Material Safety Data Sheet 714565 MSDS
714565 Msds 714565_MSDS 714565_MSDS MSDS s sunlightsupply 3:
2017-04-29
: Pdf 714565 Msds 714565_MSDS product s
Open the PDF directly: View PDF .
Page Count: 3
Download | |
Open PDF In Browser | View PDF |
Material Safety Data Sheet Date Reviewed and Issued: October 15, 2010 MSDS# 3001 Section 1. Identification: Retail Coir Product Names: • Sunshine Just Coir • Black Gold Just Coir Manufacturer/Supplier: Sun Gro Horticulture Canada Ltd. P.O. Box 189 Seba Beach, AB T0E 2B0 For more information call: Western Region 1-888-797-7328 Central Region 1-888-982-4500 Eastern Region 1-888-896-1222 For more information: www.sungro.com Product Uses: Horticulture Section 2. Hazardous Ingredient & Composition OSHA PEL ACGIH TLV Component CAS# Total Respirable Total Respirable Nuisance dust Not Applicable 15 mg/m3 5 mg/m3 10 mg/m3 3 mg/m3 Comments: This product is not considered to be hazardous in accordance with the OSHA Hazard Communication Standard 29 CFR 1910.1200, Health Hazard. The product is classified by ACGIH as a “Nuisance Dust” or “Particulates Not Otherwise Classified” (PNOC). See product label for ingredients and product specific information. Section 3. Physical/Chemical Characteristics Physical State: Solid Appearance: Granular with fibers Boiling Point: Not applicable Vapor Pressure: Not applicable Color: Tan to brown, earthy color Odor: None Solubility in Water: Not applicable Melting point: Not applicable pH: 4.0 – 8.0 Density (60% H20): 15–25 lb/cf or 240-400 g/l Evaporation rate: Not applicable Specific gravity: Not applicable 1 Section 4. Fire and Explosion Hazard Data Flash Point: Not Applicable Flammable Limits: Not Applicable Extinguishing Media: Water, fog or spray Special Fire Fighting None. Caution, burning may continue inside bags or piles Procedures: after surface fire is out. Break bags or separate pile to assure that the fire is extinguished. The thermal decomposition products are those commonly observed with natural products such as wood or other vegetative matter. Unusual Fire and Explosion Hazards: None Section 5. Stability and Reactivity Stability: Stable Conditions to Avoid: See label. Keep away from heat, sparks and open flames. Incompatibility: None known Hazardous Decomposition or High temperatures or fire may produce irritating gases and Byproducts: vapors. Polymerization: Will not occur Incompatible Materials: None known Section 6. Health Hazard Data Routes of Entry: Inhalation, open wounds and eyes Health Hazards: Nuisance dust. See product label for ingredients Carcinogenity: None known Effects of Exposure: Inhalation over long periods of high amounts of any nuisance dust may overload lung clearance mechanism, irritate mucous membranes and make lungs more vulnerable to respiratory disease. Emergency and First Aid If inhaled, provide fresh air. If eye irritation occurs, flush with Procedures: water. Keep open wounds covered and clean as suggested by any good program of hygiene. Other Concerns: Keep out of reach of children and pets. Section 7. Toxicological Information General Comments: Inhalation of dust may irritate nose, throat and lungs. Eye contact with solids may produce irritation, tearing or blinking as a foreign body in the eye. 2 Section 8. Precautions for Safe Handling and Use Steps to be taken in case Use methods to clean spill which avoid creating airborne material is spilled: dust. Waste Disposal Method: According to EPA 40 CFR 261.3, waste of this product is not defined as hazardous. Dispose of all waste in accordance with federal, state and local regulations. Precautions to be taken in If excessive dust is created avoid breathing dust by using handling and storage: adequate ventilation and/or using NIOSH or MSHA approved respirator for nuisance dust of this type. Breathing dust may be harmful to your health. Keep inside away from water. Other Precautions: Protective eyewear should be worn where dust levels are high enough to cause irritation. Ecological Information: Keep out of lakes, streams or ponds. Section 9. Control Measures Respiratory Protection: If dust is created use NIOSH or MSHA approved respirator for nuisance dust of this type. Ventilation: Local exhaust advisable if excessive dust is created. Protective Gloves: Not normally necessary but suggested in cases of open wounds that are not appropriately protected. Eye Protection: Protective eyewear should be worn where dust levels are high enough to cause irritation. Other Protective Clothing or Equipment: Normal work clothing Work/Hygienic Practices: NIOSH or MSHA approved respirator, eye protection and ventilation under conditions where excessive dust is created. Open wounds should be kept clean and suitably protected. Section 10. Supplemental Information These materials are made from natural products and may contain naturally occurring microorganisms. Proper precautions are advised to prevent infection of open wounds, inhalation of excessive amounts of dust and eye irritation. The proper hygiene practices necessary to prevent health hazards from any naturally occurring substance such as soil, bark, etc., should be observed. The information contained in this MSDS is provided without warranty of any kind, express or implied. The information contained herein is made available solely for consideration, investigation, and verification by the original recipients hereof. Users should consider this information only as a supplement to other information gathered by or available to them. Users should make independent determinations of the suitability and completeness of information from all sources to assure proper use and disposal of these materials for the safety and health of employees, customers, and the environment. This hazard information is not a substitute for risk assessment under actual conditions of use. Users have the responsibility to keep currently informed on chemical hazard information, to design and update their own programs, and to comply with all applicable national, federal, state, and local laws and regulations regarding safety, occupational health, right to know, and environmental protection. 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Kathryn Louis Comments : Company : Sun Gro Horticulture Create Date : 2010:10:15 11:49:09-07:00 Modify Date : 2011:10:19 11:12:12-07:00 Source Modified : D:20101015184356 Subject : Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2011:10:19 11:12:12-07:00 Creator Tool : Acrobat PDFMaker 9.1 for Word Document ID : uuid:353fc827-2815-4c7b-8d7a-c54ce61668aa Instance ID : uuid:fed64774-087f-4692-bd82-06daaefd0d7f Format : application/pdf Title : Material Safety Data Sheet Description : Creator : Kathryn Louis Producer : Adobe PDF Library 9.0 Keywords : Page Layout : OneColumn Page Count : 3EXIF Metadata provided by EXIF.tools