Mise En 651607 Catalog

137819-Catalog 137819-Catalog 137819-Catalog Batch10 unilog cesco-content

580099-Catalog 580099-Catalog 580099-Catalog 728494 Batch10 unilog cesco-content

131811-Catalog 131811-Catalog 131811-Catalog Batch9 unilog cesco-content

2014-10-17

: Pdf 651607-Catalog 651607-Catalog 728494 Batch10 unilog

Open the PDF directly: View PDF .
Page Count: 77

Download
Open PDF In Browser	View PDF

Ty-Rap®
Catamount®
T&B®

Fastening Products

Table of Contents
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C2-C3
Ty-Rap® Cable Ties
Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C4-C7
Identification Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C8-C9
Speciality Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C10
Stripped-Coloured Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C11-C12
Cable Ties Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C13
Cable Ties for Special Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C14-C17
Ty-Rap® Stainless Steel Cable Ties and Accessories . . . . . . . . . . . . . . . . . . . . . . . . .C18-C28
SS - Two-Piece Solid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C19
TYS - Multi-LokTM Self-Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C20
SSR - Reusable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C21
SSH - Heavy Duty Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C22
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C23-C24
Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C25
S.S. Tape Embossing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C26
LS - Heavy-Duty Ball-Lock Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C27
DELTEC™ Cable Support System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C28-31
Ty-Rap® Hook and Loop Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C32
Material Selection Ordering Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C33-C36
Physical Properties of Cable Tie Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C33
Chemical Resistance Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C34-C36
Catamount® Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C37-C44
T&B® Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C45-C49
Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C45-C46
Double Loop Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C47
Low-Profile Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C48
Ski-Badge Holder Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C49
Ty-Rap® Cable Tie Mounting Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C50-C57
Ty-Rap® Cable Clamps and Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C58-C63
Ty-Rap® Harnessing Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C64
Ty-Rap® Mounting Bases for Heavy-Duty Applications . . . . . . . . . . . . . . . . . . . . . . .C65-C66
Ty-Rap® Wire Protection Products
Split Loom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C67-C70
Braided Sleeving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C71-C73
Ty-Rap® Cable Tie Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C74-C77

w w w. t n b. c a

C1

Ty-Rap

®

Fastening Products

Overview
Trust Ty-Rap® to securely fasten your cables!
Installers Know and Trust Ty-Rap® High-Performance Fastening
Products from Thomas & Betts
Wire bundling is an integral part of modern electrical and electronic installations. To finish your
harnessing and bundling project as reliably and economically as possible, choose genuine Ty-Rap®
cable ties. These fastening systems include a full range of cable ties, identification ties, clamps,
bases, harnessing aids and installing tools. Using Ty-Rap® fastening systems for all wiring jobs, large
and small, will speed and improve the reliability of harnessing and wire bundling while saving you
money.

Harnessing

Point-to-point and Long Distance Wiring
•
•
•

Bundling & fastening cables between equipment
Panel & Machine Tool Builders
Industrial & Commercial Applications, Refineries, Office
Buildings

Installers prefer the ease of use and exceptional durability of genuine
Ty-Rap® cable ties. Engineered for labor savings and high
performance, Ty-Rap® cable ties are commonly used in a variety of
applications. Standoffs, bulkhead mounting bases, adhesive mounting
bases and a wide variety of clamping devices will meet or exceed any
requirements. Weatherable and special material Ty-Rap® cable ties are
exceptionally suited for years of service in extreme environments.

•

Harness Board pre-wiring prior to
installation

•

Large OEMs-Automotive, Aerospace,
Computers, Electronics, Copiers,
Appliances and other Durable Goods

T&B® fastening systems for large volume cable tying combine high-speed
ergonomically designed automatic and semi-automatic tools, along with a wide
selection of ties and harnessing aids to meet your application requirements.
Accessories include various harnessing aids, retainers, supports, posts, pins and
guides that allow the wire to be quickly routed with or without the use of nails.

Other Applications
•
•
•
•

HVAC

Cable Fastening Accessories

Recreational

Choose from one of the largest assortments of mounting bases, clips and clamps,
spacers, lashing straps, harness board accessories, braided wire sleeve, and
accessories for heavy-duty lashing. Use Thomas & Betts cable fastening accessories
for the finishing touch on your next wiring project.

Telecom & Utility
Packaging

Ty-Rap® cable ties are remarkably well suited for a variety of other
non-electrical applications. Ty-Rap® cable ties exceed UL
requirements for smoke developed and heat release for use in air
handling spaces.
Ty-Rap® cable ties meet international standards such as CSA and CE
as well as UL,
, Belcor, ADC and military specifications in North
America. T&B® also offers a complete stainless steel Deltec cable
fastening system for demanding and weather-resistant applications.
Choose genuine Ty-Rap® cable ties for the rugged “Grip of Steel ”.
Look for the oval head.
TM

Tools
Ty-Rap® installing tools finish the installation of the cable tie. Ties are cinched to the
proper tension and the excess tail is cut off precisely flush with the head, leaving no
sharp corners or ragged edges. Ty-Rap® installing tools have narrow noses and slim
profiles for work in tight spaces or between harness board nails. The operation is
quick, reliable and cost effective.

®

C2

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Overview
Why Choose Genuine Ty-Rap® Cable Ties?
Rounded, Low Profile Head gives a
professional, quality look to wire
bundling projects. The classic-shaped
head is designed to prevent snags on
uneven surfaces and more easily pull
through bulkheads. There are no
sharp edges, so these ties are also
easier on the installer’s hands.

When you choose a cable tie from T&B®, you can
count on quality, performance and innovation to
make your work easier. Depending on your
application, choose genuine Ty-Rap® Cable Ties,
along with our wide assortment of quality
accessories and installing tools to make
installation hassle-free.

“The Grip of Steel™” Non-Magnetic Stainless Steel
Locking Barb insures both maximum strength and the
right tightness every time. Because there are no
notches, Ty-Rap® Cable Ties provide an infinite number
of locking positions while fastening the tie at the precise
bundle diameter.

The Turned-up Tail orients the tie
for easy assembly, making the ties
easier to pick up on a flat surface.

Versatile Nylon 6/6 Material provides high strength, a
wide temperature range and prevents toxic or irritating
emissions. Ty-Rap® Cable Ties are also available in
weather-resistant versions, heat-stabilized, flameretardant, Polypropylene, Nylon12, Fluoropolymer, Halar,
and Stainless Steel materials for a variety of extreme
environments.

No-Slip Tail provides easy grip during
tensioning. Ty-Rap® cable ties feature
a unique friction surface design that’s
appreciated by more tradespeople.

Smooth, Notchless Body reduces stress concentration
points under tension, making the tie stronger and
thinner than notched body ties.

Ribbed and Stippled Body
“grips” the bundle and prevents
slippage. Rounded edges protect
insulation, preventing sharp
edges from damaging cables.

For a whole bundle of
reasons, trust
only Genuine

Ty-Rap® Cable Ties
by Thomas & Betts in your
next wiring installation.

w w w. t n b. c a

C3

Ty-Rap

®

Fastening Products

Cable Ties

TY525M
Tie body width 0.184 in.

TY523M
Tie body width 0.091 in.

TY524
Tie body width 0.140 in.

Std.
Cat. No.

Bulk
Cat. No.

Body
Width
(in./mm)

TY5272M
Actual size body width 0.270 in.

Length
(in./mm)

Max. Wire
Bundle Dia.
(in./mm)

Military
Standard
Part No.

3.62/91.95

0.63/16.00

MS3367-4

7.00/177.80

1.50/38.10

–

Tensile
Strength
(lb./N)

Std.
Pkg.

Bulk
Pkg.

100

1,000

Ty-Rap® Standard Nylon 6/6 Cable Ties
TY523M

TY23M

TY52315M

TYB2315M
0.09/2.29

18/80.07

TY5232M

TY232M

8.00/203.20

2.00/50.80

–

TY5234M

TY234M

14.00/355.60

4.00/101.60

–

TY524M

TY24M

5.50/139.70

1.13/28.70

MS3367-5

TY5242M

TY242M

8.19/208.03

2.00/50.80

–

40/177.90
0.14/3.56

TY526M

TY26M

11.10/281.94

3.00/76.20

–

TY5244M

TY244M

14.50/368.30

4.00/101.60

–

TY525M

TY25M

7.31/185.67

1.75/44.45

MS3367-1

TY5253M

TY253M

11.60/294.64

3.00/76.20

MS3367-7

TY528M

TY28M

14.20/360.68

4.00/101.60

MS3367-2

TY5272M*

TY272M*

8.75/222.25

2.00/50.80

–

TY527M*

TY27M

13.40/340.36

3.50/88.90

MS3367-3

TY5275M

TY275M

18.00/457.20

5.00/127.00

–

TY5277M

TY277M

24.30/617.22

7.00/177.80

–

TY529M

TY29M

30.00/762.00

9.00/228.60

MS3367-6

TY53510M**

–

35.00/889.00

10.00/254.00

–

45.00/1143.00

13.00/330.20

–

30/133.40

0.19/4.83

0.27/6.86

0.32/8.13

TY54513M**

–

50/222.40

120/533.80

500
50

175/778.40

–

Cable ties made from natural nylon 6/6 are excellent performers in most applications. Nylon 6/6 is recommended for use in temperatures ranging from 185ºF to -40ºF (85°C to -40°C).
CSA Certified. Natural 6/6 Nylon Cable Ties are suitable for use in air handling spaces in accordance with rules 12-010 (3), (4) and (5), and 12-020 of the CEC.
* Not CSA Certified.
**

C4

w w w.tnb.c a

®

Ty-Rap

Fastening Products

Cable Ties

TY525MX
Tie body width 0.184 in.

TY523MX
Tie body width 0.091 in.

TY524MX
Tie body width 0.140 in.

TY5272MX
Actual size body width 0.270 in.

The MX Series cable ties are recommended for outdoor use.
ULTRAVIOLET
RESISTANT

Std.
Cat. No.

Bulk
Cat. No.

Body
Width
(in./mm)

Length
(in./mm)

Max. Wire
Bundle Dia.
(in./mm)

Military
Standard
Part No.

3.62/91.95

0.63/16.00

MS3367-4

7.00/177.80

1.50/38.10

–

Tensile
Strength
(lb./N)

Std.
Pkg.

Bulk
Pkg.

100

1,000

Ty-Rap® Nylon 6/6 – Weather-Resistant
TY523MX

TY23MX

TY52315MX

TYB2315MX
0.09/2.29

18/80.07

TY5232MX

TY232MX

8.00/203.20

2.00/50.80

–

TY5234MX

TY234MX

14.00/355.60

4.00/101.60

–

TY524MX

TY24MX

5.50/139.70

1.13/28.70

MS3367-5

TY5242MX

TY242MX

8.19/208.03

2.00/50.80

–

40/177.90
0.14/3.56

TY526MX

TY26MX

11.10/281.94

3.00/76.20

–

TY5244MX

TY244MX

14.50/368.30

4.00/101.60

–

TY525MX

TY25MX

7.31/185.67

1.75/44.45

MS3367-1

TY5253MX

TY253MX

11.60/294.64

3.00/76.20

MS3367-7

TY528MX

TY28MX

14.20/360.68

4.00/101.60

MS3367-2

TY5272MX†

TY272MX†

8.75/222.25

2.00/50.80

–

TY527MX

TY27MX

13.40/340.36

3.50/88.90

MS3367-3

TY5275MX

TY275MX

18.00/457.20

5.00/127.00

–

TY5277MX

TY277MX

24.30/617.22

7.00/177.80

–

TY529MX

TY29MX*

30.00/762.00

9.00/228.60

MS3367-6

TY53510MX**

–

35.00/889.00

10.00/254.00

–

45.00/1143.00

13.00/330.20

–

30/133.40

†

0.19/4.83

0.27/6.86

0.32/8.13

TY54513MX**

–

50/222.40

120/533.80

500
50

175/778.40

–

* For military compliance of weather-resistant black 120 lb. ties, replace suffix X with O (i.e. TY27M-0).
† Not
Listed or Recognized Models or CSA Certified.
**
CSA Certified. Natural 6/6 Nylon Cable Ties are suitable for use in air handling spaces in accordance with rules 12-010 (3), (4) and (5), and 12-020 of the CEC.

w w w. t n b. c a

C5

Ty-Rap

®

Fastening Products

Cable Ties
Body
Width
(in./mm)

Std. Pkg.
Cat. No.

Length
(in./mm)

Max. Wire
Bundle Dia.
(in./mm)

Tensile
Strength
(lb./N)

Std.
Pkg.

1.75/44.45

50/222.40

10

Ty-Rap® Nylon 6/6 Cable Tie – Colour Assortment
TY525M-CLRS

0.19/4.83

7.31/185.67

Cable ties are same size as TY525M shown above. 10 ties in each colour (black, brown, red, orange, yellow, green, blue, purple,
grey & white) are packaged. 100 total cable ties per package.

The colours you need in convenient packs!
Ty-Rap® Nylon 6.6 Cable Ties – Colour Assortment

•

Construction – nylon 6.6, 316 stainless steel locking device

Std.
Cat. No.

Bulk
Cat. No.

Tensile
Strength
(lb./N)

Length
(in./mm)

Description

–

TY525M-CLRS

Multi-Coloured Natural Nylon (10 each of standard ten colours)

–

TY25M-0

Black, Natural Nylon

–

TY25M-1

Brown, Natural Nylon

–

TY25M-2

Red, Natural Nylon

–

TY25M-3

Orange, Natural Nylon

–

TY25M-4

Yellow, Natural Nylon

–

TY25M-5

Green, Natural Nylon

–

TY25M-6

Blue, Natural Nylon

–

TY25M-7

Purple, Natural Nylon

–

TY25M-8

Grey, Natural Nylon

–

TY25M-9

White, Natural Nylon

Bulk
Pkg.
100 ties

7.31/185.67

50/222.40
1,000 Ties

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC)
• 100 standard ties in black, brown, red, orange, yellow, green, blue, purple,
grey and white (10 each)

• UL Listed Natural 6.6 Nylon Cable Ties are suitable for use in air handling
spaces (plenums) in accordance with Section 300.22 (C) & (D) of the National
Electrical Code

• Recommended tooling – ERG-50, WT1-TB
Natural nylon is standard. For coloured Ty-Rap® ties, add the following suffix numbers to catalogue numbers.
Example: TY25M-2 would be red TY25M. (Consult Regional Sales Office for ordering information.)

How to Order Coloured
Ty-Rap ® Cable Ties
and Accessories

C6

Colour
Black

Sufﬁx No.
X

(outdoor)
Brown

1

Colour

Sufﬁx No.

Colour

Sufﬁx No.

Colour

Sufﬁx No.

Red

2

Green

5

Grey

8

Orange

3

Blue

6

White

9

Yellow

4

Purple

7

w w w. t n b. c a

Ty-Rap

®

TY533M

Fastening Products

Std.
Cat. No.

Body
Width
(in./mm)

Bulk
Cat. No.

Length
(in./mm)

Max. Wire
Tensile
Mounting
Std. Bulk
Bundle Dia.
Strength
Hole
Pkg. Pkg.
(in./mm)
(lb./N)

Ty-Rap® Mounting Head Cable Ties
TY534M

TY535M
TY5354M

TY537M

Great for use with screws, nuts and bolts for
secure fastening to surfaces.

TY554M

TY533M

TY33M

0.09/2.29

4.00/101.60

0.63/16.00

TY534M

TY34M

0.14/3.56

6.00/152.40

TY535M

TY35M

7.80/198.12

TY5354M

TY354M

14.60/370.84

TY1435M

–

TY635M

–

TYF535M

TYF35M

TY537M

TY37M

0.18/4.57

7.80/198.12

0.19/4.83

#4

18/80.07

1.13/28.70

#8

40/177.90

1.75/44.45

#10

4.00/101.60

#10
0.248

1.77/44.96

7.24/183.90
0.30/7.62

13.90/353.06

1,000
50/222.40

0.138
0.138

3.50/88.90

1/4

100

–
100

120/533.80

50

500

Cable ties made from natural nylon 6/6 are excellent performers in most applications. Nylon 6/6 is recommended for use
in temperatures ranging from 185ºF to -40ºF (85ºC to -40ºC).

Std.
Cat. No.

Bulk
Cat. No.

Body
Width
(in./mm)

Length
(in./mm)

Max. Wire
Mounting
Bundle Dia.
Hole
(in./mm)

Tensile
Strength
(lb./N)

Std.
Pkg.

Bulk
Pkg.

100

1,000

Ty-Rap® Push Mount Cable Ties

TY538M

For use in 3/16 in. and 1/4 in. pre-drilled holes.
Thickness panel 0.094 max. (TY554M)
Range 0.04 - 0.156 (TY538M)

TY533MX

TY554M

TY54M

0.14/3.56

5.96/151.38

1.13/28.70

3/16

40/177.90

TY538M

TY38M*

0.18/4.57

7.80/198.12

1.75/44.45

1/4

50/222.40

Cable ties made from natural nylon 6/6 are excellent performers in most applications. Nylon 6/6 is recommended for use
in temperatures ranging from 185ºF to -40ºF (85ºC to -40ºC).
* Nylon 6/6 UV weather-resistant version available (TY38MX).

Std.
Cat. No.

Bulk
Cat. No.

Body
Width
(in./mm)

Length
(in./mm)

Max. Wire
Tensile
Mounting
Std. Bulk
Bundle Dia.
Strength
Hole
Pkg. Pkg.
(in./mm)
(lb.N)

Ty-Rap® Nylon 6/6 Weather-Resistant
TY534MX

TY535MX
TY5354MX

TY533MX

TY33MX

0.09/2.29

4.00/101.60

0.63/16.00

TY534MX

TY34MX

0.14/3.56

6.00/152.40

TY535MX

TY35MX

7.80/198.12

TY5354MX

TY354MX

TY537MX

TY37MX

#4

18/80.07

1.13/28.70

#8

40/177.90

1.75/44.45

#10

14.60/370.84

4.00/101.60

#10

0.30/7.62 13.90/353.06

3.50/88.90

1/4

0.18/4.57

100

1,000

50

500

50/222.40
120/533.80

TY537MX

The MX series cable ties are recommended for
outdoor use.

w w w. t n b. c a

C7

Ty-Rap

®

Fastening Products

Identiﬁcation Cable Ties
Self-locking Ty-Rap® identification ties are available in both single and multiple configurations. They may be
marked with the special Thomas & Betts black or red marking pen which produces a permanent legend, or
they can be heat stamped. Because the ties serve the dual purpose of tying and identifying, you will achieve
extra economies. They can be applied with the standard Ty-Rap® tying tools used for regular ties.
Nylon 6/6 UV weather-resistant version available (add suffix “-x”).

TY551M
TY5512M

TY553M
TY5532M
TY153M

Std.
Cat. No.

Bulk
Cat. No.

Body
Width
(in./mm)

Length
(in./mm)

Max. Wire
Military Marking Pad Tensile
Std. Bulk
Bundle Dia. Standard
Size (in.)
Strength
Pkg. Pkg.
(in./mm)
Part No.
WxH
(lb./N)

Ty-Rap® Identification Cable Ties
TY546M

TY548M
TY546MD

TY551M

TY51M

3.60/91.44

0.63/16.00

MS3368-5

1 x 0.313

TY5512M

TY512M

8.30/210.82

2.00/50.80

–

1 x 0.313

TY553M

TY53M

4.00/101.60

0.63/16.00

–

0.813 x 0.359

50

500

TY5532M

TY532M

8.40/213.36

2.00/50.80

–

0.813 x 0.359

100

1,000

–

TY153M

0.10/2.54

4.35/110.49

0.63/16.00

–

0.781 x 1

–

500

TY546M

TY46M

0.18/4.57

TY548M

TY48M

100

1,000

TY546MD TY46MD
TY546MT

TY546MT

TY46MT

TY546MF

TY46MF

500
100
1,000

0.09/2.29
18/80.07

7.10/180.34

1.75/44.45

MS3368-1

0.5 x 0.875

14.20/360.68

4.00/101.60

MS3368-2

0.5 x 2.125

MS3368-3

1.172 x 1

7.25/184.15

1.75/44.45

MS3368-4

1.210 x 1

100

–

2.48 x 1

–

50/222.40

50

0.19/4.83
500

TY546MF

Custom Heat Stamping
Thomas & Bett’s Custom Heat Stamping provides an economical way to
fasten and identify cable bundles. Mark nylon cable ties, identification cable
ties, and identification plates to suit your application.
• 1/16 in., 1/8 in., 3/16 in. characters available
• Standard Type: Gothic Capitol
• Character sizes can be mixed from line to line on Identification cable ties
• Alphanumeric and Sequential numbering available
• Six digit sequential numbering available in 1/8" characters

• Eight digit sequential numbering available in 1/16" and 3/16" characters
• The following colours of heat stamping are available – Black, Blue, Green,
Red, Yellow, Orange and White
• Special logos and different type styles can be accommodated when
camera ready artwork is provided
• Minimum order quantity is 3000 pieces per catalogue number and
message

Contact your Regional Sales Ofﬁce for pricing, availability, quotation and order entry.

C8

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Identiﬁcation Cable Ties
L

Width
(in./mm)

Cat. No.
W

TC123-TB

TC223-TB

Identification Plates
TC123-TB

1.25/31.75

TC124-TB

1.50/38.10

TC125-TB

1.75/44.45

TC126-TB

2.00/50.80

TC128-TB

Thickness
(in./mm)

Max Cable Tie
Width (in./mm)

Std.
Pkg.

0.19/4.83

1,000

0.01/0.25

2.50/63.50

TC223-TB

TC224-TB

Length
(in./mm)

0.75/19.05

1.28/32.51

TCZ223

1.28/32.51

TC224-TB

1.28/32.51

TC225-TB

1.75/44.45

TC226-TB

2.00/50.80

TC228-TB

2.50/63.50

0.02/0.51

Ranging in length from 1-1/4 in. to 2-1/2 in., the identification plates are secured to the cable with Ty-Rap® ties. They are
composed of 0.010 in. and 0.015 in. thick nylon, and have a surface which can be marked easily. Thomas & Betts
offers custom heat stamping of your plates at the factory. Other materials are available. Contact your Regional Sales
Office.

Std.
Bulk
Cat. No. Cat. No.

Snaps onto the head of a conventional
cable tie to convert it to an identification
tie.
• When snapped onto the tie head, the tag
is conveniently held in place until it is
permanently fastened
• Offers maximized inventory control
because the I.D. tag will accommodate
different tie lengths and materials

w w w. t n b. c a

Description

Marking
Pad Size
(in.)
WxH

Snap-On Identification Marker Tag
Snaps onto the heads of all miniature 18 lb. series cable ties
TC523
TC23

1 x 0.35

TC524

TC24

Snaps onto the heads of all intermediate 30 and 40 lb. series cable ties

1 x 0.50

TC525

TC25

Snaps onto the heads of all standard 50 lb. series cable ties

1 x 0.50

Std. Bulk
Pkg. Pkg.

100

1,000

Note: Made of natural nylon 6/6.

• Allows marking and bundling to be done in
one operation
• The marking can be made with a
Thomas & Betts permanent marking pen
(black or red); catalogue numbers:
WT163M-1 (black), WT163M-3 (red)

• The identification tags are sold separately
and can be conveniently snapped on the
cable ties at the assembly location just
before being installed on the bundle

C9

Ty-Rap

®

Fastening Products

Speciality Cable Ties
Body
Width
(in./mm)

Length
(in./mm)

Bundle Dia.
(in./mm)

Reusable Ty-Rap® Cable Ties
TYR505

7.50/190.50

1.75/44.45

TYR508

14.30/363.22

4.00/101.60

Cat. No.

0.18/4.57

Tensile
Strength
(lb./N)

Std.
Pkg.

50/222.40

100

Cable ties made from natural nylon 6/6 are excellent performers in most applications. Nylon 6/6 is recommended
for use in temperatures ranging from 185ºF to -40ºF (85ºC to -40ºC).

Body
Width
(in./mm)

Cat. No.

This Ty-Rap® brand cable tie lets you secure wire
bundles up to 1-3/4 inches in diameter to all
masonry surfaces. It is equipped with a masonry
plug which is driven into the drilled hole. Once
installed, the tail is looped through the head to
provide a neat, safe, low-profile installation. It is
made of black, weather-resistant nylon.

Max. Wire
Bundle Dia.
(in./mm)

Masonry
Hole
Size

Pullout
Force

Std.
Pkg.

1/4

25

50

Plug-TyTM Cable Tie for Masonry Surfaces
0.18/4.57
1.75/44.45
TY544MX

Cat. No.

Drive-TyTM Cable Tie
TY545MX

Body
Width
(in./mm)

Max. Wire
Bundle Dia.
(in./mm)

Pullout
Force

Std.
Pkg.

0.18/4.57

1.75/44.45

25

50

The Drive-TyTM cable tie gives you a fast, safe
means of securing cables to wood surfaces.

Std.
Cat. No.

• One-piece design, fast and convenient to use
• Lowers your installed cost
• Clamping range of 1/16 to 2 -3/8 inches
reduces your inventory – one clamp replaces
many
• Visually attractive – head resembles rivet
• Locking grooves maintain tight grip

C10

Bulk
Cat. No.

Body
Width
(in./mm)

Length
(in./mm)

Max. Wire
Bundle Dia.
(in./mm)

Universal Button Head Cable Tie
9.60/243.84
TY541M
TY41M

2.37/60.20

650-41600 –

0.23/5.84 10.25/260.35

2.50/63.50

696-41848 –

12.50/317.50

3.00/76.20

Hole
Size

Tensile
Std. Bulk
Strength
Pkg. Pkg.
(lb./N)

50
0.32-0.68

65

500

1,000

Note: Loop tie through hole in frame, around electrical, hydraulic, or air hoses to be clamped, and through head.
Tighten and cut off with Ty-Rap® tool. Visually looks like a rivet.

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Stripped-Coloured Cable Ties
Designed primarily for P.I.C. and station cable binder marking,
these self-locking ties install without tools in less than
10 seconds. Compared to an installation time of 30–60
seconds using the twisted wire method, the time saving is
substantial. High-contrast colour stripes extend to end of tail
for instant, permanent identiﬁcation of binder.

Std.
Cat. No.

Bulk
Cat. No.

Tie
Colour

Colour
Stripe

Body Width
(in./mm)

Length
(in./mm)

Tensile
Strength
(lb./N)

Std.
Pkg.

Bulk
Pkg.

Striped-Coloured Ty-Rap® Cable Ties for Identification Telephone Cable Binder
696-40527-0C
696-40527-1-0C
696-40527-1-2C
696-40527-1-4C
696-40527-1-7C
696-40527-1-9C
696-40527-2C
696-40527-3-0C
696-40527-3-2C
696-40527-3-4C
696-40527-3-7C
696-40527-3-9C
696-40527-4C
696-40527-5-0C
696-40527-5-2C
696-40527-5-4C
696-40527-5-7C
696-40527-5-9C
696-40527-6-0C
696-40527-6-2C
696-40527-6-4C
696-40527-6-7C
696-40527-6-9C
696-40527-8-0C
696-40527-8-2C
696-40527-8-4C
696-40527-8-9C

696-40527-0C
696-40527-1-0
696-40527-1-2
696-40527-1-4
696-40527-1-7
696-40527-1-9
696-40527-2
696-40527-3-0
696-40527-3-2
696-40527-3-4
696-40527-3-7
696-40527-3-9
696-40527-4
696-40527-5-0
696-40527-5-2
696-40527-5-4
696-40527-5-7
696-40527-5-9
696-40527-6-0
696-40527-6-2
696-40527-6-4
696-40527-6-7
696-40527-6-9
696-40527-8-0
696-40527-8-2
696-40527-8-4
696-40527-8-9

Cat. No.

