per Pole ua ls - Standard Open Type Number Of Poles Catalog Number 240V 480V 600V 120 720 600 480 120 2 3 CR353GJ2A*1 CR353GJ3A*1 150CD 900 750 600 150 2 3 CR353GK2A* 1 CR353GK3A*1 an CR353G Insert letter from Coil Selection Table below. CD For information on higher ratings, refer to your nearest GE Electrical Distribu tM tion & Control sales office. Voltage D 60Hz 50Hz 115-120 230-2 40 460- 480 575-600 110 220 440 550 Factory Modifications 1150 1150 1150 1150 12 17 12 17 12 17 12 17 Change letter "A" in 9th position (CR353GJ2AB1) Indicates Pressure Type Terminals lec l Terminal Markings: Change number "1" in 1 1th position (CR353GJ2AB1) .E Indicates Line ("L") markings at Top/Load ("T") markings at bottom Auxiliary Contacts: Add letter in 12th position (CR353GJ3AB1B) None . . ... . . . . . . . . . . . . . . . . . . . . . .. . . . .. .. . . . . . . . .. A2 10 Amp, 600 Vac, 1 NO . .. . . . . . . . .. . . . . . . . . . . . .. .. . .B 10 Amp, 600 Vac, 1 NC .............................C 10 Amp, 600 Vac, 1 N0 1 NC ........................ D w - "A" if additional modification is not required. ww ®Omit 8 Sealed VA (Nominal) 60/50Hz 150 Amp tri Terminals: 60/50Hz 120Amp ca A 8 c Inrush VA (Nominal) 120Amp lP Letter Code ar AC Coil Selection Table . 80 80 80 80 Sealed Watts (Nominal) Resistance Ohms ±10% 60/50Hz 150Amp 120Amp 150Amp 120Amp 150Amp 85 85 85 85 1 8.4 1 8. 4 1 8.4 1 8.4 1 8.8 1 8. 8 1 8. 8 1 8. 8 2.11 10.6 41. 8 67.0 2.02 10. 4 41.7 6 4.4 Customer Part Number: Add letter in 13th position (CR353GJ3AB 1 BB) Customer Part Number on device and carton label . . . . . .. . B .c om 25-, 30-, and 40-ampere, Single- and Three-phase Open Type Ampere Ratings Locked Rotor 25 480V 125 150 30 Poles 100 1 1 3 3 2 2 3 3 120 1 1 3 3 2 2 3 3 160 1 1 3 3 2 2 3 3 150 180 40 Phase 600V 200 240 - 1 - 1 With Ambient Compensated Overload Relay Catalog Number Catalog Number 1 1 3 3 CR354AB2A*3 CR354AB2A*3B CR354AB3A*3 CR354AB3A*38 CR354AB2A*4 CR354AB2A*48 CR354AB3A*4 CR354AB3A*4B - 1 1 1 3 3 CR354AC2A*3 CR354AC2A*38 CR354AC3A*3 CR354AC3A*3B CR354AC2A*4 CR354AC2A*4B CR354AC3A*4 CR354AC3A*4B - 1 - 1 1 1 3 3 CR354AD28*3 CR354AD28*3B CR354AD38*3 CR354AD38*38 CR354AD28*4 CR354AD28*4B CR354AD38*4 CR354AD38*4B - 1 lP ar * Insert letter from Coil Selection Table below. CD Rated 10 Amp, 250 Vac. With Standard Overload Relay OverLoad Relays an 240V NO Aux_ ContactCD tM Inductive Full Load ua ls CR354A - Open Type Terminals: tri ca 25 and 30 Ampere Ratings have binding screw terminals. 40 Ampere Ratings have box lug type. AC Coil Selection Table H Sealed VA (Nominal) Sealed Watts (Nominal) 60Hz 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz 50Hz 24 110-120 208-240 277 4 16-480 24 110- 120 208-240 60 77 77 77 77 68 87 87 7 10 10 10 10 7.4 12 12 2.3 4.0 4.0 4.0 4.0 2.7 4.6 4.6 -- 4 16-480 - 87 - 12 - 4.6 Resistance Ohms ± 10% 5.61 89.5 366.0 713.0 1872.0 .E A 8 F c Inrush VA (Nominal) Voltage lec Letter Code Factory Modifications Overload Relays: w Change letter in 1 1th position (CR354AC3AB3) ww Standard-Unwired Ambient Compensated-Unwired Standard-Wired Ambient Compensated-Wired . