MSDS_OrganicMechanicsPremiumBlendPottingSoilx 715935 MSDS
715935 Msds 715935_MSDS 715935_MSDS MSDS s sunlightsupply 3:
2017-04-29
: Pdf 715935 Msds 715935_MSDS product s
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
MATERIAL DATA SAFETY SHEET The Organic Mechanics Soil Company, LLC PO Box 272 Modena, PA 19358 For Health, Safety and Environmental Information call: 610.380.4598. Date of Preparation 11/01/06 MSDS # 100 Revision #3 SECTION I. IDENTIFICATION Retail Growing Mix & Soil Amendment Brand Name: Organic Mechanics® Premium Blend Potting Soil Form: granules Product Category: Landscaping/Yard >> Plant Care >> Potting Soil SECTION II. HAZARDOUS INGREDIENTS/IDENTITY INFORMATION Component: Nuisance particulates of variable composition Exposure Limits: OSHA PEL ACGIH TLV Respirable mass 5 mg/m3 5 mg/m3 Total mass l5 mg/m3 10 mg/m3 May Contain: Natural aggregates such as Perlite (CAS #9376370-3), coir, compost, bark, rice hulls, sand, and worm casting. SECTION III. PHYSICAL/CHEMICAL CHARACTERISTICS Appearance and Odor: Brown, fibrous, growing media, earthy odor Boiling Point: Not applicable Vapor Pressure: Not applicable Solubility in Water: Not applicable Specific Gravity (H20)=1): Bulk density of 0.29 g/cc Melting Point: Not applicable Evaporation Rate: Not applicable SECTION IV. FIRE AND EXPLOSION HAZARD DATA Flash Point: Not applicable Flammable Limits: Not applicable Extinguishing Media: Any Special Fire Fighting Procedures: None, Caution, burning may continue inside bags or piles after surface fire is out. Break bags or separate pile to assure that the fire is extinguished. The thermal decomposition products are those commonly observed with natural products such as wood or other vegetative matter. Unusual Fire and Explosion Hazards: None SECTION V. REACTIVITY DATA Stability: Stable Conditions to Avoid: None known Incompatibility: None known Hazardous Decomposition or byproducts: None known Hazardous Polymerization: Will not occur SECTION VI. HEALTH HAZARD DATA Routes of Entry: Inhalation, open wounds, eyes Health Hazards: Nuisance dust, contains Perlite (CAS #93763-70-3), coir, compost, bark, rice hulls, and worm casting. Carcinogenity: None known Effects of Exposure: Inhalation over long periods of high amounts of any nuisance dust may overload lung clearance mechanism, irritate mucous membranes and make lungs more vulnerable to respiratory disease. Emergency and First Aid Procedures: If inhaled, provide fresh air. If eye irritation occurs, flush with water. Keep open wounds covered and clean as suggested by any good program of hygiene. SECTION VII. PRECAUTIONS FOR SAFE HANDLING AND USE Steps to be taken in case material is released or spilled: Use methods to clean spill which avoid creating airborne dust. Remove for disposal or incorporation into soil or garden. Waste Disposal Method: According to EPA 40 CFR261.3, waste of this product is not defined as hazardous. Dispose of all waste in accordance with federal, state and local regulations. Precautions to be taken in handling and storing: If excessive dust is created avoid breathing dust by using adequate ventilation and/or using NIOSH or MSHA approved respirator for nuisance dust of this type. Breathing dust may be harmful to your health. Other Precautions: Protective eyewear should be worn where dust levels are high enough to cause irritation. SECTION VIII. CONTROL MEASURES Respiratory Protection: If dust is created use NIOSH or MSHA approved respirator for nuisance dust of this type. Ventilation: Local exhaust advisable if excessive dust is created. Protective Gloves: Not normally necessary but suggested in cases of open wounds that are not appropriately protected. Eye Protection: Protective eyewear should be worn where dust levels are high enough to cause irritation. Other Protective Clothing or Equipment: Normal work clothing Work/Hygienic Practices: NIOSH or MSHA approved respirator, eye protection and ventilation under conditions where excessive dust is created. Open wounds should be kept clean and suitably protected. SECTION IX. SUPPLEMENTAL INFORMATION These materials are made from natural products and may contain naturally occurring microorganisms. Proper precautions are advised to prevent infection of open wounds, inhalation of excessive amounts of dust and eye irritation. The proper hygiene practices necessary to prevent health hazards from any naturally occurring substance such as soil, bark, etc., should be observed. The information contained in this MSDS is provided without warranty of any kind, express or implied. The information contained herein is made available solely for consideration, investigation, and verification by the original recipients hereof. Users should consider this information as a supplement to other information gathered by or available to them. Users should make independent determinations of the suitability and completeness of information from all sources to assure proper use and disposal of these materials for the safety and health of employees, customers, and the environment. This hazard information is not a substitute for risk assessment under actual conditions of use. Users have the responsibility to keep currently informed on chemical hazard information, to design and update their own programs, and to comply with all applicable national, federal, state, and local laws and regulations regarding safety, occupational health, right to know, and environmental protection.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 3 Title : Microsoft Word - MSDS_OrganicMechanicsPremiumBlendPottingSoil.docx Author : Alisha Papenfuse Producer : Mac OS X 10.7.5 Quartz PDFContext Creator : Word Create Date : 2013:01:22 16:29:52Z Modify Date : 2013:01:22 16:29:52ZEXIF Metadata provided by EXIF.tools