Black

Brown

Red

Orange

Yellow

Green

Blue

Slate

–
Black
Red
Yellow
Violet
White
–
Black
Red
Yellow
Violet
White
–
Black
Red
Yellow
Violet
White
Black
Red
Yellow
Violet
White
Black
Red
Yellow
White

Order per bag
0.09/2.29

Description

3.62/91.95

18/80.07

1 bag = 50 cable ties

1,000

Sold in Multiple of 20

Std.
Pkg.

Striped-Coloured Ty-Rap® Cable Tie Kits
696-40587
696-40587-1
696-40587C
696-40587CF
696-40587M
696-40587MF

w w w. t n b. c a

Pouch only
Pouch with Ty-Rap® cable tie assortment 1 bag each of 50 each (1,250 total)
Cloth pouch only
Cloth pouch with 1 bag of 50 each Ty-Rap® cable ties (1,250 total)
Mini pouch only
Mini pouch filled with assortment of Ty-Rap® cable ties (50 each)

1

C11

Ty-Rap

®

Fastening Products

Stripped-Coloured Cable Ties
Bi-Coloured Ty-Rap®
There is also available a plastic (Part# 650-40587) and canvas (Part# 650-40587-C) pouch
designed with 25 pockets to store the bi-coloured ties. Also available is a plastic minipouch (Part# 650-40587-M) designed to fit into shirt pocket or over belt. Holds a maximum
of 5 plastic bags of 50 each of the bi-coloured ties.

Ty-Rap®
Mini pouch

Plastic and canvas pouches also available filled with bi-coloured ties.
Cat. No. 650-40587-1 (filled plastic pouch)
Cat. No. 650-40587-CF (filled canvas pouch)

Cat. No. 650-40587-M (Empty)

PLASTIC & CANVAS POUCH LOADING DIAGRAM
Blue Tie
White Stripe
#696-40527-6-9-C

Orange Tie
White Stripe
#696-40527-3-9-C

Green Tie
White Stripe
#696-40527-5-9-C

Brown Tie
White Stripe
#696-40527-1-9-C

Slate Tie
White Stripe
#696-40527-8-9-C

Blue Tie
Red Stripe
#696-40527-6-2-C

Orange Tie
Red Stripe
#696-40527-3-2-C

Green Tie
Red Stripe
#696-40527-5-2-C

Brown Tie
Red Stripe
#696-40527-1-2-C

Slate Tie
Red Stripe
#696-40527-8-2-C

Blue Tie
Black Stripe
#696-40527-6-0-C

Orange Tie
Black Stripe
#696-40527-3-0-C

Green Tie
Black Stripe
#696-40527-5-0-C

Brown Tie
Black Stripe
#696-40527-1-0-C

Slate Tie
Black Stripe
#696-40527-8-0-C

Blue Tie
Yellow Stripe
#696-40527-6-4-C

Orange Tie
Yellow Stripe
#696-40527-3-4-C

Green Tie
Yellow Stripe
#696-40527-5-4-C

Brown Tie
Yellow Stripe
#696-40527-1-4-C

Slate Tie
Yellow Stripe
#696-40527-8-4-C

Blue Tie
Violet Stripe
#696-40527-6-7-C

Orange Tie
Violet Stripe
#696-40527-3-7-C

Green Tie
Violet Stripe
#696-40527-5-7-C

Brown Tie
Violet Stripe
#696-40527-1-7-C

Red Tie
Violet Stripe
#696-40527-2-C

Ty-Rap®
Ty-Pouch

Cat. No. 650-40587-1 (Plastic Filled)
Cat. No. 650-40587 (Plastic Empty)
Cat. No. 650-40587CF (Canvas Filled)
Cat. No. 650-40587-C (Canvas Empty)

C12

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Cable Ties Dispenser
Cable Ties at your ﬁngertips!
• Durable, lightweight polyester exterior and tough vinyl interior
•
•
•
•

construction
Rugged diamond-shaped cutout for easy access to cable ties (up to 8 in.,
11 in. –14 in. lengths) and rectangular-shaped (for 4 in. length)
Handy belt clip and chrome steel loop for easy attachment
Resealable hook-and-loop ﬂap for easy reﬁll
Includes 100 genuine Ty-Rap® cable ties

Cat. No.

Description

Ty-Rap® Tote™ 4 in., 8 in. and 11 in. -14 in. Combination Length Cable Tie
Dispensers
TY-TOTE-25 Ty-Rap Tote™ 8 in. Cable Tie Dispenser (includes 1 pkg. TY525M)
TY-TOTE-23 Ty-Rap Tote™ 4 in. Cable Tie Dispenser (includes 1 pkg. TY523M)
TY-TOTE-28 Ty-Rap Tote™ 11 in.–14 in. Cable Tie Dispenser (includes 1 pkg. TY528M)

Pkg.

1

Order only genuine Ty-Rap® Cable Ties to reﬁll your dispenser!

w w w. t n b. c a

C13

Ty-Rap

®

Fastening Products

Cable Ties for Special Environments
Material Selection Ordering Guide
Thomas & Betts offers Ty-Rap® cable ties and accessories in a wide variety of materials,
each suited for specific environments. The purpose of this document is to assist you in
choosing the best material for your particular application. The effects of weathering, flame,
chemicals, extreme temperatures, and radiation on the different materials are clearly
presented in the following tables to simplify this process. Once you have determined the
most suitable material, you can choose from the wide variety of Ty-Rap® cable ties,
identification ties, mounting bases, lashing ties, etc., offered by Thomas & Betts.

How to use Table 1:
Table 1 simplifies the material selection process by giving the relative performance ratings of the materials offered by Thomas & Betts.
For example, if your application is in an extremely cold environment, four materials will answer your need: Fluoropolymer, nylon 12, Halar® (*),
and stainless steel. Then, cost may be your next most important criteria, so out of those four options, nylon 12 would be the most cost effective.
However, if tensile strength is important, then stainless steel would be the better choice.
Refer to tables 2 (page C33) and 3 (pages C34-C36) for more detailed information regarding physical properties of the materials and chemical
resistance of the materials respectively.
It is extremely difficult to provide data on all the possible combinations or conditions that can occur. This information is based on data provided
by the manufacturers of the specific materials listed and is provided only as a general guide. No specific recommendation is intended. As each
application may differ, cable tie samples should be tested in the intended application by the user to determine suitability.
* Halar® is the trademark of Solvay Solexis, Inc.

TABLE 1
Available Materials

Ultraviolet Resistance
Radiation Resistance
Low Temperature
High Temperature
Flammability
Tensile Strength
Relative Cost
Chemical Resistance

C14

5 = Most Suitable

1 = Least Suitable

Natural
66 Nylon

Weather
Resistant
66 Nylon

Heat
Stabilized
Natural
66 Nylon

Flame
Retardant
66 Nylon

Weather
Resistant
Nylon 12

1
1
3
3
3
3
Low

4
1
3
3
3
3
Low

1
1
3
4
3
3
Low

1
1
2
3
4
3
Med

4
1
4
2
1
2
Med
See Table 3

Weather
Resistant
FluoroPolypropylene polymer
4
1
3
2
1
1
Low

5
4
4
4
4
3
High

Halar®

Stainless
Steel

Weatherable
Acetal

5
4
4
4
4
3
High

5
5
5
5
5
5
High

4
1
4
2
1
2
High

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Cable Ties for Special Environments
Perfect for outdoor applications!
Colour — Black
For use in temperatures ranging from
-40ºF to 221ºF (-40ºC to 105ºC)

• Ideal for Industrial OEM and MRO (includes, but not limited to industrial, lawn/garden/farming
•
•
•
•
•

equipment, recreation vehicles, heavy equipment)
Can be placed in environments requiring heat stabilization and UV resistance
Provides a smooth, low-proﬁle look and offers unlimited tensioning range for a perfect ﬁt
Features an oval head on every original Ty-Rap® Cable Tie
Quicker to install and less expensive than metallic fasteners, lacing cord or tape
Made of UV resistant, heat-stabilized nylon

Bulk
Cat. No.

Length
(in./mm)

Tensile Strength
(lb./N)

Bulk
Pkg.

Ty-Rap® Heat Stabilized/Ultraviolet Resistant Cable Ties
TY23MX-A
TY24MX-A
TY25MX-A
TY27MX-A

3.62/91.95
5.50/139.70
7.31/185.67
13.40/340.36

18/80.07
40/177.90
50/222.40
120/533.80

1,000
500

Beat the heat!
• Ideal for Industrial OEM and MRO (includes, but not limited to metal processing,
•
•
•
•

paper mills, lighting and commercial construction markets with high temperature
environments up to 302ºF (150ºC))
Provides a smooth, low-proﬁle look and offers unlimited tensioning range for a
perfect ﬁt
Features an oval head on every original Ty-Rap® Cable Tie
Quicker to install and less expensive than metallic fasteners, lacing cord or tape
Made of extra high-temperature resistant nylon

Bulk
Cat. No.

Length
(in./mm)

Tensile Strength
(lb./N)

Bulk
Pkg.

Ty-Rap® Extra High-Temperature Cable Ties
TYHT23M
TYHT25M
TYHT27M
TYHT28M*

3.62/91.95
5.50/139.70
7.31/185.67
13.40/340.36

18/80.07
40/177.90
50/222.40
120/533.80

Colour — Light Green
For use in temperatures
ranging from -40° to 302ºF
(-40° to 150ºC)

1,000
500

*UR Pending

w w w. t n b. c a

C15

Ty-Rap

®

Fastening Products

Cat. No.

Body
Width
(in./mm)

Length
(in./mm)

Max. Wire
Tensile
Bundle Dia. Strength
(in./mm)
(lb./N)

Base
Material

Std.
Pkg.

Ty-Rap® Detectable Cable Ties
Detectable using metal detection and X-ray detection systems
and visions systems.
Polypropylene parts are also bouyant in liquid application.
Material — Polyamide (Nylon 6.6) or Polypropylene
Colour — Blue
For use in temperatures ranging from -40ºF to 185ºF
(-40ºC to 85ºC).

TY523M-NDT
TY525M-NDT
TY527M-NDT
TY528M-NDT
TY523M-PDT
TY525M-PDT
TY527M-PDT
TY528M-PDT

Cat. No.

Make safety a priority!
This material meets UL 94V-O ﬂammability rating.
Colour — White
For use in temperatures ranging from -40ºF to 185ºF
(-40ºC to 85ºC).
† Not

Recognized Models.

This material provides very good resistance to ultraviolet light
and chemical exposure. Nylon 12 is a lower, moistureabsorbing material than 6.6 nylon and the effect of water on
properties is much less.
Colour — Black
For use in temperatures ranging from -40ºF to 185ºF
(-40ºC to 85ºC).

Material meets ASTM D4066 PA121.
Colour — Green Tint
For use in temperatures ranging from -40ºF to 221ºF
(-40ºC to 105ºC).

C16

Length
(in./mm)

0.09/2.29
0.19/4.70
0.27/6.86
0.19/4.70
0.09/2.29
0.19/4.70
0.27/6.86
0.19/4.70

Body
Width
(in./mm)

0.63/16.00
1.75/44.40
3.50/89.00
4.00/102.00
0.63/16.00
1.75/44.40
3.50/89.00
4.00/102.00

18/80
50/220
120/540
50/220
18/80
30/135
60/267
30/135

100
Nylon

50
100

Polypropylene

50
100

Max. Wire
Marking Pad Size Tensile
Std.
Bundle
(in./mm)
Strength
Pkg.
Dia.
WxH
(lb./N)
(in./mm)

Ty-Rap® Cable Ties – Flame Retardant Nylon 6.6
TY23MFR
TY232MFR
TY24MFR
TY25MFR
TY28MFR
TY272MFR†
TY27MFR
TY53MFR
TY153MFR

3.62/91.95
8.00/203.20
5.50/139.70
7.31/185.67
14.20/360.68
8.00/203.20
13.20/335.28
4.00/101.60
4.35/110.49

Std.
Cat. No.

Bulk
Cat. No.

0.09/2.29
0.09/2.29
0.14/3.56
0.18/4.57
0.18/4.57
0.27/6.86
0.27/6.86
0.09/2.29
0.10/2.54

0.63/16.00
2.00/50.80
1.13/28.70
1.75/44.45
4.00/101.60
2.00/50.80
3.50/88.90
0.63/16.00
0.63/16.00

Length
(in./mm)

18/80.07
40/177.90 1,000
N/A

50/222.40
120/533.80

0.81 x 0.36/20.57 x 9.1
0.78 x 1/19.81 x 14.00

500
18/80.07

Body
Max. Wire Tensile
Std. Bulk
Width Bundle Dia. Strength
Pkg. Pkg.
(in./mm) (in./mm)
(lb./N)

Ty-Rap® Nylon 12 Cable Ties – Ultraviolet and weather-resistant!
TYC525MX
–
–
TYC527MX
–

Cat. No.

Engineered to withstand high temperatures!

3.62/91.95
7.31/186.00
13.40/340.00
14.20/36.00
3.62/91.90
7.31/186.00
13.40/340.00
14.20/36.00

TYC25MX
TYC28MX
TYC272MX
TYC27MX
TYC29MX

7.31/185.67
0.18/4.57
14.20/360.68
8.00/203.20
0.27/6.86
13.20/335.28
30.00/762.00 0.30/7.62

Length
(in./mm)

Body
Width
(in./mm)

1.75/44.45
4.00/101.60
2.00/50.80
3.50/88.90
9.00/228.60

Max. Wire
Bundle Dia.
(in./mm)

100

35/155.70

1,000

–
85/378.10

50
–

Tensile
Strength
(lb./N)

500

Std.
Pkg.

Ty-Rap® Heat Stabilized Ties
TYH23M
TYH232M
TYH24M
TYH242M
TYH26M
TYH25M
TYH253M
TYH28M
TYH27M
TYH272M
TYH29M

3.62/91.95
8.00/203.20
5.50/139.70
8.19/208.03
11.10/281.94
7.31/185.67
11.40/289.56
14.20/360.68
13.20/335.28
8.75/222.25
30.00/762.00

0.09/2.29
0.14/3.56

0.18/4.57
0.27/6.86
0.30/7.62

0.63/16.00
2.00/50.80
1.13/28.70
2.00/50.80
3.00/76.20
1.75/44.45
3.00/76.20
4.00/101.60
3.50/88.90
2.00/50.80
9.00/228.60

18/80.07
40/177.90
1,000

30/135
50/222.40

120/533.80

500

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Cable Ties for Special Environments

Body
Width
(in./mm)

Cat. No.

Many factors combine to determine the useful life of a cable
tie, but none is as important as chemical exposure.
Polypropylene cable ties are ideally suited for chemical
environments.

Length
(in./mm)

Max. Wire
Bundle Dia.
(in./mm)

Tensile
Strength
(lb./N)

0.63/16.00
1.75/44.45
4.00/101.60
3.5088.90

30/133.40

Std.
Pkg.

Ty-Rap® Weather-Resistant Polypropylene Ties
TYP23MX
TYP25MX
TYP28MX
TYP27MX

0.09/2.29
0.18/4.57
0.27/6.86

3.62/91.95
7.01/178.05
13.92/353.57
13.17/334.52

18/80.07

60/266.90

1,000
500

Colour – Black

Std.
Cat. No.

Ty-Rap® cable ties, made of Halar ®, are designed for use in
air-handling spaces. Due to its UL 94V-O flammability rating
and low-smoke density characteristics, Halar® material is
most suitable in applications where flame resistance and
smoke generation is a concern.

Body
Max. Wire
Tensile
Length
Std. Bulk
Width
Bundle Dia. Strength
(in./mm)
Pkg. Pkg.
(in./mm)
(in./mm)
(lb./N)

Halar®* Cable Ties
TYV523M**
TYV525M(1)

TYV23M**
TYV25M(1)

0.09/2.29 3.62/91.95
0.18/4.57 7.31/185.67

0.63/16.00
1.75/44.45

18/80.07
50/222.40

100

1,000

* Solvay Solexis, Inc. registered trademark.
Colour – Maroon
** CSA Certified Natural 6/6 Nylon Cable Ties are suitable for use in air handling spaces in accordance with rules 12-010
(3), (4) and (5), and 12-020 of the CEC.
(1)

Std.
Cat. No.

Fluoropolymer cable ties offer high-radiation resistance and
temperature stability to 338°F. Also, fluoropolymer provides
excellent resistance to ultraviolet light and meets UL
flammability rating 94V-O.

Bulk
Cat. No.

Bulk
Cat. No.

Body
Width
(in./mm)

Max. Wire Tensile
Lentgh
Std. Bulk
Bundle Dia. Strength
(in./mm)
Pkg. Pkg.
(in./mm)
(lb./N)

Ty-Rap® Nylon 12 Cable Ties – Ultraviolet and weather-resistant!
TYZ523M**
TYZ525M(1)
TYZ528M
TYZ527M

TYZ23M**
TYZ25M(1)
TYZ28M
TYZ27M

0.09/2.29
0.18/4.57
0.18/4.57
0.27/6.86

3.62/91.95
7.31/185.67
14.19/360.43
13.38/339.85

0.625
1.750
4.000
3.500

18/80.07
50/222.40
50/222.40
120/533.80

100
50

1,000
500
100

Colour – Aqua
** CSA Certified Natural 6/6 Nylon Cable Ties are suitable for use in air handling spaces in accordance with rules
12-010 (3), (4) and (5), and 12-020 of the CEC.
(1)

w w w. t n b. c a

C17

Ty-Rap

®

Fastening Products

Stainless Steel Cable Ties and Accessories

After wrapping the object to be tied, insert the free
end of the tie through the buckle and into the tool.

Squeeze the handle of the tool to create the dual
lock and cut off the tail.
The cable tie forms a low-profile dual lock.

• The tail is formed into a fold lock behind the buckle
• The tool forces a dimple in the band into a hole in the buckle

Dual Lock
Thomas & Betts has a complete package of stainless steel cable ties and
accessories that are easy to apply and superior in quality. These products
have been designed for tying, lashing and identification applications in
demanding environments such as boiler rooms, chemical plants, refineries,
pulp/paper mills, shipyards and offshore oil platforms. They are made of a
variety of high-quality stainless steel materials which offer excellent
corrosion resistance, high temperature and durability characteristics. There
is also a variety of high-quality installation and identification tools to
complete your cable tie accessory needs.
For cable bundling, I.D. tags and other general bundling applications –
especially in hazardous environments – Thomas & Betts Stainless Steel
Cable Ties provide a strong, safe, permanent installation with a unique, dual
lock.
The Type 304 stainless steel ties are completely fireproof – no toxic fumes,
no sagging cables. They are extremely resistant to corrosion and UV light,
with the ability to withstand the harshest temperature extremes. Yet they
are surprisingly economical.

The low-profile ties are fast and easy to apply. A quick squeeze of the
installation tool forms two strong locks– a dimple lock and a fold lock.
Their two-piece configuration adds to its versatility. Available in standard
lengths to wrap bundle diameters from 1 to 10 inches, Thomas & Betts
Stainless Steel Cable Ties can be supplied in other lengths on special order.
Low-profile Thomas & Betts Stainless Steel Ties are fireproof and resist
corrosion, UV light and extreme weather conditions for safe, permanent
cable bundling.
Installation Hand Tool
The installation hand tool is a lightweight, pocket size hand tool which
quickly and easily applies the stainless steel cable ties.
To use, simply separate the pull-up handle from the body, push the release
lever down and insert the clamp tail as far as possible. Squeeze the pull-up
handle until the band is tight. Finally, move the pull-up handle to the
locking/cut-off position by moving it away from the body as far as it will go.
Then squeeze to form the dual lock and cut off the excess tail.

Catalogue Number System
CABLE TIE TYPE
SS = Two-piece solid stainless steel cable tie, Type 304
TYS = Multi-lock stainless steel cable tie, Type 316
SSR = Reusable stainless steel cable tie, Type 200/300

Cat. No.
SS10-250
SS17-250

Bundle Diameter

Tensile Strength

For Bundle
Dia. of
(in./mm)
2/51
4/101

Tensile
Strength
(lb./N)
200/890
200/890

Width

Length

Weight

Width
(in./mm)

Length
(in./mm)

Weight
(lb./kg)

0.25/6.35
0.25/6.35

10.0/254
16.5/419

1.1/4.89
1.8/8.00

SSH = Heavy-duty stainless steel clamp, Type 201
TS = Roller bar locking stainless steel cable tie, Type 302/304
LS = Ball locking stainless steel cable tie, Type 302/304/316

C18

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Stainless Steel Cable Ties and Accessories
SS - Two-Piece Solid
Strong, slip-free ties with
a unique dual lock

•
•

•

Low-profile, single wrap ties

No slipping

Dual locking mechanism

For Bundle
Dia. of
(in./mm)

Cat. No.

Tensile
Strength
(lb./N)

Width
(in./mm)

Length
(in./mm)

Weight
(lb./kg)

Std.
Pkg.

Mini Stainless Steel Cable Ties
SS7-180

1/25

6.5/165

0.70/0.32

SS10-180

2/51

10.0/254

0.90/0.41

SS16-180

4/102

16.0/406

1.40/0.64

SS23-180

6/152

22.5/572

1.85/0.84

SS29-180

8/203

29.0/737

2.35/1.07

100/444.8

0.18/4.5

100

Standard Stainless Steel Cable Ties
SS10-250

2/51

10.0/254

1.10/0.50

SS17-250

4/102

16.5/419

1.80/0.82

SS23-250

6/152

22.5/572

2.50/1.13

SS29-250

8/203

29.0/737

3.20/1.45

SS35-250

10/254

35.0/889

3.80/1.72

250/1,112

0.25/6.35

100

304 Stainless Steel
0.015 in. (0.38mm) Thickness
NOTE: Other lengths available on special request.
Add suffix -316 for 316 Stainless Steel.

Mini Tie Installation Tool
Perfect for mini-sized
stainless steel ties

•
•

Cat. No.

WTA290

w w w. t n b. c a

Description

Pocket-sized hand tool
for quick and easy cable
tie installations

Pocket-sized, light
weight
Applies mini-size stain
less steel ties

Weight
(lb./kg)

Hand tool to apply mini stainless steel cable ties;
easy-to-use tool applies tension, locks tie with
1.17/0.53
the dual lock, and cuts off band flush with top
surface of buckle

Standard Tie
Installation Tool

Std.
Pkg.
1

•
•

Lightweight
Applies standard-size
stainless steel ties

Cat. No.

Description

Weight
(lb./kg)

Std.
Pkg.

WTA250

Hand tool to apply standard stainless steel cable
ties; easy-to-use tool applies tension, locks tie
with the dual lock, and cuts off band flush with
top surface of buckle

1.17/0.53

1

C19

Ty-Rap

®

Fastening Products

Stainless Steel Cable Ties and Accessories
TYS - Multi-LokTM Self-Locking

Strong — holds in excess of 200 lb. —
and self locking

•
•
•
•

Corrosion-resistant, providing a
safe, strong, worry-free hold
Unique, self-locking, multiple–
locking system holds in excess of 200 lb.
Manufactured from Type 316
stainless steel
Available in two widths and various
lengths

Cat. No.

Tensile
Strength
(lb./N)

Type 316 Stainless Steel – Uncoated
TYS6-280
TYS9-280
TYS12-280
TYS18-280
TYS24-280
250/1,112
TYS6-470
TYS9-470
TYS12-470
TYS18-470
TYS24-470

Width
(in./mm)

0.28/7.00

0.47/12.00

Length
(in./mm)

Weight
(lb./kg)

6/150

0.66/0.30

9/225

0.99/0.45

12/300

1.32/0.60

18/450

1.76/0.80

24/610

2.64/1.20

6/150

1.10/0.50

9/225

1.65/0.75

12/300

2.20/1.00

18/450

2.97/1.35

24/610

4.29/1.95

Length
(in./mm)

Weight
(lb./kg)

6/150

0.66/0.30

9/225

0.99/0.45

12/300

1.32/0.60

18/450

1.76/0.80

24/610

2.64/1.20

6/150

1.10/0.50

Std.
Pkg.

100

0.010 in. (0.245mm) Thickness

How it works:
As the free end of the MultiLok tie passes through the
buckle, three separate teeth
(four teeth in the 12mm
Multi-Lok) mesh with
corresponding slots in the
band, automatically locking
the tie as it is being
tensioned.

•

•

Nylon 11 weather-resistant coating is
unaffected by UV sunlight, resistant to
corrosion, chemicals, weathering and
protects cable insulation
Coated with halogen-free, non-toxic
black nylon 11

Cat. No.

Tensile
Strength
(lb./N)

Width
(in./mm)

Type 316 Stainless Steel – Nylon 11 Coated
TYS6-280C
TYS9-280C
0.28/7.00
TYS12-280C
TYS18-280C
TYS24-280C
250/1,112
TYS6-470C
TYS9-470C
0.47/12.00
TYS12-470C
TYS18-470C
TYS24-470C

9/225

1.65/0.75

12/300

2.20/1.00

18/450

2.97/1.35

24/610

4.29/1.95

Std.
Pkg.

100

0.010 in. (0.245mm) Thickness

C20

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Stainless Steel Cable Ties and Accessories
SSR - Reusable
Ties to use and reuse with quickness and ease!

•
•
•
•

Made of high-strength, corrosion-resistant 200/300 Series
stainless steel
Coated with a non-toxic, halogen-free, low-smoke Nylon 11,
protecting cables from damage or interference due to direct
contact with the stainless steel
Nylon 11 is also chemical and weather-resistant, UV-protective,
extremely flexible at low temperature, user-friendly on installer’s
hands and easy on bundles
Unique buckle design for quick, easy application and re-use

1. Insert cable tie tail through holding tabs and locking emboss.
2. Bend cable tie tail up.
3. Insert cable tie tail back through holding tabs, creating as tight a
bend as possible. For increased tensile strength follow steps #4
and #5.
4. Bend cable tie tail up.
5. Fold cable tie tail over holding tabs.

Cat. No.

Tensile
Strength
(lb./N)

WTAE201
Tensioning Hook
(WTAE tools for use with type TYS – TYS C Series Cable ties)

Tensioning Tools
WTAE200
WTAE201
DAS250

w w w. t n b. c a

Length
(in./mm)

Reusable Stainless Steel Cable Ties – Coated
6/152
SSR6-250C
9/229
SSR9-250C
12/305
SSR12-250C
75/333.60
0.25/6.35
18/457
SSR18-250C
24/610
SSR24-250C
6/152
SSR6-375C
9/229
SSR9-375C
12/305
SSR12-375C
18/457
SSR18-375C
100/444.80 0.38/9.53
24/610
SSR24-375C
30/762
SSR30-375C
36/914
SSR36-375C

WTAE200
Cable Tie Tensioner

Cat. No.

Width
(in./mm)

Description

Weight
(lb./kg)

Std.
Pkg.