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 3 . . . . . . . . . . . . . . . . . . . . . . . . . 4 . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . .... . . . .. . . . 9 .c om 50- and 60-ampere, Single- and Three-phase ua ls CR354F - Open Type Open Type Ampere Ratings Locked Rotor 240V 50 480V 250 300 60 360 Phase Poles 200 1 1 3 3 2 2 3 3 240 1 1 3 3 2 2 3 3 600V 300 With Ambient Compensated Overload Relay - Catalog Number Catalog Number 1 - 1 1 3 3 CR354FE2B*3 CR354FE28*3B CR354FE38*3 CR354FE3B*3B CR354FE28*4 CR354FE28*4B CR354FE3B*4 CR354FE38*4B 1 - 1 1 1 3 3 CR354FF28*3 CR354FF28*3B CR354FF3B*3 CR354FF38*3B CR354FF28*4 CR354FF28*4B CR354FF38*4 CR354FF38*4B - 1 tM * Insert letter from Coil Selection Table below. With Standard Overload Relay OverLoad Relays NO Aux. Contact G) an Inductive Full Load lP ar G) Rated 10 Amp, 250 Vac. Terminals: tri ca 50 Ampere ratings have box lug type. AC Coil Selection Table 60Hz 24 110-120 208-240 277 440-480 Sealed VA (Nominal) 60Hz 50Hz 60Hz 50Hz 60Hz 50Hz 24 110-120 208-240 100 100 100 100 100 119 119 119 11 11 11 11 11 14 14 14 8 8 8 8 8 9.4 9.4 9.4 -- 380-4 16 - 1 19 Factory Modifications Overload Relays: w Change number in 11th position (CA354FE3BB3) ww Standard-Unwired . . Ambient Compensated-Unwired Standard-Wired Ambient Compensated-Wired . 10 . . . . . . . . . . . . Sealed Watts (Nominal) 50Hz .E H A B F c Inrush VA (Nominal) Voltage lec Letter Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 3 .. . .. . . . . 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 14 - 9.4 Resistance Ohms ±10% 2.75 64.3 241.0 389.0 972.0 .c om 25-, 30-, and 40-ampere, Two-speed Controllers Standard Open Type® Number Of Poles Locked Rotor Inductive Full Load 240V 480V 600V 25 150 125 100 2-3 3-3 5-3 CR355AB2A*1B CR355AB3A*1B CR355AB5A* 1B 30 180 150 120 2-3 3-3 5-3 CR355AC2A* 1B CR355AC3A*1B CR355AC5A*1B 40 240 200 160 2-3 3-3 5-3 CR355AD2B*1B CR355AD3B*1B CR355AD5B* 1B Catalog Number tM an Ampere Ratings ua ls - Open Type CR355A lP ar * Insert letter from Coil Selection Table below. Note: Controllers shown are limited to 240 Vac coil rating. For controllers with higher coil ratings, refer to the nearest GE Electrical Distribution & Control sales office. CD All 2-speed controllers include mechanical and electrical interlocking. For control of 2-speed single-winding motors, use 5 3-pole or 2 3-pole and separate 3-pole contactor. AC Coil Selection Table H H 50Hz Resistance Ohms ± 1 0% 60Hz 50Hz 60Hz 50Hz 60Hz 50Hz 60 77 77 77 68 87 87 87 7 10 10 10 7.4 12 12 12 2.3 4.0 4.0 4.0 2.7 4.6 4.6 4.6 24 (2, 3-pole) 24 24 (5-pole) 24 110- 120 110- 120 208-240 208-240 ., Sealed Watts (Nominal) 5.61 3.94 89.5 366.0 tri A B I ca 60Hz Sealed VA (Nominal) Inrush VA (Nominal) Voltage Letter Code Terminals: lec Factory Modifications Terminal Markings: Change letter in 9th position (CR355AB2BH1B) Binding Head Screw With Quick Connect Terminals . . Without Quick Connect Terminals Box Lug With Quick Connect Terminals . . Without Quick Connect Terminals . