6.2.3.7 Packet Tracer Troubleshooting A VLAN Implementation Scenario 1 Instructions

6.2.3.7%20Packet%20Tracer%20-%20Troubleshooting%20a%20VLAN%20Implementation%20-%20Scenario%201%20Instructions

User Manual: Pdf

Open the PDF directly: View PDF PDF.
Page Count: 3

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 3
Packet Tracer - Troubleshooting a VLAN Implementation Scenario
1
Topology
Addressing Table
Device
Interface
IPv4 Address
Subnet Mask
Switch Port
VLAN
PC1
NIC
172.17.10.21
255.255.255.0
S1 F0/11
10
PC2
NIC
172.17.20.22
255.255.255.0
S1 F0/18
20
PC3
NIC
172.17.30.23
255.255.255.0
S1 F0/6
30
PC4
NIC
172.17.10.24
255.255.255.0
S2 F0/11
10
PC5
NIC
172.17.20.25
255.255.255.0
S2 F0/18
20
PC6
NIC
172.17.30.26
255.255.255.0
S2 F0/6
30
Objectives
Part 1: Test Connectivity between PCs on the Same VLAN
Part 2: Investigate Connectivity Problems by Gathering Data
Part 3: Implement the Solution and Test Connectivity
Scenario
In this activity, you will troubleshoot connectivity problems between PCs on the same VLAN. The activity is
complete when PCs on the same VLAN can ping each other. Any solution you implement must conform to the
Addressing Table.
Packet Tracer - Troubleshooting a VLAN Implementation Scenario 1
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 3
Part 1: Test Connectivity between PCs on the Same VLAN
From the command prompt on each PC, ping between PCs on the same VLAN.
a. Can PC1 ping PC4?
b. Can PC2 ping PC5?
c. Can PC3 ping PC6?
Part 2: Investigate Connectivity Problems by Gathering Data
Step 1: Verify configuration on the PCs.
Verify if the following configurations for each PC is correct.
IP address
Subnet mask
Step 2: Verify the configuration on the switches.
Verify if the following configurations on the switches are correct.
Ports assigned to the correct VLANs.
Ports configured for the correct mode.
Ports connected to the correct devices.
Step 3: Document the problem and the solutions.
List the problems and the solutions that will allow these PCs to ping each other. Keep in mind that there could
be more than one problem or more than one solution.
PC1 to PC4
a. Explain the connectivity issues between PC1 and PC4.
b. Record the necessary actions to correct the issues.
PC2 to PC5
c. Explain the connectivity issues between PC2 and PC5.
d. Record the necessary actions to correct the issues.
PC3 to PC6
e. What are the reasons why connectivity failed between the PCs?
Packet Tracer - Troubleshooting a VLAN Implementation Scenario 1
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 3
f. Record the necessary actions to correct the issues.
Part 3: Implement the Solution and Test Connectivity
Verify PCs on the same VLAN can now ping each other. If not, continue to troubleshoot.
Suggested Scoring Rubric
Packet Tracer scores 70 points. Documentation in Part 2, Step 3 is worth 30 points.

Navigation menu