1.4/0.64
1.8/0.82
2.1/0.95
3.0/1.36
3.7/1.68
1.8/0.82

100

2.0/0.91
3.1/1.41
4.4/2.00
6.6/2.99
7.0/3.18
8.3/3.76

DAS250
Pistol Grip Tensioning Tool

Weight
(lb./kg)

Cable Tie Tensioner: For tensioning Reusuable Ties and Multi-Lok Ties

0.6/0.27

Tensioning Hook: For tensioning Reusuable Ties and Multi-Lok Ties

0.1/0.05

Pistol Grip Tensioning Tool: For installing Multi-Lok , Ball Lock, & Roller Bar Lock SS Ties

1.0/0.45

Std.
Pkg.

1

C21

Ty-Rap

®

Fastening Products

Stainless Steel Cable Ties and Accessories
SSH - Heavy Duty Clamp
Pre-assembled for
single or double
wrapping!
Cat. No.

Max. Dia.
Max. Dia.
Once Around Twice Around
(in./mm)
(in./mm)

Total
Length
(in./mm)

•
•

Double-wrapped clamps provide extra strength
Available in various lengths, widths, and thicknesses

Tensile Strength
Single Wrap
(lb./N)

Band
Width
(in./mm)

Band
Thickness
(in./mm)

450/2002

0.25/6.35

0.02/0.51

900/4003

0.38/9.53

1,400/6228

0.5/12.70

Weight
(lb./kg)

Std.
Pkg.

Heavy-Duty Free-End Stainless Steel Clamps — Type 201
SSH10-250
SSH16-250
SSH16-375
SSH18-500
SSH19-250
SSH21-625
SSH24-750
SSH27-250
SSH31-500
SSH34-250
SSH37-750
SSH44-375
SSH50-750
SSH56-625
SSH62-750
SSH69-625

2/50

–

10/25

3.5/88

1.5/38

16/40

4/101

2/50

18/45

5/127

2.5/63

19/48

450/2002

0.25/6.35

5/127

2.5/63

21/53

1,700/7562

0.63/15.88

6/152

3/76

24/60

2,000/8896

0.75/19.05

10.9/4.94

50

7/177

3.5/88

27/68

450/2002

0.25/6.35

0.02/0.51

4.6/2.09

100

8/203

4/101

31/78

1,400/6228

0.5/12.70

0.03/0.76

4.7/2.13

25

0.02/0.51

5.6/2.54

100

0.03/0.76
0.02/0.51
0.03/0.76

2.2/1.00
3.1/1.41
6.2/2.81
10.5/4.76
3.5/1.59
15.1/6.85

9/228

4.5/114

34/86

450/2002

0.25/6.35

10/254

5/127

37/93

2,000/8896

0.75/19.05

7.6/3.45

12/304

6/152

44/112

900/4003

0.38/9.53

3.6/1.69

14/355

7/177

50/127

2,000/8896

0.75/19.05

16/406

8/203

56/142

1,700/7562

0.63/15.88

18/457

9/228

62/157

2,000/8896

0.75/19.05

11.6/5.26

20/508

10/254

69/175

1,700/7562

0.63/15.88

10.7/4.86

0.03/0.76

100

9.7/4.40
9.0/4.08

25

Type 201 Stainless Steel
Other Free-End Clamp sizes and metals are available on special order.

Apply tension, cut and secure with confidence!

WTJ020
Lightweight pocket-sized toll to install 1/4 in. and
3/8 in. wide Free-End Clamps. This tool also applies
tension and has a built-in cutter.
Cat. No.

Installation Tools
WTJ020
WTC075
WTC001

C22

WTC075
Designed to install 1/4 in. to 5/8 in. wide Free-End
Clamps. The lightweight, rachet-action tool tension
cuts and secures the buckle tab.
Description

WTC001
A drop-forged tool with tensioning capability
to do all 1/4 in. to 3/4 in. Free-End Clamp
sizes.
Weight
(lb./kg)

Compact Free End Stainless Steel Cable Tie Installion Tool for 1/4 in. to 3/8 in. sizes

1.1/0.50

Pistol Grip Free End Stainless Steel Cable Tie Installation Tool for 1/4 in. to 5/8 in. sizes

2.6/1.18

Free End Stainless Steel Cable Tie Installation Tool for all sizes

4.4/2.00

Std.
Pkg.

1

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Stainless Steel Cable Ties and Accessories
Speciﬁcations
Width
(in./mm)

Cat. No.

Length
(in./mm)

Thickness
(in./mm)

Max. Dia.
Max. Dia.
Single Wrap Double Wrap
(in./mm)
(in./mm)

Specifications for Stainless Steel Ties
Mini Stainless
Steel Cable Ties

Standard Stainless
Steel Cable Ties

Reusable Stainless
Steel Cable Ties

Multi-Lok Ties — Uncoated

Multi-Lok Ties — Coated

Free-End Clamps

w w w. t n b. c a

SS7-180
SS10-180
SS16-180
SS23-180
SS29-180
SS10-250
SS17-250
SS23-250
SS29-250
SS35-250
SSR6-250C
SSR9-250C
SSR12-250C
SSR18-250C
SSR24-250C
SSR6-375C
SSR9-375C
SSR12-375C
SSR18-375C
SSR24-375C
SSR30-375C
SSR36-375C

Uncoated
TYS6-280
TYS9-280
TYS12-280
TYS18-280
TYS24-280
TYS6-470
TYS9-470
TYS12-470
TYS18-470
TYS24-470
SSH10-250
SSH16-250
SSH19-250
SSH27-250
SSH34-250
SSH16-375
SSH44-375
SSH18-500
SSH31-500
SSH21-625
SSH56-625
SSH69-625
SSH24-750
SSH37-750
SSH50-750
SSH62-750

0.18/4.50

0.25/6.35

0.25/6.35

0.38/9.53

6.5/165
10/254
16/406
22.5/572
29.0/737
10/254
16.5/419
22.5/572
29/737
35/889
6/152
9/229
12/305
18/457
24/610
6/152
9/229
12/305
18/457
24/610
30/762
36/914

0.02/0.51

1.7/43
2.8/71
4.7/119
6/152
8/203
2.1/153
4.3/109
6.5/165
8.5/215
10.5/265
1.5/38
2.5/63
3.4/86
5.4/137
7.3/185
1.5/38
2.5/63
3.4/86
5.4/137
7.3/185
9.1/231
11.0/280

(single
wrap
only)
–
–
(single
wrap
only)
N/A
1.1/28
1.5/38
2.5/64
3.5/89
N/A
1.1/28
1.5/38
2.5/64
3.5/89
4.4/112
5.3/135

Nylon 11 Coated
TYS6-280C
TYS9-280C
TYS12-280C
TYS18-280C
TYS24-280C
TYS6-470C
TYS9-470C
TYS12-470C
TYS18-470C
TYS24-470C

0.28/7.00

0.47/12.00

0.25/6.35

0.38/9.53
0.5/12.70
0.63/15.88

0.75/19.05

6/152
9/229
12/305
18/457
24/610
6/152
9/229
12/305
18/457
24/610
10/250
16/400
19/480
27/680
34/860
16/400
44/1,120
18/460
31/780
21/530
56/1,420
69/1,750
24/600
37/940
50/1,270
62/1,570

0.01/0.25

0.02/0.51

0.03/0.76

1.9/48
2.8/71
3.8/96
5.7/144
7.6/193
1.9/48
2.8/71
3.8/96
5.7/144
7.6/193
2.0/50
3.5/88
5.0/127
70/177
9.0/228
3.5/88
12.0/304
4.0/101
8.0/203
5.0/127
16.0/406
20.0/508
6.0/152
10.0/254
14.0/355
18.0457

(single
wrap
only)

N/A
1.5/38
2.5/64
3.5/89
4.5/114
1.5/38
6.0/152
2.0/5.0
4.0/101
2.5/64
8.0/203
10.0/254
3.0/76
5.0/127
7.0/177
9.0/228

C23

Ty-Rap

®

Fastening Products
Speciﬁcations (cont’d)
Stainless
Steel Type

Cat. No.

Coating or
Finish

Min. Loop
Min. Loop
Tensile Strength
Application
Tensile Strength
Single Wrap
Tools Used
Double Wrap (lb./N)
(lb./N)

Max. Dia.
Single Wrap
(in./mm)

Specifications for Stainless Steel Ties (cont’d)
SS7-180
SS10-180
SS16-180
SS23-180
SS29-180
SS10-250
SS17-250
SS23-250
SS29-250
SS35-250
SSR6-250C
SSR9-250C
SSR12-250C
SSR18-250C
SSR24-250C
SSR6-375C
SSR9-375C
SSR12-375C
SSR18-375C
SSR24-375C
SSR30-375C
SSR36-375C

Uncoated
TYS6-280
TYS9-280
TYS12-280
TYS18-280
TYS24-280
TYS6-470
TYS9-470
TYS12-470
TYS18-470
TYS24-470
SSH10-250
SSH16-250
SSH19-250
SSH27-250
SSH34-250
SSH16-375
SSH44-375
SSH18-500
SSH31-500
SSH21-625
SSH56-625
SSH69-625
SSH24-750
SSH37-750
SSH50-750
SSH62-750

WTA290

100/445
304

Dull to Bright

WTA250

200/890

75/334

200/300

• Wire/cable
bundling
• I.D. tagging

(single wrap only)

300/1,334

Nylon 11 Coated
(Uncoated or other
colours available on
special order)

WTAE200

WTAE201
100/445

500/2,224
WTC075

• Reusable
• Cable bundling
• Oil rigs
• Telecommunications
towers
• Hazardous and
corrosive environments
• Cable trays

Nylon 11 Coated (cont’d)
TYS6-280C
TYS9-280C
TYS12-280C
TYS18-280C
TYS24-280C
TYS6-470C
TYS9-470C
TYS12-470C
TYS18-470C
TYS24-470C

WTAE200

316

Uncoated or Nylon
11 Coated Black

250/1,112

(single wrap only)

WTAE201

• Self-locking
• Cable bundling
• Hazardous and
corrosive environments

WTC075

201

Bright

450/2,002

1,200/5,338

900/4,003

2,400/10,675

1,400/6,227

3,300/14,678

1,700/7,562

4,000/17,792

2,000/8,896

5,000/22,240

WTJ020
WTC075
WTC001

WTC075
WTC001

• Industrial hoses
• Cable bundling
• High strength

WTC001

Ty-Rap® Stainless Steel Cable Ties have passed a variety of mechanical, environmental, and electrical tests. Other data can be made available upon request.
S.S. Series also available in (316) Stainless.

C24

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Stainless Steel Cable Ties
and Accessories
Tools and Accessories
Boiler rooms, shipyards, or off-shore oil platforms —
a match for any severe environment!

Body Width
(in.)

Cat. No.

Length (in.)

Max. Wire
Bundle Dia.
(in.)

Tensile
Strength
(lb.)

Std.
Pkg.

Ty-Rap® Stainless Steel Strap Cable Ties
•

Stainless steel strap cable ties have been
designed for high-temperature applications
and for use in areas of harsh, corrosive environments

TYS8

0.310

10.65

2

200

100

TYS14

0.310

14.65

4

200

50

•

Rated at 200-lb. tensile strength

TYS22

0.310

22.65

6

200

50

•

Smooth edges protect both the cable insulation
and the installer

TYS28

0.310

28.65

8

200

50

Note: Use WT3S Tool for tensioning and cutoff
Cannot be coated with any covering material
Made of 316 stainless steel

A perfect mate with cable ties for tensioning and cutoffs

1,000-ft. reel to cut your desired length!

WT3S
DAS250

Cat. No.

Description

Width
(in./mm)

Tensile
Strength
(lb./N)

Std.
Pkg.

200/889.60

1

Cat. No.

0.31/7.87

Stainless steel ties of virtually any length can be produced from the 1,000-ft. reel in
combination with the matching head.
Note: Use WT3S tool for tensioning and cutoff

WT3S

Installs strapping ties

DAS250

Installs multi-lok, ball lock, and roller bar lock
stainless steel ties

Lockable heads for stainless steel strapping

Cat. No.

Description

w w w. t n b. c a

Heads only for stainless strapping

1

Long-lasting anchor hold

Std.
Pkg.

Ty-Rap® Stainless Steel Strapping Locking Heads
TYS5200H

Std.
Pkg.

Ty-Rap® Stainless Steel Cable Tie Installation Tools

Ty-Rap® Stainless Steel Strapping on a Reel
TYS1000 1,000-ft. of strap, 2 reels of 500 ft. each

Description

Cat. No.

Description

Std.
Pkg.

Ty-Rap® Stainless Steel Mounting Base
50

TCS25

Mounting bases for stainless steel ties

50

C25

Ty-Rap

®

Fastening Products

Identify cable bundles with permanent,
stainless steel imprintable tags

•

S.S. Tape Embossing System

Apply Type 304 stainless steel tags
with stainless steel cable ties
Easy-to-use — slip a tie through
the slots in the tag and fasten with
the installaton tool
Works with 1⁄4 in. wide ties

•
•
•
Cat. No.

Stainless Steel Cable Ties and
Accessories

0.015 in. Thickness

Width
(in./mm)

Length
(in./mm)

Weight
(lb./N)

0.75/19.05

2.0/50.80

0.5/2.22

1.50/38.10

2.5/63.50

1.2/5.34

0.75/19.05

3.5/88.90

0.8/3.56

Std.
Pkg.

I.D. Tagging System
SSID100
SSID101
SSID102

Weight
100

Cat. No.

Description

lb.

kg

2.57
0.18

1.17
0.01

S.S. Tape Embossing System

Packaging Quantity: 100/box
Note: Customized pre-embossed tags are available. Please consult Regional Sales
Office for details.
Add suffix (316) for 316 Stainless Steel.

WTID400
WTID405

Hand-held tool for embossing S.S. I.D. Tap
Replacement S.S. tape (21’ long. 1/2” wide)

No second guessing — quickly and
accurately position I.D. tags!

•
•

Imprint Thomas & Betts stainless
steel I.D. tags
Includes special tag holder for
secure positioning and a 3/32 in.
character imprinting wheel,
standard (no substitutions
allowed)

Cat. No.

Description

Weight
(lb./N)

I.D. Tagging System
WTID200
WTID290
WTID281
WTID283
WTID204

I.D. Tag Imprinter

29.5/131.2

3/32 in. Character Imprinting Wheel
1/8 in. Character Imprinting Wheel
3/16 in. Character Imprinting Wheel

–

(Kit) WTID200 and WTID283

Packaging Quantity: 1/box

C26

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Stainless Steel Cable Ties and Accessories
Engineered to withstand the
harshest environments!

LS - Heavy-Duty Ball-Lock Mechanism

LS-7.9-200-C
LS-4.6-200A
These one-piece, self-locking stainless steel cable ties offer quick and easy installation —
no crimping or folding required — and a strong, reliable lock. Choose among a variety of
sizes and materials to meet all of your wire and cable bundling needs, even in the most
extreme environments.

Fast, easy installation

•
•
•
•

Self-locking — no time-consuming crimping or folding required
Stainless steel ball in low-profile, wedge-shaped head locks tie securely in place
Angled tail enables fast, easy insertion

Typical Applications

•
•
•
•
•

Petrochemical processing
Shipbuilding
Food and beverage processing
Pharmaceutical processing

Specifications

Rounded edges and smooth surfaces protect installer’s hands

•

Wide range of sizes

•
•

Offshore drilling

Six standard lengths cover most applications with custom lengths available
Two standard widths offer tensile strength of 100 lb. (444.8 N) or 250 lb. (1,112 N)

•

Operating Temp. Range:
Uncoated: -112ºF to 1,000ºF (-80ºC to 538ºC)
Coated: -40ºF to 302ºF (-40ºC to 150ºC)
Approvals/Standards: UL, CE, Lloyd’s Register,
Germanischer Lloyd, American Bureau of Shipbuilding,
Det Norske Veritas, RoHS compliant

Three materials suit a variety of environments

•
•
•

Application Tool
302/304 grade stainless steel for standard applications
316 grade (marine-grade) stainless steel for extra corrosion resistance
316 grade (marine-grade) stainless steel, fully coated with low-smoke,
halogen-free polyester to withstand continuous exposure to salt spray, sunlight,
petroleum and chemicals

DAS-250 Hand Tool
(adjustable tension,
automatic cut off)

Ordering Information
Cat. No.
Uncoated
302/304 Grade
Stainless Steel

Cat. No.
Uncoated
316 Grade
Stainless Steel

Cat. No.
Fully Coated
316 Grade
Stainless Steel

Length
(in./mm)

LS-4.6-200A
LS-4.6-360A
LS-4.6-520A
LS-4.6-680A
LS-4.6-840A
LS-7.9-200A
LS-7.9-360A
LS-7.9-520A
LS-7.9-680A
LS-7.9-840A
LS-7.9-1010A

LS-4.6-200B
LS-4.6-360B
LS-4.6-520B
LS-4.6-680B
LS-4.6-840B
LS-7.9-200B
LS-7.9-360B
LS-7.9-520B
LS-7.9-680B
LS-7.9-840B
LS-7.9-1010B

LS-4.6-200C
LS-4.6-360C
LS-4.6-520C
LS-4.6-680C
–
LS-7.9-200C
LS-7.9-360C
LS-7.9-520C
LS-7.9-680C
–
–

7.9/201
14.2/360
20.5/520
26.7/679
33.0/838
7.9/201
14.2/360
20.5/520
26.7/679
33.0/838
41.3/1050

w w w. t n b. c a

Width
(in./mm)

0.18/4.6

0.31/7.9

Max. Bundle Dia.
(in./mm)
2/51
4/102
6/152
8/203
10/254
2/51
4/102
6/152
8/203
10/254
12.5/318

Tensile
Strength
(lb./N)

Std.
Pkg.

100/445

100

250/1,112

50

C27

Ty-Rap

®

Fastening Products

DELTEC™ Cable Support System
Lashing Straps and Accessories
Strong, long-life and cost-saving method of securing communication cables
The Deltec™ Cable Support System is a user-friendly product designed to provide ease and flexibility
in fastening communications cables to messenger strand. It is equally well suited for copper conductor
cable, coaxial cable, fiber optic cable and innerduct in aerial applications.
The Deltec™ system answers your aerial cable needs with innovative design and state-of-the-art
materials. This system includes weather-resistant acetal cable straps, marine grade locking devices,
and base hanger accessories for specific applications where mounting is required.
Pre-assembled Deltec™ cable straps are available in standard lengths of 10 in. (254 mm), 13.5 in.
(342.9 mm), and 27 in. (685.8 mm). Convenient 50 ft. (15.24 m) to 3500 ft. (1066.8 m) reels where
specific lengths need to be established by the installer in the field are available. Additional “standard”
lengths can be established for applications where higher volumes prevail.

Advantages of the Deltec™ System Include:

•
•
•
•
•
•
•
•
•
•
•

C28

Proven years of service
No sharp edges — craft friendly Cable friendly!
Ease of installation — one wrap, no re-treading or re-strap
Lowers installation costs
High tensile strength after fastening
Total flexibility in lengths when using reel
Stackable spacers accommodate all cable sizes — no need to stock multiple sizes of individual
height spacers
Spacer designed to retain strap on each side and cradle the cable, providing restricted
movement of spacer and preventing damage to cable
In situations where multiple cables are supported, the T&B® TCP360 stackable spacer may be
rotated 90° and installed similarly to a single cable, yet provide the same restricting features
(unlike those commonly used today)
Month and year of manufacture stamped into strap material
Squirrels and vermin won’t eat it!

w w w. t n b. c a

Ty-Rap

®

Fastening Products

DELTEC™ Cable Support System
Lashing Straps and Accessories
Specifications

•
•
•
•
•
•
•
•

Strap and Body: Weatherable acetal; offers superior resistance to
sunlight, moisture, and salt environments
Locking Device: Marine-grade corrosion-resistant silicon copper alloy
Deltec System Temperature Range: -30ºF to 150ºF; (-34ºC to 66ºC)
Minimum Tensile Strength: 250 lb. minimum (1,211 N)
Outdoor Life: Designed to last a minimum of 20 years
Continuous Load: 20 lb. (9.07 kg)
Continuous Use Temperature: -85ºF to 194ºF; (-65ºC to 90ºC)
Colour: Black

Extra security!
The recommended maximum continuous static loading for the
Deltec™ straps is 20 lb. per strap. For best results, suggested
spacing is 15 in. It’s the responsibility of the user to determine
whether or not their application meets our recommendation.

Cat. No.

Note: Use WT3D Tool for tensioning and cutoff.

Body
Width
(in./mm)

Max. Wire
Length
(in./mm)

TYD10M

10/254.00

3/76.20

TYD510M

51.2/1300.48

16/406.40

13.5/342.90

3.5/88.90

27/685.80

8/203.20

0.5/12.70

TYD5270M

One spacer for any cable size!

•

Tensile
Strength
(lb./N)

Std.
Pkg.

Stainless Steel Strap Cable Ties

TYD5135M

•
•

Bundle
Dia.
(in./mm)

Stackable for any desired spacing
Less inventory — one catalogue
number
1/2 in. high

Cat. No.

25
240/1,112

Description

50
25
10

Std.
Pkg.

Modular Stackable Cable Spacers
TCP5255

Modular Stackable Spacer for Deltec™ Straps

25

TCP360

For Coaxial Cable

100

Made of weather-resistant polypropylene
Colour — Black

Heads for Deltec™ strap!
Cat. No.

Description

Std.
Pkg.

Locking Heads
Made of weatherable acetal
Colour — Black

w w w. t n b. c a

TYD-LH
696-41795

Heads only for Deltec™ Strap

25
1,000

C29

Ty-Rap

®

Fastening Products

DELTEC™ Cable Support System
Lashing Straps and Accessories (cont’d)
Secures cables to all types of
surfaces!
Cat. No.

CSS-H

Description

Std. Pkg.

Deltec™ Base and Hanger

CSS-B

CSS-B

Base for Deltec™ Strap

CSS-H

Hanger for Deltec™ Strap

50

Made of zinc-plated steel

Install ties easily!

Cat. No.

Description

Convenient and easy to use!

Cat. No.

Std. Pkg.

Description

Installation/Cutting Tool
WT3D

Installs self-locking Ty-Rap® cable ties and
Thomas & Betts lashing ties

Tensile
Strength
(lb./N)

Body
Width
(in./mm)

Std.
Pkg.

250/1,112

0.50/12.70

1

Deltec™ Strap Dispenser on Reels
TYD-50R

25

50' Reel of Strap

696-41794 1,000' Reel of Strap
696-41952 3,500' Reel Reel of Strap

Resistant to UV light,
chemicals, and lower in
moisture absorption

Nylon 12 is a lower, moisture-absorbing material than
6.6 nylon — making the effect of water on properties
much less.

Weather-Resistant, Nylon 12 Messenger
Hanger Straps (releasable)

Cat. No.

Body
Width
(in./mm)

Length
(in./mm)

Max. Wire
Tensile
Hook
Bundle Dia.
Strength
Material
(in./mm)
(lb./N)

Std.
Pkg.

Weather-Resistant Nylon 12 Messenger Hanger Straps (Releasable)
TYM5412X
TYM5418X
TYM5423X
TYM5430X
TYM5436X
TYM5412X-S
TYM5418X-S
TYM5423X-S
TYM5430X-S
TYM5436X-S

0.5/12.7

12/304.8
18/457.2
24/609.6
30/762.0
36/914.4
12/304.8
18/457.2
24/609.6
30/762.0
36/914.4

3/76.2
5/127
7/177.8
9/228.6
11/279
3/76.2
5/127
7/177.8
9/228.6
11/279

200/889.6

50
25
25
25
25
50
25
25
25
25

200/889.6

50
25

Bronze

Stainless
Steel

Weather-Resistant Nylon 12 Hanger Strap (Releasable)
TY54407X
TY54413X

0.5/12.7

6.36/151.54
13.75/349.25

2/50.8
4/101.6

Steel

The recommended, maximum continuous static loading for the nylon 12 straps is 25 lb. per strap.
For best results, suggested spacing is 15 in. It’s the responsibility of the user to determine whether
or not their application meets our recommendation. Hook will accommodate 1/2 in. dia. messenger
wire. For use in temperatures ranging from -40ºF to 176ºF (-40ºC to 80ºC).
Colour — Black

C30

w w w. t n b. c a

Ty-Rap

®

Fastening Products

DELTEC™ Cable Support System
Lashing Straps and Accessories (cont’d)
Length: 19"

Carbon black prolongs the cable tie’s life —
UV protective, too!
Std.
Cat. No.

Bulk
Cat. No.

Body
Width
(in./mm)

Length
(in./mm)

Max. Wire
Bundle Dia.
(in./mm)

Tensile
Strength
(lb./N)

Std.
Pkg

Bulk
Pkg.

19/482.6

4.75/120.65

200/889.6

25

100

Heavy-Duty Lashing Tie (Releasable)
TY5409

TY409

0.5/12.7

Heavy-duty and made of weather-resistant nylon. For use in temperatures ranging from -40ºF to 176ºF (-40ºC to 80ºC).

An absolute in chemical environments when nylon isn’t
applicable
Chemical exposure directly affects the life of a cable tie making
polypropylene ties an ideal choice. Black is usable for outdoor use,
too.

Cat. No.

Body
Width
(in./mm)

Length
(in./mm)

Max. Wire
Bundle Dia.
(in./mm)

Tensile
Strength
(lb./N)

Std.
Pkg.

150/667.2

25
25
10
10

Weather-Resistant Polypropylene Lashing Tie (Releasable)
TY5418PX
TY5424PX
TY5442PX
TY5460PX

0.5/12.7

18/457.2
24/609.6
42/1066.8
60/1524

5/127
7/177.8
12/304.8
18/457.2

Weather-Resistant Polypropylene Hanger Lashing Tie (Releasable)
TY53418PX

0.5/12.7

18/457.2

5/127

150/667.2

25

Made of black weather-resistant polypropylene for outdoor use.
For use in temperatures ranging from -40ºF to 176ºF (-40ºC to 80ºC).

Messenger
wire

Spacer separating
cable bundles

w w w. t n b. c a

This one-inch long spacer allows you to
separate power and signal cables with a
single-hanger, lashing strap if desired. The
spacer is stackable so that you may
suspend the cable bundle at any desired
distance from the messenger wire in
order to keep the cable runs parallel.

Cat. No.

Description

Std.
Pkg.

Messenger Hanger Spacer
TC5254

1 in. long stackable spacer for messenger straps

50

C31

Ty-Rap

®

Fastening Products

Hook and Loop Fasteners
FO, FOL, FOS and FOR Series
New version available — UL94V-2 rated material

•
•
•
•

Wrap pre-determined
bundle diameters
using the convenient
slotted head!

Polymer buckles
provide added
strength and stability.

Max.
Bundle Dia.
(in./mm)

Length
(in./mm)

2.0/50.80

9/228.6

3.5/88.90

13/330.2

50/222.4

3.0/76.20
5.0/127.00

50/222.4

Width
(in./mm)

Std.
Pkg.

0.50/12.7
0.75/19.05
0.50/12.7
0.75/19.05

10

12/304.8
18/457.2

0.75/19.05

10

1.5/38.10
3.2/81.28
5.0/127.00

6/152.4
12/304.8
18/457.2

–

10

Various

180/4572

–

1

Screw
Size

Max. Tie
Width
Accom.

