Warranty

2014-07-05

: Pdf 572265-Warranty 572265-Warranty 786034 Batch5 unilog

Open the PDF directly: View PDF PDF.
Page Count: 2

STONCO warrants to the Purchaser that each Product manufactured and sold by it will be free from defects in material
and workmanship in its intended use (normal wear and tear excepted) for the period of 1 year from date of Purchaser’s
purchase (the invoice date) from STONCO for standard product; 5 years for products featuring SSL Technology and 5
years for products featuring QL/Induction technology( refer to addendum S1a for detail) STONCO’s warranty flows only
to Purchaser. If any Product covered by this warranty is returned by Purchaser in accordance with STONCO’s Products
Return Policy, including without limitation its return authorization provisions, within the applicable warranty period set
forth above, and upon examination STONCO determines to its satisfaction that such Product was defective in material
or workmanship at the time of delivery to the Purchaser, STONCO will, at its option, repair or replace the Product or the
defective part thereof, or reimburse Purchaser for the purchase price.
If STONCO chooses to replace the Product and is not able to do so because it has been discontinued or is not available,
STONCO may replace it with a comparable product. The Products Return Policy is posted on STONCO’s Internet web
site at www.stoncolighting.com.
Where defects in materials, manufacturing or design cause the product/solution failure, they shall be repaired or
replaced (at STONCO’s discretion) according to the most practical resolution for the customer as defined by Philips
Customer Care Directives.
Transport related damage is also included in the policy and should be redeemable from our transport contracts.
Shipment related to resolving the warranty claim (products to the customer/site, samples back from customer/site to
Philips) is included in the agreed conditions.
Exclusions
This is a limited warranty, and excludes installation and consequential damages (such as loss of revenue/profits,
damage to property or other extended costs not previously mentioned), and is further defined by the limitations and
conditions below.
Philips shall not be liable for any loss of use of the equipment, inconvenience, or any other damages, whether direct,
indirect, incidental or consequential resulting from the use of this product, or arising out of any breach of this warranty.
The limited warranty and remedies set herein are exclusive and in lieu of all other warranties whether statutory, express
or implied including all warranties of merchantability and Fitness for particular purpose and wall warranties arising from
course of dealing or usage of trade. No person, agent, distributor, dealer or company is authorized to change, modify or
extend the terms of this limited warranty in any matter whatsoever.
Philips NLO’s will facilitate the technical resolution of problems, but does not warrant 3rd party products sold by Philips
associated with the installation, unless a full back-to-back support agreement is made with the supplier. Unless expressly
arranged through the RBU’s, 3rd party warranty coverage must be managed by the country offering the warranty, based
on a contractual arrangement with the supplier.
For purposes of clarity, “repair or replace the Product or the defective part thereof” does not include any reinstallation
costs or expenses, including without limitation labor costs or expenses.
Stonco is a Philips company 200 Franklin Square Drive, Somerset, NJ 08873 Phone: 800-334-2212 www.crescent-stonco.com
Commercial Lighting Warranty Policy
Page 1 of 2
This limited warranty does not cover the following:
1. Product failure caused by faulty power supplies, overheating caused by improper installation, omission of heat sink
parts or misapplication/omission of heat transfer compound.
2. Failure caused by fires, misuse, accidents, abuse, neglect, mishandling, misapplication, improper handling/
installation incurred by the user/installer or Acts of God (such as lightning or fluctuations in electrical power).
3. products which have been modified or have had the serial number altered, defaced or rendered illegible.
4. Product is left operating in conditions/requirements other than those mentioned in respective product brochures or
user manuals
5. The product has been serviced by personnel not authorized by Philips
Purchaser shall convey with each Product distributed to end users this MANUFACTURER’S LIMITED WARRANTY, and
if Manufacturer determines that the appropriate remedy for a defective product is refund of Purchaser’s purchase price,
Purchaser shall refund to the end user (or arrange for the refund to the end user of) the full purchase price paid by the
end user for such defective Product.
Limitations and conditions
Products/Solutions should be used within their specifications (e.g. Temperature, water ingress and other extreme
conditions, Indoor/outdoor, up-lighting/downlighting, etc.) and according to application guidelines. Warranty becomes
void if the product is mis-applied. Warranty will also be voided should the customer fail to appropriately maintain their
installation (eg. Changing lamps at end of life, replacement of components accordingly applications guidelines, etc.)
This warranty applies only to the repair or replacement of the product and only when the product is properly handled,
installed and maintained according to manufacturer’s instructions. Purchaser must notify us in writing within 30 days
of noticing the defect. We reserve the right to change the warranty period without prior notice and without incurring
obligation and expressly disclaims all warranties not stated in this limited warranty.
Philips cannot be held liable for electrical supply conditions, including supply spikes, over-voltage/under-voltage and
Ripple Current control systems that are beyond the specified limits of the products and those defined by relevant supply
standards (e.g. EN 50160 norms).
Locally sourced or modified products must be approved, along with the supplier, by the relevant RBU to be supported
by this policy. If the supplier and/or product is not approved by the relevant RBU then all warranty risks related to the
product must be carried by the sales organisation that sells the product.
This policy does not warrant consumables such as lamps, igniters, capacitors and other generally replaceable
consumable items. Such items may carry a separate warranty which may differ from this policy.
Stonco is a Philips company 200 Franklin Square Drive, Somerset, NJ 08873 Phone: 800-334-2212 www.crescent-stonco.com
Commercial Lighting Warranty Policy, Continued
Page 2 of 2
Magnetic ballasted HID: 1 year
Electronic ballasted HID: 3 years
Electronic ballasted linear
and compact fluorescent: 1 year
SmarT-Bay: 3 years
NyteWatch: 10 year
Incandescent product: 1 year
Mounting hardware: 1 year
Induction: 5 years
SSL: 5 years
Solar:
- SSL Luminaire: 5 years
- Solar Panels: 20 years
- Driver: 5 years
- Battery: 5 years pro-rated
Addendum S1a

Navigation menu