595143 Catalog
2014-07-05
: Pdf 595143-Catalog 595143-Catalog 601986 Batch5 unilog
Open the PDF directly: View PDF .
Page Count: 239
Download | |
Open PDF In Browser | View PDF |
ALPHABETIC INDEX ITEM PAGE 3 Outlet Power Adapter…………………….……...137 3-Way & 4-Way Vinyl Connectors………………...65 Adhesive Tape………...……………………………..80 Adjustable Cable Clamps…... ............................. .78 Adjustable Stripper………………………….....….168 Air Conditioner Cords……………………...…......137 Air Handling Cable Ties ...................................... .74 Alligator Test Clips……………………………....….87 Aluminum Compression Connectors….....14-16,21 Aluminum Ground Clamps …………………….31-32 Aluminum Mechanical Lugs…………………...24-27 Aluminum Splicers/Reducers…………………..7, 27 Aluminum Split Bolts .......................................... .29 Amalgamating Tape...……………………………….98 Anchor Kits ………………………………………..201 Anti-Oxidant…………………………………………..97 Anti-Short Bushings ........................................... .83 Appliance Cords……………………………………137 Auger Bits……………………………………………198 Aviation Tin Snips…..……………………………...173 Back Support…………..……………………………186 Banana Jack Plates………………………………...127 Barricade Tape….……………………………………98 Batteries………………….…………………………..181 Battery Clamps…………………….…………………87 Battery Tester……………………………………….150 Beam Clamps……………………………………….104 Bells……….………………………………………….144 Binding Post Plates………………………………..127 BNC Connectors………………………………131,133 Bolt Cutters………………………………………….174 Builders Chime Kits………………………………..144 Bullet Disconnects……………………………….62,69 Bullets - Lighting…………………………………...230 Bushings…………………………………………..81-83 Butt Connectors…….…………………………….45,64 Buzzers……………….………..…………………….144 Cable Clamps………………….……………………...78 Cable Clips…………………………….……………...88 Cable Connectors................................................ .84 Cable Cutters…………………………………..165-175 Cable Glands………………………….…………..86-87 Cable Marker Plates ............................................ .76 Cable Splicers Knife……………………………….179 Cable Supports……………………………………..110 Cable Tie Guns……………………………………..173 Cable Ties……………………………….…………70-76 Canopy Switches…………………………………..134 Capacitance Meter…………………………………157 Cat 5 Products………………………………...130-132 Cat 5 Strippers……………………………………...172 Cat 5 Testers…………………………………...146-147 Caulking Gun………………………………………..185 Caution Tape ....................................................... .98 Cell Phone Holder…………………………………..191 Channel Nuts………………………………………..104 Chime Kits……………………………………………144 Circuit Breaker Finder……………………………..151 Circuit Testers…………………………………146-160 Clamp Back Spacers ........................................... .84 Clamp Leaker Meter..……………………………...153 Clamp-On Lamps…………………………………..180 Clamp-On Meters………………………...153,157-160 Coax Crimpers………………………………...170-171 Coax Jack………………………………………127-129 Coax Strippers……………………………………...172 Compact Fluorescent Lamps…………………….233 Compression Connectors………………………14-22 Conduit Benders…………………………………...183 Copper Compression Connectors……………17-20 Copper Mechanical Lugs……………………….23,26 Copper Split Bolts……………………………….28-29 Cord Ends…………………………………………...132 Cord Switch………………………………………….138 Crimping Tools……………………..165-171,175-176 Dark Sky Wall Packs……...……………………….228 Detectable Tape……………………………………...98 Diagonal Cutting Pliers…………………………....165 Dimmers………………………………….……..123-124 Distance Meter…………………………….………..151 Door Release……………………………….……….145 Door Switch………………………………….……...145 Double Sided Adhesive Tape…………….………..80 Drill Bits………………………………………...197-200 Driller Dust Bowl…………………………….……..195 Drive Pins……………………………………….…...204 ITEM PAGE Dryer Receptacles………………………………….113 Dust Masks…………………………………………..187 Ear Muffs……………………………………………..186 Ear Plugs……………………………………………..186 Earth Resistance Clamp Meter…………………..153 Electric Door Release……………………………...145 Electrical Tape………………………………………..99 Electricians Scissors………………………………179 Emergency & Exit Lights…………………….211-219 Emergency Lighting Ballasts…………………….231 Emergency Switch Plates…………………...114,121 EMT Bushings ..................................................... .82 End Cutting Crimping Pliers……………………..166 Energy Savings Lamps……………………………233 Entrance Splicers…………………………………....21 Exit & Emergency Lights…………………….211-219 Extension Cords……………………………….…...137 ‘F’ Connector Crimper………………………..170-171 ‘F’ Connectors………………………………….…...133 Fan Speed Controls………………………………..124 Fasteners…………………………….104-110,201-204 Female Disconnects……………………...45,58-60,68 Fiberglass Receptacles…………………………...231 Firestop………………………………………………..96 First Aid Kits………………………………………...187 Fish Tapes…………………………………………...182 Flag Female Disconnects…………………………..66 Flange Spade Terminals………………………..56-57 Flashlights……………………………………...180-181 Flat Spade Bits……………………………….……..198 Flexible Jumper Straps……………………….…….30 Floodlights………………………………...224-227,230 Fluorescent Emergency Ballasts…………….….231 Fluorescent Lampholders………………………..136 Fluorescent Lamps………………………………...233 Friction Tape………………………………………....99 Fully Insulated Disconnects…….45,60-63,66,68-69 Fuse Tester………………………….……………….150 Garbage Disposal Switch…………………………111 Gas Emergency Plates……………………….114,121 Generator Power Cord Set……………………….138 GFCI Receptacles…………………….…………….114 GFCI Tester………………………………………….148 Gloves…………………………………….……..188-189 Grounding Connectors.……………….………...30-33 Green Grounding Screws…………………………202 Groove Joint Pliers………………………………...165 Ground Rod Clamps……………………………..30-33 Gutter Taps……………………………….…………...27 Hack Saw Blades………………………………177,195 Hacksaw……………………………………………...177 Hammers……………………………………………..166 Hard Hats…………………………………………….187 Hasps…………………………………………………..95 Heat Gun…………………………………..……102,185 Heat Shrink……………………………………..100-103 Heat Shrinkable Connectors…………………...67-69 Hex Keys……………………………………………..164 HID Lighting…………………………………….220-229 Hole Plugs……………………………………………..82 Hole Saws………………………………………193-195 Home Network Wiring System….…………..139-141 Hook - Mallable……………………………………..204 H-Tap Crimp Tool…………………………………..175 IDC Connectors………………………………………36 Impact Punch Down Tool………………………….169 Impact Screwdrivers…………………………...…..164 Indicator Pilot Lamps………………………………137 Infrared Sensors……………………………………125 Infrared Thermometer……………………………..152 Insert Bits……………………………………….200-201 Insulated 1000V Screwdrivers……………………163 Insulated Bushings............................................. .83 Insulated Connectors……………………………..7-12 Insulated Displacement Connectors……………..36 Insulated Piercing Connectors………………...12-13 Insulated Pliers 1000V……………………………..165 Insulated Terminal Crimper……….167-168,170-171 Insulation Tester……………………………………152 In-Use Weatherproof Covers……………………..210 Jersey Gloves……………………………………….189 Jumper Straps………………………………………..30 Keyless Receptacles……………………………….231 Keystone Jacks……………………………………..130 Knee Pads……………………………………………186 Knives…………………………………………...178-179 ITEM PAGE Knockout Plugs ................................................... .82 Lampholders………………………………………...136 Lan Cable Tester………………………………146-147 Laser Level…………………………………………..184 Latching Duct……………………………………..90-91 Lay-In Lugs……………………………………………31 LED Flashlights………………………………..180-181 LED Retrofit Kits……………………………………219 LED Worklight……………………………………….180 Levels…………………………………………………184 Light Meter…………………………………………...147 Lighting Arrestor……………………………………137 Linesman Pliers……………………………….165-166 Line Taps ............................................................. .25 Liquid Tight Connectors ..................................... .85 Lock Grip Pliers…………………………………….173 Locking Receptacles………………………………138 Locking Spade Terminals………………………54-55 Lockout Stations……………………………………..95 Logout Tags…………………………………………..94 Locks…………………………………………………...95 Long Nose Pliers……………………………………165 Lug Crimpers………………………………………..176 Male Disconnects…………………………45,58-60,68 Marker Books & Dispensers……………………92-93 Marker Cable Ties……………………………………72 Masonry Bits………………………………………...199 Mechanical Connectors…………………..7-12,23-27 Mechanical Lug Crimpers………………………...176 Metal Detector……………………………………….151 Metal Wall Plates…………………………114,119-122 Meters & Testers………………………………146-160 Meter Socket Lugs…………………………………...21 Modular Plug Crimper…………………………..…171 Momentary Switches……………………………....135 Motion Activated Lights…………………………...230 Motion Sensors…………………………..125-126,230 Motor & Phase Rotation Indicator……………….150 Mounting Cable Ties………………………………...73 Multimeter………………………………………154-156 Multiple-Stud Ring Terminals……………………...52 Multi-Technology Sensors………………………..126 Network Cable Testers……………………….146-147 Non-Metallic Cable Connectors ......................... .84 Nut Drivers……………………………………..161-162 Nylon Cable Glands……………………………...86-87 Occupancy Sensors…………………………..125-126 Oil Emergency Plates…………………………114,121 Outlet Strips……………………………………142-143 Padlocks……………………………………………….95 Par Lampholders……………………………...205,230 Parallel Connectors………………………………….65 Parallel Groove Clamps…………………………….29 Patch Panels………………………………………...130 Patchcords…………………………………………..131 Phone Jacks…………………………………...128-132 Phone Line Tester………………………………….149 Photocontrols……………………………………….232 Piggy Back Disconnects……………………………61 Pilot Lamps…………………………………………..137 Pin Terminal Connectors……..………………...23,57 Pipe Straps……………………………………………88 Plastic Insulated Bushings………………………...83 Plastic Trays…………………………………………201 Plastic Wall Plates……………………….114-118,132 Plenum Cable Ties…………………………………...74 Pliers…………………………………………….165-166 Plugs………………………………………………….138 Pocket Knives………………………………….178-179 Porcelain Receptacles……………………………..231 Porcelain Wire Holders ....................................... .80 Portable GFCI’S……………………………………..177 Portable Hand Lamps……………………………...180 Power Clamp Meter………………………………...160 Power Cord Sets……………………………………138 Power Loads………………………………………...204 Precision Screwdrivers……………………………163 Pre-Insulated Crimp Connectors………………….36 Pull Caps.............................................................. .82 Pull Chain Lampholders…………………………..136 Pull Chain Receptacles……………………………231 Pull Chain Switches………………………………..134 Punch Down Tool…………………………………..169 Push & Seal Connectors…………………………..133 Pushbuttons………………………………134,144-145 Push-In Wire Connectors…………………………...43 3 ALPHABETIC INDEX ITEM PAGE Push Tie Mounts ................................................. .76 PVC Cement ........................................................ 1-3 PVC Entrance Caps ............................................ .85 PVC Gloves………………………………………….188 PVC Heating Blankets……………………………..183 PVC Pipe Cutter………………………………….....172 PVC Pipe Straps……………………………………...88 PVC Sill Plates .................................................... .84 Quartz Floodlights…………………………….227,230 Quartz Lamps……………………………………….230 Quick Splice Connectors…………………………...36 Raceway……………………………………………90-91 Rags…………………………………………………..185 Range Receptacles…………………………………113 Ratcheting Wire Cutters…………………………..175 RCA Connectors…………………………………...133 RCA Plates…………………………………………..127 Receptacle Disconnects………………………...63,69 Receptacle & Switch Plates…………………113-122 Receptacle Tester…………………………………..148 Receptacles……………………………….112-114,138 Reciprocating Saw Blades………………………..196 Reed Switch……………………………...………….145 Reflective Vest………………………………………186 Releasable Cable Ties………………………………73 Ring & Spade Terminals...……………………...44-69 Ring Terminals…………………………….44,47-52,67 Rocker Switches……………………………………134 Roller Ball Contacts………………………………..145 Romex Connectors…………………………………..84 Romex Strippers……………………………………167 Roof Flashings .................................................... 4-5 Rotary Switches…………………………………….134 Rubber Tape…………………………………………..99 Saddle Tie Mounts…………………………………...77 Safety Glasses………………………………………192 Safety Signs…………………………………………..94 Saw Blades……………………………………..195-196 Saw Drill Bits………………………………………..200 Scissors………………………………………………179 Screwdrivers………………………………...…161-164 Screwdriver Guide………………………………….200 Screws…………………………………………..201-203 Security Bit Set……………………………………..201 Security Tie ......................................................... .74 Self Drilling Anchors……………………………….203 Self Fusing Tape……………………………………..98 Self Stick Cable Ties………………………………...75 ITEM PAGE Self-Adhesive Tie Mounts…………………………..77 Selfeed Bits………………………………………….199 Service Entrance Straps ..................................... .88 Sheetrock Saw……………………………………...177 Silicone Sealants…………………………………….96 Sill Plates ............................................................. .84 Slip Joint Pliers……………………………………..165 Snap Bushings……………………………………….81 Socket Bit Set……………………………………….162 Solenoid Voltage Tester…………………………..150 Spade Bits…………………………………………...198 Spade Terminals………………………….44,53-57,67 Speed Controls……………………………………..124 Spiral Lamps………………………………………...233 Spiral Wrap……………………………………………79 Splice Kits & Connectors…………………………103 Splicers/Reducers…………………………………7,27 Split Bolts………………………………………….28-29 Split Flexing Tubing…………………………………79 Splitters………………………………………………133 Spring Nuts………………………………………….104 Spring Steel Fittings………………………….108-110 Stainless Steel Cable Ties………………………….75 Stainless Steel Plates………………………...119-122 Staples ................................................................. .88 Step Drill Bits………………………………………..200 Straps................................................................... .88 Strippers………………………………………..167-172 Strut Clamps………………………………………...105 Strut Fittings…………………………………...104-107 Stud Bushings ..................................................... .83 Stud Finder…………………………………………..151 Surge Strips……………………………………142-143 Surge Suppressor………………………………….137 Switches……………………………...111,113,134-136 Switch & Receptacle Plates…………………113-122 Swivel Pendant……………………………………..204 Tamper Resistant Receptacles……………..112,114 Tape………………………………………………...98-99 Tape Measures……………………………………...184 Tee Taps……………………………………………….27 Tefzel Cable Ties……………………………………..74 Telephone Accessories………………………128-132 Terminal Blocks…………………………………..34-35 Terminal Kits………………………………………….46 Terminal Strips…………………………………...34-35 Test Clips……………………………………………...87 Tester & Meters………………………………..146-160 ITEM PAGE Thermometer………………………………………..152 Tie Mounts………………………………………...76-77 Timers………………………………………………...125 Tin Snips……………………………………………..173 Toggle Switches…………………….111,113,134-136 Tone Generator & Probe…………………………..147 Tool Bags……………………………………….190-191 Tool Boxes…………………………………………...185 Torpedo Level……………………………………….184 Transformers………………………………………..144 Trouble Lights……………………………………….180 Twist Locks………………………………………….138 UF Splice Kits…………………………………...…..103 Ultrasonic Sensors…………………………………126 Underground Tape…………………………………..98 Utility Knives…………………………………...178-179 UTP Stripper…………………………………………172 Vacancy Sensors…………………………………...125 Vandal Resistant Fixtures………………………...229 Voltage Detector………………………………146-160 Voltage Markers……………………………………...93 Wall Packs…………………………………220-223,228 Wall Plates………………………………...113-122,132 Wall Plug Mounts…………………………………….77 Wallboard Saw………………………………………177 Washers…………………………………………106,203 Water Pipe Clamps………………………………30-33 Weatherproof Boxes & Covers……………..205-210 Weatherproof Cable Connectors………………...133 Wire & Wing Connectors………………………..37-42 Wire Cutters……………………………………165-175 Wireless Chimes…………………………………...144 Wire Holders .........................................................80 Wire Markers & Dispensers…………………....92-93 Wire Pulling Lubricant……………………………...97 Wire Rope Clips…………………………………….203 Wiring Blocks………………………………..34-35,143 Wiring Duct…………………………………….80,90-91 Wood Detector……………………………………...151 Work Bags……………………………………...190-191 Wrenches…………………………………………….166 NUMERIC INDEX ITEM PG 01012-01168........... ..44 01182-01418........... ..45 10010-10078........... ..49 10110-10168........... ..53 10182-10186........... ..64 10208-10332........... ..58 10411-10418........... ..60 10710-10718........... ..46 10752-10776........... ..36 10816 ...................... ..46 11012-11074........... ..47 11076-11128........... ..48 11312-11374...……...50 11376-11428........... ..51 11452-11466........... ..52 11512-11548........... ..53 11612-11680........... ..54 11702-11740........... ..55 11742-11780........... ..56 11802-11836........... ..57 11902-11958........... ..59 11962-11986........... ..60 12012-12034........... ..61 12042-12064........... ..62 12072-12096........... ..63 12102-12148........... ..64 12152-12182........... ..65 12212-12268........... ..67 12272-12296 .......... ..68 12312-12336........... ..69 12412-12442........... ..66 13012-13016........... 195 13032-13042........... 200 13112-13194........... 196 13312-13422........... 193 13432-13470………194 13472-13500………195 13512-13592 .......... 197 13612-13656........... 199 13660-13862........... 198 13881-13899........... 199 13900-13920........... 200 13950 ...................... 201 13980-13988........... 200 17302 ...................... 203 17320-17364........... ..87 17400-17442 .......... 104 17450-17454........... 107 17462-17486........... 104 17514-17547........... 105 17612-17638........... 106 17652-17684........... 107 18012-18022........... 108 18024-18030........... 109 18048-18050 .......... 110 18052-18054........... 108 18056-18060........... 110 18092-18094........... 204 19490-19503........... ..88 20012-20098... ……..70 20212-20298........... ..71 20300-20302………..76 20312-20340…...…...73 20342………………...76 20346-20360........... ..77 20361-20367........... ..72 20372-20376........... ..74 20382-20388........... ..76 20412-20430........... ..73 20611-20638........... ..72 20902-20910........... ..74 20912-20976........... ..75 20960-20976........... ..75 20982-20986........... ..74 21210-21230........... ..93 21232-21278........... ..92 21312-21380........... ..93 ITEM PG 21412-21530 .......... ..94 21582-21696 .......... ..95 21700-21723 .......... ..82 21732-21760 .......... ..83 21762-21770 .......... ..84 21772-21828 .......... ..85 21892-21898 .......... ..80 22000-22008 .......... ..36 22010-22017 .......... ..79 22022-22032 .......... ..34 22052-22058 .......... ..35 22100-22106 .......... ..36 22110-22117 .......... ..79 22122-22132 .......... ..34 22152-22158 .......... ..35 22212-22220 .......... ..79 22311-22372 .......... ..81 22380-22400 .......... ..82 22412-22480 .......... ..78 22512-22520 .......... ..80 22532-22555 .......... ..86 22562-22588 .......... ..87 22612-22622 .......... ..80 22682-22692 .......... ..91 22712-22828 .......... ..90 22832-22968 .......... ..91 23012-23028 .......... ..43 23054-23056 .......... ..42 23071-23076 .......... ..39 23084-23086 .......... ..41 23154-23163 .......... ..42 23171-23178 .......... ..39 23184-23190 .......... ..41 23192 ...................... ..42 23222-23228 .......... ..43 23254-23256 .......... ..42 23271-23276 .......... ..39 23284-23290 .......... ..41 23292-23356 .......... ..42 23373-23376. ......... ..39 23384-23386 .......... ..41 23454-23456 .......... ..42 23473-23476 .......... ..39 23484-23486 .......... ..41 23512-23516 .......... ..37 23554-23556 .......... ..42 23573-23576 .......... ..39 23584-23586 .......... ..41 30012-30536………202 30612-30750………203 30772-30774………202 30832-30982.……...203 31020-31034………201 31111-31178.……...204 35000-35034………..88 36000-36140………206 36210-36420………207 36510-36550………209 36610-36850………210 37010-37184………208 37210-37264...…….209 37310-37334………208 37408-37936………205 38900-38910………210 39010-39060………232 40040-40122………132 40130-40133………143 45025-45116………133 45200-45235 .......... 136 50008-50015………176 50040-50060………174 50070-50086………175 50100……….………174 50110-50115 .......... 172 50130……………….168 50160……………….170 50230-50260 .......... 173 ITEM PG 51002-51007 ........... 176 51010-51014 ........... 172 51050-51054 ........... 154 51056……………….155 52012-52142 ........... 163 52172 ...................... 164 52190……………….163 52200-52212 ........... 184 52240-52276 ........... 182 52300-52334 ........... 183 52620-52632 ........... 181 53000-53024 ........... 192 53110-53150 ........... 189 53152-53184 ........... 188 53212-53232 ........... 186 53240-53262 ........... 187 53264-53420 ........... 185 53452-53456 ........... 201 53502-53524 ........... 190 53532-53558 ........... 191 54012-54042 ........... 165 54052-54072 ........... 166 54102-54154 ........... 161 54212-54222 ........... 162 54232 ...................... 163 54236-54342 ........... 164 54352-54363 ........... 173 54372-54374 ........... 179 54414-54424 ........... 168 54426-54432 ........... 167 54434-54438 ........... 169 54442-54448 ........... 170 54462-54499 ........... 171 54504-54518 ........... 172 54562-54566 ........... 169 54606……………….179 54610-54618 ........... 178 54622-54624 ........... 179 54626-54628 ........... 177 54650……………….180 54652-54666 ........... 181 54668 ...................... 180 54682 ...................... 184 54690……………….185 57010-57020 ........... 154 57030-57044 ........... 155 57050-57060 ........... 154 57070-57074 ........... 156 57080……………….152 57085 ...................... 157 57088 ...................... 150 57200-57254 ........... 158 57260-57266 ........... 159 57270-57272 ........... 160 57276-57278 ........... 153 57280-57286 ........... 157 57314 ...................... 147 57316-57318 ........... 146 57320 ...................... 147 57910……….………146 59002……….………150 59010-59030………148 59040-59050………149 59070-59090………148 59100……………….150 59110-59112 ........... 149 59114-59116 ........... 152 59120-59124 ........... 151 59150……….………147 59155……………….151 59180……….………149 60000-60222 ........... ..99 60230………………...98 67000-67006………103 67090………………...96 68004-68064………100 68112-68198 ........... 101 ITEM PG 68212-68240 .......... 102 69000-69040 .......... ..98 70010-70040 .......... 134 70050-70130 .......... 135 70140-70241 .......... 134 70250-70300 .......... 135 70301-70306 .......... 136 70310-70328 .......... 137 70330-70420 .......... 145 70422……………….134 70450-70452 .......... 138 70501 ..................... 145 71010-71018 .......... 220 71020-71027 .......... 221 71030-71036 .......... 222 71040-71052 .......... 223 71060-71066 .......... 224 71067-71069 .......... 225 71070-71076 .......... 226 71079-71090 .......... 227 71093-71096 .......... 229 71110-71118 .......... 228 72010 ..................... 220 72021-72022 .......... 221 72030-72032 .......... 222 72040-72042 .......... 223 72050-72052 .......... 224 72055-72057 .......... 225 72060-72066 .......... 226 72070-72074 .......... 227 72090-72092 .......... 229 72096-72098 .......... 228 72900-72904 .......... 231 73005-73028 .......... 214 73030-73046 .......... 215 73060-73069 .......... 211 73080-73096 .......... 219 73110-73122 .......... 211 73152-73158 .......... 212 73166-73180 .......... 213 73210-73232 .......... 230 73310-73337 .......... 216 73340-73385 .......... 217 73390-73397 .......... 218 78000-78212 .......... 144 78220-78256 .......... 145 79112-79192 .......... 233 80010-80023 .......... 128 80030-80055 .......... 129 80056-80183 .......... 128 80310-80431 .......... 127 80510-80536 .......... 125 80541-80556 .......... 126 80560-80576 .......... 125 80900-80923 .......... 114 81010-81133 .......... 115 81140-81313 .......... 116 81410-81673 .......... 117 81685-81688 .......... 116 81710-81843 .......... 118 81910-81963 .......... 112 81970-81993 .......... 113 82010-82013 .......... 111 82015-82018 .......... 112 82020-82103 .......... 111 82110-82118 .......... 231 82120-82123 .......... 112 82130-82136 .......... 113 82140-82153 .......... 112 82155-82156 .......... 113 82160-82173 .......... 112 82175-82176 .......... 111 82180-82221 .......... 113 82225-82238 .......... 112 82240-82246 .......... 113 82250-82263 .......... 112 82285-82291 .......... 111 ITEM PG 82330-82361 .......... 114 82521-82526 .......... 113 82610-82663 .......... 124 82710-82798 .......... 123 82810-82838 .......... 124 83010-83143 .......... 119 83210-83343 .......... 120 83410-83443 .......... 119 83445-83478 .......... 120 83480-83488 .......... 113 83490-83497 .......... 114 83505-83583 .......... 121 83610-83663 .......... 122 83670-83673 .......... 121 83710-83763 .......... 122 85010-86013 .......... 129 87010-87023 .......... 128 87100-87106 .......... 139 87112-87128 .......... 141 87152-87158 .......... 139 87160-87178 .......... 140 87510-87513 .......... 128 88000-88046 .......... 130 88052-88054 .......... 131 88102-88190 .......... 132 88212-88524 .......... 131 88612 ...................... 132 89000-89008 .......... 177 89010-89014 .......... 143 89022-89034 .......... 142 89040-89050 .......... 143 89060-89090 .......... 142 89112-89312 .......... 137 89342-89352 .......... 138 89412 ...................... 137 89512-89524 .......... 180 89612-89758 .......... 138 90314-90366 .......... ..28 90412-90426 .......... ..29 90454-90462 .......... ..25 90514-90556 .......... ..23 90560-90571 .......... ..26 90572-90580 .......... ..31 90591-90593 .......... ..26 90601-90606 .......... ..33 90612-90624 .......... ..27 90627-90633 .......... ..32 90634-90639 .......... ..30 90642-90666 .......... ..23 90668-90694 .......... ..21 90712-90847 .......... ..24 90852-90880 .......... ..25 90912-90926 .......... ..26 90941-90966 .......... ..25 91012-91122 .......... ..27 91310-91322 .......... ..26 91610-91640 .......... ..30 91652-91654 .......... ..31 91660-91666 .......... ..32 91670-91696 .......... ..33 93008-93088 .......... ..14 93110-93130 .......... ..15 93208-93238 .......... ..16 93902-93922 .......... ..21 94010-94098 .......... ..17 94214-94292 .......... ..18 94310-94398 .......... ..19 94410-94542 .......... ..20 96012-96032 .......... ..29 96102-96144…....12-13 97020-97124 .......... …7 97312-97442 .......... ..12 97513-97578 .......... …8 97613-97682 .......... …9 97712-97880…….10-11 99901-99986…….96-97 G11830-G90346..89,96 LIGHTING Combo LED Exit Emergency Light Combination Energy Saving LED Exit Sign and Emergency Lighting Unit In One Compact Design Completely Self-Contained Fully Automatic Operation Push to Test Switch Automatic, Low Voltage Disconnect (LVD) 120 or 277 VAC Operation Charge Rate/Power On LED Indicator Light 6-Volt 4.5AH Lead-Acid Maintenance-Free Battery Provides 90 minutes of Emergency Power Environmentally-Coated, Solid State Charger Injection-Molded, UL 94 V-O Flame Retardant, High Impact Thermoplastic Housing Standard with Two Fully Adjustable Glare-Free 5.4 Watt DC Long Life Lamp Heads Heads Rotate to Top or Side of Unit & 180o + for Maximum Flexibility in Field Universal J Box Mounting Canopy & 2 Face Plates for Side or Top Installation Models #73034 – 73037 have additional 12 Watt Remote Capability for up to 2 Additional Standard Remote Lighting Fixtures Base Unit (2 heads) - 4 hours operation 3 heads - 2 hours operation 4 heads - 1.5 hours operation Damp Location Rated UL 924 Cat No. Led Color Housing Width Depth Height Case Qty 73030 Red White 13.00” 2.50” 11.00” 4 73031 Red Black 13.00” 2.50” 11.00” 6 73032 Green White 13.00” 2.50” 11.00” 6 73033 Green Black 13.00” 2.50” 11.00” 6 Each Remote Capable Units Cat No. LED Color Housing Width Depth Height Case Qty 73034 Red White 13.00” 2.50” 11.00” 6 73035 Red Black 13.00” 2.50” 11.00” 6 73036 Green White 13.00” 2.50” 11.00” 6 73037 Green Black 13.00” 2.50” 11.00” 6 Each Salida Face Plates Cat No. Lettering Led Color Housing 73046 SALIDA Red White Each 213 LIGHTING Micro LED Emergency Light Cat No. 73118 NEW1 214 Color White Length 9” Depth 2.75” Fully adjustable, glare-free LED lamp heads LED Life Expectancy is more than 10 years Injection-molded, High Impact, UV-Stabilized UL 94 V-0 Thermoplastic - White Housing Snap-together construction speeds installation Universal J-box pattern mounting plate with quick connect features 120/277 V AC Test switch LED status indicator light Maintenance free, rechargeable NI-Cad battery 90 minutes of emergency power Damp location listed UL 924 Height Case Qty Each 4” 12 NEW! LIGHTING Micro Combo LED Exit Sign/Emergency Light LED Lamps Combination LED Energy Saving Exit Sign and LED Emergency Lighting Unit In One Compact Design Long Life Energy Saving LED Lamps Completely Self-Contained Fully Automatic Operation Push to Test Switch Automatic Low Voltage Disconnect (LVD) 120 or 277 VAC Operation Charge Rate/Power On LED Indicator Light Energy Consumption of Less than 4 Watts for Red letters and Less than 2 Watts for Green Letters Injection-Molded, UL 94 V-O Flame Retardant, High Impact, Thermoplastic Housing Fully Adjustable Glare-Free LED Lamps Heads Rotate for Maximum Field Flexibility Universal Mounting Canopy for Top or Back J-box Installation & 2 Snap-fit Face Plates Field replaceable chevron directional indicators Integral wiring channels to facilitate installation 6-Volt Sealed Ni-Cad Rechargeable Maintenance-Free Battery Environmentally-Coated, Solid State Charger Damp Location Rated UL 924 Listed Cat No. Width Depth Height Led Color Housing Case Qty 73040 11.60” 2.00” 73042 11.60” 2.00” 7.20” Red White 6 7.20” Green White 6 Each NEW2 215 GWG CEMENTS & ROOF FLASHINGS LIGHTING AURORA Self-Seal SOLAR Roof Flashings Designed to flash around solar mounting systems Slips easily over Conduit - self-sealing to conduit surface Self-sealing elastomeric tear-out collar Collar will not crack, chip, peel or separate from metal base Eliminates caulking - no sealing compound required Absolutely leak-proof & fits most roof sizes Accommodates all conduit types - ie: PVC, Aluminum, steel Cat No. G11830 G11831 G11833 Size 1/2” - 1” 1/2”, 3/4”, 1” 1/2”, 3/4”, 1” L 9” 18” 18” W 12.5” 18” 18” Mat’l Case Qty Wt/Case Each 1-17 Cases 18 Cases Galvanized 12 11 Galvanized 12 22.8 Aluminum 12 18.0 G12801 1/2” - 1-1/2” 9.5” 12.5” Galvanized 12 14.4 G12802 1/2” - 1-1/2” 9.5” 12.5” Aluminum 12 10.8 G12803 1-1/2” - 3” 9.5” 12.5” Galvanized 12 14.4 G12804 1-1/2” - 3” 9.5” 12.5” Aluminum 12 10.8 SIDEFLASH Thermoplastic Self-Seal Wall Flashings Designed to seal around piping penetrations through outside walls Slips easily over vent pipe - self-sealing to vent pipe surface Self-sealing elastomeric collar attached to a durable flexible hard plastic base Collar will not crack, chip, peel or separate from base Eliminates caulking - prevents moisture intrusion - no sealing compound required Absolutely leak-proof & fits most wall constructions Seals against air penetration - reduces energy costs Prevents bug or vermin intrusion Accommodates all vent types - ie: plastic, copper, steel or cast iron NEW3 216 Cat No. G12805 Size 1/2” - 2-1/2” L 8” W 8.5” G12806 3” - 6” 12” 12.5” Case Qty Wt/Case Each 1-17 Cases 18 Cases 12 8.4 12 8.4 GWG CEMENTS & ROOF FLASHINGS Regular Bodied 303 Series Clear Cements Regular-bodied clear cement for all grades & types of PVC pipe and fittings up to 4” diameter for Sch. 40 pipe & up to 2” for Sch. 80 with interference fit Recommended application temperature 40°F to 110°F, Sets up quickly Low-Voc Compliant, Meets ASTM-D2564 Cat. No. G30366S G30356S G30346S G30336S G30324 Size 1/4 Pt. 1/2 Pt. 1 Pt. 1 Qt. 1 Gal. Case Qty Wt/Case 24 9 24 16 24 27 12 26 6 52 Each 1-17 Cases 18 Cases Medium Bodied 404 Series Clear Cements Medium-bodied clear cement for PVC pipe and fittings up to 6” diameter for Sch. 40 and Sch. 80 Recommended application temperature 40°F to 110°F Low-Voc Compliant, Meets ASTM-D2564 Cat. No. G40466S G40456S G40446S G40436S G40424 Size 1/4 Pt. 1/2 Pt. 1 Pt. 1 Qt. 1 Gal. Case Qty Wt/Case 24 9 24 16 24 27 12 26 6 52 Each 1-17 Cases 18 Cases Medium Bodied 403 Series Gray Cements Medium-bodied gray cement for PVC pipe and fittings up to 6” diameter for Sch. 40 and Sch. 80 Recommended application temperature 40°F to 110°F Low-Voc Compliant, Meets ASTM-D2564 Cat. No. G40366S G40356S G40346S G40336S G40324 Size 1/4 Pt. 1/2 Pt. 1 Pt. 1 Qt. 1 Gal. Case Qty Wt/Case 24 9 24 16 24 27 12 26 6 52 Each 1-17 Cases 18 Cases Polar-Weld 2600 Series Fast Setting All Weather Clear Cements Medium-bodied clear cement for PVC pipe and fittings up to 6” diameter for Sch. 40 and Sch. 80 Formulated for fast initial set-up at temperatures down to –15°F to 110°F Low-Voc Compliant, Meets ASTM-D2564 Cat. No. G2666S G2656S G2646S G2636S G2624 Size 1/4 Pt. 1/2 Pt. 1 Pt. 1 Qt. 1 Gal. Case Qty Wt/Case 24 9 24 16 24 27 12 26 6 52 Each 1-17 Cases 18 Cases Plumb-Tite 2000 Series Wet Application Blue Cements Medium-bodied blue colored cement for PVC Fades to clear in sunlight pipe and fittings up to 6” dia. Sch. 40 and Recommended application temperature 40° Sch. 80 Very fast setting cement formulated for wet conditions and/or quick pressurization and fast installation Cat. No. G2066S G2056S G2046S G2036S G2024 Size 1/4 Pt. 1/2 Pt. 1 Pt. 1 Qt. 1 Gal. Case Qty Wt/Case 24 9 24 16 24 27 12 26 6 52 to 110°F Also for use on ENT Conduit Low-Voc Compliant, Meets ASTM-D2564 Each 1-17 Cases 18 Cases 1 GWG CEMENTS & ROOF FLASHINGS Heavy Bodied 204 Series Clear Cements Heavy-bodied very high strength clear Thick formula fills gaps in large diameter pipe industrial cement for high pressure, large and loose fitting joints diameter and critical applications Slow dry time in high temp. applications For PVC pipe and fittings up to 12” diameter Recommended application temperature 40°F Sch. 40 & Sch. 80 to 110°F Heavy-Duty bond Low-Voc Compliant Cat. No. G20436S G20424 Size 1 Qt. 1 Gal. Case Qty Wt/Case 12 26 6 52 Purple Primers 903 Series Purple-tinted aggressive primer for use on PVC pipe and fittings Can be used with all schedules and diameters of pipe Cat. No. G90366S G90356S G90346S G90336S G90324 Size 1/4Pt. 1/2 Pt. 1 Pt. 1 Qt. 1 Gal. Case Qty Wt/Case 24 9 24 14 24 25 12 24 6 45 Each 1-17 Cases 18 Cases Softens the pipe surface to allow a fast, secure solvent weld Low-Voc Compliant, Meets NSF standards where required or specified Each 1-17 Cases 18 Cases 1-17 Cases 18 Cases Clear Primers 9300 Series A clear aggressive primer for use on PVC pipe Can be used with all schedules and diameters of pipe Softens the pipe in preparation for solvent cement Does not apply a purple stain to the conduit Low-Voc Compliant, Meets ASTM F-656 Cat. No. G9366S G9356S G9346S G9336S Size 1/4Pt. 1/2 Pt. 1 Pt. 1 Qt. Case Qty Wt/Case 24 9 24 14 24 25 12 24 Each Purple Primer/Cleaners 8800 Series Purple-tinted all purpose primer/cleaner for Less aggressive than clear & purple primer PVC pipe and fittings Removes surface dirt, grease and grime and Can be used with all schedules and softens pipe in preparation for cement diameters of pipe Low-Voc Compliant Cat. No. G8856S G8846S G8836S G8824 Size 1/2 Pt. 1 Pt. 1 Qt. 1 Gal. Case Qty Wt/Case 24 14 24 25 12 24 6 45 Each 1-17 Cases 18 Cases Clear Cleaners 803 Series Clear cleaner for PVC pipe and fittings Can be used with all schedules and diameters of pipe Flows freely & evaporates quickly Cat. No. G80366S G80356S G80346S G80336S G80324 2 Size 1/4 Pt. 1/2 Pt.. 1 Pt. 1 Qt. 1 Gal. Case Qty Wt/Case 24 9 24 16 24 27 12 26 6 52 Fast acting cleaner removes surface dirt, grease and grime Low-Voc Compliant Each 1-17 Cases 18 Cases GWG CEMENTS & ROOF FLASHINGS Solvent Cement and Primer Accessories G31305-G30901 Standard replacement cans G31309-G31275 Standard replacement daubers, swab applicator & roller specifically sized for cans Cat. No. G31305 G31306 G31307 G30901 G31309 G31310 G31312 G31276 G31275 G31300 G31301 G31300-G31301 Adjustable plastic daubers fit can sizes 1/2” thru quart, designed to adjust to various can dimensions and allows application of the proper amount of cement to ensure a good solvent weld Size Case Qty Wt/Case Case Price 1/2 Pint Replacement Can 24 7 Pint Replacement Can 24 7 Quart Replacement Can 12 7 Gallon Wide Mouth Replacement Can 6 10 1/2 Pint Dauber 48 2 Pint Dauber 48 2 Quart Dauber 48 2 12” Gallon Can Swab Applicator 12 8 12” Gallon Can Roller Applicator 12 8 Adjustable Plastic Dauber w/ 1/2” Ball 48 4 Adjustable Plastic Dauber w/ 1” Ball 48 4 Access Panels Provides a service area for electrical, security systems, telephone, TV, computer cables, plumbing, and sprinkler system applications Reversible - can be flush mounted or surface mounted, no framing required Manufactured from high-impact ABS, White Textured surface UV Stabilized for outdoor use Can be painted, wallpapered or tiled to match any décor Patented clips on panel door & frame eliminates sagging or bowing of door in ceiling applications #34054, #34055 & #34045 have knockouts to accommodate wires, 1/4” waterlines, etc. Cat. No. G34054 G34055 G34045 G34056 G34044 Size Case Qty Wt/Case 4” x 6” 12 4 6” x 9” 6 5 8” x 8” 6 12 14” x 14” 6 12 14” x 29” 6 15 Each 1-17 Cases 18 Cases 3 GWG CEMENTS & ROOF FLASHINGS Galvanized Self-Seal Roof Flashings G11830 commonly used in Solar Applications Slips easily over vent pipe - self-sealing to vent pipe surface, 40 pitch Self-sealing elastomeric collar attached to a base of heavy gage aluminum Collar will not crack, chip, peel or separate from aluminum Eliminates caulking - no sealing compound required Absolutely leak-proof & fits most roof sizes Accommodates all vent types - ie: plastic, copper, steel or cast iron o Made of rust-proof, stamped 24 guage galvanized steel Cat No. Size G11830 1/2” - 1” G12201 1-1/4” - 1-1/2” G12202 2” G12203 3” G12204 4” G12209 Multisize Simply remove inner ring at the indicated point on collar L W Case Qty Wt/Case Each 1-17 Cases 18 Cases 9” 12.5” 12 11 12.5” 9” 12 12 12.5” 9” 12 12 14.5” 11” 12 17 15” 12” 12 23 G12209 1-1/2” - 2” - 3” 11” 14.5” 12 23 Rubber Flexible Flashings Rubber seizes the vent pipe with a locking grip preventing leakage entirely, 40o pitch One piece construction molded from military grade elastomer assures long life & all weather protection - will not crack, chip or peel; oil, ozone & sunlight (UV) resistant Highly adaptable product installs quickly & easily & adjusts to wide range of roof pitches, contours & surfaces Accommodates all vent types - ie: plastic, copper, steel or cast iron Cat No. G30101 G30102 G14025 G30103 G30104 Size 1-1/4” - 1-1/2” 2” 2-1/2” 3” 4” Case Qty 12 12 12 12 12 Wt/Case 6 7 8 9 13 Each 1-17 Cases 18 Cases Metal Roof Flashings Attaches to most decks, aluminum, copper, lead, plastic, fiberglass, etc. Applications include plumbing, heating & air conditioning pipes & vents, electrical service entrances, etc. Flexible, weather resistant E.P.D.M. resists ozone & UV light Pleated cone adjusts to any roof pitch & allows for complete flexibility Effectively isolates the pipe from the building movement created by expansion, contraction & vibration -300F - 2500F continuous service temperature range Compatible with pipes of steel, PVC, copper & sheet metal Cat No. G14741 G14743 Outside Diameter of Base Case Pipe to be Flashed Diameter Height Qty 1/4” - 2” 1/4” - 4” 4-3/4” 7-3/4” 3” 4” Wt/ Case 10 5 Each 1-17 18 Cases Cases 2 4 Retrofit Roof Flashings Designed for applications where continuous pipes or obstructions prevent the use of standard flashings Easily installed by wrapping around existing pipe & fastening down onto roof deck The pliable cone & stainless steel closure can easily be trimmed to the exact diameter of pipe to be flashed Unique stainless steel closure effectively resists corrosion & provides a positive weatherproof seal Corrosion-resistant aluminum base can be easily shaped to conform to most roof profiles Made of flexible, weatherproof E.P.D.M. rubber Insulates the pipe from building movement caused by expansion, contraction, & vibration -300F - 2500F continuous service temperature range Pipe diameter markings on the flexible cone in inches & millimeters 4 Cat No. Outside Diameter of Pipe to be Flashed Base Diameter Case Qty Wt/ Case G14751 G14752 1/4” - 4” 4” - 9-1/4” 8-3/16” 14-1/4” 10 5 3 6 Each 1-17 Cases 18 Cases GWG CEMENTS & ROOF FLASHINGS 2 Piece Electrical Service Mast Flashings Self-sealing collar slides over pipe and 0 requires no caulking for up to 40 pitch Collar unattaches from flashing base for Electrical Service Mast applications Cat. No. G11536 G11549 G11552 G11565 Size 1-1/4” 1-1/2” 2” 2-1/2” Ctn. Qty. 25 25 25 25 Wt/Ctn 27 32 28 30 Rated 180°F continuous heat Collar and base are separate to allow for easier installation 18”x18” Rustproof Galvanized Base Each 1-17 Cases 18 Cases Thermoplastic Base Self Seal Roof Flashings Self-sealing elastomeric collar attached to a sturdy thermoplastic base No caulking needed Absolutely leak proof Slips easily over pipe vent Cat. No. G14101 G14102 G14103 G14104 Self-sealing to vent pipe surface Self-adjusting to all roof pitches Base will not crack or warp Accommodates all vent pipe types - ie: plastic, copper, steel, cast iron, etc. Size Case Qty Wt/Case 1-1/4” - 1-1/2” 12 6 2” - 2-1/2” 12 6 3” 12 6 4” 12 9 Each 1-17 Cases 18 Cases Master Boot Universal Roof Flashings Provides a permanent seal that is unaffected by expansion/contraction, vibration, ice, material, ie: asphalt, plastic, tile, rubber, metal, etc. (not for hot mopped or built-up roofs) snow, hailstones, etc. Installs in about 10 minutes Self-sealing stepcone boot made of Excellent for wall penetrations - weathertight premium grade E.P.D.M., which gives it and airtight, inside or outside maximum resistance to weathering due to Easily customized with sharp knife/scissors ozone & UV light to accommodate a broad range of diameters Flexible aluminum alloy rim assures a Slides over vent pipe & conforms to any roof formed fit and corrosion resistance pitch excellent for ribbed metal roofs Can be used with any type of roofing Cat. No. G16250 G16251 G16252 G16253 Size Case Qty Wt/Case 1/8” - 3/4” 12 3 1/4” - 2” 6 2 1-1/4” - 3” 6 3 1/4” - 4” 6 4 Each 1-17 Cases 18 Cases Light Cutting Oil Formulated for hand thread cutting machines Protection helps make sharp clean threads while extending the life of your dies Cat. No. G30201 G30202 Size 1 Qt. 1 Gal. Case Qty 12 6 Wt/Case 26 50 Anti-mist and non-staining formula is not affected by weather Each 1-17 Cases 18 Cases Dark Cutting Oil Formulated for high-speed cutting machines Keeps machines running cooler and extends the life of your dies A special mixture of sulphonated and chlorinated oils provides high film strength Anti-mist and non-staining formula is not affected by weather Cat. No. G30204 G30205 Size 1 Qt. 1 Gal. Case Qty 12 6 Wt/Case 26 50 Each 1-17 Cases 18 Cases 5 GWG CEMENTS & ROOF FLASHINGS AURORA Self-Seal SOLAR Roof Flashings Designed to flash around solar mounting systems Slips easily over Conduit - self-sealing to conduit surface Self-sealing elastomeric tear-out collar Collar will not crack, chip, peel or separate from metal base Eliminates caulking - no sealing compound required Absolutely leak-proof & fits most roof sizes Accommodates all conduit types - ie: PVC, Aluminum, steel Cat No. G11830 G11831 G11833 Size 1/2” - 1” 1/2”, 3/4”, 1” 1/2”, 3/4”, 1” L 9” 18” 18” W 12.5” 18” 18” Mat’l Case Qty Wt/Case Each 1-17 Cases 18 Cases Galvanized 12 11 Galvanized 12 22.8 Aluminum 12 18.0 G12801 1/2” - 1-1/2” 9.5” 12.5” Galvanized 12 14.4 G12802 1/2” - 1-1/2” 9.5” 12.5” Aluminum 12 10.8 G12803 1-1/2” - 3” 9.5” 12.5” Galvanized 12 14.4 G12804 1-1/2” - 3” 9.5” 12.5” Aluminum 12 10.8 SIDEFLASH Thermoplastic Self-Seal Wall Flashings Designed to seal around piping penetrations through outside walls Slips easily over vent pipe - self-sealing to vent pipe surface Self-sealing elastomeric collar attached to a durable flexible hard plastic base Collar will not crack, chip, peel or separate from base Eliminates caulking - prevents moisture intrusion - no sealing compound required Absolutely leak-proof & fits most wall constructions Seals against air penetration - reduces energy costs Prevents bug or vermin intrusion Accommodates all vent types - ie: plastic, copper, steel or cast iron Cat No. G12805 G12806 6 Size 1/2” - 2-1/2” 3” - 6” L 8” 12” W 8.5” 12.5” Case Qty 12 12 Wt/Case 8.4 8.4 Each 1-17 Cases 18 Cases POWER CONNECTORS Black Insulated Connectors C US Dual-Rated CU9AL 90°C 600V Insulated with rugged high-dielectric rubber/vinyl coating Pre-filled with oxide inhibitor Easy re-entry for changes, inspection or troubleshooting Plugs marked with connector max wire size for easy identification 6061 aluminum dual rated for use with copper and/or aluminum wires UL/CSA certified through 600MCM size One wire per terminal 97028 has 4 Screws In-Line Splice Single Entry Splice Dual Entry Splice Dimension Measurements = Inches Cat No. Wire Range Allen Hex Length Width Height Box Qty 97020 2/0 -14 7/32 3.25 .87 1.52 6 97021 250 - 6 5/16 4.00 1.13 2.25 6 97022 350 - 6 5/16 4.63 1.25 2.75 4 97024 600 - 4 5/16 5.63 1.50 3.00 4 97028 750 - 250 1/2 7.30 1.69 3.43 1 Each Both wires enter same side Cat No. Wire Range Allen Hex Length Height Box Qty 97102 4 - 14 1/8 1.20 1.45 12 97106 2/0 - 14 7/32 1.69 1.50 6 Each Optional wire entry from either side Cat No. 97112 97116 Wire Range 4 -14 2/0 - 14 Allen Hex 1/8 7/32 Length 1.20 1.55 Height 1.45 1.50 Box Qty 12 6 97118 97120 250 - 6 5/16 2.13 2.10 6 350 - 6 5/16 2.47 2.50 4 97122 600 - 4 5/16 2.96 2.90 4 97124 750 - 250 5/16 3.50 3.60 2 Each 7 POWER CONNECTORS Black Insulated Multi-Cable Connector - Single Entry Insulated with rugged high-dielectric rubber/vinyl coating Pre-filled with oxide inhibitor Easy re-entry for changes, inspection or troubleshooting Plugs marked with connector max wire size for easy identification 6061 aluminum dual rated for use with copper and/or aluminum wires One wire per terminal UL/CSA certified through 600MCM size C US Dual-Rated CU9AL 90°C 600V Dimension Measurements = Inches 8 Cat No. 97513 97514 97516 97518 97533 97534 97535 97536 97537 Wire Ports 3 4 6 8 3 4 5 6 7 97538 97543 97544 97545 97546 97547 97548 97553 97554 97555 97556 97557 97558 97563 97564 97565 97566 97567 97568 97573 97574 97575 97576 97577 97578 8 3 4 5 6 7 8 3 4 5 6 7 8 3 4 5 6 7 8 3 4 5 6 7 8 Wire Range Allen Hex 4-14 1/8 2/0-14 7/32 250-6 5/16 350-6 5/16 600-4 5/16 750-250 5/16 Dimensions Length Height 1.54 1.97 1.45 2.82 3.65 2.34 3.01 3.69 1.50 4.36 4.74 Box Qty 12 6 4 4 6 6 4 4 3 5.41 3 2.99 3.85 4.71 5.57 6.43 7.29 3.52 4.57 5.62 6.67 7.72 8.77 4.89 5.63 7.11 8.47 9.83 11.18 4.90 6.19 7.75 9.18 10.60 12.03 4 4 3 3 2 2 4 3 3 2 2 2 3 2 2 2 2 2 3 1 1 1 1 1 2.10 2.50 2.90 3.60 Each POWER CONNECTORS Black Insulated Multi-Cable Connector - Dual Entry Insulated with rugged high-dielectric rubber/vinyl coating Pre-filled with oxide inhibitor Easy re-entry for changes, inspection or troubleshooting Plugs marked with connector max wire size for easy identification 6061 aluminum dual rated for use with copper and/or aluminum wires One wire per terminal UL/CSA certified through 600MCM size C US Dual-Rated CU9AL 90°C 600V Dimension Measurements = Inches Cat No. Wire Ports 97613 3 97614 4 97616 6 97618 Wire Range Allen Dimensions Hex Length Height Box Qty 1.54 12 Each Cat No. Wire Wire Ports Range Allen Dimensions Hex Length Height Box Qty 97657 7 7.72 2 6 97658 8 8.77 2 2.82 3 97659 9 9.82 8 3.65 3 97633 3 2.34 6 97634 4 3.01 6 97635 5 3.69 4 97636 6 4.36 4 97637 7 97638 8 97639 4-14 2/0-14 1/8 7/32 1.97 5.05 1.45 1.50 5.72 9 3 3 6.37 1 350-6 5/16 2.50 1 97660 10 10.87 1 97661 11 11.92 1 97662 12 12.97 1 97663 3 4.39 3 97664 4 5.63 2 97665 5 7.11 2 97666 6 8.47 2 97667 7 9.83 600-4 5/16 2.90 2 97640 10 7.03 1 97641 11 7.76 1 97668 8 11.18 2 8.40 1 97669 9 12.53 1 97642 12 97643 3 2.99 4 97670 10 13.88 1 97644 4 3.85 4 97671 11 15.23 1 97645 5 4.71 3 97672 12 16.58 1 97646 6 5.57 3 97673 3 4.90 3 97647 7 6.43 2 97674 4 6.19 1 97648 8 7.29 2 97649 9 8.15 1 97650 10 9.01 1 97651 11 9.87 1 97652 250-6 5/16 12 97653 3 97654 4 2.10 10.73 1 3.52 350-6 5/16 4.57 4 2.50 3 97675 5 7.75 1 97676 6 9.18 1 97677 7 97678 8 12.03 1 97679 9 13.46 1 750-250 5/16 10.60 3.60 1 97680 10 14.88 1 11 16.30 1 12 17.73 1 97655 5 5.62 3 97681 97656 6 6.67 2 97682 Each 9 POWER CONNECTORS Insulated Mountable - Single Entry Isolated bolt holes for mounting to trough, panel or wireway Insulated with rugged high-dielectric rubber/vinyl coating Pre-filled with oxide inhibitor Plugs marked with connector max wire size for easy identification 6061 aluminum dual rated for use with copper and/or aluminum wires One wire per terminal CSA Certified through 600MCM size C US Dual-Rated CU9AL 90°C 600V Dimension Measurements = Inches Cat. No. 97712 97714 97716 97732 97733 97734 97735 97736 97742 97743 97744 97745 97746 97752 97753 97754 97755 97756 97762 97763 97764 97765 97766 97772 97773 97774 97775 97776 10 Wire Ports 2 4 6 2 3 4 5 6 2 3 4 5 6 2 3 4 5 6 2 3 4 5 6 2 3 4 5 6 Wire Range Allen Hex Bolt 4-14 1/8 #10 2/0-14 7/32 #12 250-6 5/16 1/4 350-6 5/16 5/16 600-4 5/16 5/16 750-250 3/8 3/8 Dimensions Length Height 1.97 2.82 1.45 3.65 3.01 3.69 4.36 1.50 4.74 5.41 3.85 4.71 5.57 6.43 7.29 4.57 5.62 6.67 7.72 8.77 5.63 7.11 8.47 9.83 11.18 6.19 7.75 9.18 10.60 12.03 2.10 2.50 2.90 3.60 Each POWER CONNECTORS Insulated Mountable - Dual Entry Isolated bolt holes for mounting to trough, panel or wireway Insulated with rugged high-dielectric rubber/vinyl coating Pre-filled with oxide inhibitor Plugs marked with connector max wire size for easy identification 6061 aluminum dual rated for use with copper and/or aluminum wires One wire per terminal CSA Certified through 600MCM size Dual-Rated CU9AL 90°C 600V C US Dimension Measurements = Inches Cat No. Wire Ports Wire Range Allen Hex 97812 97814 2 4 4-14 1/8 97816 6 3.65 97832 2 3.01 97833 3 3.69 97834 4 4.36 97835 5 97836 6 97837 7 97838 8 7.03 97839 9 7.76 97840 10 8.40 97842 2 3.85 97843 3 4.71 97844 4 97845 5 97846 6 97847 7 8.15 97848 8 9.01 97849 9 9.87 97850 10 10.73 97852 2 4.57 97853 3 5.62 97854 4 6.67 97855 5 97856 6 97857 7 9.82 97858 8 10.87 97859 9 11.92 97860 10 12.97 2/0-14 250-6 7/32 5/16 Dimensions Bolt Length Height Each #10 #12 1/4 1.97 2.82 1.45 Cat No. Wire Ports Wire Allen Range Hex Dimensions Bolt Length Height Each 97862 2 5.63 97863 3 7.11 97864 4 8.47 97865 5 9.83 600-4 5/16 5/16 97866 6 5.05 97867 7 12.53 5.72 97868 8 13.88 97869 9 15.23 97870 10 16.58 97872 2 6.19 97873 3 7.75 97874 4 9.18 5.57 97875 5 10.60 6.43 97876 6 97877 7 13.46 97878 8 14.88 97879 9 16.30 97880 10 17.73 6.37 7.29 1.50 2.10 750-250 3/8 3/8 11.18 12.03 2.90 3.60 7.72 350-6 5/16 5/16 8.77 2.50 11 POWER CONNECTORS Clear Insulated Multi-Cable Connector Blocks Wire Entry From Either Side Insulated aluminum body eliminates the need for time consuming manual taping, removable plugs provide easy access for installation. Reduce installation time. An easy to install, worry-free solution for insulating splices, taps, & terminations in meter centers & other multiple connection applications; one wire per terminal Multi-tap feature reduces the space needed for multiple installations PVC insulation reduces the likelihood & cost of power outages caused by improper or inconsistent insulated connections done manually in the field Clear insulation allows visual confirmation that conductor is properly inserted Single piece molded insulation is chemical and abrasion resistant and operates in temperature range of –49oF to 194oF (–45o to 90oC) 6061 aluminum dual rated for use with copper and/or aluminum wires Multi-Cable Connector Dimension Measurements = Inches Cat No. 97312 97314 97316 97318 97320 97322 97352 97354 97356 97358 97360 97362 97392 97394 97396 97398 97400 97402 97412 97414 97416 97418 97420 97422 97432 97434 97436 97438 97440 97442 No. of Ports 2 3 4 5 6 8 2 3 4 5 6 8 2 3 4 5 6 8 2 3 4 5 6 8 2 3 4 5 6 8 Pre-filled with oxide inhibitor compound ANSI C119.4 & UL 486b listed, Rated 600 volts Wire Range 4 - 14 4 - 14 4 - 14 4 - 14 4 - 14 4 - 14 2/0 - 14 2/0 - 14 2/0 - 14 2/0 - 14 2/0 - 14 2/0 - 14 250MCM - 6 250MCM - 6 250MCM - 6 250MCM - 6 250MCM - 6 250MCM - 6 350MCM - 10 350MCM - 10 350MCM - 10 350MCM - 10 350MCM - 10 350MCM - 10 500MCM - 6 500MCM - 6 500MCM - 6 500MCM - 6 500MCM - 6 500MCM - 6 Length 1.13 1.56 2.06 2.56 3.06 4.06 1.63 2.38 3.13 3.88 4.63 6.13 2.13 3.13 4.13 5.00 6.00 8.00 2.25 3.25 4.25 5.25 6.25 8.25 2.88 4.13 5.38 6.63 7.88 10.38 Width 1.63 1.63 1.63 1.63 1.63 1.63 1.75 1.75 1.75 1.75 1.75 1.75 2.63 2.63 2.63 2.63 2.63 2.63 3.13 3.13 3.13 3.13 3.13 3.13 3.38 3.38 3.38 3.38 3.38 3.38 Height 1.31 1.31 1.31 1.31 1.31 1.31 1.38 1.38 1.38 1.38 1.38 1.38 2.13 2.13 2.13 2.13 2.13 2.13 2.50 2.50 2.50 2.50 2.50 2.50 2.75 2.75 2.75 2.75 2.75 2.75 Box Qty 12 12 6 6 6 4 6 6 6 4 4 3 6 6 6 4 4 3 3 3 3 3 2 2 3 3 3 2 2 2 Each Underground Insulation Piercing Connectors Installation: Simple, Fast & Reliable Before Torquing After Torquing 1. Loosen the shear-head bolt until the ribs are visible & so that the cable is not obstructed on entry 2. Apply a little grease from the connector to the end of the conductor & insert the conductor into the cable entry port making sure it is fully seated in the back of the connector 3. Tighten the bolt with a closed-end wrench or socket until the top shear-head breaks off 4. Check that conductors are secure by pulling them Fully submersible, completely waterproof connector Completely rubber overmolded body ensures no need for the installer to come into contact with bare metal conductor or the conductive material of the connector Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2” 6 point socket 12 Cat No. 96142 96144 Torque in Inch lb. 185 185 Bolt Head Size 1/2 1/2 Number of Ports 2 6 Cable Range 12 - 350mcm (2) @ 2-350 & (4) @ 6-4/0 Dimensions in Inches H W L 2.1 1.4 7.0 2.5 4.0 8.4 Each POWER CONNECTORS Above Ground Insulation Piercing Connectors Installs In Just Minutes Saving Many Man-Hours On The Job Eliminates Wire Stripping, Connecting & Taping of Split Bolts and Adding Inhibitor Can be installed on Energized Circuits eliminating Power Shutdowns Red ‘Turbo Spacer’ Blue Rubber Insert Allows for main wire to be inserted & hand tightened, leaving the tap location completely open Recreates insulation when used on bare wire. Used to avoid any damage on neutral messenger. All models except 96102 & 96104 Red ‘Turbo’ Spacer Remove blue insert if main wire is insulated Leave blue insert if main wire is bare Only on Models 96106, 96110, 96112, 96114 1 - Determine direction for tap 2 - Insert tap conductor, conductor to enter connector. Remove making sure conductor is fully and discard extra end cap. seated in end cap. 3 - Place connector on main conductor & tighten the bolt with a closed-end wrench or socket until top shear-head breaks off. Overhead services - both insulated & bare mains, above grade URD services, street lighting, non-tension splicing & tapping, insulated replacement for split bolts, tapping without cutting the main, gutter taps. Double shear-head bolt guarantees correct torque tightening every time, ensuring a quality connection, & eliminating the possibility of hot spots, damaged wires or loose connections No cable stripping required, simply insert the jacketed cable into the entry port & tighten with a 1/2” 6 point socket Turbo spacer allows tap side to remain open while you hand tighten the connector on the main wire (note models) The bolt and all external parts of the connector are completely isolated from energized parts and the bolt is covered by the plastic shear-head. The installer has no contact at any point with an energized part. Can be installed on energized conductors, however, the tap must not be under load. Corrosion-free connection is good for hot, cold, damp, & salty connections. Properly installed the connector seals water-tight. This is accomplished by a sealant tank, that during installation is compressed and forces sealant out to protect the connection from oxygen and water. Copper teeth are tin plated, shell is high strength UV resistant thermoplastic insulating material, steel bolts are galvanized. The connector bodies are made from high-strength fiber-reinforced thermoplastic and galvanized steel bolts UL486B Listed for cu to cu, al to al, & cu to al; 600 Volt, 194oF (90oC) Rated, Meets ANSI C119.4 requirements Cat No. Number Of Bolts Torque in inch lbs. Bolt Head Size Conductor Range Main AWG Tap AWG Dimensions in Inches H W L Box Qty 96102 96104 96106 96108 96110 96112 96114 96116 1 1 1 1 1 1 1 2 80 80 80 125 125 160 160 330 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 2/0 - 4 750 - 3/0 1/0 - 8 4/0 - 3 1/0 - 8 4/0 - 2 4/0 - 2 350 - 1/0 10 - 14 10 - 14 2 - 10 2 - 10 1/0 - 8 2/0 - 6 4/0 - 4 350 - 1/0 3.6 4.3 3.7 3.9 3.7 4.3 4.3 5.4 1.7 2.4 2.0 1.7 2.0 2.4 2.4 3.1 2.7 2.8 3.0 2.7 3.0 3.2 3.2 5.0 12 12 12 12 12 12 12 4 96118 96120 96122 2 2 2 330 330 330 5/8 5/8 5/8 500 - 2/0 500 - 4/0 750 - 250 4/0 - 4 350 - 1/0 500 - 250 5.4 5.4 5.6 3.1 3.0 3.6 5.0 5.0 5.7 4 4 4 Each 13 POWER CONNECTORS Aluminum 1 Hole Compression Lugs Lugs accept both aluminum and copper conductors Connector bores are coated with oxide inhibitor & capped Made of high-conductivity seamless aluminum Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity Color Coded for easy identification Marked with die index Crimp marks indicate proper crimp locations UL486B Listed AL9CU Listed for 35 KV when properly installed Dimension Measurements = Inches & (Millimeters) Cat No. Wire Range 93008 93010 93012 93014 93016 93018 93020 93022 93024 93026 93028 93030 93032 93034 93036 93038 93039 93040 93042 93044 93046 93048 93050 93052 93054 93056 93058 93060 93062 93064 93066 93067 93068 93070 93072 93074 93076 93078 93080 93082 93084 93086 93088 8 Str. 6 Str. 6 Str. 6 Str. 4 Str. 4 Str. 4 Str. 2 Str. 2 Str. 2 Str. 1 Str. 1 Str. 1 Str. 1/0 Str. 1/0 Str. 1/0 Str. 1/0 Str. 2/0 Str. 2/0 Str. 2/0 Str. 2/0 Str. 3/0 Str. 3/0 Str. 3/0 Str. 3/0 Str. 4/0 Str. 4/0 Str. 4/0 Str. 4/0 Str. 250MCM 250MCM 300MCM 300MCM 300MCM 350MCM 350MCM 400MCM 400MCM 500MCM 500MCM 500MCM 600MCM 750MCM 14 Stud Color Box Inside Outside Size Code Qty Diameter Diameter 1/4 1/4 5/16 3/8 1/4 5/16 3/8 1/4 5/16 3/8 1/4 5/16 3/8 1/4 5/16 3/8 1/2 1/4 5/16 3/8 1/2 1/4 5/16 3/8 1/2 1/4 5/16 3/8 1/2 3/8 1/2 5/16 3/8 1/2 3/8 1/2 3/8 1/2 3/8 1/2 5/8 5/8 5/8 Blue Gray Gray Gray Green Green Green Pink Pink Pink Gold Gold Gold Tan Tan Tan Tan Olive Olive Olive Olive Ruby Ruby Ruby Ruby White White White White Red Red Blue Blue Blue Brown Brown Green Green Pink Pink Pink Black Yellow 20 50 50 50 30 30 30 30 30 30 15 15 15 20 20 20 20 20 20 20 20 15 15 15 15 10 10 10 10 9 9 9 9 9 6 6 6 6 6 6 6 4 4 .18(4.6) .31(7.9) .20(5.1) .34(8.6) .20(5.1) .34(8.6) .20(5.1) .34(8.6) .25(6.4) .44(11.2) .25(6.4) .44(11.2) .25(6.4) .44(11.2) .31(7.9) .53(13.5) .31(7.9) .53(13.5) .31(7.9) .53(13.5) .35(8.9) .53(13.5) .35(8.9) .53(13.5) .35(8.9) .53(13.5) .39(9.9) .63(16.0) .39(9.9) .63(16.0) .39(9.9) .63(16.0) .39(9.9) .63(16.0) .44(11.2) .69(17.5) .44(11.2) .69(17.5) .44(11.2) .69(17.5) .44(11.2) .69(17.5) .48(12.2) .76(19.3) .48(12.2) .76(19.3) .48(12.2) .76(19.3) .48(12.2) .76(19.3) .55(14.0) .84(21.3) .55(14.0) .84(21.3) .55(14.0) .84(21.3) .55(14.0) .84(21.3) .59(15.0) .92(23.4) .59(15.0) .92(23.4) .65(16.5) 1.01(25.7) .65(16.5) 1.01(25.7) .65(16.5) 1.01(25.7) .72(18.3) 1.12(28.4) .72(18.3) 1.12(28.4) .76(19.3) 1.19(30.2) .76(19.3) 1.19(30.2) .84(21.3) 1.32(33.5) .84(21.3) 1.32(33.5) .84(21.3) 1.32(33.5) .92(23.4) 1.44(36.6) 1.03(26.2) 1.60(40.6) A A1 B C D E F 1.81(45.9) 2.01(51.0) 2.01(51.0) 2.05(52.0) 2.31(58.6) 2.31(58.6) 2.39(60.7) 2.50(63.5) 2.50(63.5) 2.50(63.5) 