Std.
Pkg.

#8

0.75/19.05

500

*FO Series Loop Ties
40/177.9
50/222.4

FOL Series Buckle Ties
FOL300-50-0
FOL500-50-0

FOS Series Strip Ties
FOS150-50-0
FOS320-50-0
FOS500-50-0

FOL Series Buckle Ties

Screw and adhesive mounting bases provide multiple mounting
options

Min. Tensile
Strength
(lb./N)

Cat. No.

FO200-40-0
FO200-50-0
FO350-40-0
FO350-50-0

FO Series Loop Ties

High-quality Hook & Loop Fasteners designed specifically for
Thomas & Betts
Enables quick and convenient bundling of data and fiber optic
cables
Sizes available to accommodate varying bundle diameters

FOR Series Rolled Hook and Loop
FOR180-50-0
Pre-cut lengths make
bundling a cinch!

50/222.4

Black is standard colour.
Multiple colours available for identifying specific bundles
*Add — “FR’’ for UL94V-2 rated material, after colour choice.
Contact your Regional Sales Office for availability and delivery.

FOS Series Strip Ties
Rolled hook and loop
material enables
custom cut lengths,
avoiding waste.

FOR Series Rolled Hook
and Loop
Fasteners available in these colours: Black, Brown, Red, Orange,
Yellow, Green, Blue, Grey, and White.
Please consult Regional Sales Office for delivery and availability.

Two mounting bases designed for use
with hook and loop fasteners

Cat. No.

Description

Nylon 6.6 Mounting Bases
TC368
TC368A

2 in. x 2 in. Screw Mounted
2 in. x 2 in. Adhesive Mounted

-40ºF/-40ºC to 176ºF/80ºC
Natural nylon colour.

C32

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Material Selection Ordering Guide
Physical Properties of Cable Tie Materials
TABLE 2
Natural
66
Nylon

Weather
Resistant
66
Nylon

Heat
Stabilized
Natural 66
Nylon

Flame
Weather
Retardant Weatherable
Resistant
66
Acetal
Nylon 12
Nylon

Weather
Radiation
Resistant
Resistant
Polypropylene Fluoropolymer

Halar®
(2)

Stainless
Steel

90,000

Physical Properties of Ty-Rap® Cable Tie Materials
Tensile Strength (Yield)
@ 73ºF (Dry-As-Molded) (1)

psi

12,000

12,000

12,000

11,000

10,000

7,500

4,600

6,700

6,600

Flammability Rating

–

UL94V-2

UL94V-2

UL94V-2

UL94V-0

UL94HB

–

–

UL94V-0

UL94V-0

–

Radiation Resistance

rads

1 x 105

1 x 105

1 x 105

1 x 105

1 x 105

1 x 105

1 x 105

2 x 108

2 x 108

2 x 108

Ultraviolet Light Resistance

–

Poor

Good

Poor

Poor

Very Good

Good

Good

Excellent

Excellent

Excellent

Water Absorption (24 hrs)

%

1.3

1.2

1.4

1.4

0.25

0.25

0.1

<.01

<.01

None

Oxygen Index

–

28

28

31

34

21

–

–

30

52

–

Max. Continuous Use Temp.

F/C

185 / 85

185 / 85

221 / 105

185 / 85

185 / 85

176 / 80

185 / 85

338 / 170

284 / 140

1000 / 537

Min. Continuous Use Temp.

F/C

-40 / -40

-40 / -40

-40 / -40

-40 / -40

-40 / -40

-40 / -40

-40 / -40

-76 / -60

-50 / -46

-112 /

–

Natural

Black

Green tint

White

Black

Black

Black

Aqua

Maroon

Stainless

Colour

(1) ASTM D638-878 except stainless steel which is ASTME8
(2) Halar® is a trademark of Solvay Solexis, Inc.

Flammability ratings for selecting Ty-Rap® cable ties

Materials classed V-1

Note: These tests for flammability of plastic material are intended to serve as
a preliminary indication of acceptability with respect to flammability for
particular applications.

A material classed V-1 shall:
A. Not have any specimens that burn with flaming combustion for more
than 30 seconds after either application of the test flame.
B. Not have a total flaming combustion time exceeding 250 seconds for the
10 flame applications for each set of five specimens.
C. Not have any specimens that burn with flaming or glowing combustion
up to the holding fixture.
D. Not have any specimens that drip flaming particles that ignite the dry
absorbent surgical cotton located 12 in. below the test specimen.
E. Not have any specimens with glowing combustion that persists for more
than 60 seconds after the second removal of the test flame.

UL 94 vertical burn test procedures
Test specimens of the material, with dimensions 5 in. x 1/2 in., with the
thickness intended for use in the end product, are tested in both the
manufactured condition and in the aged state. The test requires that the
specimen be supported in a vertical fixture and a precisely controlled flame
applied for a 10 second period. The flame is removed and the duration of
flaming is noted. If the flame extinguishes, a second exposure to flame for 10
seconds is applied and duration of flaming is again noted. It is observed and
recorded whether or not test specimens drip flaming particles that ignite a
cotton swatch.

Materials classed V-0
A material classed V-0 shall:
A. Not have any specimens that burn with flaming combustion for more
than 10 seconds after either application of the test flame.
B. Not have a total flaming combustion time exceeding 50 seconds for the
10 flame applications for each set of five specimens.
C. Not have any specimens that burn with flaming or glowing combustion
up to the holding fixture.
D. Not have any specimens that drip flaming particles that ignite the dry
absorbent surgical cotton located 12 in. below the test specimen.
E. Not have any specimens with glowing combustion that persists for more
than 30 seconds after the second removal of the test flame.

w w w. t n b. c a

Materials classed V-2
A material classed V-2 shall:
A. Not have any specimens that burn with flaming combustion for more
than 30 seconds after either application of the test flame.
B. Not have a total flaming combustion time exceeding 250 seconds for the
10 flame applications for each set of five specimens.
C. Not have any specimens that burn with flaming or glowing combustion
up to the holding fixture.
D. Be permitted to have specimens that drip flaming particles that burn only
briefly, some of which ignite the dry absorbent surgical cotton placed
12 in. below the test specimen.
E. Not have any specimens with glowing combustion that persists for more
than 60 seconds after the second removal of the test flame.

C33

Ty-Rap

®

Fastening Products

Material Selection Ordering Guide
Chemical Resistance Chart (cont’d)
Table 3 shows the resistance of Ty-Rap® cable
tie materials to various chemicals. The table is
designed to help you determine the cable tie

material best suited for a particular chemical
environment.

TABLE 3

Reagents

Concentration

HeatStabilized 6/6
Nylon as Used in
TYH
Series

Halar®† as
Used in TYV
Series

Weatherable
Acetal as
Used in TYD
Series

Standard 6/6
Nylon as
Used in TY
Series

6/6 WeatherResistant
Nylon as
Used in TY
Series

6/6 FireRetardant
Nylon as
Used in TY
Series

Weather
Resistant
Nylon as
Used in TYH
Series

Polypropylene
as Used in TYP
Series

Weather
Resistant
Polypropylene
as Used in TYP
Series

Fluoropolymer
as Used in
TYZ
Series

Stainless
Steel
as Used in
TYS
Series

Resistance of Available Materials to Various Chemicals Temp 20°C (70°F)
Arsenic Acid

40%

–

–

–

–

–

–

–

E

E

–

E

Acetaldehyde

50%

S

–

–

S

S

S

–

–

–

–

–

Acetone

100%

E

E

F

E

E

E

E

E

E

E

E

AQ

–

E

–

–

–

–

–

E

E

E

E

100%

–

E

–

–

–

–

E

E

E

E

–

Ammonium Carbonate

5%

S

E

–

S

S

S

E

E

E

E

E

Ammonium Hydroxide

10%

E

E

F

E

E

E

–

E

E

E

E

Ammonium Nitrate

–

–

E

–

–

–

–

E

E

E

E

E

Ammonium Sulfate

10%

–

E

–

–

–

–

S

S

S

S

S

Barium Carbonate

Aluminum Hydroxide
Ammonia

100%

–

E

–

–

–

–

E

E

E

E

E

Barium Chloride

5%

NR

–

–

NR

NR

NR

E

E

E

E

E

Barium Sulfate

10%

E

–

–

E

E

E

E

E

E

E

E

Barium Sulfide

10%

S

–

–

S

S

S

E

E

E

E

E

Benzene

100%

E

E

F

E

E

E

E

S

S

E

E

Benzoic Acid

100%

NR

E

–

NR

NR

NR

E

E

E

E

E

Butyric Acid

50%

NR

E

–

NR

NR

NR

–

E

E

E

E

Calcium Carbonate

AQ

–

E

–

–

–

–

–

E

E

E

E

Calcium Hydroxide

20%

–

F

E

–

–

–

–

E

E

E

E

Calcium Hydrochlorite

2%

NR

–

–

NR

NR

NR

–

F

F

F

F

Calcium Sulfate

2%

–

E

–

–

–

–

–

E

E

E

E

Carbon Tetrachloride

100%

E

E

E

E

E

E

E

F

F

E

E

Chlorine (WET)

–

NR

–

–

NR

NR

NR

–

F

F

F

F

Chlorine (DRY)

–

NR

–

–

NR

NR

NR

–

NR

NR

F

F

Chloroacetic Acid

30%

NR

–

–

NR

NR

NR

–

–

–

F

F

Chloroform

100%

–

E

–

–

–

–

F

F

F

E

E

Chromic Acid

50%

NR

S

–

NR

NR

NR

–

F

F

F

F

Citric Acid

50%

S

E

E

S

S

S

E

E

E

E

E

Copper Cyanide

10%

–

E

–

–

–

–

–

E

E

E

E

Copper Nitrate

50%

–

E

–

–

–

–

–

E

E

E

E

–

–

E

–

–

–

–

–

E

E

E

E

Dichloroethane

100%

–

E

–

–

–

–

–

–

–

E

E

Diethyl Ether

100%

–

E

S

–

–

–

E

E

E

E

E

Ethyl Alcohol

100%

S

E

–

S

S

S

E

E

E

E

E

Cider

Halar® Trademark of Solvay Solexis, Inc.
Ratings
E = Excellent
S = Satisfactory
F = Fair
NR = Not Recommended
(AQ = Aqueous)

†

C34

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Material Selection Ordering Guide
Chemical Resistance Chart (cont’d)
TABLE 3 (con’t)

Reagents

Concentration

HeatStabilized 6/6
Nylon as Used in
TYH
Series

Halar®† as
Used in TYV
Series

Weatherable
Acetal as
Used in TYD
Series

Standard 6/6
Nylon as
Used in TY
Series

6/6 WeatherResistant
Nylon as
Used in TY
Series

6/6 FireRetardant
Nylon as
Used in TY
Series

Weather
Resistant
Nylon as
Used in TYH
Series

Polypropylene
as Used in TYP
Series

Weather
Resistant
Polypropylene
as Used in TYP
Series

Fluoropolymer
as Used in
TYZ
Series

Stainless
Steel
as Used in
TYS
Series

Resistance of Available Materials to Various Chemicals Temp 20°C (70°F)
Ethyl Chloride

100%

–

S

E

–

–

–

F

F

F

E

E

Ethylene Glycol

100%

E

E

S

E

E

E

–

E

E

E

E

Ferric Hydroxide

100%

–

E

–

–

–

–

–

E

E

E

E

Ferric Nitrate

10%

–

E

–

–

–

–

–

E

E

E

E

Ferrous Sulfate

10%

–

E

–

–

–

–

–

E

E

E

E

Fuel Oil

100%

–

E

–

–

–

–

E

–

–

E

E

Furfural

100%

–

E

–

–

–

–

–

F

F

E

E

AQ

–

E

–

–

–

–

–

–

–

E

E

Gasoline

100%

E

E

–

E

E

E

–

S

S

E

E

Glycerine

100%

–

E

–

–

–

–

E

E

E

–

E

Hydrocyanic Acid

100%

–

E

–

–

–

–

–

E

E

E

E

Hydrogen Peroxide

30%

NR

E

F

NR

NR

NR

S

E

E

E

E

Hydrogen Sulfide

Dry

NR

E

–

NR

NR

NR

E

E

E

E

E

Iodoform

100%

–

E

–

–

–

–

–

–

–

E

E

Isopropyl Alohol

100%

S

E

–

S

S

S

E

E

E

E

E

Jet Fuel

100%

E

E

–

E

E

E

–

S

S

E

E

Lactic Acid

10%

E

E

–

E

E

E

S

E

E

E

E

Lanolin

10%

E

E

–

E

E

E

E

E

E

E

E

Lead Acetate

5%

–

E

–

–

–

–

–

E

E

E

E

Linseed Oil

10%

E

E

E

E

E

E

E

E

E

E

E

Magnesium Carbonate

100%

–

E

–

–

–

–

E

E

E

E

E

Magnesium Chloride

10%

F

–

–

F

F

F

F

F

F

F

F

Magnesium Nitrate

100%

–

E

–

–

–

–

E

E

E

E

E

Gallic Acid

Malic Acid

AQ

–

E

–

–

–

–

–

E

E

E

E

Mercury

100%

–

E

–

–

–

–

E

E

E

E

E

Methyl Alcohol

100%

S

E

–

S

S

S

E

E

E

E

E

Methyl Chloride

100%

–

S

–

–

–

–

–

S

S

E

E

Methyl Ethyl Ketone

100%

–

E

F

–

–

–

E

E

E

E

E

Naptha

100%

–

E

–

–

–

–

–

E

E

E

E

Nitric Acid

30%

NR

E

NR

NR

NR

NR

–

E

E

E

E

Nitric Acid

30%-70%

NR

S

NR

NR

NR

NR

–

F

F

S

E

5%

–

E

–

–

–

–

–

F

F

E

E

Oieic Acid

100%

–

E

S

–

–

–

–

E

E

E

E

Oxalic Acid

10%

–

E

–

–

–

–

S

E

E

E

E

Paraffin

100%

E

E

–

E

E

E

E

E

E

E

E

Petroleum Ether

100%

–

E

–

–

–

–

E

F

F

E

E

Phenol

90%

NR

E

NR

NR

NR

NR

–

E

E

E

E

Phosphoric Acid

10%

NR

E

–

NR

NR

NR

–

E

E

E

E

Picric Acid

1%

–

E

–

–

–

–

–

E

E

E

E

Potassium Bromide

AQ

–

–

–

–

–

–

–

S

S

S

S

Nitrous Acid

Halar® Trademark of Solvay Solexis, Inc.
Ratings
E = Excellent
S = Satisfactory
F = Fair
NR = Not Recommended
(AQ = Aqueous)

†

w w w. t n b. c a

C35

Ty-Rap

®

Fastening Products

Material Selection Ordering Guide
Chemical Resistance Chart (cont’d)

Reagents

Concentration

HeatStabilized 6/6
Nylon as Used in
TYH
Series

Halar®† as
Used in TYV
Series

Weatherable
Acetal as
Used in TYD
Series

Standard 6/6
Nylon as
Used in TY
Series

6/6 WeatherResistant
Nylon as
Used in TY
Series

6/6 FireRetardant
Nylon as
Used in TY
Series

TABLE 3 (con’t)

Weather
Resistant
Nylon as
Used in TYH
Series

Polypropylene
as Used in TYP
Series

Weather
Resistant
Polypropylene
as Used in TYP
Series

Fluoropolymer
as Used in
TYZ
Series

Stainless
Steel
as Used in
TYS
Series

Resistance of Available Materials to Various Chemicals Temp 20°C (70°F)
Potassium Carbonate

–

E

–

–

–

–

–

E

E

E

E

–

Potassium Chlorate

AQ

–

E

–

–

–

–

S

E

E

E

E

Potassium Dichromate

40%

NR

E

–

NR

NR

NR

F

E

E

E

E

Potassium Ferrocyanide

25%

–

E

–

–

–

–

–

E

E

E

E

Potassium Hydroxide

5%

S

E

–

S

S

S

–

E

E

E

E

Potassium Iodide

100%

–

E

–

–

–

–

E

E

E

E

E

Potassium Nitrate

50%

F

E

–

F

F

F

E

E

E

E

E

Potassium Permanganate

5%

NR

E

S

NR

NR

NR

NR

E

E

E

E

Potassium Sulfate

5%

–

E

–

–

–

–

E

E

E

E

E

Potassium Sulfide

AQ

–

E

–

–

–

–

–

E

E

E

E

Propyl Alcohol

100%

E

E

–

E

E

E

–

E

E

E

E

Silver Nitrate

10%

–

E

–

–

–

–

E

E

E

E

E

Sodium Acetate

60%

E

E

–

E

E

E

–

E

E

E

E

Sodium Bicarbonate

100%

E

E

–

E

E

E

E

E

E

E

E

Sodium Bisulfate

10%

–

E

E

–

–

–

E

E

E

E

E

Sodium Borate

100%

–

E

–

–

–

–

–

E

E

E

E

Sodium Carbonate

5%

E

E

S

E

E

E

E

E

E

E

E

Sodium Chlorate

25%

–

E

E

–

–

–

S

E

E

E

E

Sodium Chloride

2%

E

E

S

E

E

E

E

E

E

E

E

Sodium Fluoride

5%

–

–

–

–

–

–

–

F

F

F

F

Sodium Hydroxide

10%

E

E

S

E

E

E

E

E

E

E

E

Sodium Hyposulfite

AQ

–

E

–

–

–

–

–

–

–

E

E

Sodium Nitrate

5%

E

E

–

E

E

E

E

E

E

E

E

Sodium Nitrite

AQ

–

E

–

–

–

–

S

E

E

E

E

Sodium Perchlorate

10%

–

E

–

–

–

–

–

–

–

E

E

Sodium Phosphate

5%

–

E

–

–

–

–

E

E

E

E

E

Sodium Sulfate

5%

S

E

–

S

E

E

E

E

E

E

E

Sodium Thiosulfate

5%

–

–

S

–

–

–

S

S

S

S

S

Stearic Acid

100%

–

E

–

–

–

–

F

E

E

E

E

Sulfur

100%

–

E

–

–

–

–

E

E

E

E

E

Sulfur Dioxide

100%

NR

E

–

NR

NR

NR

E

E

E

E

E

Sulfuric Acid

Conc.

NR

E

NR

NR

NR

NR

–

S

S

E

E

Sulfuric Acid

5%

NR

F

F

NR

NR

NR

F

F

F

F

F

Tannic Acid

10%

–

E

–

–

–

–

–

E

E

E

E

Tartaric Acid

50%

–

E

E

–

–

–

E

E

E

E

E

Tetrahydrofuran

100%

–

F

E

–

–

–

S

F

F

E

E

Toluene

100%

E

E

F

E

E

E

E

F

F

E

E

Xylene

100%

E

–

–

E

E

E

E

F

F

E

E

Zinc Chloride

70%

F

E

NR

F

F

F

E

E

E

E

E

Zinc Nitrate

AQ

–

E

–

–

–

–

E

E

E

E

E

Zinc Sulfate

AQ

–

E

–

–

–

–

E

E

E

E

E

Halar Trademark of Solvay Solexis, Inc.
Ratings
E = Excellent
S = Satisfactory
F = Fair
NR = Not Recommended
(AQ = Aqueous)

†

C36

®

w w w. t n b. c a

Catamount

®

Fastening Products

Cable Ties
•
•
•
•
•
•
•
•
•
•
•
Strict Tolerances
Assure Locking
Strength

Recessed
Entry to
Guide
Insertion

Miniature
Heavy Duty
Intermediate
Extra Heavy Duty
Standard
Releasable Ties
Mounted Head
Striped Ties
Restricted Bundle
Identification Ties
Mil-Spec Ties

Reinforced Head and
Strap Transition for
Added Strength

Catamount® Cable Ties are available in lengths from 4 in. to our
exclusive 48 in. strap. Cable Ties will satisfy bundling requirements from
1/16 in. to 15 in. and loop tensile strengths from 18 to 175 pounds.
Cable Ties are stocked in materials and colours as listed. Contact your
Regional Sales Office for availability in special colours.
Where applicable, Catamount® Cable Ties are UL Recognized, Mil-Spec
Approved and/or QPL Listed.
State-of-the-art robotic and raw material handling equipment assures
product and material integrity throughout the manufacturing process.
Overall quality is achieved through statistical analysis and quality driven
operator objectives.
Catamount® has attained Mil-Spec I-45208 quality ratings from a number
of equipment manufacturers.
Catamount® products are sold through stocking T&B® Distributors.

Highly Engineered Tooth
and Pawl Design for
Maximum Engagement

Generous Radii on All
Angles to
Reduce Friction

Miniature (Page C40)

Bent Tip Design for
Easier Assembly

Gradual Strap to Tail
Transition for Lower
Insertion Force

Raised Grips on
Tail to Assist
Operators

Intermediate (Page C40)

Standard (Page C40)

Heavy-Duty (Page C40)

Extra Heavy-Duty (Page C40)

Mounting Head (Page C41)

Releasable (Page C41)

Mil-Spec (Page C43)

Push Mount (Page C41)
I.D. Ties (Page C42)
Striped (Page C44)

w w w. t n b. c a

C37

Catamount

®

Fastening Products

Cable Ties
Catalogue Number Construction

L

4
Length

Product Prefix
P - Plain Bagged Cable Ties
L - Cable Ties

18
Tensile Strength
18 lb.
30 lb.
40 lb.
50 lb.
120 lb.
175 lb.
250 lb.

MP NY

-

Material
Nylon
TZ - Fluoropolymer
PV - PVC
PE - Polyethylene
FR - Flame Retardant
TL - Teflon
Product Prefix
MP - Mounting Pad
ID - Identification
S# - Strapping Thickness
MC - Mounting Cradle
PM - Push Mounts
SM - Screw Mounts
N# - Plain-Edged Cable Clamps / Width
W# - Self-Aligning Cable Clamps / Dia.
UL - Adjustable Cable Clamps
GG - Gator Grip
FA - Flat Adhesive Clip
FS - Flat Screw Clip
FR - Flat Rubber Adhesive Clip
MS - Snap Mount
RA - Round Adhesive Clip
SR - Spiral Wrap
GS - Grommeting
GR - Extruded Grommeting
GRU - Extruded Grommeting Uncut

C38

HS

–

9

Type of Product
Nylon 66 - Leave Blank
Heat Stabilized - HS
(Black and Natural Colour Only)
Fluorescent - FL
Mounting Head - MH
Pushmount - PM
Pushmount Releasable - PMR
Releasable - R
Restricted Bundle - TB
Identification - ID

750
Size / #
.75"

-

Colour
See Colour
Table

9
Colour

See Colour
Table

M
Quantity
Q - 25 pack
L - 50 pack
C - 100 pack
D - 500 pack
M - 1,000 pack

C
Quantity
Q - 25 pack
L - 50 pack
C - 100 pack
D - 500 pack
M - 1,000 pack

Colour Table
0 – Black
(Weather-Resistant)
1 – Brown
2 – Red
3 – Orange
4 – Yellow
5 – Green
6 – Blue

7 – Purple
8 – Grey
9 – Natural
11 – Fluorescent Pink
16 – Fluorescent Orange
17 – Fluorescent Yellow
18 – Fluorescent Green
20 – Fluorescent Blue

w w w. t n b. c a

Catamount

®

Fastening Products

Cable Ties

ASTM
Property
Method
Materials for Molded Assembly Hardware
Tensile Strength
D638
Elongation at Break
D638
Yield Strength
D638
Shear Strength
D732
Deformation Under Load

D621

IZOD Impact

D256

Tensile Impact Strength

D1822

Melting Point
Thermal Linear Expansion
Thermal Conductivity
Brittleness Temperature

D789
D696
–
D746

Oxygen Index

D2863

UL Flammability

UL 94

•
•
•

Heat
Stabilized
Nylon

UV Black Nylon

Test Condition

Units

Molded 6/6
Nylon

+73°F; 50% RH
+73°F; 50% RH
+73°F; 50% RH
Dry As Molded (DAM)
2,000 psi
+122°F; DAM
+73°F; 50% RH
+73°F; Long
Specimen; DAM
Fisher-Johns
DAM
DAM Conche-Fitch
50% RH
DAM
50% RH
DAM
50% RH

kpsi
%
kpsi
kpsi

11.2
Z300
8.5
9.6

11.2
Z300
8.5
9.6

9.0
200
9.0
10.5

%

1.4

1.4

1.2

ft. lb./in.

2.1

2.1

2.0

ft. lb./in.2

240

240

N.R.

°F
in./in./°F
BTU - in/h . ft2 . °F
°F

491
4 x 10-5
1.7
-85
28
31
V-2
V-2

491
4 x 10-5
1.7
-85
28
31
V-2
V-2

491
N.R.
1.7
-62
25
31
V-2
V-2

%02
–
–

Material data as provided by our suppliers
N.R. = Not Reported
Tests conducted on 1/4 in. specimens

About Nylon…
Nylons possess an outstanding balance of properties combining strength, moderate stiffness, high service temperature and a high level of toughness. Nylon is
particularly resistant to repeated impact, has a low co-efficient of friction and excellent abrasion resistance.
Nylon is resistant to fuels, lubricants and most chemicals, but is attacked by phenols, strong acids and oxidizing agents. Contact your Regional Sales Office for
chemical data relative to your application.
Nylon is inherently susceptible to environ mental conditions. Catamount® Cable Ties are moisturized to optimum performance levels at machine-side and
should be stored in cool dry areas out of direct sunlight. Cable Ties are packaged in plastic bags to contain moisture and should remain sealed until ready
for use.
Sample
Thickness
(in.)

UL
Flammability

Energy
Source

Specific Optical Density
at Maximum
at 2 Minutes
Smoke Accumulation

NBS Smoke Generation for 6/6 Nylon
1/16

94 V-2

Radiant
(2.5 watts/sq cm)

13

0

1/8

94 V-2

Radiant Plus
Flaming Gas Jets

26

1

Results as provided by National Bureau of Standards (NBS). Results may not be
directly correlated with larger fires, such as burning buildings. Materials should be
tested to your application.

w w w. t n b. c a

Temperature Index
Hot Wire
Mechanical
Ignition (sec)
Electrical (°C)
w/o Impact (°C)
Temperature Index for Molded Nylons
Material

Minimum
Thickness (in.)

6/6 Nylon
UV Black
Nylon

0.580
0.120
0.240

1.25
1.25
1.25

85
85
85

15.0
35.0
35.0

Heat
Stabilized Nylon

0.580
0.120

1.30
1.30

105
110

11.0
20.0

Temperature Index is the temperature at which the specific property will decrease to
one-half its original value after 60,000 hours exposure at that temperature.

C39

Catamount

®

Fastening Products

Cable Ties
Catamount® Ties and Terminals fit the needs of general-purpose fastening and wire terminations. Installers quickly discover that Catamount® products offer durable and valuepriced cable bundling for a variety of commercial and residential construction applications. Electricians can also take advantage of other benefits in stocking Catamount® products
in their toolboxes, such as more terminals per bag in most popular sizes than leading comparable brands.
Catamount® Ties and Terminals are offered in a wide range of sizes, styles and colours and meet listing requirements for most electrical termination and fastening projects. A
choice of matching tools are also offered to provide quick and reliable installations.

Cat. No.

Max.
Length
Bundle Dia.
(in.)
(in.)

Colour

Std.
Pkg.