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No terminal markings 0 Line ("L") markings at Top/Load ("T") markings at bottom ....1 . . . . . . A . . . . . . . . . . . . . . . . . . . . . . C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B D ww w .E . Change number in 11th position (CR355AB2BH1B) 11 .c om 50-, 60-, 75- and 90-ampere, Two-speed Controllers Open Type Ampere Ratings Inductive Full load Locked Rotor ua ls - Standard Open Type® Number Of Poles Catalog Number 240V 480V 600V 50 300 250 200 2-3 3-3 CR355EE28*1C CR355EE38*1C 60 360 300 240 2-3 3-3 CR355EF28*1C CR355EF38*1C 75 450 375 300 2-3 3-3 CR355EG28*1C CR355EG38*1C 90 540 450 360 2-3 3-3 CR355EH28*1C CR355EH38*1C an CR355E Q) All 2-speed controllers include mechanical and electrical interlocking. For tM * Insert letter from Coil Selection Tables below. Note: Controllers shown are limited to 240 Vac coil rating. For controllers with higher coil ratings, refer to the nearest GE Electrical Distribution & Control sales office. letter Code lP AC Coil Selection Table CR355E 50- and 60-ampere 2-speed Controllers Inrush VA (Nominal) Voltage 50Hz 24 115-120 208-240 - 184 184 184 50Hz - 208 208 Sealed VA (Nominal) 60Hz Sealed Watts (Nominal) 50 Hz 32 32 32 - 41 41 60Hz 50Hz 12 12 12 14 14 - Resistance Ohms ±10% 1.46 28. 7 109.0 tri 110 220 60Hz ca 60Hz H A 8 ar control of 2-speed single-winding motors, use 2-3-pole form and a separate 3-pole contactor. lec AC Coil Selection Table CR355E 75- and 90-ampere 2-speed Controllers Voltage letter Code 60Hz 24 115-120 208-240 50Hz - 110 220 .E H A 8 Terminals: Indicates box lug type terminals. ww I w Letter "B" in 9th position (CR355EE2B11C) 12 Sealed VA (Nominal) Inrush VA (Nominal) 60Hz 233 233 233 50Hz - 263 263 60Hz 40 40 40 Sealed Watts (Nominal) 50Hz - 51 51 60Hz 50Hz 16 16 16 19 19 - Resistance Ohms ± lOo/o 1.02 25.2 95.6 .c om Technical Data CR 353 CR 354 CR 355 Induetive Resistive AB AB AB 25 AC AD AC AD AC AD 30 40 35 40 CA 20 25 CB cc 240V 480V 600V 240V 125 150 100 120 150 180 50 150 180 240 200 160 30 120 100 80 35 150 125 100 480V Part Winding 600V 240 125 CD 150 CD 2oo CD 10o CD 120 CD 160 CD 120 CD 10o CD 8o CD 100 60 40 150 CD 70 125 CD 100 CD 150 CD 75 125 CD 100 CD 125 150 45 240V 480V 150 125 100 180 150 192 120 192 - 600V 160 - - 50 - - 150 120 EE 50 62 300 250 200 - - - 300 250 200 EF 60 75 360 300 240 - - - 360 - - EG EH 75 90 90 90 450 540 375 450 300 - - - 360 - - - 450 540' 375 450 300 360 62 300 250 200 - 75 360 300 240 - GJ GK 120 150 120 150 720 900 600 750 600 480 tM 180 60 - - 300 250 200 - - 360 300 240 600 750 480 600 - - - - - - ca CD These ratings apply where the contactor is not required to make and break line ® 24 Volt coils 2- and 3-pole forms pickup at 75% or less of nominal coil voltage. ® For box lug and pressure type terminals. 