Edwards Signaling

71083-Catalog 71083-Catalog 71083-Catalog Batch10 unilog cesco-content

2014-10-17

: Pdf 83985-Attachment 83985-Attachment Batch10 unilog

Open the PDF directly: View PDF .
Page Count: 60

[Close this document]
->Top<-
Introduction
Table of Contents
1 -- Hazardous Environments/Adverse Locations
2 -- Low-Profile Signals
3 -- Multi-Status Signals
4 -- Strobes
5 -- Rotating Lights
6 -- Flashing and Steady-On
7 -- Hazardous Location Definitions
8 -- Ordering Information

Visual Signal Solutions — You’ll Like What You See

We became the leader in visual signals by closely watching

customer and market needs. That’s how we developed the

leading product lineup in the world.

For 133 years, we’ve provided solutions like multi-colors

from a single lens, low prole signals, and multi-paks.

From general purpose beacons and strobes to Hazardous

Location products, we’ve got the right signal solution. With

a dierence you can see and performance you can trust.

Represented by:

www.edwardssignaling.com

41 W oodford A venue

Plainville, CT 06062

Phone: (800) 336-4206

Fax: (800) 454-2363

email: lit.request@edwardssignaling.com

8062/10m/6-06

See the Difference:

Visual Signals from the leader.

Before we develop a visual signal,

we look for input and advice – from

customers, engineers, industry

groups and our competitors’ products.

Armed with that valuable

information we can make

Edwards visual signals the

better choice for just about

any communications need

you have.

From the heavy-duty

performance of

hazardous-location

signals to the everyday

durability and reliability

of our commercial units,

all Edwards visual signals

perform. They are

bright, clear and

flexible, so you can alert, warn

and communicate throughout

your facility,campus or locale.

Visual communications

with your people

The appropriate visual signal can get

just about any message across.

From the low levels in automation

systems to emergency evacuation

and notification, we can keep your

people in the know. Whether workers

are concentrating on the job, day-

dreaming about the weekend, or

tuned out due to high noise levels,

aforceful Edwards visual signal can

tell them what they need to know.

Flexible communications

with your systems

Today there are more ways to

communicate with your signals

than ever before. RS 485, PLC,

hard wiring or wireless, Edwards has

the visual signals that fit in with the

way you’re already configured – we

can work however you do. And with

our MEDITMsignaling software, we

can even help you control your sig-

naling from your desktop or laptop.

So from managing routine signaling

to handling emergencies, you are

always in complete control.

More visual options

Beacons, strobes, flashing, steady-on and rotating

lights. Halogen, incandescent, LED or fluorescent.

Stacking, low-profile, round, triliptical, housed with

audible – no one gives you more visual signaling

choices than Edwards. With more lens choices,

colors, shapes, mounting options, and styles we’ve

got you covered.

All with Edwards quality,

durability and reliability

It just takes one look, one touch or one heft of an

Edwards visual signal to understand the difference.

They feel sturdier because they are. Our construction

is without peer,the materials top notch, and the fit and

finish carefully engineered to last a lifetime. Add in

the easy installation, mounting options and one-stop

support and it’seasy to understand why we are the

clear visual signaling leader.

Wesee what you need

Want to learn more about our visual signals? Or tell us

about your special needs? Call 800-336-4206 or visit

www.edwardssignaling.com. We’ve got an entire company

committed to looking for better ways. And making visual

signaling clearer and more useful every day.

Table of Contents

7Hazardous Location

Definitions PAGES 50-51

8Ordering Information

PAGES 52-59

6Flashing and Steady-on

PAGES 42-49

1Hazardous & Adverse

Location Signals

PAGES 4-13

2Low-Profile Signals

PAGES 14-19

3Multi-Status Signals

PAGES 20-25

5Rotating Lights

PAGES 38-41

4Strobes

PAGES 26-37

How to make better

visual signals? Watch.

2 3

Before we develop a visual signal,

we look for input and advice – from

customers, engineers, industry

groups and our competitors’ products.

Armed with that valuable

information we can make

Edwards visual signals the

better choice for just about

any communications need

you have.

From the heavy-duty

performance of

hazardous-location

signals to the everyday

durability and reliability

of our commercial units,

all Edwards visual signals

perform. They are

bright, clear and

flexible, so you can alert, warn

and communicate throughout

your facility,campus or locale.

Visual communications

with your people

The appropriate visual signal can get

just about any message across.

From the low levels in automation

systems to emergency evacuation

and notification, we can keep your

people in the know. Whether workers

are concentrating on the job, day-

dreaming about the weekend, or

tuned out due to high noise levels,

aforceful Edwards visual signal can

tell them what they need to know.

Flexible communications

with your systems

Today there are more ways to

communicate with your signals

than ever before. RS 485, PLC,

hard wiring or wireless, Edwards has

the visual signals that fit in with the

way you’re already configured – we

can work however you do. And with

our MEDITMsignaling software, we

can even help you control your sig-

naling from your desktop or laptop.

So from managing routine signaling

to handling emergencies, you are

always in complete control.

More visual options

Beacons, strobes, flashing, steady-on and rotating

lights. Halogen, incandescent, LED or fluorescent.

Stacking, low-profile, round, triliptical, housed with

audible – no one gives you more visual signaling

choices than Edwards. With more lens choices,

colors, shapes, mounting options, and styles we’ve

got you covered.

All with Edwards quality,

durability and reliability

It just takes one look, one touch or one heft of an

Edwards visual signal to understand the difference.

They feel sturdier because they are. Our construction

is without peer,the materials top notch, and the fit and

finish carefully engineered to last a lifetime. Add in

the easy installation, mounting options and one-stop

support and it’seasy to understand why we are the

clear visual signaling leader.

Wesee what you need

Want to learn more about our visual signals? Or tell us

about your special needs? Call 800-336-4206 or visit

www.edwardssignaling.com. We’ve got an entire company

committed to looking for better ways. And making visual

signaling clearer and more useful every day.

Table of Contents

7Hazardous Location

Definitions PAGES 50-51

8Ordering Information

PAGES 52-59

6Flashing and Steady-on

PAGES 42-49

1Hazardous & Adverse

Location Signals

PAGES 4-13

2Low-Profile Signals

PAGES 14-19

3Multi-Status Signals

PAGES 20-25

5Rotating Lights

PAGES 38-41

4Strobes

PAGES 26-37

How to make better

visual signals? Watch.

2 3

Hazardous & Adverse Location Signals

AdaptaBeacon®Explosionproof Rotating Lights

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X, Marine UL Cat. UXUB and 1598A Listed

Tech Info:

Electrical Rating: 24-28V DC, 0.8 Amps

Peak Candlepower: 2,838 cd

Rotations per minute: 75

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

Explosionproof AdaptaBeacon rotating lights are engineered

for Class I, Div. 1 and Div. 2 locations. Diode polarized

for supervised circuits, these factory sealed signals deliver

high visual output with low maintenance. The long-life

20W halogen bulb is protected by a high impact glass

dome and dome guard. Quick-connect technology

makes mounting easy and fast. Gaskets seal out dirt

and moisture and an epoxy powder coating resists

corrosion. (Pendant mount shown)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T3 (200°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T3 (200°C) T6 (85°C) T4 (135°C) T4 (135°C)

65°C 105°C T2D (215°C) T6 (85°C) T4 (135°C) T4 (135°C)

Class I, Div. 1&2, Diode Polarized,

Marine Rated

116DEXMRINH*-GW Series

(* Letter in the

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta)

AdaptaBeacon®Explosionproof Rotating Lights

Class I, Div. 1&2

Marine Rated

116EXMRINH*-N5 Series

(* Letter in the

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T1 (450°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T1 (450°C) T5 (100°C) T4 (135°C) T4 (135°C)

65°C105°CT1 (450°C) T5 (100°C) T4 (135°C) T4 (135°C)

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X, Marine UL Cat. UXUB and 1598A Listed

Tech Info:

Electrical Rating: 120V 50/60 Hz, 0.42 Amps

Peak Candlepower: 3,328 cd

Rotations per minute: 75

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

With its 40W halogen bulb, AdaptaBeacon marine rated

explosionproof rotating lights are versatile performers in

Class I, Div. 1 and Div. 2 locations. The factory sealed

signals offer high visual output with low maintenance.

The lamps are protected by a high impact glass dome

and dome guard. Gaskets seal out dirt and moisture

and an epoxy powder coating resists corrosion. Quick-

connect technology makes mounting easy and fast.

(Stanchion mount shown)

Hazardous Environments/

Adverse Locations

Nowhere is safety more important than

in hazardous locations. That’s why your

safe choice is Edwards. We developed

the signaling that delivers safety — both

in clear, understandable communica-

tions and in engineering.

With more explosionproof, code-

compliant choices, we communicate

safely and clearly in your most danger-

ous and confusing locations.

For Hazardous Environments/

Adverse Locations Ordering Info See Pages 56-59

Hazardous & Adverse Location Signals

AdaptaBeacon®Explosionproof Rotating Lights

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X, Marine UL Cat. UXUB and 1598A Listed

Tech Info:

Electrical Rating: 24-28V DC, 0.8 Amps

Peak Candlepower: 2,838 cd

Rotations per minute: 75

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

Explosionproof AdaptaBeacon rotating lights are engineered

for Class I, Div. 1 and Div. 2 locations. Diode polarized

for supervised circuits, these factory sealed signals deliver

high visual output with low maintenance. The long-life

20W halogen bulb is protected by a high impact glass

dome and dome guard. Quick-connect technology

makes mounting easy and fast. Gaskets seal out dirt

and moisture and an epoxy powder coating resists

corrosion. (Pendant mount shown)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T3 (200°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T3 (200°C) T6 (85°C) T4 (135°C) T4 (135°C)

65°C 105°C T2D (215°C) T6 (85°C) T4 (135°C) T4 (135°C)

Class I, Div. 1&2, Diode Polarized,

Marine Rated

116DEXMRINH*-GW Series

(* Letter in the

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta)

AdaptaBeacon®Explosionproof Rotating Lights

Class I, Div. 1&2

Marine Rated

116EXMRINH*-N5 Series

(* Letter in the

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T1 (450°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T1 (450°C) T5 (100°C) T4 (135°C) T4 (135°C)

65°C105°CT1 (450°C) T5 (100°C) T4 (135°C) T4 (135°C)

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X, Marine UL Cat. UXUB and 1598A Listed

Tech Info:

Electrical Rating: 120V 50/60 Hz, 0.42 Amps

Peak Candlepower: 3,328 cd

Rotations per minute: 75

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

With its 40W halogen bulb, AdaptaBeacon marine rated

explosionproof rotating lights are versatile performers in

Class I, Div. 1 and Div. 2 locations. The factory sealed

signals offer high visual output with low maintenance.