Cat. No.

Miniature — Series 18
L-4-18-9-C
L-4-18-0-C
L-6-18-9-C
L-6-18-0-C
L-8-18-9-C
L-8-18-0-C

4.0

5/8

6.4

1-1/2

8.0

2

L-5-30-9-C
Natural
5.6
1-1/4
L-5-30-0-C
Black
L-8-40-9-C
Natural
8.5
2
L-8-40-0-C
Black
L-11-40-9-C
Natural
11.5
3
L-11-40-0-C
Black
L-14-40-9-C
Natural
14.5
4
L-14-40-0-C
Black
Bulk packages available. Contact your Regional Sales Office.
Use QC-100, L-200, L-400-C or ERG-50 Installation Tools.

100

Max.
Length
Bundle Dia.
(in.)
(in.)

Colour

5.5

1

7.5

1-3/4

11.1

3

14.1

4

Natural
Black
Natural
Black
Natural
Black
Natural
Black

Cat. No.

Max.
Length
Bundle Dia.
(in.)
(in.)

Colour

24.00

7.2

34.0

10

36.0

10-3/4

41.0

12

48.0

15

Max.
Length
Bundle Dia.
(in.)
(in.)

L-8-120-9-C
L-8-120-0-C
L-11-120-9-C
L-11-120-0-C
L-14-120-9-C
L-14-120-0-C
L-18-120-9-L
L-18-120-0-L
L-24-120-9-L
L-24-120-0-L
L-28-120-9-L
L-28-120-0-L

100

Std.
Pkg.

Colour

Std.
Pkg.

8.0

2

11.1

3

14.2

4

18.0

4-7/8

24.2

7

28.0

8

Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black

100

50

Use L-300C or ERG-120 Installation Tools.

Extra Heavy-Duty — Series 175
L-24-175-9-L
L-24-175-0-L
L-34-175-9-L
L-36-175-9-L
L-36-175-0-L
L-41-175-9-L
L-41-175-0-L
L-48-175-9-L
L-48-175-0-L

100

Heavy-Duty — Series 120

Bulk packages available. Contact your Regional Sales Office.
Use QC-100, L-200, L-400-C or ERG-50 Installation Tools.

Cat. No.

Std.
Pkg.

Std.
Pkg.

Standard — Series 50
L-5-50-9-C
L-5-50-0-C
L-7-50-9-C
L-7-50-0-C
L-11-50-9-C
L-11-50-0-C
L-14-50-9-C
L-14-50-0-C

Colour

Intermediate — Series 30
Natural
Black
Natural
Black
Natural
Black

Bulk packages available. Contact your Regional Sales Office.
Use QC-100, L-200, L-400-C or ERG-50 Installation Tools.

Cat. No.

Max.
Length
Bundle Dia.
(in.)
(in.)

Natural
Black
Natural
Natural
Black
Natural
Black
Natural
Black

Sample Catalogue Order:
Length

50

Colour

Colour Table
0 – Black (UV Resistant) 5 – Green

11 – Fluorescent Pink

L 4 18 9 C

1 – Brown

6 – Blue

16 – Fluorescent Orange

Tensile Strength

2 – Red

7 – Purple

17 – Fluorescent Yellow

3 – Orange

8 – Grey

18 – Fluorescent Green

4 – Yellow

9 – Natural

20 – Fluorescent Blue

Quantity

4 in. Length, 18 lb. Tensile
Strength, Natural Colour,
100-Pack Quantity

Use L-300C or ERG-120 Installation Tools.

C40

w w w. t n b. c a

Catamount

®

Fastening Products

Cable Ties

Cat. No.

Max.
Length
Bundle Dia.
(in.)
(in.)

Colour

Std.
Pkg.

Natural
Black
Natural
Black
Natural
Black

100

Releasable Ties
L-5-50R-9-C
5.90
1-1/4
L-5-50R-0-C
L-8-50R-9-C
7.80
2
L-8-50R-0-C
L-10-50R-9-C
11.27
3
L-10-50R-0-C
Bulk packages available.
Contact your Regional Sales Office.
Push button release.

Length
(in.)

Cat. No.

Mounting
Hole

Max.
Max. Panel
Bundle Dia.
Thickness
(in.)

Colour

Std.
Pkg.

Push Mount Cable Ties
L-5-50PM-9-C
Natural
5.80
1
L-5-50PM-0-C
Black
0.250
0.105
L-7-50PM-9-C
Natural
8.20
1-3/4
L-7-50PM-0-C
Black
Bulk packages available. Contact your Regional Sales Office. Use QC-100, L-200 or L-400-C
Installation Tools.
Black shown.

Cat. No.

Max.
Length
Bundle Dia.
(in.)
(in.)

Width
(in.)

Min.
Loop
Tensile

100

Mounting
Std.
Colour
Head
Pkg.
Screw Size

Mounting Head Ties
L-5-30MH-9-C
L-5-30MH-0-C
L-7-50MH-9-C
L-7-50MH-0-C
L-11-50MH-9-C
L-11-50MH-0-C
L-14-50MH-9-C
L-14-50MH-0-C
L-14-120MH-9-C
L-14-120MH-0-C

5.85

1-1/4

0.140

7.50

1-3/4

0.185

11.10

3

No. 8
30

No. 10
0.187

50

0.300

120

14.50
4
14.85

1/4 in.

Natural
Black
Natural
Black
Natural
Black
Natural
Black
Natural
Black

100

Bulk packages available. Contact your Regional Sales Office. Use QC-100, L-200, L-400-C, ERG-120 or
ERG-50 Installation Tools.

Cat. No.

Length
(in.)

Mounting
Hole

Max.
Max. Panel
Bundle Dia.
Thickness
(in.)

Colour

Std.
Pkg.

Releasable Push Mount Cable Ties
L-5-50PMR-9-C
Natural
5.80
1
L-5-50PMR-0-C
Black
0.250
0.105
L-7-50PMR-9-C
Natural
8.20
1-3/4
L-7-50PMR-0-C
Black
Bulk packages available. Contact your Regional Sales Office. Use QC-100, L-200 ou L-400-C
Installation Tools.

w w w. t n b. c a

100

C41

Catamount

®

Fastening Products

Cable Ties

Cat. No.

Max.
Length
Bundle Dia.
(in.)
(in.)

Colour

Std.
Pkg.

Natural
Natural

100

Identification Ties
L-7-50ID-9-C
L-4-18ID-9-C

Cat. No.

Slot
Width Height
Height
(in.)
(in.)
(in.)

Slot
Width
(in.)

Colour

Std.
Pkg.

0.200
0.336

Natural
Natural

100

Identification Tags

7.875
4.0

1-3/4
3/4

IDNY-1500-9-M
IDNY-2000-9-M

1.5
2.0

0.745

0.090
0.113

Bulk packages available. Contac your Regional Sales Office.
Use QC-100, L-200, L-400-C or ERG-50 Installation Tools.

• 3⁄4 in. and 1-1/8 in. mounts for use with 18# through 50# tensile cable ties
• Supplied on rubber-based or acrylic closed cell foam adhesive or with no adhesive for
#6 screw mount applications
• Available in 6.6 Natural Nylon and 6.6 Black Nylon
• UL Flammability 94 V-2 (clip)

Cat. No.

Mount Method

Colour

Cable Tie Mounting Bases
3/4 in. Class
MPNY-750-9-C
MPNY-750-0-C
MPNY-750A-9-C
MPNY-750A-0-C
MPNY-750S-9-C
MPNY-750S-0-C
1 in. Class
MPNY-1000-9-C
MPNY-1000-0-C
MPNY-1000A-9-C
MPNY-1000A-0-C
MPNY-1000S-9-C
MPNY-1000S-0-C

Synthetic Rubber Adhesive
Synthetic Rubber Adhesive
Acrylic Adhesive
Acrylic Adhesive
#6 Screw
#6 Screw

Natural
Black
Natural
Black
Natural
Black

Synthetic Rubber Adhesive
Synthetic Rubber Adhesive
Acrylic Adhesive
Acrylic Adhesive
#6 Screw
#6 Screw

Natural Nylon
Black Nylon
Natural Nylon
Black Nylon
Natural Nylon
Black Nylon

For use with 18–50 lb. Cable Ties.
• Mounting Surface should be cleaned with alcohol based (IPA)
cleaner before application
• Acrylic Based may be repositioned initially. Allow 24–72 hours
setup for maximum performance with Acrylic Based adhesives
• For Rubber Based, allow 15 minutes setup for maximum performance

C42

w w w. t n b. c a

Catamount

®

Fastening Products

Cable Ties
Catamount® Military Speciﬁcation Ties
The following cable ties meet the stringent requirements of military specifications. To locate ties that meet a
particular specification, refer to the chart below.

MINIATURE

INTERMEDIATE

STANDARD

HEAVY DUTY

Cat. No.

Use L-300C Tool

Mil-Spec

Material

ID
Code

Tool
Setting

Std.
Pkg.

Bulk
Pkg.

MS-3367-2-9
MS-3367-2-0
MS-3367-3-9
MS-3367-3-0
MS-3367-4-9
MS-3367-4-0
MS-3367-5-9
MS-3367-5-0
MS-3367-7-9
MS-3367-7-0
MS-3367-6-9
MS-3367-6-0

Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon

STD
STD
HVY
STD
MIN
MIN
INT
INT
STD
STD
HVY
HVY

6 to 8
6 to 8
5 to 8
6 to 8
1 to 3
1 to 3
3 to 5
3 to 5
6 to 8
6 to 8
5 to 8
5 to 8

100
100
100
100
100
100
100
100
100
100
50
50

500
500
–
–
–
–
–
–
500
500
–
–

Mil-Spec Cable Ties
L-14-50-9-C
L-14-50-0-C
L-14-120-9-C
L-14-120-0-C
L-4-18-9-C
L-4-18-0-C
L-5-30-9-C
L-5-30-0-C
L-11-50-9-C
L-11-50-0-C
L-28-120-9-L
L-28-120-0-L

L-14-50-9-D
L-14-50-0-D
–
–
–
–
–
–
L-11-50-9-D
L-11-50-0-D
–
–

• Use L-200, L-400-C or ERG-297
Installation Tools
• Catamount® FSCM 54664 QPL Listed

To assure that military labeling
requirements are met when
ordering MIL-SPEC Cable Ties,
please reference the desired MS
number when ordering.

Colour Table
Sample Catalogue Order:

L 4 18 9 C =

w w w. t n b. c a

Natural Colour Type

0 – Black (Outdoor)
1 – Brown
2 – Red
3 – Orange
4 – Yellow

5 – Green
6 – Blue
7 – Purple
8 – Grey
9 – Natural

11 – Fluorescent Pink
16 – Fluorescent Orange
17 – Fluorescent Yellow
18 – Fluorescent Green
20 – Fluorescent Blue

C43

Catamount

®

Fastening Products

Cable Ties
• Striped ties are used to identify wire bundles promarily
for P.I.C. and station cable binder marking
• Telecom applications

Cat. No.

Tie
Colour

Stripe
Colour

Diameter

Length

Width

Loop Tensile

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

lb

kg

Std.
Pkg.

1/16 - 7/8

2 - 16

4.0

102

0.100

3

18

8.2

50

Striped Ties
L-4-18-1/10-L
L-4-18-1/2-L
L-4-18-1/0-L
L-4-18-1/4-L
L-4-18-1/7-L
L-4-18-3/10-L
L-4-18-3/2-L
L-4-18-3/0-L
L-4-18-3/4-L
L-4-18-3/7-L
L-4-18-5/10-L
L-4-18-5/2-L
L-4-18-5/0-L
L-4-18-5/4-L
L-4-18-5/7-L
L-4-18-6/10-L
L-4-18-6/2-L
L-4-18-6/0-L
L-4-18-6/4-L
L-4-18-6/7-L
L-4-18-8/10-L
L-4-18-8/2-L
L-4-18-8/0-L
L-4-18-8/4-L
L-4-18-8/7-L

Brown

Orange

Green

Blue

Grey

White
Red
Black
Yellow
Purple
White
Red
Black
Yellow
Purple
White
Red
Black
Yellow
Purple
White
Red
Black
Yellow
Purple
White
Red
Black
Yellow
Purple

Also available in bulk packages of 1,000.
Use QC-100, L-200, L-400-C, or ERG-299 Installation Tools.
Consult your Regional Sales Office for availability and colours.

C44

w w w. t n b. c a

T&B

®

Fastening Products

Cable Ties
From one end to the other,
T&B® Cable Ties ﬁt the
needs of OEMs

Designed with OEMs in mind, this new series of competitively priced T&B® cable ties holds
down costs and speeds up cable fastening. Our all-nylon design lowers installation costs
and provides features to ease fastening for harness fabrication and wire bundling in the manufacturing
environment.
T&B® cable ties are made of nylon 6/6 and perform well in most applications in temperatures ranging from
185°F to -40°F. The smooth edges are designed to prevent damage to wire insulation, reducing the
opportunity for shorting, and tails are “turned up” for fast assembly. T&B® cable ties come in natural or
outdoor weatherable black, and custom colours and options are available.
T&B® cable ties may be fastened with standard Thomas & Betts tying tools. All your favorite Ty-Rap®
mounting bases and accessories may be used with T&B® cable ties. For harsh industrial environments, use
our “grip of steel®” Ty-Rap® cable ties with the unique stainless steel barb. Ty-Rap® and T&B® cable ties
combine to offer the most complete package of cable ties and accessories for the fastening market.
T&B® cable ties come in large poly bags for convenient inventory and easy access at the manufacturing
site. Call your local Thomas & Betts distributor today and find out how well T&B® cable ties can fit your
needs, from one end to the other.

Cat. No.

Min. Tensile
Strength
(in./lb)

Military
Standard
Part No.

Tie
Length
(in.)

Max. Bundle
Diameter
(in.)

Width
(in.)

Std.
Pkg.
(pieces)

18
18
40
18
40
120
40
50
50
50
120

MS3367-4
–
MS3367-5
–
–
–
–
MS3367-1
MS3367-7
MS3367-2
MS3367-3

3.60
5.34
5.60
7.75
8.00
8.63
11.40
7.30
11.40
14.30
14.30

0.75
1.25
1.25
2.00
2.00
2.00
3.00
1.75
3.00
4.00
4.00

0.095
0.095
0.140
0.095
0.140
0.299
0.140
0.184
0.184
0.184
0.301

1,000
1,000
1,000
1,000
1,000
500
1,000
1,000
1,000
1,000
500

Military
Standard
Part No.

Tie
Length
(in.)

Max. Bundle
Diameter
(in.)

Width
(in.)

Std.
Pkg.
(pieces)

–
–
–
–
–
–
–
–
–
–
–

3.60
5.34
5.60
7.75
8.00
8.63
11.40
7.30
11.40
14.30
14.30

0.75
1.25
1.25
2.00
2.00
2.00
3.00
1.75
3.00
4.00
4.00

0.095
0.095
0.140
0.095
0.140
0.299
0.140
0.184
0.184
0.184
0.301

1,000
1,000
1,000
1,000
1,000
500
1,000
1,000
1,000
1,000
500

T&B® Cable Ties

• The integrally formed nylon pawl combines
low insertion and high locking strength
• A rounded, low-profile head makes for less
snags
• Tails have an improved two-sided finger
grip design that helps the operator grasp
and pull ties snug
• “Sure Grip” tab keeps the tail from popping
out while being threaded, then holds it
securely for final tightening by hand or tool
• Quick, easy pull through increases
productivity, reduces operator fatigue

TY075-18
TY125-18
TY125-40
TY200-18
TY200-40
TY200-120
TY300-40
TY175-50
TY300-50
TY400-50
TY400-120

Add suffix (-20) for cosmetic black, non-weatherable material.

Cat. No.

Min. Tensile
Strength
(in./lb)

Outdoor Weatherable (black)
TY075-18X
TY125-18X
TY125-40X
TY200-18X
TY200-40X
TY200-120X
TY300-40X
TY175-50X
TY300-50X
TY400-50X
TY400-120X

w w w. t n b. c a

18
18
40
18
40
120
40
50
50
50
120

C45

T&B

®

Fastening Products

Cable Ties
• Strapping provides a wide range of tensile strengths
depending on mounting method
(S2NY-096-0 tested at 50 lb. with BTNY-096)
• Non-Conductive, Non Corrosive; resistant to fuels,
lubricants and most chemicals

• Extruded in 5 widths with 8 mounting hole diameters
for use with a variety of standard and custom
fasteners
• Extrusion grade Black Nylon
• Hole spacing allows for greater flexibility in meeting
bundle diameter requirements

Width - W
Cat. No.

Thickness - T

Hole - H

Spacing - E

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

0.281

7.13

0.32

0.813

0.375

9.52

0.40

1.02

0.500

12.70

0.60

1.52

0.096
0.128
0.140
0.167
0.167
N/A
0.167
0.203
0.203
0.265
0.265
0.281
N/A
0.203
0.265
0.390

2.44
3.25
3.56
4.24
4.24
N/A
4.24
5.16
5.16
6.73
6.73
7.14
N/A
5.16
6.73
9.90

0.187
0.312
0.312
0.312
0.218
N/A
0.390
0.390
0.281
0.500
0.375
0.500
N/A
0.500
0.500
0.625

4.75
7.92
7.92
7.92
5.54
N/A
9.90
9.90
7.14
12.70
9.52
12.70
N/A
12.70
12.70
15.87

Quantity

Strapping
S2NY-096-0-C
S4NY-128-0-C
S4NY-140-0-C
S4NY-167-0-C
S4NY-167X-0-C
S6NY-000-0-C
S6NY-167-0-C
S6NY-203-0-C
S6NY-203X-0-C
S7NY-265-0-C
S7NY-265X-0-C
S7NY-281-0-C
S9NY-000-0-C
S9NY-203-0-C
S9NY-265-0-C
S9NY-390-0-C

Cat. No.

0.625

15.87
0.70

0.875

1.78

22.22

Strap-Tite
Buckle

Mounting
Tab

Mounting
Cradle

100 foot rolls

Stud
Buttons

Machine
Screw

BTNY-096-0-D

#2
#5
#6
#8
#8
N/A
#8
#10
#10
1/4
1/4
1/4
#10
1/4
3/8

Strapping Accessories Reference
S2NY-096-0-C
S4NY-128-0-C
S4NY-140-0-C
S4NY-167-0-C
S4NY-167X-0-C
S6NY-000-0-C
S6NY-167-0-C
S6NY-203-0-C
S6NY-203X-0-C
S7NY-265-0-C
S7NY-265X-0-C
S7NY-281-0-C
S9NY-203-0-C
S9NY-265-0-C
S9NY-390-0-C

C46

N/A
M4NY-203-0-D

C4NY-203-0-D

B4NY-167-0-D

BTNY-167-0-D

N/A

N/A
M6NY-265-0-D

B6NY-203-0-D
B7NY-265-0-D

N/A

BTNY-203-0-D
M7NY-328-0-D

N/A

N/A

BTNY-265-0-D
N/A
BTNY-203-0-D
BTNY-265-0-D
N/A

w w w. t n b. c a

T&B

®

Fastening Products

Cable Ties
Double Loop Cable Ties
One Tie, Two Loops
Double Loop Cable Ties allow the parallel routing of two bundles of cable
with one single cable tie. The unique design loops itself twice through the head of the tie
in separate latching pawls. Applications include appliance manufacturers, automotive,
aerospace, data communications, and electrical equipment manufacturers.

Advantages
•
•
•
•
•

Manufactured of natural colour nylon 6/6 material
Temperature range of -40°F to 185°F
UL 94 V-2 flammability rating
Halogen and silicone-free to meet your application needs
The integrally formed pawl combines low insertion and high
locking strength
• A rounded, low profile head makes for less snags
• Tails have improved two sided finger grip design that helps the
operator grasp and pull ties snug
• Quick and easy pull through increases productivity, reduces
operator fatigue

Length
Cat. No.

(in.)

Width

Bundle Diameter Range

(mm)

(in.)

(mm)

Loop 1 (in./mm)

Loop 2 (in./mm)

198.12
299.72
370.84

0.19

4.83

0.1 - 1.8 / 2.54 - 45.72
0.1 - 2.8 / 2.54 - 71.12
0.1 - 3.9 / 2.54 - 99.06

0.1 - 1.7 / 2.54 - 43.18
0.1 - 2.7 / 2.54 - 68.58
0.1 - 3.8 / 2.54 - 96.52

Tensile
Strength
(lb./N.)

Installation
Tooling for
all sizes

Std.
Pkg.

50/222.4

ERG50

1,000

Double Loop Cable Ties
TB-50RLDH
TB-12-50RLDH
TB-15-50RLDH

w w w. t n b. c a

7.8
11.8
14.6

C47

T&B

®

Fastening Products

Cable Ties
Low-Proﬁle Cable Ties
This fastener design from Thomas & Betts is ideal for use where precision bundling is required
and clearance is a necessity. A unique saddle back design curves to form a snug fit around the
bundle, and allows for easy pull-through in bulkheads and any other tight spaces. Our
contoured head eliminates snagging and sharp edges are reduced by our safe-guard walls.

Features
• Low-profile, contoured head reduces clearance required for the bundle and enhances the
appearance of your harness
• The safe-guard wall eliminates exposure to sharp edges
• The saddle back fits snug against the contour of the wiring harness
• Sizes and colours available to accommodate varying requirements
• High-quality nylon strength

Low profile contoured head compared with the profile of the
traditional T&B® Cable Tie.
Bundle Range Dia.
Cat. No.

(in.)

Tie Length

(mm)

(in.)

3.17 - 25.4
3.17 - 38.1
3.17 - 50.8
4.74 - 44.4
4.74 - 76.2
4.74 - 101.6
9.52 - 101.6
9.52 - 152.4

4.65
6.45
8.10
7.70
11.33
14.53
14.58
21.00

(mm)

Strap Width

Strap Thick

(in.)

(in.)

(mm)

(mm)

Tensile Strength
lb.

kg

18

8.16

50

22.68

120

54.43

Std.
Pkg.

Bulk
Pkg.

100

1,000

Cable Ties Ordering Information
SF100-18
SF150-18
SF200-18
SF175-50
SF300-50
SF400-50
SF400-120
SF600-120
ERG120
ERG50

0.125 - 1.00
0.125 - 1.50
0.125 - 2.00
0.187 - 1.75
0.187 - 3.00
0.187 - 4.00
0.375 - 4.00
0.375 - 6.00

118.11
163.83
0.95
2.41
0.043
1.09
205.74
195.58
0.48
1.21
287.78
0.187
4.74
0.52
1.32
369.06
370.33
0.300
7.62
0.75
1.90
533.40
Application tool for 50 lb. to 120 lb. tensile strength
Application tool for 18 lb. to 50 lb. tensile strength

Material: Natural Nylon 6/6 in accordance with ASTM D4066 PA111. Also available in black outdoor
weatherable (suffix “-X”).
Dimensions: Designed according to military standards (MS3367) except for the head length, which is
slightly larger than MIL spec.
Packaging: Standard package is 100 pieces.

Colour

Suffix No.

How to Order Colour Cable Ties
Black (outdoor)
Brown
Red
Orange
Yellow
Green
Blue
Purple
Grey
White

X
1
2
3
4
5
6
7
8
9

Packaged for handling convenience.
Natural nylon is standard. For coloured cable ties in-line
fasteners add the following suffix numbers to catalogue
numbers.
Example: SF175-50-2 (Red)
For Distributor Packs (100), add suffix “-100”.
Example: SF175-50-100
(Consult your Regional Sales Office for ordering information)

C48

w w w. t n b. c a

T&B

®

Fastening Products

Cable Ties
Ski-Badge Holder Cable Ties

T&B® Badge Holder
The ticket fastener that won't leave you out in the cold.
Thomas & Betts offers ski resorts a convenient, low-cost, quick, and
safe alternative to the metal wire clip currently used to attach ski lift
tickets to skiers' clothing.
T&B® cable ties offer these prominent advantages:
• Designed specifically for lift ticket attachment to prevent damage to
skiers’ clothing
• Incorporates a loop diameter restriction device that forms the proper
sized 1-1/4 inch loop required to hold the lift ticket in place and lay
flat on the skier
• Prevents the tie from being over-tightened and damaging the lift ticket
• May also serve to aid the skier in zipping their coat by extending the
zipper length
• The Badge Holder is tamper resistant and smooth up to the restriction point
to keep it from being shared or reused by other skiers
• The smooth body eliminates the notch sensitivity issue inherent to
all-nylon cable ties
• The Badge Holder is designed with a flexible short round tail, safely
eliminating sharp metal
• Affordable at just pennies per fastener!
The Badge Holder comes in 9 different colours to match the resort's colour
schemes and is made of high quality Nylon 6/6 material to withstand cold
temperatures. It is 5 inches long and has a sturdy 30 lb. tensile strength
rating. Badge Holders may also be heat stamped with additional identification,
such as the resort’s name or web site.
When the snow starts, Badge Holders will be ready to keep things snug, all
the way down the mountain!

Cat. No.

Description

Qty.

UPC

1,000 bag

78621017017

®

T&B Badge Holder Ordering Information
SJ-5-30SKI-9-M

Ticket Fastener

Natural nylon colour. Please consult your Regional Sales Office for ordering
and availability of colours and heat-stamping.
Dimensions: 5 in.
Construction: Nylon 6/6
Max. Tensile Strength: 30 lb.

5 in.

w w w. t n b. c a

C49

Ty-Rap

®

Fastening Products

Cable Tie Mounting Bases
Choose from adhesive-backed, epoxy or screw mounting bases!

Temperature Rating:
32ºF to 150ºF (0ºC to 66ºC)
*Synthetic Rubber Adhesive

• Available in a variety of materials for both indoor and outdoor use
• One-piece molding — no lost parts
• Adhesive-backed with pressure-sensitive adhesive tape (where applicable)
Std. Pkg.
Cat. No.

Bulk Pkg.
Cat. No.

Mounting
Method

Max. Tie
Width
Accom.

Length
(in.)

(mm)

Width
(in.)

(mm)

Material

Std.
Pkg.

Bulk
Pkg.

Two-Way Adhesive Mounting Bases
TC5342A
–
–
–
–

TC342A
TC342A-X
TC342
TC342X
TC342A-FR

–

TC342AH-TFR

SRA* Adhesive

Nylon 6.6
Weatherable Nylon
Nylon 6.6
Weatherable Nylon
Flame-Retardant Nylon

Acrylic
Adhesive

Black High-Temp
Flame-Retardant Nylon

SRA* Adhesive
TC2PA

0.19

1.13

28.58

1.13

28.58

100

–

1,000

Select the Four-way
configuration you need!
• Eliminates errors in premounting
the base with respect to its
orientation to wire bundle
direction
• Convenient way to mount wire
bundles at cross-over points —
two optional mounting holes
included

Std. Pkg.
Cat. No.

Temperature Rating:
32ºF to 150ºF (0ºC to 66ºC)
*Synthetic Rubber Adhesive

Bulk Pkg.
Cat. No.

Mounting
Method

Max. Tie
Width
Accom.

Length
(in.)

Width

(mm) (in.)

(mm)

Material

Std.
Pkg.

Nylon 6.6

100

Bulk
Pkg.