720 900 AB AC AD CR 355 AB AC AD � CA CB cc EG EH FE FF ww GJ GK FE FF 8-16 8-16 4-14 35 lb.-in. 8-16 50% or less of nominal nominal coil voltage coil voltage 85% or less of 55% or less of 8-16 2-14 nominal nominal coil voltage coil voltage 85% or less of nominal coil voltage 55% or less of nominal coil voltage 110-14 1/0-14 85% or less of nominal 60% or less of nominal 2-14 coil voltage coil voltage 85% or less of nominal 65% or less of nominal coil voltage coil voltage Family CR Vol. Section Issued File Guide Class 2 2 2 52 51 21 09/26/74 09/25/74 02/09/67 LR15492 LR15492 LR15492 361-E-0.2 361-E-0.2 361-E-0.2 1222 01 1222 01 1222 01 E1811 E1811 E1811 2 2 2 50 50 50 08/09/75 08/09/75 08/09/75 LR15492 LR15492 LR15492 361-E-0.2 361-E-0.2 361-E-0.2 1222 01 1222 01 1222 01 E1811 E1811 E1811 2 2 2 76 76 76 02/08/80 02/08/80 02/08/80 LR15492 LR15492 LR15492 361-E-0.2 361-E-0.2 361-E-0.2 1222 01 1222 01 1222 01 EE EF E1811 E1811 2 2 26 25 03/10/70 01/22/70 LR15492 LR15492 361-E-0.2 361-E-0.2 1222 01 1222 01 EG EH E1811 E1811 2 2 24 30 10/15/68 06/01/74 LR15492 LR15492 361-E-0.2 361-E-0.2 1222 01 1222 01 E1811 E1811 2 2 54 54 06/17/75 06/17/75 LR15492 LR15492 361-E-0.2 361-E-0.2 1222 01 1222 01 E1811 E1811 3 3 6 5 10/15/68 05/26/76 LR15492 LR15492 361-E-0.2 361-E-0.2 1222 01 1222 01 w I CSA Reference File .E AB AC AD coil voltage Terminal Torque® 2-14 2-14 2/0-10 3/0-8 35 lb.-in. 80 lb.-in. 50 lb.-in. 50 lb.-in. 200 lb.-in. Shipping Weights E1811 E1811 E1811 lec I CR 354 tri Underwriters Laboratories Reference Family 50% or less of nominal Wire Size Range AWG connection if the unit recycles under stalled rotor conditions. Underwriters Laboratories and CSA References CR 353 nominal coil voltage 85% or less of 40 50 85% ® or less of - 30 FE FF Dropout Volts Pickup Volts ar FF 3 Ph-2-pole 1 Ph-1-pole 3 Ph-3-pole 1 Ph-2-pole lP EG EH FE Locked Rotor Ampere Ratings Amperes an Family ua ls Definite Purpose Control Technical Data 353AB, AC, 354AB, AC, 355AB, AC, 353CA, CB, 355EE, EF 353EG, EH 355EG, EH 353FE, FF 354FE 353GJ, GK AD AD AD CC Estimated Shipping Weight (Lbs.) 1.5 3.0 4.3 1.0 8.1 4.0 8.1 1.9 3.5 17.5 13 .c om Heater Selection Information a motor of larger rating than the maximum given on the nameplate for the starter. ua ls Heater Selection for StartersCD Single-phase (25-, 30-, 40-, 50-, and GO-ampere) To prevent overloading the starter do not select heater(s) for (Heater amps based on 75°C wire) All heaters are packaged three to a carton. For continuous rated motors, with a service factor of 1.15 to 1.25, select the heater with maximum motor amperes equal to Single-phase (1 Heater Required) or immediately greater than the motor full·load current (pro· Maximum Motor Full Load Amperes vides a maximum of 125 percent protection). For continuous rated motors with no service factor, multiply the full·load cur· 25 Amp Starter heater. To protect the heater and starter during a short circuit, pro· vide motor·branch·circuit protection in accordance with Table 430-152 in Article 430 of the National Electrical Code. In no case should the fuse rating exceed 4 times the motor full·load If full·load amperes of motor falls between two ratings, select These tables are not to be used to select heaters for Hermetic Motor applications. Contact your nearest GE sales office for ww w .E lec tri ca lP information. 