2.50(63.5) 2.50(63.5) 2.50(63.5) 2.81(71.3) 2.81(71.3) 2.81(71.3) 2.81(71.3) 2.81(71.3) 2.81(71.3) 2.81(71.3) 2.81(71.3) 3.00(76.2) 3.00(76.2) 3.00(76.2) 3.00(76.2) 3.43(87.1) 3.43(87.1) 3.43(87.1) 3.43(87.1) 3.50(88.9) 3.50(88.9) 4.00(101.6) 4.00(101.6) 4.00(101.6) 4.25(107.9) 4.25(107.9) 4.6(118.8) 4.6(118.8) 4.75(120.6) 4.75(120.6) 4.75(120.6) 5.12(130.0) 6.12(155.4) .56(14.2) .86(21.8) .86(21.8) .86(21.8) 1.1(27.9) 1.1(27.9) 1.1(27.9) 1.2(30.5) 1.2(30.5) 1.2(30.5) 1.2(30.5) 1.2(30.5) 1.2(30.5) 1.2(30.5) 1.2(30.5) 1.2(30.5) 1.2(30.5) 1.3(33.0) 1.3(33.0) 1.3(33.0) 1.3(33.0) 1.4(35.6) 1.4(35.6) 1.4(35.6) 1.4(35.6) 1.4(35.6) 1.4(35.6) 1.4(35.6) 1.4(35.6) 1.5(38.1) 1.5(38.1) 1.6(40.6) 1.6(40.6) 1.6(40.6) 1.9(48.3) 1.9(48.3) 2.3(58.4) 2.3(58.4) 2.5(63.5) 2.5(63.5) 2.5(63.5) 2.6(66.0) 3.2(81.3) .63(16.0) .57 (14.4) .57 (14.4) .65 (16.5) .57 (14.4) .57 (14.4) .65 (16.5) .71 (18.0) .71 (18.0) .71 (18.0) .73 (18.5) .73 (18.5) .73 (18.5) .85 (21.5) .85 (21.5) .85 (21.5) .85 (21.5) .94 (23.8) .94 (23.8) .94 (23.8) .94 (23.8) 1.03 (26.1) 1.03 (26.1) 1.03 (26.1) 1.03 (26.1) 1.15 (29.2) 1.15 (29.2) 1.15 (29.2) 1.15 (29.2) 1.26 (32.0) 1.26 (32.0) 1.37 (34.8) 1.37 (34.8) 1.37 (34.8) 1.52 (38.6) 1.52 (38.6) 1.61 (40.8) 1.61 (40.8) 1.79 (45.4) 1.79 (45.4) 1.79 (45.4) 1.96 (49.7) 2.19 (55.6) .09(2.2) .10(2.5) .10(2.5) .08(2.0) .19(4.8) .19(4.8) .15(3.8) .22(5.5) .22(5.5) .22(5.5) .18(4.5) .18(4.5) .18(4.5) .24(6.1) .24(6.1) .24(6.1) .24(6.1) .24(6.1) .24(6.1) .24(6.1) .24(6.1) .28(7.1) .28(7.1) .28(7.1) .28(7.1) .29(7.3) .29(7.3) .29(7.3) .29(7.3) .32(8.1) .32(8.1) .35(8.8) .35(8.8) .35(8.8) .39 (9.9) .39(9.9) .42(10.6) .42(10.6) .47(11.9) .47 (11.9) .47 (11.9) .51(12.9) .55(13.9) .28(7.1) .25( 6.3) .33( 8.3) .41(10.4) .25( 6.3) .33( 8.3) .41(10.4) .25( 6.3) .33( 8.3) .41(10.4) .25 (6.3) .33( 8.3) .41(10.4) .25(6.3) .33(8.3) .41(10.4) .51(12.9) .25 (6.3) .33(8.3) .41(10.4) .51(12.9) .25 (6.3) .33(8.3) .41(10.4) .51(12.9) .25(6.3) .33(8.3) .41(10.4) .51(12.9) .41(10.4) .51(12.9) .33(8.3) .41(10.4) .51(12.9) .41(10.4) .51(12.9) .41(10.4) .51(12.9) .41(10.4) .51(12.9) .67(17.0) .67(17.0) .67(17.0) .31 (7.8) .38 (9.6) .38 (9.6) .38 (9.6) .38 (9.6) .38 (9.6) .38 (9.6) .38 (9.6) .38 (9.6) .38 (9.6) .38 (9.6) .38 (9.6) .38 (9.6) .50 (12.7) .50 (12.7) .50 (12.7) .50 (12.7) .50 (12.7) .50 (12.7) .50 (12.7) .50 (12.7) .50 (12.7) .50 (12.7) .50 (12.7) .50 (12.7) .56 (14.2) .56 (14.2) .56 (14.2) .56 (14.2) .63 (16.0) .63 (16.0) .63 (16.0) .63 (16.0) .63 (16.0) .69 (17.5) .69 (17.5) .69 (17.5) .69 (17.5) .75 (19.0) .75 (19.0) .75 (19.0) .75 (19.0) .94 (23.8) .81(20.5) .88(22.3) .88(22.3) .88(22.3) .88(22.3) .88(22.3) .88(22.3) .88(22.3) .88(22.3) .88(22.3) .88(22.3) .88(22.3) .88(22.3) .93(23.6) .93(23.6) .93(23.6) .93(23.6) 1.12 (28.4) 1.12 (28.4) 1.12 (28.4) 1.12 (28.4) 1.12 (28.4) 1.12 (28.4) 1.12 (28.4) 1.12 (28.4) 1.31 (33.2) 1.31 (33.2) 1.31 (33.2) 1.31 (33.2) 1.31 (33.2) 1.31 (33.2) 1.50 (38.1) 1.50 (38.1) 1.50 (38.1) 1.50 (38.1) 1.50 (38.1) 1.50 (38.1) 1.50 (38.1) 1.50 (38.1) 1.50 (38.1) 1.50 (38.1) 1.87 (47.5) 2.00 (50.8) Each POWER CONNECTORS AluminumLong Barrel 2 Hole Compression Lugs Lugs accept both aluminum and copper conductors Connector bores are coated with oxide inhibitor & capped Made of high-conductivity seamless aluminum Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity Color Coded for easy identification Marked with die index Crimp marks indicate proper crimp locations UL486B Listed AL9CU Listed for 35 KV when properly installed Dimension Measurements = Inches & (Millimeters) Cat No. Wire Stud Color Box Inside Range Size Code Qty Diameter Tan 10 .39(9.91) Outside Diameter A A1 B C D E F G 93110 1/0 Str. 3/8 93111 1/0 Str. 93112 2/0 Str. 1/2 Tan 20 .39(9.91) .63(16.00) 4.75(120.6) 1.2(30.5) .85(21.5) .24(6.1) .51(12.9) .63(16.0) 3.12(79.2) 1.75(44.4) 1/2 Olive 20 .44(11.18) .69(17.53) 4.80(121.9) 1.3(33.0) .94(23.8) .24(6.1) .51(12.9) .63(16.0) 3.12(79.2) 1.75(44.4) 93114 3/0 Str. 1/2 Ruby 20 .48(12.19) .76(19.30) 5.00(127.0) 1.4(35.6) 1.03(26.1) .28(7.1) .51(12.9) .63(16.0) 3.12(79.2) 1.75(44.4) 93116 4/0 Str. 1/2 White 12 .55(13.97) .84(21.34) 5.25(133.3) 1.4(35.6) 1.15(29.2) .29(7.3) .51(12.9) .63(16.0) 3.12(79.2) 1.75(44.4) Each .63(16.00) 3.50(88.9) 1.2(30.5) .85(21.5) .24(6.1) .41(10.4) .38(9.6) 1.87(47.5) 1.00(25.4) 93118 250 MCM 1/2 Red 12 .59(14.99) .92(23.37) 5.31(134.8) 1.5(38.1) 1.26(32.0) .32(8.1) .51(12.9) .63(16.0) 3.12(79.2) 1.75(44.4) 93120 300 MCM 1/2 Blue 9 .65(16.51) 1.01(25.65) 5.50(139.7) 1.6(40.6) 1.37(34.8) .35(8.8) .51(12.9) .63(16.0) 3.12(79.2) 1.75(44.4) 93122 350 MCM 1/2 Brown 6 .72(18.29) 1.12(28.45) 5.87(149.1) 1.9(48.3) 1.52(38.6) .39(9.9) .51(12.9) .63(16.0) 3.12(79.2) 1.75(44.4) 93124 400 MCM 1/2 Green 6 .76(19.30) 1.19(30.23) 6.43(163.3) 2.3(58.4) 1.61(40.8) .42(10.6) .51(12.9) .63(16.0) 3.12(79.2) 1.75(44.4) 93126 500 MCM 1/2 Pink 6 .84(21.34) 1.32(33.53) 6.50(165.1) 2.5(63.5) 1.79(45.4) .47(11.9) .51(12.9) .63(16.0) 3.12(79.2) 1.75(44.4) 93128 600 MCM 1/2 Black 4 .92(23.37) 1.44(36.58) 6.75(171.4) 2.6(66.0) 1.96(49.7) .51(12.9) .51(12.9) .63(16.0) 3.12(79.2) 1.75(44.4) 93130 750 MCM 1/2 Yellow 4 1.03(26.16) 1.60(40.64) 7.37(187.2) 3.2(81.3) 2.19(55.6) .55(13.9) .51(12.9) .63(16.0) 3.12(79.2) 1.75(44.4) 15 POWER CONNECTORS Aluminum Long Barrel Compression Splices Lugs accept both aluminum and copper conductors Connector bores are coated with oxide inhibitor & capped Center stop assures proper cable installation Made of high-conductivity seamless aluminum Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity Color Coded for easy identification Marked with die index Crimp marks indicate proper crimp locations UL486B Listed AL9CU Listed for 35 KV when properly installed Dimension Measurements = Inches & (Millimeters) Cat No. Wire Range Color Code Box Qty Inside Diameter Outside Diameter Length 93208 93210 8 Str. 6 Str. Blue Gray 50 50 .18(4.5) .20(5.0) .31(7.3) .34(8.6) 1.50(38.1) 1.63(41.4) 93212 4 Str. Green 30 .25(6.3) .44(11.1) 2.00(50.8) 93214 2 Str. Pink 30 .31(7.8) .53(13.4) 2.38(60.4) 93216 1 Str. Gold 15 .35(8.8) .53(13.4) 2.38(60.4) 93218 1/0 Str. Tan 20 .39(9.9) .63(16.0) 2.50(63.5) 93220 2/0 Str. Olive 20 .44(1.1) .69(17.5) 2.63(66.8) 93222 3/0 Str. Ruby 15 .48(2.1) .76(19.3) 2.88(73.1) 93224 4/0 Str. White 10 .55(3.9) .84(21.3) 3.13(79.5) 93226 250 MCM Red 9 .59(4.9) .92(23.3) 3.25(82.5) 93228 300 MCM Blue 9 .65(6.5) 1.01(25.6) 3.25(82.5) 93230 350 MCM Brown 6 .721(8.2) 1.12(28.4) 3.88(98.5) 93232 400 MCM Green 6 .761(9.3) 1.19(30.2) 4.88(123.9) 93234 500 MCM Pink 6 .84(21.3) 1.32(33.5) 5.00(127.0) 93236 600 MCM Black 4 .92(23.3) 1.44(36.5) 5.13(130.3) 93238 750 MCM Yellow 4 1.03(26.1) 1.60(40.6) 5.38(136.6) 16 Each POWER CONNECTORS Copper 1 Hole Short Barrel Compression Lugs Made of high-conductivity copper tubing Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity Crimp marks indicate proper crimp locations Marked with die index and color codes for easy identification UL 486A Listed Listed for 35 KV when properly installed Dimension Measurements = Inches & (Millimeters) Cat No. Wire Stud Color Range Size Code Box Inside Qty Diameter Outside Diaeter A A1 B C D 94010 94012 8 Str. 8 Str. #10 1/4 Red Red 80 80 .172(4.4) 172(4.4) .272(6.9) .272(6.9) 1.34(34.0) 1.34(34.0) .44(11.2) .44(11.2) .42(10.7) .42(10.7) .08(2.0) .08(2.0) .21(5.3) .25(6.4) .29(7.4) .65(16.5) .29(7.4) .65(16.5) E F 94016 6 Str. #10 Blue 60 .203(5.2) .297(7.5) 1.77(45.0) .81(20.6) .42(10.7) .08(2.1) .21(5.3) .31(7.9) .69(17.5) 94018 6 Str. 1/4 Blue 60 .203(5.2) .297(7.5) 1.77(45.0) .81(20.6) .42(10.7) .08(2.1) .25(6.4) 31(7.9) .69(17.5) 94020 6 Str. 5/16 Blue 60 .203(5.2) .297(7.5) 1.77(45.0) .81(20.6) .49(12.4) .07(1.7) .33(8.4) 31(7.9) .69(17.5) 94024 4 Str #10 Gray 45 .250(6.4) .344(8.7) 1.81(46.0) .81(20.6) .49(12.4) .09(2.2) .21(5.3) .36(9.1) .75(19.1) 94026 4 Str. 1/4 Gray 45 .250(6.4) .344(8.7) 1.81(46.0) .81(20.6) .49(12.4) .09(2.2) .25(6.4) .36(9.1) .75(19.1) 94028 4 Str 5/16 Gray 45 .250(6.4) .344(8.7) 1.81(46.0) .81(20.6) .49(12.4) .09(2.2) .33(8.4) .36(9.1) .75(19.1) 94030 4 Str 3/8 Gray 45 .250(6.4) .344(8.7) 1.81(46.0) .81(20.6) .56(14.2) .08(2.0) .41(10.5) .36(9.1) .75(19.1) 94034 2 Str. 1/4 Brown 25 .315(8.0) .422(10.7) 1.93(49.0) .88(22.4) .60(15.3) .10(2.6) .25(6.4) .37(9.4) .81(20.6) 94036 2 Str. 5/16 Brown 25 .315(8.0) .422(10.7) 1.93(49.0) .88(22.4) .60(15.3) .10(2.6) .33(8.4) .37(9.4) .81(20.6) 94038 2 Str. 3/8 Brown 25 .315(8.0) .422(10.7) 1.93(49.0) .88(22.4) .60(15.3) .10(2.6) .41(10.5) .37(9.4) .81(20.6) 94042 1 Str. 1/4 Green 20 .360(9.1) .469(11.9) 2.01(51.0) .88(22.4) .67(17.1) .11(2.7) .25(6.4) .37(9.4) .81(20.6) 94044 1 Str. 5/16 Green 20 .360(9.1) .469(11.9) 2.01(51.0) .88(22.4) .67(17.1) .11(2.7) .33(8.4) .37(9.4) .81(20.6) 94046 1 Str. 3/8 Green 20 .360(9.1) .469(11.9) 2.01(51.0) .88(22.4) .67(17.1) .11(2.7) .41(10.5) .37(9.4) .81(20.6) 94050 1/0 Str. 1/4 Pink 12 .390(9.9) .520(13.2) 2.01(51.0) .88(22.4) .74(18.9) .13(3.2) .25(6.4) .37(9.4) .81(20.6) 94052 1/0 Str. 5/16 Pink 12 .390(9.9) .520(13.2) 2.01(51.0) .88(22.4) .74(18.9) .13(3.2) .33(8.4) .37(9.4) .81(20.6) 94054 1/0 Str. 3/8 Pink 12 .390(9.9) .520(13.2) 2.01(51.0) .88(22.4) .74(18.9) .13(3.2) .41(10.5) .37(9.4) .81(20.6) 94058 2/0 Str. 1/4 Black 10 .441(11.2) .563(14.3) 2.32(59.0) .94(23.9) .81(20.7) .12(3.0) .25(6.4) .48(12.2) 1.06(26.9) 94060 2/0 Str. 5/16 Black 10 .441(11.2) .563(14.3) 2.32(59.0) .94(23.9) .81(20.7) .12(3.0) .33(8.4) .48(12.2) 1.06(26.9) 94062 2/0 Str. 3/8 Black 10 .441(11.2) .563(14.3) 2.32(59.0) .94(23.9) .81(20.7) .12(3.0) .41(10.5) .48(12.2) 1.06(26.9) 94064 2/0 Str. 1/2 Black 10 .441(11.2) .563(14.3) 2.32(59.0) .94(23.9) .81(20.7) .12(3.0) .51(13.0) .48(12.2) 1.06(26.9) 94066 3/0 Str. 1/4 Orange 20 .492(12.5) .622(15.8) 2.52(64.0) 1.0(25.4) .90(22.9) .13(3.2) .25(6.4) .48(12.2) 1.06(26.9) 94068 3/0 Str. 5/16 Orange 20 .492(12.5) .622(15.8) 2.52(64.0) 1.0(25.4) .90(22.9) .13(3.2) .33(8.4) .48(12.2) 1.06(26.9) 94070 3/0 Str. 3/8 Orange 20 .492(12.5) .622(15.8) 2.52(64.0) 1.0(25.4) .90(22.9) .13(3.2) .41(10.5) .48(12.2) 1.06(26.9) 94072 3/0 Str. 1/2 Orange 20 .492(12.5) .622(15.8) 2.52(64.0) 1.0(25.4) .90(22.9) .13(3.2) .51(13.0) .48(12.2) 1.06(26.9) 94074 4/0 Str. 1/4 Purple 20 .547(13.9) .688(17.5) 2.52(64.0) 1.00(25.4) 1.00(25.4) .13(3.4) .25(6.4) .48(12.2) 1.06(26.9) 94076 4/0 Str. 5/16 Purple 20 .547(13.9) .688(17.5) 2.52(64.0) 1.00(25.4) 1.00(25.4) .13(3.4) .33(8.4) .48(12.2) 1.06(26.9) 94078 4/0 Str. 3/8 Purple 20 .547(13.9) .688(17.5) 2.52(64.0) 1.00(25.4) 1.00(25.4) .13(3.4) .41(10.5) .48(12.2) 1.06(26.9) 94080 4/0 Str. 1/2 Purple 20 .547(13.9) .688(17.5) 2.52(64.0) 1.00(25.4) 1.00(25.4) .13(3.4) .51(13.0) .48(12.2) 1.06(26.9) 94082 250MCM 3/8 Yellow 15 .594(15.1) .750(19.1) 2.64(67.0) 1.06(26.9) 1.09(27.7) .15(3.8) .41(10.5) .48(12.2) 1.06(26.9) 94084 250MCM 1/2 Yellow 15 .594(15.1) .813(20.7) 2.64(67.0) 1.06(26.9) 1.19(30.2) .15(3.8) .51(13.0) .48(12.2) 1.06(26.9) 94086 300MCM 1/2 White 15 .658(16.7) .813(20.7) 2.64(67.0) 1.06(26.9) 1.19(30.2) .15(3.8) .51(13.0) .48(12.2) 1.06(26.9) 94088 350MCM 1/2 Red 10 .700(17.8) .875(22.2) 2.80(71.0) 1.12(28.4) 1.28(32.4) .17(4.2) .51(13.0) .48(12.2) 1.06(26.9) 94090 400MCM 1/2 Blue 10 .764(19.4) .949(24.1) 3.07(78.0) 1.19(30.2) 1.39(35.2) .18(4.5) .51(13.0) .52(13.2) 1.25(31.8) 94094 500MCM 1/2 Brown 6 .835(21.2) 1.063(27.0) 3.31(84.0) 1.38(35.0) 1.54(39.1) .22(5.5) .51(13.0) .52(13.2) 1.25(31.8) 94096 600MCM 5/8 Green 4 .925(23.5) 1.188(30.2) 3.66(93.0) 1.38(35.0) 1.72(43.6) .25(6.4) .67(17.0) .69(17.5) 1.45(36.8) 94098 750MCM 5/8 Black 4 1.03(26.2) 1.31(33.3) 3.94(100.0) 1.63(41.4) 1.90(48.3) .27(6.8) .67(17.0) .69(17.5) 1.45(36.8) 94099 1000MCM 3/4 White 3 1.19(30.2) 1.53(38.8) 5.12(130.0) 1.93(49.0) 2.19(55.6) .32(8.1) .80(20.3) .17(18.0) 1.97(50.0) Each 17 POWER CONNECTORS Copper 1 Hole Long Barrel Compression Lugs Made of high-conductivity copper tubing Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity Crimp marks indicate proper crimp locations Marked with die index and color codes for easy identification UL 486A Listed Listed for 35 KV when properly installed Dimension Measurements = Inches & (Millimeters) Cat No. Wire Range Stud Size Color Code Box Inside Qty Diameter Outside Diameter 94214 6 Str. 1/4 Blue 40 .203(5.2) .297(7.5) 2.01(51.0) 1.12(28.4) .42(10.7) .08(2.1) .25(6.4) .29(7.4) .65(16.5) 94218 4 Str. 1/4 Gray 30 .250(6.4) .344(8.7) 2.05(52.0) 1.12(28.4) .49(12.4) .09(2.2) .25(6.4) .29(7.4) .65(16.5) 94222 2 Str. 5/16 Brown 15 .315(8.0) .422(10.7) 2.24(57.0) 1.25(31.8) .60(15.3) .10(2.6) .33(8.4) .38(9.4) .75(19.1) 94226 1 Str. 5/16 Green 15 .360(9.1) .469(11.9) 2.32(59.0) 1.25(31.8) .67(17.1) .11(2.7) .33(8.4) .38(9.4) .75(19.1) 94230 1/0 Str. 5/16 Pink 10 .390(9.9) .520(13.2) 2.56(65.0) 1.38(35.1) .74(18.9) .13(3.2) .33(8.4) .41(10.2) .81(20.6) 94234 1/0 Str. 3/8 Pink 10 .390(9.9) .520(13.2) 2.56(65.0) 1.38(35.1) .74(18.9) .13(3.2) .41(10.5) .41(10.2) .81(20.6) 94238 2/0 Str. 3/8 Black 10 .441(11.2) .563(14.3) 2.64(67.0) 1.50(38.1) .81(20.7) .12(3.0) .41(10.5) .48(10.2) .81(20.6) 94246 3/0 Str. 1/2 Orange 20 .492(12.5) .622(15.8) 3.03(77.0) 1.50(38.1) .90(22.9) .13(3.2) .51(13.0) .48(12.2) 1.06(26.9) 94254 4/0 Str. A A1 B C D E F 1/2 Purple 15 .547(13.9) .688(17.5) 3.23(82.0) 1.62(41.1) 1.00(25.4) .13(3.4) .51(13.0) .52(13.2) 1.06(26.9) 94258 250 MCM 1/2 Yellow 10 .594(15.1) 94262 300 MCM 1/2 White 10 .658(16.7) .813(20.7) 3.58(91.0) 2.00(50.1) 1.19(30.2) .15(3.8) .51(13.0) .52(13.2) 1.06(26.9) 94266 350 MCM 1/2 Red 8 .700(17.8) .875(22.2) 3.70(94.0) 2.00(50.1) 1.28(32.4) .17(4.2) .51(13.0) .52(13.2) 1.06(26.9) 94270 400 MCM 1/2 Blue 6 .764(19.4) .949(24.1) 4.02(102.0) 2.00(50.1) 1.39(35.2) .18(4.5) .51(13.0) .52(13.2) 1.35(34.3) 94274 400 MCM 5/8 Blue 6 .764(19.4) .949(24.1) 4.02(102.0) 2.00(50.1) 1.39(35.2) .18(4.5) .67(17.0) .52(13.2) 1.35(34.3) 94278 500 MCM 1/2 Brown 8 .835(21.2) 1.063(27.0) 4.41(112.0) 2.25(57.2) 1.54(39.1) .22(5.5) .51(13.0) .52(13.2) 1.35(34.3) 94282 500 MCM 5/8 Brown 8 .835(21.2) 1.063(27.0) 4.41(112.0) 2.25(57.2) 1.54(39.1) .22(5.5) .67(17.0) .52(13.2) 1.35(34.3) 94286 600 MCM 5/8 Green 6 .925(23.5) 1.188(30.2) 4.80(122.0) 2.50(63.5) 1.72(43.6) .25(6.4) .67(17.0) .69(17.5) 1.45(36.8) 94290 750 MCM 5/8 Black 4 1.03(26.2) 1.31(33.3) 5.28(134.0) 2.88(73.2) 1.90(48.3) .27(6.8) .67(17.0) .69(17.5) 1.45(36.8) 18 .75(19.1) 3.23(82.0) 1.62(41.1) 1.09(27.7) .15(3.8) .51(13.0) .52(13.2) 1.06(26.9) Each POWER CONNECTORS Copper 2 Hole Long Barrel Compression Lugs Made of high-conductivity copper tubing Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity Crimp marks indicate proper crimp locations Marked with die index and color codes for easy identification UL 486A Listed Listed for 35 KV when properly installed Dimension Measurements = Inches & (Millimeters) Cat No. 94310 Wire Range 8 Str. Stud Hole Size Spacing #10 5/8 Color Red Box Qty 45 A 2.32(59.0) A1 .75(19.1) B C D .42(10.7) .08(2.0) .21(5.3) E F G Each .28(7.1) 1.25(31.8) .625(15.9) 94312 8 Str. 1/4 5/8 Red 45 2.32(59.0) .75(19.1) .42(10.7) .08(2.0) .25(6.4) .28(7.1) 1.25(31.8) .625(15.9) 94316 6 Str. 1/4 5/8 Blue 35 2.68(68.0) 1.12(28.4) .50(10.7) .06(2.1) .25(6.4) .28(7.1) 1.25(31.8) .625(15.9) 94324 4 Str. 1/4 5/8 Gray 25 2.76(70.0) 1.12(28.4) .49(12.4) .09(2.2) .25(6.4) .28(7.1) 1.25(31.8) .625(15.9) 94326 94330 4 Str. 1/2 1 3/4 Gray 30 4.49(114.0) 1.12(28.4) .78(19.8) .06(1.4) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 2 Str. 5/16 3/4 Brown 30 3.27(83.0) 1.25(31.8) .60(15.3) .10(2.6) .33(8.4) .32(8.1) 1.62(41.1) 94332 2 Str. 5/16 7/8 Brown 20 3.27(83.0) 1.25(31.8) .60(15.3) .10(2.6) .33(8.4) .32(8.1) 1.62(41.1) .875(22.2) 94334 2 Str. 1/2 1 3/4 Brown 20 4.65(118.0) 1.25(31.8) .81(20.5) .08(2.0) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 94338 1 Str. 1/4 5/8 Green 15 2.87((73.0) 1.25(31.8) .67(17.1) .11(2.7) .25(6.4) .28(7.1) 1.25(31.8) .625(15.9) 94340 1 Str. 5/16 7/8 Green 30 3.27(83.0) .32(8.1) 1.62(41.1) .875(22.2) 94342 1 Str 1/2 1 3/4 Green 30 4.65(118.0) 1.25(31.8) .78(19.8) .09(2.3) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 94346 1/0 Str. 5/16 7/8 Pink 25 3.39(86.0) 1.38(35.1) .74(18.9) .13(3.2) .33(8.4) 94348 1/0 Str. 3/8 1 Pink 25 3.58(91.0) 1.38(35.1) .74(18.9) .13(3.2) .41(10.5) .38(9.7) 1.81(46.0) 1.00(25.4) 94350 1/0 Str. 1/2 1 3/4 Pink 25 4.76(121.0) 1.38(35.1) .78(19.8) .12(3.1) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 94354 2/0 Str. 3/8 1 Black 20 3.86(98.0) 94356 2/0 Str. 1/2 1 3/4 Black 20 5.04(128.0) 1.50(38.1) .81(20.7) .12(3.0) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 94360 3/0 Str. 3/8 1 Orange 15 3.98(101.0) 1.50(38.1) .90(22.9) .13(3.2) .41(10.5) .38(9.7) 1.81(46.0) 1.00(25.4) 94362 3/0 Str. 1/2 1 3/4 Orange 20 5.16(131.0) 1.50(38.1) .90(22.9) .13(3.2) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 94366 4/0 Str. 3/8 1 Purple 12 4.09(104.0) 1.62(41.1) 1.00(25.4) .13(3.4) .41(10.5) .38(9.7) 1.81(46.0) 1.00(25.4) 94368 4/0 Str. 1/2 1 3/4 Purple 20 5.28(134.0) 1.62(41.1) 1.00(25.4) .13(3.4) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 1.25(31.8) .67(17.1) .11(2.7) .33(8.4) .75(19.1) .32(8.1) 1.62(41.1) .875(22.2) 1.50(38.1) .81(20.7) .12(3.0) .41(10.5) .38(9.7) 1.81(46.0) 1.00(25.4) 94372 250 MCM 3/8 1 Yellow 12 4.17(106.0) 1.62(41.1) 1.09(27.7) .15(3.8) .41(10.5) .38(9.7) 1.81(46.0) 1.00(25.4) 94374 250 MCM 1/2 1 3/4 Yellow 15 5.35(136.0) 1.62(41.1) 1.09(27.7) .15(3.8) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 94378 300 MCM 1/2 1 3/4 White 12 5.79(147.0) 2.00(50.1) 1.19(30.2) .15(3.8) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 94382 350 MCM 1/2 1 3/4 Red 10 5.83(148.0) 2.00(50.1) 1.28(32.4) .17(4.2) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 94386 400 MCM 1/2 1 3/4 Blue 10 5.94(151.0) 2.00(50.1) 1.39(35.2) .18(4.5) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 94390 500 MCM 1/2 1 3/4 Brown 8 6.22(158.0) 2.25(57.2) 1.54(39.1) .22(5.5) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 94394 600 MCM 1/2 1 3/4 Green 6 6.57(167.0) 2.50(63.5) 1.72(43.6) .25(6.4) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 94398 750 MCM 1/2 1 3/4 Black 4 6.93(176.0) 2.88(73.2) 1.90(48.3) .27(6.8) .51(13.0) .62(15.7) 3.00(76.2) 1.75(44.5) 19 POWER CONNECTORS Copper Short Barrel Compression Splices Made of high-conductivity copper tubing Center stop assures proper cable installation Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity Crimp marks indicate proper crimp locations Marked with die index and color codes for easy identification UL 486A Listed Listed for 35 KV when properly installed Dimension Measurements = Inches & (Millimeters) Cat No. 94410 94412 94414 94416 94418 94420 94422 94424 94426 94428 94430 94432 94434 94436 94438 94440 94442 Wire Range 8 Str. 6 Str. 4 Str. 2 Str. 1 Str. 1/0 Str. 2/0 Str. 3/0 Str. 4/0 Str. 250 MCM 300 MCM 350 MCM 400 MCM 500 MCM 600 MCM 750 MCM 1000 MCM Color Code Red Blue Gray Brown Green Pink Black Orange Purple Yellow White Red Blue Brown Green Black ——- Box Qty 80 60 45 25 20 15 10 20 20 20 18 15 10 6 4 3 1 Inside Diameter .172(4.4) .203(5.2) .250(6.4) .315(8.0) .360(9.1) .390(9.9) .441(11.2) .492(12.5) .547(13.9) .594(15.1) .658(16.7) .700(17.8) .764(19.4) .835(21.2) .925(23.5) 1.03(26.2) 1.19(30.2) Outside Diameter .272(6.9) .297(7.5) .344(8.7) .422(10.7) .469(11.9) .520(13.2) .563(14.3) .622(15.8) .688(17.5) .750(19.1) .813(20.7) .875(22.2) .949(24.1) 1.063(27.0) 1.188(30.2) 1.31(33.3) 1.53(38.8) Length 1.06(26.9) 1.73(43.9) 1.73(43.9) 1.85(47.0) 1.85(47.0) 1.85(47.0) 2.01(51.1) 2.13(54.1) 2.13(54.1) 2.24(56.9) 2.24(56.9) 2.36(59.9) 2.52(64.0) 2.87(72.9) 2.87(72.9) 3.39(86.1) 3.70 (94.0) Each Copper Long Barrel Compression Splices Made of high-conductivity copper tubing Center stop assures proper cable installation Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity Crimp marks indicate proper crimp locations Marked with die index and color codes for easy identification UL 486A Listed Listed for 35 KV when properly installed Dimension Measurements = Inches & (Millimeters) 20 Cat No. Wire Range Color Code Box Qty Inside Diameter Outside Diameter Length 94510 94512 94514 94516 94518 94520 94522 94524 94526 94528 94530 94532 94534 94536 94538 94540 94542 8 Str. 6 Str. 4 Str. 2 Str. 1 Str. 1/0 Str. 2/0 Str. 3/0 Str. 4/0 Str. 250 MCM 300 MCM 350 MCM 400 MCM 500 MCM 600 MCM 750 MCM 1000 MCM Red Blue Gray Brown Green Pink Black Orange Purple Yellow White Red Blue Brown Green Black —— 60 40 25 18 15 10 20 16 12 12 9 6 6 6 4 4 1 .172(4.4) .203(5.2) .250(6.4) .315(8.0) .360(9.1) .390(9.9) .441(11.2) .492(12.5) .547(13.9) .594(15.1) .658(16.7) .700(17.8) .764(19.4) .835(21.2) .925(23.5) 1.03(26.2) 1.19(30.2) .272(6.9) .297(7.5) .344(8.7) .422(10.7) .469(11.9) .520(13.2) .563(14.3) .622(15.8) .688(17.5) .750(19.1) .813(20.7) .875(22.2) .949(24.1) 1.063(27.0) 1.188(30.2) 1.31(33.3) 1.53(38.8) 2.01(51.1) 2.36(59.9) 2.36(59.9) 2.60(66.0) 2.87(72.9) 2.87(72.9) 3.11(79.0) 3.11(79.0) 3.39(86.1) 3.39(86.1) 4.13(104.9) 4.13(104.9) 4.37(111.0) 4.61(117.1) 5.35(135.9) 5.87(149.1) 6.12 (155.4) Each POWER CONNECTORS Meter Socket Lugs 840 common dies - one die installs all sizes For meter pan and general application Accepts both aluminum and copper conductors Made of high conductivity aluminum Connector bores are coated with oxide inhibiting compound Tin Plated Marked with conductor sizes and die references Meet or exceed Class A requirements of ANSI C119.4 Dimension Measurements = Inches Wire Size—Aluminum or Copper - A 3 1/4 A1 1 3/8 B 1 15/16 F 1 5/16 Stud Size D 3/8 - 3 1/4 1 3/8 1 15/16 1 5/16 3/8 2&1 1 3 1/4 1 3/8 1 15/16 1 5/16 3/8 1/0 1/0 3 1/4 1 3/8 1 15/16 1 5/16 3/8 1/0 2/0 2/0 3 1/4 1 3/8 1 15/16 1 5/16 3/8 2/0 2/0 3/0 3/0 3 1/4 1 3/8 1 15/16 1 5/16 3/8 93914 2/0 2/0 3/0 3/0 3 1/4 1 3/8 1 15/16 1 5/16 1/2 93916 3/0 3/0 4/0 - 3 1/4 1 3/8 1 15/16 1 5/16 3/8 93920 4/0 4/0 250 - 3 1/4 1 3/8 1 15/16 1 5/16 3/8 93922 4/0 4/0 250 - 3 1/4 1 3/8 1 15/16 1 5/16 1/2 Cat No. 93902 Concentric Compressed Compact Solid 6 6 6 93904 4 4 4 93906 2 2 93908 1 1 93910 1/0 93912 Entrance Splicers Each Meets or exceed Class A-3 requirements of ANSI C119.4, when properly installed on aluminum to aluminum or aluminum to copper conductors High conductivity aluminum splices have solid center barriers and large chamfers to ease cable insertion Coated with oxide inhibitor compound Tough stabilized nylon sleeves resist installing tool pressure, providing reliable 600 volt insulation Color coded and marked with catalog numbers, strip lengths, installing die references and compression locations Use Morris tool #50085 & die #50086 to crimp splicer 2-25/32” Length Cat No. 90672 90680 90684 90688 90690 90694 Model UYR 02 D URR 22 D URB 26 D UOO 44 D UOB 46 D UBB 66 D CONDUCTOR A CONDUCTOR B AL OR CU AL OR CU Color Yellow Red Red Orange Orange Blue Sol 2 2 4 Str 1/0 1&2 1&2 4 4 6 ACSR 1/0 2 2 4 4 6 Color Red Red Blue Orange Blue Blue Sol 4 2 4 4 Str 1&2 1&2 6 4 6 6 ACSR 2 2 6 4 6 6 Box Qty 100 100 100 100 100 100 Each 5-1/2” Length Cat No. 90668 90669 ACSR 2/0 4/0 CONDUCTOR A CONDUCTOR B AL OR CU AL OR CU Concentric 2/0 4/0 Compressed 2/0 4/0 Compact 2/0 250 ACSR 2/0 2/0 Concentric 2/0 2/0 Compressed 2/0 2/0 Compact 3/0 3/0 Box Qty 100 25 Each 21 POWER CONNECTORS Installation Tooling For Dual Rated Aluminum Connectors o o MORRIS CONNECTORS UL LISTED AND cUL CERTIFIED 90 C (194 F), 600 VOLTS TO 35KV FOR THESE TOOLS FOR APPLICATIONS GREATER THAN 2000 VOLTS CONSULT CABLE MANUFACTURER FOR VOLTAGE STRESS RELIEF INSTRUCTIONS MORRIS Aluminum Compression Connectors and Splices are Manufactured from High Conductivity Aluminum Seamless Tubing, Tin Plated and Prefilled with Anti-Oxidant. Each Connector is Color Coded for Quick Easy Identification and use with Matching Color Coded Dies. THOMAS & BETTS Die Color Code Wire Strip Length TBM12M Die Index BURNDY TBM15* TBM14M 13642 21940 Die Index Die Index Die Index Y35,Y39, Y45* Die Sets ILSCO Y46 DIE SETS ILC-12, WITH P-UADP ILC-12H, Adapter Die Index Die Index BLACKBURN ILC-14 ILC- JB12A/B JB60A/B* 14H, ILC-15 HCT1239 Die Index HCT7508/7508H PANDUIT PNN UNION CT2920,CT940CH* CT930,CT930CH CT920,CT920CH TPU-12BH TPU-15BH* Catalog Number Cable Size MLA6, MA6 6 AWG Gray 11/16” 29 29 29 29 U6CABT U6CABT 346 ILD-3 ILD-3 B74CH CD-920-4 T-346 MLA4, MA4 4 AWG Green 1” 37 37 37 37 U4CABT U4CABT 375 ILD-4 ILD-4 B05CH CD-920-1 T-11/375 MLA2, MA2 2 AWG Pink 1 1/16” 42H 42H 42 42 U2CABT U2CABT 348 ILD-7 ILD-7 B06CHI CD-920-1/0 T-12/348 MLA1, MA1 1 AWG Gold 1 1/16” 45 45 45 45 U1CART U1CART 471 ILD-7 ILD-7 B06CHI CD-920-2/0 T-471 MLA1/0, 2MLA1/0, MA1/0 1/0 AWG Tan 1 1/8” 50 50 50 50 U25ART U25ART 296 ILD-8 ILD-8 B08CH CD-920-3/0 T-296 MLA2/0,2MLA2/0, MA2/0 2/0 AWG Olive 1 1/4” 54H 54H 54 54 U26ART U26ART 297 ILD-10 ILD-10 B09CH CD-920-4/0 T-297 MLA3/0, 2MLA3/0, MA3/0 3/0 AWG Ruby 1 1/4” 60 60 60 60 U27ART U27ART 467 ILD-10 ILD-10 B26CH CD-920-250 T-467 MLA4/0, 2MLA4/0, MA4/0 4/0 AWG White 1 5/16” 66 66 66H 66 U28ART U28ART 298 ILD-12 ILD-12 B10CHI CD-920-300 T-298 MLA250, 2MLA250, MA250 250 MCM Red 1 3/8” 71H 71H 71H 71 U29ART U29ART 324 ILD-13 ILD-13 B11CH CD-920-350 T-18/324 MLA300, 2MLA300, MA300 300 MCM Blue 1 7/16” 76 76 76H 76 U30ART U30ART 470 ILD-14 ILD-14 B11CH CD-920-400 T-470 MLA350, 2MLA350, MA350 350 MCM Brown 1 3/4” 87H 87H 87H 87 U31ART U31ART 299 ILD-14 ILD-14 B12CHI CD-920-500 T-20/299 MLA400, 2MLA400, MA400 400 MCM Green 2 1/4” 94H 94H 94H 94 U32ART U32ART 472 ILD-16 ILD-16 B36CH CD-920-800 T-22/472 MLA500, 2MLA500, MA500 500 MCM Pink 2 1/4” 99H 99H 99H 99 U34ART U34ART 300 ILD-16A B76CH CD-920-500A T-300 MLA600, 2MLA600, MA600 600 MCM Black 2 3/8” 106H 106H 106H 106 U36ART U36ART 473 ILD-17 6039RT* CD-920-750 CD940-750* T-473 MLA750, 2MLA750, MA750 750 MCM Yellow Red 2 5/8” 115H 115H 115H 115 U39ART (NOT IN Y35) U39ART U39ART W/O P-UADP 936 301 ILD-18 6024AH* CD-940-750A* NOTES *TBM15 REQUIRES 15500 ADAPTOR *Y45 REQUIRES PT6515 ADAPTER *JB60A/B REQUIRES U-ADP ONLY *CT940CH TOOL *TPU-15BH REQUIRES CD-940- REQUIRES DA ADAPTER FOR ADAPTER CD-120 DIES Installation Tooling For Copper Connectors o o MORRIS CONNECTORS UL LISTED AND cUL CERTIFIED 90 C (194 F), 600 VOLTS TO 35KV FOR THESE TOOLS FOR APPLICATIONS GREATER THAN 2000 VOLTS CONSULT CABLE MANUFACTURER FOR VOLTAGE STRESS RELIEF INSTRUCTIONS MORRIS Copper Compression Connectors and Splices are Manufactured from High Strength Pure Electrolytic Copper To Insure Both Maximum Strength and Conductivity. Each Connector is Color Coded for Quick Easy Identification and use with Matching Color Coded Dies. THOMAS & BETTS Die Color Code Tbm12M Die Index TBM15* TBM4M Die Index 13400 13642 Die Index BURNDY 21940 Die Index Y35, Y39, Y45*, Y46**, Y750 Die Sets ILSCO Die Index ILC-12, ILC-12H, Die Index BLACKBURN PANDUIT PNN UNION ILC-15 Die Index JB12A/B JB60A/B* HCT1239 HCT7508/7508H CT2920,CT940CH* CT930,CT930CH CT920,CT920CH TPU-12BH TPU15BH* Catalog Number Cable Size MLC,MLLC,2MLLC,MS,MSL 8 AWG Red 21 21 21 U8CRT 49 ILD-1 ILD-1 B71CH CD-920-8 T-6/T-11 MLC,MLLC,2MLLC,MS,MSL 6 AWG Blue 24 24 24 U5CRT OR U8CABT 7 OR 374 ILD-2 ILD-2 B73CH CD-920-6 T-7/374 MLC,MLLC,2MLLC,MS,MSL 4 AWG Gray 29 29 29 29 U4CRT OR U6CABT 8 OR 346 ILD-3 ILD-3 B74CH CD-920-4 T-8 MLC,MLLC,2MLLC,MS,MSL 2 AWG Brown 33 33 33 33 U2CRT 10 ILD-4 ILD-4 B75CH CD-920-2 T-10 MLC,MLLC,2MLLC,MS,MSL 1 AWG Green 37 37 37 37 U1CRT OR U4CABT 11 OR 375 ILD-4 ILD-4 B05CH CD-920-1 T-11/375 MLC,MLLC,2MLLC,MS,MSL 1/0 AWG Pink 42 42H 42 42 U25RT OR U2CART 12 OR 348 ILD-5 ILD-5 B06CHI CD-920-1/0 T-12/348 MLC,MLLC,2MLLC,MS,MSL 2/0 AWG Black 45 45 45 45 U26RT 13 ILD-6 ILD-6 B72CH CD-920-2/0 T-13 MLC,MLLC,2MLLC,MS,MSL 3/0 AWG Orange 50 50 50 50 U27RT 14 ILD-9 ILD-9 B08CH CD-920-3/0 T-14 MLC,MLLC,2MLLC,MS,MSL 4/0 AWG Purple 54 54H 54 54H U28RT 15 ILD-10 ILD-10 B09CH CD-920-4/0 T-15 MLC,MLLC,2MLLC,MS,MSL 250 MCM Yellow 62 62 62 62 U29RT 16 ILD-11 ILD-11 B26CH CD-920-250 T-16 MLC,MLLC,2MLLC,MS,MSL 300 MCM White 66H 66 66H 66 U30RT OR U28ART 17 OR 298 ILD-12 ILD-12 B10CH OR B10CHI CD-920-300 T-17 MLC,MLLC,2MLLC,MS,MSL 350 MCM Red 71H 71H 71H 71 U31RT OR 29ART 18 OR 324 ILD-13 ILD-13 B11CH CD-920-350 T-18/324 MLC,MLLC,2MLLC,MS,MSL 400 MCM Blue 76H 76 76H 76 U32RT OR U30ART 19 OR 470 ILD-14 ILD-14 B11CH CD-920-400 T-19/470 MLC,MLLC,2MLLC,MS,MSL 500 MCM Brown 87H 87H 87H 87 U34RT OR U31ART 20 OR 299 ILD-15 B12CH OR B12CHI CD-920-500 T-20/299 MLC,MLLC,2MLLC,MS,MSL 600 MCM Green 94H 94H 94H 94 U36RT OR U32ART 22 OR 472 ILD-16 B36CH CD-920-600 T-22/472 MLC,MLLC,2MLLC,MS,MSL 750 MCM Black 106H 106H 106 U39RT 24 ILD-17 B39CH** CD-920-750A NOTES 22 *TBM15 REQUIRES 15500 ADAPTOR *Y45 REQUIRES PT6515 ADAPTER **Y46 DIE SETS WITH P-UADP ADAPTER *JB60A/B REQUIRE U-ADP ONLY **HCT TOOLS ONLY *CT940CH TOOL *TPU-15BH REQUIRES CD-940- REQUIRES DA ADAPTER ADAPTER FOR CD-120 DIES ONLY POWER CONNECTORS Copper Mechanical Offset Connectors For Copper Conductors Plain copper finish Rated 600 Volts Steel plated screws to prevent rusting Easy to install with screwdriver, wrench or pliers Manufactured from high strength pure electrolytic copper to insure both maximum strength and conductivity Conductors are inserted between arched pressure bar and V -bottom collar which positions the wire for positive contact and maximum secureness Single Offset Connectors Dimensions = Inches UL486A Cat. No. 90514 90515 90516 90518 90520 90522 90524 90526 90528 Rating 35A 70A 90A 125A 175A 225A 300A 400A 650A Wire Range 6 - 14 4 - 14 2-8 1/0 - 2 3/0 - 4 4/0 - 2 350MCM - 1/0 500MCM - 4/0 1000MCM - 600MCM L 1.19 1.31 1.22 1.97 2.19 2.63 3.19 4.25 4.63 W 0.38 0.50 0.50 0.63 0.75 1.00 1.00 1.50 2.00 H 0.75 0.81 1.00 1.34 1.56 1.81 2.63 2.75 3.69 Bolt 0.20 0.27 0.27 0.27 0.41 0.41 0.41 0.41 0.53 Box Qty 100 100 50 50 25 25 18 3 1 Each Double Offset Connectors Dimensions = Inches UL486A Cat. No. 90532 90534 90536 Rating 450A 600A 800A Wiire Range 2-4/0 1/0-350MCM 1/0-500MCM L 3.38 3.63 4.44 W 1.50 1.75 2.00 H .940 1.18 1.41 Bolt .41 .41 .53 Box Qty 6 6 3 Each Copper Mechanical Lugs For Copper Conductors Made from pure 100% conductive electrolytic copper Bright copper finish standard One piece-flat bottomed, for full contact, highest efficiency Completely re-usable No special installation tools required Metal stamped with conductor range UL486A listed for use with copper conductor UL486A Dimensions = Inches Cat No. 90550 90552 90554 90556 Wire Range 14 - 8 14 - 4 8 - 1/0 6 - 250MCM Bolt Size 3/16 1/4 5/16 3/8 Width 3/8 1/2 3/4 15/16 Height 3/8 3/32 3/4 1-1/16 Length 13/16 1-1/8 1/1/2 1-15/16 Pad Thickness 5/64 3/32 3/32 1/8 Screw Slotted Screw Slotted Screw 1/4” Hex Head 1/4” Hex Head Box Qty 100 100 50 25 Each Stranded Bi-Metallic Pin Terminal Connectors Cat No. Conductor Stranded Copper Pin Color Code Box Qty Each For Aluminum cables only Tin Plated with stranded copper pin Connector bores are coated with oxide inhibitor Supplied with EPDM insulating cover Rated 600 Volt 90642 90644 90646 90648 90650 90652 90654 90658 90660 90663 90664 90666 6 4 2 1 1/0 2/0 3/0 250 MCM 300 MCM 400 MCM 500 MCM 600 MCM 8 6 4 3 2 1 1/0 3/0 4/0 250MCM 350MCM 350MCM Gray Green Pink Gold Tan Olive Ruby Red Blue Green Pink Black 50 50 25 25 25 10 10 10 10 10 10 10 23 POWER CONNECTORS Aluminum Mechanical Lugs For Copper & Aluminum Conductors Dual rated for both copper and aluminum conductors and electro-tin plated to provide low contact resistance and protection against corrosion Assembly can be made with only a screwdriver or allen wrench and they are re-usable NEMA Drilling 1 3/4” Centers Rated 600V 194oF (90oC) 90712~90718 & 90812~90814 have slotted screws Manufactured from high strength 6061-T6 aluminum alloy to insure both maximum strength and conductivity UL486B LISTED AL9CU Dimensions = Inches Cat No. AWG Fig. Box Qty L W H Bolt 0.38 0.50 0.53 0.56 0.82 0.90 1.38 1.38 1.50 0.50 0.56 0.69 0.75 1.00 1.09 1.50 1.50 1.75 0.27 0.27 0.27 0.27 0.33 0.41 0.41 0.41 0.66 1.50 0.33 90712 90714 90716 90718 90720 90722 90724 90726 90728 6 2 1/0 2/0 250 350 500 600 750 90730 300 1 1 1 1 1 1 1 1 1 6STR. - 14SOL. 2STR. - 14SOL. 1/0STR. - 14SOL 2/0STR. - 14SOL. 250MCM - 6SOL. 350MCM - 6SOL. 500MCM - 4SOL. 600MCM - 2SOL. 750MCM - 300MCM 100 100 50 50 25 25 12 12 3 1.06 1.16 1.34 1.47 1.94 2.12 2.75 2.75 3.50 ONE CONDUCTOR - DUAL RANGE LUG - TWO HOLE MOUNT 2 300MCM - 2SOL. (2)2/0STR. - 4SOL. Cat No. AWG Fig. 90731 90732 90734 90735 90736 300 350 600 750 1000 3 3 3 3 3 FIGURE 3 Cat No. AWG Fig. 90812 90814 90816 90818 90820 90822 90824 1/0 2/0 300 350 600 750 1000 5 5 5 5 5 5 5 90841 90842 90844 90845 90847 300 350 600 750 1000 6 6 6 6 6 2.31 0.86 Wire Box Range Qty L ONE CONDUCTOR - TWO HOLE MOUNT W H Bolt 4.00 4.00 4.36 4.75 4.75 .93 .93 1.19 1.75 1.75 1.12 1.12 1.59 1.75 1.75 0.56 0.56 0.56 0.56 0.56 L W H Bolt 1.12 1.19 1.72 1.88 2.41 2.93 3.50 0.69 0.75 1.00 1.09 1.56 1.94 1.94 0.28 0.28 0.41 0.56 0.56 0.66 0.66 1.95 1.92 2.40 3.50 3.50 1.12 1.18 1.56 1.81 1.94 0.56 0.56 0.56 0.56 0.56 300MCM - 6SOL. 350MCM - 6SOL. 600MCM - 2SOL. 750MCM - 300MCM 1000MCM - 500MCM Wire Range 6 6 3 3 1 1 Box Qty TWO CONDUCTORS - ONE HOLE MOUNT FIGURE 5 1/0STR. - 14SOL. 2/0STR. - 14SOL. 300MCM - 6SOL. 350MCM - 6SOL. 600MCM - 2SOL. 750MCM - 300MCM 1000MCM - 350MCM 25 12 8 6 3 3 3 1.34 1.47 1.94 2.12 3.19 3.38 3.50 TWO CONDUCTORS - TWO HOLE MOUNT FIGURE 6 24 Each ONE CONDUCTOR - ONE HOLE MOUNT FIGURE 1 FIGURE 2 Wire Range 300MCM - 6SOL. 350MCM - 6SOL. 600MCM - 2SOL. 750MCM - 1/0STR. 1000MCM - 500MCM 3 3 3 3 3 4.00 4.25 4.46 4.72 4.81 Each Each POWER CONNECTORS Aluminum Mechanical Lugs For Copper & Aluminum Conductors Cat No. AWG Fig. Box Qty L W THREE CONDUCTORS - TWO & FOUR HOLE MOUNT 7 250MCM - 6SOL. 3 4.00 2.81 7 350MCM - 6SOL. 1 4.31 3.00 7 600MCM - 4SOL. 1 4.50 3.75 FIGURE 7 90852 90854 90858 Wire Range 300 350 600 H Bolt 1.19 1.38 1.56 0.56 0.56 0.56 90860 750 7 800MCM - 300MCM 1 4.75 4.50 1.75 0.56 90862 1000 7 1000MCM - 500MCM 1 4.75 4.50 1.75 0.56 Each FOUR CONDUCTORS - FOUR HOLE MOUNT FIGURE 8 90872 90874 90876 300 350 600 8 8 8 250MCM - 6SOL. 350MCM - 6SOL. 600MCM - 4SOL. 1 1 1 4.50 4.50 4.63 3.94 3.94 5.00 1.12 1.12 1.56 0.56 0.56 0.56 90878 750 90880 1000 8 800MCM - 300MCM 1 4.75 5.94 1.75 0.56 8 1000MCM - 500MCM 1 4.75 5.94 1.75 0.56 W H Bolt 1.25 1.44 1.62 1.56 1.81 1.94 0.56 0.56 0.56 1.56 0.56 FIGURE 9 Cat No. AWG Fig. Wire Range Box Qty L Each ONE CONDUCTOR - TWO HOLE MOUNT FIGURE 10 90941 90942 90944 600 750 1000 9 9 9 90951 600 10 Cat. No. AWG Fig. 90961 600 12 90964 90966 250 600 13 13 600MCM - 4SOL. 800MCM - 300MCM 1000MCM - 500MCM 3 3 3 5.19 4.72 4.81 TWO CONDUCTORS - TWO HOLE MOUNT 600MCM - 4SOL. 3 5.19 2.59 FIGURE 12 Wire Range Box Qty L W H Bolt 1.56 0.56 1.19 1.56 0.56 0.56 Each THREE CONDUCTORS - TWO & FOUR HOLE MOUNT FIGURE 13 600MCM - 4SOL. 1 5.19 3.94 FOUR CONDUCTORS - FOUR HOLE MOUNT 250MCM - 6SOL. 600MCM - 4SOL. 1 1 5.38 5.19 4.20 5.28 Line-Tap (H Tap) W C Grove A L Wide range, universal and reversible figure H-shaped aluminum connector Conductors are separated by the shape of the connector Bendable taps secure both run and tap conductors freeing the lineman’s hands to work with the installation tool Massive aluminum design minimizes corrosion due to Grove B galvanic erosion Prefilled with joint compound For Copper, Aluminum, ACSR and Compact Conductors Dimension Measurements = Inches Conductor Sizes Grove A Conductor Sizes Grove B Inches CA-Cu CAA CA-Cu CAA Cat No. Al-Cu AAC Ǿ mm Al-Cu AAC Ǿ mm C L W 90454 4 - 3/0 2 - 2/0 6-2 6-2 1.73 1.10 .71 90462 1/0-4/0 1/0-4/0 .37 - .56 1/0-4/0 1/0-4/0 37 - .56 2.48 1.38 .87 Box Qty 25 25 Case Qty Each 100 100 25 POWER CONNECTORS Aluminum Mechanical Lugs For Copper & Aluminum Conductors FIGURE 7 FIGURE 6 Cat. No. Wire Box Range Qty L W H PANELBOARD LUGS - 2 CONDUCTORS AWG Fig. Hole Space Bolt Each 90912 300 6 300MCM - 6SOL. 1 3.00 1.00 2.00 —- 0.31 90914 600 7 600MCM - 3/0STR. 3 4.94 1.50 3.00 1.38 0.41 90916 750 7 750MCM - 3/0STR. 3 4.94 1.50 3.00 1.38 0.41 PANELBOARD LUGS - 3 CONDUCTORS FIGURE 8 FIGURE 9 90918 600 8 600MCM - 3/0STR. 1 4.94 2.50 3.00 1.38 0.41 90920 750 8 750MCM - 3/0STR. 1 4.94 2.63 3.00 1.38 0.41 90924 600 9 600MCM - 3/0STR. 1 4.94 2.50 3.00 1.38 0.41 90926 750 9 750MCM - 3/0STR. 1 4.94 2.63 3.00 1.38 0.41 PANELBOARD LUGS - 4 CONDUCTORS Aluminum Lugs with Turn Prevent Set screw connectors with a turn prevent on the bottom of the tang to eliminate potential movement of the connector Made of 6061T-6 aluminum alloy Tin plated for low contact resistance Suitable for use with both copper and aluminum conductors Rated 600V FIGURE 1 Dimensions UL486B LISTED AL9CU FIGURE 2 Cat. No. Fig. Wire Range L W H Mtg. Turn Prevent to Hole Mtg. Hole Center Box Qty 91310 91311 91312 91314 1 1 1 1 4-14 1/0-14 2/0 - 14 300MCM - 6 1.16 1.47 1.468 2.000 .50 .63 0.625 0.984 .55 .81 0.781 1.125 .25 .25 .256 .437 .500 .500 .406 .492 50 24 91316 1 350MCM - 6 2.250 1.125 1.250 .344 .406 20 91317 1 500MCM - 2 2.500 1.375 1.812 .375 .875 6 91318 1 600MCM - 2 3.125 1.500 1.562 .531 .625 6 91320 2 350MCM - 6 2.250 1.812 1.250 .406 .492 8 91322 2 600MCM - 2 3.125 2.406 1.562 .531 .625 4 Each Copper Connector Extruded Style FIGURE 1 Solid one-piece copper connector made from extruded copper for superior mechanical strength and excellent electrical performance Steel screw Suitable for use with copper wire only Rated 600V Dimensions FIGURE 2 26 Cat. No. Fig. Wire Range L W H Bolt Box Qty 90560 90562 1 1 6-14 4-14 1.020 1.075 .375 .450 .400 .440 .193 .265 100 100 90564 1 2-14 1.125 .458 .484 .265 100 90566 1 1/0-14 1.277 .548 .660 .265 50 90568 1 4/0-2 1.950 .812 1.250 .406 25 90591 2 2/0-14 1.25 1.12 .78 .41 — 90592 2 250-6 1.71 1.62 .97 .56 — 90593 2 350-6 2.00 1.92 1.12 .56 — Each POWER CONNECTORS Aluminum Splicers/Reducers Dual rated for both copper and aluminum conductors Manufactured from high strength 6061-T6 aluminum alloy to insure both maximum strength and conductivity Electro tin plated to provide low contact resistance and protection against corrosion 90612~90614 use slotted screws Rated 600 Volts FIGURE 2 FIGURE 1 UL486B LISTED AL9CU Dimensions = Inches Cat No. Awg Figure Wire Range Box Qty L W H 90612 90614 90616 90617 90618 90620 90624 2 1/0 250 250 350 500 750 1 1 2 1 2 2 2 2 - 14 1/0 - 14 4/0-250MCM - 6 4/0-250MCM - 6 350MCM - 6 500MCM - 3/0 750MCM - 250MCM 50 25 10 10 10 3 1 1.12 1.50 3.94 2.00 4.34 4.19 6.06 0.44 0.53 1.00 .84 1.00 1.36 1.53 0.50 0.63 1.13 1.10 1.13 1.50 1.75 Each Aluminum Parallel & Tee Tap Connectors Dual rated for both copper and aluminum conductors and electro tin plated to provide low contact resistance and protection against corrosion Manufactured from high strength 6061-T6 aluminum alloy to insure both maximum strength and conductivity Dual entry wire holes allow for parallel or ‘T‘ tap connectors Assembly can be made with only a screwdriver or allen wrench and they are re-usable Rated 600 volt UL486B LISTED AL9CU Dimensions = Inches Cat No. AWG Main Wire Tap Wire Box Qty L W H 91012 91014 91016 91018 91020 91022 91023 2 1/0 250-1/0 250 350 500 750 2-12 1/0-2 250-1/0 250-1/0 350-4/0 500-350 750-500 4-14 1/0-14 1/0-14 250-6 350-6 500-2 500-2 50 25 25 12 12 12 6 1.39 1.75 2.25 2.00 2.56 3.13 3.38 0.63 0.75 1.00 1.00 1.25 1.38 1.50 0.88 1.00 1.31 1.31 1.44 1.75 2.00 Each Insulating Covers Flexible covers allow for either parallel or ‘T’ tap wire entry Secure snap eliminates the need for taping Rated 90oC 600 volt Dimensions = Inches Cat No AWG Cover Color Box Qty L W H 91112 91114 91116 91118 91120 91122 2 1/0 250 350 500 750 Yellow Gray Red Yellow Blue Orange 12 12 12 12 12 12 2-7/32 2-5/8 3-7/16 3-3/4 4-3/8 4-5/8 1-19/32 2-5/32 2-7/8 3-3/16 3-5/16 3-7/16 1-7/64 1-1/4 1-5/8 1-3/4 2-3/32 2-11/32 Each 27 POWER CONNECTORS Split Bolt Connectors For Copper Conductors UL listed for copper and copperweld stranded wires only Manufactured from compact, high strength, high copper alloy Free running threads and easy to grip wrench flats Highly resistant to season cracking and corrosion Provides a maximum pressure and ensures a secure connection on all combinations of connectors Rated 600 Volts UL486A Dimension Measurement = Inches AWG 8 6 Max Run To Max Tap 8-8 4-4 Min Run To Min Tap 10-16 8-14 Max Run To Min Tap 8-16 4-14 Min Equal Tap & Run 10-10 8-8 Torque In-Lb 88 165 B .472 .492 C .562 .625 L .854 .906 R .413 .413 V .145 .165 W .650 .722 Box Qty 100 100 90318 4 4-4 6-14 4-14 8-8 165 .709 .812 1.16 .579 .268 .938 50 90320 2 2-2 6-14 2-14 6-6 275 .748 .812 1.26 .614 .326 .938 50 90322 1/0 1/0-1/0 2-14 1/0-14 4-4 385 .787 .937 1.54 .708 .374 1.08 50 90324 90326 2/0 3/0 2/0-2/0 3/0-3/0 1-14 2/0-8 2/0-14 3/0-8 2-2 1-1 385 500 .866 1.10 1.06 1.25 1.69 2.09 .807 .976 .421 .531 1.28 1.45 25 25 90328 4/0-250 250-250 4/0-8 250-8 1-1 500 1.10 1.25 2.09 1.06 .579 1.45 25 90330 350 350-350 350-1/0 350-1/0 2/0-2/0 650 1.22 1.50 2.36 1.18 .700 1.73 12 90332 500 500-500 500-2/0 500-2/0 300-300 825 1.34 1.75 2.84 1.34 .815 2.10 12 90334 750 750-750 750-4/0 750-4/0 750-750 1000 1.94 2.13 3.77 1.93 1.18 2.39 1 Cat No. 90314 90316 Each Split Bolt Connectors With Spacer For Copper Conductors UL listed for copper and copperweld stranded wires only Manufactured from Compact, high strength, high copper alloy Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity Spacer separates dissimilar conductors and provides long contact length that prevents high pressure point contacts between run and tap connectors Free turning threads and easy to grip wrench flats Highly resistant to season cracking and corrosion Rated for 600 Volts UL486A Dimension Measurement = Inches Cat No. AWG 90360 3/0 90362 4/0-250 90364 350 90366 500 28 Max Run To Max Tap Min Run To Min Tap 3/0-3/0 250-250 350-350 500-500 2/0-8 4/0-8 350-1/0 500-2/0 Max Run Min Equal To Tap & Torque Min Tap Run In-Lb 3/0-8 250-8 350-1/0 500-2/0 1-1 1-1 2/0-2/0 300-300 500 500 650 825 B C H L R V W Box Qty 1.10 1.10 1.22 1.34 1.25 1.25 1.50 1.75 1.520 1.574 1.771 1.968 2.20 2.22 2.56 2.95 .976 1.06 1.18 1.34 .531 .579 .700 .815 1.45 1.45 1.73 2.10 25 25 12 12 Each POWER CONNECTORS Split Bolt Connectors With Spacer Dual Rated For Copper & Aluminum UL listed for all combinations of Aluminum, Aluminum to Copper, and Copper to Copper stranded wires 90412~90420 Manufactured from copper alloy, 90422~90426 manufactured from aluminum alloy Uniform bright electro-tin plating resists corrosion, reduces contact resistance and gives you maximum conductivity Spacer separates dissimilar conductors and provides long contact length that prevents high pressure point contacts between run and tap connectors Free turning threads and easy to grip wrench flats Highly resistant to season cracking and corrosion Anti Oxidant is recommended for all aluminum terminations Rated for 600 Volts UL486B Dimension Measurement = Inches Cat No. AWG 90412 6 90414 Max Run To Max Tap 4-4 4 Min Run Max Run Min Equal To To Tap & Temp Torque Min Tap Min Tap Run Rating In-Lb 8-14 4-14 8-8 750C 165 4-4 6-14 4-14 750C 8-8 0 B .492 C .625 H .830 L 1.06 R .413 V .165 W .722 Box Qty 100 165 .709 .812 1.04 1.24 .579 .268 .938 50 90416 2 2-2 6-14 2-14 6-6 75 C 275 .748 .812 1.13 1.44 .614 .326 .938 50 90418 1/0 1/0-1/0 2-14 1/0-14 4-4 750C 385 .787 .937 1.25 1.73 .708 .374 1.08 50 90420 2/0 2/0-2/0 1-14 2/0-14 2-2 750C 385 .866 1.06 1.30 1.71 .807 .421 1.23 25 0 90422 4/0 4/0-4/0 2-6 4/0-6 90 C 500 1.17 1.50 1.13 2.75 1.17 .560 1.73 30 90424 350 350-350 1/0-4 350-4 900C 650 1.66 1.68 1.48 2.99 1.50 .696 1.93 12 90426 500 500-500 400-2 500-2 900C 825 1.95 2.10 1.70 3.29 1.71 .850 2.30 12 Each Aluminum Parallel Groove Clamps Manufactured of extruded aluminum alloy thermically treated, this clamp offers high electrical conductibility, high strength and corrosion resistance The set screw, lock washer and nut is hot dip galvanized All sizes are packed in plastic bags and filled with antioxidant compound FIGURE 3 FIGURE 1 FIGURE 2 Main Tap Inches Cat No. Figure 96012 96016 1 1 CU-AL 10-1/0 10-2/0 ACSR 6-1/0 6-1/0 Wire Diameter .102-.398 .098-.417 96020 1 1/0-4/0 1/0-4/0 .373-.563 8-1/0 6-1/0 .128-.398 1.97 1.89 1.46 1.50 .394 50 96022 2 1/0-4/0 1/0-4/0 .373-.563 8-1/0 6-1/0 .128-.398 1.97 1.89 2.91 1.50 .394 25 96024 1 1/0-397.5 1/0-336.4 .373-.720 6-2/0 6-1/0 .162-.417 2.36 2.24 1.67 1.67 .394 50 96026 2 1/0-397.5 1/0-336.4 .373-.720 6-2/0 6-1/0 .162-.417 2.36 2.24 2.91 1.67 .394 25 96028 1 397.5-400 397.5 .728-.740 397.5-400 397.5 .728-.740 2.36 2.56 1.57 1.97 .472 50 96030 2 397.5-400 397.5 .728-.740 397.5-400 397.5 .728-.740 2.36 2.56 3.15 1.97 .472 25 96032 3 397.5-400 397.5 .728-.740 397.5-400 397.5 .728-.740 2.36 2.56 4.61 1.97 .472 15 Cu-AL 10-2 10-2/0 ACSR 6-2 6-1/0 Wire Diameter A .102-.325 1.50 .098-.417 1.50 B 1.50 1.50 C 1.24 1.24 D 1.14 1.14 Box Qty E .394 50 .394 50 Each 29 POWER CONNECTORS Heavy Duty Ground Rod Clamps Cast of high strength copper alloy containing 80% or more Copper Silicon Bronze Bolt Designed to maintain proper contact and alignment between ground wire and rod Approved for direct burial in soil & concrete Direct Burial marked on clamps DIRECT BURIAL UL467 Dimensions in inches A B .50 1.24 Cat No. 90634 Rod Diameter 1/2" Wire Range 2-10 Screw Thread 5/16-18 Box Qty 50 90636 5/8” 1/0-10 3/8-16 .59 1.46 50 90638 3/4” 1-10 3/8-16 .59 1.51 50 90639 3/8, 1/2, 5/8, 3/4 1/0-10 3/8-16 .59 2.38 50 Each Heavy Duty Ground Clamp DIRECT BURIAL UL467 Manufactured from cast copper alloy Supplied with stainless steel screws Suitable for direct burial in earth & concrete Provides maximum conductivity & strength Used to connect grounding conductor to water pipe, ground rods, copper water tubing or rebar up to 1” in diameter Can handle just about any size ground wire & just about any application Will accommodate ground wires 8 Awg to 4/0 Awg Direct Burial marked on clamps Cat No. Water Pipe Range Rebar Range 91610 1/2 - 1 3/8” - 1” Wire Range Min Max 8 STR 4/0 STR Box Qty Each 25 Flexible Braid Jumper Straps Manufactured from high conductive flat, extra flexible tinned copper braid flattened into a rectangular shape for greater flexibility To provide appropriate contact surface, ferrules formed on either ends are made from pure electrolytic copper & tin plated Used wherever it is necessary to take up expansion, allow for misalignment or take up vibration between moving parts of current carrying leads of equipment Prevent breakage of insulators, bushings or equipment due to misalignment during settling of substation foundations Cat No. Length 91620 12” Amp Rating Indoor Outdoor 330 400 Approximate Circular Mils Thickness Pad Hole Size Box Qty 154,500 1/4” 1-1/2 X 9/16 10 Each Flexible Ground Braids Manufactured from high conductivity, woven process Annealed, tinned copper wire Used for shield & lead-sheath grounding Provides maximum flexibility for connection Cat No. 91630 91640 30 Width 3/8” 1/2” Length 100’ 100’ Equivalent AWG Size 9 AWG 6 AWG Box Qty 10 10 Each POWER CONNECTORS Direct Burial Lay-in Connectors For Copper Conductors 90572 ideal for grounding Swimming Pools, 90573 ideal for Solar applications Designed for use on Conduit Grounding Bushings Open faced design allows installer to quickly lay-in the grounding conductor as a jumper to multiple conduits with no break in the ground conductor Made of copper material, Stainless Steel Screw For copper conductors Direct Burial marked on clamps UL467D LISTED 90573 90572 DIRECT BURIAL Dimensions = Inches Cat No. 90572 90573 Type Dipped Tin Plated Awg 4 4 Wire Range 4 – 14 4 – 14 Length 0.78 0.78 Width 0.38 0.38 Height 1.08 1.08 Bolt 0.26 0.26 Box Qty Each 100 100 Aluminum Lay-in Connectors For Copper & Aluminum Conductors Designed for use on Conduit Grounding Bushings Open face design allows installer to quickly lay-in the grounding conductor as a jumper to multiple conduits with no break in the ground conductor Excellent for tapping off main conductor without cutting due to lay in feature Manufactured from high strength 6061-T6 aluminum alloy to insure both maximum strength and conductivity Dual rated for both copper and aluminum conductors Electro tin plated to provide low contact resistance and protection against corrosion UL486B LISTED Dimensions = Inches Cat No. 90574 90575 90576 90580 Awg 4 1/0 3/0 250 Wire Range 4 – 14 1/0 - 14 3/0 - 6 250 - 6 Length 1.08 1.50 2.00 2.20 Width .380 .593 .800 .800 Height .78 1.17 1.56 1.79 Bolt 0.26 0.26 0.33 0.33 Box Qty 100 50 50 25 Each Ground Lay-in Rebar Clamp DIRECT BURIAL UL467 Manufactured from cast copper alloy Supplied with stainless steel screws Suitable for direct burial in earth & concrete Used to connect grounding conductors to water pipes, ground rods, copper water tubing or rebar Provides maximum conductivity & strength Direct Burial marked on clamps Cat No. Water Pipe Range Rebar Range Splice Wire Range 91652 1/2 - 1” 3/8 – 1” 8 SOL - 8 SOL Wire Range Min Max 10 SOL 2 STR Box Qty Each 25 Heavy Duty Lay-In Ground Clamp DIRECT BURIAL UL467 Cat No. 91654 The ultimate ground clamp for large ground wires Can handle just about any size ground wire & just about any application The lay-in feature provides for the ultimate in flexibility Manufactured from cast copper alloy, Direct Burial marked on clamps Supplied with stainless steel screws Suitable for direct burial in earth & concrete Provides maximum conductivity & strength Used to connect grounding conductor to water pipe, ground rods, copper water tubing or rebar up to 1” in diameter Water Pipe Range 1/2 - 1 Rebar Range 3/8” - 1” Wire Range Min Max 8 STR 4/0 STR Box Qty 25 Each 31 POWER CONNECTORS Ground Pipe Clamps Cast of high strength, high conductivity copper alloy For connecting grounding conductors to water pipe, copper tubing or ground rod #90627 and 90628 non-direct burial clamp has steel screws plated for corrosion resistance #90629, 90630 & 90631 UL Direct Burial ground pipe clamps have screws made of copper and are UL listed for direct burial in earth or concrete #90631 UL Direct Burial designed for copper-to-rebar connections & commonly used for Swimming Pools/Spas & Agricultural/Livestock buildings Dimensions in inches Cat No. Water Pipe Wire Range 90627 90628 1/2” - 1” 1-1/4” - 2” 2-10 2-10 90629 90630 1/2” - 1” 1-1/4” - 2” 2-10 2-10 Screw Thread Size A B Box Qty 2.25 3.54 1.64 2.48 50 50 1.64 2.48 25 15 Each Ground Pipe Clamps 1/4-20 5/16-18 Ground Pipe Clamps for Direct Burial 1/4-20 5/16-18 2.25 3.54 Ground Pipe Clamps for Rebar & Direct Burial 90631 1/2” - 1” 2-10 1/4-20 2.25 1.64 25 Ground Pipe Clamps with Adaptor Serrations Ground clamp has serrations that would match the serration of the adapter when mounted on it Manufactured from cast copper alloy Supplied with steel screws, plated for corrosion resistance Provides maximum conductivity & strength Used to connect copper grounding conductor to water pipe, ground rod & copper heater tubing Cat No. Water Pipe Range 91660 91662 1/2” - 1” 1-1/4” - 2” Wire Range Min Max 10 SOL 2 STR 10 SOL 2 STR 91664 2-1/4” - 4” 10 SOL 2 STR 25 91666 4-1/2” - 6” 10 SOL 2 STR 25 Box Qty Each 25 25 Aluminum Ground Clamps Manufactured from high strength aluminum alloy Can be reversed to accept smaller diameter ground rods Tin plated for low contact resistance, and corrosion protection Dual rated for copper or aluminum wire For connecting copper or aluminum conductor to water pipe, ground rod, copper water pipe, galvanized pipe or steel conduit Wire Range 32 Screw Size Cat No. Water Pipe Range Min Max Top Side Box Qty 90633 1/2” - 1” 14 1/0 7/16” x .55 1/4” x 1.50 25 Each POWER CONNECTORS Ground Clamp for Rigid Conduit For bonding ground wires to water pipe Cast from high strength plated steel hardware Manufactured from cast copper alloy Steel screws, Zinc plated Suitable to connect grounding conductor in rigid conduit to water pipe ground rod & copper weld tubing Hub swings 360o for easy alignment Water Conduit Cat No. Pipe Range size 90601 90602 90603 90604 90605 90606 1/2” - 1” 1/2” - 1” 1/2” - 1” 1-1/4” - 2” 1-1/4” - 2” 1-1/4” - 2” 1/2” 3/4” 1” 1/2” 3/4” 1” Conductor Min Max 10 2 10 2 10 2 10 2 10 2 10 2 Top Side Screw Size Screw Size 1/4 x .63 1/4 x .63 1/4 x .63 5/16 x .73 5/16 x .73 5/16 x .73 1/4 x 1.50 1/4 x 1.50 1/4 x 1.50 5/16 x 2.25 5/16 x 2.25 5/16 x 2.25 Box Qty Each 25 25 25 15 15 15 Ground Clamps for Armored or Unarmored Wire Manufactured from cast copper alloy Supplied with steel screws, plated for corrosion resistance Special pressure bar grips cable insulation to decrease chances of grounding conductors being pulled out Provides maximum conductivity & strength Used to connect armored or unarmored wire to water pipe for grounding Cat No. Water Pipe Range 91670 91672 1/2” - 1” 1-1/4” - 2” Wire Range Min Max 8 SOL 4 STR 8 SOL 4 STR Box Qty Each 25 25 Ground Clamps for Armored or Unarmored Wires Manufactured from cast copper alloy Supplied with steel screws, plated for corrosion resistance Special pressure bar grips cable insulation to decrease chances of grounding conductors being pulled out Pressure bar swings 360o for easy alignment Provides maximum conductivity & strength Used to connect armored or unarmored wire to water pipe for grounding Cat No. 91680 91682 Water Pipe Range 1/2” - 1” 1-1/4” - 2” Wire Range Min Max 10 SOL 6 SOL 10 SOL 6 SOL Box Qty 25 25 Each Ground Clamps with Adaptor for Armored or Unarmored Adaptors have serrations that match the serration of ground clamp Manufactured from cast copper alloy Supplied with steel screws, plated for corrosion resistance Provides maximum conductivity & strength Used to connect armored or unarmored wire to water pipe for grounding Wire Range Min Max 8 STR 4/0 STR Cat No. 91690 Water Pipe Range 1/2” - 1” Box Qty 25 91692 1-1/4” - 2” 8 STR 4/0 STR 25 91694 2-1/4” - 4” 8 STR 4/0 STR 15 91696 4-1/2” - 6” 8 STR 4/0 STR 15 Each 33 WIRE MANAGEMENT Terminal Strips .55 .94 .50 .42 1.34 Terminal Strips are popular to eliminate splicing High density circuitry can be attained to conserve space Rated: 30A UL 300VAC CSA 600VAC .562” Center Spacing Insulation Withstands Voltage: AC 2000V/min Insulation Resistance: 1000M or More at DC500V Using Temperature Range: -40OF to 248oF (-40OC to 120OC) Screw Torque Value: 18 Kg-cm Wire Range Awg: 12-18 Str Insulator Body: Plastic Nylon 66 (UL 94V-0) Brass Tin Plated Terminals 0.8t Terminal Screws: M4 Nickel plated Brass .39 .67 .20 Measurement = inches 34 Cat No. Poles A B Header Card - 2 Pack Pkg Qty 22122 22123 22124 22126 22128 22130 22132 2 3 4 6 8 10 12 1.65” 2.20” 2.76” 3.86” 4.96” 6.06” 7.17” 2.05” 2.60” 3.15” 4.25” 5.35” 6.46” 7.56” 2 2 2 2 2 2 2 22022 22023 22024 22026 22028 22030 22032 2 3 4 6 8 10 12 Bag - 10 Pack 1.65” 2.20” 2.76” 3.86” 4.96” 6.06” 7.17” 2.05” 2.60” 3.15” 4.25” 5.35” 6.46” 7.56” 10 10 10 10 10 10 10 Each Strip WIRE MANAGEMENT Terminal Blocks Touchproof Recessed screws and tubular contacts provide added safety and helps prevent short circuits Tubular contacts connect stripped, un-terminated solid or stranded wire directly to each contact Integrated stainless steel spring wire protectors prevent twisting and breakage of stranded wire during connection Modular 12-circuit design can be cut into smaller sections, or stacked end-to-end Dead front design to prevent shorts Rugged nylon 66 housing, UL 94V2 Operating temperature rated at 230oF(110oC) Brass metal alloy, nickel plated terminal insert Zinc plated, yellow chromed screws Can be used for AC & DC Measurement = inches Cat No. Amp Volts Wire Range A B C D E F Bag Qty Each Block Header Card - 2 Pack 22152 20 300 22-12 3.79 .669 .570 .315 .114 .110 2 22154 30 300 22-10 Sol 22-12 Str 4.62 .795 .670 .394 .142 .134 2 22156 35 300 22-10 5.54 .937 .748 .472 .154 .154 2 22158 50 300 20-8 6.22 1.008 .992 .531 .173 .189 2 Bag - 10 Pack 22052 20 300 22-12 3.79 .669 .570 .315 .114 .110 10 22054 30 300 22-10 Sol 22-12 Str 4.62 .795 .670 .394 .142 .134 10 22056 35 300 22-10 5.54 .937 .748 .472 .154 .154 10 22058 50 300 20-8 6.22 1.008 .992 .531 .173 .189 10 35 WIRE MANAGEMENT Pre-Insulated Crimp Connectors Nylon insulated copper tube sleeve 221oF (105OC) rated Use in light fixtures, appliances and other electrical OEM applications, holds wires firmly even amidst vibration Compact design fits easily into tight locations Flared skirt protects against turned back strands Beveled opening eases wire entry Simply twist conductors together and crimp Rugged, yet resilient insulator Cat No. Wire Range A B C D E Bag Qty Master Bag Qty Per 100 Hanging Bag 25 Pack 22100 22102 22104 22106 No.22 Thru 18 Awg No.22 Thru 14 Awg No.22 Thru 10 Awg No.16 Thru 10 Awg .102 .118 .157 .209 .244 .311 .413 .488 22000 22002 22004 22006 No.22 Thru 18 Awg No.22 Thru 14 Awg No.22 Thru 10 Awg No.16 Thru 10 Awg .102 .118 .157 .209 .244 .311 .413 .488 .307 .374 .492 .575 .244 .283 .378 .472 .709 .776 1.004 1.091 25 25 25 25 100 100 100 100 100 100 100 100 1000 1000 1000 1000 Bagged 100 Pack .307 .374 .492 .575 .244 .283 .378 .472 .709 .776 1.004 1.091 High Temperature 150OF Bagged 100 Pack 22007 22008 No.22 Thru 14 Awg No.22 Thru 10 Awg .118 .157 .311 .413 .374 .492 .283 .378 .776 1.004 25 25 100 100 Insulation Displacement Connectors (IDC) Telecommunications Splicing IDC connectors create fast splice and tap on solid copper wires Corrosion resistant gel sealant to protect connection Designed for low voltage telecommunication cables Quick, easy one-step splicing Moisture-resistant sealant protects wires from corrosion 10752 UB 2 port 10754 UR 3 port 10756 UY 2 port Use with solid copper single-conductor wire UB permits tapping into existing conductors without service interruption UR cut into service lines in ready-access cases for pedestal mounts & pigtail joints on cable splices or tapping into load coils such as toll cable splicing UY designed for straight splicing Cat No. Description Color Wire Range Insulation W L H Bag Qty Master Bag Qty 10752 10754 10756 2-Port tap Splice IDC 3-Port Butt Splice IDC 2-Port Butt Splice IDC Blue Red Yellow 22-26 19-26 22-26 .050” .066” .060” .379” .475” .340” .326” .762” .475” .24” .23” .23” 25 25 25 100 100 100 Per 100 Quick Splice Connectors MAXIMUM ELECTRIC CURRENT: 22-18 AWG: 10 AMPERE 18-14 AWG: 15 AMPERE 12-10 AWG: 24 AMPERE MAXIMUM ELECTRIC RATING: 600 VOLTS MAX. 302OF (150oC) INSULATION MATERIAL: P.P. TERMINAL MATERIAL: BRASS Pre-insulated tap connector splices into wire Used for quick connections with no wire stripping Simply insert both wires, squeeze down the metal insert with a plier and snap the cover into place 36 Cat No. Color Wire Range W L Bag Qty Master Bag Qty 10772 10774 10776 Red Blue Yellow 22-18 18-14 12-10 .787” .787” .807” 1.063” 1.063” 1.358” 25 25 25 100 100 100 Per 100 WIRE MANAGEMENT Wire & Wing Connectors Packaging Bag 25 Pack Boxed 100 Pack Bulk 500 Pack Small Jar Large Jar Combo Handy Pack Wire & Wing Connectors 4 Different sizes of connectors in a Handy Pack Contains the following : Qty 90 Connectors 60 Connectors 40 Connectors 40 Connectors Product Number 23073 23074 23076 23085 Contains the following : Qty Product Number Description 90 Connectors 23073 Orange Wire Connector 50 Connectors 