The lamps are protected by a high impact glass dome

and dome guard. Gaskets seal out dirt and moisture

and an epoxy powder coating resists corrosion. Quick-

connect technology makes mounting easy and fast.

(Stanchion mount shown)

Hazardous Environments/

Adverse Locations

Nowhere is safety more important than

in hazardous locations. That’s why your

safe choice is Edwards. We developed

the signaling that delivers safety — both

in clear, understandable communica-

tions and in engineering.

With more explosionproof, code-

compliant choices, we communicate

safely and clearly in your most danger-

ous and confusing locations.

For Hazardous Environments/

Adverse Locations Ordering Info See Pages 56-59

Hazardous & Adverse Location Signals

AdaptaBeacon®UL 1971 Fire Alarm Explosionproof Strobe

Class I, Div. 1&2, Diode Polarized

116DEXSTC-FJ

Clear only

AdaptaBeacon®Marine Rated Explosionproof Strobe

Class I, Div. 1&2, Diode Polarized

116DEXMST*-FJ Series

(* Letter in this

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta, C-clear)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T2D (215°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T2C (230°C) T6 (85°C) T4 (135°C) T4 (135°C)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T2D (215°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T2C (230°C) T6 (85°C) T4 (135°C) T4 (135°C)

Approvals: UL 1971 Listed for indoor visual signaling for

the hearing impaired in non-sleeping areas, UL 1638 Listed,

Type 3R, Type 4X

Tech Info:

Electrical Rating: 24V DC, 0.774 – 1.14 Amps

UL 1971 Light Output Rating: 60 cd

Flashes per minute: 65

Mounts on: pendant, wall, and ceiling (Brackets purchased

separately)

AdaptaBeacon Explosionproof strobes deliver UL 1971 per-

formance in Class I, Div. 1 and Div. 2 locations. Factory sealed,

these diode polarized signals deliver high output with low

maintenance for fire alarms and other supervised circuits.

The strobe tube is protected by a high impact glass dome

and guard. Gaskets seal out dirt and moisture and an epoxy

powder coating resists corrosion. Quick-connect technology

makes mounting easy and fast. (Pendant mount shown)

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X, Marine UL Cat. UXUB and 1598A Listed

Tech Info:

Electrical Rating: 16-33V DC, 0.774Amps

Peak Candlepower: 800,000 cd

Flashes per minute: 65

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

AdaptaBeacon marine rated Explosionproof strobes deliver

versatile performance in Class I, Div. 1 and Div. 2 locations.

Factory sealed, these diode polarized signals deliver high

visual output with low maintenance for applications

requiring electrical supervision. The strobe tube is protected

by a high impact glass dome and dome guard. Gaskets seal

out dirt and moisture and an epoxy powder coating resists

corrosion. Quick-connect technology makes mounting easy

and fast. (Wall mount shown)

AdaptaBeacon®Explosionproof Steady-On Lights

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X, Marine UL Cat. UXUB and 1598A Listed

Tech Info:

Electrical Rating: 120V 50/60 Hz, 0.1Amps

Peak Candlepower: 3,328 cd

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

AdaptaBeacon marine rated Explosionproof rotating lights

are versatile performers in Class I, Div. 1 and Div. 2 locations.

40W halogen bulb. The factory sealed signals offer high

visual output with low maintenance. The lamps are

protected by a high impact glass dome and dome guard.

Gaskets seal out dirt and moisture and an epoxy powder

coating resists corrosion. Quick-connect technology makes

mounting easy and fast. (Ceiling mount shown)

Class I, Div. 1&2

116EXMSIN*-N5 Series

(* Letter in this

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta,

C-clear)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T1 (450°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T1 (450°C) T5 (100°C) T4 (135°C) T4 (135°C)

65°C 105°C T1 (450°C) T5 (100°C) T4 (135°C) T4 (135°C)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T3 (200°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T3 (200°C) T6 (85°C) T4 (135°C) T4 (135°C)

65°C 105°C T2D (215°C) T6 (85°C) T4 (135°C) T4 (135°C)

AdaptaBeacon®Explosionproof Steady-On Lights

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X, Marine UL Cat. UXUB and 1598A Listed

Tech Info:

Electrical Rating: 24-28V DC, 0.8 Amps

Peak Candlepower: 2,838 cd

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

Explosionproof AdaptaBeacon steady-on lights perform

in Class I, Div. 1 and Div. 2 locations. Factory sealed, these

diode polarized signals deliver high visual output with

low maintenance in supervised circuits. The long-life

20W halogen bulb is protected by a high impact glass

dome and dome guard. Gaskets seal out dirt and

moisture and an epoxy powder coating resists corrosion.

Quick-connect technology makes mounting easy and

fast. (Pendant mount shown)

Class I, Div. 1&2, Diode Polarized

Marine Rated

116DEXMSINH*-GW Series

(* Letter in this

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta,

C-clear)

Hazardous & Adverse Location Signals

AdaptaBeacon®UL 1971 Fire Alarm Explosionproof Strobe

Class I, Div. 1&2, Diode Polarized

116DEXSTC-FJ

Clear only

AdaptaBeacon®Marine Rated Explosionproof Strobe

Class I, Div. 1&2, Diode Polarized

116DEXMST*-FJ Series

(* Letter in this

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta, C-clear)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T2D (215°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T2C (230°C) T6 (85°C) T4 (135°C) T4 (135°C)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T2D (215°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T2C (230°C) T6 (85°C) T4 (135°C) T4 (135°C)

Approvals: UL 1971 Listed for indoor visual signaling for

the hearing impaired in non-sleeping areas, UL 1638 Listed,

Type 3R, Type 4X

Tech Info:

Electrical Rating: 24V DC, 0.774 – 1.14 Amps

UL 1971 Light Output Rating: 60 cd

Flashes per minute: 65

Mounts on: pendant, wall, and ceiling (Brackets purchased

separately)

AdaptaBeacon Explosionproof strobes deliver UL 1971 per-

formance in Class I, Div. 1 and Div. 2 locations. Factory sealed,

these diode polarized signals deliver high output with low

maintenance for fire alarms and other supervised circuits.

The strobe tube is protected by a high impact glass dome

and guard. Gaskets seal out dirt and moisture and an epoxy

powder coating resists corrosion. Quick-connect technology

makes mounting easy and fast. (Pendant mount shown)

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X, Marine UL Cat. UXUB and 1598A Listed

Tech Info:

Electrical Rating: 16-33V DC, 0.774Amps

Peak Candlepower: 800,000 cd

Flashes per minute: 65

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

AdaptaBeacon marine rated Explosionproof strobes deliver

versatile performance in Class I, Div. 1 and Div. 2 locations.

Factory sealed, these diode polarized signals deliver high

visual output with low maintenance for applications

requiring electrical supervision. The strobe tube is protected

by a high impact glass dome and dome guard. Gaskets seal

out dirt and moisture and an epoxy powder coating resists

corrosion. Quick-connect technology makes mounting easy

and fast. (Wall mount shown)

AdaptaBeacon®Explosionproof Steady-On Lights

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X, Marine UL Cat. UXUB and 1598A Listed

Tech Info:

Electrical Rating: 120V 50/60 Hz, 0.1Amps

Peak Candlepower: 3,328 cd

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

AdaptaBeacon marine rated Explosionproof rotating lights

are versatile performers in Class I, Div. 1 and Div. 2 locations.

40W halogen bulb. The factory sealed signals offer high

visual output with low maintenance. The lamps are

protected by a high impact glass dome and dome guard.

Gaskets seal out dirt and moisture and an epoxy powder

coating resists corrosion. Quick-connect technology makes

mounting easy and fast. (Ceiling mount shown)

Class I, Div. 1&2

116EXMSIN*-N5 Series

(* Letter in this

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta,

C-clear)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T1 (450°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T1 (450°C) T5 (100°C) T4 (135°C) T4 (135°C)

65°C 105°C T1 (450°C) T5 (100°C) T4 (135°C) T4 (135°C)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T3 (200°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T3 (200°C) T6 (85°C) T4 (135°C) T4 (135°C)

65°C 105°C T2D (215°C) T6 (85°C) T4 (135°C) T4 (135°C)

AdaptaBeacon®Explosionproof Steady-On Lights

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X, Marine UL Cat. UXUB and 1598A Listed

Tech Info:

Electrical Rating: 24-28V DC, 0.8 Amps

Peak Candlepower: 2,838 cd

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

Explosionproof AdaptaBeacon steady-on lights perform

in Class I, Div. 1 and Div. 2 locations. Factory sealed, these

diode polarized signals deliver high visual output with

low maintenance in supervised circuits. The long-life

20W halogen bulb is protected by a high impact glass

dome and dome guard. Gaskets seal out dirt and

moisture and an epoxy powder coating resists corrosion.

Quick-connect technology makes mounting easy and

fast. (Pendant mount shown)

Class I, Div. 1&2, Diode Polarized

Marine Rated

116DEXMSINH*-GW Series

(* Letter in this

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta,

C-clear)

Hazardous & Adverse Location Signals

AdaptaBeacon®Explosionproof Strobes

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X

Tech Info:

Electrical Rating: 12-48V DC, 0.38–1.2 Amps

Peak Candlepower: 800,000 cd

Flashes per Minute: 65

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

AdaptaBeacon explosionproof strobes make Class I, Div. 1

and Div. 2 location signaling easy and effective. The factory

sealed signals offer high visual output with low maintenance.

The strobe is protected by a high impact glass dome and

dome guard. Gaskets seal out dirt and moisture and an

epoxy powder coating resists corrosion. Quick-connect

technology makes mounting easy and fast.