4-Way Adhesive Mounting Base
TC5345A

TC345A

–

TC345AFR

TC5345AX

TC345AX

TC5345AHTFR

TC345AHTFR

–

TC345

SRA* Adhesive
0.19

1.13

28.58

1.13

28.58

Acrylic
Adhesive
TC2PA/Screws

Flame-Retardant Nylon

–

Weatherable Nylon

100

Black High-Temp
Flame-Retardant Nylon
Nylon 6.6

1,000

100
–

4-Way Mini Base
TC050X050A-C

TC050X050A

TC050X050AX-C

TC050X050AX

TC5344A

TC344A

TC5344AX

TC344AX

TC5344

TC344

0.10

0.5

12.70

0.5

12.70

0.14

0.75

19.05

0.75

19.05

SRA* Adhesive

Nylon 6.6
Weatherable Nylon
Nylon 6.6

Screw Mount

100

1,000

Weatherable Nylon
Nylon 6.6

Large 4-Way Base
TC150X150L

TC150X150

TC150X150A-L

TC150150A

TC150X150AX-L

TC150X150AX

TC200X200-L

TC200X200

TC200X200A-L

TC200X200A

–

TC200X200AX

–

TC368

Screw Mount

–

TC368A

SRA* Adhesive

Screw Mount
SRA* Adhesive

0.19

1.5

38.10

1.5

38.10

Weatherable Nylon

Screw Mount
SRA* Adhesive

Nylon 6.6
50

Nylon 6.6

0.30
2.0

50.80

2.0

50.80

0.75

500

Weatherable Nylon
Nylon 6.6

–

Great versatility!
• Accommodates the entire line of standard cable ties
• 4-way base for cable ties up to .184" maximum width and a two-way base for ties up to .301" maximum width
• It may also be mounted with #8 size screw (2 holes)
Temperature Rating:
32ºF to 150ºF (0ºC to 66ºC)
*Synthetic Rubber Adhesive

C50

Std. Pkg.
Cat. No.

Bulk Pkg.
Cat. No.

Mounting
Method

Max. Tie
Width
Accom.

Length
(in.)

(mm)

Width
(in.)

(mm)

Material

Std.
Pkg.

Bulk
Pkg.

100

1,000
–

–

1,000

Two- and Four-Way Adhesive Mounting Base
TC5347A
TC5347AX
–
–
–

TC347A
–
TC347
TC347FR
TC347X

–

TCZ347

SRA* Adhesive

0.30
TC2PA Screws

1.13

28.58

1.13

28.58

Nylon 6.6
Weatherable Nylon
Nylon 6.6
Flame-Retardant
Weatherable Nylon
Radiation Resistant
Fluoropolymer

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Cable Tie Mounting Bases
Great for securing cables!
•
•
•
•

Provides a fast and convenient method of securing bundles
Single-piece design offers reduced installation time and maximized inventory control
Integral top cover incorporates a unique ratchet design that is fully adjustable and releasable
Available in a pressure-sensitive adhesive or screw mount design

Std. Pkg.
Cat. No.
Natural nylon colour.
Temperature Rating:
32ºF to 150ºF (0ºC to 66ºC).
*Synthetic Rubber Adhesive.

Bulk Pkg.
Cat. No.

Base
Style

Clamping Area

Maximum
Height
(in.)

Min.
(in.)

Min.
(mm)

Max.
(in.)

Max.
(mm)

0.57

0.18 x 0.24

4.57 x 6.10

0.35 x 0.24

0.89 x 6.10

0.89

0.20 x 0.59

5.08 x 14.99 0.45 x 0.59 11.43 x 14.99

Std.
Pkg.

Bulk
Pkg.

100

1,000

Std.
Pkg.

Bulk
Pkg.

One-Piece Mounting Clamp
TC5349A-TB TC349A-TB
TC5350A-TB TC350A-TB
TC5350-TB

TC350-TB

SRA* Adhesive
Screw Mount (#8)
Hole for no. 6 screw

Simple to install!
Natural nylon colour.
Temperature Rating: 32ºF to 150ºF (0ºC to 66ºC).
*Synthetic Rubber Adhesive.

Std. Pkg.
Cat. No.

Bulk Pkg.
Cat. No.

Mounting
Method

Length

Width

Max. Tie
Width
Accom.

(in.)

(mm)

(in.)

(mm)

0.19

2.00

50.80

1.00

25.40

Material

Snap-In Mounting Base for Preassembled Ties
TC5353A

TC353A

SRA* Adhesive

–

TC353

TC2PA/Screws

Nylon 6/6

25
–

500

Great for securing cables!
Temperature Rating: 32ºF to 150ºF (0ºC to 66ºC).
*650-41349 has two holes for mounting.

Cat. No.

Mounting
Method

Max. Tie
Width
Accom.

Max. Tie Length

Width

(in.)

(mm)

(in.)

(mm)

1.00

25.40

0.50

12.70

1.38

34.93

0.38

9.65

Material

Pkg.

Aluminum

1,000

Aluminum Mounting Plates
TC105
TC824-TB
650-41349*

TC2PA/Screws
TC2PA

0.19

TC2PA/Screws

Super strong adhesive!

Cat. No.

Mounting Method

Pkg.

Consists of one tube each, adhesive and activator

1

Mounting Base Adhesive
TC2PA

w w w. t n b. c a

C51

Ty-Rap

®

Fastening Products

Cable Tie Mounting Bases
Accepts cable ties up to 50-lb. (222N) tensile strength
(miniature through standard)!
• Supplied on closed cell foam with synthetic rubber-based adhesive
• Use #6 self-tapping screw for added strength if desired

Std. Pkg.
Cat. No.

Bulk Pkg.
Cat. No.

Height

Mounting
Method

Material

Length

Width

Slot Height

Slot Width

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

0.285

7.24

1.250

31.75

1.000

25.4

0.090

2.29

0.300

7.62

Std. Bulk
Pkg. Pkg.

Adhesive Mounting Cradle
MCNY-1250-9-C

MCNY-1250-9-D

Natural Nylon 6.6

SRA* Adhesive

100

50

*Synthetic Rubber Adhesive

Fluoropolymer available for harsh environments!
• SMNY-001 accepts cable ties to 50 lbs. (222N) tensile (miniature through standard)
• SMNY-002 accepts cable ties to 120 lbs. (533N) tensile (miniature through heavy-duty)
• Use #4, #6, #8, or #10 machine screw (as referenced)

Std. Pkg.
Cat. No.

Material

Height

Length

Width

Slot Height

Slot Width

Mounting
Method

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

Std.
Pkg.

Screw Mount
SMNY-000-9-D

Natural Nylon 6.6

#4 Screw

0.27

6.86

0.57

14.48

0.34

8.64

0.07

1.78

0.12

3.10

SMTZ-001-9-D

Radiation-Resistant
Fluoropolymer (green)

#6, #8 Screw

0.28

7.11

0.60

15.24

0.39

9.77

0.06

1.52

0.20

5.08

#8, #10 Screw

0.39

9.90

0.88

22.22

0.63

15.87

0.09

2.29

0.33

8.26

#6,#8 Screw

0.28

7.11

0.60

15.24

0.39

9.77

0.06

1.52

0.20

5.08

#8, #10 Screw

0.39

9.90

0.88

22.22

0.63

15.87

0.09

2.29

0.33

8.26

SMNY-002-9-D

Natural Nylon 6.6

SMTZ-002-9-D

Radiation-Resistant
Fluoropolymer (green)

SMNY-001-0-D
SMNY-002-0-D

Heat-Stabilized
Black Nylon

500

SMNY series for use in temperatures ranging from -40ºF to 221ºF (-40ºC to 105ºC).
SMTZ series for use in temperatures ranging from -50ºF to 302ºF (-45ºC to 150ºC).

This mounting base provides a saddle for the wire run.
Ty-Rap® tie is threaded under bundle and tied in usual manner.
NOTE: For additional materials, refer to Regional Sales Office.

Std. Pkg.
Cat. No.

Bulk Pkg.
Cat. No.

Mounting
Method

Maximum
Tie Width
Accom.
(in.)

(in.)

Width

Length
(mm)

(in.)

(mm)

Std.
Pkg.

Bulk
Pkg.

Saddle Support Base
–

TC140

#4 Pan Head

0.091

0.344

8.74

0.563

14.30

TC5141

TC141*

#6 Pan Head

0.190

0.439

11.15

0.672

17.07

TC5142

TC142

#10 Pan Head

0.301

0.563

14.30

0.922

23.42

–
100

500

* Add suffix FR for flame-retardant material (TC141 only).
Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

C52

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Cable Tie Mounting Bases
These nylon mounting strips for parallel installation of wire bundles can accommodate up to six closely spaced bundles.

Cat. No.

Maximum
Tie Width
Accom.
(in.)

Mounting
Method

Width
(in.)

Length

(mm)

(in.)

(mm)

Capacity
(Bundles)

Mil. Std.
Part No.

1.75

44.45

1

MS3339-1

3.00

76.20

2

MS3339-2

4.25
5.50
6.75
9.60
2.10
3.60
5.10
6.60
8.10

107.95
139.70
171.45
243.84
53.34
91.44
129.54
167.64
205.74

3
4
5
6
1
2
3
4
5

MS3339-3
MS3339-4
MS3339-5
MS3339-11
MS3339-6
MS3339-7
MS3339-8
MS3339-9
MS3339-10

Std.
Pkg.

Multiple-Bundle Mounting Strips
TC1101
TC1102
TC1103
TC1104
TC1105
TC1112
TC1113
TC1114
TC1115
TC1116
TC1117

0.190

0.50

12.70

#6 Screws

0.301

0.63

15.88

100

Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Provides a mounting range for bundles from 1/4 in. through 4 in. in diameter!

Std. Pkg. Bulk Pkg. Mounting
Cat. No. Cat. No.
Method

Maximum
Tie Width Accom.

Length

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

Std. Bulk
Pkg. Pkg.

Single-Bundle Mounting Base
–

TC101

#10 Screws

0.190

4.83

0.500

12.7

2.00

50.80

–

1,000

TC503

TC103

1/4 in. Screws

0.301

7.65

0.625

15.88

3.08

78.23

100

500

The TC101 and TC103 nylon bases provide a mounting range for bundles from 1⁄4 in. through 4 in. in diameter.
One mounting hole is slotted to permit adjustment of the bundle position up to the time of actual bundle installation.
Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Permits vertical stacking!

Cat. No.

Mounting
Hole Size

Tie Width Accom.

Length

Max. Width

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

0.190

4.83

1.00

25.40

0.47

11.91

Std.
Pkg.

Ty-Rap® Mounting Blocks
TC115-TB

#10

1,000

Mounting blocks permit vertical stacking and can be used in any direction.
Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

w w w. t n b. c a

C53

Ty-Rap

®

Fastening Products

Cable Tie Mounting Bases
Meets military specs as a support in bulkheads and walls!
Tie Width Accom.

Length

Max. Width

Std.
Pkg.

Cat. No.
(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

Right-Angle Bundle Support
TC109

0.190

4.83

0.44

11.13

0.56

14.30

200

TC106

0.30

7.62

1.00

25.40

1.00

25.40

1,000

This style meets Military Specification requirements as a support at holes in bulkheads and walls. (MS3341)
Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Mount bundles on either side!
Max.Tie Width
Accom.

Cat. No.

(in.)

(mm)

Length

Width

(in.)

(mm)

(in.)

(mm)

0.75

19.05

3.65

92.71

0.67

17.01

1.75

44.45

Std.
Pkg.

Ty-Rap® Stand-Off Brackets
TC375
TC375X (Weatherable)

0.190

4.83

TC376

100

These brackets permit bundles to be mounted on either side. They also serve as means to raise bundles off the surface.
Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).
Weatherable nylon is black.

Weather-resistant and transparent!
Cat. No.

Wire Accommodation

Std. Pkg.

1/8 in. Diameter Wire (2-pair station wire)

100

Aluminum Siding Clip
TC201

•
•
•
•
•

Transparent — Colour and texture of siding shows through
Material — Weather-resistant grade polycarbonate
Designed to accommodate PITTSBURG INTERLOCK metal siding
Accommodates wires both vertically and/or horizontally
Provision for utilizing Ty-Rap® cable ties to secure large diameter bundles

Installs in-line with the wire bundle!

Cat. No.

Mounting
Method

Width Accom.

Max. Tie Width

Length

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

0.30

7.62

0.75

19.05

1.13

28.58

Std.
Pkg.

In-Line Mounting Base
TC815-TB

#10 Screws

1,000

A standard 2-hole base that installs in-line with the wire bundle that conceals it.
Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

C54

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Cable Tie Mounting Bases
Ideal for high-density packaging!
• Simply slip Ty-Rap® cable tie under slot in fastened mount, and attach bundle
Maximum
Tie Width
Accom.
(in.)
Low-Profile Two-Way Miniature Mounting Bases
TC502
TC102
#8 screw
0.19
–
TC104
#5 screw
0.09
TC804-TB
#2 screw
0.09
–
–
TC112-TB
#8 screw
0.19
–
TC812-TB
#10 screw
0.19
–
TC814-TB
#5 screw
0.19

Std. Pkg.
Cat. No.

Bulk Pkg.
Cat. No.

Mounting
Method

Width

Length

(in.)

(mm)

(in.)

(mm)

0.50

12.70

0.75

19.05

0.32

8.03

0.41

10.31

0.38

9.53

0.75

19.05

Std.
Pkg.

Bulk
Pkg.

100
–
–
–
–
–

1,000

Threaded insert permits screw to come from outside of mounting surface.
Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Cat. No.

Mounting
Method

Material

Width

Length

Max. Tie
Width
Accom.

(in.)

(mm)

(in.)

(mm)

0.19

0.44

11.10

0.44

11.10

Std.
Pkg.

Miniature Base
TC817-TB

TC2PA

Nylon 6/6

1,000

Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Handles ties installed in either direction

Std. Pkg.
Cat. No.

Bulk Pkg
Cat. No.

Mounting
Method

Maximum
Tie Width
Accom.
(in.)

Width

Length

Std.
Pkg.

(in.)

(mm)

(in.)

(mm)

0.50

12.70

1.00

25.40

–

0.39

9.91

0.88

22.23

100

Bulk
Pkg.

Low-Profile Four-Way Mounting Base
–

TC826-TB

#8 screw

TC5828

TC828-TB

#8 screw

0.19

1,000

The TC826-TB mounting base can be used to tie bundles running parallel or perpendicular to length of base. The TC828-TB mounting plate also handles ties
installed in either direction and is somewhat smaller than TC826. Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

w w w. t n b. c a

C55

Ty-Rap

®

Fastening Products

Cable Tie Mounting Bases
Four-way screw mounts for cable ties up to
50-lb. (222 N) tensile strength!
H

• Mount with #6 or #8 screws
• Available in 6.6 natural nylon

L

W

Slot W

Cat. No.
(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

0.23

5.84

0.95

25.13

0.50

12.70

0.22

5.59

Mount
SCR

Std.
Pkg.

#6, #8

500

Four-Way Mount
SMNY-220-9-D

Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Firmly locks into position when projecting pin is pushed into the mounting hole

Cat. No.

Mounting
Hole Size

Maximum
Tie Width
Accom.
(in.)

Width

Length

Std.
Pkg.

Material
(in.)

(mm)

(in.)

(mm)

Self-Riveting Base
TC116-TB
TC116-0

Nylon 6.6 (Red)

0.146

TC118-TB

0.169

TC120

0.196

0.190

0.5

12.7

0.75

19.05

Nylon 6.6 (Black)
Nylon 6.6 (Blue)

1,000

Nylon 6.6 (Yellow)

Slip tie under base to attach bundle.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Snap-in, premountable base for securing wire bundles in cabinets maintains the attractive
external appearance of the equipment housing — TC121 Snap-Cap

Cat. No.

Mounting
Hole Size

Maximum
Tie Width
Accom.
(in.)

(in.)

(mm)

(in.)

(mm)

0.190

0.445

11.30

0.415

10.54

Width

Length

Std.
Pkg.

Material

Snap-In Mounting Base Cap
TC121-TB
TCH121†

Nylon 6.6
0.250

TCH121-0†
1/8" max

C56

1,000

Nylon 6.6 Heat Stabilized
Nylon 6.6 (Black) Heat Stabilized

† Not
Recognized.
Natural nylon colour.
Nylon 6.6 for use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).
Heat stabilized for use in temperatures ranging from -40ºF to 221ºF (-40ºC to 105ºC).

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Cable Tie Mounting Bases
STRONG — up to 50-lb. tensile strength!
PMNY-185:
• Versatile push mount for cable ties to 50-lb. tensile strength
• For use in 0.187 in./0.192 in. mounting hole for panel thickness 0.030 in. to 0.080 in.

PMNY-245:
• Accepts cable ties to 50-lb. tensile (miniature through standard)
• For use in 0.250 in. mounting hole for maximum panel thickness of 0.062 in.

Natural nylon colour.
For use in temperatures ranging from
-40ºF to 185ºF (-40ºC to 85ºC).

Cat. No.

Material

Height H

Length L

Width W

Slot Height

Slot Width

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

Std.
Pkg.

0.64

16.26

0.43

10.92

0.43

10.92

0.07

1.65

0.07

1.65

500

0.36

9.02

0.32

8.13

0.32

8.13

0.05

1.27

0.22

5.59

Push Mounts
PMNY-185-9-D
PMNY-254-9-C

Nylon

PMNY-245-9-D

Std. Pkg.
Cat. No.

Bulk Pkg
Cat. No.

Mounting
Hole Size

Maximum
Tie Width
Accom.
(in.)

(in.)

(mm)

(in.)

(mm)

0.19

0.44

11.13

0.63

15.88

Width

Length

Std.
Pkg.

10
500

Bulk
Pkg.

Push-In and Bolted Bases

TC5823

TC5823

TC823-TB

–

TC107†

1/4 in.
#10-32 thd

100
–

1,000

1/8 in. max. †

Not Recognized.
Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

TC107

A

Cat. No.

Material

B

C

D

Std.
(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm) Pkg.

Push-In and Bolted Bases
MSNY-166-0-M
MSNY-187-0-M

UV Black Nylon

0.49 12.45 0.31 7.87

0.28

7.11

0.18

4.57

0.625 15.87 0.343 8.73 0.281 7.14 0.210 5.33

1,000

• For panel thicknesses from 0.060 in. to 0.150 in. to hold separate pieces of material together
• For MSNY-166-0-M used with W4 or N4 Series Cable Clamps, allowable panel thickness is 0.030 in.
to 0.050 in.
• For MSNY-187-0-M used with W6 or N6 Series Cable Clamps, allowable panel thickness is 0.030 in.
to 0.050 in.

w w w. t n b. c a

C57

Ty-Rap

®

Fastening Products

Cable Clamps and Clips
Versatile adhesive clips
keep cable paths
organized

• Diverse cable clamps for bundle diameters from 0.160 in. to 0.620 in.
• Mounted on a rubber-based closed cell foam adhesive
• Flexible center tang for removal or addition of cables

Height H
Cat. No.

Length L

Maximum
Bundle

Width W

Material
(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

0.250

6.35

0.630

16.0

0.580

14.73

0.160

4.06

0.410

10.41

15.75

0.620

1.000

25.40

1.000

25.40

14.22

0.560

1.250

31.75

1.120

28.45

Mounting
Method

Std.
Pkg.

Rubber-based
adhesive

500

Round Adhesive Clips
RANY-160-9-D
RANY-280-9-D
RANY-530-9-D

Nylon

RANY-620-9-D

0.280

7.11

0.530

13.46

0.620

15.75

Natural nylon colour.
Adhesive for use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

Release and refasten with ease — in three adjustable sizes!
•
•
•
•

Three sizes for bundles from 0.118 in. to 0.984 in.
Ladder-style fastener is easily released and refastened
Supplied on a rubber-based closed cell foam adhesive
Optional screw hole for #4 or #5 flat head screw

Height A
Cat. No.

Length B

Width S

Material

Maximum
Bundle

Applied
Wire Range
(in.)

(mm)

Screw Hole
Diameter Std.
Pkg.
(in.) (mm)

(in.) (mm) (in.) (mm) (in.) (mm) (in.)

(mm)

0.709 18.00 0.984 24.99 0.314

2.340

59.44 0.118 - 0.500

3.0 - 12.7

0.110

2.79

0.827 21.00 1.180 29.97 0.472 11.99 3.120

79.25 0.197 - 0.827

5.0 - 21.0

0.984 24.99 1.380 35.05 0.551 14.00 3.370

79.25 0.275 - 0.984

7.0 - 25.0 0.135

3.43

Adjustable Cable Clamps
ULNY-013-8-C

Grey Nylon

ULNY-013-9-C Natural Nylon
ULNY-018-8-C
ULNY-023-8-C

Grey Nylon

7.98

100

Adhesive for use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

Choose from four sizes to accommodate bundles up to 1/2 in.
• Clips are provided on a rubber-based closed cell foam adhesive
• Stocked in 6.6 natural nylon colour. Contact your T&B Sales Representative for
availability in special materials

Std. Pkg.
Cat. No.

Bulk Pkg.
Cat. No.

Material

D
Diameter

A

B

H

W

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

0.13

3.30

0.76

19.30

0.38

9.65

0.21

5.33

0.38

9.65

0.25

6.35

1.38

35.05

0.69

17.53

0.32

8.13

0.50

12.70

0.38

9.65

1.47

37.34

0.74

18.80

0.44

11.176

0.63

16.00

0.50

12.70

1.59

40.39

0.80

20.32

0.59

15.00

0.75

19.05

Std.
Pkg.

Bulk
Pkg.

100

500

Press Clips
PCNY-125-9-C

PCNY-125-9-D

PCNY-250-9-C

PCNY-250-9-D

PCNY-375-9-C

PCNY-375-9-D

PCNY-500-9-C

PCNY-500-9-D

Nylon

For use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

C58

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Cable Clamps and Clips
Eliminate the dangers of loose cables with these clips
• 4 sizes to accommodate bundles up to 1/2 in.
• Clips are provided on a rubber-based closed cell foam adhesive
• Stocked in 6.6 natural nylon colour. Contact your T&B Sales Representative for availability
in special materials

Std. Pkg.
Cat. No.

Bulk Pkg.
Cat. No.

Material

D
Diameter

A

B

(in.)

(mm)

(in.)

(mm)

(in.)

H

W

(mm)

(in.)

(mm)

(in.)

(mm)

Std.
Pkg.

Bulk
Pkg.

100

1,000

Half Press Clips
HCNY-125-9-C

HCNY-125-9-M

0.13

3.30

0.49

12.45

0.38

9.65

0.18

4.57

0.38

9.65

HCNY-250-9-C

HCNY-250-9-M

0.25

6.35

0.87

22.10

0.69

17.53

0.33

8.38

0.50

12.70

HCNY-375-9-C

HCNY-375-9-M

0.38

9.65

0.98

25.90

0.75

19.05

0.42

10.67

0.63

16.00

HCNY-500-9-C

HCNY-500-9-M

0.50

12.70

1.11

28.20

0.82

20.83

0.56

14.22

0.75

19.05

Nylon

For use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

Flat design provides an attractive, yet discreet look
• Flat ribbon cable clamp with mounting hole for #8 screw
• Stocked in 6.6 natural nylon colour
• Flexible center tang enables easy removal and replacement of desired cable
Height H
Cat. No.

Length L

Width W

Material
(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

0.25

6.35

1.19

30.23

1.00

25.40

Mounting
Method

Std.
Pkg.

#8 Screw

100

Flat Cable Screw Clip
FSNY-812-9-C

Nylon

For use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).
GC

GL

H

H

W

W

W

W

GU

H

W
W

Cat. No.

Max. Bundle
Width Accepted

H

L

W

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

0.75

19.05

0.75

19.05

1.00

25.40

1.00

25.40

0.75

19.05

0.75

19.05

Mounting
Method

Std.
Pkg.

Adhesive

25

Adhesive Cable Clips
RANY-160-9-D

0.25

0.39

9.91

RANY-280-9-D

0.50

0.63

16.00

RANY-530-9-D

0.25

RANY-620-9-D

0.76

19.30

RANY-620-9-D

0.50
0.25

0.47

11.94

RANY-620-9-D

0.50

Natural nylon colour.
For use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

w w w. t n b. c a

C59

Ty-Rap

®

Fastening Products

Cable Clamps and Clips
Low-profile clip for single or multiple layers of flat ribbon cable
• Supplied on a rubber-based closed cell foam adhesive
• Flexible center tongue for removal or addition of cables
• Stocked in 6.6 natural nylon colour

Std. Pkg.
Cat. No.

Height H

Bulk Pkg.
Cat. No.

Length L

Width W

Material

Mounting
Method

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

0.28

7.11

1.00

25.40

1.00

25.40

Adhesive

Std.
Pkg.

Bulk
Pkg.

100

500

Flat Adhesive Clips
FANY-812-9-C

FANY-812-9-D

Nylon

Natural nylon colour.
For use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

Adhesive eliminates need for tools when mounting clips
•
•
•
•

Std. Pkg.
Cat. No.

Height H

Bulk Pkg.
Cat. No.

Low-profile clip for single or multiple layers of flat ribbon cable
“Single-Cut” on a rubber-based closed cell foam adhesive
Grey PVC
UL Flammability 94 V-0 (clip)

Length L

Width W

Material

Mounting
Method

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

0.42

10.67

1.06

26.92

1.00

25.40

Adhesive

Std.
Pkg.

Bulk
Pkg.

100

500

Flat PVC Clips
FRPV-1000-8-C

FRPV-1000-8-D

Grey PVC

For use in temperatures ranging from 32ºF to 150ºF (0ºC to 66ºC).

Ideal for assembly applications
•
•
•
•

16 sizes for bundle diameters to 2.38 in.
Removable and reusable. Twist by hand or with pliers to remove
Stocked in weatherable Nylon. 100 pieces per package
Request samples for testing to your application. Tested to 250 psi

Black.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Cat. No.

D
D1
T
W
Nominal
Closed
Std.
Thickness
Width
Diameter Diameter
Pkg.
(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Cat. No.

D
D1
T
W
Nominal
Closed
Std.
Thickness
Width
Diameter Diameter
Pkg.
(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

Adjustable Cable Clamp

Adjustable Cable Clamp

GGNY-953-0-C

GGNY-344-0-C

0.41 10.41 0.34

GGNY-406-0-C

0.47 11.94 0.41 10.41

GGNY-1031-0-C 1.81 45.97 1.03 26.16

GGNY-468-0-C

0.53 13.46 0.47 11.94

GGNY-1250-0-C 1.44 36.58 1.25 31.75

GGNY-531-0-C

0.59 14.99 0.53 13.46

GGNY-593-0-C

0.66 16.76 0.59 14.99

GGNY-672-0-C

0.81 20.57 0.67 17.02

GGNY-1687-0-C 1.91 48.51 1.34 34.04

GGNY-750-0-C

0.88 22.35 0.75 19.05

GGNY-1875-0-C 2.13 54.10 1.88 47.75

GGNY-875-0-C

1.00 25.40 0.88 22.35

GGNY-2125-0-C 2.75 69.85 2.13 54.10

C60

8.64

0.7

1.78

0.22

5.59

100

0.95 24.13 0.41 10.41

GGNY-1406-0-C 1.63 41.40 1.41 35.81
GGNY-1593-0-C 1.81 45.97 1.59 40.39

0.7

1.78

0.31

7.87

0.36

9.14

100

0.40 10.16

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Cable Clamps and Clips
Choose the diameter you need to clamp a specific-sized cable
• Fully radiused inside edges with size markings in inches and millimeters for
easy identification
• Stocked in natural and black nylon 6.6
• Plain edge cable clamps are designed to perform to NAS-1397P
• 18 diameters and 2 widths with mounting holes for #8 and #10 screws
• Replace “-M” or “-D” with “-C ” for 100 pack

White
Cat. No.

