604235 Catalog

684383-Catalog 684383-Catalog 684383-Catalog 783250 Batch6 unilog cesco-content

170307-Catalog 1 170307-Catalog_1 170307-Catalog_1 783250 Batch8 unilog cesco-content

125551-Catalog 1 125551-Catalog_1 125551-Catalog_1 Batch9 unilog cesco-content

103272-Attachment 103272-Attachment 103272-Attachment 781789 Batch5 unilog cesco-content

103272-Attachment 103272-Attachment 103272-Attachment 783250 Batch5 unilog cesco-content

2014-06-03

: Pdf 604235-Catalog 604235-Catalog 783250 Batch4 unilog

Open the PDF directly: View PDF PDF.
Page Count: 226 [warning: Documents this large are best viewed by clicking the View PDF Link!]

FULL
-
LINE CATALOG
WIRE TERMINATION
TOOLS & SUPPLIES
STRIPMASTER® WIRE STRIPPERS
TEST & MEASUREMENT
DATACOMM / NETWORKS
IDEAL FULL-LINE CATALOG
VISION. PERFORMANCE. SERVICE.
SINCE 1916
IDEAL INDUSTRIES, INC.
1375 Park Avenue, Sycamore, IL 60178, USA / 815-895-5181 800-435-0705 in USA
International offices: Australia Brazil Canada China Germany Mexico Puerto Rico UK
For complete sales office contact information, visit us at:
www.idealindustries.com
Rev. 1/13
Printed in U.S.A.
Form No. P-070
©2013 IDEAL INDUSTRIES, INC.
IDEAL, an American Original
We listen, and we deliver products with a purpose.
Entrepreneurial in spirit, grounded in the values of American ingenuity, IDEAL was founded
on the basis that every product we make will exceed the value of the price paid for it. Today,
we exemplify those values in our products, our customer service and our vision for the future
of our business. We are investing in the success and revitalization of American ingenuity and
we are committed to manufacturing American Value in every product we make.
Today’s global economy demands we look at doing business more creatively, more
competitively and more efficiently. IDEAL is on the leading edge of product development
and design, integrating those ideas through strategic investment, implementation of lean
manufacturing and just-in-time inventory. Field-tested and customer influenced design
means we are creating some of the most forward thinking tool designs in the industry.
IDEAL is with you every step of the way
From the introduction of the first twist-on wire connector, IDEAL has been a leading force in wire
termination and installation technologies. Through ingenuity, proven performance and innovative
engineering, IDEAL continues to lead the electrical industry with products that deliver value
greater than the price paid for them.
TerminaTion
Technology
IDEAL is the leader of
market share in wire
termination. The two
nearest competitors
combined total less
than 25% of market
share. For wire
termination, IDEAL
is industry standard.
Wire PUlling
lUBricanT
Top market share in
lubes belongs to IDEAL.
The environmentally
safe lubes from IDEAL
provide exceptional
lubricity for rapid pulls.
FiSh TaPe
IDEAL holds the
top market share in
fish tapes. IDEAL
manufactures a variety
of fish tapes for all
applications, and our
durable, impact-
resistant cases are the
best on the market.
conDUiT
BenDer
IDEAL leads with
the majority market
share in benders.
IDEAL benders
are constructed of
exceptionally durable
materials and reinforced
at stress points for
extra long life.
Wire STriPPer
IDEAL holds the
#1 spot in market
share of wire strippers.
Ergonomically designed
in a variety of models for
every application, IDEAL
manufactures the finest
wire strippers on the
market.
This information is based
on 2011 Epicor/Vista data.
TABLE OF CONTENTS
Wire TerminaTion
Twist-on Wire Connectors ..........................a-2
WeatherProof® & UnderGround® Wire Connectors . . . . . . . .a-5
PowerPlug® Luminaire Disconnects ..................a-8
SpliceLine™ In-Line Wire Connectors .................a-8
In-Sure™ Push-In Wire Connectors. . . . . . . . . . . . . . . . . . .a-9
Grounding Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . .a-10
Crimp Terminals & Splices ........................ a-11
Terminal Strips ...................................a-14
BUCHANAN Wire Connectors .....................a-19
BUCHANAN Tap Connectors ..................... a-21
BUCHANAN Streetlight Kits . . . . . . . . . . . . . . . . . . . . . . a-22
BUCHANAN Terminal Blocks ..................... a-28
ToolS & SUPPlieS
Fish Tapes & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .B-2
Fishing Poles .....................................B-7
Wire Pulling Lubricants & Accessories ................B-8
Conduit Benders .................................B-12
Pulling Supplies ..................................B-14
Wire Strippers ...................................B-16
Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-21
Miscellaneous Hand Tools .................. B-26, B-30
Cable Cutters ....................................B-28
Screwdrivers ....................................B-32
Industrial Bits & Accessories .......................B-43
Insulated Hand Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-46
Hand Tool Kits ...................................B-52
Tool Carriers & Bags ............................. B-54
Cutting & Holemaking Tools ........................B-57
Cable Ties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-68
Cable Staples ....................................B-74
Heat Shrink. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-75
Heat Guns ......................................B-78
Wire Markers ....................................B-79
Switches ........................................B-81
Lockout/Tagout ................................. B-88
Safety Signs .....................................B-97
Safety Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-98
Commutator Maintenance .......................B-109
STriPmaSTer®
Wire STriPPerS
Stripmaster® Wire Strippers .........................c-2
Custom Stripmaster® Wire Strippers . . . . . . . . . . . . . . . . . . c-4
TeST & meaSUremenT
Clamp Meters ....................................D-2
Multimeters ......................................D-5
Circuit Tracers ....................................D-9
Thermal Imagers ................................ D-10
Circuit Analyzers ................................ D-12
Power Quality ................................... D-14
Insulation Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-15
Voltage Testers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-16
Electrical Testers .................................D-17
Specialty Testers ................................ D-19
Accessories .................................... D-20
DaTacomm/neTWorkS
Testers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . e-2
Compression Tools & Connectors ...................e-10
Crimp Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . e-14
Tools ...........................................e-16
Strippers ........................................e-19
Kits ............................................e-23
Fiber Optics .....................................e-27
QUICK CHANGE
SCREWDRIVER
The Quick Change Screwdriver
is the ultimate multi-bit tool.
Simply insert any standard bit
into the socket or use as a 1/4”
nutdriver. To switch to a different
bit, pull back the gold knurled
collar, remove the bit and snap in
another. The tail-end features the
E-Z Spin™ high torque rotating flip
cap with built in bit storage that
holds up to five extra insert bits.
NEW PRODUCTS FROM IDEAL
Whether you’re an industry professional or a DIY weekend warrior,
you know that having the right tool for the job cuts your work to
a fraction of the investment in time and frustration. The product
development team at IDEAL works tirelessly to introduce innovative
new products, as well as putting a handy new spin on the tried and
true. Time is money, and IDEAL saves you both!
Go to www.idealindustries.com/whatsnew/products/ to learn more about our newest products.
Cap flips open for
built-in bit storage
FastFinder™ handle
COMBO HEAD™
CUSHIONED-GRIP
SCREWDRIVER
Different sizes of Combination
Fasteners mean using different
tools, right? Wrong! The Combo
Head™ was designed to fit
snuggly into multiple sizes of
Combo Screws, eliminating the
need to buy more bulky tools.
Among the competition, the IDEAL
Combo Head™ tip features the
most touch points, minimizing
cam-out and stripping. See and
feel the difference for yourself!
INDUSTRIAL
SCREWDRIVER BITS
IDEAL Industrial Screwdriver Bits
are designed for precision fit and
lasting performance. Bits are
constructed from S2M tool steel
and custom heat treated for
strength and durability. All tips are
carefully manufactured to tight
tolerances to insure accurate fit
and full fastener engagement!
LINEARX™
COMPRESSION TOOLS
The LinearX™ Compression Tools
are the newest addition to the
IDEAL offering of termination
tools for coaxial compression
connectors. LinearX™ brings
several of the qualities and features
of our professional OmniSeal™
Pro Series of tools into a smaller,
simpler, value priced tool. These
are ideal for installers that are
converting from traditional
crimping tools or those that only
occasionally work with coaxial
cable terminations.
UL Listed for submersibility.
LinearX3 adjustable post
SLK® DISCONNECT
FUSE KITS
Used primarily in streetlighting
and roadway lighting, the SLK®
is the first Disconnect Fuse Kit
listed to ULs ECIS category for
special purpose connectors.
This new category contains
a set of rigorous tests from a
host of UL standards, including
UL 486D, the standard for
submersibility. This means that
the SLK® will stand up to the
wet conditions often seen in
and around pole bases, junction
boxes and hand holes.
HEATSEEKER®
THERMAL IMAGERS
Troubleshoot and identify potential
problems before they happen with
the IDEAL HeatSeeker® Thermal
Imagers. What makes HeatSeeker®
so useful are the dual cursors that
instantly locate the hottest and
coldest temperatures on a live
screen, and the camera’s ability to
blend a thermal image on top of a
digital image for easy on-the-job
decision making. The HeatSeeker®
Thermal Imager’s easy set-up and
operation make it a cost-effective
tool for electrical service, industrial
maintenance, building inspection
and data center evaluation.
Connectors designed for every application
The industry’s premier wire connector. Just three models accommodate
the majority of common wiring configurations from 22 through 6 AWG.
The ribbed cap provides a secure grip and swept wings offer extra
leverage. A patented square-wire spring provides safe, secure
connections.
Twister®
Wire-Nut®
Wire Connectors
The original twist-on wire connector features
a positive-grip design for easy installation. Five
color-coded models cover hundreds of wire
combinations from 22 through 6 AWG. The fixed
square-wire spring provides a secure connection
that won’t relax over time.
Wing-Nut®
Wire Connectors
The next step in IDEAL wire connector innovation. Three
models accommodate a wide range of circuit and fixture
wiring combinations from 18 through 6 AWG. Built-in,
contoured wings provide extra leverage on maximum wire
combinations. And the live-action spring expands to
accept a broader range of wire shapes and sizes.
B-CAP®
Wire Connectors
Contoured Classic Fin™ design provides a secure
grip for extra torque. Three models cover a full
range of wire sizes from 22 through 6 AWG. The
square-wire spring locks onto conductors for fast,
secure connections. The low-profile shape allows
easy handling and installation.
WeatherProof® / UnderGround®
Wire Connectors
Twist-on connectors for underground and wet location installations. Covers a wide
range of wire sizes from 22 through 6 AWG. Features non-hardening silicone sealant
to ensure safe, moisture-free electrical connections. UL Listed and CSA Certified for
damp/wet and direct burial applications.
Twister® Al/Cu
Wire Connectors
The only aluminum-to-copper twist-on
wire connector. Specially formulated
compound reduces corrosion build-up
on aluminum conductors for better
conductivity and cooler connections. UL
Listed and CSA Certified for aluminum-to-
copper connections.
Wire Connectors
Based on 2011 data available from Epicor/Vista.
Wire Connector Application Guide
Twister®
340® Lt. Blue l l l l l l l
341® Tan l l l l l l l l l
344® Red/Yellow ll l l ll lllll
342® Gray l l l l l
Wire-Nut®
71B® Gray l l l
72B® Blue l l l l l
73B® Orange l l l l l l l
74B® Yellow l l l l l l
76B® Red l l l l l l l l l l
Wing-Nut®
451® Yellow l l l l l l l
452® Red l l l l l l l l l l
454® Blue l l l l l
B-CAP®
B1 Yellow l l l l l l l l
B2 Red l l l l l l l l l l
B4 Blue l l l l l
B-Twist™
BT2™ Red l l l l l l l l l l
WingTwist™
WT51 Yellow l l l l l l l l
WT41 Tan l l l l l l l l l
WT52 Red l l l l l l l l l l
WT54 Blue l l l l l
WireTwist™
WT1 Gray l l l
WT2 Blue l l l l l
WT3 Orange l l l l l l l
TW4 Yellow l l l l l l l
WT6 Red l l l l l l l l l l
WeatherProof®
61® Gray/Orange l l l l l l l l
62® Gray/Red l l l l l l l l l
63® Gray
/Dk. Blue
lll l l llll
UnderGround®
60® Gray/Blue l l l l l l l l l l
64® Gray
/Dk. Blue
l l l l l l l
66® Gray
/Dk. Blue
l l
RESIDENTAL
COMMERCIAL
Light Switches
Can Lights
Receptacles
Thermostat Controls
Smoke/CO Detectors
Ceiling Fans
HVAC
Garage Door Openers
Door Bells
Multi-Gang Switch Boxes
Security Systems
Intercoms
Recessed Lighting
Controls
Illuminated Signage
Receptacles
3-Phase Motors
HVAC
RESIDENTAL
COMMERCIAL
Landscape Lighting
Patio/Deck Lighting
Pool Filters/Controls
Bathroom/Spa Vent Fans
Basement/Garage
Outdoor Power Outlets
Security Systems
Lawn-Sprinkler Controls
Sump/Well Pumps
Landscape Lighting
Security Systems
Exterior Lighting
Street/Parking Lot Lighting
Car Washes
Processing Plants
Traffic Signals
Ejection Pumps
HVAC
Model
Wire Range Chart
MIN. 2 #18 MAX. 4 #10
2 #22 3 #22 2 #20 3 #20 2 #18 2 #16 3 #16 2 #14 3 #14 2 #12 4 #14 3 #12 4 #12 3 #10 5 #12 4 #10 2 #6
Wire-Nut®
71B® Gray (300V)
72B® Blue (300V)
73B® Orange
74B® Yellow
76B® Red
Wing-Nut®
451® Yellow
452® Red
454® Blue
Twister®
340® Lt. Blue
341® Tan
344® Red/Yellow
342® Gray
B-CAP®
B1 Yellow
B2 Red
B4 Blue
WingTwistTM
WT51 Yellow
WT41 Tan
WT52 Red
WT54 Blue
WireTwistTM
WT1 Gray (300V)
WT2 Blue (300V)
WT3 Orange
WT4 Yellow
WT6 Red
WeatherProof®
61® Gray/Orange
62® Gray/Red
63® Gray/Dark Blue
MIN. 2 #22 MAX. 3 #16
MIN. 2 #22 MAX. 3 #12
MIN. 1 #18 w/ 1 #20 MAX. 2 #14
MIN. 2 #18 MAX. 4 #14 w/1 #18
MIN. 2 #14 MAX. 4 #12
MIN. 2 #14 MAX. 4 #12
MIN. 2 #22 Str. MAX. 2 #16
MIN. 2 #18 MAX. 4 #10
MIN. 2 #18 MAX. 5 #12
MIN. 2 #18 MAX. 3 #10
MIN. 2 #14 MAX. 5 #12
MIN. 3 #22 MAX. 3 #10
MIN. 3 #22 MAX. 2 #16
MIN. 2 #20 MAX. 3 #10
MIN. 2 #20 MAX. 2 #14
MIN. 1 #20 w/ 1 #18 MAX. 1 #10 w/ 2 #12
MIN. 2 #18 MAX. 3 #12
MIN. 2 #18 MAX. 3 #12
MIN. 2 #18 MAX. 2 #14
MIN. 3 #20 MAX. 3 #12
MIN. 3 #20 MAX. 3 #16
MIN. 2 #18 MAX. 2 #12
MIN. 3 #12 MAX. 1 #6 w/ 2 #8
MIN. 3 #12 MAX. 2 #6
MIN. 3 #14 MAX. 2 #8 w/ 2 #12
MIN. 3 #14 MAX. 5 #10
MIN. 2 #18 Sol. MAX. 3 #10
MIN. 3 #12 MAX. 2 #6 w/ 1 #10
MIN. 2 #12 MAX. 2 #6
MIN. 1 #20 w/ 1 #18 MAX. 1 #10 w/ 2 #12
MIN. 2 #18 Sol. MAX. 3 #10
MIN. 2 #18 MAX. 4 #10
60® Yellow
64® Yellow
UnderGround®/MudBug®
60® Gray/Blue
64® Gray/Dark Blue
66® Gray/Dark Blue
B-TwistTM
BT2 Red MIN. 2 #18 MAX. 2 #8
Model: Wire Combinations:
2 #22 3 #22 2 #20 3 #20 2 #18 2 #16 3 #16 2 #14 3 #14 2 #12 4 #14 3 #12 4 #12 3 #10 5 #12 4 #10 2 #6
Wire TerminaTion
a
TWisT-on Wire ConneCTors ..............a-2
WeaTherProof® & UnderGroUnd®
Wire ConneCTors ...........................a-5
Wire ConneCTor aCCessories ...........a-7
LUminaire disConneCTs .....................a-8
sPLiCeLine™ in-Line
Wire ConneCTors ...........................a-8
PUsh-in Wire ConneCTors ................a-9
GroUndinG aCCessories ....................a-10
CrimP TerminaLs, disConneCTs,
sPLiCes ............................................a-11
TerminaL sTriPs .................................a-14
CrimP ConneCTors ............................a-16
BUChanan Wire ConneCTors .......a-19
TaP ConneCTors .................................a-21
sTreeTLiGhT KiTs .................................a-22
TerminaL BLoCKs ................................a-28
Based on 2011 data available from Epicor/Vista.
A-2
Wire ConneCTors
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Wire TerminaTion
• Fivecolor-codedmodelscoverwiresizesfrom22to6AWG
• Fixed,square-wirespringcreatesitsownthreads—maintainsasecurepositivegripthat
willnotrelaxovertime
• Nopre-twistingrequired—positivegripdesignprovidesfast,easyinstallation
• Deepskirthelpsprotectagainstflash-over
• Reusableforeasycircuitchangesandadditions
• Tough,UL94V-2flame-retardantshellratedat105oC(221oF)
• ULListedto486CandCSAcertifiedtoC22.2#188;
 complywithFederalSpecificationW-S-610E
Wire-Nut® Wire Connectors
High Temperature Wire-Nut® Wire Connectors
Model Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No.
71B®
Gray
300V
22 to 16 AWG
Min. 2 #22 – Max. 2 #16
300V
,34mm2 to 1,5mm2
Min. 2-,34mm2 Max. 3-1,5mm2
Box of 100 30-071
Carton of 1,000 30-171
Keg of 25,000 (loose pack) 30-271
Barrel of 150,000 30-871
72B®
Blue
300V
22 to 14 AWG
Min. 2 #22 – Max. 3 #16
300V
,34mm2 to 2,5mm2
Min. 2-,34mm2 Max. 3-1,5mm2
Box of 100 30-072
Carton of 1,000 30-172
Keg of 10,000 (loose pack) 30-272
Barrel of 85,000 30-872
73B®
Orange
600V*
22 to 14 AWG
Min. 1 #18 & 1 #20
Max. 2 #14
600V*
,34mm2 to 2,5mm2
Min. 1-,75mm2 w/1-,50mm2
Max. 4-1,5mm2 w/1-,50mm2
Box of 100 30-073
Jar of 300 30-073J
Carton of 1,000 30-173
Bag of 500 30-273
Keg of 10,000 (loose pack) 30-673
Barrel of 50,000 30-873
74B®
Yellow
600V*
18 to 12 AWG
Min. 2 #18
Max. 4 #14 & 1 #18
600V*
,75mm2 to 4,0mm2
Min. 2-,75mm2
Max. 4-2,5mm2 w/1-,75mm2
Box of 100 30-074
Jar of 175 30-074J
Carton of 1,000 30-174
Bag of 500 30-274
Keg of 5,000 (loose pack) 30-674
Barrel of 35,000 30-874
76B®
Red
600V*
18 to 6 AWG
Min. 2 #14
Max. 4 #12
600V*
,75mm2 to 16,0mm2
Min. 2-2,5mm2
Max. 2-4,0mm2
Box of 100 30-076
Jar of 150 30-076J
Carton of 1,000 30-176
Bag of 250 30-276
Barrel of 15,000 30-876
*1,000V maximum in fixtures and signs
Yellow and red Wire-Nut®
Wire Connectors can
easily be applied using
the Twist-a-Nut
Screwdriver.
  WireCombinatio•WireCombinatio•
Model Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No.
71B®
Black
300V
22 to 16 AWG
Min. 2 #22 Str
Max. 2 #16
300V
,34mm2 to 1,5mm2
Min. 2-,34mm2
Max. 2-1,5mm2
Box of 100 30-3627
Carton of 1,000 30-151
Keg of 25,000 (loose pack) 30-251
Barrel of 150,000 30-801
72B®
Black
300V
22 to 14 AWG
Min. 2 #22
Max. 3 #16
300V
,34mm2 to 2,5mm2
Min. 2-,34mm2
Max. 3-1,5mm2
Box of 100 30-3628
Carton of 1,000 30-152
Keg of 10,000 (loose pack) 30-252
Barrel of 85,000 30-802
73B®
Black
600V*
22 to 14 AWG
Min. 1 #18 w/1 #20
Max. 2 #14
600V*
,34mm2 to 2,5mm2
Min. 1-,75mm2 w/1-,50mm2
Max. 4-1,5mm2 w/1-,50mm2
Box of 100 30-3629
Carton of 1,000 30-153
Keg of 10,000 (loose pack) 30-253
Barrel of 50,000 30-803
59B®
Black
600V*
22 to 12 AWG
Min. 2 #20
Max. 3 #14
600V*
,34mm2 to 4,0mm2
Min. 2-,5mm2
Max. 3-2,5mm2
Box of 100 30-059
Carton of 1,000 30-159
Keg of 5,000 (loose pack) 30-259
Barrel of 35,000 30-809
*1,000V maximum in fixtures and signs
AlloftheWire-Nut®WireConnectorfeaturesplus:
• Black,thermoplasticshelldesignedtowithstandextremeheatbuild-upfoundinhigh-wattagelightfixturesandsigns.UL
Listedto150°C(302°F)
• Fourmodelstocoverwirerangesfrom22to12AWG
A-3
Wire ConneCTors
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
• Threecolor-codedmodelscoverafullrangeofwiresizesfrom18to6AWG
• Speciallydesignedcontouredwingsprovideasecuregripforextraleverageonmaximum
wirecombinations
• Live-actionspringexpandstoacceptwireshapeandsizewithnopre-twistingrequired
• Square-wirespringthreadsdirectlyontoconductorsforfast,secureconnections
• Deepskirthelpsprotectagainstflash-overandturned-backstrandsformaximum
dielectricprotection
• Tough,UL94V-2flame-retardantshellratedat105°C(221°F)
• ULListedto486CandCSACertifiedtoC22.2#188;complywithFederalSpecification
W-S-610E
Wing-Nut® Wire Connectors
Greenie® Grounding Wire Connectors
The red Wing-Nut®
Wire Connector will
accommodate up to
4 #10 wires.
Model Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No.
451®
Yellow
600V*
18 to 10 AWG
Min. 2 #18
Max. 3 #12
600V*
,75mm2 to 6,0mm2
Min. 2-,75mm2
Max. 3-4,0mm2
Box of 100 30-451
Jar of 225 30-451J
Jar of 500 30-651J
Carton of 1,000 30-551
Bag of 500 30-651
Barrel of 35,000 30-851
452®
Red
600V*
18 to 8 AWG
Min. 2 #18
Max. 4 #10
600V*
,75mm2 to 10,0mm2
Min. 2-,75mm2
Max. 4-6,0mm2
Box of 100 30-452
Jar of 300 30-452J
Jar of 500 30-652J
Carton of 1,000 30-552
Bag of 500 30-652
Barrel of 25,000 30-852
454®
Blue
600V*
14 to 6 AWG
Min. 3 #12
Max. 1 #6 & 2 #8
600V*
2,5mm2 to 16,0mm2
Min. 3-4,0mm2
Max. 2-16,0mm2 w/1-4,0mm2
Box of 25 30-454
Carton of 250 30-554
Bag of 100 30-654
Barrel of 10,000 30-854
*1,000V maximum in fixtures and signs
• Designedformakinggroundconnectionsandbondingnon-metallicsheathedcable
• Contouredwingsformaximumleverage
• Live-action,square-wirespringprovidessuperiorgroundingconnections
• Tough,UL94V-2flame-retardantshell
• ULListedto467andCSACertifiedtoC22.2#188;complywithFederalSpecificationW-S-610E
Greenie® Grounding Connector fully meets the intent of the N.E.C. and specifically aids in
compliance with the following:
ARTICLE 250: GROUNDING
250-146 Connecting Receptacle Grounding Terminal to Box
250-148 Continuity and Attachment of Equipment Grounding Conductors to Boxes
(B) Grounding continuity
(D) Nonmetallic boxes
Model Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No.
92®
Green
14 to 10
Min. 2 #14
Max. 4 #12
2,5mm2 to 6,0mm2
Min. 2-2,5mm2
Max. 2-4,0mm2 w/1-2,5mm2
Box of 100 30-092
Jar of 150 30-092J
Carton of 1,000 30-192
Bag of 500 30-292
Barrel of 25,000 30-992
See Page A-10 for more
IDEAL Grounding Products!
A-4
Wire ConneCTors
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
• Exceptionalwire-rangecapacity—threecolor-codedmodelshandlewirecombinations
fromassmallas22AWGtoaslargeas6AWG
• Ribbedcapprovidesasecuregripandfastfingertipstarts
• Sweptwingsofferextraleverageandlesseffortforlargewirecombinations
• Hexagonalshapeaccommodatesstandardnutdriverfortoolinstallation
• Live-action,square-wirespringlocksontowireforsafe,secureconnections
• Deepskirthelpsprotectagainstflash-overandturned-backstrandsformaximum
dielectricprotection
• Tough,UL94V-2flame-retardantshellratedat105°C(221°F)
• ULListedto486CandCSACertifiedtoC22.2#188;complywithFederalSpecification
W-S-610E
Twister® Wire Connectors
Wire Connectors
Small profile of Twister® LT is
perfect for recessed lighting
applications.
Model Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No.
340®
Lt. Blue
600V*
22 to 10 AWG
Min. 2 #22
Max. 3 #12
600V*
,34mm2 to 4,0mm2
Min. 2-,34mm2
Max. 3-4,0mm2
Box of 100 30-340
Jar of 500 30-640J
Barrel of 35,000 30-840
341®
Tan
600V*
22 to 8 AWG
Min. 3 #22
Max. 3 #10
600V*
,34mm2 to 10,0mm2
Min. 3-,34mm2
Max. 3-6,0mm2
Box of 100 30-341
Jar of 400 30-441J
Jar of 750 30-341J
Carton of 1,000 30-541
Bag of 500 30-641
Barrel of 25,000 30-841
342®
Gray
600V*
18 to 6 AWG
Min. 3 #14
Max. 2 #8 w/2 #12
600V*
,75mm2 to 10,0mm2
Min. 3-2,5mm2
Max. 2-10,0mm2 w/2-4,0mm2
Box of 50 30-342
Bag of 250 30-642
Barrel of 15,000 30-842
*1,000V maximum in fixtures and signs
• Thewidest red/yellow wire rangeintheindustry;min.2#18tomax.4#10
• SureGrip™overmoldingprovidesbettergripforimprovedleverage,moretorqueandfaster
connections
• Comfortablesweptwingsdesignedtohelpreducehandfatigue
• Expandingsquare-wirespringprovidesasecureconnectioneverytime
• Tough,UL94V-2flame-retardantshellratedat105°C(221°F)
• ULListedto486CandCSACertifiedtoC22.2#188;complywithFederal
 SpecificationW-S-610E
Model Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No.