(Wall mount shown)

Class I, Div. 1&2

116EXST*-EK Series

(* Letter in this

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta)

AdaptaBeacon®Marine Rated Explosionproof Strobes

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X, Marine UL Cat. UXUB and 1598A Listed

Tech Info:

Electrical Rating: 120V 50/60 Hz, 0.1 Amps

Peak Candlepower: 800,000 cd

Flashes per Minute: 65

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

AdaptaBeacon explosionproof strobes make Class I, Div. 1

and Div. 2 location signaling easy and effective. These

marine rated, factory sealed signals offer high visual

output with low maintenance. The strobe is protected

by a high impact glass dome and dome guard. Gaskets

seal out dirt and moisture and an epoxy powder coating

resists corrosion. Quick-connect technology makes

mounting easy and fast. (Wall mount shown)

Class I, Div. 1&2

116EXMST*-N5 Series

(* Letter in this

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T3 (200°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T3 (200°C) T6 (85°C) T4 (135°C) T4 (135°C)

65°C 105°C T2D (215°C) T6 (85°C) T4 (135°C) T4 (135°C)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T4 (135°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T3C (160°C) T6 (85°C) T4 (135°C) T4 (135°C)

65°C 105°C T3C (160°C) T6 (85°C) T4 (135°C) T4 (135°C)

Genesis®UL 1971 Fire Alarm Explosionproof Strobe

Approvals: UL 1971 Listed for indoor visual signaling for

the hearing impaired in non-sleeping areas, Type 3R, Type 4X,

UL 1638 Listed

Tech Info:

Electrical Rating: 16–33V DC, .325 Amps

Wall 60 cd, Ceiling 120 cd

Flashes per Minute: 65

Mounts on: pendant, wall, and ceiling

(Mounting brackets purchased separately)

Genesis explosionproof strobes provide highly controllable

visual signaling in Class I, Div. 1 and Div. 2 locations. Diode

polarized for use in electronically supervised circuits, Genesis

strobes can also be synchronized to within 10 milliseconds

of each other with just one optional synchronization

module per circuit. These factory sealed signals offer high

visual output with low maintenance. The strobe is protected

by a high impact glass dome and dome guard. Gaskets seal

out dirt and moisture and an epoxy powder coating resists

corrosion. Quick-connect technology makes mounting easy

and fast. (Pendant mount shown)

Hazardous Location Listings

Operating

Class Division Group Ambient Temp Temperature Code

I 1 C,D 104°F (40°C) T6 (85°C, 185°F)

131°F (55°C) T6 (85°C, 185°F)

149°F (65°C) T6 (85°C, 185°F)

I 2 A,B,C,D 104°F (40°C) T2B (260°C, 500°F)

131°F (55°C) T2A (280°C, 536°F)

149°F (65°C) T2A (280°C, 536°F)

II 1 E,F,G 104°F (40°C) T4A (120°C, 248°F)

131°F (55°C) T4 (135°C, 275°F)

149°F (65°C) T4 (135°C, 275°F)

III 1 & 2 104°F (40°C) T4A (120°C, 248°F)

131°F (55°C) T4 (135°C, 275°F)

149°F (65°C) T4 (135°C, 275°F)

Class I, Div. 1&2

116DEGEX-FJ

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T2D (215°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T2C (230°C) T6 (85°C) T4 (135°C) T4 (135°C)

Hazardous & Adverse Location Signals

AdaptaBeacon®Explosionproof Strobes

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X

Tech Info:

Electrical Rating: 12-48V DC, 0.38–1.2 Amps

Peak Candlepower: 800,000 cd

Flashes per Minute: 65

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

AdaptaBeacon explosionproof strobes make Class I, Div. 1

and Div. 2 location signaling easy and effective. The factory

sealed signals offer high visual output with low maintenance.

The strobe is protected by a high impact glass dome and

dome guard. Gaskets seal out dirt and moisture and an

epoxy powder coating resists corrosion. Quick-connect

technology makes mounting easy and fast.

(Wall mount shown)

Class I, Div. 1&2

116EXST*-EK Series

(* Letter in this

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta)

AdaptaBeacon®Marine Rated Explosionproof Strobes

Approvals: UL 1638 and 1203 Listed, cUL Listed Type 3R,

Type 4X, Marine UL Cat. UXUB and 1598A Listed

Tech Info:

Electrical Rating: 120V 50/60 Hz, 0.1 Amps

Peak Candlepower: 800,000 cd

Flashes per Minute: 65

Mounts on: pendant, wall, ceiling, and stanchion

(Mounting brackets purchased separately)

AdaptaBeacon explosionproof strobes make Class I, Div. 1

and Div. 2 location signaling easy and effective. These

marine rated, factory sealed signals offer high visual

output with low maintenance. The strobe is protected

by a high impact glass dome and dome guard. Gaskets

seal out dirt and moisture and an epoxy powder coating

resists corrosion. Quick-connect technology makes

mounting easy and fast. (Wall mount shown)

Class I, Div. 1&2

116EXMST*-N5 Series

(* Letter in this

location indicates

lens color:

A-amber, B-blue,

G-green, R-red,

M-magenta)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T3 (200°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T3 (200°C) T6 (85°C) T4 (135°C) T4 (135°C)

65°C 105°C T2D (215°C) T6 (85°C) T4 (135°C) T4 (135°C)

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T4 (135°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T3C (160°C) T6 (85°C) T4 (135°C) T4 (135°C)

65°C 105°C T3C (160°C) T6 (85°C) T4 (135°C) T4 (135°C)

Genesis®UL 1971 Fire Alarm Explosionproof Strobe

Approvals: UL 1971 Listed for indoor visual signaling for

the hearing impaired in non-sleeping areas, Type 3R, Type 4X,

UL 1638 Listed

Tech Info:

Electrical Rating: 16–33V DC, .325 Amps

Wall 60 cd, Ceiling 120 cd

Flashes per Minute: 65

Mounts on: pendant, wall, and ceiling

(Mounting brackets purchased separately)

Genesis explosionproof strobes provide highly controllable

visual signaling in Class I, Div. 1 and Div. 2 locations. Diode

polarized for use in electronically supervised circuits, Genesis

strobes can also be synchronized to within 10 milliseconds

of each other with just one optional synchronization

module per circuit. These factory sealed signals offer high

visual output with low maintenance. The strobe is protected

by a high impact glass dome and dome guard. Gaskets seal

out dirt and moisture and an epoxy powder coating resists

corrosion. Quick-connect technology makes mounting easy

and fast. (Pendant mount shown)

Hazardous Location Listings

Operating

Class Division Group Ambient Temp Temperature Code

I 1 C,D 104°F (40°C) T6 (85°C, 185°F)

131°F (55°C) T6 (85°C, 185°F)

149°F (65°C) T6 (85°C, 185°F)

I 2 A,B,C,D 104°F (40°C) T2B (260°C, 500°F)

131°F (55°C) T2A (280°C, 536°F)

149°F (65°C) T2A (280°C, 536°F)

II 1 E,F,G 104°F (40°C) T4A (120°C, 248°F)

131°F (55°C) T4 (135°C, 275°F)

149°F (65°C) T4 (135°C, 275°F)

III 1 & 2 104°F (40°C) T4A (120°C, 248°F)

131°F (55°C) T4 (135°C, 275°F)

149°F (65°C) T4 (135°C, 275°F)

Class I, Div. 1&2

116DEGEX-FJ

Hazardous Location Listings Operating Temperature

Ambient Supply Wire Class I, Div. 2 Class I, Div. 1 & 2 Class II & III, Div. 1 Class II & III, Div. 2

Temp Temp Marking Groups A, B Groups C, D Groups E, F, G Group G

40°C 75°C T2D (215°C) T6 (85°C) T4A (120°C) T4A (120°C)

55°C 90°C T2C (230°C) T6 (85°C) T4 (135°C) T4 (135°C)

Hazardous & Adverse Location Signals

1110

Type 4X Compaxx®Low Profile Strobe

Approvals: Type 4X, cUL Listed

Tech Info:

Electrical Rating: 10-110V DC, 0.47 Amps or 120V AC,

0.1 Amps or 240V AC, 0.05 Amps

Max Candlepower: 175,000 cd

Flash Rate: 65 fpm

Mounts on: surface mounting

Compaxx 117 Series strobes deliver bright, clear

signals through a shatter resistant polycarbonate fresnel

lens. Rugged Type 4X enclosure makes them ideal for

industrial washdown applications as well as for use on

tow motors and other vehicles.

Type 4X, Weatherproof

117 Series

AdaptaBeacon®Division 2 Adverse Location Signals

Approvals: UL 1638 and 1604 Listed, Type 4X, cUL Listed,

Marine UL 595 Listed – Category UXUB, Marine UL 1598A

Listed, UL 1971 Listed

Tech Info:

Mounts on: surface (with 105BX attachment), wall (with

105BM and 105BX attachments), and 3/4" conduit (with

105PM attachment)

The heavy duty 105 Series are corrosion-resistant

beacons for industrial applications. They feature glass-

reinforced thermoplastic polyester resin bases, brass

hardware and polycarbonate double fresnel lenses. The

105DHISTC-FJ high intensity strobe is compatible with

supervised fire alarm systems. Available in Steady-On

LED and incandescent, flashing LED and incandescent,

and strobe.