23084 Yellow Twisted Wing Connector 40 Connectors 23085 Tan Twisted Wing Connector 30 Connectors 23086 Red Twisted Wing Connector Description Orange Wire Connector Yellow Wire Connector Red Wire Connector Tan Twisted Wing Connector Cat No. Handy Packs Per Case 23512 16 Per Handy Pack Cat No. Handy Packs Per Case 23514 16 Per Handy Pack Contains the following : Qty 90 Connectors 60 Connectors 60 Connectors 40 Connectors Product Number Description 23073 Orange Wire Connector 23074 Yellow Wire Connector 23054 Yellow Easy Cap Wire Connector 23056 Red Easy Cap Wire Connector Cat No. Handy Packs Per Case 23516 16 Per Handy Pack 37 WIRE MANAGEMENT Screw-On Wire Connectors Flame retardant thermoplastic shell provides excellent electrical insulation Fixed, precise wire spring Sure-grip ribs improves gripping ability and comfort Deep skirt entry provides protection from flashover and shorts Six Threaded, funnel entry guides wire into the connector easily color-coded models cover a full range of wire sizes from 22 through 8 Awg Ribbed-Cap provides a more secure grip and faster fingertip starts even when hands become slippery O o Temperature rated at 221 F (105 C) maximum No pre-twisting of conductors is required – spring creates its own thread Reusable connector threads on or off splice for fast and easy circuit changes and additions Tough, UL 94V-2 Flame retardant shell will not crack or break, even when applied to maximum wire combinations under extreme pressure 38 WIRE MANAGEMENT Screw-On Wire Connectors No. Type Color Wire Combinations Max Volts C D E Qty Case Qty 23271 P1 Gray No.22 Thru 14 Awg 300V .150 .264 .339 .228 .598 25 1250 23272 P2 Blue No.22 Thru 14 Awg 300V .161 .276 .386 .232 .693 25 1250 23273 P3 Orange No.22 Thru 14 Awg 600V .197 .390 .480 .307 .862 25 1250 23274 P4 Yellow No. 22 Thru 10 Awg 600V .236 .441 .551 .311 .937 25 1250 23276 P6 Red No. 22 Thru 8 Awg 600V 1000V fixtures & signs .276 .504 .630 .350 1.047 25 1250 23071 P1 Gray No.22 Thru 14 Awg 300V .150 .264 .339 .228 .598 100 10,000 23072 P2 Blue No.22 Thru 14 Awg 300V .161 .276 .386 .232 .693 100 10,000 23073 P3 Orange No.22 Thru 14 Awg 600V .197 .390 .480 .307 .862 100 10,000 23074 P4 Yellow No. 22 Thru 10 Awg 600V .236 .441 .551 .311 .937 100 6,000 23076 P6 Red No. 22 Thru 8 Awg 600V 1000V fixtures & signs .276 .504 .630 .350 1.047 100 3600 23171 P1 Gray No.22 Thru 14 Awg 300V .150 .264 .339 .228 .598 1000 20,000 23172 P2 Blue No.22 Thru 14 Awg 300V .161 .276 .386 .232 .693 1000 10,000 23173 P3 Orange No.22 Thru 14 Awg 600V .197 .390 .480 .307 .862 500 10,000 23174 P4 Yellow No. 22 Thru 10 Awg 600V .236 .441 .551 .311 .937 500 5,000 23176 P6 Red No. 22 Thru 8 Awg 600V 1000V fixtures & signs .276 .504 .630 .350 1.047 500 5,000 A B Per 100 Hanging Bag 25 Pack Boxed 100 Pack Bagged Bulk Pack Per Jar Small Jar 23373 23374 P3 P4 Orange Yellow No.22 Thru 14 Awg No.22 Thru 10 Awg 600V 600V .197 .236 .390 .441 .480 .551 .307 .311 .862 .937 350 250 11,200 8,000 23376 P6 Red No. 22 Thru 8 Awg 600V 1000V fixtures & signs .276 .504 .630 .350 1.047 150 4,800 Per Jar Large Jar 23473 23474 P3 P4 Orange Yellow No.22 Thru 14 Awg No.22 Thru 10 Awg 600V 600V .197 .236 .390 .441 .480 .551 .307 .311 .862 .937 900 600 10,800 7,200 23476 P6 Red No. 22 Thru 8 Awg 600V 1000V fixtures & signs .276 .504 .630 .350 1.047 400 4,800 Per Pack Handy Pack 23573 23574 P3 P4 Orange Yellow No.22 Thru 14 Awg No.22 Thru 10 Awg 600V 600V .197 .236 .390 .441 .480 .551 .307 .311 .862 .937 350 250 5600 4000 23576 P6 Red No. 22 Thru 8 Awg 600V 1000V fixtures & signs .276 .504 .630 .350 1.047 180 2880 39 WIRE MANAGEMENT Twisted Winged Connectors Flame retardant thermoplastic shell provides excellent electrical insulation Swept-back wing design fits into your fingers naturally and provides finger-tip comfort which allows for increased torquing power Square spots on the surface of connector provide more grasp and reduce slip through your fingers Color Square wire spring provides more securely gripping on conductors Deep skirt entry provides protection from flashover and shorts coded for easy identification Swept wing fits into your hand naturally to give extra torque leverage and reduce the effort required for connecting even large wire combinations, yet compact, with narrow profile to take up less space in junction boxes Ribbed-Cap provides more secure grip and faster fingertip starts even when hands become slippery O o Temperature rated at 221 F (105 C) maximum No pre-twisting of conductors is required – spring creates its own thread Reusable connector threads on or off splice for fast and easy circuit changes and additions Tough, UL 94V-2 Flame retardant shell will not crack or break, even when applied to maximum wire combinations under extreme pressure 40 WIRE MANAGEMENT Twisted Winged Connectors Max Volts No. Color Wire Combinations A 23284 Yellow No.18 Thru 10 Awg 23285 Tan No.22 Thru 8 Awg 23286 Red 23288 Gray No. 18 Thru 8 Awg Min. 3 No.16 No. 18 Thru 8 Awg 23290 Blue No. 14 Thru 6 Awg 23084 Yellow No.18 Thru 10 Awg 600V 1000V fixtures & signs .252 23085 Tan No.22 Thru 8 Awg 600V 1000V fixtures & signs 23086 Red No. 18 Thru 8 Awg 600V 1000V fixtures & signs B C D E Qty Case Qty Per 100 Hanging Bag Small Pack 600V 1000V fixtures & signs 600V 1000V fixtures & signs .252 .386 .717 .354 1.016 25 1250 .283 .457 .720 .362 1.142 25 1250 600V 1000V fixtures & signs 600V 1000V fixtures & signs 600V 1000V fixtures & signs .354 .531 .906 .378 1.252 25 1250 .394 .587 1.000 .394 1.311 6 1250 .472 .740 1.260 .516 1.575 6 1250 .386 .717 .354 1.016 100 6000 .283 .457 .720 .362 1.142 100 4800 .354 .531 .906 .378 1.252 100 3600 Boxed 100 Pack Bagged Bulk Pack 23184 Yellow No.18 Thru 10 AwgG 23185 Tan No.22 Thru 8 Awg 23186 Red 23188 Gray No. 18 Thru 8 Awg Min. 3 No.16 No. 18 Thru 8 Awg 23190 Blue No. 14 Thru 6 Awg 600V 1000V fixtures & signs 600V 1000V fixtures & signs 600V 1000V fixtures & signs 600V 1000V fixtures & signs 600V 1000V fixtures & signs .252 .386 .717 .354 1.016 500 5000 .283 .457 .720 .362 1.142 500 5000 .354 .531 .906 .378 1.252 500 5000 .394 .587 1.000 .394 1.311 100 2500 .472 .740 1.260 .516 1.575 100 1500 Per Jar Small Jar 23384 Yellow No.18 Thru 10 AwgG 600V 1000V fixtures & signs .252 .386 .717 .354 1.016 200 6400 23385 Tan No.22 Thru 8 Awg 600V 1000V fixtures & signs .283 .457 .720 .362 1.142 150 4800 23386 Red No. 18 Thru 8 Awg Min. 3 No.16 600V 1000V fixtures & signs .354 .531 .906 .378 1.252 100 3200 Per Jar Large Jar 23484 Yellow No.18 Thru 10 AwgG 600V 1000V fixtures & signs .252 .386 .717 .354 1.016 550 6600 23485 Tan No.22 Thru 8 Awg 600V 1000V fixtures & signs .283 .457 .720 .362 1.142 450 5400 23486 Red No. 18 Thru 8 Awg Min. 3 No.16 600V 1000V fixtures & signs .354 .531 .906 .378 1.252 300 3600 Per Pack Handy Pack 23584 Yellow No.18 Thru 10 AwgG 600V 1000V fixtures & signs .252 .386 .717 .354 1.016 250 4000 23585 Tan No.22 Thru 8 Awg 600V 1000V fixtures & signs .283 .457 .720 .362 1.142 200 3200 23586 Red No. 18 Thru 8 Awg Min. 3 No.16 600V 1000V fixtures & signs .354 .531 .906 .378 1.252 130 2080 41 WIRE MANAGEMENT Easy-Cap Wire Connectors Plastic cap molded by strong, durable UL94V-2 flame retardant thermoplastic Swept-back easy wings designed to provide firm & comfortable twisting Inserted with fixed square-wire spring, grabs wires quickly and firmly Color coded to industry standard Compact design perfect for tight spaces 600V, 1000 Volts Max. in lighting fixtures and signs No. Color Wire Combinations 23254 23256 Yellow Red No.10 Thru 22 Awg No.6 Thru 22 Awg 23054 23056 Yellow Red No.10 Thru 22 Awg No.6 Thru 22 Awg .287 .358 23154 23156 Yellow Red No.10 Thru 22 Awg No.6 Thru 22 Awg .287 .358 A D E Qty Case Qty .417 .453 .992 1.161 25 25 1250 1250 .492 .583 .417 .453 .992 1.161 100 100 6000 4800 .492 .583 .417 .453 .992 1.161 500 500 5000 5000 B C Per 100 Hanging Bag 25 Pack .287 .358 .429 .520 .492 .583 Boxed 100 Pack .429 .520 Bulk 500 Pack .429 .520 Per Jar Small Jar 23354 23356 Yellow Red No.10 Thru 22 Awg No.6 Thru 22 Awg .287 .358 .429 .520 .492 .583 .417 .453 .992 1.161 250 100 8000 3200 Per Jar Large Jar 23454 23456 Yellow Red No.10 Thru 22 Awg No.6 Thru 22 Awg .287 .358 .429 .520 .492 .583 .417 .453 .992 1.161 600 400 7200 4800 Per Pack Handy Pack 23554 23556 Yellow Red No.10 Thru 22 Awg No.6 Thru 22 Awg .287 .358 .429 .520 .492 .583 .417 .453 .992 1.161 250 170 4000 2720 High Temperature Wire Connectors Black, thermoplastic shell specially designed to withstand the extreme heat build-up commonly found in high-wattage light fixture and signs, 302OF (150oC) No. Type Wire Combinations 23161 P1 No.22 Thru 16 Awg 23163 P3 No.22 Thru 14 Awg Max Volts 300V A B C D E Bag Qty Case Box Per 100 .15 .264 .339 .228 .598 100 20,000 600V .197 .390 .480 .307 .866 1000V fixtures & Signs 100 5000 Grounding Connectors Color coded Green for quick identification as grounding connector Specifically designed for making positive ground connections and bonding non-metallic sheathed cable Live action square spring draws wires deep into spring for safe, tight grip and making a strong connection Built-in swept-back designed wing enables users to tighten connectors easily without tools 42 No. Color Wire Combinations A B C D E 23292 23192 Green Green No.14 Thru 10 Awg No.14 Thru 10 Awg .327 .327 .476 .476 .795 .795 .370 .370 1.134 1.134 Bag Qty Case Qty Per 100 25 100 5000 5000 WIRE MANAGEMENT Push-In Wire Connectors No Twisting! Just Push-in! Quick & Safe! Reduce Installation Easy for installation: 1. TURN OFF POWER. Strip wire approximately 0.45 inches. The stripping length is built on the connector. 2. Push the stripped solid conductor fully into the port of connector. No more twisting or taping. 3. Use a voltage tester to test your connection via the port on the connector 4. Applications: OEM lighting manufacturing Junction boxes Control Panels Security/Alarm systems Prefabricated wiring systems Lighting Retrofit To correct or change wires, simply hold the wire to be removed firmly, then twist alternating left and right while pulling on the connector. Easy to Install - instead of twisting or taping, simply push wires into contact to save you time and money Low wire insertion force needed allows fast, easy connections No-twist connection reduces repetitive motion fatigue Re-useable making changes easy and reducing waste of connectors Clear housing for connection confirmation Check port for continuity testing Electrolytic tin-plated internal copper bus for high conductivity Housing material: Thermoplastic, UL 94V2 flame retardant Current: 24A (VDE) Voltage: UL-600V, VDE-450V Working Temperature: 230OF (110oC) Wire Range: 12-22 AWG Solid conductor Color Coded according to different position UL listed copper to copper No. Poles Color L W H Qty Case Qty Per 100 Hanging Bag 25 Pack 23222 2 Red .768 .413 .374 25 1250 23223 3 Orange .776 .531 .374 25 1250 23224 4 Yellow .776 .677 .374 25 1250 23225 5 Gray .776 .831 .374 25 1250 23228 8 Black .748 .689 .661 25 1250 23012 2 Red .768 .413 .374 100 10,000 23013 3 Orange .776 .531 .374 100 6,000 23014 4 Yellow .776 .677 .374 100 6,000 23015 5 Gray .776 .831 .374 100 6,000 23018 8 Black .748 .689 .661 50 3,000 23022 2 Red .768 .413 .374 100 5,000 23023 3 Orange .776 .531 .374 100 5,000 23024 4 Yellow .776 .677 .374 100 5,000 23025 5 Gray .776 .831 .374 100 5,000 23028 8 Black .748 .689 .661 100 2,500 Boxed 100 Pack Bagged 100 Pack 43 WIRE MANAGEMENT Easy entry expanded insulation eliminates strand “Hang Up” increasing crimping rates and provides mechanical strain relief Serrated Barrel provides excellent electrical contact & resistance to pullout forces Vinyl terminals have butted seams Brazed seam on our Nylon & Non-Insulated terminals prevents splitting under maximum pressure Nylon insulated terminals provide superior chemical resistance and temperature characteristics for demanding applications Double Crimp Disconnects have an extended copper sleeve for multiple crimps Color Coded insulation for easy identification Manufactured from high strength copper alloy Electro-tin plated for corrosion resistance Wire range stamped on the surface for easy interpretation Packed in Zip Lock plastic bags with punched hole for pegboard hanging Ring Terminals – 25 PACK (100 Pack located on Page 49) Vinyl Insulated Electro Tin Plated Copper Expanded Insulation Serrated Barrel 105oC 600 Volts Max Measurements in Inches Cat No. Color Wire Size Stud Size d2 W F L E D d1 T Bag Qty Master Bag Qty 01012 01014 01016 01018 01032 01034 01036 01038 01040 01042 01062 01064 01066 01068 01070 Red Red Red Red Blue Blue Blue Blue Blue Blue Yellow Yellow Yellow Yellow Yellow 22-16 22-16 22-16 22-16 16-14 16-14 16-14 16-14 16-14 16-14 12-10 12-10 12-10 12-10 12-10 #6 #8 #10 1/4 #6 #8 #10 1/4 5/16 3/8 #8 #10 1/4 5/16 3/8 .146 .169 .209 .252 .146 .169 .209 .252 .331 .413 .169 .209 .252 .331 .413 .260 .315 .315 .457 .260 .335 .335 .472 .472 .535 .283 .374 .472 .591 .591 .248 .276 .276 .433 .248 .307 .307 .433 .433 .547 .240 .327 .413 .524 .524 .811 .866 .866 1.102 .823 .917 .917 1.114 1.114 1.260 .937 1.067 1.205 1.382 1.382 .441 .441 .441 .441 .453 .453 .453 .453 .453 .453 .555 .555 .555 .555 .555 .157 .157 .157 .157 .177 .177 .177 .177 .177 .177 .248 .248 .248 .248 .248 .067 .067 .067 .067 .091 .091 .091 .091 .091 .091 .134 .134 .134 .134 .134 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .039 .039 .039 .039 .039 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Spade Terminals - 25 PACK (100 Pack located on Page 53) Vinyl Insulated Electro Tin Plated Copper Expanded Insulation Serrated Barrel 105oC 600 Volts Max Measurements in Inches 44 Per 100 Cat No. Color Wire Size Stud Size d2 W F L E D d1 T Bag Qty Master Bag Qty 01112 01114 01116 01118 01132 01134 01136 01138 01162 01164 01166 01168 Red Red Red Red Blue Blue Blue Blue Yellow Yellow Yellow Yellow 22-16 22-16 22-16 22-16 16-14 16-14 16-14 16-14 12-10 12-10 12-10 12-10 #6 #8 #10 1/4 #6 #8 #10 1/4 #8 #10 1/4 5/16 .146 .169 .209 .252 .146 .169 .209 .252 .169 .209 .252 .331 .252 .252 .319 .472 .283 .311 .366 .472 .354 .354 .472 .551 .256 .256 .256 .433 .256 .256 .256 .433 .276 .276 .472 .413 .874 .874 .874 1.11 .886 .886 .886 1.110 1.047 1.1047 1.283 1.244 .441 .441 .441 .441 .453 .453 .453 .453 .555 .555 .555 .555 .157 .157 .157 .157 .177 .177 .177 .177 .248 .248 .248 .248 .067 .067 .067 .067 .091 .091 .091 .091 .134 .134 .134 .134 .030 .030 .030 .030 .031 .031 .031 .031 .039 .039 .039 .039 25 25 25 25 25 25 25 25 25 25 25 25 100 100 100 100 100 100 100 100 100 100 100 100 Per 100 WIRE MANAGEMENT Butt Connectors - 25 PACK (100 Pack located on Page 64) Vinyl Insulated Electro Tin Plated Copper Expanded Insulation 167OF (75oC) 600 Volts Max Measurements in Inches Cat No. 01182 01184 01186 Wire Size 22-16 16-14 12-10 Color Red Blue Yellow L .969 .969 1.043 D .157 .177 .248 Bag Qty 25 25 25 d1 .067 .091 .134 Male Disconnectors – 25 PACK Master Bag Qty 100 100 100 Per 100 (100 Pack located on Page 58) Vinyl Insulated Electro Tin Plated Brass Expanded Insulation Serrated Barrel 167OF (75oC) 300 Volts Max Measurements in Inches Cat No. Color Wire Size Tab Size W F L B C D T Bag Qty Master Bag Qty 01212 01214 Red Red 22-16 22-16 .020 X .187 .032 X .250 .189 .250 .256 .303 .748 .827 .394 .394 .067 .067 .157 .157 .020 .016 25 25 100 100 01222 Blue 16-14 .020 X .187 .189 .256 .748 .394 .091 .177 .020 25 100 01224 Blue 16-14 .032 X .250 .250 .303 .827 .394 .091 .177 .016 25 100 01232 Yellow 12-10 .032 X .250 .250 .303 .945 .512 .134 .217 .016 25 100 Female Disconnectors – 25 PACK (100 Pack located on Page 58) Vinyl Insulated Electro Tin Plated Brass Expanded Insulation Serrated Barrel 167OF (75oC) 300 Volts Max Measurements in Inches Cat No. Color Wire Size Tab Size W F L B C D T Bag Qty Master Bag Qty 01312 01314 01322 01324 01332 Red Red Blue Blue Yellow 22-16 22-16 16-14 16-14 12-10 .020 X .187 .032 X .250 .020 X .187 .032 X .250 .032 X .250 .197 .260 .197 .260 .260 .252 .295 .252 .295 .295 .748 .807 .748 .807 .925 .394 .394 .394 .394 .512 .067 .067 .091 .091 .134 .157 .157 .177 .177 .217 .014 .014 .014 .016 .016 25 25 25 25 25 100 100 100 100 100 Fully Insulated Disconnectors – 25 PACK Measurements in Inches Cat No. 01411 01412 01414 01415 01416 01418 Type Female Female Female Male Male Male Color Red Blue Yellow Red Blue Yellow Wire Size 22-16 16-14 12-10 22-16 16-14 12-10 Tab Size .032 X .250 .032 X .250 .032 X .250 .032 X .250 .032 X .250 .032 X .250 W .260 .260 .260 .250 .250 .250 F .295 .295 .295 .303 .303 .303 L .866 .866 .945 .906 .945 .984 Per 100 B .433 .433 .512 .433 .433 .512 Per 100 (100 Pack located on Page 60) Nylon Insulated Electro Tin Plated Brass Expanded Insulation Serrated Barrel 221OF (105oC) 300 Volts Max C .067 ..091 .134 .067 ..091 .134 D .157 .177 .248 .157 .177 .248 T .016 .016 .016 .016 .016 .016 Bag Master Qty bag Qty 25 100 25 100 25 100 25 100 25 100 25 100 Per 100 45 WIRE MANAGEMENT 200 Piece Terminal Kit Contains the following : High impact reusable plastic box Assortment of ring and spade terminals, butt connectors, male and female disconnects Qty Item ID Item Description 4 6 10034 10036 Ring Terminal 16-14 #8 Ring Terminal 16-14 #10 4 10 4 4 10062 10064 10066 10112 4 4 Qty Item ID Item Description Ring Terminal 12-10 #8 Ring Terminal 12-10 #10 Ring Terminal 12-10 1/4” Spade Terminal 22-18 #6 24 4 12 20 13 4 10164 10166 10182 10184 10186 10224 Spade Terminal 12-10 #10 Spade Terminal 12-10 1/4” Butt Connector 22-18 Butt Connector 16-14 Butt Connector 12-10 Male Disconnect 16-14 .250 10114 Spade Terminal 22-18 #8 4 10232 Male Disconnect 12-10 .250 10116 Spade Terminal 22-18 #10 5 10314 Female Disconnect 22-18 .250 4 10132 Spade Terminal 16-14 #6 5 10322 Female Disconnect 16-14 .187 11 10134 Spade Terminal 16-14 #8 10 10324 Female Disconnect 16-14 .250 12 10136 Spade Terminal 16-14 #10 10 10332 Female Disconnect 12-10 .250 10 10162 Spade Terminal 12-10 #8 8 10412 Female Insul Disconn 16-14 .250 4 10416 Male Insul Disconn 16-14 .250 Cat No. Kits/Case 10816 5 Per Kit Multi-Way Adapters Measurement = inches TERMINAL MATERIAL: Brass W L .156 .307 1.260 100 .250 .575 .787 100 3-WAY ADAPTER (2 MALE TAB) 600V 24A .250 .291 .709 CHAIR ADAPTER (2 MALE TAB) 600V 24A .250 CHAIR ADAPTER (3 MALE TAB) 600V 24A . .250 Description 10710 2-WAY BULLET RECEPTACLE 1050C 600V 10712 10714 10716 10718 46 Nema Tab Cat No. DOUBLE MALE TAB SINGLE FEMALE SLIP-ON 600V 24A Figure Bag Qty 100 .331 .827 100 .299 .827 100 Per 100 WIRE MANAGEMENT Non-Insulated Ring Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel MAXIMUM ELECTRIC RATING: 1500C 600V Measurement = inches Cat No. 11012 11014 11016 11018 11020 11022 11024 11026 11028 11030 11032 11034 11036 11038 11040 11042 11044 11046 11048 11050 11052 11054 11056 11058 11060 11062 11064 11066 Wire Size 22-16 22-16 22-16 22-16 22-16 22-16 22-16 22-16 22-16 22-16 22-16 16-14 16-14 16-14 16-14 16-14 16-14 16-14 16-14 16-14 16-14 16-14 12-10 12-10 12-10 12-10 12-10 12-10 Stud Size #4 #6 #8 #10 1/4 5/16 3/8 1/2 9/16 5/8 3/4 #4 #6 #8 #10 1/4 5/16 3/8 1/2 9/16 5/8 3/4 #6 #8 #10 1/4 5/16 3/8 d2 .126 .146 .169 .209 .252 .331 .413 .512 .591 .669 .827 .126 .146 .169 .209 .252 .331 .413 .512 .591 .669 .827 .146 .169 .209 .252 .331 .413 11068 11070 W .217 .260 .315 .315 .457 .457 .535 .756 1.063 1.063 1.063 .260 .260 .335 .335 .472 .472 .535 .756 1.063 1.063 1.063 .283 .283 .374 .472 .591 .591 F .197 .248 .276 .276 .433 .433 .547 .630 .827 .827 .827 .189 .248 .291 .291 .433 .433 .547 .630 .827 .827 .827 .240 .240 .327 .413 .524 .524 L .492 .567 .622 .622 .858 .858 1.004 1.197 1.547 1.547 1.547 .504 .567 .650 .650 .858 .858 1.004 1.197 1.547 1.547 1.547 .618 .618 .748 .886 1.063 1.063 E .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .236 .236 .236 .236 .236 .236 D .134 .134 .134 .134 .134 .134 .134 .134 .134 .134 .134 .161 .161 .161 .161 .161 .161 .161 .161 .161 .161 .161 .220 .220 .220 .220 .220 .220 d1 .067 .067 .067 .067 .067 .067 .067 .067 .067 .067 .067 .091 .091 .091 .091 .091 .091 .091 .091 .091 .091 .091 .134 .134 .134 .134 .134 .134 T .030 .030 .030 .030 .030 .030 .030 .030 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .039 .039 .039 .039 .039 .039 Bag Qty 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Master Bag Qty 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 12-10 1/2 12-10 9/16 .512 .756 .630 1.244 .236 .220 .134 .039 100 1000 .591 1.260 .992 1.858 .236 .220 .134 .039 100 11072 12-10 1000 5/8 .669 1.260 .992 1.858 .236 .220 .134 .039 100 1000 11074 12-10 3/4 .827 1.260 .992 1.858 .236 .220 .134 .039 100 1000 Per 100 47 WIRE MANAGEMENT Non-Insulated Ring Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 8 70 6 95 4 125 2 170 TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel MAXIMUM ELECTRIC RATING: 1500C 600V Measurement = inches 48 Cat No. Wire Size AWG Stud Size d2 W F L E D d1 T Bag Qty Master Bag Qty 11076 11078 11080 11082 11084 11086 11088 11090 11092 11094 11096 11098 8 8 8 8 8 8 8 6 6 6 6 6 #6 #8 #10 1/4 5/16 3/8 1/2 #8 #10 1/4 5/16 3/8 .146 .169 .209 .252 .331 .413 .512 .169 .209 .252 .331 .413 .315 .472 .472 .472 .591 .591 .787 .472 .472 .472 .630 .630 .366 .366 .366 .366 .543 .543 .591 .524 .524 .524 .559 .559 .846 .937 .937 .937 1.161 1.161 1.319 1.180 1.180 1.180 1.280 1.280 .335 .335 .335 .335 .335 .335 .335 .413 .413 .413 .413 .413 .283 .283 .283 .283 .283 .283 .283 .354 .354 .354 .354 .354 .177 .177 .177 .177 .177 .177 .177 .228 .228 .228 .228 .228 .047 .047 .047 .047 .047 .047 .047 .059 .059 .059 .059 .059 100 100 100 100 100 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 11100 6 7/16 .453 .866 .780 1.614 .413 .354 .228 .059 100 1000 11102 6 1/2 .512 .866 .780 1.614 .413 .354 .228 .059 100 1000 11104 4 #8 .169 .480 .594 1.307 .472 .453 .303 .067 100 1000 11106 4 #10 .209 .480 .594 1.307 .472 .453 .303 .067 100 1000 11108 4 1/4 .252 .480 .594 1.299 .472 .453 .303 .067 100 1000 11110 4 5/16 .331 .650 .531 1.319 .472 .453 .303 .067 100 1000 11112 4 3/8 .413 .650 .531 1.319 .472 .453 .303 .067 100 1000 11114 4 7/16 .453 .866 .776 1.673 .472 .453 .303 .067 100 1000 11116 4 1/2 .512 .866 .776 1.673 .472 .453 .303 .067 100 1000 11118 2 #10 .209 .602 .685 1.535 .551 .524 .370 .071 100 1000 11120 2 1/4 .252 .602 .685 1.535 .551 .524 .370 .071 100 1000 11122 2 5/16 .331 .602 .685 1.535 .551 .524 .370 .071 100 1000 11124 2 3/8 .413 .602 .685 1.535 .551 .524 .370 .071 100 1000 11126 2 7/16 .453 .866 .697 1.681 .551 .524 .370 .071 100 1000 11128 2 1/2 .512 .866 .697 1.681 .551 .524 .370 .071 100 1000 Per 100 WIRE MANAGEMENT Vinyl Insulated Ring Terminals (25 Pack located on Page 44) MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 105oC 600 Volts INSULATED MATERIAL: Vinyl TERMINAL MATERIAL: Electro Tin Plated Copper FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. 10010 10012 Wire Color Size AWG Red 22-16 Red 22-16 Stud Size #4 #6 d2 .126 .146 W .217 .260 F .197 .248 L .736 .811 E .441 .441 D .157 .157 d1 .067 .067 T .031 .031 Bag Qty 100 100 Master Bag Qty 1000 1000 10014 10016 Red Red 22-16 22-16 #8 #10 .169 .209 .315 .315 .276 .276 .866 .866 .441 .441 .157 .157 .067 .067 .031 .031 100 100 1000 1000 10018 10020 10022 Red Red Red 22-16 22-16 22-16 1/4 5/16 3/8 .252 .331 .413 .457 .457 .535 .433 .433 .547 1.102 1.102 1.248 .441 .441 .441 .157 .157 .157 .067 .067 .067 .031 .031 .031 100 100 100 1000 1000 1000 10023 10024 10026 Red Red Red 22-16 22-16 22-16 1/2 9/16 5/8 .512 .591 .669 .772 1.063 1.063 .630 .827 .827 1.441 1.791 1.791 .441 .441 .441 .157 .157 .157 .067 .067 .067 .031 .031 .031 100 100 100 1000 1000 1000 10028 10030 Red Blue 22-16 16-14 3/4 #4 .827 .126 1.063 .260 .827 .189 1.791 .760 .441 .453 .157 .177 .067 .091 .031 .031 100 100 1000 1000 10032 Blue 16-14 #6 .146 .260 .248 .823 .453 .177 .091 .031 100 1000 10034 10036 Blue Blue 16-14 16-14 #8 #10 .169 .209 .335 .335 .307 .307 .917 .917 .453 .453 .177 .177 .091 .091 .031 .031 100 100 1000 1000 10038 Blue 16-14 1/4 .252 .472 .433 1.114 .453 .177 .091 .031 100 1000 10040 Blue 16-14 5/16 .331 .472 .433 1.114 .453 .177 .091 .031 100 1000 10042 Blue 16-14 3/8 .413 .535 .547 1.260 .453 .177 .091 .031 100 1000 10044 Blue 16-14 1/2 .512 .756 .630 1.453 .453 .177 .091 .031 100 1000 10046 Blue 16-14 9/16 .591 1.063 .827 1.803 .453 .177 .091 .031 100 1000 10048 Blue 16-14 5/8 .669 1.063 .827 1.803 .453 .177 .091 .031 100 1000 10050 Blue 16-14 3/4 .827 1.063 .827 1.803 .453 .177 .091 .031 100 1000 10060 Yellow 12-10 #6 .146 .283 .240 .937 .555 .248 .134 .039 100 1000 10062 Yellow 12-10 #8 .169 .283 .240 .937 .555 .248 .134 .039 100 1000 10064 Yellow 12-10 #10 .209 .374 .327 1.024 .555 .248 .134 .039 100 1000 10066 Yellow 12-10 1/4 .252 .472 .413 1.205 .555 .248 .134 .039 100 1000 10068 Yellow 12-10 5/16 .331 .591 .524 1.382 .555 .248 .134 .039 100 1000 10070 Yellow 12-10 3/8 .413 .591 .524 1.382 .555 .248 .134 .039 100 1000 10072 Yellow 12-10 1/2 .512 .756 .630 1.563 .555 .248 .134 .039 100 1000 10074 Yellow 12-10 9/16 .591 1.260 .992 2.177 .555 .248 .134 .039 100 1000 10076 Yellow 12-10 5/8 .669 1.260 .992 2.177 .555 .248 .134 .039 100 1000 10078 Yellow 12-10 3/4 .827 1.260 .992 2.177 .555 .248 .134 .039 100 1000 Per 100 49 WIRE MANAGEMENT Nylon Insulated Ring Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches 50 Cat No. Color Wire Size AWG Stud Size d2 W F L E D d1 T Bag Qty Master Bag Qty 11312 11314 11316 Red Red Red 22-16 22-16 22-16 #4 #6 #8 .126 .146 .169 .216 .260 .315 .197 .248 .276 .728 .803 .858 .433 .433 .433 .157 .157 .157 .067 .067 .067 .030 .030 .030 100 100 100 1000 1000 1000 11318 Red 22-16 #10 .209 .315 .276 .858 .433 .157 .067 .030 100 1000 11320 11322 Red Red 22-16 22-16 1/4 5/16 .252 .331 .457 .457 .433 .433 1.094 1.094 .433 .433 .157 .157 .067 .067 .030 .030 100 100 1000 1000 11324 11326 11328 11330 11332 11334 Red Red Red Red Red Blue 22-16 22-16 22-16 22-16 22-16 16-14 3/8 1/2 9/16 5/8 3/4 #4 .413 .512 .591 .669 .827 .126 .535 .756 1.063 1.063 1.063 .260 .547 .630 .827 .827 .827 .189 1.240 1.433 1.783 1.783 1.783 .740 .433 .433 .433 .433 .433 .433 .157 .157 .157 .157 .157 .177 .067 .067 .067 .067 .067 .091 .030 .030 .031 .031 .031 .031 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 11336 11338 11340 Blue Blue Blue 16-14 16-14 16-14 #6 #8 #10 .146 .169 .209 .260 .335 .335 .248 .307 .307 .803 .898 .898 .433 .433 .433 .177 .177 .177 .091 .091 .091 .031 .031 .031 100 100 100 1000 1000 1000 11342 Blue 16-14 1/4 .252 .472 .433 1.094 .433 .177 .091 .031 100 1000 11344 Blue 16-14 5/16 .331 .472 .433 1.094 .433 .177 .091 .031 100 1000 11346 Blue 16-14 3/8 .413 .535 .547 1.240 .433 .177 .091 .031 100 1000 11348 Blue 16-14 1/2 .512 .756 .630 1.433 .433 .177 .091 .031 100 1000 11350 Blue 16-14 9/16 .591 1.063 .827 1.783 .433 .177 .091 .031 100 1000 11352 Blue 16-14 5/8 .669 1.063 .827 1.783 .433 .177 .091 .031 100 1000 11354 Blue 16-14 3/4 .827 1.063 .827 1.783 .433 .177 .091 .031 100 1000 11356 Yellow 12-10 #6 .146 .283 .240 .894 .512 .252 .134 .039 100 1000 11358 Yellow 12-10 #8 .169 .283 .240 .894 .512 .252 .134 .039 100 1000 11360 Yellow 12-10 #10 .209 .374 .329 1.024 .512 .252 .134 .039 100 1000 11362 Yellow 12-10 1/4 .252 .472 .413 1.161 .512 .252 .134 .039 100 1000 11364 Yellow 12-10 5/16 .331 .591 .524 1.339 .512 .252 .134 .039 100 1000 11366 Yellow 12-10 3/8 .413 .591 .524 1.339 .512 .252 .134 .039 100 1000 11368 Yellow 12-10 1/2 .512 .756 .630 1.520 .512 .252 .134 .039 100 1000 11370 Yellow 12-10 9/16 .591 1.260 .992 2.134 512 .252 .134 .039 100 1000 11372 Yellow 12-10 5/8 .669 1.260 .992 2.134 512 .252 .134 .039 100 1000 11374 Yellow 12-10 3/4 .827 1.260 .992 2.134 512 .252 .134 .039 100 1000 Per 100 WIRE MANAGEMENT Nylon Insulated Ring Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 8 70 6 95 4 125 2 170 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG Stud Size d2 W F L E D d1 T Bag Qty Master Bag Qty 11376 11378 Red Red 8 8 #6 #8 .146 .169 .315 .472 .366 .366 1.142 1.232 .630 .630 .315 .315 .177 .177 .047 .047 100 100 1000 1000 11380 11382 11384 11386 11388 11390 11392 11394 11396 11398 Red Red Red Red Red Blue Blue Blue Blue Blue 8 8 8 8 8 6 6 6 6 6 #10 1/4 5/16 3/8 1/2 #8 #10 1/4 5/16 3/8 .209 .252 .331 .413 .512 .169 .209 .252 .331 .413 .472 .472 .591 .591 .787 .472 .472 .472 .630 .630 .366 .366 .543 .543 .591 .524 .524 .524 .559 .559 1.232 1.232 1.469 1.469 1.614 1.606 1.606 1.606 1.713 1.713 .630 .630 .630 .630 .630 .846 .846 .846 .846 .846 .315 .315 .315 .315 .315 .433 .433 .433 .433 .433 .177 .177 .177 .177 .177 .228 .228 .228 .228 .228 .047 .047 .047 .047 .047 .059 .059 .059 .059 .059 100 100 100 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 11400 Blue 6 7/16 .453 .866 .780 2.047 .846 .433 .228 .059 100 1000 11402 Blue 6 1/2 .512 .866 .780 2.047 .846 .433 .228 .059 100 1000 11404 Yellow 4 #8 .169 .480 .594 1.780 .945 .512 .303 .067 100 1000 11406 Yellow 4 #10 .209 .480 .594 1.780 .945 .512 .303 .067 100 1000 11408 Yellow 4 1/4 .252 .480 .614 1.772 .945 .512 .303 .067 100 1000 11410 Yellow 4 5/16 .331 .650 .531 1.791 .945 .512 .303 .067 100 1000 11412 Yellow 4 3/8 .413 .650 .531 1.791 .945 .512 .303 .067 100 1000 11414 Yellow 4 7/16 .453 .866 .776 2.146 .945 .512 .303 .067 100 1000 11416 Yellow 4 1/2 .512 .866 .776 2.146 .945 .512 .303 .067 100 1000 11418 Red 2 #10 .209 .602 .685 2.047 1.063 .571 .370 .071 100 1000 11420 Red 2 1/4 .252 .602 .685 2.047 1.063 .571 .370 .071 100 1000 11422 Red 2 5/16 .331 .602 .685 2.047 1.063 .571 .370 .071 100 1000 11424 Red 2 3/8 .413 .602 .685 2.047 1.063 .571 .370 .071 100 1000 11426 Red 2 7/16 .453 .866 .697 2.193 1.063 .571 .370 .071 100 1000 11428 Red 2 1/2 .512 .866 .697 2.193 1.063 .571 .370 .071 100 1000 Per 100 51 WIRE MANAGEMENT Vinyl Insulated Multiple-Stud Ring Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 105oC 600 Volts INSULATED MATERIAL: Vinyl TERMINAL MATERIAL: Electro Tin Plated Copper FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. 11452 11454 11456 Color Wire Size AWG Stud Size d2 Red Red Red Blue Blue Blue Yellow Yellow Yellow 22-16 22-16 22-16 16-14 16-14 16-14 12-10 12-10 12-10 #6 #8 #10 #6 #8 #10 #6 #8 #10 .146 .169 .209 .146 .169 .209 .146 .169 .209 W F L E D d1 T Bag Qty Master Bag Qty .339 .311 1.012 .441 .157 .067 .030 100 1000 .339 .311 1.024 .453 .177 .091 .031 100 1000 .390 .350 1.205 .555 .248 .134 .039 100 1000 Per 100 Nylon Insulated Multiple-Stud Ring Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. 11462 11464 11466 52 Color Wire Size AWG Stud Size d2 Red Red Red Blue Blue Blue Yellow Yellow Yellow 22-16 22-16 22-16 16-14 16-14 16-14 12-10 12-10 12-10 #6 #8 #10 #6 #8 #10 #6 #8 #10 .146 .169 .209 .146 .169 .209 .146 .169 .209 W F L E D d1 T Bag Qty Master Bag Qty .339 .311 .996 .433 .157 .067 .030 100 1000 .339 .311 .996 .433 .177 .091 .031 100 1000 .390 .350 1.154 .512 .252 .134 .039 100 1000 Per 100 WIRE MANAGEMENT Non-Insulated Spade Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 8 70 6 95 TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel MAXIMUM ELECTRIC RATING: 1500C 600V Measurement = inches Cat No. Wire Size Stud Size d2 W F L E D d1 T Bag Qty Master Bag Qty 11512 11514 11516 11518 11520 11522 11524 11526 11528 11530 11532 11534 11536 11538 11540 11542 11544 11546 11548 22-16 22-16 22-16 22-16 22-16 16-14 16-14 16-14 16-14 16-14 12-10 12-10 12-10 12-10 12-10 8 8 6 6 #4 #6 #8 #10 1/4 #4 #6 #8 #10 1/4 #6 #8 #10 1/4 5/16 #10 1/4 1/4 5/16 .126 .146 .169 .209 .252 .126 .146 .169 .209 .252 .146 .169 .209 .252 .331 .209 .252 .252 .331 .323 .252 .319 .319 .472 .224 .283 .319 .366 .472 .327 .354 .354 .472 .551 .413 .425 .433 .543 .256 .256 .256 .256 .433 .256 .256 .256 .256 .433 .276 .276 .276 .472 .413 .319 .339 .421 .421 .630 .630 .630 .630 .866 .630 .630 .630 .630 .866 .728 .728 .728 .965 .925 .819 .886 1.004 1.122 .189 .189 .189 .189 .189 .189 .189 .189 .189 .189 .236 .236 .236 .236 .236 .335 .335 .413 .413 .134 .134 .134 .134 .134 .161 .161 .161 .161 .161 .220 .220 .220 .220 .220 .283 .283 .354 .354 .067 .067 .067 .067 .067 .091 .091 .091 .091 .091 .134 .134 .134 .134 .134 .177 .177 .228 .228 .030 .030 .030 .030 .030 .031 .031 .031 .031 .031 .039 .039 .039 .039 .039 .047 .047 .059 .059 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 Vinyl Insulated Spade Terminals Per 100 25 Pack located on Page 44) MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 Master Box Qty 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 Per 100 MAXIMUM ELECTRIC RATING: 105oC 600 Volts INSULATED MATERIAL: Vinyl TERMINAL MATERIAL: Electro Tin Plated Copper FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. 10110 10112 10114 10116 10118 10120 10132 10134 10136 10138 10140 10162 10164 10166 10168 Color Red Red Red Red Red Blue Blue Blue Blue Blue Yellow Yellow Yellow Yellow Yellow Wire Size 22-16 22-16 22-16 22-16 22-16 16-14 16-14 16-14 16-14 16-14 12-10 12-10 12-10 12-10 12-10 Stud Size #4 #6 #8 #10 1/4 #4 #6 #8 #10 1/4 #6 #8 #10 1/4 5/16 d2 .126 .146 .169 .209 .252 .126 .146 .169 .209 .252 .146 .169 .209 .252 .331 W .224 .252 .319 .319 .472 .224 .283 .311 .366 .472 .327 .354 .354 .472 .551 F .256 .256 .256 .256 .433 .256 .256 .256 .256 .433 .276 .276 .276 .472 .413 L .874 .874 .874 .874 1.110 .886 .886 .886 .886 1.122 1.047 1.047 1.047 1.283 1.244 E .441 .441 .441 .441 .441 .453 .453 .453 .453 .453 .555 .555 .555 .555 .555 D .157 .157 .157 .157 .157 .177 .177 .177 .177 .177 .248 .248 .248 .248 .248 d1 .067 .067 .067 .067 .067 .091 .091 .091 .091 .091 .134 .134 .134 .134 .134 T .030 .030 .030 .030 .030 .031 .031 .031 .031 .031 .039 .039 .039 .039 .039 Bag Qty 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 53 WIRE MANAGEMENT Nylon Insulated Spade Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 8 70 6 95 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG Stud Size d2 W F L E D d1 T Bag Qty Master Bag Qty 11612 11614 11616 11618 11620 11622 11624 11626 11628 11630 11632 11634 11636 11638 11640 11642 11644 11646 11648 Red Red Red Red Red Blue Blue Blue Blue Blue Yellow Yellow Yellow Yellow Yellow Red Red Blue Blue 22-16 22-16 22-16 22-16 22-16 16-14 16-14 16-14 16-14 16-14 12-10 12-10 12-10 12-10 12-10 8 8 6 6 #4 #6 #8 #10 1/4 #4 #6 #8 #10 1/4 #6 #8 #10 1/4 5/16 #10 1/4 1/4 5/16 .126 .146 .169 .209 .252 .126 .146 .169 .209 .252 .146 .169 .209 .252 .331 .209 .252 .252 .331 .224 .252 .319 .319 .472 .224 .283 .311 .366 .472 .327 .327 .354 .472 .551 .413 .425 .433 .543 .256 .256 .256 .256 .433 .256 .256 .256 .256 .433 .276 .276 .276 .472 .413 .319 .339 .421 .421 .866 .866 .866 .866 1.102 .866 .866 .866 .866 1.102 1.004 1.004 1.004 1.240 1.201 1.114 1.181 1.437 1.555 .433 .433 .433 .433 .433 .433 .433 .433 .433 .433 .512 .512 .512 .512 .512 .630 .630 .846 .846 .157 .157 .157 .157 .157 .177 .177 .177 .177 .177 .252 .252 .252 .252 .252 .315 .315 .433 .433 .067 .067 .067 .067 .067 .091 .091 .091 .091 .091 .134 .134 .134 .134 .134 .177 .177 .228 .228 .030 .030 .030 .030 .030 .031 .031 .031 .031 .031 .039 .039 .039 .039 .039 .047 .047 .059 .059 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 Per 100 Non-Insulated Locking Spade Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 8 70 6 95 TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel MAXIMUM ELECTRIC RATING: 1500C 600V Measurement = inches Cat No. 11662 11664 11666 11668 11670 11672 11674 11676 11678 11680 54 Wire Size AWG 22-16 22-16 22-16 16-14 16-14 16-14 12-10 12-10 12-10 12-10 Stud Size #6 #8 #10 #6 #8 #10 #6 #8 #10 1/4 d2 .146 .169 .209 .146 .169 .209 .146 .169 .209 .252 W .252 .319 .319 .236 .319 .366 .327 .327 .354 .472 F .256 .256 .256 .256 .256 .256 .276 .276 .276 .472 L .630 .630 .630 .630 .630 .630 .717 .717 .717 .965 E .189 .189 .189 .189 .189 .189 .236 .236 .236 .236 D .134 .134 .134 .161 .161 .161 .220 .220 .220 .220 d1 .067 .067 .067 .091 .091 .091 .134 .134 .134 .134 T .030 .030 .030 .031 .031 .031 .039 .039 .039 .039 Bag Qty 100 100 100 100 100 100 100 100 100 100 Master Bag Qty 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 Per 100 WIRE MANAGEMENT Vinyl Insulated Locking Spade Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Vinyl TERMINAL MATERIAL: Electro Tin Plated Copper FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. 11702 11704 11706 11708 11710 11712 11714 11716 11718 11720 Wire Color Size AWG Stud Size d2 W F L E D d1 T Bag Qty Master Bag Qty Red Red Red Blue Blue Blue Yellow Yellow Yellow Yellow #6 #8 #10 #6 #8 #10 #6 #8 #10 1/4 .146 .169 .209 .146 .169 .209 .146 .169 .209 .252 .252 .319 .319 .236 .319 .366 .327 .327 .354 .472 .256 .256 .256 .256 .256 .256 .276 .276 .276 .472 .874 .874 .874 .886 .886 .886 1.035 1.035 1.035 1.283 .874 .874 .874 .453 .453 .453 .555 .555 .555 .555 .134 .134 .134 .161 .161 .161 .248 .248 .248 .248 .067 .067 .067 .091 .091 .091 .134 .134 .134 .134 .030 .030 .030 .031 .031 .031 .039 .039 .039 .039 100 100 100 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 14 30 12 35 22-16 22-16 22-16 16-14 16-14 16-14 12-10 12-10 12-10 12-10 Per 100 Nylon Insulated Locking Spade Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 10 50 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Wire Color Size AWG Stud Size d2 W F L E D d1 T Bag Qty Master Bag Qty 11722 11724 11726 11728 11730 11732 11734 Red Red Red Blue Blue Blue Yellow 22-16 22-16 22-16 16-14 16-14 16-14 12-10 #6 #8 #10 #6 #8 #10 #6 .146 .169 .209 .146 .169 .209 .146 .252 .319 .319 .236 .319 .366 .327 .256 .256 .256 .256 .256 .256 .276 .866 .866 .866 .866 .866 .866 .992 .433 .433 .433 .433 .433 .433 .512 .134 .134 .134 .161 .161 .161 .252 .067 .067 .067 .091 .091 .091 .134 .030 .030 .030 .031 .031 .031 .039 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 11736 11738 11740 Yellow Yellow Yellow 12-10 12-10 12-10 #8 #10 1/4 .169 .209 .252 .327 .354 .472 .276 .276 .472 .992 .992 1.240 .512 .512 .512 .252 .252 .252 .134 .134 .134 .039 .039 .039 100 100 100 1000 1000 1000 Cat No. Per 100 55 WIRE MANAGEMENT Non-Insulated Flange Spade Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 TERMINAL MATERIAL: Electro Tin Plated Copper FEATURES: Brazed Seam Serrated Barrel MAXIMUM ELECTRIC RATING: 1500C 600V Measurement = inches Cat No. 11742 11744 11746 11748 11750 11752 11754 11756 11758 11760 Wire Size AWG 22-16 22-16 22-16 22-16 16-14 16-14 16-14 12-10 12-10 12-10 Stud Size #4 #6 #8 #10 #6 #8 #10 #6 #8 #10 d2 .126 .146 .169 .209 .146 .169 .209 .146 .169 .209 W .252 .252 .335 .295 .295 .315 .335 .299 .335 .299 F .201 .201 .283 .201 .205 .266 .283 .244 .295 .244 L .551 .551 .768 .551 .571 .728 .709 .728 .787 .728 E .189 .189 .189 .189 .189 .189 .189 .236 .236 .236 D .134 .134 .134 .134 .161 .161 .161 .220 .220 .220 d1 .067 .067 .067 .091 .091 .091 .134 .134 .134 .134 A .059 .059 .059 .059 .059 .059 .059 .059 .059 .059 Bag Qty 100 100 100 100 100 100 100 100 100 100 T .030 .030 .030 .030 .031 .031 .031 .039 .039 .039 Master Bag Qty 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 Per 100 Vinyl Insulated Flange Spade Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 V INSULATED MATERIAL: Vinyl TERMINAL MATERIAL: Electro Tin Plated Copper FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches 56 Cat No. Color Wire Size AWG Stud Size d2 W F L E D d1 A T Bag Qty Master Bag Qty 11762 11764 11766 11768 11770 11772 11774 Red Red Red Red Blue Blue Blue 22-16 22-16 22-16 22-16 16-14 16-14 16-14 #4 #6 #8 #10 #6 #8 #10 .126 .146 .169 .209 .146 .169 .209 .252 .252 .335 .295 .295 .315 .335 .201 .201 .283 .201 .205 .266 .283 .795 .795 1.012 .795 .827 .728 .965 .441 .441 .441 .441 .453 .453 .453 .157 .157 .157 .157 .177 .177 .177 .067 .067 .067 .067 .091 .091 .091 .059 .059 .059 .059 .059 .059 .059 .030 .030 .030 .030 .031 .031 .031 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 11776 11778 11780 Yellow Yellow Yellow 12-10 12-10 12-10 #6 #8 #10 .146 .169 .209 .299 .335 .299 .244 .295 .244 1.047 1.106 1.047 .555 .555 .555 .248 .248 .248 .134 .134 .134 .059 .059 .059 .039 .039 .039 100 100 100 1000 1000 1000 Per 100 WIRE MANAGEMENT Nylon Insulated Flange Spade Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG Stud Size d2 W F L E D d1 A T Bag Qty Master Bag Qty 11802 11804 11806 11808 11810 11812 11814 11816 11818 11820 Red Red Red Red Blue Blue Blue Yellow Yellow Yellow 22-16 22-16 22-16 22-16 16-14 16-14 16-14 12-10 12-10 12-10 #4 #6 #8 #10 #6 #8 #10 #6 #8 #10 .126 .146 .169 .209 .146 .169 .209 .146 .169 .209 .252 .252 .335 .295 .295 .315 .335 .299 .335 .299 .201 .201 .283 .201 .205 .266 .283 .244 .295 .244 .787 .787 1.004 .787 .807 .965 .945 1.004 1.063 1.004 .443 .443 .443 .443 .443 .443 .443 .512 .512 .512 .157 .157 .157 .157 .177 .177 .177 .252 .252 .252 .067 .067 .067 .067 .091 .091 .091 .134 .134 .134 .059 .059 .059 .059 .059 .059 .059 .059 .059 .059 .030 .030 .030 .030 .031 .031 .031 .039 .039 .039 100 100 100 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 Per 100 Non-Insulated Pin Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 TERMINAL MATERIAL: Electro Tin Plated Copper FEATURES: Brazed Seam Serrated Barrel MAXIMUM ELECTRIC RATING: 1500C 600V Measurement = inches Cat No. 11822 11824 11826 Wire Size AWG 22-16 16-14 12-10 W .075 .075 .110 F .472 .472 .551 L .661 .661 .787 E .189 .189 .236 D .134 .161 .220 d1 .067 .091 .134 Bag Qty 100 100 100 T .030 .031 .039 Master Bag Qty 1000 1000 1000 Per 100 Nylon Insulated Pin Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG W F L E D d1 T Bag Qty Master Bag Qty 11832 11834 11836 Red Blue Yellow 22-16 16-14 12-10 .075 .075 .110 .472 .472 .551 .898 .898 1.063 .433 .433 .512 .157 .177 .252 .067 .091 .134 .030 .031 .039 100 100 100 1000 1000 1000 Per 100 57 WIRE MANAGEMENT Vinyl Insulated Female Disconnects (25 Pack located on Page 45) MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 167OF (75oC) 300 Volts INSULATED MATERIAL: Vinyl TERMINAL MATERIAL: Electro Tin Plated Brass FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG NEMA TAB W F L B C D T Bag Qty Master Bag Qty 10308 10310 10312 10311 10313 10314 10316 10318 10322 10323 10325 10324 10328 10329 10330 10331 10332 Red Red Red Red Red Red Blue Blue Blue Blue Blue Blue Yellow Yellow Yellow Yellow Yellow 22-16 22-16 22-16 22-16 22-16 22-16 16-14 16-14 16-14 16-14 16-14 16-14 12-10 12-10 12-10 12-10 12-10 .020X.110 .032X.110 .020X.187 .032X.187 .020X.205 .032X.250 .020X.110 .032X.110 .020X.187 .032X.187 .020X.205 .032X.250 .020X.110 .032X.110 .020X.187 .032X.187 .032X.250 .126 .126 .197 .197 .224 .260 .126 .126 .197 .197 .224 .260 .126 .126 .197 .197 .260 .256 .256 .252 .252 .260 .287 .256 .256 .252 .252 .260 .287 .256 .256 .256 .256 .287 .732 .732 .748 .748 .728 .807 .732 .732 .748 .748 .728 .807 .866 .866 .866 .866 .925 .394 .394 .394 .394 .394 .394 .394 .394 .394 .394 .394 .394 .512 .512 .512 .512 .512 .067 .067 .067 .067 .067 .067 .091 .091 .091 .091 .091 .091 .134 .134 .134 .134 .134 .157 .157 .157 .157 .157 .157 .177 .177 .177 .177 .177 .177 .217 .217 .217 .217 .217 .012 .012 .014 .014 .014 .016 .012 .012 .014 .014 .014 .016 .014 .014 .014 .014 .016 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 Vinyl Insulated Male Disconnects Per 100 (25 Pack located on Page 45) MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 167OF (75oC) 300 Volts INSULATED MATERIAL: Vinyl TERMINAL MATERIAL: Electro Tin Plated Brass FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches 58 Cat No. Color Wire Size AWG NEMA TAB W F L B C D T Bag Qty Master Bag Qty 10208 10210 10212 10213 10214 10222 10223 10224 10232 Red Red Red Red Red Blue Blue Blue Yellow 22-16 22-16 22-16 22-16 22-16 16-14 16-14 16-14 12-10 .020X.110 .032X.110 .020X.187 .032X.187 .032X.250 .020X.187 .032X.187 .032X.250 .032X.250 .110 .110 .189 .189 .250 .189 .189 .250 .250 .256 .256 .256 .264 .303 .256 .264 .303 .303 .728 .728 .748 .748 .827 .748 .748 .827 .945 .394 .394 .394 .394 .394 .394 .394 .394 .512 .067 .067 .067 .067 .067 .091 .091 .091 .134 .157 .157 .157 .157 .157 .177 .177 .177 .217 .020 .016 .020 .016 .016 .020 .016 .016 .016 100 100 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 1000 1000 Per 100 WIRE MANAGEMENT Nylon Insulated Double Crimp Female Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Brass Brazed Seam DOUBLE CRIMP: Extended Copper Sleeve for Multiple Crimps FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG 11902 11904 11906 11908 11910 11912 11914 11916 11918 11920 11922 11924 11926 11928 11930 11932 11934 Red Red Red Red Red Red Blue Blue Blue Blue Blue Blue Yellow Yellow Yellow Yellow Yellow 22-16 22-16 22-16 22-16 22-16 22-16 16-14 16-14 16-14 16-14 16-14 16-14 12-10 12-10 12-10 12-10 12-10 NEMA TAB W F L B C D T Bag Qty Master Bag Qty .020X.110 .032X.110 .020X.187 .032X.187 .020X.205 .032X.250 .020X.110 .032X.110 .020X.187 .032X.187 .020X.205 .032X.250 .020X.110 .032X.110 .020X.187 .032X.187 .032X.250 .126 .126 .197 .197 .224 .260 .126 .126 .197 .197 .224 .260 .126 .126 .197 .197 .260 .256 .256 .252 .252 .260 .287 .256 .256 .252 .252 .228 .295 .256 .256 .256 .256 .295 .772 .772 .787 .787 .768 .846 .772 .772 .787 .787 .768 .846 .866 .866 .866 .866 .925 .433 .433 .433 .433 .433 .433 .433 .433 .433 .433 .433 .433 .512 .512 .512 .512 .512 .067 .067 .067 .067 .067 .067 .091 .091 .091 .091 .091 .091 .134 .134 .134 .134 .134 .157 .157 .157 .157 .157 .157 .197 .197 .197 .197 .197 .197 .256 .256 .256 .256 .256 .012 .012 .014 .014 .014 .016 .012 .012 .014 .014 .014 .016 .014 .014 .014 .014 .016 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 14 15 12 20 Per 100 Nylon Insulated Double Crimp Male Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 10 24 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Brass Brazed Seam DOUBLE CRIMP: Extended Copper Sleeve for Multiple Crimps FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG NEMA TAB W F L B C D T Bag Qty Master Bag Qty 11942 11944 11946 11948 11950 11952 11954 11956 11958 Red Red Red Red Red Blue Blue Blue Yellow 22-16 22-16 22-16 22-16 22-16 16-14 16-14 16-14 12-10 .020X.110 .032X.110 .020X.187 .032X.187 .032X.250 .020X.187 .032X.187 .032X.250 .032X.250 .110 .110 .189 .189 .250 .189 .189 .250 .250 .256 .256 .256 .264 .303 .256 .264 .303 .303 .768 .768 .768 .768 .866 .787 .787 .874 .945 .433 .433 .433 .433 .433 .433 .433 .433 .512 .067 .067 .067 .067 .067 .091 .091 .091 .134 .157 .157 .157 .157 .157 .197 .197 .197 .256 .020 .016 .020 .016 .016 .020 .020 .016 .016 100 100 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 1000 1000 Per 100 59 WIRE MANAGEMENT Nylon Fully Insulated Disconnects - Male & Female (25 Pack Pg 45) MAXIMUM ELECTRIC CURRENT: Awg Amp Type Female Female Female Male Male Male Color Red Blue Yellow Red Blue Yellow 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 221OF (105oC) 300 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Brass Brazed Seam FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. 10411 10412 10414 10415 10416 10418 22 3 Wire Size 22-18 16-14 12-10 22-18 16-14 12-10 Tab Size .250 X .032 .250 X .032 .250 X .032 .250 X .032 .250 X .032 .250 X .032 W .260 .260 .260 .250 .250 .250 F .295 .295 .295 .303 .303 .303 L .866 .866 .945 .906 .945 .984 B .433 .433 .512 .433 .433 .512 C .067 .091 .134 .067 .091 .134 D .157 .177 .248 .157 .177 .248 T .032 .032 .032 .032 .032 .032 Bag Qty 100 100 100 100 100 100 Master bag Qty 1000 1000 1000 1000 1000 1000 Per 100 Nylon Fully Insulated Double Crimp Female Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Brass Brazed Seam DOUBLE CRIMP: Extended Copper Sleeve for Multiple Crimps FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. 11962 11964 11966 11968 11970 11972 11974 11976 11978 Color Red Red Red Red Red Blue Blue Blue Yellow Wire Size AWG 22-16 22-16 22-16 22-16 22-16 16-14 16-14 16-14 12-10 NEMA TAB .020X.110 .032X.110 .020X.187 .032X.187 .032X.250 .020X.187 .032X.187 .032X.250 .032X.250 W .126 .126 .197 .197 .260 .197 .197 .260 .260 F .256 .256 .252 .252 .295 .252 .252 .295 .295 L .768 .768 .795 .795 .846 .795 .795 .846 .953 B .433 .433 .433 .433 .433 .433 .433 .433 .512 C .067 .067 .067 .067 .067 .091 .091 .091 .134 D .157 .157 .157 .157 .157 .197 .197 .197 .256 T .012 .012 .014 .014 .016 .014 .014 .016 .016 FIG 1 1 2 2 1 2 2 1 2 Bag Qty 100 100 100 100 100 100 100 100 100 Master Bag Qty 1000 1000 1000 1000 1000 1000 1000 1000 1000 Per 100 Nylon Fully Insulated Double Crimp Male Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Brass Brazed Seam DOUBLE CRIMP: Extended Copper Sleeve for Multiple Crimps FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches 60 Cat No. 11982 11984 11986 Color Red Blue Yellow Wire Size AWG 22-16 16-14 12-10 NEMA TAB .032X.250 .032X.250 .032X.250 W .250 .250 .250 F .303 .303 .303 L .945 .945 .1.024 B .433 .433 .512 C .067 .091 .134 D .157 .197 .256 T .016 .016 .016 Bag Qty 100 100 100 Master Bag Qty 1000 1000 1000 Per 100 WIRE MANAGEMENT Vinyl Insulated Piggy Back Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 167OF (75oC) 300 Volts INSULATED MATERIAL: Vinyl TERMINAL MATERIAL: Electro Tin Plated Brass FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG NEMA TAB W W1 F F1 L B C D T Bag Qty Master Bag Qty 12012 12014 12016 Red Blue Yellow 22-16 16-14 12-10 .032X.250 .032X.250 .032x.250 .260 .260 .260 .250 .250 .250 .315 .315 .315 .323 .323 .323 .866 .866 .945 .394 .394 .512 .067 .091 .134 .157 .177 .217 .016 .016 .016 100 100 100 1000 1000 1000 Per 100 Nylon Insulated Double Crimp Piggy Back Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Brass Brazed Seam DOUBLE CRIMP: Extended Copper Sleeve for Multiple Crimps FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG NEMA TAB W W1 F F1 L B C D T Bag Qty Master Bag Qty 12022 12024 12026 Red Blue Yellow 22-16 16-14 12-10 .032X.250 .032X.250 .032X.250 .260 .260 .260 .250 .250 .250 .315 .315 .315 .323 .323 .323 .906 .906 .945 .433 .433 .512 .067 .091 .134 .157 .197 .256 .016 .016 .016 100 100 100 1000 1000 1000 Per 100 Nylon Fully Insulated Double Crimp Piggy Back Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Brass Brazed Seam DOUBLE CRIMP: Extended Copper Sleeve for Multiple Crimps FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG NEMA TAB W W1 F F1 L B C D T Bag Qty Master Bag Qty 12032 12034 Red Blue 22-16 16-14 .032X.250 .032X.250 .260 .260 .250 .250 .315 .315 .323 .323 .846 .846 .433 .433 .067 .091 .157 .197 .016 .016 100 100 1000 1000 Per 100 61 WIRE MANAGEMENT Vinyl Insulated Bullet Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 167OF (75oC) 600 Volts INSULATED MATERIAL: Vinyl TERMINAL MATERIAL: Electro Tin Plated Brass FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. 12042 12044 12046 12048 Color Red Blue Blue Yellow Wire Size AWG 22-16 16-14 16-14 12-10 W .157 .157 .197 .197 F .335 .335 .335 .335 L .827 .827 .827 .925 B .394 .394 .394 .512 C .067 .091 .091 .134 D .157 .177 .177 .217 T .016 .016 .016 .016 Bag Qty 100 100 100 100 Master Bag Qty 1000 1000 1000 1000 Per 100 12 20 10 24 Nylon Insulated Double Crimp Bullet Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Brass Brazed Seam DOUBLE CRIMP: Extended Copper Sleeve for Multiple Crimps FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. 12052 12054 12056 12058 Color Red Blue Blue Yellow Wire Size AWG 22-16 16-14 16-14 12-10 W .157 .157 .197 .197 F .335 .335 .335 .335 L .866 .866 .866 .925 B .433 .433 .433 .512 C .067 .091 .091 .134 D .157 .197 .197 .256 T .016 .016 .016 .016 Bag Qty 100 100 100 100 Master Bag Qty 1000 1000 1000 1000 Per 100 Nylon Fully Insulated Double Crimp Bullet Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Brass Brazed Seam DOUBLE CRIMP: Extended Copper Sleeve for Multiple Crimps FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches 62 Cat No. Color Wire Size AWG W F L B C D T Bag Qty Master Bag Qty 12062 12064 Red Blue 22-16 16-14 .157 .157 .412 .413 1.063 1.063 .394 .394 .067 .091 .157 .177 .016 .016 100 100 1000 1000 Per 100 WIRE MANAGEMENT Vinyl Insulated Receptacle Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 167OF (75oC) 600 Volts INSULATED MATERIAL: Vinyl TERMINAL MATERIAL: Electro Tin Plated Brass FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. 