344®
Red/Yellow
600V*
22 to 8 AWG
Min. 2 #18
Max. 4 #10
600V*
,34mm2 to 10,0mm2
Min. 2-,75mm2
Max. 4,0-6,0mm2
Box of 50 30-144
Jar of 250 30-244J
Jar of 500 30-644J
Barrel of 20,000 30-944
*1,000V maximum in fixtures and signs
The Twister® Pro is a high
performance connector with the
industry’s widest wire range of
any red/yellow connector.
Wire TerminaTion
A-5
Wire ConneCTors
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
• Silicone-basedsealantprotectsagainstmoistureandcorrosion
• ULListedto486Dforuseindamp/wetlocationsordirectburial
• Easytoapply,pre-filledtwist-onwireconnectors
• Handleswiresizesfrom22to6AWGcopperconductors
• Tough,UL94V-2flame-retardantshellratedat105°C(221°F)
• ULListedto486CandCSACertifiedtoC22.2#188;complywithFederalSpecification
W-S-610E
WeatherProof® and UnderGround® Wire Connectors
Wire Connectors
The silicone-based sealant
protects electrical connections
against harsh conditions,
eliminating the need for heat
-shrink or excessive taping.
WeatherProof® — suitable for interior and exterior electrical connections
exposed to rain or damp conditions.
UnderGround® — suitable for use in a wide variety of direct burial and wet location
electrical connections.
WeatherProof® Wire Connectors
Model Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No.
61®
Gray/Orange
600V*
22 to 14 AWG
Min. 2 #20
Max. 2 #14
600V*
,34mm2 to 4,0mm2
Min. 2-,5mm2
Max. 2-2,5mm2
Card of 6 30-061
Card of 25 30-161
Box of 100 30-261
Box of 1,000 30-361
62®
Gray/Red
600V*
18 to 8 AWG
Min. 2 #18
Max. 3 #10
600V*
,75mm2 to 10,0mm2
Min. 2-,75mm2
Max. 3-6,0mm2
Card of 5 30-062
Card of 20 30-162
Box of 100 30-262
Box of 1,000 30-362
63®
Gray/Dk. Blue
600V*
16 to 6 AWG
Min. 3 #14
Max. 5 #10
600V*
1,5mm2 to 16,0mm2
Min. 2-2,5mm2
Max. 2-10,0mm2 w/1-6,0mm2
Card of 3 30-063
Card of 15 30-163
Box of 100 30-263
Box of 1,000 30-363
*1,000V maximum in fixtures and signs
UnderGround® Wire Connectors
Model Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No.
60®
Gray/Blue
600V*
20 to 10 AWG
Min. 1 #20 w/1 #18
Max. 1 #10 w/2 #12
600V*
,5mm2 to 6,0mm2
Min. 1-,5mm2 w/1,75mm2
Max. 1-6,0mm2 w/2-4,0mm2
Card of 2 30-060
Card of 10 30-760
Box of 25 30-160
Box of 100 30-260
Box of 1,000 30-360
64®
Gray/Dk. Blue
600V*
18 to 8 AWG
Min. 2 #18 Sol.
Max. 3 #10
600V*
,75mm2 to 10,0mm2
Min. 2-,75mm2 Sol.
Max. 3-6,0mm2
Card of 2 30-064
Card of 10 30-764
Box of 50 30-264
Box of 1,000 30-364
*1,000V maximum in fixtures and signs
A-6
Wire ConneCTors
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
• Connectsundergroundgastracerlinesprovidingsuperiorprotection
• Moistureandcorrosionresistant,pre-filledwithnon-hardening,100%silicone
• 20-8AWGwirerangecapacity
• ULListedtodirectburialteststandard486Dupto600Vmaximumvoltage
Utility Wire Connectors
FILLED WIRE CONNECTORS
FILLED WIRE CONNECTORS
WEATHERPROOF WIRE CONNECTORS
UTILITY WIRE CONNECTORS
UNDERGROUND™ WIRE CONNECTORS
UTILITY WIRE CONNECTORS
UTILITY WIRE CONNECTORS
®
Model Color Wire Combination
Range
Wire Combination
Range (mm) Quantity Cat. No.
60®
Yellow
600V*
20 to 10 AWG
Min. 1 #20 w/1 #18
Max. 1 #10 w/2 #12
600V*
,5mm2 to 6,0mm2
Min. 1-,5mm2 w/1 ,75mm2
Max. 1-6,0mm2 w/2-4,0mm2
Box of 25 30-160Y
Box of 1,000 30-360Y
64®
Yellow
600V*
18 to 8 AWG
Min. 2 #18 Sol.
Max. 3 #10
600V*
,75mm2 to 10,0mm2
Min. 2-,75mm2 Sol.
Max. 3-6,0mm2
Box of 25 30-164Y
Box of 1,000 30-364Y
*1,000V maximum in fixtures and signs
Twister® Al/Cu Wire Connectors
• Onlyaluminum-to-coppertwist-onconnectorspecificallydesignedtoguaranteeasecure
connectionwhilepreventingaluminumcorrosion
• Speciallyformulatedcorrosion-resistantcompoundpenetratescorrosionbuild-upon
aluminumconductorsforincreasedconductivityandcoolerconnections
• Compact,one-piecedesignfeaturesribbedcap,sweptwingsandhexagonalheadforeasy
installationbyhandorwithstandardnutdriver
• Live-action,square-wirespringexpandsandcontractswithaluminumwire
• Deepskirtprovidesmaximumdielectricstrength
• Tough,UL94V-2flame-retardantshellratedat105°C(221°F)
• ComplieswithN.E.C.Section#110-14(b)foraluminum-to-copperconnections;ULListed
to486CandCSACertifiedtoC22.2#188;complieswithFederalSpecificationW-S-610E
• ListedtoUL467forgroundingandbonding
Model Color Wire Combination Ranges Quantity Cat. No.
65
Purple
1 #10 Al solid w/1 or 2 #10 Cu solid
1 #10 Al w/1 or 2 #12 Cu
2 #10 Al solid w/1 #12 Cu
1 #10 Al w/1 or 2 #14 Cu
2 #10 Al solid w/1 #14 Cu
2 #12 Al solid w/1 #10 Cu
1 #12 Al solid w/1 or 2 #10 Cu
1 #12 Al stranded w/1 or 2 #10 Cu solid
1 #12 Al w/1 or 2 #12 Cu
2 #12 Al solid w/1 #12 Cu
1 #12 Al w/1 or 2 #14 Cu
2 #12 Al solid w/1 #14 Cu
1 #10 Al w/1 or 2 #18 Cu
2 #10 Al solid w/1 #18 Cu
1 #12 Al w/1 or 2 #16 Cu
2 #12 Al solid w/1 #16 Cu
1 #10 Al w/1 or 2 #16 Cu
2 #10 Al solid w/1 #16 Cu
1 #12 Al w/1 or 2 #18 Cu
2 #12 Al solid w/1 #18 Cu
Card of 2 30-065
Card of 10 30-765
Card of 25 30-165
Box of 100 30-265
Carton of 1,000 30-365
600V maximum building wire; 1,000V signs or light fixtures Wire Connector
also listed as
grounding equipment
WARNING:
1. One time use only. Do not reuse connector.
2. Do not use on aluminum to aluminum wire combinations.
3. Wiring must comply with all applicable electrical codes.
4. Contact IDEAL or visit IDEAL website for a complete list of UL Listed wire combinations.
Wire TerminaTion
A-7
Wire ConneCTors
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
Utility Wire Connectors Spin-Twist® Wire Connector
Socket
Twist-a-Nut™ Pro
Electrician’s Screwdrivers
7-in-1 Twist-a-Nut™
Screwdriver
9-in-1 Ratch-a-Nut™
Screwdriver
Nutmaster™ Nutdriver
21-in-1 Twist-a-Nut™
Screwdriver
• SpeedsinstallationofTwister®Wire
Connectors
• Nickel/chromeplatedtoresist
 rustandcorrosion
• Cushionedrubbergrip
• ConvenientWire-Nut®Wrenchin
 endofhandle
• Wire-loopingholeinhandle
• Vapor-blastedtippreventsplate
 chipping
• Tough,chromevanadiumsteel
 shank
• Precisiongroundtipprovidessecure
 fitinscrewslot
• Facilitatesinstallationofconnectors
• UniversalWire-Nut®WireConnector
Wrenchinhandle
• Acceptsmosttwist-onconnectors
• Ratchetingwireconnectorwrench
 speedsinstallationofwire
connectors
• Premiumscrewdriverratchet
 mechanismcanhandlehigh
torquewithoutfatigue
• WireConnectorwrenchprevents
 fingerfatigueandgetsintight
 spaces
• Premiumscrewdriverratchet
 mechanismcanhandlehightorque
 withoutfailure
• Ergonomic,slip-freecomfortgrip
• Multiplebitstorageunitandwire-
 loopingholeinhandle
• Includes:
 (3)Phillipstips–#1,#2&#3
 (3)Slottedtips–3/16in.,1/4in.&5/16in.
 (2)Squaretips–#1&#2
 (4)Startips–#15,#20,#25&#30
 (4)Hextips–3/32in.,1/8in.,3/16in.&5/32in.
 (3)Nutdrivertips–1/4in.,5/16in.&7/16in.
• SpeedsinstallationofIDEALand
BUCHANANWireConnectors
• Forusewithelectriccordedorcordless
drilldrivers
• 1/4in.chuckfitsmostdrillsordrive
sockets
For Connector Models Cat. No.
341®, 5/16 in. Driver 35-292
342®, 7/16 in. Driver 35-295
Description Cat. No.
#2 x 6 Robertson 30-330
1/4 in. x 4 in. Slotted 30-331
#2 x 4 in. Phillips 30-332
1/4 in. x 6 in. Slotted Cabinet Tip 30-333
For Connector Models Cat. No.
Wire-Nut®, Wing-Nut®, Twister®,
B-CAP® & WingTwist™
Wire Connectors
30-902
Description Cat. No.
7-in-1 Twist-a-Nut™
Screwdriver 35-908
Description Cat. No.
9-in-1 Ratch-a-Nut™
Screwdriver 35-988
Description Cat. No.
21-in-1 Twist-a-Nut™
Screwdriver 35-688
Model Color Electrical Rating Wire Style Line Side Ballast Side Quantity Cat. No.
102
2-wire
Orange 6 Amps/600 Volts Max.
Solid: #12 - #18
Stranded: #12 – #14 (19 str.)
Stranded Tin-Bonded: #12 – #14 (19 str.)
#16 (26 str.)
#18 (16 str.)
Card of 25 30-372
Jar of 75 30-382J
Jar of 150 30-352J
Box of 1,000 30-102
103
3-Wire
Orange
6 Amps/600 Volts Max.
Solid
Stranded
Stranded Tin Bonded
#12 – #18
#18 Card of 20 30-383X
#12 – #14 (19 str.) None Jar of 50 30-383XJ
#12 – #14 (19 str.)
#16 (26 str.)
#18 (16 str.)
#18 (16 str.) Jar of 100 30-353XJ
Box of 1,000 30-103X
182
2-wire
Orange
3 Amps 120V
1.3 Amps 277V
1 Amps 347V
0.75 Amps 480V
0.60 Amps 600V
Solid #18
Box of 100 30-082
Box of 2,500 30-682
Box of 1,000
w/6” leads 30-682L
183
3-Wire
Box of 100 30-083
Box of 2,500 30-683
1,000V maximum fixtures and signs.
A-8
Wire ConneCTors
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Luminaire Disconnects
In-Line Wire Connectors
®
The PowerPlug® allows
safe disconnect of hot
and neutral ballast
wiring.
FAST FACT:
Perfect for lengthening short
wires, the SpliceLine® is
2X faster than traditional
butt-splices
• MeetsnewNECandCECcodechangesfornon-residentialuorescentluminaires
• PerfectforOEMnewlightinginstallationsorretrotlightingapplications
• MeetsULandCSAnger-probesafetyrequirements
• Allowssafedisconnectofhotandneutralballastwiring
PowerPlug® Selection Chart
Application New Installations Retrofits
For 1-ballast fixtures 102 102, 182
For 2-ballast, dimming and switching fixtures 103 103, 183 Luminaire Disconnect
3HME
TheSpliceLine®isacrimp-free,push-inwireconnectorthatinstallsinhalfthetimeofa
traditionalbuttsplice.Perfectforlengtheningashortwireinabox,forpre-faboperationorfor
surfaceracewaywiring.SpliceLine®acceptssolidandstrandedwire,isULListedandismade
intheU.S.A.
• Crimp-free,push-inbuttsplice
• Easilypassesthrough1/2in.knockouts
• End-to-endconnectionidealforpre-faboperations
• Transparentpolycarbonatewindowforvisualinspectionofconnection
• Widewirerangeof:12–20AWGsolid&12–16AWGstranded
Model Color Rating Wire Range Quantity Cat. No.
42
Orange 600V/20A
105°C
Solid: #12 – #20
Stranded: #12 – #16 (19 str.)
Stranded Tin-Bonded: #14 – #18 (19 str.)
Bag of 10 30-1742
Box of 100 30-1042
Jar of 300 30-1042J
Box of 2,500 30-1642
Wire TerminaTion
®
Based on 2011 data available from Epicor/Vista.
A-9
Wire ConneCTors
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
Luminaire Disconnects In-Sure™ Push-In Wire Connectors
In-Line Wire Connectors
The In-Sure™ Push-In has
low insertion force for fast,
easy connections. Great for
pre-fab wiring.
•
No-twistconnectionreducesrepetitivemotionfatigue
•
Lowinsertionforceforfastandeasyconnections
•
Compactsizemakesinstallationeasy
•
Clearshellgivesvisualvericationofconnection
•
ULListedto486CandCSACertiedtoC22.2#188
•
UL467Listedforgroundingandbondingapplications
•
Tough,UL94V-2flame-retardantshellratedat105°C(221°F)
Specifications
Model 32
Red 2-Port
Model 33 Orange
3-Port
Model 34 Yellow
4-Port
Model 87 Gray
5-Port
Model 88 Blue
6-Port Stacked
Model 90 Black
8-Port
Model 39 Blue
3-Port
Solid #20 - #12 #20 - #12 #14 - #10
Stranded #16 - #12 (< 19 Strand)
#18 (7 Strand)
#16 - #14 (< 19 Strand)
#18 (< 7 Strand)
#12 - #10
(
<
19 Strand)
Stranded (Tin Bonded) #18 - #14 (< 19 Strand)
#14 - #12 (< 19 Strand)
#16 (< 26 Strand)
#18 (< 16 Strand)
#14 - #10
(
<
19 Strand)
Ordering Information
Length Width Height
Model Color Ports In. mm In. mm in. mm Quantity Cat. No.
32
Red 2 0.78 19.81 0.52 13.21 0.38 9.65
Box of 100 30-1032
Jar of 300 30-1032J
Box of 5,000 30-1632
33
Orange 3 0.78 19.81 0.69 17.53 0.38 9.65
Box of 100 30-1033
Jar of 250 30-1033J
Box of 5,000 30-1633
34
Yellow 4 0.78 19.81 0.82 20.83 0.38 9.65
Box of 100 30-1034
Jar of 200 30-1034J
Box of 5,000 30-1634
87
Gray 5 .355 9.02 .907 23.03 .729 18.52
Jar of 150 30-087J
Box of 1,000 30-187
Box of 3,000 30-687
88
Blue 6 Stacked .607 15.42 .603 15.32 .729 18.52
Jar of 100 30-088J
Box of 1,000 30-188
Box of 2,500 30-688
90
Black 8 .355 9.02 1.38 35.03 .717 18.21
Jar of 100 30-090J
Box of 1,000 30-190
Box of 2,000 30-690
39
Blue 3 0.78 19.81 .086 21.84 0.45 11.43
Box of 50
30-1039
Jar of 150
30-1039J
Box of 2,500
30-1639
COPPER TO COPPER ONLY. Do not use on aluminum. Temperature rating: 105°C (221°F) maximum. 600V maximum building wire, 1000V maximum signs or lighting fixtures
Based on 2011 data available from Epicor/Vista.
A-10
GroUndinG aCCessories
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Wire TerminaTion
Grounding Accessories
•
Solidandstrandedpigtailleadwiresareconvenientfordevicegroundingapplications
•
Groundingscrewsofferauniquethread-forming,hole-findingfeaturepluscombination
hex,Phillips,slottedandRobertsonhead
• Safe,fastandefficientforcost-effectivegroundingjobs
• EnsurescompliancewithArticle250oftheNationalElectricalCode
Non-Grounding Pigtails
• 8in.12AWGStrandedPigtails–WhiteorBlack,#10Fork&Strippedend
Solid Wire Grounding Tails Quantity/Pkg. Cat. No.
14 AWG solid, 8 in. tail w/loop & ground
screw and stripped end Box of 50 30-3390
12 AWG solid, 6.5" tail w/loop & ground
screw and stripped end Box of 50 30-3404
12 AWG solid, 6.5" tail w/loop & ground
screw and stripped end Bulk Pack of 1,000 30-3402
12 AWG solid, 8 in. tail w/loop & ground
screw and stripped end Box of 50 30-3392
12 AWG solid, 8 in. tail w/loop & ground
screw and stripped end Plastic Box of 100 30-3399
12 AWG solid, 8 in. tail w/loop & ground
screw and stripped end Bulk Pack of 1,000 30-3496
12 AWG solid, 10 in. tail w/loop & ground
screw and stripped end Bag of 50 30-3410
12 AWG solid, 10 in. tail w/loop & ground
screw and stripped end Bulk Pack of 500 30-3394
12 AWG solid, 12 in. tail w/loop & ground
screw and stripped end Box of 50 30-3498
12 AWG solid, 12 in. tail w/loop & ground
screw and stripped end Bulk Pack of 1,000 30-3396
Stranded Wire Grounding Tails Quantity/Pkg. Cat. No.
14 AWG stranded, 8 in. tail w/#10 fork & #10
ring and ground screw Bag of 25 30-3183
12 AWG stranded, 8 in. tail w/#10 fork & #10
ring and ground screw Bag of 25 30-3184
12 AWG stranded, 8 in. tail w/#10 ring &
ground screw and stripped end
Bulk Pack of
1,000 30-3201
12 AWG stranded, 8 in. tail w/#10 fork & #10
ring and ground screw
Bulk pack of 1,000
(bundle of 50) 30-3284
12 AWG stranded, 8 in. tail w/#10 fork & #10
ring and ground screw Plastic box of 50 30-3385
12 AWG stranded, 8 in. tail w/#10 fork &
#10 ring Bulk pack of 1,000 30-3285
12 AWG stranded, 8 in. tail w/#10 fork and
stripped end Bag of 25 30-3480
12 AWG stranded, 8 in. tail w/#10 fork and
stripped end Bulk pack of 1,000 30-3580
Stranded Wire Grounding Tails (cont.) Quantity/Pkg. Cat. No.
12 AWG stranded, 10 in. tail w/#10 fork &
#10 ring and ground screw Box of 50 30-3310
12 AWG stranded, 10 in. tail w/#10 fork &
#10 ring and ground screw Bulk pack of 500 30-3311
12 AWG stranded, 12 in. tail w/#10 fork &
#10 ring and ground screw Box of 50 30-3412
12 AWG stranded, 12 in. tail w/#10 fork &
#10 ring and ground screw Bulk pack of 1,000 30-3413
Combo Tails Quantity/Pkg. Cat. No.
2-wire combo: 12 AWG solid tail, one stripped
end, one end w/ground screw; joined to 12
AWG stranded tail at a ring terminal, w/fork
terminal on second end
Box of 500 30-3286
2-wire combo: 12 AWG stranded w/#10 ring
& ground screw, one stripped-end tail and one
#10 fork tail
Bag of 25 30-3287
2-wire combo: 12 AWG stranded w/#10 ring
and ground screw and two #10 fork tails Bag of 25 30-3288
3-wire combo: 12 AWG stranded w/#10 ring
& ground screw, one stripped-end tail and two
#10 fork tails
Bag of 25 30-3289
Miscellaneous Grounding Products Quantity/Pkg. Cat. No.
Ground screw, thread-forming, hole-finding,
combination hex, Phillips, slotted and
Robertson tip
Jar of 100 30-3594
Card of 50 30-3194
Non-Grounding Stranded Wire
Pigtails Quantity/Pkg. Cat. No.
12 AWG stranded, 8 in. tail w/#10 fork and
stripped end, white Bag of 25 30-3470
12 AWG stranded, 8 in. tail w/#10 fork and
stripped end, white
Bulk pack of
1,000 30-3570
12 AWG stranded, 8 in. tail w/#10 fork and
stripped end, black Bag of 25 30-3471
12 AWG stranded, 8 in. tail w/#10 fork and
stripped end, black Bulk pack of 1,000 30-3571
Stranded Wire Solid Wire Pigtail Wire
Connectors
Grounding
Screws
A-11
CrimP TerminaLs
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
Crimp Terminals - Rings, Forks, Disconnects and Splices
Vinyl Insulated Ring Terminals
Non-Insulated Ring
Terminals
•
Buttedseam-constructionpreventssplittingunder
maximumpressure
•
Internalbarrelserrationsgripwirestightlytoresistpull-out
andreduceelectricalresistance
•
Tin-platedbrassconstructionforcorrosionresistance
•
Shoulderedbarrelinsulationquicklypositionsterminalfor
propercrimping
•
Expandedinsulationentryaccomodatesawide
varietyofinsulationdiametersandprovidesadditional
insulationsupport
•
Color-codedinsulationandwirerangestampedon
terminalforeasyidentification
•
Seeproductpackagingforrecommendedcrimptools
Wire Range
Combination
Stud Size
In.
Max. Wire
Ins. Dia. In. Qty. Cat. No. Qty. Cat. No.
22 – 18 AWG
(0,5–1,0mm2)
6 (3.7mm)
0.157
(4.0mm)
25 83-2121
8 (4.3mm) 25 83-2131
10 (5.3mm) 25 83-2141
1/4 (6.4mm) 25 83-2151
16 – 14 AWG
(1,5–2,5mm2)
6 (3.7mm)
0.177
(4.5mm)
25 83-2221
8 (4.3mm) 25 83-2231
10 (5.3mm) 25 83-2241 1,000 84-2241
1/4 (6.4mm) 25 83-2251
12 – 10 AWG
(4,0–6,0mm2)
8 (4.3mm)
0.248
(6.3mm)
25 83-2331
10 (5.3mm) 25 83-2341 1,000 84-2341
1/4 (6.4mm) 25 83-2351
5/16 (8.4mm) 25 83-2361
3/8 (10.5mm) 25 83-2371
75° C/600 Volts max.
Wire Range Stud Size
In. Qty. Cat. No. Qty. Cat. No.
22 – 18 AWG
(0,5-1,0mm2)
8 (4.3mm) 25 83-0131
10 (5.3mm) 25 83-0141
16 – 14 AWG
(1,5-2,5mm2)
6 (3.7mm) 25 83-0221
8 (4.3mm) 25 83-0231
10 (5.3mm) 25 83-0241 1,000 84-0241
12 – 10 AWG
(4,0-6,0mm2)
8 (4.3mm) 25 83-0331
10 (5.3mm) 25 83-0341 1,000 84-0341
1/4 (6.4mm) 25 83-0351
8 AWG
(8,0mm2)
10 (5.3mm) 25 83-0421
1/4 (6.4mm) 25 83-0431
5/16 (8.4mm) 25 83-0441
3/8 (10.5mm) 25 83-0451
6 AWG
(14,0mm2)
10 (5.3mm) 20 83-0511
1/4 (6.4mm) 20 83-0521
5/16 (8.4mm) 20 83-0531
3/8 (10.5mm) 20 83-0541
4 AWG
(22,0mm2)
1/4 (6.4mm) 20 83-0611
5/16 (8.4mm) 20 83-0621
3/8 (10.5mm) 20 83-0631
105°C/600 Volts max.
*Plus or minus .020 in.
**Plus or minus .51mm
Vinyl Insulated Spade Terminals
Wire Range Stud Size
In.
Max. Wire
Ins. Dia.
In.
Qty. Cat. No. Qty. Cat. No.
22 – 18 AWG
(0,5-1,0mm2)6 (3.7mm)
8 (4.3mm)
10 (5.3mm)
0.157
(4.0mm)
25 83-7111 1,000 84-7111
25 83-7121
25 83-7131
16 – 14 AWG
(1,5-2,5mm2)6 (3.7mm)
0.177
(4.5mm)
25 83-7151
8 (4.3mm) 25 83-7161 1,000 84-7161
10 (5.3mm) 25 83-7171 1,000 84-7171
12 – 10 AWG
(4,0-6,0mm2)6 (3.7mm)
8 (4.3mm)
10 (5.3mm)
1/4 (6.4mm)
0.248
(6.3mm)
25 83-7201
25 83-7211
25 83-7221 500 84-7221
25 83-7231
75° C/600 Volts max.
Vinyl Insulated Snap Spade
Terminals
Wire Range Stud Size
In.
Max. Wire
Ins. Dia.
In.
Qty. Cat. No. Qty. Cat. No.
22 – 18 AWG
(0,5-1,0mm2)6 (3.7mm)
0.134
(4.0mm)
25 83-7011
8 (4.3mm) 25 83-7021
10 (5.3mm) 25 83-7031
16 – 14 AWG
(1,5-2,5mm2)6 (3.7mm)
0.161
(4.5mm)
25 83-7051
8 (4.3mm) 25 83-7061
10 (5.3mm) 25 83-7071
12 – 10 AWG
(4,0-6,0mm2)8 (4.3mm)
0.248
(6.3mm)
25 83-7081
10 (5.3mm) 25 83-7091
1/4 (6.4mm) 25 83-7101
75° C/600 Volts max.
774A Listed
Pressure Wire Connector
Cu
only
A-12
CrimP TerminaLs
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Vinyl Insulated Multi-Stack
Disconnects
Vinyl Insulated Female DisconnectsNon-Insulated Spade
Terminals
Wire Range Stud Size
In. Qty. Cat. No. Qty. Cat. No.
22 – 18 AWG
(0,5-1,0mm2)
6 (3.7mm) 25 83-6111
8 (4.3mm) 25 83-6121
10 (5.3mm) 25 83-6131
16 – 14 AWG
(1,5-2,5mm2)
8 (4.3mm) 25 83-6161
10 (5.3mm) 25 83-6171 1,000 84-6171
12 – 10 AWG
(4,0-6,0mm2)
8 (4.3mm) 25 83-6211
10 (5.3mm) 25 83-6221
1/4 (6.4mm) 25 83-6231
105° C/600 Volts max.