Div. 2, Marine Rated

105 Series

Specifications

Module Lamp Peak Replacement

Cat. No. Type Ratings Candlepower Voltage Current Lamp

105SLED*-G1 Steady-On LED 120,000 hours1,2 Color Dependent 24V DC 0.062A —

105SLED*-N5 Steady-On LED 120,000 hours1,2 Color Dependent 120V AC 0.022A

105FLED*-G1 Flashing LED 100,000 hours1,2 Color Dependent 24V DC 0.062A —

105FLED*-N5 Flashing LED 100,000 hours1,2 Color Dependent 120V AC 0.022A

105SINH**-G1 Steady-On Halogen 20W, 20,000 hours1,2 2839 24V DC 0.8A 50LMP-20WH or Ind. Trade

105SINH**-G5 Steady-On Halogen 20W, 20,000 hours1,2 2839 24V AC 0.8A No. 1692 (Incandescent)

105SINH**-N5 Steady-On Halogen 25W, 20,000 hours1,2 2198 120V AC 0.2A 50LMP-25WH or Ind. Trade

No. 25T8DC (Incandescent)

105FINH**-G1 Flashing Halogen 20W, 20,000 hours1,2 2839 24V DC 0.8A 50LMP-20WH or Ind. Trade

105FINH**-G5 Flashing Halogen 20W, 20,000 hours1,2 2839 24V AC 0.8A No. 1692 (Incandescent)

105FINH**-N5 Flashing Halogen 25W, 20,000 hours1,2 2198 120V AC 0.2A 50LMP-25WH or Ind. Trade

No. 25T8DC (Incandescent)

105ST**-G1 3 Joule Strobe 3,000 hours3300,000 24V DC 0.3A 91B-ST

105ST**-N5 3 Joule Strobe 3,000 hours3300,000 120V AC 0.1A

105ST**-R5 3 Joule Strobe 3,000 hours3300,000 240V AC 0.02A

105DHISTC-FJ Fire Alarm (UL 1971) 3,000 hours326 cd wall (dome out) 20-30V DC 1.08-0.83 A 92-ST

8 Joule Strobe 24 cd wall (dome down)

26 cd ceiling

105DHIST***-FJ High Intensity 3,000 hours3800,000 20-30V DC 1.08-0.83 A 92-ST

8 Joule Strobe

105HIST**-N5 High Intensity 3,000 hours3800,000 120V AC 0.1A 92-ST

8 Joule Strobe

105HIST**-R5 High Intensity 3,000 hours3800,000 240V AC 0.05A 92-ST

8 Joule Strobe

105HIST**-EK High Intensity 3,000 hours3800,000 12-48V DC 0.05A 92-ST

8 Joule Strobe

* Lens and light source (LED) color: A - amber, B - blue, G - green, R - red.

** Lens color: A - amber,B - blue,C - clear, G - green, M - magenta, R - red.

*** Lens color: A - amber, B - blue, G - green, M - magenta, R - red.

1At nominal operating voltage.

2Projected lamp life based on manufacturer's calculated lamp life @ 65 fpm and 50% duty cycle.

3 Strobe tube life @ operating power to 75% efficiency.

Hazardous & Adverse Location Signals

1110

Type 4X Compaxx®Low Profile Strobe

Approvals: Type 4X, cUL Listed

Tech Info:

Electrical Rating: 10-110V DC, 0.47 Amps or 120V AC,

0.1 Amps or 240V AC, 0.05 Amps

Max Candlepower: 175,000 cd

Flash Rate: 65 fpm

Mounts on: surface mounting

Compaxx 117 Series strobes deliver bright, clear

signals through a shatter resistant polycarbonate fresnel

lens. Rugged Type 4X enclosure makes them ideal for

industrial washdown applications as well as for use on

tow motors and other vehicles.

Type 4X, Weatherproof

117 Series

AdaptaBeacon®Division 2 Adverse Location Signals

Approvals: UL 1638 and 1604 Listed, Type 4X, cUL Listed,

Marine UL 595 Listed – Category UXUB, Marine UL 1598A

Listed, UL 1971 Listed

Tech Info:

Mounts on: surface (with 105BX attachment), wall (with

105BM and 105BX attachments), and 3/4" conduit (with

105PM attachment)

The heavy duty 105 Series are corrosion-resistant

beacons for industrial applications. They feature glass-

reinforced thermoplastic polyester resin bases, brass

hardware and polycarbonate double fresnel lenses. The

105DHISTC-FJ high intensity strobe is compatible with

supervised fire alarm systems. Available in Steady-On

LED and incandescent, flashing LED and incandescent,

and strobe.

Div. 2, Marine Rated

105 Series

Specifications

Module Lamp Peak Replacement

Cat. No. Type Ratings Candlepower Voltage Current Lamp

105SLED*-G1 Steady-On LED 120,000 hours1,2 Color Dependent 24V DC 0.062A —

105SLED*-N5 Steady-On LED 120,000 hours1,2 Color Dependent 120V AC 0.022A

105FLED*-G1 Flashing LED 100,000 hours1,2 Color Dependent 24V DC 0.062A —

105FLED*-N5 Flashing LED 100,000 hours1,2 Color Dependent 120V AC 0.022A

105SINH**-G1 Steady-On Halogen 20W, 20,000 hours1,2 2839 24V DC 0.8A 50LMP-20WH or Ind. Trade

105SINH**-G5 Steady-On Halogen 20W, 20,000 hours1,2 2839 24V AC 0.8A No. 1692 (Incandescent)

105SINH**-N5 Steady-On Halogen 25W, 20,000 hours1,2 2198 120V AC 0.2A 50LMP-25WH or Ind. Trade

No. 25T8DC (Incandescent)

105FINH**-G1 Flashing Halogen 20W, 20,000 hours1,2 2839 24V DC 0.8A 50LMP-20WH or Ind. Trade

105FINH**-G5 Flashing Halogen 20W, 20,000 hours1,2 2839 24V AC 0.8A No. 1692 (Incandescent)

105FINH**-N5 Flashing Halogen 25W, 20,000 hours1,2 2198 120V AC 0.2A 50LMP-25WH or Ind. Trade

No. 25T8DC (Incandescent)

105ST**-G1 3 Joule Strobe 3,000 hours3300,000 24V DC 0.3A 91B-ST

105ST**-N5 3 Joule Strobe 3,000 hours3300,000 120V AC 0.1A

105ST**-R5 3 Joule Strobe 3,000 hours3300,000 240V AC 0.02A

105DHISTC-FJ Fire Alarm (UL 1971) 3,000 hours326 cd wall (dome out) 20-30V DC 1.08-0.83 A 92-ST

8 Joule Strobe 24 cd wall (dome down)

26 cd ceiling

105DHIST***-FJ High Intensity 3,000 hours3800,000 20-30V DC 1.08-0.83 A 92-ST

8 Joule Strobe

105HIST**-N5 High Intensity 3,000 hours3800,000 120V AC 0.1A 92-ST

8 Joule Strobe

105HIST**-R5 High Intensity 3,000 hours3800,000 240V AC 0.05A 92-ST

8 Joule Strobe

105HIST**-EK High Intensity 3,000 hours3800,000 12-48V DC 0.05A 92-ST

8 Joule Strobe

* Lens and light source (LED) color: A - amber, B - blue, G - green, R - red.

** Lens color: A - amber,B - blue,C - clear, G - green, M - magenta, R - red.

*** Lens color: A - amber, B - blue, G - green, M - magenta, R - red.

1At nominal operating voltage.

2Projected lamp life based on manufacturer's calculated lamp life @ 65 fpm and 50% duty cycle.

3 Strobe tube life @ operating power to 75% efficiency.

12 13

Hazardous & Adverse Location Signals

AdaptaBeacon®Division 2 Diode Polarized Strobe

Approvals: UL 1638 and 1604 Listed, Type 3R, Type 4X,

cUL Listed, UL Listed

Tech Info:

Electrical Rating: 24V DC, 1.4 Amps

Peak Candlepower: 800,000 cd

Flash Rate: 65 fpm

Mounts on: bracket, ceiling or pendant

These diode polarized 107 Series AdaptaBeacon

strobes are designed for high visual output and

low maintenance in Division 2 electrically supervised

applications. The high impact glass dome and optional

dome guard deliver clarity and safety. Models are

available for bracket, ceiling or pendant mounting.

Class I, Div. 2, Diode Polarized

107DDV2(*)ST-G1 Series

* Insert B for bracket, C for ceiling, or P

for pendant mount.

Hazardous Location Listings

Operating

Class Division Group Ambient Temp Temperature Code

I 2 A,B,C,D 104°F (40°C) T2 (300°C, 572°F)

131°F (55°C) T1 (450°C, 842°F)

149°F (65°C) T1 (450°C, 842°F)

II* 1 and 2* 104°F (40°C) T4A (120°C, 248°F)

III* 1 and 2* 131°F (55°C) T4 (135°C, 275°F)

149°F (65°C) T3C (160°C, 320°F)

* Pendant mount models only.Pendant mount models are also listed for use in Class II, Division 1, Groups E, F, and G, Class II, Division 2, Groups F and G, and Class III, Division 1 and 2 hazardous locations.

AdaptaBeacon®Division 2 Marine Rated Rotating Lights

Approvals: UL 1638 and 1604 Listed, Type 3R, Type 4X, cUL

Listed, Marine UL 595 UXUB Listed, Marine UL 1598A Listed

Tech Info:

Electrical Rating: 120V 50/60 Hz, 0.35 Amps or 240V

50/60 Hz, 0.1 Amps

Peak Candlepower: 3,328 cd @120V, 2914 cd @240V

Rotations per Minute: 75

Mounts on: bracket, ceiling or pendant

The marine-rated 107 Series AdaptaBeacon rotating

lights deliver high visual output and low maintenance in

a solid Division 2 package. The high impact glass dome

and optional dome guard deliver clarity and safety.

Models are available for bracket, ceiling or pendant

mounting.

Class I, Div. 2

107DV2(*)-RINH Series

* Insert B for bracket, C for ceiling or P

for pendant mount.

Hazardous Location Listings

Operating

Class Division Group Ambient Temp Temperature Code

I 2 A,B,C,D 104°F (40°C) (460°C, 860°F)

131°F (55°C) (475°C, 887°F)

149°F (65°C) (485°C, 905°F)

II* 1 and 2* 104°F (40°C) T4A (120°C, 248°F)

III* 1 and 2* 131°F (55°C) T4 (135°C, 275°F)

149°F (65°C) T3C (160°C, 320°F)

* Pendant mount models only. Pendant mount models are also listed for use in Class II, Division 1, Groups E, F, and G, Class II, Division 2, Groups F and G and Class III, Division 1 and 2 hazardous locations.

AdaptaBeacon®Division 2 Fluorescent Lights

Approvals: UL 1570 and 844 Listed, Type 3R, CSA C22.2

No. 137 Certified

Tech Info:

Electrical Rating: 120V 60 Hz

Peak Candlepower: 800,000 cd

Mounts on: bracket, ceiling or pendant

AdaptaBeacon 112 Series fluorescent fixtures use two

twin-tube compact fluorescent lamps to provide out-

standing light output with exceptional energy savings.