12072 12074 12076 12078 Color Red Blue Blue Yellow Wire Size AWG 22-16 16-14 16-14 12-10 W .154 .154 .193 .193 F .276 .276 .276 .276 L .846 .846 .846 .965 B .394 ..394 .394 .512 C .067 .091 .091 .134 D .157 .177 .177 .217 Bag Qty 100 100 100 100 T .016 .016 .016 .018 Master Bag Qty 1000 1000 1000 1000 Per 100 Nylon Insulated Double Crimp Receptacle Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Brass Brazed Seam DOUBLE CRIMP: Extended Copper Sleeve for Multiple Crimps FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG W F L B C D T Bag Qty Master Bag Qty 12082 12084 12086 12088 Red Blue Blue Yellow 22-16 16-14 16-14 12-10 .154 .154 .193 .193 .276 .276 .276 .276 .886 .886 .886 .965 .433 .433 .433 .512 .067 .091 .091 .134 .157 .197 .197 .256 .016 .016 .016 .018 100 100 100 100 1000 1000 1000 1000 Per 100 Nylon Fully Insulated Double Crimp Receptacle Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Brass Brazed Seam DOUBLE CRIMP: Extended Copper Sleeve for Multiple Crimps FEATURES: Serrated Barrel, Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG 12092 12094 12096 Red Blue Blue 22-16 16-14 16-14 W F L B C D .154 .154 .193 .276 .276 .276 .992 .992 1.063 .433 .433 .433 .067 .091 .091 .157 .197 .197 T Bag Qty Master Bag Qty .016 .016 .016 100 100 100 1000 1000 1000 Per 100 63 WIRE MANAGEMENT Non-Insulated Butt Splice Connectors MAXIMUM ELECTRIC CURRENT: Awg Amp 26 5.5 24 7 22 9 20 12 18 17 16 18 14 30 12 35 10 50 8 70 6 95 4 125 CONNECTOR MATERIAL: Electro Tin Plated Tubular Copper MAXIMUM ELECTRIC RATING: 1500C 600V Measurement = inches Wire Size AWG 26-22 22-16 16-14 12-10 8 6 4 Cat No. 12102 12104 12106 12108 12110 12112 12114 L .472 .591 .591 .591 .827 1.024 1.142 D .083 .130 .154 .213 .276 .350 .445 d1 .051 .067 .091 .134 .181 .232 .307 Bag Qty 100 100 100 100 100 100 100 T .016 .031 .031 .039 .047 .059 .069 Vinyl Insulated Butt Splice Connectors Master Bag Qty 1000 1000 1000 1000 1000 1000 1000 Per 100 25 Pack located on Page 45) MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 8 70 6 95 4 125 2 170 MAXIMUM ELECTRIC RATING: 167OF (75oC) 600 Volts CONNECTOR MATERIAL: Tin Plated Tubular Copper/Copper Plate INSULATED MATERIAL: Vinyl FEATURES: Expanded Insulation Measurement = inches Cat No. 10182 10184 Color Red Blue Wire Size AWG 22-16 16-14 L .969 .969 D .157 .177 d1 .067 .091 Material Copper Plate Copper Plate Bag Qty 100 100 Master Bag Qty 1000 1000 10186 Yellow 12-10 1.043 .248 12128 Red 8 1.398 .335 .134 Copper Plate 100 1000 .177 Tubular Copper 100 1000 12130 Blue 6 1.772 12132 Yellow 4 2.067 .413 .232 Tubular Copper 100 1000 .488 .307 Tubular Copper 100 12134 Red 2 2.165 1000 .610 .374 Tubular Copper 100 1000 Per 100 Nylon Insulated Butt Splice Connectors MAXIMUM ELECTRIC CURRENT: Awg Amp 26 5.5 24 7 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 221OF (105oC) 600 Volts CONNECTOR MATERIAL: Tin Plated Tubular Copper/Copper Plate INSULATED MATERIAL: Nylon FEATURES: Expanded Insulation Measurement = inches Cat No. 12142 12144 12146 12148 64 Color Yellow Red Blue Yellow Wire Size AWG 26-22 22-16 16-14 12-10 L .787 1.075 1.075 1.075 D .079 .126 .150 .209 d1 .051 .067 .091 .134 Material Tubular Copper Copper Plate Copper Plate Copper Plate Bag Qty 100 100 100 100 Master Bag Qty 1000 1000 1000 1000 Per 100 WIRE MANAGEMENT Non-Insulated Parallel Connectors MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 CONNECTOR MATERIAL: Electro Tin Plated Tubular Copper MAXIMUM ELECTRIC RATING: 1500C 600V Measurement = inches Wire Size AWG 22-16 16-14 12-10 Cat No. 12152 12154 12156 L .315 .315 .335 D .130 .154 .213 d1 .067 .091 .134 Bag Qty 100 100 100 T .031 .031 .039 Master Bag Qty 1000 1000 1000 Per 100 Vinyl Insulated Parallel Connectors MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 167OF (75oC) 600 Volts CONNECTOR MATERIAL: Electro Tin Plated Tubular Copper INSULATED MATERIAL: Vinyl FEATURES: Expanded Insulation Measurement = inches Cat No. Color Wire Size AWG L D d1 Bag Qty Master Bag Qty 12162 12164 12166 Red Blue Yellow 22-16 16-14 12-10 .650 .650 .795 .157 .177 .248 .067 .091 .134 100 100 100 1000 1000 1000 Per 100 Vinyl Insulated 3-Way & 4-Way Connectors MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 167OF (75oC) 600 Volts INSULATION MATERIAL: Vinyl CONNECTOR MATERIAL: Electro Tin Plated Copper INSULATED MATERIAL: Vinyl FEATURES: Expanded Insulation Measurement = inches 4-Way 3-Way Cat No. Color Wire Size AWG 12172 12174 12176 12178 12180 12182 Red 3-Way Blue 3-Way Yellow 3-Way Red 4-Way Blue 4-Way Yellow 4-Way 22-16 16-14 12-10 22-16 16-14 12-10 Stud size d2 L D E #8 #8 #8 #8 #8 #8 .157 .157 .157 .157 .157 .157 .669 .709 .866 1.339 1.398 1.713 .157 .177 .248 .157 .177 .248 .394 .394 .512 .394 .394 .512 d1 Bag Qty Master Bag Qty .067 .091 .134 .067 .091 .134 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 Per 100 65 WIRE MANAGEMENT Non-Insulated Flag Female Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp Fig 1 Fig 2 Wire Size AWG 22-18 22-18 22-18 22-18 16-14 16-14 16-14 16-14 12-10 Cat No. 12412 12414 12416 12418 12420 12422 12424 12426 12428 Fig 3 NEMA TAB .020X.187 .032X.187 .032X.250 .032X.250 .020X.187 .032X.187 .032X.250 .032X.250 .032X.250 20 4 18 7 16 10 14 15 12 20 10 24 TERMINAL MATERIAL: Electro Tin Plated Brass MAXIMUM ELECTRIC RATING: 1500C 600V Fig 3 Fig 2 Fig 1 22 3 Measurement = inches W .197 .197 .260 .260 .197 .197 .260 .260 .260 F .244 .244 .299 .307 .244 .244 .299 .307 .299 L .445 .445 .551 .591 .457 .457 .551 .591 .571 B .217 .217 .291 .366 .217 .217 .291 .366 .295 T .016 .016 .016 .018 .016 .016 .016 .018 .018 Bag Qty 100 100 100 100 100 100 100 100 100 Fig 1 1 1 2 1 1 1 2 3 Master Bag Qty 1000 1000 1000 1000 1000 1000 1000 1000 1000 Per 100 Nylon Insulated Flag Female Disconnects MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 MAXIMUM ELECTRIC RATING: 221OF (105oC) 300 Volts INSULATED MATERIAL: Nylon TERMINAL MATERIAL: Electro Tin Plated Brass FEATURES: Serrated Barrel, Expanded Insulation Fig 1 66 Measurement = inches Fig 2 Cat No. 12432 12434 12436 12438 12440 Color Red Red Red Blue Blue Wire Size AWG 22-18 22-18 22-18 16-14 16-14 NEMA TAB .020X.187 .032X.187 .032X.250 .020X.187 .032X.187 W .197 .197 .260 .197 .197 F .276 .276 .299 .276 .276 L .591 .591 .598 .598 .598 d1 .063 .063 .063 .083 .083 T .016 .016 .016 .016 .016 Fig. 1 1 2 1 1 Bag Qty 100 100 100 100 100 Master Bag Qty 1000 1000 1000 1000 1000 12442 Blue 16-14 .032X.250 .260 .299 .598 .083 .016 2 100 1000 Per 100 WIRE MANAGEMENT Heat Shrinkable Terminals provide an environmentally sealed wire termination. They insulate, seal & protect joints from physical abuse, abrasion, water, salt & other corrosive element. Heat Shrinkable - Ring Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 600 Volts SHRINK TEMP: 302oF (150oC) RESISTANT TEMP: 14oF ~ 221oF (-26oC ~ 105oC) INSULATION MATERIAL: High Density PE TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel Measurement = inches Cat No. 12212 12214 12216 12218 12220 12222 12224 12226 12228 Color Red Red Red Red Red Red Blue Blue Blue Wire Size AWG 22-16 22-16 22-16 22-16 22-16 22-16 16-14 16-14 16-14 d2 #6 #8 #10 1/4 5/16 3/8 #6 #8 #10 W .217 .315 .315 .457 .457 .535 .260 .335 .374 L .984 1.122 1.122 1.358 1.358 1.476 1.043 1.201 1.201 Bag Qty 100 100 100 100 100 100 100 100 100 Master Bag Qty 1000 1000 1000 1000 1000 1000 1000 1000 1000 12230 Blue 16-14 1/4 .472 1.398 100 1000 12232 Blue 16-14 5/16 .472 1.398 100 1000 12234 Blue 16-14 3/8 .535 1.476 100 1000 12236 Yellow 12-10 #8 .374 1.346 100 1000 12238 Yellow 12-10 #10 .374 1.339 100 1000 12240 Yellow 12-10 1/4 .472 1.476 100 1000 12242 Yellow 12-10 5/16 .591 1.654 100 1000 12244 Yellow 12-10 3/8 .591 1.654 100 1000 12246 Yellow 12-10 1/2 .756 1.831 100 1000 Per 100 Heat Shrinkable - Spade Terminals MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 600 Volts SHRINK TEMP: 302oF (150oC) RESISTANT TEMP: 14oF ~ 221oF (-26oC ~ 105oC) INSULATION MATERIAL: High Density PE TERMINAL MATERIAL: Electro Tin Plated Copper Brazed Seam FEATURES: Serrated Barrel Measurement = inches Cat No. Color Wire Size AWG d2 W L Bag Qty Master Bag Qty 12252 12254 12256 12258 12260 12262 Red Red Red Blue Blue Blue 22-16 22-16 22-16 16-14 16-14 16-14 #6 #8 #10 #6 #8 #10 .252 .283 .374 .236 .283 .366 1.154 1.165 1.181 1.122 1.161 1.201 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 12264 Yellow 12-10 #8 .354 1.319 100 1000 12266 Yellow 12-10 #10 .354 1.319 100 1000 12268 Yellow 12-10 1/4 .472 1.614 100 1000 Per 100 67 WIRE MANAGEMENT Heat Shrinkable - Female Disconnectors MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 300 Volts SHRINK TEMP: 302oF (150oC) RESISTANT TEMP: 14oF ~ 221oF (-26oC ~ 105oC) INSULATION MATERIAL: High Density PE DOUBLE CRIMP: Extended Copper Sleeve TERMINAL MATERIAL: Tin Plated Brass FEATURES: Serrated Barrel Measurement = inches Cat No. Color Wire Size AWG NEMA TAB W D L Bag Qty Master Bag Qty 12272 12274 12276 Red Blue Yellow 22-16 16-14 12-10 .032X.250 .032X.250 .032X.250 .260 .260 .260 .217 .236 .319 1.339 1.339 1.378 100 100 100 1000 1000 1000 Per 100 Heat Shrinkable - Fully Insulated Female Disconnectors MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 300 Volts SHRINK TEMP: 302oF (150oC) RESISTANT TEMP: 14oF ~ 221oF (-26oC ~ 105oC) INSULATION MATERIAL: High Density PE DOUBLE CRIMP: Extended Copper Sleeve TERMINAL MATERIAL: Tin Plated Brass FEATURES: Serrated Barrel Measurement = inches Cat No. 12282 12284 12286 Color Red Blue Yellow Wire Size AWG 22-16 16-14 12-10 NEMA TAB .032X.250 .032X.250 .032X.250 W .260 .260 .260 D .256 .256 .295 L 1.102 1.102 1.102 Bag Qty 100 100 100 Per 100 Box Qty 1000 1000 1000 Heat Shrinkable - Male Disconnectors MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 300 Volts SHRINK TEMP: 302oF (150oC) RESISTANT TEMP: 14oF ~ 221oF (-26oC ~ 105oC) INSULATION MATERIAL: High Density PE DOUBLE CRIMP: Extended Copper Sleeve TERMINAL MATERIAL: Tin Plated Brass FEATURES: Serrated Barrel Measurement = inches 68 Cat No. Color Wire Size AWG NEMA TAB W D L Bag Qty Master Bag Qty 12292 12294 12296 Red Blue Yellow 22-16 16-14 12-10 .032X.250 .032X.250 .032X.250 .250 .250 .250 .217 .236 .319 1.339 1.339 1.378 100 100 100 1000 1000 1000 Per 100 WIRE MANAGEMENT Heat Shrinkable - Bullet Disconnectors MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 300 Volts SHRINK TEMP: 302oF (150oC) RESISTANT TEMP: 14oF ~ 221oF (-26oC ~ 105oC) INSULATION MATERIAL: High Density PE DOUBLE CRIMP: Extended Copper Sleeve TERMINAL MATERIAL: Tin Plated Brass FEATURES: Serrated Barrel Measurement = inches Cat No. Color Wire Size AWG W D L Bag Qty Box Qty 12312 12314 Red Blue 22-16 16-14 .157 .157 .217 .236 1.299 1.299 100 100 1000 1000 12316 Blue 16-14 .197 .236 1.299 100 1000 12318 Yellow 12-10 .197 .319 1.398 100 1000 Per 100 Heat Shrinkable - Fully Insulated Receptacle Disconnectors MAXIMUM ELECTRIC CURRENT: Awg Amp 22 3 20 4 18 7 16 10 14 15 12 20 10 24 MAXIMUM ELECTRIC RATING: 300 Volts SHRINK TEMP: 302oF (150oC) RESISTANT TEMP: 14oF ~ 221oF (-26oC ~ 105oC) INSULATION MATERIAL: Nylon & High Density PE DOUBLE CRIMP: Extended Copper Sleeve TERMINAL MATERIAL: Tin Plated Brass FEATURES: Serrated Barrel Measurement = inches Cat No. 12322 12324 Color Red Blue Wire Size AWG 22-16 16-14 W .154 .154 D .256 .295 Bag Qty 100 100 L 1.594 1.594 Master Bag Qty 1000 1000 Per 100 Heat Shrinkable - Butt Splice Connectors MAXIMUM ELECTRIC CURRENT: Awg Amp 22 9 20 12 18 17 16 18 14 30 12 35 10 50 MAXIMUM ELECTRIC RATING: 600 Volts SHRINK TEMP: 302oF (150oC) RESISTANT TEMP: 14oF ~ 221oF (-26oC ~ 105oC) INSULATION MATERIAL: High Density PE TERMINAL MATERIAL: Electro Tin Plated Copper Tubular Measurement = inches Cat No. 12332 12334 12336 Color Red Blue Yellow Wire Size AWG 22-16 16-14 12-10 d2 .067 .091 .134 L 1.417 1.417 1.614 Bag Qty 100 100 100 Master Bag Qty 1000 1000 1000 Per 100 69 WIRE MANAGEMENT Nylon Cable Ties Made from UL approved Nylon 6/6 Normal service temperature range -40o to 185oF (-40o to 85oC ) Flammability rating UL94V-2 20087 & 20089 UL181b-C listed for use with UL non-metallic air ducts & air connectors Packed in Sealed Plastic Bags 70 Cat. No. Tensil Strength (Lbs.) Length (Inches) Width (Inches) Max Bundle Dia (Inches) Bag Qty Master Bag Qty 20012 20014 18 18 3 4 .094 .098 .71 .99 100 100 1000 1000 20016 18 4 3/4 .098 1.18 100 1000 20018 18 5 1/2 .098 1.38 100 1000 20020 18 6 1/2 .098 1.73 100 1000 20022 18 8 .098 2.17 100 1000 20032 40 4 3/4 .125 1.18 100 1000 20034 40 6 .140 1.54 100 1000 20036 40 8 .125 2.17 100 1000 20038 40 10 .140 2.91 100 1000 20040 40 11 1/2 .140 3.35 100 1000 20052 50 7 .156 1.93 100 1000 20054 50 8 .179 2.17 100 1000 20056 50 11 .187 3.19 100 1000 20058 50 14 1/2 .187 4.02 100 1000 20060 50 17 .187 4.92 100 100 20072 120 8 .296 2.17 100 100 20074 120 11 .296 3.19 100 100 20076 120 15 .296 4.33 100 100 20082 175 17 3/4 .312 5.24 100 100 20084 175 21 5/8 .312 6.54 100 100 20085 175 24 .351 7.28 100 100 20086 175 30 .351 9.29 100 100 20087 175 36 .351 10.63 100 100 20088 175 46 .351 14.17 100 100 20089 20092 175 250 48 11 .351 .500 14.96 3.19 100 100 100 100 20094 250 21 5/8 .500 6.54 100 100 20096 250 28 3/4 .500 8.86 100 100 20098 250 40 1/2 .500 12.48 100 100 Per 100 WIRE MANAGEMENT Ultraviolet Black Nylon Cable Ties Carbonate ’A’ added for greater resistance to ultra violet in outdoor usage Made from UL approved Nylon 6/6 Normal service temperature range -40o to 185oF(-40o to 85oC ) Flammability rating UL94V-2 Packed in Sealed Plastic Bags Cat No. 20212 Tensil Strength (Lbs.) 18 Max Bundle Dia (Inches) .71 Bag Qty 100 Master Bag Qty 1000 20214 20216 .098 .99 100 1000 .098 1.18 100 1000 5 1/2 .098 1.38 100 1000 6 1/2 .098 1.73 100 1000 18 8 .098 2.17 100 1000 20232 40 4 3/4 .125 1.18 100 1000 20234 40 6 .140 1.54 100 1000 20236 40 8 .125 2.17 100 1000 20238 40 10 .140 2.91 100 1000 20240 40 11 1/2 .140 3.35 100 1000 20252 50 7 .156 1.93 100 1000 20254 50 8 .179 2.17 100 1000 20256 50 11 .187 3.19 100 1000 20258 50 14 1/2 .187 4.02 100 1000 20260 50 17 .187 4.92 100 100 20272 120 8 .296 2.17 100 100 20274 120 11 .296 3.19 100 100 20276 120 15 .296 4.33 100 100 20282 175 17 3/4 .312 5.24 100 100 20284 175 21 5/8 .312 6.54 100 100 20285 175 24 .351 7.28 100 100 20286 175 30 .351 9.29 100 100 20287 175 36 .351 10.63 100 100 20288 175 46 .351 14.17 100 100 20289 175 48 .351 14.96 100 100 20292 250 11 .500 3.19 100 100 20294 250 21 5/8 .500 6.54 100 100 20296 250 28 1/2 .500 8.86 100 100 20298 250 40 1/2 .500 12.48 100 100 Length (Inches) 3 Width (Inches) .094 18 4 18 4 3/4 20218 18 20220 18 20222 Per 100 71 WIRE MANAGEMENT Colored Nylon Cable Ties 50# Tensil Strength 50# 8” Length .179” Width Cat No. Color Bag Qty Master Bag Qty 20611 20613 20614 20615 20616 20617 20618 20619 20623 20624 20625 20626 20627 Red Yellow Green Blue Brown Orange Gray Purple Fluorescent Yellow Fluorescent Green Fluorescent Blue Fluorescent Pink Fluorescent Orange 100 100 100 100 100 100 100 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 50# 11” Length .187” Width Cat No. Color Bag Qty Master Bag Qty 20631 20633 20634 20635 20637 20638 Red Yellow Green Blue Orange Gray 100 100 100 100 100 100 1000 1000 1000 1000 1000 1000 PER 100 PER 100 Marker Nylon Cable Ties Identification ties & plates combine the ease of using a cable tie with the permanent identification of your product 20361 20362 & 20363 20364 20366 & 20367 Cat No. Tensil Strength (Lbs.) Length (Inches) Width (Inches) Max Bundle Dia(Inches) Marker Size Bag Qty Master Bag Qty 20361 18 5.12 .098 .98 .79 x 1.10 100 100 20362 18 3.94 .098 .98 .31 x .98 100 100 20363 18 7.87 .098 1.97 .59 x 1.18 100 100 20364 18 4.33 .098 .98 .31 x .98 100 100 20366 50 7.87 .179 1.97 .51 x 1.10 100 100 20367 50 10.62 .179 2.95 .51 x 1.10 100 100 72 Per 100 WIRE MANAGEMENT Mounting Nylon Cable Ties Use the screw eye to position and secure bundled harnesses with screws, bolts or rivets Fasten bundles, hoses, ducts, etc. to panels or other surfaces Accepts #10 Screw Cat No. Tensil Strength (Lbs.) Length (Inches) Width (Inches) Max Bundle Dia (In) Bag Qty NATURAL COLOR Master Bag Qty 20312 20314 20316 25 40 50 3 7/8 6 8 .098 .144 .164 .98 1.54 2.17 100 100 100 1000 1000 1000 20317 50 11 7/8 .187 3.35 100 1000 20318 50 14 7/16 .187 4.02 100 100 20320 120 15 5/8 .308 4.80 100 100 .098 .144 .98 1.54 100 100 1000 1000 Per 100 ULTRAVIOLET BLACK 20332 20334 25 40 3 7/8 6 20336 50 8 .164 2.17 100 1000 20337 50 11 7/8 .1889 3.35 100 1000 20338 50 14 7/16 .187 4.02 100 100 20340 120 15 5/8 .308 4.80 100 100 Releasable Nylon Cable Ties These ties remain securely locked until intentionally released by operating the finger catch Good for temporary fastening Cat No. Tensil Strength (Lbs.) Length (Inches) 20412 20414 50 50 6 8 20418 50 20420 50 20422 20424 50 50 6 8 20428 50 20430 50 Width (Inches) NATURAL COLOR Max Bundle Dia (In) Bag Qty Master Bag Qty Per 100 .183 .183 1.56 2.17 100 100 1000 1000 11 7/8 .187 3.46 100 100 14 1/2 .187 4.02 100 100 .183 .183 1.56 2.17 100 100 1000 1000 11 7/8 .187 3.46 100 100 14 1/2 .187 4.02 100 100 ULTRAVIOLET BLACK 73 WIRE MANAGEMENT Security Nylon Ties 20372 20374 For the purpose of identification Made from UL approved Nylon 6/6, 94V-2 20376 Cat No. Length Width Max Bundle Dia Marking Pad Bag Qty Master Bag Qty Per 100 20372 4.37” 0.10” 0.79” 0.31” x 1.09” 100 1000 20374 9.78” 0.14” 1.97” 1.42” x 0.75” 100 1000 20376 15.75” 0.19” 4.02” 1.44” x 0.75” 100 —— Air Handling Cable Ties For Plenum Areas Meets UL 2043 for use in air handling spaces Generates low smoke & offers low heat release Burgundy Color 50 Lb. Tensil strength Cat. No. Length Width Max Bundle Dia. Bag Qty Case Qty 20982 20984 20986 8.0” 11.8” 14.8” .19” .19” .19” 2.0” 3.0” 4.0” 100 100 100 5000 5000 5000 Per 100 Tefzel Cable Ties For Plenum Areas Suitable for bundling cables of wires in plenum areas Can be used in severe environments including acidic areas and high energy radiation exposure Manufactured from flourpolymer materials Aqua blue-green color Tefzel will not burn in air, but it will burn in oxygen-enriched environments The limiting oxygen index (LOI) as measured by the “Candle test” (ASTM D2862) is 30% Tefzel is rated 94V-0 by Underwriters Laboratories Inc. in their burning test classification for polymeric materials Temperature rated –45oF to +302oF (–43oC to 150oC) Cat No. 20902 20906 20910 74 Tensil Strength 18 50 50 Length 3.75” 7.25” 14.25” Width .09” .19” .19” Bag Qty 100 100 100 Master Bag Qty 100 100 100 Per 100 WIRE WIRE MANAGEMENT MANAGEMENT Self Stick Cable Ties (Hoop & Loop Fasteners) Self Stick Bundle wire and cords in one easy step Hook on one side, loop on the other & fabric attaches back to itself for a secure closure Reusable & good for temporary applications where continuous changes are anticipated Attach to single cable and simply wrap around the whole cable bundle Will not overcinch or accidentally cut delicate Cat 5E & Fiber Optics Allow for 2” overlap when installing 50# tensil strength Non-metallic so they’ll never short circuit electrical equipment or damage a computer disc 8 1/4” Length 5/8” Width Cat No. Bundle Dia Color Bag Qty 20970 20972 20974 2.0” 2.0” 2.0” Black Blue Red 10 10 10 20976 2.0” Yellow 10 12 1/4” Length 5/8” Width Each Tie Cat No. Bundle Dia Color Bag Qty 20960 20962 20964 20966 3.375” 3.375” 3.375” 3.375” Black Blue Red Yellow 10 10 10 10 Each Tie Stainless Steel Ties Made of stainless steel grade 304 Ideally suited for hazardous environments Roller-ball design allows low insertion force Self locking for fast and easy installation Smooth edges will not damage wires Can install by hand as well as tool Normal Operating Temperature –112oF to 1000oF (–80oC to 538oC) Non-Magnetic, UV resistant & fireproof Thickness Max Bundle Dia (Inches) Bag Qty Master Bag Qty .18 .01 1.0 100 6000 .18 .01 2.0 100 6000 10.5 .18 .01 2.7 100 6000 14.2 .18 .01 4.0 100 4000 200# 20.4 .18 .01 6.0 100 3000 20922 200# 26.8 .18 .01 8.0 100 2000 20924 200# 33.0 .18 .01 10.0 100 2000 20930 450# 6.0 .31 .01 1.0 100 3000 20932 450# 7.9 .31 .01 2.0 100 3000 20934 450# 10.5 .31 .01 2.7 100 3000 20936 450# 14.2 .31 .01 4.0 100 2000 20938 450# 20.4 .31 .01 6.0 100 1500 20940 450# 26.8 .31 .01 8.0 100 1000 20942 450# 33.0 .31 .01 10.0 100 1000 Cat No. Tensil Strength Length (Inches) Width (Inches) 20912 200# 5.0 20914 200# 7.9 20916 200# 20918 200# 20920 Per 100 75 WIRE MANAGEMENT 250 Piece Assortment Pack Nylon Cable Ties Contains the following: Quantity 25 Ties 50 Ties 100 Ties 50 Ties 25 Ties Tensil(Lbs) Strength 18 40 50 50 50 Product Number 20014 20034 20054 20056 20058 Cat No. Number Of Ties 20300 250 Length (Inches) 4 6 8 11 14 1/2 Per Package 650 Piece Canister Pack Nylon Cable Ties Contains the following : Qty 100 Ties 50 Ties 50 Ties 50 Ties 50 Ties 300 Ties 50 Ties 1 Case Minimum Product Number 20014 Natural 20014 Red 20014 Blue 20014 Green 20014 Yellow 20054 Natural 20056 Natural Cat No. 20302 Tensil (Lbs) Strength 18 18 18 18 18 50 50 Canisters/Case 12 Length (Inches) 4 4 4 4 4 8 11 Per Canister Cable Marker Plates Used to mark cable bundles for permanent identification Installed using standard nylon tie wraps A fine tip permanent marker is recommended for markings Manufactured using natural colored nylon Cat No Length Width Bag Qty Master Bag Qty 20382 20384 20386 20388 1.02” 1.66” 2.39” 2.45” 0.60” 0.83” 0.99” 2.03” 10 10 10 10 100 100 100 100 Each Push Tie Mounts Drill ¼” hole on board to fix tie mount and then insert tie into mount for bundling cables Made from UL approved Nylon 6/6, 94V-2 76 Cat No. Max Cable Tie Accepted 20342 .316” Wide (120#) Bag Qty Master Bag Qty Per 100 100 1000 WIRE MANAGEMENT Self-Adhesive Tie Mounts 20352/20356 Designed to support light weight wire bundles when properly applied on any clean, smooth grease-free surface Four sided design allows ties to be easily inserted from any angle For heavy support, mounting hole is provided for screws on models #20354/#20357 & #20355/#20359 To apply, simply peel off backing paper from sticky mount and apply mount to surface. After that, cable ties can be inserted to secure wire bundles Made from UL approved Nylon 6/6, 94V-2 20354/20357 20355/20359 Cat No. Color Mount Type Base Size (Inches) Cable Tie Accepted (inches) Bag Qty Master Bag Qty 20352 Natural Regular .3/4X3/4 20354 Natural #8 Screw Hole 1.1X1.1 .138 Wide 100 1000 .190 Wide 100 20355 Natural (4) #8 Screw Holes 1000 1.5x1.5 .390 Wide 100 20356 UV Black 1000 Regular .3/4X3/4 .138 Wide 100 20357 1000 UV Black #8 Screw Hole 1.1X1.1 .190 Wide 100 20359 1000 UV Black 4) #8 Screw Holes 1.5x1.5 .390 Wide 100 1000 Per 100 Saddle Tie Mounts Saddle design provides maximum stability to wire bundles To apply, simply fix mount with a screw and secure wire bundles with nylon cable ties Made from UL approved Nylon 6/6, 94V-2 #8 Screw Accepted 20358/20360 20351 Cat No. 20351 Length .748” Width .374” Height .197” Cable Tie Accepted (Inches) .195 Wide (50#) Bag Qty 100 Master Bag Qty 1000 20358 .585” .390” 20360 .897” .624” .273” .195 Wide(50#) 100 1000 .351” .351 Wide(120#) 100 1000 Per 100 Wall Plug Mounts Affix wire & cable permanently with looped cable tie Tap screw into pre-drilled hole Features concentric circle barbs for extra holding strength Made from UL approved Nylon 6/6, 94V-2 20346 20348 Cat No. 20346 20348 Length (L) .38” .50” L1 Cable Tie Accepted .23” .38” Length (L2) .37” .49” Height (H) .96” 1.46” Height (H1) .24” .25” Width (W) .24” .39” Bag Qty 100 100 Master Bag Qty 1000 1000 Per 100 77 WIRE MANAGEMENT Plastic Cable Clamps Secure cable, tubing, wires, fiber optics, etc. Used for construction, maintenance and assembly line operations Use in control cabinets, panels and general applications Molded in the open position for easy assembly Tough, durable, yet extremely lightweight Working temperature range: -66oFto 340oF (19oC to 171oC) Clean, smooth edges to prevent abrasion & for easy handling Use with #10 screw (.18”) (not included) Made from UL approved Nylon 6/6, 94V-2 Dimensions = Inches Cat No. Closed Position B C Screw Hole Bag Qty 22412 22414 1/8” 3/16” .37 .41 .38 .38 .18 .18 10 10 22416 1/4” 22418 3/8” .39 .39 .18 10 .49 .47 .18 22420 10 1/2” .60 .47 .18 10 22422 5/8” .72 .47 .18 10 22424 3/4” .72 .47 .18 10 22426 1” .87 .47 .18 10 22428 1 1/4” 1.03 .47 .18 10 22430 1 1/2” 1.18 .47 .18 10 22442 22444 1/8” 3/16” .37 .41 .38 .38 .18 .18 10 10 22446 1/4” .39 .39 .18 10 22448 3/8” .49 .47 .18 10 22450 1/2” .60 .47 .18 10 22452 5/8” .72 .47 .18 10 22454 3/4” .72 .47 .18 10 22456 1” .87 .47 .18 10 22458 1 1/4” 1.03 .47 .18 10 22460 1 1/2” 1.18 .47 .18 10 Width D Each Clamp Natural Color UV Black Color Adjustable Cable Clamp Thick adhesive back for quick installation Designed to secure wire bundles where fixing holes are impractical Can be quickly applied to almost any clean, smooth & grease-free surface Can accommodate various cables which will save you money Locks securely & can be easily re-opened for routing changes Easy to install, open for unlimited usage Made from UL approved Nylon 6/6, 94V-2 Dimensions = Inches 78 Cat No. Bundle Dia Range A B C D E F Bag Qty 22472 22474 .31-.41 .39-.49 1.00 1.25 .87 1.09 .75 .75 .06 .06 .40 .40 10 10 22476 .50-.61 1.50 1.25 .75 .06 .50 10 22478 .65-.79 1.65 1.75 1.00 .06 .50 10 22480 .87-1.00 1.65 1.75 1.00 .06 .50 10 Each Clamp WIRE MANAGEMENT Spiral Wrap Allows breakouts of single/multiple wires & rerouting of replacement wires Forms a neat, protective bundle Easy to use - twists on like tape Durable, reusable with retained spiral strength Cut-to-fit versatility in convenient roll form Made from polyethylene material Excellent in insulation and binding strength Good resistance to ordinary solvents and abrasion Dimensions = Inches Cat No. Bundle Range D 22010 22011 22012 22013 22014 22015 22016 22017 .06 - 0.71 .16 - 1.97 .24 - 2.36 .30 - 2.36 .35 - 2.65 .47 - 2.76 .59 - 3.94 .79 - 5.12 .06 .16 .24 .30 .35 .47 .59 .79 22110 .06 - 0.71 .06 22111 .16 - 1.97 .16 22112 .24 - 2.36 22113 .30 - 2.36 22114 DI W Roll Length .16 .28 .43 .45 .55 .59 .72 .77 33’ 33’ 33’ 33’ 33’ 33’ 33’ 33’ .12 .16 33’ .24 .28 33’ .24 .31 .43 33’ .30 .39 .45 33’ .35 - 2.65 .35 .47 .55 33’ 22115 .47 - 2.76 .47 .59 .59 33’ 22116 .59 - 3.94 .59 .75 .72 33’ 22117 .79 - 5.12 .79 .94 .77 33’ Per Roll Natural Color .12 .24 .31 .39 .47 .59 .75 .94 UV Black Color Split Flex Tubing Protects and organizes wires and cables Constructed of polyethylene Corrugated for added flexibility Split along length for easy insertion Black polypropylene material Dimensions = Inches Cat No. Inside Diameter Outside Diameter Roll Length Box Quantity 22212 22214 22216 22218 22220 .29 .42 .59 .79 .98 .40 .63 .77 .94 1.18 100’ 100’ 100’ 100’ 100’ 30 15 8 5 4 Per Roll 79 WIRE MANAGEMENT Soft Wiring Duct Safe temporary or permanent enclosure of electrical cords, data cables, & other objects that present a trip hazard Soft PVC products, packaged in rolls for easy storage Cut to required length Supplied with double sided tape Length: 6’1” per pieces Material: PVC Dimensions = Inches Cat No. Width (W) Color W1 H H1 22612 2 1/2” Brown .75 .60 .43 22614 2 1/2” Black .75 .60 .43 22616 2 1/2” Off White .75 .60 .43 22618 4” Brown 1.16 .91 .61 22620 4” Black 1.16 .91 .61 22622 4” Off White 1.16 .91 .61 Each Piece Double-Sided Adhesive Foam Tape Use to affix raceway, duct, & track lighting Sticks on both sides Cat No. Width Length 22512 22514 .32” .51” 165’ 165’ 22516 .71” 165’ 22518 .91” 165’ 22520 1.10” 100’ Each Roll Porcelain Wire Holders Wire holder has porcelain head on lag screw Cat No. Duty Trade Size A B C Box Qty 21892 Light 1-11/16” 2.265” 2.00” 1.375” 25 21894 Medium 2-1/4” 4.750” 2.75” 2.250” 10 Each Porcelain Wire Holders - Heavy Duty Reinforced Heavy duty wire holder has reinforced saddle Cat No. Screw Size A B C Box Qty 21896 2-1/4” Lag 5.615” 3.200” 1.75” 25 Each Porcelain Wire Holders - Heavy Duty Adjustable Wire holder has a steel reinforced saddle for use with pipe or pole attachment Fits 1-1/4” to 3” pipe 80 Cat No. Conduit Size A B Min. Max. 21898 1-1/4” to 3” 1.875” 7.625” 1.620” 3.93” Box Qty Each 10 WIRE MANAGEMENT Snap Bushings Eliminate sharp edges and insulate your raw-edged holes in metal chassis Easily locks into hole firmly with fingertip pressure Protect electrical cables, ropes, utility lines passing through metal 1/8” maximum steel thickness Dimensions = Inches Made from UL approved Nylon 6/6, 94V-2 Cat No. 22311 22312 Mounting Hole Diameter .28 .31 Inside Diameter .22 .20 Head Diameter .34 .37 Overall Height .24 .31 Bag Qty 10 10 22314 .37 .25 .47 .41 10 22316 .50 .32 .57 .41 10 22318 22320 .63 .75 .48 .56 .73 .85 .41 .41 10 10 22322 .87 .68 .94 .45 10 22324 .99 .75 1.10 .45 10 22326 1.17 .95 1.31 .45 10 22328 1.50 1.14 1.62 .45 10 22330 1.72 1.39 1.88 .46 10 Each Bushing Snap Bushings with Shutters Flexible shutters to accommodate a variety of cable & hose sizes from a minimum of 1/8” to a maximum as shown in the table Shutters absorb vibration & cushion cables, tubes, etc. Fingertip pressure snap-locks the bushing into the mounting hole Universal design to hold various cable range with a fixed sizes 1/8” maximum steel thickness Dimensions = Inches Made from UL approved Nylon 6/6, 94V-2 Cat No. 22342 22344 Mounting Holes Diameter .63 .75 Max Cable Size ID .44 .50 Head Diameter .72 .86 Overall Height .41 .39 Bag Qty 10 10 22346 .81 .50 .89 .39 10 22348 .87 .56 .93 .45 10 22350 1.00 .80 1.12 .44 10 22352 1.09 .88 1.21 .44 10 22354 1.35 1.15 1.48 .44 10 Each Bushing Snap Bushings (Open/Closed) Protect wires, tubing, etc. from sharp/uneven drilled & punched metal holes with smooth plastic chassis 1/8” maximum steel thickness Finger tip pressure snap-locks the bushing into the mounting hole Can be applied where cables are already installed Can accommodate cables too large to fit through the inside diameter of a standard bushing Made from UL approved Nylon 6/6, 94V-2 Dimensions = Inches Cat No. 22362 22364 Mounting Hole Diameter .37 .50 Inside Diameter .26 .31 Head Diameter .42 .56 Overall Height .375 .375 Bag Qty 10 10 22366 .63 .45 .70 .375 10 22368 .75 .52 .80 .375 10 22370 .87 .67 .92 .375 10 22372 1.00 .80 1.06 .375 10 Each Bushing 81 WIRE MANAGEMENT Plastic Knockout Plugs Plastic Pull Caps To cap unused knockout holes in box or enclosure Cat No. Trade Size A Bag Qty 21721 1/2” 1-1/8” 100 21722 3/4” 1-1/4” 100 21723 1” 1-1/2” 50 Each Used for capping EMT, Rigid, and most bushings Cat. No. Trade Size A B Box Qty 21712 1/2” 11/16” 5/8” 100 21713 3/4” 15/16” 13/16” 100 21714 1” 1-3/16” 1-1/16” 100 21715 1-1/4” 1-1/2” 1-3/8” 50 21716 21717 1-1/2” 2” 1-3/4” 2-3/16” 1-9/16” 2-1/16” 25 25 Each Hole Plugs Plug electrical knockouts with finger tip pressure Low cost and assure good appearance Less costly & safer than steel snap-in blanks 1/8” maximum steel thickness Made from UL approved Nylon 6/6, 94V-2 Cat No. 22380 22382 Sizes listed are actual (not trade sizes) EMT Insulating Bushings Meets NEC Article 300-15C requirements Listed for use in environmental air handling spaces per 2005 NEC code requirements 300-22C Polyethylene rated at 900C Examples: Power, Cable TV, computer datalines, telephone/modem, audio/visual, alarm and security systems 82 Mounting Hole Head Diameter Diameter .18 (3/16”) .25” .31 (5/16”) .47” Overall Height .23” .31” Bag Qty 10 10 22384 .37 (3/8”) .51” .41” 10 22386 .50 (1/2”) .67” .41” 10 22388 .63 (5/8”) .78” .41” 10 22390 .75 (3/4”) .90” .41” 10 22392 .87 (7/8”) .98” .44” 10 22394 .98 (1”) 1.11” .45” 10 22396 1.18 (1-1/4”) 1.35” .45” 10 22398 1.50 (1-1/2”) 1.67” .44” 10 22400 1.75 (1-3/4”) 1.93” .44” 10 Each Plug EMT Insulating Bushings protect cables from abrasion by EMT Fast & Easy press-on installation Holds tight as cables are pulled Less expensive alternative to costly fittings when used just for wire Cat. No. 21700 21701 21702 21703 21704 21705 21706 21707 21708 21709 Trade Size 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 3-1/2” 4” A .522 .538 .614 .620 .620 .620 1.12 1.19 1.22 1.22 B .570 .764 .954 1.26 1.44 1.86 2.34 2.78 3.27 3.71 Bag Qty 100 50 25 25 25 20 - Each WIRE MANAGEMENT Plastic Insulating Bushings Threaded fittings for RIGID or IMC conduit Thermoplastic material—heat, impact and torque resistance Strong reinforcing ribs & rim around bottom Flame retardant Polypropylene (Rated to 221°F, 105°C) 1/2” wide Dimension Measurement = Inches Cat No. Size A B C D Bag Qty 21732 1/2” 0.593 1.063 0.390 0.343 100 21733 3/4” 0.796 1.312 0.390 0.328 100 21734 1” 1.000 1.562 0.562 0.468 50 21735 1-1/4” 1.328 1.921 0.562 0.468 50 50 21736 1-1/2” 1.546 2.187 0.562 0.468 21737 2” 2.000 2.687 0.625 0.562 25 21738 2-1/2” 2.406 3.187 0.671 0.718 20 21739 3” 3.000 3.843 0.750 0.687 —- 21740 3-1/2” 3.406 4.359 0.750 0.687 —-- 21741 4” 3.906 4.843 0.765 0.703 —- 21742 5” 4.921 6.375 1.000 0.843 —- 21743 6” 5.890 7.500 1.000 0.843 —- Anti-Short Bushings Each Insulates conductor from cut armor ends on flexible BX or Greenfield conduit Overlapping horizontal flange protects against sharp metal edges Tapered design assures fast insertion Extra length assures positive grip Polypropylene material resists weather extremes, oil, moisture and chemicals Rated up to 194oF Cat No. Size Cable Sizes A B C D Bag Qty Each 21752 21753 0 1 14/2, 14/3, 12/2 14/4, 12/3, 6/1, 4/1 0.56” 0.65” 0.671” 0.671” 0.38” 0.45” 0.312” 0.312” 35 35 21754 2 12/4, 10/2, 10/3, 2/1 0.61” 0.859” 0.58” 0.125” 35 21755 3 10/4, 8/2, 8/3, 1/1 0.67” 1.046” 0.79” 0.109” 20 21756 4 8/4, 6/4, 6/3, 6/2, 4/3, 4/2 0.83” 1.266” 1.00” 0.156” 16 Polypropylene Stud Bushings Fit existing irregular shaped holes in metal studs Alleviates the need to punch holes in metal studs, weakening the structural member Protects wire insulation from abrasion in metal studs Bushing allows smooth wire pulling making a difficult job easier No tools needed Use these bushings to comply with paragraph 300-4(b)(1) of the 2005 NEC code which states that: “In both exposed & concealed locations where nonmetallic-sheathed cables pass through either factory or field punched, cut, or drilled slots or holes in metal members, the cable shall be protected by bushings or grommets covering all metal edges & securely fastened in the opening prior to installation of the cable Examples of common hole configurations in Metal studs that stud bushing protects Cat No. Stud Size A B C D Bag Qty 21760 2x4 5.67” 2.50” .505” 1.30” 25 Each 83 WIRE MANAGEMENT Non-Metallic Cable Connectors - Lock Wedge Style Accommodates one or two 14-2, 14-3 and 12-2 cables, one 12-3, 10-2 and 10-3 cable, and one or two .300 inch or .600 inch diameter cords Push-in design with a captive lock wedge that secures cable with a single squeeze from standard electrician’s pliers Excellent insulation and superior strain relief Sized to fit 1/2” knockout size Cat No. Size A B C D E Bag Qty Case Qty 21762 1/2” 1.342” 2.420” 0.834” 0.883” 0.825” 50 1000 Each Non-Metallic Cable Connectors - Snap Style Smaller and more easily installed in confined and tight areas No tools required Snap in and you’re done Easily removed from knockouts and easy removal of Romex from connectors A labor saving connector with 60 pound test pull! Cat No. Cable Size Size 21764 Single Cable 14/2 - 10/3 Two Cables 14/2, 12/2, 14/3 1/2” Dim. “A” Dim. “B” Dim. “C” Bag Qty Case Qty Each 1” 3/8” 15/16” 100 3000 Non-Metallic Cable Connectors - Slot Style Fast and easy snap in installation of single or multiple cables Easy to remove and reuse Made of non-conductive plastic Cat. No. Size Cable Size Dim. “A” Bag Qty Case Qty 21766 1/2” 14/2 or 12/2 1-1/16” 100 5000 Each PVC Sill Plates Covers service cable where it bends to enter the building for an attractive finish May be used on all cable sizes from three #4 to three #0 Unaffected by seasonal temperature extremes Costs less than heavier metal types Cat. No. Wire Size A B C D E F G H I 21768 (3) #4 to (3) #0 2.187” 0.968” 0.750” 3.093” 1.406” 1.093” 2.968” 0.078” 25° Box Qty Each 250 Clamp Back Spacers Designed as a mounting spacer for 1/2”, 3/4, and 1” sizes of Rigid steel, IMC or EMT conduit PVC material is impervious to environmental conditions Use with all types of clamps or straps Cat. No. 84 21770 Size A 1/2”, 3/4’, 1” 2.625” B C D E F G H 1.000” 0.812” 0.375” 0.250” 0.265” 0.875” 0.343” Box Qty Each 25 WIRE MANAGEMENT Non-Metallic Liquid Tight Connectors Nylon construction, Type B, resists saltwater, gasoline, alcohol, oil and grease; UV rated for long outdoor life Liquid Tight Connectors Straight with Steel Locknut Cat No. Nominal Size Length (Inches) Width (Inches) Box Qty 100 21812 3/8” 1.4375 2.3125 21813 1/2” 1.6250 2.500 100 21814 3/4” 1.9375 2.8125 100 21815 1” 2.2500 3.4375 50 21816 1-1/4” 2.6875 4.2500 50 21817 1-1/2” 3.1250 4.6875 50 21818 2” 3.6250 5.3125 20 Each Liquid Tight Connectors 90° with Steel Locknut Nominal Length Size (Inches) Cat No. 21822 3/8” Width (Inches) Box Qty 0.83 100 2.1600 21823 1/2” 2.1600 0.83 100 21824 3/4” 2.5700 0.95 100 21825 1” 3.2200 1.12 50 21826 1-1/4” 3.8700 1.45 20 21827 1-1/2” 4.3300 1.53 20 21828 2” 5.3500 1.86 10 Each PVC Entrance Caps Accommodates 3-conductor #8 AWG to 3-conductor 4/0 AWG cables Rigid, weather-resistant material assembled with a galvanized back plate for easy installation Dimension Measurement = Inches Cat No. Size Cable Size A B C D E F G Box Qty Each 21772 Small #8, 6, 4, 2 2.000 2.718 1.343 1.125 0.687 0.531 1.968 21773 Medium #0, 00 3.031 4.031 1.750 1.375 1.125 0.687 2.875 72 21774 Large #000, 0000 3.031 4.031 2.125 1.625 1.125 0.687 2.875 72 200 Entrance head for mounting on PVC, RIGID, IMC and EMT conduit (Red adaptor included for EMT) Rugged plastic design is resistant to adverse weather conditons Provides 50% more wire room than other entrance heads Entire head acts as an insulator of high dielectric strength Dimension Measurement = Inches Cat No. Size A B C D E F G H J Box Qty 21782 1/2” 2.000 2.718 1.500 1.968 0.687 0.937 0.855 2.609 0.312 200 21783 3/4” 2.406 2.296 1.718 2.234 0.812 0.937 1.065 1.250 0.437 140 21784 1” 2.406 2.296 1.968 2.234 0.812 1.125 1.330 1.312 0.437 140 21785 1-1/4” 3.031 4.031 2.343 2.656 0.875 1.093 1.675 1.890 0.531 75 21786 1-1/2” 3.500 4.031 2.593 2.625 0.875 1.125 1.915 2.125 0.625 75 21787 2” 4.531 6.312 3.375 3.812 1.437 1.625 2.390 2.687 0.750 20 Each 85 WIRE MANAGEMENT Nylon Cable Glands Simply push the cable through the liquid tight nylon strain relief & tighten nut for quick installation Threads into your panel or for clearance, locknut included Internal ratchet provides self-locking against vibration ‘Collet’ design of body accommodates various size cords, cables, tubing, etc. Seal & clamp system allows the cord connector to tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable Nylon body material is resistant to most common chemicals & solvents For best results, use the minimum size that fits into your cable No disassembly required Made of UL approved NYLON 66, 94V-2 (Black), 22534-22542 UR Listed Weatherproof Does not have NPT threading Dimensions = Inches Cat No. 22532 22534 22536 22538 22540 22542 Mounting Hole D1 .47 .63 .79 .98 1.26 1.57 Cable Range .12-.26 .20-.39 .39-.55 .51-.71 .71-.98 .87-1.26 (MM) 1.25 1.50 1.50 1.50 1.50 1.50 D2 .33 .43 .58 .73 1.02 1.30 B1 .24 .38 .51 .65 .92 1.20 L1 .31 .62 .59 .59 .58 .70 L2 .48 .57 .78 .74 .80 .92 L3 .52 .66 .72 .88 1.03 1.24 Bag Qty 10 10 10 10 10 10 22544 22546 22548 1.97 2.40 2.48 1.18-1.50 1.34-1.73 1.65-1.97 1.50 1.50 1.50 1.62 2.13 2.20 1.50 1.73 1.95 .68 .73 1.00 1.01 1.06 1.16 1.24 1.28 1.43 10 10 10 Each Piece Nylon Cable Glands NPT Thread Screw into NPT Multi-purpose appliThread cation Watertight Color: Black Easy to assemble Made of UL ap Good strain relief proved NYLON 66, Wide clamping range 94V-2 (Black) Cat No. NPT Thread Cable Range D1 D2 B1 L1 L2 22550 1/4” 0.118” - 0.256” 0.520 0.327” 0.236” 0.299” 0.500” 22551 3/8” 0.197” - 0.394” 0.646 0.421” 0.354” 0.575” 0.539” Bag Qty Master Bag Qty 0.520” 10 100 0.661” 10 100 L3 22552 1/2” 0.394” - 0.551” 0.815 0.587” 0.500” 0.492” 0.740” 0.724” 10 100 22553 3/4” 0.512” - 0.709” 1.008 0.728” 0.650” 0.575” 0.701” 0.878” 10 100 22554 1” 0.709” - 0.984” 1.299 1.024” 0.933” 0.579” 0.811” 1.071” 10 100 22555 1-1/4” 0.866” - 1.260” 1.642 1.260” 1.142” 0.705” 0.882” 1.236” 10 100 86 Each Piece WIRE MANAGEMENT Nylon Cable Glands (with strain relief) Same features as Non NPT Cable Gland Strain relief design protects cable from breakage/right angle bending Does not have NPT threading Locknut included Made of UL approved NYLON 66, 94V-2 (Black) 22564-22568 UR Listed Dimensions = Inches Cat No. 22562 22564 Cable Range .12-.26 .20-.39 Mounting Hole D1 .47 .63 Pitch 1.25 1.50 D2 .33 .43 B1 .24 .38 L1 .31 .62 L2 .48 .57 L3 .52 .66 Bag Qty 10 10 22566 22568 .39-.55 .51-.71 .79 .98 1.50 1.50 .58 .73 .51 .65 .59 .59 .78 .74 .72 .88 10 10 Each Piece Right Angle Nylon Cable Glands NPT Thread Same features as Nylon Cable Gland NPT Thread 90o design protects cable from breakage NPT Threading (National Pipe Thread) Made of UL approved NYLON 66, 94V-2 (Black) Dimensions = Inches Cat No. 22582 22584 NPT Thread NPT 3/8” NPT 1/2” Cable Range .02-.35 .39-.51 Mounting Hole D1 .65 .83 D2 .47 .55 B1 .37 .51 L1 .46 .58 L2 .39 .46 L3 .66 .72 L 1.91 2.03 H 1.18 1.23 Bag Qty 10 10 22586 22588 NPT 3/4” NPT 1 1/4” .51-.63 .87-1.14 1.04 1.64 .76 1.24 .65 1.15 .58 .74 .49 .64 .88 1.22 2.54 3.35 1.64 2.09 10 10 Each Piece Alligator Test Clips Figure 2 Flexible Vinyl Molded Insulator Crimp Type Figure 1 Molded Handle Screw Type FIGURE 3 Flexible Vinyl Molded Insulator Screw Type Versatile Steel Clips Rated: 10 Amp Nickel Plated Precision Mesh Jaws No. 17320 17330 17335 17337 17340 Color Red Black Red Black Red Fig 1 1 2 2 3 Clip Length 2” 2” 1 11/16” 1 11/16” 1 11/16” Jaw Opening 5/16” 5/16” 5/16” 5/16” 7/16” Bag Qty 10 10 10 10 10 Master Bag Qty 100 100 100 100 100 17350 Black 3 1 11/16” 7/16” 10 100 Each Clip Insulated Battery Clamps For battery, battery charger and testing equipment applications Handle grips are insulated and color-coded for easy identification Steel material, crimp/solder wire attachment No. 17352 17354 17362 17364 Color Red Black Red Black Amp 10 10 50 50 Clip Length 3” 3” 4” 4” Jaw Opening 1-3/16” 1-3/16” 1-3/8” 1-3/8” Bag Qty 2 2 2 2 Master Bag Qty 10 10 10 10 Each Clamp 87 WIRE MANAGEMENT Plastic Cable Clips 35002 35014 35004 35006 35008 35010 35012 Impact resistant non-corrosive Complete with corrosion resistant hardened steel nails for securing cable to wood, cement, plaster, brick, etc. Nail heads are recessed for minimum exposure Smooth saddle prevents damage to insulation High-grade injection-molded polyethylene Resists rot, rust and the effects of temperature extremes 35000 35001 Dimension Measurement = Inches Cat No. 35000 35001 35002 35004 35006 35008 35010 35012 35014 For Wire Sizes 2 Nail 12/2 & 14/2 Romex & UF (1/2” wide) 2 Nail 10/2 Romex & UF (3/4” wide) 12/2 & 14/2 Romex & UF 14/3 Romex 10/3 & 12/3 Romex RG 59 Coax Cable, CAT 5 UTP 4 Pair RG 6 Coax Cable 4 Conductor Telephone Wire Small cords such as lamp, thermostat, speaker & phone Color White White White Gray Gray Gray Gray Gray White W x Ht x Ht (inside) .49 x .31 x .21 .74 x .31 x .21 .39 x .39 x .26 .31 x .51 x .32 .43 x .65 x .48 .24 x .35 x .26 .28 x .43 x .30 .14 x .23 x .15 .24 x .25 x .15 Bag Qty 100 100 100 100 100 100 100 100 100 Master Bag Per 100 1000 1000 1000 1000 1000 1000 1000 1000 1000 Plastic Stacking Staples Plastic insulated staples quickly and easily secure vertical stacks of non-metallic cable Electro-zinc plated nails provide strength and durability Smooth saddles prevent damage to insulation UV-protected Polyethylene saddle resists rot, rust and deterioration 1/2” wide, white color Cat. No. 35016 35018 35020 Cable Size (2) 14/2 & 12/2 (3) 14/2 & 12/2 (4) 14/2 & 12/2 Bag Qty Case Qty 50 500 50 500 50 500 Per 100 Service Entrance Cable Straps Plastic insulated straps quickly and easily secure service entrance cable Electro-zinc plated nails provide strength and durability Stabilized against UV rays and extreme cold; withstand deterioration and breakage Smooth saddles prevent damage to insulation, Polyethylene material Cat. No. Cable Size 35022 #6 & #8 SEU 35024 #2 SEU 35026 4/0 SEU 35028 #6 SER & 1/2” EMT 35030 #2 SER & 3/4” EMT 35032 2/0 SER 35034 4/0 SER Bag Qty 50 25 25 50 25 25 25 Case Qty Per 100 500 250 250 500 250 250 250 Two Hole PVC Pipe Straps For Plastic Conduit Schedule 40 PVC Heavy Duty Polythene resists deterioration from UV rays and breakage from extreme cold 88 No. 19490 19492 19494 19496 19498 19500 19501 19502 19503 Size 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 4” Box Qty 100 100 100 50 50 50 25 25 25 Each Strap WIRE MANAGEMENT Galvanized Self-Seal Roof Flashings Slips easily over vent pipe - self-sealing to vent pipe surface Self-sealing elastomeric collar attached to a base of heavy gage aluminum Collar will not crack, chip, peel or separate from aluminum Eliminates caulking - no sealing compound required Absolutely leak-proof & fits most roof sizes Accommodates all vent types - ie: plastic, copper, steel or cast iron Cat No. G11830 G12201 G12202 G12203 G12204 Size 1/2” - 1” 1-1/4” - 1-1/2” 2” 3” 4” Box Qty 12 12 12 12 12 Each Rubber Flexible Flashings Rubber seizes the vent pipe with a locking grip preventing leakage entirely One piece construction molded from military grade elastomer assures long life & all weather protection - will not crack, chip or peel; oil, ozone & sunlight (UV) resistant Highly adaptable product installs quickly & easily & adjusts to wide range of roof pitches, contours & surfaces Accommodates all vent types - ie: plastic, copper, steel or cast iron Cat No. G30101 G30102 G14025 G30103 G30104 Size 1-1/4” - 1-1/2” 2” 2-1/2” 3” 4” Box Qty 12 12 12 12 12 Each Metal Roof Flashings Attaches to most decks, aluminum, copper, lead, plastic, fiberglass, etc. Applications include plumbing, heating & air conditioning pipes & vents, electrical service entrances, etc. Flexible, weather resistant E.P.D.M. resists ozone & UV light Pleated cone adjusts to any roof pitch & allows for complete flexibility Effectively isolates the pipe from the building movement created by expansion, contraction & vibration -300F - 2500F continuous service temperature range Compatible with pipes of steel, PVC, copper & sheet metal Cat No. G14741 G14743 Outside Diameter of Base Pipe to be Flashed Diameter 1/4” - 2” 1/4” - 4” 4-3/4” 7-3/4” Height Each 3” 4” Retrofit Roof Flashings Designed for applications where continuous pipes or obstructions prevent the use of standard flashings Easily installed by wrapping around existing pipe & fastening down onto roof deck The pliable cone & stainless steel closure can easily be trimmed to the exact diameter of pipe to be flashed Unique stainless steel closure effectively resists corrosion & provides a positive weatherproof seal Corrosion-resistant aluminum base can be easily shaped to conform to most roof profiles Made of flexible, weatherproof E.P.D.M. rubber Insulates the pipe from building movement caused by expansion, contraction, & vibration -300F - 2500F continuous service temperature range Pipe diameter markings on the flexible cone in inches & millimeters Cat No. Outside Diameter of Pipe to be Flashed Base Diameter Height G14751 G14752 1/4” - 2” 1/4” - 4” 4-3/4” 7-3/4” 3” 4” Each 89 WIRE MANAGEMENT 1 Piece PVC Latching Raceways One piece with flexible hinge connecting base and cover 10 Joint Couplings in each box at no charge allows you to make 8’ pieces Comes with pre-applied foam tape adhesive backing Highly flexible hinge allows raceway to open & close repeatedly without cracking Self locking latch Cat 5E/6 compliant fittings with 1” bend radius thus maintaining end to end connectivity even when filled to capacity or pulled through the raceway UL 94V-O flame resistant, 600 volt power rated Sold Only In Box Quantity Cat No. Size Color Width Height Plastic Thickness Tape Width Pieces Couplings Each Per Box Per Box Piece 22712 3/4” x 1/2” x 4’ White 0.760 0.505 0.050 0.500 20 10 22716 3/4” x 1/2” x 4’ Ivory 0.760 0.505 0.050 0.500 20 10 22718 1” x 1/2” x 4’ White 1.010 0.505 0.050 0.750 20 10 22722 1” x 1/2” x 4’ Ivory 1.010 0.505 0.050 0.750 20 10 22724 1-1/2 x 3/4” x 4’ White 1.500 0.755 0.050 1.000 20 10 22728 1-1/2 x 3/4” x 4’ Ivory 1.500 0.755 0.050 1.000 20 10 Junction Box End Cap & Reducer 2.95” Insert Clearance Cat No. 22732 22736 22738 22742 22744 Size 3/4” 3/4” 1” 1” 1 1/2” 22748 1 1/2” Reduces To 3/4” 3/4” 3/4” or 1” Color White Ivory White Ivory White Pieces Per Bag 10 10 10 10 10 3/4” or 1” Ivory 10 Each Piece Cat No. Description Color 22752 1 Gang Deep Box White 22756 1 Gang Deep Box Ivory 22758 22762 2 Gang Deep Box 2 Gang Deep Box White Ivory 3 Way Tee Splice/Joint Cover 90 Cat No. Size Color Pieces Per Bag 22772 22776 22778 22782 22784 3/4” 3/4”’ 1” 1” 1-1/2” White Ivory White Ivory White 22788 1-1/2” Ivory Each Piece Each Piece Cat No. Size Color Pieces Per Bag 10 10 10 10 10 22812 22816 22818 22822 22824 3/4” 3/4” 1” 1” 1-1/2” White Ivory White Ivory White 10 10 10 10 10 10 22828 1-1/2” Ivory 10 Each Piece WIRE MANAGEMENT 90O Flat Elbow Cat No. Size Color Pieces Per Bag 22832 22836 3/4” 3/4” White Ivory 10 10 22838 1” White 10 22842 1” Ivory 10 22844 22848 1-1/2” 1-1/2” White Ivory 10 10 Each Piece Inside Corner Cat No. Size Color Pieces Per Bag 22852 22856 22858 22862 22864 3/4” 3/4” 1” 1” 1-1/2” White Ivory White Ivory White 10 10 10 10 10 22868 1-1/2” Ivory 10 Ceiling Entry Outside Corner Cat No. 22872 Size 3/4” Color White Pieces Per Bag 10 22876 3/4” Ivory 10 22878 1” White 10 22882 1” Ivory 10 22884 1-1/2” White 10 22888 1-1/2” Ivory 10 Each Piece Each Piece Cat No. Size Color Pieces Per Bag 22952 22956 22958 22962 22964 22968 3/4” 3/4” 1” 1” 1-1/2” 1-1/2” White Ivory White Ivory White Ivory 10 10 10 10 10 10 Each Piece PVC Latching Duct Cable Management Kit 3 Channels, 2 flat elbows, 1 inside elbow, 1 outside elbow, 1 T-fitting, 2 couplings-all parts made of UL 94-VO compliant, flame resistant PVC. Holds, guides, protects wires up to 600 volts. Comes with pre-applied self-adhesive tape. Sold Only In Box Quantity Sold Only In Box Quantity Cat No. 22682 22686 22688 22692 Description 3/4” X 1/2” X 4’ Raceway Kit 3/4” X 1/2” X 4’ Raceway Kit 1” X 1/2” X 4’ Raceway Kit 1” X 1/2” X 4’ Raceway Kit Color White Ivory White Ivory Kits Per box 10 10 10 10 Each Kit 91 WIRE MANAGEMENT Wire Marker Booklets Pocket-sized booklet of Self-Adhesive wire markers and matching terminal markers 450 Wire Markers Save time and money on site and in-plant initial hook up, troubleshooting, maintenance, and repairs. Cloth material has a better initial adhesion Assures durability and minimizes the potential of tearing. Oil ,water and abrasion resistant Service temperature from-40oF to +250oF (-40oC to +121oC) Cat No. 21252 Material Tyvek Std Marking 0-9 Markers Per Each Legend 45 Bag Qty 10 21253 21254 21257 21255 21258 21256 21260 21262 21264 21266 21268 21270 21272 Cloth Tyvek Cloth Tyvek Cloth Tyvek Cloth Cloth Cloth Cloth Cloth Cloth Cloth Cloth Cloth Cloth 45 10 10 10 10 10 10 150 150 150 150 45 45 33 27 21 Various Markings Various Markings 79 legends + 11 blank Kitchen, Outlets, Range, Bath, Lights, Dryer, etc. 10 10 10 10 10 10 10 10 10 10 10 10 10 21274 21276 21278 0-9 1-45 1-45 46-90 46-90 A-Z,0-15,+-/ A-Z,0-15,+-/ 1,2,3, A,B,C T1,T2,T3 L1,L2,L3 10 nema colors +,-,AC, DC, pos, neg, grnd, neut, spare, blank Burglar Alarm Fire Alarm Circuit Breaker Each Book 10 10 10 Write and Wrap Dispensers & Booklets Pocket sized disposable Contains a roll of pre-cut self laminating wire markers Each marker has a white area available for legend inscription using a pen or pencil After marking, simply pull back on the marker liner and the marker is dispensed On application the transparent portion of the clear vinyl marker wraps around itself to protect the write on area The adhesive is an aggressive acrylic that is impervious to oil and water Service temperature from -40oF to +250oF (-40oC to +121oC) 92 Cat No. Type Label Width Label Length Write Area Markers Per Dispenser or Booklet 21232 21234 Dispenser Dispenser 3/4” 3/4” 1-1/4” 1-7/8” 3/4” x 5/16” 3/4” x 1/2” 300 150 21236 Book 3/4” 1-5/8” 3/4” x 5/8” 120 21238 Book 1” 2-1/2” 1” x 3/4” 60 Each WIRE MANAGEMENT Wire Marker Dispensers Compact, carry-along dispenser with 10 refillable compartments that hold 8 foot rolls of tyvek tape numbered 0-9 Each roll contains 76 pre-cut markers 1/4” x 1 1/4” length Clear black legend Oil, water and abrasion resistant Acrylic adhesive Service temperature from -40oF to +200oF (-40oC to +93oC) Box Qty Each Dispenser/ Set of 10 Rolls Cat No. Description 21210 Preloaded dispenser with legends 0-9 5 Dispensers 21220 Set of 10 Refill rolls with legends 0-9 5 Sets (50) Rolls 21221 Set of 10 Refill rolls with legend 1 5 Sets (50) Rolls 21222 Set of 10 Refill rolls with legend 2 5 Sets (50) Rolls 21223 Set of 10 Refill rolls with legend 3 5 Sets (50) Rolls 21224 Set of 10 Refill rolls with legend 4 5 Sets (50) Rolls 21225 Set of 10 Refill rolls with legend 5 5 Sets (50) Rolls 21226 Set of 10 Refill rolls with legend 6 5 Sets (50) Rolls 21227 Set of 10 Refill rolls with legend 7 5 Sets (50) Rolls 21228 Set of 10 Refill rolls with legend 8 5 Sets (50) Rolls 21229 Set of 10 Refill rolls with legend 9 5 Sets (50) Rolls 21230 Set of 10 Refill rolls with legend 0 5 Sets (50) Rolls Voltage Markers STYLE A — 1Per Card 2 1/4” X 9” STYLE B — 4 Per Card 1 1/4” X 4.5” STYLE C — 18 Per Card 1/2” X 2 1/4” Identify voltage, conduit, electrical components, etc. Tough and permanent, they resist abrasion, oil, grease, moisture, chemicals and extreme high and low temperatures Bold black copy on bright orange background is the accepted color for this type of identification Voltage markers can be used on all sizes of conduit, panels, transformers, switchgear, controls and many other types of electrical equipment The permanent acrylic adhesive bonds firmly to most clean surfaces Cat No. Legend Markers Per Card Cards Per Bag 21312 21314 21316 21318 21320 21322 21324 21326 21328 21330 21332 21334 21336 21338 21340 120V 120V 120V 120/208V 120/208V 120/208V 208V 208V 208V 220V 220V 220V 277V 277V 277V 1 4 18 1 4 18 1 4 18 1 4 18 1 4 18 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Each Card Cat No. Legend Markers Per Card Cards Per Bag 21352 21354 21356 21358 21360 21362 21364 21366 21368 21370 21372 21374 21376 21378 21380 230V 230V 230V 240V 240V 240V 460V 460V 460V 480V 480V 480V Three Phase Three Phase Three Phase 1 4 18 1 4 18 1 4 18 1 4 18 1 4 18 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Each Card 93 WIRE MANAGEMENT Safety Signs Identify hazards & reduce the possibility of serious injury 4 Sizes 10” x 14, ”14” x 10”, 7” x 10”, 7” x 5” Adhesive backed Outdoor vinyl grade Outdoor durability UV resistant characteristics 25 Signs per master bag Cat No. 21412 21414 21416 21418 21420 21422 Type Notice Notice Notice Danger Danger Caution Legend Authorized Personnel Only No Smoking In Accordance with OSHA… (See * below) Cable Buried Here Keep Out Area In front of Electrical Panel Must Be Kept Clear for 36” OSHA-NEC Regulations Size (HxW) 10”x14” 10”x14” 10”x14” 10”x14” 10”x14” 7”x10” 21424 21426 21428 21429 21430 21432 21434 21436 21438 Danger Danger Danger Danger Danger Caution Danger Danger Danger 10”x14” 10”x14” 10”x14” 7”x10” 10”x14” 7”x10” 14”x10” 14”x10” 7”x5” 21440 21442 21444 21446 Danger Danger Danger Danger Authorized Personnel Only Buried Cable High Voltage High Voltage High Voltage High Voltage Keep Out Lock Out Equipment Before Servicing No Smoking Eye Protection Required Arc Flash Hazard Bilingual Signs High Voltage High Voltage Do Keep Out Lock Out Before Working on Equipment No Smoking Each Sign 14”x10” 14”x10” 10”x14” 14”x10” * In Accordance with OSHA Standard 1910.147, All equipment, machines and processes shall be locked out prior to servicing. Lockout procedures are posted in the main operating area and/or by the main energy source of each machine. If you have any questions about the lockout procedures, please see your supervisor or the safety director. This standard will be strictly enforced. Lockout Tags Lockout tags warn of Hazard in and around Machinery, Equipment, Valves, etc. Made of rigid 15 mil vinyl with 7/16” brass grommet Easy to write on with permanent marker Moisture and mildew resistant for outdoor use Each durable long lasting tag is 5-3/4 x 3” Available in standard packs of 5 tags Legend Tags Per Bag 21512 Do Not Operate 5 21514 Do Not Operate (w/clear photo flap) 5 21516 Do Not Open 5 21518 Do Not Close 5 21520 Do Not Start 5 21522 Do Not Throw Switch 5 21524 Do Not Energize 5 21526 21528 Do Not Energize (w/clear photo flap) Equipment Locked Out (with stripes) 5 5 21530 Men Working on Machinery (Bilingual) 5 Cat No. 94 Each Tag WIRE MANAGEMENT Lockout Stations Lockout Stations serve as a convenient distribution point for lockout components; locks, tags, and hasps Built for most demanding conditions Highly visible yellow stations are easy to locate Made of pre-drilled durable PVC foam board May be purchased with or without compliance components Locks, Hasps & Tags not included - order separately Cat No. Description Board Size Each 21612 4 Lock, Lockout center, Empty 9” x 12” 21614 10 Lock, Lockout center, Empty 12” x 19” 21616 20 Lock, Lockout center, Empty 24” x 19” Locks, Hasps & Tags not included - order separately Padlocks Padlocks Keyed Alike Padlocks Keyed Different Each Color Is Keyed The Same Cat No. Color Box Qty Each Cat No. Color Box Qty Each 21632 21634 21636 21638 21640 21642 Blue Black Brown Red Green Gold 5 5 5 5 5 5 21652 21654 21656 21658 21660 21662 Blue Black Brown Red Green Gold 5 5 5 5 5 5 Padlocks Keyed Different Accepts Master Key *Master Key Sold Separately Solid Anodized Aluminum Lock Body measures 1-1/2” wide x 3/4” thick x 1-13/16” high Chrome plated hardened steel shackle is 1/4” dia x 1” vertical clearance x 25/32” horizontal clearance Double Ball Bearing Locking Mechanism Re-keyable 5 pin brass cylinder and anti-pick pinning Each lock comes with 2 keys Complies with OSHA Rule (1910.147) for Safety Lockout Guards Against Accidental Start-Up Injuries Cat No. Color 21672 21674 21676 21678 21680 21682 21683 Blue Black Brown Red Green Gold Box Qty Each Master Key 5 5 5 5 5 5 1 Lock Labels 3/4” x 4-7/16” vinyl labels with clear protective covers Labels are an easy way to identify employee’s locks Permanent pressure-sensitive adhesive Write on labels with ballpoint marker pen or typewriter Cat. No. Color Qty Per Pack 21582 21584 21586 21588 21590 Blue Orange Black Green Red 10 10 10 10 10 Per Pack Hasps Accepts padlocks up to 3/8” shackle diameter Manufactured from 12 gauge steel .060 mallable steel plate for maximum security Red plastic coating for visibility Multiple party lockouts with same device Solid Steel U Bolt Protection for electric, gas, water, steam, acid & pneumatic control units & levers Prevents engagement of circuit breaker boxes & disconnect switches Allow up to 6 workers to lock out a single energy source Superior resistance to rust and added dielectric strength Cat No. 21694 21696 Size 1” 1 1/2” Box Qty 10 10 Each 95 WIRE MANAGEMENT Fire Stop Caulking Compound for Commercial & Residential Intumescent Fire, Smoke & Draft Stop Sealant Fireblock Intumescent – expands up to 250 percent its original size ASTM E-84 0 Flame & 0 Smoke Certified Unaffected by freeze/thaw ASTM E-136 Residential Use Certified ASTM E-814 Commercial Use Compatible Water resistant Meet Fire/Draft/Smoke criteria for Use for interior applications BOCA – CABO – UPC – SBCC/IRC Zero VOC’s Non-Combustible - does not burn Adhesion to almost any surface For Commercial Building Non-Corrosive & Non-Combustible For Residential Building Non-Toxic Environmentally safe Tested at 3000oF for 8 hours Odorless Expands when heated Water based, Paintable 1 year shelf life Easy gunability Red Color cULus listed Morris Fire Stop is Fireproof Other brands are only Fire Retardant Cat No. Description Case Qty 67090 99982 99984 99986 10.5 oz. Tube 29oz. Tube 1 Gallon pail 5 Gallon pail 12 12 1 1 Each Tube Silicone Sealant Seals electrical components & provides weather-tight closure for electrical boxes & exterior fixtures Acetic cure anti-fungus sealant suitable for construction & household repairs Exhibits an excellent sealing and adhesion to glass, tiles, ceramics, fiberglass, aluminum, non-oily wood, painted surfaces, plastic & other non-porous materials Protect & seal, waterproof & flexible indoors & outdoors Fills voids & irregularities. Not paintable 10.3oz Tubes RTV 100% Silicone, flexible from –60°F to 450°F, 20°F min dispensing temp. Cat No. Color Case Qty 99912 99916 Clear White 12 12 99914 Black 12 Each Tube PVC Solvent Cement & Primer Clear Regular Body up to 4” Schedule 40, fast curing speed Clear Medium Body up to 6” Schedule 80, medium curing speed Clear Cold Weather Medium Body up to 6” Schedule 80, medium curing speed Purple Primer suitable for all conduit sizes 96 Cat No. Description Size Case Qty G30356S G30346S G30336S Regular Body Regular Body Regular Body 1/2 Pint Pint Quart 24 24 12 G40456S Medium Body 1/2 Pint 24 G40446S Medium Body Pint 24 G40436S Medium Body Quart 12 G2656S Cold Weather Medium Body 00F 1/2 Pint 24 0 G2646S Cold Weather Medium Body 0 F Pint 24 G2636S Cold Weather Medium Body 00F Quart 12 G90346S Primer (Purple Color) Pint 24 G90336S Primer (Purple Color) Quart 12 Each WIRE MANAGEMENT Wire Pulling Lubricant - Wax Based Provides superior lubricity Creamy texture applies easily and uniformly Clings to cable throughout long pulls Will not separate after freezing 25oF (-4oC) or at temperatures up to 200oF (93oC) Environmentally safe, non-toxic, non–flammable and non–corrosive Easy clean up Suitable for use with wire or cable insulated with rubber (R, RH, ETC.), neoprene, nylon, and PVC plastics (T, TW, THW, THHN, ETC.), high density polyethylene and cross linked polyethylene (XLP) It is not recommended for use on asbestos or low density Cat No. 99920 99922 99924 Size Quart Gallon 5 Gallon Case Qty 12 4 1 Each Power Glide Wire Pulling Lubricant - Water Based Gel Exceptional Lubricity for long, fast and high-temperature cable pulls Compatible with all Cable types - fiber optic, datacom, & electrical Non-corrosive, non-hazardous & non-flammable Apply by hand, brush or pump - easily diluted with water for custom applications in the field Human & environmentally safe - no gloves or eye protection needed, released no harmful fumes or gases, not derived from petroleum, safe around kids & pets, non-toxic, non-staining, hypoallergenic Reconstitutes with water - will not clog or attract dirt, makes later removal easy Cleans up fast with water, clear & odorless Does not stain clothes or solidify in conduit Cat No. 99930 99932 99934 Size Quart Gallon 5 Gallon Case Qty 12 4 1 Each Anti-Oxidant For AL/AL and AL/CU wire connections and aluminum conduit joints For use with all types of pressure type wire connectors including screw-on, tap, service entrance and split bolt Carrier material excludes air to prevent further oxidation Reduces galling and seizing Promotes good ground continuity through the joint Improves efficiency & service life of aluminum electrical applications Temperature range: -40oF to 302oF(-40oC to 150oC) Voltage: 600v Provides additional inter-strand and inter-conductor current paths for improved conductivity and cooler connections Suspended zinc particles penetrate and cut aluminum oxide Cat No. 99901 99904 99908 Size 1 ounces 4 ounces 8 ounces Case Qty 1 12 12 Each 97 WIRE MANAGEMENT Barricade Tape CAUTION CAUTION CAUTION Legend Made of long lasting, non-adhesive, reusable 3 mil polyethylene Exceptional quality, durability and performance Used above ground to mark off hazards Continuous repeat of warning Meets OSHA 1910.144 for physical hazards Cat No. 69002 69000 Legend Caution Caution Caution Caution Caution Caution Size 3” X 200’ 3” X 1000’ Color Yellow Yellow Box Qty 8 8 Each Underground Tape 4 Mil Non adhesive polyethylene Continuous repeat of warning Protects buried utility lines Should be installed 12” to 18” below ground level and 12” above pipes and conduits before backfilling Formulated to resist degradation from acid and alkali found in soils Cat No. 69008 69010 69011 69012 69016 Legend Caution Buried Electric Line Below Caution Buried Electric Line Below Caution Buried Electrical Line Below Caution Buried Telephone Line Below Caution Buried Fiber Optic Line Below Size 3” X 300’ 3” X 1000’ 3” X 1000’ 3” X 1000’ 3” X 1000’ Color Red Red Yellow Orange Orange Box Qty 16 8 8 8 8 69020 Caution Buried Electric Line Below 69021 Caution Buried Electrical Line Below 6” X 1000’ Red 4 6” X 1000’ Yellow 4 Each Detectable Tape CAUTION BURIED ELECTRIC LINE BELOW Legend 5 Mil Silver foil Continuous repeat of warning Easily located with any common metal detector For use before you dig Its highly visible colors make it easy to locate after dig has begun Formulated to resists degradation from acid and alkali found in soils Cat No. 69030 69040 Legend Caution Buried Electric Line Below Caution Buried Electric Line Below Size 3” X 1000’ 6” X 1000’ Color Red Red Box Qty 4 2 Each Self Fusing Amalgamating Tape (Silicone Rubber Tape) A silicone rubber tape with self bonding properties Molds & conforms to irregular shapes Ideal for covering cable lugs, splices, terminations, busbars, bare conductors, & telecommunication cable joints Excellent for moisture sealing in electrical, industrial & marine applications Easy to apply, simply cut off length required & remove form backing, then wrap over your item covering half the tape at a time, sticks to itself Forms a permanent bond in 24 hours 98 Cat No. 60230 