Wire Range Tab Size
In.
Max. Wire
Ins. Dia.
In.
Qty. Cat. No.
22 – 18 AWG
(0,5-1,0mm2)
.250 x .032
(6.35mm x 0.8mm)
0.15
(3.8mm) 25 83-9611
16 – 14 AWG
(1,5-2,5mm2)
.250 x .032
(6.35mm x 0.8mm)
0.185
(4.7mm) 25 83-9621
12 – 10 AWG
(4,0-6,0mm2)
.250 x .032
(6.35mm x 0.8mm)
0.244
(6.2mm) 25 83-9631
75° C/300 Volts max.
Wire Range Tab Size
In.
Max. Wire
Ins. Dia.
In.
Qty. Cat. No. Qty. Cat. No.
22 – 18 AWG
(0,5-1,0mm2)
.110 x .020
(2.8mm x 0.5mm)
0.150 (3.8mm) 25 83-9511
.187 x .020
(4.75mm x 0.5mm)
0.150 (3.8mm) 25 83-9541
.250 x .032
(6.35mm x 0.8mm)
0.150 (3.8mm) 25 83-9571
16 – 14 AWG
(1,5-2,5mm2)
.110 x .020
(2.8mm x 0.5mm)
0.185 (4.7mm) 25 83-9521
.187 x .020
(4.75mm x 0.5mm)
0.185 (4.7mm) 25 83-9551
.250 x .032
(6.35mm x 0.8mm)
0.185 (4.7mm) 25 83-9581 500 84-9581
14 – 12 AWG
(2,5-4,0mm2)
.250 x .032
(6.35mm x 0.8mm)
0.244 (6.2mm) 25 83-9591
12 – 10 AWG
(4,0-6,0mm2)
.250 x .032
(6.35mm x 0.8mm)
0.244 (6.2mm) 25 83-9601
75° C/300 Volts max.
Vinyl Insulated Male Disconnects
Wire Range Tab Size
In.
Max. Wire
Ins. Dia.
In.
Qty. Cat. No.
22 – 18 AWG
(0,5-1,0mm2)
.250 x .032
(6.35mm x 0.8mm)
0.150
(3.8mm) 25 83-9971
16 – 14 AWG
(1,5-2,5mm2)
.250 x .032
(6.35mm x 0.8mm)
0.185
(4.7mm) 25 83-9981
12 – 10 AWG
(4,0-6,0mm2)
.250 x .032
(6.35mm x 0.8mm)
0.244
(6.2mm) 25 83-9991
75° C/300 Volts max.
Wire TerminaTion
Non-Insulated Female
Disconnects*
Wire Range (AWG) Stud Size
(In.) Qty. Cat. No.
22 – 18 AWG (0,5-1,0mm2).110 x .020 (2.8mm x 0.5mm) 25 83-9411
16 – 14 AWG (1,5-2,5mm2).110 x .020 (2.8mm x 0.5mm) 25 83-9421
22 – 18 AWG (0,5-1,0mm2).187 x .020 (4.75mm x 0.5mm) 25 83-9441
16 – 14 AWG (0,5-1,0mm2).187 x .020 (4.75mm x 0.5mm) 25 83-9451
22 – 18 AWG (0,5-1,0mm2).250 x .032 (6.35mm x 0.8mm) 25 83-9471
16 – 14 AWG (1,5-2,5mm2).250 x .032 (6.35mm x 0.8mm) 25 83-9481
12 – 10 AWG (4,0-6,0mm2).250 x .032 (6.35mm x 0.8mm) 25 83-9501
105° C/300 Volts max.
Nylon Fully-Insulated Male
Disconnects
Wire Range Tab Size
In.
Max. Wire
Ins. Dia.
In.
Qty. Cat. No.
22 – 18 AWG
(0,5-1,0mm2)
.250 x .032
(6.35mm x 0.8mm)
0.150
(3.8mm) 25 83-9911
16 – 14 AWG
(1,5-2,5mm2)
.250 x .032
(6.35mm x 0.8mm)
0.185
(4.7mm) 25 83-9921
12 – 10 AWG
(4,0-6,0mm2)
.250 x .032
(6.35mm x 0.8mm)
0.244
(6.2mm) 25 83-9931
105° C/300 Volts max.
774A Listed
Pressure Wire Connector
Cu
only
Wire Range Max. Wire Ins.
Dia. In. Quantity Cat. No.
22 – 18 AWG
(0,5-1,0mm2)0.150 (3.8mm) 25 83-8001
16 – 14 AWG
(1,5-2,5mm2)0.185 (4.7mm) 25 83-8011
75° C/300 Volts max.
Vinyl Insulated Bullet Disconnects
*Not UL Listed
A-13
disConneCTs
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
Nylon Fully-Insulated Female
Disconnects
Wire Range Tab Size
In.
Max. Wire
Ins. Dia.
In.
Qty. Cat. No. Qty. Cat. No.
22 – 18 AWG
(0,5-1,0mm2).250 x .032
(6.35mm x 0.8mm)
0.15
(3.8mm) 25 83-9771 1,000 84-9771
16 – 14 AWG
(1,5-2,5mm2).250 x .032
(6.35mm x 0.8mm)
0.185
(4.7mm) 25 83-9781 1,000 84-9781
12 – 10 AWG
(4,0-6,0mm2).250 x .032
(6.35mm x 0.8mm)
0.244
(6.2mm) 25 83-9791 500 84-9791
105° C/300 Volts max.
Non-Insulated Flag Female
Disconnect*
Disconnect Adapter -
Male to Female (2-1)*
Vinyl Fully-Insulated Receptacle
Disconnects
Wire Range Max. Wire Ins.
Dia. In. Quantity Cat. No.
22 – 18 AWG
(0,5-1,0mm2)0.150 (3.8mm) 25 83-8101
16 – 14 AWG
(1,5-2,5mm2)0.185 (4.7mm) 25 83-8111
75° C/300 Volts max.
Wire Range Tab Size
In. Quantity Cat. No.
16 – 14 AWG
(1,5-2,5mm2)
.250 x .032
(6.35 x 0.8mm) 25 83-9401
105° C/300 Volts max.
Tab Size (In.) Quantity Cat. No.
.250 x .032
(6.35mm x 0.8mm) 25 83-9801
105° C/300 Volts max.
Non-Insulated Butt Splices*
Non-Insulated Parallel Splices*
Wire Range Qty. Cat. No. Qty. Cat. No.
22 – 18 AWG (0,5-1,0mm2) 25 83-9001
16 – 14 AWG (1,5-2,5mm2) 25 83-9011 1,000 84-9011
12 – 10 (4,0-6,0mm2) 25 83-9021 500 84-9021
8 (8,0mm2) 25 83-9031 250 84-9031
6 (14,0mm2) 20 83-9041
4 (22,0mm2) 20 83-9051
105° C/600 Volts max.
Wire Range Qty. Cat. No. Qty. Cat. No.
22 – 18 AWG (0,5-1,0mm2) 25 83-9071
16 – 14 AWG (1,5-2,5mm2) 25 83-9081 1,000 84-9081
12 – 10 (4,0-6,0mm2) 25 83-9091 1,000 84-9091
105° C/600 Volts max.
Wire Range Color Quantity Cat. No.
22 – 18 AWG
(0,5-1,0mm2)Red 25 83-3261
16 – 14 AWG
(1,5-2,5mm2)Blue 25 83-3271
12 – 10
(4,0-6,0mm2)Yellow 25 83-3281
75° C/600 Volts max.
Wire Range Max. Wire Ins.
Dia. In. Qty. Cat. No.
22 – 18 AWG
(0,5-1,0mm2).157 (4.0mm) 1,000 83-9351
16 – 14 AWG
(1,5-2,5mm2).177 (4.5mm) 1,000 83-9361
12 – 10
(4,0-6,0mm2).248 (6.3mm) 500 83-9371
75° C/600 Volts max.
Wire Range
Max. Wire
Ins. Dia.
In.
Qty. Cat.
No. Qty. Cat. No.
22 – 18 AWG
(0,5-1,0mm2).157
(4.0mm) 25 83-9281 1,000 84-9281
16 – 14 AWG
(1,5-2,5mm2).177
(4.5mm) 25 83-9291 1,000 84-9291
12 – 10
(4,0-6,0mm2).248
(6.3mm) 25 83-9301 500 84-9301
75° C/600 Volts max.
Vinyl Insulated Butt Splices
Vinyl Insulated Parallel Splices
Tap Splice Connectors
774A Listed
Pressure Wire Connector
Cu
only
*Not UL Listed
A-14
TerminaL sTriPs
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Wire TerminaTion
Terminal Strips
•
Heavy-duty,corrosion-resistantscrews,surfaceplatesand
optionalhardware
•
Accessoryhardwareprovidesavarietyofterminationoptions
•
Availablecoverhelpspreventcontactwithliveterminals
•
Ruggedpolyesterthermoplasticbase(ULRated94V-0)
•
Operatingtemperatureratedfrom130°C(260°F)to-40°C(-40°F)
•
ULRecognized(E82048)andCSACertied(LR15364)
No. of Poles Center Spacing Wire Range (AWG Cu) Recommended Torque Terminal Screw Size Cat. No.
89-200 Series, 30A/600V UL/CSA (Max. electrical rating 30A/250V when used with optional quick connects)
2
.562 in. (14.28mm) 22 – 10 16 in. - lb. #8-32 Philslot
Zinc-Plated Steel
89-202
389-203
489-204
689-206
889-208
10 89-210
12 89-212
89-300 Series, 30A/300V UL/CSA (Max. electrical rating 15A/125V when used with optional quick connects)
2
.375 in. (9.52mm) 22 – 14 9 in. - lb. #6-32 Philslot
Zinc-Plated Steel
89-302
489-304
689-306
889-308
10 89-310
12 89-312
89-400 Series, 30A/300V UL/CSA
2
.437 in. (11.10mm) 22 – 12 9 in. - lb. #6-32 Philslot
Zinc-Plated Steel
89-402
489-404
689-406
889-408
10 89-410
12 89-412
No. of Poles Center Spacing Wire Range (AWG Cu) Recommended Torque Terminal Screw Size Standard Black
Cat. No.
Shorting Block
Cat. No.
89-500 Series, 60A/600V UL/CSA (Max. electrical rating 60A/600V achieved only when used with #6 AWG copper wire crimped to ring terminal)
4
.625 in. (15.88mm) 22 – 6 20 in. - lb. #10-32 Slotted
Nickle-Plated Brass
89-504 89-505
689-506 89-507
889-508 89-509
12 89-512 89-513
Standard Block
Shorting
Block
A-15
aCCessories
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
For Use with Center Spacing
(In.) Quantity Flat Slip-on Cat.
No.
Over Barrier Slip-on
Cat. No.
Flat 12-Circuit
Cat. No.
Terminal Strip Series
89-200 .562 10 89-229 89-224
100 89-230 — —
89-300 .375 10 89-323 89-324
100 89-330 — —
89-400 .437 10 89-423 89-424
100 89-430 — —
89-500 .625 2 89-525
Covers
Barrier Strips
Jumpers
•
Helpspreventcontactwithlive
terminals
•
Allowsfast,flexiblecircuitchanges
•
Provideseasyconnectionofmultiplecircuits
•
Recessedscrewsandtubularcontactsprovideaddedsafetyandhelppreventshortcircuits
• Tubularcontactsconnectstripped,un-terminatedsolidorstrandedwiredirectlytoeachcontact
•
Integratedwireprotectorspreventtwistingandbreakageofstrandedwireduringconnection
•
Modular12-circuitdesigncanbecutintosmallersections,orstackedend-to-end
•
Ruggednylonconstruction,UL94V2
•
Operatingtemperatureratedto105°C(221°F)
No. of
Circuits
For Use with
89-200 89-300 89-400 89-500
Clear
Cat. No.
Clear
Cat. No.
Clear
Cat. No.
Clear
Cat. No.
289-233 89-334 89-434
489-235 89-335 89-435 89-514
689-236 89-336 89-436 89-516
889-237 — 89-437 89-518
10 89-238 89-338 89-438
12 89-239 89-339 89-439 89-520
Quick Connects
For Use with
Terminal Strip
Series
Tab Size
(Inches) Qty. Flat -None
Cat. No.
Flat - Flat
Cat. No.
89-300 .187 x .020 10 89-314 89-317
89-200 & 89-400 .250 x .031 10 89-414 89-417
Electrical Ratings Wire Range (AWG) No. of Circuits Torque in.- lb. Model No. Cat. No.
20A/300V UL 22 - 12 12 3.5 PA8DS 89-608
10A/400V CSA 20 - 18
30A/300V UL 22 - 10 12 4.4 PA10DS 89-610
20A/400V CSA 18 - 14
35A/300V UL/CUL 22 - 10 12 7.0 PA12DS 89-612
50A/300V UL/CUL 20 - 8 12 12.0 PA14DS 89-614
Model Wire Combination Range Quantity Cat. No.
48
600V*
Min. 2 #22
Max. 1 #14 w/2 #18
1,000 30-245
10,000 30-645
49
600V*
Min. 1 #22 w/1 #18
Max. 1 #12 w/1 #16
1,000 30-249
10,000 30-649
NC-8
600V*
Min. 4 w/#16
Max. 1 #12 w/4 #14
1,000 30-148
5,000 30-648
*1,000V maximum in fixtures and signs.
A-16
CrimP ConneCTors
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Steel Crimp Connectors
Wrap-Cap® Insulators Pre-Insulated Crimp
Connectors
• Designedformakingfast,permanent,pressure-typeconnections
• Long,zinc-platedsteelsleevesmaximizecontactareawithconductors
• Willnotvibrateloosewhensecurelycrimped
• ULListedto486CandCSACertifiedtoC22.2#188;complywithFederalSpecificationW-S-610E.
IDEAL hand crimp tools U.L. listed for Model 410, 411, 412:
30-425, 30-429, 30-430.
Model
Wire Combination
Range Quantity Cat. No.
410
600V
18 thru 10 AWG
Min. 1 #14 & 1 #18
Max. 2 #10 & 2 #14
Box of 100 30-410
Carton of 1,000 30-510
Keg of 10,000 30-610
600V
18 thru 8 AWG
Min. 3 #12
Max. 4 #10
Box of 50 30-411
Carton of 1,000 30-511
600V
18 thru 4 AWG
Min. 1 #14 & 1 #16
Max. 2 #8 & 1 #6
Box of 50 30-412
Carton of 1,000 30-512
• Providehighdielectricandphysical
 protectionforULListed,non-insulated
 pressure-typewireconnectors
• Capandloopdesigneliminatesneed
 fortape
• Uniquedesigncompletelycovers
 splice—insulatesbotharoundand
 betweenwires
• Reusableandeasytoinstall
• ULListedto486CandCSACertifiedfor600Vmaximumbuilding
wiring(1,000Vmaximumforfixturesandsigns);temperaturerated
at75°C(167°F)maximum
Model Description Quantity Cat. No.
415
Insulator Model 410 Connectors can also
be used on Buchanan 2006S & 2011S
Copper Crimps
Box of 50 30-445
Carton of 1,000 30-515
417
Insulator for Model 411 & 412 Connectors
can also be used on Buchanan 2011S
Copper Crimps
Box of 25 30-447
Carton of 1,000 30-517
• Threemodelscoverawiderangeofwirecombinationsfrom
22AWGstrandedthrough8AWGstranded
• Compactdesignfitseasilyintotightlocations
• Flaredskirtprotectsagainstturned–backstrands
• Beveledopeningeaseswireentry
• Tough,UL94V-2flame-retardantshellratedat105°C(221°F)
Wire TerminaTion
A-17
Wire ConneCTors
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
Model
Wire Combination
Range Quantity Cat. No.
10
300V
22 thru 10 AWG
Min. 1 #20 w/1 #22
Max. 2 #14 w/1 #16
Box of 100 30-210
Carton of 1,000 30-310
11
600V
22 thru 10 AWG
Min. 1 #14 w/1 #20
Max. 3 #14 w/2 #18
Box of 100 30-211
Carton of 1,000 30-311
22
600V
20 thru 10 AWG
Min. 1 #16 w/3 #18
Max. 2 #10 w/1 #12
Box of 100 30-222
Carton of 1,000 30-322
Set Screw Wire Connectors Noalox® Anti-Oxidant
Set Screw Holder
• Eliminatesneedforrestrippingwireeachtimeconnectionis
disturbed
• Solidbrasssleevesinthreesizeshandle22through10AWG
wires
• Set-screweasilyandsecurelyappliesmaximumcompressionto
conductorstoensureavibration-resistantsplice
• Permitsfastvisualinspectionofsplice
• Tough,flame-retardantshellratedat150°C(302°F)
• ULListedto486CandCSACertifiedtoC22.2#188;complywith
FederalSpecificationW-S-610E
• Anti-oxidantcompoundimproves
efficiencyandservicelifeof
 aluminumelectrical
 applications
• Suspendedzincparticles
 penetrateandcut
 aluminumoxide
• Providesadditionalinner-
 strandandinner-conductor
 currentpathsforimproved
 conductivityandcooler
 connections
• Carriermaterialexcludesairtominimizefurtheroxidation
• Forusewithpressure-typewireconnectorsincludinglugs,taps,
serviceentrancesandsplitbolts
• Reducesgallingandseizingwhenappliedtoaluminumconduit
joints—promotesgoodgroundcontinuity
• Convenienttoolforholdingand
tighteningset-screwconnectors
• AcceptsIDEALModels11and22
set-screwconnectors
For Connector Models Cat. No.
11 & 22 K-2422
Description Cat. No.
1/2-oz. Tube 30-024
4-oz. Squeeze bottle 30-026
8-oz. Squeeze bottle 30-030
8-oz. Brush cap 30-031
1-gal. Bucket 30-032
5-gal. Bucket 30-040
LISTED
PRODUCT NAME OR NUMBER (as it appears on label)
Noalox® Anti-Oxidant
CATALOG NUMBER
All “30” Series
MANUFACTURER’S NAME
IDEAL INDUSTRIES, INC.
EMERGENCY TELEPHONE NO.
(
815) 895-5181
ADDRESS (Number, Street, City, St ate, Zip Code)
Becker Place, Sycamore, IL 60178
HAZARDOUS MATERIAL DESCRIPTION, P ROPER SHIPPING NAME, HAZARD CLASS, HAZA RD CLASS NO., HAZARD ID NO. (49 CFR 172.101)
None
CHEMICAL DESCRIPTION
Petroleum-Based Mixture
FORMULA
Proprietary
CAS REGISTRY NO.
%W
CHEMICAL NAME(S)*
Listed as a carcinogen
in NTP, I ARC or OSHA
1910(z) (specify)
9003-29-6
<80
Polybutene
No
7440-66-6
20
Zinc Dust
No
112945-52-5
<5
Silicon Dioxide
No
BOILING PO INT
>500
°F °C
oF
FF
SPECIFIC GRAVITY (H
2
O=1)
1.04
PERCENT VOLATILE BY VOLUME (%)
N.E.
SOLUBILITY IN WATER
Moderate
pH =
6.5 - 8.0
PERCENT SOLID BY
WEIGHT (%)
100
APPEARANCE AND ODOR
Gray solid paste, mil d odor
IS MATERIAL: LIQUID SOLID GEL
GAS PASTE
POWDER
FLASH POINT
310 F
method used
C.O.C
FLAMMABLE LIMITS
LEL
UEL
N.E.
N.E.
EXTINGUISHING MEDIA
Use dry chemical, carbon di oxide or foam.
SPECIAL FIRE FIGHTING PROCEDURES
Self-contained respiratory protection should be provided for fire fighters. K eep fire exposed
containers cool with water.
UNUSUAL FIRE AND EXPLOSION HAZARDS
Water or foam may cause a frothi ng reaction. (Water reacts with zinc dust).
1
0
1
Flammability
HMIS Rating
Reactivity
Health
For a Material Safety Data
Sheet on Noalox® and all other
products visit us at
www.idealindustries.com
A-18
Wire ConneCTors
(2) #18 stranded
(1) #14 solid
(1) #18 stranded
(2) #14 solid
(1) #14 solid
(2) #12 stranded
(3) #12 solid
(2) #14 solid
(5) #12 solid
Ourwedge-edgeexpanding
springisspeciallydesignedforfaster
pull-upandquickconnections.
Italsoaccommodatesawide
rangeofwiregauges.
TheB2 B-CAP®WireConnector
istheuniversalconnectorthat
acceptsthewidestrangeofwire
combinations.Plus,theClassic
Fin™ergonomicdesignfitseasily
intightelectricalboxes.
TheBUCHANAN C-24 CrimpTool
hasaniron-cladreputationthat’s
uptoeveryjob,everytime.
Apatentedfour-waycrimpensures
reliableconnections,whilethe
spring-loaded,cam-actuateddesign
fitsawiderangeofconnectors.
Thecomprehensivelineof
BUCHANAN sectional
terminalblocksoffersa
widerangeofblock
configurations,mounting
optionsandcontactstyles
accommodatingwiresizes
from30AWGto250MCM.
Wire TerminaTion
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
(2) #10 stranded
Wire ConneCTors
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM A-19
Wire TerminaTion
•
Fourcolor-codedmodelscoverafullrangeofwiresizesfrom22AWGto6AWG
•
ClassicFinTMdesignprovidessecuregripforextraleverageonmaximumwirecombinations
•
Live-actionspringexpandstoacceptwireshapeandsize–nopre-twistingrequired
•
Square-wirespringthreadsdirectlyontoconductorsforfast,secureconnections
•
Deepskirtprotectsagainstflash-overandturned-backstrandsformaximumdielectric
 protection
•
Easilyremovedforrepeatusageonsamesizeorlargerwirecombinations
•
Tough,UL94V-2flame-retardantshellratedat105oC(221oF)
•
Green-B®designedformakinggroundconnectionsandbondingnon-metallicsheathedcable
•
UL486CListed(Green-B®UL467Listed)andCSA22.2#188Certified;complywithFederal
 Specification-S-610E
B-CAP® Wire Connectors
Wire Connectors
Model Color Wire Combination
Range
Wire Combination
Range (mm) Quantity/Package Cat. No.
B1 Yellow
600V*
22 to 10 AWG
Min. 3 #20
Max. 3 #12
600V*
,34mm2 to 6,0mm2
Min. 3-,5mm2
Max. 3-4,0mm2
Box of 100 B1-1
Jar of 250 B1-250JR
Jar of 500 B1-500JR
Bag of 500 B1-B
Barrel of 25,000 B1-SK
B2 Red
600V*
22 to 8 AWG
Min. 2 #18
Max. 5 #12
600V*
,34mm2 to 10,0mm2
Min. 2-,75mm2
Max. 5-4,0mm2
Box of 100 B2-1
Jar of 350 B2-350JR
Jar of 500 B2-500JR
Bag of 500 B2-B
Barrel of 25,000 B2-SK
B4 Blue-Gray
600V*
14 to 6 AWG
Min. 2 #12
Max. 2 #6
600V*
2,5mm2 to 16,0mm2
Min. 2-4,0mm2
Max. 2-16,0mm2
Box of 25 B4-1
Bag of 250 B4-B
BGR Green
14 to 10 AWG
Min. 2 #14
Max. 5 #12
2,5mm2 to 6,0mm2
Min. 2-2,5mm2
Max. 5-4,0mm2
Box of 50 BGR-1
Bag of 250 BGR-B
*1,000V maximum in fixtures and signs
•
Widered/yellowwirerange;min.2#18tomax.2#8
•
Roundeddial-topprovidesfastfingertipstarts
•
Square-wirespringprovidesquick,secure
connections
•
Comfortableswept-wingdesignwithdeepskirtto
helpprotectover-strippedwires
•
Tough,UL94V-2flame-retardantshellratedat
105°C(221°F)
•
ULListedto486CandCSACertifiedtoC22.2#188;
 complywithFederalSpecificationW-S-610E
*1,000V maximum in fixtures and signs
Model Color
Wire
Combination
Range
Wire
Combination
Range (mm)
Quantity/
Package Cat. No.
BT2™ Red
600V*
18 to 8 AWG
Min. 2 #18
Max. 2 #8
600V*
,75mm2 to 10mm2
Min. 2-,75mm2
Max. 2-10,0mm2
Box of 100 BT2-1
Jar of 500 BT2-500JR
Barrel of
25,000 BT2-SK
A-20
Wire ConneCTors
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Wire TerminaTion
WireTwist™ Wire Connectors
WingTwist™ Wire Connectors
•
Fivecolor-codedmodelscovercommonwireranges
•
Ribbedcapprovidespositivegripforfast,easyinstallation
•
Expanding,square-wirespringcreatessecureconnections
•
Deepskirtprotectsagainstflash-over
•
Tough,UL94V-2flame-retardantshell(105oC/221oF)
•
UL486CListedandCSA22.2#188Certified
•
Fivecolor-codedmodelscovercommonconstruction
 wirerangesandcombinations,includinggrounding
•
Contouredwingdesignprovidesmaximumtorque
•
Expanding,square-wirespringcreatessecure
connections
•
Deepskirtprotectsagainstflash-over
•
Tough,UL94V-2flameretardantshell(105°C/221°F)
•
UL486CListed(WGRUL467Listed)andCSAC22.2
#188Certified
WireTwist™ Wire Connectors
Model Color Wire Combination Range Wire Combination Range (mm) Quantity / Package Cat. No.
WT1 Gray
300V
22 to 14 AWG
Min. 3 #22
Max. 2 #16
300V
,34mm2 to 2,5mm2
Min. 3-,34mm2
Max. 2-1,5mm2
Box of 100 WT1-1
Bag of 500 WT1-B
Barrel of 50,000 WT1-SK
WT2 Blue
300V
22 to 14 AWG
Min. 3 #20
Max. 3 #16
300V
,34mm2 to 2,5mm2
Min. 3-,50mm2
Max. 3-1,5mm2
Box of 100 WT2-1
Bag of 500 WT2-B
Barrel of 50,000 WT2-SK
WT3 Orange
600V*
22 to 14 AWG
Min. 2 #18
Max. 2 #14
600V*
,34mm2 to 2,5mm2
Min. 2-,75mm2
Max. 2-2,5mm2
Box of 100 WT3-1
Bag of 500 WT3-B
Barrel of 50,000 WT3-SK
WT4 Yellow
600V*
22 to 10 AWG
Min. 2 #18
Max. 2 #12
600V*
,75mm2 to 6,0mm2
Min. 2-,75mm2
Max. 2-4,0mm2
Box of 100 WT4-1
Bag of 500 WT4-B
Barrel of 25,000 WT4-SK
WT6 Red
600V*
20 to 8 AWG
Min. 2 #14
Max. 4 #12
600V*
,50mm2 to 10,0mm2
Min. 2-2,5mm2
Max. 4-4,0mm2
Box of 100 WT6-1
Bag of 250 WT6-B
Barrel of 25,000 WT6-SK
WingTwist™ Wire Connectors
Model Color Wire Combination Range Wire Combination Range (mm) Quantity / Package Cat. No.