14 Heater Cat. No. CR123 5.79 6.12 6.49 6.15 6.47 6.84 6.15 6.47 6.84 C592A C630A C695A 7.59 8.71 9.19 7.59 8.71 9.19 7.59 8.71 9.19 7.72 8.99 9.87 7.72 8.99 9.87 C778A C867A C955A 10.1 11.2 11.9 10.1 11.2 11.9 10.6 12.0 12.3 10.6 12.0 12.3 C1048 C113B C125B 12.6 14.5 17.7 12.6 14.5 17.7 12.6 14.5 17.7 14.0 15.7 17.6 14.0 15.7 17.6 C137B C151B C163B 19.1 21.4 22.9 19.1 21.4 22.9 19.1 21.4 22.9 20.1 23.3 27.0 20.1 23.3 27.0 C180B C198B C214B 24.7 25.0 24.7 25.9 27.1 24.7 25.9 27.1 29.8 32.2 33.9 29.8 32.2 33.9 C228B C250B C273B 30.0 30.2 34.8 40.0 36.7 42.5 46.2 36.7 42.5 46.2 C303B C330B C366B 50.0 50.3 52.4 58.2 60.0 C400B C440B C460B C500B ar heaters for the higher rating. 60 Amp Starter 5.79 6.12 6.49 tM Fuse Rating. 50 Amp Starter 5.79 6.12 6.49 10.1 11.2 11.9 current for single·element fuses, or 2.25 times for dual·element fuses, or the fuse size listed in heater table under Maximum 40 Amp Starter an rent of the motor by 0.90 and use this value to select the 30 Amp Starter --- ----- --- --- --- --- --- --- --- --- --- --- - -- - --- --- --- --- --- --- -- CD Heater selection table applies to Open & Type 1 enclosed starters with standard or ambient compensated overload relays. .c om Heater Selection Information (Continued) Heater Selection for StartersCD Three-phase (40-, 50-, and 60-ampere) (Heater amps based on 75°C wire) (Heater amps based on 75°C wire) All heaters are packaged three to a carton. All heaters are packaged three to a carton. 3-phase (3 Heaters Required) 3-phase (3 Heaters Required) Heater Cat. No. Maximum Motor Full Load Amperes ua ls Heater Selection for StartersCD Three-phase (25- and 30-ampere) Maximum Motor Full Load Amperes Heater Cat. No. CR123 30 Amp Starter CR123 40 Amp Starter 50 Amp Starter 5.00 5.53 6.02 5.00 5.53 6.02 C630A C695A C778A 5.72 6.30 7.04 6.07 6.63 7.35 5.14 5.63 6.26 C630A C695A C778A 6.93 7.30 7.98 6.93 7.30 7.98 C867A C955A C 104B 8.09 8.89 9.78 7.15 7.58 8.39 C867A C955A C 104B 8.77 9.40 10.6 8.77 9.40 10.6 C 1 13B C 125B C 137B 1 1.6 14.0 15.4 1 1.6 14.0 15.4 C 15 1B C 163B C 180B 17.0 18.9 20.3 17.0 18.9 20.3 C 198B C2 14B C228B 2 1.5 23.0 25.0 2 1.5 23.0 25.4 C250B C273B C303B --- 7.91 8.80 9.27 10.8 1 1.8 13.0 9. 1 1 9.67 1 1.0 C 1 13B C 125B C 137B 13. 1 15.5 16.8 14.5 16. 1 17.9 12.0 14.4 16.3 C 15 1B C 163B C 180B 18.0 19.7 2 1.6 19.8 22.0 24.4 17.3 19.3 20.9 C 198B C2 14B C228B 23.9 25.5 28.2 27.1 29.9 34. 1 22.9 24.7 28.0 C250B C273B C303B 31.5 34.7 37.8 38.8 44.3 50.0 32. 1 35.9 4 1.5 C330B C366B C400B 40.0 --- 43.4 46.4 50.9 C440B C460B C500B 56.9 60.0 C550B C600B tM C330B C366B 28. 