Internally fluted glass globes evenly distribute light.

The high impact glass dome and optional dome guard

deliver clarity and safety. Models are available for

bracket, ceiling or pendant mounting.

Hazardous Location Listings

Ambient Operating

Class Division Group Temp Temperature Code

I2A,B,C,D 40°C, 104°F T3B (75°C, 167°F)

Class I, Div. 2

112DV2(*)FL-N5 Series

* Insert B for bracket, C for ceiling, or P for pendant mount.

AdaptaBeacon®Division 2 Marine Rated Strobe

Approvals: UL 1638 and 1604 Listed, Type 3R, Type 4X, cUL

Listed, Marine UL 595 UXUB Listed, Marine UL 1598A Listed

Tech Info:

Electrical Rating: 120V 60 Hz, 0.1 Amps or 240V 60 Hz

0.05 Amps or 12 - 48V DC, 1.2 Amps or 250V DC, 0.1 Amps

Peak Candlepower: 800,000 cd

Flash Rate: 65 fpm

Mounts on: bracket, ceiling or pendant

These marine-rated, AdaptaBeacon strobes are designed

for high visual output and low maintenance in Division 2

applications. The high impact glass dome and optional

dome guard deliver clarity and safety. Models are

available for bracket, ceiling or pendant mounting.

May be mounted in any orientation.

Class I, Div. 2

107DV2(*)-ST Series

* Insert B for bracket, C for ceiling, or P

for pendant mount.

Hazardous Location Listings

Operating

Class Division Group Ambient Temp Temperature Code

I 1 A,B,C,D 104°F (40°C) T2 (300°C, 572°F)

131°F (55°C) T1 (450°C, 842°F)

149°F (65°C) T1 (450°C, 842°F)

II* 1 and 2* 104°F (40°C) T4A (120°C, 248°F)

III* 1 and 2* 131°F (55°C) T4 (135°C, 275°F)

149°F (65°C) T3C (160°C, 320°F)

12 13

Hazardous & Adverse Location Signals

AdaptaBeacon®Division 2 Diode Polarized Strobe

Approvals: UL 1638 and 1604 Listed, Type 3R, Type 4X,

cUL Listed, UL Listed

Tech Info:

Electrical Rating: 24V DC, 1.4 Amps

Peak Candlepower: 800,000 cd

Flash Rate: 65 fpm

Mounts on: bracket, ceiling or pendant

These diode polarized 107 Series AdaptaBeacon

strobes are designed for high visual output and

low maintenance in Division 2 electrically supervised

applications. The high impact glass dome and optional

dome guard deliver clarity and safety. Models are

available for bracket, ceiling or pendant mounting.

Class I, Div. 2, Diode Polarized

107DDV2(*)ST-G1 Series

* Insert B for bracket, C for ceiling, or P

for pendant mount.

Hazardous Location Listings

Operating

Class Division Group Ambient Temp Temperature Code

I 2 A,B,C,D 104°F (40°C) T2 (300°C, 572°F)

131°F (55°C) T1 (450°C, 842°F)

149°F (65°C) T1 (450°C, 842°F)

II* 1 and 2* 104°F (40°C) T4A (120°C, 248°F)

III* 1 and 2* 131°F (55°C) T4 (135°C, 275°F)

149°F (65°C) T3C (160°C, 320°F)

AdaptaBeacon®Division 2 Marine Rated Rotating Lights

Approvals: UL 1638 and 1604 Listed, Type 3R, Type 4X, cUL

Listed, Marine UL 595 UXUB Listed, Marine UL 1598A Listed

Tech Info:

Electrical Rating: 120V 50/60 Hz, 0.35 Amps or 240V

50/60 Hz, 0.1 Amps

Peak Candlepower: 3,328 cd @120V, 2914 cd @240V

Rotations per Minute: 75

Mounts on: bracket, ceiling or pendant

The marine-rated 107 Series AdaptaBeacon rotating

lights deliver high visual output and low maintenance in

a solid Division 2 package. The high impact glass dome

and optional dome guard deliver clarity and safety.

Models are available for bracket, ceiling or pendant

mounting.

Class I, Div. 2

107DV2(*)-RINH Series

* Insert B for bracket, C for ceiling or P

for pendant mount.

Hazardous Location Listings

Operating

Class Division Group Ambient Temp Temperature Code

I 2 A,B,C,D 104°F (40°C) (460°C, 860°F)

131°F (55°C) (475°C, 887°F)

149°F (65°C) (485°C, 905°F)

II* 1 and 2* 104°F (40°C) T4A (120°C, 248°F)

III* 1 and 2* 131°F (55°C) T4 (135°C, 275°F)

149°F (65°C) T3C (160°C, 320°F)

AdaptaBeacon®Division 2 Fluorescent Lights

Approvals: UL 1570 and 844 Listed, Type 3R, CSA C22.2

No. 137 Certified

Tech Info:

Electrical Rating: 120V 60 Hz

Peak Candlepower: 800,000 cd

Mounts on: bracket, ceiling or pendant

AdaptaBeacon 112 Series fluorescent fixtures use two

twin-tube compact fluorescent lamps to provide out-

standing light output with exceptional energy savings.

Internally fluted glass globes evenly distribute light.

The high impact glass dome and optional dome guard

deliver clarity and safety. Models are available for

bracket, ceiling or pendant mounting.

Hazardous Location Listings

Ambient Operating

Class Division Group Temp Temperature Code

I2A,B,C,D 40°C, 104°F T3B (75°C, 167°F)

Class I, Div. 2

112DV2(*)FL-N5 Series

* Insert B for bracket, C for ceiling, or P for pendant mount.

AdaptaBeacon®Division 2 Marine Rated Strobe

Approvals: UL 1638 and 1604 Listed, Type 3R, Type 4X, cUL

Listed, Marine UL 595 UXUB Listed, Marine UL 1598A Listed

Tech Info:

Electrical Rating: 120V 60 Hz, 0.1 Amps or 240V 60 Hz

0.05 Amps or 12 - 48V DC, 1.2 Amps or 250V DC, 0.1 Amps

Peak Candlepower: 800,000 cd

Flash Rate: 65 fpm

Mounts on: bracket, ceiling or pendant

These marine-rated, AdaptaBeacon strobes are designed

for high visual output and low maintenance in Division 2

applications. The high impact glass dome and optional

dome guard deliver clarity and safety. Models are

available for bracket, ceiling or pendant mounting.

May be mounted in any orientation.

Class I, Div. 2

107DV2(*)-ST Series

* Insert B for bracket, C for ceiling, or P

for pendant mount.

Hazardous Location Listings

Operating

Class Division Group Ambient Temp Temperature Code

I 1 A,B,C,D 104°F (40°C) T2 (300°C, 572°F)

131°F (55°C) T1 (450°C, 842°F)

149°F (65°C) T1 (450°C, 842°F)

II* 1 and 2* 104°F (40°C) T4A (120°C, 248°F)

III* 1 and 2* 131°F (55°C) T4 (135°C, 275°F)

149°F (65°C) T3C (160°C, 320°F)

1514

Low-Profile Signals

Compaxx 117 Series Strobe

Approvals: Type 4X, UL Listed, cUL Listed

Tech Info:

Electrical Rating: 12-80V DC, 120V AC, 240V AC

Peak Candlepower: 800,000 cd

Mounts on: surface

The 117 Series Compaxx strobes deliver low-profile, high

visibility signaling. The units provide bright visuals by

using a linear strobe tube inside a shatter-resistant

polycarbonate fresnel lens. The black, polycarbonate

ABS blend base is also shatter resistant. Suitable for

indoor or outdoor installation.

Type 4X

117R Series

Low-Profile Signals

Doing more with less — less space that

is. That’s what Edwards’ family of

low-profile signals is all about. With

height requirements as little as a few

inches, we can deliver the message in

just about any space. But don’t think

low-profile means you need to lower

your expectations. You get all the

Edwards’ brightness, connection options

and flexibility. Because the only thing

we reduced is the size, none of the

performance

For Low-Profile Signals

Ordering Info See Page

55,

58-59

Type 4X Compaxx®Series Flashing Lights

Approvals: UL 1638 Listed, Type 4X, cUL Listed

Tech Info:

Electrical Rating: 24V DC, 0.610 Amps or 120V AC,

0.150 Amps

Max Candlepower: 879 (120V version)

Flash Rate: 65 fpm

Mounts on: 1/2" conduit or surfaces

Compaxx 114 Series flashing lights are ideal solutions for

process-control and OEM applications. They deliver bright,

clear signals through a shatter resistant polycarbonate

fresnel lens and PLC compatibility. They are also available

in convenient quantity six-unit packages.

Type 4X, PLC Compatible

114FIN Series

Signal Input Load Characteristics*

Cat. Operating Max. off state Continuous Surge (inrush/duration)

No. Voltage leak current (mA) Current (mA) Amps/Milliseconds

114FIN-G1 Series 24V DC 25 25 7A Exponentially Decaying

114FIN-N5 Series 120V AC 25 25 0.8A Exponentially Decaying

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

1514

Low-Profile Signals

Compaxx 117 Series Strobe

Approvals: Type 4X, UL Listed, cUL Listed

Tech Info:

Electrical Rating: 12-80V DC, 120V AC, 240V AC

Peak Candlepower: 800,000 cd

Mounts on: surface

The 117 Series Compaxx strobes deliver low-profile, high

visibility signaling. The units provide bright visuals by

using a linear strobe tube inside a shatter-resistant

polycarbonate fresnel lens. The black, polycarbonate

ABS blend base is also shatter resistant. Suitable for

indoor or outdoor installation.

