User Manual UM EN FL SWITCH LM Installation Directions

2016-08-16

• Please observe the following notes
  • User group of this manual
  • Explanation of symbols used and signal words
  • General terms and conditions of use for technical documentation
  • Statement of legal authority
  • How to contact us
• Table of contents
• 1 Lean Managed Switch
  • 1.1 Properties
    • 1.1.1 Front view/operating elements/ slots of the LMS
    • 1.1.2 Dimensions of the LMS
    • 1.1.3 Status and diagnostic indicators
    • 1.1.4 Firmware versions and their functions
  • 1.2 Mounting/removal
    • 1.2.1 Mounting and removing the LMS
    • 1.2.2 Mounting
    • 1.2.3 Removal
  • 1.3 Installing the Lean Managed Switch
    • 1.3.1 Connecting the supply voltage
    • 1.3.2 Alarm contact
    • 1.3.3 RS-232 interface for external management
    • 1.3.4 Grounding
• 2 Startup and functions
  • 2.1 Basic settings
    • 2.1.1 Default upon delivery/default settings
    • 2.1.2 Assigning IP parameters
    • 2.1.3 Flowchart after a restart
  • 2.2 Frame switching
    • 2.2.1 Store-and-forward
    • 2.2.2 Multi-address function
    • 2.2.3 Learning addresses
    • 2.2.4 Prioritization (Quality of Service)
• 3 Configuration and diagnostics
  • 3.1 Factory Manager
    • 3.1.1 General function
    • 3.1.2 Assigning IP parameters
    • 3.1.3 Configuration and diagnostics
  • 3.2 Web-based management (WBM)
    • 3.2.1 General function
    • 3.2.2 Requirements for the use of WBM
    • 3.2.3 Functions/information in WBM
    • 3.2.4 Carrying out the firmware/software update
  • 3.3 Simple Network Management Protocol (SNMP)
    • 3.3.1 General function
    • 3.3.2 Schematic view of SNMP management
    • 3.3.3 RFC1213 MIB - MIB II
    • 3.3.4 Bridge MIB (1.3.6.1.2.1.17)
    • 3.3.5 Private MIBs
  • 3.4 Management via local RS-232 communication interface
    • 3.4.1 General function
    • 3.4.2 User interface functions
    • 3.4.3 Starting with faulty software
• 4 Rapid Spanning Tree
  • 4.1 General function
    • 4.1.1 General function
  • 4.2 RSTP startup
    • 4.2.1 Enabling RSTP on all switches involved
    • 4.2.2 RSTP fast ring detection
    • 4.2.3 Connection failure - Example
    • 4.2.4 Example topologies
    • 4.2.5 Configuration notes for Rapid Spanning Tree
  • 4.3 Large Tree support
    • 4.3.1 Large Tree support
    • 4.3.2 Properties of Large Tree support
• 5 Multicast filtering
  • 5.1 Basics
  • 5.2 Dynamic multicast groups
    • 5.2.1 Internet Group Management Protocol (IGMP)
  • 5.3 Multicast source detection
    • 5.3.1 Properties of multicast source detection
• 6 Virtual Local Area Network (VLAN)
  • 6.1 Basics
  • 6.2 Enabling the VLAN web pages in web-based management
    • 6.2.1 Management VLAN ID
    • 6.2.2 Changing the management VLAN ID
  • 6.3 General VLAN Configuration
  • 6.4 Current VLANs
    • 6.4.1 Static VLANs
    • 6.4.2 VLAN Port Configuration
    • 6.4.3 VLAN Port Configuration Table
  • 6.5 Setting up static VLANs
  • 6.6 VLAN and (R)STP
• 7 Technical data
  • General data
  • Supply voltage
  • Interfaces
  • Mechanical tests
  • Conformance with EMC directives
  • Differences between this version and previous versions
  • 7.1 Ordering data
  • Products
  • Description
  • Order designation
  • Order No.
  • Pcs. / Pkt.
  • Accessories
  • Description
  • Order designation
  • Order No.
  • Pcs. / Pkt.