Black
Cat. No.

H
Mounting
Hole Size

D1
Closed Dia.
(in.)

T
Thickness

E

(mm)

(in.)

(mm)

W
Width

(in.)

(mm)

(in.)

(mm)

0.05

1.27

0.38

9.53

X
(in.)

(mm)

Std.
Pkg.

Half Press Clips
N4NY-002-9-M

N4NY-002-0-M

0.13

3.18

0.34

8.71

N4NY-003-9-M

N4NY-003-0-M

0.19

4.475

0.38

9.60

N4NY-004-9-M

N4NY-004-0-M

0.25

6.35

0.42

10.70

N4NY-005-9-M

N4NY-005-0-M

0.31

7.92

0.44

11.20

N4NY-006-9-M

N4NY-006-0-M

0.38

9.53

0.46

11.79

N4NY-007-9-M

N4NY-007-0-M

0.44

11.10

0.50

12.70

N4NY-008-9-M

N4NY-008-0-M

0.50

12.70

0.53

13.46

N4NY-002B-9-M

N4NY-002B-0-M

0.13

3.18

0.34

8.71

N4NY-003B-9-M

N4NY-003B-0-M

0.19

4.475

0.38

9.60

N4NY-004B-9-M

N4NY-004B-0-M

0.25

6.35

0.42

10.70

N4NY-005B-9-M

N4NY-005B-0-M

0.31

7.92

0.44

11.20

N4NY-006B-9-M

N4NY-006B-0-M

0.38

9.53

0.46

11.79

N4NY-007B-9-M

N4NY-007B-0-M

0.44

11.10

0.50

12.70

N4NY-008B-9-M

N4NY-008B-0-M

0.50

12.70

0.53

13.46

N6NY-004C-9-M

N6NY-004C-0-M

0.25

6.35

0.44

11.10

N6NY-005C-9-M

N6NY-005C-0-M

0.31

7.92

0.47

12.04

N6NY-006C-9-M

N6NY-006C-0-M

0.38

9.53

0.50

12.70

N6NY-007C-9-M

N6NY-007C-0-M

0.44

11.10

0.53

13.54

N6NY-008C-9-M

N6NY-008C-0-M

0.50

12.70

0.55

14.05

N6NY-009-9-M

N6NY-009-0-M

0.56

14.27

0.60

15.32

N6NY-010-9-M

N6NY-010-0-M

0.63

15.88

0.63

15.88

N6NY-011-9-M

N6NY-011-0-M

0.69

17.45

0.67

16.89

N6NY-012-9-M

N6NY-012-0-M

0.75

19.05

0.70

17.75

N6NY-013-9-M

N6NY-013-0-M

0.81

20.62

0.77

19.43

N6NY-014-9-M

N6NY-014-0-M

0.88

22.23

0.80

20.19

N6NY-016-9-M

N6NY-016-0-M

1.00

25.40

0.83

21.00

N6NY-018-9-D

N6NY-018-0-D

1.13

28.58

0.94

23.88

N6NY-019-9-D

N6NY-019-0-D

1.19

30.15

0.96

24.46

N6NY-020-9-D

N6NY-020-0-D

1.25

31.75

0.98

24.90

N6NY-022-9-D

N6NY-022-0-D

1.38

34.93

1.05

26.54

N6NY-024-9-D

N6NY-024-0-D

1.50

38.10

1.11

28.30

#8

#10

1,000

0.22

0.06

1.52

0.50

5.54

12.70

1,000

For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

w w w. t n b. c a

C61

Ty-Rap

®

Fastening Products

Cable Clamps and Clips
Ideal for assembly applications
• Molded-in saddle washer enhances performance and
appearance
• Self-alignment feature makes this clamp ideal for
assembly applications
• 14 diameters and 2 widths with mounting holes for #4
through #10 screws
• UL Flammability W.NY 94 V-2; W.TZ 94 V-0

White
Cat. No.

D
Nominal Dia.
(in.)

(mm)

D1
Closed Dia.
(in.)

T
Thickness

E

(mm)

(in.)

(mm)

Self-Aligning Cable Clamps Natural Nylon
W4NY-125-9-M
0.63
3.18
0.11

2.90

0.33

W4NY-187-9-M

0.19

4.75

0.17

4.37

0.36

W4NY-250-9-M

0.25

6.35

0.23

5.94

0.38

9.70

W4NY-312-9-M

0.31

7.92

0.30

7.54

0.42

10.72

W4NY-375-9-M

0.38

9.53

0.36

9.12

0.45

W4NY-500-9-M

0.50

12.70

0.48

12.30

0.49

W6NY-187-9-M

0.19

4.75

0.17

4.37

W6NY-250-9-M

0.25

6.35

0.23

5.94

W6NY-312-9-M

0.31

7.92

0.30

W6NY-375-9-M

0.38

9.53

W6NY-437-9-M

0.44

11.10

W6NY-500-9-M

0.50

W6NY-562-9-M

0.56

W6NY-625-9-M
W6NY-687-9-M

(in.)

W
Width

8.46

0.26

6.53

9.02

0.22

5.54

0.19

4.83

0.20

5.21

11.53

0.21

5.33

12.45

0.27

6.86

0.38

9.53

0.24

6.12

0.41

10.34

0.24

6.12

7.54

0.45

11.30

0.28

6.60

0.36

9.12

0.48

12.30

0.29

7.39

0.42

10.72

0.52

13.26

0.26

6.68

12.70

0.48

12.30

0.56

14.22

0.27

6.91

14.27

0.55

13.90

0.66

16.69

0.24

6.00

0.63

15.88

0.61

15.47

0.64

16.18

0.29

7.37

0.69

17.45

0.67

17.10

0.69

17.63

0.33

8.31

W6NY-750-9-M

0.75

19.05

0.73

18.64

0.73

18.44

0.32

8.28

W6NY-812-9-M

0.81

20.62

0.80

20.24

0.78

19.71

0.32

8.20

W6NY-875-9-D

0.88

22.23

0.86

21.82

0.73

18.62

0.31

7.87

W6NY-1000-9-D

1.00

25.40

0.98

25.00

0.88

22.38

0.29

7.42

W6NY-1250-9-D

1.25

31.75

1.23

31.17

1.01

25.65

0.34

8.61

0.06

1.52

0.38

0.50

(mm)

9.53

12.70

(in.)

0.17

0.20

(mm)

X
(mm)

1.02

(in.)

H
Hole Dia.
(in.)

0.04

(mm)

• Stocked in natural and heat stabilized black nylon 6.6,
and fluoropolymer for harsh environments
• Item numbers molded-in for easy identification
• Replace “M’’ or “D’’ with “C’’ for 100 pack
• Temperature Rating: -40ºF to 185ºF (-40ºC to 85ºC)
Heat-Stabilized: -40ºF to 221ºF (-40ºC to 105ºC)
Fluoropolymer: -50ºF to 302ºF (-45ºC to 150ºC)

4.24

5.16

Std.
Pkg.

1,000

500

Self-Aligning Cable Clamps Heat-Stabilized Black Nylon
W4NY-125-0-M

0.13

3.18

0.11

2.90

0.33

8.46

0.26

6.53

W4NY-187-0-M

0.19

4.75

0.17

4.37

0.36

9.02

0.22

5.54

W4NY-250-0-M

0.25

6.35

0.23

5.94

0.38

9.70

0.19

4.83

W4NY-312-0-M

0.31

7.92

0.30

7.54

0.42

10.72

0.21

5.21

W4NY-375-0-M

0.38

9.53

0.36

9.12

0.45

11.53

0.21

5.33

W4NY-500-0-M

0.50

12.70

0.48

12.30

0.49

12.45

0.27

6.86

W6NY-187-0-M

0.19

4.75

0.17

4.37

0.38

9.53

0.24

6.12

W6NY-250-0-M

0.25

6.35

0.23

5.94

0.41

10.34

0.24

6.12

W6NY-312-0-M

0.31

7.92

0.30

7.54

0.45

11.30

0.28

6.60

W6NY-375-0-M

0.38

9.53

0.36

9.12

0.48

12.30

0.29

7.39

W6NY-437-0-M

0.44

11.10

0.42

10.72

0.52

13.26

0.26

6.68

C62

0.04

0.06

1.02

1.52

0.38

0.50

9.53

12.70

0.17

0.50

4.24

5.16

1,000

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Cable Clamps and Clips

White
Cat. No.

D
Nominal Dia.
(in.)

(mm)

D1
Closed Dia.
(in.)

(mm)

T
Thickness

E
(in.)

(mm)

Self-Aligning Cable Clamps Heat-Stabilized Black Nylon (cont’d)
W6NY-500-0-M
0.50
12.70
0.48
12.30
0.56
W6NY-562-0-M

0.56

14.27

0.55

13.90

0.66

W6NY-625-0-M

0.63

15.88

0.61

15.47

W6NY-687-0-M

0.69

17.45

0.67

17.10

W6NY-750-0-M

0.75

19.05

0.73

W6NY-812-0-M

0.81

20.62

W6NY-875-0-D

0.88

22.23

W6NY-1000-0-D

1.00

W6NY-1250-0-D

1.25

(in.)

14.22

0.27

6.91

16.69

0.24

6.00

0.64

16.18

0.229

7.379

0.69

17.63

0.33

8.31

18.64

0.73

18.44

0.3

8.28

0.80

20.24

0.78

19.71

0.32

8.20

0.86

21.82

0.73

18.62

0.31

7.87

25.40

0.98

25.00

0.88

22.38

0.29

7.42

31.75

1.23

31.17

1.01

25.65

0.34

8.61

0.50

(mm)

12.70

(in.)

0.20

(mm)

X
(mm)

1.52

(in.)

H
Hole Dia.
(in.)

0.06

(mm)

W
Width

5.16

Std.
Pkg.

1,000

500

Self-Aligning Cable Clamps for harsh environments Fluoropolymer (Aqua)
W4TZ-125-5-D

0.13

3.18

0.11

2.90

0.33

8.46

0.26

6.53

W4TZ-187-5-D

0.19

4.75

0.17

4.37

0.36

9.02

0.22

5.54

W4TZ-250-5-D

0.25

6.35

0.23

5.94

0.38

9.70

0.19

4.83

W4TZ-312-5-D

0.31

7.92

0.30

7.54

0.42

10.72

0.21

5.21

W4TZ-375-5-D

0.38

9.53

0.36

9.12

0.45

11.53

0.21

5.33

W4TZ-500-5-D

0.50

12.70

0.48

12.30

0.49

12.45

0.27

6.86

W6TZ-187-5-D

0.19

4.75

0.17

4.37

0.38

9.53

0.24

6.12

W6TZ-250-5-D

0.25

6.35

0.23

5.94

0.41

10.34

0.24

6.12

W6TZ-312-5-D

0.31

7.92

0.30

7.54

0.45

11.30

0.28

6.60

W6TZ-375-5-D

0.38

9.53

0.36

9.12

0.48

12.30

0.29

7.39

W6TZ-437-5-D

0.44

11.10

0.42

10.72

0.52

13.26

0.26

6.68

W6TZ-500-5-D

0.50

12.70

0.48

12.30

0.56

14.22

0.27

6.91

W6TZ-625-5-D

0.63

15.88

0.61

15.47

0.64

16.18

0.29

7.37

W6TZ-750-5-D

0.75

19.05

0.67

17.10

0.73

18.44

0.33

8.28

w w w. t n b. c a

0.04

0.06

1.02

1.52

0.38

0.50

9.53

12.70

0.17

0.20

4.24

5.16

500

C63

Ty-Rap

®

Fastening Products

Harnessing Accessories
Wires are held 1⁄2 in. above work surface
for easy tying

Several mounting styles available

• Consist of a spring-loaded clip and an elastic
bundle support
• Wires are inserted by snapping them through
spring-loaded clips

• Clamp acts as a retainer during
wire routing, and as a permanent
clamp when desired
Cat.
No.

Mounting
Hole Size
(in.) (mm)

Bundle
Max. Wire
Dia.
Width
(in.) (mm) (in.) (mm)

Mechanical-Locking Routing Clamps
TC88
0.50 12.7
0.25
6.35
TC95
1.00 25.4

Length
(in.)

(mm)

0.25

6.35

0.891

22.63

0.50

12.7

1.590

40.39

Std.
Pkg.

100

Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Cat.
No.

Max. Wire
Bundle Dia.

Fastener

Width

Height

(in.)

(mm)

(in.)

(mm)

Wire-Bundle Retainers
TC86
0.750
#6 screws
TC87
1.250

19.05

1.750

31.75

2.469

Std.
Pkg.

(in.)

(mm)

44.45

1.81

46.05

25

62.71

2.281

57.94

10

Hardened, nickel-plated,
steel construction

How it works:
• For wire harness board
manufacturing

A projecting prong is simply pressed into a 1⁄4 in. hole,
where it compresses and locks. The simple ratchettype lock is released by moving the locking lever.
•
•
•
•

Low installation cost
Releasable
For grouping wires in appliances, office equipment and other applications
Adjustable, self-locking clip requires no tools for installation
Mounting
Hole Size

Cat.
No.
Harness Clips
HCP438

Max. Wire
Bundle Dia.

(in.)

(mm)

(in.)

(mm)

0.250

6.35

0.375

9.53

Cat.
No.

Std.
Pkg.

1,000

A
(in.)

B
(mm)

Harness-Board Nails
HBP-1
1.00
HBP112
1.50
HBP2
2.00
HBP212
2.50
HBP3
3.00

25.40
38.10
50.80
63.50
76.20

Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

• AC-loop
• Easy to add
wires

0.625

C
(mm)

(in.)

(mm)

15.88

0.72
0.82
0.92
0.105
0.120

1.83
2.08
2.34
2.67
3.05

Std.
Pkg.

100

Offers extra support for wires and cables

Bundle
Maximum
Dia.
Wire Width Std.
Pkg.
(in.) (mm) (in.) (mm)
Bundle-Retaining Clamp
TC70
0.25 6.35
0.40 10.16
TC71
0.50 12.7
#10
screws
100
TC72
0.75 19.05
TC73
1.00 25.4
0.50
12.7
TC74
1.50 38.10
Cat.
No.

(in.)

• TC131 bulkhead mounting base can be installed
from either side
• Ties are installed through the clamp on
either side of the bulkhead

Mounting
Method

Rigid PVC construction.
For use in temperatures ranging from -40ºF to 122ºF (-40ºC to 50ºC).

Cat.
No.

Mounting
Method

Tie Width
Accom.
(in.)

(mm)

Maximum
Width

Length

Std.
Pkg.

(in.)

(mm)

(in.)

(mm)

1.115

28.32

1.890

48.00 1,000

Bulkhead Bundle Support Feedthrough
TC131

#6 screws

0.190

4.83

Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

5/8"

• For use with round bundles

Mounting Hole
for #6 Screw

9/16"
1/2"

Keep wire bundles apart

Range 1/2"

Cat.
No.

Max. Tie
Width
(in.)
(mm)

Size
(in.)

TY-RAP® Saddle Mounting Plate
TC92
0.190
4.83
1/2-1-1/4

(mm)

Std.
Pkg.

Cat.
No.

Max. Tie
Width Accom.
(in.)

(mm)

Width

Length

(in.) (mm) (in.) (mm)

Std.
Pkg.

Wire-Bundle Spacer
12.7-31.75

Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

C64

Bundle
Hole Size

#6 screws

100

TC5339

0.190

4.83

0.266 6.76 0.500 12.70

100

Natural nylon colour.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

w w w.tnb.c a

Ty-Rap

®

Fastening Products

Mounting Bases for Heavy-Duty Applications
Designed for indoor or outdoor use and heavy-duty applications
•
•
•
•

Quick and easy to install on existing metal framing channel
Installs with a push and twist
Smooth design protects cable insulation
Takes range of cable diameters

When fastening wire bundles, cables or hoses to framing channels, you can cut costs considerably by using the Ty-Rap® cable clamp. It’s made of smooth, weather-resistant nylon
and designed to protect cable insulation and hoses from wear or damage, which can occur with metal clamps. The clamp may be used for both indoor or outdoor applications. It
quickly installs in the framing channel with a simple push and twist. It requires no screws, nuts or tools. The clamp fits all 1-1/2 in. and 1-5/8 in. channels regardless of channel
depth.
Channel
Size
(in.)

Cat. No.

Framing Channel Clamp
TC5363X
1-1/2 and 1-5/8

Max. Tie
Width Accom.
(in.)
(mm)
0.301

Std.
Pkg.

7.65

50

Made from high-impact weather-resistant black nylon.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Specially designed head is range-taking
• Quick, easy installation without cumbersome adhesives or epoxies
• Provides a quick, easy and dependable means of attaching cable and wires to
masonry surfaces
• Installs by tapping it into a drilled hole
• It’s immediately ready to accept a cable tie and wire bundle — no tedious surface
preparation; no waiting for adhesives to set

Cat. No.

Hole Size in
Masonry
(in.)

Max. Tie
Width Accom.
(in.)
(mm)

Std.
Pkg.

Framing Channel Clamp
TC5358
1/4

0.190

4.83

100

TC5359

0.500

12.70

50

3/8

• Replaces a variety of anchors, clamps, screws and adhesives
• Designed for both indoor and outdoor applications
• Only two sizes to stock — reduces inventory

Made of a special impact and ultraviolet-resistant black nylon.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Weather-resistant!
• For use with lashing ties up to .500 in. width (i.e. TY5409)
• High impact

Cat. No.

Mounting
Method

Tid Width
Accom.

Maximum
Width

Length

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

0.500

12.70

0.750

19.05

1.750

44.45

Std.
Pkg.

Ty-Rap® Mounting Base for Lashing Tie
TC5355
#8 screws
TC5356

#10 screws

TC5357

1/4 in. screws

25

Black nylon construction.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

w w w. t n b. c a

C65

Ty-Rap

®

Fastening Products

Mounting Bases for Heavy-Duty
Applications
A fast and simple harnessing method for neat, versatile wire
management
Thomas & Betts Stud Mount Fastening System is a fast and simple harnessing method
for neat, versatile, cord, cable, hose, and wire management. Using a custom drill bit for
your 3⁄8 in. power drill, the Stud Mount base is quickly attached onto a threaded stud
or bolt to the proper torque—every time. The innovative “X” design of the base reliably
supports many types of cable or hose assemblies using a wide range of conventional
T&B® cable ties. Designed with 10 separate lashing positions, the Stud Mount offers
unlimited wire harnessing arrangements. T&B’s Stud Mount is available in four
convenient stud bolt sizes.

The Stud Mount Cable Fastening System includes a range of bases and the
custom drill bit that mounts all sizes.

• Great for harnessing wires, cables and hoses to truck and trailer chassis
• Fast, easy installation, using standard 3⁄8 in. power drill and application tool or
simply hammer on
• Unlimited harnessing flexibility using conventional T&B® cable ties
• Custom drill bit quickly installs base to proper torque — won’t crack or break
mounting base due to being overtightened
• Unique 4-way multi-directional design
• 10-position harness capability
• Available for 3⁄8 in., 1⁄2 in., 5⁄8 in., and 3⁄4 in. stud/bolt sizes
• Self-tapping thread design for reliable installation onto stud
• High pull-out strength of 500+ lb.

Cat. No.

Description

Stud
Size
(in.)

Material

Colour

Std.
Pkg.

Nylon,
UV Stabilized

Black

500

Tool Steel

–

1

Stud Mount Fastening System
XMNY-375-0-D
XMNY-500-0-D
XMNY-625-0-D
During installation, the custom Stud Mount drill bit application tool
ejects itself from mounting base, ensuring proper torque and preventing
cracking or breaking of the mount from being overtightened.

3/8
Mount Fastener

XMNY-750-0-D
WTXM

1/2
5/8
3/4

Application Tool

–

Material: Impact-resistant weatherable black nylon.
For use in temperatures ranging from -40ºF to 185ºF (-40ºC to 85ºC).

Virtually unlimited harnessing flexibility is provided in the unique
10-position harness design of the Stud Mount base.

C66

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Wire Protection Products
Spiral Wrap
Install with gaps for greater flexibility or butted together for
maximum abrasion resistance, insulation and rigidity!
•
•
•
•

Packaged in 100 foot reels
Protects bundles from 0.063 in. to 7 in. (1.6 mm to 177.8 mm) diameters
Available in three material types
Also commonly known as reverse cut, left-handed cut or
counter-clockwise cut
• For use with cutting tool SR-100 (see page C69)
• UL 94 HB Flammability Rating

Cat. No.

Material

Outside
Diameter

Pitch

(in.)

(mm)

(in.)

(mm)

Spiral Wrap
SRPE-125-9-C

0.125

3.18

0.210

SRPE-187-9-C

0.187

4.75

0.240

SRPE-250-9-C

0.250

6.35

SRPE-375-9-C

0.375

9.53

SRPE-500-9-C

Natural Polyethylene

Nominal Wall
Thickness

Minimum/Maximum
Bundle Range

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

5.33

0.35

0.89

0.06

1.60

0.50

12.70

6.10

0.040

1.02

0.13

3.18

1.50

38.10

0.375

9.53

0.045

1.14

0.19

4.78

2.00

50.80

0.438

11.13

0.052

1.32

0.31

7.95

3.00

76.20

0.500

12.70

0.563

14.30

0.062

1.57

0.38

9.53

4.00

101.60

SRPE-625-9-C

0.625

15.88

0.625

15.88

0.060

1.57

0.63

15.88

4.50

114.30

SRPE-750-9-C

0.750

15.88

0.750

19.05

0.65

1.65

0.75

19.05

5.00

127.00

SRPE-1000-9-C

1.000

25.40

1.110

28.19

0.70

17.78

1.00

25.40

7.00

177.80

SRPE-125-0-C

0.125

3.18

0.210

5.33

0.35

0.89

0.06

1.60

0.50

12.70

SRPE-187-0-C

0.187

4.75

0.240

6.10

0.040

1.02

0.13

3.18

1.50

38.10

SRPE-250-0-C

0.250

6.35

0.375

9.53

0.045

1.14

0.19

4.78

2.00

50.80

0.375

9.53

0.438

11.13

0.052

1.32

0.31

7.95

3.00

76.20

0.500

12.70

0.563

14.30

0.062

1.57

0.38

9.53

4.00

101.60

SRPE-625-0-C

0.625

15.88

0.625

15.88

0.060

1.57

0.63

15.88

4.50

114.30

SRPE-750-0-C

0.750

15.88

0.750

19.05

0.065

1.65

0.75

19.05

5.00

127.00

SRPE-1000-0-C

1.000

25.40

1.110

28.19

0.070

1.78

1.00

25.40

7.00

177.80

SRNY-187-9-C

0.190

4.75

0.240

6.10

0.025

0.64

0.13

3.18

1.50

38.10

SRNY-250-9-C

0.250

6.35

0.375

9.53

0.030

0.76

0.19

4.78

2.00

50.80

0.375

9.53

0.438

11.13

0.040

0.89

0.31

7.95

3.00

76.20

0.500

12.70

0.563

14.30

0.040

0.89

0.38

9.53

4.00

101.60

SRPE-375-0-C
SRPE-500-0-C

SRNY-375-9-C

Weatherable
Black Polyethylene

Natural Nylon 6.6

SRNY-500-9-C

Reel
Qty.

1 (100 ft.)

Sold in 100-ft. rolls.

Polyethylene
Available in natural
and weatherable black.
For general indorr use to
122ºF (50ºC). Material is
flexible and easy to work with.

w w w. t n b. c a

Weatherable
Polyethylene

Flame-Retardant
Polyethylene

Nylon 6.6

Fluoropolymer

Available in black only.

Available in white only.

Available in natural only.

Available in opaque colour.

Designed to resist ultraviolet
light in outdoor applications.

Material is UL 94 V-0
rated. More economical
and less rigid than nylon.

Offers highest abrasion
resistance and rigidity.
Self-extinguishing to
UL 94 HB and a UL
Recognized Component.

Excellent resistance to harsh
environments 338ºF (170ºC)
max operating temperature.

C67

Ty-Rap

®

Fastening Products

Wire Protection Products
Spiral Wrap
Perfect for protection of bundles from 0.063 in. to 7 in.
diameters
• Install with gaps for greater flexibility or butted together for maximum
abrasion resistance, insulation, and rigidity
• Available in three materials
• Also known as right-hand cut or clockwise cut
• Use cutting tool SR-100 (see page C69)

Cat. No.

Material

Outside
Diameter

Pitch

Nominal Wall
Thickness

Minimum/Maximum
Bundle Range

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

(in.)

(mm)

SRPE-125F-9-C

0.19

4.75

0.24

6.10

0.04

1.02

0.06

1.60

0.50

12.70

SRPE-187F-9-C

0.19

4.75

0.24

6.10

0.04

1.02

0.13

3.18

1.50

38.10

SRPE-250F-9-C

0.25

6.35

0.38

9.53

0.05

1.14

0.19

4.78

2.00

50.80

SRPE-375F-9-C

0.38

9.53

0.44

11.13

0.05

1.32

0.31

7.95

3.00

76.20

UL
Flammability

Reel
Qty.

Forward Cut Spiral Wrap

SRPE-500F-9-C

Natural Polyethylene

0.50

12.70

0.56

14.30

0.06

1.57

0.38

9.53

4.00

101.60

SRPE-625F-9-C

0.63

15.88

0.63

15.88

0.06

1.57

0.63

15.88

4.50

114.30

SRPE-750F-9-C

0.75

19.05

0.75

19.05

0.07

1.65

0.75

19.05

5.00

127.00

SRPE-1000F-9-C

1.00

25.40

1.11

28.19

0.07

1.78

1.00

25.40

7.00

177.80

SRPE-125F-0-C

0.19

4.75

0.24

6.10

0.04

1.02

0.06

1.60

0.50

12.70

SRPE-187F-0-C

0.19

4.75

0.24

6.10

0.04

1.02

0.13

3.18

1.50

38.10

SRPE-250F-0-C

0.25

6.35

0.38

9.53

0.05

1.14

0.19

4.78

2.00

50.80

0.38

9.53

0.44

11.13

0.05

1.32

0.31

7.95

3.00

76.20

0.50

12.70

0.56

14.30

0.06

1.57

0.38

9.53

4.00

101.60

SRPE-625F-0-C

0.63

15.88

0.63

15.88

0.06

1.57

0.63

15.88

4.50

114.30

SRPE-750F-0-C

0.63

15.88

0.75

19.05

0.07

1.65

0.75

19.05

5.00

127.00

SRPE-1000F-0-C

1.00

25.40

1.11

28.19

0.07

1.78

1.00

25.40

7.00

177.80

SRFR-125F-WH-C

0.19

4.75

0.24

6.10

0.04

1.02

0.13

3.18

1.50

38.10

0.19

4.75

0.24

6.10

0.04

1.02

0.19

4.78

2.00

50.80

0.25

6.35

0.38

9.53

0.05

1.14

0.31

7.95

3.00

76.20

0.38

9.53

0.44

11.13

0.05

1.32

0.38

9.53

4.00

101.60

SRFR-500F-WH-C

0.50

12.70

0.56

14.30

0.06

1.57

0.19

2.00

2.00

50.80

SRTL-250F-9-C

0.25

6.35

0.38

9.53

0.05

1.32

0.31

3.00

3.00

76.20

0.50

12.70

0.56

14.30

0.06

1.57

0.38

4.00

4.00

101.60

SRPE-375F-0-C
SRPE-500F-0-C

SRFR-187F-WH-C
SRFR-250F-WH-C
SRFR-375F-WH-C

SRTL-500F-9-C

Weatherable
Black Polyethylene

White
Flame-Retardant
Polyethylene

Fluoropolymer

94 HB

1 (100 ft.)

