Lighting Science DFNA19CWV2120 LED Spec Sheet
2014-09-04
: Pdf 616685-Attachment 616685-Attachment 002421 Batch7 unilog
Open the PDF directly: View PDF 
.
Page Count: 2
ORDERING INFORMATION \\ DFN A19 WW V2 120
Family Product Color (CCT) Light Output Voltage Base
DFN Denity A19 A19 W27 Warm White 2700K V1 8.5W (40W Equivalent) 120 120 Volt (leave blank for E26 Base)
WW Warm White 3000K V2 13.5W (60W Equivalent) GU24 GU24
NW Neutral White 4000K
CW Cool White 5000K
CERTIFICATIONS
NORTH AMERICA ENVIRONMENT
BENEFITS
• Dimmable to 5% of light on most dimmers.2
• Energy Star compliant, Omni-directional design
• 8.5/ 13.5 Watts – 80% more efcient than comparable
40/60 Watt Incandescent lamps.
• Maintenance free operation, lasts over 50 times longer than
incandescent lighting.
• RoHS compliant – contains no mercury or lead.
Changing the way the world experiences light.
NAFTA
COMPLIANT
This product qualifies as an originating
good under the terms of NAFTA.
DEFINITYTM A19
A19
Specications supplied are nominal. Please refer to the DOE’s Lighting Facts Tolerance Guidelines.
1 Values are nominal, advances from further innovation, specications are subject to change.
2 See dimmer compatibility chart page on next page.
3 GU24 – Pending UL
FEATURES1
Equivalent Source Up to 40W & 60W
Incandescent
L70 lumen depreciation
design criteria =
50,000 hours
Housing Aluminum
Socket E26/GU24
Operating Temperature -20˚C to +40˚C
E26 MOL 4.284 in, 108.82mm
GU24 MOL3 4.52 in, 14.8mm
Voltage 120VAC
Weight 5.6 oz., 159g
Power Factor ≥.90
Warranty 5 year limited
Omni-directional
4.52
[114.80]
2.22
[56.38]
4.26
[108.20]
DFN A19_0912
S p e c i c a t i o n s a r e t y p i c a l v a l u e s a n d m a y c h a n g e w i t h o u t n o t i c a t i o n .
©2012 Lighting Science Group Corporation. All rights reserved.
877-999-5742 | www.lsgc.com
1227 South Patrick Drive | Satellite Beach, FL 32937
E26 BASE GU24 BASE
Prepared By
Project
Catalog #
Comments
Date
A19
Part Number Base Type Watts Lumens Voltage Efcacy CRI Life1
DFN A19 NW V1 120 E26/GU24 8.5W 475 120 56 85 50,000
DFN A19 WW V1 120 E26/GU24 8.5W 450 120 53 85 50,000
DFN A19 W27 V1 120 E26/GU24 8.5W 450 120 53 85 50,000
DFN A19 CW V1 120 E26/GU24 8.5W 505 120 59 87 50,000
DFN A19 NW V2 120 E26/GU24 13.5W 850 120 63 85 50,000
DFN A19 WW V2 120 E26/GU24 13.5W 800 120 59 85 50,000
DFN A19 W27 V2 120 E26/GU24 13.5W 800 120 59 85 50,000
DFN A19 CW V2 120 E26/GU24 13.5W 900 120 67 87 50,000
Specications supplied are nominal. Please refer to the
DOE’s Lighting Facts Tolerance Guidelines.
1
Values are nominal, advances from further innovation,
specications are subject to change.
2
Dimmer compatibility list indicates those dimmers that
have been tested and operate properly under normal
conditions. In certain cases, approved dimmers are
offered in higher wattage varieties that are also compliant
and allow the installation of additional lamps if kept
within the maximum inrush current equivalent provided
in the table.Each application is unique and various
factors such as load, common neutrals or other electrical
products on the circuit can, in certain instances, cause
variance in system performance. Consult dimming system
manufacturer for additional support in operation.
NW: Neutral White WW: Warm White W27: Warm White 2700K CW: Cool White
Cautions
• Not recommended for use in fully enclosed xtures.
• Turn power off before inspection, installation, or removal.
• Risk of Electric Shock – Use in dry locations only. Do not use where directly exposed to water or weather.
• Do not open – no user serviceable parts inside.
• North America use on 120VAC, 50 - 60 Hz circuits.
• This device is not intended for use with emergency exit xtures or emergency exit lights.
• Added weight of the device may cause instability of a freestanding portable luminaire.
• Use only with a portable table lamp that is provided with a shade.
• Use in portable table lamps in which the distance from the bottom of the base to the top of the lampholder does not exceed three (3) times the
minimum base diameter.
• This device complies with Part 15 of the FCC rules and has been tested and found to comply with the limits for a Class B digital device. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Any changes or modications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.”
A19
DFN A19_0912
DIMMER CAPABILITIES
LUTRON DIMMERS: ADRIANI AY600;
Commecrical Systems QSG-6P, LP-
RPM-4A-120; Diva DV-600, DVCL-153P;
Interfaces PHPM-WBX, PHPM-WBX w/
DVF-103P; Homeworks HW-RPM-4A-120,
HxD-6ND; Panel Module CTCL-153P,
TTCL-100D, Grak Eye; Radio Ra RRD-
10ND, RRD-6NA; Stanza SZ-6ND; Lutron
RRD-10ND, SZ-6ND, HW-RPM-4A-120,
HxD-6ND, S-600PR-WH, DV-600PR-WH,
TG-600PR-WH, Q600P, GL600, CN-
600PHW, DV-603PG, S-600, S-600P, LG-
600P, D-600PH, TT-300NLH, TG-603PG,
DV-600PR-WH OTHER DIMMERS: Ace
34050, 3027596 Leviton 6633-PL, 6684,
6631, IPI06-1LX Legrand DrRD4W
S p e c i c a t i o n s a r e t y p i c a l v a l u e s a n d m a y c h a n g e w i t h o u t n o t i c a t i o n .
©2012 Lighting Science Group Corporation. All rights reserved.
877-999-5742 | www.lsgc.com
1227 South Patrick Drive | Satellite Beach, FL 32937
Recommended number of
lamps per 600 watt dimmer2
While an LED lamp may draw as few
as 10 watts continuously, it could have
an in-rush current spike (maximum,
instantaneous input) which may limit the
number of lamps you can install on one
dimmer. The following table provides
a recommended maximum quantity of
DEFINITY lamps that should be used on
a typical approved 600W dimmer.
Ex: Max number of A19 60W lamps, with
an 80W in-rush, that can be used on
600W dimmer = 7
DFN LED
Lamp
Lamp In-Rush
Current
Equivalent
Max # of
Lamps
per 600W
Dimmer
A19 40 W 80 W 7
A19 60 W 80 W 7