1 30.0 (i) Heater selection table applies to Open and Type --- -- -- --- --- -- --- --- (i) Heater selection table applies to Open and Type 1 enclosed starters with standard or ambient compensated overload relays. ww w .E lec tri ca 1 enclosed starters with standard or ambient compensated overload relays. 60 Amp Starter 9.99 1 1. 1 12. 1 ar lP --- an 25 Amp Starter 15 .c om Field Installation Kits (Not available for CR353C compact design) Kit Catalog Number 25-60 Amp 75-90 Amp 120-150 Amp SPOT SPOT 1 NO 1 NC 1 N0-1 NC CR353XAAA CR353XAAB CR353XABC CR353XACC CR353XADC H H A B F c Enclosure Kits (Type 1) Kit Catalog Number 25-60 Amp 75-90 Amp 120-150 Amp CR353XE1BB CR353XE1BC ® 20-50 Amp CR353XE1AA -- -- - --- to nearest GE Ee l ctrical Distribution & Control sales office. H A B F c ca Catalog Number CR353AB, AC, AD CR354AB, AC, AD CR355AB, AC, AD .E lec tri CR353XY1 (Package of 10) H A B F c A B c D A B c D Kit Catalog Number 25 30 1 1 55-152313G223 55-152313G071 40 40 50® 600 75 90 3 4 1 1 1 1 55-152313G111A 55-152313G111B 55-152313G216 55-152313G237 55-152313G218 55-152313G217 Box lug with quick connects w 3 3 55-152313G139 55-152313G140 Pressure type 353AD 353AD 353FE 353FF 353EG 353EH 353GJ 353GK CIJ 120 150 ww ®For CR355EE, use 55-152313G150 For CR355EF, use 55-152313G277 - 380-416 55-B23H 55-B23A 55-B23B 55-B23F 55-B23C 24 115-120 208-240 277 440-480 24 110 220 - 440 55-B21H 55-B21A 55-B21B 55-B21F 55-B21C } 24 115-120 208-240 277 460 - 110 220 - 440 55-B22H 55-B22A 55-B22B 55-B22F 55-B22C 115-120 230-240 460-480 575-600 110 220 440 550 55-501336G002 55-501336G003 55-501336G004 55-501336G005 110 220 440 550 55-501463G002 55-501463G003 55-501463G004 55-501463G005 150-amp-CR353GK Number Of Poles Per Kit 353AB 353AC Contactor Rating Amperes 24 110-120 208-240 120-amp-CR353GJ Replacement Contact Kits Family CR: 24 115-120 208-240 277 440-480 75-, 90-amp-CR353EG, EH, CR355EG, EH Double .250" Quick Connect Adapter For Coil Terminals For Use On: 55-B19H 55-B20H 55-B20A 55-B20B 55-B20F 55-B20C 50-, 60-amp-CR355EE, EF lP ® Refer - 24 24 (2-, 3-pole) 24 24 (4-pole) 110-120 110-120 208-240 208-240 277 416-480 416-480 - ar Starter Rating Catalog Number 50- 60-amp-CR353FE, FF, 354FE H A B F c Kit Catalog Number 50hz 60Hz 25-, 30-, 40-amp-CR353AB, AC, AD, 354AB, AC, AD, 355AB, AC, AD Auxiliary contacts for 25- through 90-ampere contactors are rated 10 amp, 250 Vac, '13 Hp@ 125 Vac or 250 Vac. Auxiliary contacts for 120- and 150ampere contactors are rated 7200 VA make, 720 VA break, 10 Amp carry, 600 Vac. Contactor Rating Coil Ratings Volts Letter Code an Auxiliary CD Contact Type tM CD Contactor Rating ua ls AC Replacement Coils Auxiliary Contact Kits For Field Installation Type Of Termination Binding screw with quick connects 115-120 230-240 460-480 575-600 Inches Millimeters "' Est'1mat'mg 0n1y ror CR353C - 20-, 25-, and 30-ampere Contactors (Compact Design) 3.31 - 84.1 p - J ar ��� r----- �� 79.5 