94 HB

Sold in 100-ft. rolls.

Polyethylene
Available in natural
and weatherable black.
For general indoor use to
122ºF (50ºC). Material is
flexible and easy to work with.

C68

Weatherable
Polyethylene

Flame-Retardant
Polyethylene

Nylon 6.6

Fluoropolymer

Available in black only.
Designed to resist ultraviolet
light in outdoor applications.

Available in white only.

Available in natural only.

Available in opaque colour.

Material is UL 94 V-0
rated. More economical
and less rigid than nylon.

Offers highest abrasion
resistance and rigidity.
Self-extinguishing to
UL 94 HB and a UL
Recognized Component.

Excellent resistance to harsh
environments 338ºF (170ºC)
max operating temperature.

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Wire Protection Products
Molded Grommeting
Suitable for round hole or odd-shape applications!
• Meets MS21266
• Available in three materials for panel thicknesses from
0.015 in. to 0.192 in.
• Grommet is used to protect panel edges and knockouts
where the chafing of passing wires is a concern
• Also available in fluoropolymer material for harsh environments
• Strip length – 12-3/4 in.

Std.
Cat. No.

A

Bulk
Cat. No.

B

C

For Panel
Thickness

D

Material
(in.) (mm) (in.) (mm) (in.) (mm) (in.) (mm)

(in.)

(mm)

Military
Standard
Numbers

Std. Bulk
Pkg. Pkg.

Molded Grommeting
GSNY-052-9-C

–

GSNY-085-9-C

–

GSNY-128-9-C

–

GSNY-192-9-C
GSTZ-052-9-C

0.15

3.81

0.06

1.42

0.18

4.45

0.09

2.29

0.22

5.59

0.13

3.33

–

0.36

8.26

0.20

4.95

–

0.15

3.81

0.06

1.42

GSTZ-085-9-C

–

Fluoropolymer 0.18

4.45

0.09

2.29

GSTZ-128-9-C

–

0.22

5.59

0.13

3.33

0.15

3.81

0.06

1.42

0.15

3.81

0.06

1.42

0.02-0.052 0.38-1.32

0.18

4.45

0.09

2.29

0.05-0.085 1.35-2.16

0.22

5.59

0.13

3.33

0.09-0.128 2.18-3.25

Natural
Nylon 6.6

GSFR-052-WH-C –
–

GSFR-052-WH-D

GSFR-085-WH-C –

FlameRetardant
White

GSFR-128-WH-C –

0.02-0.052 0.38-1.32 MS-21266-1N
0.16

3.94

0.05-0.085 1.35-2.16 MS-21266-2N
0.09-0.128 2.18-3.25 MS-21266-3N

0.23

5.84

0.19-0.192 3.25-4.88 MS-21266-4N
0.10

0.02-0.052 0.38-1.32 MS-21266-1T

100

–

–

500

2.54 0.05-0.085 1.35-2.16 MS-21266-2T
0.09-0.128 2.18-3.25 MS-21266-3T

0.16

3.94

0.02-0.052 0.38-1.32
–

100

–

High-carbon, Teflon® coated steel blade!
Use our SR-100 cutting tool for all your spiral wrap, plastic pipe and PVC conduit
needs up to 1-1/4 IN. I.D.
• Contoured handle resists tube crushing
• Produces no “sawdust” — no need to debur
• Lightweight, low-profile and no exposed blade when stored

Cat. No.

Description

SR-100 Cutting Tool
SR-100
SR-R

Cutting Tool
Replacement blade

Teflon is a trademark of the DuPont Corporation.
®

w w w. t n b. c a

C69

Ty-Rap

®

Fastening Products
Wire Protection Products
Extruded Grommeting

A

Line panel
edges and
knockouts!

D
C
B

Cat. No.
Extruded Grommeting
GRNY-040-9-C
GRNY-052-9-C
GRNY-062-9-C
GRNY-085-9-C
GRNY-100-9-C
GRNY-125-9-C
GRNY-187-9-C
GRNY-250-9-C
GRNY-040-0-C
GRNY-052-0-C
GRNY-062-0-C
GRNY-085-0-C
GRNY-100-0-C
GRNY-125-0-C
GRNY-187-0-C
GRNY-250-0-C
GRPE-040-9-C
GRPE-052-9-C
GRPE-062-9-C
GRPE-085-9-C
GRPE-100-9-C
GRPE-125-9-C
GRPE-187-9-C
GRPE-250-9-C
GRUPE-040-9-C
GRUPE-052-9-C
GRUPE-062-9-C
GRUPE-085-9-C
GRUPE-100-9-C
GRUPE-125-9-C
GRUPE-187-9-C
GRUPE-250-9-C
GRFR-040-WH-C
GRFR-052-WH-C
GRFR-062-WH-C
GRFR-085-WH-C
GRFR-100-WH-C
GRFR-125-WH-C
GRFR-187-WH-C
GRFR-250-WH-C

C70

Material

Natural Nylon

Black Nylon

Natural
Polyethylene

Solid Wall
Polyethylene

Flame-Retardant
White Polyethylene

A
Max. Panel
Thickness
(in.)
(mm)
0.04
0.05
0.06
0.09
0.10
0.13
0.19
0.25
0.04
0.05
0.06
0.09
0.10
0.13
0.19
0.25
0.04
0.05
0.06
0.09
0.10
0.13
0.19
0.25
0.04
0.05
0.06
0.09
0.10
0.13
0.19
0.25
0.04
0.05
0.06
0.09
0.10
0.13
0.19
0.25

1.02
1.32
1.57
2.16
2.54
3.18
4.75
6.35
1.02
1.32
1.57
2.16
2.54
3.18
4.75
6.35
1.02
1.32
1.57
2.16
2.54
3.18
4.75
6.35
1.02
1.32
1.57
2.16
2.54
3.18
4.75
6.35
1.02
1.32
1.57
2.16
2.54
3.18
4.75
6.35

• Used to line panel edges and
knockouts where the chafing of
passing wires is a concern
• Available in 8 stock sizes in 100-ft.
lengths for panels from 0.040 in.
(1.02 mm) to 0.250 in. (6.35 mm)
thick

• A variety of stocked materials to
cover a wide range of applications
• Solid Wall Polyethylene is ideal for
protection of glass, sheet metal,
wood panels, or other sheet-form
materials

B
Grommeting
Thickness
(in.)
(mm)

C
Grommeting
Height
(in.)
(mm)

D
Grommeting
Width
(in.)
(mm)

0.04

0.19

4.83

0.13

3.18

0.20

5.08

0.17

4.32

0.22

5.89

0.27
0.28

6.86
7.11

0.21
0.20
0.28
0.37

5.33
5.21
6.99
9.40

0.19

4.83

0.13

3.18

0.20

5.08

0.17

4.32

0.22

5.89

0.27
0.28

6.86
7.11

0.21
0.20
0.28
0.37

5.33
5.21
6.99
9.40

0.19

4.83

0.13

3.18

0.20

5.08

0.17

4.32

0.22

5.89

0.27
0.28

6.86
7.11

0.21
0.20
0.28
0.37

5.33
5.21
6.99
9.40

0.19

4.83

0.13

3.18

0.20

5.08

0.17

4.32

0.22

5.89

0.27
0.28

6.86
7.11

0.21
0.20
0.28
0.37

5.33
5.21
6.99
9.40

0.19

4.83

0.13

3.18

0.20

5.08

0.17

4.32

0.22

5.89

0.27
0.28

6.86
7.11

0.21
0.20
0.28
0.37

5.33
5.21
6.99
9.40

0.05

0.04

0.05

0.04

0.05

0.04

0.05

0.04

0.05

1.02

1.32

1.02

1.32

1.02

1.32

1.02

1.32

1.02

1.32

UL
Flammability

Reel
Qty.

94 V-2

1 (100 ft.)

94 HB

94 V-0

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Wire Protection Products
Braided Sleeving

Types of Materials

Available in handy mini spools or bulk reels!
Thomas & Betts braided wire protection sleeving is used to bundle and protect wires and
cables from abrasion and excessive wear. Its flexible, lightweight, open weave construction installs easily over a variety of bundle diameters and shapes. The sleeving is resistant
to chemicals, fungus, fuels, UV sunlight, and has an indefinite shelf life. It’s easily cut with
a hot knife, which seals the end, preventing fraying. Ends can be secured using Ty-Rap®
cable ties.
Available in:
•
•
•
•
•

Handy mini spools or bulk reels
Eight sizes from 1/8 in. (3.18 mm) to 2-1/2 in. (63.5 mm) nominal I.D. size
Solid or wraparound hook and loop braided expandable wire sleeving
Meets UL94V-1
Meets Federal Motor Vehicle Standard No. FMV SS 302

Polyethylene Terephthalate (P.E.T.)

F – Flame Retardant Polyethylene
Terephthalate (P.E.T.)

A black 0.010 in. (0.25mm)
polyester monofilament material
designed for indoor and outdoor
applications. It’s rated for
continuous operating temp.
-103ºF to 257ºF (-75ºC to 125ºC).

A 0.010 in. (0.25 mm) selfextinguishing polyester
monofilament material that can be
used indoors and outdoors. It’s
provided in black with white tracer
for identification, and is rated for
continuous operating temp.
-103ºF to 257ºF (-75ºC to 125ºC).
Meets UL 94V-1 Flammability
Rating.

Catalogue Number System
Nominal I.D.
Cat. No.

Nominal Diameter Range
Colour

(in.)

(mm)

Reel Size
(in.)

(mm)

0.125 to 0.375

3.18 to 9.53

0.187 to 0.625

4.75 to 15.88

Std.
Pkg.

Braided Expandable Wire Protection Sleeving
S250PT-0

0.250

6.35

S375PC-0

0.375

9.53

Black

M = 1000 ft.
D = 500 ft.
K = 250 ft.
T = 200 ft.
C = 100 ft.
L = 50 ft.

1

1

S = Braided Expandable Wire Sleeving

w w w. t n b. c a

Materials

Nominal I.D. Equivalents

P = P.E.T. (Polyethylene Terephthalate)
F = Flame-retardant P.E.T.
PW = P.E.T. hook & loop wraparound sleeving
FW = Flame-retardant P.E.T. hook & loop
wraparound sleeving

0.125 = 1/8 in.
0.250 = 1/4 in.
0.375 = 3/8 in.
0.500 = 1/2 in.
0.750 = 3/4 in.

1.250 = 1-1/4 in.
1.500 = 1-1/2 in.
1.750 = 1-3/4 in.
2.000 = 2 in.
2.500 = 2-1/2 in.

C71

Ty-Rap

®

Fastening Products

Wire Protection Products
Braided Sleeving

Types of Materials

Cat. No.

Nominal I.D.

Colour

Nominal Diameter
Range

(in.)
(mm)
(in.)
(mm)
P.E.T. Braided Expandable Wire Sleeving — Mini Spool
S250PT-0
0.25
6.35
0.13 to 0.38
3.18 to 9.53
S375PC-0
0.38
9.53
0.19 to 0.63 4.75 to 15.88
S500PC-0
0.50
12.70
Black
0.25 to 0.75 6.35 to 19.05
S750PC-0
0.75
19.05
0.50 to 1.25 12.70 to 31.75
S1250PL-0
1.25
31.75
0.75 to 31.75 19.05 to 44.45

Spool
Quantity

Std.
Pkg.

200 ft. / 60.96 m
125 ft. / 38.10 m
100 ft. / 30.48 m

1

50 ft. / 15.24 m

NOTE: Order by spool, not per foot.

Safety first!

Cat. No.

Nominal I.D.

Colour

Nominal Diameter
Range

(in.)
(mm)
(in.)
Flame Retardant Braided Expandable Wire Sleeving — Mini Spool
S250FT-0
0.25
6.35
0.13 to 0.38
S500FC-0
0.50
12.70
0.25 to 0.75
Black with
White Tracer 0.50 to 1.25
S750FC-0
0.75
19.05
S1250FL-0
1.25
31.75
0.75 to 31.75

(mm)
3.18 to 9.53
6.35 to 19.05
12.70 to 31.75
19.05 to 44.45

Spool
Quantity

Std.
Pkg.

200 ft. / 60.96 m
100 ft. / 30.48 m

1

50 ft. / 15.24 m

NOTE: Order by spool, not per foot.

Enables for easy wrapping of existing wire harnesses and cables!

Cat. No.

Nominal I.D.

Colour

Nominal Diameter Range

(in.)
(mm)
(in.)
P.E.T. Hook and Loop, Wraparound Sleeving — Mini Spool
S500PWL-0
0.50
12.70
0.25 to 0.75
S750PWL-0
0.75
19.05
0.50 to 1.25
Black
S1250PWL-0
1.25
31.75
0.75 to 31.75
S2000PWL-0
2.00
50.80
1.50 to 3.50

(mm)
6.35 to 19.05
12.70 to 31.75
19.05 to 44.45
38.10 to 88.90

Spool
Quantity

Std.
Pkg.

50 ft. / 15.24 m

1

Spool
Quantity

Std.
Pkg.

50 ft. / 15.24 m

1

NOTE: Order by spool, not per foot.

• No tools required to close the sleeving
• Hook and loop material is made of 100%
nylon

Convenient for rework without disrupting existing connection!

Cat. No.

Nominal I.D.

Colour

Nominal Diameter Range

(in.)
(mm)
(in.)
Flame Retardant Hook and Loop, Wraparound Sleeving — Mini Spool
S500FWL-0
0.50
12.70
0.25 to 0.75
Black with 0.50 to 1.25
S750FWL-0
0.75
19.05
White
S1250FWL-0
1.25
31.75
0.75 to 31.75
Tracer
S2000FWL-0
2.00
50.80
1.50 to 3.50

(mm)
6.35 to 19.05
12.70 to 31.75
19.05 to 44.45
38.10 to 88.90

NOTE: Order by spool, not per foot.

C72

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Wire Protection Products
Braided Sleeving

Buy in bulk and save!

Cat. No.

Nominal I.D.

Nominal Diameter Range

Colour

(in.)
(mm)
(in.)
P.E.T. Braided Expandable Wire Sleeving — Bulk Reel
S125PM-0
0.125
3.18
0.09 to 0.250
S250PM-0
0.25
6.35
0.125 to 0.375
S500PD-0
0.50
12.70
0.25 to 0.75
S750PK-0
0.75
19.05
0.50 to 1.25
S1250PK-0
1.25
31.75
Black
0.75 to 1.75
S1500PT-0
1.50
38.10
1.00 to 2.50
S1750PT-0
1.75
44.45
0.125 to 0.375
S2000PT-0
2.00
50.80
1.50 to 3.50
S2500PT-0
2.50
63.50
1.75 to 4.50

(mm)
2.39 to 6.35
3.18 to 9.53
6.35 to 19.05
12.70 to 31.75
19.05 to 44.45
25.40 to 63.50
31.75 to 59.85
38.10 to 88.90
44.45 to 114.30

Reel
Quantity

Std.
Pkg.

1,000 ft. / 304.80 m
500 ft. / 152.40 m
250 ft. / 76.20 m

1

200 ft. / 60.96 m

NOTE: Order by spool, not per foot.

Choose from a variety of reel sizes!

Cat. No.

Nominal I.D.

Nominal Diameter Range

Colour

(in.)
(mm)
(in.)
Flame Retardant Braided Expandable Wire Sleeving — Bulk Reel
S125FM-0
0.125
3.18
0.09 to 0.250
S250FM-0
0.25
6.35
0.125 to 0.375
Black with
S375FD-0
0.38
9.53
0.19 to 63
White Tracer
S500FD-0
0.50
12.70
0.25 to 0.75
S750FK-0
0.75
19.05
0.50 to 1.25

(mm)
2.39 to 6.35
3.18 to 9.53
4.75 to 15.88
6.35 to 19.05
12.70 to 31.75

S750FK-9

0.75

19.05

White with
Black Tracer

0.50 to 1.25

12.70 to 31.75

S1250FK-0
S1750FT-0

1.25
1.75

31.75
44.45

Black with
White Tracer

0.75 to 1.75
0.125 to 0.375

19.05 to 44.45
31.75 to 59.85

S1750FT-9

1.75

44.45

White with
Black Tracer

0.125 to 0.375

31.75 to 59.85

S2000FT-0
S2500FT-0

2.00
2.50

50.80
63.50

Black with
White Tracer

1.50 to 3.50
1.75 to 4.50

38.10 to 88.90
44.45 to 114.30

Reel
Quantity

Std.
Pkg.

1,000 ft. / 304.80 m
500 ft. / 152.40 m

250 ft. / 76.20 m

1

200 ft. / 60.96 m

NOTE: Order by spool, not per foot.
For other colours, lengths, sizes and materials, please Contact your Regional Sales Office.

The right tool for the job!

Cat. No.

Description

Sleeving End Cutter/Sealer Tools
WTBM
Benchmount End Cutter/Sealer Tool, 110V AC

Std.
Pkg.

1

It’s recommended that the sleeving be cut with a hot knife for a straight cut and to seal the ends, which prevents fraying.

w w w. t n b. c a

C73

Ty-Rap

®

Fastening Products

Cable Tie Installation Tools
The most comfortable and efficient hand tool available for installing
cable ties!
Thomas & Betts set out to develop a high performance and very reliable hand-operated
cable tie installation tool. It’s ergonomic with more features than any competing tool on the
market. This new and improved Ty-Rap® Cable Tie Installation Tool is the result, and it fits
the bill in every aspect. Our engineers carefully considered user comfort and designed this
rugged yet lightweight, well-balanced tool to reduce stress, fatigue and the risk of carpal
tunnel syndrome and other cumulative trauma disorders to the hand and wrist. They didn’t
stop with ergonomics, however. This new tool offers a flush cable tie tail-to-head trim, a
longer handle stroke requiring less handle force, higher tension capabilities and much, much
more!
Designed for Efficiency
• Wide cable-tie insertion gap makes it easier to insert tie into tool
• Tension adjustment wheel on nose offers easy access and quick setting — about five
times faster than competing tools!
• Tension-locking mechanism maintains constant tension setting, even when tool is
frequently put down and picked up again
• Flush tail-to-head cut-off eliminates sharp cable tie ends that can cut or scratch
installers, wires and nearby devices
• Longest stroke length available on the market — a full 1 in. — means fewer handletensioning cycles to save time and lower installation costs

NEW!

Designed for Comfort
• 360° rotating nose offers maximum flexibility in any position, especially in tight spaces —
no twisting of tool required!
• Adjustable grip span adapts to fit large or small hands
• Anti-recoil cut-off mechanism reduces shock and vibration to hand and wrist
• High-low handle travel feature offers lowest handle force with highest tension in any
hand-operated cable tie installation tool on the market
• Handles constructed from rugged, lightweight, high-impact polymer in a balanced design
with soft, over-molded, round-edged grips for added user comfort

Specifications
• Dimensions: 7 in. (177 mm) L x 5 in. (127 mm) H x 1-5/8 in. (41.3 mm) W
• Weight: 9 oz. (255 g)

Cat. No.

Description

Ty-Rap® Cable Tie Installation Tool
ERG50
Tool for 18–50 lb. (80–222 N.) Cable Ties
ERG120
Tool for 50–120 lb. (222–533 N.) Cable Ties

C74

Std.
Pkg.

1

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Cable Tie Installation Tools
Boost productivity and reduce user fatigue in demanding, high-volume
cable tie installations!
For fast, consistent installation of cable ties in high-volume applications, you can’t beat the new
Ty-Rap® Pneumatic Cable Tie Installation Tool. Pneumatic power combined with a balanced,
ergonomic design enables you to tension and trim large quantities of Ty-Rap® cable ties in rapid
succession with accuracy and one-button ease.
• Easy, one-step tensioning and cut-off of cable ties
• Narrow nose rotates 360º to maneuver in tight spaces
• Easy-access tension-adjustment wheel at nose with locking mechanism for
repetitive-tension work
• Spare cutting blade storage in handle
• Cuts tail off flush — no sharp ends to injure installers or damage cables
• Holds tails captive until ejected by operator — no mess to clean up
• Soft, over-molded grip with over-sized trigger
• Wide cable-tie insertion gap — no fumbling to insert tie
Specifications
•
•
•
•

Dimensions: 10 in. L x 6-1/4 in. H x 1-5/8 in. W
Weight: 14 oz.
Operating Pressure: 85–100 psi (non-lubricated air)
Cable Tie Tensile-Strength Range: 18–50 lb.

Cat. No.

Std.
Pkg.

Description

Ty-Rap® Pneumatic Cable Tie Installation Tool
ERG50P

Pneumatic Cable Tie Installation Tool 1
for 18–50 lb. Ties (includes 9-ft. air hose)

Tightens cable tie and cuts flush in one step

w w w. t n b. c a

1

360° rotating nose for maximum flexibility

Narrow-shaped nose for easy reach in tight
spaces

C75

Ty-Rap

®

Fastening Products

Cable Tie Installation Tools
Lightweight. Economical. Durable. Perfect for spot-tying!
They cinch up the tie with a squeeze action, and cut away the excess tail when twisted
180º. A specially designed pawl cuts away the tail if the tension limit is exceeded, thereby
preventing the cable tie from being over-tightened.
• Installs Ty-Rap® cable ties up to 0.301 in. wide by 0.080 in. thick
• Designed for use by both left- and right-handed operators
• Lightweight, high-impact polymer and steel components

Cat. No.

Description

Ty-Rap® Cable Tie Installation Tool — Light Duty
WT1-TB
Cable Tie Installation Tool, 18–50 lb.(80–222.4 N)
WT2-TB
Cable Tie Installation Tool, 50–120 lb.(222.4–533.8N)

Cuts tail off — flush

Get the job done right!

•
•
•
•
•

•
•
•
•

Installs Ty-Rap cable ties
Rugged metallic construction
Pistol-grip installation tool
Easy tension adjustment
Tensions and cuts tie tail off flush
®

Cat. No.

Description

Tie Body Width

(in.)
Ty-Rap® Cable Ties Installation Tool — Metallic

WT193A

Cable Tie Installation Tool,
18–50 lb. (80-222.4N)

0.09 - 0.18

(mm)

Std.
Pkg.

2.39 - 4.67

1

(in.)

(mm)

0.09 - 0.18 2.39 - 4.67
0.18 - 0.301 4.67 - 7.65

Std.
Pkg.

1

Installs Ty-Rap® stainless steel cable ties
Rugged stainless steel construction
Pistol-type installation tool
Adjustable tension settings

Cat. No.

Description

Tie Body Width

(in.)
Ty-Rap® Heavy-Duty Installation Tool — Stainless Steel

DAS250

Stainless Steel
Installation Tool

Easy tension adjustment!

Makes tie installation easy!

•
•
•
•

WT3D
• Installs both self-locking Ty-Rap® cable ties
and lashing ties

Installs Ty-Rap® cable ties
Rugged metallic construction
Pistol-grip installation tool
Tensions and cut cable tie tail off flush

Tie Body Width

0.31

(mm)

Std.
Pkg.

7.87

1

WT3S
• Installs stainless steel ties
Cat. No.

Description

Tie Body Width

(in.)
(mm)
Ty-Rap® Heavy-Duty Installation Tool — Mil Spec Approved

WT199
WT197

Installation Tool, 18–50 lb.
(80–222.4N)
Installation Tool, 50–120 lb.
(222.4–533.8N)

Std.
Pkg.

Description

Tie Body Width

(in.)
Ty-Rap® Installation Tool — Deltec & Stainless Steel

0.09 - 0.18 2.39 - 4.67
1
0.18 - 0.30 4.67 - 7.65

Cat. No.

WT3D

Deltec Installation Tool

WT3S

Stainless Steel Installation Tool

(mm)

0.18 - 0.50

4.67 - 12.70

0.50

12.70

Std.
Pkg.

1

Mil Spec Approved (WT199 — MS90387-1, WT197 — MS90387-2)

C76

w w w. t n b. c a

Ty-Rap

®

Fastening Products

Cable Tie Installation Tools

A lightweight tool for least critical applications. Cinch tie to desired bundle and twist tool to
remove excess strap. Recommended for use with 18 - 50 pound ties.

Cat. No.
QC-100 (plastic)

Description

Tie Body
Width
(in.)

Cable Tie Tool
QC-100
Cable Tie Tool, 18-50 lb. tension Plastic Handle

0.094 - 0.184

Std.
Pkg.

1

Economy tool for use with 18 - 50 pound ties. Automatic cut-off removes excess strap flush against cable tie head. Tool is
equipped with adjustable tensioning.

Cat. No.

Description

Tie Body
Width
(in.)

Cable Tie Tool
L-200
Cable Tie Tool, 18-50 lb. tension Steel Handle

0.094 - 0.184

Std.
Pkg.

1

L-200 Metal (steel)

Rugged construction makes this tool ideal for use with our 120 - 175 pound ties. Cinch tie to desired bundle and pull trigger
to cut excess flush at Cable Tie head. Field proven durability.

Cat. No.

Description

Tie Body
Width
(in.)

L-300C Metal (steel)

Cable Tie Tool
L-300C
Cable Tie Tool, 120-175 lb. tension Steel Handle

0.301 - 0.345

Std.
Pkg.

1

Heavy Duty tool for use with 18 - 50 pound ties. Automatic cut-off and adjustable tensioning for dependable use in assembly
applications.

Cat. No.

Description

Tie Body
Width
(in.)

Cable Tie Tool
L-400C
Cable Tie Tool, 18-50 lb. tension Plastic Handle

0.094 - 0.184

Std.
Pkg.

1

L-400-C (plastic)

w w w. t n b. c a

C77

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : CAJOPIC
Create Date                     : 2014:05:12 10:12:52-04:00
Modify Date                     : 2014:09:22 09:43:02-04:00
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : QuarkXPress(R) 8.51
Metadata Date                   : 2014:09:22 09:43:02-04:00
Producer                        : Acrobat Distiller 10.1.9 (Windows)
Format                          : application/pdf
Title                           : Mise en page 1
Creator                         : CAJOPIC
Document ID                     : uuid:82696ae1-6568-4623-ac00-f35886dce29e
Instance ID                     : uuid:576cb9b5-6159-4896-9f23-901ca3252848
Page Count                      : 77

EXIF Metadata provided by EXIF.tools

Mise En 651607 Catalog

137819-Catalog 137819-Catalog 137819-Catalog Batch10 unilog cesco-content

580099-Catalog 580099-Catalog 580099-Catalog 728494 Batch10 unilog cesco-content

131811-Catalog 131811-Catalog 131811-Catalog Batch9 unilog cesco-content

Navigation menu

Versions of this User Manual:

Views

Navigation