Description Amalgamating Tape Length 16.5 Ft Width 1.5” Height .04” Each WIRE MANAGEMENT Vinyl Plastic Electrical Tape 3/4” X 60 Ft X 7 Mil High dielectric strength, high adhesion and shear Resistant to acids, alkalis, chemicals, oils, moisture and corrosion Withstands 1,200 V/MILS Cat No. 60000 60010 Color Black Red Sleeve Qty 10 10 Box Qty 350 350 60020 White 10 350 60030 Yellow 10 350 60040 Green 10 350 60050 Blue 10 350 60060 Brown 10 350 60070 Orange 10 350 60080 Gray 10 350 60090 Purple 10 350 Each Premium Grade Electrical Tape Flame retardant Cold Weather Resistant High dielectric strength, high adhesion and shear Resistant to acids, alkalis, chemicals, oils, moisture and corrosion Withstands 1,200 V/MILS Temperature Range 0°F to 176°F (-18°C to 80°C) Cat No. 60200 Color Black Size 3/4” X 60 Ft X 8.5 Mil Sleeve Qty 10 Box Qty 200 60202 Black 2” x 60 Ft x 8.5 Mil 1 100 Each Friction Tape Cloth construction offering good mechanical protection against abrasion and penetration of cable, splices and wire & used as temporary & binding tape Adhesive compound on both sides Overwrap electrical connections 1000v minimum dielectric strength Meets ASTM-D69, .014” thickness Cat No. 60210 Color Black Size 3/4” X 60 Ft Box Qty 100 60212 Black 2” X 60 Ft 25 Each Rubber Splicing Tape Self fusing with liner High quality unvulcanized rubber that will bond quickly to itself to form a solid mass of water-tight protection for electrical wires Primary insulation for electrical wires and cables splices of not more than 600v Flexible to withstand expansion and contraction High resistance to salt water, steam, oils, detergents, and other chemicals make it an ideal tape for pipe repair, automotive, marine, construction, etc. Dielectric strength 490 volts per mil, for use up to 176oF (80oC) Cat No. 60220 60222 Color Blue Blue Size 3/4” x 22 Ft x 30 Mil 2” x 22 Ft x 30 Mil Box Qty 100 50 Each 99 WIRE MANAGEMENT Thin Wall Heat Shrink Tubing Used for electrical insulation, wire harness, bundling, splices & terminations Flexible polyolifin tubing 2:1 Shrink ratio Rated for 600Volt 257oF (125oC) continuous operation Forms tough, smooth insulated covering resistant to common fluids and solvents Black color Cat No. Length Diameter Before Shrinking Diameter After Shrinking Bag Qty 68030 68032 68034 68036 68038 68040 68042 68044 6” 6” 6” 6” 6” 6” 6” 6” .078” .098” .137” .211” .250” .367” .484” .827” .029” .039” .059” .098” .117” .176” .234” .390” 50 50 50 10 10 10 10 10 68050 68052 68054 68056 68058 68060 68062 68064 660 Ft 660 Ft 660 Ft 330 Ft 330 Ft 165 Ft 165 Ft 165 Ft .078” .098” .137” .211” .250” .367” .484” .827” .029” .039” .059” .098” .117” .176” .234” .390” 1 Roll 1 Roll 1 Roll 1 Roll 1 Roll 1 Roll 1 Roll 1 Roll Each Piece Rolls Heavy Wall Heat Shrink Tubing - Flame Retardant High impact and abrasion resistance capable of withstanding severe mechanical abuse of U.R.D., submersible and direct burial installations Will not split or rupture during installation, even when overheated Thermoplastic meltable adhesive sealant liner provides complete environmental protection and insulation Flame retardant Meets: UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5,MIL-DTL-23053/15, IEEE 383 Wide shrinkage allows various shapes & Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation contours to be accommodated with one thickness requirements size tubing Rated for 600-1000V, 194oF (90oC) continuous use Insulates & protects electrical splices & Continuous operating temperature: -67°F to 230°F (-55oC to 110oC) terminations where maximum flame Shrink temperature: 248°F (120oC) retardancy & exceptional insulating & Black color sealing characteristics are required Cat No. 68004 68008 68011 68015 68020 Cable Range 12-6 AWG 8-1/0 AWG 2-4/0 AWG 3/0-400MCM 250-750MCM Length 6” 6” 8” 8” 12” Diameter Before Shrinking .400” .750” 1.100” 1.500” 2.000” 68022 68023 68024 68025 68026 12-6 AWG 8-1/0 AWG 2-4/0 AWG 3/0-400MCM 250-750MCM 48” 48” 48” 48” 48” .400” .750” 1.100” 1.500” 2.000” Diameter After Shrinking .150” .220” .375” .500” .750” Wall Thickness .09” .09” .12” .16” .16” Bag Qty 10 10 5 4 1 .09” .09” .12” .16” .16” 1 1 1 1 1 48” Lengths 100 150” .220” .375” .500” .750” Each Piece WIRE MANAGEMENT Medium Wall Heat Shrink Tubing Suitable for a variety of low voltage electrical and mechanical applications, where lighter weight and greater flexibility are important Seals and protects cable splices and terminations High resistance to impact and abrasion 4’ Lengths have Thermoplastic Adhesive Liner for complete environmental protection and insulation Continuous operating temperature: -67°F to 230°F (-55oC to 110oC) Shrink temperature: 248°F (120oC) Rated for 600-2500V UL486D Black Color Diameter Cat Cable Before No. Range Length Shrinking 68112 12-6 AWG 4’ .40” 68114 8-1/0 AWG 4’ .75” 68116 2-4/0 AWG 4’ 1.10” 68118 4’ 1.30” 68120 3/0-400MCM 4’ 1.50” 68122 4’ 1.70” 68124 250-750MCM 4’ 2.05” 68126 4’ 2.75” 68128 800-1250MCM 4’ 3.50” 68130 1500-2500MCM 4’ 4.70” 68132 4’ 6.70” Diameter After Wall Each Shrinking Thickness Piece .15” .080” .22” .080” .40” .080” .40” .080” .50” .080” .50” .080” .75” .080” 1.00” .080” 1.18” .095” 1.57” .105” 2.30” .110” Rolls 68142 68144 68146 68148 68150 68152 68154 68156 68158 12-6 8-1/0 2-4/0 3/0-400 250-750 800-1250 1500-2500 50’ 25’ 25’ 50’ 50’ 25’ 25’ 50’ 25’ .40” .75” 1.10” 1.30” 1.50” 1.70” 3.50” 4.70” 6.70” .15” .22” .40” .40” .50” .50” 1.18” 1.57” 2.30” .080” .080” .080” .080” .080” .080” .095” .105” .110” Heavy Wall Heat Shrink Tubing Provides maximum reliability for insulating and protection of cable joints and terminations Withstands severe mechanical requirements of U.R.D., submersible and direct burial installations High impact, abrasion, corrosion and chemical resistance Rated for 600-2500V, 90oC continuous use 4’ Lengths have Thermoplastic Adhesive Liner provides complete environmental protection and insulation Meets: UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guide Numbers 2.4, 2.5, ICEA and NEMA insulation thickness requirements Continuous operating temperature: -67°F to 230°F (-55oC to 110oC) Shrink temperature: 248°F (120oC) Heavy Wall holds better mechanically & has better underground protection than medium wall Black color Cat No. 68162 68164 68166 68168 68170 68172 68174 68176 68178 Cable Range #14-#10 #8-#6 #6-#2 #1-#3/0 2/0-350 250-500 600-1000 800-1250 1500-2500 Length 4’ 4’ 4’ 4’ 4’ 4’ 4’ 4’ 4’ Diameter Before Shrinking 0.35” 0.51” 0.75” 1.10” 1.50” 2.00” 2.70” 3.54” 4.72” 68182 68186 68188 68190 68192 68194 68196 68198 #14-#10 #6-#2 #1-#3/0 2/0-350 250-500 600-1000 800-1250 1500-2500 25’ 25’ 25’ 25’ 25’ 25’ 25’ 25’ 0.35” 0.75” 1.10” 1.50” 2.00” 2.70” 3.54” 4.72” Diameter After Shrinking 0.12” 0.16” 0.24” 0.35” 0.47” 0.63” 0.87” 1.18” 1.57” Wall Thickness .07” .09” .09” .12” .16” .16” .16” .16” .17” 0.12” 0.24” 0.35” 0.47” 0.63” 0.87” 1.18” 1.57” .07” .09” .12” .16” .16” .16” .16” .17” Each Piece Rolls 101 WIRE MANAGEMENT Heat Shrink End Caps Simple & effective method for sealing cable ends, pipe, conduit or similar items Superior resistance to weathering, moisture contamination, adverse environmental conditions & common fluid solvents Adhesive liner provides complete environmental protection and insulation Heat indicating lines Valved end cap available for pressurized applications Continuous operating temperature from -67°F to 230°F (-55oC to 110oC) Rated from 600/1,000V 194°F (90oC) continuous use UL486D, Shrink temperature of 248°F (120oC) Black Color Cat No. 68232 68234 Cable Range 2-4/0 300-1000MCM Length 3.5 4.0 Diameter Before Shrinking .75” 1.30” Diameter After Shrinking .22” .40” Wall Thickness .08” .08” 68236 500-1500MCM 4.5 1.50” .50” .08” 68238 900-2500MCM 4.5 2.05” .75” .08” 68240 2000-2500MCM 5.0 2.75” 1.00” .08” Each Heat Shrink Cable Repair Sleeve Recommended for above ground use A superior wraparound insulation product that easily installs in repair and splice applications providing excellent insulation and protection for cable jackets Shut down of system not required for repair High shrink ratio covers even irregular shapes Better split resistance than competitive products Simple RAIL-LESS installation with clamshell design Thermoplastic Adhesive Liner provides complete environmental protection and insulation Meets ICEA and NEMA insulation thickness specification Continuous operating temperature: -67°F to 230°F (-55oC to 110oC) Shrink temperature: 248°F (120oC) Cat No. Cable Range Length Diameter Before Shrinking Diameter After Shrinking Wall Thickness 68212 68214 68216 68218 68220 8-3/0 2/0-400 400-1000 1000-2000 Multiple Conductor 36” 36” 36” 36” 36” 1.20” 1.80” 2.70” 3.60” 4.95” 0.24” 0.60” 0.95” 1.30” 1.65” .08” .08” .08” .08” .08” 68222 Multiple Conductor 36” 6.75” 2.50” .08” Each Piece Heat Gun Specially designed for Heat Shrink Tubing Retractable Fixing Wings to Steady on Table or Ground Thermostat Protection 6 Foot Cord 2 Heat Settings - Hi: 1120°F, Lo: 850°F 125V, 1500W Cat No. 54690 102 Each WIRE MANAGEMENT UF Direct Burial Splice Kits Labor savings - simplifies splicing UF cable by obsolescing messy multi part splicing kits 600 Volt maximum 221oF (105oC) rating Provides a reliable, moisture proof electrical connection for UF cable 14/3 or 12/3 minimum to 8/3 maximum Seal with heat gun or torch Kit comes complete with one 4-position brass connector and one 8” piece of water impervious adhesive/sealant heat shrink tubing UL486D Listed “Submersible” & Raintight” Cat No. Description 67000 14-8 AWG UF Direct Burial Splice Kit Per Kit UF Direct Burial Stretcher Kits Eliminates the need for using two connectors and a short piece of cable when repairing damaged UF cable 600 Volt maximum 221oF (105oC) rating Provides a reliable, moisture proof electrical connection for UF cable 14/3 or 12/3 minimum to 8/3 maximum Seal with heat gun or torch Kit comes complete with 11-1/2” connector and one 20” piece of water impervious adhesive/sealant heat shrink tubing UL486D Listed “Submersible” & Raintight” Cat No. Description 67001 14-8 AWG UF Direct Burial Stretcher Splice Kit Per Kit Dual Rated Splice Kits 67002 67004 67005 67006 Eliminates expensive crimping tools when splicing aluminum or copper conductors for Direct Burial Kit comes complete with one mechanical connector and one piece of heat shrink tubing Popular splicing applications would be for repair and/or extending type USE cable Seal with heat gun or torch UL Listed Components 600 Volt maximum 221oF (105oC) rating Fig. 1 Fig. 2 Cat No. Figure Description 67002 1 8-2 AWG Dual Rated Butt Splice 67004 1 6-1/0 AWG Dual Rated Butt Splice 67005 1 1/0-250MCM AWG Dual Rated Butt Splice 67006 2 1/0-250MCM AWG Dual Rated Butt Splice Per Kit 103 WIRE MANAGEMENT Channel Nut No Spring Channel Nut Short Spring For all channel sizes (17404 can’t be used with 13/16” & 1” channel) Zinc Electroplate Finish For 13/16” & 1” channel Zinc Electroplate Finish Cat No. TH T 17400 17402 17404 1/4”-20 3/8”-16 1/2”-13 .25” .37” .50” Box Qty Each 100 100 100 Cat No. TH T Box Qty 17412 17420 1/4”-20 3/8”-16 .25” .37” 100 100 Channel Nut Regular Spring For 1-3/8” & 1-5/8” channel Zinc Electroplate Finish Each Cat No. TH T Box Qty 17430 17438 17442 1/4”-20 3/8”-16 1/2”-13 .25” .37” .50” 100 100 100 Malleable Iron Rod Support Beam Clamp Malleable Iron Universal Beam Clamp Maximum flange thickness of 1/2” Zinc Electroplate Finish Maximum flange thickness of 5/8” The threaded hole on the back side of the clamp is not load rated Zinc Electroplate Finish Cat Rod Set Screw Max No. Size (RS) Size Load (W) Cat Rod Max Load Max Load Box No. Size (RS) (W1) (W2) Qty 17486 1/4”-20 100 lbs. 250 lbs. 100 Each 104 Box Qty Each 335 lbs. 1.18” 1.38” 1.38” 100 1/2”-13 525 lbs. 2.06” 1.87” 1.75” 50 17476 1/2”-13 1/2”-13 750 lbs. 2.50” 2.37” 2.18” 25 For 2-7/16” & 3-1/4” Channel Design load 1200lbs. when used in pairs Zinc Electroplate Finish Cat No. 17464 H 5/16”-18 For 13/16” & 1-5/8” Channel Design load 1200lbs. when used in pairs Zinc Electroplate Finish Each L 17474 3/8”-16 Strut to Beam Clamp with Square U-Bolt Box Qty 25 B 17472 1/4”-20 Strut to Beam Clamp with Square U-Bolt Cat No. 17462 Each Box Qty 25 Each Beam Clamp Torque Values For beam clamps or other applications the following torque values from Manufacturer’s Standardization Society (MSS) SP-69 are recommended unless otherwise specified. In. lb. 40 Torque ft. lb. 3.3 Nm 4.5 3/8” 60 5.0 6.8 1/2” 125 10.4 14.1 Thread Size 1/4” WIRE MANAGEMENT Rigid Strut Clamp Zinc Electroplate Finish Cat No. 17514 Pipe Size (Inch) 1/2” O.D. (Inch) 0.840” Design Load (lbs) 400 Box Qty 100 17515 3/4” 1.050” 600 100 17516 1” 1.315” 600 100 17517 1-1/4” 1.660” 600 50 17518 1-1/2” 1.900” 800 50 17519 2” 2.375” 800 50 17520 2-1/2” 2.875” 800 50 17521 3” 3.500” 800 25 17522 3-1/2” 4.000” 1000 25 17523 4” 4.500” 1000 25 17524 5” 5.562” 1000 25 17525 6” 6.625” 1000 25 17526 8” 8.625” 1000 25 Each Universal Strut Clamp These clamps are designed to fit both pipe (rigid conduit) and thin walled tubing (EMT) in the corresponding sizes Zinc Electroplate Finish Cat No. 17532 17533 Pipe Size (Inch) 1/2” 3/4” O.D. (Inch) 0.773” 0.986” Design Load (lbs) 400 600 Box Qty 100 100 17534 1’ 1.239” 600 100 17535 1-1/4” 1.585” 600 50 17536 1-1/2” 1.820” 800 50 17537 2” 2.286” 800 50 Each EMT Strut Clamp Zinc Electroplate Finish Cat No. 17542 Pipe Size (Inch) 1/2” O.D. (Inch) 0.706” Design Load (lbs) 400 Box Qty 100 17543 3/4” 0.922” 400 100 100 17544 1’ 1.163” 600 17545 1-1/4” 1.510” 600 50 17546 1-1/2” 1.740” 800 50 17547 2” 2.197” 800 50 Each 105 WIRE MANAGEMENT Steel has Zinc Electroplate Finish 1-5/8” wide x 1/4” thick. Holes are 9/16” diameter, 13/16” center to edge on 1-7/16” centers Square Washer Cat No. 17612 17616 17618 Bolt Size 1/4” 3/8” 1/2” Hole Box Size Qty Each 5/16” 100 7/16” 100 9/16” 100 2 Hole Splice Plate Cat No. 17622 2 Hole Corner Angle Cat No. 17628 Box Qty 50 Each Box Qty 50 Each 2 Hole Cross Corner Angle Cat No. 17630 Box Qty 50 Each Strut Fitting Torque Values 3 Hole Splice Plate Cat No. 17624 Box Qty 25 Each 3 Hole Corner Plate Cat No. 17632 Box Qty 25 Each 4 Hole Tee Plate 4 Hole Splice Plate Cat No. 17626 Box Qty 25 Each 4 Hole 3 Way Corner Angle Cat No. 17634 Box Qty 25 Each 2 Hole Open 45° Corner Angle The following are the torque values used for determining the load ratings of fittings when attached to channel framing as specified in the Metal Framing Manufacturers Association (MFMA) Standard #2. 106 Torque Thread Size 1/4” In. lb. 72 ft. lb. 6 Nm 8.1 3/8” 228 19 25.8 1/2” 600 50 67.8 Cat No. 17636 Box Qty 20 Each Cat No. 17638 Box Qty 25 Each WIRE MANAGEMENT Hinged Fluorescent Fixture Hanger Hinged Fluorescent Fixture Hanger 1-5/8” Channel 9/16” Hole 3-1/4” Channel 9/16”Hole May be used as a channel hanger May be used as a channel hanger (1/4” x 3/4” Carriage Bolt w/ 1/4” Wing nut required) (1/4” x 3/4” Carriage Bolt w/ 1/4” Wing nut required) Maximum loading 120 lbs. Zinc Electroplate Finish Maximum loading 120 lbs. Zinc Electroplate Finish Cat No. Box Qty 17652 20 Each Cat No. Box Qty 17654 10 Each Plastic White End Caps Cat No. 17682 Channel Used with 13/16” Box Qty 100 17684 1-5/8” 100 Each Post Base Single Channel 2 Hole Standard 3-1/2” Post Base Single Channel 4 Hole Standard 3-1/2” Post Base Single Channel 4 Hole Square 3-1/2” Zinc Electroplate Finish Zinc Electroplate Finish Zinc Electroplate Finish Cat No. Box Qty 17450 5 Each Cat No. Box Qty 17452 5 Each Cat No. Box Qty 17454 5 Each Swivel Male - Female Swivel Male Zinc Electroplate Finish Zinc Electroplate Finish Cat Design Box RS TH L Ea No. Load Qty 17666 3/8”-16 3/8”-16 2-3/4” 620 lbs 50 Cat Design Box RS L R Ea No. Load Qty 17670 3/8”-16 1-3/4” 1/4” 620 lbs 50 Cat Design Box RS L R No. Load Qty 17662 3/8”-16 1-3/4” 1/4” 620 lbs 50 17668 1/2”-13 1/2” -13 17672 1/2”-13 17664 1/2”-13 3” 1150 lbs 50 2” 3/8” 1150 lbs 50 Swivel Female Zinc Electroplate Finish 2” 3/8” 1150 lbs 50 107 WIRE MANAGEMENT Spring Steel Beam Clamps Can be used to suspend boxes, fixtures & bridle rings to beam flanges 1/8” to 3/4” thick Ultimate Static Load Limit: - 75 or 100 lbs. (see illustration) NOTE: Static load limits cannot be combined Cat No. Flange Thickness Box Qty 18012 18014 1/8”-1/4” 5/16-1/2” Each 100 100 Spring Steel Beam Clampss Fast installation; fits beam flange to 1/2” Used with 1/4” and 3/8” threaded rod, “S” hooks, conduit hangers, electrical boxes, and #10-24 or 1/4”-20 bridle rings Static Load Capacity: 100 lbs. Tapping 1/4”-20 bottom & back Also #10-24 tapping on back Cat No. Flange Thickness Drop Rod Box Qty Each 18016 Up to 1/2” thick 1/4”-3/8” 100 Spring Steel Flange Beam Clamps Installed with hammer on bulb tees and beams Static Load Capacity of 200 lbs Clearance for 1/4” bolt in tab Cat No. 18018 18020 Flange Thickness 1/8”-1/4” 5/16”-1/2” Box Qty 100 100 Each Spring Steel Twist On T-Bar Hanger Supports electrical fixtures to T-Bar 15/16” wide Assembled with 1” OD wing nut washer 1/4”-20 stud 5/8” long with wing nut washer Cat No. Box Qty 18022 100 Each Box Stabilizer Support Box Support for 2-1/2”, 3-1/2” & 4” wood or metal studs Screw attached support for electrical boxes Made from pre-galvanized steel Cat No. Box Qty 18052 100 Each Box To T-Bar Fastener Snap-on 24” span box hanger with dual height adjustment allows flush or 3/4” offset mount 1 BBC mounting clip with screw included Zinc plated steel with spring steel hardware included 108108 Cat No. Box Qty 18054 100 Each WIRE MANAGEMENT Spring Steel Conduit Clips No fastener required Ultimate Static Load Limit: 100 lbs. vertical position 25 lbs. horizontal position Cat No. Fits Conduit Box Qty 18024 1/2”, 3/4” 100 Each Spring Steel Cable Clips Clip for MC, AC, or BX. Supports cable from #12 to #8 wire in horizontal or vertical position. OD’s from .433 to .535 NOTE: These products are designed for positioning only. No load rating #18028 cULus Listed 18026 18028 Cable Size Cat No. for #12 Wire Cat No. for #10 Wire Cat No. for #8 & #9 Wire 14-2 Cable 14-3 Cable Box Qty 18026 18026 18026 100 18026 18026 18026 100 12-2 Cable 18026 18026 18026 100 12-3 Cable 18026 18028 18028 100 Each Spring Steel Conduit Fast Support Clips Supports conduit & all types of cable from rods or flanges 18028 18030 Conduit Size Cat No. for #10 & #12 Wire Cat No. for #8 & #9 Wire 3/16” to 1/4” Rod 1/2” EMT 18028 18028 18028 Box Each Qty 100 1/2” RIGID 18028 18030 18030 100 3/4” EMT 18030 18030 18030 100 3/4” RIGID 18030 18030 100 Conduit Cat No. for Cat No. for Cat No. for Box Each Size 1/8”-1/4” Flange 3/16”-3/8” Flange 5/16”-3/8” Flange Qty 1/2” EMT 18028 18030 18030 100 1/2” RIGID 18030 3/4” EMT 18030 18030 100 100 109 WIRE MANAGEMENT Spring Steel Multi-Function Clip Attaches conduit or boxes to flanges, wire or rod Fits 1/8” to 3/8” flanges Attaches to #12 wire through 3/8” rod Attaches #10-24 or 1/4”-20 Threaded Bridle Rings (position only) Cat No. Box Qty 18048 100 Each Spring Steel Flange Mount Conduit Clip Assembly Suspends conduit from bottom of beam Will pivot 360 degrees Installs with hammer only Ultimate Static Load Limit: 75 lbs. Bottom Mount Cat No. Flange Fits Conduit Box Qty 18050 1/8”-1/4” 1/2” & 3/4” 100 Each Cable Support J Hooks Cost effective alternative to expensive cable tray Accommodates Category 5, fiber-optic and Interduct Wide base support provides support without stress to sensitive voice/data cables Continuous wide-base radius supports natural curve of cable, eliminating kinking, bending and crimping Cable wire retainer is supplied with every part Unique design eliminates the need for attachment plate when stacking Can be attached to a wide variety of structures using beam clamps, clips and many other components Cat No. Description Box Qty 18056 2” J Hook 50 Each Cable Support Bridle Rings Cost effective alternative to expensive cable tray Wide surface saddle provides support without stress for Category 5, fiber-optic, and other sensitive voice/datacom cables Mechanical Thread 110 Cat No. Saddle Ass’y Description Box Qty 18058 2” Bridle Ring w/Saddle 50 18060 4” Bridle Ring w/Saddle 50 Each WIRING DEVICES Toggle Switches Large head combination screws for quick wiring Easy-access green hex head ground screw Copper Only UL listed Steel mounting strap, zinc-plated for corrosion resistance Washer-type break-off plaster ear for best flush alignment Captive mounting screws Back and side wiring for easy installation Commercial Single Pole Toggle Switch 20A, 120/277V back & side wire Toggle Switch 15A 120/277V back & side wire Cat No. Color Box Qty Case Qty Each Single Pole 82010 Ivory 82011 White 82012 Brown 82013 Almond 10 10 10 10 200 200 200 200 Cat No. Color Box Qty Case Qty 82020 Ivory 10 200 82021 White 10 200 Lighted Clear Toggle Quiet Switch 15A, 120V back & side wire 3 Way 82030 82031 Ivory White 10 10 200 200 82032 Brown 10 200 82033 Almond 10 200 Cat No. Color Box Qty Case Qty Each 82040 Ivory 10 200 82041 White 10 200 Single Pole Toggle Switch Without Ears 15A, 120V back & side wire Switch is lit when turned off Cat No. Decorator Switch 15A, 120/277V back & side wire Each 4-Way Toggle Switch 15A 120/277V back & side wire Type 82045 Single Pole 82046 3 Way Box Qty Case Qty Ea 10 10 200 200 Single Pole Double Switch 15A 120V/277V back & side wire Cat No. Color Box Qty Case Qty Each 82048 Black 10 200 Combination Single Pole Switch and Receptacle 15A, 125V back & side wire Cat No. Color Box Qty Case Qty Each Single Pole 82050 Ivory 82051 White 82052 Brown 82053 Almond 10 10 10 10 200 200 200 200 Single Pole Lighted (glow when off) 82285 82286 Ivory White 10 10 200 200 82060 82061 Ivory White 10 10 200 200 82062 Brown 10 200 82063 Almond 10 200 3 Way 3 Way Lighted 82290 82291 Ivory White 82070 82071 Ivory White 10 10 200 200 Cat No. Color Box Qty Case Qty Each 82090 Ivory 10 200 82091 White 10 200 Garbage Disposal Decorator Switch Momentary Contact 15A, 120/277V back & side wire SPDT On-Off-(On) Cat No. Color Box Qty Case Qty Each 82100 Ivory 10 200 82101 White 10 200 82103 Almond 10 200 Cat No. Color Box Qty Case Qty Each 82175 Ivory 10 200 82176 White 10 200 Single Pole Switch & Pilot Light 15A, 120V back & side wire Cat No. Color Box Qty Case Qty 82095 Ivory 10 200 82096 White 10 200 Each 4 Way 10 10 200 200 Single Pole 20A 120/277V 82080 82081 Ivory White 10 10 200 200 111 WIRING DEVICES Straight Blade Receptacles Captive mounting screws Large head combination screws for quick wiring Back and side wiring for easy installation UL listed Shallow design for maximum wiring room Easy-access green hex head ground screw Washer-type break-off plaster ear for best flush alignment Commercial Duplex Receptacle Self Ground 2 pole, 3 wire 15A, 125V side wire Standard Duplex Receptacle 2 pole, 3 wire 15A, 125V back & side wire Tamperproof Standard Duplex Receptacle 2 pole, 3 wire 15A, 125V back & side wire Cat No. Color Box Qty Case Qty Each 82120 Ivory 82121 White 82122 Brown 82123 Almond 10 10 10 10 200 200 200 200 Cat No. Color Box Qty Case Qty Each 82140 Ivory 10 200 82141 White 10 200 82142 Brown 10 200 Decorator Duplex Receptacle Self Grounding 2 pole, 3 wire 15A, 125V back & side wire Cat No. Color Box Qty Case Qty Each 82015 Ivory 82016 White 82017 Brown 82018 Almond 10 10 10 10 200 200 200 200 Cat No. 82150 82151 82152 82153 Color Box Qty Case Qty Each Ivory 10 200 White 10 200 Brown 10 200 Almond 10 200 Ivory White 82233 Orange Cat No. Color Box Qty Case Qty Each 15 Amp 125 Volt 81910 Ivory 10 200 81911 White 10 200 81914 Orange 10 200 20 Amp 125 Volt 81915 Ivory 10 200 81916 White 10 200 81919 Orange 10 200 Ivory White 82238 Orange 112 Hospital Grade Duplex Receptacle Self Grounding 2 pole, 3 wire back & side wire Cat No. Color Box Qty Case Qty Each 15 Amp 125 Volt 82250 Ivory 10 200 82251 White 10 200 82253 Red 10 200 20 Amp 125 Volt 82170 Ivory 10 200 82171 White 10 200 82173 Red 10 200 15 Amp 250 Volt 15 Amp 250 Volt 10 10 200 200 81920 81921 10 200 81924 Orange 20 Amp 250 Volt 82235 82236 Cat No. Color Box Qty Case Qty Each 81960 Ivory 10 200 81961 White 10 200 81963 Almond 10 200 Decorator Isolated Ground Duplex Receptacle Self Grounding 2 pole, 3 wire back & side wire 15 Amp 250 Volt 82230 82231 Tamperproof Decorator Duplex Receptacle Self Grounding 2 pole, 3 wire 15A, 125V back & side wire Commercial Duplex Receptacle Self Grounding 2 pole, 3 wire 20A, 125V side wire Isolated Ground Duplex Receptacle Self Grounding 2 pole, 3 wire back & side wire Cat No. Color Box Qty Case Qty Each 15 Amp 125 Volt 82225 Ivory 10 200 82226 White 10 200 82228 Orange 10 200 20 Amp 125 Volt 82160 Ivory 10 200 82161 White 10 200 82164 Orange 10 200 Cat No. Color Box Qty Case Qty Each 81950 Ivory 10 200 81951 White 10 200 81953 Almond 10 200 Ivory White 10 10 200 200 82255 82256 Ivory White 10 10 200 200 10 200 82258 Red 10 200 20 Amp 250 Volt 20 Amp 250 Volt 10 10 200 200 81925 81926 10 200 81929 Orange Ivory White 10 10 200 200 82260 82261 Ivory White 10 10 200 200 10 200 82263 Red 10 200 WIRING DEVICES Industrial Grade Decorator Duplex Receptacle Self Grounding 2 pole, 3 wire back & side wire Industrial Grade Duplex Receptacle Self Grounding 2 pole, 3 wire back & side wire Cat No. Color Box Qty Case Qty Each 15 Amp 125 Volt 82195 Ivory 10 200 82196 White 10 200 20 Amp 125 Volt 82130 82131 Ivory White 82200 82201 Ivory White 82205 82206 Ivory White 10 10 200 200 Cat No. Color Box Qty Case Qty Each 15 Amp 125 Volt 82210 Ivory 10 200 82211 White 10 200 20 Amp 125 Volt 82180 82181 Ivory White 82215 82216 Ivory White 82220 82221 Ivory White 15 Amp 250 Volt 10 10 200 200 15 Amp 250 Volt 200 200 20 Amp 250 Volt 10 10 10 10 10 10 10 10 Cat No. Color Box Qty Case Qty 15 Amp 125 Volt 82135 Ivory 10 200 82136 White 10 200 Each 20 Amp 125 Volt 82155 Ivory 10 200 82156 White 10 200 15 Amp 250 Volt 82240 Ivory 10 200 82241 White 10 200 200 200 20 Amp 250 Volt 200 200 Industrial Grade Single Receptacle 2 pole, 3 wire side wire 20 Amp 250 Volt 82245 Ivory 10 200 82246 White 10 200 200 200 Flush Range Receptacle 50A, 125/250V 4 wire One Gang Black Color Flush Dryer Receptacle 30A, 125/250V 4 wire One Gang Cat No. Color Box Qty Case Qty Each 82521 White 10 200 Cat No. 82522 Black 10 200 82526 One Gang Metal Range and Dryer Cover 2.125 Diameter 430 Stainless Cat No. Color Box Qty Case Qty 83480 Stainless 25 200 83482 White 25 200 83483 Ivory 25 200 Box Qty Case Qty 10 Each 200 Commercial Grade Decorator Combination Devices Elegant design provides multiple controls in a single-gang wall box All devices have grounding terminals Fit standard wall boxes Ea Fig 1 Fig 2 Fig 3 Cat. No. 2 Gang Metal Range and Dryer Cover 2.125 Diameter 430 Stainless Cat No. Color Box Qty Case Qty Ea 83485 Stainless 25 200 83487 White 25 200 83488 Ivory 25 200 Color Fig. Box Qty. Case Qty. Each Triple Rocker Switch 15 Amp Push-In only 120/277V AC 81970 Ivory 1 10 200 81971 White 1 10 200 81973 Almond 1 10 200 Double Rocker Switch 15 Amp Side Wired Only 120/277V AC 81980 Ivory 2 10 200 81981 White 2 10 200 81983 Almond 2 10 200 Single Pole Switch/Receptacle 15 Amp 120V Switch 15 Amp 125V Receptacle 81990 81991 81993 Ivory White Almond 3 3 3 10 10 10 200 200 200 113 WIRING DEVICES Ground Fault Circuit Interrupter with Wallplate This device replaces a conventional outlet. Should someone come in contact with a live (hot) wire, this GFCI will detect a current leakage as little as 5 millamps and will shut the power off almost immediately (1/40 of a second). The National Electrical Code (NEC) requires the use of GFCI outlets in kitchens, bathrooms, garages, basements and near swimming pools. Cat No. 2-pole, 3-wire grounding duplex GFCI receptacle 125V AC only 15A at outlet 20A feed-through With LED GFCI Color Reset & Test Button Color Receptacle Feed-Thorugh Case Qty 82330 Ivory Ivory 15 AMPS 20 AMPS 50 82331 White White 15 AMPS 20 AMPS 50 82332 Brown Brown 15 AMPS 20 AMPS 50 82333 Light Almond Light Almond 15 AMPS 20 AMPS 50 82334 Black Black 15 AMPS 20 AMPS 50 82340 Ivory Ivory 20 AMPS 20 AMPS 50 82341 82342 White Brown White Brown 20 AMPS 20 AMPS 20 AMPS 20 AMPS 50 50 82343 Light Almond Light Almond 20 AMPS 20 AMPS 50 82344 Black Black 20AMPS 20 AMPS 50 Each Emergency Metal Switch Plates Decorator Screwless Snap-In Wallplates Red with silk screened white letters Screwless snap-in design gives smooth finish without recessed lines Decorator-compatible two piece kit allows easy retrofit to any decorator installation Virtually unbreakable thermoplastic Easy to snap-on Easy to clean & maintain attractive appearance 114 Cat. No. 80900 80901 80903 80905 80906 80908 80910 80911 80913 80915 80916 80918 80920 Gangs 1 1 1 2 2 2 3 3 3 4 4 4 5 Color Ivory White Almond Ivory White Almond Ivory White Almond Ivory White Almond Ivory Box Qty 25 25 25 25 25 25 10 10 10 10 10 10 10 Case Qty 200 200 200 200 200 200 100 100 100 100 100 100 100 80921 80923 5 5 White Almond 10 10 100 100 Each Cat No. Type Size Box Case Qty Qty Each 83490 83491 83492 83495 Oil Oil Oil Gas Utility 1 Gang 4” Raised Utility 10 10 10 10 100 100 100 100 83496 Gas 1 Gang 10 100 83497 Gas 4” Raised 10 100 WIRING DEVICES Lexan Wall Plates Highly resistant to impact, abrasion, oil, acids and discoloration Ideal for use in high-abuse areas Smooth, easy to clean surface Round on edges to prevent injury and wall damage Supplied with color matching painted metal mounting screws Mounting Screws individually wrapped in a small plastic bag to protect plate from scratches Specification Grade - meets all current Federal Specifications Conform to NEMA & ANSI standards Flammability rating UL94V-2 1 Gang Toggle Switch Cat No. Color 81010 Ivory 81011 White 81012 Brown 81013 Almond Box Qty Case Qty Each 25 200 25 200 25 200 25 200 4 Gang Toggle Switch Cat No. Color 81040 Ivory 81041 White 81042 Brown 81043 Almond Box Qty Case Qty Each 10 200 10 200 10 200 10 200 1 Gang Decorator/GFCI Cat No. Color Box Qty Case Qty Each 81110 Ivory 25 200 81111 White 25 200 81112 Brown 25 200 81113 Almond 25 200 2 Gang Toggle Switch 3 Gang Toggle Switch Cat No. Color Box Qty Case Qty Each 81020 Ivory 25 200 81021 White 25 200 81022 Brown 25 200 81023 Almond 25 200 Cat No. Color Box Qty Case Qty Each 81030 Ivory 10 100 81031 White 10 100 81032 Brown 10 100 81033 Almond 10 100 5 Gang Toggle Switch 6 Gang Toggle Switch Cat No. Color Box Qty Case Qty Each 81050 Ivory 10 200 81051 White 10 200 81052 Brown 10 200 81053 Almond 10 200 Cat No. Color Box Qty Case Qty Each 81060 Ivory 10 200 81061 White 10 200 81062 Brown 10 200 81063 Almond 10 200 2 Gang Decorator/GFCI 3 Gang Decorator/GFCI Cat No. 81120 81121 81122 Color Ivory White Brown 81123 Almond Box Qty Case Qty Each 25 200 25 200 25 200 25 200 Cat No. Color Box Qty Case Qty Each 81130 Ivory 10 200 81131 White 10 200 81132 Brown 10 200 81133 Almond 10 200 115 WIRING DEVICES Lexan Wall Plates 4 Gang Decorator/GFCI 5 Gang Decorator/GFCI 6 Gang Decorator/GFCI Cat No. Color Box Qty Case Qty Each 81140 Ivory 10 200 81141 White 10 200 81142 Brown 10 200 81143 Almond 10 200 Cat No. Color Box Qty Case Qty Each 81150 Ivory 10 200 81151 White 10 200 81152 Brown 10 200 81153 Almond 10 200 Cat No. Color Box Qty Case Qty Each 81160 Ivory 10 200 81161 White 10 200 81162 Brown 10 200 81163 Almond 10 200 2 Gang 1 Toggle, 1 Blank 2 Gang 1 GFCI, 1 Blank 2 Gang 1 Duplex, 1 Blank Cat No. Color Box Qty Case Qty Each 81210 Ivory 25 200 81211 White 25 200 81212 Brown 25 200 81213 Almond 25 200 Cat No. Color Box Qty Case Qty Each 81220 Ivory 25 200 81221 White 25 200 81222 Brown 25 200 81223 Almond 25 200 Cat No. Color Box Qty Case Qty Each 81230 Ivory 25 200 81231 White 25 200 81232 Brown 25 200 81233 Almond 25 200 2 Gang 1 Toggle, 1 GFCI 2 Gang 1 GFCI, 1 Duplex 3 Gang 1 Duplex, 2 Toggle Cat No. Color Box Qty Case Qty Each 81240 Ivory 25 200 81241 White 25 200 81242 Brown 25 200 81243 Almond 25 200 Cat No. Color Box Qty Case Qty Each 81250 Ivory 25 200 81251 White 25 200 81252 Brown 25 200 81253 Almond 25 200 Cat No. Color Box Qty Case Qty Each 81260 Ivory 10 200 81261 White 10 200 81262 Brown 10 200 81263 Almond 10 200 2 Gang 1 Duplex, 1 Single 2 Gang 1 Duplex, 1 Toggle 3 Gang 2 Toggle, 1 GFCI 1.406” Diameter 116 Cat No. Color Box Qty Case Qty 81685 Ivory 25 200 81686 White 25 200 81687 Brown 25 200 81688 Almond 25 200 Cat No. Color Box Qty Case Qty Each 81290 Ivory 25 200 81291 White 25 200 81292 Brown 25 200 81293 Almond 25 200 Cat No. Color Box Qty Case Qty Each 81310 Ivory 10 200 81311 White 10 200 81312 Brown 10 200 81313 Almond 10 200 WIRING DEVICES Lexan Wall Plates 1 Gang Duplex Receptacle 1 Gang Blank 1 Gang Single Receptacle 1.406 Diameter Cat No. Color 81410 81411 81412 81413 Ivory White Brown Almond Box Qty Case Qty Each 25 25 25 25 200 200 200 200 Cat No. Color Box Qty Case Qty Each 81510 Ivory 25 200 81511 White 25 200 81512 Brown 25 200 81513 Almond 25 200 2 Gang Duplex Receptacle Cat No. 81610 81611 Color Ivory White 81612 81613 Brown Almond Box Qty Case Qty Each 25 200 25 200 25 25 200 200 2 Gang Single Receptacle 2 Gang Blank 1.406 Diameter Cat No. Color Box Qty Case Qty Each 81420 Ivory 25 200 81421 White 25 200 81422 Brown 25 200 81423 Almond 25 200 Cat No. Color 81520 Ivory 81521 White 81522 Brown 81523 Almond 4 Gang Duplex Receptacle Cat No. Color 81440 Ivory 81441 White 81442 Brown 81443 Almond Box Qty Case Qty Each 10 200 10 200 10 200 10 200 Cat No. Color Box Qty Case Qty Each 81620 Ivory 25 200 81621 White 25 200 81622 Brown 25 200 81623 Almond 25 200 1 Gang Cable 3 Gang Duplex Receptacle Cat No. Color Box Qty Case Qty Each 81430 Ivory 10 200 81431 White 10 200 81432 Brown 10 200 81433 Almond 10 200 Box Qty Case Qty Each 25 200 25 200 25 200 25 200 Cat No. 81630 81631 81632 Color Ivory White Brown Hole Dia. .406 .406 .406 81633 81670 81671 81672 81673 Almond Ivory White Brown Almond .406 .625 .625 .625 .625 Box Case Qty Qty Each 25 200 25 200 25 200 25 25 25 25 25 200 200 200 200 200 117 WIRING DEVICES Lexan Wall Plates - Midsize & Oversize 1 Gang Toggle Switch 2 Gang Toggle Switch Mid-Size Mid-Size Cat No. 81710 81711 81712 81713 Color Box Qty Case Qty Each Ivory 25 200 White 25 200 Brown 25 200 Almond 25 200 1 Gang Toggle Switch Cat No. Color Box Qty Case Qty Each 81750 Ivory 25 200 81751 White 25 200 81752 Brown 25 200 81753 Almond 25 200 Over-Size Cat No. Color Box Qty Case Qty Each 81810 Ivory 25 200 81811 White 25 200 81812 Brown 25 200 81813 Almond 25 200 1 Gang Decorator/GFCI 2 Gang Decorator/GFCI 1 Gang Decorator/GFCI Mid-Size Mid-Size Over-Size Cat No. Color Box Qty Case Qty Each 81720 Ivory 25 200 81721 White 25 200 81722 Brown 25 200 81723 Almond 25 200 1 Gang Duplex Receptacle Cat No. Color Box Qty Case Qty Each 81770 Ivory 25 200 81771 White 25 200 81772 Brown 25 200 81773 Almond 25 2 Gang Duplex Receptacle Mid-Size Cat No. Color Box Qty Case Qty Each 81730 Ivory 81731 White 81732 Brown 81733 Almond 25 25 25 25 200 200 200 200 200 Cat No. 81820 81821 81822 81823 1 Gang Duplex Receptacle Over-Size Mid-Size Cat No. Color Box Qty Case Qty Each 81760 Ivory 25 200 81761 White 25 200 81762 Brown 25 200 81763 Almond 25 200 Cat No. 25 25 25 25 200 200 200 200 1 Gang Blank Mid-Size 118 Color Box Qty Case Qty Each 81830 Ivory 81831 White 81832 Brown 81833 Almond 1 Gang Blank Cat No. Color Box Qty Case Qty 81740 Ivory 25 200 81741 White 25 200 81742 Brown 25 200 81743 Almond 25 200 Color Box Qty Case Qty Each Ivory 25 200 White 25 200 Brown 25 200 Almond 25 200 Over-Size Cat No. 81840 81841 81842 81843 Color Box Qty Case Qty Each Ivory 25 200 White 25 200 Brown 25 200 Almond 25 200 WIRING DEVICES Stainless Steel Metal Wall Plates UL listed Provides extended life in abusive and corrosive environments Different surface finish available: semi-gloss Contemporary smooth finish and contoured edges enhance (white, ivory) and stainless steel installation appearance Smooth finish without recessed lines is easy to clean and maintain Made of stainless steel 430 attractive appearance 1 Gang Toggle Switch 1 Gang Decorator/GFCI 2 Gang 1 Toggle 1 Blank Cat No. Color Box Qty Case Qty Each 83010 Stainless 25 200 83012 White 25 200 83013 Ivory 25 200 Cat No. Color Box Qty Case Qty Each 83110 Stainless 25 200 83112 White 25 200 83113 Ivory 25 200 Cat No. Color Box Qty Case Qty Each 83410 Stainless 25 100 83412 White 25 100 83413 Ivory 25 100 2 Gang Toggle Switch 2 Gang Decorator/GFCI 2 Gang 1 Duplex 1 Toggle Cat No. Color Box Qty Case Qty Each 83020 Stainless 25 100 83022 White 25 100 83023 Ivory 25 100 Cat No. Color Box Qty Case Qty Each 83120 Stainless 25 100 83122 White 25 100 83123 Ivory 25 100 Cat No. Color Box Qty Case Qty Each 83420 Stainless 25 100 83422 White 25 100 83423 Ivory 25 100 3 Gang Toggle Switch 3 Gang Decorator/GFCI 2 Gang 1 Toggle 1 GFCI Cat No. Color Box Qty Case Qty Each 83030 Stainless 10 100 83032 White 10 100 83033 Ivory 10 100 Cat No. Color Box Qty Case Qty Each 83130 Stainless 10 100 83132 White 10 100 83133 Ivory 10 100 Cat No. Color Box Qty Case Qty Each 83430 Stainless 25 100 83432 White 25 100 83433 Ivory 25 100 4 Gang Toggle Switch 4 Gang Decorator/GFCI 2 Gang 1 GFCI 1 Duplex Cat No. Color Box Qty Case Qty Each 83040 Stainless 10 50 83042 White 10 50 83043 Ivory 10 50 Cat No. Color Box Qty Case Qty Each 83140 Stainless 10 50 83142 White 10 50 83143 Ivory 10 50 Cat No. Color Box Qty Case Qty 83440 Stainless 25 100 83442 White 25 100 83443 Ivory 25 100 119 WIRING DEVICES Stainless Steel Metal Wall Plates 1 Gang Duplex Receptacle 1 Gang Blank Cat No. Color Box Qty Case Qty Each 83210 Stainless 25 200 83212 White 25 200 83213 Ivory 25 200 Cat No. Color Box Qty Case Qty Each 83310 Stainless 25 200 83312 White 25 200 83313 Ivory 25 200 2 Gang Duplex Receptacle 2 Gang Blank 1 Gang Single Receptacle Cat No. Color Hole Dia Box Case Each Qty Qty 83445 Stainless 1.620 83447 White 1.620 83448 Ivory 1.620 25 25 25 200 200 200 83450 Stainless 1.406 25 200 83452 White 1.406 25 200 83453 Ivory 1.406 25 200 1 Gang Cable Cat No. Color Box Qty Case Qty Each 83220 Stainless 25 100 83222 White 25 100 83223 Ivory 25 100 Cat No. Color 83320 Stainless 83322 White 83323 Ivory Box Qty Case Qty Each 25 25 25 100 100 100 3 Gang Blank 3 Gang Duplex Receptacle Cat No. Color Box Qty Case Qty Each 83230 Stainless 10 100 83232 White 10 100 83233 Ivory 10 100 Cat No. Color Box Qty Case Qty Each 83330 Stainless 10 100 83332 White 10 100 83333 Ivory 10 100 4 Gang Duplex Receptacle 4 Gang Blank Cat Hole No. Color Dia 83455 Stainless .406 83457 White .406 83458 Ivory .406 83460 Stainless .625 25 200 83462 White .625 25 200 83463 Ivory .625 25 200 83465 Stainless .4375 25 200 83467 White .4375 25 200 83468 Ivory .4375 25 200 2 Gang Cable Cat No. 120 Cat No. Color Box Qty Case Qty 83240 Stainless 10 50 83242 White 10 50 83243 Ivory 10 50 Cat No. Color 83340 Stainless 83342 White 83343 Ivory Box Qty Case Qty Each 10 10 10 50 50 50 Box Case Qty Qty Each 25 200 25 200 25 200 Color Hole Box Case Dia Qty Qty Each 83470 Stainless 83472 White 83473 Ivory .625 .625 .625 25 25 25 100 100 100 83475 Stainless .406 25 100 83477 White .406 25 100 83478 Ivory .406 25 100 WIRING DEVICES Stainless Steel Wall Plates 2 Gang Single Receptacle 1 Gang 1 Phone, 1Cable 2 Gang 1 GFCI, 1 Blank 1.406” Diameter .374” & .177” Diameters Cat No. Color 83510 Stainless 83512 White 83513 Ivory Box Qty Case Qty Each 25 25 25 200 200 200 Cat No. Color 83520 Stainless 83522 White 83523 Ivory 2 Gang 1 Duplex, 1 Blank Box Qty Case Qty Each 25 25 25 200 200 200 2 Gang 1 Duplex, 1 Single Cat No. Color Box Qty Case Qty Each 83560 Stainless 83562 White 83563 Ivory 25 25 25 200 200 200 3 Gang 2 Toggle 1 GFCI 1.406” Diameter Cat No. Color 83540 Stainless 83542 White 83543 Ivory Box Qty Case Qty Each 25 25 25 200 200 200 Cat No. Color 83550 Stainless 83552 White 83553 Ivory 1 Gang Range/Dryer Cover Box Qty Case Qty Each 25 25 25 Color Box Qty Case Qty 2.125” Diameter Ea Cat No. Color 83480 Stainless 25 200 83482 White 25 200 83487 White 25 200 83483 Ivory 25 200 83488 Ivory 25 200 25 200 Color 83670 Stainless 83672 White 83673 Ivory Box Qty Case Qty Each 25 25 25 200 200 200 Box Qty Case Qty Each 10 10 10 200 200 200 Emergency Metal Switch Plates Red with silk screened white letters 2 Gang Power Outlet 2.465” Diameter Mid-Size Cat No. Color 83580 Stainless 83582 White 83583 Ivory Box Qty Case Qty Ea 83485 Stainless 2 Gang 1Toggle, 1 Duplex Cat No. 2 Gang Range/Dryer Cover 2.125” Diameter Cat No. 200 200 200 Cat No. Color 83505 Stainless 83507 White 83508 Ivory Box Qty Case Qty Each 25 25 25 200 200 200 Cat No. Type Size Box Case Qty Qty 83490 83491 83492 83495 Oil Oil Oil Gas Utility 1 Gang 4” Raised Utility 10 10 10 10 100 100 100 100 83496 Gas 1 Gang 10 100 83497 Gas 4” Raised 10 100 121 WIRING DEVICES Stainless Steel Wall Plates, Mid-size and Over-Size 1 Gang Blank 1 Gang Toggle Switch Mid-Size Cat No. Color Box Qty Case Qty Each 83610 Stainless 83612 White 83613 Ivory 25 25 25 200 200 200 Mid-Size Cat No. Color 83620 Stainless 83622 White 83623 Ivory 1 Gang Decorator/GFCI 1 Gang Duplex Receptacle Box Qty Case Qty Each 25 25 25 200 200 200 1 Gang Single Receptacle Mid-Size Mid-Size Cat No. Color 83630 Stainless 83632 White 83633 Ivory Box Qty Case Qty Each 25 25 25 200 200 200 2 Gang Toggle Switch Mid-Size Mid-Size 1.406” Diameter Cat No. Color Box Qty Case Qty Each 83640 Stainless 83642 White 83643 Ivory 25 25 25 Cat No. Color 83650 Stainless 83652 White 83653 Ivory 200 200 200 1 Gang Duplex Receptacle Box Qty Case Qty Each 25 25 25 1 Gang Toggle Switch Over-Size Cat No. Color 83710 Stainless 83712 White 83713 Ivory Box Qty Case Qty Each 25 25 25 1 Gang Decorator/GFCI Cat No. Color 83660 Stainless 83662 White 83663 Ivory Box Qty Case Qty Each 25 25 25 Cat No. Color Box Qty Case Qty Each 25 25 25 200 200 200 1 Gang Single Receptacle Over-Size Over-Size Cat No. Color 83730 Stainless 83732 White 83733 Ivory Box Qty Case Qty Each 25 25 25 122 Color 83740 Stainless 83742 White 83743 Ivory Box Qty Case Qty Over-Size 25 25 25 200 200 200 Cat No. Color 83750 Stainless 83752 White 83753 Ivory Box Qty Case Qty Each 25 25 25 200 200 200 200 200 200 1 Gang Phone/Cable Over-Size 1.406” Diameter Cat No. 200 200 200 1 Gang Duplex Receptacle Over-Size 83720 Stainless 83722 White 83723 Ivory 200 200 200 200 200 200 .625” Diameter Cat No. Color 83760 Stainless 83762 White 83763 Ivory Box Qty Case Qty Each 25 25 25 200 200 200 WIRING DEVICES Dimmers Fits standard wall box Wire leads provide for fast & easy assembly & wiring Suppresses Radio Frequency Interference (RFI) UL listed Decorator Style permits ganging with other decorative devices Rotary Dimmer Slide Dimmer 600 Watt Single Pole (turn off) 3-Way (push off) Includes Wallplate Cat No. 82710 82711 82713 82715 82716 82718 Color Case Qty Each Single Pole (turn off) Ivory 10 White 10 Almond 10 3-Way (push off) Ivory 10 White 10 Almond 10 700 Watt Blister Pack Wallplate not included Cat No. 82720 82721 82723 Color Case Qty Each Single Pole Ivory White Almond 10 10 10 Fluorescent slide Incandescent 120VAC 600W Ivory White Almond 3-Way Ivory White Almond Cat No. Color Box Qty Single Pole Single Pole 120V 700W 82780 Ivory 10 82781 White 10 82783 Almond 10 Three Way 120V 700W 82740 82741 82743 82785 82786 Ivory White 10 10 82745 82746 Ivory White 10 10 82788 Almond 10 82748 Almond 10 Ivory 10 White 10 Almond 10 Three Way Each 10 10 10 10 10 10 Touch Dimmer 600W Single Pole of use & precise adjustment of lighting levels Simple one-touch for ON at preset level or again for OFF, touch & hold for BRIGHT/DIM lighting control On/Off Switch Includes Wallplate Individually Boxed Individually Boxed Case Qty Single Pole Provides fingertip ease selected light levels Dimmer: Select light level with slider Includes Wallplate Each Color dimmer Also good for Box Qty Cat No. 82755 82756 82758 Switch: On/Off at Color 700 Watt On/Off Switch Includes Wallplate 82750 82751 82753 Fluorescent Dimmer Slide Dimmer & On/Off Switch Cat No. Slide Dimmer with Switch Blister Pack Wallplate not included Each Cat No. Color Case Qty 82770 82771 82773 Ivory White Almond 10 10 10 Each Single Pole Magnetic Low Voltage 82790 82791 Ivory White 10 10 82793 Almond 10 Three Way Magnetic Low Voltage 82795 82796 Ivory White 10 10 82798 Almond 10 123 WIRING DEVICES Smart Dimmers Full range dimming possible for up to 9 locations, install 1 smart dimmer and then add smart remotes On/Off switch Customizable delayed fade to off ranging from 10- Switch Tap on/off Dimmer Press rocker to raise or lower lights LED’S Show light level Infrared receiver Smart Dimmer Smart Remote Dimmer Smart Dimmers - Single Pole Cat No. 82810 82811 82813 82820 82821 82823 Watts 600 600 600 1000 1000 1000 Amps 5 5 5 8.33 8.33 8.33 Color Ivory White Almond Ivory White Almond 60 seconds lets you leave the room before lights go out LED’s glow softly in the dark for easy dimmer locating and show preset light level when switch is off Decorator frame easily gangs with any device Power failure memory - it remembers your settings even after a power interruption Superior suppression of interference with radio and TV Wallplate Included Individually boxed, 120VAC, 60 Hz Smart Remote Dimmers (use with Smart Dimmers) Case Qty 60 60 60 60 60 60 Each Cat No. 82830 82831 82833 82835 82836 82838 Watts 600 600 600 1000 1000 1000 Amps 5 5 5 8.33 8.33 8.33 Color Ivory White Almond Ivory White Almond Case Qty 60 60 60 60 60 60 Each Rotary Fan Speed Controls Cat No. Color Fans Controlled Amps Single Pole 120V 3 Speed 82610 Ivory 2 Fans 2.5 82611 White 2 Fans 2.5 82613 Almond 2 Fans 2.5 Single Pole 120V AC Receptacle Rotary On/Off Suppresses Radio Frequency Interference (RFI) Includes Wallplate, 82615 82616 Ivory White 82618 Almond Slide Fan & Light Speed Controls 82620 82621 124 Ivory White Description 3-way 3-way Case Each 50 50 10 10 3-5 Fans 5.0 10 Slide Fan Speed Controls Single Pole 120V Variable Speed 5 Amp for up to 5 Fans Suppresses Radio 2.5 Amp for 2 Fans 300W Dimmer Suppresses Radio Frequency Interference (RFI) Includes Wallplate Frequency Interference (RFI) Includes Wallplate Wallplate not included Cat No. Color 5.0 5.0 Variable Speed Control Interference Individually packed in hanging double blister card Individually Boxed Individually Boxed Cat No. 82660 82661 82663 10 10 10 3-5 Fans 3-5 Fans Single Pole 120V Quiet 4 speed Fits standard wall box 1.25 Amp for 1 fan Suppresses Radio Frequency Each Single Pole 120V Variable Speed Individually boxed Rotary Fan 3-Way Speed Controls Box Qty Color Ivory White Almond Box Qty 10 10 10 Each Cat No. 82650 82651 82653 Color Ivory White Almond Box Qty 10 10 10 Each WIRING DEVICES Occupancy Sensors Rating: Single Pole 120VAC, 60Hz 500W Resistive Tungsten: 500W @ 120V Fluorescent: 500VA @ 120V Motor: 1/8HP @ 120V Turns lights On/Off automatically when people enter or leave a room Will work with Electronic Ballasts PIR wall switch works best in offices, copy rooms, storage closets, small conference rooms, and other common areas where there are high levels of occupant motion. The Passive Infrared (PIR) senses occupancy by detecting the difference between heat emitted from the human body in motion and the background space. On/Off pushbutton Time delay Off setting is adjustable from 30 seconds to 30 minutes Ambient light setting automatically adjusts itself and controls when lights turn On/ Off, depending on sufficient natural light present “Walk through” sensing increases energy savings by shutting off lights shortly after momentary occupancy Self-adaptive feature automatically adjusts time delay based on present occupancy The sensors utilize a unique Fresnel lens which divides the coverage area into zones, enhancing detection of small movements Has “Zero Arc Point” technology, which increases the life of controlled devices and enhances their reliability Alert Function: sensors sound to let the occupant know the time delay will expire after 1 minute Conforms to California Title 24 Energy Code UL/cUL Listed Wall plate Included, individually boxed Cat No. Color Coverage Case Qty 80520 80521 Ivory White 150°, 450 Sq. Ft. 150°, 450 Sq. Ft. 60 60 Each 7-Day Heavy Duty In-Wall Timer Digital timer can replace standard wall switch to provide automatic control of outdoor or indoor lighting (incandescent and fluorescent light), fans, pumps, office machines, and other types of circuits. Automatic or manual operation Push the control cover to switch On/Off at any time Program up to 18 On/Off setting options per day Large, easy to read digital display, to-the-minute accuracy Built-in memory holds settings indefinitely without battery Batteries (replaceable) save the time and program settings when the unit is unplugged or there is a power outage Cat No. Color Case Qty 80510 Ivory 60 80511 White 60 Single pole Resistive Rating: 15A, 1800W Tungsten Rating: 15A, 1200W Motor Load: ½ HP Voltage: 120VAC, 60Hz Operating Temperatures: 32°F to +104°F UL/cUL Listed Wallplate Included Individually Boxed Multiple Daily Settings Options: All days of the week Individual days of the week 5 weekdays 2 weekend days Each 125 WIRING DEVICES Sound System Plates Gold Plate, Wall Connection Systems Strong Metal Backplate Single RCA Cat No. 80310 80311 Color Ivory White Box Qty 10 10 Each Color Box Qty 80340 80341 Ivory White 10 10 Each Cat No. 80320 80321 Color Ivory White Color Ivory White Box Qty 10 10 Each Cat No. 80350 80351 Color Ivory White Color Box Qty 80410 80411 Ivory White 10 10 Each Each Cat No. Color Box Qty 80330 80331 Ivory White 10 10 Box Qty 10 10 Each Cat No. 80390 80391 Color Ivory White Box Qty 10 10 Each Cat No. 80360 80361 Color Ivory White Box Qty 10 10 Color Ivory White Box Qty 10 10 Each Each Banana Jack 2 Pair Cat No. Color Box Qty 80370 80371 Ivory White 10 10 Each Triple Coax Double Coax Cat No. 80420 80421 Each Banana Jack 1 Pair Binding Post 2 Pair Single Coax Cat No. Box Qty 10 10 Triple RCA Single Coax Binding Post 1 Pair Cat No. 80380 80381 Triple RCA Double RCA Double RCA Single Coax Cat No. Decorative Style Cat No. 80430 80431 Color Ivory White Box Qty 10 10 Each 127 WIRING DEVICES UL & CSA Listed Telephone & Coax Plates Telephone Products Are Constructed With UL94V-0 Flame Retardant Plastic And 50 Micro Inches of Gold Plating. They Comply with UL Standard 1863 and Article 800-51 of The National Electrical Code. Cat No. Smooth Plate Smooth Plate Smooth Plate 4 Conductor RJ11 4 Conductor RJ11 4 Conductor RJ11 Meets FCC Requirements Meets FCC Requirements Meets FCC Requirements Bag Qty Color 80010 Ivory 80011 White 80012 Brown 80013 Lt Almond COMBINATION PHONE/CATV JACK DUPLEX PHONE JACK FLUSH PHONE JACK 10 10 10 10 Master Box Qty Each 100 100 100 100 Cat Bag No. Color Qty 80020 Ivory 10 80021 White 10 80023 Lt Almond 10 Master Box Qty Each 100 100 100 Cat No. Color 80056 Ivory 80057 White 80059 Lt Almond DECORATOR DUPLEX PHONE JACK DECORATOR PHONE JACK 4 Conductor RJ11 Plate & Jack are One Piece Meets FCC Requirements Bag Qty 10 10 10 Master Box Qty Each 100 100 100 DECORATOR COMBINATION PHONE/CATV JACK 4 Conductor RJ11 Plate & Jack are One Piece Meets FCC Requirements 4 Conductor RJ11 Plate & Jack are One Piece Meets FCC Requirements Cat No. Color Bag Qty Master Box Qty 80060 80061 Ivory White 10 10 100 100 Each Cat No. Color Bag Qty Master Box Qty 80070 80071 Ivory White 10 10 100 100 DECORATOR PHONE JACK Plate & Jack – 2 Pieces Meets FCC Requirements Each Color Ivory White Bag Qty 10 10 Cat No. 80170 Ivory 80171 White 80173 Lt Almond Each DECORATOR COMBINATION PHONE/CATV 4 Conductor RJ11 4 Conductor RJ11 Plate & Jack – 2 Pieces Meets FCC Requirements Plate & Jack – 2 Pieces Meets FCC Requirements Bag Master Qty Box Qty Each Color Master Box Qty 100 100 10 10 10 100 100 100 Cat No. 80180 80181 80183 Bag Master Color Qty Box Qty Each Ivory 10 100 White 10 100 Lt Almond 10 100 MIDSIZE MIDSIZE MIDSIZE FLUSH PHONE DUPLEX PHONE COAX JACK Smooth Plate Smooth Plate Smooth Plate 4 Conductor RJ11 4 Conductor RJ11 With F-81 Fitting Meets FCC Requirements Meets FCC Requirements Size Size 3-1/8”X4-7/8” 3-1/8”X4-7/8” Cat Bag Master No. Color Qty Box Qty Each 87010 Ivory 10 100 87011 White 10 100 87013 Lt Almond 10 100 128 Cat No. 80080 80081 DECORATOR DUPLEX PHONE JACK 4 Conductor RJ11 Cat Bag Master No. Color Qty Box Qty 80160 Ivory 10 100 80161 White 10 100 80163 Lt Almond 10 100 Each Cat No. Color 87020 Ivory 87021 White 87023 Lt Almond Bag Master Qty Box Qty Each 10 100 10 100 10 100 Size 3-1/8”X4-7/8” Cat No. 87510 87511 87513 Color Ivory White Lt Almond Bag Master Qty Box Qty Each 10 100 10 100 10 100 WIRING DEVICES UL & CSA Listed Telephone & Coax Plates Telephone Products Are Constructed With UL94V-0 Flame Retardant Plastic And 50 Micro Inches of Gold Plating. They Comply with UL Standard 1863 and Article 800-51 of The National Electrical Code. CABLE TV JACK DOUBLE CABLE TV JACK Smooth Plate With F-81 Fitting With F-81 Fittings DOUBLE COAX SINGLE PHONE JACK Smooth Plate 4 Conductor RJ11 Meets FCC Requirements Cat No. Color 85010 Ivory 85011 White 85012 Brown 85013 Lt Almond Bag Master Qty Box Qty 10 100 10 100 10 100 10 100 Each Cat No. 85020 85021 85023 Bag Master Qty Box Qty Each 10 100 10 100 10 100 Color Ivory White Lt Almond CAT NO. BAG MASTER COLOR QTY BOX QTY EACH 85030 Ivory 85031 White 85033 Lt Almond 10 10 10 DECORATOR DUPLEX CABLE TV JACK DECORATOR CABLE TV JACK Plate & Jack are One Piece 100 100 100 DECORATOR DOUBLE COAX SINGLE PHONE Plate & Jack are One Piece 4 Conductor RJ11 Plate & Jack – 2 Pieces Meets FCC Requirements Cat No. 85015 85016 Bag Color Qty Ivory White Master Box Qty 10 10 Each 100 100 Cat No. 85120 85121 Color Bag Qty Master Box Qty Ivory White 10 10 100 100 DECORATOR CABLE TV JACK Each Cat No. Color 85230 Ivory 85231 White 85233 Lt Almond Bag Qty 10 10 10 DECORATOR DUPLEX CABLE TV JACK Plate & Jack – 2 Pieces Color Bag Master Qty Box Qty Each 85115 Ivory 10 85116 White 10 85118 Lt Almond 10 100 100 100 Cat No. Bag Master Qty Box Qty Each Color 85220 Ivory 85221 White 85223 Lt Almond PLASTIC WALL PHONE PLATE 10 10 10 100 100 100 4 Conductor RJ11 Meets FCC Requirements Cat No. Color 80050 Ivory 80051 White 80052 Lt Almond FLUSH PHONE JACK Meets FCC Requirements Used in Kitchens Bag Qty 10 10 10 Master Box Qty Each 100 100 100 DOUBLE SURFACE MOUNT WALL JACK 6 CONDUCTOR 4 Conductor RJ11 Each SURFACE MOUNT WALL JACK Plate & Jack – 2 Pieces Cat No. Master Box Qty 100 100 100 Smooth Plate RJ14 4 Conductor RJ11 Meets FCC Requirements Meets FCC Requirements For 2 Separate Phone LInes Cat No. Color 80030 Ivory 80031 White 80033 Lt Almond Bag Qty 10 10 10 Master Box Qty Each 100 100 100 Cat No. Color 86010 86011 86013 Ivory White Lt Almond Bag Master Qty Box Qty Each 10 10 10 100 100 100 Cat No. Color 80053 Ivory 80054 White 80055 Lt Almond Bag Qty 10 10 10 Master Box Qty Each 100 100 100 129 WIRING DEVICES Cat 5E (RJ-45) Unshielded Keystone Jacks (Tooless) No Tooling Needed Use for Voice or Data 8 Position, 8 Contact 568A & 568B Wiring - Color Coded Contacts have 50u Gold Plating Connector has UL94V-0 Plastic Accepts 22-26 AWG Solid & Stranded Wire IDC Terminal Has Plastic Cap Which Pushes Wire Into the Connector and Therefore Needs No Tooling for Easy Installation Cat No. Color Bag Qty 88010 88011 Ivory White 10 10 Each Cat 3 (RJ-45) Unshielded Keystone Jacks (Tooless) No Tooling Needed Use for Voice 8 Position, 8 Contact 568A & 568B Wiring - Color Coded Contacts have 50u Gold Plating Connector has UL94V-0 Plastic Accepts 22-26 AWG Solid & Stranded Wire IDC Terminal Has Plastic Cap Which Pushes Wire Into the Connector and Therefore Needs No Tooling for Easy Installation Cat No. 88000 88001 Color Ivory White Bag Qty 10 10 Each Cat 5E 110 TYPE (RJ-45) Unshielded Keystone Jacks PUNCH DOWN TOOL NEEDED Use for Voice or Data 110 & Krone Type Termination 8 Position, 8 Contact 568A & 568B Wiring - Color Coded Contacts have 50u Gold Plating Connector has UL94V-0 Plastic Accepts 22-26 AWG Solid & Stranded Wire Amp Compatible Cat No. 88020 88021 88022 88023 Color Ivory White Blue Red Bag Qty 10 10 10 10 88024 88025 88026 88027 88028 Yellow Black Green Orange Lt. Almond 10 10 10 10 10 Each Cat 5E Vertical 12 Port Patch Panels This Compact High Density 12 Port Cat 5E Patch Panel is perfect for the Small Network Installation H10” X W2.25” X D1.75” Top Entry Type, 568B Wiring, 110 Type Accepts Krone & 110 Impact Tool 89D Bracket Included for Mounting Cat No. 88042 Ports 12 Port Vertical Each Cat 5E High Density Patch Panels Top Entry Type 568B Wiring 110 Type Accepts Krone & 110 Impact Tool 130 Cat No. Ports Dimensions 88044 24 Port Patch Panel H1.75” X W19” X D1.32” 88046 48 Port Patch Panel H3.50” X W19” X D1.32” Each WIRING DEVICES RCA Modular Inserts Cat No. 88230 88232 Color Ivory White Bag Qty 10 10 Each Cat No. 88212 88214 Color Bag Qty 88216 88218 88219 Ivory White Lt. Almond 10 10 10 Color Ivory White Bag Qty 10 10 Each Cat No. 88220 88222 Each Cat No. Color Bag Qty 88224 88226 88227 Ivory White Lt. Almond 10 10 10 Hinged Wall-Mount Brackets Color Ivory White Bag Qty 10 10 Each Cat 5E UTP Coupler Blank Modular Inserts “F” CATV Modular Inserts Cat No. “ST” Fiber Optic Modular Inserts BNC Modular Inserts Female To Female RJ-45 Each Cat No. Color Bag Qty 88240 Black 10 Each Single Gang Double Gang Surface Mount Box Surface Mount Box Housing Only – Accepts Keystone Jacks Housing Only – Accepts Keystone Jacks Hold panels 6” from wall Provides a rear cable entry Opening for easy cable access Threaded holes follow standard EIA pattern Cat No. 88052 88054 Height 1-3/4” 3-1/2” Panel 24 Port 48 Port Each 1 Piece Patchcord Strain Reliefs Protects the connector Used as color-codes for different departments, work stations or cable functions Attached before RJ45 plugs are terminated Can’t be removed after termination Cat No. Color Bag Qty 88512 88514 88516 88518 88520 88522 88524 Black Green Yellow Ivory Gray Blue Red 10 10 10 10 10 10 10 Cat No. Color Bag Qty 88252 88254 Ivory White 10 10 Each Cat No. 88256 88258 Color Ivory White Bag Qty 10 10 Each Cat 5E UTP Patchcords Blue Cord 100% Tested To meet T568B CAT 5E standards 2-RJ45 Gold Plated 50u 8P8C Plugs Stranded 24AWG 4 Pair Wire Provides Maximum Flexibility Each Cat No. Length 88312 88314 88318 88320 88322 3’ 5’ 10’ 14’ 20’ Each 131 WIRING DEVICES Wallplate For Keystone Jacks & Modular Inserts Decorator Wallplate For Keystone Jacks & Modular Inserts Note that Decorative 4 and 6 gang plates can only be used with modular inserts 88010/88011 Jacks (pg 130) & Modular Inserts (pg 131) Cat No. 88102 88104 88106 88108 Color Ports Bag Qty Ivory Ivory Ivory Ivory 1 2 3 4 10 10 10 10 88110 Ivory 6 10 88112 White 1 10 88114 White 2 10 88116 White 3 10 88118 White 4 10 88120 White 6 10 88122 Lt. Almond 1 10 88124 Lt. Almond 2 10 88126 Lt. Almond 3 10 88128 88130 Lt. Almond Lt. Almond 4 6 10 10 Each Cat No. Color Ports Gang Bag Qty 88142 88144 88146 Ivory Ivory Ivory 1 2 3 1 1 1 10 10 10 88148 88150 88152 88162 88164 88166 88168 88170 88172 88182 88184 88186 88188 88190 Ivory Ivory Ivory