WT51 Yellow
600V*
18 to 10 AWG
Min. 2 #18
Max. 3 #12
600V*
,75mm2 to 6,0mm2
Min. 2-,75mm2
Max. 3-4,0mm2
Box of 100 WT51-1
Bag of 500 WT51-B
Jar of 500 WT51-500JR
Barrel of 25,000 WT51-SK
WT41 Tan
600V*
22 to 10 AWG
Min. 2 #20
Max. 3 #10 Solid
600V*
,34mm2 to 6,0mm2
Min. 2-0,5mm2
Max. 3-6,0mm2
Box of 100 WT41-1
Bag of 500 WT41-B
Jar of 500 WT41-500JR
Barrel of 25,000 WT41-SK
WT52 Red
600V*
18 to 10 AWG
Min. 2 #14
Max. 5 #12
600V*
,75mm2 to 6,0mm2
Min. 2-2,5mm2
Max. 5-4,0mm2
Box of 100 WT52-1
Bag of 500 WT52-B
Jar of 500 WT52-500JR
Barrel of 25,000 WT52-SK
WT54 Blue
600V*
14 to 6 AWG
Min. 3 #12
Max. 2 #6
600V*
2,5mm2 to 16,0mm2
Min. 3-4,0mm2
Max. 2-16,0mm2
Box of 50 WT54-1
Bag of 100 WT54-B
WGR Green
14 to 10 AWG
Min. 2 #14
Max. 5 #12
2,5mm2 to 6,0mm2
Min. 2-2,5mm2
Max. 5-4,0mm2
Box of 50 WGR-1
Bag of 250 WGR-B
Jar of 500 WGR-500JR
Barrel of 25,000 WGR-SK
*1,000V maximum in fixtures and signs
A-21
TaP ConneCTors
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
WingTwist™ Wire Connectors
B-TAP® Insulation-Piercing Tap Connectors
•
Eliminatessplitboltsandtape
•
Easytwo-minuteinstallationrequiresonlybox/socketwrench
•
Installsonenergizedsystemseliminatingcostlypowershutdowns
•
Self-sealing,grease-filledend-capensuressafe,weather-tightconnection
•
Uniqueturbospacerkeepsconnectorwideopenforquickandeasy
installation
•
Torque-regulatingnutbreaksoffwhenpropertensionisreached
•
Full-lineis600Vdual-rated,194˚F(90˚C)
Conductor Range Voltage Rating
Dimensions (Inches) Socket Size
(Inches)
Torque
(In. Lbs.)
Run Tap A B C No. of Bolts Cat. No.
1/0-8 2-101600V 3.1 1.8 2.2 1/2 80 1 BTC1/0-10
2/0-4 10-142600V 3.1 1.8 2.2 1/2 80 1 BTC2/0-14
4/0-2 4/0-4 600V 4.4 2.4 3.2 1/2 160 1 BTC4/0-2
4/0-3 2-103600V 3.1 1.8 2.2 1/2 125 1 BTC4/0-10
4/0-2 2/0-6 600V 3.5 2.2 2.5 1/2 160 1 BTC4/0-6
250-1 4/0-4 600V 3.5 2.2 2.5 1/2 160 1 BTC250-4
350-1/0 350-1/0 600V 4.5 3 3.9 5/8 330 2 BTC350-1/0
500-2/0 4/0-4 600V 4.5 3 3.9 5/8 330 2 BTC500-4
500-4/0 350-1/0 600V 4.5 3 3.9 5/8 330 2 BTC500-1/0
750-3/0 10-144600V 3.7 2.5 2.2 1/2 80 1 BTC500-14
750-250 500-250 600V 4.7 3.4 4.75 5/8 330 2 BTC750-250
LISTED
A
B
C
1 Tap #2 - #10 Cu solid/stranded; #2 - #10 Al stranded 3 Tap #2 - #10 Cu solid/stranded; #2 - #8 Al stranded
2 Tap #10 - #14 Cu solid/stranded; #10 - #14 Al stranded 4 Tap #10 - #14 Cu solid/stranded; #10 - #12 Al stranded
B-Tap® Wire Range Chart
Wire Stize
Cat. No. 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0 250 300 350 400 500 750
BTC1/0-10 Main: 1/0 - 8
Tap: 2 - 10
BTC2/0-14 Main: 2/0 - 4
Tap: 10 - 14
BTC4/0-12 Main: 4/0 - 2
Tap: 4/0 - 4
BTC4/0-10 Main: 4/0 - 3
Tap: 2 - 10
BTC4/0-6 Main: 4/0 - 2
Tap: 2/0 - 6
BTC250-4 Main: 250 - 1
Tap: 4/0 - 4
BTC350-1/0 Main: 350 - 1/0
Tap: 350 - 1/0
BTC500-4 Main: 500 - 2/0
Tap: 4/0 - 4
BTC500-1/0 Main: 500 - 4/0
Tap: 350 - 1/0
BTC500-14 Main: 750 - 3/0
Tap: 10 - 14
BTC750-250 Main: 750 - 250
Tap: 500 - 250
A-22 WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
sTreeTLiGhT KiTs
Wire TerminaTion
•
Waterproofbreakawayfuseholderforusein:
 –Roadway&streetlighting
 –Parkinglot&arealighting
 –Free-standingelectricvehiclechargingstations
•
ULListedforsubmersibleinstallations
• Brightorangecolorforeaseofvisibility
•
Largeselectionofconfigurations
•
Setscreworcrimpterminationsavailable
TheIDEALSLK®DisconnectFuseKitisawaterproofbreakawaysafetydevicethatde-energizes
roadwaylights,streetlights,parkinglotlights,andotherfreestandingelectricalxturesintheeventofa
knockdown,orwhenthexturesneedmaintenance.Thishelpsprotectrstresponders,bystanders,and
servicepersonnelfrompotentiallylife-threateningelectricalshockhazards.
IDEALworkeddirectlywithroadwayinstallationelectricians,DOTmaintenancecrews,andspecifyingengineers
tondoutwhatfeatureswouldreallymakeadifference.Theresultisanentirelynewproductthatnotonly
performsbetterbutiseasiertoinstallandmorerobustthananyotherdisconnectfusekitonthemarkettoday.
TheSLK®istherstDisconnectFuseKitlistedtoUL’sECIScategoryforspecialpurposeconnectors.Thisnewcategorycontainsa
setofrigoroustestsfromahostofULstandards,includingUL486D,thestandardforsubmersibility.ThismeansthattheSLK®will
standuptothewetconditionsoftenseeninandaroundpolebases,junctionboxesandhandholes.
Inaddition,thebrightorangecoloroftheSLK®makestheproducteasytolocateindarkjunctionboxes,inhandholesorinanight-
timeknockdownsituation,whentheconnectorisoftenburiedamongstdirt,mudanddebris.
• Accepts13/32”x1-1/2”midget-stylefuse(Note:Fusenotincluded)
• WireRange:2-14AWG(Cu&Alrated)
• Ratings:30A,600V,105°C
SLK® Disconnect Fuse Kits
Scan QR Code for
Demo Video!
Large, clear
markings
Ribbed boots
provide superior grip
Fuse stays on de-
energized load side
when separated
High-visibility orange
material (UL 94V-2
flame rated)
Neutral configurations come
with white fuseholder and
dummy fuse
Paired (hot/neutral)
configurations are
keyed to prevent
reverse polarities
A-23
sTreeTLiGhT KiTs
ToDeterminewhichKittoUse:
1. Selectthebasepartnumber,basedoncrimptermination(TABLE1)orsetscrewtermination(TABLE2),numberofwiresonline/
 loadside,andwiresize.
2. Ifnecessary,modifythebasepartnumberaccordingtoneutral,dual,paired,ortap(i.e.,non-breakaway)congurations.Use
 TABLE3forcrimpvariationsandTABLE4forsetscrewvariations.
3. Forexamples,seethebottomofthispage.
Note: For fuseholder-only or combination (set screw line side, crimp load side) applications, please see the second column of the table on the next page.
Examples:
1. An in-line fused breakaway kit with crimp terminations, one 10 AWG wire on the line
side and one 10 AWG wire on the load side is ordered as a 30-C1616.
2. An in-line non-fused (i.e., neutral) breakaway kit with set screw terminations,one
6 AWG wire on the line side and one 10 AWG wire on the load side is ordered as a
30-S1212N.
3. A Y-tap fused breakaway kit with crimp terminations, two 6 AWG wires on the line side
and one 10 AWG wire on the load side is ordered as a 30-C2216.
4. A Dual in-line breakaway (hot/hot ganged together) with crimp terminations, one
10 AWG wire on each line side and one 10 AWG wire on each load side is ordered as a
30-C1616D.
5. A Paired in-line breakaway (hot/neutral ganged together) with set screw terminations,
one 6 AWG wire on each line side and one 10 AWG wire on each load side is ordered
as a 30-S1212P.
Table 1: Crimp
Base Part
numbers
Table 2: Set
Screw Base Part
numbers
Table 3: Crimp Variations Table 4: Set Screw Variations
Load
1 Wire 2 Wire
2 AWG 4 AWG 6 AWG 8 AWG 10 AWG 12 AWG 14 AWG 2 AWG 4 AWG 6 AWG 8 AWG 10 AWG 12 AWG 14 AWG
Line
1 Wire
2 AWG 30-C1212 30-C1212 30-C1216 30-C1216 30-C1216 30-C1216 30-C1216 30-C1222 30-C1222 30-C1226 30-C1226 30-C1226
4 AWG 30-C1212 30-C1216 30-C1216 30-C1216 30-C1216 30-C1216 30-C1222 30-C1222 30-C1226 30-C1226 30-C1226
6 AWG 30-C1616 30-C1616 30-C1616 30-C1616 30-C1616 30-C1622 30-C1622 30-C1626 30-C1626 30-C1626
8 AWG 30-C1616 30-C1616 30-C1616 30-C1616 30-C1622 30-C1626 30-C1626 30-C1626
10 AWG 30-C1616 30-C1616 30-C1616 30-C1626 30-C1626 30-C1626
12 AWG 30-C1616 30-C1616 30-C1626 30-C1626
14 AWG 30-C1616 30-C1626
2 Wire
2 AWG 30-C2012 30-C2012 30-C2016 30-C2016 30-C2016 30-C2016 30-C2016 30-C2022 30-C2022 30-C2026 30-C2026 30-C2026
4 AWG 30-C2012 30-C2016 30-C2016 30-C2016 30-C2016 30-C2016 30-C2022 30-C2022 30-C2026 30-C2026 30-C2026
6 AWG 30-C2216 30-C2216 30-C2216 30-C2216 30-C2216 30-C2222 30-C2222 30-C2226 30-C2226 30-C2226
8 AWG 30-C2216 30-C2216 30-C2216 30-C2216 30-C2222 30-C2226 30-C2226 30-C2226
10 AWG 30-C2616 30-C2616 30-C2616 30-C2626 30-C2626 30-C2626
12 AWG 30-C2616 30-C2616 30-C2626 30-C2626
14 AWG 30-C2616 30-C2626
Load
1 Wire 2 Wire
2 AWG 4 AWG 6 AWG 8 AWG 10 AWG 12 AWG 14 AWG 2 AWG 4 AWG 6 AWG 8 AWG 10 AWG 12 AWG 14 AWG
Line
1 Wire
2 AWG 30-S1212 30-S1212 30-S1212 30-S1212 30-S1212 30-S1212 30-S1212 30-S1222 30-S1222 30-S1222 30-S1222 30-S1222 30-S1222 30-S1222
4 AWG 30-S1212 30-S1212 30-S1212 30-S1212 30-S1212 30-S1212 30-S1222 30-S1222 30-S1222 30-S1222 30-S1222 30-S1222
6 AWG 30-S1212 30-S1212 30-S1212 30-S1212 30-S1212 30-S1222 30-S1222 30-S1222 30-S1222 30-S1222
8 AWG 30-S1212 30-S1212 30-S1212 30-S1212 30-S1222 30-S1222 30-S1222 30-S1222
10 AWG 30-S1212 30-S1212 30-S1212 30-S1222 30-S1222 30-S1222
12 AWG 30-S1212 30-S1212 30-S1222 30-S1222
14 AWG 30-S1212 30-S1222
2 Wire
2 AWG 30-S2212 30-S2212 30-S2212 30-S2212 30-S2212 30-S2212 30-S2212 30-S2222 30-S2222 30-S2222 30-S2222 30-S2222 30-S2222 30-S2222
4 AWG 30-S2212 30-S2212 30-S2212 30-S2212 30-S2212 30-S2212 30-S2222 30-S2222 30-S2222 30-S2222 30-S2222 30-S2222
6 AWG 30-S2212 30-S2212 30-S2212 30-S2212 30-S2212 30-S2222 30-S2222 30-S2222 30-S2222 30-S2222
8 AWG 30-S2212 30-S2212 30-S2212 30-S2212 30-S2222 30-S2222 30-S2222 30-S2222
10 AWG 30-S2212 30-S2212 30-S2212 30-S2222 30-S2222 30-S2222
12 AWG 30-S2212 30-S2212 30-S2222 30-S2222
14 AWG 30-S2212 30-S2222
Base Part
Number (Hot)
Variation (If applicable)
Neutral Dual Paired Non-Breakaway
30-C1212 30-C1212N 30-C1212D 30-C1212P
30-C1216 30-C1216N 30-C1216D 30-C1216P
30-C1616 30-C1616N 30-C1616D 30-C1616P
30-C1222 30-C1222N
30-C1226 30-C1226N
30-C1622 30-C1622N
30-C1626 30-C1626N
30-C2012 30-C2012N 30-C2012T
30-C2016 30-C2016N 30-C2016T
30-C2216 30-C2216N 30-C2216T
30-C2616 30-C2616N 30-C2616T
30-C2022 30-C2022N 30-C2022D 30-C2022P
30-C2026 30-C2026N 30-C2026D 30-C2026P
30-C2222 30-C2222N 30-C2222D 30-C2222P
30-C2226 30-C2226N 30-C2226D 30-C2226P
30-C2626 30-C2626N 30-C2626D 30-C2626P
Base Part
Number
Variation (If applicable)
Neutral Dual Paired Non-Breakaway
30-S1212 30-S1212N 30-S1212D 30-S1212P
30-S1222 30-S1222N
30-S2212 30-S2212N 30-S2212T
30-S2222 30-S2222N 30-S2222D 30-S2222P
Note: For combination 2 wire line (2-14 AWG Set Screw) and 1 wire load
(6-14 AWG Crimp), use 30-B2216.
Ordering Information
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
A-24 WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
sTreeTLiGhT KiTs
Available Part Numbers
Catalog
Number Description
30-S1212 In-Line Breakaway, set screw; fused; 1 wire line side, 2-14 AWG; 1 wire load side, 2-14 AWG
30-S1222 In-Line Breakaway, set screw; fused; 1 wire line side, 2-14 AWG; 2 wire load side, 2-14 AWG
30-S1212N In-Line Breakaway, set screw; non-fused; 1 wire line side, 2-14 AWG; 1 wire load side, 2-14 AWG
30-S1222N In-Line Breakaway, set screw; non-fused; 1 wire line side, 2-14 AWG; 2 wire load side, 2-14 AWG
30-C1212 In-Line Breakaway, crimp; fused; 1 wire line side, 2-4 AWG; 1 wire load side, 2-4 AWG
30-C1216 In-Line Breakaway, crimp; fused; 1 wire line side, 2-4 AWG; 1 wire load side, 6-14 AWG
30-C1616 In-Line Breakaway, crimp; fused; 1 wire line side, 6-14 AWG; 1 wire load side, 6-14 AWG
30-C1222 In-Line Breakaway, crimp; fused; 1 wire line side, 2-4 AWG; 2 wire load side, 6-8 AWG
30-C1226 In-Line Breakaway, crimp; fused; 1 wire line side, 2-4 AWG; 2 wire load side, 10-14 AWG
30-C1622 In-Line Breakaway, crimp; fused; 1 wire line side, 6-14 AWG; 2 wire load side, 6-8 AWG
30-C1626 In-Line Breakaway, crimp; fused; 1 wire line side, 6-14 AWG; 2 wire load side, 10-14 AWG
30-C1212N In-Line Breakaway, crimp; non-fused; 1 wire line side, 2-4 AWG; 1 wire load side, 2-4 AWG
30-C1216N In-Line Breakaway, crimp; non-fused; 1 wire line side, 2-4 AWG; 1 wire load side, 6-14 AWG
30-C1616N In-Line Breakaway, crimp; non-fused; 1 wire line side, 6-14 AWG; 1 wire load side, 6-14 AWG
30-C1222N In-Line Breakaway, crimp; non-fused; 1 wire line side, 2-4 AWG; 2 wire load side, 6-8 AWG
30-C1226N In-Line Breakaway, crimp; non-fused; 1 wire line side, 2-4 AWG; 2 wire load side, 10-14 AWG
30-C1622N In-Line Breakaway, crimp; non-fused; 1 wire line side, 6-14 AWG; 2 wire load side, 6-8 AWG
30-C1626N In-Line Breakaway, crimp; non-fused; 1 wire line side, 6-14 AWG; 2 wire load side, 10-14 AWG
30-S2212 Y-Tap Breakaway, set screw; fused; 2 wire line side, 2-14 AWG; 1 wire load side, 2-14 AWG
30-S2222 Y-Tap Breakaway, set screw; fused; 2 wire line side, 2-14 AWG; 2 wire load side, 2-14 AWG
30-S2212N Y-Tap Breakaway, set screw; non-fused; 2 wire line side, 2-14 AWG; 1 wire load side, 2-14 AWG
30-S2222N Y-Tap Breakaway, set screw; non-fused; 2 wire line side, 2-14 AWG; 2 wire load side, 2-14 AWG
30-C2012 Y-Tap Breakaway, crimp; fused; 2 wire line side, 2-4 AWG; 1 wire load side, 2-4 AWG
30-C2016 Y-Tap Breakaway, crimp; fused; 2 wire line side, 2-4 AWG; 1 wire load side, 6-14 AWG
30-C2216 Y-Tap Breakaway, crimp; fused; 2 wire line side, 6-8 AWG; 1 wire load side, 6-14 AWG
30-C2616 Y-Tap Breakaway, crimp; fused; 2 wire line side, 10-14 AWG; 1 wire load side, 6-14 AWG
30-C2022 Y-Tap Breakaway, crimp; fused; 2 wire line side, 2-4 AWG; 2 wire load side, 6-8 AWG
30-C2026 Y-Tap Breakaway, crimp; fused; 2 wire line side, 2-4 AWG; 2 wire load side, 10-14 AWG
30-C2222 Y-Tap Breakaway, crimp; fused; 2 wire line side, 6-8 AWG; 2 wire load side, 6-8 AWG
30-C2226 Y-Tap Breakaway, crimp; fused; 2 wire line side, 6-8 AWG; 2 wire load side, 10-14 AWG
30-C2626 Y-Tap Breakaway, crimp; fused; 2 wire line side, 10-14 AWG; 2 wire load side, 10-14 AWG
30-C2012N Y-Tap Breakaway, crimp; non-fused; 2 wire line side, 2-4 AWG; 1 wire load side, 2-4 AWG
30-C2016N Y-Tap Breakaway, crimp; non-fused; 2 wire line side, 2-4 AWG; 1 wire load side, 6-14 AWG
30-C2216N Y-Tap Breakaway, crimp; non-fused; 2 wire line side, 6-8 AWG; 1 wire load side, 6-14 AWG
30-C2616N Y-Tap Breakaway, crimp; non-fused; 2 wire line side, 10-14 AWG; 1 wire load side, 6-14 AWG
30-C2022N Y-Tap Breakaway, crimp; non-fused; 2 wire line side, 2-4 AWG; 2 wire load side, 6-8 AWG
30-C2026N Y-Tap Breakaway, crimp; non-fused; 2 wire line side, 2-4 AWG; 2 wire load side, 10-14 AWG
30-C2222N Y-Tap Breakaway, crimp; non-fused; 2 wire line side, 6-8 AWG; 2 wire load side, 6-8 AWG
30-C2226N Y-Tap Breakaway, crimp; non-fused; 2 wire line side, 6-8 AWG; 2 wire load side, 10-14 AWG
30-C2626N Y-Tap Breakaway, crimp; non-fused; 2 wire line side, 10-14 AWG; 2 wire load side, 10-14 AWG
30-S2212T Y-Tap Non-Breakaway, set screw; fused; 2 wire line side, 2-14 AWG; 1 wire load side, 2-14 AWG
30-C2012T Y-Tap Non-Breakaway, crimp; fused; 2 wire line side, 2-4 AWG; 1 wire load side, 2-4 AWG
30-C2016T Y-Tap Non-Breakaway, crimp; fused; 2 wire line side, 2-4 AWG; 1 wire load side, 6-14 AWG
30-C2216T Y-Tap Non-Breakaway, crimp; fused; 2 wire line side, 6-8 AWG; 1 wire load side, 6-14 AWG
30-C2616T Y-Tap Non-Breakaway, crimp; fused; 2 wire line side, 10-14 AWG; 1 wire load side, 6-14 AWG
30-S1212D Dual In-Line Breakaway, set screw; fused; 1 wire line side, 2-14 AWG; 1 wire load side, 2-14 AWG
30-C1212D Dual In-Line Breakaway, crimp; fused; 1 wire line side, 2-4 AWG; 1 wire load side, 2-4 AWG
30-C1216D Dual In-Line Breakaway, crimp; fused; 1 wire line side, 2-4 AWG; 1 wire load side, 6-14 AWG
30-C1616D Dual In-Line Breakaway, crimp; fused; 1 wire line side, 6-14 AWG; 1 wire load side, 6-14 AWG
30-S2222D Dual Y-Tap Breakaway, set screw; fused; 2 wire line side, 2-14 AWG; 2 wire load side, 2-14 AWG
30-C2022D Dual Y-Tap Breakaway, crimp; fused; 2 wire line side, 2-4 AWG; 2 wire load side, 6-8 AWG
30-C2026D Dual Y-Tap Breakaway, crimp; fused; 2 wire line side, 2-4 AWG; 2 wire load side, 10-14 AWG
30-C2222D Dual Y-Tap Breakaway, crimp; fused; 2 wire line side, 6-8 AWG; 2 wire load side, 6-8 AWG
30-C2226D Dual Y-Tap Breakaway, crimp; fused; 2 wire line side, 6-8 AWG; 2 wire load side, 10-14 AWG
30-C2626D Dual Y-Tap Breakaway, crimp; fused; 2 wire line side, 10-14 AWG; 2 wire load side, 10-14 AWG
30-S1212P Paired In-Line Breakaway, set screw; one fused, one non-fused; 1 wire line side, 2-14 AWG;
1 wire load side, 2-14 AWG
30-C1212P Paired In-Line Breakaway, crimp; one fused, one non-fused; 1 wire line side, 2-4 AWG;
1 wire load side, 2-4 AWG
30-C1216P Paired In-Line Breakaway, crimp; one fused, one non-fused; 1 wire line side, 2-4 AWG;
1 wire load side, 6-14 AWG
30-C1616P Paired In-Line Breakaway, crimp; one fused, one non-fused; 1 wire line side, 6-14 AWG;
1 wire load side, 6-14 AWG
Catalog
Number Description
30-S2222P Paired Y-Tap Breakaway, set screw; one fused, one non-fused; 2 wire line side, 2-14 AWG;
2 wire load side, 2-14 AWG
30-C2022P Paired Y-Tap Breakaway, crimp; one fused, one non-fused; 2 wire line side, 2-4 AWG;
2 wire load side, 6-8 AWG
30-C2026P Paired Y-Tap Breakaway, crimp; one fused, one non-fused; 2 wire line side, 2-4 AWG;
2 wire load side, 10-14 AWG
30-C2222P Paired Y-Tap Breakaway, crimp; one fused, one non-fused; 2 wire line side, 6-8 AWG;
2 wire load side, 6-8 AWG
30-C2226P Paired Y-Tap Breakaway, crimp; one fused, one non-fused; 2 wire line side, 6-8 AWG;
2 wire load side, 10-14 AWG
30-C2626P Paired Y-Tap Breakaway, crimp; one fused, one non-fused; 2 wire line side, 10-14 AWG;
2 wire load side, 10-14 AWG
30-HS2 Fuseholder only, non-breakaway, set screw; fused; 1 wire line side, 2-14 AWG;
1 wire load side, 2-14 AWG
30-HC2 Fuseholder only, non-breakaway, crimp; fused; 1 wire line side, 2-4 AWG; 1 wire load side,
6-14 AWG
30-HC6 Fuseholder only, non-breakaway, crimp; fused; 1 wire line side, 6-14 AWG; 1 wire load side,
6-14 AWG
30-B2216 Combination Y-Tap Breakaway, fused: 2 wire line side, set screw, 2-14 AWG; 1 wire load side,
crimp, 6-14 AWG
In-Line Non-Fused
(Neutral)
Onewireline,onewireload
Example Configurations
Onewireline,onewireload
In-Line Fused (Hot)
Y-Tap Fused (Hot)
Twowireline,onewireload
Dual In-Line Fused
(Both Hot)
Onewireline,onewireload
Y-Tap Non-Fused
(Neutral)
Twowireline,onewireload
Paired In-Line Fused
(One Hot, One Neutral)
Onewireline,onewireload
For Poles with Transformer Bases, Standard Bases and Junction Boxes
Configurations Comments
D65 dual in-line for phases and two 84 or 84S kits for taps Recommended
•Two82or82SY-TapKitsforphasesandtaps Cost-effective
•TwoBTS4B-CAP® Twist & Seal Wire Connectors Non-breakaway, small gauge (8 AWG and above).
See Wire Connector section.
Configurations Comments
D65PN dual in-line for phase and neutral and Recommended configuration
Two 84 or 84S kits for tap
•One82or82SY-TapKitforphaseandtapand Cost-effective
one 83 or 83S Y-Tap Kit for neutral and tap
•TwoBTS4B-CAP® Twist and Seal Wire Connectors Non-breakaway, small gauge (8 AWG and above).
See Wire Connector section.
For Lights Mounted to Utility Poles, etc...
•TwoB-Tap® Insulation Piercing Connectors for Recommended configuration, see B-Tap®
phase and/or tap (for insulated conductors only) Insulation Piercing Connectors in this catalog.