2.16 54.9 - MOUNTING HOLES FOR #10 SCREWS (4 PLACES) 2.00 50.8 ca lP 66.7 3.13 tM M 1\ 1 ua ls b tiD r1 an rI 1HD .c om . . D uaI D 1mens1ons Contactor Dimensions tri CR353A and F - 25- Through 60-ampere Contactors .4 1 10.3 3.12 lec 79.4 3.25 82.5 .E 3.75 �r w - "C" .47 1 1.9 _______.., Number c Catalog Number 25-, 30-, 40-amp CR353AB, AC, AD 2, 3 -- -- -- -- 95.3 61.5 83.3 17.5 25-, 30-, 40-amp CR353AB, AC, AD 4 -- -- -- 95.3 78.6 83.3 50-, 60-amp CR353FE, FF 2, 3 -- -- -- -- 95.3 69.8 90.4 12.7 ww Rating Of Poles A 3.75 3.75 3.75 B 2.42 3.09 2.75 3.28 3.28 3.56 D .69 MOUNTING HOLES FOR SCREWS (6 PLACES) #10 .22 -- 5.6 .50 17 . Inches Millimeters .c om Dua I o·1mens1ons Contactor Dimensions (Continued) . . F,or Est1matmg 0nIy ua ls CR353E - 75- and 90-ampere Contactors ,I n 'L ---::r.-=--p " I r ,o I I I 1'=1 :: ,, an 1 I II' I�.\ , --4L r-r1 _J_ 0• 4.28 108.7 �I .59 15.1 ar - - MOUNTING HOLES FOR # 10 SCREWS (3 PLACES) tri ca CR353G - 120- and 150-ampere Contactors 10-: f---"1 I I I I I I I I lec .E 8.8 1 I I I i r--...J L.�� 7.75 t 196.8 ww w 2 15.9 4.36 1 17.5 lP L___ r· 4.44 1 12.7 tM ll.J 5.00 127.0 %" SCREWS (3 PLACES) MOUNTING HOLES FOR 38.1 4.50 114.3 Inches DuaI D.1mens1ons Millimeters .c om . Starter Dimensions c Esr·tma r·mg 0nIy ,-or CR354A - 25-, 30-, and 40-ampere Starters .,.. � �1 ua ls 3.44 ------1 MOUNTING HOLES FOR #10 SCREWS (3 PLACES) CR354F - 50-ampere Starters ca lP 3.75 95.3 ar tM an 7.13 181.1 , , -----l �1 9.7 .38 lec tri 3.62 6.50 165.1 ww w .E 7.13 181.1 t ----- 3.63 92.2 .., ___ .25 6.4 M OUNTING H OLES F OR #10 SCREWS (3 PLACES) 19 . .c om DuaI D.1mens1ons Two-speed Controller Dimensions Inches Est.1ma t.mg 0n1y ,-or c:: Millimeters CR355A - 25-, 30-, and 40-ampere (5-3-pole) .25 ua ls 64 3.75 3.25 82.6 tM an 95.3 3.50 MOUNTING HOLES FOR # 10 SCREWS ca lP ar 88.9 lec tri CR355A - 25-, 30-, and 40-ampere (2-3 and 3-3-pole) 3.75 .E 95.3 3.28 ww w 83.3 20 j MOUNTING HOLES FOR # 10 SCREWS DuaI D.1mens1ons Inches c E.sr·1ma r·mg OnIy ror Millimeters CR355E - 50-, 60-, 75-, and 90-ampere 8.38 212.9 an ua ls .60 15.2 .c om . Two-speed Controller Dimensions tM 5.00 127.0 MOUNTING HOLES FOR #10 SCREWS (3 PLACES) ww w .E lec tri ca lP ar 3.38 ----+---85.7 21 Inches Millimeters ror � Esr·1mar·mg OnIy For CR353A & F, 25-, Through 60-ampere Contactors; And CR354A & F, 25- Through 50-ampere Starters � ua ls 1.63 -:32 3.00 76.2 .13 1r 10.00 254.0 "B'' an 1 41.3 6.00 152.4 .c om . D uaI D.1mens1ons Enclosure Dimensions (TOP & (TOP & "A " BOTIOM) tM (BOTH S IDES) 1.00 25.4 ca lP "A" Combination Knock-outs For 3.4" or 1" Conduit "8" Combination Knock-outs For ¥2" or 3.4" Conduit ar RESET BUTION IN STARTER ENCLOS URE 3 POINT MTG FOR #10 SCR EWS For CR353E, 75- and 90-ampere Contactors 41.3 lec 3.69 93.7 tri 1.63 7.38 187.3 .E 13.25 336.6 ww w / 3 POINTMTG FOR 1!4' SCREWS ''A'' Combination Knock-outs For 1 " or 1 Y4" Conduit "8" Combination Knock-outs For ¥2" or 3/4" Conduit 22 -:32 .13 "B" (BOTH SIDES) " & "B" (TOP