White White White White White White Lt. Almond Lt. Almond Lt. Almond Lt. Almond Lt. Almond 4 6 12 1 2 3 4 6 12 1 2 3 4 6 1 1 2 1 1 1 1 1 2 1 1 1 1 1 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Stainless Steel Phone Jack Cord Ends Junction Box Each With Mounting Block 4 Conductor – Ivory 4 Conductor RJ11 Used in Kitchens Note that 40120 RJ11 Cord End will fit into a RJ45 Wall Jack For 2 Phone LInes Cat No. Box Qty 40070 50 132 Each Cat No. Type Usage Bag Each 40120 RJ11 Wall Jacks 10 40122 RJ22 Hand Cord Sets 10 88612 RJ45 Cat5e Wall Jacks 10 No. 40040 Box Qty 50 Each Cord Coupler Duplex Adaptor Connects Two Modular Cords 4 Conductor – Ivory Convert One Line to 2 Lines 4 Conductor – Ivory Cat No. 40100 Box Qty 50 Each Cat No. 40090 Box Qty 50 Each WIRING DEVICES Splitters & ’F’ Connectors Mini 2 Way Splitters 2 Way Splitters 3 Way Splitters With Grounding Block With Grounding Block Allows 2 units to be operated from one source Allows 2 units to be operated from one source Allows 3 units to be operated from one source Accepts coaxial ‘F’ fittings Accepts coaxial ‘F’ fittings Accepts coaxial ‘F’ fittings Cat No. Cat Bag Master No. MHz Type Qty Box Each 45025 900 Standard 10 100 MHz Type Bag Master Qty Box Each 45030 900 Standard 10 45032 1000 Digital 10 45034 2050 Satellite 10 50 50 50 4 Way Splitters 8 Way Splitters With Grounding Block With Grounding Block Cat No. MHz Bag Master Qty Box Each Type 45040 900 Standard 45042 1000 Digital 45044 2050 Satellite 10 10 10 30 30 30 Compression Connectors Push-Lock Design F BNC RCA Used by Cable TV & Satellite Companies Design prevents moisture from entering the Allows 4 units to be operated from one source Allows 8 units to be operated from one source Accepts coaxial ‘F’ fittings Accepts coaxial ‘F’ fittings Cat No. MHz Bag Master Qty Box Each Type Cat No. MHz Type Bag Master Qty Box Each 45050 900 Standard 45052 1000 Digital 10 10 30 30 45055 900 Standard 1 10 45057 1000 1 10 45054 2050 10 30 45059 2050 Satellite 1 10 Satellite Split Feed Connectors Digital Terminators Attach to unused terminals of splitters, couplers, amplifiers & outlets Built-in resister reduces ghosting & feedback Cat No. 45028 MHz Type 1000 Digital Bag Qty Each 10 Cat No. Bag Qty MasterBag Qty Each 45095 FEMALE TO FEMALE CONNECTOR 10 100 “F” CONNECTOR TWIST ON rear of the connector & an ‘O’ ring keeps moisture from entering through the nut Water-tight seal for outdoor applications & superior durability in all climates Compression crimp protects the center conductor from damage Permanent connections do not pull off or become loose Gold Plated contacts RF signal containment ensures strong signal Cat No. Type Bag Master Qty Bag Qty Band F Male Compression 45072 RG6 45074 RG6U Quad Shield 10 10 100 100 Yellow Blue 45076 10 100 Red RG59 BNC Male Compression w/Extra Pin 45102 RG6 Quad Shield 45106 RG59 Quad Shield 10 10 100 100 RCA Male Compression Connector w/Extra Pin & 6 Color Bands 45112 RG6 Quad Shield 45116 RG59U Quad Shield 10 10 100 100 “F” CONNECTOR CRIMP ON Terminates coaxial WITH NUT & WASHER cable Crimp on to prepared cable end Couples 2 coaxial cables together that terminate in ‘F’ plugs Cat No. Bag Qty Master Bag Qty 45100 10 100 Each Terminates coaxial cable Twist on to prepared cable end Cat No. 45080 45090 Type RG6 RG59 Bag Qty 10 10 Master Bag Qty Each 100 100 Cat No. 45060 45062 Bag Master Type Qty Bag Qty RG6 10 100 RG6/U 10 100 Quad Shield 45070 RG59 10 100 133 WIRING DEVICES Switches are Individually Labeled & Bagged in Sealed Hanging Plastic Bags Cat No. 70010 70011 PULL CHAIN PULL CHAIN PULL CHAIN Brass With String SPST, On-Off 6” Leads Nickel With String SPST, On-Off 6” Leads Brass 3 Way/2 Circuit 6” Leads 6 AMP, 125VAC 3 AMP, 250VAC 6 AMP, 125VAC 3 AMP, 250VAC 6 AMP, 125VAC 3 AMP, 250VAC Bag Qty 10 100 Bulk Each Cat No. 70020 70021 PULL CHAIN Brass 3 SPEED OFF-ON-ON-ON STAB CONNECTIONS 6 AMP, 125VAC 3 AMP, 250VAC Cat No. 70040 Cat No. 70160 Cat No. 70200 Bag Qty 10 Bag Qty 10 Each Cat No. 70140 Cat No. 70025 SPST NORMALLY OFF SPST NORMALLY ON 6 AMP, 120VAC 3 AMP, 240VAC 6 AMP, 120VAC 3 AMP, 240VAC Bag Qty 10 Each OPENING 7/16” X 1” 8 AMP, 125VAC 4 AMP, 250VAC 1/3HP, 125VAC 16 AMP, 125VAC, 1/3HP 10 AMP, 250VAC, 1/2HP Cat No. Bag Qty Poles Circuitry Each 70180 10 SPST On-Off 70181 10 SPDT On-Off-On PUSH CANOPY Brass Nickel SPST, ON-OFF 6” LEADS SPST, ON-OFF 6” LEADS 6 AMP, 125VL 3 AMP, 250VAC 6 AMP, 125VL 3 AMP, 250VAC Each Bag Qty 10 Cat No. 70210 Bag Qty 10 Each ROTARY CANOPY RUBBER COVER AND NUT Brass For Toggle Switch Each Cat No. 70150 Bag Qty 10 Each LIGHTED ROCKER SWITCH SPST, ON-OFF OPENING 7/16” X 1” 16 AMP, 125VAC, 1/3HP 10 AMP, 250VAC, 1/2HP PUSH CANOPY Bag Qty 10 Each MOMENTARY CONTACT SPST, ON-OFF Each Bag Qty 10 MOMENTARY CONTACT ROCKER SWITCH 1 AMP, 125VT 3 AMP, 250VAC 134 Each PUSH BUTTON Cat No. 70190 Bag Qty 10 Brass SPST, ON-OFF 6” LEADS 1 AMP, 125VT 3 AMP, 250VAC Cat No. 70220 Bag Qty 10 Cat No. 70240 70241 Bag Qty 10 100 Bulk Each Each ROTARY SWITCH Black Plastic SPST, ON-OFF #18AWG 6” LEADS moisture, dirt, salt & spray Built-in nut base Fits Standard Toggles Each ROTARY CANOPY Protects switches from SPST OFF-ON-ON-ON 6” LEADS Cat No. 70230 Bag Qty 10 100 Bulk .60 Dia. .73 Ht. 3 AMP, 125VAC 1.5 AMP, 250VAC Rotary switches are perfect for household appliances, ceiling fixtures and lamps Cat No. 70422 Bag Qty 10 Each WIRING DEVICES Switches are Individually Labeled & Bagged in Sealed Plastic Bags Cat No. 70050 Bag Qty 10 TOGGLE SWITCH TOGGLE SWITCH Medium Duty Medium Duty SPST, ON-OFF 6” LEADS SPST, ON-OFF 2 SCREW TERMINALS 8 AMP, 125VAC 4 AMP, 250VAC 1/3HP, 125VAC 15 AMP, 120VAC 10 AMP, 240VAC Each Cat No. 70060 Bag Qty 10 Cat No. 70070 Bag Qty 10 Each Heavy Duty Heavy Duty SPDT, ON-OFF-ON 3 SCREW TERMINALS SPDT, ON-ON 3 SCREW TERMINALS DPST, ON-OFF 4 SCREW TERMINALS 20 AMP, 125VAC 10 AMP, 277VAC 3/4HP, 125/250VAC 20 AMP, 125VAC 10 AMP, 277VAC 3/4HP, 125/250VAC 20 AMP, 125VAC 10 AMP, 277VAC 1-1/2HP 125/250VAC Bag Qty 10 Each Cat No. 70090 DPDT, ON-OFF-ON 6 SCREW TERMINALS Bag Qty 10 Each Bag Qty 10 Each Cat No. 70100 Bag Qty 10 TOGGLE SWITCH Heavy Duty DPDT, ON-ON 6 SCREW TERMINALS Heavy Duty 20 AMP, 125VAC 10 AMP, 277VAC 1-1/2HP 125/250VAC 20 AMP, 125VAC 10 AMP, 277VAC Cat No. 70120 Bag Qty 10 Each Cat No. 70130 TOGGLE SWITCH TOGGLE SWITCH Each NONMETALLIC TOGGLE SWITCH SPST, ON-OFF 2 SCREW TERMINALS 20 AMP, 125VAC 10 AMP, 277VAC 1-1/2HP 125/250VAC Bag Qty 10 Each TOGGLE SWITCH MOMENTARY = ( ) Heavy Duty MOMENTARY = ( ) Heavy Duty MOMENTARY = ( ) Heavy Duty SPST, OFF-(ON) 2 SCREW TERMINALS SPDT, ON-OFF-(ON) 3 SCREW TERMINALS SPDT, (ON)-OFF-(ON) 3 SCREW TERMINALS 20 AMP, 125VAC 10 AMP, 277VAC 3/4HP 125/250VAC 20 AMP, 125VAC 10 AMP, 277VAC 3/4HP 125/250VAC 20 AMP, 125VAC 10 AMP, 277VAC 3/4HP 125/250VAC Bag Qty 10 Each Cat No. 70270 TOGGLE SWITCH Cat No. 70260 20 AMP, 125VAC 10 AMP, 277VAC 3/4HP, 125/250VAC Heavy Duty Heavy Duty Cat No. 70250 SPST, ON-OFF 2 SCREW TERMINALS TOGGLE SWITCH TOGGLE SWITCH Cat No. 70110 Heavy Duty TOGGLE SWITCH TOGGLE SWITCH Cat No. 70080 Each TOGGLE SWITCH Bag Qty 10 Each Cat No. 70280 TOGGLE SWITCH Bag Qty 10 Each TOGGLE SWITCH MOMENTARY = ( ) Heavy Duty MOMENTARY = ( ) Heavy Duty MOMENTARY = ( ) Heavy Duty DPST, ON-(OFF) 4 SCREW TERMINALS DPDT, ON-OFF-(ON) 6 SCREW TERMINALS DPDT, (ON)-OFF-(ON) 6 SCREW TERMINALS 20 AMP, 125VAC 10 AMP, 277VAC 1-1/2HP 125/250VAC 20 AMP, 125VAC 10 AMP, 277VAC 1-1/2HP 125/250VAC 20 AMP, 125VAC 10 AMP, 277VAC 1-1/2HP 125/250VAC Bag Qty 10 Each Cat No. 70290 Bag Qty 10 Each Cat No. 70300 Bag Qty 10 Each 135 WIRING DEVICES Heavy-Duty Toggle Switches - 3 Pole & 4 Pole Great for power tool and motor control switch applications Rugged long-wearing solid brass/nickel-plated bushings ½ in. Diameter mounting hole Screw Terminals Individually bagged, 10 per Master Bag Cat. No. 70301 70302 Poles 3PST 3PDT Number of Terminals 6 9 Amps 125 VAC 15 15 Amps 277VAC 10 10 HP 125-250 VAC ¾ ¾ Dimensions L” x W” x H” 1.31x1.09x.80 1.31x1.09x.80 Bag Qty 10 10 70303 70304 3PDT On-Off-On 9 15 10 ¾ 1.31x1.09x.80 10 4PST On-Off 8 15 10 ¾ 1.31x1.44x.80 10 70305 4PDT On-On 12 15 10 ¾ 1.31x1.44x.80 10 70306 4PDT On-Off-On 12 15 10 ¾ 1.31x1.44x.80 10 Circuitry On-Off On-On Pull Chain Lampholder Keyless Lampholder Medium Base, Incandescent, Aluminum Brass Dipped 250W, 250V Medium Base, Incandescent Aluminum Brass Dipped 660W, 250V Cat No. 45200 45203 Type On-off 3-Way 136 Bag Qty 10 10 Each Cat No. 45205 Bag Qty 10 Each Push Thru Lampholder Turn Knob Lampholder Medium Base, Incandescent, On/Off Aluminum Brass Dipped 660W, 250V Medium Base, Incandescent Aluminum Brass Dipped 250W, 250V Cat No. 45210 Cat No. 45232 45233 Each Bag Qty 10 Cat No. 45215 45220 Each Type On-off 3-Way Bag Qty 10 10 Each T-8 Low Profile Lampholder T-8 Tall Profile Lampholder Medium Bi-Pin Fluorescent Slide-On with Captive Nut Push Wire Terminations 660W, 600V Medium Bi-Pin Fluorescent Slide-On with Captive Nut Push Wire Terminations 660W, 600V Cat No. 45225 Cat No. 45226 Type Plunger Fixed Bag Qty 10 Each Bag Qty 10 Each Single Pin Lampholder High Output Lampholder Fluorescent Pedestal Type Single Pin Lamp Fa8, Slide-On Base Push Wire Terminations 660W, 1000V Pedestal Type for High Output Lamp R17d Slide-On Base Push Wire Terminations 660W, 1000V Bag Qty 10 10 Each Cat No. 45234 45235 Type Plunger Fixed Bag Qty 10 10 Each WIRING DEVICES Rectangular Indicator Pilot Lamp Round Indicator Pilot Lamp Incandescent 1.2 1.3 .41 .08 1.14 .53 1.25 .11 Ø.57 1.2 .39 .25 Measurement = Inches .25 .85 Measurement = Inches 250VAC Incandescent Cat No. 70310 70311 70312 Color Bag Qty Green Red Amber Each 10 10 10 Major Appliance Air Conditioner Cords 15A 120 Volt Parallel Blades 14/3 SPT-3 Cord w/ground Beige Color Each Cat No. Color Ratings 70320 70321 70322 Green Red Amber 250VAC 250VAC 250VAC Spade Spade Spade 10 10 10 70323 Green 125VAC 6” Wire Leads 10 70324 Red 125VAC 6” Wire Leads 10 70325 Amber 125VAC 6” Wire Leads 10 70326 Green 24VDC 6” Wire Leads 10 70327 Red 24VDC 6” Wire Leads 10 70328 Amber 24VDC 6” Wire Leads 10 3 Outlet Heavy Duty T-Tap Extension Cord 3 Outlet Power Adapter 2 Foot Length, Orange Color 15 Amp-125 Volt, 12/3 STW Cord Approved Under OSHA Standards For Outdoor and Indoor Use 15A/125V Converts Single Grounded Outlet to Provide Three Grounded Outlets Unbreakable Hard Rubber Material Cat No. Length Box Qty 89212 89214 3’ 6’ 24 24 89216 9’ 12 89218 12’ 12 Cat No. Length Box Qty 89220 15’ 12 89312 2’ 12 Lightning Arrester / Surge Suppressor #89112 Termination Style Bag Qty Each #89114 Protects residential and small commercial panelboards, industrial pumps, motors, air conditioning disconnects, utility meter cans, transformers, weather heads, light poles, plus many more applications Weatherproof - can be used outdoors Each Cat No. 89412 Case Qty 144 Each Model 89114 has indicator light that shows surge protection is present, ground present and power on Installs at electrical panel, electrical disconnect cULus Listed, ANSI/IEEE C62.11 Hardwire parallel connection Unlimited (Parallel Installation) continuous current Response Time: <5 nSec Installed, <1 nSec component level MCOV: 130 VAC (L - G), 260 VAC (L - L) Operating Frequency: 0 - 400 Hz AC protection Modes: L - L & L - G Service Voltage: 120/240 VAC Single Phase Black high impact plastic housing Housing size: 3” x 2.25” x .75” Cat No. Indicator Light Surge Current Max Energy Dissipation Case Qty 89112 No 50,000 A. 420 Joules 48 89114 Yes 100,000 A. 840 Joules 48 Each 137 WIRING DEVICES Straight Blade Plugs and Connectors Angle Plug Straight Plug Rugged construction resists impact, sunlight, chemicals and rough use All contacts are solid one-piece brass for better conductivity Heavy-duty power contacts set in deep pockets to resist damage Cat No. Amps Volts NEMA# Straight Plug Box Qty 89612 89614 15 20 125 125 5-15P 5-20P 10 10 89616 89618 15 20 250 250 6-15P 6-20P 10 10 89632 89634 89636 89638 15 20 15 20 125 125 250 250 5-15P 5-20P 6-15P 6-20P 10 10 10 10 Each Angle Plug Locking Receptacles Twist Lock Connectors These styles commonly used for Most Generators 3 Pole 4 Wire 125/250 VAC Industrial Grade Cat No. 89752 89754 Amps Volts NEMA# 3 Pole 4 Wire 20 Amp 125-250VAC Male Cap 20 125/250 L14-20P Female 20 125/250 L14-20R 89756 89758 3 Pole 4 Wire 30 Amp 125-250VAC Male Cap 30 125/250 L14-30P Female 30 125/250 L14-30R Cat No. Amps NEMA # Box Qty Each 89742 89744 20 30 L14-20R L14-30R 10 10 Type Box Qty Each 10 10 10 10 Generator Power Cord Sets Feed-Thru Cord Switches These cord sets are designed for use with manual transfer switches, transfer panels, and power inlet boxes. UL listed. 300V SJTOW Rubber Cord -30oF (-34oC) Outdoor Use & Oil Resistant 3 Amp 250 VAC, 6 Amp 125 VAC Miniature Single Pole On-Off Sequence Captive Screw For use with #18 SPT-1 Wire 138 Cat No. Color Bag Qty 70450 70451 Brown White 10 10 70452 Black 10 Cat No. 89342 89344 Amps 20 20 Size 12/4 12/4 Length 10 Ft 20 Ft NEMA# L14-20 L14-20 89346 89348 89350 89352 20 30 30 30 12/4 10/4 10/4 10/4 40 Ft 10 Ft 20 Ft 40 Ft L14-20 L14-30 L14-30 L14-30 Max Gen Input Box Qty 5 KW 16 5 KW 10 5 KW 7.5 KW 7.5 KW 7.5 KW 5 10 6 3 Each WIRING DEVICES Home Network Wiring System Provides a fast and easy access point for all voice, audio, video and data connections Media Center modules snap into place (no tool required), precise hole spacing allows flexibility for mounting Fully integrates, manages and distributes broadband and multimedia services Choose between Surface and Recessed units Uses multiple knock-outs and pre-punched holes for fast and easy installations Includes raised mounting rails to create a clean wiring channel behind mounted modules Features 180o captured hinge cover design for easy access and positive closing latch Modules can be mounted in Enclosure or mounted as individual units directly on any surface - simply remove existing push pins and insert screw to fasten on desired surface Home Network Enclosures with Hinged Door Fully supported broadband and multimedia integration Our innovative series of modules and 87100 Hold up to 4 Modules Pg 141 or 3 Modules Pg 139-140 Cat No. 87100 87102 87106 87102 87106 Holds up to 16 Modules Pg 141 or 8 Modules Pg 139-140 Mounting Surface Surface Flush Holds up to 16 Modules Pg 141 or 8 Modules Pg 139-140 Size 6.7” W x 10.2”H x 3.4”D 14.5” W x 18.9”H x 4.3”D 14.4” W x 21.3”H x 3.7”D Each enclosures manage and distribute voice, video, data, and audio on a fully flexible and customizable platform All enclosures have a keyed latch installed for positive closure and added security Captured hinge cover design allows easy access while eliminating lost parts 18 Gauge steel construction provides strength and excellent EMI/RFI protection Multiple knock outs and pre punched holes accommodate tie wraps, mounting screws, ground screws, and wire bundles. Raised mounting rails provide clean wiring channel behind mounted modules Television Master Hub Telephone Master Hub Cat5e Data Master Hub Television distribution to 6 rooms Accepts 2 inputs allowing insertion of video Extends 4 lines (phone, fax, or modem) to 6 Allows serviceable termination of data wires rooms Expandable Cat5 telephone hub Color coded 110 IDC blocks for simple and camera feed Built-In Amplifier, 0db insertion loss Return loss 10dB—isolation 20dB 9VDC 300mA power supply included 6-1/2” (W) x 2-7/8” (H) x 1” (D) Cat No. 87158 Each Telephone & TV Master Hub from 8 locations Integral RJ-31X security interface and RJ-45 expansion jack 6-1/2” (W) x 2-7/8” (H) x 1” (D) Cat No. secure terminations Gold plated RJ-45 terminals provide clean and solid connections Conforms to EIA/TIA 568B standards 6-1/2” (W) x 2-7/8” (H) x 1” (D) Each Cat No. 87156 87154 Each Extends 4 lines (phone, fax, or modem) to 6 rooms & Cable to 6 locations Expandable Cat5 telephone hub Integral RJ-31X Security interface & RJ45 expansion jack Accepts 2 inputs allowing insertion of video camera feed Power supply eliminates insertion loss Return loss 10dB - isolation 20dB 9 9VDC 300mA power supply included 6-1/2” (W) x 4-7/8” (H) x 1” (D) Cat No. 87152 Each 139 WIRING DEVICES Home Network Wiring System Telephone Expansion Hub Adds 8 more telephone extensions to an existing telephone hub Use a RJ45 patch cord to jump 6-1/2”(W) x 2-7/8”(H) X 1”(D) Audio Master Hub 120VAC Power Module Distribution of 2 audio channels to 6 rooms Solid brass binding posts provide secure connections for 14AWG wire Binding post holes are angled for convenient and neat wire installation 10mA max - 1.1kVAC max 6-1/2” (W) x 2-7/8” (H) x 1” (D) Cat No. Each Cat No. 87160 87168 Video Amplifier Each Conveniently provides power within the master enclosure Rear 1/2” knockout hole supplied with plastic NM-B cable connector for fast secure installation UL listed NEMA 5-15R receptacle 6-1/2” (W) x 2-5/8”(H) x 1”(D) Cat No. 87162 Ethernet 10/100 Base T Switch Each Audio/Video Modulator Must install a separate channel filter on CATV line to remove desired channel from incoming service Rear View Full band amplifier for boosting signal for Conveniently networks PC’s to create an Digitally tuned modulator that converts any 1-4 locations Input signal UHF, VHF, FM & DAB integrated home network Gold plated RJ-45 terminals provide clean and solid connections RJ-45 ports - slide switch uplink auto negotiation all ports 12VDC 500mA power supply included bassband video & audio signal to a user selected UHF or CATV channel View security camera broadcasts at any TV for added home security Output channels 14-128 set by dip switch Frequency 47MHz - 860MHz 6-1/2”(W) x 2-7/8”(H) X 1”(D) 6-1/2” (W) x 1” (D) Cat No. Each 87174 Satellite 4-Way Switch Provide Satellite TV to 4 locations 250 MHz 6-1/2”(W) x 4-3/8”(H) Cat No. 140 87172 Each Cat No. 87164 87170 Ports 5 8 Height 3-1/4” 4-1/4” Each 12VDC 500mA power supply included 6-1/2”(W) x 3”(H) x 2-3/8”(D) Cat No. 87166 Each 6 Way CATV Splitter Module 8 Way CATV Splitter Module Takes 1 Coax cable and distributes it up to Takes 1 Coax cable and distributes it up to 6 other locations 1 GHz 8 other locations 1 GHz 6-1/2”(W) x 2-7/8”(H) 6-1/2”(W) x 2-7/8”(H) Cat No. 87176 Each Cat No. 87178 Each WIRING DEVICES Home Network Wiring System 1x9 Bridged Voice Module 8-Port Cat5e Voice/Data Module Basic telephone distribution Bridge up to 4 telephone lines to 9 locations Connect up to 9 separate phones per line Circuit board module, 4-pair 110-type IDC punchdowns The first 110 connection is terminated to the demarcation point from the service provider Cat No. Each 87112 1x8 Voice & Expansion Module Module Dimensions 6.5” x 1.75” Voice & Security Module Basic Home Networking Expansion Module Includes Security Interface Patch phone or data connections to 8 locations Bridge up to 4 telephone lines to 8 locations Combine with a TLDM, key system, or network Connect up to 8 separate telephones per line hubs for additional applications Connect to security system Printed circuit board module Printed circuit board module 4-pair 110-type IDC punchdowns and 8 CAT 4-pair 110 type IDC punchdowns 5e RJ-45 ports Cat No. 87114 Each Voice/Data/Security & Exp. Module Cat No. 87116 Each 1x6 Audio Connection Module Includes Security Interface Bridge up to 4 telephone lines to 8 locations Connect up to 8 separate telephones per line Printed circuit board module 4-pair 100 type IDC punchdown Cat No. 87118 Each Voice/Data & Expension Module Bridge up to 4 telephone lines to 11 locations Printed circuit board module One incoming 4-pair 110-type IDC punchdown and 11 outgoing RJ-45 jack connections Combine with a Category 5e board to route telephone to remote locations Cat No. 87120 Each Supports up to six pairs of speakers Combine with volume controls to control up to six pairs of speakers from one amplifier or receiver Parallel connection scheme insures sound quality User-removable connectors facilitate installation Connects with standard fire-related speaker wire Cat No. 87122 Each Video Amplifier UHF/VHF/FM Basic telephone distribution Run cable TV or other video signals Bridge up to 4 telephone lines to 11 locations Printed circuit board module One incoming 4-pair 110-type IDC punchdown and 11 outgoing RJ-45 jack connections Combine with a Category 5e board to route through the video amplifier before splitting & distributing throughout the home or office 30db, 60hz Bi-Directional telephone to remote locations Cat No. 87124 Each Cat No. 87128 Each 141 WIRING DEVICES 6 Outlet Power Strip Surge Protector 6 Outlet Power Strip Display Box Packaging Display Box Packaging Display Box Packaging No Protection Good Protection Integrated Circuit Breaker Switch (2 in 1) AC 125V/15A ABS Plastic Housing Mounting Bracket UL 1363 750 Joules Surge Dissipation 500V Clamping Voltage Integrated Circuit Breaker Switch (2 in 1) Full 3 Line Surge Protection EMI/RFI Noise Filter LED Indicator AC 125V/15A ABS Plastic Housing Mounting Bracket UL 1363 & 1449 Cat No. 89022 Cord Length 6’ Box Qty 36 6 Outlet Metal Strip Surge Protector Each Cat No. 89030 89032 89034 Cord Length Box Qty 4’ 36 6’ 36 12’ Good Protection Each 750 Joules Surge Dissipation 400V (L-N) Clamping Voltage 500V (L-G,N-G) Clamping Voltage 6000V Max Surge Volts 13,500 Amps Max Current Spike AC 125V/15A Integrated Circuit Breaker Switch Cat No. 89060 Cord Length 6’ Box Qty 20 Each 36 6 Outlet Surge Protector 6 Outlet Surge Protector 9 Outlet Surge Protector Antenna/CATV Protection Phone/Fax/Modem Protection Phone/Fax/Modem/CATV Protection Display Box Packaging Best Protection 142 Cord Length Box Qty 4’ 24 Display Box Packaging Best Protection 1050 Joules Surge Dissipation 400V (L-N, N-G) Clamping Voltage 500V (L-G) Clamping Voltage 6000V Max Surge Volts 19,500 Amps Max Current Spike AC 125V/15A CATV Protection Full 3 Line Surge Protection EMI/RFI Noise Filter LED Surge Indicator ABS Plastic Housing Cat No. 89080 Display Box Packaging Each Ultimate Protection 1050 Joules Surge Dissipation 400V (L-N, N-G) Clamping Voltage 500V (L-G) Clamping Voltage 6000V Max Surge Volts 19,500 Amps Max Current Spike AC 125V/15A Phone/Fax/Modem Protection Full 3 Line Surge Protection EMI/RFI Noise Filter LED Surge Indicator ABS Plastic Housing Cat No. Cord Length Box Qty 89070 6’ 24 Each 2100 Joules Surge Dissipation 400V Clamping Voltage 6000V Max Surge Volts 39,000 Amps Max Current Spike AC 125V/15A Phone/Fax/Modem/CATV Protection Full 3 line surge protection EMI/RFI noise filter LED surge indicator ABS Plastic Housing Cat No. Cord Length Box Qty 89090 6’ 20 Each WIRING DEVICES 6 Outlet Surge Wall Tap 6 Outlet Surge Wall Tap 6 Outlet Surge Wall Tap Phone/Fax/Modem Protection Antenna/CATV Protection Hanging Card Packaging 1050 Joules Surge Dissipation 400V (L-N) Clamping Voltage 500V (L-G,N-G) Clamping Voltage 6000V Max Surge Volts 19,500 Amps Max Current Spike AC 120V/15A Full 3 Line Surge Protection EMI/RFI Noise Filter LED Surge Indicator ABS Plastic Housing Cat No. 89010 Box Qty 24 Each 3 Outlet Wall Outlet Surge Protector 420 Joules Surge Dissipation 330V Clamping Voltage 6500V Max Surge Volts 19,500 Amps Max Current Spike AC 125V/15A Phone/Fax/Modem Protection Full 3 Line Surge Protection EMI/RFI Noise Filter LED Surge Indicator ABS Plastic Housing Hanging Card Packaging Cat No. 89012 Box Qty 40 Each 420 Joules Surge Dissipation 330V Clamping Voltage 6500V Max Surge Volts 19,500 Amps Max Current Spike AC 125V/15A CATV Protection Full 3 Line Surge Protection EMI/RFI Noise Filter LED Surge Indicator ABS Plastic Housing Hanging Card Packaging Cat No. 89014 Box Qty 40 Each 25-Pair 66 IDC Wiring Blocks Single Surge Outlet Phone/Fax/Modem Protection Wiring Block Good Protection Mounting Bracket Good Protection Hanging Card Packaging Hanging Card Packaging Cover 750 Joules Surge Dissipation 500V Clamping Voltage Full 3 Line Surge Protection EMI/RFI Noise Filter LED Surge & Wiring Indicator AC 125V/15A, Resets Automatically UL 498A and 1449 Cat No. 89040 Box Qty 48 Each 750 Joules Surge Dissipation 500V Clamping Voltage Full 3 Line Surge Protection EMI/RFI Noise Filter LED Indicator Phone/Fax/Modem Protection AC 125V/15A UL 498A and 1449 Cat No. 89050 Box Qty 60 Each Hooked contacts for smooth wire placement Nickel plating gives secure connection Clear plastic cover fits over entire block, protects contacts & allows a clear view of all connections without removing cover High-Impact PVC construction Cat No. 40130 40132 Description Wiring Block Mounting Bracket 40133 Cover Each 143 WIRING DEVICES Builders Chime Kit Builders Chime Kit With 5/8” Diameter Pushbutton Contents: (1) Chime (white) (2) Push buttons (white) (1) 16V 10W transformer White cover designed to go with any décor High quality sound bars provide pleasing tone Non-stick buttons & non-stick plungers provide years of trouble free performance 28 volt low density bulbs in lit pushbuttons for long life Chime Dimensions 7” x 4” x 2” Easy installation Kits/Case Each Kit Contents: (1) Chime (White) (1) Lit gold rim pearl push button (1) 16Volt 10 Watt transformer White cover designed to go with any décor High quality sound bars provide pleasing tone Non-stick buttons & non-stick plungers provide years of trouble free performance 28 volt low density bulbs in lit pushbuttons for long life Chime Dimensions 7” x 4” x 2” Easy installation Cat No. Description 78010 Kit with 2 Unlit Pushbuttons 24 78020 Kit with 2 Lit Pushbuttons 24 Cat No. Description Kits/Case 24 78030 Kit with 1 Lit 5/8” Dia. Pushbutton 24 78000 Chime Only (no buttons or transformer) Wireless Plug-In Door Chime Kit Wireless Battery Powered Door Chime Kit 120 VAC plug fits into any 3 different chime tunes (8 note Westminster, 2 note ding dong & 1 note ding) Weatherproof pushbutton 12V A23 battery included 100 ft. operating range Receiver takes 2-C batteries (not included) Cat No. 78040 78049 Description Case Qty Wireless Chime with Pushbutton 24 Wireless Pushbutton Only — Each Each Kit outlet 3 different chime tunes (8 note Westminster, 2 note ding dong & 1 note ding) Weatherproof pushbutton 12V A23 battery included 100 ft. operating range Back Side Plugs Cat No. Description 78045 78049 Plug-in Wireless Chime with Pushbutton Wireless Pushbutton Only Case Qty Each 24 -- Bells Transformers Quality transformers, engineered to ensure long life with bells, buzzers, chimes, door openers, etc. 120 VAC Input Thermally Protected Fits Standard Wiring Knockout Class 2 Energy Limiting Type Quick Clamp mounting feature allows quick & easy installation Satin Aluminum Finish With Snap-On Cover For Easy Installation May Be Operated By 6 VDC or 8-16 VAC Transformer Cat No. 78120 78130 78140 Description 2 1/2" bell 3" bell 4" bell Each Buzzer 144 Cat No. Volts Case Qty 78200 16V10VA 20 78202 16V15VA 20 78204 8V10VA, 16V10VA, 24V20VA 20 78206 16V30VA 30 78208 8V20VA, 16V30VA, 24V30VA 30 78210 24V40VA 30 78212 10V5VA 20 Each Satin Aluminum Finish With Snap-On Cover For Easy Installation May Be Operated By 6VDC or 8-16 VAC Transformer Cat No. 78110 Description Buzzer Each WIRING DEVICES Plastic Pushbuttons Surface Mount Plastic material White color 7/8” X 2-7/8” Cat No. 78231 78232 Type Unlit Lit Lit Stucco Pushbutton Gold Rim Lit Pushbutton 5/8” Diameter Lighted Gold Rim Pearl Button 2-1/2” Diameter Gold Anodized aluminum plate and spring set 5/8" Diameter lighted gold rim pearl pushbutton Chrome finish Each Cat No. 78220 Cat No. Each Decorative Pushbuttons Round Push Buttons 1-3/4” diameter Max 16VDC Traditional, round push Lit Flush Mount 16VDC button Attractive brass finish Unlit, Surface Mount Cat No. Color 78234 78235 Polished Brass Antique Brass Each Fig 1 For new or replacement, wood or metal Brass finish face plate includes 2 brass mounting screws 8-16V AC, 3-6V DC Face Plate: 1-1/4” x 5-7/8” Case: 1-5/16” x 3-5/8” x 1-7/16” Latch: 1-3/8” opening Cat No. Box Qty 70330 1 Fig 2 Fig 3 Reed Switch Electric Door Release Commonly used in Apartments & offices Allows remote opening when energized Reversible for right or left hand doors Normally closed or locked Mortise type Use with 78200 transformer Each Cat No. Color Bag Qty 70501 White 10 Each Door Switch Typically used for closets, dark Fits in 1.25” x 2.75” x 2.0” deep, rooms, walk-in refrigerators approximate mounting hole Push button switch with metal box, Normally on momentary contact cover plate and mounting hard AC/DC SPST ware to operate lights when door 10A/125VAC, 10A.250VAC, is opened 10A/277VAC 1/2HP 125-277VAC Mounts in door jam 6” wire leads Box Qty 1 Each Cat No. Color Fig 78252 78253 78256 White Black Pewter 1 2 3 Each Roller Ball Contacts Triggers an alarm when doors, windows or similar entry-ways are opened SPDT .5 Amp 24VDC Magnetic Switch Normally Closed & Normally Open 3 Terminals Adhesive Backing Cat. No. 70420 Each 78240 Suitable for security & alarm systems, signaling circuits and all types of general low voltage switching applications Used with Doors or Windows Designed to operate when depressed from any angle No mechanical wear, dustproof & corrosion resistant Low Voltage Only 48V AC Max. 1 per box with 2 nickel wood screws 70332 Door Closed - Circuit Off (light off) Door Open - Circuit On (light on) 70334 Door Closed - Circuit On (light on) Door Open - Circuit Off (light off) Cat No. Type 70332 Open Circuit On 70334 Open Circuit Off 70336 Make & Break Circuit Contact Amps Amps Volts AC DC 12 24 48 2 2 1 2 1 0.5 145 METERS Multi-Network Cable Tester Main unit and one remote allow one person testing of T568A, T568B, 10Base-T, and Token Ring Tests & troubleshoots voice communication for open circuits, shorts, miswires, reversals, and split pairs SHIELD detection tests a cable’s shield integrity Easy to read fault display and high speed testing Debug mode for detailed fault identification results Auto sleep mode and power off switch to decrease power consumption Battery low LED indicator Cat No. 57316 Each Coax Network Cable Tester Tests for Coaxial Cable (BNC) Tests for T568A, T568B, 10Base-T, AT&T258A, and Token Ring Cable Automatically checks for open circuits, shorts, miswires and reversals SHIELD detection tests a cable’s shield integrity Easy to read fault display and high speed testing Cat No. 57318 Each LAN Cable Tester & Terminator FEATURES: Specifications: LCD Display 2 Lines by 12 characters with LED back light Connectors: (2) RJ-45 (8P8C) jacks with shields Control Keys (3) :MODE/SEL, ESC and ENTER buttons Power (1) 9v dry cell battery Weight: 180g net Cable Types: Unshielded Twisted Pair (UTP 100 ohms, Cat 3, 4, & 5) Foil screened Twisted Pair (FTP 100ohms and 120ohms, Cat, 3,4,&5) Shielded Twisted Pair (STP 150 ohms IBM Type 1 & 6) 146 Hand-held and easy to operate Easy to read LCD display, with back light Easy to diagnose RJ-45 cables with preset wiring schemes Easy to read cable status, verify cable continuity: open, short, and mismatches Scan pin assignment Automatic cable identification (Cable type search) Standard pin configurations and four (4) user defined cable wirings memorized in CPU Can save user defined cable directly after testing Test for both shielded and unshielded cable types Review the captured pin assignment and failure status Maximum testing length is up to 3000 feet Identify and trace the other end’s ID (with up to 16 individual ID (LCT-T) Battery low indicator Auto power off function Includes carrying case and manual Cat No. 57910 Each METERS 2 in 1 LAN Tester & Multimeter Tests the correct pin configuration of 10 Base-T cable (Cat. 5), 10 Base-2 cable (coax), RJ45/RJ11 modular cables, 356A, TIA-568A/568B and Token Ring cable With remote kit it can test cables up to 300m away, either on wall plate or patch panel Verify the cable continuity, open, short, and cross connect Can test the ground wire Measures DC/AC voltage, DC/AC current, resistance, continuity, and diodes 9 volt & (2) AAA batteries included Size 162mm x 74mm x 44mm Weight 308g Cat No. 57314 Multimeter Specifications Function Voltage DC Max Range Accuracy 600V ±0.5% Voltage AC 600V ±1.2% Current DC 200mA ±1.5% Current AC 200mA ±2.0% Resistance 20MΩ ±0.8% Continuity Test Beep if less than 100Ω Each Tone Generator & Probe Identifies the state in the working telephone line (clear, ring, busy) within a group Designed to identify and trace wires or cables without damaging insulation Identifies polarity of a telephone line Trace & identify wires in a bundle, at a cross-connect point or remote end Can identify split pairs when one wire from a pair has been terminated Used to send or trace a tone Use on twisted pair wiring (telecom/datacom), single conductors. coaxial cables, de-energized AC wiring, & most other wiring The probe identifies the signal from the tone generator through drywall, wood & other non-metallic materials Continuity test Adjustable sensitivity/volume control to increase accuracy Recessed On/Off button prevents battery drain. Send tone frequency: 1.5KHz, Receives frequency range: 100~300 KHz Size: receiver 9.4” x 1.7” x 1”, emitter 5.7” x 1.4” x 1” Weight: receiver 3.7oz., emitter 4oz. Power: 6F22(9V)x1 Cat No. 57320 Each Light Meter Measures both footcandle & Lux Easy to use Pocket Size & Light Weight 3 1/2 Digit LCD Display with Low Battery Indication Resolution To 0.1 Lux Measurement; 1 footcandle = 10.76 lux Measuring Range 200, 2000, 20000, 50000 Lux 20000 Lux: Reading x 10, 50000 Lux: READING x 100 Accuracy: ±5% Rdg ±10 Digits (<10,000 Lux) Accuracy: ±10% Rdg ±10 Digits (>10,000 Lux) Calibrated to Standard Incandescent Lamp 2856K Includes One 12 Volt Battery Photo Detector Dimensions: 4.5” X 2.4” X 1.1” Dimensions: 4.5” X 2.5” X 1.1” Weight: 5.6 Ounces Cat No. 59150 Each 147 METERS Circuit Tester 80-500 Volts AC/DC Economy Twin Lead Tester Ideal for Testing Outlets, Switches and other Electrical Devices Blister Packed Cat No. 59010 Box Qty 24 Each Circuit Tester 90 to 300 Volts AC/DC Bright Neon AC/DC Indicator Pocket Clip Insulated Casing Neon Indicator Glows when the Voltage is Present and Brightens as the Voltage Increases Blister Packed Cat No. 59020 Box Qty 10 Each Circuit Tester Tests Low Voltage 5-50 Volts AC/DC Alligator Clip Test Leads Pocket Clip Indicator Brightens as Voltage Increases Reinforced Casing Cat No. Box Qty 59030 10 Each 4-Way Circuit Tester 110-220-277-460 Volts AC/DC Individual Indicator for each Voltage Assures Reliability Bright Neon AC/DC Indicators Flexible Reinforced Leads Store in Case Convenient Pocket Clip Reinforced Casing Blister Packed Cat No. 59070 Box Qty 10 Each Receptacle & GFCI Tester Instant Display of Wiring Condition of Any Standard 3-Wire AC 110-120 Outlet 59090 Also Trips GFCI Receptacle to Indicate Operational Neon Indicators Give Positive Indication of Current Status Compact Unit Simply Plugs into any Standard 3 Wire/Grounded Receptacle (110–125 Volt AC Circuits) Tests for 6 Circuit Conditions: Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse & Correct Wiring Blister Packed No. 59080 148 59080 59090 Description Receptacle Tester 59090 GFI & Receptacle Tester Box Qty Each 10 10 METERS Screwdriver Probe Voltage Tester 80-250 Volts AC/DC Neon Glow Indicates Live Circuit for 80 to 250 Volt AC/DC No Test Leads Required Pocket Clip Insulated Screwdriver Tip Cat No. 59040 Box Qty 24 Each Voltage Probe & Continuity Tester 12-440 Volts AC/DC No Test Leads Required Tests for Continuity, AC Voltage & Polarity Tests for Continuity without Wire Probes on Non-Energized Circuits Tests from 12 to 440V AC/DC on Energized Circuits LED Indicator Glows when Voltage/Continuity exists Handy Screwdriver Tip, Pocket Clip Cat No. 59050 Box Qty 20 Each Non-Contact Power Detector 70-440 Volts AC No Direct Electrical Contact & No Current Flow Needed Sound & Light Indication of Voltage Tests Electrical Lines, Cables, Sockets, Fuses, Switches & More Checks for Proper Ground Connection Unique Electronic Sensor Locates Breaks Along Live, Insulated Wires & Power Cords Distinguishes Polarity Detects Leaks in Underground Devices Cat No. Box Qty 59110 10 Each Non-Contact Power Detector 100-240 Volts AC Locates breaks along live, insulated wires and power cord Detects voltage at outlet, lighting fixture, circuit breaker, cable Convenient pen size fits into pocket or tool pouch Audible and visual indication 3/16” Detection Distance Cat No. 59112 Box Qty 20 Each Digital Phone Line Tester Built-in LED indicator allows testing of RJ11 4&6 position phone outlets for common trouble conditions such as dead or open lines, reversed polarity, & AC voltage Detects dangerous digital phone lines or surge analog lines Surge suppression circuit protects against voltage spikes & surges Tests 2-Line phone systems Tests for Polarity Uses standard RJ11 jack & plug Cat No. 59180 Box Qty 20 Each 149 METERS Heavy Duty Solenoid Voltage/Continuity Tester Test Voltage from 6 to 600V AC/DC Test Continuity & Polarity Case serves as prod holder for one-hand operation Self-storing prods Positive or negative DC poles identified by LEDs Ergonomic soft PVC housing for comfort grip Two AAA batteries included Cat No. C US Each 59100 Battery, Bulb, Fuse, Continuity Tester Multi-purpose test for Battery, Bulb, Fuse, and Continuity tester Determines if Battery, Bulb or Fuse is still good Audible continuity tester via test probes supplied Reading shows up on clear scale Operated by one 9V 6F22 battery (not supplied) Automatically turns power on and off Dimensions: 5.7” x 2.6” x 1.3” Weight: 5oz. Cat No. Each 59002 Motor and Phase Rotation Indicator A handheld, battery-operated instrument designed to detect the rotary field of three-phase systems and determine motor rotation direction. To operate, place indicator on top of motor, making sure that the indicator propeller of motor is connected. Cat No. 57088 150 Determines the Motor Connection Non-contact Rotary Field indication Determines Rotary Field direction Stand alone direction indicator Wireless Each METERS Circuit Breaker Finder Quickly & easily identifies individual branch circuits at the panel box without interrupting power Find circuit breaker for each outlet by plugging transmitter into wall outlet & then moving receiver over circuit breakers using visual & audible indicators to determine correct breaker Compact receiver unit features adjustable sensitivity for precise location of breaker Visual & Audible Indicators Cat No. 59155 Each Ultrasonic Distance Meter & Wood Stud Finder Laser pointer measures from 2 feet up to 50 feet Easy-to-read LCD display Built-in calculator for measuring areas and volumes Adds linear measurements, area and volume Memory function Choose from meter or foot units Stud finder detects wood up to 3/4” with audio indicator & LCD display Auto calibration stud detection Operated by one 9V battery (not included) Cat No. Each 59120 Voltage/Metal/Wood Detector Finds wood, metal studs and joists behind walls, floors, and ceilings Detects wood up to 3/4” Detects 90-250V within 6” of a hot unshielded wire Auto calibration stud detection 4 LED’s visual and audio indicators Operated by one 9V battery (not included) Cat No. Each 59122 Voltage/Metal/Wood Stud Detector with LCD Display Detects wood, metal & live wire through drywall & other common wall materials Easy to read LCD display & audio signal indicated when target is located Locates & Traces hot wires Continuously detects the presence of AC voltage for safety Detects metal up to 1-1/2” Detects voltage up to 3” Detects wood up to 3/4”, stud deep function detects wood up to 1-1/2” Operated by one 9V battery (not included) Cat No. 59124 Each 151 METERS Pocket Infrared Thermometer with Laser Pointer Auto power off Automatic data hold Low battery indicator Emissivity fixed at 0.95 Basic accuracy ±2% or ±2oC/±4oF Backlit LCD display Check all types of A/C & heating systems. Monitor performance of appliances such as refrigerator, dishwasher, freezer and oven. Optical resolution 6:1 Distance to spot size ratio (measure in 6” area 1’ away) Easy to use, hold it within 2’ of the area to be measured and push the button. LCD screen shows readings in Fahrenheit or Celsius Range: -30o to 270oC/-22o to 518oF Uses selectable oC or oF Laser targeting Two “AAA” batteries 1.5V and manual included Size: LxWxH 3-13/16” x 2-1/4” x 1-3/16” Weight: 2.84oz. Cat No. Each 59114 Professional Infrared Thermometer with Laser Pointer Safely measure hot, hazardous, or hard to reach materials without touching the materials surface; simply pull the trigger & read the temperature Service Applications where temperature plays a role in product quality or equipment maintenance Built-in laser pointer locates exact spot for temperature measurement Fixed emissivity (0.95) covers 90% of surface applications Narrow 12:1 field of view (at 12” distance, measure 1” target) Automatic selection range and Resolution to 0.1o up to 200o, 1o over 200o oC/oF switchable, auto power off & max hold Complete with 9V battery Dimensions/Wt.: 8.9X2.2X6.5”/8ounces Measuring Ranges: -58o to 329oF (-50o to 200oC) with resolution of 34oF/1oC Basic Accuracy ±1.5% of reading Cat No. Each 59116 Cat III Megohmeter Digital Insulation Tester DCV: 1000V ±0.8%, ACV: 750V ±1.2% Resistance: 0-1000MΩ ±3.0%, 1000-2000MΩ ±5.0% 1mA test current for MΩ range for rated voltage Continuity Beeper 200mA short current for continuity range Secondary injection molding case Meets IEC10101, CATIII 1000V Large LCD dual display with backlight Data hold & output voltage lock function Easy to carry testing package over range indication 250V, 500V, 1000V output voltage for insulation MΩ testing Lo Ω function for testing connections Low battery indication Includes 6 AA batteries, test leads and plastic carrying case Size (LxWxH) 7-7/8” x 3-5/8” x 2” Weight 2-1/2lbs. (with batteries) 152 Cat No. 57080 Each METERS Earth Resistance Clamp Meter For testing grounds & bonding. Neither supplementary earth leads nor break earth equipment is necessary. Ground resistance results can be safe and fast only by clamping the ground line. Additionally, current testing is also provided. This high sensitivity clamp meter can measure the leakage current to 1mA & neutral current to 20A RMS. This tester is widely used in the field of electric power distribution, telecommunication, architectural ground & testing industrial electronic equipment. Specification Resistance 0.01Ω high accuracy for low resistance measurement 0.001Ω high resolution Record 99 resistance measurement values Set alarm threshold in 1Ω to 100Ω Measure leakage current and neutral current 1.8” X 1.3” large jaws of exactitude measurement probe Battery capacity indicator Digital measurement, autorange, Double insulation, strengthen the interference resistance One second per test gives quick measurement Display: LCD 3 3/4 digits Current Cat No. Range Accuracy Resolution 0.01Ω ~ 0.999Ω ±1.5%+0.01Ω 0.001Ω 1Ω ~ 9.99Ω ±1.5%+0.1Ω 0.01Ω 10Ω ~ 99.9Ω ±2.0%+0.3Ω 0.1Ω 100Ω ~ 199.9Ω ±3.0%+0.01Ω 1Ω 200Ω ~ 400Ω ±6.0%+5Ω 5Ω 400Ω ~ 600Ω ±10%+10Ω 10Ω 600Ω ~ 1200Ω Approx. 20% 20Ω 100mA ±(2.5% + 1 mA) 0.1mA 300mA ±(2.5% + 2 mA) 0.1mA 1A ±(2.5% + 0.003 mA) 0.001A 3A ±(2.5% + 0.01A) 0.003A 10A ±(2.5% + 0.03A) 0.01A 20A ±(2.5% + 0.05A) 0.03A Each 57276 Cat III Clamp Leaker Meter Measuring Function: AC current Clamp Diameter: max Φ1.22” Display LCD 1999 counts with unit Manual Range: 200mA / 150A Accuracy: ±2.0% Cable Voltage: ≤AC 600V Meet Safety Standard: IEC1010-1 & IEC1010-2-032 600V CAT-lll Power: 2 X 1.5V size AAA Dimension: 7” X 2.3” X 1.1” Weight: 4oz. Cat No. 57278 Each 153 METERS Analog Multimeter AC Voltage: 10/50/250/500V DC Voltage: 2.5/10/50/250/500V DC Current: 500u/10m/250mA Resistance: 2K/200K Ohms Max Battery Test 1.5V & 9V Overload Protection Cat No. 57010 51050 Power Source: One AA (1.5V) Battery Dimensions: 2.5” X 4.0” X 1.25” Weight: 3.4 oz. Accessories: Test Leads, Battery & Instruction Manual Blister Packed Description Multimeter Replacement Test Leads Each Digital Multimeter Transistor Test 1-1000 Overload Protection Power Source: 9V Battery Dimensions: 2.75” X 4.96” X 1.1” Weight: 5.25 oz. Accessories: Test Leads, Battery AC Voltage: 200/600V+/-1.2% DC Voltage: 200mV/2V/200V+/-0.5, 600V+/-0.8% DC Current: 200uA/2000uA/20mA/200mA+/-1.0%, 10A+/-3.0% Resistance: 200/2K/20K/200K/2M+/-0.8% Diode Test: Tests Current 1.0mA, Test Voltage 3V Display: 3 1/2 Digit LCD, Max. Reading 3999 Cat No. 57020 51054 & Instruction Manual Blister Packed Description Multimeter Replacement Test Leads Each Super Mini Digital Multimeter with Rubber Holster FITS IN YOUR SHIRT POCKET AC Voltage: 200/500V+/-1.8% DC Voltage: 200m/2000m/20/200/500V+/-0.5% DC Current: 2m/20m/200mA+/-1.0% Resistance: 200/2000/20K/200K/2M+/-0.8% Diode Test: Tests Current 1.6mA Max, Test Voltage 3V Max Display: 3 1/2 Digit LCD, Max Reading 1999 Continuity Buzzer Cat No. 57050 51052 Battery Test IEC 1010-1 CAT II 500V Power Source: 12 VOLT Dimensions: 1.89” X 3.94” X 1.02” Weight: 1.6 oz. Accessories: Holster, Test Leads, Battery & Instruction Manual Blister Packed Description Multimeter Replacement Test Leads Each Pocket Digital Multimeter with Vinyl Case AC Voltage: 200/450V+/-1.2% DC Voltage: 2/20/200/450V+/-0.5% DC Current: 200mA+/-1.2% Resistance: 2000/20K/200K/2M/20M+/-1.0% Diode Test: Tests Current 1.6mA Max, Test Voltage 3V Max Continuity Buzzer Polarity: Automatic (-) Negative Polarity Indication Zero Adjustment: Automatic Cat No. 57060 154 Overload Protection: 200mA and 0.2 Amp Fuse Protection Display: 3 1/2 Digit LCD, Max Reading 1999 Power Source: 12V A23 EL12 Button Cell Battery Dimensions: 2.24” X 4.27” X .55” Weight: 2.5 oz. Accessories: Case, Test Leads, Battery & Instruction Manual Blister Packed Description Multimeter Each METERS Digital Multimeter with Rubber Holster AC Voltage: 200/600V+/-1.2% DC Voltage: 200m/2/20/200V+/-0.5% 600V+/-0.8% DC Current: 200u/2m/20m/200mA +/-1% 10A +/-3% Resistance: 200/2K/20K/200K/2M +/-0.8% Diode Test: Tests Current 1.0mA Hfe Transistor Test Audible Continuity Test Data Hold Cat No. 57030 51054 Back Lit Overload Protection Power Source: 6F22(9V) X 1 Fuse 200mA/250V IEC 61010-1 CAT II 600V Dimensions: 1.25” X 2.72” X 5.44” Weight: 9 oz. Accessories: Rubber Holster, Test Leads, Battery & Instruction Manual Blister Packed Description Multimeter Replacement Test Leads Each Digital Multimeter with Rubber Holster & Temperature Probe AC Voltage: 200/600V+/-1.2% DC Voltage: 200mV/2V/20V/200V+/-0.5%, 600V+/-0.8% DC Current: 2mA/20mA/200mA+/1%, 10A+/-3% Resistance: 200/2K/20K/200K/2M+/-0.8%, Temperature: 10 to 7520F (-170 to 4000C) +/- 1%+20C, 7540C to 13820F (4010 to 7500 C) +/-2%+20C Diode Test Cat No. 57040 51054 Hfe Transistor Test Audible Continuity Test Data Hold Overload Protection Power Source: 6F22(9V) X 1 Fuse 200mA/250V IEC 61010-1 CAT II 600V Dimensions: 1.25” X 2.72” X 5.44” Weight: 9 oz. Accessories: Rubber Holster, Test Leads, Battery & Instruction Manual Blister Packed Description Multimeter Replacement Test Leads Each Autoranging Digital Multimeter with Rubber Holster AC Voltage: 400m/4/40/400/600V+/-0.8% DC Voltage: 400m/4/40/400/600V+/-0.5% DC Current: 400u/4000/20m/40m/400m/10A+/-2% AC Current: 400u/4000/20m/40m/400m/10A+/-2% Resistance: 400/4K/40K/400K/4M/40M +/0.8%, 2M+/-1% Frequency: 9.999Hz to 9.999MHz+/-3% Autoranging with Manual Ranging Override Diode Test Hfe Transistor Test Cat No. 57044 51056 Audible Continuity Test Data Hold & Range Hold Overload Protection Auto Power Off Power Source: 6F22(9V) X 1 Fuse 200mA/250V IEC 1010-1 CAT II 600V Dimensions: 4.8” X 2.4” X 1.6” Weight: 5.3 oz. Accessories: Rubber Holster, Test Leads, Battery & Instruction Manual Blister Packed Description Multimeter Replacement Test Leads Each 155 METERS Cat lll Digital Multimeter Designed to international safety standard IEC61010-1 CAT III 600V Display: 1999 Counts, Digit is .63” high DC Voltage: 200m/2/20/200V/1000V±0.5% AC Voltage: 200/750V±1.2% DC Current: 200µ / 2m/ 20m / 200mA±1.0%, 10A±3.0% Resistance: 200 / 2k/ 20k / 200k/2MΩ ±0.8% Data hold Diode Test Transistor hFE test Power: 1.5V (AAA) x 3 Size: 6.2” X 2.9” X 1.2” Weight Approx. 7.7oz. (including battery) Cat No. Each 57070 Cat III Autorange Digital Multimeter with Temperature Probe Designed to international safety standard IEC61010-1 CAT III 600V Secondary injection molded case Auto range Maximum value measurement Data hold Back light Continuity Test Auto Power off Diode Test Display: 1999 counts, digit is .63” high Transistor hFE test DC Voltage: 200m/2/20/200/600V±0.7% Power: 1.5V (AAA) x 3 AC Voltage: 200m/2/20/200/600V±0.8% Size: 6.2” X 2.9” X 1.2” DC Current: 200µ / 2000µ / 20m / Weight Approx. 7.7oz. 200mA±1.2%, 2/10A ±2.0% AC Current: 200µ / 2000µ / 20m / 200mA ±1.5%, 2/10A ±3.0% DC Current: (with clamp, optional) :200/2000A (0.1mV/0.1A) ±1.2% AC Current: (with clamp, optional) :200/2000A (0.1mV/0.1A) ±1.5% Resistance: 200 / 2k/ 20k / 200k / 2M / 20MΩ ±1.2%, Temperature: 0o to 1800oF (-20o to 1000oC) ±3.0% Battery Test: 1.5V (test current approx 60mA) 3V (test current approx 30mA) Santoprene is overmolded on 9V (test current approx 12mA) the outer surface for comfort Cat No. 57072 Each Cat III TRMS Autorange Digital Multimeter W/PC Interface DC Voltage: 400mV/4V/40V/400V±0.5%, 100V±0.8% AC Voltage: 4V/40V/400V ±0.8%, 700V±1.2% DC Current: 400µ A/ 4000µ A/ 40mA / 400mA±1.2%, 10A ±2.0% AC Current: 400µ / 4000µ / 40m / 400mA ±1.5%, 10A ±3.0% Resistance: 400 / 4k / 40k / 400k / 4MΩ ±1.0%, 40MΩ ±2.0% Capacitance: 50nF ±5.0% 500nF/5µF/50µF 100µF ±3.0% Frequency: 5Hz/50Hz/500Hz/5KHz/±0.2% Temperature: 4o to 1832oF (-20o to 1000oC) ±3.0% + 2O Duty: 0.1% ~ 99.99% Auto power off Continuity Test Date hold Diode Test RS232 Standard interface Display 3999 counts Auto range and manual range Relative measurement Back light True RMS value 156 Santoprene is overmolded on the outer surface for comfort Cat No. 57074 Each METERS AC Current Clamp-On Adaptor Ideal tool to extend the current ranges for all multimeters 200A AC current clamp-on adaptor with voltage output via standard banana inputs to be connected to multimeters Accessories test leads and carrying case Size: (L x W x H) 3-3/16” x 2-1/2” x 1 1/4” Weight: 2.8oz. Range 200A Output 1mV/A Sensitivity 1A/mV DC Basic Accuracy ±2% Cat No. 57280 Each AC/DC Clamp-On Adaptors Compatible with any test tool, power harmonics analyzer, oscilloscope, multimeter, or other voltage measuring device. Accessories test leads and carrying case and 9V battery Size: (LxWxH) 7-1/2” x 2-3/4” x 3-3/4” Weight: 7oz. 57282 AC/DC current range 2A/100A, Output 100mV/A,1mV/A, Sensitivity 0.01A/mV AC/DC, ±3.0%, ±2% 57284 AC/DC current range 40A/400A, Output 10mV/A,1mV/ A, Sensitivity 0.1A/mV AC/DC, ±3.0%, ±2.5% 57282 57284 Line Splitter Cat No. Range 57282 2A/100A 57284 40A/400A Each Clamp meter measure current from the splitter without destroying the insulation of cable Splits line for independent testing with clamp-on meter “X1” and “X10” testing terminal can be chosen Different standards of plug can be changed Suitable to all kinds of equipment Maximum overload: AC 250V 15A Conforms to the IEC1010 safety standard Dimension: 6.9” X 2” X 1.3” Weight: 4.4oz Cat No. 57286 Each Digital Capacitance Meter For accurate measurement of capacitive components Direct plug-in test sockets & test lead jacks Zero adjustment knob Fuse protected Display: 1999 counts Capacitance: 200p/20n/200n/2µ/200µF±0.5% 2000µF±1.0%, 20mF±2.0% Power: Battery 6F22 (9V) x 1 Size: 3.6” x 7.4” x 1.2” Weight: approx. 8.4oz. Includes test leads, manual, & 9V battery Cat No. 57085 Each 157 METERS CAT III Autoranging 400A AC Slimline Clamp Meter Voltage DC 600V with basic accuracy ±(0.5%+5d) Voltage AC 600V with basic accuracy ±(0.8%+5d) Current AC 400V with basic accuracy ±(2.50%+6d) Resistance 20MΩ with basic accuracy ±(1.0%+4d) Continuity buzzer sound at 300Ω Diode test current 0.3mA; Open circuit voltage 1.5V Accessories: test leads, carrying case, 2(AAA) 1.5V batteries Size:(LxWxH) 8-1/16” x 2-3/4” x 1-1/2” Weight: 7oz. 2000 LCD display counts Decimal Point Readings Display with backlight Data hold Max hold Cat No. Each Auto power off 57250 Low battery indication 400A Digital Clamp Meter with Temperature Probe AC Current: 200A+/-1.5%, 400A+/-2.0% AC Voltage: 600V+/-1.5% DC Voltage: 600V+/-1.0% Resistance: 2000K+/-1.0% Temperature Range: -4o to 500oF (-20o to 260oC) +/-3%, Fo & Co Selectable Easy Single Rotary Switch for any Function Selection Jaw Opening To 1.06” Continuity Buzzer Data Hold for all Functions Overload Protection for all Ranges Diode Test: Tests Current 1.4mA Max, Test Voltage 2.8V Max Display: 3 1/2 Digit LCD, Max Reading 1999 Power Source: 9 Volt Battery Dimensions: 8.07” X 1.73” X 1.57” Weight: 7.0 Ounces Accessories: Carrying Case, Test Leads, Temperature Probe, Battery & Instruction Manual Cat No. 57200 51056 Description 400A Clamp Meter Replacement Test Leads Each CAT III 1000A Digital Clamp Meter with Temperature Probe Conforms to IEC61010-1 Cat III Display: 3-1/2 digits with max. 1999 counts Data hold function Back light function DC voltage: 1000V ±1.0% AC voltage: 750V ±1.0% AC current: 20A/200A/1000A ±2.0% Resistance: 200/2000Ω ±1.0% Temperature Range: -40o to 1350oF (-40o to 750oC) ±1.0% Fast Continuity Beeper Diode Test Jaw Opening to 1.66” max. 158 Cat No. 57254 Each METERS Cat III TRMS Autoranging 600A AC Digital Clamp Meter DCV: 6/60/600V ±0.8%, 1000V ±1.0% ACV: 6/60/600V ±1.0%, 700V ±1.2% ACA: 600A ±2.5% Resistance: 600/ 6k/600k/6MΩ ±1.0%, 60MΩ ±5.0% Capacitance: 600n/6µ/60µ/600µ/1000µF±4.0% Frequency: 40Hz to 100kHz ±0.1% ADP measurement: 600mV±3.0% Max. diameter for conductor: Φ 1.66” Secondary injection molding case Conform to the IEC61010-1 & IEC61010-1-032 standard Double insulation (protection class 600V CAT III and pollution degree 2) True RMS for AC voltage and current Santoprene is overmolded on the outer surface for comfort Cat No. 57260 Display: 6000 counts Decimal Point Readings Auto/Manual range Data hold function Max/min function Back light function Clamp light Auto power off Continuity test Diode test SMT application Power: 1.5V/AAA x3 Dimensions: 8.9” X 3.4” X 1.3” Weight: 11.2oz. Each Cat lll TRMS Autoranging 400A AC/DC Digital Clamp Meter DCV: 4/40/400V ±0.8%, 1000V ±1.0% ACV: 4/40/400V ±1.0%, 700V ±1.2% DCA: 400/1000A ±3.0% ACA: 400A ±2.5% Resistance: 400/ 4k/40k/400k/4MΩ ±1.0%, 40MΩ ±2.0% Frequency: 40Hz to 100kHz ±0.1% (from test terminal) 40Hz to 400kHz ±0.1% (from current clamp) Conform to the IEC61010-1 & IEC61010-1-032 standard Double insulation (protection class 600V CAT III and pollution degree 2) True RMS for AC voltage and current Max. diameter for conductor: Φ 1.66” Secondary injection molding case Santoprene is overmolded on the outer surface for comfort Cat No. 57262 Display: 3999 counts Decimal Point Readings Auto/Manual range Auto zero key for DCA Data hold function Max/min function Back light function Jaw lighting Auto power off Continuity test Diode test SMT application Power: 1.5V/AAA x3 Dimensions: 8.9” X 3.4” X 1.3” Weight: 11.2oz. Each CAT III Autoranging 200A Open Jaw Clamp Meter Open jaw digital electrical tester Diode test Continuity test Duty cycle test function Auto and manual range Relative Measurement Data hold Backlit auto off time limit mode Test leads and back storage Backlight auto off time limit mode Display: 3999 counts Decimal Point Readings Meets IEC61010-1 concerning safety requirements DCV: 4/40/400V±0.7%, 1000V±0.8% ACV: 4/40/400V±0.8%, 700V±1.0% ACA: 200A±3.0% (50Hz to 400Hz) Resistor: 400/4K/40K/400K/4MΩ ±1.2%, 40MΩ ±2.0% Capicitance: 40n/400n/4µF ±4.0% Frequency: 10Hz to 100KHz ±2.0% Duty Cycle: 0.1% to 99.9% Power: Battery 6F22 (9V) X 1 Size: 7.6” X 2.7” X 1.7” Weight: Approx. 