A-25
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
sTreeTLiGhT KiTs
Transformer
Transformer
82 or 82S for Phase (fuse)
and
83 or 83S for Neutral (common)
Two 82 or 82S for
Phase (fuse)
or
D65 for Phases (fuse)
and two 84 or 84S
for Taps
End of run
65 Kit for Phase (fuse) and
20 Kit for Neutral (common)
or D65PN Kit
Two 65 or one
D65 to fuse
Tap unnecessary
Two 65 or one D65
to Fuse (Phases)
84 or 84S for Taps
D65PN for Phase
and Neutral
84 or 84S for Tap
Phase
to Phase
Transformer Phase
to Neutral
Phase to Phase
Transformer Phase
to Neutral
End of Run
 Safeandeasyinstallationinfiveminutesorless
 Nospecialequipmentnecessary–requiresonlyaknife,wirestripperand
crimptool
 Uniquewireentryport,cut-offdesignaccommodatesindustry’swidest
rangeofinsulationdiameters
•
Fewerpartsthancompetitivebrandsforbetterwaterproofprotection
 Built-inbreak-awaydesigneliminatesde-energizationofcompletecircuits
 Safelyseparatesuponimpactwithoutbreakingwires–eliminatespotential
dangerandelectricalshock(breakawaymodels)
 Unique2-in-1one-piececrimpbarrelaccommodatesindustry’swidest
 rangeofconductors(breakawaymodels)
 Spring-loadedcontactscompensateforthermalexpansiontomaintain
 integrityofwaterproofconnection(breakawaymodels)
Underground Feed Phase to Neutral
Underground Feed Phase to Phase
Application
Guide
Examples of Several
Kit Configurations
Overhead Feed
Waterproof Breakaway Streetlight
Connector & Splice Insulating Kits
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
A-26 WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Wire TerminaTion
sTreeTLiGhT KiTs
Breakaway In-Line Kits
Application Electrical Ordering Code
Rating
Crimp Splice 150 Amp 84 –
Tap & Run 600 Volt
Set Screw Splice 70 Amp 84S –
Tap & Run 600 Volt
Application Electrical Ordering Code
Rating
In-Line Neutral 30 Amp 20 –
Non-Fused Breakaway 600 Volt
In-Line Phase 1/10-30 Amp 65 –
Fused Breakaway 600 Volt
Dual In-Line Phase 1/10-30 Amp D65 –
Fused Breakaway 600 Volt
Dual In-Line Phase & 1/10-30 Amp Phase D65PN –
Neutral Fused 30 Amp Neutral
Breakaway 600 Volt
Application Electrical Ordering Code
Rating
Crimped Phase 1/10-30 Amp 82 –
Fused Tap & Run 600 Volt
Crimp Neutral 125 Amp Line 83 –
Non-Fused Tap & Run 30 Amp Load
600 Volt
Set Screw Phase 1/10-30 Amp 82S –
Fused Tap & Run 600 Volt
Set Screw Neutral 70 Amp Line 83S –
Non-Fused Tap & Run 30 Amp Load
600 Volt
Breakaway Y-Tap Kits
Y-Splice Kits
MODEL
Ordering Information
Use the following chart and table to determine the correct part number by choosing model, line side, and
load side ordering codes from the shaded columns. See example below, right (Page A-27 ).
82TM Kit
83TM Kit
82STM Kit 83STM Kit
84STM Kit
65TM Kit
D65TM Kit
D65PNTM Kit
20TM Kit
Excerpts of the 1996 NEC Tables 5 & 5A
Dimensions of Insulated Conductors and Fixture Wires
Approx. Diameter in Inches for Insulation Types:
Approx. Diameter in Inches for
Size RHH, THHW THHN XHH
Compact AL with Insulation Types:
(AWG) RH RHW-2,RHW TW THW,THW-2 THWN,THWN-2 XHHW,XHHW-2 THW,THHW THHN XHHW
14
12
10
8
6
4
3
2
1
1/0
0.163
0.182
0.236
0.326
0.364
0.412
0.440
0.472
0.582
0.622
0.193
0.212
0.236
0.326
0.364
0.412
0.440
0.472
0.582
0.622
0.133
0.152
0.176
0.236
0.304
0.352
0.380
0.412
0.492
0.532
0.163
0.182
0.206
0.266
0.304
0.352
0.380
0.412
0.492
0.532
0.111
0.130
0.164
0.216
0.254
0.324
0.352
0.384
0.446
0.486
0.133
0.152
0.176
0.236
0.274
0.322
0.350
0.382
0.442
0.482
0.255
0.290
0.335
0.390
0.465
0.500
0.240
0.305
0.360
0.415
0.450
0.224
0.260
0.305
0.360
0.415
0.450
Line side
Double Ridge
Line side
housing (receptacle)
Line side
housing (receptacle)
Line side
housing (receptacle)
Line side
housing (receptacle)
Line side
housing (receptacle) Y Insert
Assembly
Y Insert
Assembly
Y Insert
Assembly
Pin
Line side
housing (receptacle)
Crimp-on
flag
terminals
Crimp-on
flag
terminals
Crimp-on
ring
terminals
Crimp-on
flag
terminals
Nut
and
Bolt
Nut
and
Bolt
Nut
and
Bolt
Line side
insert Load side
housing
(Plug)
Load side
housing
(Plug)
Load side
housing
(Plug)
Load side
housing
(Plug)
Load side
housing
(Plug)
Line Side Insert
Terminal
Block
Line side
insert Load side
housing
(Plug)
Line side
Double Ridge
Line side
Double Ridge
Fuse
(not included)
White Band
White Band
Pin Contact
Load side
Single Ridge
Load side
Single Ridge
Load side
Single Ridge
Fuse
(not included)
Fuse
(not included)
Load side
Single Ridge
White Band
(Neutral Side)
White Band (Neutral Side)
Metal Pin
Contact
Line side
Double Ridge
84TM Kit
A-27
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
Wire TerminaTion
sTreeTLiGhT KiTs
Insulation Stranded* Ordering
Diameter Range Conductor Type Code
(Inches) Size (AWG) (
CHOOSE 1)
12-6 Copper Crimp U –
12-6 Aluminum Crimp UA –
.120-.430
4 or 2 Copper Crimp LC –
4 or 2 Aluminum Crimp LA –
Insulation Ordering Stranded* Ordering
Diameter Range Code Conductor Type Code
(Inches) (
CHOOSE 1)
Size (AWG) (
CHOOSE 1)
10 Copper Crimp 6 –
.155-.430 ADB 8 Copper Crimp 4 –
6 Copper Crimp 3 –
4 Copper Crimp 2 –
.420-.785 EAFB 2 Copper Crimp 1 –
1 Copper Crimp 0 –
1/0 Copper Crimp 10 –
.155-.430 ADB 10 1 –
8 1 –
6 Terminal Block 1 –
4 with Set Screws 1 –
2 Copper or Alum. 1 –
.420-.785 EAFB 1 Conductors 10 –
1/0 10 –
LINE SIDE LOAD SIDE
Insulation Equivalent Conductor Size Ordering
Diameter Range Conductor Size (AWG) Type Code
(Inches) (See Table) (
CHOOSE 1)
10 Copper Crimp 6
8 Copper Crimp 4
.120 -.430 1 6 Copper Crimp 3
4 Copper Crimp 2
2 Copper Crimp 1
1 Copper Crimp 0
Terminal Block
Copper or
.120 -.430 1 10-2 Aluminum N/A
Conductors
NOTE:
Fused kits require a 13/32” x 1 1/2” fuse. DO NOT USE GLASS OR INDICATING TYPES.
Waterproof or direct burial wire is recommended. THHN is NOT recommended.
* For solid wire: 14-4 AWG, use codes U, UA, C, or A. 2 AWG, use codes LC or LA.
75°C / 600 Volts Max.
Example:
A Y-Tap Kit with set screws for a 2 AWG phase line side conductor with a
diameter of .472” and a 10 AWG copper load side conductor is ordered as
an 82S-EAFB1-C.
Insulation Equivalent Stranded* Ordering
Diameter Range Conductor Conductor Type Code
(Inches) (See Table) Size (AWG) (
CHOOSE 1)
12-6 Copper Crimp U
12-6 Aluminum Crimp UA
.120-.430 1
4 or 2 Copper Crimp LC
4 or 2 Aluminum Crimp LA
NOTE: It is not necessary to use the load side ordering code if it is the same
as the line side code, i.e., a 65U-U is ordered as a 65U.
Insulation Equivalent Stranded* Ordering
Diameter Range Conductor Conductor Type Code
(Inches) (See Table) Size (AWG) (
CHOOSE 1)
12-6 Copper Crimp C
.120 -.430 1 12-6 Aluminum Crimp A
4 or 2 Copper Crimp LC
12-6 Copper Crimp C
12-6 Aluminum Crimp A
.120 -.430 1
4 or 2 Copper Crimp LC
4 or 2 Aluminum Crimp LA
Insulation Ordering Stranded* Ordering
Diameter Range Code Conductor Type Code
(Inches) (
CHOOSE 1)
Size (AWG) (
CHOOSE 1)
10 Copper Crimp 6 –
.155-.430 ADB 8 Copper Crimp 4 –
6 Copper Crimp 3 –
4 Copper Crimp 2 –
.420-.785 EAFB 2 Copper Crimp 1 –
1 Copper Crimp 0 –
1/0 Copper Crimp 10 –
.155-.430 ADB 10 1 –
8 1 –
6 Terminal Block
1 –
4 with Set Screws 1 –
2 Copper or Alum. 1 –
.420-.785 EAFB 1 Conductors 10 –
1/0 10 –
LR32565
Thisfamilyofpolyesterblocksisidealforhightemperatureapplications.Theruggedmaterial
withstandstemperaturesupto302°F(150°C)
• Threecontactstylescoverbroadwirerange—acceptsinglewireorcombinationsfrom22AWG
 to8AWGsolidorstranded
• Ratedat15Ato50Apercircuit
• Flatbasemodelsmountdirectlytosurfaces;dovetailbasemodelsmountonstandardchannel
• Onlyoneendsectionneededperblockassembly
• Readilyidentifiablecircuits-writedirectlyonmattesurfaceofblock
• Sectionssnap-fitwithHeavyDuty,IntermediateHeavyDutyandFuseblocks
A-28 WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
TerminaL BLoCKs
Wire TerminaTion
100 Series Terminal Blocks - Miniature (High Density)
Theseminiatureterminalblocksfitonamuchsmallerchanneltosavevaluablepanelspaceorcanbesurface
mounteddirectlytothepanel.Miniatureblocksacceptwireaslargeas12AWG.
• Nowirecrimpingrequired–clampcontactsholdwirefrom30AWGto12AWGbetterthancrimp-on
 terminals
• Savesinstallationtimeandcost–tubularclampcontactssuppliedwithcaptivescrewsbackedout
• Nylonhousingforruggedapplications
• Positivestoppreventswirefrombeinginsertedtoofarandpreventsscrewfrombeingtightenedon
 insulation;easyaccesscontactprovidessafe,reliableandcost-effectiveconnection
• Quickinstallationandchange–additionalsectionsmaybeaddedorremovedwithoutremoving
 channelmountingscrew
• Matte-finishareaformarkingdirectlyonblock
WIRE RANGE: Solid or Stranded
Tubular Clamp
1 #12 AWG, 1 #14 AWG, 1 to 3 #16 AWG, 1 to 5 #18 AWG, 1 to 6 #20 AWG,
1 to 7 #22 AWG
Catalog Number -
100 Series 125 115 End Section
130 120
Mounting Style Direct
Mount
(Flat Base)
Channel
Mount
(Dovetail Base)
Direct
Mount
(Flat Base)
Channel
Mount
(Dovetail Base)
Housing Material Nylon
Maximum Service Temperature 125°C (257°F)
Flammability UL94V2
Wire Strip Length (in.) 5/16
Torque (in-lbs.) 6-9
UL Rating 28A @ 300V
Wire Range (AWG) Solid & Stranded 30-12
Pitch (in.) 0.25
Terminals per foot 48
900 Series Terminal Blocks - MEDIUM Duty
Housing Material Polyester (gray)
Contact Material Copper Alloy, Zinc Plated
Screw Material Steel, Zinc Plated
Maximum Service Temperature 150°C (302°F)
Flammability UL94V-0 Rated
Specifications
Center-to-Center Spacing: .375 in.
Voltage Rating: 600 Volt max., Current: 50 Amp max.
WIRE RANGE: Solid or Stranded
Strap Screw – 1 #22 to 1 #14 AWG
Tubular Screw – 1 #8 AWG, 1 #10 AWG, 1 to 3 #12 AWG, 1 to 4 #14 AWG, 1 to 4 #16 AWG, 1 to 5 #18 AWG, 1 to 10 #22 AWG
Tubular Clamp – 1 #10 AWG, 1 or 2 #12 AWG, 1 to 3 #14 AWG, 1 to 4 #16 AWG, 1 to 5 #18 AWG, 1 to 10 #22 AWG
Catalog Number 921 0921 924 0924 925 0925 930 0930
Mounting Style Direct Mount Channel Mount Direct Mount Channel Mount Direct Mount Channel Mount End Section End Section
(Flat Base) (Dovetail Base) (Flat Base) (Dovetail Base) (Flat Base) (Dovetail Base) (Direct Mount) (Channel Mount)
Ampacity 15A 50A 30A
Contact Type Strap Screw Tubular Screw Tubular Clamp
Screw Type 6-32
10-32 10-32 — —
Combo Head Combo Head Combo Head
Screw Torque 12 in-lbs. 8 in-lbs. 8 in-lbs.
Wire Range (AWG)
#14 to #22 #8 to #22 #10 to #22
A-29
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
TerminaL BLoCKs
LR25557 E63810
200 Series Terminal Blocks
Nylon Heavy Duty
Thiscompactdesign,heavy-dutyline
acceptssinglewireorcombinationsup
to4AWG,solidorstranded;600V
• 138circuitsper6footlength
• Two-wayflat-basemodelssurfacemount
 directlytothepanelorsnap-onminiaturechannel;dovetail
 basemodelsmountonstandardchannel
• Sectionssnap-fitwithPhenolicHeavyDuty,Intermediate 
 HeavyDutyandFuseblocks
Specifications
Center-to-Center Spacing: .50 in. CL: 24 circuits per foot.
WIRE RANGE: Solid or Stranded
Strap Screw – 1 #22 to 1 #10 AWG
Tubular Screw – 1 #4 AWG, 1 #6 AWG, 1 or 2 #8 AWG, 1 to 4 #10 AWG,
1 to 5 #12 AWG, 1 to 6 #14 AWG, 1 to 6 #16 AWG, 1 to 8 #18 AWG
Tubular Clamp – 1 #6 AWG, 1 or 2 #8 AWG, 1 to 3 #10 AWG, 1 to 4 #12 AWG,
1 to 4 #14 AWG, 1 to 6 #16 AWG, 1 to 8 #18 AWG
Catalog
Number Mounting Style Ampacity Contact Type Screw Type Wire Range
(AWG)
Wire Strip
Length Material
241 Unpainted Direct Mount (Flat Base) 35A Strap Screw 10-32 Slotted Binding Head #22 to #10
Nylon
0241 Painted Channel Mount (Dovetail Base)
242 Unpainted Direct Mount (Flat Base) 85A Tubular Screw 1/4-28 Slotted Headless #18 to #4 1/2 in.
0242 Painted Channel Mount (Dovetail Base)
243 Unpainted Direct Mount (Flat Base) 65A Tubular Clamp 1/4-28 Slotted Headless #18 to #6 1/2 in.
0243 Painted Channel Mount (Dovetail Base)
250 End-Section (Direct Mount) — —
0250 End Section (Channel Mount) — —
221 Painted Direct Mount (Flat Base) 35A Strap Screw 10-32 Slotted Binding Head #22 to #10
Phenolic
0221 Painted Channel Mount (Dovetail Base)
222 Painted Direct Mount (Flat Base) 85A Tubular Screw 1/4-28 Slotted Headless #18 to #4 1/2 in.
0222 Painted Channel Mount (Dovetail Base)
223 Painted Direct Mount (Flat Base) 65A Tubular Clamp 1/4-28 Slotted Headless #18 to #6 1/2 in.
0223 Painted Channel Mount (Dovetail Base)
230 End-Section (Direct Mount) — —
0230 End-Section (Channel Mount) — —
Nylon Heavy Duty Phenolic Heavy Duty
Housing Material Nylon, Type 6/6 unfilled Phenolic, Filled, Flame retardant
Contact Material Copper / Copper Alloy Copper / Copper Alloy
Screw Material Steel Plated Steel Plated
Maximum Service Temperature 125°C (257°F) 150°C (302°F)
Breakdown Voltage AC, 60 Hz 7000V 7000V
Dielectric Strength (RH40% at sea level) 470-385 V/mil thickness (per ASTM D149) 300V/mil thickness (per ASTM D149)
UL High Voltage Arc Testing (in./min.) 0.1 - .35 .49 - .59
Water Absorption (24 hrs. % weight gain) 1.5% 45% (per ASTM D570)
Flammability 94V-2 (per UL94) 94V-1 (per UL94)
Chemical Resistance Resistant to aromatic hydrocarbons, strong alkalies Resistant to acids, alkalies, aliphatic hydrocarbons and ketones (per ASTM D5343)
Radiation Resistance (ergs g1 C) 8 X 1072 X 108 min.
Phenolic Heavy Duty
Phenolicheavydutyblocksareidealfor
hightemperature,highcurrent
applications.
• Sturdyblockacceptssinglewireor
 combinationsupto4AWGsolidor
 stranded
• 122circuitsper6footlength
• Sectionssnap-fitwithNylonHeavyDuty,Intermediate
 HeavyDutyandFuseBlocks
Specifications
Center-to-Center Spacing: .56 in. CL: 20 circuits per foot.
WIRE RANGE: Solid or Stranded
Strap Screw – 1 #18 to 1 #8 AWG
Tubular Screw – 1 #4 AWG, 1 #6 AWG, 1 or 2 #8 AWG, 1 to 4 #10 AWG,
1 to 5 #12 AWG, 1 to 6 #14 AWG, 1 or 6 #16 AWG, 1 to 8 #18 AWG
Tubular Clamp – 1 #6 AWG, 1 or 2 #8 AWG, 1 to 3 #10 AWG, 1 to 4 #12 AWG,
1 to 4 #14 AWG, 1 to 6 #16 AWG, 1 to 8 #18 AWG
Voltage Rating: Blocks meet 600V creepage and clearance requirements of NEMA, UL and CSA for general industrial control equipment and
panelboards. Withstands voltages greatly in excess of IEEE switchgear standards for 750V.
• Threecontactstylesconservativelyratedto35Ato85A
• Onlyoneendsectionneededperblockassembly
• Readilyidentifiablecircuits–markdirectlyonpaintedmarkingsurfaceoruseremovablemarkingstrip
A-30 WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
TerminaL BLoCKs
Wire TerminaTion
800 Series Nylon
Intermediate Heavy Duty
Terminal Blocks
The800 Serieslineof600Vblocksis
conservativelyratedupto150Afora
single1/0AWGcopperwire.
• Exceptionallycompactblockaccepts
 singlewireorcombinationsupto1/0
• 92circuitsper6footlength
• Tubularscrewcontactstyleaccepts
 AWGsizesfrom12to1/0,solidorstranded
• Two-waymountingbasefitsstandardchannelormounts
 directlytoflatsurfaces
• Onlyoneendsectionneededperblockassembly
• Readilyidentifiablecircuits–writedirectlyonpaintedmarking
 surfaceoruseremovablevinylmarkingstrip
• Nylonhousingforruggedapplications,7/16-20slotted
 headlessscrews
• Snap-fitwithHeavy-DutyNylonandPhenolicandFuseBlocks
400 Series Phenolic Ultra
Heavy Duty – 250 KCMIL
(MCM) Terminal Blocks
ThisUltra Heavy Dutylineisratedup
to255Awithasingle250MCM
conductor.
• Compactblockacceptswiresizes
 upto2/0or250KCMIL(MCM)
• 57circuitsper6footlength
• Tubularscrewcontactstylefor
 maximumelectricalrating
• Blockmountsdirectlyonflatsurfaceorstandardchannel
• Onlyoneendsectionneededperblockassembly
• Readilyidentifiablecircuits–writedirectlyonpainted
 markingareaoruseremovablevinylmarkingstrip
• Hexsocketscrewsallowmaximumtorquewhenusing
 largewiresizes
• Highcurrentcapacitysnap-fitsectionalblocksdonot
 snap-fitwithotherblockstyles
Specifications
Center-to-Center Spacing: .75 in. CL: 16 circuits per foot.
WIRE RANGE: Solid or Stranded
Tubular Screw – 1 #1/0, 1 #1 AWG, 1 #2 AWG, 1 or 2 #4 AWG,
1 to 3 #6 AWG, 2, 3 or 5 #8 AWG, 1 to 6 #10 AWG, 1 to 7 #12 AWG
Ordering Information - pgs. A-30 & A-31
Specifications
Center-to-Center Spacing: 1.19 in. CL: 9 circuits per foot.
WIRE RANGE: Solid or Stranded
Tubular Screw – 1 #2/0, 1 #1/0, 1 #1 AWG, 1 or 2 #2 AWG, 1 to 3 #4 AWG, 1 to
3 #6 AWG, 1 to 4 #8 AWG, 1 to 6 #10 AWG, 2 to 8 #12 AWG
Tubular Screw – 1 #250 KCMIL, 1 #4/0, 1 #3/0, 1 or 2 #2/0, 1 or 2 #1/0, 1 or 2
#1 AWG, 1 to 3 #2 AWG, 1 to 4 #4 AWG, 1 to 5 #6 AWG
Catalog Number Mounting Style Ampacity Contact Type Screw Type Wire Range (AWG) Wire Strip Length
824 Painted Two-Way Mounting Base 150A Tubular Screw 7/16-20 Slotted Headless 12 to 1/0 11/16 in.
830 — End-Section
426 Painted Two-Way Mounting Base 175A Tubular Screw 1/2-30 Hex Socket #12-2/0 1 in.
427 Painted Two-Way Mounting Base 255A Tubular Screw 3/4-16 Hex Socket #6-250 KCMIL/MCM 1 in.
430 — End-Section
351 Direct Mount (Flat Base) 30A Strap Screw 10-32 Binding Head #22 to #8
0351 Channel Mount (Dovetail Base)
358 Direct Mount (Flat Base) 30A Strap Clamp 8-32 Pan Head w/Clamp #18 to #8 1/2 in.
0358 Channel Mount (Dovetail Base)
352 Direct Mount (Flat Base) 30A Tubular Screw 1/4-28 Set Screw #18 to #8 1/2 in.
0352 Channel Mount (Dovetail Base)
330 End-Section (Direct Mount) — —
0330 End-Section (Channel Mount) — —
Catalog Number Number of Circuits Ampacity Contact Type Screw Type Wire Range (AWG)
B102 2
50A Strap Screw (Steel) 10-32 Slotted Binding Head #18 to #8
B104 4
B106 6
B108 8
B112 12
A-31
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
TerminaL BLoCKs
Wire TerminaTion
Specification Chart - pgs. A-30 & A-31
300 Series Phenolic
Fuse Blocks
100 Series Phenolic One
Piece Terminal Blocks
• Providein-linecircuitprotectionfor
 anycircuitorgroupofcircuits
• Threecontactstylesforterminated
 orunterminatedwireareconservativelyratedto30A
• Remove,checkandreplacefusessafelyandquickly–
switch-actionfuseblocksopencircuitsbeforefusecanbe
removedorinstalled
• Goodcircuitdensitywhenmountedadjacently–91circuits
per6footlength
• Useinhightemperatureapplications–phenolichousing
withstandstemperaturesupto302°F(150°C)
• Flatbasemodelsforsurfacemounting,dovetailbasemodels
forstandardchannel
• Onlyoneendsectionneededperblockassembly
• Openorcloseseveralcircuitssimultaneously–holesin
pullerhandlesallowuseofnylon“ganging”rods
• Readilyidentifiablecircuits–markdirectlyonwhite,matte-
surfacepullerassembly,markingtabonblockoruse
removablemarkingtape
• Sectionssnap-fitwithHeavyDutyandIntermediateHeavy
DutyBlocks
Specifications
Center-to-Center Spacing: .75 in. CL: 16 circuits per foot.
Fuse Size: Any 13/32 in. x 1-1/2 in. ferrule-type cartridge fuse up to 30A,
indicating or non-indicating, which meets MIL. Spec. F-15160 is recommended.
WIRE RANGE: Solid or Stranded
Tubular Screw – Cat. No. 362 and 0362 – 1 #4 AWG, 1 #6 AWG, 1 or 2 #8 AWG,
1 to 4 #10 AWG, 1 to 5 #12 AWG, 1 to 6 #14 AWG, 1 to 6 #16 AWG, 1 to 8 #18 AWG
LR25557 E63810
Traditionalstandardintheheavy
industrial,railtransport,utilityand
trafficcontrolindustries.Therugged,
one-piececonstructionfindswide
applicationindirtyandvibration-prone
environments.
• Two,four,six,eightandtwelvecircuitmodels
• Strapscrewcontactsacceptwire8AWGandsmallerand
 areratedto50Amps
• Pilotpointscrewswithstrapscrewcontactsspeed
 installationtime
• Easilyidentifiablecircuitswithuseofplainwhitemarking
 strip
• Noassemblyrequired-eachblockisasingle,easily
 installedunit
Specifications
Center-to-Center Spacing: .63 in. CL
WIRE RANGE: Solid or Stranded
Strap Screw – 1 #18 AWG through 1 #8 AWG
Voltage Rating: Blocks meet 600V creepage and clearance requirements of NEMA, UL and CSA for general industrial
control equipment and panelboards. Withstands voltages greatly in excess of IEEE switchgear standards for 750V.
800 Series Nylon 400 Series Phenolic 300 Series Phenolic 100 Series Phenolic
Housing Material Nylon, Type 6/6 Unfilled Phenolic, Filled, Flame retardant Phenolic, Filled, Flame retardant Phenolic, Filled, Flame retardant
Contact Material Copper Copper Copper Alloy Copper / Copper Alloy
Screw Material Steel, Zinc-Plated Steel Plated Steel Plated Steel Plated
Maximum Service Temperature 125°C (257°F) 150°C (302°F) 150°C (302°F) 150°C (302°F)
Breakdown Voltage AC, 60 Hz 8800V 1000V 8400V
Dielectric Strength (RH40% at sea level) 470-385V/mil thickness
(per ASTM D149)
300V/mil thickness
(per ASTM D149)
300V/mil thickness
(per ASTM D149) 300V/mil thickness (per ASTM D149)
UL High Voltage Arc Testing (in./min.) .01 - .35 .49 - .58 .49 - .58 .49 - .58
Water Absorption (24 hrs. % weight gain) 1.5% 0.45% (per ASTM D570) 0.45% (per ASTM D570) 0.45% (per ASTM D570)
Flammability 94V-2 94V-1 (per UL94) 94V-1 (per UL94) 94V-1 (per UL94)
Chemical Resistance Resistant aromatic
hydrocarbons,strong alkalies
Resistant to acids, alkalies,
aliphatic hydrocarbons and
ketones (per ASTM D5343)
Resistant to acids, alkalies, aliphatic
hydrocarbons and ketones
(per ASTM D5343)
Resistant to acids, alkalies, aliphatic
hydrocarbons and ketones
(per ASTM D5343)
Radiation Resistance (ergs g1 C) 8 X 107 min. 2.7 X 108 min. 2.7 X 107 min. 2.7 X 107 min.