Type 4X

117R Series

Low-Profile Signals

Doing more with less — less space that

is. That’s what Edwards’ family of

low-profile signals is all about. With

height requirements as little as a few

inches, we can deliver the message in

just about any space. But don’t think

low-profile means you need to lower

your expectations. You get all the

Edwards’ brightness, connection options

and flexibility. Because the only thing

we reduced is the size, none of the

performance

For Low-Profile Signals

Ordering Info See Page

55,

58-59

Type 4X Compaxx®Series Flashing Lights

Approvals: UL 1638 Listed, Type 4X, cUL Listed

Tech Info:

Electrical Rating: 24V DC, 0.610 Amps or 120V AC,

0.150 Amps

Max Candlepower: 879 (120V version)

Flash Rate: 65 fpm

Mounts on: 1/2" conduit or surfaces

Compaxx 114 Series flashing lights are ideal solutions for

process-control and OEM applications. They deliver bright,

clear signals through a shatter resistant polycarbonate

fresnel lens and PLC compatibility. They are also available

in convenient quantity six-unit packages.

Type 4X, PLC Compatible

114FIN Series

Signal Input Load Characteristics*

Cat. Operating Max. off state Continuous Surge (inrush/duration)

No. Voltage leak current (mA) Current (mA) Amps/Milliseconds

114FIN-G1 Series 24V DC 25 25 7A Exponentially Decaying

114FIN-N5 Series 120V AC 25 25 0.8A Exponentially Decaying

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

1716

Low-Profile Signals

Type 4X Compaxx®Series Strobes

Approvals: UL 1638 Listed, Type 4X, cUL Listed

Tech Info:

Electrical Rating: 12-48V DC, 0.350 Amps or 120V AC,

0.1 Amps or 240V AC, 0.05 Amps

Max Candlepower: 175,000

Flash Rate: 65 fpm

Mounts on: 1/2" conduit or panel mount

Compaxx 114 Series strobes are the compact solutions

for OEM applications. They deliver bright, clear signals

through a shatter resistant polycarbonate fresnel lens.

They are also available in convenient quantity six-unit

packages for indoor and outdoor signaling. 12-48V DC

models are PLC compatible.

Type 4X, PLC Compatible

114ST Series

Signal Input Load Characteristics*

Cat. Operating Max. off state Continuous Surge (inrush/duration)

No. Voltage leak current (mA) Current (mA) Amps/Milliseconds

114ST-EK Series 12-48V DC 7 350 .45/.02

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

Type 4X Compaxx®Series Steady-on Lights

Approvals: UL 1638 Listed, Type 4X, cUL Listed

Tech Info:

Electrical Rating: 24V DC, 0.61 Amps or 120V AC,

0.150 Amps

Max Candlepower: 879 (120V version)

Mounts on: 1/2" conduit or panel mount

Compaxx 114 Series steady-on lights are ideal solutions for

compact and OEM applications. They deliver bright, clear

signals through a shatter resistant polycarbonate fresnel

lens and PLC compatibility. They are also available in

convenient quantity six-unit packages.

Type 4X, PLC Compatible

114SIN Series

Signal Input Load Characteristics*

Light Source Operating Max. off state Continuous Surge

Cat. No. Voltage leak current (mA) Current (mA) Current

114SIN-G1 Series 24V DC 25 25 7A Exponentially Decaying

114SIN-N5 Series 120V DC 25 25 0.8A Exponentially Decaying

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

AdaptaBeacon®Type 4X Flashing LED & Halogen Lights

Approvals: UL 1638 Listed, cUL Listed, CE Marked Low

Voltage Directive and EMC Directive, UL Listed Type 4X

Tech Info:

Electrical Rating: 24V DC, 0.77 Amps or 24V AC, 50/60 Hz,

0.77 Amps or 120V 50/60 Hz, 0.25 Amps or 24V DC, 0.065

Amps (LED unit) or 120V 50/60 Hz, 0.025 Amps (LED unit)

Max Candlepower (incandescent): 879 cd

Flash Rate: 65 fpm

Max Lumens (LED): 102

Mounts on: 1/2" conduit or panel mount

AdaptaBeacon 104FINH Series flashing halogen lights and

104FLED Series flashing LED lights deliver PLC compatible

visual indication in indoor and outdoor applications. Special

optics within a shatter resistant polycarbonate lens creates

especially bright output atop a polycarbonate/ABS blend

base.

Type 4X, PLC Compatible

104FINH & 104FLED Series

Signal Input Load Characteristics*

Cat. Operating Max. off state Continuous Surge (inrush/duration)

No. Voltage leak current (mA) Current (mA) Amps/Milliseconds

104FINH-G1 24V DC 25 320 1.2/100

104FINH-N5 120V DC 25 250 1.15/8

104FLED-G1 24V DC 4 65 .07/1

104FLED-N5 120V DC 5 25 .09/8

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

AdaptaBeacon®Type 4X Steady LED & Halogen Lights

Approvals: UL 1638 Listed, UL Listed Type 4X, cUL Listed,

CE Marked Low Voltage Directive and EMC Directive

Tech Info:

Electrical Rating: 24V DC, 0.77 Amps or 24V 50/60 Hz,

0.77 Amps or 120V 50/60 Hz, 0.25 Amps or 24V DC, 0.065

Amps (LED unit) or 120V 50/60 Hz, 0.025 Amps (LED unit)

Max Candlepower (incandescent): 879 cd

Max Lumens (LED): 102

Mounts on: 1/2" conduit or panel mount

AdaptaBeacon 104SINH Series steady-on halogen lights and

104SLED Series steady-on LED lights deliver PLC compatible

visual indication in indoor and outdoor applications.

Special optics within a shatter resistant polycarbonate lens

creates especially bright output atop a polycarbonate/ABS

blend base.

Type 4X, PLC Compatible

104SINH & 104SLED Series

Signal Input Load Characteristics*

Cat. Operating Max. off state Continuous Surge (inrush/duration)

No. Voltage leak current (mA) Current (mA) Amps/Milliseconds

104SINH-G1 24V DC 25 320 .36/1

104SINH-N5 120V DC 25 250 .5/8

104SLED-G1 24V DC 4 65 .07/1

104SLED-N5 120V DC 525 .09/8

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

1716

Low-Profile Signals

Type 4X Compaxx®Series Strobes

Approvals: UL 1638 Listed, Type 4X, cUL Listed

Tech Info:

Electrical Rating: 12-48V DC, 0.350 Amps or 120V AC,

0.1 Amps or 240V AC, 0.05 Amps

Max Candlepower: 175,000

Flash Rate: 65 fpm

Mounts on: 1/2" conduit or panel mount

Compaxx 114 Series strobes are the compact solutions

for OEM applications. They deliver bright, clear signals

through a shatter resistant polycarbonate fresnel lens.

They are also available in convenient quantity six-unit

packages for indoor and outdoor signaling. 12-48V DC

models are PLC compatible.

Type 4X, PLC Compatible

114ST Series

Signal Input Load Characteristics*

Cat. Operating Max. off state Continuous Surge (inrush/duration)

No. Voltage leak current (mA) Current (mA) Amps/Milliseconds

114ST-EK Series 12-48V DC 7 350 .45/.02

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

Type 4X Compaxx®Series Steady-on Lights

Approvals: UL 1638 Listed, Type 4X, cUL Listed

Tech Info:

Electrical Rating: 24V DC, 0.61 Amps or 120V AC,

0.150 Amps

Max Candlepower: 879 (120V version)

Mounts on: 1/2" conduit or panel mount

Compaxx 114 Series steady-on lights are ideal solutions for

compact and OEM applications. They deliver bright, clear

signals through a shatter resistant polycarbonate fresnel

lens and PLC compatibility. They are also available in

convenient quantity six-unit packages.

Type 4X, PLC Compatible

114SIN Series

Signal Input Load Characteristics*

Light Source Operating Max. off state Continuous Surge

Cat. No. Voltage leak current (mA) Current (mA) Current

114SIN-G1 Series 24V DC 25 25 7A Exponentially Decaying

114SIN-N5 Series 120V DC 25 25 0.8A Exponentially Decaying

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

AdaptaBeacon®Type 4X Flashing LED & Halogen Lights

Approvals: UL 1638 Listed, cUL Listed, CE Marked Low

Voltage Directive and EMC Directive, UL Listed Type 4X

Tech Info:

Electrical Rating: 24V DC, 0.77 Amps or 24V AC, 50/60 Hz,

0.77 Amps or 120V 50/60 Hz, 0.25 Amps or 24V DC, 0.065

Amps (LED unit) or 120V 50/60 Hz, 0.025 Amps (LED unit)

Max Candlepower (incandescent): 879 cd

Flash Rate: 65 fpm

Max Lumens (LED): 102

Mounts on: 1/2" conduit or panel mount

AdaptaBeacon 104FINH Series flashing halogen lights and

104FLED Series flashing LED lights deliver PLC compatible

visual indication in indoor and outdoor applications. Special

optics within a shatter resistant polycarbonate lens creates

especially bright output atop a polycarbonate/ABS blend

base.

Type 4X, PLC Compatible

104FINH & 104FLED Series

Signal Input Load Characteristics*

Cat. Operating Max. off state Continuous Surge (inrush/duration)

No. Voltage leak current (mA) Current (mA) Amps/Milliseconds

104FINH-G1 24V DC 25 320 1.2/100

104FINH-N5 120V DC 25 250 1.15/8

104FLED-G1 24V DC 4 65 .07/1

104FLED-N5 120V DC 5 25 .09/8

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

AdaptaBeacon®Type 4X Steady LED & Halogen Lights

Approvals: UL 1638 Listed, UL Listed Type 4X, cUL Listed,

CE Marked Low Voltage Directive and EMC Directive

Tech Info:

Electrical Rating: 24V DC, 0.77 Amps or 24V 50/60 Hz,

0.77 Amps or 120V 50/60 Hz, 0.25 Amps or 24V DC, 0.065

Amps (LED unit) or 120V 50/60 Hz, 0.025 Amps (LED unit)

Max Candlepower (incandescent): 879 cd

Max Lumens (LED): 102

Mounts on: 1/2" conduit or panel mount

AdaptaBeacon 104SINH Series steady-on halogen lights and

104SLED Series steady-on LED lights deliver PLC compatible

visual indication in indoor and outdoor applications.

Special optics within a shatter resistant polycarbonate lens

creates especially bright output atop a polycarbonate/ABS

blend base.