9.2oz. Cat No. 57266 Each 159 METERS Cat lll TRMS Autoranging Digital Power Clamp Meter AC, W, VA, VAR, kWh and PE temperature measurement Max count 9999 and double scales analogue bar graph display 99 hours digital calculagraph for active energy measurement Single chip micro controller can deal with measurement, time, autorange switching control TRMS value, max value, min value measurement Display kWh measurement value and measuring time in active energy mode High function, low price and widely used power clamp meter Max Conductor size AC Current AC Voltage Active Power Apparent Power Power Factor Reactive Power Active Eneregy Frequency Φ 1.97” (A) (V) (kW) (kVA) (PF) (KVAR) (kWh) (Hz) Temperature Display Power Supply Operating Temperature Dimensions Weight Data hold Back Light o 40/100/400/1000A ±2% 100/300/600V ±1.2% 4/10/40/100/600 kW ±3% 4/10/40/100/600 kVA ±3% 0.3 cap to 0.3 ind ±.02 4/10/40/100/600 kVAR ±4% 10/100/1000/10000 kWh ±3% 20Hz ~ 1000Hz ±0.5% F -58~572oF ±5.5oF, -572~2372oF ±1% 4 digit LCD 9999 4 X 1.5V AA 0oC ~ 40oC 11.8” X 4.1” X 2” 17.5oz. Cat No. 57270 Each Cat lll TRMS Autoranging 3 Phase Digital Power Clamp Meter 160 Power measurement of 3-phase 3-wire, 3-phase 4-wire, single-phase mode V, A, W, VA, VAR, kWh, PF, Hz measurement Double Display two parameters on each menu and store 28 groups of measurement parameter Measure total power value and five power parameters of each phase in 3-phase measurement mode respectively. Autorange and terms display With PCRS232 interface and windows graphics software Display measurement time and select tested signal power supply for the clamp at one time, the instrument can measurement for long time Large LCD display, multifunctional button control Max Conductor size AC Current AC Voltage Active Power Apparent Power Power Factor Reactive Power Active Eneregy Frequency Display Power Supply Operating Temperature Dimensions Weight Data hold Back Light Φ 1.97” (A) 40/100/400/1000A ±2% (V) 100/300/600kW ±1.2% (kW) 4/10/40/100/600 kW ±3% (kVA) 4/10/40/100/600 kVA ±3% (PF) 0.3cap to 0.3 ind ±.02 (KVAR) 4/10/40/100/600 kVAR ±4% (kWh) 10/100/1000/10000 kWh ±3% (Hz) 20Hz ~ 1000Hz ±0.5% 4 digit LCD 9999 4 X 1.5V AA 0oC ~ 40oC 11.8” X 4.1” X 2” 17.5oz. Cat No. 57272 Each TOOLS Cushion-Grip Screwdrivers Made of highest quality tempered steel Heat treated for maximum strength Shafts have integral flanges that provide an extra-strong, torque-proof anchor in the handle Strong, durable black tips are forged & precision ground to fit screw openings securely Cushion grip handle allows for greater torque & comfort, have color coded ends & are oil, gas & water resistant Premium chrome plated for smooth feel & corrosion resistance Meets or exceeds ANSI specifications Slotted Screwdriver Cat No. Shank Tip Width 54102 54104 54106 54108 54110 1/4” 7/32” 1/4” 1/4” 3/8” Cabinet-Tip Screwdriver Shank Length Overall Length Box Qty 1-1/2” 3” 4” 6” 8” 3 5/8” 6 3/4” 8 1/4” 10 1/4” 12 3/4” 12 12 12 12 6 Each Cat No. Shank Tip Width 54112 54114 54116 Phillips Screwdriver Cat No. Point size Shank Length Overall Length Box Qty 54122 54124 54126 54128 No. 2 No. 1 No. 2 No.3 1-1/2” 3” 4” 6” 3 1/2” 6 3/4” 8 1/4” 10 3/4” 12 12 12 6 1/8” 1/8” 1/8” Shank Length Overall Length Box Qty 3” 4” 6” 5 3/4” 6 3/4” 8 5/8” 12 12 12 Each Square Recess Screwdriver Each Shank Cat No. Point size Color Code Length 54132 No. 0 yellow 4” 54134 No. 1 green 4” 54136 No. 2 red 4” 54138 No.3 black 4” Overall Length 8 1/4” 8 1/4” 8 1/4” 8 1/4” Box Qty 12 12 12 12 Each Nut Driver Shank Overall Cat No. Hex Size Color Code Length Length 54142 3/16” black 3” 7 1/4” 54144 1/4” red 3” 7 1/4” 54146 5/16” yellow 3” 7 1/4” 54148 11/32” green 3” 7 1/4” 54150 3/8” blue 3” 7 1/4” 54152 7/16” brown 3” 7 1/4” 54154 1/2” red 3” 7 1/4” Box Qty 6 6 6 6 6 6 6 Each 161 TOOLS 6 in 1 Interchangeable Screwdriver Set 8 in 1 Telescoping Pickup Tool Screwdriver Set 18” Telescoping Pick-Up Tool 6 Sizes Double Ended Bits 3/16” & 1/4” #1 & #2 5/16” & 1/4” Cat No. 54212 Box Qty 6 3/16” #1 1/4” #2 T-15 #3 T-20 Each 6 Piece Screwdriver Set 3/16” X 3” 1/4” X 4” 3/16”X 6” 5/16”X 6” #1 X 3” #2 X 4” Cat No. Box Qty 54214 6 Each 7 Piece Nut Driver Set 3/16”X 3” 1/4” X 3” 5/16”X 3” 11/32” X 3” 3/8”X 3” 7/16” X 3” 1/2”X 3” Plastic Carrying Case Cat No. Box Qty 54216 6 Cat No. Box Qty Each Each 40 Piece Ratchet Driver Socket & Bit Set 54218 19 - in - 1 Interchangeable Ratcheting Screwdriver Set 1-Reversible Ratcheting Driver 1-Mini Driver 1-1/4” Dr. Adapter 1-3/16” (L) 23 - Bits 1-3/16” (L) 14 - Nutdriver Bits Nut Driver Shank 5/16” x 1/4” Ratcheting driver with 7/16” nut 8pc 3” Double ended Bits Slotted 5/16” x Phillips #3 Slotted 1/4” x Phillips #2 Slotted 3/16” x Phillips #1 Star T10 x Star T15 Star T20 x Star T25 Square S1 x Square S2 Hex 5/32” x Hex 1/8” Hex 3/16” x Hex 1/4” 3/16” 1/4” 9/32” #1 #2 #3 S-1 S-2 1/16” 5/64” 3/32” 1/8” 5/32” 3/16” 7/32” 1/4” T-10 T-15 T-20 T-25 T-27 T-30 T-40 Nutdriver Bit SAE: 3/16” 1/4” 5/16” 11/32” 3/8” 7/16” 1/2” Nutdriver Bit Metric: 6mm 7mm 8mm 9mm 10mm 11mm 12mm 162 Cat No. Box Qty 54220 4 Each 6 3/16”& #1 T20 & T25 5/16”& 1/4” & #2 S1 & S2 7/16” 5/16”& #3 5/32”& 1/8 T10 & T15 3/16”& 1/4 Cat No. Box Qty 54222 6 Each 1/4” TOOLS Ergonomic Cushion Grip Screwdrivers 1000 Volt Cushion Grip Insulated Screwdrivers Professional Quality Comfort Cushion Grip Chrome Molybdenum Vanadium Steel for extra strength Impact resistant, oil & acid resistant handles Blade surface has satin finish and tough heat treatment Blade has strong magnetic black tip Includes plastic hanger for pegboard hanging 1000 Volt Rated Professional Quality Comfortable ABS & Neoprene Cushion Grip Impact Handle is oil & acid resistant VDE Tested to ensure 100% safety S2 Steel Blade for Extra Strength Blade has a Strong Magnetic Tip Includes Plastic Hanger for Pegboard Hanging Safety Red for Quick Identification Cat No. Each Size Blade Tip Box Qty Each 52112 1/4” x Stubby Slotted Wide Tip 52114 5/32” x 3” Slotted Wide Tip 12 12 52116 1/4” x 4” Slotted Wide Tip 12 52118 5/16” x 6” Slotted Wide Tip 12 52120 5/16” x 8” Slotted Wide Tip 12 52122 5/32” x 3” Slotted Narrow Cabinet Tip 12 Cat No. 52012 52014 Size 3/32 X 3” 5/32 X 4” Blade Slotted Slotted Box Qty 12 12 52124 1/4” x 6” Slotted Narrow Cabinet Tip 12 52016 7/32 X 5” Slotted 12 52126 1/4” x 8” Slotted Narrow Cabinet Tip 12 52018 1/4 X 6” Slotted 12 52128 52020 5/16 X 7” Slotted 12 52130 #1 x 3” Phillips Tip 12 52024 #1 X 3” Phillips 12 52132 #2 x 4” Phillips Tip 12 52026 #2 X 4” Phillips 12 52134 #3 x 6” Phillips Tip 12 52028 #3 X 6” Phillips 12 52142 4” Awl Pointed Tip 12 1000 Volt Insulated Screwdrivers 6 Pack Box QTY #2 x Stubby Phillips Tip 12 Ergonomic Cushion Grip Screwdrivers 7 Pack Box #52090 6 Pack Box Includes: Cat No. Size Blade Qty # 52190 7 Pack Box Includes Cat. No. Size Blade Tip 1 1 52012 52014 3/32 X 3” 5/32 X 4” Slotted Slotted 1 1 52114 52116 1 52016 7/32 X 5” Slotted 1 1 52018 1/4 X 6” Slotted 1 52024 #1 X 3” Phillips 1 1 1 52026 #2 X 4” Phillips Cat No. 52090 Description 6 Pack Box Qty 24 Each 5/32”x3” 1/4”x4” Slotted Tip Slotted Tip 52118 5/16”x6” Slotted Tip 52120 52130 5/16”x8” #1 x 3” Slotted Tip Phillips Tip 1 52132 #2 x 4” Phillips Tip 1 52134 #3 x 6” Phillips Tip Cat No. Description Box Qty 52190 7 Pack 20 Each 1000 Volt Insulated Precision Screwdriver Set 1.5 X 2” 1.8 X 2” 2.0 X 2” 2.5 X 3” 3.0 X 3” 00 X 2” 0 X 2 3/8” 7 piece set includes plastic case with see thru lid Blade made of high alloy special steel Rotating cap for precise turning & control with fingertip Comfortable ABS & Neoprene Cushion Grip Impact Handle is oil & acid resistant VDE Tested to ensure 100% safety Cat No. 54232 Box Qty 12 Each 163 TOOLS 10 Piece High Impact Screwdriver Set Ergonomic Cushion Grip Screwdriver 29 Piece Magnetic Bit Set Meet all your Screwdriver needs with this one Set 3/16” X4” 5/16”X6” 1/4” X5” 3/8”X7” 1/4” x 1/2” #1 X 3” #3 x 5” #2 X 4” #2 x 1/2” 18” Pickup Tool High Impact Screwdriver has been ergonomically designed. The shaft is continuous from top to bottom & has been created using impact-resistant and coldresistant steel material made from CRM ova Use on any metal or non-metal such as steel, wood, porcelain, mineral...etc Can use it as a punch, chisel, screwdriver, & pry bar Can use with a wrench for more torque It can take 3000G impact of hammer Cat No. 54236 Case Qty 12 sets Professional Quality, Impact Handle is oil/acid resistant Comfortable ABS & Neoprene Cushion Grip Set Contents in Plastic Blowmold Case: 1-Magnetic driver 1-Bit Holder 1-1” socket adapter 1” CrVa bits listed below 4 - Phillips Bits (PH) 0. 1. 2. 3 4 - Pozi Bits (PZ) 0. 1. 2 . 3 6 - Hex Bits (HEX) 3/32 1/8 5/32 3/10 7/32 1/4 4 - Slotted Bits (SL) 5/32 3/16 1/4 9/32 5 - Star Bits (TX) T10 15 20 25 30 3 - Square Bits (R) 0. 1. 2 Each Cat No. Case Qty 52172 24 Sets Each T-Handle Hex-Keys Hex-Key Sets Handy sets fit your pocket or tool box easily and help eliminate the lost-key problem Keys are tough, heat-treated alloy steel for strength and durability & fold into handle Can be used straight out or at an angle for extra leverage Durable steel case doubles as a handle 10 pcs per inner box, 100 pcs per master box Cat Handle Key No. Description Length Lengths 54312 Nine-key inch set:5/64”, 4-1/4” 1-3/4” - 3-1/2” 3/32”, 7/64”, 1/8”, 9/64”, (108mm) (44mm-89mm) 5/32”, 3/16”, 7/32”, 1/4” 54314 Eight-key inch set: .050”, 3-1/16” 1-1/2” - 2-3/8” 1/16”, 5/64”, 3/32”, 7/64”, (78mm) (38mm-60mm) 1/8”, 9/64”, 5/32” 54316 Five-key inch set: 3/16”, 5-1/4” 3”- 4-5/8” 7/32”, 1/4”, 5/16”, 3/8” (133mm) (76mm-117mm) 54318 164 7 Key metric 3-5/8” 1.5mm, 2mm, 2.5mm (92mm) 3mm, 4mm, 5mm, 6mm 54320 7 piece torx (star) 4-1/4” T10, T15, T20, T25, T27, (108mm) T30, T40 1-5/8 - 3” (41 - 76mm) 2-1/8 - 3” (54-76mm) T-handle design delivers more torque to the fasteners Cushion grip handle molded onto L-shaped blade Ergonomic handle for maximum comfort & strong torque Smooth edges prevent injuries & eliminates pressure marks Blade is hardened, nickel plated, S2 high quality steel Hole for hanging Measurement = Inches Cat No. A B C 54322 3/32 3.94 3.15 54326 1/8 3.94 3.15 54330 5/32 5.91 3.15 54332 3/16 5.91 3.94 54336 1/4 5.91 3.94 54338 5/16 7.88 3.94 54340 3/8 7.88 4.72 54342 1/2 7.88 4.72 Each TOOLS High Leverage Cushion Grip Ergonomic Pliers Long Nose Pliers Chrome vanadium steel drop forged induction hardened cutting edges Special high leverage design for cutting power Soft material ergonomic grain design for comfortable, durable, non-slip grip Meets standard cutting & load test Serrated jaws provide an excellent gripping surface Lay-on joint Spring loaded (except groove joint & slip joint pliers) for more comfort & higher frequency cutting Groove joint pliers have precision milled ribs to assure smooth, positive interlock Linesman Pliers Slip Joint Pliers Diagonal Cutting Pliers Cat No. 54032 54034 Groove Joint Pliers Description Long Nose Pliers Long Nose Pliers Length 6” 8” Box Qty 6 6 54036 Linesman Pliers 8” 6 54038 Diagonal Cutting Pliers 7” 6 54040 Slip Joint Pliers 8” 6 54042 Groove Joint Pliers 10” 6 Each 1000 Volt Insulated Safety Pliers Long Nose Pliers Bent Long Nose Pliers Linesman Pliers Diagonal Cutters Professional Quality EN60900 VDE Tested to Ensure 100% Safety Meets OSHA IEC & ASTM standards Safety Ergonomic Soft Handle Drop Forged & Heat Treated Chrome Vanadium Steel Blade has a Strong Magnetic Tip Induction Hardened Cutting Edges Wire Strippers Cat No. 54012 54014 Description 1000v Insulated Long Nose Pliers 1000v Insulated Long Nose Pliers Length 6” 8” Box Qty 6 6 54016 1000v Insulated Bent Long Nose Pliers 8” 6 54018 1000v Insulated Linesman Pliers 8” 6 54020 1000v Insulated Diagonal Cutters 7.5” 6 54024 1000v Insulated Wire Strippers 7” 6 Each 165 TOOLS Lineman Pliers with Cutter and Crimper High-leverage tool with crimping die and side cutters Crimping die at the hinge for crimp sleeve connectors Comfort grip handles Cat No. 54052 Length 9.5” Box Qty 6 Case Qty 36 Each End Cutting Crimping Pliers Designed for crimping non-insulated solderless terminals 10-22Awg Specially hardened wire cutter in nose Forged high carbon steel Tapered nose for working in confined spaces Red plastic-dipped handle for comfort Cat No. 54054 Length 8” Box Qty 8 Case Qty 72 Each Heavy Duty Adjustable Wrench with Cushion Handle Chrome vanadium steel drop forged Torque excess 25% than standard Inch Measuring Scale Ergonomic design for comfortable grip Lightweight design reduces fatigue Extra long & wide jaw for tight & hard reach areas Wide Handle Thickness Ergonomic and wider handle design can reduces the pressure on your hand and makes it comfortable and easy to use Weight Reduce Light weight design reduces fatigue Measurement Inch measuring scale can easily size the bolt & nut Wide Jaw Opening Wide capacity design makes the wrench work on larger bolts & nuts Extra Long Jaw Length Extra long and wide jaw for tight and hard to reach areas Cat No. Length Jaw Opening Box Qty Case Qty Each 54062 6” .94” 6 72 54064 8” 1.13” 6 48 54066 10” 1.30” 6 36 54068 12” 1.52” 4 24 Curved Claw Hammer with Fiberglass Handle Polished, forged tempered - steel head Comfortable TPR grip bonded to handle High-Strength fiberglass shaft absorbs shock & keeps head tight Durable plastic-alloy jacketing helps to protect neck from fraying or splintering if incorrectly struck or overstruck 166 Cat No. 54072 Description 20 oz Claw hammer Box Qty 6 Case Qty 36 Each TOOLS 12/2 & 14/2 NM Cable Stripper/Cutter 12/2 & 14/2 stripping slots quickly remove outer jacket of Type NM-B non-metallic sheathed cable Precision ground stripping holes easily remove insulation on 12 & 14 AWG lead wires Bolt cutter 6-32, 8-32, 10-32 Copper wire cutter has precision shear-type blade Strong gripping serrated nose for easy bending and pulling of wires Narrow nose fits into tight places Holes in jaw for quick wire looping and bending Spring-loaded for self-opening action Opening stop prevents spring from disengaging Stainless steel body for maximum corrosion resistance Laser etched markings for high visibility Ergonomic, cushioned handles for ultimate comfort & control Cat No. 54432 Length 7 1/4” Box Qty Case Qty 10 60 Each Wire Stripper & Cutter and Bolt Cutters 10-20 AWG precision ground stripping holes easily remove insulation Copper wire cutter has precision shear-type blade Bolt cutters 6-32, 8-32, (10-32 - only 54428) Strong gripping serrated nose for easy bending and pulling of wires Narrow nose fits into tight places Holes in jaw for quick wire looping and bending Spring-loaded for self-opening action Opening stop prevents spring from disengaging Stainless steel body for maximum corrosion resistance (54428) Chrome tin plated body for maximum corrosion resistance (54426) Lock tab protects cutting edge during storage (54426) Laser etched markings for high visibility Ergonomic, cushioned handles for ultimate comfort & control 54426 54428 Cat No. Length Handle 54426 54428 7 3/8” 6 3/4” Curved Straight Box Qty Case Each 10 10 60 60 5 In 1 Stripper/Crimper/Cutter 10-20 AWG precision ground stripping holes easily remove insulation 10-22 AWG insulated & non-insulated terminal crimper #310, 311, 410, 411 and coax crimper Copper wire cutter has precision shear-type blade Bolt cutters 5-40, 10-24, 4-40, 6-32, 8-32, 10-32 Strong gripping serrated nose for easy bending and pulling of wires Narrow nose fits into tight places Holes in jaw for quick wire looping and bending Stainless steel body for maximum corrosion resistance Laser etched markings for high visibility Ergonomic, cushioned handles for ultimate comfort & control Cat No. 54430 Length 8 1/4” Box Qty Case Qty 10 60 Each 167 TOOLS Adjustable Stripper with Spring & Lock Hardened carbon steel with oxide finish Pivot joint has hardened steel bushing Soften plastic anti-slip cushioned grip Precision ground blades for consistent stripping and cutting Adjustable setting allows ease of use to eight settings 10-24 Awg Wire Size Cat No. 50130 Length 5” Box Qty 20 Each Wire Cutter Rust resistant Hardened carbon steel cutter with oxide finish Return spring Pivot joint has hardened steel bushing Soften anti-slip cushioned grip Precision CNC ground fabricated blades Cuts 30-10 AWG copper wire Cat No. Length Box Qty 54414 6.5” 10 Each Wire Stripper & Cutter Precision ground blades ensure consistent stripping & cutting Heat-treated for long life Cushioned-grip handle for comfortable use Serrated nose grip handle for comfortable use Stamped from high-carbon tool steel Pivot joints have hardened steel bushings Rust-resistant black oxide finish Hole in jaws for looping wires Opening stop prevents spring from disengaging Lock tab protects cutting edge during storage Easy-to-read graphics 10-20 AWG wire size Cat No. 54422 Length 6.5” Box Qty 10 Case Qty 60 Each 5-In-1 Stripper/Crimper/Cutter Extra-narrow nose for getting into tight places Machined stripping stations with a positive stop provide precise stripping diameters Wire looping holes in jaw 10-22 Awg Strippers Bolt Cutter 5-40, 10-24, 4-40, 10-32, 8-32, 6-32 Insulated & non-insulated terminals 10-22 Awg Ignition Terminals Wire Cutter Smooth, rounded pivot bolt won’t catch in tool pouch Easy-to-read graphics Comfortable, cushioned grips 168 Cat No. Length Box Qty Case Qty 54424 8” 10 60 Each TOOLS Round Cable and Wire Cutter Round cable and wire cutter cuts coaxial cable up to RG-9U Cuts multi-conductor cable up to 0.5” Cuts solid or standard wire up to #8 AWG Has a built in return spring Locking latch Soft handles for a comfortable grip Frame made from stamped, hardened steel with curved cutting blades Cat No. 54434 Each 100 Pair Group Cutter Cuts round communication cable - 2/0 cable, 100 pair group telephone cable and RG-174/RG-9 coax cable Maintains cable geometry for better cable performance Cuts like a tool twice its size Precision ground cutting blades Rust resistant black oxide finish Frame is stamped from high carbon steel & heat treated for long life Built-in return spring Plastic molded handles Safety lock to keep the tool blades closed and pouch ready Cat No. 54436 Center Conductor Cutter Each Precisely trims the center conductor of coaxial cable to a standard length of 3/16” for proper insertion into a dual crimp coax connector Stamped from high carbon tool steel Heat-treated for long life Cushioned handle grip Rust resistant black oxide finish Cat No. Each 54438 Impact Punch Down Tool 66 Blade 66/110 Blade 110 Blade For seating wire into terminated blocks & cutting off wire end after termination Spring loaded for fast & low-effort wire seating termination Effortless punch down tool impact absorbing cushioned Grip reduces operator stress for high volume installers Adjustable high/low action setting Spare blade storage compartment with unique locking device Cat No. 54562 54564 54565 54566 Description Punch Down Tool with 110 blade 66 Blade 110 Blade 66/110 Blade Each 169 TOOLS Professional Automatic Wire Stripper Auto-adjusting stripper and terminal crimper One-step stripping action reduces stripping time for increased productivity Spring action mechanical advantage increases stripping leverage and reduces operator fatigue Advanced sintered material blades and sturdy diecast frame provides long, trouble free life Cuts 10-24 AWG Strips 8-30 AWG Length gauge facility ensures uniform stripped ends Crimps insulated/non-insulated/open barrel terminals Cat No. 54442 Length 8” Box Qty Case Qty 10 60 Each Professional Waterproof Connector Crimping Tool Cuts Adjustable Ratchet mechanism RG 58/59/62/6 (3c/4c/5c) Adjustable type Terminates F, RCA & BNC fittings Built-in cable cutter Smooth one-cycle full ratchet mechanism Emergency Ratchet release lever Rugged carbon hardened steel construction Comfortable grip handles for reduced hand fatigue Cat No. 54444 Length 9.1” Box Qty 10 Each Economy “F” Connector Crimping Tool Terminates ‘F’ connectors for RG6, RG59, RG62, & Belden 8281 cable Cat No. 54448 Length 7 1/2” Box Qty 10 Each Economy Crimper/Stripper Screw & Wire Cutter Strips and cuts 10-22 AWG wire Cuts & rethreads 4-40, 6-32, 8-32, 10-24, & 10-32 bolts Accurate crimping of bare & insulated terminals & crimps sleeves Cushioned grips for comfort Color-coded dies correspond to color of terminal insulation to assure proper die selection Cat No. 50160 170 Length 8” Box Qty 25 Each TOOLS Professional Telephone Crimp/Cut/Strip Tool Cuts, strips, crimps Precision casting jaw Rust resistant high carbon steel frame Handle lock Safety cover TPR handle for comfort Ergonomically designed handle Cat No. 54462 Description RJ-11/6P4C, RJ-12/6P2C, 6P2C Box Qty 10 Case Qty 60 54464 RJ-45/8P8C 10 60 Each Professional Dual Modular Plug Crimping Tool Multi-functional telephone tool crimps, cuts and strips for easy on-the-job tool application Steel frame is made of top quality carbon steel & heat-treated by HRC45o for dependable long life Ratchet crimp tool for RJ-22 (4 positions) RJ-11 (6 positions) and RJ-45 (8position) modular plugs Cat No. 54472 Description Ratchet Crimp RJ11, RJ45, & RJ22 Box Qty 10 Each Smart Vise Crimper #1 Energy Saving Crimping Plier in the World 54499 54491 54494 54496 54492 54495 54497 54493 Less push strength up to 30% Long arm for one or two hand operation Adjustable wheel for crimping pressure Crimping release knob & handle lock Interchangeable crimping modules Ergonomically designed handle Less fatigue with HRC 48o ~ 52o middle carbon steel body with comfortable TPR handle when there are long crimping times Length: 9-3/4” Weight: 19oz. Cat No. Description Box Qty Case Qty Each 54482 RG59/RG6 Coax Crimper with Dies 6 36 54484 Insulated Terminal Crimpier with Dies 6 36 54491 Insulated Terminal Die Only 1 — 54492 Non-Insulated Open Barrel Connector Die Only 1 — 54493 Non-insulated Terminal Die Only 1 — 54494 RG-58, RG-58/62 Die Only 1 — 54495 RG-59, RG-6 Die Only 1 — 54496 RJ-45 Die Only 1 — 54497 Cord End Terminal Die Only 1 — 54499 Crimper with 6 Dies in Case (54491~54496) 1 20 171 TOOLS Rotary Coax Strippers For RG58, 59, 62, 6 2 Blade One Pocket-Sized Stripper Body Enables The Technician Who Works with a Variety of Cable and Connectors to Get Fast, Quality Multi-Level Strips in One Operation Just Insert the Cable, Lock the Blade Cartridge in Place, Twist & Pull Blister Packed 54504 54512 Cat No. 54504 54512 Box Qty 20 25 Each UTP/STP & Flat Cable Stripping & Cutting Tools 54508 54518 flat cable & For round Cat3 & Cat5e (UTP & STP) & other multi-conductor computer cables Computer cable, speaker cable, intercom cable, SPT-1, SPT-2, phone wire & alarm wire Irregular Out: shape insulation can be put into the front “V” and “U” guide Rotate the tool 1-3 times by index finger for stripping the outer insulations easily Adjustable knob for fitting different cable sizes Cat No. Multi-Conductor OD Range Box Qty 54508 54518 .102”-.315” .138”-.354” 20 10 Each Easy Stripper for UTP/STP Telecom Wire Quickly & easily strips UTP/STP & Telecom Wire without scoring the individual conductor Compact design for easy handling Tension release lever for easy positioning & release of cable For stripping Wire Diameter Φ.197”-.244” (5-6.2mm) Made of poly-resin Cat No. 54514 PVC Pipe Cutter 50110 & 50112 50115 172 Box Qty 50 Each Metal Construction, Makes Clean, Burr-Free Cuts Through PVC Ratchet-Action Design For Maximum Cutting Power with Little Effort 50110 & 50112 are Blister Packed Cat No. 50110 Description Medium-Duty Max Cutting Diameter 1” 50112 Heavy-Duty 1 1/4" 50115 Heavy-Duty 2” 51010 Replacement 50110 Blades 51012 Replacement 50112 Blades 51014 Replacement 50115 Blades Each TOOLS Aviation Tin Snips Non-slip serrated edges & non-slip textured grain cushion grip Cuts up to .047” cold rolled steel or 0.028” stainless steel Makes long fast cuts in paper, plastic, sheet metal, aluminum, vinyl siding, screening & much more Chrome-Molybdenum alloy steel induction hardened forged blades for greater strength and longer durability Hang-up hole provided for convenient storage New quick and simple spring-free automatic latch design (one hand release) provides safety and convenience Special hardened and tempered process refines the steel’s grain size providing enough strength to cut KEVLAR® Cat No. Description 54352 54353 Aviation Tin Snip Left Cut Aviation Tin Snip Right Cut Box Qty Case Qty 6 6 36 36 54354 Aviation Tin Snip Straight Cut 6 36 Each Lock Grip Pliers 1-7/8” jaw capacity adjusts easily to lock at any size with desired amount of pressure Quick release lever opens jaws fully & removes pressure instantly Can also be used as non-locking pliers Top-Grade alloy steel, heat treated for maximum strength and durability Nickel plated finish Can be used as hand vise, pipe wrench, clamp, pliers, etc. 10” Curved Jaw-chrome vanadium applies pressure on all points of any style nut or bolt Cat No. 54362 54363 Description 10” Lock Pliers 10” Lock Pliers with cutter Box Qty 6 6 Each Cable Tie Gun 50230 50250 Economical ‘Pistol’ Style Gives User Improved Comfortable Feel to the Tool Tension Adjustment Allows the User to Adapt the Tool to the Size of the Tie Automatic Cut-Off Eliminates Sharp Edges on Ties Blister Packed Cat No. 50230 Maximum Tie Width .189 Inches Gun Casing Molded Nylon 50240 .370 Inches All Metal 50250 .189 Inches All Metal Each Cable Tie Gun for Stainless Steel Ties Semi-auto module enables tightening & cutting stainless steel ties After the stainless steel tie has been tightened user pushes down the round steel bar at side & can easily cut the tie Works with all tie widths Cat No. 50260 Each 173 TOOLS Aluminum Handle Wire Cutter Maximum Wire Size: 600MCM Copper/Aluminum Aluminum Alloy Handles with Large Rubber Grips for Greater Strength, Comfort and Leverage Shear Type Blades are Made of Forged, Heat Treated Steel and Precision Ground for Clean Cuts Cat No. Length Weight 50040 23.6” 4.6 lbs. Each Steel Handle Wire Cutter Maximum Wire Size: 750MCM Aluminum & 1000MCM Copper Shear Type Blades are Made of Forged, Heat Treated Steel and Precision Ground for Clean Cuts Heavy-Duty Design for Long, Dependable Service Steel Handles with Large Rubber Grips for Greater Strength, Comfort and Leverage Cat No. Length Weight 50050 30” 6.2 lbs. Each Hand Wire Cutter Maximum Wire Size: 2/0 Copper/Aluminum Heat Treated, Precision Ground Shear Action for Clean Cuts Heavy-Duty Forged Steel Cutter High Leverage Handles are Plastic Coated for Extra Comfort and Grip Blister Packed Cat No. 50060 Length 9.8” Each Bolt Cutter Great for cutting bolts, steel rods, locks, etc. Forged Steel Blades Levis Mounted Blades for Greater Strength Steel Handle with Large Rubber Grips for Greater Strength, Comfort, and Leverage Cat No. 50100 174 Size 24” Maximum Cutting Diameter 3/8” Each TOOLS Ratcheting Wire Cutters 50070 For cutting copper & aluminum cable Not for use on ASCR cable or steel wire Compact and Portable Spring Action Mechanism Simple One-Hand Operation Less Handle Forces Required Heat Treated, Precision Ground Shear Action Blades for Clean Cuts Blister Packed Cat No. Maximum Wire Size 50070 50080 Length 400 MCM CU/AL 750 MCM CU/AL Each 9.75” 9.75” 50080 Ratcheting Cable Cutter Long handles give leverage for easier cutting with 2 hands For cutting copper and aluminum cable only Capacity up to AWG 1000MCM Compact & Portable - only weighs 2lbs. Spring action mechanism Heat treated, precision ground shear action blades for clean cuts Cat No. Length Case Qty 50083 17” 5 Each H-Tap Crimp Tool with ‘0’ & ‘D’ Nose Dies U-O Mechanical Crimper for WR Series & H Tap Connectors #2 > < #6 #6 > < #6 U-D 2/0 > < #2 4/0 > < 4/0 Output Force: 4.5 ton Weight: 6.2lbs. Length: 23.6” Die Set For H-Tap Connectors 50086 U-BG Die #6 - #8 can be used for crimping Entrance Splicers Designed for crimping a wide range of overhead service entrance connections, overhead splices, & overhead taps D3 die groove serves as a die seat for W type dies Easy to use MD-6 type ‘POP’ tool Bent fiberglass handle provides a solid grip, good leverage, & better durability than wood Complete crimps are assured with an over-center cam mechanism Tool can easily be checked visually for proper adjustment & can be adjusted with an allen wrench Cat No. Description 50085 H-tap crimp tool with ‘O’ & ‘D’ nose dies 50086 U-BG Die #6 - #8 (not included with tool) Each 175 TOOLS Mechanical Lug Crimpers 50008 50010 50015 For Aluminum & Copper Lugs Buy One Tool - No Dies To Order, No Dies to Lose Cost Less Than Expensive Hydraulic Tools Quality Construction - High Strength Steel Body Adjustable Indentor to Cover a Wide Array of Wire Ranges and Types of Copper and Aluminum Lugs and Splices Nest and Indentor Made of High Strength Steel for Durability Small Head - Convenient in Small Areas All Tools Have Rubber Handle Grips Model #50008 has a Pull-Out Handle Design which Provides Increased Leverage. At 500 MCM, Model #50008 Requires Less Handle Load Than 250MCM Tools Require at 250 MCM Cat No. Wire Range Housing Length Weight 50008 8 - 500 AWG AL 8 - 500 MCM CU Forged 25” 9.0 lbs. 50010 8 - 4/0 AWG AL 8 - 250 MCM CU Cast 22” 6.2 lbs. 50015 8 - 4/0 AWG AL 8 - 250 MCM CU Forged 23.4” 7.7 lbs. 51002 176 50008 Bolt & V Part Replacement 51004 50010 Bolt Part Replacement 51005 50010 V Part & Screw Assembly 51006 50015 Bolt Part Replacement 51007 50015 V Part Replacement & Screw Assembly Each TOOLS Right Angle Tri-Tap Portable GFCI In-Line Tri-Tap Portable GFCI 120V/15A Automatic Reset NEMA 5-15P & (3) 5-15R 2 Ft. 12/3 AWG SJTW Cord 120V/15A Automatic Reset NEMA 5-15P & (3) 5-15R 3 Ft. 12/3 AWG SJTW Cord For indoor or temporary outdoor use Provides portable protection on tools, appliances, outdoor equipment, etc. Great for jobsite, workshop or marina 3 outlet power cord GFCI protection against hazardous shock Cat No. 89000 Case Qty 24 For indoor or temporary outdoor use Provides portable protection on tools, appliances, outdoor equipment, etc. Great for jobsite, workshop or marina 3 outlet power cord GFCI protection against hazardous shock Each Single Portable GFCI Adapter Cat No. 89006 Case Qty 24 Each 4-Outlet GFCI Power Box 120V/15A Automatic Reset 120V/15A 3 Wire Grounding Right Angle GFCI Plug with NEMA 5-15P & 5-15R Power ‘ON’ LED Automatic Reset (4) NEMA 5-15R Outlets with Fits any standard 3 wire outlet Separate Covers for Each Provides instant GFCI protection Outlet Immediately detects ground fault from (1) NEMA 5-15Plug damaged cords or exposure to water and 6 Ft. 12/3 SJTW Cord shuts off power to avoid electrocution 15A Circuit Breaker Use with wet/dry vacs, tools, sump pumps, etc. For indoor or temporary outdoor use Great indoor protection in the garage, Provides portable protection on tools, appliances, outdoor basement and bedroom equipment. Great for jobsite, workshop or marina Cat No. 89002 Case Qty 24 Cat No. 89008 Each Case Qty 24 Each 12” High Tension Hack Saw Saws conduit, wire, PVC pipe, etc Made of cast aluminum with an extra thick tubular steel bar for added strength Lightweight & balanced for greater control Fully adjustable tension holds blade at up to 28,000 psi which prevents twisting & binding of the blade & provides longer blade life & fast accurate cuts Four permanent mounting pins allow both straight cutting & 45 degree angle for flush cutting Includes 12”, 24 teeth per inch blade Cat No. Description Box Qty Each 54628 12” High tension Hacksaw 6 13012 Replacement 12” Hacksaw Blade - 18 Teeth Per Inch 10 13014 Replacement 12” Hacksaw Blade - 24 Teeth Per Inch 10 13016 Replacement 12” Hacksaw Blade - 32 Teeth Per Inch 10 6” Wallboard Saw Beveled point allows users to score & make plunge cuts, eliminating drilling before drywall startup Cuts through gypsum, plastic board & wallboard easily & removes debris Ergonomic style handle with non-slip cushion grip creates a sure & comfortable feel 6” aggressive saw teeth Super-point for easy penetration Cat No. Description Box Qty 54626 6” Wallboard Saw 10 Each 177 TOOLS Auto Load Utility Knife-Quick Change Retractable Blade Includes Plastic Utility Knife Holster Press the button to release used blade Open the cover to feed 10 new blades into cartridge Curved handle design with slip-resistant grip for comfort and ease of use No tools required for quick blade change Plastic holster with belt clip for convenient use Safety overlap handle design for heavy-duty cutting Retractable blade locks in 3 position Includes one heavy-duty blade and stores up to 10 blades in handle Fits most standard utility blades Cat No. 54612 Description Auto-Load Utility Knife with Holster Box Qty 6 Slide the blade-advance button completely backward to refill new blade Each Slide the blade-advance button forward to use normally Auto Utility Knife & Folding Sport Blade Curved handle design with slip-resistant grip for comfort & ease of use 8-Blade Auto-loading feature. Open the cover to feed a new blade into cartridge. Stores up to 8 blades in handle (Blades Included) Safety overlap handle design for heavy-duty cutting Retractable blade locks in 3 positions Fits most standard utility blades Sport Blade locks into position Quick Change Blade Push button up to open utility blade and down to close Press the button to release the sport blade Cat No. Box Qty 54610 12 Each Utility-Knife Blade Dispenser Holds 100 Blades (100 blades included) Heavy-duty razor-edged blades Universal size fits most makes of utility knives Blades are reversible for extra life Dispenser mounts vertically to dispense one blade at a time Measures 2-3/4” W x 1-1/8’ D x 5” H Cat No. 54616 178 Description Utility-Knife blade dispenser with 100 blades Utility-Knife Blades Heavy-duty razor-edged blades Blades fit standard utility knives Blades are reversible for extra life 5 blades per package Each Dispensor Cat No. 54618 Description Utility Knife Blades Each Package TOOLS Folding Lock-Back Utility Knife Belt Clip on Back for Easy Carrying Lightweight aluminum handle Belt Clip on Back for Easy Carrying Quick Change Blade Mechanism One Handed Easy Opening Spring Blade Release Includes 5 Spare Blades Cat No. Box Qty 54606 10 Each Retractable-Blade Utility Knife Retractable blade for safety & convenience Lightweight durable metal housing Retractable blade locks in 3 position Simple blade change Blade included Blister packed Cat No. 54614 Box Qty 12 Each Cable Splicers Knife and Electrician’s Scissors Cuts cable, telephone wire and strips insulation Tough, tempered steel knife blade holds edge longer & remains sharp Full-size no slip easy to grip knife handle provides greater comfort offering better control & less hand fatigue Knife has a short, coping-type blade made of the finest cutlery steel Scissors cut up to 16 guage solid & 12 guage stranded wire Scissors have an upper blade with two stripping notches to strip most insulations from 19-24 AWG Cat No. 54372 54373 Description Scissors and knife kit with two-pocket pouch Cable Splicer’s knife 54374 Electrician’s Scissors Pocket Knife - Coping Blade Box Qty Case Qty 12 72 12 96 12 Big, carbon-steel coping-type blade Woodgrain handle Skins small wire & cable Each 72 12/box Cat No. Blade Steel Blade Length Length Closed 54622 Carbon Steel 3-1/4” 4-1/2” Each Pocket Knife - Sheepfoot Slitting Blade Extra-large curved sheepfoot slitting-blade Ideal for heavy-duty line work Woodgrain handle 12/box Blade locks open Cat No. Blade Steel Blade Length Length Closed 54624 Carbon Steel 3“ 4-1/2” Each 179 TOOLS Trouble Light – Portable Hand Lamps 16/3 SJT Cord 13 Amp-125 Volt Off/On Push-Thru Switch Metal Swing Bulb Guard Metal Socket Orange Color Cat No. 89512 89514 75 Watt bulb Max (not included) Approved under OSHA Standards for general use Heat & shock resistant plastic handles Cord stay flexible at low temperatures Grounded Outlet in Handle Length 25’ 50’ Box Qty 12 6 Each Clamp-On Lamps Off/On Push-thru Switch Metal Socket Max 75 Watt Bulb (not included) 10 Amp-125 Volt 18/2 SPT-2 Cord Spring clamp with Protective Vinyl Sleeve Adjustable Ball Joint For Rotating allows light to be positioned in any direction Vented 8-1/2” Aluminum Finish Reflector 2 Conductor Polarized Plug 6 Foot vinyl black cord with polarized plug Cat No. Length Box Qty 89522 6’ 12 Each Fluorescent Magnet Clamp-On Angle Lamp With magnetic back for additional mounting method Easy bulb replacement Ergonomically designed handle for comfort 13 watt 10,000 hour energy-savings bulb burns as bright as a 60 watt incandescent bulb, cool to touch Extra 120v grounded outlet on body of lamp 25’ 15 amp power cord (16/3), on-off rocker switch Unbreakable housing & lens, oil & water resistant 3600 unbreakable swivel hook Cat No. 89524 Length 25’ Box Qty 8 Each Compact LED Rechargeable Work Light/Flashlight Battery: 3pcs. Ni-H AA battery. 3.6V/1300mAH 110V & 12V Charging Water & oil resistant Size: 7.1” x 2.6” x 1.2” Body Material: ABS Belt Clip for Easy Carrying Ultra Bright 15 LED’s, 100,000 Hour bulb life Handy Belt Clip on the back for carrying on your belt Magnet on back for mounting as work light Running time 4-5 hours from single charge of 1.5-2 hours charging time Switch: On/Off, with a waterproof rubber cover Shockproof design and construction protects from breakage Low heat from the LED bulbs greatly reduces risk of fire or burns Cat No. Each 54668 Mini LED Flashlight Belt Clip for Easy Carrying Special tactical switch: press slightly for momentaryOn/0ff, push for constant-ON/OFF 1 Watt CREE LED Super Bright Beam Approximately 50,000 hours LED life Efficient Collimator Optic System Shock-resistant lens, Water-resistant Aluminum alloy construction Pushbutton On/Off Uses 2 “AA” batteries Cat No. Box Qty 180 54650 10 Each TOOLS Rubberized Flashlight Perfect focused krypton bulb for 70% brighter Beam Push Button Switch Weatherproof Anti-Roll Feature Shockproof & corrosion proof Heavy - Duty Rubber Body Batteries included Cat No. 54652 54654 Size 2-AA Batteries 2-D Batteries Box Qty 24 12 Each LED Flashlight Ultra Bright Luxeon 1 Watt torch - no bulb replacement Focusing system casts long and narrow beam Single Luxeon 1 watt LED can produce 25-30 lumen Luxeon LED enjoy a lifetime of 50,000 hrs. Tough ABS construction with rubber grip Easy carry lanyard included Push button on/off switch Shock and water resistant Powered by 3-D size batteries Over 60 hrs run time Cat No. 54662 Size 3-D Batteries Box Qty 6 Each LED Headlamp Tough bright Luxeon 1 watt LED headlamp Focusing system casts a further and narrower beam Single Luxeon 1 watt LED can produce 25-30 lumen Luxeon LED enjoys a lifetime of 100,000 hrs. No more bulb replacement Adjustable elastic headband Light can be tilted up and down as needed Shock and water resistant Powered by 3-AAA size batteries 5 hrs. strong brightness during 8hrs. running time Cat No. 54666 Size 3-AAA Batteries Box Qty 6 Each Alkaline Batteries AAA AA C Blister Packed D Type 52620 AAA Alkaline 1.5 Volt 4 40 960 52622 AA Alkaline 1.5 Volt 4 40 480 52624 C Alkaline 1.5 Volt 2 20 120 52626 D Alkaline 1.5 Volt 2 20 120 52628 9 Volt 1 10 120 52630 357 Button Style Used In Testers A23 12 Volt Used In Wireless Chime Transmitters & Meters, cameras, etc. 10 —– 500 1 25 200 52632 9V 12V 357 Batteries Per Batteries Batteries Each Blister Card Per Box Per Case Battery Cat No. 181 TOOLS Steel Fish Tape High Impact Storage Case & one piece Nylon Handle for Maximum Durability, Long Life, and Easy, Comfortable Use Highly-Durable Tempered 1/8” Wide Spring Steel Comfortable Slip Resistant Gripping Surface Cat No. 52240 52242 Fiberglass Fish Tape Repair Kit Size 50’ X 1/8” X 1/16” Fishtape 100’ X 1/8” X 1/16” Fishtape Case Qty 6 6 52244 200’ X 1/8” X 1/16” Fishtape 6 52247 6.9” Replacement Leader for steel tape 1 Each High Impact Storage Case & one piece Nylon Handle for Maximum Durability, Long Life, and Easy, Comfortable Use Comfortable Slip Resistant Gripping Surface For use in telecom, electrical, wall & floor conduit, walker duct, and utility installations Fiberglass non-conductive properties for safer pushing/pulling in occupied duct & panel boxes Fiberglass fish tape is the fastest manual fish tape available Repair kit included with each fishtape Due to the non-conductive materials this products is made of, the tip is susceptible to breakage. Tip must be repaired by user. Returns due to tip breakage will not be accepted. Cat No. Size Case Qty 52254 150’ X .15” Rod Fishtape 6 52257 9.8” Replacement Leader for Fiberglass Tape 1 52258 Fiberglass repair kit (glue, 2 eyelets, 1 leader) Each 1 Nylon Fish Tape Non-Conductive Tape Designed for use around Live Circuits Smooth Nylon Jacket provides great handling around bends Strong Core for longer life & greater pushing power Furnished with a malleable tip eyelet Large Handle Grip for Greater User Control Heavy-Duty Winder Case & one piece Nylon Handle for Maximum Durability, Long Life, and Easy, Comfortable Use Stainless Steel Fish Tapes 182 Cat No. 52264 52266 Size 100’ 150’ Case Qty 8 8 52268 Malleable Tips (2) - Each Tempered, High Quality 1/8” (3mm) Wide Stainless Steel Tape Rust & Corrosion Resistant Tape Allows it to Rewind Easier & Last Longer than Ordinary Tape Super Clean Finish Prevents Marks on Walls or Carpet Includes a Formed Hook at End Large Handle Grip for Greater User Control Heavy-Duty Winder Case & one piece Nylon Handle for Maximum Durability, Long Life, and Easy, Comfortable Use Cat No. 52272 52274 Size 50’ 120’ Case Qty 12 8 52276 200’ 5 Each TOOLS Conduit Benders 52322 52324 52326 Lightweight Aluminum for easy handling Cast-in angle indicator on models 52324 & 52326 Markings are raised & cast into the bender body on both sides for visibility Deeply serrated step helps prevent slippage when applying force Grooved internal hook surface helps prevent conduit from slipping Flat hook surface provides stable starting point Order Handle Separately Cat No. Level Included EMT Rigid Inside Radius Fits Handle Case Each 52322 No 1/2” - 5° 52332 20 52324 52326 Yes Yes 3/4” 1” 1/2” 3/4” 6° 8° 52332 52334 15 15 Conduit Bender Handles High quality, pre-threaded bender handles Constructed of high-strength steel for long-term durability Powder painted finish resists corrosion & improves grip Convenient Bending Guide included on handle Cat No. Fits Bender Handle Size Case Qty 52332 52334 52322 & 52324 52326 1” dia x 38” length 1-1/4” dia. X 44” length 12 12 Each PVC Pipe Spring Bender Insert the pipe spring into the pipe and bend across your knee Permanently bend Schedule 40 PVC pipe up to 90° without pipe collapsing Eliminates the need for heat guns or heating blankets Use fewer PVC fittings NOTE: Room temperature should be above 60°F Cat No. 52311 52312 52313 Size 1/2” 3/4” 1” 52314 1-1/4” 52315 1-1/2” 52316 2” 52317 2-1/2” Each PVC Heating Blankets Makes bends, offsets or saddles in PVC fast & easy Easy to use: wrap blanket around PVC, secure with hook & loop strap. Built-in stiffeners keep blanket tight on the PVC surface. Remove blanket and form bend by hand. Good for all schedules Controlled, even heating for uniform bending Temperature over 300° F (149° C) 120VAC Cat No. Capacity Size Wattage 52300 52301 Up to 1-1/2” 2” - 3” 13” x 8-1/4” 30” X 13-1/4” 200 800 Each 183 TOOLS Tape Measures Rubber Jacket protects case from damage & ensures comfortable grip 3” yellow neon yellow case with nonslip impact absorbing comfortable rubber grip Magnetic tipped tape measures have true zero sliding blade tip to ensure accurate inside & outside measurements Easy-to-read measurements on both sides of the blade Durable Steel Belt Clip Front Slide Lock for Easy Operation Bold, Clear Numbers on Bright Yellow Blade Rigid Blade with Protective Acrylic Coating Inch/Foot Blade Graduations Triple-riveted end hook with bottom blade protector that reinforces the blade tip & provides maximum pull-out strength Oversized bold black numbers on the first 11 inches for easy reading Cat No. Size Box Qty Case Qty 52200 52202 52206 52208 25’ X 1” 25’ X 1” with Magnetic tip 33’ X 1-1/4” 33’ X 1-1/4” with Magnetic tip 12 6 12 6 60 60 60 60 Each Automatic Blade Lock Measuring Tape Blade automatically stays out when extended Push button for smooth blade retraction Comfortable, shock resistant rubber grip Double Sided Printing on Blade Cat No. Description Box Qty 52209 52210 25’ x 1” 25’ x 1” with Magnetic Tip 12 6 Each Torpedo Level 9” long & lightweight for use in tight places Three acrylic plastic vials - plumb, level and 45 degrees miter Level vial has side & top reading V grooved edge Strong, high impact ABS body with hang hole Magnetized strip on bottom that holds to iron & steel Cat No. 52212 Overall Length 9” (22.9 cm) Box Qty 10 Each Torpedo Laser Level Horizontal & vertical laser directions at the same time 90o & 180o vials allow accurate leveling Magnetic V groove base locks onto metal studs & pipes 180’ Laser beam length Lightweight & easy to carry Cat No. 54682 184 Length 10.7” Case Qty 40 Each TOOLS Caulking Gun For use with 9” Size Cartridges Use to apply Adhesives, Caulking Compounds & Lubricants Powder Painted to resist Corrosion Hexagon Compression Rod with Ladder Hook Long Trigger gives you leverage Cat No. Each 53266 Heat Gun Specially designed for Heat Shrink Tubing Retractable Fixing Wings to Steady on Table or Ground Thermostat Protection 6 Foot Cord 2 Heat Settings - Hi: 1120°F, Lo: 850°F 125V, 1500W Cat No. Each 54690 Bag of Rags Premium all-purpose wipers New bleached white knit High cotton content Medium weight, random sizes Soft, absorbent, low linting 2 lb. bags Cat No. Each 53264 Plastic Tool Boxes Heavy-duty construction stands up to the rigors of transporting and on-the-job wear and tear Lightweight, plastic-resin construction is weatherproof, won’t rust, dent, or chip and is impact resistant Comfortable, strong carrying handle & lid is padlock ready Removable tray for small tools and parts Flip lids for small part storage Cat No. Size 53412 53416 16” x 10” x 7.2” 22” x 12.3” x 11.8” Each 185 TOOLS Ear Plug 3 soft pliable flange design adjusts to ear for soothing noise suppression Provides superb hearing protection while allowing speech & warning signals to be heard A neck string, plastic case, and chain allow for convenient carrying Compliance: CE EN352-2, ANSI S3.19 SNR: 25dB NRR:25dB Cat No. 53212 Each Foam Ear Plugs Soft polyurethane foam provides comfortable seal against harmful noise Simply roll & insert into the ear, one size fits all Packaged in pairs Cat No. 3 Pair Pack 53214 Ear Muffs Can be used for most industrial noises Large soft foam-filled cushions with deep ear cups, folding headband Provides a good seal for protection against harmful noise Snug and comfortable fit & lightweight It can be folded into a compact unit, good for storage or carry in a pocket Compliance: CE EN352-1, ANSI S3.19 Noise Protection SNR: 30db NRR: 25dB Cat No. 53216 Knee Pads Each Lightweight, soft, comfortable foam padding with abrasion-resistant plastic Tough nylon fabric It provides protection against bump, impact, bruises, and other injuries Good for construction, carpentry, maintenance, electrical work, sports, etc. Good for anything that could cause bruises or abrasions Cat No. 53222 53224 Size Medium Large Each Pair Back Support Help protect workers backs & reduce costly lost time injuries Durable lightweight spandex, powerful knit, and a woven elastic cinch strap fastens securely with hook-and-loop fasteners Bends with body for optimal support of the spine Lightweight breathable back Good for lifting, bending, and carrying Cat No. 53226 53228 Size Large X-Large Each Reflective Vest Nylon mesh with fluorescent blaze & 2” reflective tapes in front & back of vest Provides maximum visibility for safety Lightweight and durable while it retains its color under the toughest weather Adjustable velcro closure in front and elastic straps at both sides Black cloth binding Cat No. 186 53232 Each TOOLS Hard Hats ABS shell, tough, lightweight, and durable Four-point easy turn knob ratchet adjustment for perfect fit Shock-absorbing and rain trough prevents water from dripping down to neck Reinforced ribs on top provide extra impact protection Slotted sides for accessories, such as face shields or ear muffs Complies with ANSI Z89.1 & OSHA requirements Chin strap sold separately from hard hat Cat No. 53240 53242 53244 Description Yellow Hard Hat White Hard Hat Blue Hard Hat 53246 Red Hard Hat 53248 Chin Strap Each Non-Toxic Dust Mask Dependable protection where workers are exposed to nuisance dust & powders Not designed for use as protection against toxic dusts & vapors Disposable, lightweight, odorless, fiberglass free, non-irritating to the skin, and soft flexible nose bridge for a custom seal BFE (Bacteria Filtration Efficiency) up to 99.9% at 3.6 micron particle size Single strap to secure Cat No. 53252 10 Piece Pack Toxic Type Dust/Mist Respirator Protection against particulate aerosols free of oils containing the following materials such as calcium carbonate, china clay, cement, cellulose, sulfur, cotton, flour, carbon, ferrous metals, hard wood, coal, iron ore, aluminum, free silica, bacteria, and mycobacterium tuberculosis (T.B.) Collapse resistant double shell withstands hot and humid conditions Fringe seal latex-free synthetic rubber head strap seals mask to face Contour design ensures compatibility of glasses/goggles and reduces fogging. Soft close-cell nose foam and adjustable nosepiece ensures custom shape and increases the worker comfort and acceptance NIOSH Cat No. 53254 3 Piece Pack First Aid Kit 25 Person Kit Professionally designed with a complete assortment of top quality first aid items Perfect for on-site minor emergencies Handily packages in a sturdy, lightweight plastic case with handle (3) 2X2 Sponge pad (5 PK) (2) 3X3 Gauze pad(2 PK) (3) 3X4 Non-stick pad (1) Combine pad 5X9 (1) First aid dressing(2 PK) (1) Triangular bandage (1) Eye pad (1) Elastic bandage (3" X 5 YDS) (2) Elastic bandage (2" X 5 YDS) (50) Adhesive strips (3/4X2-3/4) (30) Various sizes adhesive strips (8) Alcohol prep pads (4) Cleaning wipes (1) Cold pack (1) Emergency blanket (6) Safety pins (1) Strap tourniquet (1) Tweezers (1) Scissors (1) Glove Cat No. Case Qty Each 53262 20 187 TOOLS High Performance Anti-Slip Gloves Anti-slip functional silicon print on palm and finger Stretchy fabric at back of the hand is form fitting - glove almost feels like part of your hand, gives soft protection & ventilates to keep hand cool High-tech synthetic suede at palm provides durability & abrasion resistance Velcro closure allows easier entry Machine washable Cat No. Size Bag Qty Each With Fingers 53161 Medium 12 53162 Large 12 53163 X-Large 12 53164 2X-Large 12 53171 Medium 12 53172 Large 12 53173 X-Large 12 No Fingers High Performance Shock Absorption Gloves Shock Absorption– rubber sponge underneath the reinforcement patches helps minimize hand fatigue while still maintaining dexterity Dampens & protects users from the collision energy from impact tools Anti-slip functional silicon print on finger tips Stretchy fabric at back of the hand is form fitting - glove almost feels like part of your hand , gives soft protection & ventilates to keep hand cool High-tech synthetic suede, at palm provides durability & abrasion resistance Velcro closure allows easier entry Machine washable - does not stretch, shrink, or harden when washed Cat No. Size Bag Qty 53181 53182 Medium Large 12 12 53183 X-Large 12 53184 2X-Large 12 Each PVC Glove Fully high-grade red PVC coated, interlock lining, and a smooth finish Cotton knit wrist offers comfort and fits the wrist snugly Excellent protection against wide range of chemicals and abrasions resistance such as petroleum, refining, acids, oil, grease, caustics, solvents, cuts, punctures, and abrasion Provides excellent dexterity & grip Great for grimy wet jobs Cat No. 53154 Bag Qty 12 Each PVC Dotted Cotton Glove 188 General use, with rubber dotted on one side for good grip Dense coating offers an abrasion barrier It’s reusable and washable Knit breathable cotton/poly stretches for excellent fit Good for circulation to keep hands dry and comfortable Cat No. 53152 Bag Qty 12 Each TOOLS Brown Jersey Glove Moderate Hand Protection for a Low Cost Cotton 8oz. Deep Brown Jersey Snug Fitting Knit Wrist Large Size Packed with Individual Hanging Cards Cat No. 53110 Bag Qty 12 Each Short Cuff Leather Glove Cow Split Leather Full Leather Index Finger Leather finger Tips and Knuckle Strap Striped Cotton Back with Elastic Wrist for Better Fit Half Lined 2 1/2” Safety Cuff Large Size Packed with Individual Hanging Cards Cat No. 53120 Bag Qty 12 Each Long Cuff Leather Glove Cow Split Leather Full Leather Index Finger Leather finger Tips and Knuckle Strap Striped Cotton Back with Elastic Wrist for Better Fit Half Lined 4 1/2” Rubberized Long Cuff Large Size Packed with Individual Hanging Cards Cat No. 53130 Bag Qty 12 Each Yellow Cow Split Leather Glove Cow Split Leather All Leather Elastic Wrist for Better Fit 53150 has Fleece Lining Large Size Packed with Individual Hanging Cards Cat No. Description Bag Qty Each 53140 Unlined 53150 Fleece Lined 12 12 189 TOOLS Easy Search Tool Bags Easy Search Tool Bags Back side unzips to access plastic tray Rubber bottom for support & water resistance Wide opening convenient for storage & search of tools Super-tough, durable & water-resistant 600-D Polyester Cat No. 53502 53504 Dimensions L W H 12” 9” 10” 16” 10” 11” Pockets Each 37 Total - 12 inside, 25 outside 38 Total - 13 inside, 25 outside Multi-compartment plastic tray slides into bottom of bag Wide opening convenient for storage & search of tools Super-tough, durable & water-resistant 600-D Polyester Cat No. 53512 53514 Large Easy Search Tool Bag L 12” 16” Dimensions W H 9” 10” 10” 11” Pockets Each 23 outside 24 outside Large Easy Search Tool Bag Back side unzips to access plastic tray Rubber bottom for support & water resistance Wide opening convenient for storage & search of tools Shoulder strap for easy carrying 1 drill holster, 1 velcro pocket, 1, zipper pocket Super-tough, durable & water-resistant 600-D Polyester Cat No. 53506 Dimensions L W H 24” 8.5” 13” Pockets Each 63 Total - 24 inside, 39 outside Multi-compartment plastic tray slide into bottom of bag Wide opening convenient for storage & search of tools Shoulder strap for easy carrying 1 drill holster & 2 velcro pockets Super-tough, durable & water-resistant 600-D Polyester Cat No. 53516 Dimensions L W H 24” 8.5” 13” Pockets Each 59 Total - 20 inside, 39 outside Square Tool Carrier Box Shaped Tool Carrier Back side unzips to access plastic tray Box-shaped design prevents tipping Rubber bottom for support & water resistance Extra padded carry handle Super-tough, durable & water-resistant 600-D Polyester Cat No. 190 53522 Dimensions L W H 19” 7” 14” Multi-compartment plastic tray slides into bottom of bag Box-shaped design prevents tipping Extra padded carry handle & adjustable shoulder strap Metal tool snap, and electrical tape strap Super-tough, durable & water-resistant 600-D Polyester Pockets Cat No. 52 Total - 13 inside, 39 outside 53524 Dimensions L W H 9” 9” 15” Pockets 36 Total - 9 inside, 27 outside Each TOOLS Tool Vest Bucket Bag Many different sizes of pockets for various parts & tools Adjustable waist size Super-tough, durable & water-resistant 600 -D Polyester Designed to fit most standard 3-1/2 to 5 gallon buckets Super-tough, durable & water-resistant 600-D Polyester Cat No. 53532 Pockets 36 Total - 12 inside, 24 outside Each Cat No. 53540 Dimensions L H 21.7” 24.4” Pockets Each 9 Cell Phone Holder Tool Belt with Pouches Made of strong elastic fiber material Stretches to adjust to cell phone shape and padded inside to protect cell phone, Good for Blackberrys Heavy duty clip for belt or pants Black Color Cat No. 53552 Versatile - all parts removable and interchangeable Metal tape chain and tool snap Metal clip holds all measuring tape sizes Pocket to hold cordless drill 3” Wide padded belt for comfort Fits waist sizes 29” - 46” Super-tough, durable & water-resistant 600-D Polyester Cat No. Pockets 53536 32 The tool holder you can Hang-Strap-Clip on workbelts, web suspenders, pants etc. Securely holds small tools or accessories like pliers, mini flashlights, screwdrivers, etc. Cat No. Each 53558 Includes 3 convenient sizes and colors: 9x7”(Blue), 7x6”(Hunter Green), & 6x5”(Brown) Carry and organize all your miscellaneous parts, tools and accessories Durable clip hangs on tool belts & loops, etc. 53546 4 Pocket Multi-Purpose Tool Holder Each 3 Multi-Purpose Clip-On Zippered Bags Cat No. Each Set of 3 Bags Electrical Meter/ Tester/ Phone Holder Double layer of rugged lightweight fabric Safety strap with hook and loop fastener Heavy duty metal clip on back Back pocket for tester/meter Front pocket for test leads Cat No. Size 53554 53556 4 1/2”H x 2 1/2”W x 1 1/2”D 6”H x 3”W x 2”D Each 191 TOOLS Sporty Safety Glasses Sporty trend-setting contemporary styling that fits the contours of your face Deep curve provides superior impact protection Lightweight polycarbonate lenses - impact resistance & UV protection Ideal for protection against dust and particles Compliance: ANSI Z87.1 Cat No. 53001 53002 Frame Color Black Black Lens Color Smoke Copper Box Qty 12 12 53003 53004 Black Black Clear Silver Mirror 12 12 53005 53006 Black Silver Blue Mirror Blue Mirror 12 12 Each Safety Goggles General purpose impact resistant cover-type protective goggles Soft clear polycarbonate lens, flexible vinyl shroud Comfortable & Shaped to Conform to Facial Contours Lightweight Elastic Strap, Direct ventilation system Fits over most prescription glasses Meets or Exceeds ANSI Z87.1 Standards Cat No. Description Box Qty 53010 Goggles 12 Each Safety Glasses Fit Over Prescription Glasses Fits Over Prescription Glasses or can be worn alone Full panoramic clear frame/lens has wide vision field & max UV protection Anti-glare brow guard, universal bridge, & spatula temples with wide integral side shields High-Impact, Scratch Resistant Polycarbonate Lens Lightweight Polycarbonate Frame Meets or Exceeds ANSI Z87.1 Standards Cat No. 53000 Description Box Qty Safety Glasses (fit over glasses) 12 Each Standard Safety Glasses Full panoramic clear frame/lens has wide vision field & max UV protection Anti-glare browguard, universal bridge, & spatula temples with wide integral side shields for maximum coverage High-Impact, Scratch Resistant Polycarbonate Lens Lightweight Polycarbonate Frame Adjustable temple that locks into place Meets or Exceeds ANSI Z87.1 Standards 192 Cat No. Description Box Qty 53020 53022 53024 Safety Glasses With Clear Lens Safety Glasses With Shaded Lens Safety Glasses With Mirrored Lens 12 12 12 Each TOOLS Bi-Metal Hole Saws Cat No. Saw Dia. Inches (mm) Pipe Tap Size Pipe Entrance For use with Arbor No’s. 13312 13314 9/16 (14) 5/8 (16) - - 13452-13458 13452-13458 13316 11/16 (17) - - 13452-13458 13318 3/4 (19) 1/2” 3/8” 13452-13458 13320 13/16 (21) - - 13452-13458 13322 7/8 (22) 3/4” 1/2” 13452-13458 13324 15/16 (24) - - 13452-13458 13326 1 (25) - - 13452-13458 13328 1-1/16 (27) - 13452-13458 13330 1-1/8 (29) 1” 3/4” 13452-13458 13332 1-3/16 (30) - - 13452-13458 13334 1-1/4 (32) - - 13460-13470 13336 1-5/16 (33) - - 13460-13470 13338 1-3/8 (35) - 1” 13460-13470 13340 1-7/16 (37) - - 13460-13470 13342 1-1/2 (38) 1-1/4” - 13460-13470 13344 1-9/16 (40) - - 13460-13470 13346 1 5/8 (41) - - 13460-13470 - - 13460-13470 1-1/2” 1-1/4” 13460-13470 13352 1-13/16 (46) - - 13460-13470 13354 1-7/8 (48) - - 13460-13470 13356 2 (51) - 1-1/2” 13460-13470 13358 2-1/16 (52) - - 13460-13470 13360 2-1/8 (54) - - 13460-13470 13362 2-1/4 (57) 2” - 13460-13470 13364 2-5/16 (59) - - 13460-13470 13366 2-3/8 (60) - - 13460-13470 13368 2-1/2 (64) - 2” 13460-13470 13370 2-9/16 (65) - - 13460-13470 13372 2-5/8(67) 2-1/2” - 13460-13470 13374 2-3/4(70) - - 13460-13470 13376 2-7/8(73) - - 13460-13470 13378 3(76) - 2-1/2” 13460-13470 13380 3-1/8 (79) - - 13460-13470 13382 3-1/4 (83) 3” - 13460-13470 13384 3-3/8(86) - - 13460-13470 13386 3-1/2(89) - - 13460-13470 13388 3-5/8(92) - 3” 13460-13470 13390 3-3/4(95) 3-1/2” - 13460-13470 13392 3-7/8(98) - - 13460-13470 13394 4(102) - - 13460-13470 13396 4-1/8(105) - 3-1/2” 13460-13470 13398 4-1/4(108) 4” - 13460-13470 13400 4-3/8(111) - - 13460-13470 13402 4-1/2(114) 4-1/2” 4” 13460-13470 13404 4-3/4(121) - - 13460-13470 13406 5(127) - - 13460-13470 13408 5-1/2(140) - - 13460-13470 Cat No. Description Kits/Case 13410 6(152) - - 13460-13470 13422 12 Piece Hole-Saw Set 5 13348 1-11/16 (43) 13350 1-3/4 (44) Each M42 Bi-Metal For Use in Most Materials: Wood, Plastic, Aluminum, Brass, Cast Iron, & Stainless Steel Variable Pitch Design (4-6 Teeth/Inch) Reduces Labor & Tool Costs By Cutting 45% Faster & Lasting Longer than Straight 6 Pitch Saws Better Chip Clearance, Less Heat Build-Up, Lower Feed Pressure & Smooth Cuts Bi-Metal Hole Saws Combine the Toughness & Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel 1-3/4” Cutting Depth 3/16” Thick Heavy Duty Backing Plate Eliminates the Need for Driving Plates and Prevents Drive Pin Holes from Elongating Packed in Individual Color Boxes 12 Piece Hole Saw Set 12 Piece Set Set Contains Nine High Speed Hole Saws, Two Arbors (13456 & 13466), & a 1/4” Arbor Adapter (13434) Saw Diameters are: 3/4”, 7/8”, 1-1/8”,1-3/8”,1-1/2“, 1-3/4”, 2”, 2-1/4” and 2-1/2” All Components are Packed In a Sturdy Plastic Molded Carrying Case Each 193 TOOLS Hex Extension Shanks 12” Extension Fits 7/16” Hex Arbors Cat No. 13432 Each Replacement 1/4” Arbor Adapter Converts 1/2“-20 Thread Size Arbor to 5/8”-18 Thread Size for use with Larger-Diameter Saws Not Recommended For Saws Larger than 1-1/2” Diameter Cat No. Description 13434 1/4 Arbor Adapter Each Replacement Pilot Drills 1/4” High Sped Pilot Drills for use with all Hole Saw Arbors For General Cutting Of Wood and Metal Blister Packed Cat No. 13442 13444 Length 4-1/8” 3-1/4” For Hole Saw Model 13452, 13456, 13460, 13466 13454, 13458, 13468, 13470 Each Hole Saw Arbors 13456 13454 13452 13458 13460 13468 13470 13466 Rugged, Heat Treated Steel Arbors Complete with 1/4” (6MM) High