A-32 WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
misC.
Wire TerminaTion
Splice Cap Crimp Connectors
Splice Cap Insulators
Four-Way Crimp Tool
•
Designedformakingfast,permanent,pressure-type
 connections
•
Solidcoppersleevesrequirelesscrimpingpressure
• Resistcorrosioninharshenvironments
•
UL486CListedandCSAC22.2#188Certified;complywith
FederalSpecificationW-S-61D
•
Convenient,safeandfastinstallation
•
Snap-onnylonconstruction
•
Ratedat105°C(221°F)–600V(1,000Vmaximumin
 fixturesandsigns)
•
Patenteddesignensuresevencompressionandreliable
 connectors
•
Spring-loaded,cam-actuatedplungers
•
Fingertipadjustmentfordifferent
 connectorsizes
LISTED
*1,000V maximum in fixtures and signs
Description Wire Combination
Range Quantity Cat. No.
Copper
Crimp
Connector
600V*
18 to 10 AWG
Min. 2 #18
Max. 4 #12
Box of 100 2006S
Bag of 1,000 2006SB
Copper
Crimp
Connector
600V*
14 to 4 AWG
Min. 2 #10
Max. 2 #6
Box of 50 2011S
Bag of 500 2011SB
For Connector Model Quantity Cat. No.
2006S
Box of 100 2007
Bag of 1,000 2007B
2011S
Box of 50 2014
Bag of 500 2014B
Description Cat. No.
Four-Way Crimp Tool C-24
Mounting Channels
Channel Clamps
Jumpers
Mounting
Channels Length Cat.
No. For use with:
Miniature
Channel
3 ft. 12 Heavy-Duty (200 Series)
Miniature (100 Series)
Steel Channel
6 ft.
3 ft.
60
63
Medium Duty (900 Series)
Heavy Duty (200 Series)
Intermediate Heavy Duty (800 Series)
Ultra Heavy Duty (400 Series)
Fuse Blocks (300 Series)
Aluminum
Channel
(Pre-punched)
6 ft.
3 ft.
64
67
Medium Duty (900 Series)
Heavy Duty (200 Series)
Intermediate Heavy Duty (800 Series)
Ultra Heavy Duty (400 Series)
Fuse Blocks (300 Series)
Mounting
Channels Cat. No. For use with:
Miniature Clamp
11 High Density Miniature (100 Series)
Heavy-Duty (200 Series)
Universal Clamp
68
High Density Miniature (100 Series)
Medium Duty (900 Series)
Heavy Duty (200 Series)
Intermediate Heavy Duty (800 Series)
Ultra Heavy Duty (400 Series)
Fuse Blocks (300 Series)
Screw Clamp
61
High Density Miniature (100 Series)
Medium Duty (900 Series)
Heavy Duty (200 Series)
Intermediate Heavy Duty (800 Series)
Ultra Heavy Duty (400 Series)
Fuse Blocks (300 Series)
Description Cat. No. Available for:
Jumpers for
Tubular Contacts
41 Heavy-Duty Phenolic (200 Series)
42 Heavy Duty (200 Series)
70 Medium Duty (900 Series)
43 Heavy-Duty Phenolic (200 Series)
Fish Tapes ............................................B-2
Wire pulling luBricanTs ....................B-8
conduiT Benders .............................. B-12
pulling supplies ................................B-14
Wire sTrippers ..................................B-16
Wire cuTTers .....................................B-19
pliers ................................................ B-21
Miscellaneous Tools ............ B-26, B-30
caBle cuTTers ................................... B-28
screWdrivers / nuTdrivers ............ B-32
indusTrial BiTs & accessories ........ B-43
insulaTed Tools ................................ B-46
Tool KiTs ........................................... B-52
Tool Bags ......................................... B-54
cuTTing supplies ...............................B-57
caBle Ties ......................................... B-68
caBle sTaples ....................................B-74
TherMo-shrinK® ............................... B-75
Wire MarKer BooKleTs .....................B-79
sWiTches ............................................ B-81
locKouT/TagouT ............................... B-88
coMMuTaTor MainTenance ............. B-109
Tools & supplies
B
Tools & supplies
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
B-2
Tuff-Grip™ Pro . . . Industry’s Leading Fish Tape!
Fish Tapes
Exceptionally Durable Case
Speed-Grip™ Handle
Large, comfortable
ergonomically-designed,
grasp from the top or side.
Allows for use with gloves.
Available in:
• BluedSteel™
• StainlessSteel
• Zoom™JacketedStainless
Steel
• Gold-Fish®BrassPlated
Steel Coil
• S-Class®NylonJacketed
• Fiberglass
• Volt-Guard™1000V
 Non-ConductiveFiberglass
Full-perimeterhandle
bandhelpskeepdirt
and moisture out,
prolonging life.
Tuff-Cuff™ tape retaining
featurekeepstape
properly positioned in
the opening.
Etchedin12”increments
to provide instant conduit
length.
Length marked! Now
laser etched in 12”
increments to provide
instant conduit length.
WARNING
Always use approved safety glasses when using this product. Do not use
near energized equipment. Electrical shock may occur. Make sure all power
is off. Do not use pliers or other tools that may kink, damage, or weaken any
round sh tapes such as S-Class®, Nylon or Zoom™. Use only a sh tape
puller designed for this purpose. While sh tapes made of berglass, nylon or
other composite materials are non-conductive, they may have a metal eyelet
that is conductive and could be grounded against conduit. Do not use on
live electrical circuits. Do not attempt to use sh tape that is fractured or has
multiple ends. Keep the sh tape wound in the reel to prevent damage to the
tape. Use this product in a safe work position to prevent loss of balance.
Never remove the screws from case while sh tape is coiled inside the reel.
Failure to follow instructions may result in severe bodily harm or damage to
property.
Tools & supplies
B-3
Fish Tapes
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
Fish Tape Cases & Handles
Fish Tape Materials
n Laser etched in 12” increments to
provide instant conduit length
n Unique finish is non-oily and
resists rust
n Multiple options in width, length
and eyelet for ease of use
n Industry’s straightest wire
n Stiffer for long runs
n Highest grade carbon steel
n Tensile strength 1,600 lbs.
n Laser etched in 12” increments
to provide instant conduit
length
n Won’t rust or corrode in
damp locations or humid
environments
n Super clean finish prevents
marks on walls or carpets
n Great for wet or corrosive work
environment
n Smoother pay-out
n Tensile strength 1,600 lbs.
n Brass-plated coiled steel resists
rust
n No “memory” – hangs straight
after being coiled for long periods
n Kink proof
n Excellent for multiple bends
n Non-conductive to 1000V
n Rectilinear profile for superior
pushing power
n Designed for use around live
circuits
n Pulling strength 350 lbs.
n 19 strands of stainless steel
n Ultra hard nylon jacket adds
slipperiness, protects cables
and user’s hands
n Excellent for corrugated plastic
conduit
n Non-conductive tape designed for
use around live circuits
n Strong S-Class® core for longer
life and greater pushing power
n Smooth nylon jacket provides
great handling around bends
n Omni-directional pushing
n Pulling strength 500 lbs.
Thumb Winder™
Convenient 7 in. size can be stored in tool bag
Durable, impact resistant ABS case
Easy-to-use thumb-operated rewind
Great for datacomm and small-sized
conduit applications
Rapid-Pak®
Inner rotating reel with winding knob
retrieves tape faster than traditional fish
tapes for increased labor savings
Funneled tape opening reduces kinking
and tape breakage
Reversible, hinged knob for right or left
handed rewinds
Stationary handle for extra durability
Impact-resistant plastic case
 ProHandle
New vertical grip allows for faster payout and rewind
Ergonomically designed handle puts less strain on
your wrist
Large hand opening allows for use with
gloves
Attached to the exceptionally durable
Tuff-Grip™ Pro Case*
*On select S-Class® and Zoom™ Fish Tape Models.
19 strand twisted radial steel core
encased in high molecular density
outer jacket.
Tuff-Grip™Pro
• Tuff-Cuff™ tape retaining feature keeps
tape properly positioned in the opening
Full-perimeter handle band helps keep
dirt and moisture out.
Superior pull-out and rewind
characteristics.
Exceptionally durable case and handle
n Excellent for multiple bends or
wet/corrosive work environment
n Pulling strength 1,000 lbs.
B-4
Tools & supplies
Fish Tapes
Blued-Steel™ Fish Tapes
Stainless Steel Fish Tapes
IDEAL is #1 in market share for Fish Tapes!
Laser etched in 12” increments to
provide instant conduit length
High column strength for longer
runs
Non-oily finish resists rust
Laser etched in 12” increments to provide
instant conduit length
Won’t rust or corrode in humid environments
Stainless steel design provides a
smooth pay-out
Length (ft.) Width & Thickness Case
Diameter End Type Tuff-Grip™ Pro Thumb-Winder™ Replacement
Tapes
Blued Steel™
25 1/8 in. x .045 in. 7 in. Formed hook – 31-012 –
50 1/8 in. x .045 in. 7 in. Formed hook – 31-010 –
50 1/8 in. x .060 in. 9 in. Formed hook 31-033 – 31-004
60 1/8 in. x .060 in. 12 in. Formed hook 31-055 – 31-035
120 1/8 in. x .060 in. 12 in. Formed hook –––
120 1/8 in. x .060 in. 12 in. Formed hook 31-056 – 31-036
240 1/8 in. x .060 in. 12 in. Formed hook –––
240 1/8 in. x .060 in. 12 in. Formed hook 31-057 – 31-038
50 1/4 in. x .060 in. 12 in. Formed hook 31-059 – 31-051
100 1/4 in. x .060 in. 12 in. Formed hook 31-058 – 31-050
200 1/4 in. x .060 in. None Formed hook – 31-052
400 1/4 in. x .060 in. None Formed hook – 31-2128
15,000 1/4 in. x .060 in. None Formed hook – 31-2982
Length
(ft.) Width & Thickness Case
Diameter End Type Tuff-Grip™ Pro Replacement
Tapes
Stainless Steel
120 1/8 in. x .060 in. 12 in. Formed hook 31-066 31-073
240 1/8 in. x .060 in. 12 in. Formed hook 31-067 31-074
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Based on 2011 data available from Epicor/Vista.
B-5
Tools & supplies
Fish Tapes
S-Class® Fish Tapes
IDEAL is #1 in market share for Fish Tapes!
Volt-Guard Fish Tapes
Gold-Fish® Fish Tapes
Non-conductive tape for use around
live circuits
Structural glass core gives you
a more durable fiberglass tape
Ultra-flexible tape for hard-to-navigate
areas
Brass-plated coils resist rust
Great for hard to navigate conduit
with multiple bends
Nylon jacket protects the stainless steel core
while adding to the slipperiness of Zoom™
Non-conductive up to 1000V
Elliptical design gives the Volt-Guard
greater pushing power
Length (ft.) Width & Thickness Case Diameter End Type Tuff-Grip™ Pro Rapid-Pak®Replacement Tapes
S-Class® Nylon Jacketed Fiberglass
50 3/16 in. diameter 12 in. Leader 31-060 31-187 31-150
50 3/16 in. diameter 12 in. Eyelet 31-062 31-190 31-160
100 3/16 in. diameter 12 in. Leader 31-061 31-186 31-152
100 3/16 in. diameter 12 in. Eyelet 31-063 31-189 31-162
200 3/16 in. diameter 16 in. Leader 31-064 31-207 31-155
200 3/16 in. diameter 16 in. Eyelet 31-065 31-208 31-165
Zoom™ Fish Tapes
Length (ft.) Width & Thickness Case Diameter End Type Tuff-Grip™ Pro Replacement Tapes
Zoom™ Nylon Jacketed Stainless Steel
50 3/16 in. diameter 12 in. Eyelet 31-090 31-091
100 3/16 in. diameter 12 in. Eyelet 31-092 31-093
200 3/16 in. diameter 16 in. Eyelet 31-096 31-097
Length (ft.) Width & Thickness Case Diameter End Type Tuff-Grip™ Pro Replacement Tapes
Fiberglass Nylon Jacket
60 .1875 in. x .094 in. 12 in. Eyelet 31-542 31-552
120 .1875 in. x .094 in. 12 in. Eyelet 31-544 31-554
Length (ft.) Width & Thickness Case Diameter End Type Tuff-Grip™ Pro Replacement Tapes
Gold-Fish® Brass Plated Steel Coil
50 3/16 in. diameter 12 in. Eyelet 31-144 31-141
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
B-6
Tools & supplies
Fish Tape accessories
Volt-Guard Repair Kit
Fish Tape Leaders
Fish Tape Swivel Ball
Tuff-Grip™ Pro Accessories
Guides fish tape around bends in conduit
Handles up to six 10 AWG bare wires
Pulls up to 500 lbs.
Swivels to prevent wires from twisting
during pull
Designed for use on 1/8 in. steel or
stainless steel tapes
Eyelet holds up to four 10 AWG bare wires
Includes two eyelets
and adhesive
Easy to apply
Description Cat. No.
Fish Tape Leader for steel or stainless steel tapes 31-148
Fish Tape Leader for S-Class® Fiberglass Fish Tape 31-159
Description Cat. No.
Fish Tape Swivel Ball 31-085
Description Cat. No.
Volt-Guard Repair Kit 31-541
Description Cat. No.
Fish Tape Parts Kit KB-0173
K-8985 Includes
Fish Tape Case (2 fish tape case halves)
(1) Handle
(4) Screws
S-Class® Fiberglass &
Zoom™ Fish Tape Field
Application Kits
Crimps on new eyelet or
leader in minutes
Dies can be used with
Crimpmaster™ Crimp Tool
Connection guaranteed
to withstand 500 lbs.
Description Cat. No.
Field Application Kit includes: Crimpmaster™ Crimp Tool frame,
die set, S-Class® eyelets (2), S-Class® leaders (2), Zoom™
eyelets (2) & instant adhesive
31-156
Die Set Kit* includes: eyelets (2), leaders (2) & instant adhesive 31-164
Replacement eyelets (4) for S-Class® Fish Tapes 31-158
Replacement eyelets (2) for Zoom™ Fish Tapes 31-094
Replacement leaders (4) for S-Class® Fish Tapes 31-159
Die Set Only 31-166
*For those who already have a Crimpmaster™ Crimp Tool.
IDEAL is #1 in market share for Fish Tapes!
Based on 2011 data available from Epicor/Vista.
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
B-7
Tools & supplies
Ultra smooth gel coat
helps protect hands
from fiberglass.
New crimped edge provides Tuff-Rod
with exceptional “pull-off” strength for a
durable, long-lasting fish pole.
Fiber reinforced compos-
ite pultrusion for consis-
tent high quality.
Fishing poles
Tuff-Rod™ Fishing Poles
Tuff-Rod™ Regular Flex
Accessory Kits
Tuff-Rod™ Extra Flex Glow
Strong, lightweight, flexible extendable fiberglass rod kits
Use to reach and pull wires over suspended ceilings, in cable trays or through interior walls
Packaged in clear tubes for protection and long-term storage
White
Glow
Includes replacement
heads, one threaded
bullet nose, one
threaded J hook
and one
threaded
wisk
1/4 in. white fiberglass
Extra stiffness for added control when maneuvering wires
3/16 in. pale green luminescent fiberglass
Glow-in-the-dark material for easy use in attics,
basements and other dim lit areas
Description Cat. No.
12 ft. kit with fixed bullet nose and threaded J hook
(3 ea. 4 ft. sections) 31-611
24 ft. kit with fixed bullet nose and threaded bullet nose
(4 ea. 6 ft. sections) 31-612
12 pack of 1/4 in. x 4 ft. Regular Flex Replacement Rods 31-643
12 pack of 1/4 in. x 6 ft. Regular Flex Replacement Rods 31-644
Description Cat. No.
12 ft. kit with fixed bullet nose and threaded J hook
(3 ea. 4 ft. sections) 31-631
30 ft. kit with fixed bullet nose and threaded bullet nose
(5 ea. 6 ft. sections) 31-633
12 pack of 3/16 in. x 4 ft. Extra Flex Glow Replacement Rods 31-647
12 pack of 3/16 in. x 6 ft. Extra Flex Glow Replacement Rods 31-648
Description Cat. No.
3/16 in. Accessory kit 31-651
1/4 in. Accessory kit 31-652
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
IDEAL is #1 in market share for Fish Tapes!
B-8 WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Tools & supplies
luBricanTs
ClearGlide™
Wire Pulling
Lubricant
Yellow 77®
Wire Pulling
Lubricant
Yellow 77® Plus
Wire Pulling
Lubricant
Aqua-Gel® ll
Wire Pulling
Lubricant
Aqua-Gel® CW
Wire Pulling
Lubricant
Aqua-Gel® IIP
Wire Pulling
Lubricant
Velocity™
Wire Pulling
Lubricant
Color Clear Yellow Yellow Blue Pink Blue Cream
Base Polymer Wax Wax Polymer Polymer Polymer Polymer
Average Coefficient of
Friction* .23 .17 .16 .19 .19 .19 .16
Safe Storage 32°F – 180°F
(0°C – 82°C)
32°F – 130°F
(0°C – 54°C)
32°F – 190°F
(0°C – 88°C)
32°F – 180°F
(0°C – 82°C)
-28°F – 190°F
(-33°C – 82°C)
32°F – 180°F
(0°C – 82°C)
40°F – 140°F
(4°C – 82°C)
Application Temperature
Range
40°F – 100°F
(4°C – 38°C)
40°F – 100°F
(4°C – 38°C)
40°F – 100°F
(4°C – 38°C)
40°F – 100°F
(4°C – 38°C)
-28°F – 40°F
(-33°C – 4°C)
40°F – 100°F
(4°C – 38°C)
25°F – 140°F
(-3.9°C – 60°C)
COMPATIBILITY (Cable Types):
Rubber •••••••
Neoprene •••••••
Nylon •••••••
PVC •••••••
High-density or cross-linked
polyethylene •••••••
Low-density polyethylene • •••••
Semiconducting jacket • •••••
Hypalon •••••••
*Results from NEETRAC, an independent testing laboratory affiliated with The Georgia Institute of Technology.
Select-a-Lubricant
Wiring Pulling Lubricant Selection Guide
Finished
Construction
Commercial Wire Pulling Utility Cable Pulling
New
Construction
New
Construction
Indoors or
Outdoors
Indoors or
Outdoors
Indoors or
Outdoors
Indoors or
Outdoors
Outdoors
ONLY Outdoors
40°F-120°F
4°C-49°C
-28°F-40°F
-33°C-4°C
40°F-120°F
4°C-38°C
Upto250ft.
Upto24hrs.
Upto250ft.
Upto72hrs.
Upto250ft.
Upto24hrs.
Aqua-Gel® II Aqua-Gel®
CW
Aqua-Gel®
IIP
40°F-120°F
4°C-49°C
40°F-120°F
4°C-49°C
40°F-120°F
4°C-49°C
Upto75ft.
Upto8hrs.
Upto1,200ft.
Upto24hrs.
Upto1,200ft.
Upto24hrs.
ClearGlide™
Yellow 77®Yellow 77®
Plus
Indoors or
Outdoors
40°F-140°F
4°C-82°C
Upto250ft.
Upto24hrs.
Velocity™
B-9
Tools & supplies
Description Cat. No.
1-qt. Squeeze bottle 31-358
1-gal. Bucket 31-351
5-gal. Bucket 31-355
55-gal. Drum 31-365
Yellow 77® Plus
Wire Pulling Lubricant
ClearGlide™
Wire Pulling Lubricant
Yellow 77®
Wire Pulling Lubricant
Rapid Glide™ polytetrafluoroethylene additive provides
greater lubricity than other wax-based
lubricants — great for tough pulls
Safe to use with all cable types
Clings to cable throughout long
runs, even where moisture is
present
Remains stable in high
temperatures — usable
from 30°F to 190°F (-1°C to 88°C)
Dries slowly to a thin, non-conductive film that won’t
harden in conduit
Easy to apply by hand or brush
Creamy texture applies easily and uniformly
Homogeneous blend requires no mixing
Won’t dry out – surface coat forms to control evaporation
Environmentally safe – non-toxic, non-flammable and
non-corrosive
The #1 brand of wire pulling
lubricant since 1959 — the
perfect general purpose lube
Wax-based formula
provides superior lubricity
Safe to use with most cable
types except low-density
polyethylene and semi-
conducting jackets
Clings to cable throughout long
pulls, even where moisture is present
Won’t break down or separate after repeated exposure
to freezing temperatures
Dries to a thin, non-conductive film
Easy to apply by hand or brush
Creamy texture applies easily and uniformly
Homogeneous blend requires no mixing
Won’t dry out — surface coat forms to control
evaporation
Environmentally safe — non-toxic, non-flammable and
non-corrosive
Clear and colorless for quick and easy clean-up —
great for indoor and retrofit pulls
Exceptional lubricity for
super-fast pulls
Polymer-based formula is
perfect for all electrical and
datacomm applications
Safe to use with all cable types
Controlled evaporation rate is
ideal for shorter runs
Remains stable over wide temperature ranges — usable
from 30°F to 180°F (-1°C to 82°C)
Dries to a semi-fluid film that won’t clog conduit
Easy to apply by hand, brush or pump
Environmentally safe — non-toxic, non-flammable
and non-corrosive
Description Cat. No.
1-qt. Squeeze bottle 31-398
1-gal. Bucket 31-391
5-gal. Bucket 31-395
Description Cat. No.
1-qt. Squeeze bottle 31-388
1-gal. Bucket 31-381
5-gal. Bucket 31-385
55-gal. Drum 31-2143
LISTED
LISTED
LISTED
luBricanTs
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
B-10
Tools & supplies
Aqua-Gel® IIP
Cable Pulling Lubricant
Aqua-Gel® CW
Cable Pulling Lubricant
Features the same excellent qualities as
Aqua-Gel® II Cable Pulling Lubricant
with a lower temperature range for
use outdoors in cold weather
Polymer-based, cold-weather
formula remains stable in storage
from -28°F to 190°F (-33°C to 82°C)
Formulated for exterior use in cold
weather conditions
Cleans up easily with soap and water
Clings to cable throughout long pulls
Well-suited for hand or poured applications
Environmentally safe — non-toxic, non-flammable and
non-corrosive
Features the same
excellent qualities as
Aqua-Gel® II Cable
Pulling Lubricant with a
lower viscosity for easy
pouring and pumping
Pourable formula clings to
cable – eliminates hand
application for a cleaner
and safer job
Compatible with all cable types
Cleans up easily with soap and water
Environmentally safe – non-toxic, non-flammable and
non-corrosive
Aqua-Gel® II
Cable Pulling Lubricant
Polymer-based formula provides maximum tension
reduction in high-stress electrical and communication
cable-pulling operations
Compatible with all cable
types except composite
rubber
Cleans up easily with soap
and water
Clings to cable throughout
long pulls
Remains stable over wide
temperature range — usable
from 28°F to 180°F (-2°C to 88°C)
Dries to a semi-fluid film that won’t clog conduit
Easy to apply by hand, brush or pump
Environmentally safe – non-toxic, non-flammable and
non-corrosive
For outdoor use only LISTED
Description Cat. No.
1-qt. Squeeze bottle 31-378
1-gal. Bucket 31-371
5-gal. Bucket 31-375
55-gal. Drum 31-3855
Description Cat. No.
1-gal. Jug 31-421
5-gal. Bucket 31-425
55-gal. Drum 31-435
LISTED
Description Cat. No.
1-qt. Squeeze bottle 31-298
1-gal. Jug 31-291
5-gal. Bucket 31-295
luBricanTs
Velocity™
Wire Pulling Lubricant
High cling factor
Maximum friction reduction
Specification grade
Compatible with all popular
cable types
Temperature stable
Non-combustible residue
Environmentally safe — non-toxic,
non-flammable and non-corrosive
Description Cat. No.
1-qt. Squeeze bottle 31-276
1-gal. Bucket 31-277
5-gal. Bucket 31-278
LISTED
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
B-11
Tools & supplies
Duct Seal
Noalox®
Anti-Oxidant
Recommended Qty. of
Lubricant Formula
Selection & Application
Guide
Q = .0015 x L x D
Q = Quantity of recommended lube in gallons
L = Length of pull in feet
D = Nominal ID of conduit in inches
The formula listed above is used as a guideline on estimating the
quantity of lube needed for various jobs. Many factors go into a
cable pull, however this formula is just based on length of the pull
and diameter of the conduit.
Increase quantities for the following troubles:
• Stiff,heavycable • Pullswithseveralbends
• Rough,oldordirtyconduits • Hightemperatures
• Highpercentconduitfill
WebBasedSelection&ApplicationGuide:
http:ideal.sdafiles.com
Anti-oxidant compound
improves efficiency and
service life of aluminum
electrical applications
Suspended zinc particles
penetrate and cut
aluminum oxide
•
Provides additional inner-strand and inner- conductor
current paths for improved conductivity and cooler
connections
Carrier material excludes air to minimize further oxidation
For use with pressure-type wire connectors including lugs,
taps, service entrances and split-bolts
Reduces galling and seizing when applied on
aluminum conduit joints promoting good ground
continuity
Seals around junction boxes,
flashings and service
entrances
Permanently soft, non-
toxic compound can
be painted immediately
after application
Won’t adversely affect
other plastic materials
or corrode metals
LISTED
LISTED
Description Cat. No.
1 lb. Block (10/carton) 31-601
5 lb. Block (10/carton) 31-605
Description Cat. No.
1/2-oz. Tube 30-024
4-oz. Squeeze bottle 30-026
8-oz. Squeeze bottle 30-030
8-oz. Brush cap 30-031
1-gal. Bucket 30-032
5-gal. Bucket 30-040
accessories
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
Document # 6810-005
form #5100-048-01, rev. date 1/13/2009
MATERIAL SAFETY DATA SHEET
GENERAL INFORMATION
PRODUCT NAME OR NUMBER (as it appears on label)
Noalox® Anti-Oxidant
CATALOG NUMBER
All “30” Series
MANUFACTURER’S NAME
IDEAL INDUSTRIES, INC.
EMERGENCY TELEPHONE NO.
(
815) 895-5181
ADDRESS (Number, Street, City, State, Zip Code)
Becker Place, Sycamore, IL 60178
HAZARDOUS MATERIAL DESCRIPTION, PROPER SHIPPING NAM E, HAZARD CLASS, HAZARD CLASS NO., HAZARD ID NO. (49 CFR 172.101)
None
CHEMICAL DESCRIPTION
Petroleum-Based Mixture
FORMULA
Proprietary
SECTION I - INGREDIENTS
CAS REGISTRY NO.