BOTIOM) A" BOTIOM) .E lec w ww ua ls PUSH BUTTONS GE's heavy-duty oiltight series of octagonal ring push buttons are designed for worldwide acceptability in an attractive, rugged design. They even provide watertight and dust-tight protection without the use of cumber some operator boots. With their single-screw contact block mounting arrangement you can cut installation time and costs. And their clear LEXAN covers make contact inspection easy, too. tM GE's 300-Line offers NEMA rated controls with a com plete line of full-voltage non reversing, reversing, two speed, and combination con tactors and motor starters. They're specification approv ed for the toughest industrial applications. an NEMA-RATED MOTOR CONTROLS tri GE's worldwide distributors also offer the logical choice for equipment users, too, with a full line of NEMA and IEC rated devices for replacement or updating existing equipment. No matter what control you're presently using you never need to worry about availability of the right control components. Your local GE distributor is fully stocked to efficiently handle all your replacement part needs. GE's internationally accepted 400-Une contactors give you control in 10 ratings from 5 to 50 horsepower in a modular economical design. The complete 400-Line in cludes contactors, overload relays and accessories for machine tool and other in dustrial applications. GE's full line of sensors includes mechanical limit switches, proximity switches, and photoelectric controls to meet a wide variety of in dustrial applications; in cluding metal working, automotive, and material handling. They're available in modular plug-in forms, com pact threaded-barrel forms, and can sense virtually any material with great speed and accuracy. ar and Europe can rely on a single source to meet their customer's control specifica tions. Both NEMA and IEC rated components are now available worldwide from one reliable supplier-GE. Now to help you fill orders fast you can get quick delivery on the exact control you need. You can also count on the complete local suport you need for special design and application assistance so you can better fill your customer's needs. SENSORS lEe-RATED MOTOR CONTROLS lP original equipment manufacturers in the U.S. Now, .c om Products For All Your ca Quality full ponents •nr,.. ...-..... through twe11V&-DOI& Qt)ru\'t: figu rations up to 600 latched, seii'-Cht�iit'IQ . atl
Source Exif Data:File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2011:09:07 11:29:39-04:00 Creator : FUJITSU fi-6670dj + sipc Modify Date : 2011:09:07 18:56:37-04:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2011:09:07 18:56:37-04:00 Creator Tool : FUJITSU fi-6670dj + sipc Format : application/pdf Document ID : uuid:da894274-c04e-48e1-9945-7521d08159df Instance ID : uuid:e36318e7-a863-4f74-9a9d-6f91ba7c8dbe Producer : Adobe Acrobat 10.0 Paper Capture Plug-in with ClearScan Page Count : 24EXIF Metadata provided by EXIF.tools