Speed Pilot Drill Cuts clean circular holes through steel & wood Built to Stand Up Under Hard High Speed Use Blister Packed 194 Cat No. Shank Includes Snap Pins Fits Hole Saw Diameters Replacement Pilot drill 13452 13454 1/4” (6.5mm) Round 3/8” (9.5mm) Hex No No 9/16” - 1-3/16” (14-30) 9/16” - 1-3/16” (14-30) 13442 13444 13456 7/16”(11.0mm) Hex No 9/16” - 1-3/16” (14-30) 13442 13458 13460 SDS Quick Change 7/16” (11.0mm) Hex No No 9/16” - 1-3/16” (14-30) 1-1/4” - 6” (32-152) 13444 13442 13466 7/16“ (11.0mm) Hex Yes 1-1/4” - 6” (32-152) 13442 13468 3/8” (9.5mm) Hex Yes 1-1/4” - 6” (32-152) 13444 13470 SDS Quick Change Yes 1-1/4” - 6” (32-152) 13444 Each TOOLS Carbide Tipped High Speed Steel Hole Saw Cutters For Hard Materials Tungsten carbide tips are strengthened with the latest brazing technology ensuring a longer drilling life - 10x longer than standard hole saws Precision ground teeth cut smooth burr-free holes with ease Split-point pilot drill prevents walking & allows accurate hole placement Easily drills material as hard as stainless steel Cat No. 13472 13474 Size 7/8” 1-1/8” Conduit 1/2” 3/4” 13476 1-3/8” 1” 13478 1-1/2” 13480 1-3/4” 1-1/4” 13482 2” 1-1/2” 13484 2-1/2” 2” CU Pipe 5/8” Each 1-1/2” 2” Recessed Lighting Hole Saws - Carbide Grit The perfect choice for quick and easy installation of recessed lighting Carbide grit cutting edge easily cuts holes in ceramic tile, fiberglass, marble, slate etc. Cuts through stucco, lath, and plaster Cuts 1-3/8” deep - through two sheets of 5/8” drywall in one pass to a depth of two inches Fits most major brands Halo, Capri, Marco, Juno, Prescolite, Progress, Lithonia, Lightolier, and others Strong, durable back plate Arbor not included (accepts Morris Arbor #13466, 13468, or 13470) Cat No. Diameter Use For Each 13492 4-3/8” 13494 6-3/8” Juno, Capri, Marco, Halo Halo, Capri 13496 6-5/8” Juno, Progress 13498 6-7/8” Progress. Capri, Prescolite, LIghtolier, Lithonia, Marco Driller Dust Bowl Driller’s Dust Bowl solves the problem of encapsulating all the debris created by the procmaking a mess while drilling large diameter ess. It works with a wide variety of drill bits, holes in ceiling for the installation of recess other cutting tools, and all sizes of hole saws. light fixture, eliminating the need for face Works with tools you already have mask, goggles, drop cloths or vacuuming. No ceiling marks The tool accessory is easily fitted between a Stops you from punching through once drill’s chuck and the cutting tool. It forms a hole is cut seal to the surface of the material being worked on, and collapses like a plunger to Cat No. Description Case Qty Each allow the user to perform the task while 13500 Driller Dust Bowl 12 Hack Saw Blades Blades Offer a Super-Sharp High Speed Cutting Edge Bi-Metal Blades Combine the Toughness and Shock Resistance of an Alloy with the Cutting Ability of High Speed Steel Outlasts Conventional Blades up to 3 Times Longer High Resistance to Breaking & Requires Fewer Blade Changes Can Be Used In Any Hack Saw Frame Packed in Hanging See-Through Plastic Pouch Cat No. Length Teeth Per Inch Qty Per Pouch 13012 12” 18 10 13014 12” 24 10 13016 12” 32 10 Cuts Material 1/4” & thicker 1/8”-1/4” thick 1/8” thick & less Each Blade 195 TOOLS Reciprocating Saw Blades Bi-Metal Construction for Faster Cutting & Longer Life Blade Wider, Thicker Design for Faster Cuts and Reduced Vibration Packed in Hanging See-Through Plastic Pouch WOOD CUTTING BLADES Cat No. Teeth/Inch L W TH 13112 6 6” 3/4” .05” 13114 6 12” 3/4” .05” Description Pouch Qty Each Blade Very Fast Cutting, Nail Embedded Wood General Rough-In Very Fast Cutting, Nail Embedded Wood General Rough-In 5 5 METAL CUTTING BLADE Cat No. Teeth/Inch 13132 14 L 4” W TH 3/4” .05” 13134 14 6” 3/4” .05” 13136 18 4” 3/4” .05” 13138 18 6” 3/4” .05” 13140 13142 24 24 4” 6” 3/4” .05” 3/4” .05” Description Pouch Qty Each Blade Metal 3/16-1/4“, Conduit, Tubing, 5 Channels, Pipe, Rubber, Fiber Metal 3/16-1/4“, Conduit, Tubing, 5 Channels, Pipe, Rubber, Fiber Metal 1/8-3/16“, Conduit, Tubing, 5 Channels, Pipe Metal 1/8-3/16“, Conduit, Tubing, 5 Channels, Pipe Metal Thinner Than 1/8“, Tubing, Pipe, Trim 5 Metal Thinner Than 1/8“, Tubing, Pipe, Trim 5 SCROLL CUTTING BLADES Cat No. Teeth/Inch 13162 4/6 13164 14 L 6” W TH 3/4” .05” 3-5/8” 5/16” .05” Description Wood Scroll Cutting, Circles, Contours, Nail Embedded Wood Metal Scroll Cutting 3/16” Thru 1/4” Pouch Qty Each Blade 5 5 ALL PURPOSE CUTTING BLADES Cat No Teeth/Inch L W TH Description Pouch Qty Each Blade 13182 10 6” 3/4” .05” All Woods, Nail Embedded Composition Material, 5 Plastic, Ferrous and Non-Ferrous Metals 196 13184 8/12 6” 3/4” .05” All Woods, Nail Embedded Composition Material, Plastic, Ferrous and Non-Ferrous Metals, Cast Iron 5 13186 8/12 8” 3/4” .05” All Woods, Nail Embedded Composition Material, Plastic, Ferrous and Non-Ferrous Metals, Cast Iron 5 13188 8/12 12” 3/4” .05” All Woods, Nail Embedded Composition Material, Plastic, Ferrous and Non-Ferrous Metals, Cast Iron 5 13190 10/12 6” 5/8” .05” All Woods, Nail Embedded Composition Material, Plastic, Light Gauge Ferrous and Non-Ferrous Metals and Aluminum, Has 5/8” Width For Higher Flex 5 13192 10/12 9” 5/8” .05” All Woods, Nail Embedded Composition Material, Plastic, Light Gauge Ferrous and Non-Ferrous Metals and Aluminum, Has 5/8” Width For Higher Flex 5 13194 10/12 12” 5/8” .05” All Woods, Nail Embedded Composition Material, Plastic, Light Gauge Ferrous and Non-Ferrous Metals and Aluminum, Has 5/8” Width For Higher Flex 5 TOOLS Titanium Coated High Speed Steel Drill Bits Titanium Coated Withstands Higher Drilling Temperatures & Increases Life of the Bit 500% Over Uncoated Drill Bits M2 Steel for Superior Metal, Wood & PVC Drilling 135 Degree Split Point for No Slip Starting Self Centering, Reduced Thrust & Easier Penetration Precision Ground Flutes Blister Packed Cat No. Bit Size Flute Length Overall Length 13512 13514 13516 13518 13520 13522 13524 13526 13528 13530 13532 13534 13536 13538 13540 13542 13544 13546 13548 13550 13552 13554 13556 13558 13560 13562 13564 13566 13568 1/16” 5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 11/64” 3/16” 13/64” 7/32” 15/64” 1/4” 17/64” 9/32” 19/64” 5/16” 21/64” 11/32” 23/64” 3/8” 25/64” 13/32” 27/64” 7/16” 29/64” 15/32” 31/64” 1/2” 7/8” 1” 1-1/4” 1-1/2”” 1-5/8” 1-3/4” 2” 2-1/8” 2-5/16” 2-7/16” 2-1/2” 2-5/8” 2-3/4” 2-7/8” 2-15/16” 3-1/16” 3-3/16” 3-5/16” 3-7/16” 3-1/2” 3-5/8” 3-3/4” 3-7/8” 3-15/16” 4-1/16” 4-3/16” 4-5/16” 4-3/8” 4-1/2” 1-7/8” 2” 2-1/4” 2-5/8” 2-3/4” 2-7/8” 3-1/8” 3-1/4” 3-1/2” 3-5/8” 3-3/4” 3-7/8” 4” 4-1/8” 4-1/4” 4-3/8” 4-1/2” 4-5/8” 4-3/4” 4-7/8” 5” 5-1/8” 5-1/4” 5-3/8” 5-1/2” 5-5/8” 5-3/4” 5-7/8” 6” Each 16 Piece Titanium Coated Drill Bit Set 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 5/16”, 3/8” 16 Piece Drill Set in Plastic Case Titanium Coated Withstands Higher Drilling Temperatures & Increases the Life of the Bit 500% Over Uncoated Drill Bits M2 Steel for Superior Metal, Wood & PVC Drilling 135 Degree Split Point for No Slip Starting Precision Ground Flutes Blister Packed Cat No. 13592 Description 16 Piece Drill Bit Set Each 197 TOOLS Nail Hawg Auger Bits Eats thru nails NEW DESIGN LASTS 8X LONGER Precision design prevents point breakage Primarily Used For Drilling Wood Where Small Nails and Other Materials May be Encountered 7/16” Shank Hollow Center Twist Designed for Fast, Continuous Flow of Chips Self-Feeding Screw Point Draws Bit Heat Treated for Long Life Packed in Hanging Hard Plastic Tube Cat No. Bore Diameter Length 13660 13662 13664 13666 13668 13670 13680 13682 13684 13686 13688 13690 13692 13694 13696 13698 5/8” 11/16” 3/4” 13/16” 7/8” 1” 1/2” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1” 1-1/8” 1-1/4” 7-3/4” 7-3/4” 7-3/4” 7-3/4” 7-3/4” 7-3/4” 18” 18” 18” 18” 18” 18” 18” 18” 18” 18” Each Auger Bit Extensions 12” Extension Fits 7/16” Hex Shank Add 12” to your bit Heavy-duty set screw type Has 2 Set Screws Hex Wrench included Cat No. 13798 Each Flat Spade Bits Fast Cut Bevel Edge Large Size Markings make Bit easily identifiable Bore Hardwood, Softwood, Plywood & Drywall Forged & Heat Treated for Long Life Hole in Top Center for Wire Pulling Heat Treated for Long Life Packed in Hanging See-Through Plastic Pouch Quick change feature Cat No. 13812 13814 Hole Diameter 1/4” 3/8” Length 6” 6” 13816 13818 13820 13822 13824 13826 13828 13830 1/2” 5/8” 3/4” 7/8” 1” 1-1/8” 1-1/4” 1-3/8” 6” 6” 6” 6” 6” 6” 6” 6” 13832 13842 13844 13846 13848 13850 13852 1-1/2” 3/8” 1/2” 5/8” 3/4” 7/8” 1” 6” 16” 16” 16” 16” 16” 16” Each 6 PIECE SET – 6” Long 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1” 13862 6 Piece Set 198 TOOLS Carbide-Tip Masonry Bits Slow spiral Alloy Steel Shank for Strength and Durability Shallow Precision Machined Wide Oval Flutes Lift & Prevents Dust Packing Carbide Tip Resists Dulling Drills Masonry, Brick, Stone, Plaster, Slate, etc. Produces Clean, Accurately Sized Holes Fast Packed in Hanging Hard Plastic Tube Cat No. 13612 13614 13616 13618 13620 13622 13624 13626 13628 13630 13632 13634 13636 13638 13640 13642 13644 13646 13648 13650 13652 13654 13656 Diameter Shank Diameter 1/8” 1/8” 5/32” 5/32” 11/64” 11/64” 3/16” 3/16” 7/32” 3/16” 1/4” 1/4” 1/4” 1/4” 1/4” 1/4” 9/32” 1/4” 5/16” 5/16” 3/8” 3/8” 7/16” 3/8” 1/2” 3/8” 1/2” 3/8” 9/16” 1/2” 5/8” 1/2” 11/16” 1/2” 3/4” 1/2” 7/8” 1/2” 1” 1/2” 1-1/8” 1/2” 1-1/4” 1/2” 1-1/2” 1/2” Length 3” 3” 3” 3” 3” 4” 6” 12” 4” 4” 4” 6” 6” 18” 6” 6” 6” 6” 6” 12” 12” 12” 12” Each Selfeed Bits Cuts Faster & Has Improved Balance with Reduced Runout Shanks Have Flat Surfaces for Secure Chuck Grip Feed Screws Removable & Replaceable Feed Screw Provides Fast, Effortless Feeding Even in Gummy Wood Double Sided Feed Screw & Allen Wrench furnished With Each Bit - After Bit is Worn, You Can Reverse the Bit to the Other Side Inside Cutting Plane Shaves Hole Radius for Clean, Smooth Holes without Pressure Spurs on Outside Diameter Cut Holes Clearly & Accurately Universal 7/16” shank Cat No. Size 13881 13882 13883 13884 13885 13886 13887 13888 13889 13890 13891 13898 13899 1” 1-1/8” 1-1/4” 1-3/8” 1-1/2” 1-5/8” 1-3/4” 2” 2-1/8” 2-1/4” 2-9/16” 3mm Allen Wrench Screw Point Replacement Each 199 TOOLS 1/4” Magnetic Bit Holder/Extension Screwdriver Guide 2-3/8” long (extends to 4-3/4”) Holds 1/4” hex insert bits & accepts #10 & smaller screws Heat treated hardened steel bit Oversized magnet holds screw in correct starting position Outer sleeve slides over screwhead & helps to keep bit in the screwhead recess Extends power tool reach by reaching limited access areas Cat No. 13900 Each Hex Shank Insert Bits 1/4” Hex Drive Insert & Power Bits Made of S2 Steel for Strength & Long Life Packed in Hanging Hard Plastic Box Cat No. Overall Length Point Size Bits/Pkg 13912 1” #1 10 13914 1” #2 10 13916 1” #3 10 13920 2” #2 5 Each Bit Saw Drill Bit Drills Holes & Saws in one operation - used to enlarge holes Multi Function Bit Drills - Saws and Reams Brass, Aluminum, Wood, and Plastics Cross Milled Cutting Edges for Rapid, Non Clog Cutting Fits any Electric Drill or Drill Press Cuts Own Starting Hole and Any Shape In Any Direction Tool is Moved Fully Ground Titanium for Long Life Packed in Hanging Hard Plastic Tube Cat No. Size 13032 1/8” 13034 5/32” 13036 3/16” 13038 3/32” 13040 1/4” 13042 5/16” Each Step Drill Bits One bit allows you the flexibility to drill various hole diameters Self-starting point eliminates starter holes or punches Double-fluted design for balanced cuts, faster penetration, & cooler operation Use for metal studs, switchboxes, lighting fixtures, junction boxes, etc. All bits marked with sizes Automatically deburs drilled hole Heat treated & tempered for maximum strength & life 200 Cat No. Drill Diameter Sizes (inches) Chuck Size 13980 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2 1/4” 13982 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 1/4” 13984 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 3/8” 13986 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 3/8” 13988 1/4, 25/64, 35/64, 11/16, 7/8, 1, 1-1/8, 1-7/32, 1-1/4, 1-3/8 3/8” Each Bit TOOLS 100 Piece Security Bit Set PH0, PH1, PH2 x 5pcs, PH3 SL 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8mm PZ0, PZ1, PZ2 x 5pcs, PZ3 Spanner 4, 6, 8, 10 Tri-wing 1, 2, 3, 4 4 Square 0, S1, S2, S3 M 5, 6, 8 Torq-set 6, 8, 10 Clutch 1, 2, 3 2.4” L magnetic bit holder 1” L Adaptor 2” L Adaptor 1” L Y-Bit 1”mm L Bit Holding Socket T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-35 T-40 (Tamper Proof) T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45 Hex. 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8mm Hex. 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32",3/16",7/32” 1/4" Hex. 2, 2.5, 3, 4, 5, 6mm (Tamper Proof) Hex. 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (Tamper Proof) One of the most complete tamperproof screwdriver kits available anywhere with all of the most common & many of the rarest bits Includes magnetic holder & adaptors for power driving Cat No. Each 13950 Super Yellow Anchor Kits Anchor Kits Include 100 Screws, 100 Anchors, 1 Drill Bit and a 2-Compartment High Impact Reusable Plastic Box with Hanger YELLOW SUPER ANCHOR Larger & Better Holding than Conical Anchor PAN HEAD/COMBO SCREW DRILL BIT HEX HEAD/COMBO SCREW Cat No. Screw Size Screw Type Anchor Kits Per Case 31020 10 X 1 Pan Head, Combo Slotted/Phillips Super Yellow 48 31024 10 X 1 Hex Head, Combo Slotted Super Yellow 48 31030 10 X 1-1/4 Pan Head, Combo Slotted/Phillips Super Yellow 48 31034 10 X 1-1/4 Hex Head, Combo Slotted Super Yellow 48 Each Kit Plastic Trays Replacement trays for Morris Workbags located on page 190 Can also be used without tool bag Good for organizing small parts & fasteners Cat No. Size Used in Tool Bag # 53452 53454 5.9" x 7.2" x 1.8" 7" x 10.6" x 1.5" 53524 Square Tool Carrier 53512 & 53516 Tool Bags 53456 14.1" x 9.1" x 1.9" 53514 Tool Bag Each 201 TOOLS Green Grounding Screws For grounding of switch & outlet boxes Hex washer head slotted/phillips With Easy-Start Tip Cat No. Size 30772 10/32 X 3/8 100 Cat No. Box Qty 30773 100 Box Qty 100 100 100 100 100 100 100 100 100 Per 100 Box Qty 100 100 30024 8 X 3/4” 100 30026 8 X 1” 100 30028 8 X 1-1/4” 100 30030 8 X 1-1/2” 100 30032 8 X 2” 100 30042 10 X 3/4” 100 30044 10 X 1” 100 30046 10 X 1-1/4” 100 30048 10 X 1-1/2” 100 30050 10 X 2” 100 30052 12 X 1” 100 30056 12 X 1-1/2” 100 30058 202 12 X 2” 100 Head Box Size Qty 1/4” 100 1/4” 100 Cat No. 30212 30222 Size 6 X1/2” 8 X 1/2” 30224 8 X 3/4” 1/4” 100 30226 8 X 1” 1/4” 100 30228 8 X 1-1/4” 1/4” 100 30230 8 X 1-1/2” 1/4” 100 30232 8 X 2” 1/4” 100 30242 10 X 3/4” 5/16” 100 30244 10 X 1” 5/16” 100 30246 10 X 1-1/4” 5/16” 100 30248 10 X 1-1/2” 5/16” 100 30250 10 X 2” 5/16” 100 Cat No. Box Qty 30774 100 Slotted Zinc Plated Per 100 Cat No. Size Box Qty Per 100 30312 6-32 X 1/2” 100 30314 6-32 X 3/4” 100 30316 6-32 X 1” 100 30318 6-32 X 1-1/4” 100 30320 6-32 X 1-1/2” 100 30322 6-32 X 2” 100 30324 6-32 X 2-1/2” 100 30326 6-32 X 3” 100 Round Head Machine Screws Drywall Screws Slotted Zinc Plated Per 100 Cat No. 30502 30504 30506 30508 30510 30511 30513 30536 30518 30520 30532 30534 Size Box Qty 6 X1” 100 6 X 1-1/4” 100 6 X 1-5/8” 100 6 X 2” 100 6 X 2-1/4” 100 8 X 2-1/2” 100 8 X 3” 100 8 X 4” 100 BULK PACK 6 X 2” 500 6 X 2-1/4” 400 8 X 2-1/2” 300 8 X 3” 200 Per 100 Flat Head Machine Screws Bugle Head Phillips Black Phosphated Fine Thread Pan Head Combo Slotted/Phillips Zinc Plated Size 6 X1/2” 8 X 1/2” Per 100 Hex Washer Head Slotted Zinc Plated Sheet Metal Screws Cat No. 30012 30022 6” Overall Sheet Metal Screws Hex Washer Head Zinc Plated Head Size Size 6-20 X 1/2” 1/4” 8-18 X 1/2” 1/4” 8-18 X 3/4” 1/4” 8-18 X 1” 1/4” 8-18 X 1-1/4” 1/4” 8-18 X 1-1/2” 1/4” 10-16 X 1” 5/16” 10-16 X 1-1/4” 5/16” 10-16 X 1-1/2” 5/16” 3/8 Grounding Screw With Easy-Start Tip Length aluminum grounding wire Self Drilling Screws Cat No. 30112 30122 30124 30126 30128 30130 30144 30146 30148 Solid Green 12 GA Wire Attached 10/32 x Used with #10, #12, or #14 copper or Box Qty Per 100 Green Grounding Pigtails Green Grounding Clips Per 100 Cat No. 30408 30412 Size 6-32 X 1” 8-32 X 1/2” Box Qty Per 100 100 100 30414 8-32 X 3/4” 100 30416 8-32 X 1” 100 30420 8-32 X 1-1/2” 100 30422 8-32 X 2 100 30424 8-32 X 2-1/2” 100 30426 8-32 X 3” 100 30438 10-24 X 1-1/4” 100 30452 10-32 X 3/4” 100 30454 10-32 X 1” 100 30456 10-32 X 2” 100 30462 1/4-20 X 3/4” 100 30464 1/4-20 X 1” 100 30466 1/4-20 X 1-1/2” 100 30468 1/4-20 X 2” 100 30472 1/4-20 X 3” 100 TOOLS Cat No. 30612 30614 30616 30617 30618 30619 Size 6-32 8-32 10-24 1/4-20 5/16-18 3/8-16 Hex Nuts Flat Washers Fender Washers Zinc Plated Zinc Plated Zinc Plated Box Qty 100 100 100 100 100 100 Per100 Cat No. 30622 30624 30625 30626 30628 30629 Lock Washers Size #6 #8 #10 1/4” 3/8” 1/2” Box Qty 100 100 100 100 100 50 Per100 Cat No. Size Box Qty 30632 1/4 X 1” 100 30634 1/4 X 1-1/4” 100 30638 1/4 X 1-1/2” 100 30644 3/8 X 1-1/4” 100 30646 3/8 X 1-1/2” 100 Per100 6-32 Painted Plate Screws Plastic Anchors Zinc Plated Cat No. 30656 30658 30660 Size 1/4” 5/16” 3/8” Box Qty 100 100 100 Per100 Cat No. Size Box Qty Per100 30700 #10 Super Yellow 100 30702 #8 Conical 100 30704 #10 Conical 100 Lag Screws Hex Head Zinc Plated Cat No. Size Box Qty 30922 1/4 X 1-1/2” 100 30924 1/4 X 2” 100 30928 1/4 X 3” 100 30934 5/16 X 2” 100 30948 3/8 X 2” 100 30952 3/8 X 3” 50 Per 100 SelfDrilling Anchors Great for 3/8”, 1/2” & 5/8” drywall Combo drive #6~8 phillips & #3 square drive Replaces molly & toggle systems Cat No. Type Box Qty 30706 30708 Nylon Zinc 100 100 Per 100 Cat No. 30962 30963 30964 30965 30980 30981 30982 Cat No. Size Color Box Qty 30710 30720 30730 30740 30750 1/2” 1/2” 1” 1” 1” Ivory White Ivory White Nickel 100 100 100 100 100 Per 100 Hex Bolts Toggle Bolts Grade 2 Low Carbon Zinc Plated Round Slotted Spring-Wing Type Zinc Plated Size Box Qty Per 100 1/4-20 X 1/2” 100 1/4-20 X 3/4” 100 1/4-20 X 1” 100 1/4-20 X 1-1/4” 100 3/8-16 X 1” 100 3/8-16 X 1-1/4” 100 3/8-16 X 1-1/2” 100 Cat No. Length Box Qty 30832 30838 30840 30846 30848 1/8 X 3” (6-32) 3/16 X 3” (10-24) 3/16 X 4” (10-24) 1/4 X 3” 1/4 X 4” 50 50 50 50 50 Couplings Per 100 Wire Rope Clips Zinc Plated Galvanized Mallable Iron For Guy Wire Cat Box No. Diameter Length Qty 30882 1/4-20 7/8” 100 30886 3/8-16 1-3/4” 50 30888 1/2-13 1-3/4” 50 Per 100 Cat No. 17302 Size 1/4” Box Qty 50 Each 203 TOOLS Drive Pins With Washer Drive Pins For fastening into concrete, steel, or masonry with power actuated tools .300 dia. Head with plastic ferrule as guide .143 dia. shank drive pins Cat No. 31111 31112 Shank Length 1/2” Knurled 5/8” Knurled Box Qty 100 100 Case Qty 5000 5000 31114 3/4” 100 5000 31116 1” 100 5000 31118 31120 1 1/4” 1 1/2” 100 100 1000 1000 31122 2” 100 1000 Per 100 For fastening into concrete, steel, or masonry with power actuated tools .300 dia. Head with plastic ferrule as guide .143 dia. shank drive pins, 1” dia. Metal washer Cat No. Shank Box Qty Case Qty 31132 3/4” 100 1000 31134 1” 100 1000 31136 1 1/4” 100 1000 31138 1 1/2” 100 1000 31140 2” 100 1000 2 1/2” 100 1000 3” 100 1000 31124 2 1/2” 100 1000 31142 31126 3” 100 1000 31144 Power Loads Per 100 Power Loads– 10 Shot Strip 1000pcs/case 1000pcs/case .27 caliber power charge Used for most low velocity strip shot tools .22 caliber low velocity power charge Used for most low velocity single shot tools Cat No. Color Power Cat No. Color Power 31162 Gray Lowest Power Level Box Qty Per 100 1 100 31172 White Lowest 2 100 31164 Brown Low 2 100 31174 Green Low 3 100 31166 Green Medium 3 100 31176 Yellow Medium 4 100 31168 Yellow Strong 4 100 31178 Red Strong 5 100 Power Level Box Qty Per 100 Drive Pins with Angle Clip For fastening angle clip into concrete, steel, or masonry with power actuated tools .300 diameter Head with plastic ferrule as guide, .143 diameter shank drive pins Malleable Hook Cat No. Shank Length Hole Dia. Box Qty Case Qty 31152 31154 1” 1 1/4” .278” .278” 100 100 1000 1000 Swivel Pendant Swivel pendant mount allows highbays and other hanging fixtures to be mounted on a sloped ceiling Fits 3/4” conduit Includes reducer bushing to 1/2” with set screw Fits standard and round electrical boxes 3/4” NPT threads Use with high bay and other fixtures Includes screw 204 Cat No. 18092 Box Qty 100 Each Per 100 Cat No. 18094 Box Qty 25 Each WEATHERPROOF BOXES Lampholder Gasket & Mounting Screws Supplied Seamless Die Cast Aluminum Powder Coat Finish Individually Bagged & Bar Coded For 75 Thru 150 Watt PAR 38 Lamps Extra Long Wire Leads for Easy Hook-Up Locking Swivel Knuckle Assures Positive Lamp Positioning and Provides Pinpoint Directional Aiming Each Lampholder Supplied With a Copper Screw Shell Porcelain Socket (37408 Aluminum Shell), Inside Gasket & 1/2” Locknut Press Fit Internal Heat Resistant Gasket Designed Not to Come Out When Bulb is Changed Cat No. Finish Box Qty 37408 37410 37412 37414 Unpainted Gray White Bronze 100 100 100 100 Each Hole Plugs and Accessories FIG 1 FIG 3 FIG 2 FIG 4 FIG 8 Decorative FIG 6 FIG 5 Cat No. Finish Bag Qty Box Qty Fig. Description 37510 37512 37514 37520 37522 37524 37530 37540 1 1 1 1 1 1 1 2 1/2” Hole plug 1/2” Hole Plug 1/2” Hole Plug 3/4” Hole Plug 3/4” Hole Plug 3/4” Hole Plug 1” Hole Plug 1-2 Adapter Gray White Bronze Gray White Bronze Gray Gray 10 10 10 10 10 10 10 10 30 30 30 30 30 30 30 30 37910 37920 3 4 Mounting Lug Lampholder Inside Gasket Gray —– 10 10 30 30 37930 5 1 Gang Single Receptacle Gasket —– 10 30 37932 6 1 Gang Duplex Receptacle/GFCI Gasket —– 10 30 37934 7 2 Gang Gasket —– 10 30 37936 8 4” Round Gasket —– 10 30 FIG 7 Each 205 WEATHERPROOF BOXES Weatherproof Boxes Seamless Die Cast Aluminum Powder Coat Finish Individually Bagged Bar Coded Includes Closure Plugs Detachable Lugs Provided (Except Where Noted) Ground Screw Installed Reinforced Connector Outlets One Gang – 18 Cubic Inch Capacity Length 4 1/2” X Width 2 3/4” X Depth 2” FIG 1 FIG 2 FIG 3 Lugs No. of Outlet Holes Outlet Hole Dia. No. of Closure Plugs 1 No Lugs 3 1/2” 1 No Lugs 3 1/2” 36004 1 No Lugs 3 36010 1 Lugs 36012 1 Lugs 36014 1 36018 1 36020 1 36022 1 36024 Cat No. Fig. Finish Box Qty 36000 36002 2 Gray 80 2 White 80 1/2” 2 Bronze 80 3 1/2” 2 Gray 80 3 1/2” 2 White 80 Lugs 3 1/2” 2 Bronze 80 No Lugs 3 3/4” 2 Gray 80 Lugs 3 3/4” 2 Gray 80 Lugs 3 3/4” 2 White 80 1 Lugs 3 3/4” 2 Bronze 80 36028 2 No Lugs 4 1/2” 2 Gray 80 36030 2 Lugs 4 1/2” 2 Gray 80 36032 2 Lugs 4 1/2” 2 White 80 36034 2 Lugs 4 1/2” 2 Bronze 80 36040 2 Lugs 4 3/4” 2 Gray 80 36050 3 Lugs 5 1/2” 2 Gray 80 36060 3 Lugs 5 3/4” 2 Gray 80 36070 4 Lugs 5 1/2” 2 Gray 80 36080 4 Lugs 5 3/4” 2 Gray 80 Each FIG 4 One Gang Deep – 24 Cubic Inch Capacity Length 4 1/2” X Width 2 3/4” X Depth 2 5/8” FIG 5 FIG 6 206 Lugs No. of Outlet Holes Outlet Hole Dia. No. of Closure Plugs Finish Box Qty 5 Lugs 3 1/2” 2 Gray 10 36100 5 Lugs 3 3/4” 2 Gray 10 36110 5 Lugs 3 1” 2 Gray 10 36120 6 Lugs 5 1/2” 2 Gray 10 36130 6 Lugs 5 3/4” 2 Gray 10 36140 6 Lugs 5 1” 2 Gray 10 Cat. No. Fig. 36090 Each WEATHERPROOF BOXES Weatherproof Boxes Seamless Die Cast Aluminum Powder Coat Finish Individually Bagged Bar Coded Includes Closure Plugs Detachable Lugs Provided Ground Screw Installed Reinforced Connector Outlets Two Gang – 30.5 Cubic Inch Capacity Length 4 1/2” X Width 4 1/2” X Depth 2” FIG 1 FIG 3 FIG 5 FIG 7 FIG 2 FIG 4 FIG 6 FIG 8 Fig. No. of Outlet Holes Outlet Hole Dia. No. of Closure Plugs 36210 1 3 1/2” 36212 1 3 1/2” 36214 1 3 36220 1 3 36222 1 36224 1 36230 36240 Cat. No. Finish Box Qty 2 Gray 30 2 White 30 1/2” 2 Bronze 30 3/4” 2 Gray 30 3 3/4” 2 White 30 3 3/4” 2 Bronze 30 2 4 1/2” 2 Gray 30 2 4 3/4” 2 Gray 30 36250 3 5 1/2” 2 Gray 30 36260 3 5 3/4” 2 Gray 30 36270 4 5 1/2” 2 Gray 30 36280 4 5 3/4” 2 Gray 30 36290 5 6 1/2” 2 Gray 30 36300 5 6 3/4” 2 Gray 30 36310 6 7 1/2” 2 Gray 30 36320 6 7 3/4” 2 Gray 30 36330 7 7 1/2” 2 Gray 30 36340 7 7 3/4” 2 Gray 30 36350 8 9 1/2” 2 Gray 30 36360 8 9 3/4” 2 Gray 30 Each Two Gang Deep – 37 Cubic Inch Capacity Length 4 1/2” X Width 4 1/2” X Depth 2 5/8” FIG 9 Fig. No. of outlet Holes Outlet Hole Dia. No. of Clossure Plugs Finish Box Qty 36370 9 5 1/2” 2 Gray 5 36380 9 5 3/4” 2 Gray 5 36390 9 5 1” 2 Gray 5 36400 10 7 1/2” 2 Gray 5 36410 10 7 3/4” 2 Gray 5 36420 10 7 1” 2 Gray 5 Cat. No. Each FIG 10 207 WEATHERPROOF BOXES One Gang Weatherproof Covers Powder Coat Finish Self Closing Lids Individually Bagged & Bar Coded Lampholder Covers Include Closure Plugs Gasket & Mounting Screws Supplied Seamless Die Cast Aluminum Horizontal One Gang Covers FIG 1 FIG 2 Cat. No. 37010 Fig. 1 Description Duplex Receptacle Finish Gray Box Qty 100 37012 1 37014 1 Duplex Receptacle White 100 Duplex Receptacle Bronze 100 37020 2 37022 2 GFCI/Decorator Gray 50 GFCI/Decorator White 50 37024 2 GFCI/Decorator Bronze 50 Each Vertical One Gang Covers FIG 4 FIG 3 FIG 5 FIG 6 FIG 8 FIG 7 Cat No. 37110 Fig. 3 Description Single Receptacle Finish Gray Box Qty 100 37112 3 Single Receptacle White 100 37114 3 Single Receptacle Bronze 100 37120 4 Duplex Receptacle Gray 100 37122 4 Duplex Receptacle White 100 37124 4 Duplex Receptacle Bronze 100 37130 5 GFCI/Decorator Gray 50 37132 5 GFCI/Decorator White 50 37134 5 GFCI/Decorator Bronze 50 37140 6 Gray 50 37150 6 Gray 50 37160 6 Gray 50 37170 7 Gray 50 37180 8 Single Receptacle 1.438” Opening 20A & 30A Twist Lock Receptacles 1.625” Opening 30A 3 & 4 Wire Twist Lock Receptacles 1.75” Opening 30A Dryer & 50A Range Receptacle 2.125” Opening Blank Gray 100 37182 8 Blank White 100 37184 8 Blank Bronze 100 Each Rectangular Lampholder Covers FIG 9 208 FIG 10 Cat. No. Fig. Description No. of Closure Plugs Finish Box Qty 37310 9 1 – 1/2” Hole 37312 9 1 – 1/2” Hole - Gray 160 - White 37314 9 160 1 – 1/2” Hole - Bronze 37330 160 10 3 – 1/2” Hole 1 Gray 160 37332 10 3 – 1/2” Hole 1 White 160 37334 10 3 – 1/2” Hole 1 Bronze 160 Each WEATHERPROOF BOXES Two Gang Weatherproof Covers Powder Coat Finish Self Closing Lids Individually Bagged & Bar Coded Gasket & Mounting Screws Supplied Seamless Die Cast Aluminum Cat No. Fig. FIG 2 FIG 1 FIG 3 FIG 6 FIG 5 FIG 4 Description Finish Box Qty Each 37210 1 2 Duplex Receptacles Gray 100 37212 1 2 Duplex Receptacles White 100 37214 1 2 Duplex Receptacles Bronze 100 37220 2 Gray 100 37222 2 White 100 37224 2 Bronze 100 37226 3 1 GFCI & 1 Duplex Receptacle 1 GFCI & 1 Duplex Receptacle 1 GFCI & 1 Duplex Receptacle 2 Single Receptacles Gray 100 37230 4 Gray 100 37240 5 Gray 100 37250 37260 6 7 1 Single Receptacle & 1 Duplex Receptacle 1 GFCI & 1 Single Receptacle 2 GFCI Receptacles Blank Cover Gray Gray 100 100 37262 7 Blank Cover White 100 37264 7 Blank Cover Bronze 100 FIG 7 Weatherproof Box Extensions & Adapter Rings Powder Coat Finish Individually Bagged Bar Coded Includes Closure Plugs Gasket & Mounting Screws Supplied Seamless Die Cast Aluminum Fits All Universal Type Weatherproof Boxes Cat No. Fig. No. of Outlet Holes Outlet Hole Dia. No. of Closure Plugs Finish Box Qty Each One Gang Extension Ring 9.3 Cubic Inch Capacity Length 4-1/2” X Width 2-3/4” X Depth 1” FIG 8 FIG 10 FIG 9 FIG 11 36510 8 36512 9 36520 36530 36540 36550 10 10 11 11 - Gray Two Gang Extension Ring 16.3 Cubic Inch Capacity Length 4-1/2” X Width 4-1/2” X Depth 1” 24 Gray 24 One Gang Flanged Box Extension Adapter 10.0 Cubic Inch Capacity Length 5-1/4” X Width 3-1/2” X Depth 1-1/2” 4 4 6 6 1/2” 3/4” 1/2” 3/4” 2 2 2 2 Gray Gray Gray Gray 50 50 50 50 209 WEATHERPROOF BOXES 4” Round Weatherproof Boxes & Extensions Powder Coat Finish Individually Bagged Bar Coded Includes Closure Plugs Ground Screw Installed in Boxes Seamless Die Cast Aluminum 15.3 Cubic Inch Capacity – 1 1/2” Deep No. of Outlet Outlet Hole Fig. Holes Dia. Cat. No. No. of Closure Plugs Finish Box Qty Each 4” ROUND WEATHERPROOF BOXES 36610 1 5 1/2” 4 Gray 40 36612 1 5 1/2” 4 White 40 36614 1 5 1/2” 4 Bronze 40 1 5 3/4” 4 Gray 40 36620 4” ROUND WEATHERPROOF BOX EXTENSIONS FIG 1 FIG 2 36710 2 4 1/2” 3 Gray 40 36720 2 4 3/4” 3 Gray 40 4” Round Weatherproof Covers Includes Closure Plugs Gasket & Mounting Screws Supplied Seamless Die Cast Aluminum Powder Coat Finish Individually Bagged Bar Coded FIG 1 FIG 3 FIG 2 Cat. No. Fig. 36810 36812 36814 36830 36832 36834 36840 36842 36844 36850 1 1 1 2 2 2 3 3 3 4 No. of Outlet Holes 1 1 1 3 3 3 3 3 3 Outlet Hole Dia. 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” Blank No. of Closure Plugs 1 1 1 1 1 1 Finish Box Qty Gray White Bronze Gray White Bronze Gray White Bronze Gray 50 50 50 50 50 50 50 50 50 50 Each FIG 4 In-Use Weatherproof Covers Meets 2002 NEC 406.9(B) Code Weatherproof While in Use Quick Fit Install in Seconds Maximum Impact Resistance Movable Hinges for Easy Vertical or Horizontal Mounting (2 gang only) Maximum Versatility, Easily Configured 2-3/4” Depth Single gang supports 7 switch & receptacle styles Double gang supports 6 switch & receptacle styles 210 One Gang Two Gang Cat No. Description Case Qty 38900 1 gang 40 38910 2 gang 30 Each LIGHTING Emergency Lighting Units 4 Decorative & Economical Units with Modern Appearance & Low Maintenance Completely Self-Contained Fully Automatic Operation Compact, Low Profile Designs in Neutral Finish Push to Test Switch 6-Volt, Pure Lead, Maintenance Free Battery Environmental Coated, Solid State Charger 2 x 5.4 Watt Incandescent Lamps Automatic, Low Voltage Disconnect (LVD) Universal Transformer for 120 or 277 VAC Replacement bulb GE 939 or equal Universal Mounting Plate Injection Molded, V-O Flame Retardant, High Impact, Thermoplastic Housing Charge Rate/Power on LED Indicator Light 90 Minute Emergency Operation ETL Rated Damp Location Model #73122 has Remote Capability for up to 2 Additional Standard Remote Lighting Fixtures 2 heads - 4 hours operation 3 heads - 2 hours operation 4 heads - 1.5 hours operation #73110 PRISM #73120/73122 LOW PROFILE SIDE LIGHTS Cat No. Style Color Length Depth Height Case Qty 73110 73111 Prism Prism White Black 12” 12” 2.25” 2.25” 5” 5” 6 6 73120 Low profile side lights White 16” 5” 5” 6 73121 Low profile side lights Black 16” 5” 5” 6 Each Remote Capable Cat No. Style Color Length Depth Height Case Qty 73122 Low Profile Side Lights White 16” 5” 5” 6 Each Remote Emergency Light Heads Used with remote capable emergency lights & remote capable combo exit/emergency light 73060 73064 Weatherproof 73062 73065 Weatherproof 73069 73068 73067 73066 Cat No. Weatherproof Heads Volts Watts Lamp 73060 73062 No No 1 2 6 6 5.4 7.2 Incandescent Incandescent 73066 No 1 6 5.4 Incandescent 73067 No 2 6 7.2 Incandescent 73068 No 1 6 5.4 MR-16 73069 No 2 6 7.2 MR-16 73064 Yes 1 6 5.4 Incandescent 73065 Yes 2 6 7.2 Incandescent Each 211 LIGHTING MR-16 Emergency Lighting Units Modern design with “EZ” install back plate and MR16 Halogen lamp for precise clean illumination Completely self-contained Fully automatic operation Compact, low profile design in neutral finish Universal mounting plate with “EZ” quick connect for rapid labor saving installation Push to test switch 6-volt, pure lead, maintenance-free battery Environmentally-coated, solid state charger Automatic, low voltage disconnect (LVD) Universal transformer for 120 or 277 VAC Injection-molded, V-O flame retardant, high impact, thermoplastic housing Charge rate/ power on LED indicator light Lamp wattage 2X5 watt Emergency operation 90 minutes Cat No. 73152 73154 Color White Black Case Qty 6 6 Each Remote Capable-Damp Location Listed Cat No. Color Watts Per Unit 73156 73157 White Black 22 22 Maximum Maximum Maximum Heads for 4 Heads for 2 Heads for 1.5 hrs Operation hrs Operation hrs Operation 2 2 3 3 4 4 * Based on 5 watt lamps Case Qty Each 6 6 Recessed Twin Head Emergency Lighting Units Recessed emergency lighting unit mounts flush with ceiling for a concealed, unobtrusive look Completely self-contained Compact, flush mount design Mounting bar hangers included 6-volt, pure lead, maintenance-free battery Environmentally-coated, solid state charger Automatic, low voltage disconnect (LVD) Universal transformer for 120 or 277 VAC Injection-molded, V-O flame retardant, high impact, thermoplastic housing Charge rate/ power on LED indicator light Large battery for remote capacity Push to test switch 90 minute emergency operation 6 Volt 7.2Watt #939 lamp Remote capable 212 Cat No. Color Case Qty 73158 White 6 Each LIGHTING Emergency Lighting Unit With Remote Capacity 6 Volt and 12 Volt Heavy Duty emergency lighting unit has remote capability, and is efficient and easy to install. It is completely selfcontained and fully-automatic. x Compact, low profile design in neutral finish x Push to test switch x 6-Volt premium grade, pure lead, maintenance-free batteries with 10-year expected life x Side and top conduit K/Os x Automatic low voltage disconnect (LVD). x Universal transformer for 120 or 277 VAC operation x Standard with two fully adjustable, glare free lighting heads x Charge rate/power on LED indicator light 50 Watt Units 100 Watt Units 6” 6” 14” 14” 8” 8” 8” 5” 12.5” 3” 12.5” 8” 6-Volt Units with Remote Capacity 7.2 Watt Lamps Cat No. Watts Per Unit Maximum Heads for 4 hrs Operation Maximum Heads for 2 hrs Operation Maximum Heads for 1.5 hrs Operation Case Qty 73166 73170 50 100 2 4 4 9 5 12 2 2 Each 12-Volt Units with Remote Capacity 9 Watt Lamps Cat No. Watts Per Unit Maximum Heads for 4 hrs Operation Maximum Heads for 2 hrs Operation Maximum Heads for 1.5 hrs Operation Case Qty 73176 73180 50 100 2 4 3 7 5 10 2 2 Each 213 LIGHTING LED Exit Sign x Superior Quality Exit Unit Combined with LED Energy Saving Technology In a Low-Profile, Unobtrusive Design x Completely Self-Contained x Fully Automatic Operation x Compact, Low Profile Design in Neutral Finish x Push to Test Switch in Battery Backup Units x Automatic, Low Voltage Disconnect (LVD) x 120 or 277 VAC Operation x Injection-Molded, V-O Flame Retardant, High Impact, Thermoplastic Housing x Charge Rate/Power On LED Indicator Light x Energy Consumption of Less than 4 Watts for Red Letters and Less than 2 Watts for Green Letters x Listed for Damp Location x Universal Mounting Canopy & 2 Face Plates for Side or Top Installation x Standard AC and Emergency Units Available x Ni-CAD Battery On Battery Backup Units x 90 Minute Battery Run Time x 700MAH 4.8V Nicad Battery Cat No. LED Color Housing Battery Backup Case Qty 73010 Red White No 6 73012 Red White Yes 6 73013 Red Black Yes 6 73014 Green White No 6 73016 Green White Yes 6 73017 Green Black Yes 6 Each Remote Capable Units Cat No. LED Color Housing Battery Backup Case Qty 73022 Red White Yes 6 73023 Red Black Yes 6 73024 Green White Yes 6 73025 Green Black Yes 6 Each 2 Circuit Unit Cat No. LED Color Housing Battery Backup Case Qty 73026 Red White Yes 6 73028 Green White Yes 6 Each Salida Face Plates 214 Cat No. Lettering Led Color Housing 73005 SALIDA Red White Each LIGHTING Combo LED Exit Emergency Light x Combination Energy Saving LED Exit Sign and Emergency Lighting Unit In One Compact Design x Completely Self-Contained x Fully Automatic Operation x Push to Test Switch x Automatic, Low Voltage Disconnect (LVD) x 120 or 277 VAC Operation x Charge Rate/Power On LED Indicator Light x 6-Volt 4.5AH Lead-Acid Maintenance-Free Battery Provides 90 minutes of Emergency Power x Environmentally-Coated, Solid State Charger x Injection-Molded, UL 94 V-O Flame Retardant, High Impact Thermoplastic Housing x Standard with Two Fully Adjustable Glare-Free 5.4 Watt DC Long Life Lamp Heads x Heads Rotate to Top or Side of Unit & 180o + for Maximum Flexibility in Field x Universal J Box Mounting Canopy & 2 Face Plates for Side or Top Installation x Models #73034 – 73037 have additional 12 Watt Remote Capability for up to 2 Additional Standard Remote Lighting Fixtures Base Unit (2 heads) - 4 hours operation 3 heads - 2 hours operation 4 heads - 1.5 hours operation x Damp Location Rated x UL 924 Cat No. Led Color Housing Width Depth Height Case Qty 73030 Red White 13.00” 2.50” 11.00” 4 73031 Red Black 13.00” 2.50” 11.00” 6 73032 Green White 13.00” 2.50” 11.00” 6 73033 Green Black 13.00” 2.50” 11.00” 6 Each Remote Capable Units Cat No. LED Color Housing Width Depth Height Case Qty 73034 Red White 13.00” 2.50” 11.00” 6 73035 Red Black 13.00” 2.50” 11.00” 6 73036 Green White 13.00” 2.50” 11.00” 6 73037 Green Black 13.00” 2.50” 11.00” 6 Each Salida Face Plates Cat No. Lettering Led Color Housing 73046 SALIDA Red White Each 215 LIGHTING Surface Mount Edge Lit LED Exit Signs Ceiling Mount Wall Mount Side Mount x Compact, low-profile design x Energy consumption of less than 3 watts for AC only and less than 5 watts for battery backup units x Emergency battery backup model is completely self-contained x Infield installable directional indicators x Tri-mount canopy provides top, end or back mount convenience (Surface only) x Premium Grade extruded aluminum housing Cat No. Surface 73310 73311 Panel Color Red on clear Red on clear 73312 Red on clear Housing Carton Qty Anodized Aluminum 6 White 6 Black Each Double Sided Face Panel for Surface & Recessed Mount Units 6 73315 Green on clear Anodized Aluminum 6 73316 Green on clear White 6 73317 Green on clear Black 6 x Standard AC and energy units available x AC on indicator light and test switch x Sealed lead battery x 120/277 Volt operation x Solid State electronics and charger board x UV stabilized ultra clear acrylic panel x Premium high output ultra bright LED’s x All units include single side face plate (must purchase double sided face plate separately if needed) Cat No. 73320 73322 Panel Color Red on clear Green on clear Recessed Mount Edge Lit LED Exit Signs 15.75” Good for Sheetrock & Recessed Ceilings 216 Cat No. Recessed Panel Color Housing Carton Qty 73330 Red on clear Anodized Aluminum 6 73331 Red on clear White 6 73332 Red on clear Black 6 73335 Green on clear Anodized Aluminum 6 73336 Green on clear White 6 73337 Green on clear Black 6 Each Each LIGHTING Cast Aluminum LED Exit Sign LED cast aluminum Series utilizes a unique illumination design in an architecturally pleasing housing Universal 120/277 VAC operation on all exits LED energy savings Damp location rated Universal canopy included (wall or ceiling mounted) Premium grade Ni-cad rechargeable battery Sleek Curved Design Powder Coat Finish Cat No. 73340 73343 Letter Color Housing finish Red Brushed Aluminum Red Black Curved design Spec grade Universal K/O chevrons Quick clip snap closure for front face plate Grounded safety cable All units include two face plates and flat back panel to allow 1 or 2 sided display Face color Brushed Aluminum Brushed Aluminum Carton Qty 6 6 73344 Red Black Black 6 73346 Red White Brushed Aluminum 6 73348 Red White White 6 73360 Green Brushed Aluminum Brushed Aluminum 6 73363 Green Black Brushed Aluminum 6 73364 Green Black Black 6 73366 Green White Brushed Aluminum 6 73368 Green White White 6 Each 217 LIGHTING Wet Location LED Exit Sign and Combo Unit Combo Battery Backup Unit Perfect for Outdoor Commercial & Industrial Facilities where exposure to Rain is normally al major Lighting Fixture problem ABS, corrosion resistant UV Stabilized enclosure AC only or self-powered models Universal 120/277 VAC operation Removable directional indicators Extremely low operating costs Meets NFPA life safety 101, NEC, OSHA, NEC, and local and state codes 90 minute emergency operation NEMA 3R Rated Exit Battery Backup Unit Enclosure is resistant to corrosive atmospheres, non-hazardous dust environments, water spray or splashing water Exit Battery Backup Units Cat No. 73390 73391 Letter Color Red Green Each Combo Battery Backup Units Cat No. 73393 Letter Color Red 73394 Green Each Emergency Lighting Unit Wet Location 6” 12.5” 6.5” 8.5” This enclosure is ideal for wet locations, resistant to corrosive atmospheres, non-hazardous dust environments, water spray or splashing water 218 6” ABS, corrosion resistant UV stabilized enclosure Dual 120 or 277 VAC input, field selectable Automatic brownout feature Solid-state charging circuit Solid-state line-latched low voltage disconnect provides 100% load disconnect protection to guard against battery deep discharge Short circuit and overload protection on DC output circuit Sealed momentary test switch Sealed AC ready light Wet location listed 2 X 7.2W lamp wattage 6V battery voltage 2 Remote Capable Heads allowed on Model #73397 Cat No. Type Emergency Operation 73396 Standard 90 min. 73397 Remote Capable 90 min. + Each LIGHTING Hard Wire LED Exit Sign Retrofit Kits Converts Incandescent Exit Light Units to LED 120 or 277 VAC Applications 2.8 Watts Per Kit Kits Complete with Mounting Bracket & Double Face Tape 1 Set of 2 Bulbs Cat No. 73080 73081 Description Hard Wire Unit Red LED Hard Wire Unite Green LED Each Set Screw In LED Exit Sign Retrofit Kits Converts Incandescent Exit Light Units to LED 120 VAC Applications, 2.8 Watts Per Kit Socket Adapter Supplied – for signs with Bayonet, Intermediate or Candelabra bases Each Unit is 5-1/8” Tall & 5/8” wide – add 1/8” with Adapters Priced Per Set of 2 Bulbs Cat No. 73082 73084 100,000 Hours Life Expectancy Description Screw in Unit Red LED Screw in Unit Green LED Each Set Polycarbonate Vandal/ Environmental Shield Guard H13.5” X W15” X D6” 73090 73091-73093 Cat No. 73090 73091 For Use With Exit Lights & Cast Aluminum Exit Lights Emergency Lights Size (Ht x W x D) 13.5” X 15” X 6” 8.4” x 18.7” x 6.5” 73092 Exit Lights & Cast Aluminum Exit Lights 15” x 22” x 8” 73093 Combo Exit/Emergency Lights 15” x 30.5” x 8” Each Wire Guard Cat No. 73095 73096 For Use With Emergency Lights, Exit Lights & Cast Aluminum Exit Lights Combo Emergency/Exit Lights Size (Ht x W x D) 13.5” X 15” X 6” 13.5” X 30” X 6” Each 219 LIGHTING Mini Wall Packs UL Listed for Wet Locations Corrosion Resistant Polycarbonate Lens & Bronze Finish Lamp & Phototeye Included Aluminum Base Plate with Conduit Knockout MULTIPLIERS FOR DIFFERENT MOUNTING HEIGHTS Mounting Height 8’ 10’ 12’ Multiply by 3.5 2.25 1.6 MULTIPLIERS FOR DIFFERENT WATTAGES Wattage 70 50 HPS Multiply by 1.0 .63 Fluorescent Multiply by 220 26 .36 Cat No. Lamp Volts Watts Lamp Base Carton Qty 71010 HPS 120V 50 Medium 6 71012 HPS 120V 70 Medium 6 71016 1 PL X 13W 120V 13 PL 6 71018 2 PL X 13W 120V 26 PL 6 72010 Replacement Frame & Polycarbonate Lens Mounted Each LIGHTING Small Wall Packs UL listed for Wet Locations Corrosion Resistant Borosilicate Glass Prismatic Lens Bronze Finish 3 Threaded Apertures for Conduit & Photo Control Lamp included Die Cast Aluminum Housing 7” 9.5” 70W MH @ 10’ Mounting Height Multiples of Mounting Height Isofootcandles MULTIPLIERS FOR DIFFERENT MOUNTING HEIGHTS Mounting Height 8’ 12’ 16’ Multiply by 1.6 .7 .4 20’ .25 MULTIPLIERS FOR DIFFERENT WATTAGES Wattage 150 100 HPS Multiply by 3.1 1.9 Metal Halide Multiply by 70 1.56 1.0 Cat No. Lamp Volts Watts Lamp Base Carton Qty 71020 HPS 120V 100 Medium 6 71025 HPS 120/208/240/277 150 Medium 6 71026 MH 120/208/240/277 70 Medium 6 71027 MH 120/208/240/277 100 Medium 6 72021 Replacement Door Frame with Glass Mounted 72022 Wireguard for Small Wallpack Each 221 LIGHTING Medium Wall Packs UL Listed for Wet Locations Corrosion Resistant Bronze Finish Die Cast Aluminum Housing High Impact, Heat Resistant Borosilicate Glass Lamp Included 2 Threaded Aperatures - Back for conduit & Top for Photocontrol 14 1/8” 175W MH @ 15’ Mounting Height Multiples of Mounting Height Isofootcandles MULTIPLIERS FOR DIFFERENT MOUNTING HEIGHTS Mounting Height 10’ 12’ Multiply by 2.25 1.56 15’ 1.0 MULTIPLIERS FOR DIFFERENT WATTAGES Wattage 175 HPS Multiply by Metal Halide Multiply by 222 150 100 1.19 1.0 .58 Cat No. 71030 71032 Lamp HPS HPS Volts 120V 120/208/240/277 Watts 150 150 Lamp Base Medium Medium 71034 MH 120/208/240/277 100 Medium 71036 MH 120/208/240/277 175 Medium 72030 Replacement Door Frame with Glass Mounted 72032 Wireguard for Medium Wallpack Each LIGHTING Large Wall Packs UL Listed for Wet Locations Corrosion Resistant Bronze Finish Die Cast Aluminum Housing High Impact, Heat Resistant Borosilicate Glass Lamp Included 2 Threaded Aperatures—(2) Back & (2) Top 12-7/8” 9-7/8” 400W HPS @ 20’ Mounting Height Multiples of Mounting Height Isofootcandles Mounting Height MULTIPLIERS FOR DIFFERENT MOUNTING HEIGHTS 16’ 20’ 24’ 28’ Multiply by 1.8 1.0 Wattage 400 250 HPS Multiply by 1.0 .6 Metal Halide Multiply by .8 .5 .7 .5 32’ 36’ .4 .3 MULTIPLIERS FOR DIFFERENT WATTAGES Cat No. 71040 71042 Lamp HPS MH Volts 120/208/240/277 120/208/240/277 Watts 250 250 Lamp Base Mogul Mogul 71050 HPS 120/208/240/277 400 Mogul 71052 MH 120/208/240/277 400 Mogul 72040 Replacement Door Frame with Glass Mounted 72042 Wireguard for Large Wallpack Each 223 LIGHTING Small Floodlight UL Listed for Wet Locations Corrosion Resistant Bronze Finish Die Cast Aluminum Housing Hinged, Tempered Glass Lens Adjustable Knuckle Lamp Included 6 1/4” 7” 9” 150W HPS @ 10’ Mounting Height Multiples of Mounting Height Isofootcandles MULTIPLIERS FOR DIFFERENT MOUNTING HEIGHTS Mounting Height 8’ 12’ 16’ Multiply by 1.5 .7 .4 20’ .25 MULTIPLIERS FOR DIFFERENT WATTAGES 224 Wattage 150 100 70 50 HPS Multiply by 1.0 .6 .35 .25 Cat No. 71060 71062 Lamp HPS HPS Volts 120 120 Watts 50 70 Lamp Base Medium Medium Case Qty 6 6 71064 HPS 120 100 Medium 6 71066 HPS 120 150 Medium 6 72050 Replacement Door Frame with Glass Mounted 72052 Wireguard for Small Floodlight Each LIGHTING Medium Floodlight UL Listed for Wet Locations Corrosion Resistant Bronze Finish Die Cast Aluminum Housing Hinged, Tempered Glass Lens Adjustable Knuckle Lamp Included 175W MH @ 15’ Mounting Height Multiples of Mounting Height Isofootcandles MULTIPLIERS FOR DIFFERENT MOUNTING HEIGHTS Mounting Height 12’ 15’ 18’ Multiply by 1.56 1.0 .70 MULTIPLIERS FOR DIFFERENT WATTAGES Wattage 175 100 70 Metal Halide Multiply by 1.0 .58 .37 Cat No. 71067 71068 Lamp MH MH 71069 MH Volts 120/208/240/277 120/208/240/277 Watts 70 100 Lamp Base Medium Medium Case Qty 6 6 120/208/240/277 175 Medium 6 72055 Replacement Door Frame with Glass Mounted 72057 Wireguard for Medium Floodlight Each 225 LIGHTING Large Floodlight UL Listed for Wet Locations Corrosion Resistant Bronze Finish Die Cast Aluminum Housing Hinged, Tempered Glass Lens Trunion Mount Included Lamp Included Pole Tenon Mount Available Lamp Included 13 3/8” 10 3/8” 15” #72065 Tenon Mount MULTIPLIERS FOR DIFFERENT MOUNTING HEIGHTS Mounting Height 20 25 30 Multiply by .57 .36 .25 MULTIPLIERS FOR DIFFERENT WATTAGES 400 250 HPS Multiply by 1.0 0.6 Metal Halide Multiply by 0.8 0.5 175 0.3 Cat No. 71070 71072 Lamp HPS MH Volts 120/208/240/277 120/208/240/277 Watts 250 250 Lamp Base Mogul Mogul 71074 HPS 120/208/240/277 400 Mogul 71076 MH 120/208/240/277 400 Mogul 72060 226 Wattage Replacement Door Frame with Glass Mounted 72062 Wireguard for Large Floodlight 72065 Pole Tenon Mount for Round Poles (2-3/8” Maximum Pole Diameter) 72066 Pole Top Trunion Each LIGHTING 300 & 500 Watt Quartz Floodlight UL Listed for Wet Locations Precision Die Cast Aluminum Housing Polished Aluminum Reflector Bronze Finish Includes Premium 500 Watt, T-3 Double Ended 120/130 Volt Halogen Lamp Hinged, Tempered Glass Lens 1/2” Threaded Swivel Knuckle for Flexible Aiming 3 5/8” 7 3/4” Cat No. 71079 71080 Description 300 Watt Quartz Floodlight - Bronze 500 Watt Quartz Floodlight - Bronze Style Screw Screw Case Qty 12 12 71081 500 Watt Quartz Floodlight - White Screw 12 Each 1500 Watt Quartz Floodlight UL Listed for Wet Locations Precision Die Cast Aluminum Housing Polished Aluminum Reflector Bronze Finish Hinged, Tempered Glass Lens 1/2” Threaded Swivel Knuckle For Flexible Aiming Includes 1500 Watt, T-3 Double Ended 240 Volt Halogen Lamp 5 3/4” 11” 14 5/8” Cat No. 71090 Description 1500 Watt Quartz Floodlight Case Qty 4 EACH 227 LIGHTING Dark Sky Wall Packs Meets Local Dark Sky Requirements which are in effect in various areas Light does allow light to shine up to the sky Excellent for use as an Uplight UL Listed for Wet Locations Corrosion Resistant Bronze Finish Die Cast Aluminum Hinged Front & Rear Housing Tempered Clear Glass Lens 3 Threaded Apertures for Conduit & Photo Control Lamp Included Large Specifications Medium Specifications 18.25” 14.25” 9.13” 9.13” 11.38” 13.75” MULTIPLIERS FOR DIFFERENT MOUNTING HEIGHTS Mounting Height 10’ 12’ 15’ Multiply by 2.25 1.56 1.0 MULTIPLIERS FOR DIFFERENT WATTAGES Wattage 175 HPS Multiply by Metal Halide Multiply by MULTIPLIERS FOR DIFFERENT MOUNTING HEIGHTS Mounting Height 20’ 25’ 32’ Multiply by 1.43 1.0 .57 MULTIPLIERS FOR DIFFERENT WATTAGES 150 Wattage 250 400 1.19 HPS Multiply by Metal Halide Multiply by .833 .625 1.0 1.0 Cat No. 71110 71112 Size Medium Medium Lamp HPS MH Dimensions WxHxD 14.25” X 9.13” X 11.38” 14.25” X 9.13” X 11.38” Volts 120 120/208/240/277 Watts 150 175 Lamp Base Medium Medium Case Qty 1 1 71114 Large HPS 18.25” X 9.13 X 13.75” 120/208/240/277 250 Mogal 1 71116 Large MH 18.25” X 9.13 X 13.75” 120/208/240/277 250 Mogal 1 71118 Large MH 18.25” X 9.13 X 13.75” 120/208/240/277 400 Mogal 1 72096 Replacement Door Frame with Glass Mounted for Medium Cutoff Wall Pack 72098 Replacement Door Frame with Glass Mounted for Large Cutoff Wall Pack 228 Each LIGHTING Vandal Resistant Fixtures UL Listed for Wet Locations Corrosion Resistant Bronze Finish Die Cast Aluminum Housing Clear Injection Molded Polycarbonate Lens Lamp Included Medium Specifications Large Specifications 9” 12-3/8” MULTIPLIERS FOR DIFFERENT MOUNTING Mounting Height 8’ 9’ 10’ Multiply by 1.0 .8 MULTIPLIERS FOR DIFFERENT MOUNTING HEIGHTS Mounting Height 8’ 9’ 10’ 12’ 14’ .6 Multiply by MULTIPLIERS FOR DIFFERENT WATTAGES 1.0 .8 .6 .4 .3 MULTIPLIERS FOR DIFFERENT WATTAGES Wattage 70 Wattage HPS Multiply by 1.0 HPS Multiply by Metal Halide Multiply by .9 Metal Halide Multiply by 175 150 1.0 .9 Cat No. 71093 71094 Size Medium Medium Lamp HPS MH Volts 120 120/208/240/277 Watts 70 70 Lamp Base Medium Medium Case Qty 8 8 71095 Large HPS 120 150 Medium 1 71096 Large MH 120/208/240/277 175 Medium 1 72090 Replacement Lens for Medium Vandal Resistant 72092 Replacement Lens for Large Vandal Resistant Each 229 LIGHTING Motion Activated Twin Par Light Turns Lights on Automatically When Motion is Detected Ideal for Walkways, Entrances and Patios Durable High Impact Nonmetallic Construction in White or Bronze Weather Resistant Housing Provides Years of Trouble-Free Service For Use with Two 150 Watt (Max) Outdoor Lamps (Lamps Not Included) 180 Degree Detection Angle and Up to 53 Feet Can be Wall or Eave Mounted Auto/Off/Manual Override Switch Time/Lux Adjustable Switch Reduces False Alarms AC 120V/60 Hz Voltage Cat No. 73210 73211 Color Bronze White Case Qty 12 12 Each Motion Activated Halogen Light Turns Lights on Automatically When Motion is Detected Ideal for Walkways, Entrances and Patios Durable High Impact Construction in White or Bronze Weather Resistance Housing Provides Years of Trouble-Free Service For use with one 150 watt (max) halogen lamp (lamp included) 110 Degree Detection Angle and Up to 40 Feet Can be Wall or Eave Mounted Auto/Off/Manual Override Switch Time/Lux Adjustable Switch Reduces False Alarms AC 120V/60 Hz Voltage Cat No. 73220 73221 Color Bronze White Case Qty 20 20 Each Bullets UL Listed for wet locations UL Listed for ground mounting Pre-wired and pre-assembled Die cast aluminum housing 230 1/2” adjustable knuckle Molded weatherproof gasket Drain hole Accepts 150 Watt Par38 max. Cat No. 73230 73231 Color Black White Box Qty 16 16 73232 Bronze 16 Each LIGHTING Porcelain Receptacles Fiberglass Receptacles 82114 82110 600 Watt Lampholder Top Wire Design Twist Lock Mounting Medium Base Fit 3-1/4” or 4” Box 4-1/2” Outside Diameter 600 Watt Lampholder Top Wire Design Twist Lock Mounting Medium Base Fit 3-1/4” or 4” Box 4-1/2” Outside Diameter Accepts Cages 82112 Cat No. Description Type Case Qty 82110 82111 Keyless Keyless Screw Terms 6” Lead 48 48 82112 Pull Chain Screw Terms 82113 Pull Chain 6” Lead 82114 Pull Chain w/Outlet Screw Terms Each Cat No. Description Type Case Qty 48 82115 82116 Keyless Keyless Screw Terms 6” Lead 48 48 48 82117 Pull Chain Screw Terms 48 48 82118 Pull Chain 6” Lead 48 Each Fluorescent Emergency Lighting Ballasts Model 72900 72904 Lumens 500 1400 Linear Lamps 2’-4’ Rapid, Instant, or Energy Savings, T8-T12 *All Ballasts have dual 120/277 volt input Fluorescent emergency ballast allows the same fixture to be used for both normal and emergency operation. Number of Lamps Supported 1 1 2’-8’ Rapid, Instant, or Energy Savings, T8-T12, HO, VHO 2 2’-8’ Rapid, Instant, or Energy Savings, T8-T12, HO, VHO 1 20W-40W Circline 1 20W-40W Circline 1 2 Compact Lamps In the event of a power failure, the ballast switches to the emergency mode and operates one or two of the existing lamps for a minimum of 90 minutes. 13, 18, 26 (4-pin) 1 1 13W-42W Twin Quad or Triple (4- 1 1 The unit contains a battery, charger, and inverter circuit in a single package. The ballast can be mounted in the wireway or on top of the fixture, and is UL listed for factory installation or retrofit applications. 40W Biax 1 50W Biax 1 55WBiax 1 Cat No. Length Width Height 72900 9.4” 2.4” 1.5” 72904 13.3” 2.4” 1.5” Each 231 LIGHTING Photocontrols SWIVEL BASE FIXED BASE These controls feature a heavy-duty thermal bi-metal switch that provides a 30-45 second time delay. This virtually eliminates unwanted lamp cycling that could be caused by lightning, car headlights, etc. Although the turn-on level is pre-set at the factory, each control is furnished with an adjustable slide bar that allows field adjustment. Typically mounts on fixtures or boxes. Weatherproof Polycarbonate Housing Single Pole, Single Throw Switch Temperature Range: -40F – +150F Contact Position at Night is Normally Closed Power Consumption Below 1.5 Watts Average Standard 1/2” I.P.S. Pipe Threaded Nipple 6” Color Coded Leads with Wiring Diagram on Control Cat No. Voltage Tungsten Rating Ballast Rating Master Box Qty 39010 39012 120 208-277 2000W 2000W 1000 (VA) 1000 (VA) 12 12 Does All Functions That Model #39010 Fixed Base Photocontrol Accomplishes Equipped with a Field Adjustable Swivel Base to Provide Maximum Installation Flexibility Each Cat No. Voltage Tungsten Rating Ballast Rating Master Box Qty 39020 39022 120 208-277 2000W 2000W 1000 (VA) 1000 (VA) 12 12 FLUSH MOUNT FLUSH MOUNT WITH WALL PLATE The 6” wire leads exit from the rear of the housing, allowing the control to be placed in tight locations while positioning the wire for easy access. Features a heavy-duty thermal bi-metal switch that provides a 30-45 second time delay. This virtually eliminates unwanted lamp cycling that could be caused by lightning, etc. Typically mounts in wall packs. Does All Functions That Model #39030 Flush Mount Photocontrol Accomplishes. Typically mounts on a weatherproof box. Weatherproof Polycarbonate Housing Single Pole, Single Throw Switch Temperature Range: -40F – +150F Contact Position at Night is Normally Closed Power Consumption Below 1.5 Watts Average 3/4” Long 3/8” Threaded Nipple & Nut for 1/2” K.O. 6” Color Coded Leads with Wiring Diagram on Control Cat No. Voltage Tungsten Rating Ballast Rating Master Box Qty 39030 120 1000W 1000 (VA) 12 Includes a Brushed Aluminum Wall Plate and Gasket for Installation in Standard Outlet boxes Each LOCKING TYPE Cat No. Voltage Tungsten Rating Ballast Rating Master Box Qty 39040 120 1000W 1000 (VA) 12 Polycarbonate Cover – High Temp Polyester Base Single Pole, Single Throw Switch Temperature Range: -40F – +150F Contact Position at Night is Normally Closed Power Consumption Below .9 Watts Average Three Pole Lock-Type Connector with Solid Brass Legs Thin cylindrical shape fits neatly between twin floodlights or other tight applications. Field adjustable swivel base makes it easy to direct the photocell away from stray light. “O” ring sealed to prevent water from entering through the knuckle. Heavy-duty thermal bimetal switch provides a 30-45 second time delay to eliminate unwanted lamp cycling that could be caused by lightning, car headlights, etc. Typically mounts on fixtures or boxes. Weatherproof Polycarbonate Housing Single Pole, Single Throw Switch Temperature Range: -40F – +150F Contact Position at Night is Normally Closed Power Consumption Below .9 Watts Average Standard 1/2” I.P.S. Pipe Thread Nipple 6” Color Coded Leads with Wiring Diagram on Control Cat No. 39050 Voltage 120 Tungsten Rating 1000W Ballast Rating 1800 (VA) Master Box Qty 12 39052 105-305 1000W 1800 (VA) 12 Cat No. Voltage Tungsten Rating Ballast Rating Master Box Qty 12 39060 120 1200W 1000 (VA) 12 232 Shorting Cap Each PENCIL TYPE SWIVEL MOUNT Locking-type photocontrol offers an economical and cost-effective means of controlling residential lighting systems from dusk to dawn. #39050 heavy-duty thermal bi-metal switch provides a 30-45 second time delay to eliminate unwanted lamp cycling that could be caused by lightning, car headlights, etc. Typically mounts in dusk to dawn fixtures. 39056 Each Each Each LIGHTING Compact Fluorescent Energy Saving Lamps (CFL’s) Energy Savings Comparisons Incandescent Bulb Morris Spiral 75 W 15 W 100 W 20 W 125 W 25 W Replaces incandescent lamps by providing similar lumens but using less watts and therefore saving energy and reducing energy bills CFL lamps have an average 8X longer life than incandescent lamps 120-130 volt, E26 Medium base (except candle) 2700K warm white color temperature Packaged in individual color boxes Spiral Cat No. Watts Lumens 79112 79115 79118 15 20 25 800 1300 1500 2U Diameter x Case Length Qty 2.4” X 5.1” 2.4” X 5.5” 2.4” X 5.9” Each Cat No. Watts Lumens 40 40 40 79132 79134 11 15 Mini Spiral 11 15 550 800 1.7” X 5.4” 1.7” X 5.4” Each 40 40 Cat No. Watts Lumens 79142 79144 79146 15 20 25 Reflector Cat No. Watts Type 79162 79164 79166 79168 9 13 15 20 R20 R25 R30 R40 79182 79184 Watts Lumens 15 20 800 1300 Each 40 40 800 1050 1325 Diameter x Case Length Qty 2.4” X 6.1” 2.4” X 6.5” 2.4” X 7.0” Each 40 40 40 A23 Diameter x Case Length Qty Each 2.5” x 4.7” 3.1” x 5.3” 3.7” x 5.9” 4.7” x 6.5” 40 40 40 20 Cat No. Watts Lumens 79172 79174 15 20 750 1000 40 40 2.7” X 6.6” 2.7” X 6.6” Each 40 40 Candelabra E12 Base Diameter x Case Length Qty Each 3.7” x 5.8” 3.7” x 5.8” Diameter x Case Length Qty Candle G30 Globe Cat No. 1.8” X 6.3” 1.8” X 7.2” 3U Diameter x Case Cat No. Watts Lumens Length Qty 79122 79124 550 800 Diameter x Case Length Qty Cat No. Watts Lumens 79192 7 350 Diameter x Case Length Qty 1.6” x 4.8” Each 40 233
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2011:07:12 13:04:03-04:00 Modify Date : 2011:08:05 11:28:52-04:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2011:08:05 11:28:52-04:00 Producer : Acrobat Distiller 9.0.0 (Windows) Format : application/pdf Title : untitled Document ID : uuid:cd2cf23f-bdba-4074-97d7-09fe00fc4abc Instance ID : uuid:0e861bb6-d796-44f7-8211-315cd5ea6199 Page Count : 239EXIF Metadata provided by EXIF.tools