%W
CHEMICAL NAME(S)*
Listed as a carcinogen
in NTP, I ARC or OSHA
1910(z) (specify)
9003-29-6
<80
Polybutene
No
7440-66-6
20
Zinc Dust
No
112945-52-5
<5
Silicon Dioxide
No
SECTION II - PHYSICAL DATA
BOILING POINT
>500
°F °C
oF
FF
SPECIFIC GRAVITY (H
2
O=1)
1.04
PERCENT VOLATILE BY VOLUME (%)
N.E.
SOLUBILITY IN WATER
Moderate
pH =
6.5 - 8.0
PERCENT SOLID BY
WEIGHT (%)
100
APPEARANCE AND ODOR
Gray solid paste, mild odor
IS MATERIAL: LIQUID SOLID GEL
GAS PASTE
POWDER
SECTION III - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT
310 F
method used
C.O.C
FLAMMABLE LIMITS
LEL
UEL
N.E.
N.E.
EXTINGUISHING MEDIA
Use dry chemical, carbon dioxide or foam.
SPECIAL FIRE FIGHTING PROCEDURES
Self-contained respiratory protection s hould be provided for fire fighters. Keep fire exposed
containers cool with water.
UNUSUAL FIRE AND EXPLOSION HAZARDS
Water or foam may cause a frothing reaction. (Water r eacts with zinc dust).
* None of the chemical raw materials contained in this formulation are considered hazardous under the Federal Hazard s Communication Standard 29 C. F. R 1910.1200
1
0
1
Flammability
HMIS Rating
Reactivity
Health
For a Material Safety
Data Sheet on Noalox
®
and all other products
visit us at
www.idealindustries.com
B-12 WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Tools & supplies
conduiT Benders
Rugged, steel construction for long-term durability
Baked-on blue enamel finish resists corrosion and enhances visibility
Convenient bending guide for offset bends
Exceptional, durable, materials for extra strength
Reinforced at stress points for longer life
Markings are raised and cast into the bender body on both sides
for easy visibility
Deeply serrated step helps prevent slippage when applying force
Grooved internal hook surface helps prevent conduit from slipping
Flat hook surface provides stable starting point
Desirable bending system
Withstands a lifetime
of heavy use
Ductile iron material is
stronger than malleable
iron or aluminum
Lightweight aluminum
for easy handling
Strong enough for
every day use
Conduit Benders
Handles For Benders
Ductile Iron Aluminum
Conduit Type and Size Cat. No.
1/2 in. EMT 74-001
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-002
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC 74-003
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC 74-006
Ductile Iron Head & Handle Complete
Ductile Iron Head Only
Conduit Type and Size Cat. No.
1/2 in. EMT 74-026
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-027
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC 74-028
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC 74-034
Conduit Type and Size Cat. No.
1/2 in. EMT 74-046
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-047
Conduit Type and Size Cat. No.
1/2 in. EMT 74-031
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-032
Aluminum Head & Handle Complete
Aluminum Head Only
Handles for Ductile Iron Handles for Aluminum
Conduit Type and Size Cat. No.
1/2 in. EMT 74-019
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-019
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC 74-020
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC 74-021
Conduit Type and Size Cat. No.
1/2 in. EMT 74-019
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-019
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC 74-020
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC 74-021
Based on 2011
data available
from Epicor/
Vista.
B-13
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
Tools & supplies
Description
Qty./Pack
Cat. No.
12 in. x 18T Blades 10 35-271
12 in. x 24T Blades 10 35-272
12 in. x 32T Blades 10 35-273
12 in. x 18T Blades 100 35-262
12 in. x 24T Blades 100 35-263
12 in. x 32T Blades 100 35-264
Hickeys BenderBoot™
Heavy-Duty Hacksaw
Handles for Hickeys
Ergonomic Hacksaw
Pocket Bender Guide
Hacksaw Blades
Aluminum
hicKeys/hacKsaWs
Rugged, steel construction for long-term
durability
Baked-on blue enamel finish resists
corrosion and enhances visibility
Convenient bending guide for
offset bends
High-strength ductile iron construction
Grooved internal hook helps prevent conduit from slipping
Lifetime replacement guarantee
Convenient pocket-sized
reference guide
Includes simple, concise
bending techniques for
precision stubs, back-to-back,
offset and saddle bends
Exceptional, durable, heat treated
materials for extra strength
Reinforced at stress points for
longer life
Grooved internal hook surface
helps prevent conduit from slipping
Angled handle for easier
cutting
Blade can easily be
adjusted for flush cutting
Easy tensioning wing-nut
keeps blades tight for
straighter cuts
Cushioned ergonomic grip
for performance and
comfort
Includes 12 in. x 24T
bi-metal blade
Bi-metal blades provide
strength, flexibility and
longer life
Santoprene® tread and hand
grip provides support for
saddle and offset bends
Easy push-on assembly to
1/2 in. and 3/4 in. Bender
handles
Conduit Type and Size Hickey Only Cat. No.
1/2 in. EMT 74-010
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-011
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC 74-012
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC 74-013
Conduit Type and Size Cat. No.
1/2 in. EMT 74-019
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC 74-019
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC 74-020
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC 74-021
Description Cat. No.
Pocket Bender Guide P-100
Ductile Iron Hickeys
Description Cat. No.
BenderBoot™ 74-037
Description Cat. No.
Heavy-Duty Hacksaw 35-260
Description Cat. No.
Ergonomic Hacksaw 35-261
Use as conventional hacksaw or as jab saw to enlarge holes
Rugged frame provides lightweight rigidity and exceptional
control
Stores up to nine extra blades
Blades can be adjusted to 55° angle for flush cutting and
tensioned to 25,000 psi
Includes 12 in. x 24T
bi-metal blade
Santoprene® is a registered trademark of Exxon Mobil.
B-14
Tools & supplies
pulling supplies
Valu-Line™ Pull-Line
Powr-Fish® Pull-Line
Powr-Fish® Pull-Line
White with blue tracer
for easy identification
Continuous-fiber polyline
great for blowing
directly into conduit
Will not rot or mildew
Can be left in
conduit for
future use
White with gray tracer for
easy identification
Continuous-fiber polyline
great for blowing directly
into conduit
Will not rot or
mildew
Can be left in
conduit for
future use
White with red tracer for
easy identification
500 lb. tensile, our highest
tensile-rated pull-line
Continuous-fiber
polyline great for
blowing directly
into conduit
Will not rot
or mildew
Can be left in
conduit for future
use
Description
Tensile Strength
Cat. No.
Valu-Line™ Pull-Line – 6,500 ft. (bucket) 190 lbs. 31-338
STANDARD
Duty
EXTRA-HEAVY
Duty 500#
Description
Tensile Strength
Cat. No.
Powr-Fish® Pull-Line – 2,200 ft. (bucket) 500 lbs. 31-344
Description Tensile Strength Cat. No.
Powr-Fish® Pull-Line – 6,500 ft. (bucket) 210 lbs. 31-340
Powr-Fish® Pull-Line – 500 ft. (canister) 210 lbs. 31-348
HEAVY
Duty
3-in-1 Premise MULETAPE®
Reduces installation time
and saves money on
premise jobs
Thread, measure and pull
with single product
Imprinted with sequential
footage or meter markings
Fewer installation steps,
significant material and
labor savings
Description
Pulling
Strength
Tape
Width Length
Cat.
No.
3-in-1
Premise
MULETAPE®
400 lb. 1/4 in. 4,500 ft./
bucket 31-314
1,800 lb. 1/2 in. 1,300 ft./
bucket 31-315
MULETAPE® is a registered trademark of NEPTCO.
THREE
functions in
ONE
Pro-Pull™ Rope
Low-friction polypropylene rope
slides easily through conduit
Non-sliver surface
can be handled
without gloves
Will not rot or
mildew
Rugged, lightweight
construction
Description
Tensile Strength
Cat. No.
1/4 in. x 250 ft. Reel 1,125 lbs. 31-839
1/4 in. x 600 ft. Reel 1,125 lbs. 31-840
1/4 in. x 1,000 ft. Reel 1,125 Ibs. 31-841
3/8 in. x 250 ft. Reel2,430 lbs. 31-844
3/8 in. x 600 ft. Reel2,430 lbs. 31-845
3/8 in. x 1,200 ft. Reel2,430 lbs. 31-846
1/2 in. x 250 ft. Reel3,780 lbs. 31-849
1/2 in. x 600 ft. Reel3,780 lbs. 31-850
1/2 in. x 1,200 ft. Reel3,780 Ibs. 31-851
5/8 in. x 600 ft. Reel5,580 Ibs. 31-853
5/8 in. x 1,200 ft. Reel5,580 Ibs. 31-854
3/4 in. x 300 ft. Reel7,650 lbs. 31-855
3/4 in. x 600 ft. Reel7,650 lbs. 31-856
3/4 in. x 1,200 ft. Reel7,650 lbs. 31-857
† Eye splice on working end.
WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
B-15
Tools & supplies
pulling supplies
Conduit Measuring Tape Line Packages
Foam Carriers
3-in-1 Premise MULETAPE®
Pro-Pull™ Rope
Provides quick and
accurate measurement of
conduit runs
Easy-to-read markings in
sequential one-foot
increments
160 lb. tensile strength
Pulls rope through
raceways without
stretching
Dispenser features
built-in cutter, handle,
non-skid base and
adjustable reel tension
Will not rot or mildew
Description Cat. No.
Conduit Measuring Tape – 3,000 ft. 31-347
Attach to a suitable line to serve as a piston – clears out
water or debris as they travel through conduit
Durable foam construction for repeated use and long life
For use with any type of blower or vacuum system
One-piece pull line and foam tip unwind as they move
through conduit
One-piece construction for faster, easier use with no knots
or foam carriers to retrieve
Line tensile strength of 17 lbs.
For use with any type of blower or vacuum system
Description Color Qty. Cat. No.
Line Package, 1/2 in. x 75 ft. Red 10/bag 31-472
Line Package, 1/2 in. x 150 ft. Red 10/bag 31-473
Line Package, 3/4 in. x 200 ft. Yellow 5/bag 31-475
Line Package, 3/4 in. x 300 ft. Yellow 5/bag 31-476
Line Package, 3/4 in. x 450 ft. Yellow 5/bag 31-477
Line Package, 1 in. x 200 ft. White 5/bag 31-479
Line Package, 1 in. x 300 ft. White 5/bag 31-480
Line Package, 1 in. x 450 ft. White 5/bag 31-481
Description
Qty.
Cat. No.
1/2 in. Foam Carrier 5/bag 31-466
3/4 in. Foam Carrier 5/bag 31-467
1 in. Foam Carrier 5/bag 31-468
1-1/4 in. Foam Carrier 3/bag 31-469
1-1/2 in. Foam Carrier 2/bag 31-470
2 in. Foam Carrier 1/bag 31-471
2-1/2 in. Foam Carrier 1/bag 31-322
3 in. Foam Carrier 1/bag 31-323
3-1/2 in. Foam Carrier 1/bag 31-324
4 in. Foam Carrier 1/bag 31-325
5 in. Foam Carrier 1/bag 31-326
6 in. Foam Carrier 1/bag 31-327
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
B-16 WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Tools & supplies
Wire sTrippers
accessories
Ergonomic handles with Santoprene®
grip and Thumb Valley make this the
premier wire stripper in the market.
45-125
45-121
45-120
45-124
45-123
45-417
45-416
45-415
45-418
45-618
45-615
45-716
45-715
45-718
45-915
45-918
#45-600’s #45-700’s #45-900’s
#45-100’s #45-400’s
T®-Stripper Wire Stripper
Reflex™PremiumT®-Stripper Wire Stripper
Reflex™ Super T®-Stripper Wire Stripper
Kinetic™ Super Wire Stripper
Kinetic™ Reflex™ T®-Stripper Wire Stripper
The ergonomic design and patented
Santoprene® grip wicks away perspiration
and reduces muscle fatigue. The Thumb
Valley guide and precision stripping holes
promote the highest accuracy in the industry.
Designed for total-comfort and wire stripping.
Ergonomic handles fit an electrician’s natural
grip and reduces hand fatigue. Textured, slip-
resistant sleeves cushion thumb and fingers.
The ergonomic design with curved handles
reduces wrist fatigue. Features 6/32 and
8/32 self-chasing, bolt cutting holes and a
locking pawl for safe storage.
Straight
Handles
Extended
Textured
Ergo Handles
Locking Pawl
Bolt Cutting
Extended
Textured
Comfort
Ergo Handles
Thumb Valley
Protection
Pocket Locket
Locking Hasp
Shear Cut
Bolt Cutters
Santoprene®
Curved
Handles
Thumb Valley
Protection
Pocket Locket
Locking Hasp
Shear Cut
Bolt Cutters
Santoprene®
Ergo Handles
The industry standard for almost 50 years.
Compact, lightweight and easy to use. Features
precision-ground, knife-type blades, built-in
looping holes, wire cutters and a convenient
plier nose.
T®-Cutter
14 16 18 20 22 24
16 18 20 22 24 26
24 26 30 3228
12 14 16 18 20
810 12 14 16
10 12 14 16 18
6 8 10 12 14
12 14 16 1810
810 12 1614
24 26 28 30
3230282624222018161412108
282624222018161412106
22
Solid StrandedHole Size StrandedSolidStrandedSolidStrandedSolidStrandedSolid
30
T®-Stripper Wire Stripper Selection Guide
Invented and manufactured
at our Sycamore, Illinois facility,
the T ®-Stripper Wire Stripper
line is the leading brand name
in the world.
Santoprene® is a registered trademark of Exxon Mobil.
Based on 2011
data available
from Epicor/
Vista.
B-17
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
Tools & supplies
Wire sTrippers
Engineered to strip every wire right!
Kinetic™ Super
Wire Strippers
Kinetic™ Reflex™
T®-Stripper Wire Strippers
Reflex™ Super
T®-Stripper Wire Strippers
Reflex™ Premium
T®-Stripper Wire Strippers
Ergonomic design for
maximum comfort
Curved handles reduce
wrist fatigue
Sleeves extend to stripping
head to cushion thumb
and fingers
Textured, no-slip sleeves
provide a sure, easy grip
6/32 and 8/32 self-chasing screw-cutting holes
• Lockingpawlforsafestorage
• Ergonomicdesignformaximumcomfort
• Curvedhandlesreducewristfatigue
Sleeves extend to stripping head to cushion thumb
and fingers
Textured sleeves with extra cushioning for added comfort
Non-slip Santoprene®
textured grips
Plier nose for holding
and twisting wires
Slide lock for safety and
storage
Thumb and finger valley
makes stripping easier
and more accurate
Shear-Cut™ bolt cutters
Non-slip Santoprene®
textured grips and thumb
rest
Plier nose for holding
and twisting wires
Slide lock for safety and
storage
Thumb and finger valley
makes stripping easier
and more accurate
Shear-Cut™ bolt cutters
Description Solid Stranded Cat. No.
Kinetic Super Wire
Stripper 10-18 12-20 45-715
14-24 16-26 45-716
6-14 8-16 45-718
Description Solid Stranded Cat. No.
Reflex™ Premium
T®-Stripper Wire
Stripper
10-18 12-20 45-415
14-24 16-26 45-416
22-30 24-32 45-417
6-14 8-16 45-418
Reflex™ Premium T®-Stripper – Metric 0.5mm2-4.0mm245-425-341
Description Solid Stranded Cat. No.
Kinetic™ Reflex™
T®-Stripper Wire
Stripper
10-18 12-20 45-915
6-14 8-16 45-918
Description Solid Stranded Cat. No.
Reflex™ Super
T®-Stripper Wire
Stripper
8-16 10-18 45-615
8-14 8-16 45-618
Reflex™ Super
12/2 & 14/2
NM Cable
T®-Stripper
Wire Stripper
12-2 and
14-2 45-621
Santoprene® is a registered trademark of Exxon Mobil. Santoprene® is a registered trademark of Exxon Mobil.
B-18 WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Tools & supplies
Wire sTrippers
T®-Stripper Wire Strippers
Lil’ Ripper Stripper™
Reflex™ Super T®-Stripper
Wire Stripper
NM Cable T®-Stripper
Wire Strippers
NM Cable Dual-Hole T®-Stripper Wire Stripper
Romex® is a registered trademark of Southwire Company.
•
Form-ground, knife-type blades
for accurate, easy stripping
without nicking insulation
Built-in wire cutter and
looping holes
•
Convenient plier nose for
extra gripping strength
•
Laser-etched wire gauge
for easy-to-read visibility
•
Spring-loaded automatic
opening
•
Corrosion-resistant,
black oxide finish
•
Tough steel
construction
•
Stripping holes for stripping two
2 AWG or two 14 AWG wires
simultaneously
•
Ability to strip both
conductor wires of
NM cable at one time
•
Easy, one-step stripping of outer
jacket of NM cable — no slitting
required
•
Versatility to strip, cut
and loop conductor
wires with precision
and ease
•
Stripping holes for 12 or 14 AWG solid wire
•
Locking pawl for safe storage
•
Rips Romex® wire outer
jacket cleanly and quickly
•
Clips outer sheathing to
remove excess Romex®
wire jacket
•
Strips inner conduit wires
•
Looping holes loop wire
for screw-on connections
•
Twist-Assist™ tightens most
popular sizes of winged
twist-on connectors
•
Injection molded elastomer grip provides
a comfortable, slip resistant grip
•
Strip length measuring scale allows for
quick and easy measurements
•
Conveniently fits in your pocket
6/32 and 8/32 self-chasing screw-cutting holes
Locking pawl for safe storage
Ergonomic design for maximum comfort
• Curvedhandlesreducewristfatigue
Sleeves extend to stripping head to cushion thumb and fingers
Textured sleeves with extra cushioning for added comfort
Description Cat. No.
14/2 NM Cable T®-Stripper Wire Stripper 45-248
12/2 NM Cable T®-Stripper Wire Stripper 45-249
Description Cat. No.
Lil’ Ripper Stripper™ 45-025
Description Solid Stranded Cat. No.
Reflex™ Super 12/2 &
14/2 NM Cable
T®-Stripper Wire
Stripper 12-2 and
14-2 45-621
Description Wire Range Cat. No.
Premium T®-14
T®-Stripper
Wire Stripper 12 or 14 AWG
solid 45-247
Description Solid Stranded Cat. No.
T®-5 T®-Stripper Wire Stripper 10-18 12-20 45-120
T®-6 T®-Stripper Wire Stripper 14-24 16-26 45-121
T®-7 T®-Stripper Wire Stripper 22-30 24-32 45-125
T®-8 T®-Stripper Wire Stripper 6-14 8-16 45-124
T®-Stripper Wire Stripper – Metric 0.75-6mm245-120-341
T®-Stripper Wire Stripper – Metric 0.5-4mm245-125-341
CheCk out
the demo
video
B-19
1-800-435-0705 CUSTOMER ASSISTANCE WWW.IDEALINDUSTRIES.COM
Tools & supplies
Wire sTrippers/cuTTers
V-Notch Stripper
Combo Tool
Data T®-Cutter Wire Cutter
T®-Cutter Wire Cutter
7-in-1 Stripper
Multi-Crimp Strip Tool
Reflex™ Super T®-Stripper
Wire Stripper
Cuts copper or aluminum wire, solid or stranded
Rotating cam wheel adjusts to strip 10-24 AWG wire
Looping holes for solid wire
Locking hasp
Versatile, seven-function tool features precision-ground
stripping blades, cushioned grips and plier nose
Strips 8–16 AWG solid and 10–18 AWG stranded wire
Crimps bare and insulated terminals for 10–22 AWG wire,
RG-59 coax connectors and 7 to 8mm auto ignition
connectors
Cuts unhardened wire, bolts and screws (4-40, 6-32, 8-32,
10-24 and 10-32) and reforms threads
Cuts stranded, solid, NM wire and U.F. wire to 8 AWG
Reams and de-burrs conduit
Gauges and loops wire
Description Cat. No.
V-Notch Stripper 45-101
Description Cat. No.
7-in-1 Stripper 45-777
• Cutsroundcommunication
cable and maintains cable
geometry for better cable
performance
• Cutsmulti-paircableupto
.500 in. (12.7mm) and
coaxial cable up to RG-9/U
• Suitableforsoftcables
(not ACSR)
• Steelreinforcedcenter
conductors can be trimmed
with bolt cutting holes
• Cushionedcomfortgriphandles
• Lockinglatchkeepstoolclosedinpouch
Convenient, four-function tool features precision-ground
stripping holes and knife-to-anvil cutting blades
Crimps bare and insulated terminals
Strips 8–20 AWG solid and 10–22 AWG stranded wire
Cuts unhardened bolts (4-40, 6-32, 8-32, 10-24 and 10-32)
and reforms threads
Cuts wire
Crimps insulated and non-insulated wires
Cuts bolts
Strips 10-22 AWG wire
Description Cat. No.
Data T®-Cutter 45-074
Description Cat. No.
Combo Tool 30-428
Description Cat. No.
Multi-Crimp Strip Tool 45-778
•
Hardened steel, sheer-type blades
Spring-loaded automatic opening
• Convenientpliernoseforextragrippingstrength
• Corrosion-resistant,blackoxidefinish
Tough steel construction
Locking tab keeps spring in place
Description Wire Range Cat. No.
T®-Cutter
Wire Cutter Up to 1/2 in. O.D. fine-stranded wire
and 10 AWG solid wire 45-123
Cable Ripper
Slits Romex® wire sheathing before stripping wires
Quick, clean and easy end or mid-run removal of jacket
Convenient built-in wire gauge
Description Cat. No.
Side Entry
Cable Ripper 45-118RS
Romex® is a registered trademark of Southwire Company.
B-20 WWW.IDEALINDUSTRIES.COM 1-800-435-0705 CUSTOMER ASSISTANCE
Tools & supplies
In today’s cutting-edge electronic production and
assembly operations, the T®-Cutter Lite is a “must-have.”
Stranded or solid, copper or aluminum, this wire cutter
cuts cleanly and accurately.
Knife-type blade provides a shear-type cut
Lightweight, compact design
Perfect for copper and aluminum wire
Description Cat. No.
T®-Cutter Lite
Wire Cutter 45-260
T®-Cutter Lite Wire Cutter
Grip-N-Strip™ End Stripper
Coax Strip and Crimp Tool
Round Cable Slitting and
Ringing Tools
Precision, form-ground
stripping holes remove
outer jacket and
insulation from RG-59
and RG-6 coaxial cable
Durable blades cut
copper-coated steel
conductors
Three crimping nests for
crimping F-connectors
and ring terminals
Self-adjusting stripping blades automatically select proper
position
Strips 12 AWG solid to 20 AWG stranded PVC insulated wire
Strip-length gauge
Cuts up to 12 AWG solid wire
Lightweight, ergonomic design reduces user fatigue
Reinforced fiberglass construction
Hardened steel blades for extra strength and longer life
Description Cat. No.
Coax Strip &
Crimp Tool 30-433
Coax Strip & Crimp Tool w/ten RG-6 F-Connectors 30-433F
Underground Feeder (UF)
Cable Stripper
Self-adjusting stripping blades automatically select proper
position
Strips 12/2 AWG solid to 14/2 AWG Underground Feeder
(UF) Cable
Strips Twin and Earth cable
Open-throat construction allows unlimited strip length
Neatly removes outer cable sheath and inner wire
sheathing to desired lengths
Lightweight, ergonomic design reduces user fatigue
Wire cuTTers/sTrippers
Description Cat. No.
Underground Feeder
Cable Stripper 45-235
Description Cat. No.
Grip-N-Strip™
End Stripper 45-227
Cuts around cable jacket as well as slits the length of
jacket for easy removal
Use with single or multiple conductor cable up to 1.75 in.
O.D.
Blade adjusts for jacket thicknesses up to .125 in.
Spare blade in handle base
Description Cat. No.
Cable Stripper for
1/4 in. to 3/4 in. O.D. 45-128
Cable Stripper for
3/4 in. to 1-1/2 in. O.D. 45-129
Replacement Blades for 45-128 and 45-129 (2/pkg.) L-7486
Stripmaster® Wire Strippers
Description Cat. No.
Stripmaster® Wire Stripper, 10-22 AWG (Boxed) 45-092
Stripmaster® Wire Stripper, 10-22 AWG (Clamshell) 45-292
Stripmaster® Wire Stripper, Coax RG-6 45-262
See Section C for complete Stripmaster® Wire Stripper line.
One-step stripping
enhances productivity
Spring-action motion
increases leverage
and reduces operator
fatigue
Precision-ground,
knife-type blades
provide clean,
accurate stripping
B-21
1-800-435-0705 Customer AssistAnCe WWW.iDeALinDustries.Com
Tools & supplies
pliers
Pliers
n
Custom hardened chrome
vanadium steel for durability
n
Textured slip-resistant grip
n
Slip Joint Pliers have a flush rivet
design for easier access
n
Dipped comfort-grip handles
for a secure grip
n
Permanently bonded, double insulated
handles for added safety
n
IDEAL insulated pliers are the first UL tested
and listed insulated pliers available
Smart-Grip Pliers
Dipped Grip Pliers
Insulated Grip Pliers
B-22 WWW.iDeALinDustries.Com 1-800-435-0705 Customer AssistAnCe
Tools & supplies
Long Nose
Side-Cutting Pliers
Drop-forged, high-carbon steel construction withstands
toughest applications
Knife-to-anvil blades never need resharpening
Cuts hardened wire, bolts and ACSR
Laser-hardened blades and serrated jaws for long-term
durability
High-leverage design provides 40% more cutting power
Unique reverse rivet protects smooth action of plier
movement
Vinyl-coated, comfort-grip handles for a
secure grip
Description (Smart-Grip™ Plier Handles) Cat. No.
9-1/4 in. New England nose
high-leverage w/fish tape
puller
35-3012
9-1/4 in. New England nose
high-leverage w/crimping die 30-3430
Description (Dipped Handles) Cat. No.
9-1/4 in. New England nose
high-leverage w/fish tape
puller
35-012
9-1/4 in. New England nose high-leverage w/crimping die 30-430
Long-Nose Pliers
Narrow profile head designed for working in tight areas
Serrated jaws provide secure gripping surface
Drop-forged, high-carbon steel construction
Knife-to-anvil blades never need resharpening
Laser-hardened blades cut hardened wire, bolts
and ACSR
Vinyl-coated, comfort-grip handles for a secure
grip
Description (Smart-Grip™ Plier Handles) Cat. No.
8-1/2 in. Long Nose w/Cutter
35-3038
Description (Dipped Handles) Cat. No.