Type 4X, PLC Compatible

104SINH & 104SLED Series

Signal Input Load Characteristics*

Cat. Operating Max. off state Continuous Surge (inrush/duration)

No. Voltage leak current (mA) Current (mA) Amps/Milliseconds

104SINH-G1 24V DC 25 320 .36/1

104SINH-N5 120V DC 25 250 .5/8

104SLED-G1 24V DC 4 65 .07/1

104SLED-N5 120V DC 525 .09/8

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

18 19

Low-Profile Signals

AdaptaBeacon®Type 4X Strobes

Approvals: UL 1638 Listed, UL Listed Type 4X, cUL Listed,

CE Marked Low Voltage directive and EMC Directive

Tech Info:

Electrical Rating: 120V 50/60 Hz, 0.12 Amps

Max Candlepower: 300,000 cd

Flash Rate: 65 fpm

Mounts on: 1/2" conduit or panel mount

The AdaptaBeacon 104ST Series strobes are great

solutions for light duty applications requiring intermit-

tent signaling. Special optics within a shatter resistant

polycarbonate lens create an especially bright output for

indoor and outdoor uses. Situated atop a polycarbon-

ate/ABS blend base, the fixture is immune to shock and

vibration.

Type 4X, PLC Compatible

104ST Series

Signal Input Load Characteristics*

Cat. Operating Max. off state Continuous Surge (inrush/duration)

No. Voltage leak current (mA) Current (mA) Amps/Milliseconds

104ST-N5 120V AC 25 120 2.1/1

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

AdaptaBeacon®Industrial Truck Strobe

Twist-On Lens, Multi-Voltage

3000SD-EK Series

Approvals:

Tech Info:

Electrical Rating: 1.5 Joule Strobe, 12-48V DC

Peak Candlepower: 150,000 cd

Flash rate: 80 fpm

Mounts on: flange mount

The low-voltage 3000SD-EK Series AdaptaBeacon signals

are surface, flange mount strobes. Available with six lens

colors, the light flashes at 80 nominal single flashes per

minute. The strobe is rated at 1.5 Joules. The unit draws

exceptionally low current for a 12-48 V DC unit. The

twist on-off lens makes for easy strobe tube and/or lens

replacement. The 3000SD-EK also features a fully gasket-

ed lens for environmental integrity.

18 19

Low-Profile Signals

AdaptaBeacon®Type 4X Strobes

Approvals: UL 1638 Listed, UL Listed Type 4X, cUL Listed,

CE Marked Low Voltage directive and EMC Directive

Tech Info:

Electrical Rating: 120V 50/60 Hz, 0.12 Amps

Max Candlepower: 300,000 cd

Flash Rate: 65 fpm

Mounts on: 1/2" conduit or panel mount

The AdaptaBeacon 104ST Series strobes are great

solutions for light duty applications requiring intermit-

tent signaling. Special optics within a shatter resistant

polycarbonate lens create an especially bright output for

indoor and outdoor uses. Situated atop a polycarbon-

ate/ABS blend base, the fixture is immune to shock and

vibration.

Type 4X, PLC Compatible

104ST Series

Signal Input Load Characteristics*

Cat. Operating Max. off state Continuous Surge (inrush/duration)

No. Voltage leak current (mA) Current (mA) Amps/Milliseconds

104ST-N5 120V AC 25 120 2.1/1

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

AdaptaBeacon®Industrial Truck Strobe

Twist-On Lens, Multi-Voltage

3000SD-EK Series

Approvals:

Tech Info:

Electrical Rating: 1.5 Joule Strobe, 12-48V DC

Peak Candlepower: 150,000 cd

Flash rate: 80 fpm

Mounts on: flange mount

The low-voltage 3000SD-EK Series AdaptaBeacon signals

are surface, flange mount strobes. Available with six lens

colors, the light flashes at 80 nominal single flashes per

minute. The strobe is rated at 1.5 Joules. The unit draws

exceptionally low current for a 12-48 V DC unit. The

twist on-off lens makes for easy strobe tube and/or lens

replacement. The 3000SD-EK also features a fully gasket-

ed lens for environmental integrity.

Multi-Status Signals

Sometimes you’ve got a lot to say. Now

there’s no reason you can’t say it all with

a single visual signal. Edwards’ multi-

status signals flash, light, steady, and

sound in more ways than you’ll ever

need. So you can consolidate your sig-

naling footprint and your employees’

attention. With technology break-

throughs and proven solutions, we can

show you the easy way to configure and

place multi-status solutions.

Multi-Status Signals

20 21

For Multi-Status Signals

Ordering Info See Page

52-55

57-58

AdaptaLight®Stackable Beacon

PLC compatible

101 Series

Tech Info:

Cat Module Nominal Flash Replacement Replacement Peak

No. Type Voltage Current Rate Horn Light Source Candlepower

101BS-E1 Base Unit w/Horn 12V DC 0.05A (max) - 118-E1 - -

101BS-G1 with Horn 24V DC 0.05A (max) - 118-G1 - -

101BS-N5 (85 dB at 10 feet) 120V AC 50/60 Hz 0.05A (max) - 123A-N5 - -

101FIN*-E1 Flashing Incandescent 12V DC 1.0A 65 fpm - Industry Trade No. 94(1) 2374

101FINH*-G1 Flashing Halogen 24V DC 0.32A 65 fpm - 50LMP-9WH-D(2) 653

101FINH*-N5 Flashing Halogen 120V AC 50/60 Hz 0.11A 65 fpm - 50LMP-12WH-D(3) 879

101FLED**-G1 Flashing LED 24V DC 0.065A 65 fpm - - color

101FLED**-N5 Flashing LED 120V AC 50/60 Hz 0.025A 65 fpm - - dependent

101SIN*-E1 Steady-on Incandescent 12V DC 1.0A - - Industry Trade No. 94(1) 2374

101SINH*-G1 Steady-on Halogen 24V DC 0.32A - - 50LMP-9WH-D(2) 653

101SINH*-N5 Steady-on Halogen 120V AC 50/60 Hz 0.11A - - 50LMP-12WH-D(3) 876

101SLED**-G1 Steady-on LED 24V DC 0.065A - - - color

101SLED**-N5 Steady-on LED 120V AC 50/60 Hz 0.025A - - - dependent

101ST*-E1 Strobe 12V DC 0.5A 65 fpm - 91B-ST(4) 300,000

101ST*-G1 Strobe 24V DC 0.3A 65 fpm - 91B-ST(4) 300,000

101ST*-N5 Strobe 120V AC 50/60 Hz 0.12A 65 fpm - 91B-ST(4) 300,000

*Insert lens color: R - red, A - amber, B - blue, G - green, M - magenta, C - clear

**Insert lens and LED color: R - red, A - amber, B - blue, G - green

(1) Projected lamp life based on manufacturer's calculated lamp life at 65 fpm and 50% duty cycle is 1,520 hours.

(2) Projected lamp life based on manufacturer's calculated lamp life at 65 fpm and 50% duty cycle is 15,000 hours.

Can also be replaced with Industry Trade No. 1692.

(3) Projected lamp life based on manufacturer's calculated lamp life at 65 fpm and 50% duty cycle is 25,000 hours.

Can also be replaced with Industry Trade No. 15T7DC.

(4) Strobe tube life at operating power to 75% efficiency is 3,000 hours.

Approvals: UL 1638 Listed, cUL Listed

Tech Info:

Electrical Rating: 12V DC, 24V DC, 120V AC 50/60 Hz

Lamp Type: Seven gasketed modules: steady-on or flash-

ing incandescent, steady-on or flashing halogen, steady-

on or flashing LED, and strobe

Peak Candlepower: 300,000 cd strobe

Flash Rate: 65 fpm

Sound Output: Base unit comes with 85 dB pulsating horn

Mounts on: Surface or 1/2" NPT conduit

The PLC compatible AdaptaLight Stackable Beacon is a

unique audible-visual signaling device which can contain

up to 5 light modules and a pulsating horn in a single

“stack” for visibility over longer distances. The base con-

tains a pulsating horn that can be operated as a sixth

independent signal or in conjunction with any one of the

light modules.The vibration-resistant, heavy-duty light

modules are stackable in any combination and require no

wiring for rearrangement with screw terminals in the

base. Units are connected through solid copper busses.

Multi-Status Signals

Sometimes you’ve got a lot to say. Now

there’s no reason you can’t say it all with

a single visual signal. Edwards’ multi-

status signals flash, light, steady, and

sound in more ways than you’ll ever

need. So you can consolidate your sig-

naling footprint and your employees’

attention. With technology break-

throughs and proven solutions, we can

show you the easy way to configure and

place multi-status solutions.

Multi-Status Signals

20 21

For Multi-Status Signals

Ordering Info See Page

52-55

57-58

AdaptaLight®Stackable Beacon

PLC compatible

101 Series

Tech Info:

Cat Module Nominal Flash Replacement Replacement Peak

No. Type Voltage Current Rate Horn Light Source Candlepower

101BS-E1 Base Unit w/Horn 12V DC 0.05A (max) - 118-E1 - -

101BS-G1 with Horn 24V DC 0.05A (max) - 118-G1 - -

101BS-N5 (85 dB at 10 feet) 120V AC 50/60 Hz 0.05A (max) - 123A-N5 - -

101FIN*-E1 Flashing Incandescent 12V DC 1.0A 65 fpm - Industry Trade No. 94(1) 2374

101FINH*-G1 Flashing Halogen 24V DC 0.32A 65 fpm - 50LMP-9WH-D(2) 653

101FINH*-N5 Flashing Halogen 120V AC 50/60 Hz 0.11A 65 fpm - 50LMP-12WH-D(3) 879

101FLED**-G1 Flashing LED 24V DC 0.065A 65 fpm - - color

101FLED**-N5 Flashing LED 120V AC 50/60 Hz 0.025A 65 fpm - - dependent

101SIN*-E1 Steady-on Incandescent 12V DC 1.0A - - Industry Trade No. 94(1) 2374

101SINH*-G1 Steady-on Halogen 24V DC 0.32A - - 50LMP-9WH-D(2) 653

101SINH*-N5 Steady-on Halogen 120V AC 50/60 Hz 0.11A - - 50LMP-12WH-D(3) 876

101SLED**-G1 Steady-on LED 24V DC 0.065A - - - color

101SLED**-N5 Steady-on LED 120V AC 50/60 Hz 0.025A - - - dependent

101ST*-E1 Strobe 12V DC 0.5A 65 fpm - 91B-ST(4) 300,000

101ST*-G1 Strobe 24V DC 0.3A 65 fpm - 91B-ST(4) 300,000

101ST*-N5 Strobe 120V AC 50/60 Hz 0.12A 65 fpm - 91B-ST(4) 300,000

*Insert lens color: R - red, A - amber, B - blue, G - green, M - magenta, C - clear

**Insert lens and LED color: R - red, A - amber, B - blue, G - green

(1) Projected lamp life based on manufacturer's calculated lamp life at 65 fpm and 50% duty cycle is 1,520 hours.

