Installation Directions

82769-Installationsheet 82769-InstallationSheet 82769-InstallationSheet 785235 Batch5 unilog cesco-content

134612-Installationsheet 134612-InstallationSheet 134612-InstallationSheet Batch9 unilog cesco-content

2014-10-17

: Pdf 82849-Installationsheet 82849-InstallationSheet Batch10 unilog

Open the PDF directly: View PDF PDF.
Page Count: 1

DownloadInstallation Directions
Open PDF In BrowserView PDF
IMPORTANT SAFETY INFORMATION. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. Follow label information
and instructions concerning Wet or Damp Locations, installation near combustible materials, insulation, building materials,
and proper lamping. Do not install in areas subject to combustible vapors or gases. Before wiring to power supply and
during servicing or relamping, turn off power at fuse or circuit breaker. All servicing or relamping must be performed by
qualified service personnel. Product must be grounded to avoid potential electric shock or other potential hazard.
Product must be mounted in locations and at heights and in a manner consistent with its intended use, and in
compliance with the National Electrical Code and local codes. The use of accessory equipment not recommended by
the manufacturer or installed contrary to instructions may cause an unsafe condition. Do not block light emanating from
product in whole or part, as this may cause an unsafe condition. Do not allow items such as drapes, curtains, screens or
the like to come into contact with the product or to block light from the product, as this may cause an unsafe condition.

INSTALLATION INSTRUCTIONS
TSC-30

(1)
HEX HEAD
SCREW

(1)

101 Corporate Drive • Spartanburg, SC 29303
With representatives offices in principal cities throughout North America.
Copyright 2005, 08/05 revision, All Rights Reserved - Printed in U.S.A.

TORSION SPRING 2
SUPPLIED WITH TRIM

Hours: 8am - 5pm ET

(2)

• Prescolite TollFree Technical Support 1.888.PRS.4TEC •

1.) ADJUST YOKE SO THAT LAMP IS PERPENDICULAR TO THE FLOOR WHEN THE
TRIM IS INSTALLED IN THE HOUSING.
2.) LOCK THE YOKE IN PLACE BY TIGHTENING THE HEX HEAD SCREW.
3.) ASSEMBLE THE SOCKET FROM THE LITEBOX HOUSING INTO THE MOUNTING
HOLE IN THE TOP OF THE YOKE.
4.) TO INSTALL THE TRIM INTO THE HOUSING, SQUEEZE THE TORSION SPRING
LEGS TOGETHER AND PLACE INTO THE TORSION SPRING BRACKETS IN THE
HOUSING. PUSH THE TRIM UP AND ALLOW THE SPRINGS TO PULL THE TRIM
UP AGAINST THE CEILING.
SOCKET
5.) INSTALL LAMP.
MOUNTING
HOLE
TO ROTATE TRIM 90° PULL
OUT TORSION LEGS (1)
THEN REINSTALL 90° BY
PULLING THROUGH LANCES
PROVIDED (2).
(2)

www.prescolite.com

InstructionSheet

Part No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .05832000
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 1
Creator                         : QuarkXPress(tm) 6.0
Create Date                     : 2005:08:08 13:57:40
X Press Private                 : %%DocumentProcessColors: Black.%%EndComments
Producer                        : QuarkXPress(tm) 6.0
EXIF Metadata provided by EXIF.tools

Navigation menu