6 in. Long Nose w/Cutter 35-036
7-3/4 in. Long Nose w/Cutter 35-037
8-1/2 in. Long Nose w/Cutter 35-038
8-1/2 in. w/Cutter & stripping
holes for 12 & 14 AWG wire 35-039
Tongue & Groove Pliers
Reinforced flange protects against breakage
Drop-forged, high-carbon steel construction
Vinyl-coated, comfort-grip handles for a
secure grip
Description (Smart-Grip™ Plier Handles) Jaw Opening
(Inches) Cat. No.
10 in. Tongue &
Groove Pliers 235-3430
Description (Dipped Handles) Jaw Opening
(Inches) (Inches)
10 in. Tongue &
Groove Pliers 235-430
12 in. Tongue &
Groove Pliers 2-1/4 35-440
Cable Cutters
Drop-forged, high-carbon steel construction
Precision-ground, hardened cutting edges provide accurate
cuts without cable distortion
Designed for maximum leverage with minimum effort
Cuts 2/0 copper and 4/0 aluminum (not for use
on ACSR)
Vinyl-coated, comfort-grip handles
Description (Smart-Grip™ Plier Handles) Cat. No.
9-1/2 in.
Cable Cutter 35-3052
Description (Dipped Handles) Cat. No.
9-1/2 in.
Cable Cutter 35-052
Side-Cutting
B-23
1-800-435-0705 Customer AssistAnCe WWW.iDeALinDustries.Com
Tools & supplies
Cable Cutter
Tongue & Groove
Diagonal-Cutting Pliers
Split-Joint Pliers
Drop-forged, high-carbon steel construction withstands
toughest applications
Knife-to-anvil blades never need resharpening
Laser-hardened blades cut hardened wire, bolts and ACSR
Vinyl-coated, comfort-grip handles for a secure grip
High-leverage design provides 40% more cutting power
•
Models 35-029 and 35-3029 feature a convenient
angled head for hard-to-reach areas and
rocking out nails
Two position slip joints fit large and small jobs
• Dippedcomfort-griphandlesforasecuregrip
• Flushrivet
Description (Smart-Grip™ Plier Handles) Cat. No.
8 in. High-leverage
Diagonal 35-3028
8 in. High-leverage Diagonal w/angled head 35-3029
Description (Dipped Handles) Cat. No.
8 in. High-leverage
Diagonal 35-028
8 in. High-leverage Diagonal
w/angled head 35-029
Multi-Crimp Tools
Crimps bare or insulated terminals and splices
on 10–22 AWG wire
Knife-to-anvil blades never need resharpening
Excellent leverage for easy crimping and cutting
Drop-forged, high-carbon steel construction
Vinyl-coated handles provide a solid,
comfortable grip
Description (Smart-Grip™ Plier Handles) Cat. No.
9-3/4 in. Multi-Crimp
Tool 30-3429
Description (Dipped Handles) Cat. No.
9-3/4 in. Multi-Crimp
Tool 30-429
Description Cat. No.
6 in. Slip Joint
Pliers 35-100
Description (Dipped Handles) Cat. No.
8 in. Slip Joint
Pliers 35-102
Crimp Tool
Crimps all IDEAL crimp sleeves
Excellent leverage for right-angle, double-indent crimps
Cuts and twists wire
Vinyl-coated handles provide a solid,
comfortable grip
Description (Smart-Grip™ Handles) Cat. No.
10-1/4 in. Crimp
Tool 30-425
Tenite® Grips
 FitsLASERedge™andWireMan™
Pliers
Not insulated from electrical shock
Boil in water to soften for easy
installation onto handles
Description Cat. No.
Replacement grips for 8 in. or 9 in. pliers (one pair) 35-008
Diagonal Crimper
pliers
Tenite® is a registered trademark of Eastman Chemical Company.
For all your plier needs...
B-24 WWW.iDeALinDustries.Com 1-800-435-0705 Customer AssistAnCe
Tools & supplies
pliers
Side-Cutting Pliers
Custom chrome vanadium steel for durability
High leverage pivot requires less cutting force
Sharp, knife-to-knife blades for easy cutting
Induction hardened teeth for long life
Cross-hatched jaws so wires won’t slip when
pulling
Ergonomic handles for comfortable, all-day use
Description (Smart-Grip™ Plier Handles) Cat. No.
9-1/4 in. Side-Cutting
Pliers 35-4012
9-1/4 in. Side-Cutting Pliers
w/crimp and fish tape
puller
30-4430
Description (Dipped Handles) Cat. No.
9-1/4 in. Side-Cutting
Pliers 35-5012
9-1/4 in. Side-Cutting
Pliers w/crimp and
fish tape puller
30-5430
Tongue & Groove Pliers
Custom chrome vanadium steel for durability
Ergonomic handles for comfortable, all-day use
Description (Smart-Grip™ Plier Handles) Cat. No.
10 in. Tongue & Groove Pliers 35-4430
Description (Dipped Handles) Cat. No.
10 in. Tongue & Groove Pliers 35-5430
Cable Cutters
Custom chrome vanadium steel for durability
High-leverage pivot requires less force
Sharp, knife-to-knife blades for easy cutting
Induction hardened teeth for long life
Ergonomic handles for comfortable, all-day use
Description (Smart-Grip™ Plier Handles) Cat. No.
9 in. 2/0 Cable Cutter 35-4052
Description (Dipped Handles) Cat. No.
9 in. 2/0 Cable Cutter 35-5052
Diagonal Cutting Pliers
Custom chrome vanadium steel for durability
High leverage pivot requires less cutting force
Sharp, knife-to-knife blades for easy cutting
Induction hardened teeth for long life
Ergonomic handles for comfortable, all-day use
Description (Smart-Grip™ Plier Handles) Cat. No.
8 in. Diagonal-Cutting
Pliers 35-4028
8 in. Diagonal-Cutting
Pliers w/angled head 35-4029
Description (Dipped Handles) Cat. No.
8 in. Diagonal-Cutting Pliers 35-5028
8 in. Diagonal-Cutting Pliers
w/angled head 35-5029
Long-Nose Pliers
Custom chrome vanadium steel for durability
High leverage pivot requires less cutting force
Sharp, knife-to-knife blades for easy cutting
Induction hardened teeth for long life
Cross-hatched jaws so wires won’t slip when
pulling
Ergonomic handles for comfortable, all-day use
Description (Smart-Grip™ Plier Handles) Cat. No.
6 in. Long-Nose Pliers
35-4036
8 in. Long-Nose Pliers
35-4038
Description (Dipped Handles) Cat. No.
6 in. Long-Nose Pliers
35-5036
8 in. Long-Nose Pliers
35-5038
B-25
1-800-435-0705 Customer AssistAnCe WWW.iDeALinDustries.Com
Tools & supplies
pliers
DiagonalSide-Cutting Long Nose Tongue & Groove Cable Cutter Crimper
Multi-Crimp Tools
Custom chrome vanadium steel for durability
High-leverage pivot requires less force
Ergonomic handles for comfortable, all-day use
Cuts, crimps and splices 10 – 22 AWG wire for
insulated and non-insulated crimp connectors
LaserEdge™ Dipped Grips
LaserEdge™DippedGripsaresmooth
and easy to wipe clean.
Smart-Grip™
OurSmart-Grip™pliersprovide
the latest innovation in material,
comfort design, durability and long
life.
WireMan™ Dipped Grips
WireMan™DippedGripsaretextured
for comfort and control.
Description (Smart-Grip™ Plier Handles) Cat. No.
9-1/4 in. Multi-Crimp Tool 30-4429
9-1/4 in. Multi-Crimp Tool -
Bare Terminals 35-4431
Description (Dipped Handles) Cat. No.
9-1/4 in. Multi-Crimp Tool 30-5429
9-1/4 in. Multi-Crimp Tool -
Bare Terminals 35-5431
Color-coding and
FastFinder™ letter
markers on
SmartGrip™
handles provide
quick tool
identification,
even by touch!
IDEAL Grips
B-26 WWW.iDeALinDustries.Com 1-800-435-0705 Customer AssistAnCe
Tools & supplies
Misc. Hand Tools
™ Cutter
Handles all common BX,
MCAP®,MCandFlex
cables
Blade cuts armor without
damage to internal
conductors
Splices cleanly through
casings with only a
few turns
Handle knob stores up
to six replacement
blades
Description Qty. Cat. No.
Rotary Armored
Cable Cutter 35-782
Replacement
blades 5/pack 35-781
1/pack 35-781-1
Crimp Tool
Mechanical Indentor and
Crimp Tool
Crimps all IDEAL crimp sleeves
Excellent leverage for right-angle, double-indent crimps
Cuts and twists wire
Vinyl-coated handles provide a solid,
comfortable grip
Use with aluminum (6 AWG to 4/0) and copper
(8 AWG to 250 KCMIL) wires
Adjustable crimping nests with clearly marked gauges
• Lightweightandeasytooperate
Rugged cast steel construction for long-term durability
Connections are UL Listed when using this tool with IDEAL
Non-Insulated Terminals (#8 - #4 AWG).
Description Cat. No.
Mechanical
Indentor 88-843
Description Cat. No.
10-1/4 in.
Crimp Tool 30-425
BUCHANAN 4-Way
Crimp Tool
Ratchet Crimp Tool
Aviation Tin Snips
Crimps insulated or bare terminals and splices on
10–22 AWG wire
Ratchet action prevents release prior to crimp connection —
helps ensure uniform crimps
Vinyl-coated handles provide a solid, comfortable grip
Patented design ensures even compression and reliable
connections
Spring-loaded, cam-actuated plungers
 Fingertipadjustmentfordifferentconnectorsizes
• Cutsstraight,leftandright,withonetool!
Chrome-molybdenum steel forged blades for greater
strength and durability
Serrated edges provide a stable hold when cutting
Labor-saving design for easier cutting
Comfortable non-slip dual
durometer grips
Description Cat. No.
Four-Way
Crimp Tool C24
Description Cat. No.
Ratchet Crimp Tool
83-001
Description Cat. No.
Aviation Tin Snips
35-001
MCAP® is a registered trademark of Southwire Company.
B-27
1-800-435-0705 Customer AssistAnCe WWW.iDeALinDustries.Com
Tools & supplies
Misc. Hand Tools
Adjustable Wrenches
Electric Engraving Tools
30’ Automatic Blade Lock
Measuring Tape with
Magnetic-Tip
IDEAL Wipes™
The Multi-Purpose Towel
25’ Automatic Blade Lock
Measuring Tape
Drop-Forged Hammer
Narrow profile head
reaches into tight spaces
Tight tolerance on
thumbscrew won’t loosen
or wobble with use
Extra wide jaw capacity
with standard and metric
markings
 Forgedsteelconstruction
Tempered and hardened
for lifetime service
Description
Jaw Capacity
Cat. No.
6 in. Adjustable
Wrench 7/8 in. 35-019
8 in. Adjustable
Wrench 1-1/8 in. 35-020
10 in. Adjustable
Wrench 1-5/16 in. 35-021
Pre-moistened wipes
require no water
Cleans dirt, grease, lube
and grime
Durable fabric scrubs
without tearing
Infused with natural
handmoisturizersand
Vitamin E
Orange citrus scent
Description Cat. No.
IDEAL Wipes™,
12 in. x 9 in.
(82/can) 38-500
One-piece drop-forged, tempered-steel polished
head and handle
Long, straight claws simplify removal of electrical fixtures
Comfortable, perforated anti-vibe grips
Elongated neck for hitting inside boxes
Description Cat. No.
18 oz. x 12-1/2 in.
Drop-Forged Handled
Hammer 35-210
Blade automatically stays
out when extended
Push button for smooth
blade retraction
Comfortable,
shock-resistant
rubber grip
Double-sided
tape
Description Cat. No.
Auto-Lock™ Tape Measure - 25 ft. 35-242
Magnetic-tipped end hook
Double-sided Tape
Description Cat. No.
Mag-Tape™ Tape Measure - 30 ft. w/Magnetic Tip 35-238
Low-cost, industrial-quality marker quickly and easily
engraves metal, glass, stone, ceramics, plastics, hard
rubber, wood and many other hard materials
Unique design reduces bouncing and provides
smooth, easy writing
Operates at 7,200 strokes per minute
•
Stroke adjusts to vary depth of mark
•
Includes carbide-tipped point for normal markings
•
Diamond point available for engraving extra-hard materials
(50 to 64 Rockwell, scale C)
Description Cat. No.
Engraver w/carbide-tipped point — 120V, 60 Hz 11-111
Engraver w/carbide-tipped point & 3-conductor grounded
cord & plug — 120V, 60 Hz 11-113
Carbide-Tipped replacement point 11-200
Diamond replacement point 11-201
30’ length for commercial
conduit installation use
Measurement marks on
both sides of tape
Strong magnets on tip for
one-person measurement
Blade automatically stays
out when extended
Push button for smooth blade retraction
Comfortable, shock-resistant rubber grip
B-28
Tools & supplies
cable cuTTers
Extremely versatile: fits almost any drill (12V minimum)
Cuts copper up to 2 in. diameter or 750 MCM or
aluminum up to 2 in. diameter or 1000 MCM
Heavy-duty gears and specially hardened blades for
professional quality
 Roundedbladedesignminimizescabledistortion
during cutting
No need to mess with battery packs or special chargers;
thistoolworkswiththedrillyoualreadycarry!
PowerBlade™ Cable Cutter
(Drill not included)
Folding handle for storage
Description Cat. No.
PowerBlade™ Cable Cutter 35-078
PowerBlade™ Replacement Handle K-8947R
PowerBlade™ Replacement Blades (pair) K-8906R
PowerBlade™ Replacement Torque Arm Assembly K-8909
PowerBlade™ Replacement Carrying Case K-8926
*Max. Jaw Opening - 2 in. Not for cutting steel or ACSR.
Rugged metal housing
Replaceable, hardened steel
blades ensure consistent cuts
and long-term durability
Contoured blade design
minimizes cable
distortion
Adjustable torque
arm holds drill in
place
Attaches to any cordless or
corded drill (12V minimum)
WWW.iDeALinDustries.Com 1-800-435-0705 Customer AssistAnCe
750 KCMIL Ratcheting Cable Cutter is designed to cut 750 KCMIL (MCM)
and smaller hard-drawn copper and aluminum cables
Hardened steel blades ensure consistent cuts and long-term durability
 Roundedbladedesignminimizescabledistortion
during cutting
Quick release mechanism simplifies
blade back-out
Locking mechanism keeps handles
closed for easy storage
Molded-in foot provides stability and
leverage when making
multiple cuts
B-29
Tools & supplies
cable cuTTers
Long-Arm Cable
Cutters
High strength forged blades for
ultimate durability
Precision-ground jaws make clean
cuts with minimal cable distortion
Replaceable blades
 Forcopperandaluminumonly.
Not designed for steel or ACSR.
Description
Length
Cat. No.
250 MCM Long-Arm Cable Cutter 14 35-031
500 MCM Long-Arm Cable Cutter 22 35-032
1000 MCM Long-Arm Cable Cutter 32 35-033
Replacement Head - 250 MCM (for 35-031) 35-031B
Replacement Head - 500 MCM (for 35-032) 35-032B
Replacement Head - 1000 MCM (for 35-033) 35-033B
CAUTION: Comfort-grip handles are not designed to for protection
against electrical shock. Do not use on live circuits.
Ratcheting Cable Cutter
Ratcheting Cable Cutter
Cuts hard drawn copper up to 400 KCMIL
(MCM) and soft copper, aluminum and multiple
conductor cable up to 600 KCMIL (MCM)
Hardened steel blades ensure consistent
cuts and long-term durability
 Roundedbladedesignminimizescable
distortion during cutting
Quick release mechanism simplifies blade
back-out
Locking mechanism keeps handles closed for
easy storage
Description Cat. No.
400 KCMIL (MCM) Ratcheting Cable Cutter* 35-056
Replacement blade (moveable side only) 35-085
*Max. Jaw Opening - 2 in. Not for cutting steel or ACSR.
Description Cat. No.
750 KCMIL (MCM) Ratcheting Cable Cutter* 35-053
Replacement blade (moveable side only) 35-057
*Max. Jaw Opening - 2 in. Not for cutting steel or ACSR.
Cuts up to 750 MCM
(380mm2) hard-drawn
copper
Hardened, long life
steel blades
Quick handle
release
Handle locking
mechanism
Comfort grip
handles
1-800-435-0705 Customer AssistAnCe WWW.iDeALinDustries.Com
High strength
ratcheting teeth
B-30 WWW.iDeALinDustries.Com 1-800-435-0705 Customer AssistAnCe
Tools & supplies
Torpedo Level
Center Punch
Cold Chisel
Wood Chisel
Hex-Key Sets
Utility Knife
Pocket Knives
8650 steel construction
Dual-durometer, slip-resistant grip
2-1/4 in. blade locks in position
High-carbon stainless steel blade construction for extra
strength and durability
Durable non-slip handle
Brass liners
Quick-change retractable
blade system — no
disassembly required
Built in pull-line cutter
Includes three blades in
storage compartment
Accurately start drilling holes on steel surfaces
One-piece construction
Hardened and tempered for long life
Used for cutting cold metals
One-piece construction
Hardened and tempered for long life
Makes fitting J-boxes to wood studs easier
Use by hand or mallet
Hardened and tempered for long life
9 in. aluminum frame with magnetic and V-grooved edges
Windows provide easy reading of plumb level and 45°
mitre in dim lighting
Three rare earth magnets for strong cling to conduit
Description Cat. No.
9 in. Torpedo
Level 35-205
Description Cat. No.
Center Punch
35-192
Description Cat. No.
Cold Chisel
35-187
Description Cat. No.
Wood Chisel
35-189
Description Cat. No.
4 in. handle w/nine 3-in. keys
(5/64 in., 7/64 in., 1/8 in., 9/64 in.,
5/32 in., 3/6 in., 7/32 in. & 1/4 in.)
35-146
5-1/4 in. handle w/five 5-in. keys (3/16 in., 7/32 in., 1/4 in.,
5/16 in. & 3/8 in. 35-147
Description Cat. No.
Utility Knife 35-300
Replacement blades - Universal (5/pack) 35-301
Description Cat. No.
Electrician’s Knife
w/spearpoint and
screwdriver blade
35-285
Hawkbill Knife
w/curved blade 35-286
Lineman’s Jack Knife
w/sheepfoot blade 35-287
Misc. Hand Tools
B-31
1-800-435-0705 Customer AssistAnCe WWW.iDeALinDustries.Com
Tools & supplies
Jab Saw
Heavy-Duty Hacksaw
Folding Saw Ergonomic Hacksaw
Mini Hacksaw
Hacksaw Blades
Ergonomic grip
Cushioned ergonomic grip for performance and
comfort
Rugged frame provides lightweight rigidity and exceptional
control
Stores up to nine extra blades
Blades can be adjusted to 55° angle for flush cutting and
tensioned to 30,000 psi
Includes 12 in. x 24T bi-metal blade
Angled handle for easier
cutting
Blade can easily be
adjusted for flush cutting
Easy tensioning wing-nut
keeps blades tight for
straighter cuts
Cushioned ergonomic
grip for performance and
comfort
Includes 12 in. x 24T bi-metal blade
Heavy-duty die
cast frame
Non-slip rubber comfort grip
Accepts all standard hacksaw blades
Bi-metal blades provide strength, flexibility and longer life
Light-weight, heavy-duty die cast construction
Ergonomic rubber comfort grip
Blade safely and conveniently folds down in handle
Accepts all standard 6 in. recip blades
Description Cat. No.
Jab Saw 35-275
Description Cat. No.
Folding
Saw 35-274
Description Cat. No.
Heavy-Duty Hacksaw 35-260
Description Cat. No.
Ergonomic
Hacksaw 35-261
Description Cat. No.
Mini Hacksaw 35-259
Description Qty./Pack Cat. No.
12 in. x 18T Blades 10 35-271
12 in. x 24T Blades 10 35-272
12 in. x 32T Blades 10 35-273
12 in. x 18T Blades 100 35-262
12 in. x 24T Blades 100 35-263
12 in. x 32T Blades 100 35-264
Misc. Hand Tools
Plunge-tip
design
Textured non-slip grip
Wallboard blade
Weighted head
provides superior
balance
B-32 WWW.iDeALinDustries.Com 1-800-435-0705 Customer AssistAnCe
Tools & supplies
screwdrivers
n
Top quality screwdrivers
designed especially
for the professional
electrician
n
Multi-functional drivers
that can tackle all your
fastening needs
n
Durable tools with
lifetime warranties
Screwdrivers
n
Made from rugged
S2M tool steel
n
All bits are 100%
made in the U.S.A.
n
Custom heat treated for
strength and durability
n
Cushioned-gripped
for comfort and
maximum torque
n
Custom tip blasted
for precise fit
n
Nickel Chrome
steel shank for
maximum strength
and durability
n
Tightens small fasteners easily and
accurately
n
Custom tip blasted for precise fit
n
Cushioned-gripped for comfort and
maximum torque
Specialty
Screwdrivers
Cushioned-Grip
Screwdrivers
Industrial
Screwdriver Bits
n
Long, hollow shanks handle
longer bolts
n
Cushioned-gripped for comfort
and maximum torque
Nutdrivers
Mini Cushioned-
Grip Screwdrivers
B-33
1-800-435-0705 Customer AssistAnCe WWW.iDeALinDustries.Com
Tools & supplies
Multiple bit
storage unit
Wire connector wrench prevents finger fatigue and gets in tight spots
• Allmetalratchet,pro-qua
lity, 28 tooth double action, twin-tooth ratchet
Premium screwdriver ratchet mechanism can handle high torque without failure
• 225lbs.oftorque(stronge
r than human wrist can torque)
Ergonomic, slip-free comfort grip
Multiple bit storage unit and wire-looping hole in handle
Includes: #1 Phillips, #2 Phillips, #3 Phillips, 3/16” Slotted, 1/4” Slotted, 5/16” Slotted,
#1 Square, #2 Square, #15 Star, #20 Star, #25 Star, #30 Star,
3/32” Hex, 1/8” Hex, 3/16” Hex, 5/32” Hex, 1/4” Nut,
5/16” Nut and 7/16” Nut
21-in-1 Twist-a-Nut™ Screwdriver
Description Cat. No.
21-in-1 Twist-a-Nut™ Screwdriver 35-688
Textured grip provides
excellent torque and resists
perspiration, water,
oil and chemicals
Six torsion bars provide
exceptional grip
Accu-Loop™ Wire
Looping Hole
Patented Wire-Nut® Wire
Connector Wrench accepts a wide
variety of connectors.
Accu-Loop™ Wire
Looping Holes
Accu-Loop™ Wire
Looping Holes make
perfect bends
every time!
Twist-a-Nut™ Screwdrivers &
Nutdrivers
Premium Ratchet
B-Cap® Wing-Nut®Wire-Nut®Twister®
Patented Wire-Nut® Wire Connector Wrench
accepts a wide variety of connectors.
(Lifetime warranty
excludes bits)
screwdrivers
CheCk out
the demo
video
B-34
screwdrivers
9-in-1 Ratch-a-Nut™
Screwdriver
7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver
Ratcheting Wire Connector
Wrench prevents finger
fatigue and gets in tight
spots
Premium screwdriver
ratchet mechanism can
handle high torque
without failure
Ergonomic, slip-free
comfort grip
 AcceptsTwist-a-Nut™
replacement bits
Includes: 1/4 in. and 3/16 in. Slotted, #1
& #2 Phillips, 1/4 in., 5/16 in., 7/16 in.
nutdrivers, ratcheting screwdriver end,
ratcheting wire connector wrench and
wire-looping hole in handle
Includes patented
Wire-Nut® Wire Connector
Wrench in handle to help
install twist-on wire
connectors
Includes wire-looping
hole in handle
Includes #1 & #2 Phillips,
1/4 in. & 3/16 in. Slotted,
1/4 in. & 5/16 in. Nutdriver
•
#35-909 includes #1 & #2 Square Recess in
place of #1 & #2 Phillips
Handle is interchangeable with conduit deburrer head
(#35-096) and 6-in-1 Tap Tool (#35-922)
Description Cat. No.
9-in-1 Ratch-a-Nut™
Screwdriver 35-988
(Lifetime warranty
excludes bits)
(Lifetime warranty
excludes bits)
Twist-a-Nut™ Pro
Electrician’s Screwdrivers
•
Convenient Wire-Nut®
Wire Connector Wrench
in end of handle
Wire-looping hole in
handle
Vapor-blasted tip
prevents plate chipping
Tough, chrome vanadium
steel shank
Precision ground tip
provides secure fit in
screw slot
Description Cat. No.
#2 x 6 in. Square 30-330
1/4 in. x 4 in. Slotted 30-331
#2 x 4 in. Phillips 30-332
1/4 in. x 6 in. Slotted Cabinet Tip 30-333
WWW.iDeALinDustries.Com 1-800-435-0705 Customer AssistAnCe
Tools & supplies
CheCk out
the demo
video
Description Cat. No.
7-in-1 Twist-a-Nut™
Screwdriver/Nutdriver 35-908
7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver with Square tip 35-909
Twist-a-Nut™
Screwdriver Demo
Video
5/16 Nutdriver
1/4 Nutdriver
#2 Phillips
#1 Phillips
3/16 Slotted
1/4 Slotted
Description Cat. No.
1/4 in. slotted – #2 Phillips 35-911
3/16 in. slotted – #1 Phillips 35-912
1/4 in. slotted – #2 Square 35-913
Replacement Tips
(for both Ratch-a-Nut™ and Twist-a-Nut™)
Description Cat. No.
3/16 in. slotted – #1 Square 35-914
#15 & #10 Star 35-915
B-35
1-800-435-0705 Customer AssistAnCe WWW.iDeALinDustries.Com
Tap Tools/deburrers
6-in-1 Twist-a-Nut™
Tap Tool
3-in-1 Twist-a-Nut™
Tap Tool
 Formsnewthreads,re-formsburredthreadsandcleans
out obstructions
Reversible, high-carbon tap with three clearly
 markedthreadsizesoneachend
Handle is interchangeable with 7-in-1
Screwdriver (#35-908) and Conduit
Deburrer (#35-083)
 Formsnewthreads,re-forms
burred threads and cleans out
obstructions
Reversible, high-carbon tap
with three clearly marked
 threadsizesoneachend
Handle is interchangeable
with 7-in-1 Screwdriver
(#35-908) and Conduit
Deburrer (#35-083)
Patented Wire-Nut® Wire Connector wrench in
handle helps install twist-on wire connectors
(Lifetime warranty
excludes bits &
blades)
Description Cat. No.
Twist-a-Nut™ Tapping Tool
includes: 6-32, 8-32 & 10-32
on one tapping side, 10-24,
12-24 & 1/4-20 on the other
35-922
Replacement collar
and six taps 35-923
Description Cat. No.
3-in-1 Tap Tool includes handle and three taps 35-412
Twist-a-Nut™ Conduit Wiring Kit
Includes