(2) Projected lamp life based on manufacturer's calculated lamp life at 65 fpm and 50% duty cycle is 15,000 hours.

Can also be replaced with Industry Trade No. 1692.

(3) Projected lamp life based on manufacturer's calculated lamp life at 65 fpm and 50% duty cycle is 25,000 hours.

Can also be replaced with Industry Trade No. 15T7DC.

(4) Strobe tube life at operating power to 75% efficiency is 3,000 hours.

Approvals: UL 1638 Listed, cUL Listed

Tech Info:

Electrical Rating: 12V DC, 24V DC, 120V AC 50/60 Hz

Lamp Type: Seven gasketed modules: steady-on or flash-

ing incandescent, steady-on or flashing halogen, steady-

on or flashing LED, and strobe

Peak Candlepower: 300,000 cd strobe

Flash Rate: 65 fpm

Sound Output: Base unit comes with 85 dB pulsating horn

Mounts on: Surface or 1/2" NPT conduit

The PLC compatible AdaptaLight Stackable Beacon is a

unique audible-visual signaling device which can contain

up to 5 light modules and a pulsating horn in a single

“stack” for visibility over longer distances. The base con-

tains a pulsating horn that can be operated as a sixth

independent signal or in conjunction with any one of the

light modules.The vibration-resistant, heavy-duty light

modules are stackable in any combination and require no

wiring for rearrangement with screw terminals in the

base. Units are connected through solid copper busses.

22 23

Triliptical®Stackable Status Indicator

DeviceNetTM, PLC compatible

102 Series

Chameleon®Multi-Status Indicator

Approvals: UL 1638 Listed, Type 3R, Type 4X and IP65

Rated, cUL Listed

Tech Info:

Electrical Rating: 120V 50/60 Hz, 24V DC

Max Lumens: 307

Mounts on: 3/4" NPT conduit or surface

With 3 LED signals in one compact housing, the PLC

compatible Chameleon 108 Series functions as either a

steady on or flashing visual signal. Any or all three lights

can be activated by a PLC or contact closure. The first

light activated will illuminate either steady or flashing

(set by an internal jumper). If a second light is activated,

the Chameleon cycles between the two colors. A third

activation causes the Chameleon to cycle between all

three colors: red, amber, and green or red, amber, and

blue. One additional lens module and light source –

strobe, halogen, incandescent or LED – can be added.

The 108I Series features a multi-tone base module.

The tone can be operated as an additional signal or in

conjunction with any of the visual signals. The 108 is also

DeviceNet compatible, vibration resistant and features

molded-in gasketed lens modules.

PLC Compatible, DeviceNetTM

108I & 108 DN Series

Tech Info:

Catalog Electrical Lamp Replacement Lamp Life (hours) Manufacturer's

No.Description Ratings Ratings Lamp Calculated# Projected## Light Output

102TBS-G1 Base Unit - Use with 24V DC, 1.75A+ N/A N/A N/A N/A N/A

102TBS-N5 optional horn assy 120V AC, 0.60A+

102DMBS-G1 Mini base for 24V DC, 1.75A+ N/A N/A N/A N/A N/A

102DMBS-N5 direct panel mount 120V AC, 0.60A+

102PMBS-G1 Mini base for 3/4" 24V DC, 1.75A+ N/A N/A N/A N/A N/A

102PMBS-N5 (19mm) conduit mt 120V AC, 0.60A+

102SIGST-G1 Optional Tone 24V DC, 0.05A N/A N/A N/A N/A N/A

102SIGST-N5 Module 120V AC, 0.05A

102SIGMT-G1 24V DC, 0.05A N/A N/A N/A N/A N/A

102SIGMT-N5 120V AC, 0.05A

102PMF Pipe Mount Flange N/A N/A N/A N/A N/A N/A

102MP-4 (4") Pipe Extensions (for use N/A N/A N/A N/A N/A N/A

102MP-10 (10") with Pipe Mount Flange) N/A N/A N/A N/A N/A N/A

102MP-15 (15") N/A N/A N/A N/A N/A N/A

102LM-* Lens Module N/A N/A N/A N/A N/A N/A

102LS-SINH-G1 Steady-on Halogen 24V DC, 0.32A 9 Watts 50LMP-9WH 12,000 — 653 peak candela

102LS-SINH-N5 Light Source 120V AC, 0.11A 12 Watts 50LMP-12WH 20,000 — 879 peak candela

102LS-SIN-G1 Steady-on Incandescent 24V DC, 0.32A 10 Watts Ind. Trade 303 10,000 — 829 peak candela

102LS-SIN-N5 Light Source 120V AC, 0.08A 10 Watts 50LMP-10W 2,500 — 829 peak candela

102LS-FINH-G1 Flashing Halogen 24V DC, 0.32A 9 Watts 50LMP-9WH 12,000 15,000 653 peak candela

102LS-FINH-N5 Light Source 120V AC, 0.11A 12 Watts 50LMP-12WH 20,000 25,000 879 peak candela

102LS-FIN-G1 Flashing Incandescent 24V DC, 0.32A 10 Watts Ind. Trade 303 10,000 12,500 829 peak candela

102LS-FIN-N5 Light Source 120V AC, 0.08A 10 Watts 50LMP-10W 2,500 3,000 829 peak candela

102LS-ST-G1 Strobe 24V DC, 0.30A 3 Joule N/A 3,000### — 300,000 peak candela

102LS-ST-N5 Light Source 120V AC, 0.12A 3 Joule N/A 3,000### — 300,000 peak candela

102LS-SLEDA-G1** Steady-on LED 24V DC — N/A 120,000 — 4346 peak candela

102LS-SLED(++)-G1** Light Source 0.062A 1821 peak candela

102LS-SLEDA-N5** 120V AC — N/A 120,000 — 4346 peak candela

102LS-SLED(++)-N5** 0.022A 1821 peak candela

102LS-FLEDA-G1** Flashing LED 24V DC — N/A 120,000 — 4346 peak candela

102LS-FLED(++)-G1** Light Source 0.062A 1821 peak candela

102LS-FLEDA-N5** 120V AC — N/A 120,000 — 4346 peak candela

102LS-FLED(++)-N5** 0.022A 1821 peak candela

102TBS-DN-G1 DeviceNet Base Unit 24V DC, 1.75A+ N/A N/A N/A N/A N/A

102TBS-DN-N5 120V AC, 0.60A+

102SIGMT-DN-G1 DeviceNet Base Mounted 24V DC, 0.05A N/A N/A N/A N/A N/A

+Currents shown are for a stackable with 5 light modules. ++Lens and LED color (B - blue, G - green, R - red or W - white)

*Lens module color (A - amber/orange, B - blue, C - clear, G - green, R - red, Y - yellow)

** LED light sources must be used with the corresponding color lens module #At nominal operating voltage. ##Projected lamp life based on manufacturer's

calculated lamp life @ 65 fpm and 50% duty cycle. ###Strobe tube life @ operating power to 75% efficiency.

Approvals: UL 1638, CE Marked low voltage directive &

EMC directive, Type 3R, Type 4X, IP65 Rated, cUL Listed

Tech Info: Electrical Rating: 24V DC, 120V AC

Lamp Type: Seven interchangeable modules: steady-on

or flashing incandescent, steady-on or flashing halogen,

steady-on or flashing LED and strobe

Sound Output: 85 dB @ 5 feet

Mounts on: Surface or 3/4" NPT conduit

The DeviceNet, PLC-compatible Triliptical Stackable

Status Indicator can contain up to 5 light modules and

a pulsating horn in a single stack of gasketed modules.

Bases available in three models: conduit/surface mount,

with tone module or with DeviceNet interface. The

Triliptical diffusion optic lenses are available in six colors.

Double optics and the triliptical design provides an

increased viewing area without increasing the base

diameter. Modules are easily stacked with an internal

retaining assembly. Available with single or selectable

tone module. No wiring for module rearrangement.

Multi-Status Signals

Chameleon™Type 4X LED Multi-Status Indicator

Type 4X, PLC Compatible

Weatherproof

103 & 103I Series

Approvals: UL 1638 Listed, Type 4X, cUL Listed

Tech Info:

Operating Functions: Steady-on or 1-, 2-, or 3-color flashing

(Intelligent unit only “I”)

Electrical Rating: 120V 50/60 Hz or 24V DC

Max Lumens: 307 Mounts on: 1/2" conduit or panel

It’s three signals in one compact unit. The Chameleon 103I

Series features an onboard processor that allows the unit to

function as either a flashing or steady signal. Each fixture holds

three powerful LED arrays of three different colors. Using a PLC

or contact closure, you can choose to have a single color illumi-

nated steady-on or flashing. Activating two lamps cycles the

device between two colors. A third activation cycles between all

three colors. The Chameleon 103 Series has all the functionality

of the 103I, with the exception of the onboard processor – sig-

nal operation is then controlled through a PLC’s ladder logic.

Available in red, blue, and amber; and red, green and amber.

Signal Input Load Characteristics*

Cat. Operating Max. off state Continuous Surge (inrush/duration)

No. Voltage leak current (mA) Current (mA) Amps/Milliseconds

103-RBA-G1 24V DC 5 65 0.070/8

103-RGA-G1 24V DC 5 65 0.070/8

103-RBA-N5 120V DC 5 55 0.100/8

103-RGA-N5 120V DC 5 55 0.100/8

103I-RBA-G1 24V DC 5 55 0.070/8

103I-RGA-G1 24V DC 5 55 0.070/8

103I-RBA-N5 120V DC 5 45 0.100/8

103I-RGA-N5 